Endobronchial valves for bronchopleural fistula: pitfalls and principles

PubMed Central

Gaspard, Dany; Bartter, Thaddeus; Boujaoude, Ziad; Raja, Haroon; Arya, Rohan; Meena, Nikhil; Abouzgheib, Wissam

2016-01-01

Background: Placement of endobronchial valves for bronchopleural fistula (BPF) is not always straightforward. A simple guide to the steps for an uncomplicated procedure does not encompass pitfalls that need to be understood and overcome to maximize the efficacy of this modality. Objectives: The objective of this study was to discuss examples of difficult cases for which the placement of endobronchial valves was not straightforward and required alterations in the usual basic steps. Subsequently, we aimed to provide guiding principles for a successful procedure. Methods: Six illustrative cases were selected to demonstrate issues that can arise during endobronchial valve placement. Results: In each case, a real or apparent lack of decrease in airflow through a BPF was diagnosed and addressed. We have used the selected problem cases to illustrate principles, with the goal of helping to increase the success rate for endobronchial valve placement in the treatment of BPF. Conclusions: This series demonstrates issues that complicate effective placement of endobronchial valves for BPF. These issues form the basis for troubleshooting steps that complement the basic procedural steps. PMID:27742781

Retraining walking adaptability following incomplete spinal cord injury.

PubMed

Fox, Emily J; Tester, Nicole J; Butera, Katie A; Howland, Dena R; Spiess, Martina R; Castro-Chapman, Paula L; Behrman, Andrea L

2017-01-01

Functional walking requires the ability to modify one's gait pattern to environmental demands and task goals-gait adaptability. Following incomplete spinal cord injury (ISCI), gait rehabilitation such as locomotor training (Basic-LT) emphasizes intense, repetitive stepping practice. Rehabilitation approaches focusing on practice of gait adaptability tasks have not been established for individuals with ISCIs but may promote recovery of higher level walking skills. The primary purpose of this case series was to describe and determine the feasibility of administering a gait adaptability retraining approach-Adapt-LT-by comparing the dose and intensity of Adapt-LT to Basic-LT. Three individuals with ISCIs (>1 year, AIS C or D) completed three weeks each (15 sessions) of Basic-LT and Adapt-LT. Interventions included practice on a treadmill with body weight support and practice overground (≥30 mins total). Adapt-LT focused on speed changes, obstacle negotiation, and backward walking. Training parameters (step counts, speeds, perceived exertion) were compared and outcomes assessed pre and post interventions. Based on completion of the protocol and similarities in training parameters in the two interventions, it was feasible to administer Adapt-LT with a similar dosage and intensity as Basic-LT. Additionally, the participants demonstrated gains in walking function and balance following each training type. Rehabilitation that includes stepping practice with adaptability tasks is feasible for individuals with ISCIs. Further investigation is needed to determine the efficacy of Adapt-LT.

5 CFR 531.405 - Waiting periods for within-grade increase.

Code of Federal Regulations, 2011 CFR

2011-01-01

... step 4-260 days of creditable service in a pay status over a period of not less than 52 calendar weeks... step 4-52 calendar weeks of creditable service; (ii) Rate of basic pay equal to or greater than the rate of basic pay at step 4 and less than the rate of basic pay at step 7-104 calendar weeks of...

Estimating allowable-cut by area-scheduling

Treesearch

William B. Leak

2011-01-01

Estimation of the regulated allowable-cut is an important step in placing a forest property under management and ensuring a continued supply of timber over time. Regular harvests also provide for the maintenance of needed wildlife habitat. There are two basic approaches: (1) volume, and (2) area/volume regulation, with many variations of each. Some require...

Basic Energy Conservation and Management--Part 2: HVAC

ERIC Educational Resources Information Center

Krueger, Glenn

2012-01-01

Reducing school district energy expenditures has become a universal goal, and new technologies have brought greater energy efficiencies to the school environment. In Part 1 of this two-part series, the author discussed the steps required to establish an energy conservation and management program with an emphasis on lighting. In this article, he…

The Competencies, Preparations, and Challenging (New) Roles of Online Instructors

ERIC Educational Resources Information Center

Arah, Benjamin O.

2012-01-01

This paper is a discussion about the basic preparatory steps and necessary competencies for making the transition from a traditional face-to-face to a full online teaching and learning, and it is intended to highlight the required pedagogical roles of an online instructor using an interactive computer-enhanced asynchronous information…

The Prone Protected Posture

DTIC Science & Technology

1980-08-01

5K 2. METHODOLOGY . . . . . . . . . . . . . . . . . . . . 5 3. RESULTS . . . . . . . . . . . . . . . . . . . . . . 23I 4...2. METHODOLOGY The first step required in this study was to characterize the prone protected posture. Basically, a man in the prone posture differs...reduction in the presented area of target personnel. Reference 6 contains a concise discussion of the methodology used to generate the shielding functions

Wildlife Habitat Improvement Guide for Minnesota Youth.

ERIC Educational Resources Information Center

Halsey, Clifton

This publication outlines projects to increase wildlife, primarily fowl and deer, and to help rural youth better understand wildlife requirements. The publication outlines six basic steps that are involved in initiating a wildlife project. These are: (1) Determine the types of wild animals for which the land is best suited; (2) Study the life…

Classic Nuclear Localization Signals and a Novel Nuclear Localization Motif Are Required for Nuclear Transport of Porcine Parvovirus Capsid Proteins

PubMed Central

Boisvert, Maude; Bouchard-Lévesque, Véronique; Fernandes, Sandra

2014-01-01

ABSTRACT Nuclear targeting of capsid proteins (VPs) is important for genome delivery and precedes assembly in the replication cycle of porcine parvovirus (PPV). Clusters of basic amino acids, corresponding to potential nuclear localization signals (NLS), were found only in the unique region of VP1 (VP1up, for VP1 unique part). Of the five identified basic regions (BR), three were important for nuclear localization of VP1up: BR1 was a classic Pat7 NLS, and the combination of BR4 and BR5 was a classic bipartite NLS. These NLS were essential for viral replication. VP2, the major capsid protein, lacked these NLS and contained no region with more than two basic amino acids in proximity. However, three regions of basic clusters were identified in the folded protein, assembled into a trimeric structure. Mutagenesis experiments showed that only one of these three regions was involved in VP2 transport to the nucleus. This structural NLS, termed the nuclear localization motif (NLM), is located inside the assembled capsid and thus can be used to transport trimers to the nucleus in late steps of infection but not for virions in initial infection steps. The two NLS of VP1up are located in the N-terminal part of the protein, externalized from the capsid during endosomal transit, exposing them for nuclear targeting during early steps of infection. Globally, the determinants of nuclear transport of structural proteins of PPV were different from those of closely related parvoviruses. IMPORTANCE Most DNA viruses use the nucleus for their replication cycle. Thus, structural proteins need to be targeted to this cellular compartment at two distinct steps of the infection: in early steps to deliver viral genomes to the nucleus and in late steps to assemble new viruses. Nuclear targeting of proteins depends on the recognition of a stretch of basic amino acids by cellular transport proteins. This study reports the identification of two classic nuclear localization signals in the minor capsid protein (VP1) of porcine parvovirus. The major protein (VP2) nuclear localization was shown to depend on a complex structural motif. This motif can be used as a strategy by the virus to avoid transport of incorrectly folded proteins and to selectively import assembled trimers into the nucleus. Structural nuclear localization motifs can also be important for nuclear proteins without a classic basic amino acid stretch, including multimeric cellular proteins. PMID:25078698

5 CFR 531.405 - Waiting periods for within-grade increase.

Code of Federal Regulations, 2010 CFR

2010-01-01

... step 4-52 calendar weeks of creditable service; (ii) Rate of basic pay equal to or greater than the... creditable service; and (iii) Rate of basic pay equal to or greater than the rate of basic pay at step 7-156... step 4-260 days of creditable service in a pay status over a period of not less than 52 calendar weeks...

The actual development of European Aviation Safety Requirements in Aviation Medicine: Prospects of Future EASA Requirements

PubMed Central

Siedenburg, J

2009-01-01

Common Rules for Aviation Safety had been developed under the aegis of the Joint Aviation Authorities in the 1990ies. In 2002 the Basic Regulation 1592/2002 was the founding document of a new entity, the European Aviation Safety Agency. Areas of activity were Certification and Maintenance of aircraft. On 18 March the new Basic Regulation 216/2008, repealing the original Basic Regulation was published and applicable from 08 April on. The included Essential Requirements extended the competencies of EASA inter alia to Pilot Licensing and Flight Operations. The future aeromedical requirements will be included as Annex II in another Implementing Regulation on Personnel Licensing. The detailed provisions will be published as guidance material. The proposals for these provisions have been published on 05 June 2008 as NPA 2008- 17c. After public consultation, processing of comments and final adoption the new proposals may be applicable form the second half of 2009 on. A transition period of four year will apply. Whereas the provisions are based on Joint Awiation Requirement - Flight Crew Licensing (JAR-FCL) 3, a new Light Aircraft Pilot Licence (LAPL) project and the details of the associated medical certification regarding general practitioners will be something new in aviation medicine. This paper consists of 6 sections. The introduction outlines the idea of international aviation safety. The second section describes the development of the Joint Aviation Authorities (JAA), the first step to common rules for aviation safety in Europe. The third section encompasses a major change as next step: the foundation of the European Aviation Safety Agency (EASA) and the development of its rules. In the following section provides an outline of the new medical requirements. Section five emphasizes the new concept of a Leisure Pilot Licence. The last section gives an outlook on ongoing rulemaking activities and the opportunities of the public to participate in them. PMID:19561781

The actual development of European aviation safety requirements in aviation medicine: prospects of future EASA requirements.

PubMed

Siedenburg, J

2009-04-01

Common Rules for Aviation Safety had been developed under the aegis of the Joint Aviation Authorities in the 1990s. In 2002 the Basic Regulation 1592/2002 was the founding document of a new entity, the European Aviation Safety Agency. Areas of activity were Certification and Maintenance of aircraft. On 18 March the new Basic Regulation 216/2008, repealing the original Basic Regulation was published and applicable from 08 April on. The included Essential Requirements extended the competencies of EASA inter alia to Pilot Licensing and Flight Operations. The future aeromedical requirements will be included as Annex II in another Implementing Regulation on Personnel Licensing. The detailed provisions will be published as guidance material. The proposals for these provisions have been published on 05 June 2008 as NPA 2008- 17c. After public consultation, processing of comments and final adoption the new proposals may be applicable form the second half of 2009 on. A transition period of four year will apply. Whereas the provisions are based on Joint Aviation Requirement-Flight Crew Licensing (JAR-FCL) 3, a new Light Aircraft Pilot Licence (LAPL) project and the details of the associated medical certification regarding general practitioners will be something new in aviation medicine. This paper consists of 6 sections. The introduction outlines the idea of international aviation safety. The second section describes the development of the Joint Aviation Authorities (JAA), the first step to common rules for aviation safety in Europe. The third section encompasses a major change as next step: the foundation of the European Aviation Safety Agency (EASA) and the development of its rules. In the following section provides an outline of the new medical requirements. Section five emphasizes the new concept of a Leisure Pilot Licence. The last section gives an outlook on ongoing rulemaking activities and the opportunities of the public to participate in them.

Cost analysis of oxygen recovery systems

NASA Technical Reports Server (NTRS)

Yakut, M. M.

1973-01-01

The design and development of equipment for flight use in earth-orbital programs, when optimally approached cost effectively, proceed through the following logical progression: (1) bench testing of breadboard designs, (2) the fabrication and evaluation of prototype equipment, (3) redesign to meet flight-imposed requirements, and (4) qualification and testing of a flight-ready system. Each of these steps is intended to produce the basic design information necessary to progress to the next step. The cost of each step is normally substantially less than that of the following step. An evaluation of the cost elements involved in each of the steps and their impact on total program cost are presented. Cost analyses of four leading oxygen recovery subsystems which include two carbon dioxide reduction subsystem, Sabatier and Bosch, and two water electrolysis subsystems, the solid polymer electrolyte and the circulating KOH electrolyte are described.

Current Practices in Teaching Introductory Epidemiology: How We Got Here, Where to Go

PubMed Central

Keyes, Katherine M.; Galea, Sandro

2014-01-01

The number of students and disciplines requiring basic instruction in epidemiologic methods is growing. As a field, we now have a lexicon of epidemiologic terminology and particular methods that have developed and become canonical through the historical development of the field. Yet, many of our basic concepts remain elusive to some students, particularly those not pursuing a career in epidemiology. Further, disagreement and redundancy across basic terms limit their utility in teaching epidemiology. Many approaches to teaching epidemiology generally start with labeling key concepts and then move on to explain them. We submit that an approach grounded not in labels but in foundational concepts may offer a useful adjunct to introductory epidemiology education. We propose 7 foundational steps in conducting an epidemiologic study and provide examples of how these steps can be operationalized, using simple graphics that articulate how populations are defined, samples are selected, and individuals are followed to count cases. A reorganization of introductory epidemiology around core first principles may be an effective way forward for educating the next generation of public health scientists. PMID:25190677

Defining and incorporating basic nursing care actions into the electronic health record.

PubMed

Englebright, Jane; Aldrich, Kelly; Taylor, Cathy R

2014-01-01

To develop a definition of basic nursing care for the hospitalized adult patient and drive uptake of that definition through the implementation of an electronic health record. A team of direct care nurses, assisted by subject matter experts, analyzed nursing theory and regulatory requirements related to basic nursing care. The resulting list of activities was coded using the Clinical Care Classification (CCC) system and incorporated into the electronic health record system of a 170-bed community hospital. Nine basic nursing care activities were identified as a result of analyzing nursing theory and regulatory requirements in the framework of a hypothetical "well" patient. One additional basic nursing care activity was identified following the pilot implementation in the electronic health record. The pilot hospital has successfully passed a post-implementation regulatory review with no recommendations related to the documentation of basic patient care. This project demonstrated that it is possible to define the concept of basic nursing care and to distinguish it from the interdisciplinary, problem-focused plan of care. The use of the electronic health record can help clarify, document, and communicate basic care elements and improve uptake among nurses. This project to define basic nursing care activities and incorporate into the electronic health record represents a first step in capturing meaningful data elements. When fully implemented, these data could be translated into knowledge for improving care outcomes and collaborative processes. © 2013 Sigma Theta Tau International.

Analysis of Decision Factors for the Application of Information Access Controls within the Organization

ERIC Educational Resources Information Center

Foerster, Carl A.

2013-01-01

The application of access controls on internal information necessarily impacts the availability of that information for sharing inside the enterprise. The decisions establishing the degree of control are a crucial first step to balance the requirements to protect and share. This research develops a set of basic decision factors and examines other…

Paradox and Promise in Citizenship Education: A Reaction to Butts and Hartoonian.

ERIC Educational Resources Information Center

Leming, James S.

The basic paradox of citizenship education in the United States is that the first steps toward the rational, autonomous, critical-minded citizen required by a democracy are necessarily non-rational and based on an unquestioned deference to authority. The movement from the morality of authority to the morality of principle constitutes the challenge…

Optical coating in space

NASA Technical Reports Server (NTRS)

Bunner, A. N.

1983-01-01

A technological appraisal of the steps required to approach the goal of in-situ optical coating, cleaning and re-coating the optical elements of a remote telescope in space is reported. Emphasis is placed on the high ultraviolet throughput that a telescope using bare aluminum mirrors would offer. A preliminary design is suggested for an Orbital Coating Laboratory to answer basic technical questions.

Four Commandments for Writing Policies for Public-Access Wireless Networks

ERIC Educational Resources Information Center

Sauers, Michael

2006-01-01

In this article, the author describes what components should be included in a comprehensive policy for public wireless usage in a library. He lists four basic steps, which include: (1) Introduce the service; (2) List the technical requirements; (3) Spell out disclaimers on access, assistance, and liability; and (4) Alert users to security concerns.

Basic Casting from A to Z. Student's Instruction Booklet.

ERIC Educational Resources Information Center

Zebco, Tulsa, OK.

A profusely illustrated student instruction booklet contains step-by-step directions and diagrams for learning four basic casting techniques. Separate sections cover basic spin-casting, spinning, bait-casting, and fly-casting. Each section details recommended equipment (reel, rod, line, plug, tackle, lures, leaders, flies), describes specific…

Cardiac multidetector computed tomography: basic physics of image acquisition and clinical applications.

PubMed

Bardo, Dianna M E; Brown, Paul

2008-08-01

Cardiac MDCT is here to stay. And, it is more than just imaging coronary arteries. Understanding the differences in and the benefits of one CT scanner from another will help you to optimize the capabilities of the scanner, but requires a basic understanding of the MDCT imaging physics.This review provides key information needed to understand the differences in the types of MDCT scanners, from 64 - 320 detectors, flat panels, single and dual source configurations, step and shoot prospective and retrospective gating, and how each factor influences radiation dose, spatial and temporal resolution, and image noise.

Introduction to cell culture.

PubMed

Philippeos, Christina; Hughes, Robin D; Dhawan, Anil; Mitry, Ragai R

2012-01-01

The basics of cell culture as applied to human cells are discussed. Biosafety when working with human tissue, which is often pathogenic, is important. The requirements for a tissue culture laboratory are described, particularly the range of equipment needed to carry out cell isolation, purification, and culture. Steps must be taken to maintain aseptic conditions to prevent contamination of cultures with micro-organisms. Basic cell-handling techniques are discussed, including choice of media, primary culture, and cryopreservation of cells so they can be stored for future use. Common assays which are used to determine cell viability and activity are considered.

Step 1: Human System Interface (HSI) Functional Requirements Document (FRD). Version 2

NASA Technical Reports Server (NTRS)

2006-01-01

This Functional Requirements Document (FRD) establishes a minimum set of Human System Interface (HSI) functional requirements to achieve the Access 5 Vision of "operating High Altitude, Long Endurance (HALE) Unmanned Aircraft Systems (UAS) routinely, safely, and reliably in the National Airspace System (NAS)". Basically, it provides what functions are necessary to fly UAS in the NAS. The framework used to identify the appropriate functions was the "Aviate, Navigate, Communicate, and Avoid Hazards" structure identified in the Access 5 FRD. As a result, fifteen high-level functional requirements were developed. In addition, several of them have been decomposed into low-level functional requirements to provide more detail.

Building Jobs, Rebuilding Lives: Placing Ex-Offenders with Employers in the Residential and Light Commercial Construction Industry.

ERIC Educational Resources Information Center

Home Builders Inst., Washington, DC.

This guide presents a focused, structured method of facilitating ex-offender employment. Section 1 takes classic marketing techniques and adapts them to the needs of the particular situation, placing ex-offenders in meaningful employment. The set of specific requirements for creating a workable marketing plan is condensed to six basic steps that…

VICAR image processing system guide to system use

NASA Technical Reports Server (NTRS)

Seidman, J. B.

1977-01-01

The functional characteristics and operating requirements of the VICAR (Video Image Communication and Retrieval) system are described. An introduction to the system describes the functional characteristics and the basic theory of operation. A brief description of the data flow as well as tape and disk formats is also presented. A formal presentation of the control statement formats is given along with a guide to usage of the system. The guide provides a step-by-step reference to the creation of a VICAR control card deck. Simple examples are employed to illustrate the various options and the system response thereto.

5 CFR 531.406 - Creditable service.

Code of Federal Regulations, 2010 CFR

2010-01-01

... pay is equal to or greater than the rate of basic pay for step 4 of the applicable grade and less than... period for an employee whose rate of basic pay is equal to or greater than the rate of basic pay for step....406 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY UNDER THE...

[Cost-conscious medical decisions. Normative guidance within the conflicting demands of ethics and economics].

PubMed

Marckmann, G; In der Schmitten, J

2014-05-01

Under the current conditions in the health care system, physicians inevitably have to take responsibility for the cost dimension of their decisions on the level of single cases. This article, therefore, discusses the question how physicians can integrate cost considerations into their clinical decisions at the microlevel in a medically rational and ethically justified way. We propose a four-step model for "ethical cost-consciousness": (1) forego ineffective interventions as required by good evidence-based medicine, (2) respect individual patient preferences, (3) minimize the diagnostic and therapeutic effort to achieve a certain treatment goal, and (4) forego expensive interventions that have only a small or unlikely (net) benefit for the patient. Steps 1-3 are ethically justified by the principles of beneficence, nonmaleficence, and respect for autonomy, step 4 by the principles of justice. For decisions on step 4, explicit cost-conscious guidelines should be developed locally or regionally. Following the four-step model can contribute to ethically defensible, cost-conscious decision-making at the microlevel. In addition, physicians' rationing decisions should meet basic standards of procedural fairness. Regular cost-case discussions and clinical ethics consultation should be available as decision support. Implementing step 4, however, requires first of all a clear political legitimation with the corresponding legal framework.

Application of the Virginia STEPS (Student/Teacher Education Planning System) by Basic Skills Education Teachers.

ERIC Educational Resources Information Center

Seguin, Barbara; Swanson, Lois

The Virginia STEPS (Student/Teacher Education Planning System) was developed to enable adult basic education (ABE) students to become independent learners responsible for planning, carrying out, evaluating, and making adjustments in their education. ABE instructors at Blackhawk Technical College in Wisconsin have adapted the STEPS model to make…

Molecular mechanism of ERK dephosphorylation by striatal-enriched protein tyrosine phosphatase (STEP)

PubMed Central

Li, Hui; Li, Kang-shuai; Su, Jing; Chen, Lai-Zhong; Xu, Yun-Fei; Wang, Hong-Mei; Gong, Zheng; Cui, Guo-Ying; Yu, Xiao; Wang, Kai; Yao, Wei; Xin, Tao; Li, Min-Yong; Xiao, Kun-Hong; An, Xiao-fei; Huo, Yuqing; Xu, Zhi-gang; Sun, Jin-Peng; Pang, Qi

2013-01-01

Striatal-enriched tyrosine phosphatase (STEP) is an important regulator of neuronal synaptic plasticity, and its abnormal level or activity contributes to cognitive disorders. One crucial downstream effector and direct substrate of STEP is extracellular signal-regulated protein kinase (ERK), which has important functions in spine stabilisation and action potential transmission. The inhibition of STEP activity toward phospho-ERK has the potential to treat neuronal diseases, but the detailed mechanism underlying the dephosphorylation of phospho-ERK by STEP is not known. Therefore, we examined STEP activity toward pNPP, phospho-tyrosine-containing peptides, and the full-length phospho-ERK protein using STEP mutants with different structural features. STEP was found to be a highly efficient ERK tyrosine phosphatase that required both its N-terminal regulatory region and key residues in its active site. Specifically, both KIM and KIS of STEP were required for ERK interaction. In addition to the N-terminal KIS region, S245, hydrophobic residues L249/L251, and basic residues R242/R243 located in the KIM region were important in controlling STEP activity toward phospho-ERK. Further kinetic experiments revealed subtle structural differences between STEP and HePTP that affected the interactions of their KIMs with ERK. Moreover, STEP recognised specific positions of a phospho-ERK peptide sequence through its active site, and the contact of STEP F311 with phospho-ERK V205 and T207 were crucial interactions. Taken together, our results not only provide the information for interactions between ERK and STEP, but will also help in the development of specific strategies to target STEP-ERK recognition, which could serve as a potential therapy for neurological disorders. PMID:24117863

Minimalist Design of Allosterically Regulated Protein Catalysts.

PubMed

Makhlynets, O V; Korendovych, I V

2016-01-01

Nature facilitates chemical transformations with exceptional selectivity and efficiency. Despite a tremendous progress in understanding and predicting protein function, the overall problem of designing a protein catalyst for a given chemical transformation is far from solved. Over the years, many design techniques with various degrees of complexity and rational input have been developed. Minimalist approach to protein design that focuses on the bare minimum requirements to achieve activity presents several important advantages. By focusing on basic physicochemical properties and strategic placing of only few highly active residues one can feasibly evaluate in silico a very large variety of possible catalysts. In more general terms minimalist approach looks for the mere possibility of catalysis, rather than trying to identify the most active catalyst possible. Even very basic designs that utilize a single residue introduced into nonenzymatic proteins or peptide bundles are surprisingly active. Because of the inherent simplicity of the minimalist approach computational tools greatly enhance its efficiency. No complex calculations need to be set up and even a beginner can master this technique in a very short time. Here, we present a step-by-step protocol for minimalist design of functional proteins using basic, easily available, and free computational tools. © 2016 Elsevier Inc. All rights reserved.

Composting. Sludge Treatment and Disposal Course #166. Instructor's Guide [and] Student Workbook.

ERIC Educational Resources Information Center

Arasmith, E. E.

Composting is a lesson developed for a sludge treatment and disposal course. The lesson discusses the basic theory of composting and the basic operation, in a step-by-step sequence, of the two typical composting procedures: windrow and forced air static pile. The lesson then covers basic monitoring and operational procedures. The instructor's…

The reliability and preliminary validity of game-based fall risk assessment in community-dwelling older adults.

PubMed

Yamada, Minoru; Aoyama, Tomoki; Nakamura, Masatoshi; Tanaka, Buichi; Nagai, Koutatsu; Tatematsu, Noriatsu; Uemura, Kazuki; Nakamura, Takashi; Tsuboyama, Tadao; Ichihashi, Noriaki

2011-01-01

The purpose of this study was to examine whether the Nintendo Wii Fit program could be used for fall risk assessment in healthy, community-dwelling older adults. Forty-five community-dwelling older women participated in this study. The "Basic Step" and "Ski Slalom" modules were selected from the Wii Fit game program. The following 5 physical performance tests were performed: the 10-m walk test under single- and dual-task conditions, the Timed Up and Go test under single- and dual-task conditions, and the Functional Reach test. Compared with the faller group, the nonfaller group showed a significant difference in the Basic Step (P < .001) and a nonsignificant difference in the Ski Slalom (P = .453). The discriminating criterion between the 2 groups was a score of 111 points on the Basic Step (P < .001). The Basic Step showed statistically significant, moderate correlations between the dual-task lag of walking (r = -.547) and the dual-task lag of the Timed Up and Go test (r = -.688). These results suggest that game-based fall risk assessment using the Basic Step has a high generality and is useful in community-dwelling older adults. Copyright © 2011 Mosby, Inc. All rights reserved.

A Computational Model of Human Table Tennis for Robot Application

NASA Astrophysics Data System (ADS)

Mülling, Katharina; Peters, Jan

Table tennis is a difficult motor skill which requires all basic components of a general motor skill learning system. In order to get a step closer to such a generic approach to the automatic acquisition and refinement of table tennis, we study table tennis from a human motor control point of view. We make use of the basic models of discrete human movement phases, virtual hitting points, and the operational timing hypothesis. Using these components, we create a computational model which is aimed at reproducing human-like behavior. We verify the functionality of this model in a physically realistic simulation of a Barrett WAM.

Three basic principles of success.

PubMed

Levin, Roger

2003-06-01

Basic business principles all but ensure success when they are followed consistently. Putting strategies, objectives and tactics in place is the first step toward being able to document systems, initiate scripting and improve staff training. Without the basic steps, systems, scripting and training the practice for performance would be hit or miss, at best. More importantly, applying business principles ensures that limited practice resources are dedicated to the achievement of the strategy. By following this simple, three-step process, a dental practice can significantly enhance both financial success and dentist and staff satisfaction.

Improved Methodology for Developing Cost Uncertainty Models for Naval Vessels

DTIC Science & Technology

2008-09-01

Growth: Last 700 Years (From: Deegan , 2007b) ................13 Figure 3. Business Rules to Consider: Choosing an acceptable cost risk point...requires an understanding of consequence (From: Deegan , 2007b)...............16 Figure 4. Basic Steps in Estimating Probable Systems Cost (From: Book...her guidance and assistance in the development of this thesis. Additionally, I thank Mr. Chris Deegan , the former Director of Cost Engineering and

Physiological Responses and Hedonics During Prolonged Physically Interactive Videogame Play.

PubMed

Santo, Antonio S; Barkley, Jacob E; Hafen, Paul S; Navalta, James

2016-04-01

This study was designed to assess physiologic responses and hedonics (i.e., liking) during prolonged physically interactive videogame play. Participants (n = 24) completed three 30-minute videogame conditions on separate days in a random order. During two of the conditions participants played physically interactive videogames (Nintendo of America, Inc. [Redmond, WA] "Wii™ Fit" "Basic Run" and "Basic Step"). During the third condition participants played a traditional/sedentary game ("Tanks!"), which required minimal physical movement for gameplay. Oxygen consumption (VO2) was assessed using indirect calorimetry throughout each condition and averaged every 5 minutes. Liking was assessed via visual analog scale at the 15- and 30-minute time points during each condition. Mean VO2 was significantly (P < 0.001) greater during "Basic Run" (16.14 ± 5.8 mL/kg/minute, 4.6 ± 1.7 metabolic equivalents [METs]) than either "Basic Step" (11.4 ± 1.7 mL/kg/minute, 3.3 ± 0.5 METs) or the traditional/sedentary videogame (5.39 ± 1.0 mL/kg/minute, 1.5 ± 0.1 METs). "Basic Step" was also greater (P < 0.001) than the traditional/sedentary game. VO2 did not significantly (P = 0.25) fluctuate across the 30-minute session for any game. In other words, participants maintained a consistent physiologic intensity throughout each 30-minute condition. There were no differences (P ≥ 0.20) across gaming conditions or time for liking. Participants achieved and maintained moderate-intensity physical activity (≥3.0 METs) during both 30-minute physically interactive videogame conditions. Furthermore, because liking was similar across all gaming conditions, participants may be willing to substitute the physically interactive videogames in place of the traditional/sedentary game.

Characterizing the Fundamental Intellectual Steps Required in the Solution of Conceptual Problems

NASA Astrophysics Data System (ADS)

Stewart, John

2010-02-01

At some level, the performance of a science class must depend on what is taught, the information content of the materials and assignments of the course. The introductory calculus-based electricity and magnetism class at the University of Arkansas is examined using a catalog of the basic reasoning steps involved in the solution of problems assigned in the class. This catalog was developed by sampling popular physics textbooks for conceptual problems. The solution to each conceptual problem was decomposed into its fundamental reasoning steps. These fundamental steps are, then, used to quantify the distribution of conceptual content within the course. Using this characterization technique, an exceptionally detailed picture of the information flow and structure of the class can be produced. The intellectual structure of published conceptual inventories is compared with the information presented in the class and the dependence of conceptual performance on the details of coverage extracted. )

Inclusion of service robots in the daily lives of frail older users: A step-by-step definition procedure on users' requirements.

PubMed

García-Soler, Álvaro; Facal, David; Díaz-Orueta, Unai; Pigini, Lucia; Blasi, Lorenzo; Qiu, Renxi

2018-01-01

The implications for the inclusion of robots in the daily lives of frail older adults, especially in relation to these population needs, have not been extensively studied. The "Multi-Role Shadow Robotic System for Independent Living" (SRS) project has developed a remotely-controlled, semi-autonomous robotic system to be used in domestic environments. The objective of this paper is to document the iterative procedure used to identify, select and prioritize user requirements. Seventy-four requirements were identified by means of focus groups, individual interviews and scenario-based interviews. The list of user requirements, ordered according to impact, number and transnational criteria, revealed a high number of requirements related to basic and instrumental activities of daily living, cognitive and social support and monitorization, and also involving privacy, safety and adaptation issues. Analysing and understanding older users' perceptions and needs when interacting with technological devices adds value to assistive technology and ensures that the systems address currently unmet needs. Copyright © 2017 Elsevier B.V. All rights reserved.

Sequence-dependent base pair stepping dynamics in XPD helicase unwinding

PubMed Central

Qi, Zhi; Pugh, Robert A; Spies, Maria; Chemla, Yann R

2013-01-01

Helicases couple the chemical energy of ATP hydrolysis to directional translocation along nucleic acids and transient duplex separation. Understanding helicase mechanism requires that the basic physicochemical process of base pair separation be understood. This necessitates monitoring helicase activity directly, at high spatio-temporal resolution. Using optical tweezers with single base pair (bp) resolution, we analyzed DNA unwinding by XPD helicase, a Superfamily 2 (SF2) DNA helicase involved in DNA repair and transcription initiation. We show that monomeric XPD unwinds duplex DNA in 1-bp steps, yet exhibits frequent backsteps and undergoes conformational transitions manifested in 5-bp backward and forward steps. Quantifying the sequence dependence of XPD stepping dynamics with near base pair resolution, we provide the strongest and most direct evidence thus far that forward, single-base pair stepping of a helicase utilizes the spontaneous opening of the duplex. The proposed unwinding mechanism may be a universal feature of DNA helicases that move along DNA phosphodiester backbones. DOI: http://dx.doi.org/10.7554/eLife.00334.001 PMID:23741615

Plant genotyping using fluorescently tagged inter-simple sequence repeats (ISSRs): basic principles and methodology.

PubMed

Prince, Linda M

2015-01-01

Inter-simple sequence repeat PCR (ISSR-PCR) is a fast, inexpensive genotyping technique based on length variation in the regions between microsatellites. The method requires no species-specific prior knowledge of microsatellite location or composition. Very small amounts of DNA are required, making this method ideal for organisms of conservation concern, or where the quantity of DNA is extremely limited due to organism size. ISSR-PCR can be highly reproducible but requires careful attention to detail. Optimization of DNA extraction, fragment amplification, and normalization of fragment peak heights during fluorescent detection are critical steps to minimizing the downstream time spent verifying and scoring the data.

Back up healthcare marketing with infection-control basics.

PubMed

Tison-Rossman, J

1993-02-01

In the wake of OSHA's bloodborne pathogens regulation requiring employer-provided apparel for healthcare employees, numerous companies are rushing to capture the market, while others are stepping back for fear that the market is too difficult to serve. Both groups need to reassess their positions. These guidelines adapted from TRSA publications should help get you and your employees up to speed on what it takes to serve the healthcare market.

Standardized Six-Step Approach to the Performance of the Focused Basic Obstetric Ultrasound Examination.

PubMed

Abuhamad, Alfred; Zhao, Yili; Abuhamad, Sharon; Sinkovskaya, Elena; Rao, Rashmi; Kanaan, Camille; Platt, Lawrence

2016-01-01

This study aims to validate the feasibility and accuracy of a new standardized six-step approach to the performance of the focused basic obstetric ultrasound examination, and compare the new approach to the regular approach performed in the scheduled obstetric ultrasound examination. A new standardized six-step approach to the performance of the focused basic obstetric ultrasound examination, to evaluate fetal presentation, fetal cardiac activity, presence of multiple pregnancy, placental localization, amniotic fluid volume evaluation, and biometric measurements, was prospectively performed on 100 pregnant women between 18(+0) and 27(+6) weeks of gestation and another 100 pregnant women between 28(+0) and 36(+6) weeks of gestation. The agreement of findings for each of the six steps of the standardized six-step approach was evaluated against the regular approach. In all ultrasound examinations performed, substantial to perfect agreement (Kappa value between 0.64 and 1.00) was observed between the new standardized six-step approach and the regular approach. The new standardized six-step approach to the focused basic obstetric ultrasound examination can be performed successfully and accurately between 18(+0) and 36(+6) weeks of gestation. This standardized approach can be of significant benefit to limited resource settings and in point of care obstetric ultrasound applications. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Student Failures on First-Year Medical Basic Science Courses and the USMLE Step 1: A Retrospective Study over a 20-Year Period

ERIC Educational Resources Information Center

Burns, E. Robert; Garrett, Judy

2015-01-01

Correlates of achievement in the basic science years in medical school and on the Step 1 of the United States Medical Licensing Examination® (USMLE®), (Step 1) in relation to preadmission variables have been the subject of considerable study. Preadmissions variables such as the undergraduate grade point average (uGPA) and Medical College Admission…

Current practices in teaching introductory epidemiology: how we got here, where to go.

PubMed

Keyes, Katherine M; Galea, Sandro

2014-10-01

The number of students and disciplines requiring basic instruction in epidemiologic methods is growing. As a field, we now have a lexicon of epidemiologic terminology and particular methods that have developed and become canonical through the historical development of the field. Yet, many of our basic concepts remain elusive to some students, particularly those not pursuing a career in epidemiology. Further, disagreement and redundancy across basic terms limit their utility in teaching epidemiology. Many approaches to teaching epidemiology generally start with labeling key concepts and then move on to explain them. We submit that an approach grounded not in labels but in foundational concepts may offer a useful adjunct to introductory epidemiology education. We propose 7 foundational steps in conducting an epidemiologic study and provide examples of how these steps can be operationalized, using simple graphics that articulate how populations are defined, samples are selected, and individuals are followed to count cases. A reorganization of introductory epidemiology around core first principles may be an effective way forward for educating the next generation of public health scientists. © The Author 2014. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Biclustering of gene expression data using reactive greedy randomized adaptive search procedure.

PubMed

Dharan, Smitha; Nair, Achuthsankar S

2009-01-30

Biclustering algorithms belong to a distinct class of clustering algorithms that perform simultaneous clustering of both rows and columns of the gene expression matrix and can be a very useful analysis tool when some genes have multiple functions and experimental conditions are diverse. Cheng and Church have introduced a measure called mean squared residue score to evaluate the quality of a bicluster and has become one of the most popular measures to search for biclusters. In this paper, we review basic concepts of the metaheuristics Greedy Randomized Adaptive Search Procedure (GRASP)-construction and local search phases and propose a new method which is a variant of GRASP called Reactive Greedy Randomized Adaptive Search Procedure (Reactive GRASP) to detect significant biclusters from large microarray datasets. The method has two major steps. First, high quality bicluster seeds are generated by means of k-means clustering. In the second step, these seeds are grown using the Reactive GRASP, in which the basic parameter that defines the restrictiveness of the candidate list is self-adjusted, depending on the quality of the solutions found previously. We performed statistical and biological validations of the biclusters obtained and evaluated the method against the results of basic GRASP and as well as with the classic work of Cheng and Church. The experimental results indicate that the Reactive GRASP approach outperforms the basic GRASP algorithm and Cheng and Church approach. The Reactive GRASP approach for the detection of significant biclusters is robust and does not require calibration efforts.

The ABC's required for establishing a practical computerized plant engineering management data base system

NASA Technical Reports Server (NTRS)

Maiocco, F. R.; Hume, J. P.

1976-01-01

A system's approach is outlined in the paper to assist facility and Plant Engineers improve their organization's data management system. The six basic steps identified may appear somewhat simple; however, adequate planning, proper resources, and the involvement of management will determine the success of a computerized facility management data base. Helpful suggestions are noted throughout the paper to insure the development of a practical computerized data management system.

[The right to share in the nation's wealth: from the Family Allowance Program to Basic Citizenship Income].

PubMed

Suplicy, Eduardo Matarazzo

2007-01-01

This paper presents the positive outcomes of Brazil's Family Allowance Program, in terms of combating hunger and eradicating poverty, stressing that this is the first step towards introducing a Basic Income for Citizenship (RBC - Renda Básica de Cidadania) in Brazil, as established in 2004 through Law N degrees 10,835. This Basic Income for Citizenship will be phased in by stages at the discretion of the Executive Branch, starting with the neediest segments of the population. Everyone will be endowed with the unconditional right to receive an income that will be sufficient - as far as possible - to cover vital requirements. This is not a matter of charity or welfare, but rather an across-the-board right to share in the wealth of the nation. The rationality of this tool for ensuring real freedom and dignity for all is also examined here.

Transit scheduling: Basic and advanced manuals. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pine, R.; Niemeyer, J.; Chisholm, R.

1998-12-01

This manual will be of interest to new transit schedulers, experienced schedulers, transit planners, operating staff, and others who need to be conversant with the scheduling process. The materials clearly describe all steps in the bus and light rail scheduling process, under TCRP Project A-11, Transit Scheduling: A Manual with Materials, research was undertaken by Transportation Management and Design of Solana Beach, California, to prepare a transit scheduling manual that incorporates modern training techniques for bus and light rail transit scheduling. The manual consists of two sections: a basic treatment and an advanced section. The basic-level section is in anmore » instructional format designed primarily for novice schedulers and other transit staff. The advance section covers more complex scheduling requirements. Each section may be used sequentially or independently and is designed to integrate with agency apprenticeship and on-the-job training.« less

A DC Transformer

NASA Technical Reports Server (NTRS)

Youngquist, Robert C.; Ihlefeld, Curtis M.; Starr, Stanley O.

2013-01-01

A component level dc transformer is described in which no alternating currents or voltages are present. It operates by combining features of a homopolar motor and a homopolar generator, both de devices, such that the output voltage of a de power supply can be stepped up (or down) with a corresponding step down (or up) in current. The basic theory for this device is developed, performance predictions are made, and the results from a small prototype are presented. Based on demonstrated technology in the literature, this de transformer should be scalable to low megawatt levels, but it is more suited to high current than high voltage applications. Significant development would be required before it could achieve the kilovolt levels needed for de power transmission.

Basic Technology Tools for Administrators: Preparing for the New Millennium.

ERIC Educational Resources Information Center

Aguilera, Raymond; Hendricks, Joen M.

This paper suggests activities for school administrators to learn basic technology tools. Step-by-step instructions are provided for browsing and using the Internet, organizing favorite World Wide Web sites, and organizing Internet bookmarks. Interesting job search, legal, and professional organization Web sites for administrators are listed. A…

Pozzolanic filtration/solidification of radionuclides in nuclear reactor cooling water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Englehardt, J.D.; Peng, C.

1995-12-31

Laboratory studies to investigate the feasibility of one- and two-step processes for precipitation/coprecipitating radionuclides from nuclear reactor cooling water, filtering with pozzolanic filter aid, and solidifying, are reported in this paper. In the one-step process, ferrocyanide salt and excess lime are added ahead of the filter, and the resulting filter cake solidifies by a pozzolanic reaction. The two-step process involves addition of solidifying agents subsequent to filtration. It was found that high surface area diatomaceous synthetic calcium silicate powders, sold commercially as functional fillers and carriers, adsorb nickel isotopes from solution at neutral and slightly basic pH. Addition of themore » silicates to cooling water allowed removal of the tested metal isotopes (nickel, iron, manganese, cobalt, and cesium) simultaneously at neutral to slightly basic pH. Lime to diatomite ratio was the most influential characteristic of composition on final strength tested, with higher lime ratios giving higher strength. Diatomaceous earth filter aids manufactured without sodium fluxes exhibited higher pozzolanic activity. Pozzolanic filter cake solidified with sodium silicate and a ratio of 0.45 parts lime to 1 part diatomite had compressive strength ranging from 470 to 595 psi at a 90% confidence level. Leachability indices of all tested metals in the solidified waste were acceptable. In light of the typical requirement of removing iron and desirability of control over process pH, a two-step process involving addition of Portland cement to the filter cake may be most generally applicable.« less

Crew interface with a telerobotic control station

NASA Technical Reports Server (NTRS)

Mok, Eva

1987-01-01

A method for apportioning crew-telerobot tasks has been derived to facilitate the design of a crew-friendly telerobot control station. To identify the most appropriate state-of-the-art hardware for the control station, task apportionment must first be conducted to identify if an astronaut or a telerobot is best to execute the task and which displays and controls are required for monitoring and performance. Basic steps that comprise the task analysis process are: (1) identify space station tasks; (2) define tasks; (3) define task performance criteria and perform task apportionment; (4) verify task apportionment; (5) generate control station requirements; (6) develop design concepts to meet requirements; and (7) test and verify design concepts.

Molecular salt effects in the gas phase: tuning the kinetic basicity of [HCCLiCl]⁻ and [HCCMgCl₂]⁻ by LiCl and MgCl₂.

PubMed

Khairallah, George N; da Silva, Gabriel; O'Hair, Richard A J

2014-10-06

A combination of gas-phase ion-molecule reaction experiments and theoretical kinetic modeling is used to examine how a salt can influence the kinetic basicity of organometallates reacting with water. [HC≡CLiCl](-) reacts with water more rapidly than [HC≡CMgCl2](-), consistent with the higher reactivity of organolithium versus organomagnesium reagents. Addition of LiCl to [HC≡CLiCl](-) or [HC≡CMgCl2](-) enhances their reactivity towards water by a factor of about 2, while addition of MgCl2 to [HC≡CMgCl2](-) enhances its reactivity by a factor of about 4. Ab initio calculations coupled with master equation/RRKM theory kinetic modeling show that these reactions proceed via a mechanism involving formation of a water adduct followed by rearrangement, proton transfer, and acetylene elimination as either discrete or concerted steps. Both the energy and entropy requirements for these elementary steps need to be considered in order to explain the observed kinetics. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Art of Showing Art. Revised and Updated.

ERIC Educational Resources Information Center

Reeve, James K.

This book focuses attention on the art objects collections and how to display them. Designing the effective placement of objects is an easily learned art. Starting with the basics, the book takes the reader step by step through a systematic method, to solutions for display problems. The first chapter covers basic concepts of display including…

Teaching BASIC. A Step by Step Guide.

ERIC Educational Resources Information Center

Allen, M. F.

This three-chapter guide provides simple explanations about BASIC programming for a teacher to use in a classroom situation, and suggests procedures for a "hands-on" course. Numerous examples are presented of the questions, problems, and level of understanding to expect from first-time, adult users (ages 13 and up). The course materials…

Furthering knowledge of seaweed growth and development to facilitate sustainable aquaculture.

PubMed

Charrier, Bénédicte; Abreu, Maria Helena; Araujo, Rita; Bruhn, Annette; Coates, Juliet C; De Clerck, Olivier; Katsaros, Christos; Robaina, Rafael R; Wichard, Thomas

2017-12-01

Macroalgae (seaweeds) are the subject of increasing interest for their potential as a source of valuable, sustainable biomass in the food, feed, chemical and pharmaceutical industries. Compared with microalgae, the pace of knowledge acquisition in seaweeds is slower despite the availability of whole-genome sequences and model organisms for the major seaweed groups. This is partly a consequence of specific hurdles related to the large size of these organisms and their slow growth. As a result, this basic scientific field is falling behind, despite the societal and economic importance of these organisms. Here, we argue that sustainable management of seaweed aquaculture requires fundamental understanding of the underlying biological mechanisms controlling macroalgal life cycles - from the production of germ cells to the growth and fertility of the adult organisms - using diverse approaches requiring a broad range of technological tools. This Viewpoint highlights several examples of basic research on macroalgal developmental biology that could enable the step-changes which are required to adequately meet the demands of the aquaculture sector. © 2017 The Authors. New Phytologist © 2017 New Phytologist Trust.

Space Construction Experiment Definition Study (SCEDS), part 3. Volume 2: Study results

NASA Technical Reports Server (NTRS)

1983-01-01

The essential controls and dynamics community needs for a large space structures is addressed by the basic Space Construction Experiments (SCE)/MAST configuration and enhanced configurations for follow-on flights. The SCE/MAST can be integrated on a single structures technology experiments platform (STEP). The experiment objectives can be accomplished without the need for EVA and it is anticipated that further design refinements will eliminate the requirement to use the remote manipulator system.

Value 101: the basics of clinical transformation.

