Addition of dexmedetomidine to bupivacaine in supraclavicular brachial plexus block.

PubMed

Aksu, Recep; Bicer, Cihangir

2017-06-26

Research is ongoing to determine the lowest dose of local anesthetics in brachial plexus block that provides adequate anesthesia and postoperative analgesia and reduces complications related to local anesthetics. Patients 18-65 years of age who underwent upper limb surgery and who received ultrasound-guided supraclavicular brachial plexus block at the Erciyes University Faculty of Medicine Hospital between February 2014 and January 2015 were included in the study (n=50). Supraclavicular brachial plexus blocks were performed on Group B cases by adding 30 ml 0.33% bupivacaine and on Group BD cases by adding 15 ml 0.33% bupivacaine and 1 µg / kg dexmedetomidine. Block success was evaluated by the onset and block duration of motor and sensory block and the duration of analgesia. The block success of Group B and Group BD was 92.6% and 89.3%, respectively (P = 1.000). Onset time of sensory block, degree of sensory block, duration of sensory block, onset time of motor block, degree of motor block and duration of motor block were similar in both groups in the intergroup comparison (P > 0.05). Duration of analgesia and the operative conditions of groups were similar (P > 0.05). In the implementation of ultrasound-guided supraclavicular brachial plexus block, block success, sensory and motor block and analgesia duration were similar for patients anaesthetized with 30 ml of bupivacaine in comparison with dexmedetomidine+bupivacaine (when the bupivacaine dose was reduced by 50% by the addition of the adjuvant).

Sintering behavior and mechanical properties of zirconia compacts fabricated by uniaxial press forming.

PubMed

Oh, Gye-Jeong; Yun, Kwi-Dug; Lee, Kwang-Min; Lim, Hyun-Pil; Park, Sang-Won

2010-09-01

The purpose of this study was to compare the linear sintering behavior of presintered zirconia blocks of various densities. The mechanical properties of the resulting sintered zirconia blocks were then analyzed. Three experimental groups of dental zirconia blocks, with a different presintering density each, were designed in the present study. Kavo Everest® ZS blanks (Kavo, Biberach, Germany) were used as a control group. The experimental group blocks were fabricated from commercial yttria-stabilized tetragonal zirconia powder (KZ-3YF (SD) Type A, KCM. Corporation, Nagoya, Japan). The biaxial flexural strengths, microhardnesses, and microstructures of the sintered blocks were then investigated. The linear sintering shrinkages of blocks were calculated and compared. Despite their different presintered densities, the sintered blocks of the control and experimental groups showed similar mechanical properties. However, the sintered block had different linear sintering shrinkage rate depending on the density of the presintered block. As the density of the presintered block increased, the linear sintering shrinkage decreased. In the experimental blocks, the three sectioned pieces of each block showed the different linear shrinkage depending on the area. The tops of the experimental blocks showed the lowest linear sintering shrinkage, whereas the bottoms of the experimental blocks showed the highest linear sintering shrinkage. Within the limitations of this study, the density difference of the presintered zirconia block did not affect the mechanical properties of the sintered zirconia block, but affected the linear sintering shrinkage of the zirconia block.

Sintering behavior and mechanical properties of zirconia compacts fabricated by uniaxial press forming

PubMed Central

Oh, Gye-Jeong; Yun, Kwi-Dug; Lee, Kwang-Min; Lim, Hyun-Pil

2010-01-01

PURPOSE The purpose of this study was to compare the linear sintering behavior of presintered zirconia blocks of various densities. The mechanical properties of the resulting sintered zirconia blocks were then analyzed. MATERIALS AND METHODS Three experimental groups of dental zirconia blocks, with a different presintering density each, were designed in the present study. Kavo Everest® ZS blanks (Kavo, Biberach, Germany) were used as a control group. The experimental group blocks were fabricated from commercial yttria-stabilized tetragonal zirconia powder (KZ-3YF (SD) Type A, KCM. Corporation, Nagoya, Japan). The biaxial flexural strengths, microhardnesses, and microstructures of the sintered blocks were then investigated. The linear sintering shrinkages of blocks were calculated and compared. RESULTS Despite their different presintered densities, the sintered blocks of the control and experimental groups showed similar mechanical properties. However, the sintered block had different linear sintering shrinkage rate depending on the density of the presintered block. As the density of the presintered block increased, the linear sintering shrinkage decreased. In the experimental blocks, the three sectioned pieces of each block showed the different linear shrinkage depending on the area. The tops of the experimental blocks showed the lowest linear sintering shrinkage, whereas the bottoms of the experimental blocks showed the highest linear sintering shrinkage. CONCLUSION Within the limitations of this study, the density difference of the presintered zirconia block did not affect the mechanical properties of the sintered zirconia block, but affected the linear sintering shrinkage of the zirconia block. PMID:21165274

Design and Synthesis of Novel Block Copolymers for Efficient Opto-Electronic Applications

NASA Technical Reports Server (NTRS)

Sun, Sam-Shajing; Fan, Zhen; Wang, Yiqing; Taft, Charles; Haliburton, James; Maaref, Shahin

2002-01-01

It has been predicted that nano-phase separated block copolymer systems containing electron rich donor blocks and electron deficient acceptor blocks may facilitate the charge carrier separation and migration in organic photovoltaic devices due to improved morphology in comparison to polymer blend system. This paper presents preliminary data describing the design and synthesis of a novel Donor-Bridge-Acceptor (D-B-A) block copolymer system for potential high efficient organic optoelectronic applications. Specifically, the donor block contains an electron donating alkyloxy derivatized polyphenylenevinylene (PPV), the acceptor block contains an electron withdrawing alkyl-sulfone derivatized polyphenylenevinylene (PPV), and the bridge block contains an electronically neutral non-conjugated aliphatic hydrocarbon chain. The key synthetic strategy includes the synthesis of each individual block first, then couple the blocks together. While the donor block stabilizes and facilitates the transport of the holes, the acceptor block stabilizes and facilitates the transport of the electrons, the bridge block is designed to hinder the probability of electron-hole recombination. Thus, improved charge separation and stability are expected with this system. In addition, charge migration toward electrodes may also be facilitated due to the potential nano-phase separated and highly ordered block copolymer ultra-structure.

49 CFR 236.824 - System, automatic block signal.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false System, automatic block signal. 236.824 Section... § 236.824 System, automatic block signal. A block signal system wherein the use of each block is governed by an automatic block signal, cab signal, or both. ...

Electrocardiographic characteristics of atrioventricular block induced by tilt testing.

PubMed

Zyśko, Dorota; Gajek, Jacek; Koźluk, Edward; Mazurek, Walentyna

2009-02-01

The electrocardiographic (ECG) characteristics of atrioventricular (AV) block during reflex syncope may be unique due to the presence of hypervagotonia. The aim of the present study was to define the ECG characteristics of the AV block induced by neurocardiogenic reflex provoked by tilt testing (TT). A series of 31 patients with presumed vasovagal syncope and AV block provoked by TT was studied. The duration of PP and PR interval, AV block grade and type, concomitant arrhythmias, and timing of the AV block occurrence were assessed. The AV block occurred at TT termination in 26 patients, in the recovery in 4 patients, and in both periods in 1 patient. Atrioventricular block was preceded by sinus slowing, and sinus rhythm during AV block was slow and instable. Mobitz I, 2:1 second-degree AV block, and advanced second-degree AV block were recognized in 35.5, 48.4, and 67.8% of patients, respectively. Third-degree AV block was diagnosed in 41.9% of patients. Twenty-one patients had at least two AV block forms. The most prevalent concomitant arrhythmia was junctional escape rhythm (61.3%). (i) The occurrence of the AV block during neurocardiogenic reaction induced by TT is always preceded by sinus rhythm slowing and usually by PR interval prolongation. (ii) The AV block provoked by TT usually occurs at TT termination, but may occur even in the recovery period in a supine position. Sometimes the AV block may be present both at TT termination and during the recovery period.

31 CFR 598.301 - Blocked account; blocked property.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... 598.301 Section 598.301 Money and Finance: Treasury Regulations Relating to Money and Finance... REGULATIONS General Definitions § 598.301 Blocked account; blocked property. The terms blocked account and blocked property mean any account or property subject to § 598.202 held in the name of a specially...

Main-chain supramolecular block copolymers.

PubMed

Yang, Si Kyung; Ambade, Ashootosh V; Weck, Marcus

2011-01-01

Block copolymers are key building blocks for a variety of applications ranging from electronic devices to drug delivery. The material properties of block copolymers can be tuned and potentially improved by introducing noncovalent interactions in place of covalent linkages between polymeric blocks resulting in the formation of supramolecular block copolymers. Such materials combine the microphase separation behavior inherent to block copolymers with the responsiveness of supramolecular materials thereby affording dynamic and reversible materials. This tutorial review covers recent advances in main-chain supramolecular block copolymers and describes the design principles, synthetic approaches, advantages, and potential applications.

Ganglion blocks as a treatment of pain: current perspectives

PubMed Central

Gunduz, Osman Hakan; Kenis-Coskun, Ozge

2017-01-01

The inputs from sympathetic ganglia have been known to be involved in the pathophysiology of various painful conditions such as complex regional pain syndrome, cancer pain of different origin, and coccygodynia. Sympathetic ganglia blocks are used to relieve patients who suffer from these conditions for over a century. Many numbers of local anesthetics such as bupivacaine or neurolytic agents such as alcohol can be chosen for a successful block. The agent is selected according to its duration of effect and the purpose of the injection. Most commonly used sympathetic blocks are stellate ganglion block, lumbar sympathetic block, celiac plexus block, superior hypogastric block, and ganglion Impar block. In this review, indications, methods, effectiveness, and complications of these blocks are discussed based on the data from the current literature. PMID:29276402

Periodic nanostructures from self assembled wedge-type block-copolymers

DOEpatents

Xia, Yan; Sveinbjornsson, Benjamin R.; Grubbs, Robert H.; Weitekamp, Raymond; Miyake, Garret M.; Piunova, Victoria; Daeffler, Christopher Scot

2015-06-02

The invention provides a class of wedge-type block copolymers having a plurality of chemically different blocks, at least a portion of which incorporates a wedge group-containing block providing useful properties. For example, use of one or more wedge group-containing blocks in some block copolymers of the invention significantly inhibits chain entanglement and, thus, the present block copolymers materials provide a class of polymer materials capable of efficient molecular self-assembly to generate a range of structures, such as periodic nanostructures and microstructures. Materials of the present invention include copolymers having one or more wedge group-containing blocks, and optionally for some applications copolymers also incorporating one or more polymer side group-containing blocks. The present invention also provides useful methods of making and using wedge-type block copolymers.

Cutaneous Sensory Block Area, Muscle-Relaxing Effect, and Block Duration of the Transversus Abdominis Plane Block: A Randomized, Blinded, and Placebo-Controlled Study in Healthy Volunteers.

PubMed

Støving, Kion; Rothe, Christian; Rosenstock, Charlotte V; Aasvang, Eske K; Lundstrøm, Lars H; Lange, Kai H W

2015-01-01

The transversus abdominis plane (TAP) block is a widely used nerve block. However, basic block characteristics are poorly described. The purpose of this study was to assess the cutaneous sensory block area, muscle-relaxing effect, and block duration. Sixteen healthy volunteers were randomized to receive an ultrasound-guided unilateral TAP block with 20 mL 7.5 mg/mL ropivacaine and placebo on the contralateral side. Measurements were performed at baseline and 90 minutes after performing the block. Cutaneous sensory block area was mapped and separated into a medial and lateral part by a vertical line through the anterior superior iliac spine. We measured muscle thickness of the 3 lateral abdominal muscle layers with ultrasound in the relaxed state and during maximal voluntary muscle contraction. The volunteers reported the duration of the sensory block and the abdominal muscle-relaxing effect. The lateral part of the cutaneous sensory block area was a median of 266 cm2 (interquartile range, 191-310 cm2) and the medial part 76 cm 2(interquartile range, 54-127 cm2). In all the volunteers, lateral wall muscle thickness decreased significantly by 9.2 mm (6.9-15.7 mm) during a maximal contraction. Sensory block and muscle-relaxing effect duration were 570 minutes (512-716 minutes) and 609 minutes (490-724 minutes), respectively. Cutaneous sensory block area of the TAP block is predominantly located lateral to a vertical line through the anterior superior iliac spine. The distribution is nondermatomal and does not cross the midline. The muscle-relaxing effect is significant and consistent. The block duration is approximately 10 hours with large variation.

Microphase separation in random multiblock copolymers

NASA Astrophysics Data System (ADS)

Govorun, E. N.; Chertovich, A. V.

2017-01-01

Microphase separation in random multiblock copolymers is studied with the mean-field theory assuming that long blocks of a copolymer are strongly segregated, whereas short blocks are able to penetrate into "alien" domains and exchange between the domains and interfacial layer. A bidisperse copolymer with blocks of only two sizes (long and short) is considered as a model of multiblock copolymers with high polydispersity in the block size. Short blocks of the copolymer play an important role in the microphase separation. First, their penetration into the "alien" domains leads to the formation of joint long blocks in their own domains. Second, short blocks localized at the interface considerably change the interfacial tension. The possibility of penetration of short blocks into the "alien" domains is controlled by the product χ Nsh (χ is the Flory-Huggins interaction parameter and Nsh is the short block length). At not very large χ Nsh , the domain size is larger than that for a regular copolymer consisting of the same long blocks as in the considered random copolymer. At a fixed mean block size, the domain size grows with an increase in the block size dispersity, the rate of the growth being dependent of the more detailed parameters of the block size distribution.

Assemblies and methods for mitigating effects of reactor pressure vessel expansion

DOEpatents

Challberg, Roy C.; Gou, Perng-Fei; Chu, Cherk Lam; Oliver, Robert P.

1999-01-01

Support assemblies for allowing RPV radial expansion while simultaneously limiting horizontal, vertical, and azimuthal movement of the RPV within a nuclear reactor are described. In one embodiment, the support assembly includes a support block and a guide block. The support block includes a first portion and a second portion, and the first portion is rigidly coupled to the RPV adjacent the first portion. The guide block is rigidly coupled to a reactor pressure vessel support structure and includes a channel sized to receive the second portion of the support block. The second portion of the support block is positioned in the guide block channel to movably couple the guide block to the support block.

Assemblies and methods for mitigating effects of reactor pressure vessel expansion

DOEpatents

Challberg, R.C.; Gou, P.F.; Chu, C.L.; Oliver, R.P.

1999-07-27

Support assemblies for allowing RPV radial expansion while simultaneously limiting horizontal, vertical, and azimuthal movement of the RPV within a nuclear reactor are described. In one embodiment, the support assembly includes a support block and a guide block. The support block includes a first portion and a second portion, and the first portion is rigidly coupled to the RPV adjacent the first portion. The guide block is rigidly coupled to a reactor pressure vessel support structure and includes a channel sized to receive the second portion of the support block. The second portion of the support block is positioned in the guide block channel to movably couple the guide block to the support block. 6 figs.

Criminal Justice Systems. Block I: Law Enforcement. Block II: The Courts. Block III: Corrections. Block IV: Community Relations. Block V: Proficiency Skills. Block VI: Criminalistics. Instructor Guide.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This instructor guide together with a student guide comprise a set of curriculum materials on the criminal justice system. The instructor guide is a resource for planning and managing individualized, competency-based instruction in six major subject areas or blocks, which are further broken down into several units with some units having several…

View of cell block eight (left), cell block seven, and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of cell block eight (left), cell block seven, and southwest guard tower, looking from cell block eight roof - Eastern State Penitentiary, 2125 Fairmount Avenue, Philadelphia, Philadelphia County, PA

Cell block eleven (left) and cell block fifteen, looking from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Cell block eleven (left) and cell block fifteen, looking from cell block two into the "Death Row" exercise yard - Eastern State Penitentiary, 2125 Fairmount Avenue, Philadelphia, Philadelphia County, PA

Block of calcium channels by enkephalin and somatostatin in neuroblastoma-glioma hybrid NG108-15 cells.

PubMed

Tsunoo, A; Yoshii, M; Narahashi, T

1986-12-01

Leucine-enkephalin, methionine-enkephalin, and morphine caused a reversible block of Ca2+ channel currents in neuroblastoma-glioma hybrid cells (NG108-15). The long-lasting (type 2) component of the Ca2+ channel current was blocked by leucine-enkephalin, while the transient (type 1) component was not affected. The enkephalin-induced blocking action was antagonized by naloxone and appears to be mediated by delta-opiate receptors. Two different aspects of the blocking effect were detected, a resting block and a recovery from block during prolonged depolarizing pulses. Recovery from block was more complete, and its time course was more rapid, with depolarization to more positive potentials. The dose dependence of the type 2 channel block at rest indicated a one-to-one binding stoichiometry, with an apparent dissociation constant of 8.8 nM. Somatostatin exerted a similar selective blocking action on the type 2 Ca2+ channel. The time- and voltage-dependent block of type 2 Ca2+ channels may provide a mechanism underlying the enkephalinergic presynaptic inhibition of transmitter release and the somatostatin block of pituitary growth hormone release.

Color Image Classification Using Block Matching and Learning

NASA Astrophysics Data System (ADS)

Kondo, Kazuki; Hotta, Seiji

In this paper, we propose block matching and learning for color image classification. In our method, training images are partitioned into small blocks. Given a test image, it is also partitioned into small blocks, and mean-blocks corresponding to each test block are calculated with neighbor training blocks. Our method classifies a test image into the class that has the shortest total sum of distances between mean blocks and test ones. We also propose a learning method for reducing memory requirement. Experimental results show that our classification outperforms other classifiers such as support vector machine with bag of keypoints.

Minimum Description Length Block Finder, a Method to Identify Haplotype Blocks and to Compare the Strength of Block Boundaries

PubMed Central

Mannila, H.; Koivisto, M.; Perola, M.; Varilo, T.; Hennah, W.; Ekelund, J.; Lukk, M.; Peltonen, L.; Ukkonen, E.

2003-01-01

We describe a new probabilistic method for finding haplotype blocks that is based on the use of the minimum description length (MDL) principle. We give a rigorous definition of the quality of a segmentation of a genomic region into blocks and describe a dynamic programming algorithm for finding the optimal segmentation with respect to this measure. We also describe a method for finding the probability of a block boundary for each pair of adjacent markers: this gives a tool for evaluating the significance of each block boundary. We have applied the method to the published data of Daly and colleagues. The results expose some problems that exist in the current methods for the evaluation of the significance of predicted block boundaries. Our method, MDL block finder, can be used to compare block borders in different sample sets, and we demonstrate this by applying the MDL-based method to define the block structure in chromosomes from population isolates. PMID:12761696

Minimum description length block finder, a method to identify haplotype blocks and to compare the strength of block boundaries.

PubMed

Mannila, H; Koivisto, M; Perola, M; Varilo, T; Hennah, W; Ekelund, J; Lukk, M; Peltonen, L; Ukkonen, E

2003-07-01

We describe a new probabilistic method for finding haplotype blocks that is based on the use of the minimum description length (MDL) principle. We give a rigorous definition of the quality of a segmentation of a genomic region into blocks and describe a dynamic programming algorithm for finding the optimal segmentation with respect to this measure. We also describe a method for finding the probability of a block boundary for each pair of adjacent markers: this gives a tool for evaluating the significance of each block boundary. We have applied the method to the published data of Daly and colleagues. The results expose some problems that exist in the current methods for the evaluation of the significance of predicted block boundaries. Our method, MDL block finder, can be used to compare block borders in different sample sets, and we demonstrate this by applying the MDL-based method to define the block structure in chromosomes from population isolates.

Novel ultrasound-guided inter-semispinal plane block: a comparative pilot study in healthy volunteers.

PubMed

Ohgoshi, Yuichi; Nishizakura, Ryo; Takahashi, Yuki; Takeda, Keisuke; Nakayama, Hirosuke; Kawamata, Mariko; Kurahashi, Kiyoyasu

2018-02-01

We previously reported that a novel multifidus cervicis plane (MCP) block could anesthetize the dorsal rami of the cervical spinal nerves. While MCP sonoanatomy is easily detectable in most patients, it is sometimes difficult to recognize the MCP injection plane, especially in elderly patients. Thus, we proposed the inter-semispinal plane (ISP) block as an alternative for the MCP block. The aim of this study was to evaluate the utility of the ISP block by evaluating the area and duration of anesthesia, compared with that of the MCP block in eight healthy volunteers. Each participant underwent unilateral ultrasound-guided MCP block and ISP block. For each block, 20 ml of ropivacaine 0.2% was injected, and the area of anesthesia was determined using the pinprick test. The anesthetic area ranged from C4 to T2 (3/8; 37.5%), T3 (2/8; 25%), or T4 (3/8; 37.5%) in the MCP block, and from C4 to T1 (1/8; 12.5%), T2 (3/8; 37.5%), T3 (2/8; 25%), or T4 (1/8; 12.5%) in the ISP block. The mean (standard deviation) duration of sensory loss following MCP and ISP blocks was 329 (77) min and 349 (70) min, respectively. Thus, the ISP block may be a reliable alternative to the MCP block.

Variation block-based genomics method for crop plants.

PubMed

Kim, Yul Ho; Park, Hyang Mi; Hwang, Tae-Young; Lee, Seuk Ki; Choi, Man Soo; Jho, Sungwoong; Hwang, Seungwoo; Kim, Hak-Min; Lee, Dongwoo; Kim, Byoung-Chul; Hong, Chang Pyo; Cho, Yun Sung; Kim, Hyunmin; Jeong, Kwang Ho; Seo, Min Jung; Yun, Hong Tai; Kim, Sun Lim; Kwon, Young-Up; Kim, Wook Han; Chun, Hye Kyung; Lim, Sang Jong; Shin, Young-Ah; Choi, Ik-Young; Kim, Young Sun; Yoon, Ho-Sung; Lee, Suk-Ha; Lee, Sunghoon

2014-06-15

In contrast with wild species, cultivated crop genomes consist of reshuffled recombination blocks, which occurred by crossing and selection processes. Accordingly, recombination block-based genomics analysis can be an effective approach for the screening of target loci for agricultural traits. We propose the variation block method, which is a three-step process for recombination block detection and comparison. The first step is to detect variations by comparing the short-read DNA sequences of the cultivar to the reference genome of the target crop. Next, sequence blocks with variation patterns are examined and defined. The boundaries between the variation-containing sequence blocks are regarded as recombination sites. All the assumed recombination sites in the cultivar set are used to split the genomes, and the resulting sequence regions are termed variation blocks. Finally, the genomes are compared using the variation blocks. The variation block method identified recurring recombination blocks accurately and successfully represented block-level diversities in the publicly available genomes of 31 soybean and 23 rice accessions. The practicality of this approach was demonstrated by the identification of a putative locus determining soybean hilum color. We suggest that the variation block method is an efficient genomics method for the recombination block-level comparison of crop genomes. We expect that this method will facilitate the development of crop genomics by bringing genomics technologies to the field of crop breeding.

Ultrasound description of Pecs II (modified Pecs I): a novel approach to breast surgery.

PubMed

Blanco, R; Fajardo, M; Parras Maldonado, T

2012-11-01

The Pecs block (pectoral nerves block) is an easy and reliable superficial block inspired by the infraclavicular block approach and the transversus abdominis plane blocks. Once the pectoralis muscles are located under the clavicle the space between the two muscles is dissected to reach the lateral pectoral and the medial pectoral nerves. The main indications are breast expanders and subpectoral prosthesis where the distension of these muscles is extremely painful. A second version of the Pecs block is described, called "modified Pecs block" or Pecs block type II. This novel approach aims to block at least the pectoral nerves, the intercostobrachial, intercostals III-IV-V-VI and the long thoracic nerve. These nerves need to be blocked to provide complete analgesia during breast surgery, and it is an alternative or a rescue block if paravertebral blocks and thoracic epidurals failed. This block has been used in our unit in the past year for the Pecs I indications described, and in addition for, tumorectomies, wide excisions, and axillary clearances. The ultrasound sequence to perform this block is shown, together with simple X-ray dye images and gadolinium MRI images to understand the spread and pathways that can explain the benefit of this novel approach. Copyright © 2012 Sociedad Española de Anestesiología, Reanimación y Terapéutica del Dolor. Published by Elsevier España. All rights reserved.

Learned perceptual associations influence visuomotor programming under limited conditions: kinematic consistency.

PubMed

Haffenden, Angela M; Goodale, Melvyn A

2002-12-01

Previous findings have suggested that visuomotor programming can make use of learned size information in experimental paradigms where movement kinematics are quite consistent from trial to trial. The present experiment was designed to test whether or not this conclusion could be generalized to a different manipulation of kinematic variability. As in previous work, an association was established between the size and colour of square blocks (e.g. red = large; yellow = small, or vice versa). Associating size and colour in this fashion has been shown to reliably alter the perceived size of two test blocks halfway in size between the large and small blocks: estimations of the test block matched in colour to the group of large blocks are smaller than estimations of the test block matched to the group of small blocks. Subjects grasped the blocks, and on other trials estimated the size of the blocks. These changes in perceived block size were incorporated into grip scaling only when movement kinematics were highly consistent from trial to trial; that is, when the blocks were presented in the same location on each trial. When the blocks were presented in different locations grip scaling remained true to the metrics of the test blocks despite the changes in perceptual estimates of block size. These results support previous findings suggesting that kinematic consistency facilitates the incorporation of learned perceptual information into grip scaling.

A randomized trial comparing surgeon-administered intraoperative transversus abdominis plane block with anesthesiologist-administered transcutaneous block.

PubMed

Narasimhulu, D M; Scharfman, L; Minkoff, H; George, B; Homel, P; Tyagaraj, K

2018-04-27

Injection of local anesthetic into the transversus abdominis plane (TAP block) decreases systemic morphine requirements after abdominal surgery. We compared intraoperative surgeon-administered TAP block (surgical TAP) to anesthesiologist-administered transcutaneous ultrasound-guided TAP block (conventional TAP) for post-cesarean analgesia. We hypothesized that surgical TAP blocks would take less time to perform than conventional TAP blocks. We performed a randomized trial, recruiting 41 women undergoing cesarean delivery under neuraxial anesthesia, assigning them to either surgical TAP block (n=20) or conventional TAP block (n=21). Time taken to perform the block was the primary outcome, while postoperative pain scores and 24-hour opioid requirements were secondary outcomes. Student's t-test was used to compare block time and Kruskal-Wallis test opioid consumption and pain-scores. Time taken to perform the block (2.4 vs 12.1 min, P <0.001), and time spent in the operating room after delivery (55.3 vs 77.9 min, P <0.001) were significantly less for surgical TAP. The 24 h morphine consumption (P=0.17) and postoperative pain scores at 4, 8, 24 and 48 h were not significantly different between the groups. Surgical TAP blocks are feasible and less time consuming than conventional TAP blocks, while providing comparable analgesia after cesarean delivery. Copyright © 2018 Elsevier Ltd. All rights reserved.

Ultrasound-Guided Single-Injection Infraclavicular Block Versus Ultrasound-Guided Double-Injection Axillary Block: A Noninferiority Randomized Controlled Trial.

PubMed

Boivin, Ariane; Nadeau, Marie-Josée; Dion, Nicolas; Lévesque, Simon; Nicole, Pierre C; Turgeon, Alexis F

2016-01-01

Single-injection ultrasound-guided infraclavicular block is a simple, reliable, and effective technique. A simplified double-injection ultrasound-guided axillary block technique with a high success rate recently has been described. It has the advantage of being performed in a superficial and compressible location, with a potentially improved safety profile. However, its effectiveness in comparison with single-injection infraclavicular block has not been established. We hypothesized that the double-injection ultrasound-guided axillary block would show rates of complete sensory block at 30 minutes noninferior to the single-injection ultrasound-guided infraclavicular block. After approval by our research ethics committee and written informed consent, adults undergoing distal upper arm surgery were randomized to either group I, ultrasound-guided single-injection infraclavicular block, or group A, ultrasound-guided double-injection axillary block. In group I, 30 mL of 1.5% mepivacaine was injected posterior to the axillary artery. In group A, 25 mL of 1.5% mepivacaine was injected posteromedial to the axillary artery, after which 5 mL was injected around the musculocutaneous nerve. Primary outcome was the rate of complete sensory block at 30 minutes. Secondary outcomes were the onset of sensory and motor blocks, surgical success rates, performance times, and incidence of complications. All outcomes were assessed by a blinded investigator. The noninferiority of the double-injection ultrasound-guided axillary block was considered if the limits of the 90% confidence intervals (CIs) were within a 10% margin of the rate of complete sensory block of the infraclavicular block. At 30 minutes, the rate of complete sensory block was 79% in group A (90% CI, 71%-85%) compared with 91% in group I (90% CI, 85%-95%); the upper limit of CI of group A is thus included in the established noninferiority margin of 10%. The rate of complete sensory block was lower in group A (proportion difference of 12% [95% CI, 2-22]; P = 0.0091), as was surgical success rate (82% [95% CI, 74%-89%] vs 93% [95% CI, 86%-97%]; proportion difference of 11% [95% CI 1-20]; P = 0.0153). Sensory block onset also was slower in group A (log rank test P = 0.0020). Performance times were faster in group I (231 seconds [95% CI, 213-250]) than in group A (358 seconds [95% CI, 332-387]; P < 0.0001). No statistically significant difference was observed for vascular puncture, paresthesia during block performance, or procedure-related pain. No neurologic complication was noted at follow-up. We failed to demonstrate that the rate of complete sensory block of the double-injection axillary block is noninferior to the single-injection infraclavicular block. However, the rate of complete sensory block at 30 minutes is statistically significantly lower with the axillary block. The ultrasound-guided single-injection infraclavicular block thus seems to be the preferred technique over the axillary for upper arm anesthesia.

Comparison of the Effect of Continuous Femoral Nerve Block and Adductor Canal Block after Primary Total Knee Arthroplasty.

PubMed

Seo, Seung Suk; Kim, Ok Gul; Seo, Jin Hyeok; Kim, Do Hoon; Kim, Youn Gu; Park, Beyoung Yun

2017-09-01

This study aimed to compare the effects of femoral nerve block and adductor canal block on postoperative pain, quadriceps strength, and walking ability after primary total knee arthroplasty. Between November 2014 and February 2015, 60 patients underwent primary total knee arthroplasty. Thirty patients received femoral nerve block and the other 30 received adductor canal block for postoperative pain control. Before spinal anesthesia, the patients received nerve block via a catheter (20 mL 0.75% ropivacaine was administered initially, followed by intermittent bolus injection of 10 mL 0.2% ropivacaine every 6 hours for 3 days). The catheters were maintained in the exact location of nerve block in 24 patients in the femoral nerve block group and in 19 patients in the adductor canal block group. Data collection was carried out from these 43 patients. To evaluate postoperative pain control, the numerical rating scale scores at rest and 45° flexion of the knee were recorded. To evaluate quadriceps strength, manual muscle testing was performed. Walking ability was assessed using the Timed Up and Go test. We also evaluated analgesic consumption and complications of peripheral nerve block. No significant intergroup difference was observed in the numerical rating scale scores at rest and 45° flexion of the knee on postoperative days 1, 2, 3, and 7. The adductor canal block group had significantly greater quadriceps strength than did the femoral nerve block group, as assessed by manual muscle testing on postoperative days 1, 2, and 3. The 2 groups showed no difference in walking ability on postoperative day 1, but on postoperative days 2, 3, walking ability was significantly better in the adductor canal block group than in the femoral nerve block group. No significant intergroup difference was observed in analgesic consumption. The groups showed no difference in postoperative pain control. Adductor canal block was superior to femoral nerve block in preserving quadriceps strength and walking ability. However, adductor canal block was inferior to femoral nerve block in maintaining the exact location of the catheter.

Coastal protection using topological interlocking blocks

NASA Astrophysics Data System (ADS)

Pasternak, Elena; Dyskin, Arcady; Pattiaratchi, Charitha; Pelinovsky, Efim

2013-04-01

The coastal protection systems mainly rely on the self-weight of armour blocks to ensure its stability. We propose a system of interlocking armour blocks, which form plate-shape assemblies. The shape and the position of the blocks are chosen in such a way as to impose kinematic constraints that prevent the blocks from being removed from the assembly. The topological interlocking shapes include simple convex blocks such as platonic solids, the most practical being tetrahedra, cubes and octahedra. Another class of topological interlocking blocks is so-called osteomorphic blocks, which form plate-like assemblies tolerant to random block removal (almost 25% of blocks need to be removed for the assembly to loose integrity). Both classes require peripheral constraint, which can be provided either by the weight of the blocks or post-tensioned internal cables. The interlocking assemblies provide increased stability because lifting one block involves lifting (and bending) the whole assembly. We model the effect of interlocking by introducing an equivalent additional self-weight of the armour blocks. This additional self-weight is proportional to the critical pressure needed to cause bending of the interlocking assembly when it loses stability. Using beam approximation we find an equivalent stability coefficient for interlocking. It is found to be greater than the stability coefficient of a structure with similar blocks without interlocking. In the case when the peripheral constraint is provided by the weight of the blocks and for the slope angle of 45o, the effective stability coefficient for a structure of 100 blocks is 33% higher than the one for a similar structure without interlocking. Further increase in the stability coefficient can be reached by a specially constructed peripheral constraint system, for instance by using post-tension cables.

A comparison of ultrasound-guided interscalene and supraclavicular blocks for post-operative analgesia after shoulder surgery.

PubMed

Kim, B G; Han, J U; Song, J H; Yang, C; Lee, B W; Baek, J S

2017-04-01

In contrast to interscalene block, there was little information regarding the analgesic efficacy of supraclavicular block for shoulder surgery. This study aimed to compare the analgesic efficacy and side effects of interscalene and supraclavicular blocks for shoulder surgery. Patients scheduled for shoulder surgery were assigned to receive either ultrasound-guided interscalene (n = 25) or supraclavicular block (n = 24) with 20 ml of 0.375% ropivacaine. We assessed the duration of post-operative analgesia as a primary outcome and pain scores, supplemental analgesia, diaphragmatic excursion, motor block, fingertip numbness, side effects, and patient satisfaction as secondary outcomes. The duration of post-operative analgesia was not statistically different between groups: 868 (800-1440) min for supraclavicular block vs. 800 (731-922) min for interscalene block (median difference -85 min, 95% CI, -283 to 3 min, P = 0.095). The incidence of diaphragmatic paresis was significantly lower in the supraclavicular block group compared with that in the interscalene block group, both at 30 min after the block (66.7% vs. 92%, P = 0.021) and in the post-anaesthesia care unit (62.5% vs. 92%, P = 0.024). Motor block was higher in the supraclavicular block group in the post-anaesthesia care unit, however, not at 24 h. Other secondary outcomes were similar for both groups. This study showed no statistically significant difference in the duration of post-operative analgesia between the supraclavicular and interscalene blocks. However, the supraclavicular block was associated with a lower incidence of diaphragmatic paresis compared with that of the interscalene block after shoulder surgery. © 2017 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Effects of strychnine on the sodium conductance of the frog node of Ranvier

PubMed Central

1977-01-01

Strychnine blocks sodium conductance in the frog node of Ranvier. This block was studied by reducing and slowing sodium inactivation with scorpion venom. The block is voltage and time dependent. The more positive the axoplasm the greater the block and the faster the approach to equilibrium. Some evidence is presented suggesting that only open channels can be blocked. The block is reduced by raising external sodium or lithium but not impermeant cations. A quaternary derivative of strychnine was synthesized and found to have the same action only when applied intracellularly. We conclude that strychnine blocks sodium channels by a mechanism analogous to that by which it blocks potassium channels. The potassium channel block had previously been found to be identical to that by tetraethylammonium ion derivatives. In addition, strychnine resembles procaine and its derivatives in both its structure and the mechanism of sodium channel block. PMID:302321

Distribution of short block copolymer chains in Binary Blends of Block Copolymers Having Hydrogen Bonding

NASA Astrophysics Data System (ADS)

Kwak, Jongheon; Han, Sunghyun; Kim, Jin Kon

2014-03-01

A binary mixture of two block copolymers whose blocks are capable of forming the hydrogen bonding allows one to obtain various microdomains that could not be expected for neat block copolymer. For instance, the binary blend of symmetric polystyrene-block-poly(2-vinylpyridine) copolymer (PS-b-P2VP) and polystyrene-block-polyhydroxystyrene copolymer (PS-b-PHS) blends where the hydrogen bonding occurred between P2VP and PHS showed hexagonally packed (HEX) cylindrical and body centered cubic (BCC) spherical microdomains. To know the exact location of short block copolymer chains at the interface, we synthesized deuterated polystyrene-block-polyhydroxystyrene copolymer (dPS-b-PHS) and prepared a binary mixture with PS-b-P2VP. We investigate, via small angle X-ray scattering (SAXS) and neutron reflectivity (NR), the exact location of shorter dPS block chain near the interface of the microdomains.

Objective and subjective measures indicate that orthographically similar words produce a blocking experience.

PubMed

Leynes, P Andrew; Brown, Jaime; Landau, Joshua D

2011-01-01

Memory blocks are a common experience characterised by inappropriate retrieval of information that impairs memory search processes. In five studies, memory blocks were induced via exposure to orthographically similar words (Smith & Tindell, 1997) while participants reported their subjective experiences to determine whether the memory block effect (MBE) paradigm produces a feeling of being blocked. Experiments 1 and 3 provided evidence that the MBE is associated with more blocked experiences. In Experiments 2 and 4 increased blocking experiences correlated with blocked fragments when the experimental manipulation was disguised, which demonstrates that ratings were not contaminated by demand characteristics. Experiment 5 demonstrated that blocking happens even when there is no study list. Collectively, the subjective retrieval ratings and the objective response data provide converging evidence that exposure to orthographically similar words induces a memory block characterised by an ineffective memory search that perseverates on interfering information.

The Relationship Between Extratropical Cyclone Steering and Blocking Along the North American East Coast

NASA Astrophysics Data System (ADS)

Booth, James F.; Dunn-Sigouin, Etienne; Pfahl, Stephan

2017-12-01

The path and speed of extratropical cyclones along the east coast of North America influence their societal impact. This work characterizes the climatological relationship between cyclone track path and speed, and blocking and the North Atlantic Oscillation (NAO). An analysis of Lagrangian cyclone track propagation speed and angle shows that the percentage of cyclones with blocks is larger for cyclones that propagate northward or southeastward, as is the size of the blocked region near the cyclone. Cyclone-centered composites show that propagation of cyclones relative to blocks is consistent with steering by the block: northward tracks more often have a block east/northeast of the cyclone; slow tracks tend to have blocks due north of the cyclone. Comparison with the NAO shows that to first-order blocking and the NAO steer cyclones in a similar manner. However, blocked cyclones are more likely to propagate northward, increasing the likelihood of cyclone related impacts.

Can We Perform Distal Nerve Block Instead of Brachial Plexus Nerve Block Under Ultrasound Guidance for Hand Surgery?

PubMed Central

Ince, Ilker; Aksoy, Mehmet; Celik, Mine

2016-01-01

Objective: Distal nerve blocks are used in the event of unsuccessful blocks as rescue techniques. The primary purpose of this study was to determine the sufficiency for anesthesia of distal nerve block without the need for deep sedation or general anesthesia. The secondary purpose was to compare block performance times, block onset times, and patient and surgeon satisfaction. Materials and Methods: Patients who underwent hand surgery associated with the innervation area of the radial and median nerves were included in the study. Thirty-four patients who were 18–65 years old and American Society of Anesthesiologists grade I–III and who were scheduled for elective hand surgery under conscious nerve block anesthesia were randomly included in an infraclavicular block group (Group I, n=17) or a radial plus median block group (Group RM, n=17). The block performance time, block onset time, satisfaction of the patient and surgeon, and number of fentanyl administrations were recorded. Results: The numbers of patients who needed fentanyl administration and conversion to general anesthesia were the same in Group I and Group RM and there was no statistically significant difference (p>0.05). The demographics, surgery times, tourniquet times, block perfomance times, and patient and surgeon satisfaction of the groups were similar and there were no statistically significant differences (p>0.05). There was a statistically significant difference in block onset times between the groups (p<0.05). Conclusions: Conscious hand surgery can be performed under distal nerve block anesthesia safely and successfully. PMID:28149139

Highχ block copolymers for directed self-assembly patterning without the need for topcoat or solvent annealing

NASA Astrophysics Data System (ADS)

Xu, Kui; Hockey, Mary Ann; Calderas, Eric; Guerrero, Douglas; Sweat, Daniel; Fiehler, Jeffrey

2017-03-01

High-χ block copolymers for directed self-assembly (DSA) patterning that do not need topcoat or solvent annealing have been developed. A variety of functionalities have been successfully added into the block copolymers, such as balanced surface energy between the polymer blocks, outstandingly high χ, tunable glass transition temperature (Tg), and selective crosslinking. Perpendicular orientation control, as desired for patterning, of the block copolymers can be simply achieved by thermal annealing due to the equal surface energy of the polymer blocks at the annealing temperatures, which allows avoiding solvent annealing or top-coat. The χ value can be tuned up to achieve L0 as low as 8-10 nm for lamellar-structured block copolymers and hole/pillar size as small as 5-6 nm for cylinder-structured block copolymers. The Tg of the block copolymers can be tuned to improve the kinetics of thermal annealing by enhancing the polymer chain mobility. Block-selective crosslinking facilitates the pattern transfer by mitigating pattern collapse during wet etching and improving oxygen plasma etching selectivity between the polymer blocks. This paper provides an introductory review of our high-χ block copolymer materials with various functionalities for achieving improved DSA performance.

A 2d Block Model For Landslide Simulation: An Application To The 1963 Vajont Case

NASA Astrophysics Data System (ADS)

Tinti, S.; Zaniboni, F.; Manucci, A.; Bortolucci, E.

A 2D block model to study the motion of a sliding mass is presented. The slide is par- titioned into a matrix of blocks the basis of which are quadrilaterals. The blocks move on a specified sliding surface and follow a trajectory that is computed by the model. The forces acting on the blocks are gravity, basal friction, buoyancy in case of under- water motion, and interaction with neighbouring blocks. At any time step, the position of the blocks on the sliding surface is determined in curvilinear (local) co-ordinates by computing the position of the vertices of the quadrilaterals and the position of the block centre of mass. Mathematically, the topology of the system is invariant during the motion, which means that the number of blocks is constant and that each block has always the same neighbours. Physically, this means that blocks are allowed to change form, but not to penetrate into each other, not to coalesce, not to split. The change of form is compensated by the change of height, under the computational assumption that the block volume is constant during motion: consequently lateral expansion or contraction yield respectively height reduction or increment of the blocks. This model is superior to the analogous 1D model where the mass is partitioned into a chain of interacting blocks. 1D models require the a-priori specification of the sliding path, that is of the trajectory of the blocks, which the 2D block model supplies as one of its output. In continuation of previous studies on the catastrophic slide of Vajont that occurred in 1963 in northern Italy and caused more than 2000 victims, the 2D block model has been applied to the Vajont case. The results are compared to the outcome of the 1D model, and more importantly to the observational data concerning the deposit position and morphology. The agreement between simulation and data is found to be quite good.

Optimization of fly ash and bottom ash substitution against paving block manufacture according to SNI 03-0691-1996

NASA Astrophysics Data System (ADS)

Karolina, R.; Syahrizal; Bahri, N.

2018-02-01

The waste of coal burning has a very negative impact on the environment if the waste is not managed as well as possible. The remaining waste of coal combustion consists of fly ash and bottom ash. FA and BA can be developed into substitution materials in the process of making paving blocks. The purpose of this study was to determine the quality of paving block in accordance with SK SNI 03-0691-1996 with optimization in the use of FA and BA. This study uses a 351 paving block sample size of 20x10x6 cm. Paving blocks are divided by 4 categories, namely normal paving block, paving block with FA substitution, BA substitution and combination of FA-BA with each variation 0%, 25%, 50%, 75% and 100%. Each variation amounted to 27 samples. Paving block quality measurement is done through 4 tests: absorption, compressive strength, sodium sulphate resistance and Los Angeles tests. The result of the test shows the absorption of normal paving block is 3,229%, paving block with 25% FA is 3,889%, paving block with 50% BA is 5,560% and paving block with 25% FA-BA combination is 5,794%. Compressive strength in normal paving block is 25,50 MPa, paving block with 25% FA is 25,28 MPa, paving block with 25% BA is equal to 27,61 MPa and paving block with 25% FA-BA is 26, 00 MPa. In testing of sodium sulfate resistance, almost all test specimens are eligible except for paving block with 50% FA and 75% FA. In the test of wear resistance, no specimen is eligible according to SK SNI 03-0691-1996. The comparison of the strength of the test specimen can be seen in substitution with 25% BA which reaches maximum strength.

Patients' and procedural characteristics of AV-block during slow pathway modulation for AVNRT-single center 10year experience.

PubMed

Wasmer, Kristina; Dechering, Dirk G; Köbe, Julia; Leitz, Patrick; Frommeyer, Gerrit; Lange, Phillip S; Kochhäuser, Simon; Reinke, Florian; Pott, Christian; Mönnig, Gerold; Breithardt, Günter; Eckardt, Lars

2017-10-01

Permanent AV-block is a recognized and feared complication of slow pathway modulation for AVNRT. We aimed to assess incidence of transient and permanent AV-block as well as consequences of transient AV-block in a large contemporary AVNRT ablation cohort. We searched our single center prospective ablation database for occurrence of transient and permanent AV-block during slow pathway modulation between January 2004 and October 2015. We analyzed patients' and procedural characteristics as well as outcome of patients in whom transient or permanent AV-block occurred. Of 9170 patients who underwent a catheter ablation at our institution between January 2004 and October 2015, 2101 patients (64% women, mean age 50±18years) underwent slow pathway modulation. In three patients, permanent AV-block occurred during RF application. Additional two patients had transient AV-block that recovered (after a few minutes and 25min), but recurred within two days of the procedure. All five patients underwent dual chamber pacemaker implantation (0.2%). Transient AV-block related to RF delivery occurred in 44 patients (2%). Transient mechanical AV-block occurred in additional 17 patients (0.8%). In 12 patients, ablation was continued despite transient AV-block. One of these patients developed permanent AV-block. Permanent AV-block following slow pathway modulation is a rare event, occurring in 0.2% of patients in a large contemporary single center cohort. Transient AV-block is more frequent (2%). Copyright © 2017 Elsevier B.V. All rights reserved.

49 CFR 236.827 - System, block signal.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false System, block signal. 236.827 Section 236.827... System, block signal. A method of governing the movement of trains into or within one or more blocks by block signals or cab signals. ...

General view of east yard, facing south (note from right ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of east yard, facing south (note from right to left: cell block fourteen, cell block eleven, cell block fifteen, cell block two, greenhouse, and cell block ten) - Eastern State Penitentiary, 2125 Fairmount Avenue, Philadelphia, Philadelphia County, PA

Self-doped microphase separated block copolymer electrolyte

DOEpatents

Mayes, Anne M.; Sadoway, Donald R.; Banerjee, Pallab; Soo, Philip; Huang, Biying

2002-01-01

A polymer electrolyte includes a self-doped microphase separated block copolymer including at least one ionically conductive block and at least one second block that is immiscible in the ionically conductive block, an anion immobilized on the polymer electrolyte and a cationic species. The ionically conductive block provides a continuous ionically conductive pathway through the electrolyte. The electrolyte may be used as an electrolyte in an electrochemical cell.

Self-recovery reversible image watermarking algorithm

PubMed Central

Sun, He; Gao, Shangbing; Jin, Shenghua

2018-01-01

The integrity of image content is essential, although most watermarking algorithms can achieve image authentication but not automatically repair damaged areas or restore the original image. In this paper, a self-recovery reversible image watermarking algorithm is proposed to recover the tampered areas effectively. First of all, the original image is divided into homogeneous blocks and non-homogeneous blocks through multi-scale decomposition, and the feature information of each block is calculated as the recovery watermark. Then, the original image is divided into 4×4 non-overlapping blocks classified into smooth blocks and texture blocks according to image textures. Finally, the recovery watermark generated by homogeneous blocks and error-correcting codes is embedded into the corresponding smooth block by mapping; watermark information generated by non-homogeneous blocks and error-correcting codes is embedded into the corresponding non-embedded smooth block and the texture block via mapping. The correlation attack is detected by invariant moments when the watermarked image is attacked. To determine whether a sub-block has been tampered with, its feature is calculated and the recovery watermark is extracted from the corresponding block. If the image has been tampered with, it can be recovered. The experimental results show that the proposed algorithm can effectively recover the tampered areas with high accuracy and high quality. The algorithm is characterized by sound visual quality and excellent image restoration. PMID:29920528

Formation of nanophases in epoxy thermosets containing amphiphilic block copolymers with linear and star-like topologies.

PubMed

Wang, Lei; Zhang, Chongyin; Cong, Houluo; Li, Lei; Zheng, Sixun; Li, Xiuhong; Wang, Jie

2013-07-11

In this work, we investigated the effect of topological structures of block copolymers on the formation of the nanophase in epoxy thermosets containing amphiphilic block copolymers. Two block copolymers composed of poly(ε-caprolactone) (PCL) and poly(2,2,2-trifluoroethyl acrylate) (PTFEA) blocks were synthesized to possess linear and star-shaped topologies. The star-shaped block copolymer composed a polyhedral oligomeric silsesquioxane (POSS) core and eight poly(ε-caprolactone)-block-poly(2,2,2-trifluoroethyl acrylate) (PCL-b-PTFEA) diblock copolymer arms. Both block copolymers were synthesized via the combination of ring-opening polymerization and reversible addition-fragmentation chain transfer/macromolecular design via the interchange of xanthate (RAFT/MADIX) process; they were controlled to have identical compositions of copolymerization and lengths of blocks. Upon incorporating both block copolymers into epoxy thermosets, the spherical PTFEA nanophases were formed in all the cases. However, the sizes of PTFEA nanophases from the star-like block copolymer were significantly lower than those from the linear diblock copolymer. The difference in the nanostructures gave rise to the different glass transition behavior of the nanostructured thermosets. The dependence of PTFEA nanophases on the topologies of block copolymers is interpreted in terms of the conformation of the miscible subchain (viz. PCL) at the surface of PTFEA microdomains and the restriction of POSS cages on the demixing of the thermoset-philic block (viz. PCL).

View southeast of caps for blocks for JFK; blocks are ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View southeast of caps for blocks for JFK; blocks are used to support ship when it is repositioned to paint inaccessible areas masked by original support blocks. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Carpentry Shop, League Island, Philadelphia, Philadelphia County, PA

SSE-based Thomas algorithm for quasi-block-tridiagonal linear equation systems, optimized for small dense blocks

NASA Astrophysics Data System (ADS)

Barnaś, Dawid; Bieniasz, Lesław K.

2017-07-01

We have recently developed a vectorized Thomas solver for quasi-block tridiagonal linear algebraic equation systems using Streaming SIMD Extensions (SSE) and Advanced Vector Extensions (AVX) in operations on dense blocks [D. Barnaś and L. K. Bieniasz, Int. J. Comput. Meth., accepted]. The acceleration caused by vectorization was observed for large block sizes, but was less satisfactory for small blocks. In this communication we report on another version of the solver, optimized for small blocks of size up to four rows and/or columns.

Colostomy with Transversus Abdominis Plane Block

PubMed Central

Tekelioğlu, Ümit Yaşar; Demirhan, Abdullah; Şit, Mustafa; Kurt, Adem Deniz; Bilgi, Murat; Koçoğlu, Hasan

2015-01-01

Transversus abdominis plane (TAP) block is one of the abdominal field block. The TAP block is used for both anaesthetic management and post-operative pain therapy in lower abdominal surgery. TAP block is a procedure in which local anaesthetic agents are applied to the anatomic neurofacial space between the internal oblique and the transversus abdominis muscle. TAP block is a good method for post-operative pain control as well as allows for short operations involving the abdominal area. In this article, a case of colostomy under TAP block is presented. PMID:27366540

Rapid self-assembly of block copolymers to photonic crystals

DOEpatents

Xia, Yan; Sveinbjornsson, Benjamin R; Grubbs, Robert H; Weitekamp, Raymond; Miyake, Garret M; Atwater, Harry A; Piunova, Victoria; Daeffler, Christopher Scot; Hong, Sung Woo; Gu, Weiyin; Russell, Thomas P.

2016-07-05

The invention provides a class of copolymers having useful properties, including brush block copolymers, wedge-type block copolymers and hybrid wedge and polymer block copolymers. In an embodiment, for example, block copolymers of the invention incorporate chemically different blocks comprising polymer size chain groups and/or wedge groups that significantly inhibit chain entanglement, thereby enhancing molecular self-assembly processes for generating a range of supramolecular structures, such as periodic nanostructures and microstructures. The present invention also provides useful methods of making and using copolymers, including block copolymers.

Ultrasound-guided bilateral greater occipital nerve block for the treatment of post-dural puncture headache

PubMed Central

Akyol, Fethi; Binici, Orhan; Kuyrukluyildiz, Ufuk; Karabakan, Guldane

2015-01-01

Background and Objective: Post-dural puncture headache (PDPH) is one of the complications frequently observed after spinal or epidural anesthesia with dural penetration. For PDPH patients who do not respond to conservative medical treatment, alternative treatments such as bilateral occipital nerve block should be considered.In this study the efficacy of bilateral occipital nerve block was retrospectively evaluated in patients with post-dural puncture headache. Methods: Ultrasound-guided bilateral occipital nerve block was administrated in 21 patients who developed PDPH after spinal anesthesia, but did not respond to conservative medical treatment within 48 hours between January 2012 and February 2014. The study was conducted at Erzincan University Faculty of Medicine Gazi Mengucek Education and Research Hospital Results: Mean Visual Analog Scale (VAS) pain scores at 10 minutes and 6, 10, 15 and 24 hours after the block were significantly improved compared to the patients with a pre-block VAS score between 4 and 6 as well as patients with a pre-block VAS score between 7 and 9 (p<0.01). After 24 hours of the block applied, VAS pain score dropped to 1 for all 12 patients who had a pre-block VAS score between 4 and 6. Whereas, VAS score decreased to 2 at 24 hours after the block in only one of the patients with a pre-block VAS between 7 and 9. For the patients with a pre-block VAS score between 7 and 9, there was no significant improvement in the mean VAS score 24 hours after the block. Conclusions: For patients with PDPH and a pre-block VAS score between 4 and 6 who do not respond to conservative medical treatment, an ultrasound-guided bilateral occipital nerve block may be effective. PMID:25878625

Gaussian curvature analysis allows for automatic block placement in multi-block hexahedral meshing.

PubMed

Ramme, Austin J; Shivanna, Kiran H; Magnotta, Vincent A; Grosland, Nicole M

2011-10-01

Musculoskeletal finite element analysis (FEA) has been essential to research in orthopaedic biomechanics. The generation of a volumetric mesh is often the most challenging step in a FEA. Hexahedral meshing tools that are based on a multi-block approach rely on the manual placement of building blocks for their mesh generation scheme. We hypothesise that Gaussian curvature analysis could be used to automatically develop a building block structure for multi-block hexahedral mesh generation. The Automated Building Block Algorithm incorporates principles from differential geometry, combinatorics, statistical analysis and computer science to automatically generate a building block structure to represent a given surface without prior information. We have applied this algorithm to 29 bones of varying geometries and successfully generated a usable mesh in all cases. This work represents a significant advancement in automating the definition of building blocks.

Method for achieving sustained anisotropic crystal growth on the surface of a silicon melt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mackintosh, Brian H.; Kellerman, Peter L.; Sun, Dawei

An apparatus for growing a crystalline sheet from a melt includes a cold block assembly. The cold block assembly may include a cold block and a shield surrounding the cold block and being at an elevated temperature with respect to that of the cold block, the shield defining an opening disposed along a surface of the cold block proximate a melt surface that defines a cold area comprising a width along a first direction of the cold block, the cold area operable to provide localized cooling of a region of the melt surface proximate the cold block. The apparatus maymore » further include a crystal puller arranged to draw a crystalline seed in a direction perpendicular to the first direction when the cold block assembly is disposed proximate the melt surface.« less

Perioperative transversus abdominis plane (TAP) blocks for analgesia after abdominal surgery.

