7 CFR 868.63 - Certificating appeal inspection results.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 7 2011-01-01 2011-01-01 false Certificating appeal inspection results. 868.63... Certificating appeal inspection results. (a) General. An appeal inspection certificate shall be issued according... results of the appeal inspection or Board appeal inspection service shall be shown on the appeal...

7 CFR 868.63 - Certificating appeal inspection results.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 7 2013-01-01 2013-01-01 false Certificating appeal inspection results. 868.63... Certificating appeal inspection results. (a) General. An appeal inspection certificate shall be issued according... results of the appeal inspection or Board appeal inspection service shall be shown on the appeal...

19 CFR 162.3 - Boarding and search of vessels.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Boarding and search of vessels. 162.3 Section 162.3 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) INSPECTION, SEARCH, AND SEIZURE Inspection, Examination, and Search § 162.3...

115. QUALITY CONTROL BOARD FOR MAINTENANCE AND INSPECTION AT SOUTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

115. QUALITY CONTROL BOARD FOR MAINTENANCE AND INSPECTION AT SOUTH SIDE OF MECHANICAL AND ELECTRICAL ROOM (110), LSB (BLDG. 770), FACING WEST ON EXTERIOR WALL OF QUALITY ASSURANCE ROOM (106A) - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

Laser Scanner For Automatic Inspection Of Printed Wiring Boards

NASA Astrophysics Data System (ADS)

Geise, Philip; George, Eugene; Freese, Fritz; Brown, Robert; Ruwe, Victor

1980-11-01

An, Instrument is described which inspects unpopulated, populated (components onserted and leads clinched), and soldered printed wiring boards for correct hole location, component presence, correct lead clinch direction and solder bridges. The instrument consists of a low power heliumneon laser, an x-y moving iron galvanometer scanner and several folding mirros. A unique shadow signature is detected by silicon photodiodes located at the optium geometry to allow rapid and reliable detection of components with correctly clinched leads. A reflective glint screen is utilized to inspect for a solder bridges. The detected signal are processed and evaluated by a minocomputer which also controls the scan inspection rate of at least 25 components or 50 components holes per second. The return of investment on this instrument for high volume production of printed wirind boards is less than one yea and only slightly longer for medium run military application.

76 FR 52996 - Public Company Accounting Oversight Board; Order Approving Proposed Temporary Rule for an Interim...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-24

... with respect to auditors that issue audit reports only for brokers or dealers that do not receive... Corporation; and If the Board exempts any public accounting firm from such an inspection program, the auditor... inspections of relevant audits and auditors and provide a source of information to help guide decisions about...

Using Inspections to Improve the Quality of Product Documentation and Code.

ERIC Educational Resources Information Center

Zuchero, John

1995-01-01

Describes how, by adapting software inspections to assess documentation and code, technical writers can collaborate with development personnel, editors, and customers to dramatically improve both the quality of documentation and the very process of inspecting that documentation. Notes that the five steps involved in the inspection process are:…

78 FR 57648 - Notice of Issuance of Final Determination Concerning Video Teleconferencing Server

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-19

... the Chinese- origin Video Board and the Filter Board, impart the essential character to the video... includes the codec; a network filter electronic circuit board (``Filter Board''); a housing case; a power... (``Linux software''). The Linux software allows the Filter Board to inspect each Ethernet packet of...

14 CFR 1201.300 - Boards and committees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... inspection and for purchase from the Recorder of the Board of NASA Headquarters, Washington, DC. Decisions... 1978 (41 U.S.C. 601-613). The function of the Board is to decide appeals from decisions of contracting... texts of decisions of the Board are published by Commerce Clearing House, Inc., in Board of Contract...

Potential advantages associated with implementing a risk-based inspection program by a nuclear facility

NASA Astrophysics Data System (ADS)

McNeill, Alexander, III; Balkey, Kenneth R.

1995-05-01

The current inservice inspection activities at a U.S. nuclear facility are based upon the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI. The Code selects examination locations based upon a sampling criteria which includes component geometry, stress, and usage among other criteria. This can result in a significant number of required examinations. As a result of regulatory action each nuclear facility has conducted probabilistic risk assessments (PRA) or individual plant examinations (IPE), producing plant specific risk-based information. Several initiatives have been introduced to apply this new plant risk information. Among these initiatives is risk-based inservice inspection. A code case has been introduced for piping inspections based upon this new risk- based technology. This effort brought forward to the ASME Section XI Code committee, has been initiated and championed by the ASME Research Task Force on Risk-Based Inspection Guidelines -- LWR Nuclear Power Plant Application. Preliminary assessments associated with the code case have revealed that potential advantages exist in a risk-based inservice inspection program with regard to a number of exams, risk, personnel exposure, and cost.

77 FR 14006 - Board of Visitors, United States Military Academy (USMA)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-08

... Organizational Meeting of the USMA Board of Visitors (BoV). Members of the Board will be provided updates on... Harassment/Assault Response and Prevention, Supporting US Army Strategies, and the DAIG Cemetery Inspection...

An experiment to assess the cost-benefits of code inspections in large scale software development

NASA Technical Reports Server (NTRS)

Porter, A.; Siy, H.; Toman, C. A.; Votta, L. G.

1994-01-01

This experiment (currently in progress) is designed to measure costs and benefits of different code inspection methods. It is being performed with a real development team writing software for a commercial product. The dependent variables for each code unit's inspection are the elapsed time and the number of defects detected. We manipulate the method of inspection by randomly assigning reviewers, varying the number of reviewers and the number of teams, and, when using more than one team, randomly assigning author repair and non-repair of detected defects between code inspections. After collecting and analyzing the first 17 percent of the data, we have discovered several interesting facts about reviewers, about the defects recorded during reviewer preparation and during the inspection collection meeting, and about the repairs that are eventually made. (1) Only 17 percent of the defects that reviewers record in their preparations are true defects that are later repaired. (2) Defects recorded at the inspection meetings fall into three categories: 18 percent false positives requiring no author repair, 57 percent soft maintenance where the author makes changes only for readability or code standard enforcement, and 25 percent true defects requiring repair. (3) The median elapsed calendar time for code inspections is 10 working days - 8 working days before the collection meeting and 2 after. (4) In the collection meetings, 31 percent of the defects discovered by reviewers during preparation are suppressed. (5) Finally, 33 percent of the true defects recorded are discovered at the collection meetings and not during any reviewer's preparation. The results to date suggest that inspections with two sessions (two different teams) of two reviewers per session (2sX2p) are the most effective. These two-session inspections may be performed with author repair or with no author repair between the two sessions. We are finding that the two-session, two-person with repair (2sX2pR) inspections are the most expensive, taking 15 working days of calendar time from the time the code is ready for review until author repair is complete, whereas two-session, two-person with no repair (2sX2pN) inspections take only 10 working days, but find about 10 percent fewer defects.

12 CFR 701.3 - Member inspection of credit union books, records, and minutes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Member inspection of credit union books... inspection of credit union books, records, and minutes. (a) Member inspection rights. A group of members of a...) Accounting books and records; and (2) Minutes of the proceedings of the credit union's members, board of...

12 CFR 701.3 - Member inspection of credit union books, records, and minutes.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Member inspection of credit union books... inspection of credit union books, records, and minutes. (a) Member inspection rights. A group of members of a...) Accounting books and records; and (2) Minutes of the proceedings of the credit union's members, board of...

12 CFR 701.3 - Member inspection of credit union books, records, and minutes.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 7 2012-01-01 2012-01-01 false Member inspection of credit union books... inspection of credit union books, records, and minutes. (a) Member inspection rights. A group of members of a...) Accounting books and records; and (2) Minutes of the proceedings of the credit union's members, board of...

12 CFR 701.3 - Member inspection of credit union books, records, and minutes.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 7 2014-01-01 2014-01-01 false Member inspection of credit union books... inspection of credit union books, records, and minutes. (a) Member inspection rights. A group of members of a...) Accounting books and records; and (2) Minutes of the proceedings of the credit union's members, board of...

12 CFR 701.3 - Member inspection of credit union books, records, and minutes.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 7 2013-01-01 2013-01-01 false Member inspection of credit union books... inspection of credit union books, records, and minutes. (a) Member inspection rights. A group of members of a...) Accounting books and records; and (2) Minutes of the proceedings of the credit union's members, board of...

14 CFR 135.419 - Approved aircraft inspection program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Approved aircraft inspection program. 135...

14 CFR 135.419 - Approved aircraft inspection program.

Code of Federal Regulations, 2012 CFR

2012-01-01

... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Approved aircraft inspection program. 135...

14 CFR 135.419 - Approved aircraft inspection program.

Code of Federal Regulations, 2013 CFR

2013-01-01

... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Approved aircraft inspection program. 135...

14 CFR 135.419 - Approved aircraft inspection program.

Code of Federal Regulations, 2014 CFR

2014-01-01

... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Approved aircraft inspection program. 135...

14 CFR 135.419 - Approved aircraft inspection program.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Approved aircraft inspection program. 135...

40 CFR 85.2222 - On-board diagnostic test procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 19 2013-07-01 2013-07-01 false On-board diagnostic test procedures... Warranty Short Tests § 85.2222 On-board diagnostic test procedures. The test sequence for the inspection of on-board diagnostic systems on 1996 and newer light-duty vehicles and light-duty trucks shall consist...

40 CFR 85.2222 - On-board diagnostic test procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 19 2012-07-01 2012-07-01 false On-board diagnostic test procedures... Warranty Short Tests § 85.2222 On-board diagnostic test procedures. The test sequence for the inspection of on-board diagnostic systems on 1996 and newer light-duty vehicles and light-duty trucks shall consist...

40 CFR 85.2222 - On-board diagnostic test procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 18 2011-07-01 2011-07-01 false On-board diagnostic test procedures... Warranty Short Tests § 85.2222 On-board diagnostic test procedures. The test sequence for the inspection of on-board diagnostic systems on 1996 and newer light-duty vehicles and light-duty trucks shall consist...

12 CFR 908.31 - Right to supervise the Banks.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 908.31 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOUSING FINANCE BOARD ORGANIZATION AND... supervise the Banks. Nothing contained in this part shall limit in any manner the right of the Finance Board to conduct any examination, inspection, or visitation of any Bank, or the right of the Finance Board...

40 CFR 52.241 - Inspection and maintenance program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS California § 52.241 Inspection and maintenance program. (a) [Reserved] (b) Approval. On June 5, 2009, the California Air Resources Board submitted a revision to the California Motor Vehicle Inspection and Maintenance Program (2009 I/M Revision) to satisfy...

40 CFR 52.241 - Inspection and maintenance program.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS California § 52.241 Inspection and maintenance program. (a) [Reserved] (b) Approval. On June 5, 2009, the California Air Resources Board submitted a revision to the California Motor Vehicle Inspection and Maintenance Program (2009 I/M Revision) to satisfy...

40 CFR 52.241 - Inspection and maintenance program.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS California § 52.241 Inspection and maintenance program. (a) [Reserved] (b) Approval. On June 5, 2009, the California Air Resources Board submitted a revision to the California Motor Vehicle Inspection and Maintenance Program (2009 I/M Revision) to satisfy...

40 CFR 52.241 - Inspection and maintenance program.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS California § 52.241 Inspection and maintenance program. (a) [Reserved] (b) Approval. On June 5, 2009, the California Air Resources Board submitted a revision to the California Motor Vehicle Inspection and Maintenance Program (2009 I/M Revision) to satisfy...

49 CFR 840.5 - Inspection, examination and testing of physical evidence.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Inspection, examination and testing of physical evidence. 840.5 Section 840.5 Transportation Other Regulations Relating to Transportation (Continued... Inspection, examination and testing of physical evidence. (a) Any employee of the Safety Board, upon...

49 CFR 840.5 - Inspection, examination and testing of physical evidence.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Inspection, examination and testing of physical evidence. 840.5 Section 840.5 Transportation Other Regulations Relating to Transportation (Continued... Inspection, examination and testing of physical evidence. (a) Any employee of the Safety Board, upon...

Iterative development of visual control systems in a research vivarium.

PubMed

Bassuk, James A; Washington, Ida M

2014-01-01

The goal of this study was to test the hypothesis that reintroduction of Continuous Performance Improvement (CPI) methodology, a lean approach to management at Seattle Children's (Hospital, Research Institute, Foundation), would facilitate engagement of vivarium employees in the development and sustainment of a daily management system and a work-in-process board. Such engagement was implemented through reintroduction of aspects of the Toyota Production System. Iterations of a Work-In-Process Board were generated using Shewhart's Plan-Do-Check-Act process improvement cycle. Specific attention was given to the importance of detecting and preventing errors through assessment of the following 5 levels of quality: Level 1, customer inspects; Level 2, company inspects; Level 3, work unit inspects; Level 4, self-inspection; Level 5, mistake proofing. A functioning iteration of a Mouse Cage Work-In-Process Board was eventually established using electronic data entry, an improvement that increased the quality level from 1 to 3 while reducing wasteful steps, handoffs and queues. A visual workplace was realized via a daily management system that included a Work-In-Process Board, a problem solving board and two Heijunka boards. One Heijunka board tracked cage changing as a function of a biological kanban, which was validated via ammonia levels. A 17% reduction in cage changing frequency provided vivarium staff with additional time to support Institute researchers in their mutual goal of advancing cures for pediatric diseases. Cage washing metrics demonstrated an improvement in the flow continuum in which a traditional batch and queue push system was replaced with a supermarket-type pull system. Staff engagement during the improvement process was challenging and is discussed. The collective data indicate that the hypothesis was found to be true. The reintroduction of CPI into daily work in the vivarium is consistent with the 4P Model of the Toyota Way and selected Principles that guide implementation of the Toyota Production System.

Iterative Development of Visual Control Systems in a Research Vivarium

PubMed Central

Bassuk, James A.; Washington, Ida M.

2014-01-01

The goal of this study was to test the hypothesis that reintroduction of Continuous Performance Improvement (CPI) methodology, a lean approach to management at Seattle Children’s (Hospital, Research Institute, Foundation), would facilitate engagement of vivarium employees in the development and sustainment of a daily management system and a work-in-process board. Such engagement was implemented through reintroduction of aspects of the Toyota Production System. Iterations of a Work-In-Process Board were generated using Shewhart’s Plan-Do-Check-Act process improvement cycle. Specific attention was given to the importance of detecting and preventing errors through assessment of the following 5 levels of quality: Level 1, customer inspects; Level 2, company inspects; Level 3, work unit inspects; Level 4, self-inspection; Level 5, mistake proofing. A functioning iteration of a Mouse Cage Work-In-Process Board was eventually established using electronic data entry, an improvement that increased the quality level from 1 to 3 while reducing wasteful steps, handoffs and queues. A visual workplace was realized via a daily management system that included a Work-In-Process Board, a problem solving board and two Heijunka boards. One Heijunka board tracked cage changing as a function of a biological kanban, which was validated via ammonia levels. A 17% reduction in cage changing frequency provided vivarium staff with additional time to support Institute researchers in their mutual goal of advancing cures for pediatric diseases. Cage washing metrics demonstrated an improvement in the flow continuum in which a traditional batch and queue push system was replaced with a supermarket-type pull system. Staff engagement during the improvement process was challenging and is discussed. The collective data indicate that the hypothesis was found to be true. The reintroduction of CPI into daily work in the vivarium is consistent with the 4P Model of the Toyota Way and selected Principles that guide implementation of the Toyota Production System. PMID:24736460

20 CFR 501.4 - Case record; inspection; submission of pleadings and motions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Case record; inspection; submission of pleadings and motions. 501.4 Section 501.4 Employees' Benefits EMPLOYEES' COMPENSATION APPEALS BOARD, DEPARTMENT OF LABOR RULES OF PROCEDURE § 501.4 Case record; inspection; submission of pleadings and motions...

77 FR 75120 - Black Hills National Forest Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

... DEPARTMENT OF AGRICULTURE Forest Service Black Hills National Forest Advisory Board AGENCY: Forest Service, USDA. ACTION: Notice of meeting. SUMMARY: The Black Hills National Forest Advisory Board will... copying. The public may inspect comments received at the Supervisor's Office, Black Hills National Forest...

14 CFR 21.125 - Production inspection system: Materials Review Board.

Code of Federal Regulations, 2010 CFR

2010-01-01

... inspection and engineering departments) and materials review procedures; and (2) Maintain complete records of... properly identified if their physical or chemical properties cannot be readily and accurately determined...

36 CFR 1120.11 - Records available for inspection.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Board in every Board proceeding; (e) Current indexes providing identifying information for the public as... connection with the issuance, amendment, or revocation of rules and regulations or determinations having...

49 CFR 229.23 - Periodic inspection: general.

Code of Federal Regulations, 2012 CFR

2012-10-01

... locomotive. (b) For each locomotive equipped with advanced microprocessor-based on-board electronic condition... April 2, or July 3 if it's a locomotive equipped with advanced microprocessor-based on-board electronic...

49 CFR 229.23 - Periodic inspection: general.

Code of Federal Regulations, 2013 CFR

2013-10-01

... locomotive. (b) For each locomotive equipped with advanced microprocessor-based on-board electronic condition... April 2, or July 3 if it's a locomotive equipped with advanced microprocessor-based on-board electronic...

49 CFR 229.23 - Periodic inspection: general.

Code of Federal Regulations, 2014 CFR

2014-10-01

... locomotive. (b) For each locomotive equipped with advanced microprocessor-based on-board electronic condition... April 2, or July 3 if it's a locomotive equipped with advanced microprocessor-based on-board electronic...

14 CFR 125.247 - Inspection programs and maintenance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Inspection programs and maintenance. 125...

14 CFR 125.247 - Inspection programs and maintenance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Inspection programs and maintenance. 125...

14 CFR 125.247 - Inspection programs and maintenance.

Code of Federal Regulations, 2011 CFR

2011-01-01

... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Inspection programs and maintenance. 125...

14 CFR 125.247 - Inspection programs and maintenance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Inspection programs and maintenance. 125...

14 CFR 125.247 - Inspection programs and maintenance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Inspection programs and maintenance. 125...

9 CFR 54.22 - State scrapie certification boards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false State scrapie certification boards. 54.22 Section 54.22 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT... boards are not appointed for the purpose of providing APHIS with consensus advice or policy...

Modular space vehicle boards, control software, reprogramming, and failure recovery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judd, Stephen; Dallmann, Nicholas; McCabe, Kevin

A space vehicle may have a modular board configuration that commonly uses some or all components and a common operating system for at least some of the boards. Each modular board may have its own dedicated processing, and processing loads may be distributed. The space vehicle may be reprogrammable, and may be launched without code that enables all functionality and/or components. Code errors may be detected and the space vehicle may be reset to a working code version to prevent system failure.

32 CFR 148.5 - Identification of the security policy board.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., MILITARY AND CIVILIAN NATIONAL POLICY AND IMPLEMENTATION OF RECIPROCITY OF FACILITIES National Policy on Reciprocity of Use and Inspections of Facilities § 148.5 Identification of the security policy board. Agencies...

32 CFR 148.5 - Idenfification of the security policy board.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., MILITARY AND CIVILIAN NATIONAL POLICY AND IMPLEMENTATION OF RECIPROCITY OF FACILITIES National Policy on Reciprocity of Use and Inspections of Facilities § 148.5 Idenfification of the security policy board. Agencies...

