CBE: The Right Angle for Learning.

ERIC Educational Resources Information Center

Seitz, Fred

Designed for instructors at Beaufort Technical College (BTC) in South Carolina, this handbook provides a brief guide to competency-based education (CBE) and to the available resources at the college for assistance. Section 1 offers introductory comments on the concept of quality control and the five basic components of educational quality control.…

Mesh quality control for multiply-refined tetrahedral grids

NASA Technical Reports Server (NTRS)

Biswas, Rupak; Strawn, Roger

1994-01-01

A new algorithm for controlling the quality of multiply-refined tetrahedral meshes is presented in this paper. The basic dynamic mesh adaption procedure allows localized grid refinement and coarsening to efficiently capture aerodynamic flow features in computational fluid dynamics problems; however, repeated application of the procedure may significantly deteriorate the quality of the mesh. Results presented show the effectiveness of this mesh quality algorithm and its potential in the area of helicopter aerodynamics and acoustics.

Total quality assurance

NASA Astrophysics Data System (ADS)

Louzon, E.

1989-12-01

Quality, cost, and schedule are three factors affecting the competitiveness of a company; they require balancing so that products of acceptable quality are delivered, on time and at a competitive cost. Quality costs comprise investment in quality maintenance and failure costs which arise from failure to maintain standards. The basic principle for achieving the required quality at minimum cost is that of prevention of failures, etc., through production control, attention to manufacturing practices, and appropriate management and training. Total quality control involves attention to the product throughout its life cycle, including in-service performance evaluation, servicing, and maintenance.

[Quality control in anesthesiology].

PubMed

Muñoz-Ramón, J M

1995-03-01

The process of quality control and auditing of anesthesiology allows us to evaluate care given by a service and solve problems that are detected. Quality control is a basic element of care giving and is only secondarily an area of academic research; it is therefore a meaningless effort if the information does not serve to improve departmental procedures. Quality assurance procedures assume certain infrastructural requirements and an initial period of implementation and adjustment. The main objectives of quality control are the reduction of morbidity and mortality due to anesthesia, assurance of the availability and proper management of resources and, finally, the well-being and safety of the patient.

Defining the best quality-control systems by design and inspection.

PubMed

Hinckley, C M

1997-05-01

Not all of the many approaches to quality control are equally effective. Nonconformities in laboratory testing are caused basically by excessive process variation and mistakes. Statistical quality control can effectively control process variation, but it cannot detect or prevent most mistakes. Because mistakes or blunders are frequently the dominant source of nonconformities, we conclude that statistical quality control by itself is not effective. I explore the 100% inspection methods essential for controlling mistakes. Unlike the inspection techniques that Deming described as ineffective, the new "source" inspection methods can detect mistakes and enable corrections before nonconformities are generated, achieving the highest degree of quality at a fraction of the cost of traditional methods. Key relationships between task complexity and nonconformity rates are also described, along with cultural changes that are essential for implementing the best quality-control practices.

Materials Testing and Quality Control Soils, 3-28. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This instructional package on material testing and quality control of soils has been adapted from military curriculum materials for use in technical and vocational education programs. This short course presents basic information on soils as well as exploration, field identification, and laboratory procedures that will enable students completing…

Symptomatic Control in End-of-Life Patients.

PubMed

Alves, Mariana; Abril, Rita; Neto, Isabel Galriça

2017-01-31

End-of-life patients present a variety of symptoms that cause suffering for them and their respective families. Health professionals throughout their university, internship and medical careers are ill-prepared to manage and improve the quality of life of these patients. This article aims to provide basic skills in the symptomatic management of end-of-life patients, focusing in particular on the control of pain, dyspnoea, fatigue, nausea, vomiting and anorexia. It also aims to draw attention to basic concepts of control concerning refractory symptoms and palliative sedation.

Affective science perspectives on cancer control: Strategically crafting a mutually beneficial research agenda

PubMed Central

Ferrer, Rebecca A.; McDonald, Paige Green; Barrett, Lisa Feldman

2015-01-01

Cancer control research involves the conduct of basic and applied behavioral and social sciences to reduce cancer incidence, morbidity, and mortality, and improve quality of life. Given the importance of behavior in cancer control, fundamental research is necessary to identify psychological mechanisms underlying cancer risk, prevention, and management behaviors. Cancer prevention, diagnosis, and treatment are often emotionally-laden. As such, affective science research to elucidate questions related to basic phenomenological nature of emotion, stress, and mood is necessary to understand how cancer control can be hindered or facilitated by emotional experiences. To date, the intersection of basic affective science research and cancer control remains largely unexplored. The goal of this paper is to outline key questions in the cancer control research domain that provide an ecologically valid context for new affective science discoveries. We also provide examples of ways in which basic affective discoveries could inform future cancer prevention and control research. These examples are not meant to be exhaustive or prescriptive, but instead are offered to generate creative thought about the promise of a cancer research context for answering basic affective science questions. Together, these examples provide a compelling argument for fostering collaborations between affective and cancer control scientists. PMID:25987511

Educational Reform in Spain.

ERIC Educational Resources Information Center

Marchesi, Alvaro

1992-01-01

Reviews the Spanish educational system, focusing on reforms enacted in 1990. Discusses reform movement issues, including quality, curricular control, curricular homogeneity versus diversity, and influence of European context. Describes reform movement aims (i.e., extending basic education and modifying educational levels to improve quality) and…

Empowered diabetes management: life coaching and pharmacist counseling for employed adults with diabetes.

PubMed

Nishita, Christy; Cardazone, Gina; Uehara, Denise Lea; Tom, Tammy

2013-10-01

The Hawai'i Demonstration to Maintain Independence and Employment was a randomized controlled trial examining the effect of a participant-driven, multicomponent intervention on 190 employed adults with diabetes, 36% of whom were Asian and 35% of whom were Native Hawaiian or Pacific Islander. A no treatment concurrent control group was used, and the treatment group was provided an intervention that paired each participant with a life coach and a pharmacist counselor with whom they worked to achieve collaboratively chosen goals. Treatment fidelity data suggest that the intervention was largely implemented as planned. Life coaches and pharmacists performed key program functions with high to moderate adherence. The quality of their adherence to the intervention model ranged from basic to above basic and below basic to above basic for life coaches and pharmacists, respectively. Results of repeated-measures analysis of covariance analyses indicate that the intervention had a significant positive effect on participants' diabetes self-efficacy, quality of life, and body mass index but not on hemoglobin A1c levels. Further analyses examining just the treatment group indicate a dosage effect, with body mass index and quality of life outcomes optimized among participants who engaged in a greater number of sessions with life coaches and pharmacists. Implications of the study findings for practice are discussed.

The effect of strength training on quality of prolonged basic cardiopulmonary resuscitation.

PubMed

Abelairas-Gómez, Cristian; Barcala-Furelos, Roberto; Szarpak, Łukasz; García-García, Óscar; Paz-Domínguez, Álvaro; López-García, Sergio; Rodríguez-Núñez, Antonio

2017-01-01

Providing high-quality chest compressions and rescue breaths are key elements in the effectiveness of cardio-pulmonary resuscitation. To investigate the effects of a strength training programme on the quality of prolonged basic cardiopulmonary resuscitation on a manikin. This was a quasi-experimental trial. Thirty-nine participants with prior basic life support knowledge were randomised to an experimental or control group. They then performed a test of 10 min of chest compressions and mouth-to-mouth ventilation on manikins equipped with a skill reporter tool (baseline or test 1). The experimental group participated in a four-week strength training programme focused on the muscles involved in chest compressions. Both groups were subsequently tested again (test 2). After training, the experimental group significantly increased the mean depth of compression (53.7 ± 2.3 mm vs. 49.9 ± 5.9 mm; p = 0.003) and the correct compression fraction (68.2 ± 21.0% vs. 46.4 ± 29.1%; p = 0.004). Trained subjects maintained chest compression quality over time better than the control group. The mean tidal volume delivered was higher in the experimental than in the control group (701.5 ± 187.0 mL vs. 584.8 ± 113.6 mL; p = 0.040) and above the current resuscitation guidelines. In test 2, the percentage of rescue breaths with excessive volume was higher in the experi-mental group than in the controls (31.5 ± 19.6% vs. 15.6 ± 13.0%; p = 0.007). A simple strength training programme has a significant impact on the quality of chest compressions and its maintenance over time. Additional training is needed to avoid over-ventilation of potential patients.

Total Quality Management (TQM), an Overview

DTIC Science & Technology

1991-09-01

Quality Management (TQM). It discusses the reasons TQM is a current growth industry, what it is, and how one implements it. It describes the basic analytical tools, statistical process control, some advanced analytical tools, tools used by process improvement teams to enhance their own operations, and action plans for making improvements. The final sections discuss assessing quality efforts and measuring the quality to knowledge

78 FR 14450 - Approval and Promulgation of Implementation Plans; Tennessee; 110(a)(1) and (2) Infrastructure...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

... to address basic SIP requirements, including emissions inventories, monitoring, and modeling to... basic structural SIP elements such as modeling, monitoring, and emissions inventories that are designed...): Emission limits and other control measures. 110(a)(2)(B): Ambient air quality monitoring/data system. 110(a...

Sachet water quality and brand reputation in two low-income urban communities in greater Accra, Ghana.

PubMed

Stoler, Justin; Tutu, Raymond A; Ahmed, Hawa; Frimpong, Lady Asantewa; Bello, Mohammed

2014-02-01

Sachet water has become an important primary source of drinking water in western Africa, but little is known about bacteriologic quality and improvements to quality control given the recent, rapid evolution of this industry. This report examines basic bacteriologic indicators for 60 sachet water samples from two very low-income communities in Accra, Ghana, and explores the relationship between local perceptions of brand quality and bacteriologic quality after controlling for characteristics of the vending environment. No fecal contamination was detected in any sample, and 82% of total heterotrophic bacteria counts were below the recommended limit for packaged water. Sachets from brands with a positive reputation for quality were 90% less likely to present any level of total heterotrophic bacteria after controlling for confounding factors. These results contrast with much of the recent sachet water quality literature and may indicate substantial progress in sachet water regulation and quality control.

Sachet Water Quality and Brand Reputation in Two Low-Income Urban Communities in Greater Accra, Ghana

PubMed Central

Stoler, Justin; Tutu, Raymond A.; Ahmed, Hawa; Frimpong, Lady Asantewa; Bello, Mohammed

2014-01-01

Sachet water has become an important primary source of drinking water in western Africa, but little is known about bacteriologic quality and improvements to quality control given the recent, rapid evolution of this industry. This report examines basic bacteriologic indicators for 60 sachet water samples from two very low-income communities in Accra, Ghana, and explores the relationship between local perceptions of brand quality and bacteriologic quality after controlling for characteristics of the vending environment. No fecal contamination was detected in any sample, and 82% of total heterotrophic bacteria counts were below the recommended limit for packaged water. Sachets from brands with a positive reputation for quality were 90% less likely to present any level of total heterotrophic bacteria after controlling for confounding factors. These results contrast with much of the recent sachet water quality literature and may indicate substantial progress in sachet water regulation and quality control. PMID:24379244

Significance of biological resource collection and tumor tissue bank creation.

PubMed

Yu, Ying-Yan; Zhu, Zheng-Gang

2010-01-15

Progress in the molecular oncology of gastrointestinal carcinomas depends on high quality cancer tissues for research. Recent acceleration on new technological platforms as well as the "omics" revolution increases the demands on tissues and peripheral blood for research at the DNA, mRNA and protein levels. Tissue bank creation emerges as a priority. Tumor tissue banks are facilities that are organized to collect, store and distribute samples of tumor and normal tissue for further use in basic and translational cancer research. The samples are generally obtained immediately after excision, prior to fixation, to ensure optimal preservation of proteins and nucleic acids. It is possible for surgeons or pathologists to collect fresh tissue prospectively during their routine dissection procedures. Most tissue banks are "project-driven" tumor banks, which are specialized collections of tumor samples on which their research is based. Systematic collection of all available tumor tissue is much rarer. High quality tissue banks need the collaboration of clinicians and basic scientists, but also the informed consent of patients and ethical approval. Through the standard operation procedure, snap frozen fresh tissue collection, storage and quality control for cryopreserved tissues are the pivotal factors on tissue bank construction and maintaining. The purpose of the tissue bank creation is enhancing the quality and speed on both the basic and translational research on gastrointestinal cancer. The quality assurance and quality control are handled based on reviewing HE staining slides or touch imprint cytology by pathologists.

Quality Control Analysis of Selected Aspects of Programs Administered by the Bureau of Student Financial Assistance. Task 1 and Quality Control Sample; Error-Prone Modeling Analysis Plan.

ERIC Educational Resources Information Center

Saavedra, Pedro; And Others

Parameters and procedures for developing an error-prone model (EPM) to predict financial aid applicants who are likely to misreport on Basic Educational Opportunity Grant (BEOG) applications are introduced. Specifications to adapt these general parameters to secondary data analysis of the Validation, Edits, and Applications Processing Systems…

Affective science perspectives on cancer control: strategically crafting a mutually beneficial research agenda.

PubMed

Ferrer, Rebecca A; Green, Paige A; Barrett, Lisa Feldman

2015-05-01

Cancer control research involves the conduct of basic and applied behavioral and social sciences to reduce cancer incidence, morbidity, and mortality and improve quality of life. Given the importance of behavior in cancer control, fundamental research is necessary to identify psychological mechanisms underlying cancer risk, prevention, and management behaviors. Cancer prevention, diagnosis, and treatment are often emotionally laden. As such, affective science research to elucidate questions related to the basic phenomenological nature of emotion, stress, and mood is necessary to understand how cancer control can be hindered or facilitated by emotional experiences. To date, the intersection of basic affective science research and cancer control remains largely unexplored. The goal of this article is to outline key questions in the cancer control research domain that provide an ecologically valid context for new affective science discoveries. We also provide examples of ways in which basic affective discoveries could inform future cancer prevention and control research. These examples are not meant to be exhaustive or prescriptive but instead are offered to generate creative thought about the promise of a cancer research context for answering basic affective science questions. Together, these examples provide a compelling argument for fostering collaborations between affective and cancer control scientists. © The Author(s) 2015.

User's Guide for ERB 7 Matrix. Volume 1: Experiment Description and Quality Control Report for Year 1

NASA Technical Reports Server (NTRS)

Tighe, R. J.; Shen, M. Y. H.

1984-01-01

The Nimbus 7 ERB MATRIX Tape is a computer program in which radiances and irradiances are converted into fluxes which are used to compute the basic scientific output parameters, emitted flux, albedo, and net radiation. They are spatially averaged and presented as time averages over one-day, six-day, and monthly periods. MATRIX data for the period November 16, 1978 through October 31, 1979 are presented. Described are the Earth Radiation Budget experiment, the Science Quality Control Report, Items checked by the MATRIX Science Quality Control Program, and Science Quality Control Data Analysis Report. Additional material from the detailed scientific quality control of the tapes which may be very useful to a user of the MATRIX tapes is included. Known errors and data problems and some suggestions on how to use the data for further climatologic and atmospheric physics studies are also discussed.

Perceived parent-child relational qualities and parental behavioral and psychological control in Chinese adolescents in Hong Kong.

PubMed

Shek, Daniel T L

2006-01-01

Chinese secondary school students (N = 3,017) were asked to respond to instruments measuring their perceived parent-child relational qualities (parental trust of the child, child's trust of parents, child's readiness to communicate with parents, and child's satisfaction with parental control), parental behavioral control (including indicators of knowledge, expectation, monitoring, discipline, and demandingness), and parental psychological control. Results showed that parental trust of the child and child's trust of parents were positively related to child's readiness to communicate with the parents and satisfaction with parental control. While parental trust of the child and child's trust of parents were basically negatively related to different aspects of behavioral control (except parental knowledge), readiness to communicate with the parents and satisfaction with parental control were positively associated with parental control. Parent-child relational quality measures were negatively related to psychological control. Relative to measures of parental behavioral control, parental psychological control was a stronger predictor of parent-child relational qualities. The present findings clarify the parent-child relational quality correlates of parental behavioral and psychological control.

Advanced Taste Sensors Based on Artificial Lipids with Global Selectivity to Basic Taste Qualities and High Correlation to Sensory Scores

PubMed Central

Kobayashi, Yoshikazu; Habara, Masaaki; Ikezazki, Hidekazu; Chen, Ronggang; Naito, Yoshinobu; Toko, Kiyoshi

2010-01-01

Effective R&D and strict quality control of a broad range of foods, beverages, and pharmaceutical products require objective taste evaluation. Advanced taste sensors using artificial-lipid membranes have been developed based on concepts of global selectivity and high correlation with human sensory score. These sensors respond similarly to similar basic tastes, which they quantify with high correlations to sensory score. Using these unique properties, these sensors can quantify the basic tastes of saltiness, sourness, bitterness, umami, astringency and richness without multivariate analysis or artificial neural networks. This review describes all aspects of these taste sensors based on artificial lipid, ranging from the response principle and optimal design methods to applications in the food, beverage, and pharmaceutical markets. PMID:22319306

Individual quality explains association between plumage colouration, arrival dates and mate acquisition in yellow warblers (Setophaga petechia).

PubMed

Jones, Teri B; Drake, Anna; Green, David J

2014-05-07

In many bird species colour traits influence social dominance and breeding success. In our study we first evaluated whether the colour of the basic plumage (tail feathers grown at the end of the breeding season), that provides an index of individual quality, influenced winter habitat use by yellow warblers. We then evaluated whether winter habitat use (inferred using δ13C and δ15N signatures of winter grown greater-coverts) influenced alternate plumage colouration, after controlling for individual quality using basic plumage colouration. Finally, we investigated whether basic and alternate plumage colouration influenced arrival dates, mate acquisition, breeding phenology and reproductive success of yellow warblers breeding in southern (Revelstoke, B.C.) and arctic (Inuvik, N.W.T.) Canada. The colour (chroma and hue) of tail feathers, grown on the breeding grounds, was not related to subsequent winter habitat use. Greater covert and tail feather colour (chroma and hue) were correlated, suggesting genetics and/or individual quality played a role in pigment deposition. After controlling for individual difference in tail colour, δ13C values did not explain any variation in greater covert colour, but birds with high δ15N signatures had greater coverts with higher chroma. Male arrival dates varied with tail chroma in Revelstoke and tail hue in Inuvik. Males that arrived early paired with older and/or more colourful mates that initiated clutches earlier, and at one site (Revelstoke) were more likely to fledge young. In addition, in Revelstoke (but not Inuvik) males with high tail hue also acquired more colourful mates. In contrast, after controlling for individual differences in tail colour, greater covert colour did not affect male arrival date, the quality of the mate obtained or reproductive success in either population. Our results suggest that plumage colour effects on breeding phenology and mate acquisition result from differences in the intrinsic quality of individuals rather than a carry-over effect of winter habitat use.

Individual quality explains association between plumage colouration, arrival dates and mate acquisition in yellow warblers (Setophaga petechia)

PubMed Central

2014-01-01

Background In many bird species colour traits influence social dominance and breeding success. In our study we first evaluated whether the colour of the basic plumage (tail feathers grown at the end of the breeding season), that provides an index of individual quality, influenced winter habitat use by yellow warblers. We then evaluated whether winter habitat use (inferred using δ13C and δ15N signatures of winter grown greater-coverts) influenced alternate plumage colouration, after controlling for individual quality using basic plumage colouration. Finally, we investigated whether basic and alternate plumage colouration influenced arrival dates, mate acquisition, breeding phenology and reproductive success of yellow warblers breeding in southern (Revelstoke, B.C.) and arctic (Inuvik, N.W.T.) Canada. Results The colour (chroma and hue) of tail feathers, grown on the breeding grounds, was not related to subsequent winter habitat use. Greater covert and tail feather colour (chroma and hue) were correlated, suggesting genetics and/or individual quality played a role in pigment deposition. After controlling for individual difference in tail colour, δ13C values did not explain any variation in greater covert colour, but birds with high δ15N signatures had greater coverts with higher chroma. Male arrival dates varied with tail chroma in Revelstoke and tail hue in Inuvik. Males that arrived early paired with older and/or more colourful mates that initiated clutches earlier, and at one site (Revelstoke) were more likely to fledge young. In addition, in Revelstoke (but not Inuvik) males with high tail hue also acquired more colourful mates. In contrast, after controlling for individual differences in tail colour, greater covert colour did not affect male arrival date, the quality of the mate obtained or reproductive success in either population. Conclusions Our results suggest that plumage colour effects on breeding phenology and mate acquisition result from differences in the intrinsic quality of individuals rather than a carry-over effect of winter habitat use. PMID:24886073

Theoretical approach to society-wide environmental quality control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ayano, K.

1982-01-01

The study outlines the basis for a theory of societal control of environmental quality in the US based on the concepts and philosophy of company-wide quality control which has developed in Japan as a cross-disciplinary approach to problem-solving in the industrial realm. The basic concepts are: 1) every member of society, as a producer of environmental products and services for future generations, in principle has the responsibility to control the quality of his output; 2) environment quality is the quality of life, or the fitness of use of environment for humans; and 3) societal control is any activity necessary formore » quality production of environmental products and services continuously or in the long run. A motivator-hygiene theory of environmental quality is identified, and a proposal is made that the policy provision must be formulated differently between those aimed at hygiene factors of environmental quality and those aimed at motivators, the former in a collectivistic manner, the latter as an individual problem. The concept of societal cost of environmental quality is introduced. Based on the motivator-hygiene theory of environmental quality, the collectivistic and individual approaches are differentiated and discussed.« less

Particle counter as a tool to control pre-hydrolyzed coagulant dosing and rapid filtration efficiency in a conventional treatment system.

PubMed

Gumińska, Jolanta; Kłos, Marcin

2015-01-01

Filtration efficiency in a conventional water treatment system was analyzed in the context of pre-hydrolyzed coagulant overdosing. Two commercial coagulants of different aluminum speciation were tested. A study was carried out at a water treatment plant supplied with raw water of variable quality. The lack of stability of water quality caused many problems with maintaining the optimal coagulant dose. The achieved results show that the type of coagulant had a very strong influence on the effectiveness of filtration resulting from the application of an improper coagulant dose. The overdosing of high basicity coagulant (PAC85) caused a significant increase of fine particles in the outflow from the sedimentation tanks, which could not be retained in the filter bed due to high surface charge and the small size of hydrolysis products. When using a coagulant of lower basicity (PAC70), it was much easier to control the dose of coagulant and to adjust it to the changing water quality.

Review of nuclear pharmacy practice in hospitals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kawada, T.K.; Tubis, M.; Ebenkamp, T.

1982-02-01

An operational profile for nuclear pharmacy practice is presented, and the technical and professional role of nuclear pharmacists is reviewed. Key aspects of nuclear pharmacy practice in hospitals discussed are the basic facilities and equipment for the preparation, quality control, and distribution of radioactive drug products. Standards for receiving, storing, and processing radioactive material are described. The elements of a radiopharmaceutical quality assurance program, including the working procedures, documentation systems, data analysis, and specific control tests, are presented. Details of dose preparation and administration and systems of inventory control for radioactive products are outlined.

Nuclear Technology. Course 30: Mechanical Inspection. Module 30-1, Pump Inspection.

ERIC Educational Resources Information Center

Wasil, Ed; Espy, John

This first in a series of eight modules for a course titled Mechanical Inspection describes the type of pumps used in nuclear power plant systems, the basic operating principles of each type, and the inspection activities performed by the quality assurance/quality control technician. The module follows a typical format that includes the following…

Columbia/Willamette Skill Builders Consortium. Final Performance Report. Appendix 5B Anodizing Inc. (Aluminum Extrusion Manufacturing). Basic Measurement Math. Instructors' Reports and Sample Curriculum Materials.

ERIC Educational Resources Information Center

Taylor, Marjorie; And Others

Anodizing, Inc., Teamsters Local 162, and Mt. Hood Community College (Oregon) developed a workplace literacy program for workers at Anodizing. These workers did not have the basic skill competencies to benefit from company training efforts in statistical process control and quality assurance and were not able to advance to lead and supervisory…

Exploring the Link between Intrinsic Motivation and Quality

DTIC Science & Technology

1992-12-01

to and motivation for quality. " Effective human relations is basic to quality control," Fiegenbaum (1991) says. A major effect of this activity is... overjustification (explained later in this chapter). Deming "fervently believes in the intrinsic motivation of mankind," wrote Gabor (1990, p. 13). "All...see the congruence between Deming’s philosophy and overjustification theory (Deci, 1975). This is the idea that extrinsic motivators can be emphasized

The World Optical Depth Research and Calibration Center (WORCC) quality assurance and quality control of GAW-PFR AOD measurements

NASA Astrophysics Data System (ADS)

Kazadzis, Stelios; Kouremeti, Natalia; Nyeki, Stephan; Gröbner, Julian; Wehrli, Christoph

2018-02-01

The World Optical Depth Research Calibration Center (WORCC) is a section within the World Radiation Center at Physikalisches-Meteorologisches Observatorium (PMOD/WRC), Davos, Switzerland, established after the recommendations of the World Meteorological Organization for calibration of aerosol optical depth (AOD)-related Sun photometers. WORCC is mandated to develop new methods for instrument calibration, to initiate homogenization activities among different AOD networks and to run a network (GAW-PFR) of Sun photometers. In this work we describe the calibration hierarchy and methods used under WORCC and the basic procedures, tests and processing techniques in order to ensure the quality assurance and quality control of the AOD-retrieved data.

Validation of a method for the determination of zolpidem in human plasma using LC with fluorescence detection.

PubMed

Ring, P R; Bostick, J M

2000-04-01

A sensitive and selective high-performance liquid chromatography (HPLC) method was developed for the determination of zolpidem in human plasma. Zolpidem and the internal standard (trazodone) were extracted from human plasma that had been made basic. The basic sample was loaded onto a conditioned Bond Elut C18 cartridge, rinsed with water and eluted with methanol. Forty microliters were then injected onto the LC system. Separation was achieved on a C18 column (150 x 4.6 mm, 5 microm) with a mobile phase composed of acetonitrile:50 mM potassium phosphate monobasic at pH 6.0 (4:6, v/v). Detection was by fluorescence, with excitation at 254 nm and emission at 400 nm. The retention times of zolpidem and internal standard were approximately 4.7 and 5.3 min, respectively. The LC run time was 8 min. The assay was linear in concentration range 1-400 ng/ml for zolpidem in human plasma. The analysis of quality control samples for zolpidem (3, 30, and 300 ng/ml) demonstrated excellent precision with relative standard deviations (RSD) of 3.7, 4.6, and 3.0%, respectively (n = 18). The method was accurate with all intraday (n = 6) and overall (n = 18) mean concentrations within 5.8% from nominal at all quality control sample concentrations. This method was also performed using a Gilson Aspec XL automated sample processor and autoinjector. The samples were manually fortified with internal standard and made basic. The aspec then performed the solid phase extraction and made injections of the samples onto the LC system. Using the automated procedure for analysis, quality control samples for zolpidem (3, 30, and 300 ng/ml) demonstrated acceptable precision with RSD values of 9.0, 4.9, and 5.1%, respectively (n = 12). The method was accurate with all intracurve (n = 4) and overall (n = 12) mean values being less than 10.8% from nominal at all quality control sample concentrations.

Pain Control Research in the Terminally Ill.

ERIC Educational Resources Information Center

Levy, Michael H.

1988-01-01

Two main goals in the care of the terminally ill are to optimize the quality of their remaining life and to alleviate the distress of their survivors. Pain control research has contributed significantly to meeting those goals, but continued progress is needed in both basic studies and expanded applications of new techniques. (Author/NB)

A systematic review of physical therapy interventions for patients with anorexia and bulemia nervosa.

PubMed

Vancampfort, Davy; Vanderlinden, Johan; De Hert, Marc; Soundy, Andrew; Adámkova, Milena; Skjaerven, Liv Helvik; Catalán-Matamoros, Daniel; Lundvik Gyllensten, Amanda; Gómez-Conesa, Antonia; Probst, Michel

2014-01-01

The purpose of this systematic review was to summarise the evidence from randomised controlled trials examining the effectiveness of physical therapy compared with care as usual or a wait-list condition on eating pathology and on physiological and psychological parameters in patients with anorexia and bulimia nervosa. EMBASE, PsycINFO, PubMed, Cumulative Index to Nursing and Allied Health Literature, Physiotherapy Evidence Database and The Cochrane Library were searched from their inception until February, 2013. Articles were eligible if they utilised a randomised controlled trial design, compared physical therapy with a placebo condition, control intervention, or standard care and included patients with anorexia and bulimia nervosa. The methodological quality was assessed with the Jadad scale. Eight randomised controlled trials involving 213 patients (age range: 16-36 years) met all selection criteria. Three of the 8 included studies were of strong methodological quality (Jadad score≥3). Major methodological weaknesses were attrition and selection bias. The main results demonstrate that aerobic and resistance training result in significantly increased muscle strength, body mass index and body fat percentage in anorexia patients. In addition, aerobic exercise, yoga, massage and basic body awareness therapy significantly lowered scores of eating pathology and depressive symptoms in both anorexia and bulimia nervosa patients. No adverse effects were reported. The paucity and heterogeneity of available studies limits overall conclusions and highlights the need for further research. Implications for Rehabilitation Supervised physical therapy might increase weight in anorexia nervosa patients. Aerobic exercise, massage, basic body awareness therapy and yoga might reduce eating pathology in patients with anorexia and bulimia nervosa. Aerobic exercise, yoga and basic body awareness therapy might improve mental and physical quality of life in patients with an eating disorder.

Multiple response optimization of the coagulation process for upgrading the quality of effluent from municipal wastewater treatment plant

NASA Astrophysics Data System (ADS)

Li, Na; Hu, Yi; Lu, Yong-Ze; Zeng, Raymond J.; Sheng, Guo-Ping

2016-05-01

To meet the high quality standard of receiving water, the coagulation process using polyferric chloride (PFC) was used to further improve the water quality of effluent from wastewater treatment plants. Uniform design (UD) coupled with response surface methodology (RSM) was adopted to assess the effects of the main influence factors: coagulant dosage, pH and basicity, on the removal of total organic carbon (TOC), NH4+-N and PO43--P. A desirability function approach was used to effectively optimize the coagulation process for the comprehensive removal of TOC, NH4+-N and PO43--P to upgrade the effluent quality in practical application. The optimized operating conditions were: dosage 28 mg/L, pH 8.5 and basicity 0.001. The corresponding removal efficiencies for TOC, NH4+-N and PO43--P were 77.2%, 94.6% and 20.8%, respectively. More importantly, the effluent quality could upgrade to surface water Class V of China through coagulation under optimal region. In addition, grey relational analysis (GRA) prioritized these three factors as: pH > basicity > dosage (for TOC), basicity > dosage > pH (for NH4+-N), pH > dosage > basicity (for PO43--P), which would help identify the most important factor to control the treatment efficiency of various effluent quality indexes by PFC coagulation.

A Look at Handling Qualities of Canard Configurations

NASA Technical Reports Server (NTRS)

Anderson, Seth B.

1986-01-01

The first human-powered flight was achieved by a canard-configured aircraft (Wright Brothers). Although other canard concepts were flown with varying degrees of success over the years, the tail-aft configuration has dominated the aircraft market for both military and civil use. Reviewed are the development of several canard aircraft with emphasis on stability and control, handling qualities, and operating problems. The results show that early canard concepts suffered adversely in flight behavior because of a lack of understanding of the sensitivities of these concepts to basic stability and control principles. Modern canard designs have been made competitive with tail-aft configurations by using appropriate handling qualities design criteria.

Shelf-life extension of Pacific white shrimp using algae extracts during refrigerated storage.

PubMed

Li, Yingchang; Yang, Zhongyan; Li, Jianrong

2017-01-01

Shrimp is a low-fat, high-protein aquatic product, and is susceptible to spoilage during storage. To establish an effective method for the quality control of Pacific white shrimp, the effects of polyphenols (PP) and polysaccharides (PS) from Porphyra yezoensis on the quality of Pacific white shrimp were assessed during refrigerated storage. Pacific white shrimp samples were treated with 5 g L -1 polyphenols, and 8 g L -1 polysaccharides, then stored at 4 ± 1 °C for 8 days. All samples were subjected to measurement of total viable count (TVC), pH, total volatile basic nitrogen (TVB-N), K-value, thiobarbituric acid (TBA), polyphenol oxidase (PPO) activity, and were also assessed by sensory evaluation. The results showed that PP, PS, and the mixture of polyphenols and polysaccharides (PP+PS) could inhibit the increase of total volatile basic nitrogen (TVB-N), thiobarbituric acid (TBA) and K-value, and reduce total viable count (TVC) compared with the control group. PP could also inhibit polyphenol oxidase (PPO) activity. Sensory evaluation proved the efficacy of PP and PS by maintaining the overall quality of Pacific white shrimp during refrigerated storage. Moreover, PP+PS could extend the shelf-life of shrimp by 3-4 days compared with the control group. PP+PS could more effectively maintain quality and extend shelf-life during refrigerated storage. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Learning climate and feedback as predictors of dental students' self-determined motivation: The mediating role of basic psychological needs satisfaction.

PubMed

Orsini, C; Binnie, V; Wilson, S; Villegas, M J

2018-05-01

The aim of this study was to test the mediating role of the satisfaction of dental students' basic psychological needs of autonomy, competence and relatedness on the association between learning climate, feedback and student motivation. The latter was based on the self-determination theory's concepts of differentiation of autonomous motivation, controlled motivation and amotivation. A cross-sectional correlational study was conducted where 924 students completed self-reported questionnaires measuring motivation, perception of the learning climate, feedback and basic psychological needs satisfaction. Descriptive statistics, Cronbach's alpha scores and bivariate correlations were computed. Mediation of basic needs on each predictor-outcome association was tested based on a series of regression analyses. Finally, all variables were integrated into one structural equation model, controlling for the effects of age, gender and year of study. Cronbach's alpha scores were acceptable (.655 to .905). Correlation analyses showed positive and significant associations between both an autonomy-supportive learning climate and the quantity and quality of feedback received, and students' autonomous motivation, which decreased and became negative when correlated with controlled motivation and amotivation, respectively. Regression analyses revealed that these associations were indirect and mediated by how these predictors satisfied students' basic psychological needs. These results were corroborated by the structural equation analysis, in which data fit the model well and regression paths were in the expected direction. An autonomy-supportive learning climate and the quantity and quality of feedback were positive predictors of students' autonomous motivation and negative predictors of amotivation. However, this was an indirect association mediated by the satisfaction of students' basic psychological needs. Consequently, supporting students' needs of autonomy, competence and relatedness might lead to optimal types of motivation, which has an important influence on dental education. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

[Application of THz technology to nondestructive detection of agricultural product quality].

PubMed

Jiang, Yu-ying; Ge, Hong-yi; Lian, Fei-yu; Zhang, Yuan; Xia, Shan-hong

2014-08-01

With recent development of THz sources and detector, applications of THz radiation to nondestructive testing and quality control have expanded in many fields, such as agriculture, safety inspection and quality control, medicine, biochemistry, communication etc. Compared with other detection technique, being a new kind of technique, THz radiation has low energy, good perspectivity, and high signal-to-noise ratio, and thus can obtain physical, chemical and biological information. This paper first introduces the basic concept of THz radiation and the major properties, then gives an extensive review of recent research progress in detection of the quality of agricultural products via THz technique, analyzes the existing shortcomings of THz detection and discusses the outlook of potential application, finally proposes the new application of THz technique to detection of quality of stored grain.

75 FR 6337 - Approval and Promulgation of Air Quality Implementation Plans; Maryland; Control of Carbon...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-09

... Oxygen Furnaces AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule. SUMMARY: EPA... basic oxygen furnaces (BOFs) at steel mills with a new CO standard for BOFs at steel mills. In the Final...

Flying qualities and control system characteristics for superaugmented aircraft

NASA Technical Reports Server (NTRS)

Myers, T. T.; Mcruer, D. T.; Johnston, D. E.

1984-01-01

Aircraft-alone dynamics and superaugmented control system fundamental regulatory properties including stability and regulatory responses of the basic closed-loop systems; fundamental high and low frequency margins and governing factors; and sensitivity to aircraft and controller parameters are addressed. Alternative FCS mechanizations, and mechanizational side effects are also discussed. An overview of flying qualities considerations encompasses general pilot operations as a controller in unattended, intermittent and trim, and full-attention regulatory or command control; effective vehicle primary and secondary response properties to pilot inputs and disturbances; pilot control architectural possibilities; and comparison of superaugmented and conventional aircraft path responses for different forms of pilot control. Results of a simple experimental investigation into pilot dynamic behavior in attitude control of superaugmented aircraft configurations with high frequency time laps and time delays are presented.

Analysis of the Parameters Required for Performance Monitoring and Assessment of Military Communications Systems by Military Technical Controller

DTIC Science & Technology

1975-12-01

139 APPENDIX A* BASIC CONCEPT OF MILITARY TECHNICAL CONTROL.142 6 APIENDIX Es TEST EQUIPMENI REQUIRED FOR lEASURF.4ENr OF 1AF’AMETE RS...Control ( SATEC ) Automatic Facilities heport Army Automated Quality Monitoring Reporting System (AQMPS) Army Autcmated Technical Control-Semi (ATC-Semi...technical control then beco.. es equipment status monitoring. All the major equipment in a system wculd have internal sensors with properly selected parameters

Practical quality control tools for curves and surfaces

NASA Technical Reports Server (NTRS)

Small, Scott G.

1992-01-01

Curves (geometry) and surfaces created by Computer Aided Geometric Design systems in the engineering environment must satisfy two basic quality criteria: the geometric shape must have the desired engineering properties; and the objects must be parameterized in a way which does not cause computational difficulty for geometric processing and engineering analysis. Interactive techniques are described which are in use at Boeing to evaluate the quality of aircraft geometry prior to Computational Fluid Dynamic analysis, including newly developed methods for examining surface parameterization and its effects.

Geotechnical approaches to coal ash content control in mining of complex structure deposits

NASA Astrophysics Data System (ADS)

Batugin, SA; Gavrilov, VL; Khoyutanov, EA

2017-02-01

Coal deposits having complex structure and nonuniform quality coal reserves require improved processes of production quality control. The paper proposes a method to present coal ash content as components of natural and technological dilution. It is chosen to carry out studies on the western site of Elginsk coal deposit, composed of four coal beds of complex structure. The reported estimates of coal ash content in the beds with respect to five components point at the need to account for such data in confirmation exploration, mine planning and actual mining. Basic means of analysis and control of overall ash content and its components are discussed.

A cost-constrained model of strategic service quality emphasis in nursing homes.

PubMed

Davis, M A; Provan, K G

1996-02-01

This study employed structural equation modeling to test the relationship between three aspects of the environmental context of nursing homes; Medicaid dependence, ownership status, and market demand, and two basic strategic orientations: low cost and differentiation based on service quality emphasis. Hypotheses were proposed and tested against data collected from a sample of nursing homes operating in a single state. Because of the overwhelming importance of cost control in the nursing home industry, a cost constrained strategy perspective was supported. Specifically, while the three contextual variables had no direct effect on service quality emphasis, the entire model was supported when cost control orientation was introduced as a mediating variable.

Apprentice Machine Theory Outline.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational-Technical Schools.

This volume contains outlines for 16 courses in machine theory that are designed for machine tool apprentices. Addressed in the individual course outlines are the following topics: basic concepts; lathes; milling machines; drills, saws, and shapers; heat treatment and metallurgy; grinders; quality control; hydraulics and pneumatics;…

[Application of adaptive canceling methods in temperature control in ultrasonic therapeutical treatment].

PubMed

Deng, Jun; Liu, Du-ren

2002-12-01

Objective. To improve the quality of ultrasonic therapeutical treatment by improving the accuracy of temperature control. Method. Adaptive canceling methods were used to reduce the noise of temperature signal gained, and enhance signal-to-noise ratio. Result. The test's result corresponds basically to the theoretical curve. Conclusion. Adaptive canceling methods can be applied to clinic treatment.

Evidence for the impact of quality improvement collaboratives: systematic review

PubMed Central

2008-01-01

Objective To evaluate the effectiveness of quality improvement collaboratives in improving the quality of care. Data sources Relevant studies through Medline, Embase, PsycINFO, CINAHL, and Cochrane databases. Study selection Two reviewers independently extracted data on topics, participants, setting, study design, and outcomes. Data synthesis Of 1104 articles identified, 72 were included in the study. Twelve reports representing nine studies (including two randomised controlled trials) used a controlled design to measure the effects of the quality improvement collaborative intervention on care processes or outcomes of care. Systematic review of these nine studies showed moderate positive results. Seven studies (including one randomised controlled trial) reported an effect on some of the selected outcome measures. Two studies (including one randomised controlled trial) did not show any significant effect. Conclusions The evidence underlying quality improvement collaboratives is positive but limited and the effects cannot be predicted with great certainty. Considering that quality improvement collaboratives seem to play a key part in current strategies focused on accelerating improvement, but may have only modest effects on outcomes at best, further knowledge of the basic components effectiveness, cost effectiveness, and success factors is crucial to determine the value of quality improvement collaboratives. PMID:18577559

Curriculum Reform: Quality in Basic Education. Background/Policy Paper. Improving the Quality of Basic Education. Volume I.

ERIC Educational Resources Information Center

Bacchus, Kazim; And Others

The theme of the 1990 meeting of the Ministers of Education of the Commonwealth of Nations was improving the quality of basic education. Basic education was defined as "the activities of primary and junior secondary schools, and of programmes of out-of-school education at an equivalent level, both for children and for adults." This…

[Colonoscopy quality control as a requirement of colorectal cancer screening].

PubMed

Quintero, Enrique; Alarcón-Fernández, Onofre; Jover, Rodrigo

2013-11-01

The strategies used in population-based colorectal screening strategies culminate in colonoscopy and consequently the success of these programs largely depends on the quality of this diagnostic test. The main factors to consider when evaluating quality are scientific-technical quality, safety, patient satisfaction, and accessibility. Quality indicators allow variability among hospitals, endoscopy units and endoscopists to be determined and can identify those not achieving recommended standards. In Spain, the working group for colonoscopy quality of the Spanish Society of Gastroenterology and the Spanish Society of Gastrointestinal Endoscopy have recently drawn up a Clinical Practice Guideline that contains the available evidence on the quality of screening colonoscopy, as well as the basic requirements that must be met by endoscopy units and endoscopists carrying out this procedure. The implementation of training programs and screening colonoscopy quality controls are strongly recommended to guarantee the success of population-based colorectal cancer screening. Copyright © 2013 Elsevier España, S.L. and AEEH y AEG. All rights reserved.

Odors and Air Pollution: A Bibliography with Abstracts.

ERIC Educational Resources Information Center

Environmental Protection Agency, Research Triangle Park, NC. Office of Air Programs.

The annotated bibliography presents a compilation of abstracts which deal with odors as they relate to air pollution. The abstracts are arranged within the following categories: Emission sources; Control methods; Measurement methods; Air quality measurements; Atmospheric interaction; Basic science and technology; Effects-human health;…

Cancer Research Training Award Fellowship Opportunity Announcement | DCCPS/NCI/NIH

Cancer.gov

Cancer control science is the conduct of basic and applied research in the behavioral, social, and population sciences to create or enhance interventions that, independently or in combination with biomedical approaches, reduce cancer risk, incidence, morbidity and mortality, and improve quality of life.

Clean the Air and Breathe Easier.

ERIC Educational Resources Information Center

Guevin, John

1997-01-01

Failure to prevent indoor air quality problems or act promptly can result in increased chances for long- or short-term health problems for staff and students, reduced productivity, faster plant deterioration, and strained school-community relations. Basic pollution control measures include source management, local exhausts, ventilation, exposure…

40 CFR 49.121 - Introduction.

Code of Federal Regulations, 2012 CFR

2012-07-01

... air pollution sources located within Indian reservations in Idaho, Oregon, and Washington that are appropriate in order to ensure a basic level of air pollution control and to protect public health and welfare... quality situations within Indian reservations, the known sources of air pollution, the needs and concerns...

40 CFR 49.121 - Introduction.

Code of Federal Regulations, 2014 CFR

2014-07-01

... air pollution sources located within Indian reservations in Idaho, Oregon, and Washington that are appropriate in order to ensure a basic level of air pollution control and to protect public health and welfare... quality situations within Indian reservations, the known sources of air pollution, the needs and concerns...

40 CFR 49.121 - Introduction.

Code of Federal Regulations, 2013 CFR

2013-07-01

... air pollution sources located within Indian reservations in Idaho, Oregon, and Washington that are appropriate in order to ensure a basic level of air pollution control and to protect public health and welfare... quality situations within Indian reservations, the known sources of air pollution, the needs and concerns...

40 CFR 49.121 - Introduction.

Code of Federal Regulations, 2011 CFR

2011-07-01

... air pollution sources located within Indian reservations in Idaho, Oregon, and Washington that are appropriate in order to ensure a basic level of air pollution control and to protect public health and welfare... quality situations within Indian reservations, the known sources of air pollution, the needs and concerns...

The good laboratory practice and good clinical practice requirements for the production of radiopharmaceuticals in clinical research.

PubMed

De Vos, Filip J; De Decker, Mario; Dierckx, Rudi A

2005-07-01

Radiopharmaceuticals account for more than 95% of the group of sterile pharmaceutical products and should therefore be handled and produced with care. Since the introduction of the European directive, all pharmaceuticals used in clinical studies must be prepared under good manufacturing practice (GMP) conditions. This review aims to give an overview of the basic principles and guidelines for the preparation of radiopharmaceuticals. Special attention is given to the production area environment and personnel, the two basic requirements for GMP productions. Especially for the production area, two philosophies have to be combined: the cascade system of over-pressure for the production of pharmaceuticals and the under pressure system for the manufacturing of radioisotopes. Personnel should be selected based on education and regularly given special training for the handling of radioactive material. Compared to pharmaceuticals, radiopharmaceuticals have their own labels, taking into account their specific nature. Besides the standard quality control, other items for quality control of radiopharmaceuticals are also discussed in this article.

Dietary Supplementation with Pioglitazone Hydrochloride and Chromium Methionine Improves Growth Performance, Meat Quality, and Antioxidant Ability in Finishing Pigs.

PubMed

Jin, Cheng-Long; Wang, Qiang; Zhang, Zong-Ming; Xu, Yin-Long; Yan, Hui-Chao; Li, Hai-Chang; Gao, Chun-Qi; Wang, Xiu-Qi

2018-05-02

This work was designed to investigate the synergistic effects of pioglitazone hydrochloride (PGZ) and chromium methionine (CrMet) on meat quality, muscle fatty acid profile, and antioxidant ability of pigs. Pigs in four groups were fed a basic diet or basic diet supplemented with 15 mg/kg of PGZ, 200 μg/kg of CrMet, or 15 mg/kg of PGZ + 200 μg/kg of CrMet. In comparison to the control group, the average daily feed intake, feed/gain ratio, and serum high-density lipoprotein level decreased in the PGZ + CrMet group. Dietary PGZ + CrMet supplementation increased carcass dressing percentage, intramuscular fat, and marbling score. The percentages of C18:1ω-9c, C18:2ω-6c, C18:3ω-3, and polyunsaturated fatty acid (PUFA) in the longissimus thoracis muscle were increased in the PGZ + CrMet group. Greater superoxide dismutase and glutathione peroxidase activities were observed in the PGZ + CrMet group compared to the control group. Collectively, these findings suggested that feed with PGZ and CrMet improved the growth performance and meat quality, especially for PUFA proportions and antioxidant ability.

Controlled by Love: The Harmful Relational Consequences of Perceived Conditional Positive Regard.

PubMed

Kanat-Maymon, Yaniv; Roth, Guy; Assor, Avi; Raizer, Abira

2016-08-01

Research on conditional positive regard (CPR) has shown that this seemingly benign practice has maladaptive correlates when used by parents. However, there is no research on the correlates of this practice in romantic relationships or on the processes mediating its effects. Building on self-determination theory (Deci & Ryan, ), three studies tested the hypothesis that perceived CPR impairs relationship quality, partly because it undermines the fulfillment of the basic psychological needs for autonomy and relatedness. Study 1 (N = 125) examined perceived CPR and relationship quality across four relationship targets: mother, father, romantic partner, and best friend. Study 2, involving romantic partners (N = 142), examined whether needs fulfillment mediated the association between perceived CPR and relationship quality. Study 3, involving romantic dyads (N = 85), also included partner reports on CPR. Across the three studies, CPR was linked with poor relationship quality between relationships, between people, and between dyadic partners. Moreover, results of Study 2 and Study 3 revealed that the inverse association between perceived CPR and relationship quality was mediated by dissatisfaction of autonomy but not relatedness. Despite its seemingly benign nature, CPR is detrimental to relationship quality, partly because it thwarts the basic need for autonomy. © 2015 Wiley Periodicals, Inc.

Revisiting sample size: are big trials the answer?

PubMed

Lurati Buse, Giovanna A L; Botto, Fernando; Devereaux, P J

2012-07-18

The superiority of the evidence generated in randomized controlled trials over observational data is not only conditional to randomization. Randomized controlled trials require proper design and implementation to provide a reliable effect estimate. Adequate random sequence generation, allocation implementation, analyses based on the intention-to-treat principle, and sufficient power are crucial to the quality of a randomized controlled trial. Power, or the probability of the trial to detect a difference when a real difference between treatments exists, strongly depends on sample size. The quality of orthopaedic randomized controlled trials is frequently threatened by a limited sample size. This paper reviews basic concepts and pitfalls in sample-size estimation and focuses on the importance of large trials in the generation of valid evidence.

[Quality assurance in interventional cardiology].

PubMed

Gülker, H

2009-10-01

Quality assurance in clinical studies aiming at approval of pharmaceutical products is submitted to strict rules, controls and auditing regulations. Comparative instruments to ensure quality in diagnostic and therapeutic procedures are not available in interventional cardiology, likewise in other fields of cardiovascular medicine. Quality assurance simply consists of "quality registers" with basic data not externally controlled. Based on the experiences of clinical studies and their long history of standardization it is assumed that these data may be severely flawed thus being inappropriate to set standards for diagnostic and therapeutic strategies. The precondition for quality assurance are quality data. In invasive coronary angiography and intervention medical indications, the decision making process interventional versus surgical revascularization, technical performance and after - care are essential aspects affecting quality of diagnostics and therapy. Quality data are externally controlled data. To collect quality data an appropriate infrastructure is a necessary precondition which is not existent. For an appropriate infrastructure investments have to be done both to build up as well as to sustain the necessary preconditions. As long as there are no infrastructure and no investments there will be no "quality data". There exist simply registers of data which are not proved to be a basis for significant assurance and enhancement in quality in interventional coronary cardiology. Georg Thieme Verlag KG Stuttgart, New York.

Writing standard operating procedures (SOPs) for cryostorage protocols: using shoot meristem cryopreservation as an example.

PubMed

Harding, Keith; Benson, Erica E

2015-01-01

Standard operating procedures are a systematic way of making sure that biopreservation processes, tasks, protocols, and operations are correctly and consistently performed. They are the basic documents of biorepository quality management systems and are used in quality assurance, control, and improvement. Methodologies for constructing workflows and writing standard operating procedures and work instructions are described using a plant cryopreservation protocol as an example. This chapter is pertinent to other biopreservation sectors because how methods are written, interpreted, and implemented can affect the quality of storage outcomes.

Management approach recommendations. Earth Observatory Satellite system definition study (EOS)

NASA Technical Reports Server (NTRS)

1974-01-01

Management analyses and tradeoffs were performed to determine the most cost effective management approach for the Earth Observatory Satellite (EOS) Phase C/D. The basic objectives of the management approach are identified. Some of the subjects considered are as follows: (1) contract startup phase, (2) project management control system, (3) configuration management, (4) quality control and reliability engineering requirements, and (5) the parts procurement program.

Quality control algorithms for rainfall measurements

NASA Astrophysics Data System (ADS)

Golz, Claudia; Einfalt, Thomas; Gabella, Marco; Germann, Urs

2005-09-01

One of the basic requirements for a scientific use of rain data from raingauges, ground and space radars is data quality control. Rain data could be used more intensively in many fields of activity (meteorology, hydrology, etc.), if the achievable data quality could be improved. This depends on the available data quality delivered by the measuring devices and the data quality enhancement procedures. To get an overview of the existing algorithms a literature review and literature pool have been produced. The diverse algorithms have been evaluated to meet VOLTAIRE objectives and sorted in different groups. To test the chosen algorithms an algorithm pool has been established, where the software is collected. A large part of this work presented here is implemented in the scope of the EU-project VOLTAIRE ( Validati on of mu ltisensors precipit ation fields and numerical modeling in Mediter ran ean test sites).

Improving and monitoring air quality.

PubMed

DuPont, André

2018-05-01

Since the authorization of the Clean Air Act Amendments of 1990, the air quality in the USA has significantly improved because of strong public support. The lessons learned over the last 25 years are being shared with the policy analysts, technical professionals, and scientist who endeavor to improve air quality in their communities. This paper will review how the USA has achieved the "high" standard of air quality that was envisioned in the early 1990s. This document will describe SO 2 gas emission reduction technology and highlight operation of emission monitoring technology. This paper describes the basic process operation of an air pollution control scrubber. A technical review of measures required to operate and maintain a large-scale pollution control system will be described. Also, the author explains how quality assurance procedures in performance of continuous emission monitoring plays a significant role in reducing air pollution.

[Effects of Self-directed Feedback Practice using Smartphone Videos on Basic Nursing Skills, Confidence in Performance and Learning Satisfaction].

PubMed

Lee, Seul Gi; Shin, Yun Hee

2016-04-01

This study was done to verify effects of a self-directed feedback practice using smartphone videos on nursing students' basic nursing skills, confidence in performance and learning satisfaction. In this study an experimental study with a post-test only control group design was used. Twenty-nine students were assigned to the experimental group and 29 to the control group. Experimental treatment was exchanging feedback on deficiencies through smartphone recorded videos of nursing practice process taken by peers during self-directed practice. Basic nursing skills scores were higher for all items in the experimental group compared to the control group, and differences were statistically significant ["Measuring vital signs" (t=-2.10, p=.039); "Wearing protective equipment when entering and exiting the quarantine room and the management of waste materials" (t=-4.74, p<.001) "Gavage tube feeding" (t=-2.70, p=.009)]. Confidence in performance was higher in the experimental group compared to the control group, but the differences were not statistically significant. However, after the complete practice, there was a statistically significant difference in overall performance confidence (t=-3.07. p=.003). Learning satisfaction was higher in the experimental group compared to the control group, but the difference was not statistically significant (t=-1.67, p=.100). Results of this study indicate that self-directed feedback practice using smartphone videos can improve basic nursing skills. The significance is that it can help nursing students gain confidence in their nursing skills for the future through improvement of basic nursing skills and performance of quality care, thus providing patients with safer care.

Basic Relationships among Scale, Quality, and Benefits in Sino-Foreign Cooperative Education

ERIC Educational Resources Information Center

Lin, Jinhui

2016-01-01

The basic relationships among scale, quality, and benefits in Sino-foreign cooperative education are key to the development of cooperative education. It is necessary to construct a theoretical framework for the basic relationships among scale, quality, and benefits in Sino-foreign cooperative education and analyze the questions faced in…

Air Pollution Translations: A Bibliography with Abstracts - Volume 4.

ERIC Educational Resources Information Center

Environmental Protection Agency, Research Triangle Park, NC. Air Pollution Technical Information Center.

This volume is the fourth in a series of compilations presenting abstracts and indexes of translations of technical air pollution literature. The entries are grouped into 12 subject categories: Emission Sources, Control Methods, Measurement Methods, Air Quality Measurements, Atmospheric Interaction, Basic Science and Technology, Effects--Human…

Postindustrialization and Environmental Quality: An Empirical Analysis of the Environmental State

ERIC Educational Resources Information Center

Fisher, Dana R.; Freudenburg, William R.

2004-01-01

Existing sociological analyses express differing expectations about state control over economic actors and the political feasibility of environmental regulation. Recent literature on the environmental state sees environmental protection as becoming a basic responsibility of postindustrial states, with economic actors no longer having the autonomy…

Qualitative Advances of China's Basic Education since Reform and Opening up: A Brief Overview

ERIC Educational Resources Information Center

Tao, Xin; Chunhua, Kang

2012-01-01

Basic education is universal education, which aims to improve the basic quality of a nation's people. In the three decades since reform and opening up, earth-shaking changes have taken place in the quality of China's basic education. This article describes the path of development and changes in China's basic education over the past thirty years…

A hard day's night: a longitudinal study on the relationships among job demands and job control, sleep quality and fatigue.

PubMed

de Lange, Annet H; Kompier, Michiel A J; Taris, Toon W; Geurts, Sabine A E; Beckers, Debby G J; Houtman, Irene L D; Bongers, Paulien M

2009-09-01

This prospective four-wave study examined (i) the causal direction of the longitudinal relations among job demands, job control, sleep quality and fatigue; and (ii) the effects of stability and change in demand-control history on the development of sleep quality and fatigue. Based on results of a four-wave complete panel study among 1163 Dutch employees, we found significant effects of job demands and job control on sleep quality and fatigue across a 1-year time lag, supporting the strain hypothesis (Demand-Control model; Karasek and Theorell, Basic Books, New York, 1990). No reversed or reciprocal causal patterns were detected. Furthermore, our results revealed that cumulative exposure to a high-strain work environment (characterized by high job demands and low job control) was associated with elevated levels of sleep-related complaints. Cumulative exposure to a low-strain work environment (i.e. low job demands and high job control) was associated with the highest sleep quality and lowest level of fatigue. Our results revealed further that changes in exposure history were related to changes in reported sleep quality and fatigue across time. As expected, a transition from a non-high-strain towards a high-strain job was associated with a significant increase in sleep-related complaints; conversely, a transition towards a non-high-strain job was not related to an improvement in sleep-related problems.

Depression partially mediated the relationship between basic psychological needs and quality of life among people living with HIV.

PubMed

Majeed, Zahraa; van Wijngaarden, Edwin; Dolan, James G; Shah, Krupa N

2017-11-01

Few studies have examined the relationship between basic psychological needs (BPN), depression and quality of life (QOL) in people living with HIV (PLWH). This cross-sectional study (N = 65; 37% females, 37% Caucasian, mean age = 55 ± 6 years, mean CD4 count = 668 ± 368 cells/mm 3 , average duration of HIV = 18 ± 4 years) found that BPN frustration was related with lower QOL. The strength of this relationship was reduced after controlling for depression. This suggests that depression partially mediated the relationship between BPN and QOL. BPN and depression may be specific targets for psychosocial interventions aimed at improving QOL in PLWH to promote successful aging.

