How to design and write a clinical research protocol in Cosmetic Dermatology*

PubMed Central

Bagatin, Ediléia; Miot, Helio A.

2013-01-01

Cosmetic Dermatology is a growing subspecialty. High-quality basic science studies have been published; however, few double-blind, randomized controlled clinical trials, which are the major instrument for evidence-based medicine, have been conducted in this area. Clinical research is essential for the discovery of new knowledge, improvement of scientific basis, resolution of challenges, and good clinical practice. Some basic principles for a successful researcher include interest, availability, persistence, and honesty. It is essential to learn how to write a protocol research and to know the international and national regulatory rules. A complete clinical trial protocol should include question, background, objectives, methodology (design, variable description, sample size, randomization, inclusion and exclusion criteria, intervention, efficacy and safety measures, and statistical analysis), consent form, clinical research form, and references. Institutional ethical review board approval and financial support disclosure are necessary. Publication of positive or negative results should be an authors' commitment. PMID:23539006

Operational and safety efficiency of traffic signal installations.

DOT National Transportation Integrated Search

2008-05-01

The basic principle of signalization is the provision of a safe and effective means for time and space allocation at an intersection for both vehicular and pedestrian needs. The safety community concurs on the fact that there is the potential for saf...

Research on Basic Design Education: An International Survey

ERIC Educational Resources Information Center

Boucharenc, C. G.

2006-01-01

This paper reports on the results of a survey and qualitative analysis on the teaching of "Basic Design" in schools of design and architecture located in 22 countries. In the context of this research work, Basic Design means the teaching and learning of design fundamentals that may also be commonly referred to as the Principles of Two- and…

Using Design Principles to Teach Technical Communication.

ERIC Educational Resources Information Center

Markel, Mike

1995-01-01

Compares the writing of two students--a competent writer and a weak one--in a technical communication course before and after discussion of design principles. Finds that a basic understanding of design principles helped them improve document macrostructure but had little effect on document microstructure. Suggests that integrating document design…

Principles of Safety Pharmacology

PubMed Central

Pugsley, M K; Authier, S; Curtis, M J

2008-01-01

Safety Pharmacology is a rapidly developing discipline that uses the basic principles of pharmacology in a regulatory-driven process to generate data to inform risk/benefit assessment. The aim of Safety Pharmacology is to characterize the pharmacodynamic/pharmacokinetic (PK/PD) relationship of a drug's adverse effects using continuously evolving methodology. Unlike toxicology, Safety Pharmacology includes within its remit a regulatory requirement to predict the risk of rare lethal events. This gives Safety Pharmacology its unique character. The key issues for Safety Pharmacology are detection of an adverse effect liability, projection of the data into safety margin calculation and finally clinical safety monitoring. This article sets out to explain the drivers for Safety Pharmacology so that the wider pharmacology community is better placed to understand the discipline. It concludes with a summary of principles that may help inform future resolution of unmet needs (especially establishing model validation for accurate risk assessment). Subsequent articles in this issue of the journal address specific aspects of Safety Pharmacology to explore the issues of model choice, the burden of proof and to highlight areas of intensive activity (such as testing for drug-induced rare event liability, and the challenge of testing the safety of so-called biologics (antibodies, gene therapy and so on.). PMID:18604233

Basic Principles of Lyophilization, Part 1.

PubMed

Akers, Michael J

2015-01-01

The achievement of a high-quality lyophilized (freeze-dried) dosage form involves the combination of optimal formulation design and optimal freeze-dry cycle design. This 2-part article describes how this can be done. Part 1 discusses the basic principles and procedures of lyophilization up to a discussion on the different stages of lyophilization. The stages of lyophilization are discussed in part 2.

[Substantiation of a complex of radiation-hygienic approaches to the management of very low-level waste].

PubMed

Korenkov, I P; Lashchenova, T N; Shandala, N K

2015-01-01

In the article there are presented materials on radiation-hygienic approaches to the treatment of very low level radioactive waste (VLLW) and industrial waste containing radionuclides. There is done detailed information on radiation-hygienic principles and criteria for the assurance ofradiation safety in the collection, transportation, storage and processing of VLLW as a category of radioactive waste.. Particular attention is paid to the problem of designing VLLW landfill site choice, system of radiation monitoring in operation and decommissioning of the landfill. There are presented data about the criteria for the release of VLLW buried at the site, from regulatory control. Also there are considered in detail the radiation-hygienic requirements for radiation safety of industrial waste containing radionuclides for which there is assumed unlimited and limited use of solid materials in economic activity, based on the requirements ofthe revised Basic Sanitary Rules for Radiation Safety - 99/2010. There are considered basic requirements for the organization of industrial waste landfill. As an example, there-are presented the hygiene requirements for industrial waste management and results of waste categorization in Northern Federal Enterprise for Radioactive Waste Management.

Basic Principles of Animal Science. Reprinted.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee.

The reference book is designed to fulfill the need for organized subject matter dealing with basic principles of animal science to be incorporated into the high school agriculture curriculum. The material presented is scientific knowledge basic to livestock production. Five units contain specific information on the following topics: anatomy and…

Magnetostrictive direct drive motors

NASA Technical Reports Server (NTRS)

Naik, Dipak; Dehoff, P. H.

1992-01-01

A new rare earth alloy, Terfenol-D, combines low frequency operation and extremely high energy density with high magnetostriction. Its material properties make it suitable as a drive element for actuators requiring high output torque. The high strains, the high forces and the high controllability of Terfenol alloys provide a powerful and challenging basis for new ways to generate motion in actuators. Two prototypes of motors using Terfenol-D rods were developed at NASA Goddard. The basic principles of operation are provided of the motor along with other relevant details. A conceptual design of a torque limiting safety clutch/brake under development is illustrated. Also, preliminary design drawings of a linear actuator using Terfenol-D is shown.

Commercial Vessel Safety. Economic Costs. Preliminary.

DTIC Science & Technology

1979-12-01

or "rippled" through the economy when a regulation is implemented. The survey associated with determination of costs focused upon two basic areas...in their application of standard financial principles and in their utilization of basic ship cost components (e.g., investment and operating costs...on the estimation of costs per ton of capacity provided. The basic unit for analyzing ships’ costs used is a single voyage (round trip) on a particular

Shared Knowledge among Graphic Designers, Instructional Designers and Subject Matter Experts in Designing Multimedia-Based Instructional Media

ERIC Educational Resources Information Center

Razak, Rafiza Abdul

2013-01-01

The research identified and explored the shared knowledge among the instructional multimedia design and development experts comprising of subject matter expert, graphic designer and instructional designer. The knowledge shared by the team was categorized into three groups of multimedia design principles encompasses of basic principles, authoring…

The ergonomics of learning: educational design and learning performance.

PubMed

Smith, T J

2007-10-01

The application of ergonomics/human factors (E/HF) principles and practices, and the implementation of ergonomics programmes, have achieved proven success in improving performance, productivity, competitiveness, and safety and health in most occupational sectors. However, the benefits that the application of E/HF science might bring to promoting student learning have yet to be widely recognized. This paper deals with the fundamental purpose of education - student learning - and with the question of how the ergonomic design of the learning environment influences learning performance. The underlying premise, embodied in the quote below, is that student learning performance to a substantial degree is context specific - influenced and specialized in relation to specific design factors in the learning environment. The basic scientific question confronting learning ergonomics is which design characteristics in the learning environment have the greatest influence on variability in learning performance. Practically, the basic challenge is to apply this scientific understanding to ergonomic interventions directed at design improvements of learning environments to benefit learning. This paper expands upon these themes by addressing the origins and scope of learning ergonomics, differing perspectives on the nature of learning, evidence for context specificity in learning and conclusions and research implications regarding an ergonomics perspective on learning.

[Basic consideration on the security checking of sick travelers at airports].

PubMed

Felkai, Péter; Mártai, István

2012-09-02

The authorities guarantee the safety of passengers during air travel by strict ground security measures. All of these measures are restrictive and can affect the health status of both healthy and ill travelers. Patients who are in critical condition or confined to a stretcher and have to be repatriated by stretcher on a regular flight, must pass the airport security check as well. But the developers of security system should take into account the medical safety of patients during the procedure. The relevant medical principles are painfully missing not only in Hungary, but unfortunately also at most international airports. On the basis of principles reviewed in the present publication, an unambiguous, professionally reconciled regulation is necessary that would serve as a guideline for airport management and authorities, as well as for the involved medical personnel. Although setting principles into practice requires a different solution at each airport, yet, passenger safety and patient safety have to be harmonized as soon as possible.

Basic principles of test-negative design in evaluating influenza vaccine effectiveness.

PubMed

Fukushima, Wakaba; Hirota, Yoshio

2017-08-24

Based on the unique characteristics of influenza, the concept of "monitoring" influenza vaccine effectiveness (VE) across the seasons using the same observational study design has been developed. In recent years, there has been a growing number of influenza VE reports using the test-negative design, which can minimize both misclassification of diseases and confounding by health care-seeking behavior. Although the test-negative designs offer considerable advantages, there are some concerns that widespread use of the test-negative design without knowledge of the basic principles of epidemiology could produce invalid findings. In this article, we briefly review the basic concepts of the test-negative design with respect to classic study design such as cohort studies or case-control studies. We also mention selection bias, which may be of concern in some countries where rapid diagnostic testing is frequently used in routine clinical practices, as in Japan. Copyright © 2017. Published by Elsevier Ltd.

PLASMA-field barrier sentry (PFBS)

NASA Astrophysics Data System (ADS)

Gonzaga, Ernesto A.; Cossette, Harold James

2013-06-01

This paper describes the concept and method in designing and developing a unique security system apparatus that will counter unauthorized personnel: to deny access to or occupy an area or facility, to control or direct crowd or large groups, and to incapacitate individuals or small groups until they can be secured by military or law enforcement personnel. The system exploits Tesla coil technology. Application of basic engineering circuit analysis and principle is demonstrated. Transformation from classical spark gap method to modern solid state design was presented. The analysis shows how the optimum design can be implemented to maximize performance of the apparatus. Discussion of the hazardous effects of electrical elements to human physiological conditions was covered. This serves to define guidelines in implementing safety limits and precautions on the performance of the system. The project is strictly adhering towards non-lethal technologies and systems.

Epidemiology and Clinical Research Design, Part 2: Principles.

PubMed

Manja, Veena; Lakshminrusimha, Satyan

This is the third article covering core knowledge in scholarly activities for neonatal physicians. In this article, we discuss various principles of epidemiology and clinical research design. A basic knowledge of these principles is necessary for conducting clinical research and for proper interpretation of studies. This article reviews bias and confounding, causation, incidence and prevalence, decision analysis, cost-effectiveness, sensitivity analysis, and measurement.

Applying Human Factors Principles to Mitigate Usability Issues Related to Embedded Assumptions in Health Information Technology Design

PubMed Central

Lowry, Svetlana Z; Patterson, Emily S

2014-01-01

Background There is growing recognition that design flaws in health information technology (HIT) lead to increased cognitive work, impact workflows, and produce other undesirable user experiences that contribute to usability issues and, in some cases, patient harm. These usability issues may in turn contribute to HIT utilization disparities and patient safety concerns, particularly among “non-typical” HIT users and their health care providers. Health care disparities are associated with poor health outcomes, premature death, and increased health care costs. HIT has the potential to reduce these disparate outcomes. In the computer science field, it has long been recognized that embedded cultural assumptions can reduce the usability, usefulness, and safety of HIT systems for populations whose characteristics differ from “stereotypical” users. Among these non-typical users, inappropriate embedded design assumptions may contribute to health care disparities. It is unclear how to address potentially inappropriate embedded HIT design assumptions once detected. Objective The objective of this paper is to explain HIT universal design principles derived from the human factors engineering literature that can help to overcome potential usability and/or patient safety issues that are associated with unrecognized, embedded assumptions about cultural groups when designing HIT systems. Methods Existing best practices, guidance, and standards in software usability and accessibility were subjected to a 5-step expert review process to identify and summarize those best practices, guidance, and standards that could help identify and/or address embedded design assumptions in HIT that could negatively impact patient safety, particularly for non-majority HIT user populations. An iterative consensus-based process was then used to derive evidence-based design principles from the data to address potentially inappropriate embedded cultural assumptions. Results Design principles that may help identify and address embedded HIT design assumptions are available in the existing literature. Conclusions Evidence-based HIT design principles derived from existing human factors and informatics literature can help HIT developers identify and address embedded cultural assumptions that may underlie HIT-associated usability and patient safety concerns as well as health care disparities. PMID:27025349

Applying Human Factors Principles to Mitigate Usability Issues Related to Embedded Assumptions in Health Information Technology Design.

PubMed

Gibbons, Michael C; Lowry, Svetlana Z; Patterson, Emily S

2014-12-18

There is growing recognition that design flaws in health information technology (HIT) lead to increased cognitive work, impact workflows, and produce other undesirable user experiences that contribute to usability issues and, in some cases, patient harm. These usability issues may in turn contribute to HIT utilization disparities and patient safety concerns, particularly among "non-typical" HIT users and their health care providers. Health care disparities are associated with poor health outcomes, premature death, and increased health care costs. HIT has the potential to reduce these disparate outcomes. In the computer science field, it has long been recognized that embedded cultural assumptions can reduce the usability, usefulness, and safety of HIT systems for populations whose characteristics differ from "stereotypical" users. Among these non-typical users, inappropriate embedded design assumptions may contribute to health care disparities. It is unclear how to address potentially inappropriate embedded HIT design assumptions once detected. The objective of this paper is to explain HIT universal design principles derived from the human factors engineering literature that can help to overcome potential usability and/or patient safety issues that are associated with unrecognized, embedded assumptions about cultural groups when designing HIT systems. Existing best practices, guidance, and standards in software usability and accessibility were subjected to a 5-step expert review process to identify and summarize those best practices, guidance, and standards that could help identify and/or address embedded design assumptions in HIT that could negatively impact patient safety, particularly for non-majority HIT user populations. An iterative consensus-based process was then used to derive evidence-based design principles from the data to address potentially inappropriate embedded cultural assumptions. Design principles that may help identify and address embedded HIT design assumptions are available in the existing literature. Evidence-based HIT design principles derived from existing human factors and informatics literature can help HIT developers identify and address embedded cultural assumptions that may underlie HIT-associated usability and patient safety concerns as well as health care disparities.

Receiver design and performance characteristics

NASA Technical Reports Server (NTRS)

Simon, M. K.; Yuen, J. H.

1982-01-01

The basic design, principles of operation, and characteristics of deep space communications receivers are examined. In particular, the basic fundamentals of phase-locked loop and Costas loop receivers used for synchronization, tracking, and demodulation of phase-coherent signals in residual carrier and suppressed carrier systems are addressed.

Data Banks; Bibliography.

ERIC Educational Resources Information Center

van der Aa, H. J., Comp.; And Others

This 249 item, mostly annotated bibliography cites literature on the general themes of basic principles, hardware, software and application studies of data bases. The broad categories are principles, development possibilities, organizational design, bibliographies, economic aspects, data structure-design, file organization, programing, aviation,…

Enhancing the traditional hospital design process: a focus on patient safety.

PubMed

Reiling, John G; Knutzen, Barbara L; Wallen, Thomas K; McCullough, Susan; Miller, Ric; Chernos, Sonja

2004-03-01

In 2002 St. Joseph's Community Hospital (West Bend, WI), a member of SynergyHealth, brought together leaders in health care and systems engineering to develop a set of safety-driven facility design principles that would guide the hospital design process. DESIGNING FOR SAFETY: Hospital leadership recognized that a cross-departmental team approach would be needed and formed the 11-member Facility Design Advisory Council, which, with departmental teams and the aid of architects, was responsible for overseeing the design process and for ensuring that the safety considerations were met. The design process was a team approach, with input from national experts, patients and families, hospital staff and physicians, architects, contractors, and the community. The new facility, designed using safety-driven design principles, reflects many innovative design elements, including truly standardized patient rooms, new technology to minimize falls, and patient care alcoves for every patient room. The new hospital has been designed with maximum adaptability and flexibility in mind, to accommodate changes and provide for future growth. The architects labeled the innovative design. The Synergy Model, to describe the process of shaping the entire building and its spaces to work efficiently as a whole for the care and safety of patients. Construction began on the new facility in August 2003 and is expected to be completed in 2005.

Standardized Curriculum for Electrician.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: electrician I and II. The 11 units in electrician I are as follows: orientation; safety; tools, equipment, materials/supplies; basic principles and theory; DC circuits; AC circuits; blueprints and load calculations; load centers and…

Epidemiology and Clinical Research Design, Part 2: Principles

PubMed Central

Manja, Veena; Lakshminrusimha, Satyan

2015-01-01

This is the third article covering core knowledge in scholarly activities for neonatal physicians. In this article, we discuss various principles of epidemiology and clinical research design. A basic knowledge of these principles is necessary for conducting clinical research and for proper interpretation of studies. This article reviews bias and confounding, causation, incidence and prevalence, decision analysis, cost-effectiveness, sensitivity analysis, and measurement. PMID:26236171

Basic Design, a Needed Foundation for Designing a Successful Garment: A Case Study of Dressmakers in the Ho Municipality, Volta Region, Ghana

ERIC Educational Resources Information Center

Gbetodeme, Selom; Amankwa, Joana; Dzegblor, Noble Komla

2016-01-01

To facilitate the design process in every art form, there are certain guidelines that all professional designers should use. These are known as elements and principles of design. This study is a survey carried out to assess the knowledge of dressmakers about basic design in the Ho Municipality of Ghana. Sixty dressmakers were randomly sampled for…

Patient safety principles in family medicine residency accreditation standards and curriculum objectives

PubMed Central

Kassam, Aliya; Sharma, Nishan; Harvie, Margot; O’Beirne, Maeve; Topps, Maureen

2016-01-01

Abstract Objective To conduct a thematic analysis of the College of Family Physicians of Canada’s (CFPC’s) Red Book accreditation standards and the Triple C Competency-based Curriculum objectives with respect to patient safety principles. Design Thematic content analysis of the CFPC’s Red Book accreditation standards and the Triple C curriculum. Setting Canada. Main outcome measures Coding frequency of the patient safety principles (ie, patient engagement; respectful, transparent relationships; complex systems; a just and trusting culture; responsibility and accountability for actions; and continuous learning and improvement) found in the analyzed CFPC documents. Results Within the analyzed CFPC documents, the most commonly found patient safety principle was patient engagement (n = 51 coding references); the least commonly found patient safety principles were a just and trusting culture (n = 5 coding references) and complex systems (n = 5 coding references). Other patient safety principles that were uncommon included responsibility and accountability for actions (n = 7 coding references) and continuous learning and improvement (n = 12 coding references). Conclusion Explicit inclusion of patient safety content such as the use of patient safety principles is needed for residency training programs across Canada to ensure the full spectrum of care is addressed, from community-based care to acute hospital-based care. This will ensure a patient safety culture can be cultivated from residency and sustained into primary care practice. PMID:27965349

Second thoughts about privacy, safety and deception

NASA Astrophysics Data System (ADS)

Sorell, Tom; Draper, Heather

2017-07-01

In this paper, we point out some difficulties with interpreting three of five principles formulated at a retreat on robot ethics sponsored by the Arts and Humanities Council and the Engineering and Physical Sciences Research Council. We also attempt to iron out some conflicts between the principles. Some of the difficulties arise from the way that the autonomy of robot users - their capacity to live by their own choices - can be a goal in the design of care robots. We discuss (a) problems for Principle 2 that arise from competing legal and philosophical understandings of privacy; (b) a tension between privacy and safety (Principles 2 and 3) and (c) some scepticism about the application of Principle 4, which addresses robot design that might result in the deception of vulnerable users.

Zebrafish housing systems: a review of basic operating principles and considerations for design and functionality.

PubMed

Lawrence, Christian; Mason, Timothy

2012-01-01

The strategies for housing zebrafish used in biomedical research have evolved considerably over the past three decades. To keep pace with the rapid expansion and development of the zebrafish model system, the field has generally moved from keeping fish at the level of aquarium hobbyist to that of industrialized, recirculating aquaculture. Numerous commercial system vendors now offer increasingly sophisticated housing systems based on design principles that maximize the number of animals that can be housed in a given space footprint, and they are thus able to support large and diverse research programs. This review is designed to provide managers, lab animal veterinarians, investigators, and other parties responsible for care and use of these animals with a comprehensive overview of the basic operating and design principles of zebrafish housing systems. This information can be used to help plan the construction of new facilities and/or the upgrade and maintenance of existing operations.

Basic Electronics.

ERIC Educational Resources Information Center

Hartman, Lonnie; Huston, Jane, Ed.

The skills taught in these materials for a seven-unit course were those identified as necessary not only for entry-level electronic technicians but for those in other occupations as well, including appliance repair, heating and air conditioning, and auto mechanics. The seven units are on shop orientation and safety principles, introduction to…

Car Stopping Distance on a Tabletop

ERIC Educational Resources Information Center

Haugland, Ole Anton

2013-01-01

Stopping distances in car braking can be an intriguing topic in physics teaching. It illustrates some basic principles of physics, and sheds valuable light on students' attitude towards aggressive driving. Due to safety considerations, it can be difficult to make experiments with actual car braking. (Contains 2 figures.)

A Curriculum Guide for Electricity/Electronics.

ERIC Educational Resources Information Center

Rouse, Bill, Comp.

This curriculum guide is designed to upgrade the secondary electrical trades program in Mississippi by broadening its scope to incorporate basic electronic principles. Covered in the individual chapters of the guide are the following courses: basic electricity (occupational information, basic physics, circuit fundamentals, resistance and Ohm's…

Basic Electronics I.

ERIC Educational Resources Information Center

Robertson, L. Paul

Designed for use in basic electronics programs, this curriculum guide is comprised of twenty-nine units of instruction in five major content areas: Orientation, Basic Principles of Electricity/Electronics, Fundamentals of Direct Current, Fundamentals of Alternating Current, and Applying for a Job. Each instructional unit includes some or all of…

Standardized Curriculum for Electricity/Electronics.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized vocational education course titles and core contents are provided for two courses in Mississippi: electricity/electronics I and II. The first course contains the following units: (1) orientation, safety, and leadership; (2) basic principles of electricity/electronics; (3) direct current (DC) theory; (4) magnetism and DC motors; (5)…

From Barrier Free to Safe Environments: The New Zealand Experience. Monograph #44.

ERIC Educational Resources Information Center

Wrightson, William; Pope, Campbell

Intrinsically safe design is presented as a logical extension of the principles of barrier free design, and as a higher level design strategy for effecting widespread implementation of the basic accessibility requirements for people with disabilities. Two fundamental planning procedures are proposed: including principles of safe and accessible…

EPSRC Principles of Robotics: commentary on safety, robots as products, and responsibility

NASA Astrophysics Data System (ADS)

Boddington, Paula

2017-04-01

The EPSRC Principles of Robotics refer to safety. How safety is understood is relative to how tasks are characterised and identified. But the exact task(s) a robot plays within a complex system of agency may be hard to identify. If robots are seen as products, it is nonetheless vital that the safety and other implications of their use in situ must also be considered carefully, and they must be fit for purpose. The Principles identify humans as responsible, rather than robots. We must thus understand how the replacement of human agency by robotic agency may impact upon attributions of responsibility. The Principles seek to fit into existing systems of law and ethics. But these may need development, and in certain context, attention to more local regulations is also needed. A distinction between ethical issues related to the design of robotics, and to their use, may be needed in the Principles.

Practical ways to facilitate ergonomics improvements in occupational health practice.

PubMed

Kogi, Kazutaka

2012-12-01

Recent advances in participatory programs for improving workplace conditions are discussed to examine practical ways to facilitate ergonomics improvements. Participatory training programs are gaining importance, particularly in promoting occupational health and safety in small-scale workplaces. These programs have led to many improvements that can reduce work-related risks in varied situations. Recent experiences in participatory action-oriented training programs in small workplaces and agriculture are reviewed.The emphasis of the review is on training steps, types of improvements achieved, and the use of action tools by trainers and training participants. Immediate improvements in multiple technical areas are targeted, including materials handling,workstation design, physical environment, welfare facilities, and work organization. In facilitating ergonomics improvements in each local situation, it is important to focus on (a) building on local good practices; (b) applying practical, simple improvements that apply the basic principles of ergonomics; and (c) developing action-oriented toolkits for direct use by workers and managers. This facilitation process is effective when locally designed action toolkits are used by trainers, including local good examples, action checklists, and illustrated how-to guides. Intervention studies demonstrate the effectiveness of participatory steps that use these toolkits in promoting good practices and reducing work-related risks. In facilitating ergonomics improvements in small-scale workplaces, it is important to focus on practical, low-cost improvements that build on local good practices. The use of action-oriented toolkits reflecting basic ergonomics principles is helpful.The promotion of the intercountry networking of positive experiences in participatory training is suggested.

A Lemon Cell Battery for High-Power Applications

ERIC Educational Resources Information Center

Muske, Kenneth R.; Nigh, Christopher W.; Weinstein, Randy D.

2007-01-01

The use of lemon cell battery to run an electric DC motor is demonstrated for chemistry students. This demonstration aids the students in understanding principles behind the design and construction of the lemon cell battery and principles governing the electric DC motor and other basic principles.

Member Takes Action Against Violence.

ERIC Educational Resources Information Center

Bertholf, Deedrick

1999-01-01

An ASBO member and chair of New York's School Emergency Response to Violent Events (SERVE) explains how this program tackles violence and teen suicide. SERVE teaches the basic principles of hostage situations, uses a confidential reporting system, and advocates safety audits and risk-reduction strategies. (MLH)

Fire safety

Treesearch

Robert H. White; Mark A. Dietenberger

1999-01-01

Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Since basic data on fire behavior of wood products...

Visual Design Principles Applied To World Wide Web Construction.

ERIC Educational Resources Information Center

Luck, Donald D.; Hunter, J. Mark

This paper describes basic types of World Wide Web pages and presents design criteria for page layout based on principles of visual literacy. Discussion focuses on pages that present information in the following styles: billboard; directory/index; textual; and graphics. Problems and solutions in Web page construction are explored according to…

Heat Transfer Principles in Thermal Calculation of Structures in Fire

PubMed Central

Zhang, Chao; Usmani, Asif

2016-01-01

Structural fire engineering (SFE) is a relatively new interdisciplinary subject, which requires a comprehensive knowledge of heat transfer, fire dynamics and structural analysis. It is predominantly the community of structural engineers who currently carry out most of the structural fire engineering research and design work. The structural engineering curriculum in universities and colleges do not usually include courses in heat transfer and fire dynamics. In some institutions of higher education, there are graduate courses for fire resistant design which focus on the design approaches in codes. As a result, structural engineers who are responsible for structural fire safety and are competent to do their jobs by following the rules specified in prescriptive codes may find it difficult to move toward performance-based fire safety design which requires a deep understanding of both fire and heat. Fire safety engineers, on the other hand, are usually focused on fire development and smoke control, and may not be familiar with the heat transfer principles used in structural fire analysis, or structural failure analysis. This paper discusses the fundamental heat transfer principles in thermal calculation of structures in fire, which might serve as an educational guide for students, engineers and researchers. Insights on problems which are commonly ignored in performance based fire safety design are also presented. PMID:26783379

Toxic release consequence analysis tool (TORCAT) for inherently safer design plant.

PubMed

Shariff, Azmi Mohd; Zaini, Dzulkarnain

2010-10-15

Many major accidents due to toxic release in the past have caused many fatalities such as the tragedy of MIC release in Bhopal, India (1984). One of the approaches is to use inherently safer design technique that utilizes inherent safety principle to eliminate or minimize accidents rather than to control the hazard. This technique is best implemented in preliminary design stage where the consequence of toxic release can be evaluated and necessary design improvements can be implemented to eliminate or minimize the accidents to as low as reasonably practicable (ALARP) without resorting to costly protective system. However, currently there is no commercial tool available that has such capability. This paper reports on the preliminary findings on the development of a prototype tool for consequence analysis and design improvement via inherent safety principle by utilizing an integrated process design simulator with toxic release consequence analysis model. The consequence analysis based on the worst-case scenarios during process flowsheeting stage were conducted as case studies. The preliminary finding shows that toxic release consequences analysis tool (TORCAT) has capability to eliminate or minimize the potential toxic release accidents by adopting the inherent safety principle early in preliminary design stage. 2010 Elsevier B.V. All rights reserved.

Safety and design in airplane construction

NASA Technical Reports Server (NTRS)

Teichmann, Alfred

1934-01-01

The author gives a survey of the principles of stress analysis and design of airplane structures, and discusses the fundamental strength specifications and their effect on the stress analysis as compared with the safety factors used in other branches of engineering.

History of nuclear technology development in Japan

NASA Astrophysics Data System (ADS)

Yamashita, Kiyonobu

2015-04-01

Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.

History of nuclear technology development in Japan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamashita, Kiyonobu, E-mail: yamashita.kiyonobu@jaea.go.jp; General Advisor Nuclear HRD Centre, Japan Atomic Energy Agency, TOKAI-mura, NAKA-gun, IBARAKI-ken, 319-1195

2015-04-29

Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.

Investigation on scalable high-power lasers with enhanced 'eye-safety' for future weapon systems

NASA Astrophysics Data System (ADS)

Bigotta, S.; Diener, K.; Eichhorn, M.; Galecki, L.; Geiss, L.; Ibach, T.; Scharf, H.; von Salisch, M.; Schöner, J.; Vincent, G.

2016-10-01

The possible use of lasers as weapons becomes more and more interesting for military forces. Besides the generation of high laser power and good beam quality, also safety considerations, e. g. concerning eye hazards, are of importance. The MELIAS (medium energy laser in the "eye-safe" spectral domain) project of ISL addresses these issues, and ISL has developed the most powerful solid-state laser in the "eye-safe" wavelength region up to now. "Eye safety" in this context means that light at a wavelength of > 1.4 μm does not penetrate the eye and thus will not be focused onto the retina. The basic principle of this technology is that a laser source needs to be scalable in power to far beyond 100 kW without a significant deterioration in beam quality. ISL has studied a very promising laser technology: the erbium heat-capacity laser. This type of laser is characterised by a compact design, a simple and robust technology and a scaling law which, in principle, allows the generation of laser power far beyond megawatts at small volumes. Previous investigations demonstrated the scalability of the SSHCL and up to 4.65 kW and 440 J in less than 800 ms have been obtained. Opticalto- optical efficiencies of over 41% and slope efficiencies of over 51% are obtained. The residual thermal gradients, due to non perfect pumping homogeneity, negatively affect the performance in terms of laser pulse energy, duration and beam quality. In the course of the next two years, ISL will be designing a 25 to 30 kW erbium heat-capacity laser.

Chemical Frustration. A Design Principle for the Discovery of New Complex Alloy and Intermetallic Phases, Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fredrickson, Daniel C

2015-06-23

Final technical report for "Chemical Frustration: A Design Principle for the Discovery of New Complex Alloy and Intermetallic Phases" funded by the Office of Science through the Materials Chemistry Program of the Office of Basic Energy Sciences.

49 CFR Appendix B to Part 236 - Risk Assessment Criteria

Code of Federal Regulations, 2010 CFR

2010-10-01

... results of the application of safety design principles as noted in Appendix C to this part. The MTTHE is... fault/failure analysis must be based on the assessment of the design and implementation of all safety... associated device drivers, as well as historical performance data, analytical methods and experimental safety...

49 CFR Appendix B to Part 236 - Risk Assessment Criteria

Code of Federal Regulations, 2013 CFR

2013-10-01

... results of the application of safety design principles as noted in Appendix C to this part. The MTTHE is... fault/failure analysis must be based on the assessment of the design and implementation of all safety... associated device drivers, as well as historical performance data, analytical methods and experimental safety...

Safe design of healthcare facilities

PubMed Central

Reiling, J

2006-01-01

The physical environment has a significant impact on health and safety; however, hospitals have not been designed with the explicit goal of enhancing patient safety through facility design. In April 2002, St Joseph's Community Hospital of West Bend, a member of SynergyHealth, brought together leaders in healthcare and systems engineering to develop a set of safety‐driven facility design recommendations and principles that would guide the design of a new hospital facility focused on patient safety. By introducing safety‐driven innovations into the facility design process, environmental designers and healthcare leaders will be able to make significant contributions to patient safety. PMID:17142606

The Basic Principles and Methods of the System Approach to Compression of Telemetry Data

NASA Astrophysics Data System (ADS)

Levenets, A. V.

2018-01-01

The task of data compressing of measurement data is still urgent for information-measurement systems. In paper the basic principles necessary for designing of highly effective systems of compression of telemetric information are offered. A basis of the offered principles is representation of a telemetric frame as whole information space where we can find of existing correlation. The methods of data transformation and compressing algorithms realizing the offered principles are described. The compression ratio for offered compression algorithm is about 1.8 times higher, than for a classic algorithm. Thus, results of a research of methods and algorithms showing their good perspectives.

Fire safety of wood construction

Treesearch

Robert H. White; Mark A. Dietenberger

2010-01-01

Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements and related fire performance data are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Because basic data...

A comparison of food safety knowledge among restaurant managers, by source of training and experience, in Oklahoma County, Oklahoma.

PubMed

Lynch, Robert A; Elledge, Brenda L; Griffith, Charles C; Boatright, Daniel T

2003-09-01

The annual incidence of illness related to food consumption continues to present a challenge to environmental health management. A significant fraction of cases have been attributed to consumption of food in restaurants, and as the number of meals eaten away from the home continues to rise, the potential for large-scale foodborne-disease outbreaks will continue to increase. Food handlers in retail establishments contribute to the incidence of foodborne disease; therefore, it is essential that workers and management staff have a thorough understanding of safe food practices. Since the training, certification, and experience of food service managers vary greatly, it is also likely that managers' knowledge base may differ. In the study reported here, restaurant managers were administered a survey designed to measure their understanding of basic food safety principles. The sources of training, certification, and experience were found to significantly affect the level of food safety knowledge; however, increased hours of training did not increase knowledge. In addition, the time lapsed since training did not significantly affect the level of knowledge.

Curriculum and Evaluation Guide for Safety Education Programs. Research and Evaluation Report Series No. 40.00.

ERIC Educational Resources Information Center

Lowry, Carlee S.

Designed to assist Bureau of Indian Affairs school officials in the identification of safety education program needs, this evaluation guide focuses upon the basic operational components in a safety education program. The means for establishing an evaluation design for safety education are presented via a flexible model appropriate for most…

International Law and Military Operations

DTIC Science & Technology

2008-01-01

Operations Concept, which addresses the operational principles that will be used by the services; 12 and the US Coast Guard Strategy for Maritime Safety ...Maslow’s hierarchy of human needs, the need fo r security is exceeded only by basic needs, e.g., food . 60 Professor Colin Gray asserts that "order is the...certainly for the Coast Guard and other interagency players with maritime safety and security missions. The new strategy must also acknowledge that

The New Jersey Cooperative Home Economics Education Handbook. Part B: The Curriculum.

ERIC Educational Resources Information Center

Spencer, Dorothy

This guide is intended for use with students enrolled in cooperative occupational home economics programs. The following topics are covered in the individual modules: the basic principles of cooperative home economics; preparation for the world of work (choosing, finding, applying for, and exploring a job); safety, security, and sanitation (on and…

What You Always Wanted to Know About Monitoring Naval Ship Construction but You Did Not Dare Ask.

DTIC Science & Technology

1990-06-01

CONCEPTUAL DESIGN For the conceptual design of the management efforts, we quote the Principles of Management , as they were presented by Fayol (Ret. l:p...functional groups. The five basic principles of management theory are: Planning, Organizing, Staffing, Directing, and Controlling. These principles... Principles of Management , McGraw-Hill, 1978. 16. ibid. 70 17. ibid. 18. ibid. 19. ibid. 20. Wolfe, P.M., Cochran E.B., and Thompson, W.J., A BERTS- Based

Zebrafish Housing Systems: A Review of Basic Operating Principles and Considerations for Design and Functionality

PubMed Central

Lawrence, Christian; Mason, Timothy

2015-01-01

The strategies for housing zebrafish used in biomedical research have evolved considerably over the past three decades. To keep pace with the rapid expansion and development of the zebrafish model system, the field has generally moved from keeping fish at the level of aquarium hobbyist to that of industrialized, recirculating aquaculture. Numerous commercial system vendors now offer increasingly sophisticated housing systems based on design principles that maximize the number of animals that can be housed in a given space footprint, and they are thus able to support large and diverse research programs. This review is designed to provide managers, lab animal veterinarians, investigators, and other parties responsible for care and use of these animals with a comprehensive overview of the basic operating and design principles of zebrafish housing systems. This information can be used to help plan the construction of new facilities and/or the upgrade and maintenance of existing operations. PMID:23382349

The principle of safety evaluation in medicinal drug - how can toxicology contribute to drug discovery and development as a multidisciplinary science?

PubMed

Horii, Ikuo

2016-01-01

Pharmaceutical (drug) safety assessment covers a diverse science-field in the drug discovery and development including the post-approval and post-marketing phases in order to evaluate safety and risk management. The principle in toxicological science is to be placed on both of pure and applied sciences that are derived from past/present scientific knowledge and coming new science and technology. In general, adverse drug reactions are presented as "biological responses to foreign substances." This is the basic concept of thinking about the manifestation of adverse drug reactions. Whether or not toxic expressions are extensions of the pharmacological effect, adverse drug reactions as seen from molecular targets are captured in the category of "on-target" or "off-target", and are normally expressed as a biological defense reaction. Accordingly, reactions induced by pharmaceuticals can be broadly said to be defensive reactions. Recent molecular biological conception is in line with the new, remarkable scientific and technological developments in the medical and pharmaceutical areas, and the viewpoints in the field of toxicology have shown that they are approaching toward the same direction as well. This paper refers to the basic concept of pharmaceutical toxicology, the differences for safety assessment in each stage of drug discovery and development, regulatory submission, and the concept of scientific considerations for risk assessment and management from the viewpoint of "how can multidisciplinary toxicology contribute to innovative drug discovery and development?" And also realistic translational research from preclinical to clinical application is required to have a significant risk management in post market by utilizing whole scientific data derived from basic and applied scientific research works. In addition, the significance for employing the systems toxicology based on AOP (Adverse Outcome Pathway) analysis is introduced, and coming challenges on precision medicine are to be addressed for the new aspect of efficacy and safety evaluation.

The development of neural stimulators: a review of preclinical safety and efficacy studies.

PubMed

Shepherd, Robert K; Villalobos, Joel; Burns, Owen; Nayagam, David

2018-05-14

Given the rapid expansion of the field of neural stimulation and the rigorous regulatory approval requirements required before these devices can be applied clinically, it is important that there is clarity around conducting preclinical safety and efficacy studies required for the development of this technology. The present review examines basic design principles associated with the development of a safe neural stimulator and describes the suite of preclinical safety studies that need to be considered when taking a device to clinical trial. Neural stimulators are active implantable devices that provide therapeutic intervention, sensory feedback or improved motor control via electrical stimulation of neural or neuro-muscular tissue in response to trauma or disease. Because of their complexity, regulatory bodies classify these devices in the highest risk category (Class III), and they are therefore required to go through a rigorous regulatory approval process before progressing to market. The successful development of these devices is achieved through close collaboration across disciplines including engineers, scientists and a surgical/clinical team, and the adherence to clear design principles. Preclinical studies form one of several key components in the development pathway from concept to product release of neural stimulators. Importantly, these studies provide iterative feedback in order to optimise the final design of the device. Key components of any preclinical evaluation include: in vitro studies that are focussed on device reliability and include accelerated testing under highly controlled environments; in vivo studies using animal models of the disease or injury in order to assess safety and, given an appropriate animal model, the efficacy of the technology under both passive and electrically active conditions; and human cadaver and ex vivo studies designed to ensure the device's form factor conforms to human anatomy, to optimise the surgical approach and to develop any specialist surgical tooling required. The pipeline from concept to commercialisation of these devices is long and expensive; careful attention to both device design and its preclinical evaluation will have significant impact on the duration and cost associated with taking a device through to commercialisation. Carefully controlled in vitro and in vivo studies together with ex vivo and human cadaver trials are key components of a thorough preclinical evaluation of any new neural stimulator. © 2018 IOP Publishing Ltd.

AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT III, AUTOMATIC TRANSMISSIONS--HYDRAULICS (PART I).