32 CFR 148.5 - Identification of the security policy board.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., MILITARY AND CIVILIAN NATIONAL POLICY AND IMPLEMENTATION OF RECIPROCITY OF FACILITIES National Policy on Reciprocity of Use and Inspections of Facilities § 148.5 Identification of the security policy board. Agencies...

32 CFR 148.5 - Idenfification of the security policy board.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., MILITARY AND CIVILIAN NATIONAL POLICY AND IMPLEMENTATION OF RECIPROCITY OF FACILITIES National Policy on Reciprocity of Use and Inspections of Facilities § 148.5 Idenfification of the security policy board. Agencies...

32 CFR 148.5 - Identification of the security policy board.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., MILITARY AND CIVILIAN NATIONAL POLICY AND IMPLEMENTATION OF RECIPROCITY OF FACILITIES National Policy on Reciprocity of Use and Inspections of Facilities § 148.5 Identification of the security policy board. Agencies...

75 FR 47444 - Amendments to the Informal and Other Procedures, Rules of Organization and Program Management...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

... Practice; Interim Commission Review of Public Company Accounting Oversight Board Inspection Reports and... facilitate interim Commission review of Public Company Accounting Oversight Board [[Page 47445

Manufacturing Methods & Technology Project Execution Report. First Half CY 80

DTIC Science & Technology

1980-08-01

1 80 7371 INTEGRATED BLADE INSPECTION SYSTEM (IBIS) INSPECTION OF TURBINE ENGINE BLADES AND VANES NECESSITATES HIGH ACCURACY. THE EFFORT IS TIME...OPTICAL INSP OF PRINTED CIRCUIT BOARDS OPERATOR FATIGUE ALLOWS MANY BAD PCBSS TO PASS VISUAL INSPECTION . 29 PROJECTS ADDED IN 1ST HALF» CY80...2631 TITLED "CRITICAL ELECTROHAGNETIC INSPECTION PROBLEMS WITHIN THE ARMY." FUTURE STATUS WILL BE INCLUDED IN THE PROJECT STATUS FOR M 80 6350

77 FR 11742 - Approval and Promulgation of Implementation Plans; New York; Motor Vehicle Enhanced Inspection...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-28

... placed on the Internet and will be publicly available only in hard copy form. Publicly available docket... indicates that the decentralized program, which features on-board diagnostics inspections, is as effective...

Speech input system for meat inspection and pathological coding used thereby

NASA Astrophysics Data System (ADS)

Abe, Shozo

Meat inspection is one of exclusive and important jobs of veterinarians though it is not well known in general. As the inspection should be conducted skillfully during a series of continuous operations in a slaughter house, development of automatic inspecting systems has been required for a long time. We employed a hand-free speech input system to record the inspecting data because inspecters have to use their both hands to treat the internals of catles and check their health conditions by necked eyes. The data collected by the inspectors are transfered to a speech recognizer and then stored as controlable data of each catle inspected. Control of terms such as pathological conditions to be input and their coding are also important in this speech input system and practical examples are shown.

Hardware Testing for the Optical PAyload for Lasercomm Science (OPALS)

NASA Technical Reports Server (NTRS)

Slagle, Amanda

2011-01-01

Hardware for several subsystems of the proposed Optical PAyload for Lasercomm Science (OPALS), including the gimbal and avionics, was tested. Microswitches installed on the gimbal were evaluated to verify that their point of actuation would remain within the acceptable range even if the switches themselves move slightly during launch. An inspection of the power board was conducted to ensure that all power and ground signals were isolated, that polarized components were correctly oriented, and that all components were intact and securely soldered. Initial testing on the power board revealed several minor problems, but once they were fixed the power board was shown to function correctly. All tests and inspections were documented for future use in verifying launch requirements.

Improving software quality - The use of formal inspections at the Jet Propulsion Laboratory

NASA Technical Reports Server (NTRS)

Bush, Marilyn

1990-01-01

The introduction of software formal inspections (Fagan Inspections) at JPL for finding and fixing defects early in the software development life cycle are reviewed. It is estimated that, by the year 2000, some software efforts will rise to as much as 80 percent of the total. Software problems are especially important at NASA as critical flight software must be error-free. It is shown that formal inspections are particularly effective at finding and removing defects having to do with clarity, correctness, consistency, and completeness. A very significant discovery was that code audits were not as effective at finding defects as code inspections.

77 FR 12202 - Public Inspection of Material Relating to Tax-Exempt Organizations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-29

...This document contains final regulations pertaining to the public inspection of material relating to tax-exempt organizations and final regulations pertaining to the public inspection of written determinations and background file documents. These regulations are necessary to clarify rules relating to information and materials made available by the IRS for public inspection under the Internal Revenue Code (Code). The final regulations affect certain organizations exempt from Federal income tax, organizations that were exempt but are no longer exempt from Federal income tax, and organizations that were denied tax-exempt status.

76 FR 40961 - Public Company Accounting Oversight Board; Notice of Filing of Proposed Temporary Rule for an...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-12

... would be appropriate with respect to auditors that issue audit reports only for brokers or dealers that... Board to begin inspections of relevant audits and auditors and provide a source of information to help... introducing broker or dealer. These commenters suggested that the Board either should exempt the auditors of...

32 CFR 865.118 - Availability of Discharge Review Board documents for public inspection and copying.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Board Agency, Attention: SFBA (Reading Room), Room 1E520, The Pentagon, Washington DC 20310 ... and copying shall be located in the Armed Forces Discharge Review/Correction Boards Reading Room. The... or the Secretary of the Air Force granted or denied relief. (1) The reading file index shall include...

33 CFR 53.5 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... member of a Department of Defense or Department of Homeland Security audit, inspection, investigation, or... Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PERSONNEL COAST GUARD... Department of Homeland Security Board for Correction of Military Records of the Coast Guard (Board) is...

Associations between membership of farm assurance and organic certification schemes and compliance with animal welfare legislation.

PubMed

KilBride, A L; Mason, S A; Honeyman, P C; Pritchard, D G; Hepple, S; Green, L E

2012-02-11

Animal health (AH) defines the outcome of their inspections of livestock holdings as full compliance with the legislation and welfare code (A), compliance with the legislation but not the code (B), non-compliance with legislation but no pain, distress or suffering obvious in the animals (C) or evidence of unnecessary pain or unnecessary distress (D). The aim of the present study was to investigate whether membership of farm assurance or organic certification schemes was associated with compliance with animal welfare legislation as inspected by AH. Participating schemes provided details of their members, past and present, and these records were matched against inspection data from AH. Multivariable multilevel logistic binomial models were built to investigate the association between compliance with legislation and membership of a farm assurance/organic scheme. The percentage of inspections coded A, B, C or D was 37.1, 35.6, 20.2 and 7.1 per cent, respectively. Once adjusted for year, country, enterprise, herd size and reason for inspection, there was a pattern of significantly reduced risk of codes C and D compared with A and B, in certified enterprises compared with the enterprises that were not known to be certified in all species.

Surface inspection: Research and development

NASA Technical Reports Server (NTRS)

Batchelder, J. S.

1987-01-01

Surface inspection techniques are used for process learning, quality verification, and postmortem analysis in manufacturing for a spectrum of disciplines. First, trends in surface analysis are summarized for integrated circuits, high density interconnection boards, and magnetic disks, emphasizing on-line applications as opposed to off-line or development techniques. Then, a closer look is taken at microcontamination detection from both a patterned defect and a particulate inspection point of view.

Modern Instrumental Methods to Investigate the Mechanism of Biological Decay in Wood Plastic Composites

Treesearch

Grace Sun; Rebecca Ibach; Marek Gnatowski; Jessie Glaeser; Mathew Leung; John Haight

2014-01-01

Various instrumental techniques were used to study the fungal decay process in wood plastic composite (WPC) boards. Commercial boards exposed near Hilo, Hawaii (HI) for eight years in both sun and shadow locations were inspected and tested periodically. After eight years of exposure, both boards were evaluated using magnetic resonance imaging (MRI), while a selected...

National Program for Inspection of Non-Federal Dams. Murphy Dam (NH 00185), Connecticut River Basin, Pittsburg, New Hampshire. Phase I Inspection Report.

DTIC Science & Technology

1981-08-01

dam is coordinated with the needs of the both the New England Electric System and Public Service Company of New Hampshire. 2.4 Evaluation of Data a...England Electric System and the Public Service Company of New Hampshire. The 174 sq. mi. drainage abea tributary to Lake Francis consists of two major...Board 8-24 thru B-291 9 October 1974 New Hampshire Water Resources Board and New England Power Company B-30 ttiru B-41I28 November 1977 Chas. T. Main

46 CFR 107.113 - Industrial personnel.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Industrial personnel. 107.113 Section 107.113 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND... required crew as set forth in the Certificate of Inspection, carried on board a mobile offshore drilling...

46 CFR 107.113 - Industrial personnel.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Industrial personnel. 107.113 Section 107.113 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND... required crew as set forth in the Certificate of Inspection, carried on board a mobile offshore drilling...

46 CFR 107.113 - Industrial personnel.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Industrial personnel. 107.113 Section 107.113 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND... required crew as set forth in the Certificate of Inspection, carried on board a mobile offshore drilling...

46 CFR 107.113 - Industrial personnel.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Industrial personnel. 107.113 Section 107.113 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND... required crew as set forth in the Certificate of Inspection, carried on board a mobile offshore drilling...

46 CFR 107.113 - Industrial personnel.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Industrial personnel. 107.113 Section 107.113 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND... required crew as set forth in the Certificate of Inspection, carried on board a mobile offshore drilling...

49 CFR 1248.6 - Public inspection-railroad reports.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 9 2013-10-01 2013-10-01 false Public inspection-railroad reports. 1248.6 Section 1248.6 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION (CONTINUED) ACCOUNTS, RECORDS AND REPORTS FREIGHT COMMODITY STATISTICS § 1248.6 Public inspection—railroad...

A Comparative Study of Inspection Techniques for Array Packages

NASA Technical Reports Server (NTRS)

Mohammed, Jelila; Green, Christopher

2008-01-01

This viewgraph presentation reviews the inspection techniques for Column Grid Array (CGA) packages. The CGA is a method of chip scale packaging using high temperature solder columns to attach part to board. It is becoming more popular over other techniques (i.e. quad flat pack (QFP) or ball grid array (BGA)). However there are environmental stresses and workmanship challenges that require good inspection techniques for these packages.

7 CFR 800.88 - Loss of identity.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Loss of identity. 800.88 Section 800.88 Agriculture... Methods and Procedures § 800.88 Loss of identity. (a) Lots. Except as noted in paragraph (d) of this... personnel performing a reinspection, appeal inspection, or Board appeal inspection service, the identity of...

7 CFR 800.88 - Loss of identity.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 7 2012-01-01 2012-01-01 false Loss of identity. 800.88 Section 800.88 Agriculture... Methods and Procedures § 800.88 Loss of identity. (a) Lots. Except as noted in paragraph (d) of this... personnel performing a reinspection, appeal inspection, or Board appeal inspection service, the identity of...

7 CFR 800.88 - Loss of identity.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 7 2014-01-01 2014-01-01 false Loss of identity. 800.88 Section 800.88 Agriculture... Methods and Procedures § 800.88 Loss of identity. (a) Lots. Except as noted in paragraph (d) of this... personnel performing a reinspection, appeal inspection, or Board appeal inspection service, the identity of...

7 CFR 800.88 - Loss of identity.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 7 2013-01-01 2013-01-01 false Loss of identity. 800.88 Section 800.88 Agriculture... Methods and Procedures § 800.88 Loss of identity. (a) Lots. Except as noted in paragraph (d) of this... personnel performing a reinspection, appeal inspection, or Board appeal inspection service, the identity of...

7 CFR 800.88 - Loss of identity.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 7 2011-01-01 2011-01-01 false Loss of identity. 800.88 Section 800.88 Agriculture... Methods and Procedures § 800.88 Loss of identity. (a) Lots. Except as noted in paragraph (d) of this... personnel performing a reinspection, appeal inspection, or Board appeal inspection service, the identity of...

49 CFR 180.417 - Reporting and record retention requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... with the National Board, or copy the information contained on the cargo tank's identification and ASME.... (b) Test or inspection reporting. Each person performing a test or inspection as specified in § 180... (type of device, set to discharge pressure, pressure at which device opened, pressure at which device re...

49 CFR 180.417 - Reporting and record retention requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... with the National Board, or copy the information contained on the cargo tank's identification and ASME.... (b) Test or inspection reporting. Each person performing a test or inspection as specified in § 180... (type of device, set to discharge pressure, pressure at which device opened, pressure at which device re...

Code Help: Can This Unique State Regulatory Intervention Improve Emergency Department Crowding?

PubMed

Michael, Sean S; Broach, John P; Kotkowski, Kevin A; Brush, D Eric; Volturo, Gregory A; Reznek, Martin A

2018-05-01

Emergency department (ED) crowding adversely affects multiple facets of high-quality care. The Commonwealth of Massachusetts mandates specific, hospital action plans to reduce ED boarding via a mechanism termed "Code Help." Because implementation appears inconsistent even when hospital conditions should have triggered its activation, we hypothesized that compliance with the Code Help policy would be associated with reduction in ED boarding time and total ED length of stay (LOS) for admitted patients, compared to patients seen when the Code Help policy was not followed. This was a retrospective analysis of data collected from electronic, patient-care, timestamp events and from a prospective Code Help registry for consecutive adult patients admitted from the ED at a single academic center during a 15-month period. For each patient, we determined whether the concurrent hospital status complied with the Code Help policy or violated it at the time of admission decision. We then compared ED boarding time and overall ED LOS for patients cared for during periods of Code Help policy compliance and during periods of Code Help policy violation, both with reference to patients cared for during normal operations. Of 89,587 adult patients who presented to the ED during the study period, 24,017 (26.8%) were admitted to an acute care or critical care bed. Boarding time ranged from zero to 67 hours 30 minutes (median 4 hours 31 minutes). Total ED LOS for admitted patients ranged from 11 minutes to 85 hours 25 minutes (median nine hours). Patients admitted during periods of Code Help policy violation experienced significantly longer boarding times (median 20 minutes longer) and total ED LOS (median 46 minutes longer), compared to patients admitted under normal operations. However, patients admitted during Code Help policy compliance did not experience a significant increase in either metric, compared to normal operations. In this single-center experience, implementation of the Massachusetts Code Help regulation was associated with reduced ED boarding time and ED LOS when the policy was consistently followed, but there were adverse effects on both metrics during violations of the policy.

75 FR 81684 - Order Approving Public Company Accounting Oversight Board Budget and Annual Accounting Support...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-28

... Accounting Oversight Board Budget and Annual Accounting Support Fee for Calendar Year 2011 The Sarbanes-Oxley Act of 2002, as amended (the ``Sarbanes-Oxley Act''), established the Public Company Accounting... through registration of public accounting firms and standard setting, inspection, and disciplinary...

78 FR 11915 - Order Approving Public Company Accounting Oversight Board Budget and Annual Accounting Support...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-20

... Accounting Oversight Board Budget and Annual Accounting Support Fee for Calendar Year 2013 The Sarbanes-Oxley Act of 2002, as amended (the ``Sarbanes-Oxley Act''),\\1\\ established the Public Company Accounting... through registration of public accounting firms and standard setting, inspection, and disciplinary...

77 FR 2576 - Order Approving Public Company Accounting Oversight Board Budget and Annual Accounting Support...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-18

... Accounting Oversight Board Budget and Annual Accounting Support Fee for Calendar Year 2012 The Sarbanes-Oxley Act of 2002, as amended (the ``Sarbanes-Oxley Act''),\\1\\ established the Public Company Accounting... through registration of public accounting firms and standard setting, inspection, and disciplinary...

46 CFR 52.01-135 - Inspection and tests (modifies PG-90 through PG-100).

Code of Federal Regulations, 2010 CFR

2010-10-01

...). (a) Requirements. Inspection and test of boilers and boiler pressure parts shall be as indicated in PG-90 through PG-100 of section I of the ASME Boiler and Pressure Vessel Code (incorporated by...-91 of section I of the ASME Boiler and Pressure Vessel Code (incorporated by reference; see 46 CFR 52...

FDA Procedures for Standardization and Certification of Retail Food Inspection/Training Officers, 2000.

ERIC Educational Resources Information Center

Food and Drug Administration (DHHS/PHS), Rockville, MD.

This document provides information, standards, and behavioral objectives for standardization and certification of retail food inspection personnel in the Food and Drug Administration (FDA). The procedures described in the document are based on the FDA Food Code, updated to reflect current Food Code provisions and to include a more refined focus on…

Inspection authorization knowledge test guide : July 2010.

DOT National Transportation Integrated Search

2010-07-01

FAA-G-8082-11B, Inspection Authorization Knowledge Test Guide, provides information for preparing to take the following knowledge test. This document supersedes FAA-G-8082-11A, dated 2004. : TEST NAME: Inspection Authorization TEST CODE: IAR : The Fe...

14 CFR 240.2 - Obligation of air carriers, foreign air carriers, and ticket agents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... special agent or auditor of the Board, and upon the presentation of the identification card and... forthwith permit such special agent or auditor to inspect and examine all lands, buildings and equipment; (b... auditor to inspect and examine all accounts, records, memorandums, documents, papers and correspondence...

Report: American Recovery and Reinvestment Act Site Inspection of the Clean Water State Revolving Fund Projects at the City of Long Beach, California

EPA Pesticide Factsheets

Report #11-R-0082, February 1, 2011. Our site inspections identified a wage compliance issue that merits attention from and action by the city, the California State Water Resources Control Board, and the U.S. Environmental Protection Agency.

14 CFR 240.2 - Obligation of air carriers, foreign air carriers, and ticket agents.

Code of Federal Regulations, 2011 CFR

2011-01-01

... special agent or auditor of the Board, and upon the presentation of the identification card and... forthwith permit such special agent or auditor to inspect and examine all lands, buildings and equipment; (b... auditor to inspect and examine all accounts, records, memorandums, documents, papers and correspondence...

7 CFR 318.13-10 - Inspection of baggage, other personal effects, and cargo.

Code of Federal Regulations, 2013 CFR

2013-01-01

... the airport security checkpoint or the aircraft boarding gate, at the time they pass through the... in the public areas of the airport. When an inspector has inspected and passed such baggage or..., or aircraft provides space and facilities on the means of conveyance, pier, or airport that are...

7 CFR 318.13-10 - Inspection of baggage, other personal effects, and cargo.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the airport security checkpoint or the aircraft boarding gate, at the time they pass through the... in the public areas of the airport. When an inspector has inspected and passed such baggage or..., or aircraft provides space and facilities on the means of conveyance, pier, or airport that are...

7 CFR 318.13-10 - Inspection of baggage, other personal effects, and cargo.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the airport security checkpoint or the aircraft boarding gate, at the time they pass through the... in the public areas of the airport. When an inspector has inspected and passed such baggage or..., or aircraft provides space and facilities on the means of conveyance, pier, or airport that are...

7 CFR 318.13-10 - Inspection of baggage, other personal effects, and cargo.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the airport security checkpoint or the aircraft boarding gate, at the time they pass through the... in the public areas of the airport. When an inspector has inspected and passed such baggage or..., or aircraft provides space and facilities on the means of conveyance, pier, or airport that are...