V/STOL Dynamics, Control, and Flying Qualities

NASA Technical Reports Server (NTRS)

Franklin, James A.

2000-01-01

This publication presents material that constituted the lectures presented by the author as part of Course AA 234, Dynamics, Control, and Flying Qualities of Vertical/Short Takeoff and Landing (V/STOL) Aircraft that was taught in the Department of Aeronautics and Astronautics at Stanford University. It covers representative operations of vertical and short takeoff and landing (V/STOL) aircraft, a discussion of the pilot's strategy in controlling these aircraft, the equations of motion pertinent to V/STOL tasks, and their application in the analysis of longitudinal and lateral-directional control in hover and forward flight. Following that development, which applies to the characteristics of the basic airframe and propulsion system, the text concludes with a discussion of the contributions of control augmentation in specific flight tasks and of the integration of modern electronic displays with these controls.

Effects of chitosan combined with nisin treatment on storage quality of large yellow croaker (Pseudosciaena crocea).

PubMed

Hui, Guohua; Liu, Wei; Feng, Hailin; Li, Jian; Gao, Yuanyuan

2016-07-15

Effects of chitosan combined with different concentrations of nisin on quality enhancement of large yellow croaker (Pseudosciaena crocea) stored at 4 °C were evaluated for 8 days. Changes in sensory score and volatile spoilage products, total viable counts (TVC), and physiochemical indexes including weight loss, colour, pH, total volatile basic nitrogen (TVB-N), and K-value were examined. Results demonstrated that nisin-treated samples presented better quality preservation effects than chitosan alone. 1% chitosan combined with 0.6% nisin presented optimal quality enhancement effects, such as moisture loss control, volatile spoilage inhibition, TVB-N reduction, TVC growth control, and colour and sensory acceptability maintenance. Therefore, chitosan combined with nisin is promising in large yellow croaker shelf life extension. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development and flight evaluation of an augmented stability active controls concept with a small horizontal tail

NASA Technical Reports Server (NTRS)

Rising, J. J.; Kairys, A. A.; Maass, C. A.; Siegart, C. D.; Rakness, W. L.; Mijares, R. D.; King, R. W.; Peterson, R. S.; Hurley, S. R.; Wickson, D.

1982-01-01

A limited authority pitch active control system (PACS) was developed for a wide body jet transport (L-1011) with a flying horizontal stabilizer. Two dual channel digital computers and the associated software provide command signals to a dual channel series servo which controls the stabilizer power actuators. Input sensor signals to the computer are pitch rate, column-trim position, and dynamic pressure. Control laws are given for the PACS and the system architecture is defined. The piloted flight simulation and vehicle system simulation tests performed to verify control laws and system operation prior to installation on the aircraft are discussed. Modifications to the basic aircraft are described. Flying qualities of the aircraft with the PACS on and off were evaluated. Handling qualities for cruise and high speed flight conditions with the c.g. at 39% mac ( + 1% stability margin) and PACS operating were judged to be as good as the handling qualities with the c.g. at 25% (+15% stability margin) and PACS off.

Quality Control and Nondestructive Evaluation Techniques for Composites. Part 2. Physiochemical Characterization Techniques - A State-of-the Art Review

DTIC Science & Technology

1983-05-01

in the presence of fillers or without it. The basic assumption made is that the heat of reaction is proportional to the extent of the reaction...disperse the SillllV* rVdi\\tion ^^9 • .canning machan ^m. ill isolate the frequency range falling on the detector In this manner. the spectrum...the molar orms with only has n absorb ing (nxp) and # by the udied. Of t have a all of the analysis a complete the same There are two basic

Contact angle determination procedure and detection of an invisible surface film

NASA Technical Reports Server (NTRS)

Meyer, G.; Grat, R.

1990-01-01

The contact angle value, i.e., the tangent angle of liquid resting on a planar solid surface, is a basic parameter which can be applied to a wide range of applications. The goal is to provide a basic understanding of the contact angle measurement technique and to present a simple illustration that can be applied as a quality control method; namely, detection of a surface contaminant which exists on a surface that appears clean to the unaided eye. The equipment and experimental procedures are detailed.

[Compatibility of different quality control systems].

PubMed

Invernizzi, Enrico

2002-01-01

Management of the good laboratory practice (GLP) quality system presupposes its linking to a basic recognized and approved quality system, from which it can draw on management procedures common to all quality systems, such as the ISO 9000 set of norms. A quality system organized in this way can also be integrated with other dedicated quality systems, or parts of them, to obtain principles or management procedures for specific topics. The aim of this organization is to set up a reliable, recognized quality system compatible with the principles of GLP and other quality management systems, which provides users with a simplified set of easily accessible management tools and answers. The organization of this quality system is set out in the quality assurance programme, which is actually the document in which the test facility incorporates the GLP principles into its own quality organization.

Improving integrity of on-line grammage measurement with traceable basic calibration.

PubMed

Kangasrääsiö, Juha

2010-07-01

The automatic control of grammage (basis weight) in paper and board production is based upon on-line grammage measurement. Furthermore, the automatic control of other quality variables such as moisture, ash content and coat weight, may rely on the grammage measurement. The integrity of Kr-85 based on-line grammage measurement systems was studied, by performing basic calibrations with traceably calibrated plastic reference standards. The calibrations were performed according to the EN ISO/IEC 17025 standard, which is a requirement for calibration laboratories. The observed relative measurement errors were 3.3% in the first time calibrations at the 95% confidence level. With the traceable basic calibration method, however, these errors can be reduced to under 0.5%, thus improving the integrity of on-line grammage measurements. Also a standardised algorithm, based on the experience from the performed calibrations, is proposed to ease the adjustment of the different grammage measurement systems. The calibration technique can basically be applied to all beta-radiation based grammage measurements. 2010 ISA. Published by Elsevier Ltd. All rights reserved.

Basic Body Awareness Therapy in patients suffering from fibromyalgia: A randomized clinical trial.

PubMed

Bravo, Cristina; Skjaerven, Liv Helvik; Espart, Anna; Guitard Sein-Echaluce, Luisa; Catalan-Matamoros, Daniel

2018-05-03

The aim of this study is to assess whether Basic Body Awareness Therapy (BBAT) improves musculoskeletal pain, movement quality, psychological function, and quality of life. The effects of BBAT in addition to treatment as usual (TAU) were studied in a randomized controlled trial. Forty-one patients were randomly assigned to a control group (n = 21) and an intervention group (n = 20). Both groups received TAU including pharmacological therapy. The intervention group took part in 10 BBAT sessions. Outcome variables were measured regarding pain, movement quality, psychological function, and quality of life. Outcome measures were assessed before intervention, in posttest, and in follow-ups at 12 and 24 weeks. The BBAT group showed significant improvement in 'pain' at posttest (p = 0.037) and in 'movement quality' from baseline to 24 weeks (p = 0.000). Intragroup analysis showed significant improvements in the SF-36 body pain subscale at 12 and 24 weeks (p = 0.001, p = 0.014), Hospital Anxiety Depression scale in anxiety subscale at 12 weeks (p = 0.019), State-Trait Anxiety Inventory anxiety questionnaire at 12 and 24 weeks (p = 0.012, p = 0.002), and STAI state at 12 and 24 weeks (p = 0.042, p = 0.004). This study showed that BBAT might be an effective intervention in patients suffering from fibromyalgia in relation to pain, movement quality, and anxiety.

Drivers of Successful Bond and Operating Levies...Q4C at the Foundation.

ERIC Educational Resources Information Center

Lifto, Don E. Morris; Morris, William D.

2000-01-01

Improving a school's Q4C quotient (quality control, customer commitment, and communications) during election planning hinges on district mission, a culture of high expectations, basic skills mastery, commitment to customers, continuous feedback, healthy working relationships, broad community involvement, high- level strategic planning and…

Management Information Systems for Higher Education. Studies in Institutional Management in Higher Education.

ERIC Educational Resources Information Center

Hussain, K. M., Ed.

Contents include an introduction to information systems (basic concepts and life-cycle); development of an information system (design, implementation, testing, and conversion); operation (evaluation and maintenance, quality control, and economics); and case studies of such systems at the New University of Lisbon, Bath University, Laval University…

Environment and the Law. Legal Almanac Series.

ERIC Educational Resources Information Center

Sloan, Irving J.

This survey is designed to provide the general reader with some basic background on the legal aspects of the effort to achieve environmental quality. The first chapter discusses the structure of federal environmental control in terms of newly established agencies and recently enacted legislation. Other chapters deal individually with air, water,…

Desktop Publishing: A Brave New World and Publishing from the Desktop.

ERIC Educational Resources Information Center

Lormand, Robert; Rowe, Jane J.

1988-01-01

The first of two articles presents basic selection criteria for desktop publishing software packages, including discussion of expectations, required equipment, training costs, publication size, desired software features, additional equipment needed, and quality control. The second provides a brief description of desktop publishing using the Apple…

Life tables as tools of evaluation and quality control for arthropod mass production

USDA-ARS?s Scientific Manuscript database

Life tables, as a basic concept, are descriptions of survival potential at various ages or stages. Understanding critical life stages of arthropod development and their influence on the population structure is of great importance for arthropod rearing systems. Another important advantage of a life t...

Water Quality Field Guide.

ERIC Educational Resources Information Center

Soil Conservation Service (USDA), Washington, DC.

Nonpoint source pollution is both a relatively recent concern and a complex phenomenon with many unknowns. Knowing the extent to which agricultural sources contribute to the total pollutant load, the extent to which various control practices decrease this load, and the effect of reducing the pollutants delivered to a water body are basic to the…

40 CFR 49.121 - Introduction.

Code of Federal Regulations, 2010 CFR

2010-07-01

... in order to ensure a basic level of air pollution control and to protect public health and welfare... quality situations within Indian reservations, the known sources of air pollution, the needs and concerns... Reservations in EPA Region 10” apply to air pollution sources on a particular Indian reservation when EPA has...

Development and Application of the Key Technologies for the Quality Control and Inspection of National Geographical Conditions Survey Products

NASA Astrophysics Data System (ADS)

Zhao, Y.; Zhang, L.; Ma, W.; Zhang, P.; Zhao, T.

2018-04-01

The First National Geographical Condition Survey is a predecessor task to dynamically master basic situations of the nature, ecology and human activities on the earth's surface and it is the brand-new mapping geographic information engineering. In order to ensure comprehensive, real and accurate survey results and achieve the quality management target which the qualified rate is 100 % and the yield is more than 80 %, it is necessary to carry out the quality control and result inspection for national geographical conditions survey on a national scale. To ensure that achievement quality meets quality target requirements, this paper develops the key technology method of "five-in-one" quality control that is constituted by "quality control system of national geographical condition survey, quality inspection technology system, quality evaluation system, quality inspection information management system and national linked quality control institutions" by aiming at large scale, wide coverage range, more undertaking units, more management levels, technical updating, more production process and obvious regional differences in the national geographical condition survey and combining with novel achievement manifestation, complicated dependency, more special reference data, and large data size. This project fully considering the domestic and foreign related research results and production practice experience, combined with the technology development and the needs of the production, it stipulates the inspection methods and technical requirements of each stage in the quality inspection of the geographical condition survey results, and extends the traditional inspection and acceptance technology, and solves the key technologies that are badly needed in the first national geographic survey.

A Telerehabilitation Approach to Enhance Quality of Life Through Exercise Among Adults With Paraplegia: Study Protocol.

PubMed

Sweet, Shane Norman; Rocchi, Meredith; Arbour-Nicitopoulos, Kelly; Kairy, Dahlia; Fillion, Brigitte

2017-10-19

Despite compelling evidence linking physical activity and quality of life among adults with spinal cord injury (SCI), exercise participation rates are extremely low in this population. Unfortunately, a lack of behavioral exercise interventions, in particular theory-based randomized controlled trials (RCT), exists within the SCI literature. A pilot RCT is needed to first examine the feasibility to conduct such interventions and determine the appropriate effect size to inform future full-scale interventions. The overall goal of this pilot RCT is to test an 8-week innovative, video-based telerehabilitation intervention based on self-determination theory and aimed at enhancing the basic psychological needs, motivation, exercise participation, and quality of life‒related outcomes of adults with paraplegia. The objectives are to (1) determine if individuals in the intervention group have greater increases in their basic psychological needs and autonomous motivation and a decrease in controlled motivation compared to the control group, (2) determine whether the intervention group reports greater increases in exercise participation and quality of life‒related variables (eg, life satisfaction, participation in daily/social activities, depressive symptoms) compared to the control group, and (3) examine if adults with paraplegia who received the intervention report improved scores on psychosocial predictors of exercise (eg, action planning) and well-being (eg, positive affect) compared to the control group. We also aimed to examine the implementation characteristics of the intervention (eg, satisfaction with the technology, counselor's ability to foster the psychological needs). Adults with paraplegia (N=24) living in the community will be recruited. All participants will be invited to complete assessments of their psychological needs, motivation, exercise, and quality of life‒related variables at three time points (baseline, 6, and 10 weeks). Following the baseline assessment, participants will be randomly assigned to the intervention or control group. Participants in the intervention group will participate in 8 weekly, 1-hour video-based telerehabilitation sessions with a trained physical activity counselor, while participants in the control group will be asked to continue with their regular routine. We expect higher ratings of the basic psychological needs and autonomous motivation and lower scores for controlled motivation for the intervention group compared to the control group (Objective 1). We also expect that our video-based intervention will have moderate effects on exercise participation, as well as small-to-moderate positive effects on the quality of life‒related variables (Objective 2). Finally, we expect the intervention to have a small positive effect on psychosocial predictors of physical activity and well-being (Objective 3). We anticipate that the results will show that the intervention is appropriate for adults with paraplegia and feasible to test in a full-scale RCT. ClinicalTrials.gov NCT02833935; https://clinicaltrials.gov/ct2/show/NCT02833935 (Archived by WebCite at http://www.webcitation.org/6u8U9x2yt). ©Shane Norman Sweet, Meredith Rocchi, Kelly Arbour-Nicitopoulos, Dahlia Kairy, Brigitte Fillion. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 19.10.2017.

Federal Research and Development Funding: FY2017

DTIC Science & Technology

2016-06-24

facilities and equipment; does not include physical assets for R&D such as R&D equipment and facilities or routine product testing, quality control...multiagency R&D initiative to advance understanding and control of matter at the nanoscale, where the physical , chemical, and biological properties of...nuclear programs that dated back to the Manhattan Project. Today, DOE conducts basic scientific research in areas ranging from nuclear physics to the

Advances in clinical NK cell studies: Donor selection, manufacturing and quality control

PubMed Central

Koehl, U.; Kalberer, C.; Spanholtz, J.; Lee, D. A.; Miller, J. S.; Cooley, S.; Lowdell, M.; Uharek, L.; Klingemann, H.; Curti, A.; Leung, W.; Alici, E.

2016-01-01

ABSTRACT Natural killer (NK) cells are increasingly used in clinical studies in order to treat patients with various malignancies. The following review summarizes platform lectures and 2013–2015 consortium meetings on manufacturing and clinical use of NK cells in Europe and United States. A broad overview of recent pre-clinical and clinical results in NK cell therapies is provided based on unstimulated, cytokine-activated, as well as genetically engineered NK cells using chimeric antigen receptors (CAR). Differences in donor selection, manufacturing and quality control of NK cells for cancer immunotherapies are described and basic recommendations are outlined for harmonization in future NK cell studies. PMID:27141397

Helicopter roll control effectiveness criteria program summary

NASA Technical Reports Server (NTRS)

Heffley, Robert K.; Bourne, Simon M.; Mnich, Marc A.

1988-01-01

A study of helicopter roll control effectiveness is summarized for the purpose of defining military helicopter handling qualities requirements. The study is based on an analysis of pilot-in-the-loop task performance of several basic maneuvers. This is extended by a series of piloted simulations using the NASA Ames Vertical Motion Simulator and selected flight data. The main results cover roll control power and short-term response characteristics. In general the handling qualities requirements recommended are set in conjunction with desired levels of flight task and maneuver response which can be directly observed in actual flight. An important aspect of this, however, is that vehicle handling qualities need to be set with regard to some quantitative aspect of mission performance. Specific examples of how this can be accomplished include a lateral unmask/remask maneuver in the presence of a threat and an air tracking maneuver which recognizes the kill probability enhancement connected with decreasing the range to the target. Conclusions and recommendations address not only the handling qualities recommendations, but also the general use of flight simulators and the dependence of mission performance on handling qualities.

Data Quality Assurance and Control for AmeriFlux Network at CDIAC, ORNL

NASA Astrophysics Data System (ADS)

Shem, W.; Boden, T.; Krassovski, M.; Yang, B.

2014-12-01

The Carbon Dioxide Information Analysis Center (CDIAC) at the Oak Ridge National Laboratory (ORNL) serves as the long-term data repository for the AmeriFlux network. Datasets currently available include hourly or half-hourly meteorological and flux observations, biological measurement records, and synthesis data products. Currently there is a lack of standardized nomenclature and specifically designed procedures for data quality assurance/control in processing and handling micrometeorological and ecological data at individual flux sites. CDIAC's has bridged this gap by providing efficient and accurate procedures for data quality control and standardization of the results for easier assimilation by the models used in climate science. In this presentation we highlight the procedures we have put in place to scrutinize continuous flux and meteorological data within Ameriflux network. We itemize some basic data quality issues that we have observed over the past years and include some examples of typical data quality issues. Such issues, e.g., incorrect time-stamping, poor calibration or maintenance of instruments, missing or incomplete metadata and others that are commonly over-looked by PI's, invariably impact the time-series observations.

New approach for quality control in manufacturing process

NASA Astrophysics Data System (ADS)

Hanzah, Muhammad Radhi bin; Rahim, Wan Mohd Faizal Wan Abd; Khor, C. Y.; Ishak, Muhammad Ikman; Rosli, M. U.; Jamalludin, Mohd Riduan; Zakaria, M. S.; Nawi, M. A. M.

2017-09-01

This study was regulated exclusively in view of theoretical aspect and further research should be done to demonstrate it in the genuine circumstance. The structure of this investigation including two industrial visits, i.e. interviews and meeting with approved staff from each organization agents. This review is cut up into two sections. Aside from the perception, little gatherings with the staffs from both organizations are held. With the subtle elements, the review is begun up. The aim of the study is characterized as to enhance the assessment strategy at quality control station to minimize defect outflow to the following client. This is to investigate the underlying factor in ebb and flow quality control framework so that another strategy to enhance quality control framework can implemented. Quality is a basic characteristic to be instated so that the end goal to fulfill clients' need is achieved. After a long hypothetical review is made, the best answer for be actualized at QG station to beat defects outflow to the following customer is by photoelectric sensor. It is reasonable, simple to keep up and has a high affectability to identify the defective items at the QG station.

Sampling the food processing environment: taking up the cudgel for preventive quality management in food processing environments.

PubMed

Wagner, Martin; Stessl, Beatrix

2014-01-01

The Listeria monitoring program for Austrian cheese factories was established in 1988. The basic idea is to control the introduction of L. monocytogenes into the food processing environment, preventing the pathogen from contaminating the food under processing. The Austrian Listeria monitoring program comprises four levels of investigation, dealing with routine monitoring of samples and consequences of finding a positive sample. Preventive quality control concepts attempt to detect a foodborne hazard along the food processing chain, prior to food delivery, retailing, and consumption. The implementation of a preventive food safety concept provokes a deepened insight by the manufacturers into problems concerning food safety. The development of preventive quality assurance strategies contributes to the national food safety status and protects public health.

Understanding biomaterial-tissue interface quality: combined in vitro evaluation

NASA Astrophysics Data System (ADS)

Gasik, Michael

2017-12-01

One of the greatest challenges in the development of new medical products and devices remains in providing maximal patient safety, efficacy and suitability for the purpose. A 'good quality' of the tissue-implant interface is one of the most critical factors for the success of the implant integration. In this paper this challenge is being discussed from the point of view of basic stimuli combination to experimental testing. The focus is in particular on bacterial effects on tissue-implant interaction (for different materials). The demonstration of the experimental evaluation of the tissue-implant interface is for dental abutment with mucosal contact. This shows that testing of the interface quality could be the most relevant in controlled conditions, which mimic as possible the clinical applications, but consider variables being under the control of the evaluator.

Statistics for nuclear engineers and scientists. Part 1. Basic statistical inference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beggs, W.J.

1981-02-01

This report is intended for the use of engineers and scientists working in the nuclear industry, especially at the Bettis Atomic Power Laboratory. It serves as the basis for several Bettis in-house statistics courses. The objectives of the report are to introduce the reader to the language and concepts of statistics and to provide a basic set of techniques to apply to problems of the collection and analysis of data. Part 1 covers subjects of basic inference. The subjects include: descriptive statistics; probability; simple inference for normally distributed populations, and for non-normal populations as well; comparison of two populations; themore » analysis of variance; quality control procedures; and linear regression analysis.« less

HPTLC Fingerprint Analysis: A Quality Control for Authentication of Herbal Phytochemicals

NASA Astrophysics Data System (ADS)

Ram, Mauji; Abdin, M. Z.; Khan, M. A.; Jha, Prabhakar

Authentication and consistent quality are the basic requirement for Indian traditional medicine (TIM), Chinese traditional herbal medicine (TCHM), and their commercial products, regardless of the kind of research conducted to modernize the TIM and TCHM. The complexities of TIM and TCHM challenge the current official quality control mode, for which only a few biochemical markers were selected for identification and quantitative assay. Referring too many unknown factors existed in TIM and TCHM, it is impossible and unnecessary to pinpoint qualitatively and quantitatively every single component contained in the herbal drug. Chromatographic fingerprint is a rational option to meet the need for more effective and powerful quality assessment to TIM and TCHM. The optimized chromatographic fingerprint is not only an alternative analytical tool for authentication, but also an approach to express the various pattern of chemical ingredients distribution in the herbal drugs and preserve such "database" for further multifaced sustainable studies. Analytical separation techniques, for example, high-performance liquid chromatography (HPLC), gas chromatography (GC) and mass spectrometry (MS) were among the most popular methods of choice used for quality control of raw material and finished herbal product. Fingerprint analysis approach using high-performance thin-layer chromatography (HPTLC) has become the most potent tool for quality control of herbal medicines because of its simplicity and reliability. It can serve as a tool for identification, authentication, and quality control of herbal drugs. In this chapter, attempts are being made to expand the use of HPTLC and at the same time create interest among prospective researcher in herbal analysis. The developed method can be used as a quality control tool for rapid authentication from a wide variety of herbal samples. Some examples demonstrated the role of fingerprinting in quality control and assessment.

Centrifugation. Sludge Treatment and Disposal Course #166. Instructor's Guide [and] Student Workbook.

ERIC Educational Resources Information Center

Best, Richard A.

An introductory description of the use of centrifuges in the process of volume reduction is provided in this lesson. Three basic centrifuges, their theory of operation, quality of cake and centrate, and operational control testing are discussed. The lesson includes an instructor's guide and student workbook. The instructor's guide contains a…

Inorganic Analyses in Water Quality Control Programs. Training Manual.

ERIC Educational Resources Information Center

Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.

This document is a lecture/laboratory manual dealing with the analysis of selected inorganic pollutants. The manual is an instructional aid for classroom presentations to those with little or no experience in the field, but having one year (or equivalent) of college level inorganic chemistry and having basic laboratory skills. Topics include:…

Organic Analyses in Water Quality Control Programs. Training Manual.

ERIC Educational Resources Information Center

Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.

This document is a lecture/laboratory manual dealing with the analysis of selected organic pollutants. It is intended for use by those having little or no experience in the field, but having one year (or equivalent) of college organic chemistry, and having basic laboratory skills (volumetric glassware, titration, analytical and trip balances).…

Consistency of Hydrologic Relationships of a Paired Watershed Approach

Treesearch

Herbert Ssegane; Devendra M. Amatya; George M. Chescheir; Wayne R. Skaggs; Ernest W. Tollner; Jami E. Nettles

2013-01-01

Paired watershed studies are used around the world to evaluate and quantify effects of forest and water management practices on hydrology and water quality. The basic concept uses two neighboring watersheds (one as a control and another as a treatment), which are concurrently monitored during calibration (pre-treatment) and post-treatment periods. A statistically...

Taking advantage of ground data systems attributes to achieve quality results in testing software

NASA Technical Reports Server (NTRS)

Sigman, Clayton B.; Koslosky, John T.; Hageman, Barbara H.

1994-01-01

During the software development life cycle process, basic testing starts with the development team. At the end of the development process, an acceptance test is performed for the user to ensure that the deliverable is acceptable. Ideally, the delivery is an operational product with zero defects. However, the goal of zero defects is normally not achieved but is successful to various degrees. With the emphasis on building low cost ground support systems while maintaining a quality product, a key element in the test process is simulator capability. This paper reviews the Transportable Payload Operations Control Center (TPOCC) Advanced Spacecraft Simulator (TASS) test tool that is used in the acceptance test process for unmanned satellite operations control centers. The TASS is designed to support the development, test and operational environments of the Goddard Space Flight Center (GSFC) operations control centers. The TASS uses the same basic architecture as the operations control center. This architecture is characterized by its use of distributed processing, industry standards, commercial off-the-shelf (COTS) hardware and software components, and reusable software. The TASS uses much of the same TPOCC architecture and reusable software that the operations control center developer uses. The TASS also makes use of reusable simulator software in the mission specific versions of the TASS. Very little new software needs to be developed, mainly mission specific telemetry communication and command processing software. By taking advantage of the ground data system attributes, successful software reuse for operational systems provides the opportunity to extend the reuse concept into the test area. Consistency in test approach is a major step in achieving quality results.

42 CFR 417.106 - Quality assurance program; Availability, accessibility, and continuity of basic and supplemental...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Qualified Health Maintenance Organizations: Services § 417.106 Quality assurance program; Availability, accessibility, and continuity of basic and supplemental health services. (a) Quality assurance program. Each HMO or CMP must have an ongoing quality assurance program for its health services that meets the...

[Quality of information analysis on basic causes of neonatal deaths recorded in the Mortality Information System: a study in Maceió, Alagoas State, Brazil, 2001-2002].

PubMed

Pedrosa, Linda Délia C O; Sarinho, Silvia W; Ordonha, Manoelina R

2007-10-01

Analysis of the quality of information on basic causes of neonatal deaths in Brazil is crucially important, since it allows one to estimate how many deaths are avoidable and provide support for policies to decrease neonatal mortality. The current study aimed to evaluate the reliability and validity of the Mortality Information System (MIS) for discriminating between basic causes of neonatal deaths and defining percentages of reducible causes. The basic causes of early neonatal deaths in hospitals in Maceió, Alagoas State, were analyzed, and the causes recorded in medical records were compared to the MIS data in order to measure reliability and validity. The modified SEADE Foundation and Wigglesworth classifications were compared to analyze the capacity for reduction of neonatal mortality. Maternal causes predominated in the medical records, as compared to respiratory disorders on the death certificates and in the MIS. The percentage of avoidable deaths may be much higher than observed from the MIS, due to imprecision in completing death certificates. Based on the MIS, the greatest problems are in early diagnosis and treatment of neonatal causes. However, the results show that the most pressing problems relate to failures in prenatal care and lack of control of diseases.

MIL-H-8501B: Application to shipboard terminal operations

NASA Technical Reports Server (NTRS)

Cappetta, A. N.; Johns, J. B.

1993-01-01

The philosophy and structure of the proposed U.S. Military Specification for Handling Qualities Requirements for Military Rotorcraft, MIL-H-8501B, are presented with emphasis on shipboard terminal operations. The impact of current and future naval operational requirements on the selection of appropriate combinations of basic vehicle dynamics and usable cue environments are identified. An example 'walk through' of MIL-H-8501B is conducted from task identification to determination of stability and control requirements. For selected basic vehicle dynamics, criteria as a function of input/response magnitude are presented. Additionally, rotorcraft design development implications are discussed.

The derivation of water quality criteria of copper in Biliu River

NASA Astrophysics Data System (ADS)

Zheng, Hongbo; Jia, Xinru

2018-03-01

Excessive copper in water can be detrimental to the health of human and aquatic life. China has promulgated Environmental Quality Standards for Surface Water to control water pollution, but uniform standard values may cause under-protection or over-protection. Therefore, the basic research work on water quality criteria of water source or reservoir is urgently needed. This study deduces the acute and chronic Water Quality Criteria (WQC) of copper in Biliu River by Species Sensitivity Distribution method (SSD). The result shows that BiDoseResp is the most suitable model and the acute and chronic water quality benchmark of copper are 10.72 µg•L-1 and 5.86 µg•L-1. This study provides basis for the construction of water quality standard of Liaoning and the environmental management of Biliu River.

Feasibility study of transmission of OTV camera control information in the video vertical blanking interval

NASA Technical Reports Server (NTRS)

White, Preston A., III

1994-01-01

The Operational Television system at Kennedy Space Center operates hundreds of video cameras, many remotely controllable, in support of the operations at the center. This study was undertaken to determine if commercial NABTS (North American Basic Teletext System) teletext transmission in the vertical blanking interval of the genlock signals distributed to the cameras could be used to send remote control commands to the cameras and the associated pan and tilt platforms. Wavelength division multiplexed fiberoptic links are being installed in the OTV system to obtain RS-250 short-haul quality. It was demonstrated that the NABTS transmission could be sent over the fiberoptic cable plant without excessive video quality degradation and that video cameras could be controlled using NABTS transmissions over multimode fiberoptic paths as long as 1.2 km.

An Angular Method with Position Control for Block Mesh Squareness Improvement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yao, J.; Stillman, D.

We optimize a target function de ned by angular properties with a position control term for a basic stencil with a block-structured mesh, to improve element squareness in 2D and 3D. Comparison with the condition number method shows that besides a similar mesh quality regarding orthogonality can be achieved as the former does, the new method converges faster and provides a more uniform global mesh spacing in our numerical tests.

Effect of peach gum polysaccharides on quality changes of white shrimp.

PubMed

Yao, Xing-Cun; Chang, Cheng-Fei; Wu, Sheng-Jun

2015-01-01

Peach gum polysaccharides (PGPs) have both antibacterial and antioxidant activities. In this study, the retardation effect of the PGPs on the quality changes of white shrimp (Penaeus vannamei) during refrigerated storage was investigated. Shrimp samples were untreated with different concentrations of the PGPs solution and then they were stored under refrigerated conditions for 10 days. During refrigerated storage, shrimp samples were taken periodically and their total viable count, pH value, total volatile basic nitrogen, and overall acceptability score were evaluated. Compared to the control, treatment of the PGPs solution effectively retarded bacterial growth and pH changes, reduced total volatile basic nitrogen, and increased overall acceptability score of white shrimp (P. vannamei) during refrigerated storage. The results indicate that treatment of PGPs could be a promising means to preserve white shrimp (P. vannamei). Copyright © 2014 Elsevier B.V. All rights reserved.

The Relationship of Discourse and Topic Knowledge to Fifth Graders' Writing Performance

ERIC Educational Resources Information Center

Olinghouse, Natalie G.; Graham, Steve; Gillespie, Amy

2015-01-01

This study examined whether discourse and topic knowledge separately predicted the overall quality and the inclusion of basic genre elements in 5th grade students' stories, persuasive papers, and informational text once the other type of knowledge as well as topic interest, spelling, handwriting fluency, length of text, and gender were controlled.…

Isozyme studies of forest insect populations

Treesearch

Molly W. Stock

1981-01-01

Data from isozyme analyses are being used to help answer many basic biological questions about forest insect pests and to provide information for a variety of other purposes as well. This paper summarizes the uses of isozymes in quality control of laboratory insect colonies, in studies of insecticide response, as markers of insect parasitoids, and in investigations of...

75 FR 6307 - Approval and Promulgation of Air Quality Implementation Plans; Maryland; Control of Carbon...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-09

... Oxygen Furnaces AGENCY: Environmental Protection Agency (EPA). ACTION: Direct final rule. SUMMARY: EPA is... carbon monoxide (CO) emissions from basic oxygen furnaces (BOFs) at steel mills in the State of Maryland... blast furnace and scrap metal which is heated with oxygen to produce molten metal. The molten metal is...

Conceptual design study of a Harrier V/STOL research aircraft

NASA Technical Reports Server (NTRS)

Bode, W. E.; Berger, R. L.; Elmore, G. A.; Lacey, T. R.

1978-01-01

MCAIR recently completed a conceptual design study to define modification approaches to, and derive planning prices for the conversion of a two place Harrier to a V/STOL control, display and guidance research aircraft. Control concepts such as rate damping, attitude stabilization, velocity command, and cockpit controllers are to be demonstrated. Display formats will also be investigated, and landing, navigation and guidance systems flight tested. The rear cockpit is modified such that it can be quickly adapted to faithfully simulate the controls, displays and handling qualities of a Type A or Type B V/STOL. The safety pilot always has take command capability. The modifications studied fall into two categories: basic modifications and optional modifications. Technical descriptions of the basic modifications and of the optional modifications are presented. The modification plan and schedule as well as the test plan and schedule are presented. The failure mode and effects analysis, aircraft performance, aircraft weight, and aircraft support are discussed.

[Basic considerations during outsourcing of clinical data management services].

PubMed

Shen, Tong; Liu, Yan

2015-11-01

With worldwide improvements in the regulations of international and domestic clinical trial conductions, the quality of clinical trials and trial data management are receiving a great deal of attention. To ensure the quality of clinical trials, maintain business flexibilities and effectively utilize internal and external resources, the outsourcing model is used in the management of clinical data in operation of pharmaceutical companies. The essential criteria of a successful outsourcing mode in clinical trial are selection of qualified contract research organizations (CRO); establishment of appropriate outsourcing model, and generation of effective quality control systems to ensure the authenticity, integrity and accuracy of the clinical trial data.

Extraction of Lateral-Directional Stability and Control Derivatives for the Basic F-18 Aircraft at High Angles of Attack

NASA Technical Reports Server (NTRS)

Iliff, Kenneth W.; Wang, Kon-Sheng Charles

1997-01-01

The results of parameter identification to determine the lateral-directional stability and control derivatives of an F-18 research aircraft in its basic hardware and software configuration are presented. The derivatives are estimated from dynamic flight data using a specialized identification program developed at NASA Dryden Flight Research Center. The formulation uses the linearized aircraft equations of motions in their continuous/discrete form and a maximum likelihood estimator that accounts for both state and measurement noise. State noise is used to model the uncommanded forcing function caused by unsteady aerodynamics, such as separated and vortical flows, over the aircraft. The derivatives are plotted as functions of angle of attack between 3 deg and 47 deg and compared with wind-tunnel predictions. The quality of the derivative estimates obtained by parameter identification is somewhat degraded because the maneuvers were flown with the aircraft's control augmentation system engaged, which introduced relatively high correlations between the control variables and response variables as a result of control motions from the feedback control system.

[The main directions of improving the system of state accounting and control of radioactive substances and radioactive waste products].

PubMed

2012-01-01

This paper describes a modification of the basic directions of state accounting and control of radioactive substances and radioactive waste products, whose implementation will significantly improve the efficiency of its operation at the regional level. Selected areas are designed to improve accounting and control system for the submission of the enterprises established by the reporting forms, the quality of the information contained in them, as well as structures of information and process for collecting, analyzing and data processing concerning radioactive substances and waste products.

Low Quality of Basic Caregiving Environments in Child Care: Actual Reality or Artifact of Scoring?

ERIC Educational Resources Information Center

Norris, Deborah J.; Guss, Shannon

2016-01-01

Quality Rating Improvement Systems (QRIS) frequently include the Infant-Toddler Environment Rating Scale-Revised (ITERS-R) as part of rating and improving child care quality. However, studies utilizing the ITERS-R consistently report low quality, especially for basic caregiving items. This research examined whether the low scores reflected the…

A theory of eu-estrogenemia: a unifying concept

PubMed Central

Turner, Ralph J.; Kerber, Irwin J.

2017-01-01

Abstract Objective: The aim of the study was to propose a unifying theory for the role of estrogen in postmenopausal women through examples in basic science, randomized controlled trials, observational studies, and clinical practice. Methods: Review and evaluation of the literature relating to estrogen. Discussion: The role of hormone therapy and ubiquitous estrogen receptors after reproductive senescence gains insight from basic science models. Observational studies and individualized patient care in clinical practice may show outcomes that are not reproduced in randomized clinical trials. The understanding gained from the timing hypothesis for atherosclerosis, the critical window theory in neurosciences, randomized controlled trials, and numerous genomic and nongenomic actions of estrogen discovered in basic science provides new explanations to clinical challenges that practitioners face. Consequences of a hypo-estrogenemic duration in women's lives are poorly understood. The Study of Women Across the Nation suggests its magnitude is greater than was previously acknowledged. We propose that the healthy user bias was the result of surgical treatment (hysterectomy with oophorectomy) for many gynecological maladies followed by pharmacological and physiological doses of estrogen to optimize patient quality of life. The past decade of research has begun to demonstrate the role of estrogen in homeostasis. Conclusions: The theory of eu-estrogenemia provides a robust framework to unify the timing hypothesis, critical window theory, randomized controlled trials, the basic science of estrogen receptors, and clinical observations of patients over the past five decades. PMID:28562489

Quality control system preparation for photogrammetric and laser scanning missions of Spanish national plan of aerial orthophotogpaphy (PNOA). (Polish Title: Opracowanie systemu kontroli jakości realizacji nalotów fotogrametrycznych i skaningowych dla hiszpańskiego narodowego planu ortofotomapy lotniczej (PNOA))

NASA Astrophysics Data System (ADS)

Rzonca, A.

2013-12-01

The paper presents the state of the art of quality control of photogrammetric and laser scanning data captured by airborne sensors. The described subject is very important for photogrammetric and LiDAR project execution, because the data quality a prior decides about the final product quality. On the other hand, precise and effective quality control process allows to execute the missions without wide margin of safety, especially in case of the mountain areas projects. For introduction, the author presents theoretical background of the quality control, basing on his own experience, instructions and technical documentation. He describes several variants of organization solutions. Basically, there are two main approaches: quality control of the captured data and the control of discrepancies of the flight plan and its results of its execution. Both of them are able to use test of control and analysis of the data. The test is an automatic algorithm controlling the data and generating the control report. Analysis is a less complicated process, that is based on documentation, data and metadata manual check. The example of quality control system for large area project was presented. The project is being realized periodically for the territory of all Spain and named National Plan of Aerial Orthophotography (Plan Nacional de Ortofotografía Aérea, PNOA). The system of the internal control guarantees its results soon after the flight and informs the flight team of the company. It allows to correct all the errors shortly after the flight and it might stop transferring the data to another team or company, for further data processing. The described system of data quality control contains geometrical and radiometrical control of photogrammetric data and geometrical control of LiDAR data. According to all specified parameters, it checks all of them and generates the reports. They are very helpful in case of some errors or low quality data. The paper includes the author experience in the field of data quality control, presents the conclusions and suggestions of the organization and technical aspects, with a short definition of the necessary control software.

Choice of mathematical models for technological process of glass rod drawing

NASA Astrophysics Data System (ADS)

Alekseeva, L. B.

2017-10-01

The technological process of drawing glass rods (light guides) is considered. Automated control of the drawing process is reduced to the process of making decisions to ensure a given quality. The drawing process is considered as a control object, including the drawing device (control device) and the optical fiber forming zone (control object). To study the processes occurring in the formation zone, mathematical models are proposed, based on the continuum mechanics basics. To assess the influence of disturbances, a transfer function is obtained from the basis of the wave equation. Obtaining the regression equation also adequately describes the drawing process.

Cloud Motion Vectors from MISR using Sub-pixel Enhancements

NASA Technical Reports Server (NTRS)

Davies, Roger; Horvath, Akos; Moroney, Catherine; Zhang, Banglin; Zhu, Yanqiu

2007-01-01

The operational retrieval of height-resolved cloud motion vectors by the Multiangle Imaging SpectroRadiometer on the Terra satellite has been significantly improved by using sub-pixel approaches to co-registration and disparity assessment, and by imposing stronger quality control based on the agreement between independent forward and aft triplet retrievals. Analysis of the fore-aft differences indicates that CMVs pass the basic operational quality control 67% of the time, with rms differences - in speed of 2.4 m/s, in direction of 17 deg, and in height assignment of 290 m. The use of enhanced quality control thresholds reduces these rms values to 1.5 m/s, 17 deg and 165 m, respectively, at the cost of reduced coverage to 45%. Use of the enhanced thresholds also eliminates a tendency for the rms differences to increase with height. Comparison of CMVs from an earlier operational version that had slightly weaker quality control, with 6-hour forecast winds from the Global Modeling and Assimilation Office yielded very low bias values and an rms vector difference that ranged from 5 m/s for low clouds to 10 m/s for high clouds.

Preliminary experience of a PDCA-cycle and quality management based training curriculum for rat liver transplantation.

PubMed

Jin, Hao; Huang, Hai; Dong, Wei; Sun, Jian; Liu, Anding; Deng, Meihong; Dirsch, Olaf; Dahmen, Uta

2012-08-01

As repeatedly operating rat liver transplantation (LTx) until animals survive is inefficient in respect to time and use of living animals, we developed a new training concept. METHODS AND CONCEPTS: Training was divided into four phases: pretraining-phase, basic-microsurgical-training phase, advanced-microsurgical-training phases, and expert-microsurgical-training phase. Two "productivity-phases" were introduced right after the basic- and advanced-microsurgical-training phases, respectively, to allow the trainee to accumulate experience and to be scientifically productive before proceeding to a more complex procedure. PDCA cycles and quality criteria were employed to control the learning-process and the surgical quality. Predefined quality criteria included survival rate, intraoperative, postoperative, and histologic parameters. Three trainees participated in the LTx training and achieved their first survival record within 4-10 operations. All of them completely mastered the LTx in fewer procedures (31, 60 and 26 procedures) as reported elsewhere, and the more complex arterialized or partial LTx were mastered by trainee A and B in additional 9 and 13 procedures, respectively. Fast progress was possible due to a high number of training in the 2 Productivity-phases. The stepwise and PDCA-based training program increased the efficiency of LTx training, whereas the constant application and development of predefined quality criteria guaranteed the quality of microsurgery. Copyright © 2012 Elsevier Inc. All rights reserved.

[Discussion on research and development of new traditional Chinese medicine preparation process based on idea of QbD].

PubMed

Feng, Yi; Hong, Yan-Long; Xian, Jie-Chen; Du, Ruo-Fei; Zhao, Li-Jie; Shen, Lan

2014-09-01

Traditional processes are mostly adopted in traditional Chinese medicine (TCM) preparation production and the quality of products is mostly controlled by terminal. Potential problems of the production in the process are unpredictable and is relied on experience in most cases. Therefore, it is hard to find the key points affecting the preparation process and quality control. A pattern of research and development of traditional Chinese medicine preparation process based on the idea of Quality by Design (QbD) was proposed after introducing the latest research achievement. Basic theories of micromeritics and rheology were used to characterize the physical property of TCM raw material. TCM preparation process was designed in a more scientific and rational way by studying the correlation among enhancing physical property of raw material, preparation process and product quality of preparation. So factors affecting the quality of TCM production would be found out and problems that might occur in the pilot process could be predicted. It would be a foundation for the R&D and production of TCM preparation as well as support for the "process control" of TCMIs gradually realized in the future.

Climatological Processing of Radar Data for the TRMM Ground Validation Program

NASA Technical Reports Server (NTRS)

Kulie, Mark; Marks, David; Robinson, Michael; Silberstein, David; Wolff, David; Ferrier, Brad; Amitai, Eyal; Fisher, Brad; Wang, Jian-Xin; Augustine, David;

Periplasmic quality control in biogenesis of outer membrane proteins.

PubMed

Lyu, Zhi Xin; Zhao, Xin Sheng

2015-04-01

The β-barrel outer membrane proteins (OMPs) are integral membrane proteins that reside in the outer membrane of Gram-negative bacteria and perform a diverse range of biological functions. Synthesized in the cytoplasm, OMPs must be transported across the inner membrane and through the periplasmic space before they are assembled in the outer membrane. In Escherichia coli, Skp, SurA and DegP are the most prominent factors identified to guide OMPs across the periplasm and to play the role of quality control. Although extensive genetic and biochemical analyses have revealed many basic functions of these periplasmic proteins, the mechanism of their collaboration in assisting the folding and insertion of OMPs is much less understood. Recently, biophysical approaches have shed light on the identification of the intricate network. In the present review, we summarize recent advances in the characterization of these key factors, with a special emphasis on the multifunctional protein DegP. In addition, we present our proposed model on the periplasmic quality control in biogenesis of OMPs.

Cairo consensus on the IVF laboratory environment and air quality: report of an expert meeting.

PubMed

Mortimer, D; Cohen, J; Mortimer, S T; Fawzy, M; McCulloh, D H; Morbeck, D E; Pollet-Villard, X; Mansour, R T; Brison, D R; Doshi, A; Harper, J C; Swain, J E; Gilligan, A V

2018-03-02

This proceedings report presents the outcomes from an international Expert Meeting to establish a consensus on the recommended technical and operational requirements for air quality within modern assisted reproduction technology (ART) laboratories. Topics considered included design and construction of the facility, as well as its heating, ventilation and air conditioning system; control of particulates, micro-organisms (bacteria, fungi and viruses) and volatile organic compounds (VOCs) within critical areas; safe cleaning practices; operational practices to optimize air quality while minimizing physicochemical risks to gametes and embryos (temperature control versus air flow); and appropriate infection-control practices that minimize exposure to VOC. More than 50 consensus points were established under the general headings of assessing site suitability, basic design criteria for new construction, and laboratory commissioning and ongoing VOC management. These consensus points should be considered as aspirational benchmarks for existing ART laboratories, and as guidelines for the construction of new ART laboratories. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Longitudinal handling qualities during approach and landing of a powered lift STOL aircraft

NASA Technical Reports Server (NTRS)

Franklin, J. A.; Innis, R. C.

1972-01-01

Longitudinal handling qualities evaluations were conducted on the Ames Research Center Flight Simulator for Advanced Aircraft (FSAA) for the approach and landing tasks of a powered lift STOL research aircraft. The test vehicle was a C-8A aircraft modified with a new wing incorporating internal blowing over an augmentor flap. The investigation included: (1) use of various flight path and airspeed control techniques for the basic vehicle; (2) assessment of stability and command augmentation schemes for pitch attitude and airspeed control; (3) determination of the influence of longitudinal and vertical force coupling for the power control; (4) determination of the influence of pitch axis coupling with the thrust vector control; and (5) evaluations of the contribution of stability and command augmentation to recovery from a single engine failure. Results are presented in the form of pilot ratings and commentary substantiated by landing approach time histories.

Noise Protection

NASA Technical Reports Server (NTRS)

1980-01-01

Environmental Health Systems puts forth an increasing effort in the U.S. to develop ways of controlling noise, particularly in industrial environments due to Federal and State laws, labor union insistence and new findings relative to noise pollution impact on human health. NASA's Apollo guidance control system aided in the development of a noise protection product, SMART. The basis of all SMART products is SMART compound a liquid plastic mixture with exceptional energy/sound absorbing qualities. The basic compound was later refined for noise protection use.

Systematic Review of Plant-Based Homeopathic Basic Research: An Update.

PubMed

Ücker, Annekathrin; Baumgartner, Stephan; Sokol, Anezka; Huber, Roman; Doesburg, Paul; Jäger, Tim

2018-05-01

 Plant-based test systems have been described as a useful tool for investigating possible effects of homeopathic preparations. The last reviews of this research field were published in 2009/2011. Due to recent developments in the field, an update is warranted. Publications on plant-based test systems were analysed with regard to publication quality, reproducibility and potential for further research.  A literature search was conducted in online databases and specific journals, including publications from 2008 to 2017 dealing with plant-based test systems in homeopathic basic research. To be included, they had to contain statistical analysis and fulfil quality criteria according to a pre-defined manuscript information score (MIS). Publications scoring at least 5 points (maximum 10 points) were assumed to be adequate. They were analysed for the use of adequate controls, outcome and reproducibility.  Seventy-four publications on plant-based test systems were found. Thirty-nine publications were either abstracts or proceedings of conferences and were excluded. From the remaining 35 publications, 26 reached a score of 5 or higher in the MIS. Adequate controls were used in 13 of these publications. All of them described specific effects of homeopathic preparations. The publication quality still varied: a substantial number of publications (23%) did not adequately document the methods used. Four reported on replication trials. One replication trial found effects of homeopathic preparations comparable to the original study. Three replication trials failed to confirm the original study but identified possible external influencing factors. Five publications described novel plant-based test systems. Eight trials used systematic negative control experiments to document test system stability.  Regarding research design, future trials should implement adequate controls to identify specific effects of homeopathic preparations and include systematic negative control experiments. Further external and internal replication trials, and control of influencing factors, are needed to verify results. Standardised test systems should be developed. The Faculty of Homeopathy.

Impact of continuous in-home rehabilitation on quality of life and activities of daily living in elderly clients over 1 year.

PubMed

Imanishi, Miyuki; Tomohisa, Hisao; Higaki, Kazuo

2017-11-01

To verify the effect of in-home rehabilitation on quality of life and activities of daily living in elderly clients. In this non-randomized controlled intervention trial, elderly participants were separated into a rehabilitation or a non-rehabilitation group (n = 100 each). The non-rehabilitation group received basic in-home nursing care, including assistance with cooking, cleaning, toileting, meals and medication. The rehabilitation group received a physical treatment program provided by a licensed professional once a week and basic nursing care in the home. For each group, quality of life and activities of daily living were assessed approximately every 3 months over a 1-year period. Quality of life was evaluated using the Philadelphia Geriatric Center Morale Scale, and activities of daily living were evaluated based on the Functional Independence Measure. The rehabilitation group showed statistically significant improvements in both quality of life and activities of daily living. In contrast, the non-rehabilitation group, although showing slight improvement in quality of life at 9 months, showed almost no effects at the other time-points and no significant changes in activities of daily living over the course of the study. The results of the present study suggest that long-term continuous in-home rehabilitation might improve quality of life and activities of daily living in elderly clients. Geriatr Gerontol Int 2017; 17: 1866-1872. © 2017 Japan Geriatrics Society.

Qualification Procedures for VHSIC/VLSI

DTIC Science & Technology

1990-12-01

alternative approach for qualification of complex microcircuits. To address the technical issues related to a process oriented qualification approach, the...methodology of microcircuit process control to promote the United States to a position of supplying the nighest quality and most reliable...available resources . o Coordinate document reviews with weekly and monthly status reviews on progress. o Summarize results and collate into four basic

Real-Time Mutual Gaze Perception Enhances Collaborative Learning and Collaboration Quality

ERIC Educational Resources Information Center

Schneider, Bertrand; Pea, Roy

2013-01-01

In this paper we present the results of an eye-tracking study on collaborative problem-solving dyads. Dyads remotely collaborated to learn from contrasting cases involving basic concepts about how the human brain processes visual information. In one condition, dyads saw the eye gazes of their partner on the screen; in a control group, they did not…

Pest Management and Environmental Quality. Course 181. Correspondence Courses in Agriculture, Family Living and Community Development.

ERIC Educational Resources Information Center

Cole, Herbert, Jr.; And Others

This publication is the course book for a correspondence course in pest control with the Pennsylvania State University. It contains basic information for agricultural producers on pest management and the proper and safe use of pesticides. The course consists of eleven lessons which can be completed at one's leisure. The first nine lessons contain…

Design and development of a structural mode control system

NASA Technical Reports Server (NTRS)

1977-01-01

A program was conducted to compile and document some of the existing information about the conceptual design, development, and tests of the B-1 structural mode control system (SMCS) and its impact on ride quality. This report covers the following topics: (1) Rationale of selection of SMCS to meet ride quality criteria versus basic aircraft stiffening. (2) Key considerations in designing an SMCS, including vane geometry, rate and deflection requirements, power required, compensation network design, and fail-safe requirements. (3) Summary of key results of SMCS vane wind tunnel tests. (4) SMCS performance. (5) SMCS design details, including materials, bearings, and actuators. (6) Results of qualification testing of SMCS on the "Iron Bird" flight control simulator, and lab qualification testing of the actuators. (7) Impact of SMCS vanes on engine inlet characteristics from wind tunnel tests.

Function evaluation of asphalt mixture with industrially produced BOF slag aggregate.

PubMed

Zhao, Meiling; Wu, Shaopeng; Chen, Zongwu; Li, Chao

2016-07-04

Laboratory research suggested that basic oxygen furnace (BOF) slag-based asphalt mixture was a functional material. However, the BOF slag aggregate's quality was difficult to control when it was heavily used in entity engineering. The primary objective of this research was to evaluate the functional performances of asphalt mixture containing BOF slag coarse aggregate (BSCA), which was from an industrialized production line. Limestone mixture was a control group. The Marshall method was first adopted to design asphalt mixtures. The performances of limestone asphalt mixture and BOF slag asphalt mixture including fatigue failure resistance and moisture stability were then evaluated and compared. Results showed that the asphalt mixture containing BSCA possessed better durability, which meant the quality of BSCA from industrialized production lines was well controlled and this BSCA can be heavily used in entity engineering.

Rationale and Methods for Archival Sampling and Analysis of Atmospheric Trace Chemical Contaminants On Board Mir and Recommendations for the International Space Station

NASA Technical Reports Server (NTRS)

Perry, J. L.; James, J. T.; Cole, H. E.; Limero, T. F.; Beck, S. W.

1997-01-01

Collection and analysis of spacecraft cabin air samples are necessary to assess the cabin air quality with respect to crew health. Both toxicology and engineering disciplines work together to achieve an acceptably clean cabin atmosphere. Toxicology is concerned with limiting the risk to crew health from chemical sources, setting exposure limits, and analyzing air samples to determine how well these limits are met. Engineering provides the means for minimizing the contribution of the various contaminant generating sources by providing active contamination control equipment on board spacecraft and adhering to a rigorous material selection and control program during the design and construction of the spacecraft. A review of the rationale and objectives for sampling spacecraft cabin atmospheres is provided. The presently-available sampling equipment and methods are reviewed along with the analytical chemistry methods employed to determine trace contaminant concentrations. These methods are compared and assessed with respect to actual cabin air quality monitoring needs. Recommendations are presented with respect to the basic sampling program necessary to ensure an acceptably clean spacecraft cabin atmosphere. Also, rationale and recommendations for expanding the scope of the basic monitoring program are discussed.

Toward a perceptual video-quality metric

NASA Astrophysics Data System (ADS)

Watson, Andrew B.

1998-07-01

The advent of widespread distribution of digital video creates a need for automated methods for evaluating the visual quality of digital video. This is particularly so since most digital video is compressed using lossy methods, which involve the controlled introduction of potentially visible artifacts. Compounding the problem is the bursty nature of digital video, which requires adaptive bit allocation based on visual quality metrics, and the economic need to reduce bit-rate to the lowest level that yields acceptable quality. In previous work, we have developed visual quality metrics for evaluating, controlling,a nd optimizing the quality of compressed still images. These metrics incorporate simplified models of human visual sensitivity to spatial and chromatic visual signals. Here I describe a new video quality metric that is an extension of these still image metrics into the time domain. Like the still image metrics, it is based on the Discrete Cosine Transform. An effort has been made to minimize the amount of memory and computation required by the metric, in order that might be applied in the widest range of applications. To calibrate the basic sensitivity of this metric to spatial and temporal signals we have made measurements of visual thresholds for temporally varying samples of DCT quantization noise.

The UK Stem Cell Bank: a UK government-funded, international resource center for stem cell research.

PubMed

Stacey, Glyn; Hunt, Charles J

2006-01-01

The UK Stem Cell Bank is a UK Research Council-funded initiative that aims to provide ethically sourced and quality controlled stocks of cells for researchers and also establish seed stocks of cell lines for clinical trials. Whilst the Bank is prohibited from carrying out basic stem cell research (to avoid conflicts of interest) it is working to improve stem cell banking procedures including cryopreservation, characterization and quality control. The Bank also supports training activities and has provided the hub for the International Stem Cell Initiative, which includes 17 expert stem cell centers aiming to characterize a large number of human embryonic stem cell lines in a standardized way to improve our understanding of the characteristics of these cells.

Thyroid and parathyroid imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandler, M.P.; Patton, J.A.; Partain, C.L.

1986-01-01

This book describes the numerous modalities currently used in the diagnosis and treatment of both thyroid and parathyroid disorders. Each modality is fully explained and then evaluated in terms of benefits and limitations in the clinical context. Contents: Production and Quality Control of Radiopharmaceutics Used for Diagnosis and Therapy in Thyroid and Parathyroid Disorders. Basic Physics. Nuclear Instrumentation. Radioimmunoassay: Thyroid Function Tests. Quality Control. Embryology, Anatomy, Physiology, and Thyroid Function Studies. Scintigraphic Thyroid Imaging. Neonatal and Pediatric Thyroid Imaging. Radioiodine Thyroid Uptake Measurement. Radioiodine Treatment of Thyroid Disorders. Radiation Dosimetry of Diagnostic Procedures. Radiation Safety Procedures for High-Level I-131 Therapies.more » X-Ray Fluorescent Scanning. Thyroid Sonography. Computed Tomography in Thyroid Disease. Magnetic Resonance Imaging in Thyroid Disease. Parathyroid Imaging.« less

An introduction to statistical process control in research proteomics.

PubMed

Bramwell, David

2013-12-16

Statistical process control is a well-established and respected method which provides a general purpose, and consistent framework for monitoring and improving the quality of a process. It is routinely used in many industries where the quality of final products is critical and is often required in clinical diagnostic laboratories [1,2]. To date, the methodology has been little utilised in research proteomics. It has been shown to be capable of delivering quantitative QC procedures for qualitative clinical assays [3] making it an ideal methodology to apply to this area of biological research. To introduce statistical process control as an objective strategy for quality control and show how it could be used to benefit proteomics researchers and enhance the quality of the results they generate. We demonstrate that rules which provide basic quality control are easy to derive and implement and could have a major impact on data quality for many studies. Statistical process control is a powerful tool for investigating and improving proteomics research work-flows. The process of characterising measurement systems and defining control rules forces the exploration of key questions that can lead to significant improvements in performance. This work asserts that QC is essential to proteomics discovery experiments. Every experimenter must know the current capabilities of their measurement system and have an objective means for tracking and ensuring that performance. Proteomic analysis work-flows are complicated and multi-variate. QC is critical for clinical chemistry measurements and huge strides have been made in ensuring the quality and validity of results in clinical biochemistry labs. This work introduces some of these QC concepts and works to bridge their use from single analyte QC to applications in multi-analyte systems. This article is part of a Special Issue entitled: Standardization and Quality Control in Proteomics. Copyright © 2013 The Author. Published by Elsevier B.V. All rights reserved.