PubMed

Hancock, Melinda S

2013-06-01

Health systems should take strong steps to ensure that their current and aspiring finance leaders are fully prepared to engage with clinicians in meeting the requirements of healthcare reform. In 2012, Bon Secours held a clinical transformation finance intensive to teach finance staff how to accelerate clinical transformation within their markets. The education and skills that Bon Secours' finance professionals gained from the intensive have strengthened the health system's ability to respond to the challenges of reform.

OPERATION IVY. Report of Commander, Task Group 132.1. Pacific Proving Grounds. Joint Task Force 132

DTIC Science & Technology

1984-10-31

3.4.1 Device Planning One of the major purposes of Operation Greenhouse was to answer key questions relating to the possibility of developing...thermonuclear explosions. The Greenhouse George and Item Shots were Important steps in the investigation of basic problems in the development of a...January 1952, staff studies were made which were based on Greenhouse experience and on the best available estimates of the requirements pe- culiar to

Dance-the-Music: an educational platform for the modeling, recognition and audiovisual monitoring of dance steps using spatiotemporal motion templates

NASA Astrophysics Data System (ADS)

Maes, Pieter-Jan; Amelynck, Denis; Leman, Marc

2012-12-01

In this article, a computational platform is presented, entitled "Dance-the-Music", that can be used in a dance educational context to explore and learn the basics of dance steps. By introducing a method based on spatiotemporal motion templates, the platform facilitates to train basic step models from sequentially repeated dance figures performed by a dance teacher. Movements are captured with an optical motion capture system. The teachers' models can be visualized from a first-person perspective to instruct students how to perform the specific dance steps in the correct manner. Moreover, recognition algorithms-based on a template matching method-can determine the quality of a student's performance in real time by means of multimodal monitoring techniques. The results of an evaluation study suggest that the Dance-the-Music is effective in helping dance students to master the basics of dance figures.

On the exact solvability of the anisotropic central spin model: An operator approach

NASA Astrophysics Data System (ADS)

Wu, Ning

2018-07-01

Using an operator approach based on a commutator scheme that has been previously applied to Richardson's reduced BCS model and the inhomogeneous Dicke model, we obtain general exact solvability requirements for an anisotropic central spin model with XXZ-type hyperfine coupling between the central spin and the spin bath, without any prior knowledge of integrability of the model. We outline basic steps of the usage of the operators approach, and pedagogically summarize them into two Lemmas and two Constraints. Through a step-by-step construction of the eigen-problem, we show that the condition gj‧2 - gj2 = c naturally arises for the model to be exactly solvable, where c is a constant independent of the bath-spin index j, and {gj } and { gj‧ } are the longitudinal and transverse hyperfine interactions, respectively. The obtained conditions and the resulting Bethe ansatz equations are consistent with that in previous literature.

Method for exponentiating in cryptographic systems

DOEpatents

Brickell, Ernest F.; Gordon, Daniel M.; McCurley, Kevin S.

1994-01-01

An improved cryptographic method utilizing exponentiation is provided which has the advantage of reducing the number of multiplications required to determine the legitimacy of a message or user. The basic method comprises the steps of selecting a key from a preapproved group of integer keys g; exponentiating the key by an integer value e, where e represents a digital signature, to generate a value g.sup.e ; transmitting the value g.sup.e to a remote facility by a communications network; receiving the value g.sup.e at the remote facility; and verifying the digital signature as originating from the legitimate user. The exponentiating step comprises the steps of initializing a plurality of memory locations with a plurality of values g.sup.xi ; computi The United States Government has rights in this invention pursuant to Contract No. DE-AC04-76DP00789 between the Department of Energy and AT&T Company.

A Neuro-Mechanical Model Explaining the Physiological Role of Fast and Slow Muscle Fibres at Stop and Start of Stepping of an Insect Leg

PubMed Central

Toth, Tibor Istvan; Grabowska, Martyna; Schmidt, Joachim; Büschges, Ansgar; Daun-Gruhn, Silvia

2013-01-01

Stop and start of stepping are two basic actions of the musculo-skeletal system of a leg. Although they are basic phenomena, they require the coordinated activities of the leg muscles. However, little is known of the details of how these activities are generated by the interactions between the local neuronal networks controlling the fast and slow muscle fibres at the individual leg joints. In the present work, we aim at uncovering some of those details using a suitable neuro-mechanical model. It is an extension of the model in the accompanying paper and now includes all three antagonistic muscle pairs of the main joints of an insect leg, together with their dedicated neuronal control, as well as common inhibitory motoneurons and the residual stiffness of the slow muscles. This model enabled us to study putative processes of intra-leg coordination during stop and start of stepping. We also made use of the effects of sensory signals encoding the position and velocity of the leg joints. Where experimental observations are available, the corresponding simulation results are in good agreement with them. Our model makes detailed predictions as to the coordination processes of the individual muscle systems both at stop and start of stepping. In particular, it reveals a possible role of the slow muscle fibres at stop in accelerating the convergence of the leg to its steady-state position. These findings lend our model physiological relevance and can therefore be used to elucidate details of the stop and start of stepping in insects, and perhaps in other animals, too. PMID:24278108

Structured learning for robotic surgery utilizing a proficiency score: a pilot study.

PubMed

Hung, Andrew J; Bottyan, Thomas; Clifford, Thomas G; Serang, Sarfaraz; Nakhoda, Zein K; Shah, Swar H; Yokoi, Hana; Aron, Monish; Gill, Inderbir S

2017-01-01

We evaluated feasibility and benefit of implementing structured learning in a robotics program. Furthermore, we assessed validity of a proficiency assessment tool for stepwise graduation. Teaching cases included robotic radical prostatectomy and partial nephrectomy. Procedure steps were categorized: basic, intermediate, and advanced. An assessment tool ["proficiency score" (PS)] was developed to evaluate ability to safely and autonomously complete a step. Graduation required a passing PS (PS ≥ 3) on three consecutive attempts. PS and validated global evaluative assessment of robotic skills (GEARS) were evaluated for completed steps. Linear regression was utilized to determine postgraduate year/PS relationship (construct validity). Spearman's rank correlation coefficient measured correlation between PS and GEARS evaluations (concurrent validity). Intraclass correlation (ICC) evaluated PS agreement between evaluator classes. Twenty-one robotic trainees participated within the pilot program, completing a median of 14 (2-69) cases each. Twenty-three study evaluators scored 14 (1-60) cases. Over 4 months, 229/294 (78 %) cases were designated "teaching" cases. Residents completed 91 % of possible evaluations; faculty completed 78 %. Verbal and quantitative feedback received by trainees increased significantly (p = 0.002, p < 0.001, respectively). Average PS increased with PGY (post-graduate year) for basic and intermediate steps (regression slopes: 0.402 (p < 0.0001), 0.323 (p < 0.0001), respectively) (construct validation). Overall, PS correlated highly with GEARS (ρ = 0.81, p < 0.0001) (concurrent validity). ICC was 0.77 (95 % CI 0.61-0.88) for resident evaluations. Structured learning can be implemented in an academic robotic program with high levels of trainee and evaluator participation, encouraging both quantitative and verbal feedback. A proficiency assessment tool developed for step-specific proficiency has construct and concurrent validity.

Simulation Activity for Initiating Thinking about Year Around School Plans.

ERIC Educational Resources Information Center

Sagness, Richard L.

This document presents a three-step model for providing teachers with basic information on year-round or extended school plans. As a first step, descriptions of basic plans are given. The four used in this paper are Staggered Quarter for All, Full 48-week School Year for All, Voluntary Summer Program, and A Summer Program for Professional…

Biclustering of gene expression data using reactive greedy randomized adaptive search procedure

PubMed Central

Dharan, Smitha; Nair, Achuthsankar S

2009-01-01

Background Biclustering algorithms belong to a distinct class of clustering algorithms that perform simultaneous clustering of both rows and columns of the gene expression matrix and can be a very useful analysis tool when some genes have multiple functions and experimental conditions are diverse. Cheng and Church have introduced a measure called mean squared residue score to evaluate the quality of a bicluster and has become one of the most popular measures to search for biclusters. In this paper, we review basic concepts of the metaheuristics Greedy Randomized Adaptive Search Procedure (GRASP)-construction and local search phases and propose a new method which is a variant of GRASP called Reactive Greedy Randomized Adaptive Search Procedure (Reactive GRASP) to detect significant biclusters from large microarray datasets. The method has two major steps. First, high quality bicluster seeds are generated by means of k-means clustering. In the second step, these seeds are grown using the Reactive GRASP, in which the basic parameter that defines the restrictiveness of the candidate list is self-adjusted, depending on the quality of the solutions found previously. Results We performed statistical and biological validations of the biclusters obtained and evaluated the method against the results of basic GRASP and as well as with the classic work of Cheng and Church. The experimental results indicate that the Reactive GRASP approach outperforms the basic GRASP algorithm and Cheng and Church approach. Conclusion The Reactive GRASP approach for the detection of significant biclusters is robust and does not require calibration efforts. PMID:19208127

The Core Avionics System for the DLR Compact-Satellite Series

NASA Astrophysics Data System (ADS)

Montenegro, S.; Dittrich, L.

2008-08-01

The Standard Satellite Bus's core avionics system is a further step in the development line of the software and hardware architecture which was first used in the bispectral infrared detector mission (BIRD). The next step improves dependability, flexibility and simplicity of the whole core avionics system. Important aspects of this concept were already implemented, simulated and tested in other ESA and industrial projects. Therefore we can say the basic concept is proven. This paper deals with different aspects of core avionics development and proposes an extension to the existing core avionics system of BIRD to meet current and future requirements regarding flexibility, availability, reliability of small satellite and the continuous increasing demand of mass memory and computational power.

Positive isolation disconnect

NASA Technical Reports Server (NTRS)

Friedell, M. V. (Inventor)

1978-01-01

A disconnect composed basically of two halves each consisting of a poppet valve operable to isolate fluid with essentially zero fluid loss is presented. The two halves are coupled together by a quickly releasable coupling which may be either a coupling ring tightened or loosened by a twisting motion, or a clamp operated by a pivoted to prevent disconnecting the two halves until both valves are in closed condition. The positive feature of the device is one requiring a valve closing step before a disconnect step, and takes structural form in an accentric lobe mounted on the valve operating stem. If some obstruction prevents the poppet from moving to its seat, the eccentric lobe cannot be rotated to the closed position, and the interlock prevents a disconnect.

Physical Activity and Physical Fitness in Pediatric Obesity: What are the First Steps for Clinicians? Expert Conclusion from the 2016 ECOG Workshop

PubMed Central

O’MALLEY, GRACE; RING-DIMITRIOU, SUSANNE; NOWICKA, PAULINA; VANIA, ANDREA; FRELUT, MARIE-LAURE; FARPOUR-LAMBERT, NATHALIE; WEGHUBER, DANIEL; THIVEL, DAVID

2017-01-01

One of the main aims of the European Childhood Obesity Group (ECOG) is to assist healthcare workers in delivering evidence-based assessment and treatment of childhood obesity. Every year the ECOG Congress includes working groups whose objective is to highlight concerns faced by clinicians and practitioners who work in the field of pediatric obesity. This year, a working group was devoted to the assessment of physical activity and physical fitness in this population. The present commentary attempts to summarize the main themes identified by practitioners during these workshops in order to provide the basic and essential first steps required to address physical activity and fitness in children with obesity. PMID:28674594

Analysis of protein and lipid dynamics using confocal fluorescence recovery after photobleaching (FRAP)

PubMed Central

Day, Charles A.; Kraft, Lewis J.; Kang, Minchul; Kenworthy, Anne K.

2012-01-01

Fluorescence recovery after photobleaching (FRAP) is a powerful, versatile and widely accessible tool to monitor molecular dynamics in living cells that can be performed using modern confocal microscopes. Although the basic principles of FRAP are simple, quantitative FRAP analysis requires careful experimental design, data collection and analysis. In this review we discuss the theoretical basis for confocal FRAP, followed by step-by-step protocols for FRAP data acquisition using a laser scanning confocal microscope for (1) measuring the diffusion of a membrane protein, (2) measuring the diffusion of a soluble protein, and (3) analysis of intracellular trafficking. Finally, data analysis procedures are discussed and an equation for determining the diffusion coefficient of a molecular species undergoing pure diffusion is presented. PMID:23042527

β-Catenin Is Required for Hair-Cell Differentiation in the Cochlea

PubMed Central

Hu, Lingxiang; Jacques, Bonnie E.; Mulvaney, Joanna F.; Dabdoub, Alain

2014-01-01

The development of hair cells in the auditory system can be separated into steps; first, the establishment of progenitors for the sensory epithelium, and second, the differentiation of hair cells. Although the differentiation of hair cells is known to require the expression of basic helix-loop-helix transcription factor, Atoh1, the control of cell proliferation in the region of the developing cochlea that will ultimately become the sensory epithelium and the cues that initiate Atoh1 expression remain obscure. We assessed the role of Wnt/β-catenin in both steps in gain- and loss-of-function models in mice. The canonical Wnt pathway mediator, β-catenin, controls the expression of Atoh1. Knock-out of β-catenin inhibited hair-cell, as well as pillar-cell, differentiation from sensory progenitors but was not required to maintain a hair-cell fate once specified. Constitutive activation of β-catenin expanded sensory progenitors by inducing additional cell division and resulted in the differentiation of extra hair cells. Our data demonstrate that β-catenin plays a role in cell division and differentiation in the cochlear sensory epithelium. PMID:24806673

What is a wiki, and how can it be used in resident education?

PubMed

Kohli, Marc D; Bradshaw, John K

2011-02-01

Training as a radiology resident is a complex task. Residents frequently encounter multiple hospital systems, each with unique workflow patterns and heterogenous information systems. We identified an opportunity to ease some of the resulting anxiety and frustration by centralizing high-quality resources using a wiki. In this manuscript, we describe our choice of wiki software, give basic information about hardware requirements, detail steps for configuration, outline information included on the wiki, and present the results of a resident acceptance survey.

Performance Limiting Flow Processes in High-State Loading High-Mach Number Compressors

DTIC Science & Technology

2008-03-13

the Doctoral Thesis Committee of the doctoral student. 3 3.0 Technical Background A strong incentive exists to reduce airfoil count in aircraft engine ...Advanced Turbine Engine ). A basic constraint on blade reduction is seen from the Euler turbine equation, which shows that, although a design can be carried...on the vane to rotor blade ratio of 8:11). Within the MSU Turbo code, specifying a small number of time steps requires more iteration at each time

Basic Skills Resource Center: A Descriptive Study of Learning Strategy Applications by English-as a-Second-Langage Students and Teachers in the Army

DTIC Science & Technology

1985-05-01

collection activity is presented in Table 1. Initial classroom observation of ESL classes was undertaken to familiarize researchers with the DLI curriculum...initiative. However, no student was observed asking another for information or clarification. Only in one classroom observation were the soldiers...one classroom observation where the soldiers were required to perform the steps involved in caring for and maintaining a gas mask was enlightening, for

Student failures on first-year medical basic science courses and the USMLE step 1: a retrospective study over a 20-year period.

PubMed

Burns, E Robert; Garrett, Judy

2015-01-01

Correlates of achievement in the basic science years in medical school and on the Step 1 of the United States Medical Licensing Examination® (USMLE®), (Step 1) in relation to preadmission variables have been the subject of considerable study. Preadmissions variables such as the undergraduate grade point average (uGPA) and Medical College Admission Test® (MCAT®) scores, solely or in combination, have previously been found to be predictors of achievement in the basic science years and/or on the Step 1. The purposes of this retrospective study were to: (1) determine if our statistical analysis confirmed previously published relationships between preadmission variables (MCAT, uGPA, and applicant pool size), and (2) study correlates of the number of failures in five M1 courses with those preadmission variables and failures on Step 1. Statistical analysis confirmed previously published relationships between all preadmission variables. Only one course, Microscopic Anatomy, demonstrated significant correlations with all variables studied including the Step 1 failures. Physiology correlated with three of the four variables studied, but not with the Step 1 failures. Analyses such as these provide a tool by which administrators will be able to identify what courses are or are not responding in appropriate ways to changes in the preadmissions variables that signal student performance on the Step 1. © 2014 American Association of Anatomists.

Possibly All of that and Then Some: Scalar Implicatures Are Understood in Two Steps

ERIC Educational Resources Information Center

Tomlinson, John M., Jr.; Bailey, Todd M.; Bott, Lewis

2013-01-01

Scalar implicatures often incur a processing cost in sentence comprehension tasks. We used a novel mouse-tracking technique in a sentence verification paradigm to test different accounts of this effect. We compared a two-step account, in which people access a basic meaning and then enrich the basic meaning to form the scalar implicature, against a…

Planning for the next influenza pandemic: using the science and art of logistics.

PubMed

Cupp, O Shawn; Predmore, Brad G

2011-01-01

The complexities and challenges for healthcare providers and their efforts to provide fundamental basic items to meet the logistical demands of an influenza pandemic are discussed in this article. The supply chain, planning, and alternatives for inevitable shortages are some of the considerations associated with this emergency mass critical care situation. The planning process and support for such events are discussed in detail with several recommendations obtained from the literature and the experience from recent mass casualty incidents (MCIs). The first step in this planning process is the development of specific triage requirements during an influenza pandemic. The second step is identification of logistical resources required during such a pandemic, which are then analyzed within the proposed logistics science and art model for planning purposes. Resources highlighted within the model include allocation and use of work force, bed space, intensive care unit assets, ventilators, personal protective equipment, and oxygen. The third step is using the model to discuss in detail possible workarounds, suitable substitutes, and resource allocation. An examination is also made of the ethics surrounding palliative care within the construction of an MCI and the factors that will inevitably determine rationing and prioritizing of these critical assets to palliative care patients.

Gravitational wave signals of electroweak phase transition triggered by dark matter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chao, Wei; Guo, Huai-Ke; Shu, Jing, E-mail: chaowei@bnu.edu.cn, E-mail: ghk@itp.ac.cn, E-mail: jshu@itp.ac.cn

We study in this work a scenario that the universe undergoes a two step phase transition with the first step happened to the dark matter sector and the second step being the transition between the dark matter and the electroweak vacuums, where the barrier between the two vacuums, that is necessary for a strongly first order electroweak phase transition (EWPT) as required by the electroweak baryogenesis mechanism, arises at the tree-level. We illustrate this idea by working with the standard model (SM) augmented by a scalar singlet dark matter and an extra scalar singlet which mixes with the SM Higgsmore » boson. We study the conditions for such pattern of phase transition to occur and especially for the strongly first order EWPT to take place, as well as its compatibility with the basic requirements of a successful dark matter, such as observed relic density and constraints of direct detections. We further explore the discovery possibility of this pattern EWPT by searching for the gravitational waves generated during this process in spaced based interferometer, by showing a representative benchmark point of the parameter space that the generated gravitational waves fall within the sensitivity of eLISA, DECIGO and BBO.« less

Gravitational wave signals of electroweak phase transition triggered by dark matter

NASA Astrophysics Data System (ADS)

Chao, Wei; Guo, Huai-Ke; Shu, Jing

2017-09-01

We study in this work a scenario that the universe undergoes a two step phase transition with the first step happened to the dark matter sector and the second step being the transition between the dark matter and the electroweak vacuums, where the barrier between the two vacuums, that is necessary for a strongly first order electroweak phase transition (EWPT) as required by the electroweak baryogenesis mechanism, arises at the tree-level. We illustrate this idea by working with the standard model (SM) augmented by a scalar singlet dark matter and an extra scalar singlet which mixes with the SM Higgs boson. We study the conditions for such pattern of phase transition to occur and especially for the strongly first order EWPT to take place, as well as its compatibility with the basic requirements of a successful dark matter, such as observed relic density and constraints of direct detections. We further explore the discovery possibility of this pattern EWPT by searching for the gravitational waves generated during this process in spaced based interferometer, by showing a representative benchmark point of the parameter space that the generated gravitational waves fall within the sensitivity of eLISA, DECIGO and BBO.

High-throughput automated microfluidic sample preparation for accurate microbial genomics

PubMed Central

Kim, Soohong; De Jonghe, Joachim; Kulesa, Anthony B.; Feldman, David; Vatanen, Tommi; Bhattacharyya, Roby P.; Berdy, Brittany; Gomez, James; Nolan, Jill; Epstein, Slava; Blainey, Paul C.

2017-01-01

Low-cost shotgun DNA sequencing is transforming the microbial sciences. Sequencing instruments are so effective that sample preparation is now the key limiting factor. Here, we introduce a microfluidic sample preparation platform that integrates the key steps in cells to sequence library sample preparation for up to 96 samples and reduces DNA input requirements 100-fold while maintaining or improving data quality. The general-purpose microarchitecture we demonstrate supports workflows with arbitrary numbers of reaction and clean-up or capture steps. By reducing the sample quantity requirements, we enabled low-input (∼10,000 cells) whole-genome shotgun (WGS) sequencing of Mycobacterium tuberculosis and soil micro-colonies with superior results. We also leveraged the enhanced throughput to sequence ∼400 clinical Pseudomonas aeruginosa libraries and demonstrate excellent single-nucleotide polymorphism detection performance that explained phenotypically observed antibiotic resistance. Fully-integrated lab-on-chip sample preparation overcomes technical barriers to enable broader deployment of genomics across many basic research and translational applications. PMID:28128213

One Step Forward and Two Steps Back: A Study of the Image of Women in the 100 Basic Works of Literature in Turkey

ERIC Educational Resources Information Center

Cer, Erkan

2015-01-01

Children's books of literary quality may affect gender perception, self-perception, and the social roles of children through the illustrations, main characters, and situations that they reflect. The Turkish Ministry of Education suggested a list consisting of stories, novels, poetry, and puns under the title "100 Basic Works of…

Observing the sick child: part 2b. Respiratory palpation.

PubMed

Aylott, Marion

2007-02-01

Assessment is a major nursing role, and expanding assessment techniques, traditionally seen as the remit of the medical profession, can assist nursing assessment and the provision of appropriate care. This is the third article in a series of five articles. Parts 1 and 2a provided a practical critical review of the validity and reliability of basic respiratory assessment focusing on measurement of respiratory rate, rhythm and depth. This article provides a practical step-by-step introduction to the theory and practice of advanced respiratory assessment using palpation. Next month we will build on these skills and provide a practical step-by-step introduction to using auscultation in order to augment basic respiratory assessment skills.

"Small Steps, Big Rewards": You Can Prevent Type 2 Diabetes

MedlinePlus

... Home Current Issue Past Issues Special Section "Small Steps, Big Rewards": You Can Prevent Type 2 Diabetes ... onset. Those are the basic facts of "Small Steps. Big Rewards: Prevent type 2 Diabetes," created by ...

Lunar base - A stepping stone to Mars

NASA Technical Reports Server (NTRS)

Duke, M. B.; Mendell, W. W.; Roberts, B. B.

1985-01-01

Basic elements of technology and programmatic development are identified that appear relevant to the Case for Mars, starting from a base on the moon. The moon is a logical stepping stone toward human exploration of Mars because a lunar base can provide the first test of human ability to use the resources of another planetary body to provide basic materials for life support. A lunar base can provide the first long-term test of human capability to work and live in a reduced (but not zero) gravity field. A lunar base requires creation of the elements of a space transportation system that will be necessary to deliver large payloads to Mars and the space operations capability and experience necessary to carry out a Mars habitation program efficiently and with high reliability. A lunar base is feasible for the first decade of the 21st Century. Scenarios have been studied that provide advanced capability by 2015 within budget levels that are less than historical U.S. space expenditures (Apollo). Early return on the investment in terms of knowledge, practical experience and lunar products are important in gaining momentum for an expanded human exploration of the solar system and the eventual colonization of Mars.

Towards the run and walk activity classification through step detection--an android application.

PubMed

Oner, Melis; Pulcifer-Stump, Jeffry A; Seeling, Patrick; Kaya, Tolga

2012-01-01

Falling is one of the most common accidents with potentially irreversible consequences, especially considering special groups, such as the elderly or disabled. One approach to solve this issue would be an early detection of the falling event. Towards reaching the goal of early fall detection, we have worked on distinguishing and monitoring some basic human activities such as walking and running. Since we plan to implement the system mostly for seniors and the disabled, simplicity of the usage becomes very important. We have successfully implemented an algorithm that would not require the acceleration sensor to be fixed in a specific position (the smart phone itself in our application), whereas most of the previous research dictates the sensor to be fixed in a certain direction. This algorithm reviews data from the accelerometer to determine if a user has taken a step or not and keeps track of the total amount of steps. After testing, the algorithm was more accurate than a commercial pedometer in terms of comparing outputs to the actual number of steps taken by the user.

Determining the Number of Clusters in a Data Set Without Graphical Interpretation

NASA Technical Reports Server (NTRS)

Aguirre, Nathan S.; Davies, Misty D.

2011-01-01

Cluster analysis is a data mining technique that is meant ot simplify the process of classifying data points. The basic clustering process requires an input of data points and the number of clusters wanted. The clustering algorithm will then pick starting C points for the clusters, which can be either random spatial points or random data points. It then assigns each data point to the nearest C point where "nearest usually means Euclidean distance, but some algorithms use another criterion. The next step is determining whether the clustering arrangement this found is within a certain tolerance. If it falls within this tolerance, the process ends. Otherwise the C points are adjusted based on how many data points are in each cluster, and the steps repeat until the algorithm converges,

A two-step mechanism for epigenetic specification of centromere identity and function

PubMed Central

Fachinetti, Daniele; Folco, H. Diego; Nechemia-Arbely, Yael; Valente, Luis P.; Nguyen, Kristen; Wong, Alex J.; Zhu, Quan; Holland, Andrew J.; Desai, Arshad; Jansen, Lars E.T.; Cleveland, Don W.

2015-01-01

Summary The basic determinant of chromosome inheritance, the centromere, is specified in many eukaryotes by an epigenetic mark. Using gene targeting in human cells and fission yeast, chromatin containing the centromere-specific histone H3 variant CENP-A is demonstrated to be the epigenetic mark that acts through a two-step mechanism to identify, maintain and propagate centromere function indefinitely. Initially, centromere position is replicated and maintained by chromatin assembled with the centromere-targeting domain (CATD) of CENP-A substituted into H3. Subsequently, nucleation of kinetochore assembly onto CATD-containing chromatin is shown to require either CENP-A’s amino- or carboxy-terminal tails for recruitment of inner kinetochore proteins, including stabilizing CENP-B binding to human centromeres or direct recruitment of CENP-C, respectively. PMID:23873148

A two-step mechanism for epigenetic specification of centromere identity and function.

PubMed

Fachinetti, Daniele; Folco, H Diego; Nechemia-Arbely, Yael; Valente, Luis P; Nguyen, Kristen; Wong, Alex J; Zhu, Quan; Holland, Andrew J; Desai, Arshad; Jansen, Lars E T; Cleveland, Don W

2013-09-01

The basic determinant of chromosome inheritance, the centromere, is specified in many eukaryotes by an epigenetic mark. Using gene targeting in human cells and fission yeast, chromatin containing the centromere-specific histone H3 variant CENP-A is demonstrated to be the epigenetic mark that acts through a two-step mechanism to identify, maintain and propagate centromere function indefinitely. Initially, centromere position is replicated and maintained by chromatin assembled with the centromere-targeting domain (CATD) of CENP-A substituted into H3. Subsequently, nucleation of kinetochore assembly onto CATD-containing chromatin is shown to require either the amino- or carboxy-terminal tail of CENP-A for recruitment of inner kinetochore proteins, including stabilizing CENP-B binding to human centromeres or direct recruitment of CENP-C, respectively.

A data reduction technique and associated computer program for obtaining vehicle attitudes with a single onboard camera

NASA Technical Reports Server (NTRS)

Bendura, R. J.; Renfroe, P. G.

1974-01-01

A detailed discussion of the application of a previously method to determine vehicle flight attitude using a single camera onboard the vehicle is presented with emphasis on the digital computer program format and data reduction techniques. Application requirements include film and earth-related coordinates of at least two landmarks (or features), location of the flight vehicle with respect to the earth, and camera characteristics. Included in this report are a detailed discussion of the program input and output format, a computer program listing, a discussion of modifications made to the initial method, a step-by-step basic data reduction procedure, and several example applications. The computer program is written in FORTRAN 4 language for the Control Data 6000 series digital computer.

Past, present and future of spike sorting techniques

PubMed Central

Rey, Hernan Gonzalo; Pedreira, Carlos; Quian Quiroga, Rodrigo

2015-01-01

Spike sorting is a crucial step to extract information from extracellular recordings. With new recording opportunities provided by the development of new electrodes that allow monitoring hundreds of neurons simultaneously, the scenario for the new generation of algorithms is both exciting and challenging. However, this will require a new approach to the problem and the development of a common reference framework to quickly assess the performance of new algorithms. In this work, we review the basic concepts of spike sorting, including the requirements for different applications, together with the problems faced by presently available algorithms. We conclude by proposing a roadmap stressing the crucial points to be addressed to support the neuroscientific research of the near future. PMID:25931392

Key steps for integrating a basic science throughout a medical school curriculum using an e-learning approach.

PubMed

Dubois, Eline Agnès; Franson, Kari Lanette

2009-09-01

Basic sciences can be integrated into the medical school curriculum via e-learning. The process of integrating a basic science in this manner resembles a curricular change. The change usually begins with an idea for using e-learning to teach a basic science and establishing the need for the innovation. In the planning phase, learning outcomes are formulated and a prototype of the program is developed based on the desired requirements. A realistic concept is formed after considering the limitations of the current institute. Next, a project team is assembled to develop the program and plan its integration. Incorporation of the e-learning program is facilitated by a well-developed and communicated integration plan. Various course coordinators are contacted to determine content of the e-learning program as well as establish assessment. Linking the e-learning program to existing course activities and thereby applying the basic science into the clinical context enhances the degree of integration. The success of the integration is demonstrated by a positive assessment of the program including favourable cost-benefit analysis and improved student performance. Lastly, when the program becomes institutionalised, continuously updating content and technology (when appropriate), and evaluating the integration contribute to the prolonged survival of the e-learning program.

Basic Cake Decorating Workbook.

ERIC Educational Resources Information Center

Bogdany, Mel

Included in this student workbook for basic cake decorating are the following: (1) Drawings of steps in a basic way to ice a layer cake, how to make a paper cone, various sizes of flower nails, various sizes and types of tin pastry tubes, and special rose tubes; (2) recipes for basic decorating icings (buttercream, rose paste, and royal icing);…

HYPERDATA - BASIC HYPERSONIC DATA AND EQUATIONS

NASA Technical Reports Server (NTRS)

Mackall, D.

1994-01-01

In an effort to place payloads into orbit at the lowest possible costs, the use of air-breathing space-planes, which reduces the need to carry the propulsion system oxidizer, has been examined. As this approach would require the space-plane to fly at hypersonic speeds for periods of time much greater than that required by rockets, many factors must be considered when analyzing its benefits. The Basic Hypersonic Data and Equations spreadsheet provides data gained from three analyses of a space-plane's performance. The equations used to perform the analyses are derived from Newton's second law of physics (i.e. force equals mass times acceleration); the derivation is included. The first analysis is a parametric study of some basic factors affecting the ability of a space-plane to reach orbit. This step calculates the fraction of fuel mass to the total mass of the space-plane at takeoff. The user is able to vary the altitude, the heating value of the fuel, the orbital gravity, and orbital velocity. The second analysis calculates the thickness of a spherical fuel tank, while assuming all of the mass of the vehicle went into the tank's shell. This provides a first order analysis of how much material results from a design where the fuel represents a large portion of the total vehicle mass. In this step, the user is allowed to vary the values for gross weight, material density, and fuel density. The third analysis produces a ratio of gallons of fuel per total mass for various aircraft. It shows that the volume of fuel required by the space-plane relative to the total mass is much larger for a liquid hydrogen space-plane than any other vehicle made. This program is a spreadsheet for use on Macintosh series computers running Microsoft Excel 3.0. The standard distribution medium for this package is a 3.5 inch 800K Macintosh format diskette. Documentation is included in the price of the program. Macintosh is a registered trademark of Apple Computer, Inc. Microsoft is a registered trademark of Microsoft Corporation.

Detection and Characterization of Viral Species/Subspecies Using Isothermal Recombinase Polymerase Amplification (RPA) Assays.

PubMed

Glais, Laurent; Jacquot, Emmanuel

2015-01-01

Numerous molecular-based detection protocols include an amplification step of the targeted nucleic acids. This step is important to reach the expected sensitive detection of pathogens in diagnostic procedures. Amplifications of nucleic acid sequences are generally performed, in the presence of appropriate primers, using thermocyclers. However, the time requested to amplify molecular targets and the cost of the thermocycler machines could impair the use of these methods in routine diagnostics. Recombinase polymerase amplification (RPA) technique allows rapid (short-term incubation of sample and primers in an enzymatic mixture) and simple (isothermal) amplification of molecular targets. RPA protocol requires only basic molecular steps such as extraction procedures and agarose gel electrophoresis. Thus, RPA can be considered as an interesting alternative to standard molecular-based diagnostic tools. In this paper, the complete procedures to set up an RPA assay, applied to detection of RNA (Potato virus Y, Potyvirus) and DNA (Wheat dwarf virus, Mastrevirus) viruses, are described. The proposed procedure allows developing species- or subspecies-specific detection assay.

Converting baker's waste into alcohol. Revised final progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Halsey, R.; Wilson, P.B.

All types of baker's waste (including waste from candy manufacturers) can be converted into alcohol to be used as a fuel. All types of waste at any stage in process can be converted, such as: basic ingredients (including floor sweepings); dry mixes (including floor sweepings); dough at any stage; partially or fully cooked products; and day old returned products. The basic steps are the same, only the initial preparation will vary slightly. The variation will be: amount of water to be added and amount and type of nutrients (if any) to be added. The basic steps are: slurrying, liquefying tomore » put starch into liquid state, saccharifying to convert starch into fermentable sugars, fermentation to convert sugars into alcohol, and distillation to separate the alcohol from the mash. Each step is discussed in detail along with problems that may arise. Directions are given and materials (enzymes, yeast, etc.) and equipment are descibed briefly.« less

Material characterization for morphing purposes in order to match flight requirements

NASA Astrophysics Data System (ADS)

Geier, Sebastian; Kintscher, Markus; Heintze, Olaf; Wierach, Peter; Monner, Hans-Peter; Wiedemann, Martin

2012-04-01

Natural laminar flow is one of the challenging aims of the current aerospace research. Main reasons for the aerodynamic transition from laminar into turbulent flow focusing on the airfoil-structure is the aerodynamic shape and the surface roughness. The Institute of Composite Structures and Adaptive Systems at the German Aerospace Center in Braunschweig works on the optimization of the aerodynamic-loaded structure of future aircrafts in order to increase their efficiency. Providing wing structures suited for natural laminar flow is a step towards this goal. Regarding natural laminar flow, the structural design of the leading edge of a wing is of special interest. An approach for a gap-less leading edge was developed to provide a gap- and step-less high quality surface suited for natural laminar flow and to reduce slat noise. In a national project the first generation of the 3D full scale demonstrator was successfully tested in 2010. The prototype consists of several new technologies, opening up the issue of matching the long and challenging list of airworthiness requirements simultaneously. Therefore the developed composite structure was intensively tested for further modifications according to meet requirements for abrasion, impact and deicing basically. The former presented structure consists completely of glass-fiber-prepreg (GFRP-prepreg). New functions required the addition of a new material-mix, which has to fit into the manufacturing-chain of the composite structure. In addition the hybrid composites have to withstand high loadings, high bending-induced strains (1%) and environmentally influenced aging. Moreover hot-wet cycling tests are carried out for the basic GFRP-structure in order to simulate the long term behavior of the material under extrem conditions. The presented paper shows results of four-points-bending-tests of the most critical section of the morphing leading edge device. Different composite-hybrids are built up and processed. An experimental based trend towards an optimized material design will be shown.

It's DE-licious: A Recipe for Differential Expression Analyses of RNA-seq Experiments Using Quasi-Likelihood Methods in edgeR.

PubMed

Lun, Aaron T L; Chen, Yunshun; Smyth, Gordon K

2016-01-01

RNA sequencing (RNA-seq) is widely used to profile transcriptional activity in biological systems. Here we present an analysis pipeline for differential expression analysis of RNA-seq experiments using the Rsubread and edgeR software packages. The basic pipeline includes read alignment and counting, filtering and normalization, modelling of biological variability and hypothesis testing. For hypothesis testing, we describe particularly the quasi-likelihood features of edgeR. Some more advanced downstream analysis steps are also covered, including complex comparisons, gene ontology enrichment analyses and gene set testing. The code required to run each step is described, along with an outline of the underlying theory. The chapter includes a case study in which the pipeline is used to study the expression profiles of mammary gland cells in virgin, pregnant and lactating mice.

Investigation of direct solar-to-microwave energy conversion techniques

NASA Technical Reports Server (NTRS)

Chatterton, N. E.; Mookherji, T. K.; Wunsch, P. K.

1978-01-01

Identification of alternative methods of producing microwave energy from solar radiation for purposes of directing power to the Earth from space is investigated. Specifically, methods of conversion of optical radiation into microwave radiation by the most direct means are investigated. Approaches based on demonstrated device functioning and basic phenomenologies are developed. There is no system concept developed, that is competitive with current baseline concepts. The most direct methods of conversion appear to require an initial step of production of coherent laser radiation. Other methods generally require production of electron streams for use in solid-state or cavity-oscillator systems. Further development is suggested to be worthwhile for suggested devices and on concepts utilizing a free-electron stream for the intraspace station power transport mechanism.

Basic autonomy as a fundamental step in the synthesis of life.

PubMed

Ruiz-Mirazo, Kepa; Moreno, Alvaro

2004-01-01

In the search for the primary roots of autonomy (a pivotal concept in Varela's comprehensive understanding of living beings), the theory of autopoiesis provided an explicit criterion to define minimal life in universal terms, and was taken as a guideline in the research program for the artificial synthesis of biological systems. Acknowledging the invaluable contribution of the autopoietic school to present biological thinking, we offer an alternative way of conceiving the most basic forms of autonomy. We give a bottom-up account of the origins of "self-production" (or self-construction, as we propose to call it), pointing out which are the minimal material and energetic requirements for the constitution of basic autonomous systems. This account is, indeed, committed to the project of developing a general theory of biology, but well grounded in the universal laws of physics and chemistry. We consider that the autopoietic theory was formulated in highly abstract terms and, in order to advance in the implementation of minimal autonomous systems (and, at the same time, make major progress in exploring the origins of life), a more specific characterization of minimal autonomous systems is required. Such a characterization will not be drawn from a review of the autopoietic criteria and terminology (à la Fleischaker) but demands a whole reformulation of the question: a proper naturalization of the concept of autonomy. Finally, we also discuss why basic autonomy, according to our account, is necessary but not sufficient for life, in contrast with Varela's idea that autopoiesis was a necessary and sufficient condition for it.

Current Health Problems.

ERIC Educational Resources Information Center

Gay, John; And Others

The basic premise of this text is that, in addition to the presentation of basic cognitive and affective information, health education should go one step further by assisting student in developing decision-making skills. The text begins by offering the student a basic foundation of what is meant by health and how this meaning applies to the world,…

Purification and Refolding of Overexpressed Human Basic Fibroblast Growth Factor in Escherichia coli

PubMed Central

Alibolandi, Mona; Mirzahoseini, Hasan

2011-01-01

This work describes the integration of expanded bed adsorption (EBA) and adsorptive protein refolding operations used to recover purified and biologically active human basic fibroblast growth factor from inclusion bodies expressed in E. coli. Insoluble overexpressed human basic fibroblast growth factor has been purified on CM Hyper Z matrix by expanded bed adsorption after isolation and solubilization in 8 M urea. The adsorption was made in expanded bed without clarification steps such as centrifugation. Column refolding was done by elimination of urea and elution with NaCl. The human basic fibroblast growth factor was obtained as a highly purified soluble monomer form with similar behavior in circular dichroism and fluorescence spectroscopy as native protein. A total of 92.52% of the available human basic fibroblast growth factor was recovered as biologically active and purified protein using the mentioned purification and refolding process. This resulted in the first procedure describing high-throughput purification and refolding of human basic fibroblast growth factor in one step and is likely to have the greatest benefit for proteins that tend to aggregate when refolded by dilution. PMID:21837279

Long-term depression-associated signaling is required for an in vitro model of NMDA receptor-dependent synapse pruning

PubMed Central

Henson, Maile A.; Tucker, Charles J.; Zhao, Meilan; Dudek, Serena M.

2016-01-01

Activity-dependent pruning of synaptic contacts plays a critical role in shaping neuronal circuitry in response to the environment during postnatal brain development. Although there is compelling evidence that shrinkage of dendritic spines coincides with synaptic long-term depression (LTD), and that LTD is accompanied by synapse loss, whether NMDA receptor (NMDAR)-dependent LTD is a required step in the progression toward synapse pruning is still unknown. Using repeated applications of NMDA to induce LTD in dissociated rat neuronal cultures, we found that synapse density, as measured by colocalization of fluorescent markers for pre- and postsynaptic structures, was decreased irrespective of the presynaptic marker used, post-treatment recovery time, and the dendritic location of synapses. Consistent with previous studies, we found that synapse loss could occur without apparent net spine loss or cell death. Furthermore, synapse loss was unlikely to require direct contact with microglia, as the number of these cells was minimal in our culture preparations. Supporting a model by which NMDAR-LTD is required for synapse loss, the effect of NMDA on fluorescence colocalization was prevented by phosphatase and caspase inhibitors. In addition, gene transcription and protein translation also appeared to be required for loss of putative synapses. These data support the idea that NMDAR-dependent LTD is a required step in synapse pruning and contribute to our understanding of the basic mechanisms of this developmental process. PMID:27794462

Measurement of Maximum Isometric Force Generated by Permeabilized Skeletal Muscle Fibers.

PubMed

Roche, Stuart M; Gumucio, Jonathan P; Brooks, Susan V; Mendias, Christopher L; Claflin, Dennis R

2015-06-16

Analysis of the contractile properties of chemically skinned, or permeabilized, skeletal muscle fibers offers a powerful means by which to assess muscle function at the level of the single muscle cell. Single muscle fiber studies are useful in both basic science and clinical studies. For basic studies, single muscle fiber contractility measurements allow investigation of fundamental mechanisms of force production, and analysis of muscle function in the context of genetic manipulations. Clinically, single muscle fiber studies provide useful insight into the impact of injury and disease on muscle function, and may be used to guide the understanding of muscular pathologies. In this video article we outline the steps required to prepare and isolate an individual skeletal muscle fiber segment, attach it to force-measuring apparatus, activate it to produce maximum isometric force, and estimate its cross-sectional area for the purpose of normalizing the force produced.

Numerical investigation of the flow inside the combustion chamber of a plant oil stove

NASA Astrophysics Data System (ADS)

Pritz, B.; Werler, M.; Wirbser, H.; Gabi, M.

2013-10-01

Recently a low cost cooking device for developing and emerging countries was developed at KIT in cooperation with the company Bosch und Siemens Hausgeräte GmbH. After constructing an innovative basic design further development was required. Numerical investigations were conducted in order to investigate the flow inside the combustion chamber of the stove under variation of different geometrical parameters. Beyond the performance improvement a further reason of the investigations was to rate the effects of manufacturing tolerance problems. In this paper the numerical investigation of a plant oil stove by means of RANS simulation will be presented. In order to reduce the computational costs different model reduction steps were necessary. The simulation results of the basic configuration compare very well with experimental measurements and problematic behaviors of the actual stove design could be explained by the investigation.

Business model for sensor-based fall recognition systems.

PubMed

Fachinger, Uwe; Schöpke, Birte

2014-01-01

AAL systems require, in addition to sophisticated and reliable technology, adequate business models for their launch and sustainable establishment. This paper presents the basic features of alternative business models for a sensor-based fall recognition system which was developed within the context of the "Lower Saxony Research Network Design of Environments for Ageing" (GAL). The models were developed parallel to the R&D process with successive adaptation and concretization. An overview of the basic features (i.e. nine partial models) of the business model is given and the mutual exclusive alternatives for each partial model are presented. The partial models are interconnected and the combinations of compatible alternatives lead to consistent alternative business models. However, in the current state, only initial concepts of alternative business models can be deduced. The next step will be to gather additional information to work out more detailed models.

Allelic variants of hereditary prions: The bimodularity principle.

PubMed

Tikhodeyev, Oleg N; Tarasov, Oleg V; Bondarev, Stanislav A

2017-01-02

Modern biology requires modern genetic concepts equally valid for all discovered mechanisms of inheritance, either "canonical" (mediated by DNA sequences) or epigenetic. Applying basic genetic terms such as "gene" and "allele" to protein hereditary factors is one of the necessary steps toward these concepts. The basic idea that different variants of the same prion protein can be considered as alleles has been previously proposed by Chernoff and Tuite. In this paper, the notion of prion allele is further developed. We propose the idea that any prion allele is a bimodular hereditary system that depends on a certain DNA sequence (DNA determinant) and a certain epigenetic mark (epigenetic determinant). Alteration of any of these 2 determinants may lead to establishment of a new prion allele. The bimodularity principle is valid not only for hereditary prions; it seems to be universal for any epigenetic hereditary factor.

The SUMO Pathway Promotes Basic Helix-Loop-Helix Proneural Factor Activity via a Direct Effect on the Zn Finger Protein Senseless

PubMed Central

Chen, Angela; Huang, Yan Chang; Wang, Pin Yao; Kemp, Sadie E.

2012-01-01

During development, proneural transcription factors of the basic helix-loop-helix (bHLH) family are required to commit cells to a neural fate. In Drosophila neurogenesis, a key mechanism promoting sense organ precursor (SOP) fate is the synergy between proneural factors and their coactivator Senseless in transcriptional activation of target genes. Here we present evidence that posttranslational modification by SUMO enhances this synergy via an effect on Senseless protein. We show that Senseless is a direct target for SUMO modification and that mutagenesis of a predicted SUMOylation motif in Senseless reduces Senseless/proneural synergy both in vivo and in cell culture. We propose that SUMOylation of Senseless via lysine 509 promotes its synergy with proneural proteins during transcriptional activation and hence regulates an important step in neurogenesis leading to the formation and maturation of the SOPs. PMID:22586269

Quality Improvement With Discrete Event Simulation: A Primer for Radiologists.

PubMed

Booker, Michael T; O'Connell, Ryan J; Desai, Bhushan; Duddalwar, Vinay A

2016-04-01

The application of simulation software in health care has transformed quality and process improvement. Specifically, software based on discrete-event simulation (DES) has shown the ability to improve radiology workflows and systems. Nevertheless, despite the successful application of DES in the medical literature, the power and value of simulation remains underutilized. For this reason, the basics of DES modeling are introduced, with specific attention to medical imaging. In an effort to provide readers with the tools necessary to begin their own DES analyses, the practical steps of choosing a software package and building a basic radiology model are discussed. In addition, three radiology system examples are presented, with accompanying DES models that assist in analysis and decision making. Through these simulations, we provide readers with an understanding of the theory, requirements, and benefits of implementing DES in their own radiology practices. Copyright © 2016 American College of Radiology. All rights reserved.

