The Basic Organizing/Optimizing Training Scheduler (BOOTS): User's Guide. Technical Report 151.

ERIC Educational Resources Information Center

Church, Richard L.; Keeler, F. Laurence

This report provides the step-by-step instructions required for using the Navy's Basic Organizing/Optimizing Training Scheduler (BOOTS) system. BOOTS is a computerized tool designed to aid in the creation of master training schedules for each Navy recruit training command. The system is defined in terms of three major functions: (1) data file…

Basic relationships for LTA technical analysis

NASA Technical Reports Server (NTRS)

Ausrotas, R. A.

1975-01-01

An introduction to airship performance is presented. Static lift equations are shown which, when combined with power requirements for conventional airships, allow parametric studies of range, payload, speed and airship size. It is shown that very large airships are required to attain reasonable speeds at transoceanic ranges.

NPDES Permit Writers' Course

EPA Pesticide Factsheets

The objective of the NPDES permit writers' course is to provide the basic regulatory framework and technical considerations that support the development of wastewater discharge permits as required under the NPDES Permit Program.

Fieldcrest Cannon, Inc. Advanced Technical Preparation. Statistical Process Control (SPC). PRE-SPC 11: SPC & Graphs. Instructor Book.

ERIC Educational Resources Information Center

Averitt, Sallie D.

This instructor guide, which was developed for use in a manufacturing firm's advanced technical preparation program, contains the materials required to present a learning module that is designed to prepare trainees for the program's statistical process control module by improving their basic math skills in working with line graphs and teaching…

Basic Skills Resource Center. Part 2

DTIC Science & Technology

1985-05-01

side if neceseary and Identify by block number) Basic Skills Education Curriculum Development Learning Strategies Reading Comprehension Motivational ... Motivational Skills Training for Military Technical Training Students ...... Barbara L. McCombs 25 Problem 27 Purpose 27 Approach 28 - Phase 1 28 - Phase...and Learning ...... John J. Hedl , Jr. 53 Purpose of Project 55 Description of Work 55 V Products 56 Virtual Videodisc Software Requirements ...... J.D

14 CFR 21.603 - Application.

Code of Federal Regulations, 2014 CFR

2014-01-01

... for that article. (2) One copy of the technical data required in the applicable TSO. (b) If the... its application the basic model number of the article and the part number of the components with open...

14 CFR 21.603 - Application.

Code of Federal Regulations, 2013 CFR

2013-01-01

... for that article. (2) One copy of the technical data required in the applicable TSO. (b) If the... its application the basic model number of the article and the part number of the components with open...

On the Logic and Process of Collaborative Innovation in Higher Vocational Education and Industrial Development

ERIC Educational Resources Information Center

Zhibin, Tang; Weiping, Shi

2017-01-01

Modern development of vocational education requires the joint participation of multiple departments and entities, and industry-education cooperation is a basic requirement. Against the backdrop of the third industrial revolution, cultivating skilled, innovative graduates and transforming the model of industrial technical innovation requires…

A Fast Solution of the Lindley Equations for the M-Group Regression Problem. Technical Report 78-3, October 1977 through May 1978.

ERIC Educational Resources Information Center

Molenaar, Ivo W.

The technical problems involved in obtaining Bayesian model estimates for the regression parameters in m similar groups are studied. The available computer programs, BPREP (BASIC), and BAYREG, both written in FORTRAN, require an amount of computer processing that does not encourage regular use. These programs are analyzed so that the performance…

NASA Docking System (NDS) Users Guide: International Space Station Program. Type 4

NASA Technical Reports Server (NTRS)

Tabakman, Alexander

2010-01-01

The NASA Docking System (NDS) Users Guide provides an overview of the basic information needed to integrate the NDS onto a Host Vehicle (HV). This Users Guide is intended to provide a vehicle developer with a fundamental understanding of the NDS technical and operations information to support their program and engineering integration planning. The Users Guide identifies the NDS Specification, Interface Definition or Requirement Documents that contain the complete technical details and requirements that a vehicle developer must use to design, develop and verify their systems will interface with NDS. This Guide is an initial reference and must not be used as a design document. In the event of conflict between this Users Guide and other applicable interface definition or requirements documents; the applicable document will take precedence. This Users Guide is organized in three main sections. Chapter 1 provides an overview of the NDS and CDA hardware and the operations concepts for the NDS. Chapter 2 provides information for Host Vehicle Program integration with the NDS Project Office. Chapter 2 describes the NDS Project organization, integration and verification processes, user responsibilities, and specification and interface requirement documents. Chapter 3 provides a summary of basic technical information for the NDS design. Chapter 3 includes NDS hardware component descriptions, physical size and weight characteristics, and summary of the capabilities and constraints for the various NDS sub-systems.

Mathematics Course Requirements and Performance Levels in the Navy's Basic Electricity and Electronics Schools. Technical Report, March 1980-December 1980.

ERIC Educational Resources Information Center

Baker, Meryl S.

Instructors in the Navy's Basic Electricity and Electronics (BE/E) schools were presented with a list of 70 mathematical skills and asked to indicate: (1) how important they were to successful BE/E school performance, and (2) whether they were prerequisite, reviewed, or taught in the schools. Also, they were asked to state the number and type of…

A basic interpretation of the technical language of radiation processing

NASA Astrophysics Data System (ADS)

Deeley, Catherine M.

2004-09-01

For the food producer contemplating the purchase of radiation processing equipment the task of evaluating the strengths and weaknesses of the available technologies, electron beam (E-beam), X-ray and gamma, to determine the best option for their application, is onerous. Not only is the level of investment daunting but also, to be sure of comparing like with like, the evaluator requires a basic understanding of the science underpinning radiation processing. There have been many papers published that provide technical specialists with a rigorous interpretation of this science (In: Gaughran, E.R.L., Goudie, A.J. (Eds.), Technical Developments and Prospects of Sterilization by Ionizing Radiation, International Conference, Vienna. Multiscience Publications Ltd., pp. 145-172). The objective for this paper is to give non-specialists an introduction to the language of radiation processing and to clarify some of the terminology associated with the use of radioactive sources for this application.

Groundwater and Distribution Workbook.

ERIC Educational Resources Information Center

Ekman, John E.

Presented is a student manual designed for the Wisconsin Vocational, Technical and Adult Education Groundwater and Distribution Training Course. This program introduces waterworks operators-in-training to basic skills and knowledge required for the operation of a groundwater distribution waterworks facility. Arranged according to the general order…

Human research ethics committees in technical universities.

PubMed

Koepsell, David; Brinkman, Willem-Paul; Pont, Sylvia

2014-07-01

Human research ethics has developed in both theory and practice mostly from experiences in medical research. Human participants, however, are used in a much broader range of research than ethics committees oversee, including both basic and applied research at technical universities. Although mandated in the United States, the United Kingdom, Canada, and Australia, non-medical research involving humans need not receive ethics review in much of Europe, Asia, Latin America, and Africa. Our survey of the top 50 technical universities in the world shows that, where not specifically mandated by law, most technical universities do not employ ethics committees to review human studies. As the domains of basic and applied sciences expand, ethics committees are increasingly needed to guide and oversee all such research regardless of legal requirements. We offer as examples, from our experience as an ethics committee in a major European technical university, ways in which such a committee provides needed services and can help ensure more ethical studies involving humans outside the standard medical context. We provide some arguments for creating such committees, and in our supplemental article, we provide specific examples of cases and concerns that may confront technical, engineering, and design research, as well as outline the general framework we have used in creating our committee. © The Author(s) 2014.

Extravehicular activity at geosynchronous earth orbit

NASA Technical Reports Server (NTRS)

Shields, Nicholas, Jr.; Schulze, Arthur E.; Carr, Gerald P.; Pogue, William

1988-01-01

The basic contract to define the system requirements to support the Advanced Extravehicular Activity (EVA) has three phases: EVA in geosynchronous Earth orbit; EVA in lunar base operations; and EVA in manned Mars surface exploration. The three key areas to be addressed in each phase are: environmental/biomedical requirements; crew and mission requirements; and hardware requirements. The structure of the technical tasks closely follows the structure of the Advanced EVA studies for the Space Station completed in 1986.

A Basic Unit on Ethics for Technical Communicators.

ERIC Educational Resources Information Center

Markel, Mike

1991-01-01

Describes a basic unit on ethics for technical communicators and offers suggestions on how to go about teaching the unit. Includes a brief definition of ethics, an explanation of the employee's three basic obligations, ways to analyze common dilemmas in technical communication, the role of the code of conduct, and a case study. (SR)

Apprenticeship: Past and Present

ERIC Educational Resources Information Center

La Luz, 1977

1977-01-01

Rapid changes in our industrial system require a large body of skilled workers who are able to carry out technical specifications and who can supervise less skilled members of the work force. This article discusses modern apprenticeship programs, certificates of completion, joint apprenticeship committees, basic standards for apprenticeship, and…

How does PET/MR work? Basic physics for physicians.

PubMed

Delso, Gaspar; Ter Voert, Edwin; Veit-Haibach, Patrick

2015-08-01

The aim of this article is to provide Radiologists and Nuclear Medicine physicians the basic information required to understand how PET/MR scanners work, what are their limitations and how to evaluate their performance. It will cover the operational principles of standalone PET and MR imaging, as well as the technical challenges of creating a hybrid system and how they have been solved in the now commercially available scanners. Guidelines will be provided to interpret the main performance figures of hybrid PET/MR systems.

Lithographic Stripping; Printing 2: 9755.03.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The course is one of a group which provides 11th grade students with the general information, technical knowledge, basic skills, attitudes, and values required for job entry level in printing. The course is 90 hours in length. Course content includes goals, specific objectives, orientation, safety in the stripping department, and a stripping…

Automotive Body Fillers; Auto Body Repair and Refinishing 2: 9035.03.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This course provides students with the general information, technical knowledge, basic skills, attitudes, and values required for job entry level as an auto body repair helper. Course content includes goals, specific objectives, orientation, filling with body solder, and plastic filler. A post-test sample is appended. (NH)

Platemaking; Printing 2: 9755.04.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The course is one of a group which provides 11th grade students with the general information, technical knowledge, basic skills, attitudes, and values required for job entry level in the printing industry. Course content includes goals, specific objectives, orientation, types of lithographic plates, surface plates for offset, wipe-on plates,…

Nonregenerative life-support systems for flights of short and moderate duration

NASA Technical Reports Server (NTRS)

Adamovich, B. A.

1975-01-01

The basic requirements for crew life support systems of flights of up to 30 days are described. Food products, drinking water, oxygen for breathing, and sanitary-technical facilities are among the factors considered. Life support systems utilized on Vostok, Voskhod, Soyuz, Gemini, Mercury, and Apollo are discussed.

Physics Laboratory in UEC

NASA Astrophysics Data System (ADS)

Takada, Tohru; Nakamura, Jin; Suzuki, Masaru

All the first-year students in the University of Electro-Communications (UEC) take "Basic Physics I", "Basic Physics II" and "Physics Laboratory" as required subjects; Basic Physics I and Basic Physics II are calculus-based physics of mechanics, wave and oscillation, thermal physics and electromagnetics. Physics Laboratory is designed mainly aiming at learning the skill of basic experimental technique and technical writing. Although 95% students have taken physics in the senior high school, they poorly understand it by connecting with experience, and it is difficult to learn Physics Laboratory in the university. For this reason, we introduced two ICT (Information and Communication Technology) systems of Physics Laboratory to support students'learning and staff's teaching. By using quantitative data obtained from the ICT systems, we can easily check understanding of physics contents in students, and can improve physics education.

Certified records manager exam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-01-01

The Institute of Certified Records Managers (ICRM) is a non-profit, certifying organization of professional records managers and administrators. ICRM members are experienced in information requirements, records and information systems, and the related office systems and technologies. All members have met certification requirements and have received the Certified Records Manager (CRM) designation. As the field of information and records management moves toward standardization, and as the application of new technologies and technicalities complicate the measurement and demonstration of professional competence, the need for a means of identifying persons who have basic competency increases. The ICRM is providing such a means bymore » testing and certifying basic knowledge. More and more job announcements are requiring this evidence of competency. Unfortunately, as an organization, NIRMA has a relatively small number of CRMs. The goal of the ICRM Development Group is two-fold; (1) to encourage NIRMA members to obtain their certification by providing basic information and support and; (2) to develop the Nuclear Specialist test module which will demonstrate that bearers have demonstrated expertise in nuclear records management as well as basic competencies. This report covers the examination process.« less

Fire safety: A case study of technology transfer

NASA Technical Reports Server (NTRS)

Heins, C. F.

1975-01-01

Two basic ways in which NASA-generated technology is being used by the fire safety community are described. First, improved products and systems that embody NASA technical advances are entering the marketplace. Second, NASA test data and technical information related to fire safety are being used by persons concerned with reducing the hazards of fire through improved design information and standards. The development of commercial fire safety products and systems typically requires adaptation and integration of aerospace technologies that may not have been originated for NASA fire safety applications.

Auto Body Repair and Refinishing 2; Automotive Refinishing 1: 9035.04.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This course will provide the student with the general information, technical knowledge, basic skills, attitudes and values required for job entry as an auto body repair helper. Course content includes goals, specific objectives, orientation, service tools and bench skills, paint spray equipment, paint materials, and preparation of automobile body…

Basic Gas Welding; Welding 3: 9947.01.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The 135 hour course is designed to help the student become proficient in the technical and manipulative skills necessary to enter the various fields of industry and manufacturing. The necessary requirement for entering this course is the desire to use the acquired ability as a trade, in conjunction with another trade, or as background material for…

Masonry. Vocational Education Curriculum Guide. Industrial and Technical Education.

ERIC Educational Resources Information Center

West Virginia State Vocational Curriculum Lab., Cedar Lakes.

This curriculum guide contains five units that provide the basic curriculum components required to develop lesson plans for the masonry curriculum. The guide is not intended to be a complete, self-contained curriculum, but instead provides the teacher with a number of informational items related to the learning outcomes and allows the teacher…

Overview of Project Year 2000 in Rhode Island Public Higher Education.

ERIC Educational Resources Information Center

Rhode Island State Board of Governors for Higher Education, Providence.

This monthly report documents the accomplishments of the Year 2000 project in Rhode Island's public higher education. It reviews computer problems related to the Year 2000 date change, noting the basic technical solution necessary to avoid disruption to higher education, and summarizes Executive Order 99-1, issued in January 1999, requiring all…

Competence by Simulation: The Expert Nurse Continuing Education Experience Utilizing Simulation

ERIC Educational Resources Information Center

Underwood, Douglas W.

2013-01-01

Registered nurses practice in an environment that involves complex healthcare issues requiring continuous learning and evaluation of cognitive and technical skills to ensure safe and quality patient care. The purpose of this basic qualitative study was to gain a better understanding of the continuing educational needs of the expert nurse. This…

Fruit and Nut Production. Teacher Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This instructor's guide contains the materials required to teach the fruit and nut production component of a competency-based horticulture course that is intended to provide students with technical skills and the basic business skills to run a successful operation or be a productive employee. The following topics are covered in the 12…

22 CFR 120.10 - Technical data.

Code of Federal Regulations, 2013 CFR

2013-04-01

... software as defined in § 120.10(a)(4), which is required for the design, development, production... by an invention secrecy order; (4) Software as defined in § 121.8(f) of this subchapter directly... information in the public domain as defined in § 120.11. It also does not include basic marketing information...

22 CFR 120.10 - Technical data.

Code of Federal Regulations, 2011 CFR

2011-04-01

... software as defined in § 120.10(a)(4), which is required for the design, development, production... by an invention secrecy order; (4) Software as defined in § 121.8(f) of this subchapter directly... information in the public domain as defined in § 120.11. It also does not include basic marketing information...

22 CFR 120.10 - Technical data.

Code of Federal Regulations, 2012 CFR

2012-04-01

... software as defined in § 120.10(a)(4), which is required for the design, development, production... by an invention secrecy order; (4) Software as defined in § 121.8(f) of this subchapter directly... information in the public domain as defined in § 120.11. It also does not include basic marketing information...

Electrical Occupations and Residential Electricity. Vocational Education Curriculum Guide. Industrial and Technical Education.

ERIC Educational Resources Information Center

West Virginia State Vocational Curriculum Lab., Cedar Lakes.

This curriculum guide contains eight units that provide the basic curriculum components required to develop lesson plans for the electrical occupations/residential electricity curriculum. The guide is not intended to be a complete, self-contained curriculum, but instead provides the teacher with a number of informational items related to the…

Carpentry. Vocational Education Curriculum Guide. Industrial and Technical Education.

ERIC Educational Resources Information Center

West Virginia State Vocational Curriculum Lab., Cedar Lakes.

This curriculum guide contains 12 units that provide the basic curriculum components required to develop lesson plans for the carpentry curriculum. The guide is not intended to be a complete, self-contained curriculum, but instead provides the teacher with a number of informational items related to the learning outcomes and allows the teacher…

Military Curricula for Vocational & Technical Education. Basic Baker, 9-4.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

Both teacher and student materials are included for a bakery technology course designed to facilitate learning the fundamental duties required in a dining facility or centralized pastry shop. One of a number of military-developed curriculum packages selected for adaptation to vocational curriculum and instruction, the course consists of seventeen…

Industrial Equipment Maintenance. Vocational Education Curriculum Guide. Industrial and Technical Education.

ERIC Educational Resources Information Center

West Virginia State Vocational Curriculum Lab., Cedar Lakes.

This curriculum guide contains 10 units that provide the basic curriculum components required to develop lesson plans for the industrial equipment maintenance curriculum. The guide is not intended to be a complete, self-contained curriculum, but instead provides the teacher with a number of informational items related to the learning outcomes and…

Information transfer satellite concept study. Volume 2: Technical

NASA Technical Reports Server (NTRS)

Bergin, P.; Kincade, C.; Kurpiewski, D.; Leinhaupel, F.; Millican, F.; Onstad, R.

1971-01-01

The ITS concept study is preceded by two requirements studies whose primary objectives are to identify viable demands and to develop the functional requirements associated with these demands. In addition to continuing this basic activity the ITS concept study objectives are to: (1) develop tools and techniques for planning advanced information transfer satellite communications systems, and to (2) select viable systems for further analysis both in their near-term and in the far-term aspects.

The State of Space Propulsion Research

NASA Technical Reports Server (NTRS)

Sackheim, R. L.; Cole, J. W.; Litchford, R. J.

2006-01-01

The current state of space propulsion research is assessed from both a historical perspective, spanning the decades since Apollo, and a forward-looking perspective, as defined by the enabling technologies required for a meaningful and sustainable human and robotic exploration program over the forthcoming decades. Previous research and technology investment approaches are examined and a course of action suggested for obtaining a more balanced portfolio of basic and applied research. The central recommendation is the establishment of a robust national Space Propulsion Research Initiative that would run parallel with systems development and include basic research activities. The basic framework and technical approach for this proposed initiative are defined and a potential implementation approach is recommended.

Hubble Space Telescope cycle 5 call for proposals

NASA Technical Reports Server (NTRS)

Bond, Howard E. (Editor)

1994-01-01

This document invites and supports participation by the international astronomical community in the HST General Observer and Archival Research programs. These documents contain the basic procedural and technical information required for HST proposal preparation and submission, including applicable deadlines. The telescope and its instruments were built under the auspices of the NASA and the European Space Agency.

Machine Shop. Vocational Education Curriculum Guide. Industrial and Technical Education.

ERIC Educational Resources Information Center

West Virginia State Vocational Curriculum Lab., Cedar Lakes.

This curriculum guide contains nine units that provide the basic curriculum components required to develop lesson plans for the machine shop curriculum. The guide is not intended to be a complete, self-contained curriculum, but instead provides the teacher with a number of informational items related to the learning outcomes and allows the teacher…

Automotive Electrical and Electronic Systems I; Automotive Mechanics 2: 9045.03.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The automotive electrical and electronic system I course is designed as one of a group of quinmester courses offered in the field of automotive mechanics. General information will be given along with technical knowledge, basic skills, attitudes and values that are required for job entry level. The nine week (135 clock hour) course overcomes some…

Heating, Air Conditioning and Refrigeration. Vocational Education Curriculum Guide. Industrial and Technical Education.

ERIC Educational Resources Information Center

West Virginia State Vocational Curriculum Lab., Cedar Lakes.

This curriculum guide contains 17 units that provides the basic curriculum components required to develop lesson plans for the heating, air conditioning, and refrigeration curriculum. The guide is not intended to be a complete, self-contained curriculum, but instead provides the teacher with a number of informational items related to the learning…

Funding Your Education: The Guide to Federal Student Aid, 2012-13

ERIC Educational Resources Information Center

US Department of Education, 2011

2011-01-01

Every student, who meets some basic eligibility requirements, can get some type of financial aid regardless of age or family income. Federal student aid is a financial aid from the federal government to help a student pay for education expenses at an eligible college, technical school, vocational school, or graduate school. There are three…

Metal Trades Combined. Vocational Education Curriculum Guide. Industrial and Technical Education.

ERIC Educational Resources Information Center

West Virginia State Vocational Curriculum Lab., Cedar Lakes.

This curriculum guide contains nine units that provide the basic curriculum components required to develop lesson plans for the combined metal trades curriculum. This guide is not intended to be a complete, self-contained curriculum, but instead provides the teacher with a number of informational items related to the learning outcomes and allows…

The National Shipbuilding Research Program. Proceedings of the REAPS Technical Symposium held June 15-16, 1976 Atlanta, Georgia

DTIC Science & Technology

1976-06-01

the imformation needed to perform the design funct ions, but will also provide the user with the details required to interact with other individuals...several calls of basic drafting (DRA) macros. The deck heights are constant andincluded in the coding. Al - identifies the specific frame to be retrived

Optical coating in space

NASA Technical Reports Server (NTRS)

Bunner, A. N.

1983-01-01

A technological appraisal of the steps required to approach the goal of in-situ optical coating, cleaning and re-coating the optical elements of a remote telescope in space is reported. Emphasis is placed on the high ultraviolet throughput that a telescope using bare aluminum mirrors would offer. A preliminary design is suggested for an Orbital Coating Laboratory to answer basic technical questions.

Four Commandments for Writing Policies for Public-Access Wireless Networks

ERIC Educational Resources Information Center

Sauers, Michael

2006-01-01

In this article, the author describes what components should be included in a comprehensive policy for public wireless usage in a library. He lists four basic steps, which include: (1) Introduce the service; (2) List the technical requirements; (3) Spell out disclaimers on access, assistance, and liability; and (4) Alert users to security concerns.

System configuration management plan for 101-SY Hydrogen Mitigation Test Project Mini-Data Acquisition and Control System of Tank Waste Remediation System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vargo, G.F. Jr.

1994-10-11

The DOE Standard defines the configuration management program by the five basic program elements of ``program management,`` ``design requirements,`` ``document control,`` ``change control,`` and ``assessments,`` and the two adjunct recovery programs of ``design reconstitution,`` and ``material condition and aging management. The C-M model of five elements and two adjunct programs strengthen the necessary technical and administrative control to establish and maintain a consistent technical relationship among the requirements, physical configuration, and documentation. Although the DOE Standard was originally developed for the operational phase of nuclear facilities, this plan has the flexibility to be adapted and applied to all life-cycle phasesmore » of both nuclear and non-nuclear facilities. The configuration management criteria presented in this plan endorses the DOE Standard and has been tailored specifically to address the technical relationship of requirements, physical configuration, and documentation during the full life-cycle of the 101-SY Hydrogen Mitigation Test Project Mini-Data Acquisition and Control System of Tank Waste Remediation System.« less

Teaching Intercultural Communication in a Basic Technical Writing Course: A Survey of Our Current Practices and Methods

ERIC Educational Resources Information Center

Matveeva, Natalia

2008-01-01

This research article reports the results of an online survey distributed among technical writing instructors in 2006. The survey aimed to examine how we teach intercultural communication in basic technical writing courses: our current practices and methods. The article discusses three major challenges that instructors may face when teaching about…

Improving the Basic Skills of Vocational-Technical Students: An Administrator's Guide. Competency-Based Vocational Education Administrator Module Series.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This guide provides information and guidelines intended to assist vocational administrators in developing and evaluating programs to improve the basic skills of vocational-technical students. Part one provides background information about basic skills and examines their role in vocational education. Discussed next are various program types,…

Undergraduate basic surgical skills education: impact on attitudes to a career in surgery and surgical skills acquisition.

PubMed

McAnena, P F; O'Halloran, N; Moloney, B M; Courtney, D; Waldron, R M; Flaherty, G; Kerin, M J

2018-05-01

Basic surgical skills modules in medical education are effective in teaching skills and increasing confidence among students approaching surgery. However, these modules are not delivered universally and their effect on the professional development of graduates has not been established. We aimed to assess the impact of a 10-week basic surgical skills module on attitudes and technical skills of first year medical students compared to interns. Eighteen students participated and were assessed using a 4-part questionnaire. Technical skills were assessed by observing students perform a basic interrupted suture, using the objective structured assessment of technical skills (OSATS) tool. Fourteen interns were recruited. Students were more confident in surgical scrubbing (mean score 4.0 vs. 2.86, p = 0.001), and performing a basic suture (4.05 vs. 1.93, p = 0.000), more enthusiastic about assisting with an operation (4.5 vs. 3.0, p = 0.001) and more likely to consider a career in surgery (4.16 vs. 2.28, p = 0.000). Technical skills were greater in the student group (mean score 30.8 vs. 19.6, p = 0.001). Five interns had taken part in surgical skills modules as undergraduates. Their technical skills were significantly higher compared to interns who had not (n = 9) (28.8 vs. 14.5, p = 0.006), and they were more likely to consider a career in surgery (3.6 vs. 1.5, p = 0.036). The introduction of surgical skills teaching to the undergraduate medical curriculum has a positive impact on students' attitudes towards surgery and accelerates basic technical skills development. Consideration should be given to development of a standardised undergraduate core curriculum in basic surgical skills teaching.

Advanced composite elevator for Boeing 727 aircraft. Volume 1: Technical summary

NASA Technical Reports Server (NTRS)

Chovil, D. V.; Harvey, S. T.; Mccarty, J. E.; Desper, O. E.; Jamison, E. S.; Syder, H.

1981-01-01

The design, development, analysis, and testing activities and results that were required to produce five and one-half shipsets of advanced composite elevators for Boeing 727 aircraft are summarized. During the preliminary design period, alternative concepts were developed. After selection of the best design, detail design and basic configuration improvements were evaluated. Five and one-half shipsets were manufactured. All program goals (except competitive cost demonstration) were accomplished when our design met or exceeded all requirements, criteria, and objectives.

Automotive Mechanics as Applied to Auto Body; Auto Body Repair and Refinishing 3: 9037.02.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This is a course in which the student will receive the general information, technical knowledge, basic skills, attitudes, and values required for job entry level as an auto body repair helper. Course content includes general and specific goals, orientation, instruction in service tools and bench skills, and auto mechanics as applied to auto body.…

Military Curriculum Materials for Vocational and Technical Education. Masonry 3-4.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This independent, self-study course on masonry was developed from military sources for use in vocational education. The course provides basic instruction in the skills and knowledge required to enter the masonry trade. The course involves theory and is intended to be used with laboratory or on-the-job training. Some of the job skills included are…

External High School Diploma Program Evaluation Project. Final Report, October 1, 1979-June 30, 1980. Part III: Competency Comparison.

ERIC Educational Resources Information Center

Hole, Wanda Clements; Seggerson, Sharon Corcoran

The purpose of this portion of a project was to compare External High School Diploma (EHSDP) competencies at Waukesha County (Wisconsin) Technical Institute with minimum high school competency requirements in (1) local school districts and (2) selected states. Testing focused on basic skills of mathematics, reading, and writing. Minimum competency…

An Evaluation of the Employee Training and Development Process for Nicolet Area Technical College's Basic Education Program.

ERIC Educational Resources Information Center

Karl, Luis C.

The adult basic education (ABE) program at Nicolet Area Technical College (NATC) evaluated its training and development (T&D) process for new basic education instructors. The study gathered monitoring and screening criteria that addressed valuable components for use in an instrument for validating effectiveness of the ABE program (T&D)…

Supplementing Tribal Culture Using Technical Writing Basics

ERIC Educational Resources Information Center

Tichenor, Stuart

2008-01-01

Using technical writing basics, a cohort of Lighthorse Police Officers from the Muscogee (Creek) Nation added to their tribe's cultural history by recording part of their family and clan history as well as documenting their law enforcement careers and education.

NASA software documentation standard software engineering program

NASA Technical Reports Server (NTRS)

1991-01-01

The NASA Software Documentation Standard (hereinafter referred to as Standard) can be applied to the documentation of all NASA software. This Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. This basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

Framework for incorporating simulation into urology training.

PubMed

Arora, Sonal; Lamb, Benjamin; Undre, Shabnam; Kneebone, Roger; Darzi, Ara; Sevdalis, Nick

2011-03-01

• Changes to working hours, new technologies and increased accountability have rendered the need for alternative training environments for urologists. • Simulation offers a promising arena for learning to take place in a safe, realistic setting. • Despite its benefits, the incorporation of simulation into urological training programmes remains minimal. • The current status and future directions of simulation for training in technical and non-technical skills are reviewed as they pertain to urology. • A framework is presented for how simulation-based training could be incorporated into the entire urological curriculum. • The literature on simulation in technical and non-technical skills training is reviewed, with a specific focus upon urology. • To fully integrate simulation into a training curriculum, its possibilities for addressing all the competencies required by a urologist must be realized. • At an early stage of training, simulation has been used to develop basic technical skills and cognitive skills, such as decision-making and communication. • At an intermediate stage, the studies focus upon more advanced technical skills learnt with virtual reality simulators. • Non-technical skills training would include leadership and could be delivered with in situ models. • At the final stage, experienced trainees can practise technical and non-technical skills in full crisis simulations situated within a fully-simulated operating rooms. • Simulation can provide training in the technical and non-technical skills required to be a competent urologist. • The framework presented may guide how best to incorporate simulation into training curricula. • Future work should determine whether acquired skills transfer to clinical practice and improve patient care. © 2010 THE AUTHORS. BJU INTERNATIONAL © 2010 BJU INTERNATIONAL.

On I/O Virtualization Management

NASA Astrophysics Data System (ADS)

Danciu, Vitalian A.; Metzker, Martin G.

The quick adoption of virtualization technology in general and the advent of the Cloud business model entail new requirements on the structure and the configuration of back-end I/O systems. Several approaches to virtualization of I/O links are being introduced, which aim at implementing a more flexible I/O channel configuration without compromising performance. While previously the management of I/O devices could be limited to basic technical requirments (e.g. the establishment and termination of fixed-point links), the additional flexibility carries in its wake additional management requirements on the representation and control of I/O sub-systems.

Material for Point Design (final summary of DIME material)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bradley, Paul A.

2014-02-25

These slides summarize the motivation of the Defect Induced Mix Experiment (DIME) project, the “point design” of the Polar Direct Drive (PDD) version of the NIF separated reactant capsule, the experimental requirements, technical achievements, and some useful backup material. These slides are intended to provide much basic material in one convenient location and will hopefully be of some use for subsequent experimental projects.

Airborne electronics for automated flight systems

NASA Technical Reports Server (NTRS)

Graves, G. B., Jr.

1975-01-01

The increasing importance of airborne electronics for use in automated flight systems is briefly reviewed with attention to both basic aircraft control functions and flight management systems for operational use. The requirements for high levels of systems reliability are recognized. Design techniques are discussed and the areas of control systems, computing and communications are considered in terms of key technical problems and trends for their solution.

Configuration management plan for waste tank farms and the 242-A evaporator of tank waste remediation system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laney, T.

The configuration management architecture presented in this Configuration Management Plan is based on the functional model established by DOE-STD-1073-93, ``Guide for Operational Configuration Management Program.`` The DOE Standard defines the configuration management program by the five basic program elements of ``program management,`` ``design requirements,`` ``document control,`` ``change control,`` and ``assessments,`` and the two adjunct recovery programs of ``design reconstitution,`` and ``material condition and aging management.`` The CM model of five elements and two adjunct programs strengthen the necessary technical and administrative control to establish and maintain a consistent technical relationship among the requirements, physical configuration, and documentation. Although the DOEmore » Standard was originally developed for the operational phase of nuclear facilities, this plan has the flexibility to be adapted and applied to all life-cycle phases of both nuclear and non-nuclear facilities. The configuration management criteria presented in this plan endorses the DOE Standard and has been tailored specifically to address the technical relationship of requirements, physical configuration, and documentation during the full life cycle of the Waste Tank Farms and 242-A Evaporator of Tank Waste Remediation System.« less

DOE Fundamentals Handbook: Mathematics, Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-06-01

The Mathematics Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of mathematics and its application to facility operation. The handbook includes a review of introductory mathematics and the concepts and functional use of algebra, geometry, trigonometry, and calculus. Word problems, equations, calculations, and practical exercises that require the use of each of the mathematical concepts are also presented. This information will provide personnel with a foundation for understanding and performing basic mathematical calculations that are associated with various DOE nuclearmore » facility operations.« less

DOE Fundamentals Handbook: Mathematics, Volume 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-06-01

The Mathematics Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of mathematics and its application to facility operation. The handbook includes a review of introductory mathematics and the concepts and functional use of algebra, geometry, trigonometry, and calculus. Word problems, equations, calculations, and practical exercises that require the use of each of the mathematical concepts are also presented. This information will provide personnel with a foundation for understanding and performing basic mathematical calculations that are associated with various DOE nuclearmore » facility operations.« less

[Platforms are needed for innovative basic research in ophthalmology].

PubMed

Wang, Yi-qiang

2012-07-01

Basic research poses the cornerstone of technical innovation in all lines including medical sciences. Currently, there are shortages of professional scientists as well as technical supporting teams and facilities in the field of basic research of ophthalmology and visual science in China. Evaluation system and personnel policies are not supportive for innovative but high-risk-of-failure research projects. Discussion of reasons and possible solutions are given here to address these problems, aiming at promoting buildup of platforms hosting novel and important basic research in eye science in this country.

The paradox of managing a project-oriented matrix: establishing coherence within chaos.

PubMed

Greiner, L E; Schein, V E

1981-01-01

Projects that require the flexible coordination of multidisciplinary teams have tended to adopt a matrix structure to accomplish complex tasks. Yet these project-oriented matrix structures themselves require careful coordination if they are to realize the objectives set for them. The authors identify the basic organizational questions that project-oriented matrix organizations must face. They examine the relationship between responsibility and authority; the tradeoffs between economic efficiency and the technical quality of the work produced; and the sensitive issues of managing individualistic, highly trained professionals while also maintaining group cohesiveness.

