A Computerized Tomography Study of Vocal Tract Setting in Hyperfunctional Dysphonia and in Belting.

PubMed

Saldias, Marcelo; Guzman, Marco; Miranda, Gonzalo; Laukkanen, Anne-Maria

2018-04-03

Vocal tract setting in hyperfunctional patients is characterized by a high larynx and narrowing of the epilaryngeal and pharyngeal region. Similar observations have been made for various singing styles, eg, belting. The voice quality in belting has been described to be loud, speech like, and high pitched. It is also often described as sounding "pressed" or "tense". The above mentioned has led to the hypothesis that belting may be strenuous to the vocal folds. However, singers and teachers of belting do not regard belting as particularly strenuous. This study investigates possible similarities and differences between hyperfunctional voice production and belting. This study concerns vocal tract setting. Four male patients with hyperfunctional dysphonia and one male contemporary commercial music singer were registered with computerized tomography while phonating on [a:] in their habitual speaking pitch. Additionally, the singer used the pitch G4 in belting. The scannings were studied in sagittal and transversal dimensions by measuring lengths, widths, and areas. Various similarities were found between belting and hyperfunction: high vertical larynx position, small hypopharyngeal width, and epilaryngeal outlet. On the other hand, belting differed from dysphonia (in addition to higher pitch) by a wider lip and jaw opening, and larger volumes of the oral cavity. Belting takes advantage of "megaphone shape" of the vocal tract. Future studies should focus on modeling and simulation to address sound energy transfer. Also, they should consider aerodynamic variables and vocal fold vibration to evaluate the "price of decibels" in these phonation types. Copyright © 2018. Published by Elsevier Inc.

Extensional tectonics during the igneous emplacement of the mafic-ultramafic rocks of the Barberton greenstone belt

NASA Technical Reports Server (NTRS)

Dewit, M. J.

1986-01-01

The simatic rocks (Onverwacht Group) of the Barberton greenstone belt are part of the Jamestown ophiolite complex. This ophiolite, together with its thick sedimentary cover occupies a complex thrust belt. Field studies have identified two types of early faults which are entirely confined to the simatic rocks and are deformed by the later thrusts and associated folds. The first type of fault (F1a) is regional and always occurs in the simatic rocks along and parallel to the lower contacts of the ophiolite-related cherts (Middle Marker and equivalent layers). These fault zones have previously been referred to both as flaser-banded gneisses and as weathering horizons. In general the zones range between 1-30m in thickness. Displacements along these zones are difficult to estimate, but may be in the order of 1-100 km. The structures indicate that the faults formed close to horizontal, during extensional shear and were therefore low angle normal faults. F1a zones overlap in age with the formation of the ophiolite complex. The second type of faults (F1b) are vertical brittle-ductile shear zones, which crosscut the complex at variable angles and cannot always be traced from plutonic to overlying extrusive (pillowed) simatic rocks. F1b zones are also apparently of penecontemporaneous origin with the intrusive-extrusive igneous processs. F1b zones may either represent transform fault-type activity or represent root zones (steepened extensions) of F1a zones. Both fault types indicate extensive deformation in the rocks of the greenstone belt prior to compressional overthrust tectonics.

VizieR Online Data Catalog: Spectroscopy of main-belt Ch/Cgh-type asteroids (Vernazza+, 2016)

NASA Astrophysics Data System (ADS)

Vernazza, P.; Marsset, M.; Beck, P.; Binzel, R. P.; Birlan, M.; Cloutis, E. A.; DeMeo, F. E.; Dumas, C.; Hiroi, T.

2016-09-01

We conducted an extensive spectroscopic survey in the near-infrared range of 70 main-belt Ch/Cgh-type asteroids and 4 Ch/Cgh-type families and combined these measurements with available visible wavelength spectra. New data presented here are near-infrared asteroid spectral measurements for Ch- and Cgh-type asteroids from 0.7-2.5μm obtained using SpeX, the low- to medium-resolution near-IR spectrograph and imager on the 3m NASA InfraRed Telescope Facility (IRTF) located on Mauna Kea, HI. Observing runs were conducted remotely primarily from the Observatory of Paris-Meudon, France between 2010 April and 2012 January. The spectrograph SpeX, combined with a 0.8*15arcsec slit, was used in the low-resolution prism mode for acquisition of the spectra in the 0.7-2.5μm wavelength range. In order to monitor the high luminosity and variability of the sky in the near-IR, the telescope was moved along the slit during the acquisition of the data so as to obtain a sequence of spectra located at two different positions (A and B) on the array. In addition, we complemented our data set with additional near-infrared spectra retrieved from the Small Main-Belt Asteroid Spectroscopic Survey (SMASS) database (http://smass.mit.edu/). Combining these near-infrared measurements with available visible wavelength spectra (Bus, 1999PhDT........50B; Lazzaro et al., 2004Icar..172..179L) allows for the first time an extensive visible and near-infrared (VNIR) spectral database of main-belt Ch and Cgh types with D>45km (78% or 49/63 of all Ch and Cgh types listed in SMASS; see Table1). (1 data file).

Evaluation of Criteria for the Detection of Fires in Underground Conveyor Belt Haulageways.

PubMed

Litton, Charles D; Perera, Inoka Eranda

2012-07-01

Large-scale experiments were conducted in an above-ground gallery to simulate typical fires that develop along conveyor belt transport systems within underground coal mines. In the experiments, electrical strip heaters, imbedded ~5 cm below the top surface of a large mass of coal rubble, were used to ignite the coal, producing an open flame. The flaming coal mass subsequently ignited 1.83-meter-wide conveyor belts located approximately 0.30 m above the coal surface. Gas samples were drawn through an averaging probe located approximately 20 m downstream of the coal for continuous measurement of CO, CO 2 , and O 2 as the fire progressed through the stages of smoldering coal, flaming coal, and flaming conveyor belt. Also located approximately 20 m from the fire origin and approximately 0.5 m below the roof of the gallery were two commercially available smoke detectors, a light obscuration meter, and a sampling probe for measurement of total mass concentration of smoke particles. Located upstream of the fire origin and also along the wall of the gallery at approximately 14 m and 5 m upstream were two video cameras capable of both smoke and flame detection. During the experiments, alarm times of the smoke detectors and video cameras were measured while the smoke obscuration and total smoke mass were continually measured. Twelve large-scale experiments were conducted using three different types of fire-resistant conveyor belts and four air velocities for each belt. The air velocities spanned the range from 1.0 m/s to 6.9 m/s. The results of these experiments are compared to previous large-scale results obtained using a smaller fire gallery and much narrower (1.07-m) conveyor belts to determine if the fire detection criteria previously developed (1) remained valid for the wider conveyor belts. Although some differences between these and the previous experiments did occur, the results, in general, compare very favorably. Differences are duly noted and their impact on fire detection discussed.

Cleaning of conveyor belt materials using ultrasound in a thin layer of water.

PubMed

Axelsson, L; Holck, A; Rud, I; Samah, D; Tierce, P; Favre, M; Kure, C F

2013-08-01

Cleaning of conveyor belts in the food industry is imperative for preventing the buildup of microorganisms that can contaminate food. New technologies for decreasing water and energy consumption of cleaning systems are desired. Ultrasound can be used for cleaning a wide range of materials. Most commonly, baths containing fairly large amounts of water are used. One possibility to reduce water consumption is to use ultrasonic cavitation in a thin water film on a flat surface, like a conveyor belt. In order to test this possibility, a model system was set up, consisting of an ultrasound transducer/probe with a 70-mm-diameter flat bottom, operating at 19.8 kHz, and contaminated conveyor belt materials in the form of coupons covered with a thin layer of water or water with detergent. Ultrasound was then applied on the water surface at different power levels (from 46 to 260 W), exposure times (10 and 20 s), and distances (2 to 20 mm). The model was used to test two different belt materials with various contamination types, such as biofilms formed by bacteria in carbohydrate- or protein-fat-based soils, dried microorganisms (bacteria, yeasts, and mold spores), and allergens. Ultrasound treatment increased the reduction of bacteria and yeast by 1 to 2 log CFU under the most favorable conditions compared with water or water-detergent controls. The effect was dependent on the type of belt material, the power applied, the exposure time, and the distance between the probe and the belt coupon. Generally, dried microorganisms were more easily removed than biofilms. The effect on mold spores was variable and appeared to be species and material dependent. Spiked allergens were also efficiently removed by using ultrasound. The results in this study pave the way for new cleaning designs for flat conveyor belts, with possibilities for savings of water, detergent, and energy consumption.

The empty primordial asteroid belt.

PubMed

Raymond, Sean N; Izidoro, Andre

2017-09-01

The asteroid belt contains less than a thousandth of Earth's mass and is radially segregated, with S-types dominating the inner belt and C-types the outer belt. It is generally assumed that the belt formed with far more mass and was later strongly depleted. We show that the present-day asteroid belt is consistent with having formed empty, without any planetesimals between Mars and Jupiter's present-day orbits. This is consistent with models in which drifting dust is concentrated into an isolated annulus of terrestrial planetesimals. Gravitational scattering during terrestrial planet formation causes radial spreading, transporting planetesimals from inside 1 to 1.5 astronomical units out to the belt. Several times the total current mass in S-types is implanted, with a preference for the inner main belt. C-types are implanted from the outside, as the giant planets' gas accretion destabilizes nearby planetesimals and injects a fraction into the asteroid belt, preferentially in the outer main belt. These implantation mechanisms are simple by-products of terrestrial and giant planet formation. The asteroid belt may thus represent a repository for planetary leftovers that accreted across the solar system but not in the belt itself.

The empty primordial asteroid belt

PubMed Central

Raymond, Sean N.; Izidoro, Andre

2017-01-01

The asteroid belt contains less than a thousandth of Earth’s mass and is radially segregated, with S-types dominating the inner belt and C-types the outer belt. It is generally assumed that the belt formed with far more mass and was later strongly depleted. We show that the present-day asteroid belt is consistent with having formed empty, without any planetesimals between Mars and Jupiter’s present-day orbits. This is consistent with models in which drifting dust is concentrated into an isolated annulus of terrestrial planetesimals. Gravitational scattering during terrestrial planet formation causes radial spreading, transporting planetesimals from inside 1 to 1.5 astronomical units out to the belt. Several times the total current mass in S-types is implanted, with a preference for the inner main belt. C-types are implanted from the outside, as the giant planets’ gas accretion destabilizes nearby planetesimals and injects a fraction into the asteroid belt, preferentially in the outer main belt. These implantation mechanisms are simple by-products of terrestrial and giant planet formation. The asteroid belt may thus represent a repository for planetary leftovers that accreted across the solar system but not in the belt itself. PMID:28924609

Carboniferous continental arc in the Hegenshan accretionary belt: Constrains from plutonic complex in central Inner Mongolia

NASA Astrophysics Data System (ADS)

Wei, Ruihua; Gao, Yongfeng; Xu, Shengchuan; Santosh, M.; Xin, Houtian; Zhang, Zhenmin; Li, Weilong; Liu, Yafang

2018-05-01

The architecture and tectonic evolution of the Hegenshan accretionary belt in the Central Asian Orogenic Belt (CAOB) remains debated. Here we present an integrated study of zircon U-Pb isotopic ages, whole rock major-trace elements, and Sr-Nd-Pb isotopic data from the Hegenshan volcanic-plutonic belt in central Inner Mongolia. Field observations and zircon U-Pb ages allow us to divide the intrusive complex into an early phase at 329-306 Ma and a late phase at 304 to 299 Ma. The intrusive bodies belong to two magma series: calc-alkaline rocks with I-type affinity and A-type granites. The early intrusions are composed of granodiorite, monzogranite and porphyritic granite, and the late calc-alkaline intrusions include gabbro though diorite to granodiorite. The calc-alkaline intrusive rocks exhibit a well-defined compositional trend from gabbro to granite, reflecting continuous fractional crystallization. These rocks show obvious enrichment in LILEs and LREEs and relative depletion of HFSEs, typical of subduction-related magma. They also exhibit isotopic characteristics of mantle-derived magmas such as low initial 87Sr/86Sr (0.7029-0.7053), positive ɛNd(t) values (0.06-4.76) and low radiogenic Pb isotopic compositions ((206Pb/204Pb)I = 17.907-19.198, (207Pb/204Pb)I = 15.474-15.555, (208Pb/204Pb)I = 37.408-38.893). The marked consistency in geochemical and isotopic compositions between the intrusive rocks and the coeval Baoligaomiao volcanic rocks define a Carboniferous continental arc. Together with available regional data, we infer that this east-west trending continental arc was generated by northward subduction of the Hegenshan ocean during Carboniferous. The late alkali-feldspar granites and the high-Si rhyolites of the Baoligaomiao volcanic succession show similar geochemical compositions with high SiO2 and variable total alkali contents, and low TiO2, MgO and CaO. These rocks are characterized by unusually low Sr and Ba, and high abundances of Zr, Th, Nb, HREEs and Y, comparable to the features of typical A2-type granites including their high ratios of FeOT/MgO, Ga/Al and Y/Nb. Our study suggests that the A-type granite was derived from a distinct magma source rather than through fractional crystallization of the coeval calc-alkaline magmas. Their Nd-Pb isotopic compositions are similar to those of calc-alkaline arc rocks and are compatible with partial melting of pre-existing juvenile basaltic crust in the continental arc. Notably, the widespread eruptions of A2-type rhyolitic magmas (305.3 Ma-303.4 Ma) following a short period of magmatic quiescence was temporally and spatially associated with bimodal magmatism with mantle-derived gabbro-diorites and A-type granites (304.3 Ma-299.03 Ma) in the pre-existing arc volcanic-plutonic belt (329 Ma-306 Ma). Such a marked change in the magma affinity likely indicates subducted slab break-off resulting in a change of the regional stress field to an extensional setting within the Carboniferous continental arc that runs E-W for few thousands of kilometers. Thus, the onset of the late magmatism (305-299 Ma) likely represents the maximum age for the cessation of the northward subduction in the Hegenshan ophiolite-arc-accretion belt.

Strategies to increase seat belt use : an analysis of levels of fines and the type of law.

DOT National Transportation Integrated Search

2010-11-01

The main objectives of this study were to determine the relationships between seat belt use in the States and (1) the : type of seat belt law enforcement (primary versus secondary), and (2) seat belt fine levels. : The study examined law type and lev...

Biomechanics of 4-point seat belt systems in frontal impacts.

PubMed

Rouhana, Stephen W; Bedewi, Paul G; Kankanala, Sundeep V; Prasad, Priya; Zwolinski, Joseph J; Meduvsky, Alex G; Rupp, Jonathan D; Jeffreys, Thomas A; Schneider, Lawrence W

2003-01-01

The biomechanical behavior of 4-point seat belt systems was investigated through MADYMO modeling, dummy tests and post mortem human subject tests. This study was conducted to assess the effect of 4-point seat belts on the risk of thoracic injury in frontal impacts, to evaluate the ability to prevent submarining under the lap belt using 4-point seat belts, and to examine whether 4-point belts may induce injuries not typically observed with 3-point seat belts. The performance of two types of 4-point seat belts was compared with that of a pretensioned, load-limited, 3-point seat belt. A 3-point belt with an extra shoulder belt that "crisscrossed" the chest (X4) appeared to add constraint to the torso and increased chest deflection and injury risk. Harness style shoulder belts (V4) loaded the body in a different biomechanical manner than 3-point and X4 belts. The V4 belt appeared to shift load to the clavicles and pelvis and to reduce traction of the shoulder belt across the chest, resulting in a reduction in chest deflection by a factor of two. This is associated with a 5 to 500-fold reduction in thoracic injury risk, depending on whether one assumes 4-point belts apply concentrated or distributed load. In four of six post mortem human subjects restrained by V4 belts during 40 km/h sled tests, chest compression was zero or negative and rib fractures were nearly eliminated. Submarining was not observed in any test with post mortem human subjects. Though lumbar, sacral and pelvic injuries were noted, they are believed to be due to the artificial restraint environment (no knee bolsters, instrument panels, steering systems or airbags). While they show significant potential to reduce thoracic injury risk, there are still many issues to be resolved before 4-point belts can be considered for production vehicles. These issues include, among others, potential effects on hard and soft neck tissues, of interaction with inboard shoulder belts in farside impacts and potential effects on the fetus of latch/buckle junctions at the centerline of pregnant occupants. Work continues at Ford Motor Company to resolve these issues.

Comparing the response of birds and butterflies to vegetation-based mountain ecotones using boundary detection approaches.

PubMed

Kent, Rafi; Levanoni, Oded; Banker, Eran; Pe'er, Guy; Kark, Salit

2013-01-01

Mountains provide an opportunity to examine changes in biodiversity across environmental gradients and areas of transition (ecotones). Mountain ecotones separate vegetation belts. Here, we aimed to examine whether transition areas for birds and butterflies spatially correspond with ecotones between three previously described altitudinal vegetation belts on Mt. Hermon, northern Israel. These include the Mediterranean Maquis, xero-montane open forest and Tragacanthic mountain steppe vegetation belts. We sampled the abundance of bird and butterfly species in 34 sampling locations along an elevational gradient between 500 and 2200 m. We applied wombling, a boundary-detection technique, which detects rapid changes in a continuous variable, in order to locate the transition areas for bird and butterfly communities and compare the location of these areas with the location of vegetation belts as described in earlier studies of Mt. Hermon. We found some correspondence between the areas of transition of both bird and butterfly communities and the ecotones between vegetation belts. For birds and butterflies, important transitions occurred at the lower vegetation ecotone between Mediterranean maquis and the xero-montane open forest vegetation belts, and between the xero-montane open forest and the mountain steppe Tragacanthic belts. While patterns of species turnover with elevation were similar for birds and butterflies, the change in species richness and diversity with elevation differed substantially between the two taxa. Birds and butterflies responded quite similarly to the elevational gradient and to the shift between vegetation belts in terms of species turnover rates. While the mechanisms generating these patterns may differ, the resulting areas of peak turnover in species show correspondence among three different taxa (plants, birds and butterflies).

Study on the application of permanent magnet synchronous motors in underground belt conveyors

NASA Astrophysics Data System (ADS)

Ma, S. H.

2017-12-01

This paper analyzes and compares the advantages and disadvantages of several kinds of drive devices of belt conveyors from the angle of energy saving, and summarizes the application advantages and using problems of permanent magnet motor variable frequency drive system in belt conveyors. An example is given to demonstrate the energy saving effect of this system compared with other driving methods. This paper points out the application prospect of permanent magnet motor variable frequency drive system on belt conveyors and other large mining machines in coal mine. This paper is aimed to provide the design direction for the designer and the choice basis for the user on belt conveyor.

The Association of Statin Use and Statin Type on Cognitive Performance: Analysis of The REasons for Geographic And Racial Differences in Stroke (REGARDS) Study

PubMed Central

Glasser, Stephen P; Wadley, Virginia; Judd, Suzanne; Kana, Bhumika; Prince, Valerie; Jenny, Nancy Swords; Kissela, Brett; Safford, Monika; Prineas, Ronald; Howard, George

2010-01-01

SUMMARY Context Statin use and type has been variably associated with impaired or improved cognitive performance. Objective To assess the association of statin use and type (lipophilic vs hydrophilic) and cognitive impairment Design Cross-sectional analysis of 24595 (7191 statin users and 17404 non-users) participants (age >45), from a population-based national cohort study (REasons for Geographic And Racial Differences in Stroke) enrolled from January 2003-October 2008 with over-sampling from the southeastern Stroke Belt, and African Americans. Main Outcomes Statin use and type were documented in participants’ homes by a trained health professional. Cognitive performance was assessed with a prior validated instrument of global cognitive status (Six-Item Screener). Cognitive impairment was defined as a score of < 4. . Results Overall, an association of cognitive impairment and statin use was observed (8.6% of users vs 7.7% or non-users had cognitive impairment p=.014) but, after adjusting for variables known to be associated with cognition (age, gender, race, income, levels of education, and cardiovascular disease) the association was attenuated (OR 0.98, CI; 0.87;1.10). No association was observed between statin type (lipophilic vs hydrophilic) and cognition (OR 1.03, CI; 0.86;1.24), and there were no regional differences in cognitive impairment in statin users (8% in the stroke belt and 7.9% other regions p=0.63). Conclusions Statin use and type was marginally associated with cognitive impairment. After adjusting for known variables that affect cognition, no association was observed. No regional differences were observed. This large study found no evidence to support an association between statins and cognitive performance. PMID:20513066

Global epidemiology of capsular group W meningococcal disease (1970-2015): Multifocal emergence and persistence of hypervirulent sequence type (ST)-11 clonal complex.

PubMed

Mustapha, Mustapha M; Marsh, Jane W; Harrison, Lee H

2016-03-18

Following an outbreak in Mecca Saudi Arabia in 2000, meningococcal strains expressing capsular group W (W) emerged as a major cause of invasive meningococcal disease (IMD) worldwide. The Saudi Arabian outbreak strain (Hajj clone) belonging to the ST-11 clonal complex (cc11) is similar to W cc11 causing occasional sporadic disease before 2000. Since 2000, W cc11 has caused large meningococcal disease epidemics in the African meningitis belt and endemic disease in South America, Europe and China. Traditional molecular epidemiologic typing suggested that a majority of current W cc11 burden represented global spread of the Hajj clone. However, recent whole genome sequencing (WGS) analyses revealed significant genetic heterogeneity among global W cc11 strains. While continued spread of the Hajj clone occurs in the Middle East, the meningitis belt and South Africa have co-circulation of the Hajj clone and other unrelated W cc11 strains. Notably, South America, the UK, and France share a genetically distinct W cc11 strain. Other W lineages persist in low numbers in Europe, North America and the meningitis belt. In summary, WGS is helping to unravel the complex genomic epidemiology of group W meningococcal strains. Wider application of WGS and strengthening of global IMD surveillance is necessary to monitor the continued evolution of group W lineages. Copyright © 2016 Elsevier Ltd. All rights reserved.

Analysis of factors associated with traffic injury severity on rural roads in Iran.

PubMed

Kashani, Ali Tavakoli; Shariat-Mohaymany, Afshin; Ranjbari, Andishe

2012-01-01

Iran is a country with one of the highest rates of traffic crash fatality and injury, and seventy percent of these fatalities happen on rural roads. The objective of this study is to identify the significant factors influencing injury severity among drivers involved in crashes on two kinds of major rural roads in Iran: two-lane, two-way roads and freeways. According to the dataset, 213569 drivers were involved in rural road crashes in Iran, over the 3 years from 2006 to 2008. The Classification And Regression Tree method (CART) was applied for 13 independent variables, and one target variable of injury severity with 3 classes of no-injury, injury and fatality. Some of the independent variables were cause of crash, collision type, weather conditions, road surface conditions, driver's age and gender and seat belt usage. The CART model was trained by 70% of these data, and tested with the rest. It was indicated that seat belt use is the most important safety factor for two-lane, two-way rural roads, but on freeways, the importance of this variable is less. Cause of crash, also turned out to be the next most important variable. The results showed that for two-lane, two-way rural roads, "improper overtaking" and "speeding", and for rural freeways, "inattention to traffic ahead", "vehicle defect", and "movement of pedestrians, livestock and unauthorized vehicles on freeways" are the most serious causes of increasing injury severity. The analysis results revealed seat belt use, cause of crash and collision type as the most important variables influencing the injury severity of traffic crashes. To deal with these problems, intensifying police enforcement by means of mobile patrol vehicles, constructing overtaking lanes where necessary, and prohibiting the crossing of pedestrians and livestock and the driving of unauthorized vehicles on freeways are necessary. Moreover, creating a rumble strip on the two edges of roads, and paying attention to the design consistency of roads can be a helpful factor in order to prevent events such as "overturning" and improve the overall safety of freeways.

Using naturalistic driving data to identify variables associated with infrequent, occasional, and consistent seat belt use.

PubMed

Reagan, Ian J; McClafferty, Julie A; Berlin, Sharon P; Hankey, Jonathan M

2013-01-01

Seat belt use is one of the most effective countermeasures to reduce traffic fatalities and injuries. The success of efforts to increase use is measured by road side observations and self-report questionnaires. These methods have shortcomings, with the former requiring a binary point estimate and the latter being subjective. The 100-car naturalistic driving study presented a unique opportunity to study seat belt use in that seat belt status was known for every trip each driver made during a 12-month period. Drivers were grouped into infrequent, occasional, or consistent seat belt users based on the frequency of belt use. Analyses were then completed to assess if these groups differed on several measures including personality, demographics, self-reported driving style variables as well as measures from the 100-car study instrumentation suite (average trip speed, trips per day). In addition, detailed analyses of the occasional belt user group were completed to identify factors that were predictive of occasional belt users wearing their belts. The analyses indicated that consistent seat belt users took fewer trips per day, and that increased average trip speed was associated with increased belt use among occasional belt users. The results of this project may help focus messaging efforts to convert occasional and inconsistent seat belt users to consistent users. Copyright © 2012 Elsevier Ltd. All rights reserved.

Belt separation system under slat in fattening pig housing: effect of belt type and extraction frequency.

PubMed

Alonso, F; Vázquez, J; Ovejero, I; Garcimartín, M A; Mateos, A; Sánchez, E

2010-08-01

The efficiency of manure separation by a conveyor belt under a partially slatted floor for fattening pigs was determined for two types of belts, a flat belt with an incline of up to 6 degrees transversely and a concave belt with an incline of up to 1 degrees longitudinally. A 31.20% and 23.75% dry matter content of the solid fraction was obtained for the flat and concave belt, respectively. The flat belt was more efficient at 6 degrees than other slope angles. The residence time of the manure on the two belt types influenced the separation efficiency from a live weight of 63.00 kg upwards. The quantity of residue produced with this system was reduced to 25-40% with respect to a pit system under slat. This could mean a remarkable reduction in costs of storage, transport and application of manure. (c) 2010 Elsevier Ltd. All rights reserved.

2003 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2003-08-01

The objective of this study was to establish 2003 safety belt and child safety seat usage rates in Kentucky. The 2003 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994 and safety belt enforcemen...

2004 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2004-08-01

The objective of this study was to establish 2004 safety belt and child safety seat usage rates in Kentucky. The 2004 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994 and safety belt enforcemen...

Spinifex-textured komatiites in the south border of the Carajas ridge, Selva Greenstone belt, Carajás Province, Brazil

NASA Astrophysics Data System (ADS)

Siepierski, Lincoln; Ferreira Filho, Cesar Fonseca

2016-03-01

Spinifex-textured komatiites in the Selva greenstone belt are the first unequivocal examples of komatiites in the Transition Subdomain of the Carajás Mineral Province. Outcrops of spinifex-textured komatiites, located ∼1.5 km to the south of the Carajás ridge, were discovered during regional exploration for Ni-Cu-(PGE) sulfide deposits by VALE. They are associated with a 3.8 km long unit consisting of variable types of ultramafic rocks (talc schist, serpentinite and spinifex-textured komatiite). This ultramafic unit follows the steep dipping NW-SE trending Selva greenstone belt composed mainly by quartz-chlorite schists (interpreted as metasediments) and chlorite-actinolite schists (interpreted as metabasalts). Greenschist facies metamorphic parageneses characterize all rock types in the Selva greenstone belt. The komatiitic rocks in the Selva belt comprise a sequence of flows consisting of an upper spinifex-textured layer and a lower olivine cumulate layer. Although the spinifex and cumulus textures are well preserved in the field, the primary mineralogy of the komatiites has been completely replaced by greenschist facies metamorphic minerals. Platy olivine spinifex texture, consisting of an array of roughly parallel olivine plates, and random spinifex texture, consisting of randomly oriented olivine plates, are the most common primary volcanic textures in komatiites in the Selva greenstone belt. Platy and random spinifex texture is defined by former plates of olivine replaced by serpentine with minor actinolite, chlorite and magnetite, alternating with former matrix replaced by abundant actinolite and minor chlorite, talc, serpentine, and magnetite. The domains between olivine plates in both platy and random spinifex-textured rocks contain irregular arrays of fine-grained parallel crystals, representing primary fine-grained "quench" clinopyroxene crystals replaced by actinolite. Spinifex-textured komatiites have MgO contents bracket between 22.8 and 26.9 wt.%, and cumulate textured komatiites have MgO contents up to 40.6 wt.%. When plotted vs MgO contents, most major and minor elements fall on well-defined linear trends indicating control by olivine fractionation or accumulation. Komatiites from the Selva and Seringa (located in the Rio Maria Domain) belts are Al-undepleted with Al2O3/TiO2 ratios close to 20. Results for CaO, Na2O, and REE suggest that these elements were mobile and their abundances have been modified during metasomatic alteration. REE contents in some samples are very high (up to 40 times primitive mantle values) and REE patterns vary from flat (La/YbMN ∼ 1) to highly enriched in LREE (La/YbMN up to ∼ 10). The REE mobility may be related to hydrothermal alteration associated to Cu-Au mineralization in the region. The identification of spinifex-textured komatiites close to the Carajás Basin suggests the continuation of 3.0-2.9 Ga greenstone belts of the Rio Maria Domain within the Transition Subdomain, and enlarges the area with potential to host komatiite-associated Ni-Cu-PGE deposits.

Stacking and metamorphism of continuous segments of subducted lithosphere in a high-pressure wedge: The example of Alpine Corsica (France)

NASA Astrophysics Data System (ADS)

Vitale Brovarone, Alberto; Beyssac, Olivier; Malavieille, Jacques; Molli, Giancarlo; Beltrando, Marco; Compagnoni, Roberto

2013-01-01

Alpine Corsica consists of a stack of variably metamorphosed units of continental and Tethys-derived rocks. It represents an excellent example of high-pressure (HP) orogenic belt, such as the Western Alps, exposed over a small and accessible area. Compared to the Western Alps, the geology of Alpine Corsica is poorly unraveled. During the 1970s-80s, based on either lithostratigraphic or metamorphic field observations, various classifications of the belt have been proposed, but these classifications have been rarely matched together. Furthermore, through time, the internal complexity of large domains has been progressively left aside in the frame of large-scale geodynamic reconstructions. As a consequence, major open questions on the internal structure of the belt have remained unsolved. Apart from a few local studies, Alpine Corsica has not benefited of modern developments in petrology and basin research. This feature results in several uncertainties when combining lithostratigraphic and metamorphic patterns and, consequently, in the definition of an exhaustive architecture of the belt. In this paper we provide a review on the geology of Alpine Corsica, paying particular attention to the available lithostratigraphic and metamorphic classifications of the metamorphic terranes. These data are completed by a new and exhaustive metamorphic dataset obtained by means of thermometry based on Raman Spectroscopy of Carbonaceous Material (RSCM). This technique provides reliable insights on the peak temperature of the metamorphic history for CM-bearing metasediments. A detailed metamorphic characterization of metasediments, which have been previously largely ignored due to retrogression or to the lack of diagnostic mineralogy, is thus obtained and fruitfully coupled with the available lithostratigraphic data. Nine main tectono-metamorphic units are defined, from subgreenschist (ca. 280-300 °C) to the lawsonite-eclogite-facies (ca. 500-550 °C) condition. These units are homogeneous in metamorphism, laterally continuous and have characteristic lithostratigraphic features. This study also suggests a direct link between the pre-orogenic extensional setting and the present-day compressional structure of Alpine Corsica, indicating that large sections of subducted lithosphere were subducted and exhumed as coherent domains. These features provide important insight on the mechanism of stacking and exhumation of HP rocks, and make Alpine Corsica a unique reference for mountain-building processes in Tethyan-type orogens.

Evaluation of Criteria for the Detection of Fires in Underground Conveyor Belt Haulageways

PubMed Central

Litton, Charles D.; Perera, Inoka Eranda

2015-01-01

Large-scale experiments were conducted in an above-ground gallery to simulate typical fires that develop along conveyor belt transport systems within underground coal mines. In the experiments, electrical strip heaters, imbedded ~5 cm below the top surface of a large mass of coal rubble, were used to ignite the coal, producing an open flame. The flaming coal mass subsequently ignited 1.83-meter-wide conveyor belts located approximately 0.30 m above the coal surface. Gas samples were drawn through an averaging probe located approximately 20 m downstream of the coal for continuous measurement of CO, CO2, and O2 as the fire progressed through the stages of smoldering coal, flaming coal, and flaming conveyor belt. Also located approximately 20 m from the fire origin and approximately 0.5 m below the roof of the gallery were two commercially available smoke detectors, a light obscuration meter, and a sampling probe for measurement of total mass concentration of smoke particles. Located upstream of the fire origin and also along the wall of the gallery at approximately 14 m and 5 m upstream were two video cameras capable of both smoke and flame detection. During the experiments, alarm times of the smoke detectors and video cameras were measured while the smoke obscuration and total smoke mass were continually measured. Twelve large-scale experiments were conducted using three different types of fire-resistant conveyor belts and four air velocities for each belt. The air velocities spanned the range from 1.0 m/s to 6.9 m/s. The results of these experiments are compared to previous large-scale results obtained using a smaller fire gallery and much narrower (1.07-m) conveyor belts to determine if the fire detection criteria previously developed (1) remained valid for the wider conveyor belts. Although some differences between these and the previous experiments did occur, the results, in general, compare very favorably. Differences are duly noted and their impact on fire detection discussed. PMID:26566298

Watershed regressions for pesticides (warp) models for predicting atrazine concentrations in Corn Belt streams

USGS Publications Warehouse

Stone, Wesley W.; Gilliom, Robert J.

2012-01-01

Watershed Regressions for Pesticides (WARP) models, previously developed for atrazine at the national scale, are improved for application to the United States (U.S.) Corn Belt region by developing region-specific models that include watershed characteristics that are influential in predicting atrazine concentration statistics within the Corn Belt. WARP models for the Corn Belt (WARP-CB) were developed for annual maximum moving-average (14-, 21-, 30-, 60-, and 90-day durations) and annual 95th-percentile atrazine concentrations in streams of the Corn Belt region. The WARP-CB models accounted for 53 to 62% of the variability in the various concentration statistics among the model-development sites. Model predictions were within a factor of 5 of the observed concentration statistic for over 90% of the model-development sites. The WARP-CB residuals and uncertainty are lower than those of the National WARP model for the same sites. Although atrazine-use intensity is the most important explanatory variable in the National WARP models, it is not a significant variable in the WARP-CB models. The WARP-CB models provide improved predictions for Corn Belt streams draining watersheds with atrazine-use intensities of 17 kg/km2 of watershed area or greater.

Cleaning conveyor belts in the chicken-cutting area of a poultry processing plant with 45°c water.

PubMed

Soares, V M; Pereira, J G; Zanette, C M; Nero, L A; Pinto, J P A N; Barcellos, V C; Bersot, L S

2014-03-01

Conveyor belts are widely used in food handling areas, especially in poultry processing plants. Because they are in direct contact with food and it is a requirement of the Brazilian health authority, conveyor belts are required to be continuously cleaned with hot water under pressure. The use of water in this procedure has been questioned based on the hypothesis that water may further disseminate microorganisms but not effectively reduce the organic material on the surface. Moreover, reducing the use of water in processing may contribute to a reduction in costs and emission of effluents. However, no consistent evidence in support of removing water during conveyor belt cleaning has been reported. Therefore, the objective of the present study was to compare the bacterial counts on conveyor belts that were or were not continuously cleaned with hot water under pressure. Superficial samples from conveyor belts (cleaned or not cleaned) were collected at three different times during operation (T1, after the preoperational cleaning [5 a.m.]; T2, after the first work shift [4 p.m.]; and T3, after the second work shift [1:30 a.m.]) in a poultry meat processing facility, and the samples were subjected to mesophilic and enterobacterial counts. For Enterobacteriaceae, no significant differences were observed between the conveyor belts, independent of the time of sampling or the cleaning process. No significant differences were observed between the counts of mesophilic bacteria at the distinct times of sampling on the conveyor belt that had not been subjected to continuous cleaning with water at 45°C. When comparing similar periods of sampling, no significant differences were observed between the mesophilic counts obtained from the conveyor belts that were or were not subjected to continuous cleaning with water at 45°C. Continuous cleaning with water did not significantly reduce microorganism counts, suggesting the possibility of discarding this procedure in chicken processing.

Belt conveyor apparatus

DOEpatents

Oakley, David J.; Bogart, Rex L.

1987-01-01

A belt conveyor apparatus according to this invention defines a conveyance path including a first pulley and at least a second pulley. An endless belt member is adapted for continuous travel about the pulleys and comprises a lower portion which engages the pulleys and an integral upper portion adapted to receive objects therein at a first location on said conveyance path and transport the objects to a second location for discharge. The upper belt portion includes an opposed pair of longitudinally disposed crest-like members, biased towards each other in a substantially abutting relationship. The crest-like members define therebetween a continuous, normally biased closed, channel along the upper belt portion. Means are disposed at the first and second locations and operatively associated with the belt member for urging the normally biased together crest-like members apart in order to provide access to the continuous channel whereby objects can be received into, or discharged from the channel. Motors are in communication with the conveyance path for effecting the travel of the endless belt member about the conveyance path. The conveyance path can be configured to include travel through two or more elevations and one or more directional changes in order to convey objects above, below and/or around existing structures.

THE ROTATION PERIOD AND LIGHT-CURVE AMPLITUDE OF KUIPER BELT DWARF PLANET 136472 MAKEMAKE (2005 FY9)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heinze, A. N.; DeLahunta, Daniel

Kuiper Belt dwarf planet 136472 Makemake, formerly known as 2005 FY9, is currently the third-largest known object in the Kuiper Belt, after the dwarf planets Pluto and Eris. It is currently second only to Pluto in apparent brightness, due to Eris' much larger heliocentric distance. Makemake shows very little photometric variability, which has prevented confident determination of its rotation period until now. Using extremely precise time-series photometry, we find that the rotation period of Makemake is 7.7710 {+-} 0.0030 hr, where the uncertainty is a 90% confidence interval. An alias period is detected at 11.41 hr, but is determined withmore » approximately 95% confidence not to be the true period. Makemake's 7.77 hr rotation period is in the typical range for Kuiper Belt objects, consistent with Makemake's apparent lack of a substantial satellite to alter its rotation through tides. The amplitude of Makemake's photometric light curve is 0.0286 {+-} 0.0016 mag in V. This amplitude is about 10 times less than Pluto's, which is surprising given the two objects' similar sizes and spectral characteristics. Makemake's photometric variability is instead similar to that of Eris, which is so small that no confident rotation period has yet been determined. It has been suggested that dwarf planets such as Makemake and Eris, both farther from the Sun and colder than Pluto, exhibit lower photometric variability because they are covered with a uniform layer of frost. Such a frost is probably the correct explanation for Eris. However, it may be inconsistent with the spectrum of Makemake, which resembles reddish Pluto more than neutrally colored Eris. Makemake may instead be a more Pluto-like object that we observe at present with a nearly pole-on viewing geometry-a possibility that can be tested with continuing observations over the coming decades.« less

Photodeformable polymer materials: towards light-driven spoke-type micromotor application

NASA Astrophysics Data System (ADS)

Zhu, Yutian; Zheng, Lihui; Liu, Zhao; Liu, Heng; Yu, Yanlei

2014-06-01

Using a photodeformable polymer material, liquid-crystalline polymer incorporated with azobenzene moieties, a spoke-type micromotor is designed, which could convert light energy directly into mechanical work. It consists of four driving belts, whose mechanical model is established and the driving moment of the micromotor upon irradiation with UV light and without photoirradiation is calculated, respectively. According to the calculated driving moment, the UV light and the visible light are arranged to irradiate from parallel and opposite direction of the micromotor simultaneously, which convert the bending deflection of the photodeformable polymer material belts to continuous rotation of the micromotor. As light is a green energy source that can be controlled remotely, instantly and without the aid of electric wires, the photodeformable polymer material has great potential to be utilized in micro-actuator and other relative applications.

Vocal Qualities in Music Theater Voice: Perceptions of Expert Pedagogues.

PubMed

Bourne, Tracy; Kenny, Dianna

2016-01-01

To gather qualitative descriptions of music theater vocal qualities including belt, legit, and mix from expert pedagogues to better define this voice type. This is a prospective, semistructured interview. Twelve expert teachers from United States, United Kingdom, Asia, and Australia were interviewed by Skype and asked to identify characteristics of music theater vocal qualities including vocal production, physiology, esthetics, pitch range, and pedagogical techniques. Responses were compared with published studies on music theater voice. Belt and legit were generally described as distinct sounds with differing physiological and technical requirements. Teachers were concerned that belt should be taught "safely" to minimize vocal health risks. There was consensus between teachers and published research on the physiology of the glottis and vocal tract; however, teachers were not in agreement about breathing techniques. Neither were teachers in agreement about the meaning of "mix." Most participants described belt as heavily weighted, thick folds, thyroarytenoid-dominant, or chest register; however, there was no consensus on an appropriate term. Belt substyles were named and generally categorized by weightedness or tone color. Descriptions of male belt were less clear than for female belt. This survey provides an overview of expert pedagogical perspectives on the characteristics of belt, legit, and mix qualities in the music theater voice. Although teacher responses are generally in agreement with published research, there are still many controversial issues and gaps in knowledge and understanding of this vocal technique. Breathing techniques, vocal range, mix, male belt, and vocal registers require continuing investigation so that we can learn more about efficient and healthy vocal function in music theater singing. Copyright © 2016 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Dynamical evolution of V-type photometric candidates in the central and outer main belt asteroids

NASA Astrophysics Data System (ADS)

Carruba, V.; Huaman, M.

2014-07-01

V-type asteroids are associated with basaltic composition, and are supposed to be fragments of crust of differentiated objects. Most V-type asteroids in the main belt are found in the inner main belt, and are either current members of the Vesta dynamical family (Vestoids), or past members that drifted away. However, several V-type photometric candidates have been recently identified in the central and outer main belt. The origin of this large population of V-type objects is not well understood, since it seems unlikely that Vestoids crossing the 3:1 and 5:2 mean-motion resonance with Jupiter could account for the whole observed population. In this work, we investigated a possible origin of the bodies from local sources, such as the parent bodies of the Eunomia, Merxia, and Agnia asteroid families in the central main belt, and Dembowska, Eos and Magnya asteroid families in the outer main belt. Our results show that dynamical evolution from the parent bodies of the Eunomia and Merxia/Agnia families on timescales of 2 Gyr or more could be responsible for the current orbital location of most of the V-type photometric candidates in the central main belt. Studies for the outer main belt are currently in progress. by the FAPESP (grant 2011/19863-3) and CAPES (grant 15029-12-3) funding agencies.

Spatial distributing characteristics of land use in the southern slope of mid-Himalaya Mountains

NASA Astrophysics Data System (ADS)

Lu, Chen

2014-12-01

The southern slope of mid-Himalayan Mountains located in China's Qomolangma National Natural Reserve in Tibet Autonomous Region, is made up of several non-continuous valleys. The study collected the data including DEM(SRTM90m), 1/250,000 land use map(year 2000), 1/100 million vegetation types map ,satellite images of 4 typical valleys on Google Earth Planet Map. Made use of ArcGIS9.3 spatial analysis technology, analyzed into the 2 aspects— Mountain altitudinal belts and slope gradient of soil types of Qinghai-Tibet Plateau, so as to abtain the spatial distributing characteristics of farmland and grassland in the research areas. The conclusions indicates that: (1)no farmland below 2200m altitude, land use is influenced intensively by slope gradient factor in the altitude range of < 2500m; (2)it is in 2500m-3800m altitude range meanwhile on the 2 farming suitable slope gradient belts(<5°, 5-15°) that the very focus zone has got the relatively larger potential, suitability and yield of farming utilization; (3)on the 3 grazing suitable slope gradient belts(<5°,5-15°,15-35°), the respective fodder quantities of the 4 valleys has low differences. land use of the 4 valleys are intensively restricted by altitude and slope gradient factors so that cultivating and grazing activities take place widely on the farming unsuitable slope gradient belts(15-35°,>35°) and grazing unsuitable slope gradient belt(>35°), which is disadvantaged to ecological environmental protection and rational utilization of land resources.

Contrasting Convective Flux Gradients in the U.S. Corn Belt as a Result of Vegetation Land Cover Type

NASA Astrophysics Data System (ADS)

Hiestand, M.

2017-12-01

Phenological differences between extensive croplands and remnant forests in the U.S. Corn Belt have been suggested as enhancing spatial gradients of latent and sensible heat fluxes that contribute to the distribution and amounts of convective rainfall on mesoscales. However, the exact magnitude of the intra-seasonal variability in convective fluxes between these two land-cover types has yet to be quantified. Previous work suggesting that non-classical mesoscale circulations operate within the Corn Belt has not involved direct flux observations obtained using the eddy flux covariance technique. This study compares five day running means of daily heat fluxes between two Ameriflux towers (US-Bo1 in Illinois and US-MMS in Indiana) representing rain-fed cropland and remnant forest, respectively for the growing seasons of 1999-2008. Latent heat values normalized to the net radiation show higher rates of evapotranspiration at the forested site than over the cropland during the start of the growing season. However, toward the end of the growing season, latent heat fluxes from the forest decrease and the cropland becomes the dominate source of evapotranspiration. Conversely, croplands dominate sensible heat fluxes at the start of the growing season whereas the remnant forests are associated with strong sensible heat fluxes in late summer. These intra-seasonal spatial differences of latent and sensible heat fluxes across the Corn Belt imply differences in moisture pooling that are suggested as enhancing atmospheric convection during favorable synoptic conditions, especially near the boundaries of these two land cover types. Understanding the physical mechanisms by which the spatial distribution of vegetated land cover can generate contrasting latent and sensible heat fluxes will lay the groundwork for improving mesoscale precipitation forecasts in the Corn Belt, and determining the possible impacts of ongoing land-cover and climate changes there.

Modelling the Deformation Front of a Fold-Thrust Belt: the Effect of an Upper Detachment Horizon

NASA Astrophysics Data System (ADS)

Burberry, C. M.; Koyi, H.; Nilfouroushan, F.; Cosgrove, J. W.

2008-12-01

Structures found at the deformation fronts of fold-thrust belts are variable in type, geometry and spatial organisation, as can be demonstrated from comparisons between structures in the Zagros Fold-Thrust Belt, Iran and the Sawtooth Range, Montana. A range of influencing factors has been suggested to account for this variation, including the mechanical properties and distribution of any detachment horizons within the cover rock succession. A series of analogue models was designed to test this hypothesis, under conditions scaled to represent the Sawtooth Range, Montana. A brittle sand pack, containing an upper ductile layer with variable geometry, was shortened above a ductile base and the evolution of the deformation front was monitored throughout the deformation using a high-accuracy laser scanner. In none of the experiments did the upper detachment horizon cover the entire model. In experiments where it pinched out perpendicular to the shortening direction, a triangle zone was formed when the deformation front reached the pinch out. This situation is analogous to the Teton Canyon region structures in the Sawtooth Range, Montana, where the Cretaceous Colorado Shale unit pinches out at the deformation front, favouring the development of a triangle zone in this region. When the pinch out was oblique to the shortening direction, a more complex series of structures was formed. However, when shortening stopped before the detachment pinch out was reached, the deformation front structures were foreland-propagating and no triangle zone was observed. This situation is analogous to foreland-propagating thrust structures developed at the deformation front in the Swift Dam region of the Sawtooth Range, Montana and to the development of fault-bend folds at the deformation front of the Zagros Fold-Thrust Belt, Iran. We suggest that the presence of a suitable intermediate detachment horizon within a sediment pile can be invoked as a valid explanation for the development of varied deformation front structures in fold-thrust belts. Specifically, the spatial extent of the upper detachment horizon with respect to the spatial extent of the deformed region is a key influence on the development of deformation front structures. However, we acknowledge that factors such as basement structure and variable sedimentation within the foreland basin may also be key influences on deformation front structures in other fold-thrust belts.

The development of an electronic system to continually monitor, indicate and control, 'belt slippage' in industrial friction 'V' belt drive transmission systems

NASA Astrophysics Data System (ADS)

Brown, R. E.

2012-05-01

Belts have been used for centuries as a mechanism to transfer power from some form of drive system to a variety of load systems. Within industry today, many designs of belts but particularly friction, trapezoidal shaped 'V' belts are used and generally transfer power generated by electrical motors to numerous forms of driven load systems. It is suggested that belt systems, through their simplicity are sadly neglected by maintenance functions and generally are left unattended until high degrees of 'belt slippage' through loss of friction or 'belt breakage' provokes maintenance attention. These circumstances are most often identified through the reduced or loss of manufacturing production or the occurrence of catastrophic circumstances such as fire caused through excessive friction/ high belt slippage conditions. Obviously, these situations incur financial losses to companies and in some cases the near loss of the company's main manufacturing plant. Consequently, a satisfactory, viable solution is currently sought by industry to improve on current labour intensive maintenance practices. This paper will present an account of the development of an industrially robust, accurate and repeatable electronic system which continually monitors and indicates the degree of 'slippage' in a 'V' belt drive transmission system and in the circumstance of belt breakage or high belt slippage will enable and control the switching off the drive motor.

New insights about the structure and variability of Saturn's electron radiation belts from Cassini's Ring-Grazing and Proximal orbits

NASA Astrophysics Data System (ADS)

Roussos, E.; Kollmann, P.; Krupp, N.; Paranicas, C.; Dialynas, K.; Sergis, N.; Mitchell, D. G.; Krimigis, S. M.

2017-12-01

During 2008, Cassini performed a unique series of orbits with a period of about 7 days which allowed us to monitor the evolution of Saturn's radiation belts across time scales shorter than the 28-day solar rotation and to identify the role of Corotating Interaction Regions (CIRs) as a key driver of dynamics for the belts' MeV electron population. Cassini's "Grand Finale" included a new set of such short-period orbits (6.5 to 7.2 days long), executed continuously between November 20, 2016 until September 15, 2017. While the 2008 observations were typically limited up to the L-shell of the G-ring, the Grand Finale orbits probed the radiation belts deeper and for a longer duration, covering the sparsely sampled regions outside the F- and A-rings and the previously unexplored particle trapping region inside the main rings. Observations with Cassini's MIMI/LEMMS instrument reveal that the electron belt intensities are persistently asymmetric in local time all the way down to the exterior edge of the main rings. The strength of this asymmetry appears to correlate with the appearence of transient belt components and changes in the intensity of the main belts which may be triggered by solar-wind or magnetospheric driven storms. The intensity of transient components in the electron belts, that may also appear in the small gap between the A- and the F-rings, evolve over several weeks, indicating that convection may occasionally dominate diffusive electron transport, the time scales of which are longer. Detection of MeV electrons inside the main rings during the Proximal orbits is ambiguous, but if electrons are present, all the LEMMS channels that may contain their signal indicate that their distribution would be very stable in time and unaffected by convective fields that drive electron transport outside the main rings.

Twin-belt continuous caster with containment and cooling of the exiting cast product for enabling high-speed casting of molten-center product

DOEpatents

Dykes, Charles D.; Daniel, Sabah S.; Wood, J. F. Barry

1990-02-20

In continuously casting molten metal into cast product by a twin-belt machine, it is desirable to achieve dramatic increases in speed (linear feet per minute) at which cast product exits the machine, particularly in installations where steel cast product is intended to feed a downstream regular rolling mill (as distinct from a planetary mill) operating in tandem with the twin-belt caster. Such high-speed casting produces product with a relatively thin shell and molten interior, and the shell tends to bulge outwardly due to metallostatic head pressure of the molten center. A number of cooperative features enable high-speed, twin-belt casting: (1) Each casting belt is slidably supported adjacent to the caster exit pulley for bulge control and enhanced cooling of cast product. (2) Lateral skew steering of each belt provides an effective increase in moving mold length plus a continuity of heat transfer not obtained with prior art belt steering apparatus. (3) The exiting slab is contained and supported downstream from the casting machine to prevent bulging of the shell of the cast product, and (4) spray cooling is incorporated in the exit containment apparatus for secondary cooling of cast product.

Scattering V-type asteroids during the giant planet instability: a step for Jupiter, a leap for basalt

NASA Astrophysics Data System (ADS)

Brasil, P. I. O.; Roig, F.; Nesvorný, D.; Carruba, V.

2017-06-01

V-type asteroids are a taxonomic class whose surface is associated with a basaltic composition. The only known source of V-type asteroids in the Main Asteroid Belt is (4) Vesta, which is located in the inner part of the Main Belt. However, many V-type asteroids cannot be dynamically linked to Vesta, in particular, those asteroids located in the middle and outer parts of the Main Belt. Previous works have failed to find mechanisms to transport V-type asteroids from the inner to the middle and outer belts. In this work, we propose a dynamical mechanism that could have acted on primordial asteroid families. We consider a model of the giant planet migration known as the jumping Jupiter model with five planets. Our study is focused on the period of 10 Myr that encompasses the instability phase of the giant planets. We show that, for different hypothetical Vesta-like paleo-families in the inner belt, the perturbations caused by the ice giant that is scattered into the asteroid belt before being ejected from the Solar system are able to scatter V-type asteroids to the middle and outer belts. Based on the orbital distribution of V-type candidates identified from the Sloan Digital Sky Survey and the VISTA Survey colours, we show that this mechanism is efficient enough provided that the hypothetical paleo-family originated from a 100 to 500 km crater excavated on the surface of (4) Vesta. This mechanism is able to explain the currently observed V-type asteroids in the middle and outer belts, with the exception of (1459) Magnya.

Research on Power Loss of Continuously Variable Transmission Based on Driving Cycles

NASA Astrophysics Data System (ADS)

Fu, Bing; Zhou, Yunshan; Cao, Chenglong; Li, Quan; Zhang, Feitie

2018-01-01

In order to further enhance the fuel economy of vehicles with continuously variable transmission (CVT), a CVT power loss model under dynamic condition is established based on the power loss model of each transmission component and the vehicle dynamic model. With driving cycles 10-15, NEDC and US06 as input, the distribution of CVT power loss and the influence of the main losses to vehicle fuel economy are analysed. The results show that the variation loss, oil pump loss and torque converter loss are the main losses of CVT power loss under driving cycles, and the metal belt and oil pump have relatively larger fuel saving potential. At low speed reducing the pump loss is more effective to fuel saving, while at high speed reducing the variation loss is more effective.

2010 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2010-07-01

The objective of this study was to establish 2010 safety belt and child safety seat usage rates in Kentucky. The 2010 survey continues to document the results after enactment of the original "second enforcement" statewide mandatory safety belt law in...

2009 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2009-07-01

The objective of this study was to establish 2009 safety belt and child safety seat usage rates in Kentucky. The 2009 survey continues to document the results after enactment of original "secondary enforcement" statewide mandatory safety belt law in ...

2002 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2002-07-01

The objective of this study was to establish 2002 safety belt and child safety seat usage rates in Kentucky. The 2002 survey continues to document the results after enactment of original "secondary enforcement" statewide mandatory safety belt law in ...

2007 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2007-08-01

The objective of this study was to establish 2007 safety belt and child safety seat usage rates in Kentucky. The 2007 survey continues to document the results after enactment of the initial "second enforcement" statewide mandatory safety belt law in ...

2001 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2001-08-01

The objective of this study was to establish 2001 safety belt and child safety seat usage rates in Kentucky. The 2001 survey continues to document the results after enactment of original "secondary enforcement" statewide mandatory safety belt law in ...

2006 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2006-08-01

The objective of this study was to establish 2006 safety belt and child safety seat usage rates in Kentucky. The 2006 survey continues to document the results after enactment of the initial "second enforcement" statewide mandatory safety belt law in ...

2008 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2008-08-01

The objective of this study was to establish 2008 safety belt and child safety seat usage rates in Kentucky. The 2008 survey continues to document the results after enactment of the initial "second enforcement" statewide mandatory safety belt law in ...

2005 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2005-08-01

The objective of this study was to establish 2005 safety belt and child safety seat usage rates in Kentucky. The 2005 survey continues to document the results after enactment of the initial "second enforcement" statewide mandatory safety belt law in ...

76 FR 53648 - Federal Motor Vehicle Safety Standards: Occupant Crash Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-29

... when the continuous motion of spooling the belt out is stopped. From that point, the seat belt cannot... reaction to LATCH found that drivers who preferred installing a CRS with seat belt as opposed to LATCH...

Variscan orogeny in the Black Sea region

NASA Astrophysics Data System (ADS)

Okay, Aral I.; Topuz, Gültekin

2017-03-01

Two Gondwana-derived Paleozoic belts rim the Archean/Paleoproterozoic nucleus of the East European Platform in the Black Sea region. In the north is a belt of Paleozoic passive-margin-type sedimentary rocks, which extends from Moesia to the Istanbul Zone and to parts of the Scythian Platform (the MOIS Block). This belt constituted the south-facing continental margin of the Laurussia during the Late Paleozoic. This margin was deformed during the Carboniferous by folding and thrusting and forms the Variscan foreland. In the south is a belt of metamorphic and granitic rocks, which extends from the Balkanides through Strandja, Sakarya to the Caucasus (BASSAC Block). The protoliths of the metamorphic rocks are predominantly late Neoproterozoic granites and Paleozoic sedimentary and igneous rocks, which were deformed and metamorphosed during the Early Carboniferous. There are also minor eclogites and serpentinites, mostly confined to the northern margin of the BASSAC Block. Typical metamorphism is of low pressure-high temperature type and occurred during the Early Carboniferous (Visean, 340-330 Ma) coevally with that observed in the Central Europe. Volumetrically, more than half of the crystalline belt is made up of Carboniferous-earliest Permian (335-294 Ma) granites. The type of metamorphism, its concurrent nature over 1800 km length of the BASSAC Block and voluminous acidic magmatism suggest that the thermal event probably occurred in the deep levels of a continental magmatic arc. The BASSAC arc collided with Laurussia in the mid-Carboniferous leading to the foreland deformation. The ensuing uplift in the Permian resulted in the deposition of continental red beds, which are associated with acidic magmatic rocks observed over the foreland as well as over the BASSAC Block. In the Black Sea region, there was no terminal collision of Laurussia with Gondwana during the Late Paleozoic and the Laurussia margin continued to face the Paleo-Tethyan ocean in the south.

Grinding Glass Disks On A Belt Sander

NASA Technical Reports Server (NTRS)

Lyons, James J., III

1995-01-01

Small machine attached to table-top belt sander makes possible to use belt sander to grind glass disk quickly to specified diameter within tolerance of about plus or minus 0.002 in. Intended to be used in place of production-shop glass grinder. Held on driveshaft by vacuum, glass disk rotated while periphery ground by continuous sanding belt.

Adaptive control of dynamic balance in human gait on a split-belt treadmill.

PubMed

Buurke, Tom J W; Lamoth, Claudine J C; Vervoort, Danique; van der Woude, Lucas H V; den Otter, Rob

2018-05-17

Human bipedal gait is inherently unstable and staying upright requires adaptive control of dynamic balance. Little is known about adaptive control of dynamic balance in reaction to long-term, continuous perturbations. We examined how dynamic balance control adapts to a continuous perturbation in gait, by letting people walk faster with one leg than the other on a treadmill with two belts (i.e. split-belt walking). In addition, we assessed whether changes in mediolateral dynamic balance control coincide with changes in energy use during split-belt adaptation. In nine minutes of split-belt gait, mediolateral margins of stability and mediolateral foot roll-off changed during adaptation to the imposed gait asymmetry, especially on the fast side, and returned to baseline during washout. Interestingly, no changes in mediolateral foot placement (i.e. step width) were found during split-belt adaptation. Furthermore, the initial margin of stability and subsequent mediolateral foot roll-off were strongly coupled to maintain mediolateral dynamic balance throughout the gait cycle. Consistent with previous results net metabolic power was reduced during split-belt adaptation, but changes in mediolateral dynamic balance control were not correlated with the reduction of net metabolic power during split-belt adaptation. Overall, this study has shown that a complementary mechanism of relative foot positioning and mediolateral foot roll-off adapts to continuously imposed gait asymmetry to maintain dynamic balance in human bipedal gait. © 2018. Published by The Company of Biologists Ltd.

The tectonic evolution of the Irtysh tectonic belt: New zircon U-Pb ages of arc-related and collisional granitoids in the Kalaxiangar tectonic belt, NW China

NASA Astrophysics Data System (ADS)

Hong, Tao; Klemd, Reiner; Gao, Jun; Xiang, Peng; Xu, Xing-Wang; You, Jun; Wang, Xin-Shui; Wu, Chu; Li, Hao; Ke, Qiang

2017-02-01

Precise geochronological constraints of the Irtysh tectonic belt situated between the Saur Island Arc and the Altay Terrane are crucial to a better understanding of the tectonic evolution of the Central Asian Orogenic Belt (CAOB). Recently, we discovered repeatedly deformed arc-related and collisional granitoids in the Kalaxiangar tectonic belt (KTB), which is located in the eastern part of the Irtysh tectonic belt. In this study, we report new whole-rock geochemical, zircon U-Pb and Hf isotopic data of the arc-related and collisional granitoids. Our data reveal that 1) arc-related granodioritic porphyries formed at ca. 382-374 Ma. Recrystallized zircon grains from a (ultra-)mylonitic granodiorite of the Laoshankou zone in the southern KTB display a U-Pb age of ca. 360 Ma; 2) syn-collisional granodioritic porphyries, which distribute along faults and parallel to the cleavage, were emplaced at ca. 367-356 Ma, with εHf(t) values varying from + 7.8 to + 14.2 and Hf model ages from 873 to 459 Ma; 3) a post-collisional A-type granodioritic porphyry, which crosscuts the NW-NNW trending schistosity of the metasedimentary country rocks at a low angle, has an age of ca. 324-320 Ma, while the εHf(t) values range from + 7.6 to + 14.4 with Hf model ages from 850 to 416 Ma; 4) post-collisional strike-slip A-type granite dykes, exposed along strike-slip faults, gave ages between 287 and 279 Ma, whereas the εHf(t) values range from + 4.9 to + 12.7 and the Hf model ages from 995 to 500 Ma; and 5) A-type biotite granite dykes, which intruded along conjugate tension joints, have ages of 274-271 Ma, and εHf(t) values from + 1.5 to + 13.2 with Hf model ages from 1196 to 454 Ma. Consequently, we propose that the collision between the Saur Island Arc and the Altay Terrane occurred in the Early Carboniferous (ca. 367-356 Ma) and the subsequent post-collisional tectonic process continued to the Late Carboniferous (ca. 324-320 Ma). It is further suggested that the Irtysh tectonic belt underwent large-scale strike-slip deformation during the mid-Permian between 287 and 279 Ma. The termination of the Irtysh tectonic belt orogeny is thought to have also occurred during the mid-Permian between 274 and 271 Ma.

V-type candidates and Vesta family asteroids in the Moving Objects VISTA (MOVIS) catalogue

NASA Astrophysics Data System (ADS)

Licandro, J.; Popescu, M.; Morate, D.; de León, J.

2017-04-01

Context. Basaltic asteroids (spectrally classified as V-types) are believed to be fragments of large differentiated bodies. The majority of them are found in the inner part of the asteroid belt, and are current or past members of the Vesta family. Recently, some V-type asteroids have been discovered far from the Vesta family supporting the hypothesis of the presence of multiple basaltic asteroids in the early solar system. The discovery of basaltic asteroids in the outer belt challenged the models of the radial extent and the variability of the temperature distribution in the early solar system. Aims: We aim to identify new basaltic V-type asteroids using near-infrared colors of 40 000 asteroids observed by the VHS-VISTA survey and compiled in the MOVIS-C catalogue. We also want to study their near-infrared colors and to study the near-infrared color distribution of the Vesta dynamical family. Methods: We performed a search in the MOVIS-C catalogue of all the asteroids with (Y-J) and (J-Ks) in the range (Y-J) ≥ 0.5 and (J-Ks) ≤ 0.3, associated with V-type asteroids, and studied their color distribution. We have also analyzed the near-infrared color distribution of 273 asteroid members of the Vesta family and compared them with the albedo and visible colors from WISE and SDSS data. We determined the fraction of V-type asteroids in the family. Results: We found 477 V-type candidates in MOVIS-C, 244 of them outside the Vesta dynamical family. We identified 19 V-type asteroids beyond the 3:1 mean motion resonance, 6 of them in the outer main belt, and 16 V-types in the inner main belt with proper inclination Ip ≤ 3.0°, well below the inclination of the Vesta family. We computed that 85% of the members of the Vesta dynamical family are V-type asteroids, and only 1-2% are primitive class asteroids and unlikely members of the family. Conclusions: This work almost doubles the sample of basaltic asteroid candidates in regions outside the Vesta family. Spectroscopic studies in the near-infrared and dynamical studies are needed to confirm their basaltic composition and to determine their origin.

Seat belt and child seat use in Lipetskaya Oblast, Russia: frequencies, attitudes, and perceptions.

PubMed

Ma, Sai; Tran, Nhan; Klyavin, Vladimir E; Zambon, Francesco; Hatcher, Kristin W; Hyder, Adnan A

2012-01-01

Despite the importance of understanding seat belt use patterns among drivers and passengers for the purpose of direct interventions or monitoring improvements, no study has described wearing rates for all seat positions in Russia. This study describes observed seat belt use and knowledge, attitudes, and perceptions of seat belt use in Lipetskaya Oblast, Russia. An observational study on the use of seat belts and child restraints in the Lipetskaya region conducted during October 2010 collected data in 6 districts and on 3 different road types. A roadside survey gathered information on knowledge, attitudes, and perceptions toward the use of seat belts from randomly selected drivers. Frequencies of seat belt use by seat position, gender, and road type were calculated. A multivariable logit model disclosed the associations between seat belt use and sociodemographic factors. The study design permitted comparison of observed seat belt use to self-reported seat belt use. A total of 25,795 vehicles and 39,833 drivers and passengers contributed observations. Overall, 55 percent of drivers were observed to be using seat belts. More than half (58%) of front seat passengers wore seat belts and only 9 percent of back seat passengers were observed to be wearing seat belts; 11 percent of cars with children had any type of child safety measure. Drivers on urban roads were less likely to wear seat belts compared to those on main highways and rural roads. Nearly 60 percent of survey respondents mentioned "seat belts save lives," and more than half mentioned law requirements and fines. Although the observed seat belt use in Lipetskaya Oblast is much higher than previous estimates in Russia, overall wearing rates remain far from universal. Rear seat passengers and children are particularly at risk. Because combined education and enforcement has proven to be effective elsewhere, such interventions are needed to improve seat belt use.

Explaining state-to-state differences in seat belt use : an analysis of socio-demographic variables.

DOT National Transportation Integrated Search

2011-02-01

"Despite the extensive evidence about the benefits of seat belt use, there is a great deal of variation in use within the US. For example, the national average for seat belt use in 2009 was 84 percent while the state-level averages ranged from 68 per...

2001 Safety belt usage survey in Kentucky

DOT National Transportation Integrated Search

2001-08-01

The objective of this study was to establish 2001 safety belt and child safety seat usage rates in Kentucky. The 2001 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994. It also documented the lo...

2002 safety belt usage survey in Kentucky

DOT National Transportation Integrated Search

2002-07-01

The objective of this study was to establish 2002 safety belt and child safety seat usage rates in Kentucky. The 2002 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994. Data were collected at 20...

2000 Safety belt usage survey in Kentucky

DOT National Transportation Integrated Search

2000-08-01

The objective of this study was to establish 2000 safety belt and child safety seat usage rates in Kentucky. The 2000 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994. Data were collected at 20...

Iron mineralization at the Songhu deposit, Chinese Western Tianshan: a type locality with regional metallogenic implications

NASA Astrophysics Data System (ADS)

Wang, Chun-Long; Wang, Yi-Tian; Dong, Lian-Hui; Qin, Ke-Zhang; Evans, Noreen J.; Zhang, Bing; Ren, Yi

2018-01-01

Hosted by volcaniclastics of the Carboniferous Dahalajunshan Formation, the Songhu iron deposit is located in the central segment of the Awulale metallogenic belt, Chinese Western Tianshan. Mineralization and alteration are structurally controlled by orogen-parallel NWW-striking faults. Integrating with mineralogical and stable isotopic analyses based on paragenetic relationships, two types of iron mineralization have been identified. The deuteric mineralization (Type I) represented by brecciated, banded, and disseminated-vein ores juxtaposed with potassic-calcic alteration in the inner zone, which was formed from a magmatic fluid generated during the late stages of regional volcanism. In contrast, the volcanic-hydrothermal mineralization (Type II) is characterized by hydrothermal features occurring in massive and agglomerated ores with abundant sulfides, and was generated from the magmatic fluid with seawater contamination. Two volcaniclastic samples from the hanging and footwall of the main orebody yield zircon U-Pb ages of 327.8 ± 3.1 and 332.0 ± 2.0 Ma, respectively, which indicate Middle Carboniferous volcanism. Timing for iron mineralization can be broadly placed in the same epoch. By reviewing geological, mineralogical, and geochemical features of the primary iron deposits in the Awulale metallogenic belt, we propose that the two types of iron mineralization in the Songhu iron deposit are representative regionally. A summary of available geochronological data reveals Middle-Late Carboniferous polycyclic ore-related volcanism, and nearly contemporaneous iron mineralization along the belt. Furthermore, petro-geochemistry of volcanic-volcaniclastic host rocks indicates that partial melting of a metasomatized mantle wedge under a continental arc setting could have triggered the continuous volcanic activities and associated metallogenesis.

Diffusive vs. impulsive energetic electron transport during radiation belt storms

NASA Astrophysics Data System (ADS)

Vassiliadis, D.; Koepke, M.; Tornquist, M.

2008-12-01

Earth's electron radiation belts are continually replenished by inward particle transport (as well as other, local acceleration processes) taking place during radiation belt storms. For some storms the radial transport is primarily diffusive while for others it is impulsive, or characterized by injections. To distinguish between these types of inward transport, we first use a dynamic model of the phase-space density as measured by POLAR/HIST and expressed in terms of adiabatic invariants [Green and Kivelson, 2004]. In a review of storms from 1997 to 2004 the coefficients of the model are peaked at characteristic temporal and phase- space (mu, k, L*) scales during specific storms. The transport is quantified in terms of those invariants which are violated and identified with peaks of the electron distribution in invariant space. Second, we run guiding- center simulations in wave fields fitted to in situ measurements complemented at low and high L by ground ULF pulsations. The modes of response identified in earlier studies from SAMPEX and POLAR electron flux measurements are now associated with primarily diffusive transport in the central range of the outer belt, L=4-8, and primarily impulsive transport near the plasmapause boundary, L=3-4.

Reducing The Risk Of Fires In Conveyor Transport

NASA Astrophysics Data System (ADS)

Cheremushkina, M. S.; Poddubniy, D. A.

2017-01-01

The paper deals with the actual problem of increasing the safety of operation of belt conveyors in mines. Was developed the control algorithm that meets the technical requirements of the mine belt conveyors, reduces the risk of fires of conveyors belt, and enables energy and resource savings taking into account random sort of traffic. The most effective method of decision such tasks is the construction of control systems with the use of variable speed drives for asynchronous motors. Was designed the mathematical model of the system "variable speed multiengine drive - conveyor - control system of conveyors", that takes into account the dynamic processes occurring in the elements of the transport system, provides an assessment of the energy efficiency of application the developed algorithms, which allows to reduce the dynamic overload in the belt to (15-20)%.

Genesis of the Hengling magmatic belt in the North China Craton: Implications for Paleoproterozoic tectonics

NASA Astrophysics Data System (ADS)

Peng, Peng; Guo, Jinghui; Zhai, Mingguo; Windley, Brian F.; Li, Tiesheng; Liu, Fu

2012-09-01

The 2200-1880 Ma igneous rocks in the central and eastern parts of the North China Craton (NCC) constitute a new Hengling magmatic belt (HMB), which includes the ~ 2147 Ma Hengling mafic sill/dyke swarm, the ~ 2060 Ma Yixingzhai mafic dyke swarm, and the ~ 1973 Ma Xiwangshan mafic dyke swarm. The three swarms are contiguous and have experienced variable degrees of metamorphism from greenschist to low amphibolite facies (Hengling), medium granulite facies (Yixingzhai), and medium/high-pressure granulite facies (Xiwangshan). They are all tholeiitic in composition typically with 47-52 wt.% SiO2 and 4-10 wt.% MgO, and all show light rare earth element enrichments and Nb- and Ta-depletion. Their Nd TDM ages are in the range of 2.5-3.0 Ga. Specifically, the Hengling and Yixingzhai dykes/sills are depleted in Th, U, Zr, Hf and Ti, whereas the Xiwangshan dykes are enriched in U and weakly depleted in other elements. Variable Sr-anomalies indicate significant feldspar accumulation (positive anomalies) or fractionation. The ɛNd(t) values of the three swarms are: - 3.2-+3.0 (Hengling), - 1.7-+ 1.8 (Yixingzhai) and - 1.4-+ 1.0 (Xiwangshan). These mafic representatives of the HMB originated from the > 2.5 Ga sub-continental lithospheric mantle of the NCC, and with A-type granites and other igneous associations in this belt they likely evolved in an intra-continental rift. The progressive changing compositions of the three swarms are interpreted in terms of their source regions at different depths, i.e., shallower and shallower through time. And the decrease in scale and size of the intrusions and their magma volumes indicate the progressive weakening of magmatism in this rift. The rocks in this belt are different chronologically, petrologically and chemically from those in the Xuwujia magmatic belt (XMB). We propose that the two magmatic belts represent two different magmatic systems in different blocks of the NCC, i.e., an eastern block (with the HMB) and a western block (with the XMB). Terminal collision was possibly a result of ridge subduction between the two blocks, which led to exhumation of the igneous rocks in the two belts from different crustal levels, distinguishable by their different grades of metamorphism.

Development of a belt-type wearable sensor system with multi-function for home health care

NASA Astrophysics Data System (ADS)

Ban, Yunho; Choi, Samjin; Jiang, Zhongwei; Park, Chanwon

2005-12-01

Some reports show that the physiological information measured in hospital is not enough without the one measured in home. The physiological information monitored in home, therefore, is strongly required recently. The goal of this research is to develop a wearable and tractable sensor system for detecting biomedical signals such as cardiac rhythm, respiration, body movement, and percentage of body fat (%BF) and for home health care. A belt type sensor for this purpose is developed, which consists of sensing materials of PVDF film and conductive fabrics. Also several data processing techniques, such as the discrete wavelet transform, cross correlation and adaptive filtering method, were introduced to eliminate noises and base wandering and to extract the specified components. The ECG and respiration signals obtained by the proposed belt type sensor system gave good agreements with commercial medical system. Furthermore, the body fat (%BF) measurement based on the four-electrode BIA was also built in the belt sensor. The body fat was calculated by measuring the body impedance from the belt type sensor and compared with the predicted %BF measured by the commercial adipometer (TBF-607). The results validated also the efficiency of the belt type sensor system.

Constraints on deformation of the Southern Andes since the Cretaceous from anisotropy of magnetic susceptibility

NASA Astrophysics Data System (ADS)

Maffione, Marco; Hernandez-Moreno, Catalina; Ghiglione, Matias C.; Speranza, Fabio; van Hinsbergen, Douwe J. J.; Lodolo, Emanuele

2015-12-01

The southernmost segment of the Andean Cordillera underwent a complex deformation history characterized by alternation of contractional, extensional, and strike-slip tectonics. Key elements of southern Andean deformation that remain poorly constrained, include the origin of the orogenic bend known as the Patagonian Orocline (here renamed as Patagonian Arc), and the exhumation mechanism of an upper amphibolite facies metamorphic complex currently exposed in Cordillera Darwin. Here, we present results of anisotropy of magnetic susceptibility (AMS) from 22 sites in Upper Cretaceous to upper Eocene sedimentary rocks within the internal structural domain of the Magallanes fold-and-thrust belt in Tierra del Fuego (Argentina). AMS parameters from most sites reveal a weak tectonic overprint of the original magnetic fabric, which was likely acquired upon layer-parallel shortening soon after sedimentation. Magnetic lineation from 17 sites is interpreted to have formed during compressive tectonic phases associated to a continuous N-S contraction. Our data, combined with the existing AMS database from adjacent areas, show that the Early Cretaceous-late Oligocene tectonic phases in the Southern Andes yielded continuous contraction, variable from E-W in the Patagonian Andes to N-S in the Fuegian Andes, which defined a radial strain field. A direct implication is that the exhumation of the Cordillera Darwin metamorphic complex occurred under compressive, rather than extensional or strike-slip tectonics, as alternatively proposed. If we agree with recent works considering the curved Magallanes fold-and-thrust belt as a primary arc (i.e., no relative vertical-axis rotation of the limbs occurs during its formation), then other mechanisms different from oroclinal bending should be invoked to explain the documented radial strain field. We tentatively propose a kinematic model in which reactivation of variably oriented Jurassic faults at the South American continental margin controlled the Late Cretaceous to Cenozoic evolution of the Magallanes fold-and-thrust belt, yielding the observed deformation pattern.

49 CFR 173.166 - Air bag inflators, air bag modules and seat-belt pretensioners.

Code of Federal Regulations, 2011 CFR

2011-10-01

... an inflatable bag assembly. A seat-belt pre-tensioner contains similar hazardous materials and is... manufacturer has submitted each design type air bag inflator, air bag module, or seat-belt pretensioner to a... or pretensioner design type for which approval is sought and details on the complete package. The...

49 CFR 173.166 - Air bag inflators, air bag modules and seat-belt pretensioners.

Code of Federal Regulations, 2010 CFR

2010-10-01

... an inflatable bag assembly. A seat-belt pre-tensioner contains similar hazardous materials and is... manufacturer has submitted each design type air bag inflator, air bag module, or seat-belt pretensioner to a... or pretensioner design type for which approval is sought and details on the complete package. The...

49 CFR 173.166 - Air bag inflators, air bag modules and seat-belt pretensioners.

Code of Federal Regulations, 2012 CFR

2012-10-01

... an inflatable bag assembly. A seat-belt pre-tensioner contains similar hazardous materials and is... manufacturer has submitted each design type air bag inflator, air bag module, or seat-belt pretensioner to a... or pretensioner design type for which approval is sought and details on the complete package. The...