PubMed

Charlton, Shona; Cyna, Allan M; Middleton, Philippa; Griffiths, James D

2010-12-08

The transversus abdominis plane (TAP) block is a peripheral nerve block which anaesthetises the abdominal wall. The increasing use of TAP block, as a form of pain relief after abdominal surgery warrants evaluation of its effectiveness as an adjunctive technique to routine care and, when compared with other analgesic techniques. To assess effects of TAP blocks (and variants) on postoperative analgesia requirements after abdominal surgery. We searched specialised registers of Cochrane Anaesthesia and Cochrane Pain, Palliative and Supportive Care Review Groups, CENTRAL, MEDLINE, EMBASE and CINAHL to June 2010. We included randomised controlled trials (RCTs) comparing TAP block or rectus sheath block with: no TAP or rectus sheath block; placebo; systemic, epidural or any other analgesia. At least two review authors assessed study eligibility and risk of bias, and extracted data. We included eight studies (358 participants), five assessing TAP blocks, three assessing rectus sheath blocks; with moderate risk of bias overall. All studies had a background of general anaesthesia in both arms in most cases.Compared with no TAP block or saline placebo, TAP block resulted in significantly less postoperative requirement for morphine at 24 hours (mean difference (MD) -21.95 mg, 95% confidence interval (CI) -37.91 to 5.96; five studies, 236 participants) and 48 hours (MD -28.50, 95% CI -38.92 to -18.08; one study of 50 participants) but not at two hours (all random-effects analyses). Pain at rest was significantly reduced in two studies, but not a third.Only one of three included studies of rectus sheath blocks found a reduction in postoperative analgesic requirements in participants receiving blocks. One study, assessing number of participants who were pain-free after their surgery, found more participants who received a rectus sheath block to be pain-free for up to 10 hours postoperatively. As with TAP blocks, rectus sheath blocks made no apparent impact on nausea and vomiting or sedation scores. No studies have compared TAP block with other analgesics such as epidural analgesia or local anaesthetic infiltration into the abdominal wound. There is only limited evidence to suggest use of perioperative TAP block reduces opioid consumption and pain scores after abdominal surgery when compared with no intervention or placebo. There is no apparent reduction in postoperative nausea and vomiting or sedation from the small numbers of studies to date. Many relevant studies are currently underway or awaiting publication.

Directional filtering for block recovery using wavelet features

NASA Astrophysics Data System (ADS)

Hyun, Seung H.; Eom, Il K.; Kim, Yoo S.

2005-07-01

When images compressed with block-based compression techniques are transmitted over a noisy channel, unexpected block losses occur. Conventional methods that do not consider edge directions can cause blocked blurring artifacts. In this paper, we present a post-processing-based block recovery scheme using Haar wavelet features. The adaptive selection of neighboring blocks is performed based on the energy of wavelet subbands (EWS) and difference between DC values (DDC). The lost blocks are recovered by linear interpolation in the spatial domain using selected blocks. The method using only EWS performs well for horizontal and vertical edges, but not as well for diagonal edges. Conversely, only using DDC performs well for diagonal edges with the exception of line- or roof-type edge profiles. Therefore, we combine EWS and DDC for better results. The proposed directional recovery method is effective for the strong edge because exploit the varying neighboring blocks adaptively according to the edges and the directional information in the image. The proposed method outperforms the previous methods that used only fixed blocks.

The computation of 15 deg and 10 deg equal area block terrestrial free air gravity anomalies

NASA Technical Reports Server (NTRS)

Hajela, D. P.

1973-01-01

Starting with the set of 23,355 1 deg x 1 deg mean free air gravity anomalies used in Rapp (1972) to form a 5 deg equal area block terrestrial gravity field, the computation of 15 deg equal area block mean free air gravity anomalies is described along with estimates of their standard deviations. A new scheme of an integral division of a 15 deg block into 9 component 300 n. m. blocks, and each 300 n. m. block being subdivided into 25 60 n.mi. blocks, is used. This insures that there is no loss in accuracy, which would have resulted if proportional values according to area were taken of the 5 deg equal area anomalies to form the 15 deg block anomalies. A similar scheme is used for the computation of 10 deg equal area block mean free air gravity anomalies with estimates of their standard deviations. The scheme is general enough to be used for a 30 deg equal area block terrestrial gravity field.

Block Volume Estimation from the Discontinuity Spacing Measurements of Mesozoic Limestone Quarries, Karaburun Peninsula, Turkey

PubMed Central

Elci, Hakan; Turk, Necdet

2014-01-01

Block volumes are generally estimated by analyzing the discontinuity spacing measurements obtained either from the scan lines placed over the rock exposures or the borehole cores. Discontinuity spacing measurements made at the Mesozoic limestone quarries in Karaburun Peninsula were used to estimate the average block volumes that could be produced from them using the suggested methods in the literature. The Block Quality Designation (BQD) ratio method proposed by the authors has been found to have given in the same order of the rock block volume to the volumetric joint count (J v) method. Moreover, dimensions of the 2378 blocks produced between the years of 2009 and 2011 in the working quarries have been recorded. Assuming, that each block surfaces is a discontinuity, the mean block volume (V b), the mean volumetric joint count (J vb) and the mean block shape factor of the blocks are determined and compared with the estimated mean in situ block volumes (V in) and volumetric joint count (J vi) values estimated from the in situ discontinuity measurements. The established relations are presented as a chart to be used in practice for estimating the mean volume of blocks that can be obtained from a quarry site by analyzing the rock mass discontinuity spacing measurements. PMID:24696642

Powered Explicit Guidance Modifications and Enhancements for Space Launch System Block-1 and Block-1B Vehicles

NASA Technical Reports Server (NTRS)

Von der Porten, Paul; Ahmad, Naeem; Hawkins, Matt; Fill, Thomas

2018-01-01

NASA is currently building the Space Launch System (SLS) Block-1 launch vehicle for the Exploration Mission 1 (EM-1) test flight. NASA is also currently designing the next evolution of SLS, the Block-1B. The Block-1 and Block-1B vehicles will use the Powered Explicit Guidance (PEG) algorithm (of Space Shuttle heritage) for closed loop guidance. To accommodate vehicle capabilities and design for future evolutions of SLS, modifications were made to PEG for Block-1 to handle multi-phase burns, provide PEG updated propulsion information, and react to a core stage engine out. In addition, due to the relatively low thrust-to-weight ratio of the Exploration Upper Stage (EUS) and EUS carrying out Lunar Vicinity and Earth Escape missions, certain enhancements to the Block-1 PEG algorithm are needed to perform Block-1B missions to account for long burn arcs and target translunar and hyperbolic orbits. This paper describes the design and implementation of modifications to the Block-1 PEG algorithm as compared to Space Shuttle. Furthermore, this paper illustrates challenges posed by the Block-1B vehicle and the required PEG enhancements. These improvements make PEG capable for use on the SLS Block-1B vehicle as part of the Guidance, Navigation, and Control (GN&C) System.

Block volume estimation from the discontinuity spacing measurements of mesozoic limestone quarries, Karaburun Peninsula, Turkey.

PubMed

Elci, Hakan; Turk, Necdet

2014-01-01

Block volumes are generally estimated by analyzing the discontinuity spacing measurements obtained either from the scan lines placed over the rock exposures or the borehole cores. Discontinuity spacing measurements made at the Mesozoic limestone quarries in Karaburun Peninsula were used to estimate the average block volumes that could be produced from them using the suggested methods in the literature. The Block Quality Designation (BQD) ratio method proposed by the authors has been found to have given in the same order of the rock block volume to the volumetric joint count (J(v)) method. Moreover, dimensions of the 2378 blocks produced between the years of 2009 and 2011 in the working quarries have been recorded. Assuming, that each block surfaces is a discontinuity, the mean block volume (V(b)), the mean volumetric joint count (J(vb)) and the mean block shape factor of the blocks are determined and compared with the estimated mean in situ block volumes (V(in)) and volumetric joint count (J(vi)) values estimated from the in situ discontinuity measurements. The established relations are presented as a chart to be used in practice for estimating the mean volume of blocks that can be obtained from a quarry site by analyzing the rock mass discontinuity spacing measurements.

21 CFR 882.1925 - Ultrasonic scanner calibration test block.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ultrasonic scanner calibration test block. 882... Ultrasonic scanner calibration test block. (a) Identification. An ultrasonic scanner calibration test block is a block of material with known properties used to calibrate ultrasonic scanning devices (e.g., the...

49 CFR 236.824 - System, automatic block signal.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false System, automatic block signal. 236.824 Section..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.824 System, automatic block signal. A block signal system wherein the use of each block is...

The Snack Shop: Block Play in a Primary Classroom.

ERIC Educational Resources Information Center

Harris, Teresa

1994-01-01

Describes a block play activity undertaken in a kindergarten through second-grade multiage classroom, in which children used blocks and various other props to construct and operate an imaginary snack shop. Discusses the benefits of block play and guidelines for teachers to follow in establishing block play activities. (MDM)

49 CFR 236.824 - System, automatic block signal.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false System, automatic block signal. 236.824 Section..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.824 System, automatic block signal. A block signal system wherein the use of each block is...

49 CFR 236.824 - System, automatic block signal.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false System, automatic block signal. 236.824 Section..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.824 System, automatic block signal. A block signal system wherein the use of each block is...

Subcostal Transverse Abdominis Plane Block for Acute Pain Management: A Review.

PubMed

Soliz, Jose M; Lipski, Ian; Hancher-Hodges, Shannon; Speer, Barbra Bryce; Popat, Keyuri

2017-10-01

The subcostal transverse abdominis plane (SCTAP) block is the deposition of local anesthetic in the transverse abdominis plane inferior and parallel to the costal margin. There is a growing consensus that the SCTAP block provides better analgesia for upper abdominal incisions than the traditional transverse abdominis plane block. In addition, when used as part of a four-quadrant transverse abdominis plane block, the SCTAP block may provide adequate analgesia for major abdominal surgery. The purpose of this review is to discuss the SCTAP block, including its indications, technique, local anesthetic solutions, and outcomes.

Method of forming oriented block copolymer line patterns, block copolymer line patterns formed thereby, and their use to form patterned articles

DOEpatents

Russell, Thomas P.; Hong, Sung Woo; Lee, Doug Hyun; Park, Soojin; Xu, Ting

2015-10-13

A block copolymer film having a line pattern with a high degree of long-range order is formed by a method that includes forming a block copolymer film on a substrate surface with parallel facets, and annealing the block copolymer film to form an annealed block copolymer film having linear microdomains parallel to the substrate surface and orthogonal to the parallel facets of the substrate. The line-patterned block copolymer films are useful for the fabrication of magnetic storage media, polarizing devices, and arrays of nanowires.

Method of forming oriented block copolymer line patterns, block copolymer line patterns formed thereby, and their use to form patterned articles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Russell, Thomas P.; Hong, Sung Woo; Lee, Dong Hyun

A block copolymer film having a line pattern with a high degree of long-range order is formed by a method that includes forming a block copolymer film on a substrate surface with parallel facets, and annealing the block copolymer film to form an annealed block copolymer film having linear microdomains parallel to the substrate surface and orthogonal to the parallel facets of the substrate. The line-patterned block copolymer films are useful for the fabrication of magnetic storage media, polarizing devices, and arrays of nanowires.

Active angular alignment of gauge blocks in double-ended interferometers.

PubMed

Buchta, Zdeněk; Reřucha, Simon; Hucl, Václav; Cížek, Martin; Sarbort, Martin; Lazar, Josef; Cíp, Ondřej

2013-09-27

This paper presents a method implemented in a system for automatic contactless calibration of gauge blocks designed at ISI ASCR. The system combines low-coherence interferometry and laser interferometry, where the first identifies the gauge block sides position and the second one measures the gauge block length itself. A crucial part of the system is the algorithm for gauge block alignment to the measuring beam which is able to compensate the gauge block lateral and longitudinal tilt up to 0.141 mrad. The algorithm is also important for the gauge block position monitoring during its length measurement.

Active Angular Alignment of Gauge Blocks in Double-Ended Interferometers

PubMed Central

Buchta, Zdeněk; Řeřucha, Šimon; Hucl, Václav; Čížek, Martin; Šarbort, Martin; Lazar, Josef; Číp, Ondřej

2013-01-01

This paper presents a method implemented in a system for automatic contactless calibration of gauge blocks designed at ISI ASCR. The system combines low-coherence interferometry and laser interferometry, where the first identifies the gauge block sides position and the second one measures the gauge block length itself. A crucial part of the system is the algorithm for gauge block alignment to the measuring beam which is able to compensate the gauge block lateral and longitudinal tilt up to 0.141 mrad. The algorithm is also important for the gauge block position monitoring during its length measurement. PMID:24084107

Ceramic tip cast in valve rocker arm

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tashiro, K.

1986-12-09

This patent describes a cast ceramic tip for a rocker arm of an automotive engine, a slipper block having a contoured cam engaging surface extending longitudinally of one face thereof, and having a retainer block formed integrally with the slipper block and extending substantially perpendicular to an opposite face of the slipper block. The retainer block has opposite longitudinally extending faces and opposite laterally extending faces. The improvement described here comprises: radiused fillets extending laterally of the opposite faces of the slipper block, and providing transitions between the opposite face thereof and the opposite laterally extending faces of the retainermore » block; and, retaining channels formed exclusively in the longitudinally extending faces of the retainer block, the laterally extending faces being substantially planar.« less

Block LU factorization

NASA Technical Reports Server (NTRS)

Demmel, James W.; Higham, Nicholas J.; Schreiber, Robert S.

1992-01-01

Many of the currently popular 'block algorithms' are scalar algorithms in which the operations have been grouped and reordered into matrix operations. One genuine block algorithm in practical use is block LU factorization, and this has recently been shown by Demmel and Higham to be unstable in general. It is shown here that block LU factorization is stable if A is block diagonally dominant by columns. Moreover, for a general matrix the level of instability in block LU factorization can be founded in terms of the condition number kappa(A) and the growth factor for Gaussian elimination without pivoting. A consequence is that block LU factorization is stable for a matrix A that is symmetric positive definite or point diagonally dominant by rows or columns as long as A is well-conditioned.

Engineering aqueous fiber assembly into silk-elastin-like protein polymers.

PubMed

Zeng, Like; Jiang, Linan; Teng, Weibing; Cappello, Joseph; Zohar, Yitshak; Wu, Xiaoyi

2014-07-01

Self-assembled peptide/protein nanofibers are valuable 1D building blocks for creating complex structures with designed properties and functions. It is reported that the self-assembly of silk-elastin-like protein polymers into nanofibers or globular aggregates in aqueous solutions can be modulated by tuning the temperature of the protein solutions, the size of the silk blocks, and the charge of the elastin blocks. A core-sheath model is proposed for nanofiber formation, with the silk blocks in the cores and the hydrated elastin blocks in the sheaths. The folding of the silk blocks into stable cores--affected by the size of the silk blocks and the charge of the elastin blocks--plays a critical role in the assembly of silk-elastin nanofibers. Furthermore, enhanced hydrophobic interactions between the elastin blocks at elevated temperatures greatly influence the nanoscale features of silk-elastin nanofibers. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Zero-block mode decision algorithm for H.264/AVC.

PubMed

Lee, Yu-Ming; Lin, Yinyi

2009-03-01

In the previous paper , we proposed a zero-block intermode decision algorithm for H.264 video coding based upon the number of zero-blocks of 4 x 4 DCT coefficients between the current macroblock and the co-located macroblock. The proposed algorithm can achieve significant improvement in computation, but the computation performance is limited for high bit-rate coding. To improve computation efficiency, in this paper, we suggest an enhanced zero-block decision algorithm, which uses an early zero-block detection method to compute the number of zero-blocks instead of direct DCT and quantization (DCT/Q) calculation and incorporates two adequate decision methods into semi-stationary and nonstationary regions of a video sequence. In addition, the zero-block decision algorithm is also applied to the intramode prediction in the P frame. The enhanced zero-block decision algorithm brings out a reduction of average 27% of total encoding time compared to the zero-block decision algorithm.

Microbial Communities in Long-Term, Water-Flooded Petroleum Reservoirs with Different in situ Temperatures in the Huabei Oilfield, China

PubMed Central

Tang, Yue-Qin; Li, Yan; Zhao, Jie-Yu; Chi, Chang-Qiao; Huang, Li-Xin; Dong, Han-Ping; Wu, Xiao-Lei

2012-01-01

The distribution of microbial communities in the Menggulin (MGL) and Ba19 blocks in the Huabei Oilfield, China, were studied based on 16S rRNA gene analysis. The dominant microbes showed obvious block-specific characteristics, and the two blocks had substantially different bacterial and archaeal communities. In the moderate-temperature MGL block, the bacteria were mainly Epsilonproteobacteria and Alphaproteobacteria, and the archaea were methanogens belonging to Methanolinea, Methanothermobacter, Methanosaeta, and Methanocella. However, in the high-temperature Ba19 block, the predominant bacteria were Gammaproteobacteria, and the predominant archaea were Methanothermobacter and Methanosaeta. In spite of shared taxa in the blocks, differences among wells in the same block were obvious, especially for bacterial communities in the MGL block. Compared to the bacterial communities, the archaeal communities were much more conserved within blocks and were not affected by the variation in the bacterial communities. PMID:22432032

From global to heavy-light: 5-point conformal blocks

NASA Astrophysics Data System (ADS)

Alkalaev, Konstantin; Belavin, Vladimir

2016-03-01

We consider Virasoro conformal blocks in the large central charge limit. There are different regimes depending on the behavior of the conformal dimensions. The most simple regime is reduced to the global sl(2,C) conformal blocks while the most complicated one is known as the classical conformal blocks. Recently, Fitzpatrick, Kaplan, and Walters showed that the two regimes are related through the intermediate stage of the so-called heavy-light semiclassical limit. We study this idea in the particular case of the 5-point conformal block. To find the 5-point global block we use the projector technique and the Casimir operator approach. Furthermore, we discuss the relation between the global and the heavy-light limits and construct the heavy-light block from the global block. In this way we reproduce our previous results for the 5-point perturbative classical block obtained by means of the monodromy method.

Comparing the effects of single shot sciatic nerve block versus posterior capsule local anesthetic infiltration on analgesia and functional outcome after total knee arthroplasty: a prospective, randomized, double-blinded, controlled trial.

PubMed

Safa, Ben; Gollish, Jeffrey; Haslam, Lynn; McCartney, Colin J L

2014-06-01

Peripheral nerve blocks appear to provide effective analgesia for patients undergoing total knee arthroplasty. Although the literature supports the use of femoral nerve block, addition of sciatic nerve block is controversial. In this study we investigated the value of sciatic nerve block and an alternative technique of posterior capsule local anesthetic infiltration analgesia. 100 patients were prospectively randomized into three groups. Group 1: sciatic nerve block; Group 2: posterior local anesthetic infiltration; Group 3: control. All patients received a femoral nerve block and spinal anesthesia. There were no differences in pain scores between groups. Sciatic nerve block provided a brief clinically insignificant opioid sparing effect. We conclude that sciatic nerve block and posterior local anesthetic infiltration do not provide significant analgesic benefits. Copyright © 2014 Elsevier Inc. All rights reserved.

Method for solidification of radioactive and other hazardous waste

DOEpatents

Anshits, Alexander G.; Vereshchagina, Tatiana A.; Voskresenskaya, Elena N.; Kostin, Eduard M.; Pavlov, Vyacheslav F.; Revenko, Yurii A.; Tretyakov, Alexander A.; Sharonova, Olga M.; Aloy, Albert S.; Sapozhnikova, Natalia V.; Knecht, Dieter A.; Tranter, Troy J.; Macheret, Yevgeny

2002-01-01

Solidification of liquid radioactive waste, and other hazardous wastes, is accomplished by the method of the invention by incorporating the waste into a porous glass crystalline molded block. The porous block is first loaded with the liquid waste and then dehydrated and exposed to thermal treatment at 50-1,000.degree. C. The porous glass crystalline molded block consists of glass crystalline hollow microspheres separated from fly ash (cenospheres), resulting from incineration of fossil plant coals. In a preferred embodiment, the porous glass crystalline blocks are formed from perforated cenospheres of grain size -400+50, wherein the selected cenospheres are consolidated into the porous molded block with a binder, such as liquid silicate glass. The porous blocks are then subjected to repeated cycles of saturating with liquid waste, and drying, and after the last cycle the blocks are subjected to calcination to transform the dried salts to more stable oxides. Radioactive liquid waste can be further stabilized in the porous blocks by coating the internal surface of the block with metal oxides prior to adding the liquid waste, and by coating the outside of the block with a low-melting glass or a ceramic after the waste is loaded into the block.

Facile synthesis of main-chain degradable block copolymers for performance enhanced dismantlable adhesion.

PubMed

Sato, Eriko; Hagihara, Takashi; Matsumoto, Akikazu

2012-04-01

Block copolymers consisting of readily degradable polyperoxides and non-degradable vinyl polymers as the block segments were successfully synthesized by reversible chain transfer catalyzed polymerization, which is one of living radical polymerization techniques. The block copolymers showed characteristic morphology and wettability being different from the polymer blends. When block copolymers containing polyperoxide and polymethacrylate blocks were heated below 150 °C, the polyperoxide blocks were completely degraded and the polymethacrylate blocks were recovered without degradation. Block copolymers containing a poly(2-ethylhexyl methacrylate) block were then investigated as a dismantlable adhesion material, which requires adequate bonding strength during use and easy debonding on demand. Among the several block copolymers, the one consisting of poly(2-ethylhexyl methacrylate) and polyperoxide from methyl sorbate (PPMS) (M(n) = 4900) exhibited good performance as a pressure-sensitive adhesive (PSA). After heating the test specimens in a temperature range from 60 to 100 °C, PSA performance, which was evaluated by 180° peel strength and shear holding power measurements, was significantly diminished. Especially, after heating at 100 °C for 1 h, spontaneous debonding of some test specimens was observed because of the evolution of volatile acetaldehyde from PPMS.

Pre-operative brachial plexus block compared with an identical block performed at the end of surgery: a prospective, double-blind, randomised clinical trial.

PubMed

Holmberg, A; Sauter, A R; Klaastad, Ø; Draegni, T; Raeder, J C

2017-08-01

We evaluated whether pre-emptive analgesia with a pre-operative ultrasound-guided infraclavicular brachial plexus block resulted in better postoperative analgesia than an identical block performed postoperatively. Fifty-two patients undergoing fixation of a fractured radius were included. All patients received general anaesthesia with remifentanil and propofol. Patients were randomly allocated into two groups: a pre-operative block or a postoperative block with 0.5 ml.kg -1 ropivacaine 0.75%. After surgery, all patients received regular paracetamol plus opioids for breakthrough pain. Mean (SD) time to first rescue analgesic after emergence from general anaesthesia was 544 (217) min in the pre-operative block group compared with 343 (316) min in the postoperative block group (p = 0.015). Postoperative pain scores were higher and more patients required rescue analgesia during the first 4 h after surgery in the postoperative block group. There were no significant differences in plasma stress mediators between the groups. Analgesic consumption was lower at day seven in the pre-operative block group. Pain was described as very strong at block resolution in 27 (63%) patients and 26 (76%) had episodes of mild pain after 6 months. We conclude that a pre-operative ultrasound-guided infraclavicular brachial plexus block provides longer and better analgesia in the acute postoperative period compared with an identical postoperative block in patients undergoing surgery for fractured radius. © 2017 The Association of Anaesthetists of Great Britain and Ireland.

Which Ultrasound-Guided Sciatic Nerve Block Strategy Works Faster? Prebifurcation or Separate Tibial-Peroneal Nerve Block? A Randomized Clinical Trial.

PubMed

Faiz, Seyed Hamid Reza; Imani, Farnad; Rahimzadeh, Poupak; Alebouyeh, Mahmoud Reza; Entezary, Saeed Reza; Shafeinia, Amineh

2017-08-01

Peripheral nerve block is an accepted method in lower limb surgeries regarding its convenience and good tolerance by the patients. Quick performance and fast sensory and motor block are highly demanded in this method. The aim of the present study was to compare 2 different methods of sciatic and tibial-peroneal nerve block in lower limb surgeries in terms of block onset. In this clinical trial, 52 candidates for elective lower limb surgery were randomly divided into 2 groups: sciatic nerve block before bifurcation (SG; n = 27) and separate tibial-peroneal nerve block (TPG; n = 25) under ultrasound plus nerve stimulator guidance. The mean duration of block performance, as well as complete sensory and motor block, was recorded and compared between the groups. The mean duration of complete sensory block in the SG and TPG groups was 35.4 ± 4.1 and 24.9 ± 4.2 minutes, respectively, which was significantly lower in the TPG group (P = 0.001). The mean duration of complete motor block in the SG and TPG groups was 63.3 ± 4.4 and 48.4 ± 4.6 minutes, respectively, which was significantly lower in the TPG group (P = 0.001). No nerve injuries, paresthesia, or other possible side effects were reported in patients. According to the present study, it seems that TPG shows a faster sensory and motor block than SG.

Transport and Depositional Model for Large Country Rock Blocks Within the Searchlight Pluton, Southern Nevada

NASA Astrophysics Data System (ADS)

Perrault, D. S.; Furbish, D. J.; Miller, C. F.

2006-05-01

Searchlight pluton, a steeply tilted, 10 km thick Miocene intrusion in the Colorado River Extensional Corridor, exposes a zone with abundant, 5-400 m long blocks of Proterozoic gneiss. Blocks are present within a pair of subparallel horizons that make up a 2 km-thick zone and extend about 6 km laterally away from the pluton's north margin slightly oblique to the initially subhorizontal boundary between the pluton's middle unit (granite) and lower unit (qtz monzonite). Blocks are a variety of Precambrian metasedimentary gneisses, granitic gneisses, and mylonites. Blocks are commonly polylithologic and well foliated, with long and intermediate dimensions parallel to both their own foliation and that of the granitic host. Their average aspect ratio is ~ 4:1. Blocks within these horizons are interpreted as stoped (detached country rock that experience gravity- induced displacement) based on several lines of evidence. First, the distribution and abundances of blocks are not consistent with an isolated panel of wall rock (screen). The zone is laterally discontinuous (local abundances vary from ~ 0-40 %); transects a gradational (cm-m scale) internal contact at a slightly oblique angle; and tapers away from the pluton's margin. Second, while block foliations are homoclinal and show fairly consistent attitudes from block to block, block foliations are discordant with wall rock foliations at the same stratigraphic level (adjacent north wall). Third, mush disturbance features such as schlieren and enhanced feldspar foliation beneath blocks suggest a downward compaction. We interpret the blocks to have been emplaced after wall collapse events. We are using scaled settling experiments to clarify how blocks move within viscous fluids and interact with crystal mushes. The experiments, involving tabular ceramic blocks with density ρ = 1.75-2.20 g cm-3 settling in shampoo (ρ = 1.02 g cm-3) with viscosity μ = 20.35 Pa s, are scaled to order-of-magnitude by the particle Reynolds number (Re ~ 10-2) based on a prototype spherical block of diameter ~ 50 m settling through a crystal free magma with the density (~ 2.25 g cm-3) and viscosity (~ 105 Pa s) of a granitic melt. With low Reynolds number settling, tabular blocks starting from arbitrary orientation tend to become aligned with their long dimension vertical. During alignment fluid shear is focused on the trailing part of the downward facing surface of the block, inducing a torque that tends to upright the block. Settling experiments also provide insights regarding how blocks might interact with mush/melt interfaces. Mushes at sufficiently high crystal content (>50%) stiffen rheologically. Stoped blocks settling on these interfaces may impart stresses that result in localized deformation of the mush (forming schlieren and/or compaction features). We moreover suggest that tabular blocks are deposited with their long axes horizontal at these interfaces; blocks with a geometry controlled by internal structures (e.g. foliation) would on average possess a subparallel alignment of both their geometric shape and internal structure. At sufficiently low Re, this realignment of a tabular block begins as it approaches a semi-rigid surface or interface and the leading fluid boundary layer interacts with the interface; the vertical speed of the block decreases and it begins to deflect and take on a lateral motion.

Conduction block of mammalian myelinated nerve by local cooling to 15–30°C after a brief heating

PubMed Central

Zhang, Zhaocun; Lyon, Timothy D.; Kadow, Brian T.; Shen, Bing; Wang, Jicheng; Lee, Andy; Kang, Audry; Roppolo, James R.; de Groat, William C.

2016-01-01

This study aimed at understanding thermal effects on nerve conduction and developing new methods to produce a reversible thermal block of axonal conduction in mammalian myelinated nerves. In 13 cats under α-chloralose anesthesia, conduction block of pudendal nerves (n = 20) by cooling (5–30°C) or heating (42–54°C) a small segment (9 mm) of the nerve was monitored by the urethral striated muscle contractions and increases in intraurethral pressure induced by intermittent (5 s on and 20 s off) electrical stimulation (50 Hz, 0.2 ms) of the nerve. Cold block was observed at 5–15°C while heat block occurred at 50–54°C. A complete cold block up to 10 min was fully reversible, but a complete heat block was only reversible when the heating duration was less than 1.3 ± 0.1 min. A brief (<1 min) reversible complete heat block at 50–54°C or 15 min of nonblock mild heating at 46–48°C significantly increased the cold block temperature to 15–30°C. The effect of heating on cold block fully reversed within ∼40 min. This study discovered a novel method to block mammalian myelinated nerves at 15–30°C, providing the possibility to develop an implantable device to block axonal conduction and treat many chronic disorders. The effect of heating on cold block is of considerable interest because it raises many basic scientific questions that may help reveal the mechanisms underlying cold or heat block of axonal conduction. PMID:26740534

A Randomized Controlled Trial Examining the Effect of the Addition of the Mandibular Block to Cervical Plexus Block for Carotid Endarterectomy.

PubMed

Kavrut Ozturk, Nilgun; Kavakli, Ali Sait; Sagdic, Kadir; Inanoglu, Kerem; Umot Ayoglu, Raif

2018-04-01

Although the cervical plexus block generally provides adequate analgesia for carotid endarterectomy, pain caused by metal retractors on the inferior surface of the mandible is not prevented by the cervical block. Different pain relief methods can be performed for patients who experience discomfort in these areas. In this study, the authors evaluated the effect of mandibular block in addition to cervical plexus block on pain scores in carotid endarterectomy. A prospective, randomized, controlled trial. Training and research hospital. Patients who underwent a carotid endarterectomy. Patients scheduled for carotid endarterectomy under cervical plexus block were randomized into 2 groups: group 1 (those who did not receive a mandibular block) and group 2 (those who received a mandibular block). The main purpose of the study was to evaluate the mandibular block in addition to cervical plexus block in terms of intraoperative pain scores. Intraoperative visual analog scale scores were significantly higher in group 1 (p = 0.001). The amounts of supplemental 1% lidocaine and intraoperative intravenous analgesic used were significantly higher in group 1 (p = 0.001 and p = 0.035, respectively). Patient satisfaction scores were significantly lower in group 1 (p = 0.044). The amount of postoperative analgesic used, time to first analgesic requirement, postoperative visual analog scale scores, and surgeon satisfaction scores were similar in both groups. There was no significant difference between the groups with respect to complications. No major neurologic deficits or perioperative mortality were observed. Mandibular block in addition to cervical plexus block provides better intraoperative pain control and greater patient satisfaction than cervical plexus block alone. Copyright © 2017 Elsevier Inc. All rights reserved.

Predicting successful supraclavicular brachial plexus block using pulse oximeter perfusion index.

PubMed

Abdelnasser, A; Abdelhamid, B; Elsonbaty, A; Hasanin, A; Rady, A

2017-08-01

Supraclavicular nerve block is a popular approach for anaesthesia for upper limb surgeries. Conventional methods for evaluation of block success are time consuming and need patient cooperation. The aim of this study was to evaluate whether the perfusion index (PI) can be used to predict and provide a cut-off value for ultrasound-guided supraclavicular nerve block success. The study included 77 patients undergoing elective orthopaedic procedures under ultrasound-guided supraclavicular nerve block. After local anaesthetic injection, sensory block success was assessed every 3 min by pinprick, and motor block success was assessed every 5 min by the ability to flex the elbow and the hand against resistance. The PI was recorded at baseline and at 10, 20, and 30 min after anaesthetic injection in both blocked and non-blocked limbs. The PI ratio was calculated as the PI after 10 min divided by the PI at the baseline. Receiver operating characteristic curves were constructed for the accuracy of the PI in detection of block success. The PI was higher in the blocked limb at all time points, and this was paralleled by a higher PI ratio compared with the unblocked limb. Both the PI and the PI ratio at 10 min after injection showed a sensitivity and specificity of 100% for block success at cut-off values of 3.3 and 1.4, respectively. The PI is a useful tool for evaluation of successful supraclavicular nerve block. A PI ratio of > 1.4 is a good predictor for block success. © The Author 2017. Published by Oxford University Press on behalf of the British Journal of Anaesthesia. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Evaluating atmospheric blocking in the global climate model EC-Earth

NASA Astrophysics Data System (ADS)

Hartung, Kerstin; Hense, Andreas; Kjellström, Erik

2013-04-01

Atmospheric blocking is a phenomenon of the midlatitudal troposphere, which plays an important role in climate variability. Therefore a correct representation of blocking in climate models is necessary, especially for evaluating the results of climate projections. In my master's thesis a validation of blocking in the coupled climate model EC-Earth is performed. Blocking events are detected based on the Tibaldi-Molteni Index. At first, a comparison with the reanalysis dataset ERA-Interim is conducted. The blocking frequency depending on longitude shows a small general underestimation of blocking in the model - a well known problem. Scaife et al. (2011) proposed the correction of model bias as a way to solve this problem. However, applying the correction to the higher resolution EC-Earth model does not yield any improvement. Composite maps show a link between blocking events and surface variables. One example is the formation of a positive surface temperature anomaly north and a negative anomaly south of the blocking anticyclone. In winter the surface temperature in EC-Earth can be reproduced quite well, but in summer a cold bias over the inner-European ocean is present. Using generalized linear models (GLMs) I want to study the connection between regional blocking and global atmospheric variables further. GLMs have the advantage of being applicable to non-Gaussian variables. Therefore the blocking index at each longitude, which is Bernoulli distributed, can be analysed statistically with GLMs. I applied a logistic regression between the blocking index and the geopotential height at 500 hPa to study the teleconnection of blocking events at midlatitudes with global geopotential height. GLMs also offer the possibility of quantifying the connections shown in composite maps. The implementation of the logistic regression can even be expanded to a search for trends in blocking frequency, for example in the scenario simulations.

Nonalcoholic fatty liver disease is associated with an increased risk of heart block in hospitalized patients with type 2 diabetes mellitus.

PubMed

Mantovani, Alessandro; Rigolon, Riccardo; Pichiri, Isabella; Bonapace, Stefano; Morani, Giovanni; Zoppini, Giacomo; Bonora, Enzo; Targher, Giovanni

2017-01-01

Recent studies suggested that nonalcoholic fatty liver disease (NAFLD) is associated with an increased risk of cardiac tachyarrhythmias (mainly atrial fibrillation) in patients with and without type 2 diabetes mellitus. The aim of this study was to examine whether an association also exists between NAFLD and heart block. We have retrospectively evaluated a hospital-based cohort of 751 patients with type 2 diabetes discharged from our Division of Diabetes and Endocrinology during years 2007-2014. Standard electrocardiograms were performed on all patients. Diagnosis of NAFLD was based on ultrasonography, whereas the severity of advanced hepatic fibrosis was based on the fibrosis (FIB)-4 score and other non-invasive fibrosis markers. Overall, 524 (69.8%) patients had NAFLD and 202 (26.9%) had heart block (defined as at least one block among first-degree atrio-ventricular block, second-degree block, third-degree block, left bundle branch block, right bundle branch block, left anterior hemi-block or left posterior hemi-block) on electrocardiograms. Patients with NAFLD had a remarkably higher prevalence of any persistent heart block than those without NAFLD (31.3% vs. 16.7%, p<0.001); this prevalence was particularly increased among those with higher FIB-4 score. NAFLD was associated with a threefold increased risk of prevalent heart block (adjusted-odds ratio 3.04, 95% CI 1.81-5.10), independently of age, sex, hypertension, prior ischemic heart disease, hemoglobin A1c, microvascular complication status, use of medications and other potentially confounding factors. In conclusion, this is the largest cross-sectional study to show that NAFLD and its severity are independently associated with an increased risk of prevalent heart block in hospitalized patients with type 2 diabetes.

Molecular origin of photovoltaic performance in donor- block-acceptor all-conjugated block copolymers

DOE PAGES

Smith, Kendall A.; Lin, Yen -Hao; Mok, Jorge W.; ...

2015-11-03

All-conjugated block copolymers may be an effective route to self-assembled photovoltaic devices, but we lack basic information on the relationship between molecular characteristics and photovoltaic performance. Here, we synthesize a library of poly(3-hexylthiophene) (P3HT) block poly((9,9-dialkylfluorene)-2,7-diyl-alt-[4,7-bis(alkylthiophen-5-yl)-2,1,3-benzothiadiazole]-2',2''-diyl) (PFTBT) donor- block-acceptor all-conjugated block copolymers and carry out a comprehensive study of processing conditions, crystallinity, domain sizes, and side-chain structure on photovoltaic device performance. We find that all block copolymers studied exhibit an out-of-plane crystal orientation after deposition, and on thermal annealing at high temperatures the crystal orientation flips to an in-plane orientation. By varying processing conditions on polymer photovoltaic devices, we showmore » that the crystal orientation has only a modest effect (15-20%) on photovoltaic performance. The addition of side-chains to the PFTBT block is found to decrease photovoltaic power conversion efficiencies by at least an order of magnitude. Through grazing-incidence X-ray measurements we find that the addition of side-chains to the PFTBT acceptor block results in weak segregation and small (< 10 nm) block copolymer self-assembled donor and acceptor domains. This work is the most comprehensive to date on all-conjugated block copolymer systems and suggests that photovoltaic performance of block copolymers depends strongly on the miscibility of donor and acceptor blocks, which impacts donor and acceptor domain sizes and purity. Lastly, strategies for improving the device performance of block copolymer photovoltaics should seek to increase segregation between donor and acceptor polymer domains.« less

Sandblasting may damage the surface of composite CAD-CAM blocks.

PubMed

Yoshihara, Kumiko; Nagaoka, Noriyuki; Maruo, Yukinori; Nishigawa, Goro; Irie, Masao; Yoshida, Yasuhiro; Van Meerbeek, Bart

2017-03-01

CAD-CAM blocks to fabricate semi-direct and indirect restorations are available in different sorts of ceramics as well as composite. In order to bond restorations prepared out of composite blocks into tooth cavities, it is recommended to gently sandblast the surface prior to the application of a primer/adhesive. Today, the effect of sandblasting composite block surfaces has not thoroughly been investigated. In this study, the ultra-structure of composite CAD-CAM blocks was investigated with special attention to the effect of sandblasting on the surface topography and of silanization on the bonding performance. Five different composite CAD-CAM blocks were involved. We correlatively investigated their structural and chemical composition using X-ray diffraction (XRD), energy dispersion spectroscopy (EDS), scanning electron microscopy (SEM) and (scanning) transmission electron microscopy ((S)TEM). The effect of sandblasting was also imaged in cross-section and at the interface with composite cement. Finally, we measured the shear bond strength to the sandblasted block surface with and without silanization. All composite blocks revealed a different ultra-structure. Sandblasting increased surface roughness and resulted in an irregular surface with some filler exposure. Sandblasting also damaged the surface. When the sandblasted composite blocks were silanized, superior bonding receptiveness in terms of higher bond strength was achieved except for Shofu Block HC. Sandblasting followed by silanization improved the bond strength to composite CAD-CAM blocks. However, sandblasting may also damage the composite CAD-CAM block surface. For the composite CAD-CAM block Shofu Block HC, the damage was so severe that silanization did not improve bond strength. Copyright © 2016 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Too Deep or Not Too Deep?: A Propensity-Matched Comparison of the Analgesic Effects of a Superficial Versus Deep Serratus Fascial Plane Block for Ambulatory Breast Cancer Surgery.

PubMed

Abdallah, Faraj W; Cil, Tulin; MacLean, David; Madjdpour, Caveh; Escallon, Jaime; Semple, John; Brull, Richard

2018-07-01

Serratus fascial plane block can reduce pain following breast surgery, but the question of whether to inject the local anesthetic superficial or deep to the serratus muscle has not been answered. This cohort study compares the analgesic benefits of superficial versus deep serratus plane blocks in ambulatory breast cancer surgery patients at Women's College Hospital between February 2014 and December 2016. We tested the joint hypothesis that deep serratus block is noninferior to superficial serratus block for postoperative in-hospital (pre-discharge) opioid consumption and pain severity. One hundred sixty-six patients were propensity matched among 2 groups (83/group): superficial and deep serratus blocks. The cohort was used to evaluate the effect of blocks on postoperative oral morphine equivalent consumption and area under the curve for rest pain scores. We considered deep serratus block to be noninferior to superficial serratus block if it were noninferior for both outcomes, within 15 mg morphine and 4 cm·h units margins. Other outcomes included intraoperative fentanyl requirements, time to first analgesic request, recovery room stay, and incidence of postoperative nausea and vomiting. Deep serratus block was associated with postoperative morphine consumption and pain scores area under the curve that were noninferior to those of the superficial serratus block. Intraoperative fentanyl requirements, time to first analgesic request, recovery room stay, and postoperative nausea and vomiting were not different between blocks. The postoperative in-hospital analgesia associated with deep serratus block is as effective (within an acceptable margin) as superficial serratus block following ambulatory breast cancer surgery. These new findings are important to inform both current clinical practices and future prospective studies.

Can You Party Your Way to Better Health? A Propensity Score Analysis of Block Parties and Health

PubMed Central

Dean, Lorraine T.; Hillier, Amy; Chau-Glendinning, Hang; Subramanian, SV; Williams, David R.; Kawachi, Ichiro

2015-01-01

While other indicators of social capital have been linked to health, the role of block parties on health in Black neighborhoods and on Black residents is understudied. Block parties exhibit several features of bonding social capital and are present in nearly 90% of Philadelphia’s predominantly Black neighborhoods. This analysis investigated: (1) whether or not block parties are an indicator of bonding social capital in Black neighborhoods; (2) the degree to which block parties might be related to self-rated health in the ways that other bonding social indicators are related to health; and (3) whether or not block parties are associated with average self-rated health for Black residents particularly. Using census tract-level indicators of bonding social capital and records of block parties from 2003 to 2008 for 381 Philadelphia neighborhoods (defined by census tracts), an ecological-level propensity score was generated to assess the propensity for a block party, adjusting for population demographics, neighborhood characteristics, neighborhood resources and violent crime. Results indicate that in multivariable regression, block parties were associated with increased bonding social capital in Black neighborhoods; however, the calculation of the average effect of the treatment on the treated (ATT) within each propensity score strata showed no effect of block parties on average self-rated health for Black residents. Block parties may be an indicator of bonding social capital in Philadelphia’s predominantly Black neighborhoods, but this analysis did not show a direct association between block parties and self-rated health for Black residents. Further research should consider what other health outcomes or behaviors block parties may be related to and how interventionists can leverage block parties for health promotion. PMID:26117555

Molecular origin of photovoltaic performance in donor- block-acceptor all-conjugated block copolymers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Kendall A.; Lin, Yen -Hao; Mok, Jorge W.

All-conjugated block copolymers may be an effective route to self-assembled photovoltaic devices, but we lack basic information on the relationship between molecular characteristics and photovoltaic performance. Here, we synthesize a library of poly(3-hexylthiophene) (P3HT) block poly((9,9-dialkylfluorene)-2,7-diyl-alt-[4,7-bis(alkylthiophen-5-yl)-2,1,3-benzothiadiazole]-2',2''-diyl) (PFTBT) donor- block-acceptor all-conjugated block copolymers and carry out a comprehensive study of processing conditions, crystallinity, domain sizes, and side-chain structure on photovoltaic device performance. We find that all block copolymers studied exhibit an out-of-plane crystal orientation after deposition, and on thermal annealing at high temperatures the crystal orientation flips to an in-plane orientation. By varying processing conditions on polymer photovoltaic devices, we showmore » that the crystal orientation has only a modest effect (15-20%) on photovoltaic performance. The addition of side-chains to the PFTBT block is found to decrease photovoltaic power conversion efficiencies by at least an order of magnitude. Through grazing-incidence X-ray measurements we find that the addition of side-chains to the PFTBT acceptor block results in weak segregation and small (< 10 nm) block copolymer self-assembled donor and acceptor domains. This work is the most comprehensive to date on all-conjugated block copolymer systems and suggests that photovoltaic performance of block copolymers depends strongly on the miscibility of donor and acceptor blocks, which impacts donor and acceptor domain sizes and purity. Lastly, strategies for improving the device performance of block copolymer photovoltaics should seek to increase segregation between donor and acceptor polymer domains.« less

Ultrasound-guided Combined Fascial Plane Blocks as an Intervention for Pain Management after Laparoscopic Cholecystectomy: A Randomized Control Study

PubMed Central

Ramkiran, Seshadri; Jacob, Mathews; Honwad, Manish; Vivekanand, Desiraju; Krishnakumar, Mathangi; Patrikar, Seema

2018-01-01

Background: Pain associated with laparoscopic cholecystectomy is most severe during the first 24 h and the port sites are the most painful. Recent multimodal approaches target incisional pain instead of visceral pain which has led to the emergence of abdominal fascial plane blocks. This study embraces a novel combination of two independently effective fascial plane blocks, namely rectus sheath block and subcostal transversus abdominis plane (TAP) block to alleviate postoperative pain. Study Objective: The aim is to evaluate the effectiveness of the combination of rectus sheath block and subcostal TAP block, to compare its efficacy with that of subcostal TAP block alone and with conventional port site infiltration (PSI) in alleviating postoperative pain in patients undergoing laparoscopic cholecystectomy. Methodology: This prospective, randomized control, pilot study included 61 patients scheduled for elective laparoscopic cholecystectomy and distributed among three groups, namely Group 1: Combined subcostal TAP block with rectus sheath block (n = 20); Group 2: Oblique subcostal TAP block alone (n = 21); and Group 3: PSI group as an active control (n = 20). Results: Combined group had significantly lower pain scores, higher satisfaction scores, and reduced rescue analgesia both in early and late postoperative periods than the conventional PSI group. Conclusion: Ultrasound-guided combined fascial plane blocks is a novel intervention in pain management of patients undergoing laparoscopic cholecystectomy and should become the standard of care. PMID:29628547

21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Polyoxyethylene (23) lauryl ether blocks. 520.1846... Polyoxyethylene (23) lauryl ether blocks. (a) Specifications. Each molasses-based block contains 2.2 percent... (1 pound of block per 500 kilogram (1,100 pound) animal per day). (2) Indications for use. For...

Olfactory Blocking and Odorant Similarity in the Honeybee

ERIC Educational Resources Information Center

Gerber, Bertram; Giurfa, Martin; Guerrieri, Fernando; Lachnit, Harald

2005-01-01

Blocking occurs when previous training with a stimulus A reduces (blocks) subsequent learning about a stimulus B, when A and B are trained in compound. The question of whether blocking exists in olfactory conditioning of proboscis extension reflex (PER) in honeybees is under debate. The last published accounts on blocking in honeybees state that…

Young Children's Block Construction Activities: Findings from 3 Years of Observation.

ERIC Educational Resources Information Center

Hanline, Mary Frances; Milton, Sande; Phelps, Pamela

2001-01-01

A 3-year study explored the development of the complexity of block constructions of 65 preschool children. Results indicated that the complexity of block constructions increased with age, the time the child was involved with block construction activities had a positive effect on complexity, and gender did not influence block construction…

Block Transfer Handbook: Constructing and Negotiating Block Transfer Agreements.

ERIC Educational Resources Information Center

Finlay, Finola

The purpose of this handbook is to provide resources for institutions or articulation committees who are engaged in the task of investigating the feasibility of block transfer agreements. Block transfer is the process whereby a block of credits is granted to students who have successfully completed a certificate, diploma, or cluster of courses…

Thinking Outside the Block: An Innovative Alternative to 4X4 Block Scheduling.

ERIC Educational Resources Information Center

Frank, Myra

2002-01-01

Introduces a 4x1 block scheduling method that was developed as an alternative to 4x4 block scheduling. Schedules Fridays for summer school, test preparation, and enrichment and elective courses. Includes suggestions on how to alleviate drawbacks of the 4x1 block schedule. (YDS)

Multi-shape memory polymers achieved by the spatio-assembly of 3D printable thermoplastic building blocks.

PubMed

Li, Hongze; Gao, Xiang; Luo, Yingwu

2016-04-07

Multi-shape memory polymers were prepared by the macroscale spatio-assembly of building blocks in this work. The building blocks were methyl acrylate-co-styrene (MA-co-St) copolymers, which have the St-block-(St-random-MA)-block-St tri-block chain sequence. This design ensures that their transition temperatures can be adjusted over a wide range by varying the composition of the middle block. The two St blocks at the chain ends can generate a crosslink network in the final device to achieve strong bonding force between building blocks and the shape memory capacity. Due to their thermoplastic properties, 3D printing was employed for the spatio-assembly to build devices. This method is capable of introducing many transition phases into one device and preparing complicated shapes via 3D printing. The device can perform a complex action via a series of shape changes. Besides, this method can avoid the difficult programing of a series of temporary shapes. The control of intermediate temporary shapes was realized via programing the shapes and locations of building blocks in the final device.

Two cell cycle blocks caused by iron chelation of neuroblastoma cells: separating cell cycle events associated with each block.

PubMed

Siriwardana, Gamini; Seligman, Paul A

2013-12-01

Studies have presented evidence that besides the well described S phase block, treatment of cancer cell lines with the iron chelator deferrioxamine (DFO) also results in an earlier block in G1 phase. In this article, measurements of cell cycle regulatory proteins define this block at a very specific point in G1. DFO treatment results in markedly decreased cyclin A protein levels. Cyclin E levels that accumulate in early to mid-G1 are increased in cells treated with DFO as compared to the resting cells. The DFO S phase block is shown after cells are arrested at G1/S by (aphidicolin) then released into DFO. The same S phase block occurs with DFO treatment of a neuroblastoma cell line relatively resistant to the G1 DFO block. These experiments clearly differentiate the S phase DFO block from the earlier block pinpointed to a point in mid-G1, before G1/S when cyclin E protein increases but before increased cyclin A synthesis. Apoptosis was observed in cells inhibited by DFO at both cell cycle arrest points.

Fabrication of Carbonate Apatite Block through a Dissolution-Precipitation Reaction Using Calcium Hydrogen Phosphate Dihydrate Block as a Precursor.

PubMed

Tsuru, Kanji; Yoshimoto, Ayami; Kanazawa, Masayuki; Sugiura, Yuki; Nakashima, Yasuharu; Ishikawa, Kunio

2017-03-31

Carbonate apatite (CO₃Ap) block, which is a bone replacement used to repair defects, was fabricated through a dissolution-precipitation reaction using a calcium hydrogen phosphate dihydrate (DCPD) block as a precursor. When the DCPD block was immersed in NaHCO₃ or Na₂CO₃ solution at 80 °C, DCPD converted to CO₃Ap within 3 days. β-Tricalcium phosphate was formed as an intermediate phase, and it was completely converted to CO₃Ap within 2 weeks when the DCPD block was immersed in Na₂CO₃ solution. Although the crystal structures of the DCPD and CO₃Ap blocks were different, the macroscopic structure was maintained during the compositional transformation through the dissolution-precipitation reaction. CO₃Ap block fabricated in NaHCO₃ or Na₂CO₃ solution contained 12.9 and 15.8 wt % carbonate, respectively. The diametral tensile strength of the CO₃Ap block was 2 MPa, and the porosity was approximately 57% regardless of the carbonate solution. DCPD is a useful precursor for the fabrication of CO₃Ap block.

Epidural block

MedlinePlus

... body. This lessens the pain of contractions during childbirth. An epidural block may also be used to ... extremities. This article focuses on epidural blocks during childbirth. How is the Epidural Given? The block or ...

Amphiphilic block copolymer membrane for vanadium redox flow battery

NASA Astrophysics Data System (ADS)

Wang, Fei; Sylvia, James M.; Jacob, Monsy M.; Peramunage, Dharmasena

2013-11-01

An amphiphilic block copolymer comprised of hydrophobic polyaryletherketone (PAEK) and hydrophilic sulfonated polyaryletherketone (SPAEK) blocks has been synthesized and characterized. A membrane prepared from the block copolymer is used as the separator in a single cell vanadium redox flow battery (VRB). The proton conductivity, mechanical property, VO2+ permeability and single VRB cell performance of this block copolymer membrane are investigated and compared to Nafion™ 117. The block copolymer membrane showed significantly improved vanadium ion selectivity, higher mechanical strength and lower conductivity than Nafion™ 117. The VRB containing the block copolymer membrane exhibits higher coulombic efficiency and similar energy efficiency compared to a VRB using Nafion™ 117. The better vanadium ion selectivity of the block copolymer membrane has led to a much smaller capacity loss during 50 charge-discharge cycles for the VRB.

The impact of temperature loading on massive concrete block resistance

NASA Astrophysics Data System (ADS)

Beran, Pavel; Kočí, Jan

2017-07-01

Very large and massive concrete blocks with thickness in interval 3.5 - 6 meters are often designed in cement industry. These massive blocks have high heat inertial and thus the thermal stress due to nonlinear temperature gradient in concrete block may occur. The coupled thermo-mechanical analysis of concrete block in Prague Czech Republic and Sterlitamak Russia was made. By the numerical model of concrete block was analyzed the typical year (called reference year) in particular localities. The results show that in concrete block the thermal stresses which are higher than the tensile strength of concrete originate. Therefore, the concrete block should be reinforced by steel rods. The values of stresses are markedly affected by climate. The significantly higher values of thermal stresses were detected in Sterlitamak than in Prague.

Ballistic Blocks Surrounding Kilauea's Caldera

NASA Astrophysics Data System (ADS)

Swanson, D.; Zolkos, S.; Haravitch, B.

2010-12-01

Thousands of lithic blocks dot the surface around Kilauea’s caldera, erupted ballistically at the end of the 1790 eruption or soon thereafter. Most of the blocks occur in the western and southern sectors, probably reflecting the proximity of vents on the caldera floor. We mapped the ejecta field, measuring most of the blocks with nominal diameters ((a+b+c)/3) more than 75 cm and many of the smaller ones, noting distinctive lithologies. The distributions, sizes, and lithologies suggest 7-8 different ballistic bursts from 3-4 generalized vent areas. We measured 15 blocks with nominal diameters (ND) of 150-201 cm, 169 blocks with ND 100-149 cm, 308 blocks with ND 75-99 cm, 684 blocks with ND 50-74 cm, and 545 blocks with ND 25-49 cm. The smaller blocks were measured only in outlying areas, where they were the largest in the neighborhood, but they occur throughout the field. Twelve blocks with ND >150 cm lie within 1.7 km west and south of the center of Halema`uma`u; a vent near this location likely erupted the blocks. Three of the largest blocks, however, are 2.2-2.7 km north of Halema`uma`u and probably came from a more northerly vent. This interpretation is supported by the distributions of all blocks with ND >100 cm, which define at least 4, and possibly 5, different dispersal lobes; three cluster near Halema`uma`u, one is slightly north, and the one with the three large blocks is still farther north. The blocks have typical lithologies for Kilauea’s summit, including coarse basalt or fine gabbro derived from the centers of thick flows, solidified lakes, or small intrusions. Three lithologies are distinctive and help define 3, possibly 4, discrete bursts. Blocks of fine-grained basalt riddled with segregation veins occur only in a lobe 1.3 km wide reaching as far as 1.8 km southwest of Halema`uma`u; this lobe overlaps slightly with one defined by block size but is mostly distinct and probably indicates a separate burst. A cluster of blocks with puffy, somewhat fluidal rinds forms a distinct lobe 800 m wide out to 1.8 km southeast of Halema`uma`u. The cluster also contains many cored bombs and a few juvenile bombs and lapilli without cores. This is the only ballistic lobe that contains much juvenile material, though older fall and surge deposits of 1790 and pre1790 vintage also carry cored bombs and juvenile lapilli. This lobe is coextensive with one defined by block size. The largest ballistic lobe has abundant, commonly oxidized blocks of olivine-rich basalt, some verging on picrite. The main lobe, about 900 m wide, extends 0.9-3.6 km southeast of Halema`uma`u; three olivine-rich blocks between 100 and 150 cm ND occur 2.4 to 3.3 km out. A possible second lobe of olivine-rich blocks occurs out to 1.6 km due south of Halema`uma`u. The lobes indicate a directionality and inclined ejection angle for at least some of the ballistic eruptions, as was true for the observed, but much smaller, ballistic eruptions in 1924. The scarcity of juvenile ejecta argues for phreatic eruptions that were likely initiated at or below the water table, today about 600 m below the caldera rim. If so, some ballistic blocks weighing a few tonnes were thrown at least 600 m above the vent. The dynamics of these explosive eruptions are under study.

A Retrospective Study Evaluating the Effect of Low Doses of Perineural Dexamethasone on Ropivacaine Brachial Plexus Peripheral Nerve Block Analgesic Duration.

PubMed

Schnepper, Gregory D; Kightlinger, Benjamin I; Jiang, Yunyun; Wolf, Bethany J; Bolin, Eric D; Wilson, Sylvia H

2017-09-23

Examination of the effectiveness of perineural dexamethasone administered in very low and low doses on ropivacaine brachial plexus block duration. Retrospective evaluation of brachial plexus block duration in a large cohort of patients receiving peripheral nerve blocks with and without perineural dexamethasone in a prospectively collected quality assurance database. A single academic medical center. A total of 1,942 brachial plexus blocks placed over a 16-month period were reviewed. Demographics, nerve block location, and perineural dexamethasone utilization and dose were examined in relation to block duration. Perineural dexamethasone was examined as none (0 mg), very low dose (2 mg or less), and low dose (greater than 2 mg to 4 mg). Continuous catheter techniques, local anesthetics other than ropivacaine, and block locations with fewer than 15 subjects were excluded. Associations between block duration and predictors of interest were examined using multivariable regression models. A subgroup analysis of the impact of receiving dexamethasone on block duration within each block type was also conducted using a univariate linear regression approach. A total of 1,027 subjects were evaluated. More than 90% of brachial plexus blocks contained perineural dexamethasone (≤4 mg), with a median dose of 2 mg. Increased block duration was associated with receiving any dose of perineural dexamethasone (P < 0.0001), female gender (P = 0.022), increased age (P = 0.048), and increased local anesthetic dose (P = 0.01). In a multivariable model, block duration did not differ with very low- or low-dose perineural dexamethasone after controlling for other factors (P = 0.420). Perineural dexamethasone prolonged block duration compared with ropivacaine alone; however, duration was not greater with low-dose compared with very low-dose perineural dexamethasone. © 2017 American Academy of Pain Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

An outline of graphical Markov models in dentistry.

