29 CFR 1960.58 - Training of collateral duty safety and health personnel and committee members.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and environments; identification and use of occupational safety and health standards, and other... 29 Labor 9 2012-07-01 2012-07-01 false Training of collateral duty safety and health personnel and... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL...

29 CFR 1960.58 - Training of collateral duty safety and health personnel and committee members.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and environments; identification and use of occupational safety and health standards, and other... 29 Labor 9 2011-07-01 2011-07-01 false Training of collateral duty safety and health personnel and... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL...

29 CFR 1960.58 - Training of collateral duty safety and health personnel and committee members.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and environments; identification and use of occupational safety and health standards, and other... 29 Labor 9 2014-07-01 2014-07-01 false Training of collateral duty safety and health personnel and... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL...

29 CFR 1960.58 - Training of collateral duty safety and health personnel and committee members.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and environments; identification and use of occupational safety and health standards, and other... 29 Labor 9 2013-07-01 2013-07-01 false Training of collateral duty safety and health personnel and... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL...

25 CFR 36.90 - What recreation, academic tutoring, student safety, and health care services must homeliving...

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false What recreation, academic tutoring, student safety, and... AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN... What recreation, academic tutoring, student safety, and health care services must homeliving programs...

25 CFR 36.90 - What recreation, academic tutoring, student safety, and health care services must homeliving...

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false What recreation, academic tutoring, student safety, and... AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN... What recreation, academic tutoring, student safety, and health care services must homeliving programs...

25 CFR 36.90 - What recreation, academic tutoring, student safety, and health care services must homeliving...

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true What recreation, academic tutoring, student safety, and... AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN... What recreation, academic tutoring, student safety, and health care services must homeliving programs...

48 CFR 22.102-2 - Administration.

Code of Federal Regulations, 2010 CFR

2010-10-01

... and enforcement of the Occupational Safety and Health Act. The Department of Labor's Wage and Hour..., Copeland Act, and Contract Work Hours and Safety Standards Act. Contracting officers should contact the... PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Basic Labor Policies 22.102-2 Administration...

29 CFR 1904.9 - Recording criteria for cases involving medical removal under OSHA standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... under OSHA standards. 1904.9 Section 1904.9 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR RECORDING AND REPORTING OCCUPATIONAL INJURIES AND... removal under OSHA standards. (a) Basic requirement. If an employee is medically removed under the medical...

29 CFR 1904.9 - Recording criteria for cases involving medical removal under OSHA standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... under OSHA standards. 1904.9 Section 1904.9 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR RECORDING AND REPORTING OCCUPATIONAL INJURIES AND... removal under OSHA standards. (a) Basic requirement. If an employee is medically removed under the medical...

Dose limits to the lens of the eye: International Basic Safety Standards and related guidance.

PubMed

Boal, T J; Pinak, M

2015-06-01

The International Atomic Energy Agency (IAEA) safety requirements: 'General Safety Requirements Part 3--Radiation protection and safety of radiation sources: International Basic Safety Standards' (BSS) was approved by the IAEA Board of Governors at its meeting in September 2011, and was issued as General Safety Requirements Part 3 in July 2014. The equivalent dose limit for the lens of the eye for occupational exposure in planned exposure situations was reduced from 150 mSv year(-1) to 20 mSv year(-1), averaged over defined periods of 5 years, with no annual dose in a single year exceeding 50 mSv. This reduction in the dose limit for the lens of the eye followed the recommendation of the International Commission on Radiological Protection in its statement on tissue reactions of 21 April 2011. IAEA has developed guidance on the implications of the new dose limit for the lens of the eye. This paper summarises the process that led to the inclusion of the new dose limit for the lens of the eye in the BSS, and the implications of the new dose limit. © The International Society for Prosthetics and Orthotics Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

The OSHA standard setting process: role of the occupational health nurse.

PubMed

Klinger, C S; Jones, M L

1994-08-01

1. Occupational health nurses are the health professionals most often involved with the worker who suffers as a result of ineffective or non-existent safety and health standards. 2. Occupational health nurses are familiar with health and safety standards, but may not understand or participate in the rulemaking process used to develop them. 3. Knowing the eight basic steps of rulemaking and actively participating in the process empowers occupational health nurses to influence national policy decisions affecting the safety and health of millions of workers. 4. By actively participating in rulemaking activities, occupational health nurses also improve the quality of occupational health nursing practice and enhance the image of the nursing profession.

Basic Training Program for Emergency Medical Technician Ambulance: Course Guide.

ERIC Educational Resources Information Center

Fucigna, Joseph T.; And Others

In an effort to upgrade or further develop the skills levels of all individuals involved in the emergency medical care service, this training program was developed for the National Highway Safety Bureau. This specific course is an attempt to organize, conduct, and standardize a basic training course for emergency medical technicians (EMTs). The…

ASRM standard embryo transfer protocol template: a committee opinion.

PubMed

Penzias, Alan; Bendikson, Kristin; Butts, Samantha; Coutifaris, Christos; Falcone, Tommaso; Fossum, Gregory; Gitlin, Susan; Gracia, Clarisa; Hansen, Karl; Mersereau, Jennifer; Odem, Randall; Rebar, Robert; Reindollar, Richard; Rosen, Mitchell; Sandlow, Jay; Vernon, Michael

2017-04-01

Standardization improves performance and safety. A template for standardizing the embryo transfer procedure is presented here with 12 basic steps supported by published scientific literature and a survey of common practice of SART programs; it can be used by ART practices to model their own standard protocol. Copyright © 2017 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Standardized Curriculum for Electrician.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: electrician I and II. The 11 units in electrician I are as follows: orientation; safety; tools, equipment, materials/supplies; basic principles and theory; DC circuits; AC circuits; blueprints and load calculations; load centers and…

Standardized Curriculum for Automotive Mechanics.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: automotive mechanics I and II. The six units in automotive mechanics I are as follows: orientation and safety; tools, equipment, and manuals; measurement; automotive engines; basic electrical systems; and fuel systems. Automotive…

Standardized Curriculum for Carpentry.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: carpentry I and II. The seven units in carpentry I are as follows: introduction and orientation; safety; measurement; tools and equipment; basic concepts in carpentry; reading blueprints and working drawings; and foundations.…

Standardized Curriculum for Electricity/Electronics.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized vocational education course titles and core contents are provided for two courses in Mississippi: electricity/electronics I and II. The first course contains the following units: (1) orientation, safety, and leadership; (2) basic principles of electricity/electronics; (3) direct current (DC) theory; (4) magnetism and DC motors; (5)…

Justification of system of assessment of ecological safety degree of housing construction objects

NASA Astrophysics Data System (ADS)

Kankhva, Vadim

2017-10-01

In article characteristics and properties of competitiveness of housing construction objects are investigated, criteria and points of national systems of ecological building’s standardization are structured, the compliance assessment form on stages of life cycle of a capital construction project is developed. The main indicators of level of ecological safety considering requirements of the international ISO standards 9000 and ISO 14000 and which are based on the basic principles of general quality management (TQM) are presented.

Commercial Vessel Safety. Economic Costs. Preliminary.

DTIC Science & Technology

1979-12-01

or "rippled" through the economy when a regulation is implemented. The survey associated with determination of costs focused upon two basic areas...in their application of standard financial principles and in their utilization of basic ship cost components (e.g., investment and operating costs...on the estimation of costs per ton of capacity provided. The basic unit for analyzing ships’ costs used is a single voyage (round trip) on a particular

Standardized Curriculum for Brick, Block, and Stonemasonry.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: brick, block, and stonemasonry I and II. The six units in brick, block, and stonemasonry I are as follows: orientation and leadership activities; safety; basic tools and equipment; masonry units; mortar; and wall layout. Brick, block,…

Lift truck safety review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cadwallader, L.C.

1997-03-01

This report presents safety information about powered industrial trucks. The basic lift truck, the counterbalanced sit down rider truck, is the primary focus of the report. Lift truck engineering is briefly described, then a hazard analysis is performed on the lift truck. Case histories and accident statistics are also given. Rules and regulations about lift trucks, such as the US Occupational Safety an Health Administration laws and the Underwriter`s Laboratories standards, are discussed. Safety issues with lift trucks are reviewed, and lift truck safety and reliability are discussed. Some quantitative reliability values are given.

Fire safety: A case study of technology transfer

NASA Technical Reports Server (NTRS)

Heins, C. F.

1975-01-01

Two basic ways in which NASA-generated technology is being used by the fire safety community are described. First, improved products and systems that embody NASA technical advances are entering the marketplace. Second, NASA test data and technical information related to fire safety are being used by persons concerned with reducing the hazards of fire through improved design information and standards. The development of commercial fire safety products and systems typically requires adaptation and integration of aerospace technologies that may not have been originated for NASA fire safety applications.

34 CFR Appendix A to Part 74 - Contract Provisions

Code of Federal Regulations, 2010 CFR

2010-07-01

... suspected or reported violations to the Federal awarding agency. 4. Contract Work Hours and Safety Standards... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work... basic rate of pay for all hours worked in excess of 40 hours in the work week. Section 107 of the Act is...

36 CFR Appendix A to Part 1210 - Contract Provisions

Code of Federal Regulations, 2010 CFR

2010-07-01

... suspected or reported violations to the Federal awarding agency. 4. Contract Work Hours and Safety Standards... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work... basic rate of pay for all hours worked in excess of 40 hours in the work week. Section 107 of the Act is...

10 CFR Appendix A to Subpart B of... - Contract Provisions

Code of Federal Regulations, 2010 CFR

2010-01-01

... suspected or reported violations to the Federal awarding agency. 4. Contract Work Hours and Safety Standards... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work... basic rate of pay for all hours worked in excess of 40 hours in the work week. Section 107 of the Act is...

46 CFR 12.15-3 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... years the minimum standards of competence for the following 4 areas of basic safety: (1) Personal... first aid as set out in table A-VI/1-3 of the STCW Code. (4) Personal safety and social responsibilities... of competence set out in STCW Regulation III/4 and Section A-III/4 of the STCW Code (incorporated by...

Food sanitation practices in restaurants of Ramallah and Al-Bireh district of Palestine.

PubMed

Al-Khatib, I A; Al-Mitwalli, S M

2009-01-01

Safe handling of food in restaurants is a basic element in the reduction of foodborne illness. We investigated knowledge and practices about food safety by food-handlers in restaurants in Ramallah and Al-Bireh district of Palestine. A high proportion of workers in the restaurants had no previous experience in other restaurants and 63.4% had received no training on food sanitation and safety. Most of the restaurants in the refugee camps, villages and towns had only 1 worker. Restaurants lacked basic conditions for food sanitation and safety, such as hot water in most and cleaning materials in some. Many workers had poor personal hygiene practices. Training is needed for restaurant owners and staff to improve food handling practices and standards.

A Primer for DoD Reliability, Maintainability and Safety Standards

DTIC Science & Technology

1988-03-02

the project engineer and the concurrence of their respective managers. The primary consideration in such cases is the thoroughness of the ...basic approaches to the application of environmental stress screening. In one approach, the government explicitly specifies the screens and screening...TO USE DOD-HDBK-344 (USAF) There are two basic approaches to the application of environmental stress

Improving health, safety and energy efficiency in New Zealand through measuring and applying basic housing standards.

PubMed

Gillespie-Bennett, Julie; Keall, Michael; Howden-Chapman, Philippa; Baker, Michael G

2013-08-02

Substandard housing is a problem in New Zealand. Historically there has been little recognition of the important aspects of housing quality that affect people's health and safety. In this viewpoint article we outline the importance of assessing these factors as an essential step to improving the health and safety of New Zealanders and household energy efficiency. A practical risk assessment tool adapted to New Zealand conditions, the Healthy Housing Index (HHI), measures the physical characteristics of houses that affect the health and safety of the occupants. This instrument is also the only tool that has been validated against health and safety outcomes and reported in the international peer-reviewed literature. The HHI provides a framework on which a housing warrant of fitness (WOF) can be based. The HHI inspection takes about one hour to conduct and is performed by a trained building inspector. To maximise the effectiveness of this housing quality assessment we envisage the output having two parts. The first would be a pass/fail WOF assessment showing whether or not the house meets basic health, safety and energy efficiency standards. The second component would rate each main assessment area (health, safety and energy efficiency), potentially on a five-point scale. This WOF system would establish a good minimum standard for rental accommodation as well encouraging improved housing performance over time. In this article we argue that the HHI is an important, validated, housing assessment tool that will improve housing quality, leading to better health of the occupants, reduced home injuries, and greater energy efficiency. If required, this tool could be extended to also cover resilience to natural hazards, broader aspects of sustainability, and the suitability of the dwelling for occupants with particular needs.

An Assessment of Basic Patient Safety Skills in Residents Entering the First Year of Clinical Training.

PubMed

Comunale, Mark E; Sandoval, Mathew; Broussard, La Toya

2018-06-01

During safety rounds, we observed few residents demonstrating hand hygiene and patient identification as they began their postgraduate clinical training. We assessed baseline performance of these 2 basic safety skills in residents entering the first year of postgraduate clinical training (PGY1). PGY1 residents beginning training on July 1, 2013, and July 1, 2014, at our institution were examined using a simulated scenario testing for hand hygiene and patient identification. Nurse volunteers posed as patients and evaluated each resident using a standardized scoring tool. Residents were observed for the following behaviors when interacting: (1) hand hygiene before or upon entry into the patient's room (HHE); (2) resident introducing himself or herself (INTRO); (3) resident identifying patient (IDNB); (4) resident comparing patient's stated name and date of birth to patient's ID band (IDC); (5) resident explaining procedure to patient (EXP); and (6) resident performing hand hygiene upon exiting patient's room (HHL). A total of 114 residents were examined. Compliance results were as follows: HHE at 66% (75); INTRO at 96% (110); IDNB at 52% (59); IDC at 42% (48); EXP at 90% (103); and HHL at 58% (66). Developing and hardwiring basic patient safety skills is essential for creating an institutional culture of safety. We used a simulated patient scenario to provide a baseline assessment of 2 important safety skills.The results obtained demonstrate poor compliance with hand hygiene and patient identification. Our results suggest that there is a need for additional training and perhaps new methods of training and reinforcement in medical school and beyond, to hardwire these basic patient safety skills.

22 CFR Appendix A to Part 145 - Clauses for Contracts and Small Purchases Awarded by Recipient

Code of Federal Regulations, 2010 CFR

2010-04-01

... suspected or reported violations to the Department. 4. Contract Work Hours and Safety Standards Act (40 U.S... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work... basic rate of pay for all hours worked in excess of 40 hours in the work week. Section 107 of the Act is...

A real-time standard parts inspection based on deep learning

NASA Astrophysics Data System (ADS)

Xu, Kuan; Li, XuDong; Jiang, Hongzhi; Zhao, Huijie

2017-10-01

Since standard parts are necessary components in mechanical structure like bogie and connector. These mechanical structures will be shattered or loosen if standard parts are lost. So real-time standard parts inspection systems are essential to guarantee their safety. Researchers would like to take inspection systems based on deep learning because it works well in image with complex backgrounds which is common in standard parts inspection situation. A typical inspection detection system contains two basic components: feature extractors and object classifiers. For the object classifier, Region Proposal Network (RPN) is one of the most essential architectures in most state-of-art object detection systems. However, in the basic RPN architecture, the proposals of Region of Interest (ROI) have fixed sizes (9 anchors for each pixel), they are effective but they waste much computing resources and time. In standard parts detection situations, standard parts have given size, thus we can manually choose sizes of anchors based on the ground-truths through machine learning. The experiments prove that we could use 2 anchors to achieve almost the same accuracy and recall rate. Basically, our standard parts detection system could reach 15fps on NVIDIA GTX1080 (GPU), while achieving detection accuracy 90.01% mAP.

Safety Criticality Standards Using the French CRISTAL Code Package: Application to the AREVA NP UO{sub 2} Fuel Fabrication Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doucet, M.; Durant Terrasson, L.; Mouton, J.

2006-07-01

Criticality safety evaluations implement requirements to proof of sufficient sub critical margins outside of the reactor environment for example in fuel fabrication plants. Basic criticality data (i.e., criticality standards) are used in the determination of sub critical margins for all processes involving plutonium or enriched uranium. There are several criticality international standards, e.g., ARH-600, which is one the US nuclear industry relies on. The French Nuclear Safety Authority (DGSNR and its advising body IRSN) has requested AREVA NP to review the criticality standards used for the evaluation of its Low Enriched Uranium fuel fabrication plants with CRISTAL V0, the recentlymore » updated French criticality evaluation package. Criticality safety is a concern for every phase of the fabrication process including UF{sub 6} cylinder storage, UF{sub 6}-UO{sub 2} conversion, powder storage, pelletizing, rod loading, assembly fabrication, and assembly transportation. Until 2003, the accepted criticality standards were based on the French CEA work performed in the late seventies with the APOLLO1 cell/assembly computer code. APOLLO1 is a spectral code, used for evaluating the basic characteristics of fuel assemblies for reactor physics applications, which has been enhanced to perform criticality safety calculations. Throughout the years, CRISTAL, starting with APOLLO1 and MORET 3 (a 3D Monte Carlo code), has been improved to account for the growth of its qualification database and for increasing user requirements. Today, CRISTAL V0 is an up-to-date computational tool incorporating a modern basic microscopic cross section set based on JEF2.2 and the comprehensive APOLLO2 and MORET 4 codes. APOLLO2 is well suited for criticality standards calculations as it includes a sophisticated self shielding approach, a P{sub ij} flux determination, and a 1D transport (S{sub n}) process. CRISTAL V0 is the result of more than five years of development work focusing on theoretical approaches and the implementation of user-friendly graphical interfaces. Due to its comprehensive physical simulation and thanks to its broad qualification database with more than a thousand benchmark/calculation comparisons, CRISTAL V0 provides outstanding and reliable accuracy for criticality evaluations for configurations covering the entire fuel cycle (i.e. from enrichment, pellet/assembly fabrication, transportation, to fuel reprocessing). After a brief description of the calculation scheme and the physics algorithms used in this code package, results for the various fissile media encountered in a UO{sub 2} fuel fabrication plant will be detailed and discussed. (authors)« less

The Auto

ERIC Educational Resources Information Center

Novick, Sheldon

1976-01-01

The basic automobile design has persisted for fifty years with innovations only in production and marketing. Complex interrelationships among steel, oil, rubber, road building, and automobile industries perpetuate the "modern Model T's." Efforts to alter design to meet safety and environmental standards face tremendous resistance from a…

15 CFR Appendix A to Part 14 - Contract Provisions

Code of Federal Regulations, 2010 CFR

2010-01-01

... wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of... than 11/2 times the basic rate of pay for all hours worked in excess of 40 hours in the work week.... Contract Work Hours and Safety Standards Act (40 U.S.C. 327-333)—Where applicable, all contracts awarded by...

Afghanistan in the Balance: Air Politik

DTIC Science & Technology

2010-06-01

satisfying basic physiological needs, such as food and water; then safety; love and belonging, esteem , and self -actualization. 17 In a contemporary...Instead, through an understanding of shared self -interests, states produce norms and standards of behavior that can be temporally enabling but are also...regime guided by the principles of the Peace of Westphalia (1648). This standard acknowledges the right of a state to self -determination. In this

Generation III reactors safety requirements and the design solutions

NASA Astrophysics Data System (ADS)

Felten, P.

2009-03-01

Nuclear energy's public acceptance, and hence its development, depends on its safety. As a reactor designer, we will first briefly remind the basic safety principles of nuclear reactors' design. We will then show how the industry, and in particular Areva with its EPR, made design evolution in the wake of the Three Miles Island accident in 1979. In particular, for this new generation of reactors, severe accidents are taken into account beyond the standard design basis accidents. Today, Areva's EPR meets all so-called "generation III" safety requirements and was licensed by several nuclear safety authorities in the world. Many innovative solutions are integrated in the EPR, some of which will be introduced here.

Establishment and implementation of common product assurance and safety requirements for the contractors of the Columbus programme

NASA Astrophysics Data System (ADS)

Wessels, H.; Stephan, H. J.

1991-08-01

When establishing the Columbus Product Assurance (PA)/safety requirements, the international environment of the Space Station Freedom program has to be taken into account. Considerations given to multiple ways of requirement definition and stages within the European Space Agency (ESA) Procedures, Specifications, and Standards (PSS-01) series of documents and the NASA Space Station requirements are discussed. A series of adaptations introduced by way of tailoring the basic ESA and NASA requirement sets to the Columbus program's needs are described. For the implementation of these tailored requirements, a scheme is developed, which recognizes the PA/safety approach within the European industries by way of various company handbooks and manuals. The changes introduced in the PSS-01 series and the applicable NASA Space Station requirements in recent years, has coincided with the establishment of Columbus PA/safety requirements. To achieve the necessary level of cooperation between ESA and the Columbus industries, a PA Working Group (PAWG) is established. The PAWG supervises the establishement of the Common PA/Safety Plan and the Standards to be used. Due to the high number of European industries participating in the Columbus program, a positive influence on the evolution of the industrial approaches in PA/safety can be expected. Cooperation in the PAWG has brought issues to light which are related to the ESA PSS-01 series and its requirements. Due to the rapid changes of recent years, basic company documentation has not followed the development, specifically as various recent ESA projects use different project specifc issues of the evolving PSS-01 documents.

Lead exposure in a tank demolition crew: implications for the new OSHA construction lead standard.

PubMed

Waller, K; Osorio, A M; Jones, J

1994-11-01

The Federal Occupational Safety and Health Administration (OSHA) has recently extended the basic health and safety provisions of the OSHA lead standard for general industry to workers in the construction industry. In this report we describe a tank demolition worksite that midway through the project strengthened its lead exposure control activities to a level that approximated the current lead standard. Of 12 tested ironworkers and laborers who worked at the site before the change, zinc protoporphyrin levels increased and seven developed blood lead levels (BLL) > 50 micrograms/dL. After the change these workers' BLLs declined. Six workers hired after the change did not experience increases in zinc protoporphyrin and none developed BLL > 25 micrograms/dL. The experience at this worksite demonstrates the usefulness and feasibility of implementing the current lead standard in construction settings.

48 CFR 22.403-3 - Contract Work Hours and Safety Standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... (see 52.222-4) specifying that no laborer or mechanic doing any part of the work contemplated by the... additional hours at not less than 1 1/2 times the basic rate of pay (see 22.301). [79 FR 24203, Apr. 29, 2014] ...

48 CFR 22.403-3 - Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 22.305) contain a clause (see 52.222-4) specifying that no laborer or mechanic doing any part of the... workweek unless paid for all additional hours at not less than 11/2 times the basic rate of pay (see 22.301...

29 CFR 5.8 - Liquidated damages under the Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2014 CFR

2014-07-01

... or mechanics shall be paid wages at a rate not less than one and one-half times the basic rate of pay... liquidated damages, computed with respect to each laborer or mechanic employed in violation of the Act in the...

29 CFR 5.8 - Liquidated damages under the Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2012 CFR

2012-07-01

... or mechanics shall be paid wages at a rate not less than one and one-half times the basic rate of pay... liquidated damages, computed with respect to each laborer or mechanic employed in violation of the Act in the...

48 CFR 22.403-3 - Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 22.305) contain a clause (see 52.222-4) specifying that no laborer or mechanic doing any part of the... workweek unless paid for all additional hours at not less than 11/2 times the basic rate of pay (see 22.301...

29 CFR 5.8 - Liquidated damages under the Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2013 CFR

2013-07-01

... or mechanics shall be paid wages at a rate not less than one and one-half times the basic rate of pay... liquidated damages, computed with respect to each laborer or mechanic employed in violation of the Act in the...

Balancing Safety and Economy.

ERIC Educational Resources Information Center

Leeds, Robin L.

1999-01-01

Administrators looking for budget relief might look for cost savings in pupil transportation. The basic school bus that meets federal standards, with no optional equipment, is the safest vehicle on the road. The best investment in a transportation program is driver training. Route and schedule changes might lead to an increase in efficiency…

School Districts Face New Limitations under Commercial Drivers License Rules.

ERIC Educational Resources Information Center

Finkel, Karen

1990-01-01

Summarizes the Commercial Motor Vehicle Safety Act of 1986 requirements, discusses problems engendered by new state laws, and tells how school administrators can ensure that their state's law does not inhibit school bus driver recruitment and retainment. Basically, multiple commercial licenses are now illegal, and alcohol impairment standards are…

The Informatics Opportunities at the Intersection of Patient Safety and Clinical Informatics

PubMed Central

Kilbridge, Peter M.; Classen, David C.

2008-01-01

Health care providers have a basic responsibility to protect patients from accidental harm. At the institutional level, creating safe health care organizations necessitates a systematic approach. Effective use of informatics to enhance safety requires the establishment and use of standards for concept definitions and for data exchange, development of acceptable models for knowledge representation, incentives for adoption of electronic health records, support for adverse event detection and reporting, and greater investment in research at the intersection of informatics and patient safety. Leading organizations have demonstrated that health care informatics approaches can improve safety. Nevertheless, significant obstacles today limit optimal application of health informatics to safety within most provider environments. The authors offer a series of recommendations for addressing these challenges. PMID:18436896

OSHA TB standard adds teeth to CDC guidelines. Occupational Safety and Health Administration. Centers for Disease Control and Prevention.

PubMed

1997-12-01

The Occupational Safety and Health Administration (OSHA) has published a proposed standard to provide health care workers with more protection against tuberculosis (TB). With one-quarter of new TB cases occurring in HIV-infected people, 5.3 million workers treating AIDS patients and working with at-risk populations need to be aware of the proposed guidelines. OSHA estimates that the new standard could eliminate most work-related TB infections and save up to $116 million in medical costs and lost production. The OSHA standards vary from those of the Centers for Disease Control (CDC) in several ways. CDC guidelines are voluntary, whereas OSHA standards are enforceable and facilities can be fined for violations. Although OSHA standards have incorporated basic elements of the CDC recommendations, OSHA standards also would require employers to conduct exposure assessments, require six-month skin testing, and call for respirator use in more instances. OSHA officials expect broad participation at public hearings on the new standard, scheduled to begin in February 1998.

Solar Photovoltaic DC Systems: Basics and Safety: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

McNutt, Peter F; Sekulic, William R; Dreifuerst, Gary

Solar Photovoltaic (PV) systems are common and growing with 42.4 GW installed capacity in U.S. (almost 15 GW added in 2016). This paper will help electrical workers, and emergency responders understand the basic operating principles and hazards of PV DC arrays. We briefly discuss the following aspects of solar photovoltaic (PV) DC systems: the effects of solar radiation and temperature on output power; PV module testing standards; common system configurations; a simple PV array sizing example; NEC guidelines and other safety features; DC array commissioning, periodic maintenance and testing; arc-flash hazard potential; how electrical workers and emergency responders can andmore » do work safely around PV arrays; do moonlight and artificial lighting pose a real danger; typical safe operating procedures; and other potential DC-system hazards to be aware of. We also present some statistics on PV DC array electrical incidents and injuries. Safe PV array operation is possible with a good understanding of PV DC arrays basics and having good safe operating procedures in place.« less

[Industry regulation and its relationship to the rapid marketing of medical devices].

PubMed

Matsuoka, Atsuko

2012-01-01

In the market of medical devices, non-Japanese products hold a large part even in Japan. To overcome this situation, the Japanese government has been announcing policies to encourage the medical devices industry, such as the 5-year strategy for medical innovation (June 6, 2012). The Division of Medical Devices has been contributing to rapid marketing of medical devices by working out the standards for approval review and accreditation of medical devices, guidances on evaluation of medical devices with emerging technology, and test methods for biological safety evaluation of medical devices, as a part of practice in the field of regulatory science. The recent outcomes are 822 standards of accreditation for Class II medical devices, 14 guidances on safety evaluation of medical devices with emerging technology, and the revised test methods for biological safety evaluation (MHLW Notification by Director, OMDE, Yakushokuki-hatsu 0301 No. 20 "Basic Principles of Biological Safety Evaluation Required for Application for Approval to Market Medical Devices").

48 CFR 52.222-4 - Contract Work Hours and Safety Standards-Overtime Compensation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... laborers or mechanics (see Federal Acquisition Regulation 22.300) shall require or permit them to work over... basic payroll records for all laborers and mechanics working on the contract during the contract and... the employment of laborers and mechanics and require subcontractors to include these provisions in any...

Apply Pesticides Correctly, A Guide for Commercial Applicators: Seed Treatment.

ERIC Educational Resources Information Center

Wamsley, Mary Ann, Ed.; Vermeire, Donna M., Ed.

This guide contains basic information to meet specific standards for pesticide applicators. The text is concerned with the types of seeds that require chemical protection against pests. Methods of treatment and labeling requirements for such seeds as rye, wheat, soybeans, peas, and grass hybrids are discussed. Safety and environmental precautions…

Community Schools: Improving Student Learning/Strengthening Schools, Families, and Communities. A Handbook for State Policy Leaders.