Using Scientific and Industrial Films in Teaching Technical Communication.

ERIC Educational Resources Information Center

Veeder, Gerry

A film course especially designed for technical communication students can illustrate basic film concepts and techniques while showing how film effectively communicates ideas in an industrial and scientific communication system. After a basic introduction to film terms, the study of actual scientific and industrial films demonstrates the following…

How Expert Pilots Think Cognitive Processes in Expert Decision Making

DTIC Science & Technology

1993-02-01

Management (CRM) This document is available to the public Advanced Qualification Program (AQP) through the National Technical Information Cognitive Task Analysis (CTA...8217 Selecting realistic EDM scenarios with critical events and performing a cognitive task analysis of novice vs. expert decision making for these events...scenarios with critical events and performing a cognitive task analysis of novice vs. expert decision making for these events is a basic requirement for

The "basic" approach: a single-centre experience with a cost-reducing model for paediatric cardiac extracorporeal membrane oxygenation.

PubMed

Padalino, Massimo A; Tessari, Chiara; Guariento, Alvise; Frigo, Anna C; Vida, Vladimiro L; Marcolongo, Andrea; Zanella, Fabio; Harvey, Michael J; Thiagarajan, Ravi R; Stellin, Giovanni

2017-04-01

Extracorporeal membrane oxygenation (ECMO) is a lifesaving but expensive therapy in terms of financial, technical and human resources. We report our experience with a 'basic' ECMO support model, consisting of ECMO initiated and managed without the constant presence of a bedside specialist, to assess safety, clinical outcomes and financial impact on our health system. We did a retrospective single-centre study of paediatric cardiac ECMO between January 2001 and March 2014. Outcomes included postimplant complications and survival at weaning and at discharge. We used activity based costing to compare the costs of current basic ECMO with those of a 'full optional' dedicated ECMO team (hypothesis 1); ECMO with a bedside nurse and perfusionist (hypothesis 2), and ECMO with a bedside perfusionist (hypothesis 3). Basic cardiac ECMO was required for 121 patients (median age 75 days, median weight 4.4 kg). A total of 107 patients (88%) had congenital heart disease; 37 had univentricular physiology. The median duration of ECMO was 7 days (interquartile range [IQR], 4-15 days). Overall survival at weaning and at 30 days in the neonatal and paediatric age groups was 58.6% and 30.6%, respectively; these results were not significantly different from Extracorporeal Life Support Organization data. Cost analysis revealed a saving of €30 366, €22 144 and €13 837 for each patient on basic ECMO for hypotheses 1, 2 and 3, respectively. Despite reduced human, technical and economical resources, a basic ECMO model without a bedside specialist was associated with satisfactory survival and lower costs. © The Author 2017. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

An MBSE Approach to Space Suit Development

NASA Technical Reports Server (NTRS)

Cordova, Lauren; Kovich, Christine; Sargusingh, Miriam

2012-01-01

The EVA/Space Suit Development Office (ESSD) Systems Engineering and Integration (SE&I) team has utilized MBSE in multiple programs. After developing operational and architectural models, the MBSE framework was expanded to link the requirements space to the system models through functional analysis and interfaces definitions. By documenting all the connections within the technical baseline, ESSD experienced significant efficiency improvements in analysis and identification of change impacts. One of the biggest challenges presented to the MBSE structure was a program transition and restructuring effort, which was completed successfully in 4 months culminating in the approval of a new EVA Technical Baseline. During this time three requirements sets spanning multiple DRMs were streamlined into one NASA-owned Systems Requirement Document (SRD) that successfully identified requirements relevant to the current hardware development effort while remaining extensible to support future hardware developments. A capability-based hierarchy was established to provide a more flexible framework for future space suit development that can support multiple programs with minimal rework of basic EVA/Space Suit requirements. This MBSE approach was most recently applied for generation of an EMU Demonstrator technical baseline being developed for an ISS DTO. The relatively quick turnaround of operational concepts, architecture definition, and requirements for this new suit development has allowed us to test and evolve the MBSE process and framework in an extremely different setting while still offering extensibility and traceability throughout ESSD projects. The ESSD MBSE framework continues to be evolved in order to support integration of all products associated with the SE&I engine.

Wearable devices for blood purification: principles, miniaturization, and technical challenges.

PubMed

Armignacco, Paolo; Lorenzin, Anna; Neri, Mauro; Nalesso, Federico; Garzotto, Francesco; Ronco, Claudio

2015-01-01

The prevalences of end-stage renal disease (ESRD) and renal replacement therapy (RRT) continue to increase across the world imposing staggering costs on providers. Therefore, strategies to optimize the treatment and improve survival are of fundamental importance. Despite the benefits of daily dialysis, its implementation is difficult and wearable hemodialysis might represent an alternative by which frequent treatments can be delivered to ESRD patients with much less interference in their routines promoting better quality of life. The development of the wearable artificial kidney (WAK) requires incorporation of basic components of a dialysis system into a wearable device that allows mobility, miniaturization, and above all, patient-oriented management. The technical requirements necessary for WAK can be divided into the following broad categories: dialysis membranes, dialysis regeneration, vascular access, patient monitoring systems, and power sources. Pumping systems for blood and other fluids are the most critical components of the entire device. © 2015 Wiley Periodicals, Inc.

Basic Skills Assessment Program. Technical Report.

ERIC Educational Resources Information Center

Los Angeles County Superintendent of Schools, CA.

This is the second technical report on the Basic Skills Assessment Program for the Department of Defense Dependents Schools (DoDDS). The report includes a summary of 1979-80 testing activities organized into five chapters. The first chapter provides an overview of report contents and a brief history of the testing program. The second chapter…

Cluster: Drafting. Course: Basic Technical Drafting. Research Project.

ERIC Educational Resources Information Center

Sanford - Lee County Schools, NC.

The set of six units is designed for use with an instructor in basic technical drafting and is also keyed to other texts. Each unit contains several task packages specifying prerequisites, rationale for learning, objectives, learning activities to be supervised by the instructor, and learning practice. The units cover: pictorial drawing; screw…

Integrated Basic Education and Skills Training (I-BEST). Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2014

2014-01-01

Washington's Integrated Basic Education and Skills Training Program (I-BEST) quickly teaches students literacy, work, and college-readiness skills so they can move through school and into living wage jobs faster. Pioneered by Washington's community and technical colleges, I-BEST uses a team-teaching approach to combine college-readiness classes…

An Analysis of Contracting Officer Technical Representative Training Requirements.

DTIC Science & Technology

1982-06-01

AI and contract law . On the basis of the perceived need to eliminate superflu- ous material from the training of CA contract representatives and...Cost and pricing principles 3. Basic contract law 4. Types of contracts S. Definition of important terms 6. Understanding the terms and conditions--how...digesting and/or deletions to coincide with the learning objectives developed in Chapter III include: 1. Federal Acquisition Policy 2. Contract Law 3

Mentoring SFRM: A New Approach to International Space Station Flight Control Training

NASA Technical Reports Server (NTRS)

Huning, Therese; Barshi, Immanuel; Schmidt, Lacey

2009-01-01

The Mission Operations Directorate (MOD) of the Johnson Space Center is responsible for providing continuous operations support for the International Space Station (ISS). Operations support requires flight controllers who are skilled in team performance as well as the technical operations of the ISS. Space Flight Resource Management (SFRM), a NASA adapted variant of Crew Resource Management (CRM), is the competency model used in the MOD. ISS flight controller certification has evolved to include a balanced focus on development of SFRM and technical expertise. The latest challenge the MOD faces is how to certify an ISS flight controller (Operator) to a basic level of effectiveness in 1 year. SFRM training uses a twopronged approach to expediting operator certification: 1) imbed SFRM skills training into all Operator technical training and 2) use senior flight controllers as mentors. This paper focuses on how the MOD uses senior flight controllers as mentors to train SFRM skills.

Normalization of hydrocarbon emissions in Germany

NASA Astrophysics Data System (ADS)

Levitin, R. E.

2018-05-01

In connection with the integration of the Russian Federation into the European space, many technical regulations and methodologies are being corrected. The work deals with the German legislation in the field of determining of hydrocarbon emissions and the methodology for determining the emissions of oil products from vertical steel tanks. In German law, the Emission Protection Act establishes only basic requirements. Mainly technical details, which have importance for practice, are regulated in numerous Orders on the Procedure for the Implementation of the Law (German abbr. - BimSchV). Documents referred to by the Technical Manual on the Maintenance of Clean Air are a step below on the hierarchical ladder of legislative and regulatory documentation. This set of documents is represented by numerous DIN standards and VDI guidelines. The article considers the methodology from the guidance document VDI 3479. The shortcomings and problems of applying the given method in Russia are shown.

Adapting Project Management Practices to Research-Based Projects

NASA Technical Reports Server (NTRS)

Bahr, P.; Baker, T.; Corbin, B.; Keith, L.; Loerch, L.; Mullenax, C.; Myers, R.; Rhodes, B.; Skytland, N.

2007-01-01

From dealing with the inherent uncertainties in outcomes of scientific research to the lack of applicability of current NASA Procedural Requirements guidance documentation, research-based projects present challenges that require unique application of classical project management techniques. If additionally challenged by the creation of a new program transitioning from basic to applied research in a technical environment often unfamiliar with the cost and schedule constraints addressed by project management practices, such projects can find themselves struggling throughout their life cycles. Finally, supplying deliverables to a prime vehicle customer, also in the formative stage, adds further complexity to the development and management of research-based projects. The Biomedical Research and Countermeasures Projects Branch at NASA Johnson Space Center encompasses several diverse applied research-based or research-enabling projects within the newly-formed Human Research Program. This presentation will provide a brief overview of the organizational structure and environment in which these projects operate and how the projects coordinate to address and manage technical requirements. We will identify several of the challenges (cost, technical, schedule, and personnel) encountered by projects across the Branch, present case reports of actions taken and techniques implemented to deal with these challenges, and then close the session with an open forum discussion of remaining challenges and potential mitigations.

[Technical specification for clinical application of critical ultrasonography].

PubMed

Yin, M G; Wang, X T; Liu, D W; Chao, Y G; Guan, X D; Kang, Y; Yan, J; Ma, X C; Tang, Y Q; Hu, Z J; Yu, K J; Chen, D C; Ai, Y H; Zhang, L N; Zhang, H M; Wu, J; Liu, L X; Zhu, R; He, W; Zhang, Q; Ding, X; Li, L; Li, Y; Liu, H T; Zeng, Q B; Si, X; Chen, H; Zhang, J W; Xu, Q H; Chen, W J; Chen, X K; Huang, D Z; Cai, S H; Shang, X L; Guan, J; Du, J; Zhao, L; Wang, M J; Cui, S; Wang, X M; Zhou, R; Zeng, X Y; Wang, Y P; Lyu, L W; Zhu, W H; Zhu, Y; Duan, J; Yang, J; Yang, H

2018-06-01

Critical ultrasonography(CUS) is different from the traditional diagnostic ultrasound, the examiner and interpreter of the image are critical care medicine physicians. The core content of CUS is to evaluate the pathophysiological changes of organs and systems and etiology changes. With the idea of critical care medicine as the soul, it can integrate the above information and clinical information, bedside real-time diagnosis and titration treatment, and evaluate the therapeutic effect so as to improve the outcome. CUS is a traditional technique which is applied as a new application method. The consensus of experts on critical ultrasonography in China released in 2016 put forward consensus suggestions on the concept, implementation and application of CUS. It should be further emphasized that the accurate and objective assessment and implementation of CUS requires the standardization of ultrasound image acquisition and the need to establish a CUS procedure. At the same time, the standardized training for CUS accepted by critical care medicine physicians requires the application of technical specifications, and the establishment of technical specifications is the basis for the quality control and continuous improvement of CUS. Chinese Critical Ultrasound Study Group and Critical Hemodynamic Therapy Collabration Group, based on the rich experience of clinical practice in critical care and research, combined with the essence of CUS, to learn the traditional ultrasonic essence, established the clinical application technical specifications of CUS, including in five parts: basic view and relevant indicators to obtain in CUS; basic norms for viscera organ assessment and special assessment; standardized processes and systematic inspection programs; examples of CUS applications; CUS training and the application of qualification certification. The establishment of applied technology standard is helpful for standardized training and clinical correct implementation. It is helpful for clinical evaluation and correct guidance treatment, and is also helpful for quality control and continuous improvement of CUS application.

Promoting Gender Parity in Basic Education: Lessons from a Technical Cooperation Project in Yemen

ERIC Educational Resources Information Center

Yuki, Takako; Mizuno, Keiko; Ogawa, Keiichi; Mihoko, Sakai

2013-01-01

Many girls are not sent to school in Yemen, despite basic education being free as well as compulsory for all children aged 6-15. Aiming to improve girls' enrollment by increasing parental and community involvement, the Japan International Cooperation Agency (JICA) offered a technical cooperation project in June 2005 called Broadening Regional…

Sociometric Clique Identification. Final Report.

ERIC Educational Resources Information Center

Kadushin, Charles

This report consists of four parts. The first part is a non-technical summary of the basic problem and an attempted solution. The second part is a technical review of the literature and a description of the basic algorithm used in the solution. The third part describes the use of the Sociogram System. The fourth part describes the use of CHAIN, a…

Relevance in Basic Composition: Writing Assignments for Technical Students.

ERIC Educational Resources Information Center

Tichenor, Stuart

Generally, students in vocational and technical colleges are in writing classes because they must be, not because they want to be. As a rule, students in basic composition classes have been more or less continually exposed to writing classes since middle school where they been asked to keep journals, read articles and short stories, and write…

Training the Technical Editor.

ERIC Educational Resources Information Center

Cathcart, Margaret E.

The demand for skilled technical editors is growing as society places increasing emphasis on receiving accurate, concise, and complete technical data. Since many organizations do not have inhouse programs for training technical editors, a need exists to provide inexperienced people with basic editing skills. One organization has developed two…

Tug fleet and ground operations schedules and controls. Volume 2: part 1

NASA Technical Reports Server (NTRS)

1975-01-01

This Tug Fleet and Ground Operations Schedules and Controls Study addresses both ground operational data and technical requirements that span the Tug planning phase and operations phase. A similar study covering mission operations (by others) provides the complimentary flight operations details. The two studies provide the planning data requirements, resource allocation, and control milestones for supporting the requirements of the STS program. This Tug Fleet and Ground Operations Schedules and Controls Study incorporates the basic ground operations requirements and concepts provided by previous studies with the interrelationships of the planning, IUS transition, and Tug fleet operations phases. The interrelationships of these phases were studied as a system to optimize overall program benefits and minimize operational risk factors.

Basic Microsurgery Training Using the Laboratory Rat (Rattus norvegicus)

DTIC Science & Technology

2018-03-01

all information . Use additional pages if necessary.) PROTOCOL #: FDG20170016A DATE: 1 March 2018 PROTOCOL TITLE: “Basic Microsurgery Training...2018__ RYAN M. DIEPENBROCK, Lt Col, USAF, DC (Date) 3 FDG20170016A Attachments: Attachment 1: Defense Technical Information Center (DTIC) Abstract...Submission Attachment 1 Defense Technical Information Center (DTIC) Abstract Submission Objectives: The purpose of this course is to

The Environment Friendly Power Source for Power Supply of Mobile Communication Base Stations

NASA Astrophysics Data System (ADS)

Rudenko, N. V.; Ershov, V. V.; Evstafiev, V. V.

2017-05-01

The article describes the technical proposals to improve environmental and resource characteristics of the autonomous power supply systems of mobile communication base stations based on renewable energy sources, while ensuring the required reliability and security of power supply. These include: the replacement of diesel-generator with clean energy source - an electrochemical generator based on hydrogen fuel cells; the use of wind turbines with a vertical axis; use of specialized batteries. Based on the analysis of the know technical solutions, the structural circuit diagram of the hybrid solar-wind-hydrogen power plant and the basic principles of the algorithm of its work were proposed. The implementation of these proposals will improve the environmental and resource characteristics.

Multicentre analysis of treatment planning information: technical requirements, possible applications and a proposal.

PubMed

Ebert, M A; Blight, J; Price, S; Haworth, A; Hamilton, C; Cornes, D; Joseph, D J

2004-09-01

Digital data from 3-D treatment planning computers is generally used for patient planning and then never considered again. However, such data contains enormous quantities of information regarding patient geometries, tissue outlining, treatment approaches and dose distributions. Were such data accessible from planning systems from multiple manufacturers, there would be substantial opportunities for undertaking quality assurance of radiotherapy clinical trials, prospective assessment of trial outcomes and basic treatment planning research and development. The technicalities of data exchange between planning systems are outlined, and previous attempts at producing systems capable of viewing and/or manipulating imaging and radiotherapy digital data reviewed. Development of a software system for enhancing the quality of Australasian clinical trials is proposed.

Chemical Research Projects Office: Functions, accomplishments, and programs

NASA Technical Reports Server (NTRS)

Kourtides, D. A.; Parker, J. A.

1972-01-01

The purpose, technical accomplishments, and related activities of the Chemical Research Project Group are outlined. Data cover efforts made to: (1) identify chemical research and technology required for solutions to problems of national urgency, synchronous with aeronautics and space effort; (2) conduct basic and applied interdisciplinary research on chemical problems in the areas of macromolecular science and fire research, and (3) provide productive liason with the engineering community and effective transfer of technology to other agencies and industry.

Naval Training Device Center Index of Technical Reports.

ERIC Educational Resources Information Center

Walker, Lemuel E.

Published Naval Training Device Center technical reports and some technical notes (those available through the Defense Documentation Center-DDC) which have resulted from basic research, exploratory development, and advanced development type projects are listed. The reports are indexed by technical note number, by title, and by contractor code. The…

Basic Machines - The "Nuts and Bolts" of Technical Physics Minicourse, Career Oriented Pre-Technical Physics. Preliminary Edition.

ERIC Educational Resources Information Center

Bullock, Bob; And Others

This minicourse was prepared for use with secondary physics students in the Dallas Independent School District and is one option in a physics program which provides for the selection of topics on the basis of student career needs and interests. This minicourse was aimed at two levels in the study of basic machines. The "light" level…

Expansion Policy of Secondary Technical Education as a Correlate to the Acquisition of Basic Technical Skills by Students in Cameroon

ERIC Educational Resources Information Center

Efande, Lyonga John

2015-01-01

This study aims at investigating the relationship between the expansion of secondary Technical Education on the acquisition of technical skills by students. Technical Vocational Education and Training (TVET) has been expanding quantitatively yearly without paying enough attention to its adverse effect on quality and the acquisition of the…

Digital imaging technology assessment: Digital document storage project

NASA Technical Reports Server (NTRS)

1989-01-01

An ongoing technical assessment and requirements definition project is examining the potential role of digital imaging technology at NASA's STI facility. The focus is on the basic components of imaging technology in today's marketplace as well as the components anticipated in the near future. Presented is a requirement specification for a prototype project, an initial examination of current image processing at the STI facility, and an initial summary of image processing projects at other sites. Operational imaging systems incorporate scanners, optical storage, high resolution monitors, processing nodes, magnetic storage, jukeboxes, specialized boards, optical character recognition gear, pixel addressable printers, communications, and complex software processes.

Requirement for a standard language for test and ground operations

NASA Technical Reports Server (NTRS)

Medlock, J. R.

1971-01-01

The basic requirements for a standard test and checkout language applicable to all phases of the space shuttle test and ground operations are determined. The general characteristics outlined here represent the integration of selected ideas and concepts from operational elements within Kennedy Space Center (KSC) that represent diverse disciplines associated with space vehicle testing and launching operations. Special reference is made to two studies conducted in this area for KSC as authorized by the Advanced Development Element of the Office of Manned Space Flight (MSF). Information contained in reports from these studies have contributed significantly to the final selection of language features depicted in this technical report.

Development of mining guidance and control systems

NASA Technical Reports Server (NTRS)

1979-01-01

New fundamental interface sensor concepts were identified and investigated including tabulation of the physical and performance characteristics of two new interface detector concepts: - natural background radiation and magnetic spin resonance. Studies of guidance and control techniques for the longwall miner identified three basic systems for use in automated/remote controlled longwall mining. The following projects were initiated: system study which will more completely define the longwall guidance and control system design concepts; integration of the various control functions (vertical, yaw, and roll); and hardware technical requirements.

Harnessing Novel Secreted Inhibitors of EGF Receptor Signaling for Breast Cancer Treatment

DTIC Science & Technology

2007-04-01

the original proposal, we described approaches for displaying the basic Argos and Dkk scaffolds as pIII fusions on M13 phage , so that we could...deal of effort into displaying Argos and other relevant proteins as pIII fusions on M13 phage (Task 2a). This has been technically very challenging... display function Argos on the surface of phage M13 , requiring a change in experimental strategy • To replace the phage display , we have established

Performance Limiting Flow Processes in High-State Loading High-Mach Number Compressors

DTIC Science & Technology

2008-03-13

the Doctoral Thesis Committee of the doctoral student. 3 3.0 Technical Background A strong incentive exists to reduce airfoil count in aircraft engine ...Advanced Turbine Engine ). A basic constraint on blade reduction is seen from the Euler turbine equation, which shows that, although a design can be carried...on the vane to rotor blade ratio of 8:11). Within the MSU Turbo code, specifying a small number of time steps requires more iteration at each time

Relevant Optical Issues of the SPM-Twin Telescopes

NASA Astrophysics Data System (ADS)

González, J. J.; Orlov, V.

2007-06-01

Most technical aspects of the SPM-Twin Telescopes have been basically solved by the Magellan and MMT projects. However, the Spectroscopic "Wide Field Telescope" will be the first of its kind and an optical solution based on Magellan needs to be further investigated. In addition, the requirements for adaptive optics for the Standard Field Telescope need to be worked out. In this contribution we will compare optical wide field conceptual designs and the potential scope of AO for SPM-Twin.

Federal Logistics Information System (FLIS) Procedures Manual. Volume 3. Development and Maintenance of Item Logistics Data Tools.

DTIC Science & Technology

1995-01-01

Act and Regulations of Food Safety and index number or a foreign prototype number shall Inspection Service, USDA. consist of the basic name Dye followed...DYE, INDATHRENE BLUE GCD (c) In order to comply with USDA labeling DYE, PONTACYLE CARMINE requirements for meat and poultry food products, the 2B number...name actions will include a written justification which supports baker’ cthe request technically and procedurally. DLER’ S See CAP, FOOD See FIIG

SArdinia Roach2-based Digital Architecture for Radio Astronomy (SARDARA)

NASA Astrophysics Data System (ADS)

Melis, A.; Concu, R.; Trois, A.; Possenti, A.; Bocchinu, A.; Bolli, P.; Burgay, M.; Carretti, E.; Castangia, P.; Casu, S.; Pestellini, C. Cecchi; Corongiu, A.; D’Amico, N.; Egron, E.; Govoni, F.; Iacolina, M. N.; Murgia, M.; Pellizzoni, A.; Perrodin, D.; Pilia, M.; Pisanu, T.; Poddighe, A.; Poppi, S.; Porceddu, I.; Tarchi, A.; Vacca, V.; Aresu, G.; Bachetti, M.; Barbaro, M.; Casula, A.; Ladu, A.; Leurini, S.; Loi, F.; Loru, S.; Marongiu, P.; Maxia, P.; Mazzarella, G.; Migoni, C.; Montisci, G.; Valente, G.; Vargiu, G.

The Sardinia Radio Telescope (SRT) is a 64-m, fully-steerable single-dish radio telescope that was recently commissioned both technically and scientifically with regard to the basic observing modes. In order to improve the scientific capability and cover all the requirements for an advanced single-dish radio telescope, we developed the SArdinia Roach2-based Digital Architecture for Radio Astronomy (SARDARA), a wide-band, multi-feed, general-purpose, and reconfigurable digital platform, whose preliminary setup was used in the early science program of the SRT in 2016. In this paper, we describe the backend both in terms of its scientific motivation and technical design, how it has been interfaced with the telescope environment during its development and, finally, its scientific commissioning in different observing modes with single-feed receivers.

Technical Preparation: Preparing Students for Success. A Position Paper Presented by the Wisconsin Association of Secondary Vocational Administrators 1991-1992.

ERIC Educational Resources Information Center

Peterson, Charlene; And Others

Technical Preparation (Tech Prep) programs include basic skills and competencies to improve students' school-to-work transition. The following elements characterize Tech Prep: designed for grades 9-14, leading to an technical associate degree; parallels college preparatory program; offers technical program of study in business enterprise,…

Technical Mathematics: Restructure of Technical Mathematics.

ERIC Educational Resources Information Center

Flannery, Carol A.

Designed to accompany a series of videotapes, this textbook provides information, examples, problems, and solutions relating to mathematics and its applications in technical fields. Chapter I deals with basic arithmetic, providing information on fractions, decimals, ratios, proportions, percentages, and order of operations. Chapter II focuses on…

The importance of defining technical issues in interagency environmental negotiations

USGS Publications Warehouse

Lamb, B.L.; Burkardt, N.; Taylor, J.G.

2001-01-01

The role of technical clarity in successful multiparty negotiations was studied. Investigations involved in-depth interviews with the principal participants in six consultations conducted under the U.S. Federal Energy Regulatory Commission’s hydroelectric power project licensing procedures. Technical clarity was especially important in these cases because they concerned science-based questions. The principal issues in the six cases were fish passage, instream flow for fish habitat, and entrainment of fish in hydropower turbines. It was concluded that technical clarity was one of the most critical elements in resolving these conflicts. In the least successful negotiations, parties failed to address the basic values of the dispute before plunging into technical studies. The results of those studies usually highlighted the potential for negative outcomes and increased polarization between the participants. In the most successful negotiations, the various parties shared an understanding of each of their basic values. These shared understandings led to technical studies that cast the negotiation in a positive light and illuminated possible solutions.

Basic targeting strategies for rendezvous and flyby missions to the near-Earth asteroids

NASA Astrophysics Data System (ADS)

Perozzi, Ettore; Rossi, Alessandro; Valsecchi, Giovanni B.

2001-01-01

Missions to asteroids and comets are becoming increasingly feasible both from a technical and a financial point of view. In particular, those directed towards the Near-Earth Asteroids have proven suitable for a low-cost approach, thus attracting the major space agencies as well as private companies. The choice of a suitable target involves both scientific relevance and mission design considerations, being often a difficult task to accomplish due to the limited energy budget at disposal. The aim of this paper is to provide an approach to basic trajectory design which allows to account for both aspects of the problem, taking into account scientific and technical information. A global characterization of the Near-Earth Asteroids population carried out on the basis of their dynamics, physical properties and flight dynamics considerations, allows to identify a group of candidates which satisfy both, the scientific and engineering requirements. The feasibility of rendezvous and flyby missions towards them is then discussed and the possibility of repeated encounters with the same object is investigated, as an intermediate scenario. Within this framework, the capability of present and near future launch and propulsion systems for interplanetary missions is also addressed.

Rote Learning in the Age of Technology: A Quantitative Study of a Career and Technical High School and the Practical Use of Basic Skills

ERIC Educational Resources Information Center

Cotreau Berube, Elyse A.

2011-01-01

The purpose of this quantitative research study was to investigate the use of rote learning in basic skills of mathematics and spelling of 12 high school students, from a career and technical high school, in an effort to learn if the pedagogy of rote fits in the frameworks of today's education. The study compared the accuracy of…

Low Cost Technical Solutions to Jump Start an Insider Threat Program

DTIC Science & Technology

2016-05-11

Low Cost Technical Solutions to Jump Start an Insider Threat Program George J. Silowash Derrick L. Spooner Daniel L. Costa Michael J...Albrethsen May 2016 TECHNICAL NOTE CMU/SEI-2016-TN-004 CERT Division http://www.sei.cmu.edu Copyright 2016 Carnegie Mellon University This... technical note will explore tools that may be suitable for satisfying the basic technical needs of an insider threat program, giving organizations a

Basic Writing Concepts for Scientists and Engineers.

ERIC Educational Resources Information Center

Mitchell, John H.

1980-01-01

Notes the differences between poetry and technical communication. Charges English teacher/humanists with confusing students about emotional writing, style, and effective technical communication. Offers five concepts that technical writing teachers can use to place "style" on a rational basis and to make students understand the true purposes of…

30 CFR 750.25 - Permit fees.

Code of Federal Regulations, 2010 CFR

2010-07-01

... review fee with the permit application. (2) Technical review. Following receipt from OSM of a notice of administrative completeness, an applicant who pays by stage of review shall submit the technical review basic fee... area. (3) Permit issuance. Following receipt from OSM of a notice of technical adequacy, an applicant...

Technical Writing Tips

ERIC Educational Resources Information Center

Kennedy, Patrick M.

2004-01-01

The main reason engineers, technicians, and programmers write poor technical documents is because they have had little training or experience in that area. This article addresses some of the basics that students can use to master technical writing tasks. The article covers the most common problems writers make and offers suggestions for improving…

The importance of comprehensive agricultural education in land-grant institutions: a historical perspective.

PubMed

Grant, P M; Field, T G; Green, R D; Rollin, B E

2000-06-01

Any thorough examination of the present and future of agricultural education must certainly begin with a look into its past. Since the creation of the United States, many leading American philosophers have viewed a strong agrarian culture as the bedrock of American vigor. These same philosophers repeatedly noted the significance of comprehensive agricultural education to a nation rich in agricultural wealth. The signing of the Agricultural Colleges Act legitimized the concept of formal education in the agricultural sciences and provided funding for such education. The Act, which came to be known as the Morrill Act, after one of its primary authors, stressed the importance of comprehensive education. In fact, the inclusion of liberal studies was specifically mentioned in the Morrill Act and was defended repeatedly by Morrill himself. Comprehensive education prevented graduating technically trained students who were lacking in the basic outcomes of education--critical, comprehensive problem solving, cohesive thought, and effective communication. However, throughout history, the demands of a growing population coupled with rapid advancements in scientific knowledge led to a gradual move away from comprehensive education in agricultural sciences toward increasing specialization, resulting in more narrowly trained students. Today's agricultural students are technically well versed but often lack the skill and knowledge required for cohesive thought and critical problem solving. Addressing the multitude of challenges facing leaders in the future of agriculture requires much more than technical skill. These challenges require quick, yet careful thinkers and communicators who can respond to changing market structure and consumer demand in a dynamic way. Students who are a product of a conscious move toward amalgamation of burgeoning scientific knowledge and technical prowess with an integrative education emphasizing relationships between disciplines would better serve tomorrow's agriculture.

Supplementary steam - A viable hydrogen power generation concept

NASA Technical Reports Server (NTRS)

Wright, D. E.; Lee, J. C.

1979-01-01

Technical and economic aspects of a supplementary steam generation for peaking power applications are discussed. Preliminary designs of the hydrogen/oxygen combustors to be used for such applications are described. The integration of the hydrogen/oxygen steam-generating equipment into a typical coal-fired steam station is studied. The basic steam generation system was designed as a 20 MW supplementary system to be added to the existing 160 MW system. An analysis of the operating and design requirements of the supplementary system is conducted. Estimates were made for additional steam and fuel supply lines and for additional control required to operate the combustors and to integrate the combustor system into the facility.

NASA Software Documentation Standard

NASA Technical Reports Server (NTRS)

1991-01-01

The NASA Software Documentation Standard (hereinafter referred to as "Standard") is designed to support the documentation of all software developed for NASA; its goal is to provide a framework and model for recording the essential information needed throughout the development life cycle and maintenance of a software system. The NASA Software Documentation Standard can be applied to the documentation of all NASA software. The Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. The basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

Concepts, requirements, and design approaches for building successful planning and scheduling systems

NASA Technical Reports Server (NTRS)

Hornstein, Rhoda Shaller; Willoughby, John K.

1991-01-01

Traditional practice of systems engineering management assumes requirements can be precisely determined and unambiguously defined prior to system design and implementation; practice further assumes requirements are held static during implementation. Human-computer decision support systems for service planning and scheduling applications do not conform well to these assumptions. Adaptation to the traditional practice of systems engineering management are required. Basic technology exists to support these adaptations. Additional innovations must be encouraged and nutured. Continued partnership between the programmatic and technical perspective assures proper balance of the impossible with the possible. Past problems have the following origins: not recognizing the unusual and perverse nature of the requirements for planning and scheduling; not recognizing the best starting point assumptions for the design; not understanding the type of system that being built; and not understanding the design consequences of the operations concept selected.

Systems for deep brain stimulation: review of technical features.

PubMed

Amon, A; Alesch, F

2017-09-01

The use of deep brain stimulation (DBS) is an important treatment option for movement disorders and other medical conditions. Today, three major manufacturers provide implantable systems for DBS. Although the underlying principle is basically the same for all available systems, the differences in the technical features vary considerably. This article outlines aspects regarding the technical features of DBS systems. The differences between voltage and current sources are addressed and their effect on stimulation is shown. To maintain clinical benefit and minimize side effects the stimulation field has to be adapted to the requirements of the patient. Shaping of the stimulation field can be achieved by the electrode design and polarity configuration. Furthermore, the electric signal consisting of stimulation rate, stimulation amplitude and pulse width affect the stimulation field. Interleaving stimulation is an additional concept, which permits improved treatment outcomes. Therefore, the electrode design, the polarity, the electric signal, and the concept of interleaving stimulation are presented. The investigated systems can be also categorized as rechargeable and non-rechargeable, which is briefly discussed. Options for interconnecting different system components from various manufacturers are presented. The present paper summarizes the technical features and their combination possibilities, which can have a major impact on the therapeutic effect.

The DOE Bioenergy Research Centers: History, Operations, and Scientific Output

DOE PAGES

Slater, Steven C.; Simmons, Blake A.; Rogers, Tamara S.; ...

2015-08-20

Over the past 7 years, the US Department of Energy's Office of Biological and Environmental Research has funded three Bioenergy Research Centers (BRCs). These centers have developed complementary and collaborative research portfolios that address the key technical and economic challenges in biofuel production from lignocellulosic biomass. All three centers have established a close, productive relationship with DOE's Joint Genome Institute (JGI). This special issue of Bioenergy Research samples the breadth of basic science and engineering work required to underpin a diverse, sustainable, and robust biofuel industry. In this report, which was collaboratively produced by all three BRCs, we discuss themore » BRC contributions over their first 7 years to the development of renewable transportation fuels. In additon, we also highlight the BRC research published in the current issue and discuss technical challenges in light of recent progress.« less

Evolution of Quality Assurance for Clinical Immunohistochemistry in the Era of Precision Medicine. Part 3: Technical Validation of Immunohistochemistry (IHC) Assays in Clinical IHC Laboratories.