Review of GEM Radiation Belt Dropout and Buildup Challenges

NASA Astrophysics Data System (ADS)

Tu, Weichao; Li, Wen; Morley, Steve; Albert, Jay

2017-04-01

In Summer 2015 the US NSF GEM (Geospace Environment Modeling) focus group named "Quantitative Assessment of Radiation Belt Modeling" started the "RB dropout" and "RB buildup" challenges, focused on quantitative modeling of the radiation belt buildups and dropouts. This is a community effort which includes selecting challenge events, gathering model inputs that are required to model the radiation belt dynamics during these events (e.g., various magnetospheric waves, plasmapause and density models, electron phase space density data), simulating the challenge events using different types of radiation belt models, and validating the model results by comparison to in situ observations of radiation belt electrons (from Van Allen Probes, THEMIS, GOES, LANL/GEO, etc). The goal is to quantitatively assess the relative importance of various acceleration, transport, and loss processes in the observed radiation belt dropouts and buildups. Since 2015, the community has selected four "challenge" events under four different categories: "storm-time enhancements", "non-storm enhancements", "storm-time dropouts", and "non-storm dropouts". Model inputs and data for each selected event have been coordinated and shared within the community to establish a common basis for simulations and testing. Modelers within and outside US with different types of radiation belt models (diffusion-type, diffusion-convection-type, test particle codes, etc.) have participated in our challenge and shared their simulation results and comparison with spacecraft measurements. Significant progress has been made in quantitative modeling of the radiation belt buildups and dropouts as well as accessing the modeling with new measures of model performance. In this presentation, I will review the activities from our "RB dropout" and "RB buildup" challenges and the progresses achieved in understanding radiation belt physics and improving model validation and verification.

Restraint use and lower extremity fractures in frontal motor vehicle collisions.

PubMed

Estrada, Lance S; Alonso, Jorge E; McGwin, Gerald; Metzger, Jesse; Rue, Loring W

2004-08-01

Seat belts and air bags have been shown to significantly reduce morbidity and mortality following MVCs. Research suggests that restraint use does not protect against lower extremity fracture; however, no population-based studies of this association exist. The purpose of this study is to compare the effectiveness of combined seat belt and airbag restraint systems with airbag alone, seat belt alone, and no restraints with respect to incidence and location of lower extremity fractures. A retrospective analysis of front seat occupants involved in police-reported, tow-away frontal MVCs was conducted using data from the 1995 through 2000 National Automotive Sampling System (NASS). Incidence and relative risk (RR) of fracture to specific bony regions were measured according to seat belt use and airbag deployment. Compared with unrestrained occupants, occupants restrained with airbag only had significantly higher risk for all types of lower extremity fractures whereas those occupants restrained with either seat belt only or seat belt and airbag had lower risk of fracture. The greatest difference was seen with tibia/fibula fractures in airbag only (RR, 2.14) but this trend continued to be significant with femur and pelvic fractures (RR, 1.13 and 1.23, respectively). While airbags may reduce the risk of death when used alone or in combination with seat belts, the results of this study demonstrate that air bags increase the risk of lower extremity fractures when used as the sole method of passenger protection. Also, they may do so differentially according to skeletal region. This data strongly support the consideration of developing accessory knee bolster airbags to prevent the "submarining" or sliding under the airbag that may be responsible for this finding.

Structured Slow Solar Wind Variability: Streamer-blob Flux Ropes and Torsional Alfvén Waves

NASA Astrophysics Data System (ADS)

Higginson, A. K.; Lynch, B. J.

2018-05-01

The slow solar wind exhibits strong variability on timescales from minutes to days, likely related to magnetic reconnection processes in the extended solar corona. Higginson et al. presented a numerical magnetohydrodynamic simulation that showed interchange magnetic reconnection is ubiquitous and most likely responsible for releasing much of the slow solar wind, in particular along topological features known as the Separatrix-Web (S-Web). Here, we continue our analysis, focusing on two specific aspects of structured slow solar wind variability. The first type is present in the slow solar wind found near the heliospheric current sheet (HCS), and the second we predict should be present everywhere S-Web slow solar wind is observed. For the first type, we examine the evolution of three-dimensional magnetic flux ropes formed at the top of the helmet streamer belt by reconnection in the HCS. For the second, we examine the simulated remote and in situ signatures of the large-scale torsional Alfvén wave (TAW), which propagates along an S-Web arc to high latitudes. We describe the similarities and differences between the reconnection-generated flux ropes in the HCS, which resemble the well-known “streamer blob” observations, and the similarly structured TAW. We discuss the implications of our results for the complexity of the HCS and surrounding plasma sheet and the potential for particle acceleration, as well as the interchange reconnection scenarios that may generate TAWs in the solar corona. We discuss predictions from our simulation results for the dynamic slow solar wind in the extended corona and inner heliosphere.

Adaptation mechanism of interlimb coordination in human split-belt treadmill walking through learning of foot contact timing: a robotics study

PubMed Central

Fujiki, Soichiro; Aoi, Shinya; Funato, Tetsuro; Tomita, Nozomi; Senda, Kei; Tsuchiya, Kazuo

2015-01-01

Human walking behaviour adaptation strategies have previously been examined using split-belt treadmills, which have two parallel independently controlled belts. In such human split-belt treadmill walking, two types of adaptations have been identified: early and late. Early-type adaptations appear as rapid changes in interlimb and intralimb coordination activities when the belt speeds of the treadmill change between tied (same speed for both belts) and split-belt (different speeds for each belt) configurations. By contrast, late-type adaptations occur after the early-type adaptations as a gradual change and only involve interlimb coordination. Furthermore, interlimb coordination shows after-effects that are related to these adaptations. It has been suggested that these adaptations are governed primarily by the spinal cord and cerebellum, but the underlying mechanism remains unclear. Because various physiological findings suggest that foot contact timing is crucial to adaptive locomotion, this paper reports on the development of a two-layered control model for walking composed of spinal and cerebellar models, and on its use as the focus of our control model. The spinal model generates rhythmic motor commands using an oscillator network based on a central pattern generator and modulates the commands formulated in immediate response to foot contact, while the cerebellar model modifies motor commands through learning based on error information related to differences between the predicted and actual foot contact timings of each leg. We investigated adaptive behaviour and its mechanism by split-belt treadmill walking experiments using both computer simulations and an experimental bipedal robot. Our results showed that the robot exhibited rapid changes in interlimb and intralimb coordination that were similar to the early-type adaptations observed in humans. In addition, despite the lack of direct interlimb coordination control, gradual changes and after-effects in the interlimb coordination appeared in a manner that was similar to the late-type adaptations and after-effects observed in humans. The adaptation results of the robot were then evaluated in comparison with human split-belt treadmill walking, and the adaptation mechanism was clarified from a dynamic viewpoint. PMID:26289658

Adaptation mechanism of interlimb coordination in human split-belt treadmill walking through learning of foot contact timing: a robotics study.

PubMed

Fujiki, Soichiro; Aoi, Shinya; Funato, Tetsuro; Tomita, Nozomi; Senda, Kei; Tsuchiya, Kazuo

2015-09-06

Human walking behaviour adaptation strategies have previously been examined using split-belt treadmills, which have two parallel independently controlled belts. In such human split-belt treadmill walking, two types of adaptations have been identified: early and late. Early-type adaptations appear as rapid changes in interlimb and intralimb coordination activities when the belt speeds of the treadmill change between tied (same speed for both belts) and split-belt (different speeds for each belt) configurations. By contrast, late-type adaptations occur after the early-type adaptations as a gradual change and only involve interlimb coordination. Furthermore, interlimb coordination shows after-effects that are related to these adaptations. It has been suggested that these adaptations are governed primarily by the spinal cord and cerebellum, but the underlying mechanism remains unclear. Because various physiological findings suggest that foot contact timing is crucial to adaptive locomotion, this paper reports on the development of a two-layered control model for walking composed of spinal and cerebellar models, and on its use as the focus of our control model. The spinal model generates rhythmic motor commands using an oscillator network based on a central pattern generator and modulates the commands formulated in immediate response to foot contact, while the cerebellar model modifies motor commands through learning based on error information related to differences between the predicted and actual foot contact timings of each leg. We investigated adaptive behaviour and its mechanism by split-belt treadmill walking experiments using both computer simulations and an experimental bipedal robot. Our results showed that the robot exhibited rapid changes in interlimb and intralimb coordination that were similar to the early-type adaptations observed in humans. In addition, despite the lack of direct interlimb coordination control, gradual changes and after-effects in the interlimb coordination appeared in a manner that was similar to the late-type adaptations and after-effects observed in humans. The adaptation results of the robot were then evaluated in comparison with human split-belt treadmill walking, and the adaptation mechanism was clarified from a dynamic viewpoint. © 2015 The Authors.

46 CFR 169.825 - Wearing of safety belts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Wearing of safety belts. 169.825 Section 169.825 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Operations § 169.825 Wearing of safety belts. The master of each vessel shall ensure that each person wears...

46 CFR 169.825 - Wearing of safety belts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Wearing of safety belts. 169.825 Section 169.825 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Operations § 169.825 Wearing of safety belts. The master of each vessel shall ensure that each person wears...

Stress distribution and pressure-bearing capacity of a high-pressure split-cylinder die with prism cavity

NASA Astrophysics Data System (ADS)

Zhao, Liang; Li, Mingzhe; Wang, Liyan; Qu, Erhu; Yi, Zhuo

2018-03-01

A novel high-pressure belt-type die with a split-type cylinder is investigated with respect to extending its lifetime and improving its pressure bearing capacity. Specifically, a tungsten carbide cylinder is split into several parts along the radial direction with a prism-type cavity. In this paper, the cylinders with different split numbers are chosen to study the stress distribution and compare them with the traditional belt-type die. The simulation results indicate that the split cylinder has much smaller stress than those in the belt-type cylinder, and the statistical analysis reveals that the split-pressure cylinder is able to bear higher pressure. Experimental tests also show that the high-pressure die with a split cylinder and prism cavity has a stronger pressure-bearing capacity than a belt-type die. The split cylinder has advantages of easy manufacturing, high pressure bearing capacity, and replaceable performance.

Characterization of airborne float coal dust emitted during continuous mining, longwall mining and belt transport.

PubMed

Shahan, M R; Seaman, C E; Beck, T W; Colinet, J F; Mischler, S E

2017-09-01

Float coal dust is produced by various mining methods, carried by ventilating air and deposited on the floor, roof and ribs of mine airways. If deposited, float dust is re-entrained during a methane explosion. Without sufficient inert rock dust quantities, this float coal dust can propagate an explosion throughout mining entries. Consequently, controlling float coal dust is of critical interest to mining operations. Rock dusting, which is the adding of inert material to airway surfaces, is the main control technique currently used by the coal mining industry to reduce the float coal dust explosion hazard. To assist the industry in reducing this hazard, the Pittsburgh Mining Research Division of the U.S. National Institute for Occupational Safety and Health initiated a project to investigate methods and technologies to reduce float coal dust in underground coal mines through prevention, capture and suppression prior to deposition. Field characterization studies were performed to determine quantitatively the sources, types and amounts of dust produced during various coal mining processes. The operations chosen for study were a continuous miner section, a longwall section and a coal-handling facility. For each of these operations, the primary dust sources were confirmed to be the continuous mining machine, longwall shearer and conveyor belt transfer points, respectively. Respirable and total airborne float dust samples were collected and analyzed for each operation, and the ratio of total airborne float coal dust to respirable dust was calculated. During the continuous mining process, the ratio of total airborne float coal dust to respirable dust ranged from 10.3 to 13.8. The ratios measured on the longwall face were between 18.5 and 21.5. The total airborne float coal dust to respirable dust ratio observed during belt transport ranged between 7.5 and 21.8.

77 FR 31067 - Cleveland Commercial Railroad Company, LLC-Continuance in Control Exemption-Cleveland Harbor Belt...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-24

... becoming a Class III rail carrier. CCR has established CHB as a limited liability company and has the... Commercial Railroad Company, LLC--Continuance in Control Exemption--Cleveland Harbor Belt Railroad Cleveland Commercial Railroad Company, LLC (CCR), a Class III rail carrier, has filed a verified notice of exemption...

Assessment of continuous gas resources in the Phosphoria Formation of the Wyoming Thrust Belt Province, Wyoming, Idaho, and Utah, 2017

USGS Publications Warehouse

Schenk, Christopher J.; Mercier, Tracey J.; Tennyson, Marilyn E.; Woodall, Cheryl A.; Finn, Thomas M.; Pitman, Janet K.; Gaswirth, Stephanie B.; Marra, Kristen R.; Le, Phuong A.; Klett, Timothy R.; Leathers-Miller, Heidi M.

2018-04-13

Using a geology-based assessment methodology, the U.S. Geological Survey estimated mean undiscovered, technically recoverable resources of 198 billion cubic feet of continuous gas in the Phosphoria Formation of the Wyoming Thrust Belt Province, Wyoming, Idaho, and Utah.

Daytime and nighttime seat belt use at selected sites in New Mexico

DOT National Transportation Integrated Search

2007-01-01

Observational surveys of seat belt use were conducted at 108 observation sites across New Mexico during both daytime and nighttime hours. Belt use at night measured 6.2 percentage points lower than daytime. Belt use was related to sex, vehicle type, ...

Pelvic Belt Effects on Health Outcomes and Functional Parameters of Patients with Sacroiliac Joint Pain

PubMed Central

Hammer, Niels; Möbius, Robert; Schleifenbaum, Stefan; Hammer, Karl-Heinz; Klima, Stefan; Lange, Justin S.; Soisson, Odette; Winkler, Dirk; Milani, Thomas L.

2015-01-01

Introduction The sacroiliac joint (SIJ) is a common source of low back pain. However, clinical and functional signs and symptoms correlating with SIJ pain are widely unknown. Pelvic belts are routinely applied to treat SIJ pain but without sound evidence of their pain-relieving effects. This case-control study compares clinical and functional data of SIJ patients and healthy control subjects and evaluates belt effects on SIJ pain. Methods 17 SIJ patients and 17 healthy controls were included in this prospective study. The short-form 36 survey and the numerical rating scale were used to characterize health-related quality of life in patients in a six-week follow-up and the pain-reducing effects of pelvic belts. Electromyography data were obtained from the gluteus maximus, biceps femoris, rectus femoris and medial vastus. Alterations of muscle activity, variability and gait patterns were compared in patients and controls along with the belts’ effects in a dynamic setting when walking. Results Significant improvements were observed in the short-form 36 survey of the SIJ patients, especially in the physical health subscores. Minor declines were also observed in the numerical rating scale on pain. Belt-related changes of muscle activity and variability were similar in patients and controls with one exception: the rectus femoris activity decreased significantly in patients with belt application when walking. Further belt effects include improved cadence and gait velocity in patients and controls. Conclusions Pelvic belts improve health-related quality of life and are potentially attributed to decreased SIJ-related pain. Belt effects include decreased rectus femoris activity in patients and improved postural steadiness during locomotion. Pelvic belts may therefore be considered as a cost-effective and low-risk treatment of SIJ pain. Trial Registration ClinicalTrials.gov NCT02027038 PMID:26305790

Injury pattern as an indication of seat belt failure in ejected vehicle occupants.

PubMed

Freeman, Michael D; Eriksson, Anders; Leith, Wendy

2014-09-01

Prior authors have suggested that when occupant ejection occurs in association with a seat belt failure, entanglement of the outboard upper extremity (OUE) with the retracting shoulder belt will invariably occur, leaving injury pattern evidence of belt use. In the present investigation, the authors assessed this theory using data accessed from the NASS-CDS for ejected front seat occupants of passenger vehicles. Logistic regression models were used to assess the associations between seat belt failure status and injuries. Injury types associated with seat belt failure were significant OUE and head injuries (OR = 3.87, [95% CI 1.2, 13.0] and 3.1, [95% CI 1.0, 9.7], respectively). The two injury types were found to be a predictor of seat belt use and subsequent failure only if combined with a high (≥0.8) precrash probability of belt use. The injury pattern associated with a seat belt failure-related ejection has limited use in the forensic investigation of crash-related ejections. © 2014 American Academy of Forensic Sciences.

Toroidal core winder

DOEpatents

Potthoff, Clifford M.

1978-01-01

The disclosure is directed to an apparatus for placing wire windings on a toroidal body, such as a transformer core, having an orifice in its center. The apparatus comprises a wire storage spool, a wire loop holding continuous belt maintained in a C-shaped loop by a belt supporting structure and provision for turning the belt to place and tighten loops of wire on a toroidal body, which is disposed within the gap of the C-shaped belt loop.

Geography of the asteroid belt

NASA Technical Reports Server (NTRS)

Zellner, B. H.

1978-01-01

The CSM classification serves as the starting point on the geography of the asteroid belt. Raw data on asteroid types are corrected for observational biases (against dark objects, for instance) to derive the distribution of types throughout the belt. Recent work on family members indicates that dynamical families have a true physical relationship, presumably indicating common origin in the breakup of a parent asteroid.

46 CFR 169.723 - Safety belts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Safety belts. 169.723 Section 169.723 Shipping COAST... Control, Miscellaneous Systems, and Equipment § 169.723 Safety belts. Each vessel must carry a harness type safety belt conforming to Offshore Racing Council (ORC) standards for each person on watch or...

46 CFR 169.723 - Safety belts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Safety belts. 169.723 Section 169.723 Shipping COAST... Control, Miscellaneous Systems, and Equipment § 169.723 Safety belts. Each vessel must carry a harness type safety belt conforming to Offshore Racing Council (ORC) standards for each person on watch or...

Personal continuous air monitor

DOEpatents

Morgan, Ronald G.; Salazar, Samuel A.

2000-01-01

A personal continuous air monitor capable of giving immediate warning of the presence of radioactivity has a filter/detector head to be worn in the breathing zone of a user, containing a filter mounted adjacent to radiation detectors, and a preamplifier. The filter/detector head is connected to a belt pack to be worn at the waist or on the back of a user. The belt pack contains a signal processor, batteries, a multichannel analyzer, a logic circuit, and an alarm. An air pump also is provided in the belt pack for pulling air through the filter/detector head by way of an air tube.

Persistence of Salmonella on egg conveyor belts is dependent on the belt type but not on the rdar morphotype.

PubMed

Stocki, S L; Annett, C B; Sibley, C D; McLaws, M; Checkley, S L; Singh, N; Surette, M G; White, A P

2007-11-01

Commercial caged layer flocks in Alberta, Canada, are commonly monitored for Salmonella enterica serovar Enteritidis (SE) and S. enterica serovar Typhimurium (ST) by environmental sampling. In one recent case, a SE strain isolated from the egg conveyor belt was a source of persistent infection for the flock. This study was undertaken to examine Salmonella colonization on egg conveyor belts and to determine whether the rdar morphotype, a conserved physiology associated with aggregation and long-term survival, contributed to persistence. Four woven belts constructed of natural or nonnatural fibers and a 1-piece belt made of vinyl were tested with rdar-positive ST and SE strains and a rdar-negative ST DeltaagfD reference strain. The type of egg belt was the most important factor influencing Salmonella colonization and persistence. The vinyl belt, with the least surface area available for colonization, had the fewest Salmonella remaining after washing and disinfection, whereas the hemp-plastic belt, with the greatest surface area, had the most Salmonella remaining. Real-time gene expression indicated that the rdar morphotype was involved in colonizing the egg belt pieces; however, it was not essential for persistence. In addition, rdar-positive and rdar-negative strains were equally similarly to disinfection on the egg belt pieces. The results indicate that Salmonella can persist on a variety of egg belts by mechanisms other than the rdar morphotype, and that using egg conveyer belts with reduced surface area for bacterial colonization can lessen contamination problems.

Impact injuries in pregnancy. I, Experimental studies.

DOT National Transportation Integrated Search

1968-03-01

Eleven pregnant baboons were subjected to experimental impacts. Variables included 20-, 33-, and 40-G levels of decelerative forces; forward and rearward facing seats; lap belt and lap belt plus shoulder harness restraint; and seat pans tilted 20 deg...

Use of seatbelts in cars with automatic belts.

PubMed Central

Williams, A F; Wells, J K; Lund, A K; Teed, N J

1992-01-01

Use of seatbelts in late model cars with automatic or manual belt systems was observed in suburban Washington, DC, Chicago, Los Angeles, and Philadelphia. In cars with automatic two-point belt systems, the use of shoulder belts by drivers was substantially higher than in the same model cars with manual three-point belts. This finding was true in varying degrees whatever the type of automatic belt, including cars with detachable nonmotorized belts, cars with detachable motorized belts, and especially cars with nondetachable motorized belts. Most of these automatic shoulder belts systems include manual lap belts. Use of lap belts was lower in cars with automatic two-point belt systems than in the same model cars with manual three-point belts; precisely how much lower could not be reliably estimated in this survey. Use of shoulder and lap belts was slightly higher in General Motors cars with detachable automatic three-point belts compared with the same model cars with manual three-point belts; in Hondas there was no difference in the rates of use of manual three-point belts and the rates of use of automatic three-point belts. PMID:1561301

29 CFR 1926.959 - Lineman's body belts, safety straps, and lanyards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Power Transmission and Distribution § 1926.959 Lineman's body belts, safety straps, and lanyards. (a) General...

29 CFR 1926.959 - Lineman's body belts, safety straps, and lanyards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Power Transmission and Distribution § 1926.959 Lineman's body belts, safety straps, and lanyards. (a) General...

29 CFR 1926.959 - Lineman's body belts, safety straps, and lanyards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Power Transmission and Distribution § 1926.959 Lineman's body belts, safety straps, and lanyards. (a) General...

29 CFR 1926.959 - Lineman's body belts, safety straps, and lanyards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Power Transmission and Distribution § 1926.959 Lineman's body belts, safety straps, and lanyards. (a) General...

NW-SE Pliocene-Quaternary extension in the Apan-Acoculco region, eastern Trans-Mexican Volcanic Belt

NASA Astrophysics Data System (ADS)

García-Palomo, Armando; Macías, José Luis; Jiménez, Adrián; Tolson, Gustavo; Mena, Manuel; Sánchez-Núñez, Juan Manuel; Arce, José Luis; Layer, Paul W.; Santoyo, Miguel Ángel; Lermo-Samaniego, Javier

2018-01-01

The Apan-Acoculco area is located in the eastern portion of the Mexico basin and the Trans-Mexican Volcanic Belt. The area is transected by right-stepping variably dipping NE-SW normal faults. The Apan-Tlaloc Fault System is a major discontinuity that divides the region into two contrasting areas with different structural and volcanic styles. a) The western area is characterized by a horst-graben geometry with widespread Quaternary monogenetic volcanism and scattered outcrops of Miocene and Pliocene rocks. b) The eastern area is dominated by tilted horsts with a domino-like geometry with widespread Miocene and Pliocene rocks, scattered Quaternary monogenetic volcanoes and the Acoculco Caldera. Gravity data suggest that this structural geometry continues into the Mesozoic limestones. Normal faulting was active since the Pliocene with three stages of extension. One of them, an intense dilatational event began during late Pliocene and continues nowadays, contemporaneously with the emplacement of the Apan-Tezontepec Volcanic Field and the Acoculco caldera. Statistical analysis of cone elongation, cone instability, and the kinematic analysis of faults attest for a NW50°SE ± 7° extensional regime in the Apan-Acoculco area. The activity in some portions of the Apan-Tlaloc Fault System continues today as indicated by earthquake swarms recorded in 1992 and 1996, that disrupted late Holocene paleosols, and Holocene volcanism.

Laterally bendable belt conveyor

DOEpatents

Peterson, William J.

1985-01-01

An endless, laterally flexible and bendable belt conveyor particularly adapted for coal mining applications in facilitating the transport of the extracted coal up- or downslope and around corners in a continuous manner is disclosed. The conveying means includes a flat rubber belt reinforced along the middle portion thereof along which the major portion of the belt tension is directed so as to cause rotation of the tubular shaped belt when trammed around lateral turns thus preventing excessive belt bulging distortion between adjacent belt supports which would inhibit belt transport. Pretension induced into the fabric reinforced flat rubber belt by conventional belt take-up means supports the load conveyed when the belt conveyor is making lateral turns. The carrying and return portions of the belt are supported and formed into a tubular shape by a plurality of shapers positioned along its length. Each shaper is supported from above by a monorail and includes clusters of idler rollers which support the belt. Additional cluster rollers in each shaper permit the belt supporting roller clusters to rotate in response to the belt's operating tension imposed upon the cluster rollers by induced lateral belt friction forces. The freely rotating roller clusters thus permit the belt to twist on lateral curves without damage to itself while precluding escape of the conveyed material by effectively enclosing it in the tube-shaped, inner belt transport length.

The metallogeny of Late Triassic rifting of the Alexander terrane in southeastern Alaska and northwestern British Columbia

USGS Publications Warehouse

Taylor, C.D.; Premo, W.R.; Meier, A.L.; Taggart, J.E.

2008-01-01

A belt of unusual volcanogenic massive sulfide (VMS) occurrences is located along the eastern margin of the Alexander terrane throughout southeastern Alaska and northwestern British Columbia and exhibits a range of characteristics consistent with a variety of syngenetic to epigenetic deposit types. Deposits within this belt include Greens Creek and Windy Craggy, the economically most significant VMS deposit in Alaska and the largest in North America, respectively. The occurrences are hosted by a discontinuously exposed, 800-km-long belt of rocks that consist of a 200- to 800-m-thick sequence of conglomerate, limestone, marine elastic sedimentary rocks, and tuff intercalated with and overlain by a distinctive unit of mafic pyroclastic rocks and pillowed flows. Faunal data bracket the age of the host rocks between Anisian (Middle Triassic) and late Norian (late Late Triassic). This metallogenic belt is herein referred to as the Alexander Triassic metallogenic belt. The VMS occurrences show systematic differences in degree of structural control, chemistry, and stratigraphic setting along the Alexander Triassic metallogenic belt that suggest important spatial or temporal changes in the tectonic environment of formation. At the southern end of the belt, felsic volcanic rocks overlain by shallow-water limestones characterize the lower part of the sequence. In the southern and middle portion of the belt, a distinctive pebble conglomerate marks the base of the section and is indicative of high-energy deposition in a near slope or basin margin setting. At the northern end of the belt the conglomerates, limestones, and felsic volcanic rocks are absent and the belt is composed of deep-water sedimentary and mafic volcanic rocks. This northward change in depositional environment and lithofacies is accompanied by a northward transition from epithermal-like structurally controlled, discontinuous, vein- and pod-shaped, Pb-Zn-Ag-Ba-(Cu) occurrences with relatively simple mineralogy, to sulfosalt-enriched VMS occurrences exhibiting characteristics of vein, diagenetic replacement, and exhalative styles of mineralization, and finally to Cu-Zn-(Co-Au) occurrences with larger and more clearly stratiform orebody morphologies. Occurrences in the middle of the belt are transitional in nature between structurally controlled types of mineralization that formed in a shallow-water, near-arc setting, to those having a more stratiform appearance, formed in a deeper water, rift-basin setting. The geologic setting in the south is consistent with shallow subaqueous emplacement on the flanks of the Alexander terrane. Northward, the setting changes to an increasingly deeper back- or intra-arc rift basin. Igneous activity in the Alexander Triassic metallogenic belt is characterized by a bimodal suite of volcanic rocks and a previously unrecognized association with mafic-ultramafic hypabyssal intrusions. Immobile trace and rare earth element (BEE) geochemical data indicate that felsic rocks in the southern portion of the belt are typical calc-alkaline rhyolites, which give way in the middle of the belt to peralkaline rhyolites. Rhyolites are largely absent in the northern part of the belt. Throughout the belt, the capping basaltic rocks have transitional geochemical signatures. Radiogenic isotope data for these rocks are also transitional (basalts and gabbros: ??-Nd = 4-9 and 87Sr/86Sr initial at 215 Ma = 0.7037-0.7074). Together these data are interpreted to reflect variable assimilation of mature island-arc crust by more primitive melts having the characteristics of either mid-ocean ridge (MORB) or intraplate (within-plate) basalts (WPB). The ore and host-rock geochemistry and the sulfosalt-rich mineralogy of the deposits are strikingly similar to recent descriptions of active sea-floor hydrothermal (white smoker) systems in back arcs of the southwest Pacific Ocean. These data, in concert with existing faunal ages, record the formation of a belt of VMS deposits

Dronning Maud Lands (East Antarctica) significance for Late Mesoproterozoic/Early Neoproterozoic supercontinent reconstructions

NASA Astrophysics Data System (ADS)

Jacobs, Joachim; Elburg, Marlina; Laeufer, Andreas; Kleinhanns, Ilka C.; Henjes-Kunst, Friedhelm; Estrada, Solveig; Ruppel, Antonia; Damaske, Detlef; Montero, Pilar; Bea, Fernando

2015-04-01

The recent study of a so far white spot on the geological map of Dronning Maud Land (DML) during the international GEA expeditions sheds new light on the significance of major tectono-metamorphic provinces of Dronning Maud Land, East Antarctica. The western part of eastern DML allows the characterization and ground-truthing of a large and mostly ice-covered area, that is geophysically distinct and which was previously interpreted as a potentially older cratonic block south of a Late Neoproterozoic/EarlyPaleozoic mobile belt, which is exposed in the Sør Rondane Mts. (SRM). SHRIMP/SIMS zircon analyses of 20 samples together with new geochemistry indicate that the exposed basement consists of a ca. 1000-900 Ma juvenile terrane that is very similar to the juvenile rocks of the SW-Terrane of the SRM, a characteristic gabbro-trondhjemite-tonalite-granite suite. However, in contrast to the southern part of the SW-Terrane, our study area shows intense crustal reworking at medium to high-grade conditions between ca. 630-520 Ma, associated with significant felsic melt production, including A-type granitoid magmatism. Therefore, the study area, and thereby the aeromagnetically distinct SE DML province does neither represent the foreland of a Late Neoproterozoic/EarlyPaleozoic mobile belt, nor a craton, as has previously been speculated. It more likely represents the westward continuation of Rayner-age crust (1000-900 Ma) that has undergone additional protracted LN/EP overprinting. We interpret the southern part of the only weakly overprinted SW-Terrane as a mega-boudin within a broad, rheologically weaker, NW-SE trending LN/EP mobile belt. Rayner-type crust likely continues further west, where it abuts along the SW-trending Forster Magnetic Anomaly. The latter is interpreted as a suture, which separates typical Grenville-age crust of the Maud Belt to the W from Rayner-age crust to the E. The study area has therefore clearly Indian affinities. Its juvenile character with a lack of metamorphic overprint at the end of crust formation could point to an accretionary history along this part of the Indian segment of Rodinia, immediately following final Rodinia assembly.

Seat belt use to save face: impact on drivers' body region and nature of injury in motor vehicle crashes.

PubMed

Han, Guang-Ming; Newmyer, Ashley; Qu, Ming

2015-01-01

Seat belt use is the single most effective way to save lives and reduce injuries in motor vehicle crashes. However, some case reports described seat belt use as a double-edged sword because some injuries are related to seat belt use in motor vehicle crashes. To comprehensively understand the effects of seat belt use, we systemically investigated the association between seat belt use and injuries based on anatomic body region and type of injury in drivers involved in motor vehicle crashes. The injury information was obtained by linking crash reports with hospital discharge data and categorized by using the diagnosis codes based on the Barell injury diagnosis matrix. A total of 10,479 drivers (≥15 years) in passenger vehicles involved in motor vehicle crashes from 2006 to 2011 were included in this study. Seat belt use significantly reduced the proportions of traumatic brain injury (10.4% non-seat belt; 4.1% seat belt) and other head, face, and neck injury (29.3% non-seat belt; 16.6% seat belt) but increased the proportion of spine: thoracic to coccyx injury (17.9% non-seat belt; 35.5% seat belt). Although the proportion of spine: thoracic to coccyx injury was increased in drivers with seat belt use, the severity of injury was decreased, such as fracture (4.2% with seat belt use; 22.0% without seat belt use). Furthermore, the total medical charges decreased due to the change of injury profiles in drivers with seat belt use from a higher percentage of fractures (average cost for per case $26,352) to a higher percentage of sprains and/or strains ($1,897) with spine: thoracic to coccyx injury. This study provide a comprehensive picture for understanding the protective effect of seat belt use on injuries based on anatomic body region and type of injury in drivers involved in motor vehicle crashes.

Coordinative structuring of gait kinematics during adaptation to variable and asymmetric split-belt treadmill walking - A principal component analysis approach.

PubMed

Hinkel-Lipsker, Jacob W; Hahn, Michael E

2018-06-01

Gait adaptation is a task that requires fine-tuned coordination of all degrees of freedom in the lower limbs by the central nervous system. However, when individuals change their gait it is unknown how this coordination is organized, and how it can be influenced by contextual interference during practice. Such knowledge could provide information about measurement of gait adaptation during rehabilitation. Able-bodied individuals completed an acute bout of asymmetric split-belt treadmill walking, where one limb was driven at a constant velocity and the other according to one of three designed practice paradigms: serial practice, where the variable limb belt velocity increased over time; random blocked practice, where every 20 strides the variable limb belt velocity changed randomly; random practice, where every stride the variable limb belt velocity changed randomly. On the second day, subjects completed one of two different transfer tests; one with a belt asymmetry close to that experienced on the acquisition day (transfer 1; 1.5:1), and one with a greater asymmetry (transfer 2; 2:1) . To reduce this inherently high-dimensional dataset, principal component analyses were used for kinematic data collected throughout the acquisition and transfer phases; resulting in extraction of the first two principal components (PCs). For acquisition, PC1 and PC2 were related to sagittal and frontal plane control. For transfer 1, PC1 and PC2 were related to frontal plane control of the base of support and whole-body center of mass. For transfer 2, PC1 did not have any variables with high enough coefficients deemed to be relevant, and PC2 was related to sagittal plane control. Observations of principal component scores indicate that variance structuring differs among practice groups during acquisition and transfer 1, but not transfer 2. These results demonstrate the main kinematic coordinative structures that exist during gait adaptation, and that control of sagittal plane and frontal plane motion are perhaps a trade-off during acquisition of a novel asymmetric gait pattern. Copyright © 2018 Elsevier B.V. All rights reserved.

[Effects of human engineering activities on permafrost active layer and its environment in northern Qinghai-Tibetan plateau].

PubMed

Guo, Zhenggang; Wu, Qingbo; Niu, Fujun

2006-11-01

With disturbed and undisturbed belts during the construction of Qinghai-Tibet highway as test objectives, this paper studied the effects of human engineering activities on the permafrost ecosystem in northern Qinghai-Tibetan plateau. The results showed that the thickness of permafrost active layer was smaller in disturbed than in undisturbed belt, and decreased with increasing altitude in undisturbed belt while no definite pattern was observed in disturbed belt. Different vegetation types had different effects on the thickness of permafrost active layer, being decreased in the order of steppe > shrub > meadow. In the two belts, altitude was the main factor affecting the vertical distribution of soil moisture, but vegetation type was also an important affecting factor if the altitude was similar. Due to the human engineering activities, soil temperature in summer was lower in disturbed than in undisturbed belt.

Anomalous heat flow belt along the continental margin of Brazil

NASA Astrophysics Data System (ADS)

Hamza, Valiya M.; Vieira, Fabio P.; Silva, Raquel T. A.

2018-01-01

A comprehensive analysis of thermal gradient and heat flow data was carried out for sedimentary basins situated in the continental margin of Brazil (CMB). The results point to the existence of a narrow belt within CMB, where temperature gradients are higher than 30 °C/km and the heat flow is in excess of 70 mW/m2. This anomalous geothermal belt is confined between zones of relatively low to normal heat flow in the adjacent continental and oceanic regions. The width of the belt is somewhat variable, but most of it falls within the range of 100-300 km. The spatial extent is relatively large in the southern (in the basins of Pelotas, Santos and Campos) and northern (in the basins of Potiguar and Ceará) parts, when compared with those in the central parts (in the basins of South Bahia, Sergipe and Alagoas). The characteristics of heat flow anomalies appear to be compatible with those produced by thermal sources at depths in the lower crust. Hence, magma emplacement at the transition zone between lower crust and upper mantle is considered the likely mechanism producing such anomalies. Seismicity within the belt is relatively weak, with focal depths less than 10 km for most of the events. Such observations imply that "tectonic bonding" between continental and oceanic segments, at the transition zone of CMB, is relatively weak. Hence, it is proposed that passive margins like CMB be considered as constituting a type of plate boundary that is aseismic at sub-crustal levels, but allows for escape of significant amounts of earth's internal heat at shallow depths.

A comparison of safety belt use between commercial and noncommercial light-vehicle occupants.

PubMed

Eby, David W; Fordyce, Tiffani A; Vivoda, Jonathon M

2002-05-01

The purpose of this study was to conduct an observational survey of safety belt use to determine the use rate of commercial versus noncommercial light-vehicle occupants. Observations were conducted on front-outboard vehicle occupants in eligible commercial and noncommercial vehicles in Michigan (i.e.. passenger cars, vans/minivans, sport-utility vehicles, and pickup trucks). Commercial vehicles that did not fit into one of the four vehicle type categories, such as tractor-trailers, buses, or heavy trucks, were not included in the survey. The study found that the restraint use rate for commercial light-vehicle occupants was 55.8% statewide. The statewide safety belt use rate for commercial light-vehicles was significantly lower than the rate of 71.2% for noncommercial light-vehicles. The safety belt use rate for commercial vehicles was also significantly different as a function of region, vehicle type, seating position, age group, and road type. The results provide important preliminary data about safety belt use in commercial versus noncommercial light-vehicles and indicate that further effort is needed to promote safety belt use in the commercial light-vehicle occupant population. The study also suggests that additional research is required in order to develop effective programs that address low safety belt use in the commercial light-vehicle occupant population.

Paired Magmatic-Metallogenic Belts in Myanmar - an Andean Analogue?

NASA Astrophysics Data System (ADS)

Gardiner, Nicholas; Robb, Laurence; Searle, Michael; Morley, Christopher

2015-04-01

Myanmar (Burma) is richly endowed in precious and base metals, having one of the most diverse collections of natural resources in SE Asia. Its geological history is dominated by the staged closing of Tethys and the suturing of Gondwana-derived continental fragments onto the South China craton during the Mesozoic-Cenozoic. The country is located at a crucial geologic juncture where the main convergent Tethyan collision zone swings south around the Namche Barwa Eastern Himalayan syntaxis. However, despite recent work, the geological and geodynamic history of Myanmar remains enigmatic. Plate margin processes, magmatism, metasomatism and the genesis of mineral deposits are intricately linked, and there has long been recognized a relationship between the distribution of certain mineral deposit types, and the tectonic settings which favour their genesis. A better knowledge of the regional tectonic evolution of a potential exploration jurisdiction is therefore crucial to understanding its minerals prospectivity. This strong association between tectonics and mineralization can equally be applied in reverse. By mapping out the spatial, and temporal, distribution of presumed co-genetic mineral deposits, coupled with an understanding of their collective metallogenetic origin, a better appreciation of the tectonic evolution of a terrane may be elucidated. Identification and categorization of metallotects within a geodynamically-evolving terrane thus provides a complimentary tool to other methodologies (e.g. geochemical, geochronological, structural, geophysical, stratigraphical), for determining the tectonic history and inferred geodynamic setting of that terrane through time. Myanmar is one such study area where this approach can be undertaken. Here are found two near-parallel magmatic belts, which together contain a significant proportion of that country's mineral wealth of tin, tungsten, copper, gold and silver. Although only a few 100 km's apart, these belts exhibit a contrasting minerals endowment. The Mogok-Mandalay-Mergui (MMM) Belt hosts crustal-melt S-type granites with significant tin-tungsten mineralization, and contains the historically major tungsten deposit of Mawchi. The Wuntho-Popa Arc comprises I-type granites and granodiorites with porphyry-type copper-gold and epithermal gold mineralization, and includes the world-class Monywa copper mine. Recent U-Pb radiometric age dating has shown the potential for the two belts to be both active from the Late Cretaceous to Eocene. The spatial juxtaposition of these two sub-parallel belts, the implication of contemporary magmatism, and their distinct but consistent metallogenic endowment bears strong similarities to the metallogenic belts of the South American Cordillera. Here we investigate whether they together represent the magmatic and metallogenic expression of an Andean-type setting in Myanmar during the subduction of Neo-Tethys. In this analogue the Wuntho-Popa Arc represents a proximal I-type magmatic belt sited immediately above the eastwards-verging Neo-Tethys subduction zone. Exhibiting porphyry-type copper-gold and epithermal gold mineralization, this would therefore be the Myanmar equivalent of the Andean coastal copper belts. Conversely, the parallel MMM Belt, comprised of more distal crustal-melt S-type tin granites, would have an analogue in the Bolivian tin belt.

Assessing the Time Variability of Jupiter's Tropospheric Properties from 1996 to 2011

NASA Technical Reports Server (NTRS)

Orton, G. S.; Fletcher, L. N.; Yanamandra-Fisher, P. A.; Simon-Miller, A. A.; Greco, J.; Wakefield, L.

2012-01-01

We acquired and analyzed mid-infrared images of Jupiter's disk at selected wavelengths from NASA's Infrared Telescope Facility (IRTF) from 1996 to 2011, including a period of large-scale changes of cloud color and albedo. We derived the 100-300 mbar temperature structure, together with tracers of vertical motion: the thickness of a 600- mbar cloud layer, the 300-mbar abundance of the condensable gas NH3, and the 400- mbar para- vs. ortho-H2 ratio. The biggest visual change was detected in the normally dark South Equatorial Belt (SEB) that 'faded' to a light color in 2010, during which both cloud thickness and NH3 abundance rose; both returned to their pre-fade levels in 2011, as the SEB regained its normal dark color. The cloud thickness in Jupiter's North Temperate Belt (NTB) increased in 2002, coincident with its visible brightening, and its NH3 abundance spiked in 2002-2003. Jupiter's Equatorial Zone (EZ), a region marked by more subtle but widespread color and albedo change, showed high cloud thickness variability between 2007 and 2009. In Jupiter's North Equatorial Belt (NEB), the cloud thickened in 2005, then slowly decreased to a minimum value in 2010-2011. No temperature variations were associated with any of these changes, but we discovered temperature oscillations of approx.2-4 K in all regions, with 4- or 8-year periods and phasing that was dissimilar in the different regions. There was also no detectable change in the para- vs. ortho-H2 ratio over time, leading to the possibility that it is driven from much deeper atmospheric levels and may be time-invariant. Our future work will continue to survey the variability of these properties through the Juno mission, which arrives at Jupiter in 2016, and to connect these observations with those made using raster-scanned images from 1980 to 1993 (Orton et al. 1996 Science 265, 625).

30 CFR 75.1101 - Deluge-type water sprays, foam generators; main and secondary belt-conveyor drives.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Deluge-type water sprays, foam generators; main... Fire Protection § 75.1101 Deluge-type water sprays, foam generators; main and secondary belt-conveyor drives. [Statutory Provisions] Deluge-type water sprays or foam generators automatically actuated by rise...

30 CFR 75.1101 - Deluge-type water sprays, foam generators; main and secondary belt-conveyor drives.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Deluge-type water sprays, foam generators; main... Fire Protection § 75.1101 Deluge-type water sprays, foam generators; main and secondary belt-conveyor drives. [Statutory Provisions] Deluge-type water sprays or foam generators automatically actuated by rise...

Biomechanical considerations for abdominal loading by seat belt pretensioners.

PubMed

Rouhana, Stephen W; El-Jawahri, Raed E; Laituri, Tony R

2010-11-01

While seat belts are the most effective safety technology in vehicles today, there are continual efforts in the industry to improve their ability to reduce the risk of injury. In this paper, seat belt pretensioners and current trends towards more powerful systems were reviewed and analyzed. These more powerful systems may be, among other things, systems that develop higher belt forces, systems that remove slack from belt webbing at higher retraction speeds, or both. The analysis started with validation of the Ford Human Body Finite Element Model for use in evaluation of abdominal belt loading by pretensioners. The model was then used to show that those studies, done with lap-only belts, can be used to establish injury metrics for tests done with lap-shoulder belts. Then, previously-performed PMHS studies were used to develop AIS 2+ and AIS 3+ injury risk curves for abdominal interaction with seat belts via logistic regression and reliability analysis with interval censoring. Finally, some considerations were developed for a possible laboratory test to evaluate higher-powered pretensioners.

Design study of steel V-Belt CVT for electric vehicles

NASA Technical Reports Server (NTRS)

Swain, J. C.; Klausing, T. A.; Wilcox, J. P.

1980-01-01

A continuously variable transmission (CVT) design layout was completed. The intended application was for coupling the flywheel to the driveline of a flywheel battery hybrid electric vehicle. The requirements were that the CVT accommodate flywheel speeds from 14,000 to 28,000 rpm and driveline speeds of 850 to 5000 rpm without slipping. Below 850 rpm a slipping clutch was used between the CVT and the driveline. The CVT was required to accommodate 330 ft-lb maximum torque and 100 hp maximum transient. The weighted average power was 22 hp, the maximum allowable full range shift time was 2 seconds and the required lift was 2600 hours. The resulting design utilized two steel V-belts in series to accommodate the required wide speed ratio. The size of the CVT, including the slipping clutch, was 20.6 inches long, 9.8 inches high and 13.8 inches wide. The estimated weight was 155 lb. An overall potential efficiency of 95 percent was projected for the average power condition.

Fore and aft elastic response characteristics of 34 x 9.9, type 7, 14 ply-rating aircraft tires of bias-ply, bias-belted, and radial-belted design. M.S. Thesis - George Washington Univ., May 1973; [static and rolling tests on dry concrete pavements

NASA Technical Reports Server (NTRS)

Tanner, J. A.

1974-01-01

An investigation was conducted to determine the fore-and-aft elastic response characteristics of 34 x 9.9, type VII, 14 ply-rating aircraft tires of bias-ply, bias-belted, and radial-belted design. The investigation consisted of static and rolling tests on dry concrete pavements at the Langley aircraft landing loads and traction facility; statistical techniques which related the measured tire elastic characteristics to variations in the vertical load, inflation pressure, braking force and/or tire vertical deflection; and a semiempirical analysis which related the tire elastic behavior to measured wheel slippage during steady-state braking. The bias-belted tire developed the largest spring constant value for most loading conditions; the radial-belted tire, the smallest. The elastic response of the tire free periphery to static braking included both tread stretch and carcass torsional wind-up about the axle for the bias-ply and bias-belted tires and carcass wind-up alone for the radial-belted tire.

Clear-Water Contraction Scour at Selected Bridge Sites in the Black Prairie Belt of the Coastal Plain in Alabama, 2006

USGS Publications Warehouse

Lee, K.G.; Hedgecock, T.S.

2008-01-01

The U.S. Geological Survey, in cooperation with the Alabama Department of Transportation, made observations of clear-water contraction scour at 25 bridge sites in the Black Prairie Belt of the Coastal Plain of Alabama. These bridge sites consisted of 54 hydraulic structures, of which 37 have measurable scour holes. Observed scour depths ranged from 1.4 to 10.4 feet. Theoretical clear-water contraction-scour depths were computed for each bridge and compared with observed scour. This comparison showed that theoretical scour depths, in general, exceeded the observed scour depths by about 475 percent. Variables determined to be important in developing scour in laboratory studies along with several other hydraulic variables were investigated to understand their influence within the Alabama field data. The strongest explanatory variables for clear-water contraction scour were channel-contraction ratio and velocity index. Envelope curves were developed relating both of these explanatory variables to observed scour. These envelope curves provide useful tools for assessing reasonable ranges of scour depth in the Black Prairie Belt of Alabama.

New geological and tectonic map of Paleoproterozoic basement in western Burkina Faso: integrated interpretation of airborne geophysical and field data

NASA Astrophysics Data System (ADS)

Metelka, Vaclav; Baratoux, Lenka; Jessell, Mark; Naba, Seta

2010-05-01

The recent acquisition of regional scale airborne datasets over most of the West African craton sparked off a number of studies concentrating on their litho-tectonic interpretation. In such polydeformed terrains, where outcrop is very sparse or virtually nonexistent due to the presence of thick lateritic cover, geophysics and specifically geomagnetic surveying provide a wealth of information that facilitates the deciphering of regional litho-structural hierarchies. A revised geological and tectonic map of the Houndé and Boromo greenstone belts was derived by interpretation of aeromagnetic and gamma-ray spectrometric data constrained by field observations where available. Medium resolution geophysical data gridded at 250 meters acquired during the SYSMIN project served as a basis for the interpretation. This dataset was integrated with the SRTM digital elevation model and over 600 field observations. Furthermore, the BRGM/BUMIGEB SYSMIN project outcrops database (Castaing et al., 2003) as well as older outcrop maps, maintained by BUMIGEB, were used. Locally, outcrop maps and high resolution geophysics provided by mining companies (Orezone, SEMAFO, Volta Resources, Wega Mining) were employed. 2-D geophysical inversion modeling in GM-sys software using the ground gravity and airborne magnetic data was applied to three selected E-W profiles. Principal component analysis (PCA) of magnetic and radiometric data was a powerful tool for distinguishing different lithological units, in particular tholeiitic suites of basalts and gabbros and various volcano-sedimentary units. Some of the granite pluton limits can be traced as well using the PCA; however thick lateritic cover substantially hinders precise mapping. Magnetic data used on its own gave better results not only for granite limits but also for determining internal structures such as shear zones and concentric compositional zoning. Several major N-S to NNE-SSW oriented shear zones, representing most probably deep crustal structures were identified, some of them previously unreported. The western-most one runs through the eastern margin of the Banfora belt, continues eastwards through to Houndé belt and defines the northern limit of the Boromo belt. Regional stitches of airborne magnetic data at the craton scale show that this structure continues southeastwards to Liberia, attaining over 1000 km. Another shear zone, one of the newly discovered major structures, is NNW-SSE oriented and it affects granitoids between the Banfora and Houndé belts, joining the N-S trending shear zone limiting the Hounde belt in the west. Tarkwaian type metasediments occur as cca 400 km N-S oriented quasi-continuous unit located in the easterly part of the Houndé belt and they are limited on both eastern and western sides by regional scale shear zones. Finally, the Boromo belt is affected along all its length by a connected system of anastomosing subvertical shear zones, some of them representing the limit between the greenstone and granitoids. Additionally, tight isoclinal folds in the Houndé belt indicating E-W compression during the Eburnean orogeny are clearly visible on the PCA image. Interpreted structures are in a good accordance with the meso-scale structures measured in-situ. Castaing, C., Billa, M., Milési, J.P., Thiéblemont, D., Le Mentour, J., Egal, E., Donzeau, M. (BRGM) (coordonnateurs) et Guerrot, C., Cocherie, A., Chevremont, P., Tegyey, M., Itard, Y. (BRGM), Zida, B., Ouedraogo, I., Kote, S., Kabore, B.E., Ouedraogo, C. (BUMIGEB), Ki, J.C., Zunino (ANTEA), 2003. Notice explicative de la Carte géologique et miniére du Burkina Faso à 1/1 000 000.

Condition-Based Conveyor Belt Replacement Strategy in Lignite Mines with Random Belt Deterioration

NASA Astrophysics Data System (ADS)

Blazej, Ryszard; Jurdziak, Leszek

2017-12-01

In Polish lignite surface mines, condition-based belt replacement strategies are applied in order to assure profitable refurbishment of worn out belts performed by external firms specializing in belt maintenance. In two of three lignite mines, staff asses belt condition subjectively during visual inspections. Only one mine applies specialized diagnostic device (HRDS) allowing objective magnetic evaluation of belt core condition in order to choose the most profitable moment for the dismantling of worn out belt segments from conveyors and sending them to the maintenance firm which provides their refurbishment. This article describes the advantages of a new diagnostic device called DiagBelt. It was developed at the Faculty of Geoengineering, Mining and Geology, Wroclaw University of Science and Technology. Economic gains from its application are calculated for the lignite mine and for the belt maintenance firm, taking into account random life (durability) of new and reconditioned belts (after the 1st and the 2nd refurbishment). Recursive calculations for following years allow the estimation of the length and costs of replaced, reconditioned and purchased belts on an annual basis, while the use of the Monte Carlo method allows the estimation of their variability caused by random deterioration of belts. Savings are obtained due to better selection of moments (times) for the replacement of belt segments and die to the possibility to qualify worn out belts for refurbishment without the need to remove their covers. In effect, increased belt durability and lowered share of waste belts (which were not qualified for reconditioning) create savings which can quickly cover expenditures on new diagnostic tools and regular belt inspections in the mine.

REGIONALIZATION OF THE WESTERN CORN BELT PLAINS ECOREGION

EPA Science Inventory

As part of a larger effort to study the fate and transport of agrichemicals in the midwestern United States, the U.S. Environmental Protection Agency commissioned a study of spatial variability within the Western Corn Belt Plains ecoregion. he objective of this study was to syste...

Preliminary analysis of a downsized advanced gas-turbine engine in a subcompact car

NASA Technical Reports Server (NTRS)

Klann, J. L.; Johnsen, R. L.

1982-01-01

Relative fuel economy advantages exist for a ceramic turbine engine when it is downsized for a small car were investigated. A 75 kW (100 hp) single shaft engine under development was analytically downsized to 37 kW (50 hp) and analyzed with a metal belt continuously variable transmission in a synthesized car. With gasoline, a 25% advantage was calculated over that of a current spark ignition engine, scaled to the same power, using the same transmission and car. With diesel fuel, a 21% advantage was calculated over that of a similar diesel engine vehicle.

Seat belts are more effective than airbags in reducing thoracic aortic injury in frontal motor vehicle crashes.

PubMed

Brasel, Karen J; Quickel, Robert; Yoganandan, Narayan; Weigelt, John A

2002-08-01

Airbags reduce the probability of death in frontal collisions, but the effect is small compared with seat belts. Little is known about the influence of seat belts and airbags on the incidence of thoracic aortic injury (TAI). The National Automotive Sampling System database was queried for the years 1993 to 1998 to determine the impact of seat belts and airbags on the incidence of TAI in survivors of frontal motor vehicle crashes. Proportions were compared using the two-sample Z test. Seat belts prevent TAI regardless of airbag deployment. The effect of airbags is limited to those wearing seat belts. In frontal collisions without seat belt use, airbag deployment does not alter TAI incidence. Seat belts are considerably more effective in preventing TAI than airbags after frontal motor vehicle crashes. Prevention efforts should continue to emphasize the use of active restraints. Restraint use should be considered a risk factor in evaluating patients for potential TAI.

Radiation Belt Storm Probes: Resolving Fundamental Physics with Practical Consequences

NASA Technical Reports Server (NTRS)

Ukhorskiy, Aleksandr Y.; Mauk, Barry H.; Fox, Nicola J.; Sibeck, David G.; Grebowsky, Joseph M.

2011-01-01

The fundamental processes that energize, transport, and cause the loss of charged particles operate throughout the universe at locations as diverse as magnetized planets, the solar wind, our Sun, and other stars. The same processes operate within our immediate environment, the Earth's radiation belts. The Radiation Belt Storm Probes (RBSP) mission will provide coordinated two-spacecraft observations to obtain understanding of these fundamental processes controlling the dynamic variability of the near-Earth radiation environment. In this paper we discuss some of the profound mysteries of the radiation belt physics that will be addressed by RBSP and briefly describe the mission and its goals.

Fore-and-aft stiffness and damping characteristics of 30 x 11.5-14.5, Type VIII, bias-ply and radial-belted aircraft tires

NASA Technical Reports Server (NTRS)

Lopez, Mercedes C.; Davis, Pamela A.; Yeaton, Robert B.; Vogler, William A.

1988-01-01

Measurements of footprint geometrical properties and fore and aft stiffness and damping characteristics were obtained on 30 x 11.5-14.5 bias-ply and radial-belted aircraft tires. Significant differences in stiffness and damping characteristics were found between the two design types. The results show that footprint aspect ratio effects may interfere with the improved hydroplaning potential associated with the radial-belted tire operating at higher inflation pressures.

Characterization of airborne float coal dust emitted during continuous mining, longwall mining and belt transport

PubMed Central

Shahan, M.R.; Seaman, C.E.; Beck, T.W.; Colinet, J.F.; Mischler, S.E.

2017-01-01

Float coal dust is produced by various mining methods, carried by ventilating air and deposited on the floor, roof and ribs of mine airways. If deposited, float dust is re-entrained during a methane explosion. Without sufficient inert rock dust quantities, this float coal dust can propagate an explosion throughout mining entries. Consequently, controlling float coal dust is of critical interest to mining operations. Rock dusting, which is the adding of inert material to airway surfaces, is the main control technique currently used by the coal mining industry to reduce the float coal dust explosion hazard. To assist the industry in reducing this hazard, the Pittsburgh Mining Research Division of the U.S. National Institute for Occupational Safety and Health initiated a project to investigate methods and technologies to reduce float coal dust in underground coal mines through prevention, capture and suppression prior to deposition. Field characterization studies were performed to determine quantitatively the sources, types and amounts of dust produced during various coal mining processes. The operations chosen for study were a continuous miner section, a longwall section and a coal-handling facility. For each of these operations, the primary dust sources were confirmed to be the continuous mining machine, longwall shearer and conveyor belt transfer points, respectively. Respirable and total airborne float dust samples were collected and analyzed for each operation, and the ratio of total airborne float coal dust to respirable dust was calculated. During the continuous mining process, the ratio of total airborne float coal dust to respirable dust ranged from 10.3 to 13.8. The ratios measured on the longwall face were between 18.5 and 21.5. The total airborne float coal dust to respirable dust ratio observed during belt transport ranged between 7.5 and 21.8. PMID:28936001

Identifying Opportunities to Decrease Vehicle Occupant Fatalities : Traffic Tech

DOT National Transportation Integrated Search

2017-09-01

Seat belt use in the United States increased steadily in the last decade, but significant variability exists across the States. In 2014, State seat belt use ranged from a low of 68.9 percent to a high of 97.8 percent. Although higher use rates are ge...

Size and Albedo of Kuiper Belt Object 55636 from a Stellar Occultation

DTIC Science & Technology

2010-06-01

Santa Barbara, California 93117, USA. 10University of Hawai’i, Hilo , Hawai’i 96720-4091, USA. 11Department of Terrestrial Magnetism, Carnegie Institution...Jewitt, D. Hawaii Kuiper belt variability project: an update. Earth Moon Planets 92, 207–219 (2003). 11. Grundy, W., Noll, K. & Stephens, D

2014 safety belt usage survey in Kentucky.

DOT National Transportation Integrated Search

2014-08-01

The objective of the survey summarized in this report was to establish a statewide safety belt usage rate in Kentucky for 2014. This rate can be compared to those determined from previous surveys. The 2014 statewide survey continues to document the i...

Validity of a Smartphone-Based Fall Detection Application on Different Phones Worn on a Belt or in a Trouser Pocket.

PubMed

Vermeulen, Joan; Willard, Sarah; Aguiar, Bruno; De Witte, Luc P

2015-01-01

The objective of this study was to evaluate the sensitivity and specificity of a smartphone-based fall detection application when different smartphone models are worn on a belt or in a trouser pocket. Eight healthy adults aged between 18 and 24 years old simulated 10 different types of true falls, 5 different types of falls with recovery, and 11 daily activities, five consecutive times. Participants wore one smartphone in a pocket that was attached to their belt and another one in their trouser pocket. All smartphones were equipped with a built-in accelerometer and the fall detection application. Four participants tested the application on a Samsung S3 and four tested the application on a Samsung S3 mini. Sensitivity scores were .75 (Samsung S3 belt), .88 (Samsung S3 mini trouser pocket), and .90 (Samsung S3 mini belt/Samsung S3 trouser pocket). Specificity scores were .87 (Samsung S3 trouser pocket), .91 (Samsung S3 mini trouser pocket), .97 (Samsung S3 belt), and .99 (Samsung S3 mini belt). These results suggest that an application on a smartphone can generate valid fall alarms when worn on a belt or in a trouser pocket. However, sensitivity should be improved before implementation of the application in practice.

Ecological Speciation in Nolina parviflora (Asparagaceae): Lacking Spatial Connectivity along of the Trans-Mexican Volcanic Belt

PubMed Central

Ruiz-Sanchez, Eduardo; Specht, Chelsea D.

2014-01-01

The hypothesis of ecological speciation states that as populations diverge in different niches, reproductive isolation evolves as a by-product of adaptation to these different environments. In this context, we used Nolina parviflora as a model to test if this species evolved via ecological speciation and to explore current and historical gene flow among its populations. Nolina parviflora is a montane species endemic to Mexico with its geographical distribution restricted largely to the Trans-Mexican Volcanic Belt. This mountain range is one of the most complex geological regions in Mexico, having undergone volcanism from the mid-Miocene to the present. Ecologically, the Trans-Mexican Volcanic Belt possesses different types of vegetation, including tropical dry forest; oak, pine, pine-oak, and pine-juniper forests; and xerophytic scrub - all of which maintain populations of N. parviflora. Using species distribution models, climatic analyses, spatial connectivity and morphological comparisons, we found significant differences in climatic and morphological variables between populations of N. parviflora in two distinct Trans-Mexican Volcanic Belt regions (east vs. west). This could mean that the geographically isolated populations diverged from one another via niche divergence, indicating ecological speciation. Spatial connectivity analysis revealed no connectivity between these regions under the present or last glacial maximum climate models, indicating a lack of gene flow between the populations of the two regions. The results imply that these populations may encompass more than a single species. PMID:24905911

Ecological speciation in Nolina parviflora (Asparagaceae): lacking spatial connectivity along of the Trans-Mexican Volcanic Belt.

PubMed

Ruiz-Sanchez, Eduardo; Specht, Chelsea D

2014-01-01

The hypothesis of ecological speciation states that as populations diverge in different niches, reproductive isolation evolves as a by-product of adaptation to these different environments. In this context, we used Nolina parviflora as a model to test if this species evolved via ecological speciation and to explore current and historical gene flow among its populations. Nolina parviflora is a montane species endemic to Mexico with its geographical distribution restricted largely to the Trans-Mexican Volcanic Belt. This mountain range is one of the most complex geological regions in Mexico, having undergone volcanism from the mid-Miocene to the present. Ecologically, the Trans-Mexican Volcanic Belt possesses different types of vegetation, including tropical dry forest; oak, pine, pine-oak, and pine-juniper forests; and xerophytic scrub--all of which maintain populations of N. parviflora. Using species distribution models, climatic analyses, spatial connectivity and morphological comparisons, we found significant differences in climatic and morphological variables between populations of N. parviflora in two distinct Trans-Mexican Volcanic Belt regions (east vs. west). This could mean that the geographically isolated populations diverged from one another via niche divergence, indicating ecological speciation. Spatial connectivity analysis revealed no connectivity between these regions under the present or last glacial maximum climate models, indicating a lack of gene flow between the populations of the two regions. The results imply that these populations may encompass more than a single species.

Compositional structure of the asteroid belt

NASA Technical Reports Server (NTRS)

Gradie, J.; Tedesco, E.

1982-01-01

A variety of observations, mainly albedos derived from 10 and 20 micron radiometry and eight-filter broadband spectrophotometry, were used to show that the asteroid belt is highly structured in composition. The bias-corrected distribution from 1.8 to 5.2 A.U. of the previously defined compositional types C,S,E,R, and M, plus type D and the newly described types F and P, are reported on. In terms of the relative abundances of the types discussed, the asteroid belt appears to be composed of at least six major compositionally distinct regions. The inferred composition of the asteroids in each semimajor axis region is consistent with the theory that the asteroids accreted from the solar nebula at or near their present location.

49 CFR 392.16 - Use of seat belts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS DRIVING OF COMMERCIAL MOTOR VEHICLES Driving of Commercial Motor Vehicles § 392.16 Use of seat belts. A commercial motor vehicle which...

Extreme enhancements and depletions of relativistic electrons in Earth's radiation belts

NASA Astrophysics Data System (ADS)

Turner, D. L.; Claudepierre, S. G.; O'Brien, T. P., III; Fennell, J. F.; Blake, J. B.; Baker, D. N.; Jaynes, A. N.; Morley, S.; Geoffrey, R.

2015-12-01

Earth's electron radiation belts consist of toroidal zones in near-Earth space characterized by intense levels of relativistic electrons with distinct energy-dependent boundaries. It has been known for decades that the outer electron radiation belt is highly variable, with electron intensities varying by orders of magnitude on timescales ranging from minutes to years. Now, we are gaining much insight into the nature of this extreme variability thanks to the unprecedented number of observatories capable of measuring radiation belt electrons, the most recent of which is NASA's Van Allen Probes mission. In this presentation, we analyze and review several of the most extreme events observed in Earth's outer radiation belt. We begin with very sudden and strong enhancements of the outer radiation belt that can result in several orders of magnitude enhancements of electron intensities up to several MeV that sometimes occur in less than one day. We compare and contrast two of the most extreme cases of sudden and strong enhancements from the Van Allen Probes era, 08-09 October 2012 and 17-18 March 2015, and review evidence of the dominant acceleration mechanism in each event. Sudden enhancements of the radiation belts can also occur from injections by interplanetary shocks impacting the magnetosphere, such as occurred on 24 March 1991. We compare shock characteristics from previous injection events to those from the Van Allen Probes era to investigate why none of the interplanetary shocks since September 2012 have caused MeV electron injections into the slot region and inner radiation belt, which has surprisingly been devoid of measurable quantities of >~1 MeV electrons throughout the Van Allen Probes era. Our last topic concerns loss processes. We discuss drastic loss events, known as "flux dropouts", and present evidence that these loss events can eliminate the vast majority of relativistic electrons in the outer radiation belt on time scales of only a few hours. We finish with cases of prolonged outer belt depletions, such as occurred throughout most of 2009 and in September 2014, and discuss how these can result from flux dropout events combined with a subsequent lack of any source of new relativistic electrons.

Lithospheric buckling and far-foreland deformation during the Laramide and Appalachian orogenies

NASA Astrophysics Data System (ADS)

Tikoff, B.; Siddoway, C. S.

2017-12-01

Major intraplate tectonics within North America (Laurentia) occurs during times of major orogenesis along the plate margins. During mountain building, typical structures of the hinterland are an orogenic plateau and fold-and-thrust belts, while in the far foreland (intraplate) areas long-wavelength ( 200 km or longer) folds and fault-reactivation features form. Long-wavelength folds are evident in both the Appalachian and Laramide orogenic forelands, with the stratigraphy recording the timing of the uplift. This contribution examines the model of lithospheric buckling - periodic folding associated with a horizontal endload on the edge of the plate - based on scaled, physical experiments and corroborated by numerical models. The Laramide (75-55 Ma) intraplate orogen in the classical location in Wyoming contains basement-cored arches spaced 200 km apart, for which the mechanism of uplift is questioned. Seismic evidence obtained for the Bighorn uplift, Wyoming, obtained by the EarthScope Bighorn project, shows an upwarp of the Moho beneath, but oblique to the trend of the surface exposure of the basement arch. Both the surface and Moho exhibit approximately the same structural relief. The seismic data exhibit no evidence for a regionally continuous decollement, nor is there evidence of rotation of structural markers within these features, of the type that is observed in the detached fold-and-thrust belt. The intraplate region affected by long-wavelength folding includes western Wyoming, with continuation of some features across the E-W-oriented Cheyenne belt (e.g., Rock Springs-Douglas Creek arch), Colorado Plateau, and High Plains east of the Rocky Mountains, where surface and subsurface structures display a series of anticlinal arches ("plains-type" folds). Appalachian mountain building also caused long-wavelength folding, with a spacing consistent with lithospheric buckling, mostly associated with the Devonian Acadian orogeny. The Laramide arches in the High Plains seem to occur on arches inherited from the Appalachian orogeny, suggesting the permanence of these lithospheric buckles once they have formed.

A comparison of muscle activation between back squats and belt squats.

PubMed

Evans, Thomas W; McLester, Cherilyn N; Howard, Jonathan H; McLester, John R; Calloway, Jimmy P

2017-06-08

A machine belt squat is a piece of equipment designed to allow the performance of squats while loading weight on the lifter's hips using a belt. The purpose of this investigation was to determine if belt squats differ from back squats in activation of the primary movers, and to determine the predictive capabilities of back squat load, training status, and anthropometric data on belt squat load. Thirty-one participants (16 males and 15 females) completed anthropometric measurements, a demographic questionnaire, a familiarization visit, and two testing visits, completing a 5 repetition maximum test for back squat and belt squat. Surface electromyography was used to measure muscle activation for the left and right vastus medialis (VMO), vastus lateralis (VLO), rectus femoris (RF), and gluteus maximus (GM). Comparison of muscle activation between the two exercises showed significant differences in the left GM (back squat: 0.84 ± 0.45, belt squat: 0.69 ± 0.22, p=0.015) and right GM (back squat: 0.86 ± 0.45, belt squat: 0.71 ± 0.29, p=0.004). Regression analysis computed significant prediction equations for belt squat load for general population, males, females, and advanced lifters. Overall, results indicate that belt squats may significantly differ in GM activation from back squats. Back squat load, as well as other variables, may be effective in accurately estimating appropriate belt squat load. These findings may help to more appropriately program for training with machine belt squats as a back squat alternative.

A new interpretation for the interference zone between the southern Brasília belt and the central Ribeira belt, SE Brazil

NASA Astrophysics Data System (ADS)

Trouw, Rudolph A. J.; Peternel, Rodrigo; Ribeiro, Andre; Heilbron, Mônica; Vinagre, Rodrigo; Duffles, Patrícia; Trouw, Camilo C.; Fontainha, Marcos; Kussama, Hugo H.

2013-12-01

In southeastern Brazil, the Neoproterozoic NNW-SSE trending southern Brasília belt is apparently truncated by the ENE-WSW central Ribeira belt. Different interpretations in the literature of the transition between these two belts motivated detailed mapping and additional age dating along the contact zone. The result is a new interpretation presented in this paper. The southern Brasília belt resulted from E-W collision between the active margin of the Paranapanema paleocontinent, on the western side, now forming the Socorro-Guaxupé Nappe, with the passive margin of the São Francisco paleocontinent on the eastern side. The collision produced an east vergent nappe stack, the Andrelândia Nappe System, along the suture. At its southern extreme the Brasília belt was thought to be cut off by a shear zone, the "Rio Jaguari mylonites", at the contact with the Embu terrane, pertaining to the Central Ribeira belt. Our detailed mapping revealed that the transition between the Socorro-Guaxupé Nappe (Brasília belt) and the Embu terrane (Ribeira belt) is not a fault but rather a gradational transition that does not strictly coincide with the Rio Jaguari mylonites. A typical Cordilleran type magmatic arc batholith of the Socorro-Guaxupé Nappe with an age of ca. 640 Ma intrudes biotite schists of the Embu terrane and the age of zircon grains from three samples of metasedimentary rocks, one to the south, one to the north and one along the mylonite zone, show a similar pattern of derivation from a Rhyacian source area with rims of 670-600 Ma interpreted as metamorphic overgrowth. We dated by LA-MC-ICPMS laser ablation (U-Pb) zircon grains from a calc-alkaline granite, the Serra do Quebra-Cangalha Batholith, located within the Embu terrane at a distance of about 40 km south of the contact with the Socorro Nappe, yielding an age of 680 ± 13 Ma. This age indicates that the Embu terrane was part of the upper plate (Socorro-Guaxupé Nappe) by this time. Detailed mapping indicates that the mylonite zone is not a plate boundary because motion along it is maximum a few tens of kilometres and the same litho-stratigraphic units are present on either side. Based on these arguments, the new interpretation is that the Embu terrane is the continuation of the Socorro-Guaxupé Nappe and therefore also part of the active margin of the Paranapanema paleocontinent. The Brasília belt is preserved even further within the central Ribeira belt than previously envisaged.

The Late Paleozoic magmatic evolution of the Aqishan-Yamansu belt, Eastern Tianshan: Constraints from geochronology, geochemistry and Sr-Nd-Pb-Hf isotopes of igneous rocks

NASA Astrophysics Data System (ADS)

Zhao, Liandang; Chen, Huayong; Zhang, Li; Zhang, Weifeng; Yang, Juntao; Yan, Xuelu

2018-03-01

The Aqishan-Yamansu belt in the Eastern Tianshan (Xinjiang, NW China) is an important mineralization belt. The belt mainly comprises Carboniferous volcanic, volcaniclastic and clastic rocks, and hosts many intermediate-felsic intrusions and Fe (-Cu) deposits. The biotite diorite, felsic brecciated tuff, granodiorite and syenite from the western Aqishan-Yamansu belt are newly zircon U-Pb dated to be 316.7 ± 1.4 Ma, 315.6 ± 2.6 Ma, 305.8 ± 1.9 Ma and 252.5 ± 1.4 Ma, respectively. The mafic rocks (mafic brecciated tuff and diabase porphyry) are tholeiitic to calc-alkaline series, LILE-rich (e.g., Rb, Ba and Pb), HFSE-depleted (e.g., Nb and Ta), and have high Mg#(44-60), Nb/Ta (15.0-20.0), Ba/La (>30) and Ba/Nb (>57) values/ratios, and low Th/Yb ratios (<1), probably originating from mantle wedge metasomatized by slab-derived fluids. The intermediate-felsic igneous rocks are LILE-rich, HFSE-depleted, with high Sr and Y contents showing typical of normal arc magma affinity. Moreover, the depleted εHf(t) (>2.10) and positive εNd(t) (>5.7), combined with variable Nb/Ta ratios (9.52-21.4), Y/Nb ratios (1.47-39.7) and Pb isotopes (206Pb/204Pb = 16.225-17.640, 207Pb/204Pb = 15.454-15.520, 208Pb/204Pb = 37.097-38.025) suggest that these rocks were magma mixing products between juvenile crustal-derived magmas and minor mantle-derived magmas. Combined published works with our new ages, geochemical and isotopic data, we propose that the Aqishan-Yamansu belt was an Early Carboniferous fore-arc basin during the southward subduction of the Kangguer oceanic slab beneath the Yili-Central Tianshan block. With the continuing southward subduction, the Aqishan-Yamansu fore-arc basin initiated to close, which generated the mafic and intensive intermediate-felsic magmatism associated with regional Fe (-Cu) mineralization.

Laboratory Reconstructions of Real World Frontal Crash Configurations using the Hybrid III and THOR Dummies and PMHS.

PubMed

Petitjean, Audrey; Lebarbe, Matthieu; Potier, Pascal; Trosseille, Xavier; Lassau, Jean-Pierre

2002-11-01

Load-limiting belt restraints have been present in French cars since 1995. An accident study showed the greater effectiveness in thorax injury prevention using a 4 kN load limiter belt with an airbag than using a 6 kN load limiter belt without airbag. The criteria for thoracic tolerance used in regulatory testing is the sternal deflection for all restraint types, belt and/or airbag restraint. This criterion does not assess the effectiveness of the restraint 4 kN load limiter belt with airbag observed in accidentology. To improve the understanding of thoracic tolerance, frontal sled crashes were performed using the Hybrid III and THOR dummies and PMHS. The sled configuration and the deceleration law correspond to those observed in the accident study. Restraint conditions evaluated are the 6 kN load-limiting belt and the 4 kN load-limiting belt with an airbag. Loads between the occupant and the sled environment were recorded. Various measurements (including thoracic deflections and head, thorax and pelvis accelerations and angular velocities on the dummies) characterize the dummy and PMHS behavior. PMHS anthropometry and injuries were noted. This study presents the test methodology and the results used to evaluate dummy ability to discriminate both restraint types and dummy measurement ability to be representative of thoracic injury risk for all restraint types. The injury results of the PMHS tests showed the same tendency as the accident study. Some of the criteria proposed in the literature did not show a better protection of the 4 kN load limiter belt with airbag restraint, in particular thoracic deflection maxima for both dummies. The four thoracic deflections measured on the THOR and Hybrid III dummies may allow more accurate analysis of the loading pattern and therefore of injury risk.

Boron-rich mud volcanoes of the Black Sea region: Modern analogues to ancient sea-floor tourmalinites associated with Sullivan-type Pb-Zn deposits?

NASA Astrophysics Data System (ADS)

Slack, John F.; Turner, Robert J. W.; Ware, Paul L. G.

1998-05-01

Large submarine mud volcanoes in the abyssal part of the Black Sea south of the Crimean Peninsula are similar in many respects to synsedimentary mud volcanoes in the Mesoproterozoic Belt-Purcell basin. One of the Belt-Purcell mud volcanoes directly underlies the giant Sullivan Pb-Zn-Ag deposit in southeastern British Columbia. Footwall rocks to the Sullivan deposit comprise variably tourmalinized siltstone, conglomerate, and related fragmental rock; local thin pyrrhotite-rich and spessartine-quartz beds are interpreted as Fe and Fe-Mn exhalites, respectively. Analogous Fe- and Mn-rich sediments occur near the abyssal Black Sea mud volcanoes. Massive pyrite crusts and associated carbonate chimneys discovered in relatively shallow waters (˜200 m depth) west of the Crimean Peninsula indicate an active sea-floor hydrothermal system. Subaerial mud volcanoes on the Kerch and Taman Peninsulas (˜100 km north of the abyssal mud volcanoes) contain saline thermal waters that locally have very high B contents (to 915 mg/L). These data suggest that tourmalinites might be forming in or near submarine Black Sea mud volcanoes, where potential may also exist for Sullivan-type Pb-Zn mineralization.

Boron-rich mud volcanoes of the Black Sea region: modern analogues to ancient sea-floor tourmalinites associated with Sullivan-type Pb-Zn deposits?

USGS Publications Warehouse

Slack, J.F.; Turner, R.J.W.; Ware, P.L.G.

1998-01-01

Large submarine mud volcanoes in the abyssal part of the Black Sea south of the Crimean Peninsula are similar in many respects to synsedimentary mud volcanoes in the Mesoproterozoic Belt-Purcell basin. One of the Belt-Purcell mud volcanoes directly underlies the giant Sullivan Pb-Zn-Ag deposit in southeastern British Columbia. Footwall rocks to the Sullivan deposit comprise variably tourmalinized siltstone, conglomerate, and related fragmental rock; local thin pyrrhotite-rich and spessartine-quartz beds are interpreted as Fe and Fe-Mn exhalites, respectively. Analogous Fe- and Mn-rich sediments occur near the abyssal Black Sea mud volcanoes. Massive pyrite crusts and associated carbonate chimneys discovered in relatively shallow waters (~200 m depth) west of the Crimean Peninsula indicate an active sea-floor-hydrothermal system. Subaerial mud volcanoes on the Kerch and Taman Peninsulas (~100 km north of the abyssal mud volcanoes) contain saline thermal waters that locally have very high B contents (to 915 mg/L). These data suggest that tourmalinites might be forming in or near submarine Black Sea mud volcanoes, where potential may also exist for Sullivan-type Pb-Zn mineralization.

33 CFR 142.42 - Safety belts and lifelines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety belts and lifelines. 142.42 Section 142.42 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES WORKPLACE SAFETY AND HEALTH Personal Protective Equipment...

33 CFR 142.42 - Safety belts and lifelines.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Safety belts and lifelines. 142.42 Section 142.42 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES WORKPLACE SAFETY AND HEALTH Personal Protective Equipment...