ERIC Educational Resources Information Center

Coalition for Community Schools, Washington, DC.

This handbook is designed to help state leaders form vital connections between schools and communities to improve student learning. It explains that community schools are beneficial because they meet students' basic needs, including safety; offer high quality curriculum and teaching aligned with academic standards; provide learning experiences…

To recognize the use of international standards for making harmonized regulation of medical devices in Asia-pacific.

PubMed

Anand, K; Saini, Ks; Chopra, Y; Binod, Sk

2010-07-01

'Medical Devices' include everything from highly sophisticated, computerized, medical equipment, right down to simple wooden tongue depressors. Regulations embody the public expectations for how buildings and facilities are expected to perform and as such represent public policy. Regulators, who develop and enforce regulations, are empowered to act in the public's interest to set this policy and are ultimately responsible to the public in this regard. Standardization contributes to the basic infrastructure that underpins society including health and environment, while promoting sustainability and good regulatory practice. The international organizations that produce International Standards are the International Electrotechnical Commission (IEC), the International Organization for Standardization (ISO), and the International Telecommunication Union (ITU). With the increasing globalization of markets, International Standards (as opposed to regional or national standards) have become critical to the trading process, ensuring a level playing field for exports, and ensuring that imports meet the internationally recognized levels of performance and safety. The development of standards is done in response to sectors and stakeholders that express a clearly established need for them. An industry sector or other stakeholder group typically communicates its requirement for standards to one of the national members. To be accepted for development, a proposed work item must receive a majority support of the participating members, who verify the global relevance of the proposed item. The regulatory authority (RA) should provide a method for the recognition of international voluntary standards and for public notification of such recognition. The process of recognition may vary from country to country. Recognition may occur by periodic publication of lists of standards that a regulatory authority has found will meet the Essential Principles. In conclusion, International standards, such as, basic standards, group standards, and product standards, are a tool for harmonizing regulatory processes, to assure the safety, quality, and performance of medical devices. Standards represent the opinion of experts from all interested parties, including industry, regulators, users, and others.

[Summary of development in scientific researches of traditional Chinese medicine in twenty years（1996-2015）].

PubMed

2016-11-01

The modernization strategy of traditional Chinese medicine (TCM) has been implemented for 20 years. A great deal of basic and innovative researches have been done on basic theory of TCM, effective substance, efficacy evaluation, action mechanism, intracorporal metabolic process, safety evaluation, clinical evaluation and quality standards. As a result, a series of remarkable achievements in scientific research have been generated and promoted the interpretation of the connotation of TCM, supported the industry development of TCM and accelerated internationalization of TCM. Copyright© by the Chinese Pharmaceutical Association.

Results of EUREKA project STILMED: transfer to standards

NASA Astrophysics Data System (ADS)

Woellmer, Wolfgang

1996-12-01

The final results of the German part of the joint project STILMED 'Safety Technology in Laser Medicine' are available and being prepared for publication. The question is raised, if parts of these results may be subject to international standards. An overview is given for the structure and procedure of national, European and international standardization. Existing standards are considered concerning their relationship to STILMED, which dealt with the chemical, particulate and microbiological composition and possible hazards of laser plume, as well as protection means, like plume evacuators, including the development of nozzles and instruments with integrated evacuation channels, and face masks. Results of basic research and experiences with medical treatment modalities are not matter for standardization. On the other hand, plume evacuators and their technical data should be submitted to standards, which define test procedures for their performance and safety. Also, surgical face masks, for which no international standards exists, could be well suited for standardization, although the multitude of application conditions would make it an excessive task. At least, products that claim 'for laser use' or 'laserproof' or similar should fulfill standardized requirements, and the respective wording needs protection by standard definition.

41 CFR 102-80.10 - What are the basic safety and environmental management policies for real property?

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety and environmental management policies for real property? 102-80.10 Section 102-80.10 Public... MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT General Provisions § 102-80.10 What are the basic safety and environmental management policies for real property? The basic safety and...

A Review of the Anthropometric and Strength Standards of the Canadian Motor Vehicle Safety Standard,

DTIC Science & Technology

1980-02-01

to manipulate them to fit a0 3 particular design. For example, the designer is required to be familiar with certain biomechanical properties of the...see Ref. 11 for example). What is probably required is the dynamic anthropometry approach used by Ely et al. (Ref. 10) to determine the overall pedal ... biomechanical model, COMBIMAN (Ref. 13) has universal application because the basic parameters of the model can be altered to represent any desired

Safety and efficacy of collagen crosslinking for the treatment of keratoconus.

PubMed

Kolli, Sai; Aslanides, Ioannis M

2010-11-01

Keratoconus is a condition that causes corneal ectasia and reduced vision in young adults. A proportion of these patients have progressive disease requiring corneal transplantation. A revolutionary new treatment that is purported to halt progression of keratoconus, known as collagen crosslinking (CXL), has recently been introduced into clinical practice. CXL involves the treatment of the cornea with riboflavin followed by photoactivation with UVA light leading to corneal strengthening. This article reviews the basic science, clinical protocols, safety aspects and clinical results of CXL. The reader will gain a comprehensive understanding of: i) the basic science of CXL; ii) the optimised protocols for clinical use of CXL; iii) the results of all the main clinical trials in the literature; iv) contraindications to treatment and v) full clinical safety profile of CXL. CXL represents a new treatment that uniquely allows the halt of progression of keratoconus, thus preventing visual loss and the need for surgical intervention. Available data suggest that this treatment has high efficacy and is very safe and may represent the future standard treatment for progressive keratoconus.

46 CFR 15.1105 - Familiarization and basic safety-training.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Familiarization and basic safety-training. 15.1105 Section 15.1105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Vessels Subject to Requirements of STCW § 15.1105 Familiarization and basic safety...

46 CFR 15.1105 - Familiarization and basic safety-training.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Familiarization and basic safety-training. 15.1105 Section 15.1105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Vessels Subject to Requirements of STCW § 15.1105 Familiarization and basic safety...

46 CFR 15.1105 - Familiarization and basic safety-training.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Familiarization and basic safety-training. 15.1105 Section 15.1105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Vessels Subject to Requirements of STCW § 15.1105 Familiarization and basic safety...

46 CFR 15.1105 - Familiarization and basic safety-training.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Familiarization and basic safety-training. 15.1105 Section 15.1105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Vessels Subject to Requirements of STCW § 15.1105 Familiarization and basic safety...

Basis for standards: ICRP activities.

PubMed

Vano, E

2015-07-01

The purpose of this chapter is to describe work achieved recently by the International Commission on Radiological Protection (ICRP) and especially by Committee 3 (Protection in Medicine) and its use for standards. In March 1960, the Board of Governors of the International Atomic Energy Agency approved the Agency's 'Health and Safety Measures', stating that the Agency's 'Basic Safety Standards' (BSS) would be based, to the extent possible, on the recommendations of the ICRP. In a similar way, the Council of the European Union took into account the new recommendations of the ICRP when adopting the new Directive 2013/59/EURATOM that laid down BSS for protection against the dangers arising from exposure to ionising radiation. The new limit for the lens of the eyes for occupational exposures has been incorporated into these international standards and several articles dealing with medical exposures: justification, optimisation, recording patient doses, the use of diagnostic reference levels, training, accidental and unintended exposures, etc. have also been included in agreement with the ICRP recommendations. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Challenges in Developing Competency-based Training Curriculum for Food Safety Regulators in India.

PubMed

Thippaiah, Anitha; Allagh, Komal Preet; Murthy, G V

2014-07-01

The Food Safety and Standards Act have redefined the roles and responsibilities of food regulatory workforce and calls for highly skilled human resources as it involves complex management procedures. 1) Identify the competencies needed among the food regulatory workforce in India. 2) Develop a competency-based training curriculum for food safety regulators in the country. 3) Develop training materials for use to train the food regulatory workforce. The Indian Institute of Public Health, Hyderabad, led the development of training curriculum on food safety with technical assistance from the Royal Society for Public Health, UK and the National Institute of Nutrition, India. The exercise was to facilitate the implementation of new Act by undertaking capacity building through a comprehensive training program. A competency-based training needs assessment was conducted before undertaking the development of the training materials. THE TRAINING PROGRAM FOR FOOD SAFETY OFFICERS WAS DESIGNED TO COMPRISE OF FIVE MODULES TO INCLUDE: Food science and technology, Food safety management systems, Food safety legislation, Enforcement of food safety regulations, and Administrative functions. Each module has a facilitator guide for the tutor and a handbook for the participant. Essentials of Food Hygiene-I (Basic level), II and III (Retail/ Catering/ Manufacturing) were primarily designed for training of food handlers and are part of essential reading for food safety regulators. The Food Safety and Standards Act calls for highly skilled human resources as it involves complex management procedures. Despite having developed a comprehensive competency-based training curriculum by joint efforts by the local, national, and international agencies, implementation remains a challenge in resource-limited setting.

75 FR 52737 - Pesticide Product Registrations; Unconditional and Conditional Approvals

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-27

... extent of potential exposure. Based on these reviews, the Agency was able to make basic health and safety.... Based on these reviews, the Agency was able to make basic health and safety determinations that show use.... Based on these reviews, the Agency was able to make basic health and safety determinations that show use...

Possible overexposure of pregnant women to emissions from a walk through metal detector.

PubMed

Wu, Dagang; Qiang, Rui; Chen, Ji; Seidman, Seth; Witters, Donald; Kainz, Wolfgang

2007-10-07

This paper presents a systematic procedure to evaluate the induced current densities and electric fields due to walk-through metal detector (WTMD) exposure. This procedure is then used to assess the exposure of nine pregnant women models exposed to one WTMD model. First, we measured the magnetic field generated by the WTMD, then we extracted the equivalent current source to represent the WTMD emissions and finally we calculated the induced current densities and electric fields using the impedance method. The WTMD emissions and the induced fields in the pregnant women and fetus models are then compared to the ICNIRP Guidelines and the IEEE C95.6 exposure safety standard. The results prove the consistency between maximum permissible exposure (MPE) levels and basic restrictions for the ICNIRP Guidelines and IEEE C95.6. We also found that this particular WTMD complies with the ICNIRP basic restrictions for month 1-5 models, but leads to both fetus and pregnant women overexposure for month 6-9 models. The IEEE C95.6 restrictions (MPEs and basic restrictions) are not exceeded. The fetus overexposure of this particular WTMD calls for carefully conducted safety evaluations of security systems before they are deployed.

Possible overexposure of pregnant women to emissions from a walk through metal detector

NASA Astrophysics Data System (ADS)

Wu, Dagang; Qiang, Rui; Chen, Ji; Seidman, Seth; Witters, Donald; Kainz, Wolfgang

2007-09-01

This paper presents a systematic procedure to evaluate the induced current densities and electric fields due to walk-through metal detector (WTMD) exposure. This procedure is then used to assess the exposure of nine pregnant women models exposed to one WTMD model. First, we measured the magnetic field generated by the WTMD, then we extracted the equivalent current source to represent the WTMD emissions and finally we calculated the induced current densities and electric fields using the impedance method. The WTMD emissions and the induced fields in the pregnant women and fetus models are then compared to the ICNIRP Guidelines and the IEEE C95.6 exposure safety standard. The results prove the consistency between maximum permissible exposure (MPE) levels and basic restrictions for the ICNIRP Guidelines and IEEE C95.6. We also found that this particular WTMD complies with the ICNIRP basic restrictions for month 1-5 models, but leads to both fetus and pregnant women overexposure for month 6-9 models. The IEEE C95.6 restrictions (MPEs and basic restrictions) are not exceeded. The fetus overexposure of this particular WTMD calls for carefully conducted safety evaluations of security systems before they are deployed.

A concept for improved fire-safety through coated fillers

NASA Technical Reports Server (NTRS)

Ramohalli, K.

1977-01-01

A possible method is examined for obtaining a high value of thermal conductivity before ignition and a low value after ignition in standard composite materials. The idea is to coat fiberglass, alumina trihydrate, and similar fillers with specially selected chemicals prior to using polymer resins. The amount of the coat constitutes typically less than 5% of the material's total weight. The experimental results obtained are consistent with the basic concept.

[Application of classified protection of information security in the information system of air pollution and health impact monitoring].

PubMed

Hao, Shuxin; Lü, Yiran; Liu, Jie; Liu, Yue; Xu, Dongqun

2018-01-01

To study the application of classified protection of information security in the information system of air pollution and health impact monitoring, so as to solve the possible safety risk of the information system. According to the relevant national standards and requirements for the information system security classified protection, and the professional characteristics of the information system, to design and implement the security architecture of information system, also to determine the protection level of information system. Basic security measures for the information system were developed in the technical safety and management safety aspects according to the protection levels, which effectively prevented the security risk of the information system. The information system established relatively complete information security protection measures, to enhanced the security of professional information and system service, and to ensure the safety of air pollution and health impact monitoring project carried out smoothly.

[Improvement of sanitary and epidemiological safety of rail transport--a requirement of the new legislation of the Russian Federation].

PubMed

2012-01-01

Brief analysis of the legal framework in recent years, both in the sphere of technical regulation, and in the field of sanitary and epidemiological welfare of the population is presented in this article. The necessity of inclusion in the technical regulations for the safety of railway rolling stock and elements of railway infrastructure the requirements for sanitary-epidemiological safety and hygiene regulations has been proved. Fragments of technical regulations for railway equipment and infrastructure elements, including the basic requirements for the sanitary-epidemiological security are presented. The position of authors in the processing of the regulatory framework in the field of sanitary-epidemiological welfare of population in standardization documents in accordance with the requirements of federal law "On technical regulation" has been reflected.

Controlling hazardous energy sources (lockout/tagout)

NASA Technical Reports Server (NTRS)

Dominguez, Manuel B.

1991-01-01

The minimum requirements as established by the Occupational Safety and Health Administration (OSHA) standard 29 CFR 1910.147 are discussed for preventing the unexpected operation of equipment or release of energy which could cause injury to personnel, damage to equipment, harm to the environment, or loss or compromise of test data. Safety requirements both for government and contractor personnel are explained for potentially hazardous energy sources during work operations at LeRC (Cleveland and Plum Brook Stations). Basic rules are presented to ensure protection against harmful exposures, and baseline implementation requirements are discussed from which detailed lockout/tagout procedures can be developed for individual equipment items. Examples of energy sources covered by this document include electrical, pneumatic, mechanical, chemical, cryogenic, thermal, spring tension/compression suspended or moving loads, and other potentially hazardous sources. Activities covered by this standard include, but are not limited to, construction, maintenance, installation, calibration, inspection, cleaning, or repair.

Controlling hazardous energy sources (lockout/tagout)

NASA Astrophysics Data System (ADS)

Dominguez, Manuel B.

1991-10-01

The minimum requirements as established by the Occupational Safety and Health Administration (OSHA) standard 29 CFR 1910.147 are discussed for preventing the unexpected operation of equipment or release of energy which could cause injury to personnel, damage to equipment, harm to the environment, or loss or compromise of test data. Safety requirements both for government and contractor personnel are explained for potentially hazardous energy sources during work operations at LeRC (Cleveland and Plum Brook Stations). Basic rules are presented to ensure protection against harmful exposures, and baseline implementation requirements are discussed from which detailed lockout/tagout procedures can be developed for individual equipment items. Examples of energy sources covered by this document include electrical, pneumatic, mechanical, chemical, cryogenic, thermal, spring tension/compression suspended or moving loads, and other potentially hazardous sources. Activities covered by this standard include, but are not limited to, construction, maintenance, installation, calibration, inspection, cleaning, or repair.

Basic and Morphological Properties of Bukit Goh Bauxite

NASA Astrophysics Data System (ADS)

Hasan, Muzamir; Nor Azmi, Ahmad Amirul Faez Ahmad; Tam, Weng Long; Phang, Biao Yu; Azizul Moqsud, M.

2018-03-01

Investigation conducted by International Maritime Organization (IMO) concluded that the loss of the Bulk Jupiter that carrying bauxite from Kuantan has uncovered evidence to suggest liquefaction led to loss of stability. This research analysed Bukit Goh bauxite and comparison was made with International Maritime Solid Bulk Cargoes (IMSBC Code) standard. To analyse these characteristics of the bauxite, four samples were selected at Bukit Goh, Kuantan ; two of the samples from the Bukit Goh mine and two samples from the stock piles were tested to identify the bauxite basic and morphological properties by referring to GEOSPEC 3 : Model Specification for Soil Testing ; particle size distribution, moisture content and specific gravity and its morphological properties. Laboratory tests involved including Hydrometer test, Small Pycnometer test, Dry Sieve test and Field Emission Scanning Electron Microscop (FESEM) test. The results show that the average moisture content of raw Bukit Goh bauxite is 20.64% which exceeded the recomended value of maximum 10%. Average fine material for raw bauxite is 37.75% which should not be greater than 30% per IMSBC standard. By that, the bauxite from Bukit Goh mine do not achieved the minimum requirements and standards of the IMSBC standard and need to undergo beneficiation process for better quality and safety.

Challenges in Developing Competency-based Training Curriculum for Food Safety Regulators in India

PubMed Central

Thippaiah, Anitha; Allagh, Komal Preet; Murthy, G. V.

2014-01-01

Context: The Food Safety and Standards Act have redefined the roles and responsibilities of food regulatory workforce and calls for highly skilled human resources as it involves complex management procedures. Aims: 1) Identify the competencies needed among the food regulatory workforce in India. 2) Develop a competency-based training curriculum for food safety regulators in the country. 3) Develop training materials for use to train the food regulatory workforce. Settings and Design: The Indian Institute of Public Health, Hyderabad, led the development of training curriculum on food safety with technical assistance from the Royal Society for Public Health, UK and the National Institute of Nutrition, India. The exercise was to facilitate the implementation of new Act by undertaking capacity building through a comprehensive training program. Materials and Methods: A competency-based training needs assessment was conducted before undertaking the development of the training materials. Results: The training program for Food Safety Officers was designed to comprise of five modules to include: Food science and technology, Food safety management systems, Food safety legislation, Enforcement of food safety regulations, and Administrative functions. Each module has a facilitator guide for the tutor and a handbook for the participant. Essentials of Food Hygiene-I (Basic level), II and III (Retail/ Catering/ Manufacturing) were primarily designed for training of food handlers and are part of essential reading for food safety regulators. Conclusion: The Food Safety and Standards Act calls for highly skilled human resources as it involves complex management procedures. Despite having developed a comprehensive competency-based training curriculum by joint efforts by the local, national, and international agencies, implementation remains a challenge in resource-limited setting. PMID:25136155

[Research progress on breeding standard of medicinal animals and discussion on several key problems].

PubMed

Zhou, Yi-Quan; Qu, Xian-You; Yang, Guang; Li, Jun-de; Su, Yan; Li, Ying

2016-12-01

Medicinal animal breeding standards is regarded as the law to normalize relevant production that can guarantee the quality of traditional Chinese medicine of animal category. The article summarized the medicinal animal resources in our country and the present condition of medicinal animal breeding standards. It considered the current animal breeding standards system was in adequate, not only the quantity of breeding standards, the standard content and index were also uncomprehensive, which is not conducive to the scientific and orderly development and utilization of medicinal animal resources. The article pointed out that the development of the basic standards, environmental control, feed quality, raising management, inspection and quarantine should be included into the medicinal animal breeding standards, and the medicinal animal breeding standards content framework was introduced. Meanwhile, animal welfare, biological safety and file management should be concerned during the process of research. Hope the article has good reference value to medicinal animal breeding standards establishment and production management. Copyright© by the Chinese Pharmaceutical Association.

Integrating system safety into the basic systems engineering process

NASA Technical Reports Server (NTRS)

Griswold, J. W.

1971-01-01

The basic elements of a systems engineering process are given along with a detailed description of what the safety system requires from the systems engineering process. Also discussed is the safety that the system provides to other subfunctions of systems engineering.

Safety on the Job. Some Guidelines for Working Safely. Instructor's Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This teacher's guide was developed to help teachers (especially in Oklahoma) promote safe practices on the job. As a supplement to existing programs in the requirements for job safety, this book can also promote same basic safety attitudes and help support basic safety concepts, with an emphasis on accident prevention. The guide contains eight…

Agricultural health and safety: incorporating the worker perspective.

PubMed

Liebman, Amy K; Augustave, Wilson

2010-07-01

This commentary offers a worker's perspective on agricultural health and safety and describes (1) the historical exemption of agriculture from regulatory oversight and barriers encountered due to lack of regulations and poor enforcement of the existing standards; (2) the effect of immigration status on worker protections; and (3) the basic desire for economic survival and how this impacts worker health and safety. The commentary describes two models to reduce hazards at work that illustrate how workers' perspectives can be incorporated successfully at the policy level and during the intervention development process and puts forth recommendations for employers, researchers, and funding agencies to facilitate the integration of workers' perspectives into occupational health and safety in agriculture. Ultimately, improved worker protection requires systemic policy and regulatory changes as well as strong enforcement of existing regulations. This commentary summarizes the presentation, "Ground View: Perspectives of Hired Workers," at the Agricultural Safety and Health Council of America/National Institute for Occupational Safety and Health conference, "Be Safe, Be Profitable: Protecting Workers in Agriculture," January 27-28, 2010, Dallas/Fort Worth, Texas.

Reducing the risks from radon indoors: an IAEA perspective.

PubMed

Boal, T; Colgan, P A

2014-07-01

The IAEA has a mandate to develop, in collaboration with other relevant international organisations, 'standards of safety for protection of health and minimisation of danger to life and property', and to provide for the application of these standards. The most recent edition of the International Basic Safety Standards includes, for the first time, requirements to protect the public from exposure due to radon indoors. As a result, the IAEA has already developed guidance material in line with accepted best international practice and an international programme to assist its Member States in identifying and addressing high radon concentrations in buildings is being prepared. This paper overviews the current situation around the world and summarises the management approach advocated by the IAEA. A number of important scientific and policy issues are identified and discussed from the point-of-view of how they may impact on national action plans and strategies. Finally, the assistance and support available through the Agency is described. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Medical physics in Europe following recommendations of the International Atomic Energy Agency.

PubMed

Casar, Bozidar; Lopes, Maria do Carmo; Drljević, Advan; Gershkevitsh, Eduard; Pesznyak, Csilla

2016-03-01

Medical physics is a health profession where principles of applied physics are mostly directed towards the application of ionizing radiation in medicine. The key role of the medical physics expert in safe and effective use of ionizing radiation in medicine was widely recognized in recent European reference documents like the European Union Council Directive 2013/59/EURATOM (2014), and European Commission Radiation Protection No. 174, European Guidelines on Medical Physics Expert (2014). Also the International Atomic Energy Agency (IAEA) has been outspoken in supporting and fostering the status of medical physics in radiation medicine through multiple initiatives as technical and cooperation projects and important documents like IAEA Human Health Series No. 25, Roles and Responsibilities, and Education and Training Requirements for Clinically Qualified Medical Physicists (2013) and the International Basic Safety Standards, General Safety Requirements Part 3 (2014). The significance of these documents and the recognition of the present insufficient fulfilment of the requirements and recommendations in many European countries have led the IAEA to organize in 2015 the Regional Meeting on Medical Physics in Europe, where major issues in medical physics in Europe were discussed. Most important outcomes of the meeting were the recommendations addressed to European member states and the survey on medical physics status in Europe conducted by the IAEA and European Federation of Organizations for Medical Physics. Published recommendations of IAEA Regional Meeting on Medical Physics in Europe shall be followed and enforced in all European states. Appropriate qualification framework including education, clinical specialization, certification and registration of medical physicists shall be established and international recommendation regarding staffing levels in the field of medical physics shall be fulfilled in particular. European states have clear legal and moral responsibility to effectively transpose Basic Safety Standards into national legislation in order to ensure high quality and safety in patient healthcare.

Medical physics in Europe following recommendations of the International Atomic Energy Agency

PubMed Central

Lopes, Maria do Carmo; Drljević, Advan; Gershkevitsh, Eduard; Pesznyak, Csilla

2016-01-01

Background Medical physics is a health profession where principles of applied physics are mostly directed towards the application of ionizing radiation in medicine. The key role of the medical physics expert in safe and effective use of ionizing radiation in medicine was widely recognized in recent European reference documents like the European Union Council Directive 2013/59/EURATOM (2014), and European Commission Radiation Protection No. 174, European Guidelines on Medical Physics Expert (2014). Also the International Atomic Energy Agency (IAEA) has been outspoken in supporting and fostering the status of medical physics in radiation medicine through multiple initiatives as technical and cooperation projects and important documents like IAEA Human Health Series No. 25, Roles and Responsibilities, and Education and Training Requirements for Clinically Qualified Medical Physicists (2013) and the International Basic Safety Standards, General Safety Requirements Part 3 (2014). The significance of these documents and the recognition of the present insufficient fulfilment of the requirements and recommendations in many European countries have led the IAEA to organize in 2015 the Regional Meeting on Medical Physics in Europe, where major issues in medical physics in Europe were discussed. Most important outcomes of the meeting were the recommendations addressed to European member states and the survey on medical physics status in Europe conducted by the IAEA and European Federation of Organizations for Medical Physics. Conclusions Published recommendations of IAEA Regional Meeting on Medical Physics in Europe shall be followed and enforced in all European states. Appropriate qualification framework including education, clinical specialization, certification and registration of medical physicists shall be established and international recommendation regarding staffing levels in the field of medical physics shall be fulfilled in particular. European states have clear legal and moral responsibility to effectively transpose Basic Safety Standards into national legislation in order to ensure high quality and safety in patient healthcare. PMID:27069451

A simple tool for preliminary hazard identification and quick assessment in craftwork and small/medium enterprises (SME).

PubMed

Colombini, Daniela; Occhipinti, E; Di Leone, G

2012-01-01

During the last Congress of the International Ergonomics Association (IEA), Beijing, August 2009, an international group was founded aimed at developing a "toolkit for MSD prevention" within IEA and in collaboration with World Health Organization (WHO). Possible users of toolkits are: members of health and safety committees, health and safety representatives, line supervisors; labor inspectors; health workers implementing basic occupational health services; occupational health and safety specialists.According to ISO standard 11228 series and the new Draft CD ISO 12259-2009: Application document guides for the potential user, a computer software ( in Excel®) was create dealing with hazard "mapping" in handicraft The proposed methodology, using specific key enters and quick assessment criteria, allows a simple ergonomics hazard identification and risk estimation. Thus it makes possible to decide for which professional hazards a more exhaustive risk assessment will be necessary and which professional consultant should be involved (occupational physician, safety engineer, industrial hygienist, etc.).

Assessing safety of herbal products for menopausal complaints: an international perspective.

PubMed

Dog, Tieraona Low; Marles, Robin; Mahady, Gail; Gardiner, Paula; Ko, Richard; Barnes, Jo; Chavez, Mary L; Griffiths, James; Giancaspro, Gabriel; Sarma, Nandakumara D

2010-08-01

Future research of herbal products for menopausal women should include long-term safety assessments because women may use these products for prolonged periods of time. Growing numbers of women take prescription medications and concurrently use herbal products for alleviation of menopausal symptoms. Because of possible herb-drug interactions, both drug and supplement manufacturers should provide basic pharmacokinetic data to reduce the risk of adverse interactions. In addition, herbal products produced to high quality standards are essential for ensuring consumer safety. Regulatory frameworks must be in place to ensure that herbal ingredients' identities have been verified, that they have been properly quantified per unit dose, that the product is within tolerance limits for contaminants, that the product's safety and effectiveness under the recommended conditions of use have been assessed before sale to the public, and that a system is in place to detect and deal with adverse reactions when they arise. This article explores these and related concerns. Copyright 2010. Published by Elsevier Ireland Ltd.

Preventing Burns in Your Home

MedlinePlus

... Plans Nutrients and Nutritional Info Sugar and Sugar Substitutes Exercise and Fitness Exercise Basics Sports Safety Injury ... Plans Nutrients and Nutritional Info Sugar and Sugar Substitutes Exercise and Fitness Exercise Basics Sports Safety Injury ...

Instrumental variable methods in comparative safety and effectiveness research.

PubMed

Brookhart, M Alan; Rassen, Jeremy A; Schneeweiss, Sebastian

2010-06-01

Instrumental variable (IV) methods have been proposed as a potential approach to the common problem of uncontrolled confounding in comparative studies of medical interventions, but IV methods are unfamiliar to many researchers. The goal of this article is to provide a non-technical, practical introduction to IV methods for comparative safety and effectiveness research. We outline the principles and basic assumptions necessary for valid IV estimation, discuss how to interpret the results of an IV study, provide a review of instruments that have been used in comparative effectiveness research, and suggest some minimal reporting standards for an IV analysis. Finally, we offer our perspective of the role of IV estimation vis-à-vis more traditional approaches based on statistical modeling of the exposure or outcome. We anticipate that IV methods will be often underpowered for drug safety studies of very rare outcomes, but may be potentially useful in studies of intended effects where uncontrolled confounding may be substantial.

