Technology assessment of future intercity passenger transporation systems. Volume 1: Summary report

NASA Technical Reports Server (NTRS)

1976-01-01

Technical, economic, environmental, and sociopolitical issues associated with future intercity transportation system options were assured. Technology assessment was used as a tool to assist in the identification of basic research and technology development tasks that should be undertaken. The emphasis was on domestic passenger transportation, but interfaces with freight and international transportation were considered.

Qualification Procedures for VHSIC/VLSI

DTIC Science & Technology

1990-12-01

alternative approach for qualification of complex microcircuits. To address the technical issues related to a process oriented qualification approach, the...methodology of microcircuit process control to promote the United States to a position of supplying the nighest quality and most reliable...available resources . o Coordinate document reviews with weekly and monthly status reviews on progress. o Summarize results and collate into four basic

On issue of reconstruction at central distribution substation by example of one of plants of Chelyabinsk region

NASA Astrophysics Data System (ADS)

Brylina, O. G.; Semenova, K. D.; Shashkin, V. YU

2018-03-01

The article considers the issues of increasing the reliability and economy of the distribution substation. The result is found due to the reconstruction of the central distribution substation and one of the plants of Chelyabinsk region. The reasons for the reconstruction are explained. A comparison of oil and vacuum circuit breakers is made. The advantages of vacuum circuit breakers are shown. Alternative replacement of cables is offered. The basic technical characteristics of the cable brands are shown. The results of reconstruction are proved.

The DOE Bioenergy Research Centers: History, Operations, and Scientific Output

DOE PAGES

Slater, Steven C.; Simmons, Blake A.; Rogers, Tamara S.; ...

2015-08-20

Over the past 7 years, the US Department of Energy's Office of Biological and Environmental Research has funded three Bioenergy Research Centers (BRCs). These centers have developed complementary and collaborative research portfolios that address the key technical and economic challenges in biofuel production from lignocellulosic biomass. All three centers have established a close, productive relationship with DOE's Joint Genome Institute (JGI). This special issue of Bioenergy Research samples the breadth of basic science and engineering work required to underpin a diverse, sustainable, and robust biofuel industry. In this report, which was collaboratively produced by all three BRCs, we discuss themore » BRC contributions over their first 7 years to the development of renewable transportation fuels. In additon, we also highlight the BRC research published in the current issue and discuss technical challenges in light of recent progress.« less

Space resources. Volume 3: Materials

NASA Technical Reports Server (NTRS)

Mckay, Mary Fae (Editor); Mckay, David S. (Editor); Duke, Michael B. (Editor)

1992-01-01

Space Resources addresses the issues of using space resources to support life on the Moon and for exploration of Mars. This volume - Materials - covers a number of technical and policy issues regarding the materials in space (mainly lunar and asteroidal) which can be used to support space operations. In part 1, nature and location of these materials, exploration strategy, evaluation criteria, and the technical means to collect or mine these materials is discussed. A baseline lunar mine and the basics of asteroid mining are presented and critiqued. In part 2, the beneficiation of ores and the extraction of such materials as oxygen, metals, and the makings of concrete are discussed. In part 3, the manufacturing and fabrication of nonterrestrial products are discussed. The economic tradeoffs between bringing needed products from Earth and making these products on location in space is considered.

Software in the Classroom: Issues in the Design of Effective Software Tools. Technical Report No. 15.

ERIC Educational Resources Information Center

Kurland, D. Midian

This paper identifies three ways that computers are used in educational contexts. The first and most widespread use is as a tutor, i.e., as a delivery system for programmed instruction and drill-and-practice activities. The second use is as a programming environment to teach programming languages such as BASIC, LOGO, or PASCAL. The third use is as…

Development of wavelet analysis tools for turbulence

NASA Technical Reports Server (NTRS)

Bertelrud, A.; Erlebacher, G.; Dussouillez, PH.; Liandrat, M. P.; Liandrat, J.; Bailly, F. Moret; Tchamitchian, PH.

1992-01-01

Presented here is the general framework and the initial results of a joint effort to derive novel research tools and easy to use software to analyze and model turbulence and transition. Given here is a brief review of the issues, a summary of some basic properties of wavelets, and preliminary results. Technical aspects of the implementation, the physical conclusions reached at this time, and current developments are discussed.

Methodological Considerations in Researching Community Services in the Northeast. A Northeast Regional Community Services Study. New Jersey Agricultural Experiment Station Bulletin 836, September 1975.

ERIC Educational Resources Information Center

Derr, Donn A., Ed.; And Others

Documenting several elements relative to regional research on community services in 10 northeastern states as experienced in the U.S. Department of Agriculture's Regional Research Project NE-77 (1971), this monograph represents the NE-77 technical committee's effort to identify basic research issues re: the delivery of community services in rural…

Mines and human casualties: a robotics approach toward mine clearing

NASA Astrophysics Data System (ADS)

Ghaffari, Masoud; Manthena, Dinesh; Ghaffari, Alireza; Hall, Ernest L.

2004-10-01

An estimated 100 million landmines which have been planted in more than 60 countries kill or maim thousands of civilians every year. Millions of people live in the vast dangerous areas and are not able to access to basic human services because of landmines" threats. This problem has affected many third world countries and poor nations which are not able to afford high cost solutions. This paper tries to present some experiences with the land mine victims and solutions for the mine clearing. It studies current situation of this crisis as well as state of the art robotics technology for the mine clearing. It also introduces a survey robot which is suitable for the mine clearing applications. The results show that in addition to technical aspects, this problem has many socio-economic issues. The significance of this study is to persuade robotics researchers toward this topic and to peruse the technical and humanitarian facets of this issue.

Transuranic Waste Test Facility Development Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Looper, M.G.

1987-05-05

This letter discusses the development and test program planned for the Transuranic Waste Test Facility (TWTF). The planned effort is based on previous work in the ADandD Pilot Facility and testing of TWTF equipment before installation. Input from Waste Management and AED Fairview is included. The program will focus on the following areas: Retrieval; Material Handling; Size Reduction; Operation and Maintenance. The program will take 1-1/2 to 2 years to complete and began in December 1986. Technical Data Summaries (TDS) and basic data reports will be issued periodically to document results and provide basic data for the Transuranic Waste Facilitymore » (TWF). 2 refs., 2 figs.« less

PTC '84 - Pacific Telecommunications Conference, 6th, Honolulu, HI, January 8-11, 1984, Proceedings

NASA Astrophysics Data System (ADS)

Wedemeyer, D. J.; Harms, L. S.

Various papers on telecommunications are presented. The general topics addressed include: basic communications needs in the Pacific hemisphere; communication needs of businesses in the local, national, and regional marketplace; needs for telecommunication in rural communities; communication needs of minority groups; technical and institutional responses to meeting needs; and developments in high technology. Also addressed are: telecommunication and information technology to meet basic needs; issues and policy considerations in the Pacific telecommunications environment; effects of telecommunications development on daily social activity; problems and progress of new technology; economic demand for telecommunications in the Pacific region as a reflection of needs.

Supporting tobacco control: stimulating local newspaper coverage with a technical assistance website for local coalitions.

PubMed

Buller, David B; Bettinghaus, Erwin P; Helme, Donald; Young, Walter F; Borland, Ron; Maloy, Julie A; Cutter, Gary R; Andersen, Peter A; Walther, Joseph B

2011-11-01

A large and growing literature confirms that well-designed web-based programs can be effective in preventing or treating several chronic diseases. This study examined how the Internet can deliver information and train community activists and specifically tested the effects of web-based technical assistance on local tobacco control coalitions' efforts to use media advocacy to advance their agendas. The authors compared a highly interactive, Enhanced website (intervention) to a noninteractive, Basic text-based website (comparison) in Colorado communities. A total of 24 tobacco control coalitions led by local county health departments and nursing services were enrolled in the project and randomly assigned to use either the intervention or comparison website. A total of 73 local daily and weekly newspapers were identified in the service areas of 23 of the 24 coalitions. A posttest assessment of newspaper coverage was conducted to locate all newspaper articles with tobacco control information published between January 1 and April 9, 2004, the last 3 months of the intervention. Although there was no evidence of a treatment effect on the frequency of newspaper articles on tobacco-related issues, there was, however, evidence that newspapers in counties where the coalition had access to the Enhanced website printed more stories focused on local/regional issues and more anti-tobacco local/regional stories than in the counties where coalitions had access to the Basic website. Coalitions can improve their influence on local media for community tobacco control when high-quality online technical assistance, training, and resources are available to them.

A Basic Unit on Ethics for Technical Communicators.

ERIC Educational Resources Information Center

Markel, Mike

1991-01-01

Describes a basic unit on ethics for technical communicators and offers suggestions on how to go about teaching the unit. Includes a brief definition of ethics, an explanation of the employee's three basic obligations, ways to analyze common dilemmas in technical communication, the role of the code of conduct, and a case study. (SR)

The Sample for the Sustaining Effects Study and Projections of its Characteristic to the National Population. Technical Report No. 1 from the Study of Sustaining Effects of Compensatory Education on Basic Skills.

ERIC Educational Resources Information Center

Hoepfner, Ralph; And Others

Sampling techniques used in "A Study of the Sustaining Effects of Compensatory Education" are described in detail. The Sustaining Effects Study is a large, multi-faceted study of issues related to the compensatory education of elementary school students. Public elementary schools that include grades between one and six are eligible for…

A risk assessment methodology to evaluate the risk failure of managed aquifer recharge in the Mediterranean Basin

NASA Astrophysics Data System (ADS)

Rodríguez-Escales, Paula; Canelles, Arnau; Sanchez-Vila, Xavier; Folch, Albert; Kurtzman, Daniel; Rossetto, Rudy; Fernández-Escalante, Enrique; Lobo-Ferreira, João-Paulo; Sapiano, Manuel; San-Sebastián, Jon; Schüth, Christoph

2018-06-01

Managed aquifer recharge (MAR) can be affected by many risks. Those risks are related to different technical and non-technical aspects of recharge, like water availability, water quality, legislation, social issues, etc. Many other works have acknowledged risks of this nature theoretically; however, their quantification and definition has not been developed. In this study, the risk definition and quantification has been performed by means of fault trees and probabilistic risk assessment (PRA). We defined a fault tree with 65 basic events applicable to the operation phase. After that, we have applied this methodology to six different managed aquifer recharge sites located in the Mediterranean Basin (Portugal, Spain, Italy, Malta, and Israel). The probabilities of the basic events were defined by expert criteria, based on the knowledge of the different managers of the facilities. From that, we conclude that in all sites, the perception of the expert criteria of the non-technical aspects were as much or even more important than the technical aspects. Regarding the risk results, we observe that the total risk in three of the six sites was equal to or above 0.90. That would mean that the MAR facilities have a risk of failure equal to or higher than 90 % in the period of 2-6 years. The other three sites presented lower risks (75, 29, and 18 % for Malta, Menashe, and Serchio, respectively).

WORKING WITH STUDENTS INSIDE AND OUTSIDE THE CLASSROOM IN ADULT BASIC EDUCATION PROGRAMS.

ERIC Educational Resources Information Center

BRAZZIEL, WILLIAM F.

TECHNICAL EDUCATION OF THE ADULT HARD-CORE UNEMPLOYED OFTEN FAILS BECAUSE OF PERSONAL PROBLEMS AND BASIC EDUCATION AND CULTURAL LACKS. A BROAD CONCEPT OF EDUCATION IS ESSENTIAL TO PROGRAMS FOR DEVELOPMENT OF TECHNICAL SKILLS. A COLLEGE PROJECT DESIGNED TO MEET THESE REQUIREMENTS IS PRESENTED. A COMBINATION OF BASIC AND TECHNICAL EDUCATION WITH THE…

On the practicality of emergency surgery during long-duration space missions.

PubMed

Dawson, David L

2008-07-01

While discussions of the practicality of surgery in space often focus on technical issues, such as adapting instrumentation and procedures for use in microgravity, programmatic issues need to be addressed if meaningful capabilities for emergency surgery are to be considered for human exploration missions beyond low Earth orbit. Advanced technologies that have been evaluated, including simulation-enhanced training, telementoring, or robotic assistance, might help prepare or augment a crew medical officer, but a physician with advanced training and relevant experience will be needed if surgical capabilities beyond basic emergency aid are to be considered. Specific operational roles for physician-astronauts should be established.

Department of Defense Training Technology Technical Group (T2TG) Minutes and Briefings of 6th Meeting

DTIC Science & Technology

1992-03-01

the Services or "What are the Research Issues in the use of Virtual Reality in Training?" 173 Visual Communication In Multi-Media Virtual Realities...This basic research project in visual communication examines how visual knowledge should be structured to take full advantage of advanced computer...theoretical framework to begin to analyze the comparative strengths of speech communication versus visual communication in the exchange of shared mental

Joint federal research and development process to meet state and local needs. Part 1. Science and technology and political decision making

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wise, H F; Smith, L K; Einsweiler, R C

This part of the handbook addresses the basic how to do it - how states and local governments can identify complex and cross-cutting issues and develop and manage scientific and technical resources in seeking policy solutions to such issues. The following subjects are discussed: background statement of the issue; the research/decision-making process; defining problems and identifying research components; research and decision-making strategies; how to identify existing knowledge or ongoing research in the area of policy concern; and managing multi-disciplinary research. The fourteen agencies involved in this effort include: US Departments of Energy, Agriculture, Transportation, Housing and Urban Development, Environmental Protectionmore » Agency, and National Science Foundation. (PSB)« less

Physical layer simulation study for the coexistence of WLAN standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Howlader, M. K.; Keiger, C.; Ewing, P. D.

This paper presents the results of a study on the performance of wireless local area network (WLAN) devices in the presence of interference from other wireless devices. To understand the coexistence of these wireless protocols, simplified physical-layer-system models were developed for the Bluetooth, Wireless Fidelity (WiFi), and Zigbee devices, all of which operate within the 2.4-GHz frequency band. The performances of these protocols were evaluated using Monte-Carlo simulations under various interference and channel conditions. The channel models considered were basic additive white Gaussian noise (AWGN), Rayleigh fading, and site-specific fading. The study also incorporated the basic modulation schemes, multiple accessmore » techniques, and channel allocations of the three protocols. This research is helping the U.S. Nuclear Regulatory Commission (NRC) understand the coexistence issues associated with deploying wireless devices and could prove useful in the development of a technical basis for guidance to address safety-related issues with the implementation of wireless systems in nuclear facilities. (authors)« less

Grids: The Top Ten Questions

DOE PAGES

Schopf, Jennifer M.; Nitzberg, Bill

2002-01-01

The design and implementation of a national computing system and data grid has become a reachable goal from both the computer science and computational science point of view. A distributed infrastructure capable of sophisticated computational functions can bring many benefits to scientific work, but poses many challenges, both technical and socio-political. Technical challenges include having basic software tools, higher-level services, functioning and pervasive security, and standards, while socio-political issues include building a user community, adding incentives for sites to be part of a user-centric environment, and educating funding sources about the needs of this community. This paper details the areasmore » relating to Grid research that we feel still need to be addressed to fully leverage the advantages of the Grid.« less

Issues Concerning The Development Of A Mobile Platform For Health Care Applications

NASA Astrophysics Data System (ADS)

Korba, Larry W.; Liscano, Ramiro; Green, David; Durie, Nelson

1989-03-01

There are a number of problems that must yet be overcome before robotic technology can be applied in a hospital or a home care setting. The four basic problems are: cost, safety, finding appropriate applications and developing application specific solutions. Advanced robotics technology is now costly because of the complexity associated with autonomous systems. In any application, it is most important that the safety of the individuals using or exposed to the vehicle is ensured. Often in the health care field, innovative and useful new devices require an inordinate amount of time before they are accepted. The technical and ergonomic problems associated with any application must be solved so that cost containment, safety, ease of use, and quality of life are ensured. This paper discusses these issues in relation to our own development of an autonomous vehicle for health care applications. In this advancement, a commercially available platform is being equipped with an on-board, multiprocessor computer system and a variety of sensor systems. In order to develop pertinent solutions to the technical problems, there must be a framework wherein there is a focus upon the practical issues associated with the end application.

Relevant Optical Issues of the SPM-Twin Telescopes

NASA Astrophysics Data System (ADS)

González, J. J.; Orlov, V.

2007-06-01

Most technical aspects of the SPM-Twin Telescopes have been basically solved by the Magellan and MMT projects. However, the Spectroscopic "Wide Field Telescope" will be the first of its kind and an optical solution based on Magellan needs to be further investigated. In addition, the requirements for adaptive optics for the Standard Field Telescope need to be worked out. In this contribution we will compare optical wide field conceptual designs and the potential scope of AO for SPM-Twin.

A mobile network-based multimedia teleconference system for homecare services.

PubMed

Zhang, Zhaomin; He, Aiguo; Wei, Daming

2008-03-01

Because most research and development for homecare services have focused on providing connections between home and service centers, the goal of the present work is to develop techniques and create realtime communications to connect service centers and homecare workers in mobile environments. A key technical issue for this research is how to overcome the limitation of bandwidth in mobile media and networks. An effort has been made to balance performance of communication and basic demands in telehealth through optimized system design and technical implementation. Implementations using third generation (3G) Freedom Of Mobile multimedia Access (FOMA) and Personal Handyphone System (PHS) were developed and evaluated. We conclude that the system we developed based on 3G FOMA provides sufficient and satisfactory functions for use in homecare services.

Maneuverability and mobility in palm-sized legged robots

NASA Astrophysics Data System (ADS)

Kohut, Nicholas J.; Birkmeyer, Paul M.; Peterson, Kevin C.; Fearing, Ronald S.

2012-06-01

Palm sized legged robots show promise for military and civilian applications, including exploration of hazardous or difficult to reach places, search and rescue, espionage, and battlefield reconnaissance. However, they also face many technical obstacles, including- but not limited to- actuator performance, weight constraints, processing power, and power density. This paper presents an overview of several robots from the Biomimetic Millisystems Laboratory at UC Berkeley, including the OctoRoACH, a steerable, running legged robot capable of basic navigation and equipped with a camera and active tail; CLASH, a dynamic climbing robot; and BOLT, a hybrid crawling and flying robot. The paper also discusses, and presents some preliminary solutions to, the technical obstacles listed above plus issues such as robustness to unstructured environments, limited sensing and communication bandwidths, and system integration.

While it is not deliberate, much of today's biomedical research contains logical and technical flaws, showing a need for corrective action

PubMed Central

He, Yan; Yuan, Chengfu; Chen, Lichan; Liu, Yanjie; Zhou, Haiyan; Xu, Ningzhi; Liao, Dezhong Joshua

2018-01-01

Biomedical research has advanced swiftly in recent decades, largely due to progress in biotechnology. However, this rapid spread of new, and not always-fully understood, technology has also created a lot of false or irreproducible data and artifacts, which sometimes have led to erroneous conclusions. When describing various scientific issues, scientists have developed a habit of saying “on one hand… but on the other hand…”, because discrepant data and conclusions have become omnipresent. One reason for this problematic situation is that we are not always thoughtful enough in study design, and sometimes lack enough philosophical contemplation. Another major reason is that we are too rushed in introducing new technology into our research without assimilating technical details. In this essay, we provide examples in different research realms to justify our points. To help readers test their own weaknesses, we raise questions on technical details of RNA reverse transcription, polymerase chain reactions, western blotting and immunohistochemical staining, as these methods are basic and are the base for other modern biotechnologies. Hopefully, after contemplation and reflection on these questions, readers will agree that we indeed know too little about these basic techniques, especially about the artifacts they may create, and thus many conclusions drawn from the studies using those ever-more-sophisticated techniques may be even more problematic. PMID:29511367

While it is not deliberate, much of today's biomedical research contains logical and technical flaws, showing a need for corrective action.

PubMed

He, Yan; Yuan, Chengfu; Chen, Lichan; Liu, Yanjie; Zhou, Haiyan; Xu, Ningzhi; Liao, Dezhong Joshua

2018-01-01

Biomedical research has advanced swiftly in recent decades, largely due to progress in biotechnology. However, this rapid spread of new, and not always-fully understood, technology has also created a lot of false or irreproducible data and artifacts, which sometimes have led to erroneous conclusions. When describing various scientific issues, scientists have developed a habit of saying "on one hand… but on the other hand…", because discrepant data and conclusions have become omnipresent. One reason for this problematic situation is that we are not always thoughtful enough in study design, and sometimes lack enough philosophical contemplation. Another major reason is that we are too rushed in introducing new technology into our research without assimilating technical details. In this essay, we provide examples in different research realms to justify our points. To help readers test their own weaknesses, we raise questions on technical details of RNA reverse transcription, polymerase chain reactions, western blotting and immunohistochemical staining, as these methods are basic and are the base for other modern biotechnologies. Hopefully, after contemplation and reflection on these questions, readers will agree that we indeed know too little about these basic techniques, especially about the artifacts they may create, and thus many conclusions drawn from the studies using those ever-more-sophisticated techniques may be even more problematic.

Teaching Intercultural Communication in a Basic Technical Writing Course: A Survey of Our Current Practices and Methods

ERIC Educational Resources Information Center

Matveeva, Natalia

2008-01-01

This research article reports the results of an online survey distributed among technical writing instructors in 2006. The survey aimed to examine how we teach intercultural communication in basic technical writing courses: our current practices and methods. The article discusses three major challenges that instructors may face when teaching about…

Improving the Basic Skills of Vocational-Technical Students: An Administrator's Guide. Competency-Based Vocational Education Administrator Module Series.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This guide provides information and guidelines intended to assist vocational administrators in developing and evaluating programs to improve the basic skills of vocational-technical students. Part one provides background information about basic skills and examines their role in vocational education. Discussed next are various program types,…

OB's high voltage laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1966-01-01

The January issue of Hi-Tension News provides a detailed description of the advanced surge test facilities and procedures in daily operation at the OB High Voltage Laboratory in Barberton, Ohio. Technical competences achieved in this laboratory contribute to the essential factors of design confirmation to basic studies of ehv insulation systems, conductor and hardware performance, and optimum tower construction. Known throughout the industry for authenticity of its full scale, all weather outdoor testing, OB's High Voltage Laboratory is a full-fledged participant in the NEMA-sponsored program to make testing facilities available on a cooperative basis.

Simple Automatic File Exchange (SAFE) to Support Low-Cost Spacecraft Operation via the Internet

NASA Technical Reports Server (NTRS)

Baker, Paul; Repaci, Max; Sames, David

1998-01-01

Various issues associated with Simple Automatic File Exchange (SAFE) are presented in viewgraph form. Specific topics include: 1) Packet telemetry, Internet IP networks and cost reduction; 2) Basic functions and technical features of SAFE; 3) Project goals, including low-cost satellite transmission to data centers to be distributed via an Internet; 4) Operations with a replicated file protocol; 5) File exchange operation; 6) Ground stations as gateways; 7) Lessons learned from demonstrations and tests with SAFE; and 8) Feedback and future initiatives.

The paradox of managing a project-oriented matrix: establishing coherence within chaos.

PubMed

Greiner, L E; Schein, V E

1981-01-01

Projects that require the flexible coordination of multidisciplinary teams have tended to adopt a matrix structure to accomplish complex tasks. Yet these project-oriented matrix structures themselves require careful coordination if they are to realize the objectives set for them. The authors identify the basic organizational questions that project-oriented matrix organizations must face. They examine the relationship between responsibility and authority; the tradeoffs between economic efficiency and the technical quality of the work produced; and the sensitive issues of managing individualistic, highly trained professionals while also maintaining group cohesiveness.

Undergraduate basic surgical skills education: impact on attitudes to a career in surgery and surgical skills acquisition.

PubMed

McAnena, P F; O'Halloran, N; Moloney, B M; Courtney, D; Waldron, R M; Flaherty, G; Kerin, M J

2018-05-01

Basic surgical skills modules in medical education are effective in teaching skills and increasing confidence among students approaching surgery. However, these modules are not delivered universally and their effect on the professional development of graduates has not been established. We aimed to assess the impact of a 10-week basic surgical skills module on attitudes and technical skills of first year medical students compared to interns. Eighteen students participated and were assessed using a 4-part questionnaire. Technical skills were assessed by observing students perform a basic interrupted suture, using the objective structured assessment of technical skills (OSATS) tool. Fourteen interns were recruited. Students were more confident in surgical scrubbing (mean score 4.0 vs. 2.86, p = 0.001), and performing a basic suture (4.05 vs. 1.93, p = 0.000), more enthusiastic about assisting with an operation (4.5 vs. 3.0, p = 0.001) and more likely to consider a career in surgery (4.16 vs. 2.28, p = 0.000). Technical skills were greater in the student group (mean score 30.8 vs. 19.6, p = 0.001). Five interns had taken part in surgical skills modules as undergraduates. Their technical skills were significantly higher compared to interns who had not (n = 9) (28.8 vs. 14.5, p = 0.006), and they were more likely to consider a career in surgery (3.6 vs. 1.5, p = 0.036). The introduction of surgical skills teaching to the undergraduate medical curriculum has a positive impact on students' attitudes towards surgery and accelerates basic technical skills development. Consideration should be given to development of a standardised undergraduate core curriculum in basic surgical skills teaching.

Specificity and Engagement: Increasing ELSI s Relevance to Nano Scientists

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shumpert, Barry L.; Wolfe, Amy K.; Bjornstad, David J.

Scholars studying the ethical, legal, and social issues (ELSI) associated with emerging technologies maintain the importance of considering these issues throughout the research and development cycle, even during the earliest stages of basic research. Embedding these considerations within the scientific process requires communication between ELSI scholars and the community of physical scientists who are conducting that basic research. We posit that this communication can be effective on a broad scale only if it links societal issues directly to characteristics of the emerging technology that are relevant to the physical and natural scientists involved in research and development. In this article,more » we examine nano-ELSI literature from 2003 to 2010 to discern the degree to which it makes these types of explicit connections. We find that, while the literature identifies a wide range of issues of societal concern, it generally does so in a non-specific manner. It neither links societal issues to particular forms or characteristics of widely divergent nanotechnologies nor to any of the many potential uses to which those nanotechnologies may be put. We believe that these kinds of specificity are essential to those engaged in nano-scale research. We also compare the literature-based findings to observations from interviews we conducted with nanoscientists and conclude that ELSI scholars should add technical- and application-related forms of specificity to their work and their writings to enhance effectiveness and impact in communicating with one important target audience members of the nanoscale science community.« less

Training in reproductive health and sexuality: the case of a regional program in Latin America.

PubMed

Ramos, S; Gogna, M

1997-01-01

Beginning in July 1993, a 5-year program has sought to provide social research, training, and technical assistance in reproductive health and sexuality in Argentina, Chile, Peru, and Colombia by 1) building research capacity and promoting an interdisciplinary approach to reproductive health and sexuality and 2) promoting a gender perspective to these issues. The target groups are women's nongovernmental organizations (NGOs); family planning, reproductive health, and women's health providers; and social scientists conducting health-related research. Training activities include regional workshops, a Regional Resident Fellowship Program to support graduate-level education, and provision of technical assistance. The first 3 years of the program have revealed that the basic training needs in these areas include 1) helping women's NGOs improve their record-keeping capacity, evaluation processes, theoretical and methodological background, and institutional-building ability; 2) sensitizing women's health providers to sociocultural dimension of health-illness issues and to a gender and human rights perspective; and 3) training social scientist researchers to apply their skills in applied research, develop their theoretical background, and improve research quality control procedures. The main challenges for training activities in the field of reproductive health and sexuality are posed by the complexity of the issues and their interdisciplinary nature.

Defining Information Security.

PubMed

Lundgren, Björn; Möller, Niklas

2017-11-15

This article proposes a new definition of information security, the 'Appropriate Access' definition. Apart from providing the basic criteria for a definition-correct demarcation and meaning concerning the state of security-it also aims at being a definition suitable for any information security perspective. As such, it bridges the conceptual divide between so-called 'soft issues' of information security (those including, e.g., humans, organizations, culture, ethics, policies, and law) and more technical issues. Because of this it is also suitable for various analytical purposes, such as analysing possible security breaches, or for studying conflicting attitudes on security in an organization. The need for a new definition is demonstrated by pointing to a number of problems for the standard definition type of information security-the so-called CIA definition. Besides being too broad as well as too narrow, it cannot properly handle the soft issues of information security, nor recognize the contextual and normative nature of security.

An Evaluation of the Employee Training and Development Process for Nicolet Area Technical College's Basic Education Program.

ERIC Educational Resources Information Center

Karl, Luis C.

The adult basic education (ABE) program at Nicolet Area Technical College (NATC) evaluated its training and development (T&D) process for new basic education instructors. The study gathered monitoring and screening criteria that addressed valuable components for use in an instrument for validating effectiveness of the ABE program (T&D)…

A review of second law techniques applicable to basic thermal science research

NASA Astrophysics Data System (ADS)

Drost, M. Kevin; Zamorski, Joseph R.

1988-11-01

This paper reports the results of a review of second law analysis techniques which can contribute to basic research in the thermal sciences. The review demonstrated that second law analysis has a role in basic thermal science research. Unlike traditional techniques, second law analysis accurately identifies the sources and location of thermodynamic losses. This allows the development of innovative solutions to thermal science problems by directing research to the key technical issues. Two classes of second law techniques were identified as being particularly useful. First, system and component investigations can provide information of the source and nature of irreversibilities on a macroscopic scale. This information will help to identify new research topics and will support the evaluation of current research efforts. Second, the differential approach can provide information on the causes and spatial and temporal distribution of local irreversibilities. This information enhances the understanding of fluid mechanics, thermodynamics, and heat and mass transfer, and may suggest innovative methods for reducing irreversibilities.

Supplementing Tribal Culture Using Technical Writing Basics

ERIC Educational Resources Information Center

Tichenor, Stuart

2008-01-01

Using technical writing basics, a cohort of Lighthorse Police Officers from the Muscogee (Creek) Nation added to their tribe's cultural history by recording part of their family and clan history as well as documenting their law enforcement careers and education.

Technical issues in the conduct of large space platform experiments in plasma physics and geoplasma sciences

NASA Technical Reports Server (NTRS)

Szuszczewicz, Edward P.

1986-01-01

Large, permanently-manned space platforms can provide exciting opportunities for discoveries in basic plasma and geoplasma sciences. The potential for these discoveries will depend very critically on the properties of the platform, its subsystems, and their abilities to fulfill a spectrum of scientific requirements. With this in mind, the planning of space station research initiatives and the development of attendant platform engineering should allow for the identification of critical science and technology issues that must be clarified far in advance of space station program implementation. An attempt is made to contribute to that process, with a perspective that looks to the development of the space station as a permanently-manned Spaceborne Ionospheric Weather Station. The development of this concept requires a synergism of science and technology which leads to several critical design issues. To explore the identification of these issues, the development of the concept of an Ionospheric Weather Station will necessarily touch upon a number of diverse areas. These areas are discussed.

Establishment of a National Wind Energy Center at University of Houston

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Su Su

The DOE-supported project objectives are to: establish a national wind energy center (NWEC) at University of Houston and conduct research to address critical science and engineering issues for the development of future large MW-scale wind energy production systems, especially offshore wind turbines. The goals of the project are to: (1) establish a sound scientific/technical knowledge base of solutions to critical science and engineering issues for developing future MW-scale large wind energy production systems, (2) develop a state-of-the-art wind rotor blade research facility at the University of Houston, and (3) through multi-disciplinary research, introducing technology innovations on advanced wind-turbine materials, processing/manufacturingmore » technology, design and simulation, testing and reliability assessment methods related to future wind turbine systems for cost-effective production of offshore wind energy. To achieve the goals of the project, the following technical tasks were planned and executed during the period from April 15, 2010 to October 31, 2014 at the University of Houston: (1) Basic research on large offshore wind turbine systems (2) Applied research on innovative wind turbine rotors for large offshore wind energy systems (3) Integration of offshore wind-turbine design, advanced materials and manufacturing technologies (4) Integrity and reliability of large offshore wind turbine blades and scaled model testing (5) Education and training of graduate and undergraduate students and post- doctoral researchers (6) Development of a national offshore wind turbine blade research facility The research program addresses both basic science and engineering of current and future large wind turbine systems, especially offshore wind turbines, for MW-scale power generation. The results of the research advance current understanding of many important scientific issues and provide technical information for solving future large wind turbines with advanced design, composite materials, integrated manufacturing, and structural reliability and integrity. The educational program have trained many graduate and undergraduate students and post-doctoral level researchers to learn critical science and engineering of wind energy production systems through graduate-level courses and research, and participating in various projects in center’s large multi-disciplinary research. These students and researchers are now employed by the wind industry, national labs and universities to support the US and international wind energy industry. The national offshore wind turbine blade research facility developed in the project has been used to support the technical and training tasks planned in the program to accomplish their goals, and it is a national asset which is available for used by domestic and international researchers in the wind energy arena.« less

Index of NACA Technical Publications: June, 1955 - June, 1956

NASA Technical Reports Server (NTRS)

1956-01-01

This Index of NACA Technical Publications covers those NACA research reports issued in the period of June 1955 through June 1956. It is the fifth supplement to the basic 1919-1949 Index. The res ear c h reports issued prior to June 1955 which have been declassified since that date have also been included. In addition, current announcement of newly declassified materials is regularly made in the NACA Research Abstracts and Reclassification Notice. The arrangement of the present Index follows that of its predecessors: (1) A listing of the subject categories by numerical classifications, (2) a chronological listing of the NACA research reports under each subject category, (3) an aIphabe ic a I index to the subject categories, and (4) an author index. An Explanatory Chart on page iii may be helpful in identifying references to NACA research reports encountered in the literature. Entries included herein duplicate in part the information of the index cards furnished with the individual research reports. Recipients maintaining card fiIes may wish to discard those index cards on hand for unclassified research reports issued during the June 1955-June 1956 period. Newly available research reports are currently announced in the NACA Research Abstracts and Reclassification Notice and are normally available for a period of five years after announcement. Most of the older research reports (those issued prior to May 1951) are thus available on a "loan only" basis within the United States

Unresolved Technical Issues in Fair Interest Measurement.

ERIC Educational Resources Information Center

Cole, Nancy S.

The problem of sex differences in interest measurement involves many technical issues and procedures. The purpose of this paper is to provide a description of the technical problems involved in construction, scoring, and interpretation of interest measures as related to sex differences and to suggest guidelines within these technical issues which…

75 FR 74713 - Reliability Monitoring, Enforcement and Compliance Issues; Notice Allowing Post-Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-01

... Monitoring, Enforcement and Compliance Issues; Notice Allowing Post-Technical Conference Comments November 23... Commission-led technical conference to explore issues associated with reliability monitoring, enforcement and...- 000, on or before December 9, 2010. \\1\\ Reliability Monitoring, Enforcement and Compliance Issues...

[Platforms are needed for innovative basic research in ophthalmology].

PubMed

Wang, Yi-qiang

2012-07-01

Basic research poses the cornerstone of technical innovation in all lines including medical sciences. Currently, there are shortages of professional scientists as well as technical supporting teams and facilities in the field of basic research of ophthalmology and visual science in China. Evaluation system and personnel policies are not supportive for innovative but high-risk-of-failure research projects. Discussion of reasons and possible solutions are given here to address these problems, aiming at promoting buildup of platforms hosting novel and important basic research in eye science in this country.