PubMed

Helfenstein, U; Steiner, M; Menghini, G

1999-12-01

In the usual multiple regression model there is one response variable and one block of several explanatory variables. In contrast, in reality there may be a block of several possibly interacting response variables one would like to explain. In addition, the explanatory variables may split into a sequence of several blocks, each block containing several interacting variables. The variables in the second block are explained by those in the first block; the variables in the third block by those in the first and the second block etc. During recent years methods have been developed allowing analysis of problems where the data set has the above complex structure. The models involved are called graphical models or graphical Markov models. The main result of an analysis is a picture, a conditional independence graph with precise statistical meaning, consisting of circles representing variables and lines or arrows representing significant conditional associations. The absence of a line between two circles signifies that the corresponding two variables are independent conditional on the presence of other variables in the model. An example from epidemiology is presented in order to demonstrate application and use of the models. The data set in the example has a complex structure consisting of successive blocks: the variable in the first block is year of investigation; the variables in the second block are age and gender; the variables in the third block are indices of calculus, gingivitis and mutans streptococci and the final response variables in the fourth block are different indices of caries. Since the statistical methods may not be easily accessible to dentists, this article presents them in an introductory form. Graphical models may be of great value to dentists in allowing analysis and visualisation of complex structured multivariate data sets consisting of a sequence of blocks of interacting variables and, in particular, several possibly interacting responses in the final block.

Energy resolution in semiconductor gamma radiation detectors using heterojunctions and methods of use and preparation thereof

DOEpatents

Nikolic, Rebecca J.; Conway, Adam M.; Nelson, Art J.; Payne, Stephen A.

2012-09-04

In one embodiment, a system comprises a semiconductor gamma detector material and a hole blocking layer adjacent the gamma detector material, the hole blocking layer resisting passage of holes therethrough. In another embodiment, a system comprises a semiconductor gamma detector material, and an electron blocking layer adjacent the gamma detector material, the electron blocking layer resisting passage of electrons therethrough, wherein the electron blocking layer comprises undoped HgCdTe. In another embodiment, a method comprises forming a hole blocking layer adjacent a semiconductor gamma detector material, the hole blocking layer resisting passage of holes therethrough. Additional systems and methods are also presented.

An incremental block-line-Gauss-Seidel method for the Navier-Stokes equations

NASA Technical Reports Server (NTRS)

Napolitano, M.; Walters, R. W.

1985-01-01

A block-line-Gauss-Seidel (LGS) method is developed for solving the incompressible and compressible Navier-Stokes equations in two dimensions. The method requires only one block-tridiagonal solution process per iteration and is consequently faster per step than the linearized block-ADI methods. Results are presented for both incompressible and compressible separated flows: in all cases the proposed block-LGS method is more efficient than the block-ADI methods. Furthermore, for high Reynolds number weakly separated incompressible flow in a channel, which proved to be an impossible task for a block-ADI method, solutions have been obtained very efficiently by the new scheme.

Mosquito larvicidal effectiveness of EcoBio-Block S: a novel integrated water-purifying concrete block formulation containing insect growth regulator pyriproxyfen.

PubMed

Kawada, Hitoshi; Saita, Susumu; Shimabukuro, Kozue; Hirano, Masachika; Koga, Masayuki; Iwashita, Toshiaki; Takagi, Masahiro

2006-09-01

EcoBio-Block S, a novel controlled release system (CRS) for the insect growth regulator pyriproxyfen, uses a water-purifying concrete block system (EcoBio-Block) composed of a porous volcanic rock and cement, and it incorporates the aerobic bacterial groups of Bacillus subtilis natto. EcoBio-Block S showed high inhibitory activity against mosquito emergence as well as a water-purifying effect. Chemical analysis and bioassay showed that EcoBio-Block S provides a high-performance CRS that controls the release of pyriproxyfen at low levels according to "zero order kinetics".

[THE TECHNOLOGY "CELL BLOCK" IN CYTOLOGICAL PRACTICE].

PubMed

Volchenko, N N; Borisova, O V; Baranova, I B

2015-08-01

The article presents summary information concerning application of "cell block" technology in cytological practice. The possibilities of implementation of various modern techniques (immune cytochemnical analysis. FISH, CISH, polymerase chain reaction) with application of "cell block" method are demonstrated. The original results of study of "cell block" technology made with gelatin, AgarCyto and Shadon Cyoblock set are presented. The diagnostic effectiveness of "cell block" technology and common cytological smear and also immune cytochemical analysis on samples of "cell block" technology and fluid cytology were compared. Actually application of "cell block" technology is necessary for ensuring preservation of cell elements for subsequent immune cytochemical and molecular genetic analysis.

Systematic review of the effects of fascia iliaca compartment block on hip fracture patients before operation.

PubMed

Steenberg, J; Møller, A M

2018-06-01

Fascia iliaca compartment block is used for hip fractures in order to reduce pain, the need for systemic analgesia, and prevent delirium, on this basis. This systematic review was conducted to investigate the analgesic and adverse effects of fascia iliaca block on hip fracture in adults when applied before operation. Nine databases were searched from inception until July 2016 yielding 11 randomised and quasi-randomised controlled trials, all using loss of resistance fascia iliaca compartment block, with a total population of 1062 patients. Meta-analyses were conducted comparing the analgesic effect of fascia iliaca compartment block on nonsteroidal anti-inflammatory drugs (NSAIDs), opioids and other nerve blocks, preoperative analgesia consumption, and time to perform spinal anaesthesia compared with opioids and time for block placement. The analgesic effect of fascia iliaca compartment block was superior to that of opioids during movement, resulted in lower preoperative analgesia consumption and a longer time for first request, and reduced time to perform spinal anaesthesia. Block success rate was high and there were very few adverse effects. There is insufficient evidence to conclude anything on preoperative analgesic consumption or first request thereof compared with NSAIDs and other nerve blocks, postoperative analgesic consumption for preoperatively applied fascia iliaca compartment block compared with NSAIDs, opioids and other nerve blocks, incidence and severity of delirium, and length of stay or mortality. Fascia iliaca compartment block is an effective and relatively safe supplement in the preoperative pain management of hip fracture patients. Copyright © 2018 British Journal of Anaesthesia. Published by Elsevier Ltd. All rights reserved.

A novel combination of peripheral nerve blocks for arthroscopic shoulder surgery.

PubMed

Musso, D; Flohr-Madsen, S; Meknas, K; Wilsgaard, T; Ytrebø, L M; Klaastad, Ø

2017-10-01

Interscalene brachial plexus block is currently the gold standard for intra- and post-operative pain management for patients undergoing arthroscopic shoulder surgery. However, it is associated with block related complications, of which effect on the phrenic nerve have been of most interest. Side effects caused by general anesthesia, when this is required, are also a concern. We hypothesized that the combination of superficial cervical plexus block, suprascapular nerve block, and infraclavicular brachial plexus block would provide a good alternative to interscalene block and general anesthesia. Twenty adult patients scheduled for arthroscopic shoulder surgery received a combination of superficial cervical plexus block (5 ml ropivacaine 0.5%), suprascapular nerve block (4 ml ropivacaine 0.5%), and lateral sagittal infraclavicular block (31 ml ropivacaine 0.75%). The primary aim was to find the proportion of patients who could be operated under light propofol sedation, without the need for opioids or artificial airway. Secondary aims were patients' satisfaction and surgeons' judgment of the operating conditions. Nineteen of twenty patients (95% CI: 85-100) underwent arthroscopic shoulder surgery with light propofol sedation, but without opioids or artificial airway. The excluded patient was not comfortable in the beach chair position and therefore received general anesthesia. All patients were satisfied with the treatment on follow-up interviews. The surgeons rated the operating conditions as good for all patients. The novel combination of a superficial cervical plexus block, a suprascapular nerve block, and an infraclavicular nerve block provides an alternative anesthetic modality for arthroscopic shoulder surgery. © 2017 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Program structure-based blocking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bertolli, Carlo; Eichenberger, Alexandre E.; O'Brien, John K.

2017-09-26

Embodiments relate to program structure-based blocking. An aspect includes receiving source code corresponding to a computer program by a compiler of a computer system. Another aspect includes determining a prefetching section in the source code by a marking module of the compiler. Yet another aspect includes performing, by a blocking module of the compiler, blocking of instructions located in the prefetching section into instruction blocks, such that the instruction blocks of the prefetching section only contain instructions that are located in the prefetching section.

Additive Manufacturing of Molds for Fabrication of Insulated Concrete Block

DOE Office of Scientific and Technical Information (OSTI.GOV)

Love, Lonnie J.; Lloyd, Peter D.

ORNL worked with concrete block manufacturer, NRG Insulated Block, to demonstrate additive manufacturing of a multi-component block mold for its line of insulated blocks. Solid models of the mold parts were constructed from existing two-dimensional drawings and the parts were fabricated on a Stratasys Fortus 900 using ULTEM 9085. Block mold parts were delivered to NRG and installed on one of their fabrication lines. While form and fit were acceptable, the molds failed to function during NRG’s testing.

Novel Principle of Contactless Gauge Block Calibration

PubMed Central

Buchta, Zdeněk; Řeřucha, Šimon; Mikel, Břetislav; Čížek, Martin; Lazar, Josef; Číp, Ondřej

2012-01-01

In this paper, a novel principle of contactless gauge block calibration is presented. The principle of contactless gauge block calibration combines low-coherence interferometry and laser interferometry. An experimental setup combines Dowell interferometer and Michelson interferometer to ensure a gauge block length determination with direct traceability to the primary length standard. By monitoring both gauge block sides with a digital camera gauge block 3D surface measurements are possible too. The principle presented is protected by the Czech national patent No. 302948. PMID:22737012

Novel principle of contactless gauge block calibration.

PubMed

Buchta, Zdeněk; Reřucha, Simon; Mikel, Břetislav; Cížek, Martin; Lazar, Josef; Cíp, Ondřej

2012-01-01

In this paper, a novel principle of contactless gauge block calibration is presented. The principle of contactless gauge block calibration combines low-coherence interferometry and laser interferometry. An experimental setup combines Dowell interferometer and Michelson interferometer to ensure a gauge block length determination with direct traceability to the primary length standard. By monitoring both gauge block sides with a digital camera gauge block 3D surface measurements are possible too. The principle presented is protected by the Czech national patent No. 302948.

Interventional Management for Pelvic Pain.

PubMed

Nagpal, Ameet S; Moody, Erika L

2017-08-01

Interventional procedures can be applied for diagnostic evaluation and treatment of the patient with pelvic pain, often once more conservative measures have failed to provide relief. This article reviews interventional management strategies for pelvic pain. We review superior and inferior hypogastric plexus blocks, ganglion impar blocks, transversus abdominis plane blocks, ilioinguinal, iliohypogastric and genitofemoral blocks, pudendal nerve blocks, and selective nerve root blocks. Additionally, we discuss trigger point injections, sacroiliac joint injections, and neuromodulation approaches. Copyright © 2017 Elsevier Inc. All rights reserved.

The successively temporal error concealment algorithm using error-adaptive block matching principle

NASA Astrophysics Data System (ADS)

Lee, Yu-Hsuan; Wu, Tsai-Hsing; Chen, Chao-Chyun

2014-09-01

Generally, the temporal error concealment (TEC) adopts the blocks around the corrupted block (CB) as the search pattern to find the best-match block in previous frame. Once the CB is recovered, it is referred to as the recovered block (RB). Although RB can be the search pattern to find the best-match block of another CB, RB is not the same as its original block (OB). The error between the RB and its OB limits the performance of TEC. The successively temporal error concealment (STEC) algorithm is proposed to alleviate this error. The STEC procedure consists of tier-1 and tier-2. The tier-1 divides a corrupted macroblock into four corrupted 8 × 8 blocks and generates a recovering order for them. The corrupted 8 × 8 block with the first place of recovering order is recovered in tier-1, and remaining 8 × 8 CBs are recovered in tier-2 along the recovering order. In tier-2, the error-adaptive block matching principle (EA-BMP) is proposed for the RB as the search pattern to recover remaining corrupted 8 × 8 blocks. The proposed STEC outperforms sophisticated TEC algorithms on average PSNR by 0.3 dB on the packet error rate of 20% at least.

A new bite block for panoramic radiographs of anterior edentulous patients: A technical report.

PubMed

Park, Jong-Woong; Symkhampha, Khanthaly; Huh, Kyung-Hoe; Yi, Won-Jin; Heo, Min-Suk; Lee, Sam-Sun; Choi, Soon-Chul

2015-06-01

Panoramic radiographs taken using conventional chin-support devices have often presented problems with positioning accuracy and reproducibility. The aim of this report was to propose a new bite block for panoramic radiographs of anterior edentulous patients that better addresses these two issues. A new panoramic radiography bite block similar to the bite block for dentulous patients was developed to enable proper positioning stability for edentulous patients. The new bite block was designed and implemented in light of previous studies. The height of the new bite block was 18 mm and to compensate for the horizontal edentulous space, its horizontal width was 7 mm. The panoramic radiographs using the new bite block were compared with those using the conventional chin-support device. Panoramic radiographs taken with the new bite block showed better stability and bilateral symmetry than those taken with the conventional chin-support device. Patients also showed less movement and more stable positioning during panoramic radiography with the new bite block. Conventional errors in panoramic radiographs of edentulous patients could be caused by unreliability of the chin-support device. The newly proposed bite block for panoramic radiographs of edentulous patients showed better reliability. Further study is required to evaluate the image quality and reproducibility of images with the new bite block.

A novel fractal image compression scheme with block classification and sorting based on Pearson's correlation coefficient.

PubMed

Wang, Jianji; Zheng, Nanning

2013-09-01

Fractal image compression (FIC) is an image coding technology based on the local similarity of image structure. It is widely used in many fields such as image retrieval, image denoising, image authentication, and encryption. FIC, however, suffers from the high computational complexity in encoding. Although many schemes are published to speed up encoding, they do not easily satisfy the encoding time or the reconstructed image quality requirements. In this paper, a new FIC scheme is proposed based on the fact that the affine similarity between two blocks in FIC is equivalent to the absolute value of Pearson's correlation coefficient (APCC) between them. First, all blocks in the range and domain pools are chosen and classified using an APCC-based block classification method to increase the matching probability. Second, by sorting the domain blocks with respect to APCCs between these domain blocks and a preset block in each class, the matching domain block for a range block can be searched in the selected domain set in which these APCCs are closer to APCC between the range block and the preset block. Experimental results show that the proposed scheme can significantly speed up the encoding process in FIC while preserving the reconstructed image quality well.

Improving Parent-Child Relationships through Block Play

ERIC Educational Resources Information Center

Lin, Yen-Chun

2010-01-01

Blocks are one of the most popular playthings for children. The purpose of this article is to describe the use of block play in developing parent-child relations. This paper has two major parts. First, a brief historical overview highlights the critical roles of child's block play in learning and development. Block play contributes to children's…

24 CFR 3285.306 - Design procedures for concrete block piers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... block piers. 3285.306 Section 3285.306 Housing and Urban Development Regulations Relating to Housing and....306 Design procedures for concrete block piers. (a) Frame piers less than 36 inches high. (1) Frame... blocks, 8 inches “ 8 inches “ 16 inches, when the design capacity of the block is not exceeded. (2) The...

Porous block nanofiber composite filters

DOEpatents

Ginley, David S.; Curtis, Calvin J.; Miedaner, Alexander; Weiss, Alan J.; Paddock, Arnold

2016-08-09

Porous block nano-fiber composite (110), a filtration system (10) and methods of using the same are disclosed. An exemplary porous block nano-fiber composite (110) includes a porous block (100) having one or more pores (200). The porous block nano-fiber composite (110) also includes a plurality of inorganic nano-fibers (211) formed within at least one of the pores (200).

75 FR 16424 - Proposed Information Collection; Comment Request; Census Coverage Measurement Final Housing Unit...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

... unit is a block cluster, which consists of one or more geographically contiguous census blocks. As in... a number of distinct processes, ranging from forming block clusters, selecting the block clusters... sample of block clusters, while the E Sample is the census of housing units and enumerations in the same...

The influence of chain rigidity and the degree of sulfonation on the morphology of block copolymers as nano reactor

NASA Astrophysics Data System (ADS)

Hong, K.; Zhang, X.

2005-03-01

Polyelectrolyte block copolymer was used to form an ordered domain of ionic block as a ``nanoreactor'' due to its ability to bind oppositely charged metal ion, Zn^2+, Fe^2+ etc. The purpose of our research is to investigate the controllability of the size and morphology of domains (inorganic nano particles) by changing backbone stiffness, the charge density and the volume fraction of ionic block. Poly(styrene sulfonate) (PSS), which backbone is flexible, and poly(cyclohexadiene sulfonate) (PCHDS), which backbone is ``semiflexible'', were used as ionic blocks. We synthesized PtBS-PSS and PS-PCHDS with various degree of sulfonation and the volume fraction. Zinc oxide (ZnO) nano particles successfully formed in the ionic domain of microphase separated block copolymers. We used SANS to characterize the morphology of block copolymers and TEM for block copolymer containing ZnO nano particles. Our experimental results show that the chemistry of ``sulfonation'' of block copolymers can be successfully used to synthesize nano composite materials.

Block-Parallel Data Analysis with DIY2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morozov, Dmitriy; Peterka, Tom

DIY2 is a programming model and runtime for block-parallel analytics on distributed-memory machines. Its main abstraction is block-structured data parallelism: data are decomposed into blocks; blocks are assigned to processing elements (processes or threads); computation is described as iterations over these blocks, and communication between blocks is defined by reusable patterns. By expressing computation in this general form, the DIY2 runtime is free to optimize the movement of blocks between slow and fast memories (disk and flash vs. DRAM) and to concurrently execute blocks residing in memory with multiple threads. This enables the same program to execute in-core, out-of-core, serial,more » parallel, single-threaded, multithreaded, or combinations thereof. This paper describes the implementation of the main features of the DIY2 programming model and optimizations to improve performance. DIY2 is evaluated on benchmark test cases to establish baseline performance for several common patterns and on larger complete analysis codes running on large-scale HPC machines.« less

Chaotic Mountain Blocks in Pluto’s Sputnik Planitia

NASA Astrophysics Data System (ADS)

Singer, Kelsi N.; Knight, Katherine I.; Stern, S. Alan; Olkin, Catherine; Grundy, William M.; McKinnon, William B.; Moore, Jeffrey M.; Schenk, Paul M.; Spencer, John R.; Weaver, Harold A.; Young, Leslie; Ennico, Kimberly; New Horizons Geology, Geophysics and Imaging Science Theme Team, The New Horizons Surface Composition Science Theme Team

2017-10-01

One of the first high-resolution Pluto images returned by New Horizons displayed a collection of tall, jagged peaks rising out of the large nitrogen ice sheet informally known as Sputnik Planitia (SP). This mountain range was later revealed to be one of several along the western edge of SP. The mountains are several hundred broken-up blocks of Pluto’s primarily water ice lithosphere and some retain surface terrains similar to the nearby intact crust surrounding SP. Water ice with some fractures or porosity is likely >5% less dense than solid N2 ice at Pluto’s temperatures. Thus it is possible the blocks are, or were, floating icebergs or at least partially suspended to the point that some blocks appear to be tilted as if they have faltered (Moore et al., 2016, Science, 351, 1284-1293).We analyze four mountain ranges on the western edge of SP and compare to chaotic terrains on Europa and Mars. The blocks on Pluto have angular planforms but we characterize their size using block surface area converted to an equivalent circular diameter. Topography was used to define block extents. The blocks range in size from 3-30 km in diameter, with a mode of ~8-10 km. Blocks range from 0.2-3.8 km in height, and block height generally increases with block diameter. One or more dark layers can be identified in a few scarp faces, and are at a similar depth to each other and to layers seen in fault and crater walls elsewhere on Pluto. A large N-S trending fault system runs tangential to SP and may be the source of crustal disruption on the western side.On Europa and Mars block sizes vary greatly between different chaos regions, but Conamara Chaos has an average block size of ~5 km in diameter, smaller than that typically seen on Pluto. Also the blocks often transition into fractured terrain still connected to the surround lithosphere at the periphery of the chaos regions. The source regions for the blocks are more obvious on Europa and Mars. Additionally the block heights on Europa and Mars generally do not increase with block size. Thus, the main mechanism of crustal breakup is likely different between these bodies.

7. BLOCK HOUSE BASEMENT LOOKING THROUGH DOOR INTO CABLE TUNNEL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. BLOCK HOUSE BASEMENT LOOKING THROUGH DOOR INTO CABLE TUNNEL RUNNING BETWEEN BLOCK HOUSE AND STATIC TEST TOWER. - Marshall Space Flight Center, East Test Area, Block House, Huntsville, Madison County, AL

System and method for crystalline sheet growth using a cold block and gas jet

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kellerman, Peter L.; Mackintosh, Brian; Carlson, Frederick M.

A crystallizer for growing a crystalline sheet from a melt may include a cold block having a cold block surface that faces an exposed surface of the melt, the cold block configured to generate a cold block temperature at the cold block surface that is lower than a melt temperature of the melt at the exposed surface. The system may also include a nozzle disposed within the cold block and configured to deliver a gas jet to the exposed surface, wherein the gas jet and the cold block are interoperative to generate a process zone that removes heat from themore » exposed surface at a first heat removal rate that is greater than a second heat removal rate from the exposed surface in outer regions outside of the process zone.« less

High-bandwidth prefetcher for high-bandwidth memory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mehta, Sanyam; Kohn, James Robert; Ernst, Daniel Jonathan

A method for prefetching data into a cache is provided. The method allocates an outstanding request buffer ("ORB"). The method stores in an address field of the ORB an address and a number of blocks. The method issues prefetch requests for a degree number of blocks starting at the address. When a prefetch response is received for all the prefetch requests, the method adjusts the address of the next block to prefetch and adjusts the number of blocks remaining to be retrieved and then issues prefetch requests for a degree number of blocks starting at the adjusted address. The prefetchingmore » pauses when a maximum distance between the reads of the prefetched blocks and the last prefetched block is reached. When a read request for a prefetched block is received, the method resumes prefetching when a resume criterion is satisfied.« less

Do bilateral and unilateral greater occipital nerve block effectiveness differ in chronic migraine patients?

PubMed

Ünal-Artık, Hanzade Aybüke; İnan, Levent Ertuğrul; Ataç-Uçar, Ceyla; Yoldaş, Tahir Kurtuluş

2017-06-01

We aimed to compare the effectiveness of bilateral and unilateral block application in chronic migraine patients and whether there were differences in their effectiveness retrospectively. In chronic migraine patients undergoing Greater occipital nerve (GON) block, mean number of days with pain per month before and after block, mean duration of pain in attacks (in hours), and mean Visual Analog Scale (VAS) in attack and pain severity were recorded from files. The patients underwent one block a week for the first 1 month, thereafter one block a month according to GON block protocol used by our institute. Of 41 patients included in the study, 23 underwent unilateral block (group 1) and 18 underwent bilateral block (group 2). In both groups, number of days with migraine decreased significantly in 2 and 3 months as compared to pre-block treatment (P < 0.001). Mean duration of headache decreased in group 2 during treatment (P < 0.001). In group 1, mean duration of headache also decreased but did not differ significantly (P = 0.051). Mean severity of migraine decreased significantly differ in group 1 in 2, 3 months as compared to pre-block treatment (P < 0.001). No differences were observed in frequency, severity and duration of headache between groups during 3-month treatment period. GON block is effective in chronic migraine and bilateral application is no superior over unilateral application.

Reversible Nerve Conduction Block Using Kilohertz Frequency Alternating Current

PubMed Central

Kilgore, Kevin L.; Bhadra, Niloy

2013-01-01

Objectives The features and clinical applications of balanced-charge kilohertz frequency alternating currents (KHFAC) are reviewed. Preclinical studies of KHFAC block have demonstrated that it can produce an extremely rapid and reversible block of nerve conduction. Recent systematic analysis and experimentation utilizing KHFAC block has resulted in a significant increase in interest in KHFAC block, both scientifically and clinically. Materials and Methods We review the history and characteristics of KHFAC block, the methods used to investigate this type of block, the experimental evaluation of block, and the electrical parameters and electrode designs needed to achieve successful block. We then analyze the existing clinical applications of high frequency currents, comparing the early results with the known features of KHFAC block. Results Although many features of KHFAC block have been characterized, there is still much that is unknown regarding the response of neural structures to rapidly fluctuating electrical fields. The clinical reports to date do not provide sufficient information to properly evaluate the mechanisms that result in successful or unsuccessful treatment. Conclusions KHFAC nerve block has significant potential as a means of controlling nerve activity for the purpose of treating disease. However, early clinical studies in the use of high frequency currents for the treatment of pain have not been designed to elucidate mechanisms or allow direct comparisons to preclinical data. We strongly encourage the careful reporting of the parameters utilized in these clinical studies, as well as the development of outcome measures that could illuminate the mechanisms of this modality. PMID:23924075

Seamless contiguity method for parallel segmentation of remote sensing image

NASA Astrophysics Data System (ADS)

Wang, Geng; Wang, Guanghui; Yu, Mei; Cui, Chengling

2015-12-01

Seamless contiguity is the key technology for parallel segmentation of remote sensing data with large quantities. It can be effectively integrate fragments of the parallel processing into reasonable results for subsequent processes. There are numerous methods reported in the literature for seamless contiguity, such as establishing buffer, area boundary merging and data sewing. et. We proposed a new method which was also based on building buffers. The seamless contiguity processes we adopt are based on the principle: ensuring the accuracy of the boundary, ensuring the correctness of topology. Firstly, block number is computed based on data processing ability, unlike establishing buffer on both sides of block line, buffer is established just on the right side and underside of the line. Each block of data is segmented respectively and then gets the segmentation objects and their label value. Secondly, choose one block(called master block) and do stitching on the adjacent blocks(called slave block), process the rest of the block in sequence. Through the above processing, topological relationship and boundaries of master block are guaranteed. Thirdly, if the master block polygons boundaries intersect with buffer boundary and the slave blocks polygons boundaries intersect with block line, we adopt certain rules to merge and trade-offs them. Fourthly, check the topology and boundary in the buffer area. Finally, a set of experiments were conducted and prove the feasibility of this method. This novel seamless contiguity algorithm provides an applicable and practical solution for efficient segmentation of massive remote sensing image.

Space Launch Systems Block 1B Preliminary Navigation System Design

NASA Technical Reports Server (NTRS)

Oliver, T. Emerson; Park, Thomas; Anzalone, Evan; Smith, Austin; Strickland, Dennis; Patrick, Sean

2018-01-01

NASA is currently building the Space Launch Systems (SLS) Block 1 launch vehicle for the Exploration Mission 1 (EM-1) test flight. In parallel, NASA is also designing the Block 1B launch vehicle. The Block 1B vehicle is an evolution of the Block 1 vehicle and extends the capability of the NASA launch vehicle. This evolution replaces the Interim Cryogenic Propulsive Stage (ICPS) with the Exploration Upper Stage (EUS). As the vehicle evolves to provide greater lift capability, increased robustness for manned missions, and the capability to execute more demanding missions so must the SLS Integrated Navigation System evolved to support those missions. This paper describes the preliminary navigation systems design for the SLS Block 1B vehicle. The evolution of the navigation hard-ware and algorithms from an inertial-only navigation system for Block 1 ascent flight to a tightly coupled GPS-aided inertial navigation system for Block 1B is described. The Block 1 GN&C system has been designed to meet a LEO insertion target with a specified accuracy. The Block 1B vehicle navigation system is de-signed to support the Block 1 LEO target accuracy as well as trans-lunar or trans-planetary injection accuracy. Additionally, the Block 1B vehicle is designed to support human exploration and thus is designed to minimize the probability of Loss of Crew (LOC) through high-quality inertial instruments and robust algorithm design, including Fault Detection, Isolation, and Recovery (FDIR) logic.

Cellient™ automated cell block versus traditional cell block preparation: a comparison of morphologic features and immunohistochemical staining.

PubMed

Wagner, David G; Russell, Donna K; Benson, Jenna M; Schneider, Ashley E; Hoda, Rana S; Bonfiglio, Thomas A

2011-10-01

Traditional cell block (TCB) sections serve as an important diagnostic adjunct to cytologic smears but are also used today as a reliable preparation for immunohistochemical (IHC) studies. There are many ways to prepare a cell block and the methods continue to be revised. In this study, we compare the TCB with the Cellient™ automated cell block system. Thirty-five cell blocks were obtained from 16 benign and 19 malignant nongynecologic cytology specimens at a large university teaching hospital and prepared according to TCB and Cellient protocols. Cell block sections from both methods were compared for possible differences in various morphologic features and immunohistochemical staining patterns. In the 16 benign cases, no significant morphologic differences were found between the TCB and Cellient cell block sections. For the 19 malignant cases, some noticeable differences in the nuclear chromatin and cellularity were identified, although statistical significance was not attained. Immunohistochemical or special stains were performed on 89% of the malignant cases (17/19). Inadequate cellularity precluded full evaluation in 23% of Cellient cell block IHC preparations (4/17). Of the malignant cases with adequate cellularity (13/17), the immunohistochemical staining patterns from the different methods were identical in 53% of cases. The traditional and Cellient cell block sections showed similar morphologic and immunohistochemical staining patterns. The only significant difference between the two methods concerned the lower overall cell block cellularity identified during immunohistochemical staining in the Cellient cell block sections. Copyright © 2010 Wiley-Liss, Inc.

"Eyeball test" of thermographic patterns for predicting a successful lateral infraclavicular block.

PubMed

Andreasen, Asger M; Linnet, Karen E; Asghar, Semera; Rothe, Christian; Rosenstock, Charlotte V; Lange, Kai H W; Lundstrøm, Lars H

2017-11-01

Increased distal skin temperature can be used to predict the success of lateral infraclavicular (LIC) block. We hypothesized that an "eyeball test" of specific infrared thermographic patterns after LIC block could be used to determine block success. In this observational study, five observers trained in four distinct thermographic patterns independently evaluated thermographic images of the hands of 40 patients at baseline and at one-minute intervals for 30 min after a LIC block. Sensitivity, specificity, and predictive values of a positive and a negative test were estimated to evaluate the validity of specific thermographic patterns for predicting a successful block. Sensory and motor block of the musculocutaneous, radial, ulnar, and median nerves defined block success. Fleiss' kappa statistics of multiple interobserver agreements were used to evaluate reliability. As a diagnostic test, the defined specific thermographic patterns of the hand predicted a successful block with increasing accuracy over the 30-min observation period. Block success was predicted with a sensitivity of 92.4% (95% confidence interval [CI], 86.8 to 96.2) and with a specificity of 84.0% (95% CI, 70.3 to 92.4) at min 30. The Fleiss' kappa for the five observers was 0.87 (95% CI, 0.77 to 0.96). We conclude that visual evaluation by an eyeball test of specific thermographic patterns of the blocked hands may be useful as a valid and reliable diagnostic test for predicting a successful LIC block.

Improving atlas methodology

USGS Publications Warehouse

Robbins, C.S.; Dowell, B.A.; O'Brien, J.

1987-01-01

We are studying a sample of Maryland (2 %) and New Hampshire (4 %) Atlas blocks and a small sample in Maine. These three States used different sampling methods and block sizes. We compare sampling techniques, roadside with off-road coverage, our coverage with that of the volunteers, and different methods of quantifying Atlas results. The 7 1/2' (12-km) blocks used in the Maine Atlas are satisfactory for coarse mapping, but are too large to enable changes to be detected in the future. Most states are subdividing the standard 7 1/2' maps into six 5-km blocks. The random 1/6 sample of 5-km blocks used in New Hampshire, Vermont (published 1985), and many other states has the advantage of permitting detection of some changes in the future, but the disadvantage of leaving important habitats unsampled. The Maryland system of atlasing all 1,200 5-km blocks and covering one out of each six by quarterblocks (2 1/2-km) is far superior if enough observers can be found. A good compromise, not yet attempted, would be to Atlas a 1/6 random sample of 5-km blocks and also one other carefully selected (non-random) block on the same 7 1/2' map--the block that would include the best sample of habitats or elevations not in the random block. In our sample the second block raised the percentage of birds found from 86% of the birds recorded in the 7 1/2' quadrangle to 93%. It was helpful to list the expected species in each block and to revise this list annually. We estimate that 90-100 species could be found with intensive effort in most Maryland blocks; perhaps 95-105 in New Hampshire. It was also helpful to know which species were under-sampled so we could make a special effort to search for these. A total of 75 species per block (or 75% of the expected species in blocks with very restricted habitat diversity) is considered a practical and adequate goal in these States. When fewer than 60 species are found per block, a high proportion of the rarer species are missed, as well as some of the common ones. Similarity indices based on fewer than 60 species per block reflect coverage rather than habitat affinities. Atlas blocks that are ecologically similar should have similarity indices (S) of at least 0.80 to be considered adequately covered. S = 2C/(A + B), where C is the number of species in common and A and B are species totals for each of the two blocks being compared. A series of 15 13-minutes roadside stops yielded more species than 15 off-road stops, but off-road stops always had some species not detected at the roadside stops. A series of timed stops is an excellent way to map relative abundance if the stops are standardized with respect to time of day and weather, and the counts are made by observers of comparable ability. Efforts to estimate Atlas block populations in powers of 10 (as in the French Atlas) have not gained acceptance in U.S.A. Most observers feel unqualified to make estimates. An efficient way to Atlas a block is to make at least 3 early morning visits to 15 or more specific stops. Arrive in the block early enough to check for nocturnal species on at least two days; and after completing the specific stops, search the block for other species and for confirmations.

Large Block Test Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, W

2001-12-01

This report documents the Large-Block Test (LBT) conducted at Fran Ridge near Yucca Mountain, Nevada. The LBT was a thermal test conducted on an exposed block of middle non-lithophysal Topopah Spring tuff (Tptpmn) and was designed to assist in understanding the thermal-hydrological-mechanical-chemical (THMC) processes associated with heating and then cooling a partially saturated fractured rock mass. The LBT was unique in that it was a large (3 x 3 x 4.5 m) block with top and sides exposed. Because the block was exposed at the surface, boundary conditions on five of the six sides of the block were relatively wellmore » known and controlled, making this test both easier to model and easier to monitor. This report presents a detailed description of the test as well as analyses of the data and conclusions drawn from the test. The rock block that was tested during the LBT was exposed by excavation and removal of the surrounding rock. The block was characterized and instrumented, and the sides were sealed and insulated to inhibit moisture and heat loss. Temperature on the top of the block was also controlled. The block was heated for 13 months, during which time temperature, moisture distribution, and deformation were monitored. After the test was completed and the block cooled down, a series of boreholes were drilled, and one of the heater holes was over-cored to collect samples for post-test characterization of mineralogy and mechanical properties. Section 2 provides background on the test. Section 3 lists the test objectives and describes the block site, the site configuration, and measurements made during the test. Section 3 also presents a chronology of events associated with the LBT, characterization of the block, and the pre-heat analyses of the test. Section 4 describes the fracture network contained in the block. Section 5 describes the heating/cooling system used to control the temperature in the block and presents the thermal history of the block during the test. Sections 5 through 9 report the measurements made on the block during the preheating, heating, and cooling phases. These measurements include temperature, thermal conductivity and diffusivity, hydrological measurements (electrical resistivity, neutron logging, gas pressure, and relative humidity), geomechanics, selected chemical analyses, and microbial activity. These sections also include analyses and simulations of the block behavior. Finally, conclusions are presented in Section 10. Complete data sets were submitted during the time the test was conducted. The data tracking numbers (DTNs) of all of the data are presented in Table 1-1.« less

Masquerading bundle branch block as a presenting manifestation of complete atrioventricular block that caused syncope.

PubMed

Jiao, Zhenyu; Tian, Ying; Yang, Xinchun; Liu, Xingpeng

2017-10-01

A 59-year-old male patient was admitted with the main complaints of stuffiness and shortness of breath. An ECG from precordial leads on admission showed masquerading bundle branch block. Syncope frequently occurred after admission. During syncope episodes, ECG telemetry showed that the syncope was caused by intermittent complete atrioventricular block, with the longest RR interval lasting for 4.36 s. At the gap of syncope, ECG showed complete right bundle branch block accompanied by alternation of left anterior fascicular block and left posterior fascicular block. The patient was implanted with a dual-chamber permanent pacemaker. Follow-up of 9 months showed no reoccurrence of syncope.

Brief reports: plasma ropivacaine concentrations after ultrasound-guided rectus sheath block in patients undergoing lower abdominal surgery.

PubMed

Wada, Morito; Kitayama, Masato; Hashimoto, Hiroshi; Kudo, Tsuyoshi; Kudo, Mihoko; Takada, Norikazu; Hirota, Kazuyoshi

2012-01-01

A rectus sheath block can provide postoperative analgesia for midline incisions. However, information regarding the pharmacokinetics of local anesthetics used in this block is lacking. In this study, we detail the time course of ropivacaine concentrations after this block. Thirty-nine patients undergoing elective lower abdominal surgery were assigned to 3 groups receiving rectus sheath block with 20 mL of different concentrations of ropivacaine. Peak plasma concentrations were dose dependent, and there were no significant differences in the times to peak plasma concentrations. The present data also suggested a slower absorption kinetics profile for ropivacaine after rectus sheath block than other compartment blocks.

Evaluation of a Blocked-Trials Procedure to Establish Complex Stimulus Control over Intraverbal Responses in Children with Autism

ERIC Educational Resources Information Center

Ingvarsson, Einar T.; Kramer, Rachel L.; Carp, Charlotte L.; Pétursdóttir, Anna I.; Macias, Heather

2016-01-01

We evaluated the use of a blocked-trials procedure to establish complex stimulus control over intraverbal responses. The participants were four young boys with a diagnosis of autism who had struggled to master intraverbals. The blocked-trials procedures involved presentation of stimuli in separate trial blocks. The trial blocks gradually reduced…

47 CFR 27.1303 - Upper 700 MHz D Block license conditions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Upper 700 MHz D Block license conditions. 27... 700 MHz D Block license conditions. (a) The winning bidder at auction of the license for Block D in the 758-763 MHz and 788-793 MHz bands will be granted the Upper 700 MHz D Block license only after...

31 CFR 501.806 - Procedures for unblocking funds believed to have been blocked due to mistaken identity.

Code of Federal Regulations, 2010 CFR

2010-07-01

... believed to have been blocked due to mistaken identity. 501.806 Section 501.806 Money and Finance: Treasury... funds believed to have been blocked due to mistaken identity. When a transaction results in the blocking... party to the transaction believes the funds have been blocked due to mistaken identity, that party may...

Method for making block siloxane copolymers

DOEpatents

Butler, N.L.; Jessop, E.S.; Kolb, J.R.

1981-02-25

A method for synthesizing block polysiloxane copolymers is disclosed. Diorganoscyclosiloxanes and an end-blocking compound are interacted in the presence of a ring opening polymerization catalyst, producing a blocked prepolymer. The prepolymer is then interacted with a silanediol, resulting in condensation polymerization of the prepolymers. A second end-blocking compound is subsequently introduced to end-cap the polymers and copolymers formed from the condensation polymerization.

How can I tell where the valid data begins and ends in L1B2 products?

Atmospheric Science Data Center

2014-12-08

... of metadata fields to assist you in determining which data are relevant. All L1B2 files begin with block number 1, even though block ... and "End block" in order to locate valid data. Note : The missing underscore in End block is real. The L1B2 per-block metadata also ...

31 CFR 501.806 - Procedures for unblocking funds believed to have been blocked due to mistaken identity.

Code of Federal Regulations, 2012 CFR

2012-07-01

... believed to have been blocked due to mistaken identity. 501.806 Section 501.806 Money and Finance: Treasury... funds believed to have been blocked due to mistaken identity. When a transaction results in the blocking... party to the transaction believes the funds have been blocked due to mistaken identity, that party may...

31 CFR 501.806 - Procedures for unblocking funds believed to have been blocked due to mistaken identity.

Code of Federal Regulations, 2011 CFR

2011-07-01

... believed to have been blocked due to mistaken identity. 501.806 Section 501.806 Money and Finance: Treasury... funds believed to have been blocked due to mistaken identity. When a transaction results in the blocking... party to the transaction believes the funds have been blocked due to mistaken identity, that party may...

31 CFR 501.806 - Procedures for unblocking funds believed to have been blocked due to mistaken identity.

Code of Federal Regulations, 2013 CFR

2013-07-01

... believed to have been blocked due to mistaken identity. 501.806 Section 501.806 Money and Finance: Treasury... funds believed to have been blocked due to mistaken identity. When a transaction results in the blocking... party to the transaction believes the funds have been blocked due to mistaken identity, that party may...

31 CFR 501.806 - Procedures for unblocking funds believed to have been blocked due to mistaken identity.

Code of Federal Regulations, 2014 CFR

2014-07-01

... believed to have been blocked due to mistaken identity. 501.806 Section 501.806 Money and Finance: Treasury... funds believed to have been blocked due to mistaken identity. When a transaction results in the blocking... party to the transaction believes the funds have been blocked due to mistaken identity, that party may...

Choose Wisely: Static or Kinetic Friction--The Power of Dimensionless Plots

ERIC Educational Resources Information Center

Ludwigsen, Daniel; Svinarich, Kathryn

2009-01-01

Consider a problem of sliding blocks, one stacked atop the other, resting on a frictionless table. If the bottom block is pulled horizontally, nature makes a choice: if the applied force is small, static friction between the blocks accelerates the blocks together, but with a large force the blocks slide apart. In that case, kinetic friction still…

Method for making block siloxane copolymers

DOEpatents

Butler, Nora; Jessop, Edward S.; Kolb, John R.

1982-01-01

A method for synthesizing block polysiloxane copolymers. Diorganoscyclosiloxanes and an end-blocking compound are interacted in the presence of a ring opening polymerization catalyst, producing a blocked prepolymer. The prepolymer is then interacted with a silanediol, resulting in condensation polymerization of the prepolymers. A second end-blocking compound is subsequently introduced to end-cap the polymers and copolymers formed from the condensation polymerization.

Reversible chronic acquired complete atrioventricular block.

PubMed

Rakovec, P; Milcinski, G; Voga, G; Korsic, L

1982-01-01

The return of atrioventricular conduction is reported in a case after nearly four years of complete acquired heart block. After recovery from atrioventricular block, right bundle branch block persisted, but P-R interval and H-V interval were normal. Three months later a relapse of second degree infranodal atrioventricular block was noted. A short review of similar cases from the literature is given.

75 FR 26889 - Airworthiness Directives; Arrow Falcon Exporters, Inc. (previously Utah State University) et al...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-13

... the forward tip weight retention block (tip block) or aft tip closure (tip closure), loss of the blade...) forward tip weight retention block (tip block) and the aft tip closure (tip closure) for adhesive bond... prevent loss of a tip block or tip closure, loss of a blade, and subsequent loss of control of the...

76 FR 18322 - Federal Acquisition Regulation; Clarification of Standard Form 26-Award/Contract

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

.... This revised form includes changes above blocks 17 and 18 and in block 18 to clarify that block 18... blocks 17 and 18 of the Standard Form (SF) 26, Award/Contract. FAR 53.214(a) prescribes the SF 26 for use... identified instances in which contracting officers mistakenly checked block 18 when awarding negotiated, not...

Two cell cycle blocks caused by iron chelation of neuroblastoma cells: separating cell cycle events associated with each block

PubMed Central

Siriwardana, Gamini; Seligman, Paul A.

2013-01-01

Abstract Studies have presented evidence that besides the well described S phase block, treatment of cancer cell lines with the iron chelator deferrioxamine (DFO) also results in an earlier block in G1 phase. In this article, measurements of cell cycle regulatory proteins define this block at a very specific point in G1. DFO treatment results in markedly decreased cyclin A protein levels. Cyclin E levels that accumulate in early to mid‐G1 are increased in cells treated with DFO as compared to the resting cells. The DFO S phase block is shown after cells are arrested at G1/S by (aphidicolin) then released into DFO. The same S phase block occurs with DFO treatment of a neuroblastoma cell line relatively resistant to the G1 DFO block. These experiments clearly differentiate the S phase DFO block from the earlier block pinpointed to a point in mid‐G1, before G1/S when cyclin E protein increases but before increased cyclin A synthesis. Apoptosis was observed in cells inhibited by DFO at both cell cycle arrest points. PMID:24744856

Advantages of caudal block over intrarectal local anesthesia plus periprostatic nerve block for transrectal ultrasound guided prostate biopsy

PubMed Central

Wang, Na; Fu, Yaowen; Ma, Haichun; Wang, Jinguo; Gao, Yang

2016-01-01

Objective: To compare caudal block with intrarectal local anesthesia plus periprostatic nerve block for transrectal ultrasound guided prostate biopsy. Methods: One hundred and ninety patients scheduled for transrectal ultrasound guided prostate biopsy were randomized equally into Group-A who received caudal block (20 ml 1.2% lidocaine) and Group-B who received intrarectal local anesthesia (0.3% oxybuprocaine cream) plus periprostatic nerve block (10 ml 1% lidocaine plus 0.5% ropivacaine) before biopsy. During and after the procedure, the patients rated the level of pain/discomfort at various time points. Complications during the whole study period and the patient overall satisfaction were also evaluated. Results: More pain and discomfort was detected during periprostatic nerve block than during caudal block. Pain and discomfort was significantly lower during prostate biopsy and during the manipulation of the probe in the rectum in Group-A than in Group-B. No significant differences were detected in the pain intensity after biopsy and side effects between the two groups. Conclusions: Caudal block provides better anesthesia than periprostatic nerve block plus intrarectal local anesthesia for TRUS guided prostate biopsy without an increase of side effects. PMID:27648052

Transversus abdominal plane (TAP) block for postoperative pain management: a review.

PubMed

Jakobsson, Jan; Wickerts, Liselott; Forsberg, Sune; Ledin, Gustaf

2015-01-01

Transversus abdominal plane (TAP) block has a long history and there is currently extensive clinical experience around TAP blocks. The aim of this review is to provide a summary of the present evidence on the effects of TAP block and to provide suggestions for further studies. There are several approaches to performing abdominal wall blocks, with the rapid implementation of ultrasound-guided technique facilitating a major difference in TAP block performance. During surgery, an abdominal wall block may also be applied by the surgeon from inside the abdominal cavity. Today, there are more than 11 meta-analyses providing a compiled evidence base around the effects of TAP block. These analyses include different procedures, different techniques of TAP block administration and, importantly, they compare the TAP block with a variety of alternative analgesic regimes. The effects of TAP block during laparoscopic cholecystectomy seem to be equivalent to local infiltration analgesia and also seem to be beneficial during laparoscopic colon resection. The effects of TAP are more pronounced when it is provided prior to surgery and these effects are local anaesthesia dose-dependent. TAP block seems an interesting alternative in patients with, for example, severe obesity where epidural or spinal anaesthesia/analgesia is technically difficult and/or poses a risk. There is an obvious need for further high-quality studies comparing TAP block prior to surgery with local infiltration analgesia, single-shot spinal analgesia, and epidural analgesia. These studies should be procedure-specific and the effects should be evaluated, both regarding short-term pain and analgesic requirement and also including the effects on postoperative nausea and vomiting, recovery of bowel function, ambulation, discharge, and protracted recovery outcomes (assessed by e.g., postoperative quality of recovery scale).

Feasibility of blocking detection in observations from radio occultation

NASA Astrophysics Data System (ADS)

Brunner, Lukas; Steiner, Andrea Karin; Scherllin-Pirscher, Barbara; Jury, Martin

2015-04-01

Blocking describes an atmospheric situation in which the climatological westerly flow at mid latitudes is weakened or reversed. This is caused by a persistent high pressure system which can be stationary for several days to weeks. In the Northern Hemisphere blocking preferably occurs over the Atlantic/European and the Pacific regions. In recent years blocking has been under close scientific investigation due to its effect on weather extremes, triggering heat waves in summer and cold spells in winter. So far, scientific literature mainly focused on the investigation of blocking in reanalysis and global climate model data sets. However, blocking is underestimated in most climate models due to small-scale processes involved in its evolution. For a detection of blocking, most commonly applied methods are based on the computation of meridional geopotential height gradients at the 500 hPa level. Therefore measurements with adequate vertical, horizontal, and temporal resolution and coverage are required. We use an observational data set based on Global Positioning System (GPS) Radio Occultation (RO) measurements fulfilling these requirements. RO is a relatively new, satellite based remote sensing technique, delivering profiles of atmospheric parameters such as geopotential height, pressure, and temperature. It is characterized by favorable properties like long-term stability, global coverage, and high vertical resolution. Our data set is based on the most recent WEGC RO retrieval. Here we report on a feasibility study for blocking detection and analysis in RO data for two exemplary blocking events: the blocking over Russia in summer 2010 and the blocking over Greenland in late winter 2013. For these two events about 700 RO measurements per day are available in the Northern Hemisphere. We will show that the measurement density and quality of RO observations are favorable for blocking analysis and can therefore contribute to blocking research.

Novel High Efficient Organic Photovoltaic Materials

NASA Technical Reports Server (NTRS)

Sun, Sam; Haliburton, James; Wang, Yi-Qing; Fan, Zhen; Taft, Charles; Maaref, Shahin; Bailey, Sheila (Technical Monitor)

2003-01-01

Solar energy is a renewable, nonpolluting, and most abundant energy source for human exploration of a remote site or outer space. In order to generate appreciable electrical power in space or on the earth, it is necessary to collect sunlight from large areas and with high efficiency due to the low density of sunlight. Future organic or polymer (plastic) solar cells appear very attractive due to their unique features such as light weight, flexible shape, tunability of energy band-gaps via versatile molecular or supramolecular design, synthesis, processing and device fabrication schemes, and much lower cost on large scale industrial production. It has been predicted that supramolecular and nano-phase separated block copolymer systems containing electron rich donor blocks and electron deficient acceptor blocks may facilitate the charge carrier separation and migration due to improved electronic ultrastructure and morphology in comparison to polymer composite system. This presentation will describe our recent progress in the design, synthesis and characterization of a novel block copolymer system containing donor and acceptor blocks covalently attached. Specifically, the donor block contains an electron donating alkyloxy derivatized polyphenylenevinylene (RO-PPV), the acceptor block contains an electron withdrawing alkyl-sulfone derivatized polyphenylenevinylene (SF-PPV). The key synthetic strategy includes the synthesis of each individual block first, then couple the blocks together. While the donor block has a strong PL emission at around 560 nm, and acceptor block has a strong PL emission at around 520 nm, the PL emissions of final block copolymers are severely quenched. This verifies the expected electron transfer and charge separation due to interfaces of donor and acceptor nano phase separated blocks. The system therefore has potential for variety light harvesting applications, including high efficient photovoltaic applications.

Termites live in a material world: exploration of their ability to differentiate between food sources.

PubMed

Inta, Ra; Lai, Joseph C S; Fu, Eugene W; Evans, Theodore A

2007-08-22

Drywood termites are able to assess wood size using vibratory signals, although the exact mechanism behind this assessment ability is not known. Important vibratory characteristics such as the modal frequencies of a wooden block depend on its geometry and boundary conditions; however, they are also dependent on the material characteristics of the block, such as mass, density and internal damping. We report here on choice experiments that tested the ability of the drywood termite Cryptotermes secundus to assess wooden block size using a solid wooden block paired with a composite block, the latter made of either wood and aluminium or wood and rubber. Each composite block was constructed to match mass or low-frequency vibratory modes (i.e. fundamental frequency) of the solid wooden block. The termites always chose the blocks with more wood; they moved to the solid wooden blocks usually within a day and then tunnelled further into the solid wooden block by the end of the experiment. Termites offered composite blocks of wood and rubber matched for mass were the slowest to show a preference for the solid wooden block and this preference was the least definitive of any treatment, which indicated that mass and/or damping may play a role in food assessment. This result clearly shows that the termites were not fooled by composite blocks matched for mass or frequency, which implies that they probably employ more than a single simple measure in their food assessment strategy. This implies a degree of sophistication in their ability to assess their environment hitherto unknown. The potential importance of alternative features in the vibrational signals is discussed.

Testing block subdivision algorithms on block designs

NASA Astrophysics Data System (ADS)

Wiseman, Natalie; Patterson, Zachary

2016-01-01

Integrated land use-transportation models predict future transportation demand taking into account how households and firms arrange themselves partly as a function of the transportation system. Recent integrated models require parcels as inputs and produce household and employment predictions at the parcel scale. Block subdivision algorithms automatically generate parcel patterns within blocks. Evaluating block subdivision algorithms is done by way of generating parcels and comparing them to those in a parcel database. Three block subdivision algorithms are evaluated on how closely they reproduce parcels of different block types found in a parcel database from Montreal, Canada. While the authors who developed each of the algorithms have evaluated them, they have used their own metrics and block types to evaluate their own algorithms. This makes it difficult to compare their strengths and weaknesses. The contribution of this paper is in resolving this difficulty with the aim of finding a better algorithm suited to subdividing each block type. The proposed hypothesis is that given the different approaches that block subdivision algorithms take, it's likely that different algorithms are better adapted to subdividing different block types. To test this, a standardized block type classification is used that consists of mutually exclusive and comprehensive categories. A statistical method is used for finding a better algorithm and the probability it will perform well for a given block type. Results suggest the oriented bounding box algorithm performs better for warped non-uniform sites, as well as gridiron and fragmented uniform sites. It also produces more similar parcel areas and widths. The Generalized Parcel Divider 1 algorithm performs better for gridiron non-uniform sites. The Straight Skeleton algorithm performs better for loop and lollipop networks as well as fragmented non-uniform and warped uniform sites. It also produces more similar parcel shapes and patterns.

Significant role of structural fractures in Ren-Qiu buried-block oil field, eastern China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fei, Q.; Xie-Pei, W.

1983-03-01

Ren-qui oil field is in a buried block of Sinian (upper Proterozoic) rocks located in the Ji-zhong depression of the western Bohai Bay basin in eastern China. The main reservoir consists of Sinian dolomite rocks. It is a fault block with a large growth fault on the west side which trends north-northeast with throws of up to 1 km (0.6 mi) or more. The source rocks for the oil are Paleogene age and overlie the Sinian dolomite rocks. The structural fractures are the main factor forming the reservoir of the buried-block oil field. Three structural lines, trending northeast, north-northeast, andmore » northwest, form the regional netted fracture system. The north-northeast growth fault controlled the structural development of the buried block. The block was raised and eroded before the Tertiary sediments were deposited. In the Eocene Epoch, the Ji-zhong depression subsided, but the deposition, faulting, and related uplift of the block happened synchronously as the block was gradually submerged. At the same time, several horizontal and vertical karst zones were formed by the karst water along the netted structural fractures. The Eocene oil source rocks lapped onto the block and so the buried block, with many developed karst fractures, was surrounded by a great thickness of source rocks. As the growth fault developed, the height of the block was increased from 400 m (1300 ft) before the Oligocene to 1300 m (4250 ft) after. As the petroleum was generated, it migrated immediately into the karst fractures of the buried block along the growth fault. The karst-fractured block reservoir has an 800-m (2600-ft) high oil-bearing closure and good connections developed between the karst fractures.« less

How to block and tackle the face.

PubMed

Zide, B M; Swift, R

1998-03-01

Regional blocking techniques as noted in dentistry, anesthesia, and anatomy texts may result in inconsistent and imperfect analgesia when needed for facial aesthetic surgery. The advent of laser facial surgery and more complicated aesthetic facial procedures has thus increased the demand for anesthesia support. Surgeons should know a fail-safe method of nerve blocks. Fresh cadaver dissections are used to demonstrate a series of eight regional nerve-blocking routes. This sequence of bilateral blocks will routinely provide profound full facial anesthesia. Certain groupings of blocks are effective for perioral or periorbital laser surgery.

Amplifying (Im)perfection: The Impact of Crystallinity in Discrete and Disperse Block Co-oligomers

PubMed Central

2017-01-01

Crystallinity is seldomly utilized as part of the microphase segregation process in ultralow-molecular-weight block copolymers. Here, we show the preparation of two types of discrete, semicrystalline block co-oligomers, comprising an amorphous oligodimethylsiloxane block and a crystalline oligo-l-lactic acid or oligomethylene block. The self-assembly of these discrete materials results in lamellar structures with unforeseen uniformity in the domain spacing. A systematic introduction of dispersity reveals the extreme sensitivity of the microphase segregation process toward chain length dispersity in the crystalline block. PMID:28994585

Atmospheric Blocking and Intercomparison of Objective Detection Methods: Flow Field Characteristics

NASA Astrophysics Data System (ADS)

Pinheiro, M. C.; Ullrich, P. A.; Grotjahn, R.

