Video image analysis as a potential grading system for Uruguayan beef carcasses.
Vote, D J; Bowling, M B; Cunha, B C N; Belk, K E; Tatum, J D; Montossi, F; Smith, G C
2009-07-01
A study was conducted in 2 phases to evaluate the effectiveness of 1) the VIAscan Beef Carcass System (BCSys; hot carcass system) and the CVS BeefCam (chilled carcass system), used independently or in combination, to predict Uruguayan beef carcass fabrication yields; and 2) the CVS BeefCam to segregate Uruguayan beef carcasses into groups that differ in the Warner-Bratzler shear force (WBSF) values of their LM steaks. The results from the meat yield phase of the present study indicated that the prediction of saleable meat yield percentages from Uruguayan beef carcasses by use of the BCSys or CVS BeefCam is similar to, or slightly better than, the use of USDA yield grade calculated to the nearest 0.1 and was much more effective than prediction based on Uruguay National Institute of Meat (INAC) grades. A further improvement in fabrication yield prediction could be obtained by use of a dual-component video image analysis (VIA) system. Whichever method of VIA prediction of fabrication yield is used, a single predicted value of fabrication yield for every carcass removes an impediment to the implementation of a value-based pricing system. Additionally, a VIA method of predicting carcass yield has the advantage over the current INAC classification system in that estimates would be produced by an instrument rather than by packing plant personnel, which would appeal to cattle producers. Results from the tenderness phase of the study indicated that the CVS BeefCam output variable for marbling was not (P > 0.05) able to segregate steer and heifer carcasses into groups that differed in WBSF values. In addition, the results of segregating steer and heifer carcasses according to muscle color output variables indicate that muscle maturity and skeletal maturity were useful for segregating carcasses according to differences in WBSF values of their steaks (P > 0.05). Use of VIA to predict beef carcass fabrication yields could improve accuracy and reduce subjectivity in comparison with use of current INAC grades. Use of VIA to sort carcasses according to muscle color would allow for the marketing of more consistent beef products with respect to tenderness. This would help facilitate the initiation of a value-based marketing system for the Uruguayan beef industry.
Consumer thresholds for establishing the value of beef tenderness.
Miller, M F; Carr, M A; Ramsey, C B; Crockett, K L; Hoover, L C
2001-12-01
In the present study, a national consumer evaluation was conducted for beef tenderness on USDA Select strip loin steaks of known Warner-Bratzler shear (WBS) force values, ranging from tough (> 5.7 kg) to tender (< 3.0 kg), and to assess the monetary value that consumers place on tenderness by determining the average price a consumer would pay for a steak in three tenderness categories. Three supermarkets in each of five metropolitan areas (Baltimore, MD/Washington D.C.; Chicago, IL; Dallas/Fort Worth, TX; Los Angeles, CA; and Lubbock, TX) were selected to represent a wide range of income, education, and ethnicity at each city. Five trained research teams traveled to the cities to collect data during the same 10-d period. Consumers (n = 734; minimum of 15 consumers/panel, three panels/store, three stores/city, five cities) were asked to evaluate samples from each tenderness classification (tender, intermediate, or tough) for overall and tenderness acceptability, overall quality, beef flavor, juiciness, tenderness, how much they would pay for the steak ($17.14, 14.28, or 10.98/kg), if they would pay more than current market price if guaranteed tender, and to estimate the number of meals in a 2-wk period that included beef. The consumers were 52% light beef users, consuming 0 to 8 meals containing beef in 2 wk, 41% heavy beef users (greater than 12 meals/2 wk), and 6% moderate beef users (9 to 12 meals/2 wk). Consumer tenderness acceptability increased as WBS values decreased (P < 0.05). The transition in consumer perception from tender to tough beef occurred between 4.3 and 4.9 kg of WBS based on > or = 86% consumer acceptability. Consumer acceptability for tenderness decreased from 86% at 4.3 kg for a "slightly tender" rating to 59% at 4.9 kg for a "slightly tough" rating. Data from the present study suggested that consumer WBS tenderness values of < 3.0, 3.4, 4.0, 4.3, and > 4.9 kg would result in 100, 99, 94, 86, and 25% customer satisfaction for beef tenderness, respectively. Seventy-eight percent of the consumers would purchase steaks if the retailer guaranteed them to be tender. The retail steak value differences found in this study would result in the opportunity for a premium to be paid for a guaranteed tender (< 3.0 kg WBS value) carcass of $76.26 vs the toughest (> 5.7 kg) classification. A premium of $66.96 could be paid to the tender classification carcasses vs the tough (> 4.9 kg) classification carcasses, and a premium of $36.58 could be paid for the tender classification carcasses vs the intermediate (> 3.0 to < 4.6 kg) classification carcasses. Results from the present study show that consumers can segregate differences in beef tenderness and that consumers are willing to pay more for more-tender beef.
Acheson, R J; Woerner, D R; Martin, J N; Belk, K E; Engle, T E; Brown, T R; Brooks, J C; Luna, A M; Thompson, L D; Grimes, H L; Arnold, A N; Savell, J W; Gehring, K B; Douglass, L W; Howe, J C; Patterson, K Y; Roseland, J M; Williams, J R; Cifelli, A; Leheska, J M; McNeill, S H
2015-12-01
Beef nutrition research has become increasingly important domestically and internationally for the beef industry and its consumers. The objective of this study was to analyze the nutrient composition of ten beef loin and round cuts to update the nutrient data in the USDA National Nutrient Database for Standard Reference. Seventy-two carcasses representing a national composite of Yield Grade, Quality Grade, sex classification, and genetic type were identified from six regions across the U.S. Beef short loins, strip loins, tenderloins, inside rounds, and eye of rounds (NAMP # 173, 175, 190A, 169A, and 171C) were collected from the selected carcasses and shipped to three university meat laboratories for storage, retail fabrication, and raw/cooked analysis of nutrients. Sample homogenates from each animal were analyzed for proximate composition. These data provide updated information regarding the nutrient status of beef, in addition, to determining the influence of Quality Grade, Yield Grade, and sex classification on nutrient composition. Copyright © 2015. Published by Elsevier Ltd.
Shackelford, S D; Wheeler, T L; Koohmaraie, M
2012-03-01
The present experiment was conducted to provide a validation of a previously developed model for online classification of US Select carcasses for LM tenderness based on visible and near-infrared (VISNIR) spectroscopy and to determine if the accuracy of VISNIR-based tenderness classification could be enhanced by making measurements after postmortem aging. Spectroscopy was conducted online, during carcass grading, at a large-scale commercial fed beef-processing facility, and the strip loin was obtained from the left side of US Select carcasses (n = 467). Slice shear force (SSF) was measured on fresh steaks at 2 and 14 d postmortem. Online VISNIR tenderness classes differed in mean SSF values at both 2 d (29.4 vs. 33.6 kg) and 14 d (18.0 vs. 21.2 kg) postmortem (P < 10(-7)). Online VISNIR tenderness classes differed in both the percentage of carcasses with LM SSF values greater than 40 kg at 2 d postmortem (5.1 vs. 21.0%; P < 10(-6)) and the percentage of carcasses with LM SSF values greater than 25 kg at 14 d postmortem (6.8 vs. 23.2%; P < 10(-5)). Whereas 15.0% of the carcasses sampled for this experiment had LM SSF values greater than 25 kg at 14 d postmortem, only 6.8% of the carcasses classified as tender by VISNIR had LM SSF values greater than 25 kg. All the carcasses sampled that had LM SSF values greater than 35 kg at 14 d postmortem were accurately classified as tough by VISNIR. Before measurement of SSF on d 14, VISNIR spectroscopy was conducted on the SSF steak. Tenderness classes based on d 14 VISNIR spectra differed both in mean SSF value at 14 d postmortem (17.7 vs. 21.6 kg; P < 10(-11)) and the percentage of carcasses with LM SSF values greater than 25 kg at 14 d postmortem (7.3 vs. 22.7%; P < 10(-5)). These data support our previous work showing that VISNIR spectroscopy can be used to classify US Select carcasses noninvasively for LM tenderness, and the results establish that this technology could also be applied to aged US Select strip loins. This technology would allow packing companies and other segments of the beef marketing chain to identify US Select carcasses or strip loins that excel in LM tenderness for use in branded beef programs.
Shackelford, S D; Wheeler, T L; King, D A; Koohmaraie, M
2012-03-01
The present experiments were conducted to field test a system optimized for online prediction of beef LM tenderness based on visible and near-infrared (VISNIR) spectroscopy and to develop and validate a model for prediction of tenderness that would be unbiased by normal variation in bloom time before application of VISNIR. For both Exp. 1 and 2, slice shear force (SSF) was measured on fresh (never frozen) steaks at 14 d postmortem. Carcasses with VISNIR-predicted SSF ≤15 kg were classified as VISNIR predicted tender and carcasses with VISNIR-predicted SSF >15 kg were classified as VISNIR not predicted tender. In Exp. 1, spectroscopy was conducted online, during carcass grading, at 3 large-scale commercial fed-beef processing facilities. Each carcass (n = 1,155) was evaluated immediately after ribbing and again when the carcass was graded. For model development and validation, carcasses were blocked by plant and observed SSF. One-half of the carcasses (n = 579) were assigned to a calibration data set, which was used to develop regression equations, and one-half of the carcasses (n = 576) were assigned to a prediction data set, which was used to validate the regression equations. Carcasses predicted tender by VISNIR spectroscopy had smaller (P < 10(-19)) mean LM SSF values at 14 d postmortem in the calibration (13.9 vs. 16.5 kg) and prediction (13.8 vs. 16.4 kg) data sets than did carcasses not predicted tender by VISNIR spectroscopy. Relative to carcasses not predicted tender by VISNIR, a decreased percentage of carcasses predicted tender by VISNIR had LM SSF >25 kg in the calibration (2.0 vs. 7.8%) and prediction (0.8 vs. 8.0%) data sets. In Exp. 2, carcasses (n = 4,204) were evaluated with VISNIR online at 6 commercial fed-beef processing facilities on 38 production days. The carcasses predicted tender by VISNIR spectroscopy had decreased mean LM SSF values at 14 d postmortem (16.3 vs. 19.9 kg; P < 10(-87)), longer sarcomere lengths (1.77 vs. 1.72 µm; P < 10(-10)), and a greater percentage of desmin degraded (42 vs. 34%; P < 10(-5)) by 14 d postmortem. Relative to carcasses not predicted tender by VISNIR, a decreased percentage of carcasses predicted tender by VISNIR had LM SSF >25 kg (4.9 vs. 21.3%). The present experiments resulted in development and independent validation of a robust method to noninvasively predict LM tenderness of grain-fed beef carcasses. This technology could facilitate tenderness-based beef merchandising systems.
Shackelford, S D; Wheeler, T L; Koohmaraie, M
1999-06-01
The objectives of this study were to evaluate the efficacy of a system for classifying beef for tenderness based on a rapid, simple method of measuring cooked longissimus shear force. Longissimus steaks (2.54 cm thick) were trimmed free of s.c. fat and bone and rapidly cooked using a belt grill. A 1-cm-thick, 5-cm-long slice was removed from the cooked longissimus parallel with the muscle fibers for measurement of shear force. Slices were sheared with a flat, blunt-end blade using an electronic testing machine. The entire process was completed in less than 10 min. Therefore, in commercial application, this process could be completed during the 10- to 15-min period that carcasses are normally held to allow the ribeye to bloom for quality grading. In Exp. 1, the repeatability of slice shear force (SSF), as determined by evaluation of duplicate samples from 204 A-maturity carcasses, was .89. In Exp. 2, A-maturity carcasses (n = 483) were classified into three groups based on SSF (< 23, 23 to 40, and > 40 kg) at 3 d postmortem that differed (P < .001) in mean trained sensory panel tenderness ratings (7.3 +/- .04, 6.4 +/- .06, and 4.4 +/- .20) and the percentages (100, 91, and 28%) of samples rated "Slightly Tender" or higher at 14 d postmortem. Therefore, this tenderness classification system could be used to accurately segregate beef carcasses into expected tenderness groups. Further research is needed to test the feasibility and accuracy of this system under a variety of commercial processing conditions.
Martin, J N; Brooks, J C; Thompson, L D; Savell, J W; Harris, K B; May, L L; Haneklaus, A N; Schutz, J L; Belk, K E; Engle, T; Woerner, D R; Legako, J F; Luna, A M; Douglass, L W; Douglass, S E; Howe, J; Duvall, M; Patterson, K Y; Leheska, J L
2013-11-01
Beef nutrition is important to the worldwide beef industry. The objective of this study was to analyze proximate composition of eight beef rib and plate cuts to update the USDA National Nutrient Database for Standard Reference (SR). Furthermore, this study aimed to determine the influence of USDA Quality Grade on the separable components and proximate composition of the examined retail cuts. Carcasses (n=72) representing a composite of Yield Grade, Quality Grade, gender and genetic type were identified from six regions across the U.S. Beef plates and ribs (IMPS #109 and 121C and D) were collected from the selected carcasses and shipped to three university meat laboratories for storage, retail fabrication, cooking, and dissection and analysis of proximate composition. These data provide updated information regarding the nutrient content of beef and emphasize the influence of common classification systems (Yield Grade and Quality Grade) on the separable components, cooking yield, and proximate composition of retail beef cuts. Copyright © 2013 Elsevier Ltd. All rights reserved.
Wyle, A M; Vote, D J; Roeber, D L; Cannell, R C; Belk, K E; Scanga, J A; Goldberg, M; Tatum, J D; Smith, G C
2003-02-01
This study was conducted to determine the effectiveness of the SmartMV prototype BeefCam Video Imaging System (prototype BeefCam) for classifying beef carcasses into palatability ("certified" or "not certified" as palatable) groups. Carcasses (n = 769) were selected from four beef-packing plants to represent three USDA quality grade groups (Top Choice, TC; Low Choice, LC; and Select, SE). Following chilling, a prototype BeefCam image of the longissimus muscle was obtained for each carcass. Strip loins were collected from the left side of each carcass and aged for 10 d; Warner-Bratzler shear force (WBSF; n = 769) values and consumer panel ratings (hedonic, end-anchored, 9-point ratings for overall like/dislike; n = 500 carcasses) were obtained for cooked steaks. Using information from the images, two regression models were developed to predict the first principal component of WBSF and consumer panel ratings for sorting carcasses based on expected eating quality. Model I used only prototype BeefCam output, whereas Model II used prototype BeefCam output and a coded value for quality grade group. For both models, carcasses with a predicted value of less than 0.0 were certified as producing palatable beef Additional carcasses (n = 292) were evaluated at a fifth and separate packing plant by prototype BeefCam to validate Models I and II. A strip loin was collected from each carcass and WBSF was measured after 14 d of aging. The percentages of validation carcasses that generated tough (WBSF > or = 4.5 kg) steaks were 6.5,5.8,10.7, and 7.9% for, TC, LC, SE, and all carcasses, respectively. Use of Model I certified 51.9, 47.6, 43.8, and 47.3% of TC, LC, SE, and all carcasses, respectively. Of the carcasses certified by use of Model I, 0.0,0.0, 4.1, and 1.4% of TC, LC, SE, and all carcasses, respectively, generated tough steaks. Use of Model II certified 59.7, 47.6, 25.0, and 42.1% of TC, LC, SE, and all carcasses, respectively. Of the carcasses certified by use of Model II, 2.2, 0.0, 3.6, and 1.6% of TC, LC, SE, and all carcasses, respectively, generated tough steaks. For both models, the frequency of carcasses that produced tough steaks in the certified group was lower (P < 0.05) for all validation carcasses sampled compared with that of the original carcass population. Based on the decrease in the frequency of carcasses that produced tough steaks, further development of a commercial BeefCam system is warranted.
Oliver, A; Mendizabal, J A; Ripoll, G; Albertí, P; Purroy, A
2010-04-01
The SEUROP system is currently in use for carcass classification in Europe. Image analysis and other new technologies are being developed to enhance and supplement this classification system. After slaughtering, 91 carcasses of local Spanish beef breeds were weighed and classified according to the SEUROP system. Two digital photographs (a side and a dorsal view) were taken of the left carcass sides, and a total of 33 morphometric measurements (lengths, perimeters, areas) were made. Commercial butchering of these carcasses took place 24 h postmortem, and the different cuts were grouped according to four commercial meat cut quality categories: extra, first, second, and third. Multiple regression analysis of carcass weight and the SEUROP conformation score (x variables) on meat yield and the four commercial cut quality category yields (y variables) was performed as a measure of the accuracy of the SEUROP system. Stepwise regression analysis of carcass weight and the 33 morphometric image analysis measurements (x variables) and meat yield and yields of the four commercial cut quality categories (y variables) was carried out. Higher accuracy was achieved using image analysis than using only the current SEUROP conformation score. The regression coefficient values were between R(2)=0.66 and R(2)=0.93 (P<0.001) for the SEUROP system and between R(2)=0.81 and R(2)=0.94 (P<0.001) for the image analysis method. These results suggest that the image analysis method should be helpful as a means of supplementing and enhancing the SEUROP system for grading beef carcasses. 2009 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Ćirić, J.; Lukić, M.; Radulović, S.; Janjić, J.; Glamočlija, N.; Marković, R.; Baltić, M. Ž.
2017-09-01
The objective was to study the relationships between the carcass characteristics and meat composition of young Simmental beef, classified with regard to conformation and degree of fatness scores, and total lipid content, depending on gender. For this purpose, 90 animals (60 male and 30 female Simmental beef cattle) were analysed. The results of the study showed that gender affected carcass measurement scores and chemical composition of meat through its important effect on overall animal fatness. Referring to correlations, male carcass conformation score was negatively related to slaughter weight, total lipid content and fatness score. On the other hand, slaughter weight, hot and cold carcass weight, dressing percentage and carcass conformation was positively related to fatness score, all of them being significant. However, female carcass conformation score was positively related to slaughter weight, total lipid content and fatness score. Hot and cold carcass weights of female Simmental beef cattle were positively correlated to slaughter weight, total lipid content and carcass conformation score. Carcass conformation score and fatness score were affected by gender of young Simmental beef cattle.
Emerson, M R; Woerner, D R; Belk, K E; Tatum, J D
2013-02-01
This study quantified relationships between USDA instrument marbling measurements and LM sensory attributes (tenderness, flavor, juiciness), and shear force. Heifer (n = 390) and steer (n = 328) carcasses (all A-maturity) were selected at 4 beef processing plants in Colorado, Kansas, Nebraska, and Texas to represent 7 marbling degrees: traces (TR), slight (SL), small (SM), modest (MT), moderate (MD), slightly abundant (SA), and moderately abundant (MA). Classification into marbling groups was based on marbling scores determined using USDA-approved VBG 2000 grading systems. Strip loin steaks were obtained from both sides of each carcass and aged for 14 d. One steak was used to obtain Warner-Bratzler shear force (WBSF) and slice shear force (SSF) measurements. The other steak was evaluated by a trained sensory panel for juiciness, tenderness, intensity of flavors characterized as meaty/brothy, buttery/beef fat, bloody/serumy, livery/organy, and grassy; and overall sensory experience (negative or positive). Instrument marbling score explained 45%, 40%, 32%, 71%, and 61% of the observed variation in panel ratings for juiciness, tenderness, meaty/brothy flavor intensity, buttery/beef fat flavor intensity, and overall sensory experience, respectively. Increased degree of marbling resulted in steaks having greater (P < 0.001) juiciness (MA > SA > MD > MT > SM > SL = TR), meaty/brothy flavor (MA = SA > MD = MT > SM > SL > TR), and buttery/beef fat flavor (MA > SA > MD > MT > SM > SL > TR). Steak tenderness also increased (P < 0.001) as marbling degree increased; however, tenderness differences among marbling degrees differed for steers (MA = SA > MD = MT > SM > SL = TR) and heifers (MA = SA > MD > MT > SM > SL > TR). Steaks produced by steers had lower (P < 0.05) WBSF and SSF values, and were rated as more tender by sensory panelists than steaks produced by heifers, but the effect of sex on panel tenderness was significant only among steaks with TR marbling. Results of this study showed that instrument-based classification of beef carcasses, according to differences in marbling, effectively identified subsequent differences in strip loin steak sensory performance. Nearly all (98 to 99%) steaks with MA or SA marbling, and most (between 80% and 90%) steaks with MD and MT marbling, received positive ratings for overall sensory experience. In comparison, 62% of SM steaks, 29% of SL steaks, and 15% of TR steaks received positive sensory experience ratings.
The efficacy of three objective systems for identifying beef cuts that can be guaranteed tender.
Wheeler, T L; Vote, D; Leheska, J M; Shackelford, S D; Belk, K E; Wulf, D M; Gwartney, B L; Koohmaraie, M
2002-12-01
The objective of this study was to determine the accuracy of three objective systems (prototype BeefCam, colorimeter, and slice shear force) for identifying guaranteed tender beef. In Phase I, 308 carcasses (105 Top Choice, 101 Low Choice, and 102 Select) from two commercial plants were tested. In Phase II, 400 carcasses (200 rolled USDA Select and 200 rolled USDA Choice) from one commercial plant were tested. The three systems were evaluated based on progressive certification of the longissimus as "tender" in 10% increments (the best 10, 20, 30%, etc., certified as "tender" by each technology; 100% certification would mean no sorting for tenderness). In Phase I, the error (percentage of carcasses certified as tender that had Warner-Bratzler shear force of > or = 5 kg at 14 d postmortem) for 100% certification using all carcasses was 14.1%. All certification levels up to 80% (slice shear force) and up to 70% (colorimeter) had less error (P < 0.05) than 100% certification. Errors in all levels of certification by prototype BeefCam (13.8 to 9.7%) were not different (P > 0.05) from 100% certification. In Phase I, the error for 100% certification for USDA Select carcasses was 30.7%. For Select carcasses, all slice shear force certification levels up to 60% (0 to 14.8%) had less error (P < 0.05) than 100% certification. For Select carcasses, errors in all levels of certification by colorimeter (20.0 to 29.6%) and by BeefCam (27.5 to 31.4%) were not different (P > 0.05) from 100% certification. In Phase II, the error for 100% certification for all carcasses was 9.3%. For all levels of slice shear force certification less than 90% (for all carcasses) or less than 80% (Select carcasses), errors in tenderness certification were less than (P < 0.05) for 100% certification. In Phase II, for all carcasses or Select carcasses, colorimeter and prototype BeefCam certifications did not significantly reduce errors (P > 0.05) compared to 100% certification. Thus, the direct measure of tenderness provided by slice shear force results in more accurate identification of "tender" beef carcasses than either of the indirect technologies, prototype BeefCam, or colorimeter, particularly for USDA Select carcasses. As tested in this study, slice shear force, but not the prototype BeefCam or colorimeter systems, accurately identified "tender" beef.
Bohaychuk, Valerie M.; Gensler, Gary E.; Barrios, Pablo Romero
2011-01-01
In 2006 and 2007 beef and pork carcass swabs from provincially inspected abattoirs in Alberta, Canada were tested to determine the levels of total aerobic bacteria, coliform bacteria, and generic Escherichia coli, and the prevalence of Salmonella spp., Campylobacter spp., and Shiga toxin-producing E. coli (STEC). Swabs from beef and pork carcasses from 48 and 34 facilities, respectively, were analyzed. All samples tested were positive for aerobic bacteria with 99.8% of beef and 96.0% of pork samples, having total counts of ≤ 100 000 CFU/cm2. Coliform bacteria were isolated from 22.4% and 42.0% of beef and pork carcass samples, respectively. Generic E. coli were recovered from 14.6% of beef and 33.7% of pork carcass samples. For beef carcasses, positive tests were obtained for 0.1% of 1036 samples tested for Salmonella spp., 1.5% of 1022 samples tested for Campylobacter spp. and 5.4% of 1018 samples tested for STEC. For pork carcasses, positive tests were obtained for 1.6 % of 1076 samples tested for Salmonella spp., 8.8% of 1070 samples tested for Campylobacter spp. and 4.8% of 1067 samples tested for STEC. PMID:22467964
Genetic parameters for carcass weight, conformation and fat in five beef cattle breeds.
Kause, A; Mikkola, L; Strandén, I; Sirkko, K
2015-01-01
Profitability of beef production can be increased by genetically improving carcass traits. To construct breeding value evaluations for carcass traits, breed-specific genetic parameters were estimated for carcass weight, carcass conformation and carcass fat in five beef cattle breeds in Finland (Hereford, Aberdeen Angus, Simmental, Charolais and Limousin). Conformation and fat were visually scored using the EUROP carcass classification. Each breed was separately analyzed using a multitrait animal model. A total of 6879-19 539 animals per breed had phenotypes. For the five breeds, heritabilities were moderate for carcass weight (h 2=0.39 to 0.48, s.e.=0.02 to 0.04) and slightly lower for conformation (h 2=0.30 to 0.44, s.e.=0.02 to 0.04) and carcass fat (h 2=0.29 to 0.44, s.e.=0.02 to 0.04). The genetic correlation between carcass weight and conformation was favorable in all breeds (r G=0.37 to 0.53, s.e.=0.04 to 0.05), heavy carcasses being genetically more conformed. The phenotypic correlation between carcass weight and carcass fat was moderately positive in all breeds (r P=0.21 to 0.32), implying that increasing carcass weight was related to increasing fat levels. The respective genetic correlation was the strongest in Hereford (r G=0.28, s.e.=0.05) and Angus (r G=0.15, s.e.=0.05), the two small body-sized British breeds with the lowest conformation and the highest fat level. The correlation was weaker in the other breeds (r G=0.08 to 0.14). For Hereford, Angus and Simmental, more conformed carcasses were phenotypically fatter (r P=0.11 to 0.15), but the respective genetic correlations were close to zero (r G=-0.05 to 0.04). In contrast, in the two large body-sized and muscular French breeds, the genetic correlation between conformation and fat was negative and the phenotypic correlation was close to zero or negative (Charolais: r G=-0.18, s.e.=0.06, r P=0.02; Limousin: r G=-0.56, s.e.=0.04, r P=-0.13). The results indicate genetic variation for the genetic improvement of the carcass traits, favorable correlations for the simultaneous improvement of carcass weight and conformation in all breeds, and breed differences in the correlations of carcass fat.
Shackelford, S D; Wheeler, T L; Koohmaraie, M
2003-01-01
The present experiment was conducted to evaluate the ability of the U.S. Meat Animal Research Center's beef carcass image analysis system to predict calculated yield grade, longissimus muscle area, preliminary yield grade, adjusted preliminary yield grade, and marbling score under commercial beef processing conditions. In two commercial beef-processing facilities, image analysis was conducted on 800 carcasses on the beef-grading chain immediately after the conventional USDA beef quality and yield grades were applied. Carcasses were blocked by plant and observed calculated yield grade. The carcasses were then separated, with 400 carcasses assigned to a calibration data set that was used to develop regression equations, and the remaining 400 carcasses assigned to a prediction data set used to validate the regression equations. Prediction equations, which included image analysis variables and hot carcass weight, accounted for 90, 88, 90, 88, and 76% of the variation in calculated yield grade, longissimus muscle area, preliminary yield grade, adjusted preliminary yield grade, and marbling score, respectively, in the prediction data set. In comparison, the official USDA yield grade as applied by online graders accounted for 73% of the variation in calculated yield grade. The technology described herein could be used by the beef industry to more accurately determine beef yield grades; however, this system does not provide an accurate enough prediction of marbling score to be used without USDA grader interaction for USDA quality grading.
Prediction of beef carcass salable yield and trimmable fat using bioelectrical impedance analysis.
Zollinger, B L; Farrow, R L; Lawrence, T E; Latman, N S
2010-03-01
Bioelectrical impedance technology (BIA) is capable of providing an objective method of beef carcass yield estimation with the rapidity of yield grading. Electrical resistance (Rs), reactance (Xc), impedance (I), hot carcass weight (HCW), fat thickness between the 12th and 13th ribs (FT), estimated percentage kidney, pelvic, and heart fat (KPH%), longissimus muscle area (LMA), length between electrodes (LGE) as well as three derived carcass values that included electrical volume (EVOL), reactive density (XcD), and resistive density (RsD) were determined for the carcasses of 41 commercially fed cattle. Carcasses were subsequently fabricated into salable beef products reflective of industry standards. Equations were developed to predict percentage salable carcass yield (SY%) and percentage trimmable fat (FT%). Resulting equations accounted for 81% and 84% of variation in SY% and FT%, respectively. These results indicate that BIA technology is an accurate predictor of beef carcass composition. Copyright 2009 Elsevier Ltd. All rights reserved.
Meat standards and grading: a world view.
Polkinghorne, R J; Thompson, J M
2010-09-01
This paper addresses the principles relating to meat standards and grading of beef and advances the concept that potential exists to achieve significant desirable change from adopting more consumer focused systems within accurate value-based payment frameworks. The paper uses the definitions that classification is a set of descriptive terms describing features of the carcass that are useful to those involved in the trading of carcasses, whereas grading is the placing of different values on carcasses for pricing purposes, depending on the market and requirements of traders. A third definition is consumer grading, which refers to grading systems that seek to define or predict consumer satisfaction with a cooked meal. The development of carcass classification and grading schemes evolved from a necessity to describe the carcass using standard terms to facilitate trading. The growth in world trade of meat and meat products and the transition from trading carcasses to marketing individual meal portions raises the need for an international language that can service contemporary needs. This has in part been addressed by the United Nations promoting standard languages on carcasses, cuts, trim levels and cutting lines. Currently no standards exist for describing consumer satisfaction. Recent Meat Standards Australia (MSA) research in Australia, Korea, Ireland, USA, Japan and South Africa showed that consumers across diverse cultures and nationalities have a remarkably similar view of beef eating quality, which could be used to underpin an international language on palatability. Consumer research on the willingness to pay for eating quality shows that consumers will pay higher prices for better eating quality grades and generally this was not affected by demographic or meat preference traits of the consumer. In Australia the MSA eating quality grading system has generated substantial premiums to retailers, wholesalers and to the producer. Future grading schemes which measure both carcass yield and eating quality have the potential to underpin the development and implementation of transparent value-based payment systems which will encourage improved production efficiency throughout the supply chain.
The effects of degree of dark cutting on tenderness and sensory attributes of beef
USDA-ARS?s Scientific Manuscript database
The objective of this study was to determine the effect of degree of dark cutting (DC) on the tenderness, juiciness, and flavor attributes of beef. During carcass grading at a large U.S. commercial beef harvesting facility, DC carcasses (n = 160) and matching normal control (NC) carcasses (n = 160)...
Stelzleni, A M; Patten, L E; Johnson, D D; Calkins, C R; Gwartney, B L
2007-10-01
The objective of this study was to benchmark carcasses and muscles from commercially identified fed (animals that were perceived to have been fed an increased plane of nutrition before slaughter) and nonfed cull beef and dairy cows and A-maturity, USDA Select steers, so that the muscles could be identified from cull cow carcasses that may be used to fill a void of intermediately priced beef steaks. Carcass characteristics were measured at 24 h postmortem for 75 carcasses from 5 populations consisting of cull beef cows commercially identified as fed (B-F, n = 15); cull beef cows commercially identified as nonfed (B-NF, n = 15); cull dairy cows commercially identified as fed (D-F, n = 15); cull dairy cows commercially identified as nonfed (D-NF, n = 15); and A-maturity, USDA Select grade steers (SEL, n = 15). Nine muscles were excised from each carcass [m. infraspinatus, m. triceps brachii (lateral and long heads), m. teres major, m. longissimus dorsi (also termed LM), m. psoas major, m. gluteus medius, m. rectus femoris, and m. tensor fasciae latae] and subjected to Warner-Bratzler shear force testing and objective sensory panel evaluation after 14 d of postmortem aging. Carcass characteristics differed (P < 0.05) among the 5 commercially identified slaughter groups for the traits of lean maturity, bone maturity, muscle score, HCW, fat color, subjective lean color, marbling, ribeye area, 12th-rib fat thickness, and preliminary yield grade. Carcasses from commercially identified, fed cull cows exhibited more (P < 0.01) weight in carcass lean than did commercially identified, nonfed cull cows. There was a group x muscle interaction (P = 0.02) for Warner-Bratzler shear force. Warner-Bratzler shear force and sensory overall tenderness values demonstrates that muscles from the SEL group were the most tender (P < 0.01), whereas muscles from the B-NF group were the least tender (P < 0.01). Sensory, beef flavor intensity was similar (P > 0.20) among cull cow carcass groups and more intense (P < 0.01) than the SEL carcass group. Muscles from the SEL group exhibited less (P < 0.01) detectable off-flavor than the cull cow carcass groups, whereas the B-NF group exhibited the most (P < 0.01) detectable off-flavor. Although carcass and muscle quality from commercially identified, fed, cull beef and dairy cows was not similar to A-maturity, USDA Select beef, they did show improvements when compared with nonfed, cull, beef and dairy cow carcasses and muscles.
USDA-ARS?s Scientific Manuscript database
The National Beef Quality Audit-2011(NBQA-2011) was conducted to assess targeted characteristics on the harvest floor that affect the quality and value of cattle, carcasses, and byproducts. Survey teams evaluated approximately 18,000 cattle/carcasses between May and November 2011 in 8 beef processin...
Dormedy, E S; Brashears, M M; Cutter, C N; Burson, D E
2000-12-01
A 2% lactic acid wash used in a large meat-processing facility was validated as an effective critical control point (CCP) in a hazard analysis and critical control point (HACCP) plan. We examined the microbial profiles of beef carcasses before the acid wash, beef carcasses immediately after the acid wash, beef carcasses 24 h after the acid wash, beef subprimal cuts from the acid-washed carcasses, and on ground beef made from acid-washed carcasses. Total mesophilic, psychrotrophic, coliforms, generic Escherichia coli, lactic acid bacteria, pseudomonads, and acid-tolerant microorganisms were enumerated on all samples. The presence of Salmonella spp. was also determined. Acid washing significantly reduced all counts except for pseudomonads that were present at very low numbers before acid washing. All other counts continued to stay significantly lower (P < 0.05) than those on pre-acid-washed carcasses throughout all processing steps. Total bacteria, coliforms, and generic E. coli enumerated on ground beef samples were more than 1 log cycle lower than those reported in the U.S. Department of Agriculture Baseline data. This study suggests that acid washes may be effective CCPs in HACCP plans and can significantly reduce the total number of microorganisms present on the carcass and during further processing.
USDA-ARS?s Scientific Manuscript database
The instrument grading assessments for the 2011 National Beef Quality Audit evaluated seasonal trends of beef carcass quality and yield attributes over the course of the year. One week of instrument grading data, HCW, gender, USDA quality grade (QG), and yield grade (YG) factors, were collected ever...
Code of Federal Regulations, 2013 CFR
2013-07-01
... handcarrying any carcass or half carcass of beef, pork, horse, deer, or buffalo, or any quarter carcass of beef... preservation and flavoring of meat, including poultry, by curing materials. It does not include a workroom or...
Code of Federal Regulations, 2012 CFR
2012-07-01
... handcarrying any carcass or half carcass of beef, pork, horse, deer, or buffalo, or any quarter carcass of beef... preservation and flavoring of meat, including poultry, by curing materials. It does not include a workroom or...
Code of Federal Regulations, 2014 CFR
2014-07-01
... handcarrying any carcass or half carcass of beef, pork, horse, deer, or buffalo, or any quarter carcass of beef... preservation and flavoring of meat, including poultry, by curing materials. It does not include a workroom or...
Hudson, W. R.; Roberts, T. A.; Whelehan, O. P.
1987-01-01
The bacteriological status of beef carcasses was monitored at a commercial abattoir before and after two stages of modernization to the beef slaughterline which included changing from cradle dressing to dressing on an overhead rail, and the introduction of hot water spray cleaning of carcasses. Although small significant (P less than 0.05) differences in bacterial count occurred among carcass sites within modernization stages, significant visit within stage variation and stage X site interactions prevented any significant change in overall count being observed among stages and carcass sites. Principal components analysis revealed small changes in the distribution of bacterial numbers on the sites sampled. PMID:3556439
USDA-ARS?s Scientific Manuscript database
The National Beef Quality Audit – 2011 (NBQA-2011) assessed the current status of quality and consistency of fed steers and heifers. Beef carcasses (n = 9,802), representing approximately 10 percent of each production lot in 28 beef processing facilities, were selected randomly for the survey. Car...
Relationship of the bovine growth hormone gene to carcass traits in Japanese black cattle.
Tatsuda, K; Oka, A; Iwamoto, E; Kuroda, Y; Takeshita, H; Kataoka, H; Kouno, S
2008-02-01
The bovine growth hormone gene (bGH) possesses three haplotypes, A, B and C, that differ by amino acid mutations at positions 127 and 172 in the fifth exon: (leucine 127, threonine 172), (valine 127, threonine 172) and (valine 127, methionine 172) respectively. The correlation between meat quality or carcass weight and these haplotypes was investigated in Japanese black cattle. Altogether, 940 bGH haplotypes were compared with respect to six carcass traits: carcass weight, longissimus muscle area, rib thickness, subcutaneous fat thickness, beef marbling score and beef colour. The frequency of the B haplotype was higher (0.421) than that of A (0.269) and C (0.311). High carcass weight and low beef marbling were associated with haplotype A (p < 0.05 and p < 0.01 respectively), whereas beef marbling was increased by haplotype C (p < 0.05). Estimated regression coefficient of the A haplotype substitution effect for carcass weight and beef marbling score were 5.55 (13.1% of the phenotypic SD) and -0.31 (17.0%) respectively. That of the C haplotype for beef marbling score was 0.20 (11.0%). The other traits showed no relationship to the haplotypes examined. The results of this investigation suggest that information pertaining to bGH polymorphisms in Japanese black cattle could be used to improve the selection of meat traits.
Lawrence, T E; Farrow, R L; Zollinger, B L; Spivey, K S
2008-06-01
With the adoption of visual instrument grading, the calculated yield grade can be used for payment to cattle producers selling on grid pricing systems. The USDA beef carcass grading standards include a relationship between required LM area (LMA) and HCW that is an important component of the final yield grade. As noted on a USDA yield grade LMA grid, a 272-kg (600-lb) carcass requires a 71-cm(2) (11.0-in.(2)) LMA and a 454-kg (1,000-lb) carcass requires a 102-cm(2) (15.8-in.(2)) LMA. This is a linear relationship, where required LMA = 0.171(HCW) + 24.526. If a beef carcass has a larger LMA than required, the calculated yield grade is lowered, whereas a smaller LMA than required increases the calculated yield grade. The objective of this investigation was to evaluate the LMA to HCW relationship against data on 434,381 beef carcasses in the West Texas A&M University (WTAMU) Beef Carcass Research Center database. In contrast to the USDA relationship, our data indicate a quadratic relationship [WTAMU LMA = 33.585 + 0.17729(HCW) -0.0000863(HCW(2))] between LMA and HCW whereby, on average, a 272-kg carcass has a 75-cm(2) (11.6-in.(2)) LMA and a 454-kg carcass has a 96-cm(2) (14.9-in.(2)) LMA, indicating a different slope and different intercept than those in the USDA grading standards. These data indicate that the USDA calculated yield grade equation favors carcasses lighter than 363 kg (800 lb) for having above average muscling and penalizes carcasses heavier than 363 kg (800 lb) for having below average muscling. If carcass weights continue to increase, we are likely to observe greater proportions of yield grade 4 and 5 carcasses because of the measurement bias that currently exists in the USDA yield grade equation.
Clarke, A M; Drennan, M J; McGee, M; Kenny, D A; Evans, R D; Berry, D P
2009-07-01
In genetic improvement programmes for beef cattle, the effect of selecting for a given trait or index on other economically important traits, or their predictors, must be quantified to ensure no deleterious consequential effects go unnoticed. The objective was to compare live animal measurements, carcass composition and plasma hormone and metabolite concentrations of male progeny of sires selected on an economic index in Ireland. This beef carcass index (BCI) is expressed in euros and based on weaning weight, feed intake, carcass weight and carcass conformation and fat scores. The index is used to aid in the genetic comparison of animals for the expected profitability of their progeny at slaughter. A total of 107 progeny from beef sires of high (n = 11) or low (n = 11) genetic merit for the BCI were compared in either a bull (slaughtered at 16 months of age) or steer (slaughtered at 24 months of age) production system, following purchase after weaning (8 months of age) from commercial beef herds. Data were analysed as a 2 × 2 factorial design (two levels of genetic merit by two production systems). Progeny of high BCI sires had heavier carcasses, greater (P < 0.01) muscularity scores after weaning, greater (P < 0.05) skeletal scores and scanned muscle depth pre-slaughter, higher (P < 0.05) plasma insulin concentrations and greater (P < 0.01) animal value (obtained by multiplying carcass weight by carcass value, which was based on the weight of meat in each cut by its commercial value) than progeny of low BCI sires. Regression of progeny performance on sire genetic merit was also undertaken across the entire data set. In steers, the effect of BCI on carcass meat proportion, calculated carcass value (c/kg) and animal value was positive (P < 0.01), while a negative association was observed for scanned fat depth pre-slaughter and carcass fat proportion (P < 0.01), but there was no effect in bulls. The effect of sire expected progeny difference (EPD) for carcass weight followed the same trends as BCI. Muscularity scores, carcass meat proportion and calculated carcass value increased, whereas scanned fat depth, carcass fat and bone proportions decreased with increasing sire EPD for conformation score. The opposite association was observed for sire EPD for fat score. Results from this study show that selection using the BCI had positive effects on live animal muscularity, carcass meat proportion, proportions of high-value cuts and carcass value in steer progeny, which are desirable traits in beef production.
Arcobacter contamination on pre- and post-chilled bovine carcasses and in minced beef at retail.
De Smet, S; De Zutter, L; Van Hende, J; Houf, K
2010-01-01
The present study aimed to assess the Arcobacter contamination on bovine carcasses postevisceration and postcooling in two slaughterhouses and in ready-to-eat minced beef. Carcasses (n = 247) were sampled at four sites in two slaughterhouses and 100 minced beef samples were collected at retail. Isolation was performed by a quantitative and qualitative Arcobacter selective method, and the isolates were identified by multiplex PCR, after which a part of them were characterized by enterobacterial repetitive intergenic consensus (ERIC)-PCR. Although arcobacters were isolated from 37% of the bovine carcasses postevisceration with the chest and the foreleg as most contaminated sites, cooling the carcasses for at least 24 h reduced the incidence of Arcobacter (7%) on the carcass surface significantly. Arcobacter butzleri was the species most frequently isolated, although co-contamination with multiple species also occurred. At retail, arcobacters were present in 9% of the minced beef samples, with Arcobacter butzleri as the dominant species. Forced air cooling of bovine carcasses for at least 24 h decreased the number of positive carcasses, but did not eliminate all arcobacters. This study demonstrates that maintaining good hygiene practices throughout the food supply chain is crucial to ensure safe food products at the consumer level.
USDA-ARS?s Scientific Manuscript database
The effect of sponge sample collection site on the recovery of multiple indicator organisms from beef carcass surfaces was evaluated. Two 4,000 cm2 samples were collected from pre-evisceration carcasses (n=248), one from the inside and outside round area (top site) and one from the navel-plate-bris...
USDA-ARS?s Scientific Manuscript database
The effectiveness of pre-evisceration, skin-on carcass sanitation on reducing bacterial contamination of beef carcasses was tested using 3 cattle per treatment and 3 cattle as controls at each of 3 abattoirs in southern Wisconsin. The sanitation procedure included stunning, bleeding, tying off the e...
Arthur, Terrance M; Kalchayanand, Norasak; Agga, Getahun E; Wheeler, Tommy L; Koohmaraie, Mohammad
2017-01-01
Escherichia coli O157:H7 is a major food safety concern for the beef industry. Several studies have provided evidence that cattle hides are the main source of beef carcass contamination during processing and that reductions in the E. coli O157:H7 load on the hides of cattle entering processing facilities will lead to reductions in carcass contamination. Bacteriophages have been proposed as a novel preharvest antimicrobial intervention to reduce the levels of E. coli O157:H7 on cattle hides. The objective of this study was to evaluate a commercialized phage application administered in the lairage area of commercial beef processing plants for the ability to reduce E. coli O157:H7 contamination of cattle hides and carcasses. Cattle lots either received phage spray treatment (n = 289) or did not (n = 301), as they entered the lairage environments in two separate experiments at two different commercial beef processing plants. Hide and carcass samples were collected and analyzed for E. coli O157:H7 prevalence and concentration. Cattle hides receiving phage treatment had an E. coli O157:H7 prevalence of 51.8%, whereas untreated hides had a prevalence of 57.6%. For carcass samples, the E. coli O157 prevalence in treated and untreated samples was 17.1% and 17.6%, respectively. The results obtained from these experiments demonstrated that the treatment of cattle hides with bacteriophages before processing did not produce a significant reduction of E. coli O157:H7 on cattle hides or beef carcasses during processing.
Bermingham, Emma N; Reis, Mariza Gomes; Subbaraj, Arvind K; Cameron-Smith, David; Fraser, Karl; Jonker, Arjan; Craigie, Cameron R
2018-06-01
Wagyu beef products are marketed as luxury goods to discerning consumers and the lipid content and composition are important drivers of wagyu product value. Wagyu beef is an extensively marbled meat product, well characterised for its tenderness and flavour. In New Zealand, pasture-fed Wagyu-dairy beef production is increasing to meet demand for ultra-premium meat products. Important for these characteristics is the composition of lipid species and their distribution across the carcass. The aim of this study was to analyse the distribution of fatty acids and phospholipids in 26 table cuts, nine co-products and three fat deposits of carcasses from New Zealand pasture-fed Wagyu-dairy cross beef carcasses (n = 5). Phospholipid and fatty acid levels varied across different cuts of the carcass, but typically cuts with high levels of phospholipids also had high levels of omega-3 fatty acids and low levels of saturated fatty acids. This work will be used in the future to examine the potential health aspects of pasture-fed Wagyu beef. Copyright © 2018 Elsevier Ltd. All rights reserved.
Marchello, M J; McLennan, J E; Dhuyvetter, D V; Slanger, W D
1999-11-01
Two experiments were performed to develop prediction equations of saleable beef and to validate the prediction equations. In Exp. 1, 50 beef cattle were finished to typical slaughter weights, and multiple linear regression equations were developed to predict kilograms of trimmed boneless, retail product of live cattle, and hot and cold carcasses. A four-terminal bioelectrical impedance analyzer (BIA) was used to measure resistance (Rs) and reactance (Xc) on each animal and processed carcass. The IMPS cuts plus trim were weighed and recorded. Distance between detector terminals (Lg) and carcass temperature (Tp) at time of BIA readings were recorded. Other variables included live weight (BW), hot carcass weight (HCW), cold carcass weight (CCW), and volume (Lg2/Rs). Regression equations for predicting kilograms of saleable product were [11.87 + (.409 x BW) - (.335 x Lg) + (.0518 x volume)] for live (R2 = .80); [-58.83 + (.589 x HCW) - (.846 x Rs) + (1.152 x Xc) + (.142 x Lg) + (2.608 x Tp)] for hot carcass (R2 = .95); and [32.15 + (.633 x CCW) + (.33 x Xc) - (.83 x Lg) + (.677 x volume)] for cold carcass (R2 = .93). In Exp. 2, 27 beef cattle were finished in a manner similar to Exp. 1, and the prediction equations from Exp. 1 were used to predict the saleable product of these animals. The Pearson correlations between actual saleable product and the predictions based on live and cold carcass data were .91 and .95, respectively. The Spearman and Kendall rank correlations were .95 and .83, respectively, for the cold carcass data. These results provide a practical application of bioelectrical impedance for market-based pricing. They complement previous studies that assessed fat-free mass.
USDA-ARS?s Scientific Manuscript database
Escherichia coli O157:H7 is a major food safety concern for the beef industry. Several studies have provided evidence that cattle hides are the main source of beef carcass contamination during processing and that reductions in the E. coli O157:H7 load on the hides of cattle entering processing faci...
Lawrence, T E; Elam, N A; Miller, M F; Brooks, J C; Hilton, G G; VanOverbeke, D L; McKeith, F K; Killefer, J; Montgomery, T H; Allen, D M; Griffin, D B; Delmore, R J; Nichols, W T; Streeter, M N; Yates, D A; Hutcheson, J P
2010-06-01
Analyses were conducted to evaluate the ability of the USDA yield grade equation to detect differences in subprimal yield of beef-type steers and calf-fed Holstein steers that had been fed zilpaterol hydrochloride (ZH; Intervet Inc., Millsboro, DE) as well as those that had not been fed ZH. Beef-type steer (n = 801) and calf-fed Holstein steer (n = 235) carcasses were fabricated into subprimal cuts and trim. Simple correlations between calculated yield grades and total red meat yields ranged from -0.56 to -0.62 for beef-type steers. Reliable correlations from calf-fed Holstein steers were unobtainable; the probability of a type I error met or exceeded 0.39. Linear models were developed for the beef-type steers to predict total red meat yield based on calculated USDA yield grade within each ZH duration. At an average calculated USDA yield grade of 2.9, beef-type steer carcasses that had not been fed ZH had an estimated 69.4% red meat yield, whereas those fed ZH had an estimated 70.7% red meat yield. These results indicate that feeding ZH increased red meat yield by 1.3% at a constant calculated yield grade. However, these data also suggest that the calculated USDA yield grade score is a poor and variable estimator (adjusted R(2) of 0.31 to 0.38) of total red meat yield of beef-type steer carcasses, regardless of ZH feeding. Moreover, no relationship existed (adjusted R(2) of 0.00 to 0.01) for calf-fed Holstein steer carcasses, suggesting the USDA yield grade is not a valid estimate of calf-fed Holstein red meat yield.
Mitochondrial abundance and efficiency contribute to lean color of dark cutting beef
USDA-ARS?s Scientific Manuscript database
Beef carcasses exhibiting four levels of dark cutting severity (DCS): Severe, Moderate, Mild, and Shady were compared to Control carcasses to investigate biochemical traits contributing to the dark cutting condition. Color attributes of Longissimus lumborum (LL) were measured after grading and duri...
Signorini, Marcelo; Costa, Magdalena; Teitelbaum, David; Restovich, Viviana; Brasesco, Hebe; García, Diego; Superno, Valeria; Petroli, Sandra; Bruzzone, Mariana; Arduini, Victor; Vanzini, Mónica; Sucari, Adriana; Suberbie, Germán; Maricel, Turina; Rodríguez, Ricardo; Leotta, Gerardo A
2018-08-01
In Argentina, Shiga toxin producing Escherichia coli (STEC) serogroups O157, O26, O103, O111, O145 and O121 are adulterant in ground beef. In other countries, the zero-tolerance approach to all STEC is implemented for chilled beef. Argentinean abattoirs are interested in implementing effective interventions against STEC on carcasses. Pre-rigor beef carcasses were used to determine whether nine antimicrobial strategies effectively reduced aerobic plate, coliform and E. coli counts and stx and eae gene prevalence. These strategies were: citric acid (2%; automated), acetic acid (2%; manual and automated), lactic acid (LA 2%; manual and automated), LA (3%; automated), electrolytically-generated hypochlorous acid (400 ppm; manual), hot water (82 °C; automated) and INSPEXX (0.2%; automated). Automated application of 2% LA after 30-60-min aeration and 3% LA at 55 °C were the most effective interventions. Automated application was more effective than manual application. Decontamination of beef carcasses through automated application of lactic acid and hot water would reduce public health risks associated with STEC contamination. Copyright © 2018 Elsevier Ltd. All rights reserved.
Wilhelm, Barbara; Rajić, Andrijana; Greig, Judy D; Waddell, Lisa; Harris, Janet
2011-09-01
Hazard analysis critical control point (HACCP) programs have been endorsed and implemented globally to enhance food safety. Our objective was to identify, assess, and summarize or synthesize the published research investigating the effect of HACCP programs on microbial prevalence and concentration on food animal carcasses in abattoirs through primary processing. The results of microbial testing pre- and post-HACCP implementation were reported in only 19 studies, mostly investigating beef (n=13 studies) and pork (n=8 studies) carcasses. In 12 of 13 studies measuring aerobic bacterial counts, reductions were reported on beef (7/8 studies), pork (3/3), poultry (1/1), and sheep (1/1). Significant (p<0.05) reductions in prevalence of Salmonella spp. were reported in studies on pork (2/3 studies) and poultry carcasses (3/3); no significant reductions were reported on beef carcasses (0/8 studies). These trends were confirmed through meta-analysis of these data; however, powerful meta-analysis was precluded because of an overall scarcity of individual studies and significant heterogeneity across studies. Australia reported extensive national data spanning the period from 4 years prior to HACCP implementation to 4 years post-HACCP, indicating reduction in microbial prevalence and concentration on beef carcasses in abattoirs slaughtering beef for export; however, the effect of abattoir changes initiated independent of HACCP could not be excluded. More primary research and access to relevant proprietary data are needed to properly evaluate HACCP program effectiveness using modeling techniques capable of differentiating the effects of HACCP from other concurrent factors.
Super Shedding of Escherichia coli O157:H7 by Cattle and the Impact on Beef Carcass Contamination
USDA-ARS?s Scientific Manuscript database
Beef carcass contamination is a direct result of pathogen transfer from cattle hides harboring organisms such as enterohemorrhagic E. coli. Hide contamination occurs from direct and indirect fecal contamination in cattle production and lairage environments. In each of these environments, individua...
Genome-wide association study for carcass traits in a composite beef cattle breed
USDA-ARS?s Scientific Manuscript database
Improvement of carcass traits is highly emphasized in beef cattle production in order to meet consumer demands. Discovering and understanding genes and genetic variants that control these traits is of paramount importance. In this study, different genome wide association approaches (ssGWAS, Bayes A...
Brookes, Victoria J.; Jordan, David; Davis, Stephen; Ward, Michael P.; Heller, Jane
2015-01-01
Introduction Strains of Shiga-toxin producing Escherichia coli O157 (STEC O157) are important foodborne pathogens in humans, and outbreaks of illness have been associated with consumption of undercooked beef. Here, we determine the most effective intervention strategies to reduce the prevalence of STEC O157 contaminated beef carcasses using a modelling approach. Method A computational model simulated events and processes in the beef harvest chain. Information from empirical studies was used to parameterise the model. Variance-based global sensitivity analysis (GSA) using the Saltelli method identified variables with the greatest influence on the prevalence of STEC O157 contaminated carcasses. Following a baseline scenario (no interventions), a series of simulations systematically introduced and tested interventions based on influential variables identified by repeated Saltelli GSA, to determine the most effective intervention strategy. Results Transfer of STEC O157 from hide or gastro-intestinal tract to carcass (improved abattoir hygiene) had the greatest influence on the prevalence of contaminated carcases. Due to interactions between inputs (identified by Saltelli GSA), combinations of interventions based on improved abattoir hygiene achieved a greater reduction in maximum prevalence than would be expected from an additive effect of single interventions. The most effective combination was improved abattoir hygiene with vaccination, which achieved a greater than ten-fold decrease in maximum prevalence compared to the baseline scenario. Conclusion Study results suggest that effective interventions to reduce the prevalence of STEC O157 contaminated carcasses should initially be based on improved abattoir hygiene. However, the effect of improved abattoir hygiene on the distribution of STEC O157 concentration on carcasses is an important information gap—further empirical research is required to determine whether reduced prevalence of contaminated carcasses is likely to result in reduced incidence of STEC O157 associated illness in humans. This is the first use of variance-based GSA to assess the drivers of STEC O157 contamination of beef carcasses. PMID:26713610
Bonny, S P F; Hocquette, J-F; Pethick, D W; Farmer, L J; Legrand, I; Wierzbicki, J; Allen, P; Polkinghorne, R J; Gardner, G E
2016-06-01
Delivering beef of consistent quality to the consumer is vital for consumer satisfaction and will help to ensure demand and therefore profitability within the beef industry. In Australia, this is being tackled with Meat Standards Australia (MSA), which uses carcass traits and processing factors to deliver an individual eating quality guarantee to the consumer for 135 different 'cut by cooking methods' from each carcass. The carcass traits used in the MSA model, such as ossification score, carcass weight and marbling explain the majority of the differences between breeds and sexes. Therefore, it was expected that the model would predict with eating quality of bulls and dairy breeds with good accuracy. In total, 8128 muscle samples from 482 carcasses from France, Poland, Ireland and Northern Ireland were MSA graded at slaughter then evaluated for tenderness, juiciness, flavour liking and overall liking by untrained consumers, according to MSA protocols. The scores were weighted (0.3, 0.1, 0.3, 0.3) and combined to form a global eating quality (meat quality (MQ4)) score. The carcasses were grouped into one of the three breed categories: beef breeds, dairy breeds and crosses. The difference between the actual and the MSA-predicted MQ4 scores were analysed using a linear mixed effects model including fixed effects for carcass hang method, cook type, muscle type, sex, country, breed category and postmortem ageing period, and random terms for animal identification, consumer country and kill group. Bulls had lower MQ4 scores than steers and females and were predicted less accurately by the MSA model. Beef breeds had lower eating quality scores than dairy breeds and crosses for five out of the 16 muscles tested. Beef breeds were also over predicted in comparison with the cross and dairy breeds for six out of the 16 muscles tested. Therefore, even after accounting for differences in carcass traits, bulls still differ in eating quality when compared with females and steers. Breed also influenced eating quality beyond differences in carcass traits. However, in this case, it was only for certain muscles. This should be taken into account when estimating the eating quality of meat. In addition, the coefficients used by the Australian MSA model for some muscles, marbling score and ultimate pH do not exactly reflect the influence of these factors on eating quality in this data set, and if this system was to be applied to Europe then the coefficients for these muscles and covariates would need further investigation.
Control Points To Reduce Movement of Central Nervous System Tissue during Beef Slaughter.
Aalhus, J L; Thacker, R D; Larsen, I L; Roberts, J C; Price, M A; Juárez, M
2017-02-01
Consumption of central nervous system tissue (CNST) from cattle with bovine spongiform encephalopathy (BSE) is thought to cause the human neurological disease, variant Creutzfeldt-Jacob disease. To identify points of cross-contamination of beef carcasses with CNST, 55 young beef cattle were slaughtered and processed through a federally inspected multispecies abattoir. The objectives of this study were to evaluate CNST spread following the placement of a plug in the penetration site of the skull after captive bolt stunning, to evaluate cross-contamination of carcasses before and after splitting, to compare the effects of hot water pasteurization (84°C for 10 s) versus cold water wash (10°C for 30 s) for reducing CNST on the carcass, and to examine other possible sources of cross-contamination in the abattoir. Results indicated that the use of a plastic plug reduced CNST contamination near the bolt penetration site. This study also confirmed that carcass splitting resulted in an increase in CNST contamination at various areas of the carcass. Hot water pasteurization appeared to be an effective means of removing CNST contamination from carcasses in most of the areas sampled.
Renter, David G.; Bohaychuk, Valerie; Van Donkersgoed, Joyce; King, Robin
2007-01-01
The study objectives were to determine the prevalence and serotypes of non-O157 Shiga toxin-producing Escherichia coli (STEC) in pens of feedlot cattle and on corresponding beef carcasses. We collected 25 fecal samples from 84 pens in 21 Alberta feedlots and 40 carcass swabs from each preslaughter pen for analysis by culture and polymerase chain reaction (PCR). Non-O157 STEC were recovered from feces from 12 (14%) of the 84 pens and 12 (57%) of the 21 feedlots by examination of 1 E. coli isolate positive for 4-methylumbelliferyl-β-d-glucuronide per sample. Twelve non-O157 serotypes were detected, but 7 of the 15 STEC isolates lacked the accessory virulence genes eae and hlyA. Although 115 (7%) of the carcass broths were PCR-positive, no STEC isolates were recovered from the 1650 carcasses sampled. Our data indicate that multiple non-O157 STEC serotypes may be present in cattle feces, yet are unlikely to be recovered from the corresponding beef carcasses when 20 colonies per sample from PCR-positive broth cultures are analyzed. PMID:17695600
Muscle profiling to improve the value of retail meat cuts.
Jung, E Y; Hwang, Y H; Joo, S T
2016-10-01
Nutrition and meat quality are always important to consumers, but vary by individual muscle or muscle groups in retail meat cuts. Muscle profiling of nutrient content and palatability for all retail beef cuts is necessary to suggest healthy and tasty beef cuts and to inform consumers of the benefits of beef consumption. The current paper reviews numerous studies that provide muscle profiles for nutrients and palatability attributes of muscles or muscle groups in retail beef cuts. The composition of nutrients including protein, fat, moisture, vitamins, and minerals in beef cuts is documented as well as the nutritive role as a part of a healthy diet. In addition, this review presents knowledge in relation to innovative carcass fabrication and value-added cuts to improve the value of beef carcass. Finally, the current work emphasize the palatability assessment of individual beef muscles, and concludes that all retail beef cuts should be merchandised for proper cooking according to the palatability profiles of beef muscles. Copyright © 2016 Elsevier Ltd. All rights reserved.
Nampanya, Sonevilay; Khounsy, Syseng; Phonvisay, Aloun; Bush, Russell David; Windsor, Peter Andrew
2015-04-01
This study determined the carcass composition of Lao indigenous buffalo (Bubalus bubalis) and cattle (Bos indicus), then examined trends in bovine meat marketing following review of records of beef production and prices in the two major cities of Luang Prabang (LPB) and Xieng Khoung (XK) provinces in northern Laos. Samples from 41 buffalo and 81 cattle (n = 122) were collected from animals slaughtered in May-June 2014, with live weights, carcass weights and other carcass-related variables collected. The animals were classified into four age cohort groups (<2, 2-<4, 4-6 and >6 years) with quantitative and dichotomous qualitative traits determined. There were significant differences in buffalo and cattle predicted mean carcass weights between age classification categories (p = 0.003 and 0.001) but not in dressing percentages (p = 0.1 and 0.1). The carcass weight of buffalo was 104 (±23.1)-176 (±12.0) kg compared to 65 (±8.7)-84 (±6.5) kg of cattle, with dressing percentages of 37-40 and 39-42 %, respectively. Despite an average bovine meat price increase of 42-48 % between 2011 and 2013, there was a reduction in the numbers of large ruminants slaughtered in the surveyed cities of LPB (11 %) and XK (7 %), with bovine meat availability per person of 5.2-6.6 kg (LPB) and 3.0-3.8 kg (XK). Improving the sustainability of the bovine meat supply in Laos requires a systems approach involving improvements to animal health and production, livestock marketing, plus the critical development of improved slaughterhouse facilities enabling a meat-processing sector to emerge. This development pathway is of particular importance for building the capacity of Laos to reduce food insecurity and alleviate the poverty of its largely rural smallholder community.
The microbiology of beef carcasses and primals during chilling and commercial storage.
Reid, Rachael; Fanning, Séamus; Whyte, Paul; Kerry, Joe; Lindqvist, Roland; Yu, Zhongyi; Bolton, Declan
2017-02-01
The primary objective of this study was to characterise (microbiology and physical parameters) beef carcasses and primals during chilled storage. A minor aim was to compare observed growth of key spoilage bacteria on carcasses with that predicted by ComBase and the Food Safety Spoilage Predictor (FSSP). Total viable count (TVC), total Enterobacteriacae count (TEC), Pseudomonas spp., lactic acid bacteria (LAB), Brochothrix thermosphacta and Clostridium spp. were monitored on beef carcasses (n = 30) and primals (n = 105) during chilled storage using EC Decision 2001/471/EC and ISO sampling/laboratory procedures. The surface and/or core temperature, pH and water activity (a w ) were also recorded. Clostridium (1.89 log 10 cfu/cm 2 ) and Pseudomonas spp. (2.12 log 10 cfu/cm 2 ) were initially the most prevalent bacteria on carcasses and primals, respectively. The shortest mean generation time (G) was observed on carcasses with Br. thermosphacta (20.3 h) and on primals with LAB (G = 68.8 h) and Clostridium spp. (G = 67 h). Over the course of the experiment the surface temperature decreased from 37 °C to 0 °C, pH from 7.07 to 5.65 and a w from 0.97 to 0.93 The observed Pseudomonas spp. and Br. thermosphacta growth was more or less within the range of predictions of Combase. In contrast, the FSSP completely overestimated the growth of LAB. This study contributes to the very limited microbiological data on beef carcasses and primals during chilling. Copyright © 2016 Elsevier Ltd. All rights reserved.
Liang, W; Zhang, H L; Liu, Y; Lu, B C; Liu, X; Li, Q; Cao, Y
2014-03-17
Growth and carcass traits are economically important quality characteristics of beef cattle and are complex quantitative traits that are controlled by multiple genes. In this study, 2 candidate genes, H-FABP (encoding the heart fatty acid-binding protein) and PSMC1 (encoding the proteasome 26S subunit of ATPase 1) were investigated in Qinchuan beef cattle of China. PCR-SSCP and DNA sequencing methods were used to detect mutations in the H-FABP and PSMC1 genes in Qinchuan cattle, and a T>C mutation in exon 1 of H-FABP and a T>C mutation in exon 9 of PSMC1 were identified. The association of these 2 single nucleotide polymorphisms with growth and carcass traits of Qinchuan cattle was analyzed. The T>C mutation in H-FABP was significantly associated with body length and dressing percentage (P < 0.05) and the T>C mutation in PSMC1 with body length and hip width (P < 0.05), indicating that both of the 2 mutations in H-FABP and PSMC1 had effects on growth and carcass traits in the Qinchuan beef cattle breed. Thus, the results of our study suggest that the H-FABP and PSMC1 gene polymorphisms could be used as genetic markers in marker-assisted selection for improving Qinchuan beef cattle.
Super shedding of Escherichia coli O157:H7 by cattle and the impact on beef carcass contamination.
Arthur, Terrance M; Brichta-Harhay, Dayna M; Bosilevac, Joseph M; Kalchayanand, Norasak; Shackelford, Steven D; Wheeler, Tommy L; Koohmaraie, Mohammad
2010-09-01
Beef carcass contamination is a direct result of pathogen transfer from cattle hides harboring organisms such as enterohemorrhagic Escherichia coli. Hide contamination occurs from direct and indirect fecal contamination in cattle production and lairage environments. In each of these environments, individual animals shedding E. coli O157:H7 at high levels (>10(4) CFU/g of feces, hereafter referred to as "super shedders") can have a disproportionate effect on cattle hide and subsequent carcass contamination. It is not known what criteria must be met to cause an animal to shed at levels exceeding 10(4) CFU/g. Understanding the factors that play a role in super shedding will aid in minimizing or eliminating the super shedding population. Interventions that would prevent super shedding in the cattle population should reduce E. coli O157:H7 transmission in the production and lairage environments resulting in reduced risk of beef carcass contamination and a safer finished product.
Hunt, M R; Garmyn, A J; O'Quinn, T G; Corbin, C H; Legako, J F; Rathmann, R J; Brooks, J C; Miller, M F
2014-09-01
Consumer sensory analysis was conducted to determine differences in beef palatability between two quality grade categories [Upper 2/3 (Top) Choice and Select] and four muscles [longissimus lumborum (LL), gluteus medius (GM), serratus ventralis (SV), and semimembranosus (SM)]. Generally, tenderness, flavor, and overall liking scores were more desirable for Top Choice compared to Select, regardless of muscle. Consumers rated LL as more tender (P<0.05) than SV and SM, but similar to GM (P=0.52). Overall and flavor acceptability were similar (P>0.05) between LL, GM, and SV, regardless of quality grade. Consumer overall liking was most highly correlated with flavor liking (r=0.85). When tenderness was acceptable, flavor and juiciness played a major role in determining overall acceptability. Overall liking of GM and SV from Top Choice carcasses was superior to LL from Select carcasses and comparable to LL from Top Choice carcasses. Copyright © 2014 Elsevier Ltd. All rights reserved.
Arthur, Terrance M; Barkocy-Gallagher, Genevieve A; Rivera-Betancourt, Mildred; Koohmaraie, Mohammad
2002-10-01
Beef carcass sponge samples collected from July to August 1999 at four large processing plants in the United States were surveyed for the presence of non-O157 Shiga toxin-producing Escherichia coli (STEC). Twenty-eight (93%) of 30 single-source lots surveyed included at least one sample containing non-O157 STEC. Of 334 carcasses sampled prior to evisceration, 180 (54%) were found to harbor non-O157 STEC. Non-O157 STEC isolates were also recovered from 27 (8%) of 326 carcasses sampled after the application of antimicrobial interventions. Altogether, 361 non-O157 STEC isolates, comprising 41 different O serogroups, were recovered. O serogroups that previously have been associated with human disease accounted for 178 (49%) of 361 isolates. Although 40 isolates (11%) carried a combination of virulence factor genes (enterohemorrhagic E. coli hlyA, eae, and at least one stx gene) frequently associated with STEC strains causing severe human disease, only 12 of these isolates also belonged to an O serogroup previously associated with human disease. Combining previously reported data on O157-positive samples (R. O. Elder, J. E. Keen, G. R. Siragusa, G. A. Barkocy-Gallagher, M. Koohmaraie, and W. W. Laegreid, Proc. Natl. Acad. Sci. USA 97:2999-3003, 2000) with these data regarding non-O157-positive samples indicated total STEC prevalences of 72 and 10% in preevisceration and postprocessing beef carcass samples, respectively, showing that the interventions used by the beef-processing industry effected a sevenfold reduction in carcass contamination by STEC.
Genome-wide association analyses for carcass quality in crossbred beef cattle
2013-01-01
Background Genetic improvement of beef quality will benefit both producers and consumers, and can be achieved by selecting animals that carry desired quantitative trait nucleotides (QTN), which result from intensive searches using genetic markers. This paper presents a genome-wide association approach utilizing single nucleotide polymorphisms (SNP) in the Illumina BovineSNP50 BeadChip to seek genomic regions that potentially harbor genes or QTN underlying variation in carcass quality of beef cattle. This study used 747 genotyped animals, mainly crossbred, with phenotypes on twelve carcass quality traits, including hot carcass weight (HCW), back fat thickness (BF), Longissimus dorsi muscle area or ribeye area (REA), marbling scores (MRB), lean yield grade by Beef Improvement Federation formulae (BIFYLD), steak tenderness by Warner-Bratzler shear force 7-day post-mortem (LM7D) as well as body composition as determined by partial rib (IMPS 103) dissection presented as a percentage of total rib weight including body cavity fat (BDFR), lean (LNR), bone (BNR), intermuscular fat (INFR), subcutaneous fat (SQFR), and total fat (TLFR). Results At the genome wide level false discovery rate (FDR < 10%), eight SNP were found significantly associated with HCW. Seven of these SNP were located on Bos taurus autosome (BTA) 6. At a less stringent significance level (P < 0.001), 520 SNP were found significantly associated with mostly individual traits (473 SNP), and multiple traits (47 SNP). Of these significant SNP, 48 were located on BTA6, and 22 of them were in association with hot carcass weight. There were 53 SNP associated with percentage of rib bone, and 12 of them were on BTA20. The rest of the significant SNP were scattered over other chromosomes. They accounted for 1.90 - 5.89% of the phenotypic variance of the traits. A region of approximately 4 Mbp long on BTA6 was found to be a potential area to harbor candidate genes influencing growth. One marker on BTA25 accounting for 2.67% of the variation in LM7D may be worth further investigation for the improvement of beef tenderness. Conclusion This study provides useful information to further assist the identification of chromosome regions and subsequently genes affecting carcass quality traits in beef cattle. It also revealed many SNP that acted pleiotropically to affect carcass quality. This knowledge is important in selecting subsets of SNP to improve the performance of beef cattle. PMID:24024930
Effects of polyethylene film wrap on cooler shrink and the microbial status of beef carcasses.
Sampaio, Guilherme S L; Pflanzer-Júnior, Sérgio B; Roça, Roberto de O; Casagrande, Leandro; Bedeschi, Elaine A; Padovani, Carlos R; Miguel, Giulianna Z; Santos, Carolina T; Girão, Lucio V C; Miranda, Zander B; Franco, Robson M
2015-02-01
The present study evaluated the use of polyethylene film wrapping of beef half carcasses and its effects on cooler shrink, cooling characteristics and microbial status of the half carcasses. Film wrapping reduced cooler shrink by 55.2%, 43.1%, 36.0% and 30% after 24, 48, 72 and 96 h of cooling, respectively, compared to the unwrapped half carcasses, whereas the surface water activity showed no significant differences among the time periods. The wrapped half carcasses had a lower cooling rate and higher surface and internal temperatures. The highest values of the aerobic mesophiles, Staphylococcus aureus and Enterobacteriaceae were found in the half carcasses wrapped in film. No significant differences were found in the values of Escherichia coli. The polyethylene film was effective in reducing cooler shrink; however, it caused a delay in cooling, thereby enabling greater microbial occurrences and counts and impairing the hygienic and sanitary conditions of the carcasses, which may be an impediment to the practical application of this technology.
Influence of body condition score on live and carcass value of cull beef cows.
Apple, J K
1999-10-01
Mature beef cows (n = 88) were slaughtered to determine the influence of body condition score (BCS) on carcass and live animal value. Cows were weighed and assigned a BCS (9-point scale), 24 h before slaughter. Hide and by-products weights were recorded during harvest. After a 48-h chill period, the right side of each carcass was fabricated into boneless subprimal cuts, minor cuts, lean trim, fat, and bone. Weights were recorded at all stages of fabrication. Carcass values (U.S.$/100 kg of hot carcass weight) were calculated for U.S. Utility and U.S. Cutter grades, as well as for the Utility/Cutter mix for each BCS. Gross value included the carcass value and the value of the hide and byproducts, whereas net value was calculated after harvest and fabrication costs and by-product value were considered. Live value (U.S.$/100 kg of live weight) was computed by dividing the net value by the animal's live weight 24 h before harvest. The value of the hide and by-products for BCS-2 cows was greater (P<.05) than for cows assigned a BCS of 3 through 8. Even though U.S. Utility carcasses from BCS-8 cows produced the least (P<.05) valuable subprimal cuts from the chuck, loin, and round, the gross and net values of BCS-8 cows were greater (P<.05) than those of BCS-3, 4, 5, and 6. Within the grade of U.S. Cutter, carcasses from BCS-6 cows had the highest (P<.05), and BCS-2 cows had the lowest (P<.05), gross and net values. Across the U.S. Utility/Cutter mix, cows designated with a BCS of 7 and 8 had greater (P<.05) gross and net values than cows assigned a BCS of 6, or lower. Live value increased linearly (P = .0002) from a low of $76.10/100 kg for BCS-2 cows to a high of $90.84/100 kg for BCS-7 cows. Carcasses from BCS-6 cows were relatively lean (8.4 mm of fat opposite of the longissimus muscle), and approximately 73% of the carcasses achieved a quality grade of U.S. Utility. Moreover, carcasses from BCS-6 cows had the highest total carcass values and live values comparable (P>.05) to BCS-7 cows. Information from this study can be used by the non-fed beef industry to establish a value-based marketing system. Data from this study would indicate that marketing cull beef cows at a BCS of 6 could optimize economic returns to both cow-calf producers and non-fed beef packers.
He, L; Yang, J; Chen, W; Zhou, Z; Wu, H; Meng, Q
2018-03-01
As lack of forage resource, alternative roughage sources have been developed for ruminant production and their inclusion would exert a great effect on the dietary nutrition, consequently affecting animal performance. Four silages (corn silage (CS), corn stalk silage (SS), inoculated CS and inoculated SS) were separately offered to 60 Bohai Black cattle (15 cattle/group) during a 24-week finishing period, in which the growth performance, carcass trait, beef quality and oxidative stability of steers were determined. Neither silage material nor silage inoculant exerted a significant effect on the growth performance, carcass trait and oxidative stability of beef cattle (P>0.05). As to beef quality, cattle offered CS had higher (P0.05) on the proximate components and fatty acids profile of beef muscle. There was neither an interaction (P>0.05) between inoculated treatment and silage material. There were no differences (P>0.05) in cholesterol content and meat quality traits in animals fed alternative silages. The collective findings suggest that it is not economical to substitute high-quality forage for relative low-quality forage in a high-concentrate finishing ration of beef cattle and silage inoculant inclusion would not exert a direct effect on animal performance.
Brusa, Victoria; Restovich, Viviana; Galli, Lucía; Teitelbaum, David; Signorini, Marcelo; Brasesco, Hebe; Londero, Alejandra; García, Diego; Padola, Nora Lía; Superno, Valeria; Sanz, Marcelo; Petroli, Sandra; Costa, Magdalena; Bruzzone, Mariana; Sucari, Adriana; Ferreghini, Marcela; Linares, Luciano; Suberbie, Germán; Rodríguez, Ricardo
2017-01-01
Several foods contaminated with Shiga toxin-producing Escherichia coli (STEC) are associated with human diseases. Some countries have established microbiological criteria for non-O157 STEC, thus, the absence of serogroups O26, O45, O103, O104, O111, O121, and O145 in sprouts from the European Union or ground beef and beef trimmings from the United States is mandatory. While in Argentina screening for O26, O103, O111, O145 and O121 in ground beef, ready-to-eat food, sausages and vegetables is mandatory, other countries have zero-tolerance for all STEC in chilled beef. The aim of this study was to provide data on the prevalence of non-O157 STEC isolated from beef processed in eight Argentinean cattle slaughterhouses producing beef for export and local markets, and to know the non-O157 STEC profiles through strain characterization and genotypic analysis. Samples (n = 15,965) from 3,205 beef carcasses, 9,570 cuts and 3,190 trimmings collected between March and September 2014 were processed in pools of five samples each. Pools of samples (n = 3,193) from 641 carcasses, 1,914 cuts and 638 trimming were analyzed for non-O157 STEC isolation according to ISO/CEN 13136:2012. Of these, 37 pools of carcasses (5.8%), 111 pools of cuts (5.8%) and 45 pools of trimmings (7.0%) were positive for non-O157 STEC. STEC strains (n = 200) were isolated from 193 pools of samples. The most prevalent serotypes were O174:H21, O185:H7, O8:H19, O178:H19 and O130:H11, and the most prevalent genotypes were stx2c(vh-b) and stx2a/saa/ehxA. O103:H21 strain was eae-positive and one O178:H19 strain was aggR/aaiC-positive. The prevalence of non-O157 STEC in beef carcasses reported here was low. None of the non-O157 STEC strains isolated corresponded to the non-O157 STEC serotypes and virulence profiles isolated from human cases in Argentina in the same study period. The application of microbiological criteria for each foodstuff should be determined by risk analysis in order to have a stringent monitoring system. Likewise, zero-tolerance intervention measures should be applied in beef, together with GMP and HACCP. Further, collaborative efforts for risk assessment, management and communication are extremely important to improve the safety of foodstuffs. PMID:28829794
Mao, F; Chen, L; Vinsky, M; Okine, E; Wang, Z; Basarab, J; Crews, D H; Li, C
2013-05-01
Feed efficiency is of particular importance to the beef industry, as feed costs represent the single largest variable cost in beef production systems. Selection for more efficient cattle will lead to reduction of feed related costs, but should not have adverse impacts on quality of the carcass. In this study, we evaluated phenotypic and genetic correlations of residual feed intake (RFI), RFI adjusted for end-of-test ultrasound backfat thickness (RFIf), and RFI adjusted for ultrasound backfat thickness and LM area (RFIfr) with growth, ultrasound, and carcass merit traits in an Angus population of 551 steers and in a Charolais population of 417 steers. In the Angus steer population, the phenotypic and genetic correlation of RFI with carcass merit traits including HCW, carcass backfat, carcass LM area, lean meat yield, and carcass marbling were not significant or weak with correlations coefficients ranging from -0.0007 ± 0.05 to 0.18 ± 0.21. In the Charolais steer population, the phenotypic and genetic correlations of RFI with the carcass merit traits were also weak, with correlation coefficients ranging from -0.07 ± 0.06 to 0.19 ± 0.18, except for the genetic correlation with carcass average backfat, which was moderate with a magnitude of 0.42 ± 0.29. Inclusion of ultrasound backfat thickness in the model to predict the expected daily DMI for maintenance explained on average an additional 0.5% variation of DMI in the Angus steers and 2.3% variation of DMI in the Charolais steer population. Inclusion of both the ultrasound backfat and LM area in the model explained only 0.7% additional variance in DMI in the Angus steer population and only 0.6% in the Charolais steer population on top of the RFIf model. We concluded that RFIf adjusted for ultrasound backfat at the end of the test will lead to decreases of both the phenotypic and genetic correlations with carcass backfat and marbling score to a greater extent for late-maturing beef breeds such as Charolais than for early-maturing beef breeds such as Angus. However, further inclusion of ultrasound LM area on top of the final ultrasound backfat in the model of calculating RFI had little effect in reducing the correlations of RFI with the carcass merit traits.
Bruce, H L; Stark, J L; Beilken, S L
2004-06-01
Beef from cattle finished on grass will be of similar quality to that from cattle finished on grain when their carcasses are processed using best practice protocols. To test this hypothesis, carcasses of twenty Brahman steers, finished to 400 kg live weight on either Buffel grass pasture (n=10) or grain (n=10), were electrically stimulated with 400 V for 50 s 45 min postmortem, and their beef quality assessed 1 and 14 days postmortem. Hot weight, rump subcutaneous fat thickness and animal rate of growth in the 205 days preceding slaughter were recorded for each carcass as potential influences on beef quality. Quality of the M. longissimus thoracis (LT) at 1 and 14 days postmortem was evaluated using peak Warner-Bratzler shear force, compression, pH, cooking loss and taste panel acceptability, as well as by moisture and crude fat contents measured at 1 day postmortem. Results showed that steers finished on pasture grew the slowest and had the least subcutaneous fat at the same carcass weight. LT from carcasses of steers finished on pasture also had the shortest mean sarcomere lengths, suggesting these muscles may have been cold-affected, but there was no effect of diet on peak shear force. LT from carcasses of steers finished on pasture had the highest mean compression value, possibly because of increased collagen cross-linking associated with slow growth or increased exercise. Ageing significantly decreased LT peak shear force and compression values and increased cooking loss, L (∗), a (∗) and b (∗) values. Taste panellists rated the aged, grass-finished beef the most tender and the best quality; however, the taste panel in this study may have favoured LT from grass-finished steers because it was significantly juicier than LT from the grain-finished steer carcasses. These results indicated that carcass composition and processing conditions interact to exert a greater effect on LT toughness and sensory acceptability than finishing diet. Ageing LT from steers finished on grass improved its colour, and thus may enhance its consumer acceptability.
Sakamoto, L S; Mercadante, M E Z; Bonilha, S F M; Branco, R H; Bonilha, E F M; Magnani, E
2014-11-01
Data from 156 Nellore males were used to develop equations for the prediction of retail beef yield and carcass fat content, expressed as kilograms and as a percentage, from live animal and carcass measurements. Longissimus muscle area and backfat and rump fat thickness were measured by ultrasound up to 5 d before slaughter and fasted live weight was determined 1 d before slaughter. The same traits were obtained after slaughter. The carcass edible portion (CEP in kg and CEP% in percentage; n = 116) was calculated by the sum of the edible portions of primal cuts: hindquarter, forequarter, and spare ribs. Trimmable fat from the carcass boning process, with the standardization of about 3 mm of fat on retail beef, was considered to be representative of carcass fat content. Most of the variation in CEP was explained by fasted live weight or carcass weight (R(2) of 0.92 and 0.96); the same occurred for CEP% (R(2) of 0.15 and 0.13), and for CEP, the inclusion of LM area and fat thickness reduced the equation bias (lower value of Mallow's Cp statistics). For trimmable fat, most variation could be explained by weight or rump fat thickness. In general, the equations developed from live animal measurements showed a predictive power similar to the equations using carcass measurements. In all cases, the traits expressed as kilograms were better predicted (R(2) of 0.39 to 0.96) than traits expressed as a percentage (R(2) of 0.08 to 0.42).
Valuing Fed Cattle Using Objective Tenderness Measures
USDA-ARS?s Scientific Manuscript database
Beef tenderness is critical in consumer satisfaction with beef steak products. Current fed cattle valuation systems do not differentiate carcasses based upon tenderness variation. However, considerable research indicates consumers are willing to pay more for tender relative to tough beef steak. T...
Gill, C O; McGinnis, J C; Bryant, J
1998-07-21
The microbiological effects on the product of the series of operations for skinning the hindquarters of beef carcasses at three packing plants were assessed. Samples were obtained at each plant from randomly selected carcasses, by swabbing specified sites related to opening cuts, rump skinning or flank skinning operations, randomly selected sites along the lines of the opening cuts, or randomly selected sites on the skinned hindquarters of carcasses. A set of 25 samples of each type was collected at each plant, with the collection of a single sample from each selected carcass. Aerobic counts, coliforms and Escherichia coli were enumerated in each sample, and a log mean value was estimated for each set of 25 counts on the assumption of a log normal distribution of the counts. The data indicated that the hindquarters skinning operations at plant A were hygienically inferior to those at the other two plants, with mean numbers of coliforms and E. coli being about two orders of magnitude greater, and aerobic counts being an order of magnitude greater on the skinned hindquarters of carcasses from plant A than on those from plants B or C. The data further indicated that the operation for cutting open the skin at plant C was hygienically superior to the equivalent operation at plant B, but that the operations for skinning the rump and flank at plant B were hygienically superior to the equivalent operations at plant C. The findings suggest that objective assessment of the microbiological effects on carcasses of beef carcass dressing processes will be required to ensure that Hazard Analysis: Critical Control Point and Quality Management Systems are operated to control the microbiological condition of carcasses.
Jericho, K W; O'Laney, G; Kozub, G C
1998-10-01
To enhance food safety and keeping quality, beef carcasses are cooled immediately after leaving the slaughter floor. Within hazard analysis and critical control point (HACCP) systems, this cooling process needs to be monitored by the industry and verified by regulatory agencies. This study assessed the usefulness of the temperature-function integration technique (TFIT) for the verification of the hygienic adequacy of two cooling processes for beef carcasses at one abattoir. The cooling process passes carcasses through a spray cooler for at least 17 h and a holding cooler for at least 7 h. The TFIT is faster and cheaper than culture methods. For spray cooler 1, the Escherichia coli generations predicted by TFIT for carcass surfaces (pelvic and shank sites) were compared to estimated E. coli counts from 120 surface excision samples (rump, brisket, and sacrum; 5 by 5 by 0.2 cm) before and after cooling. Counts of aerobic bacteria, coliforms, and E. coli were decreased after spray cooler 1 (P < or = 0.001). The number of E. coli generations (with lag) at the pelvic site calculated by TFIT averaged 0.85 +/- 0.19 and 0.15 +/- 0.04 after emerging from spray coolers 1 and 2, respectively. The TFIT (with lag) was considered convenient and appropriate for the inspection service to verify HACCP systems for carcass cooling processes.
Associations of polymorphisms in the Pit-1 gene with growth and carcass traits in Angus beef cattle.
Zhao, Q; Davis, M E; Hines, H C
2004-08-01
The Pit-1 gene was studied as a candidate for genetic markers of growth and carcass traits. Angus beef cattle that were divergently selected for high- or low-blood serum IGF-I concentration were used in this study. The single-strand conformation polymorphism method was used to identify polymorphism in the Pit-1 gene including regions from intron 2 to exon 6. Two polymorphisms, Pit1I3H (HinfI) and Pit1I3NL (NlaIII), were detected in intron 3 of the Pit-1 gene. One polymorphism, Pit1I4N (BstNI), was found in intron 4, and a single nucleotide polymorphism, Pit1I5, was found in intron 5. The previously reported polymorphism in exon 6, Pit1E6H (HinfI), was also studied in 416 Angus beef cattle. Associations of the polymorphisms with growth traits, carcass traits, and IGF-I concentration were analyzed using a general linear model procedure. No significant associations were observed between these polymorphisms and growth and carcass traits.
Utama, Dicky Tri; Choi, Ji Hye; Lee, Chang Woo; Park, Yeon Soo; Lee, Sung Ki
2017-01-01
This study was aim to observe the effects of feeding mixed local hay (MH) consisted of 55% orchard grass ( Dactylis glomerata L.), 35% tall fescue ( Festuca arundinacea ) and 10% red clover ( Trifolium pratense ) to Hanwoo steers on performance, carcass characteristics and meat quality ( longissimus thoracis ) compared with feeding imported timothy hay (TH) and local rice straw (RS). Although no significant effects were found on animal performance and carcass yield grade, the carcasses of MH group had higher marbling score and quality grade than those of RS and TH group ( P < 0.05). Therefore, higher fat content ( P < 0.001), lower shear force and hardness value in the beef of MH group than that of other groups were observed. Furthermore, the beef of MH group had higher CIE a* value (redness) than that of other groups and feeding MH to Hanwoo steers lowered n-6 to n-3 fatty acids ratio in beef. Mixed hay provided benefits on meat quality and could be used for Hanwoo fattening program.
Englishby, Tanya M; Moore, Kirsty L; Berry, Donagh P; Coffey, Mike P; Banos, Georgios
2017-07-01
Abattoir data are an important source of information for the genetic evaluation of carcass traits, but also for on-farm management purposes. The present study aimed to quantify the contribution of herd environment to beef carcass characteristics (weight, conformation score and fat score) with particular emphasis on generating finishing herd-specific profiles for these traits across different ages at slaughter. Abattoir records from 46,115 heifers and 78,790 steers aged between 360 and 900days, and from 22,971 young bulls aged between 360 and 720days, were analysed. Finishing herd-year and animal genetic (co)variance components for each trait were estimated using random regression models. Across slaughter age and gender, the ratio of finishing herd-year to total phenotypic variance ranged from 0.31 to 0.72 for carcass weight, 0.21 to 0.57 for carcass conformation and 0.11 to 0.44 for carcass fat score. These parameters indicate that the finishing herd environment is an important contributor to carcass trait variability and amenable to improvement with management practices. Copyright © 2017 Elsevier Ltd. All rights reserved.