A Laboratory Impact Study of Simulated Edgeworth-Kuiper Belt Objects

NASA Astrophysics Data System (ADS)

Ryan, Eileen V.; Davis, Donald R.; Giblin, Ian

1999-11-01

This paper reports on a series of laboratory impact experiments designed to provide basic data on how simulated Edgeworth-Kuiper belt objects (EKOs) fragment in an impact event. In September-October 1997 we carried out 20 low-velocity airgun shots at the Ames Vertical Gun Range into porous and homogeneous ice spheres using aluminum, fractured ice, and solid ice projectiles. We found that the porous ice targets behaved as strongly as solid ice in collision. Energy is apparently well dissipated by the void spaces within the target, such that these fragile ice structures respond as if they were strong in impacts. Therefore, it would appear that if EKOs are porous, they are not collisionally weak. Also, our data show that collisional outcomes for low-velocity impacts into ice targets depend on the type of projectile used as well as the properties of the target. We observed that the degree of fragmentation for a given type of target increases as the strength of the projectile increases. Aluminum projectiles are far more damaging to the target at the same collisional energy than are solid ice projectiles, which, in turn, are more damaging than fractured ice projectiles. One possible explanation for this behavior is the variable depth of penetration of the projectile for the different cases—stronger projectiles penetrate more deeply and couple more energy into the target than do weak projectiles. Based on this, if we assume that there has not been significant heating or differentiation in the Edgeworth-Kuiper (E-K) belt, the most applicable impact strength for the low-velocity E-K belt collisions is likely to be that derived from similar target/projectile materials impacting each other. The laboratory data from this analysis indicate that a value for impact strength>5×10 5 erg/cm 3 is appropriate for porous ice targets impacted with solid/porous ice projectiles.

Seat belt and mobile phone use among vehicle drivers in the city of Doha, Qatar: an observational study.

PubMed

Mahfoud, Ziyad R; Cheema, Sohaila; Alrouh, Hekmat; Al-Thani, Mohammed Hamad; Al-Thani, Al Anoud Mohammed; Mamtani, Ravinder

2015-09-22

In Qatar traffic injuries and fatalities are of serious concern. Mobile phone use whilst driving has been associated with increased risk of vehicular collisions and injuries. Seat belt use has been demonstrated to save lives and reduce the severity of road traffic injuries. Whereas previously published studies may have looked at all front passengers, this study aims to obtain reliable estimates of the prevalence of seat belt and mobile phone use among vehicle drivers in the city of Doha, Qatar. Additionally, we aim to investigate the association of these behaviors with other variables namely gender, time of the day and type of vehicle. An observational study on 2,011 vehicles was conducted in 2013. Data were collected at ten sites within Doha city over a two-week period. Two trained observers surveyed each car and recorded observations on a data collection form adapted from a form used in a 2012 Oklahoma observational study. Associations were assessed using the Chi-squared test or Fisher's exact test. A p-value of .05 or less was considered statistically significant. Overall, 1,463 (72.7 %) drivers were found using a seat belt (95 % CI: 70.8-74.7 %) and 150 (7.5 %) their mobile phones (95 % CI: 6.3-8.6 %) during the observation period. Mobile phone use was significantly associated with not using a seat belt and driving a sport utility vehicle. Significantly lower rates of seat belt use were observed in the early morning and late afternoon. No gender differences were observed. Seatbelt use in Doha was found to be similar to countries in the region but lower than those in western countries. Also, studies from other high-income locations, reported lower rates of mobile phone use while driving than in Doha. Despite road traffic crashes being one of the leading causes of death in Qatar, three out of 10 drivers in Doha, Qatar, do not use a seat belt and about one in 12 use a mobile phone while driving. More efforts, in the form of awareness campaigns and increased law enforcement, are needed to improve compliance with laws requiring seat belt use and prohibiting mobile phone use while driving.

Exploiting Continuous Scanning Laser Doppler Vibrometry in timing belt dynamic characterisation

NASA Astrophysics Data System (ADS)

Chiariotti, P.; Martarelli, M.; Castellini, P.

2017-03-01

Dynamic behaviour of timing belts has always interested the engineering community over the years. Nowadays, there are several numerical methods to predict the dynamics of these systems. However, the tuning of such models by experimental approaches still represents an issue: an accurate characterisation does require a measurement in operating conditions since the belt mounting condition might severely affect its dynamic behaviour. Moreover, since the belt is constantly moving during running conditions, non-contact measurement methods are needed. Laser Doppler Vibrometry (LDV) and imaging techniques do represent valid candidates for this purpose. This paper aims at describing the use of Continuous Scanning LDV (CSLDV) as a tool for the dynamic characterisation of timing belts in IC (Internal Combustion) engines (cylinder head). The high-spatial resolution data that can be collected in short testing time makes CSLDV highly suitable for such application. The measurement on a moving surface, however, represents a challenge for CSLDV. The paper discusses how the belt in-plane speed influences CSLDV signal and how an order-based multi-harmonic excitation might affect the recovery of Operational Deflection Shapes in a CSLDV test. A comparison with a standard Discrete Scanning LDV measurement is also given in order to show that a CSLDV test, if well designed, can indeed provide the same amount of information in a drastically reduced amount of time.

Effects of categorization method, regression type, and variable distribution on the inflation of Type-I error rate when categorizing a confounding variable.

PubMed

Barnwell-Ménard, Jean-Louis; Li, Qing; Cohen, Alan A

2015-03-15

The loss of signal associated with categorizing a continuous variable is well known, and previous studies have demonstrated that this can lead to an inflation of Type-I error when the categorized variable is a confounder in a regression analysis estimating the effect of an exposure on an outcome. However, it is not known how the Type-I error may vary under different circumstances, including logistic versus linear regression, different distributions of the confounder, and different categorization methods. Here, we analytically quantified the effect of categorization and then performed a series of 9600 Monte Carlo simulations to estimate the Type-I error inflation associated with categorization of a confounder under different regression scenarios. We show that Type-I error is unacceptably high (>10% in most scenarios and often 100%). The only exception was when the variable categorized was a continuous mixture proxy for a genuinely dichotomous latent variable, where both the continuous proxy and the categorized variable are error-ridden proxies for the dichotomous latent variable. As expected, error inflation was also higher with larger sample size, fewer categories, and stronger associations between the confounder and the exposure or outcome. We provide online tools that can help researchers estimate the potential error inflation and understand how serious a problem this is. Copyright © 2014 John Wiley & Sons, Ltd.

Large Exciton Energy Shifts by Reversible Surface Exchange in 2D II-VI Nanocrystals.

PubMed

Zhou, Yang; Wang, Fudong; Buhro, William E

2015-12-09

Reaction of n-octylamine-passivated {CdSe[n-octylamine](0.53±0.06)} quantum belts with anhydrous metal carboxylates M(oleate)2 (M = Cd, Zn) results in a rapid exchange of the L-type amine passivation for Z-type M(oleate)2 passivation. The cadmium-carboxylate derivative is determined to have the composition {CdSe[Cd(oleate)2](0.19±0.02)}. The morphologies and crystal structures of the quantum belts are largely unaffected by the exchange processes. Addition of n-octylamine or oleylamine to the M(oleate)2-passivated quantum belts removes M(oleate)2 and restores the L-type amine passivation. Analogous, reversible surface exchanges are also demonstrated for CdS quantum platelets. The absorption and emission spectra of the quantum belts and platelets are reversibly shifted to lower energy by M(oleate)2 passivation vs amine passivation. The largest shift of 140 meV is observed for the Cd(oleate)2-passivated CdSe quantum belts. These shifts are attributed entirely to changes in the strain states in the Zn(oleate)2-passivated nanocrystals, whereas changes in strain states and confinement dimensions contribute roughly equally to the shifts in the Cd(oleate)2-passivated nanocrystals. Addition of Cd(oleate)2, which electronically couples to the nanocrystal lattices, increases the effective thickness of the belts and platelets by approximately a half of a monolayer, thus increasing the confinement dimension.

Seat-belt wearing and driving behavior: an instrumented-vehicle study.

PubMed

Janssen, W

1994-04-01

Less-than-expected fatality reductions after seat-belt legislation has been introduced in a jurisdiction may be explained in terms of selective recruitment of parts of the driving population and/or behavioral adaptation by beginning belt users. The present investigation has compared the relative merits of these two hypotheses at the level of individual driver behavior. In the initial study the driving behavior of groups of habitual wearers and nonwearers of the belt was compared. Nonwearers made two trips, one with the belt on and one without the belt. Habitual wearers drove belted only. The main part of the experiment was a 105 km freeway route. Two additional tasks of a somewhat more critical nature, a double lane-change manoeuvre and the performance of a braking manoeuvre in front of a fixed obstacle, were performed after the freeway trips. Factor analysis on 39 variables describing driving behavior on the road and during the additional tasks resulted in five factors. One of these, the factor describing the distribution of driving speed on the freeway, differentiated between nonwearers and wearers (thus yielding support for the selective recruitment hypothesis) as well as between wearing and not wearing the belt by the same drivers (thus yielding support for the behavioral adaptation hypothesis). In the follow-up study the original wearers and nonwearers were assigned to one of four experimental treatments: (i) the promise by the experimenter of a considerable incentive for not having a culpable motor vehicle accident over a period of a year. Half the habitual wearer subjects were assigned to this condition. The expectation was that this group would become more careful in their driving; (ii) a control group, consisting of the remaining habitual wearers; (iii) the agreement between the experimenter and the subject that the latter would buckle up in everyday driving for the year to come--half the habitual nonwearer subjects were assigned to this condition; (iv) a control group to the previous treatment, consisting of the remaining habitual nonwearers. All subjects returned for repeat measurements, consisting of the freeway trips plus additional tasks, three times over the next year. The main result was that beginning wearers (group iii) showed signs of continuing behavioral adaptation, in the form of increased speed and increased propensity for close following, as well as several minor effects. The "incentive" group (group i), however, did not change driving behavior in the expected sense, i.e. in the safe direction.

Monitoring Crop Productivity over the U.S. Corn Belt using an Improved Light Use Efficiency Model

NASA Astrophysics Data System (ADS)

Wu, X.; Xiao, X.; Zhang, Y.; Qin, Y.; Doughty, R.

2017-12-01

Large-scale monitoring of crop yield is of great significance for forecasting food production and prices and ensuring food security. Satellite data that provide temporally and spatially continuous information that by themselves or in combination with other data or models, raises possibilities to monitor and understand agricultural productivity regionally. In this study, we first used an improved light use efficiency model-Vegetation Photosynthesis Model (VPM) to simulate the gross primary production (GPP). Model evaluation showed that the simulated GPP (GPPVPM) could well captured the spatio-temporal variation of GPP derived from FLUXNET sites. Then we applied the GPPVPM to further monitor crop productivity for corn and soybean over the U.S. Corn Belt and benchmarked with county-level crop yield statistics. We found VPM-based approach provides pretty good estimates (R2 = 0.88, slope = 1.03). We further showed the impacts of climate extremes on the crop productivity and carbon use efficiency. The study indicates the great potential of VPM in estimating crop yield and in understanding of crop yield responses to climate variability and change.

An anomalous basaltic meteorite from the innermost main belt.

PubMed

Bland, Philip A; Spurny, Pavel; Towner, Martin C; Bevan, Alex W R; Singleton, Andrew T; Bottke, William F; Greenwood, Richard C; Chesley, Steven R; Shrbeny, Lukas; Borovicka, Jiri; Ceplecha, Zdenek; McClafferty, Terence P; Vaughan, David; Benedix, Gretchen K; Deacon, Geoff; Howard, Kieren T; Franchi, Ian A; Hough, Robert M

2009-09-18

Triangulated observations of fireballs allow us to determine orbits and fall positions for meteorites. The great majority of basaltic meteorites are derived from the asteroid 4 Vesta. We report on a recent fall that has orbital properties and an oxygen isotope composition that suggest a distinct parent body. Although its orbit was almost entirely contained within Earth's orbit, modeling indicates that it originated from the innermost main belt. Because the meteorite parent body would likely be classified as a V-type asteroid, V-type precursors for basaltic meteorites unrelated to Vesta may reside in the inner main belt. This starting location is in agreement with predictions of a planetesimal evolution model that postulates the formation of differentiated asteroids in the terrestrial planet region, with surviving fragments concentrated in the innermost main belt.

Traces in the dark: sedimentary processes and facies gradients in the upper shale member of the Upper Devonian-Lower Mississippian Bakken Formation, Williston Basin, North Dakota, U.S.A.

USGS Publications Warehouse

Egenhoff, Sven O.; Fishman, Neil S.

2013-01-01

Black, organic-rich rocks of the upper shale member of the Upper Devonian–Lower Mississippian Bakken Formation, a world-class petroleum source rock in the Williston Basin of the United States and Canada, contain a diverse suite of mudstone lithofacies that were deposited in distinct facies belts. The succession consists of three discrete facies associations (FAs). These comprise: 1) siliceous mudstones; 2) quartz- and carbonate-bearing, laminated mudstones; and 3) macrofossil-debris-bearing massive mudstones. These FAs were deposited in three facies belts that reflect proximal to distal relationships in this mudstone system. The macrofossil-debris-bearing massive mudstones (FA 3) occur in the proximal facies belt and contain erosion surfaces, some with overlying conodont and phosphate–lithoclast lag deposits, mudstones with abundant millimeter-scale siltstone laminae showing irregular lateral thickness changes, and shell debris. In the medial facies belt, quartz- and carbonate-bearing, laminated mudstones dominate, exhibiting sub-millimeter-thick siltstone layers with variable lateral thicknesses and localized mudstone ripples. In the distal siliceous mudstone facies belt, radiolarites, radiolarian-bearing mudstones, and quartz- and carbonate-bearing, laminated mudstones dominate. Overall, total organic carbon (TOC) contents range between about 3 and 10 wt %, with a general proximal to distal decrease in TOC content. Abundant evidence of bioturbation exists in all FAs, and the lithological and TOC variations are paralleled by changes in burrowing style and trace-fossil abundance. While two horizontal traces and two types of fecal strings are recognized in the proximal facies belt, only a single horizontal trace fossil and one type of fecal string characterize mudstones in the distal facies belt. Radiolarites intercalated into the most distal mudstones are devoid of traces and fecal strings. Bedload transport processes, likely caused by storm-induced turbidity currents, were active across all facies belts. Suspended sediment settling from near the ocean surface, however, most likely played a role in the deposition of some of the mudstones, and was probably responsible for deposition of the radiolarites. The distribution pattern of high-TOC sediments in proximal and lower-TOC deposits in some distal facies is interpreted as a function of higher accumulation rates during radiolarian depositional events leading to a decrease in suspension-derived organic carbon in radiolarite laminae. The presence of burrows in all FAs and nearly all facies in the upper Bakken shale member indicates that dysoxic conditions prevailed during its deposition. This study shows that in intracratonic high-TOC mudstone successions such as the upper Bakken shale member bed-load processes most likely dominated sedimentation, and conditions promoted a thriving infaunal benthic community. As such, deposition of the upper Bakken shale member through dynamic processes in an overall dysoxic environment represents an alternative to conventional anoxic depositional models for world-class source rocks.

Asteroid taxonomy and the distribution of the compositional types

NASA Technical Reports Server (NTRS)

Zellner, B.

1979-01-01

Physical observations of minor planets documented in the TRIAD computer file are used to classify 752 objects into the broad compositional types C, S, M, E, R, and U (unclassifiable) according to the prescriptions adopted by Bowell et al. (1978). Diameters are computed from the photometric magnitude using radiometric and/or polarimetric data where available, or else from albedos characteristic of the indicated type. An analysis of the observational selection effects leads to tabulation of the actual number of asteroids, as a function of type and diameter, in each of 15 orbital element zones. For the whole main belt the population is 75% of type C, 15% of type S, and 10% of other types, with no belt-wide dependence of the mixing ratios on diameter. In some zones the logarithmic diameter-frequency relations are decidedly nonlinear. The relative frequency of S-type objects decreases smoothly outward through the main belt, with exponential scale length 0.5 AU. The rarer types show a more chaotic, but generally flatter, distribution over distance. Characteristic type distributions, contrasting with the background population, are found for the Eos, Koronis, Nysa and Themis families.

Petrology, geochemistry and isotopic ages of eclogites from the Dulan UHPM Terrane, the North Qaidam, NW China

NASA Astrophysics Data System (ADS)

Song, Shuguang; Yang, Jingsui; Liou, J. G.; Wu, Cailai; Shi, Rendeng; Xu, Zhiqin

2003-10-01

The Dulan eclogite-gneiss region is located in the eastern part of the North Qaidam eclogite belt, NW China. Widespread evidence demonstrates that this region is a typical ultrahigh-pressure (UHP) metamorphic terrane. Eclogites occur as lenses or layers in both granitic and pelitic gneisses. Two distinguished sub-belts can be recognized and differ in mineralogy, petrology and geochemistry. The North Dulan Belt (NDB) has tholeiitic protoliths with high TiO 2 and lower Al 2O 3 and MgO contents. REE patterns and trace element contents resemble those of N-type and E-type MORB. In contrast, eclogites in the South Dulan Belt (SDB) are of island arc protoliths with low TiO 2, high Al 2O 3 and show LREE-enriched and HFSE-depleted patterns. Sm-Nd isotope analyses give isochron ages of 458-497 Ma for eclogite-facies metamorphism for the two sub-belts. The ages are similar to those of Yuka and Altun eclogites in the western extension of the North Qaidam-Altun eclogite belt. The Dulan UHP metamorphic terrane, together with several other recently recognized eclogite-bearing terrenes within the North Qaidam-Altun HP-UHP belt, constitute the key to the understanding of the tectonic evolution of the northern Tibetan Plateau. The entire UHP belt extends for more than 1000 km from the Dulan UHP terrane in the southeast to the Altun eclogite-gneiss terrane in the west. This super-belt marks an early Paleozoic continental collision zone between the Qaidam Massif and the Qilian Massif.

Late Triassic granites from Bangka, Indonesia: A continuation of the Main Range granite province of the South-East Asian Tin Belt

NASA Astrophysics Data System (ADS)

Ng, Samuel Wai-Pan; Whitehouse, Martin J.; Roselee, Muhammad H.; Teschner, Claudia; Murtadha, Sayed; Oliver, Grahame J. H.; Ghani, Azman A.; Chang, Su-Chin

2017-05-01

The South-East Asian Tin Belt is one of the most tin-productive regions in the world. It comprises three north-south oriented granite provinces, of which the arc-related Eastern granite province and the collision-related Main Range granite province run across Thailand, Singapore, and Indonesia. These tin-producing granite provinces with different mineral assemblages are separated by Paleo-Tethyan sutures exposed in Thailand and Malaysia. The Eastern Province is usually characterised by granites with biotite ± hornblende. Main Range granites are sometimes characterised by the presence of biotite ± muscovite. However, the physical boundary between the two types of granite is not well-defined on the Indonesian Tin Islands, because the Paleo-Tethyan suture is not exposed on land there. Both hornblende-bearing (previously interpreted as I-type) and hornblende-barren (previously interpreted as S-type) granites are apparently randomly distributed on the Indonesian Tin Islands. Granites exposed on Bangka, the largest and southernmost Tin Island, no matter whether they are hornblende-bearing or hornblende-barren, are geochemically similar to Malaysian Main Range granites. The average ɛNd(t) value obtained from the granites from Bangka (average ɛNd(t) = -8.2) falls within the range of the Main Range Province (-9.6 to -5.4). These granites have SIMS zircon U-Pb ages of ca. 225 Ma and ca. 220 Ma, respectively that are both within the period of Main Range magmatism (∼226-201 Ma) in the Peninsular Malaysia. We suggest that the granites exposed on Bangka represent the continuation of the Main Range Province, and that the Paleo-Tethyan suture lies to the east of the island.

Formation of A-type granites in the Lower Yangtze River Belt: A perspective from apatite geochemistry

NASA Astrophysics Data System (ADS)

Jiang, Xiao-Yan; Li, He; Ding, Xing; Wu, Kai; Guo, Jia; Liu, Ji-Qiang; Sun, Wei-Dong

2018-04-01

Apatite is ubiquitous in A-type granites, and can be used to elucidate the volatile contents of the silicate melt, which reflect its source characteristics. A-type granites have been recognized as a distinct group of granites. A1- and A2-type subgroups are produced under different extensional settings. However, the details of the mechanisms behind the distinctive geochemical characteristics of A1- and A2-type granites remain obscure. Belts of Cretaceous A1- and A2-type granites occur along the Lower Yangtze River Belt in eastern China. Here we investigated the major and trace element compositions of apatites from contemporary A1- and A2-type granites at different localities along the Lower Yangtze River Belt, in order to decipher their discrepant source processes. Apatites from A1- and A2-type granites show similar major and trace elements, but differ in their F and Cl concentrations. Apatites from A1-type granites in the eastern part of the Lower Yangtze River Belt have much lower F and higher Cl concentrations compared to A2-type granites in the western part. Moreover, from the east to the west, the F concentrations of apatites from A1-type granites increase, while the Cl concentrations decline. In a subducted plate, F is retained by amphibole, chlorite, serpentine and mica minerals through the amphibolite stage, and finally by phengite and lawsonite during the eclogite stage, whereas, Cl is controlled by amphibole, chlorite and serpentine. The high and varied Cl concentrations in A1 subgroup apatites, therefore, may be attributed to the breakdown of amphibole, chlorite and/or serpentine decomposition during partial melting of subducted oceanic crust releasing a large amount of Cl at shallower depth. In contrast, F is transported to deeper depths in the subducted oceanic crust, and released through breakdown of phengite and lawsonite, making an important contribution to the formation of A2-type granites. Apatites from A1- and A2-type granite samples show regular changes in LREE/HREE, LREE/MREE and MREE/HREE ratios with increasing distance from the location of the subduction zone, probably as the result of nonsynchronous dehydration of the serpentine and phengite at different stages during subduction. We propose that A1- and A2-type granites on the Lower Yangtze River Belt were derived from sources metasomatised by fluids originating from the breakdown of amphibole, chlorite and/or serpentine with higher Cl, lower F, and from phengite and/or lawsonite with relatively higher F but lower Cl, respectively.

Modelling and control algorithms of the cross conveyors line with multiengine variable speed drives

NASA Astrophysics Data System (ADS)

Cheremushkina, M. S.; Baburin, S. V.

2017-02-01

The paper deals with the actual problem of developing the control algorithm that meets the technical requirements of the mine belt conveyors, and enables energy and resource savings taking into account a random sort of traffic. The most effective method of solution of these tasks is the construction of control systems with the use of variable speed drives for asynchronous motors. The authors designed the mathematical model of the system ‘variable speed multiengine drive - conveyor - control system of conveyors’ that takes into account the dynamic processes occurring in the elements of the transport system, provides an assessment of the energy efficiency of application the developed algorithms, which allows one to reduce the dynamic overload in the belt to 15-20%.

Discrete-continuous variable structural synthesis using dual methods

NASA Technical Reports Server (NTRS)

Schmit, L. A.; Fleury, C.

1980-01-01

Approximation concepts and dual methods are extended to solve structural synthesis problems involving a mix of discrete and continuous sizing type of design variables. Pure discrete and pure continuous variable problems can be handled as special cases. The basic mathematical programming statement of the structural synthesis problem is converted into a sequence of explicit approximate primal problems of separable form. These problems are solved by constructing continuous explicit dual functions, which are maximized subject to simple nonnegativity constraints on the dual variables. A newly devised gradient projection type of algorithm called DUAL 1, which includes special features for handling dual function gradient discontinuities that arise from the discrete primal variables, is used to find the solution of each dual problem. Computational implementation is accomplished by incorporating the DUAL 1 algorithm into the ACCESS 3 program as a new optimizer option. The power of the method set forth is demonstrated by presenting numerical results for several example problems, including a pure discrete variable treatment of a metallic swept wing and a mixed discrete-continuous variable solution for a thin delta wing with fiber composite skins.

The Outer Solar System Origins Survey: cold classicals beyond the 2:1 resonance

NASA Astrophysics Data System (ADS)

Bannister, Michele T.; Kavelaars, J. J.; Gladman, Brett; Petit, Jean-Marc; Gwyn, Stephen; Volk, Kathryn; Chen, Ying-Tung; Alexandersen, Mike

2015-11-01

With the 85 characterised discoveries from the first quarter of the ongoing Outer Solar System Origins Survey (OSSOS) with MegaPrime on the Canada-France-Hawaii Telescope, we find that the CFEPS L7 model of Petit et al. 2011 remains an accurate parameterization of the classical Kuiper belt's orbital structure, and the population estimate for the main belt remains unchanged (for 39 AU < a < 47 AU). We independently confirm the existence of substructure within the main classical Kuiper belt. The semi-major axis distribution of the stirred component of the cold classicals must contain a clumped ‘kernel’.We detect an extension of the cold classical Kuiper belt that continues at least several AU beyond the 2:1 mean motion resonance with Neptune. This extension would have strong cosmogonic implications for the origin of the classical belt's orbital substructure.We will discuss how the 140 new objects we discovered in the second quarter of OSSOS place further constraints on cold classicals beyond the 2:1 resonance. Our 16-18 month observational arcs and improved astrometric technique continue to achieve extremely high-quality measurements of TNO orbits: fractional semimajor axis uncertainties of our discoveries are consistently in the range 0.01-0.1%, allowing rapid orbital classification.

Asphyxia in Motor Vehicle Crashes: Analysis of Crash-Related Variables Using National Automotive Sampling System Crashworthiness Data System and Forensic Case Studies.

PubMed

Storvik, Steven G; Campbell, Julius Q; Wheeler, Jeffrey B

2017-06-01

Rates of death because of asphyxia in motor vehicle crashes have been previously estimated using county and statewide data sets, but national estimates have not been reported. The literature regarding asphyxia in motor vehicle crashes primarily involves discussions about clinical findings, and crash-related variables have been sparsely reported. The current study calculated a nationwide fatality rate for asphyxia in motor vehicle crashes of 1.4%. Seventeen case studies of asphyxia were also reported providing crash-, vehicle-, and occupant-related variables. These included type of accident, crash severity, seat belt use, containment status, extent of occupant compartment intrusion, height, weight, and injury pattern. The data presented can be used to better understand the injury mechanism, identify risk factors, develop possible protective countermeasures, and create situational awareness for emergency responders and investigators.

Effects of safety belt laws on safety belt use by American High School Seniors, 1986-2000.

PubMed

O'Malley, Patrick M; Wagenaar, Alexander C

2004-01-01

This manuscript evaluates the effects of enactment of state laws that required safety belt use in various U.S. states between 1986 and 2000. Safety belt use was assessed using nationally representative cross-sectional samples of high school seniors; evaluation of the effects of laws used data from over 2,000 high school seniors before and about 3,300 after the laws took effect in 20 states. Belt use was found to increase significantly between 1986 and 2000, and the laws contributed significantly to that increase. Increases were similar for students differing by gender, race/ethnicity, parent education, grades, truancy, evenings out per week, miles driven per week, and an index of illicit drug use. The data show that although the laws have increased belt use, use is not universal and continued efforts are needed. This study shows that many teenagers fail to use belts when there is a secondary use law; an implication is that primary laws would be more efficacious in increasing use among this vulnerable population.

Formation of forearc basins by collision between seamounts and accretionary wedges: an example from the New Hebrides subduction zone

USGS Publications Warehouse

Collot, J.-Y.; Fisher, M.A.

1989-01-01

Seabeam data reveal two deep subcircular reentrants in the lower arc slope of the New Hebrides island arc that may illustrate two stages in the development of a novel type of forearc basin. The Malekula reentrant lies just south of the partly subducted Bougainville seamount. This proximity, as well as the similarity in morphology between the reentrant and an indentation in the lower arc slope off Japan, suggests that the Malekula reentrant formed by the collision of a seamount with the arc. An arcuate fold-thrust belt has formed across the mouth of the reentrant, forming the toe of a new accretionary wedge. The Efate reentrant may show the next stage in basin development. This reentrant lies landward of a lower-slope ridge that may have begun to form as an arcuate fold-thrust belt across the mouth of a reentrant. This belt may have grown by continued accretion at the toe of the wedge, by underplating beneath the reentrant, and by trapping of sediment shed from the island arc. These processes could result in a roughly circular forearc basin. Basins that may have formed by seamount collision lie within the accretionary wedge adjacent to the Aleutian trenches. -Authors

Community food environment measures in the Alabama Black Belt: Implications for cancer risk reduction

PubMed Central

Gyawu, Rebecca; Quansah, Joseph E.; Fall, Souleymane; Gichuhi, Peter N.; Bovell-Benjamin, Adelia C.

2015-01-01

In-store measures were utilized to evaluate the availability of healthy food choices and nutrition/health promotion messages for cancer risk reduction in the selected Alabama Black Belt counties/cities. Sixty one retail food outlets (RFOs) were audited in 12 Alabama Black Belt cities. Store types included convenience stores (49.2%), restaurants (19.7%), fast food restaurants (16.4%), small supermarkets (8.2%), and large supermarket and farmers' markets (3.3 %), respectively. Although there were low numbers of farmers' markets/street stands and large supermarkets, these had significantly (p < 0.0001) higher health scores than the other store types. A few health promotion messages were highly visible or obscurely positioned in some RFOs. The Alabama Black Belt food environment had limited opportunities for healthy food choices. PMID:26844138

East Europe Report, Economic and Industrial Affairs.

DTIC Science & Technology

1984-05-10

Women’s wear, girls ’ wear, men’s wear, uni- forms /continued on following page/ 21 Combine Established Employees VEB’s in the Combined...and handles for purses and luggage Stockings,socks, panty - hose, women’s and children’s slips Belt bands,conveyer belts,textile filters of manmade

Perceived risk and other predictors and correlates of teenagers' safety belt use during the first year of licensure.

PubMed

Ouimet, Marie Claude; Morton, Bruce G Simons; Noelcke, Elizabeth A; Williams, Allan F; Leaf, William A; Preusser, David F; Hartos, Jessica L

2008-03-01

Teenagers have the lowest rate of safety belt use and the highest crash rate compared to other age groups. Past studies on teenagers' belt use have mostly been cross-sectional. The first goals of this study were to examine, at licensure, teenagers' and parents' perceptions of risk of crash/injury for newly licensed teenagers when driving unbelted and teenagers' perceived and parents' intended consequences for safety belt rule violations. In addition, the comparability of these variables to other risky driving behaviors was explored. The second goal was to evaluate the importance of these variables in the prediction of teenagers' belt use during the first year of licensure, relative to other factors related to belt use, including demographics and substance use. More than 2,000 parent-teenager dyads were interviewed by telephone, parents at permit and licensure and teenagers at permit, licensure, and 3, 6, and 12 months after licensure. Approximately a third of the teenagers reported at least once at 3, 6, or 12 months post-licensure not always using their safety belt in the past week. At licensure, participants' perceived risk of safety belt non-use was high and ranked among the behaviors most related to crash/injury for newly licensed teenagers, behind driving under the influence of alcohol or drugs. Parent-imposed consequences for safety belt rule violations were not as highly rated as parent-imposed consequences for driving under the influence of alcohol or drugs. Sequential logistic regression modeled the relationship between safety belt use and perceived risk and consequences of non-use, as well as other prospective predictors assessed at permit and licensure, and driving correlates measured after licensure. Teenagers' extreme perceived risk and parents' intended sure consequences for non-use were significant prospective predictors of regular use during the first year of licensure. Other significant predictors and correlates were race (White), high school grade average of "A," not smoking cigarettes, driving a passenger vehicle, and never receiving a traffic citation or engaging in risky driving behaviors, including driving under the influence of alcohol or drugs and running a red light. While the effect size was small for perceived risk of non-use, it is a modifiable factor and focused intervention contrived to enhance perceived risk could increase teenagers' belt use. Perceived risk is discussed as a target for intervention in relation to the Protection Motivation Theory. This theory appears helpful in guiding future research into the modifiable factors studied here as well as other factors, including perceived rewards and costs associated with non-use.

A continuous-discrete approach for evaluation of natural frequencies and mode shapes of high-rise buildings

NASA Astrophysics Data System (ADS)

Malekinejad, Mohsen; Rahgozar, Reza; Malekinejad, Ali; Rahgozar, Peyman

2016-09-01

In this paper, a continuous-discrete approach based on the concept of lumped mass and equivalent continuous approach is proposed for free vibration analysis of combined system of framed tube, shear core and outrigger-belt truss in high-rise buildings. This system is treated as a continuous system (i.e., discrete beams and columns are replaced with equivalent continuous membranes) and a discrete system (or lumped mass system) at different stages of dynamic analysis. The structure is discretized at each floor of the building as a series of lumped masses placed at the center of shear core. Each mass has two transitional degrees of freedom (lateral and axial( and one rotational. The effect of shear core and outrigger-belt truss on framed tube system is modeled as a rotational spring placed at the location of outrigger-belt truss system along structure's height. By solving the resulting eigen problem, natural frequencies and mode-shapes are obtained. Numerical examples are presented to show acceptable accuracy of the procedure in estimating the fundamental frequencies and corresponding mode shapes of the combined system as compared to finite element analysis of the complete structure. The simplified proposed method is much faster and should be more suitable for rapid interactive design.

Risk of thoracic injury from direct steering wheel impact in frontal crashes.

PubMed

Chen, Rong; Gabler, Hampton C

2014-06-01

The combination of airbag and seat belt is considered to be the most effective vehicle safety system. However, despite the widespread availability of airbags and a belt use rate of more than 85%, US drivers involved in crashes continue to be at risk of serious thoracic injury. The objective of this study was to determine the influence of steering wheel deformation on driver injury risk in frontal automobile crash. The analysis is based on cases extracted from the National Automotive Sampling System Crashworthiness Data System database for case years 1993 to 2011. The approach was to compare the adjusted odds of frontal crash injury experienced by drivers in vehicles with and without steering wheel deformation. Among frontal crash cases with belted drivers, observable steering wheel deformation occurred in less than 4% of all cases but accounted for 30% of belted drivers with serious (Abbreviated Injury Scale [AIS] score, 3+) thoracic injuries. Similarly, steering wheel deformation occurred in approximately 13% of unbelted drivers but accounted for 60% of unbelted drivers with serious thoracic injuries. Belted drivers in frontal crashes with steering wheel deformation were found to have two times greater odds of serious thoracic injury. Unbelted drivers were found to have four times greater odds of serious thoracic injury in crashes with steering wheel deformation. In frontal crashes, steering wheel deformation was more likely to occur in unbelted drivers than belted drivers, as well as higher severity crashes and with heavier drivers. The results of the present study show that airbag deployment and seat belt restraint do not completely eliminate the possibility of steering wheel contact. Even with the most advanced restraint systems, there remains an opportunity for further reduction in thoracic injury by continued enhancement to the seat belt and airbag systems. Furthermore, the results showed that steering wheel deformation is an indicator of potential serious thoracic injury and can be useful to prehospital personnel in improving the diagnosis of serious injuries. Prognostic study, level III.

Geochemical evidence for Paleozoic crustal growth and tectonic conversion in the Northern Beishan Orogenic Belt, southern Central Asian Orogenic Belt

NASA Astrophysics Data System (ADS)

Yuan, Yu; Zong, Keqing; He, Zhenyu; Klemd, Reiner; Jiang, Hongying; Zhang, Wen; Liu, Yongsheng; Hu, Zhaochu; Zhang, Zeming

2018-03-01

The Beishan Orogenic Belt is located in the central southernmost part of the Central Asian Orogenic Belt (CAOB), which plays a key role in understanding the formation and evolution of the CAOB. Granitoids are the documents of crustal and tectonic evolution in orogenic belts. However, little is known regarding the petrogenesis and geodynamic setting of the widely distributed Paleozoic granitoids in the Northern Beishan Orogenic Belt (NBOB). The present study reveals significant differences concerning the petrogenesis and tectonic setting of early and late Paleozoic granitoids from the NBOB. The early Paleozoic granitoids from the 446-430 Ma Hongliuxia granite complex of the Mazongshan unit and the 466-428 Ma Shibanjing complex of the Hanshan unit show classic I-type granite affinities as revealed by the relative enrichment of LILEs and LREEs, pronounced depletions of Nb, Ta and Ti and the abundant presence of hornblende. Furthermore, they are characterized by strongly variable zircon εHf(t) values between - 16.7 and + 12.8 and evolved plagioclase Sr isotopic compositions of 0.7145-0.7253, indicating the involvement of both juvenile and ancient continental crust in the magma source. Thus, we propose that the early Paleozoic granitoids in the NBOB were generated in a subduction-related continental arc setting. In contrast, the late Paleozoic 330-281 Ma granitoids from the Shuangjingzi complex of the Hanshan unit exhibit positive zircon εHf(t) values between + 5.8 and + 13.2 and relatively depleted plagioclase Sr isotopic compositions of 0.7037-0.7072, indicating that they were mainly formed by remelting of juvenile crust. Thus, an intra-plate extensional setting is proposed to have occurred during formation of the late Paleozoic granitoids. Therefore, between the early and late Paleozoic, the magma sources of the NBOB granitoids converted from the reworking of both juvenile and ancient crusts during a subduction-induced compressional setting to the remelting of juvenile crust during an intra-plate extensional setting, respectively. The corresponding crustal growth in the southern CAOB is dominated by early Paleozoic lateral accretion of arc complexes and late Paleozoic vertical addition of juvenile material from the mantle.

Lithologic controls on landscape dynamics and aquatic species evolution in post-orogenic mountains

NASA Astrophysics Data System (ADS)

Gallen, Sean F.

2018-07-01

Determining factors that modify Earth's topography is essential for understanding continental mass and nutrient fluxes, and the evolution and diversity of species. Contrary to the paradigm of slow, steady topographic decay after orogenesis ceases, nearly all ancient mountain belts exhibit evidence of unsteady landscape evolution at large spatial scales. External forcing from uplift from dynamic mantle processes or climate change is commonly invoked to explain the unexpected dynamics of dead orogens, yet direct evidence supporting such inferences is generally lacking. Here I use quantitative analysis of fluvial topography in the southern Appalachian Mountains to show that the exhumation of rocks of variable erosional resistance exerts a fundamental, autogenic control on the evolution of post-orogenic landscapes that continually reshapes river networks. I characterize the spatial pattern of erodibility associated with individual rock-types, and use inverse modeling of river profiles to document a ∼150 m base level fall event at 9 ± 3 Ma in the Upper Tennessee drainage basin. This analysis, combined with existing geological and biological data, demonstrates that base level fall was triggered by capture of the Upper Tennessee River basin by the Lower Tennessee River basin in the Late Miocene. I demonstrate that rock-type triggered changes in river network topology gave rise to the modern Tennessee River system and enhanced erosion rates, changed sediment flux and dispersal patterns, and altered bio-evolutionary pathways in the southeastern U.S.A., a biodiversity hotspot. These findings suggest that variability observed in the stratigraphic, geomorphic, and biologic archives of tectonically quiescent regions does not require external drivers, such as geodynamic or climate forcing, as is typically the interpretation. Rather, my findings lead to a new model of inherently unsteady evolution of ancient mountain landscapes due to the geologic legacy of plate tectonics.

The Belt voice: Acoustical measurements and esthetic correlates

NASA Astrophysics Data System (ADS)

Bounous, Barry Urban

This dissertation explores the esthetic attributes of the Belt voice through spectral acoustical analysis. The process of understanding the nature and safe practice of Belt is just beginning, whereas the understanding of classical singing is well established. The unique nature of the Belt sound provides difficulties for voice teachers attempting to evaluate the quality and appropriateness of a particular sound or performance. This study attempts to provide answers to the question "does Belt conform to a set of measurable esthetic standards?" In answering this question, this paper expands on a previous study of the esthetic attributes of the classical baritone voice (see "Vocal Beauty", NATS Journal 51,1) which also drew some tentative conclusions about the Belt voice but which had an inadequate sample pool of subjects from which to draw. Further, this study demonstrates that it is possible to scientifically investigate the realm of musical esthetics in the singing voice. It is possible to go beyond the "a trained voice compared to an untrained voice" paradigm when evaluating quantitative vocal parameters and actually investigate what truly beautiful voices do. There are functions of sound energy (measured in dB) transference which may affect the nervous system in predictable ways and which can be measured and associated with esthetics. This study does not show consistency in measurements for absolute beauty (taste) even among belt teachers and researchers but does show some markers with varying degrees of importance which may point to a difference between our cognitive learned response to singing and our emotional, more visceral response to sounds. The markers which are significant in determining vocal beauty are: (1) Vibrancy-Characteristics of vibrato including speed, width, and consistency (low variability). (2) Spectral makeup-Ratio of partial strength above the fundamental to the fundamental. (3) Activity of the voice-The quantity of energy being produced. (4) Consistency of the voice-How low is the variability in the energy patterns of the voice.

Barriers to implementing climate resilient agricultural strategies: The case of crop diversification in the U.S. Corn Belt

Treesearch

Gabrielle E. Roesch-McNally; J.G. Arbuckle; John C. Tyndall

2018-01-01

Cropping system diversity can help build greater agroecosystem resilience by suppressing insect, weed, and disease pressures while also mitigating effects of extreme and more variable weather. Despite the potential benefits of cropping systems diversity, few farmers in the US Corn Belt use diverse rotations. This study examines factors that may influence farmers’...

Detection of silicate emission features in the 8- to 13-micron spectra of main belt asteroids

NASA Technical Reports Server (NTRS)

Feierberg, M. A.; Witteborn, F. C.; Lebofsky, L. A.

1983-01-01

A presentation is given of 8.0-13.0 micron spectra (Delta lambda/lambda = 0.02-0.03) for six main belt asteroids, which range from 58 to 220 km in diameter and sample the five principal taxonomic classes (C, S, M, R and E). Narrow, well-defined silicate emission features are present on two of the asteroids, the C-type 19 Fortuna and the M-type 21 Lutetia. No comparable emission features are observed on the S-types 11 Parthenope and 14 Irene, the R-type 349 Dembowska or the E-type 64 Angelina.

CAN'T MISS--conquer any number task by making important statistics simple. Part 1. Types of variables, mean, median, variance, and standard deviation.

PubMed

Hansen, John P

2003-01-01

Healthcare quality improvement professionals need to understand and use inferential statistics to interpret sample data from their organizations. In quality improvement and healthcare research studies all the data from a population often are not available, so investigators take samples and make inferences about the population by using inferential statistics. This three-part series will give readers an understanding of the concepts of inferential statistics as well as the specific tools for calculating confidence intervals for samples of data. This article, Part 1, presents basic information about data including a classification system that describes the four major types of variables: continuous quantitative variable, discrete quantitative variable, ordinal categorical variable (including the binomial variable), and nominal categorical variable. A histogram is a graph that displays the frequency distribution for a continuous variable. The article also demonstrates how to calculate the mean, median, standard deviation, and variance for a continuous variable.

A method for automated control of belt velocity changes with an instrumented treadmill.

PubMed

Hinkel-Lipsker, Jacob W; Hahn, Michael E

2016-01-04

Increased practice difficulty during asymmetrical split-belt treadmill rehabilitation has been shown to improve gait outcomes during retention and transfer tests. However, research in this area has been limited by manual treadmill operation. In the case of variable practice, which requires stride-by-stride changes to treadmill belt velocities, the treadmill control must be automated. This paper presents a method for automation of asymmetrical split-belt treadmill walking, and evaluates how well this method performs with regards to timing of gait events. One participant walked asymmetrically for 100 strides, where the non-dominant limb was driven at their self-selected walking speed, while the other limb was driven randomly on a stride-by-stride basis. In the control loop, the key factors to insure that the treadmill belt had accelerated to its new velocity safely during the swing phase were the sampling rate of the A/D converter, processing time within the controller software, and acceleration of the treadmill belt. The combination of these three factors resulted in a total control loop time during each swing phase that satisfied these requirements with a factor of safety that was greater than 4. Further, a polynomial fit indicated that belt acceleration was the largest contributor to changes in this total time. This approach appears to be safe and reliable for stride-by-stride adjustment of treadmill belt speed, making it suitable for future asymmetrical split-belt walking studies. Further, it can be incorporated into virtual reality rehabilitation paradigms that utilize split-belt treadmill walking. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Asian monsoon's role in atmospheric heat transport responses to orbital and millennial-scale climate change

NASA Astrophysics Data System (ADS)

McGee, D.; Green, B.; Donohoe, A.; Marshall, J.

2015-12-01

Recent studies have provided a framework for understanding the zonal-mean position of the tropical rain belt by documenting relationships between rain belt latitude and atmospheric heat transport across the equator (Donohoe et al., 2013). Modern seasonal and interannual variability in globally-averaged rain belt position (often referred to as 'ITCZ position') reflects the interhemispheric heat balance, with the rain belt's displacement toward the warmer hemisphere directly proportional to atmospheric heat transport into the cooler hemisphere. Model simulations suggest that rain belt shifts are likely to have obeyed the same relationship with interhemispheric heat transport in response to past changes in orbital parameters, ice sheets, and ocean circulation. This relationship implies that even small (±1 degree) shifts in the mean rain belt require large changes in hemispheric heat budgets, placing tight bounds on mean rain belt shifts in past climates. This work has primarily viewed tropical circulation in two dimensions, as a pair of zonal-mean Hadley cells on either side of the rain belt that are displaced north and south by perturbations in hemispheric energy budgets, causing the atmosphere to transport heat into the cooler hemisphere. Here we attempt to move beyond this zonal-mean perspective, motivated by arguments that the Asian monsoon system, rather than the zonal-mean circulation, plays the dominant role in annual-mean heat transport into the southern hemisphere in the modern climate (Heaviside and Czaja, 2012; Marshall et al., 2014). We explore a range of climate change experiments, including simulations of North Atlantic cooling and mid-Holocene climate, to test whether changes in interhemispheric atmospheric heat transport are primarily driven by the mean Hadley circulation, the Asian monsoon system, or other regional-scale atmospheric circulation changes. The scalings that this work identifies between Asian monsoon changes and atmospheric heat transport help to provide quantitative insights into Asian monsoon variability in past climates. References cited: Donohoe, A. et al., (2013) Journal of Climate 26, 3597-3618. Heaviside, C. and Czaja, A. (2012) Quart. J. Royal Met. Soc. 139, 2181-2189. Marshall, J. et al., (2014) Climate Dynamics 42, 1967-1979.

Drivers' assessment of Ford's belt reminder system.

PubMed

Williams, Allan F; Wells, Joann K

2003-12-01

In recent model years, Ford vehicles have been equipped with a supplementary seat belt reminder system that flashes and chimes intermittently for up to 5 min if the driver is unbelted. Sound- and light-based belt reminder systems of various types are beginning to appear in the market place, and it is important to learn about their acceptance and ability to increase belt use. The present study was designed to ascertain consumer reaction and reported belt use regarding the Ford system. Personal interviews were conducted with 405 drivers of vehicles with the reminder system. Among the drivers, 67% said they had activated the belt reminder one or more times, 73% said that the last time this happened they fastened their belts, 46% said their belt use had increased since driving this vehicle, 78% said they liked the reminder system, and 79% said they wanted a reminder system like this in their next vehicle. Five percent had disabled the system. Part-time users were responsive to the reminder, for example, of those who said they currently used belts usually but not on some occasions, 70% said they fastened their seat belts the last time the reminder was activated and 76% said their belt use had increased. Five percent spontaneously mentioned the belt reminder as an especially disliked feature of their new vehicles, and 2% said their belt use had decreased since having it. The 7% of respondents who reported they used belts never or very occasionally were least responsive to the system. Overall, the Ford belt reminder system is being favorably received.

Neoproterozoic, Paleozoic, and Mesozoic granitoid magmatism in the Qinling Orogen, China: Constraints on orogenic process

NASA Astrophysics Data System (ADS)

Wang, Xiaoxia; Wang, Tao; Zhang, Chengli

2013-08-01

The Qinling Orogen is one of the main orogenic belts in Asia and is characterized by multi-stage orogenic processes and the development of voluminous magmatic intrusions. The results of zircon U-Pb dating indicate that granitoid magmatism in the Qinling Orogen mainly occurred in four distinct periods: the Neoproterozoic (979-711 Ma), Paleozoic (507-400 Ma), and Early (252-185 Ma) and Late (158-100 Ma) Mesozoic. The Neoproterozoic granitic magmatism in the Qinling Orogen is represented by strongly deformed S-type granites emplaced at 979-911 Ma, weakly deformed I-type granites at 894-815 Ma, and A-type granites at 759-711 Ma. They can be interpreted as the products of respectively syn-collisional, post-collisional and extensional setting, in response to the assembly and breakup of the Rodinia supercontinent. The Paleozoic magmatism can be temporally classified into three stages of 507-470 Ma, 460-422 Ma and ˜415-400 Ma. They were genetically related to the subduction of the Shangdan Ocean and subsequent collision of the southern North China Block and the South Qinling Belt. The 507-470 Ma magmatism is spatially and temporally related to ultrahigh-pressure metamorphism in the studied area. The 460-422 Ma magmatism with an extensive development in the North Qinling Belt is characterized by I-type granitoids and originated from the lower crust with the involvement of mantle-derived magma in a collisional setting. The magmatism with the formation age of ˜415-400 Ma only occurred in the middle part of the North Qinling Belt and is dominated by I-type granitoid intrusions, and probably formed in the late-stage of a collisional setting. Early Mesozoic magmatism in the study area occurred between 252 and 185 Ma, with the cluster in 225-200 Ma. It took place predominantly in the western part of the South Qinling Belt. The 250-240 Ma I-type granitoids are of small volume and show high Sr/Y ratios, and may have been formed in a continental arc setting related to subduction of the Mianlue Ocean between the South Qinling Belt and the South China Block. Voluminous late-stage (225-185 Ma) magmatism evolved from early I-type to later I-A-type granitoids associated with contemporaneous lamprophyres, representative of a transition from syn- to post-collisional setting in response to the collision between the North China and the South China blocks. Late Mesozoic (158-100 Ma) granitoids, located in the southern margin of the North China Block and the eastern part of the North Qinling Belt, are characterized by I-type, I- to A-type, and A-type granitoids that were emplaced in a post-orogenic or intraplate setting. The first three of the four periods of magmatism were associated with three important orogenic processes and the last one with intracontinental process. These suggest that the tectonic evolution of the Qinling Orogen is very complicated.

Metamorphic belts of Anatolia

NASA Astrophysics Data System (ADS)

Oberhänsli, Roland; Prouteau, Amaury; Candan, Osman; Bousquet, Romain

2015-04-01

Investigating metamorphic rocks from high-pressure/low-temperature (HP/LT) belts that formed during the closure of several oceanic branches, building up the present Anatolia continental micro-plate gives insight to the palaeogeography of the Neotethys Ocean in Anatolia. Two coherent HP/LT metamorphic belts, the Tavşanlı Zone (distal Gondwana margin) and the Ören-Afyon-Bolkardağ Zone (proximal Gondwana margin), parallel their non-metamorphosed equivalent (the Tauride Carbonate Platform) from the Aegean coast in NW Anatolia to southern Central Anatolia. P-T conditions and timing of metamorphism in the Ören-Afyon-Bolkardağ Zone (>70?-65 Ma; 0.8-1.2 GPa/330-420°C) contrast those published for the overlying Tavşanlı Zone (88-78 Ma; 2.4 GPa/500 °C). These belts trace the southern Neotethys suture connecting the Vardar suture in the Hellenides to the Inner Tauride suture along the southern border of the Kirşehir Complex in Central Anatolia. Eastwards, these belts are capped by the Oligo-Miocene Sivas Basin. Another HP/LT metamorphic belt, in the Alanya and Bitlis regions, outlines the southern flank of the Tauride Carbonate Platform. In the Alanya Nappes, south of the Taurides, eclogites and blueschists yielded metamorphic ages around 82-80 Ma (zircon U-Pb and phengite Ar-Ar data). The Alanya-Bitlis HP belt testifies an additional suture not comparable to the northerly Tavşanlı and Ören-Afyon belts, thus implying an additional oceanic branch of the Neotethys. The most likely eastern lateral continuation of this HP belt is the Bitlis Massif, in SE Turkey. There, eclogites (1.9-2.4 GPa/480-540°C) occur within calc-arenitic meta-sediments and in gneisses of the metamorphic (Barrovian-type) basement. Zircon U-Pb ages revealed 84.4-82.4 Ma for peak metamorphism. Carpholite-bearing HP/LT metasediments representing the stratigraphic cover of the Bitlis Massif underwent 0.8-1.2 GPa/340-400°C at 79-74 Ma (Ar-Ar on white mica). These conditions compares to the Tavşanlı-Afyon realm. However the differences in time and P-T conditions (eclogite- vs. blueschist-facies units) in the Bitlis Massif indicate that the different metamorphic peak conditions were reached at different times in a single subduction zone. Exhumation from approx. 65 to 35 km depth occurred within <10 myr. The special relations between eclogite-blueschist are due to the fact that collision with the Arabian plate was and still is on going in the Bitlis area. The Bitlis HP rocks represent a subduction realm that separated the Bitlis-Pütürge(-Bistun?) continental block from the South-Armenian (Tauride?) block, further north. Post-Eocene blueschists south of the Bitlis Massif witness the separation of the Bitlis-Pütüre block from the Arabian plate, and the southward migration of the subduction zone from the Late Cretaceous to the Oligocene. Continuous convergence of Africa and Eurasia engendered the simultaneous consumption of several, separated branches of the Neotethys Ocean and amalgamation of different terranes. The rise of the Eastern Anatolia Plateau is related to this complex geodynamic setting. Reduced seismic velocities inferred from geophysical observations, which are interpreted as complete replacement of lithospheric- by asthenospheric mantle, can be explained by thermodynamic modelling as partial hydration of the lithospheric mantle wedge during protracted subduction. Hydrated lithospheric mantle is interpreted as result of the complex geodynamic setting in Anatolia with multiple simultaneous subduction zones.

Fore and aft elastic response characteristics of size 34x9.9, type 7, 14 ply-rated aircraft tires of bias ply, bias belted, and radial belted design. M.S. Thesis - George Washington Univ., Washington, D. C.

NASA Technical Reports Server (NTRS)

Tanner, J. A.

1973-01-01

An investigation was conducted to determine the fore-and-aft elastic response characteristics of aircraft tires of bias ply, bias-belted, and radial-belted design. The investigation consisted of: (1)static and rolling tests, (2)a statistical analysis which related the measured tire elastic characteristics to variations in the vertical load, inflation pressure, braking force and/or tire vertical deflection, and (3) a semi-empirical analysis which related the tire elastic behavior to measured wheel slippage during a steady-state braking. The results of this investigation indicate that the bias-belted tire has the largest spring constant value for most loading conditions and the radial-belted tire has the smallest spring constant value.

Risk of injury associated with the use of seat belts and air bags in motor vehicle crashes.

PubMed

Cummins, Justin S; Koval, Kenneth J; Cantu, Robert V; Spratt, Kevin F

2008-01-01

Although air bags have been reported to reduce passenger mortality in frontal collisions, they have also been reported as a cause of injury in motor vehicle collisions(MVCs). The purpose of this study was to evaluate a large cohort of patients involved in MVCs to determine mortality and the pattern of injuries associated with seat belt use and air bag deployment. Information on patients involved in MVCs from 1988 to 2004 was obtained from the National Trauma Data Bank (NTDB). The data was evaluated based on four groups of safety devices: seat belt and deployed air bag (SBAB), seat belt only (SBO), deployed air bag only (ABO), and no safety devices (None). A total of 35,333 patients met study inclusion criteria. Air bags and seat belts used in combination decreased the risk of potentially fatal injuries, but increased the risk of lower extremity injuries (odds ratio, 1.35). The use of any type of restraint led to a decrease in the risk of injury or mortality in MVCs. Only half of all individuals in this study used any type of restraint device, which indicates the need for significant improvements in public health and safety seat belt utilization programs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

August, Tyler M.; Wiegert, Paul A., E-mail: tx_august@laurentian.ca

The size distribution of the asteroid belt is examined with 16956 main belt asteroids detected in data taken from the Canada-France-Hawaii Telescope Legacy Survey in two filters (g' and r'). The cumulative H (absolute magnitude) distribution is examined in both filters, and both match well to simple power laws down to H = 17, with slopes in rough agreement with those reported the literature. This implies that disruptive collisions between asteroids are gravitationally dominated down to at least this size, and probably sub-kilometer scales. The slopes of these distributions appear shallower in the outer belt than the inner belt, andmore » the g' distributions appear slightly steeper than the r'. The slope shallowing in the outer belt may reflect a real compositional difference: the inner asteroid belt has been suggested to consist mostly of stony and/or metallic S-type asteroids, whereas carbonaceous C-types are thought to be more prevalent further from the Sun. No waves are seen in the size distribution above H = 15. Since waves are expected to be produced at the transition from gravitationally-dominated to internal strength-dominated collisions, their absence here may imply that the transition occurs at sub-kilometer scales, much smaller than the H = 17 (diameter {approx} 1.6 km) cutoff of this study.« less

Method for determining molten metal pool level in twin-belt continuous casting machines

DOEpatents

Kaiser, Timothy D.; Daniel, Sabah S.; Dykes, Charles D.

1989-03-21

A method for determining level of molten metal in the input of a continuous metal casting machine having at least one endless, flexible, revolving casting belt with a surface which engages the molten metal to be cast and a reverse, cooled surface along which is directed high velocity liquid coolant includes the steps of predetermining the desired range of positions of the molten metal pool and positioning at least seven heat-sensing transducers in bearing contact with the moving reverse belt surface and spaced in upstream-downstream relationship relative to belt travel spanning the desired pool levels. A predetermined temperature threshold is set, somewhat above coolant temperature and the output signals of the transducer sensors are scanned regarding their output signals indicative of temperatures of the moving reverse belt surface. Position of the molten pool is determined using temperature interpolation between any successive pair of upstream-downstream spaced sensors, which follows confirmation that two succeeding downstream sensors are at temperature levels exceeding threshold temperature. The method accordingly provides high resolution for determining pool position, and verifies the determined position by utilizing full-strength signals from two succeeding downstream sensors. In addition, dual sensors are used at each position spanning the desired range of molten metal pool levels to provide redundancy, wherein only the higher temperature of each pair of sensors at a station is utilized.

Observational evidence of competing source, loss, and transport processes for relativistic electrons in Earth's outer radiation belt

NASA Astrophysics Data System (ADS)

Turner, Drew; Mann, Ian; Usanova, Maria; Rodriguez, Juan; Henderson, Mike; Angelopoulos, Vassilis; Morley, Steven; Claudepierre, Seth; Li, Wen; Kellerman, Adam; Boyd, Alexander; Kim, Kyung-Chan

Earth’s outer electron radiation belt is a region of extreme variability, with relativistic electron intensities changing by orders of magnitude over time scales ranging from minutes to years. Extreme variations of outer belt electrons ultimately result from the relative impacts of various competing source (and acceleration), loss, and transport processes. Most of these processes involve wave-particle interactions between outer belt electrons and different types of plasma waves in the inner magnetosphere, and in turn, the activity of these waves depends on different solar wind and magnetospheric driving conditions and thus can vary drastically from event to event. Using multipoint analysis with data from NASA’s Van Allen Probes, THEMIS, and SAMPEX missions, NOAA’s GOES and POES constellations, and ground-based observatories, we present results from case studies revealing how different source/acceleration and loss mechanisms compete during active periods to result in drastically different distributions of outer belt electrons. By using a combination of low-Earth orbiting and high-altitude-equatorial orbiting satellites, we briefly review how it is possible to get a much more complete picture of certain wave activity and electron losses over the full range of MLTs and L-shells throughout the radiation belt. We then show example cases highlighting the importance of particular mechanisms, including: substorm injections and whistler-mode chorus waves for the source and acceleration of relativistic electrons; magnetopause shadowing and wave-particle interactions with EMIC waves for sudden losses; and ULF wave activity for driving radial transport, a process which is important for redistributing relativistic electrons, contributing both to acceleration and loss processes. We show how relativistic electron enhancement events involve local acceleration that is consistent with wave-particle interactions between a seed population of 10s to 100s of keV electrons, with a source in the plasma sheet, and chorus waves. We show how sudden losses during outer belt dropout events are dominated at higher L-shells (L>~4) by magnetopause shadowing and outward radial transport, which is effective over the full ranges of energy and equatorial pitch angle of outer belt electrons, but at lower L-shells near the plasmapause, energy and pitch angle dependent losses can also occur and are consistent with rapid scattering by interactions between relativistic electrons and EMIC waves. We show cases demonstrating how these different processes occur simultaneously during active periods, with relative effects that vary as a function of L-shell and electron energy and pitch angle. Ultimately, our results highlight the complexity of competing source/acceleration, loss, and transport processes in Earth’s outer radiation belt and the necessity of using multipoint observations to disambiguate between them for future studies.

Biomechanical considerations for assessing interactions of children and small occupants with inflatable seat belts.

PubMed

Rouhana, Stephen W; Sundararajan, Srinivasan; Board, Derek; Prasad, Priya; Rupp, Jonathan D; Miller, Carl S; Jeffreys, Thomas A; Schneider, Lawrence W

2013-11-01

NHTSA estimates that more than half of the lives saved (168,524) in car crashes between 1960 and 2002 were due to the use of seat belts. Nevertheless, while seat belts are vital to occupant crash protection, safety researchers continue efforts to further enhance the capability of seat belts in reducing injury and fatality risk in automotive crashes. Examples of seat belt design concepts that have been investigated by researchers include inflatable, 4-point, and reverse geometry seat belts. In 2011, Ford Motor Company introduced the first rear seat inflatable seat belts into production vehicles. A series of tests with child and small female-sized Anthropomorphic Test Devices (ATD) and small, elderly female Post Mortem Human Subjects (PMHS) was performed to evaluate interactions of prototype inflatable seat belts with the chest, upper torso, head and neck of children and small occupants, from infants to young adolescents. Tests simulating a 6-year-old child asleep in a booster seat, with its head lying directly on its shoulder on top of the inflatable seat belt, were considered by engineering judgment, to represent a worst case scenario for interaction of an inflating seat belt with the head and neck of a child and/or small occupant. All evaluations resulted in ATD responses below Injury Assessment Reference Values reported by Mertz et al. (2003). In addition, the tests of the PMHS subjects resulted in no injuries from interaction of the inflating seat belt with the heads, necks, and chests of the subjects. Given the results from the ATD and PMHS tests, it was concluded that the injury risk to children and small occupants from deployment of inflatable seat belt systems is low.

The thrust belt in Southwest Montana and east-central Idaho

USGS Publications Warehouse

Ruppel, Edward T.; Lopez, David A.

1984-01-01

The leading edge of the Cordilleran fold and thrust in southwest Montana appears to be a continuation of the edge of the Wyoming thrust belt, projected northward beneath the Snake River Plain. Trces of the thrust faults that form the leading edge of the thrust belts are mostly concealed, but stratigraphic and structural evidence suggests that the belt enters Montana near the middle of the Centennial Mountains, continues west along the Red Rock River valley, and swings north into the Highland Mountains near Butte. The thrust belt in southwest Montana and east-central Idaho includes at least two major plates -- the Medicine Lodge and Grasshopper thrust plates -- each of which contains a distinctive sequence of rocks, different in facies and structural style from those of the cratonic region east of the thrust belt. The thrust plates are characterized by persuasive, open to tight and locally overturned folds, and imbricate thrust faults, structural styles unusual in Phanerozoic cratonic rocks. The basal decollement zones of the plates are composed of intensely sheared, crushed, brecciated, and mylonitized rocks, the decollement at the base of the Medicine Lodge plate is as much as 300 meters thick. The Medicine Lodge and Grasshopper thrust plates are fringed on the east by a 10- to 50-kilometer-wide zone of tightly folded rocks cut by imbricate thrust fauls, a zone that forms the eastern margin of the thrust belt in southwest Montana. The frontal fold and thrust zone includes rocks that are similar to those of the craton, even though they differ in details of thickness, composition, or stratigraphic sequence. The zone is interpreted to be one of terminal folding and thrusting in cratonic rocks overridden by the major thrust plates from farther west. The cratonic rocks were drape-folded over rising basement blocks that formed a foreland bulge in front of the thrust belt. The basement blocks are bounded by steep faults of Proterozoic ancestry, which also moved as tear faults during thrusting, and seem to have controlled the curving patterns of salients and reentrants at the leading edge of the thrust belt. Radiometric and stratiographic evidence shows that the thrust belt was in its present position by about 75 million year go.

Assessment of insurance incentives for safety belt usage

DOT National Transportation Integrated Search

1983-05-12

This study assesses the feasibility of insurance companies to offer incentives, in the form of premium reductions or additional benefits, which would be effective in increasing safety belt usage. The insurance types considered in this report are auto...

Association between exposure/non-exposure to the mandatory seat belt law with regards to compliance in vehicle accident victims--a hospital review.

PubMed

Williams, E W; Reid, M; Lindo, J L M; Williams-Johnson, J; French, S; Singh, P; McDonald, A H

2007-06-01

Injuries sustained in motor vehicle accidents (MVAs) are a major challenge to the Jamaican healthcare system. In November 1999, Jamaica enacted legislation to make seat belt usage in motor vehicles compulsory. The effect of this policy change on seat belt usage is unclear. This study therefore sought to determine the prevalence of seat belt usage and to determine the association between exposure/non-exposure to the mandatory seat belt law and seat belt use in subjects who presented to the Accident and Emergency Department (A&E) of the University Hospital of the West Indies (UHWI) as a result of motor vehicle accidents. Subjects were recruited from June to November 2003, post-seat belt law (POBL) period, and May to October 1999, pre-seat belt law (PRBL) period. Data collected included demographic variables, seat belt use and position of the occupants in the vehicle. Of the 277 patients who were eligible for inclusion, data were complete in 258 subjects, 87 in the PRBL period and 171 in the POBL period. The prevalence of seat belt use was 47% (PRBL) and 63% (POBL) respectively. There was no significant gender difference at each period. The odds of wearing seat belt in the rear of a motor vehicle were significantly lower than that of a driver (Table 3, OR 0.19, 95% CI 0.07, 0.48). Adjusting for age, gender and position in vehicle exposure, there was about 100% increase in the odds of seat belt use during the post seat belt law era (OR = 2.09, 95% CI 1.21, 3.61). It is concluded from this hospital-based study that the mandatory seat belt law legislature was associated with increased seat belt use in motor vehicle accident victims. However, current data from the Road Traffic Agency indicate that there is still an alarming number of fatalities. This clearly suggests that additional public health measures are needed to address the epidemic of motor vehicle trauma in Jamaica.

Asteroid surface materials: Mineralogical characterizations from reflectance spectra

NASA Technical Reports Server (NTRS)

Gaffey, M. J.; Mccord, T. B.

1977-01-01

Mineral assemblages analogous to most meteorite types, with the exception of ordinary chondritic assemblages, have been found as surface materials of Main Belt asteroids. C1- and C2-like assemblages (unleached, oxidized meteoritic clay minerals plus opaques such as carbon) dominate the population throughout the Belt, especially in the outer Belt. A smaller population of asteroids exhibit surface materials similar to C3 (CO, CV) meteoritic assemblages (olivine plus opaque, probably carbon) and are also distributed throughout the Belt. The majority of remaining studied asteroids (20) of 65 asteroids exhibit spectral reflectance curves dominated by the presence of metallic nickel-iron in their surface materials. The C2-like materials which dominate the main asteroid belt population appear to be relatively rare on earth-approaching asteroids.

Different operational meanings of continuous variable Gaussian entanglement criteria and Bell inequalities

NASA Astrophysics Data System (ADS)

Buono, D.; Nocerino, G.; Solimeno, S.; Porzio, A.

2014-07-01

Entanglement, one of the most intriguing aspects of quantum mechanics, marks itself into different features of quantum states. For this reason different criteria can be used for verifying entanglement. In this paper we review some of the entanglement criteria casted for continuous variable states and link them to peculiar aspects of the original debate on the famous Einstein-Podolsky-Rosen (EPR) paradox. We also provide a useful expression for valuating Bell-type non-locality on Gaussian states. We also present the experimental measurement of a particular realization of the Bell operator over continuous variable entangled states produced by a sub-threshold type-II optical parametric oscillators (OPOs).

Taxonomy Discrimination of the Tina Asteroid Family via Photometric Color Indices (Abstract)

NASA Astrophysics Data System (ADS)

Galiazzo, M. A.; Zeilinger, W. W.; Carraro, G.; Oszkiewicz, D.

2017-12-01

(Abstract only) This work aims to expand our understanding of the physical characteristics of the Tina asteroid family in the main belt. This small group is unusual, as the only asteroid group currently known to be completely contained in the stable island of one of the principal secular resonances of the main belt, the n6. This family is almost near the center of the main asteroid belt, having its members with a semi-major axis between 2.765 au and 2.807 au. Its largest body is (1222) Tina, 21 km in diameter and an X-type asteroid. We aim to find their taxonomic types by performing correlations with their color indices.

The crustal structure of the eastern Fennoscandian Shield and central part of the East-European platform based on seismic, regional geophysic and geological data

NASA Astrophysics Data System (ADS)

Mints, M. V.; Berzin, R. G.; Babayants, P. S.; Konilov, A. N.; Suleimanov, A. K.; Zamozhniaya, N. G.; Zlobin, V. L.

2003-04-01

The 1-EU and 4B CDP transects worked out during 1998-2002 years by "Spetsgeophyzica", together with previously developed CDP profiles, have crossed most of the main tectonic units of the eastern Fennoscandian Shield and central part of the East-European platform. They provide seismic images of the Early Precambrian crust and upper mantle from the surface to about 80 km depth (25 s). The Neoarchaean granite-greenstone complexes of the Karelia craton along the 4B profile form a series of the tectonic slices descending eastward, some of which can be traced to the Moho. The Palaeoproterozoic structures presented by two main types: (1) volcano-sedimentary (VS) and (2) granulite-gneiss (GN) belts. The Pechenga-Varzuga VS belt has been identified as overthrust-underthrust southward-dipping package. Tectonic slices formed by the Palaeoproterozoic VS belts alternating with slices of the Neoarchaean granite-gneisses form the imbricated crustal unit that extends along the eastern margin of the Neoarchaean Karelia craton. The slices dip steeply northeastward flattening and partially juxtaposing at 20 km depth at the 1-EU cross-section. This level, which can be understood as the surface of main detachment, ascends westward. An imbrication and related thickening of the crust was caused by displacement of crustal slices in western and southwestern directions because of the Palaeoproterozoic collision event. The Palaeoproterozoic Onega unit comprising VS assemblages originated in a setting of the rifted passive margin forms the northwestward displaced thrust nappe complex. It is considered initially belonging to the southern edge of the Svecofennian passive margin. The Lapland GN belt has been transected by the Polar and EGGI profiles. Both cross-sections demonstrated that it constitutes thick composite crustal-scale tectonic slice. According to geophysical data, the continuation of the Lapland GN belt beneath the platform cover of the East European Craton forms an extended arch-shaped system of the belts approximately 2000 km long. In the vicinity of Moscow the thrust-nappe structure of these belts was recently recognized from reflection seismic profiling along 1-EU profile. The work has been developed in frames of the MPR RF Program and The SVEKALAPKO project and supported by the RFBR, grant No.00-05-64241.

Spectroscopy of five V-type asteroids in the middle and outer main belt

NASA Astrophysics Data System (ADS)

Migliorini, Alessandra; De Sanctis, M. C.; Lazzaro, D.; Ammannito, E.

2018-03-01

The origin of basaltic asteroids found in the middle and outer main belt is an open question. These asteroids are not dynamically linked to the Vesta collisional family and can be the remnants of other large differentiated asteroids present in the early phases of the main belt but destroyed long ago. Spectroscopic investigation of some V-type asteroids in the middle-outer belt, classified as such by their SLOAN photometric colours (Ivezić et al.) and WISE albedos (Masiero et al.), has revealed that their spectra are more similar to other taxonomic classes, like -Q, R, S, or A (Jasmim et al. and Oszkiewicz et al.). Here, we report about the observation, in the near-infrared spectral range, of five V-type asteroids located beyond 2.5 au. These observations allowed us to infer their taxonomic classification. Two asteroids, (21238) Panarea (observed in a previous campaign but here included for comparison) and (105041) 2000 KO41, confirm their basaltic nature. For asteroids (10800) 1992 OM8 and (15898) Kharasterteam a taxonomic classification is more uncertain, being either Q- or S-type. Asteroid (14390) 1990 QP10 classification is difficult to ascribe to the known taxonomic classes, maybe due to the low-quality spectrum. Further observations are desirable for this asteroid.

Examining Relativistic Electron Loss in the Outer Radiation Belt

NASA Astrophysics Data System (ADS)

Green, J. C.; Onsager, T. G.; O'Brien, P.

2003-12-01

Since the discovery of earth's radiation belts researchers have sought to identify the mechanisms that dictate the seemingly erratic relativistic electron flux levels in the outer belt. Contrary to intuition, relativistic electron flux levels do not always increase during geomagnetic storms even though these storms signify enhanced energy input from the solar wind to the magnetosphere [Reeves et al., 2003; O'Brien et al., 2001]. The fickle response of the radiation belt electrons to geomagnetic activity suggests that flux levels are determined by the outcome of a continuous competition between acceleration and loss. Some progress has been made developing and testing acceleration mechanisms but little is known about how relativistic electrons are lost. We examine relativistic electron losses in the outer belt focusing our attention on flux decrease events of the type first described by Onsager et al. [2002]. The study showed a sudden decrease of geosynchronous >2MeV electron flux occurring simultaneously with local stretching of the magnetic field. The decrease was first observed near 15:00 MLT and progressed to all local times after a period of ˜10 hours. Expanding on the work of Onsager et al. [2002], we have identified ˜ 51 such flux decrease events in the GOES and LANL data and present the results of a superposed epoch analysis of solar wind data, geomagnetic activity indicators, and locally measured magnetic field and plasma data. The analysis shows that flux decreases occur after 1-2 days of quiet condition. They begin when either the solar wind dynamic pressure increases or Bz turns southward pushing hot dense plasma earthward to form a partial ring current and stretched magnetic field at dusk. Adiabatic electron motion in response to the stretched magnetic field may explain the initial flux reduction; however, often the flux does not recover with the magnetic field recovery, indicating that true loss from the magnetosphere is occurring. Using Polar and SAMPEX data, we examine whether precipitation to the atmosphere or magnetopause encounters can account for the additional loss.

The Santa Cruz - Tarija Province of Central South America: Los Monos - Machareti(!) Petroleum System

USGS Publications Warehouse

Lindquist, Sandra J.

1999-01-01

The Los Monos - Machareti(!) total petroleum system is in the Santa Cruz - Tarija Province of Bolivia, Argentina and Paraguay. Province history is that of a Paleozoic, intracratonic, siliciclastic rift basin that evolved into a Miocene (Andean) foreland fold and thrust belt. Existing fields are typified by alternating reservoir and seal rocks in post-Ordovician sandstones and shales on anticlines. Thick Devonian and Silurian shale source rocks, depositionally and erosionally confined to this province, at a minimum have generated 4.1 BBOE known ultimate recoverable reserves (as of 1995, 77% gas, 15% condensate, 8% oil) into dominantly Carboniferous reservoirs with average 20% porosity and 156 md permeability. Major detachment surfaces within the source rocks contributed to the thin-skinned and laterally continuous nature of the deformation. Tertiary foreland burial adequate for significant source maturation coincided with the formation of compressional traps. Further hydrocarbon discovery in the fold and thrust belt is expected. In the foreland basin, higher thermal gradients and variable burial history - combined with the presence of unconformity and onlap wedges - create potential there for stratigraphic traps and pre-Andean, block-fault and forced-fold traps.

The Surface Composition of Large Kuiper Belt Object 2007 OR10

NASA Astrophysics Data System (ADS)

Brown, M. E.; Burgasser, A. J.; Fraser, W. C.

2011-09-01

We present photometry and spectra of the large Kuiper belt object 2007 OR10. The data show significant near-infrared absorption features due to water ice. While most objects in the Kuiper belt with water ice absorption this prominent have the optically neutral colors of water ice, 2007 OR10 is among the reddest Kuiper belt objects known. One other large Kuiper belt object—Quaoar—has similar red coloring and water ice absorption, and it is hypothesized that the red coloration of this object is due to irradiation of the small amounts of methane able to be retained on Quaoar. 2007 OR10, though warmer than Quaoar, is in a similar volatile retention regime because it is sufficiently larger that its stronger gravity can still retain methane. We propose, therefore, that the red coloration on 2007 OR10 is also caused by the retention of small amounts of methane. Positive detection of methane on 2007 OR10 will require spectra with higher signal to noise. Models for volatile retention on Kuiper belt objects appear to continue to do an excellent job reproducing all of the available observations.

Compliance with Seat Belt Use in Makurdi, Nigeria: An Observational Study

PubMed Central

Popoola, SO; Oluwadiya, KS; Kortor, JN; Denen-Akaa, P; Onyemaechi, NOC

2013-01-01

Background: Seat belts are designed to reduce injuries due to road crash among vehicle occupants. Aims: This study aims to determine the availability of seat belt in vehicles and compliance with seat belt use among vehicle occupants. Materials and methods: This was a 24-h direct observational study of seat belt usage among vehicle occupants in Makurdi, Benue State, Nigeria. By direct surveillance and using a datasheet, we observed 500 vehicles and their occupants for seat belt availability and compliance with its use. Chi-square test was used for test of significance between variables. Results: Twenty-five (5.0%) of the observed 500 vehicles had no seat belt at all. Overall, compliance was 277/486 (57.0%). Use of seat belt was highest in the afternoon with 124/194 (64.4%), followed by 111/188 (59.0%) in the morning and 42/95 (44.2%) at night. Compliance was highest among car occupants [209/308 (67.9%)] and private vehicles, and lowest among commercial vehicle occupants. Compliance among female drivers was 77.1% compared with 51.4% among male drivers. Among drivers, the mean age of seat belt users was 38.4 (7.7) years, which was significantly younger than the 41.3 (8.7) years mean age of non-users. Similar figures were obtained among other vehicle occupants. Conclusions: Compared with previous studies, seat belt usage has improved among Nigerian road users, but there is still room for improvement, especially early in the mornings and at nights. Since these were times when law enforcement agencies were not likely to be on the roads, we advocate for improved coverage by enforcement agents to enforce better compliance. PMID:24116327

Cuffless Blood Pressure Estimation Based on Data-Oriented Continuous Health Monitoring System

PubMed Central

Kawanaka, Haruki; Oguri, Koji

2017-01-01

Measuring blood pressure continuously helps monitor health and also prevent lifestyle related diseases to extend the expectancy of healthy life. Blood pressure, which is nowadays used for monitoring patient, is one of the most useful indexes for prevention of lifestyle related diseases such as hypertension. However, continuously monitoring the blood pressure is unrealistic because of discomfort caused by the tightening of a cuff belt. We have earlier researched the data-oriented blood pressure estimation without using a cuff. Remarkably, our blood pressure estimation method only uses a photoplethysmograph sensor. Therefore, the application is flexible for sensor locations and measuring situations. In this paper, we describe the implementation of our estimation method, the launch of a cloud system which can collect and manage blood pressure data measured by a wristwatch-type photoplethysmograph sensor, and the construction of our applications to visualize life-log data including the time-series data of blood pressure. PMID:28523074

Klippen Belt, Flysch Belt and Inner Western Carpathian Paleogene Basin Relations in the Northern Slovakia by Magnetotelluric Imaging

NASA Astrophysics Data System (ADS)

Majcin, Dušan; Bezák, Vladimír; Klanica, Radek; Vozár, Ján; Pek, Josef; Bilčík, Dušan; Telecký, Josef

2018-05-01

The paper presents the interpretation of magnetotelluric measurements along the SW-NE profile near Stará Ľubovňa (Northern Slovakia). The profile passes through the Outer Carpathian Flysch Belt, Klippen Belt and ends in the Inner Western Carpathians Paleogene NW from Ružbachy horst structure. The interpretation of the older measurements from profile Mt4 was utilized and, moreover, the 3-D geoelectrical model of studied region was constructed. The magnetotelluric data interpretations verified the northern inclination of Flysch belt structures and their smaller thickness out of Klippen Belt in direction to the Carpathian electrical conductivity zone axis. We consider this as a consequence of the flower structure—more precisely the southern branch of the suture zone related to mentioned conductivity zone. Northerly from this zone the thickness of the Outer Carpathian Flysch Belt increases and the structures have inclination to the south, i.e. to the subduction zone. The contact of Flysch Belt with Klippen Belt has a fault character and it is subvertical, slightly inclined to the North. The southern boundary between Klippen Belt and Inner Western Carpathians has also fault character and is very steep. We detect the continuation of the Ružbachy horst to the NE in the basement of Inner Western Carpathian Paleogene. The structural discordance between this horst and Klippen Belt direction is a result of younger tectonic processes. According to our results the depth distribution of the pre-Tertiary basement below the Inner Western Carpathian units is non-uniform; the basement is broken to a number of partial blocks—horsts and grabens.