Quality changes of the Mediterranean horse mackerel ( Trachurus mediterraneus) during chilled storage: The effect of low-dose gamma irradiation

NASA Astrophysics Data System (ADS)

Mbarki, Raouf; Sadok, Saloua; Barkallah, Insaf

2009-04-01

Pelagic fishes represent the main Mediterranean fisheries in terms of quantity. However, waste and spoilage of pelagic fish are substantial for a variety of reasons, such as their high perishability and the lack or inadequate supply of ice and freezing facilities. In this work, fresh Mediterranean horse mackerel ( Trachurus mediterraneus) were irradiated at 1 and 2 kGy and stored in ice for 18 days. Quality changes during storage were followed by the determination of microbial counts, trimethylamine (TMA) and volatile basic nitrogen contents. Similarly, lipid composition and sensory analysis were carried out. Irradiation treatment was effective in reducing total bacterial counts throughout storage. Total basic volatile nitrogen content (TVB-N) and TMA levels increased in all lots with storage time, their concentrations being significantly reduced by irradiation, even when the lower level (1 kGy) was used. According to the quality index method, the control lot had a sensory shelf-life of 4 days, whereas those of the irradiated lots were extended by 5 days. Also, low-dose irradiation had no adverse effect on the nutritionally important polyunsaturated fatty acids (PUFA) of Mediterranean horse mackerel. In the same way, thiobarbituric acid-reactive substances values increased with irradiation during the first day, but these values were lower at the end of storage, compared to the control. Results confirm the practical advantages of using γ irradiation as an additional process to chilled storage to enhance the microbiological quality and to extend the shelf-life of small pelagic species.

Teachers' Incentives and Professional Development in Schools in Mexico. Working Paper.

ERIC Educational Resources Information Center

Lopez-Acevedo, Gladys

Quality of education is a determining factor in a nation's competitiveness. Although Mexico has made tremendous progress toward achieving universal basic education, school quality has not kept pace with enrollment increases, especially in rural areas. Innovations at the federal and state levels to raise the quality of basic education in Mexico…

Adult Basic and Literacy Education Program: Revised Indicators of Program Quality, Fiscal Year 2004.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document lists the Ohio Department of Education's Adult Basic and Literacy Education revised indicators of program quality. A chart details the measures and performance standards for the following quality indicators: (1) students demonstrate progress toward attainment of literacy skills at levels of proficiency necessary to function on the…

Incorporating Handling Qualities Analysis into Rotorcraft Conceptual Design

NASA Technical Reports Server (NTRS)

Lawrence, Ben

2014-01-01

This paper describes the initial development of a framework to incorporate handling qualities analyses into a rotorcraft conceptual design process. In particular, the paper describes how rotorcraft conceptual design level data can be used to generate flight dynamics models for handling qualities analyses. Also, methods are described that couple a basic stability augmentation system to the rotorcraft flight dynamics model to extend analysis to beyond that of the bare airframe. A methodology for calculating the handling qualities characteristics of the flight dynamics models and for comparing the results to ADS-33E criteria is described. Preliminary results from the application of the handling qualities analysis for variations in key rotorcraft design parameters of main rotor radius, blade chord, hub stiffness and flap moment of inertia are shown. Varying relationships, with counteracting trends for different handling qualities criteria and different flight speeds are exhibited, with the action of the control system playing a complex part in the outcomes. Overall, the paper demonstrates how a broad array of technical issues across flight dynamics stability and control, simulation and modeling, control law design and handling qualities testing and evaluation had to be confronted to implement even a moderately comprehensive handling qualities analysis of relatively low fidelity models. A key outstanding issue is to how to 'close the loop' with an overall design process, and options for the exploration of how to feedback handling qualities results to a conceptual design process are proposed for future work.

[New idea of traditional Chinese medicine quality control based on "composition structure" theory].

PubMed

Liu, Dan; Jia, Xiaobin; Yu, Danhong

2012-03-01

On the road of the modern Chinese medicine developing internationally, there is a key issues that setting up a reasonable, accurate and be quantified quality evaluation system which is comply with the basic theory of Chinese medicine. Based on the overall understanding of the role of traditional Chinese medicine components, author suggested that the idea of "structural components" theory should be embedded into the system and thought the Chinese medicine play a multi-target, multi-channel pharmacodynamic effects founded on the specific microcosmic structural relationship between the components and the components within the group. At present, the way of Chinese pharmacopoeia checking the quality of Chinese medicine is mainly depends on controlling the single or multiple targets of ingredients. In fact, this way is out of the overall effectiveness of the Chinese medicine, so we can not thoroughly controlling the quality of Chinese medicine from the essence of the Chinese medicine. Secondly, it's only macro-structural quantity that the Chinese pharmacopoeia just controlling the less effective ingredients, this is not enough to reflect the internal microstructure of the integrity and systematic. In other words, this cannot reflect the structural components of the Chinese medicine (the essence of traditional Chinese medicine). In view of above mentioned reasons, the author propose the new idea on the quality control in the medicine that quantify the ratio structural relationship in component and the ingredients of the components, set the optimal controlling proportion between the components and ingredients. At the same time, author thought we should conduct the depth study in the micro-quantified the multi-component and multi-ingredient, in the process of studying the material basis of Chinese medicine. Therefore, it could establish a more rational basis for the Chinese medicine quality controlling system.

A piloted simulator investigation of augmentation systems to improve helicopter nap-of-the-earth handling qualities

NASA Technical Reports Server (NTRS)

Chen, R. T. N.; Talbot, P. D.; Gerdes, R. M.; Dugan, D. C.

1978-01-01

A piloted simulation study assessed various levels of stability and control augmentation designed to improve the handling qualities of several helicopters in nap-of-the-earth (NOE) flight. Five basic single rotor helicopters - one teetering, two articulated, and two hingeless - which were found to have a variety of major deficiencies in a previous fixed-based simulator study were selected as baseline configurations. The stability and control augmentation systems (SCAS) include simple control augmentation systems (CAS) to decouple pitch and yaw responses due to collective input and to quicken the pitch and roll control responses; SCAS of rate command type designed to optimize the sensitivity and damping and to decouple the pitch-roll due to aircraft angular rate; and attitude command type SCAS. Pilot ratings and commentary are presented as well as performance data related to the task. SCAS control usage and their gain levels associated with specific rotor type are also discussed.

Methotrexate Reduces DNA Integrity in Sperm From Men With Inflammatory Bowel Disease.

PubMed

Ley, Dana; Jones, Jeffrey; Parrish, John; Salih, Sana; Caldera, Freddy; Tirado, Edna; Leader, Benjamin; Saha, Sumona

2018-06-01

There are few data on the effects of methotrexate on reproductive capacity in men with inflammatory bowel diseases (IBDs). We performed a case-control study to determine the effects of methotrexate on sperm quality and genetic integrity. We compared sperm samples from 7 men with IBD who had been exposed to methotrexate for at least 3 months with sperm samples collected from 1912 age-matched men at fertility centers (controls) where sperm parameters would be expected to be worse than those of the general population. Sperm were evaluated by basic semen analysis and advanced sperm integrity testing. In samples from men with IBD, all basic semen analysis parameters were within normal limits. However, these samples had reduced sperm integrity, based on significant increases in levels of DNA fragmentation and damage from oxidative stress compared with controls. Our findings indicate that methotrexate can reduce DNA integrity in sperm and cause damage via oxidative stress. Copyright © 2018 AGA Institute. Published by Elsevier Inc. All rights reserved.

Priority for a Quality Basic Education. A First Report to Governor Joe Frank Harris and the Georgia General Assembly.

ERIC Educational Resources Information Center

Georgia Governor's Education Review Commission, Atlanta.

This report defines what is meant by quality basic education in Georgia and makes numerous recommendations for achieving it for all Georgians. The recommendations are that: (1) basic skills and general job skills be emphasized in vocational education; (2) the salary base for teachers be increased; (3) a five plateau teacher career ladder be…

Discussion and theoretical summarization of the experimental data. [psychophysiology in human factors engineering

NASA Technical Reports Server (NTRS)

Mileryan, Y. A.

1975-01-01

A summary of research on psychological factors that cause substantial changes in the reliability indicators of an operators work is followed by a conclusion that strong moral-volitional qualities are the basic factors that make the human behavior under conditions of stress effective; emotional subcortical subdominants affect a person's conscious organization and self control in a man machine environment.

Implementation of Quality Management in Core Service Laboratories

PubMed Central

Creavalle, T.; Haque, K.; Raley, C.; Subleski, M.; Smith, M.W.; Hicks, B.

2010-01-01

CF-28 The Genetics and Genomics group of the Advanced Technology Program of SAIC-Frederick exists to bring innovative genomic expertise, tools and analysis to NCI and the scientific community. The Sequencing Facility (SF) provides next generation short read (Illumina) sequencing capacity to investigators using a streamlined production approach. The Laboratory of Molecular Technology (LMT) offers a wide range of genomics core services including microarray expression analysis, miRNA analysis, array comparative genome hybridization, long read (Roche) next generation sequencing, quantitative real time PCR, transgenic genotyping, Sanger sequencing, and clinical mutation detection services to investigators from across the NIH. As the technology supporting this genomic research becomes more complex, the need for basic quality processes within all aspects of the core service groups becomes critical. The Quality Management group works alongside members of these labs to establish or improve processes supporting operations control (equipment, reagent and materials management), process improvement (reengineering/optimization, automation, acceptance criteria for new technologies and tech transfer), and quality assurance and customer support (controlled documentation/SOPs, training, service deficiencies and continual improvement efforts). Implementation and expansion of quality programs within unregulated environments demonstrates SAIC-Frederick's dedication to providing the highest quality products and services to the NIH community.

A novel frame-level constant-distortion bit allocation for smooth H.264/AVC video quality

NASA Astrophysics Data System (ADS)

Liu, Li; Zhuang, Xinhua

2009-01-01

It is known that quality fluctuation has a major negative effect on visual perception. In previous work, we introduced a constant-distortion bit allocation method [1] for H.263+ encoder. However, the method in [1] can not be adapted to the newest H.264/AVC encoder directly as the well-known chicken-egg dilemma resulted from the rate-distortion optimization (RDO) decision process. To solve this problem, we propose a new two stage constant-distortion bit allocation (CDBA) algorithm with enhanced rate control for H.264/AVC encoder. In stage-1, the algorithm performs RD optimization process with a constant quantization QP. Based on prediction residual signals from stage-1 and target distortion for smooth video quality purpose, the frame-level bit target is allocated by using a close-form approximations of ratedistortion relationship similar to [1], and a fast stage-2 encoding process is performed with enhanced basic unit rate control. Experimental results show that, compared with original rate control algorithm provided by H.264/AVC reference software JM12.1, the proposed constant-distortion frame-level bit allocation scheme reduces quality fluctuation and delivers much smoother PSNR on all testing sequences.

Approach to method development and validation in capillary electrophoresis for enantiomeric purity testing of active basic pharmaceutical ingredients.

PubMed

Sokoliess, Torsten; Köller, Gerhard

2005-06-01

A chiral capillary electrophoresis system allowing the determination of the enantiomeric purity of an investigational new drug was developed using a generic method development approach for basic analytes. The method was optimized in terms of type and concentration of both cyclodextrin (CD) and electrolyte, buffer pH, temperature, voltage, and rinsing procedure. Optimal chiral separation of the analyte was obtained using an electrolyte with 2.5% carboxymethyl-beta-CD in 25 mM NaH2PO4 (pH 4.0). Interchanging the inlet and outlet vials after each run improved the method's precision. To assure the method's suitability for the control of enantiomeric impurities in pharmaceutical quality control, its specificity, linearity, precision, accuracy, and robustness were validated according to the requirements of the International Conference on Harmonization. The usefulness of our generic method development approach for the validation of robustness was demonstrated.

Clinical governance and infection control in the United Kingdom.

PubMed

Masterson, R G; Teare, E L

2001-01-01

The recent organizational changes in the NHS have at their core the concept of clinical governance. Although initially poorly defined and understood this term has now taken on a clear identity, placing quality alongside fiscal probity and corporate governance at the top of NHS priorities. Integral to clinical governance are the basic elements of clear national standards for services and treatments that are to be locally delivered through assured, monitored, high quality healthcare. It is within this framework that workers in infection control must develop their own methods of applying clinical governance. This review explores the implications that the strategy of clinical governance holds for the speciality of infection control, emphasizing the benefits its active adoption can bring and highlighting the key relevance of clinical risk management in this setting. It illustrates clinical governance as a tool to engage colleagues on a multi-disciplinary front, most particularly the crucial link to senior Trust management.

Quality control of human tissues--experience from the Indiana University Cancer Center-Lilly Research Labs human tissue bank.

PubMed

Sandusky, George E; Teheny, Katie Heinz; Esterman, Mike; Hanson, Jeff; Williams, Stephen D

2007-01-01

The success of molecular research and its applications in both the clinical and basic research arenas is strongly dependent on the collection, handling, storage, and quality control of fresh human tissue samples. This tissue bank was set up to bank fresh surgically obtained human tissue using a Clinical Annotated Tissue Database (CATD) in order to capture the associated patient clinical data and demographics using a one way patient encryption scheme to protect patient identification. In this study, we determined that high quality of tissue samples is imperative for both genomic and proteomic molecular research. This paper also contains a brief compilation of the literature involved in the patient ethics, patient informed consent, patient de-identification, tissue collection, processing, and storage as well as basic molecular research generated from the tissue bank using good clinical practices. The current applicable rules, regulations, and guidelines for handling human tissues are briefly discussed. More than 6,610 cancer patients have been consented (97% of those that were contacted by the consenter) and 16,800 tissue specimens have been banked from these patients in 9 years. All samples collected in the bank were QC'd by a pathologist. Approximately 1,550 tissue samples have been requested for use in basic, clinical, and/or biomarker cancer research studies. Each tissue aliquot removed from the bank for a research study were evaluated by a second H&E, if the samples passed the QC, they were submitted for genomic and proteomic molecular analysis/study. Approximately 75% of samples evaluated were of high histologic quality and used for research studies. Since 2003, we changed the patient informed consent to allow the tissue bank to gather more patient clinical follow-up information. Ninety two percent of the patients (1,865 patients) signed the new informed consent form and agreed to be re-contacted for follow-up information on their disease state. In addition, eighty five percent of patients (1,584) agreed to be re-contacted to provide a biological fluid sample to be used for biomarker research.

Synthesis of the unmanned aerial vehicle remote control augmentation system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tomczyk, Andrzej, E-mail: A.Tomczyk@prz.edu.pl

Medium size Unmanned Aerial Vehicle (UAV) usually flies as an autonomous aircraft including automatic take-off and landing phases. However in the case of the on-board control system failure, the remote steering is using as an emergency procedure. In this reason, remote manual control of unmanned aerial vehicle is used more often during take-of and landing phases. Depends on UAV take-off mass and speed (total energy) the potential crash can be very danger for airplane and environment. So, handling qualities of UAV is important from pilot-operator point of view. In many cases the dynamic properties of remote controlling UAV are notmore » suitable for obtaining the desired properties of the handling qualities. In this case the control augmentation system (CAS) should be applied. Because the potential failure of the on-board control system, the better solution is that the CAS algorithms are placed on the ground station computers. The method of UAV handling qualities shaping in the case of basic control system failure is presented in this paper. The main idea of this method is that UAV reaction on the operator steering signals should be similar - almost the same - as reaction of the 'ideal' remote control aircraft. The model following method was used for controller parameters calculations. The numerical example concerns the medium size MP-02A UAV applied as an aerial observer system.« less

Basic design principles of colorimetric vision systems

NASA Astrophysics Data System (ADS)

Mumzhiu, Alex M.

1998-10-01

Color measurement is an important part of overall production quality control in textile, coating, plastics, food, paper and other industries. The color measurement instruments such as colorimeters and spectrophotometers, used for production quality control have many limitations. In many applications they cannot be used for a variety of reasons and have to be replaced with human operators. Machine vision has great potential for color measurement. The components for color machine vision systems, such as broadcast quality 3-CCD cameras, fast and inexpensive PCI frame grabbers, and sophisticated image processing software packages are available. However the machine vision industry has only started to approach the color domain. The few color machine vision systems on the market, produced by the largest machine vision manufacturers have very limited capabilities. A lack of understanding that a vision based color measurement system could fail if it ignores the basic principles of colorimetry is the main reason for the slow progress of color vision systems. the purpose of this paper is to clarify how color measurement principles have to be applied to vision systems and how the electro-optical design features of colorimeters have to be modified in order to implement them for vision systems. The subject of this presentation far exceeds the limitations of a journal paper so only the most important aspects will be discussed. An overview of the major areas of applications for colorimetric vision system will be discussed. Finally, the reasons why some customers are happy with their vision systems and some are not will be analyzed.

N-glycan based ER molecular chaperone and protein quality control system: the calnexin binding cycle

PubMed Central

Lamriben, Lydia; Graham, Jill B.; Adams, Benjamin M.; Hebert, Daniel N.

2015-01-01

Helenius and colleagues proposed over twenty-years ago a paradigm-shifting model for how chaperone binding in the endoplasmic reticulum was mediated and controlled for a new type of molecular chaperone- the carbohydrate binding chaperones, calnexin and calreticulin. While the originally established basics for this lectin chaperone binding cycle holds true today, there has been a number of important advances that have expanded our understanding of its mechanisms of action, role in protein homeostasis, and its connection to disease states that are highlighted in this review. PMID:26676362

Synthesis and structure of synthetically pure and deuterated amorphous (basic) calcium carbonates

DOE PAGES

Wang, Hsiu-Wen; Daemen, Luke L.; Cheshire, Michael C.; ...

2017-02-17

It is generally believed that H 2O and OH - are the key species stabilizing and controlling amorphous calcium carbonate “polyamorph” forms, and may in turn control the ultimate crystallization products during synthesis and in natural systems. Yet, the locations and hydrogen-bonding network of these species in ACC have never been measured directly using neutron diffraction. In this paper, we report a synthesis route that overcomes the existing challenges with respect to yield quantities and deuteration, both of which are critically necessary for high quality neutron studies.

Toward Higher QA: From Parametric Release of Sterile Parenteral Products to PAT for Other Pharmaceutical Dosage Forms.

PubMed

Hock, Sia Chong; Constance, Neo Xue Rui; Wah, Chan Lai

2012-01-01

Pharmaceutical products are generally subjected to end-product batch testing as a means of quality control. Due to the inherent limitations of conventional batch testing, this is not the most ideal approach for determining the pharmaceutical quality of the finished dosage form. In the case of terminally sterilized parenteral products, the limitations of conventional batch testing have been successfully addressed with the application of parametric release (the release of a product based on control of process parameters instead of batch sterility testing at the end of the manufacturing process). Consequently, there has been an increasing interest in applying parametric release to other pharmaceutical dosage forms, beyond terminally sterilized parenteral products. For parametric release to be possible, manufacturers must be capable of designing quality into the product, monitoring the manufacturing processes, and controlling the quality of intermediates and finished products in real-time. Process analytical technology (PAT) has been thought to be capable of contributing to these prerequisites. It is believed that the appropriate use of PAT tools can eventually lead to the possibility of real-time release of other pharmaceutical dosage forms, by-passing the need for end-product batch testing. Hence, this literature review attempts to present the basic principles of PAT, introduce the various PAT tools that are currently available, present their recent applications to pharmaceutical processing, and explain the potential benefits that PAT can bring to conventional ways of processing and quality assurance of pharmaceutical products. Last but not least, current regulations governing the use of PAT and the manufacturing challenges associated with PAT implementation are also discussed. Pharmaceutical products are generally subjected to end-product batch testing as a means of quality control. Due to the inherent limitations of conventional batch testing, this is not the most ideal approach. In the case of terminally sterilized parenteral products, these limitations have been successfully addressed with the application of parametric release (the release of a product based on control of process parameters instead of batch sterility testing at the end of the manufacturing process). Consequently, there has been an increasing interest in applying parametric release to other pharmaceutical dosage forms. With the advancement of process analytical technology (PAT), it is possible to monitor the manufacturing processes closely. This will eventually enable quality control of the intermediates and finished products, and thus their release in real-time. Hence, this literature review attempts to present the basic principles of PAT, introduce the various PAT tools that are currently available, present their recent applications to pharmaceutical processing, and explain the potential benefits that PAT can bring to conventional ways of processing and quality assurance of pharmaceutical products. It will also discuss the current regulations governing the use of PAT and the manufacturing challenges associated with the implementation of PAT.

Radiation therapy and internet - what can patients expect? homepage analysis of german radiotherapy institutions.

PubMed

Janssen, Stefan; Meyer, Andreas; Vordermark, Dirk; Steinmann, Diana

2010-12-01

the internet as a source of medical information has emerged during the last years. There is a confusing amount of medical websites with a great diversity of quality. Websites of radiotherapy institutions could offer a safe and an easy-to-control way to assist patients' requests. 205 internet appearances of German radiotherapy institutions were analyzed in June 2009 (nonuniversity hospitals n = 108, medical practices n = 62, university hospitals n = 35). For the evaluation of each homepage verifiable criteria concerning basic information, service and medical issues were used. the quality of information published via internet by different radiotherapy institutions showed a large variety. Basic information like telephone numbers, operating hours, and direction guidance were provided in 96.7%, 40%, and 50.7%, respectively. 85% of the websites introduced the staff, 50.2% supplied photos and 14% further information on the attending physicians. The mean amount of continuative links to other websites was 5.4, the mean amount of articles supplying medical information for patients summed up to 4.6. Medical practices and university hospitals had statistically significant more informative articles and links to other websites than nonuniversity hospitals. No statistically significant differences could be found in most other categories like service issues and basic information. internet presences of radiotherapy institutions hold the chance to supply patients with professional and individualized medical information. While some websites are already using this opportunity, others show a lack of basic information or of user-friendliness.

Modeling, simulation, and flight characteristics of an aircraft designed to fly at 100,000 feet

NASA Technical Reports Server (NTRS)

Sim, Alex G.

1991-01-01

A manned real time simulation of a conceptual vehicle, the stratoplane, was developed to study the problems associated with the flight characteristics of a large, lightweight vehicle. Mathematical models of the aerodynamics, mass properties, and propulsion system were developed in support of the simulation and are presented. The simulation was at first conducted without control augmentation to determine the needs for a control system. The unaugmented flying qualities were dominated by lightly damped dutch roll oscillations. Constant pilot workloads were needed at high altitudes. Control augmentation was studied using basic feedbacks. For the longitudinal axis, flight path angle, and pitch rate feedback were sufficient to damp the phugoid mode and to provide good flying qualities. In the lateral directional axis, bank angle, roll rate, and yaw rate feedbacks were sufficient to provide a safe vehicle with acceptable handling qualities. Intentionally stalling the stratoplane to very high angles of attack (deep stall) was studied as a means of enable safe and rapid descent. It was concluded that the deep stall maneuver is viable for this class of vehicle.

Chemical composition, starch digestibility and antioxidant capacity of tortilla made with a blend of quality protein maize and black bean.

PubMed

Grajales-García, Eva M; Osorio-Díaz, Perla; Goñi, Isabel; Hervert-Hernández, Deisy; Guzmán-Maldonado, Salvador H; Bello-Pérez, Luis A

2012-01-01

Tortilla and beans are the basic components in the diet of people in the urban and rural areas of Mexico. Quality protein maize is suggested for tortilla preparation because it presents an increase in lysine and tryptophan levels. Beans contain important amounts of dietary fiber. The objective of this study was to prepare tortilla with bean and assesses the chemical composition, starch digestibility and antioxidant capacity using a quality protein maize variety. Tortilla with bean had higher protein, ash, dietary fiber and resistant starch content, and lower digestible starch than control tortilla. The hydrolysis rate (60 to 50%) and the predicted glycemic index (88 to 80) of tortilla decreased with the addition of bean in the blend. Extractable polyphenols and proanthocyanidins were higher in the tortilla with bean than control tortilla. This pattern produced higher antioxidant capacity of tortilla with bean (17.6 μmol Trolox eq/g) than control tortilla (7.8 μmol Trolox eq/g). The addition of bean to tortilla modified the starch digestibility and antioxidant characteristics of tortilla, obtaining a product with nutraceutical characteristics.

Evaluation of flow quality in two large NASA wind tunnels at transonic speeds

NASA Technical Reports Server (NTRS)

Harvey, W. D.; Stainback, P. C.; Owen, F. K.

1980-01-01

Wind tunnel testing of low drag airfoils and basic transition studies at transonic speeds are designed to provide high quality aerodynamic data at high Reynolds numbers. This requires that the flow quality in facilities used for such research be excellent. To obtain a better understanding of the characteristics of facility disturbances and identification of their sources for possible facility modification, detailed flow quality measurements were made in two prospective NASA wind tunnels. Experimental results are presented of an extensive and systematic flow quality study of the settling chamber, test section, and diffuser in the Langley 8 foot transonic pressure tunnel and the Ames 12 foot pressure wind tunnel. Results indicate that the free stream velocity and pressure fluctuation levels in both facilities are low at subsonic speeds and are so high as to make it difficult to conduct meaningful boundary layer control and transition studies at transonic speeds.

Exercise Effects for Children With Autism Spectrum Disorder: Metabolic Health, Autistic Traits, and Quality of Life.

PubMed

Toscano, Chrystiane V A; Carvalho, Humberto M; Ferreira, José P

2018-02-01

This study examined the effects of a 48-week exercise-based intervention on the metabolic profile, autism traits, and perceived quality of life in children with autism spectrum disorder (ASD). We randomly allocated 64 children with ASD (aged 6-12 years) to experimental ( n = 46) and control groups ( n = 18) and used multilevel regression modeling to examine responses to receiving or not receiving the intervention. The experimental group showed beneficial effects on metabolic indicators (high-density lipoprotein cholesterol, low-density lipoprotein cholesterol, and total cholesterol), autism traits, and parent-perceived quality of life. Our results provide support for exercise and physical activity, including basic coordination and strength exercises, as important therapeutic interventions for children with ASD.

Electronic test instrumentation and techniques: A compilation

NASA Technical Reports Server (NTRS)

1974-01-01

The uses of test equipment and techniques used in space research and development programs are discussed. Modifications and adaptations to enlarge the scope of usefulness or divert the basic uses to alternate applications are analyzed. The items of equipment which have been of benefit to professional personnel in the enlargement and improvement of quality control capabilities are identified. Items which have been simplified or made more accurate in conducting measurements are described.

Logistics and Sampling Plan for Task 2: 1979-1980 IRS Comparison Study. Quality Control Analysis of Selected Aspects of Programs Administered by the Bureau of Student Financial Assistance.

ERIC Educational Resources Information Center

Walker, Gail; Kuchak, JoAnn

The type, number, and scope of errors on Basic Educational Opportunity Grant (BEOG) program applications were estimated in a replication of a 1976-1977 Internal Revenue Service (IRS) Comparison Study. Information reported on BEOG applicants and IRS income tax returns was compared for various categories of applicants. The study provides information…

Handling Qualities Evaluations of Low Complexity Model Reference Adaptive Controllers for Reduced Pitch and Roll Damping Scenarios

NASA Technical Reports Server (NTRS)

Hanson, Curt; Schaefer, Jacob; Burken, John J.; Johnson, Marcus; Nguyen, Nhan

2011-01-01

National Aeronautics and Space Administration (NASA) researchers have conducted a series of flight experiments designed to study the effects of varying levels of adaptive controller complexity on the performance and handling qualities of an aircraft under various simulated failure or damage conditions. A baseline, nonlinear dynamic inversion controller was augmented with three variations of a model reference adaptive control design. The simplest design consisted of a single adaptive parameter in each of the pitch and roll axes computed using a basic gradient-based update law. A second design was built upon the first by increasing the complexity of the update law. The third and most complex design added an additional adaptive parameter to each axis. Flight tests were conducted using NASA s Full-scale Advanced Systems Testbed, a highly modified F-18 aircraft that contains a research flight control system capable of housing advanced flight controls experiments. Each controller was evaluated against a suite of simulated failures and damage ranging from destabilization of the pitch and roll axes to significant coupling between the axes. Two pilots evaluated the three adaptive controllers as well as the non-adaptive baseline controller in a variety of dynamic maneuvers and precision flying tasks designed to uncover potential deficiencies in the handling qualities of the aircraft, and adverse interactions between the pilot and the adaptive controllers. The work was completed as part of the Integrated Resilient Aircraft Control Project under NASA s Aviation Safety Program.

A pragmatic guide on how physicians can take over financial control of their clinical practice.

PubMed

Jacobs, Volker R; Fischer, Thorsten

2012-01-01

Control of clinical cost is becoming increasingly important in health care worldwide. Physicians should accept the limitation of resources and take responsibility to improve their clinical cost-reimbursement ratio. To achieve this, they will need basic education in clinic management to control and adjust costs and reimbursement, without impacting professional quality of care. Rational use of diagnostics and therapy should be implemented and frequently verified. Physicians are the only professionals that are able to integrate economics with health care. This is in the best interest of patients and will improve a physician's position, influence, and professional freedom levels within our hospitals.

WHO Expert Committee on Specifications for Pharmaceutical Preparations.

PubMed

2003-01-01

This report presents the recommendations of an international group of experts convened by the World Health Organization to consider matters concerning the quality assurance of pharmaceuticals and specifications for drug substances and dosage forms. Of particular relevance to drug regulatory authorities and pharmaceutical manufacturers, the report discusses activities related to the development of The International Pharmacopoeia and basic tests for pharmaceutical substances and dosage forms, as well as quality control of reference materials, good manufacturing practices (GMP), stability studies, inspection, hazard analysis, procurement, storage and other aspects of quality assurance of pharmaceuticals, and regulatory issues. The report is complemented by a number of annexes, including recommendations on the risk of transmitting animal spongiform encephalopathy agents via medicinal products, guidelines on GMP for pharmaceutical products, a model certificate for GMP and guidance on a GMP inspection report. The final annexes provide guidance on the application of Hazard Analysis and Critical Control Point (HACCP) method to pharmaceuticals, good storage practices and a procedure for assessing acceptability of pharmaceutical products for purchase by United Nations agencies.

[The Contribution of GMP-grade Hospital Preparation to Translational Research].

PubMed

Yonezawa, Atsushi; Kajiwara, Moto; Minami, Ikuko; Omura, Tomohiro; Nakagawa, Shunsaku; Matsubara, Kazuo

2015-01-01

Translational research is important for applying the outcomes of basic research studies to practical medical treatments. In exploratory early-phase clinical trials for an innovative therapy, researchers should generally manufacture investigational agents by themselves. To provide investigational agents with safety and high quality in clinical studies, appropriate production management and quality control are essential. In the Department of Pharmacy of Kyoto University Hospital, a manufacturing facility for sterile drugs was established, independent of existing manufacturing facilities. Manuals on production management and quality control were developed according to Good Manufacturing Practices (GMP) for Investigational New Drugs (INDs). Advanced clinical research has been carried out using investigational agents manufactured in our facility. These achievements contribute to both the safety of patients and the reliability of clinical studies. In addition, we are able to do licensing-out of our technique for the manufacture of investigational drugs. In this symposium, we will introduce our GMP grade manufacturing facility for sterile drugs and discuss the role of GMP grade hospital preparation in translational research.

Primary Teacher's Perceptions of Classroom Assessment Practices as Means of Providing Quality Primary/Basic Education by Botswana and Nigeria

ERIC Educational Resources Information Center

Nenty, H. J.; Adedoyin, O. O.; Odili, John N.; Major, T. E.

2007-01-01

More than any other of its aspects, assessment plays a central role in determining the quality of education. Quality of primary/basic education (QoE) can be viewed as the extent to which the process of education at the primary education level maximizes desirable outcomes in terms of cognitive, affective and psychomotor behaviour of the learners.…

Controlled low strength materials (CLSM), reported by ACI Committee 229

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rajendran, N.

1997-07-01

Controlled low-strength material (CLSM) is a self-compacted, cementitious material used primarily as a backfill in lieu of compacted fill. Many terms are currently used to describe this material including flowable fill, unshrinkable fill, controlled density fill, flowable mortar, flowable fly ash, fly ash slurry, plastic soil-cement, soil-cement slurry, K-Krete and other various names. This report contains information on applications, material properties, mix proportioning, construction and quality-control procedures. This report`s intent is to provide basic information on CLSM technology, with emphasis on CLSM material characteristics and advantages over conventional compacted fill. Applications include backfills, structural fills, insulating and isolation fills, pavementmore » bases, conduit bedding, erosion control, void filling, and radioactive waste management.« less

Quality Inspection and Analysis of Three-Dimensional Geographic Information Model Based on Oblique Photogrammetry

NASA Astrophysics Data System (ADS)

Dong, S.; Yan, Q.; Xu, Y.; Bai, J.

2018-04-01

In order to promote the construction of digital geo-spatial framework in China and accelerate the construction of informatization mapping system, three-dimensional geographic information model emerged. The three-dimensional geographic information model based on oblique photogrammetry technology has higher accuracy, shorter period and lower cost than traditional methods, and can more directly reflect the elevation, position and appearance of the features. At this stage, the technology of producing three-dimensional geographic information models based on oblique photogrammetry technology is rapidly developing. The market demand and model results have been emerged in a large amount, and the related quality inspection needs are also getting larger and larger. Through the study of relevant literature, it is found that there are a lot of researches on the basic principles and technical characteristics of this technology, and relatively few studies on quality inspection and analysis. On the basis of summarizing the basic principle and technical characteristics of oblique photogrammetry technology, this paper introduces the inspection contents and inspection methods of three-dimensional geographic information model based on oblique photogrammetry technology. Combined with the actual inspection work, this paper summarizes the quality problems of three-dimensional geographic information model based on oblique photogrammetry technology, analyzes the causes of the problems and puts forward the quality control measures. It provides technical guidance for the quality inspection of three-dimensional geographic information model data products based on oblique photogrammetry technology in China and provides technical support for the vigorous development of three-dimensional geographic information model based on oblique photogrammetry technology.

Bench to bedside: the quest for quality in experimental stroke research.

PubMed

Dirnagl, Ulrich

2006-12-01

Over the past decades, great progress has been made in clinical as well as experimental stroke research. Disappointingly, however, hundreds of clinical trials testing neuroprotective agents have failed despite efficacy in experimental models. Recently, several systematic reviews have exposed a number of important deficits in the quality of preclinical stroke research. Many of the issues raised in these reviews are not specific to experimental stroke research, but apply to studies of animal models of disease in general. It is the aim of this article to review some quality-related sources of bias with a particular focus on experimental stroke research. Weaknesses discussed include, among others, low statistical power and hence reproducibility, defects in statistical analysis, lack of blinding and randomization, lack of quality-control mechanisms, deficiencies in reporting, and negative publication bias. Although quantitative evidence for quality problems at present is restricted to preclinical stroke research, to spur discussion and in the hope that they will be exposed to meta-analysis in the near future, I have also included some quality-related sources of bias, which have not been systematically studied. Importantly, these may be also relevant to mechanism-driven basic stroke research. I propose that by a number of rather simple measures reproducibility of experimental results, as well as the step from bench to bedside in stroke research may be made more successful. However, the ultimate proof for this has to await successful phase III stroke trials, which were built on basic research conforming to the criteria as put forward in this article.

Quality DOTS management and empowering tuberculosis patients.

PubMed

Chugh, Satish

2009-03-01

Central Tuberculosis Division (CTD) has covered whole of India under DOTS. IMA is a proud partner of RNTCP which is managed by CTD. International Standards for Tuberculosis Care is expected from all healthcare providers. The basic principles of care is same worldwide. IMA GFATM RNTCP PPM is completing 2 years of its inception. Sensitisation programme and district training programmes has yielded DOTS/DMC centres in the target states. IMA is having 100% commitment for containing tuberculosis in India. There are International Standards for quality management in tuberculosis control, some of the Standards are elaborated in this write-up. In the Indian context, DOTS needs some innovations that is discussed in this article.

Internationalization of traditional Chinese medicine: current international market, internationalization challenges and prospective suggestions.

PubMed

Lin, Annie Xianghong; Chan, Ging; Hu, Yuanjia; Ouyang, Defang; Ung, Carolina Oi Lam; Shi, Luwen; Hu, Hao

2018-01-01

Through reviewing the current international market for traditional Chinese medicine (TCM), this paper identified the internationalization challenges for TCM, including unclear therapeutic material basis and mechanism, difficulty of quality control, low preparation level, registration/policy barriers, and shortage of intellectual property. To deal with these challenges, suggestions were given including: (1) product innovation of TCM (study the TCM by using the methods and means of western medicine; innovate the basic theory of TCM; develop TCM health product); (2) standard innovation of TCM; (3) building big data platform of Chinese medicine (big data platform of TCM preparation; big data platform on the quality of TCM).

[Association between mothers' quality of life and infants' nutritional status].

PubMed

Feijó, Fernanda de Matos; Carraro, Deborah Filippini; Cuervo, Maria Rita Macedo; Hagen, Martine Elisabeth Kienzle; Spiandorello, Wilson Paloschi; Pizzato, Alessandra Campani

2011-12-01

Determine associations between the quality of life of mothers and the nutritional status of children. case-control study involving 152 mothers of children aged zero to five years, living in the coverage area of a basic health unit in the city of Porto Alegre. The calculation of sample size was estimated as 152 mothers - 76 mothers with children at nutritional risk/malnutrition (cases) and 76 mothers with eutrophic children (controls). Information was collected regarding the quality of life of mothers, measured by the instrument of the World Health Organization, and the association between maternal quality of life and nutritional status of children was examined. In relation to the psychiatric realm, for each eutrophic child whose mother has lower quality of life there is a chance of 5.4 children at nutritional risk/malnutrition with mothers in the same condition. In the environmental field, for each eutrophic child whose mother has lower quality of life there is a chance of 2.9 children at nutritional risk/malnutrition with mothers in the same condition. Regarding educational level, for each eutrophic child whose mother has lower quality of life there is a chance of 4.2 children at nutritional risk/malnutrition with mothers in the same condition. Mothers' low quality of life was associated with an infant in nutritional risk/malnutrition and may be a risk factor for the nutritional status of children.

Quality Control of Meteorological Observations

NASA Technical Reports Server (NTRS)

Collins, William; Dee, Dick; Rukhovets, Leonid

1999-01-01

For the first time, a problem of the meteorological observation quality control (QC) was formulated by L.S. Gandin at the Main Geophysical Observatory in the 70's. Later in 1988 L.S. Gandin began adapting his ideas in complex quality control (CQC) to the operational environment at the National Centers for Environmental Prediction. The CQC was first applied by L.S.Gandin and his colleagues to detection and correction of errors in rawinsonde heights and temperatures using a complex of hydrostatic residuals.Later, a full complex of residuals, vertical and horizontal optimal interpolations and baseline checks were added for the checking and correction of a wide range of meteorological variables. some other of Gandin's ideas were applied and substantially developed at other meteorological centers. A new statistical QC was recently implemented in the Goddard Data Assimilation System. The central component of any quality control is a buddy check which is a test of individual suspect observations against available nearby non-suspect observations. A novel feature of this test is that the error variances which are used for QC decision are re-estimated on-line. As a result, the allowed tolerances for suspect observations can depend on local atmospheric conditions. The system is then better able to accept extreme values observed in deep cyclones, jet streams and so on. The basic statements of this adaptive buddy check are described. Some results of the on-line QC including moisture QC are presented.

Laser-driven electron beam and radiation sources for basic, medical and industrial sciences.

PubMed

Nakajima, Kazuhisa

2015-01-01

To date active research on laser-driven plasma-based accelerators have achieved great progress on production of high-energy, high-quality electron and photon beams in a compact scale. Such laser plasma accelerators have been envisaged bringing a wide range of applications in basic, medical and industrial sciences. Here inheriting the groundbreaker's review article on "Laser Acceleration and its future" [Toshiki Tajima, (2010)],(1)) we would like to review recent progress of producing such electron beams due to relativistic laser-plasma interactions followed by laser wakefield acceleration and lead to the scaling formulas that are useful to design laser plasma accelerators with controllability of beam energy and charge. Lastly specific examples of such laser-driven electron/photon beam sources are illustrated.

Development of the quality control system of the readout electronics for the large size telescope of the Cherenkov Telescope Array observatory

NASA Astrophysics Data System (ADS)

Konno, Y.; Kubo, H.; Masuda, S.; Paoletti, R.; Poulios, S.; Rugliancich, A.; Saito, T.

2016-07-01

The Cherenkov Telescope Array (CTA) is the next generation VHE γ-ray observatory which will improve the currently available sensitivity by a factor of 10 in the range 100 GeV to 10 TeV. The array consists of different types of telescopes, called large size telescope (LST), medium size telescope (MST) and small size telescope (SST). A LST prototype is currently being built and will be installed at the Observatorio Roque de los Muchachos, island of La Palma, Canary islands, Spain. The readout system for the LST prototype has been designed and around 300 readout boards will be produced in the coming months. In this note we describe an automated quality control system able to measure basic performance parameters and quickly identify faulty boards.

Understanding biomaterial-tissue interface quality: combined in vitro evaluation

PubMed Central

Gasik, Michael

2017-01-01

Abstract One of the greatest challenges in the development of new medical products and devices remains in providing maximal patient safety, efficacy and suitability for the purpose. A ‘good quality’ of the tissue-implant interface is one of the most critical factors for the success of the implant integration. In this paper this challenge is being discussed from the point of view of basic stimuli combination to experimental testing. The focus is in particular on bacterial effects on tissue-implant interaction (for different materials). The demonstration of the experimental evaluation of the tissue-implant interface is for dental abutment with mucosal contact. This shows that testing of the interface quality could be the most relevant in controlled conditions, which mimic as possible the clinical applications, but consider variables being under the control of the evaluator. PMID:28970865

Study on the quality of FRP fishing vessel based on improved Fishbone Chart

NASA Astrophysics Data System (ADS)

Sui, J. H.; Yu, Y. F.; Du, Q. F.; Jiang, D. W.

2018-01-01

The construction quality of FRP fishing vessels influences their production, use and industry development. In order to explore the factors that affect the construction quality of FRP fishing vessels, key factors affecting the construction quality of FRP fishing vessels are determined based on the quality problems of FRP fishing vessels constructed. The improved Fishbone Chart is used to analyze the eight factors of “human, machine, material, process, environment, inspection, design and information”. Taking the factors that affect the construction quality of FRP fishing vessels as the central target, the eight influencing factors were condensed into five aspects and a composite Fishbone Chart is drawn. The Fishbone Chart is used as the basic model, the influencing factors are sorted, screened and discriminated, and the system model convenient for construction site management and control is established. Finally, the causes of poor construction of FRP fishing vessels are analyzed and discussed, and relevant suggestions are put forward.

Significant improvement of the quality of bystander first aid using an expert system with a mobile multimedia device.

PubMed

Ertl, Lorenz; Christ, Frank

2007-08-01

Better quality bystander first-aid could improve outcome rates for emergency victims significantly. In this case-control study, we hypothesised that expert knowledge presented step-by-step to untrained helpers using a personal digital assistant (PDA), would improve the quality of bystanders basic life support. We confronted 101 lay-helpers with two standard emergency situations. (1) An unconscious trauma victim with severe bleeding. (2) Cardiopulmonary resuscitation (CPR). Performance was assessed using an Objective Structured Clinical Examination (OSCE). One group was supported by a PDA providing visual and audio instructions, whereas the control group acted only with their current knowledge. The expert system was programmed in HTML-code and displayed on the PDA's Internet browser. The maximum score obtainable was 24 points corresponding to optimal treatment. The control group without the PDA reached 14.8+/-3.5 (mean value+/-standard deviation), whereas the PDA supported group scored significantly higher (21.9+/-2.7, p<0.01). The difference in performance was measurable in all criteria tested and particularly notable in the items: placing in recovery position, airway management and quality of CPR. The PDA based expert system increased the performance of untrained helpers supplying emergency care significantly. Since Internet compatible mobile devices have become widely available, a significant quality improvement in bystander first-aid seems possible.

Power quality improvement by using STATCOM control scheme in wind energy generation interface to grid

NASA Astrophysics Data System (ADS)

Kirmani, Sheeraz; Kumar, Brijesh

2018-01-01

“Electric Power Quality (EPQ) is a term that refers to maintaining the near sinusoidal waveform of power distribution bus voltages and currents at rated magnitude and frequency”. Today customers are more aware of the seriousness that the power quality possesses, this prompt the utilities to assure good quality of power to their customer. The power quality is basically customer centric. Increased focus of utilities toward maintaining reliable power supply by employing power quality improvement tools has reduced the power outages and black out considerably. Good power quality is the characteristic of reliable power supply. Low power factor, harmonic pollution, load imbalance, fast voltage variations are some common parameters which are used to define the power quality. If the power quality issues are not checked i.e. the parameters that define power quality doesn't fall within the predefined standards than it will lead into high electricity bill, high running cost in industries, malfunctioning of equipments, challenges in connecting renewable. Capacitor banks, FACTS devices, harmonic filters, SVC’s (static voltage compensators), STATCOM (Static-Compensator) are the solutions to achieve the power quality. The performance of Wind turbine generators is affected by poor quality power, at the same time these wind power generating plant affects the power quality negatively. This paper presents the STATCOM-BESS (battery energy storage system) system and studies its impact on the power quality in a system which consists of wind turbine generator, non linear load, hysteresis controller for controlling the operation of STATCOM and grid. The model is simulated in the MATLAB/Simulink. This scheme mitigates the power quality issues, improves voltage profile and also reduces harmonic distortion of the waveforms. BESS level out the imbalances caused in real power due to intermittent nature of wind power available due to varying wind speeds.

32 CFR 761.7 - Basic controls.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 5 2013-07-01 2013-07-01 false Basic controls. 761.7 Section 761.7 National... OF THE PACIFIC ISLANDS Criteria and Basic Controls § 761.7 Basic controls. (a) General. Except for such persons, ship, or aircraft as are issued an authorization to enter by an Entry Control Commander...

32 CFR 761.7 - Basic controls.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 5 2011-07-01 2011-07-01 false Basic controls. 761.7 Section 761.7 National... OF THE PACIFIC ISLANDS Criteria and Basic Controls § 761.7 Basic controls. (a) General. Except for such persons, ship, or aircraft as are issued an authorization to enter by an Entry Control Commander...

32 CFR 761.7 - Basic controls.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Basic controls. 761.7 Section 761.7 National... OF THE PACIFIC ISLANDS Criteria and Basic Controls § 761.7 Basic controls. (a) General. Except for such persons, ship, or aircraft as are issued an authorization to enter by an Entry Control Commander...

International Aviation (Selected Articles).

DTIC Science & Technology

1982-04-12

and advanced quality control. ,onclusions 10 ____ -c ’~-, nznu i’’ hrm ,~ :~~r i f aviation rcli~cts and ral-eLn -ecr 7conomld ethe’ :’orlnnzs and...have basically attained or approached .he level of foreign countries. The successful development of directional conden- sation technique means that...attenuation, softness , and light weight in addition to an advantage that no metal reflection lining is required. Once such materials are developed, radar

Associations Between Motivation and Mental Health in Sport: A Test of the Hierarchical Model of Intrinsic and Extrinsic Motivation

PubMed Central

Sheehan, Rachel B.; Herring, Matthew P.; Campbell, Mark J.

2018-01-01

Motivation has been the subject of much research in the sport psychology literature, whereas athlete mental health has received limited attention. Motivational complexities in elite sport are somewhat reflected in the mental health literature, where there is evidence for both protective and risk factors for athletes. Notably, few studies have linked motivation to mental health. Therefore, the key objective of this study was to test four mental health outcomes in the motivational sequence posited by the Hierarchical Model of Intrinsic and Extrinsic Motivation: motivational climate → basic psychological needs → motivation → mental health outcomes. Elite team-sport athletes (140 females, 75 males) completed seven psychometric inventories of motivation-related and mental health variables. Overall, the athletes reported positive motivational patterns, with autonomous motivation and task climate being more prevalent than their less adaptive counterparts. Elevated depressive symptoms and poor sleep quality affected nearly half of the cohort. Structural equation modeling supported pathways between motivational climate, basic needs, motivation, and mood, depressive symptoms, sleep quality, and trait anxiety. Specifically, a task climate was positively associated with the three basic psychological needs, and an ego climate was positively associated with competence. Autonomy and relatedness had positive and negative associations with autonomous and controlled forms of motivation, respectively. Controlled motivation regulations were positively associated with the four mental health outcomes. Integrated regulation had a negative association with anxiety, and intrinsic regulation had a positive association with depressive symptoms. These findings highlight the complexities of and interrelations between motivation and mental health among athletes, and support the importance of considering mental health as an outcome of motivation. PMID:29867672

Associations Between Motivation and Mental Health in Sport: A Test of the Hierarchical Model of Intrinsic and Extrinsic Motivation.

PubMed

Sheehan, Rachel B; Herring, Matthew P; Campbell, Mark J

2018-01-01

Motivation has been the subject of much research in the sport psychology literature, whereas athlete mental health has received limited attention. Motivational complexities in elite sport are somewhat reflected in the mental health literature, where there is evidence for both protective and risk factors for athletes. Notably, few studies have linked motivation to mental health. Therefore, the key objective of this study was to test four mental health outcomes in the motivational sequence posited by the Hierarchical Model of Intrinsic and Extrinsic Motivation: motivational climate → basic psychological needs → motivation → mental health outcomes. Elite team-sport athletes (140 females, 75 males) completed seven psychometric inventories of motivation-related and mental health variables. Overall, the athletes reported positive motivational patterns, with autonomous motivation and task climate being more prevalent than their less adaptive counterparts. Elevated depressive symptoms and poor sleep quality affected nearly half of the cohort. Structural equation modeling supported pathways between motivational climate, basic needs, motivation, and mood, depressive symptoms, sleep quality, and trait anxiety. Specifically, a task climate was positively associated with the three basic psychological needs, and an ego climate was positively associated with competence. Autonomy and relatedness had positive and negative associations with autonomous and controlled forms of motivation, respectively. Controlled motivation regulations were positively associated with the four mental health outcomes. Integrated regulation had a negative association with anxiety, and intrinsic regulation had a positive association with depressive symptoms. These findings highlight the complexities of and interrelations between motivation and mental health among athletes, and support the importance of considering mental health as an outcome of motivation.

[Witch hunt and hypotheses loss].

PubMed

Köhler, Dieter

2015-12-01

At this time randomized controlled studies (RCT) in clinical trials usually have high quality. But this quality is only true for the included patients (intrinsic validity). It is common to generalize the results to more or less similar patients. This inductive method is prohibited in epistemology what is known for 250 years (D Hume, K R Popper). Therefore the external validity for the data of RCT is low. To solve this problem additional clinical and pathophysiological based data are necessary to generalize the results. Unfortunately RCT show less quality in their premises. This is partly due to the influence of the pharmaceutical industry. A loss of universality of the hypothesis for RCT decreases basically the extrinsic validity. The articles describe this problem with examples. © Georg Thieme Verlag KG Stuttgart · New York.

TH-A-16A-01: Image Quality for the Radiation Oncology Physicist: Review of the Fundamentals and Implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seibert, J; Imbergamo, P

The expansion and integration of diagnostic imaging technologies such as On Board Imaging (OBI) and Cone Beam Computed Tomography (CBCT) into radiation oncology has required radiation oncology physicists to be responsible for and become familiar with assessing image quality. Unfortunately many radiation oncology physicists have had little or no training or experience in measuring and assessing image quality. Many physicists have turned to automated QA analysis software without having a fundamental understanding of image quality measures. This session will review the basic image quality measures of imaging technologies used in the radiation oncology clinic, such as low contrast resolution, highmore » contrast resolution, uniformity, noise, and contrast scale, and how to measure and assess them in a meaningful way. Additionally a discussion of the implementation of an image quality assurance program in compliance with Task Group recommendations will be presented along with the advantages and disadvantages of automated analysis methods. Learning Objectives: Review and understanding of the fundamentals of image quality. Review and understanding of the basic image quality measures of imaging modalities used in the radiation oncology clinic. Understand how to implement an image quality assurance program and to assess basic image quality measures in a meaningful way.« less

Basic Skills: Quality Education Program Study. Booklet 3 (Description) and Booklet 3A (Needs Assessment).

ERIC Educational Resources Information Center

Bucks County Public Schools, Doylestown, PA.

Categories of effective and ineffective behavior in regard to Goal Three of the Quality Education Program (regarding basic skills) are listed. Both the rationales for areas of effective student behavior and the categories of teacher strategies are also included. (See TM 001 375 for project description.) (MS)

Examining Some Aspects of Alternative Basic Education Programmes in Ethiopia

ERIC Educational Resources Information Center

Onwu, Gilbert O. M.; Agu, Augustine

2010-01-01

This study examines some aspects of the quality of Alternative Basic Education (ABE) provision in Ethiopia. Educational indicators of quality were formulated under two general topic areas of ABE programme process and content, and pupil learning outcomes. A qualitative-interpretative research approach and survey design was used to collect data from…

Generic Dimensions of Teaching Quality: The German Framework of Three Basic Dimensions

ERIC Educational Resources Information Center

Praetorius, Anna-Katharina; Klieme, Eckhard; Herbert, Benjamin; Pinger, Petra

2018-01-01

In this paper, we argue that classroom management, student support, and cognitive activation are generic aspects of classroom teaching, forming Three Basic Dimensions of teaching quality. The conceptual framework was developed in research on mathematics instruction but it is supposed to generalize across subjects. It is based on general theories…

Response to "Back to Basics"

ERIC Educational Resources Information Center

Jacques, Doug

2007-01-01

In this article, the author provides a response to Andrew McMartin's article "Back to Basics: Meditations on Quality vs. Quantity in Outdoor Education." In considering quality vs. quantity in outdoor education it is still important from the author's perspective to be conscious of one's viewpoint. He has taught and run trips from a survival…

Improving the Quality of Experience Journals: Training Educational Psychology Students in Basic Qualitative Methodology

ERIC Educational Resources Information Center

Reynolds-Keefer, Laura

2010-01-01

This study evaluates the impact of teaching basic qualitative methodology to preservice teachers enrolled in an educational psychology course in the quality of observation journals. Preservice teachers enrolled in an educational psychology course requiring 45 hr of field experience were given qualitative methodological training as a part of the…

Is gastroenterology research in decline? A comparison of abstract publication rates from The British Society of Gastroenterology meetings between 1995 and 2005.

PubMed

Prendergast, Sarah; Mattishent, Katharina; Broughton, Tom; Beales, Ian

2013-02-22

Reports have suggested that academic medicine may be in decline within the UK. Further evidence suggests that rates of subsequent full publication of abstracts presented at major scientific meetings are low and may be declining. We have compared the publication rates of abstracts presented at meetings of the British Society of Gastroenterology (BSG) between 1995 and 2005 and examined factors associated with full paper publication.  Abstracts presented at BSG meetings in 1995 and 2005 were assessed by cross-referencing with multiple databases. Abstract characteristics associated with publication were analysed. There were no differences in overall publication rates, impact factors or time to publication between 1995 and 2005. Overall, basic-science abstracts were twice as likely to achieve full publication than non-basic science. There was a significant fall in the publication rates for case series and audits, and significantly increased rates for fundamental/basic-science abstracts over the study period. There were non-significant increases in publication rates for controlled trials and systematic reviews. In general, publication rates for all predominantly clinically orientated abstracts reduced between the two periods with the most notable fall occurring in nutrition.  There was no evidence of a decline in overall abstract publication rates between 1995 and 2005. There seemed to be trend for increased publication rates of abstracts using perceived high-quality study methodologies with a corresponding decrease in those with lower quality methods. The proportion of basic-science abstracts is likely to be a determinant of overall full publication rates following scientific meetings.

Is gastroenterology research in decline? A comparison of abstract publication rates from The British Society of Gastroenterology meetings between 1995 and 2005.

PubMed

Prendergast, Sarah; Mattishent, Katharina; Broughton, Tom; Beales, Ian

2013-01-01

Background: Reports have suggested that academic medicine may be in decline within the UK. Further evidence suggests that rates of subsequent full publication of abstracts presented at major scientific meetings are low and may be declining. We have compared the publication rates of abstracts presented at meetings of the British Society of Gastroenterology (BSG) between 1995 and 2005 and examined factors associated with full paper publication.  Methods: Abstracts presented at BSG meetings in 1995 and 2005 were assessed by cross-referencing with multiple databases. Abstract characteristics associated with publication were analysed. Results: There were no differences in overall publication rates, impact factors or time to publication between 1995 and 2005. Overall, basic-science abstracts were twice as likely to achieve full publication than non-basic science. There was a significant fall in the publication rates for case series and audits, and significantly increased rates for fundamental/basic-science abstracts over the study period. There were non-significant increases in publication rates for controlled trials and systematic reviews. In general, publication rates for all predominantly clinically orientated abstracts reduced between the two periods with the most notable fall occurring in nutrition.  Conclusions: There was no evidence of a decline in overall abstract publication rates between 1995 and 2005. There seemed to be trend for increased publication rates of abstracts using perceived high-quality study methodologies with a corresponding decrease in those with lower quality methods. The proportion of basic-science abstracts is likely to be a determinant of overall full publication rates following scientific meetings.

Quality Assurance Program for Molecular Medicine Laboratories

PubMed Central

Hajia, M; Safadel, N; Samiee, S Mirab; Dahim, P; Anjarani, S; Nafisi, N; Sohrabi, A; Rafiee, M; Sabzavi, F; Entekhabi, B

2013-01-01

Background: Molecular diagnostic methods have played and continuing to have a critical role in clinical laboratories in recent years. Therefore, standardization is an evolutionary process that needs to be upgrade with increasing scientific knowledge, improvement of the instruments and techniques. The aim of this study was to design a quality assurance program in order to have similar conditions for all medical laboratories engaging with molecular tests. Methods: We had to design a plan for all four elements; required space conditions, equipments, training, and basic guidelines. Necessary guidelines was prepared and confirmed by the launched specific committee at the Health Reference Laboratory. Results: Several workshops were also held for medical laboratories directors and staffs, quality control manager of molecular companies, directors and nominees from universities. Accreditation of equipments and molecular material was followed parallel with rest of program. Now we are going to accredit medical laboratories and to evaluate the success of the program. Conclusion: Accreditation of medical laboratory will be succeeding if its basic elements are provided in advance. Professional practice guidelines, holding training and performing accreditation the molecular materials and equipments ensured us that laboratories are aware of best practices, proper interpretation, limitations of techniques, and technical issues. Now, active external auditing can improve the applied laboratory conditions toward the defined standard level. PMID:23865028

Quality assurance program for molecular medicine laboratories.