Dual-Energy CT: New Horizon in Medical Imaging

PubMed Central

Goo, Jin Mo

2017-01-01

Dual-energy CT has remained underutilized over the past decade probably due to a cumbersome workflow issue and current technical limitations. Clinical radiologists should be made aware of the potential clinical benefits of dual-energy CT over single-energy CT. To accomplish this aim, the basic principle, current acquisition methods with advantages and disadvantages, and various material-specific imaging methods as clinical applications of dual-energy CT should be addressed in detail. Current dual-energy CT acquisition methods include dual tubes with or without beam filtration, rapid voltage switching, dual-layer detector, split filter technique, and sequential scanning. Dual-energy material-specific imaging methods include virtual monoenergetic or monochromatic imaging, effective atomic number map, virtual non-contrast or unenhanced imaging, virtual non-calcium imaging, iodine map, inhaled xenon map, uric acid imaging, automatic bone removal, and lung vessels analysis. In this review, we focus on dual-energy CT imaging including related issues of radiation exposure to patients, scanning and post-processing options, and potential clinical benefits mainly to improve the understanding of clinical radiologists and thus, expand the clinical use of dual-energy CT; in addition, we briefly describe the current technical limitations of dual-energy CT and the current developments of photon-counting detector. PMID:28670151

Mask industry assessment: 2008

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2008-10-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH and administered by David Powell Consulting to gather information about the mask industry as an objective assessment of its overall condition. The survey is designed with the input of semiconductor company mask technologists, merchant mask suppliers, and industry equipment makers. This year's assessment is the seventh in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey is basically the same as the 2005 through 2007 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that create a detailed profile of both the business and technical status of the critical mask industry.

Mask industry assessment trend analysis: 2010

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2010-05-01

Microelectronics industry leaders consistently cite the cost and cycle time of mask technology and mask supply as top critical issues. A survey was designed with input from semiconductor company mask technologists and merchant mask suppliers and support from SEMATECH to gather information about the mask industry as an objective assessment of its overall condition. This year's assessment was the eighth in the current series of annual reports. Its data were presented in detail at BACUS, and the detailed trend analysis is presented at EMLC. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. Its results will be used to guide future investments on critical path issues. This year's survey is basically the same as the surveys in 2005 through 2009. Questions are grouped into six categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that creates a detailed profile of both the business and technical status of the critical mask industry.

The 2002 to 2010 mask survey trend analysis

NASA Astrophysics Data System (ADS)

Hughes, Greg; Chan, David

2011-03-01

Microelectronics industry leaders consistently cite the cost and cycle time of mask technology and mask supply as top critical issues. A survey was designed with input from semiconductor company mask technologists and merchant mask suppliers and support from SEMATECH to gather information about the mask industry as an objective assessment of its overall condition. This year's assessment was the ninth in the current series of annual reports. Its data were presented in detail at BACUS, and the detailed trend analysis is presented at EMLC. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. Results will be used to guide future investments in critical path issues. This year's survey is basically the same as the 2005 through 2010 surveys. Questions are grouped into six categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that ultimately create a detailed profile of both the business and technical status of the critical mask industry.

Towards Dynamic Authentication in the Grid — Secure and Mobile Business Workflows Using GSet

NASA Astrophysics Data System (ADS)

Mangler, Jürgen; Schikuta, Erich; Witzany, Christoph; Jorns, Oliver; Ul Haq, Irfan; Wanek, Helmut

Until now, the research community mainly focused on the technical aspects of Grid computing and neglected commercial issues. However, recently the community tends to accept that the success of the Grid is crucially based on commercial exploitation. In our vision Foster's and Kesselman's statement "The Grid is all about sharing." has to be extended by "... and making money out of it!". To allow for the realization of this vision the trust-worthyness of the underlying technology needs to be ensured. This can be achieved by the use of gSET (Gridified Secure Electronic Transaction) as a basic technology for trust management and secure accounting in the presented Grid based workflow. We present a framework, conceptually and technically, from the area of the Mobile-Grid, which justifies the Grid infrastructure as a viable platform to enable commercially successful business workflows.

[Current status and prospect of translational medicine in nanotechnology].

PubMed

Gao, Guang-yu; Chen, Mei-ling; Li, Ming-yuan; Yang, Zhen-bo; Li, Zhi-ping; Mei, Xing-guo

2015-08-01

Nowadays, nanotechnologies have shown wide application foreground in the biomedical field of medicine laboratory tests, drug delivery, gene therapy and bioremediation. However, in recent years, nanomaterials have been labeled poisonous, because of the disputes and misunderstandings of mainstream views on their safety. Besides, for the barriers of technical issues in preparation like: (1) low efficacy (poor PK & PD and low drug loading), (2) high cost (irreproducibility and difficulty in scale up), little of that research has been successfully translated into commercial products. Currently, along with the new theory of "physical damage is the origin of nanotoxicity", biodegradability and biocompatibility of nanomaterials are listed as the basic principle of safe application of nanomaterials. Combining scientific design based on molecular level with precision control of process engineering will provide a new strategy to overcome the core technical challenges. New turning point of translational medicine in nanotechnology may emerge.

Using Scientific and Industrial Films in Teaching Technical Communication.

ERIC Educational Resources Information Center

Veeder, Gerry

A film course especially designed for technical communication students can illustrate basic film concepts and techniques while showing how film effectively communicates ideas in an industrial and scientific communication system. After a basic introduction to film terms, the study of actual scientific and industrial films demonstrates the following…

Vocational technical and adult education: Status, trends and issues related to electronic delivery

NASA Technical Reports Server (NTRS)

Rothenberg, D.

1973-01-01

Data are analyzed, and trends and issues are discussed to provide information useful to the systems designer who wishes to identify and assess the opportunities for large scale electronic delivery in vocational/technical and adult education. Issues connected with vocational/technical education are investigated, with emphasis on those issues in the current spotlight which are relevant to the possibilities of electronic delivery. The current role of media is examined in vocational/technical instruction.

Laser Propulsion - Quo Vadis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bohn, Willy L.

First, an introductory overview of the different types of laser propulsion techniques will be given and illustrated by some historical examples. Second, laser devices available for basic experiments will be reviewed ranging from low power lasers sources to inertial confinement laser facilities. Subsequently, a status of work will show the impasse in which the laser propulsion community is currently engaged. Revisiting the basic relations leads to new avenues in ablative and direct laser propulsion for ground based and space based applications. Hereby, special attention will be devoted to the impact of emerging ultra-short pulse lasers on the coupling coefficient andmore » specific impulse. In particular, laser sources and laser propulsion techniques will be tested in microgravity environment. A novel approach to debris removal will be discussed with respect to the Satellite Laser Ranging (SRL) facilities. Finally, some non technical issues will be raised aimed at the future prospects of laser propulsion in the international community.« less

Preparing manuscript: Scientific writing for publication.

PubMed

Bajwa, Sukhminder Jit Singh; Sawhney, Chhavi

2016-09-01

Publication has become a burning issue among Indian medical fraternity owing to certain academic and professional necessities. The large number of submissions to the anaesthesia journals has resulted in accumulation of too much below average scientific material. A properly written manuscript is the dream of every editor and reviewer. The art of preparing a manuscript can be acquired only by following certain basic rules and technical aspects, besides knowledge and skills. Before preparing the manuscript, a target journal should be considered. All the instructions to the authors pertaining to that particular journal should be followed meticulously before preparing the manuscript for submission. The basic structure of the manuscript to be followed can be summarised by the acronym IMRaD (introduction, methods, results and discussion). The current review article aims to highlight all those mandatory and desirable features which should be kept in consideration while preparing a scientific manuscript for publication.

Experimental design, power and sample size for animal reproduction experiments.

PubMed

Chapman, Phillip L; Seidel, George E

2008-01-01

The present paper concerns statistical issues in the design of animal reproduction experiments, with emphasis on the problems of sample size determination and power calculations. We include examples and non-technical discussions aimed at helping researchers avoid serious errors that may invalidate or seriously impair the validity of conclusions from experiments. Screen shots from interactive power calculation programs and basic SAS power calculation programs are presented to aid in understanding statistical power and computing power in some common experimental situations. Practical issues that are common to most statistical design problems are briefly discussed. These include one-sided hypothesis tests, power level criteria, equality of within-group variances, transformations of response variables to achieve variance equality, optimal specification of treatment group sizes, 'post hoc' power analysis and arguments for the increased use of confidence intervals in place of hypothesis tests.

Equipment management user's handbook for property custodians

NASA Technical Reports Server (NTRS)

1993-01-01

The NASA Equipment Management User's Handbook for Property Custodians is issued as an instructional guide for personnel designated as property custodians and technical personnel involved in the acquisition, management, and use of NASA-owned equipment. This handbook provides general information and basic operational procedures for processing equipment transactions through the agency-wide NASA Equipment Management System (NEMS). Each NASA installation must prepare supplementary instructions for local requirements beyond the scope of NASA-wide policies and procedures contained herein, or as specified for local implementation in NHB 4200.1, 'NASA Equipment Management Manual.' NHB 4200.1 sets forth policy, uniform performance standards, and procedural guidance to NASA personnel for the acquisition, management, and use of NASA-owned equipment. This handbook is a controlled document, issued in loose-leaf form and revised by page changes. Additional copies for internal use may be obtained through normal distribution.

Universities Earth System Scientists Program

NASA Technical Reports Server (NTRS)

Estes, John E.

1995-01-01

This document constitutes the final technical report for the National Aeronautics and Space Administration (NASA) Grant NAGW-3172. This grant was instituted to provide for the conduct of research under the Universities Space Research Association's (USRA's) Universities Earth System Scientist Program (UESSP) for the Office of Mission to Planet Earth (OMTPE) at NASA Headquarters. USRA was tasked with the following requirements in support of the Universities Earth System Scientists Programs: (1) Bring to OMTPE fundamental scientific and technical expertise not currently resident at NASA Headquarters covering the broad spectrum of Earth science disciplines; (2) Conduct basic research in order to help establish the state of the science and technological readiness, related to NASA issues and requirements, for the following, near-term, scientific uncertainties, and data/information needs in the areas of global climate change, clouds and radiative balance, sources and sinks of greenhouse gases and the processes that control them, solid earth, oceans, polar ice sheets, land-surface hydrology, ecological dynamics, biological diversity, and sustainable development; (3) Evaluate the scientific state-of-the-field in key selected areas and to assist in the definition of new research thrusts for missions, including those that would incorporate the long-term strategy of the U.S. Global Change Research Program (USGCRP). This will, in part, be accomplished by study and evaluation of the basic science needs of the community as they are used to drive the development and maintenance of a global-scale observing system, the focused research studies, and the implementation of an integrated program of modeling, prediction, and assessment; and (4) Produce specific recommendations and alternative strategies for OMTPE that can serve as a basis for interagency and national and international policy on issues related to Earth sciences.

Basic Skills Assessment Program. Technical Report.

ERIC Educational Resources Information Center

Los Angeles County Superintendent of Schools, CA.

This is the second technical report on the Basic Skills Assessment Program for the Department of Defense Dependents Schools (DoDDS). The report includes a summary of 1979-80 testing activities organized into five chapters. The first chapter provides an overview of report contents and a brief history of the testing program. The second chapter…

Cluster: Drafting. Course: Basic Technical Drafting. Research Project.

ERIC Educational Resources Information Center

Sanford - Lee County Schools, NC.

The set of six units is designed for use with an instructor in basic technical drafting and is also keyed to other texts. Each unit contains several task packages specifying prerequisites, rationale for learning, objectives, learning activities to be supervised by the instructor, and learning practice. The units cover: pictorial drawing; screw…

Integrated Basic Education and Skills Training (I-BEST). Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2014

2014-01-01

Washington's Integrated Basic Education and Skills Training Program (I-BEST) quickly teaches students literacy, work, and college-readiness skills so they can move through school and into living wage jobs faster. Pioneered by Washington's community and technical colleges, I-BEST uses a team-teaching approach to combine college-readiness classes…

Index of NACA Technical Publications, July 1956 - June 1957

NASA Technical Reports Server (NTRS)

1957-01-01

This index of NACA Technical Publications covers the NACA research reports issued in the period of July 1956 through June 1957. It is the sixth supplement to the basic 1915-1949 Index. The research reports issued prior to July 1956 which have been declassified since that date have also been included. A list of these reports may be found on pages 243-244. Cards for this list may be discarded as entries for them are included in this Index. Current announcement of newly declassified materials is regularly made in the NACA Research Abstracts and Reclassification Notice. The arrangement of this Index follows: (1) Explanatory chart of NACA publications series designations, (2) outline of subject classification system, (3) chronological list of NACA reports under each subject classification, (4) list of reports declassified from July 1956 through June 1957, (5) alphabetical index to subject categories, and (6) author index. Entries included herein duplicate in part the information of the index cards furnished with the individual research reports. Recipients maintaining card files may wish to discard those index cards on hand for unclassified research reports issued during the July 1956-June 1957 period. Such cards were printed on yellow stock for easy identification in the discard process. Please note that some classified reports issued during the July-December 1956 period are included in the yellow stock area. Therefore care must be taken to avoid destroying such cards. Newly available research reports are currently announced in the NACA Research Abstracts and Reclassification Notice and are normally available for a period of five years after announcement. Most of the older research reports (those issued prior to July 1952) are thus available on a "loan only" basis within the United states.

The political science of radioactive waste disposal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacobi, L.R. Jr.

1996-06-01

This paper was first presented at the annual meeting of the HPS in New Orleans in 1984. Twelve years later, the basic lessons learned are still found to be valid. In 1984, the following things were found to be true: A government agency is preferred by the public over a private company to manage radioactive waste. Semantics are important--How you say it is important, but how it is heard is more important. Public information and public relations are very important, but they are the last thing of concern to a scientist. Political constituency is important. Don`t overlook the need formore » someone to be on your side. Don`t forget that the media is part of the political process-they can make you or break you. Peer technical review is important, but so is citizen review. Sociology is an important issue that scientists and technical people often overlook. In summary, despite the political nature of radioactive waste disposal, it is as true today as it was in 1984 that technical facts must be used to reach sound technical conclusions. Only then, separately and openly, should political factors be considered. So, what can be said today that wasn`t said in 1984? Nothing. {open_quotes}It`s deja vu all over again.{close_quotes}« less

Promoting Gender Parity in Basic Education: Lessons from a Technical Cooperation Project in Yemen

ERIC Educational Resources Information Center

Yuki, Takako; Mizuno, Keiko; Ogawa, Keiichi; Mihoko, Sakai

2013-01-01

Many girls are not sent to school in Yemen, despite basic education being free as well as compulsory for all children aged 6-15. Aiming to improve girls' enrollment by increasing parental and community involvement, the Japan International Cooperation Agency (JICA) offered a technical cooperation project in June 2005 called Broadening Regional…

Fieldcrest Cannon, Inc. Advanced Technical Preparation. Statistical Process Control (SPC). PRE-SPC I. Instructor Book.

ERIC Educational Resources Information Center

Averitt, Sallie D.

This instructor guide, which was developed for use in a manufacturing firm's advanced technical preparation program, contains the materials required to present a learning module that is designed to prepare trainees for the program's statistical process control module by improving their basic math skills and instructing them in basic calculator…

Sociometric Clique Identification. Final Report.

ERIC Educational Resources Information Center

Kadushin, Charles

This report consists of four parts. The first part is a non-technical summary of the basic problem and an attempted solution. The second part is a technical review of the literature and a description of the basic algorithm used in the solution. The third part describes the use of the Sociogram System. The fourth part describes the use of CHAIN, a…

Relevance in Basic Composition: Writing Assignments for Technical Students.

ERIC Educational Resources Information Center

Tichenor, Stuart

Generally, students in vocational and technical colleges are in writing classes because they must be, not because they want to be. As a rule, students in basic composition classes have been more or less continually exposed to writing classes since middle school where they been asked to keep journals, read articles and short stories, and write…

Fundamental dilemmas in contemporary psychotherapy: a transtheoretical concept.

PubMed

Scaturo, Douglas J

2002-01-01

The transtheoretical nature of fundamental dilemmas in contemporary psychotherapy is explored. The basic distinction between technical and ethical dilemmas in clinical practice is discussed, as well as the ramifications for the psychotherapist. Clinical dilemmas identified by survey research studies and interviews with master psychotherapists are reviewed. In addition to dilemmas relevant to circumscribed areas of psychotherapy, such as brief therapy, managed mental health care, sexual questions, feminist therapy, dilemmas fundamental to the psychotherapeutic process as a whole are examined. Finally, clinical examples are provided that include such issues as hospitalization of the suicidal patient, dealing with known contraindications, treating the intractable patient, and self-care of the psychotherapist.

Training the Technical Editor.

ERIC Educational Resources Information Center

Cathcart, Margaret E.

The demand for skilled technical editors is growing as society places increasing emphasis on receiving accurate, concise, and complete technical data. Since many organizations do not have inhouse programs for training technical editors, a need exists to provide inexperienced people with basic editing skills. One organization has developed two…

Basic Microsurgery Training Using the Laboratory Rat (Rattus norvegicus)

DTIC Science & Technology

2018-03-01

all information . Use additional pages if necessary.) PROTOCOL #: FDG20170016A DATE: 1 March 2018 PROTOCOL TITLE: “Basic Microsurgery Training...2018__ RYAN M. DIEPENBROCK, Lt Col, USAF, DC (Date) 3 FDG20170016A Attachments: Attachment 1: Defense Technical Information Center (DTIC) Abstract...Submission Attachment 1 Defense Technical Information Center (DTIC) Abstract Submission Objectives: The purpose of this course is to

European consensus conference on faecal microbiota transplantation in clinical practice

PubMed Central

Cammarota, Giovanni; Ianiro, Gianluca; Tilg, Herbert; Rajilić-Stojanović, Mirjana; Kump, Patrizia; Satokari, Reetta; Sokol, Harry; Arkkila, Perttu; Pintus, Cristina; Hart, Ailsa; Segal, Jonathan; Aloi, Marina; Masucci, Luca; Molinaro, Antonio; Scaldaferri, Franco; Gasbarrini, Giovanni; Lopez-Sanroman, Antonio; Link, Alexander; de Groot, Pieter; de Vos, Willem M; Högenauer, Christoph; Malfertheiner, Peter; Mattila, Eero; Milosavljević, Tomica; Nieuwdorp, Max; Sanguinetti, Maurizio; Simren, Magnus; Gasbarrini, Antonio

2017-01-01

Faecal microbiota transplantation (FMT) is an important therapeutic option for Clostridium difficile infection. Promising findings suggest that FMT may play a role also in the management of other disorders associated with the alteration of gut microbiota. Although the health community is assessing FMT with renewed interest and patients are becoming more aware, there are technical and logistical issues in establishing such a non-standardised treatment into the clinical practice with safety and proper governance. In view of this, an evidence-based recommendation is needed to drive the practical implementation of FMT. In this European Consensus Conference, 28 experts from 10 countries collaborated, in separate working groups and through an evidence-based process, to provide statements on the following key issues: FMT indications; donor selection; preparation of faecal material; clinical management and faecal delivery and basic requirements for implementing an FMT centre. Statements developed by each working group were evaluated and voted by all members, first through an electronic Delphi process, and then in a plenary consensus conference. The recommendations were released according to best available evidence, in order to act as guidance for physicians who plan to implement FMT, aiming at supporting the broad availability of the procedure, discussing other issues relevant to FMT and promoting future clinical research in the area of gut microbiota manipulation. This consensus report strongly recommends the implementation of FMT centres for the treatment of C. difficile infection as well as traces the guidelines of technicality, regulatory, administrative and laboratory requirements. PMID:28087657

Focus on Basics: Connecting Research & Practice. Volume 8, Issue D

ERIC Educational Resources Information Center

Garner, Barbara, Ed.

2007-01-01

Learning disabilities is the theme of the latest issue of "Focus on Basics," the World Education publication that brings together research, policy, and practice in adult basic education. Starting with an update on research on neurobiology and dyslexia, this issue also examines how the adult basic education system supports students with…

Mask industry assessment trend analysis

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2009-01-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH to gather information about the mask industry as an objective assessment of its overall condition. This year's survey data were presented in detail at BACUS and the detailed trend analysis presented at EMLC. The survey is designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the seventh in the current series of annual reports. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments on critical path issues. This year's survey is basically the same as the surveys in 2005 through 2007. Questions are grouped into seven categories: General Business Profile Information, Data Processing, Yields and Yield Loss, Mechanisms, Delivery Times, Returns, and Services. (Examples are given below). Within each category is a multitude of questions that creates a detailed profile of both the business and technical status of the critical mask industry.

Mask industry assessment: 2009

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2009-10-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH and administered by David Powell Consulting to gather information about the mask industry as an objective assessment of its overall condition. The survey is designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the eighth in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey is basically the same as the 2005 through 2008 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that create a detailed profile of both the business and technical status of the critical mask industry. This in combination with the past surveys represents a comprehensive view of changes in the industry.

Mask industry assessment trend analysis: 2012

NASA Astrophysics Data System (ADS)

Chan, Y. David

2012-02-01

Microelectronics industry leaders consistently cite the cost and cycle time of mask technology and mask supply among the top critical issues for lithography. A survey was designed by SEMATECH with input from semiconductor company mask technologists and merchant mask suppliers to objectively assess the overall conditions of the mask industry. With the continued support of the industry, this year's assessment was the tenth in the current series of annual reports. This year's survey is basically the same as the 2005 through 2011 surveys. Questions are grouped into six categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that ultimately produce a detailed profile of both the business and technical status of the critical mask industry. We received data from 11 companies this year, which was a record high since the beginning of the series. The responding companies represented more than 96% of the volume shipped and about 90% of the 2011 revenue for the photomask industry. These survey reports are often used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. They will continue to serve as a valuable reference to identify strengths and opportunities. Results can also be used to guide future investments in critical path issues.

Naval Training Device Center Index of Technical Reports.

ERIC Educational Resources Information Center

Walker, Lemuel E.

Published Naval Training Device Center technical reports and some technical notes (those available through the Defense Documentation Center-DDC) which have resulted from basic research, exploratory development, and advanced development type projects are listed. The reports are indexed by technical note number, by title, and by contractor code. The…

Basic Machines - The "Nuts and Bolts" of Technical Physics Minicourse, Career Oriented Pre-Technical Physics. Preliminary Edition.

ERIC Educational Resources Information Center

Bullock, Bob; And Others

This minicourse was prepared for use with secondary physics students in the Dallas Independent School District and is one option in a physics program which provides for the selection of topics on the basis of student career needs and interests. This minicourse was aimed at two levels in the study of basic machines. The "light" level…

48 CFR 2452.237-73 - Conduct of Work and Technical Guidance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... conditions of the contract. (c) The GTR will issue technical guidance in writing or, if issued orally, he/she... Technical Guidance. 2452.237-73 Section 2452.237-73 Federal Acquisition Regulations System DEPARTMENT OF... Provisions and Clauses 2452.237-73 Conduct of Work and Technical Guidance. As prescribed in 2437.110(d...

Gender Issues in Technical Communication Studies: An Overview of the Implications for the Profession, Research, and Pedagogy.

ERIC Educational Resources Information Center

Allen, Jo

1991-01-01

Presents an overview of research and unanswered questions related to gender issues in technical communication. Addresses the consequences of the feminization of technical communication, research on gender differences in technical communication, and the means for encouraging a more gender-balanced view of business and industry. (SR)

Study of a wind energy conversion system in New Hampshire

NASA Astrophysics Data System (ADS)

Lockwood, J.; Kraft, G.; Pregent, G.; Smukler, L.

1981-08-01

Concern over conventional energy costs and supplies is currently strong, particularly in New England region where eighty percent of the total energy is oil based; furthermore, forty percent of this region's total energy is OPEC oil. These figures contrast with national averages of forty-seven and thirteen percent, respectively (1). The quest to develop alternative and renewable energy sources indigenous to New England is understandable in light of these figures. The wind is one such source. The study of wind energy can be divided into three basic areas; these are technical, legal-institutional, and financial. The technical area encompasses collection and analysis of wind data, selection and installation of wind turbines and peripheral equipment, and operation and maintenance. The legal-institutional area encompasses the resolution of such issues as land use policies, power contracts, and state and federal regulations. The financial area encompasses the examination of investment opportunities made available by various site-machine combinations and the selling of such opportunities to the investment community.

Participatory ergonomics and design of technical assistance.

PubMed

Rodríguez, Claudia Isabel Rojas

2012-01-01

This work describes the experience of application of a procedural initiative, which aimed to identify and address technical assistance needs progressively in therapy and rehabilitation activities. The proposal theoretical axes are the basics of participatory ergonomics and interdisciplinary work, was raised with the intention of addressing important issues for the entire design process including: perception, attention, memory and human being comfort, and the interrelationships that create objects in the context in which they are used. This project was done in collaboration with leading institutes for the rehabilitation of Colombia: Cirec and Roosevelt, through two investigative stages: a first ethnographic stage, during which were observed one hundred forty four (144) procedures of rehabilitation and therapy to build a bank of assistive technology needs, justified on the project observation variables. And a second stage of action research in which they were designed elements that facilitate the implementation of rehabilitation procedures efficiently. Currently being developed experiential situations in different hospitals to examine the reliability of the proposed solutions.

Expansion Policy of Secondary Technical Education as a Correlate to the Acquisition of Basic Technical Skills by Students in Cameroon

ERIC Educational Resources Information Center

Efande, Lyonga John

2015-01-01

This study aims at investigating the relationship between the expansion of secondary Technical Education on the acquisition of technical skills by students. Technical Vocational Education and Training (TVET) has been expanding quantitatively yearly without paying enough attention to its adverse effect on quality and the acquisition of the…

Astronomy Village Reaches for New Heights

NASA Astrophysics Data System (ADS)

Croft, S. K.; Pompea, S. M.

2007-12-01

We are developing a set of complex, multimedia-based instructional modules emphasizing technical and scientific issues related to Giant Segmented Mirror Telescope project. The modules" pedagogy will be open-ended and problem-based to promote development of problem-solving skills. Problem- based-learning modules that emphasize work on open-ended complex real world problems are particularly valuable in illustrating and promoting a perspective on the process of science and engineering. Research in this area shows that these kinds of learning experiences are superior to more conventional student training in terms of gains in student learning. The format for the modules will be based on the award-winning multi-media educational Astronomy Village products that present students with a simulated environment: a mountaintop community surrounded by a cluster of telescopes, satellite receivers, and telecommunication towers. A number of "buildings" are found in the Village, such as a library, a laboratory, and an auditorium. Each building contains an array of information sources and computer simulations. Students navigate through their research with a mentor via imbedded video. The first module will be "Observatory Site Selection." Students will use astronomical data, basic weather information, and sky brightness data to select the best site for an observatory. Students will investigate the six GSMT sites considered by the professional site selection teams. Students will explore weather and basic site issues (e.g., roads and topography) using remote sensing images, computational fluid dynamics results, turbulence profiles, and scintillation of the different sites. Comparison of student problem solving with expert problem solving will also be done as part of the module. As part of a site selection team they will have to construct a case and present it on why they chose a particular site. The second module will address aspects of system engineering and optimization for a GSMT-like telescope. Basic system issues will be addressed and studied. These might include various controls issues and optimization issues such as mirror figure, mirror support stability, and wind loading trade-offs. Using system modeling and system optimization results from existing and early GSMT trade studies, we will create a simulation where students are part of an engineering design and optimization team. They will explore the cost/performance/schedule issues associate with the GSMT design.

Cellular therapies for heart disease: unveiling the ethical and public policy challenges.

PubMed

Raval, Amish N; Kamp, Timothy J; Hogle, Linda F

2008-10-01

Cellular therapies have emerged as a potential revolutionary treatment for cardiovascular disease. Promising preclinical results have resulted in a flurry of basic research activity and spawned multiple clinical trials worldwide. However, the optimal cell type and delivery mode have not been determined for target patient populations. Nor have the mechanisms of benefit for the range of cellular interventions been clearly defined. Experiences to date have unveiled a myriad of ethical and public policy challenges which will affect the way researchers and clinicians make decisions for both basic and clinical research. Stem cells derived from embryos are at the forefront of the ethical and political debate, raising issues of which derivation methods are morally and socially permissible to pursue, as much as which are technically feasible. Adult stem cells are less controversial; however, important challenges exist in determining study design, cell processing, delivery mode, and target patient population. Pathways to successful commercialization and hence broad accessibility of cellular therapies for heart disease are only beginning to be explored. Comprehensive, multi-disciplinary and collaborative networks involving basic researchers, clinicians, regulatory officials and policymakers are required to share information, develop research, regulatory and policy standards and enable rational and ethical cell-based treatment approaches.

Transcranial electric stimulation (tES) and NeuroImaging: the state-of-the-art, new insights and prospects in basic and clinical neuroscience.

PubMed

Soekadar, Surjo R; Herring, Jim Don; McGonigle, David

2016-10-15

Transcranial electric stimulation (tES) of the brain has attracted an increased interest in recent years. Yet, despite remarkable research efforts to date, the underlying neurobiological mechanisms of tES' effects are still incompletely understood. This Special Issue aims to provide a comprehensive and up-to-date overview of the state-of-the-art in studies combining tES and neuroimaging, while introducing most recent insights and outlining future prospects related to this new and rapidly growing field. The findings reported here combine methodological advancements with insights into the underlying mechanisms of tES itself. At the same time, they also point to the many caveats and specific challenges associated with such studies, which can arise from both technical and biological sources. Besides promising to advance basic neuroscience, combined tES and neuroimaging studies may also substantially change previous conceptions about the methods of action of electric or magnetic stimulation on the brain. Copyright © 2016. Published by Elsevier Inc.

Preface to the focus section on injection-induced seismicity

USGS Publications Warehouse

Eaton, David; Rubinstein, Justin L.

2015-01-01

The ongoing, dramatic increase in seismicity in the central United States that began in 2009 is believed to be the result of injection‐induced seismicity (Ellsworth, 2013). Although the basic mechanism for activation of slip on a fault by subsurface fluid injection is well established (Healy et al., 1968; Raleighet al., 1976; Nicholson and Wesson, 1992; McGarr et al., 2002; Ellsworth, 2013), the occurrence of damaging M≥5 earthquakes and the dramatic increase in seismicity in the central United States has brought heightened attention to this issue. The elevated seismicity is confined to a limited number of areas, and accumulating evidence indicates that the seismicity in these locations is directly linked to nearby industrial operations. This Seismological Research Letters (SRL) focus section presents a selected set of seven technical papers that cover various aspects of this topic, including basic seismological and ground‐motion observations, case studies, numerical simulation of fault activation, and risk mitigation.

Synthetic Biology between Self-Regulation and Public Discourse: Ethical Issues and the Many Roles of the Ethicist.

PubMed

Arnason, Gardar

2017-04-01

This article discusses the roles of ethicists in the governance of synthetic biology. I am particularly concerned with the idea of self-regulation of bioscience and its relationship to public discourse about ethical issues in bioscience. I will look at the role of philosophical ethicists at different levels and loci, from the "embedded ethicist" in the laboratory or research project, to ethicists' impact on policy and public discourse. In a democratic society, the development of governance frameworks for emerging technologies, such as synthetic biology, needs to be guided by a well-informed public discourse. In the case of synthetic biology, the public discourse has to go further than merely considering technical issues of biosafety and biosecurity, or risk management, to consider more philosophical issues concerning the meaning and value of "life" between the natural and the synthetic. I argue that ethicists have moral expertise to bring to the public arena, which consists not only in guiding the debate but also in evaluating arguments and moral positions and making normative judgments. When ethicists make normative claims or moral judgments, they must be transparent about their theoretical positions and basic moral standpoints.

[Experience and discussion on the national standard Standardized Manipulation of Acupuncture and Moxibustion. Part 8: Intradermal Needle].

PubMed

Luo, Ling; Yuan, Cheng-Kai; Yin, Hai-Yan; Zeng, Fang; Tang, Yong; Yu, Shu-Guang

2012-02-01

Standardized Manipulation of Acupuncture and Moxibustion Part 8: Intradermal Needle was compiled with the following principles. The compiling standard, technical features and clinic manipulations of intradermal needle were taken as the basic principle for compiling. Literature research, expert survey and clinic practice verification were applied as the drafting methods. The key issues were focused on the relationship between standardization and individualization, normalization and effectiveness, qualification and quantification. And the postural selection, reinforcing and reducing manipulations, fixing materials and embedding duration involved in intradermal needling were emphasized particularly. At the same time, details and the future way of thinking of intradermal needle were expounded in this article as well.

Plasma RNA integrity analysis: methodology and validation.

PubMed

Wong, Blenda C K; Lo, Y M Dennis

2006-09-01

The detection of cell-free RNA in plasma and serum of human subjects has found increasing applications in the field of medical diagnostics. However, many questions regarding the biology of circulating RNA remain to be addressed. One issue concerns the molecular nature of these circulating RNA species. We have recently developed a simple and quantitative method to investigate the integrity of plasma RNA. Our results have suggested that cell-free RNA in plasma is generally present as fragmented molecules instead of intact transcripts, with a predominance of 5' fragments. In this article, we summarize the basic principles in the experimental design for plasma RNA integrity analysis and highlight some of the important technical considerations for this type of investigation.

Hydration: certain basic aspects for developing technical and scientific parameters into the nutrition knowledge

PubMed

Perales-García, Aránzazu; Estévez-Martínez, Isabel; Urrialde, Rafael

2016-07-12

Introduction: Hydration is defined as the water intake coming from food and beverages. Its study has become an area by itself, within the nutrition field. Meaning that in 2010 the European Food Safety Authority (EFSA) approved the water intake recommendations, but the study of this topic implies a rigorous methodology, which represents several issues. Objective: Showing as a glance the main methodological issues in hydration studies. Material and methods: Bibliographic revision of scientific literature. Results: The main methodological issues presented are: sample selection (investigation field and sample design), selection of the method to evaluate hydration status (dilution techniques, bioelectrical impedance, plasmatic and urinary indicators, changes in body composition, water losses and clinic symptoms) selection of the method to evaluate water intake (biomarker, questionnaires, informatics programs, smartphone use, 24-h register, dietary history and food frequency questionnaire), and the main sources of hydration. Conclusions: Hydration status should be understood as a routine model, with daily frequency, according to gender, age, physical activity and environmental conditions. Furthermore, the correct design of the methodology has a special importance in order to take into account all the aspects

Technical Preparation: Preparing Students for Success. A Position Paper Presented by the Wisconsin Association of Secondary Vocational Administrators 1991-1992.

ERIC Educational Resources Information Center

Peterson, Charlene; And Others

Technical Preparation (Tech Prep) programs include basic skills and competencies to improve students' school-to-work transition. The following elements characterize Tech Prep: designed for grades 9-14, leading to an technical associate degree; parallels college preparatory program; offers technical program of study in business enterprise,…

Technical Mathematics: Restructure of Technical Mathematics.

ERIC Educational Resources Information Center

Flannery, Carol A.

Designed to accompany a series of videotapes, this textbook provides information, examples, problems, and solutions relating to mathematics and its applications in technical fields. Chapter I deals with basic arithmetic, providing information on fractions, decimals, ratios, proportions, percentages, and order of operations. Chapter II focuses on…

Rote Learning in the Age of Technology: A Quantitative Study of a Career and Technical High School and the Practical Use of Basic Skills

ERIC Educational Resources Information Center

Cotreau Berube, Elyse A.

2011-01-01

The purpose of this quantitative research study was to investigate the use of rote learning in basic skills of mathematics and spelling of 12 high school students, from a career and technical high school, in an effort to learn if the pedagogy of rote fits in the frameworks of today's education. The study compared the accuracy of…

Low Cost Technical Solutions to Jump Start an Insider Threat Program

DTIC Science & Technology

2016-05-11

Low Cost Technical Solutions to Jump Start an Insider Threat Program George J. Silowash Derrick L. Spooner Daniel L. Costa Michael J...Albrethsen May 2016 TECHNICAL NOTE CMU/SEI-2016-TN-004 CERT Division http://www.sei.cmu.edu Copyright 2016 Carnegie Mellon University This... technical note will explore tools that may be suitable for satisfying the basic technical needs of an insider threat program, giving organizations a

Draft secure medical database standard.