PubMed

Torlakovic, Emina E; Cheung, Carol C; D'Arrigo, Corrado; Dietel, Manfred; Francis, Glenn D; Gilks, C Blake; Hall, Jacqueline A; Hornick, Jason L; Ibrahim, Merdol; Marchetti, Antonio; Miller, Keith; van Krieken, J Han; Nielsen, Soren; Swanson, Paul E; Vyberg, Mogens; Zhou, Xiaoge; Taylor, Clive R

2017-03-01

Validation of immunohistochemistry (IHC) assays is a subject that is of great importance to clinical practice as well as basic research and clinical trials. When applied to clinical practice and focused on patient safety, validation of IHC assays creates objective evidence that IHC assays used for patient care are "fit-for-purpose." Validation of IHC assays needs to be properly informed by and modeled to assess the purpose of the IHC assay, which will further determine what sphere of validation is required, as well as the scope, type, and tier of technical validation. These concepts will be defined in this review, part 3 of the 4-part series "Evolution of Quality Assurance for Clinical Immunohistochemistry in the Era of Precision Medicine."

Advanced Life Support Systems

NASA Technical Reports Server (NTRS)

Barta, Daniel J.

2004-01-01

This presentation is planned to be a 10-15 minute "catalytic" focused presentation to be scheduled during one of the working sessions at the TIM. This presentation will focus on Advanced Life Support technologies key to future human Space Exploration as outlined in the Vision, and will include basic requirements, assessment of the state-of-the-art and gaps, and include specific technology metrics. The presentation will be technical in character, lean heavily on data in published ALS documents (such as the Baseline Values and Assumptions Document) but not provide specific technical details or build to information on any technology mentioned (thus the presentation will be benign from an export control and a new technology perspective). The topics presented will be focused on the following elements of Advanced Life Support: air revitalization, water recovery, waste management, thermal control, habitation systems, food systems and bioregenerative life support.

Project SAGE: solar assisted gas energy. Final report and executive summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Phase III basic objective was establishment of a technical and economic baseline for proper assessment of the practical potential of solar water heating for apartments. Plans can then be formulated to improve SAGE technical design and performance; reduce SAGE costs; refine SAGE market assessment; and identify policies to encourage the use of SAGE. Two SAGE water heating systems were installed and tested. One system was retrofit onto an existing apartment building; the other was installed in a new apartment building. Each installation required approximately 1000 square feet of collector area tilted to an angle of 37/sup 0/ from themore » horizontal, and each was designed to supply about 70 percent of the energy for heating water for approximately 32 to 40 units of a typical two-story apartment complex in Southern California. Actual contruction costs were carefully compiled, and both installations were equipped with performance monitoring equipment. In addition, the operating and maintenance requirements of each installation was evaluated by gas company maintenance engineers. Upon completion of the installation analysis, the SAGE installation cost was further refined by obtaining firm SAGE construction bids from two plumbing contractors in Southern California. Market penetration was assessed by developing a computer simulation program using the technical and economic analysis from the installation experience. Also, the project examined the public policies required to encourage SAGE and other solar energy options. Results are presented and discussed. (WHK)« less

SNL Mechanical Computer Aided Design (MCAD) guide 2007.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moore, Brandon; Pollice, Stephanie L.; Martinez, Jack R.

2007-12-01

This document is considered a mechanical design best-practice guide to new and experienced designers alike. The contents consist of topics related to using Computer Aided Design (CAD) software, performing basic analyses, and using configuration management. The details specific to a particular topic have been leveraged against existing Product Realization Standard (PRS) and Technical Business Practice (TBP) requirements while maintaining alignment with sound engineering and design practices. This document is to be considered dynamic in that subsequent updates will be reflected in the main title, and each update will be published on an annual basis.

Aeronautics and Space Report of the President: Fiscal Year 2009 Activities

NASA Technical Reports Server (NTRS)

2009-01-01

In fiscal year 2009 (FY 09), the Exploration Systems Mission Directorate's (ESMD) Advanced Capabilities Division (ACD) provided critical research and technology products that reduced operational and technical risks for the flight systems being developed by the Constellation Program.1 These products addressed high-priority technology requirements for lunar exploration; risk mitigation related to astronaut health and performance; basic research in life and physical sciences using the International Space Station (ISS), free-flying spacecraft, and ground-based laboratories; and lunar robotic missions to gather data relevant to future human lunar missions.

Fault detection techniques for complex cable shield topologies

NASA Astrophysics Data System (ADS)

Coonrod, Kurt H.; Davis, Stuart L.; McLemore, Donald P.

1994-09-01

This document presents the results of a basic principles study which investigated technical approaches for developing fault detection techniques for use on cables with complex shielding topologies. The study was limited to those approaches which could realistically be implemented on a fielded cable, i.e., approaches which would require partial disassembly of a cable were not pursued. The general approach used was to start with present transfer impedance measurement techniques and modify their use to achieve the best possible measurement range. An alternative test approach, similar to a sniffer type test, was also investigated.

Technical knowledge and skills development in the informal sector in Kenya: The case of custom tailors

NASA Astrophysics Data System (ADS)

Apunda, Edwinah Amondi; de Klerk, Helena M.; Ogina, Teresa

2017-06-01

Custom tailors working in the informal sector in Nairobi, Kenya, mainly acquire technical skills through undertaking traditional apprenticeships (TAs). However, most of these tailors are semi-skilled, produce low-quality products and are often poorer than their formally trained counterparts. This qualitative case study explores the aspects of technical skills and knowledge which tailoring apprentices develop, and the factors which influence these outcomes. The findings show that apprentices do acquire basic technical skills for immediate application to ongoing tailoring activities (such as how to take body measurements, draft patterns, and cut, sew and finish constructed garments). However, apprentices do not acquire the technical knowledge that underpins the trade. Most master tailors who have completed TAs lack technical knowledge and have no access to technical skills upgrading. This perpetuates the cycle of basic and limited technical skills transfer to apprentices, poor performance and poverty among tailors. Both apprentices and master tailors expressed concern over knowledge limitations in TAs and a need to access further training to improve skills and acquire knowledge of the trade. The authors of this article argue that, technically and pedagogically, skilled master tailors are critical to improving training quality. Complementary training in theoretical knowledge is also important in improving apprentices' technical skills and understanding of the trade. Inclusion of TAs in government policy may help ensure sustainable improvement of skills.

Project T.E.A.M. (Technical Education Advancement Modules). Fundementals of Workplace Integration.

ERIC Educational Resources Information Center

Kraeling, Vicki

This module is one of a series of instructional guides developed by Project TEAM (Technical Education Advancement Modules), a cooperative demonstration program for high technology training for unemployed, underemployed, and existing industrial employees whose basic technical skills are in need of upgrading. The module is a 27-hour overview course…

Project T.E.A.M. (Technical Education Advancement Modules). Introduction to Industrial Physics.

ERIC Educational Resources Information Center

Whisenhunt, James E.

This instructional guide, one of a series developed by the Technical Education Advancement Modules (TEAM) project, is a 20-hour introduction to industrial physics that explains and demonstrates to industrial maintenance mechanics the direct relationship of physics to machinery. Project TEAM is intended to upgrade basic technical competencies of…

Advanced Technical Drafting (Industrial Arts) Curriculum Guide. Bulletin 1751.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This curriculum guide contains materials for a 17-unit course in advanced technical drafting, a followup to the basic technical drafting course in the industrial arts curriculum for grades 10-12. It is intended for use by industrial arts teachers, supervisors, counselors, administrators, and teacher educators. A three-page course overview provides…

30 CFR 736.25 - Permit fees.

Code of Federal Regulations, 2010 CFR

2010-07-01

... application. (2) Technical review. Following receipt from OSM of a notice of administrative completeness, an applicant who pays by stage of review shall submit the technical review basic fee, plus the per-acre fee for.... Following receipt from OSM of a notice of technical adequacy, an applicant who pays by stage of review shall...

7 CFR 610.2 - Scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE Conservation Operations § 610.2 Scope. (a) Conservation operations, including technical assistance, is the basic soil and water conservation program of...

7 CFR 610.2 - Scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE Conservation Operations § 610.2 Scope. (a) Conservation operations, including technical assistance, is the basic soil and water conservation program of...

7 CFR 610.2 - Scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE Conservation Operations § 610.2 Scope. (a) Conservation operations, including technical assistance, is the basic soil and water conservation program of...

7 CFR 610.2 - Scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE Conservation Operations § 610.2 Scope. (a) Conservation operations, including technical assistance, is the basic soil and water conservation program of...

The Basic Surgical Skills Course in Sub-Saharan Africa: An Observational Study of Effectiveness.

PubMed

Fergusson, Stuart J; Sedgwick, David M; Ntakiyiruta, Georges; Ntirenganya, Faustin

2018-04-01

The Basic Surgical Skills (BSS) course is a common component of postgraduate surgical training programmes in sub-Saharan Africa, but was originally designed in a UK context, and its efficacy and relevance have not been formally assessed in Africa. An observational study was carried out during a BSS course delivered to early-stage surgical trainees from Rwanda and the Democratic Republic of the Congo. Technical skill in a basic wound closure task was assessed in a formal Objective Structured Assessment of Technical Skills (OSAT) before and after course completion. Participants completed a pre-course questionnaire documenting existing surgical experience and self-perceived confidence levels in surgical skills which were to be taught during the course. Participants repeated confidence ratings and completed course evaluation following course delivery. A cohort of 17 participants had completed a pre-course median of 150 Caesarean sections as primary operator. Performance on the OSAT improved from a mean of 10.5/17 pre-course to 14.2/17 post-course (mean of paired differences 3.7, p < 0.001). Improvements were seen in 15/17 components of wound closure. Pre-course, only 47% of candidates were forming hand-tied knots correctly and 38% were appropriately crossing hands with each throw, improving to 88 and 76%, respectively, following the course (p = 0.01 for both components). Confidence levels improved significantly in all technical skills taught, and the course was assessed as highly relevant by trainees. The Basic Surgical Skills course is effective in improving the basic surgical technique of surgical trainees from sub-Saharan Africa and their confidence in key technical skills.

Washington State's Integrated Basic Education and Skills Training Program (I-BEST): New Evidence of Effectiveness. CCRC Working Paper No. 20

ERIC Educational Resources Information Center

Zeidenberg, Matthew; Cho, Sung-Woo; Jenkins, Davis

2010-01-01

To increase the rate at which adult basic skills students advance to and succeed in college-level occupational programs, the Washington State Board for Community and Technical Colleges (SBCTC) developed the Integrated Basic Education and Skills Training, or I-BEST. In the I-BEST model, a basic skills instructor and an occupational instructor team…

[Overall design and proof-test of an integrated environmental control and life support system (ECLSS) for demonstration and verification].

PubMed

Rui, Jia-bai; Zheng, Chuan-xian; Zeng, Qing-tang

2002-12-01

Objective. To test and demonstrate embryonic form of our future space station ECLSS, which will also form an advanced research and test ground facility. Method. The following functions of the system were tested and demonstrated: integrated solid amine CO2 collection and concentration, Sabatier CO2 reduction, urine processing thermoelectric integrated membrane evaporation, solid polymer water electrolysis O2 generation, concentrated ventilation, temperature and humidity control, the measurement and control system, and other non-regenerative techniques. All of these were demonstrated in a sealed adiabatic module, and passed the proof-tests. Result. The principal technical requirements of the system and each regenerative subsystem were met. The integration of system general and each subsystem was successful, and the partial closed loop of the system's integration has been realized basically. Conclusion. The reasonableness of the project design was verified, and the major system technical requirements were satisfied. The suitability and harmonization among system general and each subsystem were good, the system operated normally, and the parameters measured were correct.

Evaluation Research in Basic Skills with Incarcerated Adults. Technical Report No. 303.

ERIC Educational Resources Information Center

Meyer, Linda A.; And Others

To evaluate the relative effectiveness of traditional versus computer managed instruction (CMI) basic skills programs for incarcerated adults, 359 male inmates from three traditional self-paced and three PLATO/CMI programs were given pretests in the Test of Adult Basic Education (TABE) and the Tennessee Self-Concept Scale (TSCS). Following three…

An Independent Evaluation of the Technical Features of the Basic Reading Inventory

ERIC Educational Resources Information Center

Bieber, Gregg; Hulac, David M.; Schweinle, William

2015-01-01

The present study investigated some psychometric properties of the Basic Reading Inventory (BRI), a widely used informal reading inventory. The BRI and Dynamic Indicators of Basic Early Literacy Skills (DIBELS) probes were administered to 149 third, fourth, and fifth graders. Test--retest and alternate forms reliability analyses indicated adequate…

Examining the Efficacy of a Basic Functional Behavioral Assessment Training Package for School Personnel

ERIC Educational Resources Information Center

Loman, Sheldon L.; Horner, Robert H.

2014-01-01

This study evaluated the effects of manualized training in "Basic" functional behavioral assessment (FBA) for typical school professionals on the ability of these professionals to complete technically adequate FBAs. Twelve school professionals participated in four 1-hr training sessions using the Basic FBA training handbook. After…

Entrepreneur Program. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

De Maria, Richard

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The document consists of matrices that describe the relationship of vocational skills to basic communication, mathematics, and science skills within the entrepreneur…

Technical Mathematics.

ERIC Educational Resources Information Center

Flannery, Carol A.

This manuscript provides information and problems for teaching mathematics to vocational education students. Problems reflect applications of mathematical concepts to specific technical areas. The materials are organized into six chapters. Chapter 1 covers basic arithmetic, including fractions, decimals, ratio and proportions, percentages, and…

The Method of Multiple Spatial Planning Basic Map

NASA Astrophysics Data System (ADS)

Zhang, C.; Fang, C.

2018-04-01

The "Provincial Space Plan Pilot Program" issued in December 2016 pointed out that the existing space management and control information management platforms of various departments were integrated, and a spatial planning information management platform was established to integrate basic data, target indicators, space coordinates, and technical specifications. The planning and preparation will provide supportive decision support, digital monitoring and evaluation of the implementation of the plan, implementation of various types of investment projects and space management and control departments involved in military construction projects in parallel to approve and approve, and improve the efficiency of administrative approval. The space planning system should be set up to delimit the control limits for the development of production, life and ecological space, and the control of use is implemented. On the one hand, it is necessary to clarify the functional orientation between various kinds of planning space. On the other hand, it is necessary to achieve "multi-compliance" of various space planning. Multiple spatial planning intergration need unified and standard basic map(geographic database and technical specificaton) to division of urban, agricultural, ecological three types of space and provide technical support for the refinement of the space control zoning for the relevant planning. The article analysis the main space datum, the land use classification standards, base map planning, planning basic platform main technical problems. Based on the geographic conditions, the results of the census preparation of spatial planning map, and Heilongjiang, Hainan many rules combined with a pilot application.

Planning Inmarsat's second generation of spacecraft

NASA Astrophysics Data System (ADS)

Williams, W. P.

1982-09-01

The next generation of studies of the Inmarsat service are outlined, such as traffic forecasting studies, communications capacity estimates, space segment design, cost estimates, and financial analysis. Traffic forecasting will require future demand estimates, and a computer model has been developed which estimates demand over the Atlantic, Pacific, and Indian ocean regions. Communications estimates are based on traffic estimates, as a model converts traffic demand into a required capacity figure for a given area. The Erlang formula is used, requiring additional data such as peak hour ratios and distribution estimates. Basic space segment technical requirements are outlined (communications payload, transponder arrangements, etc), and further design studies involve such areas as space segment configuration, launcher and spacecraft studies, transmission planning, and earth segment configurations. Cost estimates of proposed design parameters will be performed, but options must be reduced to make construction feasible. Finally, a financial analysis will be carried out in order to calculate financial returns.

Strategic Control Algorithm Development : Volume 2A. Technical Report.

DOT National Transportation Integrated Search

1974-08-01

The technical report presents a detailed description of the strategic control functional objectives, followed by a presentation of the basic strategic control algorithm and how it evolved. Contained in this discussion are results of analyses that con...

Strategic Control Algorithm Development : Volume 2B. Technical Report (Concluded)

DOT National Transportation Integrated Search

1974-08-01

The technical report presents a detailed description of the strategic control functional objectives, followed by a presentation of the basic strategic control algorithm and how it evolved. Contained in this discussion are the results of analyses that...

SINERGIA laparoscopic virtual reality simulator: didactic design and technical development.

PubMed

Lamata, Pablo; Gómez, Enrique J; Sánchez-Margallo, Francisco M; López, Oscar; Monserrat, Carlos; García, Verónica; Alberola, Carlos; Florido, Miguel Angel Rodríguez; Ruiz, Juan; Usón, Jesús

2007-03-01

VR laparoscopic simulators have demonstrated its validity in recent studies, and research should be directed towards a high training effectiveness and efficacy. In this direction, an insight into simulators' didactic design and technical development is provided, by describing the methodology followed in the building of the SINERGIA simulator. It departs from a clear analysis of training needs driven by a surgical training curriculum. Existing solutions and validation studies are an important reference for the definition of specifications, which are described with a suitable use of simulation technologies. Five new didactic exercises are proposed to train some of the basic laparoscopic skills. Simulator construction has required existing algorithms and the development of a particle-based biomechanical model, called PARSYS, and a collision handling solution based in a multi-point strategy. The resulting VR laparoscopic simulator includes new exercises and enhanced simulation technologies, and is finding a very good acceptance among surgeons.

Application for certification, 1990 model-year light-duty vehicles - US Technical Research Company (Peugeot)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification, 1989 model year light-duty vehicles - US Technical Research Company (Peugeot)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Defining and using open architecture levels

NASA Astrophysics Data System (ADS)

Cramer, M. A.; Morrison, A. W.; Cordes, B.; Stack, J. R.

2012-05-01

Open architecture (OA) within military systems enables delivery of increased warfighter capabilities in a shorter time at a reduced cost.i In fact in today's standards-aware environment, solutions are often proposed to the government that include OA as one of its basics design tenets. Yet the ability to measure and assess OA in an objective manner, particularly at the subsystem/component level within a system, remains an elusive proposition. Furthermore, it is increasingly apparent that the establishment of an innovation ecosystem of an open business model that leverages thirdparty development requires more than just technical modifications that promote openness. This paper proposes a framework to migrate not only towards technical openness, but also towards enabling and facilitating an open business model, driven by third party development, for military systems. This framework was developed originally for the U.S. Navy Littoral and Mine Warfare community; however, the principles and approach may be applied elsewhere within the Navy and Department of Defense.

Improving and monitoring air quality.

PubMed

DuPont, André

2018-05-01

Since the authorization of the Clean Air Act Amendments of 1990, the air quality in the USA has significantly improved because of strong public support. The lessons learned over the last 25 years are being shared with the policy analysts, technical professionals, and scientist who endeavor to improve air quality in their communities. This paper will review how the USA has achieved the "high" standard of air quality that was envisioned in the early 1990s. This document will describe SO 2 gas emission reduction technology and highlight operation of emission monitoring technology. This paper describes the basic process operation of an air pollution control scrubber. A technical review of measures required to operate and maintain a large-scale pollution control system will be described. Also, the author explains how quality assurance procedures in performance of continuous emission monitoring plays a significant role in reducing air pollution.

Problems of standardizing and technical regulation in the electric power industry

NASA Astrophysics Data System (ADS)

Grabchak, E. P.

2016-12-01

A mandatory condition to ensure normal operation of a power system and efficiency in the sector is standardization and legal regulation of technological activities of electric power engineering entities and consumers. Compared to the times of USSR, the present-time technical guidance documents are not mandatory to follow in most cases, being of an advisory nature due to the lack of new ones. During the last five years, the industry has been showing a deterioration of the situation in terms of ensuring reliability and engineering controllability as a result of the dominant impact of short-term market stimuli and the differences in basic technological policies. In absence of clear requirements regarding the engineering aspects of such activities, production operation does not contribute to the preserving of technical integrity of the Russian power system, which leads to the loss of performance capability and controllability and causes disturbances in the power supply to consumers. The result of this problem is a high rate of accident incidence. The dynamics of accidents by the type of equipment is given, indicating a persisting trend of growth in the number of accidents, which are of a systematic nature. Several problematic aspects of engineering activities of electric power engineering entities, requiring standardization and legal regulation are pointed out: in the domestic power system, a large number of power electrotechnical and generating equipment operate along with systems of regulation, which do not comply with the principles and technical rules representing a framework where the Energy System of Russia is built and functioning

Cardiorespiratory Considerations in Dance: From Classes to Performances.

PubMed

Rodrigues-Krause, Josianne; Krause, Mauricio; Reischak-Oliveira, Álvaro

2015-09-01

When attempting to ascertain dancers' fitness levels, essential parameters, such as aerobic and anaerobic capacity, muscular power and strength, flexibility, and body composition, must be considered. Dance is characterized as an intermittent type of exercise, demanding energy from different metabolic pathways (aerobic and anaerobic, lactic or alactic). A dancer's maximum aerobic capacity (ranging from 37 to 57 ml·kg(-1)·min(-1)) is related to his or her dance style, gender, level of technical ability, and status in a dance company. However, dancers' cardiorespiratory requirements during dance classes (essentially designed for the development of technical skills) are significantly lower than during dance performances, indicating that there is a divergence between dance training and performance with regard to demands on dancers' physical fitness. It follows that supplementary fitness training is needed in order to optimize dancers' technical and artistic performance and to reduce the incidence of injury. Traditional aerobic and strength training have been proposed to cover dancers' lack of conditioning; however, it seems likely that high-intensity interval training would more properly meet the requirements of today's choreography. Therefore, with an approach that applies basic exercise physiology to dance characteristics, this review covers the following topics: 1. dance as physical exercise; 2. dancers' aerobic capacity; 3. cardiorespiratory demands of dance classes and performances; 4. supplementary fitness training for dancers; and 5. fitness testing and assessment for dancers.

Vehicle infrastructure integration proof of concept : technical description--vehicle : final report

DOT National Transportation Integrated Search

2009-05-19

This report provides the technical description of the VII system developed for the Cooperative Agreement VII Program between the USDOT and the VII Consortium. The basic architectural elements are summarized and detailed descriptions of the hardware a...

Cognitive training for technical and non-technical skills in robotic surgery: a randomised controlled trial.

PubMed

Raison, Nicholas; Ahmed, Kamran; Abe, Takashige; Brunckhorst, Oliver; Novara, Giacomo; Buffi, Nicolò; McIlhenny, Craig; van der Poel, Henk; van Hemelrijck, Mieke; Gavazzi, Andrea; Dasgupta, Prokar

2018-05-07

To investigate the effectiveness of motor imagery (MI) for technical skill and non-technical skill (NTS) training in minimally invasive surgery (MIS). A single-blind, parallel-group randomised controlled trial was conducted at the Vattikuti Institute of Robotic Surgery, King's College London. Novice surgeons were recruited by open invitation in 2015. After basic robotic skills training, participants underwent simple randomisation to either MI training or standard training. All participants completed a robotic urethrovesical anastomosis task within a simulated operating room. In addition to the technical task, participants were required to manage three scripted NTS scenarios. Assessment was performed by five blinded expert surgeons and a NTS expert using validated tools for evaluating technical skills [Global Evaluative Assessment of Robotic Skills (GEARS)] and NTS [Non-Technical Skills for Surgeons (NOTSS)]. Quality of MI was assessed using a revised Movement Imagery Questionnaire (MIQ). In all, 33 participants underwent MI training and 29 underwent standard training. Interrater reliability was high, Krippendorff's α = 0.85. After MI training, the mean (sd) GEARS score was significantly higher than after standard training, at 13.1 (3.25) vs 11.4 (2.97) (P = 0.03). There was no difference in mean NOTSS scores, at 25.8 vs 26.4 (P = 0.77). MI training was successful with significantly higher imagery scores than standard training (mean MIQ score 5.1 vs 4.5, P = 0.04). Motor imagery is an effective training tool for improving technical skill in MIS even in novice participants. No beneficial effect for NTS was found. © 2018 The Authors BJU International © 2018 BJU International Published by John Wiley & Sons Ltd.

Characteristic of Adaptability - one of basic categories of the social aspect of sustainable housing construction

NASA Astrophysics Data System (ADS)

Orłowski, Z.; Radziejowska, A.; Orłowski, M.

2017-10-01

In the article the authors consider one of the basic aspects of sustainable construction regarding the social utility of a building. According to standard PN-EN 16309+A1:2014-12 during evaluating the social aspect should be assessed six categories: accessibility, adaptability, comfort and health, neighborhood, maintenance, safety and security. The authors present the evaluation criteria witch should be taken into account in the assessment of the second of them. Adaptability has been divided into three categories: The buidling’s ability to accomodate the change of user requirements, The buidling’s ability to accomodate technical changes, The buidling’s ability to accomodate the change of use. Each subcategory has been further elaborated by the criteria for which authors present proposal for the scale of assessments. The authors present a part of a work to construct a method for assessing the social characteristics of the residential buildings.

Sodium-NaK engineering handbook. Volume III. Sodium systems, safety, handling, and instrumentation. [LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foust, O J

1978-01-01

The handbook is intended for use by present and future designers in the Liquid Metals Fast Breeder Reactor (LMFBR) Program and by the engineering and scientific community performing other type investigation and exprimentation requiring high-temperature sodium and NaK technology. The arrangement of subject matter progresses from a technological discussion of sodium and sodium--potassium alloy (NaK) to discussions of varius categories and uses of hardware in sodium and NaK systems. Emphasis is placed on sodium and NaK as heat-transport media. Sufficient detail is included for basic understanding of sodium and NaK technology and of technical aspects of sodium and NaK componentsmore » and instrument systems. Information presented is considered adequate for use in feasibility studies and conceptual design, sizing components and systems, developing preliminary component and system descriptions, identifying technological limitations and problem areas, and defining basic constraints and parameters.« less

Production of antiretroviral drugs in middle- and low-income countries.

PubMed

Pinheiro, Eloan dos Santos; Brüning, Karin; Macedo, M Fernanda; Siani, Antonio C

2014-01-01

This review outlines the main issues concerning the production of antiretroviral (ARV) drugs in middle- and low-income countries and the relevant political, legal and technical requirements for supporting such production. The requirements for efficient local production, including the manufacture of generic and branded products and public demand, have been considered from economic, market and socio-political perspectives. A steady and consistent government policy is crucial to success. Additional crucial factors in establishing local production are adequate infrastructure, qualified human resources in technical and managerial areas, and production-distribution logistics systems. The creation or strengthening of a national drug regulatory agency is a basic requirement. Production of ARVs relies on the structure of the international market for active pharmaceutical ingredients (APIs), which are highly monopolized for inclusion in branded or patented drugs, or are concentrated in a few Asian generic companies. Countries seeking to begin local production must develop strategies to overcome the various barriers. For instance, sub-Saharan African countries may benefit from developing multilateral health agreements with neighbouring countries. Such agreements are recommended and should be complemented by technology transfers, especially for the manufacture of APIs. Achieving a production level that is sustainable in the long term is crucial to maintaining patients' access to ARVs.

Transferring technology to the public sector.

NASA Technical Reports Server (NTRS)

Alper, M. E.

1972-01-01

Approximately four years ago the Jet Propulsion Laboratory, under NASA sponsorship, began to devote some of its resources to examining ways to transfer space technology to the civil sector. As experience accumulated under this program, certain principles basic to success in technology transfer became apparent. An adequate definition of each problem must be developed before any substantial effort is expended on a solution. In most instances, a source of funds other than the potential user is required to support the problem definition phase of the work. Sensitivity to the user's concerns and effective interpersonal communications between the user and technical personnel are essential to success.

Some observations on Chinese education

NASA Technical Reports Server (NTRS)

Spearman, M. L.

1986-01-01

China has encountered many ups and downs in the field of education over the years. Although hampered by financial and personnel problems, impressive progress has been made in primary education since 1949, particularly in urban areas. The total education system is still weak, however, with a serious shortage of qualified teachers, school buildings, and other necessary facilities. Some of the problems involved are discussed. Current efforts aimed at increasing the level of compulsory education are outlined and observations are made on the status and plans relative to basic education, technical and vocational education, teacher training, resource requirements, enrollment trends, and so on.

Physics and the car business

NASA Astrophysics Data System (ADS)

Compton, W. Dale; Reitz, John R.

1981-01-01

Physicists have made important contributions to many areas of Ford Motor Company activity, particularly in areas of basic and applied research and product development. A number have assumed positions with management responsibility. Many of the technical problems facing the automotive industry today require a fundamental understanding, and the ability of physicists to contribute to the solution of these problems is greater now than it has been in the past. The present paper discusses some of these problems, and also traces a few case histories of physicists at Ford Motor Company; these illustrate the wide diversity of career paths for persons entering industry with a physics background.

Using the General Mission Analysis Tool (GMAT)

NASA Technical Reports Server (NTRS)

Hughes, Steven P.; Conway, Darrel J.; Parker, Joel

2017-01-01

This is a software tutorial and presentation demonstrating the application of the General Mission Analysis Tool (GMAT). These slides will be used to accompany the demonstration. The demonstration discusses GMAT basics, then presents a detailed example of GMAT application to the Transiting Exoplanet Survey Satellite (TESS) mission. This talk is a combination of existing presentations and material; system user guide and technical documentation; a GMAT basics and overview, and technical presentations from the TESS projects on their application of GMAT to critical mission design. The GMAT basics slides are taken from the open source training material. The TESS slides are a streamlined version of the CDR package provided by the project with SBU and ITAR data removed by the TESS project. Slides for navigation and optimal control are borrowed from system documentation and training material.

Remaking Career and Technical Education for the 21st Century: What Role for High School Programs?

ERIC Educational Resources Information Center

Kazis, Richard

2005-01-01

As part of the broader policy debate on how to reform K-12 education, particularly high schools, basic questions about career and technical education are on the table. "Remaking Career and Technical Education for the 21st Century" begins with a summary of what researchers know--and do not know--about the value of high school…

Basic energy sciences: Summary of accomplishments

NASA Astrophysics Data System (ADS)

1990-05-01

For more than four decades, the Department of Energy, including its predecessor agencies, has supported a program of basic research in nuclear- and energy related sciences, known as Basic Energy Sciences. The purpose of the program is to explore fundamental phenomena, create scientific knowledge, and provide unique user facilities necessary for conducting basic research. Its technical interests span the range of scientific disciplines: physical and biological sciences, geological sciences, engineering, mathematics, and computer sciences. Its products and facilities are essential to technology development in many of the more applied areas of the Department's energy, science, and national defense missions. The accomplishments of Basic Energy Sciences research are numerous and significant. Not only have they contributed to Departmental missions, but have aided significantly the development of technologies which now serve modern society daily in business, industry, science, and medicine. In a series of stories, this report highlights 22 accomplishments, selected because of their particularly noteworthy contributions to modern society. A full accounting of all the accomplishments would be voluminous. Detailed documentation of the research results can be found in many thousands of articles published in peer-reviewed technical literature.

Basic Energy Sciences: Summary of Accomplishments

DOE R&D Accomplishments Database

1990-05-01

For more than four decades, the Department of Energy, including its predecessor agencies, has supported a program of basic research in nuclear- and energy-related sciences, known as Basic Energy Sciences. The purpose of the program is to explore fundamental phenomena, create scientific knowledge, and provide unique user'' facilities necessary for conducting basic research. Its technical interests span the range of scientific disciplines: physical and biological sciences, geological sciences, engineering, mathematics, and computer sciences. Its products and facilities are essential to technology development in many of the more applied areas of the Department's energy, science, and national defense missions. The accomplishments of Basic Energy Sciences research are numerous and significant. Not only have they contributed to Departmental missions, but have aided significantly the development of technologies which now serve modern society daily in business, industry, science, and medicine. In a series of stories, this report highlights 22 accomplishments, selected because of their particularly noteworthy contributions to modern society. A full accounting of all the accomplishments would be voluminous. Detailed documentation of the research results can be found in many thousands of articles published in peer-reviewed technical literature.

An approach to knowledge structuring for advanced phases of the Technical and Management Information System (TMIS)

NASA Technical Reports Server (NTRS)

Goranson, H. T.

1986-01-01

The Technical and Management Information System (TMIS) must employ on enlightened approach to its object structure, but basic issues in conceptual structuring remain to be resolved. Sirius outlines the necessary agenda and reports on progress toward solutions.

48 CFR 253.209-1 - Responsible prospective contractors.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Section III, Block 19, generally mean— (A) Technical capability. An assessment of the prospective contractor's key management personnel to determine if they have the basic technical knowledge, experience... completion. This includes— (1) An assessment of the prospective contractor's possession of, or the ability to...

Current trends in hardware and software for brain-computer interfaces (BCIs)

NASA Astrophysics Data System (ADS)

Brunner, P.; Bianchi, L.; Guger, C.; Cincotti, F.; Schalk, G.

2011-04-01

A brain-computer interface (BCI) provides a non-muscular communication channel to people with and without disabilities. BCI devices consist of hardware and software. BCI hardware records signals from the brain, either invasively or non-invasively, using a series of device components. BCI software then translates these signals into device output commands and provides feedback. One may categorize different types of BCI applications into the following four categories: basic research, clinical/translational research, consumer products, and emerging applications. These four categories use BCI hardware and software, but have different sets of requirements. For example, while basic research needs to explore a wide range of system configurations, and thus requires a wide range of hardware and software capabilities, applications in the other three categories may be designed for relatively narrow purposes and thus may only need a very limited subset of capabilities. This paper summarizes technical aspects for each of these four categories of BCI applications. The results indicate that BCI technology is in transition from isolated demonstrations to systematic research and commercial development. This process requires several multidisciplinary efforts, including the development of better integrated and more robust BCI hardware and software, the definition of standardized interfaces, and the development of certification, dissemination and reimbursement procedures.

Basic Mechanisms of the Epilepsies.

ERIC Educational Resources Information Center

Jasper, Herbert H., Ed.; And Others

A collection of highly technical scientific articles by international basic and clinical neuroscientists constitutes a review of their knowledge of the brain and nervous system, particularly the aspects related to loss of brain function control and its explosive discharges which cause epileptic seizures. Anatomy, biophysics, biochemistry, and…

Developing Basic Electronics Aptitudes.