2017-12-01

A number of objective methods for identifying and quantifying atmospheric blocking have been developed over the last couple of decades, but there is variable consensus on the resultant blocking climatology. This project examines blocking climatologies as produced by three different methods: two anomaly-based methods, and the geopotential height gradient method of Tibaldi and Molteni (1990). The results highlight the differences in blocking that arise from the choice of detection method, with emphasis on the physical characteristics of the flow field and the subsequent effects on the blocking patterns that emerge.

Amplifying (Im)perfection: The Impact of Crystallinity in Discrete and Disperse Block Co-oligomers.

PubMed

van Genabeek, Bas; Lamers, Brigitte A G; de Waal, Bas F M; van Son, Martin H C; Palmans, Anja R A; Meijer, E W

2017-10-25

Crystallinity is seldomly utilized as part of the microphase segregation process in ultralow-molecular-weight block copolymers. Here, we show the preparation of two types of discrete, semicrystalline block co-oligomers, comprising an amorphous oligodimethylsiloxane block and a crystalline oligo-l-lactic acid or oligomethylene block. The self-assembly of these discrete materials results in lamellar structures with unforeseen uniformity in the domain spacing. A systematic introduction of dispersity reveals the extreme sensitivity of the microphase segregation process toward chain length dispersity in the crystalline block.

A Comparison of Jump Height, Takeoff Velocities, and Blocking Coverage in the Swing and Traditional Volleyball Blocking Techniques

PubMed Central

Ficklin, Travis; Lund, Robin; Schipper, Megan

2014-01-01

The purpose of this study was to compare traditional and swing blocking techniques on center of mass (COM) projectile motion and effective blocking area in nine healthy Division I female volleyball players. Two high-definition (1080 p) video cameras (60 Hz) were used to collect two-dimensional variables from two separate views. One was placed perpendicular to the plane of the net and the other was directed along the top of the net, and were used to estimate COM locations and blocking area in a plane parallel to the net and hand penetration through the plane of the net respectively. Video of both the traditional and swing techniques were digitized and kinematic variables were calculated. Paired samples t-tests indicated that the swing technique resulted in greater (p < 0.05) vertical and horizontal takeoff velocities (vy and vx), jump height (H), duration of the block (tBLOCK), blocking coverage during the block (C) as well as hand penetration above and through the net’s plane (YPEN, ZPEN). The traditional technique had significantly greater approach time (tAPP). The results of this study suggest that the swing technique results in both greater jump height and effective blocking area. However, the shorter tAPP that occurs with swing is associated with longer times in the air during the block which may reduce the ability of the athlete to make adjustments to attacks designed to misdirect the defense. Key Points Swing blocking technique has greater jump height, effective blocking area, hand penetration, horizontal and vertical takeoff velocity, and has a shorter time of approach. Despite these advantages, there may be more potential for mistiming blocks and having erratic deflections of the ball after contact when using the swing technique. Coaches should take more than simple jump height and hand penetration into account when deciding which technique to employ. PMID:24570609

A comparison of jump height, takeoff velocities, and blocking coverage in the swing and traditional volleyball blocking techniques.

PubMed

Ficklin, Travis; Lund, Robin; Schipper, Megan

2014-01-01

The purpose of this study was to compare traditional and swing blocking techniques on center of mass (COM) projectile motion and effective blocking area in nine healthy Division I female volleyball players. Two high-definition (1080 p) video cameras (60 Hz) were used to collect two-dimensional variables from two separate views. One was placed perpendicular to the plane of the net and the other was directed along the top of the net, and were used to estimate COM locations and blocking area in a plane parallel to the net and hand penetration through the plane of the net respectively. Video of both the traditional and swing techniques were digitized and kinematic variables were calculated. Paired samples t-tests indicated that the swing technique resulted in greater (p < 0.05) vertical and horizontal takeoff velocities (vy and vx), jump height (H), duration of the block (tBLOCK), blocking coverage during the block (C) as well as hand penetration above and through the net's plane (YPEN, ZPEN). The traditional technique had significantly greater approach time (tAPP). The results of this study suggest that the swing technique results in both greater jump height and effective blocking area. However, the shorter tAPP that occurs with swing is associated with longer times in the air during the block which may reduce the ability of the athlete to make adjustments to attacks designed to misdirect the defense. Key PointsSwing blocking technique has greater jump height, effective blocking area, hand penetration, horizontal and vertical takeoff velocity, and has a shorter time of approach.Despite these advantages, there may be more potential for mistiming blocks and having erratic deflections of the ball after contact when using the swing technique.Coaches should take more than simple jump height and hand penetration into account when deciding which technique to employ.

Dependence of present and future European heat waves and cold spells on the location of atmospheric blocking

NASA Astrophysics Data System (ADS)

Brunner, L.; Schaller, N.; Sillmann, J.; Steiner, A. K.

2017-12-01

Atmospheric blocking describes stationary anti-cyclones, which weaken or reverse the climatological flow at mid-latitudes. In the northern hemisphere one of the main blocking regions is located over the North Atlantic and Northern Europe. The link between blocking and European temperature extremes, such as heat waves and cold spells, strongly depends on several aspects like season, longitudinal location of the block, and location of the extremes (particularly Northern Europe versus Southern Europe). We use a 50-member ensemble of the Canadian CanESM2 model to investigate historical (1981-2010) and future (2070-2099) blocking cases and their relationship with European temperature extremes. For the historical period the model results are also compared to those from the ERA-Interim reanalysis. Atmospheric blocking is detected on a daily basis in different 30° longitude windows between 60°W and 60°E, using a standard geopotential height-based detection index. Temperature extremes are defined by the daily Heat/Cold Wave Magnitude Index (HWMId/CWMId). The role of cold advection is found particularly important in winter conditions leading to a more than threefold increase in cold wave occurrence during blocking between 60°W and 0°. During blocking over Northern Europe (0° to 60°E) a split relationship is found with cold wave occurrence being strongly increased in Southern Europe, while it is decreased in Northern Europe. Direct, radiative effects dominate in summer, therefore blocking westward of Europe has a weaker effect, while blocking over Northern Europe leads to an increase of heat waves by at least a factor three at the location of the block and a decrease in cold wave occurrence in almost all of Europe. Comparing the historical and future period we find the link between blocking and temperature extremes in Europe to be robust, even though blocking frequency and temperatures are changing.

Cooperative Interactions between Different Classes of Disordered Proteins Play a Functional Role in the Nuclear Pore Complex of Baker’s Yeast

PubMed Central

Ando, David; Gopinathan, Ajay

2017-01-01

Nucleocytoplasmic transport is highly selective, efficient, and is regulated by a poorly understood mechanism involving hundreds of disordered FG nucleoporin proteins (FG nups) lining the inside wall of the nuclear pore complex (NPC). Previous research has concluded that FG nups in Baker’s yeast (S. cerevisiae) are present in a bimodal distribution, with the “Forest Model” classifying FG nups as either di-block polymer like “trees” or single-block polymer like “shrubs”. Using a combination of coarse-grained modeling and polymer brush modeling, the function of the di-block FG nups has previously been hypothesized in the Di-block Copolymer Brush Gate (DCBG) model to form a higher-order polymer brush architecture which can open and close to regulate transport across the NPC. In this manuscript we work to extend the original DCBG model by first performing coarse grained simulations of the single-block FG nups which confirm that they have a single block polymer structure rather than the di-block structure of tree nups. Our molecular simulations also demonstrate that these single-block FG nups are likely cohesive, compact, collapsed coil polymers, implying that these FG nups are generally localized to their grafting location within the NPC. We find that adding a layer of single-block FG nups to the DCBG model increases the range of cargo sizes which are able to translocate the pore through a cooperative effect involving single-block and di-block FG nups. This effect can explain the puzzling connection between single-block FG nup deletion mutants in S. cerevisiae and the resulting failure of certain large cargo transport through the NPC. Facilitation of large cargo transport via single-block and di-block FG nup cooperativity in the nuclear pore could provide a model mechanism for designing future biomimetic pores of greater applicability. PMID:28068389

On the representation of atmospheric blocking in EURO-CORDEX control runs

NASA Astrophysics Data System (ADS)

Jury, Martin W.; García, Sixto; Gutiérrez, José M.

2017-04-01

While regional climate models (RCMs) have been shown to yield improved projections, due to better representations of orography and higher resolved scales, impacts on mesoscale phenomena like atmospheric blocking have been hardly addressed. In this study we clarify if the EURO-CORDEX domain is large enough to allow the RCMs to significantly amplify the blocking representation in reference to the underlying driving data. Therefore, we analyzed blocking accompanying anomalies in temperature near the surface (TAS) and precipitation rate (PR) for a set of RCMs. 5 RCMs stem from the ensemble of EURO-CORDEX control runs, while 3 RCMs are WRF models with different nudging realizations, all of them are driven by ERA-Interim. The used blocking detection method detects blockings by localizing high pressure systems between 55°N and 65°N with the use of geopotential height gradients on the 500 hPa level (Z500), and was applied to ERA-Interim and the mentioned RCM data between 1981 and 2010. Detected blockings centers were spatially attributed to three sectors, which have been shown to display distinctive impacts on TAS and PR during blocking episodes. As a reference for TAS and PR we used 86 weather stations across Europe from the ECA&D dataset. Our results indicate, that little improvement can be expected in the representation of Z500 fields by the RCMs. Most of them show less blocking than the driving data, while blocking representation was most in agreement with the driving data for RCMs that have been strongly conditioned to the driving data. Further, in our idealized setting the RCMs were not able to reproduce the anomalies for TAS connected to blocking. Moreover, using the blocking index of the driving data could be considered correct, because the representation of TAS and PR for falsely detected blocking and non-blocking days in the RCMs did not deviate strongly.

Evaluation of carbonate apatite blocks fabricated from dicalcium phosphate dihydrate blocks for reconstruction of rabbit femoral and tibial defects.

PubMed

Kanazawa, Masayuki; Tsuru, Kanji; Fukuda, Naoyuki; Sakemi, Yuta; Nakashima, Yasuharu; Ishikawa, Kunio

2017-06-01

This study aimed to evaluate in vivo behavior of a carbonate apatite (CO 3 Ap) block fabricated by compositional transformation via a dissolution-precipitation reaction using a calcium hydrogen phosphate dihydrate [DCPD: CaHPO 4 ·2H 2 O] block as a precursor. These blocks were used to reconstruct defects in the femur and tibia of rabbits, using sintered dense hydroxyapatite (HAp) blocks as the control. Both the CO 3 Ap and HAp blocks showed excellent tissue response and good osteoconductivity. HAp block maintained its structure even after 24 weeks of implantation, so no bone replacement of the implant was observed throughout the post-implantation period in either femoral or tibial bone defects. In contrast, CO 3 Ap was resorbed with increasing time after implantation and replaced with new bone. The CO 3 Ap block was resorbed approximately twice as fast at the metaphysis of the proximal tibia than at the epiphysis of the distal femur. The CO 3 Ap block was resorbed at an approximately linear change over time, with complete resorption was estimated by extrapolation of data at approximately 1-1.5 years. Hence, the CO 3 Ap block fabricated in this study has potential value as an ideal artificial bone substitute because of its resorption and subsequent replacement by bone.

The dependence of the modulation transfer function on the blocking layer thickness in amorphous selenium x-ray detectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunter, David M.; Belev, Gueorgi; DeCrescenzo, Giovanni

2007-08-15

Blocking layers are used to reduce leakage current in amorphous selenium detectors. The effect of the thickness of the blocking layer on the presampling modulation transfer function (MTF) and on dark current was experimentally determined in prototype single-line CCD-based amorphous selenium (a-Se) x-ray detectors. The sampling pitch of the detectors evaluated was 25 {mu}m and the blocking layer thicknesses varied from 1 to 51 {mu}m. The blocking layers resided on the signal collection electrodes which, in this configuration, were used to collect electrons. The combined thickness of the blocking layer and a-Se bulk in each detector was {approx}200 {mu}m. Asmore » expected, the dark current increased monotonically as the thickness of the blocking layer was decreased. It was found that if the blocking layer thickness was small compared to the sampling pitch, it caused a negligible reduction in MTF. However, the MTF was observed to decrease dramatically at spatial frequencies near the Nyquist frequency as the blocking layer thickness approached or exceeded the electrode sampling pitch. This observed reduction in MTF is shown to be consistent with predictions of an electrostatic model wherein the image charge from the a-Se is trapped at a characteristic depth within the blocking layer, generally near the interface between the blocking layer and the a-Se bulk.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

He Yongzhou; Zhang Jidong; Zhou Qiaogen

Two in-vacuum undulators IVU25s and one elliptically polarized undulator EPU100 have been developed for SSRF. Two IVU25s with the same hybrid design contain about 640 Sm{sub 2}Co{sub 17} magnet blocks and the dimension of blocks is 65 Wx25 Hx9 D. The EPU100 of the APPLE-II type contains about 690 NdFeB magnet blocks with the dimension of 35 Wx35 Hx25 D. This paper describes the magnetic measurements of these magnet blocks with the Helmholtz coil measurement system for IVU25 magnet blocks and the Hall probe measurement system for EPU100 magnet blocks. The measured maximum magnetic moment deviation and the maximum anglemore » deviation are less than {+-}1.0% and 1.1 deg. respectively both for Sm{sub 2}Co{sub 17} blocks and NdFeB blocks and satisfy the specifications of undulators.« less

Automatic extraction of blocks from 3D point clouds of fractured rock

NASA Astrophysics Data System (ADS)

Chen, Na; Kemeny, John; Jiang, Qinghui; Pan, Zhiwen

2017-12-01

This paper presents a new method for extracting blocks and calculating block size automatically from rock surface 3D point clouds. Block size is an important rock mass characteristic and forms the basis for several rock mass classification schemes. The proposed method consists of four steps: 1) the automatic extraction of discontinuities using an improved Ransac Shape Detection method, 2) the calculation of discontinuity intersections based on plane geometry, 3) the extraction of block candidates based on three discontinuities intersecting one another to form corners, and 4) the identification of "true" blocks using an improved Floodfill algorithm. The calculated block sizes were compared with manual measurements in two case studies, one with fabricated cardboard blocks and the other from an actual rock mass outcrop. The results demonstrate that the proposed method is accurate and overcomes the inaccuracies, safety hazards, and biases of traditional techniques.

Analysis of genome rearrangement by block-interchanges.

PubMed

Lu, Chin Lung; Lin, Ying Chih; Huang, Yen Lin; Tang, Chuan Yi

2007-01-01

Block-interchanges are a new kind of genome rearrangements that affect the gene order in a chromosome by swapping two nonintersecting blocks of genes of any length. More recently, the study of such rearrangements is becoming increasingly important because of its applications in molecular evolution. Usually, this kind of study requires to solve a combinatorial problem, called the block-interchange distance problem, which is to find a minimum number of block-interchanges between two given gene orders of linear/circular chromosomes to transform one gene order into another. In this chapter, we shall introduce the basics of block-interchange rearrangements and permutation groups in algebra that are useful in analyses of genome rearrangements. In addition, we shall present a simple algorithm on the basis of permutation groups to efficiently solve the block-interchange distance problem, as well as ROBIN, a web server for the online analyses of block-interchange rearrangements.

Extrapunitive and intropunitive individuals activate different parts of the prefrontal cortex under an ego-blocking frustration.

PubMed

Minamoto, Takehiro; Osaka, Mariko; Yaoi, Ken; Osaka, Naoyuki

2014-01-01

Different people make different responses when they face a frustrating situation: some punish others (extrapunitive), while others punish themselves (intropunitive). Few studies have investigated the neural structures that differentiate extrapunitive and intropunitive individuals. The present fMRI study explored these neural structures using two different frustrating situations: an ego-blocking situation which blocks a desire or goal, and a superego-blocking situation which blocks self-esteem. In the ego-blocking condition, the extrapunitive group (n = 9) showed greater activation in the bilateral ventrolateral prefrontal cortex, indicating that these individuals prefer emotional processing. On the other hand, the intropunitive group (n = 9) showed greater activation in the left dorsolateral prefrontal cortex, possibly reflecting an effortful control for anger reduction. Such patterns were not observed in the superego-blocking condition. These results indicate that the prefrontal cortex is the source of individual differences in aggression direction in the ego-blocking situation.

Collection of gravitropic effectors from mucilage of electrotropically-stimulated roots of Zea mays L

NASA Technical Reports Server (NTRS)

Fondren, W. M.; Moore, R.

1987-01-01

We placed agar blocks adjacent to tips of electrotropically stimulated primary roots of Zea mays. Blocks placed adjacent to the anode-side of the roots for 3 h induced significant curvature when subsequently placed asymmetrically on tips of vertically-oriented roots. Curvature was always toward the side of the root unto which the agar block was placed. Agar blocks not contacting roots and blocks placed adjacent to the cathode-side of electrotropically stimulated roots did not induce significant curvature when placed asymmetrically on tips of vertically-oriented roots. Atomic absorption spectrophotometry indicated that blocks adjacent to the anode-side of electrotropically-stimulated roots contained significantly more calcium than (1) blocks not contacting roots, and (2) blocks contacting the cathode-side of roots. These results demonstrate the presence of a gradient of endogenous Ca in mucilage of electrotropically-stimulated roots (i.e. roots undergoing gravitropic-like curvature).

Fermion-scalar conformal blocks

DOE PAGES

Iliesiu, Luca; Kos, Filip; Poland, David; ...

2016-04-13

In this study, we compute the conformal blocks associated with scalar-scalar-fermionfermion 4-point functions in 3D CFTs. Together with the known scalar conformal blocks, our result completes the task of determining the so-called ‘seed blocks’ in three dimensions. In addition, conformal blocks associated with 4-point functions of operators with arbitrary spins can now be determined from these seed blocks by using known differential operators.

Neutronic reactor

DOEpatents

Lewis, Warren R.

1978-05-30

A graphite-moderated, water-cooled nuclear reactor including a plurality of rectangular graphite blocks stacked in abutting relationship in layers, alternate layers having axes which are normal to one another, alternate rows of blocks in alternate layers being provided with a channel extending through the blocks, said channeled blocks being provided with concave sides and having smaller vertical dimensions than adjacent blocks in the same layer, there being nuclear fuel in the channels.

Adolescent Boys' and Girls' Block Constructions Differ in Structural Balance: A Block-Building Characteristic Related to Math Achievement

ERIC Educational Resources Information Center

Casey, Beth M.; Pezaris, Elizabeth E.; Bassi, Julie

2012-01-01

Two studies were conducted on block building in adolescents, assessing middle school (Study 1) and high school students (Study 2). Students were asked to build something interesting with blocks. In both samples, the same pattern of gender differences were found; boys built taller structures than girls, and balanced a larger number of blocks on a…

The Breakdown: Hillslope Sources of Channel Blocks in Bedrock Landscapes

NASA Astrophysics Data System (ADS)

Selander, B.; Anderson, S. P.; Rossi, M.

2017-12-01

Block delivery from hillslopes is a poorly understood process that influences bedrock channel incision rates and shapes steep terrain. Previous studies demonstrate that hillslope sediment delivery rate and grain size increases with channel downcutting rate or fracture density (Attal et al., 2015, ESurf). However, blocks that exceed the competence of the channel can inhibit incision. In Boulder Creek, a bedrock channel in the Colorado Front Range, large boulders (>1 m diameter) are most numerous in the steepest channel reaches; their distribution seems to reflect autogenic channel-hillslope feedback between incision rate and block delivery (Shobe et al., 2016, GRL). It is clear that the processes, rates of production, and delivery of large blocks from hillslopes into channels are critical to our understanding of steep terrain evolution. Fundamental questions are 1) whether block production or block delivery is rate limiting, 2) what mechanisms release blocks, and 3) how block production and transport affect slope morphology. As a first step, we map rock outcrops on the granodiorite hillslopes lining Boulder Creek within Boulder Canyon using a high resolution DEM. Our algorithm uses high ranges of curvature values in conjunction with slopes steeper than the angle of repose to quickly identify rock outcrops. We field verified mapped outcrop and sediment-mantled locations on hillslopes above and below the channel knickzone. We find a greater abundance of exposed rock outcrops on steeper hillslopes in Boulder Canyon. Additionally, we find that channel reaches with large in-channel blocks are located at the base of hillslopes with large areas of exposed bedrock, while reaches lacking large in-channel blocks tend to be at the base of predominately soil mantled and forested hillslopes. These observations support the model of block delivery and channel incision of Shobe et al. (2016, GRL). Moreover, these results highlight the conundrum of how rapid channel incision is sustained if large blocks inhibit channel incision. This work points to the need to understand mechanisms of block release, the fate of released blocks, and how both processes influence the evolution of rocky hillslopes.

Inexpensive position sensitive detector block for dedicated PET cameras using 40-mm diameter PMT in quadrant sharing configuration

NASA Astrophysics Data System (ADS)

Uribe, J.; Aykac, M.; Baghaei, H.; Li, Hongdi; Wang, Yu; Liu, Yaqiang; Wong, V.; Xing, Tao; Ramirez, R.; Wong, Wai-Hoi

2003-06-01

Recent approvals by CMS (HCFA) for reimbursement of positron emission tomography (PET) scans fuels the rapid grow of the PET market, thus creating the need for more affordable dedicated PET scanners. The objective of the work presented here was the development of a BGO position-sensitive block with similar detector area (40 mm /spl times/ 40 mm) and same number of crystals (8 /spl times/ 8) as the block of a commercial BGO PET, using the less expensive photomultiplier quadrant sharing (PQS) technique. This block is coupled to four single-anode 40-mm diameter photomultipliers (PMT) instead of the 19-mm PMT used in a popular commercial BGO PET, and each PMT is shared by four adjacent detector blocks. Potentially, this design needs only 25% of the number of PMT used in the commercial BGO PET. In order not to waste the unused half-row of PMT at the edges of a detector panel/module when the module is made up solely of square blocks, an extended rectangular block has to be developed for the edge-blocks in the module, which maximized the use of the PMT and minimized the gap between modules. Only the extended block needs to be developed to derive the design for all the blocks in the module because the symmetric square block uses the same light-distributing partitions as those along the short side of the extended rectangular block. White-paint masks applied with accurate templates and airbrush were fine-tuned for every pair of adjacent crystals. The experimental block developed in this study provided good crystal-decoding. The composite energy spectrum of all 64 crystals showed a prominent photopeak. The worst crystal sitting in the air space between 4 round PMTs still has 60% of the signal pulse height as the best crystal. The average energy resolution was 21.8% for 511 keV gamma (range 17% - 28.7%) that compared well with the 22% - 44% measured with GE and CTI blocks. The image resolution provided by the PQS blocks is expected to be comparable to that of commercial BGO PETs as similar size crystals were decoded.

Observing atmospheric blocking with GPS radio occultation - one decade of measurements

NASA Astrophysics Data System (ADS)

Brunner, Lukas; Steiner, Andrea

2017-04-01

Atmospheric blocking has received a lot of attention in recent years due to its impact on mid-latitude circulation and subsequently on weather extremes such as cold and warm spells. So far blocking studies have been based mainly on re-analysis data or model output. However, it has been shown that blocking frequency exhibits considerable inter-model spread in current climate models. Here we use one decade (2006 to 2016) of satellite-based observations from GPS radio occultation (RO) to analyze blocking in RO data building on work by Brunner et al. (2016). Daily fields on a 2.5°×2.5° longitude-latitude grid are calculated by applying an adequate gridding strategy to the RO measurements. For blocking detection we use a standard blocking detection algorithm based on 500 hPa geopotential height (GPH) gradients. We investigate vertically resolved atmospheric variables such as GPH, temperature, and water vapor before, during, and after blocking events to increase process understanding. Moreover, utilizing the coverage of the RO data set, we investigate global blocking frequencies. The main blocking regions in the northern and southern hemisphere are identified and the (vertical) atmospheric structure linked to blocking events is compared. Finally, an inter-comparison of results from RO data to different re-analyses, such as ERA-Interim, MERRA 2, and JRA-55, is presented. Brunner, L., A. K. Steiner, B. Scherllin-Pirscher, and M. W. Jury (2016): Exploring atmospheric blocking with GPS radio occultation observations. Atmos. Chem. Phys., 16, 4593-4604, doi:10.5194/acp-16-4593-2016.

Effect of course coordinator behavior and motivation on students' achievement: Results from five curriculum blocks of two undergraduate student cohorts at King Saud bin Abdulaziz University of Health Sciences.

PubMed

Al-Alwan, Ibrahim; Baig, Lubna Ansari; Badri, Motasim; Magzoub, Mohi Eldin; Alyousif, Sarah

2015-01-01

The purpose of the study was to assess the relationship between students' perception of course/block coordinators performance and attributes with students' assessment scores in respective courses. This retrospective data based study was conducted at the College of Medicine, King Saud bin Abdulaziz University of Health Sciences (KSAU-HS). It was started in March 2013 and completed in June 2013 after the graduation of the fourth cohort. Exam score of 3(rd) and 4(th) cohort of students from the courses taught in the last two years of medical school were correlated with faculty and block evaluation done by the students. Scores from mid-block MCQs, portfolio scores, OSCEs and end-of-block MCQs were obtained. The Mean scores of all the assessments for all five blocks were not significantly different for both batches. There was significant difference between block coordinators for students' score on portfolio, midterm exam and the final written exam. The students' Score in OSCE had significantly strong correlation with quality of station monitors, coverage of content and flow between stations. Student's perception of the commitment and motivation of the coordinator was strongly correlated with block organization, availability of clinical cases, performance of block coordinator, cooperation with students, and organization of clinical activities. Block coordinator's motivation and commitment affects quality of block organization and student`s success. Faculty training programs should include block management competencies and components identified through self-determination theory for improving the intrinsic motivation for students success.

Detrital zircons from phanerozoic rocks of the Songliao Block, NE China: Evidence and tectonic implications

NASA Astrophysics Data System (ADS)

Zhou, Jian-Bo; Wilde, Simon A.; Zhang, Xing-Zhou; Liu, Fu-Lai; Liu, Jian-Hui

2012-03-01

Rocks that crop out in the northern part of the Songliao Block are mainly consist of high-grade metamorphic gneiss, Paleozoic strata and Mesozoic granites. They are essentially similar to rocks reported from beneath the Songliao Basin that occupies the majority of the Songliao Block. Four samples of Paleozoic metasedimentary rocks from Tieli in the north-eastern part of the Songliao Block yield detrital zircon U-Pb ages ranging from 2690 to 501 Ma, with four age populations at: 2071-2690 Ma, with a peak at 2585 Ma; 1776-1997 Ma, with a peak at 1890 Ma; 719-991 Ma, with a peak at 800 Ma; and 501-592 Ma, with a peak at 518 Ma. These are similar to age populations in other parts of the Central Asian Orogenic Belt (CAOB), although sediments from the Songliao Block contain more abundant Archean and Proterozoic detrital zircons than the neighboring Jiamusi-Khanka Block to the east and Xing'an Block to the west. This may indicate that rocks of this age comprise a minor component of the Songliao Block. The Pan-African zircon ages from the Songliao Block, taken together with ˜500 Ma magmatic and high-grade metamorphic zircons obtained from the nearby Erguna, Xing'an and Jiamusi-Khanka blocks, indicate that Pan-African events affected all blocks of the CAOB in NE China. This suggests that these blocks not only share a common basement, but that they had a common history. An extensive Late Pan-African (˜500 Ma) orogenic terrane thus occupies much of the CAOB in NE China.

Right bundle branch block and anterior wall ST elevation myocardial infarction.

PubMed

Trofin, Monica; Israel, Carsten W; Barold, S Serge

2017-09-01

We report the case of an acute anterior wall ST elevation myocardial infarction with new left anterior fascicular block and pre-existing right bundle branch block. Due to a wide right bundle branch block, no ST segment elevation was visible in lead V1. The left anterior fascicular block was caused by proximal occlusion of the left artery descending and disappeared after acute revascularization. However, also the R' of the right bundle branch block became significantly shorter after revascularization, dismanteling a minor ST segment elevation. The ST elevation in lead V1 in anterior wall infarction and right bundle branch block may merge with the R' and cause a further QRS widening as an "equivalent" to the ST elevation.

Cell block eleven, looking from the "Death Row" exercise yard, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Cell block eleven, looking from the "Death Row" exercise yard, facing north (note cell block fifteen to the right and cell block fourteen in the distance_ - Eastern State Penitentiary, 2125 Fairmount Avenue, Philadelphia, Philadelphia County, PA

SLS Block 1-B and Exploration Upper Stage Navigation System Design

NASA Technical Reports Server (NTRS)

Oliver, T. Emerson; Park, Thomas B.; Smith, Austin; Anzalone, Evan; Bernard, Bill; Strickland, Dennis; Geohagan, Kevin; Green, Melissa; Leggett, Jarred

2018-01-01

The SLS Block 1B vehicle is planned to extend NASA's heavy lift capability beyond the initial SLS Block 1 vehicle. The most noticeable change for this vehicle from SLS Block 1 is the swapping of the upper stage from the Interim Cryogenic Propulsion stage (ICPS), a modified Delta IV upper stage, to the more capable Exploration Upper Stage (EUS). As the vehicle evolves to provide greater lift capability and execute more demanding missions so must the SLS Integrated Navigation System to support those missions. The SLS Block 1 vehicle carries two independent navigation systems. The responsibility of the two systems is delineated between ascent and upper stage flight. The Block 1 navigation system is responsible for the phase of flight between the launch pad and insertion into Low-Earth Orbit (LEO). The upper stage system assumes the mission from LEO to payload separation. For the Block 1B vehicle, the two functions are combined into a single system intended to navigate from ground to payload insertion. Both are responsible for self-disposal once payload delivery is achieved. The evolution of the navigation hardware and algorithms from an inertial-only navigation system for Block 1 ascent flight to a tightly coupled GPS-aided inertial navigation system for Block 1-B is described. The Block 1 GN&C system has been designed to meet a LEO insertion target with a specified accuracy. The Block 1-B vehicle navigation system is designed to support the Block 1 LEO target accuracy as well as trans-lunar or trans-planetary injection accuracy. This is measured in terms of payload impact and stage disposal requirements. Additionally, the Block 1-B vehicle is designed to support human exploration and thus is designed to minimize the probability of Loss of Crew (LOC) through high-quality inertial instruments and Fault Detection, Isolation, and Recovery (FDIR) logic. The preliminary Block 1B integrated navigation system design is presented along with the challenges associated with meeting the design objectives. This paper also addresses the design considerations associated with the use of Block 1 and Commercial Off-the-Shelf (COTS) avionics for Block 1-B/EUS as part of an integrated vehicle suite for orbital operations.

Cracking the Stoping Paradigm: Field and Modeling Constraints From the Sierra Nevada Batholith

NASA Astrophysics Data System (ADS)

Pignotta, G. S.; Paterson, S. R.; Okaya, D.

2001-12-01

The significance of stoping during pluton emplacement remains a controversial issue. This mechanism has fallen out of favor recently largely due to the apparent lack of stoped blocks preserved in plutons. Our field studies in plutons in a variety of tectonic settings clearly show evidence of stoping. This is not surprising since stoping should be favored when large thermal gradients exist at magma-host rock boundaries. Preservation of stoped blocks is uncommon however, since the rate at which blocks sink is much greater than the rate at which magmas crystallize (Paterson and Okaya, 1999). Thus, only during final crystallization when magmatic yield strength is high, should stoped blocks be trapped. The Mitchell Peak granodiorite, Sierra Nevada is a rare example of a pluton that preserves abundant stoped blocks, with the youngest intrusive phase preserving >25% stoped blocks, and locally, near the margins >50% of exposed surface area is stoped blocks. Thus stoping is an important process here, at least during the final stages of emplacement. This area is ideal to study the mechanisms of block formation and disintegration using both field and modeling techniques, because of abundant stoped blocks, excellent exposure, and nature of host rock. The host rock is a slightly older, coarse grained, granodioritic intrusion that preserves extremely weak to no magmatic fabric, and thus can be treated as a "homogeneous and isotropic" medium for the purposes of thermal-mechanical modeling. Detailed mapping indicates that preserved stoped blocks range in size from hundreds of m's to xenocrystic feldspars, and there is abundant evidence for mechanical disintegration of blocks. Thermal-mechanical models, using detailed maps from the Mitchell Peak area, further support field observations. Rates at which thermal stresses develop and exceed host rock tensile strength are extremely rapid (hours to days) compared to onset of crystal plastic flow and/or melting. The calculated pattern of thermal stresses (i.e. high magnitudes at block corners) strongly supports rapid mechanical breakdown of stoped blocks. We suggest that rapid disintegration coupled with rapid rates of sinking of blocks explains the lack of observable blocks in plutons, and is an effective way to contaminate magmas thermally, mechanically and chemically. Furthermore, lack of observable stoped blocks in plutons should not be used as evidence that stoping did not occur.

Surgical anesthesia with a combination of T12 paravertebral block and lumbar plexus, sacral plexus block for hip replacement in ankylosing spondylitis: CARE-compliant 4 case reports.

PubMed

Ke, Xijian; Li, Ji; Liu, Yong; Wu, Xi; Mei, Wei

2017-06-26

Anesthesia management for patients with severe ankylosing spondylitis scheduled for total hip arthroplasty is challenging due to a potential difficult airway and difficult neuraxial block. We report 4 cases with ankylosing spondylitis successfully managed with a combination of lumbar plexus, sacral plexus and T12 paravertebral block. Four patients were scheduled for total hip arthroplasty. All of them were diagnosed as severe ankylosing spondylitis with rigidity and immobilization of cervical and lumbar spine and hip joints. A combination of T12 paravertebral block, lumbar plexus and sacral plexus block was successfully used for the surgery without any additional intravenous anesthetic or local anesthetics infiltration to the incision, and none of the patients complained of discomfort during the operations. The combination of T12 paravertebral block, lumbar plexus and sacral plexus block, which may block all nerves innervating the articular capsule, surrounding muscles and the skin involved in total hip arthroplasty, might be a promising alternative for total hip arthroplasty in ankylosing spondylitis.

Hemicellulose block copolymers made from woods for wide-range directed self-assembly lithography enabling wider range of applicable patterning size

NASA Astrophysics Data System (ADS)

Morita, Kazuyo; Yamamoto, Kimiko

2017-03-01

Xylan, one of hemicellulose family, block copolymer was newly developed for wide-range directed self-assembly lithography (DSA). Xylan is higher hydrophilic material because of having many hydroxy groups in one molecule. It means that xylan block copolymer has a possibility of high-chi block copolymer. Generally, DSA is focused on microphase separation for smaller size with high-chi block copolymer and not well known for larger size. In this study, xylan block copolymer was confirmed enabling wider range of patterning size, from smaller size to larger size. The key of xylan block copolymer is a new molecular structure of block copolymer and sugar chain control technology. Sugar content is the important parameter for not only micro-phase separation property but also line edge roughness (LER) and defects. Based on the sugar control technology, wide-range (hp 8.3nm to 26nm L/S and CD 10nm to 51nm hole) DSA patterning was demonstrated. Additionally it was confirmed that xylan block copolymer is suitable for sequential infiltration synthesis (SIS) process.

Light extraction block with curved surface

DOEpatents

Levermore, Peter; Krall, Emory; Silvernail, Jeffrey; Rajan, Kamala; Brown, Julia J.

2016-03-22

Light extraction blocks, and OLED lighting panels using light extraction blocks, are described, in which the light extraction blocks include various curved shapes that provide improved light extraction properties compared to parallel emissive surface, and a thinner form factor and better light extraction than a hemisphere. Lighting systems described herein may include a light source with an OLED panel. A light extraction block with a three-dimensional light emitting surface may be optically coupled to the light source. The three-dimensional light emitting surface of the block may includes a substantially curved surface, with further characteristics related to the curvature of the surface at given points. A first radius of curvature corresponding to a maximum principal curvature k.sub.1 at a point p on the substantially curved surface may be greater than a maximum height of the light extraction block. A maximum height of the light extraction block may be less than 50% of a maximum width of the light extraction block. Surfaces with cross sections made up of line segments and inflection points may also be fit to approximated curves for calculating the radius of curvature.

The rapid cooling of the Nansha Block, southern South China Sea

NASA Astrophysics Data System (ADS)

Dong, M.; Zhang, J.

2017-12-01

Since the Late Cretaceous and Cenozoic, the Nansha Block has experienced a series of tectonic process and separated from South China continent to the south. As an exotic micro-continental, Nansha Block has an obvious different lithospheric rheology property from surrounding region. The lithosphere and mantle dynamic and rheology are mainly controlled by temperature. Therefore, we calculated the 3D temperature field and geothermal gradient of Nansha Block's upper mantle by using the S-wave velocity structure from surface wave tomography. The results show that the depth where temperature of 1300° as the lithospheric thickness is in close correspondence with the top of the seismic low velocity zone. The temperature of the upper mantle in Nansha Block is significantly lower than that of surrounding. It implies that Nansha Block experienced a rapid cooling event. We propose that the rapid cooling can be partly attributed to three reasons: 1) Nansha Block is a relatively stable block with no interior geothermal activity. 2) No external heat source to provide energy. 3) Abnormal mantle convection under Nansha Block accelerated the cooling.

Flash memory management system and method utilizing multiple block list windows

NASA Technical Reports Server (NTRS)

Chow, James (Inventor); Gender, Thomas K. (Inventor)

2005-01-01

The present invention provides a flash memory management system and method with increased performance. The flash memory management system provides the ability to efficiently manage and allocate flash memory use in a way that improves reliability and longevity, while maintaining good performance levels. The flash memory management system includes a free block mechanism, a disk maintenance mechanism, and a bad block detection mechanism. The free block mechanism provides efficient sorting of free blocks to facilitate selecting low use blocks for writing. The disk maintenance mechanism provides for the ability to efficiently clean flash memory blocks during processor idle times. The bad block detection mechanism provides the ability to better detect when a block of flash memory is likely to go bad. The flash status mechanism stores information in fast access memory that describes the content and status of the data in the flash disk. The new bank detection mechanism provides the ability to automatically detect when new banks of flash memory are added to the system. Together, these mechanisms provide a flash memory management system that can improve the operational efficiency of systems that utilize flash memory.

Soft magnetic characteristics of laminated magnetic block cores assembled with a high Bs nanocrystalline alloy

NASA Astrophysics Data System (ADS)

Yao, Atsushi; Inoue, Masaki; Tsukada, Kouhei; Fujisaki, Keisuke

2018-05-01

This paper focuses on an evaluation of core losses in laminated magnetic block cores assembled with a high Bs nanocrystalline alloy in high magnetic flux density region. To discuss the soft magnetic properties of the high Bs block cores, the comparison with amorphous (SA1) block cores is also performed. In the high Bs block core, both low core losses and high saturation flux densities Bs are satisfied in the low frequency region. Furthermore, in the laminated block core made of the high Bs alloy, the rate of increase of iron losses as a function of the magnetic flux density remains small up to around 1.6 T, which cannot be realized in conventional laminated block cores based on amorphous alloy. The block core made of the high Bs alloy exhibits comparable core loss with that of amorphous alloy core in the high-frequency region. Thus, it is expected that this laminated high Bs block core can achieve low core losses and high saturation flux densities in the high-frequency region.

Separation of Poly(styrene-block-t-butyl methacrylate) Copolymers by Various Liquid Chromatography Techniques

PubMed Central

Šmigovec Ljubič, Tina; Pahovnik, David; Žigon, Majda; Žagar, Ema

2012-01-01

The separation of a mixture of three poly(styrene-block-t-butyl methacrylate) copolymers (PS-b-PtBMA), consisting of polystyrene (PS) blocks of similar length and t-butyl methacrylate (PtBMA) blocks of different lengths, was performed using various chromatographic techniques, that is, a gradient liquid chromatography on reversed-phase (C18 and C8) and normal-phase columns, a liquid chromatography under critical conditions for polystyrene as well as a fully automated two-dimensional liquid chromatography that separates block copolymers by chemical composition in the first dimension and by molar mass in the second dimension. The results show that a partial separation of the mixture of PS-b-PtBMA copolymers can be achieved only by gradient liquid chromatography on reversed-phase columns. The coelution of the two block copolymers is ascribed to a much shorter PtBMA block length, compared to the PS block, as well as a small difference in the length of the PtBMA block in two of these copolymers, which was confirmed by SEC-MALS and NMR spectroscopy. PMID:22489207

Automatic Blocking Of QR and LU Factorizations for Locality

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yi, Q; Kennedy, K; You, H

2004-03-26

QR and LU factorizations for dense matrices are important linear algebra computations that are widely used in scientific applications. To efficiently perform these computations on modern computers, the factorization algorithms need to be blocked when operating on large matrices to effectively exploit the deep cache hierarchy prevalent in today's computer memory systems. Because both QR (based on Householder transformations) and LU factorization algorithms contain complex loop structures, few compilers can fully automate the blocking of these algorithms. Though linear algebra libraries such as LAPACK provides manually blocked implementations of these algorithms, by automatically generating blocked versions of the computations, moremore » benefit can be gained such as automatic adaptation of different blocking strategies. This paper demonstrates how to apply an aggressive loop transformation technique, dependence hoisting, to produce efficient blockings for both QR and LU with partial pivoting. We present different blocking strategies that can be generated by our optimizer and compare the performance of auto-blocked versions with manually tuned versions in LAPACK, both using reference BLAS, ATLAS BLAS and native BLAS specially tuned for the underlying machine architectures.« less

Selective Absorption Mechanism for the Maintenance of Blocking

NASA Astrophysics Data System (ADS)

Yamazaki, Akira; Itoh, Hisanori

2010-05-01

Atmospheric blocking is one of the most influential phenomena in global atmospheric environments. The understanding of its dynamical processes is important to clarify weather extremes and the stratosphere-troposphere coupling and to extend forecast periods. In the dynamics of blocking, especially, its maintenance mechanism has been a stimulating topic for many meteorologists. About the maintenance mechanism of blocking, Shutts (1983) evaluated the effect of synoptic eddies in his numerical model and proposed the Eddy Straining Mechanism (hereafter, referred to as ESM). Using simple numerical models, he demonstrated that synoptic eddies strained in the north-south direction by blocking provide negative/positive vorticity to a blocking high/low and this vorticity forcing, i.e., the second-order flow maintains the blocking dipole structure against dissipation. Some pieces of evidence, however have shown that the ESM does not work well in several real cases of the block maintenance. For example, Arai and Mukougawa (2002) performed a similar experiment to Shutts (1983) and indicated the strong sensitivity of the ESM against a small meridional shift of the stormtrack (strictly speaking, wavemaker), or a small change of the size of high-frequency eddies. This is a very adverse constraint in the real atmosphere because the relative positions of blocking to the stormtrack tend to fluctuate from case to case so that they do not necessarily exist in the same latitude band. Thus, we propose a more realistic mechanism of the block maintenance named as the Selective Absorption Mechanism (hereafter referred to as SAM), in which a blocking anticyclone selectively and exclusively absorbs synoptic anticyclones. This mechanism is essentially the same mechanism as the Fujiwhara effect, which qualitatively explains that binary eddies with the same polarity merge and eddies with the opposite polarity separate. In this study, we verify the effectiveness of the SAM by observational analyses and simple numerical experiments. Ten episodes of blocking that occurred in the mid-North Pacific and the eastern North Atlantic between 1990 and 2005 are investigated. Trajectories of synoptic anticyclones and cyclones during blocking persistent periods are analyzed and show the selective absorption of anticyclonic eddies by the blocking highs. We also perform numerical experiments using the nonlinear barotropic vorticity equation on a beta-plane channel. The maintenance rate of blocking is quantitatively evaluated by using an areal averaged method. The result supports the block maintenance by the SAM. From the above two results, we can conclude that the SAM is more adaptive as the block maintenance mechanism than the ESM, because the essence of the SAM is absorption of eddies, not but eddy straining.

49 CFR 236.804 - Signal, block.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Signal, block. 236.804 Section 236.804 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Signal, block. A roadway signal operated either automatically or manually at the entrance to a block. ...

Cell block one and southeast guard tower, looking from the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Cell block one and southeast guard tower, looking from the central guard tower, facing southeast (note view also includes cell block ten (left) and cell block nine (right)) - Eastern State Penitentiary, 2125 Fairmount Avenue, Philadelphia, Philadelphia County, PA

A Characterization of BIB Designs Based on v Treatments in Blocks of Size k Whose Number of Blocks is at Least vCk.

DTIC Science & Technology

1981-01-01

Discrete Math . 6, 189-200. Foody, W. and A. Hedayat, (1977). On theory and applications of BIB designs with repeated blocks. Ann. Statist. 5, i •, 932...945. Corrections: Ann. Statist. 7 (1979). 925. van Lint, J.I1. and H.J. Ryser (1972). Block designs with repeated blocks. Discrete Math ., 3, 381-396

Making Your Own Hollow Blocks. What We Make. Science and Technology Education in Philippine Society.

ERIC Educational Resources Information Center

Philippines Univ., Quezon City. Inst. for Science and Mathematics Education Development.

The procedures needed to make hollow blocks from palay hull, sawdust, soil, or sand are outlined in this module. Also outlined are the procedures needed to construct the wooden molds used to make the blocks. The hollow blocks can be used in building a one story house where the roof does not rest on the hollow block wall, an additional room to the…

The Use of Liposomal Bupivacaine in Erector Spinae Plane Block to Minimize Opioid Consumption for Breast Surgery: A Case Report.

PubMed

Kumar, Amanda; Hulsey, Alina; Martinez-Wilson, Hector; Kim, James; Gadsden, Jeff

2018-05-01

The erector spinae plane block is a novel interfascial plane block that can provide thoracic and abdominal analgesia. We describe a patient with opioid intolerance scheduled for breast surgery who received an erector spinae plane block with liposomal bupivacaine as well as a supplemental T1 paravertebral block resulting in profound analgesia throughout her postoperative course. This case report demonstrates that use of liposomal bupivacaine in the erector spinae plane block can be successful in providing extended duration postoperative analgesia and minimizing systemic opioid requirements.

The Use of Liposomal Bupivacaine in Erector Spinae Plane Block to Minimize Opioid Consumption for Breast Surgery: A Case Report.

PubMed

Kumar, Amanda; Hulsey, Alina; Martinez-Wilson, Hector; Kim, James; Gadsden, Jeff

2017-11-16

The erector spinae plane block is a novel interfascial plane block that can provide thoracic and abdominal analgesia. We describe a patient with opioid intolerance scheduled for breast surgery who received an erector spinae plane block with liposomal bupivacaine as well as a supplemental T1 paravertebral block resulting in profound analgesia throughout her postoperative course. This case report demonstrates that use of liposomal bupivacaine in the erector spinae plane block can be successful in providing extended duration postoperative analgesia and minimizing systemic opioid requirements.

Memory hierarchy using row-based compression

DOEpatents

Loh, Gabriel H.; O'Connor, James M.

2016-10-25

A system includes a first memory and a device coupleable to the first memory. The device includes a second memory to cache data from the first memory. The second memory includes a plurality of rows, each row including a corresponding set of compressed data blocks of non-uniform sizes and a corresponding set of tag blocks. Each tag block represents a corresponding compressed data block of the row. The device further includes decompression logic to decompress data blocks accessed from the second memory. The device further includes compression logic to compress data blocks to be stored in the second memory.

Introgression of a Block of Genome Under Infinitesimal Selection.

PubMed

Sachdeva, Himani; Barton, Nicholas H

2018-06-12

Adaptive introgression is common in nature and can be driven by selection acting on multiple, linked genes. We explore the effects of polygenic selection on introgression under the infinitesimal model with linkage. This model assumes that the introgressing block has an effectively infinite number of loci, each with an infinitesimal effect on the trait under selection. The block is assumed to introgress under directional selection within a native population that is genetically homogeneous. We use individual-based simulations and a branching process approximation to compute various statistics of the introgressing block, and explore how these depend on parameters such as the map length and initial trait value associated with the introgressing block, the genetic variability along the block, and the strength of selection. Our results show that the introgression dynamics of a block under infinitesimal selection are qualitatively different from the dynamics of neutral introgression. We also find that in the long run, surviving descendant blocks are likely to have intermediate lengths, and clarify how their length is shaped by the interplay between linkage and infinitesimal selection. Our results suggest that it may be difficult to distinguish the long-term introgression of a block of genome with a single strongly selected locus from the introgression of a block with multiple, tightly linked and weakly selected loci. Copyright © 2018, Genetics.

Application of interconnected porous hydroxyapatite ceramic block for onlay block bone grafting in implant treatment: A case report.

PubMed

Ohta, Kouji; Tada, Misato; Ninomiya, Yoshiaki; Kato, Hiroki; Ishida, Fumi; Abekura, Hitoshi; Tsuga, Kazuhiro; Takechi, Masaaki

2017-12-01

Autogenous block bone grafting as treatment for alveolar ridge atrophy has various disadvantages, including a limited availability of sufficiently sized and shaped grafts, donor site morbidity and resorption of the grafted bone. As a result, interconnected porous hydroxyapatite ceramic (IP-CHA) materials with high porosity have been developed and used successfully in orthopedic cases. To the best of the author's knowledge, this is the first report of clinical application of an IP-CHA block for onlay grafting for implant treatment in a patient with horizontal alveolar atrophy. The present study performed onlay block grafting using an IP-CHA block to restore bone volume for implant placement in the alveolar ridge area without collecting autogenous bone. Dental X-ray findings revealed that the border of the IP-CHA block became increasingly vague over the 3-year period, whereas CT scanning revealed that the gap between the block and bone had a smooth transition, indicating that IP-CHA improved the process of integration with host bone. In follow-up examinations over a period of 5 years, the implants and superstructures had no problems. An IP-CHA block may be useful as a substitute for onlay block bone grafting in implant treatment.

Second-degree atrioventricular block.

PubMed

Zipes, D P

1979-09-01

1) While it is possible only one type of second-degree AV block exists electrophysiologically, the available data do not justify such a conclusion and it would seem more appropriate to remain a "splitter," and advocate separation and definition of multiple mechanisms, than to be a "lumper," and embrace a unitary concept. 2) The clinical classification of type I and type II AV block, based on present scalar electrocardiographic criteria, for the most part accurately differentiates clinically important categories of patients. Such a classification is descriptive, but serves a useful function and should be preserved, taking into account the caveats mentioned above. The site of block generally determines the clinical course for the patient. For most examples of AV block, the type I and type II classification in present use is based on the site of block. Because block in the His-Purkinje system is preceded by small or nonmeasurable increments, it is called type II AV block; but the very fact that it is preceded by small increments is because it occurs in the His-Purkinje system. Similar logic can be applied to type I AV block in the AV node. Exceptions do occur. If the site of AV block cannot be distinguished with certainity from the scalar ECG, an electrophysiologic study will generally reveal the answer.

Access block in NSW hospitals, 1999-2001: does the definition matter?

PubMed

Forero, Roberto; Mohsin, Mohammed; Bauman, Adrian E; Ieraci, Sue; Young, Lis; Phung, Hai N; Hillman, Kenneth M; McCarthy, Sally M; Hugelmeyer, C David

2004-01-19

To estimate the magnitude of access block and its trend over time in New South Wales hospitals, using different definitions of access block, and to explore its association with clinical and non-clinical factors. An epidemiological study using the Emergency Department Information System datasets (1 January 1999 to 31 December 2001) from a sample of 55 NSW hospitals. Prevalence of access block measured by four different definitions; strength of association between access block, type of hospital, year of presentation, mode and time of arrival, triage category (an indicator of urgency), age and sex. Rates of access block (for all four definitions) increased between 1999 and 2001 by 1%-2% per year. There were increases across all regions of NSW, but urban regions in particular. Patients presenting to Principal Referral hospitals and those who arrived at night were more likely to experience access block. After adjusting for triage category and year of presentation, the mode of arrival, time of arrival, type of hospital, age and sex were significantly associated with access block. Access block continues to increase across NSW, whatever the definition used. We recommend that hospitals in NSW and Australia move to the use of one standard definition of access block, as our study suggests there is no significant additional information emerging from the use of multiple definitions.

Ultrasound Guided Transversus Thoracic Plane block, Parasternal block and fascial planes hydrodissection for internal mammary post thoracotomy pain syndrome.

PubMed

Piraccini, E; Biondi, G; Byrne, H; Calli, M; Bellantonio, D; Musetti, G; Maitan, S

2018-05-16

Pectoral Nerves Block (PECS) and Serratus Plane Block (SPB) have been used to treat persistent post-surgical pain after breast and thoracic surgery; however, they cannot block the internal mammary region, so a residual pain may occur in that region. Parasternal block (PSB) and Thoracic Transversus Plane Block (TTP) anaesthetize the anterior branches of T2-6 intercostal nerves thus they can provide analgesia to the internal mammary region. We describe a 60-year-old man suffering from right post-thoracotomy pain syndrome with residual pain located in the internal mammary region after a successful treatment with PECS and SPB. We performed a PSB and TTP and hydrodissection of fascial planes with triamcinolone and Ropivacaine. Pain disappeared and the result was maintained 3 months later. This report suggests that PSB and TTP with local anaesthetic and corticosteroid with hydrodissection of fascial planes might be useful to treat a post thoracotomy pain syndrome located in the internal mammary region. The use of Transversus Thoracic Plane and Parasternal Blocks and fascial planes hydrodissection as a novel therapeutic approach to treat a residual post thoracotomy pain syndrome even when already treated with Pectoral Nerves Block and Serratus Plane Block. © 2018 European Pain Federation - EFIC®.

Hierarchical Nanostructures Self-Assembled from a Mixture System Containing Rod-Coil Block Copolymers and Rigid Homopolymers

PubMed Central

Li, Yongliang; Jiang, Tao; Lin, Shaoliang; Lin, Jiaping; Cai, Chunhua; Zhu, Xingyu

2015-01-01

Self-assembly behavior of a mixture system containing rod-coil block copolymers and rigid homopolymers was investigated by using Brownian dynamics simulations. The morphologies of formed hierarchical self-assemblies were found to be dependent on the Lennard-Jones (LJ) interaction εRR between rod blocks, lengths of rod and coil blocks in copolymer, and mixture ratio of block copolymers to homopolymers. As the εRR value decreases, the self-assembled structures of mixtures are transformed from an abacus-like structure to a helical structure, to a plain fiber, and finally are broken into unimers. The order parameter of rod blocks was calculated to confirm the structure transition. Through varying the length of rod and coil blocks, the regions of thermodynamic stability of abacus, helix, plain fiber, and unimers were mapped. Moreover, it was discovered that two levels of rod block ordering exist in the helices. The block copolymers are helically wrapped on the homopolymer bundles to form helical string, while the rod blocks are twistingly packed inside the string. In addition, the simulation results are in good agreement with experimental observations. The present work reveals the mechanism behind the formation of helical (experimentally super-helical) structures and may provide useful information for design and preparation of the complex structures. PMID:25965726

Block of Brain Sodium Channels by Peptide Mimetics of the Isoleucine, Phenylalanine, and Methionine (IFM) Motif from the Inactivation Gate

PubMed Central

Eaholtz, Galen; Colvin, Anita; Leonard, Daniele; Taylor, Charles; Catterall, William A.

1999-01-01

Inactivation of sodium channels is thought to be mediated by an inactivation gate formed by the intracellular loop connecting domains III and IV. A hydrophobic motif containing the amino acid sequence isoleucine, phenylalanine, and methionine (IFM) is required for the inactivation process. Peptides containing the IFM motif, when applied to the cytoplasmic side of these channels, produce two types of block: fast block, which resembles the inactivation process, and slow, use-dependent block stimulated by strong depolarizing pulses. Fast block by the peptide ac-KIFMK-NH2, measured on sodium channels whose inactivation was slowed by the α-scorpion toxin from Leiurus quinquestriatus (LqTx), was reversed with a time constant of 0.9 ms upon repolarization. In contrast, control and LqTx-modified sodium channels were slower to recover from use-dependent block. For fast block, linear peptides of three to six amino acid residues containing the IFM motif and two positive charges were more effective than peptides with one positive charge, whereas uncharged IFM peptides were ineffective. Substitution of the IFM residues in the peptide ac-KIFMK-NH2 with smaller, less hydrophobic residues prevented fast block. The positively charged tripeptide IFM-NH2 did not cause appreciable fast block, but the divalent cation IFM-NH(CH2)2NH2 was as effective as the pentapeptide ac-KIFMK-NH2. The constrained peptide cyclic KIFMK containing two positive charges did not cause fast block. These results indicate that the position of the positive charges is unimportant, but flexibility or conformation of the IFM-containing peptide is important to allow fast block. Slow, use-dependent block was observed with IFM-containing peptides of three to six residues having one or two positive charges, but not with dipeptides or phenylalanine-amide. In contrast to its lack of fast block, cyclic KIFMK was an effective use-dependent blocker. Substitutions of amino acid residues in the tripeptide IFM-NH2 showed that large hydrophobic residues are preferred in all three positions for slow, use-dependent block. However, substitution of the large hydrophobic residue diphenylalanine or the constrained residues phenylglycine or tetrahydroisoquinoline for phe decreased potency, suggesting that this phe residue must be able to enter a restricted hydrophobic pocket during the binding of IFM peptides. Together, the results on fast block and slow, use-dependent block indicate that IFM peptides form two distinct complexes of different stability and structural specificity with receptor site(s) on the sodium channel. It is proposed that fast block represents binding of these peptides to the inactivation gate receptor, while slow, use-dependent block represents deeper binding of the IFM peptides in the pore. PMID:9925825

Evaluating small-body landing hazards due to blocks

NASA Astrophysics Data System (ADS)

Ernst, C.; Rodgers, D.; Barnouin, O.; Murchie, S.; Chabot, N.