PubMed

Pangalos, George

2002-01-01

Medical database security is a particularly important issue for all Healthcare establishments. Medical information systems are intended to support a wide range of pertinent health issues today, for example: assure the quality of care, support effective management of the health services institutions, monitor and contain the cost of care, implement technology into care without violating social values, ensure the equity and availability of care, preserve humanity despite the proliferation of technology etc.. In this context, medical database security aims primarily to support: high availability, accuracy and consistency of the stored data, the medical professional secrecy and confidentiality, and the protection of the privacy of the patient. These properties, though of technical nature, basically require that the system is actually helpful for medical care and not harmful to patients. These later properties require in turn not only that fundamental ethical principles are not violated by employing database systems, but instead, are effectively enforced by technical means. This document reviews the existing and emerging work on the security of medical database systems. It presents in detail the related problems and requirements related to medical database security. It addresses the problems of medical database security policies, secure design methodologies and implementation techniques. It also describes the current legal framework and regulatory requirements for medical database security. The issue of medical database security guidelines is also examined in detailed. The current national and international efforts in the area are studied. It also gives an overview of the research work in the area. The document also presents in detail the most complete to our knowledge set of security guidelines for the development and operation of medical database systems.

Basic Writing Concepts for Scientists and Engineers.

ERIC Educational Resources Information Center

Mitchell, John H.

1980-01-01

Notes the differences between poetry and technical communication. Charges English teacher/humanists with confusing students about emotional writing, style, and effective technical communication. Offers five concepts that technical writing teachers can use to place "style" on a rational basis and to make students understand the true purposes of…

Aligning Career and Technical Education

ERIC Educational Resources Information Center

Workman, Ed; Stubbs, Joyce

2011-01-01

The issues and concerns facing Kentucky Career and Technical Teacher Education (KY CTTE), university teacher educators and state department Career and Technical Education (CTE) leaders in providing and preparing the best CTE teachers possible are not unique to Kentucky. In an effort to better understand these issues and concerns a team of state…

30 CFR 750.25 - Permit fees.

Code of Federal Regulations, 2010 CFR

2010-07-01

... review fee with the permit application. (2) Technical review. Following receipt from OSM of a notice of administrative completeness, an applicant who pays by stage of review shall submit the technical review basic fee... area. (3) Permit issuance. Following receipt from OSM of a notice of technical adequacy, an applicant...

Technical Writing Tips

ERIC Educational Resources Information Center

Kennedy, Patrick M.

2004-01-01

The main reason engineers, technicians, and programmers write poor technical documents is because they have had little training or experience in that area. This article addresses some of the basics that students can use to master technical writing tasks. The article covers the most common problems writers make and offers suggestions for improving…

Fiberoptic characteristics for extreme operating environments

NASA Technical Reports Server (NTRS)

Delcher, R. C.

1992-01-01

Fiberoptics could offer several major benefits for cryogenic liquid-fueled rocket engines, including lightning immunity, weight reduction, and the possibility of implementing a number of new measurements for engine condition monitoring. The technical feasibility of using fiberoptics in the severe environments posed by cryogenic liquid-fueled rocket engines was determined. The issues of importance and subsequent requirements for this use of fiberoptics were compiled. These included temperature ranges, moisture embrittlement succeptability, and the ability to withstand extreme shock and vibration levels. Different types of optical fibers were evaluated and several types of optical fibers' ability to withstand use in cryogenic liquid-fueled rocket engines was demonstrated through environmental testing of samples. This testing included: cold-bend testing, moisture embrittlement testing, temperature cycling, temperature extremes testing, vibration testing, and shock testing. Three of five fiber samples withstood the tests to a level proving feasibility, and two of these remained intact in all six of the tests. A fiberoptic bundle was also tested, and completed testing without breakage. Preliminary cabling and harnessing for fiber protection was also demonstrated. According to cable manufacturers, the successful -300 F cold bend, vibration, and shock tests are the first instance of any major fiberoptic cable testing below roughly -55 F. This program has demonstrated the basic technical feasibility of implementing optical fibers on cryogenic liquid-fueled rocket engines, and a development plan is included highlighting requirements and issues for such an implementation.

75 FR 62534 - Reliability Monitoring, Enforcement and Compliance Issues; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-12

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD11-1-000] Reliability Monitoring, Enforcement and Compliance Issues; Notice of Technical Conference October 1, 2010. The Federal...-referenced proceeding to explore issues associated with reliability monitoring, enforcement and compliance...

27 CFR 1.35 - Authority to issue, amend, deny, suspend, revoke, or annul basic permits.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Authority to issue, amend, deny, suspend, revoke, or annul basic permits. 1.35 Section 1.35 Alcohol, Tobacco Products and Firearms... SALES AND BOTTLING OF DISTILLED SPIRITS Basic Permits Authorization § 1.35 Authority to issue, amend...

The role of structural dynamics in the design and operations of space systems: The history, the lessons, the technical challenges of the future

NASA Technical Reports Server (NTRS)

Ryan, Robert S.

1994-01-01

Structural dynamics and its auxiliary fields are the most progressive and challenging areas space system engineering design and operations face. Aerospace systems are dependent on structural dynamicists for their success. Past experiences (history) are colored with many dynamic issues, some producing ground or flight test failures. The innovation and creativity that was brought to these issues and problems are the aura from the past that lights the path to the future. Using this illumination to guide understanding of the dynamic phenomena and designing for its potential occurrence are the keys to successful space systems. Our great paradox, or challenge, is how we remain in depth specialists, yet become generalists to the degree that we make good team members and set the right priorities. This paper will deal with how we performed with acclaim in the past, the basic characteristics of structural dynamics (loads cycle, for example), and the challenges of the future.

Second International Workshop on Software Engineering and Code Design in Parallel Meteorological and Oceanographic Applications

NASA Technical Reports Server (NTRS)

OKeefe, Matthew (Editor); Kerr, Christopher L. (Editor)

1998-01-01

This report contains the abstracts and technical papers from the Second International Workshop on Software Engineering and Code Design in Parallel Meteorological and Oceanographic Applications, held June 15-18, 1998, in Scottsdale, Arizona. The purpose of the workshop is to bring together software developers in meteorology and oceanography to discuss software engineering and code design issues for parallel architectures, including Massively Parallel Processors (MPP's), Parallel Vector Processors (PVP's), Symmetric Multi-Processors (SMP's), Distributed Shared Memory (DSM) multi-processors, and clusters. Issues to be discussed include: (1) code architectures for current parallel models, including basic data structures, storage allocation, variable naming conventions, coding rules and styles, i/o and pre/post-processing of data; (2) designing modular code; (3) load balancing and domain decomposition; (4) techniques that exploit parallelism efficiently yet hide the machine-related details from the programmer; (5) tools for making the programmer more productive; and (6) the proliferation of programming models (F--, OpenMP, MPI, and HPF).

Towards a Consensus View on Understanding Nanomaterials Hazards and Managing Exposure: Knowledge Gaps and Recommendations

PubMed Central

Hunt, Geoffrey; Lynch, Iseult; Cassee, Flemming; Handy, Richard D.; Fernandes, Teresa F.; Berges, Markus; Kuhlbusch, Thomas A. J.; Dusinska, Maria; Riediker, Michael

2013-01-01

The aim of this article is to present an overview of salient issues of exposure, characterisation and hazard assessment of nanomaterials as they emerged from the consensus-building of experts undertaken within the four year European Commission coordination project NanoImpactNet. The approach adopted is to consolidate and condense the findings and problem-identification in such a way as to identify knowledge-gaps and generate a set of interim recommendations of use to industry, regulators, research bodies and funders. The categories of recommendation arising from the consensual view address: significant gaps in vital factual knowledge of exposure, characterisation and hazards; the development, dissemination and standardisation of appropriate laboratory protocols; address a wide range of technical issues in establishing an adequate risk assessment platform; the more efficient and coordinated gathering of basic data; greater inter-organisational cooperation; regulatory harmonization; the wider use of the life-cycle approaches; and the wider involvement of all stakeholders in the discussion and solution-finding efforts for nanosafety. PMID:28809359

Technical knowledge and skills development in the informal sector in Kenya: The case of custom tailors

NASA Astrophysics Data System (ADS)

Apunda, Edwinah Amondi; de Klerk, Helena M.; Ogina, Teresa

2017-06-01

Custom tailors working in the informal sector in Nairobi, Kenya, mainly acquire technical skills through undertaking traditional apprenticeships (TAs). However, most of these tailors are semi-skilled, produce low-quality products and are often poorer than their formally trained counterparts. This qualitative case study explores the aspects of technical skills and knowledge which tailoring apprentices develop, and the factors which influence these outcomes. The findings show that apprentices do acquire basic technical skills for immediate application to ongoing tailoring activities (such as how to take body measurements, draft patterns, and cut, sew and finish constructed garments). However, apprentices do not acquire the technical knowledge that underpins the trade. Most master tailors who have completed TAs lack technical knowledge and have no access to technical skills upgrading. This perpetuates the cycle of basic and limited technical skills transfer to apprentices, poor performance and poverty among tailors. Both apprentices and master tailors expressed concern over knowledge limitations in TAs and a need to access further training to improve skills and acquire knowledge of the trade. The authors of this article argue that, technically and pedagogically, skilled master tailors are critical to improving training quality. Complementary training in theoretical knowledge is also important in improving apprentices' technical skills and understanding of the trade. Inclusion of TAs in government policy may help ensure sustainable improvement of skills.

Project T.E.A.M. (Technical Education Advancement Modules). Fundementals of Workplace Integration.

ERIC Educational Resources Information Center

Kraeling, Vicki

This module is one of a series of instructional guides developed by Project TEAM (Technical Education Advancement Modules), a cooperative demonstration program for high technology training for unemployed, underemployed, and existing industrial employees whose basic technical skills are in need of upgrading. The module is a 27-hour overview course…

Project T.E.A.M. (Technical Education Advancement Modules). Introduction to Industrial Physics.

ERIC Educational Resources Information Center

Whisenhunt, James E.

This instructional guide, one of a series developed by the Technical Education Advancement Modules (TEAM) project, is a 20-hour introduction to industrial physics that explains and demonstrates to industrial maintenance mechanics the direct relationship of physics to machinery. Project TEAM is intended to upgrade basic technical competencies of…

Improving Technical Vocational Education and Training in the Kurdistan Region--Iraq

ERIC Educational Resources Information Center

Constant, Louay; Culbertson, Shelly; Stasz, Cathleen; Vernez, Georges

2014-01-01

As Iraq's Kurdistan region develops rapidly, it is creating jobs that require a solid education and technical skills. The government has launched an ambitious reform of basic and secondary education to increase its quality and has expanded opportunities for tertiary technical and university education. But expansion of secondary vocational…

Advanced Technical Drafting (Industrial Arts) Curriculum Guide. Bulletin 1751.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This curriculum guide contains materials for a 17-unit course in advanced technical drafting, a followup to the basic technical drafting course in the industrial arts curriculum for grades 10-12. It is intended for use by industrial arts teachers, supervisors, counselors, administrators, and teacher educators. A three-page course overview provides…

30 CFR 736.25 - Permit fees.

Code of Federal Regulations, 2010 CFR

2010-07-01

... application. (2) Technical review. Following receipt from OSM of a notice of administrative completeness, an applicant who pays by stage of review shall submit the technical review basic fee, plus the per-acre fee for.... Following receipt from OSM of a notice of technical adequacy, an applicant who pays by stage of review shall...

Socio-Technical Considerations for the Use of Blockchain Technology in Healthcare.

PubMed

Wong, Ming Chao; Yee, Kwang Chien; Nøhr, Christian

2018-01-01

Blockchain technology is often considered as the fourth industrial revolution that will change the world. The enthusiasm of the transformative nature of blockchain technology has infiltrated healthcare. Blockchain is often seen as the much needed and perfect technology for healthcare, addressing the difficult and complex issues of security and inter-operability. More importantly, the "value" and trust-based system can deliver automated action and response via its smart contract mechanism. Healthcare, however, is a complex system. Health information technology (HIT) so far, has not delivered its promise of transforming healthcare due to its complex socio-technical and context sensitive interaction. The introduction of blockchain technology will need to consider a whole range of socio-technical issues in order to improve the quality and safety of patient care. This paper presents a discussion on these socio-technical issues. More importantly, this paper argues that in order to achieve the best outcome from blockchain technology, there is a need to consider a clinical transformation from "information" to "value " and trust. This paper argues that urgent research is needed to address these socio-technical issues in order to facilitate best outcomes for blockchain in healthcare. These socio-technical issues must then be further evaluated by means of working prototypes in the medical domain in coming years.

Safety issues in high speed machining

NASA Astrophysics Data System (ADS)

1994-05-01

There are several risks related to High-Speed Milling, but they have not been systematically determined or studied so far. Increased loads by high centrifugal forces may result in dramatic hazards. Flying tools or fragments from a tool with high kinetic energy may damage surrounding people, machines and devices. In the project, mechanical risks were evaluated, theoretic values for kinetic energies of rotating tools were calculated, possible damages of the flying objects were determined and terms to eliminate the risks were considered. The noise levels of the High-Speed Machining center owned by the Helsinki University of Technology (HUT) and the Technical Research Center of Finland (VTT) in practical machining situation were measured and the results were compared to those after basic preventive measures were taken.

7 CFR 610.2 - Scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE Conservation Operations § 610.2 Scope. (a) Conservation operations, including technical assistance, is the basic soil and water conservation program of...

7 CFR 610.2 - Scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE Conservation Operations § 610.2 Scope. (a) Conservation operations, including technical assistance, is the basic soil and water conservation program of...

7 CFR 610.2 - Scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE Conservation Operations § 610.2 Scope. (a) Conservation operations, including technical assistance, is the basic soil and water conservation program of...

7 CFR 610.2 - Scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE Conservation Operations § 610.2 Scope. (a) Conservation operations, including technical assistance, is the basic soil and water conservation program of...

Provision of Earthquake Early Warning to the General Public and Necessary Preparatory Process in Japan

NASA Astrophysics Data System (ADS)

Tsukada, S.; Kamigaichi, O.; Saito, M.; Takeda, K.; Shimoyama, T.; Nakamura, K.; Kiyomoto, M.; Watanabe, Y.

2007-12-01

Earthquake early warning of JMA is to enable advance countermeasures to the strong motion disaster by providing expected seismic intensity and arrival time of the strong motion, as well as estimated hypocenter parameters, before the S wave arrival. However, due to its very short available time period, it is essential to well publicize the principle and technical limit of EEW, and proper actions to be taken when it is seen or heard, to utilize EEW effectively without causing unnecessary confusion. Accordingly, JMA decided to provide EEW in two steps. Namely, JMA started to provide EEW to a limited number of users who understand the technical limit of EEW and can utilize it effectively, such as for automatic control from August 2006. At that moment, EEW was not well known to the general public, so JMA started to provide it to the general public in October 2007, after publicizing the principle and proper actions to be taken. EEWs are issued basically several times for one earthquake improving the accuracy as available data increases as time passes, securing the promptness of the first issuance at the same time. On line connected computer can utilize such multiply issued information for automatic control. But, when they are transmitted to a public, it is impossible to respond properly, and also it is impossible to transmit all by characters and voice. So, JMA considered the issuance criterion and contents of EEW when it is issued to the general public to meet the following conditions. 1) Should be issued on the best timing, to avoid the false alarm, to secure the promptness as much as possible, and to make the revised issuance as few as possible. 2) Should be issued when really a strong motion is expected, and it should be made clear where the safety actions should be taken. As a result, - Issuance criterion : when the maximum seismic intensity 5 lower(JMA scale) or over is expected by using seismic records from more than one station. - EEW contents : Origin time, epicentral region name, and names of areas(unit is about 1/3 to 1/4 of one prefecture) where seismic intensity 4 or over is expected. Expected arrival time is not included because it differs substantially even in one unit area. Considering the gravity of EEW which can save lives, JMA is considering the framework to clearly define the responsibility of JMA, and to assure the technical standard of EEWs that will be issued from private companies to provide expected seismic intensity and arrival time at individual house and building, which is beyond the national agency's service. In the meeting, some examples of the actual issuance will be introduced. EEW system has been developed by JMA, Railway Technical Research Institute, and National Research Institute for Earth Science and Disaster Prevention.

FY2016 Propulsion Materials Annual Progress Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The Propulsion Materials Program actively supports the energy security and reduction of greenhouse emissions goals of VTO by investigating and identifying the materials properties that are most essential for continued development of cost-effective, highly efficient, and environmentally friendly next-generation heavy and light-duty powertrains. The technical approaches available to enhance propulsion systems focus on improvements in both vehicle efficiency and fuel substitution, both of which must overcome the performance limitations of the materials currently in use. Propulsion Materials Program activities work with national laboratories, industry experts, and VTO powertrain systems (e.g., Advanced Combustion Engines and Fuels) teams to develop strategies thatmore » overcome materials limitations in future powertrain performance. The technical maturity of the portfolio of funded projects ranges from basic science to subsystem prototype validation. Projects within a Propulsion Materials Program activity address materials concerns that directly impact critical technology barriers within each of the above programs, including barriers that impact fuel efficiency, thermal management, emissions reduction, improved reliability, and reduced manufacturing costs. The program engages only the barriers that result from material property limitations and represent fundamental, high-risk materials issues.« less

Challenges in Commercializing Biomimetic Membranes

PubMed Central

Perry, Mark; Madsen, Steen Ulrik; Jørgensen, Tine; Braekevelt, Sylvie; Lauritzen, Karsten; Hélix-Nielsen, Claus

2015-01-01

The discovery of selective water channel proteins—aquaporins—has prompted growing interest in using these proteins, as the building blocks for designing new types of membranes. However, as with any other new and potentially disruptive technology, barriers for successful market entry exist. One category includes customer-related barriers, which can be influenced to some extent. Another category includes market-technical-related barriers, which can be very difficult to overcome by an organization/company aiming at successfully introducing their innovation on the market—in particular if both the organization and the technology are at early stages. Often, one faces barriers from both these categories at the same time, which makes it necessary to gain insight of the particular market when introducing a new innovative product. In this review we present the basic concepts and discuss some of these barriers and challenges associated with introducing biomimetic aquaporin membranes. These include technical issues in membrane production and product testing. Then we discuss possible business models for introducing new technologies in general, followed by a presentation of beach-head market segments relevant for biomimetic aquaporin membranes. PMID:26556379

Challenges in Commercializing Biomimetic Membranes.

PubMed

Perry, Mark; Madsen, Steen Ulrik; Jørgensen, Tine; Braekevelt, Sylvie; Lauritzen, Karsten; Hélix-Nielsen, Claus

2015-11-05

The discovery of selective water channel proteins-aquaporins-has prompted growing interest in using these proteins, as the building blocks for designing new types of membranes. However, as with any other new and potentially disruptive technology, barriers for successful market entry exist. One category includes customer-related barriers, which can be influenced to some extent. Another category includes market-technical-related barriers, which can be very difficult to overcome by an organization/company aiming at successfully introducing their innovation on the market-in particular if both the organization and the technology are at early stages. Often, one faces barriers from both these categories at the same time, which makes it necessary to gain insight of the particular market when introducing a new innovative product. In this review we present the basic concepts and discuss some of these barriers and challenges associated with introducing biomimetic aquaporin membranes. These include technical issues in membrane production and product testing. Then we discuss possible business models for introducing new technologies in general, followed by a presentation of beach-head market segments relevant for biomimetic aquaporin membranes.

The Basic Surgical Skills Course in Sub-Saharan Africa: An Observational Study of Effectiveness.

PubMed

Fergusson, Stuart J; Sedgwick, David M; Ntakiyiruta, Georges; Ntirenganya, Faustin

2018-04-01

The Basic Surgical Skills (BSS) course is a common component of postgraduate surgical training programmes in sub-Saharan Africa, but was originally designed in a UK context, and its efficacy and relevance have not been formally assessed in Africa. An observational study was carried out during a BSS course delivered to early-stage surgical trainees from Rwanda and the Democratic Republic of the Congo. Technical skill in a basic wound closure task was assessed in a formal Objective Structured Assessment of Technical Skills (OSAT) before and after course completion. Participants completed a pre-course questionnaire documenting existing surgical experience and self-perceived confidence levels in surgical skills which were to be taught during the course. Participants repeated confidence ratings and completed course evaluation following course delivery. A cohort of 17 participants had completed a pre-course median of 150 Caesarean sections as primary operator. Performance on the OSAT improved from a mean of 10.5/17 pre-course to 14.2/17 post-course (mean of paired differences 3.7, p < 0.001). Improvements were seen in 15/17 components of wound closure. Pre-course, only 47% of candidates were forming hand-tied knots correctly and 38% were appropriately crossing hands with each throw, improving to 88 and 76%, respectively, following the course (p = 0.01 for both components). Confidence levels improved significantly in all technical skills taught, and the course was assessed as highly relevant by trainees. The Basic Surgical Skills course is effective in improving the basic surgical technique of surgical trainees from sub-Saharan Africa and their confidence in key technical skills.

Washington State's Integrated Basic Education and Skills Training Program (I-BEST): New Evidence of Effectiveness. CCRC Working Paper No. 20

ERIC Educational Resources Information Center

Zeidenberg, Matthew; Cho, Sung-Woo; Jenkins, Davis

2010-01-01

To increase the rate at which adult basic skills students advance to and succeed in college-level occupational programs, the Washington State Board for Community and Technical Colleges (SBCTC) developed the Integrated Basic Education and Skills Training, or I-BEST. In the I-BEST model, a basic skills instructor and an occupational instructor team…

Evaluation Research in Basic Skills with Incarcerated Adults. Technical Report No. 303.

ERIC Educational Resources Information Center

Meyer, Linda A.; And Others

To evaluate the relative effectiveness of traditional versus computer managed instruction (CMI) basic skills programs for incarcerated adults, 359 male inmates from three traditional self-paced and three PLATO/CMI programs were given pretests in the Test of Adult Basic Education (TABE) and the Tennessee Self-Concept Scale (TSCS). Following three…

An Independent Evaluation of the Technical Features of the Basic Reading Inventory

ERIC Educational Resources Information Center

Bieber, Gregg; Hulac, David M.; Schweinle, William

2015-01-01

The present study investigated some psychometric properties of the Basic Reading Inventory (BRI), a widely used informal reading inventory. The BRI and Dynamic Indicators of Basic Early Literacy Skills (DIBELS) probes were administered to 149 third, fourth, and fifth graders. Test--retest and alternate forms reliability analyses indicated adequate…

Examining the Efficacy of a Basic Functional Behavioral Assessment Training Package for School Personnel

ERIC Educational Resources Information Center

Loman, Sheldon L.; Horner, Robert H.

2014-01-01

This study evaluated the effects of manualized training in "Basic" functional behavioral assessment (FBA) for typical school professionals on the ability of these professionals to complete technically adequate FBAs. Twelve school professionals participated in four 1-hr training sessions using the Basic FBA training handbook. After…

Entrepreneur Program. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

De Maria, Richard

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The document consists of matrices that describe the relationship of vocational skills to basic communication, mathematics, and science skills within the entrepreneur…

Technical Mathematics.

ERIC Educational Resources Information Center

Flannery, Carol A.

This manuscript provides information and problems for teaching mathematics to vocational education students. Problems reflect applications of mathematical concepts to specific technical areas. The materials are organized into six chapters. Chapter 1 covers basic arithmetic, including fractions, decimals, ratio and proportions, percentages, and…

Investigating Technical and Pedagogical Usability Issues of Collaborative Learning with Wikis

ERIC Educational Resources Information Center

Hadjerrouit, Said

2012-01-01

Wikis have been recently promoted as tools that foster collaborative learning. However, there has been little research devoted to the criteria that are suitable to address issues pertinent to collaborative learning. This paper proposes a set of criteria to explore technical and pedagogical usability issues of collaborative learning with wikis. The…

Report number codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, R.N.

This publication lists all report number codes processed by the Office of Scientific and Technical Information. The report codes are substantially based on the American National Standards Institute, Standard Technical Report Number (STRN)-Format and Creation Z39.23-1983. The Standard Technical Report Number (STRN) provides one of the primary methods of identifying a specific technical report. The STRN consists of two parts: The report code and the sequential number. The report code identifies the issuing organization, a specific program, or a type of document. The sequential number, which is assigned in sequence by each report issuing entity, is not included in thismore » publication. Part I of this compilation is alphabetized by report codes followed by issuing installations. Part II lists the issuing organization followed by the assigned report code(s). In both Parts I and II, the names of issuing organizations appear for the most part in the form used at the time the reports were issued. However, for some of the more prolific installations which have had name changes, all entries have been merged under the current name.« less

PRA in Design: Increasing Confidence in Pre-Operational Assessments of Risks (Results of a Joint NASA/NRC Workshop)

NASA Technical Reports Server (NTRS)

Youngblood, Robert; Dezfuli, Homayoon; Siu, Nathan

2010-01-01

In late 2009, the National Aeronautics and Space Administration (NASA) and the U.S. Nuclear Regulatory Commission (NRC) jointly organized a workshop to discuss technical issues associated with application of risk assessments to early phases of system design. The workshop, which was coordinated by the Idaho National Laboratory, involved invited presentations from a number of PRA experts in the aerospace and nuclear fields and subsequent discussion to address the following questions: (a) What technical issues limit decision-makers' confidence in PRA results, especially at a pre-operational phase of the system life cycle? (b) What is being done to address these issues'? (c) What more can be done ? The workshop resulted in participant observations and suggestions on several technical issues, including the pursuit of non-traditional approaches to risk assessment and the verification and validation of risk models. The workshop participants also identified several important non-technical issues, including risk communication with decision makers, and the integration of PRA into the overall design process.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gauglitz, Phillip A.; Bontha, Jagannadha R.; Daniel, Richard C.

The Hanford Waste Treatment and Immobilization Plant (WTP) is currently being designed and constructed to pretreat and vitrify a large portion of the waste in the 177 underground waste storage tanks at the Hanford Site. A number of technical issues related to the design of the pretreatment facility (PTF) of the WTP have been identified. These issues must be resolved prior to the U.S. Department of Energy (DOE) Office of River Protection (ORP) reaching a decision to proceed with engineering, procurement, and construction activities for the PTF. One of the issues is Technical Issue T1 - Hydrogen Gas Release frommore » Vessels (hereafter referred to as T1). The focus of T1 is identifying controls for hydrogen release and completing any testing required to close the technical issue. In advance of selecting specific controls for hydrogen gas safety, a number of preliminary technical studies were initiated to support anticipated future testing and to improve the understanding of hydrogen gas generation, retention, and release within PTF vessels. These activities supported the development of a plan defining an overall strategy and approach for addressing T1 and achieving technical endpoints identified for T1. Preliminary studies also supported the development of a test plan for conducting testing and analysis to support closing T1. Both of these plans were developed in advance of selecting specific controls, and in the course of working on T1 it was decided that the testing and analysis identified in the test plan were not immediately needed. However, planning activities and preliminary studies led to significant technical progress in a number of areas. This report summarizes the progress to date from the preliminary technical studies. The technical results in this report should not be used for WTP design or safety and hazards analyses and technical results are marked with the following statement: “Preliminary Technical Results for Planning – Not to be used for WTP Design or Safety Analyses.”« less

European consensus conference on faecal microbiota transplantation in clinical practice.

PubMed

Cammarota, Giovanni; Ianiro, Gianluca; Tilg, Herbert; Rajilić-Stojanović, Mirjana; Kump, Patrizia; Satokari, Reetta; Sokol, Harry; Arkkila, Perttu; Pintus, Cristina; Hart, Ailsa; Segal, Jonathan; Aloi, Marina; Masucci, Luca; Molinaro, Antonio; Scaldaferri, Franco; Gasbarrini, Giovanni; Lopez-Sanroman, Antonio; Link, Alexander; de Groot, Pieter; de Vos, Willem M; Högenauer, Christoph; Malfertheiner, Peter; Mattila, Eero; Milosavljević, Tomica; Nieuwdorp, Max; Sanguinetti, Maurizio; Simren, Magnus; Gasbarrini, Antonio

2017-04-01

Faecal microbiota transplantation (FMT) is an important therapeutic option for Clostridium difficile infection. Promising findings suggest that FMT may play a role also in the management of other disorders associated with the alteration of gut microbiota. Although the health community is assessing FMT with renewed interest and patients are becoming more aware, there are technical and logistical issues in establishing such a non-standardised treatment into the clinical practice with safety and proper governance. In view of this, an evidence-based recommendation is needed to drive the practical implementation of FMT. In this European Consensus Conference, 28 experts from 10 countries collaborated, in separate working groups and through an evidence-based process, to provide statements on the following key issues: FMT indications; donor selection; preparation of faecal material; clinical management and faecal delivery and basic requirements for implementing an FMT centre. Statements developed by each working group were evaluated and voted by all members, first through an electronic Delphi process, and then in a plenary consensus conference. The recommendations were released according to best available evidence, in order to act as guidance for physicians who plan to implement FMT, aiming at supporting the broad availability of the procedure, discussing other issues relevant to FMT and promoting future clinical research in the area of gut microbiota manipulation. This consensus report strongly recommends the implementation of FMT centres for the treatment of C. difficile infection as well as traces the guidelines of technicality, regulatory, administrative and laboratory requirements. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Telemedicine for wound management

PubMed Central

Chittoria, Ravi K.

2012-01-01

The escalating physiological, psychological, social and financial burdens of wounds and wound care on patients, families and society demand the immediate attention of the health care sector. Many forces are affecting the changes in health care provision for patients with chronic wounds, including managed care, the limited number of wound care therapists, an increasingly ageing and disabled population, regulatory and malpractice issues, and compromised care. The physician is also faced with a number of difficult issues when caring for chronic wound patients because their conditions are time consuming and high risk, represent an unprofitable part of care practice and raise issues of liability. Telemedicine enhances communication with the surgical wound care specialist. Digital image for skin lesions is a safe, accurate and cost-effective referral pathway. The two basic modes of telemedicine applications, store and forward (asynchronous transfer) and real-time transmission (synchronous transfer, e.g. video conference), are utilized in the wound care setting. Telemedicine technology in the hands of an experienced physician can streamline management of a problem wound. Although there is always an element of anxiety related to technical change, the evolution of wound care telemedicine technology has demonstrated a predictable maturation process. PMID:23162242

Teaching hearing science to undergraduate nonscientists

NASA Astrophysics Data System (ADS)

Weiler, Ernest M.; Boyce, Suzanne; Steger, Joseph

2003-04-01

For those students interested in potential clinical careers in Speech Pathology, or Audiology, a knowledge of some of the scientific bases is important, but should not create a distaste for science. The authors have addressed themselves to these goals: (1) calculation of period, Hz, summation of two sine waves, phase and dB; (2) anticipating undergraduate Speech Science; (3) simple examples of hearing pathology; and (4) basic psycho-acoustical issues. The classic material of Harry Helson was used to elucidate issues of context in experimental science, and that of S.S. Stevens was used to exemplify psycho-acoustical formulas of common use. Four texts that have been tried on approximately 200 students were evaluated. Surprisingly, the best provided the fewest formulas, short study questions with answers, good examples, and a list of common terms. The next best was aimed at slightly more advanced students, but each chapter contained introductory material, examples, and definitions suitable for naïve undergraduates. The least satisfactory text provided excerpts of technical material with abrupt transitions, no examples, and only part of the definitions needed for the naïve student. Perhaps the most difficult teaching issue is to avoid demanding graduate-level science from those undergraduates with clinical aspirations.

SU-E-CAMPUS-J-04: Image Guided Radiation Therapy (IGRT): Review of Technical Standards and Credentialing in Radiotherapy Clinical Trials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giaddui, T; Chen, W; Yu, J

2014-06-15

Purpose: To review IGRT credentialing experience and unexpected technical issues encountered in connection with advanced radiotherapy technologies as implemented in RTOG clinical trials. To update IGRT credentialing procedures with the aim of improving the quality of the process, and to increase the proportion of IGRT credentialing compliance. To develop a living disease site-specific IGRT encyclopedia. Methods: Numerous technical issues were encountered during the IGRT credentialing process. The criteria used for credentialing review were based on: image quality; anatomy included in fused data sets and shift results. Credentialing requirements have been updated according to the AAPM task group reports for IGRTmore » to ensure that all required technical items are included in the quality review process. Implementation instructions have been updated and expanded for recent protocols. Results: Technical issues observed during the credentialing review process include, but are not limited to: poor quality images; inadequate image acquisition region; poor data quality; shifts larger than acceptable; no soft tissue surrogate. The updated IGRT credentialing process will address these issues and will also include the technical items required from AAPM: TG 104; TG 142 and TG 179 reports. An instruction manual has been developed describing a remote credentialing method for reviewers. Submission requirements are updated, including images/documents as well as facility questionnaire. The review report now includes summary of the review process and the parameters that reviewers check. We have reached consensus on the minimum IGRT technical requirement for a number of disease sites. RTOG 1311(NRG-BR002A Phase 1 Study of Stereotactic Body Radiotherapy (SBRT) for the Treatment of Multiple Metastases) is an example, here; the protocol specified the minimum requirement for each anatomical sites (with/without fiducials). Conclusion: Technical issues are identified and reported. IGRT guidelines are updated, with the corresponding credentialing requirements. An IGRT encyclopedia describing site-specific implementation issues is currently in development.« less

Strategic Control Algorithm Development : Volume 2A. Technical Report.

DOT National Transportation Integrated Search

1974-08-01

The technical report presents a detailed description of the strategic control functional objectives, followed by a presentation of the basic strategic control algorithm and how it evolved. Contained in this discussion are results of analyses that con...

Strategic Control Algorithm Development : Volume 2B. Technical Report (Concluded)

DOT National Transportation Integrated Search

1974-08-01

The technical report presents a detailed description of the strategic control functional objectives, followed by a presentation of the basic strategic control algorithm and how it evolved. Contained in this discussion are the results of analyses that...

Engineering Forum Issue Paper: Online Hazardous Waste Cleanup Technical Resources

EPA Pesticide Factsheets

This issue paper is intended to give the reader examples of some online technical resources that can assist with hazardous waste cleanups in the Superfund, Resource Conservation and Recovery Act (RCRA), and Brownfields programs.

Vehicle infrastructure integration proof of concept : technical description--vehicle : final report

DOT National Transportation Integrated Search

2009-05-19

This report provides the technical description of the VII system developed for the Cooperative Agreement VII Program between the USDOT and the VII Consortium. The basic architectural elements are summarized and detailed descriptions of the hardware a...

Surgical ergonomics. Analysis of technical skills, simulation models and assessment methods.