Application of imaging and ultrasound to the quality grading of beef
NASA Astrophysics Data System (ADS)
Anselmo, V. J.; Gammell, P. M.
1980-04-01
The results of a study conducted to assist the Department of Agriculture in the task of considering innovative methods for the grading of carcass beef for human consumption is presented. The processing of photographic, television and ultrasound images of the longissimus dorsi muscle at the 12/13th rib cut was undertaken. The results showed that a correlation could be developed between the quality grade of the carcass as determined by a professional grader, and the fat to area ratio of the muscle as determined by image processing techniques. In addition, the use of ultrasound shows the potential for grading of an unsliced carcass or a live animal.
Application of imaging and ultrasound to the quality grading of beef
NASA Technical Reports Server (NTRS)
Anselmo, V. J.; Gammell, P. M.
1980-01-01
The results of a study conducted to assist the Department of Agriculture in the task of considering innovative methods for the grading of carcass beef for human consumption is presented. The processing of photographic, television and ultrasound images of the longissimus dorsi muscle at the 12/13th rib cut was undertaken. The results showed that a correlation could be developed between the quality grade of the carcass as determined by a professional grader, and the fat to area ratio of the muscle as determined by image processing techniques. In addition, the use of ultrasound shows the potential for grading of an unsliced carcass or a live animal.
NASA Technical Reports Server (NTRS)
Anselmo, Victor J.; Gammell, Paul M.; Clark, Jerry
1987-01-01
Two proposed methods for grading beef quality based on inspection by electronic equipment: one method uses television camera to generate image of a cut of beef as customer sees it; other uses ultrasonics to inspect live animal or unsliced carcasses. Both methods show promise for automated meat inspection.
Streiter, P J; Campbell, C P; Mandell, I B
2012-12-01
Sixty-two cull beef cows were slaughtered to investigate effects of skeletal separation and moisture enhancement on beef eating quality. Muscles from each carcass side were randomly assigned to 1) no postmortem processing (NPP), 2) prerigor skeletal separation (SS), 3) moisture enhancement (ME) using calcium ascorbate or 4) a combination of SS and ME (SS/ME). Postmortem processing treatment (PPT) by ageing (PM) interactions (P<0.01) for shear force were present for longissimus. As PM ageing increased from 7 to 21 d, there was a greater decrease (P<0.05) in shear force with NPP vs. all other PPT. Trained taste panellists found SS, ME and SS/ME improved (P<0.05) palatability attributes vs. NPP. An additive effect of combining SS and ME improved palatability traits versus SS or ME alone. Panellists found no differences (P>0.14) in softness and tenderness between SS/ME and Canadian AA or AAA beef. Postmortem processing of beef cows may produce beef as tender and juicy as beef from younger carcasses. Copyright © 2012 Elsevier Ltd. All rights reserved.
Visvalingam, Jeyachchandran; Liu, Yang; Yang, Xianqin
2017-03-06
The objective of this study was to examine the effect of dry chilling on the genetic diversity of naturally occurring Escherichia coli on beef carcasses, and to examine whether two populations of E. coli recovered from carcasses during chilling and E. coli O157 differed in their response to desiccation. Isolates of E. coli were obtained from beef carcasses during a 67h dry chilling process and were genotyped using multiple-locus variable-number tandem-repeat analysis (MLVA). Ten E. coli genotypes found only at 0h (group A) and found more than once (group B), as well as five strains of E. coli O157 (group C) were inoculated on stainless steel coupons and their survival was examined after exposure to 75 and 100% relative humidity (RH) at 0 or 35°C for 67h. A total of 450 E. coli isolates were obtained, with 254, 49, 49, 51, 23, 20, and 4 from 0, 1, 2, 4, 6, 8 and 24h of chilling, respectively. No E. coli were recovered at 67h. MLVA of the isolates revealed 173 distinct genotypes. Genetic diversity of E. coli isolates, defined as ratio of the number of isolates to the number of genotypes, remained between 2.3 and 1.3 during the 24h of chilling. All strains inoculated on stainless steel coupons and exposed to 75% RH at 35°C were completely inactivated, irrespective of their groups. Inactivation of E. coli of the three groups was not significantly (P>0.05) different by exposure to 75% RH at 0°C. The findings indicate that the genetic diversity of E. coli on beef carcasses was not affected by dry chilling. In addition, inactivation of E. coli genotypes and E. coli O157 by desiccation on stainless steel simulating dry chilling conditions did not differ significantly (P>0.05). Thus, dry chilling may be used as an effective antimicrobial intervention for beef carcasses. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.
USDA-ARS?s Scientific Manuscript database
Beef nutrition is very important to the worldwide beef industry and its consumers. The objective of this study was to analyze nutrient composition of eight beef rib and plate cuts to update the nutrient data in the USDA National Nutrient Database for Standard Reference (SR). Seventy-two carcasses ...
Effects of organic acid-surfactant mixtures on levels of bacteria and beef quality traits
USDA-ARS?s Scientific Manuscript database
Introduction: Organic acid efficacy as an antimicrobial treatment of beef carcass surfaces may be increased through the addition of surfactants. However, the effects of antimicrobial-surfactant mixtures on beef quality traits such as flavor and color stability may make their use unacceptable. Purp...
Influence of mitochondrial efficiency on beef lean color stability
USDA-ARS?s Scientific Manuscript database
Loss of electrons in the electron transport chain has been implicated as a source of variation in feed efficiency of meat producing animals. The present study was conducted to evaluate the effects of electron loss during electron transport on beef lean color stability. Beef carcasses (n = 91) were...
Semler, M L; Woerner, D R; Belk, K E; Enns, K J; Tatum, J D
2016-05-01
This study examined the effects of USDA carcass maturity on sensory properties of LM steaks produced by cattle representing 2 dental age classes. Carcasses identified for use in the experiment were produced by steers and heifers classified as either <30 mo of age (MOA) or ≥30 MOA at the time of slaughter using dentition. Within each dental age class, carcasses were selected to represent 2 maturity groups and 3 marbling categories, resulting in 12 dental age × maturity × marbling subclasses, each consisting of 50 carcasses. Maturity groups consisted of carcasses classified by USDA graders as either A to A (A) overall maturity or B to D (B-D) overall maturity; marbling categories consisted of carcasses with instrument marbling scores of Slight to Slight (SL), Small to Small (SM), or Modest to Moderate (MT-MD). Carcasses were selected in pairs so that each carcass chosen to represent the B-D-maturity group was paired with an A-maturity carcass of the same sex and marbling score (±50 marbling units). Strip loin (LM) steaks were obtained from both sides of each carcass. After a 14-d aging period, 1 LM steak was measured for Warner-Bratzler shear force (WBSF) and slice shear force (SSF), whereas the other LM steak was used for sensory analysis by a trained descriptive attribute panel. No differences ( > 0.05) in LM tenderness, juiciness, or flavor were detected between carcass maturity groups in either dental age class. Advanced dental age (≥30 MOA), however, was associated with more intense ( < 0.05) grassy and bloody/serumy flavors and decreased ( < 0.05) tenderness within the SL marbling group. Marbling score effectively stratified carcasses (MT-MD > SM > SL) according to differences ( < 0.0001) in LM tenderness, juiciness, beefy/brothy flavor, and buttery/beef fat flavor. In addition, increased marbling was associated with lesser ( < 0.01) intensities of bloody/serumy, livery/organy, and grassy flavors as well as smaller ( < 0.0001) values for WBSF and SSF. Results of this study suggest that USDA carcass maturity does not effectively identify differences in LM sensory attributes in the population of beef carcasses routinely offered for grading in today's U.S. commercial beef processing facilities.
Aslam, Mueen; Service, Cara
2006-07-01
The objective of this study was to investigate the extent of antimicrobial resistance and to genetically characterize resistant Escherichia coli recovered from a commercial beef packing plant. E. coli isolates were recovered by a hydrophobic grid membrane filtration method by direct plating on SD-39 medium. A total of 284 isolates comprising 71, 36, 55, 52, and 70 isolates from animal hides, washed carcasses, conveyers, beef trimmings, and ground beef, respectively, were analyzed. The susceptibility of E. coli isolates to 15 antimicrobial agents was evaluated with an automated broth microdilution system, and the genetic characterization of these isolates was performed by the random amplified polymorphic DNA (RAPD) method. Of the 284 E. coli isolates, 56% were sensitive to all 15 antimicrobial agents. Resistance to tetracycline, ampicillin, and streptomycin was observed in 38, 9, and 6% of the isolates, respectively. Resistance to one or more antimicrobial agents was observed in 51% of the E. coli isolates recovered from the hides but in only 25% of the E. coli from the washed carcasses. Resistance to one or more antimicrobial agents was observed in 49, 50, and 37% of the isolates recovered from conveyers, beef trimmings, and ground beef, respectively. The RAPD pattern data showed that the majority of resistant E. coli isolates were genetically diverse. Only a few RAPD types of resistant strains were shared among various sample sources. The results of this study suggest that antimicrobial-resistant E. coli isolates were prevalent during all stages of commercial beef processing and that considerably higher numbers of resistant E. coli were present on conveyers, beef trimmings, and ground beef than on dressed carcasses. This stresses the need for improving hygienic conditions during all stages of commercial beef processing and meatpacking to avoid the risks of transfer of antimicrobial-resistant bacteria to humans.
Moore, M C; Gray, G D; Hale, D S; Kerth, C R; Griffin, D B; Savell, J W; Raines, C R; Belk, K E; Woerner, D R; Tatum, J D; Igo, J L; VanOverbeke, D L; Mafi, G G; Lawrence, T E; Delmore, R J; Christensen, L M; Shackelford, S D; King, D A; Wheeler, T L; Meadows, L R; O'Connor, M E
2012-12-01
The 2011 National Beef Quality Audit (NBQA-2011) assessed the current status of quality and consistency of fed steers and heifers. Beef carcasses (n = 9,802), representing approximately 10% of each production lot in 28 beef processing facilities, were selected randomly for the survey. Carcass evaluation for the cooler assessment of this study revealed the following traits and frequencies: sex classes of steer (63.5%), heifer (36.4%), cow (0.1%), and bullock (0.03%); dark cutters (3.2%); blood splash (0.3%); yellow fat (0.1%); calloused rib eye (0.05%); overall maturities of A (92.8%), B (6.0%), and C or greater (1.2%); estimated breed types of native (88.3%), dairy type (9.9%), and Bos indicus (1.8%); and country of origin of United States (97.7%), Mexico (1.8%), and Canada (0.5%). Certified or marketing program frequencies were age and source verified (10.7%), ≤A(40) (10.0%), Certified Angus Beef (9.3%), Top Choice (4.1%), natural (0.6%), and Non-Hormone-Treated Cattle (0.5%); no organic programs were observed. Mean USDA yield grade (YG) traits were USDA YG (2.9), HCW (374.0 kg), adjusted fat thickness (1.3 cm), LM area (88.8 cm2), and KPH (2.3%). Frequencies of USDA YG distributions were YG 1, 12.4%; YG 2, 41.0%; YG 3, 36.3%; YG 4, 8.6%; and YG 5, 1.6%. Mean USDA quality grade (QG) traits were USDA quality grade (Select(93)), marbling score (Small(40)), overall maturity (A(59)), lean maturity (A(54)), and skeletal maturity (A(62)). Frequencies of USDA QG distributions were Prime, 2.1%; Choice, 58.9%; Select, 32.6%; and Standard or less, 6.3%. Marbling score distribution was Slightly Abundant or greater, 2.3%; Moderate, 5.0%; Modest, 17.3%; Small, 39.7%; Slight, 34.6%; and Traces or less, 1.1%. Carcasses with QG of Select or greater and YG 3 or less represented 85.1% of the sample. This is the fifth benchmark study measuring targeted carcass characteristics, and information from this survey will continue to help drive progress in the beef industry. Results will be used in extension and educational programs as teaching tools to inform beef producers and industry professionals of the current state of the U.S. beef industry.
Hietala, P; Juga, J
2017-04-01
Improving feed efficiency in dairy cattle could result in more profitable and environmentally sustainable dairy production through lowering feed costs and emissions from dairy farming. In addition, beef production based on dairy herds generates fewer greenhouse gas emissions per unit of meat output than beef production from suckler cow systems. Different scenarios were used to assess the profitability of adding traits, excluded from the current selection index for Finnish Ayrshire, to the breeding goal for combined dairy and beef production systems. The additional breeding goal traits were growth traits (average daily gain of animals in the fattening and rearing periods), carcass traits (fat covering, fleshiness and dressing percentage), mature live weight (LW) of cows and residual feed intake (RFI) traits. A breeding scheme was modeled for Finnish Ayrshire under the current market situation in Finland using the deterministic simulation software ZPLAN+. With the economic values derived for the current production system, the inclusion of growth and carcass traits, while preventing LW increase generated the highest improvement in the discounted profit of the breeding program (3.7%), followed by the scenario where all additional traits were included simultaneously (5.1%). The use of a selection index that included growth and carcass traits excluding LW, increased the profit (0.8%), but reduced the benefits resulted from breeding for beef traits together with LW. A moderate decrease in the profit of the breeding program was obtained when adding only LW to the breeding goal (-3.1%), whereas, adding only RFI traits to the breeding goal resulted in a minor increase in the profit (1.4%). Including beef traits with LW in the breeding goal showed to be the most potential option to improve the profitability of the combined dairy and beef production systems and would also enable a higher rate of self-sufficiency in beef. When considering feed efficiency related traits, the inclusion of LW traits in the breeding goal that includes growth and carcass traits could be more profitable than the inclusion of RFI, because the marginal costs of measuring LW can be expected to be lower than for RFI and it is readily available for selection. In addition, before RFI can be implemented as a breeding objective, the genetic correlations between RFI and other breeding goal traits estimated for the studied population as well as information on the most suitable indicator traits for RFI are needed to assess more carefully the consequences of selecting for RFI.
Performance, carcass and palatability characteristics of Longhorn and other types of cattle.
Adams, N J; Smith, G C; Carpenter, Z L
1982-07-01
Performance, carcass and palatability characteristics of Longhorn steers were compared with those of cattle currently popular in the United States-Hereford, Angus, Brahman, Holstein, two-breed crossbred (British beef breed crosses) and three-breed crossbred (1 4 dairy , 1 4 British beef and 1 2 European beef ) steers. Steers were fed roughage, then a growing diet (42 days), then a high energy (89% concentrate) diet (153 to 179 days by breed group) and slaughtered, individually, at USDA Choice finish or, failing that, after 186 days on the finishing diet. Data suggest that Longhorns, compared with types of cattle currently used: (1) are less desirable in physical appearance; (2) gain weight less rapidly, reaching the desired finish and slaughter weight as older animals; (3) convert feed to liveweight less efficiently; (4) deposit less subcutaneous fat, more internal fat, but essentially the same amount of intramuscular fat; (5) are as muscular (longissimus muscle area, estimated percentage of carcass muscle, muscle to bone ratio, muscle to fat ratio); (6) are as desirable in USDA quality grade and yield grade and (7) produce beef that is a palatable. Copyright © 1982. Published by Elsevier Ltd.
Varela-Hernández, J J; Cabrera-Diaz, E; Cardona-López, M A; Ibarra-Velázquez, L M; Rangel-Villalobos, H; Castillo, A; Torres-Vitela, M R; Ramírez-Alvarez, A
2007-01-25
The contamination of beef carcasses with Shiga toxin-producing O157:H7 and non-O157 Escherichia coli (STEC) obtained from a slaughter plant in Guadalajara, Mexico was investigated. A total of 258 beef carcasses were sampled during a 12-month period. All samples were assayed for STEC by selective enrichment in modified tryptone soy broth supplemented with cefixime, cefsulodin and vancomycin, followed by plating on Sorbitol MacConkey Agar supplemented with cefixime and tellurite (CT-SMAC). Simultaneously, all samples were assayed by immunomagnetic separation (IMS) and plated on CT-SMAC and CHROMagar. The presence of the stx1, stx2, eaeA and hly933 genes, recognized as major virulence factors of STEC, was tested for O157:H7 and non-O157 E. coli isolates by multiplex polymerase chain reaction (PCR). STEC was detected in two (0.8%) samples. One of these STEC isolates corresponded to the serotype O157:H7 showing stx2, eaeA and hyl933 genes. The other isolate corresponded to non-O157 STEC and only had the stx1 gene. Thirteen carcasses (5%) were positive for nonmotile E. coli O157 and 7 (2.7%) were positive for E. coli O157:H7. The presence of O157:H7 and non-O157 STEC on beef carcasses in this slaughter plant in Guadalajara, Mexico, emphasizes the importance of implementing the Hazard Analysis and Critical Control Point (HACCP) system, as well as the need for implementing, evaluating, and validating antimicrobial interventions to reduce the presence of potential pathogenic microorganisms.
Thompson, John
2002-11-01
This paper discusses the management of meat tenderness using a carcass grading scheme which utilizes the concept of total quality management of those factors which impact on beef palatability. The scheme called Meat Standards Australia (MSA) has identified the Critical Control Points (CCPs) from the production, pre-slaughter, processing and value adding sectors of the beef supply chain and quantified their relative importance using large-scale consumer testing. These CCPs have been used to manage beef palatability in two ways. Firstly, CCPs from the pre-slaughter and processing sectors have been used as mandatory criteria for carcasses to be graded. Secondly, other CCPs from the production and processing sectors have been incorporated into a model to predict palatability for individual muscles. The evidence for the importance of CCPs from the production (breed, growth path and HGP implants), pre-slaughter and processing (pH/temperature window, alternative carcass suspension, marbling and ageing) sectors are reviewed and the accuracy of the model to predict palatability for specific muscle×cooking techniques is presented.
Microbiological evaluation of groups of beef carcasses: heifers and steers.
Jericho, K W; Bradley, J A; Kozub, G C
1994-01-01
Numbers of mesophilic bacteria were estimated on carcasses of 25 heifers and 25 steers of beef breeds in a modern, high-line-speed abattoir. One side of each carcass from each sex was sampled at the end of the kill-floor, before the carcass wash, on each of 25 visits. Two adjacent excision samples (5 x 5 x 0.5 cm) were taken from each of ten sites and processed for automatic enumeration of aerobic bacteria on hydrophobic grid membrane filters. The effects of sex and carcass weight on bacterial counts were examined. Groups of carcasses were examined to determine the sample size required for future assessments of kill-floor hygiene. The log10 of the most probable number of growth units (MPNGU)/cm2 did not differ significantly between heifers and steers (average over the ten sites of 2.2) and there was no effect of carcass weight on bacterial counts for nine of the ten sites. There were, however, highly significant (p < 0.001) differences in the counts between sites and the counts from the ten sites clustered into five homogenous groups. The between-carcass component of variation at a site was generally larger than the within-carcass component. We conclude that, to estimate the mean log10 MPNGU/cm2 at a site to within +/- 0.5 units, future group-carcass evaluations require about 200 samples from 10 (two adjacent samples/site) or 20 carcasses (one sample/site). PMID:7954120
Salmonella spp. in lymph nodes of fed and cull cattle: Relative assessment of risk to ground beef
USDA-ARS?s Scientific Manuscript database
Ground beef products have been implicated as the vehicle for the transmission of Salmonella in a number of outbreaks. Although carcass surface interventions have proven effective, Salmonella contamination in ground beef still occurs. Recent studies indicate that deep tissue lymph nodes (DTLNs) may b...
Effect of degree of dark cutting on tenderness and flavor attributes of beef
USDA-ARS?s Scientific Manuscript database
The objective of this experiment was to determine the effects of degree of dark cutting (DC) on tenderness and flavor descriptive attributes of beef. During routine grading procedures at a large-scale U.S. beef harvesting facility, DC carcasses (n=160) and matching normal cohorts (NC; n=160; same ...
USDA-ARS?s Scientific Manuscript database
Several antimicrobial compounds have been implemented in commercial meat processing plants for decontamination of pathogens on beef carcasses, but there are many commercially available, novel antimicrobial compounds that may be more effective and suitable to be implemented in beef processing pathoge...
9 CFR 316.9 - Products to be marked with official marks.
Code of Federal Regulations, 2010 CFR
2010-01-01
... marks. 316.9 Section 316.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... liver, beef tongue, and beef heart which has been inspected and passed shall be marked with the official... round, flank, loin, rib, plate, brisket, chuck, and shank are primal parts of beef carcasses. Veal...
9 CFR 316.9 - Products to be marked with official marks.
Code of Federal Regulations, 2012 CFR
2012-01-01
... marks. 316.9 Section 316.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... liver, beef tongue, and beef heart which has been inspected and passed shall be marked with the official... round, flank, loin, rib, plate, brisket, chuck, and shank are primal parts of beef carcasses. Veal...
9 CFR 316.9 - Products to be marked with official marks.
Code of Federal Regulations, 2011 CFR
2011-01-01
... marks. 316.9 Section 316.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... liver, beef tongue, and beef heart which has been inspected and passed shall be marked with the official... round, flank, loin, rib, plate, brisket, chuck, and shank are primal parts of beef carcasses. Veal...
9 CFR 316.9 - Products to be marked with official marks.
Code of Federal Regulations, 2014 CFR
2014-01-01
... marks. 316.9 Section 316.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... liver, beef tongue, and beef heart which has been inspected and passed shall be marked with the official... round, flank, loin, rib, plate, brisket, chuck, and shank are primal parts of beef carcasses. Veal...
9 CFR 316.9 - Products to be marked with official marks.
Code of Federal Regulations, 2013 CFR
2013-01-01
... marks. 316.9 Section 316.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... liver, beef tongue, and beef heart which has been inspected and passed shall be marked with the official... round, flank, loin, rib, plate, brisket, chuck, and shank are primal parts of beef carcasses. Veal...
Simpson Beauchamp, Catherine; Dourou, Dimitra; Geornaras, Ifigenia; Yoon, Yohan; Scanga, John A; Belk, Keith E; Smith, Gary C; Nychas, George-John E; Sofos, John N
2012-06-01
Studies examined the effects of meat-contact material types, inoculation substrate, presence of air at the liquid-solid surface interface during incubation, and incubation substrate on the attachment/transfer and subsequent biofilm formation by Escherichia coli O157:H7 on beef carcass fabrication surface materials. Materials studied as 2 × 5 cm coupons included stainless steel, acetal, polypropylene, and high-density polyethylene. A 6-strain rifampicin-resistant E. coli O157:H7 composite was used to inoculate (6 log CFU/mL, g, or cm²) tryptic soy broth (TSB), beef fat/lean tissue homogenate (FLH), conveyor belt-runoff fluids, ground beef, or beef fat. Coupons of each material were submerged (4 °C, 30 min) in the inoculated fluids or ground beef, or placed between 2 pieces of inoculated beef fat with pressure (20 kg) applied. Attachment/transfer of the pathogen was surface material and substrate dependent, although beef fat appeared to negate differences among surface materials. Beef fat was the most effective (P < 0.05) inoculation substrate, followed by ground beef, FLH, and TSB. Incubation (15 °C, 16 d) of beef fat-inoculated coupons in a beef fat homogenate (pH 4.21) allowed the pathogen to survive and grow on coupon surfaces, with maximal biofilm formation observed between 2 and 8 d of storage and when air was present at the liquid-solid interface. The results indicated that the process of fabricating beef carcasses may be conducive to the attachment of E. coli O157:H7 onto meat-contact surfaces and subsequent biofilm formation. Furthermore, it is recommended that substrates found in beef fabrication settings, rather than laboratory culture media, be used in studies designed to investigate E. coli O157:H7 biofilm development and control in these environments. Findings of this study provide knowledge on the effect of type of beef carcass fabrication surface material, fabrication-floor fluids and residues, and incubation conditions on attachment/transfer and subsequent biofilm formation by E. coli O157:H7. The results highlight the importance of thoroughly cleaning soiled surfaces to remove all remnants of beef fat or other organic material that may harbor or protect microbial contaminants during otherwise lethal antimicrobial interventions. © 2012 Institute of Food Technologists®
Young, Ian; Wilhelm, Barbara J.; Cahill, Sarah; Nakagawa, Rei; Desmarchelier, Patricia; Rajić, Andrijana
2016-01-01
Pork is one of the major food sources of human salmonellosis worldwide, while beef products have been implicated in numerous foodborne outbreaks. As a result, effective interventions to reduce Salmonella contamination during beef and pork processing are of interest to both regulators and industry. We conducted a rapid systematic review and meta-analysis of literature investigating the efficacy of slaughter and processing interventions to control Salmonella in beef and pork. Review steps included: a comprehensive search strategy; relevance screening of abstracts; relevance confirmation of articles; data extraction; risk-of-bias assessment; meta-analysis (where appropriate); and a weight-of-evidence assessment. A total of 191 relevant experimental studies were identified. Two controlled trials indicated that hot water and steam treatments are effective at reducing the prevalence of Salmonella on beef carcasses (relative risk [RR] = 0.11, 95% confidence interval [CI]: 0.02, 0.58), while four trials found that pre-chill organic acid washes are effective at reducing Salmonella on pork carcasses (RR = 0.32, 95% CI: 0.13, 0.78), with high confidence in the estimates of effect. Four quasi-experimental studies found that post-exsanguination chemical washes were effective to reduce the prevalence of Salmonella on cattle hides, with low confidence in the specific estimate of effect; moderate confidence was found for the effect estimates of scalding (RR = 0.20, 95% CI: 0.14, 0.29) and singeing (RR = 0.34, 95% CI: 0.22, 0.52) of pork carcasses. The overall evidence supported enhanced reductions of Salmonella through a multiple-hurdle approach. In conclusion, various slaughter and processing interventions can contribute to reducing Salmonella on beef and pork carcasses, depending on the context of application; an appropriate combination should be selected, validated, and verified by establishment operators within their local conditions. PMID:28104927
Young, Ian; Wilhelm, Barbara J; Cahill, Sarah; Nakagawa, Rei; Desmarchelier, Patricia; Rajić, Andrijana
2016-12-01
Pork is one of the major food sources of human salmonellosis worldwide, while beef products have been implicated in numerous foodborne outbreaks. As a result, effective interventions to reduce Salmonella contamination during beef and pork processing are of interest to both regulators and industry. We conducted a rapid systematic review and meta-analysis of literature investigating the efficacy of slaughter and processing interventions to control Salmonella in beef and pork. Review steps included: a comprehensive search strategy; relevance screening of abstracts; relevance confirmation of articles; data extraction; risk-of-bias assessment; meta-analysis (where appropriate); and a weight-of-evidence assessment. A total of 191 relevant experimental studies were identified. Two controlled trials indicated that hot water and steam treatments are effective at reducing the prevalence of Salmonella on beef carcasses (relative risk [RR] = 0.11, 95% confidence interval [CI]: 0.02, 0.58), while four trials found that pre-chill organic acid washes are effective at reducing Salmonella on pork carcasses (RR = 0.32, 95% CI: 0.13, 0.78), with high confidence in the estimates of effect. Four quasi-experimental studies found that post-exsanguination chemical washes were effective to reduce the prevalence of Salmonella on cattle hides, with low confidence in the specific estimate of effect; moderate confidence was found for the effect estimates of scalding (RR = 0.20, 95% CI: 0.14, 0.29) and singeing (RR = 0.34, 95% CI: 0.22, 0.52) of pork carcasses. The overall evidence supported enhanced reductions of Salmonella through a multiple-hurdle approach. In conclusion, various slaughter and processing interventions can contribute to reducing Salmonella on beef and pork carcasses, depending on the context of application; an appropriate combination should be selected, validated, and verified by establishment operators within their local conditions.
Kim, Yong Soo; Fukumoto, Glen Kazumi; Kim, Sunae
2012-10-01
The objective of this study was to compare the carcass quality and meat tenderness of Hawaii cattle finished on subtropical pasture with those of mainland US feedlot-finished cattle that were shipped from Hawaii after weaning. Rib-eye steak samples were collected from 30 feedlot-finished cattle harvested at a slaughter house in Washington State, USA and from 13 subtropical pasture-finished cattle harvested at a local slaughter house in Hawaii, then shipped to meat science laboratory at the University of Hawaii, Manoa. Samples were aged for 2 weeks at 4°C and frozen for later proximate analysis and meat tenderness measurement. Feedlot-finished cattle had significantly heavier carcass weight (353 vs 290 kg) and thicker backfat (13.5 vs 6.6 mm), but no significant difference was observed in rib-eye area between the two groups. Marbling score (Small) and United States Department of Agriculture quality grade (Choice) of the pasture-finished beef were not significantly (P < 0.05) different from those of feedlot-finished beef. The shear force value of pasture-finished beef (5.18 kg) was not statistically different (P < 0.05) from that of feedlot-finished beef (4.40 kg). In conclusion, results of this study suggest that Hawaii cattle finished on subtropical pasture produced as tender beef as mainland feedlot-finished cattle with less intramuscular fat.
Arnett, E J; Fluharty, F L; Loerch, S C; Zerby, H N; Zinn, R A; Kuber, P S
2012-03-01
Jersey cattle are known for producing carcasses with a greater amount of marbling, but they require more days on feed to achieve acceptable market weights compared with other breeds. The objective of this study was to evaluate the effect of dietary forage (12 vs. 24% sudangrass:alfalfa hay, DM basis) in steam-flaked, corn-based finishing diets on carcass characteristics, beef palatability, and retail color stability of steaks from Jersey beef compared with conventionally fed commodity beef strip loins (COM) of identified quality (Choice(-) and Select(+)). Jersey steers (n = 77) were blocked by BW and randomly assigned to 1 of the following treatments for a 383-d trial period: Jersey low 12% (JL; n = 38) or Jersey high 24% (JH; n = 39) forage (DM basis). A comparison group was selected from conventionally fed cattle on the same day of slaughter as the Jersey treatments, and strip loins from USDA Select(+) (COM; n = 20) and Choice(-) (COM; n = 20) were removed for data analysis. Seventy-two hours postmortem, strip loins were removed, vacuum-packaged, and aged at 3°C for 18 d postmortem. After the aging period, steaks from the LM were sliced, vacuum-packaged, and frozen (-20°C) until analyzed. Jersey steaks had reduced (P < 0.05) Warner-Bratzler shear force values compared with COM steaks. Trained sensory panelists rated JL greater (P < 0.05) for initial and sustained tenderness and initial juiciness than COM, whereas JH was intermediate. As expected, marbling was greater (P < 0.05) for both JL and JH compared with COM, and trained sensory panel sustained juiciness, beef flavor intensity, and overall acceptability scores were greater (P < 0.05) for both JL and JH compared with COM; however, no differences (P = 0.14) were reported for consumer tenderness and flavor. Objective color (L*, a*, b*) measurements decreased (P < 0.05) over time across treatments. There were no differences among treatments for lightness (L*); however, overall during retail display JL were less (P < 0.05) red (a*) and yellow (b*) than JH and COM. Subjective color scores indicated both JL and JH were less red (P < 0.05) than COM. Steaks from Jersey were equal to and on some measurements more desirable than steaks from COM carcasses for both color stability and palatability. These results suggest that dietary forage level had minimal effects on carcass characteristics and beef palatability. However, feeding a low-forage diet decreases input cost and potentially results in a greater valued carcass. Finishing long-fed (383 d) Jersey steers can meet beef industry expectations with respect to quality grade.
USDA-ARS?s Scientific Manuscript database
Ultrasound carcass measurements are an important tool for preliminary assessment of carcass worth in beef cattle. Breed composition, phenotypic residual feed intake (RFI), temperament, and subclinical paratuberculosis in dams may affect calf ultrasound traits. The objective was to evaluate the assoc...
Nian, Yingqun; Allen, Paul; Harrison, Sabine M; Kerry, Joseph P
2018-02-12
The use of bulls rather than steers for beef production offers some considerable advantages; however, the eating quality of bull beef is an issue of marketing concern. This study assessed the physicochemical characteristics of young Holstein-Friesian (HF) bull and steer beef. Steer carcasses were suspended by the Achilles tendon (AS) and by pelvic suspension (PS). HF steer beef had higher redness, yellowness and chroma values, whereas bulls had higher ultimate pH and darker muscle. Warner-Bratzler shear force, cook loss at different ageing times, moisture, and insoluble and total collagen were higher for HF bull beef, whereas intramuscular fat, soluble collagen and collagen solubility were higher for steer beef. HF steer beef had a higher proportion of saturated fatty acids (SFA) and monounsaturated fatty acids (MUFA), whereas bull beef had higher proportions of polyunsaturated fatty acids (PUFA), PUFA/SFA and n-6/n-3 PUFA ratios. In comparison to AS, PS increased redness and chroma after 24 h blooming; PS improved tenderness up to 7 days of ageing and accelerated the ageing process. For young dairy cattle, steer beef would likely have superior eating quality but a relatively less favourable nutritional fatty acid profile to bull beef. Suspension method affected the tenderness and colour intensity of dairy steer beef at different ageing times. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.
Cannell, R C; Belk, K E; Tatum, J D; Wise, J W; Chapman, P L; Scanga, J A; Smith, G C
2002-05-01
Objective quantification of differences in wholesale cut yields of beef carcasses at plant chain speeds is important for the application of value-based marketing. This study was conducted to evaluate the ability of a commercial video image analysis system, the Computer Vision System (CVS) to 1) predict commercially fabricated beef subprimal yield and 2) augment USDA yield grading, in order to improve accuracy of grade assessment. The CVS was evaluated as a fully installed production system, operating on a full-time basis at chain speeds. Steer and heifer carcasses (n = 296) were evaluated using CVS, as well as by USDA expert and online graders, before the fabrication of carcasses into industry-standard subprimal cuts. Expert yield grade (YG), online YG, CVS estimated carcass yield, and CVS measured ribeye area in conjunction with expert grader estimates of the remaining YG factors (adjusted fat thickness, percentage of kidney-pelvic-heart fat, hot carcass weight) accounted for 67, 39, 64, and 65% of the observed variation in fabricated yields of closely trimmed subprimals. The dual component CVS predicted wholesale cut yields more accurately than current online yield grading, and, in an augmentation system, CVS ribeye measurement replaced estimated ribeye area in determination of USDA yield grade, and the accuracy of cutability prediction was improved, under packing plant conditions and speeds, to a level close to that of expert graders applying grades at a comfortable rate of speed offline.
Cannell, R C; Tatum, J D; Belk, K E; Wise, J W; Clayton, R P; Smith, G C
1999-11-01
An improved ability to quantify differences in the fabrication yields of beef carcasses would facilitate the application of value-based marketing. This study was conducted to evaluate the ability of the Dual-Component Australian VIASCAN to 1) predict fabricated beef subprimal yields as a percentage of carcass weight at each of three fat-trim levels and 2) augment USDA yield grading, thereby improving accuracy of grade placement. Steer and heifer carcasses (n = 240) were evaluated using VIASCAN, as well as by USDA expert and online graders, before fabrication of carcasses to each of three fat-trim levels. Expert yield grade (YG), online YG, VIASCAN estimates, and VIASCAN estimated ribeye area used to augment actual and expert grader estimates of the remaining YG factors (adjusted fat thickness, percentage of kidney-pelvic-heart fat, and hot carcass weight), respectively, 1) accounted for 51, 37, 46, and 55% of the variation in fabricated yields of commodity-trimmed subprimals, 2) accounted for 74, 54, 66, and 75% of the variation in fabricated yields of closely trimmed subprimals, and 3) accounted for 74, 54, 71, and 75% of the variation in fabricated yields of very closely trimmed subprimals. The VIASCAN system predicted fabrication yields more accurately than current online yield grading and, when certain VIASCAN-measured traits were combined with some USDA yield grade factors in an augmentation system, the accuracy of cutability prediction was improved, at packing plant line speeds, to a level matching that of expert graders applying grades at a comfortable rate.
Intensive (pasture) beef cattle operations: the perspective of New Zealand.
Hathaway, S C
1997-08-01
Beef production in New Zealand has characteristics typical of a temperate climate and pasture-based animal husbandry. The specific pathogens which may contaminate fresh beef and which are empirically considered to be of public health importance are similar to those in other countries with temperate climates, i.e. Salmonella, Campylobacter, Escherichia coli O157:H7, Listeria monocytogenes and Toxoplasma gondii. With the exception of T. gondii, it is likely that almost all transmission of these hazards through consumption of beef results from unseen microbial cross-contamination from gastrointestinal sources during slaughter, dressing and further processing. Gaining comprehensive information on carcass contamination levels is an essential first step in establishing food safety objectives for a particular beef production system, and in designing risk-based hazard analysis and critical control point (HACCP) plans. It is likely that the lower mean and maximum numbers of indicator micro-organisms on New Zealand carcasses (when compared with other countries) are in part due to the pre-slaughter cleanliness status of cattle reared under temperate, pasture conditions. Similarly, the failure to detect specific pathogens of gastrointestinal origin in a comprehensive baseline survey most probably reflects the limited pathway for faecal contamination during slaughter and dressing under processing conditions in New Zealand. The New Zealand example provides strong evidence for the need to design HACCP plans according to the specific national (or regional) situation. Reducing all pathways for faecal contamination of products to the maximum extent practicable will be the most important factor in achieving desired food safety objectives for fresh beef. Variable densities of microbial pathogens in gastrointestinal contents are also likely to have a significant effect on subsequent contamination levels of beef carcasses: however, effective controls for limiting the presence of most pathogens of concern in the live animal have yet to be identified.
Prediction of beef carcass and meat traits from rearing factors in young bulls and cull cows.
Soulat, J; Picard, B; Léger, S; Monteils, V
2016-04-01
The aim of this study was to predict the beef carcass and LM (thoracis part) characteristics and the sensory properties of the LM from rearing factors applied during the fattening period. Individual data from 995 animals (688 young bulls and 307 cull cows) in 15 experiments were used to establish prediction models. The data concerned rearing factors (13 variables), carcass characteristics (5 variables), LM characteristics (2 variables), and LM sensory properties (3 variables). In this study, 8 prediction models were established: dressing percentage and the proportions of fat tissue and muscle in the carcass to characterize the beef carcass; cross-sectional area of fibers (mean fiber area) and isocitrate dehydrogenase activity to characterize the LM; and, finally, overall tenderness, juiciness, and flavor intensity scores to characterize the LM sensory properties. A random effect was considered in each model: the breed for the prediction models for the carcass and LM characteristics and the trained taste panel for the prediction of the meat sensory properties. To evaluate the quality of prediction models, 3 criteria were measured: robustness, accuracy, and precision. The model was robust when the root mean square errors of prediction of calibration and validation sub-data sets were near to one another. Except for the mean fiber area model, the obtained predicted models were robust. The prediction models were considered to have a high accuracy when the mean prediction error (MPE) was ≤0.10 and to have a high precision when the was the closest to 1. The prediction of the characteristics of the carcass from the rearing factors had a high precision ( > 0.70) and a high prediction accuracy (MPE < 0.10), except for the fat percentage model ( = 0.67, MPE = 0.16). However, the predictions of the LM characteristics and LM sensory properties from the rearing factors were not sufficiently precise ( < 0.50) and accurate (MPE > 0.10). Only the flavor intensity of the beef score could be satisfactorily predicted from the rearing factors with high precision ( = 0.72) and accuracy (MPE = 0.10). All the prediction models displayed different effects of the rearing factors according to animal categories (young bulls or cull cows). In consequence, these prediction models display the necessary adaption of rearing factors during the fattening period according to animal categories to optimize the carcass traits according to animal categories.
Canadian beef quality audit 1998-99.
Van Donkersgoed, J; Jewison, G; Bygrove, S; Gillis, K; Malchow, D; McLeod, G
2001-02-01
The second beef quality audit was conducted in Canada in 1998-99 to determine the prevalence of quality defects in slaughtered cattle and to monitor changes since the first audit in 1995. Approximately 0.6% of the number of cattle processed annually in Canada were evaluated. Brands were observed on 49% and tag was observed on 43% of the hides. Both brands and tag had increased from 1995. Seventy percent of the cattle were polled and 5% had full horns; thus, the number of horned cattle had decreased from 1995. Bruises were found on 54% of the carcasses, which was a decrease from 78% in 1995. Sixty-eight percent of the bruises were minor, 28% major, and 4% critical in severity. The distribution of bruises on the carcass was 17% on the chuck, 36% on the rib, 30% on the loin, and 16% on the round. Grubs were observed on 0.008% of the carcasses, and surface injection site lesions were observed on 0.2% of the whole carcasses, a decrease from the 1.3% seen in 1995. Seventy-two percent of the livers were passed for human food and 14% for pet food; 14% were condemned. Approximately 64% of the liver losses were due to abscesses. Five percent of the heads and tongues and 0.3% of the whole carcasses were condemned. The hot carcass weight was highly variable in all cattle, averaging 353 kg (s = 43). The average ribeye area was 90 cm2 (s = 13). Both hot carcass weight and ribeye area had increased from 1995. The average grade fat was 9 mm (s = 5), ranging from 0 mm to 48 mm. Lean meat yield averaged 58.8% (s = 4.6). One percent of the carcasses were devoid of marbling, 17% were Canada A, 49% were Canada AA, 32% were Canada AAA, and 1% were Canada Prime, which was an increase in marbling from 1995. Dark cutters were found in 1% of all carcasses; 1% of steers, 0.5% of heifers, 3% of cows, and 14% of bulls. Three percent of the carcasses were underfinished and 13% were overfinished. The number of overfinished carcasses had increased from 1995. Stages, steers with bullish traits, were infrequently observed in 0.5% of the steers, and 0.2% of the steers and 0.3% of the heifers had poor conformation. Yellow fat was not observed in any steers or heifers, but it was found on 65% of the cow carcasses. Only 0.6% of the heifers had an aged carcass, based on skeletal maturity. Based on August 1998 to July 1999 prices, it was estimated that the Canadian beef industry lost $82.62 per head processed, or $274 million annually, from quality nonconformities, which was an increase from 1995. Additional improvements in management, feeding, handling, genetics, marketing, and grading are needed in the beef industry to reduce quality defects.
Canadian beef quality audit 1998-99.
Van Donkersgoed, J; Jewison, G; Bygrove, S; Gillis, K; Malchow, D; McLeod, G
2001-01-01
The second beef quality audit was conducted in Canada in 1998-99 to determine the prevalence of quality defects in slaughtered cattle and to monitor changes since the first audit in 1995. Approximately 0.6% of the number of cattle processed annually in Canada were evaluated. Brands were observed on 49% and tag was observed on 43% of the hides. Both brands and tag had increased from 1995. Seventy percent of the cattle were polled and 5% had full horns; thus, the number of horned cattle had decreased from 1995. Bruises were found on 54% of the carcasses, which was a decrease from 78% in 1995. Sixty-eight percent of the bruises were minor, 28% major, and 4% critical in severity. The distribution of bruises on the carcass was 17% on the chuck, 36% on the rib, 30% on the loin, and 16% on the round. Grubs were observed on 0.008% of the carcasses, and surface injection site lesions were observed on 0.2% of the whole carcasses, a decrease from the 1.3% seen in 1995. Seventy-two percent of the livers were passed for human food and 14% for pet food; 14% were condemned. Approximately 64% of the liver losses were due to abscesses. Five percent of the heads and tongues and 0.3% of the whole carcasses were condemned. The hot carcass weight was highly variable in all cattle, averaging 353 kg (s = 43). The average ribeye area was 90 cm2 (s = 13). Both hot carcass weight and ribeye area had increased from 1995. The average grade fat was 9 mm (s = 5), ranging from 0 mm to 48 mm. Lean meat yield averaged 58.8% (s = 4.6). One percent of the carcasses were devoid of marbling, 17% were Canada A, 49% were Canada AA, 32% were Canada AAA, and 1% were Canada Prime, which was an increase in marbling from 1995. Dark cutters were found in 1% of all carcasses; 1% of steers, 0.5% of heifers, 3% of cows, and 14% of bulls. Three percent of the carcasses were underfinished and 13% were overfinished. The number of overfinished carcasses had increased from 1995. Stages, steers with bullish traits, were infrequently observed in 0.5% of the steers, and 0.2% of the steers and 0.3% of the heifers had poor conformation. Yellow fat was not observed in any steers or heifers, but it was found on 65% of the cow carcasses. Only 0.6% of the heifers had an aged carcass, based on skeletal maturity. Based on August 1998 to July 1999 prices, it was estimated that the Canadian beef industry lost $82.62 per head processed, or $274 million annually, from quality nonconformities, which was an increase from 1995. Additional improvements in management, feeding, handling, genetics, marketing, and grading are needed in the beef industry to reduce quality defects. Images Figure 1. PMID:11272455
Connolly, S M; Cromie, A R; Berry, D P
2016-05-01
The increased demand for animal-derived protein and energy for human consumption will have to be achieved through a combination of improved animal genetic merit and better management strategies. The objective of the present study was to quantify whether differences in genetic merit among animals materialised into phenotypic differences in commercial herds. Carcass phenotypes on 156 864 animals from 7301 finishing herds were used, which included carcass weight (kg), carcass conformation score (scale 1 to 15), carcass fat score (scale 1 to 15) at slaughter as well as carcass price. The price per kilogram and the total carcass value that the producer received for the animal at slaughter was also used. A terminal index, calculated in the national genetic evaluations, was obtained for each animal. The index was based on pedigree index for calving performance, feed intake and carcass traits from the national genetic evaluations. Animals were categorised into four terminal index groups on the basis of genetic merit estimates that were derived before the expression of the phenotypic information by the validation animals. The association between terminal index and phenotypic performance at slaughter was undertaken using mixed models; whether the association differed by gender (i.e. young bulls, steers and heifers) or by early life experiences (animals born in a dairy herd or beef herd) was also investigated. The regression coefficient of phenotypic carcass weight, carcass conformation and carcass fat on their respective estimated breeding values (EBVs) was 0.92 kg, 1.08 units and 0.79 units, respectively, which is close to the expectation of one. Relative to animals in the lowest genetic merit group, animals in the highest genetic merit group had, on average, a 38.7 kg heavier carcass, with 2.21 units greater carcass conformation, and 0.82 units less fat. The superior genetic merit animals were, on average, slaughtered 6 days younger than their inferior genetic merit contemporaries. The superior carcass characteristics of the genetically elite animals materialised in carcasses worth €187 more than those of the lowest genetic merit animals. Although the phenotypic difference in carcass traits of animals divergent in terminal index differed statistically by animal gender and early life experience, the detected interactions were generally biologically small. This study clearly indicates that selection on an appropriate terminal index will produce higher performing animals and this was consistent across all production systems investigated.
Elzo, M A; Johnson, D D; Wasdin, J G; Driver, J D
2012-01-01
Additive genetic Angus-Brahman differences, heterosis effects, and least squares means for six carcass and six meat palatability traits were estimated using data from 1367 steers from the Angus-Brahman multibreed herd of the University of Florida collected from 1989 to 2009. Brahman carcasses had higher dressing percent (P<0.0001), lower marbling (P<0.0001), smaller ribeye area (P<0.0001), and less fat over the ribeye (P<0.0001) than Angus carcasses. Brahman beef was less tender (P<0.0001), had more connective tissue (P<0.0001), and it was less juicy (P<0.001) than Angus beef. Heterosis increased hot carcass weight (P<0.0001), dressing percent (P<0.017), ribeye area (P<0.0001), fat over the ribeye (P<0.0001), and kidney, pelvic, and heart fat (P<0.01) in Angus-Brahman crossbred steers. Results indicated that crossbred animals with up to 50% Brahman showed limited negative impact on meat quality while maximizing meat yield due to heterosis. Copyright © 2011 Elsevier Ltd. All rights reserved.
Miguel, Giulianna Z; Faria, Marcelo H; Roça, Roberto O; Santos, Carolina T; Suman, Surendranath P; Faitarone, Ana B G; Delbem, Nara L C; Girao, Lucio V C; Homem, Juliana M; Barbosa, Erika K; Su, Leticia S; Resende, Flavio D; Siqueira, Gustavo R; Moreira, Aline D; Savian, Taciana V
2014-02-01
The objective was to examine the effects of immunocastration on carcass traits and meat quality of Nellore and Nellore×Aberdeen Angus male animals finished in feedlot. Surgically castrated, immunocastrated, and intact animals were finished in feedlot for 90 days. The animals were harvested, and carcass traits were evaluated. Carcasses were chilled, and one 2.5-cm steak was fabricated from Longissimus thoracis muscle. The steaks were individually vacuum packaged and frozen at -18 °C. Frozen steaks were thawed, and pH, instrumental color, cooking loss, and shear force were determined. Immunocastrated animals demonstrated greater (P<0.05) hot dressing percentage and cold dressing percentage than their surgically castrated counterparts. Furthermore, steaks from immunocastrated and surgically castrated animals exhibited greater redness (P<0.05) and lower darkness (P<0.05) than steaks from intact animals, indicating possible advantage in retailing. The results suggested that immunocastration may be utilized to improve carcass traits and beef color in feedlot-finished Nellore and Nellore×Aberdeen Angus males. © 2013.
Kurve, V P; Joseph, P; Williams, J B; Kim, T J; Boland, H; Smith, T; Schilling, M W
2016-02-01
The objective of this study was to evaluate the effect of feeding native warm season grass (NWSG) to beef cattle during the stocker phase (110days) on carcass and meat quality. Treatments included Bermudagrass (BER), Indiangrass monoculture (IND), and a mixture of NWSG including Big Bluestem, Little Bluestem, and Indiangrass (MIX). Cattle were finished on grain (180days) in a commercial feedlot and carcass data were collected after harvest. The percentages of 'choice' carcasses were 100, 95.8, and 87 within MIX, BER, and IND treatments, respectively. Steaks from BER had greater (P<0.05) fat content, and lower (P<0.05) protein and moisture percentages when compared to steaks from IND and MIX treatments. However, steaks from the MIX and IND treatments had less (P<0.05) lipid oxidation than steaks from BER after 6days of refrigerated storage. Results indicate that NWSG could be effectively incorporated into forage systems for stocker cattle without compromising carcass and meat quality. Copyright © 2015 Elsevier Ltd. All rights reserved.
Boerner, Vinzent; Johnston, David J; Tier, Bruce
2014-10-24
The major obstacles for the implementation of genomic selection in Australian beef cattle are the variety of breeds and in general, small numbers of genotyped and phenotyped individuals per breed. The Australian Beef Cooperative Research Center (Beef CRC) investigated these issues by deriving genomic prediction equations (PE) from a training set of animals that covers a range of breeds and crosses including Angus, Murray Grey, Shorthorn, Hereford, Brahman, Belmont Red, Santa Gertrudis and Tropical Composite. This paper presents accuracies of genomically estimated breeding values (GEBV) that were calculated from these PE in the commercial pure-breed beef cattle seed stock sector. PE derived by the Beef CRC from multi-breed and pure-breed training populations were applied to genotyped Angus, Limousin and Brahman sires and young animals, but with no pure-breed Limousin in the training population. The accuracy of the resulting GEBV was assessed by their genetic correlation to their phenotypic target trait in a bi-variate REML approach that models GEBV as trait observations. Accuracies of most GEBV for Angus and Brahman were between 0.1 and 0.4, with accuracies for abattoir carcass traits generally greater than for live animal body composition traits and reproduction traits. Estimated accuracies greater than 0.5 were only observed for Brahman abattoir carcass traits and for Angus carcass rib fat. Averaged across traits within breeds, accuracies of GEBV were highest when PE from the pooled across-breed training population were used. However, for the Angus and Brahman breeds the difference in accuracy from using pure-breed PE was small. For the Limousin breed no reasonable results could be achieved for any trait. Although accuracies were generally low compared to published accuracies estimated within breeds, they are in line with those derived in other multi-breed populations. Thus PE developed by the Beef CRC can contribute to the implementation of genomic selection in Australian beef cattle breeding.
Microbiology of beef carcasses before and after slaughterline automation.
Whelehan, O. P.; Hudson, W. R.; Roberts, T. A.
1986-01-01
The bacterial status of beef carcasses at a commercial abattoir was monitored before and after slaughterline automation. Bacterial counts did not differ significantly overall (P greater than 0.05) between the original manual line and the automated line for either morning or afternoon slaughter. On the manual line counts in the morning were lower than those from carcasses slaughtered in the afternoon, but on the automated line there was no difference between morning and afternoon counts. Due to highly significant line X sample site interaction for both morning and afternoon counts, overall differences among sample sites were not found by analysis of variance. However, principal components analysis revealed a significant shift in bacterial contamination among some sites due to slaughterline changes. The incidence of Enterobacteriaceae increased marginally following automation. PMID:3701039
USDA-ARS?s Scientific Manuscript database
Background: There is paucity of information regarding the epidemiology of Escherichia coli O157: H7 in developing countries. In this study, we investigated the occurrence of E. coli O157: H7 associated with beef cattle at processing plants and at retail shops in Ethiopia. Methods: Various samples we...
Reid, Rachael; Fanning, Séamus; Whyte, Paul; Kerry, Joe; Bolton, Declan
2017-03-01
Primals were prepared from beef Longissimus thoracis et lumborum (LTL), psoas major (PM), quadriceps femoris (QF) and semitendinosus (S) muscles from cold and hot boned carcasses, vacuum-packaged and stored for 42 or 100days at 2°C and 7°C. Storage temperature, carcass or primal surface temperature, pH and a w were monitored. Samples were taken periodically and tested for total viable count mesophilic (TVCm), TVC psychrophilic (TVCp), total Enterobacteriaceae count (TEC), presumptive Pseudomonas spp., lactic acid bacteria (LAB), Clostridium spp. and Brochothrix thermosphacta. A fifth muscle, biceps femoris (BF), was used to examine the impact of hot boning on blown pack spoilage (BPS). Primal counts increased to 6-7log 10 cfucm -2 after 6weeks. Significantly (P<0.05) higher TEC, Pseudomonas spp. and Br. thermosphacta counts were observed on cold versus hot boned primals. In contrast, significantly (P<0.05) higher TVC, LAB and Clostridium spp. concentrations were obtained on hot boned beef. Moreover, BPS pack distension/bursting occurred considerably sooner in hot boned product. Copyright © 2016 Elsevier Ltd. All rights reserved.
Retzlaff, Deanna; Phebus, Randall; Kastner, Curtis; Marsden, James
2005-01-01
A static chamber steam pasteurization unit (SPS 400-SC()) was installed in a high-volume commercial beef slaughter facility. The SPS 400-SC consists of a three-phase carcass treatment cycle of water removal, steam pasteurization, and water chilling. Seven chamber temperatures (71.1, 73.9, 76.7, 79.4, 82.2, 85.0, and 87.8 degrees C) were evaluated at the midline area of pre-rigor beef carcasses. For each temperature evaluated, 20 carcass sides were randomly selected and aseptically sampled by tissue excision immediately before and after steam pasteurization to determine total aerobic bacteria, Enterobacteriaceae, generic E. coli, and total coliform populations. The 87.8 and 85.0 degrees C treatment temperatures were highly effective at reducing total aerobic bacterial populations, with log(10) reductions of 1.4 and 1.5 CFU/cm(2), respectively, from pretreatment mean population levels of 1.7 and 1.9 log10 CFU/cm(2). These temperatures also reduced Enterobacteriaceae, total coliforms, and generic E. coli to undetectable levels (<0.4 CFU/cm(2)) on all carcasses sampled. Treatment at 82.2 was marginally effective at reducing bacterial populations, while 71.1, 73.9, 76.7, and 79.4 degrees C treatments were ineffective at reducing microbial populations. In a Hazard Analysis Critical Control Points (HACCP)-based system employing steam pasteurization of carcasses as a critical control point, a critical limit of 85.0 degrees C as a minimum chamber temperature should be established, with a targeted operating temperature of 87.8 degrees C providing optimum antimicrobial activity.
West, S E; Harris, K B; Haneklaus, A N; Savell, J W; Thompson, L D; Brooks, J C; Pool, J K; Luna, A M; Engle, T E; Schutz, J S; Woerner, D R; Arcibeque, S L; Belk, K E; Douglass, L; Leheska, J M; McNeill, S; Howe, J C; Holden, J M; Duvall, M; Patterson, K
2014-08-01
This study was designed to provide updated information on the separable components, cooking yields, and proximate composition of retail cuts from the beef chuck. Additionally, the impact the United States Department of Agriculture (USDA) Quality and Yield Grade may have on such factors was investigated. Ultimately, these data will be used in the USDA - Nutrient Data Laboratory's (NDL) National Nutrient Database for Standard Reference (SR). To represent the current United States beef supply, seventy-two carcasses were selected from six regions of the country based on USDA Yield Grade, USDA Quality Grade, gender, and genetic type. Whole beef chuck primals from selected carcasses were shipped to three university laboratories for subsequent retail cut fabrication, raw and cooked cut dissection, and proximate analyses. The incorporation of these data into the SR will improve dietary education, product labeling, and other applications both domestically and abroad, thus emphasizing the importance of accurate and relevant beef nutrient data. Copyright © 2014. Published by Elsevier Ltd.
Xin, Y P; Zan, L S; Wang, Y H; Liu, Y F; Tian, W Q; Fan, Y Y
2011-01-01
The correlations between Y chromosome polymorphisms and the carcass traits were studied in five Chinese beef cattle populations by PCR, single strand conformation polymorphism and Y-STR sequence analysis. Nine alleles and their frequencies were identified on Y-STR UMN0929 region in Qinchuan (n=116), Luxi (n=112), Jinnan (n=104) pure breeds, Simmental×Qinchuan crossbred (n=80) and Angus×Qinchuan crossbred (n=96). The most popular A-176 and B-178 alleles were presented in all 5 cattle populations in the range of 12% (Jinnan) to 66% (Simmental×Qinchuan). The allele I-194 presented Luxi and Angus×Qinchuan. In Qinchun cattle, G-190 and E-186 alleles had bigger effect on BPI (4.23±0.32 and 4.22±0.48 kg/cm, P<0.01) and CW (325.40±49.42 and 316.73±45.29 kg, P<0.01), respectively. In Luxi cattle, I-194 allele affected higher BPI (4.08±0.35 kg/cm, P<0.01) and CW (302.07±17.55 kg, P<0.01), respectively. In Jinnan cattle breed, H-192 had higher BPI (4.32±0.50 kg/cm, P<0.05) and CW (327.87±59.37 kg, P<0.05), respectively. In Simmental×Qinchuan cross breed, C-180 allele affected largely on BPI (5.16±0.25 kg/cm, P<0.05) and CW (393.16±25.92 kg, P<0.05). In Angus×Qinchuan cross breed, I-194 had higher BPI (4.43±0.33 kg, P<0.05) and CW (346.63±29.77 kg, P<0.05). Correlations between alleles and other carcass traits (net meat weight, top grade weight, slaughter rate, net meat rate, loin-eye muscle area, carcass length, meet tenderness and shear force) were also analyzed using mixed-effect model. Cattle Y-STR UMN0929 loci alleles and its correlation with carcass traits in beef cattle populations could be implemented into the cattle breeding program for choosing beef cattle with better carcass traits.
Boykin, C A; Eastwood, L C; Harris, M K; Hale, D S; Kerth, C R; Griffin, D B; Arnold, A N; Hasty, J D; Belk, K E; Woerner, D R; Delmore, R J; Martin, J N; VanOverbeke, D L; Mafi, G G; Pfeiffer, M M; Lawrence, T E; McEvers, T J; Schmidt, T B; Maddock, R J; Johnson, D D; Carr, C C; Scheffler, J M; Pringle, T D; Stelzleni, A M; Gottlieb, J; Savell, J W
2017-07-01
The National Beef Quality Audit (NBQA)-2016 used in-plant cooler assessments to benchmark the current status of the fed steer and heifer beef industry in the United States. In-plant cooler assessments ( = 9,106 carcasses) were conducted at 30 facilities, where approximately 10% of a single day's production were evaluated for USDA quality grade (QG) and yield grade (YG) factors. Frequencies of evaluated traits were 66.5% steer and 33.4% heifer sex classes and 82.9% native, 15.9% dairy-type, and 1.2% estimated breed types. Mean USDA YG factors were 1.42 cm for adjusted fat thickness, 89.5 cm for LM area, 390.3 kg for HCW, and 1.9% for KPH. Mean USDA YG was 3.1, with a frequency distribution of 9.6% YG 1, 36.7% YG 2, 39.2% YG 3, 12.0% YG 4, and 2.5% YG 5. Mean USDA QG traits were Small for marbling score, A for overall maturity, A55 for lean maturity, and A for skeletal maturity. Mean USDA QG was Select with a frequency distribution of QG of 3.8% Prime, 67.3% Choice, 23.2% Select, and 5.6% lower score. Lower score included dark cutter (1.9%), blood splash (0.1%), and hard bone, which are USDA overall maturity scores of C or older (1.8%). Marbling score distributions were 0.85% Slightly Abundant or greater, 7.63% Moderate, 23.54% Modest, 39.63% Small, 23.62% Slight, and 0.83% Traces or less. Carcasses that were Choice or Select and USDA YG 2 or 3 accounted for 70.7% of the carcasses evaluated. Compared with the previous NBQA, we found a numerical increase in mean USDA YG, USDA QG, adjusted fat thickness, HCW, LM area, and marbling score with an increase in dairy-type carcasses and percentage of carcasses grading USDA Prime and Choice as well as frequency of USDA YG 4 and 5. The findings from this study will be used by all segments of the industry to understand and improve the quality of fed steer and heifer beef that is being produced.
MEAT SCIENCE AND MUSCLE BIOLOGY SYMPOSIUM--implant and beta agonist impacts on beef palatability.
Garmyn, A J; Miller, M F
2014-01-01
The use of anabolic implants has a long-standing place in the cattle feeding industry, due to their positive impact on growth performance and subsequent profitability. However, implants can have adverse effects on carcass quality, shear force, and eating quality depending on the dose and frequency, or what some refer to as the aggressiveness of the implant regimen administered. Within the past decade, a new class of growth promotants, known as β-adrenergic agonists (βAA), has emerged in the beef feeding industry in the United States. Currently, 2 have gained U.S. Food and Drug Administration approval for use in beef finishing diets to improve performance and carcass yields. Much like anabolic implants, these repartitioning agents can have negative effects on Warner-Bratzler shear force (WBSF), but the differences do not necessarily translate directly to consumer responses for palatability and acceptance in some instances, especially when tenderness is managed through proper postmortem aging. As researchers continued to investigate the mechanisms responsible for the impact of βAA, inevitably this led to consideration of the interaction between βAA and anabolic implants. Early work combining zilpaterol hydrochloride (ZH) with anabolic implants improved performance, carcass yield, and meat yield with additive negative effects on WBSF. Similar results were produced when pairing ZH with anabolic steroids equipped with various release patterns. As with any tool, the key to success is proper management. Certain cattle populations may be better suited to receive growth promotants such as implants and βAA, and postmortem management of subprimal cuts becomes vital when producers take more aggressive approaches to improve performance and yield. The objective of this review is to overview research findings related to the impact of growth promotant technologies on beef palatability, focusing specifically on the role of implants and βAA on carcass quality, beef tenderness, and consumer responses for meat palatability.
Del Bianco Benedeti, Pedro; Paulino, Pedro Veiga Rodrigues; Marcondes, Marcos Inácio; Maciel, Ivan França Smith; da Silva, Matheus Custódio; Faciola, Antonio Pinheiro
2016-01-01
The objective of this study was to evaluate the effects of replacing dry ground corn with crude glycerol on intake, apparent digestibility, performance, and carcass characteristics of finishing beef bulls. A completely randomized block design experiment with 25 d for adaptation and 100 d for data collection was conducted, in which 3,640 Nellore bulls (367 ± 36.8 kg; 18 ± 3 mo) were blocked by body weight and assigned to 20 pens. Bulls were randomly assigned to one of four treatments: 0, 5, 10, and 15% (dry matter basis) of crude glycerol in the diet. Initially, 20 bulls were slaughtered to serve as a reference to estimate initial empty body weight, which allowed for carcass gain calculation. Bulls were weighed at the beginning, at two-thirds, and at the end of the experiment for performance calculations. Carcass measurements were obtained by ultrasound. Fecal output was estimated using indigestible neutral detergent fiber as an internal marker. Data were analyzed using the mixed procedures in SAS 9.2 (SAS Institute Inc., Cary, NC). Intake of dry matter, organic matter, and neutral detergent fiber decreased linearly (P < 0.05) with crude glycerol inclusion. However, crude glycerol levels did not affect (P > 0.05) intakes of crude protein, non-fiber carbohydrates, and total digestible nutrients. Digestibility of dry matter, organic matter, neutral detergent fiber, and total digestible nutrients increased quadratically (P < 0.05) with the inclusion of crude glycerol in the diet. Crude glycerol inclusion did not change the intake of digestible dry matter, average daily gain, final body weight, carcass gain, carcass dressing, gain-to-feed ratio, Longissimus thoracis muscle area, and back and rump fat thicknesses (P > 0.05). These results suggest that crude glycerol may be included in finishing beef diets at levels up to 15% without impairing performance and carcass characteristics. PMID:26820725
Evaluation of methods of temperament scoring for beef cattle
USDA-ARS?s Scientific Manuscript database
Temperament can negatively affect various production traits, including live weight, ADG, DMI, conception rates and carcass weight. The objective of this research study was to evaluate temperament scoring methods in beef cattle. Crossbred (n = 228) calves were evaluated for temperament at weaning by ...
Guyon, R; Dorey, F; Malas, J P; Leclercq, A
2001-09-01
To identify hazard points and critical points during beef slaughtering, which is a necessary first step toward developing a hazard analysis and critical control point system to control meat contamination by Escherichia coli O157:H7, samples (n = 192) from surfaces, work tops, worker's hands, and beef carcasses were collected from a slaughterhouse in Calvados, France. Five strains of E. coli O157:H7 were isolated from a footbridge and a worker's apron at the preevisceration post and from a worker's hand at the defatting post. Three isolates carried stx2c, eae, and EHEC-hlyA genes and showed similar molecular types by random amplified polymorphic DNA, polymerase chain reaction IS3, and XbaI pulsed-field gel electrophoresis. Thus, this study has shown that preevisceration and defatting post and associated worker's materials are critical points for carcasses contamination by E. coli O157:H7 during beef slaughtering.
Kerth, Chris R; Harbison, Amanda L; Smith, Stephen B; Miller, Rhonda K
2015-06-01
Brisket, chuck, plate, flank, and round subcutaneous fat trim were used to produce ground beef patties then evaluated for color, lipid oxidation, fatty acid composition, volatile chemical compounds and consumer sensory evaluation. Color, TBARS, consumer sensory evaluation, and cook/freezer loss did not differ (P>0.05) among carcass fat locations. Percentage stearic acid was lower (P=0.044) in the ground beef using brisket fat than using the chuck and flank fat. Patties made with brisket fat were higher in cis-vaccenic acid (P=0.016) and the saturated to monounsaturated fatty acid ratio (P=0.018) than all other sources of subcutaneous fat. Butanedione was highest (P=0.013) in patties using flank and plate fat. Ground beef with brisket fat was higher (P=0.003) than all other sources for beefy aroma. Altering the profile of non-polar, triglyceride fatty acids has no effect on sensory flavor or major volatile chemical compounds. Copyright © 2015 Elsevier Ltd. All rights reserved.
Bass, P D; Scanga, J A; Chapman, P L; Smith, G C; Tatum, J D; Belk, K E
2008-07-01
Effects of the dark-cutting condition were examined on commercially slaughtered beef carcass sides that were classified into groups exhibiting 1/3, 1/2, and full degrees of the dark-cutting (DEGDC) condition, as evaluated by a USDA-Agricultural Marketing Service grader (n = 20 per group). Twenty-nine muscles of each carcass side were evaluated to determine the ultimate pH and color (L*, a*, and b*). Fourteen beef muscles (biceps femoris, deep pectoral, chuck complexus, gluteus medius, infraspinatus, latissimus dorsi, psoas major, longissimus thoracis, longissimus lumborum, semimembranosus, semitendinosus, triceps brachii long head, tensor fasciae latae, and vastus lateralis) were evaluated using Warner-Bratzler Shear force (WBSF) and a trained sensory panel. The muscle x DEGDC interaction was significant for ultimate pH, L*, a*, and b* values (P < 0.05). When ultimate pH values of individual muscles were compared with the same muscles evaluated in a previous study, the 1/3, 1/2, and full DEGDC had 7, 9, and 5 muscles, respectively, that fell within a computed 95% prediction limit of what would be considered as a normal pH but were more variable as measured by within-class CV. Color values (L*, a*, and b*) of the muscles from dark-cutting carcasses were numerically lower than those from the normal carcasses. A survey designed to determine the ideal color range of beef lean for retail meat merchandisers (n = 34) and food service chefs (n = 33) across the United States resulted in data analyzed using principal components analysis of L*, a*, and b* values for muscles dissected in the study to estimate the true values for dark-cutting carcasses. Muscles that were within an acceptable color value range for food service chefs had the potential to add between $42.29 to $26.44 and $14.71 to $8.11 per side when valued at Choice and Select prices, respectively. Muscles that were within an acceptable color value range had the potential to add between $30.39 to $16.74 and $10.37 to $5.03 per side for retail meat merchandisers when acceptable muscles were valued at Choice and Select prices, respectively. No muscle x DEGDC interactions were detected for WBSF and sensory panel scores (P > 0.05), but differences were detected among muscles (P < 0.05). Several muscles were considered salvageable from the dark-cutting carcasses that were evaluated, and no significant differences in sensory scores or WBSF between DEGDC classes suggested equal sensory expectations for muscles from dark-cutting carcasses.
Barkocy-Gallagher, Genevieve A; Arthur, Terrance M; Rivera-Betancourt, Mildred; Nou, Xiangwu; Shackelford, Steven D; Wheeler, Tommy L; Koohmaraie, Mohammad
2003-11-01
The seasonal prevalence of Escherichia coli O157:H7, Salmonella, non-O157 E. coli (STEC), and stx-harboring cells was monitored at three Midwestern fed-beef processing plants. Overall, E. coli O157:H7 was recovered from 5.9% of fecal samples, 60.6% of hide samples, and 26.7% of carcasses sampled before the preevisceration wash. This pathogen also was recovered from 1.2% (15 of 1,232) of carcasses sampled at chilling (postintervention) at approximate levels of <3.0 cells per 100 cm2. In one case, the E. coli O157:H7 concentration dropped from ca. 1,100 cells per 320 cm2 at the preevisceration stage to a level that was undetectable on ca. 2,500 cm2 at the postintervention stage. The prevalence of E. coli O157:H7 in feces peaked in the summer, whereas its prevalence on hide was high from the spring through the fall. Overall, Salmonella was recovered from 4.4, 71.0, and 12.7% of fecal, hide, and preevisceration carcass samples, respectively. Salmonella was recovered from one postintervention carcass (of 1,016 sampled). Salmonella prevalence peaked in feces in the summer and was highest on hide and preevisceration carcasses in the summer and the fall. Non-O157 STEC prevalence also appeared to vary by season, but the efficiency in the recovery of isolates from stx-positive samples ranged from 37.5 to 83.8% and could have influenced these results. Cells harboring stx genes were detected by PCR in 34.3, 92.0, 96.6, and 16.2% of fecal, hide, preevisceration carcass, and postintervention carcass samples, respectively. The approximate level of non-O157 STEC and stx-harboring cells on postintervention carcasses was > or = 3.0 cells per 100 cm2 for only 8 of 199 carcasses (4.0%). Overall, the prevalence of E. coli O157:H7, Salmonella, and non-O157 STEC varied by season, was higher on hides than in feces, and decreased dramatically, along with pathogen levels, during processing and during the application of antimicrobial interventions. These results demonstrate the effectiveness of the current interventions used by the industry and highlight the significance of hides as a major source of pathogens on beef carcasses.
Chinen, Isabel; Epszteyn, Sergio; Melamed, Celia L; Aguerre, Lorena; Martínez Espinosa, Estela; Motter, Mariana M; Baschkier, Ariela; Manfredi, Eduardo; Miliwebsky, Elizabeth; Rivas, Marta
2009-06-30
We describe the isolation and characterization of Shiga toxin (Stx)-producing Escherichia coli (STEC) O157:H7 from cooked and uncooked beef and chicken burgers and from chicken carcasses collected during sampling procedures in 2001 and 2002 in Buenos Aires City, Argentina. Of the 24 STEC O157:H7 strains isolated, 20 were recovered from 19 (6.8%) out of 279 samples of beef and chicken burgers, and 4 strains from 4 (10.3%) out of 39 chicken carcasses. The samples were analyzed following the USDA/FSIS 2002 method. The prevalent stx genotype was stx(2) and stx(2c) (12 strains, 50%). All strains were characterized as eae and ehxA-positive. By XbaI-PFGE, the strains yielded 10 different patterns. Eighteen out of 24 strains were grouped in four clusters: #1 (4 strains, AREXHX01.0043), #2 (4 strains, AREXHX01.0022), #3 (8 strains, AREXHX01.0139), and #4 (2 strains, AREXHX01.0200). Identical strains by phage typing, stx genotyping and PFGE were detected in uncooked and cooked beef and chicken burgers in different restaurants, which had been collected on the same or different sampling dates. These findings help to underline the importance of STEC O157 detection in meat products, to improve active surveillance, and to define control strategies in order to prevent new cases of STEC infection.
Effects of functional polymorphisms on beef carcass merit
USDA-ARS?s Scientific Manuscript database
To develop a resource to identify polymorphisms present in common beef cattle breeds, and relate those polymorphisms to phenotypic differences, low-coverage genomic sequence was obtained on 186 purebred bulls from 15 predominant breeds in the United States, and 84 crossbred sons of these bulls. The...
Coleman, Lucy W; Hickson, Rebecca E; Schreurs, Nicola M; Martin, Natalia P; Kenyon, Paul R; Lopez-Villalobos, Nicolas; Morris, Stephen T
2016-11-01
Steers from Angus, Angus×Holstein Friesian, Angus×Holstein Friesian-Jersey and Angus×Jersey cows and a Hereford sire were measured for their carcass and meat quality characteristics. Steers from the Angus×Holstein Friesian cows had a greater final body weight and carcass weight (P<0.05). Steers from Angus×Jersey cows had the lowest carcass weight and dressing-out percentage (P<0.05). There was a greater fat depth over the rump at 12 and 18months of age for the steers from Angus cows (P<0.05) but, not at 24months of age. The steers had similar meat quality characteristics across the breed groups. Steers from Angus×Holstein Friesian and Angus×Jersey cows had a higher ratio of n6 to n3 fatty acids. Using beef-cross-dairy cows to produce steers for meat production does not impact on meat quality. Using Jersey in the breed cross reduced the carcass tissues in the live weight and the potential meat yield. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.
Tracing Surrogates for Enteric Pathogens Inoculated on Hide through the Beef Harvesting Process.
Villarreal-Silva, Mariana; Genho, Daniel P; Ilhak, Irfan; Lucia, Lisa M; Dickson, James S; Gehring, Kerri B; Savell, Jeffrey W; Castillo, Alejandro
2016-11-01
Multiple antimicrobial interventions have been validated for use during the beef postharvesting process. However, little has been done to determine the impact of the postharvest environment on pathogen contamination. In this study, surrogate microorganisms were used to simulate pathogen cross-contamination through the postharvest environment at three different abattoirs. At each abattoir, the brisket areas of 13 hide-on carcasses were inoculated after stunning, with a gelatin slurry containing a cocktail (~7 log CFU/ml) of fluorescent Escherichia coli biotype I. These microorganisms are approved as surrogates for E. coli O157:H7 and Salmonella . From these carcasses, samples (300 cm 2 ) were taken at different stages during the harvesting process: after hide opening, prior to evisceration, after evisceration, after splitting, and after final intervention. The carcass (noninoculated) immediately following (adjacent to) each hide-inoculated carcass was also tested to determine cross-contamination. Environmental (floor, walls, air) and personal garment (gloves, boots, aprons) samples were collected. Other sampled equipment included knives, meat hooks, hide pullers, and splitting saws. Results demonstrated that cross-contamination occurred between the inoculated hide and the carcass and also by transfer of microorganisms to the adjacent, noninoculated carcasses. Microbial transfer also occurred from hides or carcasses to the environment, personal garments, and equipment. Counts of the surrogate bacteria used were higher in equipment samples (15%) than in environment samples (10%). Personal garments had the lowest occurrence of cross-contamination (7%). For all abattoirs, surrogates were undetected on the carcass (<1.4 log CFU/300cm 2 ) after the final intervention stage. This study confirms the importance of following adequate procedures for carcass dressing and highlights an adequate hide opening procedure as a crucial step to prevent carcass contamination.
NASA Technical Reports Server (NTRS)
Gammell, P. M.
1981-01-01
Reflections in ultrasonic A-scan signatures of beef carcasses indicate USDA grade. Since reflections from within muscle are determined primarily by fat/muscle interface, richness of signals is direct indication of degree of marbling and quality. Method replaces subjective sight and feel tests by individual graders and is applicable to grade analysis of live cattle.
Effect of two Spanish breeds and diet on beef quality including consumer preferences.
Ripoll, Guillermo; Blanco, Mireia; Albertí, Pere; Panea, Begoña; Joy, Margalida; Casasús, Isabel
2014-03-30
Farmers in dry mountain areas are changing their management strategies to improve livestock farming efficiency, by using different forages or different breeds. The effect of breed (Parda de Montaña vs. Pirenaica) and finishing diet (grazing on meadows vs. a total mixed ration (50% alfalfa, 40% maize grain, 10% straw)) on carcass characteristics and meat quality of steers was studied. Parda de Montaña had a greater (P < 0.01) amount of intramuscular fat than Pirenaica. The finishing diet did not influence carcass fat color, but fatty acid composition was slightly affected. Finishing steers on a total mixed ration increased the percentage of fat of the 10th rib (P < 0.001). Supplementation with concentrates increased the diet energy concentration and also increased the dressing percentage. Both breeds had similar carcass characteristics. Consumers preferred beef from the Pirenaica breed because of its greater tenderness. Consumers did not differentiate between beef from animals fed different finishing diets. However, consumers who like meat very much preferred meat aged in a cooler at 4 °C for 15 days rather than 8 days. © 2013 Society of Chemical Industry.
Slaughtering age effect on carcass traits and meat quality of italian heavy draught horse foals.
De Palo, P; Maggiolino, A; Centoducati, P; Tateo, A
2013-11-01
The present work describes the effect of slaughtering age on horse carcass traits and on meat quality. Eighteen male Italian heavy draught horse (IHDH) breed foals were employed in the study. Soon after foaling they were randomly subdivided in 3 groups according to 3 age at slaughtering classes: 6 months old, 11 months old and 18 months old. Live weight, hot carcass weight and dressing percentage of each animal were recorded. After slaughtering, meat samples were collected from Longissimus Dorsi muscle between 13th and 18th thoracic vertebra of each animal and then analyzed. The right half carcass of each animal was then divided in cuts. Each one was subdivided into lean, fat and bones. Then, the classification of the lean meat in first and second quality cuts was performed according to the butchers' customs. Older animals were characterized by a lower incidence of first quality cuts (p<0.01) on carcass. Younger animals showed greater content in protein (p<0.01). Fatty acid profile showed an increasing trend of PUFA connected to the increasing of slaughtering age (p<0.05). The unsaturation index of intramuscular fatty acids was not affected by slaughtering age, confirming that horse meat, if compared to beef, is more suitable from a nutritional point of view. Season influenced reproduction, birth as well as production aspects of this species. The different slaughtering age could represent the way to produce meat of IHDH foals during the entire year without change in the qualitative standard expected by consumers.
Slaughtering Age Effect on Carcass Traits and Meat Quality of Italian Heavy Draught Horse Foals
De Palo, P.; Maggiolino, A.; Centoducati, P.; Tateo, A.
2013-01-01
The present work describes the effect of slaughtering age on horse carcass traits and on meat quality. Eighteen male Italian heavy draught horse (IHDH) breed foals were employed in the study. Soon after foaling they were randomly subdivided in 3 groups according to 3 age at slaughtering classes: 6 months old, 11 months old and 18 months old. Live weight, hot carcass weight and dressing percentage of each animal were recorded. After slaughtering, meat samples were collected from Longissimus Dorsi muscle between 13th and 18th thoracic vertebra of each animal and then analyzed. The right half carcass of each animal was then divided in cuts. Each one was subdivided into lean, fat and bones. Then, the classification of the lean meat in first and second quality cuts was performed according to the butchers’ customs. Older animals were characterized by a lower incidence of first quality cuts (p<0.01) on carcass. Younger animals showed greater content in protein (p<0.01). Fatty acid profile showed an increasing trend of PUFA connected to the increasing of slaughtering age (p<0.05). The unsaturation index of intramuscular fatty acids was not affected by slaughtering age, confirming that horse meat, if compared to beef, is more suitable from a nutritional point of view. Season influenced reproduction, birth as well as production aspects of this species. The different slaughtering age could represent the way to produce meat of IHDH foals during the entire year without change in the qualitative standard expected by consumers. PMID:25049752
USDA-ARS?s Scientific Manuscript database
The objective of this 2-yr study was to evaluate growing and finishing performance, as well as carcass characteristics of spring-born steers backgrounded on 3 different systems, using feedstuffs readily available in the Midwest: 1) grazing corn residue and being supplemented with dried distillers pl...
USDA-ARS?s Scientific Manuscript database
Washing and sanitizing agents have been effective in reducing bacterial populations and pathogen presence on carcasses. Thermal interventions consistently provide the greatest pathogen reductions and can be applied during slaughter in a number of different forms, either as a whole carcass wash, or t...
USDA-ARS?s Scientific Manuscript database
We previously have shown that plasma concentrations of endocannabinoids (EC) are positively correlated with feed efficiency and leaner carcasses in finishing steers. However, whether the animal growth during the finishing period affects the concentration of EC is unknown. The objective of this study...
Magolski, J D; Buchanan, D S; Maddock-Carlin, K R; Anderson, V L; Newman, D J; Berg, E P
2013-11-01
Warner-Bratzler shear force values from 560 mixed breed heifers and steers were used to determine estimates of genetic selection. Cattle were marketed from 2008 to 2011, and included five feedlot based research projects at the North Dakota State University-Carrington Research Extension Center. Samples were collected for IGENITY® analysis providing information that included selection indices and estimated breeding values for carcass traits. DNA-based test results were compared with actual carcass measurements. Marbling accounted for over 10% of the variation in WBSF while hot carcass weight was the second most influential carcass trait accounting for 4% (P<0.01). Regression coefficients of IGENITY® molecular breeding value on phenotype for WBSF, marbling, ribeye area, yield grade, and fat thickness were low (R(2)=0.14, 0.02, 0.03, 0.03, and 0.02, respectively). Therefore selecting cattle for a higher degree of marbling and feeding a diet that meets or exceeds recommended nutrients for growth are the most important factors influencing beef tenderness and acceptability. Copyright © 2013 Elsevier Ltd. All rights reserved.
Use of hot water for beef carcass decontamination.
Castillo, A; Lucia, L M; Goodson, K J; Savell, J W; Acuff, G R
1998-01-01
Hot water treatment of beef carcass surfaces for reduction of Escherichia coli O157:H7, Salmonella typhimurium, and various indicator organisms was studied using a model carcass spray cabinet. Paired hot carcass surface regions with different external fat characteristics (inside round, outside round, brisket, flank, and clod) were removed from carcasses immediately after the slaughter and dressing process. All cuts were inoculated with bovine feces containing 10(6)/g each of rifampicin-resistant E. coli O157:H7 and S. typhimurium, or with uninoculated bovine feces. Surfaces then were exposed to a carcass water wash or a water wash followed by hot water spray (95 degrees C). Counts of rifampicin-resistant Salmonella and E. coli or aerobic plate count (APC) and coliform counts were conducted before and after each treatment. All treatments significantly reduced levels of pathogens from the initial inoculation level of 5.0 log(10) CFU/cm2. Treatments including hot water sprays provided mean reductions of initial counts for E. coli O157:H7 and S. typhimurium of 3.7 and 3.8 log, APC reductions of 2.9 log, and coliform and thermotolerant coliform count reductions of 3.3 log. The efficacy of hot water treatments was affected by the carcass surface region, but not by delaying the treatment (30 min) after contaminating the surface. Verification of efficacy of hot water interventions used as critical control points in a hazard analysis critical control point (HACCP) system may be possible using coliform counts.
USDA-ARS?s Scientific Manuscript database
Our objectives were to evaluate the dose/payout pattern of trenbolone acetate (TBA) and estradiol-17b (E2) implants and feeding of zilpaterol hydrochloride (ZH) on performance and carcass characteristics of finishing beef steers. A randomized complete block design was used with a 3 × 2 factorial arr...
USDA-ARS?s Scientific Manuscript database
Objectives: The objectives of this project were to 1) evaluate meat quality characteristics, and 2) identify consumer palatability and label preferences for beef produced with varied levels of technology to facilitate production and marketing decisions and enhance consumer knowledge and trust in bee...
USDA-ARS?s Scientific Manuscript database
Several organizations have developed prediction models for molecular breeding values (MBV) for quantitative growth and carcass traits in beef cattle using BovineSNP50 genotypes and phenotypic or EBV data. MBV for Angus cattle have been developed by IGENITY, Pfizer Animal Genetics, and a collaboratio...
Utama, D T; Lee, S G; Baek, K H; Chung, W S; Chung, I A; Kim, D I; Kim, G Y; Lee, S K
2018-02-01
Holstein-Friesian steer beef production is renowned globally as a secondary product of the milk industry. Grass feeding is a common practice in raising Holstein steers because of its low cost. Furthermore, grass feeding is an alternative way to produce beef with a balanced n-6 to n-3 fatty acids (FAs) ratio. However, the performance and meat quality of Holstein-Friesian cattle is more likely to depend on a high-quality diet. The aim of this study was to observe whether feeding two mixed diets; a corn-based total mixed ration (TMR) with winter ryegrass (Lolium perenne) or flaxseed oil-supplemented pellets with reed canary grass haylage (n-3 mix) provided benefits on carcass weight, meat quality and FA composition compared with cattle fed with reed canary grass (Phalaris arundinacea) haylage alone. In all, 15 21-month-old Holstein-Friesian steers were randomly assigned to three group pens, were allowed free access to water and were fed different experimental diets for 150 days. Blood samples were taken a week before slaughter. Carcass weight and meat quality were evaluated after slaughter. Plasma lipid levels and aspartate aminotransferase (AST), γ-glutamyl transpeptidase (GGT), creatine kinase (CK) and alkaline phosphatase (ALP) activities were determined. Diet did not affect plasma triglyceride levels and GGT activity. Plasma cholesterol levels, including low-density and high-density lipoproteins, were higher in both mixed-diet groups than in the haylae group. The highest activities of plasma AST, CK and ALP were observed in the haylage group, followed by n-3 mix and TMR groups, respectively. Carcass weight was lower in the haylage group than in the other groups and no differences were found between the TMR and n-3 mix groups. Although the n-3 mix-fed and haylage-fed beef provided lower n-6 to n-3 FAs ratio than TMR-fed beef, the roasted beef obtained from the TMR group was more acceptable with better overall meat physicochemical properties and sensory scores. According to daily cost, carcass weight and n-6 to n-3 FAs ratio, the finishing diet containing flaxseed oil-supplemented pellets and reed canary grass haylage at the as-fed ratio of 40 : 60 could be beneficial for the production of n-3-enriched beef.
Relationship between cattle temperament as determined by exit velocity carcass merit in beef cattle
USDA-ARS?s Scientific Manuscript database
The objective of this trial was to use cattle temperament, as determined by exit velocity only, as a means to evaluate the impact of temperament on carcass merit and the possible utilization of exit velocity alone as a sorting tool within the feedlot. At the time of processing, exit velocity and bod...
Effect of backgrounding system on feedlot performance and carcass characteristics of beef steers
USDA-ARS?s Scientific Manuscript database
The objective of this study was to evaluate feedlot performance and carcass characteristics of steers that were backgrounded using 1 of 3 treatments: 1) corn residue grazing supplemented 6 days a week with 2.77 kg DM/hd of distillers (CRD), 2) oat-brassica forage grazing (OBF) or 3) drylotting on a ...
USDA-ARS?s Scientific Manuscript database
Studies were conducted to evaluate the effect of weaning of steer calves on BW gain, feedlot performance, and carcass characteristics in two herds located in the Northern Great Plains, USA. Steer calves from predominantly Angus × Hereford dams were stratified within dam age and calving date (Fort K...
Salmonella in beef and produce from honduras.
Maradiaga, Martha; Miller, Mark F; Thompson, Leslie; Pond, Ansen; Gragg, Sara E; Echeverry, Alejandro; Garcia, Lyda G; Loneragan, Guy H; Brashears, Mindy M
2015-03-01
Salmonella continues to cause a considerable number of foodborne illnesses worldwide. The sources of outbreaks include contaminated meat and produce. The purpose of this study was to establish an initial investigation of the burden of Salmonella in produce and beef from Honduras by sampling retail markets and abattoirs. Retail produce samples (cantaloupes, cilantro, cucumbers, leafy greens, peppers, and tomatoes; n = 573) were purchased in three major cities of Honduras, and retail whole-muscle beef (n = 555) samples were also purchased in four major cities. Additionally, both hide and beef carcass (n = 141) samples were collected from two Honduran abattoirs. Whole-muscle beef samples were obtained using a sponge hydrated with buffered peptone water, and 10 ml of the buffered peptone water rinsate of each produce sample was collected with a dry sponge and placed in a bag to be transported back to the United States. Salmonella was detected using a commercially available, closeplatform PCR system, and positive samples were subjected to culture on selective media to obtain isolates. Overall, the prevalence of Salmonella-positive samples, based on PCR detection in Honduras (n = 555) retail beef was 10.1% (95% confidence interval = 7.8, 12.9), whereas 7.8% (n = 141) of beef carcass and hides samples were positive in both beef plants. The overall Salmonella prevalence for all produce samples (n = 573) collected was 2.1% (95% confidence interval = 1.2, 3.6). The most common serotypes identified in Honduras were Salmonella Typhimurium followed by Derby. These results provide an indication of Salmonella contamination of beef and produce in Honduras. Developing a Salmonella baseline for Latin America through an initial investigation like the one presented here contributes to a broader global understanding of the potential exposure through food, thus providing insight into the needs for control strategies.