ERIC Educational Resources Information Center

Lakeshore Technical Coll., Cleveland, WI.

This curriculum guide provides materials for basic training in electrical and electronic theory to enable participants to analyze circuits and use test equipment to verify electrical operations and to succeed in the beginning electrical and electronic courses in the Lakeshore Technical College (Wisconsin) electronics programs. The course includes…

47 CFR 76.611 - Cable television basic signal leakage performance criteria.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Cable television basic signal leakage performance criteria. 76.611 Section 76.611 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Technical Standards § 76.611 Cable...

Sequential Testing: Basics and Benefits

DTIC Science & Technology

1978-03-01

Eii~TARADC6M and x _..TECHNICAL REPORT NO. 12325 SEQUENTIAL TESTING: BASICS AND BENEFITS / i * p iREFERENCE CP...Sequential Testing: Basics and Benefits Contents Page I. Introduction and Summary II. Sequential Analysis 2 III. Mathematics of Sequential Testing 4 IV...testing. The added benefit of reduced energy needs are inherent in this testing method. The text was originally released by the authors in 1972. The text

Technical/Engineering. Georgia Core Standards for Occupational Clusters.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Occupational Studies.

This document lists core standards and occupational knowledge and skills that have been identified and validated by industry as necessary to all Georgia students in secondary-level technical/engineering programs. First, foundation skills are grouped as follows: basic skills (reading, writing, arithmetic/mathematics, listening, speaking); thinking…

Architectural Drafting: Commercial Applications. Teacher Guide.

ERIC Educational Resources Information Center

Whitney, Terry A.

This curriculum guide contains the technical information and tasks necessary for a student (who has already completed basic drafting) to be employed as an architectural drafter trainee. The curriculum is written in terms of student performance using measurable objectives, technical information, tasks developed to accomplish those objectives, and…

An Educational Multimedia Presentation on the Introduction to Spacecraft Charging

NASA Technical Reports Server (NTRS)

Lin, E.; dePayrebrune, M.

2004-01-01

Over the last few decades, significant knowledge has been gained in how to protect spacecraft from charging; however, the continuing technical advancement in the design and build of satellites requires on-going effort in the study of spacecraft charging. A situation that we have encountered is that not all satellite designers and builders are familiar with the problem of spacecraft charging. The design of a satellite involves many talented people with diverse backgrounds, ranging from manufacturing and assembly to engineering and program management. The complex design and build of a satellite system requires people with highly specialized skills such that cross-specialization is often not achievable. As a result, designers and builders of satellites are not usually familiar with the problems outside their specialization. This is also true for spacecraft charging. Not everyone is familiar with the definition of spacecraft charging and the damage that spacecraft charging can cause. Understanding the problem is an important first step in getting everyone involved in addressing the appropriate spacecraft charging issues during the satellite design and build phases. To address this important first step, an educational multimedia presentation has been created to inform the general engineering community about the basics of spacecraft charging. The content of this educational presentation is based on relevant published technical papers. The presentation was developed using Macromedia Flash. This software produces a more dynamic learning environment than a typical slide show , resulting in a more effective learning experience. The end result is that the viewer will have learned about the basics of spacecraft charging. This presentation is available to the public through our website, www.dplscience.com, free of charge. Viewers are encouraged to pass this presentation to colleagues within their own work environment. This paper describes the content of the multimedia presentation.

Universities Earth System Scientists Program

NASA Technical Reports Server (NTRS)

Estes, John E.

1995-01-01

This document constitutes the final technical report for the National Aeronautics and Space Administration (NASA) Grant NAGW-3172. This grant was instituted to provide for the conduct of research under the Universities Space Research Association's (USRA's) Universities Earth System Scientist Program (UESSP) for the Office of Mission to Planet Earth (OMTPE) at NASA Headquarters. USRA was tasked with the following requirements in support of the Universities Earth System Scientists Programs: (1) Bring to OMTPE fundamental scientific and technical expertise not currently resident at NASA Headquarters covering the broad spectrum of Earth science disciplines; (2) Conduct basic research in order to help establish the state of the science and technological readiness, related to NASA issues and requirements, for the following, near-term, scientific uncertainties, and data/information needs in the areas of global climate change, clouds and radiative balance, sources and sinks of greenhouse gases and the processes that control them, solid earth, oceans, polar ice sheets, land-surface hydrology, ecological dynamics, biological diversity, and sustainable development; (3) Evaluate the scientific state-of-the-field in key selected areas and to assist in the definition of new research thrusts for missions, including those that would incorporate the long-term strategy of the U.S. Global Change Research Program (USGCRP). This will, in part, be accomplished by study and evaluation of the basic science needs of the community as they are used to drive the development and maintenance of a global-scale observing system, the focused research studies, and the implementation of an integrated program of modeling, prediction, and assessment; and (4) Produce specific recommendations and alternative strategies for OMTPE that can serve as a basis for interagency and national and international policy on issues related to Earth sciences.

Methodology for the systems engineering process. Volume 2: Technical parameters

NASA Technical Reports Server (NTRS)

Nelson, J. H.

1972-01-01

A scheme based on starting the logic networks from the development and mission factors that are of primary concern in an aerospace system is described. This approach required identifying the primary states (design, design verification, premission, mission, postmission), identifying the attributes within each state (performance capability, survival, evaluation, operation, etc), and then developing the generic relationships of variables for each branch. To illustrate this concept, a system was used that involved a launch vehicle and payload for an earth orbit mission. Examination showed that this example was sufficient to illustrate the concept. A more complicated mission would follow the same basic approach, but would have more extensive sets of generic trees and more correlation points between branches. It has been shown that in each system state (production, test, and use), a logic could be developed to order and classify the parameters involved in the translation from general requirements to specific requirements for system elements.

Fundamentals of neurosurgery: virtual reality tasks for training and evaluation of technical skills.

PubMed

Choudhury, Nusrat; Gélinas-Phaneuf, Nicholas; Delorme, Sébastien; Del Maestro, Rolando

2013-11-01

Technical skills training in neurosurgery is mostly done in the operating room. New educational paradigms are encouraging the development of novel training methods for surgical skills. Simulation could answer some of these needs. This article presents the development of a conceptual training framework for use on a virtual reality neurosurgical simulator. Appropriate tasks were identified by reviewing neurosurgical oncology curricula requirements and performing cognitive task analyses of basic techniques and representative surgeries. The tasks were then elaborated into training modules by including learning objectives, instructions, levels of difficulty, and performance metrics. Surveys and interviews were iteratively conducted with subject matter experts to delimitate, review, discuss, and approve each of the development stages. Five tasks were selected as representative of basic and advanced neurosurgical skill. These tasks were: 1) ventriculostomy, 2) endoscopic nasal navigation, 3) tumor debulking, 4) hemostasis, and 5) microdissection. The complete training modules were structured into easy, intermediate, and advanced settings. Performance metrics were also integrated to provide feedback on outcome, efficiency, and errors. The subject matter experts deemed the proposed modules as pertinent and useful for neurosurgical skills training. The conceptual framework presented here, the Fundamentals of Neurosurgery, represents a first attempt to develop standardized training modules for technical skills acquisition in neurosurgical oncology. The National Research Council Canada is currently developing NeuroTouch, a virtual reality simulator for cranial microneurosurgery. The simulator presently includes the five Fundamentals of Neurosurgery modules at varying stages of completion. A first pilot study has shown that neurosurgical residents obtained higher performance scores on the simulator than medical students. Further work will validate its components and use in a training curriculum. Copyright © 2013 N. Choudhury. Published by Elsevier Inc. All rights reserved.

Percutaneous Management of Accidentally Retained Foreign Bodies During Image-Guided Non-vascular Procedures: Novel Technique Using a Large-Bore Biopsy System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cazzato, Roberto Luigi, E-mail: gigicazzato@hotmail.it; Garnon, Julien, E-mail: juleiengarnon@gmail.com; Ramamurthy, Nitin, E-mail: nitin-ramamurthy@hotmail.com

ObjectiveTo describe a novel percutaneous image-guided technique using a large-bore biopsy system to retrieve foreign bodies (FBs) accidentally retained during non-vascular interventional procedures.Materials and MethodsBetween May 2013 and October 2015, five patients underwent percutaneous retrieval of five iatrogenic FBs, including a biopsy needle tip in the femoral head following osteoblastoma biopsy and radiofrequency ablation (RFA); a co-axial needle shaft within a giant desmoid tumour following cryoablation; and three post-vertebroplasty cement tails within paraspinal muscles. All FBs were retrieved immediately following original procedures under local or general anaesthesia, using combined computed tomography (CT) and fluoroscopic guidance. The basic technique involved positioningmore » a 6G trocar sleeve around the FB long axis and co-axially advancing an 8G biopsy needle to retrieve the FB within the biopsy core. Retrospective chart review facilitated analysis of procedures, FBs, technical success, and complications.ResultsMean FB size was 23 mm (range 8–74 mm). Four FBs were located within 10 mm of non-vascular significant anatomic structures. The basic technique was successful in 3 cases; 2 cases required technical modifications including using a stiff guide-wire to facilitate retrieval in the case of the post-cryoablation FB; and using the central mandrin of the 6G trocar to push a cement tract back into an augmented vertebra when initial retrieval failed. Overall technical success (FB retrieval or removal to non-hazardous location) was 100 %, with no complications.ConclusionPercutaneous image-guided retrieval of iatrogenic FBs using a large-bore biopsy system is a feasible, safe, effective, and versatile technique, with potential advantages over existing methods.« less

Functions and requirements for tank farm restoration and safe operations, Project W-314. Revision 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garrison, R.C.

1995-02-01

This Functions and Requirements document (FRD) establishes the basic performance criteria for Project W-314, in accordance with the guidance outlined in the letter from R.W. Brown, RL, to President, WHC, ``Tank Waste Remediation System (TWRS) Project Documentation Methodology,`` 94-PRJ-018, dated 3/18/94. The FRD replaces the Functional Design Criteria (FDC) as the project technical baseline documentation. Project W-314 will improve the reliability of safety related systems, minimize onsite health and safety hazards, and support waste retrieval and disposal activities by restoring and/or upgrading existing Tank Farm facilities and systems. The scope of Project W-314 encompasses the necessary restoration upgrades of themore » Tank Farms` instrumentation, ventilation, electrical distribution, and waste transfer systems.« less

Actions Needed to Ensure Scientific and Technical Information is Adequately Reviewed at Goddard Space Flight Center, Johnson Space Center, Langley Research Center, and Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

2008-01-01

This audit was initiated in response to a hotline complaint regarding the review, approval, and release of scientific and technical information (STI) at Johnson Space Center. The complainant alleged that Johnson personnel conducting export control reviews of STI were not fully qualified to conduct those reviews and that the reviews often did not occur until after the STI had been publicly released. NASA guidance requires that STI, defined as the results of basic and applied scientific, technical, and related engineering research and development, undergo certain reviews prior to being released outside of NASA or to audiences that include foreign nationals. The process includes technical, national security, export control, copyright, and trade secret (e.g., proprietary data) reviews. The review process was designed to preclude the inappropriate dissemination of sensitive information while ensuring that NASA complies with a requirement of the National Aeronautics and Space Act of 1958 (the Space Act)1 to provide for the widest practicable and appropriate dissemination of information resulting from NASA research activities. We focused our audit on evaluating the STI review process: specifically, determining whether the roles and responsibilities for the review, approval, and release of STI were adequately defined and documented in NASA and Center-level guidance and whether that guidance was effectively implemented at Goddard Space Flight Center, Johnson Space Center, Langley Research Center, and Marshall Space Flight Center. Johnson was included in the review because it was the source of the initial complaint, and Goddard, Langley, and Marshall were included because those Centers consistently produce significant amounts of STI.

The Video Handbook.

ERIC Educational Resources Information Center

1972

In order to provide basic technical and production information for closed-circuit television, the editors have assembled this series of papers. Deisgned as an introductory guide for those entering the field, the handbook covers the basic areas of non-broadcast television. Starting with facilities and equipment the guide outlines the planning and…

Linking Educational Philosophy with Micro-Level Technology: The Search for a Complete Method.

ERIC Educational Resources Information Center

Januszewski, Alan

Traditionally, educational technologists have not been concerned with social or philosophical questions, and the field does not have a basic educational philosophy. Instead, it is dominated by a viewpoint characterized as "technical rationality" or "technicism"; the most important assumption of this viewpoint is that science…

Differences in the Vocational Interests of Research and Development Managers versus Technical Specialists.

ERIC Educational Resources Information Center

Hill, Raymond E.; Roselle, Pamela F.

1985-01-01

Compared the occupational interests of research and development managers (N=110) and technical specialists (N=55). Analysis on the general occupational themes and basic interest scales of the Strong-Campbell Interest Inventory indicated the social, enterprising, and conventional areas predicted managerial group membership, whereas the artistic…

Food Service Technical Terms. English-Spanish Lexicon.

ERIC Educational Resources Information Center

Shin, Masako T.

This English-Spanish lexicon presents food service technical terms. The terms are divided into seven categories: basic food items, common baking terms, food cutting terms, general cooking terms, non-English culinary terms, and tools and equipment. Each English word or term is followed by its Spanish equivalent(s). (YLB)

Unified Technical Concepts. Application Modules Volume II.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Unified Technical Concepts (UTC) is a modular system for teaching applied physics in two-year postsecondary technician programs. This UTC laboratory textbook, the second of two volumes, consists of 45 learning modules dealing with basic concepts of physics. Addressed in the individual chapters of the guide are the following topics: force…

Using Design Principles to Teach Technical Communication.

ERIC Educational Resources Information Center

Markel, Mike

1995-01-01

Compares the writing of two students--a competent writer and a weak one--in a technical communication course before and after discussion of design principles. Finds that a basic understanding of design principles helped them improve document macrostructure but had little effect on document microstructure. Suggests that integrating document design…

Stafford Technical Center: Designing a Future for Architects and Builders

ERIC Educational Resources Information Center

Lucci, William, Jr.

2005-01-01

The Engineering Technology Academy (ETA) program at Stafford Technical Center in Rutland, Vermont, offers benefits beyond the conventional high school learning experience. In September, at the beginning of the program, students learn the traditional skills of using tools, line weights and lettering. Once they develop these basic skills, students…

Seven Keys to Successful Study.

ERIC Educational Resources Information Center

Edwards, Peter

Written for secondary, technical, and technical and further education (TAFE) students, this book aims to make learning easier and more enjoyable by showing students how to use a series of basic study skills called "keys." The book offers an explanation, examples, graphic illustrations, and activities for each skill. Chapters include: (1)…

Career Technical Education Enhancement Fund Report

ERIC Educational Resources Information Center

California Community Colleges, Chancellor's Office, 2015

2015-01-01

The California Community Colleges serve more than 2.1 million students and is the largest system of higher education in the nation. The state's 112 colleges provide workforce training, teach basic math and English, and prepare students for transfer to four-year universities and colleges. Senate Bill 852 established the Career Technical Education…

The Internet and Technical Services: A Point Break Approach.

ERIC Educational Resources Information Center

McCombs, Gillian M.

1994-01-01

Discusses implications of using the Internet for library technical services. Topics addressed include creative uses of the Internet; three basic applications on the Internet, i.e., electronic mail, remote log-in to another computer, and file transfer; electronic processing of information; electronic access to information; and electronic processing…

Archival Stability of Microfilm--A Technical Review.

ERIC Educational Resources Information Center

Materazzi, Albert R.

The purpose of this report is to acquaint all personnel with some technical aspects of micrographics. The various film types used in the production of microfiche are discussed, including silver halide, diazo, and vesicular films. Other imaging systems used in micrographics are reviewed, and a basic introduction to sensitometry is given. The…

Entomology Specialist 1-1. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Jones, Jimmie L.

This individualized, self-paced course for training an entomology specialist was adapted from military curriculum materials for use in vocational and technical education. Completion of the course should provide students with basic information needed to accomplish the following duties of an entomology specialist: perform entomological work, apply…

32 CFR 65.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-called `A' School). (3) In the case of members of the Air Force, Basic Military Training and Technical..., U.S.C. Entry Level and Skill Training. (1) In the case of members of the Army, Basic Combat Training and Advanced Individual Training, which includes members attending One Station Unit Training (OSUT...

38 CFR 21.9505 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (Authority: 38 U.S.C. 3034(a), 3323(a), 3680(g)) Entry level and skill training means— (1) Basic Combat Training and Advanced Individual Training for members of the Army; (2) Recruit Training (Boot Camp) and Skill Training (“A” School) for members of the Navy; (3) Basic Military Training and Technical Training...

47 CFR 76.611 - Cable television basic signal leakage performance criteria.

Code of Federal Regulations, 2014 CFR

2014-10-01

... average power level of the strongest cable television carrier on the system. (c) In paragraph (a)(1) and... 47 Telecommunication 4 2014-10-01 2014-10-01 false Cable television basic signal leakage...) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Technical Standards § 76.611 Cable...

47 CFR 76.611 - Cable television basic signal leakage performance criteria.

Code of Federal Regulations, 2013 CFR

2013-10-01

... average power level of the strongest cable television carrier on the system. (c) In paragraph (a)(1) and... 47 Telecommunication 4 2013-10-01 2013-10-01 false Cable television basic signal leakage...) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Technical Standards § 76.611 Cable...

47 CFR 76.611 - Cable television basic signal leakage performance criteria.

Code of Federal Regulations, 2012 CFR

2012-10-01

... average power level of the strongest cable television carrier on the system. (c) In paragraph (a)(1) and... 47 Telecommunication 4 2012-10-01 2012-10-01 false Cable television basic signal leakage...) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Technical Standards § 76.611 Cable...

Welding. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Browning, Terry

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Machine Shop Practice, 13-2. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Army Ordnance Center and School, Aberdeen Proving Ground, MD.

This military-developed text consists of self-instructional materials dealing with the basic tools and equipment used in metalworking shops. Covered in the individual lessons are the following topics: materials and processes; shop mathematics; blueprint reading and sketching; handtools, measuring instruments, and basic metalworking machines;…

A Suggested Basic Course Outline for Industrial Electronics.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Vocational Instructional Services.

This course outline for industrial electronics, one of a series for teaching vocational industrial shop subjects in public schools, includes basic skills and technical information for the course. It should be supplemented with other complementary and necessary areas of related instruction. Fifteen major blocks, divided into 2 years of instruction,…

10 CFR 76.87 - Technical safety requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Technical safety requirements. 76.87 Section 76.87 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.87 Technical safety requirements. (a) The Corporation shall establish technical safety requirements. In...

10 CFR 76.87 - Technical safety requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Technical safety requirements. 76.87 Section 76.87 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.87 Technical safety requirements. (a) The Corporation shall establish technical safety requirements. In...

10 CFR 76.87 - Technical safety requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Technical safety requirements. 76.87 Section 76.87 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.87 Technical safety requirements. (a) The Corporation shall establish technical safety requirements. In...

10 CFR 76.87 - Technical safety requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Technical safety requirements. 76.87 Section 76.87 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.87 Technical safety requirements. (a) The Corporation shall establish technical safety requirements. In...

10 CFR 76.87 - Technical safety requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Technical safety requirements. 76.87 Section 76.87 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.87 Technical safety requirements. (a) The Corporation shall establish technical safety requirements. In...

Human Factors in Training - Space Flight Resource Management Training

NASA Technical Reports Server (NTRS)

Bryne, Vicky; Connell, Erin; Barshi, Immanuel; Arsintescu, L.

2009-01-01

Accidents and incidents show that high workload-induced stress and poor teamwork skills lead to performance decrements and errors. Research on teamwork shows that effective teams are able to adapt to stressful situations, and to reduce workload by using successful strategies for communication and decision making, and through dynamic redistribution of tasks among team members. Furthermore, superior teams are able to recognize signs and symptoms of workload-induced stress early, and to adapt their coordination and communication strategies to the high workload, or stress conditions. Mission Control Center (MCC) teams often face demanding situations in which they must operate as an effective team to solve problems with crew and vehicle during onorbit operations. To be successful as a team, flight controllers (FCers) must learn effective teamwork strategies. Such strategies are the focus of Space Flight Resource Management (SFRM) training. SFRM training in MOD has been structured to include some classroom presentations of basic concepts and case studies, with the assumption that skill development happens in mission simulation. Integrated mission simulations do provide excellent opportunities for FCers to practice teamwork, but also require extensive technical knowledge of vehicle systems, mission operations, and crew actions. Such technical knowledge requires lengthy training. When SFRM training is relegated to integrated simulations, FCers can only practice SFRM after they have already mastered the technical knowledge necessary for these simulations. Given the centrality of teamwork to the success of MCC, holding SFRM training till late in the flow is inefficient. But to be able to train SFRM earlier in the flow, the training cannot rely on extensive mission-specific technical knowledge. Hence, the need for a generic SFRM training framework that would allow FCers to develop basic teamwork skills which are mission relevant, but without the required mission knowledge. Work on SFRM training has been conducted in collaboration with the Expedition Vehicle Division at the Mission Operations Directorate (MOD) and with United Space Alliance (USA) which provides training to Flight Controllers. The space flight resource management training work is part of the Human Factors in Training Directed Research Project (DRP) of the Space Human Factors Engineering (SHFE) Project under the Space Human Factors and Habitability (SHFH) Element of the Human Research Program (HRP). Human factors researchers at the Ames Research Center have been investigating team work and distributed decision making processes to develop a generic SFRM training framework for flight controllers. The work proposed for FY10 continues to build on this strong collaboration with MOD and the USA Training Group as well as previous research in relevant domains such as aviation. In FY10, the work focuses on documenting and analyzing problem solving strategies and decision making processes used in MCC by experienced FCers.

Designing for human presence in space: An introduction to environmental control and life support systems

NASA Technical Reports Server (NTRS)

Wieland, Paul

1994-01-01

Human exploration and utilization of space requires habitats to provide appropriate conditions for working and living. These conditions are provided by environmental control and life support systems (ECLSS) that ensure appropriate atmosphere composition, pressure, and temperature; manage and distribute water, process waste matter, provide fire detection and suppression; and other functions as necessary. The functions that are performed by ECLSS are described and basic information necessary to design an ECLSS is provided. Technical and programmatic aspects of designing and developing ECLSS for space habitats are described including descriptions of technologies, analysis methods, test requirements, program organization, documentation requirements, and the requirements imposed by medical, mission, safety, and system needs. The design and development process is described from initial trade studies through system-level analyses to support operation. ECLSS needs for future space habitats are also described. Extensive listings of references and related works provide sources for more detailed information on each aspect of ECLSS design and development.

Automated space processing payloads study. Volume 2, book 1: Technical report. [instrument packages and space shuttles

NASA Technical Reports Server (NTRS)

1975-01-01

The extent was investigated to which experiment hardware and operational requirements can be met by automatic control and material handling devices; payload and system concepts that make extensive use of automation technology are defined. Hardware requirements for each experiment were established and tabulated, and investigations of applicable existing hardware were documented. The capabilities and characteristics of industrial automation equipment, controls, and techniques are presented in the form of a summary of applicable equipment characteristics in three basic mutually-supporting formats. Facilities for performing groups of experiments are defined along with four levitation groups and three furnace groups; major hardware elements required to implement them were identified. A conceptual design definition of ten different automated processing facilities is presented along with the specific equipment to implement each facility and the design layouts of the different units. Constraints and packaging, weight, and power requirements for six payloads postulated for shuttle missions in the 1979 to 1982 time period were examined.

BASiCS: Bayesian Analysis of Single-Cell Sequencing Data

PubMed Central

Vallejos, Catalina A.; Marioni, John C.; Richardson, Sylvia

2015-01-01

Single-cell mRNA sequencing can uncover novel cell-to-cell heterogeneity in gene expression levels in seemingly homogeneous populations of cells. However, these experiments are prone to high levels of unexplained technical noise, creating new challenges for identifying genes that show genuine heterogeneous expression within the population of cells under study. BASiCS (Bayesian Analysis of Single-Cell Sequencing data) is an integrated Bayesian hierarchical model where: (i) cell-specific normalisation constants are estimated as part of the model parameters, (ii) technical variability is quantified based on spike-in genes that are artificially introduced to each analysed cell’s lysate and (iii) the total variability of the expression counts is decomposed into technical and biological components. BASiCS also provides an intuitive detection criterion for highly (or lowly) variable genes within the population of cells under study. This is formalised by means of tail posterior probabilities associated to high (or low) biological cell-to-cell variance contributions, quantities that can be easily interpreted by users. We demonstrate our method using gene expression measurements from mouse Embryonic Stem Cells. Cross-validation and meaningful enrichment of gene ontology categories within genes classified as highly (or lowly) variable supports the efficacy of our approach. PMID:26107944

BASiCS: Bayesian Analysis of Single-Cell Sequencing Data.

PubMed

Vallejos, Catalina A; Marioni, John C; Richardson, Sylvia

2015-06-01

Single-cell mRNA sequencing can uncover novel cell-to-cell heterogeneity in gene expression levels in seemingly homogeneous populations of cells. However, these experiments are prone to high levels of unexplained technical noise, creating new challenges for identifying genes that show genuine heterogeneous expression within the population of cells under study. BASiCS (Bayesian Analysis of Single-Cell Sequencing data) is an integrated Bayesian hierarchical model where: (i) cell-specific normalisation constants are estimated as part of the model parameters, (ii) technical variability is quantified based on spike-in genes that are artificially introduced to each analysed cell's lysate and (iii) the total variability of the expression counts is decomposed into technical and biological components. BASiCS also provides an intuitive detection criterion for highly (or lowly) variable genes within the population of cells under study. This is formalised by means of tail posterior probabilities associated to high (or low) biological cell-to-cell variance contributions, quantities that can be easily interpreted by users. We demonstrate our method using gene expression measurements from mouse Embryonic Stem Cells. Cross-validation and meaningful enrichment of gene ontology categories within genes classified as highly (or lowly) variable supports the efficacy of our approach.

STI/DOE Solar decathlon- Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Washington, Gregory

2016-04-14

Team Orange successfully designed and constructed a house driven by new design concepts and technical innovations that harmonize with Southern California’s lifestyle and respect its cultural heritage. The basic elements of our 2015 proposal can be summarized as follows: Increased emphasis on the passive solar design concept, with a visually stimulating design that enhances the Southern California lifestyle; Use of design and construction techniques to create a market-ready home for an efficient and affordable lifestyle; Integrated use of new technology to create a behavior-adaptive smart home; A zero net energy house complying with the Living Building philosophy; and compliance withmore » all DOE Solar Decathlon requirements.« less

Advanced Solar Power Systems

NASA Technical Reports Server (NTRS)

Atkinson, J. H.; Hobgood, J. M.

1984-01-01

The Advanced Solar Power System (ASPS) concentrator uses a technically sophisticated design and extensive tooling to produce very efficient (80 to 90%) and versatile energy supply equipment which is inexpensive to manufacture and requires little maintenance. The advanced optical design has two 10th order, generalized aspheric surfaces in a Cassegrainian configuration which gives outstanding performance and is relatively insensitive to temperature changes and wind loading. Manufacturing tolerances also have been achieved. The key to the ASPS is the direct absorption of concentrated sunlight in the working fluid by radiative transfers in a black body cavity. The basic ASPS design concepts, efficiency, optical system, and tracking and focusing controls are described.

Design and fabrication of solar cell modules

NASA Technical Reports Server (NTRS)

Shaughnessy, T. P.

1978-01-01

A program conducted for design, fabrication and evaluation of twelve silicon solar cell modules is described. The purpose of the program was to develop a module design consistent with the requirements and objectives of JPL specification and to also incorporate elements of new technologies under development to meet LSSA Project goals. Module development emphasized preparation of a technically and economically competitive design based upon utilization of ion implanted solar cells and a glass encapsulation system. The modules fabricated, tested and delivered were of nominal 2 X 2 foot dimensions and 20 watt minimum rating. Basic design, design rationale, performance and results of environmental testing are described.

Space Station Furnace Facility Core. Requirements definition and conceptual design study. Volume 2: Technical report. Appendix 6: Technical summary reports

NASA Technical Reports Server (NTRS)

1992-01-01

The Space Station Furnace Facility (SSFF) is a modular facility for materials research in the microgravity environment of the Space Station Freedom (SSF). The SSFF is designed for crystal growth and solidification research in the fields of electronic and photonic materials, metals and alloys, and glasses and ceramics and will allow for experimental determination of the role of gravitational forces in the solidification process. The facility will provide a capability for basic scientific research and will evaluate the commercial viability of low-gravity processing of selected technologically important materials. The facility is designed to support a complement of furnace modules as outlined in the Science Capabilities Requirements Document (SCRD). The SSFF is a three rack facility that provides the functions, interfaces, and equipment necessary for the processing of the furnaces and consists of two main parts: the SSFF Core Rack and the two Experiment Racks. The facility is designed to accommodate two experimenter-provided furnace modules housed within the two experiment racks, and is designed to operate these two furnace modules simultaneously. The SCRD specifies a wide range of furnace requirements and serves as the basis for the SSFF conceptual design. SSFF will support automated processing during the man-tended operations and is also designed for crew interface during the permanently manned configuration. The facility is modular in design and facilitates changes as required, so the SSFF is adept to modifications, maintenance, reconfiguration, and technology evolution.

10 CFR 830.205 - Technical safety requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2010-01-01 2010-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

10 CFR 830.205 - Technical safety requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2011-01-01 2011-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

Unified Technical Concepts. Application Modules Volume I.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Unified Technical Concepts (UTC) is a modular system for teaching applied physics in two-year postsecondary technician programs. This UTC laboratory textbook, the first of two volumes, consists of 56 learning modules dealing with basic concepts of physics. Addressed in the individual chapters of the guide are the following topics: force, work,…

United States Air Force Training Line Simulator. Final Report.

ERIC Educational Resources Information Center

Nauta, Franz; Pierce, Michael B.

This report describes the technical aspects and potential applications of a computer-based model simulating the flow of airmen through basic training and entry-level technical training. The objective of the simulation is to assess the impacts of alternative recruit classification and training policies under a wide variety of assumptions regarding…

Weather Observer, 15-1. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, was designed to upgrade an apprentice weather observer to the weather observer specialist level. Intended to be used in a laboratory or on-the-job learning situation, it contains both basic information needed for review and supervisory…

Defense Technical Information Center thesaurus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickert, J.H.

This DTIC Thesaurus provides a basic multidisciplinary subject term vocabulary used by DTIC to index and retrieve scientific and technical information from its various data bases and to aid DTIC`s users in their information storage and retrieval operations. It includes an alphabetical posting term display, a hierarchy display, and a Keywork Out of Context (KWOC) display.

Industrial Arts Curriculum Guide in Basic Technical Drafting. Bulletin No. 1686.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This curriculum guide contains operational guidelines to help local administrators, teacher educators, and industrial arts teachers in the State of Louisiana determine the extent to which their technical drafting courses are meeting the needs of the youth they serve. It consists of a discussion of course prerequisites, goals, content, and…

Pennsylvania Blue Shield Job Linked Skills Program. Teacher's Manual [and] Technical Manual.

ERIC Educational Resources Information Center

Pennsylvania State Univ., University Park. Inst. for the Study of Adult Literacy.

Two closely related publications from the same project, a Teacher's Manual" and a "Technical Manual", are combined here. These manuals are intended to accompany a work force literacy course designed to meet the basic skills needs of midliterate adults employed or preparing for employment in the health insurance industry.…

Interactive Methods of Teaching Physics at Technical Universities

ERIC Educational Resources Information Center

Krišták, L'uboš; Nemec, Miroslav; Danihelová, Zuzana

2014-01-01

The paper presents results of "non-traditional" teaching of the basic course of Physics in the first year of study at the Technical University in Zvolen, specifically teaching via interactive method enriched with problem tasks and experiments. This paper presents also research results of the use of the given method in conditions of…

New Training Technologies. Studies on Technical and Vocational Education 2.

ERIC Educational Resources Information Center

Herremans, Albert

This book is the second in a series aiming to promote international exchange of ideas, experiences, and studies relating to technical and vocational education. Information provided is designed to help educators and trainers plan for an intelligent use of new training technologies (NTTs) to improve the access to basic and advanced lifelong learning…

Demonstration and Research Program for Teaching Young String Players. Final Report.

ERIC Educational Resources Information Center

Yarborough, William

This report explains a system for rapidly training beginning students in the technical aspects of playing a stringed instrument. The program also affords them a well-rounded, basic knowledge of music. A "numerical" method of notation and concentrated muscular exercises greatly speeded the technical learning process. The daily coordination of ear…

Voprosy professional'noj pedagogiki (Aspects of the Theory of Vocational Education).

ERIC Educational Resources Information Center

Batysev, S. J.; And Others

This document is an English-language abstract (Approximately 1,500 words) of a book by several Soviet authorities on vocational and technical education. The five sections of the book deal with general aspects of vocational and technical training; the theory of vocational training; psychological aspects of vocational training; basic instructional…

SURVEY OF INFORMATION ON VOCATIONAL AND TECHNICAL EDUCATION IN THE STATE OF ILLINOIS. FINAL REPORT.

ERIC Educational Resources Information Center

Corplan Associates, Chicago, IL. Technology Center.

THE BASIC OBJECTIVE OF THE SURVEY WAS TO GATHER INFORMATION HELPFUL IN PLANNING AND DEVELOPING VOCATIONAL AND TECHNICAL EDUCATION PRIMARILY WITHIN THE PUBLIC SCHOOL SYSTEM. OCCUPATIONAL NEEDS WERE IDENTIFIED FROM FORECASTS OF CHANGES IN CURRENT OCCUPATIONS, AN ANALYSIS OF THE IMPLICATIONS OF SCIENTIFIC AND TECHNOLOGICAL DEVELOPMENTS, AND…

Scientific and Technical Information Transfer for Education (STITE). Research Report No. 2.

ERIC Educational Resources Information Center

Zunde, Pranas

STITE (Scientific and Technical Information Transfer for Education) is basically a system to interface between science information and the science learner. As such STITE acts as a link between STIC (Science and Technology Infromation Centers) and LIS (Learning Information Systems). In this second progress report the internal knowledge of STITE is…

Basic EMC Technology Advancement for C3 Systems - Model Revision for IEMCAP. Volume 5

DTIC Science & Technology

1984-10-01

important asset. 126 REFERENCES [1] J. L. Bogdanor , et. al., Inttasystem Electromagnetic Compatibility Analy- sis Program, Technical Report, RADC-TR-74...Method of Moments, Technical Report, RADC-TR-82-286, Vol. IV A, Rome Air Development Center, Griffiss AFB, NY, November 1982. [30] J. B. Bogdanor , M. D

Construction Surveying, 3-27. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This short course on construction surveying was developed from military curriculum materials for use in technical and vocational education programs. Students completing the course should be able to perform engineering surveys related to area and route surveying (knowledge of basic survey techniques is a prerequisite). The course is divided into…

Development of an Internet Security Policy for health care establishments.