Propulsion Test Handbook: MSFC and SSC. Draft 01

NASA Technical Reports Server (NTRS)

Hammond, John M.

2010-01-01

This Handbook was prepared to provide Propulsion Test Personnel a central source of fundamental reference material. The Testing Process, which is a three-part process of pre-test activities, testing, and post-test activities, involves a collaborative effort from the mechanical, electrical, safety, and environmental disciplines in the test environment. Pre-test activities, testing, and post-test activities processes will vary, per test requirements; however, the content of this Handbook should cover basic procedures and standards that are shared across Centers.

Behavioral Health Program Element

NASA Technical Reports Server (NTRS)

Leveton, Lauren B.

2006-01-01

The project goal is to develop behavioral health prevention and maintenance system for continued crew health, safety, and performance for exploration missions. The basic scope includes a) Operationally-relevant research related to clinical cognitive and behavioral health of crewmembers; b) Ground-based studies using analog environments (Antarctic, NEEMO, simulations, and other testbeds; c) ISS studies (ISSMP) focusing on operational issues related to behavioral health outcomes and standards; d) Technology development activities for monitoring and diagnostic tools; and e) Cross-disciplinary research (e.g., human factors and habitability research, skeletal muscle, radiation).

Field manual for the collection of Navajo Nation streamflow-gage data

USGS Publications Warehouse

Hart, Robert J.; Fisk, Gregory G.

2014-01-01

The Field Manual for the Collection of Navajo Nation Streamflow-Gage Data (Navajo Field Manual) is based on established (standard) U.S. Geological Survey streamflow-gaging methods and provides guidelines specifically designed for the Navajo Department of Water Resources personnel who establish and maintain streamflow gages. The Navajo Field Manual addresses field visits, including essential field equipment and the selection of and routine visits to streamflow-gaging stations, examines surveying methods for determining peak flows (indirect measurements), discusses safety considerations, and defines basic terms.

Do European hospitals have quality and safety governance systems and structures in place?

PubMed

Shaw, C; Kutryba, B; Crisp, H; Vallejo, P; Suñol, R

2009-02-01

Internal systems for quality and safety were assessed in 89 hospitals in six European states, by external teams using standardised criteria and procedures, as part of the Methods of Assessing Response to Quality Improvement Strategies (MARQuIS) project. The assessments were made primarily to identify the current use of quality management systems in the sample hospitals, and also to demonstrate a potential tool for comparable assessment of hospitals in general. The large majority of the hospitals had a formal, documented infrastructure to manage quality and safety, but a significant minority had no designated mission, programme or coordination. In two-thirds of hospitals, the governing body was active in defining policy and programmes for improvement, and received reports on quality, safety and patient satisfaction at least once a year. The brief on-site assessments identified systematic variations, within and between countries, in structures and processes of governance and to document the uptake of best practice. Unacceptable variations in practice could be reduced, to the benefit of consumers and providers, by developing and publishing basic organisational standards relevant to all European states. The simple assessment criteria designed for this project could be developed into a practical tool for self-assessment, peer review or benchmarking of hospitals across national borders. This assessment, combined with explicit, relevant and achievable standards, could provide a vehicle to promote the voluntary uptake of best practice and consistency in quality and safety among hospitals in Europe.

[Food Security in Europe: comparison between the "Hygiene Package" and the British Retail Consortium (BRC) & International Food Standard (IFS) protocols].

PubMed

Stilo, A; Parisi, S; Delia, S; Anastasi, F; Bruno, G; Laganà, P

2009-01-01

The birth of Hygiene Package and of the Reg. CE no 2073/2005 in the food production field signalled a change in Italy. This process started in Italy in 1997 with the legislative decree no 155 on Self-control but in reality, it was implemented in the UK in 1990 with the promulgation of the Food Safety Act. This legal act was influenced by some basic rules corresponding to the application of HACCP standards. Since 1990 the British chains of distribution (Retailers) have involved all aspects of the food line in this type of responsibility. Due to this growing awareness for a need for greater regulation, a protocol, edited by British Retail Consortium was created in 1998. This protocol acted as a "stamp" of approval for food products and it is now known as the BRC Global Food Standard. In July 2008, this protocol became effective in its fifth version. After the birth of BRC, also French and German Retailers have established a standard practically equivalent and perhaps more pertinent to safety food, that is International Food Standard (IFS). The new approach is specific to the food field and strictly applies criteria which will ensure "safety, quality and legality" of food products, similarly to ISO 22000:2005 (mainly based on BRC & IFS past experiences). New standards aim to create a sort of green list with fully "proper and fit" Suppliers only, because of comprehensible exigencies of Retailers. It is expected, as we have shown, that Auditor authorities who are responsible for ensuring that inspections are now carried out like the Hygiene Package, will find these new standards useful. The advantages of streamlining this system is that it will allow enterprises to diligently enforce food safety practices without fear of upset or legal consequence, to improve the quality (HACCP) of management & traceability system; to restrict wastes, reprocessing and withdrawal of products. However some discordances about the interpretation of certain sub-field norms (e.g., water management) are evident and should be carefully discussed once more.

Toy Age-Labeling: An Overview for Pediatricians of How Toys Receive Their Age Safety and Developmental Designations.

PubMed

Kulak, Shuli; Stein, Ruth E K

2016-07-01

Injuries related to toys continue to cause significant childhood morbidity and mortality, despite considerable government regulation of the toy industry. Recent controversy related to toys that contain strong magnets demonstrate the dangers they pose to children. The pediatric community is often unaware of how toys receive their developmental and safety labeling and the degree to which age-labeling on toys can be discretionary. Toy labeling has 2 basic manifestations. The first, safety labeling for hazards like small parts, balloons, or small balls that may present a choking risk, is mandatory. The second, "developmental" age-labeling, describes the age of the children for which the toy is intended, and sometimes has discretionary components. This article provides a review of the regulations governing toy age-safety standards and how they are reflected on toy packaging to help pediatric practitioners apply safety advice across settings and patient characteristics. We review the existing age-labeling regulations and processes and discuss the major areas where children remain vulnerable despite labeling. Finally, we list some recommendations for counseling parents about toy safety. Copyright © 2016 by the American Academy of Pediatrics.

Laminar-airflow equipment certification: what the pharmacist needs to know.

PubMed

Bryan, D; Marback, R C

1984-07-01

The basic information pharmacy practitioners need to determine the suitability and applicability of laminar-airflow equipment test standards and procedures is presented. The operative guideline for any laminar-flow clean bench (LFCB) certification is the cleanroom and work station requirements for controlled environments as defined by the federal government under Federal Standard 209b (FS 209b). FS 209b outlines the tests, test procedures, and acceptable performance ranges for all LFCB equipment. National Sanitation Foundation Standard Number 49 (NSF 49) is used in the certification of biological-safety cabinets (BSCs). NSF 49 covers those aspects of safety, maintenance, performance, and testing that are unique BSCs. To monitor certification properly, practitioners should be familiar with these standards and the air-velocity profile, high-efficiency particulate air filter performance, noise output, light, and electrical test procedures. A review of the requisite knowledge, experience, and reputation of certifying agents is presented, along with an outline of all the necessary procedures, equipment, and documentation to be used in the process. A thorough test report should be issued upon unit certification. As pharmacy practitioners are responsible for all other aspects of quality assurance, they should also be capable of auditing these certifications to ensure the aseptic quality of products compounded in the laminar-airflow environment.

Protection of Workers and Third Parties during the Construction of Linear Structures

NASA Astrophysics Data System (ADS)

Vlčková, Jitka; Venkrbec, Václav; Henková, Svatava; Chromý, Adam

2017-12-01

The minimization of risk in the workplace through a focus on occupational health and safety (OHS) is one of the primary objectives for every construction project. The most serious accidents in the construction industry occur during work on earthworks and linear structures. The character of such structures places them among those posing the greatest threat to the public (referred to as “third parties”). They can be characterized as large structures whose construction may involve the building site extending in a narrow lane alongside previously constructed objects currently in use by the public. Linear structures are often directly connected to existing objects or buildings, making it impossible to guard the whole construction site. However, many OHS problems related to linear structures can be prevented during the design stage. The aim of this article is to introduce a new methodology which has been implemented into a computer program that deals with safety measures at construction sites where work is performed on linear structures. Based on existing experience with the design of such structures and their execution and supervision by safety coordinators, the basic types of linear structures, their location in the terrain, the conditions present during their execution and other marginal conditions and influences were modelled. Basic safety information has been assigned to this elementary information, which is strictly necessary for the construction process. The safety provisions can be grouped according to type, e.g. technical, organizational and other necessary documentation, or into sets of provisions concerning areas such as construction site safety, transport safety, earthworks safety, etc. The selection of the given provisions takes place using multiple criteria. The aim of creating this program is to provide a practical tool for designers, contractors and construction companies. The model can contribute to the sufficient awareness of these participants about technical and organizational provisions that can help them to meet workplace safety requirements. The software for the selection of safety provisions also contains module that can calculate necessary cost estimates using a calculation formula chosen by the user. All software data conform to European standards harmonized for the Czech Republic.

Original and creative stereoscopic film making

NASA Astrophysics Data System (ADS)

Criado, Enrique

2008-02-01

The stereoscopic cinema has become, once again, a hot topic in the film production. For filmmakers to be successful in this field, a technical background in the principles of binocular perception and how our brain interprets the incoming data from our eyes, are fundamental. It is also paramount for a stereoscopic production to adhere certain rules for comfort and safety. There is an immense variety of options in the art of standard "flat" photography, and the possibilities only can be multiply with the stereo. The stereoscopic imaging has its own unique areas for subjective, original and creative control that allow an incredible range of possible combinations by working inside the standards, and in some cases on the boundaries of the basic stereo rules. The stereoscopic imaging can be approached in a "flat" manner, like channeling sound through an audio equalizer with all the bands at the same level. It can provide a realistic perception, which in many cases can be sufficient, thanks to the rock-solid viewing inherent to the stereoscopic image, but there are many more possibilities. This document describes some of the basic operating parameters and concepts for stereoscopic imaging, but it also offers ideas for a creative process based on the variation and combination of these basic parameters, which can lead into a truly innovative and original viewing experience.

Shift in performance of food safety management systems in supply chains: case of green bean chain in Kenya versus hot pepper chain in Uganda.

PubMed

Nanyunja, Jessica; Jacxsens, Liesbeth; Kirezieva, Klementina; Kaaya, Archileo N; Uyttendaele, Mieke; Luning, Pieternel A

2016-08-01

This study investigates the level of design and operation of food safety management systems (FSMS) of farmers and export traders in Kenya and Uganda. FSMS diagnostic tools developed for the fresh produce chain were used to assess the levels of context riskiness, FSMS activities and system output in primary production (n = 60) and trade (n = 60). High-risk context characteristics combined with basic FSMS are expected to increase the risk on unsafe produce. In Uganda both farmers and export traders of hot peppers operate in a high- to moderate-risk context but have basic FSMS and low systems output. In Kenya, both farmers and export traders of green beans operate in a low- to moderate-risk context. The farmers have average performing FSMS, whereas export trade companies showed more advanced FSMS and system output scores ranging from satisfactory to good. Large retailers supplying the EU premium market play a crucial role in demanding compliance with strict voluntary food safety standards, which was reflected in the more advanced FSMS and good system output in Kenya, especially traders. In Kenya, a clear shift in more fit-for-purpose FSMS and higher system output was noticed between farms and trade companies. In the case of Uganda, traders commonly supply to the less demanding EU wholesale markets such as ethnic specialty shops. They only have to comply with the legal phytosanitary and pesticide residue requirements for export activities, which apparently resulted in basic FSMS and low system output present with both farmers and traders. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Fire safety design of a mobile quarantine facility

NASA Technical Reports Server (NTRS)

Bass, R. S.; Hirasaki, J. K.

1971-01-01

During the design phase of the Mobile Quarantine Facility (MQF), a primary consideration was fire safety. Therefore, appropriate criteria and ground rules were used in the design and construction of the facility. The fire codes and fire-requirement listings that are used by commerical airlines were supplied to the Manned Spacecraft Center (MSC) by the Federal Aviation Agency (FAA). After these codes were reviewed, a basic ground rule was adopted that flame protection for all combustible materials should be at least equivalent to or better than the standards for commercial aircraft. Because the MQF was designed to operate with an interior atmosphere of air rather than with an oxygen-enriched atmosphere such as that of the Apollo spacecraft cabin, the requirements for MQF material were not as stringent as those for the spacecraft.

[A preliminary mapping methodology for occupational hazards and biomechanical risk evaluation: presentation of a simple, computerized tool kit for ergonomic hazards identification and risk assessment].

PubMed

Colombini, Daniela; Occhipinti, E; Di Leone, G

2011-01-01

During the last Congress of the International Ergonomics Association (IEA), Beijing, August 2009, an international group was founded with the task of developing a "toolkit for MSD prevention" under the IEA and in collaboration with the World Health Organization. The possible users of toolkits are: members of health and safety committees; health and safety representatives; line supervisors; foremen; workers; government representatives; health workers providing basic occupational health services; occupational health and safety specialists. According to the ISO standard 11228 series and the new Draft CD ISO 12259-2009: Application document guides for the potential user, our group developed a preliminary "mapping" methodology of occupational hazards in the craft industry, supported by software (Excel). The proposed methodology, using specific key enters and quick assessment criteria, allows a simple ergonomics hazards identification and risk estimation to be made. It is thus possible to decide for which occupational hazards a more exhaustive risk assessment will be necessary and which occupational consultant should be involved (occupational physician, safety engineer, industrial hygienist, etc.).

Safety for the Elementary Grades: A Multimedia Roundup.

ERIC Educational Resources Information Center

Mandell, Phyllis Levy; Rosenthal, Shiri

1980-01-01

Presents abstracts of films and cassettes for the elementary school dealing with basic safety, bicycle safety, electrical safety, emergencies and how to deal with them, fire and holiday safety, playground safety, poisons, school and bus safety, signs and signals, skateboard and water safety. (CS)

Basic Wind Tech Course - Lesson Plans and Activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swapp, Andy

2011-07-01

The funds from this project were used to purchase tools and instrumentation to help replicate actual on-the-job wind energy scenarios which provided the students with the practical or applied components of wind energy jobs. This project enhanced the educational experiences provided for the students in terms of engineering and science components of wind energy by using electronics, control systems, and electro-mechanical instrumentation to help students learn standardized wind-specific craftsman skills. In addition the tools and instrumentation helped the students learn the safety necessary to work in the wind industry.

Biomedical Simulation: Evolution, Concepts, Challenges and Future Trends.

PubMed

Sá-Couto, Carla; Patrão, Luís; Maio-Matos, Francisco; Pêgo, José Miguel

2016-12-30

Biomedical simulation is an effective educational complement for healthcare training, both at undergraduate and postgraduate level. It enables knowledge, skills and attitudes to be acquired in a safe, educationally orientated and efficient manner. In this context, simulation provides skills and experience that facilitate the transfer of cognitive, psychomotor and proper communication competences, thus changing behavior and attitudes, and ultimately improving patient safety. Beyond the impact on individual and team performance, simulation provides an opportunity to study organizational failures and improve system performance. Over the last decades, simulation in healthcare had a slow but steady growth, with a visible maturation in the last ten years. The simulation community must continue to provide the core leadership in developing standards. There is a need for strategies and policy development to ensure its coordinated and cost-effective implementation, applied to patient safety. This paper reviews the evolutionary movements of biomedical simulation, including a review of the Portuguese initiatives and nationwide programs. For leveling knowledge and standardize terminology, basic but essential concepts in clinical simulation, together with some considerations on assessment, validation and reliability are presented. The final sections discuss the current challenges and future initiatives and strategies, crucial for the integration of simulation programs in the greater movement toward patient safety.

Assessing the status of food safety management systems for fresh produce production in East Africa: evidence from certified green bean farms in Kenya and noncertified hot pepper farms in Uganda.

PubMed

Nanyunja, J; Jacxsens, L; Kirezieva, K; Kaaya, A N; Uyttendaele, M; Luning, P A

2015-06-01

The farms of fresh produce farmers are major sources of food contamination by microbiological organisms and chemical pesticides. In view of their choice for farming practices, producers are influenced by food safety requirements. This study analyzes the role of food safety standard certification toward the maturity of food safety management systems (FSMS) in the primary production of fresh produce. Kenya and Uganda are two East African countries that export green beans and hot peppers, respectively, to the European Union but have contrasting features in terms of agricultural practices and certification status. In the fresh produce chain, a diagnostic instrument for primary production was used to assess context factors, core control and assurance activities, and system output to measure the performance of FSMS for certified green bean farms in Kenya and noncertified hot pepper farms in Uganda. Overall, our findings show that in Uganda, noncertified hot pepper farms revealed only a "basic level of control and assurance" activities in their FSMS, which was not satisfactory, because no insight into potential pesticide microbial contamination was presented by these farmers. On the other hand, certified green bean farms in Kenya had an "average level of control and assurance," providing insight into the delivered food safety and quality by the farmers. Farm size did not impact the maturity level of FSMS. This study confirms the role played by food safety standard certification toward the maturity of FSMS implemented in developing countries and demonstrates the possibility of Ugandan farms to upgrade agricultural practices in the fresh produce sector.

[Working hypothesis of simplified techniques for the first mapping of occupational hazards in handicraft. First part: ergonomics hazards].

PubMed

Colombini, D; Di Leone, G; Occhipinti, E; Montomoli, L; Ruschioni, A; Giambartolomei, M; Ardissone, S; Fanti, M; Pressiani, S; Placci, M; Cerbai, M; Preite, S

2009-01-01

During the last Congress of the International Ergonomics Association (IEA), Beijing - China August 2009, in collaboration with World Health Organization an international group for developing a "toolkit for MSD prevention" was founded. Possible users of toolkits are: members of a health and safety committee; health and safety representatives; line supervisors; foremen; workers; government representatives; health workers implementing basic occupational health services; occupational health and safety specialists. According with ISO standard 11228 series and their ISO Application document for the Key enters and Quick Assessment (green/red conditions), our group developed a first mapping methodology of occupational hazards in handicraft, working with the support of the information technology (Excel). This methodology, utilizing specific key enters and quick evaluation, allows a simple risk estimation. So it is possible to decide for which occupational hazards will be necessary an exhaustive assessment and to which professional consultant it is better to direct them to (worker's doctor, engineer, chemical, etc.).

Instrumental variable methods in comparative safety and effectiveness research†

PubMed Central

Brookhart, M. Alan; Rassen, Jeremy A.; Schneeweiss, Sebastian

2010-01-01

Summary Instrumental variable (IV) methods have been proposed as a potential approach to the common problem of uncontrolled confounding in comparative studies of medical interventions, but IV methods are unfamiliar to many researchers. The goal of this article is to provide a non-technical, practical introduction to IV methods for comparative safety and effectiveness research. We outline the principles and basic assumptions necessary for valid IV estimation, discuss how to interpret the results of an IV study, provide a review of instruments that have been used in comparative effectiveness research, and suggest some minimal reporting standards for an IV analysis. Finally, we offer our perspective of the role of IV estimation vis-à-vis more traditional approaches based on statistical modeling of the exposure or outcome. We anticipate that IV methods will be often underpowered for drug safety studies of very rare outcomes, but may be potentially useful in studies of intended effects where uncontrolled confounding may be substantial. PMID:20354968

Pediatric emergency and essential surgical care in Zambian hospitals: a nationwide study.

PubMed

Bowman, Kendra G; Jovic, Goran; Rangel, Shawn; Berry, William R; Gawande, Atul A

2013-06-01

Pediatric surgical care in developing countries is not well studied. We sought to identify the range of pediatric surgery available, the barriers to provision, and level of safety of surgery performed for the entire pediatric population in Zambia. In cooperation with the Ministry of Health, we validated and adapted a World Health Organization instrument. During onsite visits, the availability of 32 emergency and essential surgical procedures relevant to children was surveyed. The availability of basic World Health Organization surgical safety criteria was determined. A single interviewer visited 103 (95%) of 108 surgical hospitals in Zambia and carried out 495 interviews. An average of 68% of the 32 emergency and essential surgical procedures was available (range 32%-100%). Lack of surgical skill was the primary reason for referral in 72% of procedure types, compared with 24%, 2% and 3% due to lack of equipment, supplies and anesthesia skills, respectively (p<0.001). Minimum pediatric surgical safety criteria were met by 14% of hospitals. The primary limitation to providing pediatric surgical care in Zambia is lack of surgical skills. Minimum safety standards were met by 14% of hospitals. Efforts to improve pediatric surgery should prioritize teaching surgical skills to expand access and providing safety training, equipment and supplies to increase safety. Copyright © 2013 Elsevier Inc. All rights reserved.

Fluid-flow-rate metrology: laboratory uncertainties and traceabilities

NASA Astrophysics Data System (ADS)

Mattingly, G. E.

1991-03-01

Increased concerns for improved fluid flowrate measurement are driving the fluid metering community-meter manufacturers and users alike-to search for better verification and documentation for their fluid measurements. These concerns affect both our domestic and international market places they permeate our technologies - aerospace chemical processes automotive bioengineering etc. They involve public health and safety and they impact our national defense. These concerns are based upon the rising value of fluid resources and products and the importance of critical material accountability. These values directly impact the accuracy needs of fluid buyers and sellers in custody transfers. These concerns impact the designers and operators of chemical process systems where control and productivity optimization depend critically upon measurement precision. Public health and safety depend upon the quality of numerous pollutant measurements - both liquid and gaseous. The performance testing of engines - both automotive and aircraft are critically based upon accurate fuel measurements - both liquid and oxidizer streams. Fluid flowrate measurements are established differently from counterparts in length and mass measurement systems because these have the benefits of " identity" standards. For rate measurement systems the metrology is based upon " derived standards" . These use facilities and transfer standards which are designed built characterized and used to constitute basic measurement capabilities and quantify performance - accuracy and precision. Because " identity standards" do not exist for flow measurements facsimiles or equivalents must

Measuring the Effect of Housing Quality Interventions: The Case of the New Zealand “Rental Warrant of Fitness”

PubMed Central

Telfar-Barnard, Lucy; Bennett, Julie; Howden-Chapman, Philippa; Jacobs, David E.; Ormandy, David; Cutler-Welsh, Matthew; Preval, Nicholas; Baker, Michael G.; Keall, Michael

2017-01-01

In New Zealand, as in many other countries, housing in the private-rental sector is in worse condition than in the owner-occupier housing sector. New Zealand residential buildings have no inspection regime after original construction signoff. Laws and regulations mandating standards for existing residential housing are outdated and spread over a range of instruments. Policies to improve standards in existing housing have been notoriously difficult to implement. In this methods paper, we describe the development and implementation of a rental Warrant of Fitness (WoF) intended to address these problems. Dwellings must pass each of 29 criteria for habitability, insulation, heating, ventilation, safety, amenities, and basic structural soundness to reach the WoF minimum standard. The WoF’s development was based on two decades of research on the impact of housing quality on health and wellbeing, and strongly influenced by the UK Housing Health and Safety Rating System and US federal government housing standards. Criteria were field-tested across a range of dwelling types and sizes, cities, and climate zones. The implementation stage of our WoF research consists of a non-random controlled quasi-experimental study in which we work with two city-level local government councils to implement the rental WoF, recruiting adjoining council areas as controls, and measuring changes in health, economic, and social outcomes. PMID:29112147

Current status and standards for establishment of hemodialysis units in Korea

PubMed Central

Lee, Young-Ki; Kim, Kiwon

2013-01-01

The number of hemodialysis patients and dialysis facilities is increasing each year, but there are no surveillance programs validating that the services and equipment of each hemodialysis unit meet specified safety and quality standards. There is a concern that excessive competition and illegal activities committed by some dialysis facilities may violate patients' right to health. Contrastingly, developed countries often have their own survey program to provide initial certification and monitoring to ensure that these clinics continue to meet basic requirements. Because hemodialysis units provide renal replacement therapy to critical patients suffering from severe chronic renal failure, appropriate legal regulation is important for the provision of initial certification and maintenance of facility, equipment, and human resource quality. Therefore, several standards providing minimum requirements for the area of hemodialysis unit, equipment for emergency care, physician and nurse staffs, water purification and quality management are urgently needed. PMID:23682218

Safety self-efficacy and safety performance: potential antecedents and the moderation effect of standardization.

PubMed

Katz-Navon, Tal; Naveh, Eitan; Stern, Zvi

2007-01-01

The purpose of this paper is to suggest a new safety self-efficacy construct and to explore its antecedents and interaction with standardization to influence in-patient safety. The paper used a survey of 161 nurses using a self-administered questionnaire over a 14-day period in two large Israeli general hospitals. Nurses answered questions relating to four safety self-efficacy antecedents: enactive mastery experiences; managers as safety role models; verbal persuasion; and safety priority, that relate to the perceived level of standardization and safety self-efficacy. Confirmatory factor analysis was used to assess the scale's construct validity. Regression models were used to test hypotheses regarding the antecedents and influence of safety self-efficacy. Results indicate that: managers as safety role models; distributing safety information; and priority given to safety, contributed to safety self-efficacy. Additionally, standardization moderated the effects of safety self-efficacy and patient safety such that safety self-efficacy was positively associated with patient safety when standardization was low rather than high. Hospital managers should be aware of individual motivations as safety self-efficacy when evaluating the potential influence of standardization on patient safety. Theoretically, the study introduces a new safety self-efficacy concept, and captures its antecedents and influence on safety performance. Also, the study suggests safety self-efficacy as a boundary condition for the influence of standardization on safety performance. Implementing standardization in healthcare is problematic because not all processes can be standardized. In this case, self-efficacy plays an important role in securing patient safety. Hence, safety self-efficacy may serve as a "substitute-for-standardization," by promoting staff behaviors that affect patient safety.

Food Safety: MedlinePlus Health Topic

MedlinePlus

... reached its expiration date. United States Department of Agriculture Start Here 4 Basic Steps to Food Safety ... Food Safety When Preparing Holiday Meals (Department of Agriculture, Food Safety and Inspection Service) - PDF Also in ...

[Good practices and techniques for prevention of accidents at work and occupational diseases. New database of Inail].

PubMed

Bindi, L; Ossicini, A

2007-01-01

The project "The publication of good practices and good techniques for prevention" is one the priorities of nail. This computerized system for the collection of good practices and standards of Good Technology is aimed to health and safety of workers. The basic objective of the database is to provide a valuable tool, usable, dynamic and implemented, in order to facilitate and direct the access to BP and BT it by people responsible for SSL. At the same time constitutes a tool strategically important for enterprises (especially SMEs) in terms of technological innovation and competitiveness, related to the prevention, safety and health of workers. The realization of this project has involved many of the professionals (chemists, engineers, doctors, biologists, geologists, etc.), and everyone gives his intake of qualified professional competence.

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices

DOT National Transportation Integrated Search

2007-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting : effective, science-based traffic safety countermeasures for major highway safety problem areas. : The guide describes major strategies and countermeasures t...

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices

DOT National Transportation Integrated Search

2005-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting effective, science-based traffic safety countermeasures for major highway safety problem areas. The guide: describes major strategies and countermeasures that...

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices

DOT National Transportation Integrated Search

2009-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting effective, science-based traffic safety countermeasures for major highway safety problem areas. The guide: describes major strategies and countermeasures that...

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices

DOT National Transportation Integrated Search

2008-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting effective, science-based traffic safety countermeasures for major highway safety problem areas. The guide: describes major strategies and countermeasures that...

An Enclosed Laser Calibration Standard

NASA Astrophysics Data System (ADS)

Adams, Thomas E.; Fecteau, M. L.

1985-02-01

We have designed, evaluated and calibrated an enclosed, safety-interlocked laser calibration standard for use in US Army Secondary Reference Calibration Laboratories. This Laser Test Set Calibrator (LTSC) represents the Army's first-generation field laser calibration standard. Twelve LTSC's are now being fielded world-wide. The main requirement on the LTSC is to provide calibration support for the Test Set (TS3620) which, in turn, is a GO/NO GO tester of the Hand-Held Laser Rangefinder (AN/GVS-5). However, we believe it's design is flexible enough to accommodate the calibration of other laser test, measurement and diagnostic equipment (TMDE) provided that single-shot capability is adequate to perform the task. In this paper we describe the salient aspects and calibration requirements of the AN/GVS-5 Rangefinder and the Test Set which drove the basic LTSC design. Also, we detail our evaluation and calibration of the LTSC, in particular, the LTSC system standards. We conclude with a review of our error analysis from which uncertainties were assigned to the LTSC calibration functions.