Nutrient analysis of the Beef Alternative Merchandising cuts.
Desimone, T L; Acheson, R A; Woerner, D R; Engle, T E; Douglass, L W; Belk, K E
2013-03-01
The objective of this study was to generate raw and cooked nutrient composition data to identify Quality Grade differences in proximate values for eight Beef Alternative Merchandising (BAM) cuts. The data generated will be used to update the nutrient data in the USDA National Nutrient Database for Standard Reference (SR). Beef Rib, Oven-Prepared, Beef Loin, Strip Loin, and Beef Loin, Top Sirloin Butt subprimals were collected from a total of 24 carcasses from four packing plants. The carcasses were a combination of USDA Yield Grades 2 (n=12) and 3 (n=12), USDA Quality Grades upper two-thirds Choice (n=8), low Choice (n=8), and Select (n=8), and two genders, steer (n=16) and heifer (n=8). After aging, subprimals were fabricated into the BAM cuts, dissected, and nutrient analysis was performed. Sample homogenates from each animal were homogenized and composited for analysis of the following: proximate analysis, long chain and trans-fatty acids, conjugated linoleic acid, total cholesterol, vitamin B-12, and selenium. This study identified seven BAM cuts from all three Quality Grades that qualify for USDA Lean; seven Select cuts that qualify for USDA Extra Lean; and three Select cuts that qualify for the American Heart Association's Heart Healthy Check. Copyright © 2012 Elsevier Ltd. All rights reserved.
Chen, Chih-Ming; Ke, Se-Chin; Li, Chia-Ru; Wu, Ying-Chen; Chen, Ter-Hsin; Lai, Chih-Ho; Wu, Xin-Xia; Wu, Lii-Tzu
2017-10-01
Multidrug-resistant Escherichia coli can contaminate food meat during processing and cause human infection. Phenotypic and genotypic characterization of the antimicrobial resistance were conducted for 45 multidrug-resistant E. coli isolates from 208 samples of beef carcasses. The mechanisms of resistance were evaluated using polymerase chain reaction and sequencing methods, and the clonal relationship among isolates was evaluated using multilocus sequence typing (MLST) and pulsed-field gel electrophoresis (PFGE). Different variants of bla, tet, flo, dfrA, and aadA genes were detected in most of the strains resistant to β-lactam, tetracycline, chloramphenicol, sulfonamides, and aminoglycosides, respectively. Extended-spectrum β-lactamase (ESBL)-producing E. coli was found in 42.2% of the 45 E. coli isolates and the most commonly detected ESBL genotypes were CTX-M group 1 and 9. Class 1 integrons with nine different arrangements of gene cassettes were present in 28 of 45 E. coli isolates. Twenty-nine PFGE groups and 24 MLST types were identified in their clonal structure. This study revealed that E. coli isolates from beef contained high diversity of antimicrobial resistance genes, integrons, and genotypes. These results highlighted the role of beef meat as a potential source for multidrug-resistant E. coli strains and the need for controlling beef safety.
Hanning, Irene; Gilmore, David; Pendleton, Sean; Fleck, Scott; Clement, Ashley; Park, Si Hong; Scott, Erin; Ricke, Steven C
2012-01-01
Staphylococcus aureus can be carried on the skin and nasal passages of humans and animals as a commensal. A case of human methicillin-resistant S. aureus infection resulting from contact with pork has been reported. Poultry carcasses are sold at retail with the skin intact, but pork and beef typically are not. Thus, the risk of methicillin-resistant S. aureus human infection from whole raw poultry carcasses may be greater than that of exposure from pork or beef. The objective of this study was to isolate and characterize S. aureus from whole retail poultry carcasses and compare the isolates to S. aureus isolates from humans. A total of 25 S. aureus isolates were collected from 222 whole poultry carcasses. The isolates were characterized phenotypically with antibiotic resistance disc diffusion assays and genotypically using multilocus sequence typing. A total of 17 S. aureus isolates obtained from healthy humans were included and characterized in the same way as the poultry isolates. Staphylococcus spp. were recovered from all poultry carcasses. Only 25 poultry carcasses (11.2%) were contaminated with S. aureus. Of these 25 isolates, 36% were resistant to at least one of the antibiotics tested and 20% were resistant to two or more antibiotics tested. However, 100% of the human isolates were resistant to at least one of the antibiotics and 94% were resistant to two or more antibiotics. The results of the multilocus sequence typing indicate that most of the isolates grouped according to source. These results indicate a low prevalence of S. aureus present in poultry, and the isolates were not phenotypically similar to human isolates. The low number of S. aureus isolates from this study indicates that chicken carcasses would appear to not be a significant source of this bacterium.
USDA-ARS?s Scientific Manuscript database
The use of genetic markers to aid in selection decisions to improve carcass and growth characteristics is of great interest to the beef industry. However, it is important to examine potential antagonistic interactions with fertility in the cows before widespread application of marker-assisted selec...
Berthiaume, R; Mandell, I; Faucitano, L; Lafrenière, C
2006-08-01
Forty Angus-cross steers were used to evaluate 5 beef cattle management regimens for their effect on growth performance, carcass characteristics, and cost of production. A 98-d growing phase was incorporated using grass silage with or without growth promotants (trenbolone acetate + estradiol implants, and monensin in the feed) or soybean meal. Dietary treatments in the finishing phase were developed, with or without addition of the same growth promotants, based on exclusive feeding of forages with minimal supplementation or the feeding of barley-based diets. Overall, ADG for animals treated with growth promotants or fed supplemented diets (soybean meal and barley) was increased (P < 0.01) by 25 and 21%, respectively, compared with steers reared on grass silage alone and not treated with growth promotants. Except for HCW (P < 0.01), the use of growth promotants did not affect carcass measurements. Increasing the proportion of barley in the diet of steers finished on forage produced a heavier HCW (P < 0.01) and a greater (P < 0.01) quality grade. Because of their lower HCW and quality grade, cattle targeted to a forage-fed, nonimplanted beef market would need to garner a 16% premium to be economically competitive with cattle finished conventionally.
Lambertz, C; Farke-Röver, A; Moors, E; Gauly, M
2015-01-01
The objectives of this study were to evaluate the effects of Burdizzo castration and abrupt weaning on the behaviour, blood traits and performance of beef calves when weaning was conducted concurrently or consecutively to castration. In total, 64 male beef calves aged between 6 and 7 months were assigned to a 2×2 factorial design with the following treatment groups (n=16 animals per treatment): (1) castrated and concurrently weaned in week 0 (CAS-WEA); (2) castrated in week 0 and weaned in week 4 (CAS-CON); (3) bulls weaned in week 0 (BUL-WEA); and (4) bulls weaned in week 4 (BUL-CON). The behaviour of the calves was observed for 3 days following weaning. Blood was collected weekly from weeks 0 to 5 and analysed for the acute-phase protein haptoglobin, and neutrophil and lymphocyte percentages. BW was recorded weekly from weeks 0 to 7. Animals were slaughtered at 17 months and weight, dressing percentage and carcass classifications were recorded. On day 1 after weaning, the number of vocalizations (calls/10 min) was higher in BUL-WEA (7.2) and CAS-WEA (5.4) than in calves of CAS-CON (2.8) and BUL-CON (2.9) groups (P<0.05). From days 1 to 3 vocalizations decreased in all groups. CAS-CON and BUL-CON animals spent 20% lying on day 1 after weaning compared with 40% in CAS-WEA and BUL-WEA calves (P<0.05). The haptoglobin concentration decreased during the first 5 weeks after weaning in all groups independent of the castration, weaning group or its interaction (P>0.05). WEA groups showed an increased average daily gain (ADG) during weeks 0 to 3 and a reduced ADG during 4 to 7 weeks in comparison with CON animals. At slaughter, bulls were about 80 kg heavier than castrates and had a superior dressing percentage and carcass classification (P>0.05). In conclusion, weaning had a greater effect on the number of vocalizations, standing/walking and lying behaviour and ADG compared with Burdizzo castration. In comparison with undertaking the procedures separately, concurrent castration and weaning neither affected behaviour and haematological parameters nor impaired performance. There was no evidence that the concurrent application of both treatments markedly increased the stress response compared with their application at intervals of a few weeks.
Robinson, D L; Cafe, L M; Greenwood, P L
2013-03-01
This paper reviews results of studies on effects of fetal programming and maternal nutrition during pregnancy on growth, efficiency, carcass, muscle, and meat quality characteristics of cattle. It includes results from our Australian Beef Cooperative Research Centre studies on factors such as chronic severe nutritional restriction from approximately d 80 of pregnancy to parturition and/or throughout lactation used to create early-life growth differences in the offspring of cows within pasture-based systems and the effect of these treatments on production characteristics to 30 mo of age. Fetal programming and related maternal effects are most pronounced and explain substantial amounts of variation for growth-related production characteristics such as BW, feed intake, carcass weight, muscle weights, meat yield, and fat and bone weights at any given age but are less evident when assessed at the same BW and carcass weight. Some effects of maternal and early-life factors in our studies were evident for efficiency traits but fewer affected beef quality characteristics at 30 mo of age, explaining only small amounts of variation in these traits. It is difficult to uncouple maternal nutritional effects specific to prenatal life from those that carry over to the postnatal period until weaning, particularly the effects of maternal nutrition during pregnancy on subsequent lactational performance. Hence, experimental design considerations for studying fetal programming effects on offspring during later life are discussed in relation to minimizing or removing prenatal and postnatal confounding effects. The relative contribution of fetal programming to the profitability of beef production systems is also briefly discussed. In this regard, the importance of health and survival of cows and calves, the capacity of cows to rebreed in a timely manner, and the efficiency with which feed and other resources are used cannot be overemphasized in relation to economics, welfare, and the environment.
USDA-ARS?s Scientific Manuscript database
A 2-yr study evaluated growing and finishing performance, as well as carcass characteristics of spring-born calves backgrounded using 1 of 3 treatments: 1) corn residue grazing supplemented 6 d/wk with 2.77 kg DM/head of distillers (CRD), 2) oat-brassica forage grazing (OBF), or 3) drylotting on a g...
Mineral retention of growing and finishing beef cattle across different production systems
USDA-ARS?s Scientific Manuscript database
Calcium, P, Mg, K, and S retention in carcass, offal, and viscera were measured in 2 beef cattle experiments. Experiment 1 used 30 steers (245 kg of BW; SE = 4 kg) wintered at 3 levels of gain: grazing wheat pasture at a (1) high or (2) low rate of gain or (3) grazing dormant native range, and all w...
USDA-ARS?s Scientific Manuscript database
Two experiments were conducted to evaluate the effects of feeding condensed distillers solubles (DS) and crude glycerin alone or in combination on performance of finishing beef cattle and in vitro fermentation. In both experiments, dietary treatments consisted of a steam flaked corn (SFC) based diet...
Restaurant consumer acceptance of beef loin strip steaks tenderized with calcium chloride.
Hoover, L C; Cook, K D; Miller, M F; Huffman, K L; Wu, C K; Lansdell, J L; Ramsey, C B
1995-12-01
Beef strip loins from either the right or left side of 22 carcasses of Bos indicus-type steers were injected with 200 mM calcium chloride (CaCl2) solution at 5% (wt/wt) to determine its effect on tenderness and other selected quality traits of steaks. Loins from opposite sides of the carcasses were untreated and served as the control. The steaks were evaluated for tenderness, juiciness, flavor intensity, tenderness acceptability, and overall acceptability by 62 restaurant consumers over a 6-wk period. The CaCl2 injection improved (P < .05) tenderness and flavor intensity ratings by the restaurant consumers. Tenderness acceptability and overall acceptability were improved 23 and 17%, respectively, by the CaCl2 injection. Flavor was not compromised by the CaCl2 injection. The CaCl2-treated steaks were rated superior(P < .05) for flavor compared to the control steaks. Restaurant consumers preferred the beef loin strip steaks injected with 200 mM CaCl2 at 5% (wt/wt). The results of this study are interpreted to indicate that, from a restaurant consumer perspective, CaCl2 injection is an acceptable means of making beef a more consistently tender product.
Beyi, Ashenafi Feyisa; Fite, Akafete Teklu; Tora, Ephrem; Tafese, Asdesach; Genu, Tadele; Kaba, Tamirat; Beyene, Tariku Jibat; Beyene, Takele; Korsa, Mesula Geloye; Tadesse, Fanos; De Zutter, Lieven; Goddeeris, Bruno Maria; Cox, Eric
2017-03-03
Ethiopia bears the largest burden of foodborne diseases in Africa, and diarrheal diseases are the second leading causes of premature deaths. Enterohemorrhagic Escherichia coli O157 causes an asymptomatic infection to severe diarrhea and/or hemolytic-uremic syndrome in humans. A total of 440 beef carcass and in-contact surface swabs from 55 butcher shops and 85 minced beef samples from 40 restaurants in central Ethiopia were collected and examined for the presence of E. coli O157. Standard microbiological methods were used to isolate and identify E. coli O157 and to characterize the antimicrobial resistance of the isolates. E. coli O157 was detected in 4.5% carcass swabs (n = 5) and 3.6% cutting board swabs (n = 4) samples from butcher shops. E. coli O157 was not detected in any of the minced beef samples obtained from restaurants. All isolates (n = 9) were 100% susceptible to five drugs, but five isolates were resistant to amoxicillin, two isolates to streptomycin and three isolates to chloramphenicol. One isolate was resistant to two drugs and another to three drugs. The present study shows a low prevalence of E. coli O157 in beef sold at butcher shops. Nevertheless, given the low infective dose of this pathogen and the deep-rooted tradition of consuming raw or undercooked beef, the current prevalence should not be considered lightly from a public health perspective.
Current situation and future prospects for beef production in South Korea.
Chung, Ki Yong; Lee, Seung Hwan; Cho, Soo Hyun; Kwon, Eung Gi; Lee, Jun Heon
2018-05-31
Hanwoo cattle are an important food source in Korea and their supply can have a major impact on meat availability for Korean consumers. The Hanwoo population was 1.8 million head in 2005 and gradually increased to 2.6 million in 2015. Per capita beef consumption has also increased, to 11.6 kg per year in 2015, and is expected to continue to increase. Because intramuscular fat (IMF) percentage is a critical contributor to meat quality, Hanwoo cattle are fed a high-energy corn-based diet for long fattening periods. Long fed diet causes significant alterations in fat percentage in the loin muscle and other areas of the carcass. However, these long feeding periods increase feeding costs and beef prices. Recently, there has been increased Korean consumer demand for lean beef which has less fat, but is tender and priced more reasonably. These consumer demands on the Korean beef industry are driving differing beef production systems and also changes to the beef grading methodology. Korean government has made a significant investment to select bulls with favorable production traits using progeny testing. Progeny tested bull semen has been disseminated to all Hanwoo farmers. Beef traceability system in Korea was employed for all cattle breeds since 2009. Hanwoo cattle are ear-marked with a 12-digit identification number from birth to slaughter. This number allows traceability of the management history of individual cattle, and also provides information to consumers. Traceability including management information such as herd, farm, year of birth, and carcass data determine estimated breeding values of Hanwoo. For a sustainable Hanwoo industry, research scientists in Korea have attempted to develop feeds for efficient fattening periods and precision feeding systems based on genetic information for Hanwoo cattle. These initiatives aim to Korean consumer demands for beef and provide more precision management in beef production in Korea.
USDA-ARS?s Scientific Manuscript database
Forty-eight individually fed crossbred steers (initial BW = 381 ± 7.61 kg) were used to determine the effects of glycerin (GLY) concentration in steam-flaked corn (SFC)-based diets with added yellow grease on animal performance and carcass characteristics. Glycerin was included at 0, 2.5, 5, and 10...
Agga, Getahun E.; Bosilevac, Joseph M.; Brichta-Harhay, Dayna M.; Shackelford, Steven D.; Wang, Rong; Wheeler, Tommy L.; Arthur, Terrance M.
2014-01-01
Specific concerns have been raised that third-generation cephalosporin-resistant (3GCr) Escherichia coli, trimethoprim-sulfamethoxazole-resistant (COTr) E. coli, 3GCr Salmonella enterica, and nalidixic acid-resistant (NALr) S. enterica may be present in cattle production environments, persist through beef processing, and contaminate final products. The prevalences and concentrations of these organisms were determined in feces and hides (at feedlot and processing plant), pre-evisceration carcasses, and final carcasses from three lots of fed cattle (n = 184). The prevalences and concentrations were further determined for strip loins from 103 of the carcasses. 3GCr Salmonella was detected on 7.6% of hides during processing and was not detected on the final carcasses or strip loins. NALr S. enterica was detected on only one hide. 3GCr E. coli and COTr E. coli were detected on 100.0% of hides during processing. Concentrations of 3GCr E. coli and COTr E. coli on hides were correlated with pre-evisceration carcass contamination. 3GCr E. coli and COTr E. coli were each detected on only 0.5% of final carcasses and were not detected on strip loins. Five hundred and 42 isolates were screened for extraintestinal pathogenic E. coli (ExPEC) virulence-associated markers. Only two COTr E. coli isolates from hides were ExPEC, indicating that fed cattle products are not a significant source of ExPEC causing human urinary tract infections. The very low prevalences of these organisms on final carcasses and their absence on strip loins demonstrate that current sanitary dressing procedures and processing interventions are effective against antimicrobial-resistant bacteria. PMID:25398858
Schmidt, John W; Agga, Getahun E; Bosilevac, Joseph M; Brichta-Harhay, Dayna M; Shackelford, Steven D; Wang, Rong; Wheeler, Tommy L; Arthur, Terrance M
2015-01-01
Specific concerns have been raised that third-generation cephalosporin-resistant (3GC(r)) Escherichia coli, trimethoprim-sulfamethoxazole-resistant (COT(r)) E. coli, 3GC(r) Salmonella enterica, and nalidixic acid-resistant (NAL(r)) S. enterica may be present in cattle production environments, persist through beef processing, and contaminate final products. The prevalences and concentrations of these organisms were determined in feces and hides (at feedlot and processing plant), pre-evisceration carcasses, and final carcasses from three lots of fed cattle (n = 184). The prevalences and concentrations were further determined for strip loins from 103 of the carcasses. 3GC(r) Salmonella was detected on 7.6% of hides during processing and was not detected on the final carcasses or strip loins. NAL(r) S. enterica was detected on only one hide. 3GC(r) E. coli and COT(r) E. coli were detected on 100.0% of hides during processing. Concentrations of 3GC(r) E. coli and COT(r) E. coli on hides were correlated with pre-evisceration carcass contamination. 3GC(r) E. coli and COT(r) E. coli were each detected on only 0.5% of final carcasses and were not detected on strip loins. Five hundred and 42 isolates were screened for extraintestinal pathogenic E. coli (ExPEC) virulence-associated markers. Only two COT(r) E. coli isolates from hides were ExPEC, indicating that fed cattle products are not a significant source of ExPEC causing human urinary tract infections. The very low prevalences of these organisms on final carcasses and their absence on strip loins demonstrate that current sanitary dressing procedures and processing interventions are effective against antimicrobial-resistant bacteria. Copyright © 2015, American Society for Microbiology. All Rights Reserved.
Wambui, Joseph; Lamuka, Peter; Karuri, Edward; Matofari, Joseph; Njage, Patrick Murigu Kamau
2018-04-01
The microbial contamination level profiles (MCLPs) attributed to contamination of beef carcasses, personnel, and equipment in five Kenyan small and medium enterprise slaughterhouses were determined. Aerobic plate counts, Enterobacteriaceae, Staphylococcus, and Salmonella were used to determine contamination at four different slaughter stages, namely, dehiding, evisceration, splitting, and dispatch. Microbiological criteria of the four microorganisms were used to score contamination levels (CLs) as poor (0), poor to average (1), average (2), or good (3). MCLPs were further assigned to carcasses, personnel, and equipment at each stage by summing up the CL scores. The CL score attributed to aerobic plate count contamination was 2 or 3 for carcasses but 0 for personnel and equipment in almost all slaughterhouses. A score of 0 on carcasses was mostly attributed to Enterobacteriaceae at evisceration and to Salmonella at dehiding and evisceration. In addition, a score of 0 was mostly attributed to Staphylococcus contamination of personnel at dehiding. A score of 3 was attributed mostly to Enterobacteriaceae on hands at splitting, whereas a score of 2 was mostly attributed to the clothes at dehiding and evisceration. A CL score of 3 was mostly attributed to Enterobacteriaceae and Salmonella contamination of equipment at dehiding and splitting, respectively. Although CLs attributed to contamination of carcasses, personnel, and equipment ranged from 0 to 3, the maximum MCLP score of 9 was only attained in carcasses from two slaughterhouses at dehiding and from one slaughterhouse at dispatch. There is, therefore, a lot of room for small and medium enterprise slaughterhouses to improve their food safety objectives by improving food safety management systems at the points characterized by low CL scores.
Mehrban, Hossein; Lee, Deuk Hwan; Moradi, Mohammad Hossein; IlCho, Chung; Naserkheil, Masoumeh; Ibáñez-Escriche, Noelia
2017-01-04
Hanwoo beef is known for its marbled fat, tenderness, juiciness and characteristic flavor, as well as for its low cholesterol and high omega 3 fatty acid contents. As yet, there has been no comprehensive investigation to estimate genomic selection accuracy for carcass traits in Hanwoo cattle using dense markers. This study aimed at evaluating the accuracy of alternative statistical methods that differed in assumptions about the underlying genetic model for various carcass traits: backfat thickness (BT), carcass weight (CW), eye muscle area (EMA), and marbling score (MS). Accuracies of direct genomic breeding values (DGV) for carcass traits were estimated by applying fivefold cross-validation to a dataset including 1183 animals and approximately 34,000 single nucleotide polymorphisms (SNPs). Accuracies of BayesC, Bayesian LASSO (BayesL) and genomic best linear unbiased prediction (GBLUP) methods were similar for BT, EMA and MS. However, for CW, DGV accuracy was 7% higher with BayesC than with BayesL and GBLUP. The increased accuracy of BayesC, compared to GBLUP and BayesL, was maintained for CW, regardless of the training sample size, but not for BT, EMA, and MS. Genome-wide association studies detected consistent large effects for SNPs on chromosomes 6 and 14 for CW. The predictive performance of the models depended on the trait analyzed. For CW, the results showed a clear superiority of BayesC compared to GBLUP and BayesL. These findings indicate the importance of using a proper variable selection method for genomic selection of traits and also suggest that the genetic architecture that underlies CW differs from that of the other carcass traits analyzed. Thus, our study provides significant new insights into the carcass traits of Hanwoo cattle.
Gagaoua, Mohammed; Monteils, Valérie; Couvreur, Sébastien; Picard, Brigitte
2017-09-20
Data from birth to slaughter of cull cows allowed using a PCA-based approach coupled with the iterative K-means algorithm the identification of three rearing practices classes. The classes were different in their carcass characteristics. Old cows raised mainly on pasture have better carcass characteristics, while having an equivalent tenderness, juiciness, flavor, intramuscular fat content, and pHu to those fattened with hay or haylage. The Longissimus thoracis muscle of the cows raised on pasture (with high physical activity) showed greater proportions of IIA fibers at the expense of the fast IIX ones. Accordingly, the meat of these animals have better color characteristics. Superoxide dismutase (SOD1) and αB-crystallin quantified by Dot-Blot were the only other biomarkers to be more abundant in "Grass" class compared to "Hay" and "Haylage" classes. The relationships between the biomarkers and the 6 carcass and 11 meat quality traits were investigated using multiple regression analyses per rearing practices. The associations were rearing practice class and phenotype trait-dependent. ICDH and TP53 were common for the three classes, but the direction of their entrance was different. In addition, rearing practices and carcass traits were not related with Hsp70-Grp75 and μ-calpain abundances. The other relationships were specific for two or one rearing practices class. The rearing practices dependency of the relationships was also found with meat quality traits. Certain proteins were for the first time related with some beef quality traits. MyHC-IIx, PGM1, Hsp40, ICDH, and Hsp70-Grp75 were common for the three rearing practices classes and retained to explain at list one beef quality trait. A positive relationship was found between PGM1 and hue angle irrespective of rearing practices class. This study confirms once again that production-related traits in livestock are the result of sophisticated biological processes finely orchestrated during the life of the animal and soon after slaughter.
Doran, Anthony G; Berry, Donagh P; Creevey, Christopher J
2014-10-01
Four traits related to carcass performance have been identified as economically important in beef production: carcass weight, carcass fat, carcass conformation of progeny and cull cow carcass weight. Although Holstein-Friesian cattle are primarily utilized for milk production, they are also an important source of meat for beef production and export. Because of this, there is great interest in understanding the underlying genomic structure influencing these traits. Several genome-wide association studies have identified regions of the bovine genome associated with growth or carcass traits, however, little is known about the mechanisms or underlying biological pathways involved. This study aims to detect regions of the bovine genome associated with carcass performance traits (employing a panel of 54,001 SNPs) using measures of genetic merit (as predicted transmitting abilities) for 5,705 Irish Holstein-Friesian animals. Candidate genes and biological pathways were then identified for each trait under investigation. Following adjustment for false discovery (q-value < 0.05), 479 quantitative trait loci (QTL) were associated with at least one of the four carcass traits using a single SNP regression approach. Using a Bayesian approach, 46 QTL were associated (posterior probability > 0.5) with at least one of the four traits. In total, 557 unique bovine genes, which mapped to 426 human orthologs, were within 500kbs of QTL found associated with a trait using the Bayesian approach. Using this information, 24 significantly over-represented pathways were identified across all traits. The most significantly over-represented biological pathway was the peroxisome proliferator-activated receptor (PPAR) signaling pathway. A large number of genomic regions putatively associated with bovine carcass traits were detected using two different statistical approaches. Notably, several significant associations were detected in close proximity to genes with a known role in animal growth such as glucagon and leptin. Several biological pathways, including PPAR signaling, were shown to be involved in various aspects of bovine carcass performance. These core genes and biological processes may form the foundation for further investigation to identify causative mutations involved in each trait. Results reported here support previous findings suggesting conservation of key biological processes involved in growth and metabolism.
Network Analysis Reveals Putative Genes Affecting Meat Quality in Angus Cattle.
Mateescu, Raluca G; Garrick, Dorian J; Reecy, James M
2017-01-01
Improvements in eating satisfaction will benefit consumers and should increase beef demand which is of interest to the beef industry. Tenderness, juiciness, and flavor are major determinants of the palatability of beef and are often used to reflect eating satisfaction. Carcass qualities are used as indicator traits for meat quality, with higher quality grade carcasses expected to relate to more tender and palatable meat. However, meat quality is a complex concept determined by many component traits making interpretation of genome-wide association studies (GWAS) on any one component challenging to interpret. Recent approaches combining traditional GWAS with gene network interactions theory could be more efficient in dissecting the genetic architecture of complex traits. Phenotypic measures of 23 traits reflecting carcass characteristics, components of meat quality, along with mineral and peptide concentrations were used along with Illumina 54k bovine SNP genotypes to derive an annotated gene network associated with meat quality in 2,110 Angus beef cattle. The efficient mixed model association (EMMAX) approach in combination with a genomic relationship matrix was used to directly estimate the associations between 54k SNP genotypes and each of the 23 component traits. Genomic correlated regions were identified by partial correlations which were further used along with an information theory algorithm to derive gene network clusters. Correlated SNP across 23 component traits were subjected to network scoring and visualization software to identify significant SNP. Significant pathways implicated in the meat quality complex through GO term enrichment analysis included angiogenesis, inflammation, transmembrane transporter activity, and receptor activity. These results suggest that network analysis using partial correlations and annotation of significant SNP can reveal the genetic architecture of complex traits and provide novel information regarding biological mechanisms and genes that lead to complex phenotypes, like meat quality, and the nutritional and healthfulness value of beef. Improvements in genome annotation and knowledge of gene function will contribute to more comprehensive analyses that will advance our ability to dissect the complex architecture of complex traits.
Marley, Christina L.; Fychan, Rhun; Davies, John W.; Scollan, Nigel D.; Richardson, R. Ian; Theobald, Vince J.; Genever, Elizabeth; Forbes, Andy B.; Sanderson, Ruth
2014-01-01
An experiment investigated whether the inclusion of chicory (Cichorium intybus) in swards grazed by beef steers altered their performance, carcass characteristics or parasitism when compared to steers grazing perennial ryegrass (Lolium perenne). Triplicate 2-ha plots were established with a chicory/ryegrass mix or ryegrass control. Forty-eight Belgian Blue-cross steers were used in the first grazing season and a core group (n = 36) were retained for finishing in the second grazing season. The experiment comprised of a standardisation and measurement period. During standardisation, steers grazed a ryegrass/white clover pasture as one group. Animals were allocated to treatment on the basis of liveweight, body condition and faecal egg counts (FEC) determined 7 days prior to the measurement period. The measurement period ran from 25 May until 28 September 2010 and 12 April until 11 October 2011in the first and second grazing year. Steers were weighed every 14 days at pasture or 28 days during housing. In the first grazing year, faecal samples were collected for FEC and parasite cultures. At the end of the first grazing year, individual blood samples were taken to determine O. ostertagi antibody and plasma pepsinogen levels. During winter, animals were housed as one group and fed silage. In the second grazing year, steers were slaughtered when deemed to reach fat class 3. Data on steer performance showed no differences in daily live-weight gain which averaged 1.04 kg/day. The conformation, fat grade and killing out proportion of beef steers grazing chicory/ryegrass or ryegrass were not found to differ. No differences in FEC, O. ostertagi antibody or plasma pepsinogen levels of beef steers grazing either chicory/ryegrass or ryegrass were observed. Overall, there were no detrimental effects of including chicory in swards grazed by beef cattle on their performance, carcass characteristics or helminth parasitism, when compared with steers grazing ryegrass. PMID:24489708
Claw and limb disorders in 12 Norwegian beef-cow herds
Fjeldaas, Terje; Nafstad, Ola; Fredriksen, Bente; Ringdal, Grethe; Sogstad, Åse M
2007-01-01
Background The main aim of the study was to assess the prevalence of claw and limb disorders in Norwegian beef-cow herds. Methods Twenty-six herds with ≥15 cow-years were selected by computerized systematic assignment from the three most beef cattle-dense regions of Norway. The study population consisted of 12 herds with 28 heifers and 334 cows. The animals were trimmed and examined once by claw trimmers during the late winter and spring of 2003. The seven claw trimmers had been taught diagnosing and recording of claw lesions. Environment, feeding and management routines, age and breed, culling and carcass characteristics were also recorded. Results Lameness was recorded in 1.1% of the animals, and only in hind claws. Pericarpal swellings were recorded in one animal and peritarsal lesions in none. In total, claw and limb disorders including lameness were recorded in 29.6% of the animals, 4.1% with front and 28.2% with hind limb disorders, respectively. Most lesions were mild. Laminitis-related claw lesions were recorded in 18.0% of the animals and infectious lesions in 16.6%. The average claw length was 84 mm in front claws and 89 mm in hind claw. Both laminitis-related and infectious claw lesions were more prevalent with increasing age. Carcasses from animals with claw and limb disorders were on average 34 kg heavier than carcasses from animals without such disorders (p = 0.02). Our results also indicate association between some management factors and claw lesions. Conclusion The study shows that the prevalence of lameness was low in 12 Norwegian beef-cow herds compared to beef-cattle herds in other countries and also that there were less claw and limb disorders in these herds compared to foreign dairy-cattle herds. The prevalence of lameness and white-line fissures was approximately the same as in Norwegian dairy herds whereas less dermatitis, heel-horn erosions, haemorrhages of the sole and the white line and sole ulcers were recorded. PMID:17892582
Weidner, Lauren M; Gemmellaro, M Denise; Tomberlin, Jeffery K; Hamilton, George C
2017-09-01
Information about blow fly (Diptera: Calliphoridae) species distributions can be valuable for criminal investigations, with regards to determining movement of remains from one location to another and time of colonization estimates, making these data extremely useful. Past work has been conducted on initial species community structure across New Jersey, USA using traps baited with beef liver; however, if these same species frequent vertebrate carrion remains unclear. In order to evaluate these data, piglet carcasses were placed out once every two weeks for a year in New Brunswick, New Jersey, USA. The same methods were implemented as those used for traps baited with beef liver, with length of collections being based on ADD values. Seven calliphorid species, Calliphora vicina (Robineau-Desvoidy), Lucilia sericata (Meigen), Lucilia coeruleiviridis (Macquart), Phormia regina (Meigen), Pollenia pediculata Macquart, Pollenia rudis (F.) and Protophormia terraenovae (Robineau-Desvoidy) were collected from the carcasses. During this experiment L. sericata, L. coeruleiviridis and P. regina were the dominant adult blow flies captured, totaling 38.2%, 29.2% and 29.2% respectively of all adults caught. All three species colonized the carcasses as well, although not all were dominant colonizers. C. vicina was recorded ovipositing in December, while the piglet was submerged in approximately 5cm of snow. All species that totaled at least 1% of the total collection (adults captured and larvae reared) were the same across baited traps and carcasses. This study supports the use of beef liver baits for surveying forensically important blow flies and the application of such information to forensic investigations. Copyright © 2017 Elsevier B.V. All rights reserved.
Gill, C O; McGinnis, J C; Badoni, M
1996-08-01
Swab samples were obtained from 3 sites on the surfaces of beef carcasses passing through a high speed dressing process, with 24 samples from each site being obtained at each of 4 points in the process. The aerobic microflora recovered from each swab after incubation at 25 degrees C was enumerated and characterized, and numbers of coliforms and Escherichia coli were determined. The data on aerobic flora indicated that skinning results in similar contamination of all 3 sites, that further deposition of bacteria at the brisket site occurs after skinning, and that trimming and washing achieve modest decontamination of the neck and brisket site, and extensive decontamination of the rump site. Changes in flora compositions during processing were too limited to much affect the assessment based on the aerobic flora total counts alone. The E. coli data indicated that during skinning the rump site was more heavily contaminated with faecal organisms than the other sites, that contamination of the brisket site is little altered between skinning and carcass splitting, although there is an extensive redistribution of E. coli at the neck site and sporadic, limited decontamination of the rump site, and that trimming and washing do not decontaminate the neck or rump sites, but that the rump site is extensively decontaminated by trimming. There was good correlation between E. coli and coliform counts, but weak correlation between E. coli and aerobic, 25 degrees C, counts. The findings suggest that assessments of beef carcass dressing processes for Hazard Analysis: Critical Control Point (HACCP) purposes should be based on enumerations of E. coli, or perhaps coliforms, rather than of the aerobic flora, to avoid important misunderstandings of the hygienic effects of the various operations in a process.
Acheson, R J; Woerner, D R; Tatum, J D
2014-04-01
This study compared sensory properties of LM steaks from A maturity and B maturity or older carcasses that were produced by grain-finished steers and heifers classified as less than 30 mo old at the time of slaughter using dentition. Carcasses were selected to represent 2 maturity groups and 3 marbling categories within each maturity group, resulting in 6 maturity × marbling subclasses, each subclass consisting of 75 carcasses. Maturity groups consisted of carcasses classified by USDA graders as either A(00) to A(99) overall (A) maturity or B(00) to C(99) overall (B-C) maturity; marbling categories consisted of carcasses with instrument marbling scores of Slight (SL), Small (SM), or Modest(00) or greater (MT+). Carcasses were selected in pairs so that each carcass chosen to represent the B-C maturity group was paired with an A maturity carcass of the same sex and marbling score (± 30 marbling units). Strip loin (LM) steaks were obtained from both sides of each carcass. After a 14-d aging period, 1 LM steak was measured for Warner-Bratzler shear force (WBSF) and slice shear force (SSF), whereas the other LM steak was used for sensory analysis by a trained descriptive attribute panel. No differences (P > 0.05) in WBSF, SSF, or sensory panel ratings for tenderness, juiciness, or flavor were detected between LM steaks from carcasses classified as A maturity and steaks from B-C maturity carcasses. However, marbling categories effectively stratified carcasses (MT+ > SM > SL) according to differences (P < 0.0001) in LM tenderness, juiciness, meaty/brothy flavor, and buttery/beef fat flavor. Increased marbling also was associated with lesser (P < 0.01) intensities of bloody/serumy and livery/organy flavors and reduced (P < 0.01) values for WBSF and SSF. Of the traits tested, only bloody/serumy flavor was affected (P < 0.05) by the maturity × marbling interaction. Interaction means showed that LM steaks from B-C maturity carcasses with SL marbling had a less intense bloody/serumy flavor than did steaks from A maturity carcasses with SL marbling. Results of this study suggest that, when applied to carcasses from grain-finished cattle whose dental ages are less than 30 mo old at the time of slaughter, USDA quality grades would be no less effective in identifying eating quality differences if the A and B-C maturity groups were combined and quality grades were assigned using only marbling.
Moore, K L; Mrode, R; Coffey, M P
2017-10-01
Visual Image analysis (VIA) of carcass traits provides the opportunity to estimate carcass primal cut yields on large numbers of slaughter animals. This allows carcases to be better differentiated and farmers to be paid based on the primal cut yields. It also creates more accurate genetic selection due to high volumes of data which enables breeders to breed cattle that better meet the abattoir specifications and market requirements. In order to implement genetic evaluations for VIA primal cut yields, genetic parameters must first be estimated and that was the aim of this study. Slaughter records from the UK prime slaughter population for VIA carcass traits was available from two processing plants. After edits, there were 17 765 VIA carcass records for six primal cut traits, carcass weight as well as the EUROP conformation and fat class grades. Heritability estimates after traits were adjusted for age ranged from 0.32 (0.03) for EUROP fat to 0.46 (0.03) for VIA Topside primal cut yield. Adjusting the VIA primal cut yields for carcass weight reduced the heritability estimates, with estimates of primal cut yields ranging from 0.23 (0.03) for Fillet to 0.29 (0.03) for Knuckle. Genetic correlations between VIA primal cut yields adjusted for carcass weight were very strong, ranging from 0.40 (0.06) between Fillet and Striploin to 0.92 (0.02) between Topside and Silverside. EUROP conformation was also positively correlated with the VIA primal cuts with genetic correlation estimates ranging from 0.59 to 0.84, whereas EUROP fat was estimated to have moderate negative correlations with primal cut yields, estimates ranged from -0.11 to -0.46. Based on these genetic parameter estimates, genetic evaluation of VIA primal cut yields can be undertaken to allow the UK beef industry to select carcases that better meet abattoir specification and market requirements.
Bonny, S P F; Hocquette, J-F; Pethick, D W; Legrand, I; Wierzbicki, J; Allen, P; Farmer, L J; Polkinghorne, R J; Gardner, G E
2018-04-02
The Meat Standards Australia (MSA) grading scheme has the ability to predict beef eating quality for each 'cut×cooking method combination' from animal and carcass traits such as sex, age, breed, marbling, hot carcass weight and fatness, ageing time, etc. Following MSA testing protocols, a total of 22 different muscles, cooked by four different cooking methods and to three different degrees of doneness, were tasted by over 19 000 consumers from Northern Ireland, Poland, Ireland, France and Australia. Consumers scored the sensory characteristics (tenderness, flavor liking, juiciness and overall liking) and then allocated samples to one of four quality grades: unsatisfactory, good-every-day, better-than-every-day and premium. We observed that 26% of the beef was unsatisfactory. As previously reported, 68% of samples were allocated to the correct quality grades using the MSA grading scheme. Furthermore, only 7% of the beef unsatisfactory to consumers was misclassified as acceptable. Overall, we concluded that an MSA-like grading scheme could be used to predict beef eating quality and hence underpin commercial brands or labels in a number of European countries, and possibly the whole of Europe. In addition, such an eating quality guarantee system may allow the implementation of an MSA genetic index to improve eating quality through genetics as well as through management. Finally, such an eating quality guarantee system is likely to generate economic benefits to be shared along the beef supply chain from farmers to retailors, as consumers are willing to pay more for a better quality product.
Fitzsimons, C; Kenny, D A; McGee, M
2014-06-01
This study examined the relationship of residual feed intake (RFI) with digestion, body composition, carcass traits and visceral organ weights in beef bulls offered a high concentrate diet. Individual dry matter (DM) intake (DMI) and growth were measured in a total of 67 Simmental bulls (mean initial BW 431 kg (s.d.=63.7)) over 3 years. Bulls were offered concentrates (860 g/kg rolled barley, 60 g/kg soya bean meal, 60 g/kg molasses and 20 g/kg minerals per vitamins) ad libitum plus 0.8 kg grass silage DM daily for 105 days pre-slaughter. Ultrasonic muscle and fat depth, body condition score (BCS), muscularity score, skeletal measurements, blood metabolites, rumen fermentation and total tract digestibility (indigestible marker) were determined. After slaughter, carcasses and perinephric and retroperitoneal fat were weighed, carcasses were graded for conformation and fat score and weight of non-carcass organs, liver, heart, kidneys, lungs, gall bladder, spleen, reticulo-rumen full and empty and intestines full, were determined. The residuals of the regression of DMI on average daily gain (ADG), mid-test metabolic BW (BW0.75) and the fixed effect of year, using all animals, were used to compute individual RFI coefficients. Animals were ranked on RFI and assigned to high (inefficient), medium or low groupings. Overall mean ADG and daily DMI were 1.6 kg (s.d.=0.36) and 9.4 kg (s.d.=1.16), respectively. High RFI bulls consumed 7 and 14% more DM than medium and low RFI bulls, respectively (P<0.001). No differences between high and low RFI bulls were detected (P>0.05) for ADG, BW, BCS, skeletal measurements, muscularity scores, ultrasonic measurements, carcass weight, perinephric and retroperitoneal fat weight, kill-out proportion and carcass conformation and fat score. However, regression analysis indicated that a 1 kg DM/day increase in RFI was associated with a decrease in kill-out proportion of 20 g/kg (P<0.05) and a decrease in carcass conformation of 0.74 units (P<0.05). Weight of non-carcass organs did not differ (P>0.05) between RFI groups except for the empty weight of reticulo-rumen, which was 8% lighter (P=0.05) in low RFI compared with high RFI bulls. Regression analysis indicated that a 1 kg DM/day increase in RFI was associated with a 1 kg increase in reticulo-rumen empty weight (P<0.05). Of the visceral organs measured, the reticulo-rumen may be a biologically significant contributory factor to variation in RFI in beef bulls finished on a high concentrate diet.
Liu, Yuqing; Mao, Yanwei; Zhang, Yimin; Liang, Rongrong; Wang, Renhuan; Zhu, Lixian; Meng, Xianyong; Luo, Xin
2015-02-01
This study evaluates the effects of pre-rigor temperature control on quality traits of Chinese yellow cattle M. longissimus lumborum (LL). One stepwise chilling (SC) treatment was used on one half-carcass, involved a fast chilling (-11 ± 1 °C;0.5 m/s) for 2h, then the refrigeration was stopped to hold a core temperature of 12-18 °C until 10h postmortem, followed by a 1 ± 1 °C chilling (0.5 m/s) to 48h postmortem. The other half-carcass was conventional chilled at 1 ± 1 °C (0.5 m/s) until 48h as control chilling (CC). Quality attributes were evaluated at 1, 7 and 14 days. The SC treatment resulted in decreased WBSF and increased myofibril fragmentation index compared with control. SC-treated LL at 7d postmortem had a lower WBSF than those of CC-treated at 14d. This pre-rigor temperature controlled chilling is a realistic alternative for the beef industry in China to ensure adequate tenderness and shorten aging time.
Genetic Parameter Estimates of Carcass Traits under National Scale Breeding Scheme for Beef Cattle.
Do, ChangHee; Park, ByungHo; Kim, SiDong; Choi, TaeJung; Yang, BohSuk; Park, SuBong; Song, HyungJun
2016-08-01
Carcass and price traits of 72,969 Hanwoo cows, bulls and steers aged 16 to 80 months at slaughter collected from 2002 to 2013 at 75 beef packing plants in Korea were analyzed to determine heritability, correlation and breeding value using the Multi-Trait restricted maximum likelihood (REML) animal model procedure. The traits included carcass measurements, scores and grades at 24 h postmortem and bid prices at auction. Relatively high heritability was found for maturity (0.41±0.031), while moderate heritability estimates were obtained for backfat thickness (0.20±0.018), longissimus muscle (LM) area (0.23±0.020), carcass weight (0.28±0.019), yield index (0.20±0.018), yield grade (0.16±0.017), marbling (0.28±0.021), texture (0.14±0.016), quality grade (0.26±0.016) and price/kg (0.24±0.025). Relatively low heritability estimates were observed for meat color (0.06±0.013) and fat color (0.06±0.012). Heritability estimates for most traits were lower than those in the literature. Genetic correlations of carcass measurements with characteristic scores or quality grade of carcass ranged from -0.27 to +0.21. Genetic correlations of yield grade with backfat thickness, LM area and carcass weight were 0.91, -0.43, and -0.09, respectively. Genetic correlations of quality grade with scores of marbling, meat color, fat color and texture were -0.99, 0.48, 0.47, and 0.98, respectively. Genetic correlations of price/kg with LM area, carcass weight, marbling, meat color, texture and maturity were 0.57, 0.64, 0.76, -0.41, -0.79, and -0.42, respectively. Genetic correlations of carcass price with LM area, carcass weight, marbling and texture were 0.61, 0.57, 0.64, and -0.73, respectively, with standard errors ranging from ±0.047 to ±0.058. The mean carcass weight breeding values increased by more than 8 kg, whereas the mean marbling scores decreased by approximately 0.2 from 2000 through 2009. Overall, the results suggest that genetic improvement of productivity and carcass quality could be obtained under the national scale breeding scheme of Korea for Hanwoo and that continuous efforts to improve the breeding scheme should be made to increase genetic progress.
VerifEYE: a real-time meat inspection system for the beef processing industry
NASA Astrophysics Data System (ADS)
Kocak, Donna M.; Caimi, Frank M.; Flick, Rick L.; Elharti, Abdelmoula
2003-02-01
Described is a real-time meat inspection system developed for the beef processing industry by eMerge Interactive. Designed to detect and localize trace amounts of contamination on cattle carcasses in the packing process, the system affords the beef industry an accurate, high speed, passive optical method of inspection. Using a method patented by United States Department of Agriculture and Iowa State University, the system takes advantage of fluorescing chlorophyll found in the animal's diet and therefore the digestive track to allow detection and imaging of contaminated areas that may harbor potentially dangerous microbial pathogens. Featuring real-time image processing and documentation of performance, the system can be easily integrated into a processing facility's Hazard Analysis and Critical Control Point quality assurance program. This paper describes the VerifEYE carcass inspection and removal verification system. Results indicating the feasibility of the method, as well as field data collected using a prototype system during four university trials conducted in 2001 are presented. Two successful demonstrations using the prototype system were held at a major U.S. meat processing facility in early 2002.
Molecular traceability of beef from synthetic Mexican bovine breeds.
Rodríguez-Ramírez, R; Arana, A; Alfonso, L; González-Córdova, A F; Torrescano, G; Guerrero Legarreta, I; Vallejo-Cordoba, B
2011-10-06
Traceability ensures a link between carcass, quarters or cuts of beef and the individual animal or the group of animals from which they are derived. Meat traceability is an essential tool for successful identification and recall of contaminated products from the market during a food crisis. Meat traceability is also extremely important for protection and value enhancement of good-quality brands. Molecular meat traceability would allow verification of conventional methods used for beef tracing in synthetic Mexican bovine breeds. We evaluated a set of 11 microsatellites for their ability to identify animals belonging to these synthetic breeds, Brangus and Charolais/Brahman (78 animals). Seven microsatellite markers allowed sample discrimination with a match probability, defined as the probability of finding two individuals sharing by chance the same genotypic profile, of 10(-8). The practical application of the marker set was evaluated by testing eight samples from carcasses and pieces of meat at the slaughterhouse and at the point of sale. The DNA profiles of the two samples obtained at these two different points in the production-commercialization chain always proved that they came from the same animal.
Sawyer, J E; Mathis, C P; Davis, B
2004-12-01
To evaluate production and economic effects of feeding management strategy and age on intensively managed culled beef cows, a study was conducted using 125 cows of British breeding blocked by age (Young = 3 and 4 yr olds; LowMid = 5 and 6 yr olds; HighMid = 7 and 8 yr olds; and Aged = 9 yr and older) and assigned to one of three steam-flaked corn based feeding strategies. Treatments were as follows: Conservative (CSV), 30% roughage throughout; Standard (STD), decrease roughage from 30 to 10% over 20 d; and Aggressive (AGR), decrease roughage from 30 to 10% over 10 d. There were four pens per treatment in a randomized complete block design. Cows were fed for a total of 54 d, and BW was measured on d 0, 14, 28, 42, and 54. Half the cows from each pen were randomly selected and slaughtered at a commercial abattoir, and carcass data were collected. Average daily gain, daily DMI, and G:F during each weigh period and across the entire feeding period were calculated. Over the 54-d feeding period, strategies that employed more energy-dense diets numerically increased ADG (1.28, 1.63, and 1.55 +/- 0.14 kg/d for CSV, STD, and AGR; P = 0.26) and decreased DMI (11.91, 10.74, and 10.89 +/- 0.27 kg/d for CSV, STD, and AGR; P = 0.05), such that G:F was lower for CSV than for STD or AGR (0.105, 0.150, and 0.141 +/- 0.010; P = 0.05). Carcass weight was least for the CSV strategy (298 kg) and greatest for STD (328 kg); AGR resulted in intermediate carcass weight (317 +/- 6 kg; P = 0.04). Total cost of gain was over 30% greater for CSV strategy than for STD or AGR strategies (P < 0.01). In many cases, block effects (age) had a greater effect on responses than treatments. Average daily gain, DMI, and G:F decreased linearly with age (P < 0.01). Hot carcass weight, dressing percent, and fat thickness decreased linearly with age (P < 0.03); yield grade decreased and carcass maturity attributes increased linearly with age (P < 0.02). Performance and intake differences resulted in linear increases in total cost of gain (P < 0.01) and breakeven price (P = 0.03) with increasing age. These data indicate advantages to more aggressive feeding management strategies for culled beef cows, although maximal intake may be achieved with higher-roughage diets. Despite management effects, an increase in market price above purchase price may be required for intensive feeding of culled beef cows to be a profitable enterprise.
Carcass characteristics, meat quality and nutritional value of horsemeat: a review.
Lorenzo, José M; Sarriés, María Victoria; Tateo, Alessandra; Polidori, Paolo; Franco, Daniel; Lanza, Massimiliano
2014-04-01
Meat has exerted a crucial role in human evolution and is an important component of a healthy and well balanced diet due to its nutritional richness. The aim of the present review was to shed light on the nutritional composition of horsemeat and their benefits for human health. One of the reasons for such interest was the occurrence, in Europe several years ago, of dioxin, Bovine Encephalopathy and foot-and-mouth disease problems in farm animals. Therefore, consumers began to look for alternative red meats from other non-traditional species. There is no carcass classification system on horses designated to meat consumption. It would be advisable to standardize the equine meat market to reduce variations that may reflect differences in meat quality. The nutritional composition of horsemeat by comparison with pork, beef or poultry is characterized by low levels of fat and cholesterol (about 20% less), relatively high concentrations of n-3 fatty acids and heme iron indicating that its consumption may be beneficial for health. Therefore, horsemeat may supplement the meat market with good quality products, although as in other dietary components moderation is advisable. Copyright © 2013 Elsevier Ltd. All rights reserved.
Sousa, Dannylo Oliveira; Mesquita, Bruno de Sousa; Pires, Alexandre Vaz; Santana, Miguel Henrique de Almeida; Silva, Luis Felipe Prada
2017-10-01
The objective was to evaluate effects of neutral detergent fibre (NDF) digestibility and level of fresh sugarcane on intake, body fatness, carcass characteristics, and rumen kinetics and fermentation of beef cattle. Forty-eight Nellore young bulls were used in a complete randomized block design with a 2 × 2 factorial arrangement of treatments. Eight rumen-cannulated Nellore steers were used in a replicated 4 × 4 Latin square design. Two sugarcane genotypes divergent for stalk NDF digestibility (NDFD) were used. Experimental diets were formulated with 20 or 40% of sugarcane on a dry matter (DM) basis. High-NDFD genotype associated with the lower level of roughage in the diet promoted greater DM intake, resulting in greater body gain. Sugarcane with high-NDFD increased final body weight, hot carcass weight, and back-fat thickness. Animals receiving the genotype with high NDFD had greater rump-fat thickness only with 40% sugarcane in the diet. Animals receiving the low-NDFD genotype at 20% of the diet had lower NDF passage rate. Rumen pH was greater for diets with greater NDF content. There was greater proportion of butyrate in the rumen of animals receiving diets with greater NDF content. In conclusion, high-NDFD sugarcane increased final body and carcass weight, HCW, and fat thickness. When associated with lower inclusion of roughage in the diet, it can also increase DM intake and body weight gain of beef cattle.
2. Photographic copy of photograph dated 1941; Gerald Young, Chicago, ...
2. Photographic copy of photograph dated 1941; Gerald Young, Chicago, photographer; Original in Rath collection at Grout Museum, Waterloo, Iowa; Filed under: Rath Parking Company, Box 5; REMOVING HIDES ON THE FLOOR IN OLD BEEF HOUSE; SHARPENED PRITCH STICKS SET INTO DEEP GROOVES ON THE FLOOR PLATES HELD CARCASSES IN POSITION FOR SKINNING - Rath Packing Company, Cooler Building-1929 Beef House, Sycamore Street between Elm & Eighteenth Streets, Waterloo, Black Hawk County, IA
Yang, Xianqin; Tran, Frances; Youssef, Mohamed K; Gill, Colin O
2015-07-01
The possible origin of Escherichia coli found on cuts and trimmings in the breaking facility of a beef packing plant was examined using multiple-locus variable-number tandem repeat analysis. Coliforms and E. coli were enumerated in samples obtained from 160 carcasses that would enter the breaking facility when work commenced and after each of the three production breaks throughout the day, from the conveyor belt before work and after each break, and from cuts and trimmings when work commenced and after each break. Most samples yielded no E. coli, irrespective of the surface types. E. coli was recovered from 7 (<5%) carcasses, at numbers mostly ≤1.0 log CFU/160,000 cm(2). The log total numbers of E. coli recovered from the conveyor belt, cuts, and trimmings were mostly between 1 and 2 log CFU/80,000 cm(2). A total of 554 E. coli isolates were recovered. Multiple-locus variable-number tandem repeat analysis of 327 selected isolates identified 80 distinct genotypes, with 37 (46%) each containing one isolate. However, 28% of the isolates were of genotypes that were recovered from more than one sampling day. Of the 80 genotypes, 65 and 2% were found in one or all four sampling periods throughout the day. However, they represented 23 and 14% of the isolates, respectively. Of the genotypes identified for each surface type, at least one contained ≥9 isolates. No unique genotypes were associated with carcasses, but 10, 17, and 19 were uniquely associated with cuts, trimmings, and the belt, respectively. Of the isolates recovered from cuts, 49, 3, and 19% were of genotypes that were found among isolates recovered from the belt, carcasses, or both the belt and carcasses, respectively. A similar composition was found for isolates recovered from trimmings. These findings show that the E. coli found on cuts and trimmings at this beef packing plant mainly originated from the conveyor belt and that small number of E. coli strains survived the daily cleaning and sanitation process, thus persisting in the plant.
Patterns of chemical residues detected in US beef carcasses between 1991 and 1993.
Gibbons, S N; Kaneene, J B; Lloyd, J W
1996-08-01
A study of data from 12 states in the Food Safety Inspection Service's Residue Violation Information System was conducted to describe patterns of violative chemical residues in US beef during 1991, 1992, and 1993. In 1991, 3,249 violative residues were found in 2,734 carcasses in the 12 states included in the study. In 1992, 3,132 violative residues were found in 2,813 carcasses, and in 1993, 2,317 violative residues were found in 2,051 carcasses. During each of the 3 years, the Calf Antibiotic and Sulfonamide Test and Swab Test On Premises projects detected most of the violative residues, and producers/independent growers and dairy farms were recorded as the responsible sources for most of the violations. Also, most of the animals found to have violative residues were bob calves and culled cows. In bob calves, neomycin was the most frequently identified violative chemical, followed by tetracycline, gentamicin, oxytetracycline, and penicillin. In culled cows, penicillin was the most frequently identified violative chemical and was the chemical most frequently found in combination with other chemicals in cows with multiple violative residues. Distribution patterns of violative chemical residues by slaughter class and residue type varied among the 5 Food Safety Inspection Service regions. These specific regional characteristics support the need for customized intervention, education, assessment, and prevention programs.
Bali Cattle Carcass Characteristic of Different Butt Shape Condition
NASA Astrophysics Data System (ADS)
Hafid, H.; Nuraini; Inderawati; Kurniawan, W.
2018-02-01
Carcass was main product on cattle slaughtering which contain beef for human consumption and it has high nutritional and economical value. Carcass production on cattle has been influenced by several factors, such as cattle breed, feed, and body conformation. Cattle Butt Shape was one of part cattle body conformation which allegedly has have positive correlation on produced carcass. This research was aimed to evaluate Butt Shape condition influenced on Bali cattle carcass characteristic. The research was using Bali cattle which slaughter in Kendari Slaughtering House (Rumah Potong Hewan/RPH - Kendari). The observation includes weighing, and measuring parts of carcass was conducted on 60 heads of Halal process slaughtered Bali cattle which traditionally maintained. The research parameters were carcass productivity parameters i.e: slaughtering weight, carcass weight and length, leg length and circumstances. Obtained data were analyzed using Complete Randomized Design and post hoc analyzed using Least Significant Different if have any influence. The research result showed that cattle Butt Shape condition have significant (p<0, 05) influence on all Bali cattle carcass productivity parameters. Butt shape with B category was result the best carcass productivity compare the others, while C category was better than D. It can be concluded that body and carcass weight were linearly influenced by cattle butt shape.
Bonny, S P F; Pethick, D W; Legrand, I; Wierzbicki, J; Allen, P; Farmer, L J; Polkinghorne, R J; Hocquette, J-F; Gardner, G E
2016-04-01
Ossification score and animal age are both used as proxies for maturity-related collagen crosslinking and consequently decreases in beef tenderness. Ossification score is strongly influenced by the hormonal status of the animal and may therefore better reflect physiological maturity and consequently eating quality. As part of a broader cross-European study, local consumers scored 18 different muscle types cooked in three ways from 482 carcasses with ages ranging from 590 to 6135 days and ossification scores ranging from 110 to 590. The data were studied across three different maturity ranges; the complete range of maturities, a lesser range and a more mature range. The lesser maturity group consisted of carcasses having either an ossification score of 200 or less or an age of 987 days or less with the remainder in the greater maturity group. The three different maturity ranges were analysed separately with a linear mixed effects model. Across all the data, and for the greater maturity group, animal age had a greater magnitude of effect on eating quality than ossification score. This is likely due to a loss of sensitivity in mature carcasses where ossification approached and even reached the maximum value. In contrast, age had no relationship with eating quality for the lesser maturity group, leaving ossification score as the more appropriate measure. Therefore ossification score is more appropriate for most commercial beef carcasses, however it is inadequate for carcasses with greater maturity such as cull cows. Both measures may therefore be required in models to predict eating quality over populations with a wide range in maturity.
Basarab, John; Baron, Vern; López-Campos, Óscar; Aalhus, Jennifer; Haugen-Kozyra, Karen; Okine, Erasmus
2012-01-01
Simple Summary A spring calving herd (~350 beef cows) over two production cycles was used to compare the whole-farm greenhouse gas (GHG) emissions among calf-fed vs. yearling-fed production systems, with and without growth implants. Farm GHG emissions initially included enteric CH4, manure CH4 and N2O, cropping N2O, and energy use CO2. The carbon footprint ranged from 19.9–22.5 kg CO2e per kg carcass weight. Including soil organic carbon loss from annual cropping and carbon sequestration from perennial pastures and haylands further reduced the carbon footprint by 11–16%. The carbon footprint of beef was reduced by growth promotants (4.9–5.1%) and by calf-fed beef production (6.3–7.5%). Abstract A spring calving herd consisting of about 350 beef cows, 14–16 breeding bulls, 60 replacement heifers and 112 steers were used to compare the whole-farm GHG emissions among calf-fed vs. yearling-fed production systems with and without growth implants. Carbon footprint ranged from 11.63 to 13.22 kg CO2e per kg live weight (19.87–22.52 kg CO2e per kg carcass weight). Enteric CH4 was the largest source of GHG emissions (53–54%), followed by manure N2O (20–22%), cropping N2O (11%), energy use CO2 (9–9.5%), and manure CH4 (4–6%). Beef cow accounted for 77% and 58% of the GHG emissions in the calf-fed and yearling-fed. Feeders accounted for the second highest GHG emissions (15% calf-fed; 35–36% yearling-fed). Implants reduced the carbon footprint by 4.9–5.1% compared with hormone-free. Calf-fed reduced the carbon footprint by 6.3–7.5% compared with yearling-fed. When expressed as kg CO2e per kg carcass weight per year the carbon footprint of calf-fed production was 73.9–76.1% lower than yearling-fed production, and calf-fed implanted was 85% lower than hormone-free yearling-fed. Reducing GHG emissions from beef production may be accomplished by improving the feed efficiency of the cow herd, decreasing the days on low quality feeds, and reducing the age at harvest of youthful cattle. PMID:26486917
Apple, J K; Davis, J C; Stephenson, J; Hankins, J E; Davis, J R; Beaty, S L
1999-10-01
Mature beef cows (n = 83) were slaughtered to measure the influence of body condition score (BCS) on carcass characteristics and subprimal yields. All cows were weighed and assigned BCS, based on a 9-point scale, 24 h before slaughter. Cows were slaughtered, and, after a 48-h chilling period, quality and yield grade data were collected on the left side of each carcass. The right side was quartered, fabricated into primal cuts, and weighed. Each primal cut was further processed into boneless subprimal cuts, minor cuts, lean trim, fat, and bone. Cuts were progressively trimmed to 6.4 and 0 mm of external and visible seam fat. Weights were recorded at all stages of fabrication, and subprimal yields were calculated as a percentage of the chilled carcass weight. Live weight, carcass weight, dressing percentage, fat thickness, longissimus muscle area, muscle:bone ratio, and numerical yield grade increased linearly (P = .0001) and predicted cutability and actual muscle-to-fat ratio decreased linearly (P = .0001) as BCS increased from 2 to 8. Carcasses from BCS-8 cows had the most (P<.05) marbling. The percentage of carcasses grading U.S. Utility, or higher, was 16.7, 20.0, 63.6, 43.3, 73.3, 100.0, and 100.0% for cows assigned a BCS of 2, 3, 4, 5, 6, 7, and 8, respectively. At 6.4 mm of fat trim, carcasses from BCS-5 cows had higher (P<.05) shoulder clod yields than carcasses from cows having a BCS of 6, 7, and 8. Carcasses of BCS-2 cows had lower (P<.05) strip loin yields than carcasses from BCS-3, 4, 5, 6, and 7 cows. Top sirloin butt yields were higher (P<.05) for carcasses of BCS-2, 3, 4, and 5 cows than those of BCS-6, 7, or 8 cows. Carcasses from BCS-7 and 8 cows had lower (P<.05) tenderloin and inside round yields than carcasses of BCS-5, or less, cows. At both fat-trim levels, carcasses from BCS-5 cows had higher (P<.05) eye of round yields than cows assigned BCS of 2, 7, or 8. When subprimal cuts were trimmed to 6.4 mm of visible fat, carcasses from BCS-5 cows had higher (P<.05) total lean product yields than cows assigned a BCS of 2, 4, 7, and 8. Regardless of fat trim, total fat yields increased (P = .0001) and total bone yields decreased (P = .0001) linearly as BCS increased from 2 to 8. Although carcasses from BCS-5 and 6 cows had the highest yields of lean product, cattle producers and packers may benefit most by marketing and(or) purchasing BCS-6 cows because a higher percentage of their carcasses had quality characteristics deemed desirable for fabrication into boneless subprimal cuts.
Effects of stepwise dry/wet-aging and freezing on meat quality of beef loins.
Kim, Yuan H Brad; Meyers, Brandon; Kim, Hyun-Wook; Liceaga, Andrea M; Lemenager, Ronald P
2017-01-01
The objective of this study was to evaluate the effects of stepwise dry/wet-aging and freezing method on quality attributes of beef loins. Paired loins (M. Longissimus lumborum) from eight carcasses were assigned to either stepwise dry/wet-aging (carcass dry-aging for 10days then further wet-aging for 7days in vacuum bags) or carcass dry-aging only for 17days. Then, each loin was divided into three sections for freezing (never-frozen, blast or cryogenic freezing). Stepwise dry/wet-aged loin had lower purge/drip loss and shear force than conventionally dry-aged loin (P<0.05), but similar color and sensory characteristics (P>0.05). The cryogenic freezing resulted in a significant decrease in shear force values and a significant improvement in water-holding capacity (WHC). These findings indicate that the stepwise dry/wet-aging coupled with cryogenic freezing could provide beneficial impacts to the local meat industry by providing equivalent quality attributes as conventional dry-aging and improving WHC of frozen/thawed meat, while reducing the time needed for dry-aging. Copyright © 2016 Elsevier Ltd. All rights reserved.
Genetic Parameter Estimates of Carcass Traits under National Scale Breeding Scheme for Beef Cattle
Do, ChangHee; Park, ByungHo; Kim, SiDong; Choi, TaeJung; Yang, BohSuk; Park, SuBong; Song, HyungJun
2016-01-01
Carcass and price traits of 72,969 Hanwoo cows, bulls and steers aged 16 to 80 months at slaughter collected from 2002 to 2013 at 75 beef packing plants in Korea were analyzed to determine heritability, correlation and breeding value using the Multi-Trait restricted maximum likelihood (REML) animal model procedure. The traits included carcass measurements, scores and grades at 24 h postmortem and bid prices at auction. Relatively high heritability was found for maturity (0.41±0.031), while moderate heritability estimates were obtained for backfat thickness (0.20±0.018), longissimus muscle (LM) area (0.23±0.020), carcass weight (0.28±0.019), yield index (0.20±0.018), yield grade (0.16±0.017), marbling (0.28±0.021), texture (0.14±0.016), quality grade (0.26±0.016) and price/kg (0.24±0.025). Relatively low heritability estimates were observed for meat color (0.06±0.013) and fat color (0.06±0.012). Heritability estimates for most traits were lower than those in the literature. Genetic correlations of carcass measurements with characteristic scores or quality grade of carcass ranged from −0.27 to +0.21. Genetic correlations of yield grade with backfat thickness, LM area and carcass weight were 0.91, −0.43, and −0.09, respectively. Genetic correlations of quality grade with scores of marbling, meat color, fat color and texture were −0.99, 0.48, 0.47, and 0.98, respectively. Genetic correlations of price/kg with LM area, carcass weight, marbling, meat color, texture and maturity were 0.57, 0.64, 0.76, −0.41, −0.79, and −0.42, respectively. Genetic correlations of carcass price with LM area, carcass weight, marbling and texture were 0.61, 0.57, 0.64, and −0.73, respectively, with standard errors ranging from ±0.047 to ±0.058. The mean carcass weight breeding values increased by more than 8 kg, whereas the mean marbling scores decreased by approximately 0.2 from 2000 through 2009. Overall, the results suggest that genetic improvement of productivity and carcass quality could be obtained under the national scale breeding scheme of Korea for Hanwoo and that continuous efforts to improve the breeding scheme should be made to increase genetic progress. PMID:27004809
Occurrence of foodborne bacteria in Alberta feedlots.
Van Donkersgoed, Joyce; Bohaychuk, Valerie; Besser, Thomas; Song, Xin-Ming; Wagner, Bruce; Hancock, Dale; Renter, David; Dargatz, David
2009-02-01
The occurrence of generic Escherichia coli, E. coli O157, Salmonella, and Campylobacter in cattle manure, beef carcasses, catch basin water, and soils receiving manure application was determined in 21 Alberta feedlots. In cattle manure, generic E. coli (98%, 2069/2100) and Campylobacter (76%, 1590/2100) were frequently detected; E. coli O157 (7%, 143/2100) and Salmonella (1%, 20/2100) were less frequently detected. Samples from beef carcasses in the cooler following Hazard Analysis Critical Control Point interventions yielded only 1 isolate each of generic E. coli and Campylobacter (1/1653) and no Salmonella (0/1653). Catch basin water specimens were positive for generic E. coli in both the spring (62%, 13/21) and the fall (52%, 11/21). Other bacteria were detected only in the spring water specimens, including E. coli O157 (29%, 6/21), Salmonella (5%, 1/21), and Campylobacter (52%, 11/21). Generic E. coli was frequently isolated from soil specimens (30%, 27/88), but E. coli O157 was not found in soil samples obtained in the spring and was only occasionally detected in the fall samples (9%, 3/32). Salmonella were occasionally found in the soil specimens collected in the spring (3%, 2/56), but not in the fall season (0/32). Campylobacter jejuni was frequent in cattle manure (66%, 1070/1623), but rare in carcass and environmental samples. E. coli O157 and Salmonella were rarely detected in cattle or the environment. Generic E. coli and Salmonella were rarely detected on carcasses.
Duffy, Geraldine; Burgess, Catherine M; Bolton, Declan J
2014-07-01
Verocytotoxigenic Escherichia coli (VTEC) are a significant foodborne public health hazard in Europe, where most human infections are associated with six serogroups (O157, O26, O103, O145, O111 and O104). With the exception of O104, these serogroups are associated with bovine animals and beef products. This paper reviews our current knowledge of VTEC in the beef chain focusing on transmission and the factors which impact on survival from the farm through transport, lairage, slaughter, dressing, processing and distribution, in the context of the European beef industry. It provides new information on beef farm and animal hide prevalence, distribution and virulence factors as well as pre-chilled carcass and ground beef prevalence, generated by the recently completed EU Framework research project, ProSafeBeef. In the concluding section, emerging issues and data gaps are addressed with a view to increasing our understanding of this pathogen and developing new thinking on detection and control. Copyright © 2014 Elsevier Ltd. All rights reserved.
Castillo, A; Lucia, L M; Goodson, K J; Savell, J W; Acuff, G R
1998-07-01
Cleaning treatments, such as high-pressure water wash at 35 degrees C or trim, alone and combined with sanitizing treatments, such as hot water (95 degrees C at the source), warm (55 degrees C) 2% lactic acid spray, and combinations of these two sanitizing methods, were compared for their effectiveness in reducing inoculated numbers (5.0 to 6.0 log CFU/cm2) of Salmonella typhimurium, Escherichia coli O157:H7, aerobic plate counts, Enterobacteriaceae, total coliforms, thermotolerant coliforms, and generic E. coli on hot beef carcass surface areas in a model carcass spray cabinet. Log reductions in numbers of all tested organisms by water wash or trim alone were significantly smaller than the log reductions obtained by the different combined treatments. Regardless of the cleaning treatment (water wash or trim) or surface area, the range for mean log reductions by hot water was from 4.0 to > 4.8 log CFU/cm2, by lactic acid spray was from 4.6 to > 4.9 log CFU/cm2, by hot water followed by lactic acid spray was from 4.5 to > 4.9 log CFU/cm2, and by lactic acid spray followed by hot water was from 4.4 to > 4.6 log CFU/cm2, for S. typhimurium and E. coli O157:H7. Identical reductions were obtained for thermotolerant coliforms and generic E. coli. No differences in bacterial reductions were observed for different carcass surface regions. Water wash and trim treatments caused spreading of the contamination to other areas of the carcass surface while providing an overall reduction in fecal or pathogenic contamination on carcass surface areas. This relocated contamination after either water wash or trim was most effectively reduced by following with hot water and then lactic acid spray. This combined treatment yielded 0% positive samples for S. typhimurium, E. coli O157:H7, thermotolerant coliforms, and generic E. coli on areas outside the inoculated areas, whereas percent positive samples after applying other combined treatments ranged from 22 to 44% for S. typhimurium, 0 to 44% for E. coli O157:H7, and 11 to 33% for both thermotolerant coliforms and generic E. coli. From data collected in this study, it is possible to choose an effective, inexpensive treatment to reduce bacterial contamination on beef carcasses. In addition, the similar reduction rates of total coliforms, thermotolerant coliforms, or generic E. coli may be useful in identifying an indicator to verify the effectiveness of the selected treatment as a critical control point in a Hazard Analysis and Critical Control Point program.
Soulat, J; Picard, B; Léger, S; Monteils, V
2018-06-01
In this study, four prediction models were developed by logistic regression using individual data from 96 heifers. Carcass and sensory rectus abdominis quality clusters were identified then predicted using the rearing factors data. The obtained models from rearing factors applied during the fattening period were compared to those characterising the heifers' whole life. The highest prediction power of carcass and meat quality clusters were obtained from the models considering the whole life, with success rates of 62.8% and 54.9%, respectively. Rearing factors applied during both pre-weaning and fattening periods influenced carcass and meat quality. According to models, carcass traits were improved when heifer's mother was older for first calving, calves ingested concentrates during pasture preceding weaning and heifers were slaughtered older. Meat traits were improved by the genetic of heifers' parents (i.e., calving ease and early muscularity) and when heifers were slaughtered older. A management of carcass and meat quality traits is possible at different periods of the heifers' life. Copyright © 2018 Elsevier Ltd. All rights reserved.
Sutmoller, P
2001-12-01
Risk mitigation measures to reduce the risks associated with importing beef from countries affected by foot and mouth disease (FMD) consist of controls at the farm of origin, inspection of slaughterhouses and maturation and deboning of carcasses. This assessment evaluates the effect of these measures on the mitigation of the risks presented by meat from cattle with FMD, for each of the different stages of the disease. The four disease stages considered are the incubation period, the period of clinical signs, convalescence and the carrier stage. Efficient animal health systems, disease surveillance, and ante-mortem and post-mortem inspection of all cattle effectively reduce the risk of FMD transmission from cattle slaughtered during the period of clinical signs or convalescence. These measures fail if the cattle are slaughtered during the incubation period, because of the absence of clinical signs. Cattle in this stage of the infection are likely to be viraemic, with FMD virus present in the skeletal muscles. Maturation of the carcasses of viraemic cattle reduces the risk of virus presence in the beef. In addition, deboning and removal of the principal lymph nodes and large blood vessels eliminate a source of FMD contamination of the beef. However, the slaughter of viraemic cattle creates an additional hazard of gross environmental viral contamination of the slaughterhouse facilities. Therefore, the maturation process may create a false sense of security, and the emphasis should instead be placed on disease surveillance within the infected zone and on the farms of origin, to prevent the slaughter of herds that are incubating FMD. Cattle slaughtered during the carrier stage do not pose a risk for the international beef trade.
Real-time PCR detection of Brucella spp. DNA in lesions and viscera of bovine carcasses.
Sola, Marília Cristina; da Veiga Jardim, Eurione A G; de Freitas, Marcius Ribeiro; de Mesquita, Albenones José
2014-09-01
This study reports a real-time PCR assay for the detection of Brucella spp. associated with the FTA® Elute method in lesions observed during sanitary inspections in beef slaughter. Of the total 276 samples, 78 (28.3%) tested positive and 198 (71.7%) negative for Brucella spp. The real-time PCR technique associated with the FTA® Elute method proved to be an important tool for the diagnosis, judgment about and disposal of carcasses and viscera of slaughtered animals. Copyright © 2014 Elsevier B.V. All rights reserved.
Quantifying the aging response and nutrient composition for muscles of the beef round.
Dixon, C L; Woerner, D R; Tokach, R J; Chapman, P L; Engle, T E; Tatum, J D; Belk, K E
2012-03-01
The objective of this study was to determine the optimal postmortem aging period and nutrient composition for Beef Value Cuts of the round. Forty USDA Select and 40 Premium USDA Choice beef carcasses were selected from a commercial beef packing plant in Colorado over a 12-wk period. The bottom and inside rounds were collected from both sides of each carcass for further fabrication into the following muscles: adductor, gastrocnemius, gracilis, pectineus, and superficial digital flexor. Each pair of muscles was cut into 7 steaks and randomly assigned to 1 of the following aging periods: 2, 4, 6, 10, 14, 21, and 28 d, and placed in refrigerated storage (2°C, never frozen). Upon completion of the designated aging period, steaks were removed from storage, cooked to a peak internal temperature of 72°C, and evaluated using Warner-Bratzler shear force (WBSF). A 2-way interaction was detected (P < 0.05) between individual muscle and postmortem aging period. The WBSF of all muscles except the superficial digital flexor decreased with increased time of postmortem aging. Quality grade did not affect (P > 0.05) WBSF values for the adductor, gastrocnemius, pectineus, and superficial digital flexor muscles. Exponential decay models were used to predict the change in WBSF from 2 to 28 d postmortem (aging response). The adductor, gastrocnemius, Select gracilis, Premium Choice gracilis, and pectineus required 21, 14, 23, 23, and 25 d, respectively, to complete the majority of the aging response. To determine the nutrient composition of the adductor, gastrocnemius, gracilis, pectineus, semimembranosus, and superficial digital flexor, bottom and inside rounds were collected from 10 USDA Select and 10 Premium USDA Choice carcasses and fabricated into the respective muscles, cut into 2.54-cm cubes, frozen (-20°C), and then homogenized. The adductor, gracilis, pectineus, semimembranosus, and superficial digital flexor were analyzed for DM, moisture, CP, and ash percentages. All muscles were evaluated for total lipid, fatty acid, and cholesterol composition. When quality grades were combined, all muscles fell into the extra lean or lean categories specified by USDA guidelines. Results of this study illustrate the potential for Beef Value Cuts of the round to be sold in food service operations and retail stores with marketing emphasis being placed on the exceptional leanness and acceptable tenderness of these cuts.
Cutter, C N; Siragusa, G R
1996-07-01
Lean and adipose beef carcass tissues inoculated with Brochothrix thermosphacta (BT) (approx. 4.50 log10 cfu cm-2) were left untreated (U) or treated with 100 micrograms ml-1 nisin (N), calcium alginate (A) or 100 micrograms ml-1 nisin immobilized in a calcium alginate gel (AN). Tissue samples were refrigerated after treatments and bacterial populations and nisin activity were determined at 0, 1, 2 and 7 d. U, A and N treatments of lean and adipose tissues did not suppress bacterial growth ( > 6 log10 cfu cm-2 by day 7) while treatments of lean and adipose tissues with AN suppressed bacteria ( > 2.42 log10 cfu cm-2 by day 7). Bacteriocin titres from both tissues were higher in AN vs N samples after the 7 d incubation. This study demonstrates that immobilization of nisin in a gel may be a more effective delivery system of a bacteriocin to the carcass surface than direct application.
Agbeniga, Babatunde; Webb, Edward C
2018-03-01
The effects of beef carcass weight on muscle pH/temperature profile and selected meat quality attributes were evaluated. Twenty-six carcasses from light (≤260kg, n=15) and heavy (≥290kg, n=11) feedlot steers were randomly allocated and stimulated with low voltage electrical stimulation (LVES) for 30s at 7min post-mortem (pm). Quality evaluations were carried out on samples from the Longissimus et lumborum (LL) muscle from the left side of each carcass. Heavier carcasses showed faster pH decline and slower (P<0.05) temperature decline at 45min, 3, 6, 12 and 24h pm. Heavier carcasses passed through the heat shortening window (i.e. at pH6, temperature was >35°C) but there was no sign of sarcomere shortening in any carcass. Significantly lower (P<0.05) shear force values were recorded in the heavier carcasses at 3days pm but at 14days pm, heavier carcasses had numerically lower but not significantly different shear force. Heavier carcasses produced numerically higher but not significant (P>0.05) drip loss at 3 and 14days pm as well as higher L* (meat lightness) (P<0.05) and C* (chroma) (P<0.05) values early (2days) pm. However, at 14days pm, there were no significant differences between the light and heavy carcasses in terms of L* and C*. No significant difference was observed between heavy and light carcasses in terms of H* at 2 and 14days pm. The study showed that heavier carcasses which favor slaughter house pricing can be produced and processed alongside lighter carcasses without significant detrimental effects on meat quality by using low voltage electrical stimulation (LVES). Copyright © 2017 Elsevier Ltd. All rights reserved.
Historical Overview of the Effect of β-Adrenergic Agonists on Beef Cattle Production
Johnson, Bradley J.; Smith, Stephen B.; Chung, Ki Yong
2014-01-01
Postnatal muscle hypertrophy of beef cattle is the result of enhanced myofibrillar protein synthesis and reduced protein turnover. Skeletal muscle hypertrophy has been studied in cattle fed β-adrenergic agonists (β-AA), which are receptor-mediated enhancers of protein synthesis and inhibitors of protein degradation. Feeding β-AA to beef cattle increases longissimus muscle cross-sectional area 6% to 40% compared to non-treated cattle. The β-AA have been reported to improve live animal performance, including average daily gain, feed efficiency, hot carcass weight, and dressing percentage. Treatment with β-AA increased mRNA concentration of the β2 or β1-adrenergic receptor and myosin heavy chain IIX in bovine skeletal muscle tissue. This review will examine the effects of skeletal muscle and adipose development with β-AA, and will interpret how the use of β-AA affects performance, body composition, and growth in beef cattle. PMID:25050012
SAS molecular tests Salmonella detection kit. Performance tested method 021202.
Bapanpally, Chandra; Montier, Laura; Khan, Shah; Kasra, Akif; Brunelle, Sharon L
2014-01-01
The SAS Molecular tests Salmonella Detection method, a Loop-mediated Isothermal Amplification method, performed as well as or better than the U.S. Department of Agriculture-Food Safety Inspection Service Microbiology Laboratory Guidebook and the U.S. Food and Drug Administration Bacteriological Analytical Manual reference methods for ground beef, beef trim, ground turkey, chicken carcass rinses, bagged mixed lettuce, and fresh spinach. The ground beef (30% fat, 25 g test portion), poultry matrixes and leafy greens were validated in a 6-7 h enrichment, and ground beef (30% fat, 375 g composite test portion) and beef trim (375 g composite test portion) were validated in a 16-20 h enrichment. The method performance for meat and leafy green matrixes was shown to be acceptable under conditions of co-enrichment with Escherichia coli 0157. Thus, after a short 6-7 h co-enrichment step, ground beef, beef trim, lettuce, and spinach can be tested for both Salmonella and E. coli O157. Inclusivity and exclusivity testing revealed no false negatives and no false positives among the 100 Salmonella serovars and 30 non-Salmonella species examined. The method was shown to be robust when enrichment time, DNA extract hold time, and DNA volume were varied.
Effects of dry-aging on meat quality attributes and metabolite profiles of beef loins.
Kim, Yuan H Brad; Kemp, Robert; Samuelsson, Linda M
2016-01-01
The objectives of this study were to evaluate different dry-aging regimes and their impacts on quality attributes and metabolite profiles of beef loins. Thirty loins (M. longissimus lumborum) from 15 beef carcasses at 2 days post-mortem were obtained. Each loin was cut in half yielding 60 sections, which were randomly assigned to six treatments including 4 dry-aging (2 temperatures (1 or 3°C) × 2 air-velocities (0.2 or 0.5 m/s)) and 2 wet-aging regimes for 3 weeks; n=10/treatment. The sensory panel found that dry-aged loins had better flavour and overall liking (P<0.05), but there were no differences in tenderness and juiciness. No differences in drip/cook-loss and colour were observed. Metabolite analysis showed that 7 metabolites, including several flavour precursors, were more abundant in the dry-aged beef compared to the wet-aged beef, which may contribute to the enhanced flavours of the dry-aged beef. Overall, dry-aging loins at 3°C with 0.2m/s resulted in the greatest improvement in beef palatability. Copyright © 2015 Elsevier Ltd. All rights reserved.
Reid, Rachael; Fanning, Séamus; Whyte, Paul; Kerry, Joe; Bolton, Declan
2017-04-01
This study investigated the fate of Salmonella Typhimurium and Escherichia coli O157 on hot boned versus conventionally chilled beef. Beef samples were individually inoculated with S. Typhimurium ATCC 14028, S. Typhimurium 844, E. coli O157 EDL 933 or E. coli T13. Half the samples were subject to the same time-temperature chilling profile used for conventionally chilling beef carcasses while the other half was subject to hot boned conditions. The surface pH (5.5) and a w (0.95 to 0.97) were stable. S. Typhimurium and E. coli O157 counts, which decreased by up to 1.0 and 1.5log 10 cfucm -2 , respectively, were statistically similar (P>0.05), regardless of the chilling regime applied, with the exception of E. coli O157 EDL 933, where the counts on hot boned beef were significantly (P<0.05) higher. It was concluded that any decrease in pathogenic bacteria during beef chilling may be significantly (P<0.05) less for hot boned beef depending on the bacterial strain. Hot boning may therefore result in an increased risk to the consumer. Copyright © 2016 Elsevier Ltd. All rights reserved.
USDA-ARS?s Scientific Manuscript database
Objectives: Objectives of this study were to 1) evaluate growth performance and carcass characteristics, and 2) determine environmental and economic impacts of cattle raised with different levels of growth promoting technology. Materials and Methods: Angus' Simmental,and crossbred steer calves (n =...
Schmitz, Angela N; Walter, Lee-Anne J; Nichols, Wade T; Hutcheson, John P; Lawrence, Ty E
2018-06-04
An experiment was conducted to evaluate the fabrication yields of carcasses from beef steers supplemented zilpaterol hydrochloride (ZH) and fed at maintenance (MA) or ad libitum (AB) intake levels. Beef steers (n = 56) from a common sire were blocked (n = 28 per block) by terminal growth implant and sorted into pairs by BW. Four pairs (n = 8) were harvested on day 0; the remaining 24 pairs (n = 48) were assigned to a dietary intake level (MA or AB) and days on feed (28 or 56 d). Within pairs of MA or AB intakes, steers harvested on day 56 were randomly assigned to supplementation of ZH (90 mg·d-1 per steer) for 20 d followed by a withdrawal period of 4 d or control (C). Steers (BW = 603.5 ± 48.1 kg) were harvested at a commercial processing facility. After a 24-h chill period, standard USDA grading procedures were used to derive a calculated yield grade and quality grade. Following grading, left carcass sides were transported to the West Texas A&M University Meat Laboratory for fabrication. Each side was fabricated into subprimals to determine individual red meat yield (RMY), trimmable fat yield (TFY), and bone yield (BY). A mixed model was used for analysis; fixed effects included treatment combinations and random effects included block and pairs. Single df contrasts tested day 0 vs. 28, day 0 vs. 56, day 28 vs. 56, MA vs. AB, and C vs. ZH. Yield of chuck eye roll differed (P = 0.05) by days on feed (0 d = 4.14, 28 d = 4.11, 56 d = 4.55%). Similarly, eye of round yield was impacted (P = 0.02) by days on feed (0 d = 1.51, 28 d = 1.37, 56 d = 1.36%). Additionally, brisket yield was altered (P < 0.01) by days on feed (0 d = 4.08, 28 d = 3.56, 56 d = 3.48%) and treatment (C = 3.34, ZH = 3.61%). For remaining subprimals, no differences (P ≥ 0.15) were detected. Furthermore, results indicated that RMY tended (P = 0.07) to differ by treatment (C = 61.35, ZH = 63.67%). Comparatively, TFY was impacted (P = 0.04) by intake (MA = 20.44, AB = 23.33%). Results from this study indicate that a MA intake level during the last 56 d of the finishing period concurrent with ZH supplementation impacts subprimal yields as well as carcass RMY and TFY of beef steers.
Van Donkersgoed, J; Jewison, G; Mann, M; Cherry, B; Altwasser, B; Lower, R; Wiggins, K; Dejonge, R; Thorlakson, B; Moss, E; Mills, C; Grogan, H
1997-04-01
A study was conducted in 4 Canadian processing plants in 1995-96 to determine the prevalence of quality defects in Canadian cattle. One percent of the annual number of cattle processed in Canada were evaluated on the processing floor and 0.1% were graded in the cooler. Brands were observed on 37% and multiple brands on 6% of the cattle. Forty percent of the cattle had horns, 20% of which were scurs, 33% were stubs, 10% were tipped, and 37% were full length. Tag (mud and manure on the hide) was observed on 34% of the cattle. Bruises were found on 78% of the carcasses, 81% of which were minor in severity. Fifteen percent of the bruises were located on the round, 29% on the loin, 40% on the rib, 16% on the chuck, and 0.02% on the brisket. Grubs were observed in 0.02% of the steers, and injection sites were observed in 1.3% of whole hanging carcasses. Seventy percent of the livers were passed for human food and 14% for pet food; 16% were condemned. Approximately 71% of the liver condemnations were due to liver abscesses. Four percent of the heads, 6% of the tongues, and 0.2% of whole carcasses were condemned. The pregnancy rate in female cattle was approximately 6.7%. The average hot carcass weight was 357 kg (s = 40) in steers, 325 kg (s = 41) in heifers, 305 kg (s = 53) in cows, 388 kg (s = 62) in virgin bulls and 340 kg (s = 39) in mature bulls. The average ribeye area in all cattle was 84 cm2 (s = 12); range 29 cm2 to 128 cm2. Grade fat was highly variable and averaged 9 mm (s = 4) for steers and heifers, 6 mm (s = 6) for cows, 5 mm (s = 1) for virgin bulls, and 4 mm (s = 0.5) for mature bulls. The average lean meat yield was 59.7% in cattle (s = 3.4); range 39% to 67%. One percent of the carcasses were devoid of marbling, 1% were dark cutters, and 0.05% of the steer carcasses were staggy. Six percent of the carcasses had poor conformation, 3.7% were underfinished, and 0.7% were overfinished. Yellow fat was observed in 4% of the carcasses; 10% of carcasses were aged. Based on January 1996 prices, the economic analysis showed that the Canadian beef industry lost $70.52 per head or $189.6 million annually from quality nonconformities. Methods identified to reduce these nonconformities included improvements in management, animal identification, handling, genetic selection, marketing, grading, and information transfer.