ERIC Educational Resources Information Center

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO INTRODUCE BASIC HYDRAULIC PRINCIPLES AND PROVIDE AN UNDERSTANDING OF HYDRAULIC TRANSMISSIONS USED IN DIESEL POWERED VEHICLES. TOPICS ARE WHY USE HYDRAULICS, REVIEWING BASIC PHYSICS LAWS IN RELATION TO HYDRAULICS, UNDERSTANDING THE HYDRAULIC SYSTEM, AND DEVELOPING A BASIC HYDRAULIC SYSTEM. THE MODULE…

Electrical impedance spectroscopy for quality assessment of meat and fish: A review on basic principles, measurement methods, and recent advances

USDA-ARS?s Scientific Manuscript database

Electrical impedance spectroscopy (EIS), as an effective analytical technique for electrochemical system, has shown a wide application for food quality and safety assessment recently. Individual differences of livestock cause high variation in quality of raw meat and fish and their commercialized pr...

New silicon cell design concepts for 20 percent AMI efficiency

NASA Technical Reports Server (NTRS)

Wolf, M.

1982-01-01

The basic design principles for obtaining high efficiency in silicon solar cells are reviewed. They critically involve very long minority carrier lifetimes, not so much to attain high collection efficiency, but primarily for increased output voltages. Minority carrier lifetime, however, is sensitive to radiation damage, and particularly in low resistivity silicon, on which the high efficiency design is based. Radiation resistant space cells will therefore have to follow differing design principles than high efficiency terrestrial cells.

Designing future landscapes from principles of form and function

Treesearch

Larry D. Harris; Patrick Kangas

1979-01-01

Future landscapes will consist of a gradient of types ranging from wilderness areas to totally "humanized" environments. The man-dominated landscapes will be required to fulfill multiple functions only one of which is aesthetic enjoyment. It is suggested that basic principles of form and function may contribute to design criteria. Applications to the...

Justification of system of assessment of ecological safety degree of housing construction objects

NASA Astrophysics Data System (ADS)

Kankhva, Vadim

2017-10-01

In article characteristics and properties of competitiveness of housing construction objects are investigated, criteria and points of national systems of ecological building’s standardization are structured, the compliance assessment form on stages of life cycle of a capital construction project is developed. The main indicators of level of ecological safety considering requirements of the international ISO standards 9000 and ISO 14000 and which are based on the basic principles of general quality management (TQM) are presented.

Essentials of Risk Management. Strategic Decisions. Board Basics.

ERIC Educational Resources Information Center

Sonenstein, Burton; Kumin, Laura A.

1998-01-01

This booklet, intended for trustees of institutions of higher education, offers some instruction on the principles of risk management. Introductory information provides a definition of risk management, which is seen as a planning and strategic function, not solely as a financial or safety assessment. Individual sections then address the following…

Diesel Fundamentals. Teacher Edition (Revised).

ERIC Educational Resources Information Center

Clark, Elton; And Others

This module is one of a series of teaching guides that cover diesel mechanics. The module contains 4 sections and 19 units. Section A--Orientation includes the following units: introduction to diesel mechanics and shop safety; basic shop tools; test equipment and service tools; fasteners; bearings; and seals. Section B--Engine Principles and…

BACTEROLOGICAL EXAMINATION OF WATER

EPA Science Inventory

This presentation will focus on basic elements of water bacteriology. The presentation will be part of a seminar entitled, "Microbiology 101." This seminar is designed to provide general information regarding various microorganisms, e.g., bacteria, virus, protozoa. Basic principl...

Stiffness Parameter Design of Suspension Element of Under-Chassis-Equipment for A Rail Vehicle

NASA Astrophysics Data System (ADS)

Ma, Menglin; Wang, Chengqiang; Deng, Hai

2017-06-01

According to the frequency configuration requirements of the vibration of railway under-chassis-equipment, the three- dimension stiffness of the suspension elements of under-chassis-equipment is designed based on the static principle and dynamics principle. The design results of the concrete engineering case show that, compared with the design method based on the static principle, the three- dimension stiffness of the suspension elements designed by the dynamic principle design method is more uniform. The frequency and decoupling degree analysis show that the calculation frequency of under-chassis-equipment under the two design methods is basically the same as the predetermined frequency. Compared with the design method based on the static principle, the design method based on the dynamic principle is adopted. The decoupling degree can be kept high, and the coupling vibration of the corresponding vibration mode can be reduced effectively, which can effectively reduce the fatigue damage of the key parts of the hanging element.

Universal design characteristic on themed streets

NASA Astrophysics Data System (ADS)

Harsritanto, Bangun IR; Indriastjario; Wijayanti

2017-12-01

People around the world can access the streets to fulfil their daily activities regardless of their gender, age, and abilities. The streetscape is an urban public space which is built to facilitate the basic needs of people as social being. The themed street is an urban streetscape designed and built in detail with a theme or special purpose in an of urban development process. Universal design facilitates the full range of human diversity as physical appearance, perception, cognitive abilities, sizes, and shapes. By designing for the diversity, the specialized streets become more functional and user-friendly. The purpose of this study is to examine several design characteristics of themed streets in several countries from three different continents using universal design principles for giving proper directions to develop more user-friendly streets. Literature review and case study were used as research methods. The literature review was extracted and compiled from manuscripts, streetscape design books, and from universal design principles. Furthermore, the constructed theory were used to examine the case studies of themed streets. The findings indicated that themed streets’ character design were strongly influenced by local cultural aspect even though the basic guidelines were universal design principles; the resumed design direction can be suggested universal along with the richness of local aspects.

The Design of a Practical Enterprise Safety Management System

NASA Astrophysics Data System (ADS)

Gabbar, Hossam A.; Suzuki, Kazuhiko

This book presents design guidelines and implementation approaches for enterprise safety management system as integrated within enterprise integrated systems. It shows new model-based safety management where process design automation is integrated with enterprise business functions and components. It proposes new system engineering approach addressed to new generation chemical industry. It will help both the undergraduate and professional readers to build basic knowledge about issues and problems of designing practical enterprise safety management system, while presenting in clear way, the system and information engineering practices to design enterprise integrated solution.

Arizona Traffic Safety Education, K-3. Pedestrian Safety, Grade 3.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains nine lessons on pedestrian safety for use in grade 3. Introductory information provided for the teacher includes basic highway safety concepts, stressing communication methods for…

Arizona Traffic Safety Education, K-8. Pedestrian Safety, Grade 2.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains eight lessons on pedestrian safety for use in grade 2. Introductory information provided for the teacher includes basic highway safety concepts, stressing communication methods for…

Arizona Traffic Safety Education, K-8. Pedestrian Safety, Grades K-1.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains thirteen lessons on pedestrian safety for use in kindergarten and grade 1. Introductory information provided for the teacher includes basic highway safety concepts, stressing…

Design principles of a microtubule polymerase

PubMed Central

Geyer, Elisabeth A; Miller, Matthew P; Brautigam, Chad A; Biggins, Sue

2018-01-01

Stu2/XMAP215 microtubule polymerases use multiple tubulin-binding TOG domains and a lattice-binding basic region to processively promote faster elongation. How the domain composition and organization of these proteins dictate polymerase activity, end localization, and processivity is unknown. We show that polymerase activity does not require different kinds of TOGs, nor are there strict requirements for how the TOGs are linked. We identify an unexpected antagonism between the tubulin-binding TOGs and the lattice-binding basic region: lattice binding by the basic region is weak when at least two TOGs engage tubulins, strong when TOGs are empty. End-localization of Stu2 requires unpolymerized tubulin, at least two TOGs, and polymerase competence. We propose a ‘ratcheting’ model for processivity: transfer of tubulin from TOGs to the lattice activates the basic region, retaining the polymerase at the end for subsequent rounds of tubulin binding and incorporation. These results clarify design principles of the polymerase. PMID:29897335

Report on the CDE Examination

ERIC Educational Resources Information Center

Haga, Enoch J.

1971-01-01

The Certificate in Data Education (Basic) examination is designed to certify that successful candidates are academically proficient in those principles and concepts of automation, computing, and data processing (including social and user implications) which are usually taught in basic introductory courses at the college or university level. (CK)

Common computational properties found in natural sensory systems

NASA Astrophysics Data System (ADS)

Brooks, Geoffrey

2009-05-01

Throughout the animal kingdom there are many existing sensory systems with capabilities desired by the human designers of new sensory and computational systems. There are a few basic design principles constantly observed among these natural mechano-, chemo-, and photo-sensory systems, principles that have been proven by the test of time. Such principles include non-uniform sampling and processing, topological computing, contrast enhancement by localized signal inhibition, graded localized signal processing, spiked signal transmission, and coarse coding, which is the computational transformation of raw data using broadly overlapping filters. These principles are outlined here with references to natural biological sensory systems as well as successful biomimetic sensory systems exploiting these natural design concepts.

High frequency x-ray generator basics.

PubMed

Sobol, Wlad T

2002-02-01

The purpose of this paper is to present basic functional principles of high frequency x-ray generators. The emphasis is put on physical concepts that determine the engineering solutions to the problem of efficient generation and control of high voltage power required to drive the x-ray tube. The physics of magnetically coupled circuits is discussed first, as a background for the discussion of engineering issues related to high-frequency power transformer design. Attention is paid to physical processes that influence such factors as size, efficiency, and reliability of a high voltage power transformer. The basic electrical circuit of a high frequency generator is analyzed next, with focus on functional principles. This section investigates the role and function of basic components, such as power supply, inverter, and voltage doubler. Essential electronic circuits of generator control are then examined, including regulation of voltage, current and timing of electrical power delivery to the x-ray tube. Finally, issues related to efficient feedback control, including basic design of the AEC circuitry are reviewed.

Learning theories 101: application to everyday teaching and scholarship.

PubMed

Kay, Denise; Kibble, Jonathan

2016-03-01

Shifts in educational research, in how scholarship in higher education is defined, and in how funding is appropriated suggest that educators within basic science fields can benefit from increased understanding of learning theory and how it applies to classroom practice. This article uses a mock curriculum design scenario as a framework for the introduction of five major learning theories. Foundational constructs and principles from each theory and how they apply to the proposed curriculum designs are described. A summative table that includes basic principles, constructs, and classroom applications as well as the role of the teacher and learner is also provided for each theory. Copyright © 2016 The American Physiological Society.

What deserves our respect? Reexamination of respect for autonomy in the context of the management of chronic conditions.

PubMed

Enzo, Aya; Okita, Taketoshi; Asai, Atsushi

2018-05-29

The global increase in patients with chronic conditions has led to increased interest in ethical issues regarding such conditions. A basic biomedical principle-respect for autonomy-is being reexamined more critically in its clinical implications. New accounts of this basic principle are being proposed. While new accounts of respect for autonomy do underpin the design of many public programs and policies worldwide, addressing both chronic disease management and health promotion, the risk of applying such new accounts to clinical setting remain understudied. However, the application of new accounts of respect for autonomy to clinical settings could support disrespectful attitudes toward or undue interference with patients with chronic conditions. Reconsidering autonomy and respect using Kantian accounts, this paper proposes respect for persons as an alternative basic bioethical principle to respect for autonomy. Unlike the principle of respect for persons in the Belmont Report, our principle involves respecting any patient's decisions, behaviors, emotions, or life-style regardless of his or her "autonomous" capabilities. Thus, attitudes toward patients should be no different irrespective of the assessment of their decisional or executive capabilities.

Methods for open innovation on a genome-design platform associating scientific, commercial, and educational communities in synthetic biology.

PubMed

Toyoda, Tetsuro

2011-01-01

Synthetic biology requires both engineering efficiency and compliance with safety guidelines and ethics. Focusing on the rational construction of biological systems based on engineering principles, synthetic biology depends on a genome-design platform to explore the combinations of multiple biological components or BIO bricks for quickly producing innovative devices. This chapter explains the differences among various platform models and details a methodology for promoting open innovation within the scope of the statutory exemption of patent laws. The detailed platform adopts a centralized evaluation model (CEM), computer-aided design (CAD) bricks, and a freemium model. It is also important for the platform to support the legal aspects of copyrights as well as patent and safety guidelines because intellectual work including DNA sequences designed rationally by human intelligence is basically copyrightable. An informational platform with high traceability, transparency, auditability, and security is required for copyright proof, safety compliance, and incentive management for open innovation in synthetic biology. GenoCon, which we have organized and explained here, is a competition-styled, open-innovation method involving worldwide participants from scientific, commercial, and educational communities that aims to improve the designs of genomic sequences that confer a desired function on an organism. Using only a Web browser, a participating contributor proposes a design expressed with CAD bricks that generate a relevant DNA sequence, which is then experimentally and intensively evaluated by the GenoCon organizers. The CAD bricks that comprise programs and databases as a Semantic Web are developed, executed, shared, reused, and well stocked on the secure Semantic Web platform called the Scientists' Networking System or SciNetS/SciNeS, based on which a CEM research center for synthetic biology and open innovation should be established. Copyright © 2011 Elsevier Inc. All rights reserved.

Influence: A Key to Successful Leadership

ERIC Educational Resources Information Center

Hoy, Wayne K.; Smith, Page A.

2007-01-01

Purpose: The purpose of this article is to examine and condense the literature on influence and persuasion. Design/methodology/approach: The article identifies basic principles of influence in the theoretical and research literature, which are supported by empirical study. Findings: Ten principles of influence were identified, empirical support…

Perspectives on the design of safer nanomaterials and manufacturing processes

NASA Astrophysics Data System (ADS)

Geraci, Charles; Heidel, Donna; Sayes, Christie; Hodson, Laura; Schulte, Paul; Eastlake, Adrienne; Brenner, Sara

2015-09-01

A concerted effort is being made to insert Prevention through Design principles into discussions of sustainability, occupational safety and health, and green chemistry related to nanotechnology. Prevention through Design is a set of principles, which includes solutions to design out potential hazards in nanomanufacturing including the design of nanomaterials, and strategies to eliminate exposures and minimize risks that may be related to the manufacturing processes and equipment at various stages of the lifecycle of an engineered nanomaterial.

System principles, mathematical models and methods to ensure high reliability of safety systems

NASA Astrophysics Data System (ADS)

Zaslavskyi, V.

2017-04-01

Modern safety and security systems are composed of a large number of various components designed for detection, localization, tracking, collecting, and processing of information from the systems of monitoring, telemetry, control, etc. They are required to be highly reliable in a view to correctly perform data aggregation, processing and analysis for subsequent decision making support. On design and construction phases of the manufacturing of such systems a various types of components (elements, devices, and subsystems) are considered and used to ensure high reliability of signals detection, noise isolation, and erroneous commands reduction. When generating design solutions for highly reliable systems a number of restrictions and conditions such as types of components and various constrains on resources should be considered. Various types of components perform identical functions; however, they are implemented using diverse principles, approaches and have distinct technical and economic indicators such as cost or power consumption. The systematic use of different component types increases the probability of tasks performing and eliminates the common cause failure. We consider type-variety principle as an engineering principle of system analysis, mathematical models based on this principle, and algorithms for solving optimization problems of highly reliable safety and security systems design. Mathematical models are formalized in a class of two-level discrete optimization problems of large dimension. The proposed approach, mathematical models, algorithms can be used for problem solving of optimal redundancy on the basis of a variety of methods and control devices for fault and defects detection in technical systems, telecommunication networks, and energy systems.

Basic coaxial mass driver reference design. [electromagnetic lunar launch

NASA Technical Reports Server (NTRS)

Kolm, H. H.

1977-01-01

The reference design for a basic coaxial mass driver is developed to illustrate the principles and optimization procedures on the basis of numerical integration by programmable pocket calculators. The four inch caliber system uses a single-coil bucket and a single-phase propulsion track with discrete coils, separately energized by capacitors. An actual driver would use multiple-coil buckets and an oscillatory multi-phase drive system. Even the basic, table-top demonstration system should in principle be able to achieve accelerations in the 1,000 m/sq sec range. Current densities of the order of 25 ka/sq cm, continuously achievable only in superconductors, are carried by an ordinary aluminum bucket coil for a short period in order to demonstrate the calculated acceleration. Ultimately the system can be lengthened and provided with a magnetically levitated, superconducting bucket to study levitation dynamics under quasi-steady-state conditions, and to approach lunar escape velocity in an evacuated tube.

Arizona Traffic Safety Education, K-8. Passenger Safety, Grade 3.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains four lessons and an appendix of school bus safety tips for use in grade 3. Introductory information provided for the teacher includes basic highway safety concepts, stressing…

Virtual Worlds; Real Learning: Design Principles for Engaging Immersive Environments

NASA Technical Reports Server (NTRS)

Wu (u. Sjarpm)

2012-01-01

The EMDT master's program at Full Sail University embarked on a small project to use a virtual environment to teach graduate students. The property used for this project has evolved our several iterations and has yielded some basic design principles and pedagogy for virtual spaces. As a result, students are emerging from the program with a better grasp of future possibilities.

Does user-centred design affect the efficiency, usability and safety of CPOE order sets?

PubMed

Chan, Julie; Shojania, Kaveh G; Easty, Anthony C; Etchells, Edward E

2011-05-01

Application of user-centred design principles to Computerized provider order entry (CPOE) systems may improve task efficiency, usability or safety, but there is limited evaluative research of its impact on CPOE systems. We evaluated the task efficiency, usability, and safety of three order set formats: our hospital's planned CPOE order sets (CPOE Test), computer order sets based on user-centred design principles (User Centred Design), and existing pre-printed paper order sets (Paper). 27 staff physicians, residents and medical students. Sunnybrook Health Sciences Centre, an academic hospital in Toronto, Canada. Methods Participants completed four simulated order set tasks with three order set formats (two CPOE Test tasks, one User Centred Design, and one Paper). Order of presentation of order set formats and tasks was randomized. Users received individual training for the CPOE Test format only. Completion time (efficiency), requests for assistance (usability), and errors in the submitted orders (safety). 27 study participants completed 108 order sets. Mean task times were: User Centred Design format 273 s, Paper format 293 s (p=0.73 compared to UCD format), and CPOE Test format 637 s (p<0.0001 compared to UCD format). Users requested assistance in 31% of the CPOE Test format tasks, whereas no assistance was needed for the other formats (p<0.01). There were no significant differences in number of errors between formats. The User Centred Design format was more efficient and usable than the CPOE Test format even though training was provided for the latter. We conclude that application of user-centred design principles can enhance task efficiency and usability, increasing the likelihood of successful implementation.

Does user-centred design affect the efficiency, usability and safety of CPOE order sets?

PubMed Central

Chan, Julie; Shojania, Kaveh G; Easty, Anthony C

2011-01-01

Background Application of user-centred design principles to Computerized provider order entry (CPOE) systems may improve task efficiency, usability or safety, but there is limited evaluative research of its impact on CPOE systems. Objective We evaluated the task efficiency, usability, and safety of three order set formats: our hospital's planned CPOE order sets (CPOE Test), computer order sets based on user-centred design principles (User Centred Design), and existing pre-printed paper order sets (Paper). Participants 27staff physicians, residents and medical students. Setting Sunnybrook Health Sciences Centre, an academic hospital in Toronto, Canada. Methods Participants completed four simulated order set tasks with three order set formats (two CPOE Test tasks, one User Centred Design, and one Paper). Order of presentation of order set formats and tasks was randomized. Users received individual training for the CPOE Test format only. Main Measures Completion time (efficiency), requests for assistance (usability), and errors in the submitted orders (safety). Results 27 study participants completed 108 order sets. Mean task times were: User Centred Design format 273 s, Paper format 293 s (p=0.73 compared to UCD format), and CPOE Test format 637 s (p<0.0001 compared to UCD format). Users requested assistance in 31% of the CPOE Test format tasks, whereas no assistance was needed for the other formats (p<0.01). There were no significant differences in number of errors between formats. Conclusions The User Centred Design format was more efficient and usable than the CPOE Test format even though training was provided for the latter. We conclude that application of user-centred design principles can enhance task efficiency and usability, increasing the likelihood of successful implementation. PMID:21486886

Highway Maintenance Equipment Operator: Basic Core. Training Materials.

ERIC Educational Resources Information Center

Perky, Sandra Dutreau; And Others

This basic core curriculum is part of a three-part series of instructional guides designed for use in teaching a course in highway maintenance equipment operation. Addressed in the individual units of the curriculum, after an orientation unit, are safety; basic math; basic hand tools; procedures for loading. lashing, and unloading equipment;…

Core Competencies for Basic Drafting.

ERIC Educational Resources Information Center

Werner, Claire; Calderon, Ray

These competencies for drafting are designed to cover basic principles and practices for beginning drafters. Each competency appears in a one-page format. It is presented as a goal statement followed by one or more "indicator" statements, which are performance objectives describing an ability that, upon attainment, will establish…

Solar Photovoltaic DC Systems: Basics and Safety: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

McNutt, Peter F; Sekulic, William R; Dreifuerst, Gary

Solar Photovoltaic (PV) systems are common and growing with 42.4 GW installed capacity in U.S. (almost 15 GW added in 2016). This paper will help electrical workers, and emergency responders understand the basic operating principles and hazards of PV DC arrays. We briefly discuss the following aspects of solar photovoltaic (PV) DC systems: the effects of solar radiation and temperature on output power; PV module testing standards; common system configurations; a simple PV array sizing example; NEC guidelines and other safety features; DC array commissioning, periodic maintenance and testing; arc-flash hazard potential; how electrical workers and emergency responders can andmore » do work safely around PV arrays; do moonlight and artificial lighting pose a real danger; typical safe operating procedures; and other potential DC-system hazards to be aware of. We also present some statistics on PV DC array electrical incidents and injuries. Safe PV array operation is possible with a good understanding of PV DC arrays basics and having good safe operating procedures in place.« less

Arizona Traffic Safety Education, K-8. Passenger Safety, Grade 2.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains eight lessons for use in grade 2. Introductory information provided for the teacher includes basic highway safety concepts, stressing communication methods for highway users,…

Local Telephone Costs and the Design of Rate Structures,

DTIC Science & Technology

1981-05-01

guide the setting of prices for the multi-product regulated firm. Economic effi- ciency can be increased by designing rate structures that incorporate the... basic principles developed from this theory. These principles call for provisionally pricing each of the firm’s outputs at its marginal cost, testing...rule--prices are increased above marginal costs in inverse proportion to the individual price elasticities of demand. This paper applies ratemaking

Fundamentals of Diesel Engines.

ERIC Educational Resources Information Center

Marine Corps Inst., Washington, DC.

This student guide, one of a series of correspondence training courses designed to improve the job performance of members of the Marine Corps, deals with the fundamentals of diesel engine mechanics. Addressed in the three individual units of the course are the following topics: basic principles of diesel mechanics; principles, mechanics, and…

Developing More Effective Curriculum Via "Basic Stuff."

ERIC Educational Resources Information Center

Heitmann, Helen M.

Discussed is the design and development of a physical education curriculum, incorporating principles discussed in the "Basic Stuff" physical education series. Four tasks are suggested for planning the curriculum: (1) develop a unit for activity instruction, where the concepts inherent in the sport or activity skills may be identified; (2) develop…

Basic Principles of Magnetic Resonance Imaging—An Update

PubMed Central

Scherzinger, Ann L.; Hendee, William R.

1985-01-01

Magnetic resonance (MR) imaging technology has undergone many technologic advances over the past few years. Many of these advances were stimulated by the wealth of information emerging from nuclear magnetic resonance research in the areas of new and optimal scanning methods and radio-frequency coil design. Other changes arose from the desire to improve image quality, ease siting restrictions and generally facilitate the clinical use of MR equipment. Many questions, however, remain unanswered. Perhaps the most controversial technologic question involves the optimal field strength required for imaging or spectroscopic applications or both. Other issues include safety and clinical efficacy. Technologic issues affect all aspects of MR use including the choice of equipment, examination procedure and image interpretation. Thus, an understanding of recent changes and their theoretic basis is necessary. ImagesFigure 9. PMID:3911591

Just Culture: A Foundation for Balanced Accountability and Patient Safety

PubMed Central

Boysen, Philip G.

2013-01-01

Background The framework of a just culture ensures balanced accountability for both individuals and the organization responsible for designing and improving systems in the workplace. Engineering principles and human factors analysis influence the design of these systems so they are safe and reliable. Methods Approaches for improving patient safety introduced here are (1) analysis of error, (2) specific tools to enhance safety, and (3) outcome engineering. Conclusion The just culture is a learning culture that is constantly improving and oriented toward patient safety. PMID:24052772

On the Road to Safety and Health. A Manual for Road Crews.

ERIC Educational Resources Information Center

Chapnick, Ellen P.

This occupational safety and health handbook is designed for use as an educational tool in safety and health training classes for road workers. The first of six major sections, Caution Work Ahead, identifies principles of controlling hazards and discusses how the law can help improve safety and health conditions. Section 2 describes three common…

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ARRANGEMENT Hull Structure § 116.340 Alternate design considerations. The Commanding Officer, Marine Safety... does not meet the requirements of § 116.300, if it is shown by systematic analysis based on engineering principles that the vessel structure provides adequate safety and strength. An owner seeking approval of an...

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ARRANGEMENT Hull Structure § 116.340 Alternate design considerations. The Commanding Officer, Marine Safety... does not meet the requirements of § 116.300, if it is shown by systematic analysis based on engineering principles that the vessel structure provides adequate safety and strength. An owner seeking approval of an...

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ARRANGEMENT Hull Structure § 116.340 Alternate design considerations. The Commanding Officer, Marine Safety... does not meet the requirements of § 116.300, if it is shown by systematic analysis based on engineering principles that the vessel structure provides adequate safety and strength. An owner seeking approval of an...

Does this interface make my sensor look bad? Basic principles for designing usable, useful interfaces for sensor technology operators

NASA Astrophysics Data System (ADS)

McNamara, Laura A.; Berg, Leif; Butler, Karin; Klein, Laura

2017-05-01

Even as remote sensing technology has advanced in leaps and bounds over the past decade, the remote sensing community lacks interfaces and interaction models that facilitate effective human operation of our sensor platforms. Interfaces that make great sense to electrical engineers and flight test crews can be anxiety-inducing to operational users who lack professional experience in the design and testing of sophisticated remote sensing platforms. In this paper, we reflect on an 18-month collaboration which our Sandia National Laboratory research team partnered with an industry software team to identify and fix critical issues in a widely-used sensor interface. Drawing on basic principles from cognitive and perceptual psychology and interaction design, we provide simple, easily learned guidance for minimizing common barriers to system learnability, memorability, and user engagement.

Basic Laboratory Skills for Water and Wastewater Analysis. Report No. 125.

ERIC Educational Resources Information Center

Clark, Douglas W.

Designed for individuals wanting to acquire an introductory knowledge of basic skills necessary to function in a water or wastewater laboratory, this handbook emphasizes current use of routine equipment and proper procedures. Explanations and illustrations focus on underlying techniques and principles rather than processes for conducting specific…

Manned space flight nuclear system safety. Volume 6: Space base nuclear system safety plan

NASA Technical Reports Server (NTRS)

1972-01-01

A qualitative identification of the steps required to assure the incorporation of radiological system safety principles and objectives into all phases of a manned space base program are presented. Specific areas of emphasis include: (1) radiological program management, (2) nuclear system safety plan implementation, (3) impact on program, and (4) summary of the key operation and design guidelines and requirements. The plan clearly indicates the necessity of considering and implementing radiological system safety recommendations as early as possible in the development cycle to assure maximum safety and minimize the impact on design and mission plans.

AH-1S communication switch integration program

NASA Technical Reports Server (NTRS)

Haworth, Loran; Szoboszlay, Zoltan; Shively, Robert; Bick, Frank J.

1989-01-01

The C-6533/ARC communication system as installed on the test AH-1E Cobra helicopter was modified to allow discrete radio selection of all aircraft radios at the cyclic radio/intercommunication system switch. The current Cobra-fleet use of the C-6533 system is cumbersome, particularly during low-altitude operations. Operationally, the current system C-6533 configuration and design requires the pilot to estimate when he can safely remove his hand from an active flight control to select radios during low-altitude flight. The pilot must then physically remove his hand from the flight control, look inside the cockpit to select and verify the radio selection and then effect the selected radio transmission by activating the radio/ICS switch on the cyclic. This condition is potentially hazardous, especially during low-level flight at night in degraded weather. To improve pilot performance, communications effectiveness, and safety, manprint principles were utilized in the selection of a design modification. The modified C-6533 design was kept as basic as possible for potential Cobra-fleet modification. The communications system was modified and the design was subsequently flight-tested by the U.S. Army Aeroflightdynamics Directorate and NASA at the NASA Ames Research Center, Mountain View, California. The design modification enables the Cobra pilot to maintain hands-on flight controls while selecting radios during nap-of-the-Earth (NOE) flight without looking inside the cockpit which resulted in reduced pilot workload ratings, better pilot handling quality ratings and increased flight safety for the NOE flight environment.

Universal Design: Process, Principles, and Applications

ERIC Educational Resources Information Center

Burgstahler, Sheryl

2009-01-01

Designing any product or environment involves the consideration of many factors, including aesthetics, engineering options, environmental issues, safety concerns, industry standards, and cost. Typically, designers focus their attention on the average user. In contrast, universal design (UD), according to the Center for Universal Design," is…

Principles and safety measures of electrosurgery in laparoscopy.

PubMed

Alkatout, Ibrahim; Schollmeyer, Thoralf; Hawaldar, Nusrat A; Sharma, Nidhi; Mettler, Liselotte

2012-01-01

Electrosurgical units are the most common type of electrical equipment in the operating room. A basic understanding of electricity is needed to safely apply electrosurgical technology for patient care. We reviewed the literature concerning the essential biophysics, the incidence of electrosurgical injuries, and the possible mechanisms for injury. Various safety guidelines pertaining to avoidance of injuries were also reviewed. Electrothermal injury may result from direct application, insulation failure, direct coupling, capacitive coupling, and so forth. A thorough knowledge of the fundamentals of electrosurgery by the entire team in the operating room is essential for patient safety and for recognizing potential complications. Newer hemostatic technologies can be used to decrease the incidence of complications.

Principles and Safety Measures of Electrosurgery in Laparoscopy

PubMed Central

Alkatout, Ibrahim; Schollmeyer, Thoralf; Hawaldar, Nusrat A.; Sharma, Nidhi

2012-01-01

Background: Electrosurgical units are the most common type of electrical equipment in the operating room. A basic understanding of electricity is needed to safely apply electrosurgical technology for patient care. Methods: We reviewed the literature concerning the essential biophysics, the incidence of electrosurgical injuries, and the possible mechanisms for injury. Various safety guidelines pertaining to avoidance of injuries were also reviewed. Results: Electrothermal injury may result from direct application, insulation failure, direct coupling, capacitive coupling, and so forth. Conclusion: A thorough knowledge of the fundamentals of electrosurgery by the entire team in the operating room is essential for patient safety and for recognizing potential complications. Newer hemostatic technologies can be used to decrease the incidence of complications. PMID:22906341

KERENA safety concept in the context of the Fukushima accident

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zacharias, T.; Novotny, C.; Bielor, E.

Within the last three years AREVA NP and E.On KK finalized the basic design of KERENA which is a medium sized innovative boiling water reactor, based on the operational experience of German BWR nuclear power plants (NPPs). It is a generation III reactor design with a net electrical output of about 1250 MW. It combines active safety equipment of service-proven designs with new passive safety components, both safety classified. The passive systems utilize basic laws of physics, such as gravity and natural convection, enabling them to function without electric power. Even actuation of these systems is performed thanks to basicmore » physic laws. The degree of diversity in component and system design, achieved by combining active and passive equipment, results in a very low core damage frequency. The Fukushima accident enhanced the world wide discussion about the safety of operating nuclear power plants. World wide stress tests for operating nuclear power plants are being performed embracing both natural and man made hazards. Beside the assessment of existing power plants, also new designs are analyzed regarding the system response to beyond design base accidents. KERENA's optimal combination of diversified cooling systems (active and passive) allows passing efficiently such tests, with a high level of confidence. This paper describes the passive safety components and the KERENA reactor behavior after a Fukushima like accident. (authors)« less

Afghanistan in the Balance: Air Politik

DTIC Science & Technology

2010-06-01

satisfying basic physiological needs, such as food and water; then safety; love and belonging, esteem , and self -actualization. 17 In a contemporary...Instead, through an understanding of shared self -interests, states produce norms and standards of behavior that can be temporally enabling but are also...regime guided by the principles of the Peace of Westphalia (1648). This standard acknowledges the right of a state to self -determination. In this

Occupational Safety: Orientation to the World of Work.

ERIC Educational Resources Information Center

Evans, Clarence; Wills, Richard

The guide is one of a series of 10 units composing an orientation to the world of work course designed especially for disadvantaged and handicapped students in the ninth and tenth grades. It is designed to provide basic and remedial instruction in personal development, math, and language skills while providing information and skills basic or…

Fifth amendment taking and environmental protection under the police power: Historical development and a modest proposal to address the muddle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Root, T.E.; Dotterrer, I.L.

1995-12-01

Under its developing {open_quotes}just compensation{close_quotes} jurisprudence, the United States Supreme Court has applied the constitutional requirement (of just compensation for taking private property for public use) to overly intrusive regulations. The application of the just compensation clause to governmental environmental protection activity has pitted the basic principle of protection of private property from government confiscation against another basic principle-the police power (which allows the government to regulate the use of property to protect the health, safety, and welfare of the people). The authors outline the muddle resulting from the conflict of these two constitutional principles after tracing the development ofmore » each. This article first outlines the general trend of increasing regulation of the uses of private property under environmental laws pursuant to the police power, and then outlines the development of Fifth Amendment just compensation jurisprudence (from eminent domain, through inverse condemnation, to regulatory taking). The authors urge Congress to authorize a Commission to review exercise of the police power and environmental protection legislation in light of the Fifth Amendment just compensation provision and to recommend legislation that will reconcile the two principles.« less

Arizona Traffic Safety Education, K-8. Bicycle Safety, Grades K-1.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains nine lessons on sidewalk vehicles and bicycles for use in kindergarten and grade 1. Introductory information provided for the teacher includes basic highway safety concepts, stressing…

Arizona Traffic Safety Education, K-8. Bicycle Safety, Grade 2.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains ten lessons on bicycles for use in grade 2. Introductory information provided for the teacher includes basic highway safety concepts, stressing communication methods for highway users,…

Arizona Traffic Safety Education, K-8. Passenger Safety, Grades K-1.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains nine lessons for use in kindergarten and grade 1. Introductory information provided for the teacher includes basic highway safety concepts, stressing communication methods for highway…

Exploring Graphic Design. A Short Course in Desktop Publishing.

ERIC Educational Resources Information Center

Stanley, MLG

This course in desktop publishing contains seven illustrated modules designed to meet the following objectives: (1) use a desktop publishing program to explore advanced topics in graphic design; (2) learn about typography and how to make design decisions on the use of typestyles; (3) learn basic principles in graphic communications and apply them…

The Elementary Science Safety Manual. Revised.

ERIC Educational Resources Information Center

New Jersey State Dept. of Education, Trenton. Div. of General Academic Education.

Based on the principle that safety education should be a vital component in science instruction, this manual was designed to assist elementary teachers in doing more experiments and activities more confidently by making them aware of dangers and precautions. It also aims to make students aware that safety is a lifetime process and responsibility.…

Experiments To Demonstrate Chemical Process Safety Principles.

ERIC Educational Resources Information Center

Dorathy, Brian D.; Mooers, Jamisue A.; Warren, Matthew M.; Mich, Jennifer L.; Murhammer, David W.

2001-01-01

Points out the need to educate undergraduate chemical engineering students on chemical process safety and introduces the content of a chemical process safety course offered at the University of Iowa. Presents laboratory experiments demonstrating flammability limits, flash points, electrostatic, runaway reactions, explosions, and relief design.…

Radiopharmaceuticals in nuclear medicine practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kowalsky, R.J.; Perry, J.R.

1987-01-01

This book discusses the basic principles and clinical applications of radiopharmaceuticals. Topics include atomic physics as applied to radiopharmaceuticals, radionuclide generator function, nuclear pharmacy and safety, and radiopharmaceutical use in evaluating the major organ systems of the body. For each body system the author explains rationale for use, typical procedures, current agents of choice, and interpretation of results. Images, tables, and graphs illustrate normal and abnormal studies.

Arizona Traffic Safety Education, K-8. Bicycle Safety, Grade 3.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide for grade 3 contains seven lessons on bicycles and an appendix on conducting a bicycle rodeo. Introductory information provided for the teacher includes basic highway safety concepts, stressing…

Towards a Basis for Designing Backwater and Side Channel Restorations

USDA-ARS?s Scientific Manuscript database

Design criteria for river channel restoration is becoming highly developed with several handbooks and guidance documents available, despite notable differences among various schools of thought. Basic principles of stable channel design and riverine habitat simulation undergird channel reconstructio...

Breeding design considerations for coastal Douglas-fir.

Treesearch

Randy Johnson

1998-01-01

The basic principles of designing forest tree breeding programs are reviewed for Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) in the Pacific Northwest. Breeding populations are discussed given current and future breeding zone sizes and seed orchard designs. Seed orchard composition is discussed for potential genetic gain and maintaining...

Personality Plus. (Your Guide to Better Health and Personal Development).

ERIC Educational Resources Information Center

de la Concha, Hector

This manual is designed to acquaint individuals with basic principles of personal health, grooming, and personality development. Addressed in the individual chapters of the guide are the following topics: self-evaluation and completion of a personal inventory; proper diet and principles of maintaining a sound body; relaxation techniques; key words…

HATS: A Design Procedure for Routine Business Documents.

ERIC Educational Resources Information Center

Baker, William H.

2001-01-01

Describes an approach to teaching students a basic design process for routine business documents like memos, letters, and reports. Outlines the design principles of HATS (Headings, Access, Typography, and Spacing), how they apply in before-and-after fashion to various documents, and discusses an assignment in which students redesign an existing…

On the search for design principles in biological systems.

PubMed

Poyatos, Juan F

2012-01-01

The search for basic concepts and underlying principles was at the core of the systems approach to science and technology. This approach was somehow abandoned in mainstream biology after its initial proposal, due to the rise and success of molecular biology. This situation has changed. The accumulated knowledge of decades of molecular studies in combination with new technological advances, while further highlighting the intricacies of natural systems, is also bringing back the quest-for-principles research program. Here, I present two lessons that I derived from my own quest: the importance of studying biological information processing to identify common principles in seemingly unrelated contexts and the adequacy of using known design principles at one level of biological organization as a valuable tool to help recognizing principles at an alternative one. These and additional lessons should contribute to the ultimate goal of establishing principles able to integrate the many scales of biological complexity.

Universal Design in Postsecondary Education: Process, Principles, and Applications

ERIC Educational Resources Information Center

Burgstahler, Sheryl

2009-01-01

Designing any product or environment involves the consideration of many factors, including aesthetics, engineering options, environmental issues, safety concerns, industry standards, and cost. Typically, designers focus their attention on the average user. In contrast, universal design (UD), according to the Center for Universal Design, "is…

eduSPIM: Light Sheet Microscopy in the Museum

PubMed Central

Schmid, Benjamin; Weber, Michael; Huisken, Jan

2016-01-01

Light Sheet Microscopy in the Museum Light sheet microscopy (or selective plane illumination microscopy) is an important imaging technique in the life sciences. At the same time, this technique is also ideally suited for community outreach projects, because it produces visually appealing, highly dynamic images of living organisms and its working principle can be understood with basic optics knowledge. Still, the underlying concepts are widely unknown to the non-scientific public. On the occasion of the UNESCO International Year of Light, a technical museum in Dresden, Germany, launched a special, interactive exhibition. We built a fully functional, educational selective plane illumination microscope (eduSPIM) to demonstrate how developments in microscopy promote discoveries in biology. Design Principles of an Educational Light Sheet Microscope To maximize educational impact, we radically reduced a standard light sheet microscope to its essential components without compromising functionality and incorporated stringent safety concepts beyond those needed in the lab. Our eduSPIM system features one illumination and one detection path and a sealed sample chamber. We image fixed zebrafish embryos with fluorescent vasculature, because the structure is meaningful to laymen and visualises the optical principles of light sheet microscopy. Via a simplified interface, visitors acquire fluorescence and transmission data simultaneously. The eduSPIM Design Is Tailored Easily to Fit Numerous Applications The universal concepts presented here may also apply to other scientific approaches that are communicated to laymen in interactive settings. The specific eduSPIM design is adapted easily for various outreach and teaching activities. eduSPIM may even prove useful for labs needing a simple SPIM. A detailed parts list and schematics to rebuild eduSPIM are provided. PMID:27560188

A framework for the development of patient safety education and training guidelines.