Eliminating NVA Requirements & Improving the Inspection System

DTIC Science & Technology

2011-01-27

Wg ISPR Blood Pgm QA JTAC Stan/Eval Formal Joint Comm AAAHC SCI Security Pgm Review Pathologists WII Ed & Dev Inter vent. Servi ces FDA Pubs...his/her tour  Balanced mix of scheduled & no-notice inspections  Units will be inspected for Readiness and Compliance every 24 months  Readiness...a whole  IG Team Chiefs drive team effectiveness, are the most visible direct representatives of MAJCOM CCs & should be selected by CIP or a board

MELFI-3 Cold Box inspection

NASA Image and Video Library

2015-03-13

ISS043e000724 (03/13/2015) --- ESA (European Space Agency) astronaut Samantha Cristoforetti, Expedition 43 flight engineer works daily on science and maintenance duties on board the International Space Station. She is inspecting the Minus Eighty-degree Laboratory Freezer called by the shorter title "MELFI-3 Cold Box inspection". Astronauts are trained for long periods at the Johnson Space Center and in Russia before their missions in space begin so that they are fully trained for these complex duties.

Consistency of the New York State bridge inspection program.

DOT National Transportation Integrated Search

2013-09-01

The New York State Department of Transportation (NYSDOT) maintains an inventory of over 17,000 highway : bridges across the state. As per New York States Uniform Code of Bridge Inspections, all bridges in New York : State are inspected biennially,...

Code inspection instructional validation

NASA Technical Reports Server (NTRS)

Orr, Kay; Stancil, Shirley

1992-01-01

The Shuttle Data Systems Branch (SDSB) of the Flight Data Systems Division (FDSD) at Johnson Space Center contracted with Southwest Research Institute (SwRI) to validate the effectiveness of an interactive video course on the code inspection process. The purpose of this project was to determine if this course could be effective for teaching NASA analysts the process of code inspection. In addition, NASA was interested in the effectiveness of this unique type of instruction (Digital Video Interactive), for providing training on software processes. This study found the Carnegie Mellon course, 'A Cure for the Common Code', effective for teaching the process of code inspection. In addition, analysts prefer learning with this method of instruction, or this method in combination with other methods. As is, the course is definitely better than no course at all; however, findings indicate changes are needed. Following are conclusions of this study. (1) The course is instructionally effective. (2) The simulation has a positive effect on student's confidence in his ability to apply new knowledge. (3) Analysts like the course and prefer this method of training, or this method in combination with current methods of training in code inspection, over the way training is currently being conducted. (4) Analysts responded favorably to information presented through scenarios incorporating full motion video. (5) Some course content needs to be changed. (6) Some content needs to be added to the course. SwRI believes this study indicates interactive video instruction combined with simulation is effective for teaching software processes. Based on the conclusions of this study, SwRI has outlined seven options for NASA to consider. SwRI recommends the option which involves creation of new source code and data files, but uses much of the existing content and design from the current course. Although this option involves a significant software development effort, SwRI believes this option will produce the most effective results.

The Legal Implication of Cultural Bias in the Intelligence Testing of Disadvantaged School Children

ERIC Educational Resources Information Center

Georgetown Law Journal, 1973

1973-01-01

The court cases and legal codes cited in this article include: Brown v. Board of Education, 1954; Hobson v. Hansen, 1967; Diana v. State Board of Education (Calif.), 1970; and, California Education Code, 1972. (SF)

Practical Formal Verification of MPI and Thread Programs

NASA Astrophysics Data System (ADS)

Gopalakrishnan, Ganesh; Kirby, Robert M.

Large-scale simulation codes in science and engineering are written using the Message Passing Interface (MPI). Shared memory threads are widely used directly, or to implement higher level programming abstractions. Traditional debugging methods for MPI or thread programs are incapable of providing useful formal guarantees about coverage. They get bogged down in the sheer number of interleavings (schedules), often missing shallow bugs. In this tutorial we will introduce two practical formal verification tools: ISP (for MPI C programs) and Inspect (for Pthread C programs). Unlike other formal verification tools, ISP and Inspect run directly on user source codes (much like a debugger). They pursue only the relevant set of process interleavings, using our own customized Dynamic Partial Order Reduction algorithms. For a given test harness, DPOR allows these tools to guarantee the absence of deadlocks, instrumented MPI object leaks and communication races (using ISP), and shared memory races (using Inspect). ISP and Inspect have been used to verify large pieces of code: in excess of 10,000 lines of MPI/C for ISP in under 5 seconds, and about 5,000 lines of Pthread/C code in a few hours (and much faster with the use of a cluster or by exploiting special cases such as symmetry) for Inspect. We will also demonstrate the Microsoft Visual Studio and Eclipse Parallel Tools Platform integrations of ISP (these will be available on the LiveCD).

12 CFR 261b.12 - Procedures for inspection and obtaining copies of transcriptions and minutes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Procedures for inspection and obtaining copies of transcriptions and minutes. 261b.12 Section 261b.12 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM RULES REGARDING PUBLIC OBSERVATION OF MEETINGS...

Effect of a Publicly Accessible Disclosure System on Food Safety Inspection Scores in Retail and Food Service Establishments.

PubMed

Choi, Jihee; Scharff, Robert L

2017-07-01

The increased frequency with which people are dining out coupled with an increase in the publicity of foodborne disease outbreaks has led the public to an increased awareness of food safety issues associated with food service establishments. To accommodate consumer needs, local health departments have increasingly publicized food establishments' health inspection scores. The objective of this study was to estimate the effect of the color-coded inspection score disclosure system in place since 2006 in Columbus, OH, by controlling for several confounding factors. This study incorporated cross-sectional time series data from food safety inspections performed from the Columbus Public Health Department. An ordinary least squares regression was used to assess the effect of the new inspection regime. The introduction of the new color-coded food safety inspection disclosure system increased inspection scores for all types of establishments and for most types of inspections, although significant differences were found in the degree of improvement. Overall, scores increased significantly by 1.14 points (of 100 possible). An exception to the positive results was found for inspections in response to foodborne disease complaints. Scores for these inspections declined significantly by 10.2 points. These results should be useful for both food safety researchers and public health decision makers.

Volumetric segmentation of range images for printed circuit board inspection

NASA Astrophysics Data System (ADS)

Van Dop, Erik R.; Regtien, Paul P. L.

1996-10-01

Conventional computer vision approaches towards object recognition and pose estimation employ 2D grey-value or color imaging. As a consequence these images contain information about projections of a 3D scene only. The subsequent image processing will then be difficult, because the object coordinates are represented with just image coordinates. Only complicated low-level vision modules like depth from stereo or depth from shading can recover some of the surface geometry of the scene. Recent advances in fast range imaging have however paved the way towards 3D computer vision, since range data of the scene can now be obtained with sufficient accuracy and speed for object recognition and pose estimation purposes. This article proposes the coded-light range-imaging method together with superquadric segmentation to approach this task. Superquadric segments are volumetric primitives that describe global object properties with 5 parameters, which provide the main features for object recognition. Besides, the principle axes of a superquadric segment determine the phase of an object in the scene. The volumetric segmentation of a range image can be used to detect missing, false or badly placed components on assembled printed circuit boards. Furthermore, this approach will be useful to recognize and extract valuable or toxic electronic components on printed circuit boards scrap that currently burden the environment during electronic waste processing. Results on synthetic range images with errors constructed according to a verified noise model illustrate the capabilities of this approach.

Implementation of ASME Code, Section XI, Code Case N-770, on Alternative Examination Requirements for Class 1 Butt Welds Fabricated with Alloy 82/182

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, Edmund J.; Anderson, Michael T.

In May 2010, the NRC issued a proposed notice of rulemaking that includes a provision to add a new section to its rules to require licensees to implement ASME Code Case N-770, ‘‘Alternative Examination Requirements and Acceptance Standards for Class 1 PWR Piping and Vessel Nozzle Butt Welds Fabricated with UNS N06082 or UNS W86182 Weld Filler Material With or Without the Application of Listed Mitigation Activities, Section XI, Division 1,’’ with 15 conditions. Code Case N-770 contains baseline and inservice inspection (ISI) requirements for unmitigated butt welds fabricated with Alloy 82/182 material and preservice and ISI requirements for mitigatedmore » butt welds. The NRC stated that application of ASME Code Case N-770 is necessary because the inspections currently required by the ASME Code, Section XI, were not written to address stress corrosion cracking Alloy 82/182 butt welds, and the safety consequences of inadequate inspections can be significant. The NRC expects to issue the final rule incorporating this code case into its regulations in the spring 2011 time frame. This paper discusses the new examination requirements, the conditions that NRC is imposing , and the major concerns with implementation of the new Code Case.« less

High-speed three-dimensional measurements with a fringe projection-based optical sensor

NASA Astrophysics Data System (ADS)

Bräuer-Burchardt, Christian; Breitbarth, Andreas; Kühmstedt, Peter; Notni, Gunther

2014-11-01

An optical three-dimensional (3-D) sensor based on a fringe projection technique that realizes the acquisition of the surface geometry of small objects was developed for highly resolved and ultrafast measurements. It realizes a data acquisition rate up to 60 high-resolution 3-D datasets per second. The high measurement velocity was achieved by consequent fringe code reduction and parallel data processing. The reduction of the length of the fringe image sequence was obtained by omission of the Gray code sequence using the geometric restrictions of the measurement objects and the geometric constraints of the sensor arrangement. The sensor covers three different measurement fields between 20 mm×20 mm and 40 mm×40 mm with a spatial resolution between 10 and 20 μm, respectively. In order to obtain a robust and fast recalibration of the sensor after change of the measurement field, a calibration procedure based on single shot analysis of a special test object was applied which works with low effort and time. The sensor may be used, e.g., for quality inspection of conductor boards or plugs in real-time industrial applications.

78 FR 75553 - Cedar Rapids Water Board; Notice of Application Accepted for Filing, Soliciting Comments, Motions...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-12

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 4344-011] Cedar Rapids Water Board; Notice of Application Accepted for Filing, Soliciting Comments, Motions To Intervene, and Protests Take notice that the following hydroelectric application has been filed with the Commission and is available for public inspection: a. Type o...

20 CFR 200.2 - The general course and method by which the Board's functions are channeled and determined.

Code of Federal Regulations, 2011 CFR

2011-04-01

... to the nearest field office of the Board. That office inspects the applications to detect errors and..., the claimant executes a registration and claim for unemployment insurance benefits (Form UI-3). In... openings, detecting errors and omissions, and noting items requiring investigation. The claim is then...

Projector-Based Augmented Reality for Quality Inspection of Scanned Objects

NASA Astrophysics Data System (ADS)

Kern, J.; Weinmann, M.; Wursthorn, S.

2017-09-01

After scanning or reconstructing the geometry of objects, we need to inspect the result of our work. Are there any parts missing? Is every detail covered in the desired quality? We typically do this by looking at the resulting point clouds or meshes of our objects on-screen. What, if we could see the information directly visualized on the object itself? Augmented reality is the generic term for bringing virtual information into our real environment. In our paper, we show how we can project any 3D information like thematic visualizations or specific monitoring information with reference to our object onto the object's surface itself, thus augmenting it with additional information. For small objects that could for instance be scanned in a laboratory, we propose a low-cost method involving a projector-camera system to solve this task. The user only needs a calibration board with coded fiducial markers to calibrate the system and to estimate the projector's pose later on for projecting textures with information onto the object's surface. Changes within the projected 3D information or of the projector's pose will be applied in real-time. Our results clearly reveal that such a simple setup will deliver a good quality of the augmented information.

75 FR 80677 - The Low-Income Definition

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-23

... original regulatory text so it is consistent with the geo-coding software the agency uses to make the low... Union Act (Act) authorizes the NCUA Board (Board) to define ``low-income members'' so that credit unions... process of implementing geo- coding software to make the calculation automatically for credit unions...

Requirements for Printed Wiring Boards

NASA Technical Reports Server (NTRS)

1984-01-01

In order to maintain the high standards of the NASA printed wiring programs, this publication: prescribes NASA's requirements for assuring reliable rigid printed wiring boards; describes and incorporates basic considerations necessary to assure reliable rigid printed wiring boards; establishes the supplier's responsibility to train and certify personnel; provides for supplier documentation of the fabrication and inspection procedures to be used for NASA work, including supplier innovations and changes in technology; and provides visual workmanship standards to aid those responsible for determining quality conformance to the established requirements.

Plumbing and Piping: Construction, Supervision, and Inspection. Course of Study.

ERIC Educational Resources Information Center

O'Meara, Lester; Turley, John

This course of study on plumbing and piping is part of a construction, supervision, and inspection series, which provides instructional materials for community or junior college technical courses in the inspection program. Material covered in this volume pertains to: uniform plumbing code; pipes, fittings, supports, and connections; sewer and…

Sensor fusion of phase measuring profilometry and stereo vision for three-dimensional inspection of electronic components assembled on printed circuit boards.

PubMed

Hong, Deokhwa; Lee, Hyunki; Kim, Min Young; Cho, Hyungsuck; Moon, Jeon Il

2009-07-20

Automatic optical inspection (AOI) for printed circuit board (PCB) assembly plays a very important role in modern electronics manufacturing industries. Well-developed inspection machines in each assembly process are required to ensure the manufacturing quality of the electronics products. However, generally almost all AOI machines are based on 2D image-analysis technology. In this paper, a 3D-measurement-method-based AOI system is proposed consisting of a phase shifting profilometer and a stereo vision system for assembled electronic components on a PCB after component mounting and the reflow process. In this system information from two visual systems is fused to extend the shape measurement range limited by 2pi phase ambiguity of the phase shifting profilometer, and finally to maintain fine measurement resolution and high accuracy of the phase shifting profilometer with the measurement range extended by the stereo vision. The main purpose is to overcome the low inspection reliability problem of 2D-based inspection machines by using 3D information of components. The 3D shape measurement results on PCB-mounted electronic components are shown and compared with results from contact and noncontact 3D measuring machines. Based on a series of experiments, the usefulness of the proposed sensor system and its fusion technique are discussed and analyzed in detail.

Continuous integration and quality control for scientific software

NASA Astrophysics Data System (ADS)

Neidhardt, A.; Ettl, M.; Brisken, W.; Dassing, R.

2013-08-01

Modern software has to be stable, portable, fast and reliable. This is going to be also more and more important for scientific software. But this requires a sophisticated way to inspect, check and evaluate the quality of source code with a suitable, automated infrastructure. A centralized server with a software repository and a version control system is one essential part, to manage the code basis and to control the different development versions. While each project can be compiled separately, the whole code basis can also be compiled with one central “Makefile”. This is used to create automated, nightly builds. Additionally all sources are inspected automatically with static code analysis and inspection tools, which check well-none error situations, memory and resource leaks, performance issues, or style issues. In combination with an automatic documentation generator it is possible to create the developer documentation directly from the code and the inline comments. All reports and generated information are presented as HTML page on a Web server. Because this environment increased the stability and quality of the software of the Geodetic Observatory Wettzell tremendously, it is now also available for scientific communities. One regular customer is already the developer group of the DiFX software correlator project.

49 CFR 840.1 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-10-01

... accident notification requirements, and its authority for inspection, examination, and testing of physical evidence, and describes the exercise of the Safety Board's priority accorded to its activities when...

24 CFR 232.522 - Inspection fee.

Code of Federal Regulations, 2011 CFR

2011-04-01

... INSURANCE FOR NURSING HOMES, INTERMEDIATE CARE FACILITIES, BOARD AND CARE HOMES, AND ASSISTED LIVING FACILITIES Eligibility Requirements-Supplemental Loans To Finance Purchase and Installation of Fire Safety...

49 CFR 178.338-16 - Inspection and testing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Inspection and testing. 178.338-16 Section 178.338... PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.338-16 Inspection and testing... Section VIII of the ASME Code. The welder and the welding procedure must be qualified in accordance with...

Using Gemba Boards to Facilitate Evidence-Based Practice in Critical Care.

PubMed

Bourgault, Annette M; Upvall, Michele J; Graham, Alison

2018-06-01

Tradition-based practices lack supporting research evidence and may be harmful or ineffective. Engagement of key stakeholders is a critical step toward facilitating evidence-based practice change. Gemba , derived from Japanese, refers to the real place where work is done. Gemba boards (visual management tools) appear to be an innovative method to engage stakeholders and facilitate evidence-based practice. To explore the use of gemba boards and gemba huddles to facilitate practice change. Twenty-two critical care nurses participated in interviews in this qualitative, descriptive study. Thematic analysis was used to code and categorize interview data. Two researchers reached consensus on coding and derived themes. Data were managed with qualitative analysis software. The code gemba occurred most frequently; a secondary analysis was performed to explore its impact on practice change. Four themes were derived from the gemba code: (1) facilitation of staff, leadership, and interdisciplinary communication, (2) transparency of outcome data, (3) solicitation of staff ideas and feedback, and (4) dissemination of practice changes. Gemba boards and gemba huddles became part of the organizational culture for promoting and disseminating evidence-based practices. Unit-based, publicly located gemba boards and huddles have become key components of evidence-based practice culture. Gemba is both a tool and a process to engage team members and the public to generate clinical questions and to plan, implement, and evaluate practice changes. Future research on the effectiveness of gemba boards to facilitate evidence-based practice is warranted. ©2018 American Association of Critical-Care Nurses.

75 FR 30900 - Sunshine Act Meetings; Unified Carrier Registration Plan Board of Directors

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-02

.... Avelino Gutierrez at (505) 827-4565 to receive the toll free number and pass code needed to participate in... Board. FOR FURTHER INFORMATION CONTACT: Mr. Avelino Gutierrez, Chair, Unified Carrier Registration Board...

Equipment Readiness Code Rule System (ERCRULES)

DTIC Science & Technology

1988-06-01

Food inspection...CAA-SR-88-14 branch = ahs and equipment = ’Water quality set"’ or equipment = ’ Food inspection set’ then erc-assigned = [unitcriticalfacility,’ERC A...8217,𔃿.5.15𔃻. if not branch = qms and not branch = ahs and equipment = ’Water quality set’’ or equipment = ’ Food inspection set’ then

46 CFR 189.20-15 - Scope of inspection.

Code of Federal Regulations, 2014 CFR

2014-10-01

... appliances, fire detecting and extinguishing equipment, pilot boarding equipment, pollution prevention... accordance with approved plans, and determine that the vessel is in possession of a valid certificate issued...

46 CFR 189.20-15 - Scope of inspection.

Code of Federal Regulations, 2012 CFR

2012-10-01

... appliances, fire detecting and extinguishing equipment, pilot boarding equipment, pollution prevention... accordance with approved plans, and determine that the vessel is in possession of a valid certificate issued...

46 CFR 189.20-15 - Scope of inspection.

Code of Federal Regulations, 2013 CFR

2013-10-01

... appliances, fire detecting and extinguishing equipment, pilot boarding equipment, pollution prevention... accordance with approved plans, and determine that the vessel is in possession of a valid certificate issued...

46 CFR 189.20-15 - Scope of inspection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... appliances, fire detecting and extinguishing equipment, pilot boarding equipment, pollution prevention... accordance with approved plans, and determine that the vessel is in possession of a valid certificate issued...

46 CFR 189.20-15 - Scope of inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... appliances, fire detecting and extinguishing equipment, pilot boarding equipment, pollution prevention... accordance with approved plans, and determine that the vessel is in possession of a valid certificate issued...