2014-07-01

Introduction: Landed missions represent a vital stage of spacecraft exploration of planetary bodies. Landed science allows for a wide variety of measurements essential to unraveling the origin and evolution of a body that are not possible remotely, including but not limited to compositional measurements, microscopic grain characterization, and the physical properties of the regolith. To date, two spacecraft have performed soft landings on the surface of a small body. In 2001, the Near Earth Asteroid Rendezvous (NEAR) mission performed a controlled descent and landing on (433) Eros following the completion of its mission [1]; in 2005, the Hayabusa spacecraft performed two touch-and-go maneuvers at (25143) Itokawa [2]. Both landings were preceded by rendezvous spacecraft reconnaissance, which enabled selection of a safe landing site. Three current missions have plans to land on small bodies (Rosetta, Hayabusa 2, and OSIRIS-REx); several other mission concepts also include small-body landings. Small-body landers need to land at sites having slopes and block abundances within spacecraft design limits. Due to the small scale of the potential hazards, it can be difficult or impossible to fully characterize a landing surface before the arrival of the spacecraft at the body. Although a rendezvous mission phase can provide global reconnaissance from which a landing site can be chosen, reasonable a priori assurance that a safe landing site exists is needed to validate the design approach for the spacecraft. Method: Many robotic spacecraft have landed safely on the Moon and Mars. Images of these landing sites, as well as more recent, extremely high-resolution orbital datasets, have enabled the comparison of orbital block observations to the smaller blocks that pose hazards to landers. Analyses of the Surveyor [3], Viking 1 and 2, Mars Pathfinder, Phoenix, Spirit, Opportunity, and Curiosity landing sites [4--8] have indicated that for a reasonable difference in size (a factor of several to ten), the size-frequency distribution of blocks can be modeled, allowing extrapolation from large block distributions to estimate small block densities. From that estimate, the probability of a lander encountering hazardous blocks can be calculated for a given lander design. Such calculations are used routinely to vet candidate sites for Mars landers [5--8]. Application to Small Bodies: To determine whether a similar approach will work for small bodies, we must determine if the large and small block populations can be linked. To do so, we analyze the comprehensive block datasets for the intermediate-sized Eros [9,10] and the small Itokawa [11,12]. Global and local block size-frequency distributions for Eros and Itokawa have power-law slopes on the order of -3 and match reasonably well between larger block sizes (from lower-resolution images) and smaller block sizes (from higher-resolution images). Although absolute block densities differ regionally on each asteroid, the slopes match reasonably well between Itokawa and Eros, with the geologic implications of this result discussed in [10]. For Eros and Itokawa, the approach of extending the size-frequency distribution from large, tens-of-meter-sized blocks down to small, tens-of-centimeter-sized blocks using a power-law fit to the large population yields reasonable estimates of small block populations. It is important to note that geologic context matters for the absolute block density --- if the global counts include multiple geologic settings, they will not directly extend to local areas containing only one setting [10]. A small number of high-resolution images of Phobos are sufficient for measuring blocks. These images are concentrated in the area outside of Stickney crater, which is thought to be the source of most of the observed blocks [13]. Block counts by Thomas et al. [13] suggest a power-law slope similar to those of Eros [9] and Itokawa global counts, with the absolute density of blocks similar to that of global Eros. Because blocks tend to be more numerous proximal to large, young craters (e.g., Stickney on Phobos, Shoemaker on Eros), the block density across most of Phobos is likely to be lower than that observed in the available high-resolution images. We suggest that a power-law extrapolation of Eros or Phobos large-block distributions provides upper limits for assessing the block landing hazards faced by a Phobos lander.

FLOWCHART; a computer program for plotting flowcharts

USGS Publications Warehouse

Bender, Bernice

1982-01-01

The computer program FLOWCHART can be used to very quickly and easily produce flowcharts of high quality for publication. FLOWCHART centers each element or block of text that it processes on one of a set of (imaginary) vertical lines. It can enclose a text block in a rectangle, circle or other selected figure. It can draw a 'line connecting the midpoint of any side of any figure with the midpoint of any side of any other figure and insert an arrow pointing in the direction of flow. It can write 'yes' or 'no' next to the line joining two figures. FLOWCHART creates flowcharts using some basic plotting subroutine* which permit plots to be generated interactively and inspected on a Tektronix compatible graphics screen or plotted in a deferred mode on a Houston Instruments 42' pen plotter. The size of the plot, character set and character height in inches are inputs to the program. Plots generated using the pen plotter can be up to 42' high--the larger size plots being directly usable as visual aids in a talk. FLOWCHART centers each block of text on an imaginary column line. (The number of columns and column width are specified as input.) The midpoint of the longest line of text within the block is defined to be the center of the block and is placed on the column line. The spacing of individual words within the block is not altered when the block is positioned. The program writes the first block of text in a designated column and continues placing each subsequent block below the previous block in the same column. A block of text may be placed in a different column by specifying the number of the column and an earlier block of text with which the new block is to be aligned. If block zero is given as the earlier block, the new text is placed in the new column continuing down the page below the previous block. Optionally a column and number of inches from the top of the page may be given for positioning the next block of text. The program will normally draw one of five types of figure to enclose a block of text: a rectangle, circle, diamond, eight sided figure or figure with parallel sides and rounded ends. It can connect the figure with a line to the preceding figure, and place an arrow pointing toward the second figure. Text blocks not in sequence can also be connected and 'yes' or 'no' written next to any line to indicate branching. Figure 1 illustrates the various types of figures that can be drawn, spacings, connecting lines and the like. * The plotting package employed is Buplot available on the VAX and PDP-1170 computers at the USGS Office of Earthquake Studies, Golden, Colo. Calls to the plotting subroutines must be adjusted if some other plotting package is used.

Preservation of within-compound associations after blocked preexposure to two compound flavors.

PubMed

Espinet, Alfredo; Caramés, José M; Cabo, Fernando

2015-11-01

Three experiments investigated the extinction of the within-compound A↔X association established when two compound flavors, AX and BX, are preexposed in blocks (i.e., AX, AX, AX, ... BX, BX, BX). In Experiment 1, a group of rats received preexposure to a block of AX trials followed by a second block of BX trials (AX-BX), while a second group received blocked preexposure to the same stimuli in the opposite order (BX-AX). Subsequently, flavor A was paired with lithium chloride. This conditioning resulted in a similar reduction of consumption of flavor X in both groups. In Experiment 2 four groups of rats received blocked preexposure to AX-BX, AX-B, A-BX, or A-X. After aversive conditioning of X, consumption of A and B was significantly lower for the groups which received these flavors paired with X than for the groups for which these flavors were presented isolated. In Experiment 3 a group of rats was preexposed to a block of SaltX presentations followed by a block of BX presentations (SaltX-BX), and a second group received blocked preexposure to (BX-SaltX). After subsequent sodium depletion, consumption of X was high and similar for the SaltX-BX and for the BX-SaltX groups. These results indicate that the within-compound association established in the first block of a blocked preexposure is not extinguished when the preexposure phase is concluded. Copyright © 2015 Elsevier B.V. All rights reserved.

Microplate model for the present-day deformation of Tibet

USGS Publications Warehouse

Thatcher, W.

2007-01-01

Site velocities from 349 Global Positioning System (GPS) stations are used to construct an 11-element quasi-rigid block model of the Tibetan Plateau and its surroundings. Rigid rotations of five major blocks are well determined, and average translation velocities of six smaller blocks can be constrained. Where data are well distributed the velocity field can be explained well by rigid block motion and fault slip across block boundaries. Residual misfits average 1.6 mm/yr compared to typical one standard deviation velocity uncertainties of 1.3 mm/yr. Any residual internal straining of the blocks is small and heterogeneous. However, residual substructure might well represent currently unresolved motions of smaller blocks. Although any smaller blocks must move at nearly the same rate as the larger blocks within which they lie, undetected relative motions between them could be significant, particularly where there are gaps in GPS coverage. Predicted relative motions between major blocks agree with the observed sense of slip and along-strike partitioning of motion across major faults. However, predicted slip rates across Tibet's major strike-slip faults are low, only 5-12 mm/yr, a factor of 2-3 smaller than most rates estimated from fault offset features dated by radiometric methods as ???2000 to ???100,000 year old. Previous work has suggested that both GPS data and low fault slip rates are incompatible with rigid block motions of Tibet. The results reported here overcome these objections.

Utility of Cytospin and Cell block Technology in Evaluation of Body Fluids and Urine Samples: A Comparative Study.

PubMed

Qamar, Irmeen; Rehman, Suhailur; Mehdi, Ghazala; Maheshwari, Veena; Ansari, Hena A; Chauhan, Sunanda

2018-01-01

Cytologic examination of body fluids commonly involves the use of direct or sediment smears, cytocentrifuge preparations, membrane filter preparations, or cell block sections. Cytospin and cell block techniques are extremely useful in improving cell yield of thin serous effusions and urine samples, and ensure high diagnostic efficacy. We studied cytospin preparations and cell block sections prepared from 180 samples of body fluids and urine samples to compare the relative efficiency of cell retrieval, preservation of cell morphology, ease of application of special stains, and diagnostic efficacy. Samples were collected and processed to prepare cytospin smears and cell block sections. We observed that overall, cell yield and preservation of individual cell morphology were better in cytospin preparations as compared to cell blocks, while preservation of architectural pattern was better in cell block sections. The number of suspicious cases also decreased on cell block sections, with increased detection of malignancy. It was difficult to prepare cell blocks from urine samples due to low cellularity. Cytospin technology is a quick, efficient, and cost-effective method of increasing cell yield in hypocellular samples, with better preservation of cell morphology. Cell blocks are better prepared from high cellularity fluids; however, tissue architecture is better studied, with improved rate of diagnosis and decrease in ambiguous results. Numerous sections can be prepared from a small amount of material. Special stains and immunochemical stains can be easily applied to cell blocks. It also provides a source of archival material.

Newer regional analgesia interventions (fascial plane blocks) for breast surgeries: Review of literature.

PubMed

Garg, Rakesh; Bhan, Swati; Vig, Saurabh

2018-04-01

Surgical resection of the primary tumour with axillary dissection is one of the main modalities of breast cancer treatment. Regional blocks have been considered as one of the modalities for effective perioperative pain control. With the advent of ultrasound, newer interventions such as fascial plane blocks have been reported for perioperative analgesia in breast surgeries. Our aim is to review the literature for fascial plane blocks for analgesia in breast surgeries. The research question for initiating the review was 'What are the reported newer regional anaesthesia techniques (fascial plane blocks) for female patients undergoing breast surgery and their analgesic efficacy?.' The participants, intervention, comparisons, outcomes and study design were followed. Due to the paucity of similar studies and heterogeneity, the assessment of bias, systematic review or pooled analysis/meta-analysis was not feasible. Of the 989 manuscripts, the present review included 28 manuscripts inclusive of all types of published manuscripts. 15 manuscripts directly related to the administration of fascial plane blocks for breast surgery across all type of study designs and cases were reviewed for the utility of fascial plane blocks in breast surgeries. Interfascial blocks score over regional anaesthetic techniques such as paravertebral block as they have no risk of sympathetic blockade, intrathecal or epidural spread which may lead to haemodynamic instability and prolonged hospital stay. This review observed that no block effectively covers the whole of breast and axilla, thus a combination of blocks should be used depending on the site of incision and extent of surgical resection.

Strong effects of predation by fishes on an invasive macroinvertebrate in a large floodplain river

USGS Publications Warehouse

Bartsch, M.R.; Bartsch, L.A.; Gutreuter, S.

2005-01-01

We assessed the effects of fish predation on zebra mussels (Dreissena polymorpha) in Navigation Pool 8 of the Upper Mississippi River from 13 May to 5 October, 1998. Concrete-block samplers were deployed at 18 randomly chosen sites in the main-channel border, with 6 sites in the upper, middle, and lower segments of the pool. Two blocks, 1 of which was enclosed in a cage to exclude large predatory fishes, were deployed at each site. After 145 d, blocks were retrieved from 12 of the 18 sites, and zebra mussels were found on all blocks. Densities of zebra mussels were higher on caged blocks than uncaged blocks, and the magnitudes of the differences varied spatially. Mean mussel densities on uncaged blocks were reduced by 66%, 86%, and 20% compared to caged blocks in the upper, middle, and lower pool segments, respectively, over the 145-d interval. Mean daily instantaneous zebra mussel mortality rates from large predators ranged from 0.0016 to 0.0138. Similarly, biomass of zebra mussels was higher on caged than uncaged blocks. Mean mussel biomass on uncaged blocks was reduced by 64% pool-wide, relative to biomass on caged blocks. Zebra mussels were consumed by at least 6 fish taxa including redhorse stickers (Moxostoma spp.), common carp (Cyprinus carpio), bluegill (Lepomis macrochirus), quillback carpsucker (Carpiodes cyprinus), flathead catfish (Pylodictis olivaris), and freshwater drum (Aplodinotus grunniens). Fish predation had an important moderating effect on zebra mussel demography in Pool 8.

33 CFR 80.150 - Block Island, RI.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Block Island, RI. 80.150 Section... NAVIGATION RULES COLREGS DEMARCATION LINES Atlantic Coast § 80.150 Block Island, RI. The 72 COLREGS shall apply on the harbors of Block Island. ...

Organic photovoltaic cell incorporating electron conducting exciton blocking layers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Forrest, Stephen R.; Lassiter, Brian E.

2014-08-26

The present disclosure relates to photosensitive optoelectronic devices including a compound blocking layer located between an acceptor material and a cathode, the compound blocking layer including: at least one electron conducting material, and at least one wide-gap electron conducting exciton blocking layer. For example, 3,4,9,10 perylenetetracarboxylic bisbenzimidazole (PTCBI) and 1,4,5,8-napthalene-tetracarboxylic-dianhydride (NTCDA) function as electron conducting and exciton blocking layers when interposed between the acceptor layer and cathode. Both materials serve as efficient electron conductors, leading to a fill factor as high as 0.70. By using an NTCDA/PTCBI compound blocking layer structure increased power conversion efficiency is achieved, compared to anmore » analogous device using a conventional blocking layers shown to conduct electrons via damage-induced midgap states.« less

Application of Sensor Technology for the Efficient Positioningand Assembling of Ship Blocks

NASA Astrophysics Data System (ADS)

Lee, Sangdon; SeongbaeEun; Jung, Jai Jin; Song, Hacheol

2010-09-01

This paper proposes the application of sensor technology to assemble ship blocks efficiently. A sensor-based monitoring system is designed and implemented to improve shipbuilding productivity by reducing the labor cost for the adjustment of adequate positioning between ship blocks during pre-erection or erection stage. For the real-time remote monitoring of relative distances between two ship blocks, sensor nodes are applied to measure the distances between corresponding target points on the blocks. Highly precise positioning data can be transferred to a monitoring server via wireless network, and analyzed to support the decision making which needs to determine the next construction process; further adjustment or seam welding between the ship blocks. The developed system is expected to put to practical use, and increase the productivity during ship blocks assembly.

A study of the tolerance block approach to special stratification. [winter wheat in Kansas

NASA Technical Reports Server (NTRS)

Richardson, W. (Principal Investigator)

1979-01-01

The author has identified the following significant results. Twelve winter wheat LACIE segments in Kansas were used to compare the performance of three clustering methods: (1) BCLUST, which uses a spectral distance function to accumulate clusters; (2) blocks-alone, which divides spectral space into equally populated blocks; and (3) block-seeds, which uses spectral means of blocks-alone as seeds for accumulating distance-type clusters. Both BCLUST and block-seeds performed equally well and outperformed blocks-alone significantly. Their average variance ratio of about 0.5 showed imperfect separation of wheat from non-wheat. This result points to the need to explore the achievable crop separability in the spectral/temporal domain, and suggest evaluating derived features rather than data channels as a means to achieve purer spectral strata.

Improved ultrasonic standard reference blocks

NASA Technical Reports Server (NTRS)

Eitzen, D. G.; Sushinsky, G. F.; Chwirut, D. J.; Bechtoldt, C. J.; Ruff, A. W.

1976-01-01

A program to improve the quality, reproducibility and reliability of nondestructive testing through the development of improved ASTM-type ultrasonic reference standards is described. Reference blocks of aluminum, steel, and titanium alloys are to be considered. Equipment representing the state-of-the-art in laboratory and field ultrasonic equipment was obtained and evaluated. RF and spectral data on ten sets of ultrasonic reference blocks have been taken as part of a task to quantify the variability in response from nominally identical blocks. Techniques for residual stress, preferred orientation, and micro-structural measurements were refined and are applied to a reference block rejected by the manufacturer during fabrication in order to evaluate the effect of metallurgical condition on block response. New fabrication techniques for reference blocks are discussed and ASTM activities are summarized.

[Effectiveness of Sacral Intervertebral Epidural Block for Umbilical Hernia Repair in Children].

PubMed

Nagamine, Norimitsu; Furuya, Atsushi; Suzuki, Sho; Kondo, Satoko; Kiuchi, Riko; Suzuki, Satomi; Nonaka, Akihiko

2015-02-01

Effectiveness of sacral intervertebral epidural block (S 2-3 block) for umbilical hernia repair has not been clarified. We investigate 24 children, undergoing umbilical hernia repair; mean age of 3 years (age range: 20-65 months). Under general anesthesia, epidural block was performed at S 2-3 interspace with 1 ml x kg(-1) ropivacaine (0.2%) at injecting rate of 1 ml x sec(-1) followed by 0.25 ml x kg(-1) normal saline. In all cases, neither systolic blood pressure nor heart rate increased > 15% from those just before the block. Postoperative analgesics were given in 6 patients (25%) rectally. Mean time between the block and the administration of analgesic was 10.5 hours. S 2-3 block can be effective for postoperative pain in umbilical hernia repair.

An electrostatic Particle-In-Cell code on multi-block structured meshes

NASA Astrophysics Data System (ADS)

Meierbachtol, Collin S.; Svyatskiy, Daniil; Delzanno, Gian Luca; Vernon, Louis J.; Moulton, J. David

2017-12-01

We present an electrostatic Particle-In-Cell (PIC) code on multi-block, locally structured, curvilinear meshes called Curvilinear PIC (CPIC). Multi-block meshes are essential to capture complex geometries accurately and with good mesh quality, something that would not be possible with single-block structured meshes that are often used in PIC and for which CPIC was initially developed. Despite the structured nature of the individual blocks, multi-block meshes resemble unstructured meshes in a global sense and introduce several new challenges, such as the presence of discontinuities in the mesh properties and coordinate orientation changes across adjacent blocks, and polyjunction points where an arbitrary number of blocks meet. In CPIC, these challenges have been met by an approach that features: (1) a curvilinear formulation of the PIC method: each mesh block is mapped from the physical space, where the mesh is curvilinear and arbitrarily distorted, to the logical space, where the mesh is uniform and Cartesian on the unit cube; (2) a mimetic discretization of Poisson's equation suitable for multi-block meshes; and (3) a hybrid (logical-space position/physical-space velocity), asynchronous particle mover that mitigates the performance degradation created by the necessity to track particles as they move across blocks. The numerical accuracy of CPIC was verified using two standard plasma-material interaction tests, which demonstrate good agreement with the corresponding analytic solutions. Compared to PIC codes on unstructured meshes, which have also been used for their flexibility in handling complex geometries but whose performance suffers from issues associated with data locality and indirect data access patterns, PIC codes on multi-block structured meshes may offer the best compromise for capturing complex geometries while also maintaining solution accuracy and computational efficiency.

Hashimoto's thyroiditis with heterogeneous antithyrotropin receptor antibodies: unique epitopes may contribute to the regulation of thyroid function by the antibodies.

PubMed

Akamizu, T; Kohn, L D; Hiratani, H; Saijo, M; Tahara, K; Nakao, K

2000-06-01

Blocking-type TSH-binding inhibitor Igs (TBIIs) are known to cause hypothyroidism and an atrophic thyroid gland in patients with primary myxedema. They can block the activity of thyroid-stimulating antibodies (TSAbs) in Graves' patients as well as the activity of TSH. The majority of the epitopes for these blocking-type TBIIs have been, and are shown herein, to be present on the C-terminal region of the extracellular domain of the human TSH receptor (TSHR), whereas those for Graves' TSAbs are on the N-terminus. We report on a patient with Hashimoto's thyroiditis who suffered from mild hypothyroidism and a moderately sized goiter. Her serum had a potent blocking-type TBII and a weak TSAb in human and porcine TSHR systems. Using human TSHR/lutropin-CG receptor chimeras, we determined that the functional epitope of her blocking-type TBII was uniquely present on the N-terminal, rather than the C-terminal, region of the extracellular domain of the TSHR, unlike the case for blocking-type TBIIs in primary myxedema patients. The epitope of her TSAb was also unusual. Although the functional epitopes of most TSAbs are known to involve the N-terminal region of the receptor, her TSAb epitope did not seem to be present solely on the N- or C-terminus of the extracellular domain of the receptor. Blocking-type TBIIs from patients with primary myxedema blocked her TSAb activity as well as stimulation by TSH; her blocking-type TBII was able to only partially block her TSAb. In contrast, her blocking-type TBII almost completely blocked TSAbs from Graves' patients. Thus, we suggest that the unique epitopes of this patient's heterogeneous population of TSH receptor antibodies, at least in part, contribute to regulation of her thyroid function.

Effectiveness of Stellate Ganglion Block Under Fuoroscopy or Ultrasound Guidance in Upper Extremity CRPS.

PubMed

Imani, Farnad; Hemati, Karim; Rahimzadeh, Poupak; Kazemi, Mohamad Reza; Hejazian, Kokab

2016-01-01

Stellate Ganglion Block (SGB) is an effective technique which may be used to manage upper extremities pain due to Chronic Regional Pain Syndrome (CRPS), in this study we tried to evaluate the effectiveness of this procedure under two different guidance for management of this syndrome. The purpose of this study was to evaluate the effectiveness of ultrsound guide SGB by comparing it with the furoscopy guided SGB in upper extermities CRPS patients in reducing pain & dysfuction of the affected link. Fourteen patients with sympathetic CRPS in upper extremities in a randomized method with block randomization divided in two equal groups (with ultrasound or fluoroscopic guidance). First group was blocked under fluoroscopic guidance and second group blocked under ultrasound guidance. After correct positioning of the needle, a mixture of 5 ml bupivacaine 0.25% and 1 mL of triamcinolone was injected. These data represent no meaningful statistical difference between the two groups in terms of the number of pain attacks before the blocks, a borderline correlation between two groups one week and one month after the block and a significant statistical correlation between two groups three month after the block. These data represent no meaningful statistical difference between the patients of any group in terms of the pain intensity (from one week to six months after block), p-value = 0.61. These data represent a meaningful statistical difference among patients of any group and between the two groups in terms of the pain intensity (before the block until six months after block), p-values were 0.001, 0.031 respectively. According the above mentioned data, in comparison with fluoroscopic guidance, stellate ganglion block under ultrasound guidance is a safe and effective method with lower complication and better improvement in patient's disability indexes.

A comparison between caudal block versus splash block for postoperative analgesia following inguinal herniorrhaphy in children

PubMed Central

Cheon, Jun Kong; Hwang, Kan Taeck; Choi, Bo Yoon

2011-01-01

Background We wanted to determine the postoperative analgesic efficacy of preincisional caudal epidural block versus instillation (splash block) following inguinal herniorrhaphy in children. Methods Thirty children (age range: 1-7 years) who were scheduled to undergo inguinal herniorrhaphy were divided into 2 groups: the caudal block group and the splash block group with 15 children in each group. Tracheal intubation was performed. Fifteen children received caudal block with 1.0 ml/kg of 0.25% ropivacaine (Group 1). Caudal block was performed using the loss of resistance method via the sacral hiatus. Fifteen children in Group 2 received local instillation (splash block) in the surgical site with up to 0.4 ml/kg of 0.25% ropivacaine. The patients were observed for 90 minutes in the postanesthesia care unit and then they were transferred to the ward. The pain scores were taken 4 times. We assessed pain using the Faces pain scores. Results There were no significant differences between the groups regarding the pain scores at 10, 30 and 60 minutes upon entering the postanesthesia care unit. The pain scores of Group 1 were slightly lower at the last evaluation point when compared to that of Group 2. One patient in Group 1 required supplemental postoperative intravenous (IV) tramadol, while all the other patients in both groups did not require supplemental IV tramadol. The intraoperative requirement for sevoflurane was decreased in Group 1 as compared to that of Group 2. There were no major complications related to either type of block. Conclusions We conclude that a splash block can have a similar analgesic effect as that of a caudal block for the postoperative herniorrhaphy pain of children. PMID:21602975

A comparison between caudal block versus splash block for postoperative analgesia following inguinal herniorrhaphy in children.

PubMed

Cheon, Jun Kong; Park, Cheon Hee; Hwang, Kan Taeck; Choi, Bo Yoon

2011-04-01

We wanted to determine the postoperative analgesic efficacy of preincisional caudal epidural block versus instillation (splash block) following inguinal herniorrhaphy in children. THIRTY CHILDREN (AGE RANGE: 1-7 years) who were scheduled to undergo inguinal herniorrhaphy were divided into 2 groups: the caudal block group and the splash block group with 15 children in each group. Tracheal intubation was performed. Fifteen children received caudal block with 1.0 ml/kg of 0.25% ropivacaine (Group 1). Caudal block was performed using the loss of resistance method via the sacral hiatus. Fifteen children in Group 2 received local instillation (splash block) in the surgical site with up to 0.4 ml/kg of 0.25% ropivacaine. The patients were observed for 90 minutes in the postanesthesia care unit and then they were transferred to the ward. The pain scores were taken 4 times. We assessed pain using the Faces pain scores. There were no significant differences between the groups regarding the pain scores at 10, 30 and 60 minutes upon entering the postanesthesia care unit. The pain scores of Group 1 were slightly lower at the last evaluation point when compared to that of Group 2. One patient in Group 1 required supplemental postoperative intravenous (IV) tramadol, while all the other patients in both groups did not require supplemental IV tramadol. The intraoperative requirement for sevoflurane was decreased in Group 1 as compared to that of Group 2. There were no major complications related to either type of block. We conclude that a splash block can have a similar analgesic effect as that of a caudal block for the postoperative herniorrhaphy pain of children.

Thermoablation of Liver Metastases: Efficacy of Temporary Celiac Plexus Block

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck, A.N., E-mail: alexander.beck@charite.de; Schaefer, M.; Werk, M.

Purpose. To determine the efficacy of celiac plexus block during thermoablation of liver metastases. Methods. Fifty-five consecutive patients underwent thermoablation therapy of liver tumors by laser-induced thermotherapy. Twenty-nine patients received a temporary celiac plexus block, 26 patients acted as control group. In both groups fentanyl and midazolam were administered intravenously upon request of the patient. The duration of the intervention, consumption of opiates, and individual pain sensations were documented. Results. No complications resulting from the celiac plexus block were recorded. Celiac plexus block significantly reduced the amount of pain medication used during thermoablation therapy of liver tumors (with block, 2.45more » {mu}g fentanyl per kg body weight; without block, 3.58 {mu}g fentanyl per kg body weight, p < 0.05; midazolam consumption was not reduced) in patients with metastases {<=}5 mm from the liver capsule. For metastases farther away from the capsule no significant differences in opiate consumption were seen. Celiac plexus block reduced the time for thermoablation significantly (178 min versus 147 min, p < 0.05) no matter how far the metastases were from the liver capsule. Average time needed to set the block was 12 min (range 9-15 min); additional costs for the block were marginal. As expected (as pain medications were given according to individual patients' needs) pain indices did not differ significantly between the two groups. Conclusion. In patients with liver metastases {<=}5 mm from the liver capsule, celiac plexus block reduces the amount of opiates necessary, simplifying patient monitoring. In addition celiac plexus block reduces intervention time, with positive effects on overall workflow for all patients.« less

An electrostatic Particle-In-Cell code on multi-block structured meshes

DOE PAGES

Meierbachtol, Collin S.; Svyatskiy, Daniil; Delzanno, Gian Luca; ...

2017-09-14

We present an electrostatic Particle-In-Cell (PIC) code on multi-block, locally structured, curvilinear meshes called Curvilinear PIC (CPIC). Multi-block meshes are essential to capture complex geometries accurately and with good mesh quality, something that would not be possible with single-block structured meshes that are often used in PIC and for which CPIC was initially developed. In spite of the structured nature of the individual blocks, multi-block meshes resemble unstructured meshes in a global sense and introduce several new challenges, such as the presence of discontinuities in the mesh properties and coordinate orientation changes across adjacent blocks, and polyjunction points where anmore » arbitrary number of blocks meet. In CPIC, these challenges have been met by an approach that features: (1) a curvilinear formulation of the PIC method: each mesh block is mapped from the physical space, where the mesh is curvilinear and arbitrarily distorted, to the logical space, where the mesh is uniform and Cartesian on the unit cube; (2) a mimetic discretization of Poisson's equation suitable for multi-block meshes; and (3) a hybrid (logical-space position/physical-space velocity), asynchronous particle mover that mitigates the performance degradation created by the necessity to track particles as they move across blocks. The numerical accuracy of CPIC was verified using two standard plasma–material interaction tests, which demonstrate good agreement with the corresponding analytic solutions. And compared to PIC codes on unstructured meshes, which have also been used for their flexibility in handling complex geometries but whose performance suffers from issues associated with data locality and indirect data access patterns, PIC codes on multi-block structured meshes may offer the best compromise for capturing complex geometries while also maintaining solution accuracy and computational efficiency.« less

A Lower-Cost High-Resolution LYSO Detector Development for Positron Emission Mammography (PEM)

PubMed Central

Ramirez, Rocio A.; Zhang, Yuxuan; Liu, Shitao; Li, Hongdi; Baghaei, Hossain; An, Shaohui; Wang, Chao; Jan, Meei-Ling; Wong, Wai-Hoi

2010-01-01

In photomultiplier-quadrant-sharing (PQS) geometry for positron emission tomography applications, each PMT is shared by four blocks and each detector block is optically coupled to four round PMTs. Although this design reduces the cost of high-resolution PET systems, when the camera consists of detector panels that are made up of square blocks, half of the PMT’s sensitive window remains unused at the detector panel edge. Our goal was to develop a LYSO detector panel which minimizes the unused portion of the PMTs for a low-cost, high-resolution, and high-sensitivity positron emission mammography (PEM) camera. We modified the PQS design by using elongated blocks at panel edges and square blocks in the inner area. For elongated blocks, symmetric and asymmetrical reflector patterns were developed and PQS and PMT-half-sharing (PHS) arrangements were implemented in order to obtain a suitable decoding. The packing fraction was 96.3% for asymmetric block and 95.5% for symmetric block. Both of the blocks have excellent decoding capability with all crystals clearly identified, 156 for asymmetric and 144 for symmetric and peak-to-valley ratio of 3.0 and 2.3 respectively. The average energy resolution was 14.2% for the asymmetric block and 13.1% for the symmetric block. Using a modified PQS geometry and asymmetric block design, we reduced the unused PMT region at detector panel edges, thereby increased the field-of-view and the overall detection sensitivity and minimized the undetected breast region near the chest wall. This detector design and using regular round PMT allowed building a lower-cost, high-resolution and high-sensitivity PEM camera. PMID:20485510

Effect of course coordinator behavior and motivation on students’ achievement: Results from five curriculum blocks of two undergraduate student cohorts at King Saud bin Abdulaziz University of Health Sciences

PubMed Central

Al-Alwan, Ibrahim; Baig, Lubna Ansari; Badri, Motasim; Magzoub, Mohi Eldin; Alyousif, Sarah

2015-01-01

Objective: The purpose of the study was to assess the relationship between students’ perception of course/block coordinators performance and attributes with students’ assessment scores in respective courses. Methods: This retrospective data based study was conducted at the College of Medicine, King Saud bin Abdulaziz University of Health Sciences (KSAU-HS). It was started in March 2013 and completed in June 2013 after the graduation of the fourth cohort. Exam score of 3rd and 4th cohort of students from the courses taught in the last two years of medical school were correlated with faculty and block evaluation done by the students. Scores from mid-block MCQs, portfolio scores, OSCEs and end-of-block MCQs were obtained. Results: The Mean scores of all the assessments for all five blocks were not significantly different for both batches. There was significant difference between block coordinators for students’ score on portfolio, midterm exam and the final written exam. The students’ Score in OSCE had significantly strong correlation with quality of station monitors, coverage of content and flow between stations. Student’s perception of the commitment and motivation of the coordinator was strongly correlated with block organization, availability of clinical cases, performance of block coordinator, cooperation with students, and organization of clinical activities. Conclusions: Block coordinator’s motivation and commitment affects quality of block organization and student`s success. Faculty training programs should include block management competencies and components identified through self-determination theory for improving the intrinsic motivation for students success. PMID:26101511

Lexical Retrieval is not by Competition: Evidence from the Blocked Naming Paradigm

PubMed Central

Navarrete, Eduardo; Del Prato, Paul; Peressotti, Francesca; Mahon, Bradford Z.

2014-01-01

A central issue in research on speech production is whether or not the retrieval of words from the mental lexicon is a competitive process. An important experimental paradigm to study the dynamics of lexical retrieval is the blocked naming paradigm, in which participants name pictures of objects that are grouped by semantic category (‘homogenous’ or ‘related’ blocks) or not grouped by semantic category (‘heterogeneous’ or ‘unrelated’ blocks). Typically, pictures are repeated multiple times (or cycles) within both related and unrelated blocks. It is known that participants are slower in related than in unrelated blocks when the data are collapsed over all within-block repetitions. This semantic interference effect, as observed in the blocked naming task, is the strongest empirical evidence for the hypothesis of lexical selection by competition. Here we show, contrary to the accepted view, that the default polarity of semantic context effects in the blocked naming paradigm is facilitation, rather than interference. In a series of experiments we find that interference arises only when items repeat within a block, and only because of that repetition: What looks to be ‘semantic interference’ in the blocked naming paradigm is actually less repetition priming in related compared to unrelated blocks. These data undermine the theory of lexical selection by competition and indicate a model in which the most highly activated word is retrieved, regardless of the activation levels of nontarget words. We conclude that the theory of lexical selection by competition, and by extension the important psycholinguistic models based on that assumption, are no longer viable, and frame a new way to approach the question of how words are retrieved in spoken language production. PMID:25284954

An electrostatic Particle-In-Cell code on multi-block structured meshes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meierbachtol, Collin S.; Svyatskiy, Daniil; Delzanno, Gian Luca

We present an electrostatic Particle-In-Cell (PIC) code on multi-block, locally structured, curvilinear meshes called Curvilinear PIC (CPIC). Multi-block meshes are essential to capture complex geometries accurately and with good mesh quality, something that would not be possible with single-block structured meshes that are often used in PIC and for which CPIC was initially developed. In spite of the structured nature of the individual blocks, multi-block meshes resemble unstructured meshes in a global sense and introduce several new challenges, such as the presence of discontinuities in the mesh properties and coordinate orientation changes across adjacent blocks, and polyjunction points where anmore » arbitrary number of blocks meet. In CPIC, these challenges have been met by an approach that features: (1) a curvilinear formulation of the PIC method: each mesh block is mapped from the physical space, where the mesh is curvilinear and arbitrarily distorted, to the logical space, where the mesh is uniform and Cartesian on the unit cube; (2) a mimetic discretization of Poisson's equation suitable for multi-block meshes; and (3) a hybrid (logical-space position/physical-space velocity), asynchronous particle mover that mitigates the performance degradation created by the necessity to track particles as they move across blocks. The numerical accuracy of CPIC was verified using two standard plasma–material interaction tests, which demonstrate good agreement with the corresponding analytic solutions. And compared to PIC codes on unstructured meshes, which have also been used for their flexibility in handling complex geometries but whose performance suffers from issues associated with data locality and indirect data access patterns, PIC codes on multi-block structured meshes may offer the best compromise for capturing complex geometries while also maintaining solution accuracy and computational efficiency.« less

Aggregate morphologies of amphiphilic ABC triblock copolymer in dilute solution using self-consistent field theory.

PubMed

Wang, Rong; Tang, Ping; Qiu, Feng; Yang, Yuliang

2005-09-15

The complex microstructures of amphiphilic ABC linear triblock copolymers in which one of the end blocks is relatively short and hydrophilic, and the other two blocks B and C are hydrophobic in a dilute solution, have been investigated by the real-space implementation of self-consistent field theory (SCFT) in two dimensions (2D). In contrast to diblock copolymers in solution, the aggregation of triblock copolymers are more complicated due to the presence of the second hydrophobic blocks and, hence, big ranges of parameter space controlling the morphology. By tailoring the hydrophobic degree and its difference between the blocks B and C, the various shapes of vesicles, circlelike and linelike micelles possibly corresponding to spherelike, and rodlike micelles in 3D, and especially, peanutlike micelles not found in diblock copolymers are observed. The transition from vesicles to circlelike micelles occurs with increasing the hydrophobicity of the blocks B and C, while the transition from circlelike micelles to linelike micelles or from the mixture of micelles and vesicles to the long linelike micelles takes place when the repulsive interaction of the end hydrophobic block C is stronger than that of the middle hydrophobic block B. Furthermore, it is favorable for dispersion of the block copolymer in the solvent into aggregates when the repulsion of the solvent to the end hydrophobic block is larger than that of the solvent to the middle hydrophobic block. Especially when the bulk block copolymers are in a weak segregation regime, the competition between the microphase separation and macrophase separation exists and the large compound micelle-like aggregates are found due to the macrophase separation with increasing the hydrophobic degree of blocks B and C, which is absent in diblock copolymer solution. The simulation results successfully reproduce the existing experimental ones.

Nano-structured polymer composites and process for preparing same

DOEpatents

Hillmyer, Marc; Chen, Liang

2013-04-16

A process for preparing a polymer composite that includes reacting (a) a multi-functional monomer and (b) a block copolymer comprising (i) a first block and (ii) a second block that includes a functional group capable of reacting with the multi-functional monomer, to form a crosslinked, nano-structured, bi-continuous composite. The composite includes a continuous matrix phase and a second continuous phase comprising the first block of the block copolymer.

Microbial Fouling and its Effect on Power Generation.

DTIC Science & Technology

1981-09-01

The tubular fouling reactor system (TFR) consists of a test block heat exchanger and a support system which includes water supply treatment facilities...and measurement instrumentation. Figure 8 is a schematic diagram of the system. Test block heat exchanger : The test block heat exchanger consists of...two adjacent aluminum cylindrical blocks (12.5 cm dia.) clamped to the section of tubing being tested (Fig. 9). The block is heated by electrical re

NUCLEAR REACTORS

DOEpatents

Long, E.; Ashby, J.W.

1958-09-16

ABS>A graphite moderator structure is presented for a nuclear reactor compriscd of an assembly of similarly orientated prismatic graphite blocks arranged on spaced longitudinal axes lying in common planes wherein the planes of the walls of the blocks are positioned so as to be twisted reintive to the planes of said axes so thatthe unlmpeded dtrect paths in direction wholly across the walls of the blocks are limited to the width of the blocks plus spacing between the blocks.

Method of producing nanopatterned articles, and articles produced thereby

DOEpatents

Russell, Thomas P; Park, Soojin; Xu, Ting

2013-11-12

A nanopatterned surface is prepared by forming a block copolymer film on a miscut crystalline substrate, annealing the block copolymer film, then reconstructing the surface of the annealed block copolymer film. The method creates a well-ordered array of voids in the block copolymer film that is maintained over a large area. The nanopatterned block copolymer films can be used ina variety of different applications, including the fabrication of high density data storage media.

A comparison of the fascia iliaca block to the lumbar plexus block in providing analgesia following arthroscopic hip surgery: A randomized controlled clinical trial.

PubMed

Badiola, Ignacio; Liu, Jiabin; Huang, Stephanie; Kelly, John D; Elkassabany, Nabil

2018-05-31

This randomized controlled single blinded clinical trial compared the fascia iliaca block (FIB) and the lumbar plexus block (LPB) in patients with moderate to severe pain following hip arthroscopic surgery. Single blinded randomized trial. Postoperative recovery area, postoperative days 0 and 1. Fifty patients undergoing hip arthroscopy were approached in the Post Anesthesia Care Unit (PACU) if they had moderate to severe pain (defined as > or equal 4/10 on the numeric rating scale). Twenty-five patients were allocated to the FIB and twenty-five patients to the LPB. Fascia iliaca block or lumbar plexus block. A blinded observer recorded pain scores just prior to the block, 15 min following the block (primary endpoint), and then every 15 min for 2 h (or until the patient was discharged). Total PACU time and opioid use were recorded. Pain scores and analgesic use on postoperative day (POD) 0, and POD 1 were recorded. At 24 h post block the Quality of Recovery 9 questionnaire was administered. The mean pre-block pain scores were comparable between the two groups (P = 0.689). There was no difference in mean post block pain scores between the two groups at 15 min (P = 0.054). In the PACU patients who underwent a LPB consumed less opioids compared to FIB patients (P = 0.02), however no differences were noted between the two groups in PACU length of stay, or POD 0 or 1 opioid use. A fascia iliaca block is not inferior to a lumbar plexus block in reducing PACU pain scores in patients with moderate to severe pain following hip arthroscopic surgery and is a viable option to help manage postoperative pain following hip arthroscopic surgery. Copyright © 2018. Published by Elsevier Inc.

Dexmedetomidine as an adjuvant to 0.5% ropivacaine in ultrasound-guided axillary brachial plexus block.

PubMed

Koraki, E; Stachtari, C; Kapsokalyvas, I; Stergiouda, Z; Katsanevaki, A; Trikoupi, A

2018-06-01

The aim of this study was to elucidate the effect of dexmedetomidine added to ropivacaine on the onset and duration of sensory and motor block and duration of analgesia of ultrasound-guided axillary brachial plexus block. Thirty-seven ASA physical status I-II patients with elective forearm and hand surgery under ultrasound-guided axillary brachial plexus block were randomly divided into 2 groups. Patients in ropivacaine-dexmedetomidine group (group RD, n = 19) received 15 mL of 0.5% ropivacaine with 100 μg (1 mL) dexmedetomidine, and patients in ropivacaine group (group R, n = 18) received 15 mL of 0.5% ropivacaine with 1 mL of normal saline. Onset time and duration of sensory and motor block and duration of analgesia were assessed. Duration of sensory block (U-value = 35, P < .001), duration of motor block (P = .001) and duration of analgesia (P < .001) were extended in group RD compared to group R. Onset time of sensory block in group RD was significantly faster than in group R (U-value = 65.5, P = .001). Onset time of motor block showed no significant difference between the 2 groups (U-value = 116.5, P = .096). Adverse reactions were reported only in group RD (bradycardia in 2 and hypotension in 3 patients). Our study indicated that dexmedetomidine 100 μg as adjuvant on ultrasound-guided axillary plexus block significantly prolonged the duration of sensory block and analgesia, as well as accelerated the time to onset of sensory block. These results should be weighed against the increased risks of motor block prolongation, transient bradycardia and hypotension and allow for attentive optimism, only if prolonged clinical trials provide a definitive answer. © 2017 John Wiley & Sons Ltd.

Strategic retrieval processing and the impact of knowing when a memory was first created.

PubMed

Roberts, J S; Tsivilis, D; Mayes, A R

2014-04-01

Retrieval orientation refers to a process where participants strategically alter how a memory cue is processed in response to different task demands. In the present study we explored whether retrieval orientation is influenced by knowing when an old stimulus was first encoded. Participants completed separate remember/know test blocks for old items from a recent delay (40min) and old items from a remote delay (48h). Manipulations at encoding ensured that performance levels were matched between these two blocks, thus avoiding confounds with differences in retrieval effort. Importantly, a third test block comprised old items from both delays randomly intermixed. As the nature of the old items varies unpredictably in the mixed block, it should not be possibly to adopt a specific retrieval orientation and the mixed block therefore acts as a control condition. Participants saw the words "mixed," "recent" or "remote" prior to each test block. Comparing ERPs from the recent and remote blocks permitted an investigation of whether participants alter their retrieval orientation in response to the specific length of the retention interval. Comparing ERPs from the pure (recent and remote) test blocks to ERPs from the mixed block permitted an investigation of whether delay information per se led to differences in retrieval strategy. Analysis of the ERP data found no differences between the recent and remote blocks. However, ERPs from these pure blocks were significantly less positive than ERPs from the mixed block from 200ms towards the end of the epoch. The findings suggest that the delay information was useful in a general sense and encouraged retrieval strategies distinct from those engaged in the mixed block. We speculate that such strategies might relate to whether or not the retrieval search is specific and constrained and/or whether processes that serve to reinstate the original encoding context are engaged. Copyright © 2014 Elsevier Inc. All rights reserved.

Grid Block Design Based on Monte Carlo Simulated Dosimetry, the Linear Quadratic and Hug–Kellerer Radiobiological Models

PubMed Central

Gholami, Somayeh; Nedaie, Hassan Ali; Longo, Francesco; Ay, Mohammad Reza; Dini, Sharifeh A.; Meigooni, Ali S.

2017-01-01

Purpose: The clinical efficacy of Grid therapy has been examined by several investigators. In this project, the hole diameter and hole spacing in Grid blocks were examined to determine the optimum parameters that give a therapeutic advantage. Methods: The evaluations were performed using Monte Carlo (MC) simulation and commonly used radiobiological models. The Geant4 MC code was used to simulate the dose distributions for 25 different Grid blocks with different hole diameters and center-to-center spacing. The therapeutic parameters of these blocks, namely, the therapeutic ratio (TR) and geometrical sparing factor (GSF) were calculated using two different radiobiological models, including the linear quadratic and Hug–Kellerer models. In addition, the ratio of the open to blocked area (ROTBA) is also used as a geometrical parameter for each block design. Comparisons of the TR, GSF, and ROTBA for all of the blocks were used to derive the parameters for an optimum Grid block with the maximum TR, minimum GSF, and optimal ROTBA. A sample of the optimum Grid block was fabricated at our institution. Dosimetric characteristics of this Grid block were measured using an ionization chamber in water phantom, Gafchromic film, and thermoluminescent dosimeters in Solid Water™ phantom materials. Results: The results of these investigations indicated that Grid blocks with hole diameters between 1.00 and 1.25 cm and spacing of 1.7 or 1.8 cm have optimal therapeutic parameters (TR > 1.3 and GSF~0.90). The measured dosimetric characteristics of the optimum Grid blocks including dose profiles, percentage depth dose, dose output factor (cGy/MU), and valley-to-peak ratio were in good agreement (±5%) with the simulated data. Conclusion: In summary, using MC-based dosimetry, two radiobiological models, and previously published clinical data, we have introduced a method to design a Grid block with optimum therapeutic response. The simulated data were reproduced by experimental data. PMID:29296035

Novel High Efficient Organic Photovoltaic Materials

NASA Technical Reports Server (NTRS)

Sun, Sam; Haliburton, James; Fan, Zben; Taft, Charles; Wang, Yi-Qing; Maaref, Shahin; Mackey, Willie R. (Technical Monitor)

2001-01-01

In man's mission to the outer space or a remote site, the most abundant, renewable, nonpolluting, and unlimited external energy source is light. Photovoltaic (PV) materials can convert light into electrical power. In order to generate appreciable electrical power in space or on the Earth, it is necessary to collect sunlight from large areas due to the low density of sunlight, and this would be very costly using current commercially available inorganic solar cells. Future organic or polymer based solar cells seemed very attractive due to several reasons. These include lightweight, flexible shape, ultra-fast optoelectronic response time (this also makes organic PV materials attractive for developing ultra-fast photo detectors), tunability of energy band-gaps via molecular design, versatile materials synthesis and device fabrication schemes, and much lower cost on large-scale industrial production. It has been predicted that nano-phase separated block copolymer systems containing electron rich donor blocks and electron deficient acceptor blocks will facilitate the charge separation and migration due to improved electronic ultrastructure and morphology in comparison to current polymer composite photovoltaic system. This presentation will describe our recent progress in the design, synthesis and characterization of a novel donor-bridge-acceptor block copolymer system for potential high-efficient organic optoelectronic applications. Specifically, the donor block contains an electron donating alkyloxy derivatized polyphenylenevinylene, the acceptor block contains an electron withdrawing alkyl-sulfone derivatized polyphenylenevinylene, and the bridge block contains an electronically neutral non-conjugated aliphatic hydrocarbon chain. The key synthetic strategy includes the synthesis of each individual block first, then couple the blocks together. While the donor block stabilizes the holes, the acceptor block stabilizes the electrons. The bridge block is designed to hinder the electron-hole recombination. Thus, improved charge separation is expected. In addition, charge migration will also be facilitated due to the expected nano-phase separated and highly ordered block copolymer ultrastructural. The combination of all these factors will result in significant overall enhancement of photovoltaic power conversion efficiency.

Geodynamic settings of microcontinents, non-volcanic islands and submerged continental marginal plateau formation

NASA Astrophysics Data System (ADS)

Dubinin, Evgeny; Grokholsky, Andrey; Makushkina, Anna

2016-04-01

Complex process of continental lithosphere breakup is often accompanied by full or semi isolation of small continental blocks from the parent continent such as microcontinents or submerged marginal plateaus. We present different types of continental blocks formed in various geodynamic settings. The process depends on thermo-mechanical properties of rifting. 1) The continental blocks fully isolated from the parent continent. This kind of blocks exist in submerged form (Elan Bank, the Jan-Mayen Ridge, Zenith Plateau, Gulden Draak Knoll, Batavia Knoll) and in non-submerged form in case of large block size. Most of listed submerged blocks are formed in proximity of hot-spot or plume. 2) The continental blocks semi-isolated from the parent continent. Exmouth Plateau, Vøring, Agulhas, Naturaliste are submerged continental plateaus of the indicated category; Sri Lanka, Tasmania, Socotra are islands adjacent to continent here. Nowadays illustration of this setting is the Sinai block located between the two continental rifts. 3) The submerged linear continental blocks formed by the continental rifting along margin (the Lomonosov Ridge). Suggested evolution of this paragraph is the rift propagation along existing transtensional (or another type) transform fault. Future example of this type might be the California Peninsula block, detached from the North American plate by the rifting within San-Andreas fault. 4) The submerged continental blocks formed by extensional processes as the result of asthenosphere flow and shear deformations. Examples are submerged blocks in the central and southern Scotia Sea (Terror Bank, Protector Basin, Discovery Bank, Bruce Bank etc.). 5) The continental blocks formed in the transform fault systems originated in setting of contradict rifts propagation in presence of structure barriers, rifts are shifted by several hundreds kilometers from each other. Examples of this geodynamic setting are Equatorial Atlantic at the initial development stage, and the transitional zone between Mohns and Gakkel Ridges. The research funded by RFBR, project № 15-05-03486.

Development and Validation of a New Air Carrier Block Time Prediction Model and Methodology

NASA Astrophysics Data System (ADS)

Litvay, Robyn Olson

Commercial airline operations rely on predicted block times as the foundation for critical, successive decisions that include fuel purchasing, crew scheduling, and airport facility usage planning. Small inaccuracies in the predicted block times have the potential to result in huge financial losses, and, with profit margins for airline operations currently almost nonexistent, potentially negate any possible profit. Although optimization techniques have resulted in many models targeting airline operations, the challenge of accurately predicting and quantifying variables months in advance remains elusive. The objective of this work is the development of an airline block time prediction model and methodology that is practical, easily implemented, and easily updated. Research was accomplished, and actual U.S., domestic, flight data from a major airline was utilized, to develop a model to predict airline block times with increased accuracy and smaller variance in the actual times from the predicted times. This reduction in variance represents tens of millions of dollars (U.S.) per year in operational cost savings for an individual airline. A new methodology for block time prediction is constructed using a regression model as the base, as it has both deterministic and probabilistic components, and historic block time distributions. The estimation of the block times for commercial, domestic, airline operations requires a probabilistic, general model that can be easily customized for a specific airline’s network. As individual block times vary by season, by day, and by time of day, the challenge is to make general, long-term estimations representing the average, actual block times while minimizing the variation. Predictions of block times for the third quarter months of July and August of 2011 were calculated using this new model. The resulting, actual block times were obtained from the Research and Innovative Technology Administration, Bureau of Transportation Statistics (Airline On-time Performance Data, 2008-2011) for comparison and analysis. Future block times are shown to be predicted with greater accuracy, without exception and network-wide, for a major, U.S., domestic airline.

Reinforcement of subarachnoid block by epidural volume effect in lower abdominal surgery: A comparison between fentanyl and tramadol for efficacy and block properties

PubMed Central

Mohan, Atiharsh; Singh, Preet Mohinder; Malviya, Deepak; Arya, Sunil Kumar; Singh, Dinesh Kumar

2012-01-01

Background: Epidural volume extension (EVE) is claimed to increase the block height and decrease the dose requirement for intrathecal drug. However, almost all studies have been done in obstetric population and none actually compares the effect of additional drugs added to epidural volume. Materials and Methods: Seventy-five (ASA I and II) patients scheduled for lower abdominal surgery were randomly divided into three groups. All groups received intrathecal 10 mg bupivacaine; two groups received additional 10 ml of normal saline epidurally with 25 mg tramadol or 25 mg of fentanyl. Groups were than compared for maximal block height, rate of sensory block regression to T10, and motor block regression to Bromage scale of 0. Time to first analgesia and adverse effects were also compared among the three groups. Materials and Methods: Seventy-five (ASA I and II) patients scheduled for lower abdominal surgery were randomly divided into three groups. All groups received intrathecal 10 mg bupivacaine; two groups received additional 10 ml of normal saline epidurally with 25 mg tramadol or 25 mg of fentanyl. Groups were than compared for maximal block height, rate of sensory block regression to T10, and motor block regression to Bromage scale of 0. Time to first analgesia and adverse effects were also compared among the three groups. Results: Groups with EVE had statistically significant higher block height, with a significant faster regression that the control group. However, both fentanyl and tramadol groups were inseparable in respect to motor or sensory block regression. Fentanyl group had maximal time to first analgesia, followed by tramadol and control groups. Hemodynamic alterations were also more common in EVE groups. Conclusion: EVE can increase the block height significantly, but it seems to be limited only to the physical property of additional volume in epidural space and fentanyl or tramadol do not seem to differ in their ability to alter block properties. PMID:25885615

49 CFR 236.709 - Block, absolute.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Block, absolute. 236.709 Section 236.709 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Block, absolute. A block in which no train is permitted to enter while it is occupied by another train. ...

31 CFR 594.301 - Blocked account; blocked property.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Blocked account; blocked property. 594.301 Section 594.301 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS...

Population Blocks.

ERIC Educational Resources Information Center

Smith, Martin H.

1992-01-01

Describes an educational game called "Population Blocks" that is designed to illustrate the concept of exponential growth of the human population and some potential effects of overpopulation. The game material consists of wooden blocks; 18 blocks are painted green (representing land), 7 are painted blue (representing water); and the remaining…

31 CFR 545.301 - Blocked account; blocked property.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Blocked account; blocked property. 545.301 Section 545.301 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY TALIBAN (AFGHANISTAN) SANCTIONS...

49 CFR 236.709 - Block, absolute.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Block, absolute. 236.709 Section 236.709 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Block, absolute. A block in which no train is permitted to enter while it is occupied by another train. ...

31 CFR 551.301 - Blocked account; blocked property.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Blocked account; blocked property. 551.301 Section 551.301 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY SOMALIA SANCTIONS REGULATIONS...

MARINE BOTTOM COMMUNITIES OF BLOCK ISLAND WATERS

EPA Science Inventory

The sea has long been an integral part of Block Island's natural history, beginning when the rising sea surrounded the high spot on a Pleistocene terminal moraine that became Block Island. The southern New England continental shelf, which lies around Block Island, and the Great S...

48 CFR 12.303 - Contract format.

Code of Federal Regulations, 2010 CFR

2010-10-01

... a price evaluation adjustment for small disadvantaged business concerns is applicable (the... for emerging small businesses; (2) Block 18B for remittance address; (3) Block 19 for contract line item numbers; (4) Block 20 for schedule of supplies/services; or (5) Block 25 for accounting data; (c...

Small homologous blocks in phytophthora genomes do not point to an ancient whole-genome duplication.

PubMed

van Hooff, Jolien J E; Snel, Berend; Seidl, Michael F

2014-05-01

Genomes of the plant-pathogenic genus Phytophthora are characterized by small duplicated blocks consisting of two consecutive genes (2HOM blocks) and by an elevated abundance of similarly aged gene duplicates. Both properties, in particular the presence of 2HOM blocks, have been attributed to a whole-genome duplication (WGD) at the last common ancestor of Phytophthora. However, large intraspecies synteny-compelling evidence for a WGD-has not been detected. Here, we revisited the WGD hypothesis by deducing the age of 2HOM blocks. Two independent timing methods reveal that the majority of 2HOM blocks arose after divergence of the Phytophthora lineages. In addition, a large proportion of the 2HOM block copies colocalize on the same scaffold. Therefore, the presence of 2HOM blocks does not support a WGD at the last common ancestor of Phytophthora. Thus, genome evolution of Phytophthora is likely driven by alternative mechanisms, such as bursts of transposon activity.