Improving seat belt use among teen drivers: findings from a service-learning approach.

PubMed

Goldzweig, Irwin A; Levine, Robert S; Schlundt, David; Bradley, Richard; Jones, Gennifer D; Zoorob, Roger J; Ekundayo, O James

2013-10-01

Low seat belt use and higher crash rates contribute to persistence of motor vehicle crashes as the leading cause of teenage death. Service-learning has been identified as an important component of public health interventions to improve health behavior. A service-learning intervention was conducted in eleven selected high schools across the United States in the 2011-2012 school year. Direct morning and afternoon observations of seat belt use were used to obtain baseline observations during the fall semester and post-intervention observations in the spring. The Mann-Whitney U test for 2 independent samples was used to evaluate if the intervention was associated with a statistically significant change in seat belt use. We identified factors associated with seat belt use post-intervention using multivariable logistic regression. Overall seat belt use rate increased by 12.8%, from 70.4% at baseline to 83.2% post-intervention (p<0.0001). A statistically significant increase in seat belt use was noted among white, black, and Hispanic teen drivers. However, black and Hispanic drivers were still less likely to use seat belts while driving compared to white drivers. Female drivers and drivers who had passengers in their vehicle had increased odds of seat belt use. A high school service-learning intervention was associated with improved seat belt use regardless of race, ethnicity, or gender, but did not eliminate disparities adversely affecting minority youth. Continuous incorporation of service-learning in high school curricula could benefit quality improvement evaluations aimed at disparities elimination and might improve the safety behavior of emerging youth cohorts. Copyright © 2013 Elsevier Ltd. All rights reserved.

Possible causes of socioeconomic and ethnic differences in seat belt use among high school students.

PubMed

Shin, D; Hong, L; Waldron, I

1999-09-01

This study has assessed seat belt use and factors which may influence seat belt use among high school students from three types of schools. The inner city schools had high proportions of African American and Hispanic American students from low income families, whereas the middle class school and private schools had high proportions of non-Hispanic white students from middle class families with college educated parents. Students from the inner city schools reported less seat belt use than students from the middle class school or private schools. Our analyses evaluated several hypotheses concerning possible reasons why inner city youth had lower rates of seat belt use. In accord with the social influences hypothesis, inner city youth reported lower rates of parental seat belt use and less often being told by parents to use their seat belts, and our regression results indicate that less parental modeling and encouragement of seat belt use was an important cause of inner city youth's lower rates of seat belt use. Our other hypotheses received weaker support, but we did find evidence for two hypothesized differences in attitudes which influence seat belt use. Specifically, inner city youth were more likely to agree with the statement, 'there is no point in wearing seat belts since you have no control over your fate or destiny', and inner city youth attributed less importance to safety concerns as a motivation for seat belt use. These attitudes appeared to contribute to lower rates of seat belt use by inner city youth.

Few-Mode Whispering-Gallery-Mode Resonators

NASA Technical Reports Server (NTRS)

Savchenkov, Anatoliy; Strekalov, Dmitry; Matsko, Andrey; Iltchenko, Vladimir; Maleki, Lute

2006-01-01

Whispering-gallery-mode (WGM) optical resonators of a type now under development are designed to support few well-defined waveguide modes. In the simplest case, a resonator of this type would support one equatorial family of WGMs; in a more complex case, such a resonator would be made to support two, three, or some other specified finite number of modes. Such a resonator can be made of almost any transparent material commonly used in optics. The nature of the supported modes does not depend on which material is used, and the geometrical dispersion of this resonator is much smaller than that of a typical prior WGM resonator. Moreover, in principle, many such resonators could be fabricated as integral parts of a single chip. Basically, a resonator of this type consists of a rod, made of a suitable transparent material, from which protrudes a thin circumferential belt of the same material. The belt is integral with the rest of the rod (see figure) and acts as a circumferential waveguide. If the depth (d) and width (w) of the belt are made appropriately small, then the belt acts as though it were the core of a single-mode optical fiber: the belt and its adjacent supporting rod material support a single, circumferentially propagating mode or family of modes. It has been shown theoretically that the fiber-optic-like behavior of the belton- rod resonator structure can be summarized, in part, by the difference, Dn, between (1) an effective index of refraction of an imaginary fiber core and (2) the index of refraction (n) of the transparent rod/belt material. It has also been shown theoretically that for a given required value of Dn, the required depth of the belt can be estimated as d R Dn, where R is the radius of the rod. It must be emphasized that this estimated depth is independent of n and, hence, is independent of the choice of rod material. As in the cases of prior WGM resonators, input/output optical coupling involves utilization of evanescent fields. In the present case, there are two evanescent fields: one at the belt/air interface and one in the boundary region between the belt and the rest of the rod.

Geological, petrogical and geochemical characteristics of granitoid rocks in Burma: with special reference to the associated WSn mineralization and their tectonic setting

NASA Astrophysics Data System (ADS)

Zaw, Khin

The granitoid rocks in Burma extend over a distance of 1450 km from Putao, Kachin State in the north, through Mogok, Kyaukse, Yamethin and Pyinmana in the Mandalay Division, to Tavoy and Mergui areas, Tenasserim Division, in the south. The Burmese granitoids can be subdivided into three N-S trending, major belts viz. western granitoid belt, central graniotoid belt and eastern granitoid belt. The Upper Cretaceous-Lower Eocene western belt granitoids are characterized by high-level intrusions associated with porphyry Cu(Au) related, younger volcanics; these plutonic and volcanic rocks are thought to have been emplaced as a magmatic-volcanic arc (inner magmatic-volcanic arc) above an east-dipping, but westwardly migrating, subduction zone related to the prolonged plate convergence which occurred during Upper Mesozoic and Cenozoic. The central granitoid belt is characterized by mesozonal, Mostly Upper Cretaceous to Lower Eocene plutons associated with abundant pegmalites and aplites, numerous vein-type W-Sn deposits and rare co-magmatic volcanics. The country rocks are structurally deformed, metamorphic rocks of greenschist to upper amphibolite facies ranging in age as early as Upper Precambrian to Upper Paleozoic and locally of fossiliferous, metaclastic rocks (Mid Jurassic to Lower Cretaceous). Available K/Ar radiometric data indicate significant and possibly widespread thermal disturbances in the central granitoid belt during the Tertiary (mostly Miocence). In this study, the distribution, lithological, textural and structural characteristics of the central belt granitoids are reviewed, and their mineralogical, petrological, and geochemical features are presented. A brief description of W-Sn ore veins associated with these granitoid plutons is also reported. Present geological, petrological and geochemical evidences demonstrate that the W-Sn related, central belt granitoids are mostly granodiorite and granite which are commonly transformed into granitoid gneisses. These central belt granitoids were formed from a calc-alkaline magma derived from a source of continental, sialic materials. Highly potassiccharacters and high initial Sr 87/Sr 86 ratios (0.717±0.002) and Rb/Sr ratios (0.40-33.10) with an average value of 6.70, further corroborate their derivation from a well established continental, sialic basement. Although future chemical and isotopic investigations would be desirable, none of the present evidence argues the interpretation that the granitoid magma was generated by the re-melting of the regionally metamorphosed country rocks. The close association of W-Sn bearing quartz veins and the granitoid rocks also suggests that the metals were derived from the same crustal sources as their host granitoids. The central belt granitoids are considered to have been emplaced during the continent-arc collision of inferred Upper Triassic-Jurassic magmatic-volcanic arc with the continental foreland to the east at the early stage of westward migration of the east-dipping subduction zone to the west. The W-Sn related, central belt granitoids of Upper Mesozoic-Lower Eocene are notably different from those of mainly Triassic granitoids from northern Thailand and Permo-Triassic granites of the Malay Peninsula, and thus the central belt granitoids were emplaced in a uniquely distinct geologic and tetonic setting in the SE Asian region. Major element data for the central belt granitoids, which are associated with W-Sn mineralization lie within the field of Sn-mineralizing granites from New England in Na-K-Ca plot (Juniper and Kleeman, J. Geochem. Explor.11, 321-333, 1979), but largely outside the field on SiO 2CaO +_MgO + FeONa 2O + K 2O + Al 2O 3 plot. Trace element abundances of the central belt granitoid rocks suggest that the Sn content of the granitoids alone should be used with great caution to discriminate the W-Sn bearing (mineralized) granitoid plutons from the W-Sn poor (barren) plutons in search for the W-Sn deposits in Burma, but trace element data show the tendency for granitoid plutons which bear W-Sn mineralization to be comparatively more enriched in Be, Bi, Cu, Mo, Pb, Sn, Y, and Zn, but less depleted in Ba and Zr than those plutons in which no W-Sn occurrences are recorded. The eastern belt granitoids are still largely unknown but characterized by medium to coarsely porphyritic textures and country rocks of regionally metamorphosed, turbiditic sediments of Chaung Magyi Group (Upper Precambrian). This eastern granitoid belt lies immediately to the north of mostly Triassic granitoids in northern Thailand, and the Sn-W bearing, mesozonal, Permo-Triassic, Main Range granitoids in the western part of the Malay Peninsula. The latter granitoid swere considered to have been emplaced during continental collision, but geologic and tectonic information for the eastern belt grantoids in Burma are still incomplete to confirm this contention. Alternatively, present available geologic evidences cannot rule out the possibility that the eastern belt granitoids were emplaced in a continental margin above an eastward subducting ocean floor during the Lower Paleozoic. According to the criteria given by Chappell and White ( Pacific Geol.8, 173-174, 1974), the porphyry Cu(Au)-related, western granitoid belt plutons have I-type characteristics, whereas the W-Sn related, central granitoid belt contains both the hornblende-bearing I-type granitoids as older intrusive phases and the W-Sn bearing, S-type granitoids as younger plutonic phases. The eastern belt granitoids cannot be classified as being of either I- or S-type, as petrochemical data are still lacking.

Direct observation of safety belt use in Michigan : Fall 1997

DOT National Transportation Integrated Search

1997-10-01

The present survey reports the results of a direct observation survey of safety belt use conducted in the fall of 1997. In this study, 10,307 occupants traveling in four vehicle types (oassenger cars, sport-utility vehicles, vans, and pickup trucks) ...

Direct observation of safety belt use in Michigan : Fall 2000

DOT National Transportation Integrated Search

2000-11-01

Reported here are the results of a direct observation survey of safety belt use conducted in the fall of 2000. In this study, 14,366 occupants traveling in four vehicle types (passenger cars, sport-utility vehicles, vans/minivans, and pickup trucks) ...

Concurrent generation of multivariate mixed data with variables of dissimilar types.

PubMed

Amatya, Anup; Demirtas, Hakan

2016-01-01

Data sets originating from wide range of research studies are composed of multiple variables that are correlated and of dissimilar types, primarily of count, binary/ordinal and continuous attributes. The present paper builds on the previous works on multivariate data generation and develops a framework for generating multivariate mixed data with a pre-specified correlation matrix. The generated data consist of components that are marginally count, binary, ordinal and continuous, where the count and continuous variables follow the generalized Poisson and normal distributions, respectively. The use of the generalized Poisson distribution provides a flexible mechanism which allows under- and over-dispersed count variables generally encountered in practice. A step-by-step algorithm is provided and its performance is evaluated using simulated and real-data scenarios.

Formation of fold and thrust belts on Venus due to horizontal shortening of a laterally heterogeneous lithosphere

NASA Technical Reports Server (NTRS)

Zuber, M. T.; Parmentier, E. M.; Neumann, G. A.

1994-01-01

An outstanding question relevant to understanding the tectonics of Venus is the mechanism of formation of fold and thrust belts, such as the mountain belts that surround Lakshmi Planum in western Ishtar Terra. These structures are typically long (hundreds of km) and narrow (many tens of km), and are often located at the margins of relatively high (km-scale) topographic rises. Previous studies have attempted to explain fold and thrust belts in various areas of Venus in the context of viscous and brittle wedge theory. However, while wedge theory can explain the change in elevation from the rise to the adjacent lowland, it fails to account for a fundamental aspect of the deformation, i.e., the topographic high at the edge of the rise. In this study we quantitatively explore the hypothesis that fold and thrust belt morphology on Venus can alternatively be explained by horizontal shortening of a lithosphere that is laterally heterogeneous, due either to a change in thickness of the lithosphere or the crust. Lateral heterogeneities in lithosphere structure may arise in response to thermal thinning or extensive faulting, while variations in crustal thickness may arise due to either spatially variable melting of mantle material or by horizontal shortening of the crust. In a variable thickness lithosphere or crust that is horizontally shortened, deformation will tend to localize in the vicinity of thickness heterogeneity, resulting in a higher component of dynamic topography there as compared to elsewhere in the shortening lithosphere. This mechanism may thus provide a simple explanation for the topographic high at the edge of the rise.

Formation of fold and thrust belts on Venus due to horizontal shortening of a laterally heterogeneous lithosphere

NASA Astrophysics Data System (ADS)

Zuber, M. T.; Parmentier, E. M.; Neumann, G. A.

1994-03-01

An outstanding question relevant to understanding the tectonics of Venus is the mechanism of formation of fold and thrust belts, such as the mountain belts that surround Lakshmi Planum in western Ishtar Terra. These structures are typically long (hundreds of km) and narrow (many tens of km), and are often located at the margins of relatively high (km-scale) topographic rises. Previous studies have attempted to explain fold and thrust belts in various areas of Venus in the context of viscous and brittle wedge theory. However, while wedge theory can explain the change in elevation from the rise to the adjacent lowland, it fails to account for a fundamental aspect of the deformation, i.e., the topographic high at the edge of the rise. In this study we quantitatively explore the hypothesis that fold and thrust belt morphology on Venus can alternatively be explained by horizontal shortening of a lithosphere that is laterally heterogeneous, due either to a change in thickness of the lithosphere or the crust. Lateral heterogeneities in lithosphere structure may arise in response to thermal thinning or extensive faulting, while variations in crustal thickness may arise due to either spatially variable melting of mantle material or by horizontal shortening of the crust. In a variable thickness lithosphere or crust that is horizontally shortened, deformation will tend to localize in the vicinity of thickness heterogeneity, resulting in a higher component of dynamic topography there as compared to elsewhere in the shortening lithosphere. This mechanism may thus provide a simple explanation for the topographic high at the edge of the rise.

Static mechanical properties of 30 x 11.5 - 14.5, type 8 aircraft tires of bias-ply and radial-belted design

NASA Technical Reports Server (NTRS)

Davis, Pamela A.; Lopez, Mercedes C.

1988-01-01

An investigation was conducted to determine the static mechanical properties of a 30 x 11.5 to 14.5, Type 8, bias-ply and radial-belted aircraft tire. The properties measured were the spring rate and damping characteristics of each tire from vertical- and lateral-loading hysteresis loops. Mass moment of inertia tests were also conducted. The results of the study are presented along with a discussion of the advantages and disadvantages of each type of tire.

Comparison of 30x11.5 - 14.5 bias-ply and radial-belted tire characteristics

NASA Technical Reports Server (NTRS)

Davis, Pamela A.

1992-01-01

An investigation at NASA Langley Research Center was conducted to determine the static and dynamic mechanical characteristics of 30x11.5-14.5, Type VIII, bias-ply and radial-belted aircraft tires. The tire characteristics were determined by application of vertical and fore-and-aft loads. The results of the study are presented to show static load deflection curves, hysteresis losses, and stiffness and damping characteristics of each tire type tested. The advantages and disadvantages of each type of tire are also given.

Efficacy of ultraviolet light exposure against survival of Listeria monocytogenes on conveyor belts.

PubMed

Morey, Amit; McKee, Shelly R; Dickson, James S; Singh, Manpreet

2010-06-01

Listeria monocytogenes has been repeatedly isolated from foods and food-processing facilities including food contact surfaces such as conveyor belts (CB). CBs are often difficult to clean and require rigorous sanitation programs for decontamination. Ultraviolet (UV) light has exhibited microbicidal properties on food contact surfaces and this study was conducted to determine the efficacy of UV against L. monocytogenes on CB made of different materials. A four-strain cocktail of L. monocytogenes (serotypes 3A, 4A, 4B, and 4C) was made to give a suspension of approximately 10(7) CFU/mL. CBs made from four different types of materials, (1) Ropanyl DM 8/2 A2 + 04 (belt 1), (2) Volta FRMW-3.0 (belt 2), (3) Volta FRMB-3.0 (belt 3), and (4) Ropanyl DM (belt 4), were inoculated with 1 mL of the four-strain cocktail (approximately 10(7) CFU/mL) of the bacterial suspension. CBs were treated with UV light (254 nm) for 1 and 3 sec at 5.53 and 5.95 mW/cm(2). Three replications of the experiments were conducted. Two-way analysis of variance of survival populations of L. monocytogenes showed that bacterial counts were significantly reduced (p < 0.05) on all belt types irrespective of UV light intensities and times of exposure. L. monocytogenes populations were reduced (p < 0.05) to below detection limits on belts 1, 2, and 3 after exposure to 5.95 mW/cm(2) UV light intensity for 3 sec. L. monocytogenes-inoculated CBs that were exposed to 5.53 mW/cm(2) showed higher (p < 0.05) survival populations of L. monocytogenes compared with 5.95 mW/cm(2) on all the four CBs. Belt 4 showed survival populations of L. monocytogenes ranging from 1.42 to 1.73 log(10) CFU/cm(2) after UV light treatment for 1 and 3 sec. UV light can be effectively used to reduce L. monocytogenes contamination on CBs.

49 CFR 571.208a - Optional test procedures for vehicles manufactured between January 27, 2004 and August 31, 2004.

Code of Federal Regulations, 2010 CFR

2010-10-01

... S16.3.3.1.9 and S16.3.3.1.10. S16.3.5.4 Remove all slack from the lap belt. Pull the upper torso... device, introduce the maximum amount of slack into the upper torso belt that is recommended by the..., place the Type 2 manual belt around the test dummy and fasten the latch. Remove all slack from the lap...

Structure, metamorphism, and geochronology of the Cosmos Hills and Ruby Ridge, Brooks Range schist belt, Alaska

USGS Publications Warehouse

Christiansen, Peter B.; Snee, Lawrence W.

1994-01-01

The boundary of the internal zones of the Brooks Range orogenic belt (the schist belt) is a fault contact that dips toward the hinterland (the Yukon-Koyukuk province). This fault, here referred to as the Cosmos Hills fault zone, juxtaposes oceanic rocks and unmetamorphosed sedimentary rocks structurally above blueschist-to-greenschist facies metamorphic rocks of the schist belt. Near the fault contact, schist belt rocks are increasingly affected by a prominent, subhorizontal transposition foliation that is locally mylonitic in the fault zone. Structural and petrologic observations combined with 40Ar/39Ar incremental-release geochronology give evidence for a polyphase metamorphic and deformational history beginning in the Middle Jurassic and continuing until the Late Cretaceous. Our 40Ar/39Ar cooling age for Jurassic metamorphism is consistent with stratigraphic and other evidence for the onset of Brooks Range orogenesis. Jurassic metamorphism is nearly everywhere overprinted by a regional greenschist-facies event dated at 130–125 Ma. Near the contact with the Cosmos Hills fault zone, the schist belt is increasingly affected by a younger greenschist metamorphism that is texturally related to a prominent foliation that folds and transposes an older fabric. The 40Ar/39Ar results on phengite and fuchsite that define this younger fabric give recrystallization ages ranging from 103 to less than 90 Ma. We conclude that metamorphism that formed the transposition fabric peaked around 100 Ma and may have continued until well after 90 Ma. This age for greenschist metamorphism is broadly synchronous with the depositional age of locally derived, shallow-marine clastic sedimentary strata in the hanging wall of the fault zone and thus substantiates the interpretation that the fault zone accommodated extension in the Late Cretaceous. This extension unroofed and exhumed the schist belt during relative subsidence of the Yukon-Koyukuk province.

Fall Protection Characteristics of Safety Belts and Human Impact Tolerance.

PubMed

Hino, Yasumichi; Ohdo, Katsutoshi; Takahashi, Hiroki

2014-08-23

Many fatal accidents due to falls from heights have occurred at construction sites not only in Japan but also in other countries. This study aims to determine the fall prevention performance of two types of safety belts: a body belt 1) , which has been used for more than 40 yr in the Japanese construction industry as a general type of safety equipment for fall accident prevention, and a full harness 2, 3) , which has been used in many other countries. To determine human tolerance for impact trauma, this study discusses features of safety belts with reference 4-9) to relevant studies in the medical science, automobile crash safety, and aircrew safety. For this purpose, simple drop tests were carried out in a virtual workplace to measure impact load, head acceleration, and posture in the experiments, the Hybrid-III pedestrian model 10) was used as a human dummy. Hybrid-III is typically employed in official automobile crash tests (New Car Assessment Program: NCAP) and is currently recognized as a model that faithfully reproduces dynamic responses. Experimental results shows that safety performance strongly depends on both the variety of safety belts used and the shock absorbers attached onto lanyards. These findings indicate that fall prevention equipment, such as safety belts, lanyards, and shock absorbers, must be improved to reduce impact injuries to the human head and body during falls.

Fall protection characteristics of safety belts and human impact tolerance.

PubMed

Hino, Yasumichi; Ohdo, Katsutoshi; Takahashi, Hiroki

2014-01-01

Many fatal accidents due to falls from heights have occurred at construction sites not only in Japan but also in other countries. This study aims to determine the fall prevention performance of two types of safety belts: a body belt, which has been used for more than 40 yr in the Japanese construction industry as a general type of safety equipment for fall accident prevention, and a full harness, which has been used in many other countries. To determine human tolerance for impact trauma, this study discusses features of safety belts with reference to relevant studies in the medical science, automobile crash safety, and aircrew safety. For this purpose, simple drop tests were carried out in a virtual workplace to measure impact load, head acceleration, and posture in the experiments, the Hybrid-III pedestrian model was used as a human dummy. Hybrid-III is typically employed in official automobile crash tests (New Car Assessment Program: NCAP) and is currently recognized as a model that faithfully reproduces dynamic responses. Experimental results shows that safety performance strongly depends on both the variety of safety belts used and the shock absorbers attached onto lanyards. These findings indicate that fall prevention equipment, such as safety belts, lanyards, and shock absorbers, must be improved to reduce impact injuries to the human head and body during falls.

Fall Protection Characteristics of Safety Belts and Human Impact Tolerance

PubMed Central

HINO, Yasumichi; OHDO, Katsutoshi; TAKAHASHI, Hiroki

2014-01-01

Abstract: Many fatal accidents due to falls from heights have occurred at construction sites not only in Japan but also in other countries. This study aims to determine the fall prevention performance of two types of safety belts: a body belt1), which has been used for more than 40 yr in the Japanese construction industry as a general type of safety equipment for fall accident prevention, and a full harness2, 3), which has been used in many other countries. To determine human tolerance for impact trauma, this study discusses features of safety belts with reference4,5,6,7,8,9) to relevant studies in the medical science, automobile crash safety, and aircrew safety. For this purpose, simple drop tests were carried out in a virtual workplace to measure impact load, head acceleration, and posture in the experiments, the Hybrid-III pedestrian model10) was used as a human dummy. Hybrid-III is typically employed in official automobile crash tests (New Car Assessment Program: NCAP) and is currently recognized as a model that faithfully reproduces dynamic responses. Experimental results shows that safety performance strongly depends on both the variety of safety belts used and the shock absorbers attached onto lanyards. These findings indicate that fall prevention equipment, such as safety belts, lanyards, and shock absorbers, must be improved to reduce impact injuries to the human head and body during falls. PMID:25345426

Analysing of critical force effects of aircraft seat belt using truss elements

NASA Astrophysics Data System (ADS)

Klemenc, Marek; Markopoulos, Alexandros; Maršálek, Pavel

2017-07-01

This paper deals with the mathematical modelling of an aircraft seat belt crash test. The main goal is determination of a time course of the reactions in a lap belt anchoring points and their maximum values. This work was created on the basis of practical requirements from industry. Results are going to be reflected in developing a new type of aircraft seats. We mainly focus on the mathematical modelling of dynamic problems using the finite element method (FEM). Derived procedures are implemented in the Python programming language and are verified by several examples. A final calculation algorithm is applied on the analysis of the safety belt. We consider that a seat belt bending stiffness is very small compared to a tensile stiffness, therefore we used a 2D plane truss element.

Moon-based visibility analysis for the observation of “The Belt and Road”

NASA Astrophysics Data System (ADS)

REN, Yuanzhen; GUO, Huadong; LIU, Guang; YE, Hanlin; DING, Yixing; RUAN, Zhixing; LV, Mingyang

2016-11-01

Aiming at promoting the economic prosperity and regional economic cooperation, the “Silk Road Economic Belt” and the “21st Century Maritime Silk Road” (hereinafter referred to as the Belt and Road) was raised. To get a better understanding of “the Belt and Road” whole region, considering the large-scale characteristic, the Moon platform is a good choice. In this paper, the ephemeris is taken as data source and the positions and attitudes of Sun, Earth and Moon are obtained based on the reference systems transformation. Then we construct a simplified observation model and calculate the spatial and angular visibility of the Moon platform for “the Belt and Road” region. It turns out that Moon-based observation of this region shows a good performance of spatial visibility and variable angular visibility, indicating the Moon being a new potential platform for large-scale Earth observation.

Do seat belts and air bags reduce mortality and injury severity after car accidents?

PubMed

Cummins, Justin S; Koval, Kenneth J; Cantu, Robert V; Spratt, Kevin F

2011-03-01

We studied National Trauma Data Bank data to determine the effectiveness of car safety devices in reducing mortality and injury severity in 184,992 patients between 1988 and 2004. Safety device variables were seat belt used plus air bag deployed; only seat belt used; only air bag deployed; and, as explicitly coded, no device used. Overall mortality was 4.17%. Compared with the no-device group, the seat-belt-plus-air-bag group had a 67% reduction in mortality (adjusted odds ratio [AOR], 0.33; 99% confidence interval [CI], 0.28-0.39), the seatbelt- only group had a 51% mortality reduction (AOR, 0.49; 99% CI, 0.45-0.52), and the air-bag-only group had a 32% mortality reduction (AOR, 0.68, 99% CI, 0.57-0.80). Injury Severity Scores showed a similar pattern.

Spatial and temporal relations between coronae and extensional belts, northern Lada Terra, Venus

NASA Astrophysics Data System (ADS)

Baer, G.; Schubert, G.; Bindschadler, D. L.; Stofan, E. R.

1994-04-01

Preliminary studies of the distribution of coronae and volcanic rises on Venus show that many of these features tend to cluster along zones of rifting and extension. The plains north of Lada Terra are crossed by two such extensional belts. Each belt is composed of grabens, ridges, faults, volcanic flows, coronae and coronalike features. The longer and more prominent belt is the NW trending Alpha-Lada extensional belt, which is over 6000 km long and 50-200 km wide, and includes the coronae Eve, Tamfana, Carpo, Selu, Derceto, Otygen, and an unnamed corona south of Otygen. The second belt is the NNE trending Derceto-Quetzalpetlatl extensional belt, which is about 2000 km long and in places over 300 km wide, and includes the coronae Sarpanitum, Eithinoha, and Quetzalpetlatl. The two belts intersect at the 1600 x 600 km wide Derceto volcanic plateau. It is apparent that deformation along the two belts overlapped in time, though deformation along the Alpha-Lada extensional belt probably continued after the deformation along the Derceto-Quetzalpetlatl extensional belt terminated. In certain areas, volcanism originated in grabens within the extensional belts, whereas in other areas, such as in Eve, Selu, Derceto, and Quetzalpetlatl, volcanism originated in the coronae and flowed into the lower parts of the extensional belts. Regional extension has affected the evolution of all the coronae at some stage of their development. Regional deformation occurred before the initiation of Derceto and Eithinoha of their development. Regional deformation occurred before the initiation of Derceto and Eithinoha and after the initiation of Carpo, Tamfana, Otygen, and Sarpanitum. It is thus unlikely that coronae formation along the belts is solely a consequence of the regional extension, and it is also unlikely that regional extension has been caused solely by the coronae. No corona along the belts was formed subsequent to the cessation of the regional extension. We therefore suggest that the regional extension and the coronae are interrelated. Some of the coronae may have determined the location of the surface expression of the regional extension, whereas the locations of other coronae may have been influenced by the concentration of regional extensional stresses.

[Optimization of vacuum belt drying process of Gardeniae Fructus in Reduning injection by Box-Behnken design-response surface methodology].

PubMed

Huang, Dao-sheng; Shi, Wei; Han, Lei; Sun, Ke; Chen, Guang-bo; Wu Jian-xiong; Xu, Gui-hong; Bi, Yu-an; Wang, Zhen-zhong; Xiao, Wei

2015-06-01

To optimize the belt drying process conditions optimization of Gardeniae Fructus extract from Reduning injection by Box-Behnken design-response surface methodology, on the basis of single factor experiment, a three-factor and three-level Box-Behnken experimental design was employed to optimize the drying technology of Gardeniae Fructus extract from Reduning injection. With drying temperature, drying time, feeding speed as independent variables and the content of geniposide as dependent variable, the experimental data were fitted to a second order polynomial equation, establishing the mathematical relationship between the content of geniposide and respective variables. With the experimental data analyzed by Design-Expert 8. 0. 6, the optimal drying parameter was as follows: the drying temperature was 98.5 degrees C , the drying time was 89 min, the feeding speed was 99.8 r x min(-1). Three verification experiments were taked under this technology and the measured average content of geniposide was 564. 108 mg x g(-1), which was close to the model prediction: 563. 307 mg x g(-1). According to the verification test, the Gardeniae Fructus belt drying process is steady and feasible. So single factor experiments combined with response surface method (RSM) could be used to optimize the drying technology of Reduning injection Gardenia extract.

Evaluation of FY 1987 safety belt use law state enforcement grants

DOT National Transportation Integrated Search

1991-03-01

The report presents information and an evaluation of safety belt use law enforcement grants provided to 17 states through supplemental 403 grants during FY 1987. Elmira-type programs were to serve as a model in order to demonstrate that basic enforce...

Direct observation of safety belt use in Michigan : Fall 1998

DOT National Transportation Integrated Search

1998-10-01

Reported here are the results of a direct observation survey of safety belt use conducted in the fall of 1998. In this study, 11,413 occupants traveling in four vehicle types (passenger cars, sport utility vehicles, vans/minvans, and pickup trucks) w...

Safety belt usage : survey of the traffic population

DOT National Transportation Integrated Search

1978-01-01

The objectives of this study were to assess safety belt usage in cars manufactured between 1964 and 1977 and to examine usage as a function of type of car, driver characteristics, and driving environment. A survey of passenger cars in 16 cities was c...

Direct observation of safety belt use in Michigan : Fall 1999

DOT National Transportation Integrated Search

1999-01-01

Reported here are the results of a direct observation survey of safety belt use conducted in the fall of 1999. In this study, 9,414 occupants traveling in four vehicle types (passenger cars, sport-utility vehicles, vans/minivans, and pickup trucks) w...

Punched belt hole position deviation analysis of float type water level gauge

NASA Astrophysics Data System (ADS)

Mao, Chunlei; Wang, Tao; Fu, Weijie; Li, Lianhui

2018-03-01

The key parts of the float type water level gauge instrument is perforated belt, The size and tolerance requirements of its aperture is: (1) alternation of 100+0.2 and 100-0.2, (2) 200±0.1, (3) 1000±0.15, (4) 10000±0.2. The single hole position: alternation of 100+0.2 and 100-0.2; double: 200±0.1, and ensure the best hole position error avoidance tends to be one-way, that is to say: when the punched belt combined with a water wheel rotating line moving, The hole position error to single direction increase or decrease, caused the water level nail gradually and close to the edge of the hole, and then edge and final punched belt was lifted. This paper uses the laser drilling process of steel strip for data collection and analysis. It is found that this method cannot meet the tolerance requirements and the double stamping processing method with adjustable cylindrical pin is feasible.

Plantarflexion moment is a contributor to step length after-effect following walking on a split-belt treadmill in individuals with stroke and healthy individuals.

PubMed

Lauzière, Séléna; Miéville, Carole; Betschart, Martina; Duclos, Cyril; Aissaoui, Rachid; Nadeau, Sylvie

2014-10-01

To assess plantarflexion moment and hip joint moment after-effects following walking on a split-belt treadmill in healthy individuals and individuals post-stroke. Cross-sectional study. Ten healthy individuals (mean age 57.6 years (standard deviation; SD 17.2)) and twenty individuals post-stroke (mean age 49.3 years (SD 13.2)). Participants walked on an instrumented split-belt treadmill under 3 gait periods: i) baseline (tied-belt); ii) adaptation (split-belt); and iii) post-adaptation (tied-belt). Participants post-stroke performed the protocol with the paretic and nonparetic leg on the faster belt when belts were split. Kinematic data were recorded with the Optotrak system and ground reaction forces were collected via the instrumented split-belt treadmill. In both groups, the fast plantarflexion moment was reduced and the slow plantarflexion moment was increased from mid-stance to toe-off in the post-adaptation period. Significant relationships were found between the plantarflexion moment and contralateral step length. Split-belt treadmills could be useful for restoring step length symmetry in individuals post-stroke who present with a longer paretic step length because the use of this type of intervention increases paretic plantarflexion moments. This intervention might be less recommended for individuals post-stroke with a shorter paretic step length because it reduces the paretic plantarflexion moment.

A Maximum Likelihood Ensemble Data Assimilation Method Tailored to the Inner Radiation Belt

NASA Astrophysics Data System (ADS)

Guild, T. B.; O'Brien, T. P., III; Mazur, J. E.

2014-12-01

The Earth's radiation belts are composed of energetic protons and electrons whose fluxes span many orders of magnitude, whose distributions are log-normal, and where data-model differences can be large and also log-normal. This physical system thus challenges standard data assimilation methods relying on underlying assumptions of Gaussian distributions of measurements and data-model differences, where innovations to the model are small. We have therefore developed a data assimilation method tailored to these properties of the inner radiation belt, analogous to the ensemble Kalman filter but for the unique cases of non-Gaussian model and measurement errors, and non-linear model and measurement distributions. We apply this method to the inner radiation belt proton populations, using the SIZM inner belt model [Selesnick et al., 2007] and SAMPEX/PET and HEO proton observations to select the most likely ensemble members contributing to the state of the inner belt. We will describe the algorithm, the method of generating ensemble members, our choice of minimizing the difference between instrument counts not phase space densities, and demonstrate the method with our reanalysis of the inner radiation belt throughout solar cycle 23. We will report on progress to continue our assimilation into solar cycle 24 using the Van Allen Probes/RPS observations.

Using a Split-belt Treadmill to Evaluate Generalization of Human Locomotor Adaptation.

PubMed

Vasudevan, Erin V L; Hamzey, Rami J; Kirk, Eileen M

2017-08-23

Understanding the mechanisms underlying locomotor learning helps researchers and clinicians optimize gait retraining as part of motor rehabilitation. However, studying human locomotor learning can be challenging. During infancy and childhood, the neuromuscular system is quite immature, and it is unlikely that locomotor learning during early stages of development is governed by the same mechanisms as in adulthood. By the time humans reach maturity, they are so proficient at walking that it is difficult to come up with a sufficiently novel task to study de novo locomotor learning. The split-belt treadmill, which has two belts that can drive each leg at a different speed, enables the study of both short- (i.e., immediate) and long-term (i.e., over minutes-days; a form of motor learning) gait modifications in response to a novel change in the walking environment. Individuals can easily be screened for previous exposure to the split-belt treadmill, thus ensuring that all experimental participants have no (or equivalent) prior experience. This paper describes a typical split-belt treadmill adaptation protocol that incorporates testing methods to quantify locomotor learning and generalization of this learning to other walking contexts. A discussion of important considerations for designing split-belt treadmill experiments follows, including factors like treadmill belt speeds, rest breaks, and distractors. Additionally, potential but understudied confounding variables (e.g., arm movements, prior experience) are considered in the discussion.

Combined Global MHD and Test-Particle Simulation of a Radiation Belt Storm: Comparing Depletion, Recovery and Enhancement with in Situ Measurements

NASA Astrophysics Data System (ADS)

Sorathia, K.; Ukhorskiy, A. Y.; Merkin, V. G.; Wiltberger, M. J.; Lyon, J.; Claudepierre, S. G.; Fennell, J. F.

2017-12-01

During geomagnetic storms the intensities of radiation belt electrons exhibit dramatic variability. In the main phase electron intensities exhibit deep depletion over a broad region of the outer belt. The intensities then increase during the recovery phase, often to levels that significantly exceed their pre-storm values. In this study we analyze the depletion, recovery and enhancement of radiation belt intensities during the 2013 St. Patrick's geomagnetic storm. We simulate the dynamics of high-energy electrons using our newly-developed test-particle radiation belt model (CHIMP) based on a hybrid guiding-center/Lorentz integrator and electromagnetic fields derived from high-resolution global MHD (LFM) simulations. Our approach differs from previous work in that we use MHD flow information to identify and seed test-particles into regions of strong convection in the magnetotail. We address two science questions: 1) what are the relative roles of magnetopause losses, transport-driven atmospheric precipitation, and adiabatic cooling in the radiation belt depletion during the storm main phase? and 2) to what extent can enhanced convection/mesoscale injections account for the radiation belt buildup during the recovery phase? Our analysis is based on long-term model simulation and the comparison of our model results with electron intensity measurements from the MAGEIS experiment of the Van Allen Probes mission.

Integrating gravity and magnetic field data to delineate structurally controlled gold mineralization in the Sefwi Belt of Ghana

NASA Astrophysics Data System (ADS)

Konadu Amoah, Bernard; Dadzie, Isaac; Takyi-Kyeremeh, Kwaku

2018-08-01

Gravity and magnetic surveys were used to delineate potential gold mineralization zones in the Sefwi belt of Ghana. The study area is an intrusive dominated area that hosts pockets of small scale mining operations locally referred to as Galamsey. These Galamsey operations are not guided by a scientific approach to back the trend of gold mineralization which is conventionally mined. The study aimed at mapping lithological units, structural setting and relating Galamsey sites to delineate potential zones of gold mineralization. A Scintrex CG5 gravimeter and GEM’s Overhauser magnetometer were used for gravity and magnetic data acquisition respectively. The magnetic data were corrected and enhancing filters such as reduction to the pole (RTP), analytical signal and first vertical derivative were applied using Oasis montaj 7.1. Gravity data were also reduced to the geoid using the Oasis montaj software to produce a complete Bouguer anomaly map. The regional/residual separation technique produced a residual gravity map. The RTP and analytical signal filters from the magnetic data and residual gravity anomaly map from the gravity data helped in mapping belt type (Dixcove) Birimian granitoids and mafic intrusive unit, interpreted as gabbro. The first vertical derivative filter was useful in mapping NE/SW minor faults and crosscutting dykes largely concentrated in the belt type Birimian granitoids. All the three mapped Galamsey sites fell on a minor fault and are associated with the belt type granitoids which were used in delineating four potential zones of gold mineralization.

Optical Images of an Exosolar Planet 25 Light-Years from Earth

NASA Technical Reports Server (NTRS)

Clampin, Mark

2008-01-01

Fomalhaut is a bright star 7.7 parsec (25 light year) from Earth that harbors a belt of cold dust with a structure consistent with gravitational sculpting by an orbiting planet. Here, we present optical observations of an exoplanet candidate. Fomalhaut b. In the plane of the belt, Fomalhaut b lies approximately 119 astronomical units (AU) from the star, and within 18 All of the dust belt. We detect counterclockwise orbital motion using Hubble Space Telescope observations separated by 1.73 years. Dynamical models of the interaction between the planet and the belt indicate that the planet's mass is at most three times that of Jupiter for the belt to avoid gravitational disruption. The flux detected at 0.8 micron flux is also consistent with that of a planet with mass a few limes that of Jupiter. The brightness at 0.6 microns and the lack of detection at longer wavelengths suggest that the detected flux may include starlight reflected off a circumplanetary disk, with dimension comparable to the orbits of the Galilean satellites. We also observed variability of unknown origin at 0.6 microns.

Optical Images of an Exosolar Planet 25 Light Years from Earth

NASA Technical Reports Server (NTRS)

Kalas, Paul; Graham, James R.; Chiang, Eugene; Fitzgerald, Michael P.; Clampin, Mark; Kite, Edwin S.; Stapelfeldt, Karl; Marois, Christian; Krist, John

2008-01-01

Fomalhaut is a bright star 7.7 parsecs (25 light years) from Earth that harbors a belt of cold dust with a structure consistent with gravitational sculpting by an orbiting planet. Here, we present optical observations of an exoplanet candidate, Fomalhaut b. In the plane of the belt, Fomalhaut b lies approximately 119 astronomical units (AU) from the star and 18 AU from the dust belt, matching predictions. We detect counterclockwise orbital motion using Hubble Space Telescope observations separated by 1.73 years. Dynamical models of the interaction between the planet and the belt indicate that the planet's mass is at most three times that of Jupiter for the belt to avoid gravitational disruption. The flux detected at 0.8 m is also consistent with that of a planet with mass no greater than a few times that of Jupiter. The brightness at 0.6 micron and the lack of detection at longer wavelengths suggest that the detected flux may include starlight reflected off a circumplanetary disk, with dimension comparable to the orbits of the Galilean satellites. We also observed variability of unknown origin at 0.6 micron.

Trace element mobility in dolomitic argillites of the Mesoproterozoic Belt-Purcell Supergroup, Western North America

NASA Astrophysics Data System (ADS)

González-Álvarez, Ignacio; Kerrich, Robert

2011-04-01

The Belt-Purcell Supergroup comprises dolomite-rich stratigraphic units in a dominantly siliciclastic succession, where sedimentation spans 1400-1470 Ma. Dolomitic units are variable mixtures of co-sedimented argillite and primary carbonate post-depositionally converted to secondary dolomite. Based on rare earth element (REE) relationships three distinct REE patterns are identified in the dolomite-rich units: Type 1 (T1d; d = dolomitic sample) with REE patterns parallel to post-Archean Upper Continental Crust (PA-UCC), albeit at lower absolute abundances due to dilution by carbonate content; Type 2 (T2d) with Heavy REE (HREE) enrichment but Light REE (LREE) depletion relative to T1d; and Type 3 (T3d) with enrichment in LREE and HREE relative to T1d, but erratic Middle REE (MREE) patterns. There is a progressive increase of ΣREE from T1d through T2d to T3d, whereas for ΣLREE/ΣHREE T2d < T1d < T3d. T1d-T2d and T3d represent three different "snapshots" of a continuous process. In terms of timing, dolomitization of calcite primary sediment in all samples likely took place broadly during burial diagenesis, as inferred for most Proterozoic dolomites. T1d is easily explained by provenance: however, T2d and T3d cannot be related to provenance, weathering or sedimentary sorting processes to explain higher concentrations of HREE referenced to PA-UCC and consequently developed in the sediment from a T1d precursor. The same three REE signatures have been described in previous studies in counterpart siliciclastic counterparts throughout the Belt-Purcell Supergroup at three different locations. Mobility of normally stable REE is accompanied by mobility of normally isochemical high field strength elements (HFSE) in T2d and T3d to give REE/REE, HFSE/HFSE, REE/HFSE and Y/HREE fractionations. No specific REE-HFSE signatures are apparent in the carbonate-rich units as compared to their non-dolomitic siliciclastic counterparts. This unusual mobility of REE and HFSE reflected in T2d and T3d is attributed to alkaline oxidizing post-depositional brines. Salinity was derived from seawater-sediment reactions, dissolution of evaporite minerals, and the smectite-illite transformation, whereas alkaline oxidizing conditions were promoted by groundwater interaction with mafic units in the basin, CO 2 introduced into the system during episodic rifting with mantle degassing, and interaction of syn-sedimentary mafic intrusions with carbonate units at early stages of BPS deposition. Intermittent brine activity, inducing T2d and T3d patterns, spanned >1 Ga as recorded by secondary monazite grains with age distributions that correspond to large scale tectono-thermal events in Laurentia. Post-depositional processes and redistribution of carbonate can have an impact on transitional stratigraphic contacts between dolomitic and siliciclastic units which may have been incorrectly described as primary due to sedimentary environment changes.

Interface for liquid chromatograph-mass spectrometer

DOEpatents

Andresen, B.D.; Fought, E.R.

1989-09-19

A moving belt interface is described for real-time, high-performance liquid chromatograph (HPLC)/mass spectrometer (MS) analysis which strips away the HPLC solvent as it emerges from the end of the HPLC column and leaves a residue suitable for mass-spectral analysis. The interface includes a portable, stand-alone apparatus having a plural stage vacuum station, a continuous ribbon or belt, a drive train magnetically coupled to an external drive motor, a calibrated HPLC delivery system, a heated probe tip and means located adjacent the probe tip for direct ionization of the residue on the belt. The interface is also capable of being readily adapted to fit any mass spectrometer. 8 figs.

Interface for liquid chromatograph-mass spectrometer

DOEpatents

Andresen, Brian D.; Fought, Eric R.

1989-01-01

A moving belt interface for real-time, high-performance liquid chromatograph (HPLC)/mass spectrometer (MS) analysis which strips away the HPLC solvent as it emerges from the end of the HPLC column and leaves a residue suitable for mass-spectral analysis. The interface includes a portable, stand-alone apparatus having a plural stage vacuum station, a continuous ribbon or belt, a drive train magnetically coupled to an external drive motor, a calibrated HPLC delivery system, a heated probe tip and means located adjacent the probe tip for direct ionization of the residue on the belt. The interface is also capable of being readily adapted to fit any mass spectrometer.

Evidence for a complex archean deformational history; southwestern Michipicoten Greenstone Belt, Ontario

NASA Technical Reports Server (NTRS)

Mcgill, George E.; Shrady, Catherine H.

1986-01-01

The Michipicoten Greenstone Belt extends for about 150 km ENE from the northeastern angle of Lake Superior. In common with many other Archean greenstone belts, it is characterized by generally steep bedding dips and a distribution of major lithologic types suggesting a crudely synclinal structure for the belt as a whole. Detailed mapping and determination of structural sequence demonstrates that the structure is much more complex. The Archean history of the belt includes formation of at least three regionally significant cleavages, kilometer-scale overturning, extensive shearing, and diabase intrusion. Most well defined, mappable 'packages' of sedimentary rocks appear to be bounded by faults. These faults were active relatively early in the structural history of the belt, when extensive overturning also occurred. Steepening of dips, NW-SE shortening, development of steep NE cleavage, and pervasive shearing all postdate the early faulting and the regional overturning, obscuring much of the detail needed to define the geometry of the earlier structures. The results obtained so far suggest, however, that the Michipicoten Greenstone Belt underwent an early stage of thrusting and associated isoclinal folding, probably in a convergent tectonic environment.

Statistical analysis of corn yields responding to climate variability at various spatio-temporal resolutions

NASA Astrophysics Data System (ADS)

Jiang, H.; Lin, T.

2017-12-01

Rain-fed corn production systems are subject to sub-seasonal variations of precipitation and temperature during the growing season. As each growth phase has varied inherent physiological process, plants necessitate different optimal environmental conditions during each phase. However, this temporal heterogeneity towards climate variability alongside the lifecycle of crops is often simplified and fixed as constant responses in large scale statistical modeling analysis. To capture the time-variant growing requirements in large scale statistical analysis, we develop and compare statistical models at various spatial and temporal resolutions to quantify the relationship between corn yield and weather factors for 12 corn belt states from 1981 to 2016. The study compares three spatial resolutions (county, agricultural district, and state scale) and three temporal resolutions (crop growth phase, monthly, and growing season) to characterize the effects of spatial and temporal variability. Our results show that the agricultural district model together with growth phase resolution can explain 52% variations of corn yield caused by temperature and precipitation variability. It provides a practical model structure balancing the overfitting problem in county specific model and weak explanation power in state specific model. In US corn belt, precipitation has positive impact on corn yield in growing season except for vegetative stage while extreme heat attains highest sensitivity from silking to dough phase. The results show the northern counties in corn belt area are less interfered by extreme heat but are more vulnerable to water deficiency.

Linking the collisional history of the main asteroid belt to its dynamical excitation and depletion

NASA Astrophysics Data System (ADS)

Bottke, William F.; Durda, Daniel D.; Nesvorný, David; Jedicke, Robert; Morbidelli, Alessandro; Vokrouhlický, David; Levison, Harold F.

2005-12-01

The main belt is believed to have originally contained an Earth mass or more of material, enough to allow the asteroids to accrete on relatively short timescales. The present-day main belt, however, only contains ˜5×10 Earth masses. Numerical simulations suggest that this mass loss can be explained by the dynamical depletion of main belt material via gravitational perturbations from planetary embryos and a newly-formed Jupiter. To explore this scenario, we combined dynamical results from Petit et al. [Petit, J. Morbidelli, A., Chambers, J., 2001. The primordial excitation and clearing of the asteroid belt. Icarus 153, 338-347] with a collisional evolution code capable of tracking how the main belt undergoes comminution and dynamical depletion over 4.6 Gyr [Bottke, W.F., Durda, D., Nesvorny, D., Jedicke, R., Morbidelli, A., Vokrouhlický, D., Levison, H., 2005. The fossilized size distribution of the main asteroid belt. Icarus 175, 111-140]. Our results were constrained by the main belt's size-frequency distribution, the number of asteroid families produced by disruption events from diameter D>100 km parent bodies over the last 3-4 Gyr, the presence of a single large impact crater on Vesta's intact basaltic crust, and the relatively constant lunar and terrestrial impactor flux over the last 3 Gyr. We used our model to set limits on the initial size of the main belt as well as Jupiter's formation time. We find the most likely formation time for Jupiter was 3.3±2.6 Myr after the onset of fragmentation in the main belt. These results are consistent with the estimated mean disk lifetime of 3 Myr predicted by Haisch et al. [Haisch, K.E., Lada, E.A., Lada, C.J., 2001. Disk frequencies and lifetimes in young clusters. Astrophys. J. 553, L153-L156]. The post-accretion main belt population, in the form of diameter D≲1000 km planetesimals, was likely to have been 160±40 times the current main belt's mass. This corresponds to 0.06-0.1 Earth masses, only a small fraction of the total mass thought to have existed in the main belt zone during planet formation. The remaining mass was most likely taken up by planetary embryos formed in the same region. Our results suggest that numerous D>200 km planetesimals disrupted early in Solar System history, but only a small fraction of their fragments survived the dynamical depletion event described above. We believe this may explain the limited presence of iron-rich M-type, olivine-rich A-type, and non-Vesta V-type asteroids in the main belt today. The collisional lifetimes determined for main belt asteroids agree with the cosmic ray exposure ages of stony meteorites and are consistent with the limited collisional evolution detected among large Koronis family members. Using the same model, we investigated the near-Earth object (NEO) population. We show the shape of the NEO size distribution is a reflection of the main belt population, with main belt asteroids driven to resonances by Yarkovsky thermal forces. We used our model of the NEO population over the last 3 Gyr, which is consistent with the current population determined by telescopic and satellite data, to explore whether the majority of small craters ( D<0.1-1 km) formed on Mercury, the Moon, and Mars were produced by primary impacts or by secondary impacts generated by ejecta from large craters. Our results suggest that most small craters formed on these worlds were a by-product of secondary rather than primary impacts.

Spectral observations of 19 weathered and 23 fresh NEAs and their correlations with orbital parameters

NASA Astrophysics Data System (ADS)

Fevig, Ronald A.; Fink, Uwe

2007-05-01

Results of our visible to near-infrared spectrophotometric observations of 41 near-Earth asteroids (NEAs) are reported. These moderate-resolution spectra, along with 14 previously published spectra from our earlier survey [Hicks, M.D., Fink, U., Grundy, W.M., 1998. Icarus 133, 69-78] show a preponderance of spectra consistent with ordinary chondrites (23 NEAs with this type of spectrum, along with 19 S-types and 13 in other taxonomic groups). There exists statistically significant evidence for orbit-dependent trends in our data. While S-type NEAs from our survey reside primarily in (1) Amor orbits or (2) Aten or Apollo orbits which do not cross the asteroid main-belt, the majority of objects with spectra consistent with ordinary chondrites in our survey are in highly eccentric Apollo orbits which enter the asteroid main-belt. This trend toward fresh, relatively unweathered NEAs with ordinary chondrite type spectra in highly eccentric Apollo orbits is attributed to one or a combination of three possible causes: (1) the chaotic nature of NEA orbits can easily result in high eccentricity orbits/large aphelion distances so that they can enter the collisionally enhanced environment in the main-belt, exposing fresh surfaces, (2) they have recently been injected into such orbits after a collision in the main-belt, or (3) such objects cross the orbits of several terrestrial planets, causing tidal disruption events that expose fresh surfaces.

The use of generalized estimating equations in the analysis of motor vehicle crash data.

PubMed

Hutchings, Caroline B; Knight, Stacey; Reading, James C

2003-01-01

The purpose of this study was to determine if it is necessary to use generalized estimating equations (GEEs) in the analysis of seat belt effectiveness in preventing injuries in motor vehicle crashes. The 1992 Utah crash dataset was used, excluding crash participants where seat belt use was not appropriate (n=93,633). The model used in the 1996 Report to Congress [Report to congress on benefits of safety belts and motorcycle helmets, based on data from the Crash Outcome Data Evaluation System (CODES). National Center for Statistics and Analysis, NHTSA, Washington, DC, February 1996] was analyzed for all occupants with logistic regression, one level of nesting (occupants within crashes), and two levels of nesting (occupants within vehicles within crashes) to compare the use of GEEs with logistic regression. When using one level of nesting compared to logistic regression, 13 of 16 variance estimates changed more than 10%, and eight of 16 parameter estimates changed more than 10%. In addition, three of the independent variables changed from significant to insignificant (alpha=0.05). With the use of two levels of nesting, two of 16 variance estimates and three of 16 parameter estimates changed more than 10% from the variance and parameter estimates in one level of nesting. One of the independent variables changed from insignificant to significant (alpha=0.05) in the two levels of nesting model; therefore, only two of the independent variables changed from significant to insignificant when the logistic regression model was compared to the two levels of nesting model. The odds ratio of seat belt effectiveness in preventing injuries was 12% lower when a one-level nested model was used. Based on these results, we stress the need to use a nested model and GEEs when analyzing motor vehicle crash data.

Functional traits predict relationship between plant abundance dynamic and long-term climate warming

PubMed Central

Soudzilovskaia, Nadejda A.; Elumeeva, Tatiana G.; Onipchenko, Vladimir G.; Shidakov, Islam I.; Salpagarova, Fatima S.; Khubiev, Anzor B.; Tekeev, Dzhamal K.; Cornelissen, Johannes H. C.

2013-01-01

Predicting climate change impact on ecosystem structure and services is one of the most important challenges in ecology. Until now, plant species response to climate change has been described at the level of fixed plant functional types, an approach limited by its inflexibility as there is much interspecific functional variation within plant functional types. Considering a plant species as a set of functional traits greatly increases our possibilities for analysis of ecosystem functioning and carbon and nutrient fluxes associated therewith. Moreover, recently assembled large-scale databases hold comprehensive per-species data on plant functional traits, allowing a detailed functional description of many plant communities on Earth. Here, we show that plant functional traits can be used as predictors of vegetation response to climate warming, accounting in our test ecosystem (the species-rich alpine belt of Caucasus mountains, Russia) for 59% of variability in the per-species abundance relation to temperature. In this mountain belt, traits that promote conservative leaf water economy (higher leaf mass per area, thicker leaves) and large investments in belowground reserves to support next year’s shoot buds (root carbon content) were the best predictors of the species increase in abundance along with temperature increase. This finding demonstrates that plant functional traits constitute a highly useful concept for forecasting changes in plant communities, and their associated ecosystem services, in response to climate change. PMID:24145400

A case of hemothorax following seat-belt injury with a bulla in the apex of the lung: a subtype of spontaneous hemopneumothorax.

PubMed

Kinoshita, Haruyuki; Akiyama, Naoko; Murao, Masaki; Yamauchi, Yosuke; Nakamura, Teruya; Sekiya, Naosumi; Toyota, Naoyuki; Miyagatani, Yasusuke

2015-05-01

We experienced a case of a subtype of spontaneous hemopneumothorax caused by external forces associated with a seat-belt injury. A female aged 39 years sustained a minor collision with an oncoming car while she was driving. Although pneumothorax was not detected, hemothorax and bleeding from the area surrounding the subclavian artery were observed on contrast-enhanced chest computed tomography (CT). After confirming continuous bleeding into the thoracic cavity after superselective arterial embolization, we performed emergency open surgery. We found a bulla in the apex of the lung, and the thoracic stump of the bulla was considered the source of bleeding. In this case, the direct cause of hemothorax was considered to be the external force associated with the seat-belt injury. When a bulla in the apex of the lung and continuous bleeding are both observed on CT, spontaneous hemopneumothorax should be suspected, necessitating open chest surgery in cases where pneumothorax is not observed.

Occupant and Crash Characteristics in Thoracic and Lumbar Spine Injuries Resulting From Motor Vehicle Collisions

PubMed Central

Rao, Raj D.; Berry, Chirag; Yoganandan, Narayan; Agarwal, Arnav

2016-01-01

Background context Motor vehicle collisions (MVC) are a leading cause of thoracic and lumbar (T and L) spine injuries. Mechanisms of injury in vehicular crashes that result in thoracic and lumbar fractures and the spectrum of injury in these occupants have not been extensively studied in the literature. Purpose The objective was to investigate the patterns of T and L spine injury following MVC; correlate these patterns with restraint use, crash characteristics and demographic variables; and study the associations of these injuries with general injury morbidity and fatality. Study design/Setting Retrospective study of a prospectively gathered database. Patient sample Six hundred and thirty-one occupants with T and L (T1-L5) spine injuries from 4572 occupants included in the Crash Injury Research and Engineering Network (CIREN) database between 1996 and 2011. Outcome measures No clinical outcome measures were evaluated in this study. Methods The CIREN database includes moderate to severely injured occupants from MVC involving vehicles manufactured recently. Demographic, injury and crash data from each patient was analyzed for correlations between pattern of T and L spine injury, associated extra-spinal injuries and overall injury severity score (ISS), type and use of seat belts, and other crash characteristics. T and L spine injury pattern was categorized using a modified Denis classification, to include extension injuries as a separate entity. Results T and L spine injuries were identified in 631 of 4572 vehicle occupants, of whom 299 sustained major injuries (including 21 extension injuries) and 332 sustained minor injuries. Flexion-distraction injuries were more prevalent in children and young adults, and extension injuries in older adults (mean age 65.7 years). Occupants with extension injuries had a mean BMI of 36.0 and a fatality rate of 23.8%, much higher than the fatality rate for the entire cohort (10.9%). The most frequent extra-spinal injuries (Abbreviated Injury Scale grade 2 or more) associated with T and L spine injuries involved the chest (seen in 65.6% of 631 occupants). In contrast to occupants with major T and L spine injuries, those with minor T and L spine injuries showed a strikingly greater association with pelvic and abdominal injuries. Occupants with minor T and L spine injuries had a higher mean ISS (27.1) than those with major T and L spine injuries (25.6). Among occupants wearing a three-point seat belt, 35.3% sustained T and L spine injuries, while only 11.6% of the unbelted occupants sustained T and L spine injuries. Three-point belted individuals were more likely to sustain burst fractures, while two-point belted occupants sustained flexion-distraction injuries most often, and unbelted occupants had a predilection for fracture-dislocations of the T and L spine. Three-point seat belts were protective against neurologic injury, higher ISS and fatality. Conclusions T and L spine fracture patterns are influenced by age of occupant and type and use of seat belts. Despite a reduction in overall injury severity and mortality, seat belt use is associated with an increased incidence of T and L spine fractures. Minor T and L spine fractures were associated with an increased likelihood of pelvic and abdominal injuries and higher ISS scores, demonstrating their importance in predicting overall injury severity. Extension injuries occurred in older, obese individuals, and were associated with a high fatality rate. Future advancements in automobile safety engineering should address the need to reduce T and L spine injuries in belted occupants. PMID:24486471

Angle stations in or for endless conveyor belts

DOEpatents

Steel, Alan

1987-04-07

In an angle station for an endless conveyor belt, there are presented to each incoming run of the belt stationary curved guide members (18, 19) of the shape of a major segment of a right-circular cylinder and having in the part-cylindrical portion (16 or 17) thereof rectangular openings (15) arranged in parallel and helical paths and through which project small freely-rotatable rollers (14), the continuously-changing segments of the curved surfaces of which projecting through said openings (15) are in attitude to change the direction of travel of the belt (13) through 90.degree. during passage of the belt about the part-cylindrical portion (16 or 17) of the guide member (18 or 19). The rectangular openings (15) are arranged with their longer edges lengthwise of the diagonals representing the mean of the helix but with those of a plurality of the rows nearest to each end of the part-cylindrical portion (16 or 17) slightly out of axial symmetry with said diagonals, being slightly inclined in a direction about the intersections (40) of the diagonals of the main portion of the openings, to provide a "toe-in" attitude in relation to the line of run of the endless conveyor belt.

Does raising type 1 error rate improve power to detect interactions in linear regression models? A simulation study.

PubMed

Durand, Casey P

2013-01-01

Statistical interactions are a common component of data analysis across a broad range of scientific disciplines. However, the statistical power to detect interactions is often undesirably low. One solution is to elevate the Type 1 error rate so that important interactions are not missed in a low power situation. To date, no study has quantified the effects of this practice on power in a linear regression model. A Monte Carlo simulation study was performed. A continuous dependent variable was specified, along with three types of interactions: continuous variable by continuous variable; continuous by dichotomous; and dichotomous by dichotomous. For each of the three scenarios, the interaction effect sizes, sample sizes, and Type 1 error rate were varied, resulting in a total of 240 unique simulations. In general, power to detect the interaction effect was either so low or so high at α = 0.05 that raising the Type 1 error rate only served to increase the probability of including a spurious interaction in the model. A small number of scenarios were identified in which an elevated Type 1 error rate may be justified. Routinely elevating Type 1 error rate when testing interaction effects is not an advisable practice. Researchers are best served by positing interaction effects a priori and accounting for them when conducting sample size calculations.

Wearing an abdominal belt increases diastolic blood pressure.

PubMed

Rafacz, W; McGill, S M

1996-09-01

The purpose of this study was to determine the effect of wearing an abdominal belt on blood pressure (systolic and diastolic) and heart rate during a variety of tasks. The belt was typical of the elastic type with suspenders and Velcro tabs for cinching the belt snug. The tasks performed included sitting at rest, sitting with the torso inclined forward at 45 degrees, standing with the torso inclined forward at 45 degrees (with and without holding an 11-kg weight), a trunk axial rotation task, and squat lifting. Blood pressure was monitored noninvasively with a FINAPRES blood pressure monitor. Twenty healthy men performed each task with and without the abdominal belt. Although no significant increases in mean systolic blood pressure or heart rate were found, there was a significant increase in diastolic blood pressure in all conditions. All people considering wearing an abdominal belt should also consider the risks and liability associated with the additional cardiovascular load, particularly heart attack and stroke.

Conceptual design of a moving belt radiator shuttle-attached experiments: Technical requirement Document

NASA Technical Reports Server (NTRS)

Aguilar, Jerry L.

1989-01-01

The technical requirements for a shuttle-attached Moving Belt Radiator (MBR) experiment are defined. The MBR is an advanced radiator concept in which a rotating belt radiates thermal energy to space. The requirements for integrating the MBR experiment in the shuttle bay are discussed. Requirements for the belt material and working fluid are outlined along with some possible options. The proposed size and relationship to a full scale Moving Belt Radiator are defined. The experiment is defined with the primary goal of dynamic testing and a secondary goal of demonstrating the sealing and heat transfer characteristics. A perturbation system which will simulate a docking maneuver or other type of short term acceleration is proposed for inclusion in the experimental apparatus. A deployment and retraction capability which will aid in evaluating the dynamics of a belt during such a maneuver is also described. The proposed test sequence for the experiment is presented. Details of the conceptual design are not presented herein, but rather in a separate Final Report.

10 Years of Student Questions about the Radiation Belts

NASA Astrophysics Data System (ADS)

Gross, N. A.; Hughes, W. J.; Wiltberger, M. J.

2016-12-01

The NSF funded CISM Space Weather Summer School is targeted to graduate students just starting in space physics and provides a comprehensive conceptual background to the field. Insights from this summer school can provide valuable information to graduate instructors and graduate student mentors. During the school, students are invited to submit questions at the end of the lecture component each day. The lecturers then take the time to respond to these questions. We have collected over 3000 student questions over the last 10 years. The radiation belts, solar energetic particles, and the operational impacts of high energy particles are among the topics covered during the summer school, and these topics consistently generate a share of the questions following those lectures. The collection includes questions about: the structure and variability of the radiation belts, the distinction between solar energetic particles (SEPs) and the radiation belts, the distinction between the ring current and the radiation belts, the impact radiation belt particles and SEPs have on the magnetosphere, the risks high energy particles pose to spacecraft and humans, their impact on operations, regulations for human exposure, and others. The presentation will catalog the questions asked by students and provide insight into students prior conceptions and misunderstandings about this topic. We hope this work informs instructors who teach these topics.

Simulating the Heterogeneity in Braided Channel Belt Deposits: 2. Examples of Results and Comparison to Natural Deposits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guin, Arijit; Ramanathan, Ramya; Ritzi, Robert W.

In Part 1 of this series we presented a methodology and a code for modeling the hierarchical sedimentary architecture in braided channel belt deposits. Here, in Part 2, the code was used to create a digital model of this architecture, and the corresponding spatial distribution of permeability. The simulated architecture was compared to the real stratal architecture observed in an abandoned channel belt of the Sagavanirktok River, Alaska by Lunt et al. (2004). The comparisons included assessments of similarity which were both qualitative and quantitative. From the qualitative comparisons we conclude that a synthetic deposit created by the code hasmore » unit types, at each level, with a geometry which is generally consistent with the geometry of unit types observed in the field. The digital unit types would generally be recognized as representing their counterparts in nature, including cross stratasets, lobate and scroll bar deposits, channel fills, etc. Furthermore, the synthetic deposit has a hierarchical spatial relationship among these units which represents how the unit types are observed in field exposures and in geophysical images. In quantitative comparisons the proportions and the length, width, and height of unit types at different scales, across all levels of the stratal hierarchy compare well between the digital and the natural deposits. A number of important attributes of the channel belt model were shown to be influenced by more than one level within the hierarchy of stratal architecture. First, the high-permeability open-framework gravels percolated at all levels and thus formed preferential flow pathways. Open framework gravels are indeed known to form preferential flow pathways in natural channel belt deposits. The nature of a percolating cluster changed across different levels of the hierarchy of stratal architecture. As a result of this geologic structure, the percolation occurs at proportions of open-framework gravels below the theoretical percolation threshold for random infinite media. Second, when the channel belt model was populated with permeability distributions by lowest-level unit type, the composite permeability semivariogram contained structures that were identifiable at more than one scale, and each of these structures could be directly linked to unit types of different scales existing at different levels within the hierarchy of strata. These collective results are encouraging with respect to our goal that this model be relevant as a base case in future studies for testing ideas in research addressing the upscaling problem in aquifers and reservoirs with multi-scale heterogeneity.« less

49 CFR 585.22 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Purpose. 585.22 Section 585.22 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Rear Inboard Lap/Shoulder Belt Phase...

49 CFR 585.22 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Purpose. 585.22 Section 585.22 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Rear Inboard Lap/Shoulder Belt Phase...

49 CFR 585.22 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Purpose. 585.22 Section 585.22 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Rear Inboard Lap/Shoulder Belt Phase...

49 CFR 585.25 - Records.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Records. 585.25 Section 585.25 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Rear Inboard Lap/Shoulder Belt Phase...

49 CFR 585.22 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Purpose. 585.22 Section 585.22 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Rear Inboard Lap/Shoulder Belt Phase...

49 CFR 585.22 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Purpose. 585.22 Section 585.22 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Rear Inboard Lap/Shoulder Belt Phase...

Computer Simulations and Literature Survey of Continuously Variable Transmissions for Use in Buses

DOT National Transportation Integrated Search

1981-12-01

Numerous studies have been conducted on the concept of flywheel energy storage for buses. Flywheel systems require a continuously variable transmission (CVT) of some type to transmit power between the flywheel and the drive wheels. However, a CVT can...

Risk of injury for occupants of motor vehicle collisions from unbelted occupants.

PubMed

MacLennan, P A; McGwin, G; Metzger, J; Moran, S G; Rue, L W

2004-12-01

Unbelted occupants may increase the risk of injury for other occupants in a motor vehicle collision (MVC). This study evaluated the association between occupant restraint use and the risk of injury (including death) to other vehicle occupants. A population based cohort study. United States. MVC occupants (n = 152 191 unweighted, n = 18 426 684 weighted) seated between a belted or unbelted occupant and the line of the principal direction of force in frontal, lateral, and rear MVCs were sampled from the 1991-2002 National Automotive Sampling System General Estimates System. Offset MVCs were not included in the study. Risk ratios and 95% confidence intervals for injury (including death) for occupants seated contiguous to unbelted occupants compared to occupants seated contiguous to belted occupants. Risk ratios were adjusted for at risk occupant's sex, age, seating position, vehicle type, collision type, travel speed, crash severity, and at risk occupants' own seat belt use. Exposure to unbelted occupants was associated with a 40% increased risk of any injury. Belted at risk occupants were at a 90% increased risk of injury but unbelted occupants were not at increased risk. Risks were similar for non-incapacitating and capacitating injuries. There was a 4.8-fold increased risk of death for exposed belted occupants but no increased risk of death for unbelted occupants. Belted occupants are at an increased risk of injury and death in the event of a MVC from unbelted occupants.

Risk of injury for occupants of motor vehicle collisions from unbelted occupants

PubMed Central

MacLennan, P; McGwin, G; Metzger, J; Moran, S; Rue, L

2004-01-01

Objective: Unbelted occupants may increase the risk of injury for other occupants in a motor vehicle collision (MVC). This study evaluated the association between occupant restraint use and the risk of injury (including death) to other vehicle occupants. Design: A population based cohort study. Setting: United States. Subjects: MVC occupants (n = 152 191 unweighted, n = 18 426 684 weighted) seated between a belted or unbelted occupant and the line of the principal direction of force in frontal, lateral, and rear MVCs were sampled from the 1991–2002 National Automotive Sampling System General Estimates System. Offset MVCs were not included in the study. Main outcome measure: Risk ratios and 95% confidence intervals for injury (including death) for occupants seated contiguous to unbelted occupants compared to occupants seated contiguous to belted occupants. Risk ratios were adjusted for at risk occupant's sex, age, seating position, vehicle type, collision type, travel speed, crash severity, and at risk occupants' own seat belt use. Results: Exposure to unbelted occupants was associated with a 40% increased risk of any injury. Belted at risk occupants were at a 90% increased risk of injury but unbelted occupants were not at increased risk. Risks were similar for non-incapacitating and capacitating injuries. There was a 4.8-fold increased risk of death for exposed belted occupants but no increased risk of death for unbelted occupants. Conclusions: Belted occupants are at an increased risk of injury and death in the event of a MVC from unbelted occupants. PMID:15583258

Effects of chorus, hiss and electromagnetic ion cyclotron waves on radiation belt dynamics (Invited)

NASA Astrophysics Data System (ADS)

Horne, R. B.

2013-12-01

Wave-particle interactions are known to play an important role in the acceleration and loss of radiation belt electrons, and in the heating and loss of ring current ions. The effectiveness of each wave type on radiation belt dynamics depends on the solar wind interaction with the magnetosphere and the properties of the waves which vary considerably with magnetic local time, radial distance and latitude. Furthermore the interaction of the waves with the particles is usually nonlinear. These factors present a major challenge to test and verify the theories. Here we discuss the role of several types of waves, including whistler mode chorus, plasmaspheric hiss, magnetosonic and electromagnetic ion cyclotron waves, in relation to radiation belt and ring current dynamics. We present simulations of the radiation belts using the BAS radiation belt model which includes the effects of chorus, hiss and EMIC waves along with radial diffusion. We show that chorus waves are required to form the peaks in the electron phase space density during storms, and that this occurs inside geostationary orbit. We compare simulations against observations in medium Earth orbit and the new results from Van Allen probes mission that shows conclusive evidence for a local electron acceleration process near L=4.5. We show the relative importance of plasmaspheric hiss and chorus and the location of the plasmapause for radiation belt dynamics near L=4.5 and demonstrate the losses due to EMIC waves that should occur at high energies. Finally we show how improving our basic physical understanding through missions such as Van Allen probes go to improve space weather forecasting in projects such as SPACECAST and have a direct benefit to society.

Anaerosalibacter bizertensis gen. nov., sp. nov., a halotolerant bacterium isolated from sludge.

PubMed

Rezgui, Raja; Maaroufi, Abderrazak; Fardeau, Marie-Laure; Ben Ali Gam, Zouhaier; Cayol, Jean-Luc; Ben Hamed, Saïd; Labat, Marc

2012-10-01

A strictly anaerobic, halotolerant and thermotolerant strain, designated C5BEL(T), was isolated in north Tunisia from storage tanks holding waste generated by the recycling of discarded motor oils. Cells of strain C5BEL(T) were Gram-stain-positive, motile by laterally inserted flagella, straight, and spore-forming. Their two major fatty acids were iso-C(15 : 0) and iso-C(15 : 0) dimethyl acetal. Growth was observed at temperatures of 25-55 °C (optimum, 40 °C) and at pH 6-9 (optimum, pH 7.5). The salinity range for growth was 0-100 g l(-1) NaCl (optimum, 5 g l(-1)). Yeast extract was required for growth. Strain C5BEL(T) was heterotrophic, able to use glucose, pyruvate, succinate, yeast extract, bio-trypticase and peptone, but unable to grow on Casamino acids. Sulfate, thiosulfate, sulfite, elemental sulfur, fumarate, nitrate and nitrite were not reduced. The DNA G+C content of strain C5BEL(T) was 31.1 mol%. 16S rRNA gene sequence analysis indicated that strain C5BEL(T) was a member of the family Clostridiaceae, class Clostridia, phylum Firmicutes and was most closely related to Sporanaerobacter acetigenes Lup33(T) ( = DSM 13106(T)) (92.4 % similarity). On the basis of 16S rRNA gene sequence comparisons and physiological characteristics, strain C5BEL(T) can be classified as a novel species in a new genus, for which the name Anaerosalibacter bizertensis gen. nov., sp. nov. is proposed. The type strain of the type species is C5BEL(T) ( = DSM 23801(T) = JCM 17239(T)).

Time-Integral Correlations of Multiple Variables With the Relativistic-Electron Flux at Geosynchronous Orbit: The Strong Roles of Substorm-Injected Electrons and the Ion Plasma Sheet

NASA Astrophysics Data System (ADS)

Borovsky, Joseph E.

2017-12-01

Time-integral correlations are examined between the geosynchronous relativistic electron flux index Fe1.2 and 31 variables of the solar wind and magnetosphere. An "evolutionary algorithm" is used to maximize correlations. Time integrations (into the past) of the variables are found to be superior to time-lagged variables for maximizing correlations with the radiation belt. Physical arguments are given as to why. Dominant correlations are found for the substorm-injected electron flux at geosynchronous orbit and for the pressure of the ion plasma sheet. Different sets of variables are constructed and correlated with Fe1.2: some sets maximize the correlations, and some sets are based on purely solar wind variables. Examining known physical mechanisms that act on the radiation belt, sets of correlations are constructed (1) using magnetospheric variables that control those physical mechanisms and (2) using the solar wind variables that control those magnetospheric variables. Fe1.2-increasing intervals are correlated separately from Fe1.2-decreasing intervals, and the introduction of autoregression into the time-integral correlations is explored. A great impediment to discerning physical cause and effect from the correlations is the fact that all solar wind variables are intercorrelated and carry much of the same information about the time sequence of the solar wind that drives the time sequence of the magnetosphere.

Yield response to landscape position under variable N for irrigated corn

USDA-ARS?s Scientific Manuscript database

Variable nutrient and water supply can result in spatial and temporal variation in crop yield within a given agricultural field. For the western Corn Belt, irrigated corn accounts for 58% of total annual corn production with the majority grown in Nebraska. Although irrigation decreases temporal yi...

Everyday multitasking habits: University students seamlessly text and walk on a split-belt treadmill.