Van Donkersgoed, J; Jewison, G; Mann, M; Cherry, B; Altwasser, B; Lower, R; Wiggins, K; Dejonge, R; Thorlakson, B; Moss, E; Mills, C; Grogan, H
1997-01-01
A study was conducted in 4 Canadian processing plants in 1995-96 to determine the prevalence of quality defects in Canadian cattle. One percent of the annual number of cattle processed in Canada were evaluated on the processing floor and 0.1% were graded in the cooler. Brands were observed on 37% and multiple brands on 6% of the cattle. Forty percent of the cattle had horns, 20% of which were scurs, 33% were stubs, 10% were tipped, and 37% were full length. Tag (mud and manure on the hide) was observed on 34% of the cattle. Bruises were found on 78% of the carcasses, 81% of which were minor in severity. Fifteen percent of the bruises were located on the round, 29% on the loin, 40% on the rib, 16% on the chuck, and 0.02% on the brisket. Grubs were observed in 0.02% of the steers, and injection sites were observed in 1.3% of whole hanging carcasses. Seventy percent of the livers were passed for human food and 14% for pet food; 16% were condemned. Approximately 71% of the liver condemnations were due to liver abscesses. Four percent of the heads, 6% of the tongues, and 0.2% of whole carcasses were condemned. The pregnancy rate in female cattle was approximately 6.7%. The average hot carcass weight was 357 kg (s = 40) in steers, 325 kg (s = 41) in heifers, 305 kg (s = 53) in cows, 388 kg (s = 62) in virgin bulls and 340 kg (s = 39) in mature bulls. The average ribeye area in all cattle was 84 cm2 (s = 12); range 29 cm2 to 128 cm2. Grade fat was highly variable and averaged 9 mm (s = 4) for steers and heifers, 6 mm (s = 6) for cows, 5 mm (s = 1) for virgin bulls, and 4 mm (s = 0.5) for mature bulls. The average lean meat yield was 59.7% in cattle (s = 3.4); range 39% to 67%. One percent of the carcasses were devoid of marbling, 1% were dark cutters, and 0.05% of the steer carcasses were staggy. Six percent of the carcasses had poor conformation, 3.7% were underfinished, and 0.7% were overfinished. Yellow fat was observed in 4% of the carcasses; 10% of carcasses were aged. Based on January 1996 prices, the economic analysis showed that the Canadian beef industry lost $70.52 per head or $189.6 million annually from quality nonconformities. Methods identified to reduce these nonconformities included improvements in management, animal identification, handling, genetic selection, marketing, grading, and information transfer. PMID:9105719
Effects of beef production system on animal performance and carcass characteristics.
Maxwell, C L; Krehbiel, C R; Wilson, B K; Johnson, B T; Bernhard, B C; O'Neill, C F; VanOverbeke, D L; Mafi, G G; Step, D L; Richards, C J
2014-12-01
The objective of this study was to evaluate conventional (CONV) and natural (NAT) beef production systems from annual pasture through finishing through grazing. Beef steers (n=180, initial BW=250±19 kg) were assigned randomly to 2 treatments in the pasture phase. Steers were implanted with 40 mg of trenbolone acetate (TBA), 8 mg estradiol, and 29 mg tylosin tartrate (CONV), or received no implant (NAT). Steers on the 2 treatments grazed wheat or cereal rye for 109 d. Conventional steers had an 18.5% improvement in ADG (1.22 vs. 1.03 kg/d, P<0.01) and a heavier final BW (385 vs. 366 kg, P<0.01) compared with NAT steers. Following the pasture phase, steers (n=160 steers, 5 steers/pen, 8 pens/treatment) were assigned to a 2×2 factorial in the feedlot phase. Production system (NAT vs. CONV) was maintained from the pasture phase, and the second factor was 7 vs. 12% low-quality roughage (DM basis, LOW vs. HIGH). During finishing, CONV steers were given 120 mg of TBA and 24 mg estradiol at processing, fed monensin and tylosin, and fed zilpaterol hydrochloride for the last 20 d of the experiment. There were no program×roughage level interactions (P>0.07). The CONV steers ate 6.9% more feed (11.8 vs. 11.0 kg/d, P<0.01), gained 28.4% faster (1.90 vs. 1.48 kg/d, P<0.01), and were 24.2% more efficient (0.164 vs. 0.132, P<0.01) compared with NAT steers. The LOW steers had greater G:F (0.153 vs. 0.144, P<0.01) compared with HIGH steers. There was a 28.3% improvement in estimated carcass weight gain (1.36 vs. 1.06 kg/d), 18.6% improvement in carcass efficiency (0.115 vs. 0.097, P<0.01), and 21.6% improvement (1.52 vs. 1.25 Mcal/kg, P<0.01) in calculated dietary NEg for CONV compared with NAT steers. Hot carcass weight was increased by 62 kg (424 vs. 362 kg, P<0.01) and LM area was increased by 16.9 cm2 (100.9 vs. 84.0 cm2, P<0.01), decreasing USDA yield grade (YG, 3.09 vs. 3.54, P<0.01) for CONV steers compared with NAT steers. Natural steers had a greater percentage of carcasses in the upper 2/3 of USDA Choice grade (48.7 vs. 18.7%, P<0.01), a greater percentage of YG 4 and 5 carcasses (25.4 vs. 9.3%, P<0.01), and a greater percentage of abscessed livers (39.6 vs. 10.5%, P<0.01) compared with CONV steers. The results show that CONV production results in more rapid and efficient production that resulted in heavier carcasses with superior YG and desirable quality grades with both roughage levels.
Two sampling techniques for game meat.
van der Merwe, Maretha; Jooste, Piet J; Hoffman, Louw C; Calitz, Frikkie J
2013-03-20
A study was conducted to compare the excision sampling technique used by the export market and the sampling technique preferred by European countries, namely the biotrace cattle and swine test. The measuring unit for the excision sampling was grams (g) and square centimetres (cm2) for the swabbing technique. The two techniques were compared after a pilot test was conducted on spiked approved beef carcasses (n = 12) that statistically proved the two measuring units correlated. The two sampling techniques were conducted on the same game carcasses (n = 13) and analyses performed for aerobic plate count (APC), Escherichia coli and Staphylococcus aureus, for both techniques. A more representative result was obtained by swabbing and no damage was caused to the carcass. Conversely, the excision technique yielded fewer organisms and caused minor damage to the carcass. The recovery ratio from the sampling technique improved 5.4 times for APC, 108.0 times for E. coli and 3.4 times for S. aureus over the results obtained from the excision technique. It was concluded that the sampling methods of excision and swabbing can be used to obtain bacterial profiles from both export and local carcasses and could be used to indicate whether game carcasses intended for the local market are possibly on par with game carcasses intended for the export market and therefore safe for human consumption.
Takeda, Kazuya; Uchida, Hiroshi; Inoue, Keiichi
2017-10-01
Correlations of calves' temperament with carcass traits were estimated to clarify the genetic relationships between them in Japanese Black cattle. The temperament records for 3128 calves during auction at a calf market were scored on a scale of 1 (calm) to 5 (nervous) as temperament score (TS), and the TS were divided into two groups (TSG): TS 1 and 2 comprised TSG 1, and 3 to 5 constituted TSG 2. Carcass data were obtained from 33 552 fattened cattle. A threshold animal model was used for analyzing the underlying liability for TSG, whereas a linear one was used for TS and carcass traits. The heritability estimates for TS and TSG were 0.12 and 0.11, respectively. On the other hand, moderate to high heritability estimates were obtained for carcass traits (0.40 to 0.68). The temperament scores were negatively correlated with carcass weight, rib thickness and subcutaneous fat thickness (-0.13 to -0.59). In contrast, weak to moderate positive correlations were found between the temperament scores and rib eye area or yield estimate (0.16 to 0.45). The temperament scores and beef marbling score had no correlation. These results showed that it is possible to improve temperament and carcass traits simultaneously. © 2017 Japanese Society of Animal Science.
Acheampong-Boateng, Owoahene; Bakare, Archibold G; Nkosi, Douglas B; Mbatha, Khanyisile R
2017-04-01
Growth performance and carcass characteristics of South African mutton merino fed graded levels of macadamia oil cake were assessed. A total of 60 South African mutton merino lambs were used in the experiment (initial live weight 25.0 ± 0.45 kg). Five diets with different inclusion levels of macadamia oil cake (MOC) were formulated: T1 (0% MOC, control), T2 (5% MOC), T3 (10% MOC), T4 (15% MOC) and T5 (20% MOC). Effects of inclusion level of MOC on average daily gain (ADG) and average daily feed intake (ADFI) were not significant (P > 0.05). Effects of inclusion levels of MOC on feed conversion ratio (FCR) of sheep were significant (P < 0.05). Highest proportion (71.2%) of sheep in the study had a carcass fat classification of 2, followed by a proportion of 17.3% sheep with a carcass fat classification of 3 and lastly 11.5% sheep had carcass fat classification of 4. Warm and cold carcass mass, chest circumference, carcass length and dressing percentage were higher in sheep fed on 5% MOC compared to other treatment diets (0, 10, 15 and 20% MOC) (P < 0.05). Fat rib eye had a greater area in sheep fed on 5% MOC (P < 0.05). It was concluded that 5% MOC provided the best results in terms of carcass characteristic measurements in sheep.
USDA-ARS?s Scientific Manuscript database
Backfat thickness affects preservation of the beef carcass after slaughter and confers organoleptic characteristics assessed by the consumer. One of the breeding goals for Canchim, a tropically adapted breed, is to comprehensively increase fat thickness. Our goal was to identify genomic regions ass...
Genome-Wide scans for carcass and meat traits in nellore cattle
USDA-ARS?s Scientific Manuscript database
Beef cattle industry is one of the main highlights of Brazilian agribusiness, however the standardization of meat products is still an issue. The lack of standardization of quality characteristics as fat thickness and tenderness, and the burden and time spent on collecting and evaluating large numbe...
Genetic and Phenotypic Parameter Estimates for Feed Intake and Other Traits in Growing Beef Cattle
USDA-ARS?s Scientific Manuscript database
Intake and feed efficiency were moderately heritable; however, residual feed intake was more heritable than intake and feed efficiency. Adjusting residual feed intake and feed efficiency for carcass fatness had little effect on heritability and correlations with remaining traits. Flight speed was ...
Capper, Judith L
2012-04-10
This study compared the environmental impact of conventional, natural and grass-fed beef production systems. A deterministic model based on the metabolism and nutrient requirements of the beef population was used to quantify resource inputs and waste outputs per 1.0 × 10⁸ kg of hot carcass weight beef in conventional (CON), natural (NAT) and grass-fed (GFD) production systems. Production systems were modeled using characteristic management practices, population dynamics and production data from U.S. beef production systems. Increased productivity (slaughter weight and growth rate) in the CON system reduced the cattle population size required to produce 1.0 × 10⁸ kg of beef compared to the NAT or GFD system. The CON system required 56.3% of the animals, 24.8% of the water, 55.3% of the land and 71.4% of the fossil fuel energy required to produce 1.0 × 10⁸ kg of beef compared to the GFD system. The carbon footprint per 1.0 × 10⁸ kg of beef was lowest in the CON system (15,989 × 10³ t), intermediate in the NAT system (18,772 × 10³ t) and highest in the GFD system (26,785 × 10³ t). The challenge to the U.S beef industry is to communicate differences in system environmental impacts to facilitate informed dietary choice.
Shibata, Masahiro; Hikino, Yasuko; Imanari, Mai; Matsumoto, Kazunori; Yamamoto, Naoyuki
2016-07-01
The present study investigated the influence of a diet largely comprising rice whole-crop silage (rWCS) on growth performance, carcass and meat characteristics, and expression of genes involved in muscle growth of Japanese Black steers. Steers were randomly separated into rWCS-fed (rWCS ad libitum and restricted feeding of concentrate) and concentrate-fed groups. Total digestible nutrient intake and daily gain (DG) decreased in rWCS-fed steers in comparison with concentrate-fed steers, whereas dressed carcass weight and final body weight did not significantly differ between the groups. Decreases in drip loss in the muscle of rWCS-fed steers may be caused by α-tocopherol and β-carotene in muscle. Feeding large amounts of rWCS to steers may maintain quantitative productivity of beef steers equally to a concentrate-based diet, and improve the qualitative productivity. Results of gene expression suggest that activation of skeletal muscle growth in rWCS-fed steers may occur at the late fattening period owing to a decrease in myostatin and increase in myosin heavy chain gene expression. Preadipocyte factor-1 and myostatin genes may be strongly involved in the control of lipid accumulation. This rearing system would allow beef production to switch to rWCS-based diets from concentrate-based diets. © 2015 Japanese Society of Animal Science.
Genomic selection using beef commercial carcass phenotypes.
Todd, D L; Roughsedge, T; Woolliams, J A
2014-03-01
In this study, an industry terminal breeding goal was used in a deterministic simulation, using selection index methodology, to predict genetic gain in a beef population modelled on the UK pedigree Limousin, when using genomic selection (GS) and incorporating phenotype information from novel commercial carcass traits. The effect of genotype-environment interaction was investigated by including the model variations of the genetic correlation between purebred and commercial cross-bred performance (ρX). Three genomic scenarios were considered: (1) genomic breeding values (GBV)+estimated breeding values (EBV) for existing selection traits; (2) GBV for three novel commercial carcass traits+EBV in existing traits; and (3) GBV for novel and existing traits plus EBV for existing traits. Each of the three scenarios was simulated for a range of training population (TP) sizes and with three values of ρX. Scenarios 2 and 3 predicted substantially higher percentage increases over current selection than Scenario 1. A TP of 2000 sires, each with 20 commercial progeny with carcass phenotypes, and assuming a ρX of 0.7, is predicted to increase gain by 40% over current selection in Scenario 3. The percentage increase in gain over current selection increased with decreasing ρX; however, the effect of varying ρX was reduced at high TP sizes for Scenarios 2 and 3. A further non-genomic scenario (4) was considered simulating a conventional population-wide progeny test using EBV only. With 20 commercial cross-bred progenies per sire, similar gain was predicted to Scenario 3 with TP=5000 and ρX=1.0. The range of increases in genetic gain predicted for terminal traits when using GS are of similar magnitude to those observed after the implementation of BLUP technology in the United Kingdom. It is concluded that implementation of GS in a terminal sire breeding goal, using purebred phenotypes alone, will be sub-optimal compared with the inclusion of novel commercial carcass phenotypes in genomic evaluations.
Yim, Dong-Gyun
2015-01-01
The effects of quality grade and storage time on physicochemical, sensory properties and microbial population of Hanwoo striploin beef were investigated. After a total of 30 Hanwoo beef were slaughtered, the cold carcasses were graded by official meat grader at 24 h postmortem. The carcasses were categorized into five groups (quality grade 1++, 1+, 1, 2, and 3) and were vacuum-packaged and stored. The samples were kept for 1, 4, 6, 8, 11, 13, 15, 18, 20, 22 and 25 d for analyses. As the quality grade was increased, moisture, protein and ash contents decreased (p<0.05). Higher quality grade corresponded with higher fat contents. The shear force values decreased with increasing quality grade and showed decreases sharply during the first 4 d (p<0.05). pH, water holding capacity, cooking loss, and volatile basic nitrogen for grade 1++ groups were lower than for grade 3 (p<0.05). CIE L* and b* values increased as increased quality grade (p<0.05). Meat color decreased until 13 d and fluctuated after 15 d of storage (p<0.05). Regarding the sensory scores, higher quality grade corresponded with higher juiciness, tenderness, flavor, fatty and palatability scores (p<0.05). Generally, increased storage time for 15 d improved sensory scores attributes. Results indicate that a high quality grade could positively influence physicochemical and sensory properties. PMID:26761865
Naugle, Alecia Larew; Barlow, Kristina E; Eblen, Denise R; Teter, Vanessa; Umholtz, Robert
2006-11-01
The U.S. Food Safety and Inspection Service (FSIS) tests sets of samples of selected raw meat and poultry products for Salmonella to ensure that federally inspected establishments meet performance standards defined in the pathogen reduction-hazard analysis and critical control point system (PR-HACCP) final rule. In the present report, sample set results are described and associations between set failure and set and establishment characteristics are identified for 4,607 sample sets collected from 1998 through 2003. Sample sets were obtained from seven product classes: broiler chicken carcasses (n = 1,010), cow and bull carcasses (n = 240), market hog carcasses (n = 560), steer and heifer carcasses (n = 123), ground beef (n = 2,527), ground chicken (n = 31), and ground turkey (n = 116). Of these 4,607 sample sets, 92% (4,255) were collected as part of random testing efforts (A sets), and 93% (4,166) passed. However, the percentage of positive samples relative to the maximum number of positive results allowable in a set increased over time for broilers but decreased or stayed the same for the other product classes. Three factors associated with set failure were identified: establishment size, product class, and year. Set failures were more likely early in the testing program (relative to 2003). Small and very small establishments were more likely to fail than large ones. Set failure was less likely in ground beef than in other product classes. Despite an overall decline in set failures through 2003, these results highlight the need for continued vigilance to reduce Salmonella contamination in broiler chicken and continued implementation of programs designed to assist small and very small establishments with PR-HACCP compliance issues.
Genome–wide association study of carcass weight in commercial Hanwoo cattle
Edea, Zewdu; Jeoung, Yeong Ho; Shin, Sung-Sub; Ku, Jaeul; Seo, Sungbo; Kim, Il-Hoi; Kim, Sang-Wook
2018-01-01
Objective The objective of the present study was to validate genes and genomic regions associated with carcass weight using a low-density single nucleotide polymorphism (SNP) Chip in Hanwoo cattle breed. Methods Commercial Hanwoo steers (n = 220) were genotyped with 20K GeneSeek genomic profiler BeadChip. After applying the quality control of criteria of a call rate ≥90% and minor allele frequency (MAF) ≥0.01, a total of 15,235 autosomal SNPs were left for genome-wide association (GWA) analysis. The GWA tests were performed using single-locus mixed linear model. Age at slaughter was fitted as fixed effect and sire included as a covariate. The level of genome-wide significance was set at 3.28×10−6 (0.05/15,235), corresponding to Bonferroni correction for 15,235 multiple independent tests. Results By employing EMMAX approach which is based on a mixed linear model and accounts for population stratification and relatedness, we identified 17 and 16 loci significantly (p<0.001) associated with carcass weight for the additive and dominant models, respectively. The second most significant (p = 0.000049) SNP (ARS-BFGL-NGS-28234) on bovine chromosome 4 (BTA4) at 21 Mb had an allele substitution effect of 43.45 kg. Some of the identified regions on BTA2, 6, 14, 22, and 24 were previously reported to be associated with quantitative trait loci for carcass weight in several beef cattle breeds. Conclusion This is the first genome-wide association study using SNP chips on commercial Hanwoo steers, and some of the loci newly identified in this study may help to better DNA markers that determine increased beef production in commercial Hanwoo cattle. Further studies using a larger sample size will allow confirmation of the candidates identified in this study. PMID:29103288
Multiple Regression Analysis to Estimate the Unit Price of Hanwoo (Bos taurus coreanae) Beef
Hur, Sun-Jin
2017-01-01
This study were estimated the contribution of carcass traits to unit price, to analyze the marbling score as a categorical variable rather than a numerical variable, and to develop an optimal model that also includes the holiday effect and the raising period. The data for this study were acquired from the Quality Evaluation of the Korea Institute for Animal Products, and consisted of the trading records of 1,613,699 heads at 12 wholesale markets from 2010 to 2014. The unit price of a cow was estimated from the following parameters: −52.50 Won/mm, 8.93 Won/cm2, 7.20 Won/kg, and −1.04 Won/day for backfat thickness, eye muscle area, carcass weight, and raising period, respectively. Parameters for the dummy variables of marbling scores varied from 0 to 8328.74 Won/kg, which means that each marbling score grade had a different price value. The unit price of a steer was estimated from the following parameters: −92.12 Won/mm, 20.22 Won/cm2, 1.30 Won/kg, and −1.72 Won/day for backfat thickness, eye muscle area, carcass weights, and raising period, respectively. Parameters for dummy variables of marbling scores varied from 0 to 7338.80 Won/kg, which means that the grades of each marbling score had different price values. The unit price of sales during traditional holidays was significantly higher (827.71 Won/kg for cows, and 645.15 Won/kg for steers) than during non-holidays.We conclude that the use of categorical values for marbling scores would be needed to evaluate the price of Hanwoo beef using multiple regression analysis based on carcass traits and environmental factors. PMID:29147089
Prendergast, Deirdre M; Lendrum, Lynsey; Pearce, Rachel; Ball, Caroline; McLernon, Joanne; O'Grady, Don; Scott, Lourda; Fanning, Seamus; Egan, John; Gutierrez, Montserrat
2011-01-05
This study aimed to investigate verocytotoxigenic Escherichia coli O157 in the largest beef and sheep slaughter plants in Ireland over a one-year period. Samples consisted of pooled rectal swabs (n=407) and pooled carcass swabs (n=407) from 5 animals belonging to the same herd or flock and minced meat (n=91) from the same sampling date. E. coli O157 isolates were characterised using PCR for a range of genes, i.e. 16S, rfbE, fliC, vtx1, vtx2, eaeA and confirmed VTEC O157 isolates were tested for antimicrobial susceptibility and typed using Pulsed-Field Gel Electrophoresis (PFGE) and Multi-Locus Variable Number of Tandem Repeat Analysis (MLVA). VTEC O157 was isolated from 7.6% and 3.9% of bovine rectal and carcass swab samples and from 5.8% and 2.9% of ovine rectal and carcass swab samples respectively. None of the bovine minced meat samples (n=77) and only one of the 14 ovine minced meat samples was positive for VTEC O157. Following PFGE and MLVA, cross contamination from faeces to carcasses was identified. While PFGE and MLVA identified the same clusters for highly related strains, MLVA discriminated better than PFGE in addition to being more rapid and less labour intensive. Results showed that cattle and sheep presented for slaughter in Ireland harbour VTEC O157, and although the levels entering the food chain are low, this should not be overlooked as possible sources of zoonotic infection; molecular typing was able to demonstrate relationships among strains and could be used to elucidate the sources of human infection. Copyright © 2010 Elsevier B.V. All rights reserved.
Pittman, Curtis I; Pendleton, Sean; Bisha, Bledar; O'Bryan, Corliss A; Belk, Keith E; Goodridge, Lawrence; Crandall, Philip G; Ricke, Steven C
2011-08-01
Escherichia coli O157:H7 and Salmonella spp. are bacterial pathogens often associated with beef, and cause many cases of foodborne illness each year in the United States. During beef slaughter and processing, these bacteria may spread from the hide or intestines to the carcass. The objective of this research was to investigate the use of naturally occurring compounds citrus essential oils (CEOs) extracted from orange peel to reduce or eliminate these pathogens at the chilling stage of processing, or during fabrication. Brisket flats (used to simulate beef subprimals) were spot inoculated with approximately 6 log of surrogate generic E. coli cocktail (previously shown to be identical in growth and survival parameters to E. coli O157:H7 and Salmonella spp.). Following drying, CEOs were applied by spraying at concentrations of 3% and 6% to the surface of different pieces of meat. Treatments were applied using a custom built spray cabinet at 2.07 bar and applied at a rate of 3.79 L/min to replicate commercial practices. The CEOs significantly reduced (P < 0.05) the concentration of E. coli on the brisket flats in comparison to inoculated no spray or water sprayed controls over a period of 90 d, while causing an initial reduction of approximately 1.4 log units. Total aerobic bacteria and psychrotrophic counts were also reduced on uninoculated briskets following treatment. These results indicate that 3% cold-pressed terpeneless Valencia orange oil could be used as an additional intervention against E. coli O157:H7 and Salmonella spp. at the refrigerated storage stage of processing. CEOs are natural compounds that have been designated as Generally Recognized as Safe (GRAS). They can be used to control Salmonella spp. and E. coli O157:H7 on beef carcasses at the chilling stage. © 2011 Institute of Food Technologists®
Sasaki, Keisuke; Ooi, Motoki; Nagura, Naoto; Motoyama, Michiyo; Narita, Takumi; Oe, Mika; Nakajima, Ikuyo; Hagi, Tatsuro; Ojima, Koichi; Kobayashi, Miho; Nomura, Masaru; Muroya, Susumu; Hayashi, Takeshi; Akama, Kyoko; Fujikawa, Akira; Hokiyama, Hironao; Kobayashi, Kuniyuki; Nishimura, Takanori
2017-08-01
Over the past few decades, beef producers in Japan have improved marbling in their beef products. It was recently reported that marbling is not well correlated with palatability as rated by Japanese consumers. This study sought to identify the consumer segments in Japan that prefer sensory characteristics of beef other than high marbling. Three Wagyu beef, one Holstein beef and two lean imported beef longissimus samples were subjected to a descriptive sensory test, physicochemical analysis and a consumer (n = 307) preference test. According to consumer classification and external preference mapping, four consumer segments were identified as 'gradual high-fat likers', 'moderate-fat and distinctive taste likers', 'Wagyu likers' and 'distinctive texture likers'. Although the major trend of Japanese consumers' beef preference was 'marbling liking', 16.9% of the consumers preferred beef samples that had moderate marbling and distinctive taste. The consumers' attitudes expressed in a questionnaire survey were in good agreement with the preference for marbling among the 'moderate-fat and distinctive taste likers'. These results indicate that moderately marbled beef is a potent category in the Japanese beef market. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.
USDA-ARS?s Scientific Manuscript database
Endocannabinoids, including anandamide (AEA) and 2-arachidonoylglycerol (2-AG), are a class of endogenous lipid mediators that activate cannabinoids receptors and may be involved in the control of feed intake and energy metabolism. The objective of this study was to quantify AEA and 2-AG in plasma a...
Evaluation of gallium maltolate on fecal Salmonella shedding in cattle
USDA-ARS?s Scientific Manuscript database
Salmonella is a major cause of foodborne illness in humans and causes over a third of all cases of gastroenteritis in the United States. Human foodborne outbreaks due to Salmonella have been traced to milk, beef, pork, and poultry. Fecal contamination of the carcass and hide is thought to be a maj...
USDA-ARS?s Scientific Manuscript database
British × Continental steers (n = 168; 7 pens/treatment; initial BW = 362 kg) were used to evaluate the dose of trenbolone acetate (TBA) and estradiol-17ß (E2) and feeding of zilpaterol hydrochloride (ZH) on performance and carcass characteristics. A randomized complete block design was used with a ...
USDA-ARS?s Scientific Manuscript database
Electrical stimulation (ES) of animal carcasses during postmortem has been commonly used by beef industry to enhance meat tenderness, and has been recently adapted for commercial use with poultry. Majority of published investigations of ES effects on the tenderness of early-deboned poultry breast m...
Meat Cutting Classes--Popular with Adults
ERIC Educational Resources Information Center
Mostad, James; Carpentier, Dale
1976-01-01
Presents a session by session description of a "meats" class, which is offered to high school students (9-week period) and adults (8-week period). The classes cover identification of cuts (beef, sheep, hogs, and veal; grades and grading of live animals and carcasses; economics of butchering and cutting your own meat; actual slaughtering; and the…
West, S E; Nicholson, K L; Nicholson, J D W; Griffin, D B; Lawrence, T E; Wasser, B E; Savell, J W
2011-08-01
Three subprimals from beef carcasses, Average (mean=340.6kg) and Heavy weight (mean=461.6kg), were cut using Innovative versus Conventional cutting styles. Longer (P<0.05) processing times were required for the Heavy compared to Average and Innovative compared to Conventional. Total saleable yields were lower for the Innovative compared to Conventional for the top sirloin butt (P=0.0025) and ribeye (P<0.0001), but not for the strip loin (P=0.1416). However, yields were higher for the Heavy compared to Average for the ribeye (P=0.0054) and strip loin (P=0.0017), but not for the top sirloin butt (P=0.6797). Retail pricing increases for the Innovative compared to Conventional were 11.6% for top sirloin butt, 26.9% for ribeye, and 2.6% for strip loin. Retailers adopting innovative cutting styles to more effectively merchandise heavyweight beef must account for the decreased primary saleable yields and increased labor requirements through increased retail pricing. Copyright © 2011 Elsevier Ltd. All rights reserved.
Elam, N A; Gleghorn, J F; Rivera, J D; Galyean, M L; Defoor, P J; Brashears, M M; Younts-Dahl, S M
2003-11-01
In Exp. 1, 240 beef steers (initial BW = 332.8 kg) were used to determine the effects of Lactobacillus acidophilus (LA) plus Propionibacterium freudenreichii (PF) on performance, carcass, and intestinal characteristics; serum IgA concentrations; and the prevalence of Escherichia coli O157 (EC). Cattle were fed a steam-flaked corn-based, 92% concentrate diet, and the four direct-fed microbial (DFM) treatments (12 pens/treatment) included in a randomized complete block design were as follows: 1) control, lactose carrier only (CON); 2) 1 x 10(9) cfu of LA NP51 plus 1 x 10(6) cfu of LA NP45 plus 1 x 10(9) cfu of PF NP24 per animal daily (LA45-51H); 3) 1 x 10(9) cfu of LA NP51 plus 1 x 10(9) cfu of PF NP24 per animal daily (LA51); and 4) 1 x 10(6) cfu of LA NP51 plus 1 x 10(6) cfu of LA NP45 plus 1 x 10(9) cfu of PF NP24 per animal daily (LA45-51L). No differences (P > 0.10) were detected for pen-based performance data. The average lamina propria thickness for LA51 and LA45-51H steers was less (P = 0.02) than the average for CON and LA45-51L steers. Moreover, LA51 and LA45-51H steers had a lower (P = 0.06) prevalence of EC shedding than CON and LA45-51L steers. In Exp. 2, 660 steers fed 91% concentrate, steam-flaked corn-based diets were used to determine the effects of the following DFM treatments (10 pens/treatment) on performance, carcass, and intestinal characteristics: 1) control, lactose carrier only (CON); 2) 5 x 10(6) cfu of LA NP51 plus 5 x 10(6) cfu of LA NP45 plus 1 x 10(9) cfu of PF NP24 per animal daily (LA45-51L); and 3) 1 x 10(9) cfu of LA NP51 plus 5 x 10(6) cfu of LA NP45 plus 1 x 10(9) cfu of PF NP24 per animal daily (LA45-51H). Steers were from two weight groups (WG). One group (SDOF; BW at arrival = 351.5 kg) had grazed before arrival, and the other group (LDOF; BW at arrival = 314 kg) had been in a grower yard. A split plot was used with WG as the whole-plot factor and DFM in the split plot. There was an interaction of WG and DFM for ADG (P = 0.05) and for carcass-adjusted ADG (P = 0.08). The simple-effect ADG and carcass-adjusted ADG means for DFM treatments differed (P < or = 0.01) between WG classifications. Within SDOF, ADG for CON and LA45-51L did not differ (P = 0.70), but both were less (P < or = 0.08) than for LA45-51H. Overall, these data indicate that live cultures of LA plus PF did not greatly affect feedlot performance and carcass characteristics. Some of the DFM used decreased fecal EC shedding, which might be related to the results for ileal lamina propria thickness.
Blanco, Mireia; Casasús, Isabel; Ripoll, Guillermo; Albertí, Pere; Panea, Begoña; Joy, Margalida
2017-11-01
Replacing concentrates with forages in the diet of finishing cattle to satisfy societal demands and for economic reasons is a target for beef farmers, but this change may affect meat acceptance. In the Mediterranean area, young bulls are usually finished on concentrates (Conventional beef). Alternatively, steers can be finished on grass with supplements (G-supp); however, if carcasses are too lean, meat quality may be negatively affected. To increase fat deposition, grazing steers were finished on a total mixed ration composed of alfalfa hay and corn (TMR). Thus the objective of the study was to compare the quality of Longissimus muscle of the three systems. Conventional beef had low yellowness and similar lightness and redness values compared with the beef from the forage-based systems, which differed slightly. The meat of the G-supp and TMR steers had higher conjugated linoleic acid (CLA) and total n-3 polyunsaturated fatty acid (PUFA) contents and lower n-6/n-3 PUFA ratio (more appropriate from a human health point of view) but was tougher than the Conventional beef. The Conventional beef was better accepted by consumers than the beef from both forage-based systems because it was the most tender. Thus tenderness of meat from forage-fed steers should be improved to ensure consumer acceptance. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.
Fisher, M W; Gregory, N G; Muir, P D
2012-05-01
To assess current practices on sheep and beef farms that deprive sheep of feed prior to transport to facilitate effluent management and processing at slaughter. A national telephone survey of 122 sheep and 346 sheep and beef farmers was conducted in March and April 2010. They were asked how long sheep were held off green feed prior to transport and why, what environment the sheep were held in, and if that period ever varied. Of the 468 respondents, 303 (65%) removed their sheep from green feed 3-12 h before transport for slaughter, with longer periods reported in the South than North Island. The main reasons given were to reduce the volume of effluent for transport operators (n=174), to prevent wool staining during transport (n=173), and that sheep were better suited to load and travel empty (n=171). Water was provided during feed deprivation by 313 farmers. The period of food deprivation could be altered in response to requirements of transporters and processors, the weather, and by the class of stock involved, although 115/468 (25%) farmers stated that they never changed their normal protocol. Amongst survey respondents, common practices compared favourably with recommendations to reduce effluent during transportation. Previous studies have investigated the effects of fasting lambs whilst in lairage prior to slaughter and focussed on carcass quality such as carcass weight and tenderness. Changes in liveweight and gastrointestinal tract contents suggest feed deprivation reduces the risk of defaecation and urination contributing to the accumulation of effluent during transport and of carcass contamination during processing. However, the point at which that risk is acceptable to transport and processing is unclear. Fasting results in physiological changes indicative of altered metabolism but it is not clear when those changes are indicative of adaptation to food deprivation or metabolic depletion and compromised welfare. There may be opportunities to improve the logistics of livestock preparation, transport and processing.
Kashoma, Isaac P.; Kassem, Issmat I.; John, Julius; Kessy, Beda M.; Gebreyes, Wondwossen; Kazwala, Rudovick R.
2016-01-01
Campylobacter species are commonly transmitted to humans through consumption of contaminated foods such as milk and meat. The aim of this study was to investigate the prevalence, antimicrobial resistance, and genetic determinants of resistance of Campylobacter isolated from raw milk and beef carcasses in Tanzania. The antimicrobial resistance genes tested included blaOXA-61 (ampicillin), aph-3-1 (aminoglycoside), tet(O) (tetracycline), and cmeB (multi-drug efflux pump). The prevalence of Campylobacter was 9.5% in beef carcasses and 13.4% in raw milk, respectively. Using multiplex-polymerase chain reaction (PCR), we identified 58.1% of the isolates as Campylobacter jejuni, 30.7% as Campylobacter coli, and 9.7% as other Campylobacter spp. One isolate (1.6%) was positive for both C. jejuni and C. coli specific PCR. Antimicrobial susceptibility testing using the disk diffusion assay and the broth microdilution method showed resistance to: ampicillin (63% and 94.1%), ciprofloxacin (9.3% and 11.8%), erythromycin (53.7% and 70.6%), gentamicin (0% and 15.7%), streptomycin (35.2% and 84.3%), and tetracycline (18.5% and 17.7%), respectively. Resistance to azithromycin (42.6%), nalidixic acid (64.8%), and chloramphenicol (13%) was determined using the disk diffusion assay only, while resistance to tylosin (90.2%) was quantified using the broth microdilution method. The blaOXA-61 (52.6% and 28.1%), cmeB (26.3% and 31.3%), tet(O) (26.3% and 31.3%), and aph-3-1 (5.3% and 3.0%) were detected in C. coli and C. jejuni. These findings highlight the extent of antimicrobial resistance in Campylobacter occurring in important foods in Tanzania. The potential risks to consumers emphasize the need for adequate control approaches, including the prudent use of antimicrobials to minimize the spread of antimicrobial-resistant Campylobacter. PMID:26153978
Earley, Bernadette; McNamara, John D; Jerrams, Stephen J; O'Riordan, Edward G
2017-05-30
The objective was to investigate the effect of placing mats on concrete slatted floors on performance, behaviour, hoof condition, dirt scores, physiological and immunological variables of beef steers, and to compare responses with animals on out-wintering pads. Continental crossbred beef steers [n = 360; mean (±SD) initial live weight 539 kg (42.2)] were blocked by breed and live weight and randomly assigned to one of five treatments; (1) Concrete slats alone, (2) Mat 1 (Natural Rubber structure) (Durapak Rubber Products), (3) Mat 2 (Natural rubber structure) (EasyFix), (4) Mat 3 (modified ethylene vinyl acetate (EVA) foam structure) and (5) Out-wintering pads (OWP's). Animals on the OWPs had a greater (P < 0.05) live weight gain (P < 0.05) compared with the slat and Mat 2 treatments: results for Mat 1 and Mat 3 were the same (P > 0.05) as the other treatments. Animals on the OWPs had reduced lying percentage time compared with all the other treatments. Dry matter (DM) intake was greater for animals on the OWPs compared with all the other treatments. Carcass weight, kill out proportion, carcass fat score, carcass composition score, FCR and physiological responses were similar (P > 0.05) among treatments. No incidence of laminitis was observed among treatments. The number of hoof lesions was greater on all mat types (P < 0.05) compared with concrete slats and OWP treatments. Dirt scores were greater (P < 0.05) for animals on OWPs when measured on days 42, 84, 105, 126 and 150 compared with animals on slats. Under the conditions adopted for the present study, there was no evidence to suggest that animals housed on bare concrete slats were disadvantaged in respect of animal welfare compared with animals housed on other floor types. It is concluded that the welfare of steers was not adversely affected by slats compared with different mat types or OWPs.
Comparative muscle transcriptome associated with carcass traits of Nellore cattle.
Silva-Vignato, Bárbara; Coutinho, Luiz L; Cesar, Aline S M; Poleti, Mirele D; Regitano, Luciana C A; Balieiro, Júlio C C
2017-07-03
Commercial cuts yield is an important trait for beef production, which affects the final value of the products, but its direct determination is a challenging procedure to be implemented in practice. The measurement of ribeye area (REA) and backfat thickness (BFT) can be used as indirect measures of meat yield. REA and BFT are important traits studied in beef cattle due to their strong implication in technological (carcass yield) and nutritional characteristics of meat products, like the degree of muscularity and total body fat. Thus, the aim of this work was to study the Longissimus dorsi muscle transcriptome of Nellore cattle, associated with REA and BFT, to find differentially expressed (DE) genes, metabolic pathways, and biological processes that may regulate these traits. By comparing the gene expression level between groups with extreme genomic estimated breeding values (GEBV), 101 DE genes for REA and 18 for BFT (false discovery rate, FDR 10%) were identified. Functional enrichment analysis for REA identified two KEGG pathways, MAPK (Mitogen-Activated Protein Kinase) signaling pathway and endocytosis pathway, and three biological processes, response to endoplasmic reticulum stress, cellular protein modification process, and macromolecule modification. The MAPK pathway is responsible for fundamental cellular processes, such as growth, differentiation, and hypertrophy. For BFT, 18 biological processes were found to be altered and grouped into 8 clusters of semantically similar terms. The DE genes identified in the biological processes for BFT were ACHE, SRD5A1, RSAD2 and RSPO3. RSAD2 has been previously shown to be associated with lipid droplet content and lipid biosynthesis. In this study, we identified genes, metabolic pathways, and biological processes, involved in differentiation, proliferation, protein turnover, hypertrophy, as well as adipogenesis and lipid biosynthesis related to REA and BFT. These results enlighten some of the molecular processes involved in muscle and fat deposition, which are economically important carcass traits for beef production.
Kashoma, Isaac P; Kassem, Issmat I; John, Julius; Kessy, Beda M; Gebreyes, Wondwossen; Kazwala, Rudovick R; Rajashekara, Gireesh
2016-01-01
Campylobacter species are commonly transmitted to humans through consumption of contaminated foods such as milk and meat. The aim of this study was to investigate the prevalence, antimicrobial resistance, and genetic determinants of resistance of Campylobacter isolated from raw milk and beef carcasses in Tanzania. The antimicrobial resistance genes tested included blaOXA-61 (ampicillin), aph-3-1 (aminoglycoside), tet(O) (tetracycline), and cmeB (multi-drug efflux pump). The prevalence of Campylobacter was 9.5% in beef carcasses and 13.4% in raw milk, respectively. Using multiplex-polymerase chain reaction (PCR), we identified 58.1% of the isolates as Campylobacter jejuni, 30.7% as Campylobacter coli, and 9.7% as other Campylobacter spp. One isolate (1.6%) was positive for both C. jejuni and C. coli specific PCR. Antimicrobial susceptibility testing using the disk diffusion assay and the broth microdilution method showed resistance to: ampicillin (63% and 94.1%), ciprofloxacin (9.3% and 11.8%), erythromycin (53.7% and 70.6%), gentamicin (0% and 15.7%), streptomycin (35.2% and 84.3%), and tetracycline (18.5% and 17.7%), respectively. Resistance to azithromycin (42.6%), nalidixic acid (64.8%), and chloramphenicol (13%) was determined using the disk diffusion assay only, while resistance to tylosin (90.2%) was quantified using the broth microdilution method. The blaOXA-61 (52.6% and 28.1%), cmeB (26.3% and 31.3%), tet(O) (26.3% and 31.3%), and aph-3-1 (5.3% and 3.0%) were detected in C. coli and C. jejuni. These findings highlight the extent of antimicrobial resistance in Campylobacter occurring in important foods in Tanzania. The potential risks to consumers emphasize the need for adequate control approaches, including the prudent use of antimicrobials to minimize the spread of antimicrobial-resistant Campylobacter.
Estimation of Relative Economic Weights of Hanwoo Carcass Traits Based on Carcass Market Price
Choy, Yun Ho; Park, Byoung Ho; Choi, Tae Jung; Choi, Jae Gwan; Cho, Kwang Hyun; Lee, Seung Soo; Choi, You Lim; Koh, Kyung Chul; Kim, Hyo Sun
2012-01-01
The objective of this study was to estimate economic weights of Hanwoo carcass traits that can be used to build economic selection indexes for selection of seedstocks. Data from carcass measures for determining beef yield and quality grades were collected and provided by the Korean Institute for Animal Products Quality Evaluation (KAPE). Out of 1,556,971 records, 476,430 records collected from 13 abattoirs from 2008 to 2010 after deletion of outlying observations were used to estimate relative economic weights of bid price per kg carcass weight on cold carcass weight (CW), eye muscle area (EMA), backfat thickness (BF) and marbling score (MS) and the phenotypic relationships among component traits. Price of carcass tended to increase linearly as yield grades or quality grades, in marginal or in combination, increased. Partial regression coefficients for MS, EMA, BF, and for CW in original scales were +948.5 won/score, +27.3 won/cm2, −95.2 won/mm and +7.3 won/kg when all three sex categories were taken into account. Among four grade determining traits, relative economic weight of MS was the greatest. Variations in partial regression coefficients by sex categories were great but the trends in relative weights for each carcass measures were similar. Relative economic weights of four traits in integer values when standardized measures were fit into covariance model were +4:+1:−1:+1 for MS:EMA:BF:CW. Further research is required to account for the cost of production per unit carcass weight or per unit production under different economic situations. PMID:25049531
Nguyen, T T H; Doreau, M; Eugène, M; Corson, M S; Garcia-Launay, F; Chesneau, G; van der Werf, H M G
2013-05-01
This study evaluated effects of farming practice scenarios aiming to reduce greenhouse gas (GHG) emissions and subsequent alternative land use on environmental impacts of a beef cattle production system using the life cycle assessment approach. The baseline scenario includes a standard cow-calf herd with finishing heifers based on grazing, and a standard bull-fattening herd using a diet mainly based on maize silage, corresponding to current farm characteristics and management by beef farmers in France. Alternative scenarios were developed with changes in farming practices. Some scenarios modified grassland management (S1: decreasing mineral N fertiliser on permanent grassland; S2: decreasing grass losses during grazing) or herd management (S3: underfeeding of heifers in winter; S4: fattening female calves instead of being reared at a moderate growth rate; S5: increasing longevity of cows from 7 to 9 years; S6: advancing first calving age from 3 to 2 years). Other scenarios replaced protein sources (S7: partially replacing a protein supplement by lucerne hay for the cow-calf herd; S8: replacing soya bean meal with rapeseed meal for the fattening herd) or increased n-3 fatty acid content using extruded linseed (S9). The combination of compatible scenarios S1, S2, S5, S6 and S8 was also studied (S10). The impacts, such as climate change (CC, not including CO2 emissions/sequestration of land use and land-use change, LULUC), CC/LULUC (including CO2 emissions of LULUC), cumulative energy demand, eutrophication (EP), acidification and land occupation (LO) were expressed per kg of carcass mass and per ha of land occupied. Compared with the baseline, the most promising practice to reduce impacts per kg carcass mass was S10 (all reduced by 13% to 28%), followed by S6 (by 8% to 10%). For other scenarios, impact reduction did not exceed 5%, except for EP (up to 11%) and LO (up to 10%). Effects of changes in farming practices (the scenarios) on environmental impacts varied according to impact category and functional unit. For some scenarios (S2, S4, S6 and S10), permanent grassland area and LO per kg of carcass decreased by 12% to 23% and 9% to 19%, respectively. If the 'excess' permanent grassland was converted to fast-growing conifer forest to sequester carbon in tree and soil biomass, CC/LULUC per kg of carcass could be reduced by 20%, 25%, 27% and 48% for scenarios S2, S4, S6 and S10, respectively. These results illustrate the potential of farming practices and forest as an alternative land use to contribute to short- and mid-term GHG mitigation of beef cattle production systems.
Golder, H M; Lean, I J
2016-01-01
The effects of lasalocid on rumen measures, beef and dairy performance, and carcass traits were evaluated using meta-analysis. Meta-regression was used to investigate sources of heterogeneity. Ten studies (20 comparisons) were used in the meta-analysis on rumen measures. Lasalocid increased total VFA and ammonia concentrations by 6.46 and 1.44 m, respectively. Lasalocid increased propionate and decreased acetate and butyrate molar percentage (M%) by 4.62, 3.18, and 0.83%, respectively. Valerate M% and pH were not affected. Meta-regression found butyrate M% linearly increased with duration of lasalocid supplementation (DUR; = 0.017). When >200 mg/d was fed, propionate and valerate M% were higher and acetate M% was lower ( = 0.042, = 0.017, and = 0.005, respectively). Beef performance was assessed using 31 studies (67 comparisons). Lasalocid increased ADG by 40 g/d, improved feed-to-gain ratio (F:G) by 410 g/kg, and improved feed efficiency (FE; combined measure of G:F and the inverse of F:G). Lasalocid did not affect DMI, but heterogeneity in DMI was influenced by DUR ( = 0.004) and the linear effect of entry BW ( = 0.011). The combination of ≤100 vs. >100 d DUR and entry BW ≤275 vs. >275 kg showed that cattle ≤275 kg at entry fed lasalocid for >100 d had the lowest DMI. Heterogeneity of ADG was influenced by the linear effect of entry BW ( = 0.028) but not DUR. Combining entry BW ≤275 vs. >275 kg and DUR showed that cattle entering at >275 kg fed ≤100 d had the highest ADG. The FE ( = 0.025) and F:G ( = 0.015) linearly improved with dose, and entry BW >275 kg improved F:G ( = 0.038). Fourteen studies (25 comparisons) were used to assess carcass traits. Lasalocid increased HCW by 4.73 kg but not dressing percentage, mean fat cover, or marbling score. Heterogeneity of carcass traits was low and not affected by DUR or dose. Seven studies (11 comparisons) were used to assess dairy performance but the study power was relatively low and the evidence base is limited. Lasalocid decreased DMI in total mixed ration-fed cows by 0.89 kg/d but had no effect on milk yield, milk components, or component yields. Dose linearly decreased DMI ( = 0.049). The DUR did not affect heterogeneity of dairy measures. This work showed that lasalocid improved ADG, HCW, FE, and F:G for beef production. These findings may reflect improved energy efficiency from increased propionate M% and decreased acetate and butyrate M%. Large dairy studies are required for further evaluation of effects of lasalocid on dairy performance.
Small, A; James, C; James, S; Davies, R; Liebana, E; Howell, M; Hutchison, M; Buncic, S
2006-10-01
Foodborne pathogens, such as Salmonella, may remain in abattoir lairages after cleansing and pose a risk of transfer and contamination from one processing day to the next. These organisms may be transferred to the outer surface of animals held in lairage facilities, and the skin or hide may be a significant source of microbial contamination on the red meat carcasses subsequently produced. Sponge samples were taken from various sites in the lairage (n = 556), and single-pass sponge samples were taken from one side of red meat carcasses (n = 1,050) at five commercial abattoirs in Southwest England and tested for the presence of Salmonella. Of these, 6.5% of lairage samples were positive, containing estimated numbers of up to 10(4) Salmonella organisms per sampled area (50 by 50 cm). Salmonella was found on 9.6% of 240 lamb carcasses, 12.7% of 330 beef carcasses, 31% of 70 pig carcasses, 20% of 80 calf carcasses younger than 14 days of age, and none of 330 cull cow and bull carcasses. Subtyping divided the 137 isolates into seven serogroups and three pulsed-field gel electrophoresis clusters, and sensitivity testing against a bank of 16 antimicrobials indicated that 47 isolates had resistance to one or more antimicrobial agents. These results indicate that Salmonella contamination can persist in the lairage environment from one processing day to the next and that Salmonella is present on red meat carcasses, although the implications of residual lairage contamination on carcass meat microbiology are not clear from this study. Abattoir owners should take steps to reduce the level of contamination in their premises to prevent contamination from being carried over from one processing day to the next.
Gunn, Patrick J; Bridges, Glen A; Lemenager, Ronald P; Schoonmaker, Jon P
2017-09-01
This study was conducted to determine the impact of dried distiller's grain with solubles (DDGS) from 192 days of gestation through 118 days of lactation on feedlot performance, carcass characteristics, Longissimus muscle (LM) fatty acids and glucose tolerance of male progeny (n = 36). Angus-Simmental heifer dams were fed diets that contained either DDGS (DG) or not (CON) formulated to provide similar daily net energy for gain but differing crude protein. In the feedlot, male progeny were fed a diet devoid of DDGS. An intravenous glucose tolerance test (IVGTT) was performed on a subset of 20 steers prior to harvest. Steers were harvested at a common 12th rib fat depth. Data were analyzed with the GLIMMIX and MIXED procedures of SAS. Performance (P ≥ 0.11) and glucose and insulin concentrations during IVGTT (P ≥ 0.24) did not differ between treatments. Dressing percentage tended to be greater (P = 0.09) in DG than CON progeny, but all other carcass characteristics did not differ (P ≥ 0.18). Progeny from DG dams had greater LM 16:2, 18:0, and 20:1 n-9 concentrations than progeny from CON dams (P ≤ 0.02). In conclusion, DDGS are a viable option for gestating and lactating beef cows. © 2017 Japanese Society of Animal Science.
The ability of video image analysis to predict lean meat yield and EUROP score of lamb carcasses.
Einarsson, E; Eythórsdóttir, E; Smith, C R; Jónmundsson, J V
2014-07-01
A total of 862 lamb carcasses that were evaluated by both the VIAscan® and the current EUROP classification system were deboned and the actual yield was measured. Models were derived for predicting lean meat yield of the legs (Leg%), loin (Loin%) and shoulder (Shldr%) using the best VIAscan® variables selected by stepwise regression analysis of a calibration data set (n=603). The equations were tested on validation data set (n=259). The results showed that the VIAscan® predicted lean meat yield in the leg, loin and shoulder with an R 2 of 0.60, 0.31 and 0.47, respectively, whereas the current EUROP system predicted lean yield with an R 2 of 0.57, 0.32 and 0.37, respectively, for the three carcass parts. The VIAscan® also predicted the EUROP score of the trial carcasses, using a model derived from an earlier trial. The EUROP classification from VIAscan® and the current system were compared for their ability to explain the variation in lean yield of the whole carcass (LMY%) and trimmed fat (FAT%). The predicted EUROP scores from the VIAscan® explained 36% of the variation in LMY% and 60% of the variation in FAT%, compared with the current EUROP system that explained 49% and 72%, respectively. The EUROP classification obtained by the VIAscan® was tested against a panel of three expert classifiers (n=696). The VIAscan® classification agreed with 82% of conformation and 73% of the fat classes assigned by a panel of expert classifiers. It was concluded that VIAscan® provides a technology that can directly predict LMY% of lamb carcasses with more accuracy than the current EUROP classification system. The VIAscan® is also capable of classifying lamb carcasses into EUROP classes with an accuracy that fulfils minimum demands for the Icelandic sheep industry. Although the VIAscan® prediction of the Loin% is low, it is comparable to the current EUROP system, and should not hinder the adoption of the technology to estimate the yield of Icelandic lambs as it delivered a more accurate prediction for the Leg%, Shldr% and overall LMY% with negligible prediction bias.
USDA-ARS?s Scientific Manuscript database
Genetic markers in casein (CSN1S1) and thyroglobulin (TG) genes have previously been associated with fat distribution in cattle. Determining the nature of these genetic associations (additive, recessive, or dominant) has been difficult because both markers have small minor allele frequencies in mos...
USDA-ARS?s Scientific Manuscript database
Several antimicrobial compounds are in commercial meat processing plants for the purpose of pathogens control on beef carcasses. However, the efficacy of the method used is influenced by a number of factors such as spray pressure, temperature, type of chemical and concentration, exposure time, metho...
USDA-ARS?s Scientific Manuscript database
Ghrelin is a gut peptide that when acylated is thought to stimulate appetite. Circulating ghrelin concentrations could potentially be used as a predictor of DMI in cattle. The objective of this experiment was to determine the association of circulating ghrelin concentrations with DMI and other produ...
Adugna, Feben; Pal, Mahendra; Girmay, Gebrerufael
2018-01-01
A cross-sectional study was conducted from October 2013 to April 2014 to determine the prevalence and antibiotic resistance of Staphylococcus aureus from beef of Addis Ababa Abattoir and butcher shops in Addis Ababa. Seven hundred sixty-eight swab samples were taken from the abattoir and butcher carcasses using a systematic random sampling. One hundred twenty swab samples were also taken from hooks, cutting tables, and knives from the abattoir. Staphylococcus aureus positive isolates were taken for antibiotic susceptibility test. A questionnaire survey was conducted in the abattoir and butcher workers to assess the hygienic practice and possible risk factors regarding the contamination of meat. The prevalence of S. aureus in the abattoir, butcher, cutting table, hook, and knife was 9.4%, 19.8%, 15%, 15%, and 22.5%, respectively. The prevalence of S. aureus in the knife and butcher was found to be 2.8 (OR = 2.8, CI = 1.2-6.4) and 2.4 (OR = 2.4, CI = 1.6-3.6) times that of the abattoir results ( p < 0.01). The antimicrobial susceptibility testing was also conducted on 133 isolates of S. aureus using the disc diffusion susceptibility method. Bacitracin, neomycin, and methicillin were found to be 100% resistant to S. aureus . To avoid the presence of pathogenic Staphylococcus isolates, preventive measures using good hygienic practices during slaughtering and handling of the beef carcasses are recommended.
[Polymorphisms of bGH, RORC, and DGAT1 genes in Russian beef cattle breeds].
Gorlov, I F; Fedunin, A A; Randelin, D A; Sulimova, G E
2014-12-01
We examined the allelic and genotypic polymorphisms of genes of the retinoic acid receptor-related orphan receptor C (RORC), diacylglycerol acyltransferase-1 (DGAT1), and growth hormone (bGH) in Russian beef cattle breeds in two populations of Kazakh white-headed cattle (of Kazakh and Russian selection) and in the Kalmyk cattle breed and Mongolian hogorogo breed, which is related to Kalmyk breed. The studied genes are associated with parameters of meat quality: marbleness (bGH and RORC) and tenderness (DGAT1). They are also associated with an increase in carcass weight (bGH). We found that Russian and Kazakh populations of the Kazakh white-headed.breed were characterized by a high content of the AA genotype of RORC (0.713 and 0.608, respectively) and of the AA genotype of DGAT1 (0.913 and 0.975), both of which are preferable for meat quality. The total frequencies for the combined genotypes for the bGH and RORC genes, which provide for superior meat quality and carcass weight, in the populations of Kazakh white-headed cattle (GG/AA and GC/AA-68.8% and 57% in the Russian and Kazakh populations, respectively) exceeded the frequencies in the two other studied breeds by two times. Overall, the obtained results point to the high genetic potential of both populations of Kazakh white-headed cattle breeds in beef production. Results of this study can be used to improve the selection of meat traits in industrial livestock.
Adugna, Feben; Pal, Mahendra
2018-01-01
Objective A cross-sectional study was conducted from October 2013 to April 2014 to determine the prevalence and antibiotic resistance of Staphylococcus aureus from beef of Addis Ababa Abattoir and butcher shops in Addis Ababa. Seven hundred sixty-eight swab samples were taken from the abattoir and butcher carcasses using a systematic random sampling. One hundred twenty swab samples were also taken from hooks, cutting tables, and knives from the abattoir. Staphylococcus aureus positive isolates were taken for antibiotic susceptibility test. A questionnaire survey was conducted in the abattoir and butcher workers to assess the hygienic practice and possible risk factors regarding the contamination of meat. Results The prevalence of S. aureus in the abattoir, butcher, cutting table, hook, and knife was 9.4%, 19.8%, 15%, 15%, and 22.5%, respectively. The prevalence of S. aureus in the knife and butcher was found to be 2.8 (OR = 2.8, CI = 1.2–6.4) and 2.4 (OR = 2.4, CI = 1.6–3.6) times that of the abattoir results (p < 0.01). The antimicrobial susceptibility testing was also conducted on 133 isolates of S. aureus using the disc diffusion susceptibility method. Bacitracin, neomycin, and methicillin were found to be 100% resistant to S. aureus. To avoid the presence of pathogenic Staphylococcus isolates, preventive measures using good hygienic practices during slaughtering and handling of the beef carcasses are recommended. PMID:29854759
Conroy, S B; Drennan, M J; Kenny, D A; McGee, M
2009-11-01
This study examined the relationship of muscular and skeletal scores and ultrasound measurements in the live animal, and carcass conformation and fat scores with carcass composition and value using 336 steers, slaughtered at 2 years of age. Live animal scores and measurements were recorded at 8 to 12 months of age and pre-slaughter. Following slaughter, each carcass was classified for conformation and fatness and the right side dissected into meat, fat and bone. Carcass conformation scores and fat scores were both measured on a continuous 15-point scale and ranged from 2.0 to 12.0 and from 2.8 to 13.3, respectively. Pre-slaughter muscular scores showed positive correlations (P < 0.001) ranging from 0.31 to 0.86 with carcass meat proportion, proportion of high-value cuts in the carcass, conformation score and carcass value, significant negative correlations with carcass fat (r = -0.13) and bone (r = -0.81) proportions, and generally low non-significant relationships with the proportion of high-value cuts in meat and carcass fat score. Pre-slaughter ultrasound muscle depth and carcass conformation score showed similar correlations with carcass traits to those using the pre-slaughter muscular scoring procedure. Pre-slaughter ultrasound fat depth showed positive correlations (P < 0.001) with carcass fat proportion (r = 0.59) and fat score (r = 0.63), and significant negative correlations (-0.23 to -0.50) with carcass meat and bone proportions, high-value cuts in the carcass and in meat, and carcass value. Pre-slaughter skeletal scores generally showed poor correlations ranging from -0.38 to 0.52 with the various carcass traits. Corresponding correlations (-0.26 to 0.44) involving records collected at 8 to 12 months of age were lower than those using pre-slaughter records. A one-unit increase in carcass conformation score increased carcass meat proportion and value by 11.2 g/kg and 5.6 cents/kg, respectively. Corresponding values for fat score were -8.2 g/kg and -5.1 cents/kg. In conclusion, both pre-slaughter live animal scores/measurements and carcass classification scores, explained an appreciable amount of the total variation in carcass meat, fat and bone proportions and carcass value, and a moderate amount of the variation in proportion of high-value meat cuts in the carcass.
Amatayakul-Chantler, S; Hoe, F; Jackson, J A; Roca, R O; Stegner, J E; King, V; Howard, R; Lopez, E; Walker, J
2013-09-01
Bos indicus bulls 20 months of age grazed on pasture in Minas Gerais, Brazil either received 2 doses of the GnRF vaccine Bopriva at d0 and d91 (group IC, n=144) or were surgically castrated on d91 (group SC, n=144). Slaughter on d280, was 27 weeks after castration. Adverse safety issues in 8% of group SC bulls following surgery contrasted with 0% in group IC bulls. At d105 testosterone levels were suppressed to similar levels in both groups. Importantly, group IC bulls had higher live weight, hot carcass weight, ADG (P<0.005) and dressing percentage (P<0.0001) compared to group SC animals. There were no negative effects on carcass or meat quality traits, thus immunocastration was concluded to offer a safe and effective method that provides production gains, and improves animal welfare in Bos indicus beef bulls without impacting meat and carcass quality. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.
Judy Walter, Lee-Anne; Schmitz, Angela Nicole; Nichols, Wade Taylor; Hutcheson, John Paul; Lawrence, Ty Ellis
2018-05-04
A trial was conducted to examine live growth efficiency, harvest yields, and carcass grading performance of steers fed at maintenance (M) or at ad libitum (A) level of intake during zilpaterol hydrochloride (Z) supplementation. Single-sired, beef steers (n = 56; start of trial BW 590 ± 36 kg) blocked (n = 2) by weight and terminal implant were sorted into pairs (n = 14 per block) by weight. Pairs of steers were initially assigned to 0, 28, or 56 d of feeding. Within 28 or 56 d, pairs were assigned to M or A intake. Steers within a pair assigned to 56 d of feeding were randomly assigned to either 20 d of Z supplementation (90 mg/d per steer) with a 4 d withdrawal period prior to slaughter or to no ZH supplementation (C). Steers were housed and fed in individual pens. Weights of all non-carcass and carcass components were recorded at slaughter; carcasses were graded 24-h postmortem. Data were analyzed via a mixed model; the fixed effect was treatment combination with random effects of block and pair. Live growth data used harvest day as the repeated measure and animal as the subject. Single df contrasts were constructed for day 0 vs. day 28, day 0 vs. day 56, day 28 vs. day 56, M vs. A, and C vs. Z. Treatment impacted (P ≤ 0.05) live ADG; contrasts indicated A (1.33) was greater than M (0.14 kg), and Z (1.12) was greater than C (0.82 kg). Similarly, carcass ADG differences (P < 0.01) indicated A (1.04) was greater than M (0.36 kg), and Z (1.35) was greater than C (0.71 kg). Intake level altered BW and empty body weight (EBW); M cattle had reduced BW and EBW (P < 0.01, 585 and 540 kg) than A cattle (647 and 597 kg). Cattle fed at M had less carcass and internal cavity mass (P < 0.01, 359 and 79.4 kg) than A cattle (394 and 93.5 kg). Liver mass was reduced by M feeding (P < 0.01; M-5.03, A-6.69 kg) and Z treatment (P < 0.01; Z-5.64, C-6.06 kg). Moreover, mass of total splanchnic tissue was less (P < 0.01) for M cattle than A cattle (59.8 vs. 72.5 kg). Dressed carcass yield was greater (P < 0.01) for Z than C cattle (63.5 vs. 61.6%). Cattle fed at M had less 12th rib s.c. fat, lower numerical U.S. yield grades (P < 0.01; M-1.71 cm and 3.3, A-2.46 cm and 4.3) and lower numerical Canadian yield grades (P < 0.01; 51.9 vs. 53.9% for M and A, respectively) than A cattle. Results indicate that energy intake level and Z supplementation influence live and carcass growth, carcass transfer, kill yields, and carcass characteristics across time.
Effects of castration and time-on-feed on Mertolenga breed beef quality.
Monteiro, A C G; Navas, D R; Lemos, J P C
2014-04-01
Physicochemical characteristics were determined in the longissimus lumborum muscle, after 8 days of ageing of steers (n=12) and bulls (n=12) from Mertolenga breed slaughtered directly from pasture (day 0) or after a finishing period of 50, 100 and 150 days in a feed-lot facility. Bulls and steers presented similar live weight (averaging 388 kg), carcass weight (CW; averaging 213 kg), dressing percentage (averaging 60%), carcass fatness (11.9% CW) and carcass fat thickness (averaging 3.03 mm). Live weight, CW, carcass fatness and fat thickness increased along time-on-feed. Gender only had a negligible effect on meat characteristics, with b and h being the only parameters of colour affected by gender, also presenting a significant interaction gender × time-on-feed. Nevertheless, both the genders presented a high-quality grade concerning tenderness (Warner-Bratzler shear force (WBSF)). L increased until 50 days on feed and decreased afterwards, whereas a and C values increased along time-on-feed. Pigment content was also affected by time-on-feed and showed a gender × time-on-feed interaction. Beef colour became darker and redder along time-on-feed, but still in a colour range highly acceptable by Portuguese consumers. Despite the increase in intramuscular fat and myofibrillar fragmentation index, as well as the decrease in collagen content of steers and bulls along time-on-feed, it did not affect the tenderness/hardness, indicating a small effect of time-on-feed in meat characteristics. Despite only small differences in carcass characteristics and meat-quality parameters that have been noticed along time-on-feed, those differences were only significant after 100 days on feed. Principal component analysis (PCA) was performed. The first PC axis (39.6% of the total variance) included colour variables a, b and C, and carcass fatness, fat thickness, CW and live weight, whereas the second one (12.7% of the total variance) included h, cooking losses and dressing-out. The principal component (PC) analysis confirmed the lack of differences between bulls and steers and indicates a differentiation of the first two periods of feeding (0 and 50 days on feed) from the two latter (100 and 150 days on feed) periods of feeding.
Escherichia coli O157:H7 in beef cattle: on farm contamination and pre-slaughter control methods.
Soon, J M; Chadd, S A; Baines, R N
2011-12-01
This paper addresses food safety in beef cattle production, with particular emphasis on factors that affect the prevalence of Escherichia coli O157:H7 in beef cattle and on control methods that have been investigated. Product recalls and foodborne diseases due to this organism continue to occur even though control measures have been under investigation for over 20 years. Most meatborne outbreaks are due to improper food handling practices and consumption of undercooked meat. However, the majority of pathogenic bacteria that can spread at slaughter by cross-contamination can be traced back to the farm rather than originating from the slaughter plant. This would ideally require the adoption of rigorous on-farm intervention strategies to mitigate risks at the farm level. On-farm strategies to control and reduce E. coli O157:H7 at the farm level will reduce the risk of carcass contamination at slaughter and processing facilities although they will not eliminate E. coli O157:H7. The most successful strategy for reducing the risk of contamination of beef and beef products will involve the implementation of both pre- and post-harvest measures.
Sañudo, C; Alfonso, M; Sánchez, A; Delfa, R; Teixeira, A
2000-09-01
Ninety commercial lamb carcasses were analysed according to the four different fat classes in the light lamb European classification system. Shoulder fat increased 3%, muscle decreased 2% and bone decreased 1% for each class increase. No significant differences were found among fat classes regarding pH, WHC, cooking losses, juiciness, myoglobin content, meat colour measured immediately after cutting (L*, a*, b*), odour intensity or flavour quality. Some differences were found in colour evolution through ageing. Shear force decreased and tenderness and flavour intensity increased with fat class but this effect was only significant in the leanest animals.
Failure of photoperiod to alter body growth and carcass composition in beef steers.
Zinn, S A; Chapin, L T; Enright, W J; Tucker, H A
1989-05-01
In each of two experiments, 70 crossbred steers were blocked by BW and assigned to initial slaughter groups or to treatments in a 2 x 2 design. In Exp. 1, treatments were 168 d of photoperiod (8 h of light [L]:16 h of dark [D] or 16L:8D) and plane of nutrition (high energy [HPN] or low energy [LPN]). On d -22, 67 and 155, blood was sampled every 20 min for 8 h. Relative to LPN, HPN increased (P less than .01) ADG by 28%, carcass weight by 26% and accretion of carcass fat by 109% and carcass protein by 20%. On d 155, compared with LPN, HPN increased (P less than .01) serum insulin (INS; 1.09 vs .64 ng/ml) and lowered (P less than .05) growth hormone (GH; 2.14 vs 3.70 ng/ml), but prolactin was not affected. Photoperiod did not affect BW gains, carcass composition or serum hormones. In Exp. 2, treatments were 113 d of photoperiod (8L:16D or 16L:8D) and Synovex-S implant (presence [IMP] or absence [NONIMP]). On d 93, blood was sampled every 30 min for 10 h. Relative to NONIMP, IMP increased (P less than .01) ADG by 12% and accretion of carcass protein by 16%. Implants did not affect carcass weight or accretion of fat. Compared with NONIMP, IMP increased (P less than .05) GH (3.16 vs 2.39 ng/ml) and INS (.68 vs .46 ng/ml) but did not affect PRL. Photoperiod did not affect BW gain, carcass composition or serum hormones. We conclude that photoperiod fails to influence growth and carcass composition of steers.
Olvera, Adib; Signorini, Marcelo; Tarabla, Héctor
2010-06-01
Quantify contamination by verotoxin-producing Escherichia coli associated with hemolytic uremic syndrome (VTEC-HUS) in cattle carcasses and generate estimates of exposure in three likely scenarios. A model was constructed of the frequency and magnitude of VTEC-HUS contamination from primary production to the removal of the carcasses from cold storage, based on the published scientific information, epidemiological data, and information from local experts. The probability distributions that best described each step in the process and scenarios were input to the @Risk program with multiple simulations using Monte Carlo analysis. Pearson s correlation test was used for the sensitivity analysis. The estimated frequency of carcasses with VTEC-HUS was 0.37 (95% CI: 0.26 to 0.58) and the final load of VTEC-HUS was 0.47 log CFU/carcass (95% CI: -2.46 to 3.62). The most closely related variables were the fattening system (r = -0.681) and the theoretical concentration of VTEC-HUS on the cattle's skin (r = 0.702). Vaccinating the animals reduced the frequency of VTEC-HUS in the carcasses by 54.1%, although there were no significant changes in the final VTEC-HUS load. Washing the carcasses reduced the final load by 0.42 log CFU/carcass compared with the baseline model, without any change in the frequency. A 50%-60% increase in the percentage of animals fattened in pens would increase the frequency of carcasses contaminated with VTEC-HUS by 15%-23%. Vaccinating the animals was the most effective scenario for reducing introduction of the bacteria in the beef production chain. Intensifying livestock production will increase the public health risk due to greater exposure to VTEC-HUS.
Elder, R O; Keen, J E; Siragusa, G R; Barkocy-Gallagher, G A; Koohmaraie, M; Laegreid, W W
2000-03-28
A survey was performed to estimate the frequency of enterohemorrhagic Escherichia coli O157:H7 or O157:nonmotile (EHEC O157) in feces and on hides within groups of fed cattle from single sources (lots) presented for slaughter at meat processing plants in the Midwestern United States, as well as frequency of carcass contamination during processing from cattle within the same lots. Of 29 lots sampled, 72% had at least one EHEC O157-positive fecal sample and 38% had positive hide samples. Overall, EHEC O157 prevalence in feces and on hides was 28% (91 of 327) and 11% (38 of 355), respectively. Carcass samples were taken at three points during processing: preevisceration, postevisceration before antimicrobial intervention, and postprocessing after carcasses entered the cooler. Of 30 lots sampled, 87% had at least one EHEC O157-positive preevisceration sample, 57% of lots were positive postevisceration, and 17% had positive postprocessing samples. Prevalence of EHEC O157 in the three postprocessing samples was 43% (148 of 341), 18% (59 of 332) and 2% (6 of 330), respectively. Reduction in carcass prevalence from preevisceration to postprocessing suggests that sanitary procedures were effective within the processing plants. Fecal and hide prevalence were significantly correlated with carcass contamination (P = 0.001), indicating a role for control of EHEC O157 in live cattle.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-28
... persons to submit comments on this document. Comments may be submitted by one of the following methods... very low (less than one percent), and this carcass sampling was expensive for the Agency. As stated in.... Following the implementation of PR/HACCP, FSIS analyzed only one pathogen per sample. Then, in 2008, FSIS...
25. Photographic copy of undated photo; Photographer unknown; Original in ...
25. Photographic copy of undated photo; Photographer unknown; Original in Rath collection at Iowa State University Libraries, Ames, Iowa; Filed under: Rath Packing Company, Printed Photographs, Symbol M, Box 2; REMOVING HIDES ON THE SKINNING TABLE; CARCASSES IN HALF-HOIST POSITION; LOOKING SOUTH - Rath Packing Company, Beef Killing Building, Sycamore Street between Elm & Eighteenth Streets, Waterloo, Black Hawk County, IA
Code of Federal Regulations, 2014 CFR
2014-01-01
... Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY... goats, meat food products in animal casings, and other products as approved by the Administrator, shall... lieu thereof. EC11SE91.000 For application to sheep carcasses, the loins and ribs of pork, beef tails...
Code of Federal Regulations, 2013 CFR
2013-01-01
... Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY... goats, meat food products in animal casings, and other products as approved by the Administrator, shall... lieu thereof. EC11SE91.000 For application to sheep carcasses, the loins and ribs of pork, beef tails...
Code of Federal Regulations, 2011 CFR
2011-01-01
... Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY... goats, meat food products in animal casings, and other products as approved by the Administrator, shall... lieu thereof. EC11SE91.000 For application to sheep carcasses, the loins and ribs of pork, beef tails...
Code of Federal Regulations, 2012 CFR
2012-01-01
... Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY... goats, meat food products in animal casings, and other products as approved by the Administrator, shall... lieu thereof. EC11SE91.000 For application to sheep carcasses, the loins and ribs of pork, beef tails...
USDA-ARS?s Scientific Manuscript database
With the high cost of feed for animal production, genetic selection for animals that metabolize feed more efficiently could result in substantial cost savings for cattle producers. The purpose of this study was to identify DNA markers predictive for differences among cattle for traits associated wit...
Airborne Salmonella and Listeria associated with Irish commercial beef, sheep and pig plants.
Okraszewska-Lasica, Wioletta; Bolton, D J; Sheridan, J J; McDowell, D A
2014-06-01
Air samples from lairage, hide/fleece pulling or dehairing/scraping, evisceration and chilling areas in commercial beef, sheep and pig plants were examined for Salmonella spp. and Listeria monocytogenes, by impaction or sedimentation onto selective (Brilliant Green Agar, BSA; Listeria Selective Agar, LSA) and non-selective (Plate Count Agar, PCA) media. Both pathogens were frequently detected in all three plants. Improved recoveries were achieved by combining sedimentation, and broth based resuscitation, suggesting cell injury. Salmonella were recovered from all three plants, with the highest counts on BGA in the pig plant. The most common serotypes were S. Typhimurium in the beef/sheep plants and S. Derby in the pig plant. Very low counts of L. monocytogenes (e.g. 2.6CFUm(2)) were detected at hide removal on LSA sedimentation plates in the beef plant. These included serogroup 1/2a-3a and 1/2b-3b-7. Pathogen counts in the three plants were generally very low, suggesting that air is unlikely to be a significant source of carcass or plant surface contamination. Copyright © 2014 Elsevier Ltd. All rights reserved.
Ekong, Pius S; Sanderson, Michael W; Cernicchiaro, Natalia
2015-09-01
Systematic review (SR) and meta-analyses (MA) methodologies were used to identify, critically evaluate and synthesize prevalence and concentration estimates for Escherichia coli O157 contamination along the beef production chain, and to illustrate differences based on cattle types and seasonality in North America from the scientific peer-reviewed literature. Four electronic databases were searched to identify relevant articles. Two independent reviewers performed all SR steps. Random effects MA models were used to estimate the pooled prevalence and concentration of E. coli O157 in feces, hides and carcasses of cattle processed in North America, including their seasonal estimates. The potential sources of between studies heterogeneity were identified using meta-regression and sub-group analysis. Results indicated differences in the fecal prevalence of E. coli O157 among cattle types: 10.68% (95% CI: 9.17-12.28%) in fed beef, 4.65% (95% CI: 3.37-6.10%) in adult beef, and 1.79% (95% CI: 1.20-2.48%) in adult dairy. Fed beef fecal prevalence was 10.65% (95% CI: 8.93-12.49%) during summer and 9.17% (95% CI: 5.24-13.98%) during the winter months. For adult beef, the fecal prevalence was 7.86% (95% CI: 5.43-10.66%) during summer, and 4.21% (95% CI: 1.95-7.13%) during winter. Among adult dairy, the fecal prevalence was 2.27% (95% CI: 1.5-3.18%) during summer, and 0.36% (95% CI: 0.09-0.74%) during winter. There was a significantly higher percentage of hides with E. coli O157 concentration ≥ 40 CFU/100 cm(2) on hides of fed beef sampled at the processing plant (23.81%; 95% CI: 14.79-34.15%) compared to those sampled at the feedlot (1.74%; 95% CI: 0.53-3.44%). Prevalence of E. coli O157 on carcass surfaces differed by season only at the post-evisceration stage, but decreased considerably through the subsequent processing stages. Country, study setting, detection method, hide swab area, and study design were identified as significant sources of heterogeneity among studies reporting prevalence of E. coli O157 along the beef production chain. The pooled prevalence and concentration estimates from this study provide a sound and reliable microbiological basis for risk assessment modeling of E. coli O157 and other pathogens in the food chain. Copyright © 2015 Elsevier B.V. All rights reserved.
Carcass classification in suckling lambs. Discrimination ability of the European Union scale.
Miguel, E; Onega, E; Cañeque, V; Velasco, S; Díaz, M T; Lauzurica, S; Pérez, C; Blázquez, B; Ruiz de Huidobro, F
2003-01-01
Forty-nine Manchega suckling lambs were used in this trial. Lambs were slaughtered at 10, 12 and 14 kg liveweight (cold carcass weight lower than 13 kg). The degree of fatness was assessed by three assessors on colour photographs of the carcasses, using the European Union scale for light lambs (EU), and another new scale developed in our laboratory (Suckling Lamb scale, SL). Carcass degree of fatness was reassessed using the same scales divided into 0.25 point-intervals (EUI, SLI). Carcasses were allocated into four groups by means of a tree classification algorithm (cluster analysis), according to 27 variates, namely muscle percentage, whole fat percentage, subcutaneous fat, intermuscular fat, kidney knob and channel fat percentage and muscle percentage, both in the carcass and in three joints (leg, best end neck plus loin, and shoulder). SL scale groups showed a higher number of variates well correlated to assessors' scoring than EU scale groups. Nevertheless, the EU scale showed significant between-groups differences in a higher number of variates (P<0.01). Using 0.25-points interval scales, EUI scale scoring was the best correlated to tissue composition. However, most variates were better correlated to dorsal fat thickness measurement (4 cm back from last rib and 4 cm from the carcass midline) than to assessors' scoring. All four groups in the tree classification were statistically different from one another, but assessors only were able to detect differences between whole fat percentage in group 1 and the rest. These results suggest that it is possible to improve the photographic standards of the EU method by using a 0.25 points interval scale. In abattoir conditions, the new SL method (1.0 point intervals) proved to be better. Measure of dorsal fat thickness proved to be a very good predictor of carcass tissue composition, but it is a more expensive measure.
Including carbon emissions from deforestation in the carbon footprint of Brazilian beef.
Cederberg, Christel; Persson, U Martin; Neovius, Kristian; Molander, Sverker; Clift, Roland
2011-03-01
Effects of land use changes are starting to be included in estimates of life-cycle greenhouse gas (GHG) emissions, so-called carbon footprints (CFs), from food production. Their omission can lead to serious underestimates, particularly for meat. Here we estimate emissions from the conversion of forest to pasture in the Legal Amazon Region (LAR) of Brazil and present a model to distribute the emissions from deforestation over products and time subsequent to the land use change. Expansion of cattle ranching for beef production is a major cause of deforestation in the LAR. The carbon footprint of beef produced on newly deforested land is estimated at more than 700 kg CO(2)-equivalents per kg carcass weight if direct land use emissions are annualized over 20 years. This is orders of magnitude larger than the figure for beef production on established pasture on non-deforested land. While Brazilian beef exports have originated mainly from areas outside the LAR, i.e. from regions not subject to recent deforestation, we argue that increased production for export has been the key driver of the pasture expansion and deforestation in the LAR during the past decade and this should be reflected in the carbon footprint attributed to beef exports. We conclude that carbon footprint standards must include the more extended effects of land use changes to avoid giving misleading information to policy makers, retailers, and consumers.
USDA-ARS?s Scientific Manuscript database
Harvested feedstuffs are a major input cost for beef cattle production. The objective of this research was to evaluate the impacts of 2 levels of supplemental feed provided to cows during late gestation and 2 levels of feed provided to their sons during postweaning development on subsequent feedlot ...
USDA-ARS?s Scientific Manuscript database
Genetic marker effects and type of inheritance are estimated with poor precision when minor marker allele frequencies are low. A stable composite population (MARC III) was subjected to marker assisted selection for multiple years to equalize specific marker frequencies to 1) estimate effect size an...
Tricarico, J M; Abney, M D; Galyean, M L; Rivera, J D; Hanson, K C; McLeod, K R; Harmon, D L
2007-03-01
Three experiments were conducted to examine the effects of an Aspergillus oryzae extract containing alpha-amylase activity on performance and carcass characteristics of finishing beef cattle. In Exp. 1, 120 crossbred steers were used in a randomized complete block design to evaluate the effects of roughage source (alfalfa hay vs. cottonseed hulls) and supplemental alpha-amylase at 950 dextrinizing units (DU)/kg of DM. Significant roughage source x alpha-amylase interactions (P < 0.05) were observed for performance. In steers fed cottonseed hulls, supplemental alpha-amylase increased ADG through d 28 and 112 and tended (P < 0.15) to increase ADG in all other periods. The increases in ADG were related to increased DMI and efficiency of gain during the initial 28-d period but were primarily related to increased DMI as the feeding period progressed. Supplemental alpha-amylase increased (P = 0.02) the LM area across both roughage sources. In Exp. 2, 96 crossbred heifers were used in a randomized complete block design with a 2 x 3 factorial arrangement of treatments to evaluate the effects of corn processing (dry cracked vs. high moisture) and supplemental alpha-amylase concentration (0, 580, or 1,160 DU/kg of DM). Alpha-amylase supplementation increased DMI (P = 0.05) and ADG (P = 0.03) during the initial 28 d on feed and carcass-adjusted ADG (P = 0.04) across corn processing methods. Longissimus muscle area was greatest (quadratic effect, P = 0.04), and yield grade was least (quadratic effect, P = 0.02) in heifers fed 580 DU of alpha-amylase/kg of DM across corn processing methods. In Exp. 3, 56 crossbred steers were used in a randomized complete block design to evaluate the effects of supplemental alpha-amylase (930 DU/kg of DM) on performance when DMI was restricted to yield a programmed ADG. Alpha-amylase supplementation did not affect performance when DMI was restricted. We conclude that dietary alpha-amylase supplementation of finishing beef diets may result in increased ADG through increased DMI under certain dietary conditions and that further research is warranted to explain its mode of action and interactions with dietary ingredients.
Miller, S P; Wilton, J W; Pfeiffer, W C
1999-02-01
Effect of milk yield (MY) on biological efficiency and gross margin as an indicator of profit potential of beef production from birth to slaughter was determined. Data included 9 yr of spring-born single male calves. Biological efficiency was calculated as carcass weight/total feed energy intake, including nonlactating and lactating intakes of cow and creep and feedlot intakes of calf. Slaughter end point was finish constant at 9 mm of fat thickness. Gross margin was determined as returns minus feed costs. Three breeding systems were analyzed: purebred Hereford (HE), large rotational (LR), and small rotational (SR). Analyses were performed separately by breeding system when differences in the effect of MY among breeding systems were significant. Increased MY was associated with increased preweaning gain (P < .001), increased weight at start of feedlot trial (P < .001), and increased hot carcass weight (P < .05). No significant (P > .10) effect of MY on age at slaughter or on carcass weight per day of age at slaughter was found. Increased MY was associated with increased cow lactating energy intake (P < .10) and negatively associated with calf creep intake (P < .01). No effects of MY on intake of the cow during the nonlactating period, calf feedlot intake, or total feed intake were found. Increased MY was associated with a reduction in backfat thickness of the cow during the lactating period (P < .01) with no change in body weight. In the subsequent nonlactating period, increasing MY was associated with increased backfat thickness (P < .10) and body weight (P < .05). No effect of MY on change in backfat or weight of cow from calving to the end of the next nonlactating period was found. No effect of MY on biological efficiency to slaughter was detected. Milk yield was positively associated with gross margin from birth to slaughter (P < .05); results were similar when cow feed prices were reduced by 30%. Increased MY was associated with increased biological efficiency to weaning in HE (P < .01) and SR (P < .10), with no effect found in LR. When feeding cows to requirements, milk yield has a positive effect on the profit potential of beef production from birth to slaughter.
2011-01-01
Background In a previously reported genome-wide association study based on a high-density bovine SNP genotyping array, 8 SNP were nominally associated (P ≤ 0.003) with average daily gain (ADG) and 3 of these were also associated (P ≤ 0.002) with average daily feed intake (ADFI) in a population of crossbred beef cattle. The SNP were clustered in a 570 kb region around 38 Mb on the draft sequence of bovine chromosome 6 (BTA6), an interval containing several positional and functional candidate genes including the bovine LAP3, NCAPG, and LCORL genes. The goal of the present study was to develop and examine additional markers in this region to optimize the ability to distinguish favorable alleles, with potential to identify functional variation. Results Animals from the original study were genotyped for 47 SNP within or near the gene boundaries of the three candidate genes. Sixteen markers in the NCAPG-LCORL locus displayed significant association with both ADFI and ADG even after stringent correction for multiple testing (P ≤ 005). These markers were evaluated for their effects on meat and carcass traits. The alleles associated with higher ADFI and ADG were also associated with higher hot carcass weight (HCW) and ribeye area (REA), and lower adjusted fat thickness (AFT). A reduced set of markers was genotyped on a separate, crossbred population including genetic contributions from 14 beef cattle breeds. Two of the markers located within the LCORL gene locus remained significant for ADG (P ≤ 0.04). Conclusions Several markers within the NCAPG-LCORL locus were significantly associated with feed intake and body weight gain phenotypes. These markers were also associated with HCW, REA and AFT suggesting that they are involved with lean growth and reduced fat deposition. Additionally, the two markers significant for ADG in the validation population of animals may be more robust for the prediction of ADG and possibly the correlated trait ADFI, across multiple breeds and populations of cattle. PMID:22168586
Vipham, J L; Loneragan, G H; Guillen, L M; Brooks, J C; Johnson, B J; Pond, A; Pond, N; Brashears, M M
2015-12-01
Despite effective food safety interventions within abattoirs, Salmonella enterica remains a common contaminant of raw ground beef. Research has recently implicated peripheral lymph nodes (PLNs) as a potential route by which Salmonella contaminates ground beef. This study examined the efficacy of using Lactobacillus animalis (formerly designated Lactobacillus acidophilus; NP51) and Propionibacterium freudenreichii (NP24), at 10(9) cfu/head/day, as a direct-fed microbial (DFM) in feedlot cattle diets to control Salmonella within PLNs. Two studies were conducted in which cattle were randomly allocated into either control or DFM treatment groups. Diets of treated cattle were supplemented with 10(9) cfu/head/day of the DFM, while control groups received no DFM supplementation. During slaughter at abattoirs, one subiliac lymph node (SLN) per carcass was collected from 627 carcasses from one study and 99 carcasses from the second study. Lymph nodes were cultured to estimate the presence and concentration of Salmonella. In the first study, effects of DFM supplementation varied across slaughter days. On the first and second slaughter days, prevalence was reduced by 50% (P = 0.0072) and 31% (P = 0.0093), respectively. No significant difference was observed on slaughter day three (P = 0.1766). In the second study, Salmonella was 82% less likely (P = 0.008) to be recovered from SLNs of treatment cattle. While a greater relative risk reduction was observed in the latter study, absolute risk reductions were similar across studies. A significant reduction in the concentration of Salmonella in SLNs (P < 0.0001) on a cfu/g and cfu/node basis was also observed in cattle administered NP51 and NP24 in the first study; in the second study, too few quantifiable SLNs were observed to facilitate meaningful comparisons. The results indicate that NP51 and NP24 supplementation may aid in reducing the prevalence and concentration of Salmonella in SLNs and, therefore, serve as an effective control measure to reduce Salmonella in ground beef products. © 2015 Blackwell Verlag GmbH.
Effects of clay on fat necrosis and carcass characteristics in Japanese Black steers.
Oka, Akio; Iwamoto, Eiji; Tatsuda, Ken
2015-10-01
Twenty 10-month-old Japanese Black steers were used to evaluate the effects of clay on fat necrosis and carcass characteristics. Ten steers (Clay group) were fed the clay (50 g/day) during 10-30 months of age. The other 10 steers (Control group) were not fed it. There was no significant difference in body weight or average daily gain between the two groups (P > 0.05). The occurrence of fat necrotic mass in the Clay group (30%) was lower (P < 0.05) than that in the Control group (90%) at slaughter. The size of necrotic masses in the Clay group was smaller (P < 0.05) than that in the Control group. There was no significant difference in the marbling score, beef color, Longissimus muscle area or subcutaneous fat thickness between the two groups. These results suggest that the clay prevented the occurrence of fat necrosis and did not affect the carcass characteristics in Japanese Black steers. © 2015 Japanese Society of Animal Science.