PubMed

Ilioudis, C; Pangalos, G

2000-01-01

The Internet provides unprecedented opportunities for interaction and data sharing among health care providers, patients and researchers. However, the advantages provided by the Internet come with a significantly greater element of risk to the confidentiality and integrity of information. This paper defines the basic security requirements that must be addressed in order to use the Internet to safely transmit patient and/or other sensitive Health Care information. It describes a suitable Internet Security Policy for Health Care Establishments and provides the set of technical measures that are needed for its implementation. The proposed security policy and technical approaches have been based on an extensive study of the related recommendations from the security and standard groups both in EU amid USA and our related work and experience. The results have been utilized in the framework of the Intranet Health Clinic project, where the use of the Internet for the transmission of sensitive Health Care information is of vital importance.

Johnson Space Center's strategic game plan: Charting a course to the year 2000 and beyond

NASA Technical Reports Server (NTRS)

1987-01-01

The Johnson Space Center has established five major goals to meet the Nation's expectation of maintaining U.S. preeminence in space. The first three are technical in nature. They define the basic mission-the reason for being. The two goals relating to the Space Shuttle and Space Station are obviously the most demanding in their immediate claim for major resources. The third goal is equally important in that the technical competence must be maintained and enhanced. The remaining two goals address the two critical success factors required for achieving the first three. One goal pertains to maintaining and enhancing the highly skilled work force. The other goal concerns the important relations with other key members of the U.S. space team. Each goal is listed along with a proposed strategy or approach for implementing each goal. Subsequently, each goal is accompanied by a brief explanation and a set of objectives. These objectives provide the specific targets of opportunity for focusing the immediate efforts.

Cellular therapies for heart disease: unveiling the ethical and public policy challenges.

PubMed

Raval, Amish N; Kamp, Timothy J; Hogle, Linda F

2008-10-01

Cellular therapies have emerged as a potential revolutionary treatment for cardiovascular disease. Promising preclinical results have resulted in a flurry of basic research activity and spawned multiple clinical trials worldwide. However, the optimal cell type and delivery mode have not been determined for target patient populations. Nor have the mechanisms of benefit for the range of cellular interventions been clearly defined. Experiences to date have unveiled a myriad of ethical and public policy challenges which will affect the way researchers and clinicians make decisions for both basic and clinical research. Stem cells derived from embryos are at the forefront of the ethical and political debate, raising issues of which derivation methods are morally and socially permissible to pursue, as much as which are technically feasible. Adult stem cells are less controversial; however, important challenges exist in determining study design, cell processing, delivery mode, and target patient population. Pathways to successful commercialization and hence broad accessibility of cellular therapies for heart disease are only beginning to be explored. Comprehensive, multi-disciplinary and collaborative networks involving basic researchers, clinicians, regulatory officials and policymakers are required to share information, develop research, regulatory and policy standards and enable rational and ethical cell-based treatment approaches.

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 21: Basic Transistor Theory; Module 21T: Multi-Element Vacuum Tubes. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This set of individualized learning modules on transistor theory is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Two modules are included in…

Automotive Mechanics. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Brown, Desmond

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Design Drafting. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Sharkey, Jeff

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

An Assessment of the Basic Curriculum Guide for Teaching Vocational Agriculture in Texas.

ERIC Educational Resources Information Center

Brown, Herman D.

The major purpose of this study was to revise the basic production agriculture curriculum guide used by vocational agrculture teachers in Texas. A twenty-five member advisory committee for curriculum revision conducted the following activities: (1) obtained thirty-one curriculum guides for a technical agriculture program, (2) surveyed vocational…

Validation of the Military Entrance Physical Strength Capacity Test. Technical Report 610.

ERIC Educational Resources Information Center

Myers, David C.; And Others

A battery of physical ability tests was validated using a predictive, criterion-related strategy. The battery was given to 1,003 female soldiers and 980 male soldiers before they had begun Army Basic Training. Criterion measures which represented physical competency in Basic Training (physical proficiency tests, sick call, profiles, and separation…

Marine Trades. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Abbott, Alan

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Fashion Merchandising. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Williams, Edwina

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Food Services. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Vastano, Josephine; And Others

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Recreational Vehicle Maintenance and Repair. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Felice, Michael

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Application of the Virginia STEPS (Student/Teacher Education Planning System) by Basic Skills Education Teachers.

ERIC Educational Resources Information Center

Seguin, Barbara; Swanson, Lois

The Virginia STEPS (Student/Teacher Education Planning System) was developed to enable adult basic education (ABE) students to become independent learners responsible for planning, carrying out, evaluating, and making adjustments in their education. ABE instructors at Blackhawk Technical College in Wisconsin have adapted the STEPS model to make…

Commercial Building Construction (Masonry). COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Keck, Robert

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Plumbing and Heating. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Mahieu, Louis

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Air Conditioning, Refrigeration and Heating. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Hardman, Thomas

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Building Trades. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Gudzak, Raymond

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; a preface; a…

Auto Body Repair. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Ormsbee, Robert

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Measuring the Utility of a Basic French Vocabulary.

ERIC Educational Resources Information Center

Savard, Jean-Guy; Richards, Jack C.

Using frequency, range, availability, and coverage as objectively weighted indices of utility in the development of a basic French vocabulary list, the authors describe the technical procedure used in this study and list the resultant first 153 words according to the four indices and the utility rating. Weighting factors for each index, based on…

Electrical Trades. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Cannone, Richard

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Development and Evaluation of a Vocational Experience Curriculum for Educable and Disadvantaged Students. Final Report.

ERIC Educational Resources Information Center

Hardin County Board of Education, Elizabethtown, KY.

A project was designed to measure the effects of integrating basic reading and mathematical instruction with prevocational instruction through the addition of a basic skills resource room, a technical simulation unit, and guidance and counseling to the ninth grade vocational experience program for educable mentally handicapped and disadvantaged…

Ciclo Basico Polivalente (Basic Comprehensive Courses of Study).

ERIC Educational Resources Information Center

Boletin del Centro Nacional de Documentacion e Informacion Educativa, 1970

1970-01-01

This article discusses the creation of comprehensive secondary schools in Argentina to meet the diversified goals of the population in any given geographical region. The plan described here provides for the creation of several basic-study cycles within one school so that students may pursue courses in commercial, technical, and academic fields.…

Cosmetology/Hairstyling. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Romano, Marie

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Automotive and Diesel Engine Rebuilding. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Salvatore, Gerald

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Custom Cabinetmaking. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Holmes, Kenneth

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Medical Office Receptionist/Assistant. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Gorman, Dolores

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Landscaping and Greenhouse Technology. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Kucharewski, Dennis

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Child Care Aide. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Moore, Pamela Hullen

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Dental Assisting. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Mattia, Nancy

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Definition of spacecraft standard interfaces by the NASA Space Assembly and Servicing Working Group (SASWG)

NASA Technical Reports Server (NTRS)

Radtke, Robert; Woolley, Charles; Arnold, Lana

1993-01-01

The purpose of the NASA Space Assembly and Servicing Working Group (SASWG) is to study enabling technologies for on-orbit spacecraft maintenance and servicing. One key technology required for effective space logistics activity is the development of standard spacecraft interfaces, including the 'Basic Set' defined by NASA, the U.S. Space Command, and industry panelists to be the following: (1) navigation aids; (2) grasping, berthing, and docking; and (3) utility connections for power, data, and fluids. Draft standards have been prepared and referred to professional standards organizations, including the AIAA, EIA, and SAE space standards committee. The objective of the SASWG is to support these committees with the technical expertise required to prepare standards, guidelines, and recommended practices which will be accepted by the ANSI and international standards organizations, including the ISO, IEC, and PASC.

[Evaluating the efficiency of basic public health service project in Beijing rural areas based on data envelopment analysis].

PubMed

Zhang, Gui-lin; Pan, Xi-long

2013-04-18

To measure the efficiency changes of basic public health service in Beijing rural areas and to provide some suggestions for the basic public health service project throughout China. In the study, stratified random samples from 32 township health centers (THCs) were measured by data envelopment analysis (DEA) model with the panel data from 2007 to 2009. (1) The average total efficiency score of samples was 0.972. The TE non-efficient THCs were with excess in all input indicators and insufficient outputs in technology management, health promotion and chronic disease management. (2) The total factor productivity (TFP) from 2007 to 2008 increased 8.8%, which was attributed to technology change. The TFP decreased by 6.6% from 2008 to 2009, but the technical efficiency increased by 3.3%. There is room for improvemrnt in the basic public health service project in Beijing rural areas. Scale efficiency should be improved and the common development of technical efficiency and technology progress promoted in order to increase the project outputs.

EVA tools and equipment reference book

NASA Technical Reports Server (NTRS)

Fullerton, R. K.

1993-01-01

This document contains a mixture of tools and equipment used throughout the space shuttle-based extravehicular activity (EVA) program. Promising items which have reached the prototype stage of development are also included, but should not be considered certified ready for flight. Each item is described with a photo, a written discussion, technical specifications, dimensional drawings, and points of contact for additional information. Numbers on the upper left-hand corner of each photo may be used to order specific pictures from NASA and contractor photo libraries. Points of contact were classified as either operational or technical. An operational contact is an engineer from JSC Mission Operations Directorate who is familiar with the basic function and on-orbit use of the tool. A technical contact would be the best source of detailed technical specifications and is typically the NASA subsystem manager. The technical information table for each item uses the following terms to describe the availability or status of each hardware item: Standard - Flown on every mission as standard manifest; Flight specific - Potentially available for flight, not flown every mission (flight certification cannot be guaranteed and recertification may be required); Reference only - Item no longer in active inventory or not recommended for future use, some items may be too application-specific for general use; and Developmental - In the prototype stage only and not yet available for flight. The current availability and certification of any flight-specific tool should be verified with the technical point of contact. Those tools built and fit checked for Hubble Space Telescope maintenance are program dedicated and are not available to other customers. Other customers may have identical tools built from the existing, already certified designs as an optional service.

Method for loading lipid like vesicles with drugs of other chemicals

DOEpatents

Mehlhorn, R.J.

1998-06-09

A method for accumulating drugs or other chemicals within synthetic, lipid-like vesicles by means of a pH gradient imposed on the vesicles just prior to use is described. The method is suited for accumulating molecules with basic or acid moieties which are permeable to the vesicles membranes in their uncharged form and for molecules that contain charge moieties that are hydrophobic ions and can therefore cross the vesicle membranes in their charged form. The method is advantageous over prior art methods for encapsulating biologically active materials within vesicles in that is achieves very high degrees of loading with simple procedures that are economical and require little technical expertise, furthermore kits which can be stored for prolonged periods prior to use without impairment of the capacity to achieve drug accumulation are described. A related application of the method consists of using this technology to detoxify animals that have been exposed to poisons with basic, weak acid or hydrophobic charge groups within their molecular structures. 2 figs.

Method for loading lipid like vesicles with drugs of other chemicals

DOEpatents

Mehlhorn, Rolf Joachim

1998-01-01

A method for accumulating drugs or other chemicals within synthetic, lipid-like vesicles by means of a pH gradient imposed on the vesicles just prior to use is described. The method is suited for accumulating molecules with basic or acid moieties which are permeable to the vesicles membranes in their uncharged form and for molecules that contain charge moieties that are hydrophobic ions and can therefore cross the vesicle membranes in their charged form. The method is advantageous over prior art methods for encapsulating biologically active materials within vesicles in that is achieves very high degrees of loading with simple procedures that are economical and require little technical expertise, furthermore kits which can be stored for prolonged periods prior to use without impairment of the capacity to achieve drug accumulation are described. A related application of the method consists of using this technology to detoxify animals that have been exposed to poisons with basic, weak acid or hydrophobic charge groups within their molecular structures.

Economic optimization of the energy transport component of a large distributed solar power plant

NASA Technical Reports Server (NTRS)

Turner, R. H.

1976-01-01

A solar thermal power plant with a field of collectors, each locally heating some transport fluid, requires a pipe network system for eventual delivery of energy power generation equipment. For a given collector distribution and pipe network geometry, a technique is herein developed which manipulates basic cost information and physical data in order to design an energy transport system consistent with minimized cost constrained by a calculated technical performance. For a given transport fluid and collector conditions, the method determines the network pipe diameter and pipe thickness distribution and also insulation thickness distribution associated with minimum system cost; these relative distributions are unique. Transport losses, including pump work and heat leak, are calculated operating expenses and impact the total system cost. The minimum cost system is readily selected. The technique is demonstrated on six candidate transport fluids to emphasize which parameters dominate the system cost and to provide basic decision data. Three different power plant output sizes are evaluated in each case to determine severity of diseconomy of scale.

Method of detoxifying animal suffering from overdose

DOEpatents

Mehlhorn, Rolf J.

1997-01-01

A method for accumulating drugs or other chemicals within synthetic, lipid-like vesicles by means of a pH gradient imposed on the vesicles just prior to use is described. The method is suited for accumulating molecules with basic or acid moieties which are permeable to the vesicles membranes in their uncharged form and for molecules that contain charge moieties that are hydrophobic ions and can therefore cross the vesicle membranes in their charged form. The method is advantageous over prior art methods for encapsulating biologically active materials within vesicles in that it achieves very high degrees of loading with simple procedures that are economical and require little technical expertise, furthermore kits which can be stored for prolonged periods prior to use without impairment of the capacity to achieve drug accumulation are described. A related application of the method consists of using this technology to detoxify animals that have been exposed to poisons with basic, weak acid or hydrophobic charge groups within their molecular structure.

CIVIL TECHNOLOGY, HIGHWAY AND STRUCTURAL OPTIONS, A SUGGESTED 2-YEAR POST HIGH SCHOOL CURRICULUM. TECHNICAL EDUCATION PROGRAM SERIES, NUMBER 8.

ERIC Educational Resources Information Center

BEAUMONT, JOHN A; AND OTHERS

DESIGNED TO ASSIST ADMINISTRATORS, SUPERVISORS, AND TEACHERS TO PLAN, DEVELOP, AND EVALUATE PROGRAMS, THIS CURRICULUM GUIDE OFFERS COURSE OUTLINES, PROCEDURES, LABORATORY LAYOUTS, TEXTS AND REFERENCES, LISTS OF LABORATORY EQUIPMENT AND ITS COST, AND A SELECTED LIST OF SCIENTIFIC AND TECHNICAL SOCIETIES. BASIC MATERIALS WERE PREPARED AT THE…

Pharmacy Specialist, 10-8. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

These teacher and student materials for a postsecondary-level course in pharmacy comprise one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. The purpose stated for the 256-hour course is to train students in the basic technical phases of…

Unified Technical Concepts--Phase II. Expand Application to Industrial Technologies and Adult Education. Final Report.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

A project was conducted to develop a laboratory-based instructional system in physics for two-year technician programs that emphasizes both the analogies between basic physical principles and the applications of the principles in modern technology. The Unified Technical Concepts (UTC) system that was developed is (1) a reorganization of physics…

Syntactical and Punctuation Errors: An Analysis of Technical Writing of University Students Science College, Taif University, KSA

ERIC Educational Resources Information Center

Alamin, Abdulamir; Ahmed, Sawsan

2012-01-01

Analyzing errors committed by second language learners during their first year of study at the University of Taif, can offer insights and knowledge of the learners' difficulties in acquiring technical English communication. With reference to the errors analyzed, the researcher found that the learners' failure to understand basic English grammar…

Scientific and Technical Information and Transfer for Education (STITE). Research Report No. 1.

ERIC Educational Resources Information Center

Zunde, Pranas

STITE (Scientific and Technical Information Transfer for Education) is basically a system to interface between science information and the science learner. As such STITE acts as a link between STIC (Science and Technology Information Centers) and LIS (Learning Information Systems). After an introduction to the goals and objectives of the ongoing…

Psychiatry Ward Specialist, 10-12. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, is designed to train students to perform as assistants to professional personnel in the care and treatment of patients in mental health units. It includes basic concepts of human behavior, the aspects of atypical adjustive reactions, the…

Construction Mechanic Part I, 8-5. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, is the first of a two-course series that teaches students to maintain and repair automotive and construction equipment using either gasoline or diesel engines. It covers basic combustion engine principles and electrical system principles as well…

A Descriptive Study of the Classroom Instruction Component of the ESEA Title VII Bilingual Education Program. Technical Report.

ERIC Educational Resources Information Center

Cardenas, Rene F.; And Others

The technical report portion of a national survey of bilingual education programs funded under Title VII of the Elementary and Secondary Education Act is presented. The study, conducted during 1979-83, describes the characteristics of the programs' classroom instruction component. Basic project directors and parent advisory committee chairpersons…

Mathematics for the Technical Student: The Use of the Computer in the Systems Approach to Instruction.

ERIC Educational Resources Information Center

Capps, Joan P.

An instructional method using flow-chart symbols to make mathematical abstractions more concrete was implemented for a year in a technical mathematics course. Students received instruction in computer applications and programming in the BASIC language in order to increase motivation and firm the mathematical skills and problem-solving approaches…

Construction Mechanic Part II, 8-6. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, is the second of a two-course series that teaches students to maintain and repair automotive and construction equipment using either gasoline or diesel engines. It covers basic chassis and power train troubleshooting, diagnosis, and adjustment…

Marine Science Technician Second Class, 15-2. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, was designed to provide the theory portion of the Marine Science Technician Program. It includes a review of basic subjects, marine biology, oceanography, as well as meteorologic observations and recording. The course consists of a lesson book…

Das Sprachlabor in der Schule (The Language Laboratory in Schools).

ERIC Educational Resources Information Center

Cabus, Hans-Joachim; Freudenstein, Reinhold

This technical manual for the use of language laboratories includes information on the following topics: (1) types of laboratories, (2) the tape, (3) the tape recorder, (4) other basic technical equipment, (5) the audio-active laboratory, the audio-active-compare laboratory, and an evaluation of the two, (6) possibilities for expanded use, (7)…

easyCBM® Reading Criterion Related Validity Evidence: Grades K-1. Technical Report #1309

ERIC Educational Resources Information Center

Lai, Cheng-Fei; Alonzo, Julie; Tindal, Gerald

2013-01-01

In this technical report, we present the results of a study to gather criterion-related evidence for Grade K-1 easyCBM® reading measures. We used correlations to examine the relation between the easyCBM® measures and other published measures with known reliability and validity evidence, including the Dynamic Indicators of Basic Early Literacy…

Third Progress and Information Report of the Vocational-Technical Education Consortium of States.

ERIC Educational Resources Information Center

Lee, Connie W.; And Others

This description of major activities and accomplishments of the Vocational-Technical Education Consortium of the States (V-TECS) since the second progress report of May, 1975, is designed to provide the reader with a basic understanding of the processes and procedures used by the consortium in achieving its major goal: The production of catalogs…

Demand, Supply and Results for Secondary Career and Technical Education.

ERIC Educational Resources Information Center

Washington State Workforce Training and Education Coordinating Board, Olympia.

The benefits of offering high school students career and technical education (CTE) in addition to training in basic academic skills and the cost-effectiveness of CTE were examined by reviewing available data on demand, supply, and results for CTE. The analysis confirmed that the market and demand for workers with only a high school education still…

Carpentry I, 3-8A. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Army Engineer School, Fort Belvoir, VA.

This individualized, self-paced correspondence course in carpentry has been adapted from military curriculum materials for use in vocational and technical education programs. This first volume of a two-volume set is designed to present the theory portion of carpentry and basic skills. The Carpentry I course contains four lessons. Lesson l, Job…

Materials Testing and Quality Control Soils, 3-28. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This instructional package on material testing and quality control of soils has been adapted from military curriculum materials for use in technical and vocational education programs. This short course presents basic information on soils as well as exploration, field identification, and laboratory procedures that will enable students completing…

Technical Efficiency and Primary Education in South Africa: Evidence from Sub-National Level Analyses

ERIC Educational Resources Information Center

Boateng, Nana Adowaa

2014-01-01

The paper examines the extent to which sub-national public officials are efficient in delivering basic education services and argues that technical inefficiencies, especially in the management of public funds for education, could potentially contribute to poor education service delivery in South Africa. A conceptual framework is proposed to show…

Performance of Retrained Airmen in Air Force Technical Schools (Revised). Interim Report for Period January 1981-August 1982.

ERIC Educational Resources Information Center

Skinner, Mary J.; Alley, William E.

Research was conducted to determine the effect of changing occupational specialties on the performance of Air Force retrained enlistees attending basic technical schools. The academic performance and attrition rates of approximately 20,000 retrainees and 230,000 nonprior-service enlistees (nonretrainees) attending 272 schools were compared.…

The Data Warehouse: Keeping It Simple. MIT Shares Valuable Lessons Learned from a Successful Data Warehouse Implementation.

ERIC Educational Resources Information Center

Thorne, Scott

2000-01-01

Explains why the data warehouse is important to the Massachusetts Institute of Technology community, describing its basic functions and technical design points; sharing some non-technical aspects of the school's data warehouse implementation that have proved to be important; examining the importance of proper training in a successful warehouse…

Requirement Generation for Space Infrastructure Systems

NASA Astrophysics Data System (ADS)

Hempsell, M.

Despite heavy investment, in the half-century period between 1970 and 2020 there will almost no progress in the capability provided by the space infrastructure. It is argued that this is due to a failure during the requirement generation phase of the infrastructure's elements, a failure that is primarily due to following the accepted good practice of involving stakeholders while establishing a mission based set of technical requirements. This argument is supported by both a consideration of the history of the requirement generation phase of past space infrastructure projects, in particular the Space Shuttle, and an analysis of the interactions of the stakeholders during this phase. Traditional stakeholder involvement only works well in mature infrastructures where investment aims to make minor improvements, whereas space activity is still in the early experimental stages and is open to major new initiatives that aim to radically change the way we work in space. A new approach to requirement generation is proposed, which is more appropriate to these current circumstances. This uses a methodology centred on the basic functions the system is intended to perform rather than its expected missions.

Parametric Cost Analysis: A Design Function

NASA Technical Reports Server (NTRS)

Dean, Edwin B.

1989-01-01

Parametric cost analysis uses equations to map measurable system attributes into cost. The measures of the system attributes are called metrics. The equations are called cost estimating relationships (CER's), and are obtained by the analysis of cost and technical metric data of products analogous to those to be estimated. Examples of system metrics include mass, power, failure_rate, mean_time_to_repair, energy _consumed, payload_to_orbit, pointing_accuracy, manufacturing_complexity, number_of_fasteners, and percent_of_electronics_weight. The basic assumption is that a measurable relationship exists between system attributes and the cost of the system. If a function exists, the attributes are cost drivers. Candidates for metrics include system requirement metrics and engineering process metrics. Requirements are constraints on the engineering process. From optimization theory we know that any active constraint generates cost by not permitting full optimization of the objective. Thus, requirements are cost drivers. Engineering processes reflect a projection of the requirements onto the corporate culture, engineering technology, and system technology. Engineering processes are an indirect measure of the requirements and, hence, are cost drivers.

Civilian Radioactive Waste Management System Requirements Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

C.A. Kouts

2006-05-10

The CRD addresses the requirements of Department of Energy (DOE) Order 413.3-Change 1, ''Program and Project Management for the Acquisition of Capital Assets'', by providing the Secretarial Acquisition Executive (Level 0) scope baseline and the Program-level (Level 1) technical baseline. The Secretarial Acquisition Executive approves the Office of Civilian Radioactive Waste Management's (OCRWM) critical decisions and changes against the Level 0 baseline; and in turn, the OCRWM Director approves all changes against the Level 1 baseline. This baseline establishes the top-level technical scope of the CRMWS and its three system elements, as described in section 1.3.2. The organizations responsible formore » design, development, and operation of system elements described in this document must therefore prepare subordinate project-level documents that are consistent with the CRD. Changes to requirements will be managed in accordance with established change and configuration control procedures. The CRD establishes requirements for the design, development, and operation of the CRWMS. It specifically addresses the top-level governing laws and regulations (e.g., ''Nuclear Waste Policy Act'' (NWPA), 10 Code of Federal Regulations (CFR) Part 63, 10 CFR Part 71, etc.) along with specific policy, performance requirements, interface requirements, and system architecture. The CRD shall be used as a vehicle to incorporate specific changes in technical scope or performance requirements that may have significant program implications. Such may include changes to the program mission, changes to operational capability, and high visibility stakeholder issues. The CRD uses a systems approach to: (1) identify key functions that the CRWMS must perform, (2) allocate top-level requirements derived from statutory, regulatory, and programmatic sources, and (3) define the basic elements of the system architecture and operational concept. Project-level documents address CRD requirements by further defining system element functions, decomposing requirements into significantly greater detail, and developing designs of system components, facilities, and equipment. The CRD addresses the identification and control of functional, physical, and operational boundaries between and within CRWMS elements. The CRD establishes requirements regarding key interfaces between the CRWMS and elements external to the CRWMS. Project elements define interfaces between CRWMS program elements. The Program has developed a change management process consistent with DOE Order 413.3-Change 1. Changes to the Secretarial Acquisition Executive and Program-level baselines must be approved by a Program Baseline Change Control Board. Specific thresholds have been established for identifying technical, cost, and schedule changes that require approval. The CRWMS continually evaluates system design and operational concepts to optimize performance and/or cost. The Program has developed systems analysis tools to assess potential enhancements to the physical system and to determine the impacts from cost saving initiatives, scientific and technological improvements, and engineering developments. The results of systems analyses, if appropriate, are factored into revisions to the CRD as revised Programmatic Requirements.« less

Efficient and Rapid Isolation of Early-stage Embryos from Arabidopsis thaliana Seeds

PubMed Central

Raissig, Michael T.; Gagliardini, Valeria; Jaenisch, Johan; Grossniklaus, Ueli; Baroux, Célia

2013-01-01

In flowering plants, the embryo develops within a nourishing tissue - the endosperm - surrounded by the maternal seed integuments (or seed coat). As a consequence, the isolation of plant embryos at early stages (1 cell to globular stage) is technically challenging due to their relative inaccessibility. Efficient manual dissection at early stages is strongly impaired by the small size of young Arabidopsis seeds and the adhesiveness of the embryo to the surrounding tissues. Here, we describe a method that allows the efficient isolation of young Arabidopsis embryos, yielding up to 40 embryos in 1 hr to 4 hr, depending on the downstream application. Embryos are released into isolation buffer by slightly crushing 250-750 seeds with a plastic pestle in an Eppendorf tube. A glass microcapillary attached to either a standard laboratory pipette (via a rubber tube) or a hydraulically controlled microinjector is used to collect embryos from droplets placed on a multi-well slide on an inverted light microscope. The technical skills required are simple and easily transferable, and the basic setup does not require costly equipment. Collected embryos are suitable for a variety of downstream applications such as RT-PCR, RNA sequencing, DNA methylation analyses, fluorescence in situ hybridization (FISH), immunostaining, and reporter gene assays. PMID:23770918

On the Basis of the Basic Variety.

ERIC Educational Resources Information Center

Schwartz, Bonnie D.

1997-01-01

Considers the interplay between source and target language in relation to two points made by Klein and Perdue: (1) the argument that the analysis of the target language should not be used as the model for analyzing interlanguage data; and (2) the theoretical claim that under the technical assumptions of minimalism, the Basic Variety is a "perfect"…

The Philosopher's Stone: How Basic Skills Programs Fare in Troubled Financial Times

ERIC Educational Resources Information Center

Ray, Thomas P.

2012-01-01

This mixed methods study examined the relative position of basic skills programs with transfer and career technical programs in a large suburban community college in California during the three-year period of budget reductions from 2009-2010 through 2011-2012. The budget line dedicated to part-time or non-contract instruction was analyzed along…

ESAA Basic Summer School. Technical Report: 1979-80. Publication No. 80.19.

ERIC Educational Resources Information Center

Porterfield, Craig; Eglsaer, Richard

A total of 359 retained seventh and eighth grade students from the Austin (Texas) Independent School District's junior high schools participated in a summer enrichment program that was designed to improve their basic skills and decision making skills and to provide them with a successful school experience. Diagnostic information was used to assign…

Filing Alphabetically. Basic Rules. Student's Manual and Instructor's Manual.

ERIC Educational Resources Information Center

McLeod, Sadie

Supporting performance objectives 21, 25, and 26 of the V-TECS (Vocational-Technical Education Consortium of States) Secretarial Catalog, both a set of student materials and an instructor's manual on the basic rules of filing alphabetically are included in this packet. (The packet is the first in a set of nine on maintaining files and a…

Structured Hypermedia Application Development Model (SHADM): A structured Model for Technical Documentation Application Design

DTIC Science & Technology

1991-12-01

effective (19:15) Figure 2 details a flowchart of the basic steps in prototyping. The basic concept behind prototyping is to quickly produce a working...One approach to overcoming this is to structure the document relative to the experience level of the user (14:49). A "novice" or beginner would

An Inventory of U.S. Navy Courses Suitable for Use in Training Civiliam Personnel in Basic Technical Skills.

ERIC Educational Resources Information Center

Rogers, William A., Jr.; Nisos, Michael J.

An inventory of courses of study developed by the United States Navy which might be useful to other private and public institutions in training civilian students in basic technological skills is presented. Individual course reports contain the following information: course description, comments, course content (including blocks of instruction and…

Attention, Intention and the Structure of Discourse. Technical Report No. 380.

ERIC Educational Resources Information Center

Grosz, B. J.; Sidner, C. L.

Developing and integrating two lines of research, one focusing on discourse and the other on intention recognition in discourse, this paper presents the basic elements of a computational theory of discourse. The paper argues that by specifying the basic units a discourse comprises and the ways in which they can relate, an account of discourse…

A Basic Vocabulary and a Bibliography for Scientific and Technical English.

ERIC Educational Resources Information Center

Brunt, Richard J.

The selection of 594 words in this basic vocabulary list was compiled from various dictionaries and frequency lists for physics, mathematics and civil engineering. The list attempts to include those words which have been found to be unknown by German students learning English for science and technology. In addition to the word list, a bibliography…

Career and Technical Education Administration: Requirements, Certification/Licensure, and Preparation

ERIC Educational Resources Information Center

Zirkle, Christopher J.; Jeffery, Jeremy O.

2017-01-01

The current climate of career and technical administration requirements in all 50 states was detailed and explored. An increasing number of states are not requiring specific career-technical administration certification/licensure in order to oversee secondary career and technical education (CTE) programs, with more states moving towards a general…

Educational Video Recording and Editing for The Hand Surgeon

PubMed Central

Rehim, Shady A.; Chung, Kevin C.

2016-01-01

Digital video recordings are increasingly used across various medical and surgical disciplines including hand surgery for documentation of patient care, resident education, scientific presentations and publications. In recent years, the introduction of sophisticated computer hardware and software technology has simplified the process of digital video production and improved means of disseminating large digital data files. However, the creation of high quality surgical video footage requires basic understanding of key technical considerations, together with creativity and sound aesthetic judgment of the videographer. In this article we outline the practical steps involved with equipment preparation, video recording, editing and archiving as well as guidance for the choice of suitable hardware and software equipment. PMID:25911212

Skeletal and dental considerations in orthodontic treatment mechanics: a contemporary view.

PubMed

Nanda, Ravindra; Upadhyay, Madhur

2013-10-01

Orthodontics has undergone a paradigm shift in the last 40 years. There have been both technical and philosophical changes ushered by the development of new appliances, techniques, and by the explosion in the amount of research being conducted all around the world. However, the application of any new concept requires a firm understanding of the fundamentals of orthodontics. This paper presents a broad review of some fundamental concepts of treatment mechanics that enable us to bring about skeletal and dental correction of the presenting malocclusion. The basic concepts of facemask therapy, mechanics, and biology of tooth movement will be discussed with an insight into the challenges facing us in the future.

Accelerator science in medical physics.

PubMed

Peach, K; Wilson, P; Jones, B

2011-12-01

The use of cyclotrons and synchrotrons to accelerate charged particles in hospital settings for the purpose of cancer therapy is increasing. Consequently, there is a growing demand from medical physicists, radiographers, physicians and oncologists for articles that explain the basic physical concepts of these technologies. There are unique advantages and disadvantages to all methods of acceleration. Several promising alternative methods of accelerating particles also have to be considered since they will become increasingly available with time; however, there are still many technical problems with these that require solving. This article serves as an introduction to this complex area of physics, and will be of benefit to those engaged in cancer therapy, or who intend to acquire such technologies in the future.

New irradiation facilities for development of production methods of medical radionuclides at cyclotrons at Forschungszentrum Jülich

NASA Astrophysics Data System (ADS)

Spellerberg, S.; Scholten, B.; Spahn, I.; Felden, O.; Gebel, R.; Qaim, S. M.; Bai, M.; Neumaier, B.

2017-05-01

An essential basis for research and development work on radiopharmaceuticals is the efficient production of radionuclides of high quality. In this process research-oriented studies aiming for elucidation of biochemical processes require novel products. The radionuclide development at INM-5 entails basic research, e.g. the determination of nuclear reaction data, as well as technical aspects of practical production, such as high-current targetry, chemical separation, formulation and quality control. In this work developments, adaptation and optimization of irradiation facilities at the BC 1710, JULIC as Injector of COSY and COSY itself are summarized, which shall allow the extension of radionuclide production possibilities, aiming at innovations in medical applications.

Operating a transmission company under open access: The basic requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunt, S.; Shuttleworth, G.

1993-03-01

In both Europe and North America, technical and legal changes are increasing the opportunities for electricity traders to use transmission lines and grids that are owned by other companies. This article discusses the view that transmission maybe a service potentially separable from the production and retailing of electricity, and that transmission should be freely available at an appropriate price. Grid operators are wary of proposals to open access to transmission. European legislators want grid operators to become Transmission System Operators (TSO), moving energy around the network for others. Also discussed in this article are the powers that the TSO shouldmore » be allowed to exercise if access to transmission is made available.« less

Advanced study of global oceanographic requirements for EOS A/B: Technical volume

NASA Technical Reports Server (NTRS)

1972-01-01

Characteristics of the ocean are considered in terms of U.S. social, scientific and ecomomic priorities and in terms of the measurements that can best be made from a spacecraft. The kinds of information needed to advance the basic ocean sciences, to improve marine transportation and fisheries operations, and to provide information for pollution control are discussed. These information needs were related to sensor concepts and an optimum sensor complement is presented, together with orbital considerations. The data-gathering capabilities of an oceanographic spacecraft were considered in relation to those of terrestrial oceanographic programs, using airborne, surface, and submarine platforms. Data management problems are discussed and are considered to be solvable with current technology.