PubMed

Hinton, Dorelle Clare; Cheng, Yeu-Yao; Paquette, Caroline

2018-01-01

With increasing numbers of adults owning a cell phone, walking while texting has become common in daily life. Previous research has shown that walking is not entirely automated and when challenged with a secondary task, normal walking patterns are disrupted. This study investigated the effects of texting on the walking patterns of healthy young adults while walking on a split-belt treadmill. Following full adaptation to the split-belt treadmill, thirteen healthy adults (23±3years) walked on a tied-belt and split-belt treadmill, both with and without a simultaneous texting task. Inertial-based movement monitors recorded spatiotemporal components of gait and stability. Measures of spatial and temporal gait symmetry were calculated to compare gait patterns between treadmill (tied-belt and split-belt) and between texting (absent or present) conditions. Typing speed and accuracy were recorded to monitor texting performance. Similar to previous research, the split-belt treadmill caused an alteration to both spatial and temporal aspects of gait, but not to time spent in dual support or stability. However, all participants successfully maintained balance while walking and were able to perform the texting task with no significant change to accuracy or speed on either treadmill. From this paradigm it is evident that when university students are challenged to text while walking on either a tied-belt or split-belt treadmill, without any other distraction, their gait is minimally affected and they are able to maintain texting performance. Copyright © 2017 Elsevier B.V. All rights reserved.

AGT-102 automotive gas turbine

NASA Technical Reports Server (NTRS)

1981-01-01

Development of a gas turbine powertrain with a 30% fuel economy improvement over a comparable S1 reciprocating engine, operation within 0.41 HC, 3.4 CO, and 0.40 NOx grams per mile emissions levels, and ability to use a variety of alternate fuels is summarized. The powertrain concept consists of a single-shaft engine with a ceramic inner shell for containment of hot gasses and support of twin regenerators. It uses a fixed-geometry, lean, premixed, prevaporized combustor, and a ceramic radial turbine rotor supported by an air-lubricated journal bearing. The engine is coupled to the vehicle through a widerange continuously variable transmission, which utilizes gearing and a variable-ratio metal compression belt. A response assist flywheel is used to achieve acceptable levels of engine response. The package offers a 100 lb weight advantage in a Chrysler K Car front-wheel-drive installation. Initial layout studies, preliminary transient thermal analysis, ceramic inner housing structural analysis, and detailed performance analysis were carried out for the basic engine.

Jupiter's Thermal Structure on the Eve of Juno's Arrival and an NEB Expansion Event

NASA Astrophysics Data System (ADS)

Fletcher, Leigh N.; Orton, Glenn S.; Greathouse, Thomas K.; Sinclair, James; Giles, Rohini; Irwin, Patrick; Rogers, John; Encrenaz, Therese

2016-04-01

We report on a continuing program of ground-based thermal-infrared imaging spectroscopy to explore variability in Jupiter's atmospheric temperatures, winds, clouds and composition in support of the NASA/Juno mission, scheduled to arrive at Jupiter in July 2016. Observations during the 2015/16 apparition, centred on opposition on March 8th 2016, will be presented from NASA's Infrared Telescope Facility (IRTF) and ESO's Very Large Telescope (VLT) as part of a world-wide campaign to characterise the Jovian atmosphere to support Juno. Thermal and chemical contrasts, combined with the visible-light record from the amateur community, show that Jupiter's North Equatorial Belt (NEB) is presently expanding northwards. The combination of thermal and visible observations will allow us to determine the environmental conditions underlying this belt/zone variability. Radiometrically calibrated spectral scan maps of Jupiter have been regularly obtained using the TEXES instrument (Texas Echelon cross Echelle Spectrograph, Lacy et al. 2002, PASP 114, p153-168) on the IRTF since 2012, and observations are planned in January and April 2016. Ten settings between 5 and 25 μm (10-20 cm-1 wide settings at spectral resolutions of 2000-10000) were selected to be sensitive to jovian temperatures (via H2, CH4 and CH3D), tropospheric phosphine and ammonia, tropospheric haze opacity and stratospheric hydrocarbons ethane and acetylene. These will be supplemented by photometric imaging from the VLT/VISIR instrument (Lagage et al., 2004, Messenger 117, p12-16) in ten narrow-band filters to determine temperatures associated with discrete phenomena (vortices, plumes, waves) at higher diffraction-limited spatial resolution. Spectra and images are inverted via the NEMESIS retrieval algorithm (Irwin et al., 2008, JSQRT 109, p1136-1150) to map temperatures at multiple altitudes (1-600 mbar), winds, aerosol opacity and gaseous composition. Our most recent observations (November 2015) revealed (i) a regular stratospheric wave pattern in stratospheric temperatures between 20 and 30°N (i.e., above the North Tropical Zone and Temperate Belt, NTropZ and NTB, respectively), possibly associated with the northward expansion of the broad North Equatorial Belt (NEB); (ii) tropospheric thermal variability along the NEB itself with correlations between aerosol variability in the 600-mbar region (sensed at 8.6 μm) and the 2-3 bar region (sensed at 5 μm). This appears to coincide with similar NEB and NTropZ wave structure observed in reflected sunlight near 2 μm, based on images from the SpeX instrument on the IRTF. Zonal mean distributions of temperature, phosphine, ammonia, aerosols and hydrocarbons will be compared to those derived by the Cassini Composite Infrared Spectrometer (CIRS) 15 years earlier. High-resolution VLT images of the Great Red Spot will be compared between 2008 and 2016 to understand the thermochemical changes associated with its recent shrinkage. All images and maps of retrieved properties will be assembled as a database (JCliD) to aid in the interpretation of Juno data during 2016-2017.

Mining The Sdss-moc Database For Main-belt Asteroid Solar Phase Behavior.

NASA Astrophysics Data System (ADS)

Truong, Thien-Tin; Hicks, M. D.

2010-10-01

The 4th Release of the Sloan Digital Sky Survey Moving Object Catalog (SDSS-MOC) contains 471569 moving object detections from 519 observing runs obtained up to March 2007. Of these, 220101 observations were linked with 104449 known small bodies, with 2150 asteroids sampled at least 10 times. It is our goal to mine this database in order to extract solar phase curve information for a large number of main-belt asteroids of different dynamical and taxonomic classes. We found that a simple linear phase curve fit allowed us to reject data contaminated by intrinsic rotational lightcurves and other effects. As expected, a running mean of solar phase coefficient is strongly correlated with orbital elements, with the inner main-belt dominated by bright S-type asteroids and transitioning to darker C and D-type asteroids with steeper solar phase slopes. We shall fit the empirical H-G model to our 2150 multi-sampled asteroids and correlate these parameters with spectral type derived from the SDSS colors and position within the asteroid belt. Our data should also allow us to constrain solar phase reddening for a variety of taxonomic classes. We shall discuss errors induced by the standard "g=0.15" assumption made in absolute magnitude determination, which may slightly affect number-size distribution models.

Numerical simulation and experiment on split tungsten carbide cylinder of high pressure apparatus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Yunfei; Li, Mingzhe, E-mail: limz@jlu.edu.cn; Wang, Bolong

2015-12-15

A new high pressure device with a split cylinder was investigated on the basis of the belt-type apparatus. The belt-type die is subjected to excessive tangential tensile stress and the tungsten carbide cylinder is easily damaged in the running process. Taking into account the operating conditions and material properties of the tungsten carbide cylinder, it is divided into 6 blocks to eliminate the tangential tensile stress. We studied two forms of the split type: radial split and tangential split. Simulation results indicate that the split cylinder has more uniform stress distribution and smaller equivalent stress compared with the belt-type cylinder.more » The inner wall of the tangential split cylinder is in the situation that compressive stress is distributed in the axial, radial, and tangential directions. It is similar to the condition of hydrostatic pressure, and it is the best condition for tungsten carbide materials. The experimental results also verify that the tangential split die can bear the highest chamber pressure. Therefore, the tangential split structure can increase the pressure bearing capacity significantly.« less

Lithofacies Associations and Depositional Environments of the Neogene Molasse succession, Pishin Belt, northwestern Pakistan

NASA Astrophysics Data System (ADS)

Kasi, A.; Kassi, A.; Friis, H.; Umar, M.

2013-12-01

The Pishin Belt is a NE-SW trending mixed flysch and molasse basin, situated at the northwestern part of Pakistan, bordered by Afghan Block of the Eurasian Plate in the west and Indian Plate in the east. Western boundary of the belt is marked by the well-known Chaman Transform Fault, whereas the Zhob Valley Thrust and Muslim Bagh-Zhob Ophiolite mark the eastern boundary. The Belt is divisible into six tectono-stratigraphic zones bounded by major thrusts. Muslim Bagh-Zhob Ophiolite is the base and Zone-I of this belt. Zone-II comprises shallow marine and flysch successions of the Eocene Nisai Formation and Oligocene Khojak Formation. The Early to Middle Miocene Dasht Murgha group comprises Zone-III, the Late Miocene-Pliocene Malthanai formation comprises Zone-IV, the Pleistocene Bostan Formation makes Zone-V, and the flat-laying Holocene deposits of the Zhob Valley comprise Zone-VI. The Neogene molasse successions of the Pishin Belt include the Dasht Murgha group, Malthanai formation and Bostan Formation; these are mostly composed of sandstone, claystone and conglomerate lithologies. Sandstones have been classified as lithic arenites and their QFL values suggest quartzolithic composition. Twelve distinct lithofacies have been recognized in the succession and thus grouped into four types of facies associations. Lithofacies include clast-supported massive gravel (Gcm), clast-supported crudely bedded gravel (Gh), cross-stratified conglomerate (Gt and Gp), trough cross-stratified sandstone (St), planar cross-stratified sandstone (Sp), ripple cross-laminated sandstone (Sr), horizontally stratified sandstone (Sh), low-angle cross-stratified sandstone (Sl), massive sandstones (Sm), massive mudstone and siltstone (Fm) and paleosol carbonate (P). The lithofacies associations include channel facies association (CHA), crevasse-splay facies association (CSA), natural-levee facies association (LVA) and floodplain facies association (FPA). The lithofacies associations suggest that the Dasht Murgha group was deposited by a sandy braided to mixed-load high-sinuosity fluvial system, the Malthanai formation by a mixed-load high-sinuosity fluvial system and Bostan Formation by gravelly braided channels of a coalescing alluvial fan system. We propose that prolonged and continued collision of the Indian Plate with the Afghan Block of the Eurasian Plate resulted in the closure of the Katawaz Remnant Ocean (the southwestern extension of the Neo-Tethys) in the Early Miocene. Uplifted orogens of the Muslim Bagh-Zhob Ophiolite and marine successions of the Nisai and Khojak formations served as the major source terrains for the Miocene through Holocene molasse succession in the south and southeast verging successive thrust-bound foreland basins at the outer most extremity of the Pishin Belt.

The Role of the Auroral Processes in the Formation of the Outer Electron Radiation Belt

NASA Astrophysics Data System (ADS)

Stepanova, M. V.; Antonova, E. E.; Pinto, V. A.; Moya, P. S.; Riazantseva, M.; Ovchinnikov, I.

2016-12-01

The role of the auroral processes in the formation of the outer electron radiation belt during storms is analyzed using the data of RBSP mission, low orbiting satellites and ground based observations. We analyze fluxes of the low energy precipitating ions using data of the Defense Meteorological Satellite Program (DMSP). The location of the auroral electrojet is obtained from the IMAGE magnetometer network, and of the electron distribution in the outer radiation belt from the RBSP mission. We take into account the latest results on the auroral oval mapping in accordance with which the most part of the auroral oval maps not to the plasma sheet. It maps into the surrounding the Earth plasma ring in which transverse currents are closed inside the magnetosphere. Such currents constitute the high latitude continuation of the ordinary ring current. The development of the ring current and its high latitude continuation generates strong distortion of the Earth's magnetic field and corresponding adiabatic variation of the relativistic electron fluxes. This adiabatic variation should be considered for the analysis of the processes of the acceleration of relativistic electrons and formation of the outer radiation belt. We also analyze the plasma pressure profiles during storms and demonstrate the formation of sharp plasma pressure peak at the equatorial boundary of the auroral oval. It is shown that the observed this peak is directly connected to the creation of the seed population of relativistic electrons. We discuss the possibility to predict the position of new radiation belt during recovery phase of the magnetic storm using data of low orbiting and ground based observations.

Intrusive rocks and plutonic belts of southeastern Alaska, U.S.A.

USGS Publications Warehouse

Brew, David A.; Morrell, Robert P.; Roddick, J.A.

1983-01-01

About 30 percent of the 175,000-km2 area of southeastern Alaska is underlain by intrusive igneous rocks. Compilation of available information on the distribution, composition, and ages of these rocks indicates the presence of six major and six minor plutonic belts. From west to east, the major belts are: the Fairweather-Baranof belt of early to mid-Tertiary granodiorite; the Muir-Chichagof belt of mid-Cretaceous tonalite and granodiorite; the Admiralty-Revillagigedo belt of porphyritic granodiorite, quartz diorite, and diorite of probable Cretaceous age; the Klukwan-Duke belt of concentrically zoned or Alaskan-type ultramafic-mafic plutons of mid-Cretaceous age within the Admiralty-Revillagigedo belt; the Coast Plutonic Complex sill belt of tonalite of unknown, but perhaps mid-Cretaceous, age; and the Coast Plutonic Complex belt I of early to mid-Tertiary granodiorite and quartz monzonite. The minor belts are distributed as follows: the Glacier Bay belt of Cretaceous and(or) Tertiary granodiorite, tonalite, and quartz diorite lies within the Fair-weather-Baranof belt; layered gabbro complexes of inferred mid-Tertiary age lie within and are probably related to the Fairweather-Baranof belt; the Chilkat-Chichagof belt of Jurassic granodiorite and tonalite lies within the Muir-Chichagof belt; the Sitkoh Bay alkaline, the Kendrick Bay pyroxenite to quartz monzonite, and the Annette and Cape Fox trondhjemite plutons, all interpreted to be of Ordovician(?) age, together form the crude southern southeastern Alaska belt within the Muir-Chichagof belt; the Kuiu-Etolin mid-Tertiary belt of volcanic and plutonic rocks extends from the Muir-Chichagof belt eastward into the Admiralty-Revillagigedo belt; and the Behm Canal belt of mid- to late Tertiary granite lies within and next to Coast Plutonic Complex belt II. In addition, scattered mafic-ultramafic bodies occur within the Fairweather-Baranof, Muir-Chichagof, and Coast Plutonic Complex belts I and II. Palinspastic reconstruction of 200 km of right-lateral movement on the Chatham Strait fault does not significantly change the pattern of the major belts but does bring parts of the minor mid-Tertiary and Ordovician(?) belts closer together. The major belts are related to the stratigraphic-tectonic terranes of Berg, Jones, and Coney (1978) as follows: the Fairweather-Baranof belt is largely in the Chugach, Wrangell (Wrangellia), and Alexander terranes; the Muir-Chichagof belt is in the Alexander and Wrangell terranes; the Admiralty-Revillagigedo belt is in the Gravina and Taku terranes; the Klukwan-Duke belt is in the Gravina, Taku, and Alexander terranes; the Coast Plutonic Complex sill belt is probably between the Taku and Tracy Arm terranes; and the Coast Plutonic Complex belts I and II are in the Tracy Arm and Stikine terranes. Significant metallic-mineral deposits are spatially related to certain of these belts, and some deposits may be genetically related. Gold, copper, and molybdenum occurrences may be related to granodiorites of the Fairweather-Baranof belt. Magmatic copper-nickel deposits occur in the layered gabbro within that belt. The Juneau gold belt, which contains gold, silver, copper, lead, and zinc occurrences, parallels and lies close to the Coast Plutonic Complex sill belt; iron deposits occur in the Klukwan-Duke belt; and porphyry molybdenum deposits occur in the Behm Canal belt. The Muir-Chichagof belt of mid-Cretaceous age and the Admiralty-Revillagigedo belt of probable Cretaceous age are currently interpreted as possible magmatic arcs associated with subduction events. In general, the other belts of intrusive rocks are spatially related to structural discontinuities, but genetic relations, if any, are not yet known. The Coast Plutonic Complex sill belt is probably related to a post-Triassic, pre-early Tertiary suture zone that nearly corresponds to the boundary between the Tracy Arm and Taku terranes. The boundary between the Admiralty-Revillagigedo and Muir-Chichagof belts coincides nearly with the Seymour Canal-Clarence Strait lineament and also is probably a major post-Triassic suture.

49 CFR 585.21 - Scope.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Scope. 585.21 Section 585.21 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Rear Inboard Lap/Shoulder Belt Phase-In...

49 CFR 585.21 - Scope.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Scope. 585.21 Section 585.21 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Rear Inboard Lap/Shoulder Belt Phase-In...

49 CFR 585.21 - Scope.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Scope. 585.21 Section 585.21 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Rear Inboard Lap/Shoulder Belt Phase-In...

49 CFR 585.21 - Scope.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Scope. 585.21 Section 585.21 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Rear Inboard Lap/Shoulder Belt Phase-In...

49 CFR 585.21 - Scope.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Scope. 585.21 Section 585.21 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Rear Inboard Lap/Shoulder Belt Phase-In...

The Scattered Kuiper Belt Objects

NASA Astrophysics Data System (ADS)

Trujillo, C. A.; Jewitt, D. C.; Luu, J. X.

1999-09-01

We describe a continuing survey of the Kuiper Belt conducted at the 3.6-m Canada France Hawaii Telescope on Mauna Kea, Hawaii. The survey employs a 12288 x 8192 pixel CCD mosaic to image the sky to red magnitude 24. All detected objects are targeted for systematic follow-up observations, allowing us to determine their orbital characteristics. Three new members of the rare Scattered Kuiper Belt Object class have been identified, bringing the known population of such objects to four. The SKBOs are thought to have been scattered outward by Neptune, and are a potential source of the short-period comets. Using a Maximum Likelihood method, we place observational constraints on the total number and mass of the SKBOs.

Geology of the Lachesis Tessera Quadrangle (V-18), Venus

NASA Technical Reports Server (NTRS)

McGowan, Eileen M.; McGill, George G.

2010-01-01

The Lachesis Tessera Quadrangle (V-18) lies between 25deg and 50deg north, 300deg and 330deg east. Most of the quadrangle consists of "regional plains" (1) of Sedna and Guinevere Planitiae. A first draft of the geology has been completed, and the tentative number of mapped units by terrain type is: tesserae - 2; plains - 4; ridge belts - 1; fracture belts - 1 (plus embayed fragments of possible additional belts); coronae - 5; central volcanoes - 2; shield flows - 2; paterae - 1; impact craters - 13; undifferentiated flows - 1; bright materials - 1.

Land-use and land-cover change in three corn belt ecoregions: Similarities and differences

USGS Publications Warehouse

Auch, Roger F.; Laingen, Chris R.; Drummond, Mark A.; Sayler, Kristi L.; Reker, Ryan R.; Bouchard, Michelle A.; Danielson, Jeffrey J.

2013-01-01

Land use categorical changes, though not as numerous as one might suspect, vary by type within the three designated ecozones of the Corn Belt with the westernmost zone showing the most temporary change vis-a-vis the more permanent changes taking place in the eastern and central zones.

Ammonia in Jupiter’s troposphere from high-resolution 5-micron spectroscopy

NASA Astrophysics Data System (ADS)

Giles, Rohini; Fletcher, Leigh; Irwin, Patrick; Orton, Glenn S.; Sinclair, James Andrew

2017-10-01

Jupiter's tropospheric ammonia (NH3) abundance is studied using spatially-resolved 5-micron observations from CRIRES, a high-resolution spectrometer at the Very Large Telescope in 2012. The high resolving power (R=96,000) allows the line shapes of three NH3 absorption features to be resolved. These three absorption features have different line strengths and probe slightly different pressure levels, and they can therefore be used to constrain the vertical profile of NH3 in the 1-4 bar pressure range. The instrument slit was aligned north-south along Jupiter's central meridian, allowing us to search for latitudinal variability. The CRIRES observations do not provide evidence for belt-zone variability in NH3, as any spectral differences can be accounted for by the large differences in cloud opacity between the cloudy zones and the cloud-free belts. However, we do find evidence for localised small-scale variability in NH3. Specifically, we detect a strong enhancement in NH3 on the southern edge of the North Equatorial Belt (4-6°N). This is consistent with the ‘ammonia plumes’ observed by Fletcher et al. (2016, doi:10.1016/j.icarus.2016.06.008) at the 500-mbar level using 10-micron observations from TEXES/IRTF, as well as with measurements by Juno’s Microwave Radiometer (Li et al. 2017, doi:10.1002/2017GL073159).

Simulating the heterogeneity in braided channel belt deposits: 2. Examples of results and comparison to natural deposits

NASA Astrophysics Data System (ADS)

Guin, Arijit; Ramanathan, Ramya; Ritzi, Robert W.; Dominic, David F.; Lunt, Ian A.; Scheibe, Timothy D.; Freedman, Vicky L.

2010-04-01

In part 1 of this paper (Ramanathan et al., 2010b) we presented a methodology and a code for modeling the hierarchical sedimentary architecture in braided channel belt deposits. Here in part 2, the code was used to create a digital model of this architecture and the corresponding spatial distribution of permeability. The simulated architecture was compared to the real stratal architecture observed in an abandoned channel belt. The comparisons included assessments of similarity which were both qualitative and quantitative. The qualitative comparisons show that the geometries of unit types within the synthetic deposits are generally consistent with field observations. The unit types in the synthetic deposits would generally be recognized as representing their counterparts in nature, including cross stratasets, lobate and scroll bar deposits, and channel fills. Furthermore, the synthetic deposits have a hierarchical spatial relationship among these units consistent with observations from field exposures and geophysical images. In quantitative comparisons the proportions and the length, width, and height of unit types at different scales, across all levels of the stratal hierarchy, compare well between the synthetic and the natural deposits. A number of important attributes of the synthetic channel belt deposits are shown to be influenced by more than one level within the hierarchy of stratal architecture. First, the high-permeability open-framework gravels connected across all levels and thus formed preferential flow pathways; open-framework gravels are known to form preferential flow pathways in natural channel belt deposits. The nature of a connected cluster changed across different levels of the stratal hierarchy, and as a result of the geologic structure, the connectivity occurs at proportions of open-framework gravels below the theoretical percolation threshold for random infinite media. Second, when the channel belt model was populated with permeability distributions by lowest-level unit type, the composite permeability semivariogram contained structures that were identifiable at more than one scale, and each of these structures could be directly linked to unit types of different scales existing at different levels within the hierarchy of strata. These collective results are encouraging with respect to our goal that this model be relevant for testing ideas in future research on flow and transport in aquifers and reservoirs with multiscale heterogeneity.

Triple junction orogeny: tectonic evolution of the Pan-African Northern Damara Belt, Namibia

NASA Astrophysics Data System (ADS)

Lehmann, Jérémie; Saalmann, Kerstin; Naydenov, Kalin V.; Milani, Lorenzo; Charlesworth, Eugene G.; Kinnaird, Judith A.; Frei, Dirk; Kramers, Jan D.; Zwingmann, Horst

2014-05-01

Trench-trench-trench triple junctions are generally geometrically and kinematically unstable and therefore can result at the latest stages in complicated collisional orogenic belts. In such geodynamic sites, mechanism and timescale of deformations that accommodate convergence and final assembly of the three colliding continental plates are poorly studied. In western Namibia, Pan-African convergence of three cratonic blocks led to pene-contemporaneous closure of two highly oblique oceanic domains and formation of the triple junction Damara Orogen where the NE-striking Damara Belt abuts to the west against the NNW-striking Kaoko-Gariep Belt. Detailed description of structures and microstructures associated with remote sensing analysis, and dating of individual deformation events by means of K-Ar, Ar-Ar (micas) and U-Pb (zircon) isotopic studies from the Northern Damara Belt provide robust constraints on the tectonic evolution of this palaeo-triple junction orogeny. There, passive margin sequences of the Neoproterozoic ocean were polydeformed and polymetamorphosed to the biotite zone of the greenschist facies to up to granulite facies and anatexis towards the southern migmatitic core of the Central Damara Belt. Subtle relict structures and fold pattern analyses reveal the existence of an early D1 N-S shortening event, tentatively dated between ~635 Ma and ~580 Ma using published data. D1 structures were almost obliterated by pervasive and major D2 E-W coaxial shortening, related to the closure of the Kaoko-Gariep oceanic domain and subsequent formation of the NNW-striking Kaoko-Gariep Belt to the west of the study area. Early, km-scale D1 E-W trending steep folds were refolded during this D2 event, producing either Type I or Type II fold interference patterns visible from space. The D2 E-W convergence could have lasted until ~533 Ma based on published and new U-Pb ages. The final D3 NW-SE convergence in the northernmost Damara Belt produced a NE-striking deformation front in weak metasedimentary rocks during SE-directed indentation of a rigid Paleoproterozoic basement. In the central and southern parts of the Northern Damara Belt, D3 is mostly expressed by km-scale local Type I fold interference patterns formed by the refolding of D2 upright synclines as well as bending around a steep axis of the D2 refolded folds and steep S2 multilayer. In the western part however, where the two orthogonal trends of the Damara and Kaoko-Gariep Belts meet, D3 is described in literature as sinistral shearing along reactivated steep S2 planes that is associated with steep-hinge folds with steep NE-striking axial planes. Our new ages indicate that D3 lasted from ~513 Ma to ~460 Ma throughout the entire Northern Damara Belt. These results document for the first time a regional-scale early Pan-African N-S shortening event of uncertain geotectonic significance. They furthermore indicate that two competing orthogonal collisional systems have contributed in resolving instabilities at the triple orogenic junction over a period in the order of ~100 m.y. and could therefore account for the assembly of the three cratons. The E-W convergence was preponderant in strength and pre-dates the NW-SE one, the latter being associated with localized sinistral shearing along the Kaoko Belt interface in the westernmost Northern Damara Belt.

Evolution of the inner asteroid belt: Paradigms and paradoxes from spectral studies

NASA Technical Reports Server (NTRS)

Gaffey, Michael J.

1987-01-01

Recent years have witnessed a significant increase in the sophistication of asteroidal surface material characterizations derived from spectral data. An extensive data base of moderate to high spectral resolution, visible and near-infrared asteroid spectra is now available. Interpretive methodologies and calibrations were developed to determine phase abundance and composition in olivine-pyroxene assemblages and to estimate NiFe metal abundance from such spectra. A modified version of the asteroid classifications system more closely parallels the mineralogic variations of the major inner belt asteroid types. These improvements permit several general conclusions to be drawn concerning the nature of inner belt objects; their history, and that of the inner solar system; and the relationship between the asteroids and meteorites. Essentially all large belt asteroids have or are fragments of parent bodies which have undergone strong post-accretionary heating, varying degrees of melting and magmatic differentiation, and subsequent collisional disruption. These asteroids show a systematic, but not yet well characterized, mineralogic variation with semi-major axis. This suggests that the S-type asteroid families represent relatively recent collisions onto the cores of previously disrupted parent bodies.

Petrography and geochemistry of Mesoarchaean komatiites from the eastern Iron Ore belt, Singhbhum craton, India, and its similarity with 'Barberton type komatiite'

NASA Astrophysics Data System (ADS)

Chaudhuri, Trisrota; Mazumder, Rajat; Arima, Makoto

2015-01-01

The Mesoarchaean supracrustals of the Gorumahishani-Badampahar belt, eastern India record sedimentation-volcanism like most other contemporary greenstone belts over the world. The current study reports unambiguous komatiitic rocks from Tua-Dungri hill, Gorumahishani-Badampahar belt, Jharkhand and presents a petrological and geochemical inventory of these very interesting rocks. The Tua-Dungri komatiites are characterised by a well distinguishable cumulate, platy and random spinifex zone. These Tua-Dungri komatiites are rich in SiO2 (47-50 wt%) like Barberton type komatiite or modern day boninite. Their Al depleted nature (Al2O3 = 1.36-2.95 wt%) with very low Al2O3/TiO2 (3.4-6.5) and high CaO/Al2O3 (2-3), high LREE/HREE ratios show further resemblance with the Barberton komatiite. The Tua Dungri komatiite data along with published geochemical, sedimentological and stratigraphic data from the Iron Ore Group of rocks suggest mantle plume activity during the Mesoarchaean on the Singhbhum craton.

The scattered disk and hot belt, two sides of the same coin?

NASA Astrophysics Data System (ADS)

Kavelaars, J. J.; Petit, J.-M.; Gladman, B.; Jone, R. L.; Parker, J.; Taylor, M.

2011-10-01

The Canada-France Ecliptic Plane Survey (CFEPS) and High Latitude Extension (HILat)[] obtained characterized observations of nearly 800 sq.deg. of sky to depths in the range ˜23.5 - 24.4 AB mag, providing a database of nearly 200 trans-neptunian objects (TNOs) with high-precision dynamical classification and known discovery efficiency. Using this database, we find that the high-inclination component of the inner (a < 40 AU) main (a=40-47 AU) classical and outer (a > 47 AU) belt are well represented by a continuous density distribution coming from a constrained q range (35 < q < 40). This range of peri-center is similar to the range which some researchers associated with the scattered disk. In our modeling of the orbital phase space of the Kuiper belt we find that there is no need for two distinct components (ie. both a scattered disk and a hot component to the classical belt). The historical separation of the high-inclination component of the Kuiper belt into these two distinct structures appears to have been mis-guided.

[Analysis of vegetation spatial and temporal variations in Qinghai Province based on remote sensing].

PubMed

Wang, Li-wen; Wei, Ya-xing; Niu, Zheng

2008-06-01

1 km MODIS NDVI time series data combining with decision tree classification, supervised classification and unsupervised classification was used to classify land cover type of Qinghai Province into 14 classes. In our classification system, sparse grassland and sparse shrub were emphasized, and their spatial distribution locations were labeled. From digital elevation model (DEM) of Qinghai Province, five elevation belts were achieved, and we utilized geographic information system (GIS) software to analyze vegetation cover variation on different elevation belts. Our research result shows that vegetation cover in Qinghai Province has been improved in recent five years. Vegetation cover area increases from 370047 km2 in 2001 to 374576 km2 in 2006, and vegetation cover rate increases by 0.63%. Among five grade elevation belts, vegetation cover ratio of high mountain belt is the highest (67.92%). The area of middle density grassland in high mountain belt is the largest, of which area is 94 003 km2. Increased area of dense grassland in high mountain belt is the greatest (1280 km2). During five years, the biggest variation is the conversion from sparse grassland to middle density grassland in high mountain belt, of which area is 15931 km2.

Shear zones of the Verkhoyansk fold-and-thrust belt, Northeast Russia

NASA Astrophysics Data System (ADS)

Fridovsky, Valery; Polufuntikova, Lena

2017-04-01

The Verkhoyansk fold-and-thrust belt is situated on the submerged eastern margin of the North Asian craton, and is largely composed of the Ediacaran - Middle Paleozoic carbonate and the Upper Paleozoic-Mesozoic terrigenous rocks. The Upper Carboniferous - Jurassic sediments constitute the Verkhoyansk terrigenous complex containing economically viable orogenic gold deposits. The structure of the belt is mainly controlled by thrusts and associated diagonal strike slips. Linear concentric folds are common all over the area of the belt. Shear zones with associated similar folds are confined to long narrow areas. Shear zones were formed during the early stages of the Oxfordian-Kimmeridgian collisional and accretionary events prior to the emplacement of large orogenic granitoid plutons. The main ore-controlling structures are shear zones associated with slaty cleavage, shear folds, mullion- and boudinage-structures, and transposition features. The shear zones are listric-type, and represent branches of a detachment structure, which is assumed to be present at the base of the Verkhoyansk fold-and-thrust belt. A vertical zonation of shear zones is correlated with the distance to the detachment. Changes in the dip angle of the shear zones (as indicated mainly by cleavage), structural paragenesis, the degree of microdeformation of the host rocks, and the type of ore-controlling structures can be clearly observed in the direction away from the detachment. Structural zoning is evidenced, among other things, by changing morphologic types of microstructures and by strain-indicators of the degree of rock metamorphism. Four morphologic types of microstructures are identified. The first platy-shear type is characterized by aggregate cleavage and the coefficient of deformation (Cd) of single grains from 1.0 to 2.0. Irregular angular fragments of variously oriented grains can be observed in thin sections. The second shear-cataclastic morphologic type (Cd from 2.0 to 3.0) exhibits combined aggregate and intergranular cleavage. The third cataclastic-segregation morphologic type (Cd from 3.0 to 4.5) is distinguished by a wide distribution of lentelliptical grains of rock-forming minerals in a finely-crystalline matrix and by intergranular cleavage. The rocks of the fourth segregation-striate morphologic type (Cd >5.0) contain lenticular segregations of quartz and feldspar in an intensely linearized mylonite groundmass.

A multi-scale modelling procedure to quantify hydrological impacts of upland land management

NASA Astrophysics Data System (ADS)

Wheater, H. S.; Jackson, B.; Bulygina, N.; Ballard, C.; McIntyre, N.; Marshall, M.; Frogbrook, Z.; Solloway, I.; Reynolds, B.

2008-12-01

Recent UK floods have focused attention on the effects of agricultural intensification on flood risk. However, quantification of these effects raises important methodological issues. Catchment-scale data have proved inadequate to support analysis of impacts of land management change, due to climate variability, uncertainty in input and output data, spatial heterogeneity in land use and lack of data to quantify historical changes in management practices. Manipulation experiments to quantify the impacts of land management change have necessarily been limited and small scale, and in the UK mainly focused on the lowlands and arable agriculture. There is a need to develop methods to extrapolate from small scale observations to predict catchment-scale response, and to quantify impacts for upland areas. With assistance from a cooperative of Welsh farmers, a multi-scale experimental programme has been established at Pontbren, in mid-Wales, an area of intensive sheep production. The data have been used to support development of a multi-scale modelling methodology to assess impacts of agricultural intensification and the potential for mitigation of flood risk through land use management. Data are available from replicated experimental plots under different land management treatments, from instrumented field and hillslope sites, including tree shelter belts, and from first and second order catchments. Measurements include climate variables, soil water states and hydraulic properties at multiple depths and locations, tree interception, overland flow and drainflow, groundwater levels, and streamflow from multiple locations. Fine resolution physics-based models have been developed to represent soil and runoff processes, conditioned using experimental data. The detailed models are used to calibrate simpler 'meta- models' to represent individual hydrological elements, which are then combined in a semi-distributed catchment-scale model. The methodology is illustrated using field and catchment-scale simulations to demonstrate the the response of improved and unimproved grassland, and the potential effects of land management interventions, including farm ponds, tree shelter belts and buffer strips. It is concluded that the methodology developed has the potential to represent and quantify catchment-scale effects of upland management; continuing research is extending the work to a wider range of upland environments and land use types, with the aim of providing generic simulation tools that can be used to provide strategic policy guidance.

Is seat belt use associated with fewer days of lost work after motor vehicle collisions?

PubMed

Metzger, Jesse; McGwin, Gerald; MacLennan, Paul A; Rue, Loring W

2004-05-01

Seat belt use has consistently been shown to reduce motor vehicle collision (MVC)-related morbidity and mortality. The goal of this study is to determine whether seat belt use is associated with fewer lost workdays among occupants involved in MVCs. The 1995 to 2000 National Automotive Sampling System (NASS) data files were used. The NASS is a national probability sample of passenger vehicles involved in police-reported tow-away MVCs. Occupants' lost workdays, which are routinely collected as part of an NASS investigation, were compared according to seat belt use. During 1995 to 2000 in the United States, surviving occupants involved in MVCs lost a total of 42.1 million workdays (approximately 7.0 million lost workdays per year; 2.4 lost workdays per person). The overall difference in lost workdays between the belted and unbelted occupants was 1.59 days (1.99 days vs. 3.58 days, respectively; p < 0.001). After adjusting for potentially confounding factors, belted occupants had 1.52 fewer lost workdays compared with unbelted occupants (p < 0.001). This translates to an estimated 7.3 million lost workdays and an associated $566 million in lost wages and $1.25 billion in work-place costs attributable to lack of seat belt use in the United States during 1995 to 2000. Lost workdays attributable to MVCs in the United States have sizable financial implications. Furthermore, seat belt use significantly reduces lost time at work and is associated with a significant cost savings. The national impact of unbelted driving on work productivity is dramatic, and further efforts to promote appropriate seat belt use should continue as part of the national safety agenda.

The relationship between the plasmapause and outer belt electrons

DOE PAGES

Goldstein, J.; Baker, D. N.; Blake, J. B.; ...

2016-09-01

Here, we quantify the spatial relationship between the plasmapause and outer belt electrons for a 5 day period, 15–20 January 2013, by comparing locations of relativistic electron flux peaks to the plasmapause. A peak-finding algorithm is applied to 1.8–7.7 MeV relativistic electron flux data. A plasmapause gradient finder is applied to wave-derived electron number densities >10 cm –3. We identify two outer belts. Outer belt 1 is a stable zone of >3 MeV electrons located 1–2 R E inside the plasmapause. Outer belt 2 is a dynamic zone of <3 MeV electrons within 0.5 R E of the moving plasmapause.more » Electron fluxes earthward of each belt's peak are anticorrelated with cold plasma density. Belt 1 decayed on hiss timescales prior to a disturbance on 17 January and suffered only a modest dropout, perhaps owing to shielding by the plasmasphere. Afterward, the partially depleted belt 1 continued to decay at the initial rate. Belt 2 was emptied out by strong disturbance-time losses but restored within 24 h. For global context we use a plasmapause test particle simulation and derive a new plasmaspheric index F p, the fraction of a circular drift orbit inside the plasmapause. We find that the locally measured plasmapause is (for this event) a good proxy for the globally integrated opportunity for losses in cold plasma. Our analysis of the 15–20 January 2013 time interval confirms that high-energy electron storage rings can persist for weeks or even months if prolonged quiet conditions prevail. This case study must be followed up by more general study (not limited to a 5 day period).« less

The relationship between the plasmapause and outer belt electrons

NASA Astrophysics Data System (ADS)

Goldstein, J.; Baker, D. N.; Blake, J. B.; De Pascuale, S.; Funsten, H. O.; Jaynes, A. N.; Jahn, J.-M.; Kletzing, C. A.; Kurth, W. S.; Li, W.; Reeves, G. D.; Spence, H. E.

2016-09-01

We quantify the spatial relationship between the plasmapause and outer belt electrons for a 5 day period, 15-20 January 2013, by comparing locations of relativistic electron flux peaks to the plasmapause. A peak-finding algorithm is applied to 1.8-7.7 MeV relativistic electron flux data. A plasmapause gradient finder is applied to wave-derived electron number densities >10 cm-3. We identify two outer belts. Outer belt 1 is a stable zone of >3 MeV electrons located 1-2 RE inside the plasmapause. Outer belt 2 is a dynamic zone of <3 MeV electrons within 0.5 RE of the moving plasmapause. Electron fluxes earthward of each belt's peak are anticorrelated with cold plasma density. Belt 1 decayed on hiss timescales prior to a disturbance on 17 January and suffered only a modest dropout, perhaps owing to shielding by the plasmasphere. Afterward, the partially depleted belt 1 continued to decay at the initial rate. Belt 2 was emptied out by strong disturbance-time losses but restored within 24 h. For global context we use a plasmapause test particle simulation and derive a new plasmaspheric index Fp, the fraction of a circular drift orbit inside the plasmapause. We find that the locally measured plasmapause is (for this event) a good proxy for the globally integrated opportunity for losses in cold plasma. Our analysis of the 15-20 January 2013 time interval confirms that high-energy electron storage rings can persist for weeks or even months if prolonged quiet conditions prevail. This case study must be followed up by more general study (not limited to a 5 day period).

Reconstructed Oceanic Sedimentary Sequence in the Cape Three Points Area, Southern Axim-Konongo (Ashanti) Greenstone Belt in the Paleoproterozoic Birimian of Ghana.

NASA Astrophysics Data System (ADS)

Kiyokawa, S.; Ito, T.; Frank, N. K.; George, T. M.

2014-12-01

The Birimian greenstone belt likely formed through collision between the West African and Congo Cratons ~2.2 Ga. Accreted greenstone belts that formed through collision especially during the Palaeoproterozoic are usually not only good targets for preservation of oceanic sedimentary sequences but also greatly help understand the nature of the Paleoproterozoic deeper oceanic environments. In this study, we focused on the coastal area around Cape Three Points at the southernmost part of the Axim-Konongo (Ashanti) greenstone belt in Ghana where excellently preserved Paleoprotrozoic deeper oceanic sedimentary sequences extensively outcrop. The Birimian greenstone belt in both the Birimian rock (partly Sefwi Group) and Ashanti belts are separated from the Tarkwaian Group which is a paleoplacer deposit (Perrouty et al., 2012). The Birimian rock was identified as volcanic rich greenstone belt; Kumasi Group is foreland basin with shale and sandstone, quartzite and turbidite derived from 2.1 Ga granite in the Birimian; Tarkwaian Group is composed of coarse detrital sedimentary rocks deposited along a strike-slip fault in the Birimian. In the eastern part of the Cape Three Point area, over 4km long of volcanic-sedimentary sequence outcrops and is affected by greenschist facies metamorphism. Four demarcated zones along the coast as Kutike, Atwepo, Kwtakor and Akodaa zones. The boundaries of each zone were not observed, but each zone displays a well preserved and continuous sedimentary sequence. Structurally, this region is west vergent structure and younging direction to the East. Kutike zone exhibits synform structure with S0 younging direction. Provisional stratigraphic columns in all the zones total about 500m thick. Kutike, Atwepo zones (> 200m thick) have coarsening upward characteristics from black shale to bedded volcanic sandstone. Kwtakor zone (> 150m) is the thickest volcaniclastic sequence and has fining upward sections. Akodaa zone (> 150m) consists of finer bed of volcaniclastics with black shales and has fining upward character. This continuous sequence indicate distal portion of submarine volcaniclastic section in an oceanic island arc between the West African and Congo Cratons.

The Peculiarities in O-Type Galaxy Clusters

NASA Astrophysics Data System (ADS)

Panko, E. A.; Emelyanov, S. I.

We present the results of analysis of 2D distribution of galaxies in galaxy cluster fields. The Catalogue of Galaxy Clusters and Groups PF (Panko & Flin) was used as input observational data set. We selected open rich PF galaxy clusters, containing 100 and more galaxies for our study. According to Panko classification scheme open galaxy clusters (O-type) have no concentration to the cluster center. The data set contains both pure O-type clusters and O-type clusters with overdence belts, namely OL and OF types. According to Rood & Sastry and Struble & Rood ideas, the open galaxy clusters are the beginning stage of cluster evolution. We found in the O-type clusters some types of statistically significant regular peculiarities, such as two crossed belts or curved strip. We suppose founded features connected with galaxy clusters evolution and the distribution of DM inside the clusters.

The continued burden of spine fractures after motor vehicle crashes.

PubMed

Wang, Marjorie C; Pintar, Frank; Yoganandan, Narayan; Maiman, Dennis J

2009-02-01

Spine fractures are a significant cause of morbidity and mortality after motor vehicle crashes (MVCs). Public health interventions, such as the National Highway Traffic Safety Administration's Federal Motor Vehicle Safety Standards, have led to an increase in automobiles with air bags and the increased use of seat belts to lessen injuries sustained from MVCs. The purpose of this study was to evaluate secular trends in the occurrence of spine fractures associated with MVCs and evaluate the association between air bag and seat belt use with spine fractures. Using the Crash Outcome Data Evaluation System, a database of the police reports of all MVCs in Wisconsin linked to hospital records, the authors studied the occurrence of spine fractures and seat belt and air bag use from 1994 to 2002. Demographic information and crash characteristics were obtained from the police reports. Injury characteristics were determined using International Classification of Disease, 9th Revision, Clinical Modification (ICD-9-CM) hospital discharge codes. From 1994 to 2002, there were 29,860 hospital admissions associated with automobile or truck crashes. There were 20,276 drivers or front-seat passengers 16 years of age and older who were not missing ICD-9-CM discharge codes, seat belt or air bag data, and who had not been ejected from the vehicle. Of these, 2530 (12.5%) sustained a spine fracture. The occurrence of spine fractures increased over the study period, and the use of a seat belt plus air bag, and of air bags alone also increased during this period. However, the occurrence of severe spine fractures (Abbreviated Injury Scale Score > or =3) did not significantly increase over the study period. The use of both seat belt and air bag was associated with decreased odds of a spine fracture. Use of an air bag alone was associated with increased odds of a severe thoracic, but not cervical spine fracture. Among drivers and front-seat passengers admitted to the hospital after MVCs, the occurrence of spine fractures increased from 1994 to 2002 despite concomitant increases in seat belt and air bag use. However, the occurrence of severe spine fractures did not increase over the study period. The use of both seat belt and air bag is protective against spine fractures. Although the overall increased occurrence of spine fractures may appear contrary to the increased use of seat belts and air bags in general, it is possible that improved imaging technology may be associated with an increase in the diagnosis of relatively minor fractures. However, given the significant protective effects of both seat belt and air bag use against spine fractures, resources should continue to be dedicated toward increasing their use to mitigate the effects of MVCs.

Comparison between the effect of lumbopelvic belt and home based pelvic stabilizing exercise on pregnant women with pelvic girdle pain; a randomized controlled trial.

PubMed

Kordi, Ramin; Abolhasani, Maryam; Rostami, Mohsen; Hantoushzadeh, Sedigheh; Mansournia, Mohammad Ali; Vasheghani-Farahani, Farzaneh

2013-01-01

Pelvic girdle pain is a common complaint of pregnant women. There are limited data on comparison between the effectiveness of stabilizing exercises and lumbopelvic belt on the treatment of these patients. The objective of this study was to compare the effect of lumbopelvic belt plus information, home based pelvic girdle stabilizing exercises plus information and information alone on pain intensity, functional status and quality of life of pregnant women with pelvic girdle pain. In this randomized clinical trial pregnant women with pelvic girdle pain (n=105) were randomly allocated to three groups; Control group (n=35) that received general information, exercise group (n=31) that in addition to general information were asked to perform specific pelvic stabilizing exercises at home and belt group (n=31) that received non-rigid lumbopelvic belt and the information. The primary outcome variables were pain intensity and functional status of the participants which were measured using visual analogue scale and Oswestry Disability Index (ODI) respectively. Quality of life of participants was measured using WHOQOL-BREF questionnaire. All measurements were performed at baseline, 3 and 6 weeks after the study conduction. The pain intensity of patients in belt group in comparison to other groups was decreased significantly at both 3 and 6 weeks follow-ups. The mean score of ODI of patients in belt group was also improved more than exercise and control groups significantly. On base of our results, it can be found that in short term lumbopelvic belt and information in treatment of pregnant women with pelvic girdle pain is superior to exercise plus information or information alone.

Uncoupled vs. coupled thrust belt-foreland deformation: a model for northern Patagonia inferred from U-Th/He and apatite fission track dating

NASA Astrophysics Data System (ADS)

Savignano, Elisa; Mazzoli, Stefano; Zattin, Massimiliano; Gautheron, Cécile; Franchini, Marta

2017-04-01

The study of the Cretaceous - Cenozoic evolution of the Patagonian Andes represents a great opportunity to investigate the effects of coupling between deep lithospheric processes and near-surface deformation. Low-temperature thermochronological systems are ideally suited for detecting events involving rocks in the uppermost part of the crust because they record time and rates of cooling related to exhumation of the top few kilometers of the crust. The Patagonia region, although characterized by a general continuity of the Andean orogen along its strike, shows an appreciable internal tectonic segmentation (marked by a variable position of the magmatic arc and of the deformation front in the retroarc area) at various latitudes. This complex structural architecture has been interpreted as the result of different processes acting since the Late Cretaceous. The present-day configuration of the southern Andes is interpreted to have been controlled by alternating stages of flat- and steep-slab subduction, which produced shortening and upper plate extension episodes,, respectively. Furthermore, the deformation in this whole retroarc sector varied not only in time (i.e. with major 'cycles' of mountain building and orogenic collapse), but also in space, due to the variable transmission of horizontal compressive stress away from the orogen, that produced an irregular unroofing pattern. In this study, we have integrated field structural observations with new apatite (U-Th)/He data (AHe) and apatite fission-track (AFT) ages in the north Patagonia region (at latitudes between 40° and 44°S) in order to analyse and compare the exhumation patterns from the frontal part of the orogen and from the adjacent foreland sector, as well as to gain new insights into the timing and modes of coupling vs. uncoupling of the deformation between the northern Patagonian fold and thrust belt and its foreland. The obtained data indicate a markedly different unroofing pattern between the 'broken foreland' area (characterized by Late Cretaceous to Paleogene exhumation) and the adjacent Andean sector to the west, which is dominated by Miocene-Pliocene exhumation. Our study supports the idea that the configuration of the slab (flat vs. steep) during subduction controls the coupling vs. uncoupling of the deformation between the thrust belt and the foreland. Along the studied transect, late Miocene to Pliocene AHe ages from the frontal part of the northern Patagonian Andes correlate well with a rapid recent shortening and exhumation stage that took place in the thrust belt during steep-slab subduction and rollback. On the other hand, AHe ages obtained for the 'broken foreland' unravelled exhumation at near-surface conditions during Late Cretaceous to Paleogene times, when a prolonged phase of flat-slab subduction favoured the coupling between the thrust belt and the foreland area and associated widespread shortening able to reactivate inherited rift-related structures.

Formation of an Archean tectonic mélange in the Schreiber-Hemlo greenstone belt, Superior Province, Canada: Implications for Archean subduction-accretion process

NASA Astrophysics Data System (ADS)

Polat, Ali; Kerrich, Robert

1999-10-01

The late Archean (circa 2750-2670 Ma) Schreiber-Hemlo greenstone belt, Superior Province, Canada, is composed of tectonically juxtaposed fragments of oceanic plateaus (circa 2750-2700 Ma), oceanic island arcs (circa 2720-2695 Ma), and siliciclastic trench turbidites (circa 2705-2697 Ma). Following juxtaposition, these lithotectonic assemblages were collectively intruded by synkinematic tonalite-trondhjemite-granodiorite (TTG) plutons (circa 2720-2690 Ma) and ultramafic to felsic dikes and sills (circa 2690-2680 Ma), with subduction zone geochemical signatures. Overprinting relations between different sequences of structures suggest that the belt underwent at least three phases of deformation. During D1 (circa 2695-2685 Ma), oceanic plateau basalts and associated komatiites, arc-derived trench turbidites, and oceanic island arc sequences were all tectonically juxtaposed as they were incorporated into an accretionary complex. Fragmentation of these sequences resulted in broken formations and a tectonic mélange in the Schreiber assemblage of the belt. D2 (circa 2685-2680 Ma) is consistent with an intra-arc, right-lateral transpressional deformation. Fragmentation and mixing of D2 synkinematic dikes and sills suggest that mélange formation continued during D2. The D1 to D2 transition is interpreted in terms of a trenchward migration of the magmatic arc axis due to continued accretion and underplating. The D2 intra-arc strike-slip faults may have provided conduits for uprising melts from the descending slab, and they may have induced decompressional partial melting in the subarc mantle wedge, to yield synkinematic ultramafic to felsic intrusions. A similar close relationship between orogen-parallel strike-slip faulting and magmatism has recently been recognized in several Phanerozoic transpressional orogenic belts, suggesting that as in Phanerozoic counterparts, orogen-parallel strike-slip faulting in the Schreiber-Hemlo greenstone belt played an important role in magma emplacement.

Characterization of fluid inclusions from mineralized pegmatites of the Damara Belt, Namibia: insight into late-stage fluid evolution and implications for mineralization

NASA Astrophysics Data System (ADS)

Ashworth, Luisa; Kinnaird, Judith Ann; Nex, Paul Andrew Martin; Erasmus, Rudolph Marthinus; Przybyłowicz, Wojciech Józef

2018-05-01

Mineralized NYF and LCT pegmatites occur throughout the northeast-trending Neoproterozoic Damara Belt, Namibia. Mineralization in the pegmatites varies geographically, from the northeast, where they are enriched in Li-Be, to the southwest, where they also contain notable Sn and U. Similar fluid inclusion populations occur throughout the pegmatites, regardless of their respective metal enrichments, and primary fluid inclusion textures were destroyed by continued fluid activity. Pseudosecondary to secondary inclusions are aqueo-carbonic, carbonic, and aqueous in composition, and have been divided into five types. The earliest populations are saline (>26.3 eq. wt.% NaCl), homogenizing at temperatures in excess of 300 °C. Their carbonic phase is composed of CO2, with minor CH4, and micro-elemental mapping indicates they contain trace metals, including Ca, Fe, Zn, Cu, and K. Type 3 inclusions formed later, homogenize at 325 °C, and are less saline, with a carbonic phase composed of CO2. Type 4 carbonic inclusions are composed of pure CO2, and represent the latest stages of fluid evolution, while Type 5 aqueous inclusions are believed to be unrelated to the crystallization of the pegmatites, and rather the result of regional Cretaceous magmatism, or the ingress of meteoric water. The similarities in fluid inclusion populations observed in the pegmatites suggest that differences in mineralization were driven by magma composition rather than fluid activity alone, however saline fluids facilitated the enrichment and deposition of metals during the late stages of crystallization. Furthermore, the similarities between fluid inclusion populations in different pegmatites suggests they share a similar fluid evolution.

Variability of Jupiter's Five-Micron Hot Spot Inventory

NASA Technical Reports Server (NTRS)

Yanamandra-Fisher, Padma A.; Orton, G. S.; Wakefield, L.; Rogers, J. H.; Simon-Miller, A. A.; Boydstun, K.

2012-01-01

Global upheavals on Jupiter involve changes in the albedo of entire axisymmetric regions, lasting several years, with the last two occurring in 1989 and 2006. Against this backdrop of planetary-scale changes, discrete features such as the Great Red Spot (GRS), and other vortices exhibit changes on shorter spatial- and time-scales. We track the variability of the discrete equatorial 5-micron hot spots, semi-evenly spaced in longitude and confined to a narrow latitude band centered at 6.5degN (southern edge of the North Equatorial Belt, NEB), abundant in Voyager images. Tantalizingly similar patterns were observed in the visible (bright plumes and blue-gray regions), where reflectivity in the red is anti-correlated with 5-microns thermal radiance. Ortiz et al. (1998, GRL, 103) characterized the latitude and drift rates of the hot spots, including the descent of the Galileo probe at the southern edge of a 5-micron hot spot, as the superposition of equatorial Rossby waves, with phase speeds between 99 - 103m/s, relative to System III. We note that the high 5-micron radiances correlate well but not perfectly with high 8.57-micron radiances. Because the latter are modulated primarily by changes in the upper ammonia (NH3) ice cloud opacity, this correlation implies that changes in the ammonia ice cloud field may be responsible for the variability seen in the 5-m maps. During the NEB fade (2011 - early 2012), however, these otherwise ubiquitous features were absent, an atmospheric state not seen in decades. The ongoing NEB revival indicates nascent 5-m hot spots as early as April 2012, with corresponding visible dark spots. Their continuing growth through July 2012 indicates the possit.le re-establishment of Rossby waves. The South Equatorial Belt (SEB) and NEB revivals began similarly with an instability that developed into a major outbreak, and many similarities in the observed propagation of clear regions.

Compositional variations in the Mesoarchean chromites of the Nuggihalli schist belt, Western Dharwar Craton (India): potential parental melts and implications for tectonic setting

NASA Astrophysics Data System (ADS)

Mukherjee, Ria; Mondal, Sisir K.; Rosing, Minik T.; Frei, Robert

2010-12-01

The chromite deposits in the Archean Nuggihalli schist belt are part of a layered ultramafic-mafic sequence within the Western Dharwar Craton of the Indian shield. The 3.1-Ga ultramafic-mafic units occur as sill-like intrusions within the volcano-sedimentary sequences of the Nuggihalli greenstone belt that are surrounded by the tonalite-trondhjemite-granodiorite (TTG) suite of rocks. The entire succession is exposed in the Tagdur mining district. The succession has been divided into the lower and the upper ultramafic units, separated by a middle gabbro unit. The ultramafic units comprise of deformed massive chromitite bodies that are hosted within chromite-bearing serpentinites. The chromitite bodies occur in the form of pods and elongated lenses (~60-500 m by ~15 m). Detailed electron microprobe studies reveal intense compositional variability of the chromite grains in silicate-rich chromitite (~50% modal chromite) and serpentinite (~2% modal chromite) throughout the entire ultramafic sequence. However, the primary composition of chromite is preserved in the massive chromitites (~60-75% modal chromite) from the Byrapur and the Bhaktarhalli mining district of the Nuggihalli schist belt. These are characterized by high Cr-ratios (Cr/(Cr + Al) = 0.78-0.86) and moderate Mg-ratios (Mg/(Mg + Fe2+) = 0.38-0.58). The compositional variability occurs due to sub-solidus re-equilibration in the accessory chromite in the serpentinite (Mg-ratio = 0.01-0.38; Cr-ratio = 0.02-0.99) and in silicate-rich chromitite (Mg-ratio = 0.06-0.48; Cr-ratio = 0.60-0.99). In the massive chromitites, the sub-solidus re-equilibration for chromite is less or absent. However, the re-equilibration is prominent in the co-existing interstitial and included olivine (Fo96-98) and pyroxene grains (Mg-numbers = 97-99). Compositional variability on the scale of a single chromite grain occurs in the form of zoning, and it is common in the accessory chromite grains in serpentinite and in the altered grains in chromitite. In the zoned grains, the composition of the core is modified and the rim is ferritchromit. In general, ferritchromit occurs as irregular patches along the grain boundaries and fractures of the zoned grains. In this case, ferritchromit formation is not very extensive. This indicates a secondary low temperature hydrothermal origin of ferritchromit during serpentinization. In some occurrences, the ferritchromit rim is very well developed, and only a small relict core appears to remain in the chromite grain. However, complete alteration of the chromite grains to ferritchromit without any remnant core is also present. The regular, well-developed and continuous occurrence of ferritchromit rims around the chromite grain boundaries, the complete alteration of the chromite grains and the modification of the core composition indicate the alteration in the Nuggihalli schist belt to be intense, pervasive and affected by later low-grade metamorphism. The primary composition of chromite has been used to compute the nature of the parental melt. The parental melt calculations indicate derivation from a high-Mg komatiitic basalt that is similar to the composition of the komatiitic rocks reported from the greenstone sequences of the Western Dharwar Craton. Tectonic discrimination diagrams using the primary composition of chromites indicate a supra-subduction zone setting (SSZ) for the Archean chromitites of Nuggihalli and derivation from a boninitic magma. The composition of the komatiitic basalts resembles those of boninites that occur in subduction zones and back-arc rift settings. Formation of the massive chromitites in Nuggihalli may be due to magma mixing process involving hydrous high-Mg magmas or may be related to intrusions of chromite crystal laden magma; however, there is little scope to test these models because the host rocks are highly altered, serpentinized and deformed. The present configurations of the chromitite bodies are related to the multistage deformation processes that are common in Archean greenstone belts.

Landscape, community, countryside: linking biophysical and social scales in US Corn Belt agricultural landscapes

Treesearch

Ryan C. Atwell; Lisa A. Schulte; Lynne M. Westphal

2009-01-01

Understanding the interplay between ecological and social factors across multiple scales is integral to landscape change initiatives in productive agricultural regions such as the rural US Corn Belt. We investigated the cultural context surrounding the use of perennial cover types--such as stream buffers, wetlands, cellulosic bioenergy stocks, and diverse cropping...

The Fossilized Size Distribution of the Main Asteroid Belt

NASA Astrophysics Data System (ADS)

Bottke, W. F.; Durda, D.; Nesvorny, D.; Jedicke, R.; Morbidelli, A.

2004-05-01

The main asteroid belt evolved into its current state via two processes: dynamical depletion and collisional evolution. During the planet formation epoch, the primordial main belt (PMB) contained several Earth masses of material, enough to allow the asteroids to accrete on relatively short timescales (e.g., Weidenschilling 1977). The present-day main belt, however, only contains 5e-4 Earth masses of material (Petit et al. 2002). To explain this mass loss, we suggest the PMB evolved in the following manner: Planetesimals and planetary embryos accreted (and differentiated) in the PMB during the first few Myr of the solar system. Gravitational perturbations from these embryos dynamically stirred the main belt, enough to initiate fragmentation. When Jupiter reached its full size, some 10 Myr after the solar system's birth, its perturbations, together with those of the embryos, dynamically depleted the main belt region of > 99% of its bodies. Much of this material was sent to high (e,i) orbits, where it continued to pummel the surviving main belt bodies at high impact velocities for more than 100 Myr. While some differentiated bodies in the PMB were disrupted, most were instead scattered; only small fragments from this population remain. This period of comminution and dynamical evolution in the PMB created, among other things, the main belt's wavy size-frequency distribution, such that it can be considered a "fossil" from this violent early epoch. From this time forward, however, relatively little collisional evolution has taken place in the main belt, consistent with the surprising paucity of prominent asteroid families. We will show that the constraints provided by asteroid families and the shape of the main belt size distribution are essential to obtaining a unique solution from our model's initial conditions. We also use our model results to solve for the asteroid disruption scaling law Q*D, a critical function needed in all planet formation codes that include fragmentation between rocky planetesimals.

Search for Water in Outer Main Belt Based on AKARI Asteroid Catalog

NASA Astrophysics Data System (ADS)

Usui, Fumihiko

2012-06-01

We propose a program to search water ice on the surface of asteroids in the outer main belt regions, which have high albedo measured with AKARI. The distribution of water in the main belt provides important information to understanding of the formation and evolution of the solar system, because water is a good indicator of temperature in the early solar nebula. The existence of water ice is a hot topic in the solar system studies today. Water ice is recently found in the outer region of the main asteroid belt and some of them are linked to the main belt comets. Brand-new albedo data brought by AKARI opens the possibility of detection of water ice on the C-type asteroids. Here we propose to make the spectroscopic observations with the Subaru telescope in the near-infrared wavelengths to detect water ice on these high-albedo C-type asteroids. Thanks to a large aperture of Subaru telescope and a high altitude of Mauna Kea, it can be only possible to observe a weak signal of the existence of water on the surface of asteroids with a certain S/N. In addition, using the imaging data taken prior to IRCS spectroscopic mode, we intend to seek any comet-like activities by investigating diffuseness of the asteroids, which can be detected by comparing the observed point-spread functions with those of field stars.

The effectiveness of air bags.

PubMed

Barry, S; Ginpil, S; O'Neill, T J

1999-11-01

Previous research has shown that the installation of air bags in vehicles significantly reduces crash related deaths, but these analyses have used statistical techniques which have not been capable of controlling for other major determinants of crash survival. This study analysed data from the US FARS database of fatal crashes using conditional logistic regression which is simultaneously able to estimate occupant protection effects for a range of variables. Results of the analysis provided a comparative quantification of both the effect of the air bag as well as other well known determinants of occupant crash survival (age, seat belt use, and gender). When potentially confounding variables were controlled, both the driver and passenger side air bag devices were shown to significantly reduce the probability of death in direct frontal collisions, but the effect size calculated was small compared to the effect of the seat belt. The effect size may also be very small in absolute terms depending on the severity of the crash involved. Given the limited benefit of the air bag, efforts to promote air bags seem particularly difficult to justify in countries such as the United States where the vastly superior occupant protection of the seat belt is under-utilised.

The Diversity and Evolution of Different type Granitoids in Eastern Dharwar Craton: Evidence from "Arc-Plume" Collision in Neoarchaean

NASA Astrophysics Data System (ADS)

Nandy, J.; Dey, S.

2017-12-01

Neoarchaean crustal growth, role of plate tectonics and potential secular changes is still disoriented in Dharwar craton. To provide constraints on these questions, geochronological and geochemical data are presented on the unstudied granitoids associated with Kadiri greenstone belt, eastern Dharwar craton. Five diverse type of granitoids suites are identified in that area. Field setting, petrography, whole rock geochemistry study with Sm-Nd isotopes and zircon dates help to identify their source and petrogenesis. Along the eastern margin of the Kadiri belt a sanukitoid-like granitoid body is exposed which was probably derived from a metasomatised mantle wedge above a subduction zone followed by some older crustal contamination. Along the western margin transitional TTG is exposed displaying an intrusive relation with Kadiri dacite-rhyolite. This suite is interpreted to be derived from a mafic source with some enriched crustal component. Further east and west vast area is occupied highly silicic biotite monzogranite which is enriched in LILE, high K2O/Na2O. These granitoids are product of intracrustal shallow melting. At the south-eastern tip of the Kadiri belt occurs a well-foliated and banded transitional TTG which was probably derived from melting of mafic source with some contribution of felsic crustal material. At the north-eastern tip of the belt a highly silicic ferroan granitoid is exposed. Geochemical characteristics indicate that it is A-type granite, produced from shallow melting of a felsic crustal source. The basalt in greenstone belt is generated in oceanic plateau setting and granitoids in arc setting in different time. A tectonic scenario envisaging collision between an arc and oceanic plateau followed by repeated slab break-off and crustal recycling is proposed to explain the evolution of the terrain.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morales, F. Y.; Bryden, G.; Werner, M. W.

We present dual-band Herschel /PACS imaging for 59 main-sequence stars with known warm dust ( T {sub warm} ∼ 200 K), characterized by Spitzer . Of 57 debris disks detected at Herschel wavelengths (70 and/or 100 and 160 μ m), about half have spectral energy distributions (SEDs) that suggest two-ring disk architectures mirroring that of the asteroid–Kuiper Belt geometry; the rest are consistent with single belts of warm, asteroidal material. Herschel observations spatially resolve the outer/cold dust component around 14 A-type and 4 solar-type stars with two-belt systems, 15 of which for the first time. Resolved disks are typically observedmore » with radii >100 AU, larger than expected from a simple blackbody fit. Despite the absence of narrow spectral features for ice, we find that the shape of the continuum, combined with resolved outer/cold dust locations, can help constrain the grain size distribution and hint at the dust’s composition for each resolved system. Based on the combined Spitzer /IRS+Multiband Imaging Photometer (5-to-70 μ m) and Herschel /PACS (70-to-160 μ m) data set, and under the assumption of idealized spherical grains, we find that over half of resolved outer/cold belts are best fit with a mixed ice/rock composition. Minimum grain sizes are most often equal to the expected radiative blowout limit, regardless of composition. Three of four resolved systems around the solar-type stars, however, tend to have larger minimum grains compared to expectation from blowout ( f {sub MB} = a {sub min}/ a {sub BOS} ∼ 5). We also probe the disk architecture of 39 Herschel -unresolved systems by modeling their SEDs uniformly, and find them to be consistent with 31 single- and 8 two-belt debris systems.« less

Design of temperature detection device for drum of belt conveyor

NASA Astrophysics Data System (ADS)

Zhang, Li; He, Rongjun

2018-03-01

For difficult wiring and big measuring error existed in the traditional temperature detection method for drum of belt conveyor, a temperature detection device for drum of belt conveyor based on Radio Frequency(RF) communication is designed. In the device, detection terminal can collect temperature data through tire pressure sensor chip SP370 which integrates temperature detection and RF emission. The receiving terminal which is composed of RF receiver chip and microcontroller receives the temperature data and sends it to Controller Area Network(CAN) bus. The test results show that the device meets requirements of field application with measuring error ±3.73 ° and single button battery can provide continuous current for the detection terminal over 1.5 years.

Approximation of functions and their conjugates in variable Lebesgue spaces

NASA Astrophysics Data System (ADS)

Volosivets, S. S.

2017-01-01

One-sided Steklov means are used to introduce moduli of continuity of natural order in variable Lp(\\cdot)2π-spaces. A direct theorem of Jackson- Stechkin type and an inverse theorem of Salem-Stechkin type are given. Similar results are obtained for the conjugate functions. Bibliography: 24 titles.

Plains tectonism on Venus: The deformation belts of Lavinia Planitia

NASA Technical Reports Server (NTRS)

Squyres, Steven W.; Jankowski, David G.; Simons, Mark; Solomon, Sean C.; Hager, Bradford H.; Mcgill, George E.

1993-01-01

High-resolution radar images from the Magellan spacecraft have revealed the first details of the morphology of the Lavinia Planitia region of Venus. A number of geologic units can be distinguished, including volcanic plains units with a range of ages. Transecting these plains over much of the Lavinia region are two types of generally orthogonal features that we interpret to be compressional wrinkle ridges and extensional grooves. The dominant tectonic features of Lavinia are broad elevated belts of intense deformation that transect the plains with complex geometry. They are many tens to a few hundred kilometers wide, as much as 1000 km long, and elevated hundreds of meters above the surrounding plains. Two classes of deformation belts are seen in the Lavinia region. 'Ridge belts' are composed of parallel ridges, each a few hundred meters in elevation, that we interpret to be folds. Typical fold spacings are 5-10 km. 'Fracture belts' are dominated instead by intense faulting, with faults in some instances paired to form narrow grabens. There is also some evidence for modest amounts of horizontal shear distributed across both ridge and fracture belts. Crosscutting relationships among the belts show there to be a range in belt ages. In western Lavinia, in particular, many ridge and fracture belts appear to bear a relationship to the much smaller wrinkle ridges and grooves on the surrounding plains: ridge morphology tends to dominate belts that lie more nearly parallel to local plains wrinkle ridges, and fracture morphology tends to dominate belts that lie more nearly parallel to local plains grooves. We use simple models to explore the formation of ridge and fracture belts. We show that convective motions in the mantle can couple to the crust to cause horizontal stresses of a magnitude sufficient to induce the formation of deformation belts like those observed in Lavinia. We also use the small-scale wavelengths of deformation observed within individual ridge belts to place an approximate lower limit on the venusian thermal gradient in the Lavinia region at the time of deformation.

Pattern of seat belt wearing in Nanjing, China

PubMed Central

Routley, V; Ozanne‐Smith, J; Li, D; Hu, X; Wang, P; Qin, Y

2007-01-01

Objective To describe the patterns of seat belt wearing in Nanjing, China for drivers, front seat passengers, and rear occupants of motor vehicles. Design Roadside observational study. Setting Four sites in central and northern Nanjing during daylight hours over 1 week in April 2005. Subjects Drivers and passengers of 17 147 cars, taxis, goods vans, and pickups, which traveled in the inside traffic lane. Main outcome measures Percentage seat belt wearing for each of seating position, age/sex, time of day, vehicle type, day of week. Results The rate of seat belt wearing was significantly higher in drivers (67.3%, 95% CI 66.6 to 68.0) than front seat passengers (18.9%, 95% CI, 18.0 to 19.8). It was negligible for second front seat passengers (2.6%, 95% CI 0.3 to 4.9) and rear seat passengers (0.5%, 95% CI 0.3 to 0.7). Belt tampering, such that protection would be reduced in the event of a crash, was observed for 18.5% of taxi drivers. Drivers were most likely to wear seat belts in cars and vans and at a city roundabout; front seat passengers were most likely to wear seat belts in non‐taxi vehicles, during the evening rush hour, if the driver was wearing a belt, and on the local north road. Drivers were least likely to wear a belt in the early morning, in pickups and taxis, on Tuesday (or the following week), and on the local north road; front seat passengers were least likely to wear a belt in taxis and if the driver was not wearing a belt. Conclusions Rates of seat belt wearing by passengers were low despite national legislation and provincial regulations coming into effect several months before the survey. Combined education and enforcement are necessary accompaniments to legislation. PMID:18056315

Architecture and Channel-Belt Clustering in the Fluvial lower Wasatch Formation, Uinta Basin, Utah

NASA Astrophysics Data System (ADS)

Pisel, J. R.; Pyles, D. R.; Bracken, B.; Rosenbaum, C. D.

2013-12-01

The Eocene lower Wasatch Formation of the Uinta Basin contains exceptional outcrops of low net-sand content (27% sand) fluvial strata. This study quantitatively documents the stratigraphy of a 7 km wide by 300 meter thick strike-oriented outcrop in order to develop a quantitative data base that can be used to improve our knowledge of how some fluvial systems evolve over geologic time scales. Data used to document the outcrop are: (1) 550 meters of decimeter to half meter scale resolution stratigraphic columns that document grain size and physical sedimentary structures; (2) detailed photopanels used to document architectural style and lithofacies types in the outcrop; (3) thickness, width, and spatial position for all channel belts in the outcrop, and (4) directional measurements of paleocurrent indicators. Two channel-belt styles are recognized: lateral and downstream accreting channel belts; both of which occur as either single or multi-story. Floodplain strata are well exposed and consist of overbank fines and sand-rich crevasse splay deposits. Key upward and lateral characteristics of the outcrop documented herein are the following. First, the shapes of 243 channels are documented. The average width, thickness and aspect ratios of the channel belts are 110 m, 7 m, and 16:1, respectively. Importantly, the size and shape of channel belts does not change upward through the 300 meter transect. Second, channels are documented to spatially cluster. 9 clusters are documented using a spatial statistic. Key upward patterns in channel belt clustering are a marked change from non-amalgamated isolated channel-belt clusters to amalgamated channel-belt clusters. Critically, stratal surfaces can be correlated from mudstone units within the clusters to time-equivalent floodplain strata adjacent to the cluster demonstrating that clusters are not confined within fluvial valleys. Finally, proportions of floodplain and channel belt elements underlying clusters and channel belts vary with the style of clusters and channel belts laterally and vertically within the outcrop.

Size and Perihelion Distribution of S and Q-type Asteroid Spectral Slopes from the Near Earth Region Through the Main Belt

NASA Astrophysics Data System (ADS)

Graves, Kevin; Minton, David A.; Hirabayashi, Masatoshi; Carry, Benoit; DeMeo, Francesca E.

2016-10-01

High resolution spectral observations of small S-type and Q-type Near Earth Asteroids (NEAs) have shown two important trends. The spectral slope of these asteroids, which is a good indication of the amount of space weathering the surface has received, has been shown to decrease with decreasing perihelion and size. Specifically, these trends show that there are less weathered surfaces at low perihelion and small sizes. With recent results from all-sky surveys such as the Sloan Digital Sky Survey's (SDSS) Moving Object Catalog, we have gained an additional data set to test the presence of these trends in the NEAs as well as the Mars Crossers (MCs) and the Main Belt. We use an analog to the spectral slope in the SDSS data which is the slope through the g', r' and i' filters, known as the gri-slope, to investigate the amount of weathering that is present among small asteroids throughout the inner solar system. We find that the trend of the gri-slope decreases with decreasing size at nearly the same rate in the Main Belt as in the MC and NEA regions. We propose that these results suggest a ubiquitous presence of Q-types and S-types with low spectral slopes at small sizes throughout the inner solar system, from the Main Belt to the NEA region. Additionally, we suggest that the trend of decreasing spectral slope with perihelion may only be valid at perihelia of approximately less than 1 AU. These results suggest a change in the interpretation for the formation of Q-type asteroids. Planetary encounters may help to explain the high fraction of Q-types at low perihelia, but another process which is present everywhere must also be refreshing the surfaces of these asteroids. We suggest the Yarkovsky-O'Keefe-Radzievskii-Paddack (YORP) effect as a possible mechanism.

Morphotectonics of the central Muertos thrust belt and Muertos Trough (northeastern Caribbean)

USGS Publications Warehouse

Granja, Bruna J.L.; ten Brink, Uri S.; Carbó-Gorosabel, Andrés; Muñoz-Martín, A.; Gomez, Ballesteros M.

2009-01-01

Multibeam bathymetry data acquired during the 2005 Spanish R/V Hesp??rides cruise and reprocessed multichannel seismic profiles provide the basis for the analysis of the morphology and deformation in the central Muertos Trough and Muertos thrust belt. The Muertos Trough is an elongated basin developed where the Venezuelan Basin crust is thrusted under the Muertos fold-and-thrust belt. Structural variations along the Muertos Trough are suggested to be a consequence of the overburden of the asymmetrical thrust belt and by the variable nature of the Venezuelan Basin crust along the margin. The insular slope can be divided into three east-west trending slope provinces with high lateral variability which correspond to different accretion stages: 1) The lower slope is composed of an active sequence of imbricate thrust slices and closed fold axes, which form short and narrow accretionary ridges and elongated slope basins; 2) The middle slope shows a less active imbricate structure resulting in lower superficial deformation and bigger slope basins; 3) The upper slope comprises the talus region and extended terraces burying an island arc basement and an inactive imbricate structure. The talus region is characterized by a dense drainage network that transports turbidite flows from the islands and their surrounding carbonate platform areas to the slope basins and sometimes to the trough. In the survey area the accommodation of the ongoing east-west differential motion between the Hispaniola and the Puerto Rico-Virgin Islands blocks takes place by means of diffuse deformation. The asymmetrical development of the thrust belt is not related to the geological conditions in the foreland, but rather may be caused by variations in the geometry and movement of the backstop. The map-view curves of the thrust belt and the symmetry of the recesses suggest a main north-south convergence along the Muertos margin. The western end of the Investigator Fault Zone comprises a broad band of active normal faults which result in high instability of the upper insular slope. ?? 2009 Elsevier B.V.

Formation and inversion of transtensional basins in the western part of the Lachlan Fold Belt, Australia, with emphasis on the Cobar Basin

NASA Astrophysics Data System (ADS)

Glen, R. A.

The Palaeozoic history of the western part of the Lachlan Fold Belt in New South Wales was dominated by strike-slip tectonics. In the latest Silurian to late Early Devonian, an area of crust >25,000 km 2 lying west of the Gilmore Suture underwent regional sinistral transtension, leading to the development of intracratonic successor basins, troughs and flanking shelves. The volcaniclastic deep-water Mount Hope Trough and Rast Trough, the siliciclastic Cobar Basin and the volcanic-rich Canbelego-Mineral Hill Belt of the Kopyje Shelf all were initiated around the Siluro-Devonian boundary. They all show clear evidence of having evolved by both active syn-rift processes and passive later post-rift (sag-phase) processes. Active syn-rift faulting is best documented for the Cobar Basin and Mount Hope Trough. In the former case, the synchronous activity on several fault sets suggests that the basin formed by sinistral transtension in response to a direction of maximum extension oriented NE-SW. Structures formed during inversion of the Cobar Basin and Canbelego-Mineral Hill Belt indicate closure under a dextral transpressive strain regime, with a far-field direction of maximum shortening oriented NE-SW. In the Cobar Basin, shortening was partitioned into two structural zones. A high-strain zone in the east was developed into a positive half-flower structure by re-activation of early faults and by formation of short-cut thrusts, some with strike-slip movement, above an inferred steep strike-slip fault. Intense subvertical cleavage, a steep extension lineation and variably plunging folds are also present. A lower-strain zone to the west developed by syn-depositional faults being activated as thrusts soling into a gently dipping detachment. A subvertical cleavage and steep extension lineation are locally present, and variably plunging folds are common. Whereas Siluro-Devonian basin-opening appeared to be synchronous in the western part of the fold belt, the different period of basin inversion in the Cobar region (late Early Devonian and Carboniferous) may reflect different movement histories on the master strike-slip faults in this part of the fold belt, the Gilmore Suture and Kiewa Fault.

Regression models for explaining and predicting concentrations of organochlorine pesticides in fish from streams in the United States

USGS Publications Warehouse

Nowell, Lisa H.; Crawford, Charles G.; Gilliom, Robert J.; Nakagaki, Naomi; Stone, Wesley W.; Thelin, Gail; Wolock, David M.