Salmonella prevalence in bovine lymph nodes differs among feedyards.
Haneklaus, Ashley N; Harris, Kerri B; Griffin, Davey B; Edrington, Thomas S; Lucia, Lisa M; Savell, Jeffrey W
2012-06-01
Lymphatic tissue, specifically lymph nodes, is commonly incorporated into ground beef products as a component of lean trimmings. Salmonella and other pathogenic bacteria have been identified in bovine lymph nodes, which may impact compliance with the Salmonella performance standards for ground beef established by the U.S. Department of Agriculture. Although Salmonella prevalence has been examined among lymph nodes between animals, no data are currently available regarding feedyard origin of the cattle and Salmonella prevalence. Bovine lymph nodes (279 superficial cervical plus 28 iliofemoral = 307) were collected from beef carcasses at a commercial beef harvest and processing plant over a 3-month period and examined for the prevalence of Salmonella. Cattle processed were from seven feedyards (A through G). Salmonella prevalence was exceptionally low (0% of samples were positive ) in cattle from feedyard A and high (88.2%) in cattle from feedyard B. Prevalence in the remaining feedyards ranged widely: 40.0% in feedyard C, 4.0% in feedyard D, 24.0% in feedyard E, 42.9% in feedyard F, and 40.0% in feedyard G. These data indicate the range of differences in Salmonella prevalence among feedyards. Such information may be useful for developing interventions to reduce or eliminate Salmonella from bovine lymph nodes, which would assist in the reduction of Salmonella in ground beef.
Effects of DGAT1 gene on meat and carcass fatness quality in Chinese commercial cattle.
Yuan, Zhengrong; Li, Junya; Li, Jiao; Gao, Xue; Gao, Huijiang; Xu, Shangzhong
2013-02-01
This study was designed to investigate the candidate single nucleotide polymorphisms (SNPs) in the exon's region of bovine diacylglycerol O-acyltransferase (DGAT1) gene using bioinformatics and experimental methods. A total of 17 SNPs were screened from public data resources and DNA sequencing. Three SNPs (c.572A>G, c.1241C>T and c.1416T>G) of these candidate SNPs were genotyped by created restriction site-polymerase chain reaction (CRS-PCR) methods. The gene-specific SNP markers and their effects on meat and carcass fatness quality traits were evaluated in Chinese commercial cattle. The c.572A>G and c.1416T>G significantly effected on backfat thickness, longissimus muscle area, marbling score, fat color and Warner-Bratzler shear force. No significant association was detected between the c.1241C>T and measured traits. Results from this study suggested that the SNP markers may be effective for the marker-assisted selection of meat and carcass fatness quality traits, and added new evidence that DGAT1 gene is an important candidate gene for the improvement of meat and carcass fatness quality in beef cattle industry.
Mpamhanga, C J; Wotton, S B
2015-09-01
This study compared normal post-Jarvis stun/kill responses and carcass quality with those occurring when crush restraint was not used during pre-slaughter. The carcasses of 1065 cattle slaughtered during one week at a commercial abattoir were evaluated for quality. The post-stun/kill responses of 788 of these animals were also assessed. An additional study of data from the carcasses of 6061 cattle was further evaluated for quality findings. A significant reduction in post-stun/kill limb movement, muscle tone and the expression of brainstem functions was recorded when restraint was not used. Abolishing crush restraint pre-slaughter also produced a significant reduction in the incidence of blood splash. In addition, the study also showed that animal identification post-slaughter could be successfully implemented with no negative consequences to food safety or traceability. It is suggested that abolishing the use of pre-slaughter crush restraint of cattle would enhance animal welfare and operator safety in plants whether electrical, or mechanical stunning was employed. Copyright © 2015. Published by Elsevier Ltd.
Chaves, Byron D; Echeverry, Alejandro; García, Lyda G; Brashears, M Todd; Miller, Markus F; Brashears, Mindy M
2015-12-01
The prevalence of potentially positive Shiga toxin-producing Escherichia coli (STEC) bovine hides and carcasses in three abattoirs in Costa Rica was estimated. Two export facilities (A and B) and one non-export establishment (C) were visited during the dry and rainy seasons of 2013. Swabs of hides pre-eviscerated and treated (180-220 peroxyacetic acid spray) carcasses were tested for the potential presence of STEC serogroups O26, O45, O103, O111, O121, and O145. The prevalence on hides during the rainy season was 86.7, 96.7 and 96.7% for facilities A, B, and C, respectively. During the dry season, the prevalence on hides was significantly lower in plants A and B (40% and 26.7%, respectively), but was marginally associated with the season in plant C (76.7%, P=0.0523). The prevalence of non-O157 STEC markers on treated carcasses was low (0 to 3.3%), suggesting that all plants were effective in minimizing the target non-O157 STEC in beef destined for export and for domestic consumption. Copyright © 2015 Elsevier Ltd. All rights reserved.
Creep feeding nursing beef calves.
Lardy, Gregory P; Maddock, Travis D
2007-03-01
Creep feeding can be used to increase calf weaning weights. However, the gain efficiency of free-choice, energy-based creep feeds is relatively poor. Generally, limit-feeding, high-protein creep feeds are more efficient, and gains may be similar to those produced by creep feeds offered free choice. Creep feeding can increase total organic matter intake and improve the overall energy status of the animal. Creep-fed calves tend to acclimate to the feedlot more smoothly than unsupplemented calves. Furthermore, provision of a high-starch creep feed may have a positive influence on subsequent carcass quality traits. Creep feeding can be applied to numerous environmental situations to maximize calf performance; however, beef cattle producers should consider their individual situations carefully before making the decision to creep feed.
Determining beef carcass retail product and fat yields within 1 hour postmortem.
Apple, J K; Dikeman, M E; Cundiff, L V; Wise, J W
1991-12-01
Hot carcasses from 220 steers (progeny of Hereford or Angus dams mated to Angus, Charolais, Galloway, Gelbvieh, Hereford, Longhorn, Nellore, Piedmontese, Pinzgauer, Salers, or Shorthorn sires) were used to develop equations to estimate weights and percentages of retail product (RP) and trimmable fat (TF) yields. Independent variables examined were 1) 12-13th rib fat probe (12RFD), 2) 10-11th rib fat probe (10RFD), 3) external fat score (EFS), 4) percentage of internal fat estimated hot (H%KPH), 5) hindquarter muscling score (HQMS), and 6) hot carcass weight (HCW). Right sides of the carcasses were fabricated into boneless retail cuts, trimmed to .76 cm of subcutaneous and visible intermuscular fat, and weighed. Cuts were trimmed to 0 cm of subcutaneous and visible intermuscular fat and reweighed. Multiple linear regression equations containing 12RFD, EFS, H%KPH, and HCW accounted for 95 and 89% of the variation in weight of total RP at .76 and 0 cm of fat trim, respectively. When weights of RP from the four primal cuts (.76 and 0 cm of fat trim) were the dependent variables, equations consisting of 12RFD, EFS, H%KPH, and HCW accounted for 93 to 84% of the variation. Hot carcass equations accounted for 83% of the variation in weight of total TF at both .76 and 0 cm of fat trim. Furthermore, equations from hot carcass data accounted for 54 and 51% of the variation in percentage of total RP and 57 and 50% of the variation in percentage of RP from the four primal cuts at .76 and 0 cm of fat trim, respectively. Hot carcass prediction equations accounted for 72% of the variation in percentage of total TF at both fat trim levels. Hot carcass equations were equivalent or superior to equations formulated from chilled carcass traits.
10. DETAIL OF CONDEMNED MATERIAL CHUTE IN NORTHWEST CORNER OF ...
10. DETAIL OF CONDEMNED MATERIAL CHUTE IN NORTHWEST CORNER OF 4TH LEVEL; GOVERNMENT INSPECTORS COULD CONDEMN DISEASED OR CONTAMINATED CARCASSES AT ANY POINT DURING THE DISASSEMBLY PROCESS; CONDEMNED MATERIAL WAS 'SIDETRACKED,' WEIGHED, AND DROPPED THROUGH THE CHUTE INTO A HUGE CHOPPER ON LEVEL 3; NOTE SCALE ON OVERHEAD CONVEYOR RAIL - Rath Packing Company, Beef Killing Building, Sycamore Street between Elm & Eighteenth Streets, Waterloo, Black Hawk County, IA
USDA-ARS?s Scientific Manuscript database
Background: In a previously reported genome-wide association study based on a high-density bovine SNP genotyping array, 8 SNP were nominally associated (P=0.003) with average daily gain (ADG) and 3 of these were also associated (P=0.002) with average daily feed intake (ADFI) in a population of c...
Protocol for evaluating the efficacy of cetylpyridinium chloride as a beef hide intervention.
Bosilevac, Joseph M; Wheeler, Tommy L; Rivera-Betancourt, Mildred; Nou, Xiangwu; Arthur, Terrance M; Shackelford, Steven D; Kent, Matthew P; Jaroni, Divya; Osborn, Matthew S; Rossman, Michelle; Reagan, James O; Koohmaraie, Mohammad
2004-02-01
The objective of this study was to establish the necessary protocols and assess the efficacy of cetylpyridinium chloride (CPC) as an antimicrobial intervention on beef cattle hides. Experiments using CPC were conducted to determine (i) the methods of neutralization needed to obtain valid efficacy measurements, (ii) the effect of concentration and dwell time after treatment, (iii) the effect of CPC on hide and carcass microbial populations when cattle were treated at a feedlot and then transported to a processing facility for harvest, and (iv) the effectiveness of spray pressure and two-spray combinations of CPC and water to reduce hide microbial populations. Residual CPC in hide sponge samples prevented bacterial growth. Dey-Engley neutralization media at 7.8% and a centrifugation step were necessary to overcome this problem. All dwell times, ranging from 30 s to 4 h, after 1% CPC application to cattle hides resulted in aerobic plate counts and Enterobacteriaceae counts 1.5 log CFU/100 cm2 lower than controls. The most effective dose of CPC was 1%, which reduced aerobic plate counts and Enterobacteriaceae counts 2 and 1 log CFU/100 cm2, respectively. Low-pressure application of 1% CPC at the feedlot, transport to the processing facility, and harvest within 5 h of application resulted in no effect on Escherichia coli O157 prevalence on hides or preevisceration carcasses. Two high-pressure CPC washes lowered aerobic plate counts and Enterobacteriaceae counts by 4 log CFU/100 cm2, and two medium-pressure CPC washes were only slightly less effective. These results indicate that under the proper conditions, CPC may still be effective for reducing microbial populations on cattle hides. Further study is warranted to determine if this effect will result in reduction of hide-to-carcass contamination during processing.
Castro, T; Cabezas, A; De la Fuente, J; Isabel, B; Manso, T; Jimeno, V
2016-03-01
Enhancing the quality of beef meat is an important goal in terms of improving both the nutritional value for the consumer and the commercial value for producers. The aim of this work was to study the effects of different vegetable oil supplements on growth performance, carcass quality and meat quality in beef steers reared under intensive conditions. A total of 240 Blonde D' Aquitaine steers (average BW=293.7±38.88 kg) were grouped into 24 batches (10 steers/batch) and were randomly assigned to one of the three dietary treatments (eight batches per treatment), each supplemented with either 4% hydrogenated palm oil (PALM) or fatty acids (FAs) from olive oil (OLI) or soybean oil (SOY). No differences in growth performance or carcass quality were observed. For the meat quality analysis, a steer was randomly selected from each batch and the 6th rib on the left half of the carcass was dissected. PALM meat had the highest percentage of 16:0 (P<0.05) and the lowest n-6/n-3 polyunsaturated fatty acids (PUFA) ratio (P<0.05), OLI had the highest content of t11-18:1 (P<0.01) and c9,t11-18:2 (P<0.05) and SOY showed the lowest value of monounsaturated fatty acids (MUFA) (P<0.001), the highest percentage of PUFA (P<0.01) and a lower index of atherogenicity (P=0.07) than PALM. No significant differences in the sensory characteristics of the meat were noted. However, the results of the principal component analysis of meat characteristics enabled meat from those steers that consumed fatty acids from olive oil to be differentiated from that of steers that consumed soybean oil.
Rius-Vilarrasa, E; Bünger, L; Maltin, C; Matthews, K R; Roehe, R
2009-05-01
The Meat and Livestock Commission's (MLC) EUROP classification based scheme and Video Image Analysis (VIA) system were compared in their ability to predict weights of primal carcass joints. A total of 443 commercial lamb carcasses under 12 months of age and mixed gender were selected by their cold carcass weight (CCW), conformation and fat scores. Lamb carcasses were classified for conformation and fatness, scanned by the VIA system and dissected into primal joints of leg, chump, loin, breast and shoulder. After adjustment for CCW, the estimation of primal joints using MLC EUROP scores showed high coefficients of determination (R(2)) in the range of 0.82-0.99. The use of VIA always resulted in equal or higher R(2). The precision measured as root mean square error (RMSE) was 27% (leg), 13% (chump), 1% (loin), 11% (breast), 5% (shoulders) and 13% (total primals) higher using VIA than MLC carcass information. Adjustment for slaughter day and gender effects indicated that estimations of primal joints using MLC EUROP scores were more sensitive to these factors than using VIA. This was consistent with an increase in stability of the prediction model of 28%, 11%, 2%, 12%, 6% and 14% for leg, chump, loin, breast and shoulder and total primals, respectively, using VIA compared to MLC EUROP scores. Consequently, VIA was capable of improving the prediction of primal meat yields compared to the current MLC EUROP carcass classification scheme used in the UK abattoirs.
Factor affecting the whole beef prices in eight provinces in Sumatera, Indonesia
NASA Astrophysics Data System (ADS)
Yasin, D.; Harahap, A. A.; Syaputra, M. A.; Mulianda, R.; Adha, T. J.; Harahap, A. S.; Rusdhi, A.; Ibarahim, M. S.; Siregar, A. R.; Purwadi, B.; Ginting, S. P.; Hasnudi; Henuk, Y. L.
2018-02-01
A survey has been conducted to study the fluctuation of whole beef prices in eight provinces in Sumatera, namely Lampung. South Sumatera. Jambi. Bengkulu. West Sumatera. Riau. North Sumatera. and NAD with the average cattle weight were 486kg. 492kg. 448kg. 464kg. 500kg. 480kg. 500kg. and 480kg. respectively. Their average prices and total price in these cities were IDR4.1000 & IDR19.926.000; IDR41.500 & IDR20.418.000; IDR43.000 & 19.264.000; IDR42.500 & IDR19.720.000; IDR43.000 & IDR21.500.000; IDR43.000 & IDR20.640.000; IDR42.500 & IDR21.250.000; IDR44.000 & IDR21.120.000.respectively. People West Sumatera, Riau and North Sumatra provinces prefer the final results of processed by products of beef which caused the high price of processed by products from cattle. Whereas, in NAD province. the meat selling price is very high compared to other provinces, while the selling price of processed beef by-products is much cheaper than the people outside NAD province. The selling price of processed beef by-product can not help to reduce the selling price of meat. Average carcass in Sumatera ranged from 49.00% (North Sumatera) - 51.00% (Jambi). Among the eigth provinces, the price of beef in Aceh is more expensive than other provinces not only in Sumatera. but also other provinces in Indonesia.
Lee, Michelle K; Billington, Stephen J; Joens, Lynn A
2004-01-01
Infection in humans with Campylobacter jejuni is commonly associated with exposure to food animal fecal material. In this study, we report on the recovery, potential for virulence and antimicrobial resistance levels of C. jejuni isolated from food and companion animals. Three hundred and seventy-eight fecal samples from food and companion animals and surface swabs from beef carcasses were tested for the presence of C. jejuni. C. jejuni was isolated from 13.8% (11/80) of dogs, 5% (1/20) of goats, 28.3% (17/60) of dairy cattle, 0% (0/65) of range cattle, 73.5% (36/49) of feedlot cattle, and 94.7% (18/19) of beef carcasses. Beef cattle from a single Arizona herd showed a considerable increase in fecal shedding of C. jejuni from pasture to feedlot and over time on the feedlot. Forty-two isolates were tested for susceptibility to four antimicrobial agents, each representing a class of antimicrobial drug approved for use in both humans and animals. None of the isolates were found to be resistant to erythromycin or gentamicin, whereas 2.4% of isolates were resistant to ciprofloxacin and 28.6% of isolates were resistant to tetracycline. The presence of virulence traits among the 42 isolates was assessed using in vitro macrophage survival and epithelial cell adherence and invasion assays. Of the isolates examined, 17 were able to survive within macrophages through 72 h at viable counts of >/=10(3)/well and 12 were capable of invading epithelial cells at viable counts of >/=10(3)/well. Data from these studies suggests that many of the isolates recovered from the non-poultry animal sources have the capacity to cause disease if transmitted to humans.
Beef customer satisfaction: trained sensory panel ratings and Warner-Bratzler shear force values.
Lorenzen, C L; Miller, R K; Taylors, J F; Neely, T R; Tatum, J D; Wise, J W; Buyek, M J; Reagan, J O; Savell, J W
2003-01-01
Trained sensory panel ratings and Warner-Bratzler shear force (WBS) values from the Beef Customer Satisfaction study are reported. Carcasses were chosen to fit into USDA quality grades of Top Choice (upper two-thirds of USDA Choice), Low Choice, High Select, and Low Select. A trained, descriptive attribute panel evaluated top loin, top sirloin, and top round steaks for muscle fiber tenderness, connective tissue amount, overall tenderness, juiciness, flavor intensity, cooked beef flavor intensity, and cooked beef fat flavor intensity. Four steaks from each of the three cuts from each carcass were assigned randomly to one of four cooking endpoint temperature treatments (60, 65, 70, or 75 degrees C) for WBS determination. For all trained panel measures of tenderness and WBS, regardless of USDA quality grade, top loin steaks were rated higher than top sirloin steaks, which were rated higher than top round steaks (P < 0.05). There were significant interactions between USDA quality grade and cut for most of the trained sensory panel traits: USDA quality grade influenced ratings for top loin steaks more than ratings for top round steaks or top sirloin steaks. Three interactions were significant for WBS values: USDA quality grade x endpoint temperature (P = 0.02), USDA quality grade x cut (P = 0.0007), and cut x endpoint temperature (P = 0.0001). With the exception of High Select, WBS values increased (P < 0.05) for each grade with increasing endpoint temperature. Choice top loin and top round steaks had lower (P < 0.05) WBS values than Select steaks of the same cut; however, only Top Choice top sirloin steaks differed (P < 0.05) from the other USDA grades. As endpoint temperatures increased, WBS values for top sirloin steaks increased substantially compared to the other cuts. When cooked to 60 degrees C, top sirloin steaks were closer to top loin steaks in WBS values, when cooked to 75 degrees C, top sirloin steaks were closer to top round steaks in WBS values. Simple correlation coefficients between consumer ratings and trained sensory muscle fiber tenderness, connective tissue amount, overall tenderness, juiciness, flavor intensity, and cooked beef fat flavor were significant (P < 0.05), but values were low. While relationships exist between consumer and trained sensory measures, it is difficult to predict from objective data how consumers will rate meat at home.
Weber, K L; Thallman, R M; Keele, J W; Snelling, W M; Bennett, G L; Smith, T P L; McDaneld, T G; Allan, M F; Van Eenennaam, A L; Kuehn, L A
2012-12-01
Genomic selection involves the assessment of genetic merit through prediction equations that allocate genetic variation with dense marker genotypes. It has the potential to provide accurate breeding values for selection candidates at an early age and facilitate selection for expensive or difficult to measure traits. Accurate across-breed prediction would allow genomic selection to be applied on a larger scale in the beef industry, but the limited availability of large populations for the development of prediction equations has delayed researchers from providing genomic predictions that are accurate across multiple beef breeds. In this study, the accuracy of genomic predictions for 6 growth and carcass traits were derived and evaluated using 2 multibreed beef cattle populations: 3,358 crossbred cattle of the U.S. Meat Animal Research Center Germplasm Evaluation Program (USMARC_GPE) and 1,834 high accuracy bull sires of the 2,000 Bull Project (2000_BULL) representing influential breeds in the U.S. beef cattle industry. The 2000_BULL EPD were deregressed, scaled, and weighted to adjust for between- and within-breed heterogeneous variance before use in training and validation. Molecular breeding values (MBV) trained in each multibreed population and in Angus and Hereford purebred sires of 2000_BULL were derived using the GenSel BayesCπ function (Fernando and Garrick, 2009) and cross-validated. Less than 10% of large effect loci were shared between prediction equations trained on (USMARC_GPE) relative to 2000_BULL although locus effects were moderately to highly correlated for most traits and the traits themselves were highly correlated between populations. Prediction of MBV accuracy was low and variable between populations. For growth traits, MBV accounted for up to 18% of genetic variation in a pooled, multibreed analysis and up to 28% in single breeds. For carcass traits, MBV explained up to 8% of genetic variation in a pooled, multibreed analysis and up to 42% in single breeds. Prediction equations trained in multibreed populations were more accurate for Angus and Hereford subpopulations because those were the breeds most highly represented in the training populations. Accuracies were less for prediction equations trained in a single breed due to the smaller number of records derived from a single breed in the training populations.
Modelling of beef sensory quality for a better prediction of palatability.
Hocquette, Jean-François; Van Wezemael, Lynn; Chriki, Sghaier; Legrand, Isabelle; Verbeke, Wim; Farmer, Linda; Scollan, Nigel D; Polkinghorne, Rod; Rødbotten, Rune; Allen, Paul; Pethick, David W
2014-07-01
Despite efforts by the industry to control the eating quality of beef, there remains a high level of variability in palatability, which is one reason for consumer dissatisfaction. In Europe, there is still no reliable on-line tool to predict beef quality and deliver consistent quality beef to consumers. Beef quality traits depend in part on the physical and chemical properties of the muscles. The determination of these properties (known as muscle profiling) will allow for more informed decisions to be made in the selection of individual muscles for the production of value-added products. Therefore, scientists and professional partners of the ProSafeBeef project have brought together all the data they have accumulated over 20 years. The resulting BIF-Beef (Integrated and Functional Biology of Beef) data warehouse contains available data of animal growth, carcass composition, muscle tissue characteristics and beef quality traits. This database is useful to determine the most important muscle characteristics associated with a high tenderness, a high flavour or generally a high quality. Another more consumer driven modelling tool was developed in Australia: the Meat Standards Australia (MSA) grading scheme that predicts beef quality for each individual muscle×specific cooking method combination using various information on the corresponding animals and post-slaughter processing factors. This system has also the potential to detect variability in quality within muscles. The MSA system proved to be effective in predicting beef palatability not only in Australia but also in many other countries. The results of the work conducted in Europe within the ProSafeBeef project indicate that it would be possible to manage a grading system in Europe similar to the MSA system. The combination of the different modelling approaches (namely muscle biochemistry and a MSA-like meat grading system adapted to the European market) is a promising area of research to improve the prediction of beef quality. In both approaches, the volume of data available not only provides statistically sound correlations between various factors and beef quality traits but also a better understanding of the variability of beef quality according to various criteria (breed, age, sex, pH, marbling etc.). © 2013 The American Meat Science Association. All rights reserved.
Gallo, L; Sturaro, E; Bittante, G
2017-04-01
Beef production from cull cows is an additional source of income for dairy farms and greatly contributes to red meat production, but the sources of variation of live animal characteristics and the carcass traits of cull cows have rarely been examined. This study investigated the effects of the farm type, breed, age at slaughter (AGE) and calving to culling interval (Calv_Cull) on the body traits and carcass characteristics of dairy and dual-purpose cull cows. Data from 555 cull cows from 182 herds belonging to five farm types, characterised by a combination of housing and feeding systems, were recorded and analysed. Dairy breeds, such as Holstein Friesian and Brown Swiss, and dual-purpose breeds (Simmental, Rendena) were included in the trait assessments. The day before slaughter, the cows were weighed and scored for body condition (BCS) and fleshiness, and then, their heart girth and wither height were measured. At the slaughterhouse, the carcass weight (CW), dressing percentage (DP), carcass conformation and fatness scores, carcass price per kg and carcass total value were obtained. On average, the cows were slaughtered at nearly 71±27 months of age, 285±187 days after the last calving; 615±95 kg BW; and provided a 257±51 kg CW. Nearly 50% of the cows fell within the BCS range of 2.75 to 3.50, and the carcasses were mostly graded in the lowest class of conformation and fatness scores. Cull cows from free-stall farms had a higher DP, carcass conformation score and price than those from traditional tie-stall farms. The breed influenced the AGE, live animal characteristics and carcass traits. Cows from dairy breeds were younger at slaughter, had a lower BCS and fleshiness, and greater body measurements, but a lower DP and carcass price than those from dual-purpose breeds, although differences between the breeds were found within both groups. The age of the cows at slaughter influenced the Calv_Cull and increased the BW, body measurements and CW, but not the fleshiness and fatness appreciation (both in vivo and postmortem) or carcass price. The increasing Calv_Cull improved the BW, BCS, fleshiness, CW and carcass conformation and fatness. In conclusion, the decision to cull dairy cows should also take into account the factors that affect their carcass value in regards to improving the carcass price of cows.
USDA-ARS?s Scientific Manuscript database
Effects of varying bulk densities of steam-flaked corn (SFC) and level of inclusion of roughage in feedlot diets were evaluated in three experiments. In Experiment 1, 128 beef steers were used in a 2 x 2 factorial arrangement to evaluate effects of bulk density of SFC (335 or 386 g/L) and roughage...
Strategies for On-Line Decontamination of Carcasses
NASA Astrophysics Data System (ADS)
Byelashov, Oleksandr A.; Sofos, John N.
Microbial food safety has been one of the most important challenges for the meat industry during the last two decades due to important foodborne outbreaks traced to contaminated products and associated costly product recalls from the market. Escherichia coli O157:H7 and other non-O157 Shiga toxin-producing (STEC) strains, as well as Salmonella serotypes, Campylobacter jejuni, Clostridium perfringens, Clostridium botulinum, Listeria monocytogenes, Staphylococcus aureus, Yersinia enterocolitica, Aeromonas hydrophila, and Bacillus cereusare important pathogenic contaminants of meat and poultry products (Sofos, 2004a). STEC, especially, have been of major concern for the beef industry for a number of years, since for almost two decades contaminated beef products have been major sources of foodborne E. coli O157:H7 infection (Rangel, Sparling, Crowe, Griffin, & Swerdlow, 2005).
Polymorphisms of RDH16 and VEGFR1 influence M. trapezius steatosis in Japanese Black carcass.
Ishida, Takafumi; Noda, Kosuke; Jomane, Fortune Ntengwa; Tokunaga, Tadaaki
2017-08-01
The exact cause of steatosis, one of defects in Japanese beef carcasses, has not been elucidated to date, because it is very difficult to diagnose cyclopedically with certain reproducibility due to the bias in the outbreak. Therefore, the objective of this study was to assess the influence of polymorphisms in retinol dehydrogenase 16 (RDH16), myoferlin (MYOF) and vascular endothelial growth factor receptors 1 and 2 (VEGFR1, VEGFR2) on carcass-graded Musculus trapezius steatosis. For logistic regression analysis, 646 carcasses shipped from 29 farms in Miyazaki, Japan, were used. The GG genotype in RDH16 showed significant odds ratios against AA and AG. In VEGFR1, CT had a significant odds ratio against CC. After evaluating for interaction, highly significant odds ratios were observed in the combinations that included the GG risk genotype in RDH16. It is noteworthy that there was no steatosis in the combination GG (RDH16) and CC (VEGFR1). It may be concluded that there is a possibility that steatosis can be suppressed by the CC genotype in VEGFR1. The current study revealed the influence of genetic polymorphisms on M. trapezius steatosis that had not been reported until now, and may help elucidate the cause of steatosis. © 2016 Japanese Society of Animal Science.
Factors influencing intermuscular fat and other measures of beef chuck composition.
Christensen, K L; Johnson, D D; West, R L; Hargrove, D D; Marshall, T T; Rogers, A L
1991-11-01
Carcasses from 59 steers produced from the mating of Braford, Simbrah, Senepol, and Simmental bulls to Brahman- and Romana Red-sired cows and Brahman bulls mated to Angus cows were used in this study. Effects of sire breed and feeding calves vs yearlings on fat depots in the chuck, when steers were fed to 1.0 cm external fat, were determined. Breed of sire and feeding calves vs yearlings had no effect (P greater than .05) on percentage of intermuscular fat. However, carcasses from Braford-sired steers had a higher (P less than .05) percentage of dissectable subcutaneous fat on the chuck than did those from other breed groups. Carcasses from Simmental-sired steers were superior (P less than .05) to those from Braford-sired steers in USDA yield grade and had a higher average marbling score (P less than .05) than the Simbrah-sired group. Estimated kidney, pelvic, and heart (KPH) fat was higher (P less than .05) in carcasses from Brahman-, Simbrah-, and Senepol-sired steers than in Braford-sired steers. Steers fed as calves had higher percentages (P less than .05) of KPH fat and major chuck muscles than did those fed as yearlings. The best single predictor of percentage of intermuscular fat within the chuck was adjusted fat over the ribeye (R2 = .46).
Brashears, M M; Galyean, M L; Loneragan, G H; Mann, J E; Killinger-Mann, K
2003-05-01
Fecal shedding of Escherichia coli O157:H7, the prevalence of Escherichia coli O157:H7 in pens and on carcasses and hides, and cattle performance as a result of daily dietary supplementation with Lactobacillus-based direct-fed microbials (DFMs) were evaluated in a feeding trial involving 180 beef steers. Steers were evaluated for shedding of E. coli O157:H7 by an immunomagnetic separation technique on arrival at the feedlot, just before treatment with the DFMs, and every 14 days thereafter until slaughter. Composite pen fecal samples were collected every 14 days (alternating weeks with animal testing), and prevalence on hides and carcasses at slaughter was also evaluated. Feedlot performance (body weight gain and feed intake) was measured for the period during which the DFMs were fed. Gain efficiency was calculated as the ratio of weight gain to feed intake. Lactobacillus acidophilus NPC 747 decreased (P < 0.01) the shedding of E. coli O157:H7 in the feces of individual cattle during the feeding period. E. coli O157:H7 was approximately twice as likely to be detected in control animal samples as in samples from animals receiving L. acidophilus NPC 747. In addition, DFM supplementation decreased (P < 0.05) the number of E. coli O157:H7-positive hide samples at harvest and the number of pens testing positive for the pathogen. Body weight gains (on a live or carcass basis) and feed intakes during the DFM supplementation period did not differ among treatments. Gain efficiencies on a live-weight basis did not differ among treatments, but carcass-based gain/feed ratios tended (P < 0.06) to be better for animals receiving the two DFM treatments than for control animals. The results of this study suggest that the feeding of a Lactobacillus-based DFM to cattle will decrease, but not eliminate, fecal shedding of E. coli O157:H7, as well as contamination on hides, without detrimental effects on performance.
Mateescu, R G; Oltenacu, P A; Garmyn, A J; Mafi, G G; VanOverbeke, D L
2016-05-01
Product quality is a high priority for the beef industry because of its importance as a major driver of consumer demand for beef and the ability of the industry to improve it. A 2-prong approach based on implementation of a genetic program to improve eating quality and a system to communicate eating quality and increase the probability that consumers' eating quality expectations are met is outlined. The objectives of this study were 1) to identify the best carcass and meat composition traits to be used in a selection program to improve eating quality and 2) to develop a relatively small number of classes that reflect real and perceptible differences in eating quality that can be communicated to consumers and identify a subset of carcass and meat composition traits with the highest predictive accuracy across all eating quality classes. Carcass traits, meat composition, including Warner-Bratzler shear force (WBSF), intramuscular fat content (IMFC), trained sensory panel scores, and mineral composition traits of 1,666 Angus cattle were used in this study. Three eating quality indexes, EATQ1, EATQ2, and EATQ3, were generated by using different weights for the sensory traits (emphasis on tenderness, flavor, and juiciness, respectively). The best model for predicting eating quality explained 37%, 9%, and 19% of the variability of EATQ1, EATQ2, and EATQ3, and 2 traits, WBSF and IMFC, accounted for most of the variability explained by the best models. EATQ1 combines tenderness, juiciness, and flavor assessed by trained panels with 0.60, 0.15, and 0.25 weights, best describes North American consumers, and has a moderate heritability (0.18 ± 0.06). A selection index (I= -0.5[WBSF] + 0.3[IMFC]) based on phenotypic and genetic variances and covariances can be used to improve eating quality as a correlated trait. The 3 indexes (EATQ1, EATQ2, and EATQ3) were used to generate 3 equal (33.3%) low, medium, and high eating quality classes, and linear combinations of traits that best predict class membership were estimated using a predictive discriminant analysis. The best predictive model to classify new observations into low, medium, and high eating quality classes defined by the EATQ1 index included WBSF, IMFC, HCW, and marbling score and resulted in a total error rate of 47.06%, much lower than the 60.74% error rate when the prediction of class membership was based on the USDA grading system. The 2 best predictors were WBSF and IMFC, and they accounted for 97.2% of the variability explained by the best model.
Gentry, W W; Weiss, C P; Meredith, C M; McCollum, F T; Cole, N A; Jennings, J S
2016-11-01
Roughage is typically mechanically processed to increase digestibility and improve handling and mixing characteristics in beef cattle finishing diets. Roughage is fed to promote ruminal health and decrease digestive upset, but inclusion in finishing diets is limited due to the cost per unit of energy. Rumination behavior may be a means to standardize roughage in beef cattle finishing diets, and increasing particle size of roughage may allow a decrease in roughage inclusion without sacrificing animal performance. Therefore, the objectives of this study were to quantify rumination time for a finishing beef animal and to evaluate the effects of corn stalk (CS) inclusion rate and particle size on rumination behavior, animal performance, and carcass characteristics. Fifty-one individually fed steers (385 ± 3.6 kg initial BW) were used in a randomized complete block design feeding study. Corn stalks were passed through a tub grinder equipped with a 7.62-cm screen once to generate long-grind CS (LG-CS) or twice to generate short-grind CS (SG-CS). Dietary treatments were based on steam-flaked corn and included, on a DM basis, 30% wet corn gluten feed (WCGF) with 5% SG-CS (5SG), 30% WCGF with 5% LG-CS (5LG), and 25% WCGF with 10% SG-CS (10SG). The Penn State Particle Separator was used to separate ingredients and treatment diets and to estimate physically effective NDF (peNDF). On d 70, each steer was fitted with a collar (HR Tag; SCR Dairy, Netanya, Isreal), which continuously measured rumination minutes via a sensory microphone. Long-grind CS contained more ( < 0.01) peNDF than SG-CS, and the 10SG diet contained more ( = 0.03) peNDF than the 5LG and 5SG diets. Dry matter intake was greatest ( = 0.03) for steers consuming 5LG and least for steers consuming 10SG, with cattle consuming 5SG being intermediate. Carcass-adjusted ADG and G:F were greatest ( ≤ 0.03) for steers consuming 5LG and 5SG compared with steers consuming 10SG. Hot carcass weight tended ( = 0.10) to be greatest for steers consuming 5LG and least for steers consuming 10SG, with steers consuming 5SG being intermediate. Dressing percent was greater ( = 0.01) for steers consuming 5LG and 5SG than for steers consuming 10SG. A significant interaction ( < 0.01) occurred for rumination minutes × day. Rumination (min/day) were greatest ( = 0.01) for steers consuming 10SG followed by steers consuming 5LG and was lowest for steers consuming 5SG. Increasing particle size of roughage may be a means to decrease roughage inclusion rate while maintaining rumination and performance.
Nkrumah, J D; Crews, D H; Basarab, J A; Price, M A; Okine, E K; Wang, Z; Li, C; Moore, S S
2007-10-01
Feeding behavior and temperament may be useful in genetic evaluations either as indicator traits for other economically relevant traits or because the behavior traits may have a direct economic value. We determined the variation in feeding behavior and temperament of beef cattle sired by Angus, Charolais, or Hybrid bulls and evaluated their associations with performance, efficiency, and carcass merit. The behavior traits were daily feeding duration, feeding head down (HD) time, feeding frequency (FF), and flight speed (FS, as a measure of temperament). A pedigree file of 813 animals forming 28 paternal half-sib families with about 20 progeny per sire was used. Performance, feeding behavior, and efficiency records were available on 464 animals of which 381 and 302 had records on carcass merit and flight speed, respectively. Large SE reflect the number of animals used. Direct heritability estimates were 0.28 +/- 0.12 for feeding duration, 0.33 +/- 0.12 for HD, 0.38 +/- 0.13 for FF, and 0.49 +/- 0.18 for FS. Feeding duration had a weak positive genetic (r(g)) correlation with HD (r(g) = 0.25 +/- 0.32) and FS (r(g) = 0.42 +/- 0.26) but a moderate negative genetic correlation with FF (r(g) = -0.40 +/- 0.30). Feeding duration had positive phenotypic (r(p)) and genetic correlations with DMI (r(p) = 0.27; r(g) = 0.56 +/- 0.20) and residual feed intake (RFI; r(p) = 0.49; r(g) = 0.57 +/- 0.28) but was unrelated phenotypically with feed conversion ratio [FCR; which is the reciprocal of the efficiency of growth (G:F)]. Feeding duration was negatively correlated with FCR (r(g) = -0.25 +/- 0.29). Feeding frequency had a moderate to high negative genetic correlation with DMI (r(g) = -0.74 +/- 0.15), FCR (r(g) = -0.52 +/- 0.21), and RFI (r(g) = -0.77 +/- 0.21). Flight speed was negatively correlated phenotypically with DMI (r(p) = -0.35) but was unrelated phenotypically with FCR or RFI. On the other hand, FS had a weak negative genetic correlation with DMI (r(g) = -0.11 +/- 0.26), a moderate genetic correlation with FCR (r(g) = 0.40 +/- 0.26), and a negative genetic correlation with RFI (r(g) = -0.59 +/- 0.45). The results indicate that behavior traits may contribute to the variation in the efficiency of growth of beef cattle, and there are potential correlated responses to selection to improve efficiency. Feeding behavior and temperament may need to be included in the definition of beef cattle breeding goals, and approaches such as the culling of unmanageable cattle and the introduction of correct handling facilities or early life provision of appropriate experiences to improve handling will be useful.
Reuter, B J; Wulf, D M; Shanks, B C; Maddock, R J
2002-01-01
This study determined whether there is a logical point of value change, related to either tenderness or consumer acceptance, at which to separate the beef carcass within the rib/chuck region. Rib/chuck rolls (RCR); (n = 30) consisting of the ribeye roll and chuck eye roll subprimals (2nd through 12th rib locations) were cut into 22 steaks each (two steaks per rib location), and Warner-Bratzler shear force and consumer purchase preference were evaluated for steaks at each rib location. Steaks from different locations of the RCR were composed of differing proportions of several muscles: longissimus muscle (LM), spinalis dorsi and multifidus dorsi (SM), and complexus (CO). The LM (4th to 12th rib) contained three tenderness regions: 7th through 12th rib, 5th and 6th ribs, and 4th rib regions (lowest, intermediate, and highest shear force values, respectively; P < 0.01). Shear force differed (P < 0.05) among rib locations for the SM (2nd to 9th rib), but no logical pattern was evident. The CO (2nd to 7th rib) was more tender toward the anterior end (P < 0.05). The region of the RCR represented by the 4th through 6th rib locations had steaks with higher weighted-average shear force (average shear force of each steak, weighted for surface area of each muscle) values than the remainder of the RCR (P < 0.05). Animal-to-animal variation in shear force was 36% greater than rib-to-rib variation in shear force; thus, statistically significant differences in tenderness among rib locations may be undetectable by consumers. Steaks (n = 330) were offered for sale at a retail supermarket and case time was monitored on each steak to determine consumer purchase preference. Steaks from the 2nd through 4th rib locations required more time to sell (P < 0.01) than steaks from the 5th through 12th rib locations. Two alternative locations for the rib/chuck separation point could be between the 6th and 7th ribs, yielding a ribeye subprimal useful in marketing a "premium quality" product, or between the 4th and 5th ribs, which would yield four more 2.5-cm ribeye steaks per carcass.
Twomey, Alan J; Carroll, Rebecca I; Doherty, Michael L; Byrne, Noel; Graham, David A; Sayers, Riona G; Blom, Astrid; Berry, Donagh P
2018-03-06
Parasitic diseases have economic consequences in cattle production systems. Although breeding for parasite resistance can complement current control practices to reduce the prevalence globally, there is little knowledge of the implications of such a strategy on other performance traits. Records on individual animal antibody responses to Fasciola hepatica, Ostertagia ostertagi, and Neospora caninum were available from cows in 68 dairy herds (study herds); national abattoir data on F. hepatica-damaged livers were also available from dairy and beef cattle. After data edits, 9,271 dairy cows remained in the study herd dataset, whereas 19,542 dairy cows and 68,048 young dairy and beef animals had a record for the presence or absence of F. hepatica-damaged liver in the national dataset. Milk, reproductive, and carcass phenotypes were also available for a proportion of these animals as well as their contemporaries. Linear mixed models were used to estimate variance components of antibody responses to the three parasites; covariance components were estimated between the parasite phenotypes and economically important traits. Heritability of antibody responses to the different parasites, when treated as a continuous trait, ranged from 0.07 (O. ostertagi) to 0.13 (F. hepatica), whereas the coefficient of genetic variation ranged from 4% (O. ostertagi) to 20% (F. hepatica). The antibody response to N. caninum was genetically correlated with the antibody response to both F. hepatica (-0.29) and O. ostertagi (-0.67); a moderately positive genetic correlation existed between the antibody response to F. hepatica and O. ostertagi (0.66). Genetic correlations between the parasite phenotypes and the milk production traits were all close to zero (-0.14 to 0.10), as were the genetic correlations between F. hepatica-damaged livers and the carcass traits of carcass weight, conformation, and fat score evaluated in cows and young animals (0.00 to 0.16). The genetic correlation between F. hepatica-damaged livers in cows and milk somatic cell score was 0.32 (SE = 0.20). Antibody responses to F. hepatica and O. ostertagi had favorable genetic correlations with fertility traits, but conversely, antibody response to N. caninum and F. hepatica-damaged livers were unfavorably genetically correlated with fertility. This study provides the necessary information to undertake national multitrait genetic evaluations for parasite phenotypes.
Seasonal variation of carcass decomposition and gravesoil chemistry in a cold (Dfa) climate.
Meyer, Jessica; Anderson, Brianna; Carter, David O
2013-09-01
It is well known that temperature significantly affects corpse decomposition. Yet relatively few taphonomy studies investigate the effects of seasonality on decomposition. Here, we propose the use of the Köppen-Geiger climate classification system and describe the decomposition of swine (Sus scrofa domesticus) carcasses during the summer and winter near Lincoln, Nebraska, USA. Decomposition was scored, and gravesoil chemistry (total carbon, total nitrogen, ninhydrin-reactive nitrogen, ammonium, nitrate, and soil pH) was assessed. Gross carcass decomposition in summer was three to seven times greater than in winter. Initial significant changes in gravesoil chemistry occurred following approximately 320 accumulated degree days, regardless of season. Furthermore, significant (p < 0.05) correlations were observed between ammonium and pH (positive correlation) and between nitrate and pH (negative correlation). We hope that future decomposition studies employ the Köppen-Geiger climate classification system to understand the seasonality of corpse decomposition, to validate taphonomic methods, and to facilitate cross-climate comparisons of carcass decomposition. © 2013 American Academy of Forensic Sciences.
Decontamination formulations for disinfection and sterilization
Tucker, Mark D.; Engler, Daniel E.
2007-09-18
Aqueous decontamination formulations that neutralize biological pathogens for disinfection and sterilization applications. Examples of suitable applications include disinfection of food processing equipment, disinfection of areas containing livestock, mold remediation, sterilization of medical instruments and direct disinfection of food surfaces, such as beef carcasses. The formulations include at least one reactive compound, bleaching activator, inorganic base, and water. The formulations can be packaged as a two-part kit system, and can have a pH value in the range of 7-8.
Veasey, Shawnna; Muriana, Peter M.
2016-01-01
‘Electrolyzed water’ generators are readily available in the food industry as a renewable source of hypochlorous acid that eliminates the need for workers to handle hazardous hypochlorite concentrates. We applied electrolyzed water (EW) directly to multi-strain cocktails of Listeria monocytogenes, E. coli O157:H7, and Salmonella sp. at 250 ppm free available chlorine (FAC) and achieved greater than 6-log reductions in 2 min. Lower EW values were examined as antimicrobial interventions for fresh meat (beef carcasses), processed meats (frankfurters), and food contact surfaces (slicing blades). Little or no reduction relative to controls was observed when generic E. coli-inoculated beef carcasses or L. monocytogenes-inoculated frankfurters were showered with EW. Spray application of EW (25 and 250-ppm FAC) onto L. monocytogenes-inoculated slicing blades showed that greater reductions were obtained with ‘clean’ (3.6 and 5.7-log reduction) vs. ‘dirty’ (0.6 and 3.3-log reduction) slicing blades, respectively. Trials with L. monocytogenes-inoculated protein-EW solutions demonstrated that protein content as low as 0.1% is capable of eliminating FAC, reducing antimicrobial activity against L. monocytogenes. EW appears better positioned as a surface sanitizer with minimal organic material that can otherwise act as an effective reducing agent to the oxidizing solution rendering it ineffective. PMID:28231137
Alternative pre-rigor foreshank positioning can improve beef shoulder muscle tenderness.
Grayson, A L; Lawrence, T E
2013-09-01
Thirty beef carcasses were harvested and the foreshank of each side was independently positioned (cranial, natural, parallel, or caudal) 1h post-mortem to determine the effect of foreshank angle at rigor mortis on the sarcomere length and tenderness of six beef shoulder muscles. The infraspinatus (IS), pectoralis profundus (PP), serratus ventralis (SV), supraspinatus (SS), teres major (TM) and triceps brachii (TB) were excised 48 h post-mortem for Warner-Bratzler shear force (WBSF) and sarcomere length evaluations. All muscles except the SS had altered (P<0.05) sarcomere lengths between positions; the cranial position resulted in the longest sarcomeres for the SV and TB muscles whilst the natural position had longer sarcomeres for the PP and TM muscles. The SV from the cranial position had lower (P<0.05) shear than the caudal position and TB from the natural position had lower (P<0.05) shear than the parallel or caudal positions. Sarcomere length was moderately correlated (r=-0.63; P<0.01) to shear force. Copyright © 2013 Elsevier Ltd. All rights reserved.
Canto, Anna C V C S; Costa-Lima, Bruno R C; Suman, Surendranath P; Monteiro, Maria Lucia G; Viana, Fernanda M; Salim, Ana Paula A A; Nair, Mahesh N; Silva, Teofilo J P; Conte-Junior, Carlos A
2016-11-01
The influence of muscle source on color stability of fresh beef from purebred Bos indicus cattle was investigated. Longissimus lumborum (LL) and psoas major (PM) muscles obtained from twelve (n=12) Nellore bull carcasses (24h post-mortem) were fabricated into 2.54-cm steaks, aerobically packaged, and stored at 4°C for nine days. Steaks were analyzed on day 0 for proximate composition and myoglobin concentration, whereas pH, instrumental color, metmyoglobin reducing activity (MRA), lipid oxidation, and protein oxidation were evaluated on days 0, 3, 6, and 9. LL steaks exhibited greater (P<0.05) redness, color stability, and MRA than PM counterparts. On the other hand, PM steaks demonstrated greater (P<0.05) myoglobin content, lipid oxidation, and protein oxidation than LL steaks. These results indicated the critical influence of muscle source on discoloration of fresh beef from Bos indicus animals and suggested the necessity to engineer muscle-specific strategies to improve color stability and marketability of beef from Bos indicus cattle. Copyright © 2016 Elsevier Ltd. All rights reserved.
Shee, C N; Lemenager, R P; Schoonmaker, J P
2018-04-01
Feeding dried distillers grains with solubles (DDGS), a feed high in fat and protein, to lactating beef cows can alter milk production and composition, resulting in improved pre-weaning growth of progeny. This alteration in milk profile may consequently alter the growth and carcass composition of the offspring after weaning. Therefore, Angus×Simmental steers (n=48) whose dams were fed one of two diets supplemented with either DDGS or soybean meal (CON) from calving to mid-lactation were placed in a feedlot to determine the effects of maternal nutrition during lactation on progeny development and carcass composition. Cow-calf pairs were allotted to two treatments at birth based on cow and calf BW, breed and age. Maternal diets were isocaloric (3.97 MJ/kg NEg) and consisted of rye hay supplemented with DDGS at 1% of BW (19.4% CP; 8.76% fat) or rye hay and corn silage supplemented with CON (11.7% CP; 2.06% fat). After conclusion of the treatments at 129 days postpartum, cow-calf pairs were comingled and managed as one group until weaning at 219 days postpartum. Steers were then transitioned to a common diet composed of 60% DDGS, 34% corn silage and 6% vitamin/mineral supplement and were placed indoors in individual pens with slatted floors. An intravenous glucose tolerance test (IVGTT) was performed 134 days after feedlot entry on 16 steers (CON, n=7; DDGS, n=9) to determine the effect of maternal diet on glucose and insulin sensitivity. Steers were slaughtered at a target BW of 645 kg. Categorical and continuous data were analyzed using the GLIMMIX and MIXED procedures of SAS, respectively. Steers from DDGS dams tended to be heavier on day 85 of feedlot finishing (P=0.09) compared with steers from CON dams. However, there were no differences in final weight, average daily gain, dry matter intake or efficiency (gain:feed, P⩾0.18). Maternal treatments did not affect progeny days on feed (P=0.15), despite a mean difference of 9 days in favor of DDGS. Glucose and insulin concentrations and area under the curve of progeny as measured by IVGTT were not affected by maternal diet (P⩾0.16). Maternal DDGS supplementation decreased marbling score (P=0.04), but did not influence carcass grading percentage or any other carcass characteristic (P⩾0.17).
James, Andrew; Valarcher, Jean-François; Hagglünd, Sara; Raboisson, Didier; Rushton, Jonathan
2017-01-01
Concerns are growing over the impact of livestock farming on environment and public health. The livestock industry is faced with the double constraint of limiting its use of natural resources and antimicrobials while ensuring its economic sustainability. In this context, reliable methods are needed to evaluate the effect of the prevention of endemic animal diseases on the productivity of livestock production systems. In this study, an epidemiological and productivity model was used to link changes in Bovine Respiratory Disease (BRD) incidence with the productivity of the beef and dairy cattle sectors in France. Cattle production parameters significantly affected by BRD were selected through literature review. Previous field study results and national cattle performance estimates were used to infer growth performances, mortality rates and carcass quality in the cattle affected and not affected by BRD. A steady-state deterministic herd production model was used to predict the productivity of the dairy and beef sector and their defined compartments (breeding-fattening, feedlot young bulls, and feedlot veal) in case of BRD incidence reduction by 20%, 50% or 100%. Results suggested that BRD should be controlled at a priority in beef breeding farms as eradication of BRD in beef calves would increase the whole beef sector’s productivity by 4.7–5.5% while eradication in other production stages would result in lower productivity gain in their respective sectors. However, the analysis performed at compartment level showed that, in both the beef and dairy sector, young bull and veal feedlot enterprises derive more economic benefits from BRD eradication for their own compartment (increase in productivity of 8.7–12.8% for beef young bulls) than the breeding farms (increase in productivity of 5.1–6% for beef calves), which may limit the investments in BRD control. PMID:29206855
Rahmania, Halida; Sudjadi; Rohman, Abdul
2015-02-01
For Indonesian community, meatball is one of the favorite meat food products. In order to gain economical benefits, the substitution of beef meat with rat meat can happen due to the different prices between rat meat and beef. In this present research, the feasibility of FTIR spectroscopy in combination with multivariate calibration of partial least square (PLS) was used for the quantitative analysis of rat meat in the binary mixture of beef in meatball formulation. Meanwhile, the chemometrics of principal component analysis (PCA) was used for the classification between rat meat and beef meatballs. Some frequency regions in mid infrared region were optimized, and finally, the frequency region of 750-1000 cm(-1) was selected during PLS and PCA modeling.For quantitative analysis, the relationship between actual values (x-axis) and FTIR predicted values (y-axis) of rat meat is described by the equation of y= 0.9417x+ 2.8410 with coefficient of determination (R2) of 0.993, and root mean square error of calibration (RMSEC) of 1.79%. Furthermore, PCA was successfully used for the classification of rat meat meatball and beef meatball.
Buttrey, E K; Luebbe, M K; McCollum, F T; Cole, N A; MacDonald, J C; Hales, K E
2015-07-01
Forty-eight individually fed crossbred steers (initial BW = 381 ± 7.61 kg) were used to determine the effects of glycerin (GLY) concentration in steam-flaked corn (SFC)-based diets with added yellow grease on animal performance and carcass characteristics. Glycerin was included at 0, 2.5, 5, and 10% dietary DM replacing SFC. A completely randomized design was used with steers as the experimental unit, and the model included the fixed effects of diet. Contrast statements were used to determine linear and quadratic effects of GLY inclusion. Final BW and DMI were not affected (P > 0.27) by GLY concentration. Average daily gain and G:F based on live BW did not differ as GLY level increased in the diet from 0 to 10% of DM (P > 0.33). Carcass-adjusted final BW and carcass-adjusted G:F were also not affected by GLY concentration (P > 0.22); however, carcass-adjusted ADG tended to respond quadratically by decreasing from 2.5 to 5% GLY inclusion and increasing thereafter (P = 0.10). Calculated dietary NEm and NEg did not differ as GLY increased in the diet (P > 0.37). Hot carcass weight tended to respond quadratically, decreasing from 2.5 to 5% GLY and increasing thereafter (P = 0.10). Likewise, dressing percentage tended to respond quadratically by decreasing from 2.5 to 5% GLY inclusion and increasing to 10% GLY inclusion (P = 0.09). Fat thickness decreased linearly as GLY inclusion increased in the diet (P < 0.01); however, no differences were detected in marbling score and LM area (P > 0.21). Calculated yield grade (YG) decreased linearly as GLY increased in the diet from 0 to 10% of DM (P = 0.04). Based on our results, there was no animal performance benefit for replacing SFC with GLY in diets containing yellow grease, and the only change in carcass merit was a slight improvement in YG.
Chung, Chan Sung; Cho, Woong Ki; Jang, In Seok; Lee, Sung Sill; Moon, Yea Hwang
2017-01-01
Objective This study was conducted to compare growth performance, blood components and carcass traits by two feeding systems (concentrate with roughage separately [CON] vs total mixed ration [TMR]) in Hanwoo steers, and to learn the relationship between blood components during fattening or finishing phases and carcass traits in Hanwoo steers. Methods Sixty steers aged 8 months were allotted to two feeding systems and fed similar amounts of average dry matter and total digestible nutrient throughout whole experimental period according to each feeding program. Steers were weighed monthly, taken blood at the end of growing, fattening and finishing periods, and slaughtered at 30 month of age. Results Growing performance was higher (p<0.05) in the CON group compared to the TMR group during fattening and finishing periods. The CON group was lower (p<0.05) in blood aspartic acid transaminase, blood urea nitrogen and retinol levels during growing period, but higher in triglyceride and cholesterol levels during fattening and finishing periods compared to the TMR group. The CON group was greater (p<0.05) in rib-eye area, and lighter (p<0.05) red in meat color compared to the TMR group. In the correlation coefficients between blood components of steers and carcass traits, retinol had a negative (p<0.05) correlation with marbling score and rib-eye area. Leptin had a positive (p<0.05) correlation with back fat thickness. Blood cholesterol and triglyceride were positively (p<0.05) correlated with carcass weight and rib-eye area. Conclusion Growth performance, carcass ribeye area and meat color showed a more desirable result in the CON compared to the TMR in Hanwoo steers. Assessing the accumulated data of carcass traits with blood components including hormones—particularly retinol, cholesterol, triglyceride, and leptin—during the fattening or finishing phases, it may be possible to find a biomarker for determining beef quality in living animals. PMID:28669143
Smulders, F J M; Hiesberger, J; Hofbauer, P; Dögl, B; Dransfield, E
2006-09-01
Beef has a requirement for refrigerated storage up to 14 d to achieve adequate aging and a tender product. To achieve this aging with little spoilage and no surface drying, vacuum packaging is attractive, because it is inherently simple and offers a clear indication to the packer when the process has failed or there is risk of spoilage. However, there is increasing pressure on the meat industry to limit the use of packaging materials in view of their cost and the cost involved in their recovery and recycling. The purpose of this report was to evaluate an alternative storage system in containers using modified atmospheres at reduced pressure (approximately 25 kPa). The quality of the meat for both container- and vacuum-packed treatments was measured during chilled storage for up to 3 wk. Storage time had the most significant effect on quality characteristics, irrespective of the packaging method. Storage in containers under a 70%N2:30%CO2 gas mixture gave characteristics similar to beef stored under vacuum. Storage in containers under 100% CO2 produced less drip loss than under 70%N2:30%CO2, but generally container storage produced 3 times as much drip loss as vacuum packaging. Shear force of the LM was unaffected by the type of packaging, and at d 2 after slaughter (i.e., before the storage trial was begun), sarcomere lengths of muscles intended for container storage were similar to those destined for vacuum storage. During the packaging treatment, the comparison between the storage systems was always done within 1 animal using one carcass-half for container storage and the other half for vacuum packaging; all bulls were shackled from the left hindleg during bleeding. The majority of the muscles from the left sides had lower shear force values than those from the right sides at the earlier storage times (2 and 9 d after slaughter) but had similar values after longer storage (16 and 23 d after slaughter). This is the first report that shackling beef carcasses from the left side can result in more tender meat in the LM from that side. The increased tenderness in the LM from the shackled side probably resulted from an early decrease in pH and an increase in calpain activity after mechanical strain of the muscles on the shackled side. This effect of shackling should be taken into account when designing systematic comparisons of tenderness in beef.
Kadim, I T; Mahgoub, O; Purchas, R W
2008-11-01
The dromedary camel is a good source of meat especially in areas where the climate adversely affects the performance of other meat animals. This is because of its unique physiological characteristics, including a great tolerance to high temperatures, solar radiation, water scarcity, rough topography and poor vegetation. The average birth weight of camels is about 35kg, but it varies widely between regions, breeds and within the same breed. The meat producing ability of camels is limited by modest growth rates (500g/day). However, camels are mostly produced under traditional extensive systems on poor levels of nutrition and are mostly slaughtered at older ages after a career in work, racing or milk production. Camels reach live weights of about 650kg at 7-8 years of age, and produce carcass weights ranging from 125 to 400kg with dressing-out percentage values from 55% to 70%. Camel carcasses contain about 57% muscle, 26% bone and 17% fat with fore halves (cranial to rib 13) significantly heavier than the hind halves. Camel lean meat contains about 78% water, 19% protein, 3% fat, and 1.2% ash with a small amount of intramuscular fat, which renders it a healthy food for humans. Camel meat has been described as raspberry red to dark brown in colour and the fat of the camel meat is white. Camel meat is similar in taste and texture to beef. The amino acid and mineral contents of camel meat are often higher than beef, probably due to lower intramuscular fat levels. Recently, camel meat has been processed into burgers, patties, sausages and shawarma to add value. Future research efforts need to focus on exploiting the potential of the camel as a source of meat through multidisplinary research into efficient production systems, and improved meat technology and marketing.
Parr, S L; Chung, K Y; Hutcheson, J P; Nichols, W T; Yates, D A; Streeter, M N; Swingle, R S; Galyean, M L; Johnson, B J
2011-03-01
Four experiments evaluated the effect of implant dose and release pattern on performance and carcass traits of crossbred beef steers. In Exp. 1, steers (4 to 7 pens/treatment; initial BW = 315 kg) were fed an average of 174 d. Treatments were 1) no implant (NI); 2) Revalor-S [120 mg of trenbolone acetate (TBA) and 24 mg of estradiol 17β (E(2)); REV-S]; 3) Revalor-IS followed by REV-S (cumulatively 200 mg of TBA and 40 mg of E(2); reimplanted at 68 to 74 d; REV-IS/S); and 4) Revalor-XS (200 mg of TBA and 40 mg of E(2); REV-X). Carcass-adjusted final BW was greater (P < 0.05) for REV-X and REV-IS/S than for REV-S (610, 609, and 598 kg, respectively). Daily DMI did not differ (P > 0.10) among the 3 implants, but carcass-adjusted G:F was greater (P < 0.05) for REV-X and REV-IS/S than for REV-S (0.197 and 0.195 vs. 0.188). Both HCW and LM area were greater (P < 0.05) for REV-X and REV-IS/S than for REV-S. Marbling scores were greatest (P < 0.05) for REV-S and least (P < 0.05) for REV-IS/S; REV-X was intermediate to NI and REV-IS/S. In Exp. 2, steers (10 pens/treatment; initial BW = 391 kg) were fed 131 d, with treatments of REV-S, REV-IS/S (reimplanted at 44 to 47 d), and REV-X. Carcass-adjusted final BW (598 kg), ADG (1.6 kg), DMI (9.4 kg), G:F (0.17), and HCW did not differ (P > 0.10) among treatments. The percentage of Choice was less (P < 0.05) and percentage of Select greater (P < 0.05) for REV-IS/S than for REV-S and REV-X. In Exp. 3, steers (10 pens/treatment; initial BW = 277 kg) were fed 197 d and received either REV-IS/S (reimplanted at 90 to 103 d) or REV-X. Carcass-adjusted final BW (625 vs. 633 kg) and ADG (1.81 vs. 1.76 kg) were greater (P < 0.05) for REV-X-implanted steers. Daily DMI did not differ, but G:F tended (P < 0.10) to be increased and HCW was greater (P < 0.05) for REV-X than for REV-IS/S. In Exp. 4, steers (8 pens/treatment; initial BW = 238 kg) were fed 243 d and received either REV-IS/S (reimplanted at 68 to 71 d) or REV-X. Carcass-adjusted final BW (612 kg), ADG (1.54 kg), DMI (7.55), and G:F (0.21) did not differ (P > 0.10) for REV-IS/S and REV-X-implanted steers. Carcass traits did not differ among implants, but the percentage of Choice carcasses was greater (P < 0.05) and percentage of Select was less (P < 0.05) for REV-X than for REV-IS/S. These data indicate that when TBA/E(2) dose is equal, the altered release rate of REV-X can improve performance and quality grade, but these effects depend on duration of the feeding period and timing of initial and terminal implants.
Gui, Linsheng; Jiang, Bijie; Zhang, Yaran; Zan, Linsen
2015-03-15
Silent information regulator 6 (SIRT6) belongs to the family of class III nicotinamide adenine dinucleotide (NAD)-dependent deacetylase and plays an essential role in DNA repair and metabolism. This study was conducted to detect potential polymorphisms of the bovine SIRT6 gene and explore their relationships with body measurement and carcass quality in Qinchuan cattle. Four sequence variants (SVs) were identified in intron 6, exon 7, exon 9, and 3' UTR, via sequencing technology conducted in 468 individual Qinchuan cattle. Eleven different haplotypes were identified, of which two major haplotypes had a frequency of 45.7% (-CACT-) and 14.8% (-CGTC-). Three SVs (SV2, SV3 and SV4) were significantly associated with some of the body measurements and carcass quality traits (P<0.05 or P<0.01), and the H2H7 (CC-GA-TT-TC) diplotype had better performance than other combinations. Our results suggest that some polymorphisms in SIRT6 are associated with production traits and may be used as candidates for marker-assisted selection (MAS) and management in beef cattle breeding programs. Copyright © 2015 Elsevier B.V. All rights reserved.
Gagaoua, Mohammed; Picard, Brigitte; Monteils, Valérie
2018-06-01
This study investigated the effects of animal, carcass and muscle characteristics on initial color traits of steaks from 887 Charolais cattle. First, the fixed factors of year of birth, experiment and sex had strong impacts on color traits. From the covariates, increased age lead to intense color (low h*, -1.55 units) and darker and vivid meat (high a*, b* and C*: +4.56, +3.41 and +5.61, respectively). Increases in fatness score and carcass fat weight were associated with increases in a*, b* and C* (redness; +2.90 to +4.06 for a*; yellowness; +2.60 to +3.76 for b*; and vividness, +3.87 to +5.49 for C*) and a darker colored lean (L*; -1.56 to -3.23). As pH24h increased, a* (less red) and C* (less vivid) decreased (-3.06), whereas hue angle increased (+2.69) leading to poorer color. The selection of animals for high degree of muscularity or slaughter weight resulted in lighter and darker meat, respectively. The studied covariates could be used as indicators of Charolais beef color traits. Copyright © 2018 Elsevier Ltd. All rights reserved.
Keane, Michael P; McGee, Mark; O'Riordan, Edward G; Kelly, Alan K; Earley, Bernadette
2018-04-03
The objectives of the study were to determine whether allometric equations are suitable for estimating the space requirements of finishing beef cattle housed on concrete slatted floors (CSF) and to examine the effect of fixed and dynamic space allowances on the performance and welfare of these cattle. Continental crossbred steers [n = 120: mean initial live weight, 590 (SD 29.8) kg] were blocked by breed, weight, and age and assigned to 1 of 5 space allowance treatments (3 fixed and 2 dynamic) on CSF: 1) 2.0 m2 per animal, 2) 2.5 m2 per animal, 3) 3.0 m2 per animal, 4) Equation 1 (E1); y = 0.033w0.667, where y = m2 per animal and w = body weight, and 5) Equation 2 (E2); y = 0.048w0.667. The length of the feed face was 3.0 m for all treatments. Steers were offered grass silage and concentrates ad libitum. DMI was recorded weekly on a pen basis. Steers were weighed and dirt scored every 14 d. Blood samples were collected every 28 d, and analyzed for complete cell counts. Behavior was recorded using closed-circuit infrared cameras. Steers' hooves were inspected for lesions at the beginning of the study and post-slaughter. Slaughter weight and ADG were lowest, and feed conversion ratio (FCR) was poorest, for steers accommodated at 2.0 m2, and slaughter weight and ADG were greatest, and FCR was the best, for steers accommodated at E2 (P < 0.05); steers accommodated at 2.5 m2 were intermediate (P > 0.05) to those accommodated at 2.0 m2 and both 3.0 m2 and E1, whereas steers accommodated at 3.0 m2 and E1 were intermediate (P > 0.05) to 2.5 m2 and E2. Carcass weight of steers housed at 2.0 m2 was lower (P < 0.05) than all other treatments. Steers housed at 2.5 m2 had lower carcass weights (P < 0.05) than those with accommodated at E1 and E2, whereas the carcass weight of steers accommodated at 3.0 m2 was intermediate. Carcass fat scores and hide weights were lower (P < 0.05) in steers accommodated at 2.0 m2 than those housed at E2 with other treatments being intermediate. The number of steers lying at any one time and the number of steers observed grooming themselves was lower (P < 0.05) at 2.0 m2 than any other treatment. Dirt scores, hoof lesion number, and hematological measurements were not affected by treatment. It was concluded that 2.0 m2 per animal was an insufficient space allowance for housing finishing beef steers and that the equation y = 0.033w0.667 is sufficient for estimating the space required by finishing beef cattle housed on CSF.
Kadhum, H J; Ball, H J; Oswald, E; Rowe, M T
2006-08-01
Swabs collected from pig, lamb and beef carcasses and samples of pork, lamb and beef mince were cultured for Escherichia coli strains. Strains harbouring cytotoxic necrotizing factors (CNF1 and 2) and cytolethal distending toxins (CDT-I,-II,-III and -IV) were identified in plate cultures of the isolates by colony hybridization with labelled probes and multiplex PCR assays. Simplex and multiplex PCR assays were used to further characterize the isolates to determine the presence of P, S and F17 fimbriae as well as afimbrial adhesins and haemolysin. The serotype was also determined where possible. Thirty strains with the capacity to code for CNF (4), CDT (24) or both (2) were isolated and characterized, and a wide range of associated factor patterns was observed. The methods utilized were successful in demonstrating the detection of viable strains with potentially significant pathogenic factors from human food sources.
Murphy, V S; Lowe, D E; Lively, F O; Gordon, A W
2018-05-01
The aim of this study was to evaluate the effect of using different floor types to accommodate growing and finishing beef cattle on their performance, cleanliness, carcass characteristics and meat quality. In total, 80 dairy origin young bulls (mean initial live weight 224 kg (SD=28.4 kg)) were divided into 20 blocks with four animals each according to live weight. The total duration of the experimental period was 204 days. The first 101 days was defined as the growing period, with the remainder of the study defined as the finishing period. Cattle were randomly assigned within blocks to one of four floor type treatments, which included fully slatted flooring throughout the entire experimental period (CS); fully slatted flooring covered with rubber strips throughout the entire experimental period (RS); fully slatted flooring during the growing period and moved to a solid floor covered with straw bedding during the finishing period (CS-S) and fully slatted flooring during the growing period and moved to fully slatted flooring covered with rubber strips during the finishing period (CS-RS). Bulls were offered ad libitum grass silage supplemented with concentrates during the growing period. During the finishing period, bulls were offered concentrates supplemented with chopped barley straw. There was no significant effect of floor type on total dry matter intake (DMI), feed conversion ratio, daily live weight gain or back fat depth during the growing and finishing periods. Compared with bulls accommodated on CS, RS and CS-RS, bulls accommodated on CS-S had a significantly lower straw DMI (P<0.01). Although bulls accommodated on CS and CS-S were significantly dirtier compared with those accommodated on RS and CS-RS on days 50 (P<0.05) and 151 (P<0.01), there was no effect of floor type on the cleanliness of bulls at the end of the growing and finishing periods. There was also no significant effect of floor type on carcass characteristics or meat quality. However, bulls accommodated on CS-S had a tendency for less channel, cod and kidney fat (P=0.084) compared with those accommodated on CS, RS and CS-RS. Overall, floor type had no effect on the performance, cleanliness, carcass characteristics or meat quality of growing or finishing beef cattle.
Economic values and selection index in different Angus-Nellore cross-bred production systems.
Fernandes, G M; Savegnago, R P; El Faro, L; Mosaquatro Roso, V; de Paz, C C P
2018-06-01
Bioeconomic models were developed to calculate economic values (EV) for economically important traits in beef cattle, to evaluate the impact of these traits on production profitability, to assess possible market changes with a payment system and to develop economic selection indexes for Angus cattle for two production systems. Two beef cattle production systems were simulated as follows: a cow-calf cycle (CC) and a complete cycle (CoC). Following selection, positive changes in the EV were observed. In the CC, each 1.0% increment in weaning weight (WW), weaning rate (WR) and pregnancy rate (PR) resulted in increases in US$ 1.30, US$ 3.68 and US$ 3.55 per cow/year in profit, respectively. In the CoC, EV of US$ 1.01, US$ 1.79, US$ 1.19, US$ 1.34, US$ 6.84 and US$ 7.86 per cow/year were obtained for WW, year weight, yearling weight, final weight, WR and PR, respectively. The payment system for carcass quality showed that the scenario considering that 100% of the animals displayed uniform carcasses exhibited the highest EV and was considered optimal. Considering the sensitivity analysis, the price paid per animal was the factor that most affected the EV in both systems. The selection indexes obtained may be used in similar production systems, and the use of EV and selection indexes are important tools for any production system with positive change in profit after selection. © 2018 Blackwell Verlag GmbH.
Njisane, Yonela Zifikile; Muchenje, Voster
2017-01-01
The current review seeks to highlight the concerns that have been raised on pre-slaughter stress, contributing factors and its consequent effects on cattle behavioural responses and the quality of beef; inter-linking the activities involved from birth to slaughter. Such information is crucial in light of the consumer concerns on overall animal welfare, quality of meat and food security. Slaughter animals are exposed to different conditions during production and transportation to abattoirs on a daily basis. However; the majority of studies that have been done previously singled out different environments in the meat production chain, while conclusions have been made that the welfare of slaughter animals and the quality of meat harvested from them is dependent on the whole chain. Behaviour is a critical component used to evaluate the animals’ wellbeing and it has been reported to have an effect on product quality. Apart from the influence of on-farm, transportation and abattoir conditions, the genetic background of the animal also affects how it perceives and responds to certain encounters. Stress activates the animals’ hypothalamic-pituitary-adrenal activity, triggering release of various stress hormones such as catecholamines and cortisol, thus glycogen depletion prior slaughter, elevated ultimate pH and poor muscle-meat conversion. Pre-slaughter stress sometimes results to cattle attaining bruises, resulting to the affected parts of the carcass being trimmed and condemned for human consumption, downgrading of the carcass and thus profit losses. PMID:27608639
Njisane, Yonela Zifikile; Muchenje, Voster
2017-06-01
The current review seeks to highlight the concerns that have been raised on pre-slaughter stress, contributing factors and its consequent effects on cattle behavioural responses and the quality of beef; inter-linking the activities involved from birth to slaughter. Such information is crucial in light of the consumer concerns on overall animal welfare, quality of meat and food security. Slaughter animals are exposed to different conditions during production and transportation to abattoirs on a daily basis. However; the majority of studies that have been done previously singled out different environments in the meat production chain, while conclusions have been made that the welfare of slaughter animals and the quality of meat harvested from them is dependent on the whole chain. Behaviour is a critical component used to evaluate the animals' wellbeing and it has been reported to have an effect on product quality. Apart from the influence of on-farm, transportation and abattoir conditions, the genetic background of the animal also affects how it perceives and responds to certain encounters. Stress activates the animals' hypothalamic-pituitary-adrenal activity, triggering release of various stress hormones such as catecholamines and cortisol, thus glycogen depletion prior slaughter, elevated ultimate pH and poor muscle-meat conversion. Pre-slaughter stress sometimes results to cattle attaining bruises, resulting to the affected parts of the carcass being trimmed and condemned for human consumption, downgrading of the carcass and thus profit losses.
Varona, L; Moreno, C; Altarriba, J
2012-06-01
Survival or longevity is an economically relevant trait in cattle. However, it is not currently included in cattle selection criteria because of the delayed recording of phenotypic data and the high computational demand of survival techniques under proportional hazard models. The identification of longevity-correlated traits that can be early registered in lifetime would therefore be very useful for beef cattle selection processes. The aim of this study was to estimate the genetic correlation of survival (SURV) with: growth - birth weight (BW), weight at 120 days (W120), weight at 210 days (W210); carcass - cold carcass weight (CCW), conformation (CON), fatness (FAT) and meat colour (COL); teat morphology - teat thickness (TT), teat length (TL) and udder depth (UD); leg morphology - forward (FL) and backward legs (BL); milk production (MILK) and docility (DOC). In the statistical analysis, SURV was measured in discrete-time intervals and modelled via a sequential threshold model. A series of independent bivariate Bayesian analyses between cow survival and each recorded trait were carried out. The posterior mean estimates (and posterior standard deviation) for the heritability of SURV was 0.05 (0.01); and for the relevant genetic correlations with SURV were 0.07 (0.04), 0.12 (0.05), 0.10 (0.05), 0.15 (0.05), -0.18 (0.06), 0.33 (0.06) and 0.27 (0.15) for BW, W120, W210, CCW, CON, FAT and COL, respectively.
A bench-top hyperspectral imaging system to classify beef from Nellore cattle based on tenderness
NASA Astrophysics Data System (ADS)
Nubiato, Keni Eduardo Zanoni; Mazon, Madeline Rezende; Antonelo, Daniel Silva; Calkins, Chris R.; Naganathan, Govindarajan Konda; Subbiah, Jeyamkondan; da Luz e Silva, Saulo
2018-03-01
The aim of this study was to evaluate the accuracy of classification of Nellore beef aged for 0, 7, 14, or 21 days and classification based on tenderness and aging period using a bench-top hyperspectral imaging system. A hyperspectral imaging system (λ = 928-2524 nm) was used to collect hyperspectral images of the Longissimus thoracis et lumborum (aging n = 376 and tenderness n = 345) of Nellore cattle. The image processing steps included selection of region of interest, extraction of spectra, and indentification and evalution of selected wavelengths for classification. Six linear discriminant models were developed to classify samples based on tenderness and aging period. The model using the first derivative of partial absorbance spectra (give wavelength range spectra) was able to classify steaks based on the tenderness with an overall accuracy of 89.8%. The model using the first derivative of full absorbance spectra was able to classify steaks based on aging period with an overall accuracy of 84.8%. The results demonstrate that the HIS may be a viable technology for classifying beef based on tenderness and aging period.
Su, H; Golden, B; Hyde, L; Sanders, S; Garrick, D
2017-11-01
Genetic parameters are required to evaluate carcass merit using correlated real-time ultrasound (RTU) measurements. Many registered bulls and heifers are measured using RTU before consideration for selection as parents, whereas few animals are recorded for carcass traits and those are often crossbred steers. The objective of this study was to estimate genetic parameters required for evaluating carcass merit in the American Hereford Association (AHA) and the American Simmental Association (ASA) using multivariate models and to assess accuracy of carcass trait estimated breeding values (EBV) for selection candidates. All available carcass data including carcass weight (CWT), fat thickness (FAT), longissimus muscle area (LMA), and marbling score (MRB) were provided by the AHA and the ASA along with RTU data including fat thickness (UFAT), longissimus muscle area (ULMA), and percentage of intramuscular fat (UIMF). Carcass data comprised 6,054 AHA and 9,056 ASA cattle, while RTU data in comparable numbers from close relatives comprised 6,074 AHA and 7,753 ASA cattle. Pedigrees included 33,226 AHA and 37,665 ASA animals. Fixed effects for carcass and RTU data included contemporary group, age at scan/slaughter, and major breed percentages. Restricted maximum likelihood procedures were applied to all the carcass and RTU measurements, along with birth weight to account for selection, fitting 8-trait multivariate models separately for each breed association. Heritability estimates for AHA and ASA carcass traits were 0.41 ± 0.04 and 0.25 ± 0.03 for FAT, 0.47 ± 0.04 and 0.32 ± 0.03 for LMA, 0.48 ± 0.04 and 0.43 ± 0.04 for MRB, 0.51 ± 0.04 and 0.34 ± 0.03 for CWT, and for RTU traits were 0.29 ± 0.04 and 0.37 ± 0.03 for UFAT, 0.31 ± 0.04 and 0.44 ± 0.03 for ULMA, and 0.45 ± 0.04 and 0.42 ± 0.03 for UIMF. Genetic correlations for AHA and ASA analyses between FAT and UFAT were 0.74 ± 0.08 and 0.28 ± 0.13, between LMA and ULMA were 0.81 ± 0.07 and 0.57 ± 0.10, and between MRB and UIMF were 0.54 ± 0.08 and 0.73 ± 0.07. Predictions of carcass merit using RTU measurements in Hereford cattle would be more reliable for FAT and LMA than MRB, but the reverse would be true for admixed Simmental cattle. Genetic correlations for MRB in AHA and for FAT and LMA in ASA are less than currently assumed in their national evaluations. Collection of greater numbers of carcass measurements would improve the accuracy of genetic evaluations for carcass traits in both breeds.
Marti, S; Jackson, J A; Slootmans, N; Lopez, E; Hodge, A; Pérez-Juan, M; Devant, M; Amatayakul-Chantler, S
2017-04-01
The objective of this study was to evaluate the effect of the GnRH vaccine on the performance and meat quality of Holstein bulls fed high concentrate diets. A total of 493 approximately 7month old bulls (initial BW 298±1.2kg) were allocated into 3 treatment groups, intact bulls (n=164), animals surgically castrated at 15 to 17d of the study (n=164), and animals vaccinated on 0 and 28d of the study with the GnRH vaccine (n=165). Animals were slaughtered between 131 and 133d and carcass quality was evaluated. Hot carcass weight, dressing percentage, fat classification and meat quality parameters did not differ significantly between surgically castrated and vaccinated animals but differed (P<0.05) from intact bulls. Carcass classification, pH at 26h, and fat color were not affected by treatment. Copyright © 2016 Elsevier Ltd. All rights reserved.
2013-01-01
Background Meat quality involves many traits, such as marbling, tenderness, juiciness, and backfat thickness, all of which require attention from livestock producers. Backfat thickness improvement by means of traditional selection techniques in Canchim beef cattle has been challenging due to its low heritability, and it is measured late in an animal’s life. Therefore, the implementation of new methodologies for identification of single nucleotide polymorphisms (SNPs) linked to backfat thickness are an important strategy for genetic improvement of carcass and meat quality. Results The set of SNPs identified by the random forest approach explained as much as 50% of the deregressed estimated breeding value (dEBV) variance associated with backfat thickness, and a small set of 5 SNPs were able to explain 34% of the dEBV for backfat thickness. Several quantitative trait loci (QTL) for fat-related traits were found in the surrounding areas of the SNPs, as well as many genes with roles in lipid metabolism. Conclusions These results provided a better understanding of the backfat deposition and regulation pathways, and can be considered a starting point for future implementation of a genomic selection program for backfat thickness in Canchim beef cattle. PMID:23738659
Kundu, Devapriya; Gill, Alexander; Lui, Chenyuan; Goswami, Namita; Holley, Richard
2014-01-01
This study determined the extent that irradiation of fresh beef surfaces with an absorbed dose of 1 kGy electron (e-) beam irradiation might reduce the viability of mixtures of O157 and non-O157 verotoxigenic Escherichia coli (VTEC) and Salmonella. These were grouped together based on similar resistances to irradiation and inoculated on beef surfaces (outside flat and inside round, top and bottom muscle cuts), and then e-beam irradiated. Salmonella serovars were most resistant to 1 kGy treatment, showing a reduction of ≤1.9 log CFU/g. This treatment reduced the viability of two groups of non-O157 E. coli mixtures by ≤4.5 and ≤3.9 log CFU/g. Log reductions of ≤4.0 log CFU/g were observed for E. coli O157:H7 cocktails. Since under normal processing conditions the levels of these pathogens on beef carcasses would be lower than the lethality caused by the treatment used, irradiation at 1 kGy would be expected to eliminate the hazard represented by VTEC E. coli. © 2013.
A STATISTICAL SURVEY OF DIOXIN-LIKE COMPOUNDS IN ...
The USEPA and the USDA completed the first statistically designed survey of the occurrence and concentration of dibenzo-p-dioxins (CDDs), dibenzofurans (CDFs), and coplanar polychlorinated biphenyls (PCBs) in the fat of beef animals raised for human consumption in the United States. Back fat was sampled from 63 carcasses at federally inspected slaughter establishments nationwide. The sample design called for sampling beef animal classes in proportion to national annual slaughter statistics. All samples were analyzed using a modification of EPA method 1613, using isotope dilution, High Resolution GC/MS to determine the rate of occurrence of 2,3,7,8-substituted CDDs/CDFs/PCBs. The method detection limits ranged from 0.05 ng/kg for TCDD to 3 ng/kg for OCDD. The results of this survey showed a mean concentration (reported as I-TEQ, lipid adjusted) in U.S. beef animals of 0.35 ng/kg and 0.89 ng/kg for CDD/CDF TEQs when either non-detects are treated as 0 value or assigned a value of 1/2 the detection limit, respectively, and 0.51 ng/kg for coplanar PCB TEQs at both non-detect equal 0 and 1/2 detection limit. journal article
Analysis of the factors creating consumer attributes of roasted beef steaks.
Guzek, Dominika; Głąbska, Dominika; Gutkowska, Krystyna; Wierzbicki, Jerzy; Woźniak, Alicja; Wierzbicka, Agnieszka
2015-03-01
The aim of the study was to analyze the factors creating consumer attributes of roasted beef steaks of various animals. Eight cuts from 30 carcasses (characterized by various types of animal, conformation and fat class, rib fat thickness, ossification score) were selected. Samples were prepared using the roasting method and consumers rated the tenderness, juiciness, flavor, overall acceptability (rated in a 100-point scale), and satisfaction (rated from 2 to 5) for analyzed samples. No influence of type of animal, fat class, conformation class or ossification score on the results of consumer analysis was observed. For all analyzed factors, the influence of cut on consumer analysis was observed (the highest values of all consumer attributes were observed for tenderloin - for juiciness significantly higher than for other cuts, for tenderness, flavor and MQ4 comparable only with rump (RMP231), while for overall acceptability and satisfaction - with both rump cuts). For rib fat thickness consumer attributes of roasted beef meat were not linear, but the influence was observed - the highest values of consumer attributes were observed for 13 mm rib fat thickness. © 2014 Japanese Society of Animal Science.
Biocontainment, biosecurity, and security practices in beef feedyards.
Brandt, Aric W; Sanderson, Michael W; DeGroot, Brad D; Thomson, Dan U; Hollis, Larry C
2008-01-15
To determine the biocontainment, biosecurity, and security practices at beef feedyards in the Central Plains of the United States. Survey. Managers of feedyards in Colorado, Kansas, Nebraska, Oklahoma, and Texas that feed beef cattle for finish before slaughter; feedyards had to have an active concentrated animal feeding operation permit with a 1-time capacity of >or= 1,000 cattle. A voluntary survey of feedyard personnel was conducted. Identified feedyard personnel were interviewed and responses regarding facility design, security, employees, disease preparedness, feedstuffs, hospital or treatment systems, sanitation, cattle sources, handling of sick cattle, and disposal of carcasses were collected in a database questionnaire. The survey was conducted for 106 feedyards with a 1-time capacity that ranged from 1,300 to 125,000 cattle. Feedyards in general did not have high implementation of biocontainment, biosecurity, or security practices. Smaller feedyards were, in general, less likely to use good practices than were larger feedyards. Results of the survey provided standard practices for biocontainment, biosecurity, and security in feedyards located in Central Plains states. Information gained from the survey results can be used by consulting veterinarians and feedyard managers as a basis for discussion and to target training efforts.
Daidzein enhances intramuscular fat deposition and improves meat quality in finishing steers
Zhao, Xiang-Hui; Yang, Zhu-Qing; Bao, Lin-Bin; Wang, Can-Yu; -Zhou, Shan; Gong, Jian-Ming; Fu, Chuan-Bian; Xu, Lan-Jiao; Liu, Chan-Juan
2015-01-01
An experiment was conducted to determine the effects of soy isoflavone daidzein on carcass characteristics, fat deposition, meat quality, and blood metabolites in finishing steers. Fourteen crossbred steers were used in a 120-d finishing study. These steers were stratified by weight into groups and randomly allotted by group to one of two dietary treatments: (1) control and (2) daidzein (500 mg/kg concentrate). The steers were fed a 90% concentrate diet. Supplemental daidzein did not affect slaughter weight, hot carcass weight, and dressing percentage, but tended to reduce fat proportion (not including intramuscular fat) in carcass and backfat thickness of steers. The carcass bone proportion was greater in steers fed daidzein diets than those fed control diets. Daidzein supplementation reduced pH at 24 h after slaughtered and moisture content and increased isocitrate dehydrogenase activity, fat content (16.28% and 7.94%), marbling score (5.29 and 3.36), redness (a*), and chroma (C*) values in longissimus muscle relative to control treatment. The concentrations of blood metabolites including glucose, blood urea nitrogen, triglyceride, total cholesterol, non-esterified fatty acid, high-density lipoprotein cholesterol (HDL-C), and low-density lipoprotein cholesterol (LDL-C) were all lower in steers fed daidzein diets than those fed control diets. Current results suggest that supplemental daidzein can affect lipid metabolism, increase intramuscular fat content and marbling score, and improve meat quality in finishing steers. Daidzein should be a promising feed additive for production of high-quality beef meat. PMID:25526906
Seasonal variation in carcass characteristics of korean cattle steers.
Piao, M Y; Baik, M
2015-03-01
Climate temperature affects animal production. This study was conducted to evaluate whether climatic conditions affect beef carcass characteristics of Korean cattle steers. The monthly carcass characteristics of Korean cattle steers (n = 2,182,415) for 8 yr (2006 through 2013) were collected from the Korean Institute for Animal Products Quality Evaluation. Daily climate temperature (CT) and relative humidity (RH) data were collected from the Korean Meteorological Administration. Weather conditions in South Korea during summer were hot and humid, with a maximum temperature of 28.4°C and a maximum RH of 91.4%. The temperature-humidity index (THI), calculated based on CT and RH, ranges from 73 to 80 during summer. Winter in South Korea was cold, with a minimum temperature of -4.0°C and a wind-chill temperature of -6.2°C. Both marbling score (MS) and quality grade (QG) of Korean cattle steer carcasses were generally best (p<0.05) in autumn and worst in spring. A correlation analysis showed that MS and QG frequencies were not associated (p>0.05) with CT. Yield grade (YG) of Korean cattle steer carcasses was lowest (p<0.05) in winter (November to January) and highest in spring and summer (May to September). A correlation analysis revealed that YG frequency was strongly correlated (r≥0.71; p<0.01) with CT and THI values. The rib eye area, a positive YG parameter, was not associated with CT. Backfat thickness (BT), a negative YG factor, was highest in winter (November and December). The BT was strongly negatively correlated (r≤-0.74; p<0.01) with CTs. Therefore, the poor YG during winter is likely due in part to the high BT. In conclusion, YG in Korean cattle steer carcasses was worst in winter. QGs were not associated with winter or summer climatic conditions.
Seasonal Variation in Carcass Characteristics of Korean Cattle Steers
Piao, M. Y.; Baik, M.