Allelic variants of hereditary prions: The bimodularity principle

PubMed Central

Tikhodeyev, Oleg N.; Tarasov, Oleg V.; Bondarev, Stanislav A.

2017-01-01

ABSTRACT Modern biology requires modern genetic concepts equally valid for all discovered mechanisms of inheritance, either “canonical” (mediated by DNA sequences) or epigenetic. Applying basic genetic terms such as “gene” and “allele” to protein hereditary factors is one of the necessary steps toward these concepts. The basic idea that different variants of the same prion protein can be considered as alleles has been previously proposed by Chernoff and Tuite. In this paper, the notion of prion allele is further developed. We propose the idea that any prion allele is a bimodular hereditary system that depends on a certain DNA sequence (DNA determinant) and a certain epigenetic mark (epigenetic determinant). Alteration of any of these 2 determinants may lead to establishment of a new prion allele. The bimodularity principle is valid not only for hereditary prions; it seems to be universal for any epigenetic hereditary factor. PMID:28281926

A Selection Method That Succeeds!

ERIC Educational Resources Information Center

Weitman, Catheryn J.

Provided a structural selection method is carried out, it is possible to find quality early childhood personnel. The hiring process involves five definite steps, each of which establishes a base for the next. A needs assessment formulating basic minimal qualifications is the first step. The second step involves review of current job descriptions…

Steps Toward Effective Production of Speech (STEPS): No. 7--How to Take Care of Glasses.

ERIC Educational Resources Information Center

Sheeley, Eugene C.; McQuiddy, Doris

This guide, one of a series of booklets developed by Project STEPS (Steps Toward Effective Production of Speech), presents guidelines for parents of deaf-blind children regarding the care of eyeglasses. Basic concerns with glasses and contact lenses are noted and parents are advised to perform the following daily tasks: checking the frames,…

How to Design a Genetic Mating Scheme: A Basic Training Package for Drosophila Genetics

PubMed Central

Roote, John; Prokop, Andreas

2013-01-01

Drosophila melanogaster is a powerful model organism for biological research. The essential and common instrument of fly research is genetics, the art of applying Mendelian rules in the specific context of Drosophila with its unique classical genetic tools and the breadth of modern genetic tools and strategies brought in by molecular biology, transgenic technologies and the use of recombinases. Training newcomers to fly genetics is a complex and time-consuming task but too important to be left to chance. Surprisingly, suitable training resources for beginners currently are not available. Here we provide a training package for basic Drosophila genetics, designed to ensure that basic knowledge on all key areas is covered while reducing the time invested by trainers. First, a manual introduces to fly history, rationale for mating schemes, fly handling, Mendelian rules in fly, markers and balancers, mating scheme design, and transgenic technologies. Its self-study is followed by a practical training session on gender and marker selection, introducing real flies under the dissecting microscope. Next, through self-study of a PowerPoint presentation, trainees are guided step-by-step through a mating scheme. Finally, to consolidate knowledge, trainees are asked to design similar mating schemes reflecting routine tasks in a fly laboratory. This exercise requires individual feedback but also provides unique opportunities for trainers to spot weaknesses and strengths of each trainee and take remedial action. This training package is being successfully applied at the Manchester fly facility and may serve as a model for further training resources covering other aspects of fly research. PMID:23390611

A Fuzzy Goal Programming for a Multi-Depot Distribution Problem

NASA Astrophysics Data System (ADS)

Nunkaew, Wuttinan; Phruksaphanrat, Busaba

2010-10-01

A fuzzy goal programming model for solving a Multi-Depot Distribution Problem (MDDP) is proposed in this research. This effective proposed model is applied for solving in the first step of Assignment First-Routing Second (AFRS) approach. Practically, a basic transportation model is firstly chosen to solve this kind of problem in the assignment step. After that the Vehicle Routing Problem (VRP) model is used to compute the delivery cost in the routing step. However, in the basic transportation model, only depot to customer relationship is concerned. In addition, the consideration of customer to customer relationship should also be considered since this relationship exists in the routing step. Both considerations of relationships are solved using Preemptive Fuzzy Goal Programming (P-FGP). The first fuzzy goal is set by a total transportation cost and the second fuzzy goal is set by a satisfactory level of the overall independence value. A case study is used for describing the effectiveness of the proposed model. Results from the proposed model are compared with the basic transportation model that has previously been used in this company. The proposed model can reduce the actual delivery cost in the routing step owing to the better result in the assignment step. Defining fuzzy goals by membership functions are more realistic than crisps. Furthermore, flexibility to adjust goals and an acceptable satisfactory level for decision maker can also be increased and the optimal solution can be obtained.

Scientists Shaping the Discussion

NASA Astrophysics Data System (ADS)

Abraham, J. A.; Weymann, R.; Mandia, S. A.; Ashley, M.

2011-12-01

Scientific studies which directly impact the larger society require an engagement between the scientists and the larger public. With respect to research on climate change, many third-party groups report on scientific findings and thereby serve as an intermediary between the scientist and the public. In many cases, the third-party reporting misinterprets the findings and conveys inaccurate information to the media and the public. To remedy this, many scientists are now taking a more active role in conveying their work directly to interested parties. In addition, some scientists are taking the further step of engaging with the general public to answer basic questions related to climate change - even on sub-topics which are unrelated to scientists' own research. Nevertheless, many scientists are reluctant to engage the general public or the media. The reasons for scientific reticence are varied but most commonly are related to fear of public engagement, concern about the time required to properly engage the public, or concerns about the impact to their professional reputations. However, for those scientists who are successful, these engagement activities provide many benefits. Scientists can increase the impact of their work, and they can help society make informed choices on significant issues, such as mitigating global warming. Here we provide some concrete steps that scientists can take to ensure that their public engagement is successful. These steps include: (1) cultivating relationships with reporters, (2) crafting clear, easy to understand messages that summarize their work, (3) relating science to everyday experiences, and (4) constructing arguments which appeal to a wide-ranging audience. With these steps, we show that scientists can efficiently deal with concerns that would otherwise inhibit their public engagement. Various resources will be provided that allow scientists to continue work on these key steps.

Contributions of Basic Sciences to Science of Education. Studies in Educational Administration.

ERIC Educational Resources Information Center

Lall, Bernard M.

The science of education has been influenced by the basic sciences to the extent that educational research now has been able to modernize its approach by accepting and using the basic scientific methodology and experimental techniques. Using primarily the same steps of scientific investigations, education today holds a place of much greater esteem…

California Community College Handbook: Teaching Basic Skills in Vocational Education. Model Programs.

ERIC Educational Resources Information Center

Evaluation and Training Inst., Los Angeles, CA.

This handbook was produced as a result of a project that studied California community college programs that teach basic skills in vocational education programs. The project included a literature review, a telephone survey, and 12 site visits. The handbook contains four sections: (1) steps for integrating basic skills and vocational instruction;…

Toward an integrated computerized patient record.

PubMed

Dole, T R; Luberti, A A

2000-04-01

Developing a comprehensive electronic medical record system to serve ambulatory care providers in a large health care enterprise requires significant time and resources. One approach to achieving this system is to devise a series of short-term, workable solutions until a complete system is designed and implemented. The initial solution introduced a basic (mini) medical record system that provided an automated problem/summary sheet and decentralization of ambulatory-based medical records. The next step was to partner with an information system vendor committed to continued development of the long-term system capable of supporting the health care organization well into the future.

The background and theory of integrated risk management

NASA Technical Reports Server (NTRS)

Hunsucker, John L.

1995-01-01

While all good managers have always considered risk in their decision making, only recently have formal programs to do so been introduced. This report covers the logical structure behind the formulation of an integrated risk management plan (IRM). Included in the report are factors forcing the development of a formal plan to consider risk, the basic objective or purpose of an IRM, and desirable traits of such a plan. The report moves on to a discussion of background issues, seeks to formalize some definitions, and then discusses required information on threats. The report concludes with the steps for an IRM.

Automatic ground control point recognition with parallel associative memory

NASA Technical Reports Server (NTRS)

Al-Tahir, Raid; Toth, Charles K.; Schenck, Anton F.

1990-01-01

The basic principle of the associative memory is to match the unknown input pattern against a stored training set, and responding with the 'closest match' and the corresponding label. Generally, an associative memory system requires two preparatory steps: selecting attributes of the pattern class, and training the system by associating patterns with labels. Experimental results gained from using Parallel Associative Memory are presented. The primary concern is an automatic search for ground control points in aerial photographs. Synthetic patterns are tested followed by real data. The results are encouraging as a relatively high level of correct matches is reached.

Protecting your eyes in the laser operating room.

PubMed

Sallavanti, R A

1995-01-01

1. Laser protective eyewear is nearly as important to the OR nurse as the surgical mask in an operating room where laser surgery is performed. 2. Most hospitals require OR personnel to wear protective eyewear during laser procedures in voluntary compliance with American National Standards Institute (ANSI) Z136.3 for the safe use of lasers in health care facilities. 3. The basic steps to protecting your eyes are as follows: Select the appropriate eyewear (plastic or glass); make sure the eyewear fits properly; wear the protective lenses during laser testing and operation; and heed your laser safety officer.

[Development of a High Power Green Laser Therapeutic Equipment for Hyperplasia of Prostate].

PubMed

Liang, Jie; Kang, Hongxiang; Shen, Benjian; Zhao, Lusheng; Wu, Xinshe; Chen, Peng; Chang, Aihong; Guo Hua; Guo, Jiayu

2015-09-01

The basic theory of high power green laser equipment for prostate hyperplasia therapy and the components of the system developed are introduced. Considering the requirements of the clinical therapy, the working process of the high power green laser apparatus are designed and the laser with stable output at 120 W is achieved. The controlling hardware and application software are developed, and the safety step is designed. The high power green laser apparatus manufactured with characteristics of stable output, multifunctional and friendly interface provides a choices of prostate hyperplasia therapy for using nationalization instrument.

Processing of zero-derived words in English: an fMRI investigation.

PubMed

Pliatsikas, Christos; Wheeldon, Linda; Lahiri, Aditi; Hansen, Peter C

2014-01-01

Derivational morphological processes allow us to create new words (e.g. punish (V) to noun (N) punishment) from base forms. The number of steps from the basic units to derived words often varies (e.g., nationalitybridge-V) i.e., zero-derivation (Aronoff, 1980). We compared the processing of one-step (soaking

Two-step liquid phase microextraction combined with capillary electrophoresis: a new approach to simultaneous determination of basic and zwitterionic compounds.

PubMed

Nojavan, Saeed; Moharami, Arezoo; Fakhari, Ali Reza

2012-08-01

In this work, two-step hollow fiber-based liquid-phase microextraction procedure was evaluated for extraction of the zwitterionic cetirizine (CTZ) and basic hydroxyzine (HZ) in human plasma. In the first step of extraction, the pH of sample was adjusted at 5.0 in order to promote liquid-phase microextraction of the zwitterionic CTZ. In the second step, the pH of sample was increased up to 11.0 for extraction of basic HZ. In this procedure, the extraction times for the first and the second steps were 30 and 20 min, respectively. Owing to the high ratio between the volumes of donor phase and acceptor phase, CTZ and HZ were enriched by factors of 280 and 355, respectively. The linearity of the analytical method was investigated for both compounds in the range of 10-500 ng mL(-1) (R(2) > 0.999). Limit of quantification (S/N = 10) for CTZ and HZ was 10 ng mL(-1) , while the limit of detection was 3 ng mL(-1) for both compounds at a signal to noise ratio of 3:1. Intraday and interday relative standard deviations (RSDs, n = 6) were in the range of 6.5-16.2%. This procedure enabled CTZ and HZ to be analyzed simultaneously by capillary electrophoresis. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

77 FR 67340 - National Fire Codes: Request for Comments on NFPA's Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-09

... the process. The Code Revision Process contains four basic steps that are followed for developing new documents as well as revising existing documents. Step 1: Public Input Stage, which results in the First Draft Report (formerly ROP); Step 2: Comment Stage, which results in the Second Draft Report (formerly...

Generalized Models for Rock Joint Surface Shapes

PubMed Central

Du, Shigui; Hu, Yunjin; Hu, Xiaofei

2014-01-01

Generalized models of joint surface shapes are the foundation for mechanism studies on the mechanical effects of rock joint surface shapes. Based on extensive field investigations of rock joint surface shapes, generalized models for three level shapes named macroscopic outline, surface undulating shape, and microcosmic roughness were established through statistical analyses of 20,078 rock joint surface profiles. The relative amplitude of profile curves was used as a borderline for the division of different level shapes. The study results show that the macroscopic outline has three basic features such as planar, arc-shaped, and stepped; the surface undulating shape has three basic features such as planar, undulating, and stepped; and the microcosmic roughness has two basic features such as smooth and rough. PMID:25152901

[Dietary counseling in obesity].

PubMed

Meyer, Nathalie; Haslebacher, Yvonne; Teuscher-Sick, Patricia; Fischer, Beatrice

2013-02-01

Information on weight management and a healthy eating is accessible to anyone. However, recommendations are inconsistent. This often leads to confusion rather than to real changes in eating behavior. The principle of a long-term weight reduction is based on the idea of achieving negative energy balance with a healthy, balanced and slightly hypocaloric diet. The regimen is neither supposed to be rigid nor should it ban any food products or food products. Changes in eating patterns come about step by step and the counseling approach should be based on the patient's habits and capabilities. The basic requirement to successfully treat obese patients is their own motivation Therefore, the timing of launching the therapy needs to be well chosen. Apart from goals directly concerning weight loss, goals related to well-being, general health and exercise should be set and pursued. However, the main focus should be on changes of dietary behavior. Dietary counseling is preferably embedded in a multidisciplinary treatment concept.

An intelligent identification algorithm for the monoclonal picking instrument

NASA Astrophysics Data System (ADS)

Yan, Hua; Zhang, Rongfu; Yuan, Xujun; Wang, Qun

2017-11-01

The traditional colony selection is mainly operated by manual mode, which takes on low efficiency and strong subjectivity. Therefore, it is important to develop an automatic monoclonal-picking instrument. The critical stage of the automatic monoclonal-picking and intelligent optimal selection is intelligent identification algorithm. An auto-screening algorithm based on Support Vector Machine (SVM) is proposed in this paper, which uses the supervised learning method, which combined with the colony morphological characteristics to classify the colony accurately. Furthermore, through the basic morphological features of the colony, system can figure out a series of morphological parameters step by step. Through the establishment of maximal margin classifier, and based on the analysis of the growth trend of the colony, the selection of the monoclonal colony was carried out. The experimental results showed that the auto-screening algorithm could screen out the regular colony from the other, which meets the requirement of various parameters.

[Interview study on autonomous chemical management system and the contribution of occupational health specialists in companies].

PubMed

Mori, Koji; Takebayashi, Toru

2004-09-01

Under the circumstance that autonomous risk management for chemicals is required in Japan, it is necessary to define fundamental steps for developing chemical management system that are applicable in various types of companies and to understand the effective contribution of chemical or occupational health specialists to the system. For the purposes, we conducted interviews with companies which have an advanced chemical management system in Japan. As the result, each company had a certain policy about detailedness level of collected hazard and exposure information, and also had an efficient risk management system to ensure workers' health in depending on the business type and situations. Moreover, it was commonly observed that the specialists played major roles in developing tools for risk assessment and control, and then business lines led execution of the risk management with their supports. Based on the interviews, we showed a hypothesis of basic steps in introducing autonomous chemical risk management system at the workplaces. It is necessary to verify the hypothesis and to develop a simple system that is applicable to middle or small size companies as the next step.

Nonlinearly preconditioned semismooth Newton methods for variational inequality solution of two-phase flow in porous media

NASA Astrophysics Data System (ADS)

Yang, Haijian; Sun, Shuyu; Yang, Chao

2017-03-01

Most existing methods for solving two-phase flow problems in porous media do not take the physically feasible saturation fractions between 0 and 1 into account, which often destroys the numerical accuracy and physical interpretability of the simulation. To calculate the solution without the loss of this basic requirement, we introduce a variational inequality formulation of the saturation equilibrium with a box inequality constraint, and use a conservative finite element method for the spatial discretization and a backward differentiation formula with adaptive time stepping for the temporal integration. The resulting variational inequality system at each time step is solved by using a semismooth Newton algorithm. To accelerate the Newton convergence and improve the robustness, we employ a family of adaptive nonlinear elimination methods as a nonlinear preconditioner. Some numerical results are presented to demonstrate the robustness and efficiency of the proposed algorithm. A comparison is also included to show the superiority of the proposed fully implicit approach over the classical IMplicit Pressure-Explicit Saturation (IMPES) method in terms of the time step size and the total execution time measured on a parallel computer.

A GIHS-based spectral preservation fusion method for remote sensing images using edge restored spectral modulation

NASA Astrophysics Data System (ADS)

Zhou, Xiran; Liu, Jun; Liu, Shuguang; Cao, Lei; Zhou, Qiming; Huang, Huawen

2014-02-01

High spatial resolution and spectral fidelity are basic standards for evaluating an image fusion algorithm. Numerous fusion methods for remote sensing images have been developed. Some of these methods are based on the intensity-hue-saturation (IHS) transform and the generalized IHS (GIHS), which may cause serious spectral distortion. Spectral distortion in the GIHS is proven to result from changes in saturation during fusion. Therefore, reducing such changes can achieve high spectral fidelity. A GIHS-based spectral preservation fusion method that can theoretically reduce spectral distortion is proposed in this study. The proposed algorithm consists of two steps. The first step is spectral modulation (SM), which uses the Gaussian function to extract spatial details and conduct SM of multispectral (MS) images. This method yields a desirable visual effect without requiring histogram matching between the panchromatic image and the intensity of the MS image. The second step uses the Gaussian convolution function to restore lost edge details during SM. The proposed method is proven effective and shown to provide better results compared with other GIHS-based methods.

Development of a web-based and mobile app to support physical activity in individuals with rheumatoid arthritis: results from the second step of a co-design process.

PubMed

Revenäs, Åsa; Opava, Christina H; Martin, Cathrin; Demmelmaier, Ingrid; Keller, Christina; Åsenlöf, Pernilla

2015-02-09

Long-term adherence to physical activity recommendations remains challenging for most individuals with rheumatoid arthritis (RA) despite evidence for its health benefits. The aim of this study was to provide basic data on system requirement specifications for a Web-based and mobile app to self-manage physical activity. More specifically, we explored the target user group, features of the future app, and correlations between the system requirements and the established behavior change techniques (BCTs). We used a participatory action research design. Qualitative data were collected using multiple methods in four workshops. Participants were 5 individuals with RA, a clinical physiotherapist, an officer from the Swedish Rheumatism Association, a Web designer, and 2 physiotherapy researchers. A taxonomy was used to determine the degree of correlation between the system requirements and established BCTs. Participants agreed that the future Web-based and mobile app should be based on two major components important for maintaining physical activity: (1) a calendar feature for goal setting, planning, and recording of physical activity performance and progress, and (2) a small community feature for positive feedback and support from peers. All system requirements correlated with established BCTs, which were coded as 24 different BCTs. To our knowledge, this study is the first to involve individuals with RA as co-designers, in collaboration with clinicians, researchers, and Web designers, to produce basic data to generate system requirement specifications for an eHealth service. The system requirements correlated to the BCTs, making specifications of content and future evaluation of effectiveness possible.

Evaluation of Lumicyano™ cyanoacrylate fuming process for the development of latent fingermarks on plastic carrier bags by means of a pseudo operational comparative trial.

PubMed

Farrugia, Kevin J; Deacon, Paul; Fraser, Joanna

2014-03-01

There are a number of studies discussing recent developments of a one-step fluorescent cyanoacrylate process. This study is a pseudo operational trial to compare an example of a one-step fluorescent cyanoacrylate product, Lumicyano™, with the two recommended techniques for plastic carrier bags; cyanoacrylate fuming followed by basic yellow 40 (BY40) dyeing and powder suspensions. 100 plastic carrier bags were collected from the place of work and the items were treated as found without any additional fingermark deposition. The bags were split into three and after treatment with the three techniques a comparable number of fingermarks were detected by each technique (average of 300 fingermarks). The items treated with Lumicyano™ were sequentially processed with BY40 and an additional 43 new fingermarks were detected. Lumicyano™ appears to be a suitable technique for the development of fingermarks on plastic carrier bags and it can help save lab space and time as it does not require dyeing or drying procedures. Furthermore, contrary to other one-step cyanoacrylate products, existing cyanoacrylate cabinets do not require any modification for the treatment of articles with Lumicyano™. To date, there is little peer reviewed articles in the literature on trials related to Lumicyano™ and this study aims to contribute to fill this gap. © 2013.

Basic Information about EPA ExpoBox

EPA Pesticide Factsheets

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases,

Getting here: five steps forwards and four back

NASA Astrophysics Data System (ADS)

Griffin, R. Elizabeth

The concept of libraries of stellar spectra is by no means new, though access to on-line ones is a relatively recent achievement. The road to the present state has been rocky, and we are still far short of what is needed and what can easily be attained. Spectra as by-products of individual research projects are inhomogeneous, biassed, and can be dangerously inadequate for modelling complex stellar systems. Archival products are eclectic, but unique in the time domain. Getting telescope time for the required level of homogeneity, inclusivity and completeness for new libraries requires strong scientific arguments that must be competitive. Using synthetic spectra builds misconceptions into the modelling. Attempts to set up the initial requirements (archives of observed spectra) encountered dogged resistance, much of which has never been resolved. Those struggles, and the indelible effects they have upon our science, will be reviewed, and the basics of a promotional programme outlined.

A Scenario-Based Process for Requirements Development: Application to Mission Operations Systems

NASA Technical Reports Server (NTRS)

Bindschadler, Duane L.; Boyles, Carole A.

2008-01-01

The notion of using operational scenarios as part of requirements development during mission formulation (Phases A & B) is widely accepted as good system engineering practice. In the context of developing a Mission Operations System (MOS), there are numerous practical challenges to translating that notion into the cost-effective development of a useful set of requirements. These challenges can include such issues as a lack of Project-level focus on operations issues, insufficient or improper flowdown of requirements, flowdown of immature or poor-quality requirements from Project level, and MOS resource constraints (personnel expertise and/or dollars). System engineering theory must be translated into a practice that provides enough structure and standards to serve as guidance, but that retains sufficient flexibility to be tailored to the needs and constraints of a particular MOS or Project. We describe a detailed, scenario-based process for requirements development. Identifying a set of attributes for high quality requirements, we show how the portions of the process address many of those attributes. We also find that the basic process steps are robust, and can be effective even in challenging Project environments.

Standardized Procedure Content And Data Structure Based On Human Factors Requirements For Computer-Based Procedures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bly, Aaron; Oxstrand, Johanna; Le Blanc, Katya L

2015-02-01

Most activities that involve human interaction with systems in a nuclear power plant are guided by procedures. Traditionally, the use of procedures has been a paper-based process that supports safe operation of the nuclear power industry. However, the nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. Advances in digital technology make computer-based procedures (CBPs) a valid option that provides further enhancement of safety by improving human performance related to procedure use. The transition from paper-based procedures (PBPs) to CBPs creates a need for a computer-based proceduremore » system (CBPS). A CBPS needs to have the ability to perform logical operations in order to adjust to the inputs received from either users or real time data from plant status databases. Without the ability for logical operations the procedure is just an electronic copy of the paper-based procedure. In order to provide the CBPS with the information it needs to display the procedure steps to the user, special care is needed in the format used to deliver all data and instructions to create the steps. The procedure should be broken down into basic elements and formatted in a standard method for the CBPS. One way to build the underlying data architecture is to use an Extensible Markup Language (XML) schema, which utilizes basic elements to build each step in the smart procedure. The attributes of each step will determine the type of functionality that the system will generate for that step. The CBPS will provide the context for the step to deliver referential information, request a decision, or accept input from the user. The XML schema needs to provide all data necessary for the system to accurately perform each step without the need for the procedure writer to reprogram the CBPS. The research team at the Idaho National Laboratory has developed a prototype CBPS for field workers as well as the underlying data structure for such CBPS. The objective of the research effort is to develop guidance on how to design both the user interface and the underlying schema. This paper will describe the result and insights gained from the research activities conducted to date.« less

Como Trabajar y Vivir en la Realidad: Pasos Basicos Para Jovenes con Incapacidades, sus Padres y sus Profesores (How to Work and Live in the Real World: Basic Steps for Youth with Handicaps and Their Parents and Teachers).

ERIC Educational Resources Information Center

Patton, Patricia L.; And Others

This Spanish version of "How to Work and Live in the Real World: Basic Steps for Youth with Handicaps and Their Parents and Teachers" is for young people with handicaps who are getting ready to graduate from high school and begin working and living in the adult world. The booklet places a special focus on individuals with cultural…

Classifying seismic waveforms from scratch: a case study in the alpine environment

NASA Astrophysics Data System (ADS)

Hammer, C.; Ohrnberger, M.; Fäh, D.

2013-01-01

Nowadays, an increasing amount of seismic data is collected by daily observatory routines. The basic step for successfully analyzing those data is the correct detection of various event types. However, the visually scanning process is a time-consuming task. Applying standard techniques for detection like the STA/LTA trigger still requires the manual control for classification. Here, we present a useful alternative. The incoming data stream is scanned automatically for events of interest. A stochastic classifier, called hidden Markov model, is learned for each class of interest enabling the recognition of highly variable waveforms. In contrast to other automatic techniques as neural networks or support vector machines the algorithm allows to start the classification from scratch as soon as interesting events are identified. Neither the tedious process of collecting training samples nor a time-consuming configuration of the classifier is required. An approach originally introduced for the volcanic task force action allows to learn classifier properties from a single waveform example and some hours of background recording. Besides a reduction of required workload this also enables to detect very rare events. Especially the latter feature provides a milestone point for the use of seismic devices in alpine warning systems. Furthermore, the system offers the opportunity to flag new signal classes that have not been defined before. We demonstrate the application of the classification system using a data set from the Swiss Seismological Survey achieving very high recognition rates. In detail we document all refinements of the classifier providing a step-by-step guide for the fast set up of a well-working classification system.

Past, present and future of spike sorting techniques.

PubMed

Rey, Hernan Gonzalo; Pedreira, Carlos; Quian Quiroga, Rodrigo

2015-10-01

Spike sorting is a crucial step to extract information from extracellular recordings. With new recording opportunities provided by the development of new electrodes that allow monitoring hundreds of neurons simultaneously, the scenario for the new generation of algorithms is both exciting and challenging. However, this will require a new approach to the problem and the development of a common reference framework to quickly assess the performance of new algorithms. In this work, we review the basic concepts of spike sorting, including the requirements for different applications, together with the problems faced by presently available algorithms. We conclude by proposing a roadmap stressing the crucial points to be addressed to support the neuroscientific research of the near future. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Political Regime and Human Capital: A Cross-Country Analysis

ERIC Educational Resources Information Center

Klomp, Jeroen; de Haan, Jakob

2013-01-01

We examine the relationship between different dimensions of the political regime in place and human capital using a two-step structural equation model. In the first step, we employ factor analysis on 16 human capital indicators to construct two new human capital measures (basic and advanced human capital). In the second step, we estimate the…

How To Prepare Effective Overhead Projector Presentations: One Picture Is Worth a Thousand Words.

ERIC Educational Resources Information Center

National Audio-Visual Supply, East Rutherford, NJ.

Designed to help create effective presentations, this guide describes the basic techniques and provides hints for producing professional, attention-getting overhead transparencies in a step-by-step procedure format. Eight topics are addressed in the guide: (1) eight steps to a successful meeting presentation; (2) advantages of overhead projection;…

An Educational Multimedia Presentation on the Introduction to Spacecraft Charging

NASA Technical Reports Server (NTRS)

Lin, E.; dePayrebrune, M.

2004-01-01

Over the last few decades, significant knowledge has been gained in how to protect spacecraft from charging; however, the continuing technical advancement in the design and build of satellites requires on-going effort in the study of spacecraft charging. A situation that we have encountered is that not all satellite designers and builders are familiar with the problem of spacecraft charging. The design of a satellite involves many talented people with diverse backgrounds, ranging from manufacturing and assembly to engineering and program management. The complex design and build of a satellite system requires people with highly specialized skills such that cross-specialization is often not achievable. As a result, designers and builders of satellites are not usually familiar with the problems outside their specialization. This is also true for spacecraft charging. Not everyone is familiar with the definition of spacecraft charging and the damage that spacecraft charging can cause. Understanding the problem is an important first step in getting everyone involved in addressing the appropriate spacecraft charging issues during the satellite design and build phases. To address this important first step, an educational multimedia presentation has been created to inform the general engineering community about the basics of spacecraft charging. The content of this educational presentation is based on relevant published technical papers. The presentation was developed using Macromedia Flash. This software produces a more dynamic learning environment than a typical slide show , resulting in a more effective learning experience. The end result is that the viewer will have learned about the basics of spacecraft charging. This presentation is available to the public through our website, www.dplscience.com, free of charge. Viewers are encouraged to pass this presentation to colleagues within their own work environment. This paper describes the content of the multimedia presentation.

Basic Steps to Using the Energy Savings Plus Health Guidelines

EPA Pesticide Factsheets

he Energy Savings Plus Health Guide equips school districts to integrate indoor air quality protections into school energy efficiency retrofits and other building upgrade projects. This document describes steps to using the Energy Savings Plus Health guide

Segmentation and Quantitative Analysis of Apoptosis of Chinese Hamster Ovary Cells from Fluorescence Microscopy Images.

PubMed

Du, Yuncheng; Budman, Hector M; Duever, Thomas A

2017-06-01

Accurate and fast quantitative analysis of living cells from fluorescence microscopy images is useful for evaluating experimental outcomes and cell culture protocols. An algorithm is developed in this work to automatically segment and distinguish apoptotic cells from normal cells. The algorithm involves three steps consisting of two segmentation steps and a classification step. The segmentation steps are: (i) a coarse segmentation, combining a range filter with a marching square method, is used as a prefiltering step to provide the approximate positions of cells within a two-dimensional matrix used to store cells' images and the count of the number of cells for a given image; and (ii) a fine segmentation step using the Active Contours Without Edges method is applied to the boundaries of cells identified in the coarse segmentation step. Although this basic two-step approach provides accurate edges when the cells in a given image are sparsely distributed, the occurrence of clusters of cells in high cell density samples requires further processing. Hence, a novel algorithm for clusters is developed to identify the edges of cells within clusters and to approximate their morphological features. Based on the segmentation results, a support vector machine classifier that uses three morphological features: the mean value of pixel intensities in the cellular regions, the variance of pixel intensities in the vicinity of cell boundaries, and the lengths of the boundaries, is developed for distinguishing apoptotic cells from normal cells. The algorithm is shown to be efficient in terms of computational time, quantitative analysis, and differentiation accuracy, as compared with the use of the active contours method without the proposed preliminary coarse segmentation step.

Ten steps to conducting health professional education research.

PubMed

Scott, Karen; Caldwell, Patrina; Schuwirth, Lambert

2015-08-01

The approaches used to educate future clinicians must be continually improved through evidence-based methods. Clinicians interested in conducting education research need to understand the terminology and conventions of health professional education, in the same way that health professional educators from education backgrounds need to be aware of clinical practices and scientific mores and jargon. This article provides clinicians with 10 steps to conducting health professional education research, and encourages collaboration between clinicians interested in education and health professional educators. The basic steps in conducting education research are introduced, beginning with literature searches, using appropriate terminology and writing conventions, and finding research collaborators. We encourage researchers to ask themselves, 'So what?' about their research idea to ensure it is interesting and relevant to a journal's readers. The nuts and bolts of educational research are then presented, including research questions and methodologies, outcome measures, theoretical frameworks and epistemologies. The final two steps aim to foster internationally relevant and well-designed research studies. Conducting and publishing education research is often difficult for clinicians, who struggle with what is required. Yet clinicians who teach are ideally placed to identify the knowledge gaps about how we can more effectively educate future clinicians. These 10 steps provide clinicians with guidance on how to conduct education research so relevant research findings can inform the education of future clinicians. Conducting and publishing education research is often difficult for clinicians. © 2015 John Wiley & Sons Ltd.

Workplace Basics: The Skills Employers Want.

ERIC Educational Resources Information Center

Carnevale, Anthony P.; And Others

1989-01-01

Identifies the basic skills needed by workers to function in today's high technology workplace. Examines ways of training employees in learning and communication skills, adaptability, personal management, group effectiveness, and organizational leadership. Describes the eight-step training approach used by Mazda Motor Manufacturing Corporation.…

Crew awareness as key to optimizing habitability standards onboard naval platforms: A 'back-to-basics' approach.

PubMed

Neelakantan, Anand; Ilankumaran, Mookkiah; Ray, Sougat

2017-10-01

A healthy habitable environment onboard warships is vital to operational fleet efficiency and fit sea-warrier force. Unique man-machine-armament interface issues and consequent constraints on habitability necessitate a multi-disciplinary approach toward optimizing habitability standards. Study of the basic 'human factor', including crew awareness on what determines shipboard habitability, and its association with habitation specifications is an essential step in such an approach. The aim of this study was to assess crew awareness on shipboard habitability and the association between awareness and maintenance of optimal habitability as per specifications. A cross-sectional descriptive study was carried out among 552 naval personnel onboard warships in Mumbai. Data on crew awareness on habitability was collected using a standardized questionnaire, and correlated with basic habitability requirement specifications. Data was analyzed using Microsoft Excel, Epi-info, and SPSS version 17. Awareness level on basic habitability aspects was very good in 65.3% of crew. Area-specific awareness was maximum with respect to living area (95.3%). Knowledge levels on waste management were among the lowest (65.2%) in the category of aspect-wise awareness. Statistically significant association was found between awareness levels and habitability standards (OR = 7.27). The new benchmarks set in the form of high crew awareness levels on basic shipboard habitability specifications and its significant association with standards needs to be sustained. It entails re-iteration of healthy habitation essentials into training; and holds the key to a fit fighting force.

Teaching of Basic Posture Skills in Visually Impaired Individuals and Its Implementation under Aggravated Conditions

ERIC Educational Resources Information Center

Suveren-Erdogan, Ceren; Suveren, Sibel

2018-01-01

The aim of this study is to enable basic posture exercises to be included in the basic exercises of the visually impaired individuals as a step to learn more difficult movements, to guide the instructors in order to make efficient progress in a short time and to help more numbers of disabled individuals benefit from these studies. Method: 15…

Maximum relative speeds of living organisms: Why do bacteria perform as fast as ostriches?

NASA Astrophysics Data System (ADS)

Meyer-Vernet, Nicole; Rospars, Jean-Pierre

2016-12-01

Self-locomotion is central to animal behaviour and survival. It is generally analysed by focusing on preferred speeds and gaits under particular biological and physical constraints. In the present paper we focus instead on the maximum speed and we study its order-of-magnitude scaling with body size, from bacteria to the largest terrestrial and aquatic organisms. Using data for about 460 species of various taxonomic groups, we find a maximum relative speed of the order of magnitude of ten body lengths per second over a 1020-fold mass range of running and swimming animals. This result implies a locomotor time scale of the order of one tenth of second, virtually independent on body size, anatomy and locomotion style, whose ubiquity requires an explanation building on basic properties of motile organisms. From first-principle estimates, we relate this generic time scale to other basic biological properties, using in particular the recent generalisation of the muscle specific tension to molecular motors. Finally, we go a step further by relating this time scale to still more basic quantities, as environmental conditions at Earth in addition to fundamental physical and chemical constants.

Impacts on Emergency Department Visits from Personal Responsibility Provisions: Evidence from West Virginia's Medicaid Redesign.

PubMed

Gurley-Calvez, Tami; Kenney, Genevieve M; Simon, Kosali I; Wissoker, Douglas

2016-08-01

To examine the impact of a 2007 redesign of West Virginia's Medicaid program, which included an incentive and "nudging" scheme intended to encourage better health care behaviors and reduce Emergency Department (ED) visits. West Virginia Medicaid enrollment and claims data from 2005 to 2010. We utilized a "differences in differences" technique with individual and time fixed effects to assess the impact of redesign on ED visits. Starting in 2007, categorically eligible Medicaid beneficiaries were moved from traditional Medicaid to the new Mountain Health Choices (MHC) Program on a rolling basis, approximating a natural experiment. Members chose between a Basic plan, which was less generous than traditional Medicaid, or an Enhanced plan, which was more generous but required additional enrollment steps. Data were obtained from the West Virginia Bureau for Medical Services. We found that contrary to intentions, the MHC program increased ED visits. Those who selected or defaulted into the Basic plan experienced increased overall and preventable ED visits, while those who selected the Enhanced plan experienced a slight reduction in preventable ED visits; the net effect was an increase in ED visits, as most individuals enrolled in the Basic plan. © Health Research and Educational Trust.

Muscle Satellite Cells: Exploring the Basic Biology to Rule Them.

PubMed

Almeida, Camila F; Fernandes, Stephanie A; Ribeiro Junior, Antonio F; Keith Okamoto, Oswaldo; Vainzof, Mariz

2016-01-01

Adult skeletal muscle is a postmitotic tissue with an enormous capacity to regenerate upon injury. This is accomplished by resident stem cells, named satellite cells, which were identified more than 50 years ago. Since their discovery, many researchers have been concentrating efforts to answer questions about their origin and role in muscle development, the way they contribute to muscle regeneration, and their potential to cell-based therapies. Satellite cells are maintained in a quiescent state and upon requirement are activated, proliferating, and fusing with other cells to form or repair myofibers. In addition, they are able to self-renew and replenish the stem pool. Every phase of satellite cell activity is highly regulated and orchestrated by many molecules and signaling pathways; the elucidation of players and mechanisms involved in satellite cell biology is of extreme importance, being the first step to expose the crucial points that could be modulated to extract the optimal response from these cells in therapeutic strategies. Here, we review the basic aspects about satellite cells biology and briefly discuss recent findings about therapeutic attempts, trying to raise questions about how basic biology could provide a solid scaffold to more successful use of these cells in clinics.

Parallel processing of real-time dynamic systems simulation on OSCAR (Optimally SCheduled Advanced multiprocessoR)

NASA Technical Reports Server (NTRS)

Kasahara, Hironori; Honda, Hiroki; Narita, Seinosuke

1989-01-01

Parallel processing of real-time dynamic systems simulation on a multiprocessor system named OSCAR is presented. In the simulation of dynamic systems, generally, the same calculation are repeated every time step. However, we cannot apply to Do-all or the Do-across techniques for parallel processing of the simulation since there exist data dependencies from the end of an iteration to the beginning of the next iteration and furthermore data-input and data-output are required every sampling time period. Therefore, parallelism inside the calculation required for a single time step, or a large basic block which consists of arithmetic assignment statements, must be used. In the proposed method, near fine grain tasks, each of which consists of one or more floating point operations, are generated to extract the parallelism from the calculation and assigned to processors by using optimal static scheduling at compile time in order to reduce large run time overhead caused by the use of near fine grain tasks. The practicality of the scheme is demonstrated on OSCAR (Optimally SCheduled Advanced multiprocessoR) which has been developed to extract advantageous features of static scheduling algorithms to the maximum extent.

Teaching Mathematical Modelling for Earth Sciences via Case Studies

NASA Astrophysics Data System (ADS)

Yang, Xin-She

2010-05-01

Mathematical modelling is becoming crucially important for earth sciences because the modelling of complex systems such as geological, geophysical and environmental processes requires mathematical analysis, numerical methods and computer programming. However, a substantial fraction of earth science undergraduates and graduates may not have sufficient skills in mathematical modelling, which is due to either limited mathematical training or lack of appropriate mathematical textbooks for self-study. In this paper, we described a detailed case-study-based approach for teaching mathematical modelling. We illustrate how essential mathematical skills can be developed for students with limited training in secondary mathematics so that they are confident in dealing with real-world mathematical modelling at university level. We have chosen various topics such as Airy isostasy, greenhouse effect, sedimentation and Stokes' flow,free-air and Bouguer gravity, Brownian motion, rain-drop dynamics, impact cratering, heat conduction and cooling of the lithosphere as case studies; and we use these step-by-step case studies to teach exponentials, logarithms, spherical geometry, basic calculus, complex numbers, Fourier transforms, ordinary differential equations, vectors and matrix algebra, partial differential equations, geostatistics and basic numeric methods. Implications for teaching university mathematics for earth scientists for tomorrow's classroom will also be discussed. Refereces 1) D. L. Turcotte and G. Schubert, Geodynamics, 2nd Edition, Cambridge University Press, (2002). 2) X. S. Yang, Introductory Mathematics for Earth Scientists, Dunedin Academic Press, (2009).

Treating the Tough Adolescent: A Family-Based, Step-by-Step Guide. The Guilford Family Therapy Series.

ERIC Educational Resources Information Center

Sells, Scott P.

A model for treating difficult adolescents and their families is presented. Part 1 offers six basic assumptions about the causes of severe behavioral problems and presents the treatment model with guidelines necessary to address each of these six causes. Case examples highlight and clarify major points within each of the 15 procedural steps of the…

Measured Plume Dispersion Parameters Over Water. Volume 1.

DTIC Science & Technology

1984-09-01

meteorlogical parameters were continuously monitored at various locations. Tracer gas concentrations were measured by a variety of methods at...addition, this step added a header . to the data set containing a variety of averaged meteorlogical quantities. The basic procedure in this step was

A Three-Step Approach to Veterinary Medical Education

ERIC Educational Resources Information Center

Kavanaugh, J. F.

1976-01-01

A formal education plan with two admission steps is outlined. Animal agriculture and the basic sciences are combined in a two-year middle stage. The medical education (third stage) that specifically addresses pathology and the clinical sciences encompasses three years. (Author/LBH)

Two-step voltage dual electromembrane extraction: A new approach to simultaneous extraction of acidic and basic drugs.

PubMed

Asadi, Sakine; Nojavan, Saeed

2016-06-07

In the present work, acidic and basic drugs were simultaneously extracted by a novel method of high efficiency herein referred to as two-step voltage dual electromembrane extraction (TSV-DEME). Optimizing effective parameters such as composition of organic liquid membrane, pH values of donor and acceptor solutions, voltage and duration of each step, the method had its figures of merit investigated in pure water, human plasma, wastewater, and breast milk samples. Simultaneous extraction of acidic and basic drugs was done by applying potentials of 150 V and 400 V for 6 min and 19 min as the first and second steps, respectively. The model compounds were extracted from 4 mL of sample solution (pH = 6) into 20 μL of each acceptor solution (32 mM NaOH for acidic drugs and 32 mM HCL for basic drugs). 1-Octanol was immobilized within the pores of a porous hollow fiber of polypropylene, as the supported liquid membrane (SLM) for acidic drugs, and 2-ethyle hexanol, as the SLM for basic drugs. The proposed TSV-DEME technique provided good linearity with the resulting correlation coefficients ranging from 0.993 to 0.998 over a concentration range of 1-1000 ng mL(-1). The limit of detections of the drugs were found to range within 0.3-1.5 ng mL(-1), while the corresponding repeatability ranged from 7.7 to 15.5% (n = 4). The proposed method was further compared to simple dual electromembrane extraction (DEME), indicating significantly higher recoveries for TSV-DEME procedure (38.1-68%), as compared to those of simple DEME procedure (17.7-46%). Finally, the optimized TSV-DEME was applied to extract and quantify model compounds in breast milk, wastewater, and plasma samples. Copyright © 2016 Elsevier B.V. All rights reserved.

a Schema for Extraction of Indoor Pedestrian Navigation Grid Network from Floor Plans

NASA Astrophysics Data System (ADS)

Niu, Lei; Song, Yiquan

2016-06-01

The requirement of the indoor navigation related tasks such emergency evacuation calls for efficient solutions for handling data sources. Therefore, the navigation grid extraction from existing floor plans draws attentions. To this, we have to thoroughly analyse the source data, such as Autocad dxf files. Then, we could establish a sounding navigation solution, which firstly complements the basic navigation rectangle boundaries, secondly subdivides these rectangles and finally generates accessible networks with these refined rectangles. Test files are introduced to validate the whole workflow and evaluate the solution performance. In conclusion, we have achieved the preliminary step of forming up accessible network from the navigation grids.

Standardisation of costs: the Dutch Manual for Costing in economic evaluations.

PubMed

Oostenbrink, Jan B; Koopmanschap, Marc A; Rutten, Frans F H

2002-01-01

The lack of a uniform costing methodology is often considered a weakness of economic evaluations that hinders the interpretation and comparison of studies. Standardisation is therefore an important topic within the methodology of economic evaluations and in national guidelines that formulate the formal requirements for studies to be considered when deciding on the reimbursement of new medical therapies. Recently, the Dutch Manual for Costing: Methods and Standard Costs for Economic Evaluations in Health Care (further referred to as "the manual") has been published, in addition to the Dutch guidelines for pharmacoeconomic research. The objectives of this article are to describe the main content of the manual and to discuss some key issues of the manual in relation to the standardisation of costs. The manual introduces a six-step procedure for costing. These steps concern: the scope of the study;the choice of cost categories;the identification of units;the measurement of resource use;the monetary valuation of units; andthe calculation of unit costs. Each step consists of a number of choices and these together define the approach taken. In addition to a description of the costing process, five key issues regarding the standardisation of costs are distinguished. These are the use of basic principles, methods for measurement and valuation, standard costs (average prices of healthcare services), standard values (values that can be used within unit cost calculations), and the reporting of outcomes. The use of the basic principles, standard values and minimal requirements for reporting outcomes, as defined in the manual, are obligatory in studies that support submissions to acquire reimbursement for new pharmaceuticals. Whether to use standard costs, and the choice of a particular method to measure or value costs, is left mainly to the investigator, depending on the specific study setting. In conclusion, several instruments are available to increase standardisation in costing methodology among studies. These instruments have to be used in such a way that a balance is found between standardisation and the specific setting in which a study is performed. The way in which the Dutch manual tries to reach this balance can serve as an illustration for other countries.

Basic Internet Software Toolkit.

ERIC Educational Resources Information Center

Buchanan, Larry

1998-01-01

Once schools are connected to the Internet, the next step is getting network workstations configured for Internet access. This article describes a basic toolkit comprising software currently available on the Internet for free or modest cost. Lists URLs for Web browser, Telnet, FTP, file decompression, portable document format (PDF) reader,…

Inculcating Quality Concepts in the US Air Force: Right Music, Wrong Step

DTIC Science & Technology

1994-04-01

CONCEPTS IN THE US AIR FORCE: RIGHT MUSIC , WRONG STEP Acceslon For NTIS CRA&J DTIC TAB Unannounced fJ by Justification Barbara A. Kucharczyk By. Lieutenant...TITLE: Inculcating Quality Concepts in the US Air Force: Right Music , Wrong Step AUTHOR: Barbara A. Kucharczyk, Lieutenant Colonel, USAF In its...perceived attitudinal backlash.4 While basic quality concepts are certainly the right music , many Air Force members are dancing the wrong step. Why? This

On humanity's role in space

NASA Technical Reports Server (NTRS)

Von Puttkamer, J.