Methods and means used in programming intelligent searches of technical documents

NASA Technical Reports Server (NTRS)

Gross, David L.

1993-01-01

In order to meet the data research requirements of the Safety, Reliability & Quality Assurance activities at Kennedy Space Center (KSC), a new computer search method for technical data documents was developed. By their very nature, technical documents are partially encrypted because of the author's use of acronyms, abbreviations, and shortcut notations. This problem of computerized searching is compounded at KSC by the volume of documentation that is produced during normal Space Shuttle operations. The Centralized Document Database (CDD) is designed to solve this problem. It provides a common interface to an unlimited number of files of various sizes, with the capability to perform any diversified types and levels of data searches. The heart of the CDD is the nature and capability of its search algorithms. The most complex form of search that the program uses is with the use of a domain-specific database of acronyms, abbreviations, synonyms, and word frequency tables. This database, along with basic sentence parsing, is used to convert a request for information into a relational network. This network is used as a filter on the original document file to determine the most likely locations for the data requested. This type of search will locate information that traditional techniques, (i.e., Boolean structured key-word searching), would not find.

Projected configuration of a coal-fired district heating source on the basis of comparative technical-economical optimization analysis

NASA Astrophysics Data System (ADS)

Tańczuk, Mariusz; Radziewicz, Wojciech; Olszewski, Eligiusz; Skorek, Janusz

2017-10-01

District heating technologies should be efficient, effective and environmentally friendly. The majority of the communal heating systems in Poland produce district hot water in coal-fired boilers. A large number of them are considerably worn out, low-efficient in the summer time and will not comply with forthcoming regulations. One of the possible solution for such plants is repowering with new CHP systems or new boilers fuelled with fuels alternative to coal. Optimisation analysis of the target configuration of municipal heat generating plant is analysed in the paper. The work concerns repowering the existing conventional heat generating plant according to eight different scenarios of the plant configuration meeting technical and environmental requirements forecasted for the year of 2035. The maximum demand for heat of the system supplied by the plant is 185 MW. Taking into account different technical configurations on one side, and different energy and fuel prices on the other side, the comparative cost-benefits analysis of the assumed scenarios has been made. The basic economical index NPV (net present value) has been derived for each analysed scenario and the results have been compared and discussed. It was also claimed that the scenario with CHP based on ICE engines is optimal.

Evaluating the technical feasibility of aflatoxin risk reduction strategies in Africa.

PubMed

Wu, Felicia; Khlangwiset, Pornsri

2010-05-01

Public health interventions must be readily accepted by their target populations to have any meaningful impact and must have financial and infrastructural support to be feasible in the parts of the world where they are most needed. At the same time, these interventions must be assessed for potential unintended consequences, either to the environment or to human health. In this paper, we evaluate the technical feasibility of interventions to control aflatoxin risk, to be potentially deployed in parts of Africa where aflatoxin exposure poses a significant public health concern. We have applied a conceptual framework for feasibility to four interventions, one associated with each of four different stages of aflatoxin risk: biocontrol (pre-harvest), a post-harvest intervention package (post-harvest), NovaSil clay (dietary), and hepatitis B vaccination (clinical). For each intervention, we have assessed the following four components of technical feasibility: (1) characteristics of the basic intervention, (2) characteristics of delivery, (3) requirements on government capacity, and (4) usage characteristics. We propose ways in which feasibility of each intervention is currently high or low from the perspective of adoption in Africa, how public education is crucial for each of these interventions to succeed, and how to align economic incentives to make the interventions more suitable for less developed countries.

Evaluating the technical feasibility of aflatoxin risk reduction strategies in Africa

PubMed Central

Wu, Felicia; Khlangwiset, Pornsri

2010-01-01

Public health interventions must be readily accepted by their target populations to have any meaningful impact, and must have financial and infrastructural support to be feasible in the parts of the world where they are most needed. At the same time, these interventions must be assessed for potential unintended consequences, either to the environment or to human health. In this paper, we evaluate the technical feasibility of interventions to control aflatoxin risk, to be potentially deployed in parts of Africa where aflatoxin exposure poses a significant public health concern. We have applied a conceptual framework for feasibility to four interventions, one associated with each of four different stages of aflatoxin risk: biocontrol (pre-harvest), a post-harvest intervention package (post-harvest), NovaSil clay (dietary), and hepatitis B vaccination (clinical). For each intervention, we have assessed the following four components of technical feasibility: 1) characteristics of the basic intervention, 2) characteristics of delivery, 3) requirements on government capacity, and 4) usage characteristics. We propose ways in which feasibility of each intervention is currently high or low from the perspective of adoption in Africa, how public education is crucial for each of these interventions to succeed, and how to align economic incentives to make the interventions more suitable for less developed countries. PMID:20455160

Propellant injection systems and processes

NASA Technical Reports Server (NTRS)

Ito, Jackson I.

1995-01-01

The previous 'Art of Injector Design' is maturing and merging with the more systematic 'Science of Combustion Device Analysis.' This technology can be based upon observation, correlation, experimentation and ultimately analytical modeling based upon basic engineering principles. This methodology is more systematic and far superior to the historical injector design process of 'Trial and Error' or blindly 'Copying Past Successes.' The benefit of such an approach is to be able to rank candidate design concepts for relative probability of success or technical risk in all the important combustion device design requirements and combustion process development risk categories before committing to an engine development program. Even if a single analytical design concept cannot be developed to predict satisfying all requirements simultaneously, a series of risk mitigation key enabling technologies can be identified for early resolution. Lower cost subscale or laboratory experimentation to demonstrate proof of principle, critical instrumentation requirements, and design discriminating test plans can be developed based on the physical insight provided by these analyses.

Application of Theory to a Technical Assistance Experiment: Development Communication Theory and the Basic Village Education Project in Guatemala.

ERIC Educational Resources Information Center

Kelly, James D.

This paper attempts to assess the influence of development communication theory on the planning and implementation of technical assistance projects in the Third World that utilize mass communication as an agent of change. Like political development theory, communication theory has often been applied in an ethnocentric manner in less developed…

A Study to Determine the Basic Science and Mathematics Topics Most Needed by Engineering Technology Graduates of Wake Technical Institute in Performing Job Duties.

ERIC Educational Resources Information Center

Edwards, Timothy I.; Roberson, Clarence E., Jr.

A survey of 470 graduates of the six engineering technology programs at Wake Technical Institute--Architectural, Chemical, Civil Engineering, Computer, Electronic Engineering, and Industrial Engineering Technologies--and 227 of their employers was conducted in October, 1979, to determine the science and mathematics topics most needed by…

Multi-Cultural Competency-Based Vocational Curricula. Maintenance Mechanics. Multi-Cultural Competency-Based Vocational/Technical Curricula Series.

ERIC Educational Resources Information Center

Hepburn, Larry; Shin, Masako

This document, one of eight in a multi-cultural competency-based vocational/technical curricula series, is on maintenance mechanics. This program is designed to run 40 weeks and cover 5 instructional areas: basic electricity (14 weeks); maintenance and repair of heating (4 weeks); maintenance and repair of air conditioning (12 weeks); maintenance…

1969 Proceedings of the Technical Information Advisory Committee...

ERIC Educational Resources Information Center

National Security Industrial Association, Washington, DC.

The meetings were set up to find ways to overcome the barriers that regulate or reduce the flow of scientific/Technical information and data to the user. Giving the user what he needs, when he needs it, and at a cost he can afford is the basic challenge faced by information services. Obtaining information depends on: (1) personal habits; (2)…

All-Union Conference on Information Retrieval Systems and Automatic Processing of Scientific and Technical Information, 3rd, Moscow, 1967, Transactions. (Selected Articles).

ERIC Educational Resources Information Center

Air Force Systems Command, Wright-Patterson AFB, OH. Foreign Technology Div.

The role and place of the machine in scientific and technical information is explored including: basic trends in the development of information retrieval systems; preparation of engineering and scientific cadres with respect to mechanization and automation of information works; the logic of descriptor retrieval systems; the 'SETKA-3' automated…

Basic Concepts and Definitions for Privacy and Confidentiality in Student Education Records. SLDS Technical Brief 1. NCES 2011-601

ERIC Educational Resources Information Center

National Center for Education Statistics, 2010

2010-01-01

The National Center for Education Statistics (NCES) is launching a new series of Technical Briefs on various aspects of the protection of personally identifiable information in students' education records. While driven by recent events, the principles and practices that are outlined in this series can be applied more generally to personally…

Making Basic Composition Relevant.

ERIC Educational Resources Information Center

Tichenor, Stuart

The technical writing teacher discovers two things about his/her students: they do not like to write and they do not like to read. They are not in the class because they are motivated, but because they must be there as part of a technical or vocational degree. One of the most common complaints about the class is, "I don't need to know how to…

Draft secure medical database standard.

PubMed

Pangalos, George

2002-01-01

Medical database security is a particularly important issue for all Healthcare establishments. Medical information systems are intended to support a wide range of pertinent health issues today, for example: assure the quality of care, support effective management of the health services institutions, monitor and contain the cost of care, implement technology into care without violating social values, ensure the equity and availability of care, preserve humanity despite the proliferation of technology etc.. In this context, medical database security aims primarily to support: high availability, accuracy and consistency of the stored data, the medical professional secrecy and confidentiality, and the protection of the privacy of the patient. These properties, though of technical nature, basically require that the system is actually helpful for medical care and not harmful to patients. These later properties require in turn not only that fundamental ethical principles are not violated by employing database systems, but instead, are effectively enforced by technical means. This document reviews the existing and emerging work on the security of medical database systems. It presents in detail the related problems and requirements related to medical database security. It addresses the problems of medical database security policies, secure design methodologies and implementation techniques. It also describes the current legal framework and regulatory requirements for medical database security. The issue of medical database security guidelines is also examined in detailed. The current national and international efforts in the area are studied. It also gives an overview of the research work in the area. The document also presents in detail the most complete to our knowledge set of security guidelines for the development and operation of medical database systems.

Sustained Assessment Metadata as a Pathway to Trustworthiness of Climate Science Information

NASA Astrophysics Data System (ADS)

Champion, S. M.; Kunkel, K.

2017-12-01

The Sustained Assessment process has produced a suite of climate change reports: The Third National Climate Assessment (NCA3), Regional Surface Climate Conditions in CMIP3 and CMIP5 for the United States: Differences, Similarities, and Implications for the U.S. National Climate Assessment, Impacts of Climate Change on Human Health in the United States: A Scientific Assessment, The State Climate Summaries, as well as the anticipated Climate Science Special Report and Fourth National Climate Assessment. Not only are these groundbreaking reports of climate change science, they are also the first suite of climate science reports to provide access to complex metadata directly connected to the report figures and graphics products. While the basic metadata documentation requirement is federally mandated through a series of federal guidelines as a part of the Information Quality Act, Sustained Assessment products are also deemed Highly Influential Scientific Assessments, which further requires demonstration of the transparency and reproducibility of the content. To meet these requirements, the Technical Support Unit (TSU) for the Sustained Assessment embarked on building a system for not only collecting and documenting metadata to the required standards, but one that also provides consumers unprecedented access to the underlying data and methods. As our process and documentation have evolved, the value of both continue to grow in parallel with the consumer expectation of quality, accessible climate science information. This presentation will detail the how the TSU accomplishes the mandated requirements with their metadata collection and documentation process, as well as the technical solution designed to demonstrate compliance while also providing access to the content for the general public. We will also illustrate how our accessibility platforms guide consumers through the Assessment science at a level of transparency that builds trust and confidence in the report content.

Open-type ferry safety system design for using LNG fuel

NASA Astrophysics Data System (ADS)

Pagonis, D. N.; Livanos, G.; Theotokatos, G.; Peppa, S.; Themelis, N.

2016-12-01

In this feasibility study, we investigate the viability of using Liquefied Natural Gas (LNG) fuel in an open type Ro-Ro passenger ferry and the associated potential challenges with regard to the vessel safety systems. We recommend an appropriate methodology for converting existing ships to run on LNG fuel, discuss all the necessary modifications to the ship's safety systems, and also evaluate the relevant ship evacuation procedures. We outline the basic requirements with which the ship already complies for each safety system and analyze the additional restrictions that must be taken into consideration for the use of LNG fuel. Appropriate actions are recommended. Furthermore, we carry out a hazard identification study. Overall, we clearly demonstrate the technical feasibility of the investigated scenario. Minimal modifications to the ship's safety systems are required to comply with existing safety rules for this specific type of ship.

Ultraprecision finishing of micro-aspherical surface by ultrasonic assisted polishing; Technical Digest

NASA Astrophysics Data System (ADS)

Suzuki, Hirofumi; Kawamori, Ryota; Yamamoto, Yuji; Miyabara, Mitsuru; Okino, Tadashi; Hijikata, Yoshio; Moriwaki, Toshimichi

2005-05-01

Micro aspherical glass lenses are required for electronic devices, optical devices and advanced optical fiber transmission equipments. The glass lenses are manufactured by glass molding method by using micro ceramics dies such as tungsten carbide or silicon carbide (1). Therefore molding dies are most important and they were ground by ultra-precision grinding method with diamond wheel. Recently, the wavelength of used laser is becoming shorter and then the accuracies of the micro molding die are required to be much more precise (2). In this paper, ultrasonic assisted polishing methods/systems were developed in order to finish micro aspherical dies that were ground with micro diamond wheel. In the polishing experiments, the molding die of tungsten carbide was polished with diamond abrasives to test the basic polishing characteristics and the aspheric die was polished with proposed ultrasonic assisted polishing method.

Advanced Q-switched DPSS lasers for ID-card marking

NASA Astrophysics Data System (ADS)

Hertwig, Michael; Paster, Martin; Terbrueggen, Ralf

2008-02-01

Increased homeland security concerns across the world have generated a strong demand for forgery-proof ID documents. Manufacturers currently employ a variety of high technology techniques to produce documents that are difficult to copy. However, production costs and lead times are still a concern when considering any possible manufacturing technology. Laser marking has already emerged as an important tool in the manufacturer's arsenal, and is currently being utilized to produce a variety of documents, such as plastic ID cards, drivers' licenses, health insurance cards and passports. The marks utilized can range from simple barcodes and text to high resolution, true grayscale images. The technical challenges posed by these marking tasks include delivering adequate mark legibility, minimizing substrate burning or charring, accurately reproducing grayscale data, and supporting the required process throughput. This article covers the advantages and basic requirements on laser marking of cards and reviews how laser output parameters affect marking quality, speed and overall process economics.

Accreditation of specialized asthma units for adults in Spain: an applicable experience for the management of difficult-to-control asthma

PubMed Central

Cisneros, Carolina; Díaz-Campos, Rocío Magdalena; Marina, Núria; Melero, Carlos; Padilla, Alicia; Pascual, Silvia; Pinedo, Celia; Trisán, Andrea

2017-01-01

This paper, developed by consensus of staff physicians of accredited asthma units for the management of severe asthma, presents information on the process and requirements for already-existing asthma units to achieve official accreditation by the Spanish Society of Pneumology and Thoracic Surgery (SEPAR). Three levels of specialized asthma care have been established based on available resources, which include specialized units for highly complex asthma, specialized asthma units, and basic asthma units. Regardless of the level of accreditation obtained, the distinction of “excellence” could be granted when more requirements in the areas of provision of care, technical and human resources, training in asthma, and teaching and research activities were met at each level. The Spanish experience in the process of accreditation of specialized asthma units, particularly for the care of patients with difficult-to-control asthma, may be applicable to other health care settings. PMID:28533690

75 FR 6683 - Notice of Proposed Information Collection: Comment Request; Technical Processing Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-10

... Information Collection: Comment Request; Technical Processing Requirements for Multifamily Project Mortgage... information: Title of Proposal: Technical Processing Requirements for Multifamily Project Mortgage Insurance... information collection requirement described below will be submitted to the Office of Management and Budget...

Technical aspects of dental CBCT: state of the art

PubMed Central

Araki, K; Siewerdsen, J H; Thongvigitmanee, S S

2015-01-01

As CBCT is widely used in dental and maxillofacial imaging, it is important for users as well as referring practitioners to understand the basic concepts of this imaging modality. This review covers the technical aspects of each part of the CBCT imaging chain. First, an overview is given of the hardware of a CBCT device. The principles of cone beam image acquisition and image reconstruction are described. Optimization of imaging protocols in CBCT is briefly discussed. Finally, basic and advanced visualization methods are illustrated. Certain topics in these review are applicable to all types of radiographic imaging (e.g. the principle and properties of an X-ray tube), others are specific for dental CBCT imaging (e.g. advanced visualization techniques). PMID:25263643

Intervention complexity--a conceptual framework to inform priority-setting in health.

PubMed Central

Gericke, Christian A.; Kurowski, Christoph; Ranson, M. Kent; Mills, Anne

2005-01-01

Health interventions vary substantially in the degree of effort required to implement them. To some extent this is apparent in their financial cost, but the nature and availability of non-financial resources is often of similar importance. In particular, human resource requirements are frequently a major constraint. We propose a conceptual framework for the analysis of interventions according to their degree of technical complexity; this complements the notion of institutional capacity in considering the feasibility of implementing an intervention. Interventions are categorized into four dimensions: characteristics of the basic intervention; characteristics of delivery; requirements on government capacity; and usage characteristics. The analysis of intervention complexity should lead to a better understanding of supply- and demand-side constraints to scaling up, indicate priorities for further research and development, and can point to potential areas for improvement of specific aspects of each intervention to close the gap between the complexity of an intervention and the capacity to implement it. The framework is illustrated using the examples of scaling up condom social marketing programmes, and the DOTS strategy for tuberculosis control in highly resource-constrained countries. The framework could be used as a tool for policy-makers, planners and programme managers when considering the expansion of existing projects or the introduction of new interventions. Intervention complexity thus complements the considerations of burden of disease, cost-effectiveness, affordability and political feasibility in health policy decision-making. Reducing the technical complexity of interventions will be crucial to meeting the health-related Millennium Development Goals. PMID:15868020

Intervention complexity--a conceptual framework to inform priority-setting in health.

PubMed

Gericke, Christian A; Kurowski, Christoph; Ranson, M Kent; Mills, Anne

2005-04-01

Health interventions vary substantially in the degree of effort required to implement them. To some extent this is apparent in their financial cost, but the nature and availability of non-financial resources is often of similar importance. In particular, human resource requirements are frequently a major constraint. We propose a conceptual framework for the analysis of interventions according to their degree of technical complexity; this complements the notion of institutional capacity in considering the feasibility of implementing an intervention. Interventions are categorized into four dimensions: characteristics of the basic intervention; characteristics of delivery; requirements on government capacity; and usage characteristics. The analysis of intervention complexity should lead to a better understanding of supply- and demand-side constraints to scaling up, indicate priorities for further research and development, and can point to potential areas for improvement of specific aspects of each intervention to close the gap between the complexity of an intervention and the capacity to implement it. The framework is illustrated using the examples of scaling up condom social marketing programmes, and the DOTS strategy for tuberculosis control in highly resource-constrained countries. The framework could be used as a tool for policy-makers, planners and programme managers when considering the expansion of existing projects or the introduction of new interventions. Intervention complexity thus complements the considerations of burden of disease, cost-effectiveness, affordability and political feasibility in health policy decision-making. Reducing the technical complexity of interventions will be crucial to meeting the health-related Millennium Development Goals.

Investigation of a Chaotic Double Pendulum in the Basic Level Physics Teaching Laboratory

ERIC Educational Resources Information Center

Vanko, Peter

2007-01-01

First-year physics students at the Technical University of Budapest carry out a wide range of measurements in the Basic Level Physics Teaching Laboratory. One of the most exciting experiments is the investigation of a chaotic double pendulum by a V-scope, a powerful three-dimensional motion tracking system. After a brief introduction to the…

Basic Education for Adults: Pathways to College and Careers for Washington's Emerging Workforce. Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2015

2015-01-01

This brief describes the Basic Education for Adults (BEdA) programs that bridge the gap between school and work, thereby creating pathways to college and careers for Washington's emerging workforce. BEdA programs teach foundational skills--reading, writing, math, technology and English language--so adults can move through college and into…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 23: Multivibrators. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on multivibrators is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Three lessons are included in the…

Introduction and Progress of APOSOS Project

NASA Astrophysics Data System (ADS)

Zhao, You; Gao, P. Q.; Shen, Ming; Chaudhry, Maqbool A.; Guo, Xiaozhong; Teng, D. P.; Yang, Datao; Yu, Huanhuan; Zhao, Zhe

Asia-Pacific Ground-Based Optical Satellite Observation System (APOSOS) project is based on members of Asia-Pacific Space Cooperation Organization (APSCO). Its aim is to develop a regional or even global satellite tracking network basically composed of optical trackers. The system will be used to track objects of interest or space-debris for the safety of spacecraft launch mission or the intactness of operational satellites. The system will benefit from the distribution of APSCO members and multi-national fund support or technical cooperation. Thus APOSOS will have a potential capability to observe all the satellites orbiting earth with high precision but relatively low cost. This paper will present the introduction, progress and current status of APOSOS project, including: System Requirements Definition, System Main Mission, System Goal, System design, Services and Clients, Organization Framework of Observation Center, Major Function of Observation Center, Establishment of Observation Plan, Format Standard for Exchanging Data, Data Policy, Implementation Schedule, etc.. APOSOS will build a unified surveillance network from observational facilities of member states involved, to utilize the wide geographical distribution advantage of multi-country. It will be operated under the coordination of APSCO observation mission management department. (1)APOSOS should conduct observation missions of specific satellites, space-debris or other space objects of interest, based on requirements of member states. APOSOS should fulfill the basic requirement for satellites observation and tracking missions. And it should also have the potential ability of small debris detection to support collision avoidance planning, which can protect the members high valued space assets. (2)In some particular application, APOSOS would be able to be used for long-term tracking of specific space object of interest, and have the ability of data processing and analysis, so as to provide conjunction assessment, collision probability calculation and avoidance planning for space assets. (3)APOSOS should have the capability of publishing information and sharing data among member states, with the ability to deal with user’s requests for data and mange the data in different levels. (4)APOSOS should have the capability of providing services such as technical consultation, training and science popularization.

38 CFR 61.52 - Threshold requirements for technical assistance grant applications.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Threshold requirements....52 Threshold requirements for technical assistance grant applications. To be eligible for a technical assistance grant, an applicant must meet the following threshold requirements: (a) The application included...

38 CFR 61.52 - Threshold requirements for technical assistance grant applications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2012-07-01 2012-07-01 false Threshold requirements....52 Threshold requirements for technical assistance grant applications. To be eligible for a technical assistance grant, an applicant must meet the following threshold requirements: (a) The application included...

47 CFR 25.214 - Technical requirements for space stations in the Satellite Digital Audio Radio Service and...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 2 2014-10-01 2014-10-01 false Technical requirements for space stations in the Satellite Digital Audio Radio Service and associated terrestrial repeaters. 25.214 Section 25.214... Technical Standards § 25.214 Technical requirements for space stations in the Satellite Digital Audio Radio...

47 CFR 25.214 - Technical requirements for space stations in the satellite digital audio radio service and...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 2 2012-10-01 2012-10-01 false Technical requirements for space stations in the satellite digital audio radio service and associated terrestrial repeaters. 25.214 Section 25.214... Technical Standards § 25.214 Technical requirements for space stations in the satellite digital audio radio...

47 CFR 25.214 - Technical requirements for space stations in the satellite digital audio radio service and...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 2 2011-10-01 2011-10-01 false Technical requirements for space stations in the satellite digital audio radio service and associated terrestrial repeaters. 25.214 Section 25.214... Technical Standards § 25.214 Technical requirements for space stations in the satellite digital audio radio...

47 CFR 25.214 - Technical requirements for space stations in the Satellite Digital Audio Radio Service and...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 2 2013-10-01 2013-10-01 false Technical requirements for space stations in the Satellite Digital Audio Radio Service and associated terrestrial repeaters. 25.214 Section 25.214... Technical Standards § 25.214 Technical requirements for space stations in the Satellite Digital Audio Radio...

47 CFR 25.214 - Technical requirements for space stations in the satellite digital audio radio service and...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Technical requirements for space stations in the satellite digital audio radio service and associated terrestrial repeaters. 25.214 Section 25.214... Technical Standards § 25.214 Technical requirements for space stations in the satellite digital audio radio...

Clarkesville Green Infrastructure Implementation Strategy

EPA Pesticide Factsheets

The report outlines the 2012 technical assistance for Clarkesville, GA to develop a Green Infrastructure Implementation Strategy, which provides the basic building blocks for a green infrastructure plan:

48 CFR 2052.211-70 - Preparation of technical reports.

Code of Federal Regulations, 2014 CFR

2014-10-01

....211-70 Preparation of technical reports. As prescribed at 2011.104-70(a), the contracting officer... Reports (JAN 1993) All technical reports required by Section C and all Technical Progress Reports required... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Preparation of technical...

48 CFR 2052.211-70 - Preparation of technical reports.

Code of Federal Regulations, 2012 CFR

2012-10-01

....211-70 Preparation of technical reports. As prescribed at 2011.104-70(a), the contracting officer... Reports (JAN 1993) All technical reports required by Section C and all Technical Progress Reports required... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Preparation of technical...

48 CFR 2052.211-70 - Preparation of technical reports.

Code of Federal Regulations, 2010 CFR

2010-10-01

....211-70 Preparation of technical reports. As prescribed at 2011.104-70(a), the contracting officer... Reports (JAN 1993) All technical reports required by Section C and all Technical Progress Reports required... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Preparation of technical...

48 CFR 2052.211-70 - Preparation of technical reports.

Code of Federal Regulations, 2013 CFR

2013-10-01

....211-70 Preparation of technical reports. As prescribed at 2011.104-70(a), the contracting officer... Reports (JAN 1993) All technical reports required by Section C and all Technical Progress Reports required... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Preparation of technical...

48 CFR 2052.211-70 - Preparation of technical reports.

Code of Federal Regulations, 2011 CFR

2011-10-01

....211-70 Preparation of technical reports. As prescribed at 2011.104-70(a), the contracting officer... Reports (JAN 1993) All technical reports required by Section C and all Technical Progress Reports required... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Preparation of technical...

Flow Cytometry Scientist | Center for Cancer Research

Cancer.gov

PROGRAM DESCRIPTION The Basic Science Program (BSP) pursues independent, multidisciplinary research in basic and applied molecular biology, immunology, retrovirology, cancer biology, and human genetics. Research efforts and support are an integral part of the Center for Cancer Research (CCR) at the Frederick National Laboratory for Cancer Research (FNLCR). KEY ROLES/RESPONSIBILITIES The Flow Cytometry Core (Flow Core) in the Cancer and Inflammation Program (CIP) is a service core which supports the research efforts of the CCR by providing expertise in the field of flow cytometry (using analyzers and sorters) with the goal of gaining a more thorough understanding of the biology of the immune system, cancer, and inflammation processes. The Flow Core provides service to 12-15 CIP laboratories and more than 22 non-CIP laboratories. Flow core staff provide technical advice on the experimental design of applications, which include immunological phenotyping, cell function assays, and cell cycle analysis. Work is performed per customer requirements, and no independent research is involved. The Flow Cytometry Scientist will be responsible for: Daily management of the Flow Cytometry Core, to include the supervision and guidance of technical staff members Monitor performance of and maintain high dimensional flow cytometer analyzers and cell sorters Operate high dimensional flow cytometer analyzers and cell sorters Provide scientific expertise to the user community and facilitate the development of cutting edge technologies Interact with Flow Core users and customers, and provide technical and scientific advice, and guidance regarding their experiments, including possible collaborations Train staff and scientific end users on the use of flow cytometry in their research, as well as teach them how to operate and troubleshoot the bench-top analyzer instruments Prepare and deliver lectures, as well as one-on-one training sessions, with customers/users Ensure that protocols are up-to-date, and appropriately adhered to Experience with sterile technique and tissue culture

Technical and economic feasibility of development innovative technological solutions for expansion the adjustment range of high-power CCP

NASA Astrophysics Data System (ADS)

Arakelyan, E. K.; Andryushin, A. V.; Burtsev, S. Y.; Andryushin, K. A.

2017-11-01

The analysis of technical and parametric constraints on the adjustment range of highpower CCP and recommended technological solutions in the technical literature for their elimination. Established that in the conditions of toughening the requirements for economy, reliability and maneuverability on the part of the system operator with the participation of CCP in control the frequency and power in the power system, existing methods do not ensure the fulfillment of these requirements. The current situation in the energy sector — the lack of highly manoeuvrable power equipment leads to the need participate in control of power consumption diagrams for all types of power plants, including CCP, although initially they were intended primarily for basic loads. Large-scale research conducted at the department of Automated control systems of technological processes, showed the possibility of a significant expansion of the adjustment range of CCP when it operating in the condensing mode and in the heating mode. The report presents the main results of these research for example the CCP-450 and CCP-450T. Various technological solutions are considered: when CCP in the condensation mode — the use of bypass steam distribution schemes, the transfer of a part of the steam turbine into a low-steam mode; when CCP operation in the heating mode — bypass steam distribution and the transfer CCP to gas turbine unit — power heating plants mode with the transfer the steam turbine to the motor mode. Data on the evaluation of the technical and economic feasibility of the proposed innovative technological solutions are presented in comparison with the methods used to solve this problem, which are used in practice, such as passing through the failures of the electric load graphs by transferring the CCP to the mode of operation with incomplete equipment. When comparing, both the economics, and the maneuverability and reliability of the equipment are considered.

Internet Research: Implications for The Future of Health Care

PubMed Central

Shortliffe, Ted

1999-01-01

The phenomenal growth in Internet usage, largely due to the success of the World Wide Web, has stressed the international networking infrastructure in ways that were never contemplated when the early ARPAnet emerged from research laboratories in the 1970s. Some of the challenges are logistical and legal, and have to do with management of domain names, intellectual-property agreements, and international business activities. Others are technical, resulting both because we are envisioning applications that the current Internet cannot support, and because the existing infrastructure cannot scale to a world in which a huge portion of the world's population is online and individual homes and businesses may have IP addresses for tens of electronic devices, such as appliances, heating systems, or security alarms. In this presentation, I will discuss some of the US research and testbed activities that are currently underway in an effort to respond to the technical challenges. These include the Internet-2 testbed created by a consortium of academic institutions, and the federal government's Next Generation Internet research initiative. I will explain the difference between these two programs and identify some of the technical requirements other than a simple increase in bandwidth that have been identified for the evolving Internet. This will lead to a discussion of the limitations of the current Internet that have constrained its use in health care and that accordingly help to define the networking research agenda that is of greatest importance to the biomedical community. Policy and regulatory issues that arise because of health care's use of the Internet will also be discussed, as will those technical requirements that may be unique to biomedical applications. One goal of the discussion will be to motivate an international discussion of the ways in which the medical informatics community should be engaged in both basic and applied research in the area of networking and the future of the Internet."

Rapid Development: A Content Analysis Comparison of Literature and Purposive Sampling of AFRL Rapid Reaction Projects

DTIC Science & Technology

2011-12-01

systems engineering technical and technical management processes. Technical Planning, Stakeholders Requirements Development, and Architecture Design were...Stakeholder Requirements Definition, Architecture Design and Technical Planning. A purposive sampling of AFRL rapid development program managers and engineers...emphasize one process over another however Architecture Design , Implementation scored higher among Technical Processes. Decision Analysis, Technical

47 CFR 80.273 - Technical requirements for radar equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Technical requirements for radar equipment. 80... Technical requirements for radar equipment. (a) Radar installations on board ships that are required by the Safety Convention or the U.S. Coast Guard to be equipped with radar must comply with the documents...

47 CFR 80.273 - Technical requirements for radar equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Technical requirements for radar equipment. 80... Technical requirements for radar equipment. (a) Radar installations on board ships that are required by the Safety Convention or the U.S. Coast Guard to be equipped with radar must comply with the documents...

Effects of Human Factors in Engineering and Design for Teaching Mathematics: A Comparison Study of Online and Face-to-Face at a Technical College

ERIC Educational Resources Information Center

Mativo, John M.; Hill, Roger B.; Godfrey, Paul W.

2013-01-01

The focus of this study was to examine four characteristics for successful and unsuccessful students enrolled in basic mathematics courses at a technical college. The characteristics, considered to be in part effects of human factors in engineering and design, examined the preferred learning styles, computer information systems competency,…

Time Value of Money and Its Applications in Corporate Finance: A Technical Note on Linking Relationships between Formulas

ERIC Educational Resources Information Center

Chen, Jeng-Hong

2009-01-01

Time Value of Money (TVM) is the most important chapter in the basic corporate finance course. It is imperative to understand TVM formulas because they imply important TVM concepts. Students who really understand TVM concepts and formulas can learn better in chapters of TVM applications. This technical note intends to present more complete TVM…

Passing the Torch by Passing on a Skill: Passing the Torch to the Next Generation is the Intrinsic Reward for Dedicated Technology Teachers

ERIC Educational Resources Information Center

Millson, David; Jerie, Branko

2005-01-01

Motivating students to master the basics in any field is a demanding task. In technical education, while the direct benefit--almost certain, well-paying employment--is obvious, the challenge is to keep students' interest high. Absent that, the technical workforce lacks skilled replenishment, and the possibility of being overtaken by competition…

Prospects for the development of coal-steam plants in Russia

NASA Astrophysics Data System (ADS)

Tumanovskii, A. G.