Protection from radon exposure at home and at work in the directive 2013/59/Euratom.

PubMed

Bochicchio, F

2014-07-01

In recent years, international organisations involved in radiation protection and public health have produced new guidance, recommendations and requirements aiming better protection from radon exposure. These organisations have often worked in close collaboration in order to facilitate the establishment of harmonised standards. This paper deals with such standards and specifically with the new European Council Directive of 5 December 2013 on basic safety standards for protection against the dangers arising from exposure to ionising radiation (2013/59/Euratom). This new Directive has established a harmonised framework for the protection against ionising radiations, including protection from radon exposure. Requirements for radon in workplace are much more tightening than in previous Directive, and exposures to radon in dwellings are regulated for the first time in a Directive. Radon-related articles of this Directive are presented and discussed in this paper, along with some comparisons with other relevant international standards. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

41 CFR 102-80.10 - What are the basic safety and environmental management policies for real property?

Code of Federal Regulations, 2014 CFR

2014-01-01

... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false What are the basic safety and environmental management policies for real property? 102-80.10 Section 102-80.10 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices, fifth edition, 2010.

DOT National Transportation Integrated Search

2010-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting : effective, science-based traffic safety countermeasures for major highway safety problem areas. : The guide: : o describes major strategies and countermeasu...

The carrier safety measurement system (CSMS) effectiveness test by behavior analysis and safety improvement categories (BASICs)

DOT National Transportation Integrated Search

2014-01-24

The Carrier Safety Measurement System (CSMS) is the Federal Motor Carrier Safety Administrations (FMCSA's) workload prioritization tool. This tool is used to identify carriers with potential safety issues so that they are subject to interventions ...

A journey from basic stem cell discovery to clinical application: the case of adventitial progenitor cells.

PubMed

Spencer, Helen L; Slater, Sadie C; Rowlinson, Jonathan; Morgan, Tom; Culliford, Lucy A; Guttridge, Martin; Emanueli, Costanza; Angelini, Gianni; Madeddu, Paolo

2015-01-01

Ischemia is a leading cause of death in the western world. Regenerative medicine aims to improve healing of ischemic injury by complementing pharmacologic/interventional treatments. Navigating regenerative therapies from 'bench-to-bedside' is a multistep time-consuming process, balancing cell expansion, purity, safety and efficacy while complying with regulatory guidelines. Studies started in academic laboratories unused to long-term planning often fail because of poor strategy design, lack of contingency plans or funding. We provide a strategic insight into our translation of saphenous vein-derived adventitial progenitor cells into a clinical grade product to treat angina. We discuss discovery phases, introduction of standard operating procedures and upgrade to clinical standards. We also examine contractual aspects of transferring to GMP-accredited facilities for clinical production and unexpected hurdles.

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. A motor carrier must meet the safety fitness standard set forth...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. A motor carrier must meet the safety fitness standard set forth...

[Exploration of the Association Between Workplace Bullying and Attitudes Toward Patient Safety in Female Nurses].

PubMed

Lin, Yuh-Hsuan; Hsiao, Shu-Tai Sheen; Lin, Chiou-Fen; Yang, Chyn-Yng; Chung, Min-Huey

2018-02-01

Workplace bullying is known to have a significant and detrimental effect on the physical and psychological outcomes of its victims. The reactions of victims to bullying may decrease clinical care outcomes and patient safety. To explore the relationship between workplace bullying and the attitudes of female nurses toward the safety of their patients. This cross-sectional survey study used convenience sampling. Participants included female nurses from a regional teaching hospital. The research tool was a three-part, structured questionnaire that included a basic personal information datasheet, negative behavior scale, and patient safety attitude scale. The researcher distributed 420 questionnaires and collected 329 valid samples (valid return rate: 78.3%). Data were analyzed using SPSS software version 22.0. The analysis found that 29.8% of the participants had suffered from various degrees of workplace bullying. The mean score for patient safety attitudes was 3.58 (standard deviation = 0.55). Workplace bullying and patient safety attitudes were negatively correlated (p < .1), and being a recipient of workplace bullying was identified as a significant predictor of attitudes toward patient safety. Based on the results, we suggest that supervisors should take the initiative to care for their nursing staffs and to provide them with training in conflict-oriented skills. Organization managers should set up relevant committee-notification mechanisms that construct the safe working environment necessary to reduce workplace bullying and to enhance the patient safety attitudes of nurses, which will indirectly improve the quality of patient care.

Gas pipeline relief valves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bright, G.F.

1974-01-01

A discussion of the increasing activity of natural gas pipeline companies in the analysis of the overpressure protection methods for complying with the provisions of Part 192, Title 49, Code of Federal Regulations ''Transportation of Natural and Other Gas by Pipelines; Minimum Federal Safety Standards'' and with the USAS B31.8 Code covers the basic requirements for protection against accidental overpressure as being essentially the same in both documents, i.e., at the maximum allowable operating overpressure in a gas system can be exceeded either at a compressor station or downstream of a pressure control valve; mandatory use of overpressure protection devicesmore » in these situations, except for those cases which exempt some service regulators because the distribution system pressure is less than 60 psig and six other requirements of design, performance, and size are met; and basic design requirements of a pressure relief or limiting station and the components used.« less

Characteristic of Adaptability - one of basic categories of the social aspect of sustainable housing construction

NASA Astrophysics Data System (ADS)

Orłowski, Z.; Radziejowska, A.; Orłowski, M.

2017-10-01

In the article the authors consider one of the basic aspects of sustainable construction regarding the social utility of a building. According to standard PN-EN 16309+A1:2014-12 during evaluating the social aspect should be assessed six categories: accessibility, adaptability, comfort and health, neighborhood, maintenance, safety and security. The authors present the evaluation criteria witch should be taken into account in the assessment of the second of them. Adaptability has been divided into three categories: The buidling’s ability to accomodate the change of user requirements, The buidling’s ability to accomodate technical changes, The buidling’s ability to accomodate the change of use. Each subcategory has been further elaborated by the criteria for which authors present proposal for the scale of assessments. The authors present a part of a work to construct a method for assessing the social characteristics of the residential buildings.

Unsatisfied basic needs of older patients in emergency care environments - obstacles to an active role in decision making.

PubMed

Nydén, Kristoffer; Petersson, Martin; Nyström, Maria

2003-03-01

Little attention is paid in Emergency Care Units (ECUs) in Sweden to the special needs of older people. The aim of this study was thus to analyse older people's basic needs in the emergency care environment. The study was carried out with a life-world interpretative approach, and the theoretical framework for interpretation was Abraham Maslow's theory of motivation and personality. Seven informants aged between 65 and 88 years, with various experiences of being patients with urgent as well as non-urgent health-related problems, were interviewed about their experiences of ECU care. Their basic needs at the lower levels of Maslow's hierarchy were well-represented in the data. Higher needs, such as desire to know and understand, appeared to be totally neglected. Safety needs dominated the whole situation. Our conclusion is that standards of care must be developed in Sweden to make older patients feel safer and more secure in ECUs. Furthermore, the principles of nursing care for older patients need to be defined in order to encourage them to take an active part in their own health process.

Risk assessment and management of radiofrequency radiation exposure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dabala, Dana; Surducan, Emanoil; Surducan, Vasile

2013-11-13

Radiofrequency radiation (RFR) industry managers, occupational physicians, security department, and other practitioners must be advised on the basic of biophysics and the health effects of RF electromagnetic fields so as to guide the management of exposure. Information on biophysics of RFR and biological/heath effects is derived from standard texts, literature and clinical experiences. Emergency treatment and ongoing care is outlined, with clinical approach integrating the circumstances of exposure and the patient's symptoms. Experimental risk assessment model in RFR chronic exposure is proposed. Planning for assessment and monitoring exposure, ongoing care, safety measures and work protection are outlining the proper management.

Protecting your eyes in the laser operating room.

PubMed

Sallavanti, R A

1995-01-01

1. Laser protective eyewear is nearly as important to the OR nurse as the surgical mask in an operating room where laser surgery is performed. 2. Most hospitals require OR personnel to wear protective eyewear during laser procedures in voluntary compliance with American National Standards Institute (ANSI) Z136.3 for the safe use of lasers in health care facilities. 3. The basic steps to protecting your eyes are as follows: Select the appropriate eyewear (plastic or glass); make sure the eyewear fits properly; wear the protective lenses during laser testing and operation; and heed your laser safety officer.

Risk assessment and management of radiofrequency radiation exposure

NASA Astrophysics Data System (ADS)

Dabala, Dana; Surducan, Emanoil; Surducan, Vasile; Neamtu, Camelia

2013-11-01

Radiofrequency radiation (RFR) industry managers, occupational physicians, security department, and other practitioners must be advised on the basic of biophysics and the health effects of RF electromagnetic fields so as to guide the management of exposure. Information on biophysics of RFR and biological/heath effects is derived from standard texts, literature and clinical experiences. Emergency treatment and ongoing care is outlined, with clinical approach integrating the circumstances of exposure and the patient's symptoms. Experimental risk assessment model in RFR chronic exposure is proposed. Planning for assessment and monitoring exposure, ongoing care, safety measures and work protection are outlining the proper management.

Basic Safety II. Apprentice Related Training Module.

ERIC Educational Resources Information Center

Rice, Eric; Spetz, Sally H.

One in a series of core instructional materials for apprentices to use during the first or second years of apprentice-related subjects training, this booklet deals with basic safety. The first section consists of an outline of the content and scope of the core materials as well as a self-assessment pretest. Covered in the four instructional…

Regulatory experience in applying a radiological environmental protection framework for existing and planned nuclear facilities.

PubMed

Mihok, S; Thompson, P

2012-01-01

Frameworks and methods for the radiological protection of non-human biota have been evolving rapidly at the International Commission on Radiological Protection and through various European initiatives. The International Atomic Energy Agency has incorporated a requirement for environmental protection in the latest revision of its Basic Safety Standards. In Canada, the Canadian Nuclear Safety Commission has been legally obligated to prevent unreasonable risk to the environment since 2000. Licensees have therefore been meeting generic legal requirements to demonstrate adequate control of releases of radioactive substances for the protection of both people and biota for many years. In the USA, in addition to the generic requirements of the Environmental Protection Agency and the Nuclear Regulatory Commission, Department of Energy facilities have also had to comply with specific dose limits after a standard assessment methodology was finalised in 2002. Canadian regulators developed a similar framework for biota dose assessment through a regulatory assessment under the Canadian Environmental Protection Act in the late 1990s. Since then, this framework has been applied extensively to satisfy legal requirements under the Canadian Environmental Assessment Act and the Nuclear Safety and Control Act. After approximately a decade of experience in applying these methods, it is clear that simple methods are fit for purpose, and can be used for making regulatory decisions for existing and planned nuclear facilities. Copyright © 2012. Published by Elsevier Ltd.

10 CFR 835.901 - Radiation safety training.

Code of Federal Regulations, 2012 CFR

2012-01-01

... DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Radiation Safety Training § 835.901 Radiation safety... radiation exposure; (2) Basic radiological fundamentals and radiation protection concepts; (3) Physical... comply with the documented radiation protection program. (e) Radiation safety training shall be provided...

10 CFR 835.901 - Radiation safety training.

Code of Federal Regulations, 2014 CFR

2014-01-01

... DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Radiation Safety Training § 835.901 Radiation safety... radiation exposure; (2) Basic radiological fundamentals and radiation protection concepts; (3) Physical... comply with the documented radiation protection program. (e) Radiation safety training shall be provided...

10 CFR 835.901 - Radiation safety training.

Code of Federal Regulations, 2013 CFR

2013-01-01

... DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Radiation Safety Training § 835.901 Radiation safety... radiation exposure; (2) Basic radiological fundamentals and radiation protection concepts; (3) Physical... comply with the documented radiation protection program. (e) Radiation safety training shall be provided...

Red Cross Swimming Update.

ERIC Educational Resources Information Center

Vlasich, Cynthia

1989-01-01

Six new aquatic courses, developed by the Red Cross, are described. They are: Infant and Preschool Aquatics, Longfellow's Whale Tales (classroom water safety lessons for K-Six), Basic Water Safety, Emergency Water Safety, Lifeguard Training, and Safety Training for Swim Coaches. (IAH)

Risk analysis and its link with standards of the World Organisation for Animal Health.

PubMed

Sugiura, K; Murray, N

2011-04-01

Among the agreements included in the treaty that created the World Trade Organization (WTO) in January 1995 is the Agreement on the Application of Sanitary and Phytosanitary Measures (SPS Agreement) that sets out the basic rules for food safety and animal and plant health standards. The SPS Agreement designates the World Organisation for Animal Health (OIE) as the organisation responsible for developing international standards for animal health and zoonoses. The SPS Agreement requires that the sanitary measures that WTO members apply should be based on science and encourages them to either apply measures based on the OIE standards or, if they choose to adopt a higher level of protection than that provided by these standards, apply measures based on a science-based risk assessment. The OIE also provides a procedural framework for risk analysis for its Member Countries to use. Despite the inevitable challenges that arise in carrying out a risk analysis of the international trade in animals and animal products, the OIE risk analysis framework provides a structured approach that facilitates the identification, assessment, management and communication of these risks.

International Society for the Advancement of Cytometry Cell Sorter Biosafety Standards

PubMed Central

Holmes, Kevin L.; Fontes, Benjamin; Hogarth, Philip; Konz, Richard; Monard, Simon; Pletcher, Charles H.; Wadley, Robert B.; Schmid, Ingrid; Perfetto, Stephen P.

2014-01-01

Flow cytometric cell sorting of biological specimens has become prevalent in basic and clinical research laboratories. These specimens may contain known or unknown infectious agents, necessitating precautions to protect instrument operators and the environment from biohazards arising from the use of sorters. To this end the International Society of Analytical Cytology (ISAC) was proactive in establishing biosafety guidelines in 1997 (Schmid et al., Cytometry 1997;28:99–117) and subsequently published revised biosafety standards for cell sorting of unfixed samples in 2007 (Schmid et al., Cytometry Part A J Int Soc Anal Cytol 2007;71A:414–437). Since their publication, these documents have become recognized worldwide as the standard of practice and safety precautions for laboratories performing cell sorting experiments. However, the field of cytometry has progressed since 2007, and the document requires an update. The new Standards provides guidance: (1) for laboratory design for cell sorter laboratories; (2) for the creation of laboratory or instrument specific Standard Operating Procedures (SOP); and (3) on procedures for the safe operation of cell sorters, including personal protective equipment (PPE) and validation of aerosol containment. PMID:24634405

Tire safety : everything rides on it

DOT National Transportation Integrated Search

2008-01-01

This booklet presents a comprehensive overview of tire safety, including information on the following topics: basic tire maintenance; Uniform Tire Quality Grading System; fundamental characteristics of tires; and tire safety tips.

Research on the management and endorsement of nuclear safety standards in the United States and its revelation for China

NASA Astrophysics Data System (ADS)

Liu, Ting; Tian, Yu; Yang, Lili; Gao, Siyi; Song, Dahu

2018-01-01

This paper introduces the American standard system, the Nuclear Regulatory Commission (NRC)’s responsibility, NRC nuclear safety regulations and standards system, studies on NRC’s standards management and endorsement mode, analyzes the characteristics of NRC standards endorsement management, and points out its disadvantages. This paper draws revelation from the standard management and endorsement model of NRC and points suggestion to China’s nuclear and radiation safety standards management.The issue of the “Nuclear Safety Law”plays an important role in China’s nuclear and radiation safety supervision. Nuclear and radiation safety regulations and standards are strong grips on the implementation of “Nuclear Safety Law”. This paper refers on the experience of international advanced countriy, will effectively promote the improvement of the endorsed management of China’s nuclear and radiation safety standards.

100 years of occupational safety research: From basic protections and work analysis to a multilevel view of workplace safety and risk.

PubMed

Hofmann, David A; Burke, Michael J; Zohar, Dov

2017-03-01

Starting with initiatives dating back to the mid-1800s, we provide a high-level review of the key trends and developments in the application of applied psychology to the field of occupational safety. Factory laws, basic worker compensation, and research on accident proneness comprised much of the early work. Thus, early research and practice very much focused on the individual worker, the design of their work, and their basic protection. Gradually and over time, the focus began to navigate further into the organizational context. One of the early efforts to broaden beyond the individual worker was a significant focus on safety-related training during the middle of the 20th century. Toward the latter years of the 20th century and continuing the move from the individual worker to the broader organizational context, there was a significant increase in leadership and organizational climate (safety climate) research. Ultimately, this resulted in the development of a multilevel model of safety culture/climate. After discussing these trends, we identify key conclusions and opportunities for future research. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Fundamental Use of Surgical Energy (FUSE): An Essential Educational Program for Operating Room Safety

PubMed Central

Jones, Stephanie B; Munro, Malcolm G; Feldman, Liane S; Robinson, Thomas N; Brunt, L Michael; Schwaitzberg, Steven D; Jones, Daniel B; Fuchshuber, Pascal R

2017-01-01

Operating room (OR) safety has become a major concern in patient safety since the 1990s. Improvement of team communication and behavior is a popular target for safety programming at the institutional level. Despite these efforts, essential safety gaps remain in the OR and procedure rooms. A prime example is the use of energy-based devices in ORs and procedural areas. The lack of fundamental understanding of energy device function, design, and application contributes to avoidable injury and harm at a rate of approximately 1 to 2 per 1000 patients in the US. Hundreds of OR fires occur each year in the US, some causing severe injury and even death. Most of these fires are associated with the use of energy-based surgical devices. In response to this safety issue, the Society of American Gastrointestinal and Endoscopic Surgeons (SAGES) developed the Fundamental Use of Surgical Energy (FUSE) program. This program includes a standardized curriculum targeted to surgeons, other physicians, and allied health care professionals and a psychometrically designed and validated certification test. A successful FUSE certification documents acquisition of the basic knowledge needed to safely use energy-based devices in the OR. By design FUSE fills a void in the curriculum and competency assessment for surgeons and other procedural specialists in the use of energy-based devices in patients. PMID:28241913

16 CFR 1205.1 - Scope of the standard.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

16 CFR 1205.1 - Scope of the standard.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

16 CFR 1205.1 - Scope of the standard.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

The History of Infant Formula: Quality, Safety, and Standard Methods.

PubMed

Wargo, Wayne F

2016-01-01

Food-related laws and regulations have existed since ancient times. Egyptian scrolls prescribed the labeling needed for certain foods. In ancient Athens, beer and wines were inspected for purity and soundness, and the Romans had a well-organized state food control system to protect consumers from fraud or bad produce. In Europe during the Middle Ages, individual countries passed laws concerning the quality and safety of eggs, sausages, cheese, beer, wine, and bread; some of these laws still exist today. But more modern dietary guidelines and food regulations have their origins in the latter half of the 19th century when the first general food laws were adopted and basic food control systems were implemented to monitor compliance. Around this time, science and food chemistry began to provide the tools to determine "purity" of food based primarily on chemical composition and to determine whether it had been adulterated in any way. Since the key chemical components of mammalian milk were first understood, infant formulas have steadily advanced in complexity as manufacturers attempt to close the compositional gap with human breast milk. To verify these compositional innovations and ensure product quality and safety, infant formula has become one of the most regulated foods in the world. The present paper examines the historical development of nutritional alternatives to breastfeeding, focusing on efforts undertaken to ensure the quality and safety from antiquity to present day. The impact of commercial infant formulas on global regulations is addressed, along with the resulting need for harmonized, fit-for-purpose, voluntary consensus standard methods.

Private-public sector co-operation to improve pesticide safety standards in developing countries.

PubMed

Ellis, W W

1998-01-01

This paper draws on the author's experiences of the pilot phase of the Safe Use Project (SUP) in Thailand; this project is a part of a major GIFAP initiative carried out in some developing countries. The SUP's objectives were; i) to raise awareness and compliance in the safe handling and storage of pesticides within the industry, the medical profession and the end-users; ii) to reduce the incidence of pesticide poisoning; iii) to protect the environment; iiii) to help relevant government agencies with resources, expertise and training. To achieve those objectives, the SUP used local-language training resources, provided basic training, lobbied for changes in governmental policies and regulations, and acted as a focal point for pesticide safety-related information. The SUP targeted the whole distribution chain, from importer/formulator, through to the endusers. Also medical profession, teachers and school students were targeted. On the base of independent audit and surveys, a general improvement in awareness has been shown within targeted groups; a longer time frame is required to detect meaningful changes in farmer practice. The SUP key programmes have been: I) training of trainers, retailers and farmers; II) schools programme; III) medical training; IV) protective clothing; V) industry standards; VI) model farm. The main conclusions of the pilot phase were: i) pesticide safety needs to be addressed by all concerned agencies in a joint effort; ii) a rural development perspective must be adopted in improving pesticide safety; iii) integrated pest management training programmes must include precautionary advice for proper handling, use and disposal of pesticides, wherever these are necessary.

Aflatoxin Regulations in a Network of Global Maize Trade

PubMed Central

Wu, Felicia; Guclu, Hasan

2012-01-01

Worldwide, food supplies often contain unavoidable contaminants, many of which adversely affect health and hence are subject to regulations of maximum tolerable levels in food. These regulations differ from nation to nation, and may affect patterns of food trade. We soughtto determine whether there is an association between nations' food safety regulations and global food trade patterns, with implications for public health and policymaking. We developed a network model of maize trade around the world. From maize import/export data for 217 nations from 2000–2009, we calculated basic statistics on volumes of trade; then examined how regulations of aflatoxin, a common contaminant of maize, are similar or different between pairs of nations engaging in significant amounts of maize trade. Globally, market segregation appears to occur among clusters of nations. The United States is at the center of one cluster; European countries make up another cluster with hardly any maize trade with the US; and Argentina, Brazil, and China export maize all over the world. Pairs of nations trading large amounts of maize have very similar aflatoxin regulations: nations with strict standards tend to trade maize with each other, while nations with more relaxed standards tend to trade maize with each other. Rarely among the top pairs of maize-trading nations do total aflatoxin standards (standards based on the sum of the levels of aflatoxins B1, B2, G1, and G2) differ by more than 5 µg/kg. These results suggest that, globally, separate maize trading communities emerge; and nations tend to trade with other nations that have very similar food safety standards. PMID:23049773

Arizona Traffic Safety Education, K-3. Pedestrian Safety, Grade 3.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains nine lessons on pedestrian safety for use in grade 3. Introductory information provided for the teacher includes basic highway safety concepts, stressing communication methods for…

Laboratory Safety in the Biology Lab.

ERIC Educational Resources Information Center

Ritch, Donna; Rank, Jane

2001-01-01

Reports on a research project to determine if students possess and comprehend basic safety knowledge. Shows a significant increase in the amount of safety knowledge gained when students are exposed to various topics in laboratory safety and are held accountable for learning the information as required in a laboratory safety course. (Author/MM)

Arizona Traffic Safety Education, K-8. Pedestrian Safety, Grade 2.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains eight lessons on pedestrian safety for use in grade 2. Introductory information provided for the teacher includes basic highway safety concepts, stressing communication methods for…

Arizona Traffic Safety Education, K-8. Pedestrian Safety, Grades K-1.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains thirteen lessons on pedestrian safety for use in kindergarten and grade 1. Introductory information provided for the teacher includes basic highway safety concepts, stressing…

45 CFR 156.1110 - Establishment of patient safety standards for QHP issuers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... STANDARDS RELATED TO EXCHANGES Quality Standards § 156.1110 Establishment of patient safety standards for QHP issuers. (a) Patient safety standards. A QHP issuer that contracts with a hospital with greater... 45 Public Welfare 1 2014-10-01 2014-10-01 false Establishment of patient safety standards for QHP...

Recommendations for postmarketing surveillance studies in haemophilia and other bleeding disorders.

PubMed

Lassila, R; Rothschild, C; De Moerloose, P; Richards, M; Perez, R; Gajek, H

2005-07-01

Prospective surveillance studies to monitor drug safety in the postapproval period are rarely employed systematically, although they are of greatest value for caregivers, drug users and regulatory authorities. Safety issues have affected not only conventional pharmaceuticals, but also especially coagulation factors in haemophilia treatment. The reputation of postmarketing surveillance (PMS) studies has been questionable, mainly due to their misuse to solicit prescriptions. Other weaknesses include inappropriate design, lack of standardized observation, limited follow-up periods, absence of rigour in identifying potential adverse drug effects, and infrequent publication. Although well-designed clinical trials represent the gold standard for generating sound clinical evidence, a number of aspects would make PMS studies valuable, if properly conducted. One of their main advantages is broader inclusion, and absence of an 'experimental' design. Lack of proper guidelines, and standardization may constitute a reason for the generally low quality of PMS studies. This paper proposes guidelines for haemophilia-specific PMS studies, in order to improve the acceptance of a basically valuable tool. In the absence of consistent regulatory guidance it will be especially important that the design and supervision of PMS studies involves physicians from the beginning. This will not only make such studies more scientifically relevant, but also help to implement them into daily clinical practice. Specifically in haemophilia, PMS studies may provide valuable data on clinical outcomes, or Quality of Life, which is of great importance when considering adequate standards of care in haemophilia patients.

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.; Baggs, Rhoda

2007-01-01

Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 7 2012-07-01 2012-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

Fire Safety: Any Time, Any Place. First Grade. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the first grade component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of first grade students, its objectives include acquiring basic knowledge of fire and burn hazards, developing a basic understanding of simple injury reduction, and encouraging parent involvement.…

Waterworks Operator Training Manual.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

Sixteen self-study waterworks operators training modules are provided. Module titles are the following: basic mathematics, basic chemistry, analysis procedures, microbiology, basic electricity, hydraulics, chlorination, plant operation, surface water, ground water, pumps, cross connections, distribution systems, safety, public relations, and…

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

Implications of the implementation of the revised dose limit to the lens of the eye: the view of IRPA professionals.

PubMed

Broughton, J; Cantone, M C; Ginjaume, M; Shah, B; Czarwinski, R

2015-06-01

In April 2011, the International Commission on Radiological Protection issued a statement on reduction of the equivalent dose limits for the lens of the eye, and strongly recommended its consideration in the revision of the International Atomic Energy Agency's International Basic Safety Standards on Radiation Protection. The reduced dose limit was incorporated in the final version of the Basic Safety Standards. As significant concern was expressed by radiation protection professionals worldwide, the International Radiation Protection Association (IRPA) established a task group to assess the impact of implementation of the revised dose limit for the lens of the eye for occupational exposure. IRPA Associate Societies (ASs) were asked for their views using a questionnaire addressing three topics: implications for dosimetry, implications for methods of protection, and wider implications. The responses received indicate various methods of approach and express different points of view, reflecting nuances of particular ASs or specific professional groups. Topic experts nominated by ASs were selected to assist with collation of responses, and a report was produced by the task group. Conclusions were drawn on the three issues, including potential cost implications. A number of recommendations were drawn from the responses received including: the request for more understanding about the relationship between exposure of the lens of the eye and cataract formation, and further guidance to assist implementation; the importance of economic and social considerations when introducing the limits into national regulations; the need to propose or define procedures related to employment of people with existing or pre-cataract conditions; and the practical aspects relating to dosimetry and protective equipment. © The International Society for Prosthetics and Orthotics Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Applying standard epidemiological methods for investigating foodborne disease outbreak in resource-poor settings: lessons from Vietnam.

PubMed

Vo, Thuan Huu; Nguyen, Dat Van; Le, Loan Thi Kim; Phan, Lan Trong; Nuorti, J Pekka; Tran Minh, Nguyen Nhu

2014-07-01

An outbreak of gastroenteritis occurred among workers of company X after eating lunch prepared by a catering service. Of 430 workers attending the meal, 56 were hospitalized with abdominal pain, diarrhea, vomiting, and nausea, according to the initial report. We conducted an investigation to identify the extent, vehicle, and source of the outbreak. In our case-control study, a case was a worker who attended the meal and who was hospitalized with acute gastroenteritis; controls were randomly selected from non-ill workers. Cases and controls were interviewed using a standard questionnaire. We used logistic regression to calculate adjusted odds ratios for the consumption of food items. Catering service facilities and food handlers working for the service were inspected. Food samples from the catering service were tested at reference laboratories. Of hospitalized cases, 54 fulfilled the case definition, but no stool specimens were collected for laboratory testing. Of four food items served during lunch, only "squash and pork soup" was significantly associated with gastroenteritis, with an adjusted odds ratio of 9.5 (95 % CI 3.2, 27.7). The caterer did not separate cooked from raw foods but used the same counter for both. Cooked foods were kept at room temperature for about 4 h before serving. Four of 14 food handlers were not trained on basic food safety principles and did not have health certificates. Although no microbiological confirmation was obtained, our epidemiological investigation suggested that squash and pork soup caused the outbreak. Hospitals should be instructed to obtain stool specimens from patients with gastroenteritis. Food catering services should be educated in basic food safety measures.