2009-01-01

Empirical regression models were developed for estimating concentrations of dieldrin, total chlordane, and total DDT in whole fish from U.S. streams. Models were based on pesticide concentrations measured in whole fish at 648 stream sites nationwide (1992-2001) as part of the U.S. Geological Survey's National Water Quality Assessment Program. Explanatory variables included fish lipid content, estimates (or surrogates) representing historical agricultural and urban sources, watershed characteristics, and geographic location. Models were developed using Tobit regression methods appropriate for data with censoring. Typically, the models explain approximately 50 to 70% of the variability in pesticide concentrations measured in whole fish. The models were used to predict pesticide concentrations in whole fish for streams nationwide using the U.S. Environmental Protection Agency's River Reach File 1 and to estimate the probability that whole-fish concentrations exceed benchmarks for protection of fish-eating wildlife. Predicted concentrations were highest for dieldrin in the Corn Belt, Texas, and scattered urban areas; for total chlordane in the Corn Belt, Texas, the Southeast, and urbanized Northeast; and for total DDT in the Southeast, Texas, California, and urban areas nationwide. The probability of exceeding wildlife benchmarks for dieldrin and chlordane was predicted to be low for most U.S. streams. The probability of exceeding wildlife benchmarks for total DDT is higher but varies depending on the fish taxon and on the benchmark used. Because the models in the present study are based on fish data collected during the 1990s and organochlorine pesticide residues in the environment continue to decline decades after their uses were discontinued, these models may overestimate present-day pesticide concentrations in fish. ?? 2009 SETAC.

First Results of Modeling Radiation Belt Electron Dynamics with the SAMI3 Plasmasphere Model

NASA Astrophysics Data System (ADS)

Komar, C. M.; Glocer, A.; Huba, J.; Fok, M. C. H.; Kang, S. B.; Buzulukova, N.

2017-12-01

The radiation belts were one of the first discoveries of the Space Age some sixty years ago and radiation belt models have been improving since the discovery of the radiation belts. The plasmasphere is one region that has been critically important to determining the dynamics of radiation belt populations. This region of space plays a critical role in describing the distribution of chorus and magnetospheric hiss waves throughout the inner magnetosphere. Both of these waves have been shown to interact with energetic electrons in the radiation belts and can result in the energization or loss of radiation belt electrons. However, radiation belt models have been historically limited in describing the distribution of cold plasmaspheric plasma and have relied on empirically determined plasmasphere models. Some plasmasphere models use an azimuthally symmetric distribution of the plasmasphere which can fail to capture important plasmaspheric dynamics such as the development of plasmaspheric drainage plumes. Previous work have coupled the kinetic bounce-averaged Comprehensive Inner Magnetosphere-Ionosphere (CIMI) model used to model ring current and radiation belt populations with the Block-adaptive Tree Solar wind Roe-type Upwind Scheme (BATSRUS) global magnetohydrodynamic model to self-consistently obtain the magnetospheric magnetic field and ionospheric potential. The present work will utilize this previous coupling and will additionally couple the SAMI3 plasmasphere model to better represent the dynamics on the plasmasphere and its role in determining the distribution of waves throughout the inner magnetosphere. First results on the relevance of chorus, hiss, and ultralow frequency waves on radiation belt electron dynamics will be discussed in context of the June 1st, 2013 storm-time dropout event.

Oxygen isotope reservoirs in the outer asteroid belt inferred from oxygen isotope systematics of chondrule olivines and isolated forsterite and olivine grains in Tagish Lake-type carbonaceous chondrites, WIS 91600 and MET 00432

NASA Astrophysics Data System (ADS)

Yamanobe, Masakuni; Nakamura, Tomoki; Nakashima, Daisuke

2018-03-01

To understand oxygen isotope ratios and redox conditions of the chondrule formation environments of the outer rigions of the asteroid belt, we analyzed major element concentrations and oxygen isotope ratios of olivine grains in chondrules, isolated forsterite, and isolated olivine from the WIS 91600 and MET 00432 carbonaceous chondrites, which are thought to have originated from D-type asteroids located in the outer asteroid belt. The oxygen isotope ratios of individual chondrules and isolated grains show a wide variation in δ18O from -9.9‰ to +9.1‰ along the carbonaceous chondrite anhydrous mineral (CCAM) and primitive chondrule mineral (PCM) lines. The Δ17O (= δ17O - 0.52 × δ18O) values of the measured objects increase with decreasing Mg#; i.e., FeO-poor objects (Mg# > 90; type I chondrules and isolated forsterites) mainly have Δ17O values of ca. -6‰, and FeO-rich objects (Mg# < 90; type II chondrules and isolated olivines) have Δ17O values ranging from -3‰ to +2‰. Similar trends are observed for ferromagnesian silicate particles from comet Wild2 and CR chondrite chondrules, particularly in terms of FeO-rich objects with Δ17O values ranging from -3‰ to +2‰. It is suggested that FeO-rich objects formed in the outer regions of the asteroid belt and were transported to the outer solar nebular regions where comet Wild2 formed.

Spectral characterization of V-type asteroids: are all the basaltic objects coming from Vesta?

NASA Astrophysics Data System (ADS)

Ieva, S.; Fulvio, D.; Dotto, E.; Lazzaro, D.; Perna, D.; Strazzulla, G.; Fulchignoni, M.

In the last twenty-five years several small basaltic V-type asteroids have been identified all around the main belt. Most of them are members of the Vesta dynamical family, but an increasingly large number appear to have no link with it. The question that arises is whether all these basaltic objects do indeed come from Vesta. In the light of the Dawn mission, who visited Vesta in 2011-2012, recent works were dedicated to the observation of several new V-type asteroids and their comparison with laboratory data (Fulvio et al., \\cite{Fulvio2015}), and to a statistical analysis of the spectroscopic and mineralogical properties of the largest sample of V-types ever collected (Ieva et al., \\cite{Ieva2015}, with the objective to highlight similarities and differences among objects belonging and not belonging to the Vesta dynamical family. Laboratory experiments support the idea that V-type NEAs spectral properties could be due to a balance of space weathering and rejuvenation processes triggered by close encounters with terrestrial planets. Statistical analysis shows that although most of the V-type asteroids in the inner main belt do have a surface composition compatible with Vesta family members, this seem not to be the case for V-types in the middle and outer main belt. For these Middle and Outer V-types (MOVs), their sizes, spectral parameters and location far away from the Vesta dynamical region point to a different origin than Vesta.

Sources of orbital debris and the projected environment for future spacecraft

NASA Technical Reports Server (NTRS)

Kessler, D. J.

1980-01-01

The major source of the nearly 5000 objects currently observed orbiting the earth is from rocket explosions. These explosions have almost certainly produced an even larger unobserved population. If the current trend continues, collisions between orbiting fragments and other space objects could be frequent. By the year 2000 satellite fragmentation by hypervelocity collisions could become the major source of earth orbiting objects, resulting in a self propagating debris belt. The flux within this belt could exceed the meteoroid flux, affecting future spacecraft design.

Geometry of rear seats and child restraints compared to child anthropometry.

PubMed

Bilston, Lynne E; Sagar, Nipun

2007-10-01

The objective of this study was to evaluate the geometry of a wide range of restraints (child restraints, booster seats and rear seats) used by children, and how these match their anthropometry, and to determine limitations to restraint size for the population of children using them. The study is motivated by the widespread premature graduation from one restraint type to another, which parents often attribute to children outgrowing their previous restraint. Currently, recommended transitions are based on a small sample of vehicles and children. Outboard rear seat and seat belt geometry (anchorage locations, sash belt angles) from 50 current model vehicles were measured using a custom-developed measuring jig. For 17 child restraints, a 3-dimensional measuring arm was used to measure the geometry of the restraint including interior size and strap slot locations (where relevant). These measurements were compared to anthropometric measurements, to determine the suitability of a given restraint for children of particular ages. The results for the rear seat geometry indicate that all seat cushions were too deep for a child whose upper leg length is at the 50th percentile until approximately 11.5 years, and half of vehicle seat cushions were too deep for a 15 year old child whose upper leg length is at the 50th percentile. Sash belt geometry was more variable, with approximately a third of vehicles accommodating 6-8 year olds who approximate the shoulder geometry measurements at the 50th percentile. Dedicated child restraints accommodated most children within recommended age groups, with two exceptions. Several high back booster seats were not tall enough for a child whose seated height is at the 50th percentile for 8 year olds (who is still too short for an adult belt according to current guidelines and the results from the rear seat geometry study), and a small number of forward facing restraints and high back boosters were too narrow for children at the upper end of the recommended age ranges. Analysis of the results from this study indicates that alterations in restraint geometry, particularly shortening the seat cushion, allowing for adjustable upper sash belt anchorages in the rear seat of vehicles, and increasing the height of high back booster seats would substantially improve the fit of restraints for child occupants. This data confirms findings from a recent study that looked only at rear seat cushion depths and provides new data on seat belt and child restraint geometry for child occupants.

[Roadside observation on the use of safety belt in Guangzhou and Nanning cites of China].

PubMed

Li, Li-ping; Stevenson, Mark; Ivers, Rebecca; Zhou, Ying

2006-08-01

To determine the rates of correct use of safety belt (CUSB) among drivers and front seat passengers in Guangzhou and Nanning through roadside observation and to provide scientific evidence for the development of intervention plan and to strengthen road safety law enforcement. Observational sites were randomly selected from three road types (Highway, Main Street and Subordinate Street). Targeted automobiles were observed at each site at four different times and uniformed checklists were used to record safety belt use during observations. Within each vehicle, belt use by drivers of different sex, road type, workday/weekend, day/night and seating position were calculated. Data was analyzed, using Chi-square tests to compare the statistic significance. (1)The rate of CUSB and non-use rate among drivers were higher in Nanning than in Guangzhou (P= 0.00) but the rate of incorrect use was on the contrarary. (2) The rate of CUSB by front seat passengers in Guangzhou was higher than that in Nanning (P = 0.04); as well as the rate of (P = 0.00) incorrect use while the non-use rate was on the contrarary. (3)In general, the rate of CUSB was higher on highways than on local streets (P = 0.00). (4) The CUSB rate of drivers and front seat passengers was higher at daytime than at night (P = 0.00), and the rate of incorrect use was higher at working days than weekends (P = 0.00). (5) The CUSB rate was higher for female drivers than for males in Guangzhou (P = 0.00), but there no statistical significance was found in Nanning (P = 0.21). Results suggested that intervention actions should be undertaken to raise the awareness of the importance of safety belt use. Effective public information and education programs, law enforcement and mandatory safety belt use, prioritizing programs on people neglegent to the importance are necessary to increase the safety belt use and to decrease the mortality and injuries caused by traffic accidents.

Spectra of small Koronis family members

NASA Astrophysics Data System (ADS)

Thomas, C.; Rivkin, A.; Trilling, D.; Moskovitz, N.

2014-07-01

The space-weathering process and its implications for the relationships between S- and Q-type asteroids and ordinary chondrite meteorites are long-standing problems in asteroid science. Although the visible and near-infrared spectra of S- and Q-type objects qualitatively show the same absorption features and quantitatively show evidence of the same minerals, the S types display increased spectral slopes and muted absorption features compared to the Q types. This spectral mismatch is consistent with the effects of the space weathering process. Binzel et al. provided the missing link between Q- and S-type bodies in near-Earth space by showing a reddening of spectral slope in objects from 0.1 to 5 km that corresponded to the transition from Q- to S-type spectra. This result implied that size, and therefore age, is related to the relationship between Q- and S-type. The existence of Q-type objects in the main belt was not confirmed until Mothe-Diniz and Nesvorny (2008) found them in young S-type clusters. To investigate the trend from Q to S in the main belt, we examined space weathering within the old main-belt Koronis family using a spectrophotometric survey (Rivkin et al. 2011, Thomas et al. 2011). Rivkin et al. (2011) identified several potential Q-type objects within the Koronis family. Our Q-type candidates were identified using broad-band spectrophotometry and could not be taxonomically classified on that basis alone. We obtained follow-up visible and near-infrared spectral observations of our potential Q-type objects, (26970) Elias, (45610) 2000 DJ_{48}, and (37411) 2001 XF_{152}, using Gemini and Magellan. We will present the results of these spectral follow-up observations. Observations of (26970) Elias demonstrate that the object is more consistent with the average Q-type spectrum than the average S-type spectrum.

Extrusional Tectonics over Plate Corner: an Example in Northern Taiwan

NASA Astrophysics Data System (ADS)

Lu, Chia-Yu; Lee, Jian-Cheng; Li, Zhinuo; Lee, Ching-An; Yeh, Chia-Hung

2016-04-01

In northern Taiwan, contraction, transcurrent shearing, block rotation and extension are four essential tectonic deformation mechanisms involved in the progressive deformation of this arcuate collision mountain belt. The neotectonic evolution of the Taiwan mountain belt is mainly controlled not only by the oblique convergence between the Eurasian plate and the Philippine Sea plate but also the corner shape of the plate boundary. Based on field observations and analyses, and taking geophysical data (mostly GPS) and experimental modelling into account, we interpret the curved belt of northern Taiwan as a result of of contractional deformation (with compression, thrust-sheet stacking & folding, back thrust duplex & back folding) that induced vertical extrusion, combined with increasing transcurrent & rotational deformation (with transcurrent faulting, bookshelf-type strike-slip faulting and block rotation) that induced transcurrent/rotational extrusion and extension deformation which in turn induced extensional extrusion. As a consequence, a special type of extrusional folds was formed in association with contractional, transcurrent & rotational and extensional extrusions subsequently. The extrusional tectonics in northern Taiwan reflect a single, albeit complicated, regional pattern of deformation. The crescent-shaped mountain belt of Northeastern Taiwan develops in response to oblique indentation by an asymmetric wedge indenter, retreat of Ryukyu trench and opening of the Okinawa trough.

Extrusional Tectonics at Plate Corner: an Example in Northern Taiwan

NASA Astrophysics Data System (ADS)

Lu, C. Y.; Lee, J. C.; Li, Z.; Yeh, C. H.; Lee, C. A.

2015-12-01

In northern Taiwan, contraction, transcurrent shearing, block rotation and extension are four essential tectonic deformation mechanisms involved in the progressive deformation of this arcuate collision mountain belt. The neotectonic evolution of the Taiwan mountain belt is mainly controlled not only by the oblique convergence between the Eurasian plate and the Philippine Sea plate but also the corner shape of the plate boundary. Based on field observations and analyses, and taking geophysical data (mostly GPS) and experimental modelling into account, we interpret the curved belt of northern Taiwan as a result of of contractional deformation (with compression, thrust-sheet stacking & folding, back thrust duplex & back folding) that induced vertical extrusion, combined with increasing transcurrent & rotational deformation (with transcurrent faulting, bookshelf-type strike-slip faulting and block rotation) that induced transcurrent/rotational extrusion and extension deformation which in turn induced extensional extrusion. As a consequence, a special type of extrusional folds was formed in association with contractional, transcurrent & rotational and extensional extrusions subsequently. The extrusional tectonics in northern Taiwan reflect a single, albeit complicated, regional pattern of deformation. The crescent-shaped mountain belt of Northeastern Taiwan develops in response to oblique indentation by an asymmetric wedge indenter and opening of the Okinawa trough at plate corner.

The application of a piezo-resistive cardiorespiratory sensor system in an automobile safety belt.

PubMed

Hamdani, Syed Talha Ali; Fernando, Anura

2015-03-30

Respiratory and heart failure are conditions that can occur with little warning and may also be difficult to predict. Therefore continuous monitoring of these bio-signals is advantageous for ensuring human health. The car safety belt is mainly designed to secure the occupants of the vehicle in the event of an accident. In the current research a prototype safety belt is developed, which is used to acquire respiratory and heart signals, under laboratory conditions. The current safety belt is constructed using a copper ink based nonwoven material, which works based on the piezo-resistive effect due to the pressure exerted on the sensor as a result of expansion of the thorax/abdomen area of the body for respiration and due to the principle of ballistocardiography (BCG) in heart signal sensing. In this research, the development of a theoretical model to qualitatively describe the piezo-resistive material is also presented in order to predict the relative change in the resistance of the piezo-resistive material due to the pressure applied.

Rural and Urban Differences in Passenger-Vehicle-Occupant Deaths and Seat Belt Use Among Adults - United States, 2014.

PubMed

Beck, Laurie F; Downs, Jonathan; Stevens, Mark R; Sauber-Schatz, Erin K

2017-09-22

Motor-vehicle crashes are a leading cause of death in the United States. Compared with urban residents, rural residents are at an increased risk for death from crashes and are less likely to wear seat belts. These differences have not been well described by levels of rurality. 2014. Data from the Fatality Analysis Reporting System (FARS) and the Behavioral Risk Factor Surveillance System (BRFSS) were used to identify passenger-vehicle-occupant deaths from motor-vehicle crashes and estimate the prevalence of seat belt use. FARS, a census of U.S. motor-vehicle crashes involving one or more deaths, was used to identify passenger-vehicle-occupant deaths among adults aged ≥18 years. Passenger-vehicle occupants were defined as persons driving or riding in passenger cars, light trucks, vans, or sport utility vehicles. Death rates per 100,000 population, age-adjusted to the 2000 U.S. standard population and the proportion of occupants who were unrestrained at the time of the fatal crash, were calculated. BRFSS, an annual, state-based, random-digit-dialed telephone survey of the noninstitutionalized U.S. civilian population aged ≥18 years, was used to estimate prevalence of seat belt use. FARS and BRFSS data were analyzed by a six-level rural-urban designation, based on the U.S. Department of Agriculture 2013 rural-urban continuum codes, and stratified by census region and type of state seat belt enforcement law (primary or secondary). Within each census region, age-adjusted passenger-vehicle-occupant death rates per 100,000 population increased with increasing rurality, from the most urban to the most rural counties: South, 6.8 to 29.2; Midwest, 5.3 to 25.8; West, 3.9 to 40.0; and Northeast, 3.5 to 10.8. (For the Northeast, data for the most rural counties were not reported because of suppression criteria; comparison is for the most urban to the second-most rural counties.) Similarly, the proportion of occupants who were unrestrained at the time of the fatal crash increased as rurality increased. Self-reported seat belt use in the United States decreased with increasing rurality, ranging from 88.8% in the most urban counties to 74.7% in the most rural counties. Similar differences in age-adjusted death rates and seat belt use were observed in states with primary and secondary seat belt enforcement laws. Rurality was associated with higher age-adjusted passenger-vehicle-occupant death rates, a higher proportion of unrestrained passenger-vehicle-occupant deaths, and lower seat belt use among adults in all census regions and regardless of state seat belt enforcement type. Seat belt use decreases and age-adjusted passenger-vehicle-occupant death rates increase with increasing levels of rurality. Improving seat belt use remains a critical strategy to reduce crash-related deaths in the United States, especially in rural areas where seat belt use is lower and age-adjusted death rates are higher than in urban areas. States and communities can consider using evidence-based interventions to reduce rural-urban disparities in seat belt use and passenger-vehicle-occupant death rates.

The Southeast Asian Tin Belt

NASA Astrophysics Data System (ADS)

Schwartz, M. O.; Rajah, S. S.; Askury, A. K.; Putthapiban, P.; Djaswadi, S.

1995-07-01

The Southeast Asian Tin Belt is a north-south elongate zone 2800 km long and 400 km wide, extending from Burma (Myanmar) and Thailand to Peninsular Malaysia and the Indonesian Tin Islands. Altogether 9.6 million tonnes of tin, equivalent to 54% of the world's tin production is derived from this region. Most of the granitoids in the region can be grouped geographically into elongate provinces or belts, based on petrographic and geochronological features. - The Main Range Granitoid Province in western Peninsular Malaysia, southern Peninsular Thailand and central Thailand is almost entirely made up of biotite granite (184-230 Ma). Tin deposits associated with these granites contributed 55% of the historic tin production of Southeast Asia. - The Northern Granitoid Province in northern Thailand (0.1% of tin production) also has dominant biotite granite (200-269 Ma) but it is distinguished by abundant post-intrusion deformation. - The Eastern Granitoid Province extends from eastern Peninsular Malaysia to eastern Thailand. The Malaysian part is subdivided into the East Coast Belt (220-263 Ma), Boundary Range Belt (197-257 Ma) and Central Belt (79-219 Ma). The granitoids cover a wide compositional range from biotite granite to hornblende-biotite granite/granodiorite and diorite-gabbro. Tin deposits are associated with biotite granite in the East Coast Belt (3% of tin production). The granitoids in the other areas of the Eastern Granitoid Province are barren. - The Western Granitoid Province (22-149 Ma) in northern Peninsular Thailand, western Thailand and Burma has biotite granite and hornblende-biotite granite/granodiorite. Tin deposits are associated with biotite granite, which probably is the dominant phase (14% of tin production). The granitoids of the Indonesian Tin Islands (193-251 Ma) do not permit grouping into geographically distinct units. Main Range-type and Eastern Province-type plutons occur next to each other. Most of the tin deposits are associated with Main Range-type plutons (28% of tin production). Tin-mineralized plutons are characterized by high concentrations of SiO 2, K 2O, Rb, Sn, Th and U, whereas the concentrations of Fe 2O 3, MgO, CaO, Na 2O, Ba and Sr as well as the Fe2O3/FeO ratios are low. Tin-mineralized plutons are also distinguished by high initial 87Sr/86Sr ratios low magnetic susceptibilities.

New paleomagnetic results from Upper Cretaceous arc-type rocks from the northern and southern branches of the Neotethys ocean in Anatolia

NASA Astrophysics Data System (ADS)

Cengiz Cinku, Mualla; Heller, Friedrich; Ustaömer, Timur

2017-10-01

A paleomagnetic study of Cretaceous arc type rocks in the Central-Eastern Pontides and in the Southeastern Taurides investigates the tectonic and paleolatitudinal evolution of three volcanic belts in Anatolia, namely the Northern and Southern Volcanic Belts in the Pontides and the SE Taurides volcanic belt. The paleomagnetic data indicate that magnetizations were acquired prior to folding at most sampling localities/sites, except for those in the Erzincan area in the Eastern Pontides. The Southern Volcanic Belt was magnetized at a paleolatitude between 23.8_{-3.8}^{+4.2}°N and 20.2_{-1.2}^{+1.3}°N. Hisarlı (J Geodyn 52:114-128, 2011) reported a more northerly paleolatitude (26.6_{-4.6}^{+5.1}°N) for the Northern Volcanic Belt. The comparison of the new paleomagnetic results with previous ones in Anatolia allows to conclude that the Southern Volcanic Belt in the Central-Eastern Pontides was emplaced after the Northern Volcanic Belt as a result of slab-roll back of the Northern Neotethys ocean in the Late Cretaceous. In the Southeast Taurides, Upper Cretaceous arc-related sandstones were at a paleolatitude of 16.8_{-3.8}^{+4.2} . The Late Cretaceous paleomagnetic rotations in the Central Pontides exhibit a counterclockwise rotation of R± Δ R=-37.1° ± 5.8° (Group 1; Çankırı, Yaylaçayı Formation) while Maastrichtian arc type rocks in the Yozgat area (Group 2) show clockwise rotations R + Δ R = 33.7° ± 8.4° and R + Δ R = 29.3° ± 6.0°. In the SE Taurides counterclockwise and clockwise rotations of R± Δ R=-48.6° ± 5.2° and R± Δ R=+34.1° ± 15.1° are obtained (Group 4; Elazığ Magmatic Complex). The Late Cretaceous paleomagnetic rotations in the Pontides follow a general trend in concordance with the shape of the suture zone after the collision between the Pontides and the Kırşehir block. The affect of the westwards excursion of the Anatolian plate and the associated fault bounded block rotations in Miocene are observed in the east of the study area and the SE Taurides.

Characteristics of pitch angle distributions of hundreds of keV electrons in the slot region and inner radiation belt

NASA Astrophysics Data System (ADS)

Zhao, H.; Li, X.; Blake, J. B.; Fennell, J. F.; Claudepierre, S. G.; Baker, D. N.; Jaynes, A. N.; Malaspina, D. M.

2014-12-01

The pitch angle distribution (PAD) of energetic electrons in the slot region and inner radiation belt received little attention in the past decades due to the lack of quality measurements. Using the state-of-the-art pitch angle-resolved data from the Magnetic Electron Ion Spectrometer instrument onboard the Van Allen Probes, a detailed analysis of hundreds of keV electron PADs below L = 4 is performed, in which the PADs are categorized into three types: normal (flux peaking at 90°), cap (exceedingly peaking narrowly around 90°), and 90° minimum (lower flux at 90°) PADs. By examining the characteristics of the PADs of ˜460 keV electrons for over a year, we find that the 90° minimum PADs are generally present in the inner belt (L<2), while normal PADs dominate at L˜3.5-4. In the region between, 90° minimum PADs dominate during injection times and normal PADs dominate during quiet times. Cap PADs appear mostly at the decay phase of storms in the slot region and are likely caused by the pitch angle scattering of hiss waves. Fitting the normal PADs into sinnα form, the parameter n is much higher below L = 3 than that in the outer belt and relatively constant in the inner belt but changes significantly in the slot region (2 < L < 3) during injection times. As for the 90° minimum PADs, by performing a detailed case study, we find in the slot region this type of PAD is likely caused by chorus wave heating, but this mechanism can hardly explain the formation of 90° minimum PADs at the center of inner belt.

Friction and wear behavior of aluminum and composite airplane skins

NASA Technical Reports Server (NTRS)

Jackson, K. E.

1984-01-01

Friction and wear behavior was determined for small skin specimens under abrasive loading conditions typical of those occurring on the underside of a transport airplane during emergency belly landing. A test apparatus consisting of a standard belt sander provided the sliding surface. Small test specimens constructed of aluminum, standard graphite-epoxy composite, aramid-epoxy composite, and toughened-resin composites were tested undar a range of pressures, belt velocities, and belt-surface textures. The effects of these test variables on the wear rate and the coefficient of friction are discussed and comparisons are made between the composite materials and aluminum. The effect of fiber orientation in the composite materials on wear rate was also investigated. In addition, tests were performed in which thermocouples were imbedded into the various test specimens to obtain temperature-time histories during abrasion.

Challenges to Progress in Studies of Climate-Tectonic-Erosion Interactions

NASA Astrophysics Data System (ADS)

Burbank, D. W.

2016-12-01

Attempts to unravel the relative importance of climate and tectonics in modulating topography and erosion should compare relevant data sets at comparable temporal and spatial scales. Given that such data are uncommonly available, how can we compare diverse data sets in a robust fashion? Many erosion-rate studies rely on detrital cosmogenic nuclides. What time scales can such data address, and what landscape conditions do they require to provide accurate representations of long-term erosion rates? To what extent do large-scale, but infrequent erosional events impact long-term rates? Commonly, long-term erosion rates are deduced from thermochronologic data. What types of data are needed to test for consistency of rates across a given interval or change in rates through time? Similarly, spatial and temporal variability in precipitation or tectonics requires averaging across appropriate scales. How are such data obtained in deforming mountain belts, and how do we assess their reliability? This study describes the character and temporal duration of key variables that are needed to examine climate-tectonic-erosion interactions, explores the strengths and weaknesses of several study areas, and suggests the types of data requirements that will underpin enlightening "tests" of hypotheses related to the mutual impacts of climate, tectonics, and erosion.

Management of symphysis pubis dysfunction during pregnancy using exercise and pelvic support belts.

PubMed

Depledge, Jill; McNair, Peter J; Keal-Smith, Cheryl; Williams, Maynard

2005-12-01

Symphysis pubis pain is a significant problem for some pregnant women. The purpose of this study was to investigate the effects of exercise, advice, and pelvic support belts on the management of symphysis pubis dysfunction during pregnancy. Ninety pregnant women with symphysis pubis dysfunction were randomly assigned to 3 treatment groups. A randomized masked prospective experimental clinical trial was conducted. Specific muscle strengthening exercises and advice concerning appropriate methods for performing activities of daily living were given to the 3 groups, and 2 of the groups were given either a rigid pelvic support belt or a nonrigid pelvic support belt. The dependent variables, which were measured before and after the intervention, were a Roland-Morris Questionnaire score, a Patient-Specific Functional Scale score, and a pain score (101-point numerical rating score). After the intervention, there was a significant reduction in the Roland-Morris Questionnaire score, the Patient-Specific Functional Scale score, and the average and worst pain scores in all groups. With the exception of average pain, there were no significant differences between groups for the other measures. The findings indicate that the use of either a rigid or a nonrigid pelvic support belt did not add to the effects provided by exercise and advice.

Design and testing of small scale fish meat bone separator useful for fish processing.

PubMed

Ali Muhammed, M; Manjunatha, N; Murthy, K Venkatesh; Bhaskar, N

2015-06-01

The present study relates to the food processing machinery and, more specifically machine for producing boneless comminuted meat from raw fish fillet. This machine is of belt and drum type meat bone separator designed for small scale fish processing in a continuous mode. The basic principal involved in this machine is compression force. The electric geared motor consists of 1HP and the conveyor belt has a linear velocity of 19 to 22 m min(-1), which was sufficient to debone the fish effectively. During the meat bone separation trials an efficiency up to 75 % on dressed fish weight basis was observed and with a capacity to separate 70 kg h(-1) of meat from fish at the machine speed of 25 rpm. During the trials, it was demonstrated that there was no significant change in the proximate composition of comminuted fish meat when compared to unprocessed fish meat. This design has a greater emphasis on hygiene, provision for cleaning-in-place (CIP) and gives cost effective need and reliability for small scale industries to produce fish meat in turn used for their value added products.

THE ASTEROID BELT AS A RELIC FROM A CHAOTIC EARLY SOLAR SYSTEM

DOE Office of Scientific and Technical Information (OSTI.GOV)

Izidoro, André; Raymond, Sean N.; Pierens, Arnaud

The orbital structure of the asteroid belt holds a record of the solar system’s dynamical history. The current belt only contains ∼10{sup −3} Earth masses yet the asteroids’ orbits are dynamically excited, with a large spread in eccentricity and inclination. In the context of models of terrestrial planet formation, the belt may have been excited by Jupiter’s orbital migration. The terrestrial planets can also be reproduced without invoking a migrating Jupiter; however, as it requires a severe mass deficit beyond Earth’s orbit, this model systematically under-excites the asteroid belt. Here we show that the orbits of the asteroids may havemore » been excited to their current state if Jupiter’s and Saturn’s early orbits were chaotic. Stochastic variations in the gas giants’ orbits cause resonances to continually jump across the main belt and excite the asteroids’ orbits on a timescale of tens of millions of years. While hydrodynamical simulations show that the gas giants were likely in mean motion resonance at the end of the gaseous disk phase, small perturbations could have driven them into a chaotic but stable state. The gas giants’ current orbits were achieved later, during an instability in the outer solar system. Although it is well known that the present-day solar system exhibits chaotic behavior, our results suggest that the early solar system may also have been chaotic.« less

A cost benefit analysis of an enhanced seat belt enforcement program in South Africa.

PubMed

Harris, G T; Olukoga, I A

2005-04-01

To examine whether a program to increase the wearing of seat belts in a South African urban area would be worthwhile in societal terms. A cost benefit analysis of a one year enhanced seat belt enforcement program in eThekwini (Durban) Municipality. Data were drawn from two main sources--a 1998 study of the cost of road crashes in South Africa and, given the absence of other data, a meta-analysis of the effectiveness of various types of interventions to reduce road crash casualties in the United States--and were analyzed using cost benefit analysis. A program designed to enforce greater wearing of seat belts, estimated to cost 2 million rand in one year, could be reasonably expected to increase seat belt usage rates by 16 percentage points and reduce fatalities and injuries by 9.5%. This would result in saved social costs of 13.6 million rand in the following year or a net present value of 11.6 million rand. There would also be favorable consequences for municipal finances. Investment in a program to increase seat belt wearing rates is highly profitable in societal terms.

Improving the use of environmental diversity as a surrogate for species representation.

PubMed

Albuquerque, Fabio; Beier, Paul

2018-01-01

The continuous p-median approach to environmental diversity (ED) is a reliable way to identify sites that efficiently represent species. A recently developed maximum dispersion (maxdisp) approach to ED is computationally simpler, does not require the user to reduce environmental space to two dimensions, and performed better than continuous p-median for datasets of South African animals. We tested whether maxdisp performs as well as continuous p-median for 12 datasets that included plants and other continents, and whether particular types of environmental variables produced consistently better models of ED. We selected 12 species inventories and atlases to span a broad range of taxa (plants, birds, mammals, reptiles, and amphibians), spatial extents, and resolutions. For each dataset, we used continuous p-median ED and maxdisp ED in combination with five sets of environmental variables (five combinations of temperature, precipitation, insolation, NDVI, and topographic variables) to select environmentally diverse sites. We used the species accumulation index (SAI) to evaluate the efficiency of ED in representing species for each approach and set of environmental variables. Maxdisp ED represented species better than continuous p-median ED in five of 12 biodiversity datasets, and about the same for the other seven biodiversity datasets. Efficiency of ED also varied with type of variables used to define environmental space, but no particular combination of variables consistently performed best. We conclude that maxdisp ED performs at least as well as continuous p-median ED, and has the advantage of faster and simpler computation. Surprisingly, using all 38 environmental variables was not consistently better than using subsets of variables, nor did any subset emerge as consistently best or worst; further work is needed to identify the best variables to define environmental space. Results can help ecologists and conservationists select sites for species representation and assist in conservation planning.

Signatures of Pacific-type orogeny in Lleyn and Anglesey areas, northwest Wales

NASA Astrophysics Data System (ADS)

Asanuma, H.; Okada, Y.; Sawaki, Y.; Yamamoto, S.; Hirata, T.; Maruyama, S.

2014-12-01

The orogeny is a fundamental process of plate tectonics, and its record is useful for understanding of ancient plate motion. Geotectonic history of British isles has been explained by collision-type orogeny accompanied by closure of Iapetus ocean. High pressure metamorphic rocks such as blueschist and eclogite characterizing Pacific-type orogeny occur in some places, but have not attracted much interests because of their smallness. The subduction-related (Pacific-type) orogeny is characterized by contemporaneous formation of a batholith belt, a regional metamorphic belt (high P/T type) and an accretionary complex. Late Proterozoic-Cambrian (677-498 Ma) calc-alkaline volcano-plutonic complexes crop out in Lleyn and Anglesey areas, northwest Wales. The metamorphic age of high-P/T metamorphic belt in eastern Anglesey was constrained by Ar-Ar isochron age of 560-550 Ma. However, depositional age of the rocks composing accretionary complex wasn't fully constrained due to the limited zircon U-Pb age data and vague microfossil records. Monian Supergroup at Lleyn and Anglesey areas includes three groups; South Stack Group (Gp), New Harbour Gp and Gwna Gp. The Gwna Gp is located at the structural top and includes typical rocks of an ocean plate stratigraphy (OPS), a fundamental unit composing of an accretionary complex. We described detailed geological map and reconstructed the OPSs at some localities with careful attention to layer-parallel thrust. In order to constrain the sedimentary ages of each OPS, we collected sandstones from individual OPSs. We determined U-Pb ages of detrital zircons from the sandstones with LA-ICP-MS at Kyoto University. We adopted the youngest age of the detrital zircons as a constraint of sedimentary age. The results indicate that sediments in Gwna Gp deposited from 623 ± 17 Ma to 535 ± 14 Ma. These are contemporary with the ages of both batholith belt and regional metamorphic belt. In addition, it became evident that structurally upper level is older than lower level. This structurally downward-younging polarity is one of the characteristics of accretionary complex. Therefore, we concluded that the accretionary complex at northwestern Wales was formed between 623 ± 17 Ma and 535 ± 14 Ma, and the subduction-related Pacific-type orogeny had formed a part of British Isles.

Compositional Grading in an Impact-produced Spherule Bed, Barberton Greenstone Belt, South Africa: A Key to Condensation History of Rock Vapor Clouds

NASA Technical Reports Server (NTRS)

Krull, A. E.; Lowe, D. R.; Byerly, G. R.

2003-01-01

The chemical and physical processes by which spherules form during the condensation of impact-produced rock vapor clouds are poorly understood. Although efforts have been made to model the processes of spherule formation, there is presently a paucity of field data to constrain the resulting theoretical models. The present study examines the vertical compositional variability in a single early Archean spherule bed in the Barberton Greenstone Belt (BGB), South Africa, in order to better identify the process by which impact vapor clouds condense and spherules form and accumulate. The BGB spherule beds are suitable for this type of study because of their great thickness, often exceeding 25cm of pure spherules, due to the massive sizes of the impactors. Two main problems complicate analysis of vertical compositional variability of graded spherule beds: (1) differential settling of particles in both the vapor and water column due to density and size differences and (2) turbulence within the vapor cloud. The present study compares sections of spherule bed S3 from four different depositional environments in the Barberton Greenstone Belt: (1) The Sheba Mine section (SAF-381) was deposited under fairly low energy conditions in deep water, providing a nice fallout sequence, and also has abundant Ni-rich spinels; (2) Jay's Chert section (SAF-380) was deposited in subaerial to shallow-water conditions with extensive post-depositional reworking by currents. The spherules also have preserved spinels; (3) the Loop Road section (loc. SAF-295; samp. KSA-7) was moderately reworked and has only rare preservation of spinels; and (4) the shallow-water Barite Syncline section (loc. SAF-206; samp KSA-1) has few to no spinels preserved and is not reworked. Although all of the spherule beds have been altered by silica diagenesis and K-metasomatism, most of the compositional differences between these sections appear to reflect their diagenetic histories, possibly related to their differing depositional environments. Sulfate diagenesis in the Barite Syncline and Loop road sections may account for the loss of spinels.

The Archaen volcanic facies in the Migori segment, Nyanza greenstone belt, Kenya: stratigraphy, geochemistry and mineralisation

NASA Astrophysics Data System (ADS)

Ichang'l, D. W.; MacLean, W. H.

The Migori segment is an 80 by 20 km portion of the Nyanza greenstone belt which forms the northern part of the Archean Tanzanian Craton in western Kenya, northern Tanzania and southeastern Uganda. It consists of two volcanic centres, each with central, proximal and distal volcanic facies, comprising the Migori Group, the Macalder and Lolgorien Subgroups, and eleven volcano-sedimentary formations. The centres are separated by a basin of tuffs and greywacke turbidites. The volcanics are bimodal mafic basalt and dolerite ( Zr/Y = 3.8 - 6.5, La N/Yb N = 1.0 - 2.4) , and felsic calc-alkaline dacite-rhyolite ( Zr/Y = 10 - 21, La N/Yb N = 19 - 42 ) and high-K dacite ( Zr/Y = 9 - 16, La N/Yb N = 21 - 22 ). Felsic units form approximately three-fourths of the volcanic stratigraphy. Basalts, calc-alkaline dacites and rhyolites were deposited in a submarine environment, but the voluminous high-K dacites were erupted subaerially. The turbidites contain units of iron-formations. Granitic intrusions are chemically continuous with the high-K dacites. The felsic volcanics are anologous to those found at modern volcanic arc subduction settings involving continental crust. The Macalder ZnCuAuAg volcanogenic massive sulphide deposits is in central facies basalts-greywacke-rhyolite. Gold mineralisation occurs in proximal facies tuffs and iron formation, and in oblique and semi-conformable quartz veins. Greenstones in the Nyanza belt are dominated by calc-alkaline felsic volcanics in constrast to the komatiite-tholeiitic basalt volcanism in the Kaapvaal Craton of South Africa, and a mixture of the two types in the Zimbabwe Craton.

Intermediate P/T-type regional metamorphism of the Isua Supracrustal Belt, southern west Greenland: The oldest Pacific-type orogenic belt?

NASA Astrophysics Data System (ADS)

Arai, Tatsuyuki; Omori, Soichi; Komiya, Tsuyoshi; Maruyama, Shigenori

2015-11-01

The 3.7-3.8 Ga Isua Supracrustal Belt (ISB), southwest Greenland, might be the oldest accretionary complex on Earth. Regional metamorphism of the ISB has a potential to constrain the tectonothermal history of the Earth during the Eoarchean. Chemical and modal analyses of metabasite in the study area (i.e., the northeast part of the ISB) show that the metamorphic grade increases from greenschist facies in the northern part of the study area to amphibolite facies in the southern part. To determine the precise metamorphic P-T ranges, isochemical phase diagrams of minerals of metabasite were made using Perple_X. A synthesis of the estimated metamorphic P-T ranges of the ISB indicates that both the metamorphic pressure and temperature increase systematically to the south in the study area from 3 kbar and 380 °C to 6 kbar and 560 °C. The monotonous metamorphic P-T change suggests that the northeast part of the ISB preserves regional metamorphism resulting from the subduction of an accretionary complex although the ISB experienced metamorphic overprints during the Neoarchean. Both the presence of the regional metamorphism and an accretionary complex having originating at subduction zone suggest that the ISB may be the oldest Pacific-type orogenic belt. The progressive metamorphism can be considered as a record of intermediate-P/T type geothermal gradient at the subduction zone in the Eoarchean. Intermediate-P/T type geothermal gradient is typical at the current zones of subducting young oceanic crust, such as in the case of the Philippine Sea Plate in the southwest part of Japan. Considering the fact that almost all metamorphisms in the Archean are greenschist-amphibolite facies, the intermediate-P/T type geothermal gradient at the ISB might have been worldwide in the Archean. This would indicate that the subduction of young micro-plates was common because of the vigorous convection of hot mantle in the Archean.

STIS CORONAGRAPHIC IMAGING OF FOMALHAUT: MAIN BELT STRUCTURE AND THE ORBIT OF FOMALHAUT b

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalas, Paul; Graham, James R.; Fitzgerald, Michael P.

2013-09-20

We present new optical coronagraphic data of Fomalhaut obtained with HST/STIS in 2010 and 2012. Fomalhaut b is recovered at both epochs to high significance. The observations include the discoveries of tenuous nebulosity beyond the main dust belt detected to at least 209 AU projected radius, and a ∼50 AU wide azimuthal gap in the belt northward of Fomalhaut b. The two epochs of Space Telescope Imaging Spectrograph (STIS) photometry exclude optical variability greater than 35%. A Markov chain Monte Carlo analysis demonstrates that the orbit of Fomalhaut b is highly eccentric, with e = 0.8 ± 0.1, a =more » 177 ± 68 AU, and q = 32 ± 24 AU. Fomalhaut b is apsidally aligned with the belt and 90% of allowed orbits have mutual inclination ≤36°. Fomalhaut b's orbit is belt crossing in the sky plane projection, but only 12% of possible orbits have ascending or descending nodes within a 25 AU wide belt annulus. The high eccentricity invokes a dynamical history where Fomalhaut b may have experienced a significant dynamical interaction with a hypothetical planet Fomalhaut c, and the current orbital configuration may be relatively short-lived. The Tisserand parameter with respect to a hypothetical Fomalhaut planet at 30 AU or 120 AU lies in the range 2-3, similar to highly eccentric dwarf planets in our solar system. We argue that Fomalhaut b's minimum mass is that of a dwarf planet in order for a circumplanetary satellite system to remain bound to a sufficient radius from the planet to be consistent with the dust scattered light hypothesis. In the coplanar case, Fomalhaut b will collide with the main belt around 2032, and the subsequent emergent phenomena may help determine its physical nature.« less

STIS Coronagraphic Imaging of Fomalhaut: Main Belt Structure and the Orbit of Fomalhaut b

NASA Technical Reports Server (NTRS)

Kalas, Paul; Graham, James R.; Fitzgerald, Michael P.; Clampin, Mark

2013-01-01

We present new optical coronagraphic data of Fomalhaut obtained with HST/STIS in 2010 and 2012. Fomalhaut b is recovered at both epochs to high significance. The observations include the discoveries of tenuous nebulosity beyond the main dust belt detected to at least 209AU projected radius, and a approx. 50AU wide azimuthal gap in the belt northward of Fomalhaut b. The two epochs of Space Telescope Imaging Spectrograph (STIS) photometry exclude optical variability greater than 35%. A Markov chain Monte Carlo analysis demonstrates that the orbit of Fomalhaut b is highly eccentric, with e = 0.8 +/- 0.1, a = 177 +/- 68AU, and q = 32 +/- 24AU. Fomalhaut b is apsidally aligned with the belt and 90% of allowed orbits have mutual inclination <=36 deg. Fomalhaut b's orbit is belt crossing in the sky plane projection, but only 12% of possible orbits have ascending or descending nodes within a 25AU wide belt annulus. The high eccentricity invokes a dynamical history where Fomalhaut b may have experienced a significant dynamical interaction with a hypothetical planet Fomalhaut c, and the current orbital configuration may be relatively short-lived. The Tisserand parameter with respect to a hypothetical Fomalhaut planet at 30AU or 120AU lies in the range 2-3, similar to highly eccentric dwarf planets in our solar system. We argue that Fomalhaut b's minimum mass is that of a dwarf planet in order for a circumplanetary satellite system to remain bound to a sufficient radius from the planet to be consistent with the dust scattered light hypothesis. In the coplanar case, Fomalhaut b will collide with the main belt around 2032, and the subsequent emergent phenomena may help determine its physical nature.

Hot spot abundance, ridge subduction and the evolution of greenstone belts

NASA Technical Reports Server (NTRS)

Abbott, D.; Hoffman, S.

1986-01-01

A number of plate tectonic hypotheses have been proposed to explain the origin of Archaean and Phanerozoic greenstone/ophiolite terranes. In these models, ophiolites or greenstone belts represent the remnants of one or more of the following: island arcs, rifted continental margins, oceanic crustal sections, and hot spot volcanic products. If plate tectonics has been active since the creation of the Earth, it is logical to suppose that the same types of tectonic processes which form present day ophiolites also formed Archaean greenstone belts. However, the relative importance of the various tectonic processes may well have been different and are discussed.

The Mesozoic palaeo-relief and immature front belt of northern Tianshan

NASA Astrophysics Data System (ADS)

Chen, K.; Gumiaux, C.; Augier, R.; Chen, Y.; Wang, Q.

2012-04-01

The modern Tianshan (central Asia) extends east-west on about 2500 km long with an average of more than 2000 m in altitude. At first order, the finite structure of this range obviously displays a crust-scale 'pop-up' of Palaeozoic rocks surrounded by two Cenozoic foreland basins. Up to now, this range is regarded as a direct consequence of the Neogene to recent reactivation of a Palaeozoic belt due to the India - Asia collision. This study focuses on the structure of the northern front area of Tianshan and is mainly based on field structural works. In particular, relationships in between sedimentary cover and basement units allow discussing the tectonic and morphological evolution of the northern Tianshan during Mesozoic and Cenozoic times. The study area is about 250 km long, from Wusu to Urumqi, along the northern piedmont of the Tianshan. Continental sedimentary series of the basin as well as structure of the cover/basement interface can well be observed along several incised valleys. Sedimentological observations argue for a limited transport distance for Lower and Uppermost Jurassic deposits that are preserved within intra-mountainous basins or within the foreland basin, along the range front. Moreover, some of the studied geological sections show that Triassic to Jurassic sedimentary series can be continuously followed from the basin to the range where they unconformably overlie the Carboniferous basement. Such onlap type structures of the Jurassic series, on top of the Palaeozoic rock units, can also be observed at more local-scale (~a few 100 m). At different scales, our observations thus clearly evidence i) the existence of a substantial relief during Mesozoic times and ii) very limited deformation, after Mesozoic, along some segments of the northern range front. Yet, thrusting of the Palaeozoic basement on the Mesozoic or Cenozoic sedimentary series of the basin is also well exposed along some other river valleys. As a consequence, the northern front of Tianshan displays as very uncylindrical with rapid lateral transitions from one type to the other. This study shows that the Cenozoic reactivation of the Tianshan range has not yielded important deformation along its contact with the juxtaposed Junggar basin, into the studied segment. Besides, the topography of the current northern Tianshan area can not be considered as the unique consequence of Cenozoic reactivation. Finally, from a compilation of structural field observations with available seismic geophysical data, regional cross sections show only moderate shortening in the deformed belt of the northern piedmont of Tianshan. Structure of the fold-and-thrust belt looks controlled by several basement thrusts faults separating rigid blocks. This study suggests that the northern front of the intra-continental Tianshan range may be considered as an immature thrust belt and is still at an early developing stage of its orogenic evolution.

The morphology of the ridge belts on Venus

NASA Astrophysics Data System (ADS)

Kriuchkov, V. P.

1990-06-01

The length and spacing of linear features were measured for ridge and groove belts, for the outer mountain zones of the Lakshmi planum, and for the outer ridge zones of coronal structures. The distributions of these parameters show small but significant differences in most of the cases. The ridges are assumed to result from deformations. Deformed-layer thickness were estimated for various types of linear subdivisions.

49 CFR 579.22 - Reporting requirements for manufacturers of 100 or more buses, manufacturers of 500 or more...

Code of Federal Regulations, 2014 CFR

2014-10-01

... train, 11 electrical, 12 exterior lighting, 13 visibility, 14 air bags, 15 seat belts, 16 structure, 17... visibility, 14 air bags, 15 seat belts, 16 structure, 17 latch, 18 vehicle speed control, 19 tires, 20 wheels... manufactured and available with more than one type of service brake system (i.e., hydraulic or air), the...

Pliocene-Pleistocene changes in Arctic sea-ice cover: New biomarker records from Fram Strait/Yermak Plateau (ODP Sites 911 and 912)

NASA Astrophysics Data System (ADS)

Stein, Ruediger; Fahl, Kirsten

2013-04-01

Recently, a novel and promising biomarker proxy for reconstruction of Arctic sea-ice conditions was developed and is based on the determination of a highly branched isoprenoid with 25 carbons (IP25; Belt et al., 2007). Following this pioneer IP25 study by Belt and colleagues, several IP25 studies of marine surface sediments and sediment cores as well as sediment trap samples from northpolar areas were carried out successfully and allowed detailed reconstruction of modern and late Quaternary sea ice variability in these regions (e.g., Massé et al., 2008; Müller et al., 2009, 2011; Vare et al., 2009; Belt et al., 2010; Fahl and Stein, 2012; for review see Stein et al., 2012). Here, we present new (low-resolution) biomarker records from Ocean Drilling Program (ODP) Sites 911 and 912, representing the Pliocene-Pleistocene time interval (including the interval of major intensification of Northern Hemisphere Glaciation near 2.7 Ma). These data indicate that sea ice of variable extent was present in the Fram Strait/southern Yermak Plateau area during most of the time period under investigation. In general, an increase in sea-ice cover seems to correlate with phases of extended late Pliocene-Pleistocene continental ice-sheets. At ODP Site 912, a significant increase in sea-ice extension occurred near 1.2 Ma (Stein and Fahl, 2012). Furthermore, our data support the idea that a combination of IP25 and open water, phytoplankton biomarker data ("PIP25 index"; Müller et al., 2011) may give more reliable and quantitative estimates of past sea-ice cover (at least for the study area). This study reveals that the novel IP25/PIP25 biomarker approach has potential for semi-quantitative paleo-sea ice studies covering the entire Quaternary and motivate to carry out further detailed high-resolution research on ODP/IODP material using this proxy. References Belt, S.T., Massé, G., Rowland, S.J., Poulin, M., Michel, C., LeBlanc, B., 2007. A novel chemical fossil of palaeo sea ice: IP25. Organic Geochemistry 38, 16-27. Belt, S.T., Vare, L.L., Massé, G., Manners, H.R., Price, J.C., MacLachlan, S.E., Andrews, J.T., Schmidt, S., 2010. Striking similarities in temporal changes to spring sea ice occurrence across the central Canadian Arctic Archipelago over the last 7000 years. Quaternary Science Reviews 29, 3489-3504. Fahl, K. and Stein, R., 2012. Modern seasonal variability and deglacial/Holocene change of central Arctic Ocean sea-ice cover: New insights from biomarker proxy records. Earth Planetary Science Letters 351-352C, 123-133, doi:10.1016/j.epsl.2012.07.009. Massé, G., Rowland, S.J., Sicre, M.-A., Jacob, J., Jansen, E., Belt, S.T., 2008. Abrupt climate changes for Iceland during the last millennium: Evidence from high resolution sea ice reconstructions. Earth Planetary Science Letters 269, 565-569. Müller, J., Massé, G., Stein, R., Belt, S.T., 2009. Variability of sea-ice conditions in the Fram Strait over the past 30,000 years. Nature Geoscience 2, 772-776. Müller, J., Wagner, A., Fahl, K., Stein, R., Prange, M., Lohmann, G., 2011. Towards quantitative sea ice reconstructions in the northern North Atlantic: A combined biomarker and numerical modelling approach. Earth Planetary Science Letters 306, 137-148. Stein, R. and Fahl, K., 2012. Biomarker proxy IP25 shows potential for studying entire Quaternary Arctic sea-ice history. Organic Geochemistry; doi: 10.1016/j.orggeochem.2012.11.005. Stein, R., Fahl, K., and Müller, J., 2012. Proxy reconstruction of Arctic Ocean sea ice history: "From IRD to IP25". Polarforschung 82, 37-71. Vare, L.L., Massé, G., Gregory, T.R., Smart, C.W., Belt, S.T., 2009. Sea ice variations in the central Canadian Arctic Archipelago during the Holocene. Quaternary Science Reviews 28, 1354-1366.

A Herschel resolved far-infrared dust ring around HD 207129

NASA Astrophysics Data System (ADS)

Marshall, J. P.; Löhne, T.; Montesinos, B.; Krivov, A. V.; Eiroa, C.; Absil, O.; Bryden, G.; Maldonado, J.; Mora, A.; Sanz-Forcada, J.; Ardila, D.; Augereau, J.-Ch.; Bayo, A.; Del Burgo, C.; Danchi, W.; Ertel, S.; Fedele, D.; Fridlund, M.; Lebreton, J.; González-García, B. M.; Liseau, R.; Meeus, G.; Müller, S.; Pilbratt, G. L.; Roberge, A.; Stapelfeldt, K.; Thébault, P.; White, G. J.; Wolf, S.

2011-05-01

Context. Dusty debris discs around main sequence stars are thought to be the result of continuous collisional grinding of planetesimals in the system. The majority of these systems are unresolved and analysis of the dust properties is limited by the lack of information regarding the dust location. Aims: The Herschel DUNES key program is observing 133 nearby, Sun-like stars (<20 pc, FGK spectral type) in a volume limited survey to constrain the absolute incidence of cold dust around these stars by detection of far infrared excess emission at flux levels comparable to the Edgeworth-Kuiper belt (EKB). Methods: We have observed the Sun-like star HD 207129 with Herschel PACS and SPIRE. In all three PACS bands we resolve a ring-like structure consistent with scattered light observations. Using α Boötis as a reference point spread function (PSF), we deconvolved the images, clearly resolving the inner gap in the disc at both 70 and 100 μm. Results: We have resolved the dust-producing planetesimal belt of a debris disc at 100 μm for the first time. We measure the radial profile and fractional luminosity of the disc, and compare the values to those of discs around stars of similar age and/or spectral type, placing this disc in context of other resolved discs observed by Herschel/DUNES. Herschel is an ESA space observatory with science instruments provided by European-led Principal Investigator consortia and with important participation from NASA.

Finite element simulation and experimental verification of steel cord extraction of steel cord conveyor belt splice

NASA Astrophysics Data System (ADS)

Li, X. G.; Long, X. Y.; Jiang, H. Q.; Long, H. B.

2018-05-01

The splice is the weakest part of the entire steel cord conveyor belt. And it occurs steel cord twitch fault frequently. If this fault cannot be dealt with timely and accurately, broken belt accidents would be occurred that affecting the safety of production seriously. In this paper, we investigate the steel cord pullout of the steel cord conveyor belt splice by using ABAQUS software. We selected the strength of steel cord conveyor belt ST630, the same as experiment sample in type specification. The finite element model consists of rubber, steel cord and failure unit. And the failure unit is used to simulate the bonding relationship between the steel cord and the rubber. Mooney-Rivlin hyper-elastic model for rubber was employed in the numerical simulations. The pullout force of length 50.0 mm single steel cord, on both sides of a single steel cord and on both sides of the double steel cords each impacted at steel cord conveyor belt splice were numerically computer and typical results obtained have been validated by experimental result. It shows that the relative error between simulation results and experimental results is within 10% and can be considered that the simulation model is reliable. A new method is provided for studying the steel cord twitch fault of the steel cord conveyor belt splice.

Variable threshold method for ECG R-peak detection.

PubMed

Kew, Hsein-Ping; Jeong, Do-Un

2011-10-01

In this paper, a wearable belt-type ECG electrode worn around the chest by measuring the real-time ECG is produced in order to minimize the inconvenient in wearing. ECG signal is detected using a potential instrument system. The measured ECG signal is transmits via an ultra low power consumption wireless data communications unit to personal computer using Zigbee-compatible wireless sensor node. ECG signals carry a lot of clinical information for a cardiologist especially the R-peak detection in ECG. R-peak detection generally uses the threshold value which is fixed. There will be errors in peak detection when the baseline changes due to motion artifacts and signal size changes. Preprocessing process which includes differentiation process and Hilbert transform is used as signal preprocessing algorithm. Thereafter, variable threshold method is used to detect the R-peak which is more accurate and efficient than fixed threshold value method. R-peak detection using MIT-BIH databases and Long Term Real-Time ECG is performed in this research in order to evaluate the performance analysis.

The Fossilized Size Distribution of the Main Asteroid Belt

NASA Astrophysics Data System (ADS)

Bottke, W. F.; Durda, D.; Nesvorny, D.; Jedicke, R.; Morbidelli, A.

2003-05-01

At present, we do not understand how the main asteroid belt evolved into its current state. During the planet formation epoch, the primordial main belt (PMB) contained several Earth masses of material, enough to allow the asteroids to accrete on relatively short timescales (e.g., Weidenschilling 1977). The present-day main belt, however, only contains 5e-4 Earth masses of material (Petit et al. 2002). Constraints on this evolution come from (i) the observed fragments of differentiated asteroids, (ii) meteorites collected from numerous differentiated parent bodies, (iii) the presence of ˜ 10 prominent asteroid families, (iv) the "wavy" size-frequency distribution of the main belt, which has been shown to be a by-product of substantial collisional evolution (e.g., Durda et al. 1997), and (v) the still-intact crust of (4) Vesta. To explain the contradictions in the above constraints, we suggest the PMB evolved in this fashion: Planetesimals and planetary embryos accreted (and differentiated) in the PMB during the first few Myr of the solar system. Gravitational perturbations from these embryos dynamically stirred the main belt, enough to initiate fragmentation. When Jupiter reached its full size, some 10 Myr after the solar system's birth, its perturbations, together with those of the embryos, dynamically depleted the main belt region of ˜ 99% of its bodies. Much of this material was sent to high (e,i) orbits, where it continued to pummel the surviving main belt bodies at high impact velocities for more than 100 Myr. While some differentiated bodies in the PMB were disrupted, most were instead scattered; only small fragments from this population remain. This period of comminution and dynamical evolution in the PMB created, among other things, the main belt's wavy size distribution, such that it can be considered a "fossil" from this violent early epoch. From this time forward, however, relatively little collisional evolution has taken place in the main belt, consistent with the surprising paucity of prominent asteroid families. Preliminary modeling results of this scenario and implications will be presented.

New features in the structure of the classical Kuiper Belt

NASA Astrophysics Data System (ADS)

Gladman, Brett; Bannister, Michele T.; Alexandersen, Mike; Chen, Ying-Tung; Gwyn, Stephen; Kavelaars, J. J.; Petit, Jean-Marc; Volk, Kathryn; OSSOS Collaboration

2016-10-01

We report fascinating new dynamical structures emerging from a higher precision view of the classical Kuiper belt (the plentiful non-resonant orbits with semimajor axes in roughly the a=35-60 au range). The classical Kuiper Belt divides into multiple sub-populations: an 'inner' classical belt (a small group of non-resonant objects with a<39.4 au where the 3:2 resonance is located), an abundant 'main' classical belt (between the 3:2 and the 2:1 at a=47.4 au), and a difficult to study outer classical belt beyond the 2:1. We examine the dynamical structure, as precisely revealed in the detections from OSSOS (the Outer Solar System Origin's Survey); the data set is of superb quality in terms of orbital element and numbers of detections (Kavelaars et al, this meeting).The previous CFEPS survey showed that the main classical belt requires a complex dynamical substructure that goes beyond a simple 'hot versus cold' division based primarily on orbital inclination; the 'cold' inclination component requires two sub-components in the semimajor axis and perihelion distance q space (Petit et al 2011). CFEPS modelled this as a 'stirred' component present at all a=40-47 AU semimajor axes, with a dense superposed 'kernel' near a=44 AU at low eccentricity; the first OSSOS data release remained consistent with this (Bannister et al 2016). As with the main asteroid belt, as statistics and orbital quality improve we see additional significant substructure emerging in the classical belt's orbital distribution.OSSOS continues to add evidence that the cold stirred component extends smoothly beyond the 2:1 (Bannister et al 2016). Unexpectedly, the data also reveal the clear existence of a paucity of orbits just beyond the outer edge of the kernel; there are significantly fewer TNOs in the narrow semimajor axis band from a=44.5-45.0 AU. This may be related to the kernel population's creation, or it may be an independent feature created by planet migration as resonances moved in the primordial Kuiper Belt.

Patrick Moore's Data Book of Astronomy

NASA Astrophysics Data System (ADS)

Moore, Patrick; Rees, Robin

2014-01-01

1. The Solar System; 2. The Sun; 3. The Moon; 4. Mercury; 5. Venus; 6. Earth; 7. Mars; 8. The asteroid belt; 9. Jupiter; 10. Saturn; 11. Uranus; 12. Neptune; 13. Beyond Neptune: the Kuiper Belt; 14. Comets; 15. Meteors; 16. Meteorites; 17. Glows and atmospheric effects; 18. The stars; 19. Stellar spectra and evolution; 20. Extrasolar planets; 21. Double stars; 22. Variable stars; 23. Stellar clusters; 24. Nebulae; 25. The Galaxy; 26. The evolution of the Universe; 27. The constellations; 28. The star catalogue; 29. Telescopes and observatories; 30. Non-optical astronomy; 31. The history of astronomy; 32. Astronomers; 33. Glossary; Index.

Machine Monitor

NASA Technical Reports Server (NTRS)

1994-01-01

When a printing press jams, damage is extensive, repairs are costly, and time and production loss can be expensive. James River Corporation requested G.W. Shelton, a design engineer with Logical Control Systems to solve this problem. Shelton found the solution in a NASA Tech Brief article describing a system of pulley and belt drives. This led to the design of a system that monitors drive components for changes in relative speed that would indicate belt slippage and jam probability. When a combination of variables is not met, an emergency "stop" signal is sent to the press and an alarm is triggered.

An Evaluation of the Euroncap Crash Test Safety Ratings in the Real World

PubMed Central

Segui-Gomez, Maria; Lopez-Valdes, Francisco J.; Frampton, Richard

2007-01-01

We investigated whether the rating obtained in the EuroNCAP test procedures correlates with injury protection to vehicle occupants in real crashes using data in the UK Cooperative Crash Injury Study (CCIS) database from 1996 to 2005. Multivariate Poisson regression models were developed, using the Abbreviated Injury Scale (AIS) score by body region as the dependent variable and the EuroNCAP score for that particular body region, seat belt use, mass ratio and Equivalent Test Speed (ETS) as independent variables. Our models identified statistically significant relationships between injury severity and safety belt use, mass ratio and ETS. We could not identify any statistically significant relationships between the EuroNCAP body region scores and real injury outcome except for the protection to pelvis-femur-knee in frontal impacts where scoring “green” is significantly better than scoring “yellow” or “red”.

Corn and soybean Landsat MSS classification performance as a function of scene characteristics

NASA Technical Reports Server (NTRS)

Batista, G. T.; Hixson, M. M.; Bauer, M. E.

1982-01-01

In order to fully utilize remote sensing to inventory crop production, it is important to identify the factors that affect the accuracy of Landsat classifications. The objective of this study was to investigate the effect of scene characteristics involving crop, soil, and weather variables on the accuracy of Landsat classifications of corn and soybeans. Segments sampling the U.S. Corn Belt were classified using a Gaussian maximum likelihood classifier on multitemporally registered data from two key acquisition periods. Field size had a strong effect on classification accuracy with small fields tending to have low accuracies even when the effect of mixed pixels was eliminated. Other scene characteristics accounting for variability in classification accuracy included proportions of corn and soybeans, crop diversity index, proportion of all field crops, soil drainage, slope, soil order, long-term average soybean yield, maximum yield, relative position of the segment in the Corn Belt, weather, and crop development stage.

Nezara viridula (L.) in Central Texas: I. New host plant associations and reproductive status of adults encountered within

USDA-ARS?s Scientific Manuscript database

Nezara viridula (L.) and other phytophagous stink bug species continue to plague producers in Texas and the remainder of the Cotton Belt. Developing effective management tactics for Nezara viridula (L.) requires a thorough understanding of factors contributing to continued production of field pest ...

Mercury from mineral deposits and potential environmental impact

USGS Publications Warehouse

Rytuba, J.J.

2003-01-01

Mercury deposits are globally distributed in 26 mercury mineral belts. Three types of mercury deposits occur in these belts: silica-carbonate, hot-spring, and Almaden. Mercury is also produced as a by-product from several types of gold-silver and massive sulfide deposits, which account for 5% of the world's production. Other types of mineral deposits can be enriched in mercury and mercury phases present are dependent on deposit type. During processing of mercury ores, secondary mercury phases form and accumulate in mine wastes. These phases are more soluble than cinnabar, the primary ore mineral, and cause mercury deposits to impact the environment more so than other types of ore deposits enriched in mercury. Release and transport of mercury from mine wastes occur primarily as mercury-enriched particles and colloids. Production from mercury deposits has decreased because of environmental concerns, but by-product production from other mercury-enriched mineral deposits remains important.

Rural and Urban Differences in Passenger-Vehicle–Occupant Deaths and Seat Belt Use Among Adults — United States, 2014

PubMed Central

Downs, Jonathan; Stevens, Mark R.; Sauber-Schatz, Erin K.

2017-01-01

Problem/Condition Motor-vehicle crashes are a leading cause of death in the United States. Compared with urban residents, rural residents are at an increased risk for death from crashes and are less likely to wear seat belts. These differences have not been well described by levels of rurality. Reporting Period 2014. Description of Systems Data from the Fatality Analysis Reporting System (FARS) and the Behavioral Risk Factor Surveillance System (BRFSS) were used to identify passenger-vehicle–occupant deaths from motor-vehicle crashes and estimate the prevalence of seat belt use. FARS, a census of U.S. motor-vehicle crashes involving one or more deaths, was used to identify passenger-vehicle–occupant deaths among adults aged ≥18 years. Passenger-vehicle occupants were defined as persons driving or riding in passenger cars, light trucks, vans, or sport utility vehicles. Death rates per 100,000 population, age-adjusted to the 2000 U.S. standard population and the proportion of occupants who were unrestrained at the time of the fatal crash, were calculated. BRFSS, an annual, state-based, random-digit–dialed telephone survey of the noninstitutionalized U.S. civilian population aged ≥18 years, was used to estimate prevalence of seat belt use. FARS and BRFSS data were analyzed by a six-level rural-urban designation, based on the U.S. Department of Agriculture 2013 rural-urban continuum codes, and stratified by census region and type of state seat belt enforcement law (primary or secondary). Results Within each census region, age-adjusted passenger-vehicle–occupant death rates per 100,000 population increased with increasing rurality, from the most urban to the most rural counties: South, 6.8 to 29.2; Midwest, 5.3 to 25.8; West, 3.9 to 40.0; and Northeast, 3.5 to 10.8. (For the Northeast, data for the most rural counties were not reported because of suppression criteria; comparison is for the most urban to the second-most rural counties.) Similarly, the proportion of occupants who were unrestrained at the time of the fatal crash increased as rurality increased. Self-reported seat belt use in the United States decreased with increasing rurality, ranging from 88.8% in the most urban counties to 74.7% in the most rural counties. Similar differences in age-adjusted death rates and seat belt use were observed in states with primary and secondary seat belt enforcement laws. Interpretation Rurality was associated with higher age-adjusted passenger-vehicle–occupant death rates, a higher proportion of unrestrained passenger-vehicle–occupant deaths, and lower seat belt use among adults in all census regions and regardless of state seat belt enforcement type. Public Health Actions Seat belt use decreases and age-adjusted passenger-vehicle–occupant death rates increase with increasing levels of rurality. Improving seat belt use remains a critical strategy to reduce crash-related deaths in the United States, especially in rural areas where seat belt use is lower and age-adjusted death rates are higher than in urban areas. States and communities can consider using evidence-based interventions to reduce rural-urban disparities in seat belt use and passenger-vehicle–occupant death rates. PMID:28934184

The Gould's Belt very large array survey. III. The Orion region

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kounkel, Marina; Hartmann, Lee; Loinard, Laurent

2014-07-20

We present results from a high-sensitivity (60 μJy), large-scale (2.26 deg{sup 2}) survey obtained with the Karl G. Jansky Very Large Array as part of the Gould's Belt Survey program. We detected 374 and 354 sources at 4.5 and 7.5 GHz, respectively. Of these, 148 are associated with previously known young stellar objects (YSOs). Another 86 sources previously unclassified at either optical or infrared wavelengths exhibit radio properties that are consistent with those of young stars. The overall properties of our sources at radio wavelengths such as their variability and radio to X-ray luminosity relation are consistent with previous resultsmore » from the Gould's Belt Survey. Our detections provide target lists for follow-up Very Long Baseline Array radio observations to determine their distances as YSOs are located in regions of high nebulosity and extinction, making it difficult to measure optical parallaxes.« less

The Gould's Belt Very Large Array Survey. III. The Orion Region

NASA Astrophysics Data System (ADS)

Kounkel, Marina; Hartmann, Lee; Loinard, Laurent; Mioduszewski, Amy J.; Dzib, Sergio A.; Ortiz-León, Gisela N.; Rodríguez, Luis F.; Pech, Gerardo; Rivera, Juana L.; Torres, Rosa M.; Boden, Andrew F.; Evans, Neal J., II; Briceño, Cesar; Tobin, John

2014-07-01

We present results from a high-sensitivity (60 μJy), large-scale (2.26 deg2) survey obtained with the Karl G. Jansky Very Large Array as part of the Gould's Belt Survey program. We detected 374 and 354 sources at 4.5 and 7.5 GHz, respectively. Of these, 148 are associated with previously known young stellar objects (YSOs). Another 86 sources previously unclassified at either optical or infrared wavelengths exhibit radio properties that are consistent with those of young stars. The overall properties of our sources at radio wavelengths such as their variability and radio to X-ray luminosity relation are consistent with previous results from the Gould's Belt Survey. Our detections provide target lists for follow-up Very Long Baseline Array radio observations to determine their distances as YSOs are located in regions of high nebulosity and extinction, making it difficult to measure optical parallaxes.

Does finance affect environmental degradation: evidence from One Belt and One Road Initiative region?

PubMed

Hafeez, Muhammad; Chunhui, Yuan; Strohmaier, David; Ahmed, Manzoor; Jie, Liu

2018-04-01

This paper explores the effects of finance on environmental degradation and investigates environmental Kuznets curve (EKC) of each country among 52 that participate in the One Belt and One Road Initiative (OBORI) using the latest long panel data span (1980-2016). We utilized panel long run econometric models (fully modified ordinary least square and dynamic ordinary least square) to explore the long-run estimates in full panel and country level. Moreover, the Dumitrescu and Hurlin (2012) causality test is applied to examine the short-run causalities among our considered variables. The empirical findings validate the EKC hypothesis; the long-run estimates point out that finance significantly enhances the environmental degradation (negatively in few cases). The short-run heterogeneous causality confirms the bi-directional causality between finance and environmental degradation. The empirical outcomes suggest that policymakers should consider the environmental degradation issue caused by financial development in the One Belt and One Road region.

Noble gases fingerprint a metasedimentary fluid source in the Macraes orogenic gold deposit, New Zealand

NASA Astrophysics Data System (ADS)

Goodwin, Nicholas R. J.; Burgess, Ray; Craw, Dave; Teagle, Damon A. H.; Ballentine, Chris J.

2017-02-01

The world-class Macraes orogenic gold deposit (˜10 Moz resource) formed during the late metamorphic uplift of a metasedimentary schist belt in southern New Zealand. Mineralising fluids, metals and metalloids were derived from within the metasedimentary host. Helium and argon extracted from fluid inclusions in sulphide mineral grains (three crush extractions from one sample) have crustal signatures, with no evidence for mantle input (R/Ra = 0.03). Xenon extracted from mineralised quartz samples provides evidence for extensive interaction between fluid and maturing organic material within the metasedimentary host rocks, with 132Xe/36Ar ratios up to 200 times greater than air. Similarly, I/Cl ratios for fluids extracted from mineralised quartz are similar to those of brines from marine sediments that have interacted with organic matter and are ten times higher than typical magmatic/mantle fluids. The Macraes mineralising fluids were compositionally variable, reflecting either mixing of two different crustal fluids in the metasedimentary pile or a single fluid type that has had varying degrees of interaction with the host metasediments. Evidence for additional input of meteoric water is equivocal, but minor meteoric incursion cannot be discounted. The Macraes deposit formed in a metasedimentary belt without associated coeval magmatism, and therefore represents a purely crustal metamorphogenic end member in a spectrum of orogenic hydrothermal processes that can include magmatic and/or mantle fluid input elsewhere in the world. There is no evidence for involvement of minor intercalated metabasic rocks in the Macraes mineralising system. Hydrothermal fluids that formed other, smaller, orogenic deposits in the same metamorphic belt have less pronounced noble gas and halogen evidence for crustal fluid-rock interaction than at Macraes, but these deposits also formed from broadly similar metamorphogenic processes.

Genetic-evolution-based optimization methods for engineering design

NASA Technical Reports Server (NTRS)

Rao, S. S.; Pan, T. S.; Dhingra, A. K.; Venkayya, V. B.; Kumar, V.

1990-01-01

This paper presents the applicability of a biological model, based on genetic evolution, for engineering design optimization. Algorithms embodying the ideas of reproduction, crossover, and mutation are developed and applied to solve different types of structural optimization problems. Both continuous and discrete variable optimization problems are solved. A two-bay truss for maximum fundamental frequency is considered to demonstrate the continuous variable case. The selection of locations of actuators in an actively controlled structure, for minimum energy dissipation, is considered to illustrate the discrete variable case.

Six sigma.

PubMed

Carter, Pam

2010-12-01

When I was first introduced to the Six Sigma process, I resisted it with every ounce of energy I had. I continuously fabricated reasons so that I was unable to complete the training that my company required. When it came time for my performance review, I could not hide the truth from my manager; I had not completed the required training. It was then that I began my journey into the world of Six Sigma. Once I understood that a black belt and a green belt certification had nothing to do with karate, I felt much better. Copyright 2010, SLACK Incorporated.

Comments on the Parameters and Processes that Affect the Preservation Potential and Style of Oblique-Divergent Plate Boundaries

NASA Astrophysics Data System (ADS)

Umhoefer, P. J.

2014-12-01

Oblique-divergent or transtensional zones present particular challenges in ancient belts because of the poor preservation potential of the thinned continental crust and young oceanic crust. Many oblique belts will preferentially preserve their boundary zones that lie within continents rather than the main plate boundary zone, which will be at a much lower elevation and composed of denser crust. Zones of tectonic escape or strike-slip overprinting of arcs or plateaus deform continental crust and may be better preserved. Here I highlight parameters and processes that have major effects on oblique divergent belts. Strain partitioning is common, but not ubiquitous, along and across oblique boundaries; the causes of partitioning are not always clear and make this especially vexing for work in ancient belts. Partitioning causes complexity in the patterns of structures at all scales. Inherited structures commonly determine the orientation and style of structures along oblique boundaries and can control the pattern of faults across transtensional belts. Regionally, inherited trends of arcs or other 1000-km-scale features can control boundary structures. Experiments and natural examples suggest that oblique boundary zones contain less of a record of strike-slip faulting and more extensional structures. The obliquity of divergence produces predictable families of structures that typify (i) strike-slip dominated zones (obliquity <~20°), (ii) mixed zones (~20° - ~35°), and (iii) extension dominated zones (>~35°). The combination of partitioning and mixed structures in oblique zones means that the boundaries of belts with large-magnitude strike-slip faulting will commonly preserve little of no record of that faulting history. Plate boundaries localize strain onto the main plate boundary structures from the broader plate boundary and therefore the boundary zones commonly preserve the earlier structures more than later structures, a major problem in interpreting ancient belts. Sediment input is critical in some oblique plate boundaries because these belts become more pronounced sediment sinks over time. The evolving topography of oblique boundaries means that they have great variability of sediment flux into differing parts of the system; large rivers enter these belts only in special circumstances.

Are airbags a dangerous safety measure? A meta-analysis of the effects of frontal airbags on driver fatalities.

PubMed

Høye, Alena

2010-11-01

A meta-analysis has been conducted of the effectiveness of frontal airbags in reducing driver fatalities, and some potential moderator variables for airbag effectiveness have been investigated. The results confirm the assumption that airbags reduce accident fatalities among belted drivers, but the results are too heterogeneous for drawing conclusions about the size of the overall effect. No support has been found for the hypothesis that airbags increase overall fatality risk, as has been found in the study by Meyer and Finney (Meyer, M., Finney, T., 2005. Who wants Airbags? Chance, 18 (19) 3-16). The results do not seem to be affected by publication bias, and no indications of confounding effects of vehicle characteristics or impact velocity have been found. In frontal collisions belted driver fatalities were found to be reduced by about 22% when all types of airbags are regarded together. The revision of the test criteria for airbags in the USA in 1997 has improved airbag effectiveness. For unbelted drivers airbags are neither effective nor counterproductive, but may increase fatality risk in single vehicle accidents. The results show that there is a lack of knowledge about the effects of airbags in accidents that are not frontal collisions. 2010 Elsevier Ltd. All rights reserved.