PubMed

Papaspyros, Sotiris C; Kar, Ashok; O'Regan, David

2015-06-01

Over the past two centuries the surgical profession has undergone a profound evolution in terms of efficiency and outcomes. Societal concerns in relation to quality assurance, patient safety and cost reduction have highlighted the issue of training expert surgeons. The core elements of a training model build on the basic foundations of gross and fine motor skills. In this paper we provide an analysis of the ergonomic principles involved and propose relevant training techniques. We have endeavored to provide both the trainer and trainee perspectives. This paper is structured into four sections: 1) Pre-operative preparation issues, 2) technical skills and instrument handling, 3) low fidelity simulation models and 4) discussion of current concepts in crew resource management, deliberate practice and assessment. Rehearsal, warm-up and motivation-enhancing techniques aid concentration and focus. Appropriate posture, comprehension of ergonomic principles in relation to surgical instruments and utilisation of the non-dominant hand are essential skills to master. Low fidelity models can be used to achieve significant progress through the early stages of the learning curve. Deliberate practice and innate ability are complementary to each other and may be considered useful adjuncts to surgical skills development. Safe medical care requires that complex patient interventions be performed by highly skilled operators supported by reliable teams. Surgical ergonomics lie at the heart of any training model that aims to produce professionals able to function as leaders of a patient safety oriented culture. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

Mask industry assessment trend analysis

NASA Astrophysics Data System (ADS)

Shelden, Gilbert; Marmillion, Patricia; Hughes, Greg

2008-04-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH and administered by SEMI North America to gather information about the mask industry as an objective assessment of its overall condition. This year's survey data were presented in detail at BACUS and the detailed trend analysis presented at EMLC. The survey is designed with the input of semiconductor company mask technologists, merchant mask suppliers, and industry equipment makers. This year's assessment is the sixth in the current series of annual reports. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments on critical path issues. This year's survey is basically the same as the 2005 and 2006 surveys. Questions are grouped into eight categories: General Business Profile Information, Data Processing, Yields and Yield Loss, Mechanisms, Delivery Times, Returns and Services, Operating Cost Factors, and Equipment Utilization. Within each category is a multitude of questions that creates a detailed profile of both the business and technical status of the critical mask industry. Note: the questions covering operating cost factors and equipment utilization were added to the survey only in 2005; therefore, meaningful trend analysis is not available.

Analysis of the Parameters Required for Performance Monitoring and Assessment of Military Communications Systems by Military Technical Controller

DTIC Science & Technology

1975-12-01

139 APPENDIX A* BASIC CONCEPT OF MILITARY TECHNICAL CONTROL.142 6 APIENDIX Es TEST EQUIPMENI REQUIRED FOR lEASURF.4ENr OF 1AF’AMETE RS...Control ( SATEC ) Automatic Facilities heport Army Automated Quality Monitoring Reporting System (AQMPS) Army Autcmated Technical Control-Semi (ATC-Semi...technical control then beco.. es equipment status monitoring. All the major equipment in a system wculd have internal sensors with properly selected parameters

Review of guidelines and literature for handling missing data in longitudinal clinical trials with a case study.

PubMed

Liu, M; Wei, L; Zhang, J

2006-01-01

Missing data in clinical trials are inevitable. We highlight the ICH guidelines and CPMP points to consider on missing data. Specifically, we outline how we should consider missing data issues when designing, planning and conducting studies to minimize missing data impact. We also go beyond the coverage of the above two documents, provide a more detailed review of the basic concepts of missing data and frequently used terminologies, and examples of the typical missing data mechanism, and discuss technical details and literature for several frequently used statistical methods and associated software. Finally, we provide a case study where the principles outlined in this paper are applied to one clinical program at protocol design, data analysis plan and other stages of a clinical trial.

Strategic marketing: an introduction for medical specialists.

PubMed

Lexa, Frank James; Berlin, Jonathan

2006-03-01

Marketing and branding are 2 of the most important factors for business success in the United States. They are particularly critical in service industries such as diagnostic imaging. However, in spite of their strategic importance in radiology success, a search of the peer-reviewed radiology literature reveals a paucity of published work that addresses marketing for imaging practices. In particular, there is a dearth of literature addressing the role (both direct and indirect) of radiologists in marketing efforts. In this article, the authors attempt to identify and correct some common misconceptions that physicians and other scientific and technical professionals have about marketing. Basic terms and preliminary concepts are introduced to provide a foundational understanding of the topic, allowing the interested reader to move forward and explore these critical issues in greater depth.

Student Support for EIPBN 2016 Conference - Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrow, Reginald C.

The 60th International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN) was held in Pittsburgh, PA, from May 31st to June 3rd, 2016. The conference received technical co-sponsorship from the American Vacuum Society (AVS) in cooperation with the Optical Society of America (OSA), and the American Physical Society (APS). The conference was a great success in large part because financial support allowed robust participation from students. The students gave oral and poster presentations of their research and many published peer-reviewed articles in a special conference issue of the Journal of Vacuum Science and Technology B. The Departmentmore » of Energy Office of Basic Energy Sciences supported 10 students from US universities with a $5,000 grant (DE-SC0015555).« less

Survivability Enhancements for Military Communications Satellites

DTIC Science & Technology

1990-01-01

Communications Agency, Jan 1984. Townley , Ralph K., David W. Brown, Martin 0. Bernet, and Bernard L. Pankowski. "Selected Issues in DCS Integration...K. Townley , David W. Brown, Martin 0. Bernet, and Bernard L. Pankowski, "Selected Issues in DCS Technical Integration," Technical paper prepared by...34 Technical Note 11-82. Defense Communications Agency, Jan 1984. Townley , Ralph K., David W. Brown, Martin 0. Bernet, and Bernard L. Pankowski. "Selected

Using the General Mission Analysis Tool (GMAT)

NASA Technical Reports Server (NTRS)

Hughes, Steven P.; Conway, Darrel J.; Parker, Joel

2017-01-01

This is a software tutorial and presentation demonstrating the application of the General Mission Analysis Tool (GMAT). These slides will be used to accompany the demonstration. The demonstration discusses GMAT basics, then presents a detailed example of GMAT application to the Transiting Exoplanet Survey Satellite (TESS) mission. This talk is a combination of existing presentations and material; system user guide and technical documentation; a GMAT basics and overview, and technical presentations from the TESS projects on their application of GMAT to critical mission design. The GMAT basics slides are taken from the open source training material. The TESS slides are a streamlined version of the CDR package provided by the project with SBU and ITAR data removed by the TESS project. Slides for navigation and optimal control are borrowed from system documentation and training material.

Obtaining Technical Support for Superfund, RCRA and Brownfields Site Issues Fact Sheet

EPA Pesticide Factsheets

EPA’s Technical Support Centers (TSCs) and other technical support services are available to Regional RemedialProject Managers, Corrective Action Staff, and On-Scene Coordinators needing specialized technical expertisefor specific tasks or projects.

Remaking Career and Technical Education for the 21st Century: What Role for High School Programs?

ERIC Educational Resources Information Center

Kazis, Richard

2005-01-01

As part of the broader policy debate on how to reform K-12 education, particularly high schools, basic questions about career and technical education are on the table. "Remaking Career and Technical Education for the 21st Century" begins with a summary of what researchers know--and do not know--about the value of high school…

Theme: Trends and Issues Affecting the Future of Agricultural Education.

ERIC Educational Resources Information Center

Agricultural Education Magazine, 2000

2000-01-01

Articles discuss trends and issues in agricultural education, community and technical colleges, career/technical studies, Australian agriculture, agricultural science and technology programs in urban areas, genetic engineering, the impact of changing technologies on agricultural education, volunteers, and performance-based assessment. (JOW)

Adult Literacy & Basic Skills Unit Newsletter. Nos. 32-35.

ERIC Educational Resources Information Center

Adult Literacy & Basic Skills Unit Newsletter, 1989

1989-01-01

This packet contains the four issues of a newsletter published in 1989 by the Adult Literacy & Basic Skills Unit in England. The Winter issue contains the following articles: "After the Act"; "An Evening at the Theatre"; "Horticulture: A Practical Project with Autistic Adults"; "Shared Reading"; and "Literacy and Adult Basic Education in…

75 FR 61228 - Board Meeting: Technical Lessons Gained From High-Level Nuclear Waste Disposal Efforts

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-04

... NUCLEAR WASTE TECHNICAL REVIEW BOARD Board Meeting: Technical Lessons Gained From High-Level... Waste Policy Amendments Act of 1987, the U.S. Nuclear Waste Technical Review Board will meet in Dulles... of Energy on technical issues and to review the technical validity of DOE activities related to...

Basic energy sciences: Summary of accomplishments

NASA Astrophysics Data System (ADS)

1990-05-01

For more than four decades, the Department of Energy, including its predecessor agencies, has supported a program of basic research in nuclear- and energy related sciences, known as Basic Energy Sciences. The purpose of the program is to explore fundamental phenomena, create scientific knowledge, and provide unique user facilities necessary for conducting basic research. Its technical interests span the range of scientific disciplines: physical and biological sciences, geological sciences, engineering, mathematics, and computer sciences. Its products and facilities are essential to technology development in many of the more applied areas of the Department's energy, science, and national defense missions. The accomplishments of Basic Energy Sciences research are numerous and significant. Not only have they contributed to Departmental missions, but have aided significantly the development of technologies which now serve modern society daily in business, industry, science, and medicine. In a series of stories, this report highlights 22 accomplishments, selected because of their particularly noteworthy contributions to modern society. A full accounting of all the accomplishments would be voluminous. Detailed documentation of the research results can be found in many thousands of articles published in peer-reviewed technical literature.

Basic Energy Sciences: Summary of Accomplishments

DOE R&D Accomplishments Database

1990-05-01

For more than four decades, the Department of Energy, including its predecessor agencies, has supported a program of basic research in nuclear- and energy-related sciences, known as Basic Energy Sciences. The purpose of the program is to explore fundamental phenomena, create scientific knowledge, and provide unique user'' facilities necessary for conducting basic research. Its technical interests span the range of scientific disciplines: physical and biological sciences, geological sciences, engineering, mathematics, and computer sciences. Its products and facilities are essential to technology development in many of the more applied areas of the Department's energy, science, and national defense missions. The accomplishments of Basic Energy Sciences research are numerous and significant. Not only have they contributed to Departmental missions, but have aided significantly the development of technologies which now serve modern society daily in business, industry, science, and medicine. In a series of stories, this report highlights 22 accomplishments, selected because of their particularly noteworthy contributions to modern society. A full accounting of all the accomplishments would be voluminous. Detailed documentation of the research results can be found in many thousands of articles published in peer-reviewed technical literature.

"Waiting for an Aristotle": A Moment in the History of the Basic Writing Movement.

ERIC Educational Resources Information Center

Hunter, Paul

1992-01-01

Demonstrates how an issue of the "Journal of Basic Writing," published in 1980 as a memorial for theorist Mina Shaughnessy, resembles structurally the funeral orations of Ancient Greece. Divides the issue into three parts: praise, lament, and consolation. Discusses political implications of the issue. (HB)

Comparison of Legislation Concerned with Basic Skills.

ERIC Educational Resources Information Center

Office of Education (DHEW), Washington, DC.

This handbook provides a comparative listing of 22 federally legislated basic skills programs. Included are the names and phone numbers of working representatives associated with each program, application deadlines, target groups, funding instruments, possible grantees, sign-off requirements, program content, technical assistance, evaluation…

48 CFR 253.209-1 - Responsible prospective contractors.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Section III, Block 19, generally mean— (A) Technical capability. An assessment of the prospective contractor's key management personnel to determine if they have the basic technical knowledge, experience... completion. This includes— (1) An assessment of the prospective contractor's possession of, or the ability to...

Determining the Feasibility of an Annual Commissioner's Report of the Mastery of Basic Skills by Florida Citizens. Basic Literacy and Basic Skills Technical Report No. 1.

ERIC Educational Resources Information Center

Powell, William R.; And Others

This report recommends that an annual report be made to the citizens of Florida about the state of literacy in Florida. The concept of literacy is defined in terms of levels of literacy and basic skills required to achieve the different levels. A review of the literature on literacy is the basis for three suggested levels of literacy: (1)…

The Presidential Address to the Association for Career and Technical Education Research: Using Standards to Reform Teacher Preparation in Career and Technical Education--A Successful Reformation

ERIC Educational Resources Information Center

Whittington, M. Susie

2005-01-01

This article presents the presidential address at the annual conference of the Association for Career and Technical Education Research by M. Susie Whittington, ACTER President 2005. The purpose of the presidential address is to examine a current issue facing the profession, and pose challenges to the membership in the context of that issue. In her…

Basic Mechanisms of the Epilepsies.

ERIC Educational Resources Information Center

Jasper, Herbert H., Ed.; And Others

A collection of highly technical scientific articles by international basic and clinical neuroscientists constitutes a review of their knowledge of the brain and nervous system, particularly the aspects related to loss of brain function control and its explosive discharges which cause epileptic seizures. Anatomy, biophysics, biochemistry, and…

Developing Basic Electronics Aptitudes.

ERIC Educational Resources Information Center

Lakeshore Technical Coll., Cleveland, WI.

This curriculum guide provides materials for basic training in electrical and electronic theory to enable participants to analyze circuits and use test equipment to verify electrical operations and to succeed in the beginning electrical and electronic courses in the Lakeshore Technical College (Wisconsin) electronics programs. The course includes…

47 CFR 76.611 - Cable television basic signal leakage performance criteria.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Cable television basic signal leakage performance criteria. 76.611 Section 76.611 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Technical Standards § 76.611 Cable...

Sequential Testing: Basics and Benefits

DTIC Science & Technology

1978-03-01

Eii~TARADC6M and x _..TECHNICAL REPORT NO. 12325 SEQUENTIAL TESTING: BASICS AND BENEFITS / i * p iREFERENCE CP...Sequential Testing: Basics and Benefits Contents Page I. Introduction and Summary II. Sequential Analysis 2 III. Mathematics of Sequential Testing 4 IV...testing. The added benefit of reduced energy needs are inherent in this testing method. The text was originally released by the authors in 1972. The text

Technical/Engineering. Georgia Core Standards for Occupational Clusters.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Occupational Studies.

This document lists core standards and occupational knowledge and skills that have been identified and validated by industry as necessary to all Georgia students in secondary-level technical/engineering programs. First, foundation skills are grouped as follows: basic skills (reading, writing, arithmetic/mathematics, listening, speaking); thinking…

Hazardous Materials Technician. Technical Committee on Occupational Curriculum Development.

ERIC Educational Resources Information Center

Northern Montana Coll., Havre. Montana Center for Vocational Education, Research, Curriculum and Personnel Development.

This document describes Montana's postsecondary curriculum to prepare hazardous materials technicians. Basic general education requirements are described. The technical skills and the knowledge associated with each are listed in the following categories: (1) site assessment; (2) sampling materials; (3) handling materials; (4) recording data; (5)…

Architectural Drafting: Commercial Applications. Teacher Guide.

ERIC Educational Resources Information Center

Whitney, Terry A.

This curriculum guide contains the technical information and tasks necessary for a student (who has already completed basic drafting) to be employed as an architectural drafter trainee. The curriculum is written in terms of student performance using measurable objectives, technical information, tasks developed to accomplish those objectives, and…

Drinking Water - National Drinking Water Clearinghouse

Science.gov Websites

relevant to drinking water issues. We provide free and low-cost publications, products, databases , referrals, and more. Free Technical Assistance Calls The NDWC can answer common questions involving issues system troubleshooting. Call our Engineers and technical assistance specialists toll-free at (304) 293

75 FR 68780 - Reliability Monitoring, Enforcement and Compliance Issues; Agenda for the Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-09

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD11-1-000] Reliability Monitoring, Enforcement and Compliance Issues; Agenda for the Technical Conference November 2, 2010. The... associated with reliability monitoring, enforcement and compliance. The Commission announced the conference...

AgRISTARS documents tracking list report

NASA Technical Reports Server (NTRS)

Hawkins, J. L.

1983-01-01

A quarterly listing of documents issued and placed in the AgRISTARS tracking system is provided. The technical publications are arranged by type of documents. The reference AgRISTARS document number, title and date of publication, the issuing organization, and the National Technical Information Service reference number is given.

ERCMExpress. Volume 1, Issue 1

ERIC Educational Resources Information Center

US Department of Education, 2005

2005-01-01

This is the inaugural issue of the Emergency Response and Crisis Management (ERCM) Technical Assistance Center's "ERCMExpress," and it focuses on the new technical assistance center. The center will support 243 grantees funded under the Emergency Response and Crisis Management program in managing and implementing their projects, and in sustaining…

Human research ethics committees in technical universities.

PubMed

Koepsell, David; Brinkman, Willem-Paul; Pont, Sylvia

2014-07-01

Human research ethics has developed in both theory and practice mostly from experiences in medical research. Human participants, however, are used in a much broader range of research than ethics committees oversee, including both basic and applied research at technical universities. Although mandated in the United States, the United Kingdom, Canada, and Australia, non-medical research involving humans need not receive ethics review in much of Europe, Asia, Latin America, and Africa. Our survey of the top 50 technical universities in the world shows that, where not specifically mandated by law, most technical universities do not employ ethics committees to review human studies. As the domains of basic and applied sciences expand, ethics committees are increasingly needed to guide and oversee all such research regardless of legal requirements. We offer as examples, from our experience as an ethics committee in a major European technical university, ways in which such a committee provides needed services and can help ensure more ethical studies involving humans outside the standard medical context. We provide some arguments for creating such committees, and in our supplemental article, we provide specific examples of cases and concerns that may confront technical, engineering, and design research, as well as outline the general framework we have used in creating our committee. © The Author(s) 2014.

FY2014 Propulsion Materials R&D Annual Progress Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The Propulsion Materials Program actively supports the energy security and reduction of greenhouse emissions goals of VTO by investigating and identifying the materials properties that are most essential for continued development of cost-effective, highly efficient, and environmentally friendly next-generation heavy and light-duty powertrains. The technical approaches available to enhance propulsion systems focus on improvements in both vehicle efficiency and fuel substitution, both of which must overcome the performance limitations of the materials currently in use. Propulsion Materials Program activities work with national laboratories, industry experts, and VTO powertrain systems (e.g., Advanced Combustion Engines [ACE], Advanced Power Electronics and Electrical Machinesmore » [APEEM], and fuels) teams to develop strategies that overcome materials limitations in future powertrain performance. The technical maturity of the portfolio of funded projects ranges from basic science to subsystem prototype validation. Projects within a Propulsion Materials Program activity address materials concerns that directly impact critical technology barriers within each of the above programs, including barriers that impact fuel efficiency, thermal management, emissions reduction, improved reliability, and reduced manufacturing costs. The program engages only the barriers that result from material property limitations and represent fundamental, high-risk materials issues.« less

FY2015 Propulsion Materials Annual Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The Propulsion Materials Program actively supports the energy security and reduction of greenhouse emissions goals of VTO by investigating and identifying the materials properties that are most essential for continued development of cost-effective, highly efficient, and environmentally friendly next-generation heavy and light-duty powertrains. The technical approaches available to enhance propulsion systems focus on improvements in both vehicle efficiency and fuel substitution, both of which must overcome the performance limitations of the materials currently in use. Propulsion Materials Program activities work with national laboratories, industry experts, and VTO powertrain systems (e.g., Advanced Combustion Engines [ACE], Advanced Power Electronics and Electrical Machinesmore » [APEEM], and fuels) teams to develop strategies that overcome materials limitations in future powertrain performance. The technical maturity of the portfolio of funded projects ranges from basic science to subsystem prototype validation. Projects within a Propulsion Materials Program activity address materials concerns that directly impact critical technology barriers within each of the above programs, including barriers that impact fuel efficiency, thermal management, emissions reduction, improved reliability, and reduced manufacturing costs. The program engages only the barriers that result from material property limitations and represent fundamental, high-risk materials issues.« less

Mask Industry Assessment: 2010

NASA Astrophysics Data System (ADS)

Hughes, Greg; Chan, David Y.

2010-09-01

A survey created supported by SEMATECH and administered by David Powell Consulting was sent to microelectronics industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the ninth in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. It will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey was basically the same as the 2005 through 2009 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the critical mask industry. This profile combined with the responses to past surveys represents a comprehensive view of changes in the industry.

Computer applications in the search for unrelated stem cell donors.

PubMed

Müller, Carlheinz R

2002-08-01

The majority of patients which are eligible for a blood stem cell transplantation from an allogeneic donor do not have a suitable related donor so that an efficient unrelated donor search is a prerequisite for this treatment. Currently, there are over 7 million volunteer donors in the files of 50 registries in the world and in most countries the majority of transplants are performed from a foreign donor. Evidently, computer and communication technology must play a crucial role in the complex donor search process on the national and international level. This article describes the structural elements of the donor search process and discusses major systematic and technical issues to be addressed in the development and evolution of the supporting telematic systems. The theoretical considerations are complemented by a concise overview over the current state of the art which is given by describing the scope, relevance, interconnection and technical background of three major national and international computer appliances: The German Marrow Donor Information System (GERMIS) and the European Marrow Donor Information System (EMDIS) are interoperable business-to-business e-commerce systems and Bone Marrow Donors World Wide (BMDW) is the basic international donor information desk on the web.

The Video Handbook.

ERIC Educational Resources Information Center

1972

In order to provide basic technical and production information for closed-circuit television, the editors have assembled this series of papers. Deisgned as an introductory guide for those entering the field, the handbook covers the basic areas of non-broadcast television. Starting with facilities and equipment the guide outlines the planning and…

Linking Educational Philosophy with Micro-Level Technology: The Search for a Complete Method.

ERIC Educational Resources Information Center

Januszewski, Alan

Traditionally, educational technologists have not been concerned with social or philosophical questions, and the field does not have a basic educational philosophy. Instead, it is dominated by a viewpoint characterized as "technical rationality" or "technicism"; the most important assumption of this viewpoint is that science…

Differences in the Vocational Interests of Research and Development Managers versus Technical Specialists.

ERIC Educational Resources Information Center

Hill, Raymond E.; Roselle, Pamela F.

1985-01-01

Compared the occupational interests of research and development managers (N=110) and technical specialists (N=55). Analysis on the general occupational themes and basic interest scales of the Strong-Campbell Interest Inventory indicated the social, enterprising, and conventional areas predicted managerial group membership, whereas the artistic…

Food Service Technical Terms. English-Spanish Lexicon.

ERIC Educational Resources Information Center

Shin, Masako T.

This English-Spanish lexicon presents food service technical terms. The terms are divided into seven categories: basic food items, common baking terms, food cutting terms, general cooking terms, non-English culinary terms, and tools and equipment. Each English word or term is followed by its Spanish equivalent(s). (YLB)

Unified Technical Concepts. Application Modules Volume II.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Unified Technical Concepts (UTC) is a modular system for teaching applied physics in two-year postsecondary technician programs. This UTC laboratory textbook, the second of two volumes, consists of 45 learning modules dealing with basic concepts of physics. Addressed in the individual chapters of the guide are the following topics: force…

Using Design Principles to Teach Technical Communication.

ERIC Educational Resources Information Center

Markel, Mike

1995-01-01

Compares the writing of two students--a competent writer and a weak one--in a technical communication course before and after discussion of design principles. Finds that a basic understanding of design principles helped them improve document macrostructure but had little effect on document microstructure. Suggests that integrating document design…

Stafford Technical Center: Designing a Future for Architects and Builders

ERIC Educational Resources Information Center

Lucci, William, Jr.

2005-01-01

The Engineering Technology Academy (ETA) program at Stafford Technical Center in Rutland, Vermont, offers benefits beyond the conventional high school learning experience. In September, at the beginning of the program, students learn the traditional skills of using tools, line weights and lettering. Once they develop these basic skills, students…

Seven Keys to Successful Study.

ERIC Educational Resources Information Center

Edwards, Peter

Written for secondary, technical, and technical and further education (TAFE) students, this book aims to make learning easier and more enjoyable by showing students how to use a series of basic study skills called "keys." The book offers an explanation, examples, graphic illustrations, and activities for each skill. Chapters include: (1)…

Career Technical Education Enhancement Fund Report

ERIC Educational Resources Information Center

California Community Colleges, Chancellor's Office, 2015

2015-01-01

The California Community Colleges serve more than 2.1 million students and is the largest system of higher education in the nation. The state's 112 colleges provide workforce training, teach basic math and English, and prepare students for transfer to four-year universities and colleges. Senate Bill 852 established the Career Technical Education…

The Internet and Technical Services: A Point Break Approach.

ERIC Educational Resources Information Center

McCombs, Gillian M.

1994-01-01

Discusses implications of using the Internet for library technical services. Topics addressed include creative uses of the Internet; three basic applications on the Internet, i.e., electronic mail, remote log-in to another computer, and file transfer; electronic processing of information; electronic access to information; and electronic processing…

Archival Stability of Microfilm--A Technical Review.

ERIC Educational Resources Information Center

Materazzi, Albert R.

The purpose of this report is to acquaint all personnel with some technical aspects of micrographics. The various film types used in the production of microfiche are discussed, including silver halide, diazo, and vesicular films. Other imaging systems used in micrographics are reviewed, and a basic introduction to sensitometry is given. The…

Entomology Specialist 1-1. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Jones, Jimmie L.

This individualized, self-paced course for training an entomology specialist was adapted from military curriculum materials for use in vocational and technical education. Completion of the course should provide students with basic information needed to accomplish the following duties of an entomology specialist: perform entomological work, apply…

A mission to preserve the Geostationary Region (ROGER)

NASA Astrophysics Data System (ADS)

Smith, D.; Martin, K. C.; Petersen, H.; Shaw, A.; Skidmore, B.; Smith, D.; Stokes, H.; Willig, A.

The high strategic and commercial value of the geostationary region is unquestioned. It is known that many satellites are not re-orbited at the end of their mission for a number of reasons. Previous studies have investigated the possibility of rendezvous and docking with an uncontrolled target and concluded a basic technical plausibility. Thus the possibility exists that spent satellites could be removed from the operational region by one or more shuttle vehicles. This is the basis for the European Space Agency (ESA/ESTEC) study entitled Robotic Geostationary Orbit Restorer (ROGER). In full, the ROGER study will address the collision risk in GEO, identify workable economic and technical mission scenarios and propose a solution. To enable an accurate quantification of the risk in the operational GEO region a detailed assessment of the current and future status has been performed. This paper will present the results of this analysis, which includes a breakdown of the current utilisation of the GEO ring and an assessment of the satellite failures that have afflicted GEO satellites. Also considered are the general trends in the GEO market and the tendencies of satellite operators to remove their assets from the operational GEO region at the end of their useful life. All of these analyses are brought together in a GEO Simulator, which is designed to determine the collision risk in GEO and the effect that satellite failures, future launch traffic and re-orbiting trends have on this risk. Drawing on this assessment of current and future GEO utilisation, a list of potential ROGER mission scenarios has been generated. For each case the major technical issues are assessed with respect to the available technology, and cost and schedule implications are compared with economic issues such as sources of funding. In this way, cases for government and commercial funding of a ROGER mission are examined. This paper will present examples of such analyses and discuss the rationale behind a possible solution.

32 CFR 202.13 - Technical assistance for public participation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Reporting Requirements § 202.13 Technical assistance for public participation. Community members of a RAB or TRC may request technical assistance for interpreting scientific and engineering issues with regard to...

77 FR 46306 - Fluxapyroxad; Pesticide Tolerances Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-03

...; Pesticide Tolerances Technical Amendment AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule; technical amendment. SUMMARY: EPA issued a final rule in the Federal Register of May 14, 2012, concerning.... Inadvertently, the terminology for the oilseed crop group and for dried plums was incorrect. This technical...

Technical documentation challenges in aviation maintenance : a proceedings report.

DOT National Transportation Integrated Search

2012-11-01

The 2012 Technical Documentation workshop addressed both problems and solutions associated with technical : documentation for maintenance. These issues are known to cause errors, rework, maintenance delays, other : safety hazards, and FAA administrat...

Research on ecological function zoning information system based on WebGIS

NASA Astrophysics Data System (ADS)

Zhang, Jianxiong; Zhang, Gang

2007-06-01

With the development of information technology, application of WebGIS will make it possible to realize digitization and intellectualization in issuing and managing information of ecological function zoning. Firstly, this paper introduces the fundamental principles, basic methods and current situation of development and various support techniques about WebGIS. Secondly, the paper not only compares and analyzes the above methods but also discusses their applied prospect and feasibility in Web management. Finally, exemplified by Jiaozuo City, the paper puts forward an idea of design and a project of realization about the information system. In this research, the digital map and establishment of map database have been finished by MapInfo. Combining with some technical data of ecological environment of Jiaozuo City, the information of ecological environment resources is collected, stored, analyzed, calculated and displayed in the form of pictures and graphs on the WebGIS platform, which makes use of secondary development flat-MapXtreme for Java and some tools such as Java, JSP and JavaScript. Serve mode is adopted in the system which has realized the operating, inquiring of basic map and working out thematic map. By the finished system, it brings some references.

A University-Level Curriculum in Climate Change for SE Asia and the Asian Pacific

NASA Astrophysics Data System (ADS)

Furniss, M. J.; Saah, D. S.; Hines, S. J.; Radel, C. A.; McGroddy, M. E.; Ganz, D. J.

2014-12-01

A university-level curriculum has been developed for the SE Asia and Asia Pacific region and is currently being implemented by 12+ universities; in Vietnam, Cambodia, Laos, Thailand, Malaysia, and Papua New Guinea. The curriculum is supported by USAID (U.S. Agency for International Development) through the LEAF program (Lowering Emissions in Asian Forests), under the technical leadership of the U.S. Forest Service. Four modules have been developed: Basic Climate Change, Low-Emissions Land Use Planning, Social and Environmental Soundness, and Carbon Measurement and Monitoring. This presentation will focus on the Basic Climate Change module. This is a survey course that covers a wide range of climate change topics, including causes, effects, and responses. The level of detail in each of the covered topics is calibrated to current issues in the region. The module is elaborated in English and will be translated into the national language of the participating countries. The module is designed to be flexible and can be tailored to both degree and non-degree programs; as well as for trainings for natural resources professionals and policy-makers. Important training topics can be selected as short course trainings for practitioners and leaders working on climate change.

Preparing images for publication: part 1.

PubMed

Devigus, Alessandro; Paul, Stefan

2006-04-01

Images play a vital role in the publication and presentation of clinical and scientific work. Within clinical photography, color reproduction has always been a contentious issue. With the development of new technologies, the variables affecting color reproduction have changed, and photographers have moved away from film-based to digital photographic imaging systems. To develop an understanding of color, knowledge about the basic principles of light and vision is important. An object's color is determined by which wavelengths of light it reflects. Colors of light and colors of pigment behave differently. Due to technical limitations, monitors and printers are unable to reproduce all the colors we can see with our eyes, also called the LAB color space. In order to optimize the output of digital clinical images, color management solutions need to be integrated in the photographic workflow; however, their use is still limited in the medical field. As described in part 2 of this article, calibrating your computer monitor and using an 18% gray background card are easy ways to enable more consistent color reproduction for publication. In addition, some basic information about the various camera settings is given to facilitate the use of this new digital equipment in daily practice.

Bioanalysis in microfluidic devices.

PubMed

Khandurina, Julia; Guttman, András

2002-01-18

Microfabricated bioanalytical devices (also referred to as laboratory-on-a-chip or micro-TAS) offer highly efficient platforms for simultaneous analysis of a large number of biologically important molecules, possessing great potential for genome, proteome and metabolome studies. Development and implementation of microfluidic-based bioanalytical tools involves both established and evolving technologies, including microlithography, micromachining, micro-electromechanical systems technology and nanotechnology. This article provides an overview of the latest developments in the key device subject areas and the basic interdisciplinary technologies. Important aspects of DNA and protein analysis, interfacing issues and system integration are all thoroughly discussed, along with applications for this novel "synergized" technology in high-throughput separations of biologically important molecules. This review also gives a better understanding of how to utilize these technologies as well as to provide appropriate technical solutions to problems perceived as being more fundamental.

Multidisciplinary Design Optimization Techniques: Implications and Opportunities for Fluid Dynamics Research

NASA Technical Reports Server (NTRS)

Zang, Thomas A.; Green, Lawrence L.

1999-01-01

A challenge for the fluid dynamics community is to adapt to and exploit the trend towards greater multidisciplinary focus in research and technology. The past decade has witnessed substantial growth in the research field of Multidisciplinary Design Optimization (MDO). MDO is a methodology for the design of complex engineering systems and subsystems that coherently exploits the synergism of mutually interacting phenomena. As evidenced by the papers, which appear in the biannual AIAA/USAF/NASA/ISSMO Symposia on Multidisciplinary Analysis and Optimization, the MDO technical community focuses on vehicle and system design issues. This paper provides an overview of the MDO technology field from a fluid dynamics perspective, giving emphasis to suggestions of specific applications of recent MDO technologies that can enhance fluid dynamics research itself across the spectrum, from basic flow physics to full configuration aerodynamics.

Maternal and child health project in Nigeria.

PubMed

Okafor, Chinyelu B

2003-12-01

Maternal deaths in developing countries are rooted in womens powerlessness and their unequal access to employment, finance, education, basic health care, and other resources. Nigeria is Africa's most populous country, and it is an oil producing country, but Nigeria has one of the worst maternal mortality rates in Africa. These deaths were linked to deficiencies in access to health care including poor quality of health services, socio-cultural factors, and access issues related to the poor status of women. To address these problems, a participatory approach was used to bring Christian women from various denominations in Eastern Nigeria together. With technical assistance from a research unit in a university in Eastern Nigeria, the women were able to implement a Safe Motherhood project starting from needs assessment to program evaluation. Lessons learned from this program approach are discussed.

Linking and integrating computers for maternity care.

PubMed

Lumb, M; Fawdry, R

1990-12-01

Functionally separate computer systems have been developed for many different areas relevant to maternity care, e.g. maternity data collection, pathology and imaging reports, staff rostering, personnel, accounting, audit, primary care etc. Using land lines, modems and network gateways, many such quite distinct computer programs or databases can be made accessible from a single terminal. If computer systems are to attain their full potential for the improvement of the maternity care, there will be a need not only for terminal emulation but also for more complex integration. Major obstacles must be overcome before such integration is widely achieved. Technical and conceptual progress towards overcoming these problems is discussed, with particular reference to the OSI (open systems interconnection) initiative, to the Read clinical classification and to the MUMMIES CBS (Common Basic Specification) Maternity Care Project. The issue of confidentiality is also briefly explored.

32 CFR 65.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-called `A' School). (3) In the case of members of the Air Force, Basic Military Training and Technical..., U.S.C. Entry Level and Skill Training. (1) In the case of members of the Army, Basic Combat Training and Advanced Individual Training, which includes members attending One Station Unit Training (OSUT...

38 CFR 21.9505 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (Authority: 38 U.S.C. 3034(a), 3323(a), 3680(g)) Entry level and skill training means— (1) Basic Combat Training and Advanced Individual Training for members of the Army; (2) Recruit Training (Boot Camp) and Skill Training (“A” School) for members of the Navy; (3) Basic Military Training and Technical Training...

47 CFR 76.611 - Cable television basic signal leakage performance criteria.

Code of Federal Regulations, 2014 CFR

2014-10-01

... average power level of the strongest cable television carrier on the system. (c) In paragraph (a)(1) and... 47 Telecommunication 4 2014-10-01 2014-10-01 false Cable television basic signal leakage...) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Technical Standards § 76.611 Cable...

47 CFR 76.611 - Cable television basic signal leakage performance criteria.

Code of Federal Regulations, 2013 CFR

2013-10-01

... average power level of the strongest cable television carrier on the system. (c) In paragraph (a)(1) and... 47 Telecommunication 4 2013-10-01 2013-10-01 false Cable television basic signal leakage...) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Technical Standards § 76.611 Cable...

47 CFR 76.611 - Cable television basic signal leakage performance criteria.

Code of Federal Regulations, 2012 CFR

2012-10-01

... average power level of the strongest cable television carrier on the system. (c) In paragraph (a)(1) and... 47 Telecommunication 4 2012-10-01 2012-10-01 false Cable television basic signal leakage...) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Technical Standards § 76.611 Cable...

Welding. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Browning, Terry

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Machine Shop Practice, 13-2. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Army Ordnance Center and School, Aberdeen Proving Ground, MD.

This military-developed text consists of self-instructional materials dealing with the basic tools and equipment used in metalworking shops. Covered in the individual lessons are the following topics: materials and processes; shop mathematics; blueprint reading and sketching; handtools, measuring instruments, and basic metalworking machines;…

A Suggested Basic Course Outline for Industrial Electronics.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Vocational Instructional Services.