Steel Spans,

DTIC Science & Technology

1984-01-31

armoured cars of our battalion protected on the streets of Petersburg the risen workers from the gendarmes and faithful to the tsar military units. At...Vasilyevich was the soul of soldier, our leader. €.5 Each armoured car then had its name. It was written by large/coarse letters on the boards...brigade of drivers. They inspect vehicles, they service them with gasoline. Georgiy Vasilyevich lies/rests under the armoured car and something inspects

Fundamental study of microelectronic chip response under laser ultrasonic-interferometric inspection using C-scan method

NASA Astrophysics Data System (ADS)

Yang, Lei; Gong, Jie; Ume, I. Charles

2014-02-01

In modern surface mount packaging technologies, such as flip chips, chip scale packages, and ball grid arrays(BGA), chips are attached to the substrates/printed wiring board (PWB) using solder bump interconnections. The quality of solder bumps between the chips and the substrate/board is difficult to inspect. Laser ultrasonic-interferometric technique was proved to be a promising approach for solder bump inspection because of its noncontact and nondestructive characteristics. Different indicators extracted from received signals have been used to predict the potential defects, such as correlation coefficient, error ratio, frequency shifting, etc. However, the fundamental understanding of the chip behavior under laser ultrasonic inspection is still missing. Specifically, it is not sure whether the laser interferometer detected out-of-plane displacements were due to wave propagation or structural vibration when the chip was excited by pulsed laser. Plus, it is found that the received signals are chip dependent. Both challenges impede the interpretation of acquired signals. In this paper, a C-scan method was proposed to study the underlying phenomenon during laser ultrasonic inspection. The full chip was inspected. The response of the chip under laser excitation was visualized in a movie resulted from acquired signals. Specifically, a BGA chip was investigated to demonstrate the effectiveness of this method. By characterizing signals using discrete wavelet transform(DWT), both ultrasonic wave propagation and vibration were observed. Separation of them was successfully achieved using ideal band-pass filter and visualized in resultant movies, too. The observed ultrasonic waves were characterized and their respective speeds were measured by applying 2-D FFT. The C-scan method, combined with different digital signal processing techniques, was proved to be an very effective methodology to learn the behavior of chips under laser excitation. This general procedure can be applied to any unknown chip before inspection. A wealth of information can be provided by this learning procedure, which greatly benefits the interpretation of inspection signals afterwards.

An intelligent system for real time automatic defect inspection on specular coated surfaces

NASA Astrophysics Data System (ADS)

Li, Jinhua; Parker, Johné M.; Hou, Zhen

2005-07-01

Product visual inspection is still performed manually or semi automatically in most industries from simple ceramic tile grading to complex automotive body panel paint defect and surface quality inspection. Moreover, specular surfaces present additional challenge to conventional vision systems due to specular reflections, which may mask the true location of objects and lead to incorrect measurements. There are some sophisticated visual inspection methods developed in recent years. Unfortunately, most of them are highly computational. Systems built on those methods are either inapplicable or very costly to achieve real time inspection. In this paper, we describe an integrated low-cost intelligent system developed to automatically capture, extract, and segment defects on specular surfaces with uniform color coatings. The system inspects and locates regular surface defects with lateral dimensions as small as a millimeter. The proposed system is implemented on a group of smart cameras using its on-board processing ability to achieve real time inspection. The experimental results on real test panels demonstrate the effectiveness and robustness of proposed system.

An Olive Branch for Boards.

ERIC Educational Resources Information Center

Harrington-Lueker, Donna

1993-01-01

Peacekeeping strategies for school-board meetings include developing a code of conduct that spells out guidelines for behavior and then enforcing it; bringing in a neutral observer to help board members work through what is really worrying them; and concentrating on policy. (MLF)

47 CFR 0.457 - Records not routinely available for public inspection.

Code of Federal Regulations, 2012 CFR

2012-10-01

... inspection. (5) Section 1905 of the federal criminal code, the Trade Secrets Act, 18 U.S.C. 1905, prohibits... inspection, 5 U.S.C. 552(b)(4) and 18 U.S.C. 1905. (1) The materials listed in this paragraph have been... video programming distributors. (v) The rates, terms and conditions in any agreement between a U.S...

47 CFR 0.457 - Records not routinely available for public inspection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... inspection. (5) Section 1905 of the federal criminal code, the Trade Secrets Act, 18 U.S.C. 1905, prohibits... inspection, 5 U.S.C. 552(b)(4) and 18 U.S.C. 1905. (1) The materials listed in this paragraph have been... video programming distributors. (v) The rates, terms and conditions in any agreement between a U.S...

Video rate morphological processor based on a redundant number representation

NASA Astrophysics Data System (ADS)

Kuczborski, Wojciech; Attikiouzel, Yianni; Crebbin, Gregory A.

1992-03-01

This paper presents a video rate morphological processor for automated visual inspection of printed circuit boards, integrated circuit masks, and other complex objects. Inspection algorithms are based on gray-scale mathematical morphology. Hardware complexity of the known methods of real-time implementation of gray-scale morphology--the umbra transform and the threshold decomposition--has prompted us to propose a novel technique which applied an arithmetic system without carrying propagation. After considering several arithmetic systems, a redundant number representation has been selected for implementation. Two options are analyzed here. The first is a pure signed digit number representation (SDNR) with the base of 4. The second option is a combination of the base-2 SDNR (to represent gray levels of images) and the conventional twos complement code (to represent gray levels of structuring elements). Operation principle of the morphological processor is based on the concept of the digit level systolic array. Individual processing units and small memory elements create a pipeline. The memory elements store current image windows (kernels). All operation primitives of processing units apply a unified direction of digit processing: most significant digit first (MSDF). The implementation technology is based on the field programmable gate arrays by Xilinx. This paper justified the rationality of a new approach to logic design, which is the decomposition of Boolean functions instead of Boolean minimization.

40 CFR 52.1078 - Extensions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... second generation On-board Diagnostics (OBD-II) equipped motor vehicles as part of its inspection and...-II checks (for 1996-and-newer OBD-II equipped vehicles) as an element of the Commonwealth's I/M...

Automated Visual Inspection Of Integrated Circuits

NASA Astrophysics Data System (ADS)

Noppen, G.; Oosterlinck, Andre J.

1989-07-01

One of the major application fields of image processing techniques is the 'visual inspection'. For a number of rea-sons, the automated visual inspection of Integrated Circuits (IC's) has drawn a lot of attention. : Their very strict design makes them very suitable for an automated inspection. : There is already a lot of experience in the comparable Printed Circuit Board (PCB) and mask inspection. : The mechanical handling of wafers and dice is already an established technology. : Military and medical IC's should be a 100 % failproof. : IC inspection gives a high and allinost immediate payback. In this paper we wil try to give an outline of the problems involved in IC inspection, and the algorithms and methods used to overcome these problems. We will not go into de-tail, but we will try to give a general understanding. Our attention will go to the following topics. : An overview of the inspection process, with an emphasis on the second visual inspection. : The problems encountered in IC inspection, as opposed to the comparable PCB and mask inspection. : The image acquisition devices that can be used to obtain 'inspectable' images. : A general overview of the algorithms that can be used. : A short description of the algorithms developed at the ESAT-MI2 division of the katholieke Universiteit Leuven.

40 CFR 52.2320 - Identification of plan.

Code of Federal Regulations, 2012 CFR

2012-07-01

... dated February 5, 1985, HAFB AO for Paint Booth, HVAC Modification, Standby Generators, and Fuel Storage... implementation of the inspection of vehicle On-Board Diagnostic (OBD) systems starting January 1, 2002 in all...

40 CFR 52.2320 - Identification of plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

... dated February 5, 1985, HAFB AO for Paint Booth, HVAC Modification, Standby Generators, and Fuel Storage... implementation of the inspection of vehicle On-Board Diagnostic (OBD) systems starting January 1, 2002 in all...

40 CFR 52.2320 - Identification of plan.

Code of Federal Regulations, 2013 CFR

2013-07-01

... dated February 5, 1985, HAFB AO for Paint Booth, HVAC Modification, Standby Generators, and Fuel Storage... implementation of the inspection of vehicle On-Board Diagnostic (OBD) systems starting January 1, 2002 in all...

KENNEDY SPACE CENTER, FLA. - In the Columbia Debris Hangar, members of the Stafford-Covey Return to Flight Task Group (SCTG) inspect some of the debris. Chairing the task group are Richard O. Covey, former Space Shuttle commander, and Thomas P. Stafford (fourth from left), Apollo commander. Chartered by NASA Administrator Sean O’Keefe, the task group will perform an independent assessment of NASA’s implementation of the final recommendations by the Columbia Accident Investigation Board.

NASA Image and Video Library

2003-08-05

KENNEDY SPACE CENTER, FLA. - In the Columbia Debris Hangar, members of the Stafford-Covey Return to Flight Task Group (SCTG) inspect some of the debris. Chairing the task group are Richard O. Covey, former Space Shuttle commander, and Thomas P. Stafford (fourth from left), Apollo commander. Chartered by NASA Administrator Sean O’Keefe, the task group will perform an independent assessment of NASA’s implementation of the final recommendations by the Columbia Accident Investigation Board.

Port Authority of New York & New Jersey

Science.gov Websites

Action Program Corporate Information Governance and Ethics > Board of Commissioners > PA Leadership > By-Laws > Transparency in Governance > Board Committee Charters > Code of Ethics for

Thermal Protection System Imagery Inspection Management System -TIIMS

NASA Technical Reports Server (NTRS)

Goza, Sharon; Melendrez, David L.; Henningan, Marsha; LaBasse, Daniel; Smith, Daniel J.

2011-01-01

TIIMS is used during the inspection phases of every mission to provide quick visual feedback, detailed inspection data, and determination to the mission management team. This system consists of a visual Web page interface, an SQL database, and a graphical image generator. These combine to allow a user to ascertain quickly the status of the inspection process, and current determination of any problem zones. The TIIMS system allows inspection engineers to enter their determinations into a database and to link pertinent images and video to those database entries. The database then assigns criteria to each zone and tile, and via query, sends the information to a graphical image generation program. Using the official TIPS database tile positions and sizes, the graphical image generation program creates images of the current status of the orbiter, coloring zones, and tiles based on a predefined key code. These images are then displayed on a Web page using customized JAVA scripts to display the appropriate zone of the orbiter based on the location of the user's cursor. The close-up graphic and database entry for that particular zone can then be seen by selecting the zone. This page contains links into the database to access the images used by the inspection engineer when they make the determination entered into the database. Status for the inspection zones changes as determinations are refined and shown by the appropriate color code.

Health and Safety in Family Day Care Homes: Association Between Regulatory Non-compliance and Lower Median Income.

PubMed

Rosenthal, Marjorie S; Jeon, Sangchoon; Crowley, Angela A

2016-05-01

To determine frequency of non-compliance with child care regulations among family day care homes (FDCH) and identify the role of income in compliance. We analyzed non-compliance in 746 routine, unannounced inspection and re-inspection reports of FDCH collected by the Connecticut Department of Public Health licensing specialists in 2007-2008 and linked results to median income of zip code data. We grouped the 83 state regulations into 12 regulation categories, analyzed 11 categories, and used latent class analysis to classify each FDCH as high or low compliance for each category. We used logistic regression analysis to estimate the odds ratios of low compliance. Among the 746 FDCH inspections (594 first inspections and 152 re-inspections), we found high rates of non-compliance in inspection regulations in immunizations (32.9 %), water temperature (35.6 %) and hazards (30.0 %). Among the 11 regulation categories, 4 categories (indoor safety, emergency preparedness, child/family/staff documentation, and qualifications of provider) had regulations with high non-compliance. Median household income of FDCH zip code was lower for re-inspection sites than for inspection sites ($34,715 vs. $57,118, p < 0.0001) and FDCH in the lowest quartile of income had greater odds of low compliance in indoor safety (OR 1.86, 95 % CI 1.04, 3.35, p < 0.05). The majority of FDCH were in compliance with the majority of regulations, yet there are glaring non-compliance issues in inspections and re-inspections and there are income-based inequities that place children at higher risk who are already at high risk for suboptimal health outcomes.

Sensor Authentication: Embedded Processor Code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Svoboda, John

2012-09-25

Described is the c code running on the embedded Microchip 32bit PIC32MX575F256H located on the INL developed noise analysis circuit board. The code performs the following functions: Controls the noise analysis circuit board preamplifier voltage gains of 1, 10, 100, 000 Initializes the analog to digital conversion hardware, input channel selection, Fast Fourier Transform (FFT) function, USB communications interface, and internal memory allocations Initiates high resolution 4096 point 200 kHz data acquisition Computes complex 2048 point FFT and FFT magnitude. Services Host command set Transfers raw data to Host Transfers FFT result to host Communication error checking

Evaluation of multilayer printed wiring boards by metallographic techniques: An illustrated guide to the preparation and inspection of plated-through hole test coupons based on the requirements of Mil-P-55110D

NASA Technical Reports Server (NTRS)

Jellison, J.

1986-01-01

This work is an illustrated handbook containing the rationale and procedure for the evaluation of multilayer printed wiring board construction integrity with respect to plated-through holes in accordance with the requirements of MIL-P-55110D, Printed Wiring Boards. It is intended as a practical aid for those concerned with determining the construction integrity of multilayer boards for high reliability applications. Photomicrographs of cross sectioned holes illustrate defect types, acceptable and unacceptable conditions, and methods of measurement. A procedure for specimen preparation is given, and appropriate paragraphs of the military specification are included and explained.

77 FR 9723 - Department of State Performance Review Board Members

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-17

... DEPARTMENT OF STATE [Public Notice: 7802] Department of State Performance Review Board Members In accordance with section 4314(c)(4) of 5 United States Code, the Department of State has appointed the following individuals to the Department of State Performance Review Board for Senior [[Page 9724

76 FR 62893 - Department of State Performance Review Board Members

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-11

... DEPARTMENT OF STATE [Public Notice: 7639] Department of State Performance Review Board Members In accordance with section 4314(c)(4) of 5 United States Code, the Department of State has appointed the following individuals to the Department of State Performance Review Board for Senior Executive Service...

Alaska Department of Natural Resources

Science.gov Websites

can link to our own pages containing those materials or information, (2) create coding such that a NEW and Commissions Board of Agriculture Board of Forestry Community Forest Council Forest Stewardship Conservation & Development Board Historical Commission Boating Safety Advisory Council Outdoor Recreation

A Thematic Analysis of Online Discussion Boards for Vasectomy.

PubMed

Samplaski, Mary K

2018-01-01

To examine posts on Internet discussion groups related to vasectomies, and identify common ideas through a structured theme analysis. Internet discussion boards were identified using the search term "vasectomy." Three discussion boards were identified as having the most posts and were chosen for analysis. Using an iterative and structured analysis process, each post was analyzed using thematic analysis in 3 steps (open coding, axial coding, and selective coding) to determine common themes. A total of 129 posts were analyzed. The most common posts related to changes in sexual function after vasectomy. The second most common theme was pain after vasectomy. There were also posts about considerations before vasectomy, planning for postvasectomy care, what to expect after vasectomy, potential issues after vasectomy and how to manage these, and feelings about vasectomy. Some of the information present did not have a factual basis. Posts dedicated to postvasectomy pain and sexual dysfunction were of the highest quantity. There was no medical provider input to these discussion boards. Educational efforts should be targeted to these areas and should include a health-care professional. Copyright © 2017 Elsevier Inc. All rights reserved.

Compact low-noise preamplifier for noise spectroscopy with biased photodiodes in cargo inspection systems

NASA Astrophysics Data System (ADS)

Benetti, Bob; Langeveld, Willem G. J.

2013-09-01

Noise Spectroscopy, a.k.a. Z-determination by Statistical Count-rate ANalysis (Z-SCAN), is a statistical technique to determine a quantity called the "noise figure" from digitized waveforms of pulses of transmitted x-rays in cargo inspection systems. Depending only on quantities related to the x-ray energies, it measures a characteristic of the transmitted x-ray spectrum, which depends on the atomic number, Z, of the material penetrated. The noise figure can thus be used for material separation. In an 80-detector prototype, scintillators are used with large-area photodiodes biased at 80V and digitized using 50-MSPS 12-bit ADC boards. We present an ultra-compact low-noise preamplifier design, with one high-gain and one low-gain channel per detector for improved dynamic range. To achieve adequate detection sensitivity and spatial resolution each dual-gain preamplifier channel must fit within a 12.7 mm wide circuit board footprint and maintain adequate noise immunity to conducted and radiated interference from adjacent channels. The novel design included iterative SPICE analysis of transient response, dynamic range, frequency response, and noise analysis to optimize the selection and configuration of amplifiers and filter response. We discuss low-noise active and passive components and low-noise techniques for circuit board layout that are essential to achieving the design goals, and how the completed circuit board performed in comparison to the predicted responses.

26 CFR 1.42-5 - Monitoring compliance with low-income housing credit requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... be required to retain the original local health, safety, or building code violation reports or... account local health, safety, and building codes (or other habitability standards), and the State or local government unit responsible for making local health, safety, or building code inspections did not issue a...

26 CFR 1.42-5 - Monitoring compliance with low-income housing credit requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... be required to retain the original local health, safety, or building code violation reports or... account local health, safety, and building codes (or other habitability standards), and the State or local government unit responsible for making local health, safety, or building code inspections did not issue a...

Bar Coding the U. S. Government Bill of Lading and the Material Inspection and Receiving Report.

DTIC Science & Technology

1984-12-01

of respondents K because some of the replies did not respond to this question.) TABLE 3-2. DD 250 PROCESSING CAPABILITIES AUTOMiATED - BAR CODE...Proposed minimum data elements (both human readable and bar coded) required and why? (3) Proposed signature requirement changes and why? (4) Proposed

Manual for Public School Facilities Fire Prevention and Fire Inspections. [Revised].

ERIC Educational Resources Information Center

New York State Education Dept., Albany.

Designed to provide instruction for New York State inspectors and school administrators completing the annual "Fire Safety Report," this document provides information regarding: (1) the Regulation and Code requirements; (2) inspection and enforcement processes; (3) disputes and procedures for appeal; and (4) financial considerations…

National Program for Inspection of Non-Federal Dams. Beaver Dam Lake Dam (CT 00083), Housatonic River Basin, Stratford, Connecticut. Phase I Inspection Report.

DTIC Science & Technology

1979-05-01

b. Weir and Training Walls Flash board pins ( rebars ) attached to weir crest -. General Condition of Concrete Masonry cut stone weir Rust or...None apparent Pavement Condition Not paved, grass, some -:osion due to traffic .. *.EI Movement or Settlement of Crest Evidence of past movement of...Condition at Abutment and at Concrete Good ,EI Structures -EI Indications of Movement of Structural Approximately 3" of movement of Items on Slopes gate

Acousto-ultrasonic system for the inspection of composite armored vehicles

NASA Astrophysics Data System (ADS)

Godinez, Valery F.; Carlos, Mark F.; Delamere, Michael; Hoch, William; Fotopoulos, Christos; Dai, Weiming; Raju, Basavaraju B.

2001-04-01

In this paper the design and implementation of a unique acousto-ultrasonics system for the inspection of composite armored vehicles is discussed. The system includes a multi-sensor probe with a position-tracking device mounted on a computer controlled scanning bridge. The system also includes an arbitrary waveform generator with a multiplexer and a multi-channel acoustic emission board capable of simultaneously collecting and processing up to four acoustic signals in real time. C-scans of an armored vehicle panel with defects are presented.