Working height, block mass and one- vs. two-handed block handling: the contribution to low back and shoulder loading during masonry work.

PubMed

Faber, G S; Kingma, I; Kuijer, P P F M; van der Molen, H F; Hoozemans, M J M; Frings-Dresen, M H W; van Dieën, J H

2009-09-01

The goal of this study was to compare the effects of the task variables block mass, working height and one- vs. two-handed block handling on low back and shoulder loading during masonry work. In a mock-up of a masonry work site, nine masonry workers performed one- and two-handed block-lifting and block-placing tasks at varying heights (ranging from floor to shoulder level) with blocks of varying mass (ranging from 6 to 16 kg). Kinematics and ground reaction forces were measured and used in a 3-D linked segment model to calculate low back and shoulder loading. Increasing lifting height appeared to be the most effective way to reduce low back loading. However, working at shoulder level resulted in relatively high shoulder loading. Therefore, it was recommended to organise masonry work in such a way that blocks are handled with the hands at about iliac crest height as much as possible.

Block-based scalable wavelet image codec

NASA Astrophysics Data System (ADS)

Bao, Yiliang; Kuo, C.-C. Jay

1999-10-01

This paper presents a high performance block-based wavelet image coder which is designed to be of very low implementational complexity yet with rich features. In this image coder, the Dual-Sliding Wavelet Transform (DSWT) is first applied to image data to generate wavelet coefficients in fixed-size blocks. Here, a block only consists of wavelet coefficients from a single subband. The coefficient blocks are directly coded with the Low Complexity Binary Description (LCBiD) coefficient coding algorithm. Each block is encoded using binary context-based bitplane coding. No parent-child correlation is exploited in the coding process. There is also no intermediate buffering needed in between DSWT and LCBiD. The compressed bit stream generated by the proposed coder is both SNR and resolution scalable, as well as highly resilient to transmission errors. Both DSWT and LCBiD process the data in blocks whose size is independent of the size of the original image. This gives more flexibility in the implementation. The codec has a very good coding performance even the block size is (16,16).

The blocking reagent optimization for the magnetoelastic biosensor

NASA Astrophysics Data System (ADS)

Hu, Jiajia; Chai, Yating; Horikawa, Shin; Wikle, Howard C.; Wang, Feng'en; Du, Songtao; Chin, Bryan A.; Hu, Jing

2015-06-01

The wireless phage-based magnetoelastic (ME) biosensor has proven to be promising for real-time detection of pathogenic bacteria on fresh produces. The ME biosensor consists of a freestanding ME resonator as the signal transducer and filamentous phage as the biomolecular-recognition element, which can specifically bind to a pathogen of interest. Due to the Joule magnetostriction effect, the biosensors can be placed into mechanical resonance when subjected to a time-varying magnetic field alternating at the sensor's resonant frequency. Upon the attachment of the target pathogen, the mass of the biosensor increases, thereby decreasing its resonant frequency. This paper presents an investigation of blocking reagents immobilization for detecting Salmonella Typhimurium on fresh food surfaces. Three different blocking reagents (BSA, SuperBlock blocking buffer, and blocker BLOTTO) were used and compared. The optical microscope was used for bacterial cells binding observation. Student t-test was used to statistically analysis the experiment results. The results shows that SuperBlock blocking buffer and blocker BLOTTO have much better blocking performance than usually used BSA.

The Combination of RSA And Block Chiper Algorithms To Maintain Message Authentication

NASA Astrophysics Data System (ADS)

Yanti Tarigan, Sepri; Sartika Ginting, Dewi; Lumban Gaol, Melva; Lorensi Sitompul, Kristin

2017-12-01

RSA algorithm is public key algorithm using prime number and even still used today. The strength of this algorithm lies in the exponential process, and the factorial number into 2 prime numbers which until now difficult to do factoring. The RSA scheme itself adopts the block cipher scheme, where prior to encryption, the existing plaintext is divide in several block of the same length, where the plaintext and ciphertext are integers between 1 to n, where n is typically 1024 bit, and the block length itself is smaller or equal to log(n)+1 with base 2. With the combination of RSA algorithm and block chiper it is expected that the authentication of plaintext is secure. The secured message will be encrypted with RSA algorithm first and will be encrypted again using block chiper. And conversely, the chipertext will be decrypted with the block chiper first and decrypted again with the RSA algorithm. This paper suggests a combination of RSA algorithms and block chiper to secure data.

Extrapunitive and Intropunitive Individuals Activate Different Parts of the Prefrontal Cortex under an Ego-Blocking Frustration

PubMed Central

Minamoto, Takehiro; Osaka, Mariko; Yaoi, Ken; Osaka, Naoyuki

2014-01-01

Different people make different responses when they face a frustrating situation: some punish others (extrapunitive), while others punish themselves (intropunitive). Few studies have investigated the neural structures that differentiate extrapunitive and intropunitive individuals. The present fMRI study explored these neural structures using two different frustrating situations: an ego-blocking situation which blocks a desire or goal, and a superego-blocking situation which blocks self-esteem. In the ego-blocking condition, the extrapunitive group (n = 9) showed greater activation in the bilateral ventrolateral prefrontal cortex, indicating that these individuals prefer emotional processing. On the other hand, the intropunitive group (n = 9) showed greater activation in the left dorsolateral prefrontal cortex, possibly reflecting an effortful control for anger reduction. Such patterns were not observed in the superego-blocking condition. These results indicate that the prefrontal cortex is the source of individual differences in aggression direction in the ego-blocking situation. PMID:24454951

Phase response curves for models of earthquake fault dynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franović, Igor, E-mail: franovic@ipb.ac.rs; Kostić, Srdjan; Perc, Matjaž

We systematically study effects of external perturbations on models describing earthquake fault dynamics. The latter are based on the framework of the Burridge-Knopoff spring-block system, including the cases of a simple mono-block fault, as well as the paradigmatic complex faults made up of two identical or distinct blocks. The blocks exhibit relaxation oscillations, which are representative for the stick-slip behavior typical for earthquake dynamics. Our analysis is carried out by determining the phase response curves of first and second order. For a mono-block fault, we consider the impact of a single and two successive pulse perturbations, further demonstrating how themore » profile of phase response curves depends on the fault parameters. For a homogeneous two-block fault, our focus is on the scenario where each of the blocks is influenced by a single pulse, whereas for heterogeneous faults, we analyze how the response of the system depends on whether the stimulus is applied to the block having a shorter or a longer oscillation period.« less

Kinetic control of block copolymer self-assembly into multicompartment and novel geometry nanoparticles

NASA Astrophysics Data System (ADS)

Chen, Yingchao; Wang, Xiaojun; Zhang, Ke; Wooley, Karen; Mays, Jimmy; Percec, Virgil; Pochan, Darrin

2012-02-01

Micelles with the segregation of hydrophobic blocks trapped in the same nanoparticle core have been produced through co-self-assembly of two block copolymers in THF/water dilute solution. The dissolution of two block copolymer sharing the same polyacrylic acid PAA blocks in THF undergoes consequent aggregation and phase separation through either slow water titration or quick water addition that triggers the micellar formation. The combination and comparison of the two water addition kinetic pathways are the keys of forming multicompartment structures at high water content. Importantly, the addition of organic diamine provides for acid-base complexation with the PAA side chains which, in turn, plays the key role of trapping unlike hydrophobic blocks from different block copolymers into one nanoparticle core. The kinetic control of solution assembly can be applied to other molecular systems such as dendrimers as well as other block copolymer molecules. Transmission electron microscopy, cryogenic transmission electron microscopy, light scattering have been applied to characterize the micelle structures.

Moisture and Thermal Conductivity of Lightweight Block Walls

NASA Astrophysics Data System (ADS)

Joosep, R.

2015-11-01

This article examines thermal properties of lightweight block walls and their changes over the course of time. Three different types of lightweight blocks and two types of heat insulation are used in construction. Aeroc aerated concrete blocks are in use, as well as compacted LECA (Lightweight Expanded Clay Aggregate) Fibo blocks made from burned clay and Silbet blocks produced from oil shale ash. Expanded Thermisol EPS60F polystyrene plates and glass wool Isover OL-P plates are used for thermal insulation. The actual and computational values of thermal conductivity and the water draining properties of walls over time are compared in this article. Water draining from glass wool walls is relatively fast. Water-draining can take over a year in polystyrene insulated walls. All four wall constructions can be used as external walls, but care must be taken regarding the moisture content of the blocks during construction (the construction should be handled with care to minimise the moisture in the blocks), especially in polystyrene board-insulated walls.

NUCLEAR REACTOR CORE DESIGN

DOEpatents

Mahlmeister, J.E.; Peck, W.S.; Haberer, W.V.; Williams, A.C.

1960-03-22

An improved core design for a sodium-cooled, graphitemoderated nuclear reactor is described. The improved reactor core comprises a number of blocks of moderator material, each block being in the shape of a regular prism. A number of channels, extending the length of each block, are disposed around the periphery. When several blocks are placed in contact to form the reactor core, the channels in adjacent blocks correspond with each other to form closed conduits extending the length of the core. Fuel element clusters are disposed in these closed conduits, and liquid coolant is forced through the annulus between the fuel cluster and the inner surface of the conduit. In a preferred embodiment of the invention, the moderator blocks are in the form of hexagonal prisms with longitudinal channels cut into the corners of the hexagon. The main advantage of an "edge-loaded" moderator block is that fewer thermal neutrons are absorbed by the moderator cladding, as compared with a conventional centrally loaded moderator block.

Revisit submergence of ice blocks in front of ice cover—an experimental study

NASA Astrophysics Data System (ADS)

Wang, Jun; Wu, Yi-fan; Sui, Jueyi

2018-04-01

The present paper studies the stabilities of ice blocks in front of an ice cover based on experiments carried out in laboratory by using four types of ice blocks with different dimensions. The forces acting on the ice blocks in front of the ice cover are analyzed. The critical criteria for the entrainment of ice blocks in front of the ice cover are established by considering the drag force caused by the flowing water, the collision force, and the hydraulic pressure force. Formula for determining whether or not an ice block will be entrained under the ice cover is derived. All three dimensions of the ice block are considered in the proposed formula. The velocities calculated by using the developed formula are compared with those of calculated by other formulas proposed by other researchers, as well as the measured flow velocities for the entrainment of ice blocks in laboratory. The fitting values obtained by using the derived formula agree well with the experimental results.

Transversus Abdominis Plane Block versus Ilioinguinal/Iliohypogastric Nerve Block with Wound Infiltration for Postoperative Analgesia in Inguinal Hernia Surgery: A Randomized Clinical Trial.

PubMed

Sujatha, Chinthavali; Zachariah, Mamie; Ranjan, R V; George, Sagiev Koshy; Ramachandran, T R; Pillai, Anil Radhakrishna

2017-01-01

Various analgesic modalities have been used for postoperative analgesia in patients undergoing inguinal hernia surgery. In this randomized clinical trial, we have compared the analgesic efficacy of transversus abdominis plane (TAP) block with that of ilioinguinal/iliohypogastric (IIIH) nerve block with wound infiltration in patients undergoing unilateral open inguinal hernia repair. The primary objective of this study was to compare the efficacy of postoperative analgesia of ultrasound-guided TAP block and IIIH block with wound infiltration (WI) in patients undergoing open inguinal hernia surgery. This was a randomized clinical trial performed in a tertiary care hospital. Sixty patients scheduled for hernia repair were randomized into two groups, Group T and Group I. Postoperatively, under ultrasound guidance, Group T received 20 ml of 0.25% ropivacaine - TAP block and Group I received 10 ml of 0.25% ropivacaine - IIIH block + WI with 10 ml of 0.25% ropivacaine. The primary outcome measure was the time to rescue analgesia in the first 24 h postoperatively. Fentanyl along with diclofenac was given as first rescue analgesic when the patient complained of pain. Statistical comparisons were performed using Student's t -test and Chi-square test. Mean time to rescue analgesia was 5.900 ± 1.881 h and 3.766 ± 1.754 h ( P < 0.001) and the mean pain scores were 5.73 ± 0.784 and 6.03 ± 0.850 for Group TAP and IIIH + WI, respectively. Hemodynamics were stable in both the groups. One-third of the patients received one dose of paracetamol in addition to the rescue analgesic in the first 24 h. There were no complications attributed to the block. As a multimodal analgesic regimen, definitely both TAP block and IIIH block with wound infiltration have a supporting role in providing analgesia in the postoperative period for adult inguinal hernia repair. In this study, ultrasound-guided TAP block provided longer pain control postoperatively than IIIH block with WI after inguinal hernia repair. There were no complications attributed to the blocks in either of the group.

Combined KHFAC+DC nerve block without onset or reduced nerve conductivity after block

PubMed Central

Franke, Manfred; Vrabec, Tina; Wainright, Jesse; Bhadra, Niloy; Bhadra, Narendra; Kilgore, Kevin

2017-01-01

Background Kilohertz Frequency Alternating Current waveforms (KHFAC) have been shown to provide peripheral nerve conductivity block in many acute and chronic animal models. KHFAC nerve block could be used to address multiple disorders caused by neural over-activity, including blocking pain and spasticity. However, one drawback of KHFAC block is a transient activation of nerve fibers during the initiation of the nerve block, called the onset response. The objective of this study is to evaluate the feasibility of using charge balanced direct current (CBDC) waveforms to temporarily block motor nerve conductivity distally to the KHFAC electrodes to mitigate the block onset-response. Methods A total of eight animals were used in this study. A set of four animals were used to assess feasibility and reproducibility of a combined KHFAC+CBDC block. A following randomized study, conducted on a second set of four animals, compared the onset response resulting from KHFAC alone and combined KHFAC+CBDC waveforms. To quantify the onset, peak forces and the force-time integral were measured during KHFAC block initiation. Nerve conductivity was monitored throughout the study by comparing muscle twitch forces evoked by supra-maximal stimulation proximal and distal to the block electrodes. Each animal of the randomized study received at least 300 seconds (range: 318 to 1563s) of cumulative DC to investigate the impact of combined KHFAC+CBDC on nerve viability. Results The peak onset force was reduced significantly from 20.73 N (range: 18.6–26.5 N) with KHFAC alone to 0.45 N (range: 0.2–0.7 N) with the combined CBDC and KHFAC block waveform (p<0.001). The area under the force curve was reduced from 6.8 Ns (range: 3.5–21.9 Ns) to 0.54 Ns (range: 0.18–0.86Ns) (p<0.01). No change in nerve conductivity was observed after application of the combined KHFAC+CBDC block relative to KHFAC waveforms. Conclusion The distal application of CBDC can significantly reduce or even completely prevent the KHFAC onset response without a change in nerve conductivity. PMID:25115572

Combined KHFAC + DC nerve block without onset or reduced nerve conductivity after block

NASA Astrophysics Data System (ADS)

Franke, Manfred; Vrabec, Tina; Wainright, Jesse; Bhadra, Niloy; Bhadra, Narendra; Kilgore, Kevin

2014-10-01

Objective. Kilohertz frequency alternating current (KHFAC) waveforms have been shown to provide peripheral nerve conductivity block in many acute and chronic animal models. KHFAC nerve block could be used to address multiple disorders caused by neural over-activity, including blocking pain and spasticity. However, one drawback of KHFAC block is a transient activation of nerve fibers during the initiation of the nerve block, called the onset response. The objective of this study is to evaluate the feasibility of using charge balanced direct current (CBDC) waveforms to temporarily block motor nerve conductivity distally to the KHFAC electrodes to mitigate the block onset-response. Approach. A total of eight animals were used in this study. A set of four animals were used to assess feasibility and reproducibility of a combined KHFAC + CBDC block. A following randomized study, conducted on a second set of four animals, compared the onset response resulting from KHFAC alone and combined KHFAC + CBDC waveforms. To quantify the onset, peak forces and the force-time integral were measured during KHFAC block initiation. Nerve conductivity was monitored throughout the study by comparing muscle twitch forces evoked by supra-maximal stimulation proximal and distal to the block electrodes. Each animal of the randomized study received at least 300 s (range: 318-1563 s) of cumulative dc to investigate the impact of combined KHFAC + CBDC on nerve viability. Main results. The peak onset force was reduced significantly from 20.73 N (range: 18.6-26.5 N) with KHFAC alone to 0.45 N (range: 0.2-0.7 N) with the combined CBDC and KHFAC block waveform (p < 0.001). The area under the force curve was reduced from 6.8 Ns (range: 3.5-21.9 Ns) to 0.54 Ns (range: 0.18-0.86 Ns) (p < 0.01). No change in nerve conductivity was observed after application of the combined KHFAC + CBDC block relative to KHFAC waveforms. Significance. The distal application of CBDC can significantly reduce or even completely prevent the KHFAC onset response without a change in nerve conductivity.

A discrete element modelling approach for block impacts on trees

NASA Astrophysics Data System (ADS)

Toe, David; Bourrier, Franck; Olmedo, Ignatio; Berger, Frederic

2015-04-01

These past few year rockfall models explicitly accounting for block shape, especially those using the Discrete Element Method (DEM), have shown a good ability to predict rockfall trajectories. Integrating forest effects into those models still remain challenging. This study aims at using a DEM approach to model impacts of blocks on trees and identify the key parameters controlling the block kinematics after the impact on a tree. A DEM impact model of a block on a tree was developed and validated using laboratory experiments. Then, key parameters were assessed using a global sensitivity analyse. Modelling the impact of a block on a tree using DEM allows taking into account large displacements, material non-linearities and contacts between the block and the tree. Tree stems are represented by flexible cylinders model as plastic beams sustaining normal, shearing, bending, and twisting loading. Root soil interactions are modelled using a rotation stiffness acting on the bending moment at the bottom of the tree and a limit bending moment to account for tree overturning. The crown is taken into account using an additional mass distribute uniformly on the upper part of the tree. The block is represented by a sphere. The contact model between the block and the stem consists of an elastic frictional model. The DEM model was validated using laboratory impact tests carried out on 41 fresh beech (Fagus Sylvatica) stems. Each stem was 1,3 m long with a diameter between 3 to 7 cm. Wood stems were clamped on a rigid structure and impacted by a 149 kg charpy pendulum. Finally an intensive simulation campaign of blocks impacting trees was done to identify the input parameters controlling the block kinematics after the impact on a tree. 20 input parameters were considered in the DEM simulation model : 12 parameters were related to the tree and 8 parameters to the block. The results highlight that the impact velocity, the stem diameter, and the block volume are the three input parameters that control the block kinematics after impact.

Interscalene brachial plexus blocks under general anesthesia in children: is this safe practice?: A report from the Pediatric Regional Anesthesia Network (PRAN).

PubMed

Taenzer, Andreas; Walker, Benjamin J; Bosenberg, Adrian T; Krane, Elliot J; Martin, Lynn D; Polaner, David M; Wolf, Christie; Suresh, Santhanam

2014-01-01

A practice advisory on regional anesthesia in children in 2008, published in this journal, supported the placement of regional blocks in children under general anesthesia (GA). Interscalene brachial plexus (IS) blocks were specifically excluded, based on case reports (level 3 evidence) of injury, which occurred predominantly in heavily sedated or anesthetized adult patients. Apart from case reports, there is a paucity of data that explore the safety of IS blocks placed in patients under GA, and the level of evidence available on which to base recommendations is limited. Querying the database of the Pediatric Regional Anesthesia Network (PRAN), we report on the incidence of postoperative neurological symptoms, local anesthetic systemic toxicity, and other reported adverse events in children receiving IS blocks under GA or sedated. A total of 518 interscalene blocks were performed, 390 under GA and 123 with the patient sedated or awake (5 cases had missing status); 472 of these were single injection, and 46 involved the placement of infusion catheters. Eighty-eight percent of blocks were placed with ultrasound guidance, 7.7% with no location device, and 2.5% with a nerve stimulator. No local anesthetic systemic toxicity, postoperative neurological symptoms, cardiovascular complications, or dural puncture was reported in this cohort. There were 1 vascular puncture and 1 postoperative infection. These negative results are compatible with 0 to 7.7/1000 events for each of these complications for IS blocks placed under GA. There was no paralysis, motor block, or sensory deficit beyond the expected block duration time. Analyzing interscalene blocks in children placed under GA, we identified no serious adverse events. The upper limit of the confidence interval for these events is similar to that in awake or sedated adults receiving IS blocks. Based on these prospectively collected data, placement of IS blocks under GA in children is no less safe than placement in awake adults, calling into question the American Society of Regional Anesthesia and Pain Medicine advisory proscribing GA during IS block in pediatric patients.

Pectoral nerve block (Pecs block) with sedation for breast conserving surgery without general anesthesia.

PubMed

Moon, Eun-Jin; Kim, Seung-Beom; Chung, Jun-Young; Song, Jeong-Yoon; Yi, Jae-Woo

2017-09-01

Most regional anesthesia in breast surgeries is performed as postoperative pain management under general anesthesia, and not as the primary anesthesia. Regional anesthesia has very few cardiovascular or pulmonary side-effects, as compared with general anesthesia. Pectoral nerve block is a relatively new technique, with fewer complications than other regional anesthesia. We performed Pecs I and Pec II block simultaneously as primary anesthesia under moderate sedation with dexmedetomidine for breast conserving surgery in a 49-year-old female patient with invasive ductal carcinoma. Block was uneventful and showed no complications. Thus, Pecs block with sedation could be an alternative to general anesthesia for breast surgeries.

Transmittance of tinted and UV-blocking disposable contact lenses.

PubMed

Harris, M G; Haririfar, M; Hirano, K Y

1999-03-01

Tinted and ultraviolet (UV)-blocking disposable contact lenses have become increasingly popular over the last decade. Wearers of UV-blocking contact lenses could benefit greatly by protecting their eyes from potential UV radiation damage. A Uvikon 930 dual beam spectrophotometer was used to measure three enhancement-tinted lenses (royal blue, evergreen, and aqua), two types of UV-blocking lenses, and two types of non-UV-blocking lenses. Enhancement-tinted lenses did show a decrease in transmittance at certain wavelengths on the visible spectrum, but they did not reduce the transmittance of UV radiation to the extent of the UV-blocking lenses designed specifically for this purpose.

Risk of advanced heart block during extradural anaesthesia in patients with right bundle branch block and left anterior hemiblock.

PubMed

Coriat, P; Harari, A; Ducardonet, A; Tarot, J P; Viars, P

1981-05-01

Electrocardiographic recording by Holter monitoring demonstrated the absence of any modification, however minimal, of the intranodal conduction during surgical procedures under extradural anaesthesia in 20 patients with right bundle branch block (RBBB) and left anterior hemiblock (LAHB) but without symptoms. These data suggest that extradural anaesthesia can be used safely in patients with asymptomatic chronic RBBB and LAHB without prophylactic insertion of pacemakers. However, patients having experienced either syncope or transient Mobitz II second degree AV block are likely to have a trifascicular block and increased risk of advanced heart block during extradural anaesthesia.

Arterial and venous plasma levels of bupivacaine following peripheral nerve blocks.

PubMed

Moore, D C; Mather, L E; Bridenbaugh, L D; Balfour, R I; Lysons, D F; Horton, W G

1976-01-01

Mean arterial plasma (MAP) and peripheral mean venous plasma (MVP) levels of bupivacaine were ascertained in 3 groups of 10 patients each for: (1) intercostal nerve block, 400 mg; (2) block of the sciatic, femoral, and lateral femoral cutaneous nerves, with or without block of the obturator nerve, 400 mg; and (3) supraclavicular brachial plexus block, 300 mg. MAP levels were consistently higher than simultaneously sampled MVP levels, the highest levels occurring from bilateral intercostal nerve block. No evidence of systemic toxicity was observed. The results suggest that bupivacaine has a much wider margin of safety in humans than is now stated.

Block copolymers from ionic liquids for the preparation of thin carbonaceous shells

PubMed Central

Hanif, Sadaf; Oschmann, Bernd; Spetter, Dmitri; Tahir, Muhammad Nawaz; Tremel, Wolfgang

2017-01-01

This paper describes the controlled radical polymerization of an ionic-liquid monomer by RAFT polymerization. This allows the control over the molecular weight of ionic liquid blocks in the range of 8000 and 22000 and of the block-copolymer synthesis. In this work we focus on block copolymers with an anchor block. They can be used to control the formation of TiO2 nanoparticles, which are functionalized thereafter with a block of ionic-liquid polymer. Pyrolysis of these polymer functionalized inorganic nanoparticles leads to TiO2 nanoparticles coated with a thin carbonaceous shell. Such materials may, e.g., be interesting as battery materials. PMID:28904612

Block copolymers from ionic liquids for the preparation of thin carbonaceous shells.

PubMed

Hanif, Sadaf; Oschmann, Bernd; Spetter, Dmitri; Tahir, Muhammad Nawaz; Tremel, Wolfgang; Zentel, Rudolf

2017-01-01

This paper describes the controlled radical polymerization of an ionic-liquid monomer by RAFT polymerization. This allows the control over the molecular weight of ionic liquid blocks in the range of 8000 and 22000 and of the block-copolymer synthesis. In this work we focus on block copolymers with an anchor block. They can be used to control the formation of TiO 2 nanoparticles, which are functionalized thereafter with a block of ionic-liquid polymer. Pyrolysis of these polymer functionalized inorganic nanoparticles leads to TiO 2 nanoparticles coated with a thin carbonaceous shell. Such materials may, e.g., be interesting as battery materials.

[Complete atrioventricular block in Duchenne muscular dystrophy].

PubMed

Kuru, Satoshi; Tanahashi, Tamotsu; Matsumoto, Shinjirou; Kitamura, Tetsuya; Konagaya, Masaaki

2012-01-01

We report a case of complete atrioventricular (AV) block in a 40-year-old patient with Duchenne muscular dystrophy (DMD). While he was bed-ridden and required mechanical ventilation, his cardiac involvement was mild. He had the deletion of exon 45-52 in the dystrophin gene. He underwent transient complete AV block and came to require pacemaker implantation due to recurrence of complete AV block ten days after the first attack. Electrophysiological study revealed mild prolonged AH and HV interval. Although DMD patients with AV block have been rarely reported so far, attention should be paid to AV block for patients who prolonged their lives.

BLOCKING OSCILLATOR DOUBLE PULSE GENERATOR CIRCUIT

DOEpatents

Haase, J.A.

1961-01-24

A double-pulse generator, particuiarly a double-pulse generator comprising a blocking oscillator utilizing a feedback circuit to provide means for producing a second pulse within the recovery time of the blocking oscillator, is described. The invention utilized a passive network which permits adjustment of the spacing between the original pulses derived from the blocking oscillator and further utilizes the original pulses to trigger a circuit from which other pulses are initiated. These other pulses are delayed and then applied to the input of the blocking oscillator, with the result that the output from the oscillator circuit contains twice the number of pulses originally initiated by the blocking oscillator itself.

Paroxysmal atrioventricular block: Electrophysiological mechanism of phase 4 conduction block in the His-Purkinje system: A comparison with phase 3 block.

PubMed

Shenasa, Mohammad; Josephson, Mark E; Wit, Andrew L

2017-11-01

Paroxysmal atrioventricular (A-V) block is relatively rare, and due to its transient nature, it is often under recognized. It is often triggered by atrial, junctional, or ventricular premature beats, and occurs in the presence of a diseased His-Purkinje system (HPS). Here, we present a 45-year-old white male who was admitted for observation due to recurrent syncope and near-syncope, who had paroxysmal A-V block. The likely cellular electrophysiological mechanisms(s) of paroxysmal A-V block and its differential diagnosis and management are discussed. Continuous electrocardiographic monitoring was done while the patient was in the cardiac unit. Multiple episodes of paroxysmal A-V block were documented in this case. All episodes were initiated and terminated with atrial/junctional premature beats. The patient underwent permanent pacemaker implantation and has remained asymptomatic since then. Paroxysmal A-V block is rare and often causes syncope or near-syncope. Permanent pacemaker implantation is indicated according to the current guidelines. Paroxysmal A-V block occurs in the setting of diseased HPS and is bradycardia-dependent. The detailed electrophysiological mechanisms, which involve phase 4 diastolic depolarization, and differential diagnosis are discussed. © 2017 Wiley Periodicals, Inc.

A protein block based fold recognition method for the annotation of twilight zone sequences.

PubMed

Suresh, V; Ganesan, K; Parthasarathy, S

2013-03-01

The description of protein backbone was recently improved with a group of structural fragments called Structural Alphabets instead of the regular three states (Helix, Sheet and Coil) secondary structure description. Protein Blocks is one of the Structural Alphabets used to describe each and every region of protein backbone including the coil. According to de Brevern (2000) the Protein Blocks has 16 structural fragments and each one has 5 residues in length. Protein Blocks fragments are highly informative among the available Structural Alphabets and it has been used for many applications. Here, we present a protein fold recognition method based on Protein Blocks for the annotation of twilight zone sequences. In our method, we align the predicted Protein Blocks of a query amino acid sequence with a library of assigned Protein Blocks of 953 known folds using the local pair-wise alignment. The alignment results with z-value ≥ 2.5 and P-value ≤ 0.08 are predicted as possible folds. Our method is able to recognize the possible folds for nearly 35.5% of the twilight zone sequences with their predicted Protein Block sequence obtained by pb_prediction, which is available at Protein Block Export server.

How Properties of Kenaf Fibers from Burkina Faso Contribute to the Reinforcement of Earth Blocks

PubMed Central

Millogo, Younoussa; Aubert, Jean-Emmanuel; Hamard, Erwan; Morel, Jean-Claude

2015-01-01

Physicochemical characteristics of Hibiscus cannabinus (kenaf) fibers from Burkina Faso were studied using X-ray diffraction (XRD), infrared spectroscopy, thermal gravimetric analysis (TGA), chemical analysis and video microscopy. Kenaf fibers (3 cm long) were used to reinforce earth blocks, and the mechanical properties of reinforced blocks, with fiber contents ranging from 0.2 to 0.8 wt%, were investigated. The fibers were mainly composed of cellulose type I (70.4 wt%), hemicelluloses (18.9 wt%) and lignin (3 wt%) and were characterized by high tensile strength (1 ± 0.25 GPa) and Young’s modulus (136 ± 25 GPa), linked to their high cellulose content. The incorporation of short fibers of kenaf reduced the propagation of cracks in the blocks, through the good adherence of fibers to the clay matrix, and therefore improved their mechanical properties. Fiber incorporation was particularly beneficial for the bending strength of earth blocks because it reinforces these blocks after the failure of soil matrix observed for unreinforced blocks. Blocks reinforced with such fibers had a ductile tensile behavior that made them better building materials for masonry structures than unreinforced blocks.

Revisiting Parallel Cyclic Reduction and Parallel Prefix-Based Algorithms for Block Tridiagonal System of Equations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seal, Sudip K; Perumalla, Kalyan S; Hirshman, Steven Paul

2013-01-01

Simulations that require solutions of block tridiagonal systems of equations rely on fast parallel solvers for runtime efficiency. Leading parallel solvers that are highly effective for general systems of equations, dense or sparse, are limited in scalability when applied to block tridiagonal systems. This paper presents scalability results as well as detailed analyses of two parallel solvers that exploit the special structure of block tridiagonal matrices to deliver superior performance, often by orders of magnitude. A rigorous analysis of their relative parallel runtimes is shown to reveal the existence of a critical block size that separates the parameter space spannedmore » by the number of block rows, the block size and the processor count, into distinct regions that favor one or the other of the two solvers. Dependence of this critical block size on the above parameters as well as on machine-specific constants is established. These formal insights are supported by empirical results on up to 2,048 cores of a Cray XT4 system. To the best of our knowledge, this is the highest reported scalability for parallel block tridiagonal solvers to date.« less

Tunable Encapsulation Structure of Block Copolymer Coated Single-Walled Carbon Nanotubes in Aqueous Solution

DOE PAGES

Han, Youngkyu; Ahn, Suk-Kyun; Zhang, Zhe; ...

2015-05-15

The nano-sized and shape-tunable molecular building blocks can provide great opportunities for the fabrication of precisely controlled nanostructures. In this work, we have fabricated a molecular building block of single-walled carbon nanotubes (SWNTs) coated by PPO-PEO-PPO block copolymers whose encapsulation structure can be controlled via temperature or addition of small molecules. The structure and optical properties of SWNT-block copolymers have been investigated by small angle neutron scattering (SANS), ultraviolet-visible (UV-vis) spectroscopy, atomic force microscopy (AFM), and molecular dynamics (MD) simulation. The structure of the hydrated block copolymer layer surrounding SWNT can be controlled reversibly by varying temperature as well asmore » by irreversibly adding 5-methylsalicylic acid (5MS). Increasing hydrophobicity of the polymers with temperature and strong tendency of 5MS to interact with both block copolymers and orbitals of the SWNTs are likely to be responsible for the significant structural change of the block copolymer encapsulation layer, from loose corona shell to tightly encapsulating compact shell. These result shows an efficient and simple way to fabricate and manipulate carbon-based nano building blocks in aqueous systems with tunable structure.« less

Automation of block assignment planning using a diagram-based scenario modeling method

NASA Astrophysics Data System (ADS)

Hwang, In Hyuck; Kim, Youngmin; Lee, Dong Kun; Shin, Jong Gye

2014-03-01

Most shipbuilding scheduling research so far has focused on the load level on the dock plan. This is be¬cause the dock is the least extendable resource in shipyards, and its overloading is difficult to resolve. However, once dock scheduling is completed, making a plan that makes the best use of the rest of the resources in the shipyard to minimize any additional cost is also important. Block assignment planning is one of the midterm planning tasks; it assigns a block to the facility (factory/shop or surface plate) that will actually manufacture the block according to the block characteristics and current situation of the facility. It is one of the most heavily loaded midterm planning tasks and is carried out manu¬ally by experienced workers. In this study, a method of representing the block assignment rules using a diagram was su¬ggested through analysis of the existing manual process. A block allocation program was developed which automated the block assignment process according to the rules represented by the diagram. The planning scenario was validated through a case study that compared the manual assignment and two automated block assignment results.

Performance Evaluation of Frequency Transform Based Block Classification of Compound Image Segmentation Techniques

NASA Astrophysics Data System (ADS)

Selwyn, Ebenezer Juliet; Florinabel, D. Jemi

2018-04-01

Compound image segmentation plays a vital role in the compression of computer screen images. Computer screen images are images which are mixed with textual, graphical, or pictorial contents. In this paper, we present a comparison of two transform based block classification of compound images based on metrics like speed of classification, precision and recall rate. Block based classification approaches normally divide the compound images into fixed size blocks of non-overlapping in nature. Then frequency transform like Discrete Cosine Transform (DCT) and Discrete Wavelet Transform (DWT) are applied over each block. Mean and standard deviation are computed for each 8 × 8 block and are used as features set to classify the compound images into text/graphics and picture/background block. The classification accuracy of block classification based segmentation techniques are measured by evaluation metrics like precision and recall rate. Compound images of smooth background and complex background images containing text of varying size, colour and orientation are considered for testing. Experimental evidence shows that the DWT based segmentation provides significant improvement in recall rate and precision rate approximately 2.3% than DCT based segmentation with an increase in block classification time for both smooth and complex background images.

Linking atmospheric blocking to European temperature extremes in spring

NASA Astrophysics Data System (ADS)

Brunner, Lukas; Hegerl, Gabriele; Steiner, Andrea

2017-04-01

The weather in Europe is influenced by a range of dynamical features such as the Atlantic storm tracks, the jet stream, and atmospheric blocking. Blocking describes an atmospheric situation in which a stationary and persistent high pressure system interrupts the climatological flow for several days to weeks. It can trigger cold and warm spells which is of special relevance during the spring season because vegetation is particularly vulnerable to extreme temperatures in the early greening phase. We investigate European cold and warm spells in the 36 springs from 1979 to 2014 in temperature data from the European daily high-resolution gridded dataset (E-OBS) and connect them to blocking derived from geopotential height fields from ERA-Interim. A highly significant link between blocking and both, cold and warm spells is found that changes during spring. Resolving monthly frequencies, we find a shift in the preferred locations of blocking throughout spring. The maximum blocking frequency during cold spells shifts from Scandinavia to the British Isles in March and April. During warm spells it continuously shifts further northward during the spring season. The location of the block is found to be essential for the sign of the relationship. Blocking over the north-eastern Atlantic and over northern Europe is strongly linked to cold conditions, while blocking over central Europe is associated with warm conditions. Consistently the spatial distribution of temperature extremes across Europe is highly sensitive to the occurrence of blocking. More than 80 % of cold spells in south-eastern Europe occur during blocking, compared to less than 30 % in northern Europe. Warm spells show the opposite pattern and more than 70 % co-occur with blocking in northern Europe, compared to less than 30 % in parts of southern Europe. We find considerable interannual variability over the analysis period from 1979 to 2014 but also a decrease in cold spells and an increase in warm spells, especially in the last 15 years, indicating the influence of global warming. The change to a warmer environment holds the potential for even higher vulnerability to cold extremes, which can be triggered by blocking in late spring. Brunner, L., G. Hegerl, and A. Steiner, 2017: Connecting Atmospheric Blocking to European Temperature Extremes in Spring. J. Climate, 30, 585-594, doi: 10.1175/JCLI-D-16-0518.1.

Effect of tramadol as an adjuvant to local anesthetics for brachial plexus block: A systematic review and meta-analysis

PubMed Central

Ju, Bum Jun; Jang, Yoo Kyung; You, Hae Seun; Kang, Hyun; Park, Ji Yong

2017-01-01

Background Tramadol, a 4-phenyl-piperidine analog of codeine, has a unique action in that it has a central opioidergic, noradrenergic, serotonergic analgesic, and peripheral local anesthetic (LA) effect. Many studies have reported contradictory findings regarding the peripheral analgesic effect of tramadol as an adjuvant to LA in brachial plexus block (BPB). This meta-analysis aimed to evaluate the effects of tramadol as an adjunct to LA in BPB during shoulder or upper extremity surgery. Methods We searched the PubMed, EMBASE, Cochrane, KoreaMed databases, and Google Scholar for eligible randomized controlled trials (RCTs) that compared BPB with LA alone and BPB with LA and tramadol. Primary outcomes were the effects of tramadol as an adjuvant on duration of sensory block, motor block, and analgesia. Secondary outcomes were the effects of tramadol as an adjuvant on time to onset of sensory block and motor block and on adverse effects. We performed the meta-analysis using Review Manager 5.3 software. Results We identified 16 RCTs with 751 patients. BPB with tramadol prolonged the duration of sensory block (mean difference [MD], -61.5 min; 95% CI, -95.5 to -27.6; P = 0.0004), motor block (MD, -65.6 min; 95% CI, -101.5 to -29.7; P = 0.0003), and analgesia (MD, -125.5 min; 95% CI, -175.8 to -75.3; P < 0.0001) compared with BPB without tramadol. Tramadol also shortened the time to onset of sensory block (MD, 2.1 min; 95% CI, 1.1 to 3.1; P < 0.0001) and motor block (MD, 1.2 min; 95% CI, 0.2 to 2.1; P = 0.010). In subgroup analysis, the duration of sensory block, motor block, and analgesia was prolonged for BPB with tramadol 100 mg (P < 0.05) but not for BPB with tramadol 50 mg. The quality of evidence was high for duration of analgesia according to the GRADE system. Adverse effects were comparable between the studies. Conclusions In upper extremity surgery performed under BPB, use of tramadol 100 mg as an adjuvant to LA appears to prolong the duration of sensory block, motor block, and analgesia, and shorten the time to onset of sensory and motor blocks without altering adverse effects. PMID:28953949

Effect of tramadol as an adjuvant to local anesthetics for brachial plexus block: A systematic review and meta-analysis.

PubMed

Shin, Hye Won; Ju, Bum Jun; Jang, Yoo Kyung; You, Hae Seun; Kang, Hyun; Park, Ji Yong

2017-01-01

Tramadol, a 4-phenyl-piperidine analog of codeine, has a unique action in that it has a central opioidergic, noradrenergic, serotonergic analgesic, and peripheral local anesthetic (LA) effect. Many studies have reported contradictory findings regarding the peripheral analgesic effect of tramadol as an adjuvant to LA in brachial plexus block (BPB). This meta-analysis aimed to evaluate the effects of tramadol as an adjunct to LA in BPB during shoulder or upper extremity surgery. We searched the PubMed, EMBASE, Cochrane, KoreaMed databases, and Google Scholar for eligible randomized controlled trials (RCTs) that compared BPB with LA alone and BPB with LA and tramadol. Primary outcomes were the effects of tramadol as an adjuvant on duration of sensory block, motor block, and analgesia. Secondary outcomes were the effects of tramadol as an adjuvant on time to onset of sensory block and motor block and on adverse effects. We performed the meta-analysis using Review Manager 5.3 software. We identified 16 RCTs with 751 patients. BPB with tramadol prolonged the duration of sensory block (mean difference [MD], -61.5 min; 95% CI, -95.5 to -27.6; P = 0.0004), motor block (MD, -65.6 min; 95% CI, -101.5 to -29.7; P = 0.0003), and analgesia (MD, -125.5 min; 95% CI, -175.8 to -75.3; P < 0.0001) compared with BPB without tramadol. Tramadol also shortened the time to onset of sensory block (MD, 2.1 min; 95% CI, 1.1 to 3.1; P < 0.0001) and motor block (MD, 1.2 min; 95% CI, 0.2 to 2.1; P = 0.010). In subgroup analysis, the duration of sensory block, motor block, and analgesia was prolonged for BPB with tramadol 100 mg (P < 0.05) but not for BPB with tramadol 50 mg. The quality of evidence was high for duration of analgesia according to the GRADE system. Adverse effects were comparable between the studies. In upper extremity surgery performed under BPB, use of tramadol 100 mg as an adjuvant to LA appears to prolong the duration of sensory block, motor block, and analgesia, and shorten the time to onset of sensory and motor blocks without altering adverse effects.

75 FR 28801 - Energy Efficiency and Conservation Block Grant Program: Funding Opportunity Announcement (DE-FOA...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-24

... Conservation Block Grant Program: Funding Opportunity Announcement (DE-FOA-0000013) AGENCY: Office of Energy...-FOA-0000013) for the formula grants of the Energy Efficiency and Conservation Block Grant (EECBG... The Energy Efficiency and Conservation Block Grant (EECBG) [[Page 28802

29 CFR 1919.32 - Specially designed blocks and components.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Specially designed blocks and components. 1919.32 Section 1919.32 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Treatment; Competent Persons § 1919.32 Specially designed blocks and components. (a) Blocks and connecting...

Arrange Time into Blocks.

ERIC Educational Resources Information Center

Zepeda, Sally J.

1999-01-01

Block scheduling can help high school principals become staff-development leaders. It gives teachers more time to help individual students and contributes to improved achievement, attendance, and graduation rates. This paper describes the results of research on block scheduling in urban high schools and concludes that block scheduling can support…

Imide/arylene ether block copolymers

NASA Technical Reports Server (NTRS)

Jensen, B. J.; Hergenrother, P. M.; Bass, R. G.

1991-01-01

Two series of imide/arylene either block copolymers were prepared using an arylene ether block and either an amorphous or semi-crystalline imide block. The resulting copolymers were characterized and selected physical and mechanical properties were determined. These results, as well as comparisons to the homopolymer properties, are discussed.

31 CFR 594.301 - Blocked account; blocked property.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Blocked account; blocked property. 594.301 Section 594.301 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS REGULATIONS...

31 CFR 594.301 - Blocked account; blocked property.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Blocked account; blocked property. 594.301 Section 594.301 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS REGULATIONS...

31 CFR 594.301 - Blocked account; blocked property.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Blocked account; blocked property. 594.301 Section 594.301 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS REGULATIONS...

49 CFR 236.804 - Signal, block.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Signal, block. 236.804 Section 236.804..., MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.804 Signal, block. A roadway signal operated either automatically or manually at the entrance to a block. ...

31 CFR 546.302 - Blocked account; blocked property.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Blocked account; blocked property. 546.302 Section 546.302 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY DARFUR SANCTIONS REGULATIONS General...

Intercultural Communication Activities in the Classroom: Turning Stumbling Blocks into Building Blocks.

ERIC Educational Resources Information Center

Dillon, Randy K.

This paper explores behavior patterns that inhibit effective communication in everyday, educational, and business cross-cultural settings. Opportunities to change these inhibiting patterns, metaphorically referred to as "stumbling blocks," into building blocks or tools for successful intercultural understandings are discussed in the…

78 FR 49334 - Designation of 5 individual(s) and 2 entity(-ies) Pursuant to Executive Order 13581, “Blocking...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-13

... entity(-ies) Pursuant to Executive Order 13581, ``Blocking Property of Transnational Criminal... July 24, 2011, ``Blocking Property of Transnational Criminal Organizations.'' DATES: The designations... President issued Executive Order 13581, ``Blocking Property of Transnational Criminal Organizations'' (the...

31 CFR 593.301 - Blocked account; blocked property.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Blocked account; blocked property. 593.301 Section 593.301 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY FORMER LIBERIAN REGIME OF CHARLES...

CONCRETE BLOCKS' ADVERSE EFFECTS ON INDOOR AIR AND RECOMMENDED SOLUTIONS

EPA Science Inventory

Air infiltration through highly permeable concrete blocks can allow entry of various serious indoor air pollutants. An easy approach to avoiding these pollutants is to select a less–air-permeable concrete block. Tests show that air permeability of concrete blocks can vary by a fa...

31 CFR 510.301 - Blocked account; blocked property.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Blocked account; blocked property. 510.301 Section 510.301 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY NORTH KOREA SANCTIONS REGULATIONS General...

Block Scheduling in High Schools.

ERIC Educational Resources Information Center

Irmsher, Karen

1996-01-01

Block Scheduling has been considered a cure for a lengthy list of educational problems. This report reviews the literature on block schedules and describes some Oregon high schools that have integrated block scheduling. Major disadvantages included resistance to change and requirements that teachers change their teaching strategies. There is…

Organic photosensitive optoelectronic device having a phenanthroline exciton blocking layer

DOEpatents

Thompson, Mark E [Anaheim Hills, CA; Li, Jian [Los Angeles, CA; Forrest, Stephen [Princeton, NJ; Rand, Barry [Princeton, NJ

2011-02-22

An organic photosensitive optoelectronic device, having an anode, a cathode, and an organic blocking layer between the anode and the cathode is described, wherein the blocking layer comprises a phenanthroline derivative, and at least partially blocks at least one of excitons, electrons, and holes.

Self-assembly assisted polymerization (SAAP): approaching long multi-block copolymers with an ordered chain sequence and controllable block length.

PubMed

Wu, Chi; Xie, Zuowei; Zhang, Guangzhao; Zi, Guofu; Tu, Yingfeng; Yang, Yali; Cai, Ping; Nie, Ting

2002-12-07

A combination of polymer physics and synthetic chemistry has enabled us to develop self-assembly assisted polymerization (SAAP), leading to the preparation of long multi-block copolymers with an ordered chain sequence and controllable block lengths.

49 CFR 236.804 - Signal, block.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Signal, block. 236.804 Section 236.804..., MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.804 Signal, block. A roadway signal operated either automatically or manually at the entrance to a block. ...

49 CFR 236.804 - Signal, block.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Signal, block. 236.804 Section 236.804..., MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.804 Signal, block. A roadway signal operated either automatically or manually at the entrance to a block. ...

49 CFR 236.804 - Signal, block.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Signal, block. 236.804 Section 236.804..., MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.804 Signal, block. A roadway signal operated either automatically or manually at the entrance to a block. ...

31 CFR 547.302 - Blocked account; blocked property.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Blocked account; blocked property. 547.302 Section 547.302 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY DEMOCRATIC REPUBLIC OF THE CONGO...

Thin sheet casting with electromagnetic pressurization

DOEpatents

Walk, Steven R.; Slepian, R. Michael; Nathenson, Richard D.; Williams, Robert S.

1991-01-01

An apparatus, method and system for the casting of thin strips or strips of metal upon a moving chill block that includes an electromagnet located so that molten metal poured from a reservoir onto the chill block passes into the magnetic field produced by the electromagnet. The electromagnet produces a force on the molten metal on said chill block in the direction toward said chill block in order to enhance thermal contact between the molten metal and the chill block.

Method of producing nanopatterned articles, and articles produced thereby

DOEpatents

Russell, Thomas P; Park, Soojin; Xu, Ting

2015-04-28

A nanopatterned surface is prepared by forming a block copolymer film on a miscut crystalline substrate, annealing the block copolymer film, then reconstructing the surface of the annealed block copolymer film The method creates a well-ordered array of voids in the block copolymer film that is maintained over a large area. The nanopatterned block copolymer films can be used in a variety of different applications, including the fabrication of high density data storage media.

Synthesis and solution self-assembly of side-chain cobaltocenium-containing block copolymers.

PubMed

Ren, Lixia; Hardy, Christopher G; Tang, Chuanbing

2010-07-07

The synthesis of side-chain cobaltocenium-containing block copolymers and their self-assembly in solution was studied. Highly pure monocarboxycobaltocenium was prepared and subsequently attached to side chains of poly(tert-butyl acrylate)-block-poly(2-hydroxyethyl acrylate), yielding poly(tert-butyl acrylate)-block-poly(2-acryloyloxyethyl cobaltoceniumcarboxylate). The cobaltocenium block copolymers exhibited vesicle morphology in the mixture of acetone and water, while micelles of nanotubes were formed in the mixture of acetone and chloroform.

Heat Capacity of Spider Silk-like Block Copolymers

PubMed Central

Huang, Wenwen; Krishnaji, Sreevidhya; Hu, Xiao; Kaplan, David; Cebe, Peggy

2012-01-01

We synthesized and characterized a new family of di-block copolymers based on the amino acid sequences of Nephila clavipes major ampulate dragline spider silk, having the form HABn and HBAn (n=1–3), comprising an alanine-rich hydrophobic block, A, a glycine-rich hydrophilic block, B, and a histidine tag, H. The reversing heat capacities, Cp(T), for temperatures below and above the glass transition, Tg, were measured by temperature modulated differential scanning calorimetry. For the solid state, we then calculated the heat capacities of our novel block copolymers based on the vibrational motions of the constituent poly(amino acid)s, whose heat capacities are known or can be estimated from the ATHAS Data Bank. For the liquid state, the heat capacity was estimated by using the rotational and translational motions in the polymer chain. Excellent agreement was found between the measured and calculated values of the heat capacity, showing that this method can serve as a standard by which to assess the Cp for other biologically inspired block copolymers. The fraction of beta sheet crystallinity of spider silk block copolymers was also determined by using the predicted Cp, and was verified by wide angle X-ray diffraction and Fourier transform infrared spectroscopy. The glass transition temperatures of spider silk block copolymer were fitted by Kwei’s equation and the results indicate that attractive interaction exists between the A-block and B-block. PMID:23869111

Morphing the feature-based multi-blocks of normative/healthy vertebral geometries to scoliosis vertebral geometries: development of personalized finite element models.

PubMed

Hadagali, Prasannaah; Peters, James R; Balasubramanian, Sriram

2018-03-01

Personalized Finite Element (FE) models and hexahedral elements are preferred for biomechanical investigations. Feature-based multi-block methods are used to develop anatomically accurate personalized FE models with hexahedral mesh. It is tedious to manually construct multi-blocks for large number of geometries on an individual basis to develop personalized FE models. Mesh-morphing method mitigates the aforementioned tediousness in meshing personalized geometries every time, but leads to element warping and loss of geometrical data. Such issues increase in magnitude when normative spine FE model is morphed to scoliosis-affected spinal geometry. The only way to bypass the issue of hex-mesh distortion or loss of geometry as a result of morphing is to rely on manually constructing the multi-blocks for scoliosis-affected spine geometry of each individual, which is time intensive. A method to semi-automate the construction of multi-blocks on the geometry of scoliosis vertebrae from the existing multi-blocks of normative vertebrae is demonstrated in this paper. High-quality hexahedral elements were generated on the scoliosis vertebrae from the morphed multi-blocks of normative vertebrae. Time taken was 3 months to construct the multi-blocks for normative spine and less than a day for scoliosis. Efforts taken to construct multi-blocks on personalized scoliosis spinal geometries are significantly reduced by morphing existing multi-blocks.

A comparison of retrobulbar block, sub-Tenon block, and topical anesthesia during cataract surgery.

PubMed

Ryu, Jung-Hee; Kim, Minsuk; Bahk, Jae-Hyon; Do, Sang-Hwan; Cheong, Il-Young; Kim, Yong-Chul

2009-01-01

This randomized, double-blinded, prospective study was performed to compare the intraoperative hemodynamic variables and the patient-reported outcomes, such as intra- and postoperative analgesia and patient satisfaction, of retrobulbar block, sub-Tenon block, and topical anesthesia during cataract surgery under monitored anesthesia care. Eighty-one patients, ASA physical status I-III, undergoing elective cataract surgery under monitored anesthesia care, aged between 43 and 78 years, were randomly assigned to three groups: retrobulbar block (group R), sub-Tenon block (group S), or topical anesthesia (group T). Three minutes after the start of monitored anesthesia care with lidocaine-propofol-remifentanil mixture, an ophthalmologist performed regional anesthesia. Intraoperative hemodynamics, pain score, and patients' satisfaction with the anesthetic experiences were recorded by a study-blinded anesthesiologist. Mean arterial pressure and heart rate in group R were significantly higher than those in groups S and T during and just after the regional block (p<0.05). Group R required smaller dosage of patient controlled sedation and fewer supplemental bolus doses than groups S and T (p<0.05). On the other hand, group S showed the highest satisfaction scores among the three groups (p<0.05). Sub-Tenon block seems to be better than retrobulbar block and topical anesthesia in patient satisfaction though adequate analgesia was achieved after retrobulbar block during cataract surgery under monitored anesthesia care.

Collapse transitions in thermosensitive multi-block copolymers: A Monte Carlo study

NASA Astrophysics Data System (ADS)

Rissanou, Anastassia N.; Tzeli, Despoina S.; Anastasiadis, Spiros H.; Bitsanis, Ioannis A.

2014-05-01

Monte Carlo simulations are performed on a simple cubic lattice to investigate the behavior of a single linear multiblock copolymer chain of various lengths N. The chain of type (AnBn)m consists of alternating A and B blocks, where A are solvophilic and B are solvophobic and N = 2nm. The conformations are classified in five cases of globule formation by the solvophobic blocks of the chain. The dependence of globule characteristics on the molecular weight and on the number of blocks, which participate in their formation, is examined. The focus is on relative high molecular weight blocks (i.e., N in the range of 500-5000 units) and very differing energetic conditions for the two blocks (very good—almost athermal solvent for A and bad solvent for B). A rich phase behavior is observed as a result of the alternating architecture of the multiblock copolymer chain. We trust that thermodynamic equilibrium has been reached for chains of N up to 2000 units; however, for longer chains kinetic entrapments are observed. The comparison among equivalent globules consisting of different number of B-blocks shows that the more the solvophobic blocks constituting the globule the bigger its radius of gyration and the looser its structure. Comparisons between globules formed by the solvophobic blocks of the multiblock copolymer chain and their homopolymer analogs highlight the important role of the solvophilic A-blocks.

Evaluation of long-term stability of low thermal expansion coefficient materials using gauge block interferometers

NASA Astrophysics Data System (ADS)

Hirai, Akiko; Bitou, Youichi; Oike, Yoshiyuki

2018-06-01

The long-term stability of NEXCERA™ ceramics having a low coefficient of thermal expansion was evaluated over a period of eight years. Several gauge blocks of differing lengths were prepared, using two types of NEXCERA. Each gauge block was kept wrung to a platen and its absolute length was periodically measured by gauge block interferometer during the eight years. Relative uncertainties of measurement of changes in gauge block length were estimated as 4.1  ×  10‑8 and 2.9  ×  10‑8 for 200 mm and 800 mm gauge blocks, respectively. The experimental results show the trend of expansion and a relative change of less than 0.1  ×  10‑6/year for every gauge block.

Proximal Interphalangeal Joint Extension Block Splint

PubMed Central

Abboudi, Jack; Jones, Christopher M.

2016-01-01

Background: Extension block splinting of the proximal interphalangeal (PIP) joint is a simple and useful treatment option although the practical application of this technique has remained undefined in the literature. Methods: This article provides a step-by-step technique for the construction of a reliable PIP extension block splint and also reviews basic indications for treatment with a PIP extension block splint as well as other PIP extension block splint designs. Results: The proposed splint design outlined in this article is reliable, easy to reproduce and easy for patients to manage when treated with a PIP extension block splint. Conclusions: PIP extension block splinting has a role for certain injuries and certain post-operative protocols. A reliable splint design that is easy to manage makes this treatment choice more attractive to the surgeon and the patient. PMID:27390555

A multiple-block multigrid method for the solution of the three-dimensional Euler and Navier-Stokes equations

NASA Technical Reports Server (NTRS)

Atkins, Harold

1991-01-01

A multiple block multigrid method for the solution of the three dimensional Euler and Navier-Stokes equations is presented. The basic flow solver is a cell vertex method which employs central difference spatial approximations and Runge-Kutta time stepping. The use of local time stepping, implicit residual smoothing, multigrid techniques and variable coefficient numerical dissipation results in an efficient and robust scheme is discussed. The multiblock strategy places the block loop within the Runge-Kutta Loop such that accuracy and convergence are not affected by block boundaries. This has been verified by comparing the results of one and two block calculations in which the two block grid is generated by splitting the one block grid. Results are presented for both Euler and Navier-Stokes computations of wing/fuselage combinations.