This course outline for industrial electronics, one of a series for teaching vocational industrial shop subjects in public schools, includes basic skills and technical information for the course. It should be supplemented with other complementary and necessary areas of related instruction. Fifteen major blocks, divided into 2 years of instruction,…

Project Trade Related Reading Packets for Disabled Readers. Final Report 1984-85.

ERIC Educational Resources Information Center

Davis, Beverly; Woodruff, Nancy S.

A comprehensive, shop-related curriculum was developed for special needs students who are severely disabled readers. The basic approach of the curriculum was to provide individualized diagnostic-prescriptive materials that correlate basic reading skills and the required vocational and technical concepts. Trade-related packets were written for…

Space Solar Power Demonstrations: Challenges and Progress

NASA Technical Reports Server (NTRS)

Howell, Joe T.; Mankins, John C.; Lavoie, Anthony R. (Technical Monitor)

2002-01-01

The prospects of using electrical power beamed from space are coming closer to reality with the continued pursuit and improvements in the supporting space solar research and technology. Space Solar Power (SSP) has been explored off and on for approximately three decades as a viable alternative and clean energy source. Results produced through the more recent Space Solar Power Exploratory Research and Technology (SERT) program involving extensive participation by industry, universities, and government has provided a sound technical basis for believing that technology can be improved to the extent that SSP systems can be built, economically feasible, and successfully deployed in space. Considerable advancements have been made in conceptual designs and supporting technologies including solar power generation, wireless power transmission, power management distribution, thermal management and materials, and the integrated systems engineering assessments. Basic technologies have progressed to the point were the next logical step is to formulate and conduct sophisticated demonstrations involving prototype hardware as final proof of concepts and identify high end technology readiness levels in preparation for full scale SSP systems designs. In addition to continued technical development issues, environmental and safety issues must be addressed and appropriate actions taken to reassure the public and prepare them for the future use of this alternative renewable energy resource. Accomplishing these objectives will allow informed future decisions regarding further SSP and related R&D investments by both NASA management and prospective external partners. In particular, accomplishing these objectives will also guide further definition of SSP and related technology roadmaps including performance objectives, resources and schedules; including 'multi-purpose' applications (terrestrial markets, science, commercial development of space, and other government missions).

BASiCS: Bayesian Analysis of Single-Cell Sequencing Data

PubMed Central

Vallejos, Catalina A.; Marioni, John C.; Richardson, Sylvia

2015-01-01

Single-cell mRNA sequencing can uncover novel cell-to-cell heterogeneity in gene expression levels in seemingly homogeneous populations of cells. However, these experiments are prone to high levels of unexplained technical noise, creating new challenges for identifying genes that show genuine heterogeneous expression within the population of cells under study. BASiCS (Bayesian Analysis of Single-Cell Sequencing data) is an integrated Bayesian hierarchical model where: (i) cell-specific normalisation constants are estimated as part of the model parameters, (ii) technical variability is quantified based on spike-in genes that are artificially introduced to each analysed cell’s lysate and (iii) the total variability of the expression counts is decomposed into technical and biological components. BASiCS also provides an intuitive detection criterion for highly (or lowly) variable genes within the population of cells under study. This is formalised by means of tail posterior probabilities associated to high (or low) biological cell-to-cell variance contributions, quantities that can be easily interpreted by users. We demonstrate our method using gene expression measurements from mouse Embryonic Stem Cells. Cross-validation and meaningful enrichment of gene ontology categories within genes classified as highly (or lowly) variable supports the efficacy of our approach. PMID:26107944

BASiCS: Bayesian Analysis of Single-Cell Sequencing Data.

PubMed

Vallejos, Catalina A; Marioni, John C; Richardson, Sylvia

2015-06-01

Single-cell mRNA sequencing can uncover novel cell-to-cell heterogeneity in gene expression levels in seemingly homogeneous populations of cells. However, these experiments are prone to high levels of unexplained technical noise, creating new challenges for identifying genes that show genuine heterogeneous expression within the population of cells under study. BASiCS (Bayesian Analysis of Single-Cell Sequencing data) is an integrated Bayesian hierarchical model where: (i) cell-specific normalisation constants are estimated as part of the model parameters, (ii) technical variability is quantified based on spike-in genes that are artificially introduced to each analysed cell's lysate and (iii) the total variability of the expression counts is decomposed into technical and biological components. BASiCS also provides an intuitive detection criterion for highly (or lowly) variable genes within the population of cells under study. This is formalised by means of tail posterior probabilities associated to high (or low) biological cell-to-cell variance contributions, quantities that can be easily interpreted by users. We demonstrate our method using gene expression measurements from mouse Embryonic Stem Cells. Cross-validation and meaningful enrichment of gene ontology categories within genes classified as highly (or lowly) variable supports the efficacy of our approach.

78 FR 44104 - Notice of Intent To Issue a Funding Opportunity Announcement; Technical Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-23

... Funding Opportunity Announcement; Technical Assistance AGENCY: Federal Energy Management Program, Office.... This notice also is to inform Federal agencies of the availability of technical assistance in advance.... FOR FURTHER INFORMATION CONTACT: For requests for technical assistance regarding CHP, please contact...

48 CFR 952.242-70 - Technical direction.

Code of Federal Regulations, 2010 CFR

2010-10-01

... contract. (d) All technical direction shall be issued in writing by the COR. (e) The Contractor must... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technical direction. 952... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.242-70 Technical...

75 FR 37722 - OMB Approvals Under the Paperwork Reduction Act; Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-30

... since its last update. B. Why is this Technical Amendment Issued as a Final Rule? The information... provisions since the last update of this table. The paperwork burden associated with these new provisions was... amendment updates the table that lists the Office of Management and Budget (OMB) control numbers issued...

Educational Reform and the World of Work: Italy

ERIC Educational Resources Information Center

von Blumenthal, Viktor

1977-01-01

One of a four-issue series on educational reform and the world of work in Europe, this issue discusses educational planning and secondary school reform in Italy. Topics discussed include planning and research in vocational-technical education, and the relation between acquisition of specific skills and scientific and technical progress. (Author/DB)

Metric Conversion in the Construction Industries--Technical Issues and Status.

ERIC Educational Resources Information Center

Milton, Hans J.; Berry, Sandra A.

This Special Publication was prepared at the request of the Metric Symposium Planning Committee of the National Institute of Building Sciences (NIBS). It is intended to provide information on technical issues and status of metric conversion in the United States construction industries. It was made available to attendees at the NIBS Symposium on…

The Future of the National Technical Information Service: Issues and Options.

ERIC Educational Resources Information Center

McClure, Charles R.

In recent years there has been considerable debate about the appropriate role, management structure, and activities for the National Technical Information Service (NTIS). This background paper identifies key issues that require attention by Congress and by NTIS itself to increase the effectiveness of NTIS in the collection and dissemination of…

Vocational and Technical Education in Lebanon: Strategic Issues and Challenges

ERIC Educational Resources Information Center

Karam, Gebran

2006-01-01

The current status of the Lebanese vocational and technical education (VTE) system is assessed and the strategic issues and challenges facing it are identified. In addition to the economic and social challenges that are common to many developing countries, the Lebanese system suffers from idiosyncratic problems, which may require innovative and…

Education and Training. Annotated Bibliography. Author and Subject Index.

ERIC Educational Resources Information Center

United Nations Food and Agriculture Organization, Rome (Italy).

Food and Agriculture Organization (FAO) publications and documents issued by the Human Resources and Institutions division and by other technical divisions in the technical, economic, and social fields are selected, annotated and indexed in this bibliography. Documents issued prior to 1967 are not included but can be found in the Rural…

Peer Review of a Formal Verification/Design Proof Methodology

NASA Technical Reports Server (NTRS)

1983-01-01

The role of formal verification techniques in system validation was examined. The value and the state of the art of performance proving for fault-tolerant compuers were assessed. The investigation, development, and evaluation of performance proving tools were reviewed. The technical issues related to proof methodologies are examined. The technical issues discussed are summarized.

Understanding the "Crisis" in Basic Skills: Framing the Issues in Community Colleges. Basic Skills Instruction in California Community Colleges. Working Paper, Number 1

ERIC Educational Resources Information Center

Grubb, W. Norton; Boner, Elizabeth; Frankel, Kate; Parker, Lynette; Patterson, David; Gabriner, Robert; Hope, Laura; Schiorring, Eva; Smith, Bruce; Taylor, Richard; Walton, Ian; Wilson, Smokey

2011-01-01

While increases in remedial education (or basic skills instruction or developmental education) have taken place at several levels of the education and training system, there are reasons for thinking that the issue is particularly acute in community colleges. This introductory working paper divides the problem into two. The first is the high…

An Educational Multimedia Presentation on the Introduction to Spacecraft Charging

NASA Technical Reports Server (NTRS)

Lin, E.; dePayrebrune, M.

2004-01-01

Over the last few decades, significant knowledge has been gained in how to protect spacecraft from charging; however, the continuing technical advancement in the design and build of satellites requires on-going effort in the study of spacecraft charging. A situation that we have encountered is that not all satellite designers and builders are familiar with the problem of spacecraft charging. The design of a satellite involves many talented people with diverse backgrounds, ranging from manufacturing and assembly to engineering and program management. The complex design and build of a satellite system requires people with highly specialized skills such that cross-specialization is often not achievable. As a result, designers and builders of satellites are not usually familiar with the problems outside their specialization. This is also true for spacecraft charging. Not everyone is familiar with the definition of spacecraft charging and the damage that spacecraft charging can cause. Understanding the problem is an important first step in getting everyone involved in addressing the appropriate spacecraft charging issues during the satellite design and build phases. To address this important first step, an educational multimedia presentation has been created to inform the general engineering community about the basics of spacecraft charging. The content of this educational presentation is based on relevant published technical papers. The presentation was developed using Macromedia Flash. This software produces a more dynamic learning environment than a typical slide show , resulting in a more effective learning experience. The end result is that the viewer will have learned about the basics of spacecraft charging. This presentation is available to the public through our website, www.dplscience.com, free of charge. Viewers are encouraged to pass this presentation to colleagues within their own work environment. This paper describes the content of the multimedia presentation.

A basic interpretation of the technical language of radiation processing

NASA Astrophysics Data System (ADS)

Deeley, Catherine M.

2004-09-01

For the food producer contemplating the purchase of radiation processing equipment the task of evaluating the strengths and weaknesses of the available technologies, electron beam (E-beam), X-ray and gamma, to determine the best option for their application, is onerous. Not only is the level of investment daunting but also, to be sure of comparing like with like, the evaluator requires a basic understanding of the science underpinning radiation processing. There have been many papers published that provide technical specialists with a rigorous interpretation of this science (In: Gaughran, E.R.L., Goudie, A.J. (Eds.), Technical Developments and Prospects of Sterilization by Ionizing Radiation, International Conference, Vienna. Multiscience Publications Ltd., pp. 145-172). The objective for this paper is to give non-specialists an introduction to the language of radiation processing and to clarify some of the terminology associated with the use of radioactive sources for this application.

Unified Technical Concepts. Application Modules Volume I.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Unified Technical Concepts (UTC) is a modular system for teaching applied physics in two-year postsecondary technician programs. This UTC laboratory textbook, the first of two volumes, consists of 56 learning modules dealing with basic concepts of physics. Addressed in the individual chapters of the guide are the following topics: force, work,…

Assessing the Validity of Air Force Selection and Training Strategies.

ERIC Educational Resources Information Center

Mumford, Michael D.; And Others

A study was undertaken to develop a system for predicting the impact of adjustments in aptitude requirements on outcomes (performance) in Air Force basic resident technical training. To accomplish this, a multivariate modeling approach was used. Initially, interviews were constructed within a variety of technical training programs to specify the…

United States Air Force Training Line Simulator. Final Report.

ERIC Educational Resources Information Center

Nauta, Franz; Pierce, Michael B.

This report describes the technical aspects and potential applications of a computer-based model simulating the flow of airmen through basic training and entry-level technical training. The objective of the simulation is to assess the impacts of alternative recruit classification and training policies under a wide variety of assumptions regarding…

Weather Observer, 15-1. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, was designed to upgrade an apprentice weather observer to the weather observer specialist level. Intended to be used in a laboratory or on-the-job learning situation, it contains both basic information needed for review and supervisory…

Defense Technical Information Center thesaurus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickert, J.H.

This DTIC Thesaurus provides a basic multidisciplinary subject term vocabulary used by DTIC to index and retrieve scientific and technical information from its various data bases and to aid DTIC`s users in their information storage and retrieval operations. It includes an alphabetical posting term display, a hierarchy display, and a Keywork Out of Context (KWOC) display.

Industrial Arts Curriculum Guide in Basic Technical Drafting. Bulletin No. 1686.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This curriculum guide contains operational guidelines to help local administrators, teacher educators, and industrial arts teachers in the State of Louisiana determine the extent to which their technical drafting courses are meeting the needs of the youth they serve. It consists of a discussion of course prerequisites, goals, content, and…

Pennsylvania Blue Shield Job Linked Skills Program. Teacher's Manual [and] Technical Manual.

ERIC Educational Resources Information Center

Pennsylvania State Univ., University Park. Inst. for the Study of Adult Literacy.

Two closely related publications from the same project, a Teacher's Manual" and a "Technical Manual", are combined here. These manuals are intended to accompany a work force literacy course designed to meet the basic skills needs of midliterate adults employed or preparing for employment in the health insurance industry.…

Interactive Methods of Teaching Physics at Technical Universities

ERIC Educational Resources Information Center

Krišták, L'uboš; Nemec, Miroslav; Danihelová, Zuzana

2014-01-01

The paper presents results of "non-traditional" teaching of the basic course of Physics in the first year of study at the Technical University in Zvolen, specifically teaching via interactive method enriched with problem tasks and experiments. This paper presents also research results of the use of the given method in conditions of…

New Training Technologies. Studies on Technical and Vocational Education 2.

ERIC Educational Resources Information Center

Herremans, Albert

This book is the second in a series aiming to promote international exchange of ideas, experiences, and studies relating to technical and vocational education. Information provided is designed to help educators and trainers plan for an intelligent use of new training technologies (NTTs) to improve the access to basic and advanced lifelong learning…

Demonstration and Research Program for Teaching Young String Players. Final Report.

ERIC Educational Resources Information Center

Yarborough, William

This report explains a system for rapidly training beginning students in the technical aspects of playing a stringed instrument. The program also affords them a well-rounded, basic knowledge of music. A "numerical" method of notation and concentrated muscular exercises greatly speeded the technical learning process. The daily coordination of ear…

Voprosy professional'noj pedagogiki (Aspects of the Theory of Vocational Education).

ERIC Educational Resources Information Center

Batysev, S. J.; And Others

This document is an English-language abstract (Approximately 1,500 words) of a book by several Soviet authorities on vocational and technical education. The five sections of the book deal with general aspects of vocational and technical training; the theory of vocational training; psychological aspects of vocational training; basic instructional…

SURVEY OF INFORMATION ON VOCATIONAL AND TECHNICAL EDUCATION IN THE STATE OF ILLINOIS. FINAL REPORT.

ERIC Educational Resources Information Center

Corplan Associates, Chicago, IL. Technology Center.

THE BASIC OBJECTIVE OF THE SURVEY WAS TO GATHER INFORMATION HELPFUL IN PLANNING AND DEVELOPING VOCATIONAL AND TECHNICAL EDUCATION PRIMARILY WITHIN THE PUBLIC SCHOOL SYSTEM. OCCUPATIONAL NEEDS WERE IDENTIFIED FROM FORECASTS OF CHANGES IN CURRENT OCCUPATIONS, AN ANALYSIS OF THE IMPLICATIONS OF SCIENTIFIC AND TECHNOLOGICAL DEVELOPMENTS, AND…

Scientific and Technical Information Transfer for Education (STITE). Research Report No. 2.

ERIC Educational Resources Information Center

Zunde, Pranas

STITE (Scientific and Technical Information Transfer for Education) is basically a system to interface between science information and the science learner. As such STITE acts as a link between STIC (Science and Technology Infromation Centers) and LIS (Learning Information Systems). In this second progress report the internal knowledge of STITE is…

Basic EMC Technology Advancement for C3 Systems - Model Revision for IEMCAP. Volume 5

DTIC Science & Technology

1984-10-01

important asset. 126 REFERENCES [1] J. L. Bogdanor , et. al., Inttasystem Electromagnetic Compatibility Analy- sis Program, Technical Report, RADC-TR-74...Method of Moments, Technical Report, RADC-TR-82-286, Vol. IV A, Rome Air Development Center, Griffiss AFB, NY, November 1982. [30] J. B. Bogdanor , M. D

Construction Surveying, 3-27. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This short course on construction surveying was developed from military curriculum materials for use in technical and vocational education programs. Students completing the course should be able to perform engineering surveys related to area and route surveying (knowledge of basic survey techniques is a prerequisite). The course is divided into…

Subsistence Specialist First Class, 9-11. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This self-paced, individualized course, adapted from military curriculum materials for use in vocational and technical education, teaches students about the basic training and supervisory techniques required for proper sanitation of food service personnel and kitchen and dining facility equipment. This student workbook, one of three parts of the…

78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-13

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD13-6-000] Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory... related to the reliability of the Bulk-Power System. A more formal agenda will be issued at a later date...

Initiatives in Technical and Further Education. Numbers 3 and 4.

ERIC Educational Resources Information Center

National TAFE Clearinghouse, Adelaide (Australia).

These two issues contain abstracts of 127 and 118 documents, respectively, related to the field of technical and further education that are available through the Australian Technical and Further Education (TAFE) Clearinghouse system. These types of materials are included: research reports/technical reports, evaluation studies, curriculum materials…

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2010 CFR

2010-10-01

... directive whatever. (d) All technical directions must be issued in writing by the project officer or must be... advise the contractor in writing that, in the contracting officer's opinion, the technical direction is... subject to the technical direction of the NRC project officer. The term technical direction is defined to...

48 CFR 1552.237-71 - Technical direction.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... (d) Technical direction will be issued in writing or confirmed in writing within five (5) days after... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Technical direction. 1552... Technical direction. As prescribed in 1537.110, insert a clause substantially the same as the following...

76 FR 60029 - Notice of Issuance Technical Bulletin 2011-2, Extended Deferral of the Effective Date of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Notice of Issuance Technical Bulletin 2011-2, Extended Deferral of the Effective Date of Technical Bulletin 2006-1 AGENCY: Federal Accounting Standards Advisory... hereby given that the Federal Accounting Standards Advisory Board (FASAB) has issued Technical Bulletin...

Technical and Vocational Education in Nigeria: Issues, Challenges and a Way Forward

ERIC Educational Resources Information Center

Okoye, Reko; Arimonu, Maxwell Onyenwe

2016-01-01

Technical education, as enshrined in the Nigerian national policy on education, is concerned with qualitative technological human resources development directed towards a national pool of skilled and self reliant craftsmen, technicians and technologists in technical and vocational education fields. In Nigeria, the training of technical personnel…

Improved Management of the Technical Interfaces Between the Hanford Tank Farm Operator and the Hanford Waste Treatment Plant - 13383

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duncan, Garth M.; Saunders, Scott A.

2013-07-01

The Department of Energy (DOE) is constructing the Waste Treatment and Immobilization Plant (WTP) at the Hanford site in Washington to treat and immobilize approximately 114 million gallons of high level radioactive waste (after all retrievals are accomplished). In order for the WTP to be designed and operated successfully, close coordination between the WTP engineering, procurement, and construction contractor, Bechtel National, Inc. and the tank farms operating contractor (TOC), Washington River Protection Solutions, LLC, is necessary. To develop optimal solutions for DOE and for the treatment of the waste, it is important to deal with the fact that two differentmore » prime contractors, with somewhat differing contracts, are tasked with retrieving and delivering the waste and for treating and immobilizing that waste. The WTP and the TOC have over the years cooperated to manage the technical interface. To manage what is becoming a much more complicated interface as the WTP design progresses and new technical issues have been identified, an organizational change was made by WTP and TOC in November of 2011. This organizational change created a co-located integrated project team (IPT) to deal with mutual and interface issues. The Technical Organization within the One System IPT includes employees from both TOC and WTP. This team has worked on a variety of technical issues of mutual interest and concern. Technical issues currently being addressed include: - The waste acceptance criteria; - Waste feed delivery and the associated data quality objectives (DQO); - Evaluation of the effects of performing a riser cut on a single shell tank on WTP operations; - The disposition of secondary waste from both TOC and WTP; - The close coordination of the TOC double shell tank mixing and sampling program and the Large Scale Integrated Test (LSIT) program for pulse jet mixers at WTP along with the associated responses to the Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2010-2; - Development of a set of alternatives to the current baseline that involve aspects of direct feed, feed conditioning, and design changes. The One System Technical Organization has served WTP, TOC, and DOE well in managing and resolving issues at the interface. This paper describes the organizational structure used to improve the interface and several examples of technical interface issues that have been successfully addressed by the new organization. (authors)« less

Exercise redox biochemistry: Conceptual, methodological and technical recommendations.

PubMed

Cobley, James N; Close, Graeme L; Bailey, Damian M; Davison, Gareth W

2017-08-01

Exercise redox biochemistry is of considerable interest owing to its translational value in health and disease. However, unaddressed conceptual, methodological and technical issues complicate attempts to unravel how exercise alters redox homeostasis in health and disease. Conceptual issues relate to misunderstandings that arise when the chemical heterogeneity of redox biology is disregarded: which often complicates attempts to use redox-active compounds and assess redox signalling. Further, that oxidised macromolecule adduct levels reflect formation and repair is seldom considered. Methodological and technical issues relate to the use of out-dated assays and/or inappropriate sample preparation techniques that confound biochemical redox analysis. After considering each of the aforementioned issues, we outline how each issue can be resolved and provide a unifying set of recommendations. We specifically recommend that investigators: consider chemical heterogeneity, use redox-active compounds judiciously, abandon flawed assays, carefully prepare samples and assay buffers, consider repair/metabolism, use multiple biomarkers to assess oxidative damage and redox signalling. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Educating and training industrial ecologists for the 1990s.

PubMed

Troxell, D E

1992-02-01

For industrial ecology to become a reality and flourish, many talents must be integrated into a single system. Basically, there are four types of technologists who must be brought together to create a system: (i) technical specialists-those that can take the state of knowledge to the state of the art and eventually to the state of practice; (ii) technical "generalists"-those that can integrate diverse technologies into a comprehensive solution; (iii) technical managers-those that can lead technical efforts to an optimal solution (these people must have management skills in their area); and (iv) program managers-those that can understand and merge the overall efforts of technology, business, schedule, and finance. The initial questions for industrial ecology in the 1990s are: Do these people presently exist in industry? What will be needed to bring new people (recent graduates) into the field of industrial ecology? For this decade, the people who will develop and lead the concept of industrial ecology are presently in industry. However, certainly few, if any, today understand the concept of industrial ecology as a system issue. Training will be needed for these practitioners of the 1990s so that the overall goal and the mechanism for achieving industrial ecology are understood. A three-tiered approach is presented to define the education/training needed, to conduct training on an industry basis, and then to initiate the training to be done within a corporation. The three tiers propose the use of universities, professional societies, and industry groups. Having universities participate in the training of the 1990s industrial ecologists will give universities insight to the development of industrial ecology, and access to industry needs so that curriculum can be initiated to educate the industrial ecologists of the future.

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 21: Basic Transistor Theory; Module 21T: Multi-Element Vacuum Tubes. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This set of individualized learning modules on transistor theory is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Two modules are included in…

Ground Water Technical Considerations during the Five-Year Review Process

EPA Pesticide Factsheets

This issue paper has been developed to highlight technical considerations as well as technical resources available to Remedial Project Managers (RPMs) in conducting Five-Year Reviews (FYRs) at CERCLA1 sites with contaminated groundwater.

Iridium: failures & successes

NASA Astrophysics Data System (ADS)

Christensen, CarissaBryce; Beard, Suzette

2001-03-01

This paper will provide an overview of the Iridium business venture in terms of the challenges faced, the successes achieved, and the causes of the ultimate failure of the venture — bankruptcy and system de-orbit. The paper will address technical, business, and policy issues. The intent of the paper is to provide a balanced and accurate overview of the Iridium experience, to aid future decision-making by policy makers, the business community, and technical experts. Key topics will include the history of the program, the objectives and decision-making of Motorola, the market research and analysis conducted, partnering strategies and their impact, consumer equipment availability, and technical issues — target performance, performance achieved, technical accomplishments, and expected and unexpected technical challenges. The paper will use as sources trade media and business articles on the Iridium program, technical papers and conference presentations, Wall Street analyst's reports, and, where possible, interviews with participants and close observers.

PREFACE: Ferrofluids

NASA Astrophysics Data System (ADS)

Odenbach, Professor Stefan

2006-09-01

This issue of Journal of Physics: Condensed Matter is dedicated to results in the field of ferrofluid research. Ferrofluids—suspensions of magnetic nanoparticles—exhibit as a specific feature the magnetic control of their physical parameters and of flows appearing in such fluids. This magnetic control can be achieved by means of moderate magnetic fields with a strength of the order of 10 mT. This sort of magnetic control also enables the design of a wide variety of technical applications such as the use of the magnetic forces for basic research in fluid dynamics. The overall field of ferrofluid research is already about 40 years old. Starting with the first patent on the synthesis of magnetic nanoparticle suspensions by S Papell in 1964, a vivid field of research activities has been established. Looking at the long time in which ferrofluids have been the focus of scientific interest, one can ask the question, what kind of recent developments justify a special issue of a scientific journal? New developments in a field, which depends strongly on a certain material class and which opens research possibilities in different scientific fields will nowadays usually require an interdisciplinary approach. This kind of approach starting from the synthesis of magnetic suspensions, including research concerning their basic properties and flow behaviour and focusing on new applications has been the core of a special research programme funded by the Deutsche Forschungsgemeinschaft (DFG) over the past 6 years. Within this programme—entitled `Colloidal Magnetic Fluids: Basics, Synthesis and Applications of New Ferrofluids'—more than 30 different research groups have been coordinated to achieve new results in various fields related to ferrofluid research. The basic approach of the program has been the assumption that new applications well beyond the typical ferrofluid techniques, for example loud speaker cooling or sealing of rotary shafts, will require tailored magnetic suspensions with properties clearly focused towards the need of the application. While such tailoring of fluids to certain well defined properties sounds like a straightforward approach one has to face the fact that it requires a clear definition of the required properties. This definition itself has to be based on a fundamental physical knowledge of the processes determining certain magnetically controlled phenomena in ferrofluids. To make this point concrete one can look into the detailed aims of the mentioned research program. The application areas identified for the future development of research and application of suspensions of magnetic nanoparticles have been on the one hand the biomedical application—especially with respect to cancer treatment—and on the other hand the use of magnetically controlled rheological properties of ferrofluids for new active technical devices. Both directions require, as mentioned, as a basis for success the synthesis of new ferrofluids with dedicated properties. While the medical applications have to rely on biocompatibility as well as on stability of the suspensions in a biomedical environment, the use of ferrofluids in technical devices employing their magnetically controlled rheological properties will depend on an enhancement of the changes of the fluid's viscous properties in the presence of moderate magnetic fields. For both requirements ferrofluids with a make up clearly different from the usual magnetite based fluids have to be synthesized. The question of how the detailed microscopic make up of the fluids would have to look has to be answered on the basis of basic research results defining the physics background of the respective phenomena. Taking these aspects together it becomes obvious that the aforementioned research program had goals aiming far beyond the state of the art of classical ferrofluid research. These goals as well as the basic strategy to achieve them is in a way reflected by the structure of this issue of Journal of Physics: Condensed Matter. The issue contains results emerging from the research programme as well as invited papers from researchers not participating in the programme but working in closely related areas. The issue is subdivided into five main sections dealing with synthesis, basic physical description, rheology, and both the medical and technical applications of ferrofluids. As can be expected from work done within an interdisciplinary context many of the papers would fit into more than one of these sections and catagorization is thus sometimes difficult. We have therefore tried to place them into the section reflecting the main field of research to which the respective results belong. The first section is on synthesis and characterization of magnetic suspensions. The first paper in this section is dedicated partly to magnetite ferrofluids but with special aspects concerning the particle size tailoring them for applications especially in the field of magnetic hyperthermia. After this, three different types of `new' ferrofluids are presented. Fluids based on pure metal particles exhibiting much stronger magnetic properties than the common magnetite fluids, fluids with a temperature sensitive surfactant shell allowing a change of the particle’s hydrodynamic diameter by variation of the fluid’s temperature and fluids containing spheres of nonmagnetic material with embedded magnetic particles which are already used in new medical applications. The second section is dedicated to the basic physics of ferrofluids and highlights three different topics. First the question of magnetization dynamics is discussed and different aspects of this fundamental problem, which determines the basic description of ferrofluids, are highlighted. The second topic is the well known surface instability appearing in ferrofluids in a homogeneous magnetic field perpendicular to the fluid surface. This part shows clearly how many undiscovered phenomena can be found, even in an area which is as old as the whole research field, if an appropriate measuring technique is used and fresh ideas help to find unexpected effects. The last part of this section deals with the question of dynamics and structure of ferrofluids and shows the experimental possibilities of scattering techniques in this field. Within the third section the question of field dependent changes of the rheological behaviour of ferrofluids is discussed. The first three papers provide theoretical approaches for the understanding of the connection between the rheological properties and shear and field induced changes in the fluid’s microstructure. The fourth paper provides the related experimental results showing the combination of microstructural and rheological measurements under well defined conditions. The last paper of this section does not directly belong to ferrofluid research but to a closely related field—so called magneto-rheological (MR) suspensions, which differ from ferrofluids mainly by the size of the suspended particles and the strength of the rheological effects. As modern theoretical approaches, like the one discussed by Liu et al in the second section have shown, the relation between the effects in ferrofluids and those in MR fluids is so close that it could probably be described in a common theory. Sections four and five contain the application orientated results. In the fourth section the medical applications are the focus of interest. The section starts with a paper which could have also been placed in the synthesis section—the growth of magnetotactic bacteria and the extraction of the magnetic particles produced by these bacteria. The paper also contains information about the characterization of the particles especially with respect to their application. The characterization aspect is then continued in two papers outlining new diagnostic techniques with close relation to future biomedical application of magnetic fluids. Next in vitro applications, especially questions of cell separation using magnetic forces, are highlighted before the final papers address the therapeutic aspects of magnetic drug targeting and magnetic hyperthermia. Finally the fifth section describes three different new approaches for the technical use of ferrofluids. Again, the specialized design of the fluids themselves is an important step towards the new application goals. Altogether the papers within this issue outline the unique potential of magnetically controlled suspensions, the interdisciplinary nature of the related research and the prospects of strongly networked and interdisciplinary activities in the field. I hope that it will give an insight into the fascination of ferrofluid research and a feeling for the advances made in the past years.

Reader-Centered Technical Writing

NASA Astrophysics Data System (ADS)

Narayanan, M.

2012-12-01

Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into an old schema. This reinforces basic engineering and mathematical design concepts. Accommodation: Here, it may work in a different manner. Writers may have to accommodate an old schema to a new object. This helps engineers to focus more on applications. Adaptation: Assimilation and accommodation are the two sides of adaptation, Jean Piaget's term for what most of us would call learning. Mathematical design concepts generated by students should be suitable for creative engineering applications. References : Phillips, D. C. and Soltis, Jonas F. (2003) "Piagetian Structures and Psychological Constructivism," in Perspectives on Learning (4th edition). New York: Teachers College Press. Salvo, Michael J. (2001). Ethics of Engagement: User-Centered Design and Rhetorical Methodology. Technical Communication Quarterly Volume 10, Issue 3, 2001. pages 273-290. http://www.ship.edu/~cgboeree/piaget.html http://owl.english.purdue.edu/owl/resource/624/01/

Technical clarity in inter-agency negotiations: Lessons from four hydropower projects

USGS Publications Warehouse

Burkardt, Nina; Lamb, Berton Lee; Taylor, Jonathan G.; Waddle, Terry J.

1995-01-01

We investigated the effect of technical clarity on success in multi-party negotiations in the Federal Energy Regulatory Commission (FERC) licensing process. Technical clarity is the shared understanding of dimensions such as the geographic extent of the project, range of flows to be considered, important species and life stages, and variety of water uses considered. The results of four hydropower licensing consultations are reported. Key participants were interviewed to ascertain the level of technical clarity present during the consultations and the degree to which the consultations were successful. Technical clarity appears to be a prerequisite for successful outcomes. Factors that enhance technical clarity include simple project design, new rather than existing projects, precise definition of issues, a sense of urgency to reach agreement, a sense of fairness among participants, and consistency in participation. Negotiators should not neglect the critical pre-negotiation steps of defining technical issues and determining appropriate studies, deciding how to interpret studies, and agreeing on responses to study results.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program's function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned-standards integration system. The Program maintains a 'one stop-shop' Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, WIlliam W.

2003-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program s function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned - standards integration system. The Program maintains a "one stop-shop" Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

Utility interface issues for grid-connected photovoltaic systems

NASA Astrophysics Data System (ADS)

Chu, D.; Key, T.; Fitzer, J.

Photovoltaic (PV) balance-of-system research and development has focused on interconnection with the utility grid as the most promising future application for photovoltaic energy production. These sysems must be compatible with the existing utility grid to be accepted. Compatibility encompasses many technical, economic and institutional issues, from lineman safety to revenue metering and power quality. This paper reviews DOE/PV sponsored research for two of the technical interconnection issues: harmonic injection, and power factor control. Explanations and rationale behind these two issues will be reviewed, and the status of current research and plans for required future work will be presented.

Automotive Mechanics. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Brown, Desmond

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Design Drafting. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Sharkey, Jeff

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

An Assessment of the Basic Curriculum Guide for Teaching Vocational Agriculture in Texas.

ERIC Educational Resources Information Center

Brown, Herman D.

The major purpose of this study was to revise the basic production agriculture curriculum guide used by vocational agrculture teachers in Texas. A twenty-five member advisory committee for curriculum revision conducted the following activities: (1) obtained thirty-one curriculum guides for a technical agriculture program, (2) surveyed vocational…

Validation of the Military Entrance Physical Strength Capacity Test. Technical Report 610.

ERIC Educational Resources Information Center

Myers, David C.; And Others

A battery of physical ability tests was validated using a predictive, criterion-related strategy. The battery was given to 1,003 female soldiers and 980 male soldiers before they had begun Army Basic Training. Criterion measures which represented physical competency in Basic Training (physical proficiency tests, sick call, profiles, and separation…

Marine Trades. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Abbott, Alan

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Fashion Merchandising. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Williams, Edwina

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Food Services. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Vastano, Josephine; And Others

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Recreational Vehicle Maintenance and Repair. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Felice, Michael

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Application of the Virginia STEPS (Student/Teacher Education Planning System) by Basic Skills Education Teachers.

ERIC Educational Resources Information Center

Seguin, Barbara; Swanson, Lois

The Virginia STEPS (Student/Teacher Education Planning System) was developed to enable adult basic education (ABE) students to become independent learners responsible for planning, carrying out, evaluating, and making adjustments in their education. ABE instructors at Blackhawk Technical College in Wisconsin have adapted the STEPS model to make…

Commercial Building Construction (Masonry). COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Keck, Robert

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Plumbing and Heating. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Mahieu, Louis

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Air Conditioning, Refrigeration and Heating. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Hardman, Thomas

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Building Trades. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Gudzak, Raymond

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; a preface; a…

Auto Body Repair. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Ormsbee, Robert

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Measuring the Utility of a Basic French Vocabulary.

ERIC Educational Resources Information Center

Savard, Jean-Guy; Richards, Jack C.