PubMed

Hajia, M; Safadel, N; Samiee, S Mirab; Dahim, P; Anjarani, S; Nafisi, N; Sohrabi, A; Rafiee, M; Sabzavi, F; Entekhabi, B

2013-01-01

Molecular diagnostic methods have played and continuing to have a critical role in clinical laboratories in recent years. Therefore, standardization is an evolutionary process that needs to be upgrade with increasing scientific knowledge, improvement of the instruments and techniques. The aim of this study was to design a quality assurance program in order to have similar conditions for all medical laboratories engaging with molecular tests. We had to design a plan for all four elements; required space conditions, equipments, training, and basic guidelines. Necessary guidelines was prepared and confirmed by the launched specific committee at the Health Reference Laboratory. Several workshops were also held for medical laboratories directors and staffs, quality control manager of molecular companies, directors and nominees from universities. Accreditation of equipments and molecular material was followed parallel with rest of program. Now we are going to accredit medical laboratories and to evaluate the success of the program. Accreditation of medical laboratory will be succeeding if its basic elements are provided in advance. Professional practice guidelines, holding training and performing accreditation the molecular materials and equipments ensured us that laboratories are aware of best practices, proper interpretation, limitations of techniques, and technical issues. Now, active external auditing can improve the applied laboratory conditions toward the defined standard level.

Advanced control of dissolved oxygen concentration in fed batch cultures during recombinant protein production.

PubMed

Kuprijanov, A; Gnoth, S; Simutis, R; Lübbert, A

2009-02-01

Design and experimental validation of advanced pO(2) controllers for fermentation processes operated in the fed-batch mode are described. In most situations, the presented controllers are able to keep the pO(2) in fermentations for recombinant protein productions exactly on the desired value. The controllers are based on the gain-scheduling approach to parameter-adaptive proportional-integral controllers. In order to cope with the most often appearing distortions, the basic gain-scheduling feedback controller was complemented with a feedforward control component. This feedforward/feedback controller significantly improved pO(2) control. By means of numerical simulations, the controller behavior was tested and its parameters were determined. Validation runs were performed with three Escherichia coli strains producing different recombinant proteins. It is finally shown that the new controller leads to significant improvements in the signal-to-noise ratio of other key process variables and, thus, to a higher process quality.

Moving beyond quality control in diagnostic radiology and the role of the clinically qualified medical physicist.

PubMed

Delis, H; Christaki, K; Healy, B; Loreti, G; Poli, G L; Toroi, P; Meghzifene, A

2017-09-01

Quality control (QC), according to ISO definitions, represents the most basic level of quality. It is considered to be the snapshot of the performance or the characteristics of a product or service, in order to verify that it complies with the requirements. Although it is usually believed that "the role of medical physicists in Diagnostic Radiology is QC", this, not only limits the contribution of medical physicists, but is also no longer adequate to meet the needs of Diagnostic Radiology in terms of Quality. In order to assure quality practices more organized activities and efforts are required in the modern era of diagnostic radiology. The complete system of QC is just one element of a comprehensive quality assurance (QA) program that aims at ensuring that the requirements of quality of a product or service will consistently be fulfilled. A comprehensive Quality system, starts even before the procurement of any equipment, as the need analysis and the development of specifications are important components under the QA framework. Further expanding this framework of QA, a comprehensive Quality Management System can provide additional benefits to a Diagnostic Radiology service. Harmonized policies and procedures and elements such as mission statement or job descriptions can provide clarity and consistency in the services provided, enhancing the outcome and representing a solid platform for quality improvement. The International Atomic Energy Agency (IAEA) promotes this comprehensive quality approach in diagnostic imaging and especially supports the field of comprehensive clinical audits as a tool for quality improvement. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Implementation workshop of WHO guidelines on evaluation of malaria vaccines: Current regulatory concepts and issues related to vaccine quality, Pretoria, South Africa 07 Nov 2014.

PubMed

Ho, Mei Mei; Baca-Estrada, Maria; Conrad, Christoph; Karikari-Boateng, Eric; Kang, Hye-Na

2015-08-26

The current World Health Organization (WHO) guidelines on the quality, safety and efficacy of recombinant malaria vaccines targeting the pre-erythrocytic and blood stages of Plasmodium falciparum were adopted by the WHO Expert Committee on Biological Standardization in 2012 to provide guidance on the quality, nonclinical and clinical aspects of recombinant malaria vaccines. A WHO workshop was organised to facilitate implementation into African (national/regional) regulatory practices, of the regulatory evaluation principles outlined in the guidelines regarding quality aspects. The workshop was used also to share knowledge and experience on regulatory topics of chemistry, manufacturing and control with a focus on vaccines through presentations and an interactive discussion using a case study approach. The basic principles and concepts of vaccine quality including consistency of production, quality control and manufacturing process were presented and discussed in the meeting. By reviewing and practicing a case study, better understanding on the relationship between consistency of production and batch release tests of an adjuvanted pre-erythrocytic recombinant malaria vaccine was reached. The case study exercise was considered very useful to understand regulatory evaluation principles of vaccines and a suggestion was made to WHO to provide such practices also through its Global Learning Opportunities for Vaccine Quality programme. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

A simulation study of emergency lunar escape to orbit using several simplified manual guidance and control techniques

NASA Technical Reports Server (NTRS)

Middleton, D. B.; Hurt, G. J., Jr.

1971-01-01

A fixed-base piloted simulator investigation has been made of the feasibility of using any of several manual guidance and control techniques for emergency lunar escape to orbit with very simplified, lightweight vehicle systems. The escape-to-orbit vehicles accommodate two men, but one man performs all of the guidance and control functions. Three basic attitude-control modes and four manually executed trajectory-guidance schemes were used successfully during approximately 125 simulated flights under a variety of conditions. These conditions included thrust misalinement, uneven propellant drain, and a vehicle moment-of-inertia range of 250 to 12,000 slugs per square foot. Two types of results are presented - orbit characteristics and pilot ratings of vehicle handling qualities.

Supplementation of an Artificial Medium for the Parasitoid Exorista larvarum (Diptera: Tachnidae) With Hemolymph of Hermetia illucens (Diptera: Stratiomyidae) or Antheraea pernyi (Lepidoptera: Saturniidae).

PubMed

Dindo, Maria Luisa; Vandicke, Jonas; Marchetti, Elisa; Spranghers, Thomas; Bonte, Jochem; De Clercq, Patrick

2016-04-01

The effect of supplementing hemolymph of the black soldier fly, Hermetia illucens (L.), or the Chinese oak silkworm, Antheraea pernyi (Guérin-Méneville), to a basic insect-free artificial medium for the tachinid Exorista larvarum (L.) was investigated. The supplementation (20% w/w) was based on the assumption that insect additives may optimize the media for this parasitoid. Egg hatch, pupal and adult yields, and sex ratio did not differ among the enriched and basic media. Preimaginal development was faster on both hemolymph-enriched media than on the basic medium. Despite the shorter development on the medium supplemented with H. illucens hemolymph than on the basic medium, on the two media puparium weights were comparable. The female flies reared on the medium enriched with H. illucens hemolymph did not lay more eggs, but the latter yielded significantly more puparia compared with the control females. Conversely, the medium enriched with A. pernyi hemolymph yielded lower female puparium weights than the basic medium and produced only one ovipositing female out of the five obtained female adults. These results indicate that the in vitro development of E. larvarum improved when the basic artificial medium was enriched with H. illucens hemolymph, whereas the supplementation with A. pernyi hemolymph negatively affected the quality of the in vitro-reared females.

The integrated manual and automatic control of complex flight systems

NASA Technical Reports Server (NTRS)

Schmidt, David K.

1991-01-01

Research dealt with the general area of optimal flight control synthesis for manned flight vehicles. The work was generic; no specific vehicle was the focus of study. However, the class of vehicles generally considered were those for which high authority, multivariable control systems might be considered, for the purpose of stabilization and the achievement of optimal handling characteristics. Within this scope, the topics of study included several optimal control synthesis techniques, control-theoretic modeling of the human operator in flight control tasks, and the development of possible handling qualities metrics and/or measures of merit. Basic contributions were made in all these topics, including human operator (pilot) models for multi-loop tasks, optimal output feedback flight control synthesis techniques; experimental validations of the methods developed, and fundamental modeling studies of the air-to-air tracking and flared landing tasks.

Effects of sous-vide method at different temperatures, times and vacuum degrees on the quality, structural, and microbiological properties of pork ham.

PubMed

Jeong, Kiyoung; O, Hyeonbin; Shin, So Yeon; Kim, Young-Soon

2018-04-10

This study evaluated the influence of different factors on pork hams cooked by sous-vide method. The quality and structural and microbiological properties of the treated samples were compared with those of controls. Samples were subjected to treatment at different combinations of temperature (61 °C or 71 °C), time (45 or 90 min), and vacuum degree (98.81% or 96.58%). The control sample was air packaged and boiled for 45 min in boiling water. Temperature and vacuum degree affected quality properties, while the effect of time was limited. Samples cooked at 61 °C showed higher moisture content, redness, and pink color of the meat juice, whereas samples cooked at 71 °C showed higher cooking loss rate, lightness, and volatile basic nitrogen values. Texture analysis indicated tenderer meat for the treatment group than the control. No microbial growth was detected in any treatment groups. Meat cooked at 61 °C and 98.81% vacuum showed more spacious arrangement of meat fiber. Copyright © 2018 Elsevier Ltd. All rights reserved.

Chemical Composition, Starch Digestibility and Antioxidant Capacity of Tortilla Made with a Blend of Quality Protein Maize and Black Bean

PubMed Central

Grajales-García, Eva M.; Osorio-Díaz, Perla; Goñi, Isabel; Hervert-Hernández, Deisy; Guzmán-Maldonado, Salvador H.; Bello-Pérez, Luis A.

2012-01-01

Tortilla and beans are the basic components in the diet of people in the urban and rural areas of Mexico. Quality protein maize is suggested for tortilla preparation because it presents an increase in lysine and tryptophan levels. Beans contain important amounts of dietary fiber. The objective of this study was to prepare tortilla with bean and assesses the chemical composition, starch digestibility and antioxidant capacity using a quality protein maize variety. Tortilla with bean had higher protein, ash, dietary fiber and resistant starch content, and lower digestible starch than control tortilla. The hydrolysis rate (60 to 50%) and the predicted glycemic index (88 to 80) of tortilla decreased with the addition of bean in the blend. Extractable polyphenols and proanthocyanidins were higher in the tortilla with bean than control tortilla. This pattern produced higher antioxidant capacity of tortilla with bean (17.6 μmol Trolox eq/g) than control tortilla (7.8 μmol Trolox eq/g). The addition of bean to tortilla modified the starch digestibility and antioxidant characteristics of tortilla, obtaining a product with nutraceutical characteristics. PMID:22312252

Statistical Quality Control of Moisture Data in GEOS DAS

NASA Technical Reports Server (NTRS)

Dee, D. P.; Rukhovets, L.; Todling, R.

1999-01-01

A new statistical quality control algorithm was recently implemented in the Goddard Earth Observing System Data Assimilation System (GEOS DAS). The final step in the algorithm consists of an adaptive buddy check that either accepts or rejects outlier observations based on a local statistical analysis of nearby data. A basic assumption in any such test is that the observed field is spatially coherent, in the sense that nearby data can be expected to confirm each other. However, the buddy check resulted in excessive rejection of moisture data, especially during the Northern Hemisphere summer. The analysis moisture variable in GEOS DAS is water vapor mixing ratio. Observational evidence shows that the distribution of mixing ratio errors is far from normal. Furthermore, spatial correlations among mixing ratio errors are highly anisotropic and difficult to identify. Both factors contribute to the poor performance of the statistical quality control algorithm. To alleviate the problem, we applied the buddy check to relative humidity data instead. This variable explicitly depends on temperature and therefore exhibits a much greater spatial coherence. As a result, reject rates of moisture data are much more reasonable and homogeneous in time and space.

Hope as a Psychological Factor Affecting Quality of Life in Patients With Psoriasis.

PubMed

Szramka-Pawlak, Beata; Hornowska, Elżbieta; Walkowiak, Hanna; Zaba, Ryszard

2014-01-01

Clinical observations and medical reports indicate that psoriasis has a tremendous impact on patients' lives, lowering their quality in many important areas. However, the vast majority of research deals only with health-related issues. This study aimed to compare the general quality of life of psoriasis patients and healthy volunteers by examining psychological variables thought to modify the quality of life. 42 patients with psoriasis and 42 healthy volunteers matched for gender, age and education level were tested. Flanagan Quality of Life Scale was used to evaluate general quality of life. Basic hope level was assessed with Basic Hope Inventory. Trait hope was estimated using Trait Hope Scale. Psoriasis Area Severity Index was used to assess the severity of the disease. Psoriasis patients have a significantly lower overall quality of life ( p  = 0.05), modified by Physical and Material Well-being ( p  = 0.01), Personal Development and Fulfillment ( p  = 0.03), and Recreation ( p  = 0.04). They also have lower levels of trait hope ( p  = 0.04) and its agency component ( p  = 0.01). There were moderate, negative significant correlations with basic hope and such components of quality of life as Physical and Material Well-being ( p  = 0.03, r  = - 0.34) and Relations with other People ( p  = 0.02, r  = - 0.35). These results support the hypothesis of a reduced general quality of life and trait hope in psoriatics. Thus, psychological help for people suffering from dermatological disorders might be as important as medical intervention. Basic hope can be treated as a resource in coping with these disorders and trait hope as a resource conducive to well-being.

[Quality Management for Surgeons: The Knowledge of Basic Contexts and Innovative Strategies Promotes the Competitiveness of Clinical Department].

PubMed

Hellmann, Wolfgang

2017-12-01

Efficient quality management aiming to achieve high quality in patient care is crucial to the success of a surgery department. This requires the knowledge of relevant terms und contexts of quality management. Implementation remains difficult in the light of demographic change and skills shortage. If a hospital has an efficient internal quality management in place, this should be used as a supplementary instrument. Otherwise it is the (sole) task of a specialist department to ensure quality for patients, employees, and cooperative partners. This paper provides basic knowledge on quality management, risk management, and quality assurance in the context of relevant medical terms. It demonstrates new ways for implementation on the level of a surgery department, and introduces a new model of quality. Georg Thieme Verlag KG Stuttgart · New York.

Air Quality and Pollution. Environmental Studies. 4 Color Transparencies, Reproducibles & Teaching Guide. Grade 3, 4, 5.

ERIC Educational Resources Information Center

Ortleb, Edward P.; And Others

The world is faced with a variety of environmental problems. No country has escaped pollution and resource depletion. Basic ecological principles are often ignored and sometimes this contributes to ecological disasters. This volume is designed to provide basic information about the quality of the earth's atmosphere. The visual aids, worksheets,…

The Integration of Quality-Oriented Education and Instrument-Driven Training in Chinese College English Teaching

ERIC Educational Resources Information Center

Jian, Shi

2013-01-01

College English Teaching (CET) plays an important and basic part in the whole college education system in China and whether it should adopt the quality-centered education or tool-oriented training remains controversial in current Chinese CET practices. After comparing several basic concepts and analyzing the existing problems in Chinese practical…

Stakeholders' Perceptions of Quality and Potential Improvements in the Learning Resources Centers at Omani Basic Education Schools

ERIC Educational Resources Information Center

Al Musawi, Ali; Amer, Talal

2017-01-01

This study attempts to investigate the stakeholders' perceptions of quality and prospective improvements in the learning resources centres (LRC) at Omani basic education schools. It focuses on different aspects of the LRCs: organisation, human resources, technological, and educational aspects along with the difficulties faced by these LRCs and…

Water Quality and Pollution. Environmental Studies. 4 Color Transparencies, Reproducibles & Teaching Guide. Grade 3, 4, 5.

ERIC Educational Resources Information Center

Ortleb, Edward P.; And Others

The world is faced with a variety of environmental problems. No country has escaped pollution and resource depletion. Basic ecological principles are often ignored and sometimes this contributes to ecological disasters. This volume is designed to provide basic information about the quality of the earth's water resources. The visual aids,…

Subtle Convergence? Locating Similarities between Chinese Educational Reforms and Global Quality Assurance and Evaluation Trends

ERIC Educational Resources Information Center

Suominen, Olli; Rinne, Risto; Kallo, Johanna; Fan, Yihong

2017-01-01

Purpose: Different aspects of the globalisation of Chinese basic education have been examined in recent studies. This paper aims to contribute to this research base by examining the relationship between global quality assurance and evaluation (QAEVAL) trends and reforms in the Chinese basic education system. Design/methodology/approach: Relevant…

Random Forest Application for NEXRAD Radar Data Quality Control

NASA Astrophysics Data System (ADS)

Keem, M.; Seo, B. C.; Krajewski, W. F.

2017-12-01

Identification and elimination of non-meteorological radar echoes (e.g., returns from ground, wind turbines, and biological targets) are the basic data quality control steps before radar data use in quantitative applications (e.g., precipitation estimation). Although WSR-88Ds' recent upgrade to dual-polarization has enhanced this quality control and echo classification, there are still challenges to detect some non-meteorological echoes that show precipitation-like characteristics (e.g., wind turbine or anomalous propagation clutter embedded in rain). With this in mind, a new quality control method using Random Forest is proposed in this study. This classification algorithm is known to produce reliable results with less uncertainty. The method introduces randomness into sampling and feature selections and integrates consequent multiple decision trees. The multidimensional structure of the trees can characterize the statistical interactions of involved multiple features in complex situations. The authors explore the performance of Random Forest method for NEXRAD radar data quality control. Training datasets are selected using several clear cases of precipitation and non-precipitation (but with some non-meteorological echoes). The model is structured using available candidate features (from the NEXRAD data) such as horizontal reflectivity, differential reflectivity, differential phase shift, copolar correlation coefficient, and their horizontal textures (e.g., local standard deviation). The influence of each feature on classification results are quantified by variable importance measures that are automatically estimated by the Random Forest algorithm. Therefore, the number and types of features in the final forest can be examined based on the classification accuracy. The authors demonstrate the capability of the proposed approach using several cases ranging from distinct to complex rain/no-rain events and compare the performance with the existing algorithms (e.g., MRMS). They also discuss operational feasibility based on the observed strength and weakness of the method.

Auditing radiation sterilization facilities

NASA Astrophysics Data System (ADS)

Beck, Jeffrey A.

The diversity of radiation sterilization systems available today places renewed emphasis on the need for thorough Quality Assurance audits of these facilities. Evaluating compliance with Good Manufacturing Practices is an obvious requirement, but an effective audit must also evaluate installation and performance qualification programs (validation_, and process control and monitoring procedures in detail. The present paper describes general standards that radiation sterilization operations should meet in each of these key areas, and provides basic guidance for conducting QA audits of these facilities.

Basic and Applied Research in the Field of Electronics and Communications.

DTIC Science & Technology

1986-03-19

301 Theses ?9. N. P. Vlannes, "Optical and :nduction Probing of aSagnezos:atic -vaves in Thin Films of Yttrium :ron Garnet ," ?H D Thesis, Departrment f...used in high-quality, single-crystal ferrite thin films . Both experimental and theoretical analyses verified several new transmission modes, and...4-amD :urrent at 160 kilohertz. (References: 52, 61, 134). X’NM. Control of Microstructure in Thin- Film Electronic Materials Professor C. Thompson

Autonomous Control Modes and Optimized Path Guidance for Shipboard Landing in High Sea States

DTIC Science & Technology

2016-01-29

Research in Sea-Based Aviation ONR #BAA12-SN-028 CDRL A001 DISTRIBUTION STATEMENT A: Distribution Approved for public release; distribution...is performed under the Office of Naval Research program on Basic and Applied Research in Sea- Based Aviation (ONR BAA12-SN-0028). This project...addresses the Sea Based Aviation (SBA) initiative in Advanced Handling Qualities for Rotorcraft. Landing a rotorcraft on a moving ship deck and under the

Porcine cadaver organ or virtual-reality simulation training for laparoscopic cholecystectomy: a randomized, controlled trial.

PubMed

Van Bruwaene, Siska; Schijven, Marlies P; Napolitano, Daniel; De Win, Gunter; Miserez, Marc

2015-01-01

As conventional laparoscopic procedural training requires live animals or cadaver organs, virtual simulation seems an attractive alternative. Therefore, we compared the transfer of training for the laparoscopic cholecystectomy from porcine cadaver organs vs virtual simulation to surgery in a live animal model in a prospective randomized trial. After completing an intensive training in basic laparoscopic skills, 3 groups of 10 participants proceeded with no additional training (control group), 5 hours of cholecystectomy training on cadaver organs (= organ training) or proficiency-based cholecystectomy training on the LapMentor (= virtual-reality training). Participants were evaluated on time and quality during a laparoscopic cholecystectomy on a live anaesthetized pig at baseline, 1 week (= post) and 4 months (= retention) after training. All research was performed in the Center for Surgical Technologies, Leuven, Belgium. In total, 30 volunteering medical students without prior experience in laparoscopy or minimally invasive surgery from the University of Leuven (Belgium). The organ training group performed the procedure significantly faster than the virtual trainer and borderline significantly faster than control group at posttesting. Only 1 of 3 expert raters suggested significantly better quality of performance of the organ training group compared with both the other groups at posttesting (p < 0.01). There were no significant differences between groups at retention testing. The virtual trainer group did not outperform the control group at any time. For trainees who are proficient in basic laparoscopic skills, the long-term advantage of additional procedural training, especially on a virtual but also on the conventional organ training model, remains to be proven. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Improving Pediatric Basic Life Support Performance Through Blended Learning With Web-Based Virtual Patients: Randomized Controlled Trial.

PubMed

Lehmann, Ronny; Thiessen, Christiane; Frick, Barbara; Bosse, Hans Martin; Nikendei, Christoph; Hoffmann, Georg Friedrich; Tönshoff, Burkhard; Huwendiek, Sören

2015-07-02

E-learning and blended learning approaches gain more and more popularity in emergency medicine curricula. So far, little data is available on the impact of such approaches on procedural learning and skill acquisition and their comparison with traditional approaches. This study investigated the impact of a blended learning approach, including Web-based virtual patients (VPs) and standard pediatric basic life support (PBLS) training, on procedural knowledge, objective performance, and self-assessment. A total of 57 medical students were randomly assigned to an intervention group (n=30) and a control group (n=27). Both groups received paper handouts in preparation of simulation-based PBLS training. The intervention group additionally completed two Web-based VPs with embedded video clips. Measurements were taken at randomization (t0), after the preparation period (t1), and after hands-on training (t2). Clinical decision-making skills and procedural knowledge were assessed at t0 and t1. PBLS performance was scored regarding adherence to the correct algorithm, conformance to temporal demands, and the quality of procedural steps at t1 and t2. Participants' self-assessments were recorded in all three measurements. Procedural knowledge of the intervention group was significantly superior to that of the control group at t1. At t2, the intervention group showed significantly better adherence to the algorithm and temporal demands, and better procedural quality of PBLS in objective measures than did the control group. These aspects differed between the groups even at t1 (after VPs, prior to practical training). Self-assessments differed significantly only at t1 in favor of the intervention group. Training with VPs combined with hands-on training improves PBLS performance as judged by objective measures.

Water Quality and Sustainable Environmental Health

NASA Astrophysics Data System (ADS)

Setegn, S. G.

2014-12-01

Lack of adequate safe water, the pollution of the aquatic environment and the mismanagement of resources are major causes of ill-health and mortality, particularly in the developing countries. In order to accommodate more growth, sustainable fresh water resource management will need to be included in future development plans. One of the major environmental issues of concern to policy-makers is the increased vulnerability of ground water quality. The main challenge for the sustainability of water resources is the control of water pollution. To understand the sustainability of the water resources, one needs to understand the impact of future land use and climate changes on the natural resources. Providing safe water and basic sanitation to meet the Millennium Development Goals will require substantial economic resources, sustainable technological solutions and courageous political will. A balanced approach to water resources exploitation for development, on the one hand, and controls for the protection of health, on the other, is required if the benefits of both are to be realized without avoidable detrimental effects manifesting themselves. Meeting the millennium development goals for water and sanitation in the next decade will require substantial economic resources, sustainable technological solutions and courageous political will. In addition to providing "improved" water and "basic" sanitation services, we must ensure that these services provide: safe drinking water, adequate quantities of water for health, hygiene, agriculture and development and sustainable sanitation approaches to protect health and the environment.

Chromatographic multivariate quality control of pharmaceuticals giving strongly overlapped peaks based on the chromatogram profile.

PubMed

Escuder-Gilabert, L; Ruiz-Roch, D; Villanueva-Camañas, R M; Medina-Hernández, M J; Sagrado, S

2004-03-12

In the present paper, the simultaneous quantification of two analytes showing strongly overlapped chromatographic peaks (alpha = 1.02), under the assumption that both available equipment and training of the laboratory staff are basic, is studied. A pharmaceutical preparation (Mutabase) containing two drugs of similar physicochemical properties (amitriptyline and perphenazine) is selected as case of study. The assays are carried out under realistic working conditions (i.e. routine testing laboratories). Uncertainty considerations are introduced in the study. A partial least squares model is directly applied to the chromatographic data (with no previous signal transformation) to perform quality control of the pharmaceutical formulation. Under the adequate protocol, the relative error in prediction of analytes is within the tolerances found in the pharmacopeia (10%). For spiked samples simulating formulation mistakes, the errors found have the same magnitude and sign to those provoked.

Applications of artificial neural networks (ANNs) in food science.

PubMed

Huang, Yiqun; Kangas, Lars J; Rasco, Barbara A

2007-01-01

Artificial neural networks (ANNs) have been applied in almost every aspect of food science over the past two decades, although most applications are in the development stage. ANNs are useful tools for food safety and quality analyses, which include modeling of microbial growth and from this predicting food safety, interpreting spectroscopic data, and predicting physical, chemical, functional and sensory properties of various food products during processing and distribution. ANNs hold a great deal of promise for modeling complex tasks in process control and simulation and in applications of machine perception including machine vision and electronic nose for food safety and quality control. This review discusses the basic theory of the ANN technology and its applications in food science, providing food scientists and the research community an overview of the current research and future trend of the applications of ANN technology in the field.

Water-quality assessment of the eastern Iowa basins- nitrogen, phosphorus, suspended sediment, and organic carbon in surface water, 1996-98

USGS Publications Warehouse

Becher, Kent D.; Kalkhoff, Stephen J.; Schnoebelen, Douglas J.; Barnes, Kimberlee K.; Miller, Von E.

2001-01-01

Synoptic samples collected during low and high base flow had nitrogen, phosphorus, and organic-carbon concentrations that varied spatially and seasonally. Comparisons of water-quality data from six basic-fixed sampling sites and 19 other synoptic sites suggest that the water-quality data from basic-fixed sampling sites were representative of the entire study unit during periods of low and high base flow when most streamflow originates from ground water.

New irradiation facilities for development of production methods of medical radionuclides at cyclotrons at Forschungszentrum Jülich

NASA Astrophysics Data System (ADS)

Spellerberg, S.; Scholten, B.; Spahn, I.; Felden, O.; Gebel, R.; Qaim, S. M.; Bai, M.; Neumaier, B.

2017-05-01

An essential basis for research and development work on radiopharmaceuticals is the efficient production of radionuclides of high quality. In this process research-oriented studies aiming for elucidation of biochemical processes require novel products. The radionuclide development at INM-5 entails basic research, e.g. the determination of nuclear reaction data, as well as technical aspects of practical production, such as high-current targetry, chemical separation, formulation and quality control. In this work developments, adaptation and optimization of irradiation facilities at the BC 1710, JULIC as Injector of COSY and COSY itself are summarized, which shall allow the extension of radionuclide production possibilities, aiming at innovations in medical applications.

Photonic Diagnostic Technique For Thin Photoactive Films

NASA Technical Reports Server (NTRS)

Thakoor, Sarita

1996-01-01

Photonic diagnostic technique developed for use in noninvasive, rapid evaluation of thin paraelectric/ferroelectric films. Method proves useful in basic research, on-line monitoring for quality control at any stage of fabrication, and development of novel optoelectronic systems. Used to predict imprint-prone memory cells, and to study time evolution of defects in ferroelectric memories during processing. Plays vital role in enabling high-density ferroelectric memory manufacturing. One potential application lies in use of photoresponse for nondestructive readout of polarization memory states in high-density, high-speed memory devices. In another application, extension of basic concept of method makes possible to develop specially tailored ferrocapacitor to act as programmable detector, wherein remanent polarization used to modulate photoresponse. Large arrays of such detectors useful in optoelectronic processing, computing, and communication.

Laser-driven electron beam and radiation sources for basic, medical and industrial sciences

PubMed Central

NAKAJIMA, Kazuhisa

2015-01-01

To date active research on laser-driven plasma-based accelerators have achieved great progress on production of high-energy, high-quality electron and photon beams in a compact scale. Such laser plasma accelerators have been envisaged bringing a wide range of applications in basic, medical and industrial sciences. Here inheriting the groundbreaker’s review article on “Laser Acceleration and its future” [Toshiki Tajima, (2010)],1) we would like to review recent progress of producing such electron beams due to relativistic laser-plasma interactions followed by laser wakefield acceleration and lead to the scaling formulas that are useful to design laser plasma accelerators with controllability of beam energy and charge. Lastly specific examples of such laser-driven electron/photon beam sources are illustrated. PMID:26062737

Development of quality control procedures for mass produced and released Bactrocera Philippinensis (Diptera: Tephritidae) for sterile insect technique programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Resilva, S.; Obra, G.; Zamora, N.

Quality control procedures for Bactrocera philippinensis Drew and Hancock 1994 (Diptera: Tephritidae) used in sterile insect technique (SIT) programs were established in the mass rearing facility at the Philippine Nuclear Research Institute. Basic studies on pupal irradiation, holding/packaging systems, shipping procedures, longevity, sterility studies, and pupal eye color determination in relation to physiological development at different temperature regimes were investigated. These studies will provide baseline data for the development of quality control protocols for an expansion of B. philippinensis field programs with an SIT component in the future. (author) [Spanish] Los procedimientos de control de calidad para Bactrocera philippinensis Drewmore » y Hancock 1994 (Diptera: Tephritidae) usados en programas de la tecnica de insecto esteril (TIE) fueron establecidos en la facilidad de cria en masa del Instituto Filipino de Investigacion Nuclear. Estudios basicos sobre la irradiacion de las pupas, sistemas de almacenaje/empaque, procedimientos del envio, longevidad, estudios de esterilidad y la determinacion del color de ojo de la pupa en relacion con el desarrollo fisiologico en regimenes diferentes de temperatura fueron investigados. Estos estudios proveeran una linea de informacion basica para el desarrollo de protocolos de control de calidad para una expansion de los programas de campo para B. philippinensis con un componente de TIS en el futuro. (author)« less

A pilot study of indoor air quality in screen golf courses.

PubMed

Goung, Sun-Ju Nam; Yang, Jinho; Kim, Yoon Shin; Lee, Cheol Min

2015-05-01

The aims of this study were to provide basic data for determining policies on air quality for multi-user facilities, including the legal enrollment of the indoor air quality regulation as designated by the Ministry of Environment, and to establish control plans. To this end, concentrations of ten pollutants (PM10, carbon monoxide (CO), carbon dioxide (CO2), nitrogen dioxide (NO2), formaldehyde (HCHO), total volatile organic compounds (TVOCs), radon (Rn), oxone (O3), total bacteria counts (TBC), and asbestos) in addition to nicotine, a smoking index material used to determine the impact of smoking on the air quality, were investigated in indoor game rooms and lobbies of 64 screen golf courses. The average concentration of none of the ten pollutants in the game rooms and lobbies of screen golf courses was found to exceed the limit set by the law. There were, however, pollutant concentrations exceeding limits in some screen golf courses, in order to establish a control plan for the indoor air quality of screen golf courses, a study on the emission sources of each pollutant was conducted. The major emission sources were found to be facility users' activities such as smoking and the use of combustion appliances, building materials, and finishing materials.

Effects of home-based diet and exercise on functional outcomes among older, overweight long-term cancer survivors: RENEW: a randomized controlled trial.

PubMed

Morey, Miriam C; Snyder, Denise C; Sloane, Richard; Cohen, Harvey Jay; Peterson, Bercedis; Hartman, Terryl J; Miller, Paige; Mitchell, Diane C; Demark-Wahnefried, Wendy

2009-05-13

Five-year survival rates for early stage colorectal, breast, and prostate cancer currently exceed 90% and are increasing. Cancer survivors are at greater risk for second malignancies, other comorbidities, and accelerated functional decline. Lifestyle interventions may provide benefit, but it is unknown whether long-term cancer survivors can modify their lifestyle behaviors sufficiently to improve functional status. To determine whether a telephone counseling and mailed print material-based diet and exercise intervention is effective in reorienting functional decline in older, overweight cancer survivors. Randomized controlled trial of 641 overweight (body mass index > or = 25 and < 40), long-term (> or = 5 years) survivors (aged 65-91 years) of colorectal, breast, and prostate cancer, who were randomly assigned to an intervention group (n = 319) or delayed intervention (control) group (n = 322) in Canada, the United Kingdom, and 21 US states. Individuals were recruited for the Reach out to Enhance Wellness (RENEW) trial from July 1, 2005, through May 17, 2007. A 12-month, home-based tailored program of telephone counseling and mailed materials promoting exercise, improved diet quality, and modest weight loss. The control group was wait-listed for 12 months. Change in self-reported physical function on the Short-Form 36 physical function subscale (score range, 0-100; a high score indicates better functioning) from baseline to 12 months was the primary end point. Secondary outcomes included changes in function on the basic and advanced lower extremity function subscales of the Late Life Function and Disability Index (score range, 0-100), physical activity, body mass index, and overall health-related quality of life. The mean baseline Short-Form 36 physical function score was 75.7. At the 12-month follow-up, the mean function scores declined less rapidly in the intervention group (-2.15; 95% confidence interval [CI], -0.36 to -3.93) compared with the control group (-4.84; 95% CI, -3.04 to -6.63) (P = .03). The mean baseline basic lower extremity function score was 78.2. The mean changes in basic lower extremity function were 0.34 (95% CI, -0.84 to 1.52) in the intervention group compared with -1.89 (95% CI, -0.70 to -3.09) in the control group (P = .005). Physical activity, dietary behaviors, and overall quality of life increased significantly in the intervention group compared with the control group, and weight loss also was greater (2.06 kg [95% CI, 1.69 to 2.43 kg] vs 0.92 kg [95% CI, 0.51 to 1.33 kg], respectively; P < .001). Among older, long-term survivors of colorectal, breast, and prostate cancer, a diet and exercise intervention reduced the rate of self-reported functional decline compared with no intervention. clinicaltrials.gov Identifier: NCT00303875.

Study on the relationship between the opening of environmental tax and the prevention and control of air pollution in China

NASA Astrophysics Data System (ADS)

Gao, Guilin; Wang, Tianyi

2018-03-01

This article systematically expounds the status quo and sources of air pollution, the experience of foreign environmental tax policy, the advantages and disadvantages of environmental taxes levied in our country through literature research, historical analysis and comparative analysis and put forward recommendations on tax policy of prevention and control of air pollution by combining with the specific national conditions in our country. As one of the basic means of national macro-control, the tax policy is the major countermeasure that cannot be ignored in the prevention and control of air pollution. Studying the tax policy of prevention and control of air pollution will help to effectively control air pollution, develop a green economy and recycle economy and achieve the goal of improving environmental quality.

Peers versus professional training of basic life support in Syria: a randomized controlled trial.

PubMed

Abbas, Fatima; Sawaf, Bisher; Hanafi, Ibrahem; Hajeer, Mohammad Younis; Zakaria, Mhd Ismael; Abbas, Wafaa; Alabdeh, Fadi; Ibrahim, Nazir

2018-06-18

Peer training has been identified as a useful tool for delivering undergraduate training in basic life support (BLS) which is fundamental as an initial response in cases of emergency. This study aimed to (1) Evaluate the efficacy of peer-led model in basic life support training among medical students in their first three years of study, compared to professional-led training and (2) To assess the efficacy of the course program and students' satisfaction of peer-led training. A randomized controlled trial with blinded assessors was conducted on 72 medical students from the pre-clinical years (1st to 3rd years in Syria) at Syrian Private University. Students were randomly assigned to peer-led or to professional-led training group for one-day-course of basic life support skills. Sixty-four students who underwent checklist based assessment using objective structured clinical examination design (OSCE) (practical assessment of BLS skills) and answered BLS knowledge checkpoint-questionnaire were included in the analysis. There was no statistically significant difference between the two groups in delivering BLS skills to medical students in practical (P = 0.850) and BLS knowledge questionnaire outcomes (P = 0.900). Both groups showed statistically significant improvement from pre- to post-course assessment with significant statistical difference in both practical skills and theoretical knowledge (P-Value < 0.001). Students were satisfied with the peer model of training. Peer-led training of basic life support for medical students was beneficial and it provided a quality of education which was as effective as training conducted by professionals. This method is applicable and desirable especially in poor-resource countries and in crisis situation.

Motivational profiles and their relationships with basic psychological needs, academic performance, study strategies, self-esteem, and vitality in dental students in Chile.

PubMed

Orsini, Cesar A; Binnie, Vivian I; Tricio, Jorge A

2018-01-01

To determine dental students' motivational profiles through a person-centred approach and to analyse the associations with the satisfaction of their basic psychological needs, study strategies, academic performance, self-esteem, and vitality. A total of 924 students from the University of San Sebastian (Chile) participated in this cross-sectional cor¬relational study in spring 2016. Data were collected through 5 self-reported instruments, in addition to students' academic performance. The Cronbach alpha, descriptive statistics, and correla¬tion scores were computed. A k-means cluster analysis with intrinsic and controlled motivation was conducted to identify different mo-tivational profiles. Subsequently, multivariate analysis of covariance controlling for the effects of gender and year of study was carried out to assess differences among the retained motivational profiles and learning variables. All instruments showed acceptable Cronbach alpha scores. A 4-cluster solution was retained for the motivational profile over a 3- or 5-cluster solution. Students' motiva-tional profiles were characterized by different degrees of intrinsic and controlled motivation. The high intrinsic motivation groups showed higher perceptions of their basic psychological, a greater propensity for a deep rather than surface study strategy, better academic performance, and higher scores for self-esteem and vitality than the low intrinsic motivation groups, regardless of the degree of controlled motivation. Students with a high intrinsic motivation profile, regardless of their controlled motivation scores, reported better learning characteristics. Therefore, special attention should be paid to students' motivational profiles, as the quality of motivation might serve as a basis for interventions to support their academic success and well-being.

Quality dimensions in health evaluation: manager's conceptions.

PubMed

Bosi, Maria Lúcia Magalhães; Pontes, Ricardo José Soares; Vasconcelos, Suziana Martins de

2010-04-01

To understand manager's perceptions and experiences in regards to qualitative evaluations in basic health care. A qualitative study, based on the critical interpretive approach, was performed in 2006, in the city of Fortaleza, Northeastern Brazil. The sample consisted of the group responsible for planning basic health care at the state level. In order to obtain the empirical data, the focus group technique was utilized. Two central themes emerged concerning the perceptions about quality and the dimensions of quality employed in health evaluations, which were revealed in distinct ways. The concepts of quality evaluation and qualitative evaluation did not appear clearly understood, confusing qualitative evaluation with formal quality evaluations. Likewise, the inherent multidimensionality of quality was not recognized. Despite the criticism expressed by the participants regarding the improper quantification of certain dimensions, the necessary technical skills and understanding were not observed for the approach to include the distinct dimensions of quality in the evaluation process. The conceptions of managers responsible for the planning of basic health care at the state level revealed an important disassociation from the premises of qualitative evaluation, especially those evaluations oriented by the fourth generation approach. Therefore, the model adopted by these actors for the evaluation of program and service quality did not consider their multidimensionality.

The legal framework governing the quality of (traditional) herbal medicinal products in the European Union.

PubMed

Kroes, Burt H

2014-12-02

In the European Union a complex regulatory framework is in place for the regulation of (traditional) herbal medicinal products. It is based on the principle that a marketing authorisation granted by the competent authorities is required for placing medicinal products on the market. The requirements and procedures for acquiring such a marketing authorisation are laid down in regulations, directives and scientific guidelines. This paper gives an overview of the quality requirements for (traditional) herbal medicinal products that are contained in European pharmaceutical legislation. Pharmaceutical quality of medicinal product is the basis for ensuring safe and effective medicines. The basic principles governing the assurance of the quality of medicinal products in the European Union are primarily defined in the amended Directive 2001/83/EC and Directive 2003/63/EC. Quality requirements of herbal medicinal products are also laid down in scientific guidelines. Scientific guidelines provide a basis for practical harmonisation of how the competent authorities of EU Member States interpret and apply the detailed requirements for the demonstration of quality laid down in regulations and directives. Detailed quality requirements for herbal medicinal products on the European market are contained in European Union (EU) pharmaceutical legislation. They include a system of manufacturing authorisations which ensures that all herbal medicinal products on the European market are manufactured/imported only by authorised manufacturers, whose activities are regularly inspected by the competent authorities. Additionally, as starting materials only active substances are allowed which have been manufactured in accordance with the GMP for starting materials as adopted by the Community. The European regulatory framework encompasses specific requirements for herbal medicinal products. These requirements are independent from the legal status. Thus, the same quality standards equally apply to herbal products based on clinical evidence and traditional herbal medicinal products. The basic principle is that the quality of herbal medicinal products is intrinsically associated with the quality standard of the herbal substances and/or herbal preparations. Furthermore, the herbal substance or herbal preparation in its entirety is regarded as the active substance. Consequently, a mere determination of the content of marker(s) or constituents with known therapeutic activity is not sufficient for the quality control of herbal medicinal products. Specific quality requirements include thorough product characterisation, adherence to the Good Agricultural and Collection Practices, good manufacturing practices and validated manufacturing process, e.g., raw material testing, in-process testing, fingerprint characterisation etc. Quality control of herbal medicinal products is primarily intended to define the quality of the herbal substance/preparation and herbal medicinal product rather than to establish full characterisation. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

A Comparison of Methodological Approaches for Evaluating the Quality of Basic Skills Programs. AIR Forum 1982 Paper.

ERIC Educational Resources Information Center

Dumont, Richard G.; And Others

A multiple-indicator and multiple-design approach for evaluating the quality of basic skills programs in reading, writing, and mathematics that has been implemented within a statewide system of higher education in the southeastern United States was assessed. Several of the evaluation methodologies are compared in order to determine whether results…

Domains of Quality of Life of People with Profound Multiple Disabilities: The Perspective of Parents and Direct Support Staff

ERIC Educational Resources Information Center

Petry, Katja; Maes, Bea; Vlaskamp, Carla

2005-01-01

Background: This study considered the general validity of the basic domains of quality of life that appear in theoretical models, in relation to people with profound multiple disabilities. The authors examined how parents and direct support staff operationalized these basic domains for people with profound multiple disabilities. They investigated…

Indicators of Program Quality, Measures of Performance & Standards. Adult Basic Education and ESL Programs in NJ. Summary Report.

ERIC Educational Resources Information Center

Merkel-Keller, Claudia; Streeter-Scrupski, Sandra

In 1992, adult education staff and adult literacy volunteer organizations developed 8 indicators of program quality to be used for evaluating adult basic education and English as a Second Language (ESL) programs in New Jersey. Performance standards were developed to match the standards. An evaluation was conducted to determine how the indicators…

The use of LANDSAT by the states for water quality assessment

NASA Technical Reports Server (NTRS)

Middleton, E. M.

1981-01-01

The use of LANDSAT for water resources applications in U.S. state demonstration projects is reviewed. The most common single application undertaken between 1976 and 1981 was found to be water condition assessment. The majority of projects, however, fell into the general category of watershed hydrology. Some of the states are attempting to use LANDSAT data in an operational mode for water quality assessment. Two of these state projects from Vermont and Wisconsin are described in brief. The basic information requirements of Section 314 of the U.S. Pollution Control Act are given with the type of input LANDSAT data could potentially provide toward those requirements. Surveys were performed to determine: (1) how its states were responding in 1980 to 1981 to the federal and state water quality laws; and (2) the status of LANDSAT analysis capabilities of each state.

Evaluation of the implementation of a quality system in a basic research laboratory: viability and impacts.

PubMed

Fraga, Hilda Carolina de Jesus Rios; Fukutani, Kiyoshi Ferreira; Celes, Fabiana Santana; Barral, Aldina Maria Prado; Oliveira, Camila Indiani de

2012-01-01

To evaluate the process of implementing a quality management system in a basic research laboratory of a public institution, particularly considering the feasibility and impacts of this improvement. This was a prospective and qualitative study. We employed the norm "NIT DICLA 035--Princípios das Boas Práticas de Laboratório (BPL)" and auxiliary documents of Organisation for Economic Co-operation and Development to complement the planning and implementation of a Quality System, in a basic research laboratory. In parallel, we used the PDCA tool to define the goals of each phase of the implementation process. This study enabled the laboratory to comply with the NIT DICLA 035 norm and to implement this norm during execution of a research study. Accordingly, documents were prepared and routines were established such as the registration of non-conformities, traceability of research data and equipment calibration. The implementation of a quality system, the setting of a laboratory focused on basic research is feasible once certain structural changes are made. Importantly, impacts were noticed during the process, which could be related to several improvements in the laboratory routine.

Seawater-flooding events and impact on freshwater lenses of low-lying islands: Controlling factors, basic management and mitigation

NASA Astrophysics Data System (ADS)

Gingerich, Stephen B.; Voss, Clifford I.; Johnson, Adam G.

2017-08-01

An unprecedented set of hydrologic observations was collected after the Dec 2008 seawater-flooding event on Roi-Namur, Kwajalein Atoll, Republic of the Marshall Islands. By two days after the seawater flooding that occurred at the beginning of dry season, the observed salinity of water withdrawn by the island's main skimming well increased to 100% seawater concentration, but by ten days later already decreased to only 10-20% of seawater fraction. However, the damaging impact on the potability of the groundwater supply (when pumped water had concentrations above 1% seawater fraction) lasted 22 months longer. The data collected make possible analyses of the hydrologic factors that control recovery and management of the groundwater-supply quality on Roi-Namur and on similar low-lying islands. With the observed data as a guide, three-dimensional numerical-model simulation analyses reveal how recovery is controlled by the island's hydrology. These also allow evaluation of the efficacy of basic water-quality management/mitigation alternatives and elucidate how groundwater withdrawal and timing of the seawater-flooding event affect the length of recovery. Simulations show that, as might be expected, by adding surplus captured rainwater as artificial recharge, the freshwater-lens recovery period (after which potable groundwater may again be produced) can be shortened, with groundwater salinity remaining lower even during the dry season, a period during which no artificial recharge is applied. Simulations also show that the recovery period is not lengthened appreciably by groundwater withdrawals during recovery. Simulations further show that had the flooding event occurred at the start of the wet season, the recovery period would have been about 25% (5.5 months) shorter than actually occurred during the monitored flood that occurred at the dry-season start. Finally, analyses show that artificial recharge improves freshwater-lens water quality, making possible longer use of groundwater as a water supply throughout each year, even when no seawater flooding has occurred.

Seawater-flooding events and impact on freshwater lenses of low-lying islands: Controlling factors, basic management and mitigation

USGS Publications Warehouse

Gingerich, Stephen B.; Voss, Clifford I.; Johnson, Adam G.

2017-01-01

An unprecedented set of hydrologic observations was collected after the Dec 2008 seawater-flooding event on Roi-Namur, Kwajalein Atoll, Republic of the Marshall Islands. By two days after the seawater flooding that occurred at the beginning of dry season, the observed salinity of water withdrawn by the island’s main skimming well increased to 100% seawater concentration, but by ten days later already decreased to only 10–20% of seawater fraction. However, the damaging impact on the potability of the groundwater supply (when pumped water had concentrations above 1% seawater fraction) lasted 22 months longer. The data collected make possible analyses of the hydrologic factors that control recovery and management of the groundwater-supply quality on Roi-Namur and on similar low-lying islands.With the observed data as a guide, three-dimensional numerical-model simulation analyses reveal how recovery is controlled by the island’s hydrology. These also allow evaluation of the efficacy of basic water-quality management/mitigation alternatives and elucidate how groundwater withdrawal and timing of the seawater-flooding event affect the length of recovery. Simulations show that, as might be expected, by adding surplus captured rainwater as artificial recharge, the freshwater-lens recovery period (after which potable groundwater may again be produced) can be shortened, with groundwater salinity remaining lower even during the dry season, a period during which no artificial recharge is applied. Simulations also show that the recovery period is not lengthened appreciably by groundwater withdrawals during recovery. Simulations further show that had the flooding event occurred at the start of the wet season, the recovery period would have been about 25% (5.5 months) shorter than actually occurred during the monitored flood that occurred at the dry-season start. Finally, analyses show that artificial recharge improves freshwater-lens water quality, making possible longer use of groundwater as a water supply throughout each year, even when no seawater flooding has occurred.

Flight test and analyses of the B-1 structural mode control system at supersonic flight conditions

NASA Technical Reports Server (NTRS)

Wykes, J. H.; Kelpl, M. J.; Brosnan, M. J.

1983-01-01

A practical structural mode control system (SMCS) that could be turned on at takeoff and be left on for the entire flight was demonstrated. The SMCS appears to be more effective in damping the key fuselage bending modes at supersonic speeds than at the design point of Mach 0.85 (for fixed gains). The SMCS has an adverse effect on high frequency symmetric modes; however, this adverse effect did not make the system unstable and does not appear to affect ride quality performance. The vertical ride quality analyses indicate that the basic configuration without active systems is satisfactory for long term exposure. If clear air turbulence were to be encountered, indications are that the SMCS would be very effective in reducing the adverse accelerations. On the other hand, lateral ride quality analyses indicate that the aircraft with the SMCS on does not quite meet the long term exposure criteria, but would be satisfactory for shot term exposure at altitude. Again, the lateral SMCS was shown to be very effective in reducing peak lateral accelerations.

[Scientific substantiation of perfection of sanitary bacteriological monitoring in drinking water use].

PubMed

Rakhmanin, Iu A; Zhuravlev, P V; Aleshnia, V V; Panasovets, O P; Artemova, T Z; Zagaĭnova, A V; Gipp, E K

2014-01-01

Criterion of the epidemic safety of drinking water is the absence of pathogenic and potentially pathogenic microorganisms. Currently, water quality control is performed in terms of the index of total coliform bacteria (TCB). TCB index oriented to the labile lactose sign has not sufficient relevance in the determination of the degree of the epidemic danger in the water use in relation to Salmonella and potentially pathogenic microorganisms. The frequency of detection of GCB in standard quality of drinking water as well as the application of the methodology for the assessment of the microbial risk of the occurrence of bacterial intestinal infections with the use of integral index--GCB, provide the most reliable prediction of risk in the occurrence of water-caused intestinal infections and more objectively reflect the epidemiological importance of drinking water in their distribution among the population. Proceeding from the data obtained, it is advisable to carry out the quality control of drinking water with the use of the broader indicator index GCB- detected from basic signs of the Enterobacteriaceae family--glucose fermentation and oxidase test and oxidase test.

Reporting Experiments in Homeopathic Basic Research (REHBaR).

PubMed

Stock-Schröer, Beate

2015-10-01

The aim of this study was to develop a criteria catalogue serving as a guideline for authors to improve quality of Reporting Experiments in Homeopathic Basic Research (REHBaR). Main focus was in the field of biochemical and biological experiments. So far, there was no guideline for scientists and authors available, unlike criteria catalogues common in clinical research. A Delphi Process was conducted among experts who published experimental work within the last five years in this field. The process included a total of five rounds, three rounds of adjusting and phrasing plus two consensus conferences. A checklist of 23 items was achieved, augmented with detailed examples how to handle each item while compiling a publication. Background, objectives and possible hypotheses are necessary to be given in the part 'introduction'. The section 'materials and methods' is the most important part, where a detailed description of chosen controls, object of investigation, experimental setup, replication, parameters, intervention, allocation, blinding, and statistical methods is mandatory. In the 'results' section sufficient details on analysed data, descriptive as well as inferential are needed. Moreover, authors should discuss their results and interpret them in the context of current evidence. REHBaR was compiled for authors when preparing their manuscripts, and to be used by scientific journals in the reviewing process. Reporting experiments in basic research in homeopathy is an important issue to state the quality and validity of gained results. A guideline for REHBaR seemed to be the first step to come to a commitment what information is necessary to be given in a paper. More than that, the catalogue can serve as a statement what the standards in good basic research should be. Copyright © 2015 The Faculty of Homeopathy. Published by Elsevier Ltd. All rights reserved.

Substation Reactive Power Regulation Strategy

NASA Astrophysics Data System (ADS)

Zhang, Junfeng; Zhang, Chunwang; Ma, Daqing

2018-01-01

With the increasing requirements on the power supply quality and reliability of distribution network, voltage and reactive power regulation of substations has become one of the indispensable ways to ensure voltage quality and reactive power balance and to improve the economy and reliability of distribution network. Therefore, it is a general concern of the current power workers and operators that what kind of flexible and effective control method should be used to adjust the on-load tap-changer (OLTC) transformer and shunt compensation capacitor in a substation to achieve reactive power balance in situ, improve voltage pass rate, increase power factor and reduce active power loss. In this paper, based on the traditional nine-zone diagram and combining with the characteristics of substation, a fuzzy variable-center nine-zone diagram control method is proposed and used to make a comprehensive regulation of substation voltage and reactive power. Through the calculation and simulation of the example, this method is proved to have satisfactorily reconciled the contradiction between reactive power and voltage in real-time control and achieved the basic goal of real-time control of the substation, providing a reference value to the practical application of the substation real-time control method.

Complete Quantum Control of a Single Silicon-Vacancy Center in a Diamond Nanopillar

NASA Astrophysics Data System (ADS)

Zhang, Jingyuan Linda; Lagoudakis, Konstantinos G.; Tzeng, Yan-Kai; Dory, Constantin; Radulaski, Marina; Kelaita, Yousif; Shen, Zhi-Xun; Melosh, Nicholas A.; Chu, Steven; Vuckovic, Jelena

Coherent quantum control of a quantum bit (qubit) is an important step towards its use in a quantum network. SiV- center in diamond offers excellent physical qualities such as low inhomogeneous broadening, fast photon emission, and a large Debye-Waller factor, while the fast spin manipulation and techniques to extend the spin coherence time are under active investigation. Here, we demonstrate full coherent control over the state of a single SiV- center in a diamond nanopillar using ultrafast optical pulses. The high quality of the chemical vapor deposition grown SiV- centers allows us to coherently manipulate and quasi-resonantly read out the state of the single SiV- center. Moreover, the SiV- centers being coherently controlled are integrated into diamond nanopillar arrays in a site-controlled, individually addressable manner with high yield, low strain, and high spectral stability, which paves the way for scalable on chip optically accessible quantum system in a quantum photonic network. Financial support is provided by the DOE Office of Basic Energy Sciences, Division of Materials Sciences through Stanford Institute for Materials and Energy Sciences (SIMES) under contract DE-AC02-76SF00515.

Flight test of the X-29A at high angle of attack: Flight dynamics and controls

NASA Technical Reports Server (NTRS)

Bauer, Jeffrey E.; Clarke, Robert; Burken, John J.

1995-01-01

The NASA Dryden Flight Research Center has flight tested two X-29A aircraft at low and high angles of attack. The high-angle-of-attack tests evaluate the feasibility of integrated X-29A technologies. More specific objectives focus on evaluating the high-angle-of-attack flying qualities, defining multiaxis controllability limits, and determining the maximum pitch-pointing capability. A pilot-selectable gain system allows examination of tradeoffs in airplane stability and maneuverability. Basic fighter maneuvers provide qualitative evaluation. Bank angle captures permit qualitative data analysis. This paper discusses the design goals and approach for high-angle-of-attack control laws and provides results from the envelope expansion and handling qualities testing at intermediate angles of attack. Comparisons of the flight test results to the predictions are made where appropriate. The pitch rate command structure of the longitudinal control system is shown to be a valid design for high-angle-of-attack control laws. Flight test results show that wing rock amplitude was overpredicted and aileron and rudder effectiveness were underpredicted. Flight tests show the X-29A airplane to be a good aircraft up to 40 deg angle of attack.

How logical reasoning mediates the relation between lexical quality and reading comprehension.

PubMed

Segers, Eliane; Verhoeven, Ludo

The present study aimed to examine the role of logical reasoning in the relation between lexical quality and reading comprehension in 146 fourth grade Dutch children. We assessed their standardized reading comprehension measure, along with their decoding efficiency and vocabulary as measures of lexical quality, syllogistic reasoning as measure of (verbal) logical reasoning, and nonverbal reasoning as a control measure. Syllogistic reasoning was divided into a measure tapping basic, coherence inferencing skill using logical syllogisms, and a measure tapping elaborative inferencing skill using indeterminate syllogisms. Results showed that both types of syllogisms partly mediated the relation between lexical quality and reading comprehension, but also had a unique additional effect on reading comprehension. The indirect effect of lexical quality on reading comprehension via syllogisms was driven by vocabulary knowledge. It is concluded that measures of syllogistic reasoning account for higher-order thinking processes that are needed to make inferences in reading comprehension. The role of lexical quality appears to be pivotal in explaining the variation in reading comprehension both directly and indirectly via syllogistic reasoning.

A piloted simulator study on augmentation systems to improve helicopter flying qualities in terrain flight

NASA Technical Reports Server (NTRS)

Chen, R. T. N.; Talbot, P. D.; Gerdes, R. M.; Dugan, D. C.

1979-01-01

Four basic single-rotor helicopters, one teetering, on articulated, and two hingeless, which were found to have a variety of major deficiencies in a previous fixed-based simulator study, were selected as baseline configurations. The stability and control augmentation systems (SCAS) include simple control augmentation systems to decouple pitch and yaw responses due to collective input and to quicken the pitch and roll control responses; SCAS of rate-command type designed to optimize the sensitivity and damping and to decouple the pitch-roll due to aircraft angular tate; and attitude-command type SCAS. Pilot ratings and commentary are presented as well as performance data related to the task. SCAS control usages and their gain levels associated with specific rotor types are also discussed.