PubMed

Zikos, Dimitrios; Diomidous, Marianna; Mantas, John

2010-01-01

Patient Safety (PS) is a major concern that involves a wide range of roles in healthcare, including those who are directly and indirectly involved, and patients as well. In order to succeed into developing a safety culture among healthcare providers, carers and patients, there should be given great attention into building appropriate education and training tools, especially addressing those who plan patient safety activities. The framework described in this policy paper is based on the results of the European Network for Patient Safety (EUNetPaS) project and analyses the principles and elements of the guidance that should be provided to those who design and implement Patient Safety Education and training activities. The main principles that it should be based on and the core teaching objectives-expected outcomes are addressed. Once the main context and considerations are properly set, the guidance should define the general schema of the content that should be included in the Education and Training activities, as well as how these activities would be delivered. It is also important that the different roles of the recipients are clearly distinguished and linked to their role-specific methods, proper delivery platforms and success stories. Setting these principles into practice when planning and implementing interventions, primarily aims to enlighten and support those who are enrolled to design and implement Patient Safety education and training teaching activities. This is achieved by providing them with a framework to build upon, succeeding to build a collaborative, safety conscious and competent environment, in terms of PS. A guidelines web platform has been developed to support this process.

AN APPRAISAL OF INSTRUCTIONAL UNITS TO ENHANCE STUDENT UNDERSTANDING OF PROFIT-MAXIMIZING PRINCIPLES. APPENDIX TO FINAL REPORT.

ERIC Educational Resources Information Center

BARKER, RICHARD L.

TWENTY-TWO OHIO HIGH SCHOOLS OFFERING VOCATIONAL AGRICULTURE TO 262 JUNIOR AND SENIOR STUDENTS PARTICIPATED IN A STUDY TO MEASURE THE RELATIVE EFFECTIVENESS OF FARM MANAGEMENT INSTRUCTIONAL UNITS DESIGNED TO ENHANCE STUDENT UNDERSTANDING OF BASIC PROFIT-MAXIMIZING PRINCIPLES WHEN USED IN TEACHING VOCATIONAL AGRICULTURE STUDENTS IN THE SCHOOL…

Water System Adaptation to Hydrological Changes: Module 10, Basic Principles of Incorporating Adaptation Science into Hydrologic Planning and Design

EPA Science Inventory

This course will introduce students to the fundamental principles of water system adaptation to hydrological changes, with emphasis on data analysis and interpretation, technical planning, and computational modeling. Starting with real-world scenarios and adaptation needs, the co...

Spreadsheet Design: An Optimal Checklist for Accountants

ERIC Educational Resources Information Center

Barnes, Jeffrey N.; Tufte, David; Christensen, David

2009-01-01

Just as good grammar, punctuation, style, and content organization are important to well-written documents, basic fundamentals of spreadsheet design are essential to clear communication. In fact, the very principles of good writing should be integrated into spreadsheet workpaper design and organization. The unique contributions of this paper are…

Interior Design Factors in Library Facilities.

ERIC Educational Resources Information Center

Jackson, Patricia Ann

When planning the interior of a library facility, the planning team of librarian, library consultant, architect, and interior design consultant must focus attention on the basic principles of interior design and the psychological needs of the user. Colors for an interior should be selected with careful regard to space, light, and emotional and…

Cyber-Security Curricula for Basic Users

DTIC Science & Technology

2013-09-01

like cyberbullying , digital cheating, and safety and security concerns‖ [7]. The need to teach security principles to this age demographic is at an...addresses the following topics: Cyberbullying , Inappropriate content, 25 Predators, Revealing too much Information, Spyware, spam, and scams. Each...emerging technology, surfing the web, video gaming, the dark side – cyberbullying . Each topic is covered by providing facts for the teacher to present

The Multiple-Mirror Telescope

ERIC Educational Resources Information Center

Carleton, Nathaniel P.; Hoffmann, William F.

1978-01-01

Describes the basic design and principle of operating an optical-infrared telescope, the MMT. This third largest telescope in the world represents a new stage in telescope design; it uses a cluster of six reflecting telescopes, and relies on an automatic sensing and control system. (GA)

Fire Safety: Any Time, Any Place. First Grade. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the first grade component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of first grade students, its objectives include acquiring basic knowledge of fire and burn hazards, developing a basic understanding of simple injury reduction, and encouraging parent involvement.…

Adaptation of Combustion Principles to Aircraft Propulsion. Volume I; Basic Considerations in the Combustion of Hydrocarbon Fuels with Air

NASA Technical Reports Server (NTRS)

Barnett, Henry C (Editor); Hibbard, Robert R (Editor)

1955-01-01

The report summarizes source material on combustion for flight-propulsion engineers. First, several chapters review fundamental processes such as fuel-air mixture preparation, gas flow and mixing, flammability and ignition, flame propagation in both homogenous and heterogenous media, flame stabilization, combustion oscillations, and smoke and carbon formation. The practical significance and the relation of these processes to theory are presented. A second series of chapters describes the observed performance and design problems of engine combustors of the principal types. An attempt is made to interpret performance in terms of the fundamental processes and theories previously reviewed. Third, the design of high-speed combustion systems is discussed. Combustor design principles that can be established from basic considerations and from experience with actual combustors are described. Finally, future requirements for aircraft engine combustion systems are examined.

A Historical Analysis of Crane Mishaps at Kennedy Space Center

NASA Technical Reports Server (NTRS)

Wolfe, Crystal

2014-01-01

Cranes and hoists are widely used in many areas. Crane accidents and handling mishaps are responsible for injuries, costly equipment damage, and program delays. Most crane accidents are caused by preventable factors. Understanding these factors is critical when designing cranes and preparing lift plans. Analysis of previous accidents provides insight into current recommendations for crane safety. Cranes and hoists are used throughout Kennedy Space Center to lift everything from machine components to critical flight hardware. Unless they are trained crane operators, most NASA employees and contractors do not need to undergo specialized crane training and may not understand the safety issues surrounding the use of cranes and hoists. A single accident with a crane or hoist can injure or kill people, cause severe equipment damage, and delay or terminate a program. Handling mishaps can also have a significant impact on the program. Simple mistakes like bouncing or jarring a load, or moving the crane down when it should go up, can damage fragile flight hardware and cause major delays in processing. Hazardous commodities (high pressure gas, hypergolic propellants, and solid rocket motors) can cause life safety concerns for the workers performing the lifting operations. Most crane accidents are preventable with the correct training and understanding of potential hazards. Designing the crane with human factors taken into account can prevent many accidents. Engineers are also responsible for preparing lift plans where understanding the safety issues can prevent or mitigate potential accidents. Cranes are widely used across many areas of KSC. Failure of these cranes often leads to injury, high damage costs, and significant delays in program objectives. Following a basic set of principles and procedures during design, fabrication, testing, regular use, and maintenance can significantly minimize many of these failures. As the accident analysis shows, load drops are often caused or influenced by human factors. Therefore, proper training and understanding of crane safety throughout the workforce is critical. It is important that the engineers designing the cranes, lift planners preparing the lift plans, operators performing the lifts, and training officers conducting the operator training all understand the problems that can happen with cranes and how to ensure the safety of the workforce and equipment being lifted.

Basic principles for rational design of high-performance nanostructured silicon-based thermoelectric materials.

PubMed

Yang, Chun Cheng; Li, Sean

2011-12-23

Recently, nanostructured silicon-based thermoelectric materials have drawn great attention owing to their excellent thermoelectric performance in the temperature range around 450 °C, which is eminently applicable for concentrated solar thermal technology. In this work, a unified nanothermodynamic model is developed to investigate the predominant factors that determine the lattice thermal conductivity of nanocrystalline, nanoporous, and nanostructured bulk Si. A systematic study shows that the thermoelectric performance of these materials can be substantially enhanced by the following three basic principles: 1) artificial manipulation and optimization of roughness with surface/interface patterning/engineering; 2) grain-size reduction with innovative fabrication techniques in a controllable fashion; and 3) optimization of material parameters, such as bulk solid-vapor transition entropy, bulk vibrational entropy, dimensionality, and porosity, to decrease the lattice thermal conductivity. These principles may be used to rationally design novel nanostructured Si-based thermoelectric materials for renewable energy applications. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Mass Uncertainty and Application For Space Systems

NASA Technical Reports Server (NTRS)

Beech, Geoffrey

2013-01-01

Expected development maturity under contract (spec) should correlate with Project/Program Approved MGA Depletion Schedule in Mass Properties Control Plan. If specification NTE, MGA is inclusive of Actual MGA (A5 & A6). If specification is not an NTE Actual MGA (e.g. nominal), then MGA values are reduced by A5 values and A5 is representative of remaining uncertainty. Basic Mass = Engineering Estimate based on design and construction principles with NO embedded margin MGA Mass = Basic Mass * assessed % from approved MGA schedule. Predicted Mass = Basic + MGA. Aggregate MGA % = (Aggregate Predicted - Aggregate Basic) /Aggregate Basic.

Rational, computer-enabled peptide drug design: principles, methods, applications and future directions.

PubMed

Diller, David J; Swanson, Jon; Bayden, Alexander S; Jarosinski, Mark; Audie, Joseph

2015-01-01

Peptides provide promising templates for developing drugs to occupy a middle space between small molecules and antibodies and for targeting 'undruggable' intracellular protein-protein interactions. Importantly, rational or in cerebro design, especially when coupled with validated in silico tools, can be used to efficiently explore chemical space and identify islands of 'drug-like' peptides to satisfy diverse drug discovery program objectives. Here, we consider the underlying principles of and recent advances in rational, computer-enabled peptide drug design. In particular, we consider the impact of basic physicochemical properties, potency and ADME/Tox opportunities and challenges, and recently developed computational tools for enabling rational peptide drug design. Key principles and practices are spotlighted by recent case studies. We close with a hypothetical future case study.

Using a Self-Administered Visual Basic Software Tool To Teach Psychological Concepts.

ERIC Educational Resources Information Center

Strang, Harold R.; Sullivan, Amie K.; Schoeny, Zahrl G.

2002-01-01

Introduces LearningLinks, a Visual Basic software tool that allows teachers to create individualized learning modules that use constructivist and behavioral learning principles. Describes field testing of undergraduates at the University of Virginia that tested a module designed to improve understanding of the psychological concepts of…

Basic Principles--Outdoor Living Skills Series. Instructor Manual.

ERIC Educational Resources Information Center

Deaton, Don

The priorities for sustaining life--air, shelter, water, and food--are the subjects of this module designed to give junior and senior high school students the foundation for safe, rewarding experiences in the outdoors. Five 50-minute lesson plans cover the basic need in order of priority: air (3 minutes to survive without it), shelter (3 hours, in…

Accepting Evolution or Discarding Science

ERIC Educational Resources Information Center

Sharpes, Donald K.; Peramas, Mary M.

2006-01-01

Challenging basic principles of constitutional law, advocates of intelligent design are undermining educators' ability to teach evolution in their science classrooms. Because US Supreme Court rulings now prohibit creationist accounts of the origin of life in schools, arguments favoring divine intervention, known as intelligent design, have emerged…

[Principle directions for the creation and organization of the system of sanitary-epidemiological safety during the preparations for the XXII Olympic Winter Games and XI Paralympic Winter Games 2014 in Sochi].

PubMed

Onishchenko, G G; Bragina, I V; Ezhlova, E B; Demina, V P; Gorskiĭ, A A; Gus'kov, A S; Aksenova, O I; Ivanov, G E; Klindukhov, V P; Nikolaevich, P N; Grechanaia, T B; Kulichenko, A N; Maletskaia, O V; Manin, E A; Parkhomenko, V V; Kulichenko, O A

2015-01-01

The paper generalizes the experience of formation of protection system against biological threats and ensuring sanitary and epidemiological welfare during preparation for the XXII Olympic Winter Games and XI Paralympic Winter Games of 2014 in Sochi. The basic steps for creating this system, since 2007, participation and role of Rospotrebnadzor in this process are shown. The paper deals with such questions as the governmental and administrative structures with federal agencies interaction, development of a regulatory framework governing the safety system of the Olympic Games, development of algorithms of information exchange and management decisions, biological safety in developing infrastructure in Sochi.

Quality improvement in neonatal digital radiography: implementing the basic quality improvement tools.

PubMed

Eslamy, Hedieh K; Newman, Beverley; Weinberger, Ed

2014-12-01

A quality improvement (QI) program may be implemented using the plan-do-study-act cycle (as a model for making improvements) and the basic QI tools (used to visually display and analyze variation in data). Managing radiation dose has come to the forefront as a safety goal for radiology departments. This is especially true in the pediatric population, which is more radiosensitive than the adult population. In this article, we use neonatal digital radiography to discuss developing a QI program with the principle goals of decreasing the radiation dose, decreasing variation in radiation dose, and optimizing image quality. Copyright © 2014 Elsevier Inc. All rights reserved.

Safety assessment for EPS electron-proton spectrometer

NASA Technical Reports Server (NTRS)

Gleeson, P.

1971-01-01

A safety analysis was conducted to identify the efforts required to assure relatively hazard free operation of the EPS and to meet the safety requirements of the program. Safety engineering criteria, principles, and techniques in applicable disciplines are stressed in the performance of the system and subsystem studies; in test planning; in the design, development, test, evaluation, and checkout of the equipment; and the operating procedures for the EPS program.

Get the Most out of Your AV System Dollar. Part II

ERIC Educational Resources Information Center

Wadsworth, Raymond H.

1974-01-01

Describes how to save money when designing AV facilities; excellent viewing from all seats is achieved by applying certain basic principles to the design of the room and the selection of the equipment. (Author/MLF)

Elementary Accounting. A Programed Text. Revised. Edition Code-3.

ERIC Educational Resources Information Center

Army Finance School, Fort Benjamin Harrison, IN.

This programed text is designed to teach the basic elements of the double entry system of accounting, including basic terms, procedures, definitions, and principles used. The text consists of frames, which are sequenced instructional steps and, in most cases, are composed of two parts. The first part states a fact or relates information and asks a…

A Study on the Rural Residence in the Northern Area of Zhejiang Province from the Perspective of Green Living Environment

NASA Astrophysics Data System (ADS)

Wang, J.; Gao, W. J.; Wang, C.

2018-05-01

At present, owing to the rapid development of rural construction, it lacks corresponding theories and practices and damages to the features of rural area, ignoring the geography, suitability and green living environment factors. The research selects rural residence as the object, defining “courtyard” as the basic unit for rural residence. It utilizes the principle of topology as the expanding media, by the method of principle of cellular structure and green living environment design strategy. The essay establishes the design and construction system of “rural basic unit”, combining functions and structures, prototype menu, chamber space and compound interface, from the perspective of green living environment. It aims to guide rural construction and protect the ruralliving environment.

[Application of Raman Spectroscopy Technique to Agricultural Products Quality and Safety Determination].

PubMed

Liu, Yan-de; Jin, Tan-tan

2015-09-01

The quality and safety of agricultural products and people health are inseparable. Using the conventional chemical methods which have so many defects, such as sample pretreatment, complicated operation process and destroying the samples. Raman spectroscopy as a powerful tool of analysing and testing molecular structure, can implement samples quickly without damage, qualitative and quantitative detection analysis. With the continuous improvement and the scope of the application of Raman spectroscopy technology gradually widen, Raman spectroscopy technique plays an important role in agricultural products quality and safety determination, and has wide application prospects. There have been a lot of related research reports based on Raman spectroscopy detection on agricultural product quality safety at present. For the understanding of the principle of detection and the current development situation of Raman spectroscopy, as well as tracking the latest research progress both at home and abroad, the basic principles and the development of Raman spectroscopy as well as the detection device were introduced briefly. The latest research progress of quality and safety determination in fruits and vegetables, livestock and grain by Raman spectroscopy technique were reviewed deeply. Its technical problems for agricultural products quality and safety determination were pointed out. In addition, the text also briefly introduces some information of Raman spectrometer and the application for patent of the portable Raman spectrometer, prospects the future research and application.

Normal accidents: human error and medical equipment design.

PubMed

Dain, Steven

2002-01-01

High-risk systems, which are typical of our technologically complex era, include not just nuclear power plants but also hospitals, anesthesia systems, and the practice of medicine and perfusion. In high-risk systems, no matter how effective safety devices are, some types of accidents are inevitable because the system's complexity leads to multiple and unexpected interactions. It is important for healthcare providers to apply a risk assessment and management process to decisions involving new equipment and procedures or staffing matters in order to minimize the residual risks of latent errors, which are amenable to correction because of the large window of opportunity for their detection. This article provides an introduction to basic risk management and error theory principles and examines ways in which they can be applied to reduce and mitigate the inevitable human errors that accompany high-risk systems. The article also discusses "human factor engineering" (HFE), the process which is used to design equipment/ human interfaces in order to mitigate design errors. The HFE process involves interaction between designers and endusers to produce a series of continuous refinements that are incorporated into the final product. The article also examines common design problems encountered in the operating room that may predispose operators to commit errors resulting in harm to the patient. While recognizing that errors and accidents are unavoidable, organizations that function within a high-risk system must adopt a "safety culture" that anticipates problems and acts aggressively through an anonymous, "blameless" reporting mechanism to resolve them. We must continuously examine and improve the design of equipment and procedures, personnel, supplies and materials, and the environment in which we work to reduce error and minimize its effects. Healthcare providers must take a leading role in the day-to-day management of the "Perioperative System" and be a role model in promoting a culture of safety in their organizations.

The Effect of Self-Explanation and Prediction on the Development of Principled Understanding of Chess in Novices

ERIC Educational Resources Information Center

de Bruin, Anique B. H.; Rikers, Remy M. J. P.; Schmidt, Henk G.

2007-01-01

The present study was designed to test the effect of self-explanation and prediction on the development of principled understanding of novices learning to play chess. First-year psychology students, who had no chess experience, first learned the basic rules of chess and were afterwards divided in three conditions. They either observed (control…

QUESTION--WHAT MAKES A SCHOOL SITE SAFE. ANSWER--DEFINITE PLANNING.

ERIC Educational Resources Information Center

GEORGE, N.L.; GILLILAND, LONNIE, SR.

TWO STAFF MEMBERS FROM A SYSTEM OF PUBLIC SCHOOLS, THE ASSISTANT SUPERINTENDENT, AND THE DIRECTOR OF SAFETY EDUCATION DISCUSSED THE PROBLEMS OF TRAFFIC SAFETY ON AND AROUND THE SCHOOL SITE. FACTORS WHICH WERE CONSIDERED INCLUDE--(1) SCHOOL SITE AND BUILDING LOCATION, (2) SAFETY REQUIREMENTS, PRACTICES AND PRINCIPLES, (3) SIDEWALK DESIGN AND…

Conceptual studies for a mercury target circuit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sigg, B.

1996-06-01

For the now favored target design of the European Spallation Source project, i.e. the version using mercury as target material, a basic concept of the primary system has been worked out. It does not include a detailed design of the various components of the target circuit, but tries to outline a feasible solution for the system. Besides the removal of the thermal power of about 3MW produced in the target by the proton beam, the primary system has to satisfy a number of other requirements related to processing, safety, and operation. The basic proposal uses an electromagnetic pump and amore » mercury-water intermediate heat excanger, but other alternatives are also being discussed. Basic safety requirements, i.e. protection against radiation and toxic mercury vapours, are satisfied by a design using an air-tight primary system containment, double-walled tubes in the intermediate heat exchanger, a fail-safe system for decay heat removal, and a remote handling facility for the active part of the system. Much engineering work has still to be done, because many details of the design of the mercury and gas processing systems remain to be clarified, the thermal-hydraulic components need further optimisation, the system for control and instrumentation is only known in outline and a through safety analysis will be required.« less

School Design.

ERIC Educational Resources Information Center

Erwin, Clyde A.

This guide to basic principles of school design presents diagrammatic explanation of various developed standards and planning suggestions. The first section schematically develops patterns of school activity for primary, elementary, and high schools. The second discusses organization of activities--(1) contour adjustment, (2) landscaping, (3)…

Design and Construction of Simple, Nitrogen-Laser-Pumped, Tunable Dye Lasers

ERIC Educational Resources Information Center

Hilborn, Robert C.

1978-01-01

The basic physical principles of dye lasers are discussed and used to analyze the design and operation of tunable dye lasers pumped by pulsed nitrogen lasers. Details of the design and construction of these dye lasers are presented. Some simple demonstration experiments are described. (BB)

Basic ESL Literacy from a Freirian Perspective: A Curriculum Unit for Farmworker Education.

ERIC Educational Resources Information Center

Faigin, Sybil Barbara

This paper discusses the development and testing of a literacy unit in basic English as a second language (ESL) for Canadian farmworkers based on the Freirian principles of designing adult education curriculum. The Freirian approach looks at adult learners in the context of their daily reality and uses literacy as a vehicle for the students'…

When paradigms collide at the road rail interface: evaluation of a sociotechnical systems theory design toolkit for cognitive work analysis.

PubMed

Read, Gemma J M; Salmon, Paul M; Lenné, Michael G

2016-09-01

The Cognitive Work Analysis Design Toolkit (CWA-DT) is a recently developed approach that provides guidance and tools to assist in applying the outputs of CWA to design processes to incorporate the values and principles of sociotechnical systems theory. In this paper, the CWA-DT is evaluated based on an application to improve safety at rail level crossings. The evaluation considered the extent to which the CWA-DT met pre-defined methodological criteria and aligned with sociotechnical values and principles. Both process and outcome measures were taken based on the ratings of workshop participants and human factors experts. Overall, workshop participants were positive about the process and indicated that it met the methodological criteria and sociotechnical values. However, expert ratings suggested that the CWA-DT achieved only limited success in producing RLX designs that fully aligned with the sociotechnical approach. Discussion about the appropriateness of the sociotechnical approach in a public safety context is provided. Practitioner Summary: Human factors and ergonomics practitioners need evidence of the effectiveness of methods. A design toolkit for cognitive work analysis, incorporating values and principles from sociotechnical systems theory, was applied to create innovative designs for rail level crossings. Evaluation results based on the application are provided and discussed.

FAST FLUX TEST FACILITY CONCEPTUAL FACILTY DESIGN DESCRIPTION FOR THE INERT GAS CELL EXAMINATION FACILITY NO. 71

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1968-12-12

The purpose of this Conceptual Facility Design Description (CFDD) is to provide a technical description of the Inert Gas Cell Examination Facility such that agreement with RDT on a Conceptual Design can be reached . The CFDD also serves to establish a common understanding of the facility concept among all responsible FFTF Project parties including the Architect Engineer and Reactor Designer. Included are functions and design requirements, a physical description of the facility, safety considerations, principles of operation, and maintenance principles.

[Current status and prospect of translational medicine in nanotechnology].

PubMed

Gao, Guang-yu; Chen, Mei-ling; Li, Ming-yuan; Yang, Zhen-bo; Li, Zhi-ping; Mei, Xing-guo

2015-08-01

Nowadays, nanotechnologies have shown wide application foreground in the biomedical field of medicine laboratory tests, drug delivery, gene therapy and bioremediation. However, in recent years, nanomaterials have been labeled poisonous, because of the disputes and misunderstandings of mainstream views on their safety. Besides, for the barriers of technical issues in preparation like: (1) low efficacy (poor PK & PD and low drug loading), (2) high cost (irreproducibility and difficulty in scale up), little of that research has been successfully translated into commercial products. Currently, along with the new theory of "physical damage is the origin of nanotoxicity", biodegradability and biocompatibility of nanomaterials are listed as the basic principle of safe application of nanomaterials. Combining scientific design based on molecular level with precision control of process engineering will provide a new strategy to overcome the core technical challenges. New turning point of translational medicine in nanotechnology may emerge.

Principles and Benefits of Explicitly Designed Medical Device Safety Architecture.

PubMed

Larson, Brian R; Jones, Paul; Zhang, Yi; Hatcliff, John

The complexity of medical devices and the processes by which they are developed pose considerable challenges to producing safe designs and regulatory submissions that are amenable to effective reviews. Designing an appropriate and clearly documented architecture can be an important step in addressing this complexity. Best practices in medical device design embrace the notion of a safety architecture organized around distinct operation and safety requirements. By explicitly separating many safety-related monitoring and mitigation functions from operational functionality, the aspects of a device most critical to safety can be localized into a smaller and simpler safety subsystem, thereby enabling easier verification and more effective reviews of claims that causes of hazardous situations are detected and handled properly. This article defines medical device safety architecture, describes its purpose and philosophy, and provides an example. Although many of the presented concepts may be familiar to those with experience in realization of safety-critical systems, this article aims to distill the essence of the approach and provide practical guidance that can potentially improve the quality of device designs and regulatory submissions.

Universal Design for Learning and School Libraries: A Logical Partnership

ERIC Educational Resources Information Center

Robinson, David E.

2017-01-01

This article will explore the basic tenets of Universal Design for Learning (UDL) in relation to collaborative curriculum development and implementation; provide a case study examination of UDL principles in action; and suggest school library curricular activities that provide opportunities for multiple means of representation, action, and…

VCM Process Design: An ABET 2000 Fully Compliant Project

ERIC Educational Resources Information Center

Benyahia, Farid

2005-01-01

A long experience in undergraduate vinyl chloride monomer (VCM) process design projects is shared in this paper. The VCM process design is shown to be fully compliant with ABET 2000 criteria by virtue of its abundance in chemical engineering principles, integration of interpersonal and interdisciplinary skills in design, safety, economics, and…

Refraction effects of atmosphere on geodetic measurements to celestial bodies

NASA Technical Reports Server (NTRS)

Joshi, C. S.

1973-01-01

The problem is considered of obtaining accurate values of refraction corrections for geodetic measurements of celestial bodies. The basic principles of optics governing the phenomenon of refraction are defined, and differential equations are derived for the refraction corrections. The corrections fall into two main categories: (1) refraction effects due to change in the direction of propagation, and (2) refraction effects mainly due to change in the velocity of propagation. The various assumptions made by earlier investigators are reviewed along with the basic principles of improved models designed by investigators of the twentieth century. The accuracy problem for various quantities is discussed, and the conclusions and recommendations are summarized.

Wet--But Safe. A Classroom Course in Water Safety and Survival.

ERIC Educational Resources Information Center

Michigan State Dept. of Natural Resources, Lansing.

This manual is designed for use in elementary school systems that do not have a swimming pool available. It contains eight classroom sessions and provides a core of information in basic water safety, water survival, and water rescue. (JD)

Using articulation and inscription as catalysts for reflection: Design principles for reflective inquiry

NASA Astrophysics Data System (ADS)

Loh, Ben Tun-Bin

2003-07-01

The demand for students to engage in complex student-driven and information-rich inquiry investigations poses challenges to existing learning environments. Students are not familiar with this style of work, and lack the skills, tools, and expectations it demands, often forging blindly forward in the investigation. If students are to be successful, they need to learn to be reflective inquirers, periodically stepping back from an investigation to evaluate their work. The fundamental goal of my dissertation is to understand how to design learning environments to promote and support reflective inquiry. I have three basic research questions: how to define this mode of work, how to help students learn it, and understanding how it facilitates reflection when enacted in a classroom. I take an exploratory approach in which, through iterative cycles of design, development, and reflection, I develop principles of design for reflective inquiry, instantiate those principles in the design of a software environment, and test that software in the context of classroom work. My work contributes to the understanding of reflective inquiry in three ways: First, I define a task model that describes the kinds of operations (cognitive tasks) that students should engage in as reflective inquirers. These operations are defined in terms of two basic tasks: articulation and inscription, which serve as catalysts for externalizing student thinking as objects of and triggers for reflection. Second, I instantiate the task model in the design of software tools (the Progress Portfolio). And, through proof of concept pilot studies, I examine how the task model and tools helped students with their investigative classroom work. Finally, I take a step back from these implementations and articulate general design principles for reflective inquiry with the goal of informing the design of other reflective inquiry learning environments. There are three design principles: (1) Provide a designated work space for reflection activities to focus student attention on reflection. (2) Help students create and use artifacts that represent their work and their thinking as a means to create referents for reflection. (3) Support and take advantage of social processes that help students reflect on their own work.

Graphic Arts: Orientation, Composition, and Paste-Up. Third Edition.

ERIC Educational Resources Information Center

Crummett, Dan

This document contains teacher and student materials for a course in graphic arts. Ten units of instruction cover the following topics: (1) orientation; (2) shop safety; (3) shop organization; (4) printing processes; (5) paper; (6) typography; (7) typesetting; (8) design principles; (9) paste-up principles and procedures; and (10) proof procedures…

Risk Importance Measures in the Designand Operation of Nuclear Power Plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vrbanic I.; Samanta P.; Basic, I

This monograph presents and discusses risk importance measures as quantified by the probabilistic risk assessment (PRA) models of nuclear power plants (NPPs) developed according to the current standards and practices. Usually, PRA tools calculate risk importance measures related to a single ?basic event? representing particular failure mode. This is, then, reflected in many current PRA applications. The monograph focuses on the concept of ?component-level? importance measures that take into account different failure modes of the component including common-cause failures (CCFs). In opening sections the roleof risk assessment in safety analysis of an NPP is introduced and discussion given of ?traditional?,more » mainly deterministic, design principles which have been established to assign a level of importance to a particular system, structure or component. This is followed by an overview of main risk importance measures for risk increase and risk decrease from current PRAs. Basic relations which exist among the measures are shown. Some of the current practical applications of risk importancemeasures from the field of NPP design, operation and regulation are discussed. The core of the monograph provides a discussion on theoreticalbackground and practical aspects of main risk importance measures at the level of ?component? as modeled in a PRA, starting from the simplest case, single basic event, and going toward more complexcases with multiple basic events and involvements in CCF groups. The intent is to express the component-level importance measures via theimportance measures and probabilities of the underlying single basic events, which are the inputs readily available from a PRA model andits results. Formulas are derived and discussed for some typical cases. The formulas and their results are demonstrated through some practicalexamples, done by means of a simplified PRA model developed in and run by RiskSpectrum? tool, which are presented in the appendices. The monograph concludes with discussion of limitations of the use of risk importance measures and a summary of component-level importance cases evaluated.« less

Understanding MRI: basic MR physics for physicians.

PubMed

Currie, Stuart; Hoggard, Nigel; Craven, Ian J; Hadjivassiliou, Marios; Wilkinson, Iain D

2013-04-01

More frequently hospital clinicians are reviewing images from MR studies of their patients before seeking formal radiological opinion. This practice is driven by a multitude of factors, including an increased demand placed on hospital services, the wide availability of the picture archiving and communication system, time pressures for patient treatment (eg, in the management of acute stroke) and an inherent desire for the clinician to learn. Knowledge of the basic physical principles behind MRI is essential for correct image interpretation. This article, written for the general hospital physician, describes the basic physics of MRI taking into account the machinery, contrast weighting, spin- and gradient-echo techniques and pertinent safety issues. Examples provided are primarily referenced to neuroradiology reflecting the subspecialty for which MR currently has the greatest clinical application.

Air Age Education. Aviation Career Awareness Program.

ERIC Educational Resources Information Center

Petrie, Edwin T.

Described is a program designed to help introduce the broad scope of occupational careers available with general aviation. The program is designed to aid the teacher in presenting the basic principles of flight, essential facts about general aviation as well as its occupational opportunities. It replaces previous elementary student materials, and…

Clothing and Textile Student Modules.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

Forty-seven performance-based instructional modules on six major topics are provided for the home economics content area of clothing and textiles. The six topics are (1) planning basics (psychological, physical, social, and behavioral aspects of clothing; elements of design; principles of design; and style and fashion in clothing), (2) buyership…

Principles of Design And Operations Of Wastewater Treatment Pond Systems For Plant Operators, Engineers, And Managers

EPA Science Inventory

Wastewater pond systems provide reliable, low cost, and relatively low maintenance treatment for municipal and industrial discharges. However, they do have certain design, operations, and maintenance requirements. While the basic models have not changed in the 30-odd years sinc...

Floristry. Instructor Guide [and] Student Reference. Volume 28, Number 1 [and] Volume 28, Number 2.

ERIC Educational Resources Information Center

Rothenberger, Barbara; And Others

This instructor guide and the corresponding student reference contain 7 units that include 30 lessons for a course in floristry. The lessons topics are as follows: the floristry industry, plant identification, post-harvest handling, the mechanics of floral design, basic principles of floral design, construction of various types of designs, and…

Solving a product safety problem using a recycled high density polyethylene container

NASA Technical Reports Server (NTRS)

Liu, Ping; Waskom, T. L.

1993-01-01

The objectives are to introduce basic problem-solving techniques for product safety including problem identification, definition, solution criteria, test process and design, and data analysis. The students are given a recycled milk jug made of high density polyethylene (HDPE) by blow molding. The objectives are to design and perform proper material test(s) so they can evaluate the product safety if the milk jug is used in a certain way which is specified in the description of the procedure for this investigation.

Teaching and assessment of mathematical principles for software correctness using a reasoning concept inventory

NASA Astrophysics Data System (ADS)

Drachova-Strang, Svetlana V.

As computing becomes ubiquitous, software correctness has a fundamental role in ensuring the safety and security of the systems we build. To design and develop software correctly according to their formal contracts, CS students, the future software practitioners, need to learn a critical set of skills that are necessary and sufficient for reasoning about software correctness. This dissertation presents a systematic approach to both introducing these reasoning skills into the curriculum, and assessing how well the students have learned them. Specifically, it introduces a comprehensive Reasoning Concept Inventory (RCI) that captures the fine details of basic reasoning skills that are ideally learned across the undergraduate curriculum to reason about software correctness, to develop high quality software, and to understand why software works as specified. The RCI forms the basis for developing learning outcomes that help educators to assess the adequacy of current techniques and pinpoint necessary improvements. This dissertation contains results from experimentation and assessment over the past few years in multiple CS courses. The results show that the finer principles of mathematical reasoning of software correctness can be taught effectively and continuously improved with the help of the RCI using suitable teaching practices, and supporting methods and tools.

[Design of a Hazard Analysis and Critical Control Points (HACCP) plan to assure the safety of a bologna product produced by a meat processing plant].

PubMed

Bou Rached, Lizet; Ascanio, Norelis; Hernández, Pilar

2004-03-01

The Hazard Analysis and Critical Control Point (HACCP) is a systematic integral program used to identify and estimate the hazards (microbiological, chemical and physical) and the risks generated during the primary production, processing, storage, distribution, expense and consumption of foods. To establish a program of HACCP has advantages, being some of them: to emphasize more in the prevention than in the detection, to diminish the costs, to minimize the risk of manufacturing faulty products, to allow bigger trust to the management, to strengthen the national and international competitiveness, among others. The present work is a proposal based on the design of an HACCP program to guarantee the safety of the Bologna Special Type elaborated by a meat products industry, through the determination of hazards (microbiological, chemical or physical), the identification of critical control points (CCP), the establishment of critical limits, plan corrective actions and the establishment of documentation and verification procedures. The used methodology was based in the application of the seven basic principles settled down by the Codex Alimentarius, obtaining the design of this program. In view of the fact that recently the meat products are linked with pathogens like E. coli O157:H7 and Listeria monocytogenes, these were contemplated as microbiological hazard for the establishment of the HACCP plan whose application will guarantee the obtaining of a safe product.

Air Quality and Pollution. Environmental Studies. 4 Color Transparencies, Reproducibles & Teaching Guide. Grade 3, 4, 5.

ERIC Educational Resources Information Center

Ortleb, Edward P.; And Others

The world is faced with a variety of environmental problems. No country has escaped pollution and resource depletion. Basic ecological principles are often ignored and sometimes this contributes to ecological disasters. This volume is designed to provide basic information about the quality of the earth's atmosphere. The visual aids, worksheets,…

Water Quality and Pollution. Environmental Studies. 4 Color Transparencies, Reproducibles & Teaching Guide. Grade 3, 4, 5.

ERIC Educational Resources Information Center

Ortleb, Edward P.; And Others

The world is faced with a variety of environmental problems. No country has escaped pollution and resource depletion. Basic ecological principles are often ignored and sometimes this contributes to ecological disasters. This volume is designed to provide basic information about the quality of the earth's water resources. The visual aids,…

Energy and the Environment. Environmental Studies. 4 Color Transparencies, Reproducibles & Teaching Guide. Grade 3, 4, 5.

ERIC Educational Resources Information Center

Ortleb, Edward P.; And Others

The world is faced with a variety of environmental problems. No country has escaped pollution and resource depletion. Basic ecological principles are often ignored and sometimes this contributes to ecological disasters. This volume is designed to provide basic information about the quality of the earth's energy resources. The visual aids,…

Land Resources and Pollution. Environmental Studies. 4 Color Transparencies, Reproducibles & Teaching Guide. Grade 3, 4, 5.

ERIC Educational Resources Information Center

Ortleb, Edward P.; And Others

The world is faced with a variety of environmental problems. No country has escaped pollution and resource depletion. Basic ecological principles are often ignored and sometimes this contributes to ecological disasters. This volume is designed to provide basic information about the quality of the earth's land resources. The visual aids,…

Principles of Safety in Physical Education and Sport.

ERIC Educational Resources Information Center

Dougherty, Neil J., IV, Ed.

This book was designed to provide the professional with a straightforward and complete resource for those factors that must be considered in the provision of safe units of instruction in the commonly taught sports and activities. Twenty-one chapters provide essential information, checklists, and outlines, as well as ways to ensure student safety.…

Aviation safety : information on FAA's data on operational errors at air traffic control towers

DOT National Transportation Integrated Search

2003-09-23

A fundamental principle of aviation safety is the need to maintain adequate separation between aircraft and to ensure that aircraft maintain a safe distance from terrain, obstructions, and airspace that is not designated for routine air travel. Air t...

Radial Flux Distribution of Low-Energy Neutrons.

ERIC Educational Resources Information Center

Higinbotham, J.

1979-01-01

Describes an experiment designed to illustrate the basic principle involved in the process of moderation of fast neutrons by water, and the monitoring of the low-energy neutron flux using indium as a probe. (GA)

Universal Playground Design.

ERIC Educational Resources Information Center

Ensign, Arselia, Ed.

1993-01-01

This publication presents principles of universal playgrounds, designed to maximize accessibility for all children, with and without disabilities. First, the rationale for the universal playground is given including the importance of play and the value of integration. Next current guidelines for playground design are discussed including safety,…

Safety and Security by Design.

ERIC Educational Resources Information Center

Carter, Sherry P.

2003-01-01

Describes a pilot exercise in teaching middle and high school students how to conduct an assessment of the physical conditions and policies of their schools. Students were taught to use Crime Prevention through Environmental Design principles and to apply them in their own schools. (SLD)

[Case-non case studies: Principles, methods, bias and interpretation].

PubMed

Faillie, Jean-Luc

2017-10-31

Case-non case studies belongs to the methods assessing drug safety by analyzing the disproportionality of notifications of adverse drug reactions in pharmacovigilance databases. Used for the first time in the 1980s, the last few decades have seen a significant increase in the use of this design. The principle of the case-non case study is to compare drug exposure in cases of a studied adverse reaction with that of cases of other reported adverse reactions and called "non cases". Results are presented in the form of a reporting odds ratio (ROR), the interpretation of which makes it possible to identify drug safety signals. This article describes the principle of the case-non case study, the method of calculating the ROR and its confidence interval, the different modalities of analysis and how to interpret its results with regard to the advantages and limitations of this design. Copyright © 2017 Société française de pharmacologie et de thérapeutique. Published by Elsevier Masson SAS. All rights reserved.