Using frequency, range, availability, and coverage as objectively weighted indices of utility in the development of a basic French vocabulary list, the authors describe the technical procedure used in this study and list the resultant first 153 words according to the four indices and the utility rating. Weighting factors for each index, based on…

Electrical Trades. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Cannone, Richard

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Development and Evaluation of a Vocational Experience Curriculum for Educable and Disadvantaged Students. Final Report.

ERIC Educational Resources Information Center

Hardin County Board of Education, Elizabethtown, KY.

A project was designed to measure the effects of integrating basic reading and mathematical instruction with prevocational instruction through the addition of a basic skills resource room, a technical simulation unit, and guidance and counseling to the ninth grade vocational experience program for educable mentally handicapped and disadvantaged…

Ciclo Basico Polivalente (Basic Comprehensive Courses of Study).

ERIC Educational Resources Information Center

Boletin del Centro Nacional de Documentacion e Informacion Educativa, 1970

1970-01-01

This article discusses the creation of comprehensive secondary schools in Argentina to meet the diversified goals of the population in any given geographical region. The plan described here provides for the creation of several basic-study cycles within one school so that students may pursue courses in commercial, technical, and academic fields.…

Cosmetology/Hairstyling. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Romano, Marie

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Automotive and Diesel Engine Rebuilding. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Salvatore, Gerald

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Custom Cabinetmaking. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Holmes, Kenneth

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Medical Office Receptionist/Assistant. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Gorman, Dolores

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Landscaping and Greenhouse Technology. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Kucharewski, Dennis

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Child Care Aide. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Moore, Pamela Hullen

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Dental Assisting. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Mattia, Nancy

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

75 FR 28610 - Draft EPA's Reanalysis of Key Issues Related to Dioxin Toxicity and Response to NAS Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-21

... SAB will convene an expert panel composed of scientists knowledgeable about technical issues related... consideration. Members of the public who wish to ensure that their technical comments are provided to the SAB... any written public comments that EPA receives in accordance with the detailed instructions provided...

21st Century Educators: Developing and Supporting Great Career and Technical Education Teachers. Special Issues Brief. Revised Edition

ERIC Educational Resources Information Center

Jacques, Catherine; Potemski, Amy

2014-01-01

This Special Issues Brief from the Center on Great Teachers and Leaders (GTL Center) offers insight into three human capital management policies that are critical for career and technical education (CTE) teachers: certification, performance evaluation, and professional development. CTE teachers are uniquely positioned to improve college and career…

INSTITUTE ON CRITICAL ISSUES IN VOCATIONAL AND TECHNICAL TEACHER EDUCATION IN SMALL COLLEGES AND UNIVERSITIES. CENTER SEMINAR AND CONFERENCE REPORT NO. 8.

ERIC Educational Resources Information Center

BELL, A.P.

THIRTY PARTICIPANTS INCLUDING TEACHER EDUCATORS AND ADMINISTRATORS ATTENDED A 2-WEEK TEACHER EDUCATION INSTITUTE DESIGNED TO CONSIDER CRITICAL ISSUES IN VOCATIONAL AND TECHNICAL EDUCATION AND THEIR IMPLICATIONS FOR PROGRAMS OF TEACHER PREPARATION IN SMALL COLLEGES AND UNIVERSITIES. THE PRESENTATIONS BY SPECIAL CONSULTANTS WERE--(1) "CRITICAL…

[Evaluating the efficiency of basic public health service project in Beijing rural areas based on data envelopment analysis].

PubMed

Zhang, Gui-lin; Pan, Xi-long

2013-04-18

To measure the efficiency changes of basic public health service in Beijing rural areas and to provide some suggestions for the basic public health service project throughout China. In the study, stratified random samples from 32 township health centers (THCs) were measured by data envelopment analysis (DEA) model with the panel data from 2007 to 2009. (1) The average total efficiency score of samples was 0.972. The TE non-efficient THCs were with excess in all input indicators and insufficient outputs in technology management, health promotion and chronic disease management. (2) The total factor productivity (TFP) from 2007 to 2008 increased 8.8%, which was attributed to technology change. The TFP decreased by 6.6% from 2008 to 2009, but the technical efficiency increased by 3.3%. There is room for improvemrnt in the basic public health service project in Beijing rural areas. Scale efficiency should be improved and the common development of technical efficiency and technology progress promoted in order to increase the project outputs.

Application of Crushed Concrete in Geotechnical Engineering - Selected Issues

NASA Astrophysics Data System (ADS)

Kawalec, Jacek; Kwiecien, Slawomir; Pilipenko, Anton; Rybak, Jarosław

2017-12-01

The reuse of building materials becomes an important issue in sustainable engineering. As the technical requirements for civil engineering structures changes with time and the life time is limited, the need of building new objects meets the necessity of recycling of the existing ones. In the case of steel structures, the possibility of recycling is obvious, also in the case of wooden constructions, the possibility of “burning” solves the problem. The concrete waste is generated mainly as a result of the demolition and reconstruction of residential and industrial buildings. These types of waste are basically made from crushed rocks and cement minerals and contain non-hydrated cement particles in its composition. Concrete poses a lot of problems mainly for two reasons. It is difficult to crush, heavy and hard to transport and demanding in reuse. Different fractions (particle sizes) may be used for different purposes. Starting from very fine particles which can be used in concrete production, through regular 16-300 mm fractions used to form new fills and fill the mats, up to very irregular mixtures used to form stone columns by means of Impulse Compaction or in Dynamic Replacement. The presented study juxtaposes authors experience with crushed concrete used in civil engineering, mainly in geotechnical projects. Authors’ experiences comprise the application of crushed concrete in the new concrete production in Russia, changing pulverized bridge into the fill of mesh sacks, or mattresses used as an effective way to protect the shoreline and the New Orleans East land bridge after Katrina storm (forming a new shoreline better able to withstand wave actions), and finally the use of very irregular concrete fractions to form stone columns in week soils on the example of railway and road projects in Poland. Selected case studies are presented and summarized with regard to social, technical and economic issues including energy consumption needed for proposed technologies and dynamic impact of ground transmitted vibrations and noise.

LANDFILL GAS ENERGY UTILIZATION EXPERIENCE: DISCUSSION OF TECHNICAL AND NON-TECHNICAL ISSUES, SOLUTIONS, AND TRENDS

EPA Science Inventory

The report discusses technical and non-technical considerations associated with the development and operation of landfill gas to energy projects. Much of the report is based on interviews and site visits with the major developers and operators of the more than 110 projects in the...

BBN technical memorandum W1291 infrasound model feasibility study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrell, T., BBN Systems and Technologies

1998-05-01

The purpose of this study is to determine the need and level of effort required to add existing atmospheric databases and infrasound propagation models to the DOE`s Hydroacoustic Coverage Assessment Model (HydroCAM) [1,2]. The rationale for the study is that the performance of the infrasound monitoring network will be an important factor for both the International Monitoring System (IMS) and US national monitoring capability. Many of the technical issues affecting the design and performance of the infrasound network are directly related to the variability of the atmosphere and the corresponding uncertainties in infrasound propagation. It is clear that the studymore » of these issues will be enhanced by the availability of software tools for easy manipulation and interfacing of various atmospheric databases and infrasound propagation models. In addition, since there are many similarities between propagation in the oceans and in the atmosphere, it is anticipated that much of the software infrastructure developed for hydroacoustic database manipulation and propagation modeling in HydroCAM will be directly extendible to an infrasound capability. The study approach was to talk to the acknowledged domain experts in the infrasound monitoring area to determine: 1. The major technical issues affecting infrasound monitoring network performance. 2. The need for an atmospheric database/infrasound propagation modeling capability similar to HydroCAM. 3. The state of existing infrasound propagation codes and atmospheric databases. 4. A recommended approach for developing the required capabilities. A list of the people who contributed information to this study is provided in Table 1. We also relied on our knowledge of oceanographic and meteorological data sources to determine the availability of atmospheric databases and the feasibility of incorporating this information into the existing HydroCAM geographic database software. This report presents a summary of the need for an integrated infrasound modeling capability in Section 2.0. Section 3.0 provides a recommended approach for developing this capability in two stages; a basic capability and an extended capability. This section includes a discussion of the available static and dynamic databases, and the various modeling tools which are available or could be developed under such a task. The conclusions and recommendations of the study are provided in Section 4.0.« less

CIVIL TECHNOLOGY, HIGHWAY AND STRUCTURAL OPTIONS, A SUGGESTED 2-YEAR POST HIGH SCHOOL CURRICULUM. TECHNICAL EDUCATION PROGRAM SERIES, NUMBER 8.

ERIC Educational Resources Information Center

BEAUMONT, JOHN A; AND OTHERS

DESIGNED TO ASSIST ADMINISTRATORS, SUPERVISORS, AND TEACHERS TO PLAN, DEVELOP, AND EVALUATE PROGRAMS, THIS CURRICULUM GUIDE OFFERS COURSE OUTLINES, PROCEDURES, LABORATORY LAYOUTS, TEXTS AND REFERENCES, LISTS OF LABORATORY EQUIPMENT AND ITS COST, AND A SELECTED LIST OF SCIENTIFIC AND TECHNICAL SOCIETIES. BASIC MATERIALS WERE PREPARED AT THE…

Pharmacy Specialist, 10-8. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

These teacher and student materials for a postsecondary-level course in pharmacy comprise one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. The purpose stated for the 256-hour course is to train students in the basic technical phases of…

Unified Technical Concepts--Phase II. Expand Application to Industrial Technologies and Adult Education. Final Report.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

A project was conducted to develop a laboratory-based instructional system in physics for two-year technician programs that emphasizes both the analogies between basic physical principles and the applications of the principles in modern technology. The Unified Technical Concepts (UTC) system that was developed is (1) a reorganization of physics…

Syntactical and Punctuation Errors: An Analysis of Technical Writing of University Students Science College, Taif University, KSA

ERIC Educational Resources Information Center

Alamin, Abdulamir; Ahmed, Sawsan

2012-01-01

Analyzing errors committed by second language learners during their first year of study at the University of Taif, can offer insights and knowledge of the learners' difficulties in acquiring technical English communication. With reference to the errors analyzed, the researcher found that the learners' failure to understand basic English grammar…

Scientific and Technical Information and Transfer for Education (STITE). Research Report No. 1.

ERIC Educational Resources Information Center

Zunde, Pranas

STITE (Scientific and Technical Information Transfer for Education) is basically a system to interface between science information and the science learner. As such STITE acts as a link between STIC (Science and Technology Information Centers) and LIS (Learning Information Systems). After an introduction to the goals and objectives of the ongoing…

Psychiatry Ward Specialist, 10-12. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, is designed to train students to perform as assistants to professional personnel in the care and treatment of patients in mental health units. It includes basic concepts of human behavior, the aspects of atypical adjustive reactions, the…

Construction Mechanic Part I, 8-5. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, is the first of a two-course series that teaches students to maintain and repair automotive and construction equipment using either gasoline or diesel engines. It covers basic combustion engine principles and electrical system principles as well…

A Descriptive Study of the Classroom Instruction Component of the ESEA Title VII Bilingual Education Program. Technical Report.

ERIC Educational Resources Information Center

Cardenas, Rene F.; And Others

The technical report portion of a national survey of bilingual education programs funded under Title VII of the Elementary and Secondary Education Act is presented. The study, conducted during 1979-83, describes the characteristics of the programs' classroom instruction component. Basic project directors and parent advisory committee chairpersons…

Mathematics for the Technical Student: The Use of the Computer in the Systems Approach to Instruction.

ERIC Educational Resources Information Center

Capps, Joan P.

An instructional method using flow-chart symbols to make mathematical abstractions more concrete was implemented for a year in a technical mathematics course. Students received instruction in computer applications and programming in the BASIC language in order to increase motivation and firm the mathematical skills and problem-solving approaches…

Construction Mechanic Part II, 8-6. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, is the second of a two-course series that teaches students to maintain and repair automotive and construction equipment using either gasoline or diesel engines. It covers basic chassis and power train troubleshooting, diagnosis, and adjustment…

Marine Science Technician Second Class, 15-2. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, was designed to provide the theory portion of the Marine Science Technician Program. It includes a review of basic subjects, marine biology, oceanography, as well as meteorologic observations and recording. The course consists of a lesson book…

Das Sprachlabor in der Schule (The Language Laboratory in Schools).

ERIC Educational Resources Information Center

Cabus, Hans-Joachim; Freudenstein, Reinhold

This technical manual for the use of language laboratories includes information on the following topics: (1) types of laboratories, (2) the tape, (3) the tape recorder, (4) other basic technical equipment, (5) the audio-active laboratory, the audio-active-compare laboratory, and an evaluation of the two, (6) possibilities for expanded use, (7)…

easyCBM® Reading Criterion Related Validity Evidence: Grades K-1. Technical Report #1309

ERIC Educational Resources Information Center

Lai, Cheng-Fei; Alonzo, Julie; Tindal, Gerald

2013-01-01

In this technical report, we present the results of a study to gather criterion-related evidence for Grade K-1 easyCBM® reading measures. We used correlations to examine the relation between the easyCBM® measures and other published measures with known reliability and validity evidence, including the Dynamic Indicators of Basic Early Literacy…

Third Progress and Information Report of the Vocational-Technical Education Consortium of States.

ERIC Educational Resources Information Center

Lee, Connie W.; And Others

This description of major activities and accomplishments of the Vocational-Technical Education Consortium of the States (V-TECS) since the second progress report of May, 1975, is designed to provide the reader with a basic understanding of the processes and procedures used by the consortium in achieving its major goal: The production of catalogs…

Demand, Supply and Results for Secondary Career and Technical Education.

ERIC Educational Resources Information Center

Washington State Workforce Training and Education Coordinating Board, Olympia.

The benefits of offering high school students career and technical education (CTE) in addition to training in basic academic skills and the cost-effectiveness of CTE were examined by reviewing available data on demand, supply, and results for CTE. The analysis confirmed that the market and demand for workers with only a high school education still…

Carpentry I, 3-8A. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Army Engineer School, Fort Belvoir, VA.

This individualized, self-paced correspondence course in carpentry has been adapted from military curriculum materials for use in vocational and technical education programs. This first volume of a two-volume set is designed to present the theory portion of carpentry and basic skills. The Carpentry I course contains four lessons. Lesson l, Job…

Materials Testing and Quality Control Soils, 3-28. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This instructional package on material testing and quality control of soils has been adapted from military curriculum materials for use in technical and vocational education programs. This short course presents basic information on soils as well as exploration, field identification, and laboratory procedures that will enable students completing…

Technical Efficiency and Primary Education in South Africa: Evidence from Sub-National Level Analyses

ERIC Educational Resources Information Center

Boateng, Nana Adowaa

2014-01-01

The paper examines the extent to which sub-national public officials are efficient in delivering basic education services and argues that technical inefficiencies, especially in the management of public funds for education, could potentially contribute to poor education service delivery in South Africa. A conceptual framework is proposed to show…

Performance of Retrained Airmen in Air Force Technical Schools (Revised). Interim Report for Period January 1981-August 1982.

ERIC Educational Resources Information Center

Skinner, Mary J.; Alley, William E.

Research was conducted to determine the effect of changing occupational specialties on the performance of Air Force retrained enlistees attending basic technical schools. The academic performance and attrition rates of approximately 20,000 retrainees and 230,000 nonprior-service enlistees (nonretrainees) attending 272 schools were compared.…

The Data Warehouse: Keeping It Simple. MIT Shares Valuable Lessons Learned from a Successful Data Warehouse Implementation.

ERIC Educational Resources Information Center

Thorne, Scott

2000-01-01

Explains why the data warehouse is important to the Massachusetts Institute of Technology community, describing its basic functions and technical design points; sharing some non-technical aspects of the school's data warehouse implementation that have proved to be important; examining the importance of proper training in a successful warehouse…

The Basic Regularities of Education and Their Application in Higher Education Research and Practice: Brief Description of the Basic Regularities ("Guilu") of Education

ERIC Educational Resources Information Center

Maoyuan, Pan

2007-01-01

Research on the issues of higher education has been going on for a long time. However, higher education pedagogy as independent discipline has been present in China for only about ten years. The structure of a discipline cannot consist merely of a compilation of the issues under research but must also include its basic theories and a system of…

77 FR 39552 - Self-Regulatory Organizations; NASDAQ OMX BX, Inc.; Order Approving a Proposed Rule Change With...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

... Exchange or NASDAQ Execution Services To Cancel Orders When a Technical or Systems Issue Occurs and To... the authority of BX or NASDAQ Execution Services (``NES'') to cancel orders when a technical or... issue may occur at BX, NES, or a routing destination that causes BX or NES to cancel orders, if BX or...

[White House Conference on Aging, 1981. Research in Aging. Report and Executive Summary of the Technical Committee.

ERIC Educational Resources Information Center

Birren, James E.; And Others

This Technical Committee Report provides an overview and historical sketch of research in aging and proposes a need for new knowledge. An examination of key issues notes the difficulty in assigning priority to research topics, and identifies emerging issues of public concern including: (1) physical health (alcohol and drugs, falls and accidents,…

75 FR 35800 - Draft EPA's Reanalysis of Key Issues Related to Dioxin Toxicity and Response to NAS Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-23

... FR 28610). Written comments on the draft report were to be submitted to EPA by August 19, 2010 (a 90... review. The SAB will convene an expert panel composed of scientists knowledgeable about technical issues... for their consideration. Members of the public who wish to ensure that their technical comments are...

AgRISTARS documents tracking list report

NASA Technical Reports Server (NTRS)

Hawkins, J. L.

1982-01-01

A quarterly listing of those documents and related publications that have been issued and placed in the AgRISTARS tracking system is presented. The Tracking List Report provides a catalog, by project, of technical publications arranged by type of document and gives the reference AgRISTARS document numbers, title and date of publication, the issuing organization, and the National Technical Information Service reference number.

77 FR 28375 - Dixie Pipeline Company LLC; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

....1.0.\\1\\ The technical conference will address the issues raised by the protesters in the proceeding and the issues discussed by the Commission in P 19 of the April 27, 2012 order concerning the effect... conference on Wednesday, May 30, 2012, at 9:00 a.m. (EDT), in a room to be designated at the offices of the...

Solar energy/utility interface - The technical issues

NASA Astrophysics Data System (ADS)

Tabors, R. D.; White, D. C.

1982-01-01

The technical and economic factors affecting an interface between solar/wind power sources and utilities are examined. Photovoltaic, solar thermal, and wind powered systems are subject to stochastic local climatic variations and as such may require full back-up services from utilities, which are then in a position of having reserve generating power and power lines and equipment which are used only part time. The low reliability which has degraded some economies of scale formerly associated with large, centralized power plants, and the lowered rate of the increase in electricity usage is taken to commend the inclusion of power sources with a modular nature such as is available from solar derived electrical generation. Technical issues for maintaining the quality of grid power and also effectively metering purchased and supplied back-up power as part of a homeostatic system of energy control are discussed. It is concluded that economic considerations, rather than technical issues, bear the most difficulty in integrating solar technologies into the utility network.

Real Time Pricing as a Default or Optional Service for C&ICustomers: A Comparative Analysis of Eight Case Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barbose, Galen; Goldman, Charles; Bharvirkar, Ranjit

Demand response (DR) has been broadly recognized to be an integral component of well-functioning electricity markets, although currently underdeveloped in most regions. Among the various initiatives undertaken to remedy this deficiency, public utility commissions (PUC) and utilities have considered implementing dynamic pricing tariffs, such as real-time pricing (RTP), and other retail pricing mechanisms that communicate an incentive for electricity consumers to reduce their usage during periods of high generation supply costs or system reliability contingencies. Efforts to introduce DR into retail electricity markets confront a range of basic policy issues. First, a fundamental issue in any market context is howmore » to organize the process for developing and implementing DR mechanisms in a manner that facilitates productive participation by affected stakeholder groups. Second, in regions with retail choice, policymakers and stakeholders face the threshold question of whether it is appropriate for utilities to offer a range of dynamic pricing tariffs and DR programs, or just ''plain vanilla'' default service. Although positions on this issue may be based primarily on principle, two empirical questions may have some bearing--namely, what level of price response can be expected through the competitive retail market, and whether establishing RTP as the default service is likely to result in an appreciable level of DR? Third, if utilities are to have a direct role in developing DR, what types of retail pricing mechanisms are most appropriate and likely to have the desired policy impact (e.g., RTP, other dynamic pricing options, DR programs, or some combination)? Given a decision to develop utility RTP tariffs, three basic implementation issues require attention. First, should it be a default or optional tariff, and for which customer classes? Second, what types of tariff design is most appropriate, given prevailing policy objectives, wholesale market structure, ratemaking practices and standards, and customer preferences? Third, if a primary goal for RTP implementation is to induce DR, what types of supplemental activities are warranted to support customer participation and price response (e.g., interval metering deployment, customer education, and technical assistance)?« less

Health policy basics: health insurance marketplaces.

PubMed

Crowley, Ryan A; Tape, Thomas G

2013-12-03

Starting on 1 October 2013, most individuals and small businesses will be able to shop for and enroll in health insurance coverage through their state's health insurance marketplace, also known as an exchange. The health insurance marketplaces will serve as a one-stop resource to help the uninsured and the underinsured find comprehensive health coverage that fits their needs and budget and determine whether they qualify for health insurance tax credits provided by the Patient Protection and Affordable Care Act. Physicians may benefit because insured patients are more likely to have a regular source of care, adhere to medical regimens, and access preventive care. However, implementation of the marketplaces may prove challenging if enrollment numbers are insufficient, technical problems arise, and patients are unable to access providers. Despite these potential issues, physicians are encouraged to educate themselves about how the marketplaces work so they can direct their patients to find the coverage that best meets their medical needs.

Development of a remote vital signs sensor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ladd, M.D.; Pacheco, M.S.; Rivas, R.R.

1997-06-01

This paper describes the work at Sandia National Laboratories to develop sensors that remotely detect unique life-form characteristics, such as breathing patterns or heartbeat patterns. This paper will address the Technical Support Working Group`s (TSWG) objective: to develop a remote vital signs detector which can be used to assess someone`s malevolent intent. The basic concept of operations for the projects, system development issues, and the preliminary results for a radar device currently in-house and the implications for implementation are described. A survey that identified the in-house technology currently being evaluated is reviewed, as well as ideas for other potential technologiesmore » to explore. A radar unit for breathing and heartbeat detection is being tested, and the applicability of infrared technology is being explored. The desire for rapid prototyping is driving the need for off-the-shelf technology. As a conclusion, current status and future directions of the effort are reviewed.« less

HEPATOKIN1 is a biochemistry-based model of liver metabolism for applications in medicine and pharmacology.

PubMed

Berndt, Nikolaus; Bulik, Sascha; Wallach, Iwona; Wünsch, Tilo; König, Matthias; Stockmann, Martin; Meierhofer, David; Holzhütter, Hermann-Georg

2018-06-19

The epidemic increase of non-alcoholic fatty liver diseases (NAFLD) requires a deeper understanding of the regulatory circuits controlling the response of liver metabolism to nutritional challenges, medical drugs, and genetic enzyme variants. As in vivo studies of human liver metabolism are encumbered with serious ethical and technical issues, we developed a comprehensive biochemistry-based kinetic model of the central liver metabolism including the regulation of enzyme activities by their reactants, allosteric effectors, and hormone-dependent phosphorylation. The utility of the model for basic research and applications in medicine and pharmacology is illustrated by simulating diurnal variations of the metabolic state of the liver at various perturbations caused by nutritional challenges (alcohol), drugs (valproate), and inherited enzyme disorders (galactosemia). Using proteomics data to scale maximal enzyme activities, the model is used to highlight differences in the metabolic functions of normal hepatocytes and malignant liver cells (adenoma and hepatocellular carcinoma).

Hawking temperature: an elementary approach based on Newtonian mechanics and quantum theory

NASA Astrophysics Data System (ADS)

Pinochet, Jorge

2016-01-01

In 1974, the British physicist Stephen Hawking discovered that black holes have a characteristic temperature and are therefore capable of emitting radiation. Given the scientific importance of this discovery, there is a profuse literature on the subject. Nevertheless, the available literature ends up being either too simple, which does not convey the true physical significance of the issue, or too technical, which excludes an ample segment of the audience interested in science, such as physics teachers and their students. The present article seeks to remedy this shortcoming. It develops a simple and plausible argument that provides insight into the fundamental aspects of Hawking’s discovery, which leads to an approximate equation for the so-called Hawking temperature. The exposition is mainly intended for physics teachers and their students, and it only requires elementary algebra, as well as basic notions of Newtonian mechanics and quantum theory.

Biomineralization of calcium carbonates and their engineered applications: a review

PubMed Central

Dhami, Navdeep K.; Reddy, M. Sudhakara; Mukherjee, Abhijit

2013-01-01

Microbially induced calcium carbonate precipitation (MICCP) is a naturally occurring biological process in which microbes produce inorganic materials as part of their basic metabolic activities. This technology has been widely explored and promising with potential in various technical applications. In the present review, the detailed mechanism of production of calcium carbonate biominerals by ureolytic bacteria has been discussed along with role of bacteria and the sectors where these biominerals are being used. The applications of bacterially produced carbonate biominerals for improving the durability of buildings, remediation of environment (water and soil), sequestration of atmospheric CO2 filler material in rubbers and plastics etc. are discussed. The study also sheds light on benefits of bacterial biominerals over traditional agents and also the issues that lie in the path of successful commercialization of the technology of microbially induced calcium carbonate precipitation from lab to field scale. PMID:24194735

Short-rotation management of Eucalyptus: Guidelines for plantations in Hawaii. Forest Service general technical report (Final)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitesell, C.D.; DeBell, D.S.; Schubert, T.H.

1992-11-01

A 10-year research and development program was conducted on the island of Hawaii, where nearly 230,000 acres are suitable for growing biomass in short-rotation Eucalyptus plantations. Successful techniques are described for seedling production, plantation establishment (site preparation, weed control, planting), maintenance (weed control, fertilization), biomass yield estimation, and harvest. Basic biological relationships are described to aid decisions on site selection, initial spacing, fertilizer schedules, and rotation length. Environmental issues likely to be faced by growers of Eucalyptus plantations are discussed, including soil erosion, nutrient depletion, and monocultures. Continuing programs for tree improvement, monitoring, and silviculture research are recommeded. Production costsmore » for biomass yields are estimated for three promising management regimes, representing pure Eucalyptus plantings at dense and wide spacings and a mixed species plantation where Albizia is used as a nurse crop to provide nitrogen needed for optimum Eucalyptus growth.« less

Small low mass advanced PBR's for propulsion

NASA Astrophysics Data System (ADS)

Powell, J. R.; Todosow, M.; Ludewig, H.

1993-10-01

The advanced Particle Bed Reactor (PBR) to be described in this paper is characterized by relatively low power, and low cost, while still maintaining competition values for thrust/weight, specific impulse and operating times. In order to retain competitive values for the thrust/weight ratio while reducing the reactor size, it is necessary to change the basic reactor layout, by incorporating new concepts. The new reactor design concept is termed SIRIUS (Small Lightweight Reactor Integral Propulsion System). The following modifications are proposed for the reactor design to be discussed in this paper: Pre-heater (U-235 included in Moderator); Hy-C (Hydride/De-hydride for Reactor Control); Afterburner (U-235 impregnated into Hot Frit); and Hy-S (Hydride Spike Inside Hot Frit). Each of the modifications will be briefly discussed below, with benefits, technical issues, design approach, and risk levels addressed. The paper discusses conceptual assumptions, feasibility analysis, mass estimates, and information needs.

Radiation Risk From Medical Imaging

PubMed Central

Lin, Eugene C.

2010-01-01

This review provides a practical overview of the excess cancer risks related to radiation from medical imaging. Primary care physicians should have a basic understanding of these risks. Because of recent attention to this issue, patients are more likely to express concerns over radiation risk. In addition, physicians can play a role in reducing radiation risk to their patients by considering these risks when making imaging referrals. This review provides a brief overview of the evidence pertaining to low-level radiation and excess cancer risks and addresses the radiation doses and risks from common medical imaging studies. Specific subsets of patients may be at greater risk from radiation exposure, and radiation risk should be considered carefully in these patients. Recent technical innovations have contributed to lowering the radiation dose from computed tomography, and the referring physician should be aware of these innovations in making imaging referrals. PMID:21123642

1992

EPA Science Inventory

There are two classes of statistical issues: firm issues amenable to problem statement and technical resolution and soft issues that have qualitative dimensions and ideological implications. irm issues are easy: defining and stating the problem is much of the solution. he soft is...

Technical and Vocational Training.

ERIC Educational Resources Information Center

Vocational Training, 1993

1993-01-01

This issue focuses on the various forms that secondary technical and vocational education takes in different European Community Member States. "The Future for Skilled Workers" is an interview with Burkart Lutz, a German researcher. Other articles are as follows: "Contradictions in Technical and Vocational Education: The…

75 FR 33682 - Export Administration Regulations; Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-15

...-01] RIN 0694-AE93 Export Administration Regulations; Technical Amendments AGENCY: Bureau of Industry... Bureau of Industry and Security (BIS) makes a technical amendment to the Export Administration... review of final decisions and orders issued in BIS export control administrative enforcement proceedings...

77 FR 53886 - February 2011 Southwest Cold Weather Event Follow-up Technical Conference; Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

... Southwest Cold Weather Event Follow-up Technical Conference; Notice of Technical Conference Take notice that... August 16, 2011 Report on Outages and Curtailments During the Southwest Cold Weather Event of February 1... severe cold weather issues that led to rolling blackouts affecting over 4 million customers and natural...

The Basic Organizing/Optimizing Training Scheduler (BOOTS): User's Guide. Technical Report 151.

ERIC Educational Resources Information Center

Church, Richard L.; Keeler, F. Laurence

This report provides the step-by-step instructions required for using the Navy's Basic Organizing/Optimizing Training Scheduler (BOOTS) system. BOOTS is a computerized tool designed to aid in the creation of master training schedules for each Navy recruit training command. The system is defined in terms of three major functions: (1) data file…

On the Basis of the Basic Variety.

ERIC Educational Resources Information Center

Schwartz, Bonnie D.

1997-01-01

Considers the interplay between source and target language in relation to two points made by Klein and Perdue: (1) the argument that the analysis of the target language should not be used as the model for analyzing interlanguage data; and (2) the theoretical claim that under the technical assumptions of minimalism, the Basic Variety is a "perfect"…

The Philosopher's Stone: How Basic Skills Programs Fare in Troubled Financial Times

ERIC Educational Resources Information Center

Ray, Thomas P.

2012-01-01

This mixed methods study examined the relative position of basic skills programs with transfer and career technical programs in a large suburban community college in California during the three-year period of budget reductions from 2009-2010 through 2011-2012. The budget line dedicated to part-time or non-contract instruction was analyzed along…

ESAA Basic Summer School. Technical Report: 1979-80. Publication No. 80.19.

ERIC Educational Resources Information Center

Porterfield, Craig; Eglsaer, Richard

A total of 359 retained seventh and eighth grade students from the Austin (Texas) Independent School District's junior high schools participated in a summer enrichment program that was designed to improve their basic skills and decision making skills and to provide them with a successful school experience. Diagnostic information was used to assign…

Filing Alphabetically. Basic Rules. Student's Manual and Instructor's Manual.

ERIC Educational Resources Information Center

McLeod, Sadie

Supporting performance objectives 21, 25, and 26 of the V-TECS (Vocational-Technical Education Consortium of States) Secretarial Catalog, both a set of student materials and an instructor's manual on the basic rules of filing alphabetically are included in this packet. (The packet is the first in a set of nine on maintaining files and a…

Structured Hypermedia Application Development Model (SHADM): A structured Model for Technical Documentation Application Design

DTIC Science & Technology

1991-12-01

effective (19:15) Figure 2 details a flowchart of the basic steps in prototyping. The basic concept behind prototyping is to quickly produce a working...One approach to overcoming this is to structure the document relative to the experience level of the user (14:49). A "novice" or beginner would

An Inventory of U.S. Navy Courses Suitable for Use in Training Civiliam Personnel in Basic Technical Skills.

ERIC Educational Resources Information Center

Rogers, William A., Jr.; Nisos, Michael J.

An inventory of courses of study developed by the United States Navy which might be useful to other private and public institutions in training civilian students in basic technological skills is presented. Individual course reports contain the following information: course description, comments, course content (including blocks of instruction and…

Attention, Intention and the Structure of Discourse. Technical Report No. 380.

ERIC Educational Resources Information Center

Grosz, B. J.; Sidner, C. L.

Developing and integrating two lines of research, one focusing on discourse and the other on intention recognition in discourse, this paper presents the basic elements of a computational theory of discourse. The paper argues that by specifying the basic units a discourse comprises and the ways in which they can relate, an account of discourse…

A Basic Vocabulary and a Bibliography for Scientific and Technical English.

ERIC Educational Resources Information Center

Brunt, Richard J.

The selection of 594 words in this basic vocabulary list was compiled from various dictionaries and frequency lists for physics, mathematics and civil engineering. The list attempts to include those words which have been found to be unknown by German students learning English for science and technology. In addition to the word list, a bibliography…

Socio-technical Issues for Ubiquitous Information Society in 2010

NASA Astrophysics Data System (ADS)

Funabashi, Motohisa; Homma, Koichi; Sasaki, Toshiro; Sato, Yoshinori; Kido, Kunihiko; Fukumoto, Takashi; Yano, Koujin

Impact of the ubiquitous information technology on our society is so significant that directing technological development and preparing institutional apparatus are quite important and urgent. The present paper elaborates, with the efforts by both humanity and engineering disciplines, to find out the socio-technical issues of ubiquitous information society in 2010 by inspecting social implications of emerging technology as well as social expectations. In order to deliberate the issues, scenarios are developed that describes possible life in ubiquitous information society. The derived issues cover integrating information technology and human body, producing smart sharable environment, protecting individual rights, fostering new service business, and forming community.

Water Infrastructure Needs and Investment: Review and Analysis of Key Issues

DTIC Science & Technology

2008-11-24

the Rural Development Act of 1972, as amended (7 U.S.C. § 1926). The purpose of these USDA programs is to provide basic amenities, alleviate health...nonregulatory costs (e.g., routine replacement of basic infrastructure).12 Wastewater Needs. The most recent wastewater survey, conducted in 2004 and issued...1.6 billion just to implement the most basic steps needed to improve security (such as better controlling access to facilities with fences, locks

International Perspectives on Quality Assurance and New Techniques in Radiation Medicine: Outcomes of an IAEA Conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shortt, Ken; Davidsson, Lena; Hendry, Jolyon

2008-05-01

The International Atomic Energy Agency organized an international conference called, 'Quality Assurance and New Techniques in Radiation Medicine' (QANTRM). It dealt with quality assurance (QA) in all aspects of radiation medicine (diagnostic radiology, nuclear medicine, and radiotherapy) at the international level. Participants discussed QA issues pertaining to the implementation of new technologies and the need for education and staff training. The advantage of developing a comprehensive and harmonized approach to QA covering both the technical and the managerial issues was emphasized to ensure the optimization of benefits to patient safety and effectiveness. The necessary coupling between medical radiation imaging andmore » radiotherapy was stressed, particularly for advanced technologies. However, the need for a more systematic approach to the adoption of advanced technologies was underscored by a report on failures in intensity-modulated radiotherapy dosimetry auditing tests in the United States, which could imply inadequate implementation of QA for these new technologies. A plenary session addressed the socioeconomic impact of introducing advanced technologies in resource-limited settings. How shall the dual gaps, one in access to basic medical services and the other in access to high-quality modern technology, be addressed?.« less

High Current Density, Long Life Cathodes for High Power RF Sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ives, Robert Lawrence; Collins, George; Falce, Lou

2014-01-22

This program was tasked with improving the quality and expanding applications for Controlled Porosity Reservoir (CPR) cathodes. Calabazas Creek Research, Inc. (CCR) initially developed CPR cathodes on a DOE-funded SBIR program to improve cathodes for magnetron injection guns. Subsequent funding was received from the Defense Advanced Research Projects Agency. The program developed design requirements for implementation of the technology into high current density cathodes for high frequency applications. During Phase I of this program, CCR was awarded the prestigious 2011 R&D100 award for this technology. Subsequently, the technology was presented at numerous technical conferences. A patent was issued for themore » technology in 2009. These cathodes are now marketed by Semicon Associates, Inc. in Lexington, KY. They are the world’s largest producer of cathodes for vacuum electron devices. During this program, CCR teamed with Semicon Associates, Inc. and Ron Witherspoon, Inc. to improve the fabrication processes and expand applications for the cathodes. Specific fabrications issues included the quality of the wire winding that provides the basic structure and the sintering to bond the wires into a robust, cohesive structure. The program also developed improved techniques for integrating the resulting material into cathodes for electron guns.« less

International perspectives on quality assurance and new techniques in radiation medicine: outcomes of an IAEA conference.