ETARA - EVENT TIME AVAILABILITY, RELIABILITY ANALYSIS

NASA Technical Reports Server (NTRS)

Viterna, L. A.

1994-01-01

The ETARA system was written to evaluate the performance of the Space Station Freedom Electrical Power System, but the methodology and software can be modified to simulate any system that can be represented by a block diagram. ETARA is an interactive, menu-driven reliability, availability, and maintainability (RAM) simulation program. Given a Reliability Block Diagram representation of a system, the program simulates the behavior of the system over a specified period of time using Monte Carlo methods to generate block failure and repair times as a function of exponential and/or Weibull distributions. ETARA can calculate availability parameters such as equivalent availability, state availability (percentage of time at a particular output state capability), continuous state duration and number of state occurrences. The program can simulate initial spares allotment and spares replenishment for a resupply cycle. The number of block failures are tabulated both individually and by block type. ETARA also records total downtime, repair time, and time waiting for spares. Maintenance man-hours per year and system reliability, with or without repair, at or above a particular output capability can also be calculated. The key to using ETARA is the development of a reliability or availability block diagram. The block diagram is a logical graphical illustration depicting the block configuration necessary for a function to be successfully accomplished. Each block can represent a component, a subsystem, or a system. The function attributed to each block is considered for modeling purposes to be either available or unavailable; there are no degraded modes of block performance. A block does not have to represent physically connected hardware in the actual system to be connected in the block diagram. The block needs only to have a role in contributing to an available system function. ETARA can model the RAM characteristics of systems represented by multilayered, nesting block diagrams. There are no restrictions on the number of total blocks or on the number of blocks in a series, parallel, or M-of-N parallel subsystem. In addition, the same block can appear in more than one subsystem if such an arrangement is necessary for an accurate model. ETARA 3.3 is written in APL2 for IBM PC series computers or compatibles running MS-DOS and the APL2 interpreter. Hardware requirements for the APL2 system include 640K of RAM, 2Mb of extended memory, and an 80386 or 80486 processor with an 80x87 math co-processor. The standard distribution medium for this package is a set of two 5.25 inch 360K MS-DOS format diskettes. A sample executable is included. The executable contains licensed material from the APL2 for the IBM PC product which is program property of IBM; Copyright IBM Corporation 1988 - All rights reserved. It is distributed with IBM's permission. The contents of the diskettes are compressed using the PKWARE archiving tools. The utility to unarchive the files, PKUNZIP.EXE, is included. ETARA was developed in 1990 and last updated in 1991.

Morphological and physical characterization of poly(styrene-isobutylene-styrene) block copolymers and ionomers thereof

NASA Astrophysics Data System (ADS)

Baugh, Daniel Webster, III

Poly(styrene-isobutylene-styrene) block copolymers made by living cationic polymerization using a difunctional initiator and the sequential monomer addition technique were analyzed using curve-resolution software in conjunction with high-resolution GPC. Fractional precipitation and selective solvent extraction were applied to a representative sample in order to confirm the identity of contaminating species. The latter were found to be low molecular weight polystyrene homopolymer, diblock copolymer, and higher molecular weight segmented block copolymers formed by intermolecular electrophilic aromatic substitution linking reactions occurring late in the polymerization of the styrene outer blocks. Solvent-cast films of poly(styrene-isobutylene-styrene) (PS-PIB-PS) block copolymers and block ionomers were analyzed using small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). Four block copolymer samples with center block molecular weights of 52,000 g/mol and PS volume fractions (o sbPS) ranging from 0.17 to 0.31 were studied. All samples exhibited hexagonally packed cylinders of PS within the PIB matrix. Cylinder spacing was in the range 32 to 36 nm for most samples, while cylinder diameters varied from 14 to 21 nm. Porod analysis of the scattering data indicated the presence of isolated phase mixing and sharp phase boundaries. PS-PIB-PS block copolymers and ionomers therefrom were analyzed using dynamic mechanical analysis (DMA) and tensile testing. The study encompassed five block copolymer samples with similar PIB center blocks with molecular weights of approx52,000 g/mol and PS weight fractions ranging from 0.127 to 0.337. Ionomers were prepared from two of these materials by lightly sulfonating the PS outer blocks. Sulfonation levels varied from 1.7 to 4.7 mol % and the sodium and potassium neutralized forms were compared to the parent block copolymers. Dynamic mechanical analysis (DMA) of the block copolymer films indicated the existence of a third phase attributed to PIB chains near the PS domain interface which experience reduced mobility due to their firm attachment to the hard PS domain. The relative amount of this phase decreased in samples with larger PS blocks, while the temperature of the associated transition increased. Tensile testing showed increased tensile strength but decreased elongation at break with larger PS blocks. DMA of the ionomers indicated improved dynamic modulus at temperatures above 100spcirc$C. Tensile testing of the ionomers indicated slight improvements in tensile strength with little loss in elongation at break. PS-PIB-PS block copolymer ionomer (BCP01, center block molecular weight = 53,000 g/mole; 25.5 wt % polystyrene, 4.7% sulfonation of phenyl units, 100% neutralized with KOH) was compounded with various organic and inorganic acid salts of 2-ethylhexyl-p-dimethyl aminobenzoate (ODAB) to explore the efficacy of these compounds as ionic plasticizers. (Abstract shortened by UMI.)

High-Performance Polymer Solar Cell with Single Active Material of Fully Conjugated Block Copolymer Composed of Wide-Band gap Donor and Narrow-Band gap Acceptor Blocks.

PubMed

Lee, Ji Hyung; Park, Chang Geun; Kim, Aesun; Kim, Hyung Jong; Kim, Youngseo; Park, Sungnam; Cho, Min Ju; Choi, Dong Hoon

2018-06-06

We synthesized a novel fully conjugated block copolymer, P3, in which a wide-band gap donor block (P1) was connected to a narrow-band gap acceptor block (P2). As P3 contains P1 block with a wide bandgap and P2 block with a narrow bandgap, it exhibits a very wide complementary absorption. Transient photoluminescence measurement using P3 dilute solution demonstrated intramolecular charge transfer between the P1 block and the P2 block, which was not observed in a P1/P2 blend solution. A P3 thin film showed complete PL quenching because the photoinduced inter-/intramolecular charge transfer states were effectively formed. This phenomenon can play an important role in the photovoltaic properties of P3-based polymer solar cells. A single active material polymer solar cell (SAMPSC) fabricated from P3 alone exhibited a high power conversion efficiency (PCE) of 3.87% with a high open-circuit voltage of 0.93 V and a short-circuit current of 8.26 mA/cm 2 , demonstrating a much better performance than a binary P1-/P2-based polymer solar cell (PCE = 1.14%). This result facilitates the possible improvement of the photovoltaic performance of SAMPSCs by inducing favorable nanophase segregation between p- and n blocks. In addition, owing to the high morphological stability of the block copolymer, excellent shelf-life was observed in a P3-based SAMPSC compared with a P1/P2-based PSC.

Dynamics of Disordered PI-PtBS Diblock Copolymer

NASA Astrophysics Data System (ADS)

Watanabe, Hiroshi

2009-03-01

Viscoelastic (G^*) and dielectric (ɛ'') data were examined for a LCST-type diblock copolymer composed of polyisoprene (PI; M = 53K) and poly(p-tert- butyl styrene) (PtBS; M = 42K) blocks disordered at T <=120 C^o. Only PI had the type-A dipole parallel along the chain backbone. Thus, the ɛ'' data reflected the global motion of the PI block, while the G^* data detected the motion of the copolymer chain as a whole. Comparison of these data indicated that the PI block relaxed much faster than the PtBS block at low T and the dynamic heterogeneity due to PtBS was effectively quenched to give a frictional nonuniformity for the PI block relaxation. The ɛ'' data were thermo-rheologically complex at low T, partly due to this nonuniformity. However, the block connectivity could have also led to the complexity. For testing this effect, the ɛ'' data were reduced at the iso- frictional state defined with respect to bulk PI. In this state, the ɛ'' data of the copolymer at low and high T, respectively, were close to the data for the star-branched and linear bulk PI. Thus, the PI block appeared to be effectively tethered in space at low T thereby behaving similarly to the star arm while the PI block tended to move cooperatively with the PtBS block at high T to behave similarly to the linear PI, which led to the complexity of the ɛ'' data. The PtBS block also exhibited the complexity (noted from the G^* data), which was well correlated with the complexity of the PI block.

Production of sludge-incorporated paver blocks for efficient waste management.

PubMed

Velumani, P; Senthilkumar, S

2018-06-01

Waste management plays a vital role in the reuse of industry wastes in to useful conversions. The treatment of effluents from the combined textile effluent treatment plant and hypo sludge from the paper industry results in sludge generation, which poses a huge challenge for its disposal. Therefore, an eco-friendly attempt is made to utilize them in the production of paver blocks. Paver blocks are construction units that have vast applications in street roads, walking paths, fuel stations, and so on. In this study, an innovative attempt has been made to manufacture paver blocks incorporating textile effluent treatment plant sludge and hypo sludge, to utilize them in suitable proportions. The effect of adding silica fume and polypropylene fibre in paver blocks has also been studied. Paver blocks containing sludge with different proportions were cast based on the recommendations in Indian Standards (IS) 15658, and the test results were compared with the nominal M20 grade and M30 grade paver blocks. The outcomes of the paver block combinations were studied and found to be an effective utilization of sludge with substantial cement replacement of up to 35%, resulting in effective waste management for specific industries. Presently, paver blocks are construction units that have vast application in street roads and other constructions like walking paths, fuel stations, and so on. Also, paver blocks possess easy maintenance during breakages. Based on this application, an innovative attempt has been made to manufacture paver blocks incorporating textile effluent treatment plant sludge and hypo sludge to utilize them in suitable proportions.

Utility of Cytospin and Cell block Technology in Evaluation of Body Fluids and Urine Samples: A Comparative Study

PubMed Central

Qamar, Irmeen; Rehman, Suhailur; Mehdi, Ghazala; Maheshwari, Veena; Ansari, Hena A.; Chauhan, Sunanda

2018-01-01

Background: Cytologic examination of body fluids commonly involves the use of direct or sediment smears, cytocentrifuge preparations, membrane filter preparations, or cell block sections. Cytospin and cell block techniques are extremely useful in improving cell yield of thin serous effusions and urine samples, and ensure high diagnostic efficacy. Materials and Methods: We studied cytospin preparations and cell block sections prepared from 180 samples of body fluids and urine samples to compare the relative efficiency of cell retrieval, preservation of cell morphology, ease of application of special stains, and diagnostic efficacy. Samples were collected and processed to prepare cytospin smears and cell block sections. Results: We observed that overall, cell yield and preservation of individual cell morphology were better in cytospin preparations as compared to cell blocks, while preservation of architectural pattern was better in cell block sections. The number of suspicious cases also decreased on cell block sections, with increased detection of malignancy. It was difficult to prepare cell blocks from urine samples due to low cellularity. Conclusions: Cytospin technology is a quick, efficient, and cost-effective method of increasing cell yield in hypocellular samples, with better preservation of cell morphology. Cell blocks are better prepared from high cellularity fluids; however, tissue architecture is better studied, with improved rate of diagnosis and decrease in ambiguous results. Numerous sections can be prepared from a small amount of material. Special stains and immunochemical stains can be easily applied to cell blocks. It also provides a source of archival material. PMID:29643653

[Interest of ultrasonographic guidance in paediatric regional anaesthesia].

PubMed

Dadure, C; Raux, O; Rochette, A; Capdevila, X

2009-10-01

The use of ultrasonographic guidance for regional anaesthesia has known recently a big interest in children in recent years. The linear ultrasound probes with a 25 mm active surface area (or probes with 38 mm active surface area in older children), with high sound frequencies in the range 8-14 MHz, allow a good compromise between excellent resolution for superficial structure and good penetration depths. In children, the easiest ultrasound guided blocks are axillar blocks, femoral blocks, fascia iliaca compartment blocks, ilio-inguinal blocks and para-umbilical blocks, caudal blocks. They permit a safe and easy learning curve of these techniques. The main advantage of ultrasound guided regional anaesthesia is the visualization of different anatomical structures and the approximate localization of the tip of needle. The other advantages for ultrasound guided peripheral nerve blocks in children are: faster onset time of sensory and motor block, longer duration of sensory blockade, increase of blockade quality and reduction of local anesthetic injection. The use of ultrasonographic guidance for central block allows to visualize different structures as well as spine and his content. Spinous process, ligament flavum, dura mater, conus medullaris and cerebrospinal fluid are identifiable, and give some information on spine, epidural space and the depth between epidural space and skin. At last, in caudal block, ultrasounds permit to evaluate the anatomy of caudal epidural space, especially the relation of the sacral hiatus to the dural sac and the search of occult spinal dysraphism. Benefit of this technique is the visualization of targeted nerves or spaces and the spread of injected local anaesthetic.

The Resolution Sensitivity of Northern Hemisphere Blocking in Four 25-km Atmospheric Global Circulation Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schiemann, Reinhard; Demory, Marie-Estelle; Shaffrey, Len C.

The aim of this study is to investigate if the representation of Northern Hemisphere blocking is sensitive to resolution in current-generation atmospheric global circulation models (AGCMs). An evaluation is thus conducted of how well atmospheric blocking is represented in four AGCMs whose horizontal resolution is increased from a grid spacing of more than 100 km to about 25 km. It is shown that Euro-Atlantic blocking is simulated overall more credibly at higher resolution (i.e., in better agreement with a 50-yr reference blocking climatology created from the reanalyses ERA-40 and ERA-Interim). The improvement seen with resolution depends on the season andmore » to some extent on the model considered. Euro-Atlantic blocking is simulated more realistically at higher resolution in winter, spring, and autumn, and robustly so across the model ensemble. The improvement in spring is larger than that in winter and autumn. Summer blocking is found to be better simulated at higher resolution by one model only, with little change seen in the other three models. The representation of Pacific blocking is not found to systematically depend on resolution. Despite the improvements seen with resolution, the 25-km models still exhibit large biases in Euro-Atlantic blocking. For example, three of the four 25-km models underestimate winter northern European blocking frequency by about one-third. The resolution sensitivity and biases in the simulated blocking are shown to be in part associated with the mean-state biases in the models' midlatitude circulation.« less

Impact of Atmospheric Blocking on South America in Austral Summer

NASA Astrophysics Data System (ADS)

Rodrigues, Regina; Woollings, Tim

2017-04-01

In this study, we investigate atmospheric blocking over east South America in austral summer for the period of 1979-2014. Our results show that blocking over this area is a consequence of propagating Rossby waves that grow to large amplitudes and eventually break anticyclonically over subtropical South America (SSA). The SSA blocking can prevent the establishment of the South Atlantic Convergence Zone (SACZ). As such, years with more blocking days coincide with years with fewer SACZ days and reduced precipitation. Convection mainly over the Indian Ocean associated with Madden-Julian Oscillation (MJO) phases 1 and 2 can trigger the wave train that leads to SSA blocking whereas convection over the western/central Pacific associated with phases 6 and 7 is more likely to lead to SACZ events. We find that MJO is a key source of long-term variability in SSA blocking frequency. The wave packets associated with SSA blocking and SACZ episodes differ not only in their origin but also in their phase and refraction pattern. The tropopause-based methodology used here is proven to reliably identify events that lead to extremes of surface temperature and precipitation over SSA. Up to 80% of warm surface air temperature extremes occur simultaneously with SSA blocking events. They are also responsible for the warming of western South Atlantic. The frequency of SSA blocking days is highly anti-correlated with the rainfall over southeast Brazil. The worst droughts in this area, during the summers of 1984, 2001 and 2014, are linked to record high numbers of SSA blocking days. The persistence of these events is also important in generating the extreme impacts.

The Resolution Sensitivity of Northern Hemisphere Blocking in Four 25-km Atmospheric Global Circulation Models

DOE PAGES

Schiemann, Reinhard; Demory, Marie-Estelle; Shaffrey, Len C.; ...

2016-12-19

The aim of this study is to investigate if the representation of Northern Hemisphere blocking is sensitive to resolution in current-generation atmospheric global circulation models (AGCMs). An evaluation is thus conducted of how well atmospheric blocking is represented in four AGCMs whose horizontal resolution is increased from a grid spacing of more than 100 km to about 25 km. It is shown that Euro-Atlantic blocking is simulated overall more credibly at higher resolution (i.e., in better agreement with a 50-yr reference blocking climatology created from the reanalyses ERA-40 and ERA-Interim). The improvement seen with resolution depends on the season andmore » to some extent on the model considered. Euro-Atlantic blocking is simulated more realistically at higher resolution in winter, spring, and autumn, and robustly so across the model ensemble. The improvement in spring is larger than that in winter and autumn. Summer blocking is found to be better simulated at higher resolution by one model only, with little change seen in the other three models. The representation of Pacific blocking is not found to systematically depend on resolution. Despite the improvements seen with resolution, the 25-km models still exhibit large biases in Euro-Atlantic blocking. For example, three of the four 25-km models underestimate winter northern European blocking frequency by about one-third. The resolution sensitivity and biases in the simulated blocking are shown to be in part associated with the mean-state biases in the models' midlatitude circulation.« less

How do blockings relate to heavy precipitation events in Europe?

NASA Astrophysics Data System (ADS)

Lenggenhager, Sina; Romppainen, Olivia; Brönnimann, Stefan; Croci-Maspoli, Mischa

2017-04-01

Atmospheric blockings are quasi-stationary high pressure systems that persist for several days. Due to their longevity, blockings can be key features for extreme weather events. While several studies have shown their relevant role for temperatures extremes, the link between blockings and extreme precipitation and floods is still poorly understood. A case study of a Swiss lake flood event in the year 2000 reveals how different processes connected to blockings can favour the development of a flood. First upstream blocks helped to form strongly elongated troughs that are known to be associated with heavy precipitation events south of the Alps. Second recurrent precipitation events upstream of a block led to a moistening of the catchment and an increase of the lake level. Third the progression of the upstream weather systems was slowed and thereby the precipitation period over a catchment prolonged. Additionally, cloud diabatic processes in the flood region contributed to the establishment and maintenance of blocking anticyclones. Based on this case study we extend our analysis to all of Europe. Focusing on flood relevant precipitation events, i.e. extreme precipitation events that last for several days and affect larger areas, we show that different regions in Europe have very distinct seasonal precipitation patterns. Hence there is a strong seasonality in the occurrence of extreme events, depending on the geographical region. We further suggest that for different precipitation regimes, the preferred location of blockings varies strongly. Heavy precipitation events in southern France, for example, are often observed during Scandinavian blockings, while heavy precipitation events in south-eastern Europe coincide more often with eastern North-Atlantic blockings.

How Much Volume of Local Anesthesia and How Long Should You Wait After Injection for an Effective Wrist Median Nerve Block?

PubMed

Lovely, Lyndsay M; Chishti, Yasmin Z; Woodland, Jennifer L; Lalonde, Donald H

2018-05-01

Many surgeons and emergentologists use non-ultrasound-guided wrist nerve blocks. There is little evidence to guide the ideal volume of local anesthesia or how long we should wait after injection before performing pain-free procedures. This pilot study examined time to maximal anesthesia to painful needle stick in 14 volunteer participants receiving bilateral wrist blocks of 6 versus 11 mL of local. One surgeon performed all 14 bilateral wrist median nerve blocks in participants who remained blinded until after bandages were applied to their wrist. No one could see which wrist received the larger 11-mL volume injection versus the 6-mL block. Blinded sensory assessors then measured perceived maximal numbness time and numbness to needle stick pain in the fingertips of the median nerve distribution. Failure to get a complete median nerve block occurred in seven of fourteen 6-mL wrist blocks versus failure in only one of fourteen 11-mL blocks. Perceived maximal numbness occurred at roughly 40 minutes after injection, but actual numbness to painful needle stick took around 100 minutes. Incomplete median nerve numbness occurred with both 6- and 11-mL non-ultrasound-guided blocks at the wrist. In those with complete blocks, it took a surprisingly long time of 100 minutes for maximal anesthesia to occur to painful needle stick stimuli to the fingertips of the median nerve distribution. Non-ultrasound-guided median nerve blocks at the wrist as described in this article lack reliability and take too long to work.

Diaphragm-Sparing Nerve Blocks for Shoulder Surgery.

PubMed

Tran, De Q H; Elgueta, Maria Francisca; Aliste, Julian; Finlayson, Roderick J

Shoulder surgery can result in significant postoperative pain. Interscalene brachial plexus blocks (ISBs) constitute the current criterion standard for analgesia but may be contraindicated in patients with pulmonary pathology due to the inherent risk of phrenic nerve block and symptomatic hemidiaphragmatic paralysis. Although ultrasound-guided ISB with small volumes (5 mL), dilute local anesthetic (LA) concentrations, and LA injection 4 mm lateral to the brachial plexus have been shown to reduce the risk of phrenic nerve block, no single intervention can decrease its incidence below 20%. Ultrasound-guided supraclavicular blocks with LA injection posterolateral to the brachial plexus may anesthetize the shoulder without incidental diaphragmatic dysfunction, but further confirmatory trials are required. Ultrasound-guided C7 root blocks also seem to offer an attractive, diaphragm-sparing alternative to ISB. However, additional large-scale studies are needed to confirm their efficacy and to quantify the risk of periforaminal vascular breach. Combined axillary-suprascapular nerve blocks may provide adequate postoperative analgesia for minor shoulder surgery but do not compare favorably to ISB for major surgical procedures. One intriguing solution lies in the combined use of infraclavicular brachial plexus blocks and suprascapular nerve blocks. Theoretically, the infraclavicular approach targets the posterior and lateral cords, thus anesthetizing the axillary nerve (which supplies the anterior and posterior shoulder joint), as well as the subscapular and lateral pectoral nerves (both of which supply the anterior shoulder joint), whereas the suprascapular nerve block anesthetizes the posterior shoulder. Future randomized trials are required to validate the efficacy of combined infraclavicular-suprascapular blocks for shoulder surgery.

47 CFR 24.716 - Installment payments for licenses for frequency Block F.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Block F. 24.716 Section 24.716 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON....716 Installment payments for licenses for frequency Block F. Installment Payments. Each eligible licensee of frequency Block F may pay the remaining 80 percent of the net auction price for the license in...

75 FR 20269 - Regulatory Reporting Requirements for the Indian Community Development Block Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-19

...-AC79 Regulatory Reporting Requirements for the Indian Community Development Block Grant Program AGENCY... final rule revises the reporting requirements for the Indian Community Development Block Grants (ICDBG... Indian Community Development Block Grant (ICDBG) program. The purpose of the ICDBG program is the...

49 CFR 236.504 - Operation interconnected with automatic block-signal system.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Operation interconnected with automatic block... Operation interconnected with automatic block-signal system. (a) A continuous inductive automatic train stop or train control system shall operate in connection with an automatic block signal system and shall...

49 CFR 236.708 - Block.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Block. 236.708 Section 236.708 Transportation... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.708 Block. A length of track of defined limits, the use of which by trains is governed by block signals, cab signals, or both. ...

47 CFR 24.711 - Installment payments for licenses for frequency Block C.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Block C. 24.711 Section 24.711 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON....711 Installment payments for licenses for frequency Block C. Installment payments. Each eligible licensee of frequency Block C may pay the remaining 90 percent of the net auction price for the license in...

21 CFR 882.5070 - Bite block.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Bite block. 882.5070 Section 882.5070 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES NEUROLOGICAL DEVICES Neurological Therapeutic Devices § 882.5070 Bite block. (a) Identification. A bite block...

Naming Block Structures: A Multimodal Approach

ERIC Educational Resources Information Center

Cohen, Lynn; Uhry, Joanna

2011-01-01

This study describes symbolic representation in block play in a culturally diverse suburban preschool classroom. Block play is "multimodal" and can allow children to experiment with materials to represent the world in many forms of literacy. Combined qualitative and quantitative data from seventy-seven block structures were collected and analyzed.…

75 FR 81286 - Emergency Comment Request; Indian Housing Block Grants (IHBG) Program Reporting; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

...; Indian Housing Block Grants (IHBG) Program Reporting; Notice of Submission of Proposed Information... information: Title of Proposal: Indian Housing Block Grants (IHBG) Program Reporting. Description of Information Collection: Recipients of Indian Housing Block Grant (IHBG) funds provide plans for low-income...

49 CFR 236.502 - Automatic brake application, initiation by restrictive block conditions stopping distance in...

Code of Federal Regulations, 2010 CFR

2010-10-01

... restrictive block conditions stopping distance in advance. 236.502 Section 236.502 Transportation Other... Cab Signal Systems Standards § 236.502 Automatic brake application, initiation by restrictive block... initiate an automatic brake application at least stopping distance from the entrance to a block, wherein...

77 FR 9655 - Mobility Fund Phase I Auction Updated List of Potentially Eligible Census Blocks

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-17

... Updated List of Potentially Eligible Census Blocks AGENCY: Federal Communications Commission. ACTION... Bureaus provide an updated list of potentially eligible census blocks for Auction 901 scheduled to... summary of the Mobility Fund Phase I Auction Updated List of Potentially Eligible Census Blocks Public...

Building Curriculum during Block Play

ERIC Educational Resources Information Center

Andrews, Nicole

2015-01-01

Blocks are not just for play! In this article, Nicole Andrews describes observing the interactions of three young boys enthusiastically engaged in the kindergarten block center of their classroom, using blocks in a building project that displayed their ability to use critical thinking skills, physics exploration, and the development of language…

77 FR 24508 - Notice of Submission of Proposed Information Collection to OMB Community Development Block Grant...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-24

... Proposed Information Collection to OMB Community Development Block Grant (CDBG) Entitlement Program AGENCY... subject proposal. The closeout instructions apply to Community Development Block Grant (CDBG) programs... responses. This notice also lists the following information: Title of Proposal: Community Development Block...

77 FR 24139 - State Community Development Block Grant Program: Administrative Rule Changes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-23

...-AC22 State Community Development Block Grant Program: Administrative Rule Changes AGENCY: Office of the... rule makes changes to several sections of the regulations for the Community Development Block Grant... ``Community Development Block Grants''). Under the State CDBG program, states have the opportunity to...

76 FR 27341 - Notice of Proposed Information Collection for Public Comment; Indian Housing Block Grant (IHBG...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-11

... Information Collection for Public Comment; Indian Housing Block Grant (IHBG) Program Reporting AGENCY: Office... lists the following information: Title of Proposal: Indian Housing Block Grant Information Collection... Housing Block Grant (IHBG) funds are required annually to submit HUD-52737--the Indian Housing Plan...

45 CFR 96.112 - Community services block grant.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Community services block grant. 96.112 Section 96.112 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION BLOCK GRANTS Transition Provisions § 96.112 Community services block grant. (a) For the fiscal year beginning October 1...

21 CFR 882.5070 - Bite block.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Bite block. 882.5070 Section 882.5070 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES NEUROLOGICAL DEVICES Neurological Therapeutic Devices § 882.5070 Bite block. (a) Identification. A bite block...

Block 3. Central view of Block 3 observed from the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Block 3. Central view of Block 3 observed from the west to the east. This photograph reveals the alignment of trees within the central path of the park. In addition, this photograph exposes broken bricks aligning tree beds - Skyline Park, 1500-1800 Arapaho Street, Denver, Denver County, CO

Blockbusters: Ideas for the Block Center.

ERIC Educational Resources Information Center

Adams, Polly K.; Nesmith, Jaynie

1996-01-01

Goals of block building in early childhood classrooms focus on physical, social, cognitive, and emotional development. Reports survey results of the value teachers place on block play. Offers illustrations of task cards to use with blocks in math, language arts, social studies, and science. Discusses guidelines and suggests idea cards and sentence…

31 CFR 500.526 - Transactions involving blocked life insurance policies.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transactions involving blocked life... blocked life insurance policies. (a) The following transactions are hereby authorized: (1) The payment of premiums and interest on policy loans with respect to any blocked life insurance policy; (2) The issuance...

31 CFR 515.526 - Transactions involving blocked life insurance policies.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transactions involving blocked life... blocked life insurance policies. (a) The following transactions are hereby authorized: (1) The payment of premiums and interest on policy loans with respect to any blocked life insurance policy; (2) The issuance...

30 CFR 77.1505 - Auger holes; blocking.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Auger holes; blocking. 77.1505 Section 77.1505 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH... § 77.1505 Auger holes; blocking. Auger holes shall be blocked with highwall spoil or other suitable...

30 CFR 77.1505 - Auger holes; blocking.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Auger holes; blocking. 77.1505 Section 77.1505 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH... § 77.1505 Auger holes; blocking. Auger holes shall be blocked with highwall spoil or other suitable...

30 CFR 77.1505 - Auger holes; blocking.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Auger holes; blocking. 77.1505 Section 77.1505 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH... § 77.1505 Auger holes; blocking. Auger holes shall be blocked with highwall spoil or other suitable...

30 CFR 77.1505 - Auger holes; blocking.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Auger holes; blocking. 77.1505 Section 77.1505 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH... § 77.1505 Auger holes; blocking. Auger holes shall be blocked with highwall spoil or other suitable...

An Analysis of Research on Block Scheduling

ERIC Educational Resources Information Center

Zepeda, Sally J.; Mayers, R. Stewart

2006-01-01

In this analysis of 58 empirical studies of high school block scheduling, the authors report findings in and across five groupings. Within groups, data were inconsistent regarding whether teachers' practices changed, but teachers believed that staff development was necessary to teach in a block schedule. Block scheduling appeared to increase…

30 CFR 56.19079 - Blocking mine cars.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Blocking mine cars. 56.19079 Section 56.19079... Hoisting Procedures § 56.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

30 CFR 57.19079 - Blocking mine cars.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Blocking mine cars. 57.19079 Section 57.19079... Hoisting Procedures § 57.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

30 CFR 57.19079 - Blocking mine cars.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Blocking mine cars. 57.19079 Section 57.19079... Hoisting Procedures § 57.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

30 CFR 57.19079 - Blocking mine cars.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Blocking mine cars. 57.19079 Section 57.19079... Hoisting Procedures § 57.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

30 CFR 56.19079 - Blocking mine cars.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Blocking mine cars. 56.19079 Section 56.19079... Hoisting Procedures § 56.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

30 CFR 56.19079 - Blocking mine cars.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Blocking mine cars. 56.19079 Section 56.19079... Hoisting Procedures § 56.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

30 CFR 56.19079 - Blocking mine cars.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Blocking mine cars. 56.19079 Section 56.19079... Hoisting Procedures § 56.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

30 CFR 57.19079 - Blocking mine cars.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Blocking mine cars. 57.19079 Section 57.19079... Hoisting Procedures § 57.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

30 CFR 57.19079 - Blocking mine cars.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Blocking mine cars. 57.19079 Section 57.19079... Hoisting Procedures § 57.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

30 CFR 56.19079 - Blocking mine cars.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Blocking mine cars. 56.19079 Section 56.19079... Hoisting Procedures § 56.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

21 CFR 892.5710 - Radiation therapy beam-shaping block.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Radiation therapy beam-shaping block. 892.5710... (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Therapeutic Devices § 892.5710 Radiation therapy beam-shaping block. (a) Identification. A radiation therapy beam-shaping block is a device made of a highly...

Standardized Curriculum for Brick, Block, and Stonemasonry.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: brick, block, and stonemasonry I and II. The six units in brick, block, and stonemasonry I are as follows: orientation and leadership activities; safety; basic tools and equipment; masonry units; mortar; and wall layout. Brick, block,…

SRA Real Math Building Blocks PreK. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2007

2007-01-01

"SRA Real Math Building Blocks PreK" (also referred to as "Building Blocks for Math") is a supplemental mathematics curriculum designed to develop preschool children's early mathematical knowledge through various individual and small- and large-group activities. It uses "Building Blocks for Math PreK" software,…

24 CFR 3285.304 - Pier configuration.

Code of Federal Regulations, 2010 CFR

2010-04-01

... configuration. (a) Concrete blocks. Installation instructions for concrete block piers must be developed in...-bearing (not decorative) concrete blocks must have nominal dimensions of at least 8 inches × 8 inches × 16 inches; (2) The concrete blocks must be stacked with their hollow cells aligned vertically; and (3) When...

30 CFR 77.1505 - Auger holes; blocking.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Auger holes; blocking. 77.1505 Section 77.1505 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH... § 77.1505 Auger holes; blocking. Auger holes shall be blocked with highwall spoil or other suitable...

17 CFR Appendix F to Part 43 - Initial Appropriate Minimum Block Sizes by Asset Class for Block Trades and Large Notional Off...

Code of Federal Regulations, 2014 CFR

2014-04-01

.... Light Sweet Crude Oil (NYMEX) 50,000 bbl. Live Cattle (CME) NO BLOCKS. Mid-Columbia Day-Ahead Off-Peak.... Sugar #11 (ICE and NYMEX) 5,000 metric tons. Sugar #16 (ICE) NO BLOCKS. Temperature Index (CME) 400...

31 CFR 593.301 - Blocked account; blocked property.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Blocked account; blocked property. 593.301 Section 593.301 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY FORMER LIBERIAN REGIME OF CHARLES TAYLOR...

31 CFR 593.301 - Blocked account; blocked property.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Blocked account; blocked property. 593.301 Section 593.301 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY FORMER LIBERIAN REGIME OF CHARLES TAYLOR...

31 CFR 593.301 - Blocked account; blocked property.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Blocked account; blocked property. 593.301 Section 593.301 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY FORMER LIBERIAN REGIME OF CHARLES TAYLOR...

31 CFR 593.301 - Blocked account; blocked property.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Blocked account; blocked property. 593.301 Section 593.301 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY FORMER LIBERIAN REGIME OF CHARLES TAYLOR...

21 CFR 177.1810 - Styrene block polymers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Styrene block polymers. 177.1810 Section 177.1810...) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as Basic Components of Single and Repeated Use Food Contact Surfaces § 177.1810 Styrene block polymers. The styrene block polymers identified in paragraph (a...

21 CFR 892.5710 - Radiation therapy beam-shaping block.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Radiation therapy beam-shaping block. 892.5710... (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Therapeutic Devices § 892.5710 Radiation therapy beam-shaping block. (a) Identification. A radiation therapy beam-shaping block is a device made of a highly...

21 CFR 892.5710 - Radiation therapy beam-shaping block.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Radiation therapy beam-shaping block. 892.5710... (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Therapeutic Devices § 892.5710 Radiation therapy beam-shaping block. (a) Identification. A radiation therapy beam-shaping block is a device made of a highly...

21 CFR 892.5710 - Radiation therapy beam-shaping block.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Radiation therapy beam-shaping block. 892.5710... (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Therapeutic Devices § 892.5710 Radiation therapy beam-shaping block. (a) Identification. A radiation therapy beam-shaping block is a device made of a highly...

47 CFR 52.20 - Thousands-block number pooling.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 3 2013-10-01 2013-10-01 false Thousands-block number pooling. 52.20 Section... (CONTINUED) NUMBERING Number Portability § 52.20 Thousands-block number pooling. (a) Definition. Thousands-block number pooling is a process by which the 10,000 numbers in a central office code (NXX) are...

Neutronic reactor

DOEpatents

Carleton, John T.

1977-01-25

A graphite-moderated nuclear reactor includes channels between blocks of graphite and also includes spacer blocks between adjacent channeled blocks with an axis of extension normal to that of the axis of elongation of the channeled blocks to minimize changes in the physical properties of the graphite as a result of prolonged neutron bombardment.

An Analysis of Instruction-Cached SIMD Computer Architecture

DTIC Science & Technology

1993-12-01

ASSEBLE SIMULATE SCHEDULE VERIFY :t og ... . .. ... V~JSRUCTONSFOR PECIIEDCOMPARE ASSEMBLEI SIMULATE Ift*U1II ~ ~ SCHEDULEIinw ;. & VERIFY...Cache to Place Blocks ................. 70 4.5.4 Step 4: Schedule Cache Blocks ............................. 70 4.5.5 Step 5: Store Cache Blocks...167 B.4 Scheduler .............................................. 167 B.4.1 Basic Block Definition

31 CFR 547.302 - Blocked account; blocked property.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Blocked account; blocked property. 547.302 Section 547.302 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY DEMOCRATIC REPUBLIC OF THE CONGO SANCTIONS...

31 CFR 547.302 - Blocked account; blocked property.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Blocked account; blocked property. 547.302 Section 547.302 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY DEMOCRATIC REPUBLIC OF THE CONGO SANCTIONS...

31 CFR 547.302 - Blocked account; blocked property.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Blocked account; blocked property. 547.302 Section 547.302 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY DEMOCRATIC REPUBLIC OF THE CONGO SANCTIONS...

31 CFR 547.302 - Blocked account; blocked property.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Blocked account; blocked property. 547.302 Section 547.302 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY DEMOCRATIC REPUBLIC OF THE CONGO SANCTIONS...

Salt-Induced Block Copolymer Micelles as Nanoreactors for the Formation of CdS Nanoparticles

DTIC Science & Technology

2001-11-01

or corona of micelles is presented. Poly(styrene-block-2-vinylpyridine) ( PS - b - P2VP ) and cadmium ions form aggregates of single micelles, called...ratio and block copolymer concentration in THF etc. EXPERIMENTAL DETAILS The synthesis of the PS - b - P2VP block copolymer was performed using sequential...nanoparticles: PS - b - P2VP block copolymer was dissolved in THF at different concentrations under vigorous stirring for 1 hour. Cd(Ac)2.2H 20 dissolved in a

Transient left septal fascicular block and left anterior fascicular block as a consequence of proximal subocclusion of the left anterior descending coronary artery.

PubMed

Pérez-Riera, Andrés Ricardo; Barbosa-Barros, Raimundo; Daminello-Raimundo, Rodrigo; de Abreu, Luiz Carlos; Nikus, Kjell

2018-04-19

The association of left anterior fascicular block (LAFB) with left septal fascicular block (LSFB) characterizes a left bifascicular block subtype rarely described in the literature, probably due to the fact that most researchers are not aware of the existence of the left septal fascicle. We describe a case with this transient intraventricular dromotropic disturbance due to left anterior descending coronary artery subocclusion. © 2018 Wiley Periodicals, Inc.

Island custom blocking technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carabetta, R.J.

The technique of Island blocking is being used more frequently since the advent of our new head and neck blocking techniques and the implementation of a newly devised lung protocol. The system presented affords the mould room personnel a quick and accurate means of island block fabrication without the constant remeasuring or subtle shifting to approximate correct placement. The cookie cutter is easily implemented into any department's existing block cutting techniques. The device is easily and inexpensively made either in a machine shop or acquired by contacting the author.

Sequential and simultaneous SLAR block adjustment. [spline function analysis for mapping

NASA Technical Reports Server (NTRS)

Leberl, F.

1975-01-01

Two sequential methods of planimetric SLAR (Side Looking Airborne Radar) block adjustment, with and without splines, and three simultaneous methods based on the principles of least squares are evaluated. A limited experiment with simulated SLAR images indicates that sequential block formation with splines followed by external interpolative adjustment is superior to the simultaneous methods such as planimetric block adjustment with similarity transformations. The use of the sequential block formation is recommended, since it represents an inexpensive tool for satisfactory point determination from SLAR images.

Concrete Block Pavements

DTIC Science & Technology

1983-03-01

concrete paving block ( Van der Vlist 1980). The concrete paving block was readily accepted as a substitute for the scarce paving brick and today has...seen in Figure 4, its growth.has been steady ( Van der Vlist 1980). 20 15 0< 0. n 10 1𔃺 978 960 1 62 63 64 65 66 67 68 6970 71 72 73 74 7678 7778 79...Figure 4. Concrete paving block production in the Netherlands ( Van der Vlist 1980) 8. The use of concrete paving block in the Netherlands developedI

Self-assembly of block copolymers on topographically patterned polymeric substrates

DOEpatents

Russell, Thomas P.; Park, Soojin; Lee, Dong Hyun; Xu, Ting

2016-05-10

Highly-ordered block copolymer films are prepared by a method that includes forming a polymeric replica of a topographically patterned crystalline surface, forming a block copolymer film on the topographically patterned surface of the polymeric replica, and annealing the block copolymer film. The resulting structures can be used in a variety of different applications, including the fabrication of high density data storage media. The ability to use flexible polymers to form the polymeric replica facilitates industrial-scale processes utilizing the highly-ordered block copolymer films.

Protein based Block Copolymers

PubMed Central

Rabotyagova, Olena S.; Cebe, Peggy; Kaplan, David L.

2011-01-01

Advances in genetic engineering have led to the synthesis of protein-based block copolymers with control of chemistry and molecular weight, resulting in unique physical and biological properties. The benefits from incorporating peptide blocks into copolymer designs arise from the fundamental properties of proteins to adopt ordered conformations and to undergo self-assembly, providing control over structure formation at various length scales when compared to conventional block copolymers. This review covers the synthesis, structure, assembly, properties, and applications of protein-based block copolymers. PMID:21235251

Pectoral nerve block (Pecs block) with sedation for breast conserving surgery without general anesthesia

PubMed Central

Moon, Eun-Jin; Kim, Seung-Beom; Chung, Jun-Young; Song, Jeong-Yoon

2017-01-01

Most regional anesthesia in breast surgeries is performed as postoperative pain management under general anesthesia, and not as the primary anesthesia. Regional anesthesia has very few cardiovascular or pulmonary side-effects, as compared with general anesthesia. Pectoral nerve block is a relatively new technique, with fewer complications than other regional anesthesia. We performed Pecs I and Pec II block simultaneously as primary anesthesia under moderate sedation with dexmedetomidine for breast conserving surgery in a 49-year-old female patient with invasive ductal carcinoma. Block was uneventful and showed no complications. Thus, Pecs block with sedation could be an alternative to general anesthesia for breast surgeries. PMID:28932733

Improved ultrasonic standard reference blocks

NASA Technical Reports Server (NTRS)

Eitzen, D. G.

1975-01-01

A program to improve the quality, reproducibility and reliability of nondestructive testing through the development of improved ASTM-type ultrasonic reference standards is described. Reference blocks of aluminum, steel, and titanium alloys were considered. Equipment representing the state-of-the-art in laboratory and field ultrasonic equipment was obtained and evaluated. Some RF and spectral data on ten sets of ultrasonic reference blocks were taken as part of a task to quantify the variability in response from nominally identical blocks. Techniques for residual stress, preferred orientation, and microstructural measurements were refined and are applied to a reference block rejected by the manufacturer during fabrication in order to evaluate the effect of metallurgical condition on block response.

Long-term use of nerve block catheters in paediatric patients with cancer related pathologic fractures

PubMed Central

BURGOYNE, L. L.; PEREIRAS, L. A.; BERTANI, L. A.; KADDOUM, R. N.; NEEL, M.; FAUGHNAN, L. G.; ANGHELESCU, D. L.

2013-01-01

SUMMARY We report three cases of children with osteosarcoma and pathologic fractures treated with long-term continuous nerve blocks for preoperative pain control. One patient with a left distal femoral diaphysis fracture had a femoral continuous nerve block catheter for 41 days without complications. Another with a fractured left proximal femoral shaft had three femoral continuous nerve block catheters for 33, 26 and 22 days respectively. The third patient, whose right proximal humerus was fractured, had a brachial plexus continuous nerve block catheter for 36 days without complication. In our experience, prolonged use of continuous nerve block is safe and effective in children with pathologic fractures for preoperative pain control. PMID:22813501

BEHAVIORAL COACHING TO IMPROVE OFFENSIVE LINE PASS-BLOCKING SKILLS OF HIGH SCHOOL FOOTBALL ATHLETES

PubMed Central

Stokes, John V; Luiselli, James K; Reed, Derek D; Fleming, Richard K

2010-01-01

We evaluated several behavioral coaching procedures for improving offensive line pass-blocking skills with 5 high school varsity football players. Pass blocking was measured during practice drills and games, and our intervention included descriptive feedback with and without video feedback and teaching with acoustical guidance (TAG). Intervention components and pass blocking were evaluated in a multiple baseline design, which showed that video feedback and TAG were the most effective procedures. For all players, improved pass blocking matched a standard derived by observing more experienced linemen and was evident in games. Additional intervention was required to maintain pass-blocking proficiency. Issues pertinent to behavioral coaching and sport psychology research are discussed. PMID:21358905

Truncal blocks for perioperative pain management: a review of the literature and evolving techniques.

PubMed

Go, Ramon; Huang, Yolanda Y; Weyker, Paul D; Webb, Christopher Aj

2016-10-01

As the American healthcare system continues to evolve and reimbursement becomes tied to value-based incentive programs, perioperative pain management will become increasingly important. Regional anesthetic techniques are only one component of a successful multimodal pain regimen. In recent years, the use of peripheral and paraneuraxial blocks to provide chest wall and abdominal analgesia has gained popularity. When used within a multimodal regimen, truncal blocks may provide similar analgesia when compared with other regional anesthetic techniques. While there are other reviews that cover this topic, our review will also highlight the emerging role for serratus plane blocks, pectoral nerve blocks and quadratus lumborum blocks in providing thoracic and abdominal analgesia.

Retrofit Audits and Cost Estimates. A Look at Quality and Consistency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eisenberg, L.; Shapiro, C.; Fleischer, W.

Retrofit NYC Block by Block is an outreach program targeting owners of one- to four-family homes, the most common building type in New York City, with more than 600,000 structures citywide. Administered by the Pratt Center for Community Development and implemented by four nonprofit, community-based organizations, Block by Block connects residents, businesses, and religious and civic organizations in predominantly low-and moderate-income neighborhoods with one or more of a half-dozen public and private financial incentive programs that facilitate energy-efficiency retrofits. This research project sought to evaluate the approach, effectiveness, and the energy use reductions accomplished by the Retrofit NYC: Block bymore » Block program.« less

Retrofit Audits and Cost Estimates: A Look at Quality and Consistency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eisenberg, L.; Shapiro, C.; Fleischer, W.

Retrofit NYC Block by Block is an outreach program targeting owners of one- to four-family homes, the most common building type in New York City, with more than 600,000 structures citywide. Administered by the Pratt Center for Community Development and implemented by four nonprofit, community based organizations, Block by Block connects residents, businesses, and religious and civic organizations in predominantly low- and moderate-income neighborhoods with one or more of a half-dozen public and private financial incentive programs that facilitate energy-efficiency retrofits. This research project sought to evaluate the approach, effectiveness, and the energy use reductions accomplished by the Retrofit NYC:more » Block by Block program.« less

Cooperative storage of shared files in a parallel computing system with dynamic block size

DOEpatents

Bent, John M.; Faibish, Sorin; Grider, Gary

2015-11-10

Improved techniques are provided for parallel writing of data to a shared object in a parallel computing system. A method is provided for storing data generated by a plurality of parallel processes to a shared object in a parallel computing system. The method is performed by at least one of the processes and comprises: dynamically determining a block size for storing the data; exchanging a determined amount of the data with at least one additional process to achieve a block of the data having the dynamically determined block size; and writing the block of the data having the dynamically determined block size to a file system. The determined block size comprises, e.g., a total amount of the data to be stored divided by the number of parallel processes. The file system comprises, for example, a log structured virtual parallel file system, such as a Parallel Log-Structured File System (PLFS).

How the continents deform: The evidence from tectonic geodesy

USGS Publications Warehouse

Thatcher, Wayne R.

2009-01-01

Space geodesy now provides quantitative maps of the surface velocity field within tectonically active regions, supplying constraints on the spatial distribution of deformation, the forces that drive it, and the brittle and ductile properties of continental lithosphere. Deformation is usefully described as relative motions among elastic blocks and is block-like because major faults are weaker than adjacent intact crust. Despite similarities, continental block kinematics differs from global plate tectonics: blocks are much smaller, typically ∼100–1000 km in size; departures from block rigidity are sometimes measurable; and blocks evolve over ∼1–10 Ma timescales, particularly near their often geometrically irregular boundaries. Quantitatively relating deformation to the forces that drive it requires simplifying assumptions about the strength distribution in the lithosphere. If brittle/elastic crust is strongest, interactions among blocks control the deformation. If ductile lithosphere is the stronger, its flow properties determine the surface deformation, and a continuum approach is preferable.

Atomic layer deposition of ultrathin blocking layer for low-temperature solid oxide fuel cell on nanoporous substrate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, Wonjong; Cho, Gu Young; Noh, Seungtak

2015-01-15

An ultrathin yttria-stabilized zirconia (YSZ) blocking layer deposited by atomic layer deposition (ALD) was utilized for improving the performance and reliability of low-temperature solid oxide fuel cells (SOFCs) supported by an anodic aluminum oxide substrate. Physical vapor-deposited YSZ and gadolinia-doped ceria (GDC) electrolyte layers were deposited by a sputtering method. The ultrathin ALD YSZ blocking layer was inserted between the YSZ and GDC sputtered layers. To investigate the effects of an inserted ultrathin ALD blocking layer, SOFCs with and without an ultrathin ALD blocking layer were electrochemically characterized. The open circuit voltage (1.14 V) of the ALD blocking-layered SOFC was visiblymore » higher than that (1.05 V) of the other cell. Furthermore, the ALD blocking layer augmented the power density and improved the reproducibility.« less

Effects of strychnine on the potassium conductance of the frog node of Ranvier

PubMed Central

1977-01-01

The nature of the block of potassium conductance by strychnine in frog node of Ranvier was investigated. The block is voltage-dependent and reaches a steady level with a relaxation time of 1 to several ms. Block is increased by depolarization or a reduction in [K+]O as well as by increasing strychnine concentration. A quaternary derivative of strychnine produces a similar block only when applied intracellularly. In general and in detail, strychnine block resembles that produced by intracellular application of the substituted tetraethylammonium compounds extensively studied by C.M. Armstrong (1969. J. Gen Physiol. 54:553-575. 1971. J. Gen. Physiol. 58:413-437). The kinetics, voltage dependence, and dependence on [K+]O of strychnine block are of the same form. It is concluded that tertiary strychnine must cross the axon membrane and block from the axoplasmic side in the same fashion as these quaternary amines. PMID:302320

BCYCLIC: A parallel block tridiagonal matrix cyclic solver

NASA Astrophysics Data System (ADS)

Hirshman, S. P.; Perumalla, K. S.; Lynch, V. E.; Sanchez, R.

2010-09-01

A block tridiagonal matrix is factored with minimal fill-in using a cyclic reduction algorithm that is easily parallelized. Storage of the factored blocks allows the application of the inverse to multiple right-hand sides which may not be known at factorization time. Scalability with the number of block rows is achieved with cyclic reduction, while scalability with the block size is achieved using multithreaded routines (OpenMP, GotoBLAS) for block matrix manipulation. This dual scalability is a noteworthy feature of this new solver, as well as its ability to efficiently handle arbitrary (non-powers-of-2) block row and processor numbers. Comparison with a state-of-the art parallel sparse solver is presented. It is expected that this new solver will allow many physical applications to optimally use the parallel resources on current supercomputers. Example usage of the solver in magneto-hydrodynamic (MHD), three-dimensional equilibrium solvers for high-temperature fusion plasmas is cited.

Characterizing the inverses of block tridiagonal, block Toeplitz matrices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boffi, Nicholas M.; Hill, Judith C.; Reuter, Matthew G.

2014-12-04

We consider the inversion of block tridiagonal, block Toeplitz matrices and comment on the behaviour of these inverses as one moves away from the diagonal. Using matrix M bius transformations, we first present an O(1) representation (with respect to the number of block rows and block columns) for the inverse matrix and subsequently use this representation to characterize the inverse matrix. There are four symmetry-distinct cases where the blocks of the inverse matrix (i) decay to zero on both sides of the diagonal, (ii) oscillate on both sides, (iii) decay on one side and oscillate on the other and (iv)more » decay on one side and grow on the other. This characterization exposes the necessary conditions for the inverse matrix to be numerically banded and may also aid in the design of preconditioners and fast algorithms. Finally, we present numerical examples of these matrix types.« less

A Shifted Block Lanczos Algorithm 1: The Block Recurrence

NASA Technical Reports Server (NTRS)

Grimes, Roger G.; Lewis, John G.; Simon, Horst D.

1990-01-01

In this paper we describe a block Lanczos algorithm that is used as the key building block of a software package for the extraction of eigenvalues and eigenvectors of large sparse symmetric generalized eigenproblems. The software package comprises: a version of the block Lanczos algorithm specialized for spectrally transformed eigenproblems; an adaptive strategy for choosing shifts, and efficient codes for factoring large sparse symmetric indefinite matrices. This paper describes the algorithmic details of our block Lanczos recurrence. This uses a novel combination of block generalizations of several features that have only been investigated independently in the past. In particular new forms of partial reorthogonalization, selective reorthogonalization and local reorthogonalization are used, as is a new algorithm for obtaining the M-orthogonal factorization of a matrix. The heuristic shifting strategy, the integration with sparse linear equation solvers and numerical experience with the code are described in a companion paper.

Fuel control for gas turbine engines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stearns, C.F.; Tutherly, H.W.

1983-12-27

The basic gas turbine engine hydromechanical fuel control is adaptable to different engine configurations such as turbofan, turboprop and turboshaft engines by incorporating in the main housing those elements having a commonality to all engine configurations and providing a removable block for each configuration having the necessary control elements and flow passages required for that particular configuration. That is to say, a block with the elements peculiar to a turbofan engine could be replaced by a mating block that includes those elements peculiar to a turboshaft engine in adapting the control for a turboshaft configuration. Similarly another block with thosemore » elements peculiar to a turboprop engine could replace any of the other blocks in adapting the control to a turboprop configuration. Obviously the basic control has the necessary flow passages terminating at the interface with the block and these flow passages mate with corresponding passages in the block.« less

A Novel Method for Block Size Forensics Based on Morphological Operations

NASA Astrophysics Data System (ADS)

Luo, Weiqi; Huang, Jiwu; Qiu, Guoping

Passive forensics analysis aims to find out how multimedia data is acquired and processed without relying on pre-embedded or pre-registered information. Since most existing compression schemes for digital images are based on block processing, one of the fundamental steps for subsequent forensics analysis is to detect the presence of block artifacts and estimate the block size for a given image. In this paper, we propose a novel method for blind block size estimation. A 2×2 cross-differential filter is first applied to detect all possible block artifact boundaries, morphological operations are then used to remove the boundary effects caused by the edges of the actual image contents, and finally maximum-likelihood estimation (MLE) is employed to estimate the block size. The experimental results evaluated on over 1300 nature images show the effectiveness of our proposed method. Compared with existing gradient-based detection method, our method achieves over 39% accuracy improvement on average.

Accretionary history of the Archean Barberton Greenstone Belt (3.55-3.22 Ga), southern Africa

NASA Technical Reports Server (NTRS)

Lowe, D. R.

1994-01-01

The 3.55-3.22 Ga Barberton Greenstone Belt, South Africa and Swaziland, and surrounding coeval plutons can be divided into four tectono-stratigraphic blocks that become younger toward the northwest. Each block formed through early mafic to ultramafic volcanism (Onverwacht Group), probably in oceanic extensional, island, or plateau settings. Volcanism was followed by magmatic quiescence and deposition of fine-grained sediments, possibly in an intraplate setting. Late evolution involved underplating of the mafic crust by tonalitic intrusions along a subduction-related magmatic arc, yielding a thickened, buoyant protocontinental block. The growth of larger continental domains occurred both through magmatic accretion, as new protocontinental blocks developed along the margins of older blocks, and when previously separate blocks were amalgamated through tectonic accretion. Evolution of the Barberton Belt may reflect an Early Archean plate tectonic cycle that characterized a world with few or no large, stabilized blocks of sialic crust.

The intermixed-blocked effect in human perceptual learning is not the consequence of trial spacing.

PubMed

Mitchell, Chris; Nash, Scott; Hall, Geoffrey

2008-01-01

A robust finding in humans and animals is that intermixed exposure to 2 similar stimuli (AX/BX) results in better discriminability of those stimuli on test than does exposure to 2 equally similar stimuli in 2 separate blocks (CX_DX)--the intermixed-blocked effect. This intermixed-blocked effect may be an example of the superiority of spaced over massed practice; in the intermixed, but not the blocked exposure regime, each presentation of a given stimulus (e.g., AX) is separated from the next by the presentation of its partner (BX). Two experiments with human participants replicated the intermixed-blocked effect and showed that the effect was not due to the spacing of exposure trials. A mechanism for the intermixed-blocked effect is proposed, which combines theories from associative learning and memory. PsycINFO Database Record (c) 2008 APA, all rights reserved.

Strength of masonry blocks made with recycled concrete aggregates

NASA Astrophysics Data System (ADS)

Matar, Pierre; Dalati, Rouba El

The idea of recycling concrete of demolished buildings aims at preserving the environment. Indeed, the reuse of concrete as aggregate in new concrete mixes helped to reduce the expenses related to construction and demolition (C&D) waste management and, especially, to protect the environment by reducing the development rate of new quarries. This paper presents the results of an experimental study conducted on masonry blocks containing aggregates resulting from concrete recycling. The purpose of this study is to investigate the effect of recycled aggregates on compressive strength of concrete blocks. Tests were performed on series of concrete blocks: five series each made of different proportions of recycled aggregates, and one series of reference blocks exclusively composed of natural aggregates. Tests showed that using recycled aggregates with addition of cement allows the production of concrete blocks with compressive strengths comparable to those obtained on concrete blocks made exclusively of natural aggregates.