Contrasting Cu-Au and Sn-W Granite Metallogeny through the Zircon Geochemical and Isotopic Record

NASA Astrophysics Data System (ADS)

Gardiner, Nicholas; Hawkesworth, Chris; Robb, Laurence; Whitehouse, Martin; Roberts, Nick; Kirkland, Chris

2017-04-01

Magmatic genesis and evolution - mediated by geodynamic setting - exert a primary control on the propensity of granites to be metal fertile. A revolution in our understanding of these petrogenetic processes has been made through a range of mineral-based tools, most notably the common accessory mineral zircon. There is consequently considerable interest in whether the geochemical and isotopic compositions of zircon can be applied to metallogenic problems. The paired magmatic belts of Myanmar have broadly contrasting metallogenic affinities (Sn-W versus Cu-Au), and are interpreted to have formed on the accretionary margin of the subducting Neo-Tethys Ocean. They therefore present the opportunity to geochemically compare and contrast the zircon compositions in two end-member types of granite-hosted mineral deposits generated in collisional settings. We present an integrated zircon isotope (U-Pb, Lu-Hf, O) and trace element dataset that fingerprint: (a) source; (b) redox conditions; and (c) degree of fractionation. These variables all impact on magma fertility, and our key question to address is whether they can be reliably traced and calibrated within the Myanmar zircon record. Granitoid-hosted zircons from the I-type copper arc have juvenile ɛHf (+7 to +12) and mantle-like δ18O (5.3 ‰), whereas zircons from the S-type tin belt have low ɛHf (-7 to -13) and heavier δ18O (6.2-7.7 ‰). Plotting Hf versus U/Yb reaffirms that the tin belt magmas contain greater crustal contributions than the copper arc rocks. Links between whole rock Rb/Sr and zircon Eu/Eu* highlights that the latter can be used to monitor magma fractionation in systems that crystallize plagioclase (low Sr/Y). Ce/Ce* and Eu/Eu* in zircon are thus sensitive to redox and fractionation respectively, and can be used to evaluate the sensitivity of zircons to the metallogenic affinity of their host rocks. Tin contents that exceed the solubility limit are required in order to make a magmatic-hydrothermal deposit, and empirical observations suggest that this threshold may be marked by zircon Eu/Eu* values of ca. < 0.08. The isotope and trace element signatures of both magmatic and detrital zircons can be developed into a useful exploration tool.

Barberton greenstone belt volcanism: Succession, style and petrogenesis

NASA Technical Reports Server (NTRS)

Byerly, G. R.; Lowe, D. R.

1986-01-01

The Barberton Mountain Land is an early Archean greenstone belt along the eastern margin of the Kaapvaal Craton of southern Africa. Detailed mapping in the southern portion of the belt leads to the conclusion that a substantial thickness is due to original deposition of volcanics and sediments. In the area mapped, a minimum thickness of 12km of predominantly mafic and ultramafic volcanics comprise the Komati, Hooggenoeg, and Kromberg Formations of the Onverwacht Group, and at least one km of predominantly pyroclastic and epiclastic sediments derived from dacitic volcanics comprise the Fig Tree Group. The Barberton greenstone belt formed primarily by ultramafic to mafic volcanism on a shallow marine platform which underwent little or no concurrent extension. Vents for this igneous activity were probably of the non-constructional fissure type. Dacitic volcanism occurred throughout the sequence in minor amounts. Large, constructional vent complexes were formed, and explosive eruptions widely dispersed pyroclastic debris. Only in the final stages of evolution of the belt did significant thrust-faulting occur, generally after, though perhaps overlapping with, the final stage of dacitic igneous activity. A discussion follows.

Human interface design using Button-type PEDOT electrode array in EIT

NASA Astrophysics Data System (ADS)

Wi, Hun; In Oh, Tong; Yoon, Sun; Kim, Kap Jin; Woo, Eung Je

2010-04-01

Animal and human experiments using a multi-channel EIT system requires a cumbersome procedure to attach multiple electrodes. We have to ensure good contact of all electrodes and manage many lead wires during experiments. The problem becomes more severe as we increase the number of electrodes. These may limit the applicability of the imaging method in practice. Noting this technical difficulty, there have been a few trials to design human interface means such as electrode belts, helmets or rings. In this study, we developed an electrode belt for long-term monitoring of human lung ventilation. The belt includes 16 embossed electrodes which make good contact with the skin. The electrode is made by conductive polymer and metallic thread. Soft cushion and wide contact area minimize uncomfortable sensation and reduce contact impedances. The electrodes are attached to an elastic fabric belt at equal spacing. We describe details of its design and fabrication. Using the electrode belt and recently developed multi-frequency EIT system KHU Mark2, we show time-difference chest images of three human subjects during normal breathing cycles.

46 CFR 132.365 - Emergency outfits.

Code of Federal Regulations, 2014 CFR

2014-10-01

... belt or a suitable harness. (3) One Type II or Type III flashlight constructed and marked in accordance...) Lifelines must be of steel or bronze wire rope. Steel wire rope must be either inherently corrosion...

A decade of infrared versus visible AOD analysis within the dust belt

NASA Astrophysics Data System (ADS)

Capelle, Virginie; Chédin, Alain; Pondrom, Marc; Crevoisier, Cyril; Armante, Raymond; Crépeau, Laurent; Scott, Noëlle

2017-04-01

Aerosols represent one of the dominant uncertainties in radiative forcing, partly because of their very high spatiotemporal variability, a still insufficient knowledge of their microphysical and optical properties, or of their vertical distribution. A better understanding and forecasting of their impact on climate therefore requires precise observations of dust emission and transport. Observations from space offer a good opportunity to follow, day by day and at high spatial resolution, dust evolution at global scale and over long time series. In this context, infrared observations, by allowing retrieving simultaneously dust optical depth (AOD) as well as the mean dust layer altitude, daytime and nighttime, over oceans and over continents, in particular over desert, appears highly complementary to observations in the visible. In this study, a decade of infrared observations (Metop-A/IASI and AIRS/AQUA) has been processed pixel by pixel, using a "Look-Up-Table" (LUT) physical approach. The retrieved infrared 10µm coarse-mode AOD is compared with the Spectral Deconvolution Algorithm (SDA) 500nm coarse mode AOD observed at 50 ground-based Aerosol RObotic NETwork (AERONET) sites located within the dust belt. Analyzing their brings into evidence an important geographical variability. Lowest values are found close to dust sources ( 0.45 for the Sahel or Arabian Peninsula, 0.6-0.7 for the Northern part of Africa or India), whereas the ratio increases for transported dust with values of 0.9-1 for the Caribbean and for the Mediterranean basin. This variability is interpreted as a marker of clays abundance, and might be linked to the dust particle illite to kaolinite ratio, a recognized tracer of dust sources and transport. More generally, it suggests that the difference between the radiative impact of dust aerosols in the visible and in the infrared depends on the type of particles observed. This highlights the importance of taking into account the specificity of the infrared when considering the role of mineral dust on the Earth's energy budget.

Lightcurve survey of V-type asteroids in the inner asteroid belt

NASA Astrophysics Data System (ADS)

Hasegawa, Sunao; Miyasaka, Seidai; Mito, Hiroyuki; Sarugaku, Yuki; Ozawa, Tomohiko; Kuroda, Daisuke; Nishihara, Setsuko; Harada, Akari; Yoshida, Michitoshi; Yanagisawa, Kenshi; Shimizu, Yasuhiro; Nagayama, Shogo; Toda, Hiroyuki; Okita, Kichi; Kawai, Nobuyuki; Mori, Machiko; Sekiguchi, Tomohiko; Ishiguro, Masateru; Abe, Takumi; Abe, Masanao

2014-06-01

We observed the lightcurves of 13 V-type asteroids [(1933) Tinchen, (2011) Veteraniya, (2508) Alupka, (3657) Ermolova, (3900) Knezevic, (4005) Dyagilev, (4383) Suruga, (4434) Nikulin, (4796) Lewis, (6331) 1992 FZ1, (8645) 1998 TN, (10285) Renemichelsen, and (10320) Reiland]. Using these observations we determined the rotational rates of the asteroids, with the exception of Nikulin and Renemichelsen. The distribution of rotational rates of 59 V-type asteroids in the inner main belt, including 29 members of the Vesta family, which are regarded as being ejecta from the asteroid (4) Vesta, is inconsistent with the best-fit Maxwellian distribution. This inconsistency may be due to the effect of thermal radiation Yarkovsky-O'Keefe-Radzievskii-Paddack (YORP) torques, which implies that the collision event that formed V-type asteroids is sub-billion to several billion years in age.

Reliability of measuring hip abductor strength following total knee arthroplasty using a hand-held dynamometer.

PubMed

Schache, Margaret B; McClelland, Jodie A; Webster, Kate E

2016-01-01

To investigate the test-retest reliability of measuring hip abductor strength in patients with total knee arthroplasty (TKA) using a hand-held dynamometer (HHD) with two different types of resistance: belt and manual resistance. Test-retest reliability of 30 subjects (17 female, 13 male, 71.9 ± 7.4 years old), 9.2 ± 2.7 days post TKA was measured using belt and therapist resistance. Retest reliability was calculated with intra-class coefficients (ICC3,1) and 95% confidence intervals (CI) for both the group average and the individual scores. A paired t-test assessed whether a difference existed between the belt and therapist methods of resistance. ICCs were 0.82 and 0.80 for the belt and therapist resisted methods, respectively. Hip abductor strength increases of 8 N (14%) for belt resisted and 14 N (17%) for therapist resisted measurements of the group average exceeded the 95% CI and may represent real change. For individuals, hip abductor strength increases of 33 N (72%) (belt resisted) and 57 N (79%) (therapist resisted) could be interpreted as real change. Hip abductor strength can be reliably measured using HHD in the clinical setting with the described protocol. Belt resistance demonstrated slightly higher test-retest reliability. Reliable measurement of hip abductor muscle strength in patients with TKA is important to ensure deficiencies are addressed in rehabilitation programs and function is maximized. Hip abductor strength can be reliably measured with a hand-held dynamometer in the clinical setting using manual or belt resistance.

Kinematics and Shoulder Belt Position of Child Rear Seat Passengers during Vehicle Maneuvers

PubMed Central

Bohman, Katarina; Stockman, Isabelle; Jakobsson, Lotta; Osvalder, Anna-Lisa; Bostrom, Ola; Arbogast, Kristy B.

2011-01-01

Head impact to the seat back has been identified as one important injury causation scenario for seat belt restrained, head-injured children and previous research highlighted vehicle maneuvers prior to impact as possible contributing factors. The aim was to quantify kinematics of child occupants during swerving maneuvers focusing on the child’s lateral movement and seat belt position relative to the child’s shoulder. A study was conducted on a closed-circuit test track with 16 children aged 4–12, restrained in the rear seat of a modern passenger vehicle. A professional driving instructor drove at 50 km/h making sharp turns in a repeatable fashion, resulting in inboard motion of the children. The children were exposed to two turns in each of two restraint systems. Shorter children were on a booster or highback booster cushion. The taller children were seated on a booster cushion or with only a lap and shoulder seat belt. Four film cameras were fixed in the vehicle monitoring the child. Vehicle data were also collected. The seat belt slipped off the shoulder in 1 of 5 turns, varying by age and restraint type. Among shorter children, the belt slipped off in a majority of turns when seated on a booster cushion while the belt remained on the shoulder when seated on the highback booster cushion. Among taller children, the shoulder belt moved far laterally on the shoulder in half of the turns. This data provides valuable knowledge on possible pre-impact postures of children as a result of vehicle swerving maneuvers for a variety of restraint systems. PMID:22105379

Basalt or Not? Near-infrared Spectra, Surface Mineralogical Estimates, and Meteorite Analogs for 33 Vp-type Asteroids

NASA Astrophysics Data System (ADS)

Hardersen, Paul S.; Reddy, Vishnu; Cloutis, Edward; Nowinski, Matt; Dievendorf, Margaret; Genet, Russell M.; Becker, Savan; Roberts, Rachel

2018-07-01

Investigations of the main asteroid belt and efforts to constrain that population’s physical characteristics involve the daunting task of studying hundreds of thousands of small bodies. Taxonomic systems are routinely employed to study the large-scale nature of the asteroid belt because they utilize common observational parameters, but asteroid taxonomies only define broadly observable properties and are not compositionally diagnostic. This work builds upon the results of work by Hardersen et al., which has the goal of constraining the abundance and distribution of basaltic asteroids throughout the main asteroid belt. We report on the near-infrared (NIR: 0.7 to 2.5 μm) reflectance spectra, surface mineralogical characterizations, analysis of spectral band parameters, and meteorite analogs for 33 Vp asteroids. NIR reflectance spectroscopy is an effective remote sensing technique to detect most pyroxene group minerals, which are spectrally distinct with two very broad spectral absorptions at ∼0.9 and ∼1.9 μm. Combined with the results from Hardersen et al., we identify basaltic asteroids for ∼95% (39/41) of our inner-belt Vp sample, but only ∼25% (2/8) of the outer-belt Vp sample. Inner-belt basaltic asteroids are most likely associated with (4) Vesta and represent impact fragments ejected from previous collisions. Outer-belt Vp asteroids exhibit disparate spectral, mineralogical, and meteorite analog characteristics and likely originate from diverse parent bodies. The discovery of two additional likely basaltic asteroids provides additional evidence for an outer-belt basaltic asteroid population.

Turbulent Premixed Flames in Microgravity

NASA Technical Reports Server (NTRS)

Menon, Suresh

1996-01-01

The experimental cold-flow facility is now full operational and is currently being used to obtain baseline turbulence data in a Couette flow. The baseline turbulence data is necessary to confirm the capability of the chosen device to generate and maintain the required turbulence intensity. Subsequent reacting flow studies will assume that a similar turbulent flow field exists ahead of the premixed flame. Some modifications and refinements had to be made to enable accurate measurements. It consists of two rollers, one (driven by a motor) which drives a continuous belt and four smaller rollers used to set the belt spacing and tension to minimize belt flutter. The entire assemble is enclosed in a structure that has the dimensions to enable future drop tower experiments of the hot facility. All critical dimensions are the same as the original plans except for the pulley ratio which has been changed to enable a wider operating regime in terms of the Reynolds number. With the current setup, Reynolds numbers as low as 100 and as high as 14,000 can be achieved. This is because the in-between belt spacing can be varied from 1 cm to 7.6 cm, and the belt speed can be accurately varied from .15 m/sec to 3.1 m/sec.

A synthesis of mineralization styles and geodynamic settings of the Paleozoic and Mesozoic metallic ore deposits in the Altay Mountains, NW China

NASA Astrophysics Data System (ADS)

Yang, Fuquan; Geng, Xinxia; Wang, Rui; Zhang, Zhixin; Guo, Xuji

2018-06-01

The Altay Mountains within the Xinjiang region of northwestern China hosts major metallic ore deposits. Here we review the geological characteristics, metallogenic features and tectonic settings of these deposits. The metallic ore deposits in the Altay Mountains occur mainly within four regions: North Altay, Central Altay, South Altay and Erqis. We recognize seven types of metallic ore deposits in the Altay Mountains: VMS, submarine volcanogenic iron, magmatic, skarn, pegmatite, hydrothermal vein (Cu-Zn, Fe) and orogenic gold. Among these types, the VMS, pegmatite, orogenic gold and skarn deposits are the most common. Most of the rare metal pegmatite deposits are distributed in Central Altay, with only a few in South Altay. The VMS, submarine volcanogenic type iron and skarn-type deposits are distributed in South Altay, whereas the orogenic-type gold deposits are distributed in the Erqis Fault belt. The hydrothermal vein-type deposits occur in the Erqis Fault belt and Chonghu'er Basin in South Altay. Magmatic-type deposits are mostly in the Erqis Fault belt and Central Altay. Based on isotopic age data, the VMS, submarine volcanogenic-type Fe and skarn-type Cu, Pb, Zn, Fe mineralization occurred during Early-Middle Devonian (∼410-377 Ma), orogenic-type Au, magmatic-type Cu-Ni, and a small number of skarn-type Fe, hydrothermal vein-type Cu-Zn, pegmatite-type rare-metal deposits in Early-Middle Permian (293-261 Ma), pegmatite-type rare-metal deposits, few skarn-type Fe deposit in Early-Middle Triassic (248-232 Ma), and dominantly represented by pegmatite-type rare-metal deposits in Late Triassic-Early Jurassic (223-180 Ma). The metallic ore deposits in the Altay Mountains formed in various tectonic settings, such as the Early-Middle Devonian continental arc and oceanic island arc, Early-Middle Permian post-collisional extensional setting, and Triassic-Early Jurassic intracontinental setting.

Electron radiation belt dynamics during magnetic storms and in quiet time

NASA Astrophysics Data System (ADS)

Lazutin, Leonid; Dmitriev, Aleksey; Suvorova, Alla

2018-03-01

The paper discusses the dynamics of the outer electron belt, adiabatic and nonadiabatic mechanisms of replenishment and losses of energetic electrons. Under undisturbed conditions, the outer electron belt gradually empties: in the inner magnetosphere due to electron precipitation in the atmosphere and in the quasi-trapping region due to losses at the magnetopause because drift shells of electrons are not closed there. The latter process does not occur in normal years due to the masking replenishment by freshly accelerated particles, but in years of extremely low activity, it leads to a significant decrease in the electron population of the belt. During the magnetic storm main phase, the first reason for the decrease in the electron flux intensity is the adiabatic cooling associated with conservation of adiabatic invariants and complemented by precipitation of electrons into the atmosphere and their dropout at the magnetopause. Electron flux increases involve E×B electron injection by the induction electric field of substorm activation and by the large-scale solar wind electric field, with pitch energy diffusion along with adiabatic heating in the recovery phase. The rate of electron flux recovery after a storm is determined by the ratio of nonadiabatic increases and losses; hence the electron flux represents a continuous series from low to very high values. The combination of these processes determines the individual character of radiation belt development during each magnetic storm and the behavior of the belt in the quiet time.

Sur la présence d'une série molassique (de type série pourprée) au Sud-Est de l'Ahaggar (In Guezzam, Ahaggar, Algérie)Presence of molassic series ('Série pourprée' type) in the Southeast of the Ahaggar (In Guezzam, Ahaggar, Algeria)

NASA Astrophysics Data System (ADS)

Djellit, Hamou; Henry, Bernard; Derder, Mohamed E. M.

In the western Ahaggar shield, the transition between the Precambrian and the Ordovician units is characterised by thick volcano-sedimentary series ('Série pourprée' of the Ahnet). This series, in part of Cambrian age, results from the demolition of the Panafrican belt. Similar series were known in grabens located between the West African craton and the Ahaggar, from the 'Adrar des Iforas', in the south, to the Ougarta belt, in the north. We describe in this study a new formation identical to the 'Série pourprée' of the Ahnet, but cropping out in the far Southeast of the Ahaggar (In Guezzam). This new datum improves the Panafrican belt configuration. To cite this article: H. Djellit et al., C. R. Geoscience 334 (2002) 789-794.

A study of binary Kuiper belt objects

NASA Astrophysics Data System (ADS)

Kern, Susan Diane

2006-06-01

About 10 5 bodies larger than 100km in diameter (Jewitt 1998) reside in the Kuiper Belt, beyond the orbit of Neptune. Since 1992 observational surveys have discovered over one thousand of these objects, believed to be fossil remnants of events that occurred nearly 4.5 billion years ago. Sixteen of these objects are currently known to be binaries, and many more are expected to be discovered. As part of the Deep Ecliptic Survey (DES) I have helped catalog nearly one third of the known Kuiper Belt object (KBO) population, and used that database for further physical studies. Recovery observations for dynamical studies of newly discovered objects with the Magellan telescopes and a high resolution imager, MagIC, revealed three binaries, 88611 (2001QT297), 2003QY90, and 2005EO304. One binary was found in the discovery observations, 2003UN284. Lightcurve measurements of these, and other non-binary KBOs, were obtained to look for unique rotational characteristics. Eleven of thirty-three objects, excluding the binaries, were found to have measurable variability. One of these objects, 2002GW32 has a particularly large amplitude (> 1 magnitude) of variability, and 2002GP32 has a relatively short (~3.3 hours, single-peaked) lightcurve. Among the binary population all the observed objects showed some level of variation. The secondary of 88611 was fit with a single-peaked period of 5.5±0.02 hours while the primary component appears to be non-variable above the measurement errors (0.05 magnitudes). Neither component appears to be color variable. The components of 2003QY90 are both highly variable yielding single- peaked rotation periods of 3.5±1.1 and 7.2±2.9 hours with amplitudes of 0.34±0.06 and 0.90±0.18 magnitudes, respectively. The rotation periods are comparable to those of other non-binary KBOs although distinct from that of an identified contact binary. Orbits and partial orbits for Kuiper belt binaries (KBBs) show a wide range of eccentricities, and an increasing number of binaries with decreasing binary semi-major axis. These characteristics exclude the formation models proposed by Funato et al. (2003) and Weidenschilling (2002), respectively. Conversely, the formation models of Astakhov et al. (2005) and Goldreich et al. (2002) appear to describe the observations, at least in part. (Copies available exclusively from MIT Libraries, Rm. 14-0551, Cambridge, MA 02139-4307. Ph. 617-253-5668; Fax 617-253-1690.)

Generation of 8.3 dB continuous variable quantum entanglement at a telecommunication wavelength of 1550 nm

NASA Astrophysics Data System (ADS)

Jinxia, Feng; Zhenju, Wan; Yuanji, Li; Kuanshou, Zhang

2018-01-01

Continuous variable quantum entanglement at a telecommunication wavelength of 1550 nm is experimentally generated using a single nondegenerate optical parametric amplifier based on a type-II periodically poled KTiOPO4 crystal. The triply resonant of the nondegenerate optical parametric amplifier is adjusted by tuning the crystal temperature and tilting the orientation of the crystal in the optical cavity. Einstein-Podolsky-Rosen-entangled beams with quantum correlations of 8.3 dB for both the amplitude and phase quadratures are experimentally generated. This system can be used for continuous variable fibre-based quantum communication.

Origin and evolution of two-component debris discs and an application to the q1 Eridani system

NASA Astrophysics Data System (ADS)

Schüppler, Christian; Krivov, Alexander V.; Löhne, Torsten; Booth, Mark; Kirchschlager, Florian; Wolf, Sebastian

2016-09-01

Many debris discs reveal a two-component structure, with an outer Kuiper-belt analogue and a warm inner component whose origin is still a matter of debate. One possibility is that warm emission stems from an `asteroid belt' closer in to the star. We consider a scenario in which a set of giant planets is formed in an initially extended planetesimal disc. These planets carve a broad gap around their orbits, splitting up the disc into the outer and the inner belts. After the gas dispersal, both belts undergo collisional evolution in a steady-state regime. This scenario is explored with detailed collisional simulations involving realistic physics to describe a long-term collisional depletion of the two-component disc. We find that the inner disc may be able to retain larger amounts of material at older ages than thought before on the basis of simplified analytic models. We show that the proposed scenario is consistent with a suite of thermal emission and scattered light observational data for a bright two-temperature debris disc around a nearby solar-type star q1 Eridani. This implies a Solar system-like architecture of the system, with an outer massive `Kuiper belt', an inner `asteroid belt', and a few Neptune- to Jupiter-mass planets in between.

SPHERE Sheds New Light on the Collisional History of Main-belt Asteroids

NASA Astrophysics Data System (ADS)

Marsset, M.; Carry, B.; Pajuelo, M.; Viikinkoski, M.; Hanuš, J.; Vernazza, P.; Dumas, C.; Yang, B.

2017-09-01

The Spectro-Polarimetric High-contrast Exoplanet REsearch (SPHERE) instrument has unveiled unprecedented details of the three-dimensional shape, surface topography and cratering record of four medium-sized ( 200 km) asteroids, opening the prospect of a new era of ground-based exploration of the asteroid belt. Although two of the targets, (130) Elektra and (107) Camilla, have been observed extensively for more than fifteen years by the first-generation adaptive optics imagers, two new moonlets were discovered around these targets, illustrating the unique power of SPHERE. In the next two years SPHERE will continue to collect high- angular-resolution and high-contrast measurements of about 40 asteroids. These observations of a large number of asteroids will provide a unique dataset to better understand the collisional history and multiplicity rate of the asteroid belt.

Cross-stiffened continuous fiber structures

NASA Technical Reports Server (NTRS)

Ewen, John R.; Suarez, Jim A.

1993-01-01

Under NASA's Novel Composites for Wing and Fuselage Applications (NCWFA) program, Contract NAS1-18784, Grumman is evaluating the structural efficiency of graphite/epoxy cross-stiffened panel elements fabricated using innovative textile preforms and cost effective Resin Transfer Molding (RTM) and Resin Film Infusion (RFI) processes. Two three-dimensional woven preform assembly concepts have been defined for application to a representative window belt design typically found in a commercial transport airframe. The 3D woven architecture for each of these concepts is different; one is vertically woven in the plane of the window belt geometry and the other is loom woven in a compressed state similar to an unfolded eggcrate. The feasibility of both designs has been demonstrated in the fabrication of small test element assemblies. These elements and the final window belt assemblies will be structurally tested, and results compared.

A low-density M-type asteroid in the main belt.

PubMed

Margot, J L; Brown, M E

2003-06-20

The orbital parameters of a satellite revolving around 22 Kalliope indicate that the bulk density of this main-belt asteroid is 2.37 +/- 0.4 grams per cubic centimeter. M-type asteroids such as Kalliope are thought to be the disrupted metallic cores of differentiated bodies. The low-density indicates that Kalliope cannot be predominantly composed of metal and may be composed of chondritic material with approximately 30% porosity. The satellite orbit is circular, suggesting that Kalliope and its satellite have different internal structures and tidal dissipation rates. The satellite may be an aggregate of impact ejecta from an earlier collision with Kalliope.

Orbit-dependent spectral trends for the near-Earth asteroid population

NASA Astrophysics Data System (ADS)

Fevig, Ronald Adrey

Results of visible to near-infrared spectrophotometric observations of 55 near- Earth asteroids (NEAs) are reported. The observing techniques, instrumentation, and method of data analysis are described. A new asteroid classification method that directly compares these NEA spectra with spectral features of meteorites is presented. Two major siliceous groups (having discernible "1-mm" absorptions) result from this method, OC-likes which match the spectra of ordinary chondrites and S-types. The dataset shows a preponderance of spectra consistent with ordinary chondrites (23 NEAs), as well as S-types (19), 2 with spectra consistent with black ordinary chondrites, 2 R-types, and 9 that show no 1-mm absorption. The spectral characteristics of the siliceous S-type and OC-like asteroids blend together, providing evidence that S-type asteroids are simply ordinary chondrites whose surface has been modified by weathering. This helps resolve the long standing question of the lack of main belt asteroids having spectra matching ordinary chondrite meteorites. Main belt asteroids have on average much older surfaces while NEAs that exhibit OC-like spectra have younger surfaces. It was found that fresh objects having spectra consistent with ordinary chondrites (1) occupy mostly highly eccentric Apollo orbits which encounter a strong collisional environment in the asteroid main-belt, (2) may have been recently injected into high eccentricity orbits, or (3) have suffered tidal disruption. S-type NEAs reside primarily in orbits that do not cross the asteroid main-belt. This orbit dependent trend is verified by using the larger NEA dataset of Binzel et al. (2004a). Nine NEAs from this survey exhibiting no 1-mm absorption can be associated with extinct comets, iron meteorites or enstatite meteorites. It is shown that most of these NEAs must be extinct comets, implying a considerably larger fraction of comets among the NEA population than previously thought. A correlation of these objects with low inclination orbits is found. This study finds that the NEA population is divided roughly as follows: ~40 % fresh ordinary chondrites, ~35% S-types, ~20% extinct comet candidates, and ~5% in minor classes. This work may guide NEA mitigation planning should such an emergency arise.

A Dependable Localization Algorithm for Survivable Belt-Type Sensor Networks.

PubMed

Zhu, Mingqiang; Song, Fei; Xu, Lei; Seo, Jung Taek; You, Ilsun

2017-11-29

As the key element, sensor networks are widely investigated by the Internet of Things (IoT) community. When massive numbers of devices are well connected, malicious attackers may deliberately propagate fake position information to confuse the ordinary users and lower the network survivability in belt-type situation. However, most existing positioning solutions only focus on the algorithm accuracy and do not consider any security aspects. In this paper, we propose a comprehensive scheme for node localization protection, which aims to improve the energy-efficient, reliability and accuracy. To handle the unbalanced resource consumption, a node deployment mechanism is presented to satisfy the energy balancing strategy in resource-constrained scenarios. According to cooperation localization theory and network connection property, the parameter estimation model is established. To achieve reliable estimations and eliminate large errors, an improved localization algorithm is created based on modified average hop distances. In order to further improve the algorithms, the node positioning accuracy is enhanced by using the steepest descent method. The experimental simulations illustrate the performance of new scheme can meet the previous targets. The results also demonstrate that it improves the belt-type sensor networks' survivability, in terms of anti-interference, network energy saving, etc.

A Dependable Localization Algorithm for Survivable Belt-Type Sensor Networks

PubMed Central

Zhu, Mingqiang; Song, Fei; Xu, Lei; Seo, Jung Taek

2017-01-01

As the key element, sensor networks are widely investigated by the Internet of Things (IoT) community. When massive numbers of devices are well connected, malicious attackers may deliberately propagate fake position information to confuse the ordinary users and lower the network survivability in belt-type situation. However, most existing positioning solutions only focus on the algorithm accuracy and do not consider any security aspects. In this paper, we propose a comprehensive scheme for node localization protection, which aims to improve the energy-efficient, reliability and accuracy. To handle the unbalanced resource consumption, a node deployment mechanism is presented to satisfy the energy balancing strategy in resource-constrained scenarios. According to cooperation localization theory and network connection property, the parameter estimation model is established. To achieve reliable estimations and eliminate large errors, an improved localization algorithm is created based on modified average hop distances. In order to further improve the algorithms, the node positioning accuracy is enhanced by using the steepest descent method. The experimental simulations illustrate the performance of new scheme can meet the previous targets. The results also demonstrate that it improves the belt-type sensor networks’ survivability, in terms of anti-interference, network energy saving, etc. PMID:29186072

Use of booster seats by Michigan children 4-8 years of age.

PubMed

Eby, David W; Bingham, C Raymond; Vivoda, Jonathon M; Ragunathan, Trivellore

2005-11-01

This study reports the results of a statewide survey of restraint use by 4-8-year-old children in Michigan conducted between July 13 and 29, 2004. In this study, 3420 4-8-year-old children were observed traveling in passenger cars, vans/minivans, sport-utility vehicles, and pickup trucks. Restraint use was estimated for children traveling in all vehicles combined, as well as for each vehicle type separately. Children's restraint use was also calculated by the sex, age, and belt use of the driver. Separate estimates were also made of the restraint use of 4-8-year-old children by the combination of sex and belt use of the driver. Overall, 8.6 +/- 5.9% of 4-8-year-old children were seated in a booster seat, 48.8 +/- 10.3% were wearing a safety belt, 5.1 +/- 3.4% were seated in a child safety seat, and the remaining 37.5 +/- 11.5% were traveling completely unrestrained. When examining the rates by vehicle type, booster seat use was highest among children riding in sport-utility vehicles and lowest for those in pickup trucks. Surprisingly, children riding in passenger cars were more likely to be completely unrestrained than those in any other type of vehicle. While the sex of the driver did not seem to influence the restraint use of target-aged children, the driver's age did seem to have an effect. Booster seat use was quite low (0.6%) for children traveling with a driver over the age of 60, compared to 7.0 and 9.1% for those riding with drivers 16-29 and 30-59 years of age, respectively. The safety belt use of the driver also had a substantial influence on children's restraint use. Irrespective of driver sex, children riding with belted drivers were traveling in booster seats about 10% of the time, while those riding with unbelted drivers were only in booster seats 1-2% of the time.

Gold deposits in metamorphic belts: Overview of current understanding, outstanding problems, future research, and exploration significance

USGS Publications Warehouse

Groves, D.I.; Goldfarb, R.J.; Robert, F.; Hart, C.J.R.

2003-01-01

Metamorphic belts are complex regions where accretion or collision has added to, or thickened, continental crust. Gold-rich deposits can be formed at all stages of orogen evolution, so that evolving metamorphic belts contain diverse gold deposit types that may be juxtaposed or overprint each other. This partly explains the high level of controversy on the origin of some deposit types, particularly those formed or overprinted/remobilized during the major compressional orogeny that shaped the final geometry of the hosting metamorphic belts. These include gold-dominated orogenic and intrusion-related deposits, but also particularly controversial gold deposits with atypical metal associations. There are a number of outstanding problems for all types of gold deposits in metamorphc belts. These include the following: (1) definitive classifications, (2) unequivocal recognition of fluid and metal sources, (3) understanding of fluid migration and focusing at all scales, (4) resolution of the precise role of granitoid magmatism, (5) precise gold-depositional mechanisms, particularly those producing high gold grades, and (6) understanding of the release of CO2-rich fluids from subducting slabs and subcreted oceanic crust and granitoid magmas at different crustal levels. Research needs to be better coordinated and more integrated, such that detailed fluid-inclusion, trace-element, and isotopic studies of both gold deposits and potential source rocks, using cutting-edge technology, are embedded in a firm geological framework at terrane to deposit scales. Ultimately, four-dimensional models need to be developed, involving high-quality, three-dimensional geological data combined with integrated chemical and fluid-flow modeling, to understand the total history of the hydrothermal systems involved. Such research, particularly that which can predict superior targets visible in data sets available to exploration companies before discovery, has obvious spin-offs for global- to deposit-scale targeting of deposits with superior size and grade in the covered terranes that will be the exploration focus of the twenty-first century.

Process Monitoring Evaluation and Implementation for the Wood Abrasive Machining Process

PubMed Central

Saloni, Daniel E.; Lemaster, Richard L.; Jackson, Steven D.

2010-01-01

Wood processing industries have continuously developed and improved technologies and processes to transform wood to obtain better final product quality and thus increase profits. Abrasive machining is one of the most important of these processes and therefore merits special attention and study. The objective of this work was to evaluate and demonstrate a process monitoring system for use in the abrasive machining of wood and wood based products. The system developed increases the life of the belt by detecting (using process monitoring sensors) and removing (by cleaning) the abrasive loading during the machining process. This study focused on abrasive belt machining processes and included substantial background work, which provided a solid base for understanding the behavior of the abrasive, and the different ways that the abrasive machining process can be monitored. In addition, the background research showed that abrasive belts can effectively be cleaned by the appropriate cleaning technique. The process monitoring system developed included acoustic emission sensors which tended to be sensitive to belt wear, as well as platen vibration, but not loading, and optical sensors which were sensitive to abrasive loading. PMID:22163477

The Application of a Piezo-Resistive Cardiorespiratory Sensor System in an Automobile Safety Belt

PubMed Central

Hamdani, Syed Talha Ali; Fernando, Anura

2015-01-01

Respiratory and heart failure are conditions that can occur with little warning and may also be difficult to predict. Therefore continuous monitoring of these bio-signals is advantageous for ensuring human health. The car safety belt is mainly designed to secure the occupants of the vehicle in the event of an accident. In the current research a prototype safety belt is developed, which is used to acquire respiratory and heart signals, under laboratory conditions. The current safety belt is constructed using a copper ink based nonwoven material, which works based on the piezo-resistive effect due to the pressure exerted on the sensor as a result of expansion of the thorax/abdomen area of the body for respiration and due to the principle of ballistocardiography (BCG) in heart signal sensing. In this research, the development of a theoretical model to qualitatively describe the piezo-resistive material is also presented in order to predict the relative change in the resistance of the piezo-resistive material due to the pressure applied. PMID:25831088

Comments on "The Cenozoic fold-and-thrust belt of Eastern Sardinia: Evidences from the integration of field data with numerically balanced geological cross section" by Arragoni et al., 2016

NASA Astrophysics Data System (ADS)

Berra, F.; Lanfranchi, A.; Jadoul, F.

2017-02-01

Arragoni et al. (2016) suggest in their paper published on tectonics that the carbonate succession of Eastern Sardinia represents a Cenozoic fold-and-thrust belt, related to the Alpine orogenesis. According to these authors, this supposed fold-and-thrust belt represents the southward continuation of the Alpine Corsica collisional chain and the missing link between the Alpine Chain and the Calabria-Peloritani domain. Field evidence and the published literature document instead that all the surfaces that Arragoni et al. interpret as thrust are actually stratigraphic contacts. The balanced geological section of Arragoni represents thus a geometric exercise missing the basic data needed to nurse the proposed model, and it does not reflect the geology of Eastern Sardinia. The data provided by Arragoni et al. (2016) do not support the presence of an Alpine thrust-and-fold belt in Eastern Sardinia, and this paper may suggest to the geological community a misleading interpretation of the geodynamic evolution of the Alpine and Mediterranean area.

Assessing the risks for poliovirus outbreaks in polio-free countries--Africa, 2012-2013.

PubMed

2013-09-20

In 2012, the World Health Assembly of the World Health Organization (WHO) declared the completion of polio eradication a programmatic emergency. Indigenous wild poliovirus (WPV) transmission remains uninterrupted in Nigeria (in the WHO African Region [AFR]) and in Afghanistan and Pakistan (in the WHO Eastern Mediterranean Region [EMR]). In the WHO AFR, multiple WPV outbreaks have occurred since 2003 after importation of indigenous West African WPV into 21 previously polio-free countries in a "WPV importation belt"* that extends across the continent. The Global Polio Eradication Initiative (GPEI) and WHO regional offices have used indicators of population immunity, surveillance quality, and other factors (e.g., high-risk subpopulations and proximity to WPV-affected countries) to assess the risk for outbreaks in polio-free countries and guide the implementation of risk mitigation measures to limit poliovirus transmission after WPV importation and prevent the emergence of circulating vaccine-derived poliovirus (cVDPV). Despite risk mitigation efforts, a polio outbreak, first confirmed in May 2013, is ongoing; as of September 10, a total of 178 WPV type 1 (WPV1) cases have been reported in Somalia† (163 cases), Kenya (14 cases) and Ethiopia (1 case), after importation of WPV1 of West African origin. This report summarizes steps taken by the GPEI to assess and mitigate the risks for outbreaks after WPV importation or the emergence of cVDPV in polio-free countries within the WHO AFR's "WPV importation belt." All countries will continue to have some level of risk for WPV outbreaks as long as endemic circulation continues in Afghanistan, Nigeria, and Pakistan.

AN IMPROVED STRATEGY FOR REGRESSION OF BIOPHYSICAL VARIABLES AND LANDSAT ETM+ DATA. (R828309)

EPA Science Inventory

Empirical models are important tools for relating field-measured biophysical variables to remote sensing data. Regression analysis has been a popular empirical method of linking these two types of data to provide continuous estimates for variables such as biomass, percent wood...

The Crvenka loess-paleosol sequence (Vojvodina, Northern Serbia)- a record of continuous domination of the Late Pleistocene grasslands

NASA Astrophysics Data System (ADS)

Markovic, Slobodan; Sümegi, Pál; Stevens, Thomas; Obreht, Igor; Chu, Wei; Buggle, Björn; Zech, Michael; Zech, Roland; Hambach, Ulrich; Lehmkuhl, Frank; Zeeden, Christian; Gavrilov, Milivoj; Svircev, Zorica

2016-04-01

In this study we present a comparison of two independent paleo-environmental evidences: novel n-alkane biomarkers and traditional land snails assemblages, associated with widely used proxy records such as the low field magnetic susceptibility, grain size and various isotopic and geochemical indices. These paleo-environmental proxy records provide evidence for the continued predominance of the different grassland vegetation types during the entire Late Pleistocene. The results presented in this study highlight the spatial differences in the environmental conditions during the Late Pleistocene across the European loess belt. Contrary to other European loess provinces characterized by high diversity of the Late Pleistocene environments (ranging from tundra-like to deciduous forest habitats), our investigations indicate a continued dominance of grassland-dominated ecosystems in the southeastern Carpathian Basin. This uninterrupted presence of Late Pleistocene grassland zone in the southeastern part of the Carpathian Basin may have played an important role in the preservation of exceptional biodiversity of the Balkan region, as well as in the migration of anatomically modern humans into Europe.

Recent changes in county-level corn yield variability in the United States from observations and crop models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leng, Guoyong

The United States is responsible for 35% and 60% of global corn supply and exports. Enhanced supply stability through a reduction in the year-to-year variability of US corn yield would greatly benefit global food security. Important in this regard is to understand how corn yield variability has evolved geographically in the history and how it relates to climatic and non-climatic factors. Results showed that year-to-year variation of US corn yield has decreased significantly during 1980-2010, mainly in Midwest Corn Belt, Nebraska and western arid regions. Despite the country-scale decreasing variability, corn yield variability exhibited an increasing trend in South Dakota,more » Texas and Southeast growing regions, indicating the importance of considering spatial scales in estimating yield variability. The observed pattern is partly reproduced by process-based crop models, simulating larger areas experiencing increasing variability and underestimating the magnitude of decreasing variability. And 3 out of 11 models even produced a differing sign of change from observations. Hence, statistical model which produces closer agreement with observations is used to explore the contribution of climatic and non-climatic factors to the changes in yield variability. It is found that climate variability dominate the change trends of corn yield variability in the Midwest Corn Belt, while the ability of climate variability in controlling yield variability is low in southeastern and western arid regions. Irrigation has largely reduced the corn yield variability in regions (e.g. Nebraska) where separate estimates of irrigated and rain-fed corn yield exist, demonstrating the importance of non-climatic factors in governing the changes in corn yield variability. The results highlight the distinct spatial patterns of corn yield variability change as well as its influencing factors at the county scale. I also caution the use of process-based crop models, which have substantially underestimated the change trend of corn yield variability, in projecting its future changes.« less

Cenozoic intracontinental deformation of the Kopeh Dagh Belt, Northeastern Iran

NASA Astrophysics Data System (ADS)

Chu, Yang; Wan, Bo; Chen, Ling; Talebian, Morteza

2016-04-01

Compressional intracontinental orogens represent large tectonic zones far from plate boundaries. Since intracontinental mountain belts cannot be framed in the conventional plate tectonics theory, several hypotheses have been proposed to account for the formations of these mountain belts. The far-field effect of collision/subduction at plate margins is now well accepted for the origin and evolution of the intracontinental crust thickening, as exemplified by the Miocene tectonics of central Asia. In northern Iran, the Binalud-Alborz mountain belt witnessed the Triassic tectonothermal events (Cimmerian orogeny), which are interpreted as the result of the Paleotethys Ocean closure between the Eurasia and Central Iran blocks. The Kopeh Dagh Belt, located to the north of the Binalud-Alborz Belt, has experienced two significant tectonic phases: (1) Jurassic to Eocene rifting with more than 7 km of sediments; and (2) Late Eocene-Early Oligocene to Quaternary continuous compression. Due to the high seismicity, deformation associated with earthquakes has received more and more attention; however, the deformation pattern and architecture of this range remain poorly understood. Detailed field observations on the Cenozoic deformation indicate that the Kopeh Dagh Belt can be divided into a western zone and an eastern zone, separated by a series of dextral strike-slip faults, i.e. the Bakharden-Quchan Fault System. The eastern zone characterized by km-scale box-fold structures, associated with southwest-dipping reverse faults and top-to-the NE kinematics. In contrast, the western zone shows top-to-the SW kinematics, and the deformation intensifies from NE to SW. In the northern part of this zone, large-scale asymmetrical anticlines exhibit SW-directed vergence with subordinate thrusts and folds, whereas symmetrical anticlines are observed in the southern part. In regard to its tectonic feature, the Kopeh Dagh Belt is a typical Cenozoic intracontinental belt without ophiolites or arc magmatism. During the Jurassic to Eocene rifting, this belt acted as the southern boundary of the Amu Darya Basin with normal faulting, which is also widespread in the South Caspian Sea and the Black Sea. Moreover, such an extended area became a relatively weak zone within the Eurasian Plate, and could be easily reworked. Because of the collision in the Zagros Belt, the intracontinental compression commenced as early as Late Eocene to Early Oligocene, which is interpreted as tectonic inversion along this weak zone. The western zone of the Kopeh Dagh Belt was also affected by southerly indentation/extrusion of the South Caspian block since middle Miocene, possibly resulting in the different deformation patterns between the western and eastern zones.

Vulnerability Assessment of Mangrove Habitat to the Variables of the Oceanography Using CVI Method (Coastal Vulnerability Index) in Trimulyo Mangrove Area, Genuk District, Semarang

NASA Astrophysics Data System (ADS)

Ahmad, Rifandi Raditya; Fuad, Muhammad

2018-02-01

Some functions of mangrove areas in coastal ecosystems as a green belt, because mangrove serves as a protector of the beach from the sea waves, as a good habitat for coastal biota and for nutrition supply. Decreased condition or degradation of mangrove habitat caused by several oceanographic factors. Mangrove habitats have some specific characteristics such as salinity, tides, and muddy substrates. Considering the role of mangrove area is very important, it is necessary to study about the potential of mangrove habitat so that the habitat level of mangrove habitat in the east coast of Semarang city is known. The purpose of this research is to obtain an index and condition of habitat of mangrove habitat at location of research based on tidal, salinity, substrate type, coastline change. Observation by using purposive method and calculation of habitat index value of mangrove habitat using CVI (Coastal Vulnerability Index) method with scores divided into 3 groups namely low, medium and high. The results showed that there is a zone of research belonging to the medium vulnerability category with the most influential variables is because there is abrasion that sweeps the mangrove substrate. Trimulyo mangrove habitat has high vulnerable variable of tidal frequency, then based on value variable Salinity is categorized as low vulnerability, whereas for mangrove habitat vulnerability based on variable type of substrate belong to low and medium vulnerability category. The CVI values of mangrove habitats divided into zones 1; 2; and 3 were found to varying values of 1.54; 3.79; 1.09, it indicates that there is a zone with the vulnerability of mangrove habitat at the study site belonging to low and medium vulnerability category.

Finite element analysis and experiment on high pressure apparatus with split cylinder

NASA Astrophysics Data System (ADS)

Zhao, Liang; Li, Mingzhe; Yang, Yunfei; Wang, Bolong; Li, Yi

2017-07-01

Ultra-high pressure belt-type die was designed with a large sample volume prism cavity and a split cylinder which was divided into eight segments to eliminate circumferential stress. The cylinder of this type die has no cambered surface on inner wall, and the inner hole is a hexagonal prism-type cavity. The divided bodies squeeze with each other, providing the massive support and lateral support effect of the cylinder. Simulation results indicate that the split cylinder with the prism cavity possesses much smaller stress and more uniform stress distribution. The split cylinder with the prism cavity has been shown to bear larger compressive stresses in radial, circumferential and axial directions due to its structure, and tungsten carbide is most effective in pure compression so this type cylinder could bear higher pressure. Experimental results prove that the high pressure apparatus with a prism-type cavity could bear higher pressure. The apparatus with a prism cavity could bear 52.2% more pressure than the belt-type die.

Recent Science Highlights of the Van Allen Probes Mission

NASA Astrophysics Data System (ADS)

Ukhorskiy, Aleksandr

2016-10-01

The morning of 30 August 2012 saw an Atlas 5 rocket launch NASA's second Living With a Star spacecraft mission, the twin Radiation Belt Storm Probes, into an elliptic orbit cutting through Earth's radiation belts. Renamed the Van Allen Probes soon after launch, the Probes are designed to determine how the highly variable populations of high-energy charged particles within the radiation belts, dangerous to astronauts and satellites, are created, respond to solar variations, and evolve in space environments. The Van Allen Probes mission extends beyond the practical considerations of the hazard's of Earth's space environment. Twentieth century observations of space and astrophysical systems throughout the solar system and out into the observable universe have shown that the processes that generate intense particle radiation within magnetized environments such as Earth's are universal. During its mission the Van Allen Probes verified and quantified previously suggested energization processes, discovered new energization mechanisms, revealed the critical importance of dynamic plasma injections into the innermost magnetosphere, and used uniquely capable instruments to reveal inner radiation belt features that were all but invisible to previous sensors. This paper gives a brief overview of the mission, presents some recent science highlights, and discusses plans for the extended mission.

Optical images of an exosolar planet 25 light-years from Earth.

PubMed

Kalas, Paul; Graham, James R; Chiang, Eugene; Fitzgerald, Michael P; Clampin, Mark; Kite, Edwin S; Stapelfeldt, Karl; Marois, Christian; Krist, John

2008-11-28

Fomalhaut, a bright star 7.7 parsecs (25 light-years) from Earth, harbors a belt of cold dust with a structure consistent with gravitational sculpting by an orbiting planet. Here, we present optical observations of an exoplanet candidate, Fomalhaut b. Fomalhaut b lies about 119 astronomical units (AU) from the star and 18 AU of the dust belt, matching predictions of its location. Hubble Space Telescope observations separated by 1.73 years reveal counterclockwise orbital motion. Dynamical models of the interaction between the planet and the belt indicate that the planet's mass is at most three times that of Jupiter; a higher mass would lead to gravitational disruption of the belt, matching predictions of its location. The flux detected at 0.8 mum is also consistent with that of a planet with mass no greater than a few times that of Jupiter. The brightness at 0.6 mum and the lack of detection at longer wavelengths suggest that the detected flux may include starlight reflected off a circumplanetary disk, with dimension comparable to the orbits of the Galilean satellites. We also observe variability of unknown origin at 0.6 mum.

Fold interference pattern in thick-skinned tectonics; a case study from the external Variscan belt of Eastern Anti-Atlas, Morocco

NASA Astrophysics Data System (ADS)

Baidder, L.; Michard, A.; Soulaimani, A.; Fekkak, A.; Eddebbi, A.; Rjimati, E.-C.; Raddi, Y.

2016-07-01

Conflicting views are expressed in literature concerning fold interference patterns in thick-skinned tectonic context (e.g. Central Anti-Atlas and Rocky Mountains-Colorado areas). Such patterns are referred to superimposed events with distinct orientation of compression or to the inversion of paleofaults with distinct strike during a single compressional event. The present work presents a case study where both types of control on fold interference are likely to be combined. The studied folds occur in the Tafilalt-Maider area of eastern Anti-Atlas, i.e. in the E-trending foreland fold belt of the Meseta Variscan Orogen in the area where it connects with the SE-trending, intracontinental Ougarta Variscan belt. Detail mapping documents unusual fold geometries such as sigmoidal and croissant- or boomerang-shaped folds associated with a complex major fault pattern. The folded rock material corresponds to a 6-8 km-thick Cambrian-Serpukhovian sedimentary pile that includes alternating competent and incompetent formations. The basement of the Paleozoic succession is made up of rhomboedric tilted blocks that formed during the Cambrian rifting of north-western Gondwana and the Devonian dislocation of the Sahara platform. The latter event is responsible for an array of paleofaults bounding the Maider and South Tafilalt Devonian-Early Carboniferous basins with respect to the adjoining high axes. The Variscan Orogeny began during the Bashkirian-Westphalian with a N-S direction of shortening that converted the NW-trending Ougnat-Ouzina paleogeographic high into a mega dextral shear zone. Folds developed on top of a moving mosaic of basement blocks, being oriented en echelon on the inverted paleofaults or above intensely sheared fault zones. However, a dominantly NE-SW compression responsible for the building of the Ougarta belt also affected the studied area, presumably during the latest Carboniferous-Early Permian. The resulting fold interference pattern and peculiar geometries (J. Tijekht croissant-shaped fold) would exemplify a dual control of deformation by both the variably oriented basement paleofaults and the evolution of the regional shortening direction with time.

The Conveyor Belt Problem and Newton's Third Law.

ERIC Educational Resources Information Center

Stewart, Maurice Bruce

1989-01-01

Shows how the thermal power developed by friction is exactly half the supplied power in the general case of a variable force of friction. Investigates the mechanism whereby one-half the input energy is dissipated as heat using mathematical expressions. (YP)

Does Noise From Shipping and Boat Traffic Affect Predator Vigilance in the European Common Hermit Crab?

PubMed

Nousek-McGregor, Anna E; Mei, Francesca Tee Liang

2016-01-01

The effect of noise on predator vigilance in Pagurus bernhardus was explored in this study. Latency of the first response, emergence time, and response type were measured from hermit crabs during continuous and variable vessel noise and two controls. The mean (±SE) response latency was longer for the noise treatments (continuous, 18.19 ± 2.78 s; variable, 11.39 ± 1.48 s) than for the controls (ambient, 7.21 ± 0.82 s; silent, 6.66 ± 0.95 s). Response type and emergence time were not significantly affected but were more variable during the noise treatments than during the controls. Noisy conditions may increase predation risk, suggesting potential fitness consequences for invertebrates.

Characteristics of Pitch Angle Distributions of 100s Kev Electrons in the Slot Region and Inner Radiation Belt­­­­­­­­

NASA Astrophysics Data System (ADS)

Zhao, H.; Li, X.; Blake, J. B.; Fennell, J.; Claudepierre, S. G.; Baker, D. N.; Jaynes, A. N.; Malaspina, D.

2014-12-01

The pitch angle distribution (PAD) of energetic electrons in the slot region and inner radiation belt received little attention in the past decades due to the lack of quality measurements. Using the state-of-art pitch-angle-resolved data from the Magnetic Electron Ion Spectrometer (MagEIS) instrument onboard the Van Allen Probes, a detailed analysis of 100s keV electron PADs below L =4 is performed, in which the PADs is categorized into three types: normal (flux peaking at 90°), cap (exceedingly peaking narrowly around 90°) and 90°-minimum (lower flux at 90°) PADs. By examining the characteristics of the PADs of 460 keV electrons for over a year, we find that the 90°-minimum PADs are generally present in the inner belt (L<2), while normal PADs dominate at L~3.5-4. In the region between, 90°-minimum PADs dominate during injection times and normal PADs dominate during quiet times. Cap PADs appear mostly at the decay phase of storms in the slot region and are likely caused by the pitch angle scattering of hiss waves. Fitting the normal PADs into sinnα form, the parameter n is much higher below L=3 than that in the outer belt and relatively constant in the inner belt but changes significantly in the slot region (2

International survey of seat belt use exemptions.

PubMed

Weiss, H; Sirin, H; Levine, J A; Sauber, E

2006-08-01

Substantial evidence of seatbelt efficacy has been shown by several studies, and it is widely recommended that motor vehicle occupants use properly fitted seat belts. However, some (but a heretofore unknown number of) countries with national seat belt laws permit various exemptions which may lower use rates. The aim of this study was to survey the variety of exemptions to national seat belt laws. This investigation relied on identifying respondents from national traffic safety agencies, other governmental and non-governmental organizations, Internet searches, personal contacts, and other sources. Questionnaires were deployed through a web based survey supplemented by email and postal versions. Responses were received from 30 countries of which 28 (93.7%) had a national seat belt law. About two thirds (63.7%) of the 28 national laws applied to both front and back seat passengers. The leading exemption types included vehicles made before a certain year (n = 13), antique vehicles (n = 12), military vehicles (n = 11), buses (n = 9), and emergency vehicles (n = 8). Most responding countries reported one or more specific categories of individuals as exempt including those with medical exemptions (n = 20), taxi drivers (n = 11), police (n = 9), emergency medical personnel (n = 8), physically disabled people (n = 6), and pregnant women (n = 6). Out of 26 responses to the question regarding current level of enforcement, 42.3% felt enforcement was "very good or good" and 57.7% characterized it as "fair or poor". This study represents one of the largest international traffic law surveys reported. Most national seatbelt laws offer perilous exemptions to a broad array of vehicle types and road user groups. These findings, coupled with concern over the level of enforcement in the majority of countries surveyed, suggest that international road safety efforts have a long way to go to improve coverage and enforcement of national seat belt laws.

International survey of seat belt use exemptions

PubMed Central

Weiss, H; Sirin, H; Levine, J A; Sauber, E

2006-01-01

Background Substantial evidence of seatbelt efficacy has been shown by several studies, and it is widely recommended that motor vehicle occupants use properly fitted seat belts. However, some (but a heretofore unknown number of) countries with national seat belt laws permit various exemptions which may lower use rates. The aim of this study was to survey the variety of exemptions to national seat belt laws. Methods This investigation relied on identifying respondents from national traffic safety agencies, other governmental and non‐governmental organizations, Internet searches, personal contacts, and other sources. Questionnaires were deployed through a web based survey supplemented by email and postal versions. Results Responses were received from 30 countries of which 28 (93.7%) had a national seat belt law. About two thirds (63.7%) of the 28 national laws applied to both front and back seat passengers. The leading exemption types included vehicles made before a certain year (n = 13), antique vehicles (n = 12), military vehicles (n = 11), buses (n = 9), and emergency vehicles (n = 8). Most responding countries reported one or more specific categories of individuals as exempt including those with medical exemptions (n = 20), taxi drivers (n = 11), police (n = 9), emergency medical personnel (n = 8), physically disabled people (n = 6), and pregnant women (n = 6). Out of 26 responses to the question regarding current level of enforcement, 42.3% felt enforcement was “very good or good” and 57.7% characterized it as “fair or poor”. Conclusions This study represents one of the largest international traffic law surveys reported. Most national seatbelt laws offer perilous exemptions to a broad array of vehicle types and road user groups. These findings, coupled with concern over the level of enforcement in the majority of countries surveyed, suggest that international road safety efforts have a long way to go to improve coverage and enforcement of national seat belt laws. PMID:16887949

46 CFR 35.30-20 - Emergency equipment-TB/ALL

Code of Federal Regulations, 2012 CFR

2012-10-01

... belt or a suitable harness. (3) One, Type II or Type III, flashlight constructed and marked in... Charge, Marine Inspection. (e) Lifelines shall be of steel or bronze wire rope. Steel wire rope shall be...

46 CFR 35.30-20 - Emergency equipment-TB/ALL

Code of Federal Regulations, 2010 CFR

2010-10-01

... belt or a suitable harness. (3) One, Type II or Type III, flashlight constructed and marked in... Charge, Marine Inspection. (e) Lifelines shall be of steel or bronze wire rope. Steel wire rope shall be...

46 CFR 35.30-20 - Emergency equipment-TB/ALL

Code of Federal Regulations, 2011 CFR

2011-10-01

... belt or a suitable harness. (3) One, Type II or Type III, flashlight constructed and marked in... Charge, Marine Inspection. (e) Lifelines shall be of steel or bronze wire rope. Steel wire rope shall be...

46 CFR 35.30-20 - Emergency equipment-TB/ALL

Code of Federal Regulations, 2014 CFR

2014-10-01

... belt or a suitable harness. (3) One, Type II or Type III, flashlight constructed and marked in... Charge, Marine Inspection. (e) Lifelines shall be of steel or bronze wire rope. Steel wire rope shall be...

46 CFR 35.30-20 - Emergency equipment-TB/ALL

Code of Federal Regulations, 2013 CFR

2013-10-01

... belt or a suitable harness. (3) One, Type II or Type III, flashlight constructed and marked in... Charge, Marine Inspection. (e) Lifelines shall be of steel or bronze wire rope. Steel wire rope shall be...

Depletion of the outer radiation belt during low activity years

NASA Astrophysics Data System (ADS)

Lazutin, Leonid L.

2017-05-01

During the years of high and moderate activity, the energetic flux of electrons at geostationary region increases compensated by the losses and as a result, the overall level of the population persists. The transitions from high to low intensity and back by 3-4 orders of magnitude are fast within hours and caused by the magnetic disturbances, storms and substorms. During the years of the low activity, the balance of increases and losses is violated; the whole flux of electrons is reduced. Particularly noticeable was the devastation of the outer belt during the minimum of 2009-2010 years. The slow type of decreases became most active. The transition from the fast type to the slow type of decreases was created by the prolonged periods of the low substorm activity. The slow type of intensity decreases is mostly probable caused by the losses on the magnetopause.

An inflatable belt system in the rear seat occupant environment: investigating feasibility and benefit in frontal impact sled tests with a 50th percentile male ATD

PubMed Central

Forman, Jason L.; Lopez-Valdes, Francisco J.; Dennis, Nate; Kent, Richard W.; Tanji, Hiromasa; Higuchi, Kazuo

2010-01-01

Frontal-impact airbag systems have the potential to provide a benefit to rear seat occupants by distributing restraining forces over the body in a manner not possible using belts alone. This study sought to investigate the effects of incorporating a belt-integrated airbag (“airbelt”) into a rear seat occupant restraint system. Frontal impact sled tests were performed with a Hybrid III 50th percentile male anthropomorphic test device (ATD) seated in the right-rear passenger position of a 2004 mid-sized sedan buck. Tests were performed at 48 km/h (20 g, 100 ms acceleration pulse) and 29 km/h (11 g, 100 ms). The restraints consisted of a 3-point belt system with a cylindrical airbag integrated into the upper portion of the shoulder belt. The airbag was tapered in shape, with a maximum diameter of 16 cm (at the shoulder) that decreased to 4 cm at the mid-chest. A 2.5 kN force-limiter was integrated into the shoulder-belt retractor, and a 2.3 kN pretensioner was present in the out-board anchor of the lap belt. Six ATD tests (three 48 km/h and three 29 km/h) were performed with the airbelt system. These were compared to previous frontal-impact, rear seat ATD tests with a standard (not-force-limited, not-pretensioned) 3-point belt system and a progressive force-limiting (peak 4.4 kN), pretensioning (FL+PT) 3-point belt system. In the 48 km/h tests, the airbelt resulted in significantly less (p<0.05, two-tailed Student’s t-test) posterior displacement of the sternum towards the spine (chest deflection) than both the standard and FL+PT belt systems (airbelt: average 13±1.1 mm standard deviation; standard belt: 33±2.3 mm; FL+PT belt: 23±2.6 mm). This was consistent with a significant reduction in the peak upper shoulder belt force (airbelt: 2.7±0.1 kN; standard belt: 8.7±0.3 kN; FL+PT belt: 4.4±0.1 kN), and was accompanied by a small increase in forward motion of the head (airbelt: 54±0.4 cm; standard belt: 45±1.3 cm; FL+PT belt: 47±1.1 cm) The airbelt system also significantly reduced the flexion moment in the lower neck (airbelt: 169±3.3 Nm; standard belt: 655±26 Nm; FL+PT belt: 308±19 Nm). Similar results were observed in the 29 km/h tests. These results suggest that this airbelt system may provide some benefit for adult rear seat occupants in frontal collisions, even in relatively low-speed impacts. Further study is needed to evaluate this type of restraint system for different size occupants (e.g., children), for out-of-position occupants, and with other occupant models (e.g., cadavers). PMID:21050596

Variable selection in discrete survival models including heterogeneity.

PubMed

Groll, Andreas; Tutz, Gerhard

2017-04-01

Several variable selection procedures are available for continuous time-to-event data. However, if time is measured in a discrete way and therefore many ties occur models for continuous time are inadequate. We propose penalized likelihood methods that perform efficient variable selection in discrete survival modeling with explicit modeling of the heterogeneity in the population. The method is based on a combination of ridge and lasso type penalties that are tailored to the case of discrete survival. The performance is studied in simulation studies and an application to the birth of the first child.

Seat belt pre-pretensioner effect on child-sized dummies during run-off-road events.

PubMed

Stockman, Isabelle; Bohman, Katarina; Jakobsson, Lotta

2017-05-29

Run-off-road events occur frequently and can result in severe consequences. Several potential injury-causing mechanisms can be observed in the diverse types of run-off-road events. Real-world data show that different types of environments, such as rough terrain, ditch types, and whether multiple events occur, may be important contributing factors to occupant injury. Though countermeasures addressing front seat occupants have been presented, studies on rear seat occupant retention in situations such as run-off-road events are lacking. The aim of this study was to investigate the seat belt pre-pretensioner effect on rear-seated child-sized anthropomorphic test devices (ATDs) during 2 different types of run-off-road events. The study was carried out using 2 test setups: a rig test with a vehicle rear seat mounted on a multi-axial robot simulating a road departure event into a side ditch and an in-vehicle test setup with a Volvo XC60 entering a side ditch with a grass slope, driving inside the ditch, and returning back to the road from the ditch. Potential subsequent rollovers or impacts were not included in the test setups. Three different ATDs were used. The Q6 and Q10 were seated on an integrated booster cushion and the Hybrid III (HIII) 5th percentile female was positioned directly on the seat. The seat belt retractor was equipped with a pre-pretensioner (electrical reversible retractor) with 3 force level settings. In addition, reference tests with the pre-pretensioner inactivated were run. Kinematics and the shoulder belt position were analyzed. In rig tests, the left-seated ATD was exposed to rapid inboard lateral loads relative to the vehicle. The displacement for each ATD was reduced when the pre-pretensioner was activated compared to tests when it was inactivated. Maximum inboard displacement occurred earlier in the event for all ATDs when the pre-pretensioner was activated. Shoulder belt slip-off occurred for the Q6 and Q10 in tests where the pre-pretensioner was inactivated. During in-vehicle tests, the left-seated ATD was exposed to an inboard movement when entering the road again after driving in the ditch. The maximum inboard head displacement was reduced in tests where the pre-pretensioner was activated compared to tests in which it was inactivated. During both test setups, the activation of the pre-pretensioner resulted in reduced lateral excursion of the Q6, Q10, and HIII 5th percentile female due to the shoulder belt remaining on the shoulder and supporting the side of the lower torso. The results provide new insights into the potential benefits of using a pre-pretensioner to reduce kinematic responses during complex run-off-road events through supporting the seat belt to remain on the shoulder. This study addresses potential countermeasures to improve real-world protection of rear-seated children, and it provides a broader perspective including the influence of precrash kinematics.

The fossilized size distribution of the main asteroid belt

NASA Astrophysics Data System (ADS)

Bottke, William F.; Durda, Daniel D.; Nesvorný, David; Jedicke, Robert; Morbidelli, Alessandro; Vokrouhlický, David; Levison, Hal

2005-05-01

Planet formation models suggest the primordial main belt experienced a short but intense period of collisional evolution shortly after the formation of planetary embryos. This period is believed to have lasted until Jupiter reached its full size, when dynamical processes (e.g., sweeping resonances, excitation via planetary embryos) ejected most planetesimals from the main belt zone. The few planetesimals left behind continued to undergo comminution at a reduced rate until the present day. We investigated how this scenario affects the main belt size distribution over Solar System history using a collisional evolution model (CoEM) that accounts for these events. CoEM does not explicitly include results from dynamical models, but instead treats the unknown size of the primordial main belt and the nature/timing of its dynamical depletion using innovative but approximate methods. Model constraints were provided by the observed size frequency distribution of the asteroid belt, the observed population of asteroid families, the cratered surface of differentiated Asteroid (4) Vesta, and the relatively constant crater production rate of the Earth and Moon over the last 3 Gyr. Using CoEM, we solved for both the shape of the initial main belt size distribution after accretion and the asteroid disruption scaling law QD∗. In contrast to previous efforts, we find our derived QD∗ function is very similar to results produced by numerical hydrocode simulations of asteroid impacts. Our best fit results suggest the asteroid belt experienced as much comminution over its early history as it has since it reached its low-mass state approximately 3.9-4.5 Ga. These results suggest the main belt's wavy-shaped size-frequency distribution is a "fossil" from this violent early epoch. We find that most diameter D≳120 km asteroids are primordial, with their physical properties likely determined during the accretion epoch. Conversely, most smaller asteroids are byproducts of fragmentation events. The observed changes in the asteroid spin rate and lightcurve distributions near D˜100-120 km are likely to be a byproduct of this difference. Estimates based on our results imply the primordial main belt population (in the form of D<1000 km bodies) was 150-250 times larger than it is today, in agreement with recent dynamical simulations.

THE EXTRAORDINARY MULTI-TAILED MAIN-BELT COMET P/2013 P5

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jewitt, David; Agarwal, Jessica; Weaver, Harold

2013-11-20

Hubble Space Telescope observations of main-belt comet P/2013 P5 reveal an extraordinary system of six dust tails that distinguish this object from any other. Observations two weeks apart show dramatic morphological change in the tails while providing no evidence for secular fading of the object as a whole. Each tail is associated with a unique ejection date, revealing continued, episodic mass loss from the 0.24 ± 0.04 km radius nucleus over the last five months. As an inner-belt asteroid and probable Flora family member, the object is likely to be highly metamorphosed and unlikely to contain ice. The protracted periodmore » of dust release appears inconsistent with an impact origin, but may be compatible with a body that is losing mass through a rotational instability. We suggest that P/2013 P5 has been accelerated to breakup speed by radiation torques.« less

KSC-2012-3682

NASA Image and Video Library

2012-07-05

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians prepare to rotate the Radiation Belt Storm Probes, or RBSP, spacecraft A so they can deploy the spacecraft's remaining three solar panels. Deploying these arrays is standard procedure to ensure they work properly on Earth before they head into space. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, four panels will continuously face the sun to provide constant power to its instruments. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Charisse Nahser

KSC-2012-3690

NASA Image and Video Library

2012-07-05

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians deploy one of four solar panels on the Radiation Belt Storm Probes, or RBSP, spacecraft A. Deploying these arrays is standard procedure to ensure they work properly on Earth before they head into space. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, the panels will continuously face the sun to provide constant power to its instruments. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Charisse Nahser

KSC-2012-3686

NASA Image and Video Library

2012-07-05

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians rotate the Radiation Belt Storm Probes, or RBSP, spacecraft A so they can deploy the spacecraft's remaining three solar panels. Deploying these arrays is standard procedure to ensure they work properly on Earth before they head into space. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, four panels will continuously face the sun to provide constant power to its instruments. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Charisse Nahser

KSC-2012-3692

NASA Image and Video Library

2012-07-05

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians deploy one of four solar panels on the Radiation Belt Storm Probes, or RBSP, spacecraft A. Deploying these arrays is standard procedure to ensure they work properly on Earth before they head into space. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, the panels will continuously face the sun to provide constant power to its instruments. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Charisse Nahser

KSC-2012-3691

NASA Image and Video Library

2012-07-05

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians deploy one of four solar panels on the Radiation Belt Storm Probes, or RBSP, spacecraft A. Deploying these arrays is standard procedure to ensure they work properly on Earth before they head into space. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, the panels will continuously face the sun to provide constant power to its instruments. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Charisse Nahser

KSC-2012-3683

NASA Image and Video Library

2012-07-05

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians rotate the Radiation Belt Storm Probes, or RBSP, spacecraft A so they can deploy the spacecraft's remaining three solar panels. Deploying these arrays is standard procedure to ensure they work properly on Earth before they head into space. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, four panels will continuously face the sun to provide constant power to its instruments. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Charisse Nahser

KSC-2012-3687

NASA Image and Video Library

2012-07-05

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians prepare to deploy the remaining three solar panels on the Radiation Belt Storm Probes, or RBSP, spacecraft A. Deploying these arrays is standard procedure to ensure they work properly on Earth before they head into space. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, four panels will continuously face the sun to provide constant power to its instruments. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Charisse Nahser

KSC-2012-3689

NASA Image and Video Library

2012-07-05

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians deploy one of four solar panels on the Radiation Belt Storm Probes, or RBSP, spacecraft A. Deploying these arrays is standard procedure to ensure they work properly on Earth before they head into space. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, the panels will continuously face the sun to provide constant power to its instruments. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Charisse Nahser

KSC-2012-3693

NASA Image and Video Library

2012-07-05

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians deploy one of four solar panels on the Radiation Belt Storm Probes, or RBSP, spacecraft A. Deploying these arrays is standard procedure to ensure they work properly on Earth before they head into space. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, the panels will continuously face the sun to provide constant power to its instruments. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Charisse Nahser

KSC-2012-3684

NASA Image and Video Library

2012-07-05

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians rotate the Radiation Belt Storm Probes, or RBSP, spacecraft A so they can deploy the spacecraft's remaining three solar panels. Deploying these arrays is standard procedure to ensure they work properly on Earth before they head into space. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, four panels will continuously face the sun to provide constant power to its instruments. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Charisse Nahser

KSC-2012-3685

NASA Image and Video Library

2012-07-05

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians rotate the Radiation Belt Storm Probes, or RBSP, spacecraft A so they can deploy the spacecraft's remaining three solar panels. Deploying these arrays is standard procedure to ensure they work properly on Earth before they head into space. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, four panels will continuously face the sun to provide constant power to its instruments. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Charisse Nahser

KSC-2012-3688

NASA Image and Video Library

2012-07-05

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians deploy one of four solar panels on the Radiation Belt Storm Probes, or RBSP, spacecraft A. Deploying these arrays is standard procedure to ensure they work properly on Earth before they head into space. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, the panels will continuously face the sun to provide constant power to its instruments. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Charisse Nahser

KSC-2012-4191

NASA Image and Video Library

2012-08-02

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians work on the Radiation Belt Storm Probes, or RBSP, spacecraft. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, the four solar panels will continuously face the sun to provide constant power to its instruments. The boom will provide data of the electric fields that energize radiation particles and modify the structure of the inner magnetosphere. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Kim Shiflett

KSC-2012-4196

NASA Image and Video Library

2012-08-02

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, NASA Administrator Charlie Bolden, at left, talks to technicians about the Radiation Belt Storm Probes, or RBSP, spacecraft. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, the four solar panels will continuously face the sun to provide constant power to its instruments. The boom will provide data of the electric fields that energize radiation particles and modify the structure of the inner magnetosphere. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Kim Shiflett

KSC-2012-4195

NASA Image and Video Library

2012-08-02

CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, NASA Administrator Charlie Bolden, center, talks to technicians about the Radiation Belt Storm Probes, or RBSP, spacecraft. NASA’s RBSP mission will help us understand the sun’s influence on Earth and near-Earth space by studying the Earth’s radiation belts on various scales of space and time. As the spacecraft orbits Earth, the four solar panels will continuously face the sun to provide constant power to its instruments. The boom will provide data of the electric fields that energize radiation particles and modify the structure of the inner magnetosphere. RBSP will begin its mission of exploration of Earth’s Van Allen radiation belts and the extremes of space weather after its launch aboard a United Launch Alliance Atlas V rocket. Launch is targeted for Aug. 23. For more information, visit http://www.nasa.gov/rbsp. Photo credit: NASA/Kim Shiflett

Investigating the source of near-relativistic and relativistic electrons in Earth's inner radiation belt

DOE PAGES

Turner, Drew Lawson; O'Brien, T. P.; Fennell, J. F.; ...

2017-01-30

Using observations from NASA's Van Allen Probes, we study the role of sudden particle enhancements at low L shells (SPELLS) as a source of inner radiation belt electrons. SPELLS events are characterized by electron intensity enhancements of approximately an order of magnitude or more in less than 1 day at L < 3. During quiet and average geomagnetic conditions, the phase space density radial distributions for fixed first and second adiabatic invariants are peaked at 2 < L < 3 for electrons ranging in energy from ~50 keV to ~1 MeV, indicating that slow inward radial diffusion is not themore » dominant source of inner belt electrons under quiet/average conditions. During SPELLS events, the evolution of electron distributions reveals an enhancement of phase space density that can exceed 3 orders of magnitude in the slot region and continues into the inner radiation belt, which is evidence that these events are an important—and potentially dominant—source of inner belt electrons. Electron fluxes from September 2012 through February 2016 reveal that SPELLS occur frequently (~2.5/month at 200 keV), but the number of observed events decreases exponentially with increasing electron energy for ≥100 keV. After SPELLS events, the slot region reforms due to slow energy-dependent decay over several day time scales, consistent with losses due to interactions with plasmaspheric hiss. Altogether, these results indicate that the peaked phase space density distributions in the inner electron radiation belt result from an “on/off,” geomagnetic-activity-dependent source from higher radial distances.« less

Investigating the source of near-relativistic and relativistic electrons in Earth's inner radiation belt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turner, Drew Lawson; O'Brien, T. P.; Fennell, J. F.

Using observations from NASA's Van Allen Probes, we study the role of sudden particle enhancements at low L shells (SPELLS) as a source of inner radiation belt electrons. SPELLS events are characterized by electron intensity enhancements of approximately an order of magnitude or more in less than 1 day at L < 3. During quiet and average geomagnetic conditions, the phase space density radial distributions for fixed first and second adiabatic invariants are peaked at 2 < L < 3 for electrons ranging in energy from ~50 keV to ~1 MeV, indicating that slow inward radial diffusion is not themore » dominant source of inner belt electrons under quiet/average conditions. During SPELLS events, the evolution of electron distributions reveals an enhancement of phase space density that can exceed 3 orders of magnitude in the slot region and continues into the inner radiation belt, which is evidence that these events are an important—and potentially dominant—source of inner belt electrons. Electron fluxes from September 2012 through February 2016 reveal that SPELLS occur frequently (~2.5/month at 200 keV), but the number of observed events decreases exponentially with increasing electron energy for ≥100 keV. After SPELLS events, the slot region reforms due to slow energy-dependent decay over several day time scales, consistent with losses due to interactions with plasmaspheric hiss. Altogether, these results indicate that the peaked phase space density distributions in the inner electron radiation belt result from an “on/off,” geomagnetic-activity-dependent source from higher radial distances.« less

A study of demographic, situational, and motivational factors affecting restraint usage in automobiles

DOT National Transportation Integrated Search

1983-02-01

Data were obtained from a nationwide telephone survey, extensive face-to-face interviews, and observations to assess the impact of demographic, situational, and motivational variables on seat belt use. The results revealed that almost one-third of th...

Recent Arecibo Radar Observations of Main-Belt Asteroids.

NASA Astrophysics Data System (ADS)

Shepard, Michael K.; Howell, Ellen; Nolan, Michael; Taylor, Patrick; Springmann, Alessondra; Giorgini, Jon; Benner, Lance; Magri, Christopher

2014-11-01

We recently observed main-belt asteroids 12 Victoria (Tholen S-class, Bus L-class), 246 Asporina (A-class), and 2035 Stearns with the S-band (12 cm) Arecibo radar. Signal-to-noise ratios for Asporina and Stearns were only strong enough for continuous-wave (CW) analysis. Signal-to-noise ratios for Victoria were high enough for delay-Doppler imaging. Stearns exhibited a high radar polarization ratio of unity, higher than any other main-belt E-class, but similar to near-Earth E-class asteroids [Benner et al. Icarus 198, 294-304, 2008; Shepard et al. Icarus 215, 547-551, 2011]. The A-class asteroids show spectral absorption features consistent with olivine and have been suggested as the source of pallasite meteorites or the rare brachinites [Cruikshank and Hartmann, Science 223, 281-283, 1984]. The radar cross-section measured for Asporina leads to a radar albedo estimate of 0.11, suggesting a low near-surface bulk density, and by inference, a low metal content. This suggests that the brachinites are a better analog for Asporina than the iron-rich pallasites. Victoria has been observed by radar in the past and the continuous-wave echoes suggest it has a large concavity or is a contact binary [Mitchell et al. Icarus 118, 105-131, 1995]. Our new imaging observations should determine which is more likely.

Rotund versus skinny orogens: Well-nourished or malnourished gold?

USGS Publications Warehouse

Goldfarb, R.J.; Groves, D.I.; Gardoll, S.