2017-06-01

Evaluation of the technical state of the modern coal-fired power plants and quality of coal consumed by Russian thermal power plants (TPP) is provided. Measures aimed at improving the economic and environmental performance of operating 150-800 MW coal power units are considered. Ways of efficient use of technical methods of NO x control and electrostatic precipitators' upgrade for improving the efficiency of ash trapping are summarized. Examples of turbine and boiler equipment efficiency upgrading through its deep modernization are presented. The necessity of the development and introduction of new technologies in the coal-fired power industry is shown. Basic technical requirements for a 660-800 MW power unit with the steam conditions of 28 MPa, 600/600°C are listed. Design solutions taking into account features of Russian coal combustion are considered. A field of application of circulating fluidized bed (CFB) boilers and their effectiveness are indicated. The results of development of a new generation coal-fired TPP, including a steam turbine with an increased efficiency of the compartments and disengaging clutch, an elevated steam conditions boiler, and a highly efficient NO x /SO2 and ash particles emission control system are provided. In this case, the resulting ash and slag are not to be sent to the ash dumps and are to be used to a maximum advantage. Technical solutions to improve the efficiency of coal gasification combined cycle plants (CCP) are considered. A trial plant based on a 16 MW gas turbine plant (GTP) and an air-blown gasifier is designed as a prototype of a high-power CCP. The necessity of a state-supported technical reequipment and development program of operating coal-fired power units, as well as putting into production of new generation coal-fired power plants, is noted.

Technical efficiency and resources allocation in university hospitals in Tehran, 2009-2012.

PubMed

Rezapour, Aziz; Ebadifard Azar, Farbod; Yousef Zadeh, Negar; Roumiani, YarAllah; Bagheri Faradonbeh, Saeed

2015-01-01

Assessment of hospitals' performance in achieving its goals is a basic necessity. Measuring the efficiency of hospitals in order to boost resource productivity in healthcare organizations is extremely important. The aim of this study was to measure technical efficiency and determining status of resource allocation in some university hospitals, in Tehran, Iran. This study was conducted in 2012; the research population consisted of all hospitals affiliated to Iran and Tehran medical sciences universities of. Required data, such as human and capital resources information and also production variables (hospital outputs) were collected from data centers of studied hospitals. Data were analyzed using data envelopment analysis (DEA) method, Deap2,1 software; and the stochastic frontier analysis (SFA) method, Frontier 4,1 software. According to DEA method, average of technical, management (pure) and scale efficiency of the studied hospitals during the study period were calculated 0.87, 0.971, and 0.907, respectively. All kinds of efficiency did not follow a fixed trend over the study time and were constantly changing. In the stochastic frontier's production function analysis, the technical efficiency of the studied industry during the study period was estimated to be 0.389. This study represented hospitals with the highest and lowest efficiency. Reference hospitals (more efficient states) were indicated for the inefficient centers. According to the findings, it was found that in the hospitals that do not operate efficiently, there is a capacity to improve the technical efficiency by removing excess inputs without changes in the level of outputs. However, by the optimal allocation of resources in most studied hospitals, very important economy of scale can be achieved.

Technical efficiency and resources allocation in university hospitals in Tehran, 2009-2012

PubMed Central

Rezapour, Aziz; Ebadifard Azar, Farbod; Yousef Zadeh, Negar; Roumiani, YarAllah; Bagheri Faradonbeh, Saeed

2015-01-01

Background: Assessment of hospitals’ performance in achieving its goals is a basic necessity. Measuring the efficiency of hospitals in order to boost resource productivity in healthcare organizations is extremely important. The aim of this study was to measure technical efficiency and determining status of resource allocation in some university hospitals, in Tehran, Iran. Methods: This study was conducted in 2012; the research population consisted of all hospitals affiliated to Iran and Tehran medical sciences universities of. Required data, such as human and capital resources information and also production variables (hospital outputs) were collected from data centers of studied hospitals. Data were analyzed using data envelopment analysis (DEA) method, Deap2,1 software; and the stochastic frontier analysis (SFA) method, Frontier 4,1 software. Results: According to DEA method, average of technical, management (pure) and scale efficiency of the studied hospitals during the study period were calculated 0.87, 0.971, and 0.907, respectively. All kinds of efficiency did not follow a fixed trend over the study time and were constantly changing. In the stochastic frontier's production function analysis, the technical efficiency of the studied industry during the study period was estimated to be 0.389. Conclusion: This study represented hospitals with the highest and lowest efficiency. Reference hospitals (more efficient states) were indicated for the inefficient centers. According to the findings, it was found that in the hospitals that do not operate efficiently, there is a capacity to improve the technical efficiency by removing excess inputs without changes in the level of outputs. However, by the optimal allocation of resources in most studied hospitals, very important economy of scale can be achieved. PMID:26793657

16 CFR 1401.5 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Providing performance and technical data to...: REQUIREMENTS TO PROVIDE THE COMMISSION WITH PERFORMANCE AND TECHNICAL DATA; REQUIREMENTS TO NOTIFY CONSUMERS AT POINT OF PURCHASE OF PERFORMANCE AND TECHNICAL DATA § 1401.5 Providing performance and technical data to...

16 CFR 1401.5 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Providing performance and technical data to...: REQUIREMENTS TO PROVIDE THE COMMISSION WITH PERFORMANCE AND TECHNICAL DATA; REQUIREMENTS TO NOTIFY CONSUMERS AT POINT OF PURCHASE OF PERFORMANCE AND TECHNICAL DATA § 1401.5 Providing performance and technical data to...

16 CFR 1401.5 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Providing performance and technical data to...: REQUIREMENTS TO PROVIDE THE COMMISSION WITH PERFORMANCE AND TECHNICAL DATA; REQUIREMENTS TO NOTIFY CONSUMERS AT POINT OF PURCHASE OF PERFORMANCE AND TECHNICAL DATA § 1401.5 Providing performance and technical data to...

16 CFR 1401.5 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Providing performance and technical data to...: REQUIREMENTS TO PROVIDE THE COMMISSION WITH PERFORMANCE AND TECHNICAL DATA; REQUIREMENTS TO NOTIFY CONSUMERS AT POINT OF PURCHASE OF PERFORMANCE AND TECHNICAL DATA § 1401.5 Providing performance and technical data to...

[The supply chain is everybody's business...].

PubMed

Coulondre, Antoine

2007-05-01

The management of the supply chain is a matter of delicate balance. This is certainly due to its position at the crossroads between suppliers and users requirements, as well as logistic, financial and technical regulations. For a public organisation like EFS, whose annual budget amounts to 697 million euros, there is a lot at stake: supplies represent the second most important item of its budget accounting for 38% of annual expenses. Three quarters of the purchases concern basic activities such as blood collection, testing procedures, transformation and distribution of blood products. The last quarter is spent on more general activities (computer systems, telecommunications...). Professionalisation of the purchasing function has grown since the creation of the government-owned organisation as a single national unit (EFS) in the year 2000. Its consequences can be felt especially in the field of the "core activities". The current stage consists in maintaining close links between all the skills necessary to a high-quality supply chain. The latter will undoubtedly be beneficial to the medical, technical and support departments of EFS, which are the in-house customers to satisfy.

Advanced transportation system studies technical area 2 (TA-2): Heavy lift launch vehicle development. volume 3; Program Cost estimates

NASA Technical Reports Server (NTRS)

McCurry, J. B.

1995-01-01

The purpose of the TA-2 contract was to provide advanced launch vehicle concept definition and analysis to assist NASA in the identification of future launch vehicle requirements. Contracted analysis activities included vehicle sizing and performance analysis, subsystem concept definition, propulsion subsystem definition (foreign and domestic), ground operations and facilities analysis, and life cycle cost estimation. The basic period of performance of the TA-2 contract was from May 1992 through May 1993. No-cost extensions were exercised on the contract from June 1993 through July 1995. This document is part of the final report for the TA-2 contract. The final report consists of three volumes: Volume 1 is the Executive Summary, Volume 2 is Technical Results, and Volume 3 is Program Cost Estimates. The document-at-hand, Volume 3, provides a work breakdown structure dictionary, user's guide for the parametric life cycle cost estimation tool, and final report developed by ECON, Inc., under subcontract to Lockheed Martin on TA-2 for the analysis of heavy lift launch vehicle concepts.

AeroMACS system characterization and demonstrations

NASA Astrophysics Data System (ADS)

Kerczewski, R. J.; Apaza, R. D.; Dimond, R. P.

This The Aeronautical Mobile Airport Communications System (AeroMACS) is being developed to provide a new broadband wireless communications capability for safety critical communications in the airport surface domain, providing connectivity to aircraft and other ground vehicles as well as connections between other critical airport fixed assets. AeroMACS development has progressed from requirements definition through technology definition, prototype deployment and testing, and now into national and international standards development. The first prototype AeroMACS system has been deployed at the Cleveland Hopkins International Airport (CLE) and the adjacent NASA Glenn Research Center (GRC). During the past three years, extensive technical testing has taken place to characterize the performance of the AeroMACS prototype and provide technical support for the standards development process. The testing has characterized AeroMACS link and network performance over a variety of conditions for both fixed and mobile data transmission and has included basic system performance testing and fixed and mobile applications testing. This paper provides a summary of the AeroMACS performance testing and the status of standardization activities that the testing supports.

AeroMACS System Characterization and Demonstrations

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.; Apaza, Rafael D.; Dimond, Robert P.

2013-01-01

This The Aeronautical Mobile Airport Communications System (AeroMACS) is being developed to provide a new broadband wireless communications capability for safety critical communications in the airport surface domain, providing connectivity to aircraft and other ground vehicles as well as connections between other critical airport fixed assets. AeroMACS development has progressed from requirements definition through technology definition, prototype deployment and testing, and now into national and international standards development. The first prototype AeroMACS system has been deployed at the Cleveland Hopkins International Airport (CLE) and the adjacent NASA Glenn Research Center (GRC). During the past 3 years, extensive technical testing has taken place to characterize the performance of the AeroMACS prototype and provide technical support for the standards development process. The testing has characterized AeroMACS link and network performance over a variety of conditions for both fixed and mobile data transmission and has included basic system performance testing and fixed and mobile applications testing. This paper provides a summary of the AeroMACS performance testing and the status of standardization activities that the testing supports.

AeroMACS System Characterization and Demonstrations

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.; Apaza, Rafael D.; Dimond, Robert P.

2013-01-01

The Aeronautical Mobile Airport Communications System (AeroMACS) is being developed to provide a new broadband wireless communications capability for safety critical communications in the airport surface domain, providing connectivity to aircraft and other ground vehicles as well as connections between other critical airport fixed assets. AeroMACS development has progressed from requirements definition through technology definition, prototype deployment and testing, and now into national and international standards development. The first prototype AeroMACS system has been deployed at the Cleveland Hopkins International Airport (CLE) and the adjacent NASA Glenn Research Center (GRC). During the past three years, extensive technical testing has taken place to characterize the performance of the AeroMACS prototype and provide technical support for the standards development process. The testing has characterized AeroMACS link and network performance over a variety of conditions for both fixed and mobile data transmission and has included basic system performance testing and fixed and mobile applications testing. This paper provides a summary of the AeroMACS performance testing and the status of standardization activities that the testing supports.

Technical report analysis and design: Study of solid rocket motors for a space shuttle booster, volume 2, book 1, supplement 1

NASA Technical Reports Server (NTRS)

1972-01-01

An analysis and design effort was conducted as part of the study of solid rocket motor for a space shuttle booster. The 156-inch-diameter, parallel burn solid rocket motor was selected as its baseline because it is transportable and is the most cost-effective, reliable system that has been developed and demonstrated. The basic approach was to concentrate on the selected baseline design, and to draw from the baseline sufficient data to describe the alternate approaches also studied. The following conclusions were reached with respect to technical feasibility of the use of solid rocket booster motors for the space shuttle vehicle: (1) The 156-inch, parallel-burn baseline SRM design meets NASA's study requirements while incorporating conservative safety factors. (2) The solid rocket motor booster represents a cost-effective approach. (3) Baseline costs are conservative and are based on a demonstrated design. (4) Recovery and reuse are feasible and offer substantial cost savings. (5) Abort can be accomplished successfully. (6) Ecological effects are acceptable.

47 CFR 15.15 - General technical requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false General technical requirements. 15.15 Section 15.15 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES General § 15.15 General technical requirements. (a) An intentional or unintentional radiator shall be...

47 CFR 80.659 - Technical requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Technical requirements. 80.659 Section 80.659 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Maritime Support Stations § 80.659 Technical requirements. The authorized frequency...

Optimization of paper bridge loading for 2-DE analysis in the basic pH region: application to the mitochondrial subproteome.

PubMed

Kane, Lesley A; Yung, Christina K; Agnetti, Giulio; Neverova, Irina; Van Eyk, Jennifer E

2006-11-01

Separation of basic proteins with 2-DE presents technical challenges involving protein precipitation, load limitations, and streaking. Cardiac mitochondria are enriched in basic proteins and difficult to resolve by 2-DE. We investigated two methods, cup and paper bridge, for sample loading of this subproteome into the basic range (pH 6-11) gels. Paper bridge loading consistently produced improved resolution of both analytical and preparative protein loads. A unique benefit of this technique is that proteins retained in the paper bridge after loading basic gels can be reloaded onto lower pH gradients (pH 4-7), allowing valued samples to be analyzed on multiple pH ranges.

9 CFR 351.17 - Identification required.

Code of Federal Regulations, 2012 CFR

2012-01-01

... INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Transportation and Exportation of Certified Technical Animal Fat § 351.17 Identification required. Certified technical animal fats... certified plants shall be accompanied by MP Form 85 (Declaration to Accompany Technical Animal Fats Between...

9 CFR 351.17 - Identification required.

Code of Federal Regulations, 2010 CFR

2010-01-01

... INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Transportation and Exportation of Certified Technical Animal Fat § 351.17 Identification required. Certified technical animal fats... certified plants shall be accompanied by MP Form 85 (Declaration to Accompany Technical Animal Fats Between...

9 CFR 351.17 - Identification required.

Code of Federal Regulations, 2013 CFR

2013-01-01

... INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Transportation and Exportation of Certified Technical Animal Fat § 351.17 Identification required. Certified technical animal fats... certified plants shall be accompanied by MP Form 85 (Declaration to Accompany Technical Animal Fats Between...

9 CFR 351.17 - Identification required.

Code of Federal Regulations, 2011 CFR

2011-01-01

... INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Transportation and Exportation of Certified Technical Animal Fat § 351.17 Identification required. Certified technical animal fats... certified plants shall be accompanied by MP Form 85 (Declaration to Accompany Technical Animal Fats Between...

9 CFR 351.17 - Identification required.

Code of Federal Regulations, 2014 CFR

2014-01-01

... INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Transportation and Exportation of Certified Technical Animal Fat § 351.17 Identification required. Certified technical animal fats... certified plants shall be accompanied by MP Form 85 (Declaration to Accompany Technical Animal Fats Between...

Documentation as Problem Solving for Literacy Outreach Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

2004-07-06

Age-appropriate technical writing lessons for underperforming high-school students can offer them an innovative, ''authentic'' way to improve how they read and write. Thus the techniques and principles of effective technical communication routinely applied at work also provide a positive response to one of today's great educational challenges. This workshop shows participants how to (1) introduce English and science teachers to the value of technical writing as a response to school literacy problems, (2) prepare plausible practice exercises to help students improve their basic literacy, and (3) recognize and respond to known literacy outreach pitfalls. Every effective literacy outreach project basedmore » on technical writing needs to address four key problems.« less

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 34: Linear Integrated Circuits. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on linear integrated circuits is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Two lessons are included in…

Welding As Science: Applying Basic Engineering Principles to the Discipline

NASA Technical Reports Server (NTRS)

Nunes, A. C., Jr.

2010-01-01

This Technical Memorandum provides sample problems illustrating ways in which basic engineering science has been applied to the discipline of welding. Perhaps inferences may be drawn regarding optimal approaches to particular welding problems, as well as for the optimal education for welding engineers. Perhaps also some readers may be attracted to the science(s) of welding and may make worthwhile contributions to the discipline.

Risk communication basics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corrado, P.G.

In low-trust, high-concern situations, 50% of your credibility comes from perceived empathy and caring, demonstrated in the first 30 s you come in contact with someone. There is no second chance for a first impression. These and other principles contained in this paper provide you with a basic level of understanding of risk communication. The principles identified are time-tested caveats and will assist you in effectively communicating technical information.

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 33: Special Devices. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on special devices is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Four lessons are included in the…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 25: Special Devices. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on special devices is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Two lessons are included in the module:…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 30: Intermediate Power Supplies. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on intermediate power supplies is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Four lessons are included…

[Analysis of effect of prevention and control technique training of human important parasitic diseases in Jiangsu Province in 2017].

PubMed

Bi-Xian, Ni; Xiang-Zhen, Xu; Xiao-Ting, Wang; Ming-Xue, Sheng; Yang, Dai; Xiao-Lin, Jin

2017-07-24

To evaluate the effect of the prevention and control technique training of human important parasitic diseases for basic professional and technical personnel in Jiangsu Province in 2017. A workshop including theory courses and practical operations was carried out for the basic professional and technical personnel. At the end of the workshop, the effects were evaluated through the theoretical and microscopic examinations. There were 132 trainees from 13 cities, and all of them took part in the final examinations. The average score of total was 118.36. There were significant differences among different regions ( χ 2 = 13.38, P < 0.01). The pass rate of the theory test was 92.4% with the average score of 79.05. There were significant differences of theory scores among different regions ( χ 2 =14.51, P < 0.01). The theory score of Northern Jiangsu Province was significantly higher than the scores of Southern and Central Jiangsu Province ( P < 0.001, P = 0.009). The pass rate of microscopic examinations was 89.4% with the average score of 39.32. There was no significant difference of micro-scopic examination scores among different regions ( F = 2.37, P = 0.09). Among the total 7 species, the detection rate of Paragonimus westermani was the highest (75％) and the rates of Schistosoma japonicum and Fasciolopsis buski were only 51.5％ and 54.5% respectively. The detection rates of eggs of Trichuris trichiura , unfertilized Ascaris lumbricoides , Clonorchis sinensis and Taenia solium were 71.2%, 65.9%, 72.7% and 72.0% respectively. The training course has promoted the capability of prevention and control of parasitic diseases for basic technical personnel. Also it provides the technical supports for parasitic disease monitoring, control and risk assessment in the next step.

13 CFR 306.2 - Award requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... TRAINING, RESEARCH AND TECHNICAL ASSISTANCE INVESTMENTS Local and National Technical Assistance § 306.2 Award requirements. EDA selects Projects for Local and National Technical Assistance Investments in...

78 FR 64146 - 30-Day Notice of Proposed Information Collection: Technical Processing Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... Information Collection: Technical Processing Requirements for Multifamily Project Mortgage Insurance AGENCY: Office of the Chief Information Officer, HUD. ACTION: Notice. SUMMARY: HUD has submitted the proposed... Information Collection Title of Information Collection: Technical Processing Requirements for Multifamily...

16 CFR § 1401.5 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Providing performance and technical data to...: REQUIREMENTS TO PROVIDE THE COMMISSION WITH PERFORMANCE AND TECHNICAL DATA; REQUIREMENTS TO NOTIFY CONSUMERS AT POINT OF PURCHASE OF PERFORMANCE AND TECHNICAL DATA § 1401.5 Providing performance and technical data to...

Progress in Emission Efficiency of Organic Light-Emitting Diodes: Basic Understanding and Its Technical Application

NASA Astrophysics Data System (ADS)

Tsutsui, Tetsuo; Takada, Noriyuki

2013-11-01

The technical history of when and how the basic understanding of the emission efficiency of organic light-emitting diodes (OLEDs) was established over the last 50 years is described. At first, our understanding of emission efficiency in single-crystal and thin-film electroluminescence (EL) devices in the early stages before the Eastman-Kodak breakthrough, that is, the introduction of the concept of multilayer structures, is examined. Then our contemplation travels from the Eastman-Kodak breakthrough towards the presently widely accepted concept of emission efficiency. The essential issues concerning the emission efficiency of OLEDs are summarized to help readers to obtain a common understanding of OLED efficiency problems, and detailed discussions on the primary factors that determine emission efficiency are given. Finally, some comments on remaining issues are presented.

Drug Abuse and Drug Abuse Research. The Third Triennial Report to Congress from the Secretary, Department of Health and Human Services.

ERIC Educational Resources Information Center

National Inst. on Drug Abuse (DHHS/PHS), Rockville, MD.

This report summarizes changes that have occurred in understanding of the health implications of the use and abuse of illegal and legal drugs as a result of research since 1986. It is noted that wherever possible, research findings have been summarized in non-technical language. Some technical material is included because of its basic importance…

Information Hang-Ups; Problems Encountered by Users of the Technical Information Services Offered by DDC and CFSTI, with Recommendations for the Future.

ERIC Educational Resources Information Center

Committee of DDC Users in the Greater Washington, DC. Area, Washington, DC.

A change in policy of the Defense Documentation Center (DDC) with regard to supplying hard copy and/or microforms of reports caused problems to users of the DDC Technical Report Service. Discussions among users of the service, a questionnaire survey and committee reports summarized basic user concerns, provided selected statistics and a look at…

JPRS Report, Science & Technology, USSR: Science and Technology Policy.

DTIC Science & Technology

1988-03-03

accordance with the Kazakhstan Regional Scientific Research Program, which is called upon to unite scientific development of a basic and applied nature...Resources for 1986-1990 and the Period to 2000." The institute is a part of the union Avtogennyye protsessy Scientific Technical Complex and the...republic Tsvetnaya metallurgiya Scientific Technical Complex and is participating in the work of the creative youth collective for the automation of

Genetically engineered pigs as models for human disease

PubMed Central

Perleberg, Carolin; Kind, Alexander

2018-01-01

ABSTRACT Genetically modified animals are vital for gaining a proper understanding of disease mechanisms. Mice have long been the mainstay of basic research into a wide variety of diseases but are not always the most suitable means of translating basic knowledge into clinical application. The shortcomings of rodent preclinical studies are widely recognised, and regulatory agencies around the world now require preclinical trial data from nonrodent species. Pigs are well suited to biomedical research, sharing many similarities with humans, including body size, anatomical features, physiology and pathophysiology, and they already play an important role in translational studies. This role is set to increase as advanced genetic techniques simplify the generation of pigs with precisely tailored modifications designed to replicate lesions responsible for human disease. This article provides an overview of the most promising and clinically relevant genetically modified porcine models of human disease for translational biomedical research, including cardiovascular diseases, cancers, diabetes mellitus, Alzheimer's disease, cystic fibrosis and Duchenne muscular dystrophy. We briefly summarise the technologies involved and consider the future impact of recent technical advances. PMID:29419487

Automation of Tooling Backup and Cutter Selection for Engineering Production

NASA Astrophysics Data System (ADS)

Terekhov, M. V.; Averchenkov, V. I.; Reutov, A. A.; Handozhko, A. V.

2017-01-01

This paper reports the analysis of a tool support procedure for mechanical engineering and basic trends in the automation of this field are revealed. The system of technical-organizational measures directed at the formation, management and development of the tool stock and a high degree of technological readiness of manufacturing are described. The problems of an automated optimum cutter selection are considered. A mathematical support for a choice of cutters with through-away tips is described. A simulator for the description of combined cutters is presented. Basic criteria defining cutter choice are established. The problem of a multi-criterion fuzzy estimation of alternatives at different significance of choice criteria is solved. The criterion significance ranking at the parameter choice of cutter plates and tool supports is carried out. A set of estimations of cutter plate forms and other cutter parameters taking into account a relative significance of criteria is defined. The application of a decisive rule in the choice of an alternative required is described, which consists in the definition of the intersection of sets of alternative estimations.

78 FR 65695 - 30-Day Notice of Proposed Information Collection: Technical Processing Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... Information Collection: Technical Processing Requirements for Multifamily Project Mortgage Insurance AGENCY: Office of the Chief Information Officer, HUD. ACTION: Correction, notice. SUMMARY: On October 25, 2013 at... Collection Title of Information Collection: Technical Processing Requirements for Multifamily Project...

47 CFR 15.517 - Technical requirements for indoor UWB systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Technical requirements for indoor UWB systems. 15.517 Section 15.517 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES Ultra-Wideband Operation § 15.517 Technical requirements for indoor UWB systems. (a) Operation...

47 CFR 15.511 - Technical requirements for surveillance systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 1 2013-10-01 2013-10-01 false Technical requirements for surveillance systems... DEVICES Ultra-Wideband Operation § 15.511 Technical requirements for surveillance systems. (a) The UWB... surveillance systems operated by law enforcement, fire or emergency rescue organizations or by manufacturers...

47 CFR 15.511 - Technical requirements for surveillance systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 1 2012-10-01 2012-10-01 false Technical requirements for surveillance systems... DEVICES Ultra-Wideband Operation § 15.511 Technical requirements for surveillance systems. (a) The UWB... surveillance systems operated by law enforcement, fire or emergency rescue organizations or by manufacturers...

47 CFR 15.511 - Technical requirements for surveillance systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 1 2011-10-01 2011-10-01 false Technical requirements for surveillance systems... DEVICES Ultra-Wideband Operation § 15.511 Technical requirements for surveillance systems. (a) The UWB... surveillance systems operated by law enforcement, fire or emergency rescue organizations or by manufacturers...

47 CFR 15.511 - Technical requirements for surveillance systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Technical requirements for surveillance systems... DEVICES Ultra-Wideband Operation § 15.511 Technical requirements for surveillance systems. (a) The UWB... surveillance systems operated by law enforcement, fire or emergency rescue organizations or by manufacturers...

47 CFR 15.511 - Technical requirements for surveillance systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 1 2014-10-01 2014-10-01 false Technical requirements for surveillance systems... DEVICES Ultra-Wideband Operation § 15.511 Technical requirements for surveillance systems. (a) The UWB... surveillance systems operated by law enforcement, fire or emergency rescue organizations or by manufacturers...

30 CFR 7.404 - Technical requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Technical requirements. 7.404 Section 7.404 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND... Cable Splice Kits § 7.404 Technical requirements. (a) Electric cables and splices shall be flame...

Review of PREPA Technical Requirements for Interconnecting Wind and Solar Generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gevorgian, Vahan; Booth, Sarah

2013-11-01

The Puerto Rico Electric Power Authority developed the minimum technical requirements for interconnection of wind turbine generation and photovoltaic power plants. NREL has conducted a review of these requirements based on generic technical aspects and electrical characteristics of wind and photovoltaic power plants, and on existing requirements from other utilities (both U.S. and European).

Glucose Biosensors: An Overview of Use in Clinical Practice

PubMed Central

Yoo, Eun-Hyung; Lee, Soo-Youn

2010-01-01

Blood glucose monitoring has been established as a valuable tool in the management of diabetes. Since maintaining normal blood glucose levels is recommended, a series of suitable glucose biosensors have been developed. During the last 50 years, glucose biosensor technology including point-of-care devices, continuous glucose monitoring systems and noninvasive glucose monitoring systems has been significantly improved. However, there continues to be several challenges related to the achievement of accurate and reliable glucose monitoring. Further technical improvements in glucose biosensors, standardization of the analytical goals for their performance, and continuously assessing and training lay users are required. This article reviews the brief history, basic principles, analytical performance, and the present status of glucose biosensors in the clinical practice. PMID:22399892

Dynamic Segmentation Of Behavior Patterns Based On Quantity Value Movement Using Fuzzy Subtractive Clustering Method

NASA Astrophysics Data System (ADS)

Sangadji, Iriansyah; Arvio, Yozika; Indrianto

2018-03-01

to understand by analyzing the pattern of changes in value movements that can dynamically vary over a given period with relative accuracy, an equipment is required based on the utilization of technical working principles or specific analytical method. This will affect the level of validity of the output that will occur from this system. Subtractive clustering is based on the density (potential) size of data points in a space (variable). The basic concept of subtractive clustering is to determine the regions in a variable that has high potential for the surrounding points. In this paper result is segmentation of behavior pattern based on quantity value movement. It shows the number of clusters is formed and that has many members.

Murine macrophages: a technical approach.

PubMed

Martinez-Pomares, Luisa; Gordon, Siamon

2008-01-01

In this chapter, we describe current protocols used for the characterization of macrophages (MPhi) in mouse tissues and in cell suspensions from spleen and lymph nodes. Also, we include a brief description of a complementary approach: culture of primary MPhi. Although culture MPhi are extremely useful for analysing the basic biology of MPhi and their receptors, it should not be forgotten that the term MPhi encompasses a wide range of different types of cells with phenotypic characteristics dependent on their activation state and tissue of origin. In our view, there is no perfect MPhi marker and analysis of the expression profile of several markers, and functional studies are required to make an informed guess of the cellular characteristics and function of the MPhi population of interest.

Shuttle/TDRSS Ku-band downlink study

NASA Technical Reports Server (NTRS)

Meyer, R.

1976-01-01

Assessing the adequacy of the baseline signal design approach, developing performance specifications for the return link hardware, and performing detailed design and parameter optimization tasks was accomplished by completing five specific study tasks. The results of these tasks show that the basic signal structure design is sound and that the goals can be met. Constraints placed on return link hardware by this structure allow reasonable specifications to be written so that no extreme technical risk areas in equipment design are foreseen. A third channel can be added to the PM mode without seriously degrading the other services. The feasibility of using only a PM mode was shown to exist, however, this will require use of some digital TV transmission techniques. Each task and its results are summarized.

Single crystal diamond lapping procedure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grayson, R.A.

A facility capable of resharpening quality cutting edges on single crystal diamond cutting tools was needed as the demand in precision machining of special optical surfaces became a common occurrence here at Lawrence Livermore National Laboratory. A specially constructed lapping machine using an air bearing spindle was built to achieve the required edge quality. The basic design for this lap was taken out of a technical report by W.L. Duke and R.T. Lovell of Oak Ridge Y-12 Plant Union Carbide Corp. We have also purchased two commercially built lapping machines recommended to us by Mr. Cory A. Knottenbelt, formerly ofmore » R.C.A. Diamond Lapping Facility, in Indianapolis, Indiana, now doing state-of-the-art polishing and relapping at LLNL facilities.« less

Development and application of basis database for materials life cycle assessment in china

NASA Astrophysics Data System (ADS)

Li, Xiaoqing; Gong, Xianzheng; Liu, Yu

2017-03-01

As the data intensive method, high quality environmental burden data is an important premise of carrying out materials life cycle assessment (MLCA), and the reliability of data directly influences the reliability of the assessment results and its application performance. Therefore, building Chinese MLCA database is the basic data needs and technical supports for carrying out and improving LCA practice. Firstly, some new progress on database which related to materials life cycle assessment research and development are introduced. Secondly, according to requirement of ISO 14040 series standards, the database framework and main datasets of the materials life cycle assessment are studied. Thirdly, MLCA data platform based on big data is developed. Finally, the future research works were proposed and discussed.

Building Science-Relevant Literacy with Technical Writing in High School

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

2006-06-02

By drawing on the in-class work of an on-going literacy outreach project, this paper explains how well-chosen technical writing activities can earn time in high-school science courses by enabling underperforming students (including ESL students) to learn science more effectively. We adapted basic research-based text-design and usability techniques into age-appropriate exercises and cases using the cognitive apprenticeship approach. This enabled high-school students, aided by explicit guidelines, to build their cognitive maturity, learn how to craft good instructions and descriptions, and apply those skills to better note taking and technical talks in their science classes.

Fiberoptic characteristics for extreme operating environments

NASA Technical Reports Server (NTRS)

Delcher, R. C.

1992-01-01

Fiberoptics could offer several major benefits for cryogenic liquid-fueled rocket engines, including lightning immunity, weight reduction, and the possibility of implementing a number of new measurements for engine condition monitoring. The technical feasibility of using fiberoptics in the severe environments posed by cryogenic liquid-fueled rocket engines was determined. The issues of importance and subsequent requirements for this use of fiberoptics were compiled. These included temperature ranges, moisture embrittlement succeptability, and the ability to withstand extreme shock and vibration levels. Different types of optical fibers were evaluated and several types of optical fibers' ability to withstand use in cryogenic liquid-fueled rocket engines was demonstrated through environmental testing of samples. This testing included: cold-bend testing, moisture embrittlement testing, temperature cycling, temperature extremes testing, vibration testing, and shock testing. Three of five fiber samples withstood the tests to a level proving feasibility, and two of these remained intact in all six of the tests. A fiberoptic bundle was also tested, and completed testing without breakage. Preliminary cabling and harnessing for fiber protection was also demonstrated. According to cable manufacturers, the successful -300 F cold bend, vibration, and shock tests are the first instance of any major fiberoptic cable testing below roughly -55 F. This program has demonstrated the basic technical feasibility of implementing optical fibers on cryogenic liquid-fueled rocket engines, and a development plan is included highlighting requirements and issues for such an implementation.

Design and verification of bituminous mixtures with the increased content of reclaimed asphalt pavement

NASA Astrophysics Data System (ADS)

Bańkowski, Wojciech; Król, Jan; Gałązka, Karol; Liphardt, Adam; Horodecka, Renata

2018-05-01

Recycling of bituminous pavements is an issue increasingly being discussed in Poland. The analysis of domestic and foreign experience indicates a need to develop this technology in our country, in particular the hot feeding and production technologies. Various steps are being taken in this direction, including research projects. One of them is the InnGA project entitled: “Reclaimed asphalt pavement: Innovative technology of bituminous mixtures using material from reclaimed asphalt pavement”. The paper presents the results of research involving the design of bituminous mixtures in accordance with the required properties and in excess of the content of reclaimed asphalt permitted by the technical guidelines. It presents selected bituminous mixtures with the content of RAP of up to 50% and the results of tests from verification of industrial production of those mixtures. The article discusses the details of the design process of mixtures with a high content of reclaimed asphalt, the carried out production tests and discusses the results of tests under the verification of industrial production. Testing included basic tests according to the Polish technical requirements of WT- 2 and the extended functional testing. The conducted tests and analyses helped to determine the usefulness of the developed bituminous mixtures for use in experimental sections and confirmed the possibility of using an increased amount of reclaimed asphalt up to 50% in mixtures intended for construction of national roads.

FY08 Engineering Research and Technology Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Minichino, C; McNichols, D

2009-02-24

This report summarizes the core research, development, and technology accomplishments in Lawrence Livermore National Laboratory's Engineering Directorate for FY2008. These efforts exemplify Engineering's more than 50-year history of developing and applying the technologies needed to support the Laboratory's national security missions. A partner in every major program and project at the Laboratory throughout its existence, Engineering has prepared for this role with a skilled workforce and technical resources developed through both internal and external venues. These accomplishments embody Engineering's mission: 'Enable program success today and ensure the Laboratory's vitality tomorrow.' Engineering's mission is carried out through basic research and technologymore » development. Research is the vehicle for creating competencies that are cutting-edge, or require discovery-class groundwork to be fully understood. Our technology efforts are discipline-oriented, preparing research breakthroughs for broader application to a variety of Laboratory needs. The term commonly used for technology-based projects is 'reduction to practice.' As we pursue this two-pronged approach, an enormous range of technological capabilities result. This report combines our work in research and technology into one volume, organized into thematic technical areas: Engineering Modeling and Simulation; Measurement Technologies; Micro/Nano-Devices and Structures; Engineering Systems for Knowledge and Inference; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but also anticipate the breakthrough engineering innovations that will be needed in the future.« less

47 CFR 15.513 - Technical requirements for medical imaging systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Technical requirements for medical imaging systems. 15.513 Section 15.513 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES Ultra-Wideband Operation § 15.513 Technical requirements for medical imaging systems. (a) The UWB...