Introduction: Man and his total environment

NASA Technical Reports Server (NTRS)

1977-01-01

Environmental changes and the utilization of finite resources are analyzed. Beyond the satisfaction of basic physical needs, the advancement of civilization toward an ever-improving quality of like is likewise dependent upon mans' interaction with his entire environment. This larger system is controlled externally by electromagnetic and particle energy from the sun and internally by the dynamic interchange of energy between the solid earth, oceans, the atmosphere, and the magnetosphere. This exchange of energy that determines the structure of the earth's environemental system is evaluated.

Testing procedures for carbon fiber reinforced plastic components

NASA Technical Reports Server (NTRS)

Gosse, H. J.; Kaitatzidi, M.; Roth, S.

1977-01-01

Tests for studying the basic material are considered and quality control investigations involving preimpregnated materials (prepreg) are discussed. Attention is given to the prepreg area weight, the fiber area weight of prepregs, the resin content, volatile components, the effective thickness, resin flow, the resistance to bending strain, tensile strength, and shear strength. A description of tests conducted during the manufacturing process is also presented, taking into account X-ray methods, approaches of neutron radiography, ultrasonic procedures, resonance methods and impedance studies.

Quality improvement in neonatal digital radiography: implementing the basic quality improvement tools.

PubMed

Eslamy, Hedieh K; Newman, Beverley; Weinberger, Ed

2014-12-01

A quality improvement (QI) program may be implemented using the plan-do-study-act cycle (as a model for making improvements) and the basic QI tools (used to visually display and analyze variation in data). Managing radiation dose has come to the forefront as a safety goal for radiology departments. This is especially true in the pediatric population, which is more radiosensitive than the adult population. In this article, we use neonatal digital radiography to discuss developing a QI program with the principle goals of decreasing the radiation dose, decreasing variation in radiation dose, and optimizing image quality. Copyright © 2014 Elsevier Inc. All rights reserved.

Increasing intention to cook from basic ingredients: A randomised controlled study.

PubMed

Lavelle, Fiona; Hollywood, Lynsey; Caraher, Martin; McGowan, Laura; Spence, Michelle; Surgenor, Dawn; McCloat, Amanda; Mooney, Elaine; Raats, Monique; Dean, Moira

2017-09-01

The promotion of home cooking is a strategy used to improve diet quality and health. However, modern home cooking typically includes the use of processed food which can lead to negative outcomes including weight gain. In addition, interventions to improve cooking skills do not always explain how theory informed their design and implementation. The Behaviour Change Technique (BCT) taxonomy successfully employed in other areas has identified essential elements for interventions. This study investigated the effectiveness of different instructional modes for learning to cook a meal, designed using an accumulating number of BCTs, on participant's perceived difficulty, enjoyment, confidence and intention to cook from basic ingredients. 141 mothers aged between 20 and 39 years from the island of Ireland were randomised to one of four conditions based on BCTs (1) recipe card only [control condition]; (2) recipe card plus video modelling; (3) recipe card plus video prompting; (4) recipe card plus video elements. Participants rated their enjoyment, perceived difficulty, confidence and intention to cook again pre, mid and post experiment. Repeated one-way factorial ANOVAs, correlations and a hierarchical regression model were conducted. Despite no significant differences between the different conditions, there was a significant increase in enjoyment (P < 0.001), confidence (P < 0.001) and intention to cook from basics again (P < 0.001) and a decrease in perceived difficulty (P = 0.001) after the experiment in all conditions. Intention to cook from basics pre-experiment, and confidence and enjoyment (both pre and post experiment) significantly contributed to the final regression model explaining 42% of the variance in intention to cook from basics again. Cooking interventions should focus on practical cooking and increasing participants' enjoyment and confidence during cooking to increase intention to cook from basic ingredients at home. Copyright © 2017 Elsevier Ltd. All rights reserved.

The quality of sputum smear microscopy in public-private mix directly observed treatment laboratories in West Amhara region, Ethiopia.

PubMed

Manalebh, Almaw; Demissie, Meaza; Mekonnen, Daniel; Abera, Bayeh

2015-01-01

Ethiopia adopted Public-Private Mix Directly Observed Treatment Short Course Chemotherapy (PPM-DOTS) strategy for tuberculosis (TB) control program. Quality of sputum smear microscopy has paramount importance for tuberculosis control program in resource-poor countries like Ethiopia. A cross-sectional study was conducted to assess the quality of sputum smear microscopy in 37 Public-Private Mix laboratories in West Amhara, Ethiopia. The three external quality assessment methods (onsite evaluation, panel testing and blind rechecking) were employed. Onsite assessment revealed that 67.6% of PPM-DOTS laboratories were below the standard physical space (5 X 6) m2. The average monthly workload per laboratory technician was 19.5 (SD±2.9) slides with 12.8% positivity rate. The quality of Acid Fast Bacilli (AFB) staining reagents was sub-standard. The overall agreement for blind rechecking of 1,123 AFB slides was 99.4% (Kappa = 0.97). Reading of 370 AFB panel slides showed 3.5% false reading (Kappa = 0.92). Moreover, the consistency of reading scanty bacilli slides was lower (93%) compared to 1+, 2+ and 3+ bacilli. Based on blind rechecking and panel testing results, PPM-DOTS site laboratories showed good agreement with the reference laboratory. Physical space and qualities of AFB reagents would be areas of intervention to sustain the quality of sputum smear microscopy. Therefore, regular external quality assessment and provision of basic laboratory supplies for TB diagnosis would be the way forward to improve the quality of sputum smear microscopy services in PPM-DOTS laboratories.

The Quality of Sputum Smear Microscopy in Public-Private Mix Directly Observed Treatment Laboratories in West Amhara Region, Ethiopia

PubMed Central

Manalebh, Almaw; Demissie, Meaza; Mekonnen, Daniel; Abera, Bayeh

2015-01-01

Ethiopia adopted Public-Private Mix Directly Observed Treatment Short Course Chemotherapy (PPM-DOTS) strategy for tuberculosis (TB) control program. Quality of sputum smear microscopy has paramount importance for tuberculosis control program in resource-poor countries like Ethiopia. A cross-sectional study was conducted to assess the quality of sputum smear microscopy in 37 Public-Private Mix laboratories in West Amhara, Ethiopia. The three external quality assessment methods (onsite evaluation, panel testing and blind rechecking) were employed. Onsite assessment revealed that 67.6% of PPM-DOTS laboratories were below the standard physical space (5 X 6) m2. The average monthly workload per laboratory technician was 19.5 (SD±2.9) slides with 12.8% positivity rate. The quality of Acid Fast Bacilli (AFB) staining reagents was sub-standard. The overall agreement for blind rechecking of 1,123 AFB slides was 99.4% (Kappa = 0.97). Reading of 370 AFB panel slides showed 3.5% false reading (Kappa = 0.92). Moreover, the consistency of reading scanty bacilli slides was lower (93%) compared to 1+, 2+ and 3+ bacilli. Based on blind rechecking and panel testing results, PPM-DOTS site laboratories showed good agreement with the reference laboratory. Physical space and qualities of AFB reagents would be areas of intervention to sustain the quality of sputum smear microscopy. Therefore, regular external quality assessment and provision of basic laboratory supplies for TB diagnosis would be the way forward to improve the quality of sputum smear microscopy services in PPM-DOTS laboratories. PMID:25849516

Ozone - Current Air Quality Index

MedlinePlus

GO! Local Air Quality Conditions Zip Code: State : My Current Location Current AQI Forecast AQI Loop More Maps AQI: Good (0 - 50) ... resources for Hawaii residents and visitors more announcements Air Quality Basics Air Quality Index | Ozone | Particle Pollution | Smoke ...

Toward Defining and Improving Quality in Adult Basic Education: Issues and Challenges. Rutgers Invitational Symposium on Education Series

ERIC Educational Resources Information Center

Belzer, Alisa, Ed.

2007-01-01

This volume revisits, problematizes, and expands the meaning of quality in the context of adult basic education. Covering a wide range of relevant topics, it includes contributors from the realms of both policy and practice and encompasses both the major instructional areas--reading, writing, and mathematics--as well as larger issues of literacy,…

Education and the Consolidation of Democracy in Latin America: Innovations To Provide Quality Basic Education with Equity. Advocacy Series Education and Development 4.

ERIC Educational Resources Information Center

Reimers, Fernando

Three case studies show innovative education programs that provide quality basic education with equity. After explaining the significance of educational innovation of democracy in Latin America and the constraints to educational development, the investigation of the three programs follows. The program of Fe y Alegria (Faith and Joy) in 12…

From quality markers to data mining and intelligence assessment: A smart quality-evaluation strategy for traditional Chinese medicine based on quality markers.

PubMed

Bai, Gang; Zhang, Tiejun; Hou, Yuanyuan; Ding, Guoyu; Jiang, Min; Luo, Guoan

2018-05-15

The quality of traditional Chinese medicine (TCM) forms the foundation of its clinical efficacy. The standardization of TCM is the most important task of TCM modernization. In recent years, there has been great progress in the quality control of TCM. However, there are still many issues related to the current quality standards, and it is difficult to objectively evaluate and effectively control the quality of TCM. To face these challenge, we summarized the current quality marker (Q-marker) research based on its characteristics and benefits, and proposed a reasonable and intelligentized quality evaluation strategy for the development and application of Q-markers. Ultra-performance liquid chromatography-quadrupole/time-of-flight with partial least squares-discriminant analysis was suggested to screen the chemical markers from Chinese medicinal materials (CMM), and a bioactive-guided evaluation method was used to select the Q-markers. Near-infrared spectroscopy (NIRS), based on the distinctive wavenumber zones or points from the Q-markers, was developed for its determination. Then, artificial intelligence algorithms were used to clarify the complex relationship between the Q-markers and their integral functions. Internet and mobile communication technology helped us to perform remote analysis and determine the information feedback of test samples. The quality control research, evaluation, standard establishment and quality control of TCM must be based on the systematic analysis of Q-markers to study and describe the material basis of TCM efficacy, define the chemical markers in the plant body, and understand the process of herb drug acquisition, change and transmission laws affecting metabolism and exposure. Based on the advantages of chemometrics, new sensor technologies, including infrared spectroscopy, hyperspectral imaging, chemical imaging, electronic nose and electronic tongue, have become increasingly important in the quality evaluation of CMM. Inspired by the concept of Q-marker, the quantitation can be achieved with the help of artificial intelligence, and these subtle differences can be discovered, allowing the quantitative analysis by NIRS and providing a quick and easy detection method for CMM quality evaluations. The concept of Q-markers focused on unique CMM differences, dynamic changes and their transmission and traceability to establish an overall quality control and traceability system. Based on the basic attributes, an integration model and artificial intelligence research path was proposed, with the hope of providing new ideas and perspectives for the TCM quality management. Copyright © 2018 Elsevier GmbH. All rights reserved.

Basic Education and Policy Support Activity: Tools and Publications.

ERIC Educational Resources Information Center

Creative Associates International, Inc., Washington, DC.

The Basic Education and Policy Support (BEPS) Activity is a United States Agency for International Development (USAID)-sponsored, multi-year initiative designed to further improve the quality of, effectiveness of, and access to formal and nonformal basic education. This catalog is one element of the BEPS information dissemination process. The…

What's in Your Water? An Educator's Guide to Water Quality.

ERIC Educational Resources Information Center

Constabile, Kerry, Comp.; Craig, Heidi, Comp.; O'Laughlin, Laura, Comp.; Reiss, Anne Bei, Comp.; Spencer, Liz, Comp.

This guide provides basic information on the Clean Water Act, watersheds, and testing for water quality, and presents four science lesson plans on water quality. Activities include: (1) "Introduction to Water Quality"; (2) "Chemical Water Quality Testing"; (3) "Biological Water Quality Testing"; and (4) "What Can We Do?" (YDS)

Expanding Public/Private Partnerships For Improving Basic Education through School Sponsorship in the Dominican Republic. Final Report. Basic Education and Policy Support Activity.

ERIC Educational Resources Information Center

Craig, Patricia; Kane, Michael

The Basic Education and Policy Support Activity (BEPS), a new five-year initiative sponsored by United States Agency for International Development's (USAID) Center for Human Capacity Development, is designed to improve the quality, effectiveness, and access to formal and nonformal basic education. BEPS operates through both core funds and buy-ins…

Quality improvement in coronary care: analysis of sustainability and impact on adjacent clinical measures after a Swedish controlled, multicenter quality improvement collaborative.

PubMed

Carlhed, Rickard; Bellman, Christina; Bojestig, Mats; Bojö, Leif; Peterson, Anette; Lindahl, Bertil

2012-08-01

Quality Improvement in Coronary Care, a Swedish multicenter, controlled quality-improvement (QI) collaborative, has shown significant improvements in adherence to national guidelines for acute myocardial infarction, as well as improved clinical outcome. The objectives of this report were to describe the sustainability of the improvements after withdrawal of study support and a consolidation period of 3 months and to report whether improvements were disseminated to treatments and diagnostic procedures other than those primarily targeted. Multidisciplinary teams from 19 Swedish hospitals were educated in basic QI methodologies. Another 19 matched hospitals were included as blinded controls. All evaluations were made on the hospital level, and data were obtained from a national quality registry, Swedish Register of Information and Knowledge About Swedish Heart Intensive Care Admissions (RIKS-HIA). Sustainability indicators consisted of use of angiotensin-converting enzyme inhibitors, lipid-lowering therapy, clopidogrel, low-molecular weight heparin, and coronary angiography. Dissemination indicators were use of echocardiography, stress tests, and reperfusion therapy; time delays; and length of stay. At the reevaluation period of 6 months, the improvements at the QI intervention hospitals were sustained in all indicators but 1 (angiotensin-converting enzyme inhibitor). Between the 2 measurements, the control group improved significantly in all but 1 indicator (angiotensin-converting enzyme inhibitor). However, at the second measurement, the absolute adherence rates of the intervention hospitals were still numerically higher in all 5 indicators, and significantly so in 1 (clopidogrel). No significant changes were observed for the dissemination indicators. The combination of a systematic QI collaborative with a national, interactive quality registry might lead to substantial and sustained improvements in the quality of acute myocardial infarction care. However, to achieve disseminated improvements in adjacent clinical measures, those adjacent measures probably should be made explicit before any QI intervention. (J Am Heart Assoc. 2012;1:e000737 doi: 10.1161/JAHA.112.000737.).

Benefits and Limitations of DNA Barcoding and Metabarcoding in Herbal Product Authentication

PubMed Central

Raclariu, Ancuta Cristina; Heinrich, Michael; Ichim, Mihael Cristin

2017-01-01

Abstract Introduction Herbal medicines play an important role globally in the health care sector and in industrialised countries they are often considered as an alternative to mono‐substance medicines. Current quality and authentication assessment methods rely mainly on morphology and analytical phytochemistry‐based methods detailed in pharmacopoeias. Herbal products however are often highly processed with numerous ingredients, and even if these analytical methods are accurate for quality control of specific lead or marker compounds, they are of limited suitability for the authentication of biological ingredients. Objective To review the benefits and limitations of DNA barcoding and metabarcoding in complementing current herbal product authentication. Method Recent literature relating to DNA based authentication of medicinal plants, herbal medicines and products are summarised to provide a basic understanding of how DNA barcoding and metabarcoding can be applied to this field. Results Different methods of quality control and authentication have varying resolution and usefulness along the value chain of these products. DNA barcoding can be used for authenticating products based on single herbal ingredients and DNA metabarcoding for assessment of species diversity in processed products, and both methods should be used in combination with appropriate hyphenated chemical methods for quality control. Conclusions DNA barcoding and metabarcoding have potential in the context of quality control of both well and poorly regulated supply systems. Standardisation of protocols for DNA barcoding and DNA sequence‐based identification are necessary before DNA‐based biological methods can be implemented as routine analytical approaches and approved by the competent authorities for use in regulated procedures. © 2017 The Authors. Phytochemical Analysis Published by John Wiley & Sons Ltd. PMID:28906059

Benefits and Limitations of DNA Barcoding and Metabarcoding in Herbal Product Authentication.

PubMed

Raclariu, Ancuta Cristina; Heinrich, Michael; Ichim, Mihael Cristin; de Boer, Hugo

2018-03-01

Herbal medicines play an important role globally in the health care sector and in industrialised countries they are often considered as an alternative to mono-substance medicines. Current quality and authentication assessment methods rely mainly on morphology and analytical phytochemistry-based methods detailed in pharmacopoeias. Herbal products however are often highly processed with numerous ingredients, and even if these analytical methods are accurate for quality control of specific lead or marker compounds, they are of limited suitability for the authentication of biological ingredients. To review the benefits and limitations of DNA barcoding and metabarcoding in complementing current herbal product authentication. Recent literature relating to DNA based authentication of medicinal plants, herbal medicines and products are summarised to provide a basic understanding of how DNA barcoding and metabarcoding can be applied to this field. Different methods of quality control and authentication have varying resolution and usefulness along the value chain of these products. DNA barcoding can be used for authenticating products based on single herbal ingredients and DNA metabarcoding for assessment of species diversity in processed products, and both methods should be used in combination with appropriate hyphenated chemical methods for quality control. DNA barcoding and metabarcoding have potential in the context of quality control of both well and poorly regulated supply systems. Standardisation of protocols for DNA barcoding and DNA sequence-based identification are necessary before DNA-based biological methods can be implemented as routine analytical approaches and approved by the competent authorities for use in regulated procedures. © 2017 The Authors. Phytochemical Analysis Published by John Wiley & Sons Ltd. © 2017 The Authors. Phytochemical Analysis Published by John Wiley & Sons Ltd.

Evaluation of Various Radar Data Quality Control Algorithms Based on Accumulated Radar Rainfall Statistics

NASA Technical Reports Server (NTRS)

Robinson, Michael; Steiner, Matthias; Wolff, David B.; Ferrier, Brad S.; Kessinger, Cathy; Einaudi, Franco (Technical Monitor)

2000-01-01

The primary function of the TRMM Ground Validation (GV) Program is to create GV rainfall products that provide basic validation of satellite-derived precipitation measurements for select primary sites. A fundamental and extremely important step in creating high-quality GV products is radar data quality control. Quality control (QC) processing of TRMM GV radar data is based on some automated procedures, but the current QC algorithm is not fully operational and requires significant human interaction to assure satisfactory results. Moreover, the TRMM GV QC algorithm, even with continuous manual tuning, still can not completely remove all types of spurious echoes. In an attempt to improve the current operational radar data QC procedures of the TRMM GV effort, an intercomparison of several QC algorithms has been conducted. This presentation will demonstrate how various radar data QC algorithms affect accumulated radar rainfall products. In all, six different QC algorithms will be applied to two months of WSR-88D radar data from Melbourne, Florida. Daily, five-day, and monthly accumulated radar rainfall maps will be produced for each quality-controlled data set. The QC algorithms will be evaluated and compared based on their ability to remove spurious echoes without removing significant precipitation. Strengths and weaknesses of each algorithm will be assessed based on, their abilit to mitigate both erroneous additions and reductions in rainfall accumulation from spurious echo contamination and true precipitation removal, respectively. Contamination from individual spurious echo categories will be quantified to further diagnose the abilities of each radar QC algorithm. Finally, a cost-benefit analysis will be conducted to determine if a more automated QC algorithm is a viable alternative to the current, labor-intensive QC algorithm employed by TRMM GV.

BASIC Programming In Water And Wastewater Analysis

NASA Technical Reports Server (NTRS)

Dreschel, Thomas

1988-01-01

Collection of computer programs assembled for use in water-analysis laboratories. First program calculates quality-control parameters used in routine water analysis. Second calculates line of best fit for standard concentrations and absorbances entered. Third calculates specific conductance from conductivity measurement and temperature at which measurement taken. Fourth calculates any one of four types of residue measured in water. Fifth, sixth, and seventh calculate results of titrations commonly performed on water samples. Eighth converts measurements, to actual dissolved-oxygen concentration using oxygen-saturation values for fresh and salt water. Ninth and tenth perform calculations of two other common titrimetric analyses. Eleventh calculates oil and grease residue from water sample. Last two use spectro-photometric measurements of absorbance at different wavelengths and residue measurements. Programs included in collection written for Hewlett-Packard 2647F in H-P BASIC.

[A first step to teaching basic life support in schools: Training the teachers].

PubMed

Pichel López, María; Martínez-Isasi, Santiago; Barcala-Furelos, Roberto; Fernández-Méndez, Felipe; Vázquez Santamariña, David; Sánchez-Santos, Luis; Rodríguez-Nuñez, Antonio

2017-12-07

Teachers may have an essential role in basic life support (BLS) training in schoolchildren. However, few data are available about their BLS learning abilities. To quantitatively assess the quality of BLS when performed by school teachers after a brief and simple training program. A quasi-experimental study with no control group, and involving primary and secondary education teachers from four privately managed and public funded schools was conducted in 3 stages: 1st. A knowledge test, 2nd: BLS training, and 3rd: Performance test. Training included a 40minutes lecture and 80minutes hands-on session with the help feedback on the quality of the chest compressions. A total of 81 teachers were included, of which 60.5% were women. After training, the percentage of subjects able to perform the BLS sequence rose from 1.2% to 46% (P<.001). Chest compression quality also improved significantly in terms of: correct hands position (97.6 vs. 72.3%; P<.001), mean depth (48.1 vs. 38.8mm; P<.001), percentage that reached recommended depth (46.5 vs. 21.5%; P<.001), percentage of adequate decompression (78.7 vs. 61.2%; P<.05), and percentage of compressions delivered at recommended rate (64.2 vs. 26.9%; P<.001). After and brief and simple training program, teachers of privately managed public funded schools were able to perform the BLS sequence and to produce chest compressions with a quality similar to that obtained by staff with a duty to assist cardiac arrest victims. The ability of schoolteachers to deliver good-quality BLS is a pre-requisite to be engaged in BLS training for schoolchildren. Copyright © 2017. Publicado por Elsevier España, S.L.U.

Operational evaluation of rapid diagnostic testing for Ebola Virus Disease in Guinean laboratories

PubMed Central

Aho, Josephine; Franklin, Kristyn; Likofata, Jacques; Kamgang, Jean Baptiste; Keita, Sakoba; Koivogui, Lamine; Magassouba, N’Faly; Martel, Lise D.; Dahourou, Anicet George

2017-01-01

Background Rapid Diagnostic Tests (RDTs) for Ebola Virus Disease (EVD) at the point of care have the potential to increase access and acceptability of EVD testing and the speed of patient isolation and secure burials for suspect cases. A pilot program for EVD RDTs in high risk areas of Guinea was introduced in October 2015. This paper presents concordance data between EVD RDTs and PCR testing in the field as well as an assessment of the acceptability, feasibility, and quality assurance of the RDT program. Methods and findings Concordance data were compiled from laboratory surveillance databases. The operational measures of the laboratory-based EVD RDT program were evaluated at all 34 sentinel sites in Guinea through: (1) a technical questionnaire filled by the lab technicians who performed the RDTs, (2) a checklist filled by the evaluator during the site visits, and (3) direct observation of the lab technicians performing the quality control test. Acceptability of the EVD RDT was good for technicians, patients, and families although many technicians (69.8%) expressed concern for their safety while performing the test. The feasibility of the program was good based on average technician knowledge scores (6.6 out of 8) but basic infrastructure, equipment, and supplies were lacking. There was much room for improvement in quality assurance of the program. Conclusions The implementation of new diagnostics in weak laboratory systems requires general training in quality assurance, biosafety and communication with patients in addition to specific training for the new test. Corresponding capacity building in terms of basic equipment and a long-term commitment to transfer supervision and quality improvement to national public health staff are necessary for successful implementation. PMID:29190713

Operational evaluation of rapid diagnostic testing for Ebola Virus Disease in Guinean laboratories.

PubMed

VanSteelandt, Amanda; Aho, Josephine; Franklin, Kristyn; Likofata, Jacques; Kamgang, Jean Baptiste; Keita, Sakoba; Koivogui, Lamine; Magassouba, N'Faly; Martel, Lise D; Dahourou, Anicet George

2017-01-01

Rapid Diagnostic Tests (RDTs) for Ebola Virus Disease (EVD) at the point of care have the potential to increase access and acceptability of EVD testing and the speed of patient isolation and secure burials for suspect cases. A pilot program for EVD RDTs in high risk areas of Guinea was introduced in October 2015. This paper presents concordance data between EVD RDTs and PCR testing in the field as well as an assessment of the acceptability, feasibility, and quality assurance of the RDT program. Concordance data were compiled from laboratory surveillance databases. The operational measures of the laboratory-based EVD RDT program were evaluated at all 34 sentinel sites in Guinea through: (1) a technical questionnaire filled by the lab technicians who performed the RDTs, (2) a checklist filled by the evaluator during the site visits, and (3) direct observation of the lab technicians performing the quality control test. Acceptability of the EVD RDT was good for technicians, patients, and families although many technicians (69.8%) expressed concern for their safety while performing the test. The feasibility of the program was good based on average technician knowledge scores (6.6 out of 8) but basic infrastructure, equipment, and supplies were lacking. There was much room for improvement in quality assurance of the program. The implementation of new diagnostics in weak laboratory systems requires general training in quality assurance, biosafety and communication with patients in addition to specific training for the new test. Corresponding capacity building in terms of basic equipment and a long-term commitment to transfer supervision and quality improvement to national public health staff are necessary for successful implementation.

Sustainable Improvement of Urban River Network Water Quality and Flood Control Capacity by a Hydrodynamic Control Approach-Case Study of Changshu City

NASA Astrophysics Data System (ADS)

Xie, Chen; Yang, Fan; Liu, Guoqing; Liu, Yang; Wang, Long; Fan, Ziwu

2017-01-01

Water environment of urban rivers suffers degradation with the impacts of urban expansion, especially in Yangtze River Delta. The water area in cites decreased sharply, and some rivers were cut off because of estate development, which brings the problems of urban flooding, flow stagnation and water deterioration. The approach aims to enhance flood control capability and improve the urban river water quality by planning gate-pump stations surrounding the cities and optimizing the locations and functions of the pumps, sluice gates, weirs in the urban river network. These gate-pump stations together with the sluice gates and weirs guarantee the ability to control the water level in the rivers and creating hydraulic gradient artificially according to mathematical model. Therefore the flow velocity increases, which increases the rate of water exchange, the DO concentration and water body self-purification ability. By site survey and prototype measurement, the river problems are evaluated and basic data are collected. The hydrodynamic model of the river network is established and calibrated to simulate the scenarios. The schemes of water quality improvement, including optimizing layout of the water distribution projects, improvement of the flow discharge in the river network and planning the drainage capacity are decided by comprehensive Analysis. Finally the paper introduces the case study of the approach in Changshu City, where the approach is successfully implemented.

A simplified rotor system mathematical model for piloted flight dynamics simulation

NASA Technical Reports Server (NTRS)

Chen, R. T. N.

1979-01-01

The model was developed for real-time pilot-in-the-loop investigation of helicopter flying qualities. The mathematical model included the tip-path plane dynamics and several primary rotor design parameters, such as flapping hinge restraint, flapping hinge offset, blade Lock number, and pitch-flap coupling. The model was used in several exploratory studies of the flying qualities of helicopters with a variety of rotor systems. The basic assumptions used and the major steps involved in the development of the set of equations listed are described. The equations consisted of the tip-path plane dynamic equation, the equations for the main rotor forces and moments, and the equation for control phasing required to achieve decoupling in pitch and roll due to cyclic inputs.

A procedure for testing the quality of LANDSAT atmospheric correction algorithms

NASA Technical Reports Server (NTRS)

Dias, L. A. V. (Principal Investigator); Vijaykumar, N. L.; Neto, G. C.

1982-01-01

There are two basic methods for testing the quality of an algorithm to minimize atmospheric effects on LANDSAT imagery: (1) test the results a posteriori, using ground truth or control points; (2) use a method based on image data plus estimation of additional ground and/or atmospheric parameters. A procedure based on the second method is described. In order to select the parameters, initially the image contrast is examined for a series of parameter combinations. The contrast improves for better corrections. In addition the correlation coefficient between two subimages, taken at different times, of the same scene is used for parameter's selection. The regions to be correlated should not have changed considerably in time. A few examples using this proposed procedure are presented.

The MPC&A Questionnaire

DOE Office of Scientific and Technical Information (OSTI.GOV)

Powell, Danny H; Elwood Jr, Robert H

The questionnaire is the instrument used for recording performance data on the nuclear material protection, control, and accountability (MPC&A) system at a nuclear facility. The performance information provides a basis for evaluating the effectiveness of the MPC&A system. The goal for the questionnaire is to provide an accurate representation of the performance of the MPC&A system as it currently exists in the facility. Performance grades for all basic MPC&A functions should realistically reflect the actual level of performance at the time the survey is conducted. The questionnaire was developed after testing and benchmarking the material control and accountability (MC&A) systemmore » effectiveness tool (MSET) in the United States. The benchmarking exercise at the Idaho National Laboratory (INL) proved extremely valuable for improving the content and quality of the early versions of the questionnaire. Members of the INL benchmark team identified many areas of the questionnaire where questions should be clarified and areas where additional questions should be incorporated. The questionnaire addresses all elements of the MC&A system. Specific parts pertain to the foundation for the facility's overall MPC&A system, and other parts pertain to the specific functions of the operational MPC&A system. The questionnaire includes performance metrics for each of the basic functions or tasks performed in the operational MPC&A system. All of those basic functions or tasks are represented as basic events in the MPC&A fault tree. Performance metrics are to be used during completion of the questionnaire to report what is actually being done in relation to what should be done in the performance of MPC&A functions.« less

Digital Microwave System Design Guide.

DTIC Science & Technology

1984-02-01

traffic analysis is a continuous effort, setting parameters for subsequent stages of expansion after the system design is finished. 2.1.3 Quality of...operational structure of the user for whom he is providing service. 2.2.3 Quality of Service. In digital communications, the basic performance parameter ...the basic interpretation of system performance is measured in terms of a single parameter , throughput. Throughput can be defined as the number of

Perception of Colombian Students from a Bachelor in Basic Education with Emphasis on Arts, about the Educational Quality of the Program They Study

ERIC Educational Resources Information Center

Aldemar, Segura-Escobar; Alfonso, López-Vega

2018-01-01

This article presents the results of a study about the attitudes by the learners from a bachelor in basic education with emphasis on arts, in Colombia, regarding the quality of academic management of this program. The importance of this study appears considers that its results will be useful to contrast the agreement or disagreement between the…

Injury during U.S. Army basic combat training: a systematic review of risk factor studies.

PubMed

Bulzacchelli, Maria T; Sulsky, Sandra I; Rodriguez-Monguio, Rosa; Karlsson, Lee H; Hill, Maj Owen T

2014-12-01

Approximately one quarter of men and half of women in U.S. Army basic combat training experience an injury. Preventing basic combat training-related injuries would reduce associated human and economic costs and discharges from the Army. Identification of risk factors for such injuries is a crucial step toward their prevention. Although some research has begun to address this need, prior studies of risk factors for training-related injury have not been reviewed systematically. This study systematically reviews the literature on risk factors for injury during U.S. Army basic combat training. Original studies of risk factors for injury during U.S. Army basic combat training published since 1990 in peer-reviewed journals were identified using PubMed and manual searches of reference lists. This search was last performed in May 2013. Nineteen studies met the inclusion criteria. Methodologic quality and potential for bias were assessed. The findings of 11 studies deemed to be of high or medium quality were synthesized to determine the level of evidence supporting the association between each risk factor studied and risk of injury during basic combat training. Quality assessment and evidence synthesis were performed from June to September 2013. There is strong or moderate evidence supporting association of older age, history of smoking, and self-rated low physical activity level prior to basic combat training with increased risk of training-related injury among male trainees. There is limited, mixed, or insufficient evidence to identify risk factors for injury among female trainees. Copyright © 2014 American Journal of Preventive Medicine. All rights reserved.

Accreditation and Institutional Research: The Traditional Role and New Dimensions

ERIC Educational Resources Information Center

Brittingham, Barbara; O'Brien, Patricia M.; Alig, Julie L.

2008-01-01

American regional accreditation serves two basic functions: quality assurance and quality improvement. Through its public function of quality assurance, accreditation signals to prospective students, parents, employers, and others that the institution meets fundamental standards of quality. Through its private function of quality improvement,…

Ground-water quality in the Santa Rita, Buellton, and Los Olivos hydrologic subareas of the Santa Ynez River basin, Santa Barbara County, California

USGS Publications Warehouse

Hamlin, S.N.

1985-01-01

Groundwater quality in the upper Santa Ynez River Valley in Santa Barbara County has degraded due to both natural and anthropogenic causes. The semiarid climate and uneven distribution of rainfall has limited freshwater recharge and caused salt buildup in water supplies. Tertiary rocks supply mineralized water. Agricultural activities (irrigation return flow containing fertilizers and pesticides, cultivation, feedlot waste disposal) are a primary cause of water quality degradation. Urban development, which also causes water quality degradation (introduced contaminants, wastewater disposal, septic system discharge, and land fill disposal of waste), has imposed stricter requirements on water supply quality. A well network was designed to monitor changes in groundwater quality related to anthropogenic activities. Information from this network may aid in efficient management of the groundwater basins as public water supplies, centered around three basic goals. First is to increase freshwater recharge to the basins by conjunctive surface/groundwater use and surface-spreading techniques. Second is to optimize groundwater discharge by efficient timing and spacing of pumping. Third is to control and reduce sources of groundwater contamination by regulating wastewater quality and distribution and, preferably, by exporting wastewaters from the basin. (USGS)

Evaluation of the Impacts of Land Use on Water Quality: A Case Study in The Chaohu Lake Basin

PubMed Central

Yan, Haiming; Wu, Feng; Deng, Xiangzheng

2013-01-01

It has been widely accepted that there is a close relationship between the land use type and water quality. There have been some researches on this relationship from the perspective of the spatial configuration of land use in recent years. This study aims to analyze the influence of various land use types on the water quality within the Chaohu Lake Basin based on the water quality monitoring data and RS data from 2000 to 2008, with the small watershed as the basic unit of analysis. The results indicated that there was significant negative correlation between forest land and grassland and the water pollution, and the built-up area had negative impacts on the water quality, while the influence of the cultivated land on the water quality was very complex. Besides, the impacts of the landscape diversity on the indicators of water quality within the watershed were also analyzed, the result of which indicated there was a significant negative relationship between them. The results can provide important scientific reference for the local land use optimization and water pollution control and guidance for the formulation of policies to coordinate the exploitation and protection of the water resource. PMID:23970833

Climatological Processing and Product Development for the TRMM Ground Validation Program

NASA Technical Reports Server (NTRS)

Marks, D. A.; Kulie, M. S.; Robinson, M.; Silberstein, D. S.; Wolff, D. B.; Ferrier, B. S.; Amitai, E.; Fisher, B.; Wang, J.; Augustine, D.;

Walk-in clinics versus physician offices and emergency rooms for urgent care and chronic disease management.

PubMed

Chen, Connie E; Chen, Christopher T; Hu, Jia; Mehrotra, Ateev

2017-02-17

Walk-in clinics are growing in popularity around the world as a substitute for traditional medical care delivered in physician offices and emergency rooms, but their clinical efficacy is unclear. To assess the quality of care and patient satisfaction of walk-in clinics compared to that of traditional physician offices and emergency rooms for people who present with basic medical complaints for either acute or chronic issues. We searched CENTRAL, MEDLINE, Embase, six other databases, and two trials registers on 22 March 2016 together with reference checking, citation searching, and contact with study authors to identify additional studies. We applied no restrictions on language, publication type, or publication year. Study design: randomized trials, non-randomized trials, and controlled before-after studies. standalone physical clinics not requiring advance appointments or registration, that provided basic medical care without expectation of follow-up. Comparisons: traditional primary care practices or emergency rooms. We used standard methodological procedures expected by Cochrane and the Cochrane Effective Practice and Organisation of Care (EPOC) Group. The literature search identified 6587 citations, of which we considered 65 to be potentially relevant. We reviewed the abstracts of all 65 potentially relevant studies and retrieved the full texts of 12 articles thought to fit our study criteria. However, following independent author assessment of the full texts, we excluded all 12 articles. Controlled trial evidence about the mortality, morbidity, quality of care, and patient satisfaction of walk-in clinics is currently not available.

Impact of the basic state and MJO representation on MJO Pacific teleconnections in GCMs

NASA Astrophysics Data System (ADS)

Henderson, S. A.; Maloney, E. D.; Son, S. W.

2017-12-01

Teleconnection patterns induced by the Madden-Julian Oscillation (MJO) are known to significantly alter extratropical weather and climate patterns. However, accurate MJO representation has been difficult for many General Circulation Models (GCMs). Furthermore, many GCMs contain large basic state biases. These issues present challenges to the simulation of MJO teleconnections and, in turn, their associated extratropical impacts. This study examines the impacts of basic state quality and MJO representation on the quality of MJO teleconnection patterns in GCMs from phase 5 of the Coupled Model Intercomparison Project (CMIP5). Results suggest that GCMs assessed to have a good MJO but with large basic state biases have similarly low skill in reproducing MJO teleconnections as GCMs with poor MJO representation. In the good MJO models examined, poor teleconnection quality is associated with large errors in the zonal extent of the Pacific subtropical jet. Whereas the horizontal structure of MJO heating in the Indo-Pacific region is found to have modest impacts on the teleconnection patterns, results suggest that MJO heating east of the dateline can alter the teleconnection pattern characteristics over North America. These findings suggest that in order to accurately simulate the MJO teleconnection patterns and associated extratropical impacts, both the MJO and the basic state must be well represented.

Cation-exchange high-performance liquid chromatography for variant hemoglobins and HbF/A2: What must hematopathologists know about methodology?

PubMed

Sharma, Prashant; Das, Reena

2016-03-26

Cation-exchange high-performance liquid chromatography (CE-HPLC) is a widely used laboratory test to detect variant hemoglobins as well as quantify hemoglobins F and A2 for the diagnosis of thalassemia syndromes. It's versatility, speed, reproducibility and convenience have made CE-HPLC the method of choice to initially screen for hemoglobin disorders. Despite its popularity, several methodological aspects of the technology remain obscure to pathologists and this may have consequences in specific situations. This paper discusses the basic principles of the technique, the initial quality control steps and the interpretation of various controls and variables that are available on the instrument output. Subsequent sections are devoted to methodological considerations that arise during reporting of cases. For instance, common problems of misidentified peaks, totals crossing 100%, causes of total area being above or below acceptable limits and the importance of pre-integration region peaks are dealt with. Ultimately, CE-HPLC remains an investigation, the reporting of which combines in-depth knowledge of the biological basics with more than a working knowledge of the technological aspects of the technique.

Design of Low Complexity Model Reference Adaptive Controllers

NASA Technical Reports Server (NTRS)

Hanson, Curt; Schaefer, Jacob; Johnson, Marcus; Nguyen, Nhan

2012-01-01

Flight research experiments have demonstrated that adaptive flight controls can be an effective technology for improving aircraft safety in the event of failures or damage. However, the nonlinear, timevarying nature of adaptive algorithms continues to challenge traditional methods for the verification and validation testing of safety-critical flight control systems. Increasingly complex adaptive control theories and designs are emerging, but only make testing challenges more difficult. A potential first step toward the acceptance of adaptive flight controllers by aircraft manufacturers, operators, and certification authorities is a very simple design that operates as an augmentation to a non-adaptive baseline controller. Three such controllers were developed as part of a National Aeronautics and Space Administration flight research experiment to determine the appropriate level of complexity required to restore acceptable handling qualities to an aircraft that has suffered failures or damage. The controllers consist of the same basic design, but incorporate incrementally-increasing levels of complexity. Derivations of the controllers and their adaptive parameter update laws are presented along with details of the controllers implementations.

Quality control in urodynamics and the role of software support in the QC procedure.

PubMed

Hogan, S; Jarvis, P; Gammie, A; Abrams, P

2011-11-01

This article aims to identify quality control (QC) best practice, to review published QC audits in order to identify how closely good practice is followed, and to carry out a market survey of the software features that support QC offered by urodynamics machines available in the UK. All UK distributors of urodynamic systems were contacted and asked to provide information on the software features relating to data quality of the products they supply. The results of the market survey show that the features offered by manufacturers differ greatly. Automated features, which can be turned off in most cases, include: cough recognition, detrusor contraction detection, and high pressure alerts. There are currently no systems that assess data quality based on published guidelines. A literature review of current QC guidelines for urodynamics was carried out; QC audits were included in the literature review to see how closely guidelines were being followed. This review highlights the fact that basic QC is not being carried out effectively by urodynamicists. Based on the software features currently available and the results of the literature review there is both the need and capacity for a greater degree of automation in relation to urodynamic data quality and accuracy assessment. Some progress has been made in this area and certain manufacturers have already developed automated cough detection. Copyright © 2011 Wiley Periodicals, Inc.

[Quality evaluation of the orthodontic practice for certification by ISO 9001. A procedure beneficial for medical, medico-dental or hospital service].

PubMed

Becker, G

2001-01-01

The accreditation of the ISO 9001 certification (ISO = International Standard Organization) is an external evaluation procedure carried out by independent experts, whose object is the analysis of the operational methods and practices of a medical care facility (e.g. hospital, private clinic, general practitioner's or dentist's practice) which decided to assume the concept, implementation and control of its own quality policy. The whole accreditation procedure represents the basic structure of a continuous dynamic progressiveness within a cabinet eager to offer outstanding quality. Moreover, it guarantees active and voluntary participation of every single member of the medical administration or technical team involved in the realization of this primary objective. In other words, we are talking about a very strong dynamic innovation leading to a change of views and the improvement of communication means, while simultaneously enhancing the security and quality aspects of medical care. The continuous guarantee of high quality medical care calls for precise planning and systematization of actions. First of all, these actions are defined, analyzed and listed in precise work procedures. As they are defined with the agreement of the whole team, they implicate respect and self control. This requires of course transparency of the treatment methods, whose different steps and procedures are described in detail in a logogramm set up in common.

Information needs related to extension service and community outreach.

PubMed

Bottcher, Robert W

2003-06-01

Air quality affects everyone. Some people are affected by air quality impacts, regulations, and technological developments in several ways. Stakeholders include the medical community, ecologists, government regulators, industries, technology providers, academic professionals, concerned citizens, the news media, and elected officials. Each of these groups may perceive problems and opportunities differently, but all need access to information as it is developed. The diversity and complexity of air quality problems contribute to the challenges faced by extension and outreach professionals who must communicate with stakeholders having diverse backgrounds. Gases, particulates, biological aerosols, pathogens, and odors all require expensive and relatively complex technology to measure and control. Economic constraints affect the ability of regulators and others to measure air quality, and industry and others to control it. To address these challenges, while communicating air quality research results and concepts to stakeholders, three areas of information needs are evident. (1) A basic understanding of the fundamental concepts regarding air pollutants and their measurement and control is needed by all stakeholders; the Extension Specialist, to be effective, must help people move some distance up the learning curve. (2) Each problem or set of problems must be reasonably well defined since comprehensive solution of all problems simultaneously may not be feasible; for instance, the solution of an odor problem associated with animal production may not address atmospheric effects due to ammonia emissions. (3) The integrity of the communication process must be preserved by avoiding prejudice and protectionism; although stakeholders may seek to modify information to enhance their interests, extension and outreach professionals must be willing to present unwelcome information or admit to a lack of information. A solid grounding in fundamental concepts, careful and fair problem definition, and a resolute commitment to integrity and credibility will enable effective communication of air quality information to and among diverse stakeholders.

Evaluation of feedback interventions for improving the quality assurance of cancer screening in Japan: study design and report of the baseline survey.

PubMed

Machii, Ryoko; Saika, Kumiko; Higashi, Takahiro; Aoki, Ayako; Hamashima, Chisato; Saito, Hiroshi

2012-02-01

The importance of quality assurance in cancer screening has recently gained increasing attention in Japan. To evaluate and improve quality, checklists and process indicators have been developed. To explore effective methods of enhancing quality in cancer screening, we started a randomized control study of the methods of evaluation and feedback for cancer control from 2009 to 2014. We randomly assigned 1270 municipal governments, equivalent to 71% of all Japanese municipal governments that performed screening programs, into three groups. The high-intensity intervention groups (n = 425) were individually evaluated using both checklist performance and process indicator values, while the low-intensity intervention groups (n= 421) were individually evaluated on the basis of only checklist performance. The control group (n = 424) received only a basic report that included the national average of checklist performance scores. We repeated the survey for each municipality's quality assurance activity performance using checklists and process indicators. In this paper, we report our study design and the result of the baseline survey. The checklist adherence rates were especially low in the checklist elements related to invitation of individuals, detailed monitoring of process indicators such as cancer detection rates according to screening histories and appropriate selection of screening facilities. Screening rate and percentage of examinees who underwent detailed examination tended to be lower for large cities when compared with smaller cities for all cancer sites. The performance of the Japanese cancer screening program in 2009 was identified for the first time.

Quality of basic maternal care functions in health facilities of five African countries: an analysis of national health system surveys.

PubMed

Kruk, Margaret E; Leslie, Hannah H; Verguet, Stéphane; Mbaruku, Godfrey M; Adanu, Richard M K; Langer, Ana

2016-11-01

Global efforts to increase births at health-care facilities might not reduce maternal or newborn mortality if quality of care is insufficient. However, little systematic evidence exists for the quality at health facilities caring for women and newborn babies in low-income countries. We analysed the quality of basic maternal care functions and its association with volume of deliveries and surgical capacity in health-care facilities in five sub-Saharan African countries. In this analysis, we combined nationally representative health system surveys (Service Provision Assessments by the Demographic and Health Survery Programme) with data for volume of deliveries and quality of delivery care from Kenya, Namibia, Rwanda, Tanzania, and Uganda. We measured the quality of basic maternal care functions in delivery facilities using an index of 12 indicators of structure and processes of care, including infrastructure and use of evidence-based routine and emergency care interventions. We regressed the quality index on volume of births and confounders (public or privately managed, availability of antiretroviral therapy services, availability of skilled staffing, and country) stratified by facility type: primary (no caesarean capacity) or secondary (has caesarean capacity) care facilities. The Harvard University Human Research Protection Program approved this analysis as exempt from human subjects review. The national surveys were completed between April, 2006, and May, 2010. Our sample consisted of 1715 (93%) of 1842 health-care facilities that provided normal delivery service, after exclusion of facilities with missing (n=126) or invalid (n=1) data. 1511 (88%) study facilities (site of 276 965 [44%] of 622 864 facility births) did not have caesarean section capacity (primary care facilities). Quality of basic maternal care functions was substantially lower in primary (index score 0·38) than secondary care facilities (0·77). Low delivery volume was consistently associated with poor quality, with differences in quality between the lowest versus highest volume facilities of -0·22 (95% CI -0·26 to -0·19) in primary care facilities and -0·17 (-0·21 to -0·11) in secondary care facilities. More than 40% of facility deliveries in these five African countries occurred in primary care facilities, which scored poorly on basic measures of maternal care quality. Facilities with caesarean section capacity, particularly those with birth volumes higher than 500 per year, had higher scores for maternal care quality. Low-income and middle-income countries should systematically assess and improve the quality of delivery care in health facilities to accelerate reduction of maternal and newborn deaths. None. Copyright © 2016 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY-NC-ND license. Published by Elsevier Ltd.. All rights reserved.

Air Quality Modeling | Air Quality Planning & Standards | US ...

EPA Pesticide Factsheets

2016-06-08

The basic mission of the Office of Air Quality Planning and Standards is to preserve and improve the quality of our nation's air. One facet of accomplishing this goal requires that new and existing air pollution sources be modeled for compliance with the National Ambient Air Quality Standards (NAAQS).

Quality assurance and quality control of geochemical data—A primer for the research scientist

USGS Publications Warehouse

Geboy, Nicholas J.; Engle, Mark A.

2011-01-01

Geochemistry is a constantly expanding science. More and more, scientists are employing geochemical tools to help answer questions about the Earth and earth system processes. Scientists may assume that the responsibility of examining and assessing the quality of the geochemical data they generate is not theirs but rather that of the analytical laboratories to which their samples have been submitted. This assumption may be partially based on knowledge about internal and external quality assurance and quality control (QA/QC) programs in which analytical laboratories typically participate. Or there may be a perceived lack of time or resources to adequately examine data quality. Regardless of the reason, the lack of QA/QC protocols can lead to the generation and publication of erroneous data. Because the interpretations drawn from the data are primary products to U.S. Geological Survey (USGS) stakeholders, the consequences of publishing erroneous results can be significant. The principal investigator of a scientific study ultimately is responsible for the quality and interpretation of the project's findings, and thus must also play a role in the understanding, implementation, and presentation of QA/QC information about the data. Although occasionally ignored, QA/QC protocols apply not only to procedures in the laboratory but also in the initial planning of a research study and throughout the life of the project. Many of the tenets of developing a sound QA/QC program or protocols also parallel the core concepts of developing a good study: What is the main objective of the study? Will the methods selected provide data of enough resolution to answer the hypothesis? How should samples be collected? Are there known or unknown artifacts or contamination sources in the sampling and analysis methods? Assessing data quality requires communication between the scientists responsible for designing the study and those collecting samples, analyzing samples, treating data, and interpreting results. This primer has been developed to provide basic information and guidance about developing QA/QC protocols for geochemical studies. It is not intended to be a comprehensive guide but rather an introduction to key concepts tied to a list of relevant references for further reading. The guidelines are presented in stepwise order beginning with presampling considerations and continuing through final data interpretation. The goal of this primer is to outline basic QA/QC practices that scientists can use before, during, and after chemical analysis to ensure the validity of the data they collect with the goal of providing defendable results and conclusions.

The Implementation and Results of the Academic Administration System in the Center for Education Quality Development Network under the Jurisdiction of the Office of the Basic Education Commission of Thailand

ERIC Educational Resources Information Center

Ruanglae, Phumiphat; Sirisuthi, Chaiyuth; Weangsamoot, Visoot

2017-01-01

This purpose of this study was twofold. The researcher aimed to investigate the implementation results of the academic administration system in the Center for Education Quality Development Network under the jurisdiction of the Office of the Basic Education Commission of Thailand and to design the Actions Research which can be effectively utilized…

[Effects of sexual maturation on body composition, dermatoglyphics, somatotype and basic physical qualities of adolescents].

PubMed

Linhares, Renato Vidal; Matta, Marcelo de Oliveira; Lima, Jorge R P; Dantas, Paulo M Silva; Costa, Mônica Barros; Fernandes Filho, José

2009-02-01

Describe the characteristics of body composition, somatotype, basic physical qualities, dermatoglyphics and bone age regarding sexual maturation stages of boys. A transversal study was carried out in 136 boys, between 10 and 14 years of age. Clinical assessment, physical examination and radiography of wrists and hands to calculate bone age were performed. A tendency of increasing total body mass, stature, body mass index, body bone diameters and muscle circumferences and basic physical qualities was found with the advancing of puberty. No differences were found in dermatoglyphics and somatotype between different stages of puberty maturation. Due to the changes in important parameters of physical training that occur during puberty, it can be concluded that the selection of children and adolescents for sport training and competitions should be based not only on chronological age but also, and mainly on sexual maturation, for better physical assessment and appropriate training for this population.

Linking Narcissism, Motivation, and Doping Attitudes in Sport: A Multilevel Investigation Involving Coaches and Athletes.

PubMed

Matosic, Doris; Ntoumanis, Nikos; Boardley, Ian David; Stenling, Andreas; Sedikides, Constantine

2016-12-01

Research on coaching (Bartholomew, Ntoumanis, & Thøgersen-Ntoumani, 2009) has shown that coaches can display controlling behaviors that have detrimental effects on athletes' basic psychological needs and quality of sport experiences. The current study extends this literature by considering coach narcissism as a potential antecedent of coaches' controlling behaviors. Further, the study tests a model linking coaches' (n = 59) own reports of narcissistic tendencies with athletes' (n = 493) perceptions of coach controlling behaviors, experiences of need frustration, and attitudes toward doping. Multilevel path analysis revealed that coach narcissism was directly and positively associated with athletes' perceptions of controlling behaviors and was indirectly and positively associated with athletes' reports of needs frustration. In addition, athletes' perceptions of coach behaviors were positively associated-directly and indirectly-with attitudes toward doping. The findings advance understanding of controlling coach behaviors, their potential antecedents, and their associations with athletes' attitudes toward doping.

Quantitative polymerase chain reaction (PCR) for detection of aquatic animal pathogens in a diagnostic laboratory setting

USGS Publications Warehouse

Purcell, Maureen K.; Getchell, Rodman G.; McClure, Carol A.; Weber, S.E.; Garver, Kyle A.

2011-01-01

Real-time, or quantitative, polymerase chain reaction (qPCR) is quickly supplanting other molecular methods for detecting the nucleic acids of human and other animal pathogens owing to the speed and robustness of the technology. As the aquatic animal health community moves toward implementing national diagnostic testing schemes, it will need to evaluate how qPCR technology should be employed. This review outlines the basic principles of qPCR technology, considerations for assay development, standards and controls, assay performance, diagnostic validation, implementation in the diagnostic laboratory, and quality assurance and control measures. These factors are fundamental for ensuring the validity of qPCR assay results obtained in the diagnostic laboratory setting.

Design on the x-ray oral digital image display card

NASA Astrophysics Data System (ADS)

Wang, Liping; Gu, Guohua; Chen, Qian

2009-10-01

According to the main characteristics of X-ray imaging, the X-ray display card is successfully designed and debugged using the basic principle of correlated double sampling (CDS) and combined with embedded computer technology. CCD sensor drive circuit and the corresponding procedures have been designed. Filtering and sampling hold circuit have been designed. The data exchange with PC104 bus has been implemented. Using complex programmable logic device as a device to provide gating and timing logic, the functions which counting, reading CPU control instructions, corresponding exposure and controlling sample-and-hold have been completed. According to the image effect and noise analysis, the circuit components have been adjusted. And high-quality images have been obtained.

Algorithmic analysis of relational learning processes in instructional technology: Some implications for basic, translational, and applied research.

PubMed

McIlvane, William J; Kledaras, Joanne B; Gerard, Christophe J; Wilde, Lorin; Smelson, David

2018-07-01

A few noteworthy exceptions notwithstanding, quantitative analyses of relational learning are most often simple descriptive measures of study outcomes. For example, studies of stimulus equivalence have made much progress using measures such as percentage consistent with equivalence relations, discrimination ratio, and response latency. Although procedures may have ad hoc variations, they remain fairly similar across studies. Comparison studies of training variables that lead to different outcomes are few. Yet to be developed are tools designed specifically for dynamic and/or parametric analyses of relational learning processes. This paper will focus on recent studies to develop (1) quality computer-based programmed instruction for supporting relational learning in children with autism spectrum disorders and intellectual disabilities and (2) formal algorithms that permit ongoing, dynamic assessment of learner performance and procedure changes to optimize instructional efficacy and efficiency. Because these algorithms have a strong basis in evidence and in theories of stimulus control, they may have utility also for basic and translational research. We present an overview of the research program, details of algorithm features, and summary results that illustrate their possible benefits. It also presents arguments that such algorithm development may encourage parametric research, help in integrating new research findings, and support in-depth quantitative analyses of stimulus control processes in relational learning. Such algorithms may also serve to model control of basic behavioral processes that is important to the design of effective programmed instruction for human learners with and without functional disabilities. Copyright © 2018 Elsevier B.V. All rights reserved.

Method for Examination and Documentation of Basic Information and Metadata from Published Reports Relevant to the Study of Stormwater Runoff Quality

USGS Publications Warehouse

Dionne, Shannon G.; Granato, Gregory E.; Tana, Cameron K.

1999-01-01

A readily accessible archive of information that is valid, current, and technically defensible is needed to make informed highway-planning, design, and management decisions. The National Highway Runoff Water-Quality Data and Methodology Synthesis (NDAMS) is a cataloging and assessment of the documentation of information relevant to highway-runoff water quality available in published reports. The report review process is based on the NDAMS review sheet, which was designed by the USGS with input from the FHWA, State transportation agencies, and the regulatory community. The report-review process is designed to determine the technical merit of the existing literature in terms of current requirements for data documentation, data quality, quality assurance and quality control (QA/QC), and technical issues that may affect the use of historical data. To facilitate the review process, the NDAMS review sheet is divided into 12 sections: (1) administrative review information, (2) investigation and report information, (3) temporal information, (4) location information (5) water-quality-monitoring information, (6) sample-handling methods, (7) constituent information, (8) sampling focus and matrix, (9) flow monitoring methods, (10) field QA/QC, (11) laboratory, and (12) uncertainty/error analysis. This report describes the NDAMS report reviews and metadata documentation methods and provides an overview of the approach and of the quality-assurance and quality-control program used to implement the review process. Detailed information, including a glossary of relevant terms, a copy of the report-review sheets, and reportreview instructions are completely documented in a series of three appendixes included with this report. Therefore the reviews are repeatable and the methods can be used by transportation research organizations to catalog new reports as they are published.

Safety considerations of lithium-thionyl chloride cells

NASA Astrophysics Data System (ADS)

Subbarao, Surampudi; Halpert, Gerald; Stein, Irving

1986-06-01

The use of spirally wound lithium-thionyl chloride (Li-SOCl2) cells is currently limited because of their hazardous behavior. Safety hazards have ranged from mild venting of toxic materials to violent explosions and fires. These incidents may be related to both user- and manufacturer-induced causes. Many explanations have been offered to explain the unsafe behavior of the cells under operating and abuse conditions. Explanations fall into two categories: (1) thermal mechanisms, and (2) chemical mechanisms. However, it is quite difficult to separate the two. Both may be responsible for cell venting or explosion. Some safety problems encountered with these cells also may be due to design deficiencies and ineffective quality control during cell fabrication. A well-coordinated basic and applied research program is needed to develop safe Li-SOCl2 cells. Recommendations include: (1) learnig more about Li-SOL2 cell chemistry; (2) modeling cell and battery behavior; (3) optimizing cell design for safety and performance, (4) implementing quality control procedures; and (5) educating users.

Safety considerations of lithium-thionyl chloride cells

NASA Technical Reports Server (NTRS)

Subbarao, Surampudi; Halpert, Gerald; Stein, Irving

1986-01-01

The use of spirally wound lithium-thionyl chloride (Li-SOCl2) cells is currently limited because of their hazardous behavior. Safety hazards have ranged from mild venting of toxic materials to violent explosions and fires. These incidents may be related to both user- and manufacturer-induced causes. Many explanations have been offered to explain the unsafe behavior of the cells under operating and abuse conditions. Explanations fall into two categories: (1) thermal mechanisms, and (2) chemical mechanisms. However, it is quite difficult to separate the two. Both may be responsible for cell venting or explosion. Some safety problems encountered with these cells also may be due to design deficiencies and ineffective quality control during cell fabrication. A well-coordinated basic and applied research program is needed to develop safe Li-SOCl2 cells. Recommendations include: (1) learnig more about Li-SOL2 cell chemistry; (2) modeling cell and battery behavior; (3) optimizing cell design for safety and performance, (4) implementing quality control procedures; and (5) educating users.