Authentic Performance in the Instrumental Analysis Laboratory: Building a Visible Spectrophotometer Prototype

ERIC Educational Resources Information Center

Wilson, Mark V.; Wilson, Erin

2017-01-01

In this work we describe an authentic performance project for Instrumental Analysis in which students designed, built, and tested spectrophotometers made from simple components. The project addressed basic course content such as instrument design principles, UV-vis spectroscopy, and spectroscopic instrument components as well as skills such as…

Improving patient safety by instructional systems design

PubMed Central

Battles, J B

2006-01-01

Education and training are important elements in patient safety, both as a potential contributing factor to risks and hazards of healthcare associated injury or harm and as an intervention to be used in eliminating or preventing such harm. All too often we have relied on training as the only interventions for patient safety without examining other alternatives or realizing that, in some cases, the training systems themselves are part of the problem. One way to ensure safety by design is to apply established design principles to education and training. Instructional systems design (ISD) is a systematic method of development of education and training programs for improved learner performance. The ISD process involves five integrated steps: analysis, development, design, implementation, and evaluation (ADDIE). The application of ISD using the ADDIE approach can eliminate or prevent education and training from being a contributing factor of health associated injury or harm, and can also be effective in preventing injury or harm. PMID:17142604

Rail Safety/Equipment Crashworthiness : Volume 2. Design Guide.

DOT National Transportation Integrated Search

1978-07-01

The second of four volumes, has been prepared to assist design engineers in understanding the basic problems associated with the development of crashworthy interiors of locomotives, cabooses and passenger railcars. Rail vehicle accident conditions ar...

BOOK REVIEW: WETLAND DESIGN, PRINCIPLES AND PRACTICES FOR LANDSCAPE ARCHITECTS AND LAND-USE PLANNERS

EPA Science Inventory

The book is organized in such a way that it provides a stepwise guide that begins with a basic historical and aesthetic overview of wetland design. The book then summarizes the key concepts involved in cumultive impacts from a landscape ecology persepetive, and then delves furth...

A Simple Inquiry-Based Lab for Teaching Osmosis

ERIC Educational Resources Information Center

Taylor, John R.

2014-01-01

This simple inquiry-based lab was designed to teach the principle of osmosis while also providing an experience for students to use the skills and practices commonly found in science. Students first design their own experiment using very basic equipment and supplies, which generally results in mixed, but mostly poor, outcomes. Classroom "talk…

42 CFR 52d.6 - Grant awards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... objectives are designed to aid students: (i) To acquire a basic understanding of fundamental principles of... awards will be made after consideration of such factors as the grantee's progress and management...

Some General Principles in Cryogenic Design, Implementation, and Testing

NASA Technical Reports Server (NTRS)

Dipirro, Michael James

2015-01-01

Brief Course Description: In 2 hours only the most basic principles of cryogenics can be presented. I will concentrate on the differences between a room temperature thermal analysis and cryogenic thermal analysis, namely temperature dependent properties. I will talk about practical materials for thermal contact and isolation. I will finish by describing the verification process and instrumentation used that is unique to cryogenic (in general less than 100K) systems.

Future Generation Network Architecture (New Arch)

DTIC Science & Technology

2004-06-01

Laboratory/IFKF, Rome NY. Other, unfunded, participants in the project included the UC Berkeley ICSI Center for Internet Research (Mark Handley), and an...developed in the late 1970s under DARPA’s Internet research program. The global technical principles, or architecture, of the Internet design represented a...wide range of key aspects of the basic architecture, in search of unifying principles. The success of the original DARPA Internet research program

Discovering [superscript 13]C NMR, [superscript 1]H NMR, and IR Spectroscopy in the General Chemistry Laboratory through a Sequence of Guided-Inquiry Exercises

ERIC Educational Resources Information Center

Iler, H. Darrell; Justice, David; Brauer, Shari; Landis, Amanda

2012-01-01

This sequence of three guided-inquiry labs is designed for a second-semester general chemistry course and challenges students to discover basic theoretical principles associated with [superscript 13]C NMR, [superscript 1]H NMR, and IR spectroscopy. Students learn to identify and explain basic concepts of magnetic resonance and vibrational…

PACS—Realization of an adaptive concept using pressure actuated cellular structures

NASA Astrophysics Data System (ADS)

Gramüller, B.; Boblenz, J.; Hühne, C.

2014-10-01

A biologically inspired concept is investigated which can be utilized to develop energy efficient, lightweight and applicational flexible adaptive structures. Building a real life morphing unit is an ambitious task as the numerous works in the particular field show. Summarizing fundamental demands and barriers regarding shape changing structures, the basic challenges of designing morphing structures are listed. The concept of Pressure Actuated Cellular Structures (PACS) is arranged within the recent morphing activities and it is shown that it complies with the underlying demands. Systematically divided into energy-related and structural subcomponents the working principle is illuminated and relationships between basic design parameters are expressed. The analytical background describing the physical mechanisms of PACS is presented in concentrated manner. This work focuses on the procedure of dimensioning, realizing and experimental testing of a single cell and a single row cantilever made of PACS. The experimental outcomes as well as the results from the FEM computations are used for evaluating the analytical methods. The functionality of the basic principle is thus validated and open issues are determined pointing the way ahead.

Laser Holography.

ERIC Educational Resources Information Center

Rapp, Carl Steven

1997-01-01

Discusses the principles behind holograms: the design and procedure to make either a reflection hologram or a transmission hologram, developing the hologram, safety precautions, and classroom applications. (JRH)

The BEST Blueprint. Quality ABE in the Workplace.

ERIC Educational Resources Information Center

Westberry, Susan

The Basic Educational Skills Training (BEST) workplace literacy demonstration model was designed to provide adult basic education (ABE) services simultaneously for multiple employers in Maury County, Tennessee. The BEST model focused on job-related instruction. The goal of the program was to achieve increased safety, productivity, and employee…

Application of Function-Failure Similarity Method to Rotorcraft Component Design

NASA Technical Reports Server (NTRS)

Roberts, Rory A.; Stone, Robert E.; Tumer, Irem Y.; Clancy, Daniel (Technical Monitor)

2002-01-01

Performance and safety are the top concerns of high-risk aerospace applications at NASA. Eliminating or reducing performance and safety problems can be achieved with a thorough understanding of potential failure modes in the designs that lead to these problems. The majority of techniques use prior knowledge and experience as well as Failure Modes and Effects as methods to determine potential failure modes of aircraft. During the design of aircraft, a general technique is needed to ensure that every potential failure mode is considered, while avoiding spending time on improbable failure modes. In this work, this is accomplished by mapping failure modes to specific components, which are described by their functionality. The failure modes are then linked to the basic functions that are carried within the components of the aircraft. Using this technique, designers can examine the basic functions, and select appropriate analyses to eliminate or design out the potential failure modes. The fundamentals of this method were previously introduced for a simple rotating machine test rig with basic functions that are common to a rotorcraft. In this paper, this technique is applied to the engine and power train of a rotorcraft, using failures and functions obtained from accident reports and engineering drawings.

Fire Safety Training Handbook.

ERIC Educational Resources Information Center

Montgomery County Dept. of Fire and Rescue Services, Rockville, MD. Div. of Fire Prevention.

Designed for a community fire education effort, particularly in which local volunteers present general information on fire safety to their fellow citizens, this workbook contains nine lessons. Included are an overview of the household fire problem; instruction in basic chemistry and physics of fire, flammable liquids, portable fire extinguishers,…

Engineering and design of vessels for sea transport of animals: the Australian design regulations for livestock carriers.

PubMed

Schultz-Altmann, Alexander G T

2008-01-01

The author outlines the principles underlying the standards employed by the Australian Marine Safety Authority to regulate live animal carriers, vessels used for sea transport of livestock, that operate from Australia. The standards are contained in regulations adopted by the Australian Maritime Safety Authority known as Marine Orders. The Cargo and Cargo Handling-Livestock Marine Order has evolved over time with subsequent 'issues' of the order as a consequence of operational experience and specific research. Recent changes have focused on the need to have adequate redundancy in systems and equipment of ships. A history of the development of these regulations is given and is followed by a description of the principles employed to develop the provisions contained in the regulations.

Biological effects of exposure to magnetic resonance imaging: an overview

PubMed Central

Formica, Domenico; Silvestri, Sergio

2004-01-01

The literature on biological effects of magnetic and electromagnetic fields commonly utilized in magnetic resonance imaging systems is surveyed here. After an introduction on the basic principles of magnetic resonance imaging and the electric and magnetic properties of biological tissues, the basic phenomena to understand the bio-effects are described in classical terms. Values of field strengths and frequencies commonly utilized in these diagnostic systems are reported in order to allow the integration of the specific literature on the bio-effects produced by magnetic resonance systems with the vast literature concerning the bio-effects produced by electromagnetic fields. This work gives an overview of the findings about the safety concerns of exposure to static magnetic fields, radio-frequency fields, and time varying magnetic field gradients, focusing primarily on the physics of the interactions between these electromagnetic fields and biological matter. The scientific literature is summarized, integrated, and critically analyzed with the help of authoritative reviews by recognized experts, international safety guidelines are also cited. PMID:15104797

INSTRUCTIONAL GUIDE FOR ELECTRICITY, JUNIOR HIGH SCHOOL INDUSTRIAL ARTS.

ERIC Educational Resources Information Center

GOLDSMITH, J. LYMAN

THIS GUIDE IS DESIGNED TO PROVIDE A PRACTICAL REFERENCE FOR TEACHERS PLANNING INSTRUCTION CONCERNING ELECTRICITY IN JUNIOR HIGH SCHOOL INDUSTRIAL ARTS CLASSES. THE GUIDE IS FOR A 10-WEEK COURSE DESIGNED TO PROVIDE THE STUDENT WITH EXPLORATORY EXPERIENCES INVOLVING THE BASIC PRINCIPLES AND APPLICATIONS OF ELECTRICITY AND ELECTRONICS. THE PROPER USE…

29 CFR 1910.144 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Safety color code for marking physical hazards. 1910.144... § 1910.144 Safety color code for marking physical hazards. (a) Color identification—(1) Red. Red shall be... basic color for designating caution and for marking physical hazards such as: Striking against...

Multimedia Design Principles in the Psychomotor Domain: The Effect of Multimedia and Spatial Contiguity on Students' Learning of Basic Life Support with Task Cards

ERIC Educational Resources Information Center

Iserbyt, Peter; Mols, Liesbet; Elen, Jan; Behets, Daniel

2012-01-01

This study adds to the literature by introducing multimedia research in the psychomotor area. In this study, 87 freshman students in pedagogy used task cards to learn Basic Life Support (BLS), a psychomotor skill consisting of nine lifesaving actions to be performed in a specific order. Task cards are printed materials and are often implemented…

41 CFR 102-85.25 - What is the basic principle governing OAs?

Code of Federal Regulations, 2010 CFR

2010-07-01

... principle governing OAs? 102-85.25 Section 102-85.25 Public Contracts and Property Management Federal... POLICY FOR OCCUPANCY IN GSA SPACE Pricing Policy-General § 102-85.25 What is the basic principle governing OAs? The basic principle governing OAs is to adopt the private sector practice of capturing in a...

AquaSMART: Water & Boating Safety, Grades 3-5. Teacher's Guide.

ERIC Educational Resources Information Center

Texas State Dept. of Parks and Wildlife, Austin.

This teacher's guide accompanies a program designed to teach water and boating safety to students in grades 3-5. The written curriculum accompanies a video, AquaSMART 3-5. The theme of the curriculum is AquaSMART. To become AquaSMART, students must learn 10 basic lessons for water and boating safety. The written curriculum begins with an overview…

AquaSMART: Water & Boating Safety, Grades K-2. Teacher's Guide.

ERIC Educational Resources Information Center

Texas State Dept. of Parks and Wildlife, Austin.

This teacher's guide accompanies a program designed to teach water and boating safety to students in grades K-2. The written curriculum accompanies a video, AquaSMART K-2. The theme of the curriculum is AquaSMART. To become AquaSMART, students must learn 10 basic lessons for water and boating safety. The teacher's guide begins with an overview of…

The Influence of Older Age Groups to Sustainable Product Design Research of Urban Public Facilities

NASA Astrophysics Data System (ADS)

Wen-juan, Zhang; Hou-peng, Song

2017-01-01

Through summarize the status quo of public facilities design to older age groups in China and a variety of factors what influence on them, the essay, from different perspective, is designed to put forward basic principle to sustainable design of public facilities for the aged in the city, and thus further promote and popularize the necessity of sustainable design applications in the future design of public facilities for elderly people.

76 FR 70150 - Draft Guidance for Industry and Food and Drug Administration Staff; Investigational Device...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-10

... proof of principle and initial clinical safety data before the device design is finalized. This draft... to the Division of Dockets Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane, rm.... Early feasibility studies allow for early clinical evaluation of devices to provide proof of principle...

Design of high reliability organizations in health care.

PubMed

Carroll, J S; Rudolph, J W

2006-12-01

To improve safety performance, many healthcare organizations have sought to emulate high reliability organizations from industries such as nuclear power, chemical processing, and military operations. We outline high reliability design principles for healthcare organizations including both the formal structures and the informal practices that complement those structures. A stage model of organizational structures and practices, moving from local autonomy to formal controls to open inquiry to deep self-understanding, is used to illustrate typical challenges and design possibilities at each stage. We suggest how organizations can use the concepts and examples presented to increase their capacity to self-design for safety and reliability.

Design and Stability of an On-Orbit Attitude Control System Using Reaction Control Thrusters

NASA Technical Reports Server (NTRS)

Hall, Robert A.; Hough, Steven; Orphee, Carolina; Clements, Keith

2016-01-01

Basic principles for the design and stability of a spacecraft on-orbit attitude control system employing on-off Reaction Control System (RCS) thrusters are presented. Both vehicle dynamics and the control system actuators are inherently nonlinear, hence traditional linear control system design approaches are not directly applicable. This paper has two main aspects: It summarizes key RCS design principles from earlier NASA vehicles, notably the Space Shuttle and Space Station programs, and introduces advances in the linear modelling and analyses of a phase plane control system derived in the initial development of the NASA's next upper stage vehicle, the Exploration Upper Stage (EUS). Topics include thruster hardware specifications, phase plane design and stability, jet selection approaches, filter design metrics, and RCS rotational maneuver logic.

21 CFR 320.27 - Guidelines on the design of a multiple-dose in vivo bioavailability study.

Code of Federal Regulations, 2011 CFR

2011-04-01

... vivo bioavailability study. 320.27 Section 320.27 Food and Drugs FOOD AND DRUG ADMINISTRATION... Guidelines on the design of a multiple-dose in vivo bioavailability study. (a) Basic principles. (1) In... labeling of the test product. (3) A multiple-dose study may be required to determine the bioavailability of...

Application of reverse osmosis in purifying drinking water

NASA Astrophysics Data System (ADS)

Jiang, Lei; Tu, Yue; Li, Xiangmin; Li, Haixiang

2018-06-01

In view of the shortage of water resources and the pollution of water environment, the development of efficient water purification technology is one of the effective ways to ensure the safety of drinking water. The technology of reverse osmosis has attracted much attention in the application of drinking water security for its advantages of no phase change and simple equipment. This paper briefly introduces the research progress at home and abroad, basic principles, process flow diagram, advantages and disadvantages and development direction of the technology.

Joining Others for Community Economic Development.

ERIC Educational Resources Information Center

Borgen, Joseph A.; Shade, William B.

1984-01-01

Examines the basic principles of economic development and provides a case study of the Communitywide Work Force Development Project, which was designed to involve the community in solving the economic development and work force problems of Terre Haute, Indiana. (DMM)

Developing a complex systems perspective for medical education to facilitate the integration of basic science and clinical medicine.

PubMed

Aron, David C

2017-04-01

The purpose of medical education is to produce competent and capable professional practitioners who can combine the art and science of medicine. Moreover, this process must prepare individuals to practise in a field in which knowledge is increasing and the contexts in which that knowledge is applied are changing in unpredictable ways. The 'basic sciences' are important in the training of a physician. The goal of basic science training is to learn it in a way that the material can be applied in practice. Much effort has been expended to integrate basic science and clinical training, while adding many other topics to the medical curriculum. This effort has been challenging. The aims of the paper are (1) to propose a unifying conceptual framework that facilitates knowledge integration among all levels of living systems from cell to society and (2) illustrate the organizing principles with two examples of the framework in action - cybernetic systems (with feedback) and distributed robustness. Literature related to hierarchical and holarchical frameworks was reviewed. An organizing framework derived from living systems theory and spanning the range from molecular biology to health systems management was developed. The application of cybernetic systems to three levels (regulation of pancreatic beta cell production of insulin, physician adjustment of medication for glycaemic control and development and action of performance measures for diabetes care) was illustrated. Similarly distributed robustness was illustrated by the DNA damage response system and principles underlying patient safety. Each of the illustrated organizing principles offers a means to facilitate the weaving of basic science and clinical medicine throughout the course of study. The use of such an approach may promote systems thinking, which is a core competency for effective and capable medical practice. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

Study on high reliability safety valve for railway vehicle

NASA Astrophysics Data System (ADS)

Zhang, Xuan; Chen, Ruikun; Zhang, Shixi; Xu, BuDu

2017-09-01

Now, the realization of most of the functions of the railway vehicles rely on compressed air, so the demand for compressed air is growing higher and higher. This safety valve is a protection device for pressure limitation and pressure relief in an air supply system of railway vehicles. I am going to introduce the structure, operating principle, research and development process of the safety valve designed by our company in this document.

Basic Welding Skills. Welding Module 1. Instructor's Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This guide is intended to assist vocational educators in teaching a six-unit module in basic welding skills. The module is part of a welding curriculum that has been designed to be totally integrated with Missouri's Vocational Instruction Management System. The following topics are covered in the module: the welding profession, personal safety,…

A new method of search design of refrigerating systems containing a liquid and gaseous working medium based on the graph model of the physical operating principle

NASA Astrophysics Data System (ADS)

Yakovlev, A. A.; Sorokin, V. S.; Mishustina, S. N.; Proidakova, N. V.; Postupaeva, S. G.

2017-01-01

The article describes a new method of search design of refrigerating systems, the basis of which is represented by a graph model of the physical operating principle based on thermodynamical description of physical processes. The mathematical model of the physical operating principle has been substantiated, and the basic abstract theorems relatively semantic load applied to nodes and edges of the graph have been represented. The necessity and the physical operating principle, sufficient for the given model and intended for the considered device class, were demonstrated by the example of a vapour-compression refrigerating plant. The example of obtaining a multitude of engineering solutions of a vapour-compression refrigerating plant has been considered.

100 years of occupational safety research: From basic protections and work analysis to a multilevel view of workplace safety and risk.

PubMed

Hofmann, David A; Burke, Michael J; Zohar, Dov

2017-03-01

Starting with initiatives dating back to the mid-1800s, we provide a high-level review of the key trends and developments in the application of applied psychology to the field of occupational safety. Factory laws, basic worker compensation, and research on accident proneness comprised much of the early work. Thus, early research and practice very much focused on the individual worker, the design of their work, and their basic protection. Gradually and over time, the focus began to navigate further into the organizational context. One of the early efforts to broaden beyond the individual worker was a significant focus on safety-related training during the middle of the 20th century. Toward the latter years of the 20th century and continuing the move from the individual worker to the broader organizational context, there was a significant increase in leadership and organizational climate (safety climate) research. Ultimately, this resulted in the development of a multilevel model of safety culture/climate. After discussing these trends, we identify key conclusions and opportunities for future research. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Manual de Salud Familiar y Primeros Auxilios (Family Health and First Aid Manual).

ERIC Educational Resources Information Center

Torres De Leon, Juana Maria

This textbook is part of a Mexican series of instructional materials designed for Spanish speaking adults who are in the process of becoming literate or have recently become literate in their native language. This textbook is designed to strengthen reading and writing skills while teaching basic principles and techniques to improve family health.…

Health and Family Living. Teacher Guidebook and Student Activity Book. Adult Basic Education Project REAL: Relevant Education for Adult Learners.

ERIC Educational Resources Information Center

Edgar, S. Keith

This packet contains both a teacher's guide and a student activity book designed to help adult students learn about health and family living. Both booklets cover the following topics: health in the home, safety in the home (safety tips concerning children, tips on indoor safety, first aid), helping children with school activities, leisure time and…

Adult Basic Education Curriculum Guide for ABE Programs Serving Psychiatrically Ill Adult Students.

ERIC Educational Resources Information Center

Collier, Ezma V.

This curriculum guide is designed for use in adult basic education (ABE) programs serving psychiatrically ill adult students. Covered in the individual units are the following topics: personal hygiene and grooming, nutrition and health, money and money management, transportation and safety, government and law, values clarification, and…

A critical assessment of regulatory triggers for products of biotechnology: Product vs. process.

PubMed

McHughen, Alan

2016-10-01

Regulatory policies governing the safety of genetic engineering (rDNA) and the resulting products (GMOs) have been contentious and divisive, especially in agricultural applications of the technologies. These tensions led to vastly different approaches to safety regulation in different jurisdictions, even though the intent of regulations-to assure public and environmental safety-are common worldwide, and even though the international scientific communities agree on the basic principles of risk assessment and risk management. So great are the political divisions that jurisdictions cannot even agree on the appropriate triggers for regulatory capture, whether product or process. This paper reviews the historical policy and scientific implications of agricultural biotechnology regulatory approaches taken by the European Union, USA and Canada, using their respective statutes and regulations, and then critically assesses the scientific underpinnings of each.

Storage and handling of aviation fuels at airports

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-01-01

This standard covers the basic principles for the design of fuel handling facilities and equipment at airports. It provides a reference for the planning and operation of aviation fuel handling facilities and associated equipment.

The Central Endocrine Glands: Intertwining Physiology and Pharmacy

PubMed Central

2007-01-01

The initial courses in didactic pharmacy curriculum are designed to provide core scientific knowledge and develop learning skills that are the basis for highly competent application and practice of pharmacy. Commonly, students interpret this scientific base as ancillary to the practice of pharmacy. Physiology courses present a natural opportunity for the instructor to introduce basic pharmaceutical principles that form the foundation of pharmacological application early in the professional curriculum. Human Physiology I is the first of a 2-course physiology sequence that pharmacy students take upon matriculating into Midwestern University College of Pharmacy-Glendale. The endocrine physiology section of this course is designed to emphasize the regulatory and compensatory nature of this system in maintaining homeostasis, but also includes aspects of basic pharmaceutical principles. In this way the dependency of physiology and pharmacy upon one another is accentuated. The lecture format and content described in this manuscript focus on the central endocrine glands and illustrates their vital role in normal body function, compensatory responses to disease states, and their components as pharmacotherapy targets. The integration of these pharmaceutical principles at the introductory level supports an environment that can alleviate any perceived disparity between science foundation and practical application in the profession of pharmacy. PMID:17998993

Design and construction of functional AAV vectors.

PubMed

Gray, John T; Zolotukhin, Serge

2011-01-01

Using the basic principles of molecular biology and laboratory techniques presented in this chapter, researchers should be able to create a wide variety of AAV vectors for both clinical and basic research applications. Basic vector design concepts are covered for both protein coding gene expression and small non-coding RNA gene expression cassettes. AAV plasmid vector backbones (available via AddGene) are described, along with critical sequence details for a variety of modular expression components that can be inserted as needed for specific applications. Protocols are provided for assembling the various DNA components into AAV vector plasmids in Escherichia coli, as well as for transferring these vector sequences into baculovirus genomes for large-scale production of AAV in the insect cell production system.

Does ought imply can?

PubMed Central

Kurthy, Miklos; Lawford-Smith, Holly; Sousa, Paulo

2017-01-01

Most philosophers believe that a person can have an obligation only insofar as she is able to fulfil it, a principle generally referred to as “Ought Implies Can”. Arguably, this principle reflects something basic about the ordinary concept of obligation. However, in a paper published recently in this journal, Wesley Buckwalter and John Turri presented evidence for the conclusion that ordinary people in fact reject that principle. With a series of studies, they claimed to have demonstrated that, in people’s judgements, obligations persist irrespective of whether those who hold them have the ability to fulfil them. We argue in this paper that due to some problems in their design, Buckwalter & Turri’s conclusions may not be warranted. We present the results of a series of studies demonstrating the problems with their design and showing that, with an improved design, people judge that obligation depends on ability after all. PMID:28403195

Construction Trade Course. Bilingual Vocational Instructional Materials.

ERIC Educational Resources Information Center

Lopez-Cox, Guadalupe

This building trades course, one of a series of bilingual English-Spanish vocational education courses, is designed to introduce the basic skills that a student must know in the construction field. It is geared to teach the student basic manipulative skills, safety judgments, proper work habits, desirable attitudes, and proper behavior for initial…

Basic Health Education for Farmers in Latin America.

ERIC Educational Resources Information Center

Hai, Dorothy M.

1980-01-01

Describes a public health program designed to improve the standard of living of Latin American farmers. Outlines a training course for veterinarian-instructors who are sent to rural areas to teach farmers principles of animal health and disease control. (SK)

The Auto

ERIC Educational Resources Information Center

Novick, Sheldon

1976-01-01

The basic automobile design has persisted for fifty years with innovations only in production and marketing. Complex interrelationships among steel, oil, rubber, road building, and automobile industries perpetuate the "modern Model T's." Efforts to alter design to meet safety and environmental standards face tremendous resistance from a…

An integrated systems engineering approach to aircraft design

NASA Astrophysics Data System (ADS)

Price, M.; Raghunathan, S.; Curran, R.

2006-06-01

The challenge in Aerospace Engineering, in the next two decades as set by Vision 2020, is to meet the targets of reduction of nitric oxide emission by 80%, carbon monoxide and carbon dioxide both by 50%, reduce noise by 50% and of course with reduced cost and improved safety. All this must be achieved with expected increase in capacity and demand. Such a challenge has to be in a background where the understanding of physics of flight has changed very little over the years and where industrial growth is driven primarily by cost rather than new technology. The way forward to meet the challenges is to introduce innovative technologies and develop an integrated, effective and efficient process for the life cycle design of aircraft, known as systems engineering (SE). SE is a holistic approach to a product that comprises several components. Customer specifications, conceptual design, risk analysis, functional analysis and architecture, physical architecture, design analysis and synthesis, and trade studies and optimisation, manufacturing, testing validation and verification, delivery, life cycle cost and management. Further, it involves interaction between traditional disciplines such as Aerodynamics, Structures and Flight Mechanics with people- and process-oriented disciplines such as Management, Manufacturing, and Technology Transfer. SE has become the state-of-the-art methodology for organising and managing aerospace production. However, like many well founded methodologies, it is more difficult to embody the core principles into formalised models and tools. The key contribution of the paper will be to review this formalisation and to present the very latest knowledge and technology that facilitates SE theory. Typically, research into SE provides a deeper understanding of the core principles and interactions, and helps one to appreciate the required technical architecture for fully exploiting it as a process, rather than a series of events. There are major issues as regards to systems approach to aircraft design and these include lack of basic scientific/practical models and tools for interfacing and integrating the components of SE and within a given component, for example, life cycle cost, basic models for linking the key drivers. The paper will review the current state of art in SE approach to aircraft design and identify some of the major challenges, the current state of the art and visions for the future. The review moves from an initial basis in traditional engineering design processes to consideration of costs and manufacturing in this integrated environment. Issues related to the implementation of integration in design at the detailed physics level are discussed in the case studies.

Overlapping and permeability: Research on the pattern hierarchy of communication space and design strategy based on environmental behavior

NASA Astrophysics Data System (ADS)

Leilei, Sun; Liang, Zhang; Bing, Chen; Hong, Xi

2017-11-01

This thesis is to analyze the basic pattern hierarchy of communication space by using the theory of environmental psychology and behavior combined with relevant principles in architecture, to evaluate the design and improvement of communication space in specific meaning, and to bring new observation ideas and innovation in design methods to the system of space, environment and behavior.

Improvements in safety testing of lithium cells

NASA Astrophysics Data System (ADS)

Stinebring, R. C.; Krehl, P.

1985-07-01

A systematic approach was developed for evaluating the basic safety parameters of high power lithium soluble cathode cells. This approach consists of performing a series of tests on each cell model during the design, prototype and production phases. Abusive testing is performed in a facility where maximum protection is given to test personnel.

Improvements in safety testing of lithium cells

NASA Technical Reports Server (NTRS)

Stinebring, R. C.; Krehl, P.

1985-01-01

A systematic approach was developed for evaluating the basic safety parameters of high power lithium soluble cathode cells. This approach consists of performing a series of tests on each cell model during the design, prototype and production phases. Abusive testing is performed in a facility where maximum protection is given to test personnel.

How Can We Improve School Safety Research?

ERIC Educational Resources Information Center

Astor, Ron Avi; Guerra, Nancy; Van Acker, Richard

2010-01-01

The authors of this article consider how education researchers can improve school violence and school safety research by (a) examining gaps in theoretical, conceptual, and basic research on the phenomena of school violence; (b) reviewing key issues in the design and evaluation of evidence-based practices to prevent school violence; and (c)…

Demonstrating the Safety and Reliability of a New System or Spacecraft: Incorporating Analyses and Reviews of the Design and Processing in Determining the Number of Tests to be Conducted

NASA Technical Reports Server (NTRS)

Vesely, William E.; Colon, Alfredo E.

2010-01-01

Design Safety/Reliability is associated with the probability of no failure-causing faults existing in a design. Confidence in the non-existence of failure-causing faults is increased by performing tests with no failure. Reliability-Growth testing requirements are based on initial assurance and fault detection probability. Using binomial tables generally gives too many required tests compared to reliability-growth requirements. Reliability-Growth testing requirements are based on reliability principles and factors and should be used.

Deriving Function-failure Similarity Information for Failure-free Rotorcraft Component Design

NASA Technical Reports Server (NTRS)

Roberts, Rory A.; Stone, Robert B.; Tumer, Irem Y.; Clancy, Daniel (Technical Monitor)

2002-01-01

Performance and safety are the top concerns of high-risk aerospace applications at NASA. Eliminating or reducing performance and safety problems can be achieved with a thorough understanding of potential failure modes in the design that lead to these problems. The majority of techniques use prior knowledge and experience as well as Failure Modes and Effects as methods to determine potential failure modes of aircraft. The aircraft design needs to be passed through a general technique to ensure that every potential failure mode is considered, while avoiding spending time on improbable failure modes. In this work, this is accomplished by mapping failure modes to certain components, which are described by their functionality. In turn, the failure modes are then linked to the basic functions that are carried within the components of the aircraft. Using the technique proposed in this paper, designers can examine the basic functions, and select appropriate analyses to eliminate or design out the potential failure modes. This method was previously applied to a simple rotating machine test rig with basic functions that are common to a rotorcraft. In this paper, this technique is applied to the engine and power train of a rotorcraft, using failures and functions obtained from accident reports and engineering drawings.

Beware of agents when flying aircraft: Basic principles behind a generic methodology for the evaluation and certification of advanced aviation systems

NASA Technical Reports Server (NTRS)

Javaux, Denis; Masson, Michel; Dekeyser, Veronique

1994-01-01

There is currently a growing interest in the aeronautical community to assess the effects of the increasing levels of automation on pilots' performance and overall safety. The first effect of automation is the change in the nature of the pilot's role on the flight deck. Pilots have become supervisors who monitor aircraft systems in usual situations and intervene only when unanticipated events occur. Instead of 'hand flying' the airplane, pilots contribute to the control of aircraft by acting as mediators, instructions given to the automation. By eliminating the need for manually controlling normal situations, such a role division has reduced the opportunities for the pilot to acquire experience and skills necessary to safely cope with abnormal events. Difficulties in assessing the state and behavior of automation arise mainly from four factors: (1) the complexity of current systems and consequence mode-related problems; (2) the intrinsic autonomy of automation which is able to fire mode transitions without explicit commands from the pilots; (3) the bad quality of feed-back from the control systems displays and interfaces to the pilots; and (4) the fact that the automation currently has no explicit representation of the current pilots' intentions and strategy. Assuming certification has among its major goals to guarantee the passengers' and pilots' safety and the airplane integrity under normal and abnormal operational conditions, the authors suggest it would be particularly fruitful to come up with a conceptual reference system providing the certification authorities both with a theoretical framework and a list of principles usable for assessing the quality of the equipment and designs under examination. This is precisely the scope of this paper. However, the authors recognize that the conceptual presented is still under development and would thus be best considered as a source of reflection for the design, evaluation and certification processes of advanced aviation technologies.

Design features of fans, blowers, and compressors

NASA Astrophysics Data System (ADS)

Cheremisinoff, N. P.; Cheremisinoff, P. N.

Fan engineering and compression machines are discussed. Basic aspects of fan performance and design are reviewed, and the design and performance characteristics of radial-flow fans, axial-flow fans, and controllable pitch fans are examined in detail. Air-conditioning systems are discussed, and noise, vibration, and mechanical considerations in fans are extensively examined. The thermodynamic principles governing compression machines are reviewed, and piston compressors, rotary compressors, blowers, and centrifugal compressors are discussed.

Bricklaying Curriculum: Basic Core. Instructional Materials. Revised.

ERIC Educational Resources Information Center

Turcotte, Raymond J.; Hendrix, Laborn J.

This volume, the first in a two-volume core curriculum, is designed for use in teaching a course in basic bricklaying. Included in the introductory section of the guide are units on the free enterprise system, the economics of free enterprise, industry orientation, ways of becoming a good leader, job advancement, and safety and first aid. The next…

Material design and structural color inspired by biomimetic approach

PubMed Central

Saito, Akira

2011-01-01

Generation of structural color is one of the essential functions realized by living organisms, and its industrial reproduction can result in numerous applications. From this viewpoint, the mechanisms, materials, analytical methods and fabrication technologies of the structural color are reviewed in this paper. In particular, the basic principles of natural photonic materials, the ideas developed from these principles, the directions of applications and practical industrial realizations are presented by summarizing the recent research results. PMID:27877459

Medical management of youth baseball and softball tournaments.

PubMed

Kanaan, Matthew; Ray, Tracy R

2013-01-01

The medical management of youth baseball and softball tournaments requires both proper planning and a basic awareness of commonly seen sport-specific injuries. While youth sporting events are designed to be a fun experience for all, injuries and emergencies will occur. With proper planning, and supplies, the impact of these issues can be minimized. This article will outline some basic principles for the medical personnel that may be involved in youth baseball and softball events.

Do Racial and Gender Disparities Exist in Newer Glaucoma Treatments?

MedlinePlus

... 2019 Basic and Clinical Science Course, Section 02: Fundamentals and Principles of Ophthalmology 2018-2019 Basic and ... 2019 Basic and Clinical Science Course, Section 02: Fundamentals and Principles of Ophthalmology Print 2018-2019 Basic ...

Safe School Design: A Handbook for Educational Leaders Applying the Principles of Crime Prevention through Environmental Design.

ERIC Educational Resources Information Center

Schneider, Tod; Walker, Hill; Sprague, Jeffrey

This document seeks to synthesize, integrate, and make available to school personnel solid information regarding Crime Prevention through Environmental Design (CPTED). Chapter 1, "The Changed Landscape of School Safety and Security," examines characteristics of safe and unsafe schools, causes of vulnerability, and the role of design and technology…

Key Problems of Fire Safety Enforcement in Traffic and Communication Centers (TCC)

NASA Astrophysics Data System (ADS)

Medyanik, M.; Zosimova, O.

2017-10-01

A Traffic and Communication Center (TCC) means facilities designed and used to distribute and redirect flows of humans and motor vehicles while they get serviced and operate. This paper sets forth the basic problems of fire safety enforcement on the TCC, and the causes that slow down human and vehicle traffic speeds. It proposes ways to solve the problems of fire safety enforcement on the TCC, in the Russian Federation and elsewhere. Engineering solutions are proposed for TCC design, with key outlooks of TCC future development as an alternative way to organize access in transportation.

Dynamic Pressure Microphones

NASA Astrophysics Data System (ADS)

Werner, E.

In 1876, Alexander Graham Bell described his first telephone with a microphone using magnetic induction to convert the voice input into an electric output signal. The basic principle led to a variety of designs optimized for different needs, from hearing impaired users to singers or broadcast announcers. From the various sound pressure versions, only the moving coil design is still in mass production for speech and music application.

Early developments in solar cooling equipment

NASA Technical Reports Server (NTRS)

Price, J. M.

1978-01-01

A brief description of a development program to design, fabricate and field test a series of solar operated or driven cooling devices, undertaken by the Marshall Space Flight Center in the context of the Solar Heating and Cooling Demonstration Act of 1974, is presented. Attention is given to two basic design concepts: the Rankine cycle principle and the use of a dessicant for cooling.

Auto-Mechanics Course. Bilingual Vocational Instructional Materials.

ERIC Educational Resources Information Center

Lopez-Cox, Guadalupe

This auto-mechanics course, one of a series of bilingual English-Spanish vocational education courses, is designed to introduce the basic skills that an automotive mechanics student should know. It is geared to teach the student basic manipulative skills, safety judgments, proper work habits, desirable attitudes, and proper behavior for initial…

DESIGNA ND ANALYSIS FOR THEMATIC MAP ACCURACY ASSESSMENT: FUNDAMENTAL PRINCIPLES

EPA Science Inventory

Before being used in scientific investigations and policy decisions, thematic maps constructed from remotely sensed data should be subjected to a statistically rigorous accuracy assessment. The three basic components of an accuracy assessment are: 1) the sampling design used to s...

Basic Science Considerations in Primary Total Hip Replacement Arthroplasty

PubMed Central

Mirza, Saqeb B; Dunlop, Douglas G; Panesar, Sukhmeet S; Naqvi, Syed G; Gangoo, Shafat; Salih, Saif

2010-01-01

Total Hip Replacement is one of the most common operations performed in the developed world today. An increasingly ageing population means that the numbers of people undergoing this operation is set to rise. There are a numerous number of prosthesis on the market and it is often difficult to choose between them. It is therefore necessary to have a good understanding of the basic scientific principles in Total Hip Replacement and the evidence base underpinning them. This paper reviews the relevant anatomical and biomechanical principles in THA. It goes on to elaborate on the structural properties of materials used in modern implants and looks at the evidence base for different types of fixation including cemented and uncemented components. Modern bearing surfaces are discussed in addition to the scientific basis of various surface engineering modifications in THA prostheses. The basic science considerations in component alignment and abductor tension are also discussed. A brief discussion on modular and custom designs of THR is also included. This article reviews basic science concepts and the rationale underpinning the use of the femoral and acetabular component in total hip replacement. PMID:20582240

Effectiveness of an infection control programmed unit of instruction in nursing education.

PubMed

Goldrick, B A

1987-02-01

To determine whether programmed instruction is an acceptable, cost-effective alternative to classroom lectures for teaching the basic principles of infection control to nursing students, a 46-frame programmed unit of instruction (PUI), with a pretest and posttest, was developed, piloted, and tested for reliability and validity. The instruments were developed on the basis of current knowledge of the epidemiology of infectious diseases and the 1983 revised Centers for Disease Control guideline for category-specific isolation precautions. A study was undertaken to test the hypothesis: Student nurses who take a PUI in the basic principles of infection control will score higher on posttests than those who do not take the PUI. A sample of 40 subjects was selected from the senior class in a baccalaureate nursing program at a public university. The subjects were randomly assigned to four groups of 10. A Solomon four-group design was used for data analysis, and a two-way analysis of variance was performed on the posttest means. Results indicated that the treatment (PUI) effect was significant (p less than 0.001). Therefore, it was concluded that the PUI in the basic principles of infection control is an effective instrument for nursing education.

The Development and Maturation of Humanitarian Psychology

ERIC Educational Resources Information Center

Jacobs, Gerard A.

2007-01-01

Humanitarian psychological support as an organized field is relatively young. Pioneers in the field were involved primarily in providing psychological support to refugees and internally displaced persons in conflict and nonconflict situations. This article describes basic principles for the design of psychological support programs and…

Design of high reliability organizations in health care

PubMed Central

Carroll, J S; Rudolph, J W

2006-01-01

To improve safety performance, many healthcare organizations have sought to emulate high reliability organizations from industries such as nuclear power, chemical processing, and military operations. We outline high reliability design principles for healthcare organizations including both the formal structures and the informal practices that complement those structures. A stage model of organizational structures and practices, moving from local autonomy to formal controls to open inquiry to deep self‐understanding, is used to illustrate typical challenges and design possibilities at each stage. We suggest how organizations can use the concepts and examples presented to increase their capacity to self‐design for safety and reliability. PMID:17142607

Radioisotope powered alkali metal thermoelectric converter design for space systems

NASA Technical Reports Server (NTRS)

Sievers, R. K.; Bankston, C. P.