1978-01-01

Manned spaceflight is considered within the framework of two broad categories: human exploitation of space for economic or scientific gain, and human habitation of space as a place where man may live, grow, and actualize himself. With the advent of the Space Shuttle, exploitation of space will take the form of new product development. This will continue during the 1990s as the new products are manufactured on a scale large enough to be profitable. The turn of the century should see major industries in space, and large space habitats. Thus, the question of mankind's existential needs arises. In addition to basic physical needs, the spiritual and cultural requirements of human beings must be considered. The impact of man's presence in space upon human culture in general is discussed with reference to international cooperation, public interest in space programs, scientific advancement, the basic urge to explore, and the density of mankind as a whole; which will become free of external constraints as we step into the cosmos.

Object-oriented approach to fast display of electrophysiological data under MS-windows.

PubMed

Marion-Poll, F

1995-12-01

Microcomputers provide neuroscientists an alternative to a host of laboratory equipment to record and analyze electrophysiological data. Object-oriented programming tools bring an essential link between custom needs for data acquisition and analysis with general software packages. In this paper, we outline the layout of basic objects that display and manipulate electrophysiological data files. Visual inspection of the recordings is a basic requirement of any data analysis software. We present an approach that allows flexible and fast display of large data sets. This approach involves constructing an intermediate representation of the data in order to lower the number of actual points displayed while preserving the aspect of the data. The second group of objects is related to the management of lists of data files. Typical experiments designed to test the biological activity of pharmacological products include scores of files. Data manipulation and analysis are facilitated by creating multi-document objects that include the names of all experiment files. Implementation steps of both objects are described for an MS-Windows hosted application.

Development of an ultra-safe rechargeable lithium-ion battery

NASA Astrophysics Data System (ADS)

Jacobs, J. K.

1994-11-01

The project activities had an official start on August 15. Based on previous work, a statement of the basic design framework to be used was an important first step. The basic cell is to be a bonded flat-pack containing all active cell components in a sealed envelope. Cell integrity is to be provided by internal bonding, and not through external support. This design approach is fundamentally different from that commonly used in wound and hard-case cells, and has the advantage of ease of scaling for a variety of different form factors. An innovative variant on the fan-fold geometry has been chosen for its manufacturability advantages. Equipment capable of handling the semi-continuous requirements of the fan-fold structure had already been outlined. There are specific advantages in at least three areas: (1) Control of dimensional tolerances; (2) Production rate; (3) Connection of power lead-outs and final assembly. Cell chemistry is viewed to be of less fundamental importance than structural considerations within the bounds of the lithium-ion concept.

Maize - GO annotation methods, evaluation, and review (Maize-GAMER)

USDA-ARS?s Scientific Manuscript database

Making a genome sequence accessible and useful involves three basic steps: genome assembly, structural annotation, and functional annotation. The quality of data generated at each step influences the accuracy of inferences that can be made, with high-quality analyses produce better datasets resultin...

The two-step assemblies of basic-amino-Acid-rich Peptide with a highly charged polyoxometalate.

PubMed

Zhang, Teng; Li, Hong-Wei; Wu, Yuqing; Wang, Yizhan; Wu, Lixin

2015-06-15

Two-step assembly of a peptide from HPV16 L1 with a highly charged europium-substituted polyoxometalate (POM) cluster, accompanying a great luminescence enhancement of the inorganic polyanions, is reported. The mechanism is discussed in detail by analyzing the thermodynamic parameters from isothermal titration calorimetry (ITC), time-resolved fluorescent and NMR spectra. By comparing the actions of the peptide analogues, a binding process and model are proposed accordingly. The driving forces in each binding step are clarified, and the initial POM aggregation, basic-sequence and hydrophobic C termini of peptide are revealed to contribute essentially to the two-step assembly. The present study demonstrates both a meaningful preparation for bioinorganic materials and a strategy using POMs to modulate the assembly of peptides and even proteins, which could be extended to other proteins and/or viruses by using peptides and POMs with similar properties. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Conceptual analysis of Physiology of vision in Ayurveda.

PubMed

Balakrishnan, Praveen; Ashwini, M J

2014-07-01

The process by which the world outside is seen is termed as visual process or physiology of vision. There are three phases in this visual process: phase of refraction of light, phase of conversion of light energy into electrical impulse and finally peripheral and central neurophysiology. With the advent of modern instruments step by step biochemical changes occurring at each level of the visual process has been deciphered. Many investigations have emerged to track these changes and helping to diagnose the exact nature of the disease. Ayurveda has described this physiology of vision based on the functions of vata and pitta. Philosophical textbook of ayurveda, Tarka Sangraha, gives certain basics facts of visual process. This article discusses the second and third phase of visual process. Step by step analysis of the visual process through the spectacles of ayurveda amalgamated with the basics of philosophy from Tarka Sangraha has been analyzed critically to generate a concrete idea regarding the physiology and hence thereby interpret the pathology on the grounds of ayurveda based on the investigative reports.

Projector Center: Replication, Transcription, and Translation.

ERIC Educational Resources Information Center

Ruth, Edward B.

1984-01-01

Describes the use of a chart that systematically summarizes three basic steps that involve DNA and its decoding in both eukaryotic and prokaryotic cells: replication; transcription, and translation. Indicates that the chart (mounted on a tranparency) does an adequate job of conveying basic information about nucleic acids to students. (DH)

Project Logic Handbook: Computer Literacy through BASIC.

ERIC Educational Resources Information Center

Huber, Leonard; And Others

This handbook for teachers offers guidance on introducing computer literacy into elementary and secondary classrooms. It includes a list of computer concepts exemplified by each step in learning to write programs in BASIC Programming Language and the objectives for the elementary and secondary activities; suggestions for using computers in…

BASIC STEPS IN DESIGNING SCIENCE LABORATORIES.

ERIC Educational Resources Information Center

WHITNEY, FRANK L.

PLANNERS OF CURRENT UNIVERSITY LABORATORIES OFTEN MAKE THE SAME MISTAKES MADE BY INDUSTRIAL LABORATORIES 20 YEARS AGO. THIS CAN BE REMEDIED BY INCREASED COMMUNICATION BETWEEN SCIENTISTS AND DESIGNERS IN SEMINARS DEFINING THE BASIC NEEDS OF A PARTICULAR LABORATORY SITUATION. ELECTRONIC AND MECHANICAL EQUIPMENT ACCOUNT FOR OVER 50 PER CENT OF TOTAL…

42 CFR 417.472 - Basic contract requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Basic contract requirements. 417.472 Section 417.472 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... PREPAYMENT PLANS Medicare Contract Requirements § 417.472 Basic contract requirements. (a) Submittal of...

From Diapers to Dating. A Parent's Guide to Raising Sexually Healthy Children.

ERIC Educational Resources Information Center

Haffner, Debra W.

This step-by-step program for raising sexually healthy children helps parents provide accurate information and communicate their own values to their children. Chapter 1, "The Basics"; includes "Sexually Healthy Families"; "The Key: Finding Teachable Moments"; and "Guidelines for Communication." Chapter 2,…

Audiovisual Fundamentals; Basic Equipment Operation and Simple Materials Production.

ERIC Educational Resources Information Center

Bullard, John R.; Mether, Calvin E.

A guide illustrated with simple sketches explains the functions and step-by-step uses of audiovisual (AV) equipment. Principles of projection, audio, AV equipment, lettering, limited-quantity and quantity duplication, and materials preservation are outlined. Apparatus discussed include overhead, opaque, slide-filmstrip, and multiple-loading slide…

A Reference Unit on Home Vegetable Gardening.

ERIC Educational Resources Information Center

McCully, James S., Comp.; And Others

Designed to provide practical, up-to-date, basic information on home gardening for vocational agriculture students with only a limited knowledge of vegetable gardening, this reference unit includes step-by-step procedures for planning, planting, cultivating, harvesting, and processing vegetables in a small plot. Topics covered include plot…

42 CFR 1007.5 - Basic requirement.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Basic requirement. 1007.5 Section 1007.5 Public... STATE MEDICAID FRAUD CONTROL UNITS § 1007.5 Basic requirement. A State Medicaid fraud control unit must... requirements of §§ 1007.7 through 1007.13 of this part. ...

23 CFR 1340.3 - Basic design requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE § 1340.3 Basic design requirements. Surveys conducted in... requirement. The sample identified for the survey shall have a probability-based design such that estimates... 23 Highways 1 2010-04-01 2010-04-01 false Basic design requirements. 1340.3 Section 1340.3...

23 CFR 1340.3 - Basic design requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE § 1340.3 Basic design requirements. Surveys conducted in... requirement. The sample identified for the survey shall have a probability-based design such that estimates... 23 Highways 1 2011-04-01 2011-04-01 false Basic design requirements. 1340.3 Section 1340.3...

Overcoming the detection bandwidth limit in precision spectroscopy: The analytical apparatus function for a stepped frequency scan

NASA Astrophysics Data System (ADS)

Rohart, François

2017-01-01

In a previous paper [Rohart et al., Phys Rev A 2014;90(042506)], the influence of detection-bandwidth properties on observed line-shapes in precision spectroscopy was theoretically modeled for the first time using the basic model of a continuous sweeping of the laser frequency. Specific experiments confirmed general theoretical trends but also revealed several insufficiencies of the model in case of stepped frequency scans. As a consequence in as much as up-to-date experiments use step-by-step frequency-swept lasers, a new model of the influence of the detection-bandwidth is developed, including a realistic timing of signal sampling and frequency changes. Using Fourier transform techniques, the resulting time domain apparatus function gets a simple analytical form that can be easily implemented in line-shape fitting codes without any significant increase of computation durations. This new model is then considered in details for detection systems characterized by 1st and 2nd order bandwidths, underlining the importance of the ratio of detection time constant to frequency step duration, namely for the measurement of line frequencies. It also allows a straightforward analysis of corresponding systematic deviations on retrieved line frequencies and broadenings. Finally, a special attention is paid to consequences of a finite detection-bandwidth in Doppler Broadening Thermometry, namely to experimental adjustments required for a spectroscopic determination of the Boltzmann constant at the 1-ppm level of accuracy. In this respect, the interest of implementing a Butterworth 2nd order filter is emphasized.

Transportation systems evaluation methodology development and applications, phase 3

NASA Technical Reports Server (NTRS)

Kuhlthau, A. R.; Jacobson, I. D.; Richards, L. C.

1981-01-01

Transportation systems or proposed changes in current systems are evaluated. Four principal evaluation criteria are incorporated in the process, operating performance characteristics as viewed by potential users, decisions based on the perceived impacts of the system, estimating what is required to reduce the system to practice; and predicting the ability of the concept to attract financial support. A series of matrix multiplications in which the various matrices represent evaluations in a logical sequence of the various discrete steps in a management decision process is used. One or more alternatives are compared with the current situation, and the result provides a numerical rating which determines the desirability of each alternative relative to the norm and to each other. The steps in the decision process are isolated so that contributions of each to the final result are readily analyzed. The ability to protect against bias on the part of the evaluators, and the fact that system parameters which are basically qualitative in nature can be easily included are advantageous.

Fundamental Fractal Antenna Design Process

NASA Astrophysics Data System (ADS)

Zhu, L. P.; Kim, T. C.; Kakas, G. D.

2017-12-01

Antenna designers are always looking to come up with new ideas to push the envelope for new antennas, using a smaller volume while striving for higher bandwidth, wider bandwidth, and antenna gain. One proposed method of increasing bandwidth or shrinking antenna size is via the use of fractal geometry, which gives rise to fractal antennas. Fractals are those fun shapes that if one zooms in or zoom out, the structure is always the same. Design a new type of antenna based on fractal antenna design by utilize the Design of Experiment (DOE) will be shown in fractal antenna design process. Investigate conformal fractal antenna design for patterns, dimensions, and size, of the antenna but maintaining or improving the antenna performance. Research shows an antenna designer how to create basic requirements of the fractal antenna through a step by step process, and provides how to optimize the antenna design with the model prediction, lab measurement, and actual results from the compact range measurement on the antenna patterns.

[Application of virtual instrumentation technique in toxicological studies].

PubMed

Moczko, Jerzy A

2005-01-01

Research investigations require frequently direct connection of measuring equipment to the computer. Virtual instrumentation technique considerably facilitates programming of sophisticated acquisition-and-analysis procedures. In standard approach these two steps are performed subsequently with separate software tools. The acquired data are transfered with export / import procedures of particular program to the another one which executes next step of analysis. The described procedure is cumbersome, time consuming and may be potential source of the errors. In 1987 National Instruments Corporation introduced LabVIEW language based on the concept of graphical programming. Contrary to conventional textual languages it allows the researcher to concentrate on the resolved problem and omit all syntactical rules. Programs developed in LabVIEW are called as virtual instruments (VI) and are portable among different computer platforms as PCs, Macintoshes, Sun SPARCstations, Concurrent PowerMAX stations, HP PA/RISK workstations. This flexibility warrants that the programs prepared for one particular platform would be also appropriate to another one. In presented paper basic principles of connection of research equipment to computer systems were described.

Imaging a Large Sample with Selective Plane Illumination Microscopy Based on Multiple Fluorescent Microsphere Tracking

NASA Astrophysics Data System (ADS)

Ryu, Inkeon; Kim, Daekeun

2018-04-01

A typical selective plane illumination microscopy (SPIM) image size is basically limited by the field of view, which is a characteristic of the objective lens. If an image larger than the imaging area of the sample is to be obtained, image stitching, which combines step-scanned images into a single panoramic image, is required. However, accurately registering the step-scanned images is very difficult because the SPIM system uses a customized sample mount where uncertainties for the translational and the rotational motions exist. In this paper, an image registration technique based on multiple fluorescent microsphere tracking is proposed in the view of quantifying the constellations and measuring the distances between at least two fluorescent microspheres embedded in the sample. Image stitching results are demonstrated for optically cleared large tissue with various staining methods. Compensation for the effect of the sample rotation that occurs during the translational motion in the sample mount is also discussed.

Intracellular signaling pathways required for rat vascular smooth muscle cell migration. Interactions between basic fibroblast growth factor and platelet-derived growth factor.

PubMed Central

Bilato, C; Pauly, R R; Melillo, G; Monticone, R; Gorelick-Feldman, D; Gluzband, Y A; Sollott, S J; Ziman, B; Lakatta, E G; Crow, M T

1995-01-01

Intracellular signaling pathways activated by both PDGF and basic fibroblast growth factor (bFGF) have been implicated in the migration of vascular smooth muscle cells (VSMC), a key step in the pathogenesis of many vascular diseases. We demonstrate here that, while bFGF is a weak chemoattractant for VSMCs, it is required for the PDGF-directed migration of VSMCs and the activation of calcium/calmodulin-dependent protein kinase II (CamKinase II), an intracellular event that we have previously shown to be important in the regulation of VSMC migration. Neutralizing antibodies to bFGF caused a dramatic reduction in the size of the intracellular calcium transient normally seen after PDGF stimulation and inhibited both PDGF-directed VSMC migration and CamKinase II activation. Partially restoring the calcium transient with ionomycin restored migration and CamKinase II activation as did the forced expression of a mutant CamKinase II that had been "locked" in the active state by site-directed mutagenesis. These results suggest that bFGF links PDGF receptor stimulation to changes in intracellular calcium and CamKinase II activation, reinforcing the central role played by CamKinase II in regulating VSMC migration. Images PMID:7560082

Assessment and Communication for People with Disorders of Consciousness.

PubMed

Ortner, Rupert; Allison, Brendan Z; Pichler, Gerald; Heilinger, Alexander; Sabathiel, Nikolaus; Guger, Christoph

2017-08-01

In this experiment, we demonstrate a suite of hybrid Brain-Computer Interface (BCI)-based paradigms that are designed for two applications: assessing the level of consciousness of people unable to provide motor response and, in a second stage, establishing a communication channel for these people that enables them to answer questions with either 'yes' or 'no'. The suite of paradigms is designed to test basic responses in the first step and to continue to more comprehensive tasks if the first tests are successful. The latter tasks require more cognitive functions, but they could provide communication, which is not possible with the basic tests. All assessment tests produce accuracy plots that show whether the algorithms were able to detect the patient's brain's response to the given tasks. If the accuracy level is beyond the significance level, we assume that the subject understood the task and was able to follow the sequence of commands presented via earphones to the subject. The tasks require users to concentrate on certain stimuli or to imagine moving either the left or right hand. All tasks are designed around the assumption that the user is unable to use the visual modality, and thus, all stimuli presented to the user (including instructions, cues, and feedback) are auditory or tactile.

Use of Curricular and Extracurricular Assessments to Predict Performance on the United States Medical Licensing Examination (USMLE) Step 1: A Multi-Year Study

ERIC Educational Resources Information Center

Gandy, Robyn A.; Herial, Nabeel A.; Khuder, Sadik A.; Metting, Patricia J.

2008-01-01

This paper studies student performance predictions based on the United States Medical Licensure Exam (USMLE) Step 1. Subjects were second-year medical students from academic years of 2002 through 2006 (n = 711). Three measures of basic science knowledge (two curricular and one extracurricular) were evaluated as predictors of USMLE Step 1 scores.…

STEPPED GEAR SYNCHRONIZERS,

DTIC Science & Technology

The book concerns Soviet and foreign experience in the design and use of synchronizers in the step gear boxes of transport vehicles. Side by side...with description of the basic steps in the development of the gear engagement mechanisms and of the design used in synchronizers of domestic and foreign...manufacture, in this work much attention is devoted to the theory of gear engagement in gear boxes equipped with synchronizers , and to figuring out

Teaching population health as a basic science at Harvard Medical School.

PubMed

Finkelstein, Jonathan A; McMahon, Graham T; Peters, Antoinette; Cadigan, Rebecca; Biddinger, Paul; Simon, Steven R

2008-04-01

In 2006-2007, Harvard Medical School implemented a new, required course for first-year medical and dental students entitled Clinical Epidemiology and Population Health. Conceived of as a "basic science" course, its primary goal is to allow students to develop an understanding of caring for individuals and promoting the health of populations as a continuum of strategies, all requiring the engagement of physicians. In the course's first iteration, topical content accessible to first-year students was selected to exemplify physicians' roles in addressing current threats to population health. Methodological areas included domains of clinical epidemiology, decision sciences, population-level prevention and health promotion, physicians' roles in the public health system, and population-level surveillance and intervention strategies. Large-group settings were selectively used to frame the relevance of each topic, and conceptual learning of statistical and epidemiologic methods occurred in conference groups of 24 students. Finally, tutorials of eight students and one or two faculty were used for critical reading of published studies, review of problem sets, and group discussion of population health issues. To help students appreciate the structure and function of the public health system and physicians' role in public health emergencies, the course included a role-playing exercise simulating response to an influenza pandemic. The first iteration of the course was well received, and assessment of students suggested mastery of basic skills. Preclinical courses represent a progressive step in developing a workforce of physicians who embrace their responsibility to improve the health of the population as a whole, as well as the health of the patient in front of them.

A Two-Step Approach to Analyze Satisfaction Data

ERIC Educational Resources Information Center

Ferrari, Pier Alda; Pagani, Laura; Fiorio, Carlo V.

2011-01-01

In this paper a two-step procedure based on Nonlinear Principal Component Analysis (NLPCA) and Multilevel models (MLM) for the analysis of satisfaction data is proposed. The basic hypothesis is that observed ordinal variables describe different aspects of a latent continuous variable, which depends on covariates connected with individual and…

Programming--Translating Assessment into Action.

ERIC Educational Resources Information Center

Pyfer, Jean L.

Four steps should be taken in developing correct physical education programs for handicapped students. Assessment of student need is the first step, and a growing number of assessment instruments are available which provide information on basic locomotor skills and patterns and on physical and motor fitness. They are comprised of items that sample…

A facile synthesis of the basic steroidal skeleton using a Pauson-Khand reaction as a key step.

PubMed

Kim, Do Han; Kim, Kwang; Chung, Young Keun

2006-10-13

A high-yield synthesis of steroid-type molecules under mild reaction conditions is achieved in two steps involving nucleophilic addition of alkynyl cerium reagent to an easily enolizable carbonyl compound (beta-tetralone) followed by an intramolecular Pauson-Khand reaction.

Program Evaluation: Roles and Responsibilities of Boards of Education Relative to Thorough and Efficient Legislation.

ERIC Educational Resources Information Center

Research for Better Schools, Inc., Philadelphia, PA.

The process for providing a "thorough and efficient" (T & E) education according to New Jersey statutes and regulations involves six basic steps. This document suggests procedures for handling the fifth step, educational program evaluation. Processes discussed include committee formation, evaluation planning, action plan…

An Analysis of Instruction-Cached SIMD Computer Architecture

DTIC Science & Technology

1993-12-01

ASSEBLE SIMULATE SCHEDULE VERIFY :t og ... . .. ... V~JSRUCTONSFOR PECIIEDCOMPARE ASSEMBLEI SIMULATE Ift*U1II ~ ~ SCHEDULEIinw ;. & VERIFY...Cache to Place Blocks ................. 70 4.5.4 Step 4: Schedule Cache Blocks ............................. 70 4.5.5 Step 5: Store Cache Blocks...167 B.4 Scheduler .............................................. 167 B.4.1 Basic Block Definition

Analyzing Public Sector Education Facilities: A Step Further towards Accessible Basic Education Institutions in Destitute Subregions

ERIC Educational Resources Information Center

Talpur, Mir Aftab Hussain; Napiah, Madzlan; Chandio, Imtiaz Ahmed; Memon, Irfan Ahmed

2014-01-01

Rural subregions of the developing countries are suffering from many physical and socioeconomic problems, including scarcity of basic education institutions. The shortage of education institutions extended distance between rural localities and education institutions. Hence, to curb this problem, this research is aimed to deal with the basic…

Imaging through Fog Using Polarization Imaging in the Visible/NIR/SWIR Spectrum

DTIC Science & Technology

2017-01-11

few haze effects as possible.  One post processing step on the image in order to complete image dehazing Figure 6: Basic architecture of the...Page 16 Figure 7: Basic architecture of post-processing techniques to recover an image dehazed from a raw image This first study was limited on the

VAKT for Basic Subtraction Facts.

ERIC Educational Resources Information Center

Thornton, Carol A.; Toohey, Margaret A.

Guidelines are presented for modifying basic instruction of subtraction facts for elementary level learning disabled students. A detailed case study is used to illustrate a five-step structured program: (1) find a way to work it out; (2) add to check; (3) learn the partner facts; (4) study families of facts; (5) review and practice. The selection…

Dynamic Modeling of the Main Blow in Basic Oxygen Steelmaking Using Measured Step Responses

NASA Astrophysics Data System (ADS)

Kattenbelt, Carolien; Roffel, B.

2008-10-01

In the control and optimization of basic oxygen steelmaking, it is important to have an understanding of the influence of control variables on the process. However, important process variables such as the composition of the steel and slag cannot be measured continuously. The decarburization rate and the accumulation rate of oxygen, which can be derived from the generally measured waste gas flow and composition, are an indication of changes in steel and slag composition. The influence of the control variables on the decarburization rate and the accumulation rate of oxygen can best be determined in the main blow period. In this article, the measured step responses of the decarburization rate and the accumulation rate of oxygen to step changes in the oxygen blowing rate, lance height, and the addition rate of iron ore during the main blow are presented. These measured step responses are subsequently used to develop a dynamic model for the main blow. The model consists of an iron oxide and a carbon balance and an additional equation describing the influence of the lance height and the oxygen blowing rate on the decarburization rate. With this simple dynamic model, the measured step responses can be explained satisfactorily.

48 CFR 801.602-71 - Basic review requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Basic review requirements... GENERAL DEPARTMENT OF VETERANS AFFAIRS ACQUISITION REGULATION SYSTEM Career Development, Contracting Authority, and Responsibilities 801.602-71 Basic review requirements. Contracting officers must obtain...

Water Infrastructure Needs and Investment: Review and Analysis of Key Issues

DTIC Science & Technology

2008-11-24

the Rural Development Act of 1972, as amended (7 U.S.C. § 1926). The purpose of these USDA programs is to provide basic amenities, alleviate health...nonregulatory costs (e.g., routine replacement of basic infrastructure).12 Wastewater Needs. The most recent wastewater survey, conducted in 2004 and issued...1.6 billion just to implement the most basic steps needed to improve security (such as better controlling access to facilities with fences, locks

A cascade reaction network mimicking the basic functional steps of adaptive immune response

NASA Astrophysics Data System (ADS)

Han, Da; Wu, Cuichen; You, Mingxu; Zhang, Tao; Wan, Shuo; Chen, Tao; Qiu, Liping; Zheng, Zheng; Liang, Hao; Tan, Weihong

2015-10-01

Biological systems use complex ‘information-processing cores’ composed of molecular networks to coordinate their external environment and internal states. An example of this is the acquired, or adaptive, immune system (AIS), which is composed of both humoral and cell-mediated components. Here we report the step-by-step construction of a prototype mimic of the AIS that we call an adaptive immune response simulator (AIRS). DNA and enzymes are used as simple artificial analogues of the components of the AIS to create a system that responds to specific molecular stimuli in vitro. We show that this network of reactions can function in a manner that is superficially similar to the most basic responses of the vertebrate AIS, including reaction sequences that mimic both humoral and cellular responses. As such, AIRS provides guidelines for the design and engineering of artificial reaction networks and molecular devices.

Image feature detection and extraction techniques performance evaluation for development of panorama under different light conditions

NASA Astrophysics Data System (ADS)

Patil, Venkat P.; Gohatre, Umakant B.

2018-04-01

The technique of obtaining a wider field-of-view of an image to get high resolution integrated image is normally required for development of panorama of a photographic images or scene from a sequence of part of multiple views. There are various image stitching methods developed recently. For image stitching five basic steps are adopted stitching which are Feature detection and extraction, Image registration, computing homography, image warping and Blending. This paper provides review of some of the existing available image feature detection and extraction techniques and image stitching algorithms by categorizing them into several methods. For each category, the basic concepts are first described and later on the necessary modifications made to the fundamental concepts by different researchers are elaborated. This paper also highlights about the some of the fundamental techniques for the process of photographic image feature detection and extraction methods under various illumination conditions. The Importance of Image stitching is applicable in the various fields such as medical imaging, astrophotography and computer vision. For comparing performance evaluation of the techniques used for image features detection three methods are considered i.e. ORB, SURF, HESSIAN and time required for input images feature detection is measured. Results obtained finally concludes that for daylight condition, ORB algorithm found better due to the fact that less tome is required for more features extracted where as for images under night light condition it shows that SURF detector performs better than ORB/HESSIAN detectors.

Educational Video Recording and Editing for The Hand Surgeon

PubMed Central

Rehim, Shady A.; Chung, Kevin C.

2016-01-01

Digital video recordings are increasingly used across various medical and surgical disciplines including hand surgery for documentation of patient care, resident education, scientific presentations and publications. In recent years, the introduction of sophisticated computer hardware and software technology has simplified the process of digital video production and improved means of disseminating large digital data files. However, the creation of high quality surgical video footage requires basic understanding of key technical considerations, together with creativity and sound aesthetic judgment of the videographer. In this article we outline the practical steps involved with equipment preparation, video recording, editing and archiving as well as guidance for the choice of suitable hardware and software equipment. PMID:25911212

Constraints on Fluctuations in Sparsely Characterized Biological Systems.

PubMed

Hilfinger, Andreas; Norman, Thomas M; Vinnicombe, Glenn; Paulsson, Johan

2016-02-05

Biochemical processes are inherently stochastic, creating molecular fluctuations in otherwise identical cells. Such "noise" is widespread but has proven difficult to analyze because most systems are sparsely characterized at the single cell level and because nonlinear stochastic models are analytically intractable. Here, we exactly relate average abundances, lifetimes, step sizes, and covariances for any pair of components in complex stochastic reaction systems even when the dynamics of other components are left unspecified. Using basic mathematical inequalities, we then establish bounds for whole classes of systems. These bounds highlight fundamental trade-offs that show how efficient assembly processes must invariably exhibit large fluctuations in subunit levels and how eliminating fluctuations in one cellular component requires creating heterogeneity in another.

Constraints on Fluctuations in Sparsely Characterized Biological Systems

NASA Astrophysics Data System (ADS)

Hilfinger, Andreas; Norman, Thomas M.; Vinnicombe, Glenn; Paulsson, Johan

2016-02-01

Biochemical processes are inherently stochastic, creating molecular fluctuations in otherwise identical cells. Such "noise" is widespread but has proven difficult to analyze because most systems are sparsely characterized at the single cell level and because nonlinear stochastic models are analytically intractable. Here, we exactly relate average abundances, lifetimes, step sizes, and covariances for any pair of components in complex stochastic reaction systems even when the dynamics of other components are left unspecified. Using basic mathematical inequalities, we then establish bounds for whole classes of systems. These bounds highlight fundamental trade-offs that show how efficient assembly processes must invariably exhibit large fluctuations in subunit levels and how eliminating fluctuations in one cellular component requires creating heterogeneity in another.

Multigrid schemes for viscous hypersonic flows

NASA Technical Reports Server (NTRS)

Swanson, R. C.; Radespiel, R.

1993-01-01

Several multigrid schemes are considered for the numerical computation of viscous hypersonic flows. For each scheme, the basic solution algorithm employs upwind spatial discretization with explicit multistage time stepping. Two-level versions of the various multigrid algorithms are applied to the two-dimensional advection equation, and Fourier analysis is used to determine their damping properties. The capabilities of the multigrid methods are assessed by solving two different hypersonic flow problems. Some new multigrid schemes, based on semicoarsening strategies, are shown to be quite effective in relieving the stiffness caused by the high-aspect-ratio cells required to resolve high Reynolds number flows. These schemes exhibit good convergence rates for Reynolds numbers up to 200 x 10(exp 6).

24 CFR 599.203 - Basic application submission requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Basic application submission... Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF... Renewal Communities § 599.203 Basic application submission requirements. The basic application submission...

Physiology undergraduate degree requirements in the U.S.

PubMed

VanRyn, Valerie S; Poteracki, James M; Wehrwein, Erica A

2017-12-01

Course-level learning objectives and core concepts for undergraduate physiology teaching exist. The next step is to consider how these resources fit into generalizable program-level guidelines for Bachelor of Science (BS) degrees in Physiology. In the absence of program-level guidelines for Physiology degree programs, we compiled a selective internal report to review degree requirements from 18 peer BS programs entitled "Physiology" in the United States (U.S.). There was a range of zero to three required semesters of math, physics, physics laboratory, general biology, biology laboratory, general chemistry, chemistry laboratory, organic chemistry, organic chemistry laboratory, biochemistry, biochemistry laboratory, anatomy, anatomy laboratory, core systems physiology, and physiology laboratory. Required upper division credits ranged from 11 to 31 and included system-specific, exercise and environmental, clinically relevant, pathology/disease-related, and basic science options. We hope that this information will be useful for all programs that consider themselves to be physiology, regardless of name. Reports such as this can serve as a starting point for collaboration among BS programs to improve physiology undergraduate education and best serve our students. Copyright © 2017 the American Physiological Society.

Possible mechanism for the onset of step-bunching instabilities during the epitaxy of single-species crystalline films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cermelli, Paolo; Jabbour, Michel E.; Department of Mathematics, University of Kentucky, Lexington, Kentucky 40506-0027

A thermodynamically consistent continuum theory for single-species, step-flow epitaxy that extends the classical Burton-Cabrera-Frank (BCF) framework is derived from basic considerations. In particular, an expression for the step chemical potential is obtained that contains two energetic contributions--one from the adjacent terraces in the form of the jump in the adatom grand canonical potential and the other from the monolayer of crystallized adatoms that underlies the upper terrace in the form of the nominal bulk chemical potential--thus generalizing the classical Gibbs-Thomson relation to the dynamic, dissipative setting of step-flow growth. The linear stability analysis of the resulting quasistatic free-boundary problem formore » an infinite train of equidistant rectilinear steps yields explicit--i.e., analytical--criteria for the onset of step bunching in terms of the basic physical and geometric parameters of the theory. It is found that, in contrast with the predictions of the classical BCF model, both in the absence as well as in the presence of desorption, a growth regime exists for which step bunching occurs, except possibly in the dilute limit where the train is always stable to step bunching. In the present framework, the onset of one-dimensional instabilities is directly attributed to the energetic influence on the migrating steps of the adjacent terraces. Hence the theory provides a ''minimalist'' alternative to existing theories of step bunching and should be relevant to, e.g., molecular beam epitaxy of GaAs where the equilibrium adatom density is shown by Tersoff, Johnson, and Orr [Phys. Rev. B 78, 282 (1997)] to be extremely high.« less

Simulated Exercise Physiology Laboratories.

ERIC Educational Resources Information Center

Morrow, James R., Jr.; Pivarnik, James M.

This book consists of a lab manual and computer disks for either Apple or IBM hardware. The lab manual serves as "tour guide" for the learner going through the various lab experiences. The manual contains definitions, proper terminology, and other basic information about physiological principles. It is organized so a step-by-step procedure may be…

Bibliographic Instruction in a Step-by-Step Approach.

ERIC Educational Resources Information Center

Soash, Richard L.

1992-01-01

Describes an information search process based on Kuhlthau's model that was used to teach bibliographic research to ninth grade students. A research test to ensure that students are familiar with basic library skills is presented, forms for helping students narrow the topic and evaluate materials are provided, and a research process checklist is…

Reading Assessment: A Primer for Teachers and Tutors.

ERIC Educational Resources Information Center

Caldwell, JoAnne Schudt

This primer provides the basic information that teachers and tutors need to get started on the complex process of reading assessment. Designed for maximum utility in today's standards-driven classroom, the primer presents simple, practical assessment strategies that are based on theory and research. It takes teachers step by step through learning…

Procedures for Conducting Installation Compatible Use Zone (ICUZ) studies

DTIC Science & Technology

1988-08-01

Yes ( Penguin Books, New York, 1986). This book is a national bestseller on negotiation. It provides a concise, step-by-step, proven strategy for...AL ftA TE trate your proposal: Basic Principles of this CP TECHNIQUE - You may be able to transport some of the It’s not infrequent that public

Widening Horizons: A Guide to Organizing Field Trips for Adult Students. Final Report.

ERIC Educational Resources Information Center

Lutheran Social Mission Society, Philadelphia, PA. Lutheran Settlement House.

Based on a successful program for women conducted by Lutheran Settlement House in Philadelphia, this guide outlines step-by-step procedures for conducting educational field trips for students in adult basic education programs. The guide offers suggestions for identification of cultural, historical, and social resources that would provide valuable…

A Teacher's Project Guide to the Internet.

ERIC Educational Resources Information Center

Crotchett, Kevin R.

This book is a step-by-step guide to the Internet, suggesting creative K-12 classroom projects ranging from one of the most basic Internet functions, e-mail, to one of the more difficult, writing World Wide Web homepages. Intervening chapters describe projects using Usenet Newsgroups, File Transfer Protocols (FTP), Gopher, Veronica, the World Wide…

Seven Basic Steps to Solving Ethical Dilemmas in Special Education: A Decision-Making Framework

ERIC Educational Resources Information Center

Stockall, Nancy; Dennis, Lindsay R.

2015-01-01

This article presents a seven-step framework for decision making to solve ethical issues in special education. The authors developed the framework from the existing literature and theoretical frameworks of justice, critique, care, and professionalism. The authors briefly discuss each theoretical framework and then describe the decision-making…

A Curriculum Package for Implementing Instruction in Electricity Fundamentals/House Wiring.

ERIC Educational Resources Information Center

Murphy, Brian P.

This curriculum guide is designed for instructors of secondary industrial arts, vocational, and apprenticeship programs. The material is presented in two sections. Section I provides step-by-step instructions on how to present basic electrical circuit concepts with the use of a simply-made breadboard. Included in this section is the following…

An Analysis of the Carpentry Occupation.

ERIC Educational Resources Information Center

McKinney, Oral O.; And Others

The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the carpentry occupation. The analysis starts with the progress of a house from the first study of the blueprints to the laying out of the excavations and continuing step-by-step until the interior finish…

Carnivalesque Enactment at the Children's Medical Centre of Rabin Hospital.

ERIC Educational Resources Information Center

Lev-Aladgem, Shulamith

2000-01-01

Describes the basic characteristics of the "carnivalesque enactment" and its therapeutic potential. Explains a case study of the drama project at the Rabin Children's Medical Centre, how the carnivalesque enactment was developed step by step, and the kind of effect it stimulated among the children. Suggests new theatrical experiments with…

Cost Accounting and Accountability: One Approach.

ERIC Educational Resources Information Center

Gingold, William

This paper outlines an approach designed to provide an accurate and efficient cost accounting system for use in schools and other social service organizations. In his discussion, the author presents a detailed step-by-step description of how to establish, plan, and operate the system. The basic element of the system is the Daily Event Record…

Food on Campus: A Recipe for Action.

ERIC Educational Resources Information Center

Kinsella, Susan

Really good food can be served in any school, and this step-by-step guide contains the basics of understanding and reforming food service: detailed explanations of how food services are run; guidelines for rating the food service; the wholesome, good-tasting foods students really like to eat yet are affordable and manageable. Included are plans…

ATMS Step By Step.

ERIC Educational Resources Information Center

National Library of Australia, Canberra.

This manual is designed to provide an introduction and basic guide to the use of IBM's Advanced Text Management System (ATMS), the text processing system to be used for the creation of Australian data bases within AUSINET. Instructions are provided for using the system to enter, store, retrieve, and modify data, which may then be displayed at the…

Conceptual analysis of Physiology of vision in Ayurveda

PubMed Central

Balakrishnan, Praveen; Ashwini, M. J.

2014-01-01

The process by which the world outside is seen is termed as visual process or physiology of vision. There are three phases in this visual process: phase of refraction of light, phase of conversion of light energy into electrical impulse and finally peripheral and central neurophysiology. With the advent of modern instruments step by step biochemical changes occurring at each level of the visual process has been deciphered. Many investigations have emerged to track these changes and helping to diagnose the exact nature of the disease. Ayurveda has described this physiology of vision based on the functions of vata and pitta. Philosophical textbook of ayurveda, Tarka Sangraha, gives certain basics facts of visual process. This article discusses the second and third phase of visual process. Step by step analysis of the visual process through the spectacles of ayurveda amalgamated with the basics of philosophy from Tarka Sangraha has been analyzed critically to generate a concrete idea regarding the physiology and hence thereby interpret the pathology on the grounds of ayurveda based on the investigative reports. PMID:25336853

45 CFR 263.8 - What happens if a State fails to meet the basic MOE requirement?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false What happens if a State fails to meet the basic... Maintenance of Effort? § 263.8 What happens if a State fails to meet the basic MOE requirement? (a) If any State fails to meet its basic MOE requirement for any fiscal year, then we will reduce dollar-for-dollar...

Back to Basics: Preventing Surgical Fires.

PubMed

Spruce, Lisa

2016-09-01

When fires occur in the OR, they are devastating and potentially fatal to both patients and health care workers. Fires can be prevented by understanding the fire triangle and methods of reducing fire risk, conducting fire risk assessments, and knowing how to respond if a fire occurs. This Back to Basics article addresses the basics of fire prevention and the steps that can be taken to prevent fires from occurring. Copyright © 2016 AORN, Inc. Published by Elsevier Inc. All rights reserved.

[The emphases and basic procedures of genetic counseling in psychotherapeutic model].

PubMed

Zhang, Yuan-Zhi; Zhong, Nanbert

2006-11-01

The emphases and basic procedures of genetic counseling are all different with those in old models. In the psychotherapeutic model, genetic counseling will not only focus on counselees' genetic disorders and birth defects, but also their psychological problems. "Client-centered therapy" termed by Carl Rogers plays an important role in genetic counseling process. The basic procedures of psychotherapeutic model of genetic counseling include 7 steps: initial contact, introduction, agendas, inquiry of family history, presenting information, closing the session and follow-up.

5 CFR 300.103 - Basic requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Basic requirements. 300.103 Section 300.103 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS EMPLOYMENT (GENERAL) Employment Practices § 300.103 Basic requirements. (a) Job analysis. Each employment practice of the Federal Government generally, and of...

Elementary Accounting. A Programed Text. Revised. Edition Code-3.

ERIC Educational Resources Information Center

Army Finance School, Fort Benjamin Harrison, IN.

This programed text is designed to teach the basic elements of the double entry system of accounting, including basic terms, procedures, definitions, and principles used. The text consists of frames, which are sequenced instructional steps and, in most cases, are composed of two parts. The first part states a fact or relates information and asks a…

Structured Hypermedia Application Development Model (SHADM): A structured Model for Technical Documentation Application Design

DTIC Science & Technology

1991-12-01

effective (19:15) Figure 2 details a flowchart of the basic steps in prototyping. The basic concept behind prototyping is to quickly produce a working...One approach to overcoming this is to structure the document relative to the experience level of the user (14:49). A "novice" or beginner would

A Copper-Sulfate-Based Inorganic Chemistry Laboratory for First-Year University Students That Teaches Basic Operations and Concepts.

ERIC Educational Resources Information Center

Rodriguez, Emilio; Vicente, Miguel Angel

2002-01-01

Presents a 10-hour chemistry experiment using copper sulfate that has three steps: (1) purification of an ore containing copper sulfate and insoluble basic copper sulfates; (2) determination of the number of water molecules in hydrated copper sulfate; and (3) recovery of metallic copper from copper sulfate. (Author/YDS)

The Development of a Comprehensive Student Basic Skills Assessment Program at St. Louis Community College's Florissant Valley Campus.

ERIC Educational Resources Information Center

Webb, Mel

A comprehensive student basic skills assessment program was developed at St. Louis Community College (SLCC) at Florissant Valley to appraise student readiness to take courses, gather information for counseling and advising, diagnose student problems, and evaluate program efficiency and effectiveness. The steps taken in developing the program were:…

Formative Evaluation of an Experimental BE/E [Basic Electricity and Electronics] Program. Report No. 9-75.

ERIC Educational Resources Information Center

Fishburne, R. P., Jr.; Mims, Diane M.

An experimental Basic Electricity and Electronics course (BE/E) utilizing a lock-step, instructor presentation methodology was developed and evaluated at the Service School Command, Great Lakes. The study, directed toward the training of lower mental group, school nonqualified personnel, investigated comparative data on test performance, attitude,…

Age, Sex, and Body Composition as Predictors of Children's Performance on Basic Motor Abilities and Health-Related Fitness Items.

ERIC Educational Resources Information Center

Pissanos, Becky W.; And Others

1983-01-01

Step-wise linear regressions were used to relate children's age, sex, and body composition to performance on basic motor abilities including balance, speed, agility, power, coordination, and reaction time, and to health-related fitness items including flexibility, muscle strength and endurance and cardiovascular functions. Eighty subjects were in…

Proton Mediated Chemistry and Catalysis in a Self-Assembled Supramolecular Host

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pluth, Michael; Bergman, Robert; Raymond, Kenneth

2009-04-10

Synthetic supramolecular host assemblies can impart unique reactivity to encapsulated guest molecules. Synthetic host molecules have been developed to carry out complex reactions within their cavities, despite the fact that they lack the type of specifically tailored functional groups normally located in the analogous active sites of enzymes. Over the past decade, the Raymond group has developed a series of self-assembled supramolecules and the Bergman group has developed and studied a number of catalytic transformations. In this Account, we detail recent collaborative work between these two groups, focusing on chemical catalysis stemming from the encapsulation of protonated guests and expandingmore » to acid catalysis in basic solution. We initially investigated the ability of a water-soluble, self-assembled supramolecular host molecule to encapsulate protonated guests in its hydrophobic core. Our study of encapsulated protonated amines revealed rich host-guest chemistry. We established that self-exchange (that is, in-out guest movement) rates of protonated amines were dependent on the steric bulk of the amine rather than its basicity. The host molecule has purely rotational tetrahedral (T) symmetry, so guests with geminal N-methyl groups (and their attendant mirror plane) were effectively desymmetrized; this allowed for the observation and quantification of the barriers for nitrogen inversion followed by bond rotation. Furthermore, small nitrogen heterocycles, such as N-alkylaziridines, N-alkylazetidines, and N-alkylpyrrolidines, were found to be encapsulated as proton-bound homodimers or homotrimers. We further investigated the thermodynamic stabilization of protonated amines, showing that encapsulation makes the amines more basic in the cavity. Encapsulation raises the effective basicity of protonated amines by up to 4.5 pK{sub a} units, a difference almost as large as that between the moderate and strong bases carbonate and hydroxide. The thermodynamic stabilization of protonated guests was translated into chemical catalysis by taking advantage of the potential for accelerating reactions that take place via positively charged transition states, which could be potentially stabilized by encapsulation. Orthoformates, generally stable in neutral or basic solution, were found to be suitable substrates for catalytic hydrolysis by the assembly. Orthoformates small enough to undergo encapsulation were readily hydrolyzed by the assembly in basic solution, with rate acceleration factors up to 3900 compared with those of the corresponding uncatalyzed reactions. Furthering the analogy to enzymes that obey Michaelis-Menten kinetics, we observed competitive inhibition with the inhibitor NPr{sub 4}{sup +}, thereby confirming that the interior cavity of the assembly was the active site for catalysis. Mechanistic studies revealed that the assembly is required for catalysis and that the rate-limiting step of the reaction involves proton transfer from hydronium to the encapsulated substrate. Encapsulation in the assembly changes the orthoformate hydrolysis from an A-1 mechanism (in which decomposition of the protonated substrate is the rate-limiting step) to an A-S{sub E}2 mechanism (in which proton transfer is the rate-limiting step). The study of hydrolysis in the assembly was next extended to acetals, which were also catalytically hydrolyzed by the assembly in basic solution. Acetal hydrolysis changed from the A-1 mechanism in solution to an A-2 mechanism inside the assembly, where attack of water on the protonated substrate is rate limiting. This work provides rare examples of assembly-catalyzed reactions that proceed with substantial rate accelerations despite the absence of functional groups in the cavity and with mechanisms fully elucidated by quantitative kinetic studies.« less

Preparation and characterization of silica xerogels as carriers for drugs.