Command and Telemetry Latency Effects on Operator Performance during International Space Station Robotics Operations

NASA Technical Reports Server (NTRS)

Currie, Nancy J.; Rochlis, Jennifer

2004-01-01

International Space Station (ISS) operations will require the on-board crew to perform numerous robotic-assisted assembly, maintenance, and inspection activities. Current estimates for some robotically performed maintenance timelines are disproportionate and potentially exceed crew availability and duty times. Ground-based control of the ISS robotic manipulators, specifically the Special Purpose Dexterous Manipulator (SPDM), is being examined as one potential solution to alleviate the excessive amounts of crew time required for extravehicular robotic maintenance and inspection tasks.

22 CFR 1300.4 - Operations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... financial work for the Board. (b) Rules published in the Federal Register and codified in this title of the Code of Federal Regulations. (c) Meetings of the Board of Directors conducted pursuant to the...

Energy Codes at a Glance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Pamala C.; Richman, Eric E.

2008-09-01

Feeling dim from energy code confusion? Read on to give your inspections a charge. The U.S. Department of Energy’s Building Energy Codes Program addresses hundreds of inquiries from the energy codes community every year. This article offers clarification for topics of confusion submitted to BECP Technical Support of interest to electrical inspectors, focusing on the residential and commercial energy code requirements based on the most recently published 2006 International Energy Conservation Code® and ANSI/ASHRAE/IESNA1 Standard 90.1-2004.

Technology Infusion of CodeSonar into the Space Network Ground Segment

NASA Technical Reports Server (NTRS)

Benson, Markland J.

2009-01-01

This slide presentation reviews the applicability of CodeSonar to the Space Network software. CodeSonar is a commercial off the shelf system that analyzes programs written in C, C++ or Ada for defects in the code. Software engineers use CodeSonar results as an input to the existing source code inspection process. The study is focused on large scale software developed using formal processes. The systems studied are mission critical in nature but some use commodity computer systems.

40 CFR Appendix III to Subpart S... - As-Received Inspection

Code of Federal Regulations, 2010 CFR

2010-07-01

...) General Compliance Provisions for Control of Air Pollution From New and In-Use Light-Duty Vehicles, Light... Reading 7. Build Date 8. MIL light on/off status 9. Readiness code status 10. Stored OBD codes 11.Any...

77 FR 17333 - Bylaws of the Board of Governors

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-26

... POSTAL SERVICE 39 CFR Parts 4, 6, and 7 Bylaws of the Board of Governors AGENCY: Postal Service. ACTION: Final rule. SUMMARY: On March 24, 2010, the Board of Governors of the United States Postal... the Code of Federal Regulations are effective March 26, 2012. FOR FURTHER INFORMATION CONTACT: Julie S...

78 FR 46549 - Approval and Promulgation of Implementation Plans; Idaho: State Board Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

... such board or body or the head of an executive agency with similar powers be adequately disclosed.'' 42... Requirements Idaho Code Sec. 39-107, Board--Composition--Officers-- Compensation--Powers--Subpoena--Depositions... regard to their knowledge of and interest in solid waste; two (2) members shall be chosen for their...

Virginia Board of Education Student Code of Conduct Policy Guidelines

ERIC Educational Resources Information Center

Virginia Department of Education, 2015

2015-01-01

The Virginia Board of Education's "Student Conduct Policy Guidelines" were first developed in 1994 in response to action by the 1993 General Assembly requiring the Virginia Board of Education to establish such guidelines. In 2004, the "Guidelines" underwent a major revision in response to requirements of § 22.1-279.6. of the…

9 CFR 201.71 - Scales; accurate weights, repairs, adjustments or replacements after inspection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... contractors, market agencies, dealers, packers, and live poultry dealers to weigh livestock, livestock.... All approved material is available for inspection at the National Archives and Records Administration... http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. Also, it is...

Quick Tips for Buying Medicines Over the Internet: A Consumer Safety Guide

MedlinePlus

... Laser Products Other Resources State Pharmacy Boards Federal Trade Commission U.S. Customs and Border Protection Spotlight A ... Products Advisory Committees Regulatory Information Safety Emergency Preparedness International Programs News & Events Training & Continuing Education Inspections & Compliance ...

77 FR 48523 - The President's Management Advisory Board (PMAB); Notification of Upcoming Public Advisory Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-14

... Administration, 1776 G Street NW., Washington, DC 20006, at [email protected] . SUPPLEMENTARY INFORMATION... available for public inspection and copying in PMAB offices at GSA, 1776 G Street NW., Washington, DC 20006...

12 CFR 1710.14 - Code of conduct and ethics.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 7 2011-01-01 2011-01-01 false Code of conduct and ethics. 1710.14 Section... Code of conduct and ethics. (a) General. An Enterprise shall establish and administer a written code of conduct and ethics that is reasonably designed to assure the ability of board members, executive officers...

12 CFR 1710.14 - Code of conduct and ethics.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Code of conduct and ethics. 1710.14 Section... Code of conduct and ethics. (a) General. An Enterprise shall establish and administer a written code of conduct and ethics that is reasonably designed to assure the ability of board members, executive officers...

12 CFR 1710.14 - Code of conduct and ethics.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 9 2012-01-01 2012-01-01 false Code of conduct and ethics. 1710.14 Section... Code of conduct and ethics. (a) General. An Enterprise shall establish and administer a written code of conduct and ethics that is reasonably designed to assure the ability of board members, executive officers...

12 CFR 1710.14 - Code of conduct and ethics.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 10 2014-01-01 2014-01-01 false Code of conduct and ethics. 1710.14 Section... Code of conduct and ethics. (a) General. An Enterprise shall establish and administer a written code of conduct and ethics that is reasonably designed to assure the ability of board members, executive officers...

12 CFR 1710.14 - Code of conduct and ethics.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 9 2013-01-01 2013-01-01 false Code of conduct and ethics. 1710.14 Section... Code of conduct and ethics. (a) General. An Enterprise shall establish and administer a written code of conduct and ethics that is reasonably designed to assure the ability of board members, executive officers...

Central Heat Plant Modernization: FY98 Update and Recommendations.

DTIC Science & Technology

1999-12-01

Boiler and Pressure Vessel Code suggests an inspection frequency of 12 months for...28 April 1997). ASME International, Boiler and Pressure Vessel Code (ASME International, New York, NY, 1995). Bloomquist, R.G., J.D. Nimmons, and K...Services (HQDA, 28 April 1997). ASME International, Boiler and Pressure Vessel Code (ASME International, New York, NY, 1995). Bloomquist, R.G.,

Ultrasonic Inspection and Fatigue Evaluation of Critical Pore Size in Welds.

DTIC Science & Technology

1981-09-01

Boiler and Pressure Vessel Code ) 20...Five porosity levels were produced that parallelled ASME boiler and pressure vessel code specification (Section VIII). Appendix IV of the pressure...Figure 2 shows porosity charts (ASME Boiler and Pressure Vessel Code ) which classify and designate the number and size of pores in any six inch length

Supercritical and Transcritical Shear Flows in Microgravity: Experiments and Direct Numerical Simulations

DTIC Science & Technology

2006-08-01

Boiler and Pressure Vessel Code were con...GRC, and to specifically state a general operating requirement. 1.1. The entire apparatus will be designed to ASME Boiler and Pressure Vessel Code , whenever...calculations, including a finite element analysis (FEA) will be inspected to verify the ASME Boiler and Pressure Vessel Code has been me, whenever

Embedding QR codes in tumor board presentations, enhancing educational content for oncology information management.

PubMed

Siderits, Richard; Yates, Stacy; Rodriguez, Arelis; Lee, Tina; Rimmer, Cheryl; Roche, Mark

2011-01-01

Quick Response (QR) Codes are standard in supply management and seen with increasing frequency in advertisements. They are now present regularly in healthcare informatics and education. These 2-dimensional square bar codes, originally designed by the Toyota car company, are free of license and have a published international standard. The codes can be generated by free online software and the resulting images incorporated into presentations. The images can be scanned by "smart" phones and tablets using either the iOS or Android platforms, which link the device with the information represented by the QR code (uniform resource locator or URL, online video, text, v-calendar entries, short message service [SMS] and formatted text). Once linked to the device, the information can be viewed at any time after the original presentation, saved in the device or to a Web-based "cloud" repository, printed, or shared with others via email or Bluetooth file transfer. This paper describes how we use QR codes in our tumor board presentations, discusses the benefits, the different QR codes from Web links and how QR codes facilitate the distribution of educational content.

PCB Fault Detection Using Image Processing

NASA Astrophysics Data System (ADS)

Nayak, Jithendra P. R.; Anitha, K.; Parameshachari, B. D., Dr.; Banu, Reshma, Dr.; Rashmi, P.

2017-08-01

The importance of the Printed Circuit Board inspection process has been magnified by requirements of the modern manufacturing environment where delivery of 100% defect free PCBs is the expectation. To meet such expectations, identifying various defects and their types becomes the first step. In this PCB inspection system the inspection algorithm mainly focuses on the defect detection using the natural images. Many practical issues like tilt of the images, bad light conditions, height at which images are taken etc. are to be considered to ensure good quality of the image which can then be used for defect detection. Printed circuit board (PCB) fabrication is a multidisciplinary process, and etching is the most critical part in the PCB manufacturing process. The main objective of Etching process is to remove the exposed unwanted copper other than the required circuit pattern. In order to minimize scrap caused by the wrongly etched PCB panel, inspection has to be done in early stage. However, all of the inspections are done after the etching process where any defective PCB found is no longer useful and is simply thrown away. Since etching process costs 0% of the entire PCB fabrication, it is uneconomical to simply discard the defective PCBs. In this paper a method to identify the defects in natural PCB images and associated practical issues are addressed using Software tools and some of the major types of single layer PCB defects are Pattern Cut, Pin hole, Pattern Short, Nick etc., Therefore the defects should be identified before the etching process so that the PCB would be reprocessed. In the present approach expected to improve the efficiency of the system in detecting the defects even in low quality images

10 CFR 170.31 - Schedule of fees for materials licenses and other regulatory services, including inspections, and...

Code of Federal Regulations, 2011 CFR

2011-01-01

..., including x-ray fluorescence analyzers.4 Application [Program Code(s): 22140] $1,200 D. All other special... extraction of metals other than uranium or thorium, including licenses authorizing the possession of...

Wireless Self-powered Visual and NDE Robotic Inspection System for Live Gas Distribution Mains

DOE Office of Scientific and Technical Information (OSTI.GOV)

Susan Burkett; Hagen Schempf

2006-01-31

Carnegie Mellon University (CMU) under contract from Department of Energy/National Energy Technology Laboratory (DoE/NETL) and co-funding from the Northeast Gas Association (NGA), has completed the overall system design of the next-generation Explorer-II (X-II) live gas main NDE and visual inspection robot platform. The design is based on the Explorer-I prototype which was built and field-tested under a prior (also DoE- and NGA co-funded) program, and served as the validation that self-powered robots under wireless control could access and navigate live natural gas distribution mains. The X-II system design ({approx}8 ft. and 66 lbs.) was heavily based on the X-I design,more » yet was substantially expanded to allow the addition of NDE sensor systems (while retaining its visual inspection capability), making it a modular system, and expanding its ability to operate at pressures up to 750 psig (high-pressure and unpiggable steel-pipe distribution mains). A new electronics architecture and on-board software kernel were added to again improve system performance. A locating sonde system was integrated to allow for absolute position-referencing during inspection (coupled with external differential GPS) and emergency-locating. The power system was upgraded to utilize lithium-based battery-cells for an increase in mission-time. The system architecture now relies on a dual set of end camera-modules to house the 32-bit processors (Single-Board Computer or SBC) as well as the imaging and wireless (off-board) and CAN-based (on-board) communication hardware and software systems (as well as the sonde-coil and -electronics). The drive-module (2 ea.) are still responsible for bracing (and centering) to drive in push/pull fashion the robot train into and through the pipes and obstacles. The steering modules and their arrangement, still allow the robot to configure itself to perform any-angle (up to 90 deg) turns in any orientation (incl. vertical), and enable the live launching and recovery of the system using custom fittings and a (to be developed) launch-chamber/-tube. The battery modules are used to power the system, by providing power to the robot's bus. The support modules perform the functions of centration for the rest of the train as well as odometry pickups using incremental encoding schemes. The electronics architecture is based on a distributed (8-bit) microprocessor architecture (at least 1 in ea. module) communicating to a (one of two) 32-bit SBC, which manages all video-processing, posture and motion control as well as CAN and wireless communications. The operator controls the entire system from an off-board (laptop) controller, which is in constant wireless communication with the robot train in the pipe. The sensor modules collect data and forward it to the robot operator computer (via the CAN-wireless communications chain), who then transfers it to a dedicated NDE data-storage and post-processing computer for further (real-time or off-line) analysis. CMU has fully designed every module in terms of the mechanical, electrical and software elements (architecture only). Substantial effort has gone into pre-prototyping to uncover mechanical, electrical and software issues for critical elements of the design. Design requirements for sensor-providers were also detailed and finalized and provided to them for inclusion in their designs. CMU is expecting to start 2006 with a detailed design effort for both mechanical and electrical components, followed by procurement and fabrication efforts in late winter/spring 2006. The assembly and integration efforts will occupy all of the spring and summer of 2006. Software development will also be a major effort in 2006, and will result in porting and debugging of code on the module- and train-levels in late summer and Fall of 2006. Final pipe mock-up testing is expected in late fall and early winter 2006 with an acceptance demonstration of the robot train (with a sensor-module mock-up) planned to DoE/NGA towards the end of 2006.« less

46 CFR 25.30-10 - Hand-portable fire extinguishers and semi-portable fire-extinguishing systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

....30-10(C): Table 25.30-10(C) Classification Foam, liters (gallons) Carbon dioxide, kilograms (pounds... tampering or use when broken) are not intact, the boarding officer or marine inspector will inspect such...

46 CFR 25.30-10 - Hand-portable fire extinguishers and semi-portable fire-extinguishing systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

....30-10(C): Table 25.30-10(c) Classification Foam, liters (gallons) Carbon dioxide, kilograms (pounds... tampering or use when broken) are not intact, the boarding officer or marine inspector will inspect such...

46 CFR 25.30-10 - Hand-portable fire extinguishers and semi-portable fire-extinguishing systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

....30-10(C): Table 25.30-10(c) Classification Foam, liters (gallons) Carbon dioxide, kilograms (pounds... tampering or use when broken) are not intact, the boarding officer or marine inspector will inspect such...

46 CFR 25.30-10 - Hand-portable fire extinguishers and semi-portable fire-extinguishing systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

....30-10(C): Table 25.30-10(c) Classification Foam,liters (gallons) Carbon dioxide, kilograms (pounds... tampering or use when broken) are not intact, the boarding officer or marine inspector will inspect such...

46 CFR 25.30-10 - Hand-portable fire extinguishers and semi-portable fire-extinguishing systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

....30-10(C): Table 25.30-10(c) Classification Foam,liters (gallons) Carbon dioxide, kilograms (pounds... tampering or use when broken) are not intact, the boarding officer or marine inspector will inspect such...

7 CFR 1409.8 - Public inspection and copying of records; applicable fees.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., electronic recording, transcription of the recording, or minutes of the discussion of any item on the agenda...., Washington, DC 20250. (c) The transcripts, minutes, or transcriptions of electronic recordings of a Board... of transcription or duplication. ...

7 CFR 1409.8 - Public inspection and copying of records; applicable fees.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., electronic recording, transcription of the recording, or minutes of the discussion of any item on the agenda...., Washington, DC 20250. (c) The transcripts, minutes, or transcriptions of electronic recordings of a Board... of transcription or duplication. ...

46 CFR 71.20-15 - Scope of inspections.

Code of Federal Regulations, 2013 CFR

2013-10-01

... appurtenances, piping, main and auxiliary machinery, electrical installations, lifesaving appliances, fire-detecting and extinguishing equipment, pilot boarding equipment, pollution prevention equipment and other... plans, and determine that the vessel is in possession of a valid certificate issued by the Federal...

46 CFR 71.20-15 - Scope of inspections.

Code of Federal Regulations, 2014 CFR

2014-10-01

... appurtenances, piping, main and auxiliary machinery, electrical installations, lifesaving appliances, fire-detecting and extinguishing equipment, pilot boarding equipment, pollution prevention equipment and other... plans, and determine that the vessel is in possession of a valid certificate issued by the Federal...

46 CFR 71.20-15 - Scope of inspections.

Code of Federal Regulations, 2011 CFR

2011-10-01

... appurtenances, piping, main and auxiliary machinery, electrical installations, lifesaving appliances, fire-detecting and extinguishing equipment, pilot boarding equipment, pollution prevention equipment and other... plans, and determine that the vessel is in possession of a valid certificate issued by the Federal...

46 CFR 71.20-15 - Scope of inspections.

Code of Federal Regulations, 2012 CFR

2012-10-01

... appurtenances, piping, main and auxiliary machinery, electrical installations, lifesaving appliances, fire-detecting and extinguishing equipment, pilot boarding equipment, pollution prevention equipment and other... plans, and determine that the vessel is in possession of a valid certificate issued by the Federal...

46 CFR 71.20-15 - Scope of inspections.

Code of Federal Regulations, 2010 CFR

2010-10-01

... appurtenances, piping, main and auxiliary machinery, electrical installations, lifesaving appliances, fire-detecting and extinguishing equipment, pilot boarding equipment, pollution prevention equipment and other... plans, and determine that the vessel is in possession of a valid certificate issued by the Federal...

7 CFR 205.607 - Amending the National List.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Administrative The National List of Allowed and Prohibited Substances § 205.607 Amending the National List. (a) Any person may petition the National Organic Standard Board...

Robotic Inspection System for Non-Destructive Evaluation (nde) of Pipes

NASA Astrophysics Data System (ADS)

Mackenzie, L. D.; Pierce, S. G.; Hayward, G.

2009-03-01

The demand for remote inspection of pipework in the processing cells of nuclear plant provides significant challenges of access, navigation, inspection technique and data communication. Such processing cells typically contain several kilometres of densely packed pipework whose actual physical layout may be poorly documented. Access to these pipes is typically afforded through the radiation shield via a small removable concrete plug which may be several meters from the actual inspection site, thus considerably complicating practical inspection. The current research focuses on the robotic deployment of multiple NDE payloads for weld inspection along non-ferritic steel pipework (thus precluding use of magnetic traction options). A fully wireless robotic inspection platform has been developed that is capable of travelling along the outside of a pipe at any orientation, while avoiding obstacles such as pipe hangers and delivering a variety of NDE payloads. An eddy current array system provides rapid imaging capabilities for surface breaking defects while an on-board camera, in addition to assisting with navigation tasks, also allows real time image processing to identify potential defects. All sensor data can be processed by the embedded microcontroller or transmitted wirelessly back to the point of access for post-processing analysis.

78 FR 8448 - Streamlining Inspection and Warranty Requirements for Federal Housing Administration (FHA) Single...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-06

... jurisdiction did not already perform its own inspections for new construction, and issue building permits and... expected to be minimal. The increased quality of construction materials and the standardization of building... governments that have adopted building codes to regulate and standardize the construction of residential and...

Manual for Public School Facilities: Fire Prevention and Fire Inspection.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Educational Management Services.