[The Effects of Smart Program for Patients Who Underwent Percutaneous Coronary Intervention (SP-PCI) on Disease-Related Knowledge, Health Behavior, and Quality of Life: A Non-Randomized Controlled Trial].

PubMed

Lee, Jueun; Lee, Haejung

2017-12-01

To identify the effects of a smart program for the patients who underwent percutaneous coronary intervention (SP-PCI) on coronary disease-related knowledge, health behaviors, and quality of life. A nonequivalent control group with a non-synchronized design was utilized and 48 participants (experimental=22, control=26) were recruited from a university hospital in Gyeongsang area from May to December, 2016. The 12-week SP-PCI consisted of self-study of health information using smart phone applications (1/week), walking exercise (>5/week) using smart band, feedback using Kakao talk (2/week), and telephone counseling (1/week). Patients in the control group received usual care from their primary health care providers and a brief health education with basic self-management brochure after the PCI. Data were analyzed using the SPSS 21.0 program through descriptive statistics, χ² test, and t-test. After the 12-week SP-PCI, the experimental group showed higher levels of coronary disease-related knowledge (t=2.43, p=.019), heart-related health behaviors (t=5.96, p<.001), regular exercise (Z=-4.47, p<.001), and quality of life-MCS (t=3.04, p=.004) and showed lower levels of stress (Z=-3.53, p<.001) and sodium intake (t=-4.43, p<.001) than those in the control group. There were no significant group differences in medication adherence and food intake in total energy, lipids, and cholesterol. The suggested SP-PCI provided easy access and cost-effective intervention for patients after PCI and improved their knowledge of the disease, performance of health behaviors, and quality of life. Further study with a wider population is needed to evaluate the effects of SP-PCI on disease recurrence and quality of life for patients after PCI. © 2017 Korean Society of Nursing Science

A Primer on Insulin Pump Therapy for Health Care Providers.

PubMed

McCrea, Deborah L

2017-12-01

An estimated 1 million people use an insulin pump to manage their diabetes. Few medical professionals understand or feel comfortable caring for people who use an insulin pump. This article will help the medical professional understand the reasons why the insulin pump helps the user to achieve better glycemic control, have more flexibility, and enjoy a better quality of life. Additionally, this article discusses the advantages, disadvantages, candidate selection, contraindications, basic functions, and troubleshooting of the insulin pump. Copyright © 2017 Elsevier Inc. All rights reserved.

Materials and manufacturing processes for increased life/reliability. [of turbine wheels

NASA Technical Reports Server (NTRS)

Duttweiler, R. E.

1977-01-01

Improvements in both quality and durability of disk raw material for both military and commercial engines necessitated an entirely new concept in raw material process control which imposes careful selection, screening and sampling of the basic alloy ingredients, followed by careful monitoring of the melting parameters in all phases of the vacuum melting sequence. Special care is taken to preclude solidification conditions that produce adverse levels of segregation. Melt furnaces are routinely cleaned and inspected for contamination. Ingots are also cleaned and inspected before entering the final melt step.

Peer effects on self-regulation in adolescence depend on the nature and quality of the peer interaction.

PubMed

King, Kevin M; McLaughlin, Katie A; Silk, Jennifer; Monahan, Kathryn C

2017-11-21

Adolescence is a critical period for the development of self-regulation, and peer interactions are thought to strongly influence regulation ability. Simple exposure to peers has been found to alter decisions about risky behaviors and increase sensitivity to rewards. The link between peer exposure and self-regulation is likely to vary as a function of the type and quality of peer interaction (e.g., rejection or acceptance). Little is known about how the nature of interactions with peers influences different dimensions of self-regulation. We examined how randomization to acceptance or rejection by online "virtual" peers influenced multiple dimensions of self-regulation in a multisite community sample of 273 adolescents aged 16-17 years. Compared to a neutral condition, exposure to peers produced increases in cold cognitive control, but decreased hot cognitive control. Relative to peer acceptance, peer rejection reduced distress tolerance and increased sensitivity to losses. These findings suggest that different dimensions of adolescent self-regulation are influenced by the nature of the peer context: basic cognitive functions are altered by mere exposure to peers, whereas more complex decision making and emotion regulation processes are influenced primarily by the quality of that exposure.

Total Quality Management: Good Enough for Government Work

DTIC Science & Technology

1992-10-01

expectations. This monograph consists of two basic parts. The first part reviews the quality movement in the United States from the time of the industrial ... revolution up to and including strategic quality management. It will help readers understand how quality developed over the years and why particular

Design and implementation of community engagement interventions towards healthcare quality improvement in Ghana: a methodological approach.

PubMed

Alhassan, Robert Kaba; Nketiah-Amponsah, Edward; Arhinful, Daniel Kojo

2016-12-01

Nearly four decades after the Alma-Ata declaration of 1978 on the need for active client/community participation in healthcare, not much has been achieved in this regard particularly in resource constrained countries like Ghana, where over 70 % of communities in rural areas access basic healthcare from primary health facilities. Systematic Community Engagement (SCE) in healthcare quality assessment remains a grey area in many health systems in Africa, albeit the increasing importance in promoting universal access to quality basic healthcare services. Design and implement SCE interventions that involve existing community groups engaged in healthcare quality assessment in 32 intervention primary health facilities. The SCE interventions form part of a four year randomized controlled trial (RCT) in the Greater Accra and Western regions of Ghana. Community groups (n = 52) were purposively recruited and engaged to assess non-technical components of healthcare quality, recommend quality improvement plans and reward best performing facilities. The interventions comprised of five cyclical implementation steps executed for nearly a year. Wilcoxon sign rank test was used to ascertain differences in group perceptions of service quality during the first and second assessments, and ordered logistic regression analysis performed to determine factors associated with groups' perception of healthcare quality. Healthcare quality was perceived to be lowest in non-technical areas such as: information provision to clients, directional signs in clinics, drug availability, fairness in queuing, waiting times, and information provision on use of suggestion boxes and feedback on clients' complaints. Overall, services in private health facilities were perceived to be better than public facilities (p < 0.05). Community groups dominated by artisans and elderly members (60 + years) had better perspectives on healthcare quality than youthful groups (Coef. =1.78; 95 % CI = [-0.16 3.72]) and other categories of community groups (Coef. = 0.98; 95 % CI = [-0.10 2.06]). Non-technical components of healthcare quality remain critical to clients and communities served by primary healthcare providers. The SCE concept is a potential innovative and complementary quality improvement strategy that could help enhance client experiences, trust and confidence in healthcare providers. SCE interventions are more cost effective, community-focused and could easily be scaled-up and sustained by local health authorities.

How to design and write a clinical research protocol in Cosmetic Dermatology*

PubMed Central

Bagatin, Ediléia; Miot, Helio A.

2013-01-01

Cosmetic Dermatology is a growing subspecialty. High-quality basic science studies have been published; however, few double-blind, randomized controlled clinical trials, which are the major instrument for evidence-based medicine, have been conducted in this area. Clinical research is essential for the discovery of new knowledge, improvement of scientific basis, resolution of challenges, and good clinical practice. Some basic principles for a successful researcher include interest, availability, persistence, and honesty. It is essential to learn how to write a protocol research and to know the international and national regulatory rules. A complete clinical trial protocol should include question, background, objectives, methodology (design, variable description, sample size, randomization, inclusion and exclusion criteria, intervention, efficacy and safety measures, and statistical analysis), consent form, clinical research form, and references. Institutional ethical review board approval and financial support disclosure are necessary. Publication of positive or negative results should be an authors' commitment. PMID:23539006

[Standardization of cancer biobank in precision medicine era].

PubMed

Ji, Jiafu

2016-05-25

Tumor specimens have a great role in basic and clinical translational researches on cancer, especially in the era of precision medicine. Thus the standardization of cancer biobank is of high importance. The establishment and maintenance of cancer biobank require comprehensive quality management, so as to provide high quality service for basic and clinical researches. At present, sample-oriented collection and management, and clinical and pathological data annotation are the main focuses of biobank standardization in China.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bodnarczuk, M.

How does one assure that both quality and creativity are obtained in basic research environments QA theoreticians have attempted to develop workable definitions of quality, but in more reflective moments, these definitions often fail to capture the deeper essence of the idea of quality.'' This paper asserts that creativity (as a product of the human mind) is a concrete interface between perfunctory definitions of quality (conformance to specifications) and more philosophical speculations about the nature of quality- related ultimates'' like elegance or beauty. In addition, we describe the distinction between creative ideas and creative acts and highlight one of themore » major inhibitors of creativity, fear. Finally we show that highly creative people often have an irreverent attitude toward boundaries and established authority, and discuss how one can allow for this when designing a QA program in a basic research environment.« less

Quality of basic life support when using different commercially available public access defibrillators.

PubMed

Müller, Michael P; Poenicke, Cynthia; Kurth, Maxi; Richter, Torsten; Koch, Thea; Eisold, Carolin; Pfältzer, Adrian; Heller, Axel R

2015-06-21

Basic life support (BLS) guidelines focus on chest compressions with a minimal no-flow fraction (NFF), early defibrillation, and a short perishock pause. By using an automated external defibrillator (AED) lay persons are guided through the process of attaching electrodes and initiating defibrillation. It is unclear, however, to what extent the voice instructions given by the AED might influence the quality of initial resuscitation. Using a patient simulator, 8 different commercially available AEDs were evaluated within two different BLS scenarios (ventricular fibrillation vs. asystole). A BLS certified instructor acted according to the current European Resuscitation Council 2010 Guidelines and followed all of the AED voice prompts. In a second set of scenarios, the rescuer anticipated the appropriate actions and started already before the AED stopped speaking. A BLS scenario without AED served as the control. All scenarios were run three times. The time until the first chest compression was 25 ± 2 seconds without the AED and ranged from 50 ± 3 to 148 ± 13 seconds with the AED depending on the model used. The NFF was .26 ± .01 without the AED and between .37 ± .01 and .72 ± .01 when an AED was used. The perishock pause ranged from 12 ± 0 to 46 ± 0 seconds. The optimized sequence of actions reduced the NFF, which ranged now from .32 ± .01 to .41 ± .01, and the perishock pause ranging from 1 ± 1 to 19 ± 1 seconds. Voice prompts given by commercially available AED merely meet the requirements of current evidence in basic life support. Furthermore, there is a significant difference between devices with regard to time until the first chest compression, perishock pause, no-flow fraction and other objective measures of the quality of BLS. However, the BLS quality may be improved with optimized handling of the AED. Thus, rescuers should be trained on the respective AED devices, and manufacturers should expend more effort in improving user guidance to shorten the NFF and perishock pause.

Effects of perceived autonomy support and basic need satisfaction on quality of life in hemodialysis patients.

PubMed

Chen, Mei-Fang; Chang, Ray-E; Tsai, Hung-Bin; Hou, Ying-Hui

2018-03-01

Despite a growing understanding of health-related quality of life (HRQOL) and its determinants in hemodialysis (HD) patients, little is known about the effects and interrelationships concerning the perception of autonomy support and basic need satisfaction of HD patients on their HRQOL. Based on self-determination theory (SDT), this study examines whether HD patients' perceived autonomy support from health care practitioners (physicians and nurses) relates to the satisfaction of HD patients' basic needs and in turn influences their HRQOL. A questionnaire was administered to 250 Taiwanese HD patients recruited from multiclinical centers and regional hospitals in northern Taiwan. Structural equation modeling (SEM) analysis was conducted to examine the causal relationships between patient perceptions of autonomy support and HRQOL through basic need satisfaction. The empirical results of SEM indicated that the HD patients' perceived autonomy support increased the satisfaction of their basic needs (autonomy, competency, and relatedness), as expected. The higher degree of basic need satisfaction led to higher HRQOL, as measured by physical and mental component scores. Autonomy support from physicians and nurses contributes to improving HD patients' HRQOL through basic need satisfaction. This indicates that staff caring for patients with severe chronic diseases should offer considerable support for patient autonomy.

GMP in blood collection and processing.

PubMed

Wagstaff, W

1998-01-01

The principles of Good Manufacturing Practice have, in the main, been universally developed for the guidance of the pharmaceutical industry rather than for transfusion services. However, these rules and guides are increasingly being adapted for use in blood centres, in the production of labile blood components and of plasma for fractionation. The guide for pharmaceutical industries produced by the commission of the European Communities is used as a model here, the nine basic requirements being those applicable to Quality Management, personnel, premises and equipment, document, production, Quality Control, contract manufacture and analysis, complaints and product recall, and self-inspection. Though having more direct application to the production laboratory preparing blood components, the majority of these requirements and principles are also directly applicable to all of the activities involved in blood collection.

Contribution au developpement d'une methode de controle des procedes dans une usine de bouletage

NASA Astrophysics Data System (ADS)

Gosselin, Claude

This thesis, a collaborative effort between Ecole de technologie superieure and ArcelorMittal Company, presents the development of a methodology for monitoring and quality control of multivariable industrial production processes. This innovation research mandate was developed at ArcelorMittal Exploitation Miniere (AMEM) pellet plant in Port-Cartier (Quebec, Canada). With this undertaking, ArcelorMittal is striving to maintain its world class level of excellence and continues to pursue initiatives that can augment its competitive advantage worldwide. The plant's gravimetric classification process was retained as a prototype and development laboratory due to its effect on the company's competitiveness and its impact on subsequent steps leading to final production of iron oxide pellets. Concretely, the development of this expertise in process control and in situ monitoring will establish a firm basic knowledge in the fields of complex system physical modeling, data reconciliation, statistical observers, multivariate command and quality control using real-time monitoring of the desirability function. The hydraulic classifier is mathematically modeled. Using planned disturbances on the production line, an identification procedure was established to provide empirical estimations of the model's structural parameters. A new sampling campaign and a previously unpublished data collection and consolidation policy were implemented plant-wide. Access to these invaluable data sources has enabled the establishment of new thresholds that govern the production process and its control. Finally, as a substitute for the traditional quality control process, we have implemented a new strategy based on the use of the desirability function. Our innovation is not in using this Finally, as a substitute for the traditional quality control process, we have implemented a new strategy based on the use of the desirability function. Our innovation is not in using this function as an indicator of overall (economic) satisfaction in the production process, but rather in proposing it as an "observer" of the system's state. The first implementation steps have already demonstrated the method's feasibility as well as other numerous industrial impacts on production processes within the company. Namely, the emergence of the economical aspect as a strategic variable that assures better governance of production processes where quality variables present strategic issues.

Short-term effects of customized arch support insoles on symptomatic flexible flatfoot in children: A randomized controlled trial.

PubMed

Hsieh, Ru-Lan; Peng, Hui-Ling; Lee, Wen-Chung

2018-05-01

Limited evidence is available regarding the effects of insoles on pediatric flexible flatfoot because of the heterogeneity and low methodological quality of previous studies. The purpose of this prospective trial is to examine the short-term effects of customized arch support insoles on symptomatic flexible flatfoot in children by using the International Classification of Functioning, randomized controlled Disability, and Health (ICF) framework. This study was conducted in a rehabilitation outpatient clinic of a teaching hospital. Fifty-two children with symptomatic flexible flatfoot were included. The children in the treatment group wore customized arch support insoles for 12 weeks, whereas those in the control group did not wear the insoles. Both clinical and radiographic measurements, including the navicular drop, foot posture index, Beighton hypermobility score, talonavicular coverage angle, calcaneal inclination angle, and calcaneal-first metatarsal angle, were used for diagnosing flexible flatfoot. Physical activity (10-m normal and fast walking, stair ascent, stair descent, and chair rising), physical function, and psychometric properties (Pediatric Outcome Data Collection Instrument and Pediatric Quality of Life Inventory) were evaluated at the baseline and 12 weeks after the intervention. Compared with the control group, the treatment group exhibited significant improvement in pain/comfort (P = .048), physical health (P = .035), stair ascent time (P = .015), upper extremity and physical function (P = .016), and transfer and basic mobility (P = .042) during the intervention period. Children with flexible flatfoot who wore customized arch support insoles for 12 weeks exhibited significantly improved pain/comfort, physical health, stair ascent time, upper extremity and physical function, and transfer and basic mobility. These variables belong to the domains of body functions and structures and activity and participation in the ICF framework. However, because the groups were not comparable, additional studies with larger sample sizes should be conducted.

Managing recreation areas for quality user experiences: a theoretical framework

Treesearch

Thomas A. More; Gregory J. Buhyoff

1979-01-01

The production of opportunities for high-quality visitor experiences is a basic goal of recreation management. Recreation quality can be interpreted using concepts from psychological field theory to relate emotion to the strength of motivation. Applications to on-site management for recreation quality and use regulation are suggested.

25. LOOKING SOUTH AT THE MAIN CONTROL PANEL FOR BASIC ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. LOOKING SOUTH AT THE MAIN CONTROL PANEL FOR BASIC OXYGEN FURNACE No. 1 IN THE BOP SHOP'S No. 1 CONTROL ROOM ON THE OPERATING FLOOR OF THE FURNACE AISLE. - U.S. Steel Duquesne Works, Basic Oxygen Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

The Right to Basic Education for All: Addressing the Educational Needs and Barriers of Immigrant Learners in South Africa

ERIC Educational Resources Information Center

Marishane, Nylon

2013-01-01

The South African Constitution guarantees the right to basic education for all learners, including children of immigrants from across the country's borders. In view of this constitutional imperative, the Department of Basic Education is mandated to provide quality education to all learners, irrespective of their socio-economic and other…

The Global Challenge in Basic Education: Why Continued Investment in Basic Education Is Important

ERIC Educational Resources Information Center

Mertaugh, Michael T.; Jimenez, Emmanuel Y.; Patrinos, Harry A.

2009-01-01

This paper documents the importance of continued investment in basic education and argues that investments need to be carefully targeted to address the constraints that limit the coverage and quality of education if they are to provide expected benefits. Part I begins with a discussion of the returns to investment in education. Part II then…

ENHANCING SCIENTIFIC COLLABORATION THROUGH QUALITY ASSURANCE

EPA Science Inventory

The basic features of the Quality Assurance Program have been in existence since the early 1980's, but this poster will highlight some topics that have emerged more recently, in particular the Agency's laboratory competency policy, the information quality guidelines, and scientif...

An enhanced PM 2.5 air quality forecast model based on nonlinear regression and back-trajectory concentrations

NASA Astrophysics Data System (ADS)

Cobourn, W. Geoffrey

2010-08-01

An enhanced PM 2.5 air quality forecast model based on nonlinear regression (NLR) and back-trajectory concentrations has been developed for use in the Louisville, Kentucky metropolitan area. The PM 2.5 air quality forecast model is designed for use in the warm season, from May through September, when PM 2.5 air quality is more likely to be critical for human health. The enhanced PM 2.5 model consists of a basic NLR model, developed for use with an automated air quality forecast system, and an additional parameter based on upwind PM 2.5 concentration, called PM24. The PM24 parameter is designed to be determined manually, by synthesizing backward air trajectory and regional air quality information to compute 24-h back-trajectory concentrations. The PM24 parameter may be used by air quality forecasters to adjust the forecast provided by the automated forecast system. In this study of the 2007 and 2008 forecast seasons, the enhanced model performed well using forecasted meteorological data and PM24 as input. The enhanced PM 2.5 model was compared with three alternative models, including the basic NLR model, the basic NLR model with a persistence parameter added, and the NLR model with persistence and PM24. The two models that included PM24 were of comparable accuracy. The two models incorporating back-trajectory concentrations had lower mean absolute errors and higher rates of detecting unhealthy PM2.5 concentrations compared to the other models.

Improving the Quality of Basic Education, Volume 6. Country Papers: Antigua, Bermuda, India, St. Kitts, Nevis, Turks & Caicos Islands. Conference of Commonwealth Education Ministers (11th, Barbados, October 29-November 2, 1990).

ERIC Educational Resources Information Center

Commonwealth Inst., London (England).

Commonwealth Ministries of Education were asked to report on how they are undertaking the improvement of the quality of basic education in their respective countries. The papers in this volume focus on: (1) Antigua; (2) Bermuda; (3) India; (4) St. Kitts and Nevis; and (5) Turks and Caicos Islands. Charts and statistical data support each country's…

Sensor Control of Robot Arc Welding

NASA Technical Reports Server (NTRS)

Sias, F. R., Jr.

1983-01-01

The potential for using computer vision as sensory feedback for robot gas-tungsten arc welding is investigated. The basic parameters that must be controlled while directing the movement of an arc welding torch are defined. The actions of a human welder are examined to aid in determining the sensory information that would permit a robot to make reproducible high strength welds. Special constraints imposed by both robot hardware and software are considered. Several sensory modalities that would potentially improve weld quality are examined. Special emphasis is directed to the use of computer vision for controlling gas-tungsten arc welding. Vendors of available automated seam tracking arc welding systems and of computer vision systems are surveyed. An assessment is made of the state of the art and the problems that must be solved in order to apply computer vision to robot controlled arc welding on the Space Shuttle Main Engine.

Man-rated flight software for the F-8 DFBW program

NASA Technical Reports Server (NTRS)

Bairnsfather, R. R.

1975-01-01

The design, implementation, and verification of the flight control software used in the F-8 DFBW program are discussed. Since the DFBW utilizes an Apollo computer and hardware, the procedures, controls, and basic management techniques employed are based on those developed for the Apollo software system. Program Assembly Control, simulator configuration control, erasable-memory load generation, change procedures and anomaly reporting are discussed. The primary verification tools--the all-digital simulator, the hybrid simulator, and the Iron Bird simulator--are described, as well as the program test plans and their implementation on the various simulators. Failure-effects analysis and the creation of special failure-generating software for testing purposes are described. The quality of the end product is evidenced by the F-8 DFBW flight test program in which 42 flights, totaling 58 hours of flight time, were successfully made without any DFCS inflight software, or hardware, failures.

Service readiness, health facility management practices, and delivery care utilization in five states of Nigeria: a cross-sectional analysis.

PubMed

Gage, Anastasia J; Ilombu, Onyebuchi; Akinyemi, Akanni Ibukun

2016-10-06

Existing studies of delivery care in Nigeria have identified socioeconomic and cultural factors as the primary determinants of health facility delivery. However, no study has investigated the association between supply-side factors and health facility delivery. Our study analyzed the role of supply-side factors, particularly health facility readiness and management practices for provision of quality maternal health services. Using linked data from the 2005 and 2009 health facility and household surveys in the five states in which the Community Participation for Action in the Social Sector (COMPASS) project was implemented, indices of health service readiness and management were developed based on World Health Organization guidelines. Multilevel logistic regression models were run to determine the association between these indices and health facility delivery among 2710 women aged 15-49 years whose last child was born within the five years preceding the surveys and who lived in 51 COMPASS LGAs. The health facility delivery rate increased from 25.4 % in 2005 to 44.1 % in 2009. Basic amenities for antenatal care provision, readiness to deliver basic emergency obstetric and newborn care, and management practices supportive of quality maternal health services were suboptimal in health facilities surveyed and did not change significantly between 2005 and 2009. The LGA mean index of basic amenities for antenatal care provision was more positively associated with the odds of health facility delivery in 2009 than in 2005, and in rural than in urban areas. The LGA mean index of management practices was associated with significantly lower odds of health facility delivery in rural than in urban areas. The LGA mean index of facility readiness to deliver basic emergency obstetric and neonatal care declined slightly from 5.16 in 2005 to 3.98 in 2009 and was unrelated to the odds of health facility delivery. Supply-side factors appeared to play a role in health facility delivery after controlling for socio-demographic factors. Improving uptake of delivery care would require greater attention to rural-urban inequities and health facility management practices, and to increasing the number of health facilities with fundamental elements for delivery of basic emergency obstetric and neonatal care.

[Quality assurance and quality improvement in medical practice. Part 3: Clinical audit in medical practice].

PubMed

Godény, Sándor

2012-02-05

The first two articles in the series were about the definition of quality in healthcare, the quality approach, the importance of quality assurance, the advantages of quality management systems and the basic concepts and necessity of evidence based medicine. In the third article the importance and basic steps of clinical audit are summarised. Clinical audit is an integral part of quality assurance and quality improvement in healthcare, that is the responsibility of any practitioner involved in medical practice. Clinical audit principally measures the clinical practice against clinical guidelines, protocols and other professional standards, and sometimes induces changes to ensure that all patients receive care according to principles of the best practice. The clinical audit can be defined also as a quality improvement process that seeks to identify areas for service improvement, develop and carry out plans and actions to improve medical activity and then by re-audit to ensure that these changes have an effect. Therefore, its aims are both to stimulate quality improvement interventions and to assess their impact in order to develop clinical effectiveness. At the end of the article key points of quality assurance and improvement in medical practice are summarised.

Perspectives of frontline health workers on Ghana's National Health Insurance Scheme before and after community engagement interventions.

PubMed

Alhassan, Robert Kaba; Nketiah-Amponsah, Edward; Spieker, Nicole; Arhinful, Daniel Kojo; Rinke de Wit, Tobias F

2016-05-28

Barely a decade after introduction of Ghana's National Health Insurance Scheme (NHIS), significant successes have been recorded in universal access to basic healthcare services. However, sustainability of the scheme is increasingly threatened by concerns on quality of health service delivery in NHIS-accredited health facilities coupled with stakeholders' discontentment with the operational and administrative challenges confronting the NHIS. The study sought to ascertain whether or not Systematic Community Engagement (SCE) interventions have a significant effect on frontline health workers' perspectives on the NHIS and its impact on quality health service delivery. The study is a randomized cluster trial involving clinical and non-clinical frontline health workers (n = 234) interviewed at baseline and follow-up in the Greater Accra and Western regions of Ghana. Individual respondents were chosen from within each intervention and control groupings. Difference-in-difference estimations and propensity score matching were performed to determine impact of SCE on staff perceptions of the NHIS. The main outcome measure of interest was staff perception of the NHIS based on eight (8) factor-analyzed quality service parameters. Staff interviewed in intervention facilities appeared to perceive the NHIS more positively in terms of its impact on "availability and quality of drugs (p < 0.05)" and "workload on health staff/infrastructure" than those interviewed in control facilities (p < 0.1). Delayed reimbursement of service providers remained a key concern to over 70 % of respondents in control and intervention health facilities. Community engagement in quality service assessment is a potential useful strategy towards empowering communities while promoting frontline health workers' interest, goodwill and active participation in Ghana's NHIS.

Rhythm is it: effects of dynamic body feedback on affect and attitudes

PubMed Central

Koch, Sabine C.

2014-01-01

Body feedback is the proprioceptive feedback that denominates the afferent information from position and movement of the body to the central nervous system. It is crucial in experiencing emotions, in forming attitudes and in regulating emotions and behavior. This paper investigates effects of dynamic body feedback on affect and attitudes, focusing on the impact of movement rhythms with smooth vs. sharp reversals as one basic category of movement qualities. It relates those qualities to already explored effects of approach vs. avoidance motor behavior as one basic category of movement shape. Studies 1 and 2 tested the effects of one of two basic movement qualities (smooth vs. sharp rhythms) on affect and cognition. The third study tested those movement qualities in combination with movement shape (approach vs. avoidance motor behavior) and the effects of those combinations on affect and attitudes toward initially valence-free stimuli. Results suggest that movement rhythms influence affect (studies 1 and 2), and attitudes (study 3), and moderate the impact of approach and avoidance motor behavior on attitudes (study 3). Extending static body feedback research with a dynamic account, findings indicate that movement qualities – next to movement shape – play an important role, when movement of the lived body is an independent variable. PMID:24959153

Enabling nutrient security and sustainability through systems research.

PubMed

Kaput, Jim; Kussmann, Martin; Mendoza, Yery; Le Coutre, Ronit; Cooper, Karen; Roulin, Anne

2015-05-01

Human and companion animal health depends upon nutritional quality of foods. Seed varieties, seasonal and local growing conditions, transportation, food processing, and storage, and local food customs can influence the nutrient content of food. A new and intensive area of investigation is emerging that recognizes many factors in these agri-food systems that influence the maintenance of nutrient quality which is fundamental to ensure nutrient security for world populations. Modeling how these systems function requires data from different sectors including agricultural, environmental, social, and economic, but also must incorporate basic nutrition and other biomedical sciences. Improving the agri-food system through advances in pre- and post-harvest processing methods, biofortification, or fortifying processed foods will aid in targeting nutrition for populations and individuals. The challenge to maintain and improve nutrient quality is magnified by the need to produce food locally and globally in a sustainable and consumer-acceptable manner for current and future populations. An unmet requirement for assessing how to improve nutrient quality, however, is the basic knowledge of how to define health. That is, health cannot be maintained or improved by altering nutrient quality without an adequate definition of what health means for individuals and populations. Defining and measuring health therefore becomes a critical objective for basic nutritional and other biomedical sciences.

The Prevalence and Determinants of Controlled Substance Discrepancies in a Level I Trauma Hospital

PubMed Central

Anyanwu, Chukwuma; Egwim, Oliver

2016-01-01

Background Healthcare institutions are often faced with challenges and accreditation requirements for improving treatment quality, reducing waste, and avoiding diversion of drugs, particularly controlled substances. Many automated systems have replaced manual systems but may be fraught with challenges, especially when multiple users are involved. Objective To describe the characteristics of controlled substance discrepancies observed in a Level I trauma hospital for Medicare. Methods Discrepancy data were captured for each user involved in a transaction for a controlled substance at the Level I trauma hospital (in Ben Taub Hospital, Houston, TX), and the information was stored in a computerized database repository. Data for the 1-year study period (from January 1 through December 31, 2013) were collected for Medicare beneficiaries, using an Excel 2013 spreadsheet, and were analyzed according to basic discrepancy characteristics and descriptive statistics. Results During the 12-month study period, 114,000 controlled substance discrepancies were found for 100,000 Medicare patients at this Level I trauma hospital. Vending activities accounted for the majority (52.6%) of these discrepancies. Discrepancies were most likely to occur on Wednesdays, and the medications involved most frequently were combination drugs of hydrocodone and acetaminophen. Conclusion Approximately 1 (1.14) discrepancy involving a controlled substance occurred for each Medicare patient treated at the study facility. Healthcare institutions need to improve their efforts to ensure high-quality care and prevent diversion of drugs. PMID:27606038

An investigation of perceptions of programme quality support of adult basic education programmes.

PubMed

Udouj, Gary; Grover, Kenda; Belcher, Greg; Kacirek, Kit

2017-04-01

This study was designed to identify the degree to which the directors of adult basic education programs perceive they have program quality support, as evidenced by a well-defined mission and role in the community, a management system, human resources management, and a suitable learning environment. NSCALL's Evidence-based program self-assessment (2006) was modified and administered electronically to administrators of adult education programs in a mid-southern state. Findings indicated that most directors perceive they are implementing the indicators of program quality support in all of the areas surveyed. A research-based annual self-study that considers the quality indicators is recommended, leaving a need for an update to the NCSALL assessment for use as a program assessment instrument. Copyright © 2016 Elsevier Ltd. All rights reserved.

Three-dimensional porous poly-DL-lactide/basic fibroblast growth factor composites for bone defect repair: an experimental study.

PubMed

Min, Shao-xiong; Jin, An-min; Tong, Bin-hui; Zhu, Li-xin; Tian, Jing

2003-04-01

To investigate the osteoinductive ability of the composites consisting of basic fibroblast growth factor (bFGF) and porous poly-DL-lactide (PDLLA) for the development of a new absorbable osteosynthesis material. Highly porous foams of PDLLA with the pore size ranging from 150 to 300 microm were prepared by a solvent-casting, particulate-leaching technique with NaCl as the leachable component. Animal models of radial diaphyseal defects of 1.0 cm with complete removal of the periosteum were induced in 45 rabbits, which were randomly divided into 3 groups to receive the defect repair with PDLLA and PDLLA/bFGF respectively, leaving one group untreated to serve as the control group. The implant specimens were harvested at 2, 4, 8, and 12 weeks respectively after the surgery and X-ray, histological and scanning electron microscopic (SEM) examinations were performed to evaluate the effectiveness of defect repair. At 8 and 12 weeks after implantation, biomechanical test (for three-point bending strength) was employed to study the quality of bone formation. PDLLA/bFGF composite stimulated more bone formation and had higher bending strength than PDLLA (P<0.05), and the bone formation induced by both materials was significantly more than that observed in the control group in every postoperative stage (P<0.05). PDLLA possesses good biocompatibility and absorbability, and when prepared into a porous material, it exhibits good osteoconductibility. As a good bFGF carrier, the foam of PDLLA with three- dimensional structure shows good osteoinductive ability with regard to the rapidity, quantity and quality of the bone formation.

The role of quality assurance in future midwifery practice.

PubMed

Dawson, J

1993-08-01

Recent recommendations have been made which would give midwives a more central role in maternity care and a greater degree of independence than they currently enjoy. This paper argues that midwives' current attitudes to quality assurance are incompatible with this enhanced role. Research conducted in three health districts is described, which explored the perceptions of nurses, midwives and managers towards quality assurance. The findings indicate that quality assurance (in whatever form that concept is operationalized) is a demonstration of accountability. For managers this accountability is primarily for the service as a whole, whilst nurses and midwives view their accountability as being owed to patients/clients. The main methodology which the study identified as being used for monitoring nursing care was the development and auditing of explicit standards. This approach has been actively promoted by the Royal College of Nursing, enabling nurses to regain control of the purely professional aspects of the nursing profession. Midwives in the study districts showed a marked reluctance to adopt such a strategy, taking the view that as independent practitioners consensus standards would be unacceptable. It is argued that this attitude is inconsistent with the basic principle that professionals are accountable for both demonstrating and developing the quality of professional practice. It is further suggested that midwives currently have an opportunity to regain professional control of midwifery practice, which will be lost unless they are prepared to take responsibility for evaluating the standards for which they are accountable.

41 CFR 102-76.10 - What basic design and construction policy governs Federal agencies?

Code of Federal Regulations, 2012 CFR

2012-01-01

... basic design and construction policies: (a) Provide the highest quality services for designing and... requirements. (See 40 U.S.C. 3310 and 3312.) (d) Design Federal buildings to have a long life expectancy and...

41 CFR 102-76.10 - What basic design and construction policy governs Federal agencies?

Code of Federal Regulations, 2013 CFR

2013-07-01

... basic design and construction policies: (a) Provide the highest quality services for designing and... requirements. (See 40 U.S.C. 3310 and 3312.) (d) Design Federal buildings to have a long life expectancy and...

Questions and Issues in Basic Writing and Computing (Computers and Controversy).

ERIC Educational Resources Information Center

Gay, Pamela

1991-01-01

Presents findings from 18 reviewed studies with regard to attitude and the quality of writing performance. Discusses pedagogy and the problem of defining basic writers. Suggests research directions that can help move educators toward a new pedagogy. (MG)

The Emergence of Quality Assessment in Brazilian Basic Education

ERIC Educational Resources Information Center

Kauko, Jaakko; Centeno, Vera Gorodski; Candido, Helena; Shiroma, Eneida; Klutas, Anni

2016-01-01

The focus in this article is on Brazilian education policy, specifically quality assurance and evaluation. The starting point is that quality, measured by means of large-scale assessments, is one of the key discursive justifications for educational change. The article addresses the questions of how quality evaluation became a significant feature…

Educational Quality in Music Teacher Education: Components of a Foundation for Research

ERIC Educational Resources Information Center

Johansen, Geir

2007-01-01

Increasing demands for educational quality in higher education affect both higher music education and music teacher education. A theoretical framework is needed if we are to question what is meant by "educational quality" in the latter. To establish programs for quality development and assessment requires basic subject-specific research on the…

Exploratory piloted simulator study of the effects of winglets on handling qualities of a representative agricultural airplane

NASA Technical Reports Server (NTRS)

Ogburn, M. E.; Brown, P. W.

1980-01-01

The effects on handling qualities of adding winglets to a representative agricultural aircraft configuration during swath-run maneuvering were evaluated. Aerodynamic data used in the simulation were based on low-speed wind tunnel tests of a full scale airplane and a subscale model. The Cooper-Harper handling qualities rating scale, supplementary pilot comments, and pilot vehicle performance data were used to describe the handling qualities of the airplane with the different wing-tip configurations. Results showed that the lateral-directional handling qualities of the airplane were greatly affected by the application of winglets and winglet cant angle. The airplane with winglets canted out 20 deg exhibited severely degraded lateral directional handling qualities in comparison to the basic airplane. When the winglets were canted inward 10 deg, the flying qualities of the configuration were markedly improved over those of the winglet-canted-out configuration or the basic configuration without winglets, indicating that proper tailoring of the winglet design may afford a potential benefit in the area of handling qualities.

Novel low-cost vision-sensing technology with controllable of exposal time for welding

NASA Astrophysics Data System (ADS)

Zhang, Wenzeng; Wang, Bin; Chen, Nian; Cao, Yipeng

2005-02-01

In the process of robot Welding, position of welding seam and welding pool shape is detected by CCD camera for quality control and seam tracking in real-time. It is difficult to always get a clear welding image in some welding methods, such as TIG welding. A novel idea that the exposal time of CCD camera is automatically controlled by arc voltage or arc luminance is proposed to get clear welding image. A set of special device and circuits are added to a common industrial CCD camera in order to flexibly control the CCD to start or close exposal by control of the internal clearing signal of the accumulated charge. Two special vision sensors according to the idea are developed. Their exposal grabbing can be triggered respectively by the arc voltage and the variety of the arc luminance. Two prototypes have been designed and manufactured. Experiments show that they can stably grab clear welding images at appointed moment, which is a basic for the feedback control of automatic welding.

Sleep quality and its relationship with quality of life among high-risk pregnant women (gestational diabetes and hypertension).

PubMed

Saadati, Fatemeh; Sehhatiei Shafaei, Fahimeh; Mirghafourvand, Mozhgan

2018-01-01

Sleep is one of the most basic human requirements. This research aims at determining the status of sleep quality and its relationship with quality of life among high-risk pregnant women in Tabriz, Iran, in 2015. This research was a sectional study done on 364 qualified women in 28-36 weeks of pregnancy suffering from mild preeclampsia and gestational diabetes. The sampling was done as convenience. Personal-social-midwifery questionnaire, Pittsburg sleep quality, and quality of life in pregnancy (QOL-ORAV) were used for gathering data. Multivariate linear regression model was used for determining the relationship between sleep quality and its subsets with quality of life and controlling confounders. In the current study, the prevalence of sleep disturbance was 96.4%. Mean (SD) of the total score of sleep quality was 10.1 (4.1) and the total score of quality of life was 61.7 (17.3). According to Pearson's correlation test, there was statistically significant relationship between quality of life and sleep quality and all its subsets except sleep duration and use of sleep medication (p < 0.001). Meanwhile, according to the multivariate linear regression model, sleep latency, day time dysfunction, health status, and home air-conditioning were related with quality of life. The findings of current research show that sleep quality is low among high-risk pregnant women and quality of life is medium. So, it is necessary that required training is given by health cares for improving sleep quality and quality of life to mothers.

[Milk and food security].

PubMed

Díaz Yubero, Miguel Ángel

2015-04-07

In the history of food security in the EU there is a before and after the White Paper published in January 2000; since then we are witnessing radical new approaches in the Commission strategy to ensure the highest standards of food safety for EU citizens, based on a more coordinated and integrated organization. The basic principle was to extend the application of control measures at all stages of the production chain, which was summarized in the slogan which has since been repeated regularly: 'From Farm to Consumer'. The new guidelines for action were the answer to a series of food crises (dioxin, hormones, BSE...) that called into question the European agri-food system and, what was even more severe, produced a deep distrust of consumers by health risks attached to feeding. Beef and cow's milk, two basic components of the European diet, were the products most affected by the aforementioned crisis, which showed that in those years very few companies paid attention to the quality from the source. In this paper a review of the issues presented at the time, the measures implemented by the White Paper and the path travelled is done, while it raised the need to use safe and quality raw materials, so that consumers have absolute confidence in their food. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Modeling and Simulation for an 8 kW Three-Phase Grid-Connected Photo-Voltaic Power System

NASA Astrophysics Data System (ADS)

Cen, Zhaohui

2017-09-01

Gird-connected Photo-Voltaic (PV) systems rated as 5-10 kW level have advantages of scalability and energy-saving, so they are very typical for small-scale household solar applications. In this paper, an 8 kW three-phase grid-connected PV system model is proposed and studied. In this high-fidelity model, some basic PV system components such as solar panels, DC-DC converters, DC-AC inverters and three-phase utility grids are mathematically modelled and organized as a complete simulation model. Also, an overall power controller with Maximum Power Point Control (MPPT) is proposed to achieve both high-efficiency for solar energy harvesting and grid-connection stability. Finally, simulation results demonstrate the effectiveness of the PV system model and the proposed controller, and power quality issues are discussed.

Dynamics, stability, and control of maglev systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Y.; Chen, S.S.; Rote, D.M.

1993-06-01

The dynamic response of maglev systems is important in several respects: Safety and ride quality, guideway design, and system costs. The dynamic response of vehicles is the key element in the determination of ride quality, and vehicle stability is one of the important elements relative to safety. To design a proper guideway that provides acceptable ride quality in the stable region, the vehicle dynamics must be understood. The trade-off between guideway smoothness and the levitation and control systems must be considered if maglev systems are to be economically feasible. This paper is a summary of our previous work on dynamics,more » stability and control of maglev systems. First of all, the importance of dynamics of vehicle/guideway of maglev systems is discussed. Emphasis is placed on the modeling vehicle/guideway interactions of maglev systems with a multicar, or multiload vehicle traversing on a single or double-span flexible guideway. Coupled effects of vehicle/guideway interactions in wide range of vehicle speeds with various vehicle and guideway parameters for maglev systems are investigated. Secondly, the alternative control designs of maglev vehicle suspension systems are investigated in this study to achieve safe, stable operation and acceptable ride comfort requires some form of vehicle motion control. Active and semi-active control law designs are introduced into primary and secondary suspensions of maglev vehicles. Finally, this paper discusses the stability of maglev systems based on experimental data, scoping calculations, and simple mathematical models. Divergence and flutter are obtained for coupled vibration of a three-degree-of-freedom maglev vehicle on a guideway consisting of double L-shaped aluminum segments. The theory and analysis developed in this study provides basic stability characteristics and identifies future research needs for maglev systems.« less

Dynamics, stability, and control of maglev systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Y.; Chen, S.S.; Rote, D.M.

1993-01-01

The dynamic response of maglev systems is important in several respects: Safety and ride quality, guideway design, and system costs. The dynamic response of vehicles is the key element in the determination of ride quality, and vehicle stability is one of the important elements relative to safety. To design a proper guideway that provides acceptable ride quality in the stable region, the vehicle dynamics must be understood. The trade-off between guideway smoothness and the levitation and control systems must be considered if maglev systems are to be economically feasible. This paper is a summary of our previous work on dynamics,more » stability and control of maglev systems. First of all, the importance of dynamics of vehicle/guideway of maglev systems is discussed. Emphasis is placed on the modeling vehicle/guideway interactions of maglev systems with a multicar, or multiload vehicle traversing on a single or double-span flexible guideway. Coupled effects of vehicle/guideway interactions in wide range of vehicle speeds with various vehicle and guideway parameters for maglev systems are investigated. Secondly, the alternative control designs of maglev vehicle suspension systems are investigated in this study to achieve safe, stable operation and acceptable ride comfort requires some form of vehicle motion control. Active and semi-active control law designs are introduced into primary and secondary suspensions of maglev vehicles. Finally, this paper discusses the stability of maglev systems based on experimental data, scoping calculations, and simple mathematical models. Divergence and flutter are obtained for coupled vibration of a three-degree-of-freedom maglev vehicle on a guideway consisting of double L-shaped aluminum segments. The theory and analysis developed in this study provides basic stability characteristics and identifies future research needs for maglev systems.« less

Prediction of the Vickers Microhardness and Ultimate Tensile Strength of AA5754 H111 Friction Stir Welding Butt Joints Using Artificial Neural Network.

PubMed

De Filippis, Luigi Alberto Ciro; Serio, Livia Maria; Facchini, Francesco; Mummolo, Giovanni; Ludovico, Antonio Domenico

2016-11-10

A simulation model was developed for the monitoring, controlling and optimization of the Friction Stir Welding (FSW) process. This approach, using the FSW technique, allows identifying the correlation between the process parameters (input variable) and the mechanical properties (output responses) of the welded AA5754 H111 aluminum plates. The optimization of technological parameters is a basic requirement for increasing the seam quality, since it promotes a stable and defect-free process. Both the tool rotation and the travel speed, the position of the samples extracted from the weld bead and the thermal data, detected with thermographic techniques for on-line control of the joints, were varied to build the experimental plans. The quality of joints was evaluated through destructive and non-destructive tests (visual tests, macro graphic analysis, tensile tests, indentation Vickers hardness tests and t thermographic controls). The simulation model was based on the adoption of the Artificial Neural Networks (ANNs) characterized by back-propagation learning algorithm with different types of architecture, which were able to predict with good reliability the FSW process parameters for the welding of the AA5754 H111 aluminum plates in Butt-Joint configuration.

Monitoring industrial wastewater by online GC-MS with direct aqueous injection.

PubMed

Wortberg, M; Ziemer, W; Kugel, M; Müller, H; Neu, H-J

2006-03-01

An online GC-MS-system for automated monitoring of crude wastewater at a complex chemical production site is presented. The modular system is, in principal, based on commercial equipment, but utilizes a special, two-stage injector, which consists of a splitless vaporization chamber on top of a PTV injector filled with Tenax. This set-up enables direct injection of wastewater. Almost 140 volatile and semi-volatile compounds are calibrated down to 1 mg L(-1), which is sufficient for analysis of the influent of the wastewater-treatment plant. Two instruments analyze alternately, every 20 min, and the instrument cycle time is 40 min. The quantitative results are transferred to a database which is connected to a process-control system. Depending on the nature and concentration of a compound, an alarm can be generated and the wastewater stream can be diverted into an "off spec tank" if necessary. The GC-MS-system operates quasi-continuously with a system availability >98%. Data quality is automatically controlled in each run and by daily analysis of a quality-control sample. The development of a novel stacked PTV-PTV injector design to expand the range of analytes to selected basic compounds is described.

Back to basics: hand hygiene and isolation

PubMed Central

Lin Huang, G. Khai; Stewardson, Andrew J.; Lindsay Grayson, M.

2014-01-01

Purpose of review Hand hygiene and isolation are basic, but very effective, means of preventing the spread of pathogens in healthcare. Although the principle may be straightforward, this review highlights some of the controversies regarding the implementation and efficacy of these interventions. Recent findings Hand hygiene compliance is an accepted measure of quality and safety in many countries. The evidence for the efficacy of hand hygiene in directly reducing rates of hospital-acquired infections has strengthened in recent years, particularly in terms of reduced rates of staphylococcal sepsis. Defining the key components of effective implementation strategies and the ideal method(s) of assessing hand hygiene compliance are dependent on a range of factors associated with the healthcare system. Although patient isolation continues to be an important strategy, particularly in outbreaks, it also has some limitations and can be associated with negative effects. Recent detailed molecular epidemiology studies of key healthcare-acquired pathogens have questioned the true efficacy of isolation, alone as an effective method for the routine prevention of disease transmission. Summary Hand hygiene and isolation are key components of basic infection control. Recent insights into the benefits, limitations and even adverse effects of these interventions are important for their optimal implementation. PMID:24945613

Air Pollution Monitoring | Air Quality Planning & Standards ...

EPA Pesticide Factsheets

2016-06-08

The basic mission of the Office of Air Quality Planning and Standards is to preserve and improve the quality of our nation's air. To accomplish this, OAQPS must be able to evaluate the status of the atmosphere as compared to clean air standards and historical information.

Freshwater Ecosystem Research in Water Quality Management

ERIC Educational Resources Information Center

Ferris, James J.; And Others

1974-01-01

Describes the use of modeling techniques to contribute to the basic knowledge of ecologic science, and in solving problems of biological production, resource-use planning and management, and environmental quality. (JR)

The automated system for technological process of spacecraft's waveguide paths soldering

NASA Astrophysics Data System (ADS)

Tynchenko, V. S.; Murygin, A. V.; Emilova, O. A.; Bocharov, A. N.; Laptenok, V. D.

2016-11-01

The paper solves the problem of automated process control of space vehicles waveguide paths soldering by means of induction heating. The peculiarities of the induction soldering process are analyzed and necessity of information-control system automation is identified. The developed automated system makes the control of the product heating process, by varying the power supplied to the inductor, on the basis of information about the soldering zone temperature, and stabilizing the temperature in a narrow range above the melting point of the solder but below the melting point of the waveguide. This allows the soldering process automating to improve the quality of the waveguides and eliminate burn-troughs. The article shows a block diagram of a software system consisting of five modules, and describes the main algorithm of its work. Also there is a description of the waveguide paths automated soldering system operation, for explaining the basic functions and limitations of the system. The developed software allows setting of the measurement equipment, setting and changing parameters of the soldering process, as well as view graphs of temperatures recorded by the system. There is shown the results of experimental studies that prove high quality of soldering process control and the system applicability to the tasks of automation.

The coverage and frequency of mass drug administration required to eliminate persistent transmission of soil-transmitted helminths

PubMed Central

Anderson, Roy; Truscott, James; Hollingsworth, T. Deirdre

2014-01-01

A combination of methods, including mathematical model construction, demographic plus epidemiological data analysis and parameter estimation, are used to examine whether mass drug administration (MDA) alone can eliminate the transmission of soil-transmitted helminths (STHs). Numerical analyses suggest that in all but low transmission settings (as defined by the magnitude of the basic reproductive number, R0), the treatment of pre-school-aged children (pre-SAC) and school-aged children (SAC) is unlikely to drive transmission to a level where the parasites cannot persist. High levels of coverage (defined as the fraction of an age group effectively treated) are required in pre-SAC, SAC and adults, if MDA is to drive the parasite below the breakpoint under which transmission is eliminated. Long-term solutions to controlling helminth infections lie in concomitantly improving the quality of the water supply, sanitation and hygiene (WASH). MDA, however, is a very cost-effective tool in long-term control given that most drugs are donated free by the pharmaceutical industry for poor regions of the world. WASH interventions, by lowering the basic reproductive number, can facilitate the ability of MDA to interrupt transmission. PMID:24821921

The coverage and frequency of mass drug administration required to eliminate persistent transmission of soil-transmitted helminths.

PubMed

Anderson, Roy; Truscott, James; Hollingsworth, T Deirdre

2014-01-01

A combination of methods, including mathematical model construction, demographic plus epidemiological data analysis and parameter estimation, are used to examine whether mass drug administration (MDA) alone can eliminate the transmission of soil-transmitted helminths (STHs). Numerical analyses suggest that in all but low transmission settings (as defined by the magnitude of the basic reproductive number, R0), the treatment of pre-school-aged children (pre-SAC) and school-aged children (SAC) is unlikely to drive transmission to a level where the parasites cannot persist. High levels of coverage (defined as the fraction of an age group effectively treated) are required in pre-SAC, SAC and adults, if MDA is to drive the parasite below the breakpoint under which transmission is eliminated. Long-term solutions to controlling helminth infections lie in concomitantly improving the quality of the water supply, sanitation and hygiene (WASH). MDA, however, is a very cost-effective tool in long-term control given that most drugs are donated free by the pharmaceutical industry for poor regions of the world. WASH interventions, by lowering the basic reproductive number, can facilitate the ability of MDA to interrupt transmission.

CASA-Mot in mammals: an update.

PubMed

Yániz, J L; Silvestre, M A; Santolaria, P; Soler, C

2018-03-08

Sperm motility is one of the most widely used parameters of sperm quality. Computer-aided sperm motility analysis (CASA-Mot) systems were developed to reduce the subjectivity of sperm motility assessment, and have had broad scientific and practical acceptance. In this review, the sources of variation and current applications of this technology and its relationships with other sperm quality tests are described in detail. Despite remarkable advances in the technique, there is still great need for standardisation in many species, and the numerous factors that affect the results make it difficult to provide universally accepted criteria for classifying semen samples based on sperm motility characteristics. The main fields for CASA-Mot include the study of male fertility and pathologies, evaluation of the effects of physical and chemical agents, improvement of epidemiological survey studies, more precise calculation of seminal doses for farm animals, realisation of basic studies about sperm function, improvement of sperm technologies such as cryopreservation and quality control analysis. Numerous relationships have been established between CASA-Mot and other sperm quality tests, although most of these parameters are complementary. Future CASA-Mot systems will probably be able to integrate several sperm quality parameters with motility.

Male dance moves that catch a woman's eye

PubMed Central

Neave, Nick; McCarty, Kristofor; Freynik, Jeanette; Caplan, Nicholas; Hönekopp, Johannes; Fink, Bernhard

2011-01-01

Male movements serve as courtship signals in many animal species, and may honestly reflect the genotypic and/or phenotypic quality of the individual. Attractive human dance moves, particularly those of males, have been reported to show associations with measures of physical strength, prenatal androgenization and symmetry. Here we use advanced three-dimensional motion-capture technology to identify possible biomechanical differences between women's perceptions of ‘good’ and ‘bad’ male dancers. Nineteen males were recorded using the ‘Vicon’ motion-capture system while dancing to a basic rhythm; controlled stimuli in the form of avatars were then created in the form of 15 s video clips, and rated by 39 females for dance quality. Initial analyses showed that 11 movement variables were significantly positively correlated with perceived dance quality. Linear regression subsequently revealed that three movement measures were key predictors of dance quality; these were variability and amplitude of movements of the neck and trunk, and speed of movements of the right knee. In summary, we have identified specific movements within men's dance that influence women's perceptions of dancing ability. We suggest that such movements may form honest signals of male quality in terms of health, vigour or strength, though this remains to be confirmed. PMID:20826469

Quality of Basic Life Support - A Comparison between Medical Students and Paramedics.

PubMed

Körber, Maria Isabel; Köhler, Thomas; Weiss, Verena; Pfister, Roman; Michels, Guido

2016-07-01

Poor survival rates after cardiac arrest can partly be explained by poor basic life support skills in medical professionals. This study aimed to assess quality of basic life support in medical students and paramedics. We conducted a prospective observational study with 100 early medical students (group A), 100 late medical students (group B) and 100 paramedics (group C), performing a 20-minute basic life support simulation in teams of two. Average frequency and absolute number of chest compressions per minute (mean (±SD)), chest decompression (millimetres of compression remaining, mean (±SD)), hands-off-time (seconds/minute, mean (±SD)), frequency of switching positions between ventilation and chest compression (per 20 minutes) and rate of sufficient compressions (depth ≥50mm) were assessed as quality parameters of CPR. In groups A, B and C the rates of sufficiently deep chest compressions were 56%, 42% and 52%, respectively, without significant differences. Male gender and real-life CPR experience were significantly associated with deeper chest compression. Frequency and number of chest compressions were within recommended goals in at least 96% of all groups. Remaining chest compressions were 6 mm (±2), 6 mm (±2) and 5 mm (±2) with a significant difference between group A and C (p=0.017). Hands-off times were 6s/min (±1), 5s/min (±1) and 4s/min (±1), which was significantly different across all three groups. Overall, paramedics tended to show better quality of CPR compared to medical students. Though, chest compression depth as an important quality characteristic of CPR was insufficient in almost 50% of participants, even in well trained paramedics. Therefore, we suggest that an effort should be made to find better ways to educate health care professionals in BLS.

Alternatives to animal experimentation in basic research.

PubMed

Gruber, Franz P; Hartung, Thomas

2004-01-01

In contrast to animal testing required by law to guarantee minimum safety standards for the licensing of drugs and chemicals, there are no regulations in basic research forcing scientists to perform animal tests. By (usually) free choice, questions are posed and hypotheses are examined which, in many cases, can only be answered by means of animal tests. Just as easily, different questions could be asked or different hypotheses could be examined which do not require animal tests. The only criterion for the choice of a topic is its relevance which cannot necessarily be judged in the short-term. Thus, it is up to the individual scientist to judge what is worth studying and therefore worth animal consumption. The educated mind will consider ethical aspects of this choice. However, on the other hand, this decision is largely influenced by questions of efficacy or (in a negative sense) by the obstacles posed to an animal consuming approach. Here, peer review and general attitude will strongly influence the methodology chosen. Availability and awareness of adequate in vitro techniques represent the prerequisites for the use of alternative methods. The least one can do in basic research is to avoid tests which cause severe suffering to animals, as is required in Switzerland and other European countries by binding ethical principles and guidelines. The increasing standard of approval and control procedures has improved the situation over the years. There are many examples of successful alternative methods in basic research. But, the application of such methods is in most cases limited to the laboratories in which they were developed, calling for technology transfer. Exceptions are procedures that are used worldwide, like the production of monoclonal antibodies, which instead of using the ascites mouse can also be performed in vitro with some good will. In these cases, commercialisation of the techniques has aided their spread within the scientific community. Sadly, many methods, even if published in the scientific literature, are little standardised and reproducible. The suggestion is put forward that publicly accessible databases should make available more detailed descriptions of methodologies. Due to limitations in space, many scientific journals cannot publish detailed methodological descriptions. However, nowadays a supplementary central deposit of methods could easily be linked to the respective article. In numerous cases though, there is simply a lack of will to change procedures to methods without animal tests or to pose questions differently in order to avoid the use of animals or to reduce their number or, at least, to reduce stress. In other cases, researchers are simply not aware of the limitations of the animal experiment as such. A thorough review of the validity of critical animal experiments should be carried out and made available publicly. For example, many animal experiments are dramatically "under-powered", i.e. carried out with groups that are too small to allow conclusions to be drawn from the outcome. This stands in marked contrast to in vitro experiments where replicate experiments usually represent no major problem. Since in vitro models are generally more prone to artefacts due to the numerous variables, e.g. of cell culture, the key requirement for their application is their validation and quality control. Guided by the experience from validation studies for alternative methods in toxicology, concepts of a Good Cell Culture Practice (GCCP) are currently being developed which aim to define minimum quality standards for in vitro techniques. This initiative aiming to increase quality must be complemented by a concept to systematically assess the relevance of the tests in order to finally achieve an evidence-based biomedical research. A change in this direction is only possible if those public funds, which were previously assigned predominantly to alternatives to the animal tests required by law, are now channelled increasingly into developing those for basic research. A financial incentive is necessary to change procedures in basic research to animal free procedures. Ethical considerations alone will bring little movement or change. It is unacceptable that, while numbers of animal tests decrease in development and notification of drugs and chemicals, they are increasing in basic research. Due to the central role of publishing scientific results, the key options for control are the respective rules of journals for the acceptance of articles. By demanding certain standards in the instructions for authors, e.g. of quality (GCCP), relevance and in case of animal experiments proof that no alternative is available, pressure could be dramatically increased. It is suggested to hold a consensus conference of journals in the life sciences on this topic.

fMRI-Compatible Electromagnetic Haptic Interface.