1988-01-01

The design concept of an alkali-metal thermoelectric converter (AMTEC) for 15-30-percent-efficient conversion of heat from the General Purpose (radioisotope) Heat Source (GPHS) on spacecraft is presented. The basic physical principles of the conversion cycle are outlined; a theoretical model is derived; a modular design is described and illustrated with drawings; and the overall AMTEC/GPHS system design is characterized. Predicted performance data are presented in extensive tables and graphs and discussed in detail.

Thinking inside the Box Constrained Creativity and New Technology

ERIC Educational Resources Information Center

Gill, Bradley

2012-01-01

Thinking outside of the box is a standard cliche for creativity. Yet an awareness of the boxed nature of new media can empower young students to think creatively about design. This article is a reflection of one teacher who led a group of young students in a series of lessons based on basic design principles related to technology. It is based on…

Instrumental variable methods in comparative safety and effectiveness research.

PubMed

Brookhart, M Alan; Rassen, Jeremy A; Schneeweiss, Sebastian

2010-06-01

Instrumental variable (IV) methods have been proposed as a potential approach to the common problem of uncontrolled confounding in comparative studies of medical interventions, but IV methods are unfamiliar to many researchers. The goal of this article is to provide a non-technical, practical introduction to IV methods for comparative safety and effectiveness research. We outline the principles and basic assumptions necessary for valid IV estimation, discuss how to interpret the results of an IV study, provide a review of instruments that have been used in comparative effectiveness research, and suggest some minimal reporting standards for an IV analysis. Finally, we offer our perspective of the role of IV estimation vis-à-vis more traditional approaches based on statistical modeling of the exposure or outcome. We anticipate that IV methods will be often underpowered for drug safety studies of very rare outcomes, but may be potentially useful in studies of intended effects where uncontrolled confounding may be substantial.

First Order Reliability Application and Verification Methods for Semistatic Structures

NASA Technical Reports Server (NTRS)

Verderaime, Vincent

1994-01-01

Escalating risks of aerostructures stimulated by increasing size, complexity, and cost should no longer be ignored by conventional deterministic safety design methods. The deterministic pass-fail concept is incompatible with probability and risk assessments, its stress audits are shown to be arbitrary and incomplete, and it compromises high strength materials performance. A reliability method is proposed which combines first order reliability principles with deterministic design variables and conventional test technique to surmount current deterministic stress design and audit deficiencies. Accumulative and propagation design uncertainty errors are defined and appropriately implemented into the classical safety index expression. The application is reduced to solving for a factor that satisfies the specified reliability and compensates for uncertainty errors, and then using this factor as, and instead of, the conventional safety factor in stress analyses. The resulting method is consistent with current analytical skills and verification practices, the culture of most designers, and with the pace of semistatic structural designs.

Interpreting and Integrating Clinical and Anatomic Pathology Results.

PubMed

Ramaiah, Lila; Hinrichs, Mary Jane; Skuba, Elizabeth V; Iverson, William O; Ennulat, Daniela

2017-01-01

The continuing education course on integrating clinical and anatomical pathology data was designed to communicate the importance of using a weight of evidence approach to interpret safety findings in toxicology studies. This approach is necessary, as neither clinical nor anatomic pathology data can be relied upon in isolation to fully understand the relationship between study findings and the test article. Basic principles for correlating anatomic pathology and clinical pathology findings and for integrating these with other study end points were reviewed. To highlight these relationships, a series of case examples, presented jointly by a clinical pathologist and an anatomic pathologist, were used to illustrate the collaborative effort required between clinical and anatomical pathologists. In addition, the diagnostic utility of traditional liver biomarkers was discussed using results from a meta-analysis of rat hepatobiliary marker and histopathology data. This discussion also included examples of traditional and novel liver and renal biomarker data implementation in nonclinical toxicology studies to illustrate the relationship between discrete changes in biochemistry and tissue morphology.

Next Generation Nuclear Plant Defense-in-Depth Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edward G. Wallace; Karl N. Fleming; Edward M. Burns

2009-12-01

The purpose of this paper is to (1) document the definition of defense-in-depth and the pproach that will be used to assure that its principles are satisfied for the NGNP project and (2) identify the specific questions proposed for preapplication discussions with the NRC. Defense-in-depth is a safety philosophy in which multiple lines of defense and conservative design and evaluation methods are applied to assure the safety of the public. The philosophy is also intended to deliver a design that is tolerant to uncertainties in knowledge of plant behavior, component reliability or operator performance that might compromise safety. This papermore » includes a review of the regulatory foundation for defense-in-depth, a definition of defense-in-depth that is appropriate for advanced reactor designs based on High Temperature Gas-cooled Reactor (HTGR) technology, and an explanation of how this safety philosophy is achieved in the NGNP.« less

California Guide for Pedestrian Safety Education. Volumes I-III.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento.

This guide is designed to serve as the basis for a pedestrian safety education program for pupils in kindergarten through grade two. The basic printed materials for use in the program are provided in three volumes, each of which is intended for a different audience. Volume I, directed to school administrators and teachers, contains information for…

A Human Factors Framework for Payload Display Design

NASA Technical Reports Server (NTRS)

Dunn, Mariea C.; Hutchinson, Sonya L.

1998-01-01

During missions to space, one charge of the astronaut crew is to conduct research experiments. These experiments, referred to as payloads, typically are controlled by computers. Crewmembers interact with payload computers by using visual interfaces or displays. To enhance the safety, productivity, and efficiency of crewmember interaction with payload displays, particular attention must be paid to the usability of these displays. Enhancing display usability requires adoption of a design process that incorporates human factors engineering principles at each stage. This paper presents a proposed framework for incorporating human factors engineering principles into the payload display design process.

Glossary of Terms

MedlinePlus

... 2019 Basic and Clinical Science Course, Section 02: Fundamentals and Principles of Ophthalmology 2018-2019 Basic and ... 2019 Basic and Clinical Science Course, Section 02: Fundamentals and Principles of Ophthalmology Print 2018-2019 Basic ...

[Industry regulation and its relationship to the rapid marketing of medical devices].

PubMed

Matsuoka, Atsuko

2012-01-01

In the market of medical devices, non-Japanese products hold a large part even in Japan. To overcome this situation, the Japanese government has been announcing policies to encourage the medical devices industry, such as the 5-year strategy for medical innovation (June 6, 2012). The Division of Medical Devices has been contributing to rapid marketing of medical devices by working out the standards for approval review and accreditation of medical devices, guidances on evaluation of medical devices with emerging technology, and test methods for biological safety evaluation of medical devices, as a part of practice in the field of regulatory science. The recent outcomes are 822 standards of accreditation for Class II medical devices, 14 guidances on safety evaluation of medical devices with emerging technology, and the revised test methods for biological safety evaluation (MHLW Notification by Director, OMDE, Yakushokuki-hatsu 0301 No. 20 "Basic Principles of Biological Safety Evaluation Required for Application for Approval to Market Medical Devices").

Safety evaluation of high-speed rail bogie concepts.

DOT National Transportation Integrated Search

2013-10-01

The study defines the basic design concepts required to provide a safe, reliable, high-speed bogie for the next generation PRIIA passenger locomotive. The requirements and conditions for the U.S. market create unique design challenges that currently ...

National plan to enhance aviation safety through human factors improvements

NASA Technical Reports Server (NTRS)

Foushee, Clay

1990-01-01

The purpose of this section of the plan is to establish a development and implementation strategy plan for improving safety and efficiency in the Air Traffic Control (ATC) system. These improvements will be achieved through the proper applications of human factors considerations to the present and future systems. The program will have four basic goals: (1) prepare for the future system through proper hiring and training; (2) develop a controller work station team concept (managing human errors); (3) understand and address the human factors implications of negative system results; and (4) define the proper division of responsibilities and interactions between the human and the machine in ATC systems. This plan addresses six program elements which together address the overall purpose. The six program elements are: (1) determine principles of human-centered automation that will enhance aviation safety and the efficiency of the air traffic controller; (2) provide new and/or enhanced methods and techniques to measure, assess, and improve human performance in the ATC environment; (3) determine system needs and methods for information transfer between and within controller teams and between controller teams and the cockpit; (4) determine how new controller work station technology can optimally be applied and integrated to enhance safety and efficiency; (5) assess training needs and develop improved techniques and strategies for selection, training, and evaluation of controllers; and (6) develop standards, methods, and procedures for the certification and validation of human engineering in the design, testing, and implementation of any hardware or software system element which affects information flow to or from the human.

Fire Safety: Stop the Heat. Fourth Grade. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the fourth grade component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of fourth grade students, its objectives include: (1) understanding principles of extinguishing fires, (2) investigating issues of peer pressure related to fire setting, (3) developing…

``Dissection'' of a Hair Dryer

NASA Astrophysics Data System (ADS)

Eisenstein, Stan; Simpson, Jeff

2008-12-01

The electrical design of the common hair dryer is based almost entirely on relatively simple principles learned in introductory physics classes. Just as biology students dissect a frog to see the principles of anatomy in action, physics students can "dissect" a hair dryer to see how principles of electricity are used in a real system. They can discover how engineers solve problems such as how to vary between low and high heat and fan speed by simply moving the position of a single switch. Principles of alternating versus direct current, series and parallel circuits, electrical safety, voltage dividing, ac rectification, power, and measurement of resistance and continuity all come in to play.

Guanidinophosphazenes: design, synthesis, and basicity in THF and in the gas phase.

PubMed

Kolomeitsev, Alexander A; Koppel, Ilmar A; Rodima, Toomas; Barten, Jan; Lork, Enno; Röschenthaler, Gerd-Volker; Kaljurand, Ivari; Kütt, Agnes; Koppel, Ivar; Mäemets, Vahur; Leito, Ivo

2005-12-21

A principle for creating a new generation of nonionic superbases is presented. It is based on attachment of tetraalkylguanidino, 1,3-dimethylimidazolidine-2-imino, or bis(tetraalkylguanidino)carbimino groups to the phosphorus atom of the iminophosphorane group using tetramethylguanidine or easily available 1,3-dimethylimidazolidine-2-imine. Seven new nonionic superbasic phosphazene bases, tetramethylguanidino-substituted at the P atom, have been synthesized. Their base strengths are established in tetrahydrofuran (THF) solution by means of spectrophotometric titration and compared with those of eight reference superbases designed specially for this study, P2- and P4-iminophosphoranes. The gas-phase basicities of several guanidino- and N',N',N'',N''-tetramethylguanidino (tmg)-substituted phosphazenes and their cyclic analogues are calculated, and the crystal structures of (tmg)3P=N-t-Bu and (tmg)3P=N-t-Bu x HBF4 are determined. The enormous basicity-increasing effect of this principle is experimentally verified for the tetramethylguanidino groups in the THF medium: the basicity increase when moving from (dma)3P=N-t-Bu (pKalpha = 18.9) to (tmg)3P=N-t-Bu (pKalpha = 29.1) is 10 orders of magnitude. A significantly larger basicity increase (up to 20 powers of 10) is expected (based on the high-level density functional theory calculations) to accompany the similar gas-phase transfer between the (dma)3P=NH and (tmg)3P=NH bases. Far stronger basicities still are expected when, in the latter two compounds, all three dimethylamino (or tetramethylguanidino) fragments are replaced by methylated triguanide fragments, (tmg)2C=N-. The gas-phase basicity (around 300-310 kcal/mol) of the resulting base, [(tmg)2C=N-]3P=NH, having only one phosphorus atom, is predicted to exceed the basicity of (dma)3P=NH by more than 40 powers of 10 and to surpass also the basicity of the widely used commercial [(dma)3P=N]3P=N-t-Bu (t-BuP4) superbase.

Fire safety: A case study of technology transfer

NASA Technical Reports Server (NTRS)

Heins, C. F.

1975-01-01

Two basic ways in which NASA-generated technology is being used by the fire safety community are described. First, improved products and systems that embody NASA technical advances are entering the marketplace. Second, NASA test data and technical information related to fire safety are being used by persons concerned with reducing the hazards of fire through improved design information and standards. The development of commercial fire safety products and systems typically requires adaptation and integration of aerospace technologies that may not have been originated for NASA fire safety applications.

Design Studies of Cardiac Valve Prostheses

PubMed Central

Liotta, Domingo

1985-01-01

This paper indicates the vital importance of considering prosthesis articulation in the design of cardiac valves. The prosthesis articulation interrelates with the fixed and the movable prosthetic components. Two basic physiological hemodynamic principles are reviewed: [List: see text] A bileaflet, free-tilting, swivelling prosthesis with a central articular mechanism is undergoing investigation. The four articulations have their own perennial preserving mechanisms to prevent potential failure mode by collecting blood elements in the valve tilting design. PMID:15227041

Road Infrastructure Safety Management in Poland

NASA Astrophysics Data System (ADS)

Budzynski, Marcin; Jamroz, Kazimierz; Kustra, Wojciech; Michalski, Lech; Gaca, Stanislaw

2017-10-01

The objective of road safety infrastructure management is to ensure that when roads are planned, designed, built and used road risks can be identified, assessed and mitigated. Road transport safety is significantly less developed than that of rail, water and air transport. The average individual risk of being a fatality in relation to the distance covered is thirty times higher in road transport that in the other modes. This is mainly because the different modes have a different approach to safety management and to the use of risk management methods and tools. In recent years Poland has had one of the European Union’s highest road death numbers. In 2016 there were 3026 fatalities on Polish roads with 40,766 injuries. Protecting road users from the risk of injury and death should be given top priority. While Poland’s national and regional road safety programmes address this problem and are instrumental in systematically reducing the number of casualties, the effects are far from the expectations. Modern approaches to safety focus on three integrated elements: infrastructure measures, safety management and safety culture. Due to its complexity, the process of road safety management requires modern tools to help with identifying road user risks, assess and evaluate the safety of road infrastructure and select effective measures to improve road safety. One possible tool for tackling this problem is the risk-based method for road infrastructure safety management. European Union Directive 2008/96/EC regulates and proposes a list of tools for managing road infrastructure safety. Road safety tools look at two criteria: the life cycle of a road structure and the process of risk management. Risk can be minimized through the application of the proposed interventions during design process as reasonable. The proposed methods of risk management bring together two stages: risk assessment and risk response occurring within the analyzed road structure (road network, road stretch, road section, junction, etc.). The objective of the methods is to help road authorities to take rational decisions in the area of road safety and road infrastructure safety and understand the consequences occurring in the particular phases of road life cycle. To help with assessing the impact of a road project on the safety of related roads, a method was developed for long-term forecasts of accidents and accident cost estimation as well as a risk classification to identify risks that are not acceptable risks. With regard to road safety audits and road safety inspection, a set of principles was developed to identify risks and the basic classification of mistakes and omissions. This work has added to the Polish experience of preparing and implementing such tools within the competent road authorities.

21 CFR 812.35 - Supplemental applications.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (including manufacturing changes) that do not constitute a significant change in design or basic principles... reliable information such as clinical information gathered during a trial or marketing. (B) Credible... investigator(s), and/or the data gathered during the clinical trial or marketing. (iv) Notice of IDE change...

Basic design of MRM assays for peptide quantification.

PubMed

James, Andrew; Jorgensen, Claus

2010-01-01

With the recent availability and accessibility of mass spectrometry for basic and clinical research, the requirement for stable, sensitive, and reproducible assays to specifically detect proteins of interest has increased. Multiple reaction monitoring (MRM) or selective reaction monitoring (SRM) is a highly selective, sensitive, and robust assay to monitor the presence and amount of biomolecules. Until recently, MRM was typically used for the detection of drugs and other biomolecules from body fluids. With increased focus on biomarkers and systems biology approaches, researchers in the proteomics field have taken advantage of this approach. In this chapter, we will introduce the reader to the basic principle of designing and optimizing an MRM workflow. We provide examples of MRM workflows for standard proteomic samples and provide suggestions for the reader who is interested in using MRM for quantification.

The role of failure/problems in engineering: A commentary of failures experienced - lessons learned

NASA Technical Reports Server (NTRS)

Ryan, R. S.

1992-01-01

The written version of a series of seminars given to several aerospace companies and three NASA centers are presented. The results are lessons learned through a study of the problems experienced in 35 years of engineering. The basic conclusion is that the primary cause of problems has not been mission technologies, as important as technology is, but the neglect of basic principles. Undergirding this is the lack of a systems focus from determining requirements through design, verification, and operations phases. Many of the concepts discussed are fundamental to total quality management (TQM) and can be used to augment this product enhanced philosophy. Fourteen principles are addressed with problems experienced and are used as examples. Included is a discussion of the implication of constraints, poorly defined requirements, and schedules. Design guidelines, lessons learned, and future tasks are listed. Two additional sections are included that deal with personal lessons learned and thoughts on future thrusts (TQM).

Mathematical calculation skills required for drug administration in undergraduate nursing students to ensure patient safety: A descriptive study: Drug calculation skills in nursing students.

PubMed

Bagnasco, Annamaria; Galaverna, Lucia; Aleo, Giuseppe; Grugnetti, Anna Maria; Rosa, Francesca; Sasso, Loredana

2016-01-01

In the literature we found many studies that confirmed our concerns about nursing students' poor maths skills that directly impact on their ability to correctly calculate drug dosages with very serious consequences for patient safety. The aim of our study was to explore where students had most difficulty and identify appropriate educational interventions to bridge their mathematical knowledge gaps. This was a quali-quantitative descriptive study that included a sample of 726 undergraduate nursing students. We identified exactly where students had most difficulty and identified appropriate educational interventions to bridge their mathematical knowledge gaps. We found that the undergraduate nursing students mainly had difficulty with basic maths principles. Specific learning interventions are needed to improve their basic maths skills and their dosage calculation skills. For this purpose, we identified safeMedicate and eDose (Authentic World Ltd.), only that they are only available in English. In the near future we hope to set up a partnership to work together on the Italian version of these tools. Copyright © 2015 Elsevier Ltd. All rights reserved.

Design of a horizonal liquid helium cryostat for refrigerating a flying superconducting magnet in a wind tunnel

NASA Technical Reports Server (NTRS)

Wu, Y. Y.

1982-01-01

The design of a horizontal liquid helium cryostat for refrigerating a flying superconducting magnet in a wind tunnel is presented. The basic principles of magnetic suspension theory are described and theoretical calculations of the superconducting magnet are provided. The experimental results of the boil-off of liquid nitrogen and liquid helium in the cryostat are reported.

Maternity care and Human Rights: what do women think?

PubMed

Solnes Miltenburg, Andrea; Lambermon, Fleur; Hamelink, Cees; Meguid, Tarek

2016-07-02

A human rights approach to maternal health is considered as a useful framework in international efforts to reduce maternal mortality. Although fundamental human rights principles are incorporated into legal and medical frameworks, human rights have to be translated into measurable actions and outcomes. So far, their substantive applications remain unclear. The aim of this study is to explore women's perspectives and experiences of maternal health services through a human rights perspective in Magu District, Tanzania. This study is a qualitative exploration of perspectives and experiences of women regarding maternity services in government health facilities. The point of departure is a Human Rights perspective. A total of 36 semi-structured interviews were held with 17 women, between the age of 31 and 63, supplemented with one focus group discussion of a selection of the interviewed women, in three rural villages and the town centre in Magu District. Data analysis was performed using a coding scheme based on four human rights principles: dignity, autonomy, equality and safety. Women's experiences of maternal health services reflect several sub-standard care factors relating to violations of multiple human rights principles. Women were aware that substandard care was present and described a range of ways how the services could be delivered that would venerate human rights principles. Prominent themes included: 'being treated well and equal', 'being respected' and 'being given the appropriate information and medical treatment'. Women in this rural Tanzanian setting are aware that their experiences of maternity care reflect violations of their basic rights and are able to voice what basic human rights principles mean to them as well as their desired applications in maternal health service provision.

Mass storage system experiences and future needs at the National Center for Atmospheric Research

NASA Technical Reports Server (NTRS)

Olear, Bernard T.

1992-01-01

This presentation is designed to relate some of the experiences of the Scientific Computing Division at NCAR dealing with the 'data problem'. A brief history and a development of some basic Mass Storage System (MSS) principles are given. An attempt is made to show how these principles apply to the integration of various components into NCAR's MSS. There is discussion of future MSS needs for future computing environments.

Integration of human factors principles in LARG organizations--a conceptual model.

PubMed

Figueira, Sara; Machado, V Cruz; Nunes, Isabel L

2012-01-01

Nowadays many companies are undergoing organizational transformations in order to meet the changing market demands. Thus, in order to become more competitive, supply chains (SC) are adopting new management paradigms to improve SC performance: lean, agile, resilient and green (LARG paradigms). The implementation of new production paradigms demands particular care with the issues related with Human Factors to avoid health and safety problems to workers and losses to companies. Thus, the successful introduction of these new production paradigms depends among others on a Human Factors oriented approach. This work presents a conceptual framework that allows integrating ergonomic and safety design principles during the different implementation phases of lean, agile, resilient and green practices.

First-order reliability application and verification methods for semistatic structures

NASA Astrophysics Data System (ADS)

Verderaime, V.

1994-11-01

Escalating risks of aerostructures stimulated by increasing size, complexity, and cost should no longer be ignored in conventional deterministic safety design methods. The deterministic pass-fail concept is incompatible with probability and risk assessments; stress audits are shown to be arbitrary and incomplete, and the concept compromises the performance of high-strength materials. A reliability method is proposed that combines first-order reliability principles with deterministic design variables and conventional test techniques to surmount current deterministic stress design and audit deficiencies. Accumulative and propagation design uncertainty errors are defined and appropriately implemented into the classical safety-index expression. The application is reduced to solving for a design factor that satisfies the specified reliability and compensates for uncertainty errors, and then using this design factor as, and instead of, the conventional safety factor in stress analyses. The resulting method is consistent with current analytical skills and verification practices, the culture of most designers, and the development of semistatic structural designs.

Mutual interferences and design principles for mechatronic devices in magnetic resonance imaging.

PubMed

Yu, Ningbo; Gassert, Roger; Riener, Robert

2011-07-01

Robotic and mechatronic devices that work compatibly with magnetic resonance imaging (MRI) are applied in diagnostic MRI, image-guided surgery, neurorehabilitation and neuroscience. MRI-compatible mechatronic systems must address the challenges imposed by the scanner's electromagnetic fields. We have developed objective quantitative evaluation criteria for device characteristics needed to formulate design guidelines that ensure MRI-compatibility based on safety, device functionality and image quality. The mutual interferences between an MRI system and mechatronic devices working in its vicinity are modeled and tested. For each interference, the involved components are listed, and a numerical measure for "MRI-compatibility" is proposed. These interferences are categorized into an MRI-compatibility matrix, with each element representing possible interactions between one part of the mechatronic system and one component of the electromagnetic fields. Based on this formulation, design principles for MRI-compatible mechatronic systems are proposed. Furthermore, test methods are developed to examine whether a mechatronic device indeed works without interferences within an MRI system. Finally, the proposed MRI-compatibility criteria and design guidelines have been applied to an actual design process that has been validated by the test procedures. Objective and quantitative MRI-compatibility measures for mechatronic and robotic devices have been established. Applying the proposed design principles, potential problems in safety, device functionality and image quality can be considered in the design phase to ensure that the mechatronic system will fulfill the MRI-compatibility criteria. New guidelines and test procedures for MRI instrument compatibility provide a rational basis for design and evaluation of mechatronic devices in various MRI applications. Designers can apply these criteria and use the tests, so that MRI-compatibility results can accrue to build an experiential database.

Automotive Power Trains.

ERIC Educational Resources Information Center

Marine Corps Inst., Washington, DC.

This correspondence course, originally developed for the Marine Corps, is designed to provide mechanics with an understanding of the operation, maintenance, and troubleshooting of automotive power trains and certain auxiliary equipment. The course contains six study units covering basic power trains; clutch principles and operations; conventional…

Modelling and Simulation in the Design Process of Armored Vehicles

DTIC Science & Technology

2003-03-01

trackway conditions is a demanding optimization task. Basically, a high level of ride comfort requires soft suspension tuning, whereas driving safety relies...The maximum off-road speed is generally limited by traction, input torque, driving safety and ride comfort. When obstacles are to be negotiated, the...wheel travel was defined during the mobility simulation runs. Figure 14: Ramp 1.5m at 40 kph; virtual and physical prototype Driving safety and ride

The basics of animal biosafety and biocontainment training.

PubMed

Pritt, Stacy; Hankenson, F Claire; Wagner, Ted; Tate, Mallory

2007-06-01

The threat of biocontamination in an animal facility is best subdued by training. 'Training' is an ambiguous designation that may not be adequately appreciated in all animal facilities. The authors set down concrete training topics and provide practical advice on incorporating the basic principles of facility biosafety training--as well as the precautions and procedures that employees must know in case of accident or emergency--into various training models. They also discuss the current biosafety publications and guidelines and their relationship to biosafety training.

Good Practice Recommendations in the Field of Heating, Ventilation, and Air Conditioning for Health Related Research Laboratories.

ERIC Educational Resources Information Center

Laboratory Design Notes, 1966

1966-01-01

A collection of laboratory design notes to set forth minimum criteria required in the design of basic medical research laboratory buildings. Recommendations contained are primarily concerned with features of design which affect quality of performance and future flexibility of facility systems. Subjects of economy and safety are discussed where…

5 CFR 551.401 - Basic principles.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Basic principles. 551.401 Section 551.401 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION UNDER THE FAIR LABOR STANDARDS ACT Hours of Work General Provisions § 551.401 Basic principles. (a) All time...

A Large-Scale Evaluation of an Intelligent Discovery World: Smithtown.

ERIC Educational Resources Information Center

Shute, Valerie J.; Glaser, Robert

1990-01-01

Presents an evaluation of "Smithtown," an intelligent tutoring system designed to teach inductive inquiry skills and principles of basic microeconomics. Two studies of individual differences in learning are described, including a comparison of knowledge acquisition with traditional instruction; hypotheses tested are discussed; and the…

Planning and Producing Audiovisual Materials.

ERIC Educational Resources Information Center

Kemp, Jerrold E.

The first few chapters of this book are devoted to an examination of the changing character of audiovisual materials; instructional design and the selection of media to serve specific objectives; and principles of perception, communication, and learning. Relevant research findings in the field are reviewed. The basic techniques of planning…

The Translation of Basic Behavioral Research to School Psychology: A Citation Analysis

ERIC Educational Resources Information Center

Reed, Derek D.

2008-01-01

In recent years, school psychology has become increasingly grounded in data-based decision making and intervention design, based upon behavior analytic principles. This paradigm shift has occurred in part by recent federal legislation, as well as through advances in experimental research replicating laboratory based studies. Translating basic…

Online Lectures in Undergraduate Medical Education: Scoping Review

PubMed Central

Tang, Brandon; Coret, Alon; Qureshi, Aatif; Barron, Henry; Ayala, Ana Patricia

2018-01-01

Background The adoption of the flipped classroom in undergraduate medical education calls on students to learn from various self-paced tools—including online lectures—before attending in-class sessions. Hence, the design of online lectures merits special attention, given that applying multimedia design principles has been shown to enhance learning outcomes. Objective The aim of this study was to understand how online lectures have been integrated into medical school curricula, and whether published literature employs well-accepted principles of multimedia design. Methods This scoping review followed the methodology outlined by Arksey and O'Malley (2005). Databases, including MEDLINE, PsycINFO, Education Source, FRANCIS, ERIC, and ProQuest, were searched to find articles from 2006 to 2016 related to online lecture use in undergraduate medical education. Results In total, 45 articles met our inclusion criteria. Online lectures were used in preclinical and clinical years, covering basic sciences, clinical medicine, and clinical skills. The use of multimedia design principles was seldom reported. Almost all studies described high student satisfaction and improvement on knowledge tests following online lecture use. Conclusions Integration of online lectures into undergraduate medical education is well-received by students and appears to improve learning outcomes. Future studies should apply established multimedia design principles to the development of online lectures to maximize their educational potential. PMID:29636322

THE DEVELOPMENT AND TESTING OF AN EXPERIMENTAL POLYSENSORY SELF-INSTRUCTIONAL SYSTEM DESIGNED TO HELP STUDENTS ACQUIRE BASIC ELECTRICAL OCCUPATIONAL COMPETENCIES. FINAL REPORT NO. 19.

ERIC Educational Resources Information Center

HILL, EDWIN K.

AN EXPERIMENTAL POLYSENSORY SELF-INSTRUCTIONAL SYSTEM DESIGNED TO ASSIST STUDENTS IN ACQUIRING AND APPLYING KNOWLEDGE OF THE NATURE, CONVERSION, AND TRANSMISSION OF ELECTRICAL ENERGY AND OF PRINCIPLES OF SIMPLE EELECTRICAL CIRCUITS WAS DEVELOPED AND TESTED FOR EFFECTIVENESS. RELATED LABORATORY EXERCISES WERE AN INTEGRAL PART OF THE SYSTEM WHICH…

Social Transformation and "Popular Schooling" in Brazil.

ERIC Educational Resources Information Center

Rossatto, Cesar Augusto

2001-01-01

Describes three school programs designed to provide alternative schooling for Brazilian street children and illiterate adult students with the basic skills to survive in their world. Directly or indirectly embedded in Freirean principles, the three programs are: (1) Sao Paulo Interdisciplinary School Reform; (2) Projeto Axe: Schooling for Street…

Using Adult Learning Principles in Adult Basic and Literacy Education. Practice Application Brief.

ERIC Educational Resources Information Center

Imel, Susan

Adult basic and literacy education (ABLE) is a complex undertaking that serves diverse learners with a variety of needs. Although no definitive list of adult education principles exists in the literature, the following principles have been identified in multiple sources devoted to principles of effective adult education: involve learners in…

Measuring Accurately Single-Phase Sinusoidal and Non-Sinusoidal Power.

DTIC Science & Technology

1983-01-01

current component. Since the induction watthour meter is designed for measuring ac variations only, the creation of a dc component in an ac circuit due...available and the basic principle of measurement used in each. 3.1 Power Measuring Meters Instruments designed to measure the amount of average power...1.0 percent of full scale and + 0.5% of reading. 3.2 Encrgy Measuring Meters Instruments designed to measure the amount of power consumed in a circuit

A Nuclear Reactions Primer with Computers.

ERIC Educational Resources Information Center

Calle, Carlos I.; Roach, Jennifer A.

1987-01-01

Described is a microcomputer software program NUCLEAR REACTIONS designed for college level students and in use at Sweet Briar College (Sweet Briar, VA). The program is written in Microsoft Basic Version 2.1 for the Apple Macintosh Microcomputer. It introduces two conservation principles: (1) conservation of charge; and (2) conservation of nucleon…

Orientation to Health Occupations: Curriculum Guide for Health Occupations, Phase 2.

ERIC Educational Resources Information Center

Benedict, Mary; And Others

The document outlines a curriculum designed to teach appropriate nursing skills to students and to prepare them for career opportunities available in health occupations. It is presented in 10 units offering basic information under the headings of: overview of health occupations; communications; medical terminology; fundamental principles of human…

Problems in Choosing Tools and Methods for Teaching Programming

ERIC Educational Resources Information Center

Vitkute-Adžgauskiene, Davia; Vidžiunas, Antanas

2012-01-01

The paper analyses the problems in selecting and integrating tools for delivering basic programming knowledge at the university level. Discussion and analysis of teaching the programming disciplines, the main principles of study programme design, requirements for teaching tools, methods and corresponding languages is presented, based on literature…

Program of Studies. Instructional Goals and Objectives: Art.

ERIC Educational Resources Information Center

West Virginia State Dept. of Education, Charleston.

Instructional goals and sample instructional objectives for art education in West Virginia's public schools are outlined. A comprehensive arts education program is basic to the general education of every child. Two guiding principles directed the programs' design. First, each student should have opportunities to acquire skills in the four…

Principles and Applications of Physical Fitness: Course Proposal.

ERIC Educational Resources Information Center

Yeo, David G.

A proposal is presented for a Community College of Philadelphia Life Sciences and Allied Health Services course in physical fitness. Following a standard cover form, a statement of purpose explains that the course is designed to provide instruction and experience in the basic areas of nutrition and physical conditioning, including dietary…

OCCUPATIONS FOR YOU, PART ONE.

ERIC Educational Resources Information Center

DES ROCHES, DEAN L.

DEVELOPED AS PART OF A CURRICULUM PROJECT DESCRIBED IN VT 004 454 TO HELP YOUNG PEOPLE LEARN BASIC PRINCIPLES AND CONCEPTS OF MECHANICS AND TECHNOLOGY, THIS BOOK WAS DESIGNED TO STIMULATE INTEREST AND ANSWER QUESTIONS ABOUT VOCATIONAL CHOICE, STIMULATE INTEREST IN READING, AND PROVIDE CONTENT TO RELATE TO ACADEMIC STUDY. THE MATERIALS DEVELOPED IN…

Nursing/LVN Course. Bilingual Vocational Instructional Materials.

ERIC Educational Resources Information Center

Lopez-Cox, Guadalupe

This course in licensed vocational nursing, one of a series of bilingual English-Spanish vocational education courses, is designed to teach basic nursing principles needed by nurses' aides to do nursing procedures and skills in the different health care institutions. It covers many areas, including the following: the health care system, personal…

Active magnetic radiation shielding system analysis and key technologies.

PubMed

Washburn, S A; Blattnig, S R; Singleterry, R C; Westover, S C

2015-01-01

Many active magnetic shielding designs have been proposed in order to reduce the radiation exposure received by astronauts on long duration, deep space missions. While these designs are promising, they pose significant engineering challenges. This work presents a survey of the major systems required for such unconfined magnetic field design, allowing the identification of key technologies for future development. Basic mass calculations are developed for each system and are used to determine the resulting galactic cosmic radiation exposure for a generic solenoid design, using a range of magnetic field strength and thickness values, allowing some of the basic characteristics of such a design to be observed. This study focuses on a solenoid shaped, active magnetic shield design; however, many of the principles discussed are applicable regardless of the exact design configuration, particularly the key technologies cited. Copyright © 2015 The Committee on Space Research (COSPAR). All rights reserved.

The Utility of Single Subject Design Research

ERIC Educational Resources Information Center

Bennett, Kyle D.

2016-01-01

Single subject design (SSD) research is a quantitative approach used to investigate basic and applied research questions. It has been used for decades to examine issues of social importance such as those related to general and special education strategies, therapeutic approaches in mental health, community health practices, safety, and business…

The Penny Principle.

ERIC Educational Resources Information Center

Farnsworth, Briant J.; Dunoskovic, Janice H.

1980-01-01

Granite School District, Salt Lake City, Utah, has developed an elementary consumer education program designed for infusion into regular subject matter teaching. This article presents goals and starter activities from each of the project's eight topic areas: money management, income determination, basic economics, advertising, purchasing, energy,…

Active-comparator design and new-user design in observational studies

PubMed Central

Yoshida, Kazuki; Solomon, Daniel H.; Kim, Seoyoung C.

2015-01-01

SUMMARY Over the past decade, an increasing number of observational studies have examined the effectiveness or safety of rheumatoid arthritis treatments. However, unlike randomized controlled trials (RCTs), observational studies of drug effects face methodological challenges including confounding by indication. Two design principles - active comparator design and new user design can help mitigate such challenges in observational studies. To improve validity of study findings, observational studies should be designed in such a way that makes them more closely approximate RCTs. The active comparator design compares the drug of interest to another commonly used agent for the same indication, rather than a ‘non-user’ group. This principle helps select treatment groups similar in treatment indications (both measured and unmeasured characteristics). The new user design includes a cohort of patients from the time of treatment initiation, so that it can assess patients’ pretreatment characteristics and capture all events occurring anytime during follow-up. PMID:25800216

Mental Models and Cooperative Problem Solving with Expert Systems,

DTIC Science & Technology

1984-09-01

THIS PAGE ( "o Do le Entera) READINSTRUCTION- REPORT DOCUMENTATION PAGE BRE COMPLETING FORM I. REPORT NUMBER 2. GOVT ACCESSION NO- I. RECIPIENT’S CATALOG...the user’s con- ceptual understanding of the basic principle of the system s problem solving processes. An experimental study is described that strongly...design :A principles that lead to the optimal user engineering of future expert systems. The central theory discussed below is that the nature of the

Spaceborne receivers: Basic principles

NASA Technical Reports Server (NTRS)

Stacey, J. M.

1984-01-01

The underlying principles of operation of microwave receivers for space observations of planetary surfaces were examined. The design philosophy of the receiver as it is applied to operate functionally as an efficient receiving system, the principle of operation of the key components of the receiver, and the important differences among receiver types are explained. The operating performance and the sensitivity expectations for both the modulated and total power receiver configurations are outlined. The expressions are derived from first principles and are developed through the important intermediate stages to form practicle and easily applied equations. The transfer of thermodynamic energy from point to point within the receiver is illustrated. The language of microwave receivers is applied statistics.

Achieving integration in mixed methods designs-principles and practices.

PubMed

Fetters, Michael D; Curry, Leslie A; Creswell, John W

2013-12-01

Mixed methods research offers powerful tools for investigating complex processes and systems in health and health care. This article describes integration principles and practices at three levels in mixed methods research and provides illustrative examples. Integration at the study design level occurs through three basic mixed method designs-exploratory sequential, explanatory sequential, and convergent-and through four advanced frameworks-multistage, intervention, case study, and participatory. Integration at the methods level occurs through four approaches. In connecting, one database links to the other through sampling. With building, one database informs the data collection approach of the other. When merging, the two databases are brought together for analysis. With embedding, data collection and analysis link at multiple points. Integration at the interpretation and reporting level occurs through narrative, data transformation, and joint display. The fit of integration describes the extent the qualitative and quantitative findings cohere. Understanding these principles and practices of integration can help health services researchers leverage the strengths of mixed methods. © Health Research and Educational Trust.

Marketing and Advertising: Procter & Gamble Insights into Economics.

ERIC Educational Resources Information Center

Reinke, Robert; And Others

Featuring real-life examples that show economic principles at work, this document contains teaching units which are designed to supplement basic economics and consumer education textbooks in social studies, home economics, and business education classes. Written for grades 9-12, and adaptable for grades 7-8, the materials bring economic principles…

The Nervous System Game

ERIC Educational Resources Information Center

Corbitt, Cynthia; Carpenter, Molly

2006-01-01

For many children, especially those with reading difficulties, a motor-kinesthetic learning activity may be an effective tool to teach complex concepts. With this in mind, the authors developed and tested a game designed to teach fourth- to sixth-grade children some basic principles of nervous system function by allowing the children themselves to…

Individual Differences in Learning from an Intelligent Discovery World: Smithtown.

ERIC Educational Resources Information Center

Shute, Valerie J.

"Smithtown" is an intelligent computer program designed to enhance an individual's scientific inquiry skills as well as to provide an environment for learning principles of basic microeconomics. It was hypothesized that intelligent computer instruction on applying effective interrogative skills (e.g., changing one variable at a time…

Training Manual for Human Service Risk Managers. Final Report.

ERIC Educational Resources Information Center

Davis, Frank W.; And Others

This manual is designed to educate human service agency management personnel involved in transportation about basic risk management principles and insurance issues. Chapter I illustrates the liability factors that create the insurance and risk management needs. Both legal and humanitarian obligations of human service agencies involved in…

40 CFR 62.15120 - What information must I include in the plant-specific operating manual?

Code of Federal Regulations, 2013 CFR

2013-07-01

... startup, shutdown, and malfunction of the municipal waste combustion unit. (e) Procedures for maintaining... DESIGNATED FACILITIES AND POLLUTANTS Federal Plan Requirements for Small Municipal Waste Combustion Units... the basic combustion principles that apply to municipal waste combustion units. (c) Procedures for...

Seeing is believing: good graphic design principles for medical research.

PubMed

Duke, Susan P; Bancken, Fabrice; Crowe, Brenda; Soukup, Mat; Botsis, Taxiarchis; Forshee, Richard

2015-09-30

Have you noticed when you browse a book, journal, study report, or product label how your eye is drawn to figures more than to words and tables? Statistical graphs are powerful ways to transparently and succinctly communicate the key points of medical research. Furthermore, the graphic design itself adds to the clarity of the messages in the data. The goal of this paper is to provide a mechanism for selecting the appropriate graph to thoughtfully construct quality deliverables using good graphic design principles. Examples are motivated by the efforts of a Safety Graphics Working Group that consisted of scientists from the pharmaceutical industry, Food and Drug Administration, and academic institutions. Copyright © 2015 John Wiley & Sons, Ltd.

An assessment of adherence to basic ecological principles by payments for ecosystem service projects.