Observation of IPL spectra using detector system incorporating broadband optical filters

NASA Astrophysics Data System (ADS)

Clarkson, D. McG.

2007-07-01

Systems using intense pulsed light are being increasingly used in therapy applications where issues related to safety of devices and also of performance are becoming more urgent to address. Mechanisms to address this include a suitable standards framework and also the development and application of appropriate measurement techniques. An approach of using conventional bandpass optical filters and silicon photodetectors has been implemented using an analogue USB data capture interfaces linked to a laptop PC. An initial system with 8 concurrent channels has been upgraded to a separate system sampling up to 16 analogue channels. Sampling takes place at the maximum hardware conversion rate of the USB device. Observations have been made of a range of intense pulsed light systems, including a Lumenis One unit with a range of discrete filters. The system has been of value in determining the basic parameters of output pulse profile and spectral composition. This has in turn been related to aspects of standards development for both device manufacture and allocation of appropriate safety eyewear. Initial assessments of a subset of intense pulsed light systems indicate significant complexities in terms, for example, of variation in spectral content as a function of device output setting.

Alternative Fuels Data Center: Biodiesel Codes, Standards, and Safety

Science.gov Websites

Codes, Standards, and Safety to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Codes, Standards, and Safety on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Codes , Standards, and Safety on Twitter Bookmark Alternative Fuels Data Center: Biodiesel Codes, Standards, and

41 CFR 50-204.2 - General safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true General safety and health... Public Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 204-SAFETY AND HEALTH STANDARDS FOR FEDERAL SUPPLY CONTRACTS General Safety and Health Standards § 50-204.2 General safety and health standards. (a) Every...

77 FR 76005 - Submission for OMB Review; Comment Request-Safety Standard for Walk-Behind Power Lawn Mowers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

... Request--Safety Standard for Walk-Behind Power Lawn Mowers AGENCY: Consumer Product Safety Commission... with the Commission's safety standard for walk- behind power lawn mowers. DATES: Written comments on... of approval of the collection of information required in the Safety Standard for Walk-Behind Power...

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices : eighth edition : 2015

DOT National Transportation Integrated Search

2015-11-01

The guide is a basic reference to assist State Highway Safety Offices in selecting effective, evidence- based : countermeasures for traffic safety problem areas. These areas include: : - Alcohol-and Drug-Impaired Driving; : - Seat Belts and Child Res...

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices : seventh edition : 2013

DOT National Transportation Integrated Search

2013-04-01

The guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting effective, evidence-based countermeasures for traffic safety problem areas. These areas include: : - Alcohol-Impaired and Drugged Driving; : - Seat Belts and C...

Basic life support training into cardiac rehabilitation programs: A chance to give back. A community intervention controlled manikin study.

PubMed

González-Salvado, Violeta; Abelairas-Gómez, Cristian; Peña-Gil, Carlos; Neiro-Rey, Carmen; Barcala-Furelos, Roberto; González-Juanatey, José Ramón; Rodríguez-Núñez, Antonio

2018-03-12

Early basic life support is crucial to enhance survival from out-of-hospital cardiac arrest but rates remain low, especially in households. High-risk groups' training has been advocated, but the optimal method is unclear. The CArdiac REhabilitation and BAsic life Support (CAREBAS) project aims to compare the effectiveness of two basic life support educational strategies implemented in a cardiac rehabilitation program. A community intervention study including consecutive patients enrolled on an exercise-based cardiac rehabilitation program after acute coronary syndrome or revascularization was conducted. A standard basic life support training (G-Stan) and a novel approach integrating cardiopulmonary resuscitation hands-on rolling refreshers (G-CPR) were randomly assigned to each group and compared. Basic life support performance was assessed by means of simulation at baseline, following brief instruction and after the 2-month program. 114 participants were included and 108 completed the final evaluation (G-Stan:58, G-CPR:50). Basic life support performance was equally poor at baseline and significantly improved following a brief instruction. A better skill retention was found after the 2-month program in G-CPR, significantly superior for safety and sending for an automated external defibrillator. Confidence and self-perceived preparation were also significantly greater in G-CPR after the program. Integrating cardiopulmonary resuscitation hands-on rolling refreshers in the training of an exercise-based cardiac rehabilitation program is feasible and improves patients' skill retention and confidence to perform a basic life support sequence, compared to conventional training. Exporting this formula to other programs may result in increased numbers of trained citizens, enhanced social awareness and bystander resuscitation. Copyright © 2018 Elsevier B.V. All rights reserved.

78 FR 37706 - Safety Standards for Infant Walkers and Infant Swings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-24

... Danny Keysar Child Product Safety Notification Act, if ASTM revises the underlying voluntary standard... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Parts 1216 and 1223 Safety Standards for Infant Walkers... the Danny Keysar Child Product Safety Notification Act, the U.S. Consumer Product Safety Commission...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 5 2012-10-01 2012-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

76 FR 43743 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0127] Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials...

Arizona Traffic Safety Education, K-8. Passenger Safety, Grade 3.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains four lessons and an appendix of school bus safety tips for use in grade 3. Introductory information provided for the teacher includes basic highway safety concepts, stressing…

76 FR 10246 - Updating Fire Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-24

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Parts 17 and 59 RIN 2900-AN57 Updating Fire Safety Standards... regulations and update the standards for VA approval of such facilities, including standards for fire safety... to ``RIN 2900-AN57--Updating Fire Safety [[Page 10247

Patient safety culture and job stress among nurses in Mazandaran, Iran.

PubMed

Asefzadeh, Saeed; Kalhor, Rohollah; Tir, Mohammad

2017-12-01

Paying attention to patient safety is a basic right and a necessary issue in providing medical care, and failure to observe it leads to irreparable damage. One of the factors affecting an individuals' performance in an organization is stress, which also endangers their health. To determine the relationship between patient safety culture and levels of job stress among the nurses working in the hospitals affiliated with Mazandaran University of Medical Sciences. The present study was carried out using a cross-sectional method in the hospitals affiliated with Mazandaran University of Medical Sciences in 2016. A multistage stratified sampling method using a Morgan Table was employed to select 380 nurses as the study sample from among 3,180 nurses. They were selected by a multistage stratified sampling method. The study instruments were Stinemetz Standard Job Stress Questionnaire and Hospital Survey on Patient Safety Culture (HSOPSC). After the required data were collected, they were analyzed using descriptive and inferential statistical methods (Pearson correlation, independent-samples t-test, and ANOVA) through SPSS version 23. The results of the present study showed that 75% of the nurses experienced average and high levels of stress. Among different dimensions of safety culture, organizational learning and handoffs and transitions obtained the highest and the lowest scores, respectively (72.5 and 24.5). The mean score of safety culture dimensions was 51.52. The results of the Pearson correlation test showed that there was a direct significant relationship between different dimensions of safety culture among nurses and the level of stress (p≤0.05). According to the findings, patient safety should be considered as a strategic priority for the senior managers of the health system. In order to enhance patient safety, managers should pay special attention to evaluating safety culture in organizations that deliver health service, especially hospitals.

Generic detection of basic taxoids in wood of European Yew (Taxus baccata) by liquid chromatography-ion trap mass spectrometry.

PubMed

Kite, Geoffrey C; Rowe, Emily R; Veitch, Nigel C; Turner, Jill E; Dauncey, Elizabeth A

2013-02-01

The occurrence of the cardiotoxin taxine (comprising taxine B and several other basic taxoids) in leaves of Taxus baccata L. (European yew) is well known and has led to public concerns about the safety of eating or drinking from utensils crafted from the wood of this poisonous species. The occurrence of basic taxoids in the heartwood of T. baccata had not been examined in detail, although the bark is known to contain 2'β-deacetoxyaustrospicatine. Initial examination of heartwood extracts for 2'β-deacetoxyaustrospicatine by liquid chromatography-mass spectrometry (LC-MS) revealed the presence of this basic taxoid at about 0.0007% dry weight, using a standard isolated from bark. Analyses for taxine B, however, proved negative at the extract concentration analysed. Observing other basic taxoids within the heartwood extracts was facilitated by developing generic LC-MS methods that utilised a fragment arising from the N-containing acyl group of basic taxoids as a reporter ion. Of the various MS strategies available on a hybrid ion trap-orbitrap instrument that allowed observation of this reporter ion, combining all-ion collisions with high resolution ion filtering by the orbitrap was most effective, both in terms of the number of basic taxoids detected and sensitivity. Numerous basic taxoids, in addition to 2'β-deacetoxyaustrospicatine, were revealed by this method in heartwood extracts of T. baccata. Red wine readily extracted the basic taxoids from heartwood while coffee extracted them less efficiently. Contamination with basic taxoids could also be detected in soft cheese that had been spread onto wood. The generic LC-MS method for detecting basic taxoids complements specific methods for detecting taxine B when investigating yew poisoning cases in which the analysis of complex extracts may be required or taxine B has not been detected. Copyright © 2012 Elsevier B.V. All rights reserved.

Highway Maintenance Equipment Operator: Basic Core. Training Materials.

ERIC Educational Resources Information Center

Perky, Sandra Dutreau; And Others

This basic core curriculum is part of a three-part series of instructional guides designed for use in teaching a course in highway maintenance equipment operation. Addressed in the individual units of the curriculum, after an orientation unit, are safety; basic math; basic hand tools; procedures for loading. lashing, and unloading equipment;…

[Study on the reorganization of standards related to food contact ceramics and porcelains].

PubMed

Zhang, Jianbo; Zhu, Lei; Zhang, Hong; Liu, Shan; Wang, Zhutian

2014-07-01

To solve the problem of overlap, iterance and conflict among current standards related to food contact ceramics and porcelains. To collect all the current standards related to food contact ceramics and porcelains and reorganize them following the settled principles and method and list the standards that need to be revoked, revised, incorporated, or keep valid and excluded from the food safety standard system. 19 standards were collected in this study and reorganized. The main food safety indexes in these standards were the limits for lead and cadmium that released from food contact ceramics and porcelains. There were released limits for lead and cadmium in 10 standards, including 4 horizontal standards and 6 commodity standards. The provisions in these 10 standards were in conflict. And as a result of this, the 4 horizontal standards were suggested to be incorporated and revised to one food safety standard, while the 6 commodity standards were suggested to be revised and exclude the lead and cadmium provisions. Another 7 commodity standards only referenced provisions for lead and cadmium limits from horizontal standards, and these 7 standards were suggested to be excluded from food safety standard system. There were no food safety indexes in 2 standards of the 19 standards, these standards were considered not related to food safety and no need to be reorganized. There were conflicts about the released limits of lead and cadmium among the current standards related to food contact ceramics and porcelains. So, it is necessary to a set up a new food safety standard for released lead and cadmium permissible limits which can apply to all food contact ceramics and porcelains. This food safety standard should be based on food safety risk assessment and the actual situations of manufacture and usage of food contact ceramics and porcelains. The provisions in international standards and relative standards from other countries can also provide references to this standard.

[Standardization of hospital feeding].

PubMed

Caracuel García, Ángel Manuel

2015-05-07

Normalization can be understood as the establishing measures against repetitive situations through the development, dissemination, and application of technical design documents called standards. In Andalusia there are 45 public hospitals with 14,606 beds, and in which 11,700 full pensions / day are served. The Working Group on Hospital Food Standardization of the Andalusian Society for Clinical Nutrition and Dietetics, started in 2010, working on the certification of suppliers, product specifications, and meals technical card. - Develop a specific tool to help improving food safety through the certification of their suppliers. - Develop a standardized technical specifications of foodstuffs necessary for the development of menus established codes diets Andalusian hospitals document. - Develop a catalog of data sheets plates of hospital meals, to homogenize menus, respecting local and unifying criteria for qualitative and quantitative ingredients. - Providing documentation and studying of several public hospitals in Andalusia: • Product specifications and certification of suppliers. • International standards certification and distribution companies. • Legislation. • Data sheets for the menu items. • Specifications of different product procurement procedures. - Development of the draft standard HOSPIFOOD®, and approval of the version “0.0”. - Training course for auditors to this standard. - Development of a raw materials catalog as technical cards. - Meals Technical cards review and election of the ones which will be part of the document. After nearly three years of work, we have achieved the following products: - Standardized database of technical specifications for the production of food dietary codes for: fish, seafood, meat and meat products, meats and pates, ready meals, bread and pastries, preserves, milk and dairy products, oils, cereals, legumes , vegetables, fruits, fresh and frozen vegetables, condiments and spices. - Standardized database of technical cards for meals containing the following data: SAS Code, Province, Hospital, name plate, ingredients (g), edible ingredients (g) kcal, Proteins, HC, Fat and Fiber. - HOSPIFOOD® standard certification for food providers in hospitals, school cafeterias and other institutions of social restoration. Patients expect food that is offered during the stay in the hospital, meet basic standards of quality and safety, and therefore it is necessary to design and develop control systems from the award and / or acquisition of food (raw materials and finished) products which subsequently become part of the menu that is offered as part of their treatment. To avoid the effect of fraudulent practice in public health, it’s needed to ensure the quality and safety of the food from the origin and establish the standards for acquisition and subsequent use of it.

Worker Health and Safety: An Area of Conflicts

ERIC Educational Resources Information Center

Ashford, Nicholas A.

1975-01-01

The article outlines four basic conflicts concerning occupational health and safety, discusses the nature and dimensions of health and safety problems, examines the generation of information and its diffusion, and deals briefly with some economic issues. (Author)

Countermeasures that work : eighth edition : traffic tech.

DOT National Transportation Integrated Search

2016-01-01

The National Highway Traffic Safety Administration has published its eighth edition of Countermeasures That Work. The guide is a basic reference to assist State Highway Safety Offices (SHSOs) and other professionals interested in highway safety in se...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

76 FR 57635 - Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Standards Service Aviation Safety Inspectors; Correction AGENCY: Federal Aviation Administration (FAA), DOT... ``Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors'' (76 FR 52231... of, a Flight Standards Service Aviation Safety Inspector, and had direct responsibility to inspect...

Regulatory aspects of radiation protection.

PubMed

Janssens, A; Sarro Vaquero, M

2005-01-01

The paper introduces the projects launched by the European Community to foster prospects in dosimetry, radiation protection and best use of equipment in the medical field. These projects are put in perspective with the European legal framework for radiation protection, in particular, the Basic Safety Standards Directive, the Medical Exposures Directive and the Directive on High-Activity Sealed Sources. A summary is given of the overall mission statements of the commission services in the field of radiation protection, including the field of research, and how they relate to other actions in the overall health policy of the EU. In conclusion, a number of priority areas for future work in the medical field are highlighted.

Arizona Traffic Safety Education, K-8. Passenger Safety, Grade 2.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains eight lessons for use in grade 2. Introductory information provided for the teacher includes basic highway safety concepts, stressing communication methods for highway users,…

47 CFR 87.19 - Basic eligibility.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Basic eligibility. 87.19 Section 87.19 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Applications and Licenses § 87.19 Basic eligibility. (a) General. Foreign governments or their representatives...

24 CFR 51.203 - Safety standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Safety standards. 51.203 Section 51... Conventional Fuels or Chemicals of an Explosive or Flammable Nature § 51.203 Safety standards. The following... from a hazard: (a) Thermal Radiation Safety Standard. Projects shall be located so that: (1) The...

41 CFR 50-204.2 - General safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... health standards. 50-204.2 Section 50-204.2 Public Contracts and Property Management Other Provisions Relating to Public Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 204-SAFETY AND HEALTH STANDARDS FOR FEDERAL SUPPLY CONTRACTS General Safety and Health Standards § 50-204.2 General safety and health...

75 FR 17641 - Updating Fire Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-07

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Parts 17 and 59 RIN 2900-AN57 Updating Fire Safety Standards... for VA approval of such facilities, including standards for fire safety and heating and cooling... submitted in response to ``RIN 2900-AN57--Updating Fire Safety Standards.'' Copies of comments received will...

24 CFR 51.203 - Safety standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Safety standards. 51.203 Section 51... Conventional Fuels or Chemicals of an Explosive or Flammable Nature § 51.203 Safety standards. The following... from a hazard: (a) Thermal Radiation Safety Standard. Projects shall be located so that: (1) The...

76 FR 8699 - Locomotive Safety Standards; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

.... FRA-2009-0094 and FRA-2009-0095, Notice No. 2] RIN 2130-AC16 Locomotive Safety Standards; Correction... notifying the public that the correct docket number for the Locomotive Safety Standards notice of proposed... locomotive safety standards. See 76 FR 2200. The NPRM established a public docket to receive comments in...

77 FR 23159 - Locomotive Safety Standards; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-18

.... FRA-2009-0094 and FR-2009-0095, Notice No. 4] RIN 2130-AC16 Locomotive Safety Standards; Correction... notifying the public that the correct docket number for the Locomotive Safety Standards final rule is FRA... rule related to locomotive safety standards. See 77 FR 21312. The final rule established a public...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Notification of safety standards. 80.25 Section 80.25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS DISCLOSURE OF SAFETY STANDARDS AND COUNTRY OF REGISTRY § 80.25 Notification of safety standards. (a) Each owner, operator, agent...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2010 CFR

2010-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2011 CFR

2011-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2012 CFR

2012-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2014 CFR

2014-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2013 CFR

2013-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

78 FR 9623 - Federal Motor Vehicle Safety Standards; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-11

... [Docket No. NHTSA-2013-0011] RIN 2127-AL11 Federal Motor Vehicle Safety Standards; Air Brake Systems... rule that amended the Federal motor vehicle safety standard for air brake systems by requiring... published a final rule in the Federal Register amending Federal Motor Vehicle Safety Standard (FMVSS) No...

29 CFR 1960.36 - General provisions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.36 General provisions. (a) The occupational...

29 CFR 1960.36 - General provisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.36 General provisions. (a) The occupational...

29 CFR 1960.40 - Establishment committee duties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.40 Establishment committee...

29 CFR 1960.39 - Agency responsibilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.39 Agency responsibilities. (a) Agencies shall...

29 CFR 1960.40 - Establishment committee duties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.40 Establishment committee...

29 CFR 1960.36 - General provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.36 General provisions. (a) The occupational...

29 CFR 1960.39 - Agency responsibilities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.39 Agency responsibilities. (a) Agencies shall...

29 CFR 1960.40 - Establishment committee duties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.40 Establishment committee...

29 CFR 1960.39 - Agency responsibilities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.39 Agency responsibilities. (a) Agencies shall...

50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false National Standard 10-Safety of Life at Sea... Standards § 600.355 National Standard 10—Safety of Life at Sea. (a) Standard 10. Conservation and management measures shall, to the extent practicable, promote the safety of human life at sea. (b) General. (1...

NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for

Science.gov Websites

Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities December 1, 2017 The U.S vehicle maintenance facilities with a new handbook and webinar that outline safety factors and standards

Advanced operations focused on connected vehicles/infrastructure (CVI-UTC).

DOT National Transportation Integrated Search

2015-12-01

The goal of the Infrastructure Safety Assessment in a Connected Vehicle (CV) Environment : project was to develop a method to identify infrastructure safety hot spots using CV data. : Using these basic safety messages to detect hot spots may al...

System safety engineering analysis handbook

NASA Technical Reports Server (NTRS)

Ijams, T. E.

1972-01-01

The basic requirements and guidelines for the preparation of System Safety Engineering Analysis are presented. The philosophy of System Safety and the various analytic methods available to the engineering profession are discussed. A text-book description of each of the methods is included.

29 CFR 1960.38 - Committee formation.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.38 Committee formation. (a) Upon forming such...

29 CFR 1960.38 - Committee formation.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.38 Committee formation. (a) Upon forming such...

29 CFR 1960.37 - Committee organization.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.37 Committee organization. (a) For agencies which...

29 CFR 1960.41 - National committee duties.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.41 National committee duties. National committees...

29 CFR 1960.41 - National committee duties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.41 National committee duties. National committees...

29 CFR 1960.41 - National committee duties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.41 National committee duties. National committees...

29 CFR 1960.38 - Committee formation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.38 Committee formation. (a) Upon forming such...

29 CFR 1960.37 - Committee organization.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Occupational Safety and Health Committees § 1960.37 Committee organization. (a) For agencies which...

29 CFR 1960.89 - Organization.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS... the appropriate OSHA Regional Office and the Office of Federal Agency Safety and Health Programs of...

29 CFR 1960.90 - Operating procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... representatives of the council. The Office of Federal Agency Safety and Health Programs, OSHA, shall furnish...

29 CFR 1960.89 - Organization.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS... the appropriate OSHA Regional Office and the Office of Federal Agency Safety and Health Programs of...

29 CFR 1960.90 - Operating procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... representatives of the council. The Office of Federal Agency Safety and Health Programs, OSHA, shall furnish...

29 CFR 1960.34 - General provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... affecting Federal employee safety and health. Both agencies shall establish and publish a joint procedure...

Hazard identification and pre-map with a simple specific tool: synthesis of application experience in handicrafts in various productive sectors.

PubMed

Colombini, Daniela; Occhipinti, Enrico; Peluso, Raffaele; Montomoli, Loretta

2012-01-01

In August 2009, an international group was founded with the task of developing a "toolkit for MSD prevention" under the IEA and in collaboration with the World Health Organization.According to the ISO standard 11228 series and the new Draft ISO TR 12259 "Application document guides for the potential user", our group developed a preliminary "mapping" methodology of occupational hazards in the craft industry, supported by software (Excel®, free download on: www.epmresearch.org).The possible users of toolkits are: members of health and safety committees; health and safety representatives; line supervisors; foremen; workers; government representatives; health workers providing basic occupational health services; occupational health and safety specialists.The proposed methodology, using specific key enters and quick assessment criteria, allows a simple ergonomics hazards identification and risk estimation to be made. It is thus possible to decide for which occupational hazards a more exhaustive risk assessment will be necessary and which occupational consultant should be involved (occupational physician, safety engineer, industrial hygienist, etc.).The methodology has been applied in different situations of small and medium craftsmanship Italian enterprises: leather goods, food, technical dental work, production of artistic ceramics and stained glass, beekeeping activities. The results are synthetically reported and discussed in this paper.

Radiation safety considerations with therapeutic 90Y Zevalin.

PubMed

Zhu, Xiaowei

2003-08-01

ABSTRACT Radioimmunotherapy with the 90Y-labeled Zevalin radioimmunoconjugate is a new and promising modality in cancer treatment that combines the targeting power of monoclonal antibodies with the cytotoxicity of localized radiation. 90Y is a pure beta emitter, with different physical characteristics than traditional therapeutic radionuclides such as 131I. It is important that radiation safety professionals understand the characteristics of this radionuclide so that effective radiation safety procedures can be implemented with the Zevalin regimen. Because 90Y is a pure beta emitter, the Zevalin regimen is routinely administered as an outpatient procedure and is administered by using plastic shielding. Once the radioimmunoconjugate has been administered, the risk of radiation exposure to healthcare workers and family members is minimal. The primary route of biologic elimination of 90Y Zevalin is through the urinary system, with approximately 7% of the total activity administered eliminated over the course of 1 wk. Standard universal precautions, which should already be in place in healthcare facilities, should be sufficient to prevent radiation exposure to personnel working with patients who have been treated with Zevalin. Written radiation safety instructions for patients are not required, but basic instructions to the patient and his or her family may help further minimize the risk of radiation exposure and help alleviate patient and family concerns.

Prevalence and determinants of non-standard motorcycle safety helmets amongst food delivery workers in Selangor and Kuala Lumpur.

PubMed

Kulanthayan, S; See, Lai Git; Kaviyarasu, Y; Nor Afiah, M Z

2012-05-01

Almost half of the global traffic crashes involve vulnerable groups such as pedestrian, cyclists and two-wheeler users. The main objective of this study was to determine the factors that influence standard of the safety helmets used amongst food delivery workers by presence of Standard and Industrial Research Institute of Malaysia (SIRIM) certification label. A cross sectional study was conducted amongst 150 food delivery workers from fast food outlets in the vicinity of Selangor and Kuala Lumpur. During observation, safety helmets were classified as standard safety helmet in the presence of SIRIM label and non-standard in the absence of the label. They were approached for questionnaire participation once consent was obtained and were requested to exchange their safety helmet voluntarily with a new one after the interview. Data analysis was carried out using SPSS. Chi square and logistic regression analysis was applied to determine the significance and odds ratio of the variables studied, respectively (penetration test, age, education level, knowledge, crash history, types of safety helmet, marital status and years of riding experience) against the presence of SIRIM label. The response rate for this study was 85.2%. The prevalence of non-standard helmets use amongst fast food delivery workers was 55.3%. Safety helmets that failed the penetration test had higher odds of being non-standard helmets compared with safety helmets passing the test. Types of safety helmet indicated half-shell safety helmets had higher odds to be non-standard safety helmets compared to full-shell safety helmets. Riders with more years of riding experience were in high odds of wearing non-standard safety helmets compared to riders with less riding experience. Non-standard (non-SIRIM approved) helmets were more likely to be half-shell helmets, were more likely to fail the standards penetration test, and were more likely to be worn by older, more experienced riders. The implications of these findings are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

International Society for the Advancement of Cytometry cell sorter biosafety standards.

PubMed

Holmes, Kevin L; Fontes, Benjamin; Hogarth, Philip; Konz, Richard; Monard, Simon; Pletcher, Charles H; Wadley, Robert B; Schmid, Ingrid; Perfetto, Stephen P

2014-05-01

Flow cytometric cell sorting of biological specimens has become prevalent in basic and clinical research laboratories. These specimens may contain known or unknown infectious agents, necessitating precautions to protect instrument operators and the environment from biohazards arising from the use of sorters. To this end the International Society of Analytical Cytology (ISAC) was proactive in establishing biosafety guidelines in 1997 (Schmid et al., Cytometry 1997;28:99-117) and subsequently published revised biosafety standards for cell sorting of unfixed samples in 2007 (Schmid et al., Cytometry Part A J Int Soc Anal Cytol 2007;71A:414-437). Since their publication, these documents have become recognized worldwide as the standard of practice and safety precautions for laboratories performing cell sorting experiments. However, the field of cytometry has progressed since 2007, and the document requires an update. The new Standards provides guidance: (1) for laboratory design for cell sorter laboratories; (2) for the creation of laboratory or instrument specific Standard Operating Procedures (SOP); and (3) on procedures for the safe operation of cell sorters, including personal protective equipment (PPE) and validation of aerosol containment. Published © 2014 Wiley Periodicals Inc.

International Committee for Monitoring Assisted Reproductive Technology (ICMART) and the World Health Organization (WHO) revised glossary of ART terminology, 2009.

PubMed

Zegers-Hochschild, F; Adamson, G D; de Mouzon, J; Ishihara, O; Mansour, R; Nygren, K; Sullivan, E; Vanderpoel, S

2009-11-01

Many definitions used in medically assisted reproduction (MAR) vary in different settings, making it difficult to standardize and compare procedures in different countries and regions. With the expansion of infertility interventions worldwide, including lower resource settings, the importance and value of a common nomenclature is critical. The objective is to develop an internationally accepted and continually updated set of definitions, which would be utilized to standardize and harmonize international data collection, and to assist in monitoring the availability, efficacy, and safety of assisted reproductive technology (ART) being practiced worldwide. Seventy-two clinicians, basic scientists, epidemiologists and social scientists gathered together at the World Health Organization headquarters in Geneva, Switzerland, in December 2008. Several months before, three working groups were established as responsible for terminology in three specific areas: clinical conditions and procedures, laboratory procedures, and outcome measures. Each group reviewed the existing International Committee for Monitoring Assisted Reproductive Technology glossary, made recommendations for revisions and introduced new terms to be considered for glossary expansion. A consensus was reached on 87 terms, expanding the original glossary by 34 terms, which included definitions for numerous clinical and laboratory procedures. Special emphasis was placed in describing outcome measures, such as cumulative delivery rates and other markers of safety and efficacy in ART. Standardized terminology should assist in analysis of worldwide trends in MAR interventions and in the comparison of ART outcomes across countries and regions. This glossary will contribute to a more standardized communication among professionals responsible for ART practice, as well as those responsible for national, regional, and international registries.

The International Committee for Monitoring Assisted Reproductive Technology (ICMART) and the World Health Organization (WHO) Revised Glossary on ART Terminology, 2009.