PubMed

Czarnobaj, K

2008-11-01

The aim of the present study was to utilize the sol-gel method to synthesize different forms of xerogel matrices for drugs and to investigate how the synthesis conditions and solubility of drugs influence the change of the profile of drug release and the structure of the matrices. Silica xerogels doped with drugs were prepared by the sol-gel method from a hydrolyzed tetraethoxysilane (TEOS) solution containing two model compounds: diclofenac diethylamine, (DD)--a water-soluble drug or ibuprofen, (IB)--a water insoluble drug. Two procedures were used for the synthesis of sol-gel derived materials: one-step procedure (the sol-gel reaction was carried out under acidic or basic conditions) and the two-step procedure (first, hydrolysis of TEOS was carried out under acidic conditions, and then condensation of silanol groups was carried out under basic conditions) in order to obtain samples with altered microstructures. In vitro release studies of drugs revealed a similar release profile in two steps: an initial diffusion-controlled release followed by a slower release rate. In all the cases studied, the released amount of DD was higher and the released time was shorter compared with IB for the same type of matrices. The released amount of drugs from two-step prepared xerogels was always lower than that from one-step base-catalyzed xerogels. One-step acid-catalyzed xerogels proved unsuitable as the carriers for the examined drugs.

19 CFR 111.11 - Basic requirements for a license.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Basic requirements for a license. 111.11 Section 111.11 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Procedure To Obtain License or Permit § 111.11 Basic requirements for...

19 CFR 111.11 - Basic requirements for a license.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Basic requirements for a license. 111.11 Section 111.11 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Procedure To Obtain License or Permit § 111.11 Basic requirements for...

19 CFR 111.11 - Basic requirements for a license.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Basic requirements for a license. 111.11 Section 111.11 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Procedure To Obtain License or Permit § 111.11 Basic requirements for...

19 CFR 111.11 - Basic requirements for a license.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Basic requirements for a license. 111.11 Section 111.11 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Procedure To Obtain License or Permit § 111.11 Basic requirements for...

19 CFR 111.11 - Basic requirements for a license.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Basic requirements for a license. 111.11 Section 111.11 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Procedure To Obtain License or Permit § 111.11 Basic requirements for...

SU-E-J-16: Automatic Image Contrast Enhancement Based On Automatic Parameter Optimization for Radiation Therapy Setup Verification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qiu, J; Washington University in St Louis, St Louis, MO; Li, H. Harlod

Purpose: In RT patient setup 2D images, tissues often cannot be seen well due to the lack of image contrast. Contrast enhancement features provided by image reviewing software, e.g. Mosaiq and ARIA, require manual selection of the image processing filters and parameters thus inefficient and cannot be automated. In this work, we developed a novel method to automatically enhance the 2D RT image contrast to allow automatic verification of patient daily setups as a prerequisite step of automatic patient safety assurance. Methods: The new method is based on contrast limited adaptive histogram equalization (CLAHE) and high-pass filtering algorithms. The mostmore » important innovation is to automatically select the optimal parameters by optimizing the image contrast. The image processing procedure includes the following steps: 1) background and noise removal, 2) hi-pass filtering by subtracting the Gaussian smoothed Result, and 3) histogram equalization using CLAHE algorithm. Three parameters were determined through an iterative optimization which was based on the interior-point constrained optimization algorithm: the Gaussian smoothing weighting factor, the CLAHE algorithm block size and clip limiting parameters. The goal of the optimization is to maximize the entropy of the processed Result. Results: A total 42 RT images were processed. The results were visually evaluated by RT physicians and physicists. About 48% of the images processed by the new method were ranked as excellent. In comparison, only 29% and 18% of the images processed by the basic CLAHE algorithm and by the basic window level adjustment process, were ranked as excellent. Conclusion: This new image contrast enhancement method is robust and automatic, and is able to significantly outperform the basic CLAHE algorithm and the manual window-level adjustment process that are currently used in clinical 2D image review software tools.« less

Elements of a Science of Education

ERIC Educational Resources Information Center

Kalantzis, Mary

2006-01-01

Education has become a domain of considerable ideological division. Today the mantra is freedom and choice, yet at the same time, a push to "back to basics" is observed. This author attempts to trace the contours of this division by taking two steps back from the contemporary fray. One step is to situate present day discussions in a larger…

Emotional Lessons: Out on the Tundra, Kids Learn To Better Understand Their Own and Others' Feelings.

ERIC Educational Resources Information Center

Sherman, Lee

1999-01-01

A nationally acclaimed antiviolence program, Second Step teaches three basic skills needed for living peacefully in society: empathy, impulse control, and anger management. In Bethel (Alaska), where student gunfire killed a student and principal in 1997, Second Step is used enthusiastically, having been modified to fit Yupik Eskimo culture and…

Designing and Implementing Two-Way Bilingual Programs: A Step-by-Step Guide for Administrators, Teachers, and Parents.

ERIC Educational Resources Information Center

Calderon, Margarita Espino; Minaya-Rowe, Liliana

This book provides school administrators, teachers, and parents with the basic knowledge necessary for planning and implementing effective two-way bilingual programs. It offers essential elements to help students gain literacy in two languages, increase cross-cultural understanding, and meet high levels of achievement in all core academic areas.…

Measure Guideline. Replacing Single-Speed Pool Pumps with Variable Speed Pumps for Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunt, A.; Easley, S.

2012-05-01

This measure guideline evaluates potential energy savings by replacing traditional single-speed pool pumps with variable speed pool pumps, and provides a basic cost comparison between continued uses of traditional pumps verses new pumps. A simple step-by-step process for inspecting the pool area and installing a new pool pump follows.

Measure Guideline: Replacing Single-Speed Pool Pumps with Variable Speed Pumps for Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunt, A.; Easley, S.

2012-05-01

The report evaluates potential energy savings by replacing traditional single-speed pool pumps with variable speed pool pumps, and provide a basic cost comparison between continued uses of traditional pumps verses new pumps. A simple step-by-step process for inspecting the pool area and installing a new pool pump follows.

Team Nutrition's Teacher Handbook: Tips, Tools, and Jewels for Busy Educators.

ERIC Educational Resources Information Center

Shepherd, Sandra K.; Whitehead, Constance S.

This teacher support manual helps elementary educators teach proper nutrition to students in pre-K through grade 5. It provides a summary of all the background and tools teachers will need to do what they want with the Team Nutrition/Scholastic curricula. There is brief background information on nutrition basics; step-by-step instructions for…

Better Speeches in Ten Simple Steps. Revised 2nd Edition.

ERIC Educational Resources Information Center

Robinson, James W.

Acknowledging that the fear of public speaking is widespread, this book guides the reader/communicator through 10 steps of writing and presenting a speech. The book is based on the idea that solid preparation and following a few basic rules makes public speaking easier and the finished product more dynamic. The book is divided into the following…

An empirical investigation of sparse distributed memory using discrete speech recognition

NASA Technical Reports Server (NTRS)

Danforth, Douglas G.

1990-01-01

Presented here is a step by step analysis of how the basic Sparse Distributed Memory (SDM) model can be modified to enhance its generalization capabilities for classification tasks. Data is taken from speech generated by a single talker. Experiments are used to investigate the theory of associative memories and the question of generalization from specific instances.

Communication for the Workplace: An Integrated Language Approach. Second Edition. Job Skills. Net Effect Series.

ERIC Educational Resources Information Center

Ettinger, Blanche; Perfetto, Edda

Using a developmental, hands-on approach, this text/workbook helps students master the basic English skills that are essential to write effective business correspondence, to recognize language errors, and to develop decision-making and problem-solving skills. Its step-by-step focus and industry-specific format encourages students to review,…

Using Video Modeling via Handheld Computers to Improve Geometry Skills for High School Students with Learning Disabilities

ERIC Educational Resources Information Center

Cihak, David F.; Bowlin, Tammy

2009-01-01

The researchers examined the use of video modeling by means of a handheld computer as an alternative instructional delivery system for learning basic geometry skills. Three high school students with learning disabilities participated in this study. Through video modeling, teacher-developed video clips showing step-by-step problem solving processes…

From Informal Safety-Critical Requirements to Property-Driven Formal Validation

NASA Technical Reports Server (NTRS)

Cimatti, Alessandro; Roveri, Marco; Susi, Angelo; Tonetta, Stefano

2008-01-01

Most of the efforts in formal methods have historically been devoted to comparing a design against a set of requirements. The validation of the requirements themselves, however, has often been disregarded, and it can be considered a largely open problem, which poses several challenges. The first challenge is given by the fact that requirements are often written in natural language, and may thus contain a high degree of ambiguity. Despite the progresses in Natural Language Processing techniques, the task of understanding a set of requirements cannot be automatized, and must be carried out by domain experts, who are typically not familiar with formal languages. Furthermore, in order to retain a direct connection with the informal requirements, the formalization cannot follow standard model-based approaches. The second challenge lies in the formal validation of requirements. On one hand, it is not even clear which are the correctness criteria or the high-level properties that the requirements must fulfill. On the other hand, the expressivity of the language used in the formalization may go beyond the theoretical and/or practical capacity of state-of-the-art formal verification. In order to solve these issues, we propose a new methodology that comprises of a chain of steps, each supported by a specific tool. The main steps are the following. First, the informal requirements are split into basic fragments, which are classified into categories, and dependency and generalization relationships among them are identified. Second, the fragments are modeled using a visual language such as UML. The UML diagrams are both syntactically restricted (in order to guarantee a formal semantics), and enriched with a highly controlled natural language (to allow for modeling static and temporal constraints). Third, an automatic formal analysis phase iterates over the modeled requirements, by combining several, complementary techniques: checking consistency; verifying whether the requirements entail some desirable properties; verify whether the requirements are consistent with selected scenarios; diagnosing inconsistencies by identifying inconsistent cores; identifying vacuous requirements; constructing multiple explanations by enabling the fault-tree analysis related to particular fault models; verifying whether the specification is realizable.

The Raptor Real-Time Processing Architecture

NASA Astrophysics Data System (ADS)

Galassi, M.; Starr, D.; Wozniak, P.; Brozdin, K.

The primary goal of Raptor is ambitious: to identify interesting optical transients from very wide field of view telescopes in real time, and then to quickly point the higher resolution Raptor ``fovea'' cameras and spectrometer to the location of the optical transient. The most interesting of Raptor's many applications is the real-time search for orphan optical counterparts of Gamma Ray Bursts. The sequence of steps (data acquisition, basic calibration, source extraction, astrometry, relative photometry, the smarts of transient identification and elimination of false positives, telescope pointing feedback, etc.) is implemented with a ``component'' approach. All basic elements of the pipeline functionality have been written from scratch or adapted (as in the case of SExtractor for source extraction) to form a consistent modern API operating on memory resident images and source lists. The result is a pipeline which meets our real-time requirements and which can easily operate as a monolithic or distributed processing system. Finally, the Raptor architecture is entirely based on free software (sometimes referred to as ``open source'' software). In this paper we also discuss the interplay between various free software technologies in this type of astronomical problem.

Raptor -- Mining the Sky in Real Time

NASA Astrophysics Data System (ADS)

Galassi, M.; Borozdin, K.; Casperson, D.; McGowan, K.; Starr, D.; White, R.; Wozniak, P.; Wren, J.

2004-06-01

The primary goal of Raptor is ambitious: to identify interesting optical transients from very wide field of view telescopes in real time, and then to quickly point the higher resolution Raptor ``fovea'' cameras and spectrometer to the location of the optical transient. The most interesting of Raptor's many applications is the real-time search for orphan optical counterparts of Gamma Ray Bursts. The sequence of steps (data acquisition, basic calibration, source extraction, astrometry, relative photometry, the smarts of transient identification and elimination of false positives, telescope pointing feedback...) is implemented with a ``component'' aproach. All basic elements of the pipeline functionality have been written from scratch or adapted (as in the case of SExtractor for source extraction) to form a consistent modern API operating on memory resident images and source lists. The result is a pipeline which meets our real-time requirements and which can easily operate as a monolithic or distributed processing system. Finally: the Raptor architecture is entirely based on free software (sometimes referred to as "open source" software). In this paper we also discuss the interplay between various free software technologies in this type of astronomical problem.

VHR satellite multitemporal data to extract cultural landscape changes in the roman site of Grumentum

NASA Astrophysics Data System (ADS)

masini, nicola; Lasaponara, Rosa

2013-04-01

The papers deals with the use of VHR satellite multitemporal data set to extract cultural landscape changes in the roman site of Grumentum Grumentum is an ancient town, 50 km south of Potenza, located near the roman road of Via Herculea which connected the Venusia, in the north est of Basilicata, with Heraclea in the Ionian coast. The first settlement date back to the 6th century BC. It was resettled by the Romans in the 3rd century BC. Its urban fabric which evidences a long history from the Republican age to late Antiquity (III BC-V AD) is composed of the typical urban pattern of cardi and decumani. Its excavated ruins include a large amphitheatre, a theatre, the thermae, the Forum and some temples. There are many techniques nowadays available to capture and record differences in two or more images. In this paper we focus and apply the two main approaches which can be distinguished into : (i) unsupervised and (ii) supervised change detection methods. Unsupervised change detection methods are generally based on the transformation of the two multispectral images in to a single band or multiband image which are further analyzed to identify changes Unsupervised change detection techniques are generally based on three basic steps (i) the preprocessing step, (ii) a pixel-by-pixel comparison is performed, (iii). Identification of changes according to the magnitude an direction (positive /negative). Unsupervised change detection are generally based on the transformation of the two multispectral images into a single band or multiband image which are further analyzed to identify changes. Than the separation between changed and unchanged classes is obtained from the magnitude of the resulting spectral change vectors by means of empirical or theoretical well founded approaches Supervised change detection methods are generally based on supervised classification methods, which require the availability of a suitable training set for the learning process of the classifiers. Unsupervised change detection techniques are generally based on three basic steps (i) the preprocessing step, (ii) supervised classification is performed on the single dates or on the map obtained as the difference of two dates, (iii). Identification of changes according to the magnitude an direction (positive /negative). Supervised change detection are generally based on supervised classification methods, which require the availability of a suitable training set for the learning process of the classifiers, therefore these algorithms require a preliminary knowledge necessary: (i) to generate representative parameters for each class of interest; and (ii) to carry out the training stage Advantages and disadvantages of the supervised and unsupervised approaches are discuss. Finally results from the the satellite multitemporal dataset was also integrated with aerial photos from historical archive in order to expand the time window of the investigation and capture landscape changes occurred from the Agrarian Reform, in the 50s, up today.

The Politics of Diversifying Basic Education Delivery: A Comparative Analysis from East Africa

ERIC Educational Resources Information Center

Hoppers, Wim

2011-01-01

This article addresses the politics and policy-making of alternative forms of basic education in the context of EFA, with an emphasis on non-formal education (NFE) for school-age children. It explores how policy-makers interpret the relevance of such alternatives, the steps that are taken to implement the reforms and factors that play a role in…

X-Ray Diffraction and the Discovery of the Structure of DNA

ERIC Educational Resources Information Center

Crouse, David T.

2007-01-01

A method is described for teaching the analysis of X-ray diffraction of DNA through a series of steps utilizing the original methods used by James Watson, Francis Crick, Maurice Wilkins and Rosalind Franklin. The X-ray diffraction pattern led to the conclusion of the basic helical structure of DNA and its dimensions while basic chemical principles…

Information Fluxes as Concept for Categorizations of Life

NASA Astrophysics Data System (ADS)

Hildenbrand, Georg; Hausmann, M.

2012-05-01

Definitions of life are controversially discussed; however, they are mostly depending on bio- evolutionary driven arguments. Here, we propose a systematic, theoretical approach to the question what life is, by categorization and classification of different levels of life. This approach is mainly based on the analysis of information flux occurring in systems being suspicious to be alive, and on the analysis of their power of environmental control. In a first step, we show that all biological definitions of life can be derived from basic physical principles of entropy (number of possible states of a thermodynamic system) and of the energy needed for controlling entropic development. In a next step we discuss how any process where information flux is generated, regardless of its materialization is defined and related to classical definitions of life. In a third step we resume the proposed classification scheme in its most basic way, looking only for existence of data storage, its processing, and its environmental control. We join inhere a short discussion how the materialization of information fluxes can take place depending on the special properties of the four basic physical forces. Having done all this we are able to give everybody a classification catalogue at hand that one can categorize the kind of life one is talking about, thus overcoming the obstacles deriving from the simple appearing question whether something is alive or not. On its most basic level as presented here, our scheme offers a categorization for fire, crystals, prions, viruses, spores, up to cells and even tardigrada and cryostases.

Bidirectional reaction steps in metabolic networks: I. Modeling and simulation of carbon isotope labeling experiments.

PubMed

Wiechert, W; de Graaf, A A

1997-07-05

The extension of metabolite balancing with carbon labeling experiments, as described by Marx et al. (Biotechnol. Bioeng. 49: 11-29), results in a much more detailed stationary metabolic flux analysis. As opposed to basic metabolite flux balancing alone, this method enables both flux directions of bidirectional reaction steps to be quantitated. However, the mathematical treatment of carbon labeling systems is much more complicated, because it requires the solution of numerous balance equations that are bilinear with respect to fluxes and fractional labeling. In this study, a universal modeling framework is presented for describing the metabolite and carbon atom flux in a metabolic network. Bidirectional reaction steps are extensively treated and their impact on the system's labeling state is investigated. Various kinds of modeling assumptions, as usually made for metabolic fluxes, are expressed by linear constraint equations. A numerical algorithm for the solution of the resulting linear constrained set of nonlinear equations is developed. The numerical stability problems caused by large bidirectional fluxes are solved by a specially developed transformation method. Finally, the simulation of carbon labeling experiments is facilitated by a flexible software tool for network synthesis. An illustrative simulation study on flux identifiability from available flux and labeling measurements in the cyclic pentose phosphate pathway of a recombinant strain of Zymomonas mobilis concludes this contribution.

Nonlinear Attitude Filtering Methods

NASA Technical Reports Server (NTRS)

Markley, F. Landis; Crassidis, John L.; Cheng, Yang

2005-01-01

This paper provides a survey of modern nonlinear filtering methods for attitude estimation. Early applications relied mostly on the extended Kalman filter for attitude estimation. Since these applications, several new approaches have been developed that have proven to be superior to the extended Kalman filter. Several of these approaches maintain the basic structure of the extended Kalman filter, but employ various modifications in order to provide better convergence or improve other performance characteristics. Examples of such approaches include: filter QUEST, extended QUEST, the super-iterated extended Kalman filter, the interlaced extended Kalman filter, and the second-order Kalman filter. Filters that propagate and update a discrete set of sigma points rather than using linearized equations for the mean and covariance are also reviewed. A two-step approach is discussed with a first-step state that linearizes the measurement model and an iterative second step to recover the desired attitude states. These approaches are all based on the Gaussian assumption that the probability density function is adequately specified by its mean and covariance. Other approaches that do not require this assumption are reviewed, including particle filters and a Bayesian filter based on a non-Gaussian, finite-parameter probability density function on SO(3). Finally, the predictive filter, nonlinear observers and adaptive approaches are shown. The strengths and weaknesses of the various approaches are discussed.

Gynecologic oncology group strategies to improve timeliness of publication.

PubMed

Bialy, Sally; Blessing, John A; Stehman, Frederick B; Reardon, Anne M; Blaser, Kim M

2013-08-01

The Gynecologic Oncology Group (GOG) is a multi-institution cooperative group funded by the National Cancer Institute to conduct clinical trials encompassing clinical and basic scientific research in gynecologic malignancies. These results are disseminated via publication in peer-reviewed journals. This process requires collaboration of numerous investigators located in diverse cancer research centers. Coordination of manuscript development is positioned within the Statistical and Data Center (SDC), thus allowing the SDC personnel to manage the process and refine strategies to promote earlier dissemination of results. A major initiative to improve timeliness utilizing the assignment, monitoring, and enforcement of deadlines for each phase of manuscript development is the focus of this investigation. Document improvement in timeliness via comparison of deadline compliance and time to journal submission due to expanded administrative and technologic initiatives implemented in 2006. Major steps in the publication process include generation of first draft by the First Author and submission to SDC, Co-author review, editorial review by Publications Subcommittee, response to journal critique, and revision. Associated with each step are responsibilities of First Author to write or revise, collaborating Biostatistician to perform analysis and interpretation, and assigned SDC Clinical Trials Editorial Associate to format/revise according to journal requirements. Upon the initiation of each step, a deadline for completion is assigned. In order to improve efficiency, a publications database was developed to track potential steps in manuscript development that enables the SDC Director of Administration and the Publications Subcommittee Chair to assign, monitor, and enforce deadlines. They, in turn, report progress to Group Leadership through the Operations Committee. The success of the strategies utilized to improve the GOG publication process was assessed by comparing the timeliness of each potential step in the development of primary Phase II manuscripts during 2003-2006 versus 2007-2010. Improvement was noted in 10 of 11 identified steps resulting in a cumulative average improvement of 240 days from notification of data maturity to First Author through first submission to a journal. Moreover, the average time to journal acceptance has improved by an average of 346 days. The investigation is based on only Phase II trials to ensure comparability of manuscript complexity. Nonetheless, the procedures employed are applicable to the development of any clinical trials manuscript. The assignment, monitoring, and enforcement of deadlines for all stages of manuscript development have resulted in increased efficiency and timeliness. The positioning and support of manuscript development within the SDC provide a valuable resource to authors in meeting assigned deadlines, accomplishing peer review, and complying with journal requirements.

5 CFR 531.504 - Level of performance required for quality step increase.

Code of Federal Regulations, 2010 CFR

2010-01-01

... step increase. 531.504 Section 531.504 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY UNDER THE GENERAL SCHEDULE Quality Step Increases § 531.504 Level of performance required for quality step increase. A quality step increase shall not be required but may be granted only...

A simplified rotor system mathematical model for piloted flight dynamics simulation

NASA Technical Reports Server (NTRS)

Chen, R. T. N.

1979-01-01

The model was developed for real-time pilot-in-the-loop investigation of helicopter flying qualities. The mathematical model included the tip-path plane dynamics and several primary rotor design parameters, such as flapping hinge restraint, flapping hinge offset, blade Lock number, and pitch-flap coupling. The model was used in several exploratory studies of the flying qualities of helicopters with a variety of rotor systems. The basic assumptions used and the major steps involved in the development of the set of equations listed are described. The equations consisted of the tip-path plane dynamic equation, the equations for the main rotor forces and moments, and the equation for control phasing required to achieve decoupling in pitch and roll due to cyclic inputs.

Progress with multigrid schemes for hypersonic flow problems

NASA Technical Reports Server (NTRS)

Radespiel, R.; Swanson, R. C.

1991-01-01

Several multigrid schemes are considered for the numerical computation of viscous hypersonic flows. For each scheme, the basic solution algorithm uses upwind spatial discretization with explicit multistage time stepping. Two level versions of the various multigrid algorithms are applied to the two dimensional advection equation, and Fourier analysis is used to determine their damping properties. The capabilities of the multigrid methods are assessed by solving three different hypersonic flow problems. Some new multigrid schemes based on semicoarsening strategies are shown to be quite effective in relieving the stiffness caused by the high aspect ratio cells required to resolve high Reynolds number flows. These schemes exhibit good convergence rates for Reynolds numbers up to 200 x 10(exp 6) and Mach numbers up to 25.

Detecting Tie2, an endothelial growth factor receptor, by using immunohistochemistry in mouse lungs.

PubMed

Guha, Prajna P; David, Sascha A; Ghosh, Chandra C

2014-01-01

Immunohistochemical (IHC) staining is an invaluable, sensitive, and effective method to detect the presence and localization of proteins in the cellular compartment in tissues. The basic concept of IHC is detecting the antigen in tissues by means of specific antibody binding, which is then demonstrated with a colored histochemical reaction that can be observed under a light microscope. The most challenging aspect of IHC techniques is optimizing the precise experimental conditions that are required to get a specific and a strong signal. The critical steps of IHC are specimen acquisition, fixation, permeabilization, detection system, and selection of the antigen specific antibody and its optimization. Here, we elaborate the technique using the endothelial growth factor binding receptor Tie2 in mouse lungs.

An innovative and highly drug-tolerant approach for detecting neutralizing antibodies directed to therapeutic antibodies.

PubMed

Sloan, John H; Conway, Richard G; Pottanat, Thomas G; Troutt, Jason S; Higgs, Richard E; Konrad, Robert J; Qian, Yue-Wei

2016-10-01

Immunogenicity testing of biotherapeutic drugs is a regulatory requirement. Herein, we describe a drug-tolerant assay for detecting neutralizing antibodies against a therapeutic antibody. Excess target of the therapeutic antibody was incorporated into the detection step of an affinity capture elution assay. Signal generated from binding of antidrug antibody (ADA) to the therapeutic antibody was compared with signal from binding of ADA to the therapeutic antibody preincubated with its target. The results demonstrated that the target blocked binding of the therapeutic antibody to neutralizing monkey ADA and to two anti-idiotypic antibodies. This highly drug-tolerant novel approach enables the detection of neutralizing antibodies and allows for one basic assay format to achieve complete characterization of ADA responses.

From Catheter to Kidney Stone: The Uropathogenic Lifestyle of Proteus mirabilis

PubMed Central

Norsworthy, Allison N.; Pearson, Melanie M.

2017-01-01

Proteus mirabilis is a model organism for urease-producing uropathogens. These diverse bacteria cause infection stones in the urinary tract and form crystalline biofilms on indwelling urinary catheters, frequently leading to poly-microbial infection. Recent work has elucidated how P. mirabilis causes all of these disease states. Particularly exciting is the discovery that this bacterium forms large clusters in the bladder lumen that are sites for stone formation. These clusters, and other steps of infection, require two virulence factors in particular: urease and MR/P fimbriae. Highlighting the importance of MR/P fimbriae is the cotranscribed regulator, MrpJ, which globally controls virulence. Overall, P. mirabilis exhibits an extraordinary lifestyle, and further probing will answer exciting basic microbiological and clinically relevant questions. PMID:28017513

Influence of curriculum type on student performance in the United States Medical Licensing Examination Step 1 and Step 2 exams: problem-based learning vs. lecture-based curriculum.

PubMed

Enarson, C; Cariaga-Lo, L

2001-11-01

The results of the United States Medical Licensing Examination Step 1 and 2 examinations are reported for students enrolled in a problem-based and traditional lecture-based curricula over a seven-year period at a single institution. There were no statistically significant differences in mean scores on either examination over the seven year period as a whole. There were statistically significant main effects noted by cohort year and curricular track for both the Step 1 and 2 examinations. These results support the general, long-term effectiveness of problem-based learning with respect to basic and clinical science knowledge acquisition. This paper reports the United States Medical Licensing Examination Step 1 and Step 2 results for students enrolled in a problem-based and traditional lecture-based learning curricula over the seven-year period (1992-98) in order to evaluate the adequacy of each curriculum in supporting students learning of the basic and clinical sciences. Six hundred and eighty-nine students who took the United States Medical Licensing Examination Step 1 and 540 students who took Step 2 for the first time over the seven-year period were included in the analyses. T-test analyses were utilized to compare students' Step 1 and Step 2 performance by curriculum groups. United States Medical Licensing Examination Step 1 scores over the seven-year period were 214 for Traditional Curriculum students and 208 for Parallel Curriculum students (t-value = 1.32, P=0.21). Mean Step 2 scores over the seven-year period were 208 for Traditional Curriculum students and 206 for Parallel Curriculum students (t-value=1.08, P=0.30). Statistically significant main effects were noted by cohort year and curricular track for both the Step 1 and Step 2 examinations. The totality of experience in both groups, although differing by curricular type, may be similar enough that the comparable scores are what should be expected. These results should be reassuring to curricular planners and faculty that problem-based learning can provide students with the knowledge needed for the subsequent phases of their medical education.

Are emergency medical technician-basics able to use a selective immobilization of the cervical spine protocol?: a preliminary report.

PubMed

Dunn, Thomas M; Dalton, Alice; Dorfman, Todd; Dunn, William W

2004-01-01

To be a first step in determining whether emergency medicine technician (EMT)-Basics are capable of using a protocol that allows for selective immobilization of the cervical spine. Such protocols are coming into use at an advanced life support level and could be beneficial when used by basic life support providers. A convenience sample of participants (n=95) from 11 emergency medical services agencies and one college class participated in the study. All participants evaluated six patients in written scenarios and decided which should be placed into spinal precautions according to a selective spinal immobilization protocol. Systems without an existing selective spinal immobilization protocol received a one-hour continuing education lecture regarding the topic. College students received a similar lecture written so laypersons could understand the protocol. All participants showed proficiency when applying a selective immobilization protocol to patients in paper-based scenarios. Furthermore, EMT-Basics performed at the same level as paramedics when following the protocol. Statistical analysis revealed no significant differences between EMT-Basics and paramedics. A follow-up group of college students (added to have a non-EMS comparison group) also performed as well as paramedics when making decisions to use spinal precautions. Differences between college students and paramedics were also statistically insignificant. The results suggest that EMT-Basics are as accurate as paramedics when making decisions regarding selective immobilization of the cervical spine during paper-based scenarios. That laypersons are also proficient when using the protocol could indicate that it is extremely simple to follow. This study is a first step toward the necessary additional studies evaluating the efficacy of EMT-Basics using selective immobilization as a regular practice.

Building the Service-Based Library Web Site: A Step-by-Step Guide to Design and Options.

ERIC Educational Resources Information Center

Garlock, Kristen L.; Piontek, Sherry

The World Wide Web, with its captivating multimedia features and hypertext capabilities, has brought millions of new users to the Internet. Library staff who could create a home page on the Web could present basic information about the library and its services, showcase its resources, create links to quality material inside and outside the…

Let's talk it over : interagency cooperation facilities success : a case study : the New York, New Jersey, Connecticut metropolitan area TRANSMIT operational test : ensuring integration of intelligent transportation systems products and services

DOT National Transportation Integrated Search

1989-01-01

This manual provides basic background information and step-by-step procedures for conducting traffic conflict surveys at signalized and unsignalized intersections. The manual was prepared as a training aid and reference source for persons who are ass...

Game-Coding Workshops in New Zealand Public Libraries: Evaluation of a Pilot Project

ERIC Educational Resources Information Center

Bolstad, Rachel

2016-01-01

This report evaluates a game coding workshop offered to young people and adults in seven public libraries round New Zealand. Participants were taken step by step through the process of creating their own simple 2D videogame, learning the basics of coding, computational thinking, and digital game design. The workshops were free and drew 426 people…

The Role of Vocational Educators in Planning Vocational Assessment Activities for Handicapped Students: An Indepth Review of a Six Step Model.

ERIC Educational Resources Information Center

Stodden, Robert A.; Boone, Rosalie

1986-01-01

Discusses the role of teachers in providing vocational assessment to disabled students. Steps in this process include (1) establish planning team and conduct information search, (2) define purpose, (3) establish basic considerations, (4) formulate assessment model, (5) establish implementation focus, and (6) pilot test and evaluate assessment…

Library Public Relations, Promotions, and Communications: A How-To-Do-It Manual. How-To-Do-It Manuals for Librarians Number 75.

ERIC Educational Resources Information Center

Wolfe, Lisa A.

This book provides an introduction to basic communications concepts, a step-by-step process for developing and implementing a library public relations/communications plan, and descriptions of effective library communications tools and strategies. Detailed examples of the application of solid communications planning in school, public, academic, and…

Learning To Use the World Wide Web. Academic Edition.

ERIC Educational Resources Information Center

Ackerman, Ernest

This book emphasizes how to use Netscape Navigator to access the World Wide Web and associated resources and services in a step-by-step, organized manner. Chapters include -- Chapter 1: Introduction to the World Wide Web and the Internet; Chapter 2: Using a Web Browser; Chapter 3: The Basics of Electronic Mail and Using Netscape Email; Chapter 4:…

45 CFR 263.9 - May a State avoid a penalty for failing to meet the basic MOE requirement through reasonable...

Code of Federal Regulations, 2010 CFR

2010-10-01

... the basic MOE requirement through reasonable cause or corrective compliance? 263.9 Section 263.9... FEDERAL TANF FUNDS What Rules Apply to a State's Maintenance of Effort? § 263.9 May a State avoid a penalty for failing to meet the basic MOE requirement through reasonable cause or corrective compliance...

Basic-Education Mexican Teachers' Knowledge of Biotechnology and Attitudes about the Consumption of Genetically Modified Foods

ERIC Educational Resources Information Center

Jiménez-Salas, Zacarías; Campos-Góngora, Eduardo; González-Martínez, Blanca E.; Tijerina-Sáenz, Alexandra; Escamilla-Méndez, Angélica D.; Ramírez-López, Erik

2017-01-01

Over the past few years, a new research field has emerged, focusing on the social-scientific criteria for the study of opinions toward genetically modified foods (GMFs), since these may be limiting factors for the success or failure of these products. Basic education is the first step in the Mexican education system, and teachers may wield an…

Exploration and practice of the cultivation of optoelectronic innovative talents based on the Students Innovation Training Program

NASA Astrophysics Data System (ADS)

Lei, Bing; Liu, Wei; Shi, Jianhua; Yao, Tianfu; Wang, Wei; Hu, Haojun

2017-08-01

The Students Innovation Training Program (SITP) has become an effective method to impel the teaching reform and improve undergraduate's innovative practical ability in Chinese colleges and universities, which is quite helpful for students to understand the social requirement, to grasp the basic means of scientific research and to improve their innovative practical ability and team work spirit. In this paper, three problems have been analyzed and discussed based on our organizing and instructing experience of SITP in recent years. Firstly, the SITP is a synthetically training project, and it is quite suitable to cultivate the students' innovative practical ability. Because SITP is similar to the real scientific research activity, and both of them include the steps of project application, solution design, research implementation and project summary etc. By making great efforts to these basic training steps, the undergraduates' innovative practical ability has been improved systemically. Secondly, a new talents cultivation system has been constructed based on SITP by integrating the subject competitions, graduation design and other conventional training activities, which is quite good to improve the training quality and decrease the total training class hours. Thirdly, a series of long-term effective operation and management guidelines have been established to ensure the SITP work normally, including doing a good job of project evaluation, setting up a reward and punishment system and creating a good atmosphere for innovation. In conclusion, great efforts have been made to enhance undergraduates' innovative ability, and the research results will provide useful reference for improving the training effects and reforming talents cultivating mode further.

A macrosonic system for industrial processing

PubMed

Gallego-Juarez; Rodriguez-Corral; Riera-Franco de Sarabia E; Campos-Pozuelo; Vazquez-Martinez; Acosta-Aparicio

2000-03-01

The development of high-power applications of sonic and ultrasonic energy in industrial processing requires a great variety of practical systems with characteristics which are dependent on the effect to be exploited. Nevertheless, the majority of systems are basically constituted of a treatment chamber and one or several transducers coupled to it. Therefore, the feasibility of the application mainly depends on the efficiency of the transducer-chamber system. This paper deals with a macrosonic system which is essentially constituted of a high-power transducer with a double stepped-plate radiator coupled to a chamber of square section. The radiator, which has a rectangular shape, is placed on one face of the chamber in order to drive the inside fluid volume. The stepped profile of the radiator allows a piston-like radiation to be obtained. The radiation from the back face of the radiator is also applied to the chamber by using adequate reflectors. Transducer-chamber systems for sonic and ultrasonic frequencies have been developed with power capacities up to about 5 kW for the treatment of fluid volumes of several cubic meters. The characteristics of these systems are presented in this paper.

Insight into D-A-π-A Structured Sensitizers: A Promising Route to Highly Efficient and Stable Dye-Sensitized Solar Cells.

PubMed

Wu, Yongzhen; Zhu, Wei-Hong; Zakeeruddin, Shaik M; Grätzel, Michael

2015-05-13

The dye-sensitized solar cell (DSSC) is one of the most promising photovoltaic technologies with potential of low cost, light weight, and good flexibility. The practical application of DSSCs requires further improvement in power conversion efficiency and long-term stability. Recently, significant progress has been witnessed in DSSC research owing to the novel concept of the D-A-π-A motif for the molecular engineering of organic photosensitizers. New organic and porphyrin dyes based on the D-A-π-A motif can not only enhance photovoltaic performance, but also improve durability in DSSC applications. This Spotlight on Applications highlights recent advances in the D-A-π-A-based photosensitizers, specifically focusing on the mechanism of efficiency and stability enhancements. Also, we find insight into the additional acceptor as well as the trade-off of long wavelength response. The basic principles are involved in molecular engineering of efficient D-A-π-A sensitizers, providing a clear road map showing how to modulate the energy bands, rationally extending the response wavelength, and optimizing photovoltaic efficiency step by step.

Step Bunching: Influence of Impurities and Solution Flow

NASA Technical Reports Server (NTRS)

Chernov, A. A.; Vekilov, P. G.; Coriell, S. R.; Murray, B. T.; McFadden, G. B.

1999-01-01

Step bunching results in striations even at relatively early stages of its development and in inclusions of mother liquor at the later stages. Therefore, eliminating step bunching is crucial for high crystal perfection. At least 5 major effects causing and influencing step bunching are known: (1) Basic morphological instability of stepped interfaces. It is caused by concentration gradient in the solution normal to the face and by the redistribution of solute tangentially to the interface which redistribution enhances occasional perturbations in step density due to various types of noise; (2) Aggravation of the above basic instability by solution flowing tangentially to the face in the same directions as the steps or stabilization of equidistant step train if these flows are antiparallel; (3) Enhanced bunching at supersaturation where step velocity v increases with relative supersaturation s much faster than linear. This v(s) dependence is believed to be associated with impurities. The impurities of which adsorption time is comparable with the time needed to deposit one lattice layer may also be responsible for bunching; (4) Very intensive solution flow stabilizes growing interface even at parallel solution and step flows; (5) Macrosteps were observed to nucleate at crystal corners and edges. Numerical simulation, assuming step-step interactions via surface diffusion also show that step bunching may be induced by random step nucleation at the facet edge and by discontinuity in the step density (a ridge) somewhere in the middle of a face. The corresponding bunching patterns produce the ones observed in experiment. The nature of step bunching generated at the corners and edges and by dislocation step sources, as well as the also relative importance and interrelations between mechanisms 1-5 is not clear, both from experimental and theoretical standpoints. Furthermore, several laws controlling the evolution of existing step bunches have been suggested, though unambiguous conclusions are still missing. Addressing these issues is the major goal of the present project. The theory addressing the above problem, experimental methods, several figures which include: (1) the spatial wave numbers at which the system is neutrally stable as a function of growth velocity for linear kinetics and supersaturation for nonlinear kinetics; (2) a schematic of the experiment of lysozyme crystal growing under conditions of natural convection; (3) fluctuations in time, t, of the normal growth rate, R(t), vicinal slope, p(t) and Fourier Spectra of R(t), discussions and conclusions are presented.

A step by step selection method for the location and the size of a waste-to-energy facility targeting the maximum output energy and minimization of gate fee.

PubMed

Kyriakis, Efstathios; Psomopoulos, Constantinos; Kokkotis, Panagiotis; Bourtsalas, Athanasios; Themelis, Nikolaos

2017-06-23

This study attempts the development of an algorithm in order to present a step by step selection method for the location and the size of a waste-to-energy facility targeting the maximum output energy, also considering the basic obstacle which is in many cases, the gate fee. Various parameters identified and evaluated in order to formulate the proposed decision making method in the form of an algorithm. The principle simulation input is the amount of municipal solid wastes (MSW) available for incineration and along with its net calorific value are the most important factors for the feasibility of the plant. Moreover, the research is focused both on the parameters that could increase the energy production and those that affect the R1 energy efficiency factor. Estimation of the final gate fee is achieved through the economic analysis of the entire project by investigating both expenses and revenues which are expected according to the selected site and outputs of the facility. In this point, a number of commonly revenue methods were included in the algorithm. The developed algorithm has been validated using three case studies in Greece-Athens, Thessaloniki, and Central Greece, where the cities of Larisa and Volos have been selected for the application of the proposed decision making tool. These case studies were selected based on a previous publication made by two of the authors, in which these areas where examined. Results reveal that the development of a «solid» methodological approach in selecting the site and the size of waste-to-energy (WtE) facility can be feasible. However, the maximization of the energy efficiency factor R1 requires high utilization factors while the minimization of the final gate fee requires high R1 and high metals recovery from the bottom ash as well as economic exploitation of recovered raw materials if any.

Molecular mechanism for generation of antibody memory.

PubMed

Shivarov, Velizar; Shinkura, Reiko; Doi, Tomomitsu; Begum, Nasim A; Nagaoka, Hitoshi; Okazaki, Il-Mi; Ito, Satomi; Nonaka, Taichiro; Kinoshita, Kazuo; Honjo, Tasuku

2009-03-12

Activation-induced cytidine deaminase (AID) is the essential enzyme inducing the DNA cleavage required for both somatic hypermutation and class switch recombination (CSR) of the immunoglobulin gene. We originally proposed the RNA-editing model for the mechanism of DNA cleavage by AID. We obtained evidence that fulfils three requirements for CSR by this model, namely (i) AID shuttling between nucleus and cytoplasm, (ii) de novo protein synthesis for CSR, and (iii) AID-RNA complex formation. The alternative hypothesis, designated as the DNA-deamination model, assumes that the in vitro DNA deamination activity of AID is representative of its physiological function in vivo. Furthermore, the resulting dU was removed by uracil DNA glycosylase (UNG) to generate a basic site, followed by phosphodiester bond cleavage by AP endonuclease. We critically examined each of these provisional steps. We identified a cluster of mutants (H48A, L49A, R50A and N51A) that had particularly higher CSR activities than expected from their DNA deamination activities. The most striking was the N51A mutant that had no ability to deaminate DNA in vitro but retained approximately 50 per cent of the wild-type level of CSR activity. We also provide further evidence that UNG plays a non-canonical role in CSR, namely in the repair step of the DNA breaks. Taking these results together, we favour the RNA-editing model for the function of AID in CSR.

A Generic Data Harmonization Process for Cross-linked Research and Network Interaction. Construction and Application for the Lung Cancer Phenotype Database of the German Center for Lung Research.

PubMed

Firnkorn, D; Ganzinger, M; Muley, T; Thomas, M; Knaup, P

2015-01-01

Joint data analysis is a key requirement in medical research networks. Data are available in heterogeneous formats at each network partner and their harmonization is often rather complex. The objective of our paper is to provide a generic approach for the harmonization process in research networks. We applied the process when harmonizing data from three sites for the Lung Cancer Phenotype Database within the German Center for Lung Research. We developed a spreadsheet-based solution as tool to support the harmonization process for lung cancer data and a data integration procedure based on Talend Open Studio. The harmonization process consists of eight steps describing a systematic approach for defining and reviewing source data elements and standardizing common data elements. The steps for defining common data elements and harmonizing them with local data definitions are repeated until consensus is reached. Application of this process for building the phenotype database led to a common basic data set on lung cancer with 285 structured parameters. The Lung Cancer Phenotype Database was realized as an i2b2 research data warehouse. Data harmonization is a challenging task requiring informatics skills as well as domain knowledge. Our approach facilitates data harmonization by providing guidance through a uniform process that can be applied in a wide range of projects.

Low-cost real-time automatic wheel classification system

NASA Astrophysics Data System (ADS)

Shabestari, Behrouz N.; Miller, John W. V.; Wedding, Victoria

1992-11-01

This paper describes the design and implementation of a low-cost machine vision system for identifying various types of automotive wheels which are manufactured in several styles and sizes. In this application, a variety of wheels travel on a conveyor in random order through a number of processing steps. One of these processes requires the identification of the wheel type which was performed manually by an operator. A vision system was designed to provide the required identification. The system consisted of an annular illumination source, a CCD TV camera, frame grabber, and 386-compatible computer. Statistical pattern recognition techniques were used to provide robust classification as well as a simple means for adding new wheel designs to the system. Maintenance of the system can be performed by plant personnel with minimal training. The basic steps for identification include image acquisition, segmentation of the regions of interest, extraction of selected features, and classification. The vision system has been installed in a plant and has proven to be extremely effective. The system properly identifies the wheels correctly up to 30 wheels per minute regardless of rotational orientation in the camera's field of view. Correct classification can even be achieved if a portion of the wheel is blocked off from the camera. Significant cost savings have been achieved by a reduction in scrap associated with incorrect manual classification as well as a reduction of labor in a tedious task.

Image editing with Adobe Photoshop 6.0.

PubMed

Caruso, Ronald D; Postel, Gregory C

2002-01-01

The authors introduce Photoshop 6.0 for radiologists and demonstrate basic techniques of editing gray-scale cross-sectional images intended for publication and for incorporation into computerized presentations. For basic editing of gray-scale cross-sectional images, the Tools palette and the History/Actions palette pair should be displayed. The History palette may be used to undo a step or series of steps. The Actions palette is a menu of user-defined macros that save time by automating an action or series of actions. Converting an image to 8-bit gray scale is the first editing function. Cropping is the next action. Both decrease file size. Use of the smallest file size necessary for the purpose at hand is recommended. Final file size for gray-scale cross-sectional neuroradiologic images (8-bit, single-layer TIFF [tagged image file format] at 300 pixels per inch) intended for publication varies from about 700 Kbytes to 3 Mbytes. Final file size for incorporation into computerized presentations is about 10-100 Kbytes (8-bit, single-layer, gray-scale, high-quality JPEG [Joint Photographic Experts Group]), depending on source and intended use. Editing and annotating images before they are inserted into presentation software is highly recommended, both for convenience and flexibility. Radiologists should find that image editing can be carried out very rapidly once the basic steps are learned and automated. Copyright RSNA, 2002

42 CFR 438.802 - Basic requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 4 2011-10-01 2011-10-01 false Basic requirements. 438.802 Section 438.802 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS MANAGED CARE Conditions for Federal Financial Participation § 438.802 Basic...

42 CFR 438.802 - Basic requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 4 2013-10-01 2013-10-01 false Basic requirements. 438.802 Section 438.802 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS MANAGED CARE Conditions for Federal Financial Participation § 438.802 Basic...

42 CFR 438.802 - Basic requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 4 2012-10-01 2012-10-01 false Basic requirements. 438.802 Section 438.802 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS MANAGED CARE Conditions for Federal Financial Participation § 438.802 Basic...

42 CFR 438.802 - Basic requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 4 2014-10-01 2014-10-01 false Basic requirements. 438.802 Section 438.802 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS MANAGED CARE Conditions for Federal Financial Participation § 438.802 Basic...

42 CFR 438.802 - Basic requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Basic requirements. 438.802 Section 438.802 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS MANAGED CARE Conditions for Federal Financial Participation § 438.802 Basic...

42 CFR 489.10 - Basic requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Basic requirements. 489.10 Section 489.10 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION PROVIDER AGREEMENTS AND SUPPLIER APPROVAL General Provisions § 489.10 Basic...

42 CFR 489.10 - Basic requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 5 2011-10-01 2011-10-01 false Basic requirements. 489.10 Section 489.10 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION PROVIDER AGREEMENTS AND SUPPLIER APPROVAL General Provisions § 489.10 Basic...

Third Party TMDL Development Toolkit

EPA Pesticide Factsheets

Water Environment Federation's toolkit provides basic steps in which an organization or group other than the lead water quality agency takes responsibility for developing the TMDL document and supporting analysis.