PubMed

Prager, C M; Varga, A; Olmsted, P; Ingram, J C; Cattau, M; Freund, C; Wynn-Grant, R; Naeem, S

2016-08-01

Programs and projects employing payments for ecosystem service (PES) interventions achieve their objectives by linking buyers and sellers of ecosystem services. Although PES projects are popular conservation and development interventions, little is known about their adherence to basic ecological principles. We conducted a quantitative assessment of the degree to which a global set of PES projects adhered to four ecological principles that are basic scientific considerations for any project focused on ecosystem management: collection of baseline data, identification of threats to an ecosystem service, monitoring, and attention to ecosystem dynamics or the formation of an adaptive management plan. We evaluated 118 PES projects in three markets-biodiversity, carbon, and water-compiled using websites of major conservation organizations; ecology, economic, and climate-change databases; and three scholarly databases (ISI Web of Knowledge, Web of Science, and Google Scholar). To assess adherence to ecological principles, we constructed two scientific indices (one additive [ASI] and one multiplicative [MSI]) based on our four ecological criteria and analyzed index scores by relevant project characteristics (e.g., sector, buyer, seller). Carbon-sector projects had higher ASI values (P < 0.05) than water-sector projects and marginally higher ASI scores (P < 0.1) than biodiversity-sector projects, demonstrating their greater adherence to ecological principles. Projects financed by public-private partnerships had significantly higher ASI values than projects financed by governments (P < 0.05) and marginally higher ASI values than those funded by private entities (P < 0.1). We did not detect differences in adherence to ecological principles based on the inclusion of cobenefits, the spatial extent of a project, or the size of a project's budget. These findings suggest, at this critical phase in the rapid growth of PES projects, that fundamental ecological principles should be considered more carefully in PES project design and implementation in an effort to ensure PES project viability and sustainability. © 2015 Society for Conservation Biology.

Photoelectroconversion by Semiconductors: A Physical Chemistry Experiment.

ERIC Educational Resources Information Center

Fan, Qinbai; And Others

1995-01-01

Presents an experiment designed to give students some experience with photochemistry, electrochemistry, and basic theories about semiconductors. Uses a liquid-junction solar cell and illustrates some fundamental physical and chemical principles related to light and electricity interconversion as well as the properties of semiconductors. (JRH)

40 CFR 60.53c - Operator training and qualification requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and types of emissions; (ii) Basic combustion principles, including products of combustion; (iii) Operation of the type of incinerator to be used by the operator, including proper startup, waste charging... procedures; (xii) Pre-startup inspections; and (xiii) Recordkeeping requirements. (2) An examination designed...

40 CFR 60.53c - Operator training and qualification requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and types of emissions; (ii) Basic combustion principles, including products of combustion; (iii) Operation of the type of incinerator to be used by the operator, including proper startup, waste charging... procedures; (xii) Pre-startup inspections; and (xiii) Recordkeeping requirements. (2) An examination designed...

Teaching Reprint File Management: Basic Principles and Software Programs.

ERIC Educational Resources Information Center

Wood, Elizabeth H.

1989-01-01

Describes a workshop for teaching library users how to manage reprint files which was developed at the University of Southern California Norris Medical Library. Software programs designed for this purpose are suggested, and a sidebar lists software features to consider. (eight references) (MES)

49 CFR 236.1015 - PTC Safety Plan content requirements and PTC System Certification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... established and can maintain a quality control system for PTC system design and manufacturing acceptable to... an explanation of the design principles and assumptions; (3) A risk assessment of the as-built PTC... the specific procedures and test equipment necessary to ensure the safe and proper installation...

Sociotechnical attributes of safe and unsafe work systems.

PubMed

Kleiner, Brian M; Hettinger, Lawrence J; DeJoy, David M; Huang, Yuang-Hsiang; Love, Peter E D

2015-01-01

Theoretical and practical approaches to safety based on sociotechnical systems principles place heavy emphasis on the intersections between social-organisational and technical-work process factors. Within this perspective, work system design emphasises factors such as the joint optimisation of social and technical processes, a focus on reliable human-system performance and safety metrics as design and analysis criteria, the maintenance of a realistic and consistent set of safety objectives and policies, and regular access to the expertise and input of workers. We discuss three current approaches to the analysis and design of complex sociotechnical systems: human-systems integration, macroergonomics and safety climate. Each approach emphasises key sociotechnical systems themes, and each prescribes a more holistic perspective on work systems than do traditional theories and methods. We contrast these perspectives with historical precedents such as system safety and traditional human factors and ergonomics, and describe potential future directions for their application in research and practice. The identification of factors that can reliably distinguish between safe and unsafe work systems is an important concern for ergonomists and other safety professionals. This paper presents a variety of sociotechnical systems perspectives on intersections between social--organisational and technology--work process factors as they impact work system analysis, design and operation.

Conference Proceedings on Validation of Computational Fluid Dynamics. Volume 2. Poster Papers Held in Lisbon, Portugal on 2-5 May 1988

DTIC Science & Technology

1988-05-01

ifforiable manpower investement. On the basis of our current experience it seems that the basic design principles are valid. The system developed will... system is operational on various computer networks, and in both industrial and in research environments. The design pri,lciples for the construction of...to a useful numerical simulation and design system for very complex configurations and flows. 7. REFERENCES 1. Bartlett G. W. , "An experimental

Technical Guidance from the International Safety Framework for Nuclear Power Source Applications in Outer Space for Design and Development Phases

NASA Astrophysics Data System (ADS)

Summerer, Leopold

2014-08-01

In 2009, the International Safety Framework for Nuclear Power Source Applications in Outer Space [1] has been adopted, following a multi-year process that involved all major space faring nations in the frame of the International Atomic Energy Agency and the UN Committee on the Peaceful Uses of Outer Space. The safety framework reflects an international consensus on best practices. After the older 1992 Principles Relevant to the Use of Nuclear Power Sources in Outer Space, it is the second document at UN level dedicated entirely to space nuclear power sources.This paper analyses aspects of the safety framework relevant for the design and development phases of space nuclear power sources. While early publications have started analysing the legal aspects of the safety framework, its technical guidance has not yet been subject to scholarly articles. The present paper therefore focuses on the technical guidance provided in the safety framework, in an attempt to assist engineers and practitioners to benefit from these.

Basic Knowledge for Market Principle: Approaches to the Price Coordination Mechanism by Using Optimization Theory and Algorithm

NASA Astrophysics Data System (ADS)

Aiyoshi, Eitaro; Masuda, Kazuaki

On the basis of market fundamentalism, new types of social systems with the market mechanism such as electricity trading markets and carbon dioxide (CO2) emission trading markets have been developed. However, there are few textbooks in science and technology which present the explanation that Lagrange multipliers can be interpreted as market prices. This tutorial paper explains that (1) the steepest descent method for dual problems in optimization, and (2) Gauss-Seidel method for solving the stationary conditions of Lagrange problems with market principles, can formulate the mechanism of market pricing, which works even in the information-oriented modern society. The authors expect readers to acquire basic knowledge on optimization theory and algorithms related to economics and to utilize them for designing the mechanism of more complicated markets.

Display formats manual

NASA Technical Reports Server (NTRS)

Runnels, R. L.

1973-01-01

The standards and procedures for the generation of operational display formats to be used in the Mission Control Center (MCC) display control system are presented. The required effort, forms, and fundamentals for the design, specifications, and production of display formats are identified. The principles of display design and system constraints controlling the creation of optimum operational displays for mission control are explained. The basic two types of MCC display systems for presenting information are described.

10 Tips to Reduce Your Chance of Losing Vision from the Most Common Cause of Blindness

MedlinePlus

... 2019 Basic and Clinical Science Course, Section 02: Fundamentals and Principles of Ophthalmology 2018-2019 Basic and ... 2019 Basic and Clinical Science Course, Section 02: Fundamentals and Principles of Ophthalmology Print 2018-2019 Basic ...

Magnetic circuit modifications in resonant vibration harvesters

NASA Astrophysics Data System (ADS)

Szabo, Zoltan; Fiala, Pavel; Dohnal, Premysl

2018-01-01

The paper discusses the conclusions obtained from a research centered on a vibration-powered milli- or micro generator (MG) operating as a harvester to yield the maximum amount of energy transferred by the vibration of an independent system. The investigation expands on the results proposed within papers that theoretically define the properties characterizing the basic configurations of a generator based on applied Faraday's law of induction. We compared two basic principles of circuit closing in a magnetic circuit that, fully or partially, utilizes a ferromagnetic material, and a large number of generator design solutions were examined and tested. In the given context, the article brings a compact survey of the rules facilitating energy transformation and the designing of harvesters.

Intimate partner violence in the family: considerations for children's safety.

PubMed

MacMillan, Harriet L; Wathen, C Nadine; Varcoe, Colleen M

2013-12-01

Children's exposure to intimate partner violence (IPV) is increasingly recognized as a type of child maltreatment that has a level of impairment similar to other types of abuse and neglect. Despite advances in the area of IPV, the safety planning strategies recommended as part of the overall response to IPV need to be examined in terms of their implications for children. This article discusses these strategies within the context of child safety, comparing IPV safety planning with approaches aimed at reducing exposure to other types of violence such as child sexual abuse, as well as general child safety strategies. Despite the emphasis on safety planning in information available on responding to IPV, the actual effectiveness of such planning in improving safety and reducing violence is unknown. Safety planning provided to children by a parent experiencing IPV, especially when IPV is ongoing and not recognized by anyone outside the home, may lead to confusing messages for children, particularly if there is an emphasis on secrecy. While awaiting evidence about the effectiveness of specific safety planning strategies for children, we suggest basic principles and general strategies that emphasize universality in terms of education about any type of violence or abuse in the home being unacceptable, as well as the need to focus on safety in general. Copyright © 2013 Elsevier Ltd. All rights reserved.

The role of language in mathematical development: evidence from children with specific language impairments.

PubMed

Donlan, Chris; Cowan, Richard; Newton, Elizabeth J; Lloyd, Delyth

2007-04-01

A sample (n=48) of eight-year-olds with specific language impairments is compared with age-matched (n=55) and language matched controls (n=55) on a range of tasks designed to test the interdependence of language and mathematical development. Performance across tasks varies substantially in the SLI group, showing profound deficits in production of the count word sequence and basic calculation and significant deficits in understanding of the place-value principle in Hindu-Arabic notation. Only in understanding of arithmetic principles does SLI performance approximate that of age-matched-controls, indicating that principled understanding can develop even where number sequence production and other aspects of number processing are severely compromised.

Developing a patient-led electronic feedback system for quality and safety within Renal PatientView.

PubMed

Giles, Sally J; Reynolds, Caroline; Heyhoe, Jane; Armitage, Gerry

2017-03-01

It is increasingly acknowledged that patients can provide direct feedback about the quality and safety of their care through patient reporting systems. The aim of this study was to explore the feasibility of patients, healthcare professionals and researchers working in partnership to develop a patient-led quality and safety feedback system within an existing electronic health record (EHR), known as Renal PatientView (RPV). Phase 1 (inception) involved focus groups (n = 9) and phase 2 (requirements) involved cognitive walkthroughs (n = 34) and 1:1 qualitative interviews (n = 34) with patients and healthcare professionals. A Joint Services Expert Panel (JSP) was convened to review the findings from phase 1 and agree the core principles and components of the system prototype. Phase 1 data were analysed using a thematic approach. Data from phase 1 were used to inform the design of the initial system prototype. Phase 2 data were analysed using the components of heuristic evaluation, resulting in a list of core principles and components for the final system prototype. Phase 1 identified four main barriers and facilitators to patients feeding back on quality and safety concerns. In phase 2, the JSP agreed that the system should be based on seven core principles and components. Stakeholders were able to work together to identify core principles and components for an electronic patient quality and safety feedback system in renal services. Tensions arose due to competing priorities, particularly around anonymity and feedback. Careful consideration should be given to the feasibility of integrating a novel element with differing priorities into an established system with existing functions and objectives. © 2016 European Dialysis and Transplant Nurses Association/European Renal Care Association.

Analysis of older driver safety interventions : a human factors taxonomic approach

DOT National Transportation Integrated Search

1999-03-01

The careful application of human factors design principles and guidelines is integral to : the development of safe, efficient and usable Intelligent Transportation Systems (ITS). One : segment of the driving population that may significantly benefit ...

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 1: Reference Design Document (RDD)

NASA Technical Reports Server (NTRS)

1972-01-01

The Reference Design Document, of the Preliminary Safety Analysis Report (PSAR) - Reactor System provides the basic design and operations data used in the nuclear safety analysis of the Rector Power Module as applied to a Space Base program. A description of the power module systems, facilities, launch vehicle and mission operations, as defined in NASA Phase A Space Base studies is included. Each of two Zirconium Hydride Reactor Brayton power modules provides 50 kWe for the nominal 50 man Space Base. The INT-21 is the prime launch vehicle. Resupply to the 500 km orbit over the ten year mission is provided by the Space Shuttle. At the end of the power module lifetime (nominally five years), a reactor disposal system is deployed for boost into a 990 km high altitude (long decay time) earth orbit.

Prevention through pre-review in occupational health and safety.

PubMed Central

Richter, E D; Kretzmer, D

1980-01-01

Occupational health problems have needlessly been produced at many worksites as a consequence of their not having been anticipated during design and construction. Pre-review may be an effective and efficient mechanism for preventive intervention in occupational health and safety. Legal and administrative precedents are cited from the United States and other countries. Proposals are presented, with Israel as an example, which aim to implement the principle of pre-review. PMID:7352610

Secondary School Students' Conceptual Understanding of Physical and Chemical Changes

ERIC Educational Resources Information Center

Hanson, R.; Twumasi, A. K.; Aryeetey, C.; Sam, A.; Adukpo, G.

2016-01-01

In recent years, researchers have shown an interest in understanding students' own ideas about basic chemical principles and guiding them through innovative ways to gain conceptual understanding where necessary. This research was a case study designed to assess 50 first year high school students' conceptual understanding about changes in matter,…

Gas Tungsten Arc Welding. Welding Module 6. Instructor's Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This guide is intended to assist vocational educators in teaching a three-unit module in gas tungsten arc welding. The module has been designed to be totally integrated with Missouri's Vocational Instruction Management System. The basic principles involved in gas tungsten arc welding, supplies, and applications are covered. The materials included…

Corpus-Based Approaches to Language Description for Specialized Academic Writing

ERIC Educational Resources Information Center

Flowerdew, John

2017-01-01

Language description is a fundamental requirement for second language (L2) syllabus design. The greatest advances in language description in recent decades have been done with the help of electronic corpora. Such language description is the theme of this article. The article first introduces some basic concepts and principles in corpus research.…

The Bernese Program against Victimization in Kindergarten and Elementary School

ERIC Educational Resources Information Center

Alsaker, Francoise D.; Valkanover, Stefan

2012-01-01

The Bernese Program against Victimization in Kindergarten and Elementary School was designed to be adaptable to the very different situations and needs encountered by teachers in kindergarten and elementary school. The basic principle of the program is to enhance teachers' ability to address bullying. The program consists of six modules, each…

Justicia = Justice. Level II. Student Book and Teacher's Edition.

ERIC Educational Resources Information Center

Center for Civic Education, Calabasas, CA.

This curriculum is designed to help students understand and apply basic principles and considerations useful in examining issues of justice so they can determine for themselves what would be just in a particular situation. From such activities, students should gain an increased awareness of the importance of justice in their own lives and its…

Behavior Management Strategies for Teachers. A Student Workbook. 2nd Edition.

ERIC Educational Resources Information Center

Harlan, Joan C.; Rowland, Sidney T.

This student workbook is designed to accompany the textbook, "Behavior Management Strategies for Teachers," helping to reinforce understanding of the basic principles described in the companion textbook. It presents a summary of the key concepts in each of the workbook's 15 chapters. Questions in this student workbook are based on each…

School-Based Management and Accountability Procedures Manual

ERIC Educational Resources Information Center

North Carolina Department of Public Instruction, 2004

2004-01-01

From the mission, several principles were developed to guide the School-Based Management and Accountability Program (the ABCs). (1) The ABCs sets standards for student performance and growth in the basics that are the foundation for further learning and achievement; (2) The accountability system in the ABCs plan is designed to result in improved…

A Is for Assessment: The Other Scarlet Letter

ERIC Educational Resources Information Center

Halpern, Diane F.

2013-01-01

This is a personalized review of programs designed to assess student learning outcomes (SLOs) in higher education. In the last 30+ years, there have been few changes in the basic principles and premises. We assess SLOs for the purpose of improving teaching and learning. Although content area knowledge is important, other goals such as enhancing…

An interagency space nuclear propulsion safety policy for SEI - Issues and discussion

NASA Technical Reports Server (NTRS)

Marshall, A. C.; Sawyer, J. C., Jr.

1991-01-01

An interagency Nuclear Safety Policy Working Group (NSPWG) was chartered to recommend nuclear safety policy, requirements, and guidelines for the Space Exploration Initiative nuclear propulsion program to facilitate the implementation of mission planning and conceptual design studies. The NSPWG developed a top level policy to provide the guiding principles for the development and implementation of the nuclear propulsion safety program and the development of Safety Functional Requirements. In addition, the NSPWG reviewed safety issues for nuclear propulsion and recommended top level safety requirements and guidelines to address these issues. Safety topics include reactor start-up, inadvertent criticality, radiological release and exposure, disposal, entry, safeguards, risk/reliability, operational safety, ground testing, and other considerations. In this paper the emphasis is placed on the safety policy and the issues and considerations that are addressed by the NSPWG recommendations.

NSPWG-recommended safety requirements and guidelines for SEI nuclear propulsion

NASA Technical Reports Server (NTRS)

Marshall, Albert C.; Sawyer, J. C., Jr.; Bari, Robert A.; Brown, Neil W.; Cullingford, Hatice S.; Hardy, Alva C.; Lee, James H.; Mcculloch, William H.; Niederauer, George F.; Remp, Kerry

1992-01-01

An interagency Nuclear Safety Policy Working Group (NSPWG) was chartered to recommend nuclear safety policy, requirements, and guidelines for the Space Exploration Initiative (SEI) nuclear propulsion program to facilitate the implementation of mission planning and conceptual design studies. The NSPWG developed a top-level policy to provide the guiding principles for the development and implementation of the nuclear propulsion safety program and the development of safety functional requirements. In addition, the NSPWG reviewed safety issues for nuclear propulsion and recommended top-level safety requirements and guidelines to address these issues. Safety requirements were developed for reactor start-up, inadvertent criticality, radiological release and exposure, disposal, entry, and safeguards. Guidelines were recommended for risk/reliability, operational safety, flight trajectory and mission abort, space debris and meteoroids, and ground test safety. In this paper the specific requirements and guidelines will be discussed.

Operational health physics training

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1992-06-01

The initial four sections treat basic information concerning atomic structure and other useful physical quantities, natural radioactivity, the properties of {alpha}, {beta}, {gamma}, x rays and neutrons, and the concepts and units of radiation dosimetry (including SI units). Section 5 deals with biological effects and the risks associated with radiation exposure. Background radiation and man-made sources are discussed next. The basic recommendations of the ICRP concerning dose limitations: justification, optimization (ALARA concepts and applications) and dose limits are covered in Section seven. Section eight is an expanded version of shielding, and the internal dosimetry discussion has been extensively revised tomore » reflect the concepts contained in the MIRD methodology and ICRP 30. The remaining sections discuss the operational health physics approach to monitoring radiation. Individual sections include radiation detection principles, instrument operation and counting statistics, health physics instruments and personnel monitoring devices. The last five sections deal with the nature of, operation principles of, health physics aspects of, and monitoring approaches to air sampling, reactors, nuclear safety, gloveboxes and hot cells, accelerators and x ray sources. Decontamination, waste disposal and transportation of radionuclides are added topics. Several appendices containing constants, symbols, selected mathematical topics, and the Chart of the Nuclides, and an index have been included.« less

Chapter 9: 30 Years of Living in a Solar House in Colorado

DOE Office of Scientific and Technical Information (OSTI.GOV)

Emery, Keith A; Emery, Pat

2016-12-03

Having met in 1980 while working at the National Renewable Energy Laboratory, we were inspired by the vision of a renewable energy future to raise our family in a passive solar home. A basic, factory-cut, trilevel house design was selected in 1985 and intentionally sited and modified according to passive solar design principles to optimize conservation and solar gain, with a plan to add photovoltaics as soon as feasible.

Metallurgy and Heat Treating. Welding Module 7. Instructor's Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This guide is intended to assist vocational educators in teaching a three-unit module in metallurgy and heat treating. The module is part of a welding curriculum that has been designed to be totally integrated with Missouri's Vocational Instruction Management System. The basic principles of metallurgy and heat treatment and techniques for…

Energy. Physical Science in Action. Teacher's Manual and Workbook.

ERIC Educational Resources Information Center

Sneider, Cary I.; Piccotto, Henri

The Science in Action series is designed to teach practical science concepts to special-needs students. It is intended to develop students' problem-solving skills by teaching them to observe, record, analyze, conclude, and predict. This document contains a student workbook which deals with basic principles of physical science. Six separate units…

Principles for Designing Pragmatic Knowledge Management Systems

ERIC Educational Resources Information Center

Cavaleri, Steven A.

2004-01-01

Knowledge management continues to evolve as a discipline, yet even basic features that define a discipline have to be established. Developing a shared understanding of core concepts, such as the meaning of "knowledge", has been elusive in this field. In the absence of reaching a universal definition, surrogates for knowledge are adopted because of…

Sound. Physical Science in Action. Teacher's Manual and Workbook.

ERIC Educational Resources Information Center

Chan, Janis Fisher; Friedland, Mary

The Science in Action series is designed to teach practical science concepts to special-needs students. It is intended to develop students' problem-solving skills by teaching them to observe, record, analyze, conclude, and predict. This document contains a student workbook which deals with basic principles of physical science. Six separate units…

Animals. Life Science in Action. Teacher's Manual and Workbook.

ERIC Educational Resources Information Center

Roderman, Winifred Ho; Booth, Gerald

The Science in Action series is designed to teach practical science concepts to special-needs students. It is intended to develop students' problem-solving skills by teaching them to observe, record, analyze, conclude, and predict. This document contains a student workbook which deals with basic principles of life science. Six separate units…

Life Science Standards and Curriculum Development for 9-12.

ERIC Educational Resources Information Center

Speece, Susan P.; Andersen, Hans O.

1996-01-01

Proposes a design for a life science curriculum following the National Research Council National Science Education Standards. The overarching theme is that science as inquiry should be recognized as a basic and controlling principle in the ultimate organization and experiences in students' science education. Six-week units include Matter, Energy,…

Principles of School Business Management. Second Edition.

ERIC Educational Resources Information Center

Wood, R. Craig; And Others

The contemporary school business administrator must be knowledgeable in a wide variety of areas. This book was designed to serve as a basic reference for practicing school business administrators as well as a text for graduate courses in school business administration. It offers a comprehensive overview of school business management. Chapters 1-3…

Design principles for shift current photovoltaics

DOE PAGES

Cook, Ashley M.; M. Fregoso, Benjamin; de Juan, Fernando; ...

2017-01-25

While the basic principles of conventional solar cells are well understood, little attention has gone towards maximizing the efficiency of photovoltaic devices based on shift currents. Furthermore, by analysing effective models, here we outline simple design principles for the optimization of shift currents for frequencies near the band gap. This method allows us to express the band edge shift current in terms of a few model parameters and to show it depends explicitly on wavefunctions in addition to standard band structure. We use our approach to identify two classes of shift current photovoltaics, ferroelectric polymer films and single-layer orthorhombic monochalcogenidesmore » such as GeS, which display the largest band edge responsivities reported so far. Moreover, exploring the parameter space of the tight-binding models that describe them we find photoresponsivities that can exceed 100 mA W -1 . Our results illustrate the great potential of shift current photovoltaics to compete with conventional solar cells.« less

Design principles for shift current photovoltaics

PubMed Central

Cook, Ashley M.; M. Fregoso, Benjamin; de Juan, Fernando; Coh, Sinisa; Moore, Joel E.

2017-01-01

While the basic principles of conventional solar cells are well understood, little attention has gone towards maximizing the efficiency of photovoltaic devices based on shift currents. By analysing effective models, here we outline simple design principles for the optimization of shift currents for frequencies near the band gap. Our method allows us to express the band edge shift current in terms of a few model parameters and to show it depends explicitly on wavefunctions in addition to standard band structure. We use our approach to identify two classes of shift current photovoltaics, ferroelectric polymer films and single-layer orthorhombic monochalcogenides such as GeS, which display the largest band edge responsivities reported so far. Moreover, exploring the parameter space of the tight-binding models that describe them we find photoresponsivities that can exceed 100 mA W−1. Our results illustrate the great potential of shift current photovoltaics to compete with conventional solar cells. PMID:28120823

Design principles for shift current photovoltaics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, Ashley M.; M. Fregoso, Benjamin; de Juan, Fernando

While the basic principles of conventional solar cells are well understood, little attention has gone towards maximizing the efficiency of photovoltaic devices based on shift currents. Furthermore, by analysing effective models, here we outline simple design principles for the optimization of shift currents for frequencies near the band gap. This method allows us to express the band edge shift current in terms of a few model parameters and to show it depends explicitly on wavefunctions in addition to standard band structure. We use our approach to identify two classes of shift current photovoltaics, ferroelectric polymer films and single-layer orthorhombic monochalcogenidesmore » such as GeS, which display the largest band edge responsivities reported so far. Moreover, exploring the parameter space of the tight-binding models that describe them we find photoresponsivities that can exceed 100 mA W -1 . Our results illustrate the great potential of shift current photovoltaics to compete with conventional solar cells.« less

Research and Simulation on Application of the Mobile IP Network

NASA Astrophysics Data System (ADS)

Yibing, Deng; Wei, Hu; Minghui, Li; Feng, Gao; Junyi, Shen

The paper analysed the mobile node, home agent, and foreign agent of mobile IP network firstly, some key technique, such as mobile IP network basical principle, protocol work principle, agent discovery, registration, and IP packet transmission, were discussed. Then a network simulation model was designed, validating the characteristic of mobile IP network, and some advantages, which were brought by mobile network, were testified. Finally, the conclusion is gained: mobile IP network could realize the expectation of consumer that they can communicate with others anywhere.

Healthcare professional and patient codesign and validation of a mechanism for service users to feedback patient safety experiences following a care transfer: a qualitative study

PubMed Central

Scott, Jason; Heavey, Emily; Waring, Justin; Jones, Diana; Dawson, Pamela

2016-01-01

Objective To develop and validate a mechanism for patients to provide feedback on safety experiences following a care transfer between organisations. Design Qualitative study using participatory methods (codesign workshops) and cognitive interviews. Workshop data were analysed concurrently with participants, and cognitive interviews were thematically analysed using a deductive approach based on the developed feedback mechanism. Participants Expert patients (n=5) and healthcare professionals (n=11) were recruited purposively to develop the feedback mechanism in 2 workshops. Workshop 1 explored principles underpinning safety feedback mechanisms, and workshop 2 included the practical development of the feedback mechanism. Final design and content of the feedback mechanism (a safety survey) were verified by workshop participants, and cognitive interviews (n=28) were conducted with patients. Results Workshop participants identified that safety feedback mechanisms should be patient-centred, short and concise with clear signposting on how to complete, with an option to be anonymous and balanced between positive (safe) and negative (unsafe) experiences. The agreed feedback mechanism consisted of a survey split across 3 stages of the care transfer: departure, journey and arrival. Care across organisational boundaries was recognised as being complex, with healthcare professionals acknowledging the difficulty implementing changes that impact other organisations. Cognitive interview participants agreed the content of the survey was relevant but identified barriers to completion relating to the survey formatting and understanding of a care transfer. Conclusions Participatory, codesign principles helped overcome differences in understandings of safety in the complex setting of care transfers when developing a safety survey. Practical barriers to the survey's usability and acceptability to patients were identified, resulting in a modified survey design. Further research is required to determine the usability and acceptability of the survey to patients and healthcare professionals, as well as identifying how governance structures should accommodate patient feedback when relating to multiple health or social care providers. PMID:27406641

Nanomaterials-based biosensors for detection of microorganisms and microbial toxins.

PubMed

Sutarlie, Laura; Ow, Sian Yang; Su, Xiaodi

2017-04-01

Detection of microorganisms and microbial toxins is important for health and safety. Due to their unique physical and chemical properties, nanomaterials have been extensively used to develop biosensors for rapid detection of microorganisms with microbial cells and toxins as target analytes. In this paper, the design principles of nanomaterials-based biosensors for four selected analyte categories (bacteria cells, toxins, mycotoxins, and protozoa cells), closely associated with the target analytes' properties is reviewed. Five signal transducing methods that are less equipment intensive (colorimetric, fluorimetric, surface enhanced Raman scattering, electrochemical, and magnetic relaxometry methods) is described and compared for their sensory performance (in term oflimit of detection, dynamic range, and response time) for all analyte categories. In the end, the suitability of these five sensing principles for on-site or field applications is discussed. With a comprehensive coverage of nanomaterials, design principles, sensing principles, and assessment on the sensory performance and suitability for on-site application, this review offers valuable insight and perspective for designing suitable nanomaterials-based microorganism biosensors for a given application. Copyright © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Optics and optics-based technologies education with the benefit of LabVIEW

NASA Astrophysics Data System (ADS)

Wan, Yuhong; Man, Tianlong; Tao, Shiquan

2015-10-01

The details of design and implementation of incoherent digital holographic experiments based on LabVIEW are demonstrated in this work in order to offer a teaching modal by making full use of LabVIEW as an educational tool. Digital incoherent holography enables holograms to be recorded from incoherent light with just a digital camera and spatial light modulator and three-dimensional properties of the specimen are revealed after the hologram is reconstructed in the computer. The experiment of phase shifting incoherent digital holography is designed and implemented based on the principle of Fresnel incoherent correlation holography. An automatic control application is developed based on LabVIEW, which combines the functions of major experimental hardware control and digital reconstruction of the holograms. The basic functions of the system are completed and a user-friendly interface is provided for easy operation. The students are encouraged and stimulated to learn and practice the basic principle of incoherent digital holography and other related optics-based technologies during the programming of the application and implementation of the system.

Exercise Physiology. Basic Stuff Series I. I.

ERIC Educational Resources Information Center

Svoboda, Milan; And Others

The fundamentals of exercise physiology (the study of the physiological effects of bodily exertion) form the basis for this booklet designed for teachers of physical education. The scientific principles underlying the building of muscular strength and flexibility are described and illustrated. Topics covered include: (1) muscular strength,…

Electronic circuits for communications systems: A compilation

NASA Technical Reports Server (NTRS)

1972-01-01

The compilation of electronic circuits for communications systems is divided into thirteen basic categories, each representing an area of circuit design and application. The compilation items are moderately complex and, as such, would appeal to the applications engineer. However, the rationale for the selection criteria was tailored so that the circuits would reflect fundamental design principles and applications, with an additional requirement for simplicity whenever possible.

All-dielectric metamaterial frequency selective surface

NASA Astrophysics Data System (ADS)

Wang, Jun; Qu, Shaobo; Li, Liyang; Wang, Jiafu; Feng, Mingde; Ma, Hua; Du, Hongliang; Xu, Zhuo

Frequency selective surface (FSS) has been extensively studied due to its potential applications in radomes, antenna reflectors, high-impedance surfaces and absorbers. Recently, a new principle of designing FSS has been proposed and mainly studied in two levels. In the level of materials, dielectric materials instead of metallic patterns are capable of achieving more functional performance in FSS design. Moreover, FSSs made of dielectric materials can be used in different extreme environments, depending on their electrical, thermal or mechanical properties. In the level of design principle, the theory of metamaterial can be used to design FSS in a convenient and concise way. In this review paper, we provide a brief summary about the recent progress in all-dielectric metamaterial frequency selective surface (ADM-FSS). The basic principle of designing ADM-FSS is summarized. As significant tools, Mie theory and dielectric resonator (DR) theory are given which illustrate clearly how they are used in the FSS design. Then, several design cases including dielectric particle-based ADM-FSS and dielectric network-based ADM-FSS are introduced and reviewed. After a discussion of these two types of ADM-FSSs, we reviewed the existing fabrication techniques that are used in building the experiment samples. Finally, issues and challenges regarding the rapid fabrication techniques and further development aspects are discussed.

[Current progress in food geographical origin traceability by near infrared spectroscopy technology].

PubMed

Ma, Dong-Hong; Wang, Xi-Chang; Liu, Li-Ping; Liu, Yuan

2011-04-01

The geographical origin traceability of food, an important part of traceability system, is effective in protecting the quality and safety of foodstuffs. Near-infrared spectroscopy (NIR), which is a powerful technique for geographical origin traceability, has attracted extensive attention by scientists due to its speediness, non-pollution and simple operation. This paper presents the advantages and disadvantages of techniques that have been used for food geographical origin traceability. The basic principles of NIR and its applications in different food geographical origin traceability are presented too. Furthermore, problems in applications are analyzed and the future development trends are discussed.

Health Monitoring and Evaluation of Long-Span Bridges Based on Sensing and Data Analysis: A Survey

PubMed Central

Zhou, Jianting; Li, Xiaogang; Xia, Runchuan; Yang, Jun; Zhang, Hong

2017-01-01

Aimed at the health monitoring and evaluation of bridges based on sensing technology, the monitoring contents of different structural types of long-span bridges were defined. Then, the definition, classification, selection principle, and installation requirements of the sensors were summarized. The concept was proposed that new adaptable long-life sensors could be developed by new theories and new effects. The principle and methods to select controlled sections and optimize the layout design of measuring points were illustrated. The functional requirements were elaborated on about the acquisition, transmission, processing, and management of sensing information. Some advanced concepts about the method of bridge safety evaluation were demonstrated and technology bottlenecks in the current safety evaluation were also put forward. Ultimately, combined with engineering practices, an application was carried out. The results showed that new, intelligent, and reliable sensor technology would be one of the main future development directions in the long-span bridge health monitoring and evaluation field. Also, it was imperative to optimize the design of the health monitoring system and realize its standardization. Moreover, it is a heavy responsibility to explore new thoughts and new concepts regarding practical bridge safety and evaluation technology. PMID:28300785

Online Lectures in Undergraduate Medical Education: Scoping Review.

PubMed

Tang, Brandon; Coret, Alon; Qureshi, Aatif; Barron, Henry; Ayala, Ana Patricia; Law, Marcus

2018-04-10

The adoption of the flipped classroom in undergraduate medical education calls on students to learn from various self-paced tools-including online lectures-before attending in-class sessions. Hence, the design of online lectures merits special attention, given that applying multimedia design principles has been shown to enhance learning outcomes. The aim of this study was to understand how online lectures have been integrated into medical school curricula, and whether published literature employs well-accepted principles of multimedia design. This scoping review followed the methodology outlined by Arksey and O'Malley (2005). Databases, including MEDLINE, PsycINFO, Education Source, FRANCIS, ERIC, and ProQuest, were searched to find articles from 2006 to 2016 related to online lecture use in undergraduate medical education. In total, 45 articles met our inclusion criteria. Online lectures were used in preclinical and clinical years, covering basic sciences, clinical medicine, and clinical skills. The use of multimedia design principles was seldom reported. Almost all studies described high student satisfaction and improvement on knowledge tests following online lecture use. Integration of online lectures into undergraduate medical education is well-received by students and appears to improve learning outcomes. Future studies should apply established multimedia design principles to the development of online lectures to maximize their educational potential. ©Brandon Tang, Alon Coret, Aatif Qureshi, Henry Barron, Ana Patricia Ayala, Marcus Law. Originally published in JMIR Medical Education (http://mededu.jmir.org), 10.04.2018.

Guiding the Family: Practical Counseling Techniques. Second Edition.

ERIC Educational Resources Information Center

Grunwald, Bernice Bronia; McAbee, Harold V.

This text on principles of Adlerian Psychology is designed for use in family counseling. It begins with an overview of Alfred Adler and his basic philosophy on human relationships. Throughout the book, as the Adlerian theory is discussed, practical application of theory is explained for counselors. Counselors must have a firm theoretical basis for…

Honors Workshop for Middle School Science Teachers. Final Report.

ERIC Educational Resources Information Center

Meisner, Gerald W.; Lee, Ernest W.

The Honors Workshop for Middle School Science Teachers was designed to address teachers' conceptual understanding of basic scientific principles, student misconceptions and how to deal with them, and observation and measurement techniques. For 4 weeks in summer and on 6 Saturdays during 2 academic years, 30 leaders among science teachers from the…

GUIDE FOR COURSE OF STUDY FOR COOK (HOTEL AND RESTAURANT) (ENTRY).

ERIC Educational Resources Information Center

GUNN, VIRLAH

DESIGNED FOR TEACHER USE, THIS GUIDE FOR TRAINING COOKS IN HOTEL AND RESTAURANT OCCUPATIONS AIMS--(1) TO DEVELOP MANIPULATIVE SKILLS, (2) TO DEVELOP UNDERSTANDING OF THE BASIC PRINCIPLES OF SCIENCE, MATHEMATICS, AND RELATED KNOWLEDGE THAT CONDITION THESE SKILLS, (3) TO UNDERSTAND THE ADVANTAGES OF STEADY EMPLOYMENT, (4) TO DEVELOP HIGH STANDARDS…

Cinematography; A Guide for Film Makers and Film Teachers.

ERIC Educational Resources Information Center

Malkiewicz, J. Kris

Concentrating on the work of the cinematographer--the man behind the camera or in charge of the shooting--this book also touches on techniques of sound recording, cutting, and production logistics. Technical discussions designed to provide the basic principles and techniques of cinematography are presented about cameras, films and sensitometry,…

A Virtual World Workshop Environment for Learning Agile Software Development Techniques

ERIC Educational Resources Information Center

Parsons, David; Stockdale, Rosemary

2012-01-01

Multi-User Virtual Environments (MUVEs) are the subject of increasing interest for educators and trainers. This article reports on a longitudinal project that seeks to establish a virtual agile software development workshop hosted in the Open Wonderland MUVE, designed to help learners to understand the basic principles of some core agile software…

Mommy, Buy Me a China Doll: A Kindergarten Economics Project.

ERIC Educational Resources Information Center

Wehmeyer, Mary M.

This monthlong interdisciplinary, award winning project was designed to help kindergarten children in Kentucky understand basic economic principles that affect their daily lives. The children study about the poverty-stricken people of the Appalachian mountain area of the state. Through the operation of a classroom coal mine and company store, the…

SALES PROMOTION, A SUGGESTED ADULT DISTRIBUTIVE EDUCATION COURSE OUTLINE.

ERIC Educational Resources Information Center

RUBIN, ALAN J.; AND OTHERS

THIS SUGGESTED OUTLINE FOR A BASIC COURSE IN SALES PROMOTION IS DESIGNED FOR NOT LESS THAN FIVE 2-HOUR SESSIONS ON (1) ASPECTS OF SALES PROMOTION, (2) SALES PROMOTION TECHNIQUES, (3) NEWSPAPER ADVERTISING, (4) WINDOW AND INTERIOR DISPLAY PRINCIPLES, AND (5) SELECTED PROMOTIONAL MEDIA AND DEVICES. POSSIBLE TEACHERS INCLUDE A SALES PROMOTION…

Tested Demonstrations.

ERIC Educational Resources Information Center

Gilbert, George L., Ed.

1983-01-01

Provides directions for setup and performance of two demonstrations. The first demonstrates the principles of Raoult's Law; using a simple apparatus designed to measure vapor pressure. The second illustrates the energy available from alcohol combustion (includes safety precautions) using an alcohol-fueled missile. (JM)

Concept of Draft International Standard for a Unified Approach to Space Program Quality Assurance

NASA Astrophysics Data System (ADS)

Stryzhak, Y.; Vasilina, V.; Kurbatov, V.