PubMed

Zegers-Hochschild, F; Adamson, G D; de Mouzon, J; Ishihara, O; Mansour, R; Nygren, K; Sullivan, E; van der Poel, S

2009-11-01

Many definitions used in medically assisted reproduction (MAR) vary in different settings, making it difficult to standardize and compare procedures in different countries and regions. With the expansion of infertility interventions worldwide, including lower resource settings, the importance and value of a common nomenclature is critical. The objective is to develop an internationally accepted and continually updated set of definitions, which would be utilized to standardize and harmonize international data collection, and to assist in monitoring the availability, efficacy, and safety of assisted reproductive technology (ART) being practiced worldwide. Seventy-two clinicians, basic scientists, epidemiologists and social scientists gathered together at the WHO headquarters in Geneva, Switzerland in December, 2008. Several months in advance, three working groups were established which were responsible for terminology in three specific areas: clinical conditions and procedures, laboratory procedures and outcome measures. Each group reviewed the existing ICMART glossary, made recommendations for revisions and introduced new terms to be considered for glossary expansion. A consensus was reached on 87 terms, expanding the original glossary by 34 terms, which included definitions for numerous clinical and laboratory procedures. Special emphasis was placed in describing outcome measures such as cumulative delivery rates and other markers of safety and efficacy in ART. Standardized terminology should assist in analysis of worldwide trends in MAR interventions and in the comparison of ART outcomes across countries and regions. This glossary will contribute to a more standardized communication among professionals responsible for ART practice, as well as those responsible for national, regional and international registries.

Fire safety

Treesearch

Robert H. White; Mark A. Dietenberger

1999-01-01

Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Since basic data on fire behavior of wood products...

Progress Report for Student Research: Fire Safety Skills for Mentally Retarded Children.

ERIC Educational Resources Information Center

Hayden, Mary F.; Lefcowitz, M. Jack

A comprehensive fire safety skills program was evaluated with 32 moderately to mildly retarded adolescents. The program used a fire safety program manual and lessons in basic preventive fire skills, fire safety procedures, and fire escape skills. Across-group comparisons indicated differences in performance between males and females. Fire safety…

Arizona Traffic Safety Education, K-8. Bicycle Safety, Grades K-1.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains nine lessons on sidewalk vehicles and bicycles for use in kindergarten and grade 1. Introductory information provided for the teacher includes basic highway safety concepts, stressing…

Arizona Traffic Safety Education, K-8. Bicycle Safety, Grade 2.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains ten lessons on bicycles for use in grade 2. Introductory information provided for the teacher includes basic highway safety concepts, stressing communication methods for highway users,…

Arizona Traffic Safety Education, K-8. Bicycle Safety, Grade 3.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide for grade 3 contains seven lessons on bicycles and an appendix on conducting a bicycle rodeo. Introductory information provided for the teacher includes basic highway safety concepts, stressing…

Arizona Traffic Safety Education, K-8. Passenger Safety, Grades K-1.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains nine lessons for use in kindergarten and grade 1. Introductory information provided for the teacher includes basic highway safety concepts, stressing communication methods for highway…

29 CFR 1910.5 - Applicability of standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.5 Applicability of standards. (a) Except as provided in... enforce standards or regulations affecting occupational safety or health. (c)(1) If a particular standard...

29 CFR 1910.5 - Applicability of standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.5 Applicability of standards. (a) Except as provided in... enforce standards or regulations affecting occupational safety or health. (c)(1) If a particular standard...

Introduction to Welding.

ERIC Educational Resources Information Center

Fortney, Clarence; Gregory, Mike

This curriculum guide provides six units of instruction on basic welding. Addressed in the individual units of instruction are the following topics: employment opportunities for welders, welding safety and first aid, welding tools and equipment, basic metals and metallurgy, basic math and measuring, and procedures for applying for a welding job.…

Children and Their Basic Needs.

ERIC Educational Resources Information Center

Prince, Debra Lindsey; Howard, Esther M.

2002-01-01

Describes obstacles presented by poverty in the fulfillment of the basic needs of children. Individually addresses Maslow's five basic needs with regard to children reared in poverty: (1) physiological needs; (2) safety needs; (3) belonging and love needs; (4) self-esteem needs; and (5) self-actualization needs. (Author/SD)

Computed tomography, magnetic resonance, and ultrasound imaging: basic principles, glossary of terms, and patient safety.

PubMed

Cogbill, Thomas H; Ziegelbein, Kurt J

2011-02-01

The basic principles underlying computed tomography, magnetic resonance, and ultrasound are reviewed to promote better understanding of the properties and appropriate applications of these 3 common imaging modalities. A glossary of frequently used terms for each technique is appended for convenience. Risks to patient safety including contrast-induced nephropathy, radiation-induced malignancy, and nephrogenic systemic fibrosis are discussed. Copyright © 2011 Elsevier Inc. All rights reserved.

Analysis and comparison of safety models using average daily, average hourly, and microscopic traffic.

PubMed

Wang, Ling; Abdel-Aty, Mohamed; Wang, Xuesong; Yu, Rongjie

2018-02-01

There have been plenty of traffic safety studies based on average daily traffic (ADT), average hourly traffic (AHT), or microscopic traffic at 5 min intervals. Nevertheless, not enough research has compared the performance of these three types of safety studies, and seldom of previous studies have intended to find whether the results of one type of study is transferable to the other two studies. First, this study built three models: a Bayesian Poisson-lognormal model to estimate the daily crash frequency using ADT, a Bayesian Poisson-lognormal model to estimate the hourly crash frequency using AHT, and a Bayesian logistic regression model for the real-time safety analysis using microscopic traffic. The model results showed that the crash contributing factors found by different models were comparable but not the same. Four variables, i.e., the logarithm of volume, the standard deviation of speed, the logarithm of segment length, and the existence of diverge segment, were positively significant in the three models. Additionally, weaving segments experienced higher daily and hourly crash frequencies than merge and basic segments. Then, each of the ADT-based, AHT-based, and real-time models was used to estimate safety conditions at different levels: daily and hourly, meanwhile, the real-time model was also used in 5 min intervals. The results uncovered that the ADT- and AHT-based safety models performed similar in predicting daily and hourly crash frequencies, and the real-time safety model was able to provide hourly crash frequency. Copyright © 2017 Elsevier Ltd. All rights reserved.

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

78 FR 73692 - Revisions to Safety Standards for Infant Bath Seats, Toddler Beds, and Full-Size Baby Cribs

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-09

... standard issued under the Danny Keysar Child Product Safety Notification Act was based, the revision... standard. Section 26(c) of the CPSA also provides that states or political subdivisions of states may apply... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Parts 1215, 1217 and 1219 Revisions to Safety Standards...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2014 CFR

2014-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2011 CFR

2011-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2013 CFR

2013-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2012 CFR

2012-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2010 CFR

2010-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

Future directions in the use of dental implants.

PubMed

Bloem, T J

1989-10-01

Future development in implant prosthodontics should be based on the fundamentals of sound research and reliable clinical implementation. The goals should be to research the safety and efficacy of implants with regard to materials, host receptor site and interfacial zone; to develop acceptable uniform standards of evaluation; and to submit findings to scientific methods of analysis in determining benefit-to-risk factors. This presentation will offer a glimpse at some current developments in basic and clinical research focusing on studies in biocompatability and host acceptance; the implant-tissue interface; processes in osteogenesis related to vascularization of host sites; and bioengineering studies related to stress analysis and dimensional accuracy of impression systems for implants. The presentation will further describe future direction in research, training and implementation of services through development of an interdisciplinary team. A center is proposed to address the need for combined efforts in clinical and basic science research, the broad scope of implant utilization, and the teaching of implant procedures within an academic setting and to our colleagues.

Laser surgery: using the carbon dioxide laser.

PubMed Central

Wright, V. C.

1982-01-01

In 1917 Einstein theorized tha through an atomic process a unique kind of electromagnetic radiation could be produced by stimulated emission. When such radiation is in the optical or infrared spectrum it is termed laser (light amplification by stimulated emission of radiation) light. A laser, a high-intensity light source, emits a nearly parallel electromagnetic beam of energy at a given wavelength that can be captured by a lens and concentrated in the focal spot. The wavelength determines how the laser will be used. The carbon dioxide laser is now successfully employed for some surgical procedures in gynecology, otorhinolaryngology, neurosurgery, and plastic and general surgery. The CO2 laser beam is directed through the viewing system of an operating microscope or through a hand-held laser component. Its basic action in tissue is thermal vaporization; it causes minimal damage to adjacent tissues. Surgeons require special training in the basic methods and techniques of laser surgery, as well as in the safety standards that must be observed. Images FIG. 5 PMID:7074503

Physical layer simulation study for the coexistence of WLAN standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Howlader, M. K.; Keiger, C.; Ewing, P. D.

This paper presents the results of a study on the performance of wireless local area network (WLAN) devices in the presence of interference from other wireless devices. To understand the coexistence of these wireless protocols, simplified physical-layer-system models were developed for the Bluetooth, Wireless Fidelity (WiFi), and Zigbee devices, all of which operate within the 2.4-GHz frequency band. The performances of these protocols were evaluated using Monte-Carlo simulations under various interference and channel conditions. The channel models considered were basic additive white Gaussian noise (AWGN), Rayleigh fading, and site-specific fading. The study also incorporated the basic modulation schemes, multiple accessmore » techniques, and channel allocations of the three protocols. This research is helping the U.S. Nuclear Regulatory Commission (NRC) understand the coexistence issues associated with deploying wireless devices and could prove useful in the development of a technical basis for guidance to address safety-related issues with the implementation of wireless systems in nuclear facilities. (authors)« less

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.78 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.78 Purpose and scope. (a) The...

29 CFR 1960.78 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.78 Purpose and scope. (a) The...

29 CFR 1960.78 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.78 Purpose and scope. (a) The...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

Traceability of Software Safety Requirements in Legacy Safety Critical Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.

2007-01-01

How can traceability of software safety requirements be created for legacy safety critical systems? Requirements in safety standards are imposed most times during contract negotiations. On the other hand, there are instances where safety standards are levied on legacy safety critical systems, some of which may be considered for reuse for new applications. Safety standards often specify that software development documentation include process-oriented and technical safety requirements, and also require that system and software safety analyses are performed supporting technical safety requirements implementation. So what can be done if the requisite documents for establishing and maintaining safety requirements traceability are not available?

Industrial Electronics. Performance Objectives. Basic Course.

ERIC Educational Resources Information Center

Tiffany, Earl

Several intermediate performance objectives and corresponding criterion measures are listed for each of 30 terminal objectives for a two-semester (2 hours daily) high school course in basic industrial electronics. The objectives cover instruction in basic electricity including AC-DC theory, magnetism, electrical safety, care and use of hand tools,…

16 CFR Figure 2 to Part 1203 - ISO Headform-Basic, Reference, and Median Planes

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false ISO Headform-Basic, Reference, and Median Planes 2 Figure 2 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... Headform-Basic, Reference, and Median Planes ER10MR98.002 ...

29 CFR 1956.54 - Location of basic State plan documentation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 1956.54 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Programs, Office of State Programs, U.S. Department of Labor, Occupational Safety and Health Administration..., U.S. Department of Labor, Occupational Safety and Health Administration, 201 Varick Street, Room 670...

29 CFR 1956.54 - Location of basic State plan documentation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 1956.54 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Programs, Office of State Programs, U.S. Department of Labor, Occupational Safety and Health Administration..., U.S. Department of Labor, Occupational Safety and Health Administration, 201 Varick Street, Room 670...

29 CFR 1956.74 - Location of basic State plan documentation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 1956.74 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... of State Programs, U.S. Department of Labor, Occupational Safety and Health Administration, 200.... Department of Labor, Occupational Safety and Health Administration, 201 Varick Street, Room 670, New York...

29 CFR 1956.74 - Location of basic State plan documentation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 1956.74 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... of State Programs, U.S. Department of Labor, Occupational Safety and Health Administration, 200.... Department of Labor, Occupational Safety and Health Administration, 201 Varick Street, Room 670, New York...

29 CFR 1960.85 - Role of the Secretary.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Field Federal Safety and Health Councils § 1960.85 Role of the Secretary. (a) The Secretary shall...

29 CFR 1924.1 - Applicable safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Applicable safety standards. 1924.1 Section 1924.1 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY STANDARDS APPLICABLE TO WORKSHOPS AND REHABILITATION FACILITIES ASSISTED BY GRANTS § 1924...

49 CFR 212.213 - Motive power and equipment (MP&E) inspector.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of determining compliance with all sections of the Freight Car Safety Standards (49 CFR part 215... maintenance standards accepted in the industry; and (ii) The Freight Car Safety Standards, Safety Glazing... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STATE SAFETY PARTICIPATION REGULATIONS State...

49 CFR 212.213 - Motive power and equipment (MP&E) inspector.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of determining compliance with all sections of the Freight Car Safety Standards (49 CFR part 215... maintenance standards accepted in the industry; and (ii) The Freight Car Safety Standards, Safety Glazing... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STATE SAFETY PARTICIPATION REGULATIONS State...

49 CFR 212.213 - Motive power and equipment (MP&E) inspector.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of determining compliance with all sections of the Freight Car Safety Standards (49 CFR part 215... maintenance standards accepted in the industry; and (ii) The Freight Car Safety Standards, Safety Glazing... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STATE SAFETY PARTICIPATION REGULATIONS State...

49 CFR 212.213 - Motive power and equipment (MP&E) inspector.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of determining compliance with all sections of the Freight Car Safety Standards (49 CFR part 215... maintenance standards accepted in the industry; and (ii) The Freight Car Safety Standards, Safety Glazing... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STATE SAFETY PARTICIPATION REGULATIONS State...

Health and safety management systems: liability or asset?

PubMed

Bennett, David

2002-01-01

Health and safety management systems have a background in theory and in various interests among employers and workplace health and safety professionals. These have resulted in a number of national systems emanating from national standard-writing centres and from employers' organizations. In some cases these systems have been recognized as national standards. The contenders for an international standard have been the International Organization of Standardization (ISO) and the International Labour Organization (ILO). The quality and environmental management systems of ISO indicate what an ISO health and safety management standard would look like. The ILO Guidelines on Safety and Health Management Systems, by contrast, are stringent, specific and potentially effective in improving health and safety performance in the workplace.

Fire safety of wood construction

Treesearch

Robert H. White; Mark A. Dietenberger

2010-01-01

Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements and related fire performance data are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Because basic data...

Curriculum and Evaluation Guide for Safety Education Programs. Research and Evaluation Report Series No. 40.00.

ERIC Educational Resources Information Center

Lowry, Carlee S.

Designed to assist Bureau of Indian Affairs school officials in the identification of safety education program needs, this evaluation guide focuses upon the basic operational components in a safety education program. The means for establishing an evaluation design for safety education are presented via a flexible model appropriate for most…

It's No Accident: A Consumer Product Safety Education Curriculum Resource Guide for Teachers of Grades 3 through 6.

ERIC Educational Resources Information Center

Consumer Product Safety Commission, Washington, DC.

This guide for teachers contains product safety information appropriate for young children and suggests learning activities for third through sixth graders. Activities encourage children to examine their home environments for safety hazards and to share this information with family and friends. Unit 1 introduces five basic safety concepts upon…

International Safety Regulation and Standards for Space Travel and Commerce

NASA Astrophysics Data System (ADS)

Pelton, J. N.; Jakhu, R.

The evolution of air travel has led to the adoption of the 1944 Chicago Convention that created the International Civil Aviation Organization (ICAO), headquartered in Montreal, Canada, and the propagation of aviation safety standards. Today, ICAO standardizes and harmonizes commercial air safety worldwide. Space travel and space safety are still at an early stage of development, and the adoption of international space safety standards and regulation still remains largely at the national level. This paper explores the international treaties and conventions that govern space travel, applications and exploration today and analyzes current efforts to create space safety standards and regulations at the national, regional and global level. Recent efforts to create a commercial space travel industry and to license commercial space ports are foreseen as means to hasten a space safety regulatory process.

Embryo transfer: a comparative biosecurity advantage in international movements of germplasm.

PubMed

Thibier, M

2011-04-01

This paper uses cattle as a model to provide an overview of the hazards involved in the transfer of in vivo-derived and in vitro-produced embryos. While scientific studies in recent decades have led to the identification of pathogens that may be associated with both in vivo- and in vitro-derived embryos, those studies have also been the basis of appropriate disease control measures to reduce the risks to a negligible level. These disease control measures have been identified and assessed by the International Embryo Transfer Society's (lETS) Health and Safety Advisory Committee, the expert body that advises the World Organisation for Animal Health (OIE) on matters related to the safety of embryo transfer. Through the OIE's processes for developing and adopting international standards, the disease control measures identified by the IETS have been incorporated into the Terrestrial Animal Health Code. The basic principles rely on the crucial ethical roles of the embryo collection team and embryo transfer team, under the leadership of approved veterinarians. Decades of experience, with nearly 10 million embryos transferred, have demonstrated the very significant biosecurity advantage that embryo transfer technology has when moving germplasm internationally, provided that the international standards developed by the IETS and adopted by the OIE are strictly followed.

49 CFR 659.15 - System safety program standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false System safety program standard. 659.15 Section 659... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.15 System safety program standard. (a) General requirement. Each state...

29 CFR 1910.18 - Changes in established Federal standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 1910.18 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.18 Changes in established Federal standards. Whenever an occupational safety and health...

29 CFR 1910.18 - Changes in established Federal standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 1910.18 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.18 Changes in established Federal standards. Whenever an occupational safety and health...

Help Children--and Families--Learn Basic Fire Safety.

ERIC Educational Resources Information Center

Texas Child Care, 2001

2001-01-01

Presents tips to help early childhood teachers and caregivers teach young children fire safety. Provides checklist for preventing fires in the kitchen, classrooms, and storage areas. Offers suggestions for classroom learning activities and for educating families about fire safety. Includes annotated bibliography of children's books dealing with…

Safety in Riding Programs: A Director's Guide.

ERIC Educational Resources Information Center

Kpachavi, Teresa

1996-01-01

Camp riding programs should be examined regularly for liability and risk management issues. Elements of a basic safety assessment include requiring proper safety apparel, removing obstructions from riding rings, ensuring doors and gates are closed, requiring use of lead ropes, securing equine medications, banning smoking, posting written…

How Much Safety Do We Need in ChE Education?

ERIC Educational Resources Information Center

Mewis, Jan

1984-01-01

Discusses aims, objectives, and content of a safety course for chemical engineering students. Course emphasizes awareness of hazards, basic concepts and principles of safety engineering, and the ability to recognize, assess, and remedy specific risks occurring in chemical plants. Course implementation is also discussed. (JN)

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2014 CFR

2014-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2013 CFR

2013-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2012 CFR

2012-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

78 FR 18965 - Submission for OMB Review; Comment Request: Safety Standard for Cigarette Lighters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-28

... Request: Safety Standard for Cigarette Lighters AGENCY: Consumer Product Safety Commission. ACTION: Notice... Commission's safety standard for cigarette lighters, 16 CFR part 1210. DATES: Written comments on this... Cigarette Lighters, 16 CFR part 1210. One comment was received in response to that notice. The commenter...

75 FR 38172 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-01

... requirements of its safety standards. The individual petition is described below, including the party seeking... European safety standards for crash-worthiness and related safety measures for use on its proposed high... certain requirements of 49 CFR part 238, Passenger Equipment Safety Standards (Sec. Sec. 238.115, 238.121...

76 FR 52231 - Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-22

... Standards Service Aviation Safety Inspectors AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... responsible for the oversight of, a Flight Standards Service Aviation Safety Inspector, and had direct... . SUPPLEMENTARY INFORMATION: Authority for This Rulemaking The FAA's authority to issue rules on aviation safety...

Powassan (POW) Virus Basics

MedlinePlus

... Coverage Injury, Violence & Safety Life Stages & Populations Policy, Economics & Legislation Prevention & Healthy Living ABOUT US search input ... Coverage Injury, Violence & Safety Life Stages & Populations Policy, Economics & Legislation Prevention & Healthy Living Search the Site Home ...

Criticality Safety Basics for INL FMHs and CSOs

DOE Office of Scientific and Technical Information (OSTI.GOV)

V. L. Putman

2012-04-01

Nuclear power is a valuable and efficient energy alternative in our energy-intensive society. However, material that can generate nuclear power has properties that require this material be handled with caution. If improperly handled, a criticality accident could result, which could severely harm workers. This document is a modular self-study guide about Criticality Safety Principles. This guide's purpose it to help you work safely in areas where fissionable nuclear materials may be present, avoiding the severe radiological and programmatic impacts of a criticality accident. It is designed to stress the fundamental physical concepts behind criticality controls and the importance of criticalitymore » safety when handling fissionable materials outside nuclear reactors. This study guide was developed for fissionable-material-handler and criticality-safety-officer candidates to use with related web-based course 00INL189, BEA Criticality Safety Principles, and to help prepare for the course exams. These individuals must understand basic information presented here. This guide may also be useful to other Idaho National Laboratory personnel who must know criticality safety basics to perform their assignments safely or to design critically safe equipment or operations. This guide also includes additional information that will not be included in 00INL189 tests. The additional information is in appendices and paragraphs with headings that begin with 'Did you know,' or with, 'Been there Done that'. Fissionable-material-handler and criticality-safety-officer candidates may review additional information at their own discretion. This guide is revised as needed to reflect program changes, user requests, and better information. Issued in 2006, Revision 0 established the basic text and integrated various programs from former contractors. Revision 1 incorporates operation and program changes implemented since 2006. It also incorporates suggestions, clarifications, and additional information from readers and from personnel who took course 00INL189. Revision 1 also completely reorganized the training to better emphasize physical concepts behind the criticality controls that fissionable material handlers and criticality safety officers must understand. The reorganization is based on and consistent with changes made to course 00INL189 due to a review of course exam results and to discussions with personnel who conduct area-specific training.« less

On the choice of farm management practices after the reform of the Common Agricultural Policy in 2003.

PubMed

Schmid, Erwin; Sinabell, Franz

2007-02-01

The Common Agricultural Policy (CAP) was fundamentally reformed in 2003. From 2005, farmers will receive decoupled income support payments instead of production premiums if basic standards for environment, food safety, animal health and welfare are met. Farmers are likely to adjust production and management practices to the new policy framework. We describe how this reform fits into the EU strategy of making agricultural production more environmentally friendly by concentrating on the financial aspects of the reforms. Using an agricultural sector model for Austria, we show that the reform will further decrease agricultural outputs, reduce farm inputs, lessen nitrogen surpluses and make environmentally friendly management practices more attractive for farmers.

EC Project 'GUIDELINES ON MPE': proposed qualification and curriculum frameworks and the MPE in nuclear medicine

NASA Astrophysics Data System (ADS)

Caruana, C. J.

2011-09-01

The objectives of EC project 'Guidelines on Medical Physics Expert' are to provide for improved implementation of the provisions relating to the Medical Physics Expert within Council Directive 97/43/EURATOM and the proposed recast Basic Safety Standards directive. This includes harmonisation of the mission statement for Medical Physics Services as well as the education and training of the MPE. It also includes detailed knowledge-skills-competence inventories for the Medical Physics Expert in each of Diagnostic and Interventional Radiology, Nuclear Medicine and Radiotherapy. This paper presents the proposed Qualification and Curriculum Frameworks and their application to the Medical Physics Expert in Nuclear Medicine.

[The basic needs of the spouses of infarct patients in the acute phase of the treatment].

PubMed

Takahashi, E I; da Silva, C A; Guerra, G M

1990-04-01

The purpose of this study was to identify the basic needs of the spouses of patients with myocardial infarction. The concepts of basic needs from Maslow were used as conceptual framework. The data's analysis showed the following needs affections of this population: safety, belongingness and love, esteem.

Texas Boating Basics: A Course in Better Boating. Fifth Edition.

ERIC Educational Resources Information Center

Texas State Dept. of Parks and Wildlife, Austin.

This student manual and teacher's guide on boating provides basic information of boating laws, boat types, and boat operation. Part I includes information on types of boats, boat hulls, and motors. Part II covers what is legally required regarding registration of boats and equipment. Part III discusses basic safety regulations, navigation rules,…

76 FR 70885 - Updating Fire Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 59 RIN 2900-AN57 Updating Fire Safety Standards AGENCY... Fire Protection Association (NFPA) 101. This rule helps ensure the safety of veterans in the affected... publications are: NFPA 10, Standard for Portable Fire Extinguishers; NFPA 99, Standard for Health Care...

Teach Children Fire Will Burn.

ERIC Educational Resources Information Center

Children's Bureau (DHEW), Washington, DC.

This handbook, addressed to parents and others responsible for the safety of children, presents information on fire hazards, prevention and protection. Emphasizing an early start to fire safety training, it outlines the basic facts of fire safety education, listing the most frequent causes of fire and suggesting the organization of a Family Fire…

29 CFR 1910.144 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the basic color for the identification of: (i) Fire protection equipment and apparatus. [Reserved] (ii... 29 Labor 5 2011-07-01 2011-07-01 false Safety color code for marking physical hazards. 1910.144 Section 1910.144 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH...

CPR in Basic Health Education.

ERIC Educational Resources Information Center

Foulk, David; And Others

1979-01-01

The American Heart Association's Heartsaver Program, including instruction in cardiopulmonary resuscitation skills, has been integrated into the basic Personal Health and Safety course at the University of Arkansas. An outline of the course content is provided. (JMF)

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2013 CFR

2013-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2012 CFR

2012-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2014 CFR

2014-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2011 CFR

2011-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2010 CFR

2010-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

Assuring Rural Hospital Patient Safety: What Should Be the Priorities?

ERIC Educational Resources Information Center

Coburn, Andrew F.; Wakefield, Mary; Casey, Michelle; Moscovice, Ira; Payne, Susan; Loux, Stephenie

2004-01-01

Context: Since reports on patient safety were issued by the Institute of Medicine, a number of interventions have been recommended and standards designed to improve hospital patient safety, including the Leapfrog, evidence-based safety standards. These standards are based on research conducted largely in urban hospitals, and it may not be possible…

49 CFR 571.224 - Standard No. 224; Rear impact protection.

Code of Federal Regulations, 2014 CFR

2014-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE SAFETY STANDARDS Federal Motor Vehicle Safety Standards § 571.224 Standard No. 224; Rear impact protection. S1. Scope. This... motor vehicle, as defined in 49 CFR 171.8, is certified to carry hazardous materials and has a rear...

49 CFR 571.224 - Standard No. 224; Rear impact protection.

Code of Federal Regulations, 2012 CFR

2012-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE SAFETY STANDARDS Federal Motor Vehicle Safety Standards § 571.224 Standard No. 224; Rear impact protection. S1. Scope. This... motor vehicle, as defined in 49 CFR 171.8, is certified to carry hazardous materials and has a rear...

49 CFR 571.224 - Standard No. 224; Rear impact protection.

Code of Federal Regulations, 2013 CFR

2013-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE SAFETY STANDARDS Federal Motor Vehicle Safety Standards § 571.224 Standard No. 224; Rear impact protection. S1. Scope. This... motor vehicle, as defined in 49 CFR 171.8, is certified to carry hazardous materials and has a rear...

Implementing local agency safety management

DOT National Transportation Integrated Search

2003-12-17

For local agencies to mount a successful effort toward reducing motor vehicle collisions and their costs, an effective systematic approach must be taken. A Safety Management System (SMS) has two basic components: a collaborative information exchange ...

Preventing food poisoning

MedlinePlus

... US Food & Drug Administration. 4 basic steps to food safety at home. www.fda.gov/downloads/forconsumers/byaudience/ ... and the A.D.A.M. Editorial team. Food Safety Read more NIH MedlinePlus Magazine Read more Health ...

International Society for Analytical Cytology biosafety standard for sorting of unfixed cells.

PubMed

Schmid, Ingrid; Lambert, Claude; Ambrozak, David; Marti, Gerald E; Moss, Delynn M; Perfetto, Stephen P

2007-06-01

Cell sorting of viable biological specimens has become very prevalent in laboratories involved in basic and clinical research. As these samples can contain infectious agents, precautions to protect instrument operators and the environment from hazards arising from the use of sorters are paramount. To this end the International Society of Analytical Cytology (ISAC) took a lead in establishing biosafety guidelines for sorting of unfixed cells (Schmid et al., Cytometry 1997;28:99-117). During the time period these recommendations have been available, they have become recognized worldwide as the standard practices and safety precautions for laboratories performing viable cell sorting experiments. However, the field of cytometry has progressed since 1997, and the document requires an update. Initially, suggestions about the document format and content were discussed among members of the ISAC Biosafety Committee and were incorporated into a draft version that was sent to all committee members for review. Comments were collected, carefully considered, and incorporated as appropriate into a draft document that was posted on the ISAC web site to invite comments from the flow cytometry community at large. The revised document was then submitted to ISAC Council for review. Simultaneously, further comments were sought from newly-appointed ISAC Biosafety committee members. This safety standard for performing viable cell sorting experiments was recently generated. The document contains background information on the biohazard potential of sorting and the hazard classification of infectious agents as well as recommendations on (1) sample handling, (2) operator training and personal protection, (3) laboratory design, (4) cell sorter set-up, maintenance, and decontamination, and (5) testing the instrument for the efficiency of aerosol containment. This standard constitutes an updated and expanded revision of the 1997 biosafety guideline document. It is intended to provide laboratories involved in cell sorting with safety practices that take into account the enhanced hazard potential of high-speed sorting. Most importantly, it states that droplet-based sorting of infectious or hazardous biological material requires a higher level of containment than the one recommended for the risk group classification of the pathogen. The document also provides information on safety features of novel instrumentation, new options for personal protective equipment, and recently developed methods for testing the efficiency of aerosol containment.