This manual is designed for use by New York public school administrators and facility inspectors, providing instruction for completing the state's Fire Safety Report. It provides background information and details about the State Fire Prevention and Building Code and regulations, and explains the inspection and enforcement processes. One-third of…

Ehf Multiple Beam Antennas.

DTIC Science & Technology

1981-09-21

acknowledge and thank A. R. Hislop and D. L. Saul, Code 9262, for their work on tbh mixer design and D. L. Chappelle and K. S. Maynard, Code 8124, for...MTT-28, p 555-563, June 1980 . 33 (a) Mixer matrix, 7 boards, 6-5 mixers, 1-7 mixers. (b) LO power split to boards, 7-way. rN’ o, Ro (c) N-way power...1966. 9. Saleh, A.A.M., Planar Electrically Symmetric N-Way Hybrid Power Dividers/ Combiners, IEEE T-MTT-28, p 555-563, June 1980 . 55

48 CFR 6301.2 - Qualifications of members.

Code of Federal Regulations, 2010 CFR

2010-10-01

... contract law. ... CONTRACT APPEALS BOARD OF CONTRACT APPEALS 6301.2 Qualifications of members. Each member of the Board must... administrative law judges appointed pursuant to section 3105 of title 5 of the United States Code, with the...

CometBoards Users Manual Release 1.0

NASA Technical Reports Server (NTRS)

Guptill, James D.; Coroneos, Rula M.; Patnaik, Surya N.; Hopkins, Dale A.; Berke, Lazlo

1996-01-01

Several nonlinear mathematical programming algorithms for structural design applications are available at present. These include the sequence of unconstrained minimizations technique, the method of feasible directions, and the sequential quadratic programming technique. The optimality criteria technique and the fully utilized design concept are two other structural design methods. A project was undertaken to bring all these design methods under a common computer environment so that a designer can select any one of these tools that may be suitable for his/her application. To facilitate selection of a design algorithm, to validate and check out the computer code, and to ascertain the relative merits of the design tools, modest finite element structural analysis programs based on the concept of stiffness and integrated force methods have been coupled to each design method. The code that contains both these design and analysis tools, by reading input information from analysis and design data files, can cast the design of a structure as a minimum-weight optimization problem. The code can then solve it with a user-specified optimization technique and a user-specified analysis method. This design code is called CometBoards, which is an acronym for Comparative Evaluation Test Bed of Optimization and Analysis Routines for the Design of Structures. This manual describes for the user a step-by-step procedure for setting up the input data files and executing CometBoards to solve a structural design problem. The manual includes the organization of CometBoards; instructions for preparing input data files; the procedure for submitting a problem; illustrative examples; and several demonstration problems. A set of 29 structural design problems have been solved by using all the optimization methods available in CometBoards. A summary of the optimum results obtained for these problems is appended to this users manual. CometBoards, at present, is available for Posix-based Cray and Convex computers, Iris and Sun workstations, and the VM/CMS system.

30 CFR 75.1107-16 - Inspection of fire suppression devices.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Systems” (NFPA No. 11A—1970). National Fire Code No. 13A “Care and Maintenance of Sprinkler Systems” (NFPA No. 13A—1971). National Fire Code No. 15 “Water Spray Fixed Systems for Fire Protection” (NFPA No. 15—1969). National Fire Code No. 17 “Dry Chemical Extinguishing Systems” (NFPA No. 17—1969). National Fire...

30 CFR 75.1107-16 - Inspection of fire suppression devices.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Systems” (NFPA No. 11A—1970). National Fire Code No. 13A “Care and Maintenance of Sprinkler Systems” (NFPA No. 13A—1971). National Fire Code No. 15 “Water Spray Fixed Systems for Fire Protection” (NFPA No. 15—1969). National Fire Code No. 17 “Dry Chemical Extinguishing Systems” (NFPA No. 17—1969). National Fire...

30 CFR 75.1107-16 - Inspection of fire suppression devices.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Systems” (NFPA No. 11A—1970). National Fire Code No. 13A “Care and Maintenance of Sprinkler Systems” (NFPA No. 13A—1971). National Fire Code No. 15 “Water Spray Fixed Systems for Fire Protection” (NFPA No. 15—1969). National Fire Code No. 17 “Dry Chemical Extinguishing Systems” (NFPA No. 17—1969). National Fire...

Reliability of High I/O High Density CCGA Interconnect Electronic Packages under Extreme Thermal Environment

NASA Technical Reports Server (NTRS)

Ramesham, Rajeshuni

2012-01-01

This paper provides the experimental test results of advanced CCGA packages tested in extreme temperature thermal environments. Standard optical inspection and x-ray non-destructive inspection tools were used to assess the reliability of high density CCGA packages for deep space extreme temperature missions. Ceramic column grid array (CCGA) packages have been increasing in use based on their advantages such as high interconnect density, very good thermal and electrical performances, compatibility with standard surface-mount packaging assembly processes, and so on. CCGA packages are used in space applications such as in logic and microprocessor functions, telecommunications, payload electronics, and flight avionics. As these packages tend to have less solder joint strain relief than leaded packages or more strain relief over lead-less chip carrier packages, the reliability of CCGA packages is very important for short-term and long-term deep space missions. We have employed high density CCGA 1152 and 1272 daisy chained electronic packages in this preliminary reliability study. Each package is divided into several daisy-chained sections. The physical dimensions of CCGA1152 package is 35 mm x 35 mm with a 34 x 34 array of columns with a 1 mm pitch. The dimension of the CCGA1272 package is 37.5 mm x 37.5 mm with a 36 x 36 array with a 1 mm pitch. The columns are made up of 80% Pb/20%Sn material. CCGA interconnect electronic package printed wiring polyimide boards have been assembled and inspected using non-destructive x-ray imaging techniques. The assembled CCGA boards were subjected to extreme temperature thermal atmospheric cycling to assess their reliability for future deep space missions. The resistance of daisy-chained interconnect sections were monitored continuously during thermal cycling. This paper provides the experimental test results of advanced CCGA packages tested in extreme temperature thermal environments. Standard optical inspection and x-ray non-destructive inspection tools were used to assess the reliability of high density CCGA packages for deep space extreme temperature missions. Keywords: Extreme temperatures, High density CCGA qualification, CCGA reliability, solder joint failures, optical inspection, and x-ray inspection.

75 FR 150 - Change in Bank Control Notices; Acquisition of Shares of Bank or Bank Holding Companies

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-04

... indicated. The notices also will be available for inspection at the office of the Board of Governors..., Missouri 64198-0001: 1. Charles B. Flaming, individually, and Charles B. Flaming and Sadle Cattle Company...

46 CFR 91.20-15 - Scope of inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... appliances, fire-detecting and extinguishing equipment, pilot boarding equipment, pollution prevention... accordance with approved plans, and determine that the vessel is in possession of a valid certificate issued... applicable regulations in subchapter H (Passenger Vessels) of this chapter. For example, fire-detecting...

46 CFR 91.20-15 - Scope of inspection.

Code of Federal Regulations, 2014 CFR

2014-10-01

... appliances, fire-detecting and extinguishing equipment, pilot boarding equipment, pollution prevention... accordance with approved plans, and determine that the vessel is in possession of a valid certificate issued... applicable regulations in subchapter H (Passenger Vessels) of this chapter. For example, fire-detecting...

46 CFR 91.20-15 - Scope of inspection.

Code of Federal Regulations, 2012 CFR

2012-10-01

... appliances, fire-detecting and extinguishing equipment, pilot boarding equipment, pollution prevention... accordance with approved plans, and determine that the vessel is in possession of a valid certificate issued... applicable regulations in subchapter H (Passenger Vessels) of this chapter. For example, fire-detecting...

46 CFR 91.20-15 - Scope of inspection.

Code of Federal Regulations, 2013 CFR

2013-10-01

... appliances, fire-detecting and extinguishing equipment, pilot boarding equipment, pollution prevention... accordance with approved plans, and determine that the vessel is in possession of a valid certificate issued... applicable regulations in subchapter H (Passenger Vessels) of this chapter. For example, fire-detecting...

46 CFR 91.20-15 - Scope of inspection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... appliances, fire-detecting and extinguishing equipment, pilot boarding equipment, pollution prevention... accordance with approved plans, and determine that the vessel is in possession of a valid certificate issued... applicable regulations in subchapter H (Passenger Vessels) of this chapter. For example, fire-detecting...

46 CFR 105.05-10 - Intent of regulations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS... vessels which are otherwise exempt from requirements of vessel inspection, but by reason of occasionally engaging in the service of carrying on board and dispensing liquid inflammable and combustible cargo in...

46 CFR 105.05-10 - Intent of regulations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS... vessels which are otherwise exempt from requirements of vessel inspection, but by reason of occasionally engaging in the service of carrying on board and dispensing liquid inflammable and combustible cargo in...

46 CFR 105.05-10 - Intent of regulations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS... vessels which are otherwise exempt from requirements of vessel inspection, but by reason of occasionally engaging in the service of carrying on board and dispensing liquid inflammable and combustible cargo in...

46 CFR 105.05-10 - Intent of regulations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS... vessels which are otherwise exempt from requirements of vessel inspection, but by reason of occasionally engaging in the service of carrying on board and dispensing liquid inflammable and combustible cargo in...

46 CFR 105.05-10 - Intent of regulations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS... vessels which are otherwise exempt from requirements of vessel inspection, but by reason of occasionally engaging in the service of carrying on board and dispensing liquid inflammable and combustible cargo in...

Integrated testing system FiTest for diagnosis of PCBA

NASA Astrophysics Data System (ADS)

Bogdan, Arkadiusz; Lesniak, Adam

2016-12-01

This article presents the innovative integrated testing system FiTest for automatic, quick inspection of printed circuit board assemblies (PCBA) manufactured in Surface Mount Technology (SMT). Integration of Automatic Optical Inspection (AOI), In-Circuit Tests (ICT) and Functional Circuit Tests (FCT) resulted in universal hardware platform for testing variety of electronic circuits. The platform provides increased test coverage, decreased level of false calls and optimization of test duration. The platform is equipped with powerful algorithms performing tests in a stable and repetitive way and providing effective management of diagnosis.

New design environment for defect detection in web inspection systems

NASA Astrophysics Data System (ADS)

Hajimowlana, S. Hossain; Muscedere, Roberto; Jullien, Graham A.; Roberts, James W.

1997-09-01

One of the aims of industrial machine vision is to develop computer and electronic systems destined to replace human vision in the process of quality control of industrial production. In this paper we discuss the development of a new design environment developed for real-time defect detection using reconfigurable FPGA and DSP processor mounted inside a DALSA programmable CCD camera. The FPGA is directly connected to the video data-stream and outputs data to a low bandwidth output bus. The system is targeted for web inspection but has the potential for broader application areas. We describe and show test results of the prototype system board, mounted inside a DALSA camera and discuss some of the algorithms currently simulated and implemented for web inspection applications.

Assuring Structural Integrity in Army Systems

DTIC Science & Technology

1985-02-28

power plants are* I. American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code , Section III - Rules for Construction of Nuclear...Power Plant Components; 2. ASNE Boiler and Pressure Vessel Code , Section XI, Rules for In-Service Inspection of Nuclear Power Plant Components; and 3

75 FR 61530 - Issuance of Regulatory Guides

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-05

... Materials Code Case Acceptability, ASME Section III,'' and RG 1.147, Rev. 16, ``Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1.'' FOR FURTHER INFORMATION CONTACT: Wallace E. Norris... specific problems or postulated accidents, and data the staff needs in its review of applications for...

Agile deployment and code coverage testing metrics of the boot software on-board Solar Orbiter's Energetic Particle Detector

NASA Astrophysics Data System (ADS)

Parra, Pablo; da Silva, Antonio; Polo, Óscar R.; Sánchez, Sebastián

2018-02-01

In this day and age, successful embedded critical software needs agile and continuous development and testing procedures. This paper presents the overall testing and code coverage metrics obtained during the unit testing procedure carried out to verify the correctness of the boot software that will run in the Instrument Control Unit (ICU) of the Energetic Particle Detector (EPD) on-board Solar Orbiter. The ICU boot software is a critical part of the project so its verification should be addressed at an early development stage, so any test case missed in this process may affect the quality of the overall on-board software. According to the European Cooperation for Space Standardization ESA standards, testing this kind of critical software must cover 100% of the source code statement and decision paths. This leads to the complete testing of fault tolerance and recovery mechanisms that have to resolve every possible memory corruption or communication error brought about by the space environment. The introduced procedure enables fault injection from the beginning of the development process and enables to fulfill the exigent code coverage demands on the boot software.

Violations identified from routine swimming pool inspections--selected states and counties, United States, 2008.

PubMed

2010-05-21

Swimming is the third most popular U.S. sport or exercise activity, with approximately 314 million visits to recreational water venues, including treated venues (e.g., pools), each year. The most frequently reported type of recreational water illness (RWI) outbreak is gastroenteritis, the incidence of which is increasing. During 1997--2006, chlorine- and bromine-susceptible pathogens (e.g., Shigella and norovirus) caused 24 (23%) of 104 treated venue--associated RWI outbreaks of gastroenteritis, indicating lapses in proper operation of pools. Pool inspectors help minimize the risk for RWIs and injuries by enforcing regulations that govern public treated recreational water venues. To assess pool code compliance, CDC analyzed 2008 data from 121,020 routine pool inspections conducted by a convenience sample of 15 state and local agencies. Because pool codes and, therefore, inspection items differed across jurisdictions, reported denominators varied. Of 111,487 inspections, 13,532 (12.1%) resulted in immediate closure because of serious violations (e.g., lack of disinfectant in the water). Of 120,975 inspections, 12,917 (10.7%) identified disinfectant level violations. Although these results likely are not representative of all pools in the United States, they suggest the need for increased public health scrutiny and improved pool operation. The results also demonstrate that pool inspection data can be used as a potential source for surveillance to guide resource allocation and regulatory decision-making. Collecting pool inspection data in a standardized, electronic format can facilitate routine analysis to support efforts to reduce health and safety risks for swimmers.

48 CFR 1901.104-1 - Publication and code arrangement.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Publication and code arrangement. 1901.104-1 Section 1901.104-1 Federal Acquisition Regulations System BROADCASTING BOARD OF..., Issuance 1901.104-1 Publication and code arrangement. (a) The IAAR is published in the Federal Register and...

49 CFR 1248.100 - Commodity classification designated.

Code of Federal Regulations, 2010 CFR

2010-10-01

... STATISTICS Commodity Code § 1248.100 Commodity classification designated. Commencing with reports for the..., reports of commodity statistics required to be made to the Board, shall be based on the commodity codes... Statistics, 1963, issued by the Bureau of the Budget, and on additional codes 411 through 462 shown in § 1248...

46 CFR 199.30 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... surveys, atmospheric research, and biological research. Officer in Charge, Marine Inspection (OCMI), means... other similar places open to persons on board. Anti-exposure suit means a protective suit designed for... means the method or devices designed to transfer a survival craft or rescue boat from its stowed...

46 CFR 199.30 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... surveys, atmospheric research, and biological research. Officer in Charge, Marine Inspection (OCMI), means... other similar places open to persons on board. Anti-exposure suit means a protective suit designed for... means the method or devices designed to transfer a survival craft or rescue boat from its stowed...

46 CFR 199.30 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... surveys, atmospheric research, and biological research. Officer in Charge, Marine Inspection (OCMI), means... other similar places open to persons on board. Anti-exposure suit means a protective suit designed for... means the method or devices designed to transfer a survival craft or rescue boat from its stowed...

46 CFR 131.590 - Firefighting equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... required firefighting equipment is on board in the prescribed location and always ready for use, other than... performance of the tests and inspections of each portable fire extinguisher, semiportable fire extinguisher, and fixed fire-extinguishing system aboard described by Table 132.350 of this subchapter. (c) The...

46 CFR 131.590 - Firefighting equipment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... required firefighting equipment is on board in the prescribed location and always ready for use, other than... performance of the tests and inspections of each portable fire extinguisher, semiportable fire extinguisher, and fixed fire-extinguishing system aboard described by Table 132.350 of this subchapter. (c) The...

46 CFR 131.590 - Firefighting equipment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... required firefighting equipment is on board in the prescribed location and always ready for use, other than... performance of the tests and inspections of each portable fire extinguisher, semiportable fire extinguisher, and fixed fire-extinguishing system aboard described by Table 132.350 of this subchapter. (c) The...

46 CFR 131.590 - Firefighting equipment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... required firefighting equipment is on board in the prescribed location and always ready for use, other than... performance of the tests and inspections of each portable fire extinguisher, semiportable fire extinguisher, and fixed fire-extinguishing system aboard described by Table 132.350 of this subchapter. (c) The...

Quantitative Inspection Technologies for Aging Military Aircraft

DTIC Science & Technology

2013-11-01

Continue exploring the application of THz/FTIR for advanced aerospace materials, e.g., Thermal Barrier Coatings (TBCs) and Ceramic Matrix Composites...With On-Board Impedance- Matching Buffers ...Specimen. The Inverted Foil Conductivity Of 1.348%IACS Agrees With The DCPD Value Of 1.342%IACS

12 CFR 604.425 - Announcement of meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

....425 Banks and Banking FARM CREDIT ADMINISTRATION ADMINISTRATIVE PROVISIONS FARM CREDIT ADMINISTRATION... Administration, McLean, Virginia 22102-5090, on the second Thursday of each month, unless the Board fixes a...)(1) The Farm Credit Administration shall make available for public inspection the time, place, and...

7 CFR 201.24 - Code designation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 3 2011-01-01 2011-01-01 false Code designation. 201.24 Section 201.24 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Agricultural Seeds § 20...

7 CFR 201.28 - Code designation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Code designation. 201.28 Section 201.28 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Vegetable Seeds § 201.2...

7 CFR 201.28 - Code designation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Code designation. 201.28 Section 201.28 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Vegetable Seeds § 201.2...

7 CFR 201.28 - Code designation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Code designation. 201.28 Section 201.28 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Vegetable Seeds § 201.2...

7 CFR 201.24 - Code designation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Code designation. 201.24 Section 201.24 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Agricultural Seeds § 20...

7 CFR 201.24 - Code designation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Code designation. 201.24 Section 201.24 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Agricultural Seeds § 20...

7 CFR 201.24 - Code designation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Code designation. 201.24 Section 201.24 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Agricultural Seeds § 20...

7 CFR 201.28 - Code designation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 3 2011-01-01 2011-01-01 false Code designation. 201.28 Section 201.28 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Vegetable Seeds § 201.2...

7 CFR 201.24 - Code designation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Code designation. 201.24 Section 201.24 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Agricultural Seeds § 20...

7 CFR 201.28 - Code designation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Code designation. 201.28 Section 201.28 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Vegetable Seeds § 201.2...

Fatigue Behavior of HY-130 Steel Weldments Containing Fabrication Discontinuities.

DTIC Science & Technology

1985-04-18

discontinuities to solutions for elliptical discontinuities. One such approach has been formalized in the ASME Section XI Boiler and Pressure Vessel Code [1... Boiler and Pressure Vessel Code , Section XI, "Rules for Inservice Inspection of Nuclear Reactor Coolant Systems," American Society of Mechanical

40 CFR 94.5 - Reference materials.

Code of Federal Regulations, 2012 CFR

2012-07-01

... available for inspection at the National Archives and Records Administration (NARA). For information on the.../code_of_federal_regulations/ibr_locations.html. In addition, these materials are available from the...-7611, or at http://www.imo.org. (1) Resolution 2—Technical Code on Control of Emission of Nitrogen...