Components of the Engulfment Machinery Have Distinct Roles in Corpse Processing

PubMed Central

Meehan, Tracy L.; Joudi, Tony F.; Timmons, Allison K.; Taylor, Jeffrey D.; Habib, Corey S.; Peterson, Jeanne S.; Emmanuel, Shanan; Franc, Nathalie C.; McCall, Kimberly

2016-01-01

Billions of cells die in our bodies on a daily basis and are engulfed by phagocytes. Engulfment, or phagocytosis, can be broken down into five basic steps: attraction of the phagocyte, recognition of the dying cell, internalization, phagosome maturation, and acidification. In this study, we focus on the last two steps, which can collectively be considered corpse processing, in which the engulfed material is degraded. We use the Drosophila ovarian follicle cells as a model for engulfment of apoptotic cells by epithelial cells. We show that engulfed material is processed using the canonical corpse processing pathway involving the small GTPases Rab5 and Rab7. The phagocytic receptor Draper is present on the phagocytic cup and on nascent, phosphatidylinositol 3-phosphate (PI(3)P)- and Rab7-positive phagosomes, whereas integrins are maintained on the cell surface during engulfment. Due to the difference in subcellular localization, we investigated the role of Draper, integrins, and downstream signaling components in corpse processing. We found that some proteins were required for internalization only, while others had defects in corpse processing as well. This suggests that several of the core engulfment proteins are required for distinct steps of engulfment. We also performed double mutant analysis and found that combined loss of draper and αPS3 still resulted in a small number of engulfed vesicles. Therefore, we investigated another known engulfment receptor, Crq. We found that loss of all three receptors did not inhibit engulfment any further, suggesting that Crq does not play a role in engulfment by the follicle cells. A more complete understanding of how the engulfment and corpse processing machinery interact may enable better understanding and treatment of diseases associated with defects in engulfment by epithelial cells. PMID:27347682

Making an Adjustable C-Clamp. Kit No. 603. Instructor's Manual [and] Student Learning Activity Manual. [Revised.] T & I--Metalwork.

ERIC Educational Resources Information Center

White, Jim; Alexander, Larry

This student activity kit consists of a programmed, self-instructional learning guide and an accompanying instructor's manual for use in teaching trade and industrial education students how to make an adjustable C-clamp. The student guide contains step-by-step instructions in the following areas: basic layout principles; use of a hack saw, file,…

The Problem of Existence

DTIC Science & Technology

1985-01-01

envisionment) produced by GIZMO . ? In the envisionment, I s indicates the set of quantity—conditioned individuals that exists during a situa- tion...envisionment step by step . In START, the initial state, GIZMO deduces that heat flow occurs, since there is assumed to be a temperature difference between the...stov e GIZMO implements the basic operations of qualitative process theory, including an envisioner for makin g predictions and a program for

Operational procedures for ground station operation: ATS-3 Hawaii-Ames satellite link experiment

NASA Technical Reports Server (NTRS)

Nishioka, K.; Gross, E. H.

1979-01-01

Hardware description and operational procedures for the ATS-3 Hawaii-Ames satellite computer link are presented in basic step-by-step instructions. Transmit and receive channels and frequencies are given. Details such as switch settings for activating the station to the sequence of turning switches on are provided. Methods and procedures for troubleshooting common problems encountered with communication stations are also provided.

10 Tips for Getting Grants to Keep Your Library Afloat

ERIC Educational Resources Information Center

McCune, Bonnie

2007-01-01

In this article, the author, taking the view of the foundation or the grant giver, shares the basic steps on how funders assess requests for grants. Each of these steps may be waived if a key member of the selection process, such as a board member, has a personal interest in the application. The following are 10 tips from the funders' point of…

Setting Up Git Software Tool on Linux | High-Performance Computing | NREL

Science.gov Websites

system. Before you can get started using the github.nrel.gov git repos, you'll have to do some basic shell (SSH) keys created on those systems. If this is the case, for more information, see using the git Steps - Using a Remote Git Repository Now you have all the basic configuration for using git with a

Dissolution-modulating mechanism of pH modifiers in solid dispersion containing weakly acidic or basic drugs with poor water solubility.

PubMed

Tran, Phuong Ha-Lien; Tran, Thao Truong-Dinh; Lee, Kyoung-Ho; Kim, Dong-Jin; Lee, Beom-Jin

2010-05-01

Although the solid dispersion method has been known to increase the dissolution rate of poorly water-soluble drugs by dispersing them in hydrophilic carriers, one obstacle of the solid dispersion method is its limited solubilization capacity, especially for pH-dependent soluble drugs. pH-modified solid dispersion, in which pH modifiers are incorporated, may be a useful method for increasing the dissolution rate of weakly acidic or basic drugs. Sufficient research, including the most recent reports, was undertaken in this review. How could the inclusion of the pH the pH modifiers in the solid dispersion system change drug structural behaviors, molecular interactions, microenvironmental pH, and/or release rate of pH modifiers, relating with the enhanced dissolution of weakly acidic or weakly basic drugs with poor water solubility? These questions have been investigated to determine the dissolution-modulating mechanism of pH modifiers in solid dispersion containing weakly acidic or basic drugs. It is believed that step-by-step mechanistic approaches could provide the ultimate solution for solubilizing several poorly water-soluble drugs with pH-dependent solubility from a solid dispersion system, as well as provide ideas for developing future dosage systems.

Effective constitutive relations for large repetitive frame-like structures

NASA Technical Reports Server (NTRS)

Nayfeh, A. H.; Hefzy, M. S.

1981-01-01

Effective mechanical properties for large repetitive framelike structures are derived using combinations of strength of material and orthogonal transformation techniques. Symmetry considerations are used in order to identify independent property constants. The actual values of these constants are constructed according to a building block format which is carried out in the three consecutive steps: (1) all basic planar lattices are identified; (2) effective continuum properties are derived for each of these planar basic grids using matrix structural analysis methods; and (3) orthogonal transformations are used to determine the contribution of each basic set to the overall effective continuum properties of the structure.

Bench to bedside: integrating advances in basic science into daily clinical practice.

PubMed

McGoldrick, Rory B; Hui, Kenneth; Chang, James

2014-08-01

This article focuses on the initial steps of commercial development of a patentable scientific discovery from an academic center through to marketing a clinical product. The basics of partnering with a technology transfer office (TTO) and the complex process of patenting are addressed, followed by a discussion on marketing and licensing the patent to a company in addition to starting a company. Finally, the authors address the basic principles of obtaining clearance from the Food and Drugs Administration, production in a good manufacturing practice (GMP) facility, and bringing the product to clinical trial. Published by Elsevier Inc.

Apollo 15 time and motion study

NASA Technical Reports Server (NTRS)

Kubis, J. F.; Elrod, J. T.; Rusnak, R.; Barnes, J. E.

1972-01-01

A time and motion study of Apollo 15 lunar surface activity led to examination of four distinct areas of crewmen activity. These areas are: an analysis of lunar mobility, a comparative analysis of tasks performed in 1-g training and lunar EVA, an analysis of the metabolic cost of two activities that are performed in several EVAs, and a fall/near-fall analysis. An analysis of mobility showed that the crewmen used three basic mobility patterns (modified walk, hop, side step) while on the lunar surface. These mobility patterns were utilized as adaptive modes to compensate for the uneven terrain and varied soil conditions that the crewmen encountered. A comparison of the time required to perform tasks at the final 1-g lunar EVA training sessions and the time required to perform the same task on the lunar surface indicates that, in almost all cases, it took significantly more time (on the order of 40%) to perform tasks on the moon. This increased time was observed even after extraneous factors (e.g., hardware difficulties) were factored out.

A design study for the use of a multiple aperture deployable antenna for soil moisture remote sensing satellite applications

NASA Technical Reports Server (NTRS)

Foldes, P.

1986-01-01

The instrumentation problems associated with the measurement of soil moisture with a meaningful spatial and temperature resolution at a global scale are addressed. For this goal only medium term available affordable technology will be considered. The study while limited in scope, will utilize a large scale antenna structure, which is being developed presently as an experimental model. The interface constraints presented by a singel Space Transportation System (STS) flight will be assumed. Methodology consists of the following steps: review of science requirements; analyze effects of these requirements; present basic system engineering considerations and trade-offs related to orbit parameters, number of spacecraft and their lifetime, observation angles, beamwidth, crossover and swath, coverage percentage, beam quality and resolution, instrument quantities, and integration time; bracket the key system characteristics and develop an electromagnetic design of the antenna-passive radiometer system. Several aperture division combinations and feed array concepts are investigated to achieve maximum feasible performacne within the stated STS constraints.

Processing Satellite Images on Tertiary Storage: A Study of the Impact of Tile Size on Performance

NASA Technical Reports Server (NTRS)

Yu, JieBing; DeWitt, David J.

1996-01-01

Before raw data from a satellite can be used by an Earth scientist, it must first undergo a number of processing steps including basic processing, cleansing, and geo-registration. Processing actually expands the volume of data collected by a factor of 2 or 3 and the original data is never deleted. Thus processing and storage requirements can exceed 2 terrabytes/day. Once processed data is ready for analysis, a series of algorithms (typically developed by the Earth scientists) is applied to a large number of images in a data set. The focus of this paper is how best to handle such images stored on tape using the following assumptions: (1) all images of interest to a scientist are stored on a single tape, (2) images are accessed and processed in the order that they are stored on tape, and (3) the analysis requires access to only a portion of each image and not the entire image.

Glass frit nebulizer for atomic spectrometry

USGS Publications Warehouse

Layman, L.R.

1982-01-01

The nebuilizatlon of sample solutions Is a critical step In most flame or plasma atomic spectrometrlc methods. A novel nebulzatlon technique, based on a porous glass frit, has been Investigated. Basic operating parameters and characteristics have been studied to determine how thte new nebulizer may be applied to atomic spectrometrlc methods. The results of preliminary comparisons with pneumatic nebulizers Indicate several notable differences. The frit nebulizer produces a smaller droplet size distribution and has a higher sample transport efficiency. The mean droplet size te approximately 0.1 ??m, and up to 94% of the sample te converted to usable aerosol. The most significant limitations In the performance of the frit nebulizer are the stow sample equMbratton time and the requirement for wash cycles between samples. Loss of solute by surface adsorption and contamination of samples by leaching from the glass were both found to be limitations only In unusual cases. This nebulizer shows great promise where sample volume te limited or where measurements require long nebullzatlon times.

Generation of basic centers in high-silica zeolites and their application in gas-phase upgrading of bio-oil.

PubMed

Keller, Tobias C; Rodrigues, Elodie G; Pérez-Ramírez, Javier

2014-06-01

High-silica zeolites have been reported recently as efficient catalysts for liquid- and gas-phase condensation reactions because of the presence of a complementary source of basicity compared to Al-rich basic zeolites. Herein, we describe the controlled generation of these active sites on silica-rich FAU, BEA, and MFI zeolites. Through the application of a mild base treatment in aqueous Na2CO3, alkali-metal-coordinating defects are generated within the zeolite whereas the porous properties are fully preserved. The resulting catalysts were applied in the gas-phase condensation of propanal at 673 K as a model reaction for the catalytic upgrading of pyrolysis oil, for which an up to 20-fold increased activity compared to the unmodified zeolites was attained. The moderate basicity of these new sites leads to a coke resistance superior to traditional base catalysts such as CsX and MgO, and comparable activity and excellent selectivity is achieved for the condensation pathways. Through strategic acid and base treatments and the use of magic-angle spinning NMR spectroscopy, the nature of the active sites was investigated, which supports the theory of siloxy sites as basic centers. This contribution represents a key step in the understanding and design of high-silica base catalysts for the intermediate deoxygenation of crude bio-oil prior to the hydrotreating step for the production of second-generation biofuels. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

46 CFR 15.1105 - Familiarization and basic safety-training.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Familiarization and basic safety-training. 15.1105 Section 15.1105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Vessels Subject to Requirements of STCW § 15.1105 Familiarization and basic safety...

46 CFR 15.1105 - Familiarization and basic safety-training.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Familiarization and basic safety-training. 15.1105 Section 15.1105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Vessels Subject to Requirements of STCW § 15.1105 Familiarization and basic safety...

46 CFR 15.1105 - Familiarization and basic safety-training.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Familiarization and basic safety-training. 15.1105 Section 15.1105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Vessels Subject to Requirements of STCW § 15.1105 Familiarization and basic safety...

46 CFR 15.1105 - Familiarization and basic safety-training.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Familiarization and basic safety-training. 15.1105 Section 15.1105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Vessels Subject to Requirements of STCW § 15.1105 Familiarization and basic safety...

40 CFR 141.133 - Compliance requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... specified by § 141.135(c). Systems may begin monitoring to determine whether Step 1 TOC removals can be met... the Step 1 requirements in § 141.135(b)(2) and must therefore apply for alternate minimum TOC removal (Step 2) requirements, is not eligible for retroactive approval of alternate minimum TOC removal (Step 2...

15 CFR 732.6 - Steps for other requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Steps for other requirements. 732.6...) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE EXPORT ADMINISTRATION REGULATIONS STEPS FOR USING THE EAR § 732.6 Steps for other requirements. Sections 732.1 through 732.4 of this part are useful in...

29 CFR 548.200 - Requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Requirements. 548.200 Section 548.200 Labor Regulations... ESTABLISHED BASIC RATES FOR COMPUTING OVERTIME PAY Interpretations Requirements for A Basic Rate § 548.200 Requirements. The following conditions must be satisfied if a “basic” rate is to be considered proper under...

29 CFR 548.200 - Requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Requirements. 548.200 Section 548.200 Labor Regulations... ESTABLISHED BASIC RATES FOR COMPUTING OVERTIME PAY Interpretations Requirements for A Basic Rate § 548.200 Requirements. The following conditions must be satisfied if a “basic” rate is to be considered proper under...

29 CFR 548.200 - Requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Requirements. 548.200 Section 548.200 Labor Regulations... ESTABLISHED BASIC RATES FOR COMPUTING OVERTIME PAY Interpretations Requirements for A Basic Rate § 548.200 Requirements. The following conditions must be satisfied if a “basic” rate is to be considered proper under...

Digital logic optimization using selection operators

NASA Technical Reports Server (NTRS)

Whitaker, Sterling R. (Inventor); Miles, Lowell H. (Inventor); Cameron, Eric G. (Inventor); Gambles, Jody W. (Inventor)

2004-01-01

According to the invention, a digital design method for manipulating a digital circuit netlist is disclosed. In one step, a first netlist is loaded. The first netlist is comprised of first basic cells that are comprised of first kernel cells. The first netlist is manipulated to create a second netlist. The second netlist is comprised of second basic cells that are comprised of second kernel cells. A percentage of the first and second kernel cells are selection circuits. There is less chip area consumed in the second basic cells than in the first basic cells. The second netlist is stored. In various embodiments, the percentage could be 2% or more, 5% or more, 10% or more, 20% or more, 30% or more, or 40% or more.

Guide to Health: A Randomized Controlled Trial of the Effects of a Completely WEB-Based Intervention on Physical Activity, Fruit and Vegetable Consumption, and Body Weight.

PubMed

Winett, Richard A; Anderson, Eileen S; Wojcik, Janet R; Winett, Sheila G; Moore, Shane; Blake, Chad

2011-03-01

Theory-based, efficacious, long-term, completely Internet-based interventions are needed to induce favorable shifts in health behaviors and prevent weight gain. To assess nutrition, physical activity, and, secondarily, body weight outcomes in the tailored, social cognitive theory Guide to Health ( WB-GTH ) program with all recruitment, assessment, and intervention performed on the Internet. The focus of the efficacy study was engaged participants who completed 3 or more program modules plus baseline, 6-months post and, 16-months follow-up assessments (n = 247). To be eligible, participants needed to be between 18-63 years of age, with a BMI between 23-39, sedentary to low-active but otherwise healthy. Participant had a mean age of 45.5 years (10.3), 86.2% were female, with 8.5% from minority groups, with a mean 17.5 (3.0) years of education, and had a median annual household income of about $85k. Nevertheless, about 83% were overweight or obese and about 75% were sedentary (i.e., <5000 steps/day) or had low levels of activity (i.e., 5,000 - 7499 steps/day). Participants were randomized to the WB-GTH-Basic intervention or WB-GTH-Enhanced intervention. Content, overall target behaviors, program goals and strategies were the same in the two interventions with the difference that Basic included a generic feedback and planning approach and Enhanced included a highly tailored planning and feedback approach. Participants reported at assessments pedometer step counts to assess physical activity, bodyweight from a scale provided, and fruit and vegetable (F&V) servings were assessed from food frequency questionnaires completed online. Participants in both Basic and Enhanced at follow-up increased physical activity by about 1400 steps/day, lost about 3% of bodyweight, and increased F&V by about 1.5 serving/day. There was evidence that the least physically active, those who were obese, and those with poorest nutrition made greater long-term improvements. Given similar outcomes for Basic and Enhanced , a relatively simple entirely Internet-based program can help people improve health behaviors and prevent weight gain.

49 CFR 399.207 - Truck and truck-tractor access requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... requirements: (1) Vertical height. All measurements of vertical height shall be made from ground level with the... vertical height of the first step shall be no more than 609 millimeters (24 inches) from ground level. (3... requirement. The step need not retain the disc at rest. (5) Step strength. Each step must withstand a vertical...

49 CFR 399.207 - Truck and truck-tractor access requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... requirements: (1) Vertical height. All measurements of vertical height shall be made from ground level with the... vertical height of the first step shall be no more than 609 millimeters (24 inches) from ground level. (3... requirement. The step need not retain the disc at rest. (5) Step strength. Each step must withstand a vertical...

49 CFR 399.207 - Truck and truck-tractor access requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... requirements: (1) Vertical height. All measurements of vertical height shall be made from ground level with the... vertical height of the first step shall be no more than 609 millimeters (24 inches) from ground level. (3... requirement. The step need not retain the disc at rest. (5) Step strength. Each step must withstand a vertical...

49 CFR 399.207 - Truck and truck-tractor access requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... requirements: (1) Vertical height. All measurements of vertical height shall be made from ground level with the... vertical height of the first step shall be no more than 609 millimeters (24 inches) from ground level. (3... requirement. The step need not retain the disc at rest. (5) Step strength. Each step must withstand a vertical...

45 CFR 263.8 - What happens if a State fails to meet the basic MOE requirement?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 2 2014-10-01 2012-10-01 true What happens if a State fails to meet the basic MOE...? § 263.8 What happens if a State fails to meet the basic MOE requirement? (a) If any State fails to meet... SFAG payable to the State for the following fiscal year. (b) If a State fails to meet its basic MOE...

45 CFR 263.8 - What happens if a State fails to meet the basic MOE requirement?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 2 2013-10-01 2012-10-01 true What happens if a State fails to meet the basic MOE...? § 263.8 What happens if a State fails to meet the basic MOE requirement? (a) If any State fails to meet... SFAG payable to the State for the following fiscal year. (b) If a State fails to meet its basic MOE...

Reinventing Biostatistics Education for Basic Scientists

PubMed Central

Weissgerber, Tracey L.; Garovic, Vesna D.; Milin-Lazovic, Jelena S.; Winham, Stacey J.; Obradovic, Zoran; Trzeciakowski, Jerome P.; Milic, Natasa M.

2016-01-01

Numerous studies demonstrating that statistical errors are common in basic science publications have led to calls to improve statistical training for basic scientists. In this article, we sought to evaluate statistical requirements for PhD training and to identify opportunities for improving biostatistics education in the basic sciences. We provide recommendations for improving statistics training for basic biomedical scientists, including: 1. Encouraging departments to require statistics training, 2. Tailoring coursework to the students’ fields of research, and 3. Developing tools and strategies to promote education and dissemination of statistical knowledge. We also provide a list of statistical considerations that should be addressed in statistics education for basic scientists. PMID:27058055

Determination of Total Biotin by Liquid Chromatography Coupled with Immunoaffinity Column Cleanup Extraction: Multilaboratory Testing, Final Action 2016.02.

PubMed

Joseph, George; Devi, Ranjani; Marley, Elaine C; Leeman, David

2018-05-01

Single- and multilaboratory testing data have provided systematic scientific evidence that a simple, selective, accurate, and precise method can be used as a potential candidate reference method for dispute resolution in determining total biotin in all forms of infant, adult, and/or pediatric formula. Using LC coupled with immunoaffinity column cleanup extraction, the method fully meets the intended purpose and applicability statement in AOAC Standard Method Performance Requirement 2014.005. The method was applied to a cross-section of infant formula and adult nutritional matrixes, and acceptable precision and accuracy were established. The analytical platform is inexpensive, and the method can be used in almost any laboratory worldwide with basic facilities. The immunoaffinity column cleanup extraction is the key step to successful analysis.

From Catheter to Kidney Stone: The Uropathogenic Lifestyle of Proteus mirabilis.

PubMed

Norsworthy, Allison N; Pearson, Melanie M

2017-04-01

Proteus mirabilis is a model organism for urease-producing uropathogens. These diverse bacteria cause infection stones in the urinary tract and form crystalline biofilms on indwelling urinary catheters, frequently leading to polymicrobial infection. Recent work has elucidated how P. mirabilis causes all of these disease states. Particularly exciting is the discovery that this bacterium forms large clusters in the bladder lumen that are sites for stone formation. These clusters, and other steps of infection, require two virulence factors in particular: urease and MR/P fimbriae. Highlighting the importance of MR/P fimbriae is the cotranscribed regulator, MrpJ, which globally controls virulence. Overall, P. mirabilis exhibits an extraordinary lifestyle, and further probing will answer exciting basic microbiological and clinically relevant questions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Optical integrator for optical dark-soliton detection and pulse shaping.

PubMed

Ngo, Nam Quoc

2006-09-10

The design and analysis of an Nth-order optical integrator using the digital filter technique is presented. The optical integrator is synthesized using planar-waveguide technology. It is shown that a first-order optical integrator can be used as an optical dark-soliton detector by converting an optical dark-soliton pulse into an optical bell-shaped pulse for ease of detection. The optical integrators can generate an optical step function, staircase function, and paraboliclike functions from input optical Gaussian pulses. The optical integrators may be potentially used as basic building blocks of all-optical signal processing systems because the time integrals of signals may sometimes be required for further use or analysis. Furthermore, an optical integrator may be used for the shaping of optical pulses or in an optical feedback control system.

Medical application and clinical validation for reliable and trustworthy physiological monitoring using functional textiles: experience from the HeartCycle and MyHeart project.

PubMed

Reiter, Harald; Muehlsteff, Jens; Sipilä, Auli

2011-01-01

Functional textiles are seen as promising technology to enable healthcare services and medical care outside hospitals due to their ability to integrate textile-based sensing and monitoring technologies into the daily life. In the past much effort has been spent onto basic functional textile research already showing that reliable monitoring solutions can be realized. The challenge remains to find and develop suited medical application and to fulfil the boundary conditions for medical endorsement and exploitation. The HeartCycle vest described in this abstract will serve as an example for a functional textile carefully developed according to the requirements of a specific medical application, its clinical validation, the related certification aspects and the next improvement steps towards exploitation.

Constructing Tissue Microarrays: Protocols and Methods Considering Potential Advantages and Disadvantages for Downstream Use.

PubMed

Bingle, Lynne; Fonseca, Felipe P; Farthing, Paula M

2017-01-01

Tissue microarrays were first constructed in the 1980s but were used by only a limited number of researchers for a considerable period of time. In the last 10 years there has been a dramatic increase in the number of publications describing the successful use of tissue microarrays in studies aimed at discovering and validating biomarkers. This, along with the increased availability of both manual and automated microarray builders on the market, has encouraged even greater use of this novel and powerful tool. This chapter describes the basic techniques required to build a tissue microarray using a manual method in order that the theory behind the practical steps can be fully explained. Guidance is given to ensure potential disadvantages of the technique are fully considered.

Adult Dental Trauma: What Should the Dental Practitioner Know?

PubMed

Chauhan, Ravi; Rasaratnam, Lakshmi; Alani, Aws; Djemal, Serpil

2016-05-01

The management of adult dental trauma can be a daunting challenge for practitioners at any level. Like medical emergencies, initial management can have a large influence on prognosis. It is important that practitioners understand the basic principles of managing the acute presentations of dental trauma. This article aims to illustrate a step-by-step approach in order to improve the management within general dental practice for better outcomes for patients.

Improving Preschool Teachers Attitude towards the Persona Doll Approach and Determining the Effectiveness of Persona Doll Training Procedures

ERIC Educational Resources Information Center

Acar, Ebru Aktan; Çetin, Hilal

2017-01-01

The study features two basic steps. The first step of the research aims to develop a scale to measure the attitude of preschool teachers towards the Persona Dolls Approach and to verify its validity/reliability through a general survey. The cohort employed in the research was drawn from a pool of preschool teachers working in and around the cities…

Supercritical Fluid Spray Application Process for Adhesives and Primers

DTIC Science & Technology

2003-03-01

The basic scheme of SFE process consists of three steps. A solvent, typically carbon dioxide, first is heated and pressurized to a supercritical...passivation step to remove contaminants and to prevent recontamination. Bok et al. (25) describe a pressure pulsation mechanism to stimulate improved...in as a liquid, and then it is heated to above its critical temperature to become a supercritical fluid. The sample is injected and dissolved into

Commercialization of basic research from within the university and return of value to the public

PubMed Central

Hammerstedt, Roy H; Blach, Edward L

2008-01-01

The responsibility to return “value” to those who support basic research is an obligatory part of accepting funds to support the research. This reality should, but now does not, impact planning and execution of all basic research from its earliest stages. Universities are becoming ever more important in their role in the accelerating quest of a national goal of transition to a “knowledge based economy.” As such, the complex organizational format of a university, laden with entrenched procedures of questionable utility, should be adjusted to identify the means to commercialize the small subset of projects that appear suitable for further development. Of special concern is the growing tendency to encourage academic “innovators” to develop spin-out companies “on the side.” While seductive in perceived simplicity, this is a difficult step and we believe that most such individuals are ill-suited to these activities. Not because of technical ability but because of lack of relevant management experience. We attempt to address that situation through a brief listing of some reasons why people “do research” and outline phases (steps) in moving from concept to application, including an overview of start-up and funding early-stage spin-outs. A discussion of the limits to applying results of basic research to enhancing sperm fertility in commodity and companion animals and humans is provided. Hurdles are so daunting that there is concern as to why anyone would attempt to translate basic observations into practical solutions; which in turn raises the question of why funding agencies should fund basic studies in the first place. PMID:18164880

38 CFR 21.7042 - Basic eligibility requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (Montgomery GI Bill-Active Duty) Eligibility § 21.7042 Basic eligibility requirements. An individual must meet.... (1) The individual must after June 30, 1985, either— (i) First become a member of the Armed Forces... of that term found in § 21.7020(b)(1)(iv), and who wishes to become entitled to basic educational...

38 CFR 21.7042 - Basic eligibility requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (Montgomery GI Bill-Active Duty) Eligibility § 21.7042 Basic eligibility requirements. An individual must meet.... (1) The individual must after June 30, 1985, either— (i) First become a member of the Armed Forces... of that term found in § 21.7020(b)(1)(iv), and who wishes to become entitled to basic educational...

38 CFR 21.7042 - Basic eligibility requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (Montgomery GI Bill-Active Duty) Eligibility § 21.7042 Basic eligibility requirements. An individual must meet.... (1) The individual must after June 30, 1985, either— (i) First become a member of the Armed Forces... of that term found in § 21.7020(b)(1)(iv), and who wishes to become entitled to basic educational...

38 CFR 21.7042 - Basic eligibility requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (Montgomery GI Bill-Active Duty) Eligibility § 21.7042 Basic eligibility requirements. An individual must meet.... (1) The individual must after June 30, 1985, either— (i) First become a member of the Armed Forces... of that term found in § 21.7020(b)(1)(iv), and who wishes to become entitled to basic educational...

24 CFR 984.104 - Basic requirements of the FSS program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... URBAN DEVELOPMENT SECTION 8 AND PUBLIC HOUSING FAMILY SELF-SUFFICIENCY PROGRAM General § 984.104 Basic... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Basic requirements of the FSS program. 984.104 Section 984.104 Housing and Urban Development Regulations Relating to Housing and Urban...

25 CFR 36.97 - What basic requirements must a program's health services meet?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false What basic requirements must a program's health services meet? 36.97 Section 36.97 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

25 CFR 36.97 - What basic requirements must a program's health services meet?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false What basic requirements must a program's health services meet? 36.97 Section 36.97 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

25 CFR 36.97 - What basic requirements must a program's health services meet?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true What basic requirements must a program's health services meet? 36.97 Section 36.97 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

42 CFR 431.974 - Basic elements of Medicaid and CHIP eligibility reviews.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 4 2013-10-01 2013-10-01 false Basic elements of Medicaid and CHIP eligibility... ADMINISTRATION Requirements for Estimating Improper Payments in Medicaid and CHIP § 431.974 Basic elements of Medicaid and CHIP eligibility reviews. (a) General requirements. (1) States selected in any given year for...

42 CFR 431.974 - Basic elements of Medicaid and CHIP eligibility reviews.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 4 2012-10-01 2012-10-01 false Basic elements of Medicaid and CHIP eligibility... ADMINISTRATION Requirements for Estimating Improper Payments in Medicaid and CHIP § 431.974 Basic elements of Medicaid and CHIP eligibility reviews. (a) General requirements. (1) States selected in any given year for...

42 CFR 431.974 - Basic elements of Medicaid and CHIP eligibility reviews.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 4 2014-10-01 2014-10-01 false Basic elements of Medicaid and CHIP eligibility... ADMINISTRATION Requirements for Estimating Improper Payments in Medicaid and CHIP § 431.974 Basic elements of Medicaid and CHIP eligibility reviews. (a) General requirements. (1) States selected in any given year for...

The Disestablishment of U.S. Joint Forces Command: A Step Backward in Jointness

DTIC Science & Technology

2011-06-01

and the less than stellar 1983 rescue of a few medical students from the island of Grenada (Operation Urgent Fury), Congress passed the Goldwater...an opportunity for dialogue and a source of basic joint doctrine, it was widely ignored despite increasing tension and preparation for the Second... basic unity of effort appeared lacking even with dialogue like the Key West Agreements. Dr. William Niskanen, with the CATO Institute, described the

Implementing Performance Assessment in the Classroom.

ERIC Educational Resources Information Center

Brualdi, Amy

1999-01-01

Provides advice on implementing performance assessment in the classroom. Outlines the basic steps from defining the purpose of the assessment to giving the student feedback. Advice is also given about scoring rubrics. (SLD)

Parallel algorithms for boundary value problems

NASA Technical Reports Server (NTRS)

Lin, Avi

1990-01-01

A general approach to solve boundary value problems numerically in a parallel environment is discussed. The basic algorithm consists of two steps: the local step where all the P available processors work in parallel, and the global step where one processor solves a tridiagonal linear system of the order P. The main advantages of this approach are two fold. First, this suggested approach is very flexible, especially in the local step and thus the algorithm can be used with any number of processors and with any of the SIMD or MIMD machines. Secondly, the communication complexity is very small and thus can be used as easily with shared memory machines. Several examples for using this strategy are discussed.

GoldenBraid: An Iterative Cloning System for Standardized Assembly of Reusable Genetic Modules

PubMed Central

Sarrion-Perdigones, Alejandro; Falconi, Erica Elvira; Zandalinas, Sara I.; Juárez, Paloma; Fernández-del-Carmen, Asun; Granell, Antonio; Orzaez, Diego

2011-01-01

Synthetic Biology requires efficient and versatile DNA assembly systems to facilitate the building of new genetic modules/pathways from basic DNA parts in a standardized way. Here we present GoldenBraid (GB), a standardized assembly system based on type IIS restriction enzymes that allows the indefinite growth of reusable gene modules made of standardized DNA pieces. The GB system consists of a set of four destination plasmids (pDGBs) designed to incorporate multipartite assemblies made of standard DNA parts and to combine them binarily to build increasingly complex multigene constructs. The relative position of type IIS restriction sites inside pDGB vectors introduces a double loop (“braid”) topology in the cloning strategy that allows the indefinite growth of composite parts through the succession of iterative assembling steps, while the overall simplicity of the system is maintained. We propose the use of GoldenBraid as an assembly standard for Plant Synthetic Biology. For this purpose we have GB-adapted a set of binary plasmids for A. tumefaciens-mediated plant transformation. Fast GB-engineering of several multigene T-DNAs, including two alternative modules made of five reusable devices each, and comprising a total of 19 basic parts are also described. PMID:21750718

GoldenBraid: an iterative cloning system for standardized assembly of reusable genetic modules.

PubMed

Sarrion-Perdigones, Alejandro; Falconi, Erica Elvira; Zandalinas, Sara I; Juárez, Paloma; Fernández-del-Carmen, Asun; Granell, Antonio; Orzaez, Diego

2011-01-01

Synthetic Biology requires efficient and versatile DNA assembly systems to facilitate the building of new genetic modules/pathways from basic DNA parts in a standardized way. Here we present GoldenBraid (GB), a standardized assembly system based on type IIS restriction enzymes that allows the indefinite growth of reusable gene modules made of standardized DNA pieces. The GB system consists of a set of four destination plasmids (pDGBs) designed to incorporate multipartite assemblies made of standard DNA parts and to combine them binarily to build increasingly complex multigene constructs. The relative position of type IIS restriction sites inside pDGB vectors introduces a double loop ("braid") topology in the cloning strategy that allows the indefinite growth of composite parts through the succession of iterative assembling steps, while the overall simplicity of the system is maintained. We propose the use of GoldenBraid as an assembly standard for Plant Synthetic Biology. For this purpose we have GB-adapted a set of binary plasmids for A. tumefaciens-mediated plant transformation. Fast GB-engineering of several multigene T-DNAs, including two alternative modules made of five reusable devices each, and comprising a total of 19 basic parts are also described.

Human Movement Recognition Based on the Stochastic Characterisation of Acceleration Data

PubMed Central

Munoz-Organero, Mario; Lotfi, Ahmad

2016-01-01

Human activity recognition algorithms based on information obtained from wearable sensors are successfully applied in detecting many basic activities. Identified activities with time-stationary features are characterised inside a predefined temporal window by using different machine learning algorithms on extracted features from the measured data. Better accuracy, precision and recall levels could be achieved by combining the information from different sensors. However, detecting short and sporadic human movements, gestures and actions is still a challenging task. In this paper, a novel algorithm to detect human basic movements from wearable measured data is proposed and evaluated. The proposed algorithm is designed to minimise computational requirements while achieving acceptable accuracy levels based on characterising some particular points in the temporal series obtained from a single sensor. The underlying idea is that this algorithm would be implemented in the sensor device in order to pre-process the sensed data stream before sending the information to a central point combining the information from different sensors to improve accuracy levels. Intra- and inter-person validation is used for two particular cases: single step detection and fall detection and classification using a single tri-axial accelerometer. Relevant results for the above cases and pertinent conclusions are also presented. PMID:27618063

Robotic-assisted surgery in ophthalmology.

PubMed

de Smet, Marc D; Naus, Gerrit J L; Faridpooya, Koorosh; Mura, Marco

2018-05-01

Provide an overview of the current landscape of robotics in ophthalmology, including the pros and cons of system designs, the clinical development path, and the likely future direction of the field. Robots designed for eye surgery should meet certain basic requirements. Three designs are currently being developed: smart surgical tools such as the steady hand, comanipulation devices and telemanipulators using either a fixed or virtual remote center of motion. Successful human intraocular surgery is being performed using the Preceyes surgical system. Another telemanipulation robot, the da Vinci Surgical System, has been used to perform a pterygium repair in humans and was successful in ex-vivo corneal surgery despite its nonophthalmic design. Apart from Preceyes' BV research platform, none of the currently eye-specific systems has reached a commercial stage. Systems are likely to evolve from robotic assistance during specific procedural steps to semiautonomous surgery, as smart sensors are introduced to enhance the basic functionalities of robotic systems. Robotics is still in its infancy in ophthalmology but is rapidly reaching a stage wherein it will be introduced into everyday ophthalmic practice. It will most likely be introduced first for demanding vitreo-retinal procedures, followed by anterior segment applications.

Energy Data Management Manual for the Wastewater Treatment Sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lemar, Paul; De Fontaine, Andre

Energy efficiency has become a higher priority within the wastewater treatment sector, with facility operators and state and local governments ramping up efforts to reduce energy costs and improve environmental performance. Across the country, municipal wastewater treatment plants are estimated to consume more than 30 terawatt hours per year of electricity, which equates to about $2 billion in annual electric costs. Electricity alone can constitute 25% to 40% of a wastewater treatment plant’s annual operating budget and make up a significant portion of a given municipality’s total energy bill. These energy needs are expected to grow over time, driven bymore » population growth and increasingly stringent water quality requirements. The purpose of this document is to describe the benefits of energy data management, explain how it can help drive savings when linked to a strong energy management program, and provide clear, step-by-step guidance to wastewater treatment plants on how to appropriately track energy performance. It covers the basics of energy data management and related concepts and describes different options for key steps, recognizing that a single approach may not work for all agencies. Wherever possible, the document calls out simpler, less time-intensive approaches to help smaller plants with more limited resources measure and track energy performance. Reviews of key, publicly available energy-tracking tools are provided to help organizations select a tool that makes the most sense for them. Finally, this document describes additional steps wastewater treatment plant operators can take to build on their energy data management systems and further accelerate energy savings.« less

A major trauma course based on posters, audio-guides and simulation improves the management skills of medical students: Evaluation via medical simulator.

PubMed

Cuisinier, Adrien; Schilte, Clotilde; Declety, Philippe; Picard, Julien; Berger, Karine; Bouzat, Pierre; Falcon, Dominique; Bosson, Jean Luc; Payen, Jean-François; Albaladejo, Pierre

2015-12-01

Medical competence requires the acquisition of theoretical knowledge and technical skills. Severe trauma management teaching is poorly developed during internship. Nevertheless, the basics of major trauma management should be acquired by every future physician. For this reason, the major trauma course (MTC), an educational course in major traumatology, has been developed for medical students. Our objective was to evaluate, via a high fidelity medical simulator, the impact of the MTC on medical student skills concerning major trauma management. The MTC contains 3 teaching modalities: posters with associated audio-guides, a procedural workshop on airway management and a teaching session using a medical simulator. Skills evaluation was performed 1 month before (step 1) and 1 month after (step 3) the MTC (step 2). Nineteen students were individually evaluated on 2 different major trauma scenarios. The primary endpoint was the difference between steps 1 and 3, in a combined score evaluating: admission, equipment, monitoring and safety (skill set 1) and systematic clinical examinations (skill set 2). After the course, the combined primary outcome score improved by 47% (P<0.01). Scenario choice or the order of use had no significant influence on the skill set evaluations. This study shows improvement in student skills for major trauma management, which we attribute mainly to the major trauma course developed in our institution. Copyright © 2015 Société française d’anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

Structural requirements and reaction pathways in dimethyl ether combustion catalyzed by supported Pt clusters.

PubMed

Ishikawa, Akio; Neurock, Matthew; Iglesia, Enrique

2007-10-31

The identity and reversibility of the elementary steps required for catalytic combustion of dimethyl ether (DME) on Pt clusters were determined by combining isotopic and kinetic analyses with density functional theory estimates of reaction energies and activation barriers to probe the lowest energy paths. Reaction rates are limited by C-H bond activation in DME molecules adsorbed on surfaces of Pt clusters containing chemisorbed oxygen atoms at near-saturation coverages. Reaction energies and activation barriers for C-H bond activation in DME to form methoxymethyl and hydroxyl surface intermediates show that this step is more favorable than the activation of C-O bonds to form two methoxides, consistent with measured rates and kinetic isotope effects. This kinetic preference is driven by the greater stability of the CH3OCH2* and OH* intermediates relative to chemisorbed methoxides. Experimental activation barriers on Pt clusters agree with density functional theory (DFT)-derived barriers on oxygen-covered Pt(111). Measured DME turnover rates increased with increasing DME pressure, but decreased as the O2 pressure increased, because vacancies (*) on Pt surfaces nearly saturated with chemisorbed oxygen are required for DME chemisorption. DFT calculations show that although these surface vacancies are required, higher oxygen coverages lead to lower C-H activation barriers, because the basicity of oxygen adatoms increases with coverage and they become more effective in hydrogen abstraction from DME. Water inhibits reaction rates via quasi-equilibrated adsorption on vacancy sites, consistent with DFT results indicating that water binds more strongly than DME on vacancies. These conclusions are consistent with the measured kinetic response of combustion rates to DME, O2, and H2O, with H/D kinetic isotope effects, and with the absence of isotopic scrambling in reactants containing isotopic mixtures of 18O2-16O2 or 12CH3O12CH3-13CH3O13CH3. Turnover rates increased with Pt cluster size, because small clusters, with more coordinatively unsaturated surface atoms, bind oxygen atoms more strongly than larger clusters and exhibit lower steady-state vacancy concentrations and a consequently smaller number of adsorbed DME intermediates involved in kinetically relevant steps. These effects of cluster size and metal-oxygen bond energies on reactivity are ubiquitous in oxidation reactions requiring vacancies on surfaces nearly saturated with intermediates derived from O2.

Inverting the planning gradient: adjustment of grasps to late segments of multi-step object manipulations.

PubMed

Mathew, Hanna; Kunde, Wilfried; Herbort, Oliver

2017-05-01

When someone grasps an object, the grasp depends on the intended object manipulation and usually facilitates it. If several object manipulation steps are planned, the first step has been reported to primarily determine the grasp selection. We address whether the grasp can be aligned to the second step, if the second step's requirements exceed those of the first step. Participants grasped and rotated a dial first by a small extent and then by various extents in the opposite direction, without releasing the dial. On average, when the requirements of the first and the second step were similar, participants mostly aligned the grasp to the first step. When the requirements of the second step were considerably higher, participants aligned the grasp to the second step, even though the first step still had a considerable impact. Participants employed two different strategies. One subgroup initially aligned the grasp to the first step and then ceased adjusting the grasp to either step. Another group also initially aligned the grasp to the first step and then switched to aligning it primarily to the second step. The data suggest that participants are more likely to switch to the latter strategy when they experienced more awkward arm postures. In summary, grasp selections for multi-step object manipulations can be aligned to the second object manipulation step, if the requirements of this step clearly exceed those of the first step and if participants have some experience with the task.

STEP Experiment Requirements

NASA Technical Reports Server (NTRS)

Brumfield, M. L. (Compiler)

1984-01-01

A plan to develop a space technology experiments platform (STEP) was examined. NASA Langley Research Center held a STEP Experiment Requirements Workshop on June 29 and 30 and July 1, 1983, at which experiment proposers were invited to present more detailed information on their experiment concept and requirements. A feasibility and preliminary definition study was conducted and the preliminary definition of STEP capabilities and experiment concepts and expected requirements for support services are presented. The preliminary definition of STEP capabilities based on detailed review of potential experiment requirements is investigated. Topics discussed include: Shuttle on-orbit dynamics; effects of the space environment on damping materials; erectable beam experiment; technology for development of very large solar array deployers; thermal energy management process experiment; photovoltaic concentrater pointing dynamics and plasma interactions; vibration isolation technology; flight tests of a synthetic aperture radar antenna with use of STEP.

Food Safety: MedlinePlus Health Topic

MedlinePlus

... reached its expiration date. United States Department of Agriculture Start Here 4 Basic Steps to Food Safety ... Food Safety When Preparing Holiday Meals (Department of Agriculture, Food Safety and Inspection Service) - PDF Also in ...

Basic Airline Services to Improve Customer Satisfaction Act

THOMAS, 112th Congress

Sen. Landrieu, Mary L. [D-LA

2011-11-18

Senate - 11/18/2011 Read twice and referred to the Committee on Commerce, Science, and Transportation. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Preventing food poisoning

MedlinePlus

... US Food & Drug Administration. 4 basic steps to food safety at home. www.fda.gov/downloads/forconsumers/byaudience/ ... and the A.D.A.M. Editorial team. Food Safety Read more NIH MedlinePlus Magazine Read more Health ...

Assessment of turbulent models for scramjet flowfields

NASA Technical Reports Server (NTRS)

Sindir, M. M.; Harsha, P. T.

1982-01-01

The behavior of several turbulence models applied to the prediction of scramjet combustor flows is described. These models include the basic two equation model, the multiple dissipation length scale variant of the two equation model, and the algebraic stress model (ASM). Predictions were made of planar backward facing step flows and axisymmetric sudden expansion flows using each of these approaches. The formulation of each of these models are discussed, and the application of the different approaches to supersonic flows is described. A modified version of the ASM is found to provide the best prediction of the planar backward facing step flow in the region near the recirculation zone, while the basic ASM provides the best results downstream of the recirculation. Aspects of the interaction of numerica modeling and turbulences modeling as they affect the assessment of turbulence models are discussed.

Formation of C-C and C-O bonds and oxygen removal in reactions of alkanediols, alkanols, and alkanals on copper catalysts.

PubMed

Sad, María E; Neurock, Matthew; Iglesia, Enrique

2011-12-21

This study reports evidence for catalytic deoxygenation of alkanols, alkanals, and alkanediols on dispersed Cu clusters with minimal use of external H(2) and with the concurrent formation of new C-C and C-O bonds. These catalysts selectively remove O-atoms from these oxygenates as CO or CO(2) through decarbonylation or decarboxylation routes, respectively, that use C-atoms present within reactants or as H(2)O using H(2) added or formed in situ from CO/H(2)O mixtures via water-gas shift. Cu catalysts fully convert 1,3-propanediol to equilibrated propanol-propanal intermediates that subsequently form larger oxygenates via aldol-type condensation and esterification routes without detectable involvement of the oxide supports. Propanal-propanol-H(2) equilibration is mediated by their chemisorption and interconversion at surfaces via C-H and O-H activation and propoxide intermediates. The kinetic effects of H(2), propanal, and propanol pressures on turnover rates, taken together with measured selectivities and the established chemical events for base-catalyzed condensation and esterification reactions, indicate that both reactions involve kinetically relevant bimolecular steps in which propoxide species, acting as the base, abstract the α-hydrogen in adsorbed propanal (condensation) or attack the electrophilic C-atom at its carbonyl group (esterification). These weakly held basic alkoxides render Cu surfaces able to mediate C-C and C-O formation reactions typically catalyzed by basic sites inherent in the catalyst, instead of provided by coadsorbed organic moieties. Turnover rates for condensation and esterification reactions decrease with increasing Cu dispersion, because low-coordination corner and edge atoms prevalent on small clusters stabilize adsorbed intermediates and increase the activation barriers for the bimolecular kinetically relevant steps required for both reactions. © 2011 American Chemical Society

Structural insights into NHEJ: building up an integrated picture of the dynamic DSB repair super complex, one component and interaction at a time

PubMed Central

Williams, Gareth J.; Hammel, Michal; Radhakrishnan, Sarvan Kumar; Ramsden, Dale; Lees-Miller, Susan P.; Tainer, John A.