PubMed

Shortt, Ken; Davidsson, Lena; Hendry, Jolyon; Dondi, Maurizio; Andreo, Pedro

2008-01-01

The International Atomic Energy Agency organized an international conference called, "Quality Assurance and New Techniques in Radiation Medicine" (QANTRM). It dealt with quality assurance (QA) in all aspects of radiation medicine (diagnostic radiology, nuclear medicine, and radiotherapy) at the international level. Participants discussed QA issues pertaining to the implementation of new technologies and the need for education and staff training. The advantage of developing a comprehensive and harmonized approach to QA covering both the technical and the managerial issues was emphasized to ensure the optimization of benefits to patient safety and effectiveness. The necessary coupling between medical radiation imaging and radiotherapy was stressed, particularly for advanced technologies. However, the need for a more systematic approach to the adoption of advanced technologies was underscored by a report on failures in intensity-modulated radiotherapy dosimetry auditing tests in the United States, which could imply inadequate implementation of QA for these new technologies. A plenary session addressed the socioeconomic impact of introducing advanced technologies in resource-limited settings. How shall the dual gaps, one in access to basic medical services and the other in access to high-quality modern technology, be addressed?

Technical Assistance to Brownfields Communities

EPA Pesticide Factsheets

This notice announces the availability of funds and solicits proposals from eligible entities (including eligible non-profit organizations) to provide technical assistance to communities on brownfields issues.

40 CFR 35.4190 - How does my group identify a qualified technical advisor?

Code of Federal Regulations, 2011 CFR

2011-07-01

... issues or public health issues as those issues relate to hazardous substance/toxic waste issues, as... public health issues must have received his or her public health or related training at accredited... hazardous or toxic waste problems, relocation, redevelopment or public health issues, and communicating...

Production of antiretroviral drugs in middle- and low-income countries.

PubMed

Pinheiro, Eloan dos Santos; Brüning, Karin; Macedo, M Fernanda; Siani, Antonio C

2014-01-01

This review outlines the main issues concerning the production of antiretroviral (ARV) drugs in middle- and low-income countries and the relevant political, legal and technical requirements for supporting such production. The requirements for efficient local production, including the manufacture of generic and branded products and public demand, have been considered from economic, market and socio-political perspectives. A steady and consistent government policy is crucial to success. Additional crucial factors in establishing local production are adequate infrastructure, qualified human resources in technical and managerial areas, and production-distribution logistics systems. The creation or strengthening of a national drug regulatory agency is a basic requirement. Production of ARVs relies on the structure of the international market for active pharmaceutical ingredients (APIs), which are highly monopolized for inclusion in branded or patented drugs, or are concentrated in a few Asian generic companies. Countries seeking to begin local production must develop strategies to overcome the various barriers. For instance, sub-Saharan African countries may benefit from developing multilateral health agreements with neighbouring countries. Such agreements are recommended and should be complemented by technology transfers, especially for the manufacture of APIs. Achieving a production level that is sustainable in the long term is crucial to maintaining patients' access to ARVs.

International Scientific Conference on "Radiation-Thermal Effects and Processes in Inorganic Materials"

NASA Astrophysics Data System (ADS)

2015-04-01

The International Scientific Conference on "Radiation-Thermal Effects and Processes in Inorganic Materials" is a traditional representative forum devoted to the discussion of fundamental problems of radiation physics and its technical applications. The first nine conferences were held four times in Tomsk, then in Ulan-Ude (Russia), Bishkek (Kyrgyzstan), Tashkent (Uzbekistan), Sharm El Sheikh (Egypt), and the island of Cyprus. The tenth conference was held in Tomsk, Russia. The program of the Conference covers a wide range of technical areas and modern aspects of radiation physics, its applications and related matters. Topics of interest include, but are not limited to: • Physical and chemical phenomena in inorganic materials in radiation, electrical and thermal fields; • Research methods and equipment modification states and properties of materials; • Technologies and equipment for their implementation; • The use of radiation-thermal processes in nanotechnology; • Adjacent to the main theme of the conference issues The conference was attended by leading scientists from countries near and far abroad who work in the field of radiation physics of solid state and of radiation material science. The School-Conference of Young Scientists was held during the conference. The event was held with the financial support of the Russian Foundation for Basic Research, projects No. 14-38-10210 and No. 14-02-20376.

PREFACE: International Scientific Conference on Radiation-Thermal Effects and Processes in Inorganic Materials 2015 (RTEP2015)

NASA Astrophysics Data System (ADS)

2016-02-01

The International Scientific Conference "Radiation-Thermal Effects and Processes in Inorganic Materials" is a traditional representative forum devoted to the discussion of fundamental problems of radiation physics and its technical applications. The first nine conferences were held fourfold in Tomsk, Ulan-Ude (Russia), Bishkek (Kyrgyzstan), Tashkent (Uzbekistan), Sharm El Sheikh (Egypt), the island of Cyprus. The XI conference was held in Tomsk, Russia. The program of the Conference covers a wide range of technical areas and modern aspects of radiation physics, its applications and related matters. Topics of interest include, but are not limited to: • Physical and chemical phenomena in inorganic materials in radiation, electrical and thermal fields; • Research methods and equipment modification states and properties of materials; • Technologies and equipment for their implementation; • The use of radiation-thermal processes in nanotechnology; • Adjacent to the main theme of the conference issues The conference was attended by leading scientists from countries near and far abroad who work in the field of radiation physics of solid state and of radiation material science. The School-Conference of Young Scientists was also held during the conference. The event was held with the financial support of the Russian Foundation for Basic Research, projects No. 15-02-20616.

Stock Market Index Data and indicators for Day Trading as a Binary Classification problem.

PubMed

Bruni, Renato

2017-02-01

Classification is the attribution of labels to records according to a criterion automatically learned from a training set of labeled records. This task is needed in a huge number of practical applications, and consequently it has been studied intensively and several classification algorithms are available today. In finance, a stock market index is a measurement of value of a section of the stock market. It is often used to describe the aggregate trend of a market. One basic financial issue would be forecasting this trend. Clearly, such a stochastic value is very difficult to predict. However, technical analysis is a security analysis methodology developed to forecast the direction of prices through the study of past market data. Day trading consists in buying and selling financial instruments within the same trading day. In this case, one interesting problem is the automatic individuation of favorable days for trading. We model this problem as a binary classification problem, and we provide datasets containing daily index values, the corresponding values of a selection of technical indicators, and the class label, which is 1 if the subsequent time period is favorable for day trading and 0 otherwise. These datasets can be used to test the behavior of different approaches in solving the day trading problem.

NATIONAL RESPONSE TEAM TECHNICAL ASSISTANCE ...

EPA Pesticide Factsheets

This document provides technical information on a wide range of activities to aid in response to intentional release of anthrax in urban environments. It includes initial actions when a potential release is discovered, health and safety issues for responders, sampling and analysis methods, decontamination technologies, decontamination waste disposal, and communication with public. This document provides technical information on a wide range of activities to aid in response to intentional release of anthrax in urban environments. It includes initial actions when a potential release is discovered, health and safety issues for responders, sampling and analysis methods, decontamination technologies, decontamination waste disposal, and communication with public.

Providing Services to Virtual Patrons.

ERIC Educational Resources Information Center

Hulshof, Robert

1999-01-01

Discusses the types of services libraries need to support patrons who access the library via the Internet or e-mail. Highlights include issues in technical support; establishing policies and procedures; tools for technical support, including hardware and software; impacts of technical support on staff; and future possibilities. (LRW)

Gas Migration Project: Risk Assessment Tool and Computational Analyses to Investigate Wellbore/Mine Interactions, Secretary's Potash Area, Southeastern New Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sobolik, Steven R.; Hadgu, Teklu; Rechard, Robert P.

The Bureau of Land Management (BLM), US Department of the Interior has asked Sandia National Laboratories (SNL) to perform scientific studies relevant to technical issues that arise in the development of co-located resources of potash and petroleum in southeastern New Mexico in the Secretary’s Potash Area. The BLM manages resource development, issues permits and interacts with the State of New Mexico in the process of developing regulations, in an environment where many issues are disputed by industry stakeholders. The present report is a deliverable of the study of the potential for gas migration from a wellbore to a mine openingmore » in the event of wellbore leakage, a risk scenario about which there is disagreement among stakeholders and little previous site specific analysis. One goal of this study was to develop a framework that required collaboratively developed inputs and analytical approaches in order to encourage stakeholder participation and to employ ranges of data values and scenarios. SNL presents here a description of a basic risk assessment (RA) framework that will fulfill the initial steps of meeting that goal. SNL used the gas migration problem to set up example conceptual models, parameter sets and computer models and as a foundation for future development of RA to support BLM resource development.« less

The AskIT Service Desk: A Model for Improving Productivity and Reducing Costs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ashcraft, Phillip Lynn; Fogle, Blythe G.; Cummings, Susan M.

This was prepared for the business process improvement presentation to the Department of Energy. Los Alamos National Laboratory provides a single point of contact, the AskIT Service Desk, to address issues that impact customer productivity. At the most basic level, what customers want is for their calls to be received, to get a response from a knowledgeable analyst, and to have their issues resolved and their requests fulfilled. Providing a centralized, single point of contact service desk makes initiating technical or business support simple for the customer and improves the odds of immediately resolving the issue or correctly escalating themore » request to the next support level when necessary. Fulfilling customer requests through automated workflow also improves customer productivity and reduces costs. Finally, customers should be provided the option to solve their own problems through easy access to self-help resources such as frequently asked questions (FAQs) and how-to guides. To accomplish this, everyone who provides and supports services must understand how these processes and functions work together. Service providers and those who support services must “speak the same language” and share common objectives. The Associate Directorate for Business Innovation (ADBI) began the journey to improve services by selecting a known service delivery framework (Information Technology Infrastructure Library, or ITIL). From this framework, components that contribute significant business value were selected.« less

ACE: A distributed system to manage large data archives

NASA Technical Reports Server (NTRS)

Daily, Mike I.; Allen, Frank W.

1993-01-01

Competitive pressures in the oil and gas industry are requiring a much tighter integration of technical data into E and P business processes. The development of new systems to accommodate this business need must comprehend the significant numbers of large, complex data objects which the industry generates. The life cycle of the data objects is a four phase progression from data acquisition, to data processing, through data interpretation, and ending finally with data archival. In order to implement a cost effect system which provides an efficient conversion from data to information and allows effective use of this information, an organization must consider the technical data management requirements in all four phases. A set of technical issues which may differ in each phase must be addressed to insure an overall successful development strategy. The technical issues include standardized data formats and media for data acquisition, data management during processing, plus networks, applications software, and GUI's for interpretation of the processed data. Mass storage hardware and software is required to provide cost effective storage and retrieval during the latter three stages as well as long term archival. Mobil Oil Corporation's Exploration and Producing Technical Center (MEPTEC) has addressed the technical and cost issues of designing, building, and implementing an Advanced Computing Environment (ACE) to support the petroleum E and P function, which is critical to the corporation's continued success. Mobile views ACE as a cost effective solution which can give Mobile a competitive edge as well as a viable technical solution.

Application of Theory to a Technical Assistance Experiment: Development Communication Theory and the Basic Village Education Project in Guatemala.

ERIC Educational Resources Information Center

Kelly, James D.

This paper attempts to assess the influence of development communication theory on the planning and implementation of technical assistance projects in the Third World that utilize mass communication as an agent of change. Like political development theory, communication theory has often been applied in an ethnocentric manner in less developed…

A Study to Determine the Basic Science and Mathematics Topics Most Needed by Engineering Technology Graduates of Wake Technical Institute in Performing Job Duties.

ERIC Educational Resources Information Center

Edwards, Timothy I.; Roberson, Clarence E., Jr.

A survey of 470 graduates of the six engineering technology programs at Wake Technical Institute--Architectural, Chemical, Civil Engineering, Computer, Electronic Engineering, and Industrial Engineering Technologies--and 227 of their employers was conducted in October, 1979, to determine the science and mathematics topics most needed by…

Multi-Cultural Competency-Based Vocational Curricula. Maintenance Mechanics. Multi-Cultural Competency-Based Vocational/Technical Curricula Series.

ERIC Educational Resources Information Center

Hepburn, Larry; Shin, Masako

This document, one of eight in a multi-cultural competency-based vocational/technical curricula series, is on maintenance mechanics. This program is designed to run 40 weeks and cover 5 instructional areas: basic electricity (14 weeks); maintenance and repair of heating (4 weeks); maintenance and repair of air conditioning (12 weeks); maintenance…

Fieldcrest Cannon, Inc. Advanced Technical Preparation. Statistical Process Control (SPC). PRE-SPC 11: SPC & Graphs. Instructor Book.

ERIC Educational Resources Information Center

Averitt, Sallie D.

This instructor guide, which was developed for use in a manufacturing firm's advanced technical preparation program, contains the materials required to present a learning module that is designed to prepare trainees for the program's statistical process control module by improving their basic math skills in working with line graphs and teaching…

1969 Proceedings of the Technical Information Advisory Committee...

ERIC Educational Resources Information Center

National Security Industrial Association, Washington, DC.

The meetings were set up to find ways to overcome the barriers that regulate or reduce the flow of scientific/Technical information and data to the user. Giving the user what he needs, when he needs it, and at a cost he can afford is the basic challenge faced by information services. Obtaining information depends on: (1) personal habits; (2)…

All-Union Conference on Information Retrieval Systems and Automatic Processing of Scientific and Technical Information, 3rd, Moscow, 1967, Transactions. (Selected Articles).

ERIC Educational Resources Information Center

Air Force Systems Command, Wright-Patterson AFB, OH. Foreign Technology Div.

The role and place of the machine in scientific and technical information is explored including: basic trends in the development of information retrieval systems; preparation of engineering and scientific cadres with respect to mechanization and automation of information works; the logic of descriptor retrieval systems; the 'SETKA-3' automated…

Basic Concepts and Definitions for Privacy and Confidentiality in Student Education Records. SLDS Technical Brief 1. NCES 2011-601

ERIC Educational Resources Information Center

National Center for Education Statistics, 2010

2010-01-01

The National Center for Education Statistics (NCES) is launching a new series of Technical Briefs on various aspects of the protection of personally identifiable information in students' education records. While driven by recent events, the principles and practices that are outlined in this series can be applied more generally to personally…

Making Basic Composition Relevant.

ERIC Educational Resources Information Center

Tichenor, Stuart

The technical writing teacher discovers two things about his/her students: they do not like to write and they do not like to read. They are not in the class because they are motivated, but because they must be there as part of a technical or vocational degree. One of the most common complaints about the class is, "I don't need to know how to…

Key issues and technical route of cyber physical distribution system

NASA Astrophysics Data System (ADS)

Zheng, P. X.; Chen, B.; Zheng, L. J.; Zhang, G. L.; Fan, Y. L.; Pei, T.

2017-01-01

Relying on the National High Technology Research and Development Program, this paper introduced the key issues in Cyber Physical Distribution System (CPDS), mainly includes: composite modelling method and interaction mechanism, system planning method, security defence technology, distributed control theory. Then on this basis, the corresponding technical route is proposed, and a more detailed research framework along with main schemes to be adopted is also presented.

Genome editing in pluripotent stem cells: research and therapeutic applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deleidi, Michela, E-mail: michela.deleidi@dzne.de; Hertie Institute for Clinical Brain Research, University of Tübingen; Yu, Cong

Recent progress in human pluripotent stem cell (hPSC) and genome editing technologies has opened up new avenues for the investigation of human biology in health and disease as well as the development of therapeutic applications. Gene editing approaches with programmable nucleases have been successfully established in hPSCs and applied to study gene function, develop novel animal models and perform genetic and chemical screens. Several studies now show the successful editing of disease-linked alleles in somatic and patient-derived induced pluripotent stem cells (iPSCs) as well as in animal models. Importantly, initial clinical trials have shown the safety of programmable nucleases formore » ex vivo somatic gene therapy. In this context, the unlimited proliferation potential and the pluripotent properties of iPSCs may offer advantages for gene targeting approaches. However, many technical and safety issues still need to be addressed before genome-edited iPSCs are translated into the clinical setting. Here, we provide an overview of the available genome editing systems and discuss opportunities and perspectives for their application in basic research and clinical practice, with a particular focus on hPSC based research and gene therapy approaches. Finally, we discuss recent research on human germline genome editing and its social and ethical implications. - Highlights: • Programmable nucleases have proven efficient and specific for genome editing in human pluripotent stem cells (hPSCs). • Genome edited hPSCs can be employed to study gene function in health and disease as well as drug and chemical screens. • Genome edited hPSCs hold great promise for ex vivo gene therapy approaches. • Technical and safety issues should be first addressed to advance the clinical use of gene-edited hPSCs.« less

Publications on maglev technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

He, J.L.; Coffey, H.T.; Rote, D.M.

1991-12-01

Magnetically levitated passenger-transportation vehicles, using attractive and repulsive magnetic forces, are currently in the development or prototype-revenue stages in Japan and Germany. The basic principles of these technologies have been understood for several decades, but their practical applications awaited advances in high-power electronic devices, modern controls, superconducting magnets, and improvements in our transportation infrastructures. A considerable amount of work was devoted to magnetic-levitation (maglev) transportation system in the late 1960s and the 1970s. Detailed development was sustained primarily in Germany and Japan. This listing of publications was begun as the initial phase of a design study for a maglev developmentmore » facility sponsored by the State of Illinois. The listing has been continually updated under programs sponsored by the Federal Railroad Administration and the US Army Corps of Engineers. In 1991, the National Maglev Initiative issued 27 contracts for the study of technical issues related to maglev and four contracts for the definition of maglev systems. In December 1991, the Intermodal Surface Transportation Efficiency Act was enacted, mandating the development of a US-designed maglev system in a six-year period. This listing is offered as an aid to those working on these projects, to help them locate technical papers on relevant technologies. The design and installation of a maglev transportation system will require the efforts of workers in many disciplines, from electronics to economics to safety. Accordingly, the references have been grouped in 14 different sections to expedite review of the listing. In many case, the references are annotated to indicate the general content of the papers. Abstracts are not available. A list of information services from which the listed documents might be obtained and an author index are provided.« less

Fitness for duty in the nuclear industry: Update of the technical issues 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

Durbin, N.; Grant, T.

The purpose of this report is to provide an update of information on the technical issues surrounding the creation, implementation, and maintenance of fitness-for-duty (FFD) policies and programs. It has been prepared as a resource for Nuclear Regulatory Commission (NRC) and nuclear power plant personnel who deal with FFD programs. It contains a general overview and update on the technical issues that the NRC considered prior to the publication of its original FFD rule and the revisions to that rule (presented in earlier NUREG/CRs). It also includes chapters that address issues about which there is growing concern and/or about whichmore » there have been substantial changes since NUREG/CR-5784 was published. Although this report is intended to support the NRC`s rule making on fitness for duty, the conclusions of the authors of this report are their own and do not necessarily represent the opinions of the NRC.« less

75 FR 35021 - Reliability Standards Development and NERC and Regional Entity Enforcement; Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... Standards Development and NERC and Regional Entity Enforcement; Notice of Technical Conference June 15, 2010... Technical Conference to address industry perspectives on certain issues pertaining to the development and... Electric Reliability Organization's (ERO) standards development process; communication and interactions...

26 CFR 301.6110-2 - Meaning of terms.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... A “technical advice memorandum” is a written statement issued by the National Office to, and adopted... Internal Revenue Service in a written determination, including, with respect to a technical advice... technical advice memorandum, a “person to whom a written determination pertains” is the taxpayer whose...

Overlapping topics in advisory reports issued by five well-established European National Immunization Technical Advisory Groups from 2011 to 2014.

PubMed

Nijsten, Daniëlle; Houweling, Hans; Durupt, Antoine; Adjagba, Alex

2016-12-07

National Immunization Technical Advisory Groups (NITAGs) are facing increasingly complex vaccination issues together with a lack of human resources for evidence assessment and data analysis. One way to reduce these burdens could be to share some of the preparatory work across NITAGs. We conducted an inventory of all the advisory reports issued by five well-established European NITAGs from 2011 to 2014 to assess overlaps in issues and activities. A total of 104 advisory reports were retrieved. Advisory reports on the same issues were compared to identify overlapping activities and processes. Advisory reports issued by the five NITAGs showed little overlap in issues and processes. A first step towards efficient collaboration would be to establish an independent platform to provide insight into each NITAG's work and to facilitate the exchange of agendas, assessment frameworks and evidence. Copyright © 2016 Elsevier Ltd. All rights reserved.

Technical aspects of dental CBCT: state of the art

PubMed Central

Araki, K; Siewerdsen, J H; Thongvigitmanee, S S

2015-01-01

As CBCT is widely used in dental and maxillofacial imaging, it is important for users as well as referring practitioners to understand the basic concepts of this imaging modality. This review covers the technical aspects of each part of the CBCT imaging chain. First, an overview is given of the hardware of a CBCT device. The principles of cone beam image acquisition and image reconstruction are described. Optimization of imaging protocols in CBCT is briefly discussed. Finally, basic and advanced visualization methods are illustrated. Certain topics in these review are applicable to all types of radiographic imaging (e.g. the principle and properties of an X-ray tube), others are specific for dental CBCT imaging (e.g. advanced visualization techniques). PMID:25263643

Linkage: A Manitoba Survey of Basic Skills Awareness in the Workplace.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg. Literacy and Continuing Education Branch.

Manitoba, Canada, workplace stakeholder groups were interviewed to determine the issues they faced and their awareness of, and ability to deal with, workplace basic skills issues. Interviews collected the opinions of 78 employer representatives, 121 employees, and 5 union representatives in the 6 emerging economic sectors of health care products,…

Trends in Basic Mathematical Competencies of Beginning Undergraduates in Ireland, 2003-2013

ERIC Educational Resources Information Center

Treacy, Páraic; Faulkner, Fiona

2015-01-01

Deficiencies in beginning undergraduate students' basic mathematical skills has been an issue of concern in higher education, particularly in the past 15 years. This issue has been tracked and analysed in a number of universities in Ireland and internationally through student scores recorded in mathematics diagnostic tests. Students beginning…

Energy and Economics. [Revised Edition.

ERIC Educational Resources Information Center

Walstad, William; Gleason, Joyce

This unit is designed to provide high school students with an introduction to topics of energy and economics. A basic premise of the unit is that energy issues and economics are interrelated. It is believed that the application of basic economic concepts to energy issues can provide students with the tools to improve their analysis of problems and…

40 CFR 166.43 - Notice to EPA and registrants or basic manufacturers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Crisis Exemptions § 166.43 Notice to EPA and registrants or basic manufacturers. (a) Timing of notice. (1) The State or Federal Agency issuing the crisis exemption must notify the Administrator in advance of utilization of the crisis provisions. (2) The State or Federal agency issuing the crisis exemption shall...

Quality Assurance Program for Molecular Medicine Laboratories

PubMed Central

Hajia, M; Safadel, N; Samiee, S Mirab; Dahim, P; Anjarani, S; Nafisi, N; Sohrabi, A; Rafiee, M; Sabzavi, F; Entekhabi, B

2013-01-01

Background: Molecular diagnostic methods have played and continuing to have a critical role in clinical laboratories in recent years. Therefore, standardization is an evolutionary process that needs to be upgrade with increasing scientific knowledge, improvement of the instruments and techniques. The aim of this study was to design a quality assurance program in order to have similar conditions for all medical laboratories engaging with molecular tests. Methods: We had to design a plan for all four elements; required space conditions, equipments, training, and basic guidelines. Necessary guidelines was prepared and confirmed by the launched specific committee at the Health Reference Laboratory. Results: Several workshops were also held for medical laboratories directors and staffs, quality control manager of molecular companies, directors and nominees from universities. Accreditation of equipments and molecular material was followed parallel with rest of program. Now we are going to accredit medical laboratories and to evaluate the success of the program. Conclusion: Accreditation of medical laboratory will be succeeding if its basic elements are provided in advance. Professional practice guidelines, holding training and performing accreditation the molecular materials and equipments ensured us that laboratories are aware of best practices, proper interpretation, limitations of techniques, and technical issues. Now, active external auditing can improve the applied laboratory conditions toward the defined standard level. PMID:23865028

Quality assurance program for molecular medicine laboratories.

PubMed

Hajia, M; Safadel, N; Samiee, S Mirab; Dahim, P; Anjarani, S; Nafisi, N; Sohrabi, A; Rafiee, M; Sabzavi, F; Entekhabi, B

2013-01-01

Molecular diagnostic methods have played and continuing to have a critical role in clinical laboratories in recent years. Therefore, standardization is an evolutionary process that needs to be upgrade with increasing scientific knowledge, improvement of the instruments and techniques. The aim of this study was to design a quality assurance program in order to have similar conditions for all medical laboratories engaging with molecular tests. We had to design a plan for all four elements; required space conditions, equipments, training, and basic guidelines. Necessary guidelines was prepared and confirmed by the launched specific committee at the Health Reference Laboratory. Several workshops were also held for medical laboratories directors and staffs, quality control manager of molecular companies, directors and nominees from universities. Accreditation of equipments and molecular material was followed parallel with rest of program. Now we are going to accredit medical laboratories and to evaluate the success of the program. Accreditation of medical laboratory will be succeeding if its basic elements are provided in advance. Professional practice guidelines, holding training and performing accreditation the molecular materials and equipments ensured us that laboratories are aware of best practices, proper interpretation, limitations of techniques, and technical issues. Now, active external auditing can improve the applied laboratory conditions toward the defined standard level.

32 CFR 202.13 - Technical assistance for public participation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... TRC may request technical assistance for interpreting scientific and engineering issues with regard to the nature of environmental hazards at the installation and environmental restoration activities...

Technical Assistance To Tribal Communities Addressing Brownfields

EPA Pesticide Factsheets

This notice announces the availability of funds and solicits proposals from eligible entities (including eligible nonprofit organizations) to provide technical assistance to tribal communities on brownfield related issues.

Basic Skills Resource Center. Part 2

DTIC Science & Technology

1985-05-01

side if neceseary and Identify by block number) Basic Skills Education Curriculum Development Learning Strategies Reading Comprehension Motivational ... Motivational Skills Training for Military Technical Training Students ...... Barbara L. McCombs 25 Problem 27 Purpose 27 Approach 28 - Phase 1 28 - Phase...and Learning ...... John J. Hedl , Jr. 53 Purpose of Project 55 Description of Work 55 V Products 56 Virtual Videodisc Software Requirements ...... J.D

Investigation of a Chaotic Double Pendulum in the Basic Level Physics Teaching Laboratory

ERIC Educational Resources Information Center

Vanko, Peter

2007-01-01

First-year physics students at the Technical University of Budapest carry out a wide range of measurements in the Basic Level Physics Teaching Laboratory. One of the most exciting experiments is the investigation of a chaotic double pendulum by a V-scope, a powerful three-dimensional motion tracking system. After a brief introduction to the…

Basic Education for Adults: Pathways to College and Careers for Washington's Emerging Workforce. Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2015

2015-01-01

This brief describes the Basic Education for Adults (BEdA) programs that bridge the gap between school and work, thereby creating pathways to college and careers for Washington's emerging workforce. BEdA programs teach foundational skills--reading, writing, math, technology and English language--so adults can move through college and into…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 23: Multivibrators. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on multivibrators is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Three lessons are included in the…

International Conference on Harmonisation; guidance on the M4 Common Technical Document--Quality: Questions and Answers/Location Issues; availability. Notice.

PubMed

2004-06-09

The Food and Drug Administration (FDA) is announcing the availability of a guidance entitled "M4: The CTD--Quality: Questions and Answers/Location Issues." The guidance was prepared under the auspices of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH). This guidance provides further clarification for preparing the quality components of an application file in the common technical document (CTD) format. The guidance addresses the relationship between linked sections for certain parameters (such as polymorphism and particle size), and it addresses location issues (by indicating the section in which to place requested information). The guidance is intended to ease the preparation of paper and electronic submissions, facilitate regulatory reviews, and simplify the exchange of regulatory information among regulatory authorities.

National GAP Conference 2007-Discussion Groups Report

USGS Publications Warehouse

Ratz, Joan M.; Lamb, Berton Lee

2010-01-01

We led two discussion groups during the 2007 National GAP Conference. These discussion groups provided information to help develop a survey of National Gap Analysis Program (GAP) data users. One group discussed technical issues, and the second group discussed the use of GAP data for decisionmaking. Themes emerging from the technical issues group included concerns about data quality, need for information on how to use data, and passive data distribution. The decisionmaking discussion included a wide range of topics including the need to understand presentation of information, the need to connect with and understand users of data, the revision of GAP's mission, and the adaptability of products and data. The decisionmaking group also raised concerns regarding technical issues. One conclusion is that a deep commitment to ongoing information transfer and support is a key component of success for the GAP program.

The role of universities in energy and environmental R & D: An extended outline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drucker, H.

1995-12-31

Issues related to university research and development roles in energy and environmental areas are very briefly outlined in the paper. Fundamental issues discussed include basic versus applied science, and applied science versus technology development. Some specific issues appropriate for university research are identified, such as desulfurizing coal and managing mixed wastes in groundwater. The Plant Biotechnology consortium is described as a model that builds on university strengths in basic and applied technology.

Clarkesville Green Infrastructure Implementation Strategy

EPA Pesticide Factsheets

The report outlines the 2012 technical assistance for Clarkesville, GA to develop a Green Infrastructure Implementation Strategy, which provides the basic building blocks for a green infrastructure plan:

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

75 FR 39244 - Reliability Standards Development and NERC and Regional Entity Enforcement; Further Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-08

... Standards Development and NERC and Regional Entity Enforcement; Further Notice Concerning Technical... convene a Commissioner-led technical conference regarding issues pertaining to the development of... Corporation and the Regional Entities as previously announced.\\1\\ \\1\\ Notice of Technical Conference, 75 FR 35...

Impact of Automation on Technical Services.

ERIC Educational Resources Information Center

Rooks, Dana C.; Thompson, Linda L.

1988-01-01

Discusses the impact of automation on library technical services, and the need for library managers to be aware of the issues involved and to plan for future developments. The discussion focuses on the areas of job related concerns of technical staff, organizational structures, recruitment and training, and ergonomic considerations. (CLB)

78 FR 72673 - Midcontinent Independent System Operator, Inc.; Supplemental Notice Concerning Post-Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER13-2124-000] Midcontinent Independent System Operator, Inc.; Supplemental Notice Concerning Post-Technical Conference Comments As announced in the Notice of Technical Conference issued on October 25, 2013, and as required in the...

A Decision Support Tool to Evaluate Sources and Sinks of Nitrogen within a Watershed Framework

EPA Science Inventory

Human transformation of the nitrogen (N) cycle is causing a number of environmental and human health problems. Federal, state and local authorities focusing on management of N loadings face both technical and non-technical challenges. One technical issue is that we need a bette...

Trends in Career and Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Asunda, Paul; Kim, Soo Jung

2008-01-01

The purpose of this literature review was to identify current trends and issues in research focusing on career and technical education (CTE). The primary sources of literature for this review included all research articles published in three refereed scholarly journals--"Career and Technical Education Research," "Journal of Career and Technical…

Effects of Human Factors in Engineering and Design for Teaching Mathematics: A Comparison Study of Online and Face-to-Face at a Technical College

ERIC Educational Resources Information Center

Mativo, John M.; Hill, Roger B.; Godfrey, Paul W.

2013-01-01

The focus of this study was to examine four characteristics for successful and unsuccessful students enrolled in basic mathematics courses at a technical college. The characteristics, considered to be in part effects of human factors in engineering and design, examined the preferred learning styles, computer information systems competency,…

A Fast Solution of the Lindley Equations for the M-Group Regression Problem. Technical Report 78-3, October 1977 through May 1978.

ERIC Educational Resources Information Center

Molenaar, Ivo W.

The technical problems involved in obtaining Bayesian model estimates for the regression parameters in m similar groups are studied. The available computer programs, BPREP (BASIC), and BAYREG, both written in FORTRAN, require an amount of computer processing that does not encourage regular use. These programs are analyzed so that the performance…

Time Value of Money and Its Applications in Corporate Finance: A Technical Note on Linking Relationships between Formulas

ERIC Educational Resources Information Center

Chen, Jeng-Hong

2009-01-01

Time Value of Money (TVM) is the most important chapter in the basic corporate finance course. It is imperative to understand TVM formulas because they imply important TVM concepts. Students who really understand TVM concepts and formulas can learn better in chapters of TVM applications. This technical note intends to present more complete TVM…

Passing the Torch by Passing on a Skill: Passing the Torch to the Next Generation is the Intrinsic Reward for Dedicated Technology Teachers

ERIC Educational Resources Information Center

Millson, David; Jerie, Branko

2005-01-01

Motivating students to master the basics in any field is a demanding task. In technical education, while the direct benefit--almost certain, well-paying employment--is obvious, the challenge is to keep students' interest high. Absent that, the technical workforce lacks skilled replenishment, and the possibility of being overtaken by competition…

Technical and Vocational Education in Asia and Oceania. Bulletin of the Unesco Regional Office for Education in Asia and Oceania. Number 21, June 1980.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and Oceania.

This issue contains a regional review, discussion of technical and vocational education in countries of Asia and Oceania, articles dealing with various aspects of technical and vocational education, and a bibliographical supplement. The brief statistical review in section 1 concerns second-level technical and vocational education in the developing…

Ethical aspects of future health care: globalisation of markets and differentiation of societies - ethical challenges.

PubMed

Kluge, Eike-Henner W

2008-01-01

The shift in health care to an aggregate corporate and distributed model dominated by electronic methods of diagnosis, record-keeping and communication spanning jurisdictional boundaries raises technical, social and paradigmatic issues. The technical issues concern the material natures of the tools, devices, procedures and protocols; the social issues gravitate around abstract matters like individual rights and models of responsibility within a corporate setting and accountability in inter-jurisdictional contexts; the paradigmatic issues centre in the question of how the rights and duties of traditional and direct health care translate into the mediated context of the globally expanded corporate model of eHealth and telemedicine. The present discussion presents a brief overview of the issues and sketches some of their implications for the evolution of contemporary health care.

Federal Guidance for Radiation Protection

EPA Pesticide Factsheets

EPA produces federal guidance technical reports, which standardize dose and risk assessment and issues radiation protection guidance to federal agencies. This page provides links to federal guidance policy recommendations and technical reports.

77 FR 12799 - Census Scientific Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-02

...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... and technical expertise, as appropriate, to address Census Bureau program needs and objectives. The...

75 FR 16078 - Census Scientific Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-31

...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... and technical expertise, as appropriate, to address Census Bureau program needs and objectives. The...

76 FR 54197 - Census Scientific Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-31

...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... scientific and technical expertise, as appropriate, to address Census Bureau program needs and objectives...