Improved block copolymer domain dispersity on chemical patterns via homopolymer-blending and molecular transfer printing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Guoliang; Nealey, Paul F.

Herein we have investigated the domain width distributions of block copolymers and their ternary blends after directed assembly on chemically patterned surfaces with and without density multiplication. On chemical patterns with density multiplication, the width of the interpolated block copolymer domains was bimodal. Once blended with the corresponding homopolymers, the block copolymers exhibited unimodal distributions of domain width due to the redistribution of homopolymers in the block copolymer domains. When the block copolymers were blended with hydroxyl-terminated homopolymers, the homopolymers with functional end-groups healed the chemical patterns and facilitated the formation of nanostructures with further improved domain width distributions. Lastly,more » it is demonstrated that the block copolymers achieved the most improved domain width distributions when directed to assemble without density multiplication on one-to-one chemical patterns generated by molecular transfer printing.« less

14 CFR 156.7 - Enforcement of State block grant agreements and other related grant assurances.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Enforcement of State block grant agreements... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS STATE BLOCK GRANT PILOT PROGRAM § 156.7 Enforcement of State block grant agreements and other related grant assurances. The Administrator may take any...

49 CFR 236.512 - Cab signal indication when locomotive enters block where restrictive conditions obtain.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Cab signal indication when locomotive enters block... Systems Standards § 236.512 Cab signal indication when locomotive enters block where restrictive... within a block, wherein any condition described in § 236.205 obtains, the cab signals shall indicate...

24 CFR Appendix A to Part 1000 - Indian Housing Block Grant Formula Mechanics

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Indian Housing Block Grant Formula... Housing Block Grant Formula Mechanics This appendix shows the different components of the IHBG formula... Housing Block Grant (IHBG) formula is calculated by initially determining the amount a tribe receives for...

77 FR 11115 - Mobility Fund Phase I Auction Limited Extension of Deadlines for Comments and Reply Comments on...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

... Limited Extension of Deadlines for Comments and Reply Comments on Census Block Eligibility Challenges... reply comments on census block eligibility challenges in AU Docket No. 12-25. The comment and reply... Block Eligibility Challenges (deadline extended): March 16, 2012. Reply Comments due on Census Block...

76 FR 42722 - Notice of Submission of Proposed Information Collection to OMB Indian Housing Block Grants (IHBG...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-19

... Proposed Information Collection to OMB Indian Housing Block Grants (IHBG) Program Reporting AGENCY: Office... proposal. Recipients of Indian Housing Block Grant (IHBG) funds provide plans for low-income housing... lists the following information: Title of Proposal: Indian Housing Block Grants (IHBG) Program Reporting...

Block Play: Practical Suggestions for Common Dilemmas

ERIC Educational Resources Information Center

Tunks, Karyn Wellhousen

2009-01-01

Learning materials and teaching methods used in early childhood classrooms have fluctuated greatly over the past century. However, one learning tool has stood the test of time: Wood building blocks, often called unit blocks, continue to be a source of pleasure and learning for young children at play. Wood blocks have the unique capacity to engage…

46 CFR 42.20-25 - Correction for block coefficient.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Correction for block coefficient. 42.20-25 Section 42.20-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LOAD LINES DOMESTIC AND FOREIGN VOYAGES BY SEA Freeboards § 42.20-25 Correction for block coefficient. If the block coefficient (Cb...

24 CFR Appendix B to Part 1000 - IHBG Block Grant Formula Mechanisms

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false IHBG Block Grant Formula Mechanisms... URBAN DEVELOPMENT NATIVE AMERICAN HOUSING ACTIVITIES Pt. 1000, App. B Appendix B to Part 1000—IHBG Block Grant Formula Mechanisms 1. The Indian Housing Block Grant (IHBG) formula consists of two components...

Designing Technology for Children: Moving from the Computer into the Physical World with Electronic Blocks

ERIC Educational Resources Information Center

Wyeth, Peta; Purchase, Helen

2002-01-01

Electronic Blocks are a new programming environment designed specifically for children between three and eight years of age. As such, the design of the Electronic Block environment is firmly based on principles of developmentally appropriate practices in early childhood education. Electronic Blocks are the physical embodiment of computer…

Block Scheduling: Restructuring the School Day. Hot Topics Series.

ERIC Educational Resources Information Center

Flinders, David J., Ed.

The advantages and disadvantages of block scheduling are considered in 24 articles. The editors provide an overview for each section and a conclusion for the anthology. The first section includes articles which examine issues, concepts, and cases: (1) "All around the Block" (Michael D. Rettig and Robert Lynn Canady); (2) "Block Scheduling: A Means…

Blocks as a Tool for Learning: Historical and Contemporary Perspectives.

ERIC Educational Resources Information Center

Hewitt, Karen

2001-01-01

Examines the central historical and contemporary role of blocks and construction toys in early childhood education. Describes how commercially produced blocks were conceptualized as a surface for displaying symbols, as pure form, or as a way to transmit a cultural heritage of architectural styles. Discusses how blocks were used in early…

31 CFR 537.209 - Expenses of maintaining blocked property; liquidation of blocked account.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Expenses of maintaining blocked property; liquidation of blocked account. 537.209 Section 537.209 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY...

31 CFR 510.403 - Termination and acquisition of an interest in blocked property.

Code of Federal Regulations, 2014 CFR

2014-07-01

... interest in blocked property. 510.403 Section 510.403 Money and Finance: Treasury Regulations Relating to... SANCTIONS REGULATIONS Interpretations § 510.403 Termination and acquisition of an interest in blocked... deemed to be property blocked pursuant to § 510.201, unless there exists in the property another interest...

31 CFR 510.403 - Termination and acquisition of an interest in blocked property.

Code of Federal Regulations, 2011 CFR

2011-07-01

... interest in blocked property. 510.403 Section 510.403 Money and Finance: Treasury Regulations Relating to... SANCTIONS REGULATIONS Interpretations § 510.403 Termination and acquisition of an interest in blocked... deemed to be property blocked pursuant to § 510.201, unless there exists in the property another interest...

31 CFR 510.403 - Termination and acquisition of an interest in blocked property.

Code of Federal Regulations, 2013 CFR

2013-07-01

... interest in blocked property. 510.403 Section 510.403 Money and Finance: Treasury Regulations Relating to... SANCTIONS REGULATIONS Interpretations § 510.403 Termination and acquisition of an interest in blocked... deemed to be property blocked pursuant to § 510.201, unless there exists in the property another interest...

The Crustal and Mantle Velocity Structure in Central Asia from 3D Travel Time Tomography

DTIC Science & Technology

2010-09-01

the Turan plate, and the Tarim block. This geologically and tectonically complicated area is also one of the most seismically active regions in the...Asia features large blocks such as the Indian plate, the Afghan block, the Turan plate, and the Tarim block. This geologically and tectonically

Quantization Distortion in Block Transform-Compressed Data

NASA Technical Reports Server (NTRS)

Boden, A. F.

1995-01-01

The popular JPEG image compression standard is an example of a block transform-based compression scheme; the image is systematically subdivided into block that are individually transformed, quantized, and encoded. The compression is achieved by quantizing the transformed data, reducing the data entropy and thus facilitating efficient encoding. A generic block transform model is introduced.

31 CFR 537.209 - Expenses of maintaining blocked property; liquidation of blocked account.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Expenses of maintaining blocked property; liquidation of blocked account. 537.209 Section 537.209 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY...

Perceptions of Teachers in South Florida Toward Block Scheduling.

ERIC Educational Resources Information Center

Hamdy, Mona; Urich, Ted

1998-01-01

A study was conducted at two metropolitan South Florida high schools to determine perceptions of 100 teachers concerning block scheduling. Teachers felt that the 4 X 4 block schedule contained too many time gaps for teaching foreign languages, English, and math. Teachers believed block schedules benefitted advanced students more than others and…

77 FR 42749 - Proposed Change in State Title V Maternal and Child Health Block Grant Allocations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... Change in State Title V Maternal and Child Health Block Grant Allocations AGENCY: Health Resources and... the State Title V Maternal and Child Health (MCH) Block Grant allocations. Through the Health Resources and Services Administration's Maternal and Child Health Bureau (MCHB), Title V MCH Block Grant...

49 CFR 236.827 - System, block signal.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false System, block signal. 236.827 Section 236.827..., MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.827 System, block signal. A method of governing the movement of trains into or within one or more blocks by...

49 CFR 236.827 - System, block signal.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false System, block signal. 236.827 Section 236.827..., MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.827 System, block signal. A method of governing the movement of trains into or within one or more blocks by...

29 CFR 1926.603 - Pile driving equipment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... strength. (4) Stop blocks shall be provided for the leads to prevent the hammer from being raised against the head block. (5) A blocking device, capable of safely supporting the weight of the hammer, shall be... hammer. (6) Guards shall be provided across the top of the head block to prevent the cable from jumping...

29 CFR 1926.603 - Pile driving equipment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... strength. (4) Stop blocks shall be provided for the leads to prevent the hammer from being raised against the head block. (5) A blocking device, capable of safely supporting the weight of the hammer, shall be... hammer. (6) Guards shall be provided across the top of the head block to prevent the cable from jumping...

29 CFR 1926.603 - Pile driving equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... strength. (4) Stop blocks shall be provided for the leads to prevent the hammer from being raised against the head block. (5) A blocking device, capable of safely supporting the weight of the hammer, shall be... hammer. (6) Guards shall be provided across the top of the head block to prevent the cable from jumping...

29 CFR 1926.603 - Pile driving equipment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... strength. (4) Stop blocks shall be provided for the leads to prevent the hammer from being raised against the head block. (5) A blocking device, capable of safely supporting the weight of the hammer, shall be... hammer. (6) Guards shall be provided across the top of the head block to prevent the cable from jumping...

29 CFR 1926.603 - Pile driving equipment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... strength. (4) Stop blocks shall be provided for the leads to prevent the hammer from being raised against the head block. (5) A blocking device, capable of safely supporting the weight of the hammer, shall be... hammer. (6) Guards shall be provided across the top of the head block to prevent the cable from jumping...

Encoders for block-circulant LDPC codes

NASA Technical Reports Server (NTRS)

Divsalar, Dariush (Inventor); Abbasfar, Aliazam (Inventor); Jones, Christopher R. (Inventor); Dolinar, Samuel J. (Inventor); Thorpe, Jeremy C. (Inventor); Andrews, Kenneth S. (Inventor); Yao, Kung (Inventor)

2009-01-01

Methods and apparatus to encode message input symbols in accordance with an accumulate-repeat-accumulate code with repetition three or four are disclosed. Block circulant matrices are used. A first method and apparatus make use of the block-circulant structure of the parity check matrix. A second method and apparatus use block-circulant generator matrices.

[The fate of the wood of the Fabrica of 1543].

PubMed

Chevallier, Jacques; Neidhardt, Jean-Christophe

2014-01-01

Destiny of the wood blocks which have been used for engraving of illustrations of 1543 edition of the Fabrica is really outstanding. Several times lost and found again, they were transported over Europe in a surprising conservation state, for more than four centuries. Made by the famous Venitian wood-cutters, the blocks cross the Alps to join up Basel in Switzerland and Joannes Oporinus, the printer. Felix Platter uses 48 Vesalian wood-blocks for his own treaty in 1583. These blocks reappear in Augsburg in 1706, at the printer Andreas Maschenbauer's; they are found again by Von Wollter from Ingolstadt: they are used to illustrate Leveling's anatomy book in 1781 and 1783. Ingolstadt university and the blocks will be transferred to Landshut because of Napoleon's war, then to Munich in 1826. But in 1892 147 blocks are found again in the library; and are forgotten again. Forty years after, 230 blocks are discovered again! Icones anatomicae represent the last and fabulous edition made in 1934. The Second World War closes this epic with the library fire on July 13th 1944: none of these precious blocks remains today.

Random Versus Blocked Practice to Enhance Mental Representation in Golf Putting.

PubMed

Fazeli, Davoud; Taheri, HamidReza; Saberi Kakhki, Alireza

2017-06-01

The purpose of this study was to investigate changes in mental representation from either random or blocked practice when engaged in golf putting. Thirty participants were randomly assigned to random practice, blocked practice, and no-practice groups. First, we measured novice golfers' initial mental representation levels and required them to perform 18 putting trials as a pre-test. We then asked random and blocked groups to practice in accordance with their group assignment for six consecutive days (10 blocks each day, 18 trials each). A week after the last practice session, we re-measured all participants' final mental representation levels and required them to perform 18 putting trials to evaluate learning retention through practice. While those engaged in the random practice method putted more poorly during acquisition (i.e., practice) than those in blocked practice, the random practice group experienced more accurate retention during the final putting trials, and they showed a more structured mental representation than those in blocked practice, one that was more similar to that of skilled golfers. These results support the acquisition of a rich mental representation through random versus blocked practice.

Atmospheric blocking in the Climate SPHINX simulations: the role of orography and resolution

NASA Astrophysics Data System (ADS)

Davini, Paolo; Corti, Susanna; D'Andrea, Fabio; Riviere, Gwendal; von Hardenberg, Jost

2017-04-01

The representation of atmospheric blocking in numerical simulations, especially over the Euro-Atlantic region, still represents a main concern for the climate modelling community. We here discuss the Northern Hemisphere winter atmospheric blocking representation in a set of 30-year simulations which has been performed in the framework of the PRACE project "Climate SPHINX". Simulations were run using the EC-Earth Global Climate Model with several ensemble members at 5 different horizontal resolutions (ranging from 125 km to 16 km). Results show that the negative bias in blocking frequency over Europe becomes negligible at resolutions of about 40 km and finer. However, the blocking duration is still underestimated by 1-2 days, suggesting that the correct blocking frequencies are achieved with an overestimation of the number of blocking onsets. The reasons leading to such improvements are then discussed, highlighting the role of orography in shaping the Atlantic jet stream: at higher resolution the jet is weaker and less penetrating over Europe, favoring the breaking of synoptic Rossby waves over the Atlantic stationary ridge and thus increasing the simulated blocking frequency.

On optimizing the blocking step of indirect enzyme-linked immunosorbent assay for Epstein-Barr virus serology.

PubMed

Lim, Chun Shen; Krishnan, Gopala; Sam, Choon Kook; Ng, Ching Ching

2013-01-16

Because blocking agent occupies most binding surface of a solid phase, its ability to prevent nonspecific binding determines the signal-to-noise ratio (SNR) and reliability of an enzyme-linked immunosorbent assay (ELISA). We demonstrate a stepwise approach to seek a compatible blocking buffer for indirect ELISA, via a case-control study (n=176) of Epstein-Barr virus (EBV)-associated nasopharyngeal carcinoma (NPC). Regardless of case-control status, we found that synthetic polymer blocking agents, mainly Ficoll and poly(vinyl alcohol) (PVA) were able to provide homogeneous backgrounds among samples, as opposed to commonly used blocking agents, notably nonfat dry milk (NFDM). The SNRs for NPC samples that correspond to blocking using PVA were approximately 3-fold, on average, higher than those blocking using NFDM. Both intra- and inter-assay precisions of PVA-based assays were <14%. A blocking agent of choice should have tolerable sample backgrounds from both cases and controls to ensure the reliability of an immunoassay. Copyright © 2012 Elsevier B.V. All rights reserved.

A fast direct method for block triangular Toeplitz-like with tri-diagonal block systems from time-fractional partial differential equations

NASA Astrophysics Data System (ADS)

Ke, Rihuan; Ng, Michael K.; Sun, Hai-Wei

2015-12-01

In this paper, we study the block lower triangular Toeplitz-like with tri-diagonal blocks system which arises from the time-fractional partial differential equation. Existing fast numerical solver (e.g., fast approximate inversion method) cannot handle such linear system as the main diagonal blocks are different. The main contribution of this paper is to propose a fast direct method for solving this linear system, and to illustrate that the proposed method is much faster than the classical block forward substitution method for solving this linear system. Our idea is based on the divide-and-conquer strategy and together with the fast Fourier transforms for calculating Toeplitz matrix-vector multiplication. The complexity needs O (MNlog2 ⁡ M) arithmetic operations, where M is the number of blocks (the number of time steps) in the system and N is the size (number of spatial grid points) of each block. Numerical examples from the finite difference discretization of time-fractional partial differential equations are also given to demonstrate the efficiency of the proposed method.

Digital Alchemy for Materials Design: Colloids and Beyond

NASA Astrophysics Data System (ADS)

van Anders, Greg; Klotsa, Daphne; Karas, Andrew; Dodd, Paul; Glotzer, Sharon

Starting with the early alchemists, a holy grail of science has been to make desired materials by manipulating basic building blocks. Building blocks that show promise for assembling new complex materials can be synthesized at the nanoscale with attributes that would astonish the ancient alchemists in their versatility. However, this versatility means that connecting building-block attributes to bulk structure is both necessary for rationally engineering materials and difficult because building block attributes can be altered in many ways. We show how to exploit the malleability of colloidal nanoparticle ``elements'' to quantitatively link building-block attributes to bulk structure through a statistical thermodynamic framework we term ``digital alchemy''. We use this framework to optimize building blocks for a given target structure and to determine which building-block attributes are most important to control for self-assembly, through a set of novel thermodynamic response functions. We thereby establish direct links between the attributes of colloidal building blocks and the bulk structures they form. Moreover, our results give concrete solutions to the more general conceptual challenge of optimizing emergent behaviors in nature and can be applied to other types of matter.

Synthesis and Characterization of a Novel -D-B-A-B- Block Copolymer System for Light Harvesting Applications

NASA Technical Reports Server (NTRS)

Sun, Sam-Shajing; Fan, Zhen; Wang, Yiqing; Taft, Charles; Haliburton, James; Maaref, Shahin

2002-01-01

Supra-molecular or nano-structured electro-active polymers are potentially useful for developing variety inexpensive and flexible shaped opto-electronic devices. In the case of organic photovoltaic materials or devices, for instance, photo induced electrons and holes need to be separated and transported in organic acceptor (A) and donor (D) phases respectively. In this paper, preliminary results of synthesis and characterizations of a coupled block copolymers containing a conjugated donor block RO-PPV and a conjugated acceptor block SF-PPV and some of their electronic/optical properties are presented. While the donor block film has a strong PL emission at around 570 nm, and acceptor block film has a strong PL emission at around 590 nm, the PL emissions of final -B-D-B-A- block copolymer films were quenched over 99%. Experimental results demonstrated an effective photo induced electron transfer and charge separation due to the interfaces of donor and acceptor blocks. The system is very promising for variety light harvesting applications, including "plastic" photovoltaic devices.

A decision-support tool for the control of urban noise pollution.

PubMed

Suriano, Marcia Thais; de Souza, Léa Cristina Lucas; da Silva, Antonio Nelson Rodrigues

2015-07-01

Improving the quality of life is increasingly seen as an important urban planning goal. In order to reach it, various tools are being developed to mitigate the negative impacts of human activities on society. This paper develops a methodology for quantifying the population's exposure to noise, by proposing a classification of urban blocks. Taking into account the vehicular flow and traffic composition of the surroundings of urban blocks, we generated a noise map by applying a computational simulation. The urban blocks were classified according to their noise range and then the population was estimated for each urban block, by a process which was based on the census tract and the constructed area of the blocks. The acoustical classes of urban blocks and the number of inhabitants per block were compared, so that the population exposed to noise levels above 65 dB(A) could be estimated, which is the highest limit established by legislation. As a result, we developed a map of the study area, so that urban blocks that should be priority targets for noise mitigation actions can be quickly identified.

Composition of clusters and building blocks in amylopectins from maize mutants deficient in starch synthase III.

PubMed

Zhu, Fan; Bertoft, Eric; Seetharaman, Koushik

2013-12-18

Branches in amylopectin are distributed along the backbone. Units of the branches are building blocks (smaller) and clusters (larger) based on the distance between branches. In this study, composition of clusters and building blocks of amylopectins from dull1 maize mutants deficient in starch synthase III (SSIII) with a common genetic background (W64A) were characterized and compared with the wild type. Clusters were produced from amylopectins by partial hydrolysis using α-amylase of Bacillus amyloliquefaciens and were subsequently treated with phosphorylase a and β-amylase to produce φ,β-limit dextrins. Clusters were further extensively hydrolyzed with the α-amylase to produce building blocks. Structures of clusters and building blocks were analyzed by diverse chromatographic techniques. The results showed that the dull1 mutation resulted in larger clusters with more singly branched building blocks. The average cluster contained ~5.4 blocks in dull1 mutants and ~4.2 blocks in the wild type. The results are compared with previous results from SSIII-deficient amo1 barley and suggest fundamental differences in the cluster structures.

Abnormal Q waves in right sided chest leads provoked by onset of right bundle-branch block in patients with anteroseptal infarction.

PubMed Central

Rosenbaum, M B; Girotti, L A; Lázzari, J O; Halpern, M S; Elizari, M V

1982-01-01

In five cases of anteroseptal myocardial infarction complicated by intermittent right bundle-branch block, the onset of right bundle-branch block provoked the appearance of abnormal Q waves in leads V1 and V2, whereas a small initial R wave was present in the same leads during normal conduction. The intermittency of the conduction disturbance indicated that the Q waves were "right bundle-branch block dependent". It was also apparent that right bundle-branch block shifted the electrical location of the infarct towards the right, and made it look much larger. Right bundle-branch block dependent Q waves may arise during the acute stage of an anterior infarct suggesting, fallaciously, that an acute extension has occurred, or during the chronic stage, leading to the erroneous supposition that a new infarct had developed. The abnormal Q waves anteroseptal infarction complicated by fixed right bundle-branch block, though obviously related to the infarct, may be dependent on the right bundle-branch block. PMID:7059400

Two-dimensional phase separated structures of block copolymers on solids

NASA Astrophysics Data System (ADS)

Sen, Mani; Jiang, Naisheng; Endoh, Maya; Koga, Tadanori; Ribbe, Alexander

The fundamental, yet unsolved question in block copolymer (BCP) thin films is the self-organization process of BCPs at the solid-polymer melt interface. We here focus on the self-organization processes of cylinder-forming polystyrene-block-poly (4-vinylpyridine) diblock copolymer and lamellar-forming poly (styrene-block-butadiene-block-styrene) triblock copolymer on Si substrates as model systems. In order to reveal the buried interfacial structures, the following experimental protocols were utilized: the BCP monolayer films were annealed under vacuum at T>Tg of the blocks (to equilibrate the melts); vitrification of the annealed BCP films via rapid quench to room temperature; subsequent intensive solvent leaching (to remove unadsorbed chains) with chloroform, a non-selective good solvent for the blocks. The strongly bound BCP layers were then characterized by using atomic force microscopy, scanning electron microscopy, grazing incidence small angle X-ray scattering, and X-ray reflectivity. The results showed that both blocks lie flat on the substrate, forming the two-dimensional, randomly phase-separated structure irrespective of their microdomain structures and interfacial energetics. Acknowledgement of financial support from NSF Grant (CMMI -1332499).

Effect of some blocking drugs on the pressor response to physostigmine in the rat

PubMed Central

Gokhale, S. D.; Gulati, O. D.; Joshi, N. Y.

1963-01-01

Bretylium and guanethidine blocked the pressor effect of physostigmine and potentiated the responses to adrenaline and noradrenaline on the blood pressure of the rat. Morphine and atropine in small doses blocked the pressor effect of physostigmine without interfering with the actions of adrenaline and noradrenaline. Chlorpromazine in small doses (0.5 to 2.5 mg/kg) blocked the pressor effect of physostigmine and potentiated the responses to noradrenaline whilst those to adrenaline remained unaltered. 3,6-Di(3-diethylaminopropoxy)pyridazine di(methiodide) (Win 4981) blocked the pressor effect of physostigmine and, in its early stages, this block was partially reversed by choline chloride. N-Diethylaminoethyl-N-isopentyl-N'N'-diisopropylurea (P-286), in a dose that reduced the effect of dimethylphenylpiperazinium, had no effect on the pressor response to physostigmine or on the responses to adrenaline and noradrenaline. Hexamethonium, even in large doses (100 mg/kg), only blocked partially the effect of physostigmine while mecamylamine produced a complete block; the responses to adrenaline and noradrenaline were potentiated in both instances. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6 PMID:14081658

Structure and Dynamics of Ionic Block Copolymer Melts: Computational Study

DOE PAGES

Aryal, Dipak; Agrawal, Anupriya; Perahia, Dvora; ...

2017-09-06

Structure and dynamics of melts of copolymers with an ABCBA topology, where C is an ionizable block, have been studied by fully atomistic molecular dynamics (MD) simulations. Introducing an ionizable block for functionality adds a significant element to the coupled set of interactions that determine the structure and dynamics of the macromolecule. The polymer consists of a randomly sulfonated polystyrene C block tethered to a flexible poly(ethylene-r-propylene) bridge B and end-capped with poly(tert-butylstyrene) A. The chemical structure and topology of these polymers constitute a model for incorporation of ionic blocks within a framework that provides tactility and mechanical stability. Heremore » in this paper we resolve the structure and dynamics of a structured polymer on the nanoscale constrained by ionic clusters. We find that the melts form intertwined networks of the A and C blocks independent of the degree of sulfonation of the C block with no long-range order. The cluster cohesiveness and morphology affect both macroscopic translational motion and segmental dynamics of all the blocks.« less

Structure and Dynamics of Ionic Block Copolymer Melts: Computational Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aryal, Dipak; Agrawal, Anupriya; Perahia, Dvora

Structure and dynamics of melts of copolymers with an ABCBA topology, where C is an ionizable block, have been studied by fully atomistic molecular dynamics (MD) simulations. Introducing an ionizable block for functionality adds a significant element to the coupled set of interactions that determine the structure and dynamics of the macromolecule. The polymer consists of a randomly sulfonated polystyrene C block tethered to a flexible poly(ethylene-r-propylene) bridge B and end-capped with poly(tert-butylstyrene) A. The chemical structure and topology of these polymers constitute a model for incorporation of ionic blocks within a framework that provides tactility and mechanical stability. Heremore » in this paper we resolve the structure and dynamics of a structured polymer on the nanoscale constrained by ionic clusters. We find that the melts form intertwined networks of the A and C blocks independent of the degree of sulfonation of the C block with no long-range order. The cluster cohesiveness and morphology affect both macroscopic translational motion and segmental dynamics of all the blocks.« less

Development of Alkali Activated Geopolymer Masonry Blocks

NASA Astrophysics Data System (ADS)

Venugopal, K.; Radhakrishna; Sasalatti, Vinod

2016-09-01

Cement masonry units are not considered as sustainable since their production involves consumption of fuel, cement and natural resources and therefore it is essential to find alternatives. This paper reports on making of geopolymer solid & hollow blocks and masonry prisms using non conventional materials like fly ash, ground granulated blast furnace slag (GGBFS) and manufactured sand and curing at ambient temperature. They were tested for water absorption, initial rate of water absorption, dry density, dimensionality, compressive, flexural and bond-strength which were tested for bond strength with and without lateral confinement, modulus of elasticity, alternative drying & wetting and masonry efficiency. The properties of geopolymer blocks were found superior to traditional masonry blocks and the masonry efficiency was found to increase with decrease in thickness of cement mortar joints. There was marginal difference in strength between rendered and unrendered geopolymer masonry blocks. The percentage weight gain after 7 cycles was less than 6% and the percentage reduction in strength of geopolymer solid blocks and hollow blocks were 26% and 28% respectively. Since the properties of geopolymer blocks are comparatively better than the traditional masonry they can be strongly recommended for structural masonry.

Retractable barrier strip

DOEpatents

Marts, Donna J.; Barker, Stacey G.; Wowczuk, Andrew; Vellenoweth, Thomas E.

2002-01-01

A portable barrier strip having retractable tire-puncture spikes for puncturing a vehicle tire. The tire-puncture spikes have an armed position for puncturing a tire and a retracted position for not puncturing a tire. The strip comprises a plurality of barrier blocks having the tire-puncture spikes removably disposed in a shaft that is rotatably disposed in each barrier block. The plurality of barrier blocks hare hingedly interconnected by complementary hinges integrally formed into the side of each barrier block which allow the strip to be rolled for easy storage and retrieval, but which prevent irregular or back bending of the strip. The shafts of adjacent barrier blocks are pivotally interconnected via a double hinged universal joint to accommodate irregularities in a roadway surface and to transmit torsional motion of the shaft from block to block. A single flexshaft cable is connected to the shaft of an end block to allow a user to selectively cause the shafts of a plurality of adjacently connected barrier blocks to rotate the tire-puncture spikes to the armed position for puncturing a vehicle tire, and to the retracted position for not puncturing the tire. The flexshaft is provided with a resiliently biased retracting mechanism, and a release latch for allowing the spikes to be quickly retracted after the intended vehicle tire is punctured.

Clinical safety and effectiveness of transversus abdominis plane (TAP) block in post-operative analgesia: a systematic review and meta-analysis.

PubMed

Ma, Ning; Duncan, Joanna K; Scarfe, Anje J; Schuhmann, Susanne; Cameron, Alun L

2017-06-01

Transversus abdominis plane (TAP) blocks can provide analgesia postoperatively for a range of surgeries. Abundant clinical trials have assessed TAP block showing positive analgesic effects. This systematic review assesses safety and effectiveness outcomes of TAP block in all clinical settings, comparing with both active (standard care) and inactive (placebo) comparators. PubMed, EMBASE, The Cochrane Library and the University of York CRD databases were searched. RCTs were screened for their eligibility and assessed for risk of bias. Meta-analyses were performed on available data. TAP block showed an equivalent safety profile to all comparators in the incidence of nausea (OR = 1.07) and vomiting (OR = 0.81). TAP block was more effective in reducing morphine consumption [MD = 13.05, 95% CI (8.33, 51.23)] and in delaying time to first analgesic request [MD = 123.49, 95% CI (48.59, 198.39)]. Postoperative pain within 24 h was reduced or at least equivalent in TAP block compared to its comparators. Therefore, TAP block is a safe and effective procedure compared to standard care, placebo and other analgesic techniques. Further research is warranted to investigate whether the TAP block technique can be improved by optimizing dose and technique-related factors.

Greater Occipital Nerve Block for Acute Treatment of Migraine Headache: A Large Retrospective Cohort Study.

PubMed

Allen, Sorcha M; Mookadam, Farouk; Cha, Stephen S; Freeman, John A; Starling, Amaal J; Mookadam, Martina

2018-01-01

Greater occipital nerve (GON) blocks are frequently used to treat migraine headaches, although a paucity of supporting clinical evidence exists. The objective of this study was to assess the efficacy of GON block in acute treatment of migraine headache, with a focus on pain relief. This retrospective cohort study was undertaken between January 2009 and August 2014 and included patients who underwent at least 1 GON block and attended at least 1 follow-up appointment. Change in the 11-point numeric pain rating scale (NPRS) was used to assess the response to GON block. Response was defined as "minimal" (<30% NPRS point reduction), "moderate" (31-50% NPRS point reduction), or "significant" (>50% NPRS point reduction). A total of 562 patients met inclusion criteria; 423 were women (75%). Mean age was 58.6 ± 16.7 years. Of these 562, 459 patients (82%) rated their response to GON block as moderate or significant. No statistically significant relationship existed between previous treatment regimens and response to GON block. GON block was equally effective across the different age and sex groups. Greater occipital block seems to be an effective option for acute management of migraine headache, with promising reductions in pain scores. © Copyright 2018 by the American Board of Family Medicine.

Periodontal tissue reaction to customized nano-hydroxyapatite block scaffold in one-wall intrabony defect: a histologic study in dogs

PubMed Central

Lee, Jung-Seok; Park, Weon-Yeong; Cha, Jae-Kook; Jung, Ui-Won; Kim, Chang-Sung; Lee, Yong-Keun

2012-01-01

Purpose This study evaluated histologically the tissue responses to and the effects of a customized nano-hydroxyapatite (n-HA) block bone graft on periodontal regeneration in a one-wall periodontal-defect model. Methods A customized block bone for filling in the standardized periodontal defect was fabricated from prefabricated n-HA powders and a polymeric sponge. Bilateral 4×4×5 mm (buccolingual width×mesiodistal width×depth), one-wall, critical-size intrabony periodontal defects were surgically created at the mandibular second and fourth premolars of five Beagle dogs. In each dog, one defect was filled with block-type HA and the other served as a sham-surgery control. The animals were sacrificed following an 8-week healing interval for clinical and histological evaluations. Results Although the sites that received an n-HA block showed minimal bone formation, the n-HA block was maintained within the defect with its original hexahedral shape. In addition, only a limited inflammatory reaction was observed at sites that received an n-HA block, which might have been due to the high stability of the customized block bone. Conclusions In the limitation of this study, customized n-HA block could provide a space for periodontal tissue engineering, with minimal inflammation. PMID:22586523

A case series of re-establishment of neuromuscular block with rocuronium after sugammadex reversal.

PubMed

Iwasaki, Hajime; Sasakawa, Tomoki; Takahoko, Kenichi; Takagi, Shunichi; Nakatsuka, Hideki; Suzuki, Takahiro; Iwasaki, Hiroshi

2016-06-01

We report the use of rocuronium to re-establish neuromuscular block after reversal with sugammadex. The aim of this study was to investigate the relationship between the dose of rocuronium needed to re-establish neuromuscular block and the time interval between sugammadex administration and re-administration of rocuronium. Patients who required re-establishment of neuromuscular block within 12 h after the reversal of rocuronium-induced neuromuscular block with sugammadex were included. After inducing general anesthesia and placing the neuromuscular monitor, the protocol to re-establish neuromuscular block was as follows. An initial rocuronium dose of 0.6 mg/kg was followed by additional 0.3 mg/kg doses every 2 min until train-of-four responses were abolished. A total of 11 patients were enrolled in this study. Intervals between sugammadex and second rocuronium were 12-465 min. Total dose of rocuronium needed to re-establish neuromuscular block was 0.6-1.2 mg/kg. 0.6 mg/kg rocuronium re-established neuromuscular block in all patients who received initial sugammadex more than 3 h previously. However, when the interval between sugammadex and second rocuronium was less than 2 h, more than 0.6 mg/kg rocuronium was necessary to re-establish neuromuscular block.

Comparing blends and blocks: Synthesis of partially fluorinated diblock polythiophene copolymers to investigate the thermal stability of optical and morphological properties

PubMed Central

Boufflet, Pierre; Wood, Sebastian; Wade, Jessica; Fei, Zhuping; Kim, Ji-Seon

2016-01-01

Summary The microstructure of the active blend layer has been shown to be a critically important factor in the performance of organic solar devices. Block copolymers provide a potentially interesting avenue for controlling this active layer microstructure in solar cell blends. Here we explore the impact of backbone fluorination in block copolymers of poly(3-octyl-4-fluorothiophene)s and poly(3-octylthiophene) (F-P3OT-b-P3OT). Two block co-polymers with varying block lengths were prepared via sequential monomer addition under Kumada catalyst transfer polymerisation (KCTP) conditions. We compare the behavior of the block copolymer to that of the corresponding homopolymer blends. In both types of system, we find the fluorinated segments tend to dominate the UV–visible absorption and molecular vibrational spectral features, as well as the thermal behavior. In the block copolymer case, non-fluorinated segments appear to slightly frustrate the aggregation of the more fluorinated block. However, in situ temperature dependent Raman spectroscopy shows that the intramolecular order is more thermally stable in the block copolymer than in the corresponding blend, suggesting that such materials may be interesting for enhanced thermal stability of organic photovoltaic active layers based on similar systems. PMID:27829922

Bone remodeling in onlay beta-tricalcium phosphate and coral grafts to rat calvaria: microcomputerized tomography analysis.

PubMed

Anavi, Yakir; Avishai, Gal; Calderon, Shlomo; Allon, Dror M

2011-08-01

This study was conducted to establish the efficiency of microcomputerized tomography (micro-CT) in detection of trabecular bone remodeling of onlay grafts in a rodent calvaria model, and to compare bone remodeling after onlay grafts with beta-tricalcium phosphate (TCP) or coral calcium carbonate. Ten rats received calvarial onlay blocks-5 with TCP and 5 with coral calcium carbonate. The grafts were fixed with a titanium miniplate screw and were covered with a collagen resorbable membrane. Three months after surgery, the calvaria were segmented, and a serial 3-dimensional micro-CT scan of the calvarium and grafted bone block at 16-micrometer resolution was performed. Image analysis software was used to calculate the percentage of newly formed bone from the total block size. Newly formed bone was present adjacent to the calvarium and screw in all specimens. The mean area of newly formed bone of the total block size ranged from 34.67%-38.34% in the TCP blocks, and from 32.41%-34.72% in the coral blocks. In the TCP blocks, bone remodeling was found to be slightly higher than in the coral blocks. Micro-CT appears to be a precise, reproducible, specimen-nondestructive method of analysis of bone formation in onlay block grafts to rat calvaria.

[Case of Leriche's syndrome treated with safe and effective analgesia after laparotomy by transversus abdominis plane block, rectus sheath block, and continuous wound infusion with ropivacaine].

PubMed

Hotta, Arisa; Yagi, Yuuki; Hakata, Saaya; Tsumura, Yae; Shimizu, Motoko; Kukida, Ayako; Nakamoto, Ai; Yoshikawa, Noriko; Oohira, Naoko; Tatekawa, Shigeki

2013-12-01

Ultrasound-guided peripheral nerve blocks in the abdominal wall, such as transversus abdominis plane block (TAP block) and rectus sheath block, are now widely used. We report a case of Leriche's syndrome treated with safe and effective analgesia after laparotomy by abdominal wall block and continuous infusion. A 61-year-old man diagnosed with Leriche's syndrome underwent Y-graft replacement for an abdominal aortic aneurysm. Preoperative enhanced and 3-dimensional CTs showed many collateral arterial systems, especially in the right abdominal wall. It was suggested that the right internal iliac artery had been completely occluded, and the left one showed severe stenosis. After the induction of general anesthesia, we recognized collateral arteries through an ultrasound view as on preoperative CTs. We lowered the pulse repetition frequency more than usual in order not to injure them. We injected 0.1875% ropivacaine 60 ml as TAP block, and 20 ml as rectus sheath block. When the wound was closed, a catheter was passed through an 18-gauge Tuohy needle placed above the fascia along the supraumbilical site. After the operation, 0.2% ropivacaine was continuously delivered at a rate of 6 ml hr-1 through the catheter. We could provide the patient with effective analgesia after surgery.

Periodontal tissue reaction to customized nano-hydroxyapatite block scaffold in one-wall intrabony defect: a histologic study in dogs.

PubMed

Lee, Jung-Seok; Park, Weon-Yeong; Cha, Jae-Kook; Jung, Ui-Won; Kim, Chang-Sung; Lee, Yong-Keun; Choi, Seong-Ho

2012-04-01

This study evaluated histologically the tissue responses to and the effects of a customized nano-hydroxyapatite (n-HA) block bone graft on periodontal regeneration in a one-wall periodontal-defect model. A customized block bone for filling in the standardized periodontal defect was fabricated from prefabricated n-HA powders and a polymeric sponge. Bilateral 4×4×5 mm (buccolingual width×mesiodistal width×depth), one-wall, critical-size intrabony periodontal defects were surgically created at the mandibular second and fourth premolars of five Beagle dogs. In each dog, one defect was filled with block-type HA and the other served as a sham-surgery control. The animals were sacrificed following an 8-week healing interval for clinical and histological evaluations. Although the sites that received an n-HA block showed minimal bone formation, the n-HA block was maintained within the defect with its original hexahedral shape. In addition, only a limited inflammatory reaction was observed at sites that received an n-HA block, which might have been due to the high stability of the customized block bone. In the limitation of this study, customized n-HA block could provide a space for periodontal tissue engineering, with minimal inflammation.

Bayesian block-diagonal variable selection and model averaging

PubMed Central

Papaspiliopoulos, O.; Rossell, D.

2018-01-01

Summary We propose a scalable algorithmic framework for exact Bayesian variable selection and model averaging in linear models under the assumption that the Gram matrix is block-diagonal, and as a heuristic for exploring the model space for general designs. In block-diagonal designs our approach returns the most probable model of any given size without resorting to numerical integration. The algorithm also provides a novel and efficient solution to the frequentist best subset selection problem for block-diagonal designs. Posterior probabilities for any number of models are obtained by evaluating a single one-dimensional integral, and other quantities of interest such as variable inclusion probabilities and model-averaged regression estimates are obtained by an adaptive, deterministic one-dimensional numerical integration. The overall computational cost scales linearly with the number of blocks, which can be processed in parallel, and exponentially with the block size, rendering it most adequate in situations where predictors are organized in many moderately-sized blocks. For general designs, we approximate the Gram matrix by a block-diagonal matrix using spectral clustering and propose an iterative algorithm that capitalizes on the block-diagonal algorithms to explore efficiently the model space. All methods proposed in this paper are implemented in the R library mombf. PMID:29861501

New self-assembly strategies for next generation lithography

NASA Astrophysics Data System (ADS)

Schwartz, Evan L.; Bosworth, Joan K.; Paik, Marvin Y.; Ober, Christopher K.

2010-04-01

Future demands of the semiconductor industry call for robust patterning strategies for critical dimensions below twenty nanometers. The self assembly of block copolymers stands out as a promising, potentially lower cost alternative to other technologies such as e-beam or nanoimprint lithography. One approach is to use block copolymers that can be lithographically patterned by incorporating a negative-tone photoresist as the majority (matrix) phase of the block copolymer, paired with photoacid generator and a crosslinker moiety. In this system, poly(α-methylstyrene-block-hydroxystyrene)(PαMS-b-PHOST), the block copolymer is spin-coated as a thin film, processed to a desired microdomain orientation with long-range order, and then photopatterned. Therefore, selfassembly of the block copolymer only occurs in select areas due to the crosslinking of the matrix phase, and the minority phase polymer can be removed to produce a nanoporous template. Using bulk TEM analysis, we demonstrate how the critical dimension of this block copolymer is shown to scale with polymer molecular weight using a simple power law relation. Enthalpic interactions such as hydrogen bonding are used to blend inorganic additives in order to enhance the etch resistance of the PHOST block. We demonstrate how lithographically patternable block copolymers might fit in to future processing strategies to produce etch-resistant self-assembled features at length scales impossible with conventional lithography.

Novel Self-Assembling Amino Acid-Derived Block Copolymer with Changeable Polymer Backbone Structure.

PubMed

Koga, Tomoyuki; Aso, Eri; Higashi, Nobuyuki

2016-11-29

Block copolymers have attracted much attention as potentially interesting building blocks for the development of novel nanostructured materials in recent years. Herein, we report a new type of self-assembling block copolymer with changeable polymer backbone structure, poly(Fmoc-Ser) ester -b-PSt, which was synthesized by combining the polycondensation of 9-fluorenylmethoxycarbonyl-serine (Fmoc-Ser) with the reversible addition-fragmentation chain transfer (RAFT) polymerization of styrene (St). This block copolymer showed the direct conversion of the backbone structure from polyester to polypeptide through a multi O,N-acyl migration triggered by base-induced deprotection of Fmoc groups in organic solvent. Such polymer-to-polymer conversion was found to occur quantitatively without decrease in degree of polymerization and to cause a drastic change in self-assembling property of the block copolymer. On the basis of several morphological analyses using FTIR spectroscopy, atomic force, and transmission and scanning electron microscopies, the resulting peptide block copolymer was found to self-assemble into a vesicle-like hollow nanosphere with relatively uniform diameter of ca. 300 nm in toluene. In this case, the peptide block generated from polyester formed β-sheet structure, indicating the self-assembly via peptide-guided route. We believe the findings presented in this study offer a new concept for the development of self-assembling block copolymer system.

Quadratus Lumborum Block Versus Transversus Abdominis Plane Block for Postoperative Pain After Cesarean Delivery: A Randomized Controlled Trial.

PubMed

Blanco, Rafael; Ansari, Tarek; Riad, Waleed; Shetty, Nanda

Effective postoperative analgesia after cesarean delivery enhances early recovery, ambulation, and breastfeeding. In a previous study, we established the effectiveness of the quadratus lumborum block in providing pain relief after cesarean delivery compared with patient-controlled analgesia (morphine). In the current study, we hypothesized that this method would be equal to or better than the transversus abdominis plane block with regard to pain relief and its duration of action after cesarean delivery. Between April 2015 and August 2015, we randomized 76 patients scheduled for elective cesarean delivery under spinal anesthesia to receive the quadratus lumborum block or the transversus abdominis plane block for postoperative pain relief. This trial was registered prospectively (NCT 02489851) [corrected]. Patients in the quadratus lumborum block group used significantly less morphine than the transversus abdominis plane block group (P < 0.05) at 12, 24, and 48 hours but not at 4 and 6 hours after cesarean delivery. This group also had significantly fewer morphine demands than the control group (P < 0.05) at 6, 12, 24, and 48 hours after cesarean delivery. No significant differences in visual analog scale results were shown between the 2 groups at rest or with movement. Calculated total pain relief at rest and with movement were similar (P < 0.001) in both groups. The quadratus lumborum block was more effective in reducing morphine consumption and demands than transversus abdominis plane blocks after cesarean section. This effect was observed up to 48 hours postoperatively.

Composition of Ragusano cheese during aging.

PubMed

Licitra, G; Campo, P; Manenti, M; Portelli, G; Scuderi, S; Carpino, S; Barbano, D M

2000-03-01

Ragusano cheese is a brine-salted pasta filata cheese. Composition changes during 12 mo of aging were determined. Historically, Ragusano cheese has been aged in caves at 14 to 16 degrees C with about 80 to 90% relative humidity. Cheeses (n = 132) included in our study of block-to-block variation were produced by 20 farmhouse cheese makers in the Hyblean plain region of the Province of Ragusa in Sicily. Mean initial cheese block weight was about 14 kg. The freshly formed blocks of cheese before brine salting contained about 45.35% moisture, 25.3% protein, and 25.4% fat, with a pH of 5.25. As result of the brining and aging process, a natural rind forms. After 12 mo of aging, the cheese contained about 33.6% moisture, 29.2% protein, 30.0% fat, and 4.4% salt with a pH of 5.54, but block-to-block variation was large. Both soluble nitrogen content and free fatty acid (FFA) content increased with age. The pH 4.6 acetate buffer and 12% TCA-soluble nitrogen as a percentage of total nitrogen were 16 and 10.7%, respectively, whereas the FFA content was about 643 mg/100 g of cheese at 180 d. Five blocks of cheese were selected at 180 d for a study of variation within block. Composition variation within block was large; the center had higher moisture and lower salt in moisture content than did the outside. Composition variation within blocks favored more proteolysis and softer texture in the center.

Identifying block structure in the Pacific Northwest, USA

USGS Publications Warehouse

Savage, James C.; Wells, Ray E.

2015-01-01

We have identified block structure in the Pacific Northwest (west of 116°W between 38°N and 49°N) by clustering GPS stations so that the same Euler vector approximates the velocity of each station in a cluster. Given the total number k of clusters desired, the clustering procedure finds the best assignment of stations to clusters. Clustering is calculated for k= 2 to 14. In geographic space, cluster boundaries that remain relatively stable as k is increased are tentatively identified as block boundaries. That identification is reinforced if the cluster boundary coincides with a geologic feature. Boundaries identified in northern California and Nevada are the Central Nevada Seismic Belt, the west side of the Northern Walker Lane Belt, and the Bartlett Springs Fault. Three blocks cover all of Oregon and Washington. The principal block boundary there extends west-northwest along the Brothers Fault Zone, then north and northwest along the eastern boundary of Siletzia, the accreted oceanic basement of the forearc. East of this boundary is the Intermountain block, its eastern boundary undefined. A cluster boundary at Cape Blanco subdivides the forearc along the faulted southern margin of Siletzia. South of Cape Blanco the Klamath Mountains-Basin and Range block extends east to the Central Nevada Seismic Belt and south to the Sierra Nevada-Great Valley block. The Siletzia block north of Cape Blanco coincides almost exactly with the accreted Siletz terrane. The cluster boundary in the eastern Olympic Peninsula may mark permanent shortening of Siletzia against the Intermountain block.

Laparoscopic-guided abdominal wall nerve blocks in the pediatric population: a novel technique with comparison to ultrasound-guided blocks and local wound infiltration alone.

PubMed

Landmann, Alessandra; Visoiu, Mihaela; Malek, Marcus M

2018-03-01

Abdominal wall nerve blocks have been gaining popularity for the treatment of perioperative pain in children. Our aim was to compare a technique of surgeon-performed, laparoscopic abdominal wall nerve blocks to anesthesia-placed, ultrasound-guided abdominal wall nerve blocks and the current standard of local wound infiltration. After institutional review board approval was obtained, a retrospective chart review was performed of pediatric patients treated at a single institution during a 2-year period. Statistics were calculated using analysis of variance with post-hoc Bonferonni t tests for pair-wise comparisons. Included in this study were 380 patients who received ultrasound-guided abdominal wall nerve blocks (n = 125), laparoscopic-guided abdominal wall nerve blocks (n = 88), and local wound infiltration (n = 117). Groups were well matched for age, sex, and weight. There was no significant difference in pain scores within the first 8 hours or narcotic usage between groups. Local wound infiltration demonstrated the shortest overall time required to perform (P < .0001). Patients who received a surgeon-performed abdominal wall nerve block demonstrated a shorter duration of hospital stay when compared to the other groups (P = .02). Our study has demonstrated that laparoscopic-guided abdominal wall nerve blocks show similar efficacy to ultrasound-guided nerve blocks performed by pain management physicians without increasing time in the operating room. Copyright © 2017 Elsevier Inc. All rights reserved.

Is there a prognostic relevance of electrophysiological studies in bundle branch block patients?

PubMed

Bogossian, Harilaos; Frommeyer, Gerrit; Göbbert, Kornelius; Hasan, Fuad; Nguyen, Quy Suu; Ninios, Ilias; Mijic, Dejan; Bandorski, Dirk; Hoeltgen, Reinhard; Seyfarth, Melchior; Lemke, Bernd; Eckardt, Lars; Zarse, Markus

2017-08-01

The present European guidelines suggest a diagnostic electrophysiological (EP) study to determine indication for cardiac pacing in patients with bundle branch block and unexplained syncope. We evaluated the prognostic relevance of an EP study for mortality and the development of permanent complete atrioventricular (AV) block in patients with symptomatic bifascicular block and first-degree AV block. The HV interval is a poor prognostic marker to predict the development of permanent AV block in patients with symptomatic bifascicular block (BFB) and AV block I°. Thirty consecutive patients (mean age, 74.8 ± 8.6 years; 25 males) with symptomatic BFB and first-degree AV block underwent an EP study before device implantation, according to current guidelines. For 53 ± 31 months, patients underwent yearly follow-up screening for syncope or higher-degree AV block. Thirty patients presented with prolonged HV interval during the EP study (mean, 82.2 ± 20.1 ms; range, 57-142 ms), classified into 3 groups: group 1, <70 ms (mean, 62 ± 4 ms; range, 57-67 ms; n = 7), group 2, >70 to ≤100 ms (mean, 80 ± 8 ms; range, 70-97 ms; n = 18), and group 3, >100 ms (mean, 119 ± 14 ms; range, 107-142 ms; n = 5). According to the guidelines, patients in groups 2 and 3 received a pacemaker. The length of the HV interval was not associated with the later development of third-degree AV block or with increased mortality. Our present study suggests that an indication for pacemaker implantation based solely on a diagnostic EP study with prolongation of the HV interval is not justified. © 2017 Wiley Periodicals, Inc.

The Effect of Ketamine and Dexamethasone in Combination with Lidocaine on the Onset and Duration of Axillary Block in Hand and Forearm Soft Tissue Surgery.

PubMed

Zaman, Behrooz; Hojjati Ashrafi, Siavash; Seyed Siamdoust, Seyedalireza; Hassani, Valiollah; Mohamad Taheri, Siavash; Noorizad, Samad

2017-10-01

Using peripheral nerve block compared to general anesthesia has gained more popularity due to reduced postoperative pain, less need for post-surgery analgesic drugs, reduced incidence of nausea, shortness of PACU time, and increased patient satisfaction. The aim of this study was to compare the effect of ketamine and dexamethasone as additives to lidocaine on duration and onset of axillary block action. In this clinical trial, all patients who referred to Hazrat-e-Fatemeh hospital for forearm and hand soft tissue surgery with informed consent were randomly divided into three groups in order to examine the onset and duration of axillary block: lidocaine + ketamine, lidocaine + dexamethasone in axillary block, and lidocaine alone (control). Then, the onset and duration of sensory and motor blocks were measured and recorded every three minutes and after the surgery. Quantitative and qualitative variables were analyzed using ANOVA or Kruskal-Wallis test and Chi-square or Fisher exact test in SPSS v.22. Duration of sensory and motor block axillary was significantly higher in lidocaine + dexamethasone group than in lidocaine + ketamine group (P < 0.05); it was also significantly higher in lidocaine + ketamine group compared to lidocaine group (P < 0.05). However, there was no significant difference in the onset of sensory and motor block axillary between the three groups (P > 0.05). According to the results of our study, we can conclude that adding dexamethasone or ketamine to lidocaine could improve duration of sensory and motor axillary block in patients undergoing forearm and hand soft tissue surgery. However, dexamethasone had the highest effect on duration of block axillary. We proved that dexamethasone or ketamine added to lidocaine had no effect on the onset of block axillary.

Effects of block copolymer properties on nanocarrier protection from in vivo clearance

PubMed Central

D’Addio, Suzanne M.; Saad, Walid; Ansell, Steven M.; Squiers, John J.; Adamson, Douglas; Herrera-Alonso, Margarita; Wohl, Adam R.; Hoye, Thomas R.; Macosko, Christopher W.; Mayer, Lawrence D.; Vauthier, Christine; Prud’homme, Robert K.

2012-01-01

Drug nanocarrier clearance by the immune system must be minimized to achieve targeted delivery to pathological tissues. There is considerable interest in finding in vitro tests that can predict in vivo clearance outcomes. In this work, we produce nanocarriers with dense PEG layers resulting from block copolymer-directed assembly during rapid precipitation. Nanocarriers are formed using block copolymers with hydrophobic blocks of polystyrene (PS), poly-ε-caprolactone (PCL), poly-D,L-lactide (PLA), or poly-lactide-co-glycolide (PLGA), and hydrophilic blocks of polyethylene glycol (PEG) with molecular weights from 1.5 kg/mol to 9 kg/mol. Nanocarriers with paclitaxel prodrugs are evaluated in vivo in Foxn1nu mice to determine relative rates of clearance. The amount of nanocarrier in circulation after 4 h varies from 10% to 85% of initial dose, depending on the block copolymer. In vitro complement activation assays are conducted in an effort to correlate the protection of the nanocarrier surface from complement binding and activation and in vivo circulation. Guidelines for optimizing block copolymer structure to maximize circulation of nanocarriers formed by rapid precipitation and directed assembly are proposed, relating to the relative size of the hydrophilic and hydrophobic block, the hydrophobicity of the anchoring block, the absolute size of the PEG block, and polymer crystallinity. The in vitro results distinguish between the poorly circulating PEG5k-PCL9k and the better circulating nanocarriers, but could not rank the better circulating nanocarriers in order of circulation time. Analysis of PEG surface packing on monodisperse 200 nm latex spheres indicates that the sizes of the hydrophobic PCL, PS, and PLA blocks are correlated with the PEG blob size, and possibly the clearance from circulation. Suggestions for next step in vitro measurements are made. PMID:22732478

Pectoral Fascial (PECS) I and II Blocks as Rescue Analgesia in a Patient Undergoing Minimally Invasive Cardiac Surgery.

PubMed

Yalamuri, Suraj; Klinger, Rebecca Y; Bullock, W Michael; Glower, Donald D; Bottiger, Brandi A; Gadsden, Jeffrey C

Patients undergoing minimally invasive cardiac surgery have the potential for significant pain from the thoracotomy site. We report the successful use of pectoral nerve block types I and II (Pecs I and II) as rescue analgesia in a patient undergoing minimally invasive mitral valve repair. In this case, a 78-year-old man, with no history of chronic pain, underwent mitral valve repair via right anterior thoracotomy for severe mitral regurgitation. After extubation, he complained of 10/10 pain at the incision site that was minimally responsive to intravenous opioids. He required supplemental oxygen because of poor pulmonary mechanics, with shallow breathing and splinting due to pain, and subsequent intensive care unit readmission. Ultrasound-guided Pecs I and II blocks were performed on the right side with 30 mL of 0.2% ropivacaine with 1:400,000 epinephrine. The blocks resulted in near-complete chest wall analgesia and improved pulmonary mechanics for approximately 24 hours. After the single-injection blocks regressed, a second set of blocks was performed with 266 mg of liposomal bupivacaine mixed with bupivacaine. This second set of blocks provided extended analgesia for an additional 48 hours. The patient was weaned rapidly from supplemental oxygen after the blocks because of improved analgesia. Pectoral nerve blocks have been described in the setting of breast surgery to provide chest wall analgesia. We report the first successful use of Pecs blocks to provide effective chest wall analgesia for a patient undergoing minimally invasive cardiac surgery with thoracotomy. We believe that these blocks may provide an important nonopioid option for the management of pain during recovery from minimally invasive cardiac surgery.