2014-01-01

Non-homologous end joining (NHEJ) is the major pathway for repair of DNA double-strand breaks (DSBs) in human cells. NHEJ is also needed for V(D)J recombination and the development of T and B cells in vertebrate immune systems, and acts in both the generation and prevention of non-homologous chromosomal translocations, a hallmark of genomic instability and many human cancers. X-ray crystal structures, cryo-electron microscopy envelopes, and small angle X-ray scattering (SAXS) solution conformations and assemblies are defining most of the core protein components for NHEJ: Ku70/Ku80 heterodimer; the DNA dependent protein kinase catalytic subunit (DNA-PKcs); the structure-specific endonuclease Artemis along with polynucleotide kinase/phosphatase (PNKP), aprataxin and PNKP related protein (APLF); the scaffolding proteins XRCC4 and XLF (XRCC4-like factor); DNA polymerases, and DNA ligase IV (Lig IV). The dynamic assembly of multi-protein NHEJ complexes at DSBs is regulated in part by protein phosphorylation. The basic steps of NHEJ have been biochemically defined to require: 1) DSB detection by the Ku heterodimer with subsequent DNA-PKcs tethering to form the DNA-PKcs-Ku-DNA complex (termed DNA-PK), 2) lesion processing, and 3) DNA end ligation by Lig IV, which functions in complex with XRCC4 and XLF. The current integration of structures by combined methods is resolving puzzles regarding the mechanisms, coordination and regulation of these three basic steps. Overall, structural results suggest the NHEJ system forms a flexing scaffold with the DNA-PKcs HEAT repeats acting as compressible macromolecular springs suitable to store and release conformational energy to apply forces to regulate NHEJ complexes and the DNA substrate for DNA end protection, processing, and ligation. PMID:24656613

Impact of modellers' decisions on hydrological a priori predictions

NASA Astrophysics Data System (ADS)

Holländer, H. M.; Bormann, H.; Blume, T.; Buytaert, W.; Chirico, G. B.; Exbrayat, J.-F.; Gustafsson, D.; Hölzel, H.; Krauße, T.; Kraft, P.; Stoll, S.; Blöschl, G.; Flühler, H.

2013-07-01

The purpose of this paper is to stimulate a re-thinking of how we, the catchment hydrologists, could become reliable forecasters. A group of catchment modellers predicted the hydrological response of a man-made 6 ha catchment in its initial phase (Chicken Creek) without having access to the observed records. They used conceptually different model families. Their modelling experience differed largely. The prediction exercise was organized in three steps: (1) for the 1st prediction modellers received a basic data set describing the internal structure of the catchment (somewhat more complete than usually available to a priori predictions in ungauged catchments). They did not obtain time series of stream flow, soil moisture or groundwater response. (2) Before the 2nd improved prediction they inspected the catchment on-site and attended a workshop where the modellers presented and discussed their first attempts. (3) For their improved 3rd prediction they were offered additional data by charging them pro forma with the costs for obtaining this additional information. Holländer et al. (2009) discussed the range of predictions obtained in step 1. Here, we detail the modeller's decisions in accounting for the various processes based on what they learned during the field visit (step 2) and add the final outcome of step 3 when the modellers made use of additional data. We document the prediction progress as well as the learning process resulting from the availability of added information. For the 2nd and 3rd step, the progress in prediction quality could be evaluated in relation to individual modelling experience and costs of added information. We learned (i) that soft information such as the modeller's system understanding is as important as the model itself (hard information), (ii) that the sequence of modelling steps matters (field visit, interactions between differently experienced experts, choice of model, selection of available data, and methods for parameter guessing), and (iii) that added process understanding can be as efficient as adding data for improving parameters needed to satisfy model requirements.

Inorganic and Protein Crystal Assembly in Solutions

NASA Technical Reports Server (NTRS)

Chernov, A. A.

2005-01-01

The basic kinetic and thermodynamic concepts of crystal growth will be revisited in view of recent AFM and interferometric findings. These concepts are as follows: 1) The Kossel crystal model that allows only one kink type on the crystal surface. The modern theory is developed overwhelmingly for the Kessel model; 2) Presumption that intensive step fluctuations maintain kink density sufficiently high to allow applicability of Gibbs-Thomson law; 3) Common experience that unlimited step bunching (morphological instability) during layer growth from solutions and supercooled melts always takes place if the step flow direction coincides with that of the fluid.

Dengue Virus Genome Uncoating Requires Ubiquitination.

PubMed

Byk, Laura A; Iglesias, Néstor G; De Maio, Federico A; Gebhard, Leopoldo G; Rossi, Mario; Gamarnik, Andrea V

2016-06-28

The process of genome release or uncoating after viral entry is one of the least-studied steps in the flavivirus life cycle. Flaviviruses are mainly arthropod-borne viruses, including emerging and reemerging pathogens such as dengue, Zika, and West Nile viruses. Currently, dengue virus is one of the most significant human viral pathogens transmitted by mosquitoes and is responsible for about 390 million infections every year around the world. Here, we examined for the first time molecular aspects of dengue virus genome uncoating. We followed the fate of the capsid protein and RNA genome early during infection and found that capsid is degraded after viral internalization by the host ubiquitin-proteasome system. However, proteasome activity and capsid degradation were not necessary to free the genome for initial viral translation. Unexpectedly, genome uncoating was blocked by inhibiting ubiquitination. Using different assays to bypass entry and evaluate the first rounds of viral translation, a narrow window of time during infection that requires ubiquitination but not proteasome activity was identified. In this regard, ubiquitin E1-activating enzyme inhibition was sufficient to stabilize the incoming viral genome in the cytoplasm of infected cells, causing its retention in either endosomes or nucleocapsids. Our data support a model in which dengue virus genome uncoating requires a nondegradative ubiquitination step, providing new insights into this crucial but understudied viral process. Dengue is the most significant arthropod-borne viral infection in humans. Although the number of cases increases every year, there are no approved therapeutics available for the treatment of dengue infection, and many basic aspects of the viral biology remain elusive. After entry, the viral membrane must fuse with the endosomal membrane to deliver the viral genome into the cytoplasm for translation and replication. A great deal of information has been obtained in the last decade regarding molecular aspects of the fusion step, but little is known about the events that follow this process, which leads to viral RNA release from the nucleocapsid. Here, we investigated the fate of nucleocapsid components (capsid protein and viral genome) during the infection process and found that capsid is degraded by the ubiquitin-proteasome system. However, in contrast to that observed for other RNA and DNA viruses, dengue virus capsid degradation was not responsible for genome uncoating. Interestingly, we found that dengue virus genome release requires a nondegradative ubiquitination step. These results provide the first insights into dengue virus uncoating and present new opportunities for antiviral intervention. Copyright © 2016 Byk et al.

Undergraduate basic science preparation for dental school.

PubMed

Humphrey, Sue P; Mathews, Robert E; Kaplan, Alan L; Beeman, Cynthia S

2002-11-01

In the Institute of Medicines report Dental Education at the Crossroads, it was suggested that dental schools across the country move toward integrated basic science education for dental and medical students in their curricula. To do so, dental school admission requirements and recommendations must be closely reviewed to ensure that students are adequately prepared for this coursework. The purpose of our study was twofold: 1) to identify student dentists' perceptions of their predental preparation as it relates to course content, and 2) to track student dentists' undergraduate basic science course preparation and relate that to DAT performance, basic science course performance in dental school, and Part I and Part II National Board performance. In the first part of the research, a total of ninety student dentists (forty-five from each class) from the entering classes of 1996 and 1997 were asked to respond to a survey. The survey instrument was distributed to each class of students after each completed the largest basic science class given in their second-year curriculum. The survey investigated the area of undergraduate major, a checklist of courses completed in their undergraduate preparation, the relevance of the undergraduate classes to the block basic science courses, and the strength of requiring or recommending the listed undergraduate courses as a part of admission to dental school. Results of the survey, using frequency analysis, indicate that students felt that the following classes should be required, not recommended, for admission to dental school: Microbiology 70 percent, Biochemistry 54.4 percent, Immunology 57.78 percent, Anatomy 50 percent, Physiology 58.89 percent, and Cell Biology 50 percent. The second part of the research involved anonymously tracking undergraduate basic science preparation of the same students with DAT scores, the grade received in a representative large basic science course, and Part I and Part II National Board performance. Using T-test analysis correlations, results indicate that having completed multiple undergraduate basic science courses (as reported by AADSAS BCP hours) did not significantly (p < .05) enhance student performance in any of these parameters. Based on these results, we conclude that student dentists with undergraduate preparation in science and nonscience majors can successfully negotiate the dental school curriculum, even though the students themselves would increase admission requirements to include more basic science courses than commonly required. Basically, the students' recommendations for required undergraduate basic science courses would replicate the standard basic science coursework found in most dental schools: anatomy, histology, biochemistry, microbiology, physiology, and immunology plus the universal foundation course of biology.

Evaluation of a newly developed media-supported 4-step approach for basic life support training

PubMed Central

2012-01-01

Objective The quality of external chest compressions (ECC) is of primary importance within basic life support (BLS). Recent guidelines delineate the so-called 4“-step approach” for teaching practical skills within resuscitation training guided by a certified instructor. The objective of this study was to evaluate whether a “media-supported 4-step approach” for BLS training leads to equal practical performance compared to the standard 4-step approach. Materials and methods After baseline testing, 220 laypersons were either trained using the widely accepted method for resuscitation training (4-step approach) or using a newly created “media-supported 4-step approach”, both of equal duration. In this approach, steps 1 and 2 were ensured via a standardised self-produced podcast, which included all of the information regarding the BLS algorithm and resuscitation skills. Participants were tested on manikins in the same mock cardiac arrest single-rescuer scenario prior to intervention, after one week and after six months with respect to ECC-performance, and participants were surveyed about the approach. Results Participants (age 23 ± 11, 69% female) reached comparable practical ECC performances in both groups, with no statistical difference. Even after six months, there was no difference detected in the quality of the initial assessment algorithm or delay concerning initiation of CPR. Overall, at least 99% of the intervention group (n = 99; mean 1.5 ± 0.8; 6-point Likert scale: 1 = completely agree, 6 = completely disagree) agreed that the video provided an adequate introduction to BLS skills. Conclusions The “media-supported 4-step approach” leads to comparable practical ECC-performance compared to standard teaching, even with respect to retention of skills. Therefore, this approach could be useful in special educational settings where, for example, instructors’ resources are sparse or large-group sessions have to be prepared. PMID:22647148

Climate change and forest trees in the Pacific Northwest: guide to vulnerability assessment methodology

Treesearch

W. Devine; C. Aubry; J. Miller; K. Potter; A. Bower

2012-01-01

This guide provides a step-by-step description of the methodology used to apply the Forest Tree Genetic Risk Assessment System (ForGRAS; Potter and Crane 2010) to the tree species of the Pacific Northwest in a recent climate change vulnerability assessment (Devine et al. 2012). We describe our modified version of the ForGRAS model, and we review the model’s basic...

One-pot, two-step synthesis of imidazo[1,2-a]benzimidazoles via a multicomponent [4 + 1] cycloaddition reaction.

PubMed

Hsiao, Ya-Shan; Narhe, Bharat D; Chang, Ying-Sheng; Sun, Chung-Ming

2013-10-14

A one-pot, two-step synthesis of imidazo[1,2-a]benzimidazoles has been achieved by a three-component reaction of 2-aminobenzimidazoles with an aromatic aldehyde and an isocyanide. The reaction involving condensation of 2-aminobenzimidazole with an aldehyde is run under microwave activation to generate an imine intermediate under basic conditions which then undergoes [4 + 1] cycloaddition with an isocyanide.

Basic Lessons in ORA and AutoMap 2011

DTIC Science & Technology

2011-06-13

A small legend also appears. Below is a screen capture showing the visualization of the agent x event graph from the Stargate Summit Meta-Network...4 The visualization displays the connections between all items in the Stargate Summit Meta-Network. The red circles represent the agents, the...It takes the examples I used for the Stargate dataset. 5 lessons - 201-207 A step by step run through of creating the Meta-Network from

Basic Lessons in *ORA and Automap 2009

DTIC Science & Technology

2009-06-01

screen capture showing the visualization of the agent x event graph from the Stargate Summit Meta-Network. The visualization displays the connections...for the Stargate dataset. 25.2 lessons - 201-207 A step by step run through of creating the Meta-Network from working with Excel, exporting data to...For the purpose of creating the Stargate MetaNetwork the two-episode story arc (Summit / Last Stand) was choosen as the basis for all the nodes

42 CFR 489.61 - Basic requirement for surety bonds.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Basic requirement for surety bonds. 489.61 Section 489.61 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION PROVIDER AGREEMENTS AND SUPPLIER APPROVAL Surety Bond Requirements...

42 CFR 489.61 - Basic requirement for surety bonds.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 5 2011-10-01 2011-10-01 false Basic requirement for surety bonds. 489.61 Section 489.61 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION PROVIDER AGREEMENTS AND SUPPLIER APPROVAL Surety Bond Requirements...

Testing the World with Simulations.

ERIC Educational Resources Information Center

Roberts, Nancy

1983-01-01

Explains the three main concepts of the system dynamics approach to model building (dynamics, feedback, and systems) and the basic steps to problem solving by simulation applicable to all educational levels. Some DYNAMO commands are briefly described. (EAO)

[Eight-step structured decision-making process to assign criminal responsibility and seven focal points for describing relationship between psychopathology and offense].

PubMed

Okada, Takayuki

2013-01-01

The author suggested that it is essential for lawyers and psychiatrists to have a common understanding of the mutual division of roles between them when determining criminal responsibility (CR) and, for this purpose, proposed an 8-step structured CR decision-making process. The 8 steps are: (1) gathering of information related to mental function and condition, (2) recognition of mental function and condition,(3) psychiatric diagnosis, (4) description of the relationship between psychiatric symptom or psychopathology and index offense, (5) focus on capacities of differentiation between right and wrong and behavioral control, (6) specification of elements of cognitive/volitional prong in legal context, (7) legal evaluation of degree of cognitive/volitional prong, and (8) final interpretation of CR as a legal conclusion. The author suggested that the CR decision-making process should proceed not in a step-like pattern from (1) to (2) to (3) to (8), but in a step-like pattern from (1) to (2) to (4) to (5) to (6) to (7) to (8), and that not steps after (5), which require the interpretation or the application of section 39 of the Penal Code, but Step (4), must be the core of psychiatric expert evidence. When explaining the relationship between the mental disorder and offense described in Step (4), the Seven Focal Points (7FP) are often used. The author urged basic precautions to prevent the misuse of 7FP, which are: (a) the priority of each item is not equal and the relative importance differs from case to case; (b) each item is not exclusively independent, there may be overlap between items; (c) the criminal responsibility shall not be judged because one item is applicable or because a number of items are applicable, i. e., 7FP are not "criteria," for example, the aim is not to decide such things as 'the motive is understandable' or 'the conduct is appropriate', but should be to describe how psychopathological factors affected the offense specifically in the context of understandability of motive or appropriateness of conduct; (d) it is essential to evaluate each item from a neutral point of view rather than only from one perspective, for example, looking at the case from the aspects of both comprehensibility and incomprehensibility of motive or from aspects of both oriented, purposeful, organized behavior and disoriented, purposeless, disorganized behavior during the offense; (e) depending on the case, there are some items that do not require any consideration (there are some cases in which there are less than seven items); (f) 7FP are not exhaustive and there are instances in which, depending on the case, there should be a focus on points that are not included in these.

Middle Cerebral Artery Occlusion Model of Stroke in Rodents: A Step-by-Step Approach

PubMed Central

Shahjouei, Shima; Cai, Peter Y.; Ansari, Saeed; Sharififar, Sharareh; Azari, Hassan; Ganji, Sarah; Zand, Ramin

2016-01-01

Stroke is one of the leading causes of morbidity and mortality in developed countries and an immense amount of medical care resources are devoted to combat the poststroke debilitating consequences. The key to develop effective and clinically applicable treatment methodologies is a better understanding of the pathophysiology of the disease, including the root causes and targets for pharmacology. Developing these foundations requires the use of standard animal models that mimic the physicochemical process of the diseases that can reliably replicate results in order to test and fine-tune therapeutic modalities. Middle cerebral artery occlusion (MCAO), endothelin-1-induced ischemic stroke, photothrombosis, devascularization, embolization, and spontaneous infarction using hemorrhage are some examples of different animal models. Reliability of MCAO has been proved and due to the ability to induce reperfusion similar to tissue plasminogen activator (tPA) therapy, this model is widely used in preclinical studies. Here, we describe a detailed methodology on how to develop MCAO stroke in rodents using intra-arterial insertion of filament to occlude the middle cerebral artery. This approach allows for the study of a wide array of basic pathophysiology mechanisms, regenerative medicine and rehabilitation therapy. PMID:26958146

Development of a TiAl Alloy by Spark Plasma Sintering

NASA Astrophysics Data System (ADS)

Couret, Alain; Voisin, Thomas; Thomas, Marc; Monchoux, Jean-Philippe

2017-12-01

Spark plasma sintering (SPS) is a consolidated powder metallurgy process for which the powder sintering is achieved through an applied electric current. The present article aims to describe the method we employed to develop a TiAl-based alloy adjusted for this SPS process. Owing to its enhanced mechanical properties, this alloy was found to fully match the industrial specifications for the aeronautic and automotive industries, which require a high strength at high temperature and a reasonably good ductility at room temperature. A step-by-step method was followed for this alloy development. Starting from a basic study on the as-SPSed GE alloy (Ti-48Al-2Cr-2Nb) in which the influence of the microstructure was studied, the microstructure-alloy composition relationships were then investigated to increase the mechanical properties. As a result of this study, we concluded that tungsten had to be the major alloying element to improve the resistance at high temperature and a careful addition of boron would serve the properties at room temperature. Thus, we developed the IRIS alloy (Ti-48Al-2W-0.08B). Its microstructure and mechanical properties are described here.

Novel drug discovery approaches for treating arenavirus infections.

PubMed

Pasquato, Antonella; Kunz, Stefan

2016-01-01

Arenaviruses are enveloped negative stranded viruses endemic in Africa, Europe and the Americas. Several arenaviruses cause severe viral hemorrhagic fever with high mortality in humans and pose serious public health threats. So far, there are no FDA-approved vaccines and therapeutic options are restricted to the off-label use of ribavirin. The major human pathogenic arenaviruses are classified as Category A agents and require biosafety level (BSL)-4 containment. Herein, the authors cover the recent progress in the development of BSL2 surrogate systems that recapitulate the entire or specific steps of the arenavirus life cycle and are serving as powerful platforms for drug discovery. Furthermore, they highlight the identification of selected novel drugs that target individual steps of arenavirus multiplication describing their discovery, their targets, and mode of action. The lack of effective drugs against arenaviruses is an unmatched challenge in current medical virology. Novel technologies have provided important insights into the basic biology of arenaviruses and the mechanisms underlying virus-host cell interaction. Significant progress of our understanding of how the virus invades the host cell paved the way to develop powerful novel screening platforms. Recent efforts have provided a range of promising drug candidates currently under evaluation for therapeutic intervention in vivo.

Standard operating procedures for priapism.

PubMed

Burnett, Arthur L; Sharlip, Ira D

2013-01-01

To provide standard operating procedures for the diagnosis and management of priapism. Review of the literature. Reduction of priapism and preservation of erectile function. Priapism is a persistent penile erection that continues hours beyond, or is unrelated to, sexual stimulation. Priapism requires prompt evaluation and usually requires emergency management. There are two types of priapism: (i) ischemic (veno-occlusive or low flow), which is found in 95% of cases, and (ii) nonischemic (arterial or high flow). Stuttering (intermittent) priapism is a recurrent form of ischemic priapism. To initiate appropriate management, the physician must determine whether the priapism is ischemic or nonischemic. Necessary diagnostic steps are an accurate history, physical examination, and cavernous blood gas analysis and/or color duplex ultrasonography of the corpora cavernosa. Management of ischemic priapism should achieve resolution as promptly as possible. Initial treatment is therapeutic aspiration with or without irrigation of the corpora. If this fails, intracavernous injection of sympathomimetic drugs is the next step. Surgical shunts should be performed if nonsurgical treatment has failed. The initial management of nonischemic priapism should be observation. Selective arterial embolization is recommended for the management of nonischemic priapism in patients who request treatment. The goal of management for a patient with recurrent (stuttering) priapism is prevention of future episodes. Management of priapism has become increasingly successful as scientific understanding of the pathophysiology and molecular biology of priapism improves. The key to further success in the treatment of priapism is basic research of this uncommon but potentially devastating condition. © 2012 International Society for Sexual Medicine.

Revision workshops in elementary mathematics enhance student performance in routine laboratory calculations.

PubMed

Sawbridge, Jenny L; Qureshi, Haseeb K; Boyd, Matthew J; Brown, Angus M

2014-09-01

The ability to understand and implement calculations required for molarity and dilution computations that are routinely undertaken in the laboratory are essential skills that should be possessed by all students entering an undergraduate Life Sciences degree. However, it is increasingly recognized that the majority of these students are ill equipped to reliably carry out such calculations. There are several factors that conspire against students' understanding of this topic, with the alien concept of the mole in relation to the mass of compounds and the engineering notation required when expressing the relatively small quantities typically involved being two key examples. In this report, we highlight teaching methods delivered via revision workshops to undergraduate Life Sciences students at the University of Nottingham. Workshops were designed to 1) expose student deficiencies in basic numeracy skills and remedy these deficiencies, 2) introduce molarity and dilution calculations and illustrate their workings in a step-by-step manner, and 3) allow students to appreciate the magnitude of numbers. Preworkshop to postworkshop comparisons demonstrated a considerable improvement in students' performance, which attenuated with time. The findings of our study suggest that an ability to carry out laboratory calculations cannot be assumed in students entering Life Sciences degrees in the United Kingdom but that explicit instruction in the form of workshops improves proficiency to a level of competence that allows students to prosper in the laboratory environment. Copyright © 2014 The American Physiological Society.

Using regression equations built from summary data in the psychological assessment of the individual case: extension to multiple regression.

PubMed

Crawford, John R; Garthwaite, Paul H; Denham, Annie K; Chelune, Gordon J

2012-12-01

Regression equations have many useful roles in psychological assessment. Moreover, there is a large reservoir of published data that could be used to build regression equations; these equations could then be employed to test a wide variety of hypotheses concerning the functioning of individual cases. This resource is currently underused because (a) not all psychologists are aware that regression equations can be built not only from raw data but also using only basic summary data for a sample, and (b) the computations involved are tedious and prone to error. In an attempt to overcome these barriers, Crawford and Garthwaite (2007) provided methods to build and apply simple linear regression models using summary statistics as data. In the present study, we extend this work to set out the steps required to build multiple regression models from sample summary statistics and the further steps required to compute the associated statistics for drawing inferences concerning an individual case. We also develop, describe, and make available a computer program that implements these methods. Although there are caveats associated with the use of the methods, these need to be balanced against pragmatic considerations and against the alternative of either entirely ignoring a pertinent data set or using it informally to provide a clinical "guesstimate." Upgraded versions of earlier programs for regression in the single case are also provided; these add the point and interval estimates of effect size developed in the present article.

76 FR 62416 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... grant'' PI and the basic grant is governed by the ``basic grant'' PI. Current PIs require separate... application and reporting processes by consolidating the PIs into one single PI and requiring one single... required responses and associated total burden hours for State courts. This new PI also describes...

Reducing the computational footprint for real-time BCPNN learning

PubMed Central

Vogginger, Bernhard; Schüffny, René; Lansner, Anders; Cederström, Love; Partzsch, Johannes; Höppner, Sebastian

2015-01-01

The implementation of synaptic plasticity in neural simulation or neuromorphic hardware is usually very resource-intensive, often requiring a compromise between efficiency and flexibility. A versatile, but computationally-expensive plasticity mechanism is provided by the Bayesian Confidence Propagation Neural Network (BCPNN) paradigm. Building upon Bayesian statistics, and having clear links to biological plasticity processes, the BCPNN learning rule has been applied in many fields, ranging from data classification, associative memory, reward-based learning, probabilistic inference to cortical attractor memory networks. In the spike-based version of this learning rule the pre-, postsynaptic and coincident activity is traced in three low-pass-filtering stages, requiring a total of eight state variables, whose dynamics are typically simulated with the fixed step size Euler method. We derive analytic solutions allowing an efficient event-driven implementation of this learning rule. Further speedup is achieved by first rewriting the model which reduces the number of basic arithmetic operations per update to one half, and second by using look-up tables for the frequently calculated exponential decay. Ultimately, in a typical use case, the simulation using our approach is more than one order of magnitude faster than with the fixed step size Euler method. Aiming for a small memory footprint per BCPNN synapse, we also evaluate the use of fixed-point numbers for the state variables, and assess the number of bits required to achieve same or better accuracy than with the conventional explicit Euler method. All of this will allow a real-time simulation of a reduced cortex model based on BCPNN in high performance computing. More important, with the analytic solution at hand and due to the reduced memory bandwidth, the learning rule can be efficiently implemented in dedicated or existing digital neuromorphic hardware. PMID:25657618

VirtualLeaf: an open-source framework for cell-based modeling of plant tissue growth and development.

PubMed

Merks, Roeland M H; Guravage, Michael; Inzé, Dirk; Beemster, Gerrit T S

2011-02-01

Plant organs, including leaves and roots, develop by means of a multilevel cross talk between gene regulation, patterned cell division and cell expansion, and tissue mechanics. The multilevel regulatory mechanisms complicate classic molecular genetics or functional genomics approaches to biological development, because these methodologies implicitly assume a direct relation between genes and traits at the level of the whole plant or organ. Instead, understanding gene function requires insight into the roles of gene products in regulatory networks, the conditions of gene expression, etc. This interplay is impossible to understand intuitively. Mathematical and computer modeling allows researchers to design new hypotheses and produce experimentally testable insights. However, the required mathematics and programming experience makes modeling poorly accessible to experimental biologists. Problem-solving environments provide biologically intuitive in silico objects ("cells", "regulation networks") required for setting up a simulation and present those to the user in terms of familiar, biological terminology. Here, we introduce the cell-based computer modeling framework VirtualLeaf for plant tissue morphogenesis. The current version defines a set of biologically intuitive C++ objects, including cells, cell walls, and diffusing and reacting chemicals, that provide useful abstractions for building biological simulations of developmental processes. We present a step-by-step introduction to building models with VirtualLeaf, providing basic example models of leaf venation and meristem development. VirtualLeaf-based models provide a means for plant researchers to analyze the function of developmental genes in the context of the biophysics of growth and patterning. VirtualLeaf is an ongoing open-source software project (http://virtualleaf.googlecode.com) that runs on Windows, Mac, and Linux.

Next Generation Sequence Analysis and Computational Genomics Using Graphical Pipeline Workflows

PubMed Central

Torri, Federica; Dinov, Ivo D.; Zamanyan, Alen; Hobel, Sam; Genco, Alex; Petrosyan, Petros; Clark, Andrew P.; Liu, Zhizhong; Eggert, Paul; Pierce, Jonathan; Knowles, James A.; Ames, Joseph; Kesselman, Carl; Toga, Arthur W.; Potkin, Steven G.; Vawter, Marquis P.; Macciardi, Fabio

2012-01-01

Whole-genome and exome sequencing have already proven to be essential and powerful methods to identify genes responsible for simple Mendelian inherited disorders. These methods can be applied to complex disorders as well, and have been adopted as one of the current mainstream approaches in population genetics. These achievements have been made possible by next generation sequencing (NGS) technologies, which require substantial bioinformatics resources to analyze the dense and complex sequence data. The huge analytical burden of data from genome sequencing might be seen as a bottleneck slowing the publication of NGS papers at this time, especially in psychiatric genetics. We review the existing methods for processing NGS data, to place into context the rationale for the design of a computational resource. We describe our method, the Graphical Pipeline for Computational Genomics (GPCG), to perform the computational steps required to analyze NGS data. The GPCG implements flexible workflows for basic sequence alignment, sequence data quality control, single nucleotide polymorphism analysis, copy number variant identification, annotation, and visualization of results. These workflows cover all the analytical steps required for NGS data, from processing the raw reads to variant calling and annotation. The current version of the pipeline is freely available at http://pipeline.loni.ucla.edu. These applications of NGS analysis may gain clinical utility in the near future (e.g., identifying miRNA signatures in diseases) when the bioinformatics approach is made feasible. Taken together, the annotation tools and strategies that have been developed to retrieve information and test hypotheses about the functional role of variants present in the human genome will help to pinpoint the genetic risk factors for psychiatric disorders. PMID:23139896

Reducing the computational footprint for real-time BCPNN learning.

PubMed

Vogginger, Bernhard; Schüffny, René; Lansner, Anders; Cederström, Love; Partzsch, Johannes; Höppner, Sebastian

2015-01-01

The implementation of synaptic plasticity in neural simulation or neuromorphic hardware is usually very resource-intensive, often requiring a compromise between efficiency and flexibility. A versatile, but computationally-expensive plasticity mechanism is provided by the Bayesian Confidence Propagation Neural Network (BCPNN) paradigm. Building upon Bayesian statistics, and having clear links to biological plasticity processes, the BCPNN learning rule has been applied in many fields, ranging from data classification, associative memory, reward-based learning, probabilistic inference to cortical attractor memory networks. In the spike-based version of this learning rule the pre-, postsynaptic and coincident activity is traced in three low-pass-filtering stages, requiring a total of eight state variables, whose dynamics are typically simulated with the fixed step size Euler method. We derive analytic solutions allowing an efficient event-driven implementation of this learning rule. Further speedup is achieved by first rewriting the model which reduces the number of basic arithmetic operations per update to one half, and second by using look-up tables for the frequently calculated exponential decay. Ultimately, in a typical use case, the simulation using our approach is more than one order of magnitude faster than with the fixed step size Euler method. Aiming for a small memory footprint per BCPNN synapse, we also evaluate the use of fixed-point numbers for the state variables, and assess the number of bits required to achieve same or better accuracy than with the conventional explicit Euler method. All of this will allow a real-time simulation of a reduced cortex model based on BCPNN in high performance computing. More important, with the analytic solution at hand and due to the reduced memory bandwidth, the learning rule can be efficiently implemented in dedicated or existing digital neuromorphic hardware.

Demonstration of sub-picometer length measurements and sub-nanoradian angular read-out in the millihertz-frequency range

NASA Astrophysics Data System (ADS)

Diekmann, Christian; Troebs, Michael; Steier, Frank; Bykov, Iouri; Heinzel, Gerhard; Danzmann, Karsten

The space-based interferometric gravitational-wave detector Laser Interferometer Space An-tenna (LISA) requires interferometry with subpicometer and nanoradian sensitivity in the fre-quency range between 3 mHz and 1 Hz. Currently, a first prototype of the optical bench for LISA is being designed. We report on a pre-experiment with the aim to demonstrate the required sensitivities and to thoroughly characterise the equipment. For this purpose, a quasi-monolithic optical setup has been built with two Mach-Zehnder interferometers (MZI) on an optical bench made of zerodur. In a first step the relative length change between these two MZI will be measured with a heterodyne modulation scheme in the kHz-range and the angle between two laser beams will be read out via quadrant photodiodes and a technique called differential wavefront sensing. These techniques have already been used for the LISA prede-cessor mission LISA Pathfinder and their sensitivity needs to be further improved to fulfill the requirements of the LISA mission. We describe the experiment and the characterization of the basic components. Measurements of the length and angular noise will be presented.

TARGET - TASK ANALYSIS REPORT GENERATION TOOL, VERSION 1.0

NASA Technical Reports Server (NTRS)

Ortiz, C. J.

1994-01-01

The Task Analysis Report Generation Tool, TARGET, is a graphical interface tool used to capture procedural knowledge and translate that knowledge into a hierarchical report. TARGET is based on VISTA, a knowledge acquisition tool developed by the Naval Systems Training Center. TARGET assists a programmer and/or task expert organize and understand the steps involved in accomplishing a task. The user can label individual steps in the task through a dialogue-box and get immediate graphical feedback for analysis. TARGET users can decompose tasks into basic action kernels or minimal steps to provide a clear picture of all basic actions needed to accomplish a job. This method allows the user to go back and critically examine the overall flow and makeup of the process. The user can switch between graphics (box flow diagrams) and text (task hierarchy) versions to more easily study the process being documented. As the practice of decomposition continues, tasks and their subtasks can be continually modified to more accurately reflect the user's procedures and rationale. This program is designed to help a programmer document an expert's task thus allowing the programmer to build an expert system which can help others perform the task. Flexibility is a key element of the system design and of the knowledge acquisition session. If the expert is not able to find time to work on the knowledge acquisition process with the program developer, the developer and subject matter expert may work in iterative sessions. TARGET is easy to use and is tailored to accommodate users ranging from the novice to the experienced expert systems builder. TARGET is written in C-language for IBM PC series and compatible computers running MS-DOS and Microsoft Windows version 3.0 or 3.1. No source code is supplied. The executable also requires 2Mb of RAM, a Microsoft compatible mouse, a VGA display and an 80286, 386 or 486 processor machine. The standard distribution medium for TARGET is one 5.25 inch 360K MS-DOS format diskette. TARGET was developed in 1991.

ALGORITHM FOR SORTING GROUPED DATA

NASA Technical Reports Server (NTRS)

Evans, J. D.

1994-01-01

It is often desirable to sort data sets in ascending or descending order. This becomes more difficult for grouped data, i.e., multiple sets of data, where each set of data involves several measurements or related elements. The sort becomes increasingly cumbersome when more than a few elements exist for each data set. In order to achieve an efficient sorting process, an algorithm has been devised in which the maximum most significant element is found, and then compared to each element in succession. The program was written to handle the daily temperature readings of the Voyager spacecraft, particularly those related to the special tracking requirements of Voyager 2. By reducing each data set to a single representative number, the sorting process becomes very easy. The first step in the process is to reduce the data set of width 'n' to a data set of width '1'. This is done by representing each data set by a polynomial of length 'n' based on the differences of the maximum and minimum elements. These single numbers are then sorted and converted back to obtain the original data sets. Required input data are the name of the data file to read and sort, and the starting and ending record numbers. The package includes a sample data file, containing 500 sets of data with 5 elements in each set. This program will perform a sort of the 500 data sets in 3 - 5 seconds on an IBM PC-AT with a hard disk; on a similarly equipped IBM PC-XT the time is under 10 seconds. This program is written in BASIC (specifically the Microsoft QuickBasic compiler) for interactive execution and has been implemented on the IBM PC computer series operating under PC-DOS with a central memory requirement of approximately 40K of 8 bit bytes. A hard disk is desirable for speed considerations, but is not required. This program was developed in 1986.

Semantic features of 'stepped' versus 'continuous' contours in German intonation.

PubMed

Dombrowski, Ernst

2013-01-01

This study analyses the meaning spaces of German pitch contours using two modes of melodic movement: continuous or in steps of sustained pitch. Both the continuous and stepped movements are represented by a set of five basic patterns, the latter being derived from the former. Thirty-six German native speakers judged the pattern sets on a 12-scale semantic differential. The semantic profiles confirm that stepped contours can be conceived of as stylized intonation, in a formal as well as in a functional sense. On the one hand, continuous (non-stylized) and stepped (stylized) contours are assigned different overall meanings (especially on the scales astonished - commonplace and interested - not interested). On the other hand, listeners organize the two contour sets in a similar fashion, which speaks in favour of parallel pattern inventories of continuous and stepped movement, respectively. However, the meaning space of the stylized patterns is affected by formal restrictions, for instance in the step transformation of continuous rises. © 2014 S. Karger AG, Basel.

Implementation of the WHO-6-step method in the medical curriculum to improve pharmacology knowledge and pharmacotherapy skills.

PubMed

Keijsers, Carolina J P W; Segers, Wieke S; de Wildt, Dick J; Brouwers, Jacobus R B J; Keijsers, Loes; Jansen, Paul A F

2015-06-01

The only validated tool for pharmacotherapy education for medical students is the 6-step method of the World Health Organization. It has proven effective in experimental studies with short term interventions. The generalizability of this effect after implementation in a contextual-rich medical curriculum was investigated. The pharmacology knowledge and pharmacotherapy skills of cohorts of students, from years before, during and after implementation of a WHO-6-step-based integrated learning programme were tested using a standardized assessment containing 50 items covering knowledge of basic (n = 25) and clinical (n = 24) pharmacology, and pharmacotherapy skills (n = 1 open question). All scores are expressed as a percentage of the maximum score possible per (sub)domain. In total, 1652 students were included between September 2010 and July 2014 (participation rate 89%). The WHO-6-step-based learning programme improved students' knowledge of basic pharmacology (mean score ± SD, 60.6 ± 10.5% vs. 63.4 ± 10.9%, P < 0.01) and clinical or applied pharmacology (63.7 ± 10.4% vs. 67.4 ± 10.3%, P < 0.01), and improved their pharmacotherapy skills (68.8 ± 26.1% vs. 74.6% ± 22.9%, P 0.02). Moreover, satisfaction with education increased (5.7 ± 1.3 vs. 6.3 ± 1.0 on a 10-point scale, P < 0.01) and as did students' confidence in daily practice (from -0.81 ± 0.72 to -0.50 ± 0.79 on a -2 to +2 scale, P < 0.01). The WHO-6-step method was successfully implemented in a medical curriculum. In this observational study, the integrated learning programme had positive effects on students' knowledge of basic and applied pharmacology, improved their pharmacotherapy skills, and increased satisfaction with education and self-confidence in prescribing. Whether this training method leads to better patient care remains to be established. © 2015 The British Pharmacological Society.

Guide to Developing an Environmental Management System - Act

EPA Pesticide Factsheets

This page takes you though the basic steps (Plan, Do, Check, Act) of building an Environmental Management System (EMS) as they are outlined in the 2001 Second Edition of Environmental Management Systems: An Implementation Guide. Act section.

Guide to Developing an Environmental Management System - Plan

EPA Pesticide Factsheets

This page takes you though the basic steps (Plan, Do, Check, Act) of building an Environmental Management System (EMS) as they are outlined in the 2001 Second Edition of Environmental Management Systems: An Implementation Guide. Plan section.

Systematic reviews in the field of nutrition

USDA-ARS?s Scientific Manuscript database

Systematic reviews are valuable tools for staying abreast of evolving nutrition and aging -related topics, formulating dietary guidelines, establishing nutrient reference intakes, formulating clinical practice guidance, evaluating health claims, and setting research agendas. Basic steps of conductin...

Guide to Developing an Environmental Management System - Check

EPA Pesticide Factsheets

This page takes you though the basic steps (Plan, Do, Check, Act) of building an Environmental Management System (EMS) as they are outlined in the 2001 Second Edition of Environmental Management Systems: An Implementation Guide. Check section.

Some Reflections on Strategic Planning in Public Libraries.

ERIC Educational Resources Information Center

Palmour, Vernon E.

1985-01-01

Presents the Public Library Association's planning model for strategic planning in public libraries. The development of the model is explained, the basic steps of the planning process are described, and improvements to the model are suggested. (CLB)

4 Basic Steps to Food Safety at Home

MedlinePlus

... F -Ground Beef, Pork, Lamb 160 °F -Turkey, Chicken, Duck 165 °F • Use a food thermometer to ... cause you to feel like you have the flu. Food illness can also cause serious health problems, ...

Regional Classification of Traditional Japanese Folk Songs

NASA Astrophysics Data System (ADS)

Kawase, Akihiro; Tokosumi, Akifumi

In this study, we focus on the melodies of Japanese folk songs, and examine the basic structures of Japanese folk songs that represent the characteristics of different regions. We sample the five largest song genres within the music corpora of the Nihon Min-yo Taikan (Anthology of Japanese Folk Songs), consisting of 202,246 tones from 1,794 song pieces from 45 prefectures in Japan. Then, we calculate the probabilities of 24 transition patterns that fill the interval of the perfect fourth pitch, which is the interval that maintains most of the frequency for one-step and two-step pitch transitions within 11 regions, in order to determine the parameters for cluster analysis. As a result, we successively classify the regions into two basic groups, eastern Japan and western Japan, which corresponds to geographical factors and cultural backgrounds, and also match accent distributions in the Japanese language.

Gaia DR2 documentation Chapter 3: Astrometry

NASA Astrophysics Data System (ADS)

Hobbs, D.; Lindegren, L.; Bastian, U.; Klioner, S.; Butkevich, A.; Stephenson, C.; Hernandez, J.; Lammers, U.; Bombrun, A.; Mignard, F.; Altmann, M.; Davidson, M.; de Bruijne, J. H. J.; Fernández-Hernández, J.; Siddiqui, H.; Utrilla Molina, E.

2018-04-01

This chapter of the Gaia DR2 documentation describes the models and processing steps used for the astrometric core solution, namely, the Astrometric Global Iterative Solution (AGIS). The inputs to this solution rely heavily on the basic observables (or astrometric elementaries) which have been pre-processed and discussed in Chapter 2, the results of which were published in Fabricius et al. (2016). The models consist of reference systems and time scales; assumed linear stellar motion and relativistic light deflection; in addition to fundamental constants and the transformation of coordinate systems. Higher level inputs such as: planetary and solar system ephemeris; Gaia tracking and orbit information; initial quasar catalogues and BAM data are all needed for the processing described here. The astrometric calibration models are outlined followed by the details processing steps which give AGIS its name. We also present a basic quality assessment and validation of the scientific results (for details, see Lindegren et al. 2018).

Steady-State Density Functional Theory for Finite Bias Conductances.

PubMed

Stefanucci, G; Kurth, S

2015-12-09

In the framework of density functional theory, a formalism to describe electronic transport in the steady state is proposed which uses the density on the junction and the steady current as basic variables. We prove that, in a finite window around zero bias, there is a one-to-one map between the basic variables and both local potential on as well as bias across the junction. The resulting Kohn-Sham system features two exchange-correlation (xc) potentials, a local xc potential, and an xc contribution to the bias. For weakly coupled junctions the xc potentials exhibit steps in the density-current plane which are shown to be crucial to describe the Coulomb blockade diamonds. At small currents these steps emerge as the equilibrium xc discontinuity bifurcates. The formalism is applied to a model benzene junction, finding perfect agreement with the orthodox theory of Coulomb blockade.

WaveNet: A Web-Based Metocean Data Access, Processing, and Analysis Tool. Part 3 - CDIP Database

DTIC Science & Technology

2014-06-01

and Analysis Tool; Part 3 – CDIP Database by Zeki Demirbilek, Lihwa Lin, and Derek Wilson PURPOSE: This Coastal and Hydraulics Engineering...Technical Note (CHETN) describes coupling of the Coastal Data Information Program ( CDIP ) database to WaveNet, the first module of MetOcnDat (Meteorological...provides a step-by-step procedure to access, process, and analyze wave and wind data from the CDIP database. BACKGROUND: WaveNet addresses a basic

Development of fire-resistant, low smoke generating, thermally stable end items for commercial aircraft and spacecraft using a basic polyimide resin

NASA Technical Reports Server (NTRS)

Gagliani, J.; Lee, R.; Sorathia, U. A.; Wilcoxson, A. L.

1980-01-01

A terpolyimide precursor was developed which can be foamed by microwave methods and yields foams possessing the best seating properties. A continuous process, based on spray drying techniques, permits production of polyimide powder precursors in large quantities. The constrained rise foaming process permits fabrication of rigid foam panels with improved mechanical properties and almost unlimited density characteristics. Polyimide foam core rigid panels were produced by this technique with woven fiberglass fabric bonded to each side of the panel in a one step microwave process. The fire resistance of polyimide foams was significantly improved by the addition of ceramic fibers to the powder precursors. Foams produced from these compositions are flexible, possess good acoustical attenuation and meet the minimum burnthrough requirements when impinged by high flux flame sources.

48 CFR 252.216-7010 - Requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Requirements. 252.216-7010... Clauses 252.216-7010 Requirements. As prescribed in 216.506(d), use one of the following clauses: Basic. As prescribed at 216.506(d)(1), use the following clause. Requirements—Basic (APR 2014) (a) This is a...

42 CFR 422.101 - Requirements relating to basic benefits.

Code of Federal Regulations, 2010 CFR

2010-10-01

... enrollees and health care providers. (c) MA organizations may elect to furnish, as part of their Medicare... covered services, and are also required to notify members and health care providers when the deductible... 42 Public Health 3 2010-10-01 2010-10-01 false Requirements relating to basic benefits. 422.101...

42 CFR 422.101 - Requirements relating to basic benefits.

Code of Federal Regulations, 2011 CFR

2011-10-01

... policy readily available, including through the Internet, to enrollees and health care providers. (c) MA... required to notify members and health care providers when the deductible (if any) or a limit has been... 42 Public Health 3 2011-10-01 2011-10-01 false Requirements relating to basic benefits. 422.101...

76 FR 78662 - Agency Recordkeeping/Reporting Requirements Under Emergency Review by the Office of Management...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-19

... Program Instructions (PIs). The training and data grants are governed by the ``new grant'' PI and the basic grant is governed by the ``basic grant'' PI. Current PIs require separate applications and program... and reporting processes by consolidating the PIs into one single PI and requiring one single...

Inhibition of calcium oxalate monohydrate growth by citrate and the effect of the background electrolyte

NASA Astrophysics Data System (ADS)

Weaver, Matthew L.; Qiu, S. Roger; Hoyer, John R.; Casey, William H.; Nancollas, George H.; De Yoreo, James J.

2007-08-01

Pathological mineralization is a common phenomenon in broad range of plants and animals. In humans, kidney stone formation is a well-known example that afflicts approximately 10% of the population. Of the various calcium salt phases that comprise human kidney stones, the primary component is calcium oxalate monohydrate (COM). Citrate, a naturally occurring molecule in the urinary system and a common therapeutic agent for treating stone disease, is a known inhibitor of COM. Understanding the physical mechanisms of citrate inhibition requires quantification of the effects of both background electrolytes and citrate on COM step kinetics. Here we report the results of an in situ AFM study of these effects, in which we measure the effect of the electrolytes LiCl, NaCl, KCl, RbCl, and CsCl, and the dependence of step speed on citrate concentration for a range of COM supersaturations. We find that varying the background electrolyte results in significant differences in the measured step speeds and in step morphology, with KCl clearly producing the smallest impact and NaCl the largest. The kinetic coefficient for the former is nearly three times larger than for the latter, while the steps change from smooth to highly serrated when KCl is changed to NaCl. The results on the dependence of step speed on citrate concentration show that citrate produces a dead zone whose width increases with citrate concentration as well as a continual reduction in kinetic coefficient with increasing citrate level. We relate these results to a molecular-scale view of inhibition that invokes a combination of kink blocking and step pinning. Furthermore, we demonstrate that the classic step-pinning model of Cabrera and Vermilyea (C-V model) does an excellent job of predicting the effect of citrate on COM step kinetics provided the model is reformulated to more realistically account for impurity adsorption, include an expression for the Gibbs-Thomson effect that is correct for all supersaturations, and take into account a reduction in kinetic coefficient through kink blocking. The detailed derivation of this reformulated C-V model is presented and the underlying materials parameters that control its impact are examined. Despite the fact that the basic C-V model was proposed nearly 50 years ago and has seen extensive theoretical treatment, this study represents the first quantitative and molecular scale experimental confirmation for any crystal system.