2001-01-01

Orogenic gold vein deposits require a particular conjunction of processes to form and be preserved, and their global distribution can be related to broad-scale, evolving tectonic processes throughout Earth history. A heterogeneous distribution of formation ages for these mineral deposits is marked by two major Precambrian peaks (2800-2555 Ma and 2100-1800 Ma), a singular lack of deposits for 1200 m.y. (1800-600 Ma), and relatively continuous formation since then (after 600 Ma). The older parts of the distribution relate to major episodes of continental growth, perhaps controlled by plume-influenced mantle overturn events, in the hotter early Earth (ca. 1800 Ma or earlier). This worldwide process allowed preservation of gold deposits in cratons, roughly equidimensional, large masses of buoyant continental crust. Evolution to a less episodic, more continuous, modern-style plate tectonic regime led to the accretion of volcano-sedimentary complexes as progressively younger linear orogenic belts sorrounding the margins of the more buoyant cratons. The susceptibility of these linear belts to uplift and erosion can explain the overall lack of orogenic gold deposits at 1800-600 Ma, their exposure in 600-50 Ma orogens, the increasing importance of placer deposits back through the Phanerozoic since ca. 100 Ma, and the absence of gold deposits in orogenic belts younger than ca. 50 Ma.

Quantitative Comparison of Mountain Belt Topographic Profiles on Earth and Venus

NASA Astrophysics Data System (ADS)

Stoddard, P. R.; Jurdy, D. M.

2016-12-01

Earth's mountain belts result from interactions between tectonic plates. Several styles of belts reflect the differing nature of those interactions: The narrow spine of the Andes results from subduction of the oceanic Nazca plate under the continental South American plate, the soaring Himalayas from the collision of India and Asia, the broad Rockies and Alaskan cordillera from multiple collisions, and the gentle Appalachians and Urals are remnants from ancient collisions. Venus' mountain chains - Maxwell, Freyja, Akna and Danu - surround Lakshmi Planum, a highland with an elevation of 4 km. These make up Ishtar Terra. Maxwell Montes ascends to over 11 km, the highest elevation on the planet. Freyja rises just over 7 km and Akna to about 6 km. The arcuate Danu belt on Ishtar's western boundary comes up to only 1.5 km over the planum. No other mountain belts exist on Venus. The origins of these venusian orogenic belts remain unknown. Earliest explanations invoked subduction around Lakshmi Planum; subsequent models included either up- or down-welling of the mantle, horizontal convergence, or crustal thickening. We quantitatively compare topography of Venus' mountain chains with Earth's for similarities and differences. Patterns may provide clues to the dynamics forming venusian orogenic belts. To do this, we find topographic profiles across the various chains, determine average profiles for each, and then correlate averages to establish the degree of similarity. From this correlation we construct a covariance matrix, diagonalized for eigenvalues, or principal components. These can be displayed as profiles. Correlations and principal components allow us to assess the degree of similarity and variability of the shapes of the average profiles. These analyses thus offer independent and objective modes of comparison; for example, with respect to terrestrial mid-ocean ridges, some Venus chasmata were shown to most closely resemble the ultra-slow Arctic spreading center.

Kinematic evolution of a regional-scale gravity-driven deepwater fold-and-thrust belt: The Lamu Basin case-history (East Africa)

NASA Astrophysics Data System (ADS)

Cruciani, F.; Barchi, M. R.; Koyi, H. A.; Porreca, M.

2017-08-01

The deepwater fold-and-thrust belts (DWFTBs) are geological structures recently explored thanks to advances in offshore seismic imaging by oil industry. In this study we present a kinematic analysis based on three balanced cross-sections of depth-converted, 2-D seismic profiles along the offshore Lamu Basin (East African passive margin). This margin is characterized by a regional-scale DWFTB (> 450 km long), which is the product of gravity-driven contraction on the shelf that exhibits complex structural styles and differing amount of shortening along strike. Net shortening is up to 48 km in the northern wider part of the fold-and-thrust belt (≈ 180 km), diminishing to < 15 km toward the south, where the belt is markedly narrower (≈ 50 km). The three balanced profiles show a shortening percentage around 20% (comparable with the maximum values documented in other gravity-driven DWFTBs), with a significant variability along dip: higher values are achieved in the outer (i.e. down-dip) portion of the system, dominated by basinward-verging, imbricate thrust sheets. Fold wavelength increases landward, where doubly-verging structures and symmetric detachment folds accommodate a lower amount of shortening. Similar to other cases, a linear and systematic relationship between sedimentary thickness and fold wavelength is observed. Reconstruction of the rate of shortening through time within a fold-and-thrust belt shows that after an early phase of slow activation (Late Cretaceous), > 95% of net shortening was produced in < 10 Myr (during Paleocene). During this acme phase, which followed a period of high sedimentation rate, thrusts were largely synchronous and the shortening rate reached a maximum value of 5 mm/yr. The kinematic evolution reconstructed in this study suggests that the structural evolution of gravity-driven fold-and-thrust belts differs from the accretionary wedges and the collisional fold-and-thrust belts, where thrusts propagate in-sequence and shortening is uniformly accommodated along dip.

First-order control of syntectonic sedimentation on crustal-scale structure of mountain belts

NASA Astrophysics Data System (ADS)

Erdős, Zoltán.; Huismans, Ritske S.; van der Beek, Peter

2015-07-01

The first-order characteristics of collisional mountain belts and the potential feedback with surface processes are predicted by critical taper theory. While the feedback between erosion and mountain belt structure has been fairly extensively studied, less attention has been given to the potential role of synorogenic deposition. For thin-skinned fold-and-thrust belts, recent studies indicate a strong control of syntectonic deposition on structure, as sedimentation tends to stabilize the thin-skinned wedge. However, the factors controlling basement deformation below fold-and-thrust belts, as evident, for example, in the Zagros Mountains or in the Swiss Alps, remain largely unknown. Previous work has suggested that such variations in orogenic structure may be explained by the thermotectonic "age" of the deforming lithosphere and hence its rheology. Here we demonstrate that sediment loading of the foreland basin area provides an additional control and may explain the variable basement involvement in orogenic belts. When examining the role of sedimentation, we identify two end-members: (1) sediment-starved orogenic systems with thick-skinned basement deformation in an axial orogenic core and thin-skinned deformation in the bordering forelands and (2) sediment-loaded orogens with thick packages of synorogenic deposits, derived from the axial basement zone, deposited on the surrounding foreland fold-and-thrust belts, and characterized by basement deformation below the foreland. Using high-resolution thermomechanical models, we demonstrate a strong feedback between deposition and crustal-scale thick-skinned deformation. Our results show that the loading effects of syntectonic sediments lead to long crustal-scale thrust sheets beneath the orogenic foreland and explain the contrasting characteristics of sediment-starved and sediment-loaded orogens, showing for the first time how both thin- and thick-skinned crustal deformations are linked to sediment deposition in these orogenic systems. We show that the observed model behavior is consistent with observations from a number of natural orogenic systems.

Global hydrobelts: improved reporting scale for water-related issues?

NASA Astrophysics Data System (ADS)

Meybeck, M.; Kummu, M.; Dürr, H. H.

2012-08-01

Questions related to water such as its availability, water needs or stress, or management, are mapped at various resolutions at the global scale. They are reported at many scales, mostly along political or continental boundaries. As such, they ignore the fundamental heterogeneity of the hydroclimate and the natural boundaries of the river basins. Here, we describe the continental landmasses according to eight global-scale hydrobelts strictly limited by river basins, defined at a 30' (0.5°) resolution. The belts were defined and delineated, based primarily on the annual average temperature (T) and runoff (q), to maximise interbelt differences and minimise intrabelt variability. The belts were further divided into 29 hydroregions based on continental limits. This new global puzzle defines homogeneous and near-contiguous entities with similar hydrological and thermal regimes, glacial and postglacial basin histories, endorheism distribution and sensitivity to climate variations. The Mid-Latitude, Dry and Subtropical belts have northern and southern analogues and a general symmetry can be observed for T and q between them. The Boreal and Equatorial belts are unique. The hydroregions (median size 4.7 Mkm2) contrast strongly, with the average q ranging between 6 and 1393 mm yr-1 and the average T between -9.7 and +26.3 °C. Unlike the hydroclimate, the population density between the North and South belts and between the continents varies greatly, resulting in pronounced differences between the belts with analogues in both hemispheres. The population density ranges from 0.7 to 0.8 p km-2 for the North American Boreal and some Australian hydroregions to 280 p km-2 for the Asian part of the Northern Mid-Latitude belt. The combination of population densities and hydroclimate features results in very specific expressions of water-related characteristics in each of the 29 hydroregions. Our initial tests suggest that hydrobelt and hydroregion divisions are often more appropriate for water-relative global analysis and reporting than conventional continental or political divisions.

The 131-134 Ma A-type granites from northern Zhejiang Province, South China: Implications for partial melting of the Neoproterozoic lower crust

NASA Astrophysics Data System (ADS)

Hu, Qinghai; Yu, Kaizhang; Liu, Yongsheng; Hu, Zhaochu; Zong, Keqing

2017-12-01

Although Mesozoic granites are widely distributed in the Gan-Hang Belt in Southeast China, their petrogenesis and geodynamic settings are still matters of dispute. Here, the major and trace elements, Sr-Nd isotopic compositions, zircon U-Pb dating and Hf isotopes of three late Mesozoic granite plutons from Machebu, Shenzhongwu and Daixi in northern Zhejiang Province were analyzed to investigate their petrogenesis. These granite plutons are featured by an A2-type granite geochemical signature (e.g., high SiO2 (71 to 78 wt.%), total alkalis (Na2O + K2O = 7.57 to 9.12 wt.%), rare earth elements (total REE = 174 to 519 ppm) and HFSE contents, with mostly high FeOT/(FeOT + MgO) (0.82 to 0.93) and Ga/Al ratios (2.49 to 5.07) and low Ce4 +/Ce3 + ratios in zircons (1 to 90)), suggesting they were formed in an extensional tectonic setting. Combining whole rock Zr contents, mineral assemblages and the An content of plagioclase, it was suggested that these granites could have formed at a high temperature (> 850 °C) with a low H2O content ( 2.5 wt.%). Assuming the granite with the lowest SiO2 and high CaO contents as the "primary granite melt", the melting pressure was estimated to be 2.5 kbar based on model calculations using MELTs. Taking into account the effect of plagioclase fractional crystallization during the granite emplacement into shallow crustal levels, the initial melting pressure could be > 2.5 kbar at the stable field of plagioclase. This agrees well with the very low and variable Sr and Eu contents of these granite plutons. Zircon U-Pb dating yields a weighted mean 206Pb/238U age of 130.9 ± 1.0 Ma for the Machebu granite, 134.4 ± 2.1 Ma for the Shenzhongwu granite and 131.9 ± 1.2 Ma for the Daixi granite. The εHf(t) values of the zircons in these plutons gradually increase from southwest to northeast, i.e., from - 14.5 - 3.5 for the Machebu granite to - 1.5 - 0.2 for the Shenzhongwu granite and from 5.1 8.6 for the Daixi granite, suggesting the origin of different parent rocks. These granites have two-stage Nd model (TDM2(Nd)) ages of 1099 Ma-838 Ma, and zircons from these granites and the Neoproterozoic basement in the Gan-Hang Belt plot on the same evolutionary trend in the εHf(t)-age diagram. It is interesting to note that the collection of literature data shows a positive correlation between SiO2 and εNd(t) for the late Mesozoic A-granites in the Gan-Hang Belt, and the Neoproterozoic A-granites in the Gan-Hang Belt cluster in two groups of the high-SiO2-εNd(t) group and low-εNd(t) group. The positive correlation of SiO2-εNd(t) demonstrated by the late Mesozoic A-granites can be well explained by a high-degree of melting of mixtures between the two groups of Neoproterozoic A-granites. We thus suggest that the late Mesozoic A-type granites in the Gan-Hang Belt could have been derived from the rejuvenated Neoproterozoic rocks rather than directly from the Mesoproterozoic metamorphic basement as a result of subduction.

Comparison of lighting activity and inner radiation belt particle fluxes perturbations

NASA Astrophysics Data System (ADS)

Martinez Calderon, C.; Bortnik, J.; Li, W.; Spence, H. E.; Rodger, C. J.

2016-12-01

Lightning discharges are known to inject whistlers into the inner magnetosphere over a wide range of latitudes around their source. When a discharge occurs, it radiates electromagnetic energy, some of which propagates in the whistler-mode wave through the ionospheric plasma travelling away from the Earth. Previous studies have discussed the effects of whistler-induced electron precipitation and radiation belt losses associated with lightning but there has been little research on the long term effects of these precipitation on the inner radiation belts [Rodger et al. (2004), Clilverd et al. (2004)].Here, we use data from the World Wide Lightning Location Network (WWLLN), which has continuously monitored global lightning since 2004, to examine one year of lightning data and locate the L-shells with high lighting activity. We use Van Allen Probes' Energetic Particle, Composition, and Thermal Plasma Suite (ECT) from both satellites (RBSP-A/B) to measure electron fluxes in the inner radiation belt at the L-shells of interest. We compare these fluxes to a globally-integrated count of lightning strikes and investigate the relationship between global lightning occurrence and RBSP electron fluxes. We examine several factors, such as different energy ranges, timescales ranging from a few weeks to the entire year and seasonal changes in order to quantify the loss process driven by lightning in the inner radiation belts.

Exfoliated β-Ga2O3 nano-belt field-effect transistors for air-stable high power and high temperature electronics.

PubMed

Kim, Janghyuk; Oh, Sooyeoun; Mastro, Michael A; Kim, Jihyun

2016-06-21

This study demonstrated the exfoliation of a two-dimensional (2D) β-Ga2O3 nano-belt and subsequent processing into a thin film transistor structure. This mechanical exfoliation and transfer method produces β-Ga2O3 nano-belts with a pristine surface as well as a continuous defect-free interface with the SiO2/Si substrate. This β-Ga2O3 nano-belt based transistor displayed an on/off ratio that increased from approximately 10(4) to 10(7) over the operating temperature range of 20 °C to 250 °C. No electrical breakdown was observed in our measurements up to VDS = +40 V and VGS = -60 V between 25 °C and 250 °C. Additionally, the electrical characteristics were not degraded after a month-long storage in ambient air. The demonstration of high-temperature/high-voltage operation of quasi-2D β-Ga2O3 nano-belts contrasts with traditional 2D materials such as transition metal dichalcogenides that intrinsically have limited temperature and power operational envelopes owing to their narrow bandgap. This work motivates the application of 2D β-Ga2O3 to high power nano-electronic devices for harsh environments such as high temperature chemical sensors and photodetectors as well as the miniaturization of power circuits and cooling systems in nano-electronics.

Redefining the Australian Anthrax Belt: Modeling the Ecological Niche and Predicting the Geographic Distribution of Bacillus anthracis

PubMed Central

Barro, Alassane S.; Fegan, Mark; Moloney, Barbara; Porter, Kelly; Muller, Janine; Warner, Simone; Blackburn, Jason K.

2016-01-01

The ecology and distribution of B. anthracis in Australia is not well understood, despite the continued occurrence of anthrax outbreaks in the eastern states of the country. Efforts to estimate the spatial extent of the risk of disease have been limited to a qualitative definition of an anthrax belt extending from southeast Queensland through the centre of New South Wales and into northern Victoria. This definition of the anthrax belt does not consider the role of environmental conditions in the distribution of B. anthracis. Here, we used the genetic algorithm for rule-set prediction model system (GARP), historical anthrax outbreaks and environmental data to model the ecological niche of B. anthracis and predict its potential geographic distribution in Australia. Our models reveal the niche of B. anthracis in Australia is characterized by a narrow range of ecological conditions concentrated in two disjunct corridors. The most dominant corridor, used to redefine a new anthrax belt, parallels the Eastern Highlands and runs from north Victoria to central east Queensland through the centre of New South Wales. This study has redefined the anthrax belt in eastern Australia and provides insights about the ecological factors that limit the distribution of B. anthracis at the continental scale for Australia. The geographic distributions identified can help inform anthrax surveillance strategies by public and veterinary health agencies. PMID:27280981

Redefining the Australian Anthrax Belt: Modeling the Ecological Niche and Predicting the Geographic Distribution of Bacillus anthracis.

PubMed

Barro, Alassane S; Fegan, Mark; Moloney, Barbara; Porter, Kelly; Muller, Janine; Warner, Simone; Blackburn, Jason K

2016-06-01

The ecology and distribution of B. anthracis in Australia is not well understood, despite the continued occurrence of anthrax outbreaks in the eastern states of the country. Efforts to estimate the spatial extent of the risk of disease have been limited to a qualitative definition of an anthrax belt extending from southeast Queensland through the centre of New South Wales and into northern Victoria. This definition of the anthrax belt does not consider the role of environmental conditions in the distribution of B. anthracis. Here, we used the genetic algorithm for rule-set prediction model system (GARP), historical anthrax outbreaks and environmental data to model the ecological niche of B. anthracis and predict its potential geographic distribution in Australia. Our models reveal the niche of B. anthracis in Australia is characterized by a narrow range of ecological conditions concentrated in two disjunct corridors. The most dominant corridor, used to redefine a new anthrax belt, parallels the Eastern Highlands and runs from north Victoria to central east Queensland through the centre of New South Wales. This study has redefined the anthrax belt in eastern Australia and provides insights about the ecological factors that limit the distribution of B. anthracis at the continental scale for Australia. The geographic distributions identified can help inform anthrax surveillance strategies by public and veterinary health agencies.

Valemount strain zone: A dextral oblique-slip thrust system linking the Rocky Mountain and Omineca belts of the southeastern Canadian Cordillera

NASA Astrophysics Data System (ADS)

McDonough, Michael R.; Simony, Philip S.

1989-03-01

The Valemount strain zone (VSZ), a narrow zone of high orogen-parallel (OP) strain in pebble conglomerate of the Late Proterozoic Miette Group, is the footwall expression of a thrust fault on the western edge of the Rocky Mountain belt, marking the eastern limit of a wide zone of OP fabrics distributed through the Omineca crystalline and western Rocky Mountain belts of the southeastern Canadian Cordillera. Kinematic indicators from the VSZ and the adjacent Bear Foot thrust zone show that both thrust and dextral displacement are associated with folding and thrust motion in the Rocky Mountains, thereby linking the southern Rocky Mountain belt to the Omineca belt by an oblique-slip thrust regime that is tectonically unrelated to the Southern Rocky Mountain Trench. Transverse shortening of thrust sheets and subsequent distribution of OP shear are invoked to explain the parallelism of stretching lineations and fold axes. Strain and kinematic data and the thrust-belt geometry of the VSZ suggest that OP lineations are a product of a large amount of transverse shortening during slightly oblique A-type subduction. Thus, OP lineations are not representative of relative plate motions between North America and accreted terranes, but probably are a function of footwall buttressing of thrust sheets, a mechanism that may be widely applicable to the internal zones of collisional orogens.

Geochemical evidence for a brooks range mineral belt, Alaska

USGS Publications Warehouse

Marsh, S.P.; Cathrall, J.B.

1981-01-01

Geochemical studies in the central Brooks Range, Alaska, delineate a regional, structurally controlled mineral belt in east-west-trending metamorphic rocks and adjacent metasedimentary rocks. The mineral belt extends eastward from the Ambler River quadrangle to the Chandalar and Philip Smith quadrangles, Alaska, from 147?? to 156??W. longitude, a distance of more than 375 km, and spans a width from 67?? to 69??N. latitude, a distance of more than 222 km. Within this belt are several occurrences of copper and molybdenum mineralization associated with meta-igneous, metasedimentary, and metavolcanic rocks; the geochemical study delineates target areas for additional occurrences. A total of 4677 stream-sediment and 2286 panned-concentrate samples were collected in the central Brooks Range, Alaska, from 1975 to 1979. The -80 mesh ( 2.86) nonmagnetic fraction of the panned concentrates from stream sediment were analyzed by semiquantitative spectrographic methods. Two geochemical suites were recognized in this investigation; a base-metal suite of copper-lead-zinc and a molybdenum suite of molybdenum-tin-tungsten. These suites suggest several types of mineralization within the metamorphic belt. Anomalies in molybdenum with associated Cu and W suggest a potential porphyry molybdenum system associated with meta-igneous rocks. This regional study indicates that areas of metaigneous rocks in the central metamorphic belt are target areas for potential mineralized porphyry systems and that areas of metavolcanic rocks are target areas for potential massive sulfide mineralization. ?? 1981.

Facile synthesis, phase transition, optical switching and oxidation resistance properties of belt-like VO{sub 2}(A) and VO{sub 2}(M) with a rectangular cross section

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yifu; Huang, Yanfen; Zhang, Juecheng

2012-08-15

Highlights: ► Belt-like VO{sub 2}(A) with a rectangular cross section was synthesized. ► The formation mechanism of belt-like VO{sub 2}(A) was proposed. ► Belt-like VO{sub 2}(M) was prepared by the irreversible transformation of VO{sub 2}(A). ► VO{sub 2}(A) and VO{sub 2}(M) can be used as the optical switching materials. ► VO{sub 2}(A) and VO{sub 2}(M) have good oxidation resistance below 400 °C in air. -- Abstract: Belt-like VO{sub 2}(A) with a rectangular cross section (VA-RCS) was successfully synthesized using V{sub 2}O{sub 5}, H{sub 2}C{sub 2}O{sub 4}·2H{sub 2}O and H{sub 2}O as the starting materials by a facile hydrothermal approach. Somemore » synthetic parameters, such as, the reaction time, reaction temperature and concentration of H{sub 2}C{sub 2}O{sub 4}·2H{sub 2}O, were systematically investigated to control the fabrication of belt-like VA-RCS. The formation mechanism of belt-like VA-RCS was proposed. Subsequently, belt-like VO{sub 2}(M) with a rectangular cross section (VM-RCS) was prepared by the irreversible transformation of VA-RCS at 700 °C for 2 h under the inert atmosphere. The phase transition temperature (T{sub c}) of VA-RCS and VM-RCS was evaluated by DSC test. The optical switching properties of VA-RCS and VM-RCS were studied by the variable-temperature infrared spectra, and it was found that the as-obtained VA-RCS and VM-RCS could be used as the optical switching materials. Furthermore, the oxidation resistance properties of VA-RCS and VM-RCS were investigated by TGA, indicating that they have good thermal stability and oxidation resistance below 400 °C in air.« less

Combined steam-ultrasound treatment of 2 seconds achieves significant high aerobic count and Enterobacteriaceae reduction on naturally contaminated food boxes, crates, conveyor belts, and meat knives.

PubMed

Musavian, Hanieh S; Butt, Tariq M; Larsen, Annette Baltzer; Krebs, Niels

2015-02-01

Food contact surfaces require rigorous sanitation procedures for decontamination, although these methods very often fail to efficiently clean and disinfect surfaces that are visibly contaminated with food residues and possible biofilms. In this study, the results of a short treatment (1 to 2 s) of combined steam (95°C) and ultrasound (SonoSteam) of industrial fish and meat transportation boxes and live-chicken transportation crates naturally contaminated with food and fecal residues were investigated. Aerobic counts of 5.0 to 6.0 log CFU/24 cm(2) and an Enterobacteriaceae spp. level of 2.0 CFU/24 cm(2) were found on the surfaces prior to the treatment. After 1 s of treatment, the aerobic counts were significantly (P < 0.0001) reduced, and within 2 s, reductions below the detection limit (<10 CFU) were reached. Enterobacteriaceae spp. were reduced to a level below the detection limit with only 1 s of treatment. Two seconds of steam-ultrasound treatment was also applied on two different types of plastic modular conveyor belts with hinge pins and one type of flat flexible rubber belt, all visibly contaminated with food residues. The aerobic counts of 3.0 to 5.0 CFU/50 cm(2) were significantly (P < 0.05) reduced, while Enterobacteriaceae spp. were reduced to a level below the detection limit. Industrial meat knives were contaminated with aerobic counts of 6.0 log CFU/5 cm(2) on the handle and 5.2 log CFU/14 cm(2) on the steel. The level of Enterobacteriaceae spp. contamination was approximately 2.5 log CFU on the handle and steel. Two seconds of steam-ultrasound treatment reduced the aerobic counts and Enterobacteriaceae spp. to levels below the detection limit on both handle and steel. This study shows that the steam-ultrasound treatment may be an effective replacement for disinfection processes and that it can be used for continuous disinfection at fast process lines. However, the treatment may not be able to replace efficient cleaning processes used to remove high loads of debris.

Fractal fluctuations in spatiotemporal variables when walking on a self-paced treadmill.

PubMed

Choi, Jin-Seung; Kang, Dong-Won; Seo, Jeong-Woo; Tack, Gye-Rae

2017-12-08

This study investigated the fractal dynamic properties of stride time (ST), stride length (SL) and stride speed (SS) during walking on a self-paced treadmill (STM) in which the belt speed is automatically controlled by the walking speed. Twelve healthy young subjects participated in the study. The subjects walked at their preferred walking speed under four conditions: STM, STM with a metronome (STM+met), fixed-speed (conventional) treadmill (FTM), and FTM with a metronome (FTM+met). To compare the fractal dynamics between conditions, the mean, variability, and fractal dynamics of ST, SL, and SS were compared. Moreover, the relationship among the variables was examined under each walking condition using three types of surrogates. The mean values of all variables did not differ between the two treadmills, and the variability of all variables was generally larger for STM than for FTM. The use of a metronome resulted in a decrease in variability in ST and SS for all conditions. The fractal dynamic characteristics of SS were maintained with STM, in contrast to FTM, and only the fractal dynamic characteristics of ST disappeared when using a metronome. In addition, the fractal dynamic patterns of the cross-correlated surrogate results were identical to those of all variables for the two treadmills. In terms of the fractal dynamic properties, STM walking was generally closer to overground walking than FTM walking. Although further research is needed, the present results will be useful in research on gait fractal dynamics and rehabilitation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Safety belt and mobile phone usage in vehicles in Barcelona (Spain).

PubMed

Martínez-Sánchez, Jose M; Curto, Ariadna; Fu, Marcela; Martínez, Cristina; Sureda, Xisca; Ballbè, Montse; Fernández, Esteve

2014-01-01

To describe the prevalence and correlates of safety belt and mobile phone usage in vehicles in the city of Barcelona (Spain). We performed a study using direct observation with a cross-sectional design. We selected 2,442 private cars, commercial vehicles, and taxis from all districts of Barcelona. The prevalence of people not wearing safety belt was 10.5% among drivers, 4.6% among front seat passengers, and 32.2% among some of the rear passengers. It was higher among the passengers than among the drivers, regardless of the type of the vehicle. The prevalence of mobile phone usage while driving during a moment of the trip was 3.8%. Our study shows noticeably high prevalence of people not wearing safety belt in the rear seats. Moreover, four out of one hundred drivers still use the mobile phone while driving during a moment of the trip. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

Formation of energetic electron butterfly distributions by magnetosonic waves via Landau resonance

DOE PAGES

Li, Jinxing; Ni, Binbin; Ma, Qianli; ...

2016-03-06

Radiation belt electrons can exhibit different types of pitch angle distributions in response to various magnetospheric processes. Butterfly distributions, characterized by flux minima at pitch angles around 90°, are broadly observed in both the outer and inner belts and the slot region. Butterfly distributions close to the outer magnetospheric boundary have been attributed to drift shell splitting and losses to the magnetopause. However, their occurrence in the inner belt and the slot region has hitherto not been resolved. In this study, by analyzing the particle and wave data collected by the Van Allen Probes during a geomagnetic storm, we combinemore » test particle calculations and Fokker-Planck simulations to reveal that scattering by equatorial magnetosonic waves is a significant cause for the formation of energetic electron butterfly distributions in the inner magnetosphere. Finally, another event shows that a large-amplitude magnetosonic wave in the outer belt can create electron butterfly distributions in just a few minutes.« less

Crustal shortening and thickening in Neoarchean granite-greenstone belts: A case study from the link between the ∼2.7 Ga Elu and Hope Bay belts, northeast Slave craton, Canada

NASA Astrophysics Data System (ADS)

Mvondo, Hubert; Lentz, Dave; Bardoux, Marc

2017-11-01

The Elu Link between the ∼2.7 Ga Hope Bay and Elu belts in the northeast Bathurst Block of the Slave craton comprises supracrustal and intrusive rocks variably deformed by three tectono-metamorphic events (D1-D3). The geometry of D1 structures formed during prograde metamorphism is uncertain, because of subsequent overprint. D2 occurred in two stages predating (D2a) and postdating (D2b) peak metamorphism. D1 and D2a were thrusting events inferred from peak metamorphic pressures of ∼6.7 kbar (670 MPa) retained by a garnet orthogneiss. The latter is diagnostic of thrust tectonism in Archean granite-greenstone belts with no characteristic thrust faults. Unlike D2a, D2b was a vertical general flattening event prevailing during the formation of magmatic domes and interdomal folds that form the main strain patterns of the belts. This was followed by the formation of buckled F3 folds associated with D3 vertical constriction. The switch from thrust to vertical tectonics during peak metamorphism and subsequent deformation resulted in intense recrystallization that explains the poor preservation and scarcity of early-formed shears, including thrust zones. A tectonic process, combining D1+D2a thrust stacking, sagduction, and vertical stretching during D2b and D3, is suggested to explain crustal thickening in the Elu Link and terrains of similar ages.

The impact of airbags and seat belts on the incidence and severity of maxillofacial injuries in automobile accidents in New York State.

PubMed

Mouzakes, J; Koltai, P J; Kuhar, S; Bernstein, D S; Wing, P; Salsberg, E

2001-10-01

To evaluate the effect driver-side and passenger-side airbags have had on the incidence and severity of maxillofacial trauma in victims of automobile accidents. Retrospective analysis of all automobile (passenger cars and light trucks) accidents reported in 1994. New York State. Of the 595910 individuals involved in motor vehicle accidents in New York in 1994, 377054 individuals were initially selected from accidents involving cars and light trucks. Of this subset, 164238 drivers and 62755 right front passengers were selected for analysis. Each case is described in a single record with approximately 100 variables describing the accident, eg, vehicle, safety equipment installed and utilized or deployed, occupant position, patient demographics, International Classification of Diseases, Ninth Revision, Clinical Modification (ICD-9-CM) diagnoses, and procedural treatments rendered. A maxillofacial trauma severity scale was devised, based on the ICD-9-CM diagnoses. Individuals using airbags and seat belts sustained facial injuries at a rate of 1 in 449, compared with a rate of 1 in 40 for individuals who did not use seat belts or airbags (P<.001). Those using airbags alone sustained facial injuries at the intermediate rate of 1 in 148, and victims using seat belts without airbags demonstrated an injury rate of 1 in 217 (P<.001). Use of driver-side airbags, when combined with use of seat belts, has resulted in a decrease in the incidence and severity of maxillofacial trauma.

Clustering and variable selection in the presence of mixed variable types and missing data.

PubMed

Storlie, C B; Myers, S M; Katusic, S K; Weaver, A L; Voigt, R G; Croarkin, P E; Stoeckel, R E; Port, J D

2018-05-17

We consider the problem of model-based clustering in the presence of many correlated, mixed continuous, and discrete variables, some of which may have missing values. Discrete variables are treated with a latent continuous variable approach, and the Dirichlet process is used to construct a mixture model with an unknown number of components. Variable selection is also performed to identify the variables that are most influential for determining cluster membership. The work is motivated by the need to cluster patients thought to potentially have autism spectrum disorder on the basis of many cognitive and/or behavioral test scores. There are a modest number of patients (486) in the data set along with many (55) test score variables (many of which are discrete valued and/or missing). The goal of the work is to (1) cluster these patients into similar groups to help identify those with similar clinical presentation and (2) identify a sparse subset of tests that inform the clusters in order to eliminate unnecessary testing. The proposed approach compares very favorably with other methods via simulation of problems of this type. The results of the autism spectrum disorder analysis suggested 3 clusters to be most likely, while only 4 test scores had high (>0.5) posterior probability of being informative. This will result in much more efficient and informative testing. The need to cluster observations on the basis of many correlated, continuous/discrete variables with missing values is a common problem in the health sciences as well as in many other disciplines. Copyright © 2018 John Wiley & Sons, Ltd.

Geometry and Kinematics of the Lamu Basin Deep-Water Fold-and-Thrust Belt (East Africa)

NASA Astrophysics Data System (ADS)

Barchi, Massimiliano R.; Cruciani, Francesco; Porreca, Massimiliano

2016-04-01

Even if most thin-skinned fold-and-thrust belt are generated at convergent plate boundaries, in the last decades advances in seismic exploration and acquisition of large datasets have shown that they are also notably widespread along continental passive margins, driven by gravity processes in deep-water areas. In this study a composite set of modern and vintage reprocessed seismic reflection profiles is used to investigate the internal structure and kinematic evolution of the Lamu Basin Deep-Water Fold-and-Trust Belt (DW-FTB). The Lamu Basin is an example of giant-scale, gravity driven compressional belt developed in Late Cretaceous-Early Tertiary along a still poorly explored sector of the East-African continental margin, at the Kenya-Somalia border. The compressional domain extends longitudinally for more than 450 km, is up to 180 km wide and shows remarkable structural complexity both along strike and along dip. The external part is dominated by ocean-verging imbricate thrusts, above a gently landward-dipping basal detachment. The internal part is characterised by almost symmetrical detachment folds and double verging structures, sustaining bowl-shaped syn-tectonic basins. Here the basal detachment surface is almost flat. The mean fold wavelength displays a progressive landward increase, from 2.5 km, at the toe of the belt, to about 10 km. This structural variability is thought to be related to the lateral variation of the section under shortening and particularly to the different thickness of the Early Cretaceous shaly unit involved in the deformations, increasing landward from about 400 m to more than 1 km. Through the sequential restoration of regional cross-sections, we evaluated that the northern portion of the thrust belt experienced a shortening of almost 50 km (corresponding to 20%), with a shortening rate (during the Late Cretaceous-Paleocene main event) of about 3.5 mm/yr. Under many respects, the dimensions and internal structure of this thrust belt are comparable to that of analogue-scaled structures, developed at convergent plate boundaries, e.g. the foreland fold-and-trust belts. However, its kinematic evolution shows some peculiar characters: shortening seems largely synchronous across the whole thrust belt and the maximum shortening is achieved in its frontal part (toe thrust), diminishing landward.

Potential Jupiter-Family comet contamination of the main asteroid belt

NASA Astrophysics Data System (ADS)

Hsieh, Henry H.; Haghighipour, Nader

2016-10-01

We present the results of "snapshot" numerical integrations of test particles representing comet-like and asteroid-like objects in the inner Solar System aimed at investigating the short-term dynamical evolution of objects close to the dynamical boundary between asteroids and comets as defined by the Tisserand parameter with respect to Jupiter, TJ (i.e., TJ = 3). As expected, we find that TJ for individual test particles is not always a reliable indicator of initial orbit types. Furthermore, we find that a few percent of test particles with comet-like starting elements (i.e., similar to those of Jupiter-family comets) reach main-belt-like orbits (at least temporarily) during our 2 Myr integrations, even without the inclusion of non-gravitational forces, apparently via a combination of gravitational interactions with the terrestrial planets and temporary trapping by mean-motion resonances with Jupiter. We estimate that the fraction of real Jupiter-family comets occasionally reaching main-belt-like orbits on Myr timescales could be on the order of ∼ 0.1-1%, although the fraction that remain on such orbits for appreciable lengths of time is certainly far lower. For this reason, the number of JFC-like interlopers in the main-belt population at any given time is likely to be small, but still non-zero, a finding with significant implications for efforts to use apparently icy yet dynamically asteroidal main-belt comets as tracers of the primordial distribution of volatile material in the inner Solar System. The test particles with comet-like starting orbital elements that transition onto main-belt-like orbits in our integrations appear to be largely prevented from reaching low eccentricity, low inclination orbits, suggesting that the real-world population of main-belt objects with both low eccentricities and inclinations may be largely free of this potential occasional Jupiter-family comet contamination. We therefore find that low-eccentricity, low-inclination main-belt comets may provide a more reliable means for tracing the primordial ice content of the main asteroid belt than the main-belt comet population as a whole.

Old and New Ideas for Data Screening and Assumption Testing for Exploratory and Confirmatory Factor Analysis

PubMed Central

Flora, David B.; LaBrish, Cathy; Chalmers, R. Philip

2011-01-01

We provide a basic review of the data screening and assumption testing issues relevant to exploratory and confirmatory factor analysis along with practical advice for conducting analyses that are sensitive to these concerns. Historically, factor analysis was developed for explaining the relationships among many continuous test scores, which led to the expression of the common factor model as a multivariate linear regression model with observed, continuous variables serving as dependent variables, and unobserved factors as the independent, explanatory variables. Thus, we begin our paper with a review of the assumptions for the common factor model and data screening issues as they pertain to the factor analysis of continuous observed variables. In particular, we describe how principles from regression diagnostics also apply to factor analysis. Next, because modern applications of factor analysis frequently involve the analysis of the individual items from a single test or questionnaire, an important focus of this paper is the factor analysis of items. Although the traditional linear factor model is well-suited to the analysis of continuously distributed variables, commonly used item types, including Likert-type items, almost always produce dichotomous or ordered categorical variables. We describe how relationships among such items are often not well described by product-moment correlations, which has clear ramifications for the traditional linear factor analysis. An alternative, non-linear factor analysis using polychoric correlations has become more readily available to applied researchers and thus more popular. Consequently, we also review the assumptions and data-screening issues involved in this method. Throughout the paper, we demonstrate these procedures using an historic data set of nine cognitive ability variables. PMID:22403561

The transiting dust clumps in the evolved disc of the Sun-like UXor RZ Psc

PubMed Central

Kenworthy, Matthew A.; Pepper, Joshua; Rodriguez, Joseph E.; Siverd, Robert J.; Stassun, Keivan G.; Wyatt, Mark C.

2017-01-01

RZ Psc is a young Sun-like star, long associated with the UXor class of variable stars, which is partially or wholly dimmed by dust clumps several times each year. The system has a bright and variable infrared excess, which has been interpreted as evidence that the dimming events are the passage of asteroidal fragments in front of the host star. Here, we present a decade of optical photometry of RZ Psc and take a critical look at the asteroid belt interpretation. We show that the distribution of light curve gradients is non-uniform for deep events, which we interpret as possible evidence for an asteroidal fragment-like clump structure. However, the clumps are very likely seen above a high optical depth midplane, so the disc’s bulk clumpiness is not revealed. While circumstantial evidence suggests an asteroid belt is more plausible than a gas-rich transition disc, the evolutionary status remains uncertain. We suggest that the rarity of Sun-like stars showing disc-related variability may arise because (i) any accretion streams are transparent and/or (ii) turbulence above the inner rim is normally shadowed by a flared outer disc. PMID:28280566

The transiting dust clumps in the evolved disc of the Sun-like UXor RZ Psc.

PubMed

Kennedy, Grant M; Kenworthy, Matthew A; Pepper, Joshua; Rodriguez, Joseph E; Siverd, Robert J; Stassun, Keivan G; Wyatt, Mark C

2017-01-01

RZ Psc is a young Sun-like star, long associated with the UXor class of variable stars, which is partially or wholly dimmed by dust clumps several times each year. The system has a bright and variable infrared excess, which has been interpreted as evidence that the dimming events are the passage of asteroidal fragments in front of the host star. Here, we present a decade of optical photometry of RZ Psc and take a critical look at the asteroid belt interpretation. We show that the distribution of light curve gradients is non-uniform for deep events, which we interpret as possible evidence for an asteroidal fragment-like clump structure. However, the clumps are very likely seen above a high optical depth midplane, so the disc's bulk clumpiness is not revealed. While circumstantial evidence suggests an asteroid belt is more plausible than a gas-rich transition disc, the evolutionary status remains uncertain. We suggest that the rarity of Sun-like stars showing disc-related variability may arise because (i) any accretion streams are transparent and/or (ii) turbulence above the inner rim is normally shadowed by a flared outer disc.

The transiting dust clumps in the evolved disc of the Sun-like UXor RZ Psc

NASA Astrophysics Data System (ADS)

Kennedy, Grant M.; Kenworthy, Matthew A.; Pepper, Joshua; Rodriguez, Joseph E.; Siverd, Robert J.; Stassun, Keivan G.; Wyatt, Mark C.

2017-01-01

RZ Psc is a young Sun-like star, long associated with the UXor class of variable stars, which is partially or wholly dimmed by dust clumps several times each year. The system has a bright and variable infrared excess, which has been interpreted as evidence that the dimming events are the passage of asteroidal fragments in front of the host star. Here, we present a decade of optical photometry of RZ Psc and take a critical look at the asteroid belt interpretation. We show that the distribution of light curve gradients is non-uniform for deep events, which we interpret as possible evidence for an asteroidal fragment-like clump structure. However, the clumps are very likely seen above a high optical depth midplane, so the disc's bulk clumpiness is not revealed. While circumstantial evidence suggests an asteroid belt is more plausible than a gas-rich transition disc, the evolutionary status remains uncertain. We suggest that the rarity of Sun-like stars showing disc-related variability may arise because (i) any accretion streams are transparent and/or (ii) turbulence above the inner rim is normally shadowed by a flared outer disc.

Assessment of statistical uncertainty in the quantitative analysis of solid samples in motion using laser-induced breakdown spectroscopy

NASA Astrophysics Data System (ADS)

Cabalín, L. M.; González, A.; Ruiz, J.; Laserna, J. J.

2010-08-01

Statistical uncertainty in the quantitative analysis of solid samples in motion by laser-induced breakdown spectroscopy (LIBS) has been assessed. For this purpose, a LIBS demonstrator was designed and constructed in our laboratory. The LIBS system consisted of a laboratory-scale conveyor belt, a compact optical module and a Nd:YAG laser operating at 532 nm. The speed of the conveyor belt was variable and could be adjusted up to a maximum speed of 2 m s - 1 . Statistical uncertainty in the analytical measurements was estimated in terms of precision (reproducibility and repeatability) and accuracy. The results obtained by LIBS on shredded scrap samples under real conditions have demonstrated that the analytical precision and accuracy of LIBS is dependent on the sample geometry, position on the conveyor belt and surface cleanliness. Flat, relatively clean scrap samples exhibited acceptable reproducibility and repeatability; by contrast, samples with an irregular shape or a dirty surface exhibited a poor relative standard deviation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasuga, Toshihiro; Shirahata, Mai; Usui, Fumihiko

Most outer main-belt asteroids have low albedos because of their carbonaceouslike bodies. However, infrared satellite surveys have revealed that some asteroids have high albedos, which may suggest the presence of unusual surface minerals for those primitive objects. We present new near-infrared (1.1–2.5 μm) spectra of four outer main-belt asteroids with albedos ≥ 0.1. The C-complex asteroids (555) Norma and (2542) Calpurnia are featureless and have (50%–60%) amorphous Mg pyroxenes that might explain the high albedos. Asteroids (701) Oriola (which is a C-complex asteroid) and (2670) Chuvashia (a D/T-type or M-type asteroid) show possible broad absorption bands (1.5–2.1 μm). The featuremore » can be reproduced by either Mg-rich amorphous pyroxene (with 50%–60% and 80%–95% Mg, respectively) or orthopyroxene (crystalline silicate), which might be responsible for the high albedos. No absorption features of water ice (near 1.5 and 2.0 μm) are detected in the objects. We discuss the origin of high albedo components in the outer main-belt asteroids and their physical relations to comets.« less

Cold DUst around NEarby Stars (DUNES). First results. A resolved exo-Kuiper belt around the solar-like star ζ2 Ret

NASA Astrophysics Data System (ADS)

Eiroa, C.; Fedele, D.; Maldonado, J.; González-García, B. M.; Rodmann, J.; Heras, A. M.; Pilbratt, G. L.; Augereau, J.-Ch.; Mora, A.; Montesinos, B.; Ardila, D.; Bryden, G.; Liseau, R.; Stapelfeldt, K.; Launhardt, R.; Solano, E.; Bayo, A.; Absil, O.; Arévalo, M.; Barrado, D.; Beichmann, C.; Danchi, W.; Del Burgo, C.; Ertel, S.; Fridlund, M.; Fukagawa, M.; Gutiérrez, R.; Grün, E.; Kamp, I.; Krivov, A.; Lebreton, J.; Löhne, T.; Lorente, R.; Marshall, J.; Martínez-Arnáiz, R.; Meeus, G.; Montes, D.; Morbidelli, A.; Müller, S.; Mutschke, H.; Nakagawa, T.; Olofsson, G.; Ribas, I.; Roberge, A.; Sanz-Forcada, J.; Thébault, P.; Walker, H.; White, G. J.; Wolf, S.

2010-07-01

We present the first far-IR observations of the solar-type stars δ Pav, HR 8501, 51 Peg and ζ2 Ret, taken within the context of the DUNES Herschel open time key programme (OTKP). This project uses the PACS and SPIRE instruments with the objective of studying infrared excesses due to exo-Kuiper belts around nearby solar-type stars. The observed 100 μm fluxes from δ Pav, HR 8501, and 51 Peg agree with the predicted photospheric fluxes, excluding debris disks brighter than Ldust/Lstar 5 × 10-7 (1σ level) around those stars. A flattened, disk-like structure with a semi-major axis of 100 AU in size is detected around ζ2 Ret. The resolved structure suggests the presence of an eccentric dust ring, which we interpret as an exo-Kuiper belt with Ldust/Lstar ≈ 10-5. Herschel is an ESA space observatory with science instruments provided by European-led Principal Investigator consortia and with important participation from NASA.

The compositional diversity of non-Vesta basaltic asteroids

NASA Astrophysics Data System (ADS)

Leith, Thomas B.; Moskovitz, Nicholas A.; Mayne, Rhiannon G.; DeMeo, Francesca E.; Takir, Driss; Burt, Brian J.; Binzel, Richard P.; Pefkou, Dimitra

2017-10-01

We present near-infrared (0.78-2.45 μm) reflectance spectra for nine middle and outer main belt (a > 2.5 AU) basaltic asteroids. Three of these objects are spectrally distinct from all classifications in the Bus-DeMeo system and could represent spectral end members in the existing taxonomy or be representatives of a new spectral type. The remainder of the sample are classified as V- or R-type. All of these asteroids are dynamically detached from the Vesta collisional family, but are too small to be intact differentiated parent bodies, implying that they originated from differentiated planetesimals which have since been destroyed or ejected from the solar system. The 1- and 2-μm band centers of all objects, determined using the Modified Gaussian Model (MGM), were compared to those of 47 Vestoids and fifteen HED meteorites of known composition. The HEDs enabled us to determine formulas relating Band 1 and Band 2 centers to pyroxene ferrosilite (Fs) compositions. Using these formulas we present the most comprehensive compositional analysis to date of middle and outer belt basaltic asteroids. We also conduct a careful error analysis of the MGM-derived band centers for implementation in future analyses. The six outer belt V- and R-type asteroids show more dispersion in parameter space than the Vestoids, reflecting greater compositional diversity than Vesta and its associated bodies. The objects analyzed have Fs numbers which are, on average, between five and ten molar percent lower than those of the Vestoids; however, identification and compositional analysis of additional outer belt basaltic asteroids would help to confirm or refute this result. Given the gradient in oxidation state which existed within the solar nebula, these results tentatively suggest that these objects formed at either a different time or location than 4 Vesta.

A photoelectric lightcurve survey of small main belt asteroids

NASA Technical Reports Server (NTRS)

Binzel, R. P.; Mulholland, J. D.

1983-01-01

A survey to obtain photoelectric lightcurves of small main-belt asteroids was conducted from November 1981 to April 1982 using the 0.91- and 2.1-m telescopes at the University of Texas McDonald Observatory. A total of 18 main-belt asteroids having estimated dimaters under 30 km were observed with over half of these being smaller than 15 km. Rotational periods were determined or estimated from multiple nights of observation for nearly all of these yielding a sample of 17 small main-belt asteroids which is believed to be free of observational selection effects. All but two of these objects were investigated for very short periods in the range of 1 min to 2 hr using power spectrum analysis of a continuous set of integrations. No evidence for such short periods was seen in this sample. Rotationally averaged B(1,0) magnitudes were determined for most of the surveyed asteroids, allowing diameter estimates to be made. Imposing the suspected selection effects of photogaphic photometry on the results of this survey gives excellent agreement with the results from that technique. This shows that the inability of photographic photometry to obtain results for many asteroids is indeed due to the rotational parameter of those asteroids.

An improved strategy for regression of biophysical variables and Landsat ETM+ data.

Treesearch

Warren B. Cohen; Thomas K. Maiersperger; Stith T. Gower; David P. Turner

2003-01-01

Empirical models are important tools for relating field-measured biophysical variables to remote sensing data. Regression analysis has been a popular empirical method of linking these two types of data to provide continuous estimates for variables such as biomass, percent woody canopy cover, and leaf area index (LAI). Traditional methods of regression are not...

IRAC Monitoring of the Late Heavy Comet Bombardment in the eta Corvi System

NASA Astrophysics Data System (ADS)

Marengo, Massimo; Lisse, Carey; Stapelfeldt, Karl; Hulsebus, Alan

2014-12-01

The nearby sun-like star eta Corvi (F2V, d=18 pc, age =1.2 Gyr) has long been known to possess a bright, dusty Kuiper Belt that has now been resolved with Herschel PACS. A warm inner dust belt indicated by an IRAS 12 micron excess and has recently been resolved as a 3-AU scale structure by VLT observations. In 2012 Lisse et al. further characterized this warm dust using Spitzer IRS, identifying the signatures of ice, organics and silicate dust in this system's Terrestrial Habitability Zone (THZ). The system appears to be undergoing a Late Heavy Bombardment (LHB), delivering primitive, water- and organic-rich material from the Kuiper Belt to the THZ, at roughly the same relative age as the solar system's LHB. Our data also showed an upturn in the excess flux shortwards of 6 micron ? evidence for a surprisingly large amount of icy dust scattering in the inner system (fscat/fstar ~ 1.0%). This results is corroborated by our recent 2-5 micron NASA/IRTF SpeX spectroscopy. In 2012 we have obtained Spitzer/IRAC photometric data for the system, detecting the disk at 3.6 and 4.5 micron in two separate epochs, followed by a third epoch in 2013. We now propose to continue our photometric monitoring with 15 additional visits to be scheduled within cycle 11, in order to extend our temporal coverage to 4 years on a variety of timescales ranging from days, to weeks, to months. The proposed campaign will allow us to test the two competing hypothesis for the origin of the warm disk: (1) single collison event leading to the breakup of a large Kuiper Belt object in the system or (2) continual raining of small comets scattered towards the inner system.

Building a Foundation of Continuous Improvement in a Rapidly Changing Environment: The Dartmouth-Hitchcock Value Institute Experience.

PubMed

McGrath, Susan P; Blike, George T

2015-10-01

A performance improvement competency development program, known as the Value Institute (VI), was established at Dartmouth-Hitchcock (D-H; Lebanon, New Hampshire) in 2011 to develop a performance improvement-focused workforce and systems capable of meeting the challenges of creating a sustainable health system. A tiered competency development program that provides patient safety, health care quality, and improvement science education, and an execution support infrastructure that enables access to performance improvement tools for all employees, comprise the core of the VI. At 20 months after the launch of the first VI classes, more than 10% of all employees were trained to the Yellow Belt level, and approximately 1.5% of all employees became advanced practitioners (Green Belts or Black Belts). Improvement projects have focused on both clinical and business process optimization, as well as regulatory and accreditation compliance and patient safety. Project savings during the two years of operation have exceeded the investment of resources to establish this long-term performance improvement capability by 2.5 times. The D-H VI model promotes multidisciplinary team-based learning, incremental skill development, and access to a common continuous improvement vocabulary and method for all employees-all key to building the teams and momentum needed for successful execution of improvement work and to maintain outcomes. Initial outcomes, represented by organizational spread, project execution status, participants' feedback scores, and return on investment estimates, suggest that robust team-based learning combined with coaching provides sufficient depth and breadth of learning and effective opportunities to gain practical experience in continuous improvement.

The systematic change of metamorphism along the Dabie-Sulu-Hongseong-Odesan collision belt between the North and South China blocks

NASA Astrophysics Data System (ADS)

Oh, C. W.

2013-12-01

As a last step of formation of the Pangea supercontinent, the North China block collided with the South China block during Permo-Triassic time forming the Oinling-Dabie-Sulu collision belt which was identified by the finding of ultrahigh- and high-P/T eclogites along the belt. After the Qiling-Dabie-Sulu collision belt was found, the continuation of the collision belt into Korean Peninsula became a hot issue. Although the Imjingang belt in Korean Peninsula was suggested as an extension of the belt, no evidence of collision belt such as eclogite and ophiolite, was found. Whereas recent studies on Korean Peninsula reveal that Triassic eclogite (ca. > 230 Ma) formed in the Hongseong area and Triassic post collision igneous rocks (with ca. 230 Ma intrusion ages) occurred throughout the Gyeonggi Massif locating to the north of the line connecting the Hongseong, Yangpyeong and Odesan areas. These new findings derive the tectonic model in which the Permo-Triassic Qinling-Dabie-Sulu collision belt between the North and South China blocks extends into the Hongseong-Yangpyeong-Odesan collision belt in Korean Peninsula. The belt may be further extended into the late Paleozoic subduction complex in the Yanji belt in North Korea through the Paleozoic subduction complex in the inner part of SW Japan. The collision had started from Korea at ca. 250 Ma and propagated towards China. The collision completed during late Triassic. The metamorphic conditions systematically change along the collision belt; ultrahigh-temperature metamorphism occurred in the Odesan area (at 245-230Ma; 9.0-10.6 kbar, 915-1160°C), high-P/T metamorphism in the Hongseong area (17.0-21.9 kbar, 835-860°C) and ultrahigh-pressure metamorphism in the Dabie and Sulu belts (30-40 kbar, 680-880°C). This systematic increasing peak pressure condition and decreasing peak temperature condition towards west, may be due to the increase in the depth of slab break-off towards west, which might be related to the increase of the amounts of subducted ocecnic slab towards west. The wide distribution of Permo-Triassic arc-related granitoids in the Yeongnam Massif, southern part of Korean Peninsula and in the southern part of the South China block, indicate the Permo-Triassic subduction along the southern boundary of the South China block which may be due to compression caused by the Permo-Triassic collision between the North and South China blocks. The collision belt divides the Gyeonggi Massif into two parts; the northern and southern parts can be correlated to the North and South China blocks, respectively. The Ogcheon metamorphic belt which locates between the Gyeonggi and Youngnam Massifs in Korean Peninsula, can be correlated to the Nanhua rift which formed at 760 Ma and separated the South China blocks into the Yantze and Cathaysia cratons. In that case, the southern Gyeonggi Massif and Yeongnam Massif can be correlated to the Yangtze and Cathaysia cratons in the South China block, respectively. Recently Neoproterozoic igneous complex which was metamorphosed by the late Silurian intermediate-P/T and early Devonian ultrahigh temperature metamorphism, are recognized in the Hongseong area. These metamorphisms indicate the possibility of Middle Paleozoic collision of Neoproterozoic microcontinent with the northern margin of the South China block.

Sr-Nd-Pb isotope systematics of the Permian volcanic rocks in the northern margin of the Alxa Block (the Shalazhashan Belt) and comparisons with the nearby regions: Implications for a Permian rift setting?

NASA Astrophysics Data System (ADS)

Shi, Guanzhong; Wang, Hua; Liu, Entao; Huang, Chuanyan; Zhao, Jianxin; Song, Guangzeng; Liang, Chao

2018-04-01

The petrogenesis of the Permian magmatic rocks in the Shalazhashan Belt is helpful for us to understand the tectonic evolution of the Central Asian Orogenic Belt (CAOB) in the northern margin of the Alxa Block. The Permian volcanic rocks in the Shalazhashan Belt include basalts, trachyandesites and trachydacites. Our study shows that two basalt samples have negative εNd(t) values (-5.4 to -1.5) and higher radiogenic Pb values, which are relevant to the ancient subcontinental lithospheric mantle. One basalt sample has positive εNd(t) value (+10) representing mafic juvenile crust and is derived from depleted asthenosphere. The trachyandesites are dated at 284 ± 3 Ma with εNd(t) = +2.7 to +8.0; ISr = 0.7052 to 0.7057, and they are generated by different degrees of mixing between mafic magmas and crustal melts. The trachydacites have high εNd(t) values and slightly higher ISr contents, suggesting the derivation from juvenile sources with crustal contamination. The isotopic comparisons of the Permian magmatic rocks of the Shalazhashan Belt, the Nuru-Langshan Belt (representing the northern margin of the Alxa Block), the Solonker Belt (Mandula area) and the northern margin of the North China Craton (Bayan Obo area) indicate that the radiogenic isotopic compositions have an increasingly evolved trend from the south (the northern margins of the Alxa Block and the North China Craton) to the north (the Shalazhashan Belt and the Solonker Belt). Three end-member components are involved to generate the Permian magmatic rocks: the ancient subcontinental lithospheric mantle, the mafic juvenile crust or newly underplated mafic rocks that were originated from depleted asthenosphere, and the ancient crust. The rocks correlative with the mafic juvenile crust or newly underplated mafic rocks are predominantly distributed along the Shalazhashan Belt and the Solonker Belt, and the rocks derived from ancient, enriched subcontinental lithospheric mantle are mainly distributed along the northern margins of the Alxa Block and the North China Craton. The magmatic rock types, isotopic features and their temporal, spatial distributions suggest an extensional regime probably related to rifting.

Accretion of the Archean Slave Province

NASA Technical Reports Server (NTRS)

Kusky, Timothy

1988-01-01

Detailed field studies of selected areas in the greenstone belts of the Slave Province of Canada were presented. This area was long cited as a type area by supporters of the (now generally abandoned) rift model of greenstone belts. It was shown that a plate tectonic interpretation accounted more successfully for the regional geology and identified four terranes that had experienced complex divergent and convergent histories between 2.7 and 3.4 Ga. A dismembered ophiolite was identified and a late episode of widespread granitic intrusion was recognized.

Seasonal and Non-Seasonal Variations of Jupiter's Atmosphere from Observations of Thermal Emission, 1994-2011

NASA Technical Reports Server (NTRS)

Orton, G.; Fletcher, L.; Yanamandra-Fisher, P.; Greathouse, T.; Fisher, B.; Greco, J.; Wakefield, L.; Snead, E.; Boydstun, K.; Simon-Miller, A.;

14 CFR 158.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Definitions. 158.3 Section 158.3 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS... airport to support aeronautical operations and related activities. Baggage tugs, belt loaders, cargo...

14 CFR 158.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Definitions. 158.3 Section 158.3 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS... airport to support aeronautical operations and related activities. Baggage tugs, belt loaders, cargo...

Small scale heterogeneity of Phanerozoic lower crust: evidence from isotopic and geochemical systematics of mid-Cretaceous granulite gneisses, San Gabriel Mountains, southern California

USGS Publications Warehouse

Barth, A.P.; Wooden, J.L.; May, D.J.

1992-01-01

An elongate belt of mid-Cretaceous, compositionally banded gneisses and granulites is exposed in Cucamonga terrane, in the southeastern foothills of the San Gabriel Mountains of southern California. Banded gneisses include mafic granulites of two geochemical types: type 1 rocks are similar to high Al arc basalts and andesites but have higher HFSE (high-field-strength-element) abundances and extremely variable LILE (largeion-lithophile-element) abundances, while type 2 rocks are relatively low in Al and similar to alkali rich MOR (midocean-ridge) or intraplate basalts. Intercalated with mafic granulites are paragneisses which include felsic granulites, aluminous gneisses, marble, and calc-silicate gneisses. Type 1 mafic granulites and calcic trondhjemitic pegmatites also oceur as cross-cutting, synmetamorphic dikes or small plutons. Small-scale heterogeneity of deep continental crust is indicated by the lithologic and isotopic diversity of intercalated ortho-and paragneisses exposed in Cucamonga terrane. Geochemical and isotopic data indicate that K, Rb, and U depletion and Sm/Nd fractionation were associated with biotite +/- muscovite dehydration reactions in type 1 mafic granulites and aluminous gneisses during high-grade metamorphism. Field relations and model initial isotopic ratios imply a wide range of protolith ages, ranging from Early Proterozoic to Phanerozoic. ?? 1992 Springer-Verlag.

Aulacogens and aulacogeosynclines: Regularities in setting and evolution

NASA Astrophysics Data System (ADS)

Milanovsky, E. E.

1992-12-01

Aulacogens and aulacogeosynclinal zones represent intra-continental palaeorifts and inverted palaeorifts. They were formed in the process of the break-up of continents during the Late Proterozoic. Inversion of such basins occurred variably during the Baikalian, Caledonian, Hercynian and Alpine orogenic cycles in response to the build-up of intraplate compressional stresses emanating from orogenic belts. Aulacogens were first recognized on the stable Russian Platform where they correspond to linear, graben type depressions filled with Proterozoic sediments, often buried beneath a thick cover of Palaeozoic and younger sediments. Some aulacogens have experienced a short period of reactivation during the Palaeozoic. Aulacogeosynclines differ from the genetically related aulacogens by their greater dimensions and the amount of lithospheric extension that can go to the extent of opening of small ocean basins; consequently they are characterized by a greater degree of destruction of the continental crust, the depth of subsidence and the complexity of their post-rift development which commonly terminates with their compressional deformation, giving rise to the development of intracontinental linear folded and thrusted structures, frequently associated with low-grade metamorphism and small intrusions. Many ancient platforms are characterized by aulacogens; metaplatforms are dissected by aulacogens and aulacogeosynclines, whereas geosynclinal troughs are the precursors of geosynclinal mobil belts. Aulacogens, aulacogeosynclines and geosynclinal troughs represent a group of negative, linear structures which are characterized by an increasing degree of crustal destruction during rifting processes and increasing mobility during lithospheric contraction.

Precise hypocenter distribution and earthquake generating and stress in and around the upper-plane seismic belt in the subducting Pacific slab beneath NE Japan

NASA Astrophysics Data System (ADS)

Kita, S.; Okada, T.; Nakajima, J.; Matsuzawa, T.; Uchida, N.; Hasegawa, A.

2007-12-01

1. Introduction We found an intraslab seismic belt (upper-plane seismic belt) in the upper plane of the double seismic zone within the Pacific slab, running interface at depths of 70-100km beneath the forearc area. The location of the deeper limits of this belt appears to correspond to one of the facies boundaries (from jadeite lawsonite blueschist to lawsonite amphibole eclogite) in the oceanic crust [Kita et al., 2006, GRL]. In this study, we precisely relocated intraslab earthquakes by using travel time differences calculated by the waveform cross-spectrum analysis to obtain more detailed distribution of the upper plane-seismic belt within the Pacific slab beneath NE Japan. We also discuss the stress field in the slab by examining focal mechanisms of the earthquakes. 2. Data and Method We relocated events at depths of 50-00 km for the period from March 2003 to November 2006 from the JMA earthquake catalog. We applied the double-difference hypocenter location method (DDLM) by Waldhauser and Ellsworth (2000) to the arrival time data of the events. We use relative earthquake arrival times determined both by the waveform cross-spectrum analysis and by the catalog-picking data. We also determine focal mechanisms using the P wave polarity. 3. Spatial distribution of relocated hypocenters In the upper portion of the slab crust, seismicity is very active and distributed relatively homogeneously at depths of about 70-100km parallel to the volcanic front, where the upper-plane seismic belt has been found. In the lower portion of slab crust and/or the uppermost portion of the slab mantle, seismicity is spatially very limited to some small areas (each size is about 20 x 20km) at depths around 65km. Two of them correspond to the aftershock area of the 2003 Miyagi (M7.1) intraslab earthquake and that of the 1987 Iwaizumi (M6.6) intraslab earthquake, respectively. Based on the dehydration embrittelment hypothesis, the difference of the spatial distribution of the seismicity in the slab should correspond to the difference of the spatial distribution of the hydrated minerals and their dehydration reactions. In the upper slab crust, the upper-plane seismic belt is found because the hydrated minerals could be distributed homogeneously and the dehydration reaction (from jadeite lawsonite blueschist to lawsonite amphibole eclogite [Hacker et al., 2003b]) occurs perhaps largely at depth of 70-100km. Our result also suggests that in the lower portion of the slab crust and/or the uppermost portion of the slab mantle, the hydrated minerals could be inhomogeneously distributed and the seismicity occurs at depths around 65km, where another dehydration reaction may exist. 4. Characteristics of the focal mechanisms We examined the stress distribution within the slab by using focal mechanisms of the upper plane, interplane and lower plane events. From the plate interface to about 20 km below it, downdip-compressional (DC) type events are dominant. Below 20km from the plate interface, downdip-tensional (DT) type events are dominant. Many of interplane events have DC type focal mechanisms because of their locations in the uppermost portions of the slab mantle. These results indicate that the stress neutral plane from the DC type to DT type could be located at depth of about 20km from the plate interface.

Demographics, Velocity Distributions, and Impact Type as Predictors of AIS 4+ Head Injuries in Motor Vehicle Crashes

PubMed Central

Yoganandan, Narayan; Fitzharris, Michael; Pintar, Frank A.; Stemper, Brian D.; Rinaldi, James; Maiman, Dennis J.; Fildes, Brian N.

2011-01-01

The objective of the study was to determine differences between the United States-based NASS and CIREN and Australia-based ANCIS databases in occupant-, crash-, and vehicle-related parameters for AIS 4+ head injuries in motor vehicle crashes. Logistic regression analysis was performed to examine roles of the change in velocity (DV), crash type (frontal, far-side, nearside, rear impact), seatbelt use, and occupant position, gender, age, stature, and body mass in cranial traumas. Belted and unbelted non-ejected occupant (age >16 years) data from 1997–2006 were used for the NASS and CIREN datasets, and 2000–2010 for ANCIS. Vehicle model year, and occupant position and demographics including body mass index (BMI) data were obtained. Injuries were coded using AIS 1990–1998 update. Similarities were apparent across all databases: mean demographics were close to the mid-size anthropometry, mean BMI was in the normal to overweight range, and representations of extreme variations were uncommon. Side impacts contributed to over one-half of the ensemble, implying susceptibility to head trauma in this mode. Odds of sustaining head injury increased by 4% per unit increase in DV (OR: 1.04, 95% CI: 1.03–1.04, p<0.001; adjusted for other variables); one-half for belted compared to unbelted occupants (OR: 0.48, 95% CI: 0.37–0.61, p<0.001); nearside, then far-side had significantly higher odds than frontal, and no difference by gender or position (front-left, front-right). Similar crash- and occupant-related outcomes from the two continents indicate a worldwide need to revise the translation acceleration-based head injury criterion to include the angular component in an appropriate format for improved injury assessment and mitigation. PMID:22105402

Forecasting Juno Microwave Radiometer Observations of Jupiter's Synchrotron Emission from Data Reconstruction Methods and Theoretical Model

NASA Astrophysics Data System (ADS)

Santos-Costa, D.; Bolton, S. J.; Adumitroaie, V.; Janssen, M.; Levin, S.; Sault, R. J.; De Pater, I.; Tao, C.

2015-12-01

The Juno spacecraft will go into polar orbit after it arrives at Jupiter in mid-2016. Between November 2016 and March 2017, six MicroWave Radiometers will collect information on Jupiter's atmosphere and electron belt. Here we present simulations of MWR observations of the electron belt synchrotron emission, and discuss the features and dynamical behavior of this emission when observations are carried out from inside the radiation zone. We first present our computation method. We combine a three-dimensional tomographic reconstruction method of Earth-based observations and a theoretical model of Jupiter's electron belt to constrain the calculations of the volume emissivity of the synchrotron radiation for any frequency, location in the Jovian inner magnetosphere (radial distance < 4 Rj), and observational direction. Values of the computed emissivity are incorporated into a synchrotron simulator to predict Juno MWR measurements (full sky maps and temperatures) at any time of the mission. Samples of simulated MWR observations are presented and examined for different segments of Juno trajectory. We also present results of our ongoing investigation of the radiation zone distribution around the planet and the sources of variation on different time-scales. We show that a better understanding of the spatial distribution and variability of the electron belt is key to realistically forecast Juno MWR measurements.

Variation of Radiation Belt Content Indices and total electron energy During Magnetic Storms Based On Van Allen Probe Observations

NASA Astrophysics Data System (ADS)

Xiong, Y.; Xie, L.; Chen, L.; Pu, Z.

2017-12-01

We investigate the variability of the RBC indices and total electron energy for varying energies within outer belt during 42 isolate magnetic storms based on the electron flux data from MagEIS and REPT onboard Van Allen Probe-A spacecraft. Van Allan Probes travel throughout the entire radiation belt twice during each orbit, providing an excellent opportunity to measure the electron's pitch angle distributions near the magnetic equatorial plane which is essential to calculate the RBC index accurately. Instead of assuming an isotropic electron pitch angle distribution which is widely used in previous studies, we develop a new and reliable technique to infer the equatorial pitch angle distributions based on the off-equator measurements. The statistic results show that the total electron energy in outer belt increase in 80% storms and has a positive correlation with median value of AE during recovery phase and minimum -Dst. The possibility of observing RBC depletion increase at high energies. The upper limit energy of RBC enhancement has a positive correlation with median value of AE and Vsw during recovery phase and a negative correlation with median value of Nsw during storm, which is consist of the balance of acceleration by chorus waves and loss by EMIC waves.

The differentiation process of the I-type granitoids in southwest Japan and New South Wares in Australia

NASA Astrophysics Data System (ADS)

Kawakatsu, K.; Iwamoto, Y.; Ebisu, S.; Hasegawa, M.; Hiraiwa, N.; Kawakatsu, T.; Kitano, A.; Masuta, T.; Ootsubo, H.; Wakazono, R.

2013-12-01

Cretaceous-Paleogene Granitoids in the inner zone of southwest Japan have been divided into two series: the magnetite series that is distributed mainly in the San-in belt and the ilmenite series that is distributed mainly in San-yo belt. For 8 years, we have been investigating the two series to clear their processes of magmatic differentiation. Recently, we discovered oscillatory zoned structure, exsolution lamellae of amphibole, and relics of pyroxene left in the core of amphibole from Harima granodiorite, Nunobiki granodiorite (San-yo belt) and Daito-Yokota quartz diorite (San-in belt). The amphibole that has microstructure coexists with magnetite, ilmenite and pyrrhotite. We compared the two series for crystallization and re-equilibrium by ion substitution using the microstructure of the amphibole as 'time measure' during the differentitation process of acidic magma. While magnetites and ilmenites coexist with the core of the amphiboles, the oxygen fugacity of the San-yo belt magma was low until the later stage of magmatic differentiation where H2S from the Earth's crust mixed with it. In the subsolidus process, hydrothermal solutions circulated. On the other hand, the oxygen fugacity of the San-in belt magma began to rise in the early stage of magmatic differentiation. In the later stage, mafic magma was contaminated with SO2. The rims of amphiboles coexist with pyrrhotites in both of belts. Furthermore, the re-equilibrium of minerals underwent progressive oxidation and hydrothermal fluid circulated actively in the subsolidus process. Bingie Bingie Point at New South Wares (Eurobodalla National Park) is a peninsula about a meter around. The plutonic rocks were formed in the Devonian period and belong to the magnetite series. They are classified I-type granitoids such as those found in the inner zone of southwest Japan. They have only trace amounts of oxide minerals and pyrrhotite. The amphiboles of the granitoids have oscillatory zoned structures at pale green rims. The structures are formed by the fluid circulations of intruded granodiorite magma. The relic pyroxene is left in the core of amphibole. These minerals were crystallized under stable conditions and the microstructures were developed in the amphiboles under the subsolidus conditions. These researches contribute to clarifying magmatic differentiation and are the foundation of understanding the exchange of substances in magmatic activity.

Statistical modeling of yield and variance instability in conventional and organic cropping systems

USDA-ARS?s Scientific Manuscript database

Cropping systems research was undertaken to address declining crop diversity and verify competitiveness of alternatives to the predominant conventional cropping system in the northern Corn Belt. To understand and capitalize on temporal yield variability within corn and soybean fields, we quantified ...

Solar System Science with LSST

NASA Astrophysics Data System (ADS)

Jones, R. L.; Chesley, S. R.; Connolly, A. J.; Harris, A. W.; Ivezic, Z.; Knezevic, Z.; Kubica, J.; Milani, A.; Trilling, D. E.

2008-09-01

The Large Synoptic Survey Telescope (LSST) will provide a unique tool to study moving objects throughout the solar system, creating massive catalogs of Near Earth Objects (NEOs), asteroids, Trojans, TransNeptunian Objects (TNOs), comets and planetary satellites with well-measured orbits and high quality, multi-color photometry accurate to 0.005 magnitudes for the brightest objects. In the baseline LSST observing plan, back-to-back 15-second images will reach a limiting magnitude as faint as r=24.7 in each 9.6 square degree image, twice per night; a total of approximately 15,000 square degrees of the sky will be imaged in multiple filters every 3 nights. This time sampling will continue throughout each lunation, creating a huge database of observations. Fig. 1 Sky coverage of LSST over 10 years; separate panels for each of the 6 LSST filters. Color bars indicate number of observations in filter. The catalogs will include more than 80% of the potentially hazardous asteroids larger than 140m in diameter within the first 10 years of LSST operation, millions of main-belt asteroids and perhaps 20,000 Trans-Neptunian Objects. Objects with diameters as small as 100m in the Main Belt and <100km in the Kuiper Belt can be detected in individual images. Specialized `deep drilling' observing sequences will detect KBOs down to 10s of kilometers in diameter. Long period comets will be detected at larger distances than previously possible, constrainting models of the Oort cloud. With the large number of objects expected in the catalogs, it may be possible to observe a pristine comet start outgassing on its first journey into the inner solar system. By observing fields over a wide range of ecliptic longitudes and latitudes, including large separations from the ecliptic plane, not only will these catalogs greatly increase the numbers of known objects, the characterization of the inclination distributions of these populations will be much improved. Derivation of proper elements for main belt and Trojan asteroids will allow ever more resolution of asteroid families and their size-frequency distribution, as well as the study of the long-term dynamics of the individual asteroids and the asteroid belt as a whole. Fig. 2 Orbital parameters of Main Belt Asteroids, color-coded according to ugriz colors measured by SDSS. The figure to the left shows osculating elements, the figure to the right shows proper elements - note the asteroid families visible as clumps in parameter space [1]. By obtaining multi-color ugrizy data for a substantial fraction of objects, relationships between color and dynamical history can be established. This will also enable taxonomic classification of asteroids, provide further links between diverse populations such as irregular satellites and TNOs or planetary Trojans, and enable estimates of asteroid diameter with rms uncertainty of 30%. With the addition of light-curve information, rotation periods and phase curves can be measured for large fractions of each population, leading to new insight on physical characteristics. Photometric variability information, together with sparse lightcurve inversion, will allow spin state and shape estimation for up to two orders of magnitude more objects than presently known. This will leverage physical studies of asteroids by constraining the size-strength relationship, which has important implications for the internal structure (solid, fractured, rubble pile) and in turn the collisional evolution of the asteroid belt. Similar information can be gained for other solar system bodies. [1] Parker, A., Ivezic

Origin of Outer Solar System

NASA Technical Reports Server (NTRS)

Holman, Matthew J.; Lindstrom, David (Technical Monitor)

2005-01-01

Our ongoing research program combines extensive deep and wide-field observations using a variety of observational platforms with numerical studies of the dynamics of small bodies in the outer solar system in order to advance the main scientific goals of the community studying the Kuiper belt and the outer solar system. These include: (1) determining the relative populations of the known classes of KBOs as well as other possible classes; ( 2 ) determining the size distributions or luminosity function of the individual populations or the Kuiper belt as a whole; (3) determining the inclinations distributions of these populations; (4) establishing the radial extent of the Kuiper belt; ( 5 ) measuring and relating the physical properties of different types of KBOs to those of other solar system bodies; and, (6) completing our systematic inventory of the satellites of the outer planets.

Tectonic evolution of the Satpura Mountain Belt: A critical evaluation and implication on supercontinent assembly

NASA Astrophysics Data System (ADS)

Mohanty, S.

2010-11-01

The Satpura Mountain Belt (also referred as Central Indian Tectonic Zone in recent literature) forms an important morphotectonic unit in the central part of India. Some of the recent workers have reported an orogenic event at ˜1000-900 Ma (termed "Sausar orogeny") which led to amalgamation of the North Indian Block and the South Indian Block and formation of the Satpura Mountain Belt. In this model the stratigraphic relations of two important lithostratigraphic units on either side of the Satpura Mountain Belt (the Sausar Group in the south and the Vindhyan Supergroup on the north) are suggested to be revised from previously held ideas. Critical analyses of available published work in the region to assess the status of the Sausar Group vis a vis the Vindhyan Supergroup was carried out. It is found that the ideas proposed by the recent workers stem from an earlier interpretation that the Sausar Group has monocyclic evolution and the earliest fabric in the Sausar Group is marked by a schistosity with EW strike. Re-mapping of the gneissic rocks and adjacent matasedimentary rocks of Khawasa, Deolapar, and Kandri-Mansar areas revealed presence of gneissic rocks and granulites of two generations, and of four phases of superposed deformations in the metasediments and gneisses. The older gneisses and granulites constitute the basement over which the rocks of the Sausar Group were deposited; and the younger gneisses developed by metamorphism and migmatisation of the rocks of the Sausar Group. The latter types are found in the Khawasa-Ramakona areas. Contrary to the belief of the recent workers that no volcanic activity is present in the Sausar Group, volcanic rocks marked by amygdular basic flows and tuffs have been mapped from different parts of the Sausar Group. Migmatisation and metamorphism of these volcanic rocks (of the Sausar Group) have given rise to amphibolites and granulites in Khawasa and Ramakona areas. Therefore, the use of fabric patterns in these areas to suggest that the granulite facies metamorphism in the Ramakona-Katangi granulite domain was pre-Sausar in age is debatable. Available geochronological data of the Satpura Mountain Belt and its eastward continuation into the Chhotanagpur Gneiss terrain indicate that the basement and cover rocks of these areas were subjected to multiple deformation and metamorphic episodes of similar style and nature. The earliest deformation and metamorphism of the rocks of the Sausar Group and its equivalent rocks to the east took place at ˜2100-1900 Ma. The regional EW trend of the belt developed during the second deformation at ˜1800-1700 Ma and again at ˜1600-1500 Ma. This deformation was accompanied by migmatisation and granulite facies metamorphism in the northern domain of the Sausar Belt and in the Chhotanagpur Gneiss region. Late phase low intensity deformations in the region were associated with thermal events at ˜1100-1000 Ma and ˜900-800 Ma. The ˜EW trending fabric, referred as "Satpura orogenic trend" in Indian literature marks a major compressional tectonic event, developed during the second deformation of the Sausar Group. This has its counter part in Western Australia as the Capricorn orogeny (˜1780-1830 Ma). The development of the Satpura Mountain Belt during the Grenvillian orogeny is ruled out from the synthesis of event stratigraphic data of the region and from its comparison with the Western Australian Craton.