77 FR 29247 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-17

...). ACTION: Final rule; technical amendments. SUMMARY: This final rule makes technical amendments to Federal... advanced air bag requirements. As written now, the general warning label requirements contain an explicit... equipment requirements for restraint systems. This document makes technical amendments to several of the...

75 FR 18505 - International Cooperation on Harmonisation of Technical Requirements for Registration of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-12

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-D-0165] International Cooperation on Harmonisation of Technical Requirements for Registration of Veterinary Medicinal... veterinary use by the International Cooperation on Harmonisation of Technical Requirements for Registration...

Geologic and hydrogeologic framework of the Espa?ola basin -- Proceedings of the 5th annual Espa?ola basin workshop, Santa Fe, New Mexico, March 7-8, 2006

USGS Publications Warehouse

McKinney, Kevin C.

2006-01-01

This report presents abstracts of technical studies that are focused on the hydrogeologic framework of the Espa?ola basin, a major subbasin of the Cenozoic Rio Grande rift. The Rio Grande, Rio Chama, Santa Fe River, and their tributaries carry important surface water in the Espa?ola basin. Sediments and interbedded volcanic rocks fill the Espa?ola basin and form extensive aquifer systems for ground water. Surface and ground water provide the principal sources of water for most residents of the basin, including people in the cities of Santa Fe, Espa?ola, and Los Alamos as well as Native Americans in several Pueblos. The abstracts describe results of technical studies that were presented either as poster exhibits or oral presentations at the fifth-annual Espa?ola basin workshop, held March 7-8 of 2006 in Santa Fe, New Mexico. The principal goal of this workshop was to share information about ongoing studies. The Espa?ola basin workshop was hosted by the Espa?ola basin technical advisory group (EBTAG) and sponsored by the U.S. Geological Survey, the New Mexico Bureau of Geology and Mineral Resources, and the Water Research Technical Assistance Office of Los Alamos National Laboratory. Abstracts in this report have been grouped into six information themes: Basic Water Data, Water Quality and Water Chemistry, Water Balance and Stream/Aquifer Interaction, Data Integration and Hydrologic Model Testing, Three-Dimensional Hydrogeological Architecture, and Geologic Framework. Abstracts submitted by U.S. Geological Survey authors in this report have had their technical content peer reviewed before they were included in the report. Technical reviews were not required for abstracts submitted by authors outside the USGS, although most did receive peer reviews within their originating agencies. Taken together, the abstracts in this report provide a view of the current status of hydrogeologic research within the Espa?ola basin.

Evolution of the Lunar Receiving Laboratory to the Astromaterial Sample Curation Facility: Technical Tensions Between Containment and Cleanliness, Between Particulate and Organic Cleanliness

NASA Technical Reports Server (NTRS)

Allton, J. H.; Zeigler, R. A.; Calaway, M. J.

2016-01-01

The Lunar Receiving Laboratory (LRL) was planned and constructed in the 1960s to support the Apollo program in the context of landing on the Moon and safely returning humans. The enduring science return from that effort is a result of careful curation of planetary materials. Technical decisions for the first facility included sample handling environment (vacuum vs inert gas), and instruments for making basic sample assessment, but the most difficult decision, and most visible, was stringent biosafety vs ultra-clean sample handling. Biosafety required handling of samples in negative pressure gloveboxes and rooms for containment and use of sterilizing protocols and animal/plant models for hazard assessment. Ultra-clean sample handling worked best in positive pressure nitrogen environment gloveboxes in positive pressure rooms, using cleanable tools of tightly controlled composition. The requirements for these two objectives were so different, that the solution was to design and build a new facility for specific purpose of preserving the scientific integrity of the samples. The resulting Lunar Curatorial Facility was designed and constructed, from 1972-1979, with advice and oversight by a very active committee comprised of lunar sample scientists. The high precision analyses required for planetary science are enabled by stringent contamination control of trace elements in the materials and protocols of construction (e.g., trace element screening for paint and flooring materials) and the equipment used in sample handling and storage. As other astromaterials, especially small particles and atoms, were added to the collections curated, the technical tension between particulate cleanliness and organic cleanliness was addressed in more detail. Techniques for minimizing particulate contamination in sample handling environments use high efficiency air filtering techniques typically requiring organic sealants which offgas. Protocols for reducing adventitious carbon on sample handling surfaces often generate particles. Further work is needed to achieve both minimal particulate and adventitious carbon contamination. This paper will discuss these facility topics and others in the historical context of nearly 50 years' curation experience for lunar rocks and regolith, meteorites, cosmic dust, comet particles, solar wind atoms, and asteroid particles at Johnson Space Center.

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics Individualized Learning System. CANTRAC A-100-0010. Module Eleven: Capacitance. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on capacitance is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Seven lessons are included in the module:…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics Individualized Learning System. CANTRAC A-100-0010. Module Two: Voltage. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on voltage is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Six lessons are included in the module: (1)…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics Individualized Learning System. CANTRAC A-100-0010. Module Ten: Transformers. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on transformers is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Six lessons are included in the module:…

The Relationships between the Iowa Test of Basic Skills and the Washington Assessment of Student Learning in the State of Washington. Technical Report.

ERIC Educational Resources Information Center

Joireman, Jeff; Abbott, Martin L.

This report examines the overlap between student test results on the Iowa Test of Basic Skills (ITBS) and the Washington Assessment of Student Learning (WASL). The two tests were compared and contrasted in terms of content and measurement philosophy, and analyses studied the statistical relationship between the ITBS and the WASL. The ITBS assesses…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics Individualized Learning System. CANTRAC A-100-0010. Module Six: Parallel Circuits. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on parallel circuits is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Four lessons are included in the…

Shoulder arthroscopy: the basics.

PubMed

Farmer, Kevin W; Wright, Thomas W

2015-04-01

Shoulder arthroscopy is a commonly performed and accepted procedure for a wide variety of pathologies. Surgeon experience, patient positioning, knowledge of surgical anatomy, proper portal placement, and proper use of instrumentation can improve technical success and minimize complication risks. This article details the surgical anatomy, indications, patient positioning, portal placement, instrumentation, and complications for basic shoulder arthroscopy. Copyright © 2015 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Behavioral Science Design for Audio-Visual Software Development

ERIC Educational Resources Information Center

Foster, Dennis L.

1974-01-01

A discussion of the basic structure of the behavioral audio-visual production which consists of objectives analysis, approach determination, technical production, fulfillment evaluation, program refinement, implementation, and follow-up. (Author)

22 CFR 120.10 - Technical data.

Code of Federal Regulations, 2010 CFR

2010-04-01

... scientific, mathematical or engineering principles commonly taught in schools, colleges and universities or information in the public domain as defined in § 120.11. It also does not include basic marketing information...

40 CFR 58.11 - Network technical requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Network technical requirements. 58.11... (CONTINUED) AMBIENT AIR QUALITY SURVEILLANCE Monitoring Network § 58.11 Network technical requirements. (a)(1... A to this part when operating the SLAMS networks. (2) Beginning January 1, 2009, State and local...

40 CFR 58.11 - Network technical requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 5 2011-07-01 2011-07-01 false Network technical requirements. 58.11... (CONTINUED) AMBIENT AIR QUALITY SURVEILLANCE Monitoring Network § 58.11 Network technical requirements. (a)(1... A to this part when operating the SLAMS networks. (2) Beginning January 1, 2009, State and local...

47 CFR 15.510 - Technical requirements for through D-wall imaging systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Technical requirements for through D-wall imaging systems. 15.510 Section 15.510 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES Ultra-Wideband Operation § 15.510 Technical requirements for through D-wall imaging...

47 CFR 15.515 - Technical requirements for vehicular radar systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 1 2011-10-01 2011-10-01 false Technical requirements for vehicular radar... DEVICES Ultra-Wideband Operation § 15.515 Technical requirements for vehicular radar systems. (a..., changing gears, or engaging a turn signal. (b) The UWB bandwidth of a vehicular radar system operating...

47 CFR 15.515 - Technical requirements for vehicular radar systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Technical requirements for vehicular radar... DEVICES Ultra-Wideband Operation § 15.515 Technical requirements for vehicular radar systems. (a..., changing gears, or engaging a turn signal. (b) The UWB bandwidth of a vehicular radar system operating...

47 CFR 80.231 - Technical Requirements for Class B Automatic Identification System (AIS) equipment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Identification System (AIS) equipment. 80.231 Section 80.231 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... § 80.231 Technical Requirements for Class B Automatic Identification System (AIS) equipment. (a) Class B Automatic Identification System (AIS) equipment must meet the technical requirements of IEC 62287...

47 CFR 80.231 - Technical Requirements for Class B Automatic Identification System (AIS) equipment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Identification System (AIS) equipment. 80.231 Section 80.231 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... § 80.231 Technical Requirements for Class B Automatic Identification System (AIS) equipment. (a) Class B Automatic Identification System (AIS) equipment must meet the technical requirements of IEC 62287...

47 CFR 80.231 - Technical Requirements for Class B Automatic Identification System (AIS) equipment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Identification System (AIS) equipment. 80.231 Section 80.231 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... § 80.231 Technical Requirements for Class B Automatic Identification System (AIS) equipment. (a) Class B Automatic Identification System (AIS) equipment must meet the technical requirements of IEC 62287...

47 CFR 15.515 - Technical requirements for vehicular radar systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 1 2014-10-01 2014-10-01 false Technical requirements for vehicular radar... DEVICES Ultra-Wideband Operation § 15.515 Technical requirements for vehicular radar systems. (a..., changing gears, or engaging a turn signal. (b) The UWB bandwidth of a vehicular radar system operating...

47 CFR 15.515 - Technical requirements for vehicular radar systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 1 2013-10-01 2013-10-01 false Technical requirements for vehicular radar... DEVICES Ultra-Wideband Operation § 15.515 Technical requirements for vehicular radar systems. (a..., changing gears, or engaging a turn signal. (b) The UWB bandwidth of a vehicular radar system operating...

47 CFR 15.515 - Technical requirements for vehicular radar systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 1 2012-10-01 2012-10-01 false Technical requirements for vehicular radar... DEVICES Ultra-Wideband Operation § 15.515 Technical requirements for vehicular radar systems. (a..., changing gears, or engaging a turn signal. (b) The UWB bandwidth of a vehicular radar system operating...

42 CFR 493.1838 - Training and technical assistance for unsuccessful participation in proficiency testing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Training and technical assistance for unsuccessful... REQUIREMENTS Enforcement Procedures § 493.1838 Training and technical assistance for unsuccessful participation... may require the laboratory to undertake training of its personnel, or to obtain necessary technical...

22 CFR 124.8 - Clauses required both in manufacturing license agreements and technical assistance agreements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... agreements and technical assistance agreements. 124.8 Section 124.8 Foreign Relations DEPARTMENT OF STATE... Clauses required both in manufacturing license agreements and technical assistance agreements. The following statements must be included both in manufacturing license agreements and in technical assistance...

9 CFR 351.16 - Certificate required for shipments of technical animal fat.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technical animal fat. 351.16 Section 351.16 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Transportation and Exportation of Certified Technical Animal Fat § 351.16 Certificate required for shipments of...

9 CFR 351.16 - Certificate required for shipments of technical animal fat.

Code of Federal Regulations, 2012 CFR

2012-01-01

... technical animal fat. 351.16 Section 351.16 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Transportation and Exportation of Certified Technical Animal Fat § 351.16 Certificate required for shipments of...

9 CFR 351.16 - Certificate required for shipments of technical animal fat.

Code of Federal Regulations, 2011 CFR

2011-01-01

... technical animal fat. 351.16 Section 351.16 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Transportation and Exportation of Certified Technical Animal Fat § 351.16 Certificate required for shipments of...

9 CFR 351.16 - Certificate required for shipments of technical animal fat.

Code of Federal Regulations, 2014 CFR

2014-01-01

... technical animal fat. 351.16 Section 351.16 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Transportation and Exportation of Certified Technical Animal Fat § 351.16 Certificate required for shipments of...

9 CFR 351.16 - Certificate required for shipments of technical animal fat.

Code of Federal Regulations, 2013 CFR

2013-01-01

... technical animal fat. 351.16 Section 351.16 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFICATION OF TECHNICAL ANIMAL FATS FOR EXPORT Transportation and Exportation of Certified Technical Animal Fat § 351.16 Certificate required for shipments of...

Human Rights and the Global Fund to Fight AIDS, Tuberculosis and Malaria: How Does a Large Funder of Basic Health Services Meet the Challenge of Rights-Based Programs?

PubMed

Jürgens, Ralf; Csete, Joanne; Lim, Hyeyoung; Timberlake, Susan; Smith, Matthew

2017-12-01

The Global Fund to Fight AIDS, Tuberculosis and Malaria was created to greatly expand access to basic services to address the three diseases in its name. From its beginnings, its governance embodied some human rights principles: civil society is represented on its board, and the country coordination mechanisms that oversee funding requests to the Global Fund include representatives of people affected by the diseases. The Global Fund's core strategies recognize that the health services it supports would not be effective or cost-effective without efforts to reduce human rights-related barriers to access and utilization of health services, particularly those faced by socially marginalized and criminalized persons. Basic human rights elements were written into Global Fund grant agreements, and various technical support measures encouraged the inclusion in funding requests of programs to reduce human rights-related barriers. A five-year initiative to provide intensive technical and financial support for the scaling up of programs to reduce these barriers in 20 countries is ongoing.

Simple Myths and Basic Maths about Greening Irrigation

NASA Astrophysics Data System (ADS)

Dionisio Pérez-Blanco, C.; Gómez, C. Mario

2014-05-01

Managing water is a very complex societal issue that needs to involve legal, environmental, technological, financial and political considerations that are difficult to co-ordinate in an effective manner. This complexity and the lack of an agreed assessment framework have often implied that political decisions, largely driven by transaction costs (especially the bargaining costs required to come to an acceptable agreement with all the parties involved), have overshadowed and prevailed over other considerations. As a result, (financially) expensive solutions such as irrigation modernization programmes have been preferred to their inexpensive alternatives to save water, such as quotas or pricing policies. However, greening the economy is mostly about improving water governance and not only about putting the existing resource saving technical alternatives into practice. Focusing on the second and forgetting the first risks finishing with a highly efficient use of water services at the level of each individual user but with an unsustainable amount of water use for the entire economy. This might be happening already in many places with the modernization of irrigated agriculture, the world's largest water user and the one offering the most promising water saving opportunities. In spite of high expectations, costly modern irrigation techniques seem not to be contributing to reduce water scarcity and increase drought resiliency. In fact, according to the little evidence available, in some areas they are resulting in higher water use. Building on basic economic principles this study aims to show the conditions under which this apparently paradoxical outcome, known as the Jevons' Paradox, might appear. This basic model is expected to serve as guidance for assessing the actual outcomes of increasing irrigation efficiency and to discuss the changes in water governance that would be required for this to make a real contribution to sustainable water management.

Health Recommender Systems: Concepts, Requirements, Technical Basics and Challenges

PubMed Central

Wiesner, Martin; Pfeifer, Daniel

2014-01-01

During the last decades huge amounts of data have been collected in clinical databases representing patients' health states (e.g., as laboratory results, treatment plans, medical reports). Hence, digital information available for patient-oriented decision making has increased drastically but is often scattered across different sites. As as solution, personal health record systems (PHRS) are meant to centralize an individual's health data and to allow access for the owner as well as for authorized health professionals. Yet, expert-oriented language, complex interrelations of medical facts and information overload in general pose major obstacles for patients to understand their own record and to draw adequate conclusions. In this context, recommender systems may supply patients with additional laymen-friendly information helping to better comprehend their health status as represented by their record. However, such systems must be adapted to cope with the specific requirements in the health domain in order to deliver highly relevant information for patients. They are referred to as health recommender systems (HRS). In this article we give an introduction to health recommender systems and explain why they are a useful enhancement to PHR solutions. Basic concepts and scenarios are discussed and a first implementation is presented. In addition, we outline an evaluation approach for such a system, which is supported by medical experts. The construction of a test collection for case-related recommendations is described. Finally, challenges and open issues are discussed. PMID:24595212

15 CFR 911.8 - Technical requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... PROCEDURES CONCERNING USE OF THE NOAA SPACE-BASED DATA COLLECTION SYSTEMS § 911.8 Technical requirements. (a) All platform operators of the NOAA DCS must use a data collection platform radio set whose technical...

15 CFR 911.8 - Technical requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... PROCEDURES CONCERNING USE OF THE NOAA SPACE-BASED DATA COLLECTION SYSTEMS § 911.8 Technical requirements. (a) All platform operators of the NOAA DCS must use a data collection platform radio set whose technical...

15 CFR 911.8 - Technical requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... PROCEDURES CONCERNING USE OF THE NOAA SPACE-BASED DATA COLLECTION SYSTEMS § 911.8 Technical requirements. (a) All platform operators of the NOAA DCS must use a data collection platform radio set whose technical...

15 CFR 911.8 - Technical requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... PROCEDURES CONCERNING USE OF THE NOAA SPACE-BASED DATA COLLECTION SYSTEMS § 911.8 Technical requirements. (a) All platform operators of the NOAA DCS must use a data collection platform radio set whose technical...

15 CFR 911.8 - Technical requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... PROCEDURES CONCERNING USE OF THE NOAA SPACE-BASED DATA COLLECTION SYSTEMS § 911.8 Technical requirements. (a) All platform operators of the NOAA DCS must use a data collection platform radio set whose technical...

An Experimental Device for Real Time Determination of Slant Path Atmospheric Contrast Transmittance.

DTIC Science & Technology

1982-03-01

copies ftom th Defense Technical Information Caster. AN others ioM apply to the National Technical Information Service. UNCLASSIFIED SECURITV...EXPERIMENTAL DEVICE FOR REAL TIME DETERMINATION OF SLANT PATH ATMOSPHERIC CONTRAST TRANSMITTANCE Richard W. Johnson 1. INTRODUCTION 2. BASIC CONCEPTS As...and z is an altitude parameter. primary optical channel uses a cosine corrected and PE- ASSIG SYSTM DEPIS1ttt STAGE I DSIN STAGEM Pgormiy TES

TECHNICAL MANPOWER IN NEW YORK STATE. VOLUME II.

ERIC Educational Resources Information Center

AMATULLI, ANGELO; AND OTHERS

THE JOB CONTENT OF THE TECHNICAL OCCUPATIONS AND THE TECHNICAL SKILLS AND SUBJECT MATTER KNOWLEDGES REQUIRED ARE BASED PRIMARILY ON INFORMATION SUPPLIED BY EMPLOYERS FROM 17,414 ESTABLISHMENTS IN NEW YORK STATE. DATA ARE ALSO GIVEN ON GRADE STRUCTURE, EDUCATION AND EXPERIENCE REQUIREMENTS, TESTS AND LICENSES REQUIRED FOR THE JOB, SOURCES OF…

Technical Communication Internship Requirements in the Academic Economy: How We Compare among Ourselves and across Other Applied Fields

ERIC Educational Resources Information Center

Savage, Gerald J.; Seible, Marcea K.

2010-01-01

This article reports a study of internship requirements in technical communication programs compared with three established professions and one emerging profession that have certification or licensing requirements for practitioners. The study addresses three questions about technical communication internship programs: 1) Are internships offered as…

47 CFR 25.215 - Technical requirements for space stations in the Direct Broadcast Satellite Service.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 2 2012-10-01 2012-10-01 false Technical requirements for space stations in... Technical requirements for space stations in the Direct Broadcast Satellite Service. In addition to § 25.148(f), space station antennas operating in the Direct Broadcast Satellite Service must be designed to...

47 CFR 25.215 - Technical requirements for space stations in the Direct Broadcast Satellite Service.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 2 2013-10-01 2013-10-01 false Technical requirements for space stations in... Technical requirements for space stations in the Direct Broadcast Satellite Service. In addition to § 25.148(f), space station antennas operating in the Direct Broadcast Satellite Service must be designed to...

47 CFR 25.215 - Technical requirements for space stations in the Direct Broadcast Satellite Service.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 2 2011-10-01 2011-10-01 false Technical requirements for space stations in... Technical requirements for space stations in the Direct Broadcast Satellite Service. In addition to § 25.148(f), space station antennas operating in the Direct Broadcast Satellite Service must be designed to...

47 CFR 25.215 - Technical requirements for space stations in the Direct Broadcast Satellite Service.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Technical requirements for space stations in... Technical requirements for space stations in the Direct Broadcast Satellite Service. In addition to § 25.148(f), space station antennas operating in the Direct Broadcast Satellite Service must be designed to...

38 CFR 61.52 - Threshold requirements for technical assistance grant applications.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2011-07-01 2011-07-01 false Threshold requirements for technical assistance grant applications. 61.52 Section 61.52 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.52 Threshold requirements for technical assistanc...

38 CFR 61.52 - Technical assistance grant application packages-threshold requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2014-07-01 2014-07-01 false Technical assistance grant application packages-threshold requirements. 61.52 Section 61.52 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM Technical Assistance Grants § 61.52 Technical...

38 CFR 61.52 - Technical assistance grant application packages-threshold requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2013-07-01 2013-07-01 false Technical assistance grant application packages-threshold requirements. 61.52 Section 61.52 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM Technical Assistance Grants § 61.52 Technical...

44 CFR 65.3 - Requirement to submit new technical data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... available, a community shall notify the Administrator of the changes by submitting technical or scientific... IDENTIFICATION AND MAPPING OF SPECIAL HAZARD AREAS § 65.3 Requirement to submit new technical data. A community's...

Reach Up for Math.

ERIC Educational Resources Information Center

Seguin, Barbara Rehmann

1984-01-01

The Suggestive Accelerative Learning and Teaching method uses music, group discussion, physical exercise, and relaxation techniques to reduce math anxiety in adult basic education students who want to enter vocational programs at Blackhawk Technical Institute (Wisconsin). (SK)

Managing Challenges in a Multi Contractor Project

NASA Technical Reports Server (NTRS)

King, Ron

2011-01-01

The presentation provides a project description, describes the integrated product team, and review project challenges. The challenges include programmatic, technical, basic drop tests, heavy drop tests, C-17 envelope expansion, and Ares I-X.

Technical features and criteria in designing fiber-reinforced composite materials: from the aerospace and aeronautical field to biomedical applications.

PubMed

Gloria, Antonio; Ronca, Dante; Russo, Teresa; D'Amora, Ugo; Chierchia, Marianna; De Santis, Roberto; Nicolais, Luigi; Ambrosio, Luigi

2011-01-01

Polymer-based composite materials are ideal for applications where high stiffness-to-weight and strength-to-weight ratios are required. From aerospace and aeronautical field to biomedical applications, fiber-reinforced polymers have replaced metals, thus emerging as an interesting alternative. As widely reported, the mechanical behavior of the composite materials involves investigation on micro- and macro-scale, taking into consideration micromechanics, macromechanics and lamination theory. Clinical situations often require repairing connective tissues and the use of composite materials may be suitable for these applications because of the possibility to design tissue substitutes or implants with the required mechanical properties. Accordingly, this review aims at stressing the importance of fiber-reinforced composite materials to make advanced and biomimetic prostheses with tailored mechanical properties, starting from the basic principle design, technologies, and a brief overview of composites applications in several fields. Fiber-reinforced composite materials for artificial tendons, ligaments, and intervertebral discs, as well as for hip stems and mandible models will be reviewed, highlighting the possibility to mimic the mechanical properties of the soft and hard tissues that they replace.

Performance of multimirror quartzline lamps in a high-pressure, underwater environment

NASA Technical Reports Server (NTRS)

Slater, Howard A.

1988-01-01

Multimirror Quartzline Lamps are extremely versatile and effective for nonconventional imaging requirements such as high-speed photo and video instrumentation and high-magnification imaging. The lamps' versatility though, is not limited to conventional environments. Many research experiments and projects require a high pressure environment. Continuous photographic data acquisition in a high-pressure vessel requires wall penetrations and creates design problems as well as potential failure sites. Underwater photography adds the extra consideration of a liquid. This report expands upon the basic research presented in, Performance of Multimirror Quartzline Lamps in High-Pressure Environments, (NASA-TM-83793, Ernie Walker and Howard Slater, 1984). The report provides information to professional industrial, scientific, and technical photographers as well as research personnel on the survivability of lighting a multimirror quartzline lamp in a nonconventional high-pressure underwater environment. Test results of lighted ELH 300 W multimirror quartzline lamps under high-pressure conditions are documented and general information on the lamps' intensity (footcandle output), cone of light coverage, approximate color temperature is provided. Continuous lighting considerations in liquids are also discussed.

Rotor systems research aircraft predesign study. Volume 2: Conceptual study report

NASA Technical Reports Server (NTRS)

Schmidt, S. A.; Linden, A. W.

1972-01-01

The overall feasibility of the technical requirements and concepts for a rotor system research aircraft (RSRA) was determined. The designs of two aircraft were then compared against the RSRA requirements. One of these is an all new aircraft specifically designed as an RSRA vehicle. A new main rotor, transmission, wings, and fuselage are included in this design. The second aircraft uses an existing Sikorsky S-61 main rotor, an S-61 roller gearbox, and a highly modified Sikorsky S-67 airframe. The wing for this aircraft is a new design. Both aircraft employ a fan-in-fin anti-torque/yaw control system, T58-GE-16 engines for rotor power, and TF34-GE-2 turbofans for auxiliary thrust. Each aircraft meets the basic requirements and goals of the program. The all new aircraft has inflight variable main rotor shaft tilt, a side-by-side cockpit seating arrangement, and is slightly faster in the compound mode. It is also somewhat lighter since it uses new dynamic components specifically designed for the RSRA. Preliminary development plans, including schedules and costs, were prepared for both of these aircraft.

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 32: Intermediate Oscillators; Module 33: Special Devices; Module 34: Linear Integrated Circuits. Students Guide.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This student guidebook is designed for use with the study booklets in modules 32 through 34 included in the military-developed course on basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. An…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 30: Intermediate Power Supplies; Module 31: RF, IF, and Video Amplifiers. Students Guide.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This student guidebook is designed for use with the study booklets in modules 30-31 included in the military-developed course on basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. An…

A State Articulated Instructional Objectives Guide for Occupational Education Programs. State Pilot Model for Drafting (Graphic Communications). Part I--Basic. Part II--Specialty Programs. Section A (Mechanical Drafting and Design). Section B (Architectural Drafting and Design).

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

A two-part articulation instructional objective guide for drafting (graphic communications) is provided. Part I contains summary information on seven blocks (courses) of instruction. They are as follow: introduction; basic technical drafting; problem solving in graphics; reproduction processes; freehand drawing and sketching; graphics composition;…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics Individualized Learning System. CANTRAC A-100-0010. Module Five: Relationships of Current, Voltage, and Resistance. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on the relationships of current, voltage, and resistance is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptaticn to vocational instructional and curriculum development in a civilian setting.…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 20: Solid State Power Supplies; 20T: Electron Tube Power Supplies. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This set of individualized learning modules on power supplies is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Two modules are included in the…

13 CFR 306.2 - Award requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 306.2 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION, DEPARTMENT OF COMMERCE TRAINING, RESEARCH AND TECHNICAL ASSISTANCE INVESTMENTS Local and National Technical Assistance § 306.2 Award requirements. EDA selects Projects for Local and National Technical Assistance Investments in...

13 CFR 306.2 - Award requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 306.2 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION, DEPARTMENT OF COMMERCE TRAINING, RESEARCH AND TECHNICAL ASSISTANCE INVESTMENTS Local and National Technical Assistance § 306.2 Award requirements. EDA selects Projects for Local and National Technical Assistance Investments in...

13 CFR 306.2 - Award requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 306.2 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION, DEPARTMENT OF COMMERCE TRAINING, RESEARCH AND TECHNICAL ASSISTANCE INVESTMENTS Local and National Technical Assistance § 306.2 Award requirements. EDA selects Projects for Local and National Technical Assistance Investments in...

13 CFR 306.2 - Award requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 306.2 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION, DEPARTMENT OF COMMERCE TRAINING, RESEARCH AND TECHNICAL ASSISTANCE INVESTMENTS Local and National Technical Assistance § 306.2 Award requirements. EDA selects Projects for Local and National Technical Assistance Investments in...

42 CFR 417.472 - Basic contract requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Basic contract requirements. 417.472 Section 417.472 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... PREPAYMENT PLANS Medicare Contract Requirements § 417.472 Basic contract requirements. (a) Submittal of...

A Procedural Skills OSCE: Assessing Technical and Non-Technical Skills of Internal Medicine Residents

ERIC Educational Resources Information Center

Pugh, Debra; Hamstra, Stanley J.; Wood, Timothy J.; Humphrey-Murto, Susan; Touchie, Claire; Yudkowsky, Rachel; Bordage, Georges

2015-01-01

Internists are required to perform a number of procedures that require mastery of technical and non-technical skills, however, formal assessment of these skills is often lacking. The purpose of this study was to develop, implement, and gather validity evidence for a procedural skills objective structured clinical examination (PS-OSCE) for internal…

42 CFR 1007.5 - Basic requirement.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Basic requirement. 1007.5 Section 1007.5 Public... STATE MEDICAID FRAUD CONTROL UNITS § 1007.5 Basic requirement. A State Medicaid fraud control unit must... requirements of §§ 1007.7 through 1007.13 of this part. ...

Continued benefits of a technical assistance web site to local tobacco control coalitions during a state budget shortfall.

PubMed

Buller, David B; Young, Walter F; Bettinghaus, Erwin P; Borland, Ron; Walther, Joseph B; Helme, Donald; Andersen, Peter A; Cutter, Gary R; Maloy, Julie A

2011-01-01

A state budget shortfall defunded 10 local tobacco coalitions during a randomized trial but defunded coalitions continued to have access to 2 technical assistance Web sites. To test the ability of Web-based technology to provide technical assistance to local tobacco control coalitions. Randomized 2-group trial with local tobacco control coalitions as the unit of randomization. Local communities (ie, counties) within the State of Colorado. Leaders and members in 34 local tobacco control coalitions funded by the state health department in Colorado. Two technical assistance Web sites: A Basic Web site with text-based information and a multimedia Enhanced Web site containing learning modules, resources, and communication features. Use of the Web sites in minutes, pages, and session and evaluations of coalition functioning on coalition development, conflict resolution, leadership satisfaction, decision-making satisfaction, shared mission, personal involvement, and organization involvement in survey of leaders and members. Coalitions that were defunded but had access to the multimedia Enhanced Web site during the Fully Funded period and after defunding continued to use it (treatment group × funding status × period, F(3,714) = 3.18, P = .0234). Coalitions with access to the Basic Web site had low Web site use throughout and use by defunded coalitions was nearly zero when funding ceased. Members in defunded Basic Web site coalitions reported that their coalitions functioned worse than defunded Enhanced Web site coalitions (coalition development: group × status, F(1,360) = 4.81, P = .029; conflict resolution: group × status, F(1,306) = 5.69, P = .018; leadership satisfaction: group × status, F(1,342) = 5.69, P = .023). The Enhanced Web site may have had a protective effect on defunded coalitions. Defunded coalitions may have increased their capacity by using the Enhanced Web site when fully funded or by continuing to use the available online resources after defunding. Web-based technical assistance with online training and resources may be a good investment when future funding is not ensured.

An Investigation of Integrated Sizing for US Army Men and Women

DTIC Science & Technology

1981-08-01

number) Anthropometry U.S. Army Field Clothing Mee, surem, ent (s) Military Personnel Sizing (Clothing) Body Size Men Clothing Design Sizes...are larger. ’Ibid. ŕ°White, Robert M. and Edmund Churchill, 1.971, The Body Size of Soldiers, U.S. Army Anthropometry - 1966, Technical Report 72-51...1977, Anthropometry of Women in the U.S. Army--1977; Report No. 2 - The Basic Univariate Statistics, Technical Report NATICK/TR-77/024, U.S. Army

Motivating Students To Read Physics Content.

ERIC Educational Resources Information Center

Sprague, Marsha M.; Cotturone, Jennifer

2003-01-01

Describes effective projects that made students effectively read scientific materials in the physics content area. Suggests using trade books in science to enhance student learning of basic physics concepts and comprehension of technical reading matter. (KHR)

A risk assessment methodology to evaluate the risk failure of managed aquifer recharge in the Mediterranean Basin

NASA Astrophysics Data System (ADS)

Rodríguez-Escales, Paula; Canelles, Arnau; Sanchez-Vila, Xavier; Folch, Albert; Kurtzman, Daniel; Rossetto, Rudy; Fernández-Escalante, Enrique; Lobo-Ferreira, João-Paulo; Sapiano, Manuel; San-Sebastián, Jon; Schüth, Christoph

2018-06-01

Managed aquifer recharge (MAR) can be affected by many risks. Those risks are related to different technical and non-technical aspects of recharge, like water availability, water quality, legislation, social issues, etc. Many other works have acknowledged risks of this nature theoretically; however, their quantification and definition has not been developed. In this study, the risk definition and quantification has been performed by means of fault trees and probabilistic risk assessment (PRA). We defined a fault tree with 65 basic events applicable to the operation phase. After that, we have applied this methodology to six different managed aquifer recharge sites located in the Mediterranean Basin (Portugal, Spain, Italy, Malta, and Israel). The probabilities of the basic events were defined by expert criteria, based on the knowledge of the different managers of the facilities. From that, we conclude that in all sites, the perception of the expert criteria of the non-technical aspects were as much or even more important than the technical aspects. Regarding the risk results, we observe that the total risk in three of the six sites was equal to or above 0.90. That would mean that the MAR facilities have a risk of failure equal to or higher than 90 % in the period of 2-6 years. The other three sites presented lower risks (75, 29, and 18 % for Malta, Menashe, and Serchio, respectively).