2015-01-01
Climate temperature affects animal production. This study was conducted to evaluate whether climatic conditions affect beef carcass characteristics of Korean cattle steers. The monthly carcass characteristics of Korean cattle steers (n = 2,182,415) for 8 yr (2006 through 2013) were collected from the Korean Institute for Animal Products Quality Evaluation. Daily climate temperature (CT) and relative humidity (RH) data were collected from the Korean Meteorological Administration. Weather conditions in South Korea during summer were hot and humid, with a maximum temperature of 28.4°C and a maximum RH of 91.4%. The temperature-humidity index (THI), calculated based on CT and RH, ranges from 73 to 80 during summer. Winter in South Korea was cold, with a minimum temperature of −4.0°C and a wind-chill temperature of −6.2°C. Both marbling score (MS) and quality grade (QG) of Korean cattle steer carcasses were generally best (p<0.05) in autumn and worst in spring. A correlation analysis showed that MS and QG frequencies were not associated (p>0.05) with CT. Yield grade (YG) of Korean cattle steer carcasses was lowest (p<0.05) in winter (November to January) and highest in spring and summer (May to September). A correlation analysis revealed that YG frequency was strongly correlated (r≥0.71; p<0.01) with CT and THI values. The rib eye area, a positive YG parameter, was not associated with CT. Backfat thickness (BT), a negative YG factor, was highest in winter (November and December). The BT was strongly negatively correlated (r≤−0.74; p<0.01) with CTs. Therefore, the poor YG during winter is likely due in part to the high BT. In conclusion, YG in Korean cattle steer carcasses was worst in winter. QGs were not associated with winter or summer climatic conditions. PMID:25656196
Water footprinting of pasture-based farms; beef and sheep.
Murphy, E; Curran, T P; Holden, N M; O'Brien, D; Upton, J
2018-05-01
In the context of water use for agricultural production, water footprints (WFs) have become an important sustainability indicator. To understand better the water demand for beef and sheep meat produced on pasture-based systems, a WF of individual farms is required. The main objective of this study was to determine the primary contributors to freshwater consumption up to the farm gate expressed as a volumetric WF and associated impacts for the production of 1 kg of beef and 1 kg of sheep meat from a selection of pasture-based farms for 2 consecutive years, 2014 and 2015. The WF included green water, from the consumption of soil moisture due to evapotranspiration, and blue water, from the consumption of ground and surface waters. The impact of freshwater consumption on global water stress from the production of beef and sheep meat in Ireland was also computed. The average WF of the beef farms was 8391 l/kg carcass weight (CW) of which 8222 l/kg CW was green water and 169 l/kg CW was blue water; water for the production of pasture (including silage and grass) contributed 88% to the WF, concentrate production - 10% and on-farm water use - 1%. The average stress-weighted WF of beef was 91 l H2O eq/kg CW, implying that each kg of beef produced in Ireland contributed to freshwater scarcity equivalent to the consumption of 91 l of freshwater by an average world citizen. The average WF of the sheep farms was 7672 l/kg CW of which 7635 l/kg CW was green water and 37 l/kg CW was blue water; water for the production of pasture contributed 87% to the WF, concentrate production - 12% and on-farm water use - 1%. The average stress-weighted WF was 2 l H2O eq/kg CW for sheep. This study also evaluated the sustainability of recent intensification initiatives in Ireland and found that increases in productivity were supported through an increase in green water use and higher grass yields per hectare on both beef and sheep farms.
Characterization of Radiation-Resistant Vegetative Bacteria in Beef1
Welch, Ardyce B.; Maxcy, R. B.
1975-01-01
Ground beef contains numerous microorganisms of various types. The commonly recognized bacteria are associated with current problems of spoilage. Irradiation, however, contributes a new factor through selective destruction of the microflora. The residual microorganisms surviving a nonsterilizing dose are predominantly gram-negative coccobacilli. Various classifications have been given, e.g., Moraxella, Acinetobacter, Achromobacter, etc. For a more detailed study of these radiation-resistant bacteria occurring in ground beef, an enrichment procedure was used for isolation. By means of morphological and biochemical tests, most of the isolates were found to be Moraxella, based on current classifications. The range of growth temperatures was from 2 to 50 C. These bacteria were relatively heat sensitive, e.g., D10 of 5.4 min at 70 C or less. The radiation resistance ranged from D10 values of 273 to 2,039 krad. Thus, some were more resistant than any presently recognized spores. A reference culture of Moraxella osloensis was irradiated under conditions comparable to the enrichment procedure used with the ground beef. The only apparent changes were in morphology and penicillin sensitivity. However, after a few subcultures these bacteria reverted to the characteristics of the parent strain. Thus, it is apparent that these isolates are a part of the normal flora of ground beef and not aberrant forms arising from the irradiation procedure. The significance, if any, of these bacteria is not presently recognized. Images PMID:1164011
Characterization of radiation-resistant vegetative bacteria in beef.
Welch, A B; Maxcy, R B
1975-08-01
Ground beef contains numerous microorganisms of various types. The commonly recognized bacteria are associated with current problems of spoilage. Irradiation, however, contributes a new factor through selective destruction of the microflora. The residual microorganisms surviving a nonsterilizing dose are predominantly gram-negative coccobacilli. Various classifications have been given, e.g., Moraxella, Acinetobacter, Achromobacter, etc. For a more detailed study of these radiation-resistant bacteria occurring in ground beef, an enrichment procedure was used for isolation. By means of morphological and biochemical tests, most of the isolates were found to be Moraxella, based on current classifications. The range of growth temperatures was from 2 to 50 C. These bacteria were relatively heat sensitive, e.g., D10 of 5.4 min at 70 C or less. The radiation resistance ranged from D10 values of 273 to 2,039 krad. Thus, some were more resistant than any presently recognized spores. A reference culture of Moraxella osloensis was irradiated under conditions comparable to the enrichment procedure used with the ground beef. The only apparent changes were in morphology and penicillin sensitivity. However, after a few subcultures these bacteria reverted to the characteristics of the parent strain. Thus, it is apparent that these isolates are a part of the normal flora of ground beef and not aberrant forms arising from the irradiation procedure. The significance, if any, of these bacteria is not presently recognized.
Papaleo Mazzucco, J; Goszczynski, D E; Ripoli, M V; Melucci, L M; Pardo, A M; Colatto, E; Rogberg-Muñoz, A; Mezzadra, C A; Depetris, G J; Giovambattista, G; Villarreal, E L
2016-04-01
Grazing steers from Angus and Hereford breeds, their cross-breeds and a three-way cross-breed (Limousin × Angus-Hereford) were measured for growth, carcass and meat quality traits. Breed effects were studied, and the association of SNPs with fat deposition and fatty acid (FA) composition (leptin, melanocortin-4 receptor, stearoyl-CoA desaturase, FA synthase and thyroglobulin) was tested. Limousin cross-breed showed the greatest final body weight, ultrasound rib eye area, dressing percentage, carcass and leg length, and the lowest backfat thickness and intramuscular fat content. Genetic groups had similar pH, shear force, cooking loss, L* and b* and n-6:n-3 ratio. Meat from 1/2-Angus presented greater a* than Limousin cross-breed. Whereas Angus had the highest total SFA content, Hereford had the lowest total SFA and the highest total MUFA. Limousin cross-breed had greater content of several individual PUFAs, total PUFA, n-6 and n-3 FA than Angus and 1/2-Angus. Leptin and FA synthase were associated with some FAs, supporting their influence over fat metabolism for grazing animals. Copyright © 2015 Elsevier Ltd. All rights reserved.
Kurtu, M Y
2004-01-01
A survey on camel meat productivity and consumption was conducted in Jijiga and Harar towns in 1999. Almost all the camels slaughtered were adults, predominantly males. Measurements of height, hump girth and thoracic girth were used to estimate the live weight. All the measurements were significantly greater in the male than in the female camels. Average live and carcass weights were 400 and 211 kg, respectively. Males were significantly heavier (p < 0.05) and had better dressing percentages than females. The carcasses contained averages of 76% meat, 12% fat and 20% bone for both males and females. The difference between the males and females was not significant for the ratio of meat and bones, except for fat, which was higher in the males. Camel meat is regarded as a high-quality food with medicinal value and as a least-cost source of meat. Camel meat is preferred to that of any other livestock by some people, particularly by the Somalis in Jijiga town. It is also more available, especially during the dry season when beef is in short supply. Hence, camel meat is a socially acceptable, economically viable and environmentally adaptable alternative source of meat, consumption of which should be encouraged.
NASA Technical Reports Server (NTRS)
1977-01-01
Space telemetry has been transferred to food processing in the Armour;Tenderorneter, an instrument that predicts the tenderness of meat. The space component of the instrument is a sensitive, highly reliable strain gage originally produced for NASA's Surveyor lunar lander and other space programs by BLH Electronics, Waltham, Mass. Several years ago Armour & Co. began to develop a method of testing a hanging carcass to predict how tender the meat would be after cooking; no such method then existed. After considerable experimentation, Armour came up with a manifold-mounted group of-needle-like probes, which when stuck into a carcass, could measure the degree to which the meat resisted penetration. This provided a basis for predicting tenderness, but the development required one more . step; a device that could translate meat resistance into an electrical readout. Armour found it in the BLH strain gage. The resulting Tenderometer, now a standard and important part of Armour's meat processing operation, includes a large, 10-pronged fork which is plunged into a carcass and a cable-connected, handheld electronic device that translates the sensings of the prongs into a tenderness reading on a dial. The instrument is used by Armour to select and guarantee a premium line of beef known as TesTender, whose annual sales run into tens of millions of pounds.
Effects of forage species or concentrate finishing on animal performance, carcass and meat quality.
Duckett, S K; Neel, J P S; Lewis, R M; Fontenot, J P; Clapham, W M
2013-03-01
Angus-cross steers (n = 128; initial BW = 270 ± 3.8 kg) were used in a 3-yr study to assess effects of forage species grazed before slaughter versus concentrate finishing on carcass and meat quality. At the completion of the stockering phase, steers were randomly allotted to mixed pasture (MP; n = 36/yr) or corn-silage concentrate (CON; n = 12/yr) finishing treatments. At 40 d before harvest, MP steers were randomly divided into 3 forage species treatments: alfalfa (AL), pearl millet (PM), or mixed pasture (MP). Average daily BW gain was greater (P = 0.001) for CON than for forage-finished (FOR) steers during the early and overall finishing phase. During the late finishing phase when FOR steers were grazing difference forage species, ADG was greater (P = 0.03) for PM than MP or AL. Harvest weight and HCW were greater (P < 0.001) for CON than FOR due to the differences in animal performance. Total fat percentage of the 9th to 11th rib section was 46% less(P = 0.028) for FOR than CON due to reductions (P < 0.001) in the percentage of subcutaneous fat. Warner-Bratzler shear force (WBS) values at 14 d and 28 d of aging did not differ (P > 0.78) between CON and FOR and were not altered (P > 0.40) by forage species. Trained sensory panel juiciness, initial tenderness, and overall tenderness scores did not differ (P > 0.17) by finishing treatment or forage species. Beef flavor intensity was greater (P < 0.001) for CON than FOR. Beef flavor intensity was greater (P < 0.02) for AL and PM than MP. Off-flavor intensity was greater (P < 0.001) for all forage-fed steaks, regardless of forage species, than CON. Finishing on forages reduced (P = 0.003) total lipid content by 61% for the LM compared with CON finished cattle. Forage species grazed before harvest did not alter (P > 0.05) total lipid content of the LM. Oleic acid concentration and total MUFA of the LM were 21% and 22% less (P = 0.001) for FOR than CON. Concentrations of all individual [linolenic acid, eicosapentaenoic (EPA), docosapentaenoic (DPA), and docosadexaenoic (DHA) acids] and total n-3 fatty acids were greater (P < 0.001) for FOR than CON. Finishing on AL increased (P = 0.017) the concentration of linolenic acid compared with MP or PM. The ratio of n-6 to n-3 fatty acids was greater (P = 0.001) for CON than FOR and did not differ (P = 0.88) by forage species. Concentrate finishing increases carcass weight with same time endpoints and accelerates deposition of MUFA in comparison with FOR, which reduces carcass weight and fat deposition but maintains high concentrations of n-3 and CLA fatty acids. Finishing system or forage species grazed 40 d before slaughter did not alter beef tenderness but FOR had greater off-flavors according to both trained and descriptive sensory panelists.
Greenhouse Gas Emissions of Beef Cattle Production in the Southern Great Plains
NASA Astrophysics Data System (ADS)
Kannan, N.; Niraula, R.; Saleh, A.; Osei, E.; Cole, A.; Todd, R.; Waldrip, H.; Aljoe, H.
2017-12-01
A five-year USDA-funded study titled "Resilience and vulnerability of beef cattle production in the Southern Great Plains under changing climate, land use, and markets" was initiated as a multi-institutional collaboration involving Texas Institute for Applied Environmental Research (TIAER)—Tarleton State University, United States Department of Agriculture (USDA)—Agricultural Research Service (ARS) in El Reno, Oklahoma, USDA—ARS in Bushland, Texas, Kansas State University, Oklahoma State University, University of Oklahoma, and the Noble Research Institute in Ardmore, Oklahoma. The project goal is to safeguard and promote regional beef production while mitigating its environmental footprint. Conducting a full Life Cycle Analysis (LCA) is one of the major objectives of the study, in addition to field experiments, extension, outreach, and education. Estimation of all the resource use and greenhouse gas emissions are parts of the LCA. A computer model titled Animal Production Life Cycle Analysis Tool (APLCAT) is developed and applied to conduct the LCA on beef cattle production in the study region. The model estimates water use, energy requirements, and emissions of enteric methane, manure methane, nitrous oxide, and carbon dioxide. Also included in the LCA analysis are land-atmospheric exchanges of methane, nitrous oxide, carbon dioxide and the global warming potential. Our study is focused on the cow-calf and stocker phases of beef cattle production. The animal production system in the study region is predominantly forage based with protein and energy supplements when needed. Spring calving typical to the study region. In the cow-calf phase animals typically graze native prairie although introduced pasture grazing is also prevalent. Stockers use winter pasture as the major feed. The results of greenhouse gas emissions summarized per kg of hot carcass weight or animal fed will be presented.
A comparison of two methods for surveying mortality of beached birds in British Columbia.
Stephen, C; Burger, A E
1994-01-01
Systematic surveys of beached birds are often limited in their ability to classify the causes of death of the carcasses recovered. Two methods of determining the cause of death of seabirds encountered during surveys of beaches of southwestern Vancouver Island, British Columbia, are compared. Birds were either subjected to external visual examinations by volunteer beach surveyors or submitted for gross postmortem examination by a veterinarian. The reliance on external examination of birds on beaches often prevented the accurate classification of the reproductive status and cause of death of the birds collected, but was valuable for describing the species, locations, and numbers of birds affected. The use of gross postmortem examinations of carcasses allowed for a more refined classification of the cause of death, as well as providing reliable descriptions of the bodily condition and sex of the birds examined. However, almost one half of the carcasses encountered were unsuitable for necropsy because of scavenging and decomposition. It is concluded that a combination of field and necropsy observations provides a useful method with which to monitor the pattern of mortality of beached seabirds. PMID:7994705
An Outcomes Model to Evaluate Risks and Benefits of Escherichia coli Vaccination in Beef Cattle
Malladi, Sasidhar
2012-01-01
Abstract We developed a stochastic simulation model to evaluate the impact of Escherichia coli O157:H7 (O157) vaccination on key epidemiological outcomes. The model evaluated a reduction in the O157 prevalence in feedlot cattle as well as concentration in cattle feces due to vaccination. The impact of this reduction on outcomes at slaughter/harvest and consumption was evaluated by simulating the relationships between the O157 prevalence and concentration at various points in the ground beef supply chain. The uncertainty and variability associated with the O157 contamination was explicitly modeled in production, slaughter, and consumption modules. Our results show that vaccination can have a significant benefit with respect to relevant outcomes such as (1) the number of human O157 illnesses due to the consumption of ground beef, (2) the number of production lots with high O157 contamination levels, (3) the likelihood of detection by U.S. Department of Agriculture Food Safety and Inspection Service testing, and (4) the probability of multiple illnesses due to ground beef servings from the same lot. These results show that these outcomes are strongly impacted by preharvest vaccination. For example, if the vaccine is used so as to reduce the prevalence of E. coli shedding cattle by 80% and if all U.S. steers and heifers were vaccinated, the expected number of human illnesses from ground beef-associated O157 would be reduced almost 60%. If the vaccine is 60% or 40% effective, the illness rate would be reduced approximately 45% or 40%, respectively. The number of production lots (10,000-lb lots) with high O157 contamination levels (>1000 servings) would be reduced by 96% if all steers and heifers received an 80% effective vaccine regimen. The analysis shows that resulting reduction in the number of shedding animals and the reduced concentration of E. coli on carcasses can combine to reduce human illnesses and cost to beef packers. PMID:22989170
An outcomes model to evaluate risks and benefits of Escherichia coli vaccination in beef cattle.
Hurd, H Scott; Malladi, Sasidhar
2012-10-01
We developed a stochastic simulation model to evaluate the impact of Escherichia coli O157:H7 (O157) vaccination on key epidemiological outcomes. The model evaluated a reduction in the O157 prevalence in feedlot cattle as well as concentration in cattle feces due to vaccination. The impact of this reduction on outcomes at slaughter/harvest and consumption was evaluated by simulating the relationships between the O157 prevalence and concentration at various points in the ground beef supply chain. The uncertainty and variability associated with the O157 contamination was explicitly modeled in production, slaughter, and consumption modules. Our results show that vaccination can have a significant benefit with respect to relevant outcomes such as (1) the number of human O157 illnesses due to the consumption of ground beef, (2) the number of production lots with high O157 contamination levels, (3) the likelihood of detection by U.S. Department of Agriculture Food Safety and Inspection Service testing, and (4) the probability of multiple illnesses due to ground beef servings from the same lot. These results show that these outcomes are strongly impacted by preharvest vaccination. For example, if the vaccine is used so as to reduce the prevalence of E. coli shedding cattle by 80% and if all U.S. steers and heifers were vaccinated, the expected number of human illnesses from ground beef-associated O157 would be reduced almost 60%. If the vaccine is 60% or 40% effective, the illness rate would be reduced approximately 45% or 40%, respectively. The number of production lots (10,000-lb lots) with high O157 contamination levels (> 1000 servings) would be reduced by 96% if all steers and heifers received an 80% effective vaccine regimen. The analysis shows that resulting reduction in the number of shedding animals and the reduced concentration of E. coli on carcasses can combine to reduce human illnesses and cost to beef packers.
Funston, R N; Summers, A F; Roberts, A J
2012-07-01
The beef cattle industry relies on the use of high-forage diets to develop replacement females, maintain the cow herd, and sustain stocker operations Forage quantity and quality fluctuate with season and environmental conditions Depending on class and physiological state of the animal, a forage diet may not always meet nutritional requirements, resulting in reduced ADG or BW loss if supplemental nutrients are not provided It is important to understand the consequences of such BW loss and the economics of providing supplementation to the beef production system Periods of limited or insufficient nutrient availability can be followed by periods of compensatory BW gain once dietary conditions improve This may have less impact on breeding animals, provided reproductive efficiency is not compromised, where actual BW is not as important as it is in animals destined for the feedlot A rapidly evolving body of literature is also demonstrating that nutritional status of cows during pregnancy can affect subsequent offspring development and production characteristics later in life The concept of fetal programming is that maternal stimuli during critical periods of fetal development have long-term implications for offspring Depending on timing, magnitude, and duration of nutrient limitation or supplementation, it is possible that early measures in life, such as calf birth BW, may be unaffected, whereas measures later in life, such as weaning BW, carcass characteristics, and reproductive traits, may be influenced This body of research provides compelling evidence of a fetal programming response to maternal nutrition in beef cattle Future competitiveness of the US beef industry will continue to be dependent on the use of high-forage diets to meet the majority of nutrient requirements Consequences of nutrient restriction or supplementation must be considered not only on individual animal performance but also the developing fetus and its subsequent performance throughout life.
2005-01-01
Abstract The purpose of the study, carried out in a beef processing plant, was to evaluate the effectiveness of a new prototype for steam pasteurization treatment in controlling microbiological hazards. Samples were taken by swabbing randomly selected sites before and after pasteurization and again after chilling to obtain total aerobic counts (TAC), total coliform counts (TCC), and generic Escherichia coli counts (ECC) on Petrifilm plates and to determine the prevalence of Salmonella spp., Listeria monocytogenes, and E. coli O157:H7 using standard enrichment techniques. Escherichia coli and L. monocytogenes strains were tested for various factors associated with their virulence by using colony hybridization and polymerase chain reaction (PCR), respectively. Antimicrobial susceptibility was determined for each isolate that was potentially pathogenic to humans by using the disk-diffusion method. Mean values for TAC, TCC, and ECC were 2.18, 0.16, and 0.06 log10 CFU/cm2, respectively, before pasteurization; 1.17, 0.03, and 0.01 log10 CFU/cm2 after pasteurization; and 0.89, 0.02, and 0.01 log10 CFU/cm2 after chilling. Prevalence of L. monocytogenes, Salmonella spp., and E. coli O157:H7 on carcasses was 0.8%, 0.0%, and 0.0%, respectively, before pasteurization; 2.6%, 0.0%, and 0.0% after pasteurization; and 3.1%, 0.1%, and 0.0% after chilling. The prevalence of E. coli containing ≥1 virulence gene was 14.7%. More specifically, 11.88% of the isolates obtained before pasteurization, 22.2% obtained after pasteurization, and 31.2% obtained after chilling had virulence genes. All L. monocytogenes isolates tested positive for the presence of 3 major virulence factors (hlyA, inlB, and plcB). Antibiograms showed that certain isolates were susceptible to all antibiotics, some showed an intermediate sensitivity, and others were multiresistant. Overall, these results suggest that steam pasteurization is an effective means of improving safety quality of beef carcasses. However, pasteurization may indirectly contribute to the growth of some pathogenic microorganisms, such as L. monocytogenes. PMID:16187550
Cooper, J D; Bird, S M
2002-01-01
The most likely human exposure to bovine spongiform encephalopathy (BSE) is dietary, through beef mechanically recovered meat (MRM) and head meat used in burgers, sausages and other meat products. The majority, reportedly 90% of beef MRM and 80% of head meat, was used in burgers. To enable quantification of UK dietary exposure to BSE, we quantified bovine carcass meat consumed as burgers, sausages and other meat products by birth cohort, gender and calendar period (1980-1989, 1990-1996). Synthesis of dietary data (cross-sectional National Dietary and Nutrition Surveys, and serial National Food Surveys and Realeat Surveys) to simulate weekly consumption by one-thousandth of the UK population in each year from 1980 to 1996. In 1980-1989, the highest number of consumers (per 7 days) of all three food groups was in the 1940-1969 birth cohort - averaging 3.7 million male consumers of burgers, 2.6 million of sausages and 8.5 million of other meat products. The post-1969 birth cohort had the next highest number of consumers of burgers (1.8 million males). In 1990-1996, consumer numbers declined for the two older cohorts, most strikingly for burgers (down to 2.5 million males in the 1940-1969 cohort). The 1940-1969 cohort retained the highest number of consumers of sausages and other meat products, and second place for burgers. Male consumption was higher, even in the pre-1940 birth cohort where, for demographic reasons, female consumers outnumbered males. In the post-1969 birth cohort, female consumption of bovine carcass meat weight as burgers increased from 68 tonnes in 1980-1989 to 81 tonnes in 1990-1996, and male consumption increased more markedly (by 41%) from 84 tonnes to 119 tonnes; and similarly for other meat products. Properly marshalled age-group and gender-specific consumption data contribute to a clearer understanding of the demography of those who were at risk of dietary exposure to BSE and of when their exposure intensity was greatest. Other countries may need to consider using dietary data to model their human BSE exposure from UK and other BSE-affected regions.
The contribution of efficient production of monozygotic twins to beef cattle breeding
HASHIYADA, Yutaka
2017-01-01
Production of sires with high breeding potential is indispensable for prompt and reliable breeding using their semen in the cattle industry. Currently, in Japan, we aim to further the production of Japanese black sires via a new breeding system that uses genetically homologous monozygotic twins so that better growth performance and carcass traits can be translated to the increased production of beef with higher economic value. Several studies have reported that monozygotic twins are produced by embryo bisection. On the other hand, with the evolution and stabilization of in vitro fertilization technology, it has become possible to produce multiple monozygotic twin calves from blastomeres separated from a cleavage-stage embryo. This review attempts to clarify breeding practices through revalidation of the factors that affect the production efficiency of monozygotic twin calves by embryo bisection. Furthermore, the establishment of a system for monozygotic twin embryo production via the simplified technique of blastomere separation is reviewed while showing data from our previously performed studies. PMID:29033399
Park, Sungkwon; Yan, Zhang; Choi, Changweon; Kim, Kyounghoon; Lee, Hyunjeong; Oh, Youngkyoon; Jeong, Jinyoung; Lee, Jonggil; Smith, Stephen B; Choi, Seongho
2017-01-01
We hypothesized that supplementing finishing diets with palm oil would promote adipogenic gene expression but depress stearoyl-CoA desaturase ( SCD ) gene expression in intramuscular (i.m.) adipose tissues of Hanwoo steers during fattening period (from 16 to 32 mon of age). Fourteen Hanwoo steers were allotted randomly to 2 groups of 7 steers based on initial BW and fed either a basal diet (control) or the basal diet supplemented with 5% palm oil (BDSP). At slaughter, i.m. adipose tissue was harvested for analysis of adipogenic gene expression and fatty acid composition. There were no differences in BW or average daily gain between treatment groups. Supplemental palm oil had no effect on carcass quality traits (carcass weight, backfat thickness, loin muscle area, or marbling scores) or meat color values. Palm oil increased ( p <0.05) expression of AMP-activated protein kinase-α and peroxisome proliferator-activated receptor-γ, but decreased ( p <0.05) CAAT/enhancer binding protein-β gene expression and tended to decrease stearoyl-CoA desaturase gene expression in i.m. adipose tissue. Palm oil increased total i.m. polyunsaturated fatty acids ( p <0.05) compared to the control i.m. adipose tissue, but had no effect on saturated or monounsaturated fatty acids. Although there were significant effects of supplemental palm oil on i.m. adipose tissue gene expression, the absence of negative effects on carcass and meat characteristics indicates that palm oil could be a suitable dietary supplement for the production of Hanwoo beef cattle.
Park, Sungkwon; Yan, Zhang; Choi, Changweon; Kim, Kyounghoon; Lee, Hyunjeong; Oh, Youngkyoon; Jeong, Jinyoung; Lee, Jonggil; Smith, Stephen B.; Choi, Seongho
2017-01-01
We hypothesized that supplementing finishing diets with palm oil would promote adipogenic gene expression but depress stearoyl-CoA desaturase (SCD) gene expression in intramuscular (i.m.) adipose tissues of Hanwoo steers during fattening period (from 16 to 32 mon of age). Fourteen Hanwoo steers were allotted randomly to 2 groups of 7 steers based on initial BW and fed either a basal diet (control) or the basal diet supplemented with 5% palm oil (BDSP). At slaughter, i.m. adipose tissue was harvested for analysis of adipogenic gene expression and fatty acid composition. There were no differences in BW or average daily gain between treatment groups. Supplemental palm oil had no effect on carcass quality traits (carcass weight, backfat thickness, loin muscle area, or marbling scores) or meat color values. Palm oil increased (p<0.05) expression of AMP-activated protein kinase-α and peroxisome proliferator-activated receptor-γ, but decreased (p<0.05) CAAT/enhancer binding protein-β gene expression and tended to decrease stearoyl-CoA desaturase gene expression in i.m. adipose tissue. Palm oil increased total i.m. polyunsaturated fatty acids (p<0.05) compared to the control i.m. adipose tissue, but had no effect on saturated or monounsaturated fatty acids. Although there were significant effects of supplemental palm oil on i.m. adipose tissue gene expression, the absence of negative effects on carcass and meat characteristics indicates that palm oil could be a suitable dietary supplement for the production of Hanwoo beef cattle. PMID:28515640
Shackelford, S D; Koohmaraie, M; Wheeler, T L; Cundiff, L V; Dikeman, M E
1994-02-01
The objectives of this experiment were to characterize longissimus muscle color, texture, and firmness for beef carcasses of diverse biological types and to determine the genetic parameters of lean color, texture, and firmness. The carcasses (n = 3,641) used in this experiment were from steers produced by mating Angus, Brahman, Braunvieh, Charolais, Chianina, Galloway, Gelbvieh, Hereford, Jersey, Limousin, Longhorn, Maine Anjou, Nellore, Piedmontese, Pinzgauer, Red Poll, Sahiwal, Salers, Shorthorn, Simmental, South Devon, and Tarentaise sires to Hereford and Angus dams. Steers were fed a corn-corn silage diet from weaning until slaughter at 356 to 575 d of age. Steers were slaughtered at commercial packing plants and longissimus muscle color, texture, and firmness were scored by trained carcass evaluators. Sire line least squares means for lean color, texture, and firmness ranged approximately one unit on a 7-point scale. Chianina crosses had darker-colored lean than all breed groups except Tarentaise and Simmental crosses (P < .05). Moreover, a higher percentage (P < .05) of Chianina crosses than of all other breed groups had unacceptably dark-colored ("dark red" or darker) lean. Bos indicus sire lines were not different from Bos taurus sire lines in frequency of carcasses with unacceptably dark-colored lean. However, Bos indicus crosses were more likely to be scored "very light cherry-red." Lean color and texture were lowly heritable, whereas lean firmness was moderately heritable. Thus, this experiment demonstrated that there is genetic variation in the incidence of the DFD condition; however, genetic variation was small relative to environmental variation.
The significance of clean and dirty animals for bacterial dynamics along the beef chain.
Hauge, Sigrun J; Nesbakken, Truls; Moen, Birgitte; Røtterud, Ole-Johan; Dommersnes, Sissel; Nesteng, Ole; Østensvik, Øyvin; Alvseike, Ole
2015-12-02
This study investigated the bacterial dynamics along the beef chain for clean and dirty cattle in the slaughter and processing lines, using classic quantitative methods and molecular analyses. In addition, the Norwegian national guidelines for Good Hygiene Practices in Norway were evaluated. In these guidelines, cattle presented for slaughter are categorised according to hide cleanliness, resulting in separate processing lines for meat from very dirty animals and reduced prices to farmers. The study was conducted in two commercial abattoirs in Norway. Two groups were compared; 40 visually clean cattle and 40 visually dirty cattle presented for slaughter, with 20 from each group at each abattoir. The same animals were sampled at five sampling sites: hides, carcass surfaces after dehiding, just before chilling, after chilling, and meat trimmings. Meat trimmings were sampled in only one abattoir. Three hundred and sixty samples were collected by swabbing 100 cm(2) of the brisket area at the first four sampling sites, and sampling 200 g of meat trimmings at the fifth site. The results showed that the hides of dirty cattle had more Enterobacteriaceae and higher Aerobic Plate Counts (APC) than visually clean cattle (P<0.05), however there was no significant difference for Escherichia coli. For the other sampling sites, there were no differences between the dirty and the clean group. An effect of chilling/drying of the carcass surfaces was demonstrated by the significant reduction in the number of carcasses on which E. coli and Enterobacteriaceae were detected; from 11% and 39% before chilling to 1% and 16% after chilling, respectively. Enterobacteriaceae and E. coli were detected in only three and one of the meat trimming samples, respectively. Amplification and sequencing of the 16S rRNA gene from 643 Enterobacteriaceae colonies derived from 107 samples demonstrated that Escherichia/Shigella were dominant within this family on the hides. However, after dehiding, after grading, and after chilling, the genera Citrobacter and Enterobacter dominated. The meat trimmings were dominated by the genera Kluyvera, Hafnia, and unclassified Enterobacteriaceae. The relative proportions of Escherichia/Shigella were higher for dirty animals than for clean animals, and were higher on hides than from sampling sites further down the chain (P<0.05). The minor differences in contamination on carcass surfaces and meat trimmings between clean and dirty cattle indicate that separate processing lines in Norwegian abattoirs seem to be unnecessary. Copyright © 2015 Elsevier B.V. All rights reserved.
Drennan, M J; McGee, M; Keane, M G
2008-05-01
The objective was to determine the relationship of muscular and skeletal scores taken on the live animal and carcass conformation and fat scores with carcass composition and value. Bulls (n = 48) and heifers (n = 37) of 0.75 to 1.0 late-maturing breed genotypes slaughtered at 16 and 20 months of age, respectively, were used. At 8 months of age (weaning) and immediately pre-slaughter, visual muscular scores were recorded for each animal and additionally skeletal scores were recorded pre-slaughter. Carcass weight, kidney and channel fat weight, carcass conformation and fat scores, fat depth over the longissimus dorsi muscle at the 12th (bulls) or 10th (heifers) rib and carcass length were recorded post-slaughter. Each carcass was subsequently dissected into meat, fat and bone using a commercial dissection procedure. Muscular scores taken pre-slaughter showed positive correlations with killing-out rate (r ≈ 0.65), carcass meat proportion (r ≈ 0.60), value (r ≈ 0.55) and conformation score (r ≈ 0.70), and negative correlations with carcass bone (r ≈ -0.60) and fat (r ≈ -0.4) proportions. Corresponding correlations with muscular scores at weaning were lower. Correlations of skeletal scores taken pre-slaughter, carcass length and carcass weight with killing-out rate and the various carcass traits were mainly not significant. Carcass fat depth and kidney and channel fat weight were negatively correlated with carcass meat proportion and value, and positively correlated with fat proportion. Correlations of carcass conformation score were positive (r = 0.50 to 0.68) with killing-out rate, carcass meat proportion and carcass value and negative with bone (r ≈ -0.56) and fat (r ≈ -0.40) proportions. Corresponding correlations with carcass fat score were mainly negative except for carcass fat proportion (r ≈ 0.79). A one-unit (scale 1 to 15) increase in carcass conformation score increased carcass meat proportion by 8.9 and 8.1 g/kg, decreased fat proportion by 4.0 and 2.9 g/kg and decreased bone proportion by 4.9 and 5.2 g/kg in bulls and heifers, respectively. Corresponding values per unit increase in carcass fat score were -11.9 and -9.7 g/kg, 12.4 and 9.9 g/kg, and -0.5 and -0.2 g/kg. Carcass conformation and fat scores explained 0.70 and 0.55 of the total variation in meat yield for bulls and heifers, respectively. It is concluded that live animal muscular scores, and carcass conformation and fat scores, are useful indicators of carcass meat proportion and value.
Non-additive genetic variation in growth, carcass and fertility traits of beef cattle.
Bolormaa, Sunduimijid; Pryce, Jennie E; Zhang, Yuandan; Reverter, Antonio; Barendse, William; Hayes, Ben J; Goddard, Michael E
2015-04-02
A better understanding of non-additive variance could lead to increased knowledge on the genetic control and physiology of quantitative traits, and to improved prediction of the genetic value and phenotype of individuals. Genome-wide panels of single nucleotide polymorphisms (SNPs) have been mainly used to map additive effects for quantitative traits, but they can also be used to investigate non-additive effects. We estimated dominance and epistatic effects of SNPs on various traits in beef cattle and the variance explained by dominance, and quantified the increase in accuracy of phenotype prediction by including dominance deviations in its estimation. Genotype data (729 068 real or imputed SNPs) and phenotypes on up to 16 traits of 10 191 individuals from Bos taurus, Bos indicus and composite breeds were used. A genome-wide association study was performed by fitting the additive and dominance effects of single SNPs. The dominance variance was estimated by fitting a dominance relationship matrix constructed from the 729 068 SNPs. The accuracy of predicted phenotypic values was evaluated by best linear unbiased prediction using the additive and dominance relationship matrices. Epistatic interactions (additive × additive) were tested between each of the 28 SNPs that are known to have additive effects on multiple traits, and each of the other remaining 729 067 SNPs. The number of significant dominance effects was greater than expected by chance and most of them were in the direction that is presumed to increase fitness and in the opposite direction to inbreeding depression. Estimates of dominance variance explained by SNPs varied widely between traits, but had large standard errors. The median dominance variance across the 16 traits was equal to 5% of the phenotypic variance. Including a dominance deviation in the prediction did not significantly increase its accuracy for any of the phenotypes. The number of additive × additive epistatic effects that were statistically significant was greater than expected by chance. Significant dominance and epistatic effects occur for growth, carcass and fertility traits in beef cattle but they are difficult to estimate precisely and including them in phenotype prediction does not increase its accuracy.
Beef longissimus slice shear force measurement among steak locations and institutions.
Wheeler, T L; Shackelford, S D; Koohmaraie, M
2007-09-01
The objectives of this study were 1) to determine which longissimus thoracis et lumborum steaks were appropriate for slice shear force measurement and 2) to determine the among and within institution variation in LM slice shear force values of 6 institutions after they received expert training on the procedure and a standard kit of equipment. In experiment 1, longissimus thoracis et lumborum muscles were obtained from the left sides of 50 US Select carcasses. Thirteen longissimus thoracis and 12 longissimus lumborum steaks were cut 2.54 cm thick from each muscle. Slice shear force was measured on each steak. Mean slice shear force among steak locations (1 to 25) ranged from 19.7 to 27.3 kg. Repeatability of slice shear force (based on variance) among steak locations ranged from 0.71 to 0.96. In experiment 2, the longissimus thoracis et lumborum were obtained from the left sides of 154 US Select beef carcasses. Eight 2.54-cm-thick steaks were obtained from the caudal end of each frozen longissimus thoracis, and six 2.54-cm-thick steaks were obtained from the cranial end of each frozen longissimus lumborum. Seven pairs of consecutive steaks were assigned for measurement of slice shear force. Seven institutions were assigned to steak pairs within each carcass using a randomized complete block design, such that each institution was assigned to each steak pair 22 times. Repeatability estimates for slice shear force for the 7 institutions were 0.89, 0.83, 0.91, 0.90, 0.89, 0.76, and 0.89, respectively, for institutions 1 to 7. Mean slice shear force values were least (P <0.05) for institutions 3 (22.7 kg) and 7 (22.3 kg) and were greatest (P <0.05) for institutions 5 (27.3 kg) and 6 (27.6 kg). Institutions with greater mean slice shear force (institutions 5 and 6) used cooking methods that required more (P <0.05) time (32.0 and 36.9 min vs. 5.5 to 11.8 min) to reach the end point temperature (71 degrees C) and resulted in greater (P <0.05) cooking loss (both 26.6% vs. 14.4 to 24.1%). Differences among institutions in the repeatability of slice shear force were partially attributable to differences among institutions in the consistency of steak thawing and cooking procedures. These results emphasize the importance of sample location within the muscle and cooking method in the measurement of tenderness and indicate that with proper training and application of the protocol, slice shear force is a highly repeatable (R approximately 0.90) measure of beef LM tenderness.
Igo, J L; Brooks, J C; Johnson, B J; Starkey, J; Rathmann, R J; Garmyn, A J; Nichols, W T; Hutcheson, J P; Miller, M F
2011-03-01
Anabolic steroid implants are commonly used to increase growth performance and carcass leanness. The objective of this study was to determine the effects of various trenbolone acetate implants on Warner-Bratzler shear force (WBSF), slice shear force, and consumer palatability ratings for USDA Choice and Select beef strip steaks aged for 14 and 21 d from cattle implanted before slaughter. Beef steers (n = 1,740) were subjected to the following treatments: 1) nonimplanted control (CON); 2) Revalor-IS on d 0 and Revalor-S on d 70 (IS/S); or 3) Revalor-XS (RXS) on d 0, and were randomly assigned to pens within blocks. A subsample of USDA Choice (n = 82) and USDA Select (n = 81) carcasses was selected. Strip loins from these carcasses were collected, and steaks measuring 2.54 cm were fabricated and aged for 14 or 21 d postmortem. Select steaks aged 14 d from RXS cattle had decreased (P < 0.05) WBSF values compared with IS/S steaks, but CON steaks did not differ from either implant treatment. Warner-Bratzler shear force did not differ among treatments (P > 0.05) from USDA Choice steaks aged 14 and 21 d or from Select steaks aged 21 d. Consumer scores for flavor and overall liking for USDA Choice 14-d aged RXS steaks were less (P < 0.05) than CON steaks; however, there were no differences between RXS, IS/S, and CON for tenderness or juiciness, or for tenderness and overall acceptability. Select steaks aged 14 d from IS/S cattle had less (P < 0.05) tenderness, tenderness acceptability, overall acceptability, overall liking, juiciness, and flavor scores than RXS and CON steaks; however, consumers also rated RXS steaks less for tenderness, juiciness, and tenderness acceptability when compared with CON steaks. Consumer scores for overall liking, flavor, and tenderness for USDA Choice steaks aged 21 d from RXS, IS/S, and CON did not differ. However, implant affected (P < 0.05) overall liking, flavor, juiciness, and tenderness for USDA Select steaks aged 21 d. Even so, there were no differences between RXS, IS/S, and CON steaks for tenderness or overall acceptability for steaks aged 21 d, regardless of quality grade. Results indicated that tenderness differences exist among implant strategies when strip steaks were aged 14 d; however, tenderness and overall consumer acceptability were only influenced by implant in Select steaks aged 14 d. Furthermore, aging for 21 d can minimize and even eliminate implant differences in WBSF and slice shear force, as well as tenderness and overall consumer acceptability.
Characterization of radiation-resistant vegetative bacteria in beef
DOE Office of Scientific and Technical Information (OSTI.GOV)
Welch, A.B.; Maxcy, R.B.
1975-08-01
Ground beef contains numerous microorganisms of various types. The commonly recognized bacteria are associated with current problems of spoilage. Irradiation, however, contributes a new factor through selective destruction of the microflora. The residual microorganisms surviving a nonsterilizing dose are predominantly gram-negative coccobacilli. Various classifications have been given, e.g., Moraxella, Acinetobacter, Achromobacter, etc. For a more detailed study of these radiation-resistant bacteria occurring in ground beef, an enrichment procedure was used for isolation. By means of morphological and biochemical tests, most of the isolates were found to be Moraxella, based on current classifications. The range of growth temperatures was from 2more » to 50 C. These bacteria were relatively heat sensitive, e.g., D$sub 10$ of 5.4 min at 70$sup 0$C or less. The radiation resistance ranged from D$sub 10$ values of 273 to 2,039 krad. Thus, some were more resistant than any presently recognized spores. A reference culture of Moraxella osloensis was irradiated under conditions comparable to the enrichment procedure used with the ground beef. The only apparent changes were in morphology and penicillin sensitivity. However, after a few subcultures these bacteria reverted to the characteristics of the parent strain. Thus, it is apparent that these isolates are a part of the normal flora of ground beef and not aberrant forms arising from the irradiation procedure. The significance, if any, of these bacteria is not presently recognized. (auth)« less
Barth, Albert D; Waldner, Cheryl L
2002-04-01
Breeding soundness evaluation records from 2110 beef bulls, for the period of 1986 to 1999, were analyzed to determine the prevalence and importance of factors affecting breeding soundness classification. The percentage of all bulls classified as satisfactory ranged from 49.0% in January to 73.3% in May. The percentage of physically normal bulls with satisfactory semen quality ranged from 65.7% in January to 87.5% in June. Poor body condition or excessive body condition, below average or below the recommended minimum scrotal circumference, lameness, and severe scrotal frostbite significantly reduced the probability of a satisfactory breeding soundness classification. The percentage of sperm with midpiece defects declined significantly and the percentage of sperm with head defects increased significantly with the approach of summer. Photoperiod, cold stress, poor or excessive body condition, and reduced feed quality may interact to reduce semen quality in the winter months.
NASA Astrophysics Data System (ADS)
Seo, Young Wook; Yoon, Seung Chul; Park, Bosoon; Hinton, Arthur; Windham, William R.; Lawrence, Kurt C.
2013-05-01
Salmonella is a major cause of foodborne disease outbreaks resulting from the consumption of contaminated food products in the United States. This paper reports the development of a hyperspectral imaging technique for detecting and differentiating two of the most common Salmonella serotypes, Salmonella Enteritidis (SE) and Salmonella Typhimurium (ST), from background microflora that are often found in poultry carcass rinse. Presumptive positive screening of colonies with a traditional direct plating method is a labor intensive and time consuming task. Thus, this paper is concerned with the detection of differences in spectral characteristics among the pure SE, ST, and background microflora grown on brilliant green sulfa (BGS) and xylose lysine tergitol 4 (XLT4) agar media with a spread plating technique. Visible near-infrared hyperspectral imaging, providing the spectral and spatial information unique to each microorganism, was utilized to differentiate SE and ST from the background microflora. A total of 10 classification models, including five machine learning algorithms, each without and with principal component analysis (PCA), were validated and compared to find the best model in classification accuracy. The five machine learning (classification) algorithms used in this study were Mahalanobis distance (MD), k-nearest neighbor (kNN), linear discriminant analysis (LDA), quadratic discriminant analysis (QDA), and support vector machine (SVM). The average classification accuracy of all 10 models on a calibration (or training) set of the pure cultures on BGS agar plates was 98% (Kappa coefficient = 0.95) in determining the presence of SE and/or ST although it was difficult to differentiate between SE and ST. The average classification accuracy of all 10 models on a training set for ST detection on XLT4 agar was over 99% (Kappa coefficient = 0.99) although SE colonies on XLT4 agar were difficult to differentiate from background microflora. The average classification accuracy of all 10 models on a validation set of chicken carcass rinses spiked with SE or ST and incubated on BGS agar plates was 94.45% and 83.73%, without and with PCA for classification, respectively. The best performing classification model on the validation set was QDA without PCA by achieving the classification accuracy of 98.65% (Kappa coefficient=0.98). The overall best performing classification model regardless of using PCA was MD with the classification accuracy of 94.84% (Kappa coefficient=0.88) on the validation set.
Industry benefits from recent genetic progress in sheep and beef populations.
Amer, P R; Nieuwhof, G J; Pollott, G E; Roughsedge, T; Conington, J; Simm, G
2007-11-01
An analytical model that evaluates the benefits from 10 years of genetic improvement over a 20-year time frame was specified. Estimates of recent genetic trends in recorded traits, industry statistics and published estimates of the economic values of trait changes were used to parameterise the model for the UK sheep and beef industries. Despite rates of genetic change in the relevant performance-recorded breeding populations being substantially less than theoretical predictions, the financial benefits of genetic change were substantial. Over 20 years, the benefits from 10 years of genetic progress at recently achieved rates in recorded hill sheep, sheep crossing sire and sheep terminal sire breeding programmes was estimated to be £5.3, £1.0 and £11.5 million, respectively. If dissemination of genetic material is such that these rates of change are also realised across the entire ram breeding industry, the combined benefits would be £110.8 million. For beef cattle, genetic evaluation systems have been operating within all the major breeds for some years with quite widespread use of performance recording, and so genetic trends within the beef breeds were used as predictors of industry genetic change. Benefits from 10 years of genetic progress at recent rates of change, considering a 20-year time frame, in terminal sire beef breeds are expected to be £4.9 million. Benefits from genetic progress for growth and carcass characters in dual-purpose beef breeds were £18.2 million after subtraction of costs associated with a deterioration in calving traits. These benefits may be further offset by unfavourable associated changes in maternal traits. Additional benefits from identification and use of the best animals available from the breeding sector for commercial matings through performance recording and genetic evaluation could not be quantified. When benefits of genetic improvement were expressed on an annual present value basis and compared with lagged annual investment costs to achieve it, the internal rate of return (IRR) on the combined investment in sheep and beef cattle was 32%. Despite a much higher rate of participation in performance recording, the present value of benefits and the IRR were lower for beef cattle than for sheep. The implications of these results for future national and industry investment in genetic improvement infrastructure were discussed.
Osawa, T; Kuchida, K; Hidaka, S; Kato, T
2008-01-01
In Japan, the degree of marbling in ribeye (M. longissimus thoracis) is evaluated in the beef meat grading process. However, other muscles (e.g., M. trapezius) are also important in determining the meat quality and carcass market prices. The purpose of this study was to estimate genetic parameters for M. longissimus thoracis (M-LONG) and M. trapezius (M-TRAP) of carcass cross section of Japanese Black steers by computer image analysis. The number of records of Japanese Black steers and the number of pedigree records were 2,925 and 10,889, respectively. Digital images of the carcass cross section were taken between the sixth and seventh ribs by photographing equipment. Muscle area (MA), fat area ratio (FAR), overall coarseness of marbling particles (OCM), and coarseness of maximum marbling particle (MMC) in M-LONG and M-TRAP were calculated by image analysis. Genetic parameters for these traits were estimated using the AIREMLF90 program with an animal model. Fixed effects that were included in the model were dates of arrival at the carcass market and slaughter age (mo), and random effects of fattening farms, additive genetic effects and residuals were included in the model. For M-LONG, heritability estimates (+/-SE) were 0.46 +/- 0.06, 0.59 +/- 0.06, 0.47 +/- 0.06, and 0.20 +/- 0.05 for MA, FAR, OCM, and MMC, respectively. Heritability estimates (+/-SE) in M-TRAP were 0.47 +/- 0.06, 0.57 +/- 0.07, 0.49 +/- 0.07, and 0.13 +/- 0.04 for the same traits. Genetic correlations between subcutaneous fat thickness and FAR for M-LONG and M-TRAP were negative (-0.21 and -0.19, respectively). Those correlations between M-LONG and M-TRAP were moderate to high for MA, FAR, OCM, and MMC (0.38, 0.52, 0.39, and 0.60, respectively). These results indicate that other muscles including M-LONG should be evaluated for more efficient genetic improvement.
Lee, Seung Hwan; van der Werf, J H J; Kim, Nam Kuk; Lee, Sang Hong; Gondro, C; Park, Eung Woo; Oh, Sung Jong; Gibson, J P; Thompson, J M
2011-10-01
Causal mutations affecting quantitative trait variation can be good targets for marker-assisted selection for carcass traits in beef cattle. In this study, linkage and linkage disequilibrium analysis (LDLA) for four carcass traits was undertaken using 19 markers on bovine chromosome 14. The LDLA analysis detected quantitative trait loci (QTL) for carcass weight (CWT) and eye muscle area (EMA) at the same position at around 50 cM and surrounded by the markers FABP4SNP2774C>G and FABP4_μsat3237. The QTL for marbling (MAR) was identified at the midpoint of markers BMS4513 and RM137 in a 3.5-cM marker interval. The most likely position for a second QTL for CWT was found at the midpoint of tenth marker bracket (FABP4SNP2774C>G and FABP4_μsat3237). For this marker bracket, the total number of haplotypes was 34 with a most common frequency of 0.118. Effects of haplotypes on CWT varied from a -5-kg deviation for haplotype 6 to +8 kg for haplotype 23. To determine which genes contribute to the QTL effect, gene expression analysis was performed in muscle for a wide range of phenotypes. The results demonstrate that two genes, LOC781182 (p = 0.002) and TRPS1 (p = 0.006) were upregulated with increasing CWT and EMA, whereas only LOC614744 (p = 0.04) has a significant effect on intramuscular fat (IMF) content. Two genetic markers detected in FABP4 were the most likely QTL position in this QTL study, but FABP4 did not show a significant effect on both traits (CWT and EMA) in gene expression analysis. We conclude that three genes could be potential causal genes affecting carcass traits CWT, EMA, and IMF in Hanwoo.
Luedtke, Brandon E; Bosilevac, Joseph M
2015-01-01
The increased association of enterohemorrhagic Escherichia coli (EHEC) with veal calves has led the United States Department of Agriculture Food Safety and Inspection Service to report results of veal meat contaminated with the Top 7 serogroups separately from beef cattle. However, detection methods that can also provide concentration for determining the prevalence and abundance of EHEC associated with veal are lacking. Here we compared the ability of qPCR and a molecular based most probable number assay (MPN) to detect and enumerate EHEC from veal hides at the abattoir and the resulting pre-intervention carcasses. In addition, digital PCR (dPCR) was used to analyze select samples. The qPCR assay was able to enumerate total EHEC in 32% of the hide samples with a range of approximately 34 to 91,412 CFUs/100 cm(2) (95% CI 4-113,460 CFUs/100 cm(2)). Using the MPN assay, total EHEC was enumerable in 48% of the hide samples and ranged from approximately 1 to greater than 17,022 CFUs/100 cm(2) (95% CI 0.4-72,000 CFUs/100 cm(2)). The carcass samples had lower amounts of EHEC with a range of approximately 4-275 CFUs/100 cm(2) (95% CI 3-953 CFUs/100 cm(2)) from 17% of samples with an enumerable amount of EHEC by qPCR. For the MPN assay, the carcass samples ranged from 0.1 to 1 CFUs/100 cm(2) (95% CI 0.02-4 CFUs/100 cm(2)) from 29% of the samples. The correlation coefficient between the qPCR and MPN enumeration methods indicated a moderate relation (R (2) = 0.39) for the hide samples while the carcass samples had no relation (R (2) = 0.002), which was likely due to most samples having an amount of total EHEC below the reliable limit of quantification for qPCR. Interestingly, after enrichment, 81% of the hide samples and 94% of the carcass samples had a detectable amount of total EHEC by qPCR. From our analysis, the MPN assay provided a higher percentage of enumerable hide and carcass samples, however determining an appropriate dilution range and the limited throughput offer additional challenges.
Estimates of genetic parameters for chemical traits of meat quality in Japanese black cattle
Sakuma, Hironori; Saito, Kaoru; Kohira, Kimiko; Ohhashi, Fumie; Shoji, Noriaki
2016-01-01
Abstract Genetic parameters for 54 carcass and chemical traits, such as general composition (moisture, crude fat and crude protein), fatty acid composition and water‐soluble compounds (free amino acids, peptides, nucleotides and sugars) of 587 commercial Japanese Black cattle were assessed. Heritability estimates for carcass traits and general composition ranged between 0.19–0.28, whereas those for fatty acid composition ranged between 0.11–0.85. Most heritability estimates for water‐soluble compounds were lower than 0.30; these traits were affected by aging period. Moderate heritability was observed for glutamine, alanine, taurine, anserine, inosine 5′‐monophosphate (IMP), inosine and myo‐inositol. In particular, heritability estimates were the highest (0.66) for taurine. Traits with moderate heritability were unaffected by aging period, with the exception of IMP, which was affected by aging period but exhibited moderate heritability (0.47). Although phenotypic correlations of water‐soluble compounds with carcass weight (CW), beef marbling standard (BMS) and monounsaturated fatty acid were generally low, genetic correlations between these traits were low to high. At the genetic level, most of the water‐soluble compounds were positively correlated with monounsaturated fatty acid but negatively correlated with CW and BMS. Thus, our results indicate that genetic variance and correlations could exist and be captured for some of the water‐soluble compounds. PMID:27146072
2016-01-01
Interaction between carcass quality grade and end-point cooking temperature on eating quality of Hanwoo m. longissimus was investigated. Ten (10) of steers were sampled from a commercial population; carcasses with QG 1++ (n=5) and QG 1 (n=5) were chosen. Samples were cooked by electric oven at 60 or 82℃ and compared with uncooked control samples. The pH was not affected by cooking temperature but decreased the redness after cooking and steaks cooked at 60℃ were more reddish than steaks cooked at 82℃ in both QG groups. Higher cooking temperature greatly (p<0.05) increased the cooking loss, but there was no significant interaction between cooking temperature and QG on the cooking loss. Moisture is negatively correlated with temperature in both QG while the proportionate relationship between crude fat and end-point temperature found in QG 1++. WBSF values were significantly (p<0.05) high for QG 1, while that was significantly (p<0.05) increased when the temperature continues to increase. The increasing quality grade of beef resulted in significant higher (p<0.01) level of TBARS and cooking temperature increased TBARS content. Fatty acid composition was not altered by cooking at both temperatures and also the amount of fat intake was not changed. The current study indicates that eating quality of beef m. longissimus was greatly influenced by end-point temperature being interacted with QG. However, the amount and composition of fat were stable regardless of end-point temperatures. These results will provide a consumer reference to determine cooking conditions and intramuscular fat content. PMID:27433099
Puri, Amrita; Joelsson, Adam C; Terkhorn, Shawn P; Brown, Ashley S; Gaudioso, Zara E; Siciliano, Nicholas A
2017-09-01
Veriflow® Salmonella species (Veriflow SS) is a molecular-based assay for the presumptive detection of Salmonella spp. from environmental surfaces (stainless steel, sealed concrete, plastic, and ceramic tile), dairy (2% milk), raw meat (20% fat ground beef), chicken carcasses, and ready-to-eat (RTE) food (hot dogs). The assay utilizes a PCR detection method coupled with a rapid, visual, flow-based assay that develops in 3 min post-PCR amplification and requires only an 18 h enrichment for maximum sensitivity. The Veriflow SS system eliminates the need for sample purification, gel electrophoresis, or fluorophore-based detection of target amplification and does not require complex data analysis. This Performance Tested MethodSM validation study demonstrated the ability of the Veriflow SS method to detect low levels of artificially inoculated or naturally occurring Salmonella spp. in eight distinct environmental and food matrixes. In each reference comparison study, probability of detection analysis indicated that there was no significant difference between the Veriflow SS method and the U.S. Department of Agriculture Food Safety and Inspection Service Microbiology Laboratory Guidebook Chapter 4.06 and the U.S. Food and Drug Administration Bacteriological Analytical Manual Chapter 5 reference methods. A total of 104 Salmonella strains were detected in the inclusivity study, and 35 nonspecific organisms went undetected in the exclusivity study. The study results show that the Veriflow SS method is a sensitive, selective, and robust assay for the presumptive detection of Salmonella spp. sampled from environmental surfaces (stainless steel, sealed concrete, plastic, and ceramic tile), dairy (2% milk), raw meat (20% fat ground beef), chicken carcasses, and RTE food (hot dogs).
Ruiz, M; Sarriés, M V; Beriain, M J; Crecente, S; Domínguez, R; Lorenzo, J M
2018-05-01
In order to improve foal carcass quality, it is necessary in particular to improve the carcass dressing percentage and tissue composition. Thus, it is important to establish relationships between grading systems and these parameters. This research was conducted to study the effect of slaughter age (13 v. 26 months) and finishing feed (standard v. linseed feed) on carcass characteristics such as subcutaneous fat colour plus classification of foals for the degree of fatness and conformation. For this study, 46 foals of crossbred genotype (Galician Mountain×Burguete) were used. Finishing feed did not affect any parameter, whereas slaughter age influenced all parameters (P<0.05). The oldest foals had higher carcass measurements, 13% more of meat, 4% more of bone, 12% more of fat, and 4% and 9% bigger fore- and hindquarter, respectively. Consequently, bigger valuable prime cuts were obtained. Nevertheless, the meat : bone ratio was very similar for both 13- and 26-month-old foals (2.88). Most of 26-month-old foals were classified in 'E' (Extra) and '5' (Complete fat cover) categories of conformation and degree of fatness. Most of the carcasses showed subcutaneous fat described as yellowish-white irrespective of age or diet. A regression model found that conformation (36%) and degree of fatness (33%) in live animals was positively linked with carcass tissue composition. It is therefore suggested that producers aim for older slaughter ages than 13 months and that the foal meat industry establishes grading systems to predict carcass quality. Further studies should be necessary to find the optimal slaughter age to obtain carcasses in the best categories of degree of fatness and conformation. New studies should be recommended to improve the meat : bone ratio of foal carcasses as it estimates the aptitude for meat production.
Biocontained Carcass Composting for Control of Infectious Disease Outbreak in Livestock
Reuter, Tim; Xu, Weiping; Alexander, Trevor W.; Gilroyed, Brandon H.; Inglis, G. Douglas; Larney, Francis J.; Stanford, Kim; McAllister, Tim A.
2010-01-01
Intensive livestock production systems are particularly vulnerable to natural or intentional (bioterrorist) infectious disease outbreaks. Large numbers of animals housed within a confined area enables rapid dissemination of most infectious agents throughout a herd. Rapid containment is key to controlling any infectious disease outbreak, thus depopulation is often undertaken to prevent spread of a pathogen to the larger livestock population. In that circumstance, a large number of livestock carcasses and contaminated manure are generated that require rapid disposal. Composting lends itself as a rapid-response disposal method for infected carcasses as well as manure and soil that may harbor infectious agents. We designed a bio-contained mortality composting procedure and tested its efficacy for bovine tissue degradation and microbial deactivation. We used materials available on-farm or purchasable from local farm supply stores in order that the system can be implemented at the site of a disease outbreak. In this study, temperatures exceeded 55°C for more than one month and infectious agents implanted in beef cattle carcasses and manure were inactivated within 14 days of composting. After 147 days, carcasses were almost completely degraded. The few long bones remaining were further degraded with an additional composting cycle in open windrows and the final mature compost was suitable for land application. Duplicate compost structures (final dimensions 25 m x 5 m x 2.4 m; L x W x H) were constructed using barley straw bales and lined with heavy black silage plastic sheeting. Each was loaded with loose straw, carcasses and manure totaling ~95,000 kg. A 40-cm base layer of loose barley straw was placed in each bunker, onto which were placed 16 feedlot cattle mortalities (average weight 343 kg) aligned transversely at a spacing of approximately 0.5 m. For passive aeration, lengths of flexible, perforated plastic drainage tubing (15 cm diameter) were placed between adjacent carcasses, extending vertically along both inside walls, and with the ends passed though the plastic to the exterior. The carcasses were overlaid with moist aerated feedlot manure (~1.6 m deep) to the top of the bunker. Plastic was folded over the top and sealed with tape to establish a containment barrier and eight aeration vents (50 x 50 x 15 cm) were placed on the top of each structure to promote passive aeration. After 147 days, losses of volume and mass of composted materials averaged 39.8% and 23.7%, respectively, in each structure. PMID:20461054
Biocontained carcass composting for control of infectious disease outbreak in livestock.
Reuter, Tim; Xu, Weiping; Alexander, Trevor W; Gilroyed, Brandon H; Inglis, G Douglas; Larney, Francis J; Stanford, Kim; McAllister, Tim A
2010-05-06
Intensive livestock production systems are particularly vulnerable to natural or intentional (bioterrorist) infectious disease outbreaks. Large numbers of animals housed within a confined area enables rapid dissemination of most infectious agents throughout a herd. Rapid containment is key to controlling any infectious disease outbreak, thus depopulation is often undertaken to prevent spread of a pathogen to the larger livestock population. In that circumstance, a large number of livestock carcasses and contaminated manure are generated that require rapid disposal. Composting lends itself as a rapid-response disposal method for infected carcasses as well as manure and soil that may harbor infectious agents. We designed a bio-contained mortality composting procedure and tested its efficacy for bovine tissue degradation and microbial deactivation. We used materials available on-farm or purchasable from local farm supply stores in order that the system can be implemented at the site of a disease outbreak. In this study, temperatures exceeded 55 degrees C for more than one month and infectious agents implanted in beef cattle carcasses and manure were inactivated within 14 days of composting. After 147 days, carcasses were almost completely degraded. The few long bones remaining were further degraded with an additional composting cycle in open windrows and the final mature compost was suitable for land application. Duplicate compost structures (final dimensions 25 m x 5 m x 2.4 m; L x W x H) were constructed using barley straw bales and lined with heavy black silage plastic sheeting. Each was loaded with loose straw, carcasses and manure totaling approximately 95,000 kg. A 40-cm base layer of loose barley straw was placed in each bunker, onto which were placed 16 feedlot cattle mortalities (average weight 343 kg) aligned transversely at a spacing of approximately 0.5 m. For passive aeration, lengths of flexible, perforated plastic drainage tubing (15 cm diameter) were placed between adjacent carcasses, extending vertically along both inside walls, and with the ends passed though the plastic to the exterior. The carcasses were overlaid with moist aerated feedlot manure (approximately 1.6 m deep) to the top of the bunker. Plastic was folded over the top and sealed with tape to establish a containment barrier and eight aeration vents (50 x 50 x 15 cm) were placed on the top of each structure to promote passive aeration. After 147 days, losses of volume and mass of composted materials averaged 39.8% and 23.7%, respectively, in each structure.
Authentication of beef versus horse meat using 60 MHz 1H NMR spectroscopy
Jakes, W.; Gerdova, A.; Defernez, M.; Watson, A.D.; McCallum, C.; Limer, E.; Colquhoun, I.J.; Williamson, D.C.; Kemsley, E.K.
2015-01-01
This work reports a candidate screening protocol to distinguish beef from horse meat based upon comparison of triglyceride signatures obtained by 60 MHz 1H NMR spectroscopy. Using a simple chloroform-based extraction, we obtained classic low-field triglyceride spectra from typically a 10 min acquisition time. Peak integration was sufficient to differentiate samples of fresh beef (76 extractions) and horse (62 extractions) using Naïve Bayes classification. Principal component analysis gave a two-dimensional “authentic” beef region (p = 0.001) against which further spectra could be compared. This model was challenged using a subset of 23 freeze–thawed training samples. The outcomes indicated that storing samples by freezing does not adversely affect the analysis. Of a further collection of extractions from previously unseen samples, 90/91 beef spectra were classified as authentic, and 16/16 horse spectra as non-authentic. We conclude that 60 MHz 1H NMR represents a feasible high-throughput approach for screening raw meat. PMID:25577043
Perkins, T L; Green, R D; Hamlin, K E; Shepard, H H; Miller, M F
1992-09-01
The objective of this study was to determine technician effects of live animal ultrasonic estimates of fat thickness (FTU) and longissimus muscle area (LMAU). Steers (n = 36) representing four breed-types (Brown Swiss, Average Zebu-cross Mexican, Corriente Mexican, and typical British crossbred) of commercial slaughter cattle were isonified to estimate accuracy and repeatability of fat thickness (FT) and longissimus muscle area (LMA) measurements by two experienced technicians. Repeated measures of FTU and LMAU were taken by technicians on two consecutive days with an Aloka 500V ultrasound unit equipped with a 3.5-MHz, 172-mm scanning width, linear-array transducer. Ultrasonic estimates of fat thickness and LMAU were taken at the 12th and 13th rib interface 48 h before slaughter; carcass fat thickness (FTC) and longissimus muscle area (LMAC) were measured 48 h postmortem. Means for FTU, FTC, LMAU, and LMAC were .91 +/- .36 cm, .82 +/- .40 cm, 70.7 +/- 9.43 cm2, and 72.4 +/- 8.9 cm2, respectively. Ultrasound and carcass measures of FT and LMA were different (P less than .01) among breed-types but were not different (P greater than .10) between technicians or for technician x breed-type interactions. Pooled simple correlation coefficients (P less than .01) were .87 and .86 between FTU and FTC and .76 and .82 between LMAU and LMAC for Technicians 1 and 2, respectively. Repeatabilities estimated by intraclass correlation methods were .91 +/- .03 and .81 +/- .06 for images repeated over 2 d and .95 +/- .02 and .83 +/- .05 for images repeated by two technicians for FT and LMA, respectively.(ABSTRACT TRUNCATED AT 250 WORDS)
Abley, Melanie J; Wittum, Thomas E; Zerby, Henry N; Funk, Julie A
2012-02-01
Salmonella and Campylobacter cause a significant number of human illnesses globally, most of which are food related. Cattle can be asymptomatic carriers of both of these pathogens. The objective of this study was to determine the association between the concentration of Salmonella and Campylobacter pre- and postharvest in cattle. Samples were collected from each of 98 individually identified cattle during the periharvest and postharvest period. For each animal, four different phases were sampled: on farm (fecal sample), poststunning and exsanguination (hide sponge and rectal content sample [lairage]), prechilling (carcass sponge), and final product (ground meat). Salmonella and Campylobacter were cultured and quantified at each stage by using the direct dilution and most probable number (MPN) method. Salmonella was not isolated from any sample. The proportion (%) of samples that were Campylobacter positive was 77, 82, 97, 55, and 12 for farm, rectal content, hide, carcass, and meat samples respectively. The mean Campylobacter concentration for each sample was as follows: fecal sample from farm, 3.7×10(4) cfu/g; rectal content sample from lairage, 1.6×10(5) cfu/g; hide sponge, 0.9 cfu/cm(2); carcass sponge, 8.7 cfu/half carcass; and meat, 1.1 cfu/g. There were no associations between Campylobacter concentrations for any two sample types. This lack of association could indicate that there is an environmental reservoir that can contaminate the final meat product, or since the majority of animals were positive entering the slaughter process, that the process itself reduces the load of Campylobacter regardless of the initial concentration. In addition, contamination of beef may be more strongly associated with periharvest practices than animal carriage rates.
Jordan, D; McEwen, S A; Lammerding, A M; McNab, W B; Wilson, J B
1999-06-29
A Monte Carlo simulation model was constructed for assessing the quantity of microbial hazards deposited on cattle carcasses under different pre-slaughter management regimens. The model permits comparison of industry-wide and abattoir-based mitigation strategies and is suitable for studying pathogens such as Escherichia coli O157:H7 and Salmonella spp. Simulations are based on a hierarchical model structure that mimics important aspects of the cattle population prior to slaughter. Stochastic inputs were included so that uncertainty about important input assumptions (such as prevalence of a human pathogen in the live cattle-population) would be reflected in model output. Control options were built into the model to assess the benefit of having prior knowledge of animal or herd-of-origin pathogen status (obtained from the use of a diagnostic test). Similarly, a facility was included for assessing the benefit of re-ordering the slaughter sequence based on the extent of external faecal contamination. Model outputs were designed to evaluate the performance of an abattoir in a 1-day period and included outcomes such as the proportion of carcasses contaminated with a pathogen, the daily mean and selected percentiles of pathogen counts per carcass, and the position of the first infected animal in the slaughter run. A measure of the time rate of introduction of pathogen into the abattoir was provided by assessing the median, 5th percentile, and 95th percentile cumulative pathogen counts at 10 equidistant points within the slaughter run. Outputs can be graphically displayed as frequency distributions, probability densities, cumulative distributions or x-y plots. The model shows promise as an inexpensive method for evaluating pathogen control strategies such as those forming part of a Hazard Analysis and Critical Control Point (HACCP) system.
Duarte, Marcio de Souza; Paulino, Pedro Veiga Rodrigues; Valadares Filho, Sebastião de Campos; Paulino, Mario Fonseca; Detmann, Edenio; Zervoudakis, Joanis Tilemahos; Monnerat, João Paulo Ismerio dos Santos; Viana, Gabriel da Silva; Silva, Luiz Henrique P; Serão, Nicola Vergara Lopes
2011-04-01
The effects of two levels of concentrate and ruminally undegradable protein (RUP) on performance, intake, digestibility, carcass characteristics, meat quality traits, and commercial cuts yield were assessed. Twenty crossbred heifers (240 kg average body weight) were used. At the beginning of the trial, four animals were slaughtered as reference group and the 16 remaining animals were randomly assigned to four treatments, in a 2 × 2 factorial design: two levels of concentrate (40% and 80%, dry matter (DM) basis) and two levels of RUP (48.79% and 27.19% of CP). At the end of the trial, all the animals were slaughtered. There was no interaction (P > 0.05) between concentrate and RUP levels. Dry matter intake and nutrients digestibility was not affected (P > 0.05) by RUP level. Heifers fed the highest RUP level had greater (P < 0.05) average daily gain (ADG). Concentrate level did not affect (P > 0.05) DMI and ADG. Heifers fed diets with 80% concentrate had greater intake of TDN and EE, and lower intake of NDF (P < 0.05). The digestibilities of all nutrients, except the NDF, were greater (P < 0.05) for the 80% concentrate diets. The RUP levels did not affect (P > 0.05) the carcass characteristics and carcass gain composition. Heifers fed 80% concentrate diets had larger (P < 0.05) longissimus muscle area and lower gain of bones (P < 0.05). Concentrate level did not affect (P > 0.05) the composition of carcass gain. There was no effect (P > 0.05) of RUP and concentrate levels on meat quality traits and commercial cut yields.
Moran, Lara; Andres, Sonia; Allen, Paul; Moloney, Aidan P
2018-08-01
Visible-near infrared spectroscopy (Vis-NIRS) has been suggested to have potential for authentication of food products. The aim of the present preliminary study was to assess if this technology can be used to authenticate the ageing time (3, 7, 14 and 21 days post mortem) of beef steaks from three different muscles (M. Longissimus thoracis, M. Gluteus medius and M. Semitendinosus). Various mathematical pre-treatments were applied to the spectra to correct scattering and overlapping effects, and then partial least squares-discrimination analysis (PLS-DA) procedures applied. The best models were specific for each muscle, and the ability of prediction of ageing time was validated using full (leave-one-out) cross-validation, whereas authentication performance was evaluated using the parameters of sensitivity, specificity and overall correct classification. The results indicate that overall correct classification ranging from 94.2 to 100% was achieved, depending on the muscle. In conclusion, Vis-NIRS technology seems a valid tool for the authentication of ageing time of beef steaks. Copyright © 2018 Elsevier Ltd. All rights reserved.
Thornton, K J; Richard, R P; Colle, M J; Doumit, M E; de Veth, M J; Hunt, C W; Murdoch, G K
2015-09-01
We hypothesized that variable composition in finishing rations, more specifically; the proportion of potato-by-product (PBP) and rumen protected histidine (His) supplementation may influence growth and meat quality attributes. Two different diets were fed (1) finishing ration with corn and barley as grains (CB, n = 20) and (2) substitution of 10% corn, DM basis, with PBP (PBP, n = 20). Additionally, half of each dietary treatment received 50 g/hd/d rumen protected His (HS, n= 20) while the other half received no supplement (NS, n = 20). Inclusion of 10% PBP or HS did not affect growth or carcass traits. Color stability was analyzed using Hunter color values as well as AMSA visual appraisal in both longissimus thoracis (LT) and gluteus medius (GM) muscles. The LT, but not the GM, of CB steers was more color stable over a 9 d simulated retail display compared to those fed a PB diet. Steers receiving HS produced significantly (P < 0.05) more color stable LT and GM steaks. Copyright © 2015 Elsevier Ltd. All rights reserved.
Van Donkersgoed, Joyce; Manninen, Ken; Potter, Andy; McEwen, Scott; Bohaychuk, Valerie; Klashinsky, Sandy; Deckert, Anne; Irwin, Rebecca
2003-09-01
A survey to estimate the prevalence of antimicrobial resistance in Escherichia coli was conducted in 7 Canadian federally inspected processing plants during 2001. Escherichia coli isolates were recovered during routine hazard analysis critical control point sampling from beef carcasses and trim and subsequently tested for their antimicrobial susceptibility by using susceptibility panels. Of the 2653 isolates analyzed, 68% were sensitive to all 18 antimicrobials tested. For 14 of the 18 antimicrobials evaluated, the percentage of resistant isolates was < or = 1. Twenty-five percent of the isolates were resistant to tetracycline, 9% to sulfamethoxazole, 7% to streptomycin, and 3% to ampicillin. Multiple resistance was found in 12% of the isolates, with 7% showing resistance to 2 antimicrobials, 2% to 3 antimicrobials, 2% to 4 antimicrobials, and 1% to 5 or more antimicrobials. Forty-five different antimicrobial resistance patterns were observed. The reasons for the development of the antimicrobial resistance were not investigated in this study. This study was useful as a pilot to help to develop a national antimicrobial resistance surveillance program in Canada. This study indicates that laboratory standardization is possible for consistent results across the country and that the indicator organism, E. coli, is fairly easy to obtain for surveillance but Salmonella are not, due to their low prevalence in beef.
Van Donkersgoed, Joyce; Manninen, Ken; Potter, Andy; McEwen, Scott; Bohaychuk, Valerie; Klashinsky, Sandy; Deckert, Anne; Irwin, Rebecca
2003-01-01
A survey to estimate the prevalence of antimicrobial resistance in Escherichia coli was conducted in 7 Canadian federally inspected processing plants during 2001. Escherichia coli isolates were recovered during routine hazard analysis critical control point sampling from beef carcasses and trim and subsequently tested for their antimicrobial susceptibility by using susceptibility panels. Of the 2653 isolates analyzed, 68% were sensitive to all 18 antimicrobials tested. For 14 of the 18 antimicrobials evaluated, the percentage of resistant isolates was ≤ 1. Twenty-five percent of the isolates were resistant to tetracycline, 9% to sulfamethoxazole, 7% to streptomycin, and 3% to ampicillin. Multiple resistance was found in 12% of the isolates, with 7% showing resistance to 2 antimicrobials, 2% to 3 antimicrobials, 2% to 4 antimicrobials, and 1% to 5 or more antimicrobials. Forty-five different antimicrobial resistance patterns were observed. The reasons for the development of the antimicrobial resistance were not investigated in this study. This study was useful as a pilot to help to develop a national antimicrobial resistance surveillance program in Canada. This study indicates that laboratory standardization is possible for consistent results across the country and that the indicator organism, E. coli, is fairly easy to obtain for surveillance but Salmonella are not, due to their low prevalence in beef. PMID:14524625
Influence of two dietary fats on the composition of emu oil and meat.
Beckerbauer, L M; Thiel-Cooper, R; Ahn, D U; Sell, J L; Parrish, F C; Beitz, D C
2001-02-01
Male and female emus were fed a diet rich in saturated fat (beef tallow) or a diet rich in unsaturated fat (soybean oil) until they weighed about 35 kg. Samples of subcutaneous and retroperitoneal adipose tissues and samples of six major meat cuts were taken for determination of composition. Emus fed the two different diets grew at similar rates, but the male emus had a higher percentage of carcass fat. The adipose tissue cells from males were larger than those from females. All six meat cuts averaged 2.2% fat, with the regular filet having the most and the inside and outside drums the least. Cholesterol concentration of all sizes of meat cuts averaged 32.2 mg/100 g meat. Diet did not influence cholesterol content of the rendered oil. Fan filets had the greatest concentration of cholesterol, and the inside and outside drums had the least. Source of dietary fat had no effect on fat and cholesterol content of the meats. Meat from emus fed beef tallow was more tender and juicy. Fan filets were the most tender meat, had the least intense flavor, and were the most flavorful. Untrained panelists were able to discriminate between emu meat and beef. Source of dietary fat did not influence the fatty acid compositions of the meats. As expected, the soybean oil-fed emus produced oil that was more polyunsaturated than did the tallow-fed emus.
Genetic relationship between cyclic ovarian activity in heifers and cows and beef traits in males
Mialon, Marie-Madeleine; Renand, Gilles; Krauss, Daniel; Ménissier, François
2001-01-01
Records were collected in an experimental herd over an 11-year period from purebred Charolais heifers (n = 351), cows (n = 615) and young entire bulls (n = 383). The objective of the study was to estimate the genetic relationship between the components of female ovarian activity (age at puberty and postpartum anoestrus length), their growth rate and body condition score and beef traits measured on related bulls. Two methods were used to estimate age at puberty and postpartum anoestrus length: the detection of oestrous behaviour and a test of cyclicity based on plasmatic progesterone assay. This study shows the existence of significant heritability estimates for the different cyclicity traits (h2 between 0.11 and 0.38). Most of the genetic correlation coefficients between ovarian activity and growth rate of females and males are negative and favourable (rg between -0.43 and 0.06). Cyclicity is also favourably related with body condition score in young or adult females (rg between -0.65 and -0.22). The genetic relationship between female ovarian activity and proportion of adipose tissue in the male carcass is, however, close to zero. These results show that an antagonism between male beef traits measured in this study and female ovarian activity is unlikely to be a cause for concern in the short term. PMID:11403748
Carrasco, C; Medel, P; Fuentetaja, A; Ranilla, M J; Carro, M D
2016-10-01
The aim of this study was to assess the effects of malate salts and culture on growth performance, carcass quality, ruminal fermentation products, and blood metabolites in heifers raised under southern Europe practical farm conditions. A total of 108 Charolaise cross heifers (214 ± 27.3 kg BW and 6.4 ± 1.1 mo of age) were housed in 18 pens of 6 animals each and used in a 114-d feedlot study. There was a totally randomized experimental design, and 6 pens were assigned to each of the following experimental diets: a control (no supplementation), the control plus 4 g of disodium/calcium malate mixture per kilogram of concentrate (2.12 g malate/kg), and the control plus 0.15 g of CBS 493.94 per kilogram of concentrate (1.5 × 10 cfu/kg). The control diet consisted of wheat-barley-based pelleted concentrate (32% starch, DM basis) and full-length barley straw. Concentrate and straw were fed separately ad libitum (5% orts) in an 88:12 ratio. On Days 0, 56, and 114, ruminal fluid and blood samples were obtained from each heifer between 2 and 2.5 h after the morning feeding by ruminocentesis and tail venipuncture, respectively. Body weight, concentrate ADFI, and G:F were recorded at 28, 56, 84, and 114 d. At slaughter, hot carcass weight and yield and carcass classification were determined in 2 representative heifers per pen (12 animals per dietary treatment). Supplementation with malate salts or did not affect concentrate ADFI ( = 0.98), ADG ( = 0.74), or G:F ( = 0.50) at any time during the experiment. At slaughter, there were no differences in carcass weight ( = 0.86), classification ( = 0.18), or carcass yield ( = 0.84) among experimental groups. Also, there were no differences treatments on ruminal pH ( = 0.24), ruminal fermentation products ( = 0.69, = 0.88, and = 0.93 for total VFA, NH-N, and lactate, respectively), and blood metabolites ( = 0.96, = 0.82, and = 0.15 for glucose, urea N, and lactate, respectively). In conclusion, under the feeding and management conditions of this study, diet supplementation with malate salts or did not have any significant effects on growth performance, carcass quality, ruminal fermentation products, and blood metabolites.
Genetic relationships between feed efficiency in growing males and beef cow performance.
Crowley, J J; Evans, R D; Mc Hugh, N; Kenny, D A; McGee, M; Crews, D H; Berry, D P
2011-11-01
Most studies on feed efficiency in beef cattle have focused on performance in young animals despite the contribution of the cow herd to overall profitability of beef production systems. The objective of this study was to quantify, using a large data set, the genetic covariances between feed efficiency in growing animals measured in a performance-test station, and beef cow performance including fertility, survival, calving traits, BW, maternal weaning weight, cow price, and cull cow carcass characteristics in commercial herds. Feed efficiency data were available on 2,605 purebred bulls from 1 test station. Records on cow performance were available on up to 94,936 crossbred beef cows. Genetic covariances were estimated using animal and animal-dam linear mixed models. Results showed that selection for feed efficiency, defined as feed conversion ratio (FCR) or residual BW gain (RG), improved maternal weaning weight as evidenced by the respective genetic correlations of -0.61 and 0.57. Despite residual feed intake (RFI) being phenotypically independent of BW, a negative genetic correlation existed between RFI and cow BW (-0.23; although the SE of 0.31 was large). None of the feed efficiency traits were correlated with fertility, calving difficulty, or perinatal mortality. However, genetic correlations estimated between age at first calving and FCR (-0.55 ± 0.14), Kleiber ratio (0.33 ± 0.15), RFI (-0.29 ± 0.14), residual BW gain (0.36 ± 0.15), and relative growth rate (0.37 ± 0.15) all suggest that selection for improved efficiency may delay the age at first calving, and we speculate, using information from other studies, that this may be due to a delay in the onset of puberty. Results from this study, based on the estimated genetic correlations, suggest that selection for improved feed efficiency will have no deleterious effect on cow performance traits with the exception of delaying the age at first calving.
Schneider, L G; Stromberg, Z R; Lewis, G L; Moxley, R A; Smith, D R
2018-03-25
Cattle hides are an important source of enterohaemorrhagic Escherichia coli (EHEC) carcass contamination at slaughter. Seven EHEC serogroups are adulterants in raw, non-intact beef: EHEC O26, O45, O103, O111, O121, O145 and O157. The objective of this study was to estimate the probability for hide contamination with EHEC among US market beef cows at slaughter and to test the effects of season and geographic region on prevalence of hide contamination. Hides (n = 800) of market cows were swabbed at slaughter immediately after exsanguination, prior to hide removal. Cows were sampled from two geographically distinct beef packing plants during four seasons of 2015. Cattle source was categorized by northern or southern region. Samples were tested for EHEC by a molecular screening assay. The effects of region, season and their interaction on the probability of hide contamination by each EHEC serogroup were tested in separate multilevel multivariable logistic regression models, accounting for the random effect of clustering by plant. Statistical significance was set α = .05. Of 800 total samples, at least one EHEC was detected on 630 (79%) hides. Enterohaemorrhagic E. coli O26 was detected on 129 (16%) of all hides sampled, EHEC O45 on 437 (55%), EHEC O103 on 289 (36%), EHEC O111 on 189 (24%), EHEC O121 on 140 (18%), EHEC O145 on 171 (21%) and EHEC O157 on 89 (11%). Detection of EHEC O26 and EHEC O121 was associated with season. Season and region were associated with detecting EHEC O45 and EHEC O157. Season-by-region interactions were associated with the outcome of detecting EHEC O103, EHEC O111 and EHEC O145. Season, region of origin and the interaction of these factors affect hide contamination of market beef cattle at slaughter by EHEC, and each serogroup responds to these factors uniquely. © 2018 Blackwell Verlag GmbH.
Using reflectance spectroscopy to predict beef tenderness.
Bowling, M B; Vote, D J; Belk, K E; Scanga, J A; Tatum, J D; Smith, G C
2009-05-01
A study was conducted to determine if reflectance measurements made in the near-infrared region of the spectrum were additive to reflectance measurements made in the visible region of the spectrum for predicting Warner-Bratzler shear force (WBSF) values. Eighty seven strip loins were collected following fabrication over 3d at a commercial beef processing facility from heifer carcasses with Slight or Traces marbling scores. Spectroscopic measurements were made at approximately 50h postmortem using a Hunter-Lab UltraScan. Subsequently, all strip loins were aged for 14d, cooked to an internal temperature of 70°C, and sheared to obtain WBSF values. Reflectance measurements obtained in the near-infrared region of the spectrum were correlated with WBSF values, however, these measurements were not additive to the predictive ability of reflectance measurements (R(2) values did not differ) made in the visible portion of the spectrum when the use of broad-band wavelength filters were simulated. It was therefore determined, that both the visible and near-infrared spectra measure reflectance and that both methods are acceptable methods of tenderness prediction.
Kim, Yuan H Brad; Liesse, Charlotte; Kemp, Robert; Balan, Prabhu
2015-12-01
The objective of our study was to evaluate the combined effects of ageing period and different freezing rates on meat quality attributes of beef loins. Pairs of loins (M. longissimus at 1 day post mortem) from 12 carcasses were divided into four equal portions and randomly assigned to four ageing/freezing treatments (aged only, frozen only, and 3 or 4 weeks ageing at -1.5°C then frozen). Two freezing methods (fast freezing by calcium chloride immersion or slow freezing by air freezer at -18°C) were applied to the loin sections. Fast freezing had no effect on shear force (P>0.05), but significantly improved the water-holding capacity of the aged/frozen loins by reducing purge and drip losses. Ageing-then-freezing significantly improved shear force values of loins compared to both the aged only and frozen only loins. These observations suggest that fast freezing will add more value to the aged/frozen/thawed meat by minimising the amount of water-loss due to the freezing/thawing process. Copyright © 2015 Elsevier Ltd. All rights reserved.
Mc Geough, E J; O'Kiely, P; Hart, K J; Moloney, A P; Boland, T M; Kenny, D A
2010-08-01
This study aimed to quantify the methane emissions and feed intake, performance, carcass traits, digestibility, and rumen fermentation characteristics of finishing beef cattle offered diets based on whole-crop wheat (WCW) silages differing in grain content and to rank these relative to diets based on grass silage (GS) and ad libitum concentrates (ALC). In Exp. 1, a total of 90 continental crossbred steers [538 +/- 27.6 kg of BW (mean +/- SD)] were blocked by BW and assigned in a randomized complete block design to 1 of 6 treatments based on 4 WCW silages [grain-to-straw plus chaff ratios of 11:89 (WCW I), 21:79 (WCW II), 31:69 (WCW III), and 47:53 (WCW IV)], GS, and ALC. Increasing grain content in WCW silage resulted in a quadratic (P = 0.01) response in DMI, with a linear (P < 0.001) increase in carcass gain [CG; 577 (WCW I), 650 (WCW II), 765 (WCW III), and 757 g/d (WCW IV)]. The G:F also increased linearly (P < 0.001) in response to increasing the grain content of WCW silage. A quadratic (P < 0.01) response in daily methane output [295 (WCW I), 315 (WCW II), 322 (WCW III), and 273 g/d (WCW IV)], measured using the sulfur hexafluoride tracer technique, was observed in response to increasing the grain content of WCW; however, linear decreases were observed when expressed relative to DMI (P = 0.01) and CG (P < 0.001). Cattle offered GS exhibited carcass gains similar to those offered WCW silage diets and had greater methane emissions than cattle in any other treatment when expressed relative to DMI. Cattle offered ALC exhibited greater (P < 0.01) carcass gains and decreased (P < 0.001) methane emissions, irrespective of the unit of expression, compared with cattle in any of the silage-based treatments. In Exp. 2, rumen fermentation parameters were determined using 4 ruminally cannulated Rotbunde-Holstein steers (413 +/- 30.1 kg of BW) randomly allocated among WCW I, the average of WCW II and III (WCW II/III), WCW IV, and GS in a 4 x 4 Latin square design. Ruminal pH and total VFA concentration did not differ across dietary treatments. Molar proportion of acetic acid decreased (P = 0.01), with propionic acid tending to increase (P = 0.06) with increasing grain content. It was concluded that increasing the grain content of WCW silage reduced methane emissions relative to DMI and CG and improved animal performance. However, the relativity of GS to WCW in terms of methane emissions was dependent on the unit of expression used. Cattle offered ALC exhibited decreased methane emissions and greater performance than those offered any of the silage-based treatments.