Simple webs of natural environment theme as a result of sharing in science teacher training

NASA Astrophysics Data System (ADS)

Tapilouw, M. C.; Firman, H.; Redjeki, S.; Chandra, D. T.

2018-03-01

Thematic learning is one type of integrated science (Biology, Physics, Chemistry and Earth Science) in Science Education. This study is concerning about simple webs of natural environment theme in science learning, as one of training material in science teacher training program. Making simple web is a goal of first step in teacher training program. Every group explain their web illustration to other group. Twenty Junior High School science teacher above one education foundation participate in science teacher training program. In order to gather simple webs, sharing method was used in this first step of science teacher training. The result of this study is five different simple web of natural environment themes. These webs represent science learning in class VII/Semester I, class VII/Semester II, Class VIII, Class IX/Semester I, Class IX/Semester II based on basic competency in National Curriculum 2013. Each group discussed web of natural environment theme based on their learning experience in real class which basic competency and subject matters are linked with natural environment theme. As a conclusion, simple webs are potential to develop in the next step of science teacher training program and to be implemented in real class.

Developing Cognitive Task Analysis-based Educational Videos for Basic Surgical Skills in Plastic Surgery.

PubMed

Yeung, Celine; McMillan, Catherine; Saun, Tomas J; Sun, Kimberly; D'hondt, Veerle; von Schroeder, Herbert P; Martou, Glykeria; Lee, Matthew; Liao, Elizabeth; Binhammer, Paul

To describe the development of cognitive task analysis (CTA)-based multimedia educational videos for surgical trainees in plastic surgery. A needs assessment survey was used to identify 5 plastic surgery skills on which to focus the educational videos. Three plastic surgeons were video-recorded performing each skill while describing the procedure, and were interviewed with probing questions. Three medical student reviewers coded transcripts and categorized each step into "action," "decision," or "assessment," and created a cognitive demands table (CDT) for each skill. The CDTs were combined into 1 table that was reviewed by the surgeons performing each skill to ensure accuracy. The final CDTs were compared against each surgeon's original transcripts. The total number of steps identified, percentage of steps shared, and the average percentage of steps omitted were calculated. Sunnybrook Health Sciences Centre, Toronto, Ontario, Canada, an urban tertiary care teaching center. Canadian junior plastic surgery residents (n = 78) were sent a needs assessment survey. Four plastic surgeons and 1 orthopedic surgeon performed the skills. Twenty-eight residents responded to the survey (36%). Subcuticular suturing, horizontal and vertical mattress suturing, hand splinting, digital nerve block, and excisional biopsy had the most number of residents (>80%) rank the skills as being skills that students should be able to perform before entering residency. The number of steps identified through CTA ranged from 12 to 29. Percentage of steps shared by all 3 surgeons for each skill ranged from 30% to 48%, while the average percentage of steps that were omitted by each surgeon ranged from 27% to 40%. Instructional videos for basic surgical skills may be generated using CTA to help experts provide comprehensive descriptions of a procedure. A CTA-based educational tool may give trainees access to a broader, objective body of knowledge, allowing them to learn decision-making processes before entering the operating room. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Basic GA Tools to Evaluate Your Web Area

EPA Pesticide Factsheets

Learn steps and tips for creating these Google Analytics (GA) reports, so you can learn which pages are popular or unpopular, which PDFs are getting looked at, who is using your pages, what search terms they used, and more.

Use of hyperbolic partial differential equations to generate body fitted coordinates

NASA Technical Reports Server (NTRS)

Steger, J. L.; Sorenson, R. L.

1980-01-01

The hyperbolic scheme is used to efficiently generate smoothly varying grids with good step size control near the body. Although only two dimensional applications are presented, the basic concepts are shown to extend to three dimensions.

Mergers and acquisitions: a most strategic decision.

PubMed

Laine, Mike; Tyler, David

2007-11-01

Five steps are basic to successfully concluding (or deciding not to conclude) a merger or acquisition: Identify targets. Begin with the end in mind. Choose a transaction team. Perform due diligence. Commit to the deal--or to no deal.

ASK ME--A Merit Promotion System

ERIC Educational Resources Information Center

Johnson, Michael L.; McCloskey, Kenneth R.

1978-01-01

Describes a procedure developed at the Red River Army Depot, Texarkana, Texas, for selecting and evaluating personnel called AKS ME (Ability, Skill and Knowledge Merit Evaluation), consisting of four basic steps: job analysis, examination plan, candidate evaluation, and validation. (MF)

Alternating electron and proton transfer steps in photosynthetic water oxidation

PubMed Central

Klauss, André; Haumann, Michael; Dau, Holger

2012-01-01

Water oxidation by cyanobacteria, algae, and plants is pivotal in oxygenic photosynthesis, the process that powers life on Earth, and is the paradigm for engineering solar fuel–production systems. Each complete reaction cycle of photosynthetic water oxidation requires the removal of four electrons and four protons from the catalytic site, a manganese–calcium complex and its protein environment in photosystem II. In time-resolved photothermal beam deflection experiments, we monitored apparent volume changes of the photosystem II protein associated with charge creation by light-induced electron transfer (contraction) and charge-compensating proton relocation (expansion). Two previously invisible proton removal steps were detected, thereby filling two gaps in the basic reaction-cycle model of photosynthetic water oxidation. In the S2 → S3 transition of the classical S-state cycle, an intermediate is formed by deprotonation clearly before electron transfer to the oxidant (). The rate-determining elementary step (τ, approximately 30 µs at 20 °C) in the long-distance proton relocation toward the protein–water interface is characterized by a high activation energy (Ea = 0.46 ± 0.05 eV) and strong H/D kinetic isotope effect (approximately 6). The characteristics of a proton transfer step during the S0 → S1 transition are similar (τ, approximately 100 µs; Ea = 0.34 ± 0.08 eV; kinetic isotope effect, approximately 3); however, the proton removal from the Mn complex proceeds after electron transfer to . By discovery of the transient formation of two further intermediate states in the reaction cycle of photosynthetic water oxidation, a temporal sequence of strictly alternating removal of electrons and protons from the catalytic site is established. PMID:22988080

Alternating electron and proton transfer steps in photosynthetic water oxidation.

PubMed

Klauss, André; Haumann, Michael; Dau, Holger

2012-10-02

Water oxidation by cyanobacteria, algae, and plants is pivotal in oxygenic photosynthesis, the process that powers life on Earth, and is the paradigm for engineering solar fuel-production systems. Each complete reaction cycle of photosynthetic water oxidation requires the removal of four electrons and four protons from the catalytic site, a manganese-calcium complex and its protein environment in photosystem II. In time-resolved photothermal beam deflection experiments, we monitored apparent volume changes of the photosystem II protein associated with charge creation by light-induced electron transfer (contraction) and charge-compensating proton relocation (expansion). Two previously invisible proton removal steps were detected, thereby filling two gaps in the basic reaction-cycle model of photosynthetic water oxidation. In the S(2) → S(3) transition of the classical S-state cycle, an intermediate is formed by deprotonation clearly before electron transfer to the oxidant (Y Z OX). The rate-determining elementary step (τ, approximately 30 µs at 20 °C) in the long-distance proton relocation toward the protein-water interface is characterized by a high activation energy (E(a) = 0.46 ± 0.05 eV) and strong H/D kinetic isotope effect (approximately 6). The characteristics of a proton transfer step during the S(0) → S(1) transition are similar (τ, approximately 100 µs; E(a) = 0.34 ± 0.08 eV; kinetic isotope effect, approximately 3); however, the proton removal from the Mn complex proceeds after electron transfer to . By discovery of the transient formation of two further intermediate states in the reaction cycle of photosynthetic water oxidation, a temporal sequence of strictly alternating removal of electrons and protons from the catalytic site is established.

Modular and Orthogonal Synthesis of Hybrid Polymers and Networks

PubMed Central

Liu, Shuang; Dicker, Kevin T.; Jia, Xinqiao

2015-01-01

Biomaterials scientists strive to develop polymeric materials with distinct chemical make-up, complex molecular architectures, robust mechanical properties and defined biological functions by drawing inspirations from biological systems. Salient features of biological designs include (1) repetitive presentation of basic motifs; and (2) efficient integration of diverse building blocks. Thus, an appealing approach to biomaterials synthesis is to combine synthetic and natural building blocks in a modular fashion employing novel chemical methods. Over the past decade, orthogonal chemistries have become powerful enabling tools for the modular synthesis of advanced biomaterials. These reactions require building blocks with complementary functionalities, occur under mild conditions in the presence of biological molecules and living cells and proceed with high yield and exceptional selectivity. These chemistries have facilitated the construction of complex polymers and networks in a step-growth fashion, allowing facile modulation of materials properties by simple variations of the building blocks. In this review, we first summarize features of several types of orthogonal chemistries. We then discuss recent progress in the synthesis of step growth linear polymers, dendrimers and networks that find application in drug delivery, 3D cell culture and tissue engineering. Overall, orthogonal reactions and modulular synthesis have not only minimized the steps needed for the desired chemical transformations but also maximized the diversity and functionality of the final products. The modular nature of the design, combined with the potential synergistic effect of the hybrid system, will likely result in novel hydrogel matrices with robust structures and defined functions. PMID:25572255

Performance of basic kinematic thresholds in the identification of crash and near-crash events within naturalistic driving data.

PubMed

Perez, Miguel A; Sudweeks, Jeremy D; Sears, Edie; Antin, Jonathan; Lee, Suzanne; Hankey, Jonathan M; Dingus, Thomas A

2017-06-01

Understanding causal factors for traffic safety-critical events (e.g., crashes and near-crashes) is an important step in reducing their frequency and severity. Naturalistic driving data offers unparalleled insight into these factors, but requires identification of situations where crashes are present within large volumes of data. Sensitivity and specificity of these identification approaches are key to minimizing the resources required to validate candidate crash events. This investigation used data from the Second Strategic Highway Research Program Naturalistic Driving Study (SHRP 2 NDS) and the Canada Naturalistic Driving Study (CNDS) to develop and validate different kinematic thresholds that can be used to detect crash events. Results indicate that the sensitivity of many of these approaches can be quite low, but can be improved by selecting particular threshold levels based on detection performance. Additional improvements in these approaches are possible, and may involve leveraging combinations of different detection approaches, including advanced statistical techniques and artificial intelligence approaches, additional parameter modifications, and automation of validation processes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Virus Particle Detection by Convolutional Neural Network in Transmission Electron Microscopy Images.

PubMed

Ito, Eisuke; Sato, Takaaki; Sano, Daisuke; Utagawa, Etsuko; Kato, Tsuyoshi

2018-06-01

A new computational method for the detection of virus particles in transmission electron microscopy (TEM) images is presented. Our approach is to use a convolutional neural network that transforms a TEM image to a probabilistic map that indicates where virus particles exist in the image. Our proposed approach automatically and simultaneously learns both discriminative features and classifier for virus particle detection by machine learning, in contrast to existing methods that are based on handcrafted features that yield many false positives and require several postprocessing steps. The detection performance of the proposed method was assessed against a dataset of TEM images containing feline calicivirus particles and compared with several existing detection methods, and the state-of-the-art performance of the developed method for detecting virus was demonstrated. Since our method is based on supervised learning that requires both the input images and their corresponding annotations, it is basically used for detection of already-known viruses. However, the method is highly flexible, and the convolutional networks can adapt themselves to any virus particles by learning automatically from an annotated dataset.

Cherenkov radiation conversion and collection considerations for a gamma bang time/reaction history diagnostic for the NIF.

PubMed

Herrmann, Hans W; Mack, Joseph M; Young, Carlton S; Malone, Robert M; Stoeffl, Wolfgang; Horsfield, Colin J

2008-10-01

Bang time and reaction history measurements are fundamental components of diagnosing inertial confinement fusion (ICF) implosions and will be essential contributors to diagnosing attempts at ignition on the National Ignition Facility (NIF). Fusion gammas provide a direct measure of fusion interaction rate without being compromised by Doppler spreading. Gamma-based gas Cherenkov detectors that convert fusion gamma rays to optical Cherenkov photons for collection by fast recording systems have been developed and fielded at Omega. These systems have established their usefulness in illuminating ICF physics in several experimental campaigns. Bang time precision better than 25 ps has been demonstrated, well below the 50 ps accuracy requirement defined by the NIF system design requirements. A comprehensive, validated numerical study of candidate systems is providing essential information needed to make a down selection based on optimization of sensitivity, bandwidth, dynamic range, cost, and NIF logistics. This paper presents basic design considerations arising from the two-step conversion process from gamma rays to relativistic electrons to UV/visible Cherenkov radiation.

Reliability of Long-Term Wave Conditions Predicted with Data Sets of Short Duration

DTIC Science & Technology

1985-03-01

the validity and reliability of predicted probable wave heights obtained from data of limited duration. BACKGROUND: The basic steps listed by...interest to perform the analysis outlined in steps 2 to 5, the prediction would only be reliable for up to a 3year return period. For a 5-year data set...for long-term hindcast data . The data retrieval and analysis program known as the Sea State Engineering Analysis System (SEAS) makes handling of the

Deferred discrimination algorithm (nibbling) for target filter management

NASA Astrophysics Data System (ADS)

Caulfield, H. John; Johnson, John L.

1999-07-01

A new method of classifying objects is presented. Rather than trying to form the classifier in one step or in one training algorithm, it is done in a series of small steps, or nibbles. This leads to an efficient and versatile system that is trained in series with single one-shot examples but applied in parallel, is implemented with single layer perceptrons, yet maintains its fully sequential hierarchical structure. Based on the nibbling algorithm, a basic new method of target reference filter management is described.

Combining cationic and anionic mixed-mode sorbents in a single cartridge to extract basic and acidic pharmaceuticals simultaneously from environmental waters.

PubMed

Salas, Daniela; Borrull, Francesc; Fontanals, Núria; Marcé, Rosa Maria

2018-01-01

The aim of the present study is to broaden the applications of mixed-mode ion-exchange solid-phase extraction sorbents to extract both basic and acidic compounds simultaneously by combining the sorbents in a single cartridge and developing a simplified extraction procedure. Four different cartridges containing negative and positive charges in the same configuration were evaluated and compared to extract a group of basic, neutral, and acidic pharmaceuticals selected as model compounds. After a thorough optimization of the extraction conditions, the four different cartridges showed to be capable of retaining basic and acidic pharmaceuticals simultaneously through ionic interactions, allowing the introduction of a washing step with 15 mL methanol to eliminate interferences retained by hydrophobic interactions. Using the best combined cartridge, a method was developed, validated, and further applied to environmental waters to demonstrate that the method is promising for the extraction of basic and acidic compounds from very complex samples.

To make participation in the American Community Survey voluntary, except with respect to certain basic questions.

THOMAS, 111th Congress

Rep. Poe, Ted [R-TX-2

2009-07-08

House - 10/23/2009 Referred to the Subcommittee on Information Policy, Census, and National Archives. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Basics of image analysis

USDA-ARS?s Scientific Manuscript database

Hyperspectral imaging technology has emerged as a powerful tool for quality and safety inspection of food and agricultural products and in precision agriculture over the past decade. Image analysis is a critical step in implementing hyperspectral imaging technology; it is aimed to improve the qualit...

Guide to Developing an Environmental Management System - Do

EPA Pesticide Factsheets

This page takes you though the basic steps (Plan, Do, Check, Act) of building an Environmental Management System (EMS) as they are outlined in the 2001 Second Edition of Environmental Management Systems: An Implementation Guide. This is the Do section.

Time Management and the Woman Library Manager.

ERIC Educational Resources Information Center

Gothberg, Helen M.

1987-01-01

Discusses how women library managers can use efficient time management techniques to help them make the best of both career and home work environments. Nine basic steps to greater efficiency are presented, and external and internal time wasters are listed. (EM)

Putting the Information back into Yearbook Graphics.

ERIC Educational Resources Information Center

Konkle, Bruce E.

1998-01-01

Outlines three steps to strengthen the use of information graphics ("infographics") in yearbooks. Discusses researching infographics, creativity in designing them, and their production. Offers several samples. Notes the five basic elements of an infographic package, and lists sources on them. (SR)

Hospitals will send an integrated nurse home with each discharge.

PubMed

Morrow, Thomas

2015-01-01

Hospitals must adapt to the rapidly changing environment of risk by changing the health behavior of their population. There is only one way to do this efficiently and at scale; send a nurse home with every patient at the time of discharge. That nurse can ensure adherence to medication and slowly, over time, transform personal behavior to evidence based levels ... basically taking their medication as prescribed, changing eating habits, increasing exercise, getting people to throw away their cigarettes, teaching them how to cope, improving their sleep and reducing their stress. But, this approach will require a nurse to basically "live" with the patient for prolonged periods of time, as bad health behaviors are quick to start but slow to change or end. The rapid developments in artificial intelligence and natural language understanding paired with cloud based computing and integrated with a variety of data sources has led to a new marketplace comprised of cognitive technologies that can emulate even the most creative, knowledgeable and effective nurse. Termed the Virtual Health Assistant, your patients can literally talk to these agents using normal conversational language. The possibility to send a nurse home with each patient to maintain adherence and prevent readmissions has arrived. The technology is available. Who will step forward to reap the rewards first?

Informatics in radiology (infoRAD): HTML and Web site design for the radiologist: a primer.

PubMed

Ryan, Anthony G; Louis, Luck J; Yee, William C

2005-01-01

A Web site has enormous potential as a medium for the radiologist to store, present, and share information in the form of text, images, and video clips. With a modest amount of tutoring and effort, designing a site can be as painless as preparing a Microsoft PowerPoint presentation. The site can then be used as a hub for the development of further offshoots (eg, Web-based tutorials, storage for a teaching library, publication of information about one's practice, and information gathering from a wide variety of sources). By learning the basics of hypertext markup language (HTML), the reader will be able to produce a simple and effective Web page that permits display of text, images, and multimedia files. The process of constructing a Web page can be divided into five steps: (a) creating a basic template with formatted text, (b) adding color, (c) importing images and multimedia files, (d) creating hyperlinks, and (e) uploading one's page to the Internet. This Web page may be used as the basis for a Web-based tutorial comprising text documents and image files already in one's possession. Finally, there are many commercially available packages for Web page design that require no knowledge of HTML.

Development of STEP-NC Adaptor for Advanced Web Manufacturing System

NASA Astrophysics Data System (ADS)

Ajay Konapala, Mr.; Koona, Ramji, Dr.

2017-08-01

Information systems play a key role in the modern era of Information Technology. Rapid developments in IT & global competition calls for many changes in basic CAD/CAM/CAPP/CNC manufacturing chain of operations. ‘STEP-NC’ an enhancement to STEP for operating CNC machines, creating new opportunities for collaborative, concurrent, adaptive works across the manufacturing chain of operations. Schemas and data models defined by ISO14649 in liaison with ISO10303 standards made STEP-NC file rich with feature based, rather than mere point to point information of G/M Code format. But one needs to have a suitable information system to understand and modify these files. Various STEP-NC information systems are reviewed to understand the suitability of STEP-NC for web manufacturing. Present work also deals with the development of an adaptor which imports STEP-NC file, organizes its information, allowing modifications to entity values and finally generates a new STEP-NC file to export. The system is designed and developed to work on web to avail additional benefits through the web and also to be part of a proposed ‘Web based STEP-NC manufacturing platform’ which is under development and explained as future scope.

49 CFR 236.923 - Task analysis and basic requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... classroom, simulator, computer-based, hands-on, or other formally structured training and testing, except... for Processor-Based Signal and Train Control Systems § 236.923 Task analysis and basic requirements...) Based on a formal task analysis, identify the installation, maintenance, repair, modification...

49 CFR 236.1043 - Task analysis and basic requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1043 Task analysis and basic requirements. (a) Training structure and... installation, maintenance, repair, modification, inspection, testing, and operating tasks that must be...

49 CFR 236.1043 - Task analysis and basic requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1043 Task analysis and basic requirements. (a) Training structure and... installation, maintenance, repair, modification, inspection, testing, and operating tasks that must be...

49 CFR 236.1043 - Task analysis and basic requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1043 Task analysis and basic requirements. (a) Training structure and... installation, maintenance, repair, modification, inspection, testing, and operating tasks that must be...

49 CFR 236.1043 - Task analysis and basic requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1043 Task analysis and basic requirements. (a) Training structure and... installation, maintenance, repair, modification, inspection, testing, and operating tasks that must be...

49 CFR 236.1043 - Task analysis and basic requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1043 Task analysis and basic requirements. (a) Training structure and... installation, maintenance, repair, modification, inspection, testing, and operating tasks that must be...

Coordination for the Improvement of Basic Skills.

ERIC Educational Resources Information Center

Roberts, Jane M. E.

The Title II Basic Skills legislation, which is part of the Educational Amendments of 1978, requires coordination of basic skills improvement among related federally-supported programs. Coordination, while essential, is made difficult by the proliferation of agencies and bureaus concerned with basic skills and by the need for autonomy among…

HMPT: Basic Radioactive Material Transportation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hypes, Philip A.

2016-02-29

Hazardous Materials and Packaging and Transportation (HMPT): Basic Radioactive Material Transportation Live (#30462, suggested one time) and Test (#30463, required initially and every 36 months) address the Department of Transportation’s (DOT’s) function-specific [required for hazardous material (HAZMAT) handlers, packagers, and shippers] training requirements of the HMPT Los Alamos National Laboratory (LANL) Labwide training. This course meets the requirements of 49 CFR 172, Subpart H, Section 172.704(a)(ii), Function-Specific Training.

MatMRI and MatHIFU: software toolboxes for real-time monitoring and control of MR-guided HIFU

PubMed Central

2013-01-01

Background The availability of open and versatile software tools is a key feature to facilitate pre-clinical research for magnetic resonance imaging (MRI) and magnetic resonance-guided high-intensity focused ultrasound (MR-HIFU) and expedite clinical translation of diagnostic and therapeutic medical applications. In the present study, two customizable software tools that were developed at the Thunder Bay Regional Research Institute are presented for use with both MRI and MR-HIFU. Both tools operate in a MATLAB®; environment. The first tool is named MatMRI and enables real-time, dynamic acquisition of MR images with a Philips MRI scanner. The second tool is named MatHIFU and enables the execution and dynamic modification of user-defined treatment protocols with the Philips Sonalleve MR-HIFU therapy system to perform ultrasound exposures in MR-HIFU therapy applications. Methods MatMRI requires four basic steps: initiate communication, subscribe to MRI data, query for new images, and unsubscribe. MatMRI can also pause/resume the imaging and perform real-time updates of the location and orientation of images. MatHIFU requires four basic steps: initiate communication, prepare treatment protocol, and execute treatment protocol. MatHIFU can monitor the state of execution and, if required, modify the protocol in real time. Results Four applications were developed to showcase the capabilities of MatMRI and MatHIFU to perform pre-clinical research. Firstly, MatMRI was integrated with an existing small animal MR-HIFU system (FUS Instruments, Toronto, Ontario, Canada) to provide real-time temperature measurements. Secondly, MatMRI was used to perform T2-based MR thermometry in the bone marrow. Thirdly, MatHIFU was used to automate acoustic hydrophone measurements on a per-element basis of the 256-element transducer of the Sonalleve system. Finally, MatMRI and MatHIFU were combined to produce and image a heating pattern that recreates the word ‘HIFU’ in a tissue-mimicking heating phantom. Conclusions MatMRI and MatHIFU leverage existing MRI and MR-HIFU clinical platforms to facilitate pre-clinical research. MatMRI substantially simplifies the real-time acquisition and processing of MR data. MatHIFU facilitates the testing and characterization of new therapy applications using the Philips Sonalleve clinical MR-HIFU system. Under coordination with Philips Healthcare, both MatMRI and MatHIFU are intended to be freely available as open-source software packages to other research groups. PMID:25512856

A nonstandard finite difference scheme for a basic model of cellular immune response to viral infection

NASA Astrophysics Data System (ADS)

Korpusik, Adam

2017-02-01

We present a nonstandard finite difference scheme for a basic model of cellular immune response to viral infection. The main advantage of this approach is that it preserves the essential qualitative features of the original continuous model (non-negativity and boundedness of the solution, equilibria and their stability conditions), while being easy to implement. All of the qualitative features are preserved independently of the chosen step-size. Numerical simulations of our approach and comparison with other conventional simulation methods are presented.

Research in the perianesthesia setting: the basics of getting started.

PubMed

Myers, Gina; Kosinski, Michele

2005-02-01

Research can be defined as a process that systematically investigates a situation with the objective of expanding the existing knowledge of a profession. Research asks the question "Does what we do as nurses help or hinder?" The purpose of this article is to provide a brief history of nursing research and to review basic research methods. In addition, examples of potential research projects focused in the perianesthesia practice arena will be explored. Practical steps will be outlined to guide novice nurse researchers in their early endeavors.

42 CFR 405.2402 - Basic requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Basic requirements. 405.2402 Section 405.2402 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE PROGRAM FEDERAL HEALTH INSURANCE FOR THE AGED AND DISABLED Rural Health Clinic and Federally Qualified...

42 CFR 405.2430 - Basic requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Basic requirements. 405.2430 Section 405.2430 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE PROGRAM FEDERAL HEALTH INSURANCE FOR THE AGED AND DISABLED Rural Health Clinic and Federally Qualified...

Hazardous Waste: Learn the Basics of Hazardous Waste

MedlinePlus

... to set up a framework for the proper management of hazardous waste. Need More Information on Hazardous Waste? The RCRA Orientation Manual provides ... facility management standards, specific provisions governing hazardous waste management units ... information on the final steps in EPA’s hazardous waste ...

A guide to forestry investment analysis.

Treesearch

Dietmar W. Rose; Charles R. Blinn; Gary J. Brand

1988-01-01

It is often necessary to choose between several forestry projects. This paper provides the background needed to evaluate projects from a financial perspective. The basic steps for preparing a project analysis, suggestions for dealing with uncertainty, and techniques for monitoring a projects are presented.

The Human Genome Initiative: First Steps.

ERIC Educational Resources Information Center

Newman, Alan R.

1990-01-01

Described is the basic biology involved in mapping chromosomes as presented at a symposium at a recent meeting of the American Chemical Association which focused on the Human Genome Initiative. Different types of gene maps and techniques used to produce gene maps are discussed. (CW)

Fundamentals of Petroleum.

ERIC Educational Resources Information Center

Bureau of Naval Personnel, Washington, DC.

Basic information on petroleum is presented in this book prepared for naval logistics officers. Petroleum in national defense is discussed in connection with consumption statistics, productive capacity, world's resources, and steps in logistics. Chemical and geological analyses are made in efforts to familiarize methods of refining, measuring,…

Life Cycle Impact Assessment (videotape)

EPA Science Inventory

Originally developed for the US EPA Regions, this presentation is available to the general public via the internet. The presentation focuses on the basics of Life Cycle Impact Assessment (LCIA) including the ISO 14040 series framework and a quick overview of each of the steps wi...

Strategic Information Systems Planning.

ERIC Educational Resources Information Center

Rowley, Jennifer

1995-01-01

Strategic Information Systems Planning (SISP) is the process of establishing a program for implementation and use of information systems in ways that will optimize effectiveness of information resources and use them to support the objectives of the organization. Basic steps in SISP methodology are outlined. (JKP)

Zero-Based Budgeting.

ERIC Educational Resources Information Center

Wichowski, Chester

1979-01-01

The zero-based budgeting approach is designed to achieve the greatest benefit with the fewest undesirable consequences. Seven basic steps make up the zero-based decision-making process: (1) identifying program goals, (2) classifying goals, (3) identifying resources, (4) reviewing consequences, (5) developing decision packages, (6) implementing a…

Intensive Care, Intense Conflict: A Balanced Approach.

PubMed

Paquette, Erin Talati; Kolaitis, Irini N

2015-01-01

Caring for a child in a pediatric intensive care unit is emotionally and physically challenging and often leads to conflict. Skilled mediators may not always be available to aid in conflict resolution. Careproviders at all levels of training are responsible for managing difficult conversations with families and can often prevent escalation of conflict. Bioethics mediators have acknowledged the important contribution of mediation training in improving clinicians' skills in conflict management. Familiarizing careproviders with basic mediation techniques is an important step towards preventing escalation of conflict. While training in effective communication is crucial, a sense of fairness and justice that may only come with the introduction of a skilled, neutral third party is equally important. For intense conflict, we advocate for early recognition, comfort, and preparedness through training of clinicians in de-escalation and optimal communication, along with the use of more formally trained third-party mediators, as required. Copyright 2015 The Journal of Clinical Ethics. All rights reserved.

A near-optimum procedure for selecting stations in a streamgaging network

USGS Publications Warehouse

Lanfear, Kenneth J.

2005-01-01

Two questions are fundamental to Federal government goals for a network of streamgages which are operated by the U.S. Geological Survey: (1) how well does the present network of streamagaging stations meet defined Federal goals and (2) what is the optimum set of stations to add or reactivate to support remaining goals? The solution involves an incremental-stepping procedure that is based on Basic Feasible Incremental Solutions (BFIS?s) where each BFIS satisfies at least one Federal streamgaging goal. A set of minimum Federal goals for streamgaging is defined to include water measurements for legal compacts and decrees, flooding, water budgets, regionalization of streamflow characteristics, and water quality. Fully satisfying all these goals by using the assumptions outlined in this paper would require adding 887 new streamgaging stations to the U.S. Geological Survey network and reactivating an additional 857 stations that are currently inactive.

Recommendations for Preoperative Management of Frailty from the Society for Perioperative Assessment and Quality Improvement (SPAQI).

PubMed

Alvarez-Nebreda, Maria Loreto; Bentov, Nathalie; Urman, Richard D; Setia, Sabeena; Huang, Joe Chin-Sun; Pfeifer, Kurt; Bennett, Katherine; Ong, Thuan D; Richman, Deborah; Gollapudi, Divya; Alec Rooke, G; Javedan, Houman

2018-06-01

Frailty is an age-related, multi-dimensional state of decreased physiologic reserve that results in diminished resiliency and increased vulnerability to stressors. It has proven to be an excellent predictor of unfavorable health outcomes in the older surgical population. There is agreement in recommending that a frailty evaluation should be part of the preoperative assessment in the elderly. However, the consensus is still building with regards to how it should affect perioperative care. The Society for Perioperative Assessment and Quality Improvement (SPAQI) convened experts in the fields of gerontology, anesthesiology and preoperative assessment to outline practical steps for clinicians to assess and address frailty in elderly patients who require elective intermediate or high risk surgery. These recommendations summarize evidence-based principles of measuring and screening for frailty, as well as basic interventions that can help improve patient outcomes. Copyright © 2018 Elsevier Inc. All rights reserved.

[Methods of bonding to the enamel in orthodontics].

PubMed

Mano, Marie-Charlotte; Mehdi, Sarah

2009-06-01

Mastery of the bonding stage of treatment is clearly a critical step in the clinical practice of orthodontics. There is such a wide variety of products available in orthodontics that a reasoned assessment of bonding systems is a practical necessity. Composite plastics, associated with hydrophobic or hydro-compatible adhesive systems, and the CVIMAR represent the two principal types of bonding agents used in dentistry. They are categorized according to their constituents into a wide range of products whose nuanced differences are sometimes difficult to discern. This paper first focuses on the development of the composition of the various materials, a depiction of the fundamental parameters of adhesion, and a detailed terminology to help the reader reach a basic understanding. Bonding systems are designed to fulfill the requirements of specific clinical situations. A description of their modes of adhesion, of their composition, and of their advantages and disadvantages will be presented in the second part of this article.

Protein prenylation: a new mode of host-pathogen interaction.

PubMed

Amaya, Moushimi; Baranova, Ancha; van Hoek, Monique L

2011-12-09

Post translational modifications are required for proteins to be fully functional. The three step process, prenylation, leads to farnesylation or geranylgeranylation, which increase the hydrophobicity of the prenylated protein for efficient anchoring into plasma membranes and/or organellar membranes. Prenylated proteins function in a number of signaling and regulatory pathways that are responsible for basic cell operations. Well characterized prenylated proteins include Ras, Rac and Rho. Recently, pathogenic prokaryotic proteins, such as SifA and AnkB, have been shown to be prenylated by eukaryotic host cell machinery, but their functions remain elusive. The identification of other bacterial proteins undergoing this type of host-directed post-translational modification shows promise in elucidating host-pathogen interactions to develop new therapeutics. This review incorporates new advances in the study of protein prenylation into a broader aspect of biology with a focus on host-pathogen interaction. Copyright © 2011 Elsevier Inc. All rights reserved.

Description of bipolar charge transport in polyethylene using a fluid model with a constant mobility: model prediction

NASA Astrophysics Data System (ADS)

LeRoy, S.; Segur, P.; Teyssedre, G.; Laurent, C.

2004-01-01

We present a conduction model aimed at describing bipolar transport and space charge phenomena in low density polyethylene under dc stress. In the first part we recall the basic requirements for the description of charge transport and charge storage in disordered media with emphasis on the case of polyethylene. A quick review of available conduction models is presented and our approach is compared with these models. Then, the bases of the model are described and related assumptions are discussed. Finally, results on external current, trapped and free space charge distributions, field distribution and recombination rate are presented and discussed, considering a constant dc voltage, a step-increase of the voltage, and a polarization-depolarization protocol for the applied voltage. It is shown that the model is able to describe the general features reported for external current, electroluminescence and charge distribution in polyethylene.

Finding common ground by unifying autonomy indices to understand needed capabilities

NASA Astrophysics Data System (ADS)

Bihl, Trevor; Cox, Chadwick; Jenkins, Todd

2018-05-01

Autonomous machines promise to reduce the workload of human operators by replacing some or all cognitive functions with intelligent software. However, development is retarded by disagreement among researchers at very basic levels, including what is meant by autonomy and how to achieve it. Clear definitions are few and no one has successfully bridged the gap between philosophical notions and engineering methods. A variety of autonomy measures are reviewed, highlighting their strengths and weaknesses. Various researchers have developed these autonomy measures to facilitate discussions of capabilities. These measures are also a means of comparing and contrasting autonomy approaches. We contend that any properly structured set of measures are not only useful for these functions, but it provides both a philosophical and practical justification, it outlines developmental steps, it suggests schematic constraints, and it implies requirements for tests. As such, we make recommendations for the further developments of autonomy measures.

Normalization of hydrocarbon emissions in Germany

NASA Astrophysics Data System (ADS)

Levitin, R. E.

2018-05-01

In connection with the integration of the Russian Federation into the European space, many technical regulations and methodologies are being corrected. The work deals with the German legislation in the field of determining of hydrocarbon emissions and the methodology for determining the emissions of oil products from vertical steel tanks. In German law, the Emission Protection Act establishes only basic requirements. Mainly technical details, which have importance for practice, are regulated in numerous Orders on the Procedure for the Implementation of the Law (German abbr. - BimSchV). Documents referred to by the Technical Manual on the Maintenance of Clean Air are a step below on the hierarchical ladder of legislative and regulatory documentation. This set of documents is represented by numerous DIN standards and VDI guidelines. The article considers the methodology from the guidance document VDI 3479. The shortcomings and problems of applying the given method in Russia are shown.

Quantum computing with defects.

PubMed

Weber, J R; Koehl, W F; Varley, J B; Janotti, A; Buckley, B B; Van de Walle, C G; Awschalom, D D

2010-05-11

Identifying and designing physical systems for use as qubits, the basic units of quantum information, are critical steps in the development of a quantum computer. Among the possibilities in the solid state, a defect in diamond known as the nitrogen-vacancy (NV(-1)) center stands out for its robustness--its quantum state can be initialized, manipulated, and measured with high fidelity at room temperature. Here we describe how to systematically identify other deep center defects with similar quantum-mechanical properties. We present a list of physical criteria that these centers and their hosts should meet and explain how these requirements can be used in conjunction with electronic structure theory to intelligently sort through candidate defect systems. To illustrate these points in detail, we compare electronic structure calculations of the NV(-1) center in diamond with those of several deep centers in 4H silicon carbide (SiC). We then discuss the proposed criteria for similar defects in other tetrahedrally coordinated semiconductors.

Advanced aircraft for atmospheric research

NASA Technical Reports Server (NTRS)

Russell, P.; Wegener, S.; Langford, J.; Anderson, J.; Lux, D.; Hall, D. W.

1991-01-01

The development of aircraft for high-altitude research is described in terms of program objectives and environmental, technological limitations, and the work on the Perseus A aircraft. The need for these advanced aircraft is proposed in relation to atmospheric science issues such as greenhouse trapping, the dynamics of tropical cyclones, and stratospheric ozone. The implications of the study on aircraft design requirements is addressed with attention given to the basic categories of high-altitude, long-range, long-duration, and nap-of-the-earth aircraft. A strategy is delineated for a platform that permits unique stratospheric measurements and is a step toward a more advanced aircraft. The goal of Perseus A is to carry scientific air sampling payloads weighing at least 50 kg to altitudes of more than 25 km. The airfoils are designed for low Reynolds numbers, the structural weight is very low, and the closed-cycle power plant runs on liquid oxygen.

Design and development of the mobile game based on the J2ME technology

NASA Astrophysics Data System (ADS)

He, Junhua

2011-12-01

With the continuous improvement of mobile performance, mobile entertainment applications market trend has been increasingly clear, mobile entertainment applications will be after the PC entertainment applications is another important business growth. Through the full analysis of the current mobile entertainment applications market demand and trends, the author has accumulated a lot of theoretical knowledge and practical experience. Rational, using of some new technology for a mobile entertainment games design, and described the development of key technologies required for mobile game an analysis and design of the game, and to achieve a complete game development. Light of the specific mobile game project - "Battle City", detailed the development of a mobile game based on the J2ME platform, the basic steps and the various key elements, focusing on how to use object-oriented thinking on the role of mobile phones in the abstract and Game Animation package, the source code with specific instructions.

Design and development of the mobile game based on the J2ME technology

NASA Astrophysics Data System (ADS)

He, JunHua

2012-01-01

With the continuous improvement of mobile performance, mobile entertainment applications market trend has been increasingly clear, mobile entertainment applications will be after the PC entertainment applications is another important business growth. Through the full analysis of the current mobile entertainment applications market demand and trends, the author has accumulated a lot of theoretical knowledge and practical experience. Rational, using of some new technology for a mobile entertainment games design, and described the development of key technologies required for mobile game an analysis and design of the game, and to achieve a complete game development. Light of the specific mobile game project - "Battle City", detailed the development of a mobile game based on the J2ME platform, the basic steps and the various key elements, focusing on how to use object-oriented thinking on the role of mobile phones in the abstract and Game Animation package, the source code with specific instructions.

Biourbanism: Solar based urban and regional design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, D.

1999-07-01

New neighborhoods for an additional one billion people will need to be constructed on the planet within the next 10 years. If the historic patterns of growth continue--the sprawl, the congestion, the draining of swamps, the loss of agricultural land--the requirement for all basic resources will outstrip the availability. While this is of great concern, it is the destruction of an acceptable quality of life--the sense of place--that will be the most difficult and expensive to change. An essential step to reverse the direction of this undesirable future is changing the design and planning of these communities to work withmore » resident solar energies, regional biology, local renewable resources, and sustainable urban planning and design principles. Design can make a difference. This paper develops the view that the solar approach must include urban and regional design and presents solar-based renewable resources example of the design of regions.« less

A Brief User's Guide to the Excel ® -Based DF Calculator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jubin, Robert T.

2016-06-01

To understand the importance of capturing penetrating forms of iodine as well as the other volatile radionuclides, a calculation tool was developed in the form of an Excel ® spreadsheet to estimate the overall plant decontamination factor (DF). The tool requires the user to estimate splits of the volatile radionuclides within the major portions of the reprocessing plant, speciation of iodine and individual DFs for each off-gas stream within the Used Nuclear Fuel reprocessing plant. The Impact to the overall plant DF for each volatile radionuclide is then calculated by the tool based on the specific user choices. The Excelmore » ® spreadsheet tracks both elemental and penetrating forms of iodine separately and allows changes in the speciation of iodine at each processing step. It also tracks 3H, 14C and 85Kr. This document provides a basic user's guide to the manipulation of this tool.« less

A Review of Avian Monitoring and Mitigation Information at Existing Utility-Scale Solar Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walston, Leroy J.; Rollins, Katherine E.; Smith, Karen P.

2015-01-01

There are two basic types of solar energy technology: photovoltaic and concentrating solar power. As the number of utility-scale solar energy facilities using these technologies is expected to increase in the United States, so are the potential impacts on wildlife and their habitats. Recent attention is on the risk of fatality to birds. Understanding the current rates of avian mortality and existing monitoring requirements is an important first step in developing science-based mitigation and minimization protocols. The resulting information also allows a comparison of the avian mortality rates of utility-scale solar energy facilities with those from other technologies and sources,more » as well as the identification of data gaps and research needs. This report will present and discuss the current state of knowledge regarding avian issues at utility-scale solar energy facilities.« less

A template for integrated community sustainability planning.

PubMed

Ling, Christopher; Hanna, Kevin; Dale, Ann

2009-08-01

This article describes a template for implementing an integrated community sustainability plan. The template emphasizes community engagement and outlines the components of a basic framework for integrating ecological, social and economic dynamics into a community plan. The framework is a series of steps that support a sustainable community development process. While it reflects the Canadian experience, the tools and techniques have applied value for a range of environmental planning contexts around the world. The research is case study based and draws from a diverse range of communities representing many types of infrastructure, demographics and ecological and geographical contexts. A critical path for moving local governments to sustainable community development is the creation and implementation of integrated planning approaches. To be effective and to be implemented, a requisite shift to sustainability requires active community engagement processes, political will, and a commitment to political and administrative accountability, and measurement.

The need for targeted implementation research to improve coverage of basic vaccines and introduction of new vaccines.

PubMed

Arora, Narendra K; Lal, Altaf A; Hombach, Joachim M; Santos, Jose I; Bhutta, Zulfiqar A; Sow, Samba O; Greenwood, Brian

2013-04-18

The Decade of Vaccines Collaboration (DoVC) Research and Development (R&D) Working Group identified implementation research as an important step toward achieving high vaccine coverage and the uptake of desirable new vaccines. The R&D Working Group noted that implementation research is highly complex and requires participation of stakeholders from diverse backgrounds to ensure effective planning, execution, interpretation, and adoption of research outcomes. Unlike other scientific disciplines, implementation research is highly contextual and depends on social, cultural, geographic, and economic factors to make the findings useful for local, national, and regional applications. This paper presents the broad framework for implementation research in support of immunization and sets out a series of research questions developed through a Delphi process (during a DoVC-supported workshop in Sitges, Spain) and a literature review. Copyright © 2013 Elsevier Ltd. All rights reserved.

Academic pharmacy administrators' perceptions of core requirements for entry into professional pharmacy programs.

PubMed

Broedel-Zaugg, Kimberly; Buring, Shauna M; Shankar, Nathan; Soltis, Robert; Stamatakis, Mary K; Zaiken, Kathy; Bradberry, J Chris

2008-06-15

To determine which basic and social science courses academic pharmacy administrators believe should be required for entry into the professional pharmacy program and what they believe should be the required length of preprofessional study. An online survey was sent to deans of all colleges and schools of pharmacy in the United States. Survey respondents were asked to indicate their level of agreement as to whether the basic and social science courses listed in the survey instrument should be required for admission to the professional program. The survey instrument also included queries regarding the optimal length of preprofessional study, whether professional assessment testing should be part of admission requirements, and the respondents' demographic information. The majority of respondents strongly agreed that the fundamental coursework in the basic sciences (general biology, general chemistry, organic chemistry) and English composition should be required for entrance into the professional program. Most respondents also agreed that public speaking, ethics, and advanced basic science and math courses (physiology, biochemistry, calculus, statistics) should be completed prior to entering the professional program. The preprofessional requirements that respondents suggested were not necessary included many of the social science courses. Respondents were evenly divided over the ideal length for preprofessional pharmacy education programs. Although requirements for preprofessional admission have been changing, there is no consistent agreement on the content or length of the preprofessional program.

49 CFR 633.21 - Basic requirement.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.21 Basic requirement. (a) If a project meets the definition of major capital project, the recipient shall submit a project management plan prepared in accordance with § 633.25 of this part, as a condition of Federal financial...

5 CFR 831.1203 - Basic requirements for disability retirement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Basic requirements for disability retirement. 831.1203 Section 831.1203 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED... service, or with the former employing agency or the Office of Personnel Management (OPM) within 1 year...

5 CFR 831.1203 - Basic requirements for disability retirement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 2 2011-01-01 2011-01-01 false Basic requirements for disability retirement. 831.1203 Section 831.1203 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED... service, or with the former employing agency or the Office of Personnel Management (OPM) within 1 year...

75 FR 32943 - Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-10

... basic safety and essential performance--Collateral standard: Electromagnetic compatibility--Requirements... standard: Electromagnetic compatibility--Requirements and tests 5-34 5-53 IEC 60601-1-2 Third edition 2007... for basic safety and essential performance--Collateral standard: Electromagnetic compatibility...

49 CFR 236.923 - Task analysis and basic requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Standards for Processor-Based Signal and Train Control Systems § 236.923 Task analysis and basic requirements..., inspection, testing, and operating tasks that must be performed on a railroad's products. This includes the...

49 CFR 236.923 - Task analysis and basic requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Standards for Processor-Based Signal and Train Control Systems § 236.923 Task analysis and basic requirements..., inspection, testing, and operating tasks that must be performed on a railroad's products. This includes the...

49 CFR 236.923 - Task analysis and basic requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Standards for Processor-Based Signal and Train Control Systems § 236.923 Task analysis and basic requirements..., inspection, testing, and operating tasks that must be performed on a railroad's products. This includes the...

49 CFR 236.923 - Task analysis and basic requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Standards for Processor-Based Signal and Train Control Systems § 236.923 Task analysis and basic requirements..., inspection, testing, and operating tasks that must be performed on a railroad's products. This includes the...

49 CFR 633.21 - Basic requirement.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.21 Basic requirement. (a) If a project meets the definition of major capital project, the recipient shall submit a project management plan prepared in accordance with § 633.25 of this part, as a condition of Federal financial...

49 CFR 633.21 - Basic requirement.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.21 Basic requirement. (a) If a project meets the definition of major capital project, the recipient shall submit a project management plan prepared in accordance with § 633.25 of this part, as a condition of Federal financial...

49 CFR 633.21 - Basic requirement.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.21 Basic requirement. (a) If a project meets the definition of major capital project, the recipient shall submit a project management plan prepared in accordance with § 633.25 of this part, as a condition of Federal financial...

49 CFR 633.21 - Basic requirement.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.21 Basic requirement. (a) If a project meets the definition of major capital project, the recipient shall submit a project management plan prepared in accordance with § 633.25 of this part, as a condition of Federal financial...