Design Issues for Producing Effective Multimedia Presentations.

ERIC Educational Resources Information Center

Mason, Lisa D.

1997-01-01

Discusses design issues for interactive multimedia. Notes that technical communication instructors must consider navigational aids, the degree of control a user should have, audio cues, color and typographical elements, visual elements, and copyright issues. (RS)

An acceptable role for computers in the aircraft design process

NASA Technical Reports Server (NTRS)

Gregory, T. J.; Roberts, L.

1980-01-01

Some of the reasons why the computerization trend is not wholly accepted are explored for two typical cases: computer use in the technical specialties and computer use in aircraft synthesis. The factors that limit acceptance are traced in part, to the large resources needed to understand the details of computer programs, the inability to include measured data as input to many of the theoretical programs, and the presentation of final results without supporting intermediate answers. Other factors are due solely to technical issues such as limited detail in aircraft synthesis and major simplifying assumptions in the technical specialties. These factors and others can be influenced by the technical specialist and aircraft designer. Some of these factors may become less significant as the computerization process evolves, but some issues, such as understanding large integrated systems, may remain issues in the future. Suggestions for improved acceptance include publishing computer programs so that they may be reviewed, edited, and read. Other mechanisms include extensive modularization of programs and ways to include measured information as part of the input to theoretical approaches.

Back-to-the-Basics in English Teaching.

ERIC Educational Resources Information Center

Donelson, Ken, Ed.

1976-01-01

In this issue, the writers focus on the "basics" in English teaching, some offering suggestions on ways of altering present conditions, some commenting generally (in assessments, defenses, or attacks) cn the basics, and some presenting specific discussions of basics in teaching the various language arts components. A few of the articales and…

Focus on Basics: Connecting Research & Practice. Volume 7, Issue D

ERIC Educational Resources Information Center

Garner, Barbara, Ed.

2005-01-01

"Focus on Basics" is the quarterly publication of the National Center for the Study of Adult Learning and Literacy. It presents best practices, current research on adult learning and literacy, and how research is used by adult basic education teachers, counselors, program administrators, and policymakers. "Focus on Basics" is…

32 CFR 761.7 - Basic controls.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 5 2013-07-01 2013-07-01 false Basic controls. 761.7 Section 761.7 National... OF THE PACIFIC ISLANDS Criteria and Basic Controls § 761.7 Basic controls. (a) General. Except for such persons, ship, or aircraft as are issued an authorization to enter by an Entry Control Commander...

32 CFR 761.7 - Basic controls.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 5 2011-07-01 2011-07-01 false Basic controls. 761.7 Section 761.7 National... OF THE PACIFIC ISLANDS Criteria and Basic Controls § 761.7 Basic controls. (a) General. Except for such persons, ship, or aircraft as are issued an authorization to enter by an Entry Control Commander...

32 CFR 761.7 - Basic controls.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Basic controls. 761.7 Section 761.7 National... OF THE PACIFIC ISLANDS Criteria and Basic Controls § 761.7 Basic controls. (a) General. Except for such persons, ship, or aircraft as are issued an authorization to enter by an Entry Control Commander...

Focus on Basics: Connecting Research & Practice. Volume 8, Issue B

ERIC Educational Resources Information Center

Garner, Barbara, Ed.

2006-01-01

"Focus on Basics" is the quarterly publication of the National Center for the Study of Adult Learning and Literacy. It presents best practices, current research on adult learning and literacy, and how research is used by adult basic education teachers, counselors, program administrators, and policymakers. "Focus on Basics" is…

Focus on Basics: Connecting Research & Practice. Volume 6, Issue A

ERIC Educational Resources Information Center

Garner, Barbara, Ed.

2002-01-01

"Focus on Basics" is the quarterly publication of the National Center for the Study of Adult Learning and Literacy. It presents best practices, current research on adult learning and literacy, and how research is used by adult basic education teachers, counselors, program administrators, and policymakers. "Focus on Basics" is…

Focus on Basics: Connecting Research & Practice. Volume 9, Issue B

ERIC Educational Resources Information Center

Garner, Barbara, Ed.

2008-01-01

"Focus on Basics" is a publication of the U.S. Division of World Education, Inc. It presents best practices, current research on adult learning and literacy, and how research is used by adult basic education teachers, counselors, program administrators, and policymakers. "Focus on Basics" is dedicated to connecting research…

Information Systems, Security, and Privacy.

ERIC Educational Resources Information Center

Ware, Willis H.

1984-01-01

Computer security and computer privacy issues are discussed. Among the areas addressed are technical and human security threats, security and privacy issues for information in electronic mail systems, the need for a national commission to examine these issues, and security/privacy issues relevant to colleges and universities. (JN)

Socio-technical issues and challenges in implementing safe patient handovers: insights from ethnographic case studies.

PubMed

Balka, Ellen; Tolar, Marianne; Coates, Shannon; Whitehouse, Sandra

2013-12-01

Ineffective handovers in patient care, including those where information loss occurs between care providers, have been identified as a risk to patient safety. Computerization of health information is often offered as a solution to improve the quality of care handovers and decrease adverse events related to patient safety. The purpose of this paper is to broaden our understanding of clinical handover as a patient safety issue, and to identify socio-technical issues which may come to bear on the success of computer based handover tools. Three in depth ethnographic case studies were undertaken. Field notes were transcribed and analyzed with the aid of qualitative data analysis software. Within case analysis was performed on each case, and subsequently, cross case analyses were performed. We identified five types of socio-technical issues which must be addressed if electronic handover tools are to succeed. The inter-dependencies of these issues are addressed in relation to arenas in which health care work takes place. We suggest that the contextual nature of information, ethical and medico-legal issues arising in relation to information handover, and issues related to data standards and system interoperability must be addressed if computerized health information systems are to achieve improvements in patient safety related to handovers in care. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Towards technical interoperability in telemedicine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craft, Richard Layne, II

2004-05-01

For telemedicine to realize the vision of anywhere, anytime access to care, the question of how to create a fully interoperable technical infrastructure must be addressed. After briefly discussing how 'technical interoperability' compares with other types of interoperability being addressed in the telemedicine community today, this paper describes reasons for pursuing technical interoperability, presents a proposed framework for realizing technical interoperability, identifies key issues that will need to be addressed if technical interoperability is to be achieved, and suggests a course of action that the telemedicine community might follow to accomplish this goal.

Optimization of paper bridge loading for 2-DE analysis in the basic pH region: application to the mitochondrial subproteome.

PubMed

Kane, Lesley A; Yung, Christina K; Agnetti, Giulio; Neverova, Irina; Van Eyk, Jennifer E

2006-11-01

Separation of basic proteins with 2-DE presents technical challenges involving protein precipitation, load limitations, and streaking. Cardiac mitochondria are enriched in basic proteins and difficult to resolve by 2-DE. We investigated two methods, cup and paper bridge, for sample loading of this subproteome into the basic range (pH 6-11) gels. Paper bridge loading consistently produced improved resolution of both analytical and preparative protein loads. A unique benefit of this technique is that proteins retained in the paper bridge after loading basic gels can be reloaded onto lower pH gradients (pH 4-7), allowing valued samples to be analyzed on multiple pH ranges.

Documentation as Problem Solving for Literacy Outreach Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

2004-07-06

Age-appropriate technical writing lessons for underperforming high-school students can offer them an innovative, ''authentic'' way to improve how they read and write. Thus the techniques and principles of effective technical communication routinely applied at work also provide a positive response to one of today's great educational challenges. This workshop shows participants how to (1) introduce English and science teachers to the value of technical writing as a response to school literacy problems, (2) prepare plausible practice exercises to help students improve their basic literacy, and (3) recognize and respond to known literacy outreach pitfalls. Every effective literacy outreach project basedmore » on technical writing needs to address four key problems.« less

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 34: Linear Integrated Circuits. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on linear integrated circuits is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Two lessons are included in…

Welding As Science: Applying Basic Engineering Principles to the Discipline

NASA Technical Reports Server (NTRS)

Nunes, A. C., Jr.

2010-01-01

This Technical Memorandum provides sample problems illustrating ways in which basic engineering science has been applied to the discipline of welding. Perhaps inferences may be drawn regarding optimal approaches to particular welding problems, as well as for the optimal education for welding engineers. Perhaps also some readers may be attracted to the science(s) of welding and may make worthwhile contributions to the discipline.

Risk communication basics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corrado, P.G.

In low-trust, high-concern situations, 50% of your credibility comes from perceived empathy and caring, demonstrated in the first 30 s you come in contact with someone. There is no second chance for a first impression. These and other principles contained in this paper provide you with a basic level of understanding of risk communication. The principles identified are time-tested caveats and will assist you in effectively communicating technical information.

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 33: Special Devices. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on special devices is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Four lessons are included in the…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 25: Special Devices. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on special devices is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Two lessons are included in the module:…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 30: Intermediate Power Supplies. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on intermediate power supplies is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Four lessons are included…

IN-SITU CHEMICAL OXIDATION--ENGINEERING ISSUE

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) Engineering Issue Papers are a series of technology transfer documents that summarize the latest available information on specific technical issues, including fate and transport, specific contaminants, selected treatment and site rem...

Direct, Operational Field Test Evaluation, Institutional Issues

DOT National Transportation Integrated Search

1998-08-01

INSTITUTIONAL ISSUES HAVE BEEN DEFINED AS NON-TECHNICAL ISSUES OR CONCERNS THAT INFLUENCE THE COURSE AND OUTCOME OF AN OPERATIONAL TEST. OFTEN THEY ARE EVENTS AND/OR CIRCUMSTANCES THAT AFFECT ADMINISTRATION, DESIGN, DEPLOYMENT AND EVALUATION OF THE O...

Breaking Down Barriers: Certificate in Workplace Basic Skills Training for Adult Basic Education Tutors & Co-Ordinators.

ERIC Educational Resources Information Center

Frank, Fiona; Holland, Chris; Jeffery, Sue; Marquand, Alison; Noel, Alison

Designed to familiarize experienced and qualified basic skills tutors and coordinators with issues of teaching basic skills in the workplace in Great Britain, this course can be delivered by experienced workplace basic skills training program coordinators. It can be delivered over three days or as six half-day sessions. Each of the four units…

An Automatic Weather Station Network for Low-Altitude Wind Shear Investigations

DTIC Science & Technology

1984-09-18

information exchange. The United States Government assumes no liability for its contents or use thereof. 4 . ... . . . . . . . . . . . ... ° TECHNICAL REPORT...technical issues asso- ciated with unique FAA needs for weather information used by pilots, air traffic controllers and meteorologists. The weather radar...warnings be free of false alarms and be issued in a timely manner. During the summer of 1983, Lincoln began a long term study that places emphasis on

[Analysis of effect of prevention and control technique training of human important parasitic diseases in Jiangsu Province in 2017].

PubMed

Bi-Xian, Ni; Xiang-Zhen, Xu; Xiao-Ting, Wang; Ming-Xue, Sheng; Yang, Dai; Xiao-Lin, Jin

2017-07-24

To evaluate the effect of the prevention and control technique training of human important parasitic diseases for basic professional and technical personnel in Jiangsu Province in 2017. A workshop including theory courses and practical operations was carried out for the basic professional and technical personnel. At the end of the workshop, the effects were evaluated through the theoretical and microscopic examinations. There were 132 trainees from 13 cities, and all of them took part in the final examinations. The average score of total was 118.36. There were significant differences among different regions ( χ 2 = 13.38, P < 0.01). The pass rate of the theory test was 92.4% with the average score of 79.05. There were significant differences of theory scores among different regions ( χ 2 =14.51, P < 0.01). The theory score of Northern Jiangsu Province was significantly higher than the scores of Southern and Central Jiangsu Province ( P < 0.001, P = 0.009). The pass rate of microscopic examinations was 89.4% with the average score of 39.32. There was no significant difference of micro-scopic examination scores among different regions ( F = 2.37, P = 0.09). Among the total 7 species, the detection rate of Paragonimus westermani was the highest (75％) and the rates of Schistosoma japonicum and Fasciolopsis buski were only 51.5％ and 54.5% respectively. The detection rates of eggs of Trichuris trichiura , unfertilized Ascaris lumbricoides , Clonorchis sinensis and Taenia solium were 71.2%, 65.9%, 72.7% and 72.0% respectively. The training course has promoted the capability of prevention and control of parasitic diseases for basic technical personnel. Also it provides the technical supports for parasitic disease monitoring, control and risk assessment in the next step.

The Computer Science Technical Report (CS-TR) Project: A Pioneering Digital Library Project Viewed from a Library Perspective.

ERIC Educational Resources Information Center

Anderson, Greg; And Others

1996-01-01

Describes the Computer Science Technical Report Project, one of the earliest investigations into the system engineering of digital libraries which pioneered multiinstitutional collaborative research into technical, social, and legal issues related to the development and implementation of a large, heterogeneous, distributed digital library. (LRW)

ILGWU Worker-Family Education Program. ESL/Technical Curriculum Manual.

ERIC Educational Resources Information Center

Friedman, Judy; Friedman, Deidre

The curriculum for the International Ladies' Garment Workers' Union (ILGWU) English as a Second Language (ESL) and technical classes is a collection of instructional materials and suggestions focusing on workplace-related topics and issues. This guide is intended for use in classes where one technical and one ESL teacher are present and where…

Programs of Study: Year 2 Joint Technical Report. Research Snapshot

ERIC Educational Resources Information Center

National Research Center for Career and Technical Education, 2010

2010-01-01

In January 2010, the National Research Center for Career and Technical Education (NRCCTE) issued a progress report on three studies being conducted by the Center that examine the implementation and outcomes of Programs of Study (POS), which were required in the 2006 reauthorization of the federal legislation for career and technical education…

The Writer's Mind: Ethics in the Teaching of Technical Writing.

ERIC Educational Resources Information Center

Rubens, Philip M.

As opposed to being a "closed" text (tightly constrained by physical formats, corporate style, and specialized vocabulary), technical writing is actually "open" in the sense that such a text can be interpreted subjectively by an informed audience. Three ethical issues that should be explored in teaching technical writing include personality--the…

76 FR 60017 - Technical Conference on Penalty Guidelines; Notice of Technical Conference on Penalty Guidelines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

... Conference on Penalty Guidelines; Notice of Technical Conference on Penalty Guidelines The staff of the... the Penalty Guidelines, which the Commission issued on September 17, 2010.\\1\\ The conference will be... impact of the Penalty Guidelines on compliance and enforcement matters. More information on the topics to...

76 FR 78641 - Southwestern Gas Storage Technical Conference; Notice of Public Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-19

... Storage Technical Conference; Notice of Public Conference Take notice that on February 16, 2012 at 9 a.m... technical conference with interested parties to discuss issues related to natural gas storage development in... Cold Weather Event of February 1-5, 2011: Causes and Recommendations, ``[a]dditional gas storage...

"Crafts and Technology" and "Technical Education" in Austria

ERIC Educational Resources Information Center

Seiter, Josef

2009-01-01

In Austria, the syllabus for "Technisches Werken/Crafts and Technology" for all types of school in general education was issued more than 30 years ago. The authors believed that it might lay the foundations for technical literacy. The paper is about how the situation of the subject and, with it, technical education has developed since…

Bibliography of Lewis Research Center technical publications announced in 1981

NASA Technical Reports Server (NTRS)

1982-01-01

Technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1981 are indexed and abstracted. All the publications were announced in the 1981 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patent applications, and theses. A total of 384 technical publications is listed.

Online Hazardous Waste Cleanup Technical Resources

EPA Pesticide Factsheets

This issue paper is intended to give the reader examples of some online technical resources that can assist with hazardous waste cleanups in the Superfund, Resource Conservation and Recovery Act (RCRA), and Brownfields programs.

75 FR 51239 - Census Scientific Advisory Committee; Notice of Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-19

... Advisory Committee (C-SAC). The Committee will address policy, research, and technical issues relating to a.... The Committee provides scientific and technical expertise, as appropriate, to address Census Bureau...

32 CFR Appendix A to Part 275 - Obtaining Basic Identifying Account Information

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Obtaining Basic Identifying Account Information... Information A. A DoD law enforcement office may issue a formal written request for basic identifying account... only the above specified basic identifying information concerning a customer's account. C. A format for...

Focus on Basics: Connecting Research & Practice. Volume 6, Issue B

ERIC Educational Resources Information Center

Garner, Barbara, Ed.

2003-01-01

"Focus on Basics" is the quarterly publication of the National Center for the Study of Adult Learning and Literacy. It presents best practices, current research on adult learning and literacy, and how research is used by adult basic education teachers, counselors, program administrators, and policymakers. "Focus on Basics" is dedicated to…

Focus on Basics: Connecting Research and Practice. Volume 6, Issue D

ERIC Educational Resources Information Center

National Center for the Study of Adult Learning and Literacy (NCSALL), Harvard University, 2004

2004-01-01

"Focus on Basics" is the quarterly publication of the National Center for the Study of Adult Learning and Literacy. It presents best practices, current research on adult learning and literacy, and how research is used by adult basic education teachers, counselors, program administrators, and policymakers. "Focus on Basics" is dedicated to…

Drug Abuse and Drug Abuse Research. The Third Triennial Report to Congress from the Secretary, Department of Health and Human Services.

ERIC Educational Resources Information Center

National Inst. on Drug Abuse (DHHS/PHS), Rockville, MD.

This report summarizes changes that have occurred in understanding of the health implications of the use and abuse of illegal and legal drugs as a result of research since 1986. It is noted that wherever possible, research findings have been summarized in non-technical language. Some technical material is included because of its basic importance…

Information Hang-Ups; Problems Encountered by Users of the Technical Information Services Offered by DDC and CFSTI, with Recommendations for the Future.

ERIC Educational Resources Information Center

Committee of DDC Users in the Greater Washington, DC. Area, Washington, DC.

A change in policy of the Defense Documentation Center (DDC) with regard to supplying hard copy and/or microforms of reports caused problems to users of the DDC Technical Report Service. Discussions among users of the service, a questionnaire survey and committee reports summarized basic user concerns, provided selected statistics and a look at…

JPRS Report, Science & Technology, USSR: Science and Technology Policy.

DTIC Science & Technology

1988-03-03

accordance with the Kazakhstan Regional Scientific Research Program, which is called upon to unite scientific development of a basic and applied nature...Resources for 1986-1990 and the Period to 2000." The institute is a part of the union Avtogennyye protsessy Scientific Technical Complex and the...republic Tsvetnaya metallurgiya Scientific Technical Complex and is participating in the work of the creative youth collective for the automation of

Bibliographies.

ERIC Educational Resources Information Center

Bourdon, Cathleen

1999-01-01

Provides "The Librarian's Bookshelf" a selected annotated bibliography of books (mostly published since 1995) to help librarians deal with the issues of providing appropriate service to children and adults. Lists titles alphabetically in several categories of technical services and issues, instruction, information services, legal issues,…

ERCMExpress. Volume 3, Issue 4

ERIC Educational Resources Information Center

Taymans, Mary Frances; McDonald, Dale

2007-01-01

The Emergency Response and Crisis Management (ERCM) Technical Assistance Center's "ERCMExpress" is a newsletter that provides comprehensive information on key issues in school emergency management. This issue, entitled "Emergency Management Opportunities and Challenges for Non-Public Schools," examines integrating non-public…

In this issue: from basic immunology to oncogenesis and inflammation.

PubMed

Bot, Adrian

2013-06-01

This issue of the International Reviews of Immunology features very diverse topics from basic immunology to inflammation, oncogenesis and immunopathology. Specifically, this volume hosts reviews describing the role of TCRγδ T cells, the significance of Epstein Barr virus-associated miRNAs and the genetic basis of Hashimoto's thyroiditis along with other reviews on the topics mentioned above.

Achieving Successful Employment Outcomes with the Use of Assistive Technology. Report from the Study Group, Institute on Rehabilitation Issues (24th, Washington, DC, May 1998).

ERIC Educational Resources Information Center

Radtke, Jean, Ed.

Developed as a result of an institute on rehabilitation issues, this document is a guide to assistive technology as it affects successful competitive employment outcomes for people with disabilities. Chapter 1 offers basic information on assistive technology including basic assumptions, service provider approaches, options for technology…

NPDES Permit Writers' Course

EPA Pesticide Factsheets

The objective of the NPDES permit writers' course is to provide the basic regulatory framework and technical considerations that support the development of wastewater discharge permits as required under the NPDES Permit Program.

Building Science-Relevant Literacy with Technical Writing in High School

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

2006-06-02

By drawing on the in-class work of an on-going literacy outreach project, this paper explains how well-chosen technical writing activities can earn time in high-school science courses by enabling underperforming students (including ESL students) to learn science more effectively. We adapted basic research-based text-design and usability techniques into age-appropriate exercises and cases using the cognitive apprenticeship approach. This enabled high-school students, aided by explicit guidelines, to build their cognitive maturity, learn how to craft good instructions and descriptions, and apply those skills to better note taking and technical talks in their science classes.

Leveraging Independent Management and Chief Engineer Hierarchy: Vertically and Horizontally-Derived Technical Authority Value

NASA Technical Reports Server (NTRS)

Barley, Bryan; Newhouse, Marilyn

2012-01-01

In the development of complex spacecraft missions, project management authority is usually extended hierarchically from NASA's highest agency levels down to the implementing institution's project team level, through both the center and the program. In parallel with management authority, NASA utilizes a complementary, but independent, hierarchy of technical authority (TA) that extends from the agency level to the project, again, through both the center and the program. The chief engineers (CEs) who serve in this technical authority capacity oversee and report on the technical status and ensure sound engineering practices, controls, and management of the projects and programs. At the lowest level, implementing institutions assign project CEs to technically engage projects, lead development teams, and ensure sound technical principles, processes, and issue resolution. At the middle level, programs and centers independently use CEs to ensure the technical success of their projects and programs. At the agency level, NASA's mission directorate CEs maintain technical cognizance over every program and project in their directorate and advise directorate management on the technical, cost, schedule, and programmatic health of each. As part of this vertically-extended CE team, a program level CE manages a continually varying balance between penetration depth and breadth across his or her assigned missions. Teamwork issues and information integration become critical for management at all levels to ensure value-added use of both the synergy available between CEs at the various agency levels, and the independence of the technical authority at each organization.

Gaia: focus, straylight and basic angle

NASA Astrophysics Data System (ADS)

Mora, A.; Biermann, M.; Bombrun, A.; Boyadjian, J.; Chassat, F.; Corberand, P.; Davidson, M.; Doyle, D.; Escolar, D.; Gielesen, W. L. M.; Guilpain, T.; Hernandez, J.; Kirschner, V.; Klioner, S. A.; Koeck, C.; Laine, B.; Lindegren, L.; Serpell, E.; Tatry, P.; Thoral, P.

2016-07-01

The Gaia all-sky astrometric survey is challenged by several issues affecting the spacecraft stability. Amongst them, we find the focus evolution, straylight and basic angle variations Contrary to pre-launch expectations, the image quality is continuously evolving, during commissioning and the nominal mission. Payload decontaminations and wavefront sensor assisted refocuses have been carried out to recover optimum performance. An ESA-Airbus DS working group analysed the straylight and basic angle issues and worked on a detailed root cause analysis. In parallel, the Gaia scientists have also analysed the data, most notably comparing the BAM signal to global astrometric solutions, with remarkable agreement. In this contribution, a status review of these issues will be provided, with emphasis on the mitigation schemes and the lessons learned for future space missions where extreme stability is a key requirement.

76 FR 19766 - California Independent System Operator Corporation; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-08

...) Capacity Procurement Mechanism (CPM) and exceptional dispatch mitigation provisions.\\1\\ Take notice that... (2011). The purpose of the technical conference is to discuss the issues raised by CAISO's proposed CPM...

Finance Program, Technical Assistance Brief 1

DOT National Transportation Integrated Search

1993-01-01

This four page pamphlet highlights the work of the Federal Transit : Administration's Office of Technical Assistance and Safety. Articles in this : issue are: Transit's Finance Challenge, which discusses the three main aspects : of the Office's Finan...

Approach to implementing a DICOM network: incorporate both economics and workflow adaptation

NASA Astrophysics Data System (ADS)

Beaver, S. Merritt; Sippel-Schmidt, Teresa M.

1995-05-01

This paper describes an approach to aide in the decision-making process for the justification and design of a digital image and information management system. It identifies key technical and clinical issues that need to be addressed by a healthcare institution during this process. Some issues identified here are very controversial and may take months or years for a department to determine solutions which meet their specific staffing, financial, and technical needs.

New Frameworks for Detecting and Minimizing Information Leakage in Anonymized Network Data

DTIC Science & Technology

2011-10-01

researcher the exact extent to which a particular utility is affected by the anonymization. For instance, Karr et al.’s use of the Kullback - Leibler ...technical, legal, policy, and privacy issues limit the ability of operators to produce data sets for information security testing . In an effort to...technical, legal, policy, and privacy issues limit the ability of operators to produce datasets for information security testing . In an effort to help

Technical Issues in Evolving to Integrated Services Digital Network (ISDN)

DTIC Science & Technology

1991-06-01

channel through some Page 13 Technical Issues in Evolving to ISDN Final Report separate interface (such as the AT command set of the Hayes modems or the...errors experienced over standard modem provided connectivity. But, in this project connectivity has been established only over a single CO. Those...examined to some extent and are discussed below. Existing equipment was of two types: that which treats ISDN as just another leased line providing 56k or

PUBLIC POLICY ISSUES, REPLY LEGAL BRIEF, AND TECHNICAL AND ECONOMIC DATA, BEFORE THE FEDERAL COMMUNICATIONS COMMISSION, IN THE MATTER OF THE ESTABLISHMENT OF DOMESTIC COMMUNICATIONS SATELLITE FACILITIES BY NON-GOVERNMENTAL ENTITIES, DOCKET 16495.

ERIC Educational Resources Information Center

Ford Foundation, New York, NY.

THE THREE PARTS OF THIS FORD FUNDATION SUBMISSION PROVIDE INFORMATION ON BROAD ISSUES OF ORGANIZATION AND PUBLIC POLICY AS THEY RELATE TO SATELLITE MODEL SYSTEMS BNS-3 AND BNS-4, ON LEGAL PROBLEMS OF AUTHORIZATION AND CONTROL, AND ON THE TECHNICAL CHARACTERISTICS, COSTS, AND BROADCAST SPECTRUM LIMITATIONS OF EACH SYSTEM. VOLUME I OUTLINES…

Market and policy barriers to deployment of energy storage

DOE PAGES

Sioshansi, Ramteen; Denholm, Paul; Jenkin, Thomas

2012-04-01

There has recently been resurgent interest in energy storage, due to a number of developments in the electricity industry. Despite this interest, very little storage, beyond some small demonstration projects, has been deployed recently. While technical issues, such as cost, device efficiency, and other technical characteristics are often listed as barriers to storage, there are a number of non-technical and policy-related issues. This paper surveys some of these main barriers and proposes some potential research and policy steps that can help address them. Furthermore, while the discussion is focused on the United States, a number of the findings and observationsmore » may be more broadly applicable.« less

76 FR 7810 - Notice of Proposed Change to Section I of the South Dakota and North Dakota State Technical Guides

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

... must be made to the NRCS State Technical Guides concerning State wetland mapping conventions. The two States are proposing to issue joint State wetland mapping conventions. The joint State wetland mapping conventions will be used as part of the technical documents to conduct wetland determinations on agriculture...

Use of Career Education and Occupation Information Services in Boosting Enrolment into Vocational and Technical Education Programs in Nigeria

ERIC Educational Resources Information Center

Igbinedion, V. I.; Ojeaga, I. J.

2012-01-01

The major thrust of technical and vocational education (TVE) worldwide is to address issues of youth unemployment, poverty and international competitiveness in skills development towards current and projected opportunities and challenges. The paper posits that despite the evidence of numerous reforms in vocational and technical education programs…

76 FR 11417 - Public Workshop and Hearing for Rear Visibility; Federal Motor Vehicle Safety Standard, Rearview...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

...), Department of Transportation (DOT). ACTION: Notice of proposed rulemaking: Announcement of a public technical... this proposal. The first event, a public technical workshop, will be held on March 11, 2011, to discuss technical issues relevant to the test procedure described in the proposed rule. The second event, a public...

Government Information Quarterly. Volume 7, no. 2: National Aeronautics and Space Administration Scientific and Technical Information Programs. Special issue

NASA Technical Reports Server (NTRS)

Hernon, Peter (Editor); Mcclure, Charles R. (Editor); Pinelli, Thomas E. (Editor)

1990-01-01

NASA scientific and technical information (STI) programs are discussed. Topics include management of information in a research and development agency, the new space and Earth science information systems at NASA's archive, scientific and technical information management, and technology transfer of NASA aerospace technology to other industries.

77 FR 74658 - Texas Eastern Transmission, LP; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-17

...-captioned proceeding \\1\\ directed that a technical conference be held to address issues raised by Texas... adjustments. \\1\\ Texas Eastern Transmission, LP, 141 FERC ]61,172 (2012). Take notice that a technical conference will be held on Tuesday, January 15, 2013 at 9:30 a.m., in a room to be designated at the offices...

TRICHLOROETHYLENE (TCE) ISSUE PAPERS

EPA Science Inventory

These issue papers are a part of EPA's effort to develop a trichloroethylene (TCE) human health risk assessment. These issue papers were developed by EPA to provide scientific and technical information to the National Academy of Sciences (NAS) for use in developing their advice ...

Building Your Campus Portal: Advice from the Field.

ERIC Educational Resources Information Center

Krebs, Arlene

2001-01-01

Discusses portal technology in higher education, including planning, design, technical, and financial issues. Highlights include determining the customers; marketing possibilities for the university; ownership issues; data design; effective cost structuring; security issues; adaptability; content; and customer input and feedback. (LRW)

[A network to promote health systems based on primary health care in the Region of the Americas].

PubMed

Herrera Vázquez, María Magdalena; Rodríguez Avila, Nuria; Nebot Adell, Carme; Montenegro, Hernán

2007-05-01

To identify the relational components of an international network of organizations that provide technical and financial assistance to promote the development of health systems based on primary health care in the countries of the Region of the Americas; to analyze the linkages that would allow the collaborating partners of the Pan American Health Organization (PAHO) to work together on health issues; and to determine the basic theoretical elements that can help to develop action strategies that support advocacy efforts by a network. This was a qualitative and quantitative cross-sectional study based on identifying key informants and on analyzing social networks. Ethnographic and relational information from 46 international organizations was collected through a self-administered semistructured questionnaire. From 46 international health cooperation organizations, 29 decision makers from 29 organizations participated (63.0% response rate). The structure and the strength of the network was evaluated in terms of density, closeness, clustering, and centralization. The statistical analysis was done using computer programs that included UCINET, Pajek, and Microsoft Access. We found a structurally centralized theoretical network, whose nodes were clustered into four central subgroups linked by a shared vision. The leadership, influence, and political interests reflected the formal and technical-cooperation linkages, the formal support for health systems based on primary health care, and the flow of resources being more often technical ones than financial ones. The interorganizational relational components and the social-action ties that were identified could help in the development and consolidation of a thematic network for advocacy and for the management of technical and financial assistance that supports primary health care in the Americas. The linkages for joint action that were identified could advance international cooperation in developing health systems based on primary health care, once PAHO formulates clear implementation strategies and takes a leadership position in mobilizing financial resources and in creating informal and interpersonal linkages for action.

Internet Research: Implications for The Future of Health Care

PubMed Central

Shortliffe, Ted

1999-01-01

The phenomenal growth in Internet usage, largely due to the success of the World Wide Web, has stressed the international networking infrastructure in ways that were never contemplated when the early ARPAnet emerged from research laboratories in the 1970s. Some of the challenges are logistical and legal, and have to do with management of domain names, intellectual-property agreements, and international business activities. Others are technical, resulting both because we are envisioning applications that the current Internet cannot support, and because the existing infrastructure cannot scale to a world in which a huge portion of the world's population is online and individual homes and businesses may have IP addresses for tens of electronic devices, such as appliances, heating systems, or security alarms. In this presentation, I will discuss some of the US research and testbed activities that are currently underway in an effort to respond to the technical challenges. These include the Internet-2 testbed created by a consortium of academic institutions, and the federal government's Next Generation Internet research initiative. I will explain the difference between these two programs and identify some of the technical requirements other than a simple increase in bandwidth that have been identified for the evolving Internet. This will lead to a discussion of the limitations of the current Internet that have constrained its use in health care and that accordingly help to define the networking research agenda that is of greatest importance to the biomedical community. Policy and regulatory issues that arise because of health care's use of the Internet will also be discussed, as will those technical requirements that may be unique to biomedical applications. One goal of the discussion will be to motivate an international discussion of the ways in which the medical informatics community should be engaged in both basic and applied research in the area of networking and the future of the Internet."

Enhancing US competitiveness through Federal scientific and technical information: Issues and opportunities

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.

1990-01-01

The possibility of using Federally funded scientific and technical information (STI) to increase U.S. industrial innovation and productivity is discussed. The history of Federally funded research and development in the fields of agriculture and aviation is reviewed as an example of successful government-sponsored research. Issues related to the production and utilization of information are considered and Federal STI policy is outlined. Issues related to the transfer of knowledge between government agencies and industry are examined and a model depicting the transfer of STI in aerospace research and development is presented. Also, consideration is given to the problem of open communication versus restricted access to STI.

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics Individualized Learning System. CANTRAC A-100-0010. Module Eleven: Capacitance. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on capacitance is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Seven lessons are included in the module:…

Mathematics Course Requirements and Performance Levels in the Navy's Basic Electricity and Electronics Schools. Technical Report, March 1980-December 1980.

ERIC Educational Resources Information Center

Baker, Meryl S.

Instructors in the Navy's Basic Electricity and Electronics (BE/E) schools were presented with a list of 70 mathematical skills and asked to indicate: (1) how important they were to successful BE/E school performance, and (2) whether they were prerequisite, reviewed, or taught in the schools. Also, they were asked to state the number and type of…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics Individualized Learning System. CANTRAC A-100-0010. Module Two: Voltage. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on voltage is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Six lessons are included in the module: (1)…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics Individualized Learning System. CANTRAC A-100-0010. Module Ten: Transformers. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on transformers is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Six lessons are included in the module:…

The Relationships between the Iowa Test of Basic Skills and the Washington Assessment of Student Learning in the State of Washington. Technical Report.

ERIC Educational Resources Information Center

Joireman, Jeff; Abbott, Martin L.

This report examines the overlap between student test results on the Iowa Test of Basic Skills (ITBS) and the Washington Assessment of Student Learning (WASL). The two tests were compared and contrasted in terms of content and measurement philosophy, and analyses studied the statistical relationship between the ITBS and the WASL. The ITBS assesses…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics Individualized Learning System. CANTRAC A-100-0010. Module Six: Parallel Circuits. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on parallel circuits is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Four lessons are included in the…

Shoulder arthroscopy: the basics.

PubMed

Farmer, Kevin W; Wright, Thomas W

2015-04-01

Shoulder arthroscopy is a commonly performed and accepted procedure for a wide variety of pathologies. Surgeon experience, patient positioning, knowledge of surgical anatomy, proper portal placement, and proper use of instrumentation can improve technical success and minimize complication risks. This article details the surgical anatomy, indications, patient positioning, portal placement, instrumentation, and complications for basic shoulder arthroscopy. Copyright © 2015 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Behavioral Science Design for Audio-Visual Software Development

ERIC Educational Resources Information Center

Foster, Dennis L.

1974-01-01

A discussion of the basic structure of the behavioral audio-visual production which consists of objectives analysis, approach determination, technical production, fulfillment evaluation, program refinement, implementation, and follow-up. (Author)