Takanishi, N; Oishi, K; Kumagai, H; Uemura, M; Hirooka, H
2015-12-01
The factors influencing the priority of access to food and the effects of the priority of access to food on their carcass traits were analyzed for Japanese Black (Wagyu) cattle in a semi-intensive fattening production system. The records of 96 clinically healthy steers and heifers were analyzed. The calves at ∼3 to 4 months of age were allocated to pens with four animals per pen; all four animals in the same pen were of the same sex and of similar body size. The ranking of the animals' priority of access to food (1st, 2nd, 3rd and 4th), which was determined by the farm manager, was used as an indicator of social dominance in the present study. Four models including sire line, maternal grandsire line and the difference in the animals' birth dates as fixed effects were used to analyze factors influencing the priority of access to food. Ranking was represented by ordinal scores (highest=4, lowest=1) in Model 1, and the binary scores were assigned in Model 2 (highest=1; 2nd, 3rd and 4th=0), Model 3 (1st and 2nd=1; 3rd and 4th=0) and Model 4 (1st, 2nd and 3rd=1; lowest=0). The results showed that the difference in the animals' birth dates had a significant effect on the establishment of the priority of access to food in Model 3 (P<0.05), suggesting that animals born earlier may become more dominant in the pen. The maternal grandsire line tended to affect the social rank score in Models 2 and 3 (P<0.10). Our results indicated that the maternal grandsire line may affect the temperament of calves through their mothers' genetic performance and thereby more aggressive calves may be more dominant and have higher priority of access to food. On the other hand, there was a significant effect of the priority of access to food on beef marbling score (BMS; P<0.05), and the priority of access to food also tended to influence the carcass weight (P=0.09). The highest BMS was observed for animals with the first rank of the priority of access to food (P<0.05), and the higher-ranking animals had the tendency to be heavier carcass than the lower-ranking animals. Our findings emphasized the importance of information about the priority of access to food determined by farmers' own observation on implementing best management practices in small-scaled semi-intensive beef cattle production systems.
Active Search on Carcasses versus Pitfall Traps: a Comparison of Sampling Methods.
Zanetti, N I; Camina, R; Visciarelli, E C; Centeno, N D
2016-04-01
The study of insect succession in cadavers and the classification of arthropods have mostly been done by placing a carcass in a cage, protected from vertebrate scavengers, which is then visited periodically. An alternative is to use specific traps. Few studies on carrion ecology and forensic entomology involving the carcasses of large vertebrates have employed pitfall traps. The aims of this study were to compare both sampling methods (active search on a carcass and pitfall trapping) for each coleopteran family, and to establish whether there is a discrepancy (underestimation and/or overestimation) in the presence of each family by either method. A great discrepancy was found for almost all families with some of them being more abundant in samples obtained through active search on carcasses and others in samples from traps, whereas two families did not show any bias towards a given sampling method. The fact that families may be underestimated or overestimated by the type of sampling technique highlights the importance of combining both methods, active search on carcasses and pitfall traps, in order to obtain more complete information on decomposition, carrion habitat and cadaveric families or species. Furthermore, a hypothesis advanced on the reasons for the underestimation by either sampling method showing biases towards certain families. Information about the sampling techniques indicating which would be more appropriate to detect or find a particular family is provided.
MEAT SCIENCE AND MUSCLE BIOLOGY SYMPOSIUM--anabolic implants and meat quality.
Duckett, S K; Pratt, S L
2014-01-01
Anabolic implants are routinely used in the finishing phase of beef production to improve animal performance and feed efficiency. Implanting during the feedlot phase on average increases ADG 18%, feed intake 6%, feed efficiency 8%, carcass weight 5%, and ribeye area 4% compared with nonimplanted controls. Implants reduce the cost of beef production, which is important given current high feed costs and beef prices. In a 1996 review of 37 implant trials, the use of a combination (i.e., estrogenic and trenbolone acetate) implant increased returns by US$77/head compared with nonimplanted steers. If calculated using today's prices, a combination implant would increase returns by $163/head. However, concerns about potential negative effects of implants on marbling scores, quality grades, and tenderness exist. Changes in Warner-Bratzler shear force values of steaks from implanted steers are small (<0.5 kg) and appear related to an increase in initial tenderness, possibly due to hypertrophy of muscle fiber, instead of alterations in postmortem proteolysis. The increase in ribeye size observed with implanting may also reduce marbling scores through a dilution effect. The impact of anabolic implants on gene expression has shown that implanting downregulates expression of certain lipogenic genes (e.g., stearoyl-CoA desaturase, fatty acid synthetase, fatty acid elongase-6) in steers with low quality grades (Select-) but not in implanted steers with high quality grades (Choice-). Examination of the adipocyte's transcriptome has shown that 36 genes were differentially expressed due to implant treatment. More research is needed to further determine how anabolic implants alter lipogenic gene expression to address changes in marbling deposition with implant usage. Given our current high feed costs and cattle prices, anabolic implants are one of the most cost-effective technologies that can be used in beef production systems.
Kiermeier, Andreas; Mellor, Glen; Barlow, Robert; Jenson, Ian
2011-04-01
The aims of this work were to determine the distribution and concentration of Escherichia coli O157 in lots of beef destined for grinding (manufacturing beef) that failed to meet Australian requirements for export, to use these data to better understand the performance of sampling plans based on the binomial distribution, and to consider alternative approaches for evaluating sampling plans. For each of five lots from which E. coli O157 had been detected, 900 samples from the external carcass surface were tested. E. coli O157 was not detected in three lots, whereas in two lots E. coli O157 was detected in 2 and 74 samples. For lots in which E. coli O157 was not detected in the present study, the E. coli O157 level was estimated to be <12 cells per 27.2-kg carton. For the most contaminated carton, the total number of E. coli O157 cells was estimated to be 813. In the two lots in which E. coli O157 was detected, the pathogen was detected in 1 of 12 and 2 of 12 cartons. The use of acceptance sampling plans based on a binomial distribution can provide a falsely optimistic view of the value of sampling as a control measure when applied to assessment of E. coli O157 contamination in manufacturing beef. Alternative approaches to understanding sampling plans, which do not assume homogeneous contamination throughout the lot, appear more realistic. These results indicate that despite the application of stringent sampling plans, sampling and testing approaches are inefficient for controlling microbiological quality.
Yasuda, Kaori; Kitagawa, Masayuki; Oishi, Kazato; Hirooka, Hiroyuki; Tamura, Takemi; Kumagai, Hajime
2016-07-01
This study was conducted to determine the effects of dietary soybean curd residue (SCR) and soy sauce cake (SSC) on the growth performance, carcass traits and physiochemical and intramuscular fatty acid (FA) characteristics in Japanese Black steers. Ten steers (29.7 ± 0.3 months old, 856.6 ± 24.4 kg body weight) were assigned to either treatment C, fed a conventional concentrate or T, fed the test diet including dried SCR and SSC for 3 months. In growth performance, dry matter (DM) intake and average daily gain, and carcass traits did not differ significantly between the treatments. Color of beef was affected by the dietary treatments and meat samples from T showed higher a(*) value and chroma than those in C. On FA composition, there was no significant difference between the treatments in neutral lipids, whereas in polar lipids, meat samples from T had higher C16:1 (P < 0.05) and tended to have higher C16:0 (P = 0.05) and C18:1 (P = 0.08), but lower C17:0 (P = 0.098), C18:2 (P = 0.06) and C20:4 (P = 0.07) than those from C. The study suggested that SCR and SSC could be used as a substitute for conventional concentrate and would influence meat color and intramuscular FA composition of polar lipids. © 2015 Japanese Society of Animal Science.
Muhlisin; Song, Chang Soo; Rhee, Yong Joon; Song, Young Han; Lee, Sung Ki
2016-01-01
The carcass traits and meat quality of Hanwoo (Korean native cattle) whose diets were supplemented with direct-fed microbial (DFM) and pine cone extract (PCE) were evaluated. Twenty head of Hanwoo steers were divided equally into four groups and for a period of 6 months were given different diets: One group was fed a basal diet as control (CON), the other three groups were fed a basal diet supplemented with DFM-1%, DFM+PCE-1% and DFM+PEC-3%, respectively. DFM+PCE3% diet resulted the lowest carcass quality grade. The loins of DFM-1% contained higher moisture and lower fat than did the loins from the CON group. The crude protein content of DFM+PCE-3% group was significantly higher than that of the other groups. The water holding capacity and Warner-Bratzler shear force of the DFM+PCE-1% and 3% groups were lower than those of the CON and DFM-1% groups. The DFM-1% and 3% groups contained lower saturated fatty acid, higher unsaturated fatty acid, mono-unsaturated fatty acid, and poly-unsaturated fatty acid than did CON and DFM+PCE 1% group. Moreover, the n6:n3 ratios of DFM-1% and DFM+PCE-1% and 3% groups were slightly lower than that of the CON group. Thus we concluded that DFM and PCE supplementation resulted healthier Hanwoo beef with lower fat content and n6:n3 ratio. PMID:26954123
Authentication of beef versus horse meat using 60 MHz 1H NMR spectroscopy.
Jakes, W; Gerdova, A; Defernez, M; Watson, A D; McCallum, C; Limer, E; Colquhoun, I J; Williamson, D C; Kemsley, E K
2015-05-15
This work reports a candidate screening protocol to distinguish beef from horse meat based upon comparison of triglyceride signatures obtained by 60 MHz (1)H NMR spectroscopy. Using a simple chloroform-based extraction, we obtained classic low-field triglyceride spectra from typically a 10 min acquisition time. Peak integration was sufficient to differentiate samples of fresh beef (76 extractions) and horse (62 extractions) using Naïve Bayes classification. Principal component analysis gave a two-dimensional "authentic" beef region (p=0.001) against which further spectra could be compared. This model was challenged using a subset of 23 freeze-thawed training samples. The outcomes indicated that storing samples by freezing does not adversely affect the analysis. Of a further collection of extractions from previously unseen samples, 90/91 beef spectra were classified as authentic, and 16/16 horse spectra as non-authentic. We conclude that 60 MHz (1)H NMR represents a feasible high-throughput approach for screening raw meat. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.
Comparison of dairy beef genetics and dietary roughage levels.
Lehmkuhler, J W; Ramos, M H
2008-06-01
The objectives of these trials were to investigate the performance of Jersey steers in relation to Holsteins under current management practices when fed diets differing in energy density and subsequent effects on carcass characteristics. In experiment 1, twelve Jersey and 12 Holstein steers were offered dietary treatments with differing roughage levels. Roughage levels investigated on a dry matter basis were 55% reduced to 25% versus 25% followed by 12.5% (HIGH and LOW, respectively) with all animals receiving the same finishing diet containing 6.5% roughage. Holstein steers were heavier than Jerseys at the initiation of the trial (228 vs. 116 kg). A diet response was observed for gain efficiency during the first period in which LOW was greater than HIGH. Holstein steers had higher dry matter intakes and rates of gain than Jerseys. However, gain efficiency was better for Jersey steers during the first and last periods. Carcass traits were influenced by breed but not diet. Holsteins had heavier hot carcass weights, greater dressing percentages, more backfat, and larger longissimus muscle area, whereas marbling scores were similar to Jerseys. The increased efficiency of Jersey steers and significant reduction in carcass value due to light carcass weights suggested that Jersey steers should be fed to heavier live weights. Experiment 2 utilized 85 steers to investigate continuous feeding of a low-roughage, high-concentrate diet versus a phase-feeding strategy. Jersey (n = 40) and Holstein (n = 45) steers were assigned to a diet containing 20% corn silage on a dry matter basis (HEN) or a phase-feeding program (PHASE) in which corn silage was reduced from 60 to 40% followed by the same diet as HEN. Initial body weights were similar for dietary treatments but differed by breed. A diet response was observed for live weight at the end of the first and second period, first period average daily gain (ADG), overall ADG, and days on feed with HEN having higher ADG than PHASE and fewer days on feed. Breed affected all body weight and gain variables with Holsteins being heavier and gaining more rapidly than Jersey steers. Jersey carcasses were lighter, had the highest percentage trim loss, least amount of backfat, and lowest numerical yield grade. Holstein steers had a greater propensity for gain, whereas the Jersey steers were equally or more efficient. These findings suggest that phase feeding Jersey steers higher-roughage diets has minimal effect on carcass traits.
Kosulwat, Somkiat; Greenfield, Heather; Buckle, Kenneth A
2003-12-01
The true retention of nutrients (proximate principles and cholesterol) on cooking of three retail cuts from lambs classified by weight, sex and fatness score was investigated. Fat retentions of the total cut and of the lean portion of lamb legs and mid-loin chops were not affected by carcass fatness, weight and sex or their interactions, however, the fat retention of the total cut and of the lean portion of forequarter chops was affected by fat score, with forequarter chops from fat score 1 retaining more fat than did chops of carcasses of higher fat score. Overall, fat was lost by all cuts (total cut) on cooking, with only 70-80% of fat being retained, but fat content of lean only increased on cooking (retention >100%), indicating the passage of fat into the lean portion from the external fat cover during the cooking process. Carcass factors and their interactions had little or no effect on the protein, water and ash retentions of the total cut or the lean portions of the three cuts. Cholesterol retention by the lean portion of three cooked lamb cuts was not affected by any carcass factors or their interactions. Cholesterol retentions were ∼99% for total cuts and tended to be ∼102% for the lean portions.
Yang, Seung Hak; Lim, Joung Soo; Khan, Modabber Ahmed; Kim, Bong Soo; Choi, Dong Yoon; Lee, Eun Young; Ahn, Hee Kwon
2015-01-01
The leachate generated by the decomposition of animal carcass has been implicated as an environmental contaminant surrounding the burial site. High-throughput nucleotide sequencing was conducted to investigate the bacterial communities in leachates from the decomposition of pig carcasses. We acquired 51,230 reads from six different samples (1, 2, 3, 4, 6 and 14 week-old carcasses) and found that sequences representing the phylum Firmicutes predominated. The diversity of bacterial 16S rRNA gene sequences in the leachate was the highest at 6 weeks, in contrast to those at 2 and 14 weeks. The relative abundance of Firmicutes was reduced, while the proportion of Bacteroidetes and Proteobacteria increased from 3–6 weeks. The representation of phyla was restored after 14 weeks. However, the community structures between the samples taken at 1–2 and 14 weeks differed at the bacterial classification level. The trend in pH was similar to the changes seen in bacterial communities, indicating that the pH of the leachate could be related to the shift in the microbial community. The results indicate that the composition of bacterial communities in leachates of decomposing pig carcasses shifted continuously during the study period and might be influenced by the burial site. PMID:26500442
Jericho, K W; Kozub, G C; Gannon, V P; Taylor, C M
2000-12-01
The efficacy of cold storage of raw, bagged, boxed beef was assessed microbiologically at a high-line-speed abattoir (270 carcasses per h). At the time of this study, plant management was in the process of creating a hazard analysis critical control point plan for all processes. Aerobic bacteria, coliforms, and type 1 Escherichia coli were enumerated (5 by 5-cm excision samples, hydrophobic grid membrane filter technology) before and after cold storage of this final product produced at six fabrication tables. In addition, the temperature-function integration technique (TFIT) was used to calculate the potential number of generations of E. coli during the first 24 or 48 h of storage of the boxed beef. Based on the temperature histories (total of 60 boxes, resulting from 12 product cuts, five boxes from each of two fabrication tables on each of 6 sampling days, and six types of fabrication tables), TFIT did not predict any growth of E. coli (with or without lag) for the test period. This was verified by E. coli mean log10 values of 0.65 to 0.42 cm2 (P > 0.05) determined by culture before and after the cooling process, respectively. Counts of aerobic bacteria and coliforms were significantly reduced (P < 0.001 and P < 0.05, respectively) during the initial period of the cooling process. There were significant microbiological differences (P < 0.05) between table-cut units.
Vaclavik, Lukas; Hrbek, Vojtech; Cajka, Tomas; Rohlik, Bo-Anne; Pipek, Petr; Hajslova, Jana
2011-06-08
A combination of direct analysis in real time (DART) ionization coupled to time-of-flight mass spectrometry (TOFMS) and chemometrics was used for animal fat (lard and beef tallow) authentication. This novel instrumentation was employed for rapid profiling of triacylglycerols (TAGs) and polar compounds present in fat samples and their mixtures. Additionally, fat isolated from pork, beef, and pork/beef admixtures was analyzed. Mass spectral records were processed by principal component analysis (PCA) and stepwise linear discriminant analysis (LDA). DART-TOFMS profiles of TAGs were found to be more suitable for the purpose of discrimination among the examined fat types as compared to profiles of polar compounds. The LDA model developed using TAG data enabled not only reliable classification of samples representing neat fats but also detection of admixed lard and tallow at adulteration levels of 5 and 10% (w/w), respectively. The presented approach was also successfully applied to minced meat prepared from pork and beef with comparable fat content. Using the DART-TOFMS TAG profiles of fat isolated from meat mixtures, detection of 10% pork added to beef and vice versa was possible.
Qekwana, Daniel Nenene; Oguttu, James Wabwire; Venter, Dries; Odoi, Agricola
2016-01-01
Bovine Taenia saginata cysticercus infections (also called bovine cysticercosis or beef measles) is usually diagnosed in cattle only during post-mortem meat inspection. The aim of this study was to investigate the identification rates of these infections in and to identify predictors/determinants of variations in the identification rates in abattoirs in Gauteng province, South Africa. Retrospective data for over 1.4 million cattle carcasses inspected in 26 abattoirs between January 2010 and December 2013 were used for the study. The identification rates (proportion of bovine Taenia saginata cysticercus positive carcasses) were computed and generalized estimating equations used to identify predictors/determinants of identification rates. The overall identification rate was 0.70% (95% CI: 0.45, 0.95). Significantly (p< 0.05) lower rates were reported during summer (0.55%) than other seasons. Some geographic areas reported significantly (p<0.05) higher rates than others. The identification rates in high throughput abattoirs was significantly (p<0.05) higher (RR: 9.4; 95% CI: 4.7-19.1) than in low throughput abattoirs. Similarly, the identification rates among animals from feedlots were significantly (p<0.05) higher (RR: 1.6; 95% CI: 1.7-3.5) than those from non-feedlot sources. No significant (p>0.05) association was identified between identification rates and either the number of meat inspectors per abattoir or the provider of inspection services. Although no significant association was found between identification rates and provider of inspection services, follow-up studies will need to be done to specifically investigate the potential conflict of interest arising from the fact that abattoir owners hire meat inspection services directly. Capture of abattoir surveillance data needs to include farm address and for each case to be reported separately. Finally, information on the type of identified cysts (alive or calcified) need to be collected to help better estimate risk to consumers. This study provides useful baseline data to guide future studies, surveillance and control efforts.
Igo, J L; VanOverbeke, D L; Woerner, D R; Tatum, J D; Pendell, D L; Vedral, L L; Mafi, G G; Moore, M C; McKeith, R O; Gray, G D; Griffin, D B; Hale, D S; Savell, J W; Belk, K E
2013-04-01
The National Beef Quality Audit (NBQA)-2011 benchmarked the current status of and assessed progress being made toward quality and consistency of U.S. cattle, carcasses, and beef products after the completion of the first NBQA in 1991. Unlike previous NBQA, objectives of the 2011 Phase I study were to determine how each beef market sector defined 7 quality categories, estimate willingness-to-pay (WTP) for the same quality categories by market sector, and establish a best-worst (B/W) scaling for the quality categories. Structured face-to-face interviews were conducted and responses were recorded using dynamic routing software over an 11-mo period (February to December 2011) with decision makers in each of the following beef market sectors: Feeders (n = 59), Packers (n = 26), Food Service, Distribution, and Further Processors (n = 48), Retailers (n = 30), and Government and Allied Industries (n = 47). All respondents participated in a structured interview consisting of WTP and B/W questions that were tied to 7 quality categories and then were asked to "define" each of the 7 categories in terms of what the category meant to them, resulting in completely unbiased results. The 7 quality categories were a) how and where the cattle were raised, b) lean, fat, and bone, c) weight and size, d) cattle genetics, e) visual characteristics, f) food safety, and g) eating satisfaction. Overall, "food safety" and "eating satisfaction" were the categories of greatest and second most importance, respectively, to all beef market sectors except for Feeders. Feeders ranked "how and where the cattle were raised" and "weight and size" as the most important and second most important, respectively. Overall, "how and where the cattle were raised" had the greatest odds of being considered a nonnegotiable requirement before the raw material for each sector would be considered for purchase and was statistically more important (P < 0.05) as a requirement for purchase than all other categories except "food safety." When all market sectors were considered, "eating satisfaction" was shown to generate the greatest average WTP percentage premium (11.1%), but that WTP premium value only differed statistically (P < 0.05) from "weight and size" (8.8%). Most notably, when a sector said that "food safety" was a nonnegotiable requirement, no sector was willing to purchase the product at a discounted price if the "food safety" of the product could not be assured.
Feeding feedlot steers fish oil alters the fatty acid composition of adipose and muscle tissue.
Wistuba, T J; Kegley, E B; Apple, J K; Rule, D C
2007-10-01
Sixteen steers (441±31.7kg initial body weight) consumed two high concentrate diets with either 0 or 3% fish oil to determine the impact of fish oil, an omega-3 fatty acid source, on the fatty acid composition of beef carcasses. Collected tissue samples included the Longissimus thoracis from the 6th to 7th rib section, ground 10th to 12th rib, liver, subcutaneous adipose tissue adjacent to the 12th rib, intramuscular adipose tissue in the 6th to 7th rib sections, perirenal adipose tissue, and brisket adipose tissue. Including fish oil in the diet increased most of the saturated fatty acids (P<0.01) and proportions of polyunsaturated fatty acids (P<0.06), and decreased (P<0.01) proportions of monounsaturated fatty acids. Dietary fish oil increased (P<0.01) levels of omega-3 fatty acids in sampled tissues, resulting in lower (P<0.01) omega-6:omega-3 ratios. The weight percentages of C20:5 and C22:6 in tissue may provide the recommended daily allowance for humans. Fish oil may have a role in beef niche marketing if there are no deleterious effects on consumer satisfaction.
Guifen, Liu; Fachun, Wan; Enliang, Song; Xiaomu, Liu; Xiuwen, Tan; Zhenshan, Liu
2011-10-01
Four groups of 12 young beef, as similar as possible with respect to age and weight, were fed a basic diet. The addition fed to four groups was 0, 200, 600, and 1,200 mg of organic chromium (chromium picolinate CrPic) per kg concentrated feed. The results showed that there was no effect on overall growth performance and dressing percentage and pure meat percentage when adding different CrPic content, but significant difference was found between 0 group and other three groups in percentage of high grade cuts (P < 0.05). The Cr content in Kidney, Musculus diaphragm, Semitendinosus muscles and Longissimusdorsi tissues have no difference in four groups (P > 0.05), but there was significant difference in liver tissues between 0, 200, 600 groups and 1200 group (P < 0.05). Gene expression analysis indicated that there were no differences in five genes expression in liver and muscle tissues in four groups (P > 0.05), but mRNA expression amount of FOX1, FSTL and MATR3 always had same trends whatever in liver or muscle tissues. However the RPLOP gene expression amount has large difference between liver and muscle.
Hunt, M R; Legako, J F; Dinh, T T N; Garmyn, A J; O'Quinn, T G; Corbin, C H; Rathmann, R J; Brooks, J C; Miller, M F
2016-06-01
Fatty acids (FA) in neutral and polar lipids (NL and PL) and volatile compounds were determined in Gluteus medius (GM), Longissimus lumborum (LL), Serratus ventralis (SV), and Semimembranosus (SM) muscles from upper 2/3 USDA Choice and Select quality grades (QG). Concentrations of NL FA (mg/g) were influenced by intramuscular fat (IMF) content being greater in upper 2/3 Choice compared with Select. The SV contained greater concentrations of NL FA; meanwhile, the SM contained the lowest quantities of NL FA. Percentages (g/100g of total FA) of NL SFA and MUFA were increased in beef with greater IMF content. Concentrations and percentages of PL FA had muscle specific differences between QG. Volatile compounds were primarily affected by muscle. Increases in SFA and MUFA were related with consumer liking, regardless of lipid fraction. Overall the influence of QG on SFA and MUFA was muscle specific. Therefore, each muscle may require specific considerations when considering FA, volatile compounds, and ultimately consumer liking. Copyright © 2016 Elsevier Ltd. All rights reserved.
Cleale, R M; Bechtol, D T; Drouillard, J S; Edmonds, J D; Edmonds, M; Hunsaker, B D; Kraft, L A; Lawrence, T E; Brewbaker, S; Waite, A R
2012-12-01
Synovex Plus (SP) is a product that delivers 28 mg of estradiol benzoate (EB) and 200 mg of trenbolone acetate (TBA). We studied the impact of a polymeric, porous coating on SP implants (CSP) to prolong release of EB and TBA, and stimulate feedlot performance of feedlot cattle for an extended period. In an explant study, 30 steers were implanted with SP in one ear and CSP in the contralateral ear. Cattle (n = 6/d) were necropsied 40, 81, 120, 160, and 200 d after treatment, and remaining EB and TBA were quantified. Linear regression of EB and TBA remaining as a function of time for each treatment were computed. Rates of EB and TBA depletion from SP were -0.1980 (r(2) = 0.9994) and -1.7073 mg/d (r(2) = 0.9644), respectively, and for CSP rates of EB and TBA depletion were -0.1049 (r(2) = 0.9123) and -0.9466 mg/d (r(2) = 0.9297), respectively. The effect of treatment on depletion rates of each analyte were significant (P < 0.05). Data also showed EB and TBA were delivered from CSP at least 200 d but were delivered from SP about 120 d. Multisite trials with beef-type steers (4 sites) and heifers (4 sites) evaluated feedlot performance and carcass characteristics in response to a CSP implant or when sham implanted (SC). A randomized complete block design with 9 blocks and 2 treatments was used per site within animal gender. Across sites, steers (n = 342, BW = 297 kg) were fed finishing rations for 190 to 202 d (mean 198 d) and heifers (n = 342, BW = 289 kg) were fed finishing rations for 191 to 201 d (mean 198 d). Cattle were harvested and carcasses evaluated. Data were pooled across sites within gender for statistical analysis. Steers and heifers treated with CSP yielded greater (P ≤ 0.003) ADG, DMI, and G:F than SC steers and heifers. Mean BW differences between CSP and SC continued to increase throughout the study, indicating CSP stimulated growth of steers and heifers for 198 d. Mean carcass weights of CSP steers (P = 0.005) and heifers (P = 0.004) were greater than those of SP steers and heifers by 26.2 and 20.6 kg, respectively. The LM area was larger (P < 0.001) in CSP steers and heifers than SC cattle. Marbling decreased with CSP treatment (P ≤ 0.031), which caused reductions (P ≤ 0.006) in proportions of carcasses grading Prime or Choice. Evidence from these studies showed that a single administration of CSP increased feedlot cattle performance for at least 198 d, compared with SC, and may reduce the need to reimplant cattle.
Effects of chilling rate and spray-chilling on weight loss and tenderness in beef strip loin steaks.
Prado, C S; de Felício, P E
2010-10-01
We evaluated the effects of chilling rate and the use of a spray-chilling system on the weight loss by evaporation on carcasses. We also evaluated the effects on meat purge in vacuum package, cooking losses, and on parameters related to the tenderness of strip loin steaks (M. longissimus lumborum). Forty non-castrated males of approximately 12 months old, finished in feed-lot were harvested in 16 Montana cattle (a composite breed), and 24 SimmentalxNellore crossbred cattle. After bleeding, the bodies were electrically stimulated and assigned to one of the four treatments: conventional air-chilling (CAC), conventional spray-chilling (CSC), slow air-chilling (SAC), and slow spray-chilling (SSC). Strip loin steaks (M. longissimus lumborum) of approximately 2.5 cm thick were removed, vacuum packed and aged for 7, 14, 30 or 60 days. Samples were analyzed for sarcomere length, myofibrillar fragmentation index, Warner-Bratzler shear force, and weight losses by purge and cooking. Spraying was efficient in reducing weight loss by evaporation (P<0.05). Effects of treatments and aging period on purge losses were observed, where samples from sprayed carcasses or aged cuts showed higher losses. Cooking losses were not affected either by spraying or aging. The slow chilling, with or without spraying, was more efficient in producing strip loin steaks with lower average shear force and longer sarcomere. The myofibrillar fragmentation index increased with aging time, but was not affected by carcasses spraying. Copyright (c) 2010 The American Meat Science Association. Published by Elsevier Ltd. All rights reserved.
Pittman, C I; Geornaras, I; Woerner, D R; Nightingale, K K; Sofos, J N; Goodridge, L; Belk, K E
2012-09-01
Lactic acid can reduce microbial contamination on beef carcass surfaces when used as a food safety intervention, but effectiveness when applied to the surface of chilled beef subprimal sections is not well documented. Studies characterizing bacterial reduction on subprimals after lactic acid treatment would be useful for validations of hazard analysis critical control point (HACCP) systems. The objective of this study was to validate initial use of lactic acid as a subprimal intervention during beef fabrication followed by a secondary application to vacuum-packaged product that was applied at industry operating parameters. Chilled beef subprimal sections (100 cm(2)) were either left uninoculated or were inoculated with 6 log CFU/cm(2) of a 5-strain mixture of Escherichia coli O157:H7, a 12-strain mixture of non-O157 Shiga toxin-producing E. coli (STEC), or a 5-strain mixture of nonpathogenic (biotype I) E. coli that are considered surrogates for E. coli O157:H7. Uninoculated and inoculated subprimal sections received only an initial or an initial and a second "rework" application of lactic acid in a custombuilt spray cabinet at 1 of 16 application parameters. After the initial spray, total inoculum counts were reduced from 6.0 log CFU/cm(2) to 3.6, 4.4, and 4.4 log CFU/cm(2) for the E. coli surrogates, E. coli O157:H7, and non-O157 STEC inoculation groups, respectively. After the second (rework) application, total inoculum counts were 2.6, 3.2, and 3.6 log CFU/cm(2) for the E. coli surrogates, E. coli O157:H7, and non-O157 STEC inoculation groups, respectively. Both the initial and secondary lactic acid treatments effectively reduced counts of pathogenic and nonpathogenic strains of E. coli and natural microflora on beef subprimals. These data will be useful to the meat industry as part of the HACCP validation process.
European conformation and fat scores have no relationship with eating quality.
Bonny, S P F; Pethick, D W; Legrand, I; Wierzbicki, J; Allen, P; Farmer, L J; Polkinghorne, R J; Hocquette, J-F; Gardner, G E
2016-06-01
European conformation and fat grades are a major factor determining carcass value throughout Europe. The relationships between these scores and sensory scores were investigated. A total of 3786 French, Polish and Irish consumers evaluated steaks, grilled to a medium doneness, according to protocols of the ���Meat Standards Australia��� system, from 18 muscles representing 455 local, commercial cattle from commercial abattoirs. A mixed linear effects model was used for the analysis. There was a negative relationship between juiciness and European conformation score. For the other sensory scores, a maximum of three muscles out of a possible 18 demonstrated negative effects of conformation score on sensory scores. There was a positive effect of European fat score on three individual muscles. However, this was accounted for by marbling score. Thus, while the European carcass classification system may indicate yield, it has no consistent relationship with sensory scores at a carcass level that is suitable for use in a commercial system. The industry should consider using an additional system related to eating quality to aid in the determination of the monetary value of carcasses, rewarding eating quality in addition to yield.
Ropodi, Athina I; Panagou, Efstathios Z; Nychas, George-John E
2018-01-01
In recent years, fraud detection has become a major priority for food authorities, as fraudulent practices can have various economic and safety consequences. This work explores ways of identifying frozen-then-thawed minced beef labeled as fresh in a rapid, large-scale and cost-effective way. For this reason, freshly-ground beef was purchased from seven separate shops at different times, divided in fifteen portions and placed in Petri dishes. Multi-spectral images and FTIR spectra of the first five were immediately acquired while the remaining were frozen (-20°C) and stored for 7 and 32days (5 samples for each time interval). Samples were thawed and subsequently subjected to similar data acquisition. In total, 105 multispectral images and FTIR spectra were collected which were further analyzed using partial least-squares discriminant analysis and support vector machines. Two meat batches (30 samples) were reserved for independent validation and the remaining five batches were divided in training and test set (75 samples). Results showed 100% overall correct classification for test and external validation MSI data, while FTIR data yielded 93.3 and 96.7% overall correct classification for FTIR test set and external validation set respectively. Copyright © 2017 Elsevier Ltd. All rights reserved.
Meat and Fish Freshness Inspection System Based on Odor Sensing
Hasan, Najam ul; Ejaz, Naveed; Ejaz, Waleed; Kim, Hyung Seok
2012-01-01
We propose a method for building a simple electronic nose based on commercially available sensors used to sniff in the market and identify spoiled/contaminated meat stocked for sale in butcher shops. Using a metal oxide semiconductor-based electronic nose, we measured the smell signature from two of the most common meat foods (beef and fish) stored at room temperature. Food samples were divided into two groups: fresh beef with decayed fish and fresh fish with decayed beef. The prime objective was to identify the decayed item using the developed electronic nose. Additionally, we tested the electronic nose using three pattern classification algorithms (artificial neural network, support vector machine and k-nearest neighbor), and compared them based on accuracy, sensitivity, and specificity. The results demonstrate that the k-nearest neighbor algorithm has the highest accuracy. PMID:23202222
Cloke, Jonathan; Matheny, Sharon; Swimley, Michelle; Tebbs, Robert; Burrell, Angelia; Flannery, Jonathan; Bastin, Benjamin; Bird, Patrick; Benzinger, M Joseph; Crowley, Erin; Agin, James; Goins, David; Salfinger, Yvonne; Brodsky, Michael; Fernandez, Maria Cristina
2016-11-01
The Applied Biosystems™ RapidFinder™ STEC Detection Workflow (Thermo Fisher Scientific) is a complete protocol for the rapid qualitative detection of Escherichia coli (E. coli) O157:H7 and the "Big 6" non-O157 Shiga-like toxin-producing E. coli (STEC) serotypes (defined as serogroups: O26, O45, O103, O111, O121, and O145). The RapidFinder STEC Detection Workflow makes use of either the automated preparation of PCR-ready DNA using the Applied Biosystems PrepSEQ™ Nucleic Acid Extraction Kit in conjunction with the Applied Biosystems MagMAX™ Express 96-well magnetic particle processor or the Applied Biosystems PrepSEQ Rapid Spin kit for manual preparation of PCR-ready DNA. Two separate assays comprise the RapidFinder STEC Detection Workflow, the Applied Biosystems RapidFinder STEC Screening Assay and the Applied Biosystems RapidFinder STEC Confirmation Assay. The RapidFinder STEC Screening Assay includes primers and probes to detect the presence of stx1 (Shiga toxin 1), stx2 (Shiga toxin 2), eae (intimin), and E. coli O157 gene targets. The RapidFinder STEC Confirmation Assay includes primers and probes for the "Big 6" non-O157 STEC and E. coli O157:H7. The use of these two assays in tandem allows a user to detect accurately the presence of the "Big 6" STECs and E. coli O157:H7. The performance of the RapidFinder STEC Detection Workflow was evaluated in a method comparison study, in inclusivity and exclusivity studies, and in a robustness evaluation. The assays were compared to the U.S. Department of Agriculture (USDA), Food Safety and Inspection Service (FSIS) Microbiology Laboratory Guidebook (MLG) 5.09: Detection, Isolation and Identification of Escherichia coli O157:H7 from Meat Products and Carcass and Environmental Sponges for raw ground beef (73% lean) and USDA/FSIS-MLG 5B.05: Detection, Isolation and Identification of Escherichia coli non-O157:H7 from Meat Products and Carcass and Environmental Sponges for raw beef trim. No statistically significant differences were observed between the reference method and the individual or combined kits forming the candidate assay using either of the DNA preparation kits (manual or automated extraction). For the inclusivity and exclusivity evaluation, the RapidFinder STEC Detection Workflow, comprising both RapidFinder STEC screening and confirmation kits, correctly identified all 50 target organism isolates and correctly excluded all 30 nontarget strains for both of the assays evaluated. The results of these studies demonstrate the sensitivity and selectivity of the RapidFinder STEC Detection Workflow for the detection of E. coli O157:H7 and the "Big 6" STEC serotypes in both raw ground beef and beef trim. The robustness testing demonstrated that minor variations in the method parameters did not impact the accuracy of the assay and highlighted the importance of following the correct incubation temperatures.
Keane, M P; McGee, M; O'Riordan, E G; Kelly, A K; Earley, B
2017-12-01
Accommodating cattle indoors during the winter is widely practiced throughout Europe. There is currently no legislation surrounding the space allowance and floor type that should be provided to cattle during this time, however, concerns have been raised regarding the type of housing systems currently in use. The objective of the study was to investigate the effect of space allowance and floor type on performance and welfare of finishing beef heifers. Continental crossbred heifers (n=240: mean initial live; weight, 504 (SD 35.8) kg) were blocked by breed, weight and age and randomly assigned to one of four treatments; (i) 3.0 m2, (ii) 4.5 m2 and (iii) 6.0 m2 space allowance per animal on a fully slatted concrete floor and (iv) 6.0 m2 space allowance per animal on a straw-bedded floor, for 105 days. Heifers were offered a total mixed ration ad libitum. Dry matter intake was recorded on a pen basis and refusals were weighed back twice weekly. Heifers were weighed, dirt scored and blood sampled every 3 weeks. Whole blood was analysed for complete cell counts and serum samples were assayed for metabolite concentrations. Behaviour was recorded continuously using IR cameras from days 70 to 87. Heifers' hooves were inspected for lesions at the start of the study and again after slaughter. Post-slaughter, carcass weight, conformation and fat scores and hide weight were recorded. Heifers housed at 4.5 m2 had a greater average daily live weight gain (ADG) than those on both of the other concrete slat treatments; however, space allowance had no effect on carcass weight. Heifers accommodated on straw had a greater ADG (0.15 kg) (P<0.05), hide weight (P<0.01) better feed conversion ratio (P<0.05) and had greater dirt scores (P<0.05) at slaughter than heifers accommodated on concrete slats at 6.0 m2. The number of heifers lying at any one time was greater (P<0.001) on straw than on concrete slats. Space allowance and floor type had no effect on the number of hoof lesions gained or on any of the haematological or metabolic variables measured. It was concluded that increasing space allowance above 3.0 m2/animal on concrete slats was of no benefit to animal performance but it did improve animal cleanliness. Housing heifers on straw instead of concrete slats improved ADG and increased lying time; however carcass weight was not affected.
Brown, A C; Powell, J G; Kegley, E B; Gadberry, M S; Reynolds, J L; Hughes, H D; Carroll, J A; Burdick Sanchez, N C; Thaxton, Y V; Backes, E A; Richeson, J T
2015-05-01
Beef bull calves (n = 62) were assigned randomly, within sire breed, to 1 of 4 treatments at birth. Treatments were 1) surgical castration near birth, 2) surgical castration near birth with oral administration of meloxicam (1 mg/kg BW), 3) surgical castration at weaning (WNG), or 4) surgical castration at weaning with oral administration of meloxicam (1 mg/kg BW; WMX). A subset of calves (n = 7/treatment group) were selected randomly near birth for blood collection, behavioral analyses, and rectal temperature (RT) records for a 7-d postcastration period on d 0 (birth), 1, 3, and 7, and on d 214 (weaning), 214 + 6 h, 215, 217, 221, and 228. Calf standing and lying activity were monitored from the same subsets by recording x- and y-axis positions of an accelerometer attached to the right metatarsus for 7 d postcastration. Calf BW was recorded throughout the entire production cycle, and carcass data were collected at slaughter. For statistical analyses, bulls left intact at birth were considered a positive control (BUL) for observations that occurred before their treatment application at weaning; likewise, bulls castrated at birth were considered a negative control (STR) during postweaning observations. No difference (P > 0.88) occurred in ADG between treatments throughout the preweaning period (d 0 to 214); however, 56-d postweaning ADG was greatest ( P= 0.02) in STR, intermediate in WMX, and least in WNG. At weaning, haptoglobin (Hp) was greater (P ≤ 0.005) for WNG and WMX compared to STR on d 214+6 h, 215, and 217, and Hp was greater (P = 0.05) in WNG compared to WMX on d 217. Neutrophils increased (P < 0.001) and red blood cells decreased (P ≤ 0.03) for WNG and WMX on d 214+6 h and 217, respectively. Postweaning behavior observations indicated that STR calves spent the least proportion of time standing (P = 0.002) when compared to WNG and WMX. Furthermore, WMX calves exhibited a greater proportion of time spent standing (P = 0.03) compared to WNG. Grazing and finishing phase ADG and carcass measurements did not differ (P ≥ 0.24) across treatments. In this study, surgical castration at weaning, but not near birth, altered the acute phase response, behavior, and growth performance. Oral meloxicam reduced serum Hp and improved ADG briefly when administered to calves castrated at weaning. Oral administration of meloxicam may be efficacious for mitigating some of the stress and inflammation associated with castration of weaning-age bull calves.
Smith, S B
2017-05-01
Because of the relatively short lifespans of beef cattle, membrane trafficking in relation to inflammation is not considered important unless it overtly affects productivity. However, glucose uptake and utilization is important for adipose tissue development in beef cattle, and increasing glucose utilization in intramuscular adipose tissue can increase carcass quality. Research from the 1980s demonstrated a lack of insulin sensitivity in isolated bovine adipocytes and adipose tissue explants incubated in vitro. Insulin did not stimulate glucose or acetate incorporation into fatty acids, nor did it increase concentrations of glycolytic intermediates in bovine adipose tissue incubated with exogenous glucose. Specific binding of [I] iodoinsulin and insulin degradation in bovine isolated adipocytes was low to non-detectable. These early studies indicated that insulin-dependent receptor-mediated signaling was less important in bovine adipose tissue than in adipose tissues of humans, swine, or laboratory species. More recent research demonstrated that glucose transporter protein 4 (GLUT4) expression in muscle and adipose tissue declines markedly after birth in calves, indicating the development of insulin resistance as cattle transition from suckling to functional ruminants. Insulin resistance is important in dairy cattle, causing ketosis and fatty liver. Consistent with this, subcutaneous adipose tissue expression decreases 50% following parturition in dairy cattle, although expression of genes associated with insulin responsiveness (, , and ) is up-regulated by 21 d postpartum. Understanding the underlying mechanisms of insulin resistance in beef and dairy cattle would increase animal health and thereby improve productivity.
Jordan, D; McEwen, S A
1998-05-01
A field trial using cattle from a commercial feedlot was conducted to quantify the effect of duration of fasting and a temporary change in ration on the concentration of Escherichia coli biotype 1 in feces. A nested hierarchical design with repeated measures through time was used. Two groups of 20 British x European breed beef steers having reached slaughter weight (mean live weight 685 kg; SD 50 kg) were fed entirely on a high-energy ration typical of that used in the Ontario beef finishing industry or were switched for 4 days onto a high-roughage ration. This was followed by a period of fasting and water deprivation to mimic that which occurs prior to slaughter. Fecal samples were collected at 0, 24, and 48 h of fasting, and for each sample the total presumptive E. coli (biotype 1) CFU/g of feces was enumerated by spiral plating. Estimates of effect for the design factors were obtained by restricted maximum likelihood, and these were compared to robust counterparts obtained from generalized estimating equations. Results indicated that the ration, the duration of fasting, and their interaction had significant effects on total log E. coli concentration in feces. Cattle on the high-roughage ration for four days had a significantly lower initial log E. coli CFU/g of feces compared to cattle on the normal ration, but after 48 h of fasting they had a significantly higher concentration. It is concluded that while a temporary change in ration and duration of fasting does affect E. coli concentration in feces, these changes do not seem large enough to deliver a drastic improvement in beef carcass hygiene should they be incorporated in hazard analysis and critical control point (HACCP) plans for the preslaughter period of beef production.
Gruber, S L; Tatum, J D; Scanga, J A; Chapman, P L; Smith, G C; Belk, K E
2006-12-01
Forty USDA Select and 40 upper two-thirds USDA Choice beef carcasses were used to determine the effects of postmortem aging on tenderness of 17 individual beef muscles. Biceps femoris-long head, complexus, gluteus medius, infraspinatus, longissimus dorsi, psoas major, rectus femoris, semimembranosus, semitendinosus, serratus ventralis, spinalis dorsi, supraspinatus, tensor fasciae latae, teres major, triceps brachii-long head, vastus lateralis, and vastus medialis muscles were removed from each carcass. Seven steaks (2.54-cm thick) were cut from every muscle, and each steak was assigned to one of the following postmortem aging periods: 2, 4, 6, 10, 14, 21, or 28 d postmortem. After completion of the designated aging period, steaks were removed from storage (2 degrees C, never frozen), cooked to a peak internal temperature of 71 degrees C, and evaluated using Warner-Bratzler shear force (WBSF). Analysis of WBSF revealed a 3-way interaction (P = 0.004) among individual muscle, USDA quality grade, and postmortem aging period. With the exception of the Select teres major, WBSF of all muscles (both quality grades) decreased with increasing time of postmortem storage. Nonlinear regression was used to characterize the extent (aging response) and rate of decrease in WBSF from 2 through 28 d postmortem for each muscle within each quality grade. In general, WBSF of upper two-thirds Choice muscles decreased more rapidly from 2 to 10 d postmortem than did corresponding Select muscles. Muscles that had greater aging responses generally had greater 2-d WBSF values. The upper two-thirds Choice psoas major, serratus ventralis, and vastus lateralis muscles required similar aging times to complete a majority of the aging response (< or =0.1 kg of aging response remaining) compared with analogous Select muscles. The upper two-thirds Choice complexus, gluteus medius, semitendinosus, triceps brachii-long head, and vastus medialis muscles required 4 to 6 d less time to complete a majority of the aging response than did comparable Select muscles. Aging times for Select biceps femoris-long head, infraspinatus, longissimus dorsi, rectus femoris, semimembranosus, spinalis dorsi, supraspinatus, and tensor fasciae latae muscles were > or =7 d longer than those for corresponding upper two-thirds Choice muscles. Results from this study suggest that muscle-to-muscle tenderness differences depend on quality grade and aging time and that postmortem aging should be managed with respect to individual muscle and USDA quality grade.
Kulow, M; Merkatoris, P; Anklam, K S; Rieman, J; Larson, C; Branine, M; Döpfer, D
2017-08-01
Bovine digital dermatitis (DD) is a contagious and multifactorial disease that leads to painful, ulcerative lesions of the skin near the heel-horn border of the foot, most commonly in dairy cattle. With regard to beef cattle, the pathogenesis and etiology of DD has not been widely reported or studied over the past several decades. A longitudinal field trial in a commercial feedlot was conducted to compare prevalence and effects of DD in beef steers provided a diet supplemented with a novel formulation of inorganic and organic trace mineral sources (OTM diet) compared to a diet provided with similar levels of trace minerals solely from inorganic sources (CON diet). A secondary objective was to evaluate the prevalence of DD and the potential effects on growth performance and carcass yield and quality. One thousand seventy-seven steers were assigned to 1 of the 2 treatment groups (CON diet or OTM diet) based on location of their home pens which were situated in 1 of 2 barns. All pens in the B barn (group B) were assigned to the OTM diet, and all pens in the A barn (group A) were assigned to the CON diet. The study was conducted in 2 phases: adaptation phase (AP) comprising the initial 60 d of feeding CON and OTM diets and postadaptation phase (PAP) which lasted until cattle were sent to harvest. In the AP, pens in group B had a greater proportion of steers (54.03%) with DD lesions compared to pens in group A (26.72%). During the PAP, the relative risk of observing an increased DD prevalence was significantly ( < 0.05) higher in CON group compared to OTM group. Growth performance, final live weight, and hot carcass weight were negatively impacted when steers were observed to have active DD lesions (M2 lesions) compared to steers with no M2 lesions over the study period. For ADG, a calculated loss per steer of 0.08 kg/d from type I (no M2 lesions) to type II (one M2 lesion; SE = 0.028; = 0.003) and loss of 0.14 kg/d from type I to type III (multiple M2 lesions; SE = 0.038; = 0.0003) were observed. A significant BW loss of approximately 10.06 kg (SE = 4.18; = 0.022) and a mean reduction of 5.5 kg per steer in HCW (SE = 2.74; = 0.043) were also found between type I and type II steers.
Genomic selection for the improvement of meat quality in beef.
Pimentel, E C G; König, S
2012-10-01
Selection index theory was used to compare different selection strategies aiming at the improvement of meat quality in beef cattle. Alternative strategies were compared with a reference scenario with three basic traits in the selection index: BW at 200 d (W200) and 400 d (W400) and muscling score (MUSC). These traits resemble the combination currently used in the German national beef genetic evaluation system. Traits in the breeding goal were defined as the 3 basic traits plus marbling score (MARB), to depict a situation where an established breeding program currently selecting for growth and carcass yield intends to incorporate meat quality in its selection program. Economic weights were either the same for all 4 traits, or doubled or tripled for MARB. Two additional selection criteria for improving MARB were considered: Live animal intramuscular fat content measured by ultrasound (UIMF) as an indicator trait and a genomic breeding value (GEBV) for the target trait directly (gMARB). Results were used to estimate the required number of genotyped animals in an own calibration set for implementing genomic selection focusing on meat quality. Adding UIMF to the basic index increased the overall genetic gain per generation by 15% when the economic weight on MARB was doubled and by 44% when it was tripled. When a genomic breeding value for marbling could be estimated with an accuracy of 0.5, adding gMARB to the index provided larger genetic gain than adding UIMF. Greatest genetic gain per generation was obtained with the scenario containing GEBV for 4 traits (gW200, gW400, gMUSC, and gMARB) when the accuracies of these GEBV were ≥0.7. Adding UIMF to the index substantially improved response to selection for MARB, which switched from negative to positive when the economic weight on MARB was doubled or tripled. For all scenarios that contained gMARB in the selection index, the response to selection in MARB was positive for all relative economic weights on MARB, when the accuracy of GEBV was >0.7. Results indicated that setting up a calibration set of ∼500 genotyped animals with carcass phenotypes for MARB could suffice to obtain a larger response to selection than measuring UIMF. If the size of the calibration set is ∼2,500, adding the ultrasound trait to an index containing already the GEBV would bring little benefit, unless the relative economic weight for marbling is much larger than for the other traits.
Prado, I N; Campo, M M; Muela, E; Valero, M V; Catalan, O; Olleta, J L; Sañudo, C
2014-09-01
The effects of castration age, dietary protein level and the dietary lysine/methionine (lys/met) ratio on animal performance, carcass characteristics and meat quality were studied in 64 intensively reared Friesian steers. Animals underwent castration procedures at 15 days old or at 5 months old. Dietary treatments started at 90 days old, with eight animals from each castration age randomly allocated to each treatment: 14.6% v. 16.8% CP (DM basis), and 3.0 v. 3.4 lys/met, on a 2×2×2 design. The recommended ratio of 3.0 was reached with supplementation of protected methionine. Steers were slaughtered at 443.5±26.2 kg live weight when they reached 12 months old approximately. Average daily gain, cold carcass weight or carcass classification were not affected by any studied effect. Muscle moisture (P=0.024), C18:2n-6 percentage (P=0.047), polyunsaturated fatty acid/saturated fatty acid (P=0.049) and n-6/n-3 (P=0.003) were higher in late castrated animals. Both high levels of dietary protein (P=0.008) and lys/met ratio (P=0.048) increased the percentage of muscle in the carcass. A level of 16.8% of CP in the diet also increased the percentage of monounsaturated fatty acids in the intramuscular fat (P=0.032), whereas a ratio lys/met of 3.4 decreased the percentage of saturated fatty acids (P=0.028). Thus, it is recommended using diets with a high protein level (16.8%) and a high lys/met ratio (3.4) in animals slaughtered at a young age, in order to obtain carcasses with high muscle content without negatively affecting productive traits or intramuscular fat composition.
Vahmani, P; Rolland, D C; McAllister, T A; Block, H C; Proctor, S D; Guan, L L; Prieto, N; López-Campos, Ó; Aalhus, J L; Dugan, M E R
2017-09-01
The objective of the present experiment was to determine if carcass quality and fatty acid profiles of longissimus thoracis (LT) and hamburger would be affected by feeding steers extruded flaxseed on its own followed by hay (non-TMR) compared to when hay and extruded flaxseed were fed together (TMR). Forty-eight steers in six pens were assigned to TMR or non-TMR for an average of 242days. Dry matter intake was lower for non-TMR versus TMR steers (10.56 vs. 11.42kg/d; P=0.02), but final live weight (610±0.50kg) and average daily gain (1.18±0.02kg/d) did not differ. Compared to TMR, feeding non-TMR enriched LT and hamburger with α-linolenic acid (ALA; 18:3n-3) by 14%, vaccenic acid (VA; t11-18:1) by 44%, rumenic acid (RA; c9,t11-18:2) by 40%, and conjugated linolenic acid (CLnA) by 58%. Overall, feeding extruded flaxseed separately from hay in a non-TMR was more effective at enhancing deposition of ALA, VA, RA and CLnA in beef. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.
Efficacy of hypobromous acid as a hide-on carcass antimicrobial intervention.
Schmidt, John W; Wang, Rong; Kalchayanand, Norasak; Wheeler, Tommy L; Koohmaraie, Mohammad
2012-05-01
Escherichia coli O157:H7 and Salmonella on cattle hides at slaughter are the main source of beef carcass contamination by these foodborne pathogens during processing. Hypobromous acid (HOBr) has been approved for various applications in meat processing, but the efficacy of HOBr as a hide antimicrobial has not been determined. In this study, the antimicrobial properties of HOBr were determined by spraying cattle hides at either of two concentrations, 220 or 500 ppm. Treatment of hides with 220 ppm of HOBr reduced the prevalence of E. coli O157:H7 on hides from 25.3 to 10.1% (P < 0.05) and reduced the prevalence of Salmonella from 28.3 to 7.1% (P < 0.05). Treatment of hides with 500 ppm of HOBr reduced (P < 0.05) the prevalence of E. coli O157:H7 on hides from 21.2 to 10.1% and the prevalence of Salmonella from 33.3 to 8.1%. The application of 220 ppm of HOBr reduced (P < 0.05) aerobic plate counts, total coliform counts, and E. coli counts on hides by 2.2 log CFU/ 100 cm(2). The use of 500 ppm of HOBr resulted in reductions (P < 0.05) of aerobic plate counts, total coliform counts, and E. coli counts by 3.3, 3.7, and 3.8 log CFU/100 cm(2), respectively, demonstrating that the use of higher concentrations of HOBr on hides resulted in additional antimicrobial activity. These results indicate that the adoption of a HOBr hide wash will reduce hide concentrations of spoilage bacteria and pathogen prevalence, resulting in a lower risk of carcass contamination.
Narvaez-Bravo, C; Miller, M F; Jackson, T; Jackson, S; Rodas-Gonzalez, A; Pond, K; Echeverry, A; Brashears, M M
2013-05-01
To determine the prevalence of Salmonella and Escherichia coli O157:H7 in cattle feedlots and the impact of subsequent contamination on carcasses in a Mexican Federal Inspection Type Standards harvest facility, 250 animals were tagged and sampled in each step of the slaughter process. Samples were taken from hides and fecal grabs, and composite samples were taken from three anatomical carcass sites (hindshank, foreshank, and inside round) during the slaughter process, at preevisceration (PE), prior to entering the hot box (PHB), and after 24 h of dry chilling (DC). Additionally, 250 fecal samples were collected from the feedlot (FL), holding pens (HP), and intestinal feces (IF), and water samples were taken from the HP area. E. coli O157:H7 and Salmonella detection were carried out with the BAX System, immunomagnetic separation, and conventional methods. Overall Salmonella prevalence was 52.5%. The highest prevalence (92.4%) was found on hides, followed by feces from the HP (91.0%), FL (55.56%), PE (49.0%), IF (46.8%), and PHB (24.8%), for all sampling periods combined. The lowest prevalence of 6.0% was found after DC. The overall prevalence of E. coli O157:H7 was as follows: 11.7% for hides, 5.2% for IF, 2.7% for FL, 2.0% for HP, 0.8% for PE, 0.4% for PHB, and 0.4% for the cooler. High prevalence of Salmonella in IF and on hides present a significant risk factor for contamination by Salmonella at the different processing steps. These results serve as a warning as to the risks of contamination in meats for these pathogens and the importance of following good manufacturing practices during beef production processes.
Brito Lopes, Fernando; da Silva, Marcelo Corrêa; Magnabosco, Cláudio Ulhôa; Goncalves Narciso, Marcelo; Sainz, Roberto Daniel
2016-01-01
This research evaluated a multivariate approach as an alternative tool for the purpose of selection regarding expected progeny differences (EPDs). Data were fitted using a multi-trait model and consisted of growth traits (birth weight and weights at 120, 210, 365 and 450 days of age) and carcass traits (longissimus muscle area (LMA), back-fat thickness (BF), and rump fat thickness (RF)), registered over 21 years in extensive breeding systems of Polled Nellore cattle in Brazil. Multivariate analyses were performed using standardized (zero mean and unit variance) EPDs. The k mean method revealed that the best fit of data occurred using three clusters (k = 3) (P < 0.001). Estimates of genetic correlation among growth and carcass traits and the estimates of heritability were moderate to high, suggesting that a correlated response approach is suitable for practical decision making. Estimates of correlation between selection indices and the multivariate index (LD1) were moderate to high, ranging from 0.48 to 0.97. This reveals that both types of indices give similar results and that the multivariate approach is reliable for the purpose of selection. The alternative tool seems very handy when economic weights are not available or in cases where more rapid identification of the best animals is desired. Interestingly, multivariate analysis allowed forecasting information based on the relationships among breeding values (EPDs). Also, it enabled fine discrimination, rapid data summarization after genetic evaluation, and permitted accounting for maternal ability and the genetic direct potential of the animals. In addition, we recommend the use of longissimus muscle area and subcutaneous fat thickness as selection criteria, to allow estimation of breeding values before the first mating season in order to accelerate the response to individual selection. PMID:26789008
Brito Lopes, Fernando; da Silva, Marcelo Corrêa; Magnabosco, Cláudio Ulhôa; Goncalves Narciso, Marcelo; Sainz, Roberto Daniel
2016-01-01
This research evaluated a multivariate approach as an alternative tool for the purpose of selection regarding expected progeny differences (EPDs). Data were fitted using a multi-trait model and consisted of growth traits (birth weight and weights at 120, 210, 365 and 450 days of age) and carcass traits (longissimus muscle area (LMA), back-fat thickness (BF), and rump fat thickness (RF)), registered over 21 years in extensive breeding systems of Polled Nellore cattle in Brazil. Multivariate analyses were performed using standardized (zero mean and unit variance) EPDs. The k mean method revealed that the best fit of data occurred using three clusters (k = 3) (P < 0.001). Estimates of genetic correlation among growth and carcass traits and the estimates of heritability were moderate to high, suggesting that a correlated response approach is suitable for practical decision making. Estimates of correlation between selection indices and the multivariate index (LD1) were moderate to high, ranging from 0.48 to 0.97. This reveals that both types of indices give similar results and that the multivariate approach is reliable for the purpose of selection. The alternative tool seems very handy when economic weights are not available or in cases where more rapid identification of the best animals is desired. Interestingly, multivariate analysis allowed forecasting information based on the relationships among breeding values (EPDs). Also, it enabled fine discrimination, rapid data summarization after genetic evaluation, and permitted accounting for maternal ability and the genetic direct potential of the animals. In addition, we recommend the use of longissimus muscle area and subcutaneous fat thickness as selection criteria, to allow estimation of breeding values before the first mating season in order to accelerate the response to individual selection.
Analysis of lard in meatball broth using Fourier transform infrared spectroscopy and chemometrics.
Kurniawati, Endah; Rohman, Abdul; Triyana, Kuwat
2014-01-01
Meatball is one of the favorite foods in Indonesia. For the economic reason (due to the price difference), the substitution of beef meat with pork can occur. In this study, FTIR spectroscopy in combination with chemometrics of partial least square (PLS) and principal component analysis (PCA) was used for analysis of pork fat (lard) in meatball broth. Lard in meatball broth was quantitatively determined at wavenumber region of 1018-1284 cm(-1). The coefficient of determination (R(2)) and root mean square error of calibration (RMSEC) values obtained were 0.9975 and 1.34% (v/v), respectively. Furthermore, the classification of lard and beef fat in meatball broth as well as in commercial samples was performed at wavenumber region of 1200-1000 cm(-1). The results showed that FTIR spectroscopy coupled with chemometrics can be used for quantitative analysis and classification of lard in meatball broth for Halal verification studies. The developed method is simple in operation, rapid and not involving extensive sample preparation. © 2013.
Evaluation of two-dimensional accelerometers to monitor behavior of beef calves after castration.
White, Brad J; Coetzee, Johann F; Renter, David G; Babcock, Abram H; Thomson, Daniel U; Andresen, Daniel
2008-08-01
To determine the accuracy of accelerometers for measuring behavior changes in calves and to determine differences in beef calf behavior from before to after castration. 3 healthy Holstein calves and 12 healthy beef calves. 2-dimensional accelerometers were placed on 3 calves, and data were logged simultaneous to video recording of animal behavior. Resulting data were used to generate and validate predictive models to classify posture (standing or lying) and type of activity (standing in place, walking, eating, getting up, lying awake, or lying sleeping). The algorithms developed were used to conduct a prospective trial to compare calf behavior in the first 24 hours after castration (n = 6) with behavior of noncastrated control calves (6) and with presurgical readings from the same castrated calves. On the basis of the analysis of the 2-dimensional accelerometer signal, posture was classified with a high degree of accuracy (98.3%) and the specific activity was estimated with a reasonably low misclassification rate (23.5%). Use of the system to compare behavior after castration revealed that castrated calves spent a significantly larger amount of time standing (82.2%), compared with presurgical readings (46.2%). 2-dimensional accelerometers provided accurate classification of posture and reasonable classification of activity. Applying the system in a castration trial illustrated the usefulness of accelerometers for measuring behavioral changes in individual calves.
Braz, C U; Camargo, G M F; Cardoso, D F; Gil, F M M; Fonseca, P D S; Cyrillo, J N S G; Mercadante, M E Z; Oliveira, H N; Tonhati, H
2015-12-28
The hormone ghrelin is produced in the stomach wall, has an orexigenic function, stimulates growth hormone secretion, and affects the energy balance of the animal. Therefore, the ghrelin gene (GHRL) is considered to be a good candidate marker for the identification of traits of great economic importance in cattle, such as those associated with feed intake, growth, and carcass quality. The use of molecular genetic markers associated with such traits permits the earlier and more accurate identification of superior animals, thus reducing the interval between generations, and increasing the genetic gain. Six SNPs were found in the GHRL gene, located in intron 3, intron 4, and exon 5. The positions of the SNPs on the gene and the substitutions were: g.2184A>G, g.2347T>C, g.4469T>C, g.4548A>G, g.4663T>C, and g.4729T>C (GenBank accession No. JX565585). After analysis of linkage disequilibrium, association tests were performed between four SNPs with the traits year weight for males, yearling weight for females, dry matter intake, loin eye area, and rump fat thickness (P ≤ 0.05). Therefore, GHRL is an important candidate gene that may be used to identify genetic variations that influence traits of economic importance in beef cattle.
NASA Astrophysics Data System (ADS)
Adhikary, Ramkrishna; Bose, Sayantan; Casey, Thomas A.; Gapsch, Al; Rasmussen, Mark A.; Petrich, Jacob W.
2010-02-01
Applications of fluorescence spectroscopy that enable the real-time or rapid detection of fecal contamination on beef carcasses and the presence of central nervous system tissue in meat products are discussed. The former is achieved by employing spectroscopic signatures of chlorophyll metabolites; the latter, by exploiting the characteristic structure and intensity of lipofuscin in central nervous system tissue. The success of these techniques has led us to investigate the possibility of diagnosing scrapie in sheep by obtaining fluorescence spectra of the retina. Crucial to this diagnosis is the ability to obtain baseline correlations of lipofuscin fluorescence with age. A murine model was employed as a proof of principle of this correlation.
Bird, Patrick; Flannery, Jonathan; Crowley, Erin; Agin, James; Goins, David; Jechorek, Robert
2014-01-01
The 3M™ Petriflm™ Salmonella Express (SALX) System is a simple, ready-to-use chromogenic culture medium system for the rapid qualitative detection and biochemical confirmation of Salmonella spp. in food and food process environmental samples. The 3M Petrifilm SALX System was compared using an unpaired study design in a multilaboratory collaborative study to the U.S. Department of Agriculture/Food Safety and Inspection Service (USDA/FSIS) Microbiology Laboratory Guidebook (MLG) 4.07 (2013) Isolation and Identification of Salmonella from Meat, Poultry, Pasteurized Egg and Catfish Products and Carcass and Environmental Sponges for raw ground beef and the U.S. Food and Drug Administration Bacteriological Analytical Manual (FDA/BAM) Chapter 5, Salmonella (2011) reference method for dry dog food following the current AOAC validation guidelines. For this study, a total of 17 laboratories located throughout the continental United States evaluated 1872 test portions. For the 3M Petrifilm SALX System, raw ground beef was analyzed using 25 g test portions, and dry dog food was analyzed using 375 g test portions. For the reference methods, 25 g test portions of each inatrix were analyzed. The two matrices were artificially contaminated with Salmonella at three inoculation levels: an uninoculated control level (0 CFU/test portion), a low inoculum level (0.2-2 CFU/test portion), and a high inoculum level (2-5 CFU/test portion). Each inoculation level was statistically analyzed using the probability of detection statistical model. For the raw ground beef and dry dog food test portions, no significant differences at the 95% confidence interval were observed in the number of positive samples detected by the 3M Petrifilm SALX System versus either the USDA/FSIS-MLG or FDA/BAM methods.
Wheeler, T L; Shackelford, S D; Koohmaraie, M
1998-11-01
The objective of this experiment was to compare the effects of belt grill and Open Hearth electric broiler cookery on palatability and cooking traits of longissimus steaks. The longissimus thoracis from carcasses of grain-fed steers or heifers was used. Duplicate measurements were made for Warner-Bratzler shear force at 3 and at 14 d after slaughter (n = 180) and trained sensory evaluation at 14 d after slaughter (n = 91) using both cooking methods. Belt grill-cooked samples had lower (P<.01) percentage of cooking losses (21.5 vs 25.8%) and higher (P<.01) shear force values (4.6 vs 4.3 kg) than electric broiler-cooked samples. Repeatability of duplicate measurements was higher for cooking losses (.58 vs .23) and shear force values (.85 vs .64) for belt grill than for electric broiler cooked samples. Belt grilled steaks had lower (P<.01) cooking losses (20.2 vs 29.8%); higher (P<.01) tenderness (7.0 vs 6.7) and juiciness (6.0 vs 5.1); and lower (P<.02) connective tissue amount (7.7 vs 7.8), beef flavor intensity (5.0 vs 5.1), and off-flavor (3.2 vs 3.3) ratings than steaks cooked with the electric broiler. Belt grill cooking increased the repeatability of duplicate sensory measurements for tenderness (.87 vs .71), connective tissue amount (.66 vs .30), and juiciness (.51 vs .08) ratings, and cooking losses (.63 vs .18) compared with cooking with the electric broiler. Belt grill cooking increased the precision for measurements of cooking, Warner-Bratzler shear force, and palatability traits of beef longissimus thoracis.
Reddy, Kondreddy Eswar; Jeong, JinYoung; Baek, Youl-Chang; Oh, Young Kyun; Kim, Minseok; So, Kyung Min; Kim, Min Ji; Kim, Dong Woon; Park, Sung Kwon; Lee, Hyun-Jeong
2017-01-01
Objective The main objective of this study was to determine the effect of different diets for early-weaned (EW) calves on rumen development, and how this affects fat deposition in the longissimus dorsi of adult Korean Hanwoo beef cattle. Methods Three EW groups were established (each n = 12) in which two- week-old Hanwoo calves were fed for ten weeks with milk replacer+concentrate (T1), milk replacer+concentrate+ roughage (T2), or milk replacer+concentrate+30% starch (T3); a control group (n = 12) was weaned as normal. At six months, 5 calves of each group were slaughtered and their organs were assessed and rumen papillae growth rates were measured. The remaining calves (n = 7 in each group) were raised to 20 months for further analysis. Results Twenty-month-old EW calves had a higher body weight (BW), backfat thickness (BF), longissimus dorsi muscle area (LMA) and intramuscular fat (IMF) than the control (p<0.05). Organ growth, rumen histology, and gene expression patterns in the 6-month-old calves were positively related to the development of marbling in the loin, as assessed by ultrasound analysis (p<0.05). In the group fed the starch-enriched diet (T3), higher BW, BF, LMA, and IMF were present. The IMF beef quality score of 20-month-old cattle was 1+ for the T2 and T3 diets and 1 for the T1 diet (p<0.05). Conclusion Papillae development was significantly greater in calves fed on high-concentrate diets and this may have resulted in the improved beef quality in the EW dietary groups compared to the control. PMID:28728406
Russell, J R; Lundy, E L; Minton, N O; Sexten, W J; Kerley, M S; Hansen, S L
2016-07-01
A 5-yr study was conducted using 985 crossbred steers (464 kg [SD 32]) fed in 6 separate, replicated groups to determine the influence of growing phase (GP) feed efficiency (FE) classification and diet type on finishing phase (FP) FE of steers. During the GP at the University of Missouri, steers were fed either a whole shell corn-based diet (G-Corn; 528 steers) or a roughage-based diet (G-Rough; 457 steers) using GrowSafe feed bunks to measure DMI for 69 to 89 d. At the end of the GP, steers were ranked by residual feed intake (RFI) within diet, shipped to Iowa State University, and blocked into FP pens (5 to 6 steers/pen) by GP diet and RFI rank (upper, middle, or lower one-third). Steers were transitioned to either FP cracked corn- or byproduct-based diets and fed until 1.27 cm backfat was reached. After completion of the sixth group, average GP G:F within GP diet was calculated for each FP pen (168 total pens) using GP initial BW as a covariate (G-Corn: 0.207 [SD 0.038]; G-Rough: 0.185 [SD 0.036]). Pens were classified as highly feed efficient (HFE; >0.5 SD from the G:F mean; 58 pens), mid feed efficient (MFE; ±0.5 SD from the G:F mean; 60 pens), or lowly feed efficient (LFE; <0.5 SD from the G:F mean; 50 pens). Data were analyzed using PROC MIXED of SAS. Experimental unit was FP pen and the model included the fixed effects of GP diet, FE classification, FP diet, and the interactions. Group (1 to 6) was included as a fixed effect. There were no 3-way interactions ( ≥ 0.2) for any measured traits. Finishing phase G:F was not affected by any interactions ( ≥ 0.5) but was greater ( ≤ 0.03) for HFE versus MFE and LFE and greater ( = 0.02) for MFE versus LFE. Growing phase diet × FE classification effects were detected ( ≤ 0.01) for FP final BW (FBW), ADG, and DMI. Among G-Rough steers, HFE and MFE had greater ( ≤ 0.04) FBW and ADG than LFE, but among G-Corn steers, LFE had heavier ( = 0.03) FBW than HFE whereas ADG was unaffected ( ≥ 0.2) by FE classification. Dry matter intake was unaffected ( ≥ 0.3) by FE classification among G-Rough steers, but among G-Corn steers, LFE had greater ( ≤ 0.003) DMI than MFE and HFE. Overall, differences in FP G:F between FE classifications were driven by different factors depending on diet; ADG differed among roughage-grown steers and DMI differed among corn-grown steers. Ultimately, steers classified as HFE during the GP still had superior FE during the FP.
Dairy cow handling facilities and the perception of Beef Quality Assurance on Colorado dairies.
Adams, A E; Olea-Popelka, F J; Grandin, T; Woerner, D R; Roman-Muniz, I N
2014-02-01
A survey was conducted on Colorado dairies to assess attitudes and practices regarding Dairy Beef Quality Assurance (DBQA). The objectives were to (1) assess the need for a new handling facility that would allow all injections to be administered via DBQA standards; (2) establish if Colorado dairy producers are concerned with DBQA; and (3) assess differences in responses between dairy owners and herdsmen. Of the 95 dairies contacted, 20 (21%) agreed to participate, with a median herd size of 1,178. When asked to rank the following 7 traits--efficiency, animal safety, human safety, ease of animal handling, ease of operation, inject per Beef Quality Assurance (BQA) procedures, and cost--in order of priority when designing a new handling facility, human and animal safety were ranked highest in priority (first or second) by the majority of participants, with ease of animal handling and efficiency ranked next. Interestingly, the administration of injections per BQA standards was ranked sixth or seventh by most participants. Respondents estimated the average annual income from the sale of cull cows to be 4.6% of all dairy income, with 50% receiving at least one carcass discount or condemnation in the past 12 mo. Although almost all of the participating dairy farmers stated that the preferred injection site for medications was the neck region, a significant number admitted to using alternate injection sites. In contrast, no difference was found between responses regarding the preferred and actual location for intravenous injections. Although most participating producers are aware of BQA injection guidelines, they perceive efficiency as more important, which could result in injections being administered in locations not promoted by BQA. Dairy owners and herdsmen disagreed in whether or not workers had been injured in the animal handling area in the last 12 mo. Handling facilities that allow for an efficient and safe way to administer drugs according to BQA guidelines and educational opportunities that highlight the effect of improved DBQA on profitability could prove useful. Dairy producers play a key role in ensuring that dairy beef is safe and high quality, and just as they are committed to producing safe and nutritious milk for their customers, they should be committed to producing the best quality beef. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
Hegarty, R S; Miller, J; Oelbrandt, N; Li, L; Luijben, J P M; Robinson, D L; Nolan, J V; Perdok, H B
2016-12-01
Nitrate supplementation has been shown to be effective in reducing enteric methane emission from ruminants, but there have been few large-scale studies assessing the effects of level of nitrate supplementation on feed intake, animal growth, or carcass and meat quality attributes of beef cattle. A feedlot study was conducted to assess the effects of supplementing 0.25 or 0.45% NPN in dietary DM as either urea (Ur) or calcium nitrate (CaN) on DMI, ADG, G:F, and carcass attributes of feedlot steers ( = 383). The levels of NPN inclusion were selected as those at which nitrate has previously achieved measurable mitigation of enteric methane. The higher level of NPN inclusion reduced ADG as did replacement of Ur with CaN ( < 0.01). A combined analysis of DMI for 139 steers with individual animal intake data and pen-average intakes for 244 bunk-fed steers showed a significant interaction between NPN source and level ( = 0.02) with steers on the high-CaN diet eating less than those on the other 3 diets ( < 0.001). Neither level nor NPN source significantly affected cattle G:F. There was a tendency ( = 0.05) for nitrate-supplemented cattle to have a slower rate of eating (g DMI/min) than Ur-supplemented cattle. When adjusted for BW, neither NPN source nor inclusion level affected cross-sectional area of the LM or fatness measured on the live animal. Similarly, there were no significant main effects of treatments on dressing percentage or fat depth or muscling attributes of the carcass after adjustment for HCW ( > 0.05). Analysis of composited meat samples showed no detectable nitrates or nitrosamines in raw or cooked meat, and the level of nitrate detected in meat from nitrate-supplemented cattle was no higher than for Ur-fed cattle ( > 0.05). We conclude that increasing NPN inclusion from 0.25 to 0.45% NPN in dietary DM and replacing Ur with CaN decreased ADG in feedlot cattle without improving G:F.
Chen, L; Mao, F; Crews, D H; Vinsky, M; Li, C
2014-03-01
Feeding behavior traits including daily feeding duration (FD), daily feeding head down time (HD), average feeding duration per feeding event (FD_AVE), average feeding head down time per feeding event (HD_AVE), feeding frequency (FF), and meal eating rate (ER) were analyzed to estimate their phenotypic and genetic correlations with feed intake, growth performance, residual feed intake (RFI), ultrasound, and carcass merit traits in Angus and Charolais finishing steers. Heritability estimates for FD, HD, FD_AVE, HD_AVE, FF, and ER were 0.27 ± 0.09 (SE), 0.25 ± 0.09, 0.19 ± 0.06, 0.11 ± 0.05, 0.24 ± 0.08, and 0.38 ± 0.10, respectively, in the Angus population and 0.49 ± 0.12, 0.38 ± 0.11, 0.31 ± 0.09, 0.29 ± 0.10, 0.43 ± 0.11, and 0.56 ± 0.13, respectively, in the Charolais population. In both the Angus and Charolais steer populations, FD and HD had relatively stronger phenotypic (0.17 ± 0.06 to 0.32 ± 0.04) and genetic (0.29 ± 0.17 to 0.54 ± 0.18) correlations with RFI in comparison to other feeding behavior traits investigated, suggesting the potential of FD and HD as indicators in assessing variation of RFI. In general, feeding behavior traits had weak phenotypic correlations with most of the ultrasound and carcass merit traits; however, estimated genetic correlations of the feeding behavior traits with some fat deposition related traits were moderate to moderately strong but differed in magnitude or sign between the Angus and Charolais steer populations, likely reflecting their different biological types. Genetic parameter estimation studies involving feeding behavior traits in beef cattle are lacking and more research is needed to better characterize the relationships between feeding behavior and feed intake, growth, feed utilization, and carcass merit traits, in particular with respect to different biological types of cattle.
A field investigation of the economic impact of respiratory disease in feedlot calves
Jim, G. Kee; Booker, Calvin W.; Ribble, Carl S.; Guichon, P. Timothy; Thorlakson, Ben E.
1993-01-01
A trial involving 512 beef calves was conducted in a commercial research feedlot to determine the effect of bovine respiratory disease (BRD) on performance parameters and carcass characteristics. Two hundred and fifty-six calves that were deemed to be “sick” (S) from BRD were allocated to 16 pens and 256 calves that were considered to be “well” (W) were allocated to another 16 pens. The outcome variables that were measured included average daily gain (ADG), daily dry matter intake (DDMI), dry matter intake to gain ratio (DM:G), BRD treatment rate, death loss, carcass traits, and net profit per pen. The data were partitioned into several time intervals including processing (P) to day −1, day 0 to day 27, day 28 to day 55, day 56 to day 83, day 84 to day 111, day 112 to day 139, day 140 to slaughter, day 0 to slaughter (0-Slaugh), and processing to slaughter (P-Slaugh). However, the most important interval was from processing to slaughter. For the interval P-Slaugh, there were no significant (p≥0.05) differences between the S and W groups with respect to ADG and DM:G. Also, for the interval 0-Slaugh, the DDMI was similar for both groups. There were no significant (p≥0.05) differences between the S and W groups for carcass weight, average fat, grade fat, rib eye area, marbling score, cutability estimate, or carcass grade distribution. The BRD treatment rates in the S and W groups were 6.6% and 4.7%, respectively. The mortality rates in the S and W groups were 0.78% and 0.39%, respectively. Also, there were no deaths attributable to BRD in either group. In the economic model, there was no significant (p≥0.05) difference between the S and W groups with respect to net profit per pen. We conclude that this trial did not validate the concept that BRD impacts performance parameters, because a sufficient disease challenge was not present. However, this study provides several observations that will enhance the experimental design of future studies that attempt to quantify the total economic impact of BRD. PMID:17424321
Bolormaa, S; Pryce, J E; Kemper, K; Savin, K; Hayes, B J; Barendse, W; Zhang, Y; Reich, C M; Mason, B A; Bunch, R J; Harrison, B E; Reverter, A; Herd, R M; Tier, B; Graser, H-U; Goddard, M E
2013-07-01
The aim of this study was to assess the accuracy of genomic predictions for 19 traits including feed efficiency, growth, and carcass and meat quality traits in beef cattle. The 10,181 cattle in our study had real or imputed genotypes for 729,068 SNP although not all cattle were measured for all traits. Animals included Bos taurus, Brahman, composite, and crossbred animals. Genomic EBV (GEBV) were calculated using 2 methods of genomic prediction [BayesR and genomic BLUP (GBLUP)] either using a common training dataset for all breeds or using a training dataset comprising only animals of the same breed. Accuracies of GEBV were assessed using 5-fold cross-validation. The accuracy of genomic prediction varied by trait and by method. Traits with a large number of recorded and genotyped animals and with high heritability gave the greatest accuracy of GEBV. Using GBLUP, the average accuracy was 0.27 across traits and breeds, but the accuracies between breeds and between traits varied widely. When the training population was restricted to animals from the same breed as the validation population, GBLUP accuracies declined by an average of 0.04. The greatest decline in accuracy was found for the 4 composite breeds. The BayesR accuracies were greater by an average of 0.03 than GBLUP accuracies, particularly for traits with known genes of moderate to large effect mutations segregating. The accuracies of 0.43 to 0.48 for IGF-I traits were among the greatest in the study. Although accuracies are low compared with those observed in dairy cattle, genomic selection would still be beneficial for traits that are hard to improve by conventional selection, such as tenderness and residual feed intake. BayesR identified many of the same quantitative trait loci as a genomewide association study but appeared to map them more precisely. All traits appear to be highly polygenic with thousands of SNP independently associated with each trait.
Weber, K L; Drake, D J; Taylor, J F; Garrick, D J; Kuehn, L A; Thallman, R M; Schnabel, R D; Snelling, W M; Pollak, E J; Van Eenennaam, A L
2012-12-01
Several organizations have developed prediction models for molecular breeding values (MBV) for quantitative growth and carcass traits in beef cattle using Bovine SNP50 genotypes and phenotypic or EBV data. Molecular breeding values for Angus cattle have been developed by IGENITY, Pfizer Animal Genetics, and a collaboration between researchers from Iowa State University and the University of Missouri-Columbia (ISU/UMC). The U.S. Meat Animal Research Center (USMARC; Clay Center, NE) has also developed MBV for 16 cattle breeds using 2 multibreed populations, the Germplasm Evaluation (GPE) Program and the 2,000 Bull Project (2K(ALL)), and 2 single breed subpopulations of the 2,000 Bull Project, Angus (2K(AN)) and Hereford (2K(HH)). In this study, these MBV were assessed relative to commercial ranch EBV estimated from the progeny phenotypes of Angus bulls naturally mated in multisire breeding pastures to commercial cows: 121 for USMARC MBV, 99 for ISU/UMC MBV, and 29 for IGENITY and Pfizer MBV (selected based on number of progeny carcass records). Five traits were analyzed: weaning weight (WW), HCW, marbling score (MS), rib-eye muscle area (RE), and, for IGENITY and Pfizer only, feedlot ADG. The average accuracies of MBV across traits were 0.38 ± 0.05 for IGENITY, 0.61 ± 0.12 for Pfizer, 0.46 ± 0.12 for ISU/UMC, 0.16 ± 0.04 for GPE, 0.26 ± 0.05 for 2K(ALL), 0.24 ± 0.04 for 2K(AN), and 0.02 ± 0.12 for 2K(HH). Angus-based MBV (IGENITY, Pfizer, ISU/UMC, and 2K(AN)) explained larger proportions of genetic variance in this population than GPE, 2K(ALL), or 2K(HH) MBV for the same traits. In this data set, IGENITY, Pfizer, and ISU/UMC MBV were predictive of realized performance of progeny, and incorporation of that information into national genetic evaluations would be expected to improve EPD accuracy, particularly for young animals.
Shackelford, S D; Wheeler, T L; Koohmaraie, M
2004-01-01
The present experiments were conducted to determine whether improved beef longissimus shear force methodology could be used to assess pork longissimus tenderness. Specifically, three experiments were conducted to: 1) determine the effect of belt grill (BG) cookery on repeatability of pork longissimus Warner-Bratzler shear force (WBSF), 2) compare the correlation of WBSF and slice shear force (SSF) with trained sensory panel tenderness ratings, and 3) estimate the repeatability of pork longissimus SSF for chops cooked with a BG. In Exp. 1 and 2, the longissimus was removed from the left side of each carcass (Exp. 1, n = 25; Exp. 2, n = 23) at 1 d postmortem and immediately frozen to maximize variation in tenderness. In Exp. 1, chops were cooked with either open-hearth electric broilers (OH) or BG, and WBSF was measured. Percentage of cooking loss was lower (P < 0.001) and less variable for chops cooked with a BG (23.2%; SD = 1.7%) vs. OH (27.6%; SD = 3.0%). Estimates of the repeatability of WBSF were similar for chops cooked with OH (0.61) and BG (0.59). Although significant (P < 0.05), differences in WBSF (4.1 vs. 3.9 kg) between cooking methods accounted for less than 5% of the total variation in WBSF. In Exp. 2, the correlation of SSF (r = -0.72; P < 0.001) with trained sensory panel tenderness ratings was slightly stronger than the correlation of WBSF (r = -0.66; P < 0.001) with trained sensory panel tenderness ratings, indicating that the two methods had a similar ability to predict tenderness ratings. In Exp. 3, duplicate samples from 372 carcasses at 2 and 10 d postmortem were obtained, cooked with BG, and SSF was determined. The repeatability of SSF was 0.90, which is comparable to repeatability estimates for beef and lamb. Use of BG cookery and SSF could facilitate the collection of accurate pork longissimus tenderness data. Time and labor savings associated with BG cookery and the SSF technique should help to decrease research costs.
Bennett, G L; Shackelford, S D; Wheeler, T L; King, D A; Casas, E; Smith, T P L
2013-02-01
Genetic markers in casein (CSN1S1) and thyroglobulin (TG) genes have previously been associated with fat distribution in cattle. Determining the nature of these genetic associations (additive, recessive, or dominant) has been difficult, because both markers have small minor allele frequencies in most beef cattle populations. This results in few animals homozygous for the minor alleles. selection to increase the frequencies of the minor alleles for 2 SNP markers in these genes was undertaken in a composite population. The objective was to obtain better estimates of genetic effects associated with these markers and determine if there were epistatic interactions. Selection increased the frequencies of minor alleles for both SNP from <0.30 to 0.45. Bulls (n = 24) heterozygous for both SNP were used in 3 yr to produce 204 steer progeny harvested at an average age of 474 d. The combined effect of the 9 CSN1S1 × TG genotypes was associated with carcass-adjusted fat thickness (P < 0.06) and meat tenderness predicted at the abattoir by visible and near-infrared reflectance spectroscopy (P < 0.04). Genotype did not affect BW from birth through harvest, ribeye area, marbling score, slice shear force, or image-based yield grade (P > 0.10). Additive, dominance, and epistatic SNP association effects were estimated from genotypic effects for adjusted fat thickness and predicted meat tenderness. Adjusted fat thickness showed a dominance association with TG SNP (P < 0.06) and an epistatic additive CSN1S1 × additive TG association (P < 0.03). For predicted meat tenderness, heterozygous TG meat was more tender than meat from either homozygote (P < 0.002). Dominance and epistatic associations can result in different SNP allele substitution effects in populations where SNP have the same linkage disequilibrium with causal mutations but have different frequencies. Although the complex associations estimated in this study would contribute little to within-population selection response, they could be important for marker-assisted management or reciprocal selection schemes.
Carvalho, J R R; Brennan, K M; Ladeira, M M; Schoonmaker, J P
2018-05-25
Heterotrophic production of microalgae biomass provides a consistent, high quality source of docosahexaenoic acid (DHA; C22:6 n-3) in triglyceride oils that could be used as a ration supplement for feedlot steers to improve nutritional qualities of beef. Sixty Angus × Simmental steers (438 ± 6.4 kg) were allotted to 2 treatments (30 steers each, 6 pens, 5 steers/pen) to determine the effects of ForPLUS (DHA-rich microalgae Aurantiochytrium limacinum; 63.6 % fat; 17.9% DHA; 30 mg/kg Sel-Plex; Alltech Inc.) on performance, insulin sensitivity, LM fatty acid composition, and meat quality. Steers were fed basal diets containing 45% corn, 30% distillers dried grains with solubles, 20% corn silage, and 5% supplement. Basal diets were formulated to contain 16.1% CP and 1.32 Mcal/kg NEg. Treatments were delivered to steers in a ground corn based top-dress (454 g total/steer) and contained no microalgae for control steers or 100 g/steer daily of ForPLUS for microalgae steers. A glucose tolerance test (GTT) was performed 10 d prior to slaughter. Steers were slaughtered when a target pen BW of 621 kg was achieved. Fatty acid oxidation potential was determined by measuring thiobarbituric acid reactive substances (TBARS) on LM samples collected 24 h after slaughter and aged for 48 h or 21 d. Weight and BW gain did not differ during the study (P ≥ 0.13); however, steers fed microalgae remained in the feedlot 7 more d compared to steers fed the control diet (111 vs. 104 d; P = 0.04). Overall DMI decreased (P = 0.002) and G:F increased during the second half of the study (P = 0.04) in steers fed microalgae compared to steers fed the control diet. Steers fed microalgae secreted less insulin (P = 0.01) and took longer to clear glucose (P = 0.01) during a 2 h GTT. Carcass traits did not differ between treatments (P ≥ 0.23). Microalgae had no effect on n-6 content (P = 0.67), but more than doubled the n-3 fatty acid percentage and the n3:n6 ratio of the LM (P < 0.0001). The percentage of n-3 fatty acids C20:5 and C22:6 were increased (P < 0.0001) 4-fold and 6.25-fold, respectively, by microalgae supplementation. Concentration of TBARS did not differ in LM aged for 48 h (P = 0.91); however, when aged for 21 d, steers fed microalgae tended to produce LM with greater TBARS concentration compared to steers fed the control diet (P = 0.08). In conclusion, DHA-rich microalgae decreased DMI of steers, and increased n-3 fatty acids and beef oxidation in steaks aged for 21 d.