Ethics and choosing appropriate means to an end: problems with coal mine and nuclear workplace safety.

PubMed

Shrader-Frechette, Kristin; Cooke, Roger

2004-02-01

A common problem in ethics is that people often desire an end but fail to take the means necessary to achieve it. Employers and employees may desire the safety end mandated by performance standards for pollution control, but they may fail to employ the means, specification standards, necessary to achieve this end. This article argues that current (de jure) performance standards, for lowering employee exposures to ionizing radiation, fail to promote de facto worker welfare, in part because employers and employees do not follow the necessary means (practices known as specification standards) to achieve the end (performance standards) of workplace safety. To support this conclusion, the article argues that (1) safety requires attention to specification, as well as performance, standards; (2) coal-mine specification standards may fail to promote performance standards; (3) nuclear workplace standards may do the same; (4) choosing appropriate means to the end of safety requires attention to the ways uncertainties and variations in exposure may mask violations of standards; and (5) correcting regulatory inattention to differences between de jure and de facto is necessary for achievement of ethical goals for safety.

Assessment of Safety Standards for Automotive Electronic Control Systems

DOT National Transportation Integrated Search

2016-06-01

This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

Designing an evaluation framework for WFME basic standards for medical education.

PubMed

Tackett, Sean; Grant, Janet; Mmari, Kristin

2016-01-01

To create an evaluation plan for the World Federation for Medical Education (WFME) accreditation standards for basic medical education. We conceptualized the 100 basic standards from "Basic Medical Education: WFME Global Standards for Quality Improvement: The 2012 Revision" as medical education program objectives. Standards were simplified into evaluable items, which were then categorized as inputs, processes, outputs and/or outcomes to generate a logic model and corresponding plan for data collection. WFME standards posed significant challenges to evaluation due to complex wording, inconsistent formatting and lack of existing assessment tools. Our resulting logic model contained 244 items. Standard B 5.1.1 separated into 24 items, the most for any single standard. A large proportion of items (40%) required evaluation of more than one input, process, output and/or outcome. Only one standard (B 3.2.2) was interpreted as requiring evaluation of a program outcome. Current WFME standards are difficult to use for evaluation planning. Our analysis may guide adaptation and revision of standards to make them more evaluable. Our logic model and data collection plan may be useful to medical schools planning an institutional self-review and to accrediting authorities wanting to provide guidance to schools under their purview.

Basic Program Elements for Federal employee Occupational Safety and Health Programs and related matters; Subpart I for Recordkeeping and Reporting Requirements. Final rule.

PubMed

2013-08-05

OSHA is issuing a final rule amending the Basic Program Elements to require Federal agencies to submit their occupational injury and illness recordkeeping information to the Bureau of Labor Statistics (BLS) and OSHA on an annual basis. The information, which is already required to be created and maintained by Federal agencies, will be used by BLS to aggregate injury and illness information throughout the Federal government. OSHA will use the information to identify Federal establishments with high incidence rates for targeted inspection, and assist in determining the most effective safety and health training for Federal employees. The final rule also interprets several existing basic program elements in our regulations to clarify requirements applicable to Federal agencies, amends the date when Federal agencies must submit to the Secretary of Labor their annual report on occupational safety and health programs, amends the date when the Secretary of Labor must submit to the President the annual report on Federal agency safety and health, and clarifies that Federal agencies must include uncompensated volunteers when reporting and recording occupational injuries and illnesses.

Planning the Unplanned Experiment: Assessing the Efficacy of Standards for Safety Critical Software

NASA Technical Reports Server (NTRS)

Graydon, Patrick J.; Holloway, C. Michael

2015-01-01

We need well-founded means of determining whether software is t for use in safety-critical applications. While software in industries such as aviation has an excellent safety record, the fact that software aws have contributed to deaths illustrates the need for justi ably high con dence in software. It is often argued that software is t for safety-critical use because it conforms to a standard for software in safety-critical systems. But little is known about whether such standards `work.' Reliance upon a standard without knowing whether it works is an experiment; without collecting data to assess the standard, this experiment is unplanned. This paper reports on a workshop intended to explore how standards could practicably be assessed. Planning the Unplanned Experiment: Assessing the Ecacy of Standards for Safety Critical Software (AESSCS) was held on 13 May 2014 in conjunction with the European Dependable Computing Conference (EDCC). We summarize and elaborate on the workshop's discussion of the topic, including both the presented positions and the dialogue that ensued.

AeroMACS system characterization and demonstrations

NASA Astrophysics Data System (ADS)

Kerczewski, R. J.; Apaza, R. D.; Dimond, R. P.

This The Aeronautical Mobile Airport Communications System (AeroMACS) is being developed to provide a new broadband wireless communications capability for safety critical communications in the airport surface domain, providing connectivity to aircraft and other ground vehicles as well as connections between other critical airport fixed assets. AeroMACS development has progressed from requirements definition through technology definition, prototype deployment and testing, and now into national and international standards development. The first prototype AeroMACS system has been deployed at the Cleveland Hopkins International Airport (CLE) and the adjacent NASA Glenn Research Center (GRC). During the past three years, extensive technical testing has taken place to characterize the performance of the AeroMACS prototype and provide technical support for the standards development process. The testing has characterized AeroMACS link and network performance over a variety of conditions for both fixed and mobile data transmission and has included basic system performance testing and fixed and mobile applications testing. This paper provides a summary of the AeroMACS performance testing and the status of standardization activities that the testing supports.

AeroMACS System Characterization and Demonstrations

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.; Apaza, Rafael D.; Dimond, Robert P.

2013-01-01

This The Aeronautical Mobile Airport Communications System (AeroMACS) is being developed to provide a new broadband wireless communications capability for safety critical communications in the airport surface domain, providing connectivity to aircraft and other ground vehicles as well as connections between other critical airport fixed assets. AeroMACS development has progressed from requirements definition through technology definition, prototype deployment and testing, and now into national and international standards development. The first prototype AeroMACS system has been deployed at the Cleveland Hopkins International Airport (CLE) and the adjacent NASA Glenn Research Center (GRC). During the past 3 years, extensive technical testing has taken place to characterize the performance of the AeroMACS prototype and provide technical support for the standards development process. The testing has characterized AeroMACS link and network performance over a variety of conditions for both fixed and mobile data transmission and has included basic system performance testing and fixed and mobile applications testing. This paper provides a summary of the AeroMACS performance testing and the status of standardization activities that the testing supports.

AeroMACS System Characterization and Demonstrations

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.; Apaza, Rafael D.; Dimond, Robert P.

2013-01-01

The Aeronautical Mobile Airport Communications System (AeroMACS) is being developed to provide a new broadband wireless communications capability for safety critical communications in the airport surface domain, providing connectivity to aircraft and other ground vehicles as well as connections between other critical airport fixed assets. AeroMACS development has progressed from requirements definition through technology definition, prototype deployment and testing, and now into national and international standards development. The first prototype AeroMACS system has been deployed at the Cleveland Hopkins International Airport (CLE) and the adjacent NASA Glenn Research Center (GRC). During the past three years, extensive technical testing has taken place to characterize the performance of the AeroMACS prototype and provide technical support for the standards development process. The testing has characterized AeroMACS link and network performance over a variety of conditions for both fixed and mobile data transmission and has included basic system performance testing and fixed and mobile applications testing. This paper provides a summary of the AeroMACS performance testing and the status of standardization activities that the testing supports.

A Standardized Shift Handover Protocol: Improving Nurses’ Safe Practice in Intensive Care Units

PubMed Central

Malekzadeh, Javad; Mazluom, Seyed Reza; Etezadi, Toktam; Tasseri, Alireza

2013-01-01

Introduction: For maintaining the continuity of care and improving the quality of care, effective inter-shift information communication is necessary. Any handover error can endanger patient safety. Despite the importance of shift handover, there is no standard handover protocol in our healthcare settings. Methods: In this one-group pretest-posttest quasi-experimental study conducted in spring and summer of 2011, we recruited a convenience sample of 56 ICU nurses. The Nurses’ Safe Practice Evaluation Checklist was used for data collection. The Content Validity Index and the inter-rater correlation coefficient of the checklist was 0.92 and 89, respectively. We employed the SPSS 11.5 software and the Mc Nemar and paired-samples t test for data analysis. Results: Study findings revealed that nurses’ mean score on the Safe Practice Evaluation Checklist increased significantly from 11.6 (2.7) to 17.0 (1.8) (P < 0.001). Conclusion: using a standard handover protocol for communicating patient’s needs and information improves nurses’ safe practice in the area of basic nursing care. PMID:25276725

A system safety model for developmental aircraft programs

NASA Technical Reports Server (NTRS)

Amberboy, E. J.; Stokeld, R. L.

1982-01-01

Basic tenets of safety as applied to developmental aircraft programs are presented. The integration of safety into the project management aspects of planning, organizing, directing and controlling is illustrated by examples. The basis for project management use of safety and the relationship of these management functions to 'real-world' situations is presented. The rationale which led to the safety-related project decision and the lessons learned as they may apply to future projects are presented.

76 FR 24561 - Railroad Safety Advisory Committee; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

... Passenger Hours of Service, Training Standards, Track Safety Standards, Dark Territory, Passenger Safety... FRA on railroad safety matters. The RSAC is composed of 54 voting representatives from 31 member...

29 CFR 5.15 - Limitations, variations, tolerances, and exemptions under the Contract Work Hours and Safety...

Code of Federal Regulations, 2010 CFR

2010-07-01

... the Contract Work Hours and Safety Standards Act. 5.15 Section 5.15 Labor Office of the Secretary of... WORK HOURS AND SAFETY STANDARDS ACT) Davis-Bacon and Related Acts Provisions and Procedures § 5.15 Limitations, variations, tolerances, and exemptions under the Contract Work Hours and Safety Standards Act. (a...

77 FR 22564 - Proposed Collection; Comment Request; Safety Standards for Full-Size Baby Cribs and Non-Full-Size...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-16

... child care centers' compliance with the recent CPSC safety standards for full-size and non-full-size... CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC-2012-0019] Proposed Collection; Comment Request; Safety Standards for Full- Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY...

29 CFR 1910.17 - Effective dates.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.17... Harbor Workers' Compensation Act, that occupational safety and health standard as incorporated by...

29 CFR 1910.17 - Effective dates.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.17... Harbor Workers' Compensation Act, that occupational safety and health standard as incorporated by...

76 FR 22019 - Safety Standard for Toddler Beds

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

... warnings should increase consumers' understanding of the connection between the relevant behaviors and... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1217 RIN 3041-AC79 Safety Standard for Toddler Beds AGENCY: Consumer Product Safety Commission. ACTION: Final rule. SUMMARY: The Consumer Product Safety...

75 FR 22303 - Safety Standard for Bassinets and Cradles: Notice of Proposed Rulemaking

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-28

... an infant's development. Once an infant can push up by him/herself, a number of hazards are created... ``Commission'') to promulgate consumer product safety standards for durable infant or toddler products. These... product safety standards for durable infant or toddler products. These standards are to be ``substantially...

50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Sea. 600.355 Section 600.355 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL... Standards § 600.355 National Standard 10—Safety of Life at Sea. (a) Standard 10. Conservation and management measures shall, to the extent practicable, promote the safety of human life at sea. (b) General. (1...

77 FR 71752 - Federal Motor Vehicle Safety Standards; Lamps, Reflective Devices, and Associated Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-04

... [Docket No. NHTSA-2012-0174] RIN 2127-Al27 Federal Motor Vehicle Safety Standards; Lamps, Reflective... less than 30 feet in overall length, to the Federal motor vehicle safety standard (FMVSS) on lamps... final rule reorganizing the standard on December 4, 2007. DATES: Comments to this proposal must be...

20 CFR 725.520 - Computation of benefits.

Code of Federal Regulations, 2011 CFR

2011-04-01

... FEDERAL MINE SAFETY AND HEALTH ACT, AS AMENDED Payment of Benefits Benefit Rates § 725.520 Computation of benefits. (a) Basic rate. The amount of benefits payable to a beneficiary for a month is determined, in the first instance, by computing the “basic rate.” The basic rate is equal to 371/2 percent of the monthly...

20 CFR 725.520 - Computation of benefits.

Code of Federal Regulations, 2010 CFR

2010-04-01

... MINE SAFETY AND HEALTH ACT, AS AMENDED Payment of Benefits Benefit Rates § 725.520 Computation of benefits. (a) Basic rate. The amount of benefits payable to a beneficiary for a month is determined, in the first instance, by computing the “basic rate.” The basic rate is equal to 371/2 percent of the monthly...

International perspectives on food safety and regulations - a need for harmonized regulations: perspectives in China.

PubMed

Liu, Xiumei

2014-08-01

Food safety is a major livelihood issue and a priority concern in China. Since the Food Safety Law of the People's Republic of China was issued in 2009, the food safety control system has been strengthened through, inter alia, the Food Safety Risk Surveillance System, the Food Safety Risk Assessment System and the Food Safety Standards System. In accordance with the Food Safety Law and regulations for implementation, the Ministry of Health released the 'Twelfth Five-year Plan' of Food Safety Standards. The existing 5000 food-related standards will be integrated. Notwithstanding, the supervision system in China needs to be further improved and strengthened. © 2014 Society of Chemical Industry.

29 CFR 1960.70 - Reporting of serious accidents.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH... multiple hospitalization incidents to OSHA under 29 CFR 1904.39. ...

29 CFR 1960.70 - Reporting of serious accidents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH... multiple hospitalization incidents to OSHA under 29 CFR 1904.39. ...

Countermeasures that work : seventh edition : traffic tech.

DOT National Transportation Integrated Search

2013-04-01

The National Highway Traffic Safety Administration has published the seventh edition of Countermeasures That Work. The guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting effective, evidence-based countermeasures fo...

Evaluation of the Washington nighttime seat belt enforcement program.

DOT National Transportation Integrated Search

2017-04-01

The Washington Traffic Safety Commission (WTSC) and the National Highway Traffic Safety Administration (NHTSA) : conducted a high-visibility Nighttime Seat Belt Enforcement (NTSBE) program in Washington. The two-year program : followed the basic Clic...

Connoted hazard and perceived importance of fluorescent, neon, and standard safety colors.

PubMed

Zielinska, O A; Mayhorn, C B; Wogalter, M S

2017-11-01

The perceived hazard and rated importance of standard safety, fluorescent, and neon colors are investigated. Colors are used in warnings to enhance hazard communication. Red has consistently been rated as the highest in perceived hazard. Orange, yellow, and black are the next highest in connoted hazard; however, there is discrepancy in their ordering. Safety standards, such as ANSI Z535.1, also list colors to convey important information, but little research has examined the perceived importance of colors. In addition to standard safety colors, fluorescent colors are more commonly used in warnings. Understanding hazard and importance perceptions of standard safety and fluorescent colors is necessary to create effective warnings. Ninety participants rated and ranked a total of 33 colors on both perceived hazard and perceived importance. Rated highest were the safety red colors from the American National Standard Institute (ANSI), International Organization for Standardization (ISO), and Federal Highway Administration (FHWA) together with three fluorescent colors (orange, yellow, and yellow-green) from 3 M on both dimensions. Rankings were similar to ratings except that fluorescent orange was the highest on perceived hazard, while fluorescent orange and safety red from the ANSI were ranked as the highest in perceived importance. Fluorescent colors convey hazard and importance levels as high as the standard safety red colors. Implications for conveying hazard and importance in warnings through color are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Integration of Behaviour-Based Safety Programme into Engineering Laboratories and Workshops Conceptually

ERIC Educational Resources Information Center

Koo, Kean Eng; Zain, Ahmad Nurulazam Md; Zainal, Siti Rohaida Mohamed

2012-01-01

The purpose of this conceptual research framework is to develop and integrate a safety training model using a behaviour-based safety training programme into laboratories for young adults, during their tertiary education, particularly in technical and vocational education. Hence, this research will be investigating the outcome of basic safety…

29 CFR 1910.144 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 5 2013-07-01 2013-07-01 false Safety color code for marking physical hazards. 1910.144... § 1910.144 Safety color code for marking physical hazards. (a) Color identification—(1) Red. Red shall be the basic color for the identification of: (i) Fire protection equipment and apparatus. [Reserved] (ii...

29 CFR 1910.144 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 5 2014-07-01 2014-07-01 false Safety color code for marking physical hazards. 1910.144... § 1910.144 Safety color code for marking physical hazards. (a) Color identification—(1) Red. Red shall be the basic color for the identification of: (i) Fire protection equipment and apparatus. [Reserved] (ii...

29 CFR 1910.144 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 5 2012-07-01 2012-07-01 false Safety color code for marking physical hazards. 1910.144... § 1910.144 Safety color code for marking physical hazards. (a) Color identification—(1) Red. Red shall be the basic color for the identification of: (i) Fire protection equipment and apparatus. [Reserved] (ii...

29 CFR 1910.144 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Safety color code for marking physical hazards. 1910.144... § 1910.144 Safety color code for marking physical hazards. (a) Color identification—(1) Red. Red shall be... basic color for designating caution and for marking physical hazards such as: Striking against...

Agricultural Safety. FMO: Fundamentals of Machine Operation. Second Edition.

ERIC Educational Resources Information Center

John Deere Co., Moline, IL.

This manual is intended to provide students with basic information on the safe operation of farm machinery. The following topics are covered in the individual chapters: safe farm machinery operation (the importance of safety, the role of communication in safety, and types of farm accidents); human factors (human limitations and capabilities;…

78 FR 29392 - Embedded Digital Devices in Safety-Related Systems, Systems Important to Safety, and Items Relied...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-20

... NUCLEAR REGULATORY COMMISSION [NRC-2013-0098] Embedded Digital Devices in Safety-Related Systems... (NRC) is issuing for public comment Draft Regulatory Issue Summary (RIS) 2013-XX, ``Embedded Digital... requirements for the quality and reliability of basic components with embedded digital devices. DATES: Submit...

30 CFR 57.22002 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Safety Standards for Methane in... delay connectors. [A copy of Title 49 is available at any Metal and Nonmetal Mine Safety and Health...

30 CFR 57.22002 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Safety Standards for Methane in... delay connectors. [A copy of Title 49 is available at any Metal and Nonmetal Mine Safety and Health...

30 CFR 57.22002 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Safety Standards for Methane in... delay connectors. [A copy of Title 49 is available at any Metal and Nonmetal Mine Safety and Health...

30 CFR 57.22002 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Safety Standards for Methane in... delay connectors. [A copy of Title 49 is available at any Metal and Nonmetal Mine Safety and Health...

29 CFR 1910.16 - Longshoring and marine terminals.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.16 Longshoring and marine terminals. (a) Safety and health standards for longshoring. (1...

29 CFR 1910.16 - Longshoring and marine terminals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.16 Longshoring and marine terminals. (a) Safety and health standards for longshoring. (1...

47 CFR 87.19 - Basic eligibility.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Applications and Licenses § 87.19 Basic eligibility. (a) General. Foreign governments or their representatives cannot hold station licenses. (b) Aeronautical enroute and aeronautical fixed stations. The following...

48 CFR 22.403-3 - Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Contract Work Hours and... Standards for Contracts Involving Construction 22.403-3 Contract Work Hours and Safety Standards Act. The Contract Work Hours and Safety Standards Act (40 U.S.C. 3701 et seq.) requires that certain contracts (see...

77 FR 45242 - Revisions to Safety Standards for Durable Infant or Toddler Products: Infant Bath Seats and Full...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-31

... direction in the Danny Keysar Child Product Safety Notification Act to issue standards for durable infant or... not usually subject to CPSC's standards, such as child care facilities, family child care homes, and... standard issued under the Danny Keysar Child Product Safety Notification Act was based, the revision...

77 FR 63800 - Proposed Extension of Approval of Information Collection; Comment Request-Safety Standard for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-17

... CONSUMER PRODUCT SAFETY COMMISSION Proposed Extension of Approval of Information Collection; Comment Request--Safety Standard for Walk-Behind Power Lawn Mowers AGENCY: Consumer Product Safety.... Chapter 35), the Consumer Product Safety Commission (CPSC) requested comments on a proposed extension of...

30 CFR 75.1 - Scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES General § 75.1 Scope. This part 75 sets forth safety standards compliance with which is mandatory in each underground coal mine subject to the Federal Mine Safety and Health Act...

30 CFR 75.1 - Scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES General § 75.1 Scope. This part 75 sets forth safety standards compliance with which is mandatory in each underground coal mine subject to the Federal Mine Safety and Health Act...

30 CFR 75.1 - Scope.

Code of Federal Regulations, 2012 CFR

2012-07-01

... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES General § 75.1 Scope. This part 75 sets forth safety standards compliance with which is mandatory in each underground coal mine subject to the Federal Mine Safety and Health Act...

30 CFR 75.1 - Scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES General § 75.1 Scope. This part 75 sets forth safety standards compliance with which is mandatory in each underground coal mine subject to the Federal Mine Safety and Health Act...

30 CFR 75.1 - Scope.

Code of Federal Regulations, 2014 CFR

2014-07-01

... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES General § 75.1 Scope. This part 75 sets forth safety standards compliance with which is mandatory in each underground coal mine subject to the Federal Mine Safety and Health Act...

78 FR 52848 - Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-27

... [Docket No.: FAA-2012-0953] Occupational Safety and Health Standards for Aircraft Cabin Crewmembers AGENCY... regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration. This policy statement will enhance occupational safety and...

76 FR 51058 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-17

... CFR part 48 training plan to the Metal/ Nonmetal Safety and Health District Manager. In addition to... DEPARTMENT OF LABOR Mine Safety and Health Administration Petitions for Modification of Application of Existing Mandatory Safety Standards AGENCY: Mine Safety and Health Administration, Labor...

75 FR 22317 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-28

... 1300 [Docket No. NHTSA-2010-0054] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of..., multipurpose passenger vehicles, trucks, buses, trailers, incomplete vehicles, motorcycles, and motor vehicle...

77 FR 69586 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-20

... [Docket No. NHTSA-2012-0155] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of..., multipurpose passenger vehicles, trucks, buses, trailers, motorcycles, and motor vehicle equipment. DATES: You...

16 CFR 1203.3 - Referenced documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Referenced documents. 1203.3 Section 1203.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... international standard, it has become a consensus national standard because all recent major voluntary standards...

29 CFR 1910.11 - Scope and purpose.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.11... to safety or health are adopted by any incorporations by reference of standards prescribed elsewhere...

29 CFR 1910.11 - Scope and purpose.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.11... to safety or health are adopted by any incorporations by reference of standards prescribed elsewhere...

29 CFR 1910.12 - Construction work.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.12... occupational safety and health standards under section 6 of the Act and shall apply, according to the...

The conception of fashion products for children: reflections on safety parameters.

PubMed

Prete, Lígia Gomes Pereira; Emidio, Lucimar de Fátima Bilmaia; Martins, Suzana Barreto

2012-01-01

The purpose of this study is to reflect on safety requirements for children's clothing, based on the standardization proposed by the ABNT (Technical Standardization Brazilian Association). Bibliographic research and case studies were considered on writing this work. We also discuss the importance of adding other safety requirements to the current standardization, as well as the increasing of the actual age range specified by the ABNT, following the children's clothing safety standardizations in Portugal and the United States, also stated here.

29 CFR 1910.309-1910.330 - [Reserved

Code of Federal Regulations, 2011 CFR

2011-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems §§ 1910.309-1910.330 [Reserved] Safety-Related Work Practices ...

29 CFR 1910.309-1910.330 - [Reserved

Code of Federal Regulations, 2012 CFR

2012-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems §§ 1910.309-1910.330 [Reserved] Safety-Related Work Practices ...

Public Awareness Survey Recommendations of the NHTSA-GHSA Working Group

DOT National Transportation Integrated Search

2011-07-01

The Governors Highway Safety Association (GHSA) and the National Highway Traffic Safety Administration (NHTSA) developed a basic set of survey questions including information on seat belt use, impaired driving, and speeding. These core questions can ...

NASA Software Safety Standard

NASA Technical Reports Server (NTRS)

Rosenberg, Linda

1997-01-01

If software is a critical element in a safety critical system, it is imperative to implement a systematic approach to software safety as an integral part of the overall system safety programs. The NASA-STD-8719.13A, "NASA Software Safety Standard", describes the activities necessary to ensure that safety is designed into software that is acquired or developed by NASA, and that safety is maintained throughout the software life cycle. A PDF version, is available on the WWW from Lewis. A Guidebook that will assist in the implementation of the requirements in the Safety Standard is under development at the Lewis Research Center (LeRC). After completion, it will also be available on the WWW from Lewis.

76 FR 72888 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-28

... pedestrian safety devices. 571.217 Bus emergency exits and window retention and release. 571.220 School bus... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 [Docket No. NHTSA-2011-0160] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor...

78 FR 76265 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

... Through 578, Except Parts 571 and 575 [Docket No. NHTSA-2013-0116] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration... passenger cars, multipurpose passenger vehicles, trucks, buses, trailers, motorcycles, and motor vehicle...

75 FR 76692 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-09

..., 510, 511, 512, 520, 523, 525, 526, and 571 [Docket No. NHTSA-2010-0159] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety... that specifically relate to passenger cars, multipurpose passenger vehicles, trucks, buses, trailers...

76 FR 69764 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... DEPARTMENT OF LABOR Mine Safety and Health Administration Petitions for Modification of Application of Existing Mandatory Safety Standards AGENCY: Mine Safety and Health Administration, Labor. ACTION: Notice. SUMMARY: Section 101(c) of the Federal Mine Safety and Health Act of 1977 and 30 CFR part...

78 FR 2662 - Proposed Extension of Approval of Information Collection; Comment Request: Safety Standard for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-14

... Information Collection; Comment Request: Safety Standard for Cigarette Lighters AGENCY: Consumer Product... disposable and novelty cigarette lighters. This collection of information consists of testing and recordkeeping requirements in certification regulations implementing the Safety Standard for Cigarette Lighters...

76 FR 34890 - Track Safety Standards; Concrete Crossties

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-15

...-0007, Notice No. 3] RIN 2130-AC01 Track Safety Standards; Concrete Crossties AGENCY: Federal Railroad... effective concrete crossties, for rail fastening systems connected to concrete crossties, and for automated inspections of track constructed with concrete crossties. The Track Safety Standards were amended via final...

77 FR 52272 - Safety Standard for Play Yards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

... Standard for Play Yards AGENCY: Consumer Product Safety Commission. ACTION: Notice of proposed rulemaking... to amend the play yard mandatory standard. This proposed rule would address the hazards associated... Improvement Act of 2008 (CPSIA), also known as the ``Danny Keysar Child Product Safety Notification Act...

Administrative goals and safety standards for hazard control on forested recreation sites

Treesearch

Lee A. Paine

1973-01-01

For efficient control of tree hazard on recreation sites, a specific administrative goal must be selected. A safety standard designed to achieve the selected goal and a uniform hazard-rating procedure will then promote a consistent level of safety at an acceptable cost. Safety standards can be established with the aid of data for past years, and dollar evaluations are...

Solution of basic operational problems of water-development works at the Votkinsk hydroproject

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deev, A. P.; Borisevich, L. A.; Fisenko, V. F.

2012-11-15

Basic operational problems of water-development works at the Votkinsk HPP are examined. Measures for restoration of normal safety conditions for the water-development works at the HPP, which had been taken during service, are presented.

30 CFR 6.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... MSHA. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group of... PRODUCTS TESTING AND EVALUATION BY INDEPENDENT LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.2... manufactures or controls the assembly of a product and applies to MSHA for approval of that product. Approval...

30 CFR 6.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... MSHA. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group of... PRODUCTS TESTING AND EVALUATION BY INDEPENDENT LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.2... manufactures or controls the assembly of a product and applies to MSHA for approval of that product. Approval...

30 CFR 6.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... MSHA. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group of... PRODUCTS TESTING AND EVALUATION BY INDEPENDENT LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.2... manufactures or controls the assembly of a product and applies to MSHA for approval of that product. Approval...

30 CFR 6.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... MSHA. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group of... PRODUCTS TESTING AND EVALUATION BY INDEPENDENT LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.2... manufactures or controls the assembly of a product and applies to MSHA for approval of that product. Approval...