2002-01-01

For want of the unified approach to guaranteed space project and product quality assurance, implementation of many international space programs has become a challenge. Globalization of aerospace industry and participation of various international ventures with diverse quality assurance requirements in big international space programs requires for urgent generation of unified international standards related to this field. To ensure successful fulfillment of space missions, aerospace companies should design and process reliable and safe products with properties complying or bettering User's (or Customer's) requirements. Quality of the products designed or processed by subcontractors (or other suppliers) should also be in compliance with the main user (customer)'s requirements. Implementation of this involved set of unified requirements will be made possible by creating and approving a system (series) of international standards under a generic title Space Product Quality Assurance based on a system consensus principle. Conceptual features of the baseline standard in this system (series) should comprise: - Procedures for ISO 9000, CEN and ECSS requirements adaptation and introduction into space product creation, design, manufacture, testing and operation; - Procedures for quality assurance at initial (design) phases of space programs, with a decision on the end product made based on the principle of independence; - Procedures to arrange incoming inspection of products delivered by subcontractors (including testing, audit of supplier's procedures, review of supplier's documentation), and space product certification; - Procedures to identify materials and primary products applied; - Procedures for quality system audit at the component part, primary product and materials supplier facilities; - Unified procedures to form a list of basic performances to be under configuration management; - Unified procedures to form a list of critical space product components, and unified procedures to define risks related to the specific component application and evaluate safety for the entire program implementation. In the eyes of the authors, those features together with a number of other conceptual proposals should constitute a unified standard-technical basis for implementing international space programs.

Instrumental variable methods in comparative safety and effectiveness research†

PubMed Central

Brookhart, M. Alan; Rassen, Jeremy A.; Schneeweiss, Sebastian

2010-01-01

Summary Instrumental variable (IV) methods have been proposed as a potential approach to the common problem of uncontrolled confounding in comparative studies of medical interventions, but IV methods are unfamiliar to many researchers. The goal of this article is to provide a non-technical, practical introduction to IV methods for comparative safety and effectiveness research. We outline the principles and basic assumptions necessary for valid IV estimation, discuss how to interpret the results of an IV study, provide a review of instruments that have been used in comparative effectiveness research, and suggest some minimal reporting standards for an IV analysis. Finally, we offer our perspective of the role of IV estimation vis-à-vis more traditional approaches based on statistical modeling of the exposure or outcome. We anticipate that IV methods will be often underpowered for drug safety studies of very rare outcomes, but may be potentially useful in studies of intended effects where uncontrolled confounding may be substantial. PMID:20354968

Optical Air Flow Measurements for Flight Tests and Flight Testing Optical Air Flow Meters

NASA Technical Reports Server (NTRS)

Jentink, Henk W.; Bogue, Rodney K.

2005-01-01

Optical air flow measurements can support the testing of aircraft and can be instrumental to in-flight investigations of the atmosphere or atmospheric phenomena. Furthermore, optical air flow meters potentially contribute as avionics systems to flight safety and as air data systems. The qualification of these instruments for the flight environment is where we encounter the systems in flight testing. An overview is presented of different optical air flow measurement techniques applied in flight and what can be achieved with the techniques for flight test purposes is reviewed. All in-flight optical airflow velocity measurements use light scattering. Light is scattered on both air molecules and aerosols entrained in the air. Basic principles of making optical measurements in flight, some basic optical concepts, electronic concepts, optoelectronic interfaces, and some atmospheric processes associated with natural aerosols are reviewed. Safety aspects in applying the technique are shortly addressed. The different applications of the technique are listed and some typical examples are presented. Recently NASA acquired new data on mountain rotors, mountain induced turbulence, with the ACLAIM system. Rotor position was identified using the lidar system and the potentially hazardous air flow profile was monitored by the ACLAIM system.

Nuclear safety policy working group recommendations on nuclear propulsion safety for the space exploration initiative

NASA Technical Reports Server (NTRS)

Marshall, Albert C.; Lee, James H.; Mcculloch, William H.; Sawyer, J. Charles, Jr.; Bari, Robert A.; Cullingford, Hatice S.; Hardy, Alva C.; Niederauer, George F.; Remp, Kerry; Rice, John W.

1993-01-01

An interagency Nuclear Safety Working Group (NSPWG) was chartered to recommend nuclear safety policy, requirements, and guidelines for the Space Exploration Initiative (SEI) nuclear propulsion program. These recommendations, which are contained in this report, should facilitate the implementation of mission planning and conceptual design studies. The NSPWG has recommended a top-level policy to provide the guiding principles for the development and implementation of the SEI nuclear propulsion safety program. In addition, the NSPWG has reviewed safety issues for nuclear propulsion and recommended top-level safety requirements and guidelines to address these issues. These recommendations should be useful for the development of the program's top-level requirements for safety functions (referred to as Safety Functional Requirements). The safety requirements and guidelines address the following topics: reactor start-up, inadvertent criticality, radiological release and exposure, disposal, entry, safeguards, risk/reliability, operational safety, ground testing, and other considerations.

Net current control device. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fugate, D.; Cooper, J.H.

1998-11-01

Net currents generally result in elevated magnetic fields because the alternate paths are distant from the circuit conductors. Investigations have shown that one of the primary sources of power frequency magnetic fields in residential buildings is currents that return to their source via paths other than the neutral conductors. As part of EPRI`s Magnetic Field Shielding Project, ferromagnetic devices, called net current control (NCC) devices, were developed and tested for use in reducing net currents on electric power cables and the resulting magnetic fields. Applied to a residential service drop, an NCC device reduces net current by forcing current offmore » local non-utility ground paths, and back onto the neutral conductor. Circuit models and basic design equations for the NCC concept were developed, and proof-of-principles tests were carried out on an actual residence with cooperation from the local utility. After proving the basic concepts, three prototype NCC devices were built and tested on a simulated neighborhood power system. Additional prototypes were built for testing by interested EPRI utility members. Results have shown that the NCC prototypes installed on residential service drops reduce net currents to milliampere levels with compromising the safety of the ground system. Although the focus was on application to residential service cables, the NCC concept is applicable to single-phase and three-phase distribution systems as well.« less

Testing the limits of freedom of contract: the commercialization of reproductive materials and services.

PubMed

Trebilcock, M; Martin, M; Lawson, A; Lewis, P

1994-01-01

This article examines the cases for and against commercializing, or "commodifying," reproductive materials and services. Using a supply/demand third-party framework, three basic scenarios in which commercial-exchange relationships may be possible--exchange of gametes and zygotes, exchange of gestational services, and exchange of fetal material--and the major parties of interest, or stakeholders, are identified. The study sketches the liberal, essentialist, and radical contingency theories that shape the debate over the commercialization of reproductive materials and services. The article then attempts to derive some basic governing principles that reflect as much common ground as possible amongst these various normative perspectives, while recognizing that complete reconciliation is impossible. Taken together, these principles are designed to reflect a strategy of "constrained commodification," where commercialization or commodification, that is, financial remuneration, plays a relatively neutral role in the utilization of reproductive materials and services. In light of these principles, the article concludes by sketching legal and regulatory regimes with respect to the exchange of gametes and zygotes, gestational services, and fetal tissue.

Stay Alive--Simulation for Situational Safety Awareness

NASA Technical Reports Server (NTRS)

Ruder, Michelle

2008-01-01

STAY ALIVE is an idea for a safety awareness simulation prototype, powered by gaming technology, that would make safety training enlightening, engaging and fun. Recalling initial instructions and using situational awareness principles, participants would escape a fire by choosing the appropriate door. Escape times would be measured while stressors increased. This presentation describes how STAY ALIVE utilizes first person point of view (PoV), a generic scenario, immersion- and presence-enhancing design, and ease of distribution to provide more people opportunity to realize, review, analyze and practice effective awareness behaviors. The goals for this prototype include facilitating interest in first-person PoV safety training and eliciting further suggestions on prevention technologies.

Exercise, Animal Aerobics, and Interpretation?

ERIC Educational Resources Information Center

Oliver, Valerie

1996-01-01

Describes an aerobic activity set to music for children that mimics animal movements. Example exercises include walking like a penguin or jumping like a cricket. Stresses basic aerobic principles and designing the program at the level of children's motor skills. Benefits include reaching people who normally don't visit nature centers, and bridging…

The Micro TIPS - Cases - Programmed Learning Course Package.

ERIC Educational Resources Information Center

Heriot-Watt Univ., Edinburgh (Scotland). Esmee Fairbairn Economics Research Centre.

Part of an economic education series, the course package is designed to teach basic concepts and principles of microeconomics and how they can be applied to various world problems. For use with college students, learning is gained through lectures, tutorials, textbooks, programmed text, cases, and TIPS (Teaching Information Processing System).…

An Introduction to Fast Fourier Transforms through the Study of Oscillating Reactions.

ERIC Educational Resources Information Center

Eastman, M. P.; And Others

1986-01-01

Discusses an experiment designed to introduce students to the basic principles of the fast Fourier transform and Fourier smoothing through transformation of time-dependent optical absorption data from an oscillating reaction. Uses the Belousov-Zhabotinskii reaction. Describes the experimental setup and data analysis techniques.

The Macro - Games Course Package.

ERIC Educational Resources Information Center

Heriot-Watt Univ., Edinburgh (Scotland). Esmee Fairbairn Economics Research Centre.

Part of an Economic Education Series, the course package is designed to teach basic concepts and fundamental principles of macroeconomics and how they can be applied to various world problems. For use with college students, learning is gained through lectures, discussion, simulation games, programmed learning, and text. Time allotment is a 15-week…

Occupational safety and health, green chemistry, and sustainability: a review of areas of convergence

PubMed Central

2013-01-01

With increasing numbers and quantities of chemicals in commerce and use, scientific attention continues to focus on the environmental and public health consequences of chemical production processes and exposures. Concerns about environmental stewardship have been gaining broader traction through emphases on sustainability and “green chemistry” principles. Occupational safety and health has not been fully promoted as a component of environmental sustainability. However, there is a natural convergence of green chemistry/sustainability and occupational safety and health efforts. Addressing both together can have a synergistic effect. Failure to promote this convergence could lead to increasing worker hazards and lack of support for sustainability efforts. The National Institute for Occupational Safety and Health has made a concerted effort involving multiple stakeholders to anticipate and identify potential hazards associated with sustainable practices and green jobs for workers. Examples of potential hazards are presented in case studies with suggested solutions such as implementing the hierarchy of controls and prevention through design principles in green chemistry and green building practices. Practical considerations and strategies for green chemistry, and environmental stewardship could benefit from the incorporation of occupational safety and health concepts which in turn protect affected workers. PMID:23587312

Occupational safety and health, green chemistry, and sustainability: a review of areas of convergence.

PubMed

Schulte, Paul A; McKernan, Lauralynn T; Heidel, Donna S; Okun, Andrea H; Dotson, Gary Scott; Lentz, Thomas J; Geraci, Charles L; Heckel, Pamela E; Branche, Christine M

2013-04-15

With increasing numbers and quantities of chemicals in commerce and use, scientific attention continues to focus on the environmental and public health consequences of chemical production processes and exposures. Concerns about environmental stewardship have been gaining broader traction through emphases on sustainability and "green chemistry" principles. Occupational safety and health has not been fully promoted as a component of environmental sustainability. However, there is a natural convergence of green chemistry/sustainability and occupational safety and health efforts. Addressing both together can have a synergistic effect. Failure to promote this convergence could lead to increasing worker hazards and lack of support for sustainability efforts. The National Institute for Occupational Safety and Health has made a concerted effort involving multiple stakeholders to anticipate and identify potential hazards associated with sustainable practices and green jobs for workers. Examples of potential hazards are presented in case studies with suggested solutions such as implementing the hierarchy of controls and prevention through design principles in green chemistry and green building practices. Practical considerations and strategies for green chemistry, and environmental stewardship could benefit from the incorporation of occupational safety and health concepts which in turn protect affected workers.

Sustaining engineering codes of ethics for the twenty-first century.

PubMed

Michelfelder, Diane; Jones, Sharon A

2013-03-01

How much responsibility ought a professional engineer to have with regard to supporting basic principles of sustainable development? While within the United States, professional engineering societies, as reflected in their codes of ethics, differ in their responses to this question, none of these professional societies has yet to put the engineer's responsibility toward sustainability on a par with commitments to public safety, health, and welfare. In this paper, we aim to suggest that sustainability should be included in the paramountcy clause because it is a necessary condition to ensure the safety, health, and welfare of the public. Part of our justification rests on the fact that to engineer sustainably means among many things to consider social justice, understood as the fair and equitable distribution of social goods, as a design constraint similar to technical, economic, and environmental constraints. This element of social justice is not explicit in the current paramountcy clause. Our argument rests on demonstrating that social justice in terms of both inter- and intra-generational equity is an important dimension of sustainability (and engineering). We also propose that embracing sustainability in the codes while recognizing the role that social justice plays may elevate the status of the engineer as public intellectual and agent of social good. This shift will then need to be incorporated in how we teach undergraduate engineering students about engineering ethics.

Laboratory Training Manual on the Use of Nuclear Techniques in Pesticide Research. Technical Reports Series No. 225.

ERIC Educational Resources Information Center

International Atomic Energy Agency, Vienna (Austria).

Radiolabelled pesticides are used: in studies involving improved formulations of pesticides, to assist in developing standard residue analytical methodology, and in obtaining metabolism data to support registration of pesticides. This manual is designed to give the scientist involved in pesticide research the basic terms and principles for…

Organ acquisition cost centers Part I: medicare regulations--truth or consequence.

PubMed

Abecassis, M

2006-12-01

Organ Acquisition Cost Centers (OACC) were designed to encourage and incentivize hospitals to provide transplantation services. The purpose of this article (Part I) is to familiarize transplant professionals and transplant center administrators with the regulations that govern OACC. An historical perspective of the evolution of these regulations is necessary to better understand the basic principles underlying this complex area of transplant finance. There is a wide variation in transplant center OACC reporting, suggesting under-reporting by some and overreporting by others. Correct reporting is essential since OACC are auditable. We have surveyed 13 audits by the Office of the Inspector General (OIG) of transplant center OACC in an attempt to identify trends in reporting practices by transplant centers that are not deemed acceptable by the OIG. We discuss these findings in the context of some basic definitions that refer specifically to cost accounting principles necessary for accurate reporting of OACC.

A critical assessment of regulatory triggers for products of biotechnology: Product vs. process

PubMed Central

McHughen, Alan

2016-01-01

ABSTRACT Regulatory policies governing the safety of genetic engineering (rDNA) and the resulting products (GMOs) have been contentious and divisive, especially in agricultural applications of the technologies. These tensions led to vastly different approaches to safety regulation in different jurisdictions, even though the intent of regulations—to assure public and environmental safety—are common worldwide, and even though the international scientific communities agree on the basic principles of risk assessment and risk management. So great are the political divisions that jurisdictions cannot even agree on the appropriate triggers for regulatory capture, whether product or process. This paper reviews the historical policy and scientific implications of agricultural biotechnology regulatory approaches taken by the European Union, USA and Canada, using their respective statutes and regulations, and then critically assesses the scientific underpinnings of each. PMID:27813691

Critical appraisal of scientific articles: part 1 of a series on evaluation of scientific publications.

PubMed

du Prel, Jean-Baptist; Röhrig, Bernd; Blettner, Maria

2009-02-01

In the era of evidence-based medicine, one of the most important skills a physician needs is the ability to analyze scientific literature critically. This is necessary to keep medical knowledge up to date and to ensure optimal patient care. The aim of this paper is to present an accessible introduction into critical appraisal of scientific articles. Using a selection of international literature, the reader is introduced to the principles of critical reading of scientific articles in medicine. For the sake of conciseness, detailed description of statistical methods is omitted. Widely accepted principles for critically appraising scientific articles are outlined. Basic knowledge of study design, structuring of an article, the role of different sections, of statistical presentations as well as sources of error and limitation are presented. The reader does not require extensive methodological knowledge. As far as necessary for critical appraisal of scientific articles, differences in research areas like epidemiology, clinical, and basic research are outlined. Further useful references are presented. Basic methodological knowledge is required to select and interpret scientific articles correctly.

Exploring the Basic Principles of Electric Motors and Generators with a Low-Cost Sophomore-Level Experiment

ERIC Educational Resources Information Center

Schubert, T. F.; Jacobitz, F. G.; Kim, E. M.

2009-01-01

In order to meet changing curricular needs, an electric motor and generator laboratory experience was designed, implemented, and assessed. The experiment is unusual in its early placement in the curriculum and in that it focuses on modeling electric motors, predicting their performance, and measuring efficiency of energy conversion. While…

Structural crashworthiness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, N.; Wierzbicki, T.

1983-01-01

Behind the quest for safety in all forms of transport lies a complex technology of which structural crashworthiness forms an important part. This volume contains the work of over twenty experts whose interests range from the fundamental principles of structural collapse to the application of those principles to the design of ships, aircraft, road vehicles, and rail vehicles. The text focuses on the application of analytical and experimental techniques to predict energy dissipation characteristics of thin-walled structures and structural members under quasi-static and dynamic loadings.

Lean Production as an Innovative Approach to Construction

NASA Astrophysics Data System (ADS)

Spišáková, Marcela; Kozlovská, Mária

2013-06-01

Lean production presents a new approach to the construction management which has enabled enterprises to attain very high levels of efficiency, competitiveness and flexibility in production systems. Nowadays, a number of industrial processes are managed in accordance with these advanced management principles [1]. The principles of lean production are applied within the integrated design and delivery solutions (IDDS) and prefabricated construction. IDDS uses collaborative work processes and enhanced skills, with integrated data, information, and knowledge management to minimize structural and process inefficiencies and to enhance the value delivered during design, build, and operation, and across projects. Prefabrication presents a one of opportunities for construction methods, which allows the compliance with principles of sustainable design, provides the potential benefits such as faster construction, fewer housing defects, reduction in energy use and waste and elimination of environmental and safety risks. This paper presents the lean production within the IDDS and its potential in the modern prefabrication. There is created a field providing of benefits of lean production in construction industry.

[Basic requirements on post-marketing clinical re-evaluation of chinese medicine and phase IV clinical trials].

PubMed

Xie, Yanming; Wang, Yanping; Tian, Feng; Wang, Yongyan

2011-10-01

As information on safety and effectiveness is not comprehensive, gained from the researches for listing approval of Chinese medicine, it is very necessary to conduct post-marketing clinical re-evaluation of Chinese medicine. Effectiveness, safety and economic evaluation are three main aspects of post-marketing clinical re-evaluation. In this paper, the difference and relations between the post-marketing clinical re-evaluation and the phase IV clinical trials were discussed, and the basic requests and suggestions were proposed, according to the domestic and foreign relevant regulations and experts' suggestions, and discussed the requirements of the phase IV clinical trials on indications, design methods, inclusion and exclusion criteria, sample size, etc.

Modified Universal Design Survey: Enhancing Operability of Launch Vehicle Ground Crew Worksites

NASA Technical Reports Server (NTRS)

Blume, Jennifer L.

2010-01-01

Operability is a driving requirement for next generation space launch vehicles. Launch site ground operations include numerous operator tasks to prepare the vehicle for launch or to perform preflight maintenance. Ensuring that components requiring operator interaction at the launch site are designed for optimal human use is a high priority for operability. To promote operability, a Design Quality Evaluation Survey based on Universal Design framework was developed to support Human Factors Engineering (HFE) evaluation for NASA s launch vehicles. Universal Design per se is not a priority for launch vehicle processing however; applying principles of Universal Design will increase the probability of an error free and efficient design which promotes operability. The Design Quality Evaluation Survey incorporates and tailors the seven Universal Design Principles and adds new measures for Safety and Efficiency. Adapting an approach proven to measure Universal Design Performance in Product, each principle is associated with multiple performance measures which are rated with the degree to which the statement is true. The Design Quality Evaluation Survey was employed for several launch vehicle ground processing worksite analyses. The tool was found to be most useful for comparative judgments as opposed to an assessment of a single design option. It provided a useful piece of additional data when assessing possible operator interfaces or worksites for operability.

The research of computer network security and protection strategy

NASA Astrophysics Data System (ADS)

He, Jian

2017-05-01

With the widespread popularity of computer network applications, its security is also received a high degree of attention. Factors affecting the safety of network is complex, for to do a good job of network security is a systematic work, has the high challenge. For safety and reliability problems of computer network system, this paper combined with practical work experience, from the threat of network security, security technology, network some Suggestions and measures for the system design principle, in order to make the masses of users in computer networks to enhance safety awareness and master certain network security technology.

Malfunction in Hong Kong's Curriculum Policymaking System: A Case Study of Curriculum Integration

ERIC Educational Resources Information Center

Yin, Shirley Yeung Sze; Chung, Lam Chi

2006-01-01

Designing a curriculum is much more than a technical process. Indeed, it could be called a political activity because stakeholders usually attribute different values to, and hold different expectations from, a new curriculum. As early as 1949, Tyler had raised this issue in his classic "Basic Principles of Curriculum and Instruction."…

Small Farm Grain Storage. Appropriate Technologies for Development. Manual M-2.

ERIC Educational Resources Information Center

Lindblad, Carl; Druben, Laurel

Designed as a working and teaching tool for development workers in their field activities, this manual combines in one volume the basic principles of grain storage and the practical solutions currently being used and tested around the world to combat grain storage problems. Each of six sections begins with informative material on the topic to be…

Distortion of some of the basic principles of public health practice in India.

PubMed

Banerji, Debabar

2006-01-01

India's political leadership has chosen personnel from the Indian Administrative Service cadre of generalist administrators and from the clinician-dominated cadre of the Central Health Services to run the country's health service system. The personnel's inadequate or distorted understanding of some of the basic principles of public health practice--such as developing an epidemiological approach to solving community health problems, choice of appropriate technology, and optimization of health service systems--has had a very deleterious effect on the health service system. These administrators have become vulnerable to manipulation by personnel from international agencies, who also have questionable public health credentials, to create space for imposition of their technocentric, ill-conceived, and ill-designed agenda. To rationalize adoption of such an obviously faulty agenda, they have to be ahistorical, apolitical, and atheoretical and indulge in misinformation, disinformation, and suppression and manipulation of information. This amounts to what Navarro has termed "intellectual fascism."

CADDIS Volume 4. Data Analysis: Basic Principles & Issues

EPA Pesticide Factsheets

Use of inferential statistics in causal analysis, introduction to data independence and autocorrelation, methods to identifying and control for confounding variables, references for the Basic Principles section of Data Analysis.

Student error patterns as a function of curriculum design: teaching fractions to remedial high school students and high school students with learning disabilities.

PubMed

Kelly, B; Gersten, R; Carnine, D

1990-01-01

This study evaluated the relative effectiveness of a curriculum that incorporated three empirically derived principles of curriculum design with a basal approach in teaching basic fractions concepts to students with learning disabilities and other low performing students in high school remedial math classes. The components of effective mathematics instruction articulated by Good and Grouws (1979) were implemented in both conditions. Thus, the curriculum design variables were isolated by keeping all other aspects of instruction constant. Results indicated that, although both programs were reasonably successful in teaching the material, the curriculum program utilizing sophisticated principles of curriculum design was significantly more effective. Mean scores on a curriculum-referenced test were 96.5% for that group and 82.3% for the basal group. Secondary analyses of item clusters revealed that areas of weakness in the performance of the basal group could be directly linked to hypothesized flaws in its curriculum design.

A generalized concept for cost-effective structural design. [Statistical Decision Theory applied to aerospace systems

NASA Technical Reports Server (NTRS)

Thomas, J. M.; Hawk, J. D.

1975-01-01

A generalized concept for cost-effective structural design is introduced. It is assumed that decisions affecting the cost effectiveness of aerospace structures fall into three basic categories: design, verification, and operation. Within these basic categories, certain decisions concerning items such as design configuration, safety factors, testing methods, and operational constraints are to be made. All or some of the variables affecting these decisions may be treated probabilistically. Bayesian statistical decision theory is used as the tool for determining the cost optimum decisions. A special case of the general problem is derived herein, and some very useful parametric curves are developed and applied to several sample structures.

The ethics and economics of consuming Canadian drugs.

PubMed

Seaman, Rachel M H

2005-01-01

Many U.S. citizens are unable to afford prescription medication in their own country, so they purchase them from Canadian pharmacies. This paper examines the ethics of importing drugs from Canada, including economic implications and how physicians should respond to this dilemma. The four basic principles of ethics are balanced by examining financial incentives, current Canadian and U.S. law, safety issues, the burden of research and development, the impact on Canadian physicians, and issues of liability. The paper concludes that the principle of autonomy permits individuals to cross the border and purchase drugs for personal use; however, nonmaleficence prohibits the purchase of these drugs through third parties. In addition, the U.S. government has special obligations to justice and beneficence and may not ethically sponsor the importation of Canadian drugs. Finally, the paper shows that U.S. doctors must not recommend importation on the basis of beneficence and autonomy.

Propellant injection systems and processes

NASA Technical Reports Server (NTRS)

Ito, Jackson I.

1995-01-01

The previous 'Art of Injector Design' is maturing and merging with the more systematic 'Science of Combustion Device Analysis.' This technology can be based upon observation, correlation, experimentation and ultimately analytical modeling based upon basic engineering principles. This methodology is more systematic and far superior to the historical injector design process of 'Trial and Error' or blindly 'Copying Past Successes.' The benefit of such an approach is to be able to rank candidate design concepts for relative probability of success or technical risk in all the important combustion device design requirements and combustion process development risk categories before committing to an engine development program. Even if a single analytical design concept cannot be developed to predict satisfying all requirements simultaneously, a series of risk mitigation key enabling technologies can be identified for early resolution. Lower cost subscale or laboratory experimentation to demonstrate proof of principle, critical instrumentation requirements, and design discriminating test plans can be developed based on the physical insight provided by these analyses.

Principles of Protein Stability and Their Application in Computational Design.

PubMed

Goldenzweig, Adi; Fleishman, Sarel

2018-01-26

Proteins are increasingly used in basic and applied biomedical research.Many proteins, however, are only marginally stable and can be expressed in limited amounts, thus hampering research and applications. Research has revealed the thermodynamic, cellular, and evolutionary principles and mechanisms that underlie marginal stability. With this growing understanding, computational stability design methods have advanced over the past two decades starting from methods that selectively addressed only some aspects of marginal stability. Current methods are more general and, by combining phylogenetic analysis with atomistic design, have shown drastic improvements in solubility, thermal stability, and aggregation resistance while maintaining the protein's primary molecular activity. Stability design is opening the way to rational engineering of improved enzymes, therapeutics, and vaccines and to the application of protein design methodology to large proteins and molecular activities that have proven challenging in the past. Expected final online publication date for the Annual Review of Biochemistry Volume 87 is June 20, 2018. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Protection of Workers and Third Parties during the Construction of Linear Structures

NASA Astrophysics Data System (ADS)

Vlčková, Jitka; Venkrbec, Václav; Henková, Svatava; Chromý, Adam

2017-12-01

The minimization of risk in the workplace through a focus on occupational health and safety (OHS) is one of the primary objectives for every construction project. The most serious accidents in the construction industry occur during work on earthworks and linear structures. The character of such structures places them among those posing the greatest threat to the public (referred to as “third parties”). They can be characterized as large structures whose construction may involve the building site extending in a narrow lane alongside previously constructed objects currently in use by the public. Linear structures are often directly connected to existing objects or buildings, making it impossible to guard the whole construction site. However, many OHS problems related to linear structures can be prevented during the design stage. The aim of this article is to introduce a new methodology which has been implemented into a computer program that deals with safety measures at construction sites where work is performed on linear structures. Based on existing experience with the design of such structures and their execution and supervision by safety coordinators, the basic types of linear structures, their location in the terrain, the conditions present during their execution and other marginal conditions and influences were modelled. Basic safety information has been assigned to this elementary information, which is strictly necessary for the construction process. The safety provisions can be grouped according to type, e.g. technical, organizational and other necessary documentation, or into sets of provisions concerning areas such as construction site safety, transport safety, earthworks safety, etc. The selection of the given provisions takes place using multiple criteria. The aim of creating this program is to provide a practical tool for designers, contractors and construction companies. The model can contribute to the sufficient awareness of these participants about technical and organizational provisions that can help them to meet workplace safety requirements. The software for the selection of safety provisions also contains module that can calculate necessary cost estimates using a calculation formula chosen by the user. All software data conform to European standards harmonized for the Czech Republic.

HFE safety reviews of advanced nuclear power plant control rooms

NASA Technical Reports Server (NTRS)

Ohara, John

1994-01-01

Advanced control rooms (ACR's) will utilize human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role and means of interacting with the system. The Nuclear Regulatory Commission (NRC) reviews the human factors engineering (HFE) aspects of HSI's to ensure that they are designed to good HFE principles and support performance and reliability in order to protect public health and safety. However, the only available NRC guidance was developed more than ten years ago, and does not adequately address the human performance issues and technology changes associated with ACR's. Accordingly, a new approach to ACR safety reviews was developed based upon the concept of 'convergent validity'. This approach to ACR safety reviews is described.

Sociotechnical attributes of safe and unsafe work systems

PubMed Central

Kleiner, Brian M.; Hettinger, Lawrence J.; DeJoy, David M.; Huang, Yuang-Hsiang; Love, Peter E.D.

2015-01-01

Theoretical and practical approaches to safety based on sociotechnical systems principles place heavy emphasis on the intersections between social–organisational and technical–work process factors. Within this perspective, work system design emphasises factors such as the joint optimisation of social and technical processes, a focus on reliable human–system performance and safety metrics as design and analysis criteria, the maintenance of a realistic and consistent set of safety objectives and policies, and regular access to the expertise and input of workers. We discuss three current approaches to the analysis and design of complex sociotechnical systems: human–systems integration, macroergonomics and safety climate. Each approach emphasises key sociotechnical systems themes, and each prescribes a more holistic perspective on work systems than do traditional theories and methods. We contrast these perspectives with historical precedents such as system safety and traditional human factors and ergonomics, and describe potential future directions for their application in research and practice. Practitioner Summary: The identification of factors that can reliably distinguish between safe and unsafe work systems is an important concern for ergonomists and other safety professionals. This paper presents a variety of sociotechnical systems perspectives on intersections between social–organisational and technology–work process factors as they impact work system analysis, design and operation. PMID:25909756

Guiding principles of safety as a basis for developing a pharmaceutical safety culture.

PubMed

Edwards, Brian; Olsen, Axel K; Whalen, Matthew D; Gold, Marla J

2007-05-01

Despite the best efforts of industry and regulatory authorities, the trust of society in the process of medicine development and communication of pharmaceutical risk has ebbed away. In response the US government has called for a culture of compliance while the EU regulators talk of a 'culture of scientific excellence'. However, one of the fundamental problems hindering progress to rebuilding trust based on a pharmaceutical safety culture is the lack of agreement and transparency between all stakeholders as to what is meant by a 'Safety of Medicines'. For that reason, we propose 'Guiding Principles of Safety for Pharmaceuticals' are developed analogous to the way that Chemical Safety has been tackled. A logical starting point would be to examine the Principles outlined by the US Institute of Medicine although we acknowledge that these Principles require further extensive debate and definition. Nevertheless, the Principles should take centre stage in the reform of pharmaceutical development required to restore society's trust.

Advanced Energy Storage Devices: Basic Principles, Analytical Methods, and Rational Materials Design

PubMed Central

Liu, Jilei; Wang, Jin; Xu, Chaohe; Li, Chunzhong; Lin, Jianyi

2017-01-01

Abstract Tremendous efforts have been dedicated into the development of high‐performance energy storage devices with nanoscale design and hybrid approaches. The boundary between the electrochemical capacitors and batteries becomes less distinctive. The same material may display capacitive or battery‐like behavior depending on the electrode design and the charge storage guest ions. Therefore, the underlying mechanisms and the electrochemical processes occurring upon charge storage may be confusing for researchers who are new to the field as well as some of the chemists and material scientists already in the field. This review provides fundamentals of the similarities and differences between electrochemical capacitors and batteries from kinetic and material point of view. Basic techniques and analysis methods to distinguish the capacitive and battery‐like behavior are discussed. Furthermore, guidelines for material selection, the state‐of‐the‐art materials, and the electrode design rules to advanced electrode are proposed. PMID:29375964

Advanced Energy Storage Devices: Basic Principles, Analytical Methods, and Rational Materials Design.

PubMed

Liu, Jilei; Wang, Jin; Xu, Chaohe; Jiang, Hao; Li, Chunzhong; Zhang, Lili; Lin, Jianyi; Shen, Ze Xiang

2018-01-01

Tremendous efforts have been dedicated into the development of high-performance energy storage devices with nanoscale design and hybrid approaches. The boundary between the electrochemical capacitors and batteries becomes less distinctive. The same material may display capacitive or battery-like behavior depending on the electrode design and the charge storage guest ions. Therefore, the underlying mechanisms and the electrochemical processes occurring upon charge storage may be confusing for researchers who are new to the field as well as some of the chemists and material scientists already in the field. This review provides fundamentals of the similarities and differences between electrochemical capacitors and batteries from kinetic and material point of view. Basic techniques and analysis methods to distinguish the capacitive and battery-like behavior are discussed. Furthermore, guidelines for material selection, the state-of-the-art materials, and the electrode design rules to advanced electrode are proposed.

Is three the magic number? The role of ergonomic principles in cross country comprehension of road traffic signs.

PubMed

Jamson, Samantha; Mrozek, Marco

2017-07-01

Road sign comprehension plays an important part in road safety management, particularly for those drivers who are travelling in an unfamiliar country. Previous research has established that comprehension can be improved if signs are designed to adhere to ergonomic principles. However, it may be difficult for sign designers to incorporate all the principles into a single sign and may thus have to make a judgement as to the most effective ones. This study surveyed drivers in three countries to ascertain their understanding of a range of road signs, each of which conformed in varying degrees and combinations to the ergonomic principles. We found that using three of the principles was the most effective and that the most important one was that relating to standardisation; the colours and shapes used were key to comprehension. Other concepts which related to physical and spatial characteristics were less important, whilst conceptual compatibility did not aid comprehension at all. Practitioner Summary: This study explores how road sign comprehension can be improved using ergonomic principles, with particular reference to cross-border drivers. It was found that comprehension can be improved significantly if standardisation is adhered to and if at least three principles are used.

Safe Use of Hydrogen and Hydrogen Systems

NASA Technical Reports Server (NTRS)

Maes, Miguel

2006-01-01

This is a viewgraph presentation that is a course for teaching the safe use of hydrogen. The objectives of the course are 1. To familiarize the student with H2 safety properties 2. To enable the identification, evaluations and addressing of H2 system hazards 3. To teach: a. Safe practices for, b. Design, c. Materials selection, d. H2 system operation, e. Physical principles and empirical observations on which these safe practices are based, f. How to respond to emergency situations involving H2, g How to visualize safety concepts through in-class exercises, h. Identify numerous parameters important to H2 safety.

Local positioning with sensor-enabled passive multistandard RFID transponders

NASA Astrophysics Data System (ADS)

Heidrich, J.; Brenk, D.; Essel, J.; Schwarzer, S.; Herschmann, R.; Geck, B.; Fischer, G.; Weigel, R.

2010-11-01

RFID is used today in many fields of every day life like access control, anti-theft protection or logistics. Within this article a short overview of the basic RFID principles and the EPC protocol flow is given at first. Afterwards new design approaches for RFID systems within the scope of the research project RFID-S are presented.

A family of BAPTAs for GEO and LEO applications

NASA Technical Reports Server (NTRS)

Auer, W.

1989-01-01

The application of a Bearing and Power Transfer Assembly (BAPTA) to a Solar Array Drive for communications satellites is presented. The basic principles which were used as guidelines for design and development are developed and the three main subassemblies are described in detail. The results of vibration qualification and thermal vacuum life tests are included.

INSTRUCTIONAL TELEVISION FOR THE LOWER PRIMARY. A TEACHER GUIDE, SEMESTER II.

ERIC Educational Resources Information Center

PELIKAN, ALFRED; AND OTHERS

PROGRAMS FOR THE LOWER PRIMARY GROUP WERE IN ART, MUSIC AND PHYSICAL EDUCATION. A PREVIEW OF THE CONTENT OF EACH TELECAST WAS GIVEN WITH DETAILED INFORMATION FOR FOLLOWUP ACTIVITIES. THE STRUCTURE OF THE ART PROGRAM INCLUDED THE FUNDAMENTAL PRINCIPLES APPLICABLE TO SUCH BASIC AREAS AS LINE DRAWING, PICTURE MAKING, DESIGN AND CONSTRUCTION WITH THE…

CRISPR/Cas system for yeast genome engineering: advances and applications

PubMed Central

Stovicek, Vratislav; Holkenbrink, Carina

2017-01-01

Abstract The methods based on the clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated (Cas) system have quickly gained popularity for genome editing and transcriptional regulation in many organisms, including yeast. This review aims to provide a comprehensive overview of CRISPR application for different yeast species: from basic principles and genetic design to applications. PMID:28505256

The methodology of database design in organization management systems

NASA Astrophysics Data System (ADS)

Chudinov, I. L.; Osipova, V. V.; Bobrova, Y. V.

2017-01-01

The paper describes the unified methodology of database design for management information systems. Designing the conceptual information model for the domain area is the most important and labor-intensive stage in database design. Basing on the proposed integrated approach to design, the conceptual information model, the main principles of developing the relation databases are provided and user’s information needs are considered. According to the methodology, the process of designing the conceptual information model includes three basic stages, which are defined in detail. Finally, the article describes the process of performing the results of analyzing user’s information needs and the rationale for use of classifiers.

Continuous/Batch Mg/MgH2/H2O-Based Hydrogen Generator

NASA Technical Reports Server (NTRS)

Kindler, Andrew; Huang, Yuhong

2010-01-01

A proposed apparatus for generating hydrogen by means of chemical reactions of magnesium and magnesium hydride with steam would exploit the same basic principles as those discussed in the immediately preceding article, but would be designed to implement a hybrid continuous/batch mode of operation. The design concept would simplify the problem of optimizing thermal management and would help to minimize the size and weight necessary for generating a given amount of hydrogen.

Study design and hierarchy of evidence for surgical decision making.

PubMed

Sprague, Sheila; McKay, Paula; Thoma, Achilleas

2008-04-01

This article provides a historical overview of the hierarchy of evidence for surgical decision making and discusses key study designs in the hierarchy of evidence. This encompasses meta-analyses, randomized controlled trials, and observational studies, including cohort and case-controlled studies, case series and case reports, and basic science studies. This article also reviews the principles and importance of evidence-based plastic surgery and describes several systems to rate the strength of the scientific evidence.

SWATTER (Space-Based Weapons against Tactical TErrestrial-Based Resources): A Design for Integrating Space into a Theater Level Wargame

DTIC Science & Technology

1991-12-01

are inevitable when examining space assets. The purpose of this thesis was to develop the computer program design of a low resolution waigame to ...occurred. In accordance with basic physical principles, the populatiOII inversion is unstable and will spontaneously degenerate to the lower enei y state...sensor resolution , false observations, and missed observations (40:7). During the time of observation, the tracking accuracy will improve due to

Medical education research for radiologists: a road map for developing a project.

PubMed

Gaetke-Udager, Kara; Yablon, Corrie M

2015-04-01

Medical education research is challenging to do well, but researchers can develop a robust project with knowledge of basic principles. Thoughtful creation of a study question, development of a conceptual framework, and attention to study design are crucial to developing a successful project. A thorough understanding of research methods and elements of survey design is necessary. Projects that result in changes to behavior, clinical practice, and patient outcomes have the most potential for success.

Acidic and basic drugs in medicinal chemistry: a perspective.

PubMed

Charifson, Paul S; Walters, W Patrick

2014-12-11

The acid/base properties of a molecule are among the most fundamental for drug action. However, they are often overlooked in a prospective design manner unless it has been established that a certain ionization state (e.g., quaternary base or presence of a carboxylic acid) appears to be required for activity. In medicinal chemistry optimization programs it is relatively common to attenuate basicity to circumvent undesired effects such as lack of biological selectivity or safety risks such as hERG or phospholipidosis. However, teams may not prospectively explore a range of carefully chosen compound pKa values as part of an overall chemistry strategy or design hypothesis. This review summarizes the potential advantages and disadvantages of both acidic and basic drugs and provides some new analyses based on recently available public data.