40 CFR 94.5 - Reference materials.

Code of Federal Regulations, 2014 CFR

2014-07-01

... available for inspection at the National Archives and Records Administration (NARA). For information on the.../code_of_federal_regulations/ibr_locations.html. In addition, these materials are available from the...-7611, or at http://www.imo.org. (1) Resolution 2—Technical Code on Control of Emission of Nitrogen...

40 CFR 94.5 - Reference materials.

Code of Federal Regulations, 2013 CFR

2013-07-01

... available for inspection at the National Archives and Records Administration (NARA). For information on the.../code_of_federal_regulations/ibr_locations.html. In addition, these materials are available from the...-7611, or at http://www.imo.org. (1) Resolution 2—Technical Code on Control of Emission of Nitrogen...

76 FR 44977 - Shipping Coordinating Committee; Notice of Committee Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-27

... packing of cargo transport units. --Consideration for the efficacy of Container Inspection Programme... Dangerous Goods, Solid Cargoes and Containers (DSC 16) to be held at IMO Headquarters, London, United... Solid Bulk Cargoes Code (IMSBC Code) including evaluation of properties of solid bulk cargos. --Casualty...

KENNEDY SPACE CENTER, FLA. - The Stafford-Covey Return to Flight Task Group (SCTG) inspects debris in the Columbia Debris Hangar. At right is the model of the left wing that has been used during recovery operations. Chairing the task group are Richard O. Covey, former Space Shuttle commander, and Thomas P. Stafford (third from right, foreground), Apollo commander. Chartered by NASA Administrator Sean O’Keefe, the task group will perform an independent assessment of NASA’s implementation of the final recommendations by the Columbia Accident Investigation Board.

NASA Image and Video Library

2003-08-05

KENNEDY SPACE CENTER, FLA. - The Stafford-Covey Return to Flight Task Group (SCTG) inspects debris in the Columbia Debris Hangar. At right is the model of the left wing that has been used during recovery operations. Chairing the task group are Richard O. Covey, former Space Shuttle commander, and Thomas P. Stafford (third from right, foreground), Apollo commander. Chartered by NASA Administrator Sean O’Keefe, the task group will perform an independent assessment of NASA’s implementation of the final recommendations by the Columbia Accident Investigation Board.

Structural Integrity of Water Reactor Pressure Boundary Components.

DTIC Science & Technology

1980-08-01

Boiler and Pressure Vessel Code , Sec. Ill). Estimates of the upper shelf K level from small-specimen...from Appendix A of Section XI of the ASME Boiler and Pressure Vessel Code [11. Figure 9 shows this same data set, together with earlier data for...0969, NRL Memo- randum Report 4063, Sep. 1979. 11. Section XI - ASME Boiler and Pressure Vessel Code , Rules for Inservice Inspection of Nuclear

The 1987-88 Accountable Costs Study: A Report to the Governor, the Lieutenant Governor, and Members of the Seventy-First Legislature from the State Board of Education.

ERIC Educational Resources Information Center

Texas State Board of Education, Austin.

The State Board of Education is required by the Texas Education Code Section 16.201 to make recommendations to the legislature concerning the cost of education. This report is a summation of the State Board of Education findings. After more than a year of study, the board has determined the minimum basic program costs to be $2,197 per student in…

Quality control process improvement of flexible printed circuit board by FMEA

NASA Astrophysics Data System (ADS)

Krasaephol, Siwaporn; Chutima, Parames

2018-02-01

This research focuses on the quality control process improvement of Flexible Printed Circuit Board (FPCB), centred around model 7-Flex, by using Failure Mode and Effect Analysis (FMEA) method to decrease proportion of defective finished goods that are found at the final inspection process. Due to a number of defective units that were found at the final inspection process, high scraps may be escaped to customers. The problem comes from poor quality control process which is not efficient enough to filter defective products from in-process because there is no In-Process Quality Control (IPQC) or sampling inspection in the process. Therefore, the quality control process has to be improved by setting inspection gates and IPCQs at critical processes in order to filter the defective products. The critical processes are analysed by the FMEA method. IPQC is used for detecting defective products and reducing chances of defective finished goods escaped to the customers. Reducing proportion of defective finished goods also decreases scrap cost because finished goods incur higher scrap cost than work in-process. Moreover, defective products that are found during process can reflect the abnormal processes; therefore, engineers and operators should timely solve the problems. Improved quality control was implemented for 7-Flex production lines from July 2017 to September 2017. The result shows decreasing of the average proportion of defective finished goods and the average of Customer Manufacturers Lot Reject Rate (%LRR of CMs) equal to 4.5% and 4.1% respectively. Furthermore, cost saving of this quality control process equals to 100K Baht.

Evaluation of Nondestructive Underwater Timber Inspection Techniques

DTIC Science & Technology

1984-08-01

possible to codice their presnce. Figure 1. Characteristics of marine borers. 3 Table 1. Accuracy Requirements for Timber Piles [Nomenclature at end of...Athens GA NAVSEASYSCOM Code OOC-D. Washington. DC: Codk PMS 395 A 3. Washington. DC; Code PMS 395 A2. Wasi~ington. DC; Codic PMS 396.3311 (Rekas), Wash

Detection of microbial biofilms on food processing surfaces: hyperspectral fluorescence imaging study

NASA Astrophysics Data System (ADS)

Jun, Won; Kim, Moon S.; Chao, Kaunglin; Lefcourt, Alan M.; Roberts, Michael S.; McNaughton, James L.

2009-05-01

We used a portable hyperspectral fluorescence imaging system to evaluate biofilm formations on four types of food processing surface materials including stainless steel, polypropylene used for cutting boards, and household counter top materials such as formica and granite. The objective of this investigation was to determine a minimal number of spectral bands suitable to differentiate microbial biofilm formation from the four background materials typically used during food processing. Ultimately, the resultant spectral information will be used in development of handheld portable imaging devices that can be used as visual aid tools for sanitation and safety inspection (microbial contamination) of the food processing surfaces. Pathogenic E. coli O157:H7 and Salmonella cells were grown in low strength M9 minimal medium on various surfaces at 22 +/- 2 °C for 2 days for biofilm formation. Biofilm autofluorescence under UV excitation (320 to 400 nm) obtained by hyperspectral fluorescence imaging system showed broad emissions in the blue-green regions of the spectrum with emission maxima at approximately 480 nm for both E. coli O157:H7 and Salmonella biofilms. Fluorescence images at 480 nm revealed that for background materials with near-uniform fluorescence responses such as stainless steel and formica cutting board, regardless of the background intensity, biofilm formation can be distinguished. This suggested that a broad spectral band in the blue-green regions can be used for handheld imaging devices for sanitation inspection of stainless, cutting board, and formica surfaces. The non-uniform fluorescence responses of granite make distinctions between biofilm and background difficult. To further investigate potential detection of the biofilm formations on granite surfaces with multispectral approaches, principal component analysis (PCA) was performed using the hyperspectral fluorescence image data. The resultant PCA score images revealed distinct contrast between biofilms and granite surfaces. This investigation demonstrated that biofilm formations on food processing surfaces, even for background materials with heterogeneous fluorescence responses, can be detected. Furthermore, a multispectral approach in developing handheld inspection devices may be needed to inspect surface materials that exhibit non-uniform fluorescence.

46 CFR 147.1 - Purpose and applicability.

Code of Federal Regulations, 2010 CFR

2010-10-01

... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) DANGEROUS CARGOES HAZARDOUS SHIPS' STORES... what hazardous materials may be on board vessels as ships' stores and prescribes requirements for the.... 3301 as subject to inspection under part B of 46 U.S.C. Subtitle II. On foreign vessels in the...

[Nondestructive Evaluation (NDE) Capabilities

NASA Technical Reports Server (NTRS)

Born, Martin

2010-01-01

These poster boards display the United Space Alliance's (USA) systems and equipment used for Nondestructive Evaluation. These include: (1) the Robotic Inspection Facility, (2) CAT-Scan and Laminography, (3) Laser Surface Profilometry, (4) Remote Eddy Current, (5) Ultrasonic Phased Array, (7) Infrared Flash Thermography, and (8) Backscatter X-Ray (BSX)

46 CFR 232.4 - Balance sheet accounts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... categories may include design and inspection costs; and for ODS categories may include wages, maintenance and... Financial Accounting Standards Board. (9) 330Property and Equipment. (i) This account shall include the cost... and all other associated cost necessary to place the respective property and equipment in acceptable...

46 CFR 232.4 - Balance sheet accounts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... categories may include design and inspection costs; and for ODS categories may include wages, maintenance and... Financial Accounting Standards Board. (9) 330Property and Equipment. (i) This account shall include the cost... and all other associated cost necessary to place the respective property and equipment in acceptable...

46 CFR 232.4 - Balance sheet accounts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... categories may include design and inspection costs; and for ODS categories may include wages, maintenance and... Financial Accounting Standards Board. (9) 330Property and Equipment. (i) This account shall include the cost... and all other associated cost necessary to place the respective property and equipment in acceptable...

76 FR 81465 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-28

... law governing the protection of animal health. The law gives the Secretary of Agriculture board... 1995, Public Law 104-13. Comments regarding (a) Whether the collection of information is necessary for... number. Animal and Plant Health Inspection Service Title: Bovine Brucellosis Class Free State and...

National Program for Inspection of Non-Federal Dams. Williams Pond Dam (CT 00551), Thames River Basin, Lebanon, Connecticut. Phase I Inspection Program.

DTIC Science & Technology

1978-10-01

GRA&I UnTucea B WILLIAMS POND DAM ~~1Z~ CT 00551 _ Distribution/ Availabilit Y Codes Avail and/or Dis~tj pecialS RIVER BASIN ~lIILEBANON, COXNNECTICUT...Inspection Report. Alternatives to these recommendations r 1 would include reducing the Williams Pond water levels during expected periods of intense storm...Materials Branch Engi’neering Division FRED J. VNS. Jr., Member Chief, De ’ggn Branch Engineering Division SAUL COOPER, -r Chief, Water Control Branch

National Program for Inspection of Non-Federal Dams, Black Brook Dam (MA 01057), Connecticut River Basin, Blandford, Massachusetts. Phase I Inspection Report.

DTIC Science & Technology

1980-03-01

conducting the annual inspection. Frank LaBombard Supt. of Water Department, Town of Russell * William Mikuski Chairman, Board of Selectmen - Russell Kevin ...m , -A a.. 5 5’ L’ Or 51.6 6 Or b.. 7 . . .. h . ;w WThs Waer Isnel at hole (1QW1,q fte. 95- Lop of bedrok. F1.. U..2 0. 2. - 01-16 LiT. 1.2.07 3f366...1 Ofto avt l.A. IWI’ * j. )u.nw 3im T 0 oft" !. . - 4- 1* 0 Poo 0..’ is.,.ft 2. 15-23 O AHWT s 1.. waer ei at. 1 belo I.: 7 31... lo00t. 6. 43-47*10

Preparing Protocols for Institutional Review Boards.

ERIC Educational Resources Information Center

Lyons, Charles M.

1983-01-01

Introduces the process by which Institutional Review Boards (IRBs) review proposals for research involving human subjects. Describes the composition of IRBs. Presents the Nuremberg code, the elements of informed consent, the judging criteria for proposals, and a sample protocol format. References newly published regulations governing research with…

Communications and Information: Compendium of Communications and Information Terminology

DTIC Science & Technology

2002-02-01

Basic Access Module BASIC— Beginners All-Purpose Symbolic Instruction Code BBP—Baseband Processor BBS—Bulletin Board Service (System) BBTC—Broadband...media, formats and labels, programming language, computer documentation, flowcharts and terminology, character codes, data communications and input

76 FR 7782 - Defense Federal Acquisition Regulation Supplement; Rules of the Armed Services Board of Contract...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

...--Depositions Rule 15 Interrogatories to Parties, Admission of Facts, and Production and Inspection of Documents.... Affidavits, depositions, admissions, answers to interrogatories, and stipulations may be employed to... items, if any: pleadings, prehearing conference memoranda or orders, prehearing briefs, depositions or...

12 CFR 261.11 - Records available for public inspection and copying.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Governors of the Federal Reserve System, 20th Street and Constitution Avenue, N.W., Washington, D.C. 20551... copying. 261.11 Section 261.11 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) RULES REGARDING AVAILABILITY OF INFORMATION Published...

40 CFR 52.241 - Interim approval of enhanced inspection and maintenance program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS California... Act (Pub. L. 104-59), the California SIP is approved as meeting the provisions of section 182(c)(3.... (a) [Reserved] (b) Approval. On June 5, 2009, the California Air Resources Board submitted a revision...

77 FR 73270 - Airworthiness Directives; Embraer S.A. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-10

... Airworthiness Limitation Section (ALS) of the EMBRAER ERJ 190 Maintenance Review Board Report (MRBR). This new AD requires revising the maintenance program to incorporate modifications in the ALS of the EMBRAER... issuing this AD since failure to inspect these structural components according to the new ALS tasks...

77 FR 7041 - Changes to Implement Inter Partes Review Proceedings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-10

... comments with the public is more easily accomplished. Electronic comments are preferred to be submitted in... public inspection at the Board of Patent Appeals and Interferences, currently located in Madison East..., on, or after the effective date. DATES: The Office solicits comments from the public on this proposed...

19 CFR 162.22 - Seizure of conveyances.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Seizure of conveyances. 162.22 Section 162.22... TREASURY (CONTINUED) INSPECTION, SEARCH, AND SEIZURE Seizures § 162.22 Seizure of conveyances. (a) General applicability. If it shall appear to any officer authorized to board conveyances and make seizures that there...

75 FR 4331 - Seaway Regulations and Rules: Periodic Update, Various Categories

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-27

... section. In section 401.52, ``Limit of Approach to a Bridge'', vessels are required to proceed at a safe... inspection'', vessels will be required to provide a safe and approved means of boarding for inspectors... action significantly affecting the quality of the human environment. Federalism The Corporation has...

46 CFR 78.47-3 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 3 2011-10-01 2011-10-01 false General. 78.47-3 Section 78.47-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Markings for Fire and Emergency... Inspection, that the prescribed markings are unnecessary for the guidance of the persons on board in case of...

46 CFR 78.47-3 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 3 2012-10-01 2012-10-01 false General. 78.47-3 Section 78.47-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Markings for Fire and Emergency... Inspection, that the prescribed markings are unnecessary for the guidance of the persons on board in case of...

46 CFR 78.47-3 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 3 2013-10-01 2013-10-01 false General. 78.47-3 Section 78.47-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Markings for Fire and Emergency... Inspection, that the prescribed markings are unnecessary for the guidance of the persons on board in case of...

46 CFR 78.47-3 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false General. 78.47-3 Section 78.47-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Markings for Fire and Emergency... Inspection, that the prescribed markings are unnecessary for the guidance of the persons on board in case of...

46 CFR 78.47-3 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 3 2014-10-01 2014-10-01 false General. 78.47-3 Section 78.47-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Markings for Fire and Emergency... Inspection, that the prescribed markings are unnecessary for the guidance of the persons on board in case of...

7 CFR 1210.351 - Books and records.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false Books and records. 1210.351 Section 1210.351... PROMOTION PLAN Watermelon Research and Promotion Plan Reports, Books, and Records § 1210.351 Books and... make available for inspection by employees of the Board or Secretary, such books and records as are...

7 CFR 1220.242 - Books and records.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 10 2012-01-01 2012-01-01 false Books and records. 1220.242 Section 1220.242... CONSUMER INFORMATION Soybean Promotion and Research Order Reports, Books, and Records § 1220.242 Books and... subpart shall maintain and make available for inspection by the Board or Secretary such books and records...

7 CFR 1220.242 - Books and records.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false Books and records. 1220.242 Section 1220.242... CONSUMER INFORMATION Soybean Promotion and Research Order Reports, Books, and Records § 1220.242 Books and... subpart shall maintain and make available for inspection by the Board or Secretary such books and records...

7 CFR 1210.351 - Books and records.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 10 2011-01-01 2011-01-01 false Books and records. 1210.351 Section 1210.351... PROMOTION PLAN Watermelon Research and Promotion Plan Reports, Books, and Records § 1210.351 Books and... make available for inspection by employees of the Board or Secretary, such books and records as are...

7 CFR 1210.351 - Books and records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Books and records. 1210.351 Section 1210.351... PROMOTION PLAN Watermelon Research and Promotion Plan Reports, Books, and Records § 1210.351 Books and... make available for inspection by employees of the Board or Secretary, such books and records as are...

7 CFR 1220.242 - Books and records.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 10 2014-01-01 2014-01-01 false Books and records. 1220.242 Section 1220.242... CONSUMER INFORMATION Soybean Promotion and Research Order Reports, Books, and Records § 1220.242 Books and... subpart shall maintain and make available for inspection by the Board or Secretary such books and records...

7 CFR 1220.242 - Books and records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Books and records. 1220.242 Section 1220.242... CONSUMER INFORMATION Soybean Promotion and Research Order Reports, Books, and Records § 1220.242 Books and... subpart shall maintain and make available for inspection by the Board or Secretary such books and records...

7 CFR 1210.351 - Books and records.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 10 2012-01-01 2012-01-01 false Books and records. 1210.351 Section 1210.351... PROMOTION PLAN Watermelon Research and Promotion Plan Reports, Books, and Records § 1210.351 Books and... make available for inspection by employees of the Board or Secretary, such books and records as are...

7 CFR 1220.242 - Books and records.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 10 2011-01-01 2011-01-01 false Books and records. 1220.242 Section 1220.242... CONSUMER INFORMATION Soybean Promotion and Research Order Reports, Books, and Records § 1220.242 Books and... subpart shall maintain and make available for inspection by the Board or Secretary such books and records...

7 CFR 1210.351 - Books and records.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 10 2014-01-01 2014-01-01 false Books and records. 1210.351 Section 1210.351... PROMOTION PLAN Watermelon Research and Promotion Plan Reports, Books, and Records § 1210.351 Books and... make available for inspection by employees of the Board or Secretary, such books and records as are...

33 CFR 401.90 - Boarding for inspections.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., or for the purpose of making copies or extracts, any log book, document or paper; and (2) In carrying... copying equipment in the vessel to make copies of any books, records, electronic data or other documents... practices and procedures that the officer may reasonably require. (d) Vessels shall provide a safe and...

40 CFR 85.2222 - On-board diagnostic test procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... 85.2222 Section 85.2222 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM MOBILE SOURCES Emission Control System Performance... inspected at the EPA Docket No. A-94-21 at EPA's Air Docket (LE-131), Room 1500 M, 1st Floor, Waterside Mall...