PubMed

Riener, R; Villgrattner, T; Kleiser, R; Nef, T; Kollias, S

2005-01-01

A new haptic interface device is suggested, which can be used for functional magnetic resonance imaging (fMRI) studies. The basic component of this 1 DOF haptic device are two coils that produce a Lorentz force induced by the large static magnetic field of the MR scanner. A MR-compatible optical angular encoder and a optical force sensor enable the implementation of different control architectures for haptic interactions. The challenge was to provide a large torque, and not to affect image quality by the currents applied in the device. The haptic device was tested in a 3T MR scanner. With a current of up to 1A and a distance of 1m to the focal point of the MR-scanner it was possible to generate torques of up to 4 Nm. Within these boundaries image quality was not affected.

International recognition of basic medical education programmes.

PubMed

Karle, Hans

2008-01-01

This document aims to formulate a World Federation for Medical Education (WFME) policy and to open debate on the subject on international recognition of basic medical education institutions and programmes. We carried out a systematic review of international quality assurance of medical education and recognition methodology, including accreditation procedures and alternative quality assurance methods, with a focus on the role of the WFME in international recognition of basic medical education programmes. In order to further the intentions of the WFME, the Federation will: continue its activity to establish new Global Directories of Health Professions Education Institutions (GDHPEI); set up a planning working group to prepare the work of the international advisory committee for GDHPEI; develop a database of relevant accrediting and recognising agencies; continue its project on the promotion of proper national accreditation; establish a working group to develop principles to be used in the evaluation of medical schools and other health professions education institutions and their programmes for the purpose of international recognition, especially when proper accreditation is not feasible, and work with partners on training programmes for advisors and assessors. The new directory for medical schools, which will include qualitative information about basic medical education programmes, will provide a basis for the meta-recognition of medical schools' programmes by stimulating the establishment of national accreditation systems and other quality assurance instruments.

Quality Indicators for Single-Case Research on Social Skill Interventions for Children with Autistic Spectrum Disorder

ERIC Educational Resources Information Center

Wang, Shin-Yi; Parrila, Rauno

2008-01-01

In this paper, we describe a quality checklist that parents, teachers, clinicians, and policy-makers with basic research skills can use to systematically evaluate the methodological quality of single-case studies on social skill training of children with autistic spectrum disorder (ASD). We provide a rationale for included quality indicators, and…

Dilemma of Access and Provision of Quality Basic Education in Central Region, Ghana

ERIC Educational Resources Information Center

Amakyi, Michael; Ampah-Mensah, Alfred

2016-01-01

A survey research was conducted to find out if reported improvements in access to education in Ghana are reflected in comparable improvements in delivery of quality education. The study examined theoretical constructs on adequacy and quality assurance in education to ascertain the state of quality provision in education, and whether there is a…

Experience gained from the application of basic quality assurance procedures in a Greek university engineering department

NASA Astrophysics Data System (ADS)

Stamatelos, A. M.

2010-06-01

During the last decade, significant funding has become available to Greek public universities to support the convergence to the common European space of higher education. In a number of departments, this funding was wisely invested in the development of a quality culture, covering not only the educational process, but also the services offered by the department's administration and technical support staff. This paper presents the design and implementation of a quality-oriented studies' reform plan in the Mechanical Engineering Department, University of Thessaly in the period 2002-2008. Based on the successful experience from its application, a significant part of the personnel and students have become acquainted with basic quality assurance procedures and performance evaluation. Experience and lessons learnt from this effort are reported and discussed in this paper.

Machine tools and fixtures: A compilation

NASA Technical Reports Server (NTRS)

1971-01-01

As part of NASA's Technology Utilizations Program, a compilation was made of technological developments regarding machine tools, jigs, and fixtures that have been produced, modified, or adapted to meet requirements of the aerospace program. The compilation is divided into three sections that include: (1) a variety of machine tool applications that offer easier and more efficient production techniques; (2) methods, techniques, and hardware that aid in the setup, alignment, and control of machines and machine tools to further quality assurance in finished products: and (3) jigs, fixtures, and adapters that are ancillary to basic machine tools and aid in realizing their greatest potential.

Basic research needs and opportunities on interfaces in solar materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Czanderna, A. W.; Gottschall, R. J.

1981-04-01

The workshop on research needs and recommended research programs on interfaces in solar energy conversion devices was held June 30-July 3, 1980. The papers deal mainly with solid-solid, solid-liquid, and solid-gas interfaces, sometimes involving multilayer solid-solid interfaces. They deal mainly with instrumental techniques of studying these interfaces so they can be optimized, so they can be fabricated with quality control and so changes with time can be forecast. The latter is required because a long lifetime (20 yrs is suggested) is necessary for economic reasons. Fifteen papers have been entered individually into EDB and ERA. (LTN)

The influence of utility-interactive PV system characteristics to ac power networks

NASA Astrophysics Data System (ADS)

Takeda, Y.; Takigawa, K.; Kaminosono, H.

Two basic experimental photovoltaic (PV) systems have been built for the study of variation of power quality, aspects of safety, and technical problems. One system uses a line-commutated inverter, while the other system uses a self-commutated inverter. A description is presented of the operating and generating characteristics of the two systems. The systems were connected to an ac simulated network which simulates an actual power distribution system. Attention is given to power generation characteristics, the control characteristics, the harmonics characteristics, aspects of coordination with the power network, and questions regarding the reliability of photovoltaic modules.

The gallium melting-point standard: its role in manufacture and quality control of electronic thermometers for the clinical laboratory.

PubMed

Sostman, H E

1977-01-01

I discuss the traceability of calibration of electronic thermometers to thermometric constants of nature or to the National Bureau of Standards, form a manufacturer's basic standards through the manufacturing process to the user's laboratory. Useful electrical temperature sensors, their advantages, and means for resolving their disadvantages are described. I summarize our development of a cell for realizing the melting phase equilibrium of pure gallium (at 29.770 degrees C) as a thermometer calibration fixed point, and enumerate its advantages in the routine calibration verification of electrical thermometers in the clinical chemistry laboratory.

Application of active controls technology to aircraft bide smoothing systems

NASA Technical Reports Server (NTRS)

Lapins, M.; Jacobson, I. D.

1975-01-01

A critical review of past efforts in the design and testing of ride smoothing and gust alleviation systems is presented. Design trade offs involving sensor types, choice of feedback loops, human comfort, and aircraft handling-qualities criteria are discussed. Synthesis of a system designed to employ direct-lift and side-force producing surfaces is reported. Two STOL aircraft and an executive transport are considered. Theoretically predicted system performance is compared with hybrid simulation and flight test data. Pilot opinion rating, pilot workload, and passenger comfort rating data for the basic and augmented aircraft are included.

PACE team response shows a disregard for the principles of science.

PubMed

Edwards, Jonathan

2017-08-01

The PACE trial of cognitive behavioural therapy and graded exercise therapy for chronic fatigue syndrome/myalgic encephalomyelitis has raised serious questions about research methodology. An editorial article by Geraghty gives a fair account of the problems involved, if anything understating the case. The response by White et al. fails to address the key design flaw, of an unblinded study with subjective outcome measures, apparently demonstrating a lack of understanding of basic trial design requirements. The failure of the academic community to recognise the weakness of trials of this type suggests that a major overhaul of quality control is needed.

Application of Active Controls Technology to Aircraft Ride Smoothing Systems

NASA Technical Reports Server (NTRS)

Lapins, Maris; Jacobson, Ira D.

1975-01-01

A critical review of past efforts in the design and testing of ride smoothing and gust alleviation systems is presented. Design trade-offs involving sensor types, choice of feedback loops, human comfort and aircraft handling-qualities criteria are discussed. Synthesis of a system designed to employ direct-lift and side-force producing surfaces is reported. Two STOL-class aircraft and an executive transport are considered. Theoretically-predicted system performance is compared with hybrid simulation and flight test data. Pilot opinion rating, pilot workload, and passenger comfort rating data for the basic and augmented aircraft are included.

75 FR 27547 - Notice of Reestablishment of the Secretary of Energy Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-17

... management, basic science, research, development and technology activities; energy and national security... basis of their broad competence in areas relating to quality management, basic science, renewable energy, energy policy, environmental science, economics, and broad public policy interests. Membership of the...

Scheduling algorithms for automatic control systems for technological processes

NASA Astrophysics Data System (ADS)

Chernigovskiy, A. S.; Tsarev, R. Yu; Kapulin, D. V.

2017-01-01

Wide use of automatic process control systems and the usage of high-performance systems containing a number of computers (processors) give opportunities for creation of high-quality and fast production that increases competitiveness of an enterprise. Exact and fast calculations, control computation, and processing of the big data arrays - all of this requires the high level of productivity and, at the same time, minimum time of data handling and result receiving. In order to reach the best time, it is necessary not only to use computing resources optimally, but also to design and develop the software so that time gain will be maximal. For this purpose task (jobs or operations), scheduling techniques for the multi-machine/multiprocessor systems are applied. Some of basic task scheduling methods for the multi-machine process control systems are considered in this paper, their advantages and disadvantages come to light, and also some usage considerations, in case of the software for automatic process control systems developing, are made.

Digital control of highly augmented combat rotorcraft

NASA Technical Reports Server (NTRS)

Tischler, Mark B.

1987-01-01

Proposed concepts for the next generation of combat helicopters are to be embodied in a complex, highly maneuverable, multiroled vehicle with avionics systems. Single pilot and nap-of-the-Earth operations require handling qualities which minimize the involvement of the pilot in basic stabilization tasks. To meet these requirements will demand a full authority, high-gain, multimode, multiply-redundant, digital flight-control system. The gap between these requirements and current low-authority, low-bandwidth operational rotorcraft flight-control technology is considerable. This research aims at smoothing the transition between current technology and advanced concept requirements. The state of the art of high-bandwidth digital flight-control systems are reviewed; areas of specific concern for flight-control systems of modern combat are exposed; and the important concepts are illustrated in design and analysis of high-gain, digital systems with a detailed case study involving a current rotorcraft system. Approximate and exact methods are explained and illustrated for treating the important concerns which are unique to digital systems.

NATIONAL EXPOSURE RESEARCH LABORATORY (NERL) INTEGRATED INFORMATOIN AND QUALITY MANAGEMENT PLAN TRAINING

EPA Science Inventory

The success of the NERL quality system relies on participation by all managers and staff. This training was developed for the purpose of communicating the basic features of the quality system in a convenient and efficient manner. The total time to complete a review of all five ...

Water Quality Indicators Guide [and Teacher's Handbook]: Surface Waters.

ERIC Educational Resources Information Center

Terrell, Charles R.; Perfetti, Patricia Bytnar

This guide aids in finding water quality solutions to problems from sediment, animal wastes, nutrients, pesticides, and salts. The guide allows users to learn the fundamental concepts of water quality assessment by extracting basic tenets from geology, hydrology, biology, ecology, and wastewater treatment. An introduction and eight chapters are…

DOES SCHOOL INTEGRATION CONFLICT WITH QUALITY EDUCATION.

ERIC Educational Resources Information Center

DODSON, DAN W.

ONLY THROUGH QUALITY EDUCATION PROVIDED IN RACIALLY BALANCED SCHOOLS WILL CHILDREN OF DIFFERENT CULTURAL AND RACIAL BACKGROUNDS LEARN THE CITIZENSHIP SKILLS NEEDED IN CONTEMPORARY SOCIETY. THE BASIC ISSUE FOR EDUCATION IS THE NEED TO PROVIDE NEGROES WITH GENUINE QUALITY EDUCATION WHICH WILL EQUIP THEM FOR ENTRY INTO THE MIDDLE CLASS LEVEL OF…

An Effective Time and Management Strategy in Quality Circles.

ERIC Educational Resources Information Center

Halverson, Don E.

Contending that participation in quality circles enhances effective time management by school administrators and teachers, this guide provides both a theoretical briefing and practical recommendations for better time management. A pre- posttest prefaces a review of basic concepts of quality circles with reference to the work of Abraham Maslow,…

Quality Assurance Systems, TQM, and the New Collegialism.

ERIC Educational Resources Information Center

Harvey, Lee

This report discusses the application of the International Organization for Standards's ISO9000 quality assurance standard and Total Quality Management (TQM) to higher education in light of the "new collegialism." It defines the basic elements of ISO9000 and TQM, reviews the strengths and weaknesses of both approaches, and notes efforts…

Quality Management Plus: The Continuous Improvement of Education.

ERIC Educational Resources Information Center

Kaufman, Roger; Zahn, Douglas

This book applies quality management, an organizational theory that has been successful in business and industry, to education. Chapter 1 describes the basic elements of quality management (QM)--continuous improvement, client satisfaction, positive return on investment, and doing it right the first and every time. Ways to implement Deming's 14…

Training Methods and Training Instructors' Qualification Are Related to Recruits' Fitness Development During Basic Military Training.

PubMed

Roos, Lilian; Hofstetter, Marie-Claire; Mäder, Urs; Wyss, Thomas

2015-11-01

Adequate physical fitness is essential for successful military service. Military organizations worldwide therefore make continuous efforts to improve their army's physical training (PT) programs. To investigate the effect of the training methods and the qualification of PT instructors on the development of recruits' physical fitness, the present study compared the outcomes of 2 training groups. Both study groups participated in approximately 145 minutes per week of PT. The control group executed the standard army PT prepared and supervised by army PT instructors. Content of the PT in the intervention group was similar to that of the control group, but their training sessions' methods were different. Their training sessions were organized, prepared, and delivered by more and better-qualified supervisors (tertiary-educated physical education teachers). After 10 weeks of training, the participants of the intervention group experienced a significantly greater physical fitness improvement than those of the control group (positive change in endurance 32 and 17%, balance 30 and 21%, and core strength 74 and 45%, respectively). In both groups, the recruits with the lowest initial fitness levels significantly increased their performance. In the intervention group, but not the control, one-third of the recruits with the highest initial fitness levels were able to further improve their general fitness performance. This study demonstrates that the training methods and quality of instruction during PT sessions are relevant for recruits' fitness development in basic military training.

Optimization of the incubation time and temperature for spermatozoa extraction in freshwater crayfish Pontastacus leptodactylus (Eschscholtz, 1823).

PubMed

Farhadi, Ardavan; Harlıoğlu, Muzaffer Mustafa; Gür, Seyfettin; Acısu, Tutku Can

2018-06-01

Determination and control of spermatozoa quality in crustacean aquaculture is an important issue for successful and controlled reproduction. Investigation of spermatozoa number in spermatophores is a basic and common parameter for determining the reproductive quality in farmed decapods. In the present study, spermatozoa extraction from spermatophores located in the ductus deferens was conducted in Pontastacus leptodactylus using different incubation times and temperatures. The results indicate that the duration of incubation and temperature affected (P < 0.05) spermatozoa extraction. Greater temperatures (40 and 75 °C) resulted in a reduction (P < 0.05) in number of extracted spermatozoa. In contrast, more spermatozoa were extracted when the 4 and 23 °C temperatures were imposed. After 4 h of incubation, the number of extracted spermatozoa were greatest in number at 23 °C. In conclusion, the greater numbers of crayfish spermatozoa can be obtained when the ductus deferens containing spermatophores is incubated at 23 °C for 4 h as compared with other temperatures and incubation durations. The results of present study are useful for assessing spermatozoa quality in aquaculture as well as the extraction of spermatozoa for research purposes. Copyright © 2018 Elsevier B.V. All rights reserved.

Shelf life extension of Pacific white shrimp (Litopenaeus vannamei) using chitosan and ε-polylysine during cold storage.

PubMed

Na, Soyoung; Kim, Jin-Hee; Jang, Hye-Jin; Park, Hee Jung; Oh, Se-Wook

2018-05-01

In this study, we examined the effects of an ε-polylysine (PL) and chitosan (CH) coating on the quality of shrimp under refrigeration. Pacific white shrimp (Litopenaeus vannamei) were coated with PL, CH, or CH + PL and stored at 4 °C for 15 days. The quality of shrimp was measured by observing changes in microbiota, pH, total volatile basic nitrogen (TVB-N), and sensory characteristics. Among the coating films, the CH + PL coating most effectively inhibited the growth of mesophilic and psychrotrophic bacteria, Pseudomonas spp., and H 2 S-producing bacteria. This coating increased the shelf life of shrimp by decreasing the amount of mesophilic and psychrotrophic bacteria, with inhibition greater than three log cycles on the ninth day of storage. In addition, the CH and CH + PL coatings effectively suppressed the formation of TVB-N compared with that in the control by 43% and 30%, respectively. The pH of all treated samples increased slowly compared with that of the control, but no significant difference was observed. Sensory quality was similar to microbial and physicochemical properties, and the acceptability of all treated samples gradually decreased. Copyright © 2018. Published by Elsevier B.V.

The new Israeli feed safety law: challenges in relation to animal and public health.

PubMed

Barel, Shimon; Elad, Dani; Cuneah, Olga; Shimshoni, Jakob A

2017-03-01

The Israeli feed safety legislation, which came to prominence in the early 1970s, has undergone a major change from simple feed safety and quality regulations to a more holistic concept of control of feed safety and quality throughout the whole feed production chain, from farm to the end user table. In February 2014, a new law was approved by the Israeli parliament, namely the Control of Animal Feed Law, which is expected to enter into effect in 2017. The law is intended to regulate the production and marketing of animal feed, guaranteeing the safety and quality of animal products throughout the production chain. The responsibility on the implementation of the new feed law was moved from the Plant Protection Inspection Service to the Veterinary Services and Animal Health. In preparation for the law's implementation, we have characterized the various sources and production lines of feed for farm and domestic animals in Israel and assessed the current feed safety challenges in terms of potential hazards or undesirable substances. Moreover, the basic requirements for feed safety laboratories, which are mandatory for analyzing and testing for potential contaminants, are summarized for each of the contaminants discussed. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Web usability evaluation on BloobIS website by using hallway usability testing method and ISO 9241:11

NASA Astrophysics Data System (ADS)

Dwi Susanto, Tony; Ingesti Prasetyo, Anisa; Astuti, Hanim Maria

2018-03-01

At this moment, the need for web as an information media is highly important. Not only confined in the infotainment area, government, and education, but health as well uses the web media as a medium for providing information effectively. BloobIS is a web based application which integrates blood supply and distribution information at the Blood Transfusion Unit. Knowing how easy information is on BloobIS is marked by how convenient the website is used. Up until now, the BloobIS website is nearing completion but testing has not yet been performed to users and is on the testing and development phase in the Development Life Cycle software. Thus, an evaluation namely the quality control software which focuses on the perspective of BloobIs web usability is required. Hallway Usability Testing and ISO 9241:11 are the methods chosen to measure the BloobIS application usability. The expected outputs of the quality control software focusing on the usability evaluation are being able to rectify the usability deficiencies on the BloobIs web and provide recommendations to develop the web as a basic BloobIS web quality upgraed which sets a goal to amplify the satisfaction of web users based on usability factors in ISO 9241:11.

QCScreen: a software tool for data quality control in LC-HRMS based metabolomics.

PubMed

Simader, Alexandra Maria; Kluger, Bernhard; Neumann, Nora Katharina Nicole; Bueschl, Christoph; Lemmens, Marc; Lirk, Gerald; Krska, Rudolf; Schuhmacher, Rainer

2015-10-24

Metabolomics experiments often comprise large numbers of biological samples resulting in huge amounts of data. This data needs to be inspected for plausibility before data evaluation to detect putative sources of error e.g. retention time or mass accuracy shifts. Especially in liquid chromatography-high resolution mass spectrometry (LC-HRMS) based metabolomics research, proper quality control checks (e.g. for precision, signal drifts or offsets) are crucial prerequisites to achieve reliable and comparable results within and across experimental measurement sequences. Software tools can support this process. The software tool QCScreen was developed to offer a quick and easy data quality check of LC-HRMS derived data. It allows a flexible investigation and comparison of basic quality-related parameters within user-defined target features and the possibility to automatically evaluate multiple sample types within or across different measurement sequences in a short time. It offers a user-friendly interface that allows an easy selection of processing steps and parameter settings. The generated results include a coloured overview plot of data quality across all analysed samples and targets and, in addition, detailed illustrations of the stability and precision of the chromatographic separation, the mass accuracy and the detector sensitivity. The use of QCScreen is demonstrated with experimental data from metabolomics experiments using selected standard compounds in pure solvent. The application of the software identified problematic features, samples and analytical parameters and suggested which data files or compounds required closer manual inspection. QCScreen is an open source software tool which provides a useful basis for assessing the suitability of LC-HRMS data prior to time consuming, detailed data processing and subsequent statistical analysis. It accepts the generic mzXML format and thus can be used with many different LC-HRMS platforms to process both multiple quality control sample types as well as experimental samples in one or more measurement sequences.

OsbZIP58, a basic leucine zipper transcription factor, regulates starch biosynthesis in rice endosperm.

PubMed

Wang, Jie-Chen; Xu, Heng; Zhu, Ying; Liu, Qiao-Quan; Cai, Xiu-Ling

2013-08-01

Starch composition and the amount in endosperm, both of which contribute dramatically to seed yield, cooking quality, and taste in cereals, are determined by a series of complex biochemical reactions. However, the mechanism regulating starch biosynthesis in cereal seeds is not well understood. This study showed that OsbZIP58, a bZIP transcription factor, is a key transcriptional regulator controlling starch synthesis in rice endosperm. OsbZIP58 was expressed mainly in endosperm during active starch synthesis. osbzip58 null mutants displayed abnormal seed morphology with altered starch accumulation in the white belly region and decreased amounts of total starch and amylose. Moreover, osbzip58 had a higher proportion of short chains and a lower proportion of intermediate chains of amylopectin. Furthermore, OsbZIP58 was shown to bind directly to the promoters of six starch-synthesizing genes, OsAGPL3, Wx, OsSSIIa, SBE1, OsBEIIb, and ISA2, and to regulate their expression. These findings indicate that OsbZIP58 functions as a key regulator of starch synthesis in rice seeds and provide new insights into seed quality control.

Quality control methodology for high-throughput protein-protein interaction screening.

PubMed

Vazquez, Alexei; Rual, Jean-François; Venkatesan, Kavitha

2011-01-01

Protein-protein interactions are key to many aspects of the cell, including its cytoskeletal structure, the signaling processes in which it is involved, or its metabolism. Failure to form protein complexes or signaling cascades may sometimes translate into pathologic conditions such as cancer or neurodegenerative diseases. The set of all protein interactions between the proteins encoded by an organism constitutes its protein interaction network, representing a scaffold for biological function. Knowing the protein interaction network of an organism, combined with other sources of biological information, can unravel fundamental biological circuits and may help better understand the molecular basics of human diseases. The protein interaction network of an organism can be mapped by combining data obtained from both low-throughput screens, i.e., "one gene at a time" experiments and high-throughput screens, i.e., screens designed to interrogate large sets of proteins at once. In either case, quality controls are required to deal with the inherent imperfect nature of experimental assays. In this chapter, we discuss experimental and statistical methodologies to quantify error rates in high-throughput protein-protein interactions screens.

Good manufacturing practice and viral safety.

PubMed

Kerner, B

1995-07-01

The concept of virus inactivation during the manufacture of blood products raises questions about possible recontamination of the product by the environment. A strict regime of good manufacturing practice (GMP) is mandatory. The guidelines originally issued by the World Health Organization (WHO), and now law in most countries, are an excellent basis for the operation of a production plant. The following elements of GMP require special concern: (i) All functions shall be defined in a clear organization chart. (ii) Personnel shall be appropriately trained for the job and to perfect hygiene. (iii) Buildings and facilities, as well as supply systems, shall exclude the possibility of recontamination of already virus-inactivated materials. (iv) Equipment shall be easy to clean and fully sterilizable. (v) Production shall follow appropriate written procedures. (vi) The Quality Control Organization shall monitor the process by in-process controls and review the records for possible deviations. All GMP issues are coordinated by a Quality Assurance Organization that also reviews the overall performance of the operation. The maintenance of viral safety of the products basically depends upon the full commitment of all bodies involved to proper and non-negotiable GMP.

Analysis of ChIP-seq Data in R/Bioconductor.

PubMed

de Santiago, Ines; Carroll, Thomas

2018-01-01

The development of novel high-throughput sequencing methods for ChIP (chromatin immunoprecipitation) has provided a very powerful tool to study gene regulation in multiple conditions at unprecedented resolution and scale. Proactive quality-control and appropriate data analysis techniques are of critical importance to extract the most meaningful results from the data. Over the last years, an array of R/Bioconductor tools has been developed allowing researchers to process and analyze ChIP-seq data. This chapter provides an overview of the methods available to analyze ChIP-seq data based primarily on software packages from the open-source Bioconductor project. Protocols described in this chapter cover basic steps including data alignment, peak calling, quality control and data visualization, as well as more complex methods such as the identification of differentially bound regions and functional analyses to annotate regulatory regions. The steps in the data analysis process were demonstrated on publicly available data sets and will serve as a demonstration of the computational procedures routinely used for the analysis of ChIP-seq data in R/Bioconductor, from which readers can construct their own analysis pipelines.

The FDA's Experience with Emerging Genomics Technologies-Past, Present, and Future.

PubMed

Xu, Joshua; Thakkar, Shraddha; Gong, Binsheng; Tong, Weida

2016-07-01

The rapid advancement of emerging genomics technologies and their application for assessing safety and efficacy of FDA-regulated products require a high standard of reliability and robustness supporting regulatory decision-making in the FDA. To facilitate the regulatory application, the FDA implemented a novel data submission program, Voluntary Genomics Data Submission (VGDS), and also to engage the stakeholders. As part of the endeavor, for the past 10 years, the FDA has led an international consortium of regulatory agencies, academia, pharmaceutical companies, and genomics platform providers, which was named MicroArray Quality Control Consortium (MAQC), to address issues such as reproducibility, precision, specificity/sensitivity, and data interpretation. Three projects have been completed so far assessing these genomics technologies: gene expression microarrays, whole genome genotyping arrays, and whole transcriptome sequencing (i.e., RNA-seq). The resultant studies provide the basic parameters for fit-for-purpose application of these new data streams in regulatory environments, and the solutions have been made available to the public through peer-reviewed publications. The latest MAQC project is also called the SEquencing Quality Control (SEQC) project focused on next-generation sequencing. Using reference samples with built-in controls, SEQC studies have demonstrated that relative gene expression can be measured accurately and reliably across laboratories and RNA-seq platforms. Besides prediction performance comparable to microarrays in clinical settings and safety assessments, RNA-seq is shown to have better sensitivity for low expression and reveal novel transcriptomic features. Future effort of MAQC will be focused on quality control of whole genome sequencing and targeted sequencing.

The FDA’s Experience with Emerging Genomics Technologies—Past, Present, and Future

PubMed Central

Xu, Joshua; Thakkar, Shraddha; Gong, Binsheng; Tong, Weida

2016-01-01

The rapid advancement of emerging genomics technologies and their application for assessing safety and efficacy of FDA-regulated products require a high standard of reliability and robustness supporting regulatory decision-making in the FDA. To facilitate the regulatory application, the FDA implemented a novel data submission program, Voluntary Genomics Data Submission (VGDS), and also to engage the stakeholders. As part of the endeavor, for the past 10 years, the FDA has led an international consortium of regulatory agencies, academia, pharmaceutical companies, and genomics platform providers, which was named MicroArray Quality Control Consortium (MAQC), to address issues such as reproducibility, precision, specificity/sensitivity, and data interpretation. Three projects have been completed so far assessing these genomics technologies: gene expression microarrays, whole genome genotyping arrays, and whole transcriptome sequencing (i.e., RNA-seq). The resultant studies provide the basic parameters for fit-for-purpose application of these new data streams in regulatory environments, and the solutions have been made available to the public through peer-reviewed publications. The latest MAQC project is also called the SEquencing Quality Control (SEQC) project focused on next-generation sequencing. Using reference samples with built-in controls, SEQC studies have demonstrated that relative gene expression can be measured accurately and reliably across laboratories and RNA-seq platforms. Besides prediction performance comparable to microarrays in clinical settings and safety assessments, RNA-seq is shown to have better sensitivity for low expression and reveal novel transcriptomic features. Future effort of MAQC will be focused on quality control of whole genome sequencing and targeted sequencing. PMID:27116022

Randomized Controlled Trial of BASICS for Heavy Drinking Mandated and Volunteer Undergraduates: 12-Month Outcomes

PubMed Central

Terlecki, Meredith A.; Buckner, Julia D.; Larimer, Mary E.; Copeland, Amy L.

2014-01-01

This is the first randomized trial testing whether heavy drinking undergraduates mandated to the Brief Alcohol Screening and Intervention for College Students (BASICS) program following a campus alcohol violation would benefit as much as heavy drinking volunteers up to one year post-intervention using control groups with high-risk drinkers to model disciplinary-related and naturalistic changes in drinking. Participants (61% male; 51% mandated; 84% Caucasian; Mage = 20.14 years) were screened for heavy drinking and randomized to BASICS (n = 115) or assessment-only control (n = 110). Outcome measures (drinking, alcohol problems) were collected at baseline, 4 weeks, 3, 6, and 12 months post-intervention. At 4 weeks post-intervention, intent-to-treat multilevel longitudinal models showed that regardless of referral group (mandated or volunteer) BASICS significantly decreased weekly drinking, typical drinks, and peak drinks relative to controls (ds = .41-.92). BASICS had a large effect on decreases in alcohol problems (d = .87). At 12 months post-intervention, BASICS participants (regardless of referral group) reported significantly fewer alcohol problems (d = .56) compared to controls. Significant long-term intervention gains for peak and typical drinks were sustained in both referral groups relative to controls (ds = .42; .11). Referral group had no significant main effect and did not interact with intervention condition to predict outcomes. Given that BASICS was associated with less drinking and fewer alcohol problems (even among heavier drinking mandated students up to one year post-intervention), provision of BASICS-style programs within disciplinary settings may help reduce heavy and problematic drinking among at-risk students. PMID:25844834

Application of the Recreation Opportunity Spectrum for Outdoor Recreation Planning on Army Installations.

DTIC Science & Technology

1982-03-01

to preference types, and uses capacity estimation; therefore, it is basically a good system for recreation and resource inventory and classification...quan- tity, and distribution of recreational resources. Its basic unit of inventory is landform, or the homogeneity of physical features used to...by Clark and Stankey, "the basic assumption underlying the ROS is that quality recreational experiences are best assured by providing a diverse set of

Deficits in auditory processing contribute to impairments in vocal affect recognition in autism spectrum disorders: A MEG study.

PubMed

Demopoulos, Carly; Hopkins, Joyce; Kopald, Brandon E; Paulson, Kim; Doyle, Lauren; Andrews, Whitney E; Lewine, Jeffrey David

2015-11-01

The primary aim of this study was to examine whether there is an association between magnetoencephalography-based (MEG) indices of basic cortical auditory processing and vocal affect recognition (VAR) ability in individuals with autism spectrum disorder (ASD). MEG data were collected from 25 children/adolescents with ASD and 12 control participants using a paired-tone paradigm to measure quality of auditory physiology, sensory gating, and rapid auditory processing. Group differences were examined in auditory processing and vocal affect recognition ability. The relationship between differences in auditory processing and vocal affect recognition deficits was examined in the ASD group. Replicating prior studies, participants with ASD showed longer M1n latencies and impaired rapid processing compared with control participants. These variables were significantly related to VAR, with the linear combination of auditory processing variables accounting for approximately 30% of the variability after controlling for age and language skills in participants with ASD. VAR deficits in ASD are typically interpreted as part of a core, higher order dysfunction of the "social brain"; however, these results suggest they also may reflect basic deficits in auditory processing that compromise the extraction of socially relevant cues from the auditory environment. As such, they also suggest that therapeutic targeting of sensory dysfunction in ASD may have additional positive implications for other functional deficits. (c) 2015 APA, all rights reserved).

42 CFR 1007.5 - Basic requirement.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Basic requirement. 1007.5 Section 1007.5 Public... STATE MEDICAID FRAUD CONTROL UNITS § 1007.5 Basic requirement. A State Medicaid fraud control unit must... requirements of §§ 1007.7 through 1007.13 of this part. ...

Supporting tobacco control: stimulating local newspaper coverage with a technical assistance website for local coalitions.

PubMed

Buller, David B; Bettinghaus, Erwin P; Helme, Donald; Young, Walter F; Borland, Ron; Maloy, Julie A; Cutter, Gary R; Andersen, Peter A; Walther, Joseph B

2011-11-01

A large and growing literature confirms that well-designed web-based programs can be effective in preventing or treating several chronic diseases. This study examined how the Internet can deliver information and train community activists and specifically tested the effects of web-based technical assistance on local tobacco control coalitions' efforts to use media advocacy to advance their agendas. The authors compared a highly interactive, Enhanced website (intervention) to a noninteractive, Basic text-based website (comparison) in Colorado communities. A total of 24 tobacco control coalitions led by local county health departments and nursing services were enrolled in the project and randomly assigned to use either the intervention or comparison website. A total of 73 local daily and weekly newspapers were identified in the service areas of 23 of the 24 coalitions. A posttest assessment of newspaper coverage was conducted to locate all newspaper articles with tobacco control information published between January 1 and April 9, 2004, the last 3 months of the intervention. Although there was no evidence of a treatment effect on the frequency of newspaper articles on tobacco-related issues, there was, however, evidence that newspapers in counties where the coalition had access to the Enhanced website printed more stories focused on local/regional issues and more anti-tobacco local/regional stories than in the counties where coalitions had access to the Basic website. Coalitions can improve their influence on local media for community tobacco control when high-quality online technical assistance, training, and resources are available to them.

Comparative Analysis of Reconstructed Image Quality in a Simulated Chromotomographic Imager

DTIC Science & Technology

2014-03-01

quality . This example uses five basic images a backlit bar chart with random intensity, 100 nm separation. A total of 54 initial target...compared for a variety of scenes. Reconstructed image quality is highly dependent on the initial target hypercube so a total of 54 initial target...COMPARATIVE ANALYSIS OF RECONSTRUCTED IMAGE QUALITY IN A SIMULATED CHROMOTOMOGRAPHIC IMAGER THESIS

School-Based Management: An Approach to Decision-Making Quality in Egyptian General Secondary Schools

ERIC Educational Resources Information Center

Elmelegy, Reda Ibrahim

2015-01-01

The current research aims at clarifying how school-based management (SBM) can contribute to achieve the decision-making quality in Egyptian general secondary schools and determine the requirements of quality decision-making. It depends on the descriptive method in order to acknowledge the basics of the SBM and its relationship with the quality of…

X-31 quasi-tailless flight demonstration

NASA Technical Reports Server (NTRS)

Huber, Peter; Schellenger, Harvey G.

1994-01-01

The primary objective of the quasi-tailless flight demonstration is to demonstrate the feasibility of using thrust vectoring for directional control of an unstable aircraft. By using this low-cost, low-risk approach it is possible to get information about required thrust vector control power and deflection rates from an inflight experiment as well as insight in low-power thrust vectoring issues. The quasi-tailless flight demonstration series with the X-31 began in March 1994. The demonstration flight condition was Mach 1.2 at 37,500 feet. A series of basic flying quality maneuvers, doublets, bank to bank rolls, and wind-up-turns have been performed with a simulated 100% vertical tail reduction. Flight test and supporting simulation demonstrated that the quasi-tailless approach is effective in representing the reduced stability of tailless configurations. The flights also demonstrated that thrust vectoring could be effectively used to stabilize a directionally unstable configuration and provide control power for maneuver coordination.

Recent progress and future direction of cancer epidemiological research in Japan.

PubMed

Sobue, Tomotaka

2015-06-01

In 2006, the Cancer Control Act was approved and a Basic Plan, to Promote the Cancer Control Program at the national level, was developed in 2007. Cancer research is recognized as a fundamental component to provide evidence in cancer control program. Cancer epidemiology plays central role in connecting research and policy, since it directly deals with data from humans. Research for cancer epidemiology in Japan made substantial progress, in the field of descriptive studies, cohort studies, intervention studies and activities for summarizing evidences. In future, promoting high-quality large-scale intervention studies, individual-level linkage studies, simulation models and studies for elderly population will be of great importance, but at the same time research should be promoted in well-balanced fashion not placing too much emphasis on one particular research field. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

76 FR 58293 - Rate Adjustments for Indian Irrigation Projects

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-20

... 1st Avenue, Parker, AZ 85344, Telephone: (928) 669-7111. Duck Valley Irrigation Project.... Joseph...-feet. Duck Valley Irrigation Project. Basic per acre.... 5.30 5.30 Fort Yuma Irrigation Project Basic...)). Information Quality Act In developing this notice, we did not conduct or use a study, experiment, or survey...

Closures and Consolidation

ERIC Educational Resources Information Center

Haiming, Liu; Gaowa, Naren; Shu, Wang

2013-01-01

With the advancements of nine years of universal compulsory education, the development of China's basic education has resulted in new demands aimed at improving the overall quality of basic education in rural areas. Closings and consolidation are important measures in this regard. In the process of merging and consolidation, the construction of a…

Basic Education and Policy Support (BEPS) Activity.

ERIC Educational Resources Information Center

Creative Associates International, Inc., Washington, DC.

The Basic Education and Policy Support (BEPS) Activity is a multi-year, worldwide, indefinite quantity contract by which the U.S. Agency for International Development (USAID) Global Bureau Center for Human Capacity (G/HCD) can work to achieve four objectives: (1) improve the quality, efficiency, access, and equity of education, particularly basic…

Program Evaluation for USAID/Guinea Basic Education Program Portfolio

ERIC Educational Resources Information Center

Midling, Michael; Filion, Louise; David-Gnahoui, Emmanuel M.; Gassama-Mbaye, Mbarou; Diallo, Amadou Tidjane; Diallo, Abdoul Karim

2006-01-01

In support of its strategic objective of a quality basic education provided to a larger percentage of Guinean children with an emphasis on girls and rural children, the United States Agency for International Development established the following intermediate results: (1) Improved sectoral strategic planning, management, and decision-making in…

Sputnik Reform Revisited.

ERIC Educational Resources Information Center

Strickland, Charles E.

1985-01-01

Educational reforms being called for in the 1980's are compared to reforms of the 1950's. The Sputnik-inspired quest for quality called for reform in the content and structure of basic subjects. Current reports say that what educators are doing in the basic subjects is ok, but they need to do more. (RM)

The BEST Blueprint. Quality ABE in the Workplace.

ERIC Educational Resources Information Center

Westberry, Susan

The Basic Educational Skills Training (BEST) workplace literacy demonstration model was designed to provide adult basic education (ABE) services simultaneously for multiple employers in Maury County, Tennessee. The BEST model focused on job-related instruction. The goal of the program was to achieve increased safety, productivity, and employee…

Colorado Employability Skills Survey. Report of Results.

ERIC Educational Resources Information Center

Hulsart, Richard; Bauman, Paul

Interviews were conducted with employers and military personnel to obtain information regarding basic skills needed in entry-level jobs available to young people with a high school education. Information was also obtained from young entry-level employees and military recruits on the quality of their high school preparation in basic employment…

Organizational Culture in Adult Basic Education in the Netherlands.

ERIC Educational Resources Information Center

Berg, M. J. M. van den

Recent legislation on adult basic education (ABE) in the Netherlands has two important aims: to offer one uniform organizational financial structure and to improve educational quality. ABE institutes have concentrated on restructuring the organization and merging the precursors. The change in structure is supported by a change in organizational…

A home-based exercise program to improve function, fatigue, and sleep quality in patients with Stage IV lung and colorectal cancer: a randomized controlled trial.

PubMed

Cheville, Andrea L; Kollasch, Jenny; Vandenberg, Justin; Shen, Tiffany; Grothey, Axel; Gamble, Gail; Basford, Jeffrey R

2013-05-01

Exercise benefits patients with cancer, but studies of home-based approaches, particularly among those with Stage IV disease, remain small and exploratory. To conduct an adequately powered trial of a home-based exercise intervention that can be facilely integrated into established delivery and reimbursement structures. Sixty-six adults with Stage IV lung or colorectal cancer were randomized, in an eight-week trial, to usual care or incremental walking and home-based strength training. The exercising participants were instructed during a single physiotherapy visit and subsequently exercised four days or more per week; training and step-count goals were advanced during bimonthly telephone calls. The primary outcome measure was mobility assessed with the Ambulatory Post Acute Care Basic Mobility Short Form. Secondary outcomes included ratings of pain and sleep quality as well as the ability to perform daily activities (Ambulatory Post Acute Care Daily Activities Short Form), quality of life (Functional Assessment of Cancer Therapy-General), and fatigue (Functional Assessment of Cancer Therapy-Fatigue). Three participants dropped out and seven died (five in the intervention and two in the control group, P=0.28). At Week 8, the intervention group reported improved mobility (P=0.01), fatigue (P=0.02), and sleep quality (P=0.05) compared with the usual care group, but did not differ on the other measures. A home-based exercise program seems capable of improving the mobility, fatigue, and sleep quality of patients with Stage IV lung and colorectal cancer. Copyright © 2013. Published by Elsevier Inc.

Establishment of local diagnostic reference levels for quality control in intraoral radiography.

PubMed

Izawa, Maki; Harata, Yasuo; Shiba, Noriyoshi; Koizumi, Nobuhide; Ozawa, Tomonori; Takahashi, Nobutoshi; Okumura, Yasuhiko

2017-01-01

To investigate the dosage and imaging conditions for patients undergoing intraoral radiography at Meikai University Hospital and establish assurance and quality control data. Tube voltage, exposure time, and air kinetic energy released per unit mass (air kerma) of three intraoral radiography units were measured. To calculate the patient entrance dose (PED) for each radiograph using Insight film, we extracted data for 1063 patients from their exposure records. The PED was compared with the diagnostic reference level (DRL) from the European Commission and the UK. The tube voltage of the three units was maintained at 60 ± 2 kV. Differences in exposure time were less than 1.7 % for all units. The air kerma rates were well maintained within a 4.2 % error. Based on the patient data, there were no significant differences in the mean exposure times for males and females for all anatomical sites. The mean PED ranged from 1.09 ± 0.31 mGy for the mandibular incisors to 2.42 ± 0.33 mGy for the maxillary molars. The mean PED at the mandibular molars using InSight film was 1.59 ± 0.20 mGy, being less than the recommended value based on the DRL for intraoral radiography in the UK. We concluded that radiographic conditions at the hospital have been properly maintained. This basic quality control data may assist other dental radiation facilities to reduce patient dosage.

Effects of peatland burning on hydrology, water quality and aquatic ecosystems

NASA Astrophysics Data System (ADS)

Brown, L. E.; Holden, J.; Palmer, S. M.

2009-04-01

Controlled burning is used worldwide for the management of vegetation, yet there is serious concern about the environmental implications of such practices. Across the UK many peatlands are burned to encourage and maintain heather growth. However, detailed evaluations of the costs, benefits and sustainability of burning are hampered by a lack of basic scientific data. This paper will present the outline of a new three year NERC-funded project called EMBER which provides the first co-ordinated evaluation of vegetation burning on peatland hydrological and ecological processes. Case study sites influenced by prescribed burns will be established in internationally important sites in the Peak District and North Pennines, UK. EMBER will increase understanding of the processes linking prescribed peat vegetation fires, hydrology, water quality and stream invertebrate communities in upland peat dominated catchments. Four work packages will aim to: 1) increase understanding of the effects of moorland patch burning on the hydrology and physicochemistry of peat, through examination of changes in soil hydrology and water quality; 2) provide a better understanding of the effects of moorland patch burning on basin runoff quantity and quality, through examination of river flow regimes, suspended sediment concentration and water chemistry; 3) assess the influence of changes in stream hydrology, water quality and sediment fluxes on stream ecosystems through examination of stream invertebrate community biodiversity and fish abundance and 4) gain a more fundamental understanding of some environmental drivers of upland aquatic community response to burning by experimentally manipulating fine sediment flux under controlled conditions using a series of streamside mesocosms. Taken together these packages will provide a holistic patch- to basin-scale evaluation of burning from the perspective of peat hydrology, chemistry, river water quantity and quality, and stream ecosystems, thus providing the balanced knowledge base which is currently lacking for peatlands.

Do brain lesions in stroke affect basic emotions and attachment?

PubMed

Farinelli, Marina; Panksepp, Jaak; Gestieri, Laura; Maffei, Monica; Agati, Raffaele; Cevolani, Daniela; Pedone, Vincenzo; Northoff, Georg

2015-01-01

The aim of the current study was to investigate basic emotions and attachment in a sample of 86 stroke patients. We included a control group of 115 orthopedic patients (matched for age and cognitive status) without brain lesions to control for unspecific general illness effects of a traumatic recent event on basic emotions and attachment. In order to measure basic emotions and attachment style we applied the Affective Neuroscience Personality Scale (ANPS) and the Attachment Style Questionnaire (ASQ). The stroke patients showed significantly different scores in the SEEKING, SADNESS, and ANGER subscales of the ANPS as well as in the Relationship as Secondary Attachment dimension of the ASQ when compared to the control group. These differences show a pattern influenced by lesion location mainly as concerns basic emotions. Anterior, medial, left, and subcortical patients provide scores significantly lower in ANPS-SEEKING than the control group; ANPS-SADNESS scores in anterior, right, medial, and subcortical patients were significantly higher than those of the control group. ANPS-ANGER scores in posterior, right, and lateral patients were significantly higher than those in the control group; finally, the ANPS-FEAR showed slightly lower scores in posterior patients than in the control group. Minor effects on brain lesions were also individuated in the attachment style. Anterior lesion patients showed a significantly higher average score in the ASQ-Need for Approval subscale than the control group. ASQ-Confidence subscale scores differed significantly in stroke patients with lesions in medial brain regions when compared to control subjects. Scores at ANPS and ASQ subscales appear significantly more correlated in stroke patients than in the control group. Such finding of abnormalities, especially concerning basic emotions in stroke brain-lesioned patients, indicates that the effect of brain lesions may enhance the interrelation between basic emotions and attachment with respect to the control group.

[Association between sleep quality and life function among elderly community residents].

PubMed

Tanaka, Mika; Kusaga, Mari; Tagaya, Hirokuni; Miyoko, I; Oshima, Asami; Watanabe, Chiho

2012-01-01

To investigate the association between sleep quality and life function in an elderly Japanese population. A total of 563 residents of a village in Kumamoto Prefecture aged ≥65 years were asked to fill out a self-administered questionnaire survey from June to July 2010. Sleep quality and life function were respectively evaluated using the Pittsburgh Sleep Quality Index (PSQI) and Basics Check List, which is used to screen elderly individuals at high risk of needing long-term care in the future. As adjustment factors, age, sex, economic situation, residency status, medical history, depression status, and cognitive function were assessed. We examined the relationship between sleep quality and life function using multiple logistic regression analysis, with life function as a dependent variable. Subjects already receiving care or with psychiatric disorders or severe cognitive disturbance were excluded from analysis. Among the subjects (n=395), a significant relationship was found between poor sleep quality and impaired life function in all models. The odds ratio was 1.82 (95% confidence interval: 1.03-3.23) in the final model controlling for all adjustment factors. Our findings here suggest a significant relationship between poor sleep quality and impaired life function among elderly community residents. Given these findings, intervention to improve sleep may help delay or prevent the need for long-term care among elderly individuals.

Multimodal imaging of the self-regulating developing brain.

PubMed

Fjell, Anders M; Walhovd, Kristine Beate; Brown, Timothy T; Kuperman, Joshua M; Chung, Yoonho; Hagler, Donald J; Venkatraman, Vijay; Roddey, J Cooper; Erhart, Matthew; McCabe, Connor; Akshoomoff, Natacha; Amaral, David G; Bloss, Cinnamon S; Libiger, Ondrej; Darst, Burcu F; Schork, Nicholas J; Casey, B J; Chang, Linda; Ernst, Thomas M; Gruen, Jeffrey R; Kaufmann, Walter E; Kenet, Tal; Frazier, Jean; Murray, Sarah S; Sowell, Elizabeth R; van Zijl, Peter; Mostofsky, Stewart; Jernigan, Terry L; Dale, Anders M

2012-11-27

Self-regulation refers to the ability to control behavior, cognition, and emotions, and self-regulation failure is related to a range of neuropsychiatric problems. It is poorly understood how structural maturation of the brain brings about the gradual improvement in self-regulation during childhood. In a large-scale multicenter effort, 735 children (4-21 y) underwent structural MRI for quantification of cortical thickness and surface area and diffusion tensor imaging for quantification of the quality of major fiber connections. Brain development was related to a standardized measure of cognitive control (the flanker task from the National Institutes of Health Toolbox), a critical component of self-regulation. Ability to inhibit responses and impose cognitive control increased rapidly during preteen years. Surface area of the anterior cingulate cortex accounted for a significant proportion of the variance in cognitive performance. This finding is intriguing, because characteristics of the anterior cingulum are shown to be related to impulse, attention, and executive problems in neurodevelopmental disorders, indicating a neural foundation for self-regulation abilities along a continuum from normality to pathology. The relationship was strongest in the younger children. Properties of large-fiber connections added to the picture by explaining additional variance in cognitive control. Although cognitive control was related to surface area of the anterior cingulate independently of basic processes of mental speed, the relationship between white matter quality and cognitive control could be fully accounted for by speed. The results underscore the need for integration of different aspects of brain maturation to understand the foundations of cognitive development.

Evaluation of quality of routine physical examination in urban public basic schools in Khartoum State, Sudan.

PubMed

Alfadeel, Mona A; Hamid, Yassin H M; El Fadeel, Ogail Ata; Salih, Karimeldin M A

2015-01-01

The objectives of this study are to identify the availability of the service logistics in basic public schools (structure as quality concept), to assess steps of physical examination according to the ministry of health guidelines (process as quality concept) and to measure satisfaction of service consumers (pupils) and service providers (teacher and doctors). The study involved seven localities in Sudan using questionnaires and observations. The structure in form of material and human resources was not well maintained, equally the process and procedure of medical examination did not well fit with rules of quality, however, the satisfaction level was within the accepted level. As far as structure, process and outcome were concerned, we are still below the standards in developed countries for many reasons but the level of satisfaction in the present study is more or less similar as in else studies.

The design of the intelligent monitoring system for dam safety

NASA Astrophysics Data System (ADS)

Yuan, Chun-qiao; Jiang, Chen-guang; Wang, Guo-hui

2008-12-01

Being a vital manmade water-control structure, a dam plays a very important role in the living and production of human being. To make a dam run safely, the best design and the superior construction quality are paramount; moreover, with working periods increasing, various dynamic, alternative and bad loads generate little by little various distortions on the dam structure inevitably, which shall lead to potential safety problems or further a disaster (dam burst). There are many signs before the occurrence of a dam accident, so the timely and effective surveying on the distortion of a dam is important. On the basis of the cause supra, two intelligent (automatic) monitoring systems about the dam's safety based on the RTK-GPS technology and the measuring robot has been developed. The basic principle, monitoring method and monitoring process of these two intelligent (automatic) monitoring systems are introduced. It presents examples of monitor and puts forward the basic rule of dam warning based on data of actual monitor.

On-Line Ion Exchange Liquid Chromatography as a Process Analytical Technology for Monoclonal Antibody Characterization in Continuous Bioprocessing.

PubMed

Patel, Bhumit A; Pinto, Nuno D S; Gospodarek, Adrian; Kilgore, Bruce; Goswami, Kudrat; Napoli, William N; Desai, Jayesh; Heo, Jun H; Panzera, Dominick; Pollard, David; Richardson, Daisy; Brower, Mark; Richardson, Douglas D

2017-11-07

Combining process analytical technology (PAT) with continuous production provides a powerful tool to observe and control monoclonal antibody (mAb) fermentation and purification processes. This work demonstrates on-line liquid chromatography (on-line LC) as a PAT tool for monitoring a continuous biologics process and forced degradation studies. Specifically, this work focused on ion exchange chromatography (IEX), which is a critical separation technique to detect charge variants. Product-related impurities, including charge variants, that impact function are classified as critical quality attributes (CQAs). First, we confirmed no significant differences were observed in the charge heterogeneity profile of a mAb through both at-line and on-line sampling and that the on-line method has the ability to rapidly detect changes in protein quality over time. The robustness and versatility of the PAT methods were tested by sampling from two purification locations in a continuous mAb process. The PAT IEX methods used with on-line LC were a weak cation exchange (WCX) separation and a newly developed shorter strong cation exchange (SCX) assay. Both methods provided similar results with the distribution of percent acidic, main, and basic species remaining unchanged over a 2 week period. Second, a forced degradation study showed an increase in acidic species and a decrease in basic species when sampled on-line over 7 days. These applications further strengthen the use of on-line LC to monitor CQAs of a mAb continuously with various PAT IEX analytical methods. Implementation of on-line IEX will enable faster decision making during process development and could potentially be applied to control in biomanufacturing.

Generation of Long-time Complex Signals for Testing the Instruments for Detection of Voltage Quality Disturbances

NASA Astrophysics Data System (ADS)

Živanović, Dragan; Simić, Milan; Kokolanski, Zivko; Denić, Dragan; Dimcev, Vladimir

2018-04-01

Software supported procedure for generation of long-time complex test sentences, suitable for testing the instruments for detection of standard voltage quality (VQ) disturbances is presented in this paper. This solution for test signal generation includes significant improvements of computer-based signal generator presented and described in the previously published paper [1]. The generator is based on virtual instrumentation software for defining the basic signal parameters, data acquisition card NI 6343, and power amplifier for amplification of output voltage level to the nominal RMS voltage value of 230 V. Definition of basic signal parameters in LabVIEW application software is supported using Script files, which allows simple repetition of specific test signals and combination of more different test sequences in the complex composite test waveform. The basic advantage of this generator compared to the similar solutions for signal generation is the possibility for long-time test sequence generation according to predefined complex test scenarios, including various combinations of VQ disturbances defined in accordance with the European standard EN50160. Experimental verification of the presented signal generator capability is performed by testing the commercial power quality analyzer Fluke 435 Series II. In this paper are shown some characteristic complex test signals with various disturbances and logged data obtained from the tested power quality analyzer.

C5 palsy after posterior cervical decompression and fusion: cost and quality-of-life implications.

PubMed

Miller, Jacob A; Lubelski, Daniel; Alvin, Matthew D; Benzel, Edward C; Mroz, Thomas E

2014-12-01

C5 palsy is a debilitating postoperative complication of cervical decompression surgery. Although the prognosis is typically good, patients may be unable to perform basic activities of daily living, resulting in a decreased quality of life. No studies have investigated the quality-of-life and financial implications. The aim of the study was to determine the impact on quality-of-life and costs of C5 palsy after posterior cervical decompression and fusion (PCDF). A 2:1 matched retrospective cohort study was conducted at a single tertiary-care institution between 2007 and 2012. Individuals who had undergone PCDF were included. Self-reported: Euroqol-5 Dimensions quality-of-life survey. Physiologic: postoperative change in deltoid and biceps strength via manual muscle testing. Functional: cost of interventions and missed workdays postoperatively. Individuals with postoperative C5 palsy were matched to controls based on age, gender, body mass index, and diagnosis. Demographic, operative, postoperative, quality-of-life, and cost data were collected for both the C5 palsy and control groups, with 1-year follow-up. We reviewed 245 patients who underwent PCDF and 17 were identified (6.9%) with C5 palsy and matched to 34 controls. No significant differences in demographic or operative characteristics were observed between groups. The C5 palsy group had a significantly reduced capacity for self-care in the immediate postoperative (2.0±0.71 vs. 1.2±0.4, p<.001) and long-term (1.6±0.6 vs. 1.2±0.4, p=.004) periods and a significantly reduced capacity for completion of usual activities (2.4±0.7 vs. 1.9±0.6, p=.014) compared with controls. Furthermore, the C5 group had a significantly greater cost of physical/occupational therapy, an increase of $2,078 ($4,386±$2,801 vs. $2,307±$1,907, p=.013). There were no significant differences between groups in the cost of hospital stay, surgery, or other direct or indirect costs. Overall, there was a significantly greater cost ($1,918) for the C5 palsy group compared with the control group ($7,584±$3,992 vs. $5,666±$2,359, respectively, p=.038). This study represents the first quantification of the impact of C5 palsy on patients' quality of life and the associated costs for care. We found that C5 palsy adds a significant burden on patients' quality of life and presents a financial burden to the health-care system. Copyright © 2014 Elsevier Inc. All rights reserved.

School Quality, Educational Inequality and Economic Growth

ERIC Educational Resources Information Center

Rao, Ramesh; Jani, Rohana bt

2008-01-01

Realizing the importance of education in developing a country, many governments had begun to pay more attention in improving the education quality in their country. However whether the desired level of education quality is equally distributed is still debated on. On top of that, current literature on which level of education, either basic or…

Electrical impedance spectroscopy for quality assessment of meat and fish: A review on basic principles, measurement methods, and recent advances

USDA-ARS?s Scientific Manuscript database

Electrical impedance spectroscopy (EIS), as an effective analytical technique for electrochemical system, has shown a wide application for food quality and safety assessment recently. Individual differences of livestock cause high variation in quality of raw meat and fish and their commercialized pr...

Effects of a Creative Expression Intervention on Emotions, Communication, and Quality of Life in Persons with Dementia

PubMed Central

Phillips, Lorraine J.; Reid-Arndt, Stephanie A.; Pak, Youngju

2010-01-01

Background Effective nonpharmacological interventions are needed to treat neuropsychiatric symptoms and improve quality of life for the 5.3 million Americans affected by dementia. Objective To test the effect of a storytelling program, TimeSlips, on communication, neuropsychiatric symptoms, and quality of life in long-term care residents with dementia. Method A quasi-experimental, two-group, repeated measures design was used to compare persons with dementia who were assigned to the twice-weekly, 6-week TimeSlips intervention (n = 28) or usual care (n = 28) group at baseline and postintervention at Weeks 7 and 10. Outcome measures included the Cornell Scale for Depression in Dementia, Neuropsychiatric Inventory-Nursing Home Version, Functional Assessment of Communication Skills, Quality of Life–AD, and Observed Emotion Rating Scale (this last measure was collected also at Weeks 3 and 6 during TimeSlips for the treatment group and during mealtime for the control group). Results Compared to the control group, the treatment group exhibited significantly higher pleasure at Week 3 (p < .001), Week 6 (p < .001), and Week 7 (p < .05). Small to moderate treatment effects were found for Week 7 Social Communication (d = .49) and Basic Needs Communication (d = .43). A larger effect was found for pleasure at Week 7 (d = .58). Discussion As expected given the engaging nature of the TimeSlips creative story-telling intervention, analyses revealed increased positive affect during and at 1-week post-intervention. In addition, perhaps associated with the intervention’s reliance on positive social interactions and verbal communication, participants evidenced improved communication skills. However, more frequent dosing and booster sessions of TimeSlips may be needed to show significant differences between treatment and control groups on long-term effects and other outcomes. PMID:21048483

[Scientific role of German ophthalmology in the European telecommunication project OPHTEL].