History of the Army Ground Forces. Study Number 35. Army Ground Forces and the Air-Ground Battle Team Including Organic Light Aviation

DTIC Science & Technology

1948-01-01

Army, acted as such in addition to other duties. 2. From the first, the histor was designed -rimarily for the Army. Its object is to give an account of...June 1942. -M 100-15 laid "wn as basic the principle that "successful modern military opera- tions demand air supc.iority.Ŗ It prescribed that "the...4 On the issue of control in cambined air-ground operations, FM 100-15 contained only broad declarations of principle . It stated: "All caubat

Fundamentals of Cryogenics

NASA Technical Reports Server (NTRS)

Johnson, Wesley; Tomsik, Thomas; Moder, Jeff

2014-01-01

Analysis of the extreme conditions that are encountered in cryogenic systems requires the most effort out of analysts and engineers. Due to the costs and complexity associated with the extremely cold temperatures involved, testing is sometimes minimized and extra analysis is often relied upon. This short course is designed as an introduction to cryogenic engineering and analysis, and it is intended to introduce the basic concepts related to cryogenic analysis and testing as well as help the analyst understand the impacts of various requests on a test facility. Discussion will revolve around operational functions often found in cryogenic systems, hardware for both tests and facilities, and what design or modelling tools are available for performing the analysis. Emphasis will be placed on what scenarios to use what hardware or the analysis tools to get the desired results. The class will provide a review of first principles, engineering practices, and those relations directly applicable to this subject including such topics as cryogenic fluids, thermodynamics and heat transfer, material properties at low temperature, insulation, cryogenic equipment, instrumentation, refrigeration, testing of cryogenic systems, cryogenics safety and typical thermal and fluid analysis used by the engineer. The class will provide references for further learning on various topics in cryogenics for those who want to dive deeper into the subject or have encountered specific problems.

Nondestructive Testing Eddy Current Basic Principles RQA/M1-5330.12 (V-I).

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Huntsville, AL. George C. Marshall Space Flight Center.

As one in the series of programmed instruction handbooks, prepared by the U.S. space program, home study material is presented in this volume concerning familiarization and orientation on basic eddy current principles. The subject is presented under the following headings: Basic Eddy Current Concepts, Eddy Current Generation and Distribution,…

Advanced Test Reactor Safety Basis Upgrade Lessons Learned Relative to Design Basis Verification and Safety Basis Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

G. L. Sharp; R. T. McCracken

The Advanced Test Reactor (ATR) is a pressurized light-water reactor with a design thermal power of 250 MW. The principal function of the ATR is to provide a high neutron flux for testing reactor fuels and other materials. The reactor also provides other irradiation services such as radioisotope production. The ATR and its support facilities are located at the Test Reactor Area of the Idaho National Engineering and Environmental Laboratory (INEEL). An audit conducted by the Department of Energy's Office of Independent Oversight and Performance Assurance (DOE OA) raised concerns that design conditions at the ATR were not adequately analyzedmore » in the safety analysis and that legacy design basis management practices had the potential to further impact safe operation of the facility.1 The concerns identified by the audit team, and issues raised during additional reviews performed by ATR safety analysts, were evaluated through the unreviewed safety question process resulting in shutdown of the ATR for more than three months while these concerns were resolved. Past management of the ATR safety basis, relative to facility design basis management and change control, led to concerns that discrepancies in the safety basis may have developed. Although not required by DOE orders or regulations, not performing design basis verification in conjunction with development of the 10 CFR 830 Subpart B upgraded safety basis allowed these potential weaknesses to be carried forward. Configuration management and a clear definition of the existing facility design basis have a direct relation to developing and maintaining a high quality safety basis which properly identifies and mitigates all hazards and postulated accident conditions. These relations and the impact of past safety basis management practices have been reviewed in order to identify lessons learned from the safety basis upgrade process and appropriate actions to resolve possible concerns with respect to the current ATR safety basis. The need for a design basis reconstitution program for the ATR has been identified along with the use of sound configuration management principles in order to support safe and efficient facility operation.« less

Unsatisfied basic needs of older patients in emergency care environments - obstacles to an active role in decision making.

PubMed

Nydén, Kristoffer; Petersson, Martin; Nyström, Maria

2003-03-01

Little attention is paid in Emergency Care Units (ECUs) in Sweden to the special needs of older people. The aim of this study was thus to analyse older people's basic needs in the emergency care environment. The study was carried out with a life-world interpretative approach, and the theoretical framework for interpretation was Abraham Maslow's theory of motivation and personality. Seven informants aged between 65 and 88 years, with various experiences of being patients with urgent as well as non-urgent health-related problems, were interviewed about their experiences of ECU care. Their basic needs at the lower levels of Maslow's hierarchy were well-represented in the data. Higher needs, such as desire to know and understand, appeared to be totally neglected. Safety needs dominated the whole situation. Our conclusion is that standards of care must be developed in Sweden to make older patients feel safer and more secure in ECUs. Furthermore, the principles of nursing care for older patients need to be defined in order to encourage them to take an active part in their own health process.

Assessment of Battery Technology for Rail Propulsion Application

DOT National Transportation Integrated Search

2017-08-01

The study's authors conducted a review of various battery chemistries, including information on basic electrochemistry and the critical parameters that drive battery design and sizing. The authors examined the performance, life cycle, and safety of l...

Enhancing clinical evidence by proactively building quality into clinical trials.

PubMed

Meeker-O'Connell, Ann; Glessner, Coleen; Behm, Mark; Mulinde, Jean; Roach, Nancy; Sweeney, Fergus; Tenaerts, Pamela; Landray, Martin J

2016-08-01

Stakeholders across the clinical trial enterprise have expressed concern that the current clinical trial enterprise is unsustainable. The cost and complexity of trials have continued to increase, threatening our ability to generate reliable evidence essential for making appropriate decisions concerning the benefits and harms associated with clinical interventions. Overcoming this inefficiency rests on improving protocol design, trial planning, and quality oversight. The Clinical Trials Transformation Initiative convened a project to evaluate methods to prospectively build quality into the scientific and operational design of clinical trials ("quality-by-design"), such that trials are feasible to conduct and important errors are prevented rather than remediated. A working group evaluated aspects of trial design and oversight and developed the Clinical Trials Transformation Initiative quality-by-design principles document, outlining a series of factors generally relevant to the reliability of trial conclusions and to patient safety. These principles were then applied and further refined during a series of hands-on workshops to evaluate their utility in facilitating proactive, cross-functional dialogue, and decision-making about trial design and planning. Following these workshops, independent qualitative interviews were conducted with 19 workshop attendees to explore the potential challenges for implementing a quality-by-design approach to clinical trials. The Clinical Trials Transformation Initiative project team subsequently developed recommendations and an online resource guide to support implementation of this approach. The Clinical Trials Transformation Initiative quality-by-design principles provide a framework for assuring that clinical trials adequately safeguard participants and provide reliable information on which to make decisions on the effects of treatments. The quality-by-design workshops highlighted the value of active discussions incorporating the different perspectives within and external to an organization (e.g. clinical investigators, research site staff, and trial participants) in improving trial design. Workshop participants also recognized the value of focusing oversight on those aspects of the trial where errors would have a major impact on participant safety and reliability of results. Applying the Clinical Trials Transformation Initiative quality-by-design recommendations and principles should enable organizations to prioritize the most critical determinants of a trial's quality, identify non-essential activities that can be eliminated to streamline trial conduct and oversight, and formulate appropriate plans to define, avoid, mitigate, monitor, and address important errors. © The Author(s) 2016.

Critical Thinking Handbook: High School. A Guide for Redesigning Instruction.

ERIC Educational Resources Information Center

Paul, Richard; And Others

This handbook, designed to help high school teachers remodel their lesson plans, has one basic objective: to demonstrate that it is possible and practical to integrate instruction for critical thinking into the teaching of all subjects. The handbook discusses the concept of critical thinking and the principles that underlie it and shows how…

Freshmen Marketing: A First-Year Experience with Experiential Learning

ERIC Educational Resources Information Center

Greene, Henry

2011-01-01

This paper describes an experiential learning activity designed for a New England university freshmen course, BUS101-Marketing First-Year Experience (FYE). The purpose of the activity is to teach basic principles of marketing, develop a general perspective of business, and provide FYE activities that facilitate the college transition. The specific…

Educational Uses of Cartridge Tapes. Dissemination Document No. 11.

ERIC Educational Resources Information Center

Levine, S. Joseph

Tape cartridges for use by special education teachers are analyzed according to design, effective use, and availability. Basic operating principles of cassette and continuous loop tape cartridges are described and illustrated. Advantages of tape cartridges are indicated, such as the following: the position is saved on tape during student timeouts,…

Crop Production Handbook for Peace Corps Volunteers. Appropriate Technologies for Development. Reprint R-6.

ERIC Educational Resources Information Center

1982

This manual, prepared for use by Peace Corps volunteers, provides background information and practical knowledge about crop production. The manual is designed to convey insights into basic crop production, principles, and practices. Primary emphasis is given to providing explanations and illustrations of soil, plant, and water relationships as…

The Effects of POWERSOURCE[C] Intervention on Student Understanding of Basic Mathematical Principles. CRESST Report 763

ERIC Educational Resources Information Center

Phelan, Julia; Choi, Kilchan; Vendlinski, Terry; Baker, Eva L.; Herman, Joan L.

2009-01-01

This report describes results from field-testing of POWERSOURCE[C] formative assessment alongside professional development and instructional resources. The researchers at the National Center for Research, on Evaluation, Standards, & Student Testing (CRESST) employed a randomized, controlled design to address the following question: Does the…

Module Cluster: TTP-001.00 (GSC) Reinforcement Principles for Classroom Use.

ERIC Educational Resources Information Center

Brent, George

The purpose of this module cluster is to enable students to define the basic operant terms, to state the basic operant principles, to read operant measurement charts, and to use operant principles in elementary classrooms with both social and academic behaviors. It is intended for use by teacher education students with the cooperation of an…

eBug--teaching children hygiene principles using educational games.

PubMed

Kostkova, Patty; Farrell, David; de Quincey, Ed; Weinberg, Julius; Lecky, Donna; McNulty, Cliodna

2010-01-01

Technology enhanced education has been recently established as a new approach for all stages of education. However, among these new IT media it is computer games playing the central role in delivering education in particular to children and teenagers, however, real world sound evaluation is often given little attention. The EU funded e-Bug project developed web games aimed at children to teach basic principles of prudent antibiotics use, hand and respiratory hygiene and aims to reinforces an awareness of microbes, hand and respiratory hygiene among junior and senior school children in 10 countries in Europe. An educational pack implemented in schools across Europe is complemented by Internet web games for two age groups teaching a set of learning objectives (LOs) using a fast and interactive platform game design for junior children and investigate detective games based on PBL principles for senior children. In this paper, we present the design of e-Bug junior and senior games and evaluation results.

Development of a modified Hess-Murray law for non-Newtonian fluids in bifurcating micro-channels

NASA Astrophysics Data System (ADS)

Emerson, David; Barber, Robert

2012-11-01

Microfluidic manifolds frequently require the use of bifurcating channels and these can be used to create precise concentration gradients for chemical applications. More recently, novel devices have been attempting to replicate vasculatures or bronchial structures occurring in nature with the goal of creating artificial bifurcations that mimic the basic principles of designs found in nature. In previous work, we have used the biological principles behind the Hess-Murray Law, where bifurcating structures exhibit a constant stress profile and follow a third-power rule, to enable rectangular or trapezoidal micro-channels to be fabricated using conventional lithographic or wet-etching techniques. Using biological principles to design man made devices is generally referred to as biomimetics and this approach has found success in a range of new and emerging topics. However, our previous work was limited to Newtonian flows. More recently, we have used the Rabinovitsch-Mooney equation to be able to extend our analysis to non-Newtonian fluids. This has allowed us to develop a new rule that can provide a design criterion to predict channel dimensions for non-Newtonian flows obeying a constant stress biological principle. The Engineering and Physical Sciences Research Council for support of CCP12 and Programme Grant award (grant number EP/I011927/1).

Movement and Drama in Therapy: The Therapeutic Use of Movement, Drama and Music.

ERIC Educational Resources Information Center

Wethered, Audrey

Basic principles in body movement, drama, and music therapy for the emotionally disturbed are explored in this text. Various approaches to therapy are illustrated by accounts of individuals and groups with whom the author has worked. A list of musical pieces, with notes on possible application in therapy, is also included. The book is designed to…

Applying principles from safety science to improve child protection.

PubMed

Cull, Michael J; Rzepnicki, Tina L; O'Day, Kathryn; Epstein, Richard A

2013-01-01

Child Protective Services Agencies (CPSAs) share many characteristics with other organizations operating in high-risk, high-profile industries. Over the past 50 years, industries as diverse as aviation, nuclear power, and healthcare have applied principles from safety science to improve practice. The current paper describes the rationale, characteristics, and challenges of applying concepts from the safety culture literature to CPSAs. Preliminary efforts to apply key principles aimed at improving child safety and well-being in two states are also presented.

Variable focus photographic lens without mechanical movements

NASA Astrophysics Data System (ADS)

Chen, Jiabi; Peng, Runling; Zhuang, Songlin

2007-09-01

A novel design of a zoom lens system without motorized movements is proposed. The lens system consists of a fixed lens and two double-liquid variable-focus lenses. The liquid lenses, made out of two immiscible liquids, are based on the principle of electrowetting: an effect controlling the wetting properties of a liquid on a solid by modifying the applied voltage at the solid-liquid interface. The structure and principle of the lens system are introduced in this paper. And detailed calculations and simulation examples are presented to predict how two liquid lenses are related to meet the basic requirements of zoom lenses.

Dos and Don'ts in Designing an Annual Financial Report Project: "A Teacher's Perspective"

ERIC Educational Resources Information Center

Dockter, DuWayne L.

2013-01-01

The principle purpose of this article serves a number of purposes. Among them, it provides instructors with a tested financial statement report project. It also helps students to develop higher-level learning skills. In addition, the project provides an opportunity for students to apply their basic accounting knowledge to the analysis and use of…

Detection of Fe[superscript 3+] and Al[superscript 3+] by Test Paper

ERIC Educational Resources Information Center

Li, Lili; Xiang, Haifeng; Zhou, Xiangge; Li, Menglong; Wu, Di

2012-01-01

A porphyrin-based test paper has been designed and prepared. It can be used to analyze for Al[superscript 3+] and Fe[superscript 3+] in aqueous solution. An experiment employing the test paper can help students understand basic principles of spectrophotometry and how spectrophotometry is used in analyzing for metal ions. (Contains 1 scheme and 1…

Teaching Guide and Problem Supplement. A Publication of the Exemplary Project Problem Solving Computer Style 1969-1970.

ERIC Educational Resources Information Center

New Orleans Public Schools, LA.

Secondary school teachers incorporating the use of a computer in algebra, trigonometry, advanced mathematics, chemistry, or physics classes are the individuals for whom this book is intended. The content included in it is designed to aid the learning of programing techniques and basic scientific or mathematical principles, and to offer some…

Comprehensive Erosion and Sediment Control Training Program for Engineers, Architects and Planners.

ERIC Educational Resources Information Center

Porter, Harry L., Jr.

This program training text was designed to provide uniform instruction to the engineer, architect, planner, and others who will be helping to implement an erosion and sediment control program. Although tailored for use in Virginia, the basic principles covered are universal, and the material is adaptable to meet the needs in any State. The 11…

Electrician (AFSC 54250).

ERIC Educational Resources Information Center

Air Univ., Gunter AFS, Ala. Extension Course Inst.

This three-volume student text is designed for use by Air Force personnel enrolled in a self-study extension course for electricians. Covered in the individual volumes are general subjects (career progression, resource management, supervision and training, and safety and first aid); basic electricity and installation of electrical systems (basic…

eduSPIM: Light Sheet Microscopy in the Museum.

PubMed

Jahr, Wiebke; Schmid, Benjamin; Weber, Michael; Huisken, Jan

2016-01-01

Light sheet microscopy (or selective plane illumination microscopy) is an important imaging technique in the life sciences. At the same time, this technique is also ideally suited for community outreach projects, because it produces visually appealing, highly dynamic images of living organisms and its working principle can be understood with basic optics knowledge. Still, the underlying concepts are widely unknown to the non-scientific public. On the occasion of the UNESCO International Year of Light, a technical museum in Dresden, Germany, launched a special, interactive exhibition. We built a fully functional, educational selective plane illumination microscope (eduSPIM) to demonstrate how developments in microscopy promote discoveries in biology. To maximize educational impact, we radically reduced a standard light sheet microscope to its essential components without compromising functionality and incorporated stringent safety concepts beyond those needed in the lab. Our eduSPIM system features one illumination and one detection path and a sealed sample chamber. We image fixed zebrafish embryos with fluorescent vasculature, because the structure is meaningful to laymen and visualises the optical principles of light sheet microscopy. Via a simplified interface, visitors acquire fluorescence and transmission data simultaneously. The universal concepts presented here may also apply to other scientific approaches that are communicated to laymen in interactive settings. The specific eduSPIM design is adapted easily for various outreach and teaching activities. eduSPIM may even prove useful for labs needing a simple SPIM. A detailed parts list and schematics to rebuild eduSPIM are provided.

Safety envelope for load tolerance of structural element design based on multi-stage testing

DOE PAGES

Park, Chanyoung; Kim, Nam H.

2016-09-06

Structural elements, such as stiffened panels and lap joints, are basic components of aircraft structures. For aircraft structural design, designers select predesigned elements satisfying the design load requirement based on their load-carrying capabilities. Therefore, estimation of safety envelope of structural elements for load tolerances would be a good investment for design purpose. In this article, a method of estimating safety envelope is presented using probabilistic classification, which can estimate a specific level of failure probability under both aleatory and epistemic uncertainties. An important contribution of this article is that the calculation uncertainty is reflected in building a safety envelope usingmore » Gaussian process, and the effect of element test data on reducing the calculation uncertainty is incorporated by updating the Gaussian process model with the element test data. It is shown that even one element test can significantly reduce the calculation uncertainty due to lacking knowledge of actual physics, so that conservativeness in a safety envelope is significantly reduced. The proposed approach was demonstrated with a cantilever beam example, which represents a structural element. The example shows that calculation uncertainty provides about 93% conservativeness against the uncertainty due to a few element tests. As a result, it is shown that even a single element test can increase the load tolerance modeled with the safety envelope by 20%.« less

Dynamic sealing principles

NASA Technical Reports Server (NTRS)

Zuk, J.

1976-01-01

The fundamental principles governing dynamic sealing operation are discussed. Different seals are described in terms of these principles. Despite the large variety of detailed construction, there appear to be some basic principles, or combinations of basic principles, by which all seals function, these are presented and discussed. Theoretical and practical considerations in the application of these principles are discussed. Advantages, disadvantages, limitations, and application examples of various conventional and special seals are presented. Fundamental equations governing liquid and gas flows in thin film seals, which enable leakage calculations to be made, are also presented. Concept of flow functions, application of Reynolds lubrication equation, and nonlubrication equation flow, friction and wear; and seal lubrication regimes are explained.

Three basic principles of success.

PubMed

Levin, Roger

2003-06-01

Basic business principles all but ensure success when they are followed consistently. Putting strategies, objectives and tactics in place is the first step toward being able to document systems, initiate scripting and improve staff training. Without the basic steps, systems, scripting and training the practice for performance would be hit or miss, at best. More importantly, applying business principles ensures that limited practice resources are dedicated to the achievement of the strategy. By following this simple, three-step process, a dental practice can significantly enhance both financial success and dentist and staff satisfaction.

New Simulation Methods to Facilitate Achieving a Mechanistic Understanding of Basic Pharmacology Principles in the Classroom

ERIC Educational Resources Information Center

Grover, Anita; Lam, Tai Ning; Hunt, C. Anthony

2008-01-01

We present a simulation tool to aid the study of basic pharmacology principles. By taking advantage of the properties of agent-based modeling, the tool facilitates taking a mechanistic approach to learning basic concepts, in contrast to the traditional empirical methods. Pharmacodynamics is a particular aspect of pharmacology that can benefit from…

OSHA--what is its role in dentistry and how do we provide training?

PubMed

Basquill, Linda C; Govoni, Mary; Bednarsh, Helene

2005-03-01

The mission of the Occupational Safety and Health Administration (OSHA) is to ensure the safety and health of America's workers. Although OSHA's focus is on safety, there is a natural overlap into the infection control arena. The work practice control, engineering control, and personal protective equipment regulations are examples of OSHA safety topics that have a direct impact on dental infection control. In a similar fashion, the regulations designed to protect the dental health care worker often translate into increased safety for the dental patient. To ensure their safety, OSHA requires workers to be appropriately trained. This article reviews the regulatory significance of OSHA, compares OSHA with other regulatory and advisory agencies, and discusses OSHA's training requirements. Principles for conducting training in the dental health care setting along with suggestions for assessing training also are presented.

Adapting Dialectical Behavior Therapy for the Treatment of Dissociative Identity Disorder.

PubMed

Foote, Brad; Van Orden, Kim

2016-12-31

Dialectical Behavior Therapy (DBT), created by Marsha Linehan, has been shown to be an effective therapy for the treatment of borderline personality disorder (BPD) and for suicidal and self-harming behavior. Dissociative identity disorder (DID) is a complex post-traumatic disorder which is highly comorbid with BPD, shares a number of clinical features with BPD, and which like BPD features a high degree of suicidality. The DID treatment literature emphasizes the importance of a staged approach, beginning with the creation of a safe therapeutic frame prior to addressing traumatic material; DBT is also a staged treatment, in which behavioral and safety issues are addressed in Stage 1, and trauma work reserved for Stage 2. The authors describe adapting DBT, and especially its techniques for Stage 1 safety work, for work with DID patients. Basic theoretical principles are described and illustrated with a case example.

[Safety in the Microbiology laboratory].

PubMed

Rojo-Molinero, Estrella; Alados, Juan Carlos; de la Pedrosa, Elia Gómez G; Leiva, José; Pérez, José L

2015-01-01

The normal activity in the laboratory of microbiology poses different risks - mainly biological - that can affect the health of their workers, visitors and the community. Routine health examinations (surveillance and prevention), individual awareness of self-protection, hazard identification and risk assessment of laboratory procedures, the adoption of appropriate containment measures, and the use of conscientious microbiological techniques allow laboratory to be a safe place, as records of laboratory-acquired infections and accidents show. Training and information are the cornerstones for designing a comprehensive safety plan for the laboratory. In this article, the basic concepts and the theoretical background on laboratory safety are reviewed, including the main legal regulations. Moreover, practical guidelines are presented for each laboratory to design its own safety plan according its own particular characteristics. Copyright © 2014 Elsevier España, S.L.U. y Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

Process safety improvement--quality and target zero.

PubMed

Van Scyoc, Karl

2008-11-15

Process safety practitioners have adopted quality management principles in design of process safety management systems with positive effect, yet achieving safety objectives sometimes remain a distant target. Companies regularly apply tools and methods which have roots in quality and productivity improvement. The "plan, do, check, act" improvement loop, statistical analysis of incidents (non-conformities), and performance trending popularized by Dr. Deming are now commonly used in the context of process safety. Significant advancements in HSE performance are reported after applying methods viewed as fundamental for quality management. In pursuit of continual process safety improvement, the paper examines various quality improvement methods, and explores how methods intended for product quality can be additionally applied to continual improvement of process safety. Methods such as Kaizen, Poke yoke, and TRIZ, while long established for quality improvement, are quite unfamiliar in the process safety arena. These methods are discussed for application in improving both process safety leadership and field work team performance. Practical ways to advance process safety, based on the methods, are given.

Advanced thermionic energy conversion

NASA Technical Reports Server (NTRS)

Britt, E. J.; Fitzpatrick, G. D.; Hansen, L. K.; Rasor, N. S.

1974-01-01

Basic analytical and experimental exploration was conducted on several types of advanced thermionic energy converters, and preliminary analysis was performed on systems utilizing advanced converter performance. The Pt--Nb cylindrical diode which exhibited a suppressed arc drop, as described in the preceding report, was reassembled and the existence of the postulated hydrid mode of operation was tentatively confirmed. Initial data obtained on ignited and unignited triode operation in the demountable cesium vapor system essentially confirmed the design principles developed in earlier work, with a few exceptions. Three specific advanced converter concepts were selected as candidates for concentrated basic study and for practical evaluation in fixed-configuration converters. Test vehicles and test stands for these converters and a unique controlled-atmosphere station for converter assembly and processing were designed, and procurement was initiated.

WORK SAFETY CONDITIONS WITH CLOSED RADIATION SOURCES (in Polish)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brosziewicz, R.

1963-01-01

A discussion is presented of principles of radiological protection observed in the Radiation Chemistry Dept. of the Nuclear Research Inst., during operation of large sources of ionizing radiation. It has been revealed that a properly designed servicing system of these sources ensures full protection of personnel even with not fully protected sources. (auth)

Participatory design of a preliminary safety checklist for general practice

PubMed Central

Bowie, Paul; Ferguson, Julie; MacLeod, Marion; Kennedy, Susan; de Wet, Carl; McNab, Duncan; Kelly, Moya; McKay, John; Atkinson, Sarah

2015-01-01

Background The use of checklists to minimise errors is well established in high reliability, safety-critical industries. In health care there is growing interest in checklists to standardise checking processes and ensure task completion, and so provide further systemic defences against error and patient harm. However, in UK general practice there is limited experience of safety checklist use. Aim To identify workplace hazards that impact on safety, health and wellbeing, and performance, and codesign a standardised checklist process. Design and setting Application of mixed methods to identify system hazards in Scottish general practices and develop a safety checklist based on human factors design principles. Method A multiprofessional ‘expert’ group (n = 7) and experienced front-line GPs, nurses, and practice managers (n = 18) identified system hazards and developed and validated a preliminary checklist using a combination of literature review, documentation review, consensus building workshops using a mini-Delphi process, and completion of content validity index exercise. Results A prototype safety checklist was developed and validated consisting of six safety domains (for example, medicines management), 22 sub-categories (for example, emergency drug supplies) and 78 related items (for example, stock balancing, secure drug storage, and cold chain temperature recording). Conclusion Hazards in the general practice work system were prioritised that can potentially impact on the safety, health and wellbeing of patients, GP team members, and practice performance, and a necessary safety checklist prototype was designed. However, checklist efficacy in improving safety processes and outcomes is dependent on user commitment, and support from leaders and promotional champions. Although further usability development and testing is necessary, the concept should be of interest in the UK and internationally. PMID:25918338

Fault Management Design Strategies

NASA Technical Reports Server (NTRS)

Day, John C.; Johnson, Stephen B.

2014-01-01

Development of dependable systems relies on the ability of the system to determine and respond to off-nominal system behavior. Specification and development of these fault management capabilities must be done in a structured and principled manner to improve our understanding of these systems, and to make significant gains in dependability (safety, reliability and availability). Prior work has described a fundamental taxonomy and theory of System Health Management (SHM), and of its operational subset, Fault Management (FM). This conceptual foundation provides a basis to develop framework to design and implement FM design strategies that protect mission objectives and account for system design limitations. Selection of an SHM strategy has implications for the functions required to perform the strategy, and it places constraints on the set of possible design solutions. The framework developed in this paper provides a rigorous and principled approach to classifying SHM strategies, as well as methods for determination and implementation of SHM strategies. An illustrative example is used to describe the application of the framework and the resulting benefits to system and FM design and dependability.

41 CFR 102-80.10 - What are the basic safety and environmental management policies for real property?

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety and environmental management policies for real property? 102-80.10 Section 102-80.10 Public... MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT General Provisions § 102-80.10 What are the basic safety and environmental management policies for real property? The basic safety and...

Binary phase locked loops for Omega receivers

NASA Technical Reports Server (NTRS)

Chamberlin, K.

1974-01-01

An all-digital phase lock loop (PLL) is considered because of a number of problems inherent in an employment of analog PLL. The digital PLL design presented solves these problems. A single loop measures all eight Omega time slots. Memory-aiding leads to the name of this design, the memory-aided phase lock loop (MAPLL). Basic operating principles are discussed and the superiority of MAPLL over the conventional digital phase lock loop with regard to the operational efficiency for Omega applications is demonstrated.

The New Generation Russian VLBI Network

NASA Technical Reports Server (NTRS)

Finkelstein, Andrey; Ipatov, Alexander; Smolentsev, Sergey; Mardyshkin, Vyacheslav; Fedotov, Leonid; Surkis, Igor; Ivanov, Dmitrij; Gayazov, Iskander

2010-01-01

This paper deals with a new project of the Russian VLBI Network dedicated for Universal Time determinations in quasi on-line mode. The basic principles of the network design and location of antennas are explained. Variants of constructing receiving devices, digital data acquisition system, and phase calibration system are specially considered. The frequency ranges and expected values of noise temperature are given.

The A [plus] B [double arrow] C of Chemical Thermodynamics.

ERIC Educational Resources Information Center

Gerhartl, F. J.

1994-01-01

Basic chemical thermodynamics usually treats non-p,T reactions in a stepmotherly fashion. This paper covers the main aspects of the theoretical principles of reactions (p,T; V,T; p,H; and V,U) and offers results from the ABC computer program, which was designed to show the validity of the equilibrium theory to all types of reaction modes. (PVD)

E-Learning, Multiple Intelligences Theory (MI) and Learner-Centred Instruction: Adapting MI Learning Theoretical Principles to the Instruction of Health and Safety to Construction Managers

ERIC Educational Resources Information Center

McNamee, Paul; Madden, Dave; McNamee, Frank; Wall, John; Hurst, Alan; Vrasidas, Charalambos; Chanquoy, Lucile; Baccino, Thierry; Acar, Emrah; Onwy-Yazici, Ela; Jordan, Ann

2009-01-01

This paper describes an ongoing EU project concerned with developing an instructional design framework for virtual classes (VC) that is based on the theory of Multiple Intelligences (MI) (1983). The psychological theory of Multiple Intelligences (Gardner 1983) has received much credence within instructional design since its inception and has been…

Is Model-Based Development a Favorable Approach for Complex and Safety-Critical Computer Systems on Commercial Aircraft?

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2014-01-01

A system is safety-critical if its failure can endanger human life or cause significant damage to property or the environment. State-of-the-art computer systems on commercial aircraft are highly complex, software-intensive, functionally integrated, and network-centric systems of systems. Ensuring that such systems are safe and comply with existing safety regulations is costly and time-consuming as the level of rigor in the development process, especially the validation and verification activities, is determined by considerations of system complexity and safety criticality. A significant degree of care and deep insight into the operational principles of these systems is required to ensure adequate coverage of all design implications relevant to system safety. Model-based development methodologies, methods, tools, and techniques facilitate collaboration and enable the use of common design artifacts among groups dealing with different aspects of the development of a system. This paper examines the application of model-based development to complex and safety-critical aircraft computer systems. Benefits and detriments are identified and an overall assessment of the approach is given.

Design and Experimental Results for a Natural-Laminar-Flow Airfoil for General Aviation Applications

NASA Technical Reports Server (NTRS)

Somers, D. M.

1981-01-01

A natural-laminar-flow airfoil for general aviation applications, the NLF(1)-0416, was designed and analyzed theoretically and verified experimentally in the Langley Low-Turbulence Pressure Tunnel. The basic objective of combining the high maximum lift of the NASA low-speed airfoils with the low cruise drag of the NACA 6-series airfoils was achieved. The safety requirement that the maximum lift coefficient not be significantly affected with transition fixed near the leading edge was also met. Comparisons of the theoretical and experimental results show excellent agreement. Comparisons with other airfoils, both laminar flow and turbulent flow, confirm the achievement of the basic objective.

75 FR 8239 - School Food Safety Program Based on Hazard Analysis and Critical Control Point Principles (HACCP...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... 0584-AD65 School Food Safety Program Based on Hazard Analysis and Critical Control Point Principles... Safety Program Based on Hazard Analysis and Critical Control Point Principles (HACCP) was published on... of Management and Budget (OMB) cleared the associated information collection requirements (ICR) on...

Canoeing.

ERIC Educational Resources Information Center

Little, Mildred J.; Smith, Carole F.

Designed to be used in conjunction with the book "Canoeing", published by the American Red Cross in 1977, the teaching packet provides assistance in organizing and teaching a basic canoeing class. The packet lists 20 class objectives and details essential and recommended equipment and safety precautions. The packet contains a 15-day unit…

Evaluation on Living Public Spaces and Their Qualities - Case Study from Ankara Konur, Karanfil and Yüksel Streets

NASA Astrophysics Data System (ADS)

Gürer, Nilüfer; Imren Güzel, Burcu; Kavak, Ibrahim

2017-10-01

Public spaces constitute one of the main elements of the living cities. They stand out as places reflecting the social structure of the society and the past values. They appear as the places one can observe the changes and modernity of the society as well as socializing places. Following to private and semi-private spaces, public spaces such as streets, squares and parks provide people a chance to be together and contact with each other. In living and vibrant places with these random appointments they feel that they belong to social urban life. Therefore, well-designed living public spaces are important indicators of the quality of life and user satisfaction. In the scope of this paper the basic principles and design criteria that create living public spaces and their effects on user satisfaction are discussed. By analysing the spatial reflections of used design criteria it is aimed to relate the existing arrangements to user satisfaction. For these analysis, Yüksel Street located at Kızılay Square in Ankara centre and side streets of Karanfil and Konur (all car-free) were selected as case study area. This area is one of the most important and most densely used pedestrian zone of the capital with its green pattern, location and crossroads. At the beginning, basic design criteria and implementation methods are detailed with the literature survey. Then basic criteria and design principles are verified by using field studies including a survey with randomly asked 270 questionnaires. For defining the user satisfaction and bringing out the qualifications and failures in the case study area user surveys are analysed by field study observations and SPSS Statistics software. Finally, practical suggestions which are believed to be useful for this type of public places in developing and less developed countries are proposed

Basic principles, methodology, and applications of remote sensing in agriculture

NASA Technical Reports Server (NTRS)

Moreira, M. A. (Principal Investigator); Deassuncao, G. V.

1984-01-01

The basic principles of remote sensing applied to agriculture and the methods used in data analysis are described. Emphasis is placed on the importance of developing a methodology that may help crop forecast, basic concepts of spectral signatures of vegetation, the methodology of the LANDSAT data utilization in agriculture, and the remote sensing program application of INPE (Institute for Space Research) in agriculture.

Un regard international sur la sécurité nucléaire

NASA Astrophysics Data System (ADS)

Birkhofer, Adolf

2002-10-01

Safety has always been an important objective in nuclear technology. Starting with a set of sound physical principles and prudent design approaches, safety concepts have gradually been refined and cover now a wide range of provisions related to design, quality and operation. Research, the evaluation of operating experiences and probabilistic risk assessments constitute an essential basis and international co-operation plays a significant role in that context. Concerning future developments a major objective for new reactor concepts, such as the EPR, is to practically exclude a severe core damage accident with large scale consequences outside the plant. To cite this article: A. Birkhofer, C. R. Physique 3 (2002) 1059-1065.

Thrombocytopenia

MedlinePlus

... EJ, Silberstein LE, et al, eds. Hematology: Basic Principles and Practice . 7th ed. Philadelphia, PA: Elsevier; 2018: ... EJ, Silberstein LE, et al, eds. Hematology: Basic Principles and Practice . 7th ed. Philadelphia, PA: Elsevier; 2018: ...

Introducing Proper Chemical Hygiene and Safety in the General Chemistry Curriculum

NASA Astrophysics Data System (ADS)

Miller, Gordon J.; Heideman, Stephen A.; Greenbowe, Thomas J.

2000-09-01

Chemical safety is an important component of science education for everyone, not just for chemistry majors. Developing a responsible and knowledgeable attitude towards chemical safety best starts at the early stages of a student's career. In many colleges and universities, safety education in undergraduate chemistry has been relegated primarily to a few regulatory documents at the beginning of a laboratory course, or an occasional warning in the description of a specific experiment in a prelaboratory lecture. Safety issues are seldom raised in general chemistry or organic chemistry lecture-based chemistry courses. At Iowa State University we have begun to implement a program, Chemical Hygiene and Safety in the Laboratory, into the undergraduate chemistry curriculum. This program is designed to increase the awareness and knowledge of proper chemical hygiene and laboratory safety issues among all students taking general chemistry and organic chemistry courses. Laboratory protocol, use of safety equipment, familiarity with MSD sheets, basics of first aid, some specific terminology surrounding chemical hygiene, EPA and OSHA requirements, and the use of the World Wide Web to search and locate chemical safety information are topics that are applied throughout the chemistry curriculum. The novelty of this approach is to incorporate MSD sheets and safety information that can be located on the World Wide Web in a series of safety problems and assignments, all related to the chemistry experiments students are about to perform. The fundamental idea of our approach is not only to teach students what is required for appropriate safety measures, but also to involve them in the enforcement of basic prudent practices.

Using Participatory Action Research to Develop a Working Model That Enhances Psychiatric Nurses' Professionalism: The Architecture of Stability.

PubMed

Salzmann-Erikson, Martin

2017-11-01

Ward rules in psychiatric care aim to promote safety for both patients and staff. Simultaneously, ward rules are associated with increased patient violence, leading to neither a safe work environment nor a safe caring environment. Although ward rules are routinely used, few studies have explicitly accounted for their impact. To describe the process of a team development project considering ward rule issues, and to develop a working model to empower staff in their daily in-patient psychiatric nursing practices. The design of this study is explorative and descriptive. Participatory action research methodology was applied to understand ward rules. Data consists of audio-recorded group discussions, observations and field notes, together creating a data set of 556 text pages. More than 100 specific ward rules were identified. In this process, the word rules was relinquished in favor of adopting the term principles, since rules are inconsistent with a caring ideology. A linguistic transition led to the development of a framework embracing the (1) Principle of Safety, (2) Principle of Structure and (3) Principle of Interplay. The principles were linked to normative guidelines and applied ethical theories: deontology, consequentialism and ethics of care. The work model reminded staff about the principles, empowered their professional decision-making, decreased collegial conflicts because of increased acceptance for individual decisions, and, in general, improved well-being at work. Furthermore, the work model also empowered staff to find support for their decisions based on principles that are grounded in the ethics of totality.

VESL: Vocational English as a Second Language. Focus: Electronics.

ERIC Educational Resources Information Center

Scales, Virginia

These instructional materials are designed to help non-English speaking students in electronics classes to improve their knowledge of English. Covered in the six units are the following topics: safety, hand tools, measuring electricity, component identification, component function, and basic soldering. The lessons include readings, vocabulary…

Tutorial on X-Ray Free-Electron Lasers

DOE PAGES

Carlsten, Bruce E.

2018-05-02

This article provides a tutorial on X-ray free-electron lasers (XFELs) which are currently being designed, built, commissioned, and operated as fourth-generation light sources to enable discovery science in materials science, biology, and chemistry. XFELs are complex devices, driven by high-energy, high-brightness electron accelerators and cost on the order of $B. Here, we provide a basic introduction to their operating physics and a description of their main accelerator components. To make their basic operating principle accessible to the electrical engineering community, we rederive the FEL dispersion relation in a manner similar to that done for traveling-wave tubes. We finish with sectionsmore » describing some unique features of the X-rays generated and on the physics that lead to the main design limitations, including approaches for mitigation.« less

Tutorial on X-Ray Free-Electron Lasers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlsten, Bruce E.

This article provides a tutorial on X-ray free-electron lasers (XFELs) which are currently being designed, built, commissioned, and operated as fourth-generation light sources to enable discovery science in materials science, biology, and chemistry. XFELs are complex devices, driven by high-energy, high-brightness electron accelerators and cost on the order of $B. Here, we provide a basic introduction to their operating physics and a description of their main accelerator components. To make their basic operating principle accessible to the electrical engineering community, we rederive the FEL dispersion relation in a manner similar to that done for traveling-wave tubes. We finish with sectionsmore » describing some unique features of the X-rays generated and on the physics that lead to the main design limitations, including approaches for mitigation.« less

Adapting Dialectical Behavior Therapy for the Treatment of Dissociative Identity Disorder

PubMed Central

Foote, Brad; Van Orden, Kim

2017-01-01

Dialectical Behavior Therapy, created by Marsha Linehan, has been shown to be an effective therapy for the treatment of borderline personality disorder (BPD) and for suicidal and self-harming behavior. Dissociative identity disorder (DID) is a complex post-traumatic disorder which is highly comorbid with BPD, shares a number of clinical features with BPD, and which like BPD features a high degree of suicidality. The DID treatment literature emphasizes the importance of a staged approach, beginning with the creation of a safe therapeutic frame prior to addressing traumatic material; DBT is also a staged treatment, where behavioral and safety issues are addressed in Stage 1 and trauma work reserved for Stage 2. The authors describe adapting DBT, and especially its techniques for Stage 1 safety work, for work with DID patients. Basic theoretical principles are described and illustrated with a case example. PMID:28068498