30 CFR 6.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... MSHA. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group of... PRODUCTS TESTING AND EVALUATION BY INDEPENDENT LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.2... manufactures or controls the assembly of a product and applies to MSHA for approval of that product. Approval...

Alternative Fuels Data Center: E85 Codes and Standards

Science.gov Websites

Development Equipment Options Equipment Installation Codes, Standards, & Safety Vehicles Laws & ; Incentives Ethanol Codes, Standards, and Safety The U.S. Environmental Protection Agency's (EPA) Office of -Gasoline Blends. The Occupational Safety and Health Administration (OSHA) regulates some fuel-dispensing

48 CFR 822.305 - Contract clause.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Hours and Safety Standards Act—nursing home care contract supplement, in solicitations and contracts for nursing home care when the FAR clause at 52.222-4, Contract Work Hours and Safety Standards Act—Overtime... PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Contract Work Hours and Safety Standards Act...

48 CFR 822.305 - Contract clause.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Hours and Safety Standards Act—nursing home care contract supplement, in solicitations and contracts for nursing home care when the FAR clause at 52.222-4, Contract Work Hours and Safety Standards Act—Overtime... PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Contract Work Hours and Safety Standards Act...

76 FR 55825 - Federal Motor Vehicle Safety Standards, Child Restraint Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

... [Docket No. NHTSA-2011-0139] RIN 2127-AJ44 Federal Motor Vehicle Safety Standards, Child Restraint Systems..., amends a provision in Federal Motor Vehicle Safety Standard No. 213, ``Child restraint systems,'' that... forces, accelerations, moments and deflections, which are crucial in evaluating vehicle occupant...

49 CFR Appendix C to Part 238 - Suspension System Safety Performance Standards

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Suspension System Safety Performance Standards C Appendix C to Part 238 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER EQUIPMENT SAFETY STANDARDS Pt. 238, App. C...

Promoting bicycle commuter safety.

DOT National Transportation Integrated Search

2012-02-01

A basic premise in this report is that cycling should be encouraged because as the number of cyclists increases, the attention of motorists and safety improves; however, an important caveat is that the number of cyclists has to be commensurate with t...

29 CFR 1960.71 - Agency annual reports.

Code of Federal Regulations, 2010 CFR

2010-07-01

... individual agency progress and problems in correcting unsafe or unhealthful working conditions, and... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED...

29 CFR 1960.78 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... agency progress and problems in correcting unsafe and unhealthful working conditions, and recommendations... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED...

Connected vehicle pilot - privacy white paper.

DOT National Transportation Integrated Search

2016-09-21

Connected Vehicle (CV) technologies is beneficial when users feel safe in broadcasting their Basic Safety Message and trust in their safety and mobility applications. Users must also accept and have a right to know how their privacy is impacted by be...

Investigations of plastic composite materials for highway safety structures

DOT National Transportation Integrated Search

1998-08-01

This report presents a basic overview and assessment of different concepts and technologies of using polymer composites in structures generally used for highway safety. The structural systems included a highway barrier guardrail with its posts and bl...

29 CFR 1960.55 - Training of supervisors.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... health training for supervisory employees that includes: supervisory responsibility for providing and maintaining safe and healthful working conditions for employees, the agency occupational safety and health...

A new accurate and flexible index to assess the contribution of building materials to indoor gamma exposure.

PubMed

Nuccetelli, Cristina; Leonardi, Federica; Trevisi, Rosabianca

2015-05-01

The role of building materials as a source of gamma radiation has been recognized in the new EU Basic Safety Standards Directive which introduces an index I to screen building materials of radiological concern. This index was developed to account for average concrete values of thickness and density, the main structural characteristics of building materials that have an effect on gamma irradiation. Consequently, this screening procedure could be unfit in case of significantly different density and/or thickness of the building materials under examination. The paper proposes a more accurate and flexible activity concentration index, accounting for the actual density and thickness of building materials. Copyright © 2015 Elsevier Ltd. All rights reserved.

Loeffler 4.0: Diagnostic Metagenomics.

PubMed

Höper, Dirk; Wylezich, Claudia; Beer, Martin

2017-01-01

A new world of possibilities for "virus discovery" was opened up with high-throughput sequencing becoming available in the last decade. While scientifically metagenomic analysis was established before the start of the era of high-throughput sequencing, the availability of the first second-generation sequencers was the kick-off for diagnosticians to use sequencing for the detection of novel pathogens. Today, diagnostic metagenomics is becoming the standard procedure for the detection and genetic characterization of new viruses or novel virus variants. Here, we provide an overview about technical considerations of high-throughput sequencing-based diagnostic metagenomics together with selected examples of "virus discovery" for animal diseases or zoonoses and metagenomics for food safety or basic veterinary research. © 2017 Elsevier Inc. All rights reserved.

The Art World's Concept of Negative Space Applied to System Safety Management

NASA Technical Reports Server (NTRS)

Goodin, James Ronald (Ronnie)

2005-01-01

Tools from several different disciplines can improve system safety management. This paper relates the Art World with our system safety world, showing useful art schools of thought applied to system safety management, developing an art theory-system safety bridge. This bridge is then used to demonstrate relations with risk management, the legal system, personnel management and basic management (establishing priorities). One goal of this presentation/paper is simply to be a fun diversion from the many technical topics presented during the conference.

77 FR 43811 - Submission for OMB Review; Comment Request-Safety Standards for Full-Size Baby Cribs and Non-Full...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

... CONSUMER PRODUCT SAFETY COMMISSION Submission for OMB Review; Comment Request--Safety Standards for Full-Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY: Consumer Product Safety Commission. ACTION: Notice. SUMMARY: The Consumer Product Safety Commission (CPSC or Commission) announces...

16 CFR 1750.7 - Provision for changes in the standard.

Code of Federal Regulations, 2014 CFR

2014-01-01

....7 Section 1750.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION REFRIGERATOR SAFETY ACT REGULATIONS STANDARD FOR DEVICES TO PERMIT THE OPENING OF HOUSEHOLD REFRIGERATOR DOORS FROM THE INSIDE § 1750... wishing to propose a change in this standard shall submit to the Secretary, Consumer Product Safety...

16 CFR 1750.7 - Provision for changes in the standard.

Code of Federal Regulations, 2012 CFR

2012-01-01

....7 Section 1750.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION REFRIGERATOR SAFETY ACT REGULATIONS STANDARD FOR DEVICES TO PERMIT THE OPENING OF HOUSEHOLD REFRIGERATOR DOORS FROM THE INSIDE § 1750... wishing to propose a change in this standard shall submit to the Secretary, Consumer Product Safety...

16 CFR 1750.7 - Provision for changes in the standard.

Code of Federal Regulations, 2011 CFR

2011-01-01

....7 Section 1750.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION REFRIGERATOR SAFETY ACT REGULATIONS STANDARD FOR DEVICES TO PERMIT THE OPENING OF HOUSEHOLD REFRIGERATOR DOORS FROM THE INSIDE § 1750... wishing to propose a change in this standard shall submit to the Secretary, Consumer Product Safety...

75 FR 52059 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-24

... with certain requirements of 49 CFR part 232 -- Brake System Safety Standards for Freight and Other Non-Passenger Trains and Equipment; End-of Train Devices and CFR Part 215--Railroad Freight Car Safety Standards... requirements of its safety standards. The individual petition is described below, including the party seeking...

30 CFR Appendix I to Subpart C of... - National Consensus Standards

Code of Federal Regulations, 2010 CFR

2010-07-01

... Subpart C of Part 56 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Fire... Standards Mine operators seeking further information in the area of fire prevention and control may consult...

Crashworthiness of Small Poststandard School Buses: Safety Study.

ERIC Educational Resources Information Center

National Transportation Safety Board (DOT), Washington, DC.

In 1977, a series of Federal Motor Vehicle Safety Standards (FMVSS) for school buses became effective, mandating different performance standards for school buses compared to other buses. Because data on the crash performance of school buses built to these standards were lacking, the National Transportation Safety Board conducted a series of…

78 FR 14015 - Medical Devices; Exemption From Premarket Notification; Class II Devices; Powered Patient Transport

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-04

... for Safety--Collateral Standard: Electromagnetic Compatibility--Requirements and Tests,'' and ASME A18.1 ``Safety Standard for Platform Lifts and Stairway Chair Lifts'') must validate electromagnetic...: Electromagnetic Compatibility--Requirements and Tests,'' and ASME A18.1 ``Safety Standard for Platform Lifts and...

75 FR 15620 - Federal Motor Vehicle Safety Standards; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... fully develop improved brake systems and also to ensure vehicle control and stability while braking... [Docket No. NHTSA 2009-0175] RIN 2127-AK62 Federal Motor Vehicle Safety Standards; Air Brake Systems... Federal motor vehicle safety standard for air brake systems by requiring substantial improvements in...

75 FR 54223 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-03

... requirements of 49 CFR Part 232--Brake System Safety Standards for Freight and Other Non-Passenger Trains and Equipment; End-of Train Devices, CFR Part 229--Railroad Locomotive Safety Standards, and CFR Part 215--Railroad Freight Car Safety Standards. Specifically, UP seeks relief to permit trains received at the U.S...

77 FR 54836 - Federal Motor Vehicle Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-06

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards CFR Correction 0 In Title 49 of the Code of Federal Regulations... read as follows: Sec. 571.119 Standard No. 119; New pneumatic tires for motor vehicles with a GVWR of...

Improving compliance with Occupational Safety and Health Administration standards.

PubMed

Cuming, Richard; Rocco, Tonette S; McEachern, Adriana G

2008-02-01

Health care facilities can be dangerous places. The mission of the Occupational Safety and Health Administration (OSHA) is to improve the safety of the American workplace by developing and implementing standards that prevent occupational injury, illness, and death. Perioperative services are performed in environments where exposure to bloodborne pathogens is a daily occurrence, making implementation and compliance with OSHA standards very important. Employees and employers must remain current with workplace safety requirements, including use of personal protective equipment. This article presents implications of the OSHA standards for employers, educators, and employees.

Basic life support: evaluation of learning using simulation and immediate feedback devices1.

PubMed

Tobase, Lucia; Peres, Heloisa Helena Ciqueto; Tomazini, Edenir Aparecida Sartorelli; Teodoro, Simone Valentim; Ramos, Meire Bruna; Polastri, Thatiane Facholi

2017-10-30

to evaluate students' learning in an online course on basic life support with immediate feedback devices, during a simulation of care during cardiorespiratory arrest. a quasi-experimental study, using a before-and-after design. An online course on basic life support was developed and administered to participants, as an educational intervention. Theoretical learning was evaluated by means of a pre- and post-test and, to verify the practice, simulation with immediate feedback devices was used. there were 62 participants, 87% female, 90% in the first and second year of college, with a mean age of 21.47 (standard deviation 2.39). With a 95% confidence level, the mean scores in the pre-test were 6.4 (standard deviation 1.61), and 9.3 in the post-test (standard deviation 0.82, p <0.001); in practice, 9.1 (standard deviation 0.95) with performance equivalent to basic cardiopulmonary resuscitation, according to the feedback device; 43.7 (standard deviation 26.86) mean duration of the compression cycle by second of 20.5 (standard deviation 9.47); number of compressions 167.2 (standard deviation 57.06); depth of compressions of 48.1 millimeter (standard deviation 10.49); volume of ventilation 742.7 (standard deviation 301.12); flow fraction percentage of 40.3 (standard deviation 10.03). the online course contributed to learning of basic life support. In view of the need for technological innovations in teaching and systematization of cardiopulmonary resuscitation, simulation and feedback devices are resources that favor learning and performance awareness in performing the maneuvers.

Metal-oxide-based energetic materials and synthesis thereof

DOEpatents

Tillotson, Thomas M. , Simpson; Randall, L [Livermore, CA; Hrubesh, Lawrence W [Pleasanton, CA

2006-01-17

A method of preparing energetic metal-oxide-based energetic materials using sol-gel chemistry has been invented. The wet chemical sol-gel processing provides an improvement in both safety and performance. Essentially, a metal-oxide oxidizer skeletal structure is prepared from hydrolyzable metals (metal salts or metal alkoxides) with fuel added to the sol prior to gelation or synthesized within the porosity metal-oxide gel matrix. With metal salt precursors a proton scavenger is used to destabilize the sol and induce gelation. With metal alkoxide precursors standard well-known sol-gel hydrolysis and condensation reactions are used. Drying is done by standard sol-gel practices, either by a slow evaporation of the liquid residing within the pores to produce a high density solid nanocomposite, or by supercritical extraction to produce a lower density, high porous nanocomposite. Other ingredients may be added to this basic nanostructure to change physical and chemical properties, which include organic constituents for binders or gas generators during reactions, burn rate modifiers, or spectral emitters.

Step-Climbing Power Wheelchairs: A Literature Review

PubMed Central

Sundaram, S. Andrea; Wang, Hongwu; Ding, Dan

2017-01-01

Background: Power wheelchairs capable of overcoming environmental barriers, such as uneven terrain, curbs, or stairs, have been under development for more than a decade. Method: We conducted a systematic review of the scientific and engineering literature to identify these devices, and we provide brief descriptions of the mechanism and method of operation for each. We also present data comparing their capabilities in terms of step climbing and standard wheelchair functions. Results: We found that all the devices presented allow for traversal of obstacles that cannot be accomplished with traditional power wheelchairs, but the slow speeds and small wheel diameters of some designs make them only moderately effective in the basic area of efficient transport over level ground and the size and configuration of some others limit maneuverability in tight spaces. Conclusion: We propose that safety and performance test methods more comprehensive than the International Organization for Standards (ISO) testing protocols be developed for measuring the capabilities of advanced wheelchairs with step-climbing and other environment-negotiating features to allow comparison of their clinical effectiveness. PMID:29339886

16 CFR 1213.7 - Findings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR ENTRAPMENT HAZARDS IN BUNK BEDS § 1213.7 Findings. The Consumer Product Safety Act requires that the... there will be substantial compliance with such voluntary standard. (d) The benefits expected from the...

16 CFR 1210.11 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR CIGARETTE LIGHTERS Certification Requirements § 1210.11 General. Section 14(a) of the Consumer Product... product that is subject to a consumer product safety standard and that is distributed in commerce to issue...

29 CFR 1952.320 - Description of the plan as initially approved.

Code of Federal Regulations, 2013 CFR

2013-07-01

... specifically designed to cover the following areas: general industrial safety, construction safety, first aid... Section 1952.320 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... structure, the Occupational Safety Standards Commission has the responsibility to adopt standards and...

29 CFR 1952.320 - Description of the plan as initially approved.

Code of Federal Regulations, 2012 CFR

2012-07-01

... specifically designed to cover the following areas: general industrial safety, construction safety, first aid... Section 1952.320 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... structure, the Occupational Safety Standards Commission has the responsibility to adopt standards and...

29 CFR 1952.320 - Description of the plan as initially approved.

Code of Federal Regulations, 2014 CFR

2014-07-01

... specifically designed to cover the following areas: general industrial safety, construction safety, first aid... Section 1952.320 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... structure, the Occupational Safety Standards Commission has the responsibility to adopt standards and...

Applied Research on Laparoscopic Simulator in the Resident Surgical Laparoscopic Operation Technical Training.

PubMed

Fu, Shangxi; Liu, Xiao; Zhou, Li; Zhou, Meisheng; Wang, Liming

2017-08-01

The purpose of this study was to estimate the effects of surgical laparoscopic operation course on laparoscopic operation skills after the simulated training for medical students with relatively objective results via data gained before and after the practice course of laparoscopic simulator of the resident standardized trainees. Experiment 1: 20 resident standardized trainees with no experience in laparoscopic surgery were included in the inexperienced group and finished simulated cholecystectomy according to simulator videos. Simulator data was collected (total operation time, path length, average speed of instrument movement, movement efficiency, number of perforations, the time cautery is applied without appropriate contact with adhesions, number of serious complications). Ten attending doctors were included in the experienced group and conducted the operation of simulated cholecystectomy directly. Data was collected with simulator. Data of two groups was compared. Experiment 2: Participants in inexperienced group were assigned to basic group (receiving 8 items of basic operation training) and special group (receiving 8 items of basic operation training and 4 items of specialized training), and 10 persons for each group. They received training course designed by us respectively. After training level had reached the expected target, simulated cholecystectomy was performed, and data was collected. Experimental data between basic group and special group was compared and then data between special group and experienced group was compared. Results of experiment 1 showed that there is significant difference between data in inexperienced group in which participants operated simulated cholecystectomy only according to instructors' teaching and operation video and data in experienced group. Result of experiment 2 suggested that, total operation time, number of perforations, number of serious complications, number of non-cauterized bleeding and the time cautery is applied without appropriate contact with adhesions in special group were all superior to those in basic group. There was no statistical difference on other data between special group and basic group. Comparing special group with experienced group, data of total operation time and the time cautery is applied without appropriate contact with adhesions in experienced group was superior to that in special group. There was no statistical difference on other data between special group and experienced group. Laparoscopic simulators are effective for surgical skills training. Basic courses could mainly improve operator's hand-eye coordination and perception of sense of the insertion depth for instruments. Specialized training courses could not only improve operator's familiarity with surgeries, but also reduce operation time and risk, and improve safety.

The Core Reading Standards: A Basic Qualitative Study of Elementary Teachers' Perceptions

ERIC Educational Resources Information Center

Phillips, Lavern

2017-01-01

The Common Core State Standards in English Language Arts were a part of a reformation of the nation's reading standards. The demands for higher standards were due to the general public and Federal legislators request for higher student achievement. The purpose of this basic qualitative study was to explore the teachers' life experiences, thoughts,…

Adult Basic Educators' Descriptions of Standards Implementation and Its Influence on Cognitive Rigor

ERIC Educational Resources Information Center

Olson, Lia Conklin

2017-01-01

With only four years of mandated state-standards in adult basic education (ABE), very little is known about the influence of state-standards implementation on the unique learning needs of its adult students. Two decades of research on standards-based education in the U.S. K12 system has yielded widely debated results regarding the impact of…

Can claims, misleading information, and manufacturing issues regarding dietary supplements be improved in the United States?

PubMed

Gibson, James E; Taylor, David A

2005-09-01

The safety and effectiveness of over-the-counter (OTC) drugs are assessed through the Food and Drug Administration's (FDA's) OTC drug review. Prescription drugs are approved through the rigorous new drug application (NDA) process. In contrast, dietary supplements are regulated as foods, and the FDA must determine that a dietary supplement ingredient poses a "significant or unreasonable risk of illness or injury" instead of requiring the manufacturer to provide safety data. According to the FDA, there are more than 29,000 different dietary supplements available to consumers today. This momentum has its roots in consumer interest in health and self-care and suggests that Americans are searching for alternatives to conventional foods for physical and mental well being. The Committee on the Framework for Evaluating the Safety of Dietary Supplements was formed under the auspices of the Food and Nutrition Board that produced a report entitled Dietary Supplements: A Framework for Evaluating Safety. Categories of specific information identified for use are 1) human data, 2) animal studies, 3) in vitro experiments, and 4) information on related substances. Several factors were identified to guide the FDA in applying the framework. Two of these factors are expressed as follows: 1) "the appropriate scientific standard to be used to overturn this basic assumption of safety is to demonstrate significant or unreasonable risk, not prove that an ingredient is unsafe"; and 2) "approaches taken by diverse organizations and governmental bodies, both within and outside the United States, which evaluate the safety and at times efficacy of dietary supplement ingredients, vary in their relevance to the protection of the American public from risks associated with consumption of dietary supplement ingredients".

Exploiting Science: Enhancing the Safety Training of Pilots to Reduce the Risk of Bird Strikes

NASA Astrophysics Data System (ADS)

Mendonca, Flavio A. C.

Analysis of bird strikes to aviation in the U.S. from 1990 to 2015 indicate that the successful mitigation efforts at airports, which must be sustained, have reduced incidents with damage and a negative effect-on-flight since 2000. However, such efforts have done little to reduce strikes outside the airport jurisdiction, such as occurred with US Airways Flight 1549 in 2009. There are basically three strategies to mitigate the risk of bird strikes: standards set by aviation authorities, technology, and actions by crewmembers. Pilots play an important role as stakeholders in the prevention of bird strikes, especially outside the airport environment. Thus, safety efforts require enhanced risk management and aeronautical decision-making training for flight crews. The purpose of this study was to determine if a safety training protocol could effectively enhance CFR Part 141 general aviation pilots' knowledge and skills to reduce the risk of bird strikes to aviation. Participants were recruited from the Purdue University professional flight program and from Purdue Aviation. The researcher of this study used a pretest posttest experimental design. Additionally, qualitative data were collected through open-ended questions in the pretest, posttest, and a follow-up survey questionnaire. The participants' pretest and posttest scores were analyzed using parametric and nonparametric tests. Results indicated a significant increase in the posttest scores of the experimental group. An investigation of qualitative data showed that the topic "safety management of bird hazards by pilots" is barely covered during the ground and flight training of pilots. Furthermore, qualitative data suggest a misperception of the safety culture tenets and a poor familiarity with the safety risk management process regarding bird hazards. Finally, the researcher presented recommendations for practice and future research.

Monitoring signals for vaccine safety: the assessment of individual adverse event reports by an expert advisory committee. Advisory Committee on Causality Assessment.

PubMed Central

Collet, J. P.; MacDonald, N.; Cashman, N.; Pless, R.

2000-01-01

Monitoring vaccine safety is a complex and shared responsibility. It can be carried out in many ways, one of which is the reporting of individual cases of adverse reactions thought to be due to vaccination. The task is difficult because ascribing causality to an individual case report is fraught with challenges. A standardized evaluation instrument--known as the causality assessment form--was therefore developed for use by an expert advisory committee to facilitate the process. By following the several sections in this form, the members of the committee are taken through a series of points to establish causality. These points include the basic criteria for causation such as biological plausibility, the time elapsed between the vaccine administration and the onset of the adverse event, and whether other factors (drugs, chemicals or underlying disease) could account for the adverse symptoms. The form concludes with a consensus assessment of causality, a commentary about the assessment, and advice for further study or follow-up. This method of assessing the more serious cases of adverse reaction reported to vaccination has proven useful in evaluating ongoing safety of vaccines in Canada. Through analyses such as this, new signals can be identified and investigated further. PMID:10743282

40 CFR 51.352 - Basic I/M performance standard.

Code of Federal Regulations, 2010 CFR

2010-07-01

...% emission test failure rate among pre-1981 model year vehicles. (10) Waiver rate. A 0% waiver rate. (11... 20% emission test failure rate among pre-1981 model year vehicles. (11) Waiver rate. A 0% waiver rate... Requirements § 51.352 Basic I/M performance standard. (a) Basic I/M programs shall be designed and implemented...

40 CFR 51.352 - Basic I/M performance standard.

Code of Federal Regulations, 2014 CFR

2014-07-01

...% emission test failure rate among pre-1981 model year vehicles. (10) Waiver rate. A 0% waiver rate. (11... 20% emission test failure rate among pre-1981 model year vehicles. (11) Waiver rate. A 0% waiver rate... Requirements § 51.352 Basic I/M performance standard. (a) Basic I/M programs shall be designed and implemented...

40 CFR 51.352 - Basic I/M performance standard.

Code of Federal Regulations, 2011 CFR

2011-07-01

...% emission test failure rate among pre-1981 model year vehicles. (10) Waiver rate. A 0% waiver rate. (11... 20% emission test failure rate among pre-1981 model year vehicles. (11) Waiver rate. A 0% waiver rate... Requirements § 51.352 Basic I/M performance standard. (a) Basic I/M programs shall be designed and implemented...

40 CFR 51.352 - Basic I/M performance standard.

Code of Federal Regulations, 2012 CFR

2012-07-01

...% emission test failure rate among pre-1981 model year vehicles. (10) Waiver rate. A 0% waiver rate. (11... 20% emission test failure rate among pre-1981 model year vehicles. (11) Waiver rate. A 0% waiver rate... Requirements § 51.352 Basic I/M performance standard. (a) Basic I/M programs shall be designed and implemented...

40 CFR 51.352 - Basic I/M performance standard.

Code of Federal Regulations, 2013 CFR

2013-07-01

...% emission test failure rate among pre-1981 model year vehicles. (10) Waiver rate. A 0% waiver rate. (11... 20% emission test failure rate among pre-1981 model year vehicles. (11) Waiver rate. A 0% waiver rate... Requirements § 51.352 Basic I/M performance standard. (a) Basic I/M programs shall be designed and implemented...

23 CFR 655.604 - Achieving basic uniformity.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS... system should be based on inventories made in accordance with the Highway Safety Program Guideline 21, “Roadway Safety.” These inventories provide the information necessary for programming traffic control...

Promoting bicycle commuter safety : [research brief].

DOT National Transportation Integrated Search

2012-02-01

A basic premise in this report is that cycling should be encouraged because as the number of cyclists increases, the attention of motorists and safety improves. However, an important caveat is that the number of cyclists has to be commensurate with t...

Exercise-Induced Bronchospasm

MedlinePlus

... into old age. There is a place for exercise at…Family Health and SafetyRead Article >>Family HealthFamily Health and SafetyThere ... Info Sugar and Sugar Substitutes Exercise and Fitness Exercise Basics Sports ... Well-Being Mental Health Sex and Birth Control Sex and Sexuality Birth ...

Pedestrian facilities users guide : providing safety and mobility

DOT National Transportation Integrated Search

2002-03-01

The Guide provides information on how to identify safety and mobility needs of pedestrians within roadway rights-of-way. Chapter 1 provides an overview of the creation of a walkable environment. Chepter 2 describes basic pedestrian crash trends and t...

OSHA Laboratory Standard: Driving Force for Laboratory Safety!

ERIC Educational Resources Information Center

Roy, Kenneth R.

2000-01-01

Discusses the Occupational Safety and Health Administration's (OSHA's) Laboratory Safety Standards as the major driving force in establishing and maintaining a safe working environment for teachers and students. (Author)

30 CFR 57.22002 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Definitions. 57.22002 Section 57.22002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Safety Standards for Methane in...

16 CFR 1115.8 - Compliance with product safety standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... applicable mandatory consumer product safety standards and to report to the Commission any products which do.... 1115.8 Section 1115.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.8 Compliance with...

76 FR 29333 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials... for natural gas pipelines and for hazardous liquid pipelines. Both committees were established under...

Introducing Proper Chemical Hygiene and Safety in the General Chemistry Curriculum

NASA Astrophysics Data System (ADS)

Miller, Gordon J.; Heideman, Stephen A.; Greenbowe, Thomas J.

2000-09-01

Chemical safety is an important component of science education for everyone, not just for chemistry majors. Developing a responsible and knowledgeable attitude towards chemical safety best starts at the early stages of a student's career. In many colleges and universities, safety education in undergraduate chemistry has been relegated primarily to a few regulatory documents at the beginning of a laboratory course, or an occasional warning in the description of a specific experiment in a prelaboratory lecture. Safety issues are seldom raised in general chemistry or organic chemistry lecture-based chemistry courses. At Iowa State University we have begun to implement a program, Chemical Hygiene and Safety in the Laboratory, into the undergraduate chemistry curriculum. This program is designed to increase the awareness and knowledge of proper chemical hygiene and laboratory safety issues among all students taking general chemistry and organic chemistry courses. Laboratory protocol, use of safety equipment, familiarity with MSD sheets, basics of first aid, some specific terminology surrounding chemical hygiene, EPA and OSHA requirements, and the use of the World Wide Web to search and locate chemical safety information are topics that are applied throughout the chemistry curriculum. The novelty of this approach is to incorporate MSD sheets and safety information that can be located on the World Wide Web in a series of safety problems and assignments, all related to the chemistry experiments students are about to perform. The fundamental idea of our approach is not only to teach students what is required for appropriate safety measures, but also to involve them in the enforcement of basic prudent practices.

78 FR 40443 - Submission for OMB Review; Comment Request-Recordkeeping Requirements Under the Safety Standard...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-05

... Request--Recordkeeping Requirements Under the Safety Standard for Infant Walkers AGENCY: Consumer Product... for infant walkers, 16 CFR part 1216. No comments were received in response to that notice. Therefore... has been incorporated by reference in the safety standard for infant walkers, 16 CFR part 1216...

75 FR 21567 - Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices and Associated Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

... Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices and Associated Equipment; Denial... Motor Vehicle Safety Standard (FMVSS) No. 108; Lamps, reflective devices, and associated equipment... physical filaments in the lamp. Specifically, BMW requested that paragraph S10.17.1.1.2 \\4\\ of the...

75 FR 6123 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-08

... motor vehicle safety standard is in effect under this chapter, a State or a political subdivision of a... [Docket No. NHTSA-2009-0156] RIN 2127-AK57 Federal Motor Vehicle Safety Standards; Occupant Crash...'s response to petitions for reconsideration of a November 12, 2008 final rule that amended the child...