PubMed

Mertz, M; Mann, G; Zahlmann, G; Obermaier, M

1997-07-01

In Denmark, France, Germany, Great Britain and Italy, the OPHTEL project combines clinical centers of ophthalmology and internal medicine, an institute for medical informatics and health services research, a publishing company and different industrial partners in the EDP market. With the aid of visual telecommunication and rapid data transfer, methods and conditions will be developed and proved so that any physician can very easily obtain sufficient information for treating his patient. Thus, the regional differences in the quality of structured health service (e.g., urban/ rural) will be overcome throughout Europe. SCIENTIFIC TASKS: A multilingual diagnostic and therapeutic thesaurus has to be worked out in order to create standards for communication and quality control. Based on literature, images and image analysis in a knowledge-based data bank, a monitoring system (containing watch-dog functions) and the basic aspects of an ophthalmological patient/disease register will be investigated. (In parallel, a technical development of synchronous and asynchronous telecommunication between eye physicians is taking place in close cooperation with the regional Bavarian project Teleopathalmology in Bavaria on-line). State of the art 6 months after starting the project:the knowledge-based image data bank has been founded and also an ophthalmological 8 language thesaurus and definition standard. All data transfer lines are installed. The project is taking place amid diverging sections of medicine: ophthalmology and internal medicine, health politics and data protection, individual treatment and common interest (health care), product management and office organization. Thus, the scientific quality of the transferred ophthalmological content must undergo sophisticated controls. FUTURE STEPS: Intense cooperation with the big German associations for ophthalmology (DOG, BVA) and the European ophthalmological societies concerning EDP, classification and quality control.

Effects of a creative expression intervention on emotions, communication, and quality of life in persons with dementia.

PubMed

Phillips, Lorraine J; Reid-Arndt, Stephanie A; Pak, Youngju

2010-01-01

Effective nonpharmacological interventions are needed to treat neuropsychiatric symptoms and to improve quality of life for the 5.3 million Americans affected by dementia. The purpose of this study was to test the effect of a storytelling program, TimeSlips, on communication, neuropsychiatric symptoms, and quality of life in long-term care residents with dementia. A quasi-experimental, two-group, repeated measures design was used to compare persons with dementia who were assigned to the twice-weekly, 6-week TimeSlips intervention group (n = 28) or usual care group (n = 28) at baseline and postintervention at Weeks 7 and 10. Outcome measures included the Cornell Scale for Depression in Dementia, the Neuropsychiatric Inventory-Nursing Home Version, the Functional Assessment of Communication Skills, the Quality of Life-Alzheimer's Disease, and the Observed Emotion Rating Scale (this last measure was collected also at Weeks 3 and 6 during TimeSlips for the treatment group and during mealtime for the control group). Compared with the control group, the treatment group exhibited significantly higher pleasure at Week 3 (p < .001), Week 6 (p < .001), and Week 7 (p < .05). Small to moderate treatment effects were found for Week 7 social communication (d = .49) and basic needs communication (d = .43). A larger effect was found for pleasure at Week 7 (d = .58). As expected, given the engaging nature of the TimeSlips creative storytelling intervention, analyses revealed increased positive affect during and at 1 week postintervention. In addition, perhaps associated with the intervention's reliance on positive social interactions and verbal communication, participants evidenced improved communication skills. However, more frequent dosing and booster sessions of TimeSlips may be needed to show significant differences between treatment and control groups on long-term effects and other outcomes.

Long-term environmental monitoring for assessment of change: measurement inconsistencies over time and potential solutions.

PubMed

Ellingsen, Kari E; Yoccoz, Nigel G; Tveraa, Torkild; Hewitt, Judi E; Thrush, Simon F

2017-10-30

The importance of long-term environmental monitoring and research for detecting and understanding changes in ecosystems and human impacts on natural systems is widely acknowledged. Over the last decades, a number of critical components for successful long-term monitoring have been identified. One basic component is quality assurance/quality control protocols to ensure consistency and comparability of data. In Norway, the authorities require environmental monitoring of the impacts of the offshore petroleum industry on the Norwegian continental shelf, and in 1996, a large-scale regional environmental monitoring program was established. As a case study, we used a sub-set of data from this monitoring to explore concepts regarding best practices for long-term environmental monitoring. Specifically, we examined data from physical and chemical sediment samples and benthic macroinvertebrate assemblages from 11 stations from six sampling occasions during the period 1996-2011. Despite the established quality assessment and quality control protocols for this monitoring program, we identified several data challenges, such as missing values and outliers, discrepancies in variable and station names, changes in procedures without calibration, and different taxonomic resolution. Furthermore, we show that the use of different laboratories over time makes it difficult to draw conclusions with regard to some of the observed changes. We offer recommendations to facilitate comparison of data over time. We also present a new procedure to handle different taxonomic resolution, so valuable historical data is not discarded. These topics have a broader relevance and application than for our case study.

Using checklists in a gross anatomy laboratory improves learning outcomes and dissection quality.

PubMed

Hofer, Ryan Engebretson; Nikolaus, O Brant; Pawlina, Wojciech

2011-01-01

Checklists have been widely used in the aviation industry ever since aircraft operations became more complex than any single pilot could reasonably remember. More recently, checklists have found their way into medicine, where cognitive function can be compromised by stress and fatigue. The use of checklists in medical education has rarely been reported, especially in the basic sciences. We explored whether the use of a checklist in the gross anatomy laboratory would improve learning outcomes, dissection quality, and students' satisfaction in the first-year Human Structure didactic block at Mayo Medical School. During the second half of a seven-week anatomy course, dissection teams were each day given a hardcopy checklist of the structures to be identified during that day's dissection. The first half of the course was considered the control, as students did not receive any checklists to utilize during dissection. The measured outcomes were scored on four practice practical examinations and four dissection quality assessments, two each from the first half (control) and second half of the course. A student satisfaction survey was distributed at the end of the course. Examination and dissection scores were analyzed for correlations between practice practical examination score and checklist use. Our data suggest that a daily hardcopy list of anatomical structures for active use in the gross anatomy laboratory increases practice practical examination scores and dissection quality. Students recommend the use of these checklists in future anatomy courses. Copyright © 2011 American Association of Anatomists.

Gaussian content as a laser beam quality parameter.

PubMed

Ruschin, Shlomo; Yaakobi, Elad; Shekel, Eyal

2011-08-01

We propose the Gaussian content (GC) as an optional quality parameter for the characterization of laser beams. It is defined as the overlap integral of a given field with an optimally defined Gaussian. The definition is especially suited for applications where coherence properties are targeted. Mathematical definitions and basic calculation procedures are given along with results for basic beam profiles. The coherent combination of an array of laser beams and the optimal coupling between a diode laser and a single-mode fiber are elaborated as application examples. The measurement of the GC and its conservation upon propagation are experimentally confirmed.

Research on the Teaching Quality of Compulsory Education in China's West Rural Schools

ERIC Educational Resources Information Center

Wang, Jiayi; Li, Ying

2009-01-01

The paper has compared the quality of compulsory education of rural schools in West China with the counties, cities, and provincial capitals, and find out that there is a big gap between the quality of West rural and urban compulsory education, the quality of some grades of the rural primary schools has not achieved the basic requirement of the…

DPSC (Defense Personnel Support Center) Total Quality Management Master Plan

DTIC Science & Technology

1989-07-01

SUBTITLE 5. FUNDING NUMBERS DPSC Total Quality Management Master Plan 6. AUTHOR(S) 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) B. PERFORMING...quality supported solider, sailor, airman and marine. % j cl 1 14. SUBJECT TERMS I 1S. NUMBER OF PAGES TQM (Total Quality Management ), Continuous...THE COMMANDER ON TOTAL QUALITY MANAGEMENT i SECTION I INTRODUCTION 1 II CONCEPTS 6 TQM Basics 7 Continuous Process Improvement 7 DoD TQM Philosophy 9

A model for predicting air quality along highways.

DOT National Transportation Integrated Search

1973-01-01

The subject of this report is an air quality prediction model for highways, AIRPOL Version 2, July 1973. AIRPOL has been developed by modifying the basic Gaussian approach to gaseous dispersion. The resultant model is smooth and continuous throughout...

Time--temperature indicator for perishable products based on kinetically programmable Ag overgrowth on Au nanorods.

PubMed

Zhang, Chao; Yin, An-Xiang; Jiang, Ruibin; Rong, Jie; Dong, Lu; Zhao, Tian; Sun, Ling-Dong; Wang, Jianfang; Chen, Xing; Yan, Chun-Hua

2013-05-28

Food safety is a constant concern for humans. Besides adulteration and contamination, another major threat comes from the spontaneous spoilage of perishable products, which is basically inevitable and highly dependent on the temperature history during the custody chain. For advanced quality control and assessment, time-temperature indicators (TTIs) can be deployed to document the temperature history. However, the use of TTIs is currently limited by either relatively high cost or poor programmability. Here we describe a general, kinetically programmable, and cost-efficient TTI protocol constructed from plasmonic nanocrystals. We present proof-of-principle demonstrations that our TTI can be specifically tailored and thus used to track perishables, dynamically mimic the deteriorative processes therein, and indicate product quality through sharp-contrast multicolor changes. The flexible programmability of our TTI, combined with its substantially low cost and low toxicity, promises a general applicability to each single packaged item of a plethora of perishable products.

New Driving Scheme to Improve Hysteresis Characteristics of Organic Thin Film Transistor-Driven Active-Matrix Organic Light Emitting Diode Display

NASA Astrophysics Data System (ADS)

Yamamoto, Toshihiro; Nakajima, Yoshiki; Takei, Tatsuya; Fujisaki, Yoshihide; Fukagawa, Hirohiko; Suzuki, Mitsunori; Motomura, Genichi; Sato, Hiroto; Tokito, Shizuo; Fujikake, Hideo

2011-02-01

A new driving scheme for an active-matrix organic light emitting diode (AMOLED) display was developed to prevent the picture quality degradation caused by the hysteresis characteristics of organic thin film transistors (OTFTs). In this driving scheme, the gate electrode voltage of a driving-OTFT is directly controlled through the storage capacitor so that the operating point for the driving-OTFT is on the same hysteresis curve for every pixel after signal data are stored in the storage capacitor. Although the number of OTFTs in each pixel for the AMOLED display is restricted because OTFT size should be large enough to drive organic light emitting diodes (OLEDs) due to their small carrier mobility, it can improve the picture quality for an OTFT-driven flexible OLED display with the basic two transistor-one capacitor circuitry.

Application of frequency domain handling qualities criteria to the longitudinal landing task

NASA Technical Reports Server (NTRS)

Sarrafian, S. K.; Powers, B. G.

1985-01-01

Under NASA sponsorship, an in-flight simulation of the longitudinal handling qualities of several configurations for the approach and landing tasks was performed on the USAF/AFWAL Total In-Flight Simulator by the Calspan Corporation. The basic configuration was a generic transport airplane with static instability. The control laws included proportional plus integral gain loops to produce pitch-rate and angle-of-attack feedback loops. The evaluation task was a conventional visual approach to a flared touchdown at a designated spot on the runway with a lateral offset. The general conclusions were that the existing criteria are based on pitch-attitude response and that these characteristics do not adequately discriminate between the good and bad configurations of this study. This paper describes the work that has been done to further develop frequency-based criteria in an effort to provide better correlation with the observed data.

Postharvest treatments of fresh produce

PubMed Central

Mahajan, P. V.; Caleb, O. J.; Singh, Z.; Watkins, C. B.; Geyer, M.

2014-01-01

Postharvest technologies have allowed horticultural industries to meet the global demands of local and large-scale production and intercontinental distribution of fresh produce that have high nutritional and sensory quality. Harvested products are metabolically active, undergoing ripening and senescence processes that must be controlled to prolong postharvest quality. Inadequate management of these processes can result in major losses in nutritional and quality attributes, outbreaks of foodborne pathogens and financial loss for all players along the supply chain, from growers to consumers. Optimal postharvest treatments for fresh produce seek to slow down physiological processes of senescence and maturation, reduce/inhibit development of physiological disorders and minimize the risk of microbial growth and contamination. In addition to basic postharvest technologies of temperature management, an array of others have been developed including various physical (heat, irradiation and edible coatings), chemical (antimicrobials, antioxidants and anti-browning) and gaseous treatments. This article examines the current status on postharvest treatments of fresh produce and emerging technologies, such as plasma and ozone, that can be used to maintain quality, reduce losses and waste of fresh produce. It also highlights further research needed to increase our understanding of the dynamic response of fresh produce to various postharvest treatments. PMID:24797137

Perspectives for Web Service Intermediaries: How Influence on Quality Makes the Difference

NASA Astrophysics Data System (ADS)

Scholten, Ulrich; Fischer, Robin; Zirpins, Christian

In the service-oriented computing paradigm and the Web service architecture, the broker role is a key facilitator to leverage technical capabilities of loose coupling to achieve organizational capabilities of dynamic customer-provider-relationships. In practice, this role has quickly evolved into a variety of intermediary concepts that refine and extend the basic functionality of service brokerage with respect to various forms of added value like platform or market mechanisms. While this has initially led to a rich variety of Web service intermediaries, many of these are now going through a phase of stagnation or even decline in customer acceptance. In this paper we present a comparative study on insufficient service quality that is arguably one of the key reasons for this phenomenon. In search of a differentiation with respect to quality monitoring and management patterns, we categorize intermediaries into Infomediaries, e-Hubs, e-Markets and Integrators. A mapping of quality factors and control mechanisms to these categories depicts their respective strengths and weaknesses. The results show that Integrators have the highest overall performance, followed by e-Markets, e-Hubs and lastly Infomediaries. A comparative market survey confirms the conceptual findings.

Use of qualitative methods to explore the quality-of-life construct from a consumer perspective.

PubMed

Corring, Deborah J; Cook, Joanne V

2007-02-01

This study explored the construct of quality of life from the perspective of adults diagnosed as having severe and persistent mental illness, such as schizophrenia. Qualitative research strategies, specifically in-depth interviews (N=18) and focus groups (N=35), were used to collect data. Interviews and focus groups took place in hospitals, community clinics, community agencies, and clients' homes. A convenience, snowball sampling strategy was utilized. Analysis using the constant comparative method resulted in the identification of two dominant themes. These themes permeated the results, crossed all domains, influenced the linkages between domains, and clearly influenced how individuals frame their expectations regarding quality of life. The first theme was the presence of stigma and its effects on everyday life and future planning, and the second was the pervasive fear of the return of major positive symptoms of psychosis, such as hallucinations, delusions, and general loss of contact with reality. In addition, four quality-of-life domains were identified-the experience of illness, relationships, occupation, and sense of self. Many persons with mental illness simply wish for the basics in life-mental and physical health, supportive relationships, meaningful occupations, and a positive sense of self-believing that acquisition of these basics will lead to a more satisfactory quality of life. Ensuring that they are able to obtain the basics requires action on their part, by those who support them, by service providers that interact with them, and by a more accepting society.

A Reliable Wireless Control System for Tomato Hydroponics

PubMed Central

Ibayashi, Hirofumi; Kaneda, Yukimasa; Imahara, Jungo; Oishi, Naoki; Kuroda, Masahiro; Mineno, Hiroshi

2016-01-01

Agricultural systems using advanced information and communication (ICT) technology can produce high-quality crops in a stable environment while decreasing the need for manual labor. The system collects a wide variety of environmental data and provides the precise cultivation control needed to produce high value-added crops; however, there are the problems of packet transmission errors in wireless sensor networks or system failure due to having the equipment in a hot and humid environment. In this paper, we propose a reliable wireless control system for hydroponic tomato cultivation using the 400 MHz wireless band and the IEEE 802.15.6 standard. The 400 MHz band, which is lower than the 2.4 GHz band, has good obstacle diffraction, and zero-data-loss communication is realized using the guaranteed time-slot method supported by the IEEE 802.15.6 standard. In addition, this system has fault tolerance and a self-healing function to recover from faults such as packet transmission failures due to deterioration of the wireless communication quality. In our basic experiments, the 400 MHz band wireless communication was not affected by the plants’ growth, and the packet error rate was less than that of the 2.4 GHz band. In summary, we achieved a real-time hydroponic liquid supply control with no data loss by applying a 400 MHz band WSN to hydroponic tomato cultivation. PMID:27164105

A Reliable Wireless Control System for Tomato Hydroponics.

PubMed

Ibayashi, Hirofumi; Kaneda, Yukimasa; Imahara, Jungo; Oishi, Naoki; Kuroda, Masahiro; Mineno, Hiroshi

2016-05-05

Agricultural systems using advanced information and communication (ICT) technology can produce high-quality crops in a stable environment while decreasing the need for manual labor. The system collects a wide variety of environmental data and provides the precise cultivation control needed to produce high value-added crops; however, there are the problems of packet transmission errors in wireless sensor networks or system failure due to having the equipment in a hot and humid environment. In this paper, we propose a reliable wireless control system for hydroponic tomato cultivation using the 400 MHz wireless band and the IEEE 802.15.6 standard. The 400 MHz band, which is lower than the 2.4 GHz band, has good obstacle diffraction, and zero-data-loss communication is realized using the guaranteed time-slot method supported by the IEEE 802.15.6 standard. In addition, this system has fault tolerance and a self-healing function to recover from faults such as packet transmission failures due to deterioration of the wireless communication quality. In our basic experiments, the 400 MHz band wireless communication was not affected by the plants' growth, and the packet error rate was less than that of the 2.4 GHz band. In summary, we achieved a real-time hydroponic liquid supply control with no data loss by applying a 400 MHz band WSN to hydroponic tomato cultivation.

A whole process quality control system for energy measuring instruments inspection based on IOT technology

NASA Astrophysics Data System (ADS)

Yin, Bo; Liu, Li; Wang, Jiahan; Li, Xiran; Liu, Zhenbo; Li, Dewei; Wang, Jun; Liu, Lu; Wu, Jun; Xu, Tingting; Cui, He

2017-10-01

Electric energy measurement as a basic work, an accurate measurements play a vital role for the economic interests of both parties of power supply, the standardized management of the measurement laboratory at all levels is a direct factor that directly affects the fairness of measurement. Currently, the management of metering laboratories generally uses one-dimensional bar code as the recognition object, advances the testing process by manual management, most of the test data requires human input to generate reports. There are many problems and potential risks in this process: Data cannot be saved completely, cannot trace the status of inspection, the inspection process isn't completely controllable and so on. For the provincial metrology center's actual requirements of the whole process management for the performance test of the power measuring appliances, using of large-capacity RF tags as a process management information media, we developed a set of general measurement experiment management system, formulated a standardized full performance test process, improved the raw data recording mode of experimental process, developed a storehouse automatic inventory device, established a strict test sample transfer and storage system, ensured that all the raw data of the inspection can be traced back, achieved full life-cycle control of the sample, significantly improved the quality control level and the effectiveness of inspection work.

Basic truths for planning and executing an inventory

Treesearch

2000-01-01

A number of basic truths are presented. The importance of carefully developing the objectives for an inventory is stressed. The use of permanent plots and temporary plots is covered. The necessity of obtaining a representative sample, training effectively, and collecting quality data is discussed. The future direction for forest inventories is suggested.

Development and Validation of a Survey Instrument for Detecting Basic Motor Competencies in Elementary School Children

ERIC Educational Resources Information Center

Scheuer, Claude; Bund, Andreas; Becker, Werner; Herrmann, Christian

2017-01-01

Basic motor competencies (in German: Motorische Basiskompetenzen; MOBAK) are motor performance dispositions formulated as minimum standards that empower children to participate in the culture of human movement. In opposition to movement-specific and process-oriented fundamental movement skills assessing the quality of movement execution, basic…

Holistic Approach as Viewed by the Basic School Teachers in Latvia

ERIC Educational Resources Information Center

Badjanova, Jelena; Iliško, Dzintra

2015-01-01

The article points to new competencies required from basic school teachers, reinforced by the reform processes in the educational system in Latvia, the quality assurance of educational process, and modernisation and critical re-evaluation of educational materials and standards. The authors view sustainability as an integral part of reform…

42 CFR 417.106 - Quality assurance program; Availability, accessibility, and continuity of basic and supplemental...

Code of Federal Regulations, 2012 CFR

2012-10-01

... emergency care service, if the number of providers of that basic health service who will provide the service... includes general practice, family practice, general internal medicine, general pediatrics, and general... after-hours services. (Medically necessary emergency services must be available 24 hours a day, 7 days a...

42 CFR 417.106 - Quality assurance program; Availability, accessibility, and continuity of basic and supplemental...

Code of Federal Regulations, 2014 CFR

2014-10-01

... emergency care service, if the number of providers of that basic health service who will provide the service... includes general practice, family practice, general internal medicine, general pediatrics, and general... after-hours services. (Medically necessary emergency services must be available 24 hours a day, 7 days a...

42 CFR 417.106 - Quality assurance program; Availability, accessibility, and continuity of basic and supplemental...

Code of Federal Regulations, 2013 CFR

2013-10-01

... emergency care service, if the number of providers of that basic health service who will provide the service... includes general practice, family practice, general internal medicine, general pediatrics, and general... after-hours services. (Medically necessary emergency services must be available 24 hours a day, 7 days a...

[Fundamentals of quality control systems in medical-biochemical laboratories--the role of marketing].

PubMed

Topić, E; Turek, S

2000-01-01

The basic criterion for the overall quality system in medical biochemistry laboratories concerning equipment, premises and laboratory staff in primary health care (PHC) (Regulations on quality systems and good laboratory practice of the Croatian Medical Biochemists Chamber, 1995, Regulations on categorization of medical biochemistry laboratories of the Croatian Medical Biochemists Chamber, 1996, EC4: Essential criteria for quality systems in medical laboratories. Eur J Clin Chem Clin Biochem 1997 in medical biochemical laboratories included in the First Croatia health project, Primary health care subproject, has been met by the marketing approach to the project. The equipment ensuring implementation of the complete laboratory program (NN/96), more accurate and precise analytical procedures, and higher reliability of laboratory test results compared with previous equipment, has been purchased by an international tender. Uniform technology and methods of analysis have ensured high standards of good laboratory services, yielding test results than can be transferred from primary to secondary health care level. The new equipment has improved organization between central and detached medical biochemistry laboratory units, while the high quality requirement has led to improvement in the staff structure, e.g., medical biochemists have been employed in laboratories that had previously worked without such a professional. Equipment renewal has been accompanied by proper education for all levels of PHC professionals.

WE-A-304-01: Strategies and Technologies for Cranial Radiosurgery Planning: MLC-Based Linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, G.

2015-06-15

The high fractional doses, stringent requirements for accuracy and precision, and surgical perspective characteristic of intracranial radiosurgery create considerations for treatment planning which are distinct from most other radiotherapy procedures. This session will introduce treatment planning techniques specific to two popular intracranial SRS modalities: Gamma Knife and MLC-based Linac. The basic treatment delivery characteristics of each device will be reviewed with a focus on how those characteristics determine the paradigm used for treatment planning. Basic techniques for treatment planning will be discussed, including considerations such as isodose selection, target and organ-at-risk definition, quality indices, and protection of critical structures. Futuremore » directions for SRS treatment planning will also be discussed. Learning Objectives: Introduce the basic physical principles of intracranial radiosurgery and how they are realized in the treatment planning paradigms for Gamma Knife and Linac radiosurgery. Demonstrate basic treatment planning techniques. Discuss metrics for evaluating SRS treatment plan quality. Discuss recent and future advances in SRS treatment planning. D. Schlesinger receives research support from Elekta, AB.« less

WE-A-304-02: Strategies and Technologies for Cranial Radiosurgery Planning: Gamma Knife

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schlesinger, D.

2015-06-15

The high fractional doses, stringent requirements for accuracy and precision, and surgical perspective characteristic of intracranial radiosurgery create considerations for treatment planning which are distinct from most other radiotherapy procedures. This session will introduce treatment planning techniques specific to two popular intracranial SRS modalities: Gamma Knife and MLC-based Linac. The basic treatment delivery characteristics of each device will be reviewed with a focus on how those characteristics determine the paradigm used for treatment planning. Basic techniques for treatment planning will be discussed, including considerations such as isodose selection, target and organ-at-risk definition, quality indices, and protection of critical structures. Futuremore » directions for SRS treatment planning will also be discussed. Learning Objectives: Introduce the basic physical principles of intracranial radiosurgery and how they are realized in the treatment planning paradigms for Gamma Knife and Linac radiosurgery. Demonstrate basic treatment planning techniques. Discuss metrics for evaluating SRS treatment plan quality. Discuss recent and future advances in SRS treatment planning. D. Schlesinger receives research support from Elekta, AB.« less

Does management really work?

PubMed

Bloom, Nicholas; Sadun, Raffaella; Van Reenen, John

2012-11-01

HBR's 90th anniversary is a sensible time to revisit a basic question: Are organizations more likely to succeed if they adopt good management practices? The answer may seem obvious to most HBR readers, but these three economists cast their net much wider than that. In a decadelong study of thousands of organizations in 20 countries, they and their interview teams assessed how well manufacturers, schools, and hospitals adhere to three management basics: targets, incentives, and monitoring. They found that huge numbers of companies follow none of those fundamentals, that adopting the basics yields big improvements in outcomes such as productivity and longevity, and that good nuts-and-bolts management at individual firms shapes national performance. At 14 textile manufacturers in India, for example, an intervention--involving free, high-quality advice from a consultant who was on-site half-time for five months--cut defects by half, reduced inventory by 20%, and raised output by 10%. A control group saw no such gains. The authors' global data set suggests that implementing good management at schools and hospitals yields change more slowly than at manufacturers--but it does come eventually. And the macroeconomic potential--for incomes, productivity, and delivery of critically needed services--is huge. A call for "better management" may sound prosaic, but given the global payoffs, it's actually quite radical.

Prediction of the Vickers Microhardness and Ultimate Tensile Strength of AA5754 H111 Friction Stir Welding Butt Joints Using Artificial Neural Network

PubMed Central

De Filippis, Luigi Alberto Ciro; Serio, Livia Maria; Facchini, Francesco; Mummolo, Giovanni; Ludovico, Antonio Domenico

2016-01-01

A simulation model was developed for the monitoring, controlling and optimization of the Friction Stir Welding (FSW) process. This approach, using the FSW technique, allows identifying the correlation between the process parameters (input variable) and the mechanical properties (output responses) of the welded AA5754 H111 aluminum plates. The optimization of technological parameters is a basic requirement for increasing the seam quality, since it promotes a stable and defect-free process. Both the tool rotation and the travel speed, the position of the samples extracted from the weld bead and the thermal data, detected with thermographic techniques for on-line control of the joints, were varied to build the experimental plans. The quality of joints was evaluated through destructive and non-destructive tests (visual tests, macro graphic analysis, tensile tests, indentation Vickers hardness tests and t thermographic controls). The simulation model was based on the adoption of the Artificial Neural Networks (ANNs) characterized by back-propagation learning algorithm with different types of architecture, which were able to predict with good reliability the FSW process parameters for the welding of the AA5754 H111 aluminum plates in Butt-Joint configuration. PMID:28774035

Operations management tools to be applied for textile

NASA Astrophysics Data System (ADS)

Maralcan, A.; Ilhan, I.

2017-10-01

In this paper, basic concepts of process analysis such as flow time, inventory, bottleneck, labour cost and utilization are illustrated first. The effect of bottleneck on the results of a business are especially emphasized. In the next section, tools on productivity measurement; KPI (Key Performance Indicators) Tree, OEE (Overall Equipment Effectiveness) and Takt Time are introduced and exemplified. KPI tree is a diagram on which we can visualize all the variables of an operation which are driving financial results through cost and profit. OEE is a tool to measure a potential extra capacity of an equipment or an employee. Takt time is a tool to determine the process flow rate according to the customer demand. KPI tree is studied through the whole process while OEE is exemplified for a stenter frame machine which is the most important machine (and usually the bottleneck) and the most expensive investment in a finishing plant. Takt time is exemplified for the quality control department. Finally quality tools, six sigma, control charts and jidoka are introduced. Six sigma is a tool to measure process capability and by the way probability of a defect. Control chart is a powerful tool to monitor the process. The idea of jidoka (detect, stop and alert) is about alerting the people that there is a problem in the process.

Development of a Rotary Wing Unmanned Aerial Vehicle (UAV) Simulation Model

DTIC Science & Technology

2014-03-01

Features Language URL Autopilot: DIY UAV - 2 DOF proportional controller - Kalman filtering C http://autopilot.sour ceforge.net Paperazzi - 3 DOF...proprtional controller - Basic navigation OCaml http://paparazzi.ena c.fr JSBSim - Basic control system blockset - Sample autopilot

Development of a Hybrid Course on Wheelchair Service Provision for clinicians in international contexts.

PubMed

Burrola-Mendez, Yohali; Goldberg, Mary; Gartz, Rachel; Pearlman, Jon

2018-01-01

Wheelchair users worldwide are at high risk of developing secondary health conditions and premature death due to inappropriate wheelchair provision by untrained providers. The International Society of Wheelchair Professionals (ISWP) has developed a Hybrid Course based on the World Health Organization's Wheelchair Service Training Package-Basic Level. The Hybrid Course leverages online modules designed for low-bandwidth internet access that reduces the in-person training exposure from five to three and a half days, making it less expensive and more convenient for both trainees and trainers. The Hybrid Course was designed using a systematic approach guided by an international group of stakeholders. The development followed the Quality Matters Higher Educational Rubric, web design guidelines for low bandwidth, experts' opinions, and the best practices for blended course design. A quasi-experimental approach was used to evaluate the effectiveness of the Hybrid Course taken by six graduate students in Rehabilitation Sciences at the University of Pittsburgh by measuring pre- and post knowledge using the validated ISWP Wheelchair Service Provision-Basic Test. The outcome measure was assessed using a paired sample t-test between pretest and posttest scores. The quality of the Hybrid Course was evaluated by three external reviewers using the Quality Matters Higher Educational Rubric who were blind to each others' evaluation and the results of the training intervention. Hybrid Course participants reported significant increases in scores on the ISWP Wheelchair Service Provision-Basic Test after participating in the training, with an average increase of 10.84±5.42, p = 0.004, Cohen's d = 1.99. In addition, the Hybrid Course met the Quality Matters Standards in two out of three evaluations and reported a percentage of agreement between evaluators of 84%. The Hybrid Course met quality standards and proved to be effective in increasing basic level wheelchair knowledge in a group of Rehabilitation Science graduate students.

Soil quality: Some basic considerations and case studies

Treesearch

Dale W. Johnson

2010-01-01

Some fundamental properties of soils that pertain to the concept of soil quality are discussed including a discussion of what can and cannot be changed with management.Case studies showing the effects of N-fixing vegetation and N-enrichment effects on invasive species are provided to illustrate the complications that may arise from applying one soil quality standard to...

Application of Total Quality Management in Education

ERIC Educational Resources Information Center

Farooq, M. S.; Akhtar, M. S.; Ullah, S. Zia; Memon, R. A.

2007-01-01

The purpose of the paper is to analyzing thoughts of the modern management paradigm "Total Quality Management" (TQM), and its application in the field of education. The basic theme of TQM is participatory approach to address the question(s) of quality in business aswell as in the field of education. Reviewing fresh literature from the internet …

Differentiation among Schools as a Factor of the Quality of General Education

ERIC Educational Resources Information Center

Kozochkina, T. L.

2009-01-01

Russian schools differ widely in the quality of education they provide and in the socioeconomic status of the students they teach. More needs to be done to provide quality education for children from all social strata, including provision of remedial or extra tutoring where necessary. General school education provides the basic body of knowledge…

The IEO Data Center Management System: Tools for quality control, analysis and access marine data

NASA Astrophysics Data System (ADS)

Casas, Antonia; Garcia, Maria Jesus; Nikouline, Andrei

2010-05-01

Since 1994 the Data Centre of the Spanish Oceanographic Institute develops system for archiving and quality control of oceanographic data. The work started in the frame of the European Marine Science & Technology Programme (MAST) when a consortium of several Mediterranean Data Centres began to work on the MEDATLAS project. Along the years, old software modules for MS DOS were rewritten, improved and migrated to Windows environment. Oceanographic data quality control includes now not only vertical profiles (mainly CTD and bottles observations) but also time series of currents and sea level observations. New powerful routines for analysis and for graphic visualization were added. Data presented originally in ASCII format were organized recently in an open source MySQL database. Nowadays, the IEO, as part of SeaDataNet Infrastructure, has designed and developed a new information system, consistent with the ISO 19115 and SeaDataNet standards, in order to manage the large and diverse marine data and information originated in Spain by different sources, and to interoperate with SeaDataNet. The system works with data stored in ASCII files (MEDATLAS, ODV) as well as data stored within the relational database. The components of the system are: 1.MEDATLAS Format and Quality Control - QCDAMAR: Quality Control of Marine Data. Main set of tools for working with data presented as text files. Includes extended quality control (searching for duplicated cruises and profiles, checking date, position, ship velocity, constant profiles, spikes, density inversion, sounding, acceptable data, impossible regional values,...) and input/output filters. - QCMareas: A set of procedures for the quality control of tide gauge data according to standard international Sea Level Observing System. These procedures include checking for unexpected anomalies in the time series, interpolation, filtering, computation of basic statistics and residuals. 2. DAMAR: A relational data base (MySql) designed to manage the wide variety of marine information as common vocabularies, Catalogues (CSR & EDIOS), Data and Metadata. 3.Other tools for analysis and data management - Import_DB: Script to import data and metadata from the Medatlas ASCII files into the database. - SelDamar/Selavi: interface with the database for local and web access. Allows selective retrievals applying the criteria introduced by the user, as geographical bounds, data responsible, cruises, platform, time periods, etc. Includes also statistical reference values calculation, plotting of original and mean profiles together with vertical interpolation. - ExtractDAMAR: Script to extract data when they are archived in ASCII files that meet the criteria upon an user request through SelDamar interface and export them in ODV format, making also a unit conversion.

An effectiveness analysis of healthcare systems using a systems theoretic approach.

PubMed

Chuang, Sheuwen; Inder, Kerry

2009-10-24

The use of accreditation and quality measurement and reporting to improve healthcare quality and patient safety has been widespread across many countries. A review of the literature reveals no association between the accreditation system and the quality measurement and reporting systems, even when hospital compliance with these systems is satisfactory. Improvement of health care outcomes needs to be based on an appreciation of the whole system that contributes to those outcomes. The research literature currently lacks an appropriate analysis and is fragmented among activities. This paper aims to propose an integrated research model of these two systems and to demonstrate the usefulness of the resulting model for strategic research planning. To achieve these aims, a systematic integration of the healthcare accreditation and quality measurement/reporting systems is structured hierarchically. A holistic systems relationship model of the administration segment is developed to act as an investigation framework. A literature-based empirical study is used to validate the proposed relationships derived from the model. Australian experiences are used as evidence for the system effectiveness analysis and design base for an adaptive-control study proposal to show the usefulness of the system model for guiding strategic research. Three basic relationships were revealed and validated from the research literature. The systemic weaknesses of the accreditation system and quality measurement/reporting system from a system flow perspective were examined. The approach provides a system thinking structure to assist the design of quality improvement strategies. The proposed model discovers a fourth implicit relationship, a feedback between quality performance reporting components and choice of accreditation components that is likely to play an important role in health care outcomes. An example involving accreditation surveyors is developed that provides a systematic search for improving the impact of accreditation on quality of care and hence on the accreditation/performance correlation. There is clear value in developing a theoretical systems approach to achieving quality in health care. The introduction of the systematic surveyor-based search for improvements creates an adaptive-control system to optimize health care quality. It is hoped that these outcomes will stimulate further research in the development of strategic planning using systems theoretic approach for the improvement of quality in health care.

Looking into the factors affecting renal patients' quality of life.

PubMed

Theodora, K; Christina, D; Tania, F; Anna, P; Georgios, V

1996-01-01

Quality of life, according to Horquist is "the extent to which one's needs are satisfied, in the context of physical, psychological, social and environmental conditions" (I). Self-esteem is the basic element of a good quality of life. Health-related quality of life consists of a number of components; including family relationships, friendships, finances, physical and psychological status, adjustment to therapy and feeling of security during the treatment.

Diagnostic performances of the fluorescent spot test for G6PD deficiency in newborns along the Thailand-Myanmar border: A cohort study.

PubMed

Thielemans, Laurence; Gornsawun, Gornpan; Hanboonkunupakarn, Borimas; Paw, Moo Kho; Porn, Pen; Moo, Paw Khu; Van Overmeire, Bart; Proux, Stephane; Nosten, François; McGready, Rose; Carrara, Verena I; Bancone, Germana

2018-01-01

Background: Glucose-6-phosphate dehydrogenase (G6PD) deficiency is an inherited enzymatic disorder associated with severe neonatal hyperbilirubinemia and acute haemolysis after exposure to certain drugs or infections. The disorder can be diagnosed phenotypically with a fluorescent spot test (FST), which is a simple test that requires training and basic laboratory equipment. This study aimed to assess the diagnostic performances of the FST used on umbilical cord blood by locally-trained staff and to compare test results of the neonates at birth with the results after one month of age. Methods : We conducted a cohort study on newborns at the Shoklo Malaria Research Unit, along the Thai-Myanmar border between January 2015 and May 2016. The FST was performed at birth on the umbilical cord blood by locally-trained staff and quality controlled by specialised technicians at the central laboratory. The FST was repeated after one month of age. Genotyping for common local G6PD mutations was carried out for all discrepant results. Results: FST was performed on 1521 umbilical cord blood samples. Quality control and genotyping revealed 10 misdiagnoses. After quality control, 10.7% of the males (84/786) and 1.2% of the females (9/735) were phenotypically G6PD deficient at birth. The FST repeated at one month of age or later diagnosed 8 additional G6PD deficient infants who were phenotypically normal at birth. Conclusions : This study shows the short-comings of the G6PD FST in neonatal routine screening and highlights the importance of training and quality control. A more conservative interpretation of the FST in male newborns could increase the diagnostic performances. Quantitative point-of-care tests might show higher sensitivity and specificity for diagnosis of G6PD deficiency on umbilical cord blood and should be investigated.

Diagnostic performances of the fluorescent spot test for G6PD deficiency in newborns along the Thailand-Myanmar border: A cohort study

PubMed Central

Thielemans, Laurence; Gornsawun, Gornpan; Hanboonkunupakarn, Borimas; Paw, Moo Kho; Porn, Pen; Moo, Paw Khu; Van Overmeire, Bart; Proux, Stephane; Nosten, François; McGready, Rose; Carrara, Verena I.; Bancone, Germana

2018-01-01

Background: Glucose-6-phosphate dehydrogenase (G6PD) deficiency is an inherited enzymatic disorder associated with severe neonatal hyperbilirubinemia and acute haemolysis after exposure to certain drugs or infections. The disorder can be diagnosed phenotypically with a fluorescent spot test (FST), which is a simple test that requires training and basic laboratory equipment. This study aimed to assess the diagnostic performances of the FST used on umbilical cord blood by locally-trained staff and to compare test results of the neonates at birth with the results after one month of age. Methods: We conducted a cohort study on newborns at the Shoklo Malaria Research Unit, along the Thai-Myanmar border between January 2015 and May 2016. The FST was performed at birth on the umbilical cord blood by locally-trained staff and quality controlled by specialised technicians at the central laboratory. The FST was repeated after one month of age. Genotyping for common local G6PD mutations was carried out for all discrepant results. Results: FST was performed on 1521 umbilical cord blood samples. Quality control and genotyping revealed 10 misdiagnoses. After quality control, 10.7% of the males (84/786) and 1.2% of the females (9/735) were phenotypically G6PD deficient at birth. The FST repeated at one month of age or later diagnosed 8 additional G6PD deficient infants who were phenotypically normal at birth. Conclusions: This study shows the short-comings of the G6PD FST in neonatal routine screening and highlights the importance of training and quality control. A more conservative interpretation of the FST in male newborns could increase the diagnostic performances. Quantitative point-of-care tests might show higher sensitivity and specificity for diagnosis of G6PD deficiency on umbilical cord blood and should be investigated. PMID:29552643

Cost-effectiveness of preventive case management for parents with a mental illness: a randomized controlled trial from three economic perspectives.

PubMed

Wansink, Henny J; Drost, Ruben M W A; Paulus, Aggie T G; Ruwaard, Dirk; Hosman, Clemens M H; Janssens, Jan M A M; Evers, Silvia M A A

2016-07-07

The children of parents with a mental illness (COPMI) are at increased risk for developing costly psychiatric disorders because of multiple risk factors which threaten parenting quality and thereby child development. Preventive basic care management (PBCM) is an intervention aimed at reducing risk factors and addressing the needs of COPMI-families in different domains. The intervention may lead to financial consequences in the healthcare sector and in other sectors, also known as inter-sectoral costs and benefits (ICBs). The objective of this study was to assess the cost-effectiveness of PBCM from three perspectives: a narrow healthcare perspective, a social care perspective (including childcare costs) and a broad societal perspective (including all ICBs). Effects on parenting quality (as measured by the HOME) and costs during an 18-month period were studied in in a randomized controlled trial. Families received PBCM (n = 49) or care as usual (CAU) (n = 50). For all three perspectives, incremental cost-effectiveness ratios (ICERs) were calculated. Stochastic uncertainty in the data was dealt with using non-parametric bootstraps. Sensitivity analyses included calculating ICERs excluding cost outliers, and making an adjustment for baseline cost differences. Parenting quality improved in the PBCM group and declined in the CAU group, and PBCM was shown to be more costly than CAU. ICERs differ from 461 Euros (healthcare perspective) to 215 Euros (social care perspective) to 175 Euros (societal perspective) per one point improvement on the HOME T-score. The results of the sensitivity analyses, based on complete cases and excluding cost outliers, support the finding that the ICER is lower when adopting a broader perspective. The subgroup analysis and the analysis with baseline adjustments resulted in higher ICERs. This study is the first economic evaluation of family-focused preventive basic care management for COPMI in psychiatric and family services. The effects of the chosen perspective on determining the cost-effectiveness of PBCM underscore the importance of economic studies of interdepartmental policies. Future studies focusing on the cost-effectiveness of programs like PBCM in other sites and studies with more power are encouraged as this may improve the quality of information used in supporting decision making. NTR2569 , date of registration 2010-10-12.

Orbiter Flying Qualities (OFQ) Workstation user's guide

NASA Technical Reports Server (NTRS)

Myers, Thomas T.; Parseghian, Zareh; Hogue, Jeffrey R.

1988-01-01

This project was devoted to the development of a software package, called the Orbiter Flying Qualities (OFQ) Workstation, for working with the OFQ Archives which are specially selected sets of space shuttle entry flight data relevant to flight control and flying qualities. The basic approach to creation of the workstation software was to federate and extend commercial software products to create a low cost package that operates on personal computers. Provision was made to link the workstation to large computers, but the OFQ Archive files were also converted to personal computer diskettes and can be stored on workstation hard disk drives. The primary element of the workstation developed in the project is the Interactive Data Handler (IDH) which allows the user to select data subsets from the archives and pass them to specialized analysis programs. The IDH was developed as an application in a relational database management system product. The specialized analysis programs linked to the workstation include a spreadsheet program, FREDA for spectral analysis, MFP for frequency domain system identification, and NIPIP for pilot-vehicle system parameter identification. The workstation also includes capability for ensemble analysis over groups of missions.

Effect of single- and two-cycle high hydrostatic pressure treatments on water properties, physicochemical and microbial qualities of minimally processed squids (todarodes pacificus).

PubMed

Zhang, Yifeng; Jiao, Shunshan; Lian, Zixuan; Deng, Yun; Zhao, Yanyun

2015-05-01

This study investigated the effect of single- and two-cycle high hydrostatic pressure (HHP) treatments on water properties, physicochemical, and microbial qualities of squids (Todarodes pacificus) during 4 °C storage for up to 10 d. Single-cycle treatments were applied at 200, 400, or 600 MPa for 20 min (S-200, S-400, and S-600), and two-cycle treatments consisted of two 10 min cycles at 200, 400, or 600 MPa, respectively (T-200, T-400, and T-600). HHP-treated samples had higher (P < 0.05) content of P2b (immobilized water) and P21 (myofibril water), but lower P22 (free water) than those of control. The single- and two-cycle HHP treatments at the same pressure level caused no significant difference in water state of squids. The two-cycle HHP treatment was more effective in controlling total volatile basic nitrogen, pH, and total plate counts (TPC) of squids during storage, in which TPC of S-600 and T-600 was 2.9 and 1.8 log CFU/g at 10 d, respectively, compared with 7.5 log CFU/g in control. HHP treatments delayed browning discoloration of the squids during storage, and the higher pressure level and two-cycle HHP were more effective. Water properties highly corresponded with color and texture indices of squids. This study demonstrated that the two-cycle HHP treatment was more effective in controlling microbial growth and quality deterioration while having similar impact on the physicochemical and water properties of squids in comparison with the single-cycle treatment, thus more desirable for extending shelf-life of fresh squids. © 2015 Institute of Food Technologists®

The efficacy of virtual reality simulation training in laparoscopy: a systematic review of randomized trials.

PubMed

Larsen, Christian Rifbjerg; Oestergaard, Jeanett; Ottesen, Bent S; Soerensen, Jette Led

2012-09-01

Virtual reality (VR) simulators for surgical training might possess the properties needed for basic training in laparoscopy. Evidence for training efficacy of VR has been investigated by research of varying quality over the past decade. To review randomized controlled trials regarding VR training efficacy compared with traditional or no training, with outcome measured as surgical performance in humans or animals. In June 2011 Medline, Embase, the Cochrane Central Register of Controlled Trials, Web of Science and Google Scholar were searched using the following medical subject headings (MeSh) terms: Laparoscopy/standards, Computing methodologies, Programmed instruction, Surgical procedures, Operative, and the following free text terms: Virtual real* OR simulat* AND Laparoscop* OR train* Controlled trials. All randomized controlled trials investigating the effect of VR training in laparoscopy, with outcome measured as surgical performance. A total of 98 studies were screened, 26 selected and 12 included, with a total of 241 participants. Operation time was reduced by 17-50% by VR training, depending on simulator type and training principles. Proficiency-based training appeared superior to training based on fixed time or fixed numbers of repetition. Simulators offering training for complete operative procedures came out as more efficient than simulators offering only basic skills training. Skills in laparoscopic surgery can be increased by proficiency-based procedural VR simulator training. There is substantial evidence (grade IA - IIB) to support the use of VR simulators in laparoscopic training. © 2012 The Authors  Acta Obstetricia et Gynecologica Scandinavica© 2012 Nordic Federation of Societies of Obstetrics and Gynecology.

Effects of advanced life support versus basic life support on the mortality rates of patients with trauma in prehospital settings: a study protocol for a systematic review and meta-analysis

PubMed Central

Kondo, Yutaka; Fukuda, Tatsuma; Uchimido, Ryo; Hifumi, Toru; Hayashida, Kei

2017-01-01

Introduction Advanced life support (ALS) is thought to be associated with improved survival in prehospital trauma care when compared with basic life support (BLS). However, evidence on the benefits of prehospital ALS for patients with trauma is controversial. Therefore, we aim to clarify if ALS improves mortality in patients with trauma when compared with BLS by conducting a systematic review and meta-analysis of the recent literature. Methods and analysis We will perform searches in PubMed, Embase and the Cochrane Central Register of Controlled Trials for published observational studies, controlled before-and-after studies, randomised controlled trials and other controlled trials conducted in humans and published until March 2017. We will screen search results, assess study selection, extract data and assess the risk of bias in duplicate; disagreements will be resolved through discussions. Data from clinically homogeneous studies will be pooled using a random-effects meta-analysis, heterogeneity of effects will be assessed using the χ2 test of homogeneity, and any observed heterogeneity will be quantified using the I2 statistic. Last, the Grading of Recommendations Assessment, Development and Evaluation approach will be used to rate the quality of the evidence. Ethics and dissemination Our study does not require ethical approval as it is based on findings of previously published articles. Results will be disseminated through publication in a peer-reviewed journal, presentations at relevant conferences and publications for patient information. Trial registration number PROSPERO (International Prospective Register of Systematic Reviews) registration number CRD42017054389. PMID:29061611

Software Reviews Since Acquisition Reform - The Artifact Perspective

DTIC Science & Technology

2004-01-01

Risk Management OLD NEW Slide 13Acquisition of Software Intensive Systems 2004 – Peter Hantos Single, basic software paradigm Single processor Low...software risk mitigation related trade-offs must be done together Integral Software Engineering Activities Process Maturity and Quality Frameworks Quality

Determination of Tasks Required by Graduates of Manufacturing Engineering Technology Programs.

ERIC Educational Resources Information Center

Zirbel, Jay H.

1993-01-01

A Delphi panel of 14 experts identified 37 tasks performed by/qualities needed by manufacturing engineering technologists. Most important were work ethic, performance quality, communication skills, teamwork, computer applications, manufacturing basics, materials knowledge, troubleshooting, supervision, and global issues. (SK)

Overview of Emerging Air Quality Monitoring Technologies and Their Data

EPA Science Inventory

This is a webinar presentation as part of a series on Air Quality Planning for Wildland Smoke. The purpose of the talk is to provide a basic overview of monitoring technologies and specifically focus on emerging technologies for PM2.5.

A 12-week commercial web-based weight-loss program for overweight and obese adults: randomized controlled trial comparing basic versus enhanced features.

PubMed

Collins, Clare E; Morgan, Philip J; Jones, Penelope; Fletcher, Kate; Martin, Julia; Aguiar, Elroy J; Lucas, Ashlee; Neve, Melinda J; Callister, Robin

2012-04-25

The development and use of Web-based programs for weight loss is increasing rapidly, yet they have rarely been evaluated using randomized controlled trials (RCTs). Interestingly, most people who attempt weight loss use commercially available programs, yet it is very uncommon for commercial programs to be evaluated independently or rigorously. To compare the efficacy of a standard commercial Web-based weight-loss program (basic) versus an enhanced version of this Web program that provided additional personalized e-feedback and contact from the provider (enhanced) versus a wait-list control group (control) on weight outcomes in overweight and obese adults. This purely Web-based trial using a closed online user group was an assessor-blinded RCT with participants randomly allocated to the basic or enhanced 12-week Web-based program, based on social cognitive theory, or the control, with body mass index (BMI) as the primary outcome. We enrolled 309 adults (129/309, 41.8% male, BMI mean 32.3, SD 4 kg/m(2)) with 84.1% (260/309) retention at 12 weeks. Intention-to-treat analysis showed that both intervention groups reduced their BMI compared with the controls (basic: -0.72, SD 1.1 kg/m(2), enhanced: -1.0, SD 1.4, control: 0.15, SD 0.82; P < .001) and lost significant weight (basic: -2.1, SD 3.3 kg, enhanced: -3.0, SD 4.1, control: 0.4, SD 2.3; P < .001) with changes in waist circumference (basic: -2.0, SD 3.5 cm, enhanced: -3.2, SD 4.7, control: 0.5, SD 3.0; P < .001) and waist-to-height ratio (basic: -0.01, SD 0.02, enhanced: -0.02, SD 0.03, control: 0.0, SD 0.02; P < .001), but no differences were observed between the basic and enhanced groups. The addition of personalized e-feedback and contact provided limited additional benefits compared with the basic program. A commercial Web-based weight-loss program can be efficacious across a range of weight-related outcomes and lifestyle behaviors and achieve clinically important weight loss. Although the provision of additional personalized feedback did not facilitate greater weight loss after 12 weeks, the impact of superior participant retention on longer-term outcomes requires further study. Further research is required to determine the optimal mix of program features that lead to the biggest treatment impact over time. Australian New Zealand Clinical Trials Registry (ANZCTR): 12610000197033.

Quality of life from the perspective of the palliative care patient in a resource-poor community in South Africa.

PubMed

Jansen van Rensburg, Jacoba J M; Maree, Johanna E; van Belkum, Corrien

2013-02-01

Quality of life is an ill-defined term, as it means different things to different people. Quality of life has been well researched, especially with respect to people with cancer, but not necessarily from the perspective of the patient, and also, not in Third World, resource-poor countries. The objective of this study was to explore quality of life from the perspective of palliative care patients managed at a palliative care clinic serving a resource-poor community in Tshwane, South Africa. An exploratory, qualitative phenomenological study was conducted. The target population for this study was all patients managed at a palliative care clinic serving a resource-poor community in Tshwane. Self-report data were gathered by means of in-depth interviews. The data were analyzed using a template analysis style as well as content analysis using open coding. Data analysis was done concurrently with data gathering. Data saturation was reached after 10 interviews (n = 10). Three themes arose from the data: factors that had a positive influence on quality of life, factors that had a negative influence on quality of life, and experience of quality of life. Work played the most important role in quality of life whereas only one participant linked symptom control with quality of life. Experiencing symptoms, rejection, and stigmatization had a negative influence on quality of life. Friends and religion played a significant role and added to quality of life. Life was a daily struggle for survival. Poverty was so overwhelming that quality of life was primarily measured in terms of the ability to buy food and other basic commodities.

Unified control/structure design and modeling research

NASA Technical Reports Server (NTRS)

Mingori, D. L.; Gibson, J. S.; Blelloch, P. A.; Adamian, A.

1986-01-01

To demonstrate the applicability of the control theory for distributed systems to large flexible space structures, research was focused on a model of a space antenna which consists of a rigid hub, flexible ribs, and a mesh reflecting surface. The space antenna model used is discussed along with the finite element approximation of the distributed model. The basic control problem is to design an optimal or near-optimal compensator to suppress the linear vibrations and rigid-body displacements of the structure. The application of an infinite dimensional Linear Quadratic Gaussian (LQG) control theory to flexible structure is discussed. Two basic approaches for robustness enhancement were investigated: loop transfer recovery and sensitivity optimization. A third approach synthesized from elements of these two basic approaches is currently under development. The control driven finite element approximation of flexible structures is discussed. Three sets of finite element basic vectors for computing functional control gains are compared. The possibility of constructing a finite element scheme to approximate the infinite dimensional Hamiltonian system directly, instead of indirectly is discussed.

Miller's best/enhanced practices for flour fortification at the flour mill.

PubMed

Johnson, Quentin W; Wesley, Annie S

2010-03-01

Cereal flour fortification has been identified as an effective mass fortification intervention as part of a national public health strategy to overcome micronutrient deficiencies and improve the health status of populations, especially women and children. The effectiveness of cereal flour fortification programs requires the use of micronutrient premixes that provide the desired health benefits. The Miller's Best/Enhanced Practices for Flour Fortification at the flour mill has been developed to provide specific guidance to millers and government officials to ensure that flour fortification practices are carried out in a way that results in the anticipated public health impact. The paper provides information specific to the use of micronutrient premixes, feeders, the fortification process, and quality control systems to ensure that both minimum and enhanced practices can be followed by the millers. Guidelines for basic and best/enhanced practices to be followed for each stage of the flour fortification process at the flour mill are presented. The paper is designed to be a companion to the Recommended Practices for the Production and Procurement of Premix used in Cereal Fortification Programs and supplementary to existing food quality manuals and systems, such as Good Manufacturing Practices, Food Quality Systems, and Hazard Analysis and Critical Control Points. Other stakeholders involved in flour fortification programs have the responsibility to follow best practices of their own to ensure optimum effectiveness.

Effects of chitosan oligosaccharides on microbiota composition of silver carp (Hypophthalmichthys molitrix) determined by culture-dependent and independent methods during chilled storage.

PubMed

Jia, Shiliang; Liu, Xiaochang; Huang, Zhan; Li, Yan; Zhang, Longteng; Luo, Yongkang

2018-03-02

This study evaluated the effects of chitosan oligosaccharides (COS) on the changes in quality and microbiota of silver carp fillets stored at 4 °C. During storage, 1% (w/v) COS treated samples maintained good quality, as evidenced by retarding sensory deterioration, inhibiting microbial growth, attenuating the production of total volatile basic nitrogen, putrescine, cadaverine and hypoxanthine, and delaying degradation of inosine monophosphate and hypoxanthine ribonucleotide. Meanwhile, variability in the predominant microbiota in different samples was investigated by culture-dependent and -independent methods. Based on sensory analysis, shelf-life of silver carp fillets was 4 days for the control and 6 days for COS treated samples. Meanwhile, Pseudomonas, followed by Aeromonas, Acinetobacter, and Shewanella were dominated in the control samples at day 4 and contributed to fish spoilage at day 6. However, COS inhibited the growth of Pseudomonas, Aeromonas, and Shewanella significantly. Consequently, Acinetobacter followed by Pseudomonas became the predominant microbiota in COS treated samples at day 6. With the growth of Pseudomonas, COS treated samples were spoiled at day 8. Therefore, COS improved the quality of fillets and prolonged the shelf life of silver carp fillets by 2 days during chilled storage, which was mainly due to their modulating effects on microbiota. Copyright © 2018 Elsevier B.V. All rights reserved.

Adult Basic Education in British Columbia's Public Post-Secondary Institutions. An Articulation Handbook. 2007-2008 Edition

ERIC Educational Resources Information Center

Ministry of Advanced Education, 2007

2007-01-01

This is the twenty-second edition of the Adult Basic Education (ABE) Articulation Handbook for British Columbia's public postsecondary institutions. The purpose of ABE articulation is to ensure learners have access to quality courses, receive appropriate credits and are able to transfer easily among publicly-funded colleges, university colleges,…

Energy and the Environment. Environmental Studies. 4 Color Transparencies, Reproducibles & Teaching Guide. Grade 3, 4, 5.

ERIC Educational Resources Information Center

Ortleb, Edward P.; And Others

The world is faced with a variety of environmental problems. No country has escaped pollution and resource depletion. Basic ecological principles are often ignored and sometimes this contributes to ecological disasters. This volume is designed to provide basic information about the quality of the earth's energy resources. The visual aids,…