Murphy, B; Crosson, P; Kelly, A K; Prendiville, R
2018-02-06
Modifying finishing strategies within established production systems has the potential to increase beef output and farm profit while reducing greenhouse gas (GHG) emissions. Thus, the objectives of this study were to investigate the effects of finishing duration on animal performance of Holstein-Friesian (HF) bulls and steers and evaluate the profitability and GHG emissions of these finishing strategies. A total of 90 HF calves were assigned to a complete randomised block design; three bull and three steer finishing strategies. Calves were rotationally grazed in a paddock system for the first season at pasture, housed and offered grass silage ad libitum plus 1.5 kg DM of concentrate per head daily for the first winter and returned to pasture for a second season. Bulls were slaughtered at 19 months of age and either finished indoors on concentrates ad libitum for 100 days (19AL), finished at pasture supplemented with 5 kg DM of concentrate per head daily for 100 (19SP) or 150 days (19LP). Steers were slaughtered at 21 months of age and finished at pasture, supplemented with 5 kg DM of concentrate per head daily for 60 (21SP) and 110 days (21LP) or slaughtered at 24 months of age and finished indoors over the second winter on grass silage ad libitum plus 5 kg DM of concentrate per head daily (24MO). The Grange Dairy Beef Systems Model and the Beef Systems Greenhouse Gas Emissions Model were used to evaluate profitability and GHG emissions, respectively. Average daily gain during the finishing period (P<0.001), live weight at slaughter (P<0.01), carcass weight (P<0.05) and fat score (P<0.001) were greater for 19AL than 19SP and 19LP, respectively. Similarly, concentrate dry matter intake was greater for 19AL than 19SP; 19LP was intermediate (P<0.001). Live weight at slaughter (P<0.001), carcass weight (P<0.001), conformation score (P<0.05) and fat score (P<0.001) were greater for 24MO than 21SP and 21LP, respectively. During the finishing period concentrate dry matter intake was greater for 21LP than 21SP with 24MO intermediate; 542, 283 and 436 kg DM, respectively. Although pasture-based finishing strategies had lower gross output values, concentrate feed costs were also reduced thus net margin was greater than indoor finishing strategies. Reducing concentrate input increased GHG emissions for bulls and steers slaughtered at the same age, respectively. Although prolonging the finishing duration reduced GHG emissions for bull and steer production systems, finishing bulls and steers over a longer period at pasture did not enhance animal performance and profit.
Kim, Hyun Young; Seo, Jiyoung; Kim, Tae-Hun; Shim, Bomi; Cha, Seok Mun; Yu, Seungho
2017-06-01
This study examined the use of microbial community structure as a bio-indicator of decomposition levels. High-throughput pyrosequencing technology was used to assess the shift in microbial community of leachate from animal carcass lysimeter. The leachate samples were collected monthly for one year and a total of 164,639 pyrosequencing reads were obtained and used in the taxonomic classification and operational taxonomy units (OTUs) distribution analysis based on sequence similarity. Our results show considerable changes in the phylum-level bacterial composition, suggesting that the microbial community is a sensitive parameter affected by the burial environment. The phylum classification results showed that Proteobacteria (Pseudomonas) were the most influential taxa in earlier decomposition stage whereas Firmicutes (Clostridium, Sporanaerobacter, and Peptostreptococcus) were dominant in later stage under anaerobic conditions. The result of this study can provide useful information on a time series of leachate profiles of microbial community structures and suggest patterns of microbial diversity in livestock burial sites. In addition, this result can be applicable to predict the decomposition stages under clay loam based soil conditions of animal livestock. Copyright © 2017 Elsevier B.V. All rights reserved.
The effect of branding on consumer palatability ratings of beef strip loin steaks.
Wilfong, A K; McKillip, K V; Gonzalez, J M; Houser, T A; Unruh, J A; Boyle, E A E; O'Quinn, T G
2016-11-01
The objective of this study was to determine the influence of knowing the brand or USDA grade on consumer palatability ratings of beef strip loin steaks. Strip loins were selected to represent 5 USDA grades and brands, USDA Select, Choice, Prime, Certified Angus Beef (CAB; upper 2/3 Choice), and Select, from carcasses of cattle classified as Angus on the basis of phenotype. After 21 d of aging, 2.5-cm-thick steaks were cut, consecutively cut steaks were paired for consumer evaluation. Consumer panelists ( = 112) evaluated samples for tenderness, juiciness, flavor liking, and overall liking. Additionally, consumers rated each palatability trait as either acceptable or unacceptable. Samples were fed in 2 rounds on the same day: blind and informed testing. In the first round, blind testing, consumers were served 1 sample from each treatment, with no product information provided. In the second round, consumers were informed of the brand or quality grade prior to sampling. During blind testing, CAB rated similar ( > 0.05) to Choice for all palatability traits; however, CAB rated greater ( < 0.05) than Choice for all traits during informed testing. Additionally, Angus Select and Select were rated similar > 0.05) for all traits when tested blind, but Angus Select was rated greater ( < 0.05) than Select for flavor and overall liking when brand was declared. When comparing blind and informed ratings, Angus Select and CAB had greater ( < 0.05) ratings for juiciness, flavor liking, and overall liking, and Prime had increased ( < 0.05) ratings for flavor liking and overall liking because of brand disclosure. However, ratings for Choice and Select samples were unaffected ( > 0.05) when brand was disclosed. Brand knowledge increased ( < 0.05) the percentage of Prime samples rated as acceptable for flavor and the percentage of Angus Select samples rated as acceptable for flavor and overall liking. Conversely, there was no difference ( > 0.05) in the percentage of Choice and Select samples rated as acceptable for all palatability traits. These data indicate that Prime, CAB, and Angus Select steaks receive an increase in consumer palatability perception, or "brand lift," which does not occur for Choice and Select beef.
Tait, Richard G; Cushman, Robert A; McNeel, Anthony K; Casas, Eduardo; Smith, Timothy P L; Freetly, Harvey C; Bennett, Gary L
2018-06-01
Genetic marker effects and type of inheritance are estimated with poor precision when minor marker allele frequencies are low. An Angus population was subjected to marker assisted selection for multiple years to equalize CAPN1 haplotypes, CAST, and GHR genetic marker frequencies. The objective was to estimate the pleiotropic effects of these carcass quality oriented markers for body weight, reproduction, and first calf performance traits in 174 replacement beef females which were managed under 2 post-weaning development protocols. Heifers were weighed at 11-, 12-, and 13-mo, at first breeding season pregnancy evaluation, and prior to first calving season. Pubertal status was determined at 11-, 12-, and 13-mo of age. Antral follicles were counted, reproductive tracts were scored, and tract dimensions were measured at 13-mo. Body condition and hip height were scored and measured at pregnancy evaluation and prior to calving season. Heifer pregnancy and weaning rates and ordinal birth date were recorded. Calf body weights at birth and weaning were analyzed. Single df linear contrasts for recessive effects of the GHR heterozygous genotype showed significant decreases of 2.5-3.6% in 11-, 12-, and 13-mo heifer body weights and heifer weight prior to calving. The additive differences between GHR homozygotes were small and not significant for all body weights measured but a 1 wk difference in calf birth date was significant. For all 13-mo uterine measurements, scores, and antral follicle counts, only the CAST dominance contrast for medium antral follicle count was significant. The CAPN1 haplotype with a strong additive effect for increased beef tenderness also had a significant additive effect on calving date. Heifers homozygous for the tender haplotype calved 7.9 days later than heifers homozygous for the tough haplotype. Most heifer reproductive traits were not significantly affected by CAST and CAPN1 markers that are widely used to improve beef tenderness by selection and breeders should not be concerned with how these markers affect reproduction and other heifer traits with the possible exception of CAPN1 effects on calving date. Published by Elsevier Inc.
Cruz-Monterrosa, Rosy G; Reséndiz-Cruz, Verónica; Rayas-Amor, Armando A; López, Marcos; la Lama, Genaro C Miranda-de
2017-01-01
In emergent economies and developing countries of Africa, Asia and Latin America, the major cause for carcass rejection from the international market is bruising; nevertheless, many of these carcases are destined to local markets and meat processing industries for human consumption. Therefore, the aim of the present study was to assess the effect of bruised meat on pH, microbiologic count and biogenic amine (BA) profiles along 21 days of ageing (sampling 1st, 7th, 14th and 21st day) with two packaging method (plastic bag vs vacuum) at 4 °C. A total of 50 bruised carcasses were sampled from 1000 young bulls (Brown Swiss X Zebu) of 18-24 months old and an average live weight of 450 ± 66 kg. The results showed significant differences between packaging systems and bruised vs non-bruised meat. The bruised meat caused higher biogenic amine concentrations than did non-bruised meat. We conclude that bruised meat favoured increments of biogenic amine concentrations, even more than did non-bruised meat. The plastic bag + vacuum system limited the increments of BA concentration during storage time therefore it improved shelf life of meat. These results emphasized the importance of implementing best management practices during pre-slaughter operations of cattle in order to reduce a possible risk factor for bruised meat.
Hwang, J. A.; Islam, M. M.; Ahmed, S. T.; Mun, H. S.; Kim, G. M.; Kim, Y. J.; Yang, C. J.
2014-01-01
The study was designed to evaluate the effect of 2% seamustard (Undaria pinnatifida) by-product (SW) on growth performance, immunity, carcass characteristics, cholesterol content and fatty acid profile in Hanwoo steers. A total of 20 Hanwoo steers (ave. 22 months old; 619 kg body weight) were randomly assigned to control (basal diet) and 2% SW supplemented diet. Dietary SW supplementation significantly (p<0.05) improved average daily gain and gain:feed ratio as well as serum immunoglobulin G concentration. Chemical composition and quality grade of meat and carcass yield grades evaluated at the end of the trial were found to be unaffected by SW supplementation. Dietary SW significantly reduced meat cholesterol concentration (p<0.05). Dietary SW supplementation significantly reduced the myristic acid (C14:0) and palmitoleic acid (C16:ln-7) concentration, while SW increased the concentration of stearic acid (C18:0) and linolenic acid (C18:3n-3) compared to control (p<0.05). Dietary SW supplementation had no effect on saturated fatty acids (SFA), unsaturated fatty acids, poly unsaturated fatty acid (PUFA) or mono unsaturated fatty acid content in muscles. A reduced ratio of PUFA/SFA and n-6/n-3 were found in SW supplemented group (p<0.05). In conclusion, 2% SW supplementation was found to improve growth, immunity and fatty acid profile with significantly reduced cholesterol of beef. PMID:25083105
Contamination of meat with Campylobacter jejuni in Saitama, Japan.
Ono, K; Yamamoto, K
1999-03-15
To determine the source of food contamination with Campylobacter jejuni, we investigated retail meat, a chicken processing plant and a broiler farm. C. jejuni was found in domestic retailed poultry (45.8%) and imported poultry (3.7%), but not in beef or pork. In the poultry processing plant, there is significant contamination with C. jejuni in chicken carcasses, equipment and workers' hands. This contamination increases during the defeathering and evisceration processes. RAPD analysis shows that contamination with C. jejuni is of intestinal origin. In a broiler farm, C. jejuni was first isolated from a faecal sample of broiler chicken after the 20th day of age. Two weeks later, all birds in this farm became C. jejuni positive. RAPD analysis indicated that C. jejuni spread rapidly from one broiler flock to the other flocks on the farm.
Tabke, M C; Sarturi, J O; Galyean, M L; Trojan, S J; Brooks, J C; Johnson, B J; Martin, J; Baggerman, J; Thompson, A J
2017-11-01
Effects of a tannic acid blend (ByPro; Silvateam USA, Ontario, CA) added to steam-flaked corn-based fishing diets on beef cattle growth performance, carcass characteristics, nutrient digestibility, fecal N volatilization, and meat lipid oxidation were evaluated. Steers ( = 144; 349 ± 25 kg initial BW) were blocked by initial BW and assigned randomly to 1 of 3 treatments with 12 pens/treatment and 4 steers/pen and fed ad libitum. Treatments included a control (CON; no ByPro) and ByPro fed at 30 or 60 g DM/steer daily (30-ByPro and 60-ByPro, respectively). Pen fecal samples were collected 7 d after cattle were shipped to slaughter for estimation of N volatilization. Strip loins were aged for 21 d for evaluation of color and antioxidant activity. Intake quadratically increased ( = 0.05) from d 0 to 35, whereas linear trends were observed for increased DMI from d 0 to 105 and d 0 to slaughter ( = 0.07 and = 0.06, respectively), resulting in a 3.7% greater overall DMI for 60-ByPro than for CON. No differences were detected for carcass-adjusted ADG ( = 0.65) or G:F ( = 0.17). Carcass characteristics including HCW ( = 0.52), fat thickness ( = 0.32), LM area ( = 0.57), quality grade ( = 0.44), yield grade ( = 0.29), and percentage of condemned livers ( = 0.13) were not affected by treatments. Apparent total tract digestibility of starch linearly decreased tendency ( = 0.03) with increasing ByPro dose, whereas tends for a linear decrease ( = 0.09) in CP and a quadratic increase ( = 0.09) in OM digestibility were observed. No effects of treatment ( ≥ 0.39) were noted for fecal N volatilization. An increase ( < 0.01) in metmyoglobin in strip loin steaks was observed with ByPro inclusion. Oxymyoglobin decreased ( < 0.01) as display day progressed, except on d 5, at which time CON and 30-ByPro steaks had lower proportions than 60-ByPro steaks. Only subtle changes in discoloration ratio and deoxymyoglobin were observed, whereas no effects ( ≥ 0.43) for pH or thiobarbituric acid reactive substances were noted. Feeding ByPro increased DMI during the first half of the feeding period without negatively affecting gain efficiency; however, fecal N retention was not altered by ByPro. ByPro did not negatively affect meat quality or carcass characteristics, and it did not seem to affect retail meat antioxidant activity.
Effect of slaughter age on foal carcass traits and meat quality.
Domínguez, R; Crecente, S; Borrajo, P; Agregán, R; Lorenzo, J M
2015-10-01
Meat has played a crucial role in human evolution and is an important component of a healthy and well-balanced diet due to its nutritional richness. Recent studies have shown that horsemeat may be considered as an alternative to other meat (such as beef or pork), and it may have a positive effect on human health from a nutritional point of view. This research was conducted to characterize the carcass measurement, meat quality (chemical composition, colour characteristics and textural traits) and nutritional value (fatty acid and amino acid composition) of foals slaughtered at 8 and 11 months of age (8 and 11 m groups). For this study, a total of 21 foals (10 and 11 animals from the 8 and 11-m groups, respectively) were used. The results obtained showed a positive influence on carcass characteristics with an increase in slaughter age, because 11 m animals had slightly higher values of live (275 v. 247 kg) and carcass weights (148 v. 133 kg), length of leg (72.86 v. 69.85 cm) and carcass (100.41 v. 96.30 cm) and perimeter of leg (97.68 v. 89.22 cm) compared with animals from the 8-m group. Regarding meat quality, only Fe-haeme and cholesterol content in chemical composition and luminosity (L*) in colour parameters showed significant differences. Foals from the 8-m group had the highest content of cholesterol (0.47 v. 0.28 mg/100 g of meat) and luminosity values (39.66 v. 37.88) and the lowest content of ash (1.20% v. 1.40%). In fatty acids content, only five out of 23 fatty acids showed differences between the two groups. However, an interesting change in the fatty acid profile occurred with an increase in the slaughter age. Foals from the 8-m group had the highest values of α-linolenic acid and n-3 fatty acids and the lowest values of linoleic and n-6 fatty acids, which is an interesting fact from a health point of view. Finally, slaughter age had no statistical influence on textural properties or amino acid content. As a main conclusion, animals slaughtered at 8 months of age had higher nutritional quality meat (with higher content of n-3 fatty acids) than meat from foals slaughtered at 11 months of age. The slaughter of animals at 8 months of age also reduced production costs because they ate a smaller amount of commercial fodder.
Incorporation of nisin into a meat binding system to inhibit bacteria on beef surfaces.
Cutter, C N; Siragusa, G R
1998-07-01
In two separate experiments, the bacteriocin, nisin, was incorporated into a commercially available meat binding system (Fibrimex) and applied to meat surfaces as a way of inhibiting the meat spoilage organism, Brochothrix thermosphacta during extended refrigerated storage. In experiment 1, pre-rigor lean beef carcass tissue (BCT) was inoculated with B. thermosphacta, left untreated (U), treated with 10 micrograms ml-1 nisin (N), Fibrimex (F) or Fibrimex containing 10 micrograms ml-1 nisin (FN), held aerobically at 4 degrees C for up to 7 d, and populations of B. thermosphacta and nisin activity determined. Experiment 2 determined the effects of the same treatments but on post-rigor, frozen and thawed lean BCT that was inoculated, vacuum-packaged, and stored at 4 degrees C for up to 14 d. In both experiments, N- and FN-treated tissues exhibited significantly lower populations of B. thermosphacta compared to U- and F-treated tissues, for the duration of refrigerated storage. Nisin activity was detected up to 7 d in N- and FN-treated samples from experiment 1. However, activity was detected only to days 0 and 2 in FN- and N-treated samples, respectively, from experiment 2. These studies indicate that the addition of a bacteriocin to a meat binding system and application to meat surfaces may be useful in reducing undesirable bacteria in restructured meat products.
Skeletal muscle and liver gene expression profiles in finishing steers supplemented with Amaize.
Elolimy, Ahmed A; Moisá, Sonia J; Brennan, Kristen M; Smith, Allison C; Graugnard, Daniel; Shike, Daniel W; Loor, Juan J
2018-05-29
Our main objective was to evaluate the effects of feeding α-amylase (Amaize, Alltech Inc., Nicholasville, KY, USA) for 140 days on skeletal muscle and liver gene transcription in beef steers. Steers fed Amaize had lower average daily gain (p = .03) and gain:feed ratio (p = .05). No differences (p > .10) in serum metabolites or carcass traits were detected between the two groups but Amaize steers tended (p < .15) to have increased 12th rib fat depth. Microarray analysis of skeletal muscle revealed 21 differentially expressed genes (DEG), where 14 were up-regulated and seven were down-regulated in Amaize-fed steers. The bioinformatics analysis indicated that metabolic pathways involved in fat formation and deposition, stress response, and muscle function were activated, while myogenesis was inhibited in Amaize-fed steers. The quantitative PCR results for liver revealed a decrease (p < .01) in expression of fatty acid binding protein 1 (FABP1) and 3-hydroxybutyrate dehydrogenase 1 (BDH1) with Amaize. Because these genes are key for intracellular fatty acid transport, oxidation and ketone body production, data suggest a reduction in hepatic lipid catabolism. Future work to investigate potential positive effects of Amaize on cellular stress response, muscle function, and liver function in beef cattle appears warranted. © 2018 Japanese Society of Animal Science.
Aldai, N; Aalhus, J L; Dugan, M E R; Robertson, W M; McAllister, T A; Walter, L J; McKinnon, J J
2010-03-01
A considerable amount of information has been generated on the feeding value and impact of corn dried distillers' grains with solubles (DDGS) on meat quality, whereas little is known about the effects of wheat DDGS on meat quality, and no direct comparison of these two sources of DDGS has been completed. The current study was conducted to examine the objective and subjective carcass and meat quality traits of cattle fed diets containing corn or wheat (20% or 40%) DDGS (DM basis) as compared to a standard barley-based finishing diet (control). In general, meat obtained from animals fed the barley-based control diet was slightly darker in colour (lower chroma and hue at 24 h, P<0.01) and less tender (highest proportion of tough shears at 2 d and lowest proportion of tender shears at 20 d). Meat from corn DDGS was rated as more tender and palatable than control samples (P<0.05), and 20% corn samples were rated better for beef flavour intensity (P<0.01) and desirability (P<0.05) than 40% corn DDGS samples. In contrast, meat from steers fed wheat DDGS showed intermediate characteristics between steers fed control and corn DDGS diets. Hence, feeding wheat DDGS had no negative effects, and feeding corn DDGS had some positive effects on meat quality characteristics of beef. Crown Copyright 2009. Published by Elsevier Ltd. All rights reserved.
Gragg, Sara E.; Loneragan, Guy H.; Brashears, Mindy M.; Arthur, Terrance M.; Bosilevac, Joseph M.; Kalchayanand, Norasak; Wang, Rong; Schmidt, John W.; Brooks, J. Chance; Shackelford, Steven D.; Wheeler, Tommy L.; Brown, Tyson R.; Edrington, Thomas S.
2013-01-01
Abstract Bovine peripheral lymph nodes (LNs), including subiliac LNs, have been identified as a potential source of human exposure to Salmonella enterica, when adipose trim containing these nodes is incorporated into ground beef. In order to gain a better understanding of the burden of S. enterica in peripheral LNs of feedlot and cull cattle, a cross-sectional study was undertaken in which 3327 subiliac LNs were collected from cattle at harvest in seven plants, located in three geographically distinct regions of the United States. Samples were collected in three seasons: Fall 2010, Winter/Spring 2011, and Summer/Fall 2011. A convenience sample of 76 LNs per day, 2 days per season (approximately 1 month apart), was collected per plant, from carcasses held in the cooler for no less than 24 h. Every 10th carcass half on a rail was sampled, in an attempt to avoid oversampling any single cohort of cattle. Median point estimates of S. enterica contamination were generally low (1.3%); however, median Salmonella prevalence was found to be greater in subiliac LNs of feedlot cattle (11.8%) compared to those of cull cattle (0.65%). Enumeration analysis of a subset of 618 feedlot cattle LNs showed that 67% of those harboring S. enterica (97 of 144) did so at concentrations ranging from <0.1 to 1.8 log10 CFU/g, while 33% carried a higher burden of S. enterica, with levels ranging from 1.9 to >3.8 log10 CFU/g. Serotyping of S. enterica isolated identified 24 serotypes, with the majority being Montevideo (44.0%) and Anatum (24.8%). Antimicrobial susceptibility phenotypes were determined for all isolates, and the majority (86.1%) were pansusceptible; however, multidrug-resistant isolates (8.3%) were also occasionally observed. As Salmonella contained within LNs are protected from carcass interventions, research is needed to define opportunities for mitigating the risk of Salmonella contamination in LNs of apparently healthy cattle. PMID:23566273
Muchenje, Voster
2018-01-01
Foodborne disease (FBD) is a global public health concern, and foods from animal sources have been associated with outbreaks of food-related illness. In this study, animal carcasses from the two abattoirs (HT1 and HT2) in the formal meat sector (FMS) and slaughter points in the informal meat sector (INMS) were examined at two stages of slaughter (before washing and after washing) for aerobic colony counts (ACC) and total viable count (TCC), as well as Escherichia coli and Staphylococcus aureus count. At each stage, carcasses were sampled by swabbing at the neck, brisket, flank, and rump. ACC for beef, mutton, and pork carcasses at HT1 and HT2 before washing were between 2.5–5.8, 2.2–4.7, and 2.7–3.7 mean log CFU/cm2, respectively, and TCC count before washing was highest on the neck of cattle (6.3 ± 2.4) and after washing was highest on the perineal of sheep (5.7 ± 6.9). In the INMS, TCC count was highest on the brisket (6.9 ± 3.2) and in the neck (5.5 ± 2.4). Higher ACC values of 6.2–6.7 mean log CFU/cm2 were obtained in the INMS. The highest count for E. coli (4.2 mean log CFU/cm2) after washing was in the neck, while the highest count for S. aureus (4.0 mean log CFU/cm2) was in the flank. All bacteria count in the INMS exceeded acceptable limits, and washing did not significantly reduce microbial load in meat in the FMS and INMS. Bacteria count in the FMS and INMS exceeded acceptable standards. However, meat processed in the INMS poses a more significant risk of FBD to consumers. PMID:29690529
Liang, R R; Zhu, H; Mao, Y W; Zhang, Y M; Zhu, L X; Cornforth, D; Wang, R H; Meng, X Y; Luo, X
2016-02-01
The objectives were to investigate intramuscular fat (IMF) content,Warner–Bratzler shear force(WBSF) and sensory attributes of Chinese fattened yellow crossbred steer beef with different quality grades, and to determine the relationship between WBSF and Chinese consumers' sensory tender. WBSF of grades A1 to A5 decreased from 50.6 N to 33.1 N with IMF % increased from4.26 to 24.55 (P b 0.05). Consumer panelists showed more likeability grades A4 and A5 with no difference between them. Grades A2 and A3 were slightly preferred (P b 0.05). Grade A1 was undesirable. A regression relationship between WBSF and sensory tender was found, which indicated that consumers disliked beef when WBSF N55.43 N and preferred those with WBSF b41.4 N. The range of 41.4 N to 55.43 N was intermediate. Hence, WBSF N55.43 & b41.4 N allow classification of tough and tender for beef tenderness for Chinese consumers, and grade A4 was recommended as suitable top grade.
USDA-ARS?s Scientific Manuscript database
With an increasing focus on preharvest food safety, rapid methods are required for the detection and quantification of foodborne pathogens such as Salmonella enterica in beef cattle. We validated the Atlas Salmonella Detection Assay (SEN), a nucleic acid amplification technology that targets Salmone...
Arias, R P; Unruh-Snyder, L J; Scholljegerdes, E J; Baird, A N; Johnson, K D; Buckmaster, D; Lemenager, R P; Lake, S L
2012-10-01
Two experiments were conducted to evaluate the effects of feeding corn modified wet distillers grain plus solubles (MWDGS) co-ensiled with direct-cut forage (DC) to beef steers, on feedlot performance and total tract digestibility. In Exp. 1, sixty-four crossbred Angus steers (n = 64; 329 ± 43 kg) were blocked by BW and randomly assigned to 1 of 4 dietary treatments: 1) corn-silage and soybean meal (CON), 2) DC co-ensiled with MWDGS (CO-EN), 3) haylage mixed with MWDGS at feeding (H+WDG), and 4) haylage mixed with dry distillers grains plus solubles at feeding (H+DDG). Steers were harvested when they reached an endpoint of 1.1 cm of 12th-rib back fat. In Exp. 2, four ruminally cannulated beef steers (initial BW = 556 ± 31 kg) were used in a 4 × 4 Latin square to evaluate digestibility of diets used in Exp. 1. Experimental periods were 14 d in length with 10 d for diet adaptation and 4 d for sample collection. Three linear orthogonal contrasts were used to compare effects of 1) CON vs. diets containing distillers grains (DGD), 2) CO-EN vs. diets where distillers grains were mixed at feeding (MIX), and 3) H+WDG vs. H+DDG. In Exp. 1, DMI was less (P < 0.001) for steers fed CON compared with those fed DGD and greatest (P < 0.001) for steers fed CO-EN compared with MIX. Corn-silage- and soybean-meal-fed steers had more days on feed than those fed DGD (P = 0.001). Body weight gain (P = 0.02) was greater for CO-EN compared with MIX. Fat thickness at the 12th and 13th ribs was greater (P = 0.03) for DGD steers compared with CON steers. Hot carcass weight was greater (P = 0.03) for steers fed CO-EN compared with those fed MIX. Steers fed CON resulted in greater marbling scores (P = 0.01) compared DGD-fed steers. Longissimus muscle area was greater (P = 0.01) for CON-fed steers compared with all other treatments. In Exp. 2, no differences (P > 0.10) in DM, OM, or N intakes were observed. Apparent total tract DM (P = 0.01) and N (P = 0.02) digestibility were greatest in steers fed CON compared with all others. Steers fed DGD had less (P = 0.02) rumen NH(3) concentrations compared with CON. The CON diet resulted in greater molar concentrations of VFA (P = 0.03) and decreased acetate to propionate ratio (P = 0.03) compared with all DGD. These data suggest that feeding MWDGS co-ensiled with direct-cut forage results in reduced diet digestibility but equal or greater feedlot performance and similar carcass and characteristics when compared with a corn diet supplemented with soybean meal and diets where MWDGS and DDGS were added at the mixer.
de Souza, Fabio Ricardo Pablos; Maione, Sandra; Sartore, Stefano; Soglia, Dominga; Spalenza, Veronica; Cauvin, Elsa; Martelli, Lucia Regina; Mercadante, Maria Eugênia Zerlotti; Sacchi, Paola; de Albuquerque, Lucia Galvão; Rasero, Roberto
2012-02-01
The objective of this study was to describe the VNTR polymorphism of the mucin 1 gene (MUC1) in three Nelore lines selected for yearling weight to determine whether allele and genotype frequencies of this polymorphism were affected by selection for growth. In addition, the effects of the polymorphism on growth and carcass traits were evaluated. Birth, weaning and yearling weights, rump height, Longissimus muscle area, backfat thickness, and rump fat thickness, were analyzed. A total of 295 Nelore heifers from the Beef Cattle Research Center, Instituto de Zootecnia de Sertãozinho, were used, including 41 of the control line, 102 of the selection line and 152 of the traditional. The selection and traditional lines comprise animals selected for higher yearling weight, whereas control line animals are selected for yearling weight close to the average. Five alleles were identified, with allele 1 being the most frequent in the three lines, especially in the lines selected for higher means for yearling weight. Heterozygosity was significantly higher in the control line. Association analyses showed significant effects of allele 1 on birth weight and weaning weight while the allele 3 exert significant effects on yearling weight and back fat thickness. Despite these findings, application of this marker to marker-assisted selection requires more consistent results based on the genotyping of a larger number of animals in order to increase the accuracy of the statistical analyses.
Persson, U Martin; Henders, Sabine; Cederberg, Christel
2014-11-01
The world's agricultural system has come under increasing scrutiny recently as an important driver of global climate change, creating a demand for indicators that estimate the climatic impacts of agricultural commodities. Such carbon footprints, however, have in most cases excluded emissions from land-use change and the proposed methodologies for including this significant emissions source suffer from different shortcomings. Here, we propose a new methodology for calculating land-use change carbon footprints for agricultural commodities and illustrate this methodology by applying it to three of the most prominent agricultural commodities driving tropical deforestation: Brazilian beef and soybeans, and Indonesian palm oil. We estimate land-use change carbon footprints in 2010 to be 66 tCO2 /t meat (carcass weight) for Brazilian beef, 0.89 tCO2 /t for Brazilian soybeans, and 7.5 tCO2 /t for Indonesian palm oil, using a 10 year amortization period. The main advantage of the proposed methodology is its flexibility: it can be applied in a tiered approach, using detailed data where it is available while still allowing for estimation of footprints for a broad set of countries and agricultural commodities; it can be applied at different scales, estimating both national and subnational footprints; it can be adopted to account both for direct (proximate) and indirect drivers of land-use change. It is argued that with an increasing commercialization and globalization of the drivers of land-use change, the proposed carbon footprint methodology could help leverage the power needed to alter environmentally destructive land-use practices within the global agricultural system by providing a tool for assessing the environmental impacts of production, thereby informing consumers about the impacts of consumption and incentivizing producers to become more environmentally responsible. © 2014 John Wiley & Sons Ltd.
Climate metrics and the carbon footprint of livestock products: where’s the beef?
NASA Astrophysics Data System (ADS)
Persson, U. Martin; Johansson, Daniel J. A.; Cederberg, Christel; Hedenus, Fredrik; Bryngelsson, David
2015-03-01
The livestock sector is estimated to account for 15% of global greenhouse gas (GHG) emissions, 80% of which originate from ruminant animal systems due to high emissions of methane (CH4) from enteric fermentation and manure management. However, recent analyses have argued that the carbon footprint (CF) of ruminant meat and dairy products are substantially reduced if one adopts alternative metrics for comparing emissions of GHGs—e.g., the 100 year global temperature change potential (GTP100), instead of the commonly used 100 year global warming potential (GWP100)—due to a lower valuation of CH4 emissions. This raises the question of which metric to use. Ideally, the choice of metric should be related to a climate policy goal. Here, we argue that basing current GHG metrics solely on temperature impact 100 years into the future is inconsistent with the current global climate goal of limiting warming to 2 °C, a limit that is likely to be reached well within 100 years. A reasonable GTP value for CH4, accounting for current projections for when 2 °C warming will be reached, is about 18, leading to a current CF of 19 kg CO2-eq. per kilo beef (carcass weight, average European system), 20% lower than if evaluated using GWP100. Further, we show that an application of the GTP metric consistent with a 2 °C climate limit leads to the valuation of CH4 increasing rapidly over time as the temperature ceiling is approached. This means that the CF for beef would rise by around 2.5% per year in the coming decades, surpassing the GWP based footprint in only ten years. Consequently, the impact on the livestock sector of substituting GTPs for GWPs would be modest in the near term, but could potentially be very large in the future due to a much higher (>50%) and rapidly appreciating CF.
Sources of Escherichia coli O157 and experiences over the past 15 years in Sheffield, UK.
Chapman, P A
2000-01-01
In the first documented outbreak of HC caused by Escherichia coli O157, which occurred in the North-west USA in 1982, there was a strong association between infection and prior consumption of ground beef from a chain of fast food restaurants. Foods of bovine origin, including beef, milk and dairy products, have since been implicated in many outbreaks of infection world-wide. Investigations during the course of outbreaks, or at random, have shown that cattle are a major reservoir of E. coli O157. E. coli O157 was isolated from cattle at slaughter in Sheffield in 1987, this being the first isolation from cattle in the UK. Following a cluster of cases in May/June 1992, an abattoir study showed the organism to be present in 4% of cattle at slaughter and on up to a third of carcasses from rectal swab-positive animals. E. coli O157 was isolated from a food source (unpasteurized milk), for the first time in the UK, in Sheffield in May 1993. During surveillance in 1995-6, E. coli O157 was isolated from 15.7% of cattle, with a monthly prevalence which varied from 5 to 37%. E. coli O157 was also isolated from 2.2% of sheep. During surveillance in 1996, E. coli O157 was isolated from 5.9% of samples of lamb products and from 1.5% of samples of beef products, despite the prevalence in cattle being much higher than in sheep. Work is in progress to try to explain this higher prevalence in lamb products. During 1997 in Sheffield, the only cases of E. coli O157 for which a confirmed source was established were associated with direct animal contact on farm visits. During on-farm investigations of these cases, E. coli O157 was isolated from faecal samples from adult cattle, calves, three different breeds of sheep, two different breeds of pigs, goats and a pony.
Castilhos, A M; Francisco, C L; Branco, R H; Bonilha, S F M; Mercadante, M E Z; Meirelles, P R L; Pariz, C M; Jorge, A M
2018-05-04
Evaluation of the body chemical composition of beef cattle can only be measured postmortem and those data cannot be used in real production scenarios to adjust nutritional plans. The objective of this study was to develop multiple linear regression equations from in vivo measurements, such as ultrasound parameters [backfat thickness (uBFT, mm), rump fat thickness (uRF, mm), and ribeye area (uLMA, cm2)], shrunk body weight (SBW, kg), age (AG, d), hip height (HH, m), as well as from postmortem measurements (composition of the 9th to 11th rib section) to predict the empty body and carcass chemical composition for Nellore cattle. Thirty-three young bulls were used (339 ± 36.15 kg and 448 ± 17.78 d for initial weight and age, respectively). Empty body chemical composition (protein, fat, water, and ash in kg) was obtained by combining noncarcass and carcass components. Data were analyzed using the PROC REG procedure of SAS software. Mallows' Cp values were close to the ideal value of number of independent variables in the prediction equations plus one. Equations to predict chemical components of both empty body and carcass using in vivo measurements presented higher R2 values than those determined by postmortem measurements. Chemical composition of the empty body using in vivo measurements was predicted with R2 > 0.73. Equations to predict chemical composition of the carcass from in vivo measurements showed R2 lower (R2< 0.68) than observed for empty body, except for the water (R2 = 0.84). The independent variables SBW, uRF, and AG were sufficient to predict the fat, water, energy components of the empty body, whereas for estimation of protein content the uRF, HH, and SBW were satisfactory. For the calculation of the ash, the SBW variable in the equation was sufficient. Chemical compounds from components of the empty body of Nellore cattle can be calculated by the following equations: protein (kg) = 47.92 + 0.18 × SBW - 1.46 × uRF - 30.72 × HH (R2 = 0.94, RMSPE = 1.79); fat (kg) = 11.33 + 0.16 × SBW + 2.09 × uRF - 0.06 × AG (R2 = 0.74, RMSPE = 4.18); water (kg) = - 34.00 + 0.55 × SBW + 0.10 × AG - 2.34 × uRF (R2 = 0.96, RMSPE = 5.47). In conclusion, the coefficients of determination (for determining the chemical composition of the empty body) of the equations derived from in vivo measures were higher than those of the equations obtained from rib section measurements taken postmortem, and better than coefficients of determination of the equations to predict the chemical composition of the carcass.
Martínez, A; Aldai, N; Celaya, R; Osoro, K
2010-04-01
To examine the extent of the effect of muscular hypertrophy character in beef of northern-Spanish breeds, animal performance and carcass characteristics of 152 finishing steers from 5 genotypes were studied: 32 yearling bulls from a rustic Asturiana de la Montaña (AM) breed, 96 yearling bulls from Asturiana de los Valles (AV) breed, divided in 3 groups depending on the presence of the gene responsible for double-muscling (i.e., 32 AV mh/mh, 32 AV mh/+, 32 AV +/+), and 24 yearling bulls from AM x AV cross were used. Each genotype was composed of 8 animals per year (4 animals per pen) for 4 yr, except for the AM x AV genotype, which was only evaluated in the last 3 yr of the experiment. All animals were fed indoors with concentrate meal and barley straw ad libitum. Average daily gains in AV animals (1.41 kg/d) were greater (P < 0.01) than in AM (1.12 kg/d), whereas AM x AV were intermediate (1.29 kg/d) to these. No significant differences (P = 0.604) in ADG were found among the 3 AV genotypes. Longer fattening periods (P < 0.001) were taken for AM animals to reach acceptable BW at slaughter. Double-muscled animals (AV mh/mh) were found to have the best feed efficiencies when expressed as G:F (P < 0.001). However, residual feed intake calculated on a daily basis showed a greater efficiency in AV mh/mh and AM than in other genotypes. Carcasses from double-muscled animals had greater BW, yield, conformation and compactness index, and less fat cover than the other genotypes (P < 0.001). Carcasses from AM breed were the lightest and had the worst conformation, whereas those from AM x AV generally presented intermediate characteristics between AV and AM. Double-muscled animals had the greatest LM weight and area. The sixth-rib dissection revealed a greater percentage of muscle (84.6%) and decreased percentages of subcutaneous fat (1.1%), intermuscular fat (4.7%), bone (8.5%), and other tissues (1.2%) in AV mh/mh compared with other genotypes. Water-holding capacity was greatest in AM and least in AV mh/mh. In conclusion, double-muscled AV bulls would provide the greatest economic returns at intensive feeding systems because of their greater efficiency, reduced feeding costs, greater carcass weight and conformation, and greater lean yields, though some LM characteristics (reduced fat content and water-holding capacity) could negatively affect the sensory attributes of the meat compared with other genotypes with greater fatness.
Specific fibre composition and metabolism of the rectus abdominis muscle of bovine Charolais cattle
2010-01-01
Background An important variability of contractile and metabolic properties between muscles has been highlighted. In the literature, the majority of studies on beef sensorial quality concerns M. longissimus thoracis. M. rectus abdominis (RA) is easy to sample without huge carcass depreciation and may appear as an alternative to M. longissimus thoracis for fast and routine physicochemical analysis. It was considered interesting to assess the muscle fibres of M. rectus abdominis in comparison with M. longissimus thoracis (LT) and M. triceps brachii (TB) on the basis of metabolic and contractile properties, area and myosin heavy chain isoforms (MyHC) proportions. Immuno-histochemical, histochemical, histological and enzymological techniques were used. This research concerned two populations of Charolais cattle: RA was compared to TB in a population of 19 steers while RA was compared to LT in a population of 153 heifers. Results RA muscle had higher mean fibre areas (3350 μm2 vs 2142 to 2639 μm2) than the two other muscles. In RA muscle, the slow-oxidative fibres were the largest (3957 μm2) and the fast-glycolytic the smallest (2868 μm2). The reverse was observed in TB muscle (1725 and 2436 μm2 respectively). In RA muscle, the distinction between fast-oxidative-glycolytic and fast-glycolytic fibres appeared difficult or impossible to establish, unlike in the other muscles. Consequently the classification based on ATPase and SDH activities seemed inappropriate, since the FOG fibres presented rather low SDH activity in this muscle in comparison to the other muscles of the carcass. RA muscle had a higher proportion of I fibres than TB and LT muscles, balanced by a lower proportion either of IIX fibres (in comparison to TB muscle) or of IIA fibres (in comparison to LT muscle). However, both oxidative and glycolytic enzyme activities were lower in RA than in TB muscle, although the LDH/ICDH ratio was higher in RA muscle (522 vs 340). Oxidative enzyme activities were higher in RA than in LT muscle, whereas glycolytic enzyme activity was lower. In RA muscle, contractile and metabolic properties appeared to be less well-correlated than in the two other muscles. Conclusions RA muscle has some particularities in comparison to the LT and TB muscles, especially concerning the unusual large cross-section surface of SO fibres and the very low oxidative activity of intermediate IIA fibres. PMID:20205735
Rezac, D J; Thomson, D U; Bartle, S J; Osterstock, J B; Prouty, F L; Reinhardt, C D
2014-06-01
An array of management tools exists within the beef industry to improve animal welfare and productivity; however, the ability to assess the outcomes of these tools is needed. Deficiencies in management commonly manifest as bovine respiratory disease complex or nutritional disorders such as acidosis; therefore, lung, liver, and rumen gross pathology lesions present at slaughter were measured as part of the Harvest Audit Program (HAP) and associations with performance determined. Individual gross pathology data from 19,229 cattle at commercial packing plants in Kansas and Texas were collected. Corresponding individual preharvest and carcass data were obtained on a subset of 13,226 cattle. Associations between lesions and performance were modeled using multivariable mixed effect models. Regression coefficients were used for estimation of lesion associative effects on continuous outcomes and odds ratios for dichotomous outcomes. Across the entire population, 67.3% of the cattle had no pulmonary lesions; 22.5 and 9.8% of cattle displayed mild and severe lesions, respectively. Severe pulmonary lesions were associated with a decreased ADG of 0.07 kg and a HCW 7.1 kg less than cohorts with no pulmonary lesions (P < 0.01). Overall, 68.6% of cattle observed had normal livers. Of cattle severely affected by liver abscesses (A+; 4.6%), 14.9% also displayed severe pulmonary lesions and 28.3% displayed mild pulmonary lesions. Rumenitis lesions were observed in 24.1% of the overall study population. Of cattle with mildly abscessed livers (A-), moderately abscessed livers (A), and severely abscessed livers, 20.6, 21.6, and 9.24% displayed mild or severe rumenitis lesions at slaughter. Severe rumenitis lesions were associated with a significant decrease in ADG and HCW (0.025 and 2.20 kg, respectively; P < 0.001). Although the majority of the cattle in this population would be considered low risk, after adjustments for cattle with multiple lesions, 22.9% of cattle in the overall population were observed with a severe lesion (lung, liver, or rumen). In conclusion, a gross pathology monitoring system is feasible and the 22.9% prevalence of severe lesions (lung, liver, or rumen) indicates that significant opportunity exists to improve beef cattle health, well-being, and productivity. Data generated using HAP may be used to support decisions concerning the implementation or removal of managerial practices and health interventions in beef cattle production systems.
Molecular epidemiology of Rhodococcus equi in slaughtered swine, cattle and horses in Poland.
Witkowski, Lucjan; Rzewuska, Magdalena; Takai, Shinji; Kizerwetter-Świda, Magdalena; Kita, Jerzy
2016-05-27
Rhodococcus equi is an emerging zoonotic presumably foodborne pathogen. Since the data on the worldwide prevalence of R. equi in meat animals are scarce, the present study aimed to investigate the molecular epidemiology of R. equi in swine, cattle and horse carcasses intended for human consumption in Poland. Totally 1028 lymph node samples were examined. R. equi was isolated from 26.6 % (105/395) swine and 1.3 % (3/234) bovine healthy submaxillary lymph nodes. In horses, R. equi was isolated only from 0.5 % (1/198) samples of middle tracheo-branchiales lymph node while no lymphocentrum retropharyngeum sample was positive (0/198). The purulent lesions were observed only in 0.8 % swine submaxillary lymph nodes samples (3/398) and in two of them R. equi was detected. All bovine and most of swine isolates (98.1 %) were vapB-positive. 87.9 % of swine isolates carried 95-kb type 5 plasmid, 3.7 % type 1 and plasmid types: 4, 7, 10, 11, 21, 31 were carried by a single isolate (0.9 %). All bovine isolates carried VAPB type 26. Single horse isolate was vapA-positive and carried plasmid VAPA 85-kb type I. The prevalence of vapB-positive R. equi in investigated healthy swine intended for human consumption was very high. Not only swine, but also even apparently healthy cattle or horse carcasses should be considered as a potential source of R. equi for humans, especially in countries where undercooked or raw beef or horsemeat is traditionally consumed.
Evaluation of wheat-based thin stillage as a water source for growing and finishing beef cattle.
Fisher, D J; McKinnon, J J; Mustafa, A F; Christensen, D A; McCartney, D
1999-10-01
Two trials were conducted to evaluate the nutritional value of wheat-based thin stillage as a water source for cattle. In Trial 1, 20 large-framed steers were fed a basal diet based primarily on barley grain and barley silage, with ad libitum access to water or thin stillage at one of three DM concentrations (2, 4, and 6.7%) in a completely randomized design. The trial consisted of a 70-d growing period and a finishing phase. In Trial 2, total-tract nutrient digestibility coefficients of the basal diet and water treatments fed in the growing period were determined in a randomized complete block design using 12 medium-framed steers. The results showed that when only DMI from the basal diet was considered, there was a linear reduction (P<.01) in DMI and a linear improvement (P<.01) in the gain:feed ratio with no effect on daily gain as thin stillage DM concentration increased. No differences were detected in DMI or efficiency of gain when total DMI (basal diet and thin stillage) was considered. Carcass traits indicated a trend toward increased (P<.06) carcass fat with increasing thin stillage DM concentration. Results of Trial 2 indicated a linear improvement (P<.05) in apparent digestibility of DM, CP, NDF, and energy of the total diet (basal diet and thin stillage) as thin stillage DM concentration increased. We concluded that supplementing growing and finishing cattle with thin stillage reduced the amount of the basal diet required for gain and improved nutrient utilization.
NASA Astrophysics Data System (ADS)
Medina, Marjorie B.
1999-01-01
Escherichia coli O157:H7 outbreaks were mostly due to consumption of undercooked contaminated beef which resulted in severe illness and several fatalities. Recalls of contaminated meat are costly for the meat industry. Our research attempts to understand the mechanisms of bacterial adhesion on animal carcass in order to eliminate or reduce pathogens in foods. We have reported the interactions of immobilized E. coli O157:H7 cells with extracellular matrix (ECM) components using a surface plasmon resonance biosensor (BIAcore). These studies showed that immobilized bacterial cells allowed the study of real-time binding interactions of bacterial surface with the ECM compounds, collagen I, laminin and fibronectin. Collagen I and laminin bound to the E. coli sensor surface with dissociation and association rates ranging from 106 to 109. Binding of collagen I and laminin mixture resulted in synergistic binding signals. An inhibition model was derived using collagen-laminin as the ligand which binds with E. coli sensor. A select group of naturally occurring food additives was evaluated by determining their effectivity in inhibiting the collagen-laminin binding to the bacterial sensor. Bound collagen-laminin was detached from the E. coli sensor surface with the aid of an organic acid. The biosensor results were verified with cell aggregation assays which were observed with optical and electron microscopes. These biosensor studies provided understanding of bacterial adhesion to connective tissue macromolecules. It also provided a model system for the rapid assessment of potential inhibitors that can be used in carcass treatment to inhibit or reduce bacterial contamination.
Double Muscling in Cattle: Genes, Husbandry, Carcasses and Meat
Fiems, Leo O.
2012-01-01
Simple Summary Selection for an increased meatiness in beef cattle has resulted in double-muscled (DM) animals, owing to the inactivation of the myostatin gene. These animals are characterized by an excellent conformation and an extremely high carcass yield, coinciding with a reduced organ mass. As a consequence, voluntary feed intake is reduced, but feed efficiency is considerably improved, although maintenance requirements are not clearly reduced. DM animals are more susceptible to respiratory disease, stress and dystocia, requiring extra attention for accommodation and welfare. Carcasses of DM animals are very lean, and intramuscular fat content is low. The fatty acid profile is different when compared with non-DM animals, containing less saturated fatty acids. Collagen content of the meat is lower, so that meat from double-muscled animals is mostly more tender. However, meat tenderness, color and juiciness are not always improved. A different metabolism as a consequence of faster glycolytic myofibers can be partly responsible for this phenomenon. DM animals are interesting for the producer and butcher, and beneficial for the consumer, if an appropriate nutrition and accommodation, and adequate slaughter conditions are taken into account. Abstract Molecular biology has enabled the identification of the mechanisms whereby inactive myostatin increases skeletal muscle growth in double-muscled (DM) animals. Myostatin is a secreted growth differentiation factor belonging to the transforming growth factor-β superfamily. Mutations make the myostatin gene inactive, resulting in muscle hypertrophy. The relationship between the different characteristics of DM cattle are defined with possible consequences for livestock husbandry. The extremely high carcass yield of DM animals coincides with a reduction in the size of most vital organs. As a consequence, DM animals may be more susceptible to respiratory disease, urolithiasis, lameness, nutritional stress, heat stress and dystocia, resulting in a lower robustness. Their feed intake capacity is reduced, necessitating a diet with a greater nutrient density. The modified myofiber type is responsible for a lower capillary density, and it induces a more glycolytic metabolism. There are associated changes for the living animal and post-mortem metabolism alterations, requiring appropriate slaughter conditions to maintain a high meat quality. Intramuscular fat content is low, and it is characterized by more unsaturated fatty acids, providing healthier meat for the consumer. It may not always be easy to find a balance between the different disciplines underlying the livestock husbandry of DM animals to realize a good performance and health and meat quality. PMID:26487034
May, M L; DeClerck, J C; Quinn, M J; DiLorenzo, N; Leibovich, J; Smith, D R; Hales, K E; Galyean, M L
2010-07-01
Two studies were conducted to evaluate the effects of corn (CDG) and sorghum (SDG) wet distillers grains with solubles on feedlot cattle performance, carcass characteristics, and apparent total tract digestion of nutrients. In Exp. 1, 224 steers were used in a randomized complete block design (initial BW 391.1 +/- 9.51 kg) and fed steam-flaked corn (SFC)-based diets consisting of (DM basis) 0% distillers grains (CON), 15% SDG, 30% SDG, 15% CDG, 30% CDG, 15% of a 50:50 blend of SDG and CDG, and 30% of a 50:50 blend of CDG and SDG. Decreased carcass-adjusted final BW and HCW (P < or = 0.05) were noted as the inclusion amount of distillers grains increased in the diet. Body weight gain efficiency did not differ among the CDG, 50:50 SDG and CDG blend, and CON treatments, but G:F was numerically less with either amount of SDG than for CON, and decreased (P < or = 0.05) as distillers grains were increased from 15 to 30%. Cattle fed CON had greater carcass yield grades than those fed the distillers grain diets (P < or = 0.05). In Exp. 2, crossbred beef steers (n = 36; initial BW 567.3 +/- 53.1 kg) were used in a generalized randomized block design and fed SFC-based diets with 0% distillers grains (CON) and 15% (DM basis) CDG or SDG. Digestibility was determined with a pulse dose of Cr(2)O(3). Feeding steers 15% CDG or SDG increased intakes of CP and NDF (P < or = 0.05), but intakes of DM, OM, and starch did not differ among treatments (P >o r = 0.07). Apparent total tract digestibilities of DM, OM, CP, NDF, and starch (P > or = 0.25) did not differ among the 3 treatments. Fecal pH averaged over all sampling times was not affected by treatment, nor were average fecal pH values for prefeeding samples (0, 24, 48, and 72 h after the pulse dose) or for samples taken after feeding (12, 36, and 60 h after the pulse dose; P > or = 0.11). Results suggest that with 15% distillers grains in the DM, G:F was similar for cattle fed the CDG, 50:50 SDG and CDG blend, and CON diets. Feeding 30 vs. 15% distillers grains decreased G:F, but including 15% CDG or SDG in SFC-based diets did not affect apparent total tract digestibilities in feedlot steers.
Swyers, K L; Wagner, J J; Dorton, K L; Archibeque, S L
2014-06-01
Two hundred fifty-two cross-bred yearling steers (406 ± 24 kg BW) were used in a completely randomized block design with a 2 × 2 factorial arrangement of treatments (7 pens/treatment) to evaluate the effects of dietary Saccharomyces cerevisiae fermentation product (SFP) and monensin (MON) on growth performance and carcass characteristics. Dietary treatments arranged as a 2 × 2 factorial were 1) with or without SFP and 2) with or without MON. Finishing diets contained 19.7% of DM as dried distiller's grains with solubles. Both SFP and MON were added in the total mixed ration in place of an equal amount of cornmeal (DM basis; target intake = 2.8 g of SFP and 33 mg of MON/kg of dietary DM). Each treatment group was offered ad libitum access to a transition ration from d 1 to 8 and then to the finishing ration from d 9 to 125. Body weights were collected on d 0, 28, 56, 84, 110, and 125. Initial and final BW was an average of 2-d weights (d -1 and 0 and d 124 and 125, respectively). Steers were shipped for harvest on d 125. Overall ADG was decreased (P = 0.03) in steers supplemented with SFP, but final BW was similar among treatments. Feeding SFP was associated with lighter (P < 0.01) HCW and a greater (P = 0.01) number of carcasses grading USDA Choice. Twelfth rib fat thickness was not affected by SFP (P = 0.82) or MON (P = 0.35), but numerical decreases in 12th rib fat thickness among cattle receiving SFP or MON alone contributed to a tendency (P = 0.07) for greater 12 rib fat thickness when SFP and MON were provided. There was no effect of treatment on cost of gain (P ≥ 0.21). The effects of SFP in the current study may have been limited in heavy yearling steers due to consumption of a finishing diet containing 19.7% dried distiller's grains with solubles.
Kim, Y. I.; Park, J. M.; Lee, Y. H.; Lee, M.; Choi, D. Y.; Kwak, W. S.
2015-01-01
This study was conducted to determine the effects of feeding by-product feed (BF)-based silage on the performance, blood metabolite parameters, and carcass characteristics of Hanwoo steers. The BF-based silage was composed of 50% spent mushroom substrate, 21% recycled poultry bedding, 15% cut ryegrass straw, 10.8% rice bran, 2% molasses, 0.6% bentonite, and 0.6% microbial additive (on a wet basis), and ensiled for over 5 d. Fifteen steers were allocated to three diets during the growing and fattening periods (3.1 and 9.8 months, respectively): a control diet (concentrate mix and free access to rice straw), a 50% BF-based silage diet (control diet+50% of maximum BF-based silage intake), and a 100% BF-based silage diet (the same amount of concentrate mix and ad libitum BF-based silage). The BF-based silage was fed during the growing and fattening periods, and was replaced with larger particles of rice straw during the finishing period. After 19.6 months of the whole period all the steers were slaughtered. Compared with feeding rice straw, feeding BF-based silage tended (p = 0.10) to increase the average daily gain (27%) and feed efficiency (18%) of the growing steers, caused by increased voluntary feed intake. Feeding BF-based silage had little effect on serum constituents, electrolytes, enzymes, or the blood cell profiles of fattening steers, except for low serum Ca and high blood urea concentrations (p<0.05). Feeding BF-based silage did not affect cold carcass weight, yield traits such as back fat thickness, longissimus muscle area, yield index or yield grade, or quality traits such as meat color, fat color, texture, maturity, marbling score, or quality grade. However, it improved good quality grade (1+ and 1++) appearance rates (60% for the control group vs 100% for the BF-based silage-fed groups). In conclusion, cheap BF-based silage could be successfully used as a good quality roughage source for beef cattle. PMID:25557813
Kim, Y I; Park, J M; Lee, Y H; Lee, M; Choi, D Y; Kwak, W S
2015-02-01
This study was conducted to determine the effects of feeding by-product feed (BF)-based silage on the performance, blood metabolite parameters, and carcass characteristics of Hanwoo steers. The BF-based silage was composed of 50% spent mushroom substrate, 21% recycled poultry bedding, 15% cut ryegrass straw, 10.8% rice bran, 2% molasses, 0.6% bentonite, and 0.6% microbial additive (on a wet basis), and ensiled for over 5 d. Fifteen steers were allocated to three diets during the growing and fattening periods (3.1 and 9.8 months, respectively): a control diet (concentrate mix and free access to rice straw), a 50% BF-based silage diet (control diet+50% of maximum BF-based silage intake), and a 100% BF-based silage diet (the same amount of concentrate mix and ad libitum BF-based silage). The BF-based silage was fed during the growing and fattening periods, and was replaced with larger particles of rice straw during the finishing period. After 19.6 months of the whole period all the steers were slaughtered. Compared with feeding rice straw, feeding BF-based silage tended (p = 0.10) to increase the average daily gain (27%) and feed efficiency (18%) of the growing steers, caused by increased voluntary feed intake. Feeding BF-based silage had little effect on serum constituents, electrolytes, enzymes, or the blood cell profiles of fattening steers, except for low serum Ca and high blood urea concentrations (p<0.05). Feeding BF-based silage did not affect cold carcass weight, yield traits such as back fat thickness, longissimus muscle area, yield index or yield grade, or quality traits such as meat color, fat color, texture, maturity, marbling score, or quality grade. However, it improved good quality grade (1(+) and 1(++)) appearance rates (60% for the control group vs 100% for the BF-based silage-fed groups). In conclusion, cheap BF-based silage could be successfully used as a good quality roughage source for beef cattle.
About the age and habitat of the Kirgilyakh mammoth (Dima), Western Beringia
NASA Astrophysics Data System (ADS)
Lozhkin, A. V.; Anderson, P. M.
2016-08-01
The unearthing in 1977 of a complete frozen carcass of a young mammoth, known as the Kirgilyakh mammoth or Dima: 1) provided the first opportunity for detailed study of the anatomy of a mammoth calf; 2) provided a more detailed understanding of interstadial landscapes; and 3) suggested paleoclimatic variability occurred in Western Beringia during marine isotope stage (MIS) 3. Limited access to early Russian literature resulted in unfortunate misinformation in English-language publications. Since then, six other juvenile carcasses have been discovered in northern Siberia and additional Late Pleistocene paleobotanical records have increased understanding of MIS2 and MIS3 environments. Given the new data, it seems timely to re-examine information about the Kirgilyakh mammoth in the context of: 1) correcting mistakes about the age and environments of the site, including the manner of the mammoth's death; 2) comparing paleoenvironmental settings with that of other young mammoth carcasses; and 3) revisiting the concept of mammoth-steppe. This re-examination, which places the Kirgilyakh results in a broader spatial-temporal setting, reinforces the idea that climatic variability, including the Kirgilyakh cool interval, characterized MIS3. Unstable landscapes in mountains and lowlands were key factors in deaths of the Siberian mammoth calves. The prevalence of tundra in MIS2 model reconstructions and abundance of paleobotanical data indicating mesic tundra and forest during MIS3 suggest that classification of these intervals as mammoth-steppe is problematic.
Woerner, D R; Tatum, J D; Engle, T E; Belk, K E; Couch, D W
2011-01-01
A 4 × 2 factorial arrangement of treatments (4 growth-enhancement treatments × 2 sex classes) was used to quantify effects of initial implanting (I-implant, d 0), terminal implanting (T-implant, d 63), and feeding ractopamine hydrochloride [RAC, 200 mg/(animal/d)] for the last 28 d on feed on carcass characteristics and LM shear force (WBSF) of calf-fed steers (n = 159) and heifers (n = 132). Growth-enhancement treatments included the following: TRT1, T-implant only; TRT2, I-implant and RAC; TRT3, I-implant and T-implant; TRT4, I-implant, T-implant, and RAC. Growth responses (BW and ADG) were measured in 3 segments of the finishing period: 1) d 0 to 63, 2) d 63 to 28 d before slaughter, and 3) final 28 d. Cattle were slaughtered after 152, 166, or 180 d of finishing; carcass data were collected after a 48-h chill; and LM WBSF was measured at 3, 7, 14, 21, and 28 d postmortem. A priori contrasts were constructed to test effects associated with use vs. exclusion of growth enhancement in each segment of the finishing period. The interaction between sex class and treatment was not significant (P > 0.05) for any trait tested, indicating that the 4 treatments elicited similar effects in both sexes. Initial implanting improved (P < 0.001) ADG from d 0 to 63 by 11.5%, terminal implanting improved (P < 0.001) ADG from d 63 to 28 d before slaughter by 15%, and supplementing twice-implanted cattle with RAC enhanced ADG during the final 28 d of finishing by 12%. Effects of I-implant, T-implant, and RAC resulted in LM area increases of 3 cm(2) (P = 0.015), 6 cm(2) (P < 0.001), and 3 cm(2) (P = 0.011), respectively, and HCW responses of 11 kg (P = 0.011), 16 kg (P = 0.001), and 6 kg (P = 0.195), respectively. Initial implanting resulted in a 20-point reduction (P = 0.097) in marbling, and T-implant reduced marbling by 25 points (P = 0.04), whereas marbling score was unaffected (P = 0.236) by RAC supplementation. Cattle that received only 1 implant (TRT1 and TRT2) produced carcasses with greater (P = 0.026) mean marbling scores and greater (P = 0.01) rates of conformity to beef carcass marketing specifications for HCW, quality grade, yield grade, and LM area than did cattle that were implanted twice (TRT3 and TRT4). Values for LM WBSF were not affected (P > 0.05) by initial or terminal implanting; however, RAC supplementation increased (P = 0.007) mean LM WBSF by 0.23 kg, which translated into a reduction (P = 0.007) in predicted consumer acceptance of LM steaks.
Depauw, Sarah; Hesta, M; Whitehouse-Tedd, K; Stagegaard, J; Buyse, J; Janssens, G P J
2012-01-01
This study evaluated nutrient intake and relevant blood parameters of 14 captive cheetahs, randomly assigned to a meat-only diet (supplemented beef, SB) or a whole prey diet (whole rabbit, WR) for 4 weeks each. Despite a higher food intake, daily metabolizable energy intake was lower when fed WR (308 kJ BW(-1) ) compared with SB (347 kJ BW(-1) ) (P = 0.002). The ratio of protein to fat was markedly lower for WR (2.3:1) compared with SB (8.8:1), which was reflected in higher serum urea levels when fed SB (P = 0.033), and a tendency for elevated cholesterol levels when fed WR (P = 0.055). Taurine intake of cheetahs fed WR was low (0.06% on DM basis); however, analytical error during taurine analysis cannot be ruled out. Feeding WR resulted in a well-balanced mineral intake, in contrast to SB. The latter provided a low calcium:phosphorus ratio (1:2.3), thereby increasing the risk of metabolic bone disease. The high zinc content of SB (200 mg/kg DM), compared with WR (94 mg/kg DM), was reflected in higher serum zinc concentrations (P = 0.011). Feeding WR resulted in an increase in serum vitamin A (P = 0.011). Therefore, the risk of hypervitaminosis A in captive cheetahs when fed WR exclusively on a long-term basis should be evaluated. Our findings suggest that neither diet is likely to provide appropriate nutrition to captive cheetahs when fed exclusively. © 2011 Wiley Periodicals, Inc.
Bird, Patrick; Flannery, Jonathan; Crowley, Erin; Agin, James R; Goins, David; Monteroso, Lisa
2016-07-01
The 3M™ Molecular Detection Assay (MDA) 2 - Salmonella uses real-time isothermal technology for the rapid and accurate detection of Salmonella spp. from enriched select food, feed, and food-process environmental samples. The 3M MDA 2 - Salmonella was evaluated in a multilaboratory collaborative study using an unpaired study design. The 3M MDA 2 - Salmonella was compared to the U.S. Food and Drug Administration Bacteriological Analytical Manual Chapter 5 reference method for the detection of Salmonella in creamy peanut butter, and to the U.S. Department of Agriculture, Food Safety and Inspection Service Microbiology Laboratory Guidebook Chapter 4.08 reference method "Isolation and Identification of Salmonella from Meat, Poultry, Pasteurized Egg and Catfish Products and Carcass and Environmental Samples" for the detection of Salmonella in raw ground beef (73% lean). Technicians from 16 laboratories located within the continental United States participated. Each matrix was evaluated at three levels of contamination: an uninoculated control level (0 CFU/test portion), a low inoculum level (0.2-2 CFU/test portion), and a high inoculum level (2-5 CFU/test portion). Statistical analysis was conducted according to the probability of detection (POD) statistical model. Results obtained for the low inoculum level test portions produced difference in collaborator POD values of 0.03 (95% confidence interval, -0.10 to 0.16) for raw ground beef and 0.06 (95% confidence interval, -0.06 to 0.18) for creamy peanut butter, indicating no statistically significant difference between the candidate and reference methods.
Lean, Ian J.; Thompson, John M.; Dunshea, Frank R.
2014-01-01
This study is a meta-analysis of the effects of the beta-agonists zilpaterol hydrochloride (ZH) and ractopamine hydrochloride (RAC) on feedlot performance, carcase characteristics of cattle and Warner Bratzler shear force (WBSF) of muscles. It was conducted to evaluate the effect of the use of these agents on beef production and meat quality and to provide data that would be useful in considerations on the effect of these agents on meat quality in Meat Standards Australia evaluations. We conducted a comprehensive literature search and study assessment using PubMed, Google Scholar, ScienceDirect, Scirus, and CAB and identification of other studies from reference lists in papers and searches. Searches were based on the key words: zilpaterol, zilmax, ractopamine, optaflexx, cattle and beef. Studies from theses obtained were included. Data were extracted from more than 50 comparisons for both agents and analysed using meta-analysis and meta-regression. Both agents markedly increased weight gain, hot carcase weight and longissimus muscle area and increased the efficiency of gain:feed. These effects were particularly large for ZH, however, fat thickness was decreased by ZH, but not RAC. Zilpaterol also markedly increased WBSF by 1.2 standard deviations and more than 0.8 kg, while RAC increased WBSF by 0.43 standard deviations and 0.2 kg. There is evidence in the ZH studies, in particular, of profound re-partitioning of nutrients from fat to protein depots. This work has provided critically needed information on the effects of ZH and RAC on production, efficiency and meat quality. PMID:25548908
Rajić, Andrijana; Waddell, Lisa A; Sargeant, Jan M; Read, Susan; Farber, Jeff; Firth, Martin J; Chambers, Albert
2007-05-01
Canada's vision for the agri-food industry in the 21st century is the establishment of a national food safety system employing hazard analysis and critical control point (HACCP) principles and microbiological verification tools, with traceability throughout the gate-to-plate continuum. Voluntary on-farm food safety (OFFS) programs, based in part on HACCP principles, provide producers with guidelines for good production practices focused on general hygiene and biosecurity. OFFS programs in beef cattle, swine, and poultry are currently being evaluated through a national recognition program of the Canadian Food Inspection Agency. Mandatory HACCP programs in federal meat facilities include microbial testing for generic Escherichia coli to verify effectiveness of the processor's dressing procedure, specific testing of ground meat for E. coli O157:H7, with zero tolerance for this organism in the tested lot, and Salmonella testing of raw products. Health Canada's policy on Listeria monocytogenes divides ready-to-eat products into three risk categories, with products previously implicated as the source of an outbreak receiving the highest priority for inspection and compliance. A national mandatory identification program to track livestock from the herd of origin to carcass inspection has been established. Can-Trace, a data standard for all food commodities, has been designed to facilitate tracking foods from the point of origin to the consumer. Although much work has already been done, a coherent national food safety strategy and concerted efforts by all stakeholders are needed to realize this vision. Cooperation of many government agencies with shared responsibility for food safety and public health will be essential.
Chagnot, Caroline; Agus, Allison; Renier, Sandra; Peyrin, Frédéric; Talon, Régine; Astruc, Thierry; Desvaux, Mickaël
2013-01-01
Enterohemorrhagic Escherichia coli (EHEC) O157:H7 are responsible for repeated food-poisoning cases often caused by contaminated burgers. EHEC infection is predominantly a pediatric illness, which can lead to life-threatening diseases. Ruminants are the main natural reservoir for EHEC and food contamination almost always originates from faecal contamination. In beef meat products, primary bacterial contamination occurs at the dehiding stage of slaughtering. The extracellular matrix (ECM) is the most exposed part of the skeletal muscles in beef carcasses. Investigating the adhesion to the main muscle fibrous ECM proteins, insoluble fibronectin, collagen I, III and IV, laminin-α2 and elastin, results demonstrated that the preceding growth conditions had a great influence on subsequent bacterial attachment. In the tested experimental conditions, maximal adhesion to fibril-forming collagens I or III occurred at 25°C and pH 7. Once initially adhered, exposure to lower temperatures, as applied to meat during cutting and storage, or acidification, as in the course of post-mortem physiological modifications of muscle, had no effect on detachment, except at pHu. In addition, dense biofilm formation occurred on immobilized collagen I or III and was induced in growth medium supplemented with collagen I in solution. From this first comprehensive investigation of EHEC adhesion to ECM proteins with respect to muscle biology and meat processing, new research directions for the development of innovative practices to minimize the risk of meat contamination are further discussed.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Purchase of livestock by packers on a carcass grade, carcass weight, or carcass grade and weight basis. 201.99 Section 201.99 Animals and Animal... livestock by packers on a carcass grade, carcass weight, or carcass grade and weight basis. (a) Each packer...
Lee, C; Araujo, R C; Koenig, K M; Beauchemin, K A
2017-08-01
A finishing feedlot study was conducted with beef steers to determine effects of encapsulated nitrate (EN) on growth performance, carcass characteristics, methane production, and nitrate (NO) residues in tissues. The 132 crossbred steers were backgrounded in a feedlot for 91 d and transitioned for 28 days to the high-concentrate diets evaluated in the present study, maintaining the treatment and pen assignments designated at the start of the backgrounding period. The steers were initially assigned to 22 pens (6 animals per pen) in a randomized complete block design with BW (18 pens) and animals designated for methane measurement (4 pens) as blocking factors. Five animals in each pen designated for methane measurement (total of 20 animals) were monitored for methane emissions in respiratory chambers twice during the experiment. Pens received 3 dietary treatments (7 pens each): Control, a finishing diet supplemented with urea; 1.25% EN, control diet supplemented with 1.25% encapsulated NO in dietary DM that partially replaced urea; and 2.5% EN, control diet supplemented with 2.5% EN (DM basis) fully replacing urea. The final pen designated only for methane measurement received a fourth dietary treatment, 2.3% UEN, the control diet supplemented with unencapsulated NO (UEN) fully replacing urea. The cattle weighed 449 ± SD 32 kg at the start of the 150-d finishing period. The 2.5% EN diet decreased ( < 0.01) DMI compared with Control and 1.25% EN diets. Feeding EN tended to increase ( = 0.092) ADG compared with Control, and G:F was improved ( < 0.01) for EN compared with Control. No differences in methane production (g/d) and yield (g/kg DMI) were observed among treatments. Inclusion of EN in the diets increased ( ≤ 0.03) sorting in favor of large and medium particles and against small and fine particles. Plasma NO and NO concentrations were elevated ( < 0.01) with EN in a dose-response manner, but total blood methemoglobin levels for all treatments were low, below the detection limit. Feeding EN increased ( < 0.01) NO concentrations of samples from muscle, fat, liver, and kidney; NO concentrations of these tissues were similar between 1.25% EN and 2.3% UEN. In conclusion, inclusion of 2.5% EN in a finishing diet (DM basis; about 2% NO) did not cause NO toxicity or any health problems in the long term. In comparison with supplemental urea, feeding EN improved feed efficiency despite increases in sorting against dietary EN.
Hagenmaier, J A; Reinhardt, C D; Bartle, S J; Henningson, J N; Ritter, M J; Calvo-Lorenzo, M S; Vogel, G J; Guthrie, C A; Siemens, M G; Thomson, D U
2017-05-01
The effects of handling intensity on the physiological response and carcass characteristics of feedlot cattle fed ractopamine hydrochloride were evaluated at the time of transport to slaughter. Eighty steers (BW = 668 ± 36 kg) representing 10 lots of similar breed, frame size, and degree of finish were blocked by lot, stratified by weight, and randomly assigned to 1 of 2 handling intensities (HI) over a 1,600 m dirt alley course: 1) low-stress handling (LSH) or 2) high-stress handling (HSH). For the LSH treatment, 4 penmates were kept at a walk with the use of a lead rider. For the HSH treatment, 4 penmates were kept at a minimum of a trot and received 2 applications of an electric prod (approximately 1 s per impulse) at 2 separate instances: first in the alley before post-handling sampling, and again during loading for transportation to the abattoir. Behavioral observations and physical indicators of stress were recorded a minimum of 1 h before handling (baseline), immediately after handling (POSTHAND), and while in lairage after a 200 km transport to the abattoir. Vital parameters were recorded at baseline and POSTHAND. Venous blood samples were collected via jugular venipuncture at baseline and POSTHAND, and mixed arterial and venous blood samples were collected during exsanguination at slaughter. Muscle tremors tended to be more prevalent in HSH cattle at POSTHAND ( = 0.10). The HSH cattle tended to have greater POSTHAND heart rate ( = 0.08); however, there was no effect of HI on POSTHAND respiration rate or rectal temperature ( 0.34). The HSH cattle had greater lactate, epinephrine, norepinephrine, cortisol, and glucose concentrations at POSTHAND ( ≤ 0.02). Additionally, HSH cattle had lower POSTHAND blood pH, bicarbonate, base excess, and partial pressure carbon dioxide ( < 0.0001). Bicarbonate concentrations were greater in HSH cattle at slaughter ( = 0.05); however, there were no differences between HI treatments for the remaining blood variables ( 0.11). Concentrations of stress hormones and CK were significantly greater at slaughter relative to baseline and POSTHAND for both LSH and HSH cattle ( < 0.001). These findings suggest cattle trotted without a lead rider develop metabolic acidosis, and illustrate the importance of low-stress handling at the time of transport for slaughter. Further research is warranted to develop strategies to mitigate stress at the time of transport and ensure the welfare of beef cattle presented to abattoirs.
Cafe, L M; McIntyre, B L; Robinson, D L; Geesink, G H; Barendse, W; Pethick, D W; Thompson, J M; Greenwood, P L
2010-09-01
Effects and interactions of calpain-system tenderness gene markers on objective meat quality traits of Brahman (Bos indicus) cattle were quantified within 2 concurrent experiments at different locations. Cattle were selected for study from commercial and research herds at weaning based on their genotype for calpastatin (CAST) and calpain 3 (CAPN3) gene markers for beef tenderness. Gene marker status for mu-calpain (CAPN1-4751 and CAPN1-316) was also determined for inclusion in statistical analyses. Eighty-two heifer and 82 castrated male cattle with 0 or 2 favorable alleles for CAST and CAPN3 were studied in New South Wales (NSW), and 143 castrated male cattle with 0, 1, or 2 favorable alleles for CAST and CAPN3 were studied in Western Australia (WA). The cattle were backgrounded for 6 to 8 mo and grain-fed for 117 d (NSW) or 80 d (WA) before slaughter. One-half the cattle in each experiment were implanted with a hormonal growth promotant during feedlotting. One side of each carcass was suspended from the Achilles tendon (AT) and the other from the pelvis (tenderstretch). The M. longissimus lumborum from both sides and the M. semitendinosus from the AT side were collected; then samples of each were aged at 1 degrees C for 1 or 7 d. Favorable alleles for one or more markers reduced shear force, with little effect on other meat quality traits. The size of effects of individual markers varied with site, muscle, method of carcass suspension, and aging period. Individual marker effects were additive as evident in cattle with 4 favorable alleles for CAST and CAPN3 markers, which had shear force reductions of 12.2 N (P < 0.001, NSW) and 9.3 N (P = 0.002, WA) in AT 7 d aged M. longissimus lumborum compared with those with no favorable alleles. There was no evidence (all P > 0.05) of interactions between the gene markers, or between the hormonal growth promotant and gene markers for any meat quality traits. This study provides further evidence that selection based on the CAST or CAPN3 gene markers improves meat tenderness in Brahman cattle, with little if any detrimental effects on other meat quality traits. The CAPN1-4751 gene marker also improved beef tenderness without affecting other objective meat quality traits in heterozygous cattle compared with homozygotes for the unfavorable allele.
von Müffling, Theda; Smaijlovic, Muhamed; Nowak, Bernhard; Sammet, Katharina; Bülte, Michael; Klein, Günter
2007-06-30
The aim of this study was to gather more information on the spread of VTEC serotypes, genetic profiles and resistance patterns from pigs or pork and from cattle or beef in different areas, and to improve detection of the source of outbreaks with a wider data pool. Of 130 Escherichia coli samples isolated from a cattle slaughter house and beef retail products in Sarajevo, Bosnia and Herzegovina (BiH), seven were identified as verotoxigenic (VTEC). In comparison, 22 VTEC of 264 E. coli isolates were isolated from bovine faeces (14) and beef products (8) from Germany. Furthermore 23 VTEC of 76 isolates were identified from pig carcasses (10), faeces (9) and pork products (4) from Germany. Gene detection and serotyping were carried out in our laboratory and in the National Reference Laboratory. Antimicrobial resistance was tested with the dilution method in microtitre plates. All porcine isolates belonged to serotypes thus far not associated with human disease. Bovine VTEC were either serotypes commonly associated with human diseases (O157:H7, O103:H2, O157:H-) or rare serotypes. One serotype (O96:H19) was found only in isolates from Sarajevo. Most German VTEC, especially those of porcine origin, had only vtx2 genes, whereas all Bosnian isolates had vtx1 and vtx2 genes. The eae gene was found only in "classical" VTEC serotypes. All 52 VTEC (100%) investigated were resistant to the three sulfonamides tested; porcine isolates were mainly resistant to oxytetracycline (43%) and chlortetracycline (37%), bovine isolates mainly to trimethoprim/sulfamethoxazole and ampicillin (10% each). If sulfonamide resistances are disregarded, more than half (53.8%) of porcine VTEC were multiresistant and one-fourth (25%) of German bovine isolates, but none of the Bosnian bovine isolates. The results show the considerable spread of resistances in VTEC. These results also point out the necessity of gathering data from different geographical areas in order to be able to identify typical local variations in serotypes or gene expression and thus to trace human infections more quickly to their source.
Cooke, R F
2014-12-01
Temperament in cattle is defined as the fear-related behavioral responses when exposed to human handling. Our group evaluates cattle temperament using 1) chute score on a 1 to 5 scale that increases according to excitable behavior during restraint in a squeeze chute, 2) exit velocity (speed of an animal exiting the squeeze chute), 3) exit score (dividing cattle according to exit velocity into quintiles using a 1 to 5 scale where 1=cattle in the slowest quintile and 5=cattle in the fastest quintile), and 4) temperament score (average of chute and exit scores). Subsequently, cattle are assigned a temperament type of adequate temperament (ADQ; temperament score≤3) or excitable temperament (EXC; temperament score>3). To assess the impacts of temperament on various beef production systems, our group associated these evaluation criteria with productive, reproductive, and health characteristics of Bos taurus and Bos indicus-influenced cattle. As expected, EXC cattle had greater plasma cortisol vs. ADQ cattle during handling, independent of breed type (B. indicus×B. taurus, P<0.01; B. taurus, P<0.01; B. indicus, P=0.04) or age (cows, P<0.01; heifers or steers, P<0.01). In regards to reproduction, EXC females had reduced annual pregnancy rates vs. ADQ cohorts across breed types (B. taurus, P=0.03; B. indicus, P=0.05). Moreover, B. taurus EXC cows also had decreased calving rate (P=0.04), weaning rate (P=0.09), and kilograms of calf weaned/cow exposed to breeding (P=0.08) vs. ADQ cohorts. In regards to feedlot cattle, B. indicus EXC steers had reduced ADG (P=0.02) and G:F (P=0.03) during a 109-d finishing period compared with ADQ cohorts. Bos taurus EXC cattle had reduced weaning BW (P=0.04), greater acute-phase protein response on feedlot entry (P≤0.05), impaired feedlot receiving ADG (P=0.05), and reduced carcass weight (P=0.07) vs. ADQ cohorts. Acclimating B. indicus×B. taurus or B. taurus heifers to human handling improved temperament (P≤0.02), reduced plasma cortisol (P<0.01), and hastened puberty attainment (P≤0.02). However, no benefits were observed when mature cows or feeder cattle were acclimated to human handling. In conclusion, temperament impacts productive, reproductive, and health characteristics of beef cattle independent of breed type. Hence, strategies to improve herd temperament are imperative for optimal production efficiency of beef operations based on B. taurus and B. indicus-influenced cattle.
Jackman, Patrick; Sun, Da-Wen; Allen, Paul; Valous, Nektarios A; Mendoza, Fernando; Ward, Paddy
2010-04-01
A method to discriminate between various grades of pork and turkey ham was developed using colour and wavelet texture features. Image analysis methods originally developed for predicting the palatability of beef were applied to rapidly identify the ham grade. With high quality digital images of 50-94 slices per ham it was possible to identify the greyscale that best expressed the differences between the various ham grades. The best 10 discriminating image features were then found with a genetic algorithm. Using the best 10 image features, simple linear discriminant analysis models produced 100% correct classifications for both pork and turkey on both calibration and validation sets. 2009 Elsevier Ltd. All rights reserved.
Insect succession on remains of human and animals in Shenzhen, China.
Wang, Yu; Ma, Meng-Yun; Jiang, Xin-Yu; Wang, Jiang-Feng; Li, Liang-Liang; Yin, Xiao-Jun; Wang, Min; Lai, Yue; Tao, Lu-Yang
2017-02-01
Most forensic entomological succession studies have been carried out using pig or rabbit carcasses; however, there have been few studies on the differences between insect succession patterns on human cadavers and on animal carcasses. In order to clarify the differences between decomposition and insect succession patterns of human cadavers and animal carcasses, one 49.5kg human cadaver, two large pig carcasses (45 and 48kg), two small pig carcasses (23 and 25kg) and two rabbit carcasses (both 1.75kg) were placed in the same field conditions in Shenzhen, China for a comparative study on August, 2013. The results indicated that: (1) The duration from fresh to skeletonization is in order of human cadaver>large pig carcasses>small pig carcasses>rabbit carcasses; (2) insect assemblages (including developmental stages) are more complex on larger carcasses, in order of human cadaver=large pig carcasses>small pig carcasses>rabbit carcasses; (3) the developmental rates of the same forensically important fly species on all carcasses are consistent; (4) all identified species of Calliphoridae can complete development of one generation on human cadaver, and both large and small pig carcasses, while on rabbit carcasses, only a subset of the Calliphoridae species can finish development of one generation; (5) beetles can generate offspring on human cadaver, and both large and small pig carcasses, while they do not generate offspring on rabbit carcasses. This study provides useful comparative data for decomposition and insect succession pattern of human cadaver with animal carcasses. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.
Algino, R J; Badtram, G A; Ingham, B H; Ingham, S C
2009-04-01
The U.S. Department of Agriculture has expressed concern over Salmonella prevalence on pork carcasses. Our objectives were to survey the prevalence of Salmonella on pork carcasses in very small Wisconsin abattoirs, and identify processing conditions and indicator bacteria levels associated with reduced Salmonella prevalence. During April to July 2007, sponge samples were obtained from 181 pork carcasses at 10 Wisconsin abattoirs before carcass washing (carcass half A), and after washing and chilling and before fabrication (carcass half B). Each sample was categorized by whether the carcass was skinned, by wash-water temperature (7 to 43 degrees C), and the duration (1 or 2 days), temperature, and percent relative humidity of chilling. Sponge samples were analyzed qualitatively for Salmonella and quantitatively for Escherichia coli, coliforms, Enterobacteriaceae, and aerobic plate count (APC). Salmonella prevalences on skinned and unskinned prewash carcasses were 11.7 and 8.3%, respectively. Corresponding values for chilled carcasses were 32.0 and 19.5% for 1-day chilled carcasses, and 11.4 and 14.7% for 2-day chilled carcasses. Lower Salmonella prevalence on prewash carcasses was significantly related to lower prewash carcass APC levels (odds ratio = 7.8 per change of 1.0 log CFU/cm2), while lower Salmonella prevalence on chilled carcasses was significantly related to 2-day chilling (odds ratio = 5.2), and chilled-carcass levels of coliforms, Enterobacteriaceae, and APC (odds ratio = 1.5 to 1.9 per change of 1.0 log CFU/cm2). Salmonella prevalence on chilled pork carcasses in very small Wisconsin plants could be reduced by chilling carcasses 2 days before fabrication and improving carcass-handling hygiene.
The detection and recovery of Erysipelothrix spp. in meat and abattoir samples in Western Australia.
Wang, Q; Fidalgo, S; Chang, B J; Mee, B J; Riley, T V
2002-01-01
To investigate the occurrence of Erysipelothrix rhusiopathiae and other Erysipelothrix spp. in abattoir and meat samples in Western Australia. Samples were collected from various parts of pig and sheep carcasses, as well as different sections of slaughtering line, pen soil and effluent. Previously evaluated culture methods were applied for the isolation of Erysipelothrix spp., in conjunction with phenotypic and genotypic detection and identification procedures. Of 109 samples from the two abattoirs, 35 (32.1%) were Erysipelothrix genus-specific PCR-positive. These came from swabs of animal exterior surfaces and joints, slaughtering areas, pig pen soil and abattoir effluent. Four samples (3.7%) from sheep arthritic joints and pig abattoir effluent were also E. rhusiopathiae species-specific PCR-positive. Of 123 carcass washing samples, 12 (9.8%) were genus-specific PCR-positive, and these came from all five kinds of meat samples tested, including beef, lamb, mutton, pork and chicken. Four of them (3.3%) were also species-specific PCR-positive. A total of 25 isolates was recovered from the samples, of which seven were identified as E. rhusiopathiae, seven were consistent with E. tonsillarum, and the remaining 11 were other species of Erysipelothrix. Erysipelothrix spp. can still be isolated and identified from specimens of animal origin with relative ease, provided that appropriate cultural and molecular procedures are used. Clinical microbiology laboratories may need to improve their diagnostic protocols. This study confirms that E. rhusiopathiae and other species of Erysipelothrix continue to colonize and contaminate farmed animals and animal products. Erysipelothrix infection still poses a potential threat to the economy of the farmed animal industry, as well as being a potential human public health hazard.
Code of Federal Regulations, 2011 CFR
2011-01-01
... carcasses, and eggs (other than hatching eggs) of poultry, game birds, or other birds; importations from... § 94.6 Carcasses, parts or products of carcasses, and eggs (other than hatching eggs) of poultry, game... considered to exist. Carcasses, and parts or products of carcasses, of poultry, game birds, or other birds...
Code of Federal Regulations, 2010 CFR
2010-01-01
... carcasses, and eggs (other than hatching eggs) of poultry, game birds, or other birds; importations from... § 94.6 Carcasses, parts or products of carcasses, and eggs (other than hatching eggs) of poultry, game... considered to exist. Carcasses, and parts or products of carcasses, of poultry, game birds, or other birds...
Effect of body mass and clothing on decomposition of pig carcasses.
Matuszewski, Szymon; Konwerski, Szymon; Frątczak, Katarzyna; Szafałowicz, Michał
2014-11-01
Carcass mass and carcass clothing are factors of potential high forensic importance. In casework, corpses differ in mass and kind or extent of clothing; hence, a question arises whether methods for post-mortem interval estimation should take these differences into account. Unfortunately, effects of carcass mass and clothing on specific processes in decomposition and related entomological phenomena are unclear. In this article, simultaneous effects of these factors are analysed. The experiment followed a complete factorial block design with four levels of carcass mass (small carcasses 5-15 kg, medium carcasses 15.1-30 kg, medium/large carcasses 35-50 kg, large carcasses 55-70 kg) and two levels of carcass clothing (clothed and unclothed). Pig carcasses (N = 24) were grouped into three blocks, which were separated in time. Generally, carcass mass revealed significant and frequently large effects in almost all analyses, whereas carcass clothing had only minor influence on some phenomena related to the advanced decay. Carcass mass differently affected particular gross processes in decomposition. Putrefaction was more efficient in larger carcasses, which manifested itself through earlier onset and longer duration of bloating. On the other hand, active decay was less efficient in these carcasses, with relatively low average rate, resulting in slower mass loss and later onset of advanced decay. The average rate of active decay showed a significant, logarithmic increase with an increase in carcass mass, but only in these carcasses on which active decay was driven solely by larval blowflies. If a blowfly-driven active decay was followed by active decay driven by larval Necrodes littoralis (Coleoptera: Silphidae), which was regularly found in medium/large and large carcasses, the average rate showed only a slight and insignificant increase with an increase in carcass mass. These results indicate that lower efficiency of active decay in larger carcasses is a consequence of a multi-guild and competition-related pattern of this process. Pattern of mass loss in large and medium/large carcasses was not sigmoidal, but rather exponential. The overall rate of decomposition was strongly, but not linearly, related to carcass mass. In a range of low mass decomposition rate increased with an increase in mass, then at about 30 kg, there was a distinct decrease in rate, and again at about 50 kg, the rate slightly increased. Until about 100 accumulated degree-days larger carcasses gained higher total body scores than smaller carcasses. Afterwards, the pattern was reversed; moreover, differences between classes of carcasses enlarged with the progress of decomposition. In conclusion, current results demonstrate that cadaver mass is a factor of key importance for decomposition, and as such, it should be taken into account by decomposition-related methods for post-mortem interval estimation.
Code of Federal Regulations, 2013 CFR
2013-01-01
... cooked beef, roast beef, and cooked corned beef products. 318.17 Section 318.17 Animals and Animal... production of cooked beef, roast beef, and cooked corned beef products. (a) Cooked beef, roast beef, and cooked corned beef products must be produced using processes ensuring that the products meet the...
Code of Federal Regulations, 2010 CFR
2010-01-01
... cooked beef, roast beef, and cooked corned beef products. 318.17 Section 318.17 Animals and Animal... production of cooked beef, roast beef, and cooked corned beef products. (a) Cooked beef, roast beef, and cooked corned beef products must be produced using processes ensuring that the products meet the...
Code of Federal Regulations, 2014 CFR
2014-01-01
... cooked beef, roast beef, and cooked corned beef products. 318.17 Section 318.17 Animals and Animal... production of cooked beef, roast beef, and cooked corned beef products. (a) Cooked beef, roast beef, and cooked corned beef products must be produced using processes ensuring that the products meet the...
Code of Federal Regulations, 2012 CFR
2012-01-01
... cooked beef, roast beef, and cooked corned beef products. 318.17 Section 318.17 Animals and Animal... production of cooked beef, roast beef, and cooked corned beef products. (a) Cooked beef, roast beef, and cooked corned beef products must be produced using processes ensuring that the products meet the...