Non-Compliance and Follow-Up in Swedish Official and Private Animal Welfare Control of Dairy Cows

PubMed Central

Hultgren, Jan; Röcklinsberg, Helena; Wahlberg, Birgitta

2018-01-01

Simple Summary In many cases, different animal welfare inspections are taking place at an animal farm over time, as the farmer has to comply with both the legislation and with various private standards. In this study, we compared official inspections carried out by CAB (the County Administrative Board, a governmental agency) with private inspections carried out by Arla Foods (a private company) on dairy farms in one Swedish county. For example, we looked at seasonal effects and compared the incidence of different non-compliances. This study shows that long time periods were sometimes allowed for correction, that follow-up systems are diverse, and that there were differences in the inspection result between CAB and Arla due to different focuses during the inspections. Dirty dairy cattle were, however, a common non-compliance found by both CAB and Arla. Tie-stall housing and winter season (Dec–Feb) were risk factors for non-compliance, while the risk was lower for both CAB and Arla to find non-compliances at organic farms compared to conventional farms. We conclude that the presence of both similarities and differences between different control systems underlines the need for transparency, predictability, and clarity of inspections. Abstract Farmers often have to comply with several sets of animal welfare regulations, since private standards have been developed in addition to legislation. Using an epidemiological approach, we analysed protocols from animal welfare inspections carried out in Swedish dairy herds by the County Administrative Board (CAB; official control of legislation) and by the dairy company Arla Foods (private control of Arlagården standard) during 2010–2013 in the county of Västra Götaland. CAB and Arla inspections were not carried out simultaneously. We aimed to identify common non-compliances, quantify risk factors of non-compliance, and investigate if non-compliances were based on animal-, resource-, or management-based requirements, as well as determining the time period allowed for achieving compliance. Non-compliance was found in 58% of CAB cases, and 51% of Arla cases (each case comprising a sequence of one or several inspections). Dirty dairy cattle was one of the most frequent non-compliances in both control systems. However, the differences in control results were large, suggesting a difference in focus between the two systems. Tie-stall housing and winter season (Dec–Feb) were common risk factors for non-compliance, and overall organic farms had a lower predicted number of non-compliances compared to conventional farms. The presence of both similarities and differences between the systems underlines the need for transparency, predictability, and clarity of inspections. PMID:29738491

NAEYC Code of Ethical Conduct. Revised = Codigo de Conducta Etica. Revisada

ERIC Educational Resources Information Center

National Association of Elementary School Principals (NAESP), 2005

2005-01-01

This document presents a code of ethics for early childhood educators that offers guidelines for responsible behavior and sets forth a common basis for resolving ethical dilemmas encountered in early education. It represents the English and Spanish versions of the revised code. Its contents were approved by the NAEYC Governing Board in April 2005…

A Study to Estimate the Effectiveness of Visual Testing Training for Aviation Maintenance Management

NASA Technical Reports Server (NTRS)

Law, Lewis Lyle

2007-01-01

The Air Commerce Act of 1926 set the beginning for standards in aviation maintenance. Even after deregulation in the late l970s, maintenance standards and requirements still have not changed far from their initial criteria. After a potential candidate completes Federal Aviation Administration training prerequisites, they may test for their Airframe and Powerplant (A&P) certificate. Performing maintenance in the aviation industry for a minimum of three years, the technician may then test for their Inspection Authorization (IA). After receiving their Airframe and Powerplant certificate, a technician is said to have a license to perform. At no time within the three years to eligibility for Inspection Authorization are they required to attend higher-level inspection training. What a technician learns in the aviation maintenance industry is handed down from a seasoned technician to the new hire or is developed from lessons learned on the job. Only in Europe has the Joint Aviation Authorities (JAA) required higher-level training for their aviation maintenance technicians in order to control maintenance related accidents (Lu, 2005). Throughout the 1990s both the General Accounting Office (GAO) and the National Transportation Safety Board (NTSB) made public that the FAA is historically understaffed (GAO, 1996). In a safety recommendation the NTSB stated "The Safety Board continues to lack confidence in the FAA's commitment to provide effective quality assurance and safety oversight of the ATC system (NTSB, 1990)." The Federal Aviation Administration (FAA) has been known to be proactive in creating safer skies. With such reports you would suspect the FAA to also be proactive in developing more stringent inspection training for aviation maintenance technicians. The purpose of this study is to estimate the effectiveness of higher-level inspection training, such as Visual Testing (VT) for aviation maintenance technicians, to improve the safety of aircraft and to make recommendations to management with regard to the value of such training.

[Assessment of Coding in German Diagnosis Related Groups System in Otorhinolaryngology].

PubMed

Ellies, Maik; Anders, Berit; Seger, Wolfgang

2018-05-14

Prospective analysis of assessment reports in otorhinolaryngology for the period 01-03-2011 to 31-03-2017 by the Health Advisory Boards in Lower Saxony and Bremen, Germany in relation to coding in the G-DRG-System. The assessment reports were documented using a standardized database system developed on the basis of the electronic data exchange (DTA) by the Health Advisory Board in Lower Saxony. In addition, the documentation of the assessment reports according to the G-DRG system was used for assessment. Furthermore, the assessment of a case was evaluated once again on the basis of the present assessment documents and presented as an example in detail. During the period from 01-03-2011 to 31-03-2017, a total of 27,424 cases of inpatient assessments of DRGs according to the G-DRG system were collected in the field of otorhinolaryngology. In 7,259 cases, the DRG was changed, and in 20,175 cases, the suspicion of a DRG-relevant coding error was not justified in the review; thus, a DRG change rate of 26% of the assessments was identified over the time period investigated. There were different kinds of coding errors. In order to improve the coding quality in otorhinolaryngology, in addition to the special consideration of the presented "hit list" by the otorhinolaryngology departments, there should be more intensive cooperation between hospitals and the Health Advisory Boards of the federal states. © Georg Thieme Verlag KG Stuttgart · New York.

Fully Employing Software Inspections Data

NASA Technical Reports Server (NTRS)

Shull, Forrest; Feldmann, Raimund L.; Seaman, Carolyn; Regardie, Myrna; Godfrey, Sally

2009-01-01

Software inspections provide a proven approach to quality assurance for software products of all kinds, including requirements, design, code, test plans, among others. Common to all inspections is the aim of finding and fixing defects as early as possible, and thereby providing cost savings by minimizing the amount of rework necessary later in the lifecycle. Measurement data, such as the number and type of found defects and the effort spent by the inspection team, provide not only direct feedback about the software product to the project team but are also valuable for process improvement activities. In this paper, we discuss NASA's use of software inspections and the rich set of data that has resulted. In particular, we present results from analysis of inspection data that illustrate the benefits of fully utilizing that data for process improvement at several levels. Examining such data across multiple inspections or projects allows team members to monitor and trigger cross project improvements. Such improvements may focus on the software development processes of the whole organization as well as improvements to the applied inspection process itself.

A new definition for an old entity: improved definition of mitral valve prolapse using three-dimensional echocardiography and color-coded parametric models.

PubMed

Addetia, Karima; Mor-Avi, Victor; Weinert, Lynn; Salgo, Ivan S; Lang, Roberto M

2014-01-01

Differentiating between mitral valve (MV) prolapse (MVP) and MV billowing (MVB) on two-dimensional echocardiography is challenging. The aim of this study was to test the hypothesis that color-coded models of maximal leaflet displacement from the annular plane into the atrium derived from three-dimensional transesophageal echocardiography would allow discrimination between these lesions. Three-dimensional transesophageal echocardiographic imaging of the MV was performed in 50 patients with (n = 38) and without (n = 12) degenerative MV disease. Definitive diagnosis of MVP versus MVB was made using inspection of dynamic three-dimensional renderings and multiple two-dimensional cut planes extracted from three-dimensional data sets. This was used as a reference standard to test an alternative approach, wherein the color-coded parametric models were inspected for integrity of the coaptation line and location of the maximally displaced portion of the leaflet. Diagnostic interpretations of these models by two independent readers were compared with the reference standard. In all cases of MVP, the color-coded models depicted loss of integrity of the coaptation line and maximal leaflet displacement extending to the coaptation line. MVB was depicted by preserved leaflet apposition with maximal displacement away from the coaptation line. Interpretation of the 50 color-coded models by novice readers took 5 to 10 min and resulted in good agreement with the reference technique (κ = 0.81 and κ = 0.73 for the two readers). Three-dimensional color-coded models provide a static display of MV leaflet displacement, allowing differentiation between MVP and MVB, without the need to inspect multiple planes and while taking into account the saddle shape of the mitral annulus. Copyright © 2014 American Society of Echocardiography. Published by Mosby, Inc. All rights reserved.

77 FR 76078 - Regular Board of Directors Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

..., DC 20005. STATUS: Open. CONTACT PERSON FOR MORE INFORMATION: Erica Hall, Assistant Corporate... Regular Board of Directors Meeting Minutes IV. Approval of the Finance, Budget & Program Committee Meeting... Corporate Secretary. [FR Doc. 2012-31163 Filed 12-21-12; 4:15 pm] BILLING CODE 7570-02-P ...

Management Oversight but Not Management

ERIC Educational Resources Information Center

McAdams, Donald R.

2004-01-01

Good board members and effective boards do not micromanage, but they are trustees for the public. They must accept responsibility for establishing and maintaining high ethical standards for themselves and all school district employees. They must ensure that everyone follows the law in letter and spirit. This means ethics codes,…

29 CFR 2570.35 - Information to be included in applications for individual exemptions only.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Retirement Thrift Investment Board involving compliance with provisions of ERISA, provisions of the Code... Thrift Investment Board regarding the substantive issues involved in the investigation, examination... 4975(f)(5); (iv) Whether Form 5330, Return of Excise Taxes Related to Employee Benefit Plans, has been...

The Movement of Teachers within Ontario School Boards

ERIC Educational Resources Information Center

Sibbald, Timothy

2017-01-01

This study examines teacher movement between secondary schools within the same school board using qualitative multiple case study. Interviews were conducted with each participant before moving, shortly after moving, and a period of time after moving schools. The coding of the interviews found evidence corroborating known themes of leadership,…

Requirements for conformal coating and staking of printed wiring boards and electronic assemblies

NASA Technical Reports Server (NTRS)

1985-01-01

In order to maintain the high standards of the NASA conformal coating and staking program, this publication: prescribes NASA's requirements for assuring reliable conformal coating and staking for printed wiring boards and electronic assemblies; describes and incorporates basic considerations necessary to assure reliable conformal coating and staking; establishes the supplier's responsibility to train and certify personnel; provides for supplier documentation of the fabrication and inspection procedures to be used for NASA work, including supplier innovations and changes in technology; and provides visual workmanship standards to aid those responsible for determining quality conformance to the established requirements.

[The evolution of the Italian Code of Medical Deontology: a historical-epistemological perspective].

PubMed

Conti, A A

The Italian Code of Medical Deontology is a set of self-discipline rules prefixed by the medical profession, that are mandatory for the members of the medical registers, who must conform to these rules. The history of the Italian Code of Medical Deontology dates back to the beginning of the twentieth century. In 1903 it appeared in the form of a "Code of Ethics and Deontology" and was prepared by the Board of the Medical Register of Sassari (Sardinia). This Board inserted the principles inspiring the correct practice of the medical profession in an articulated and self-normative system, also foreseeing disciplinary measures. About ten years later, in 1912, the Medical Register of Turin (Piedmont) elaborated a Code which constituted the basis for a subsequent elaboration leading to a Unified Code of Medical Ethics (1924). After World War II the idea prevailed in Italy that the codes of medical deontology should undergo periodical review, updating and dissemination, and the new 1947 text (Turin) was for the first time amply diffused among Italian physicians. The next national code dates back to 1958, and twenty years later a revision was published. In the 1989 Code new topics appeared, including organ transplantation, artificial in vitro insemination and the role of police doctors; these and other issues were later developed in the 1995, 1998 and 2006 versions of the Code. The last available edition of the Italian Code of Medical Deontology is that of May 2014.

Supplementing Public Health Inspection via Social Media

PubMed Central

Schomberg, John P.; Haimson, Oliver L.; Hayes, Gillian R.; Anton-Culver, Hoda

2016-01-01

Foodborne illness is prevented by inspection and surveillance conducted by health departments across America. Appropriate restaurant behavior is enforced and monitored via public health inspections. However, surveillance coverage provided by state and local health departments is insufficient in preventing the rising number of foodborne illness outbreaks. To address this need for improved surveillance coverage we conducted a supplementary form of public health surveillance using social media data: Yelp.com restaurant reviews in the city of San Francisco. Yelp is a social media site where users post reviews and rate restaurants they have personally visited. Presence of keywords related to health code regulations and foodborne illness symptoms, number of restaurant reviews, number of Yelp stars, and restaurant price range were included in a model predicting a restaurant’s likelihood of health code violation measured by the assigned San Francisco public health code rating. For a list of major health code violations see (S1 Table). We built the predictive model using 71,360 Yelp reviews of restaurants in the San Francisco Bay Area. The predictive model was able to predict health code violations in 78% of the restaurants receiving serious citations in our pilot study of 440 restaurants. Training and validation data sets each pulled data from 220 restaurants in San Francisco. Keyword analysis of free text within Yelp not only improved detection of high-risk restaurants, but it also served to identify specific risk factors related to health code violation. To further validate our model we applied the model generated in our pilot study to Yelp data from 1,542 restaurants in San Francisco. The model achieved 91% sensitivity 74% specificity, area under the receiver operator curve of 98%, and positive predictive value of 29% (given a substandard health code rating prevalence of 10%). When our model was applied to restaurant reviews in New York City we achieved 74% sensitivity, 54% specificity, area under the receiver operator curve of 77%, and positive predictive value of 25% (given a prevalence of 12%). Model accuracy improved when reviews ranked highest by Yelp were utilized. Our results indicate that public health surveillance can be improved by using social media data to identify restaurants at high risk for health code violation. Additionally, using highly ranked Yelp reviews improves predictive power and limits the number of reviews needed to generate prediction. Use of this approach as an adjunct to current risk ranking of restaurants prior to inspection may enhance detection of those restaurants participating in high risk practices that may have gone previously undetected. This model represents a step forward in the integration of social media into meaningful public health interventions. PMID:27023681

Supplementing Public Health Inspection via Social Media.

PubMed

Schomberg, John P; Haimson, Oliver L; Hayes, Gillian R; Anton-Culver, Hoda

2016-01-01

Foodborne illness is prevented by inspection and surveillance conducted by health departments across America. Appropriate restaurant behavior is enforced and monitored via public health inspections. However, surveillance coverage provided by state and local health departments is insufficient in preventing the rising number of foodborne illness outbreaks. To address this need for improved surveillance coverage we conducted a supplementary form of public health surveillance using social media data: Yelp.com restaurant reviews in the city of San Francisco. Yelp is a social media site where users post reviews and rate restaurants they have personally visited. Presence of keywords related to health code regulations and foodborne illness symptoms, number of restaurant reviews, number of Yelp stars, and restaurant price range were included in a model predicting a restaurant's likelihood of health code violation measured by the assigned San Francisco public health code rating. For a list of major health code violations see (S1 Table). We built the predictive model using 71,360 Yelp reviews of restaurants in the San Francisco Bay Area. The predictive model was able to predict health code violations in 78% of the restaurants receiving serious citations in our pilot study of 440 restaurants. Training and validation data sets each pulled data from 220 restaurants in San Francisco. Keyword analysis of free text within Yelp not only improved detection of high-risk restaurants, but it also served to identify specific risk factors related to health code violation. To further validate our model we applied the model generated in our pilot study to Yelp data from 1,542 restaurants in San Francisco. The model achieved 91% sensitivity 74% specificity, area under the receiver operator curve of 98%, and positive predictive value of 29% (given a substandard health code rating prevalence of 10%). When our model was applied to restaurant reviews in New York City we achieved 74% sensitivity, 54% specificity, area under the receiver operator curve of 77%, and positive predictive value of 25% (given a prevalence of 12%). Model accuracy improved when reviews ranked highest by Yelp were utilized. Our results indicate that public health surveillance can be improved by using social media data to identify restaurants at high risk for health code violation. Additionally, using highly ranked Yelp reviews improves predictive power and limits the number of reviews needed to generate prediction. Use of this approach as an adjunct to current risk ranking of restaurants prior to inspection may enhance detection of those restaurants participating in high risk practices that may have gone previously undetected. This model represents a step forward in the integration of social media into meaningful public health interventions.

Advances in in situ inspection of automated fiber placement systems

NASA Astrophysics Data System (ADS)

Juarez, Peter D.; Cramer, K. Elliott; Seebo, Jeffrey P.

2016-05-01

Automated Fiber Placement (AFP) systems have been developed to help take advantage of the tailorability of composite structures in aerospace applications. AFP systems allow the repeatable placement of uncured, spool fed, preimpregnated carbon fiber tape (tows) onto substrates in desired thicknesses and orientations. This automated process can incur defects, such as overlapping tow lines, which can severely undermine the structural integrity of the part. Current defect detection and abatement methods are very labor intensive, and still mostly rely on human manual inspection. Proposed is a thermographic in situ inspection technique which monitors tow placement with an on board thermal camera using the preheated substrate as a through transmission heat source. An investigation of the concept is conducted, and preliminary laboratory results are presented. Also included will be a brief overview of other emerging technologies that tackle the same issue.

Before You Bring Back School Dress Codes, Recognize that the Courts Frown upon Attempts to "Restrict" Students' Rights.

ERIC Educational Resources Information Center

Sparks, Richard K.

1983-01-01

Courts will support school boards' dress codes if based on needs rather than opinions. Courts have affirmed that minors have constitutional rights. Hair length, clothing style, and beards may be protected by students' right to freedom of expression. Codes must be carefully written and consistent with schools' legitimate goals. (PB)

Deploying electromagnetic particle-in-cell (EM-PIC) codes on Xeon Phi accelerators boards

NASA Astrophysics Data System (ADS)

Fonseca, Ricardo

2014-10-01

The complexity of the phenomena involved in several relevant plasma physics scenarios, where highly nonlinear and kinetic processes dominate, makes purely theoretical descriptions impossible. Further understanding of these scenarios requires detailed numerical modeling, but fully relativistic particle-in-cell codes such as OSIRIS are computationally intensive. The quest towards Exaflop computer systems has lead to the development of HPC systems based on add-on accelerator cards, such as GPGPUs and more recently the Xeon Phi accelerators that power the current number 1 system in the world. These cards, also referred to as Intel Many Integrated Core Architecture (MIC) offer peak theoretical performances of >1 TFlop/s for general purpose calculations in a single board, and are receiving significant attention as an attractive alternative to CPUs for plasma modeling. In this work we report on our efforts towards the deployment of an EM-PIC code on a Xeon Phi architecture system. We will focus on the parallelization and vectorization strategies followed, and present a detailed performance evaluation of code performance in comparison with the CPU code.

The job of 'ethics committees'.

PubMed

Moore, Andrew; Donnelly, Andrew

2015-11-13

What should authorities establish as the job of ethics committees and review boards? Two answers are: (1) review of proposals for consistency with the duly established and applicable code and (2) review of proposals for ethical acceptability. The present paper argues that these two jobs come apart in principle and in practice. On grounds of practicality, publicity and separation of powers, it argues that the relevant authorities do better to establish code-consistency review and not ethics-consistency review. It also rebuts bad code and independence arguments for the opposite view. It then argues that authorities at present variously specify both code-consistency and ethics-consistency jobs, but most are also unclear on this issue. The paper then argues that they should reform the job of review boards and ethics committees, by clearly establishing code-consistency review and disestablishing ethics-consistency review, and through related reform of the basic orientation, focus, name, and expertise profile of these bodies and their actions. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

77 FR 46437 - Notice of Proposals To Engage in or To Acquire Companies Engaged in Permissible Nonbanking...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-03

... at the Federal Reserve Bank indicated. The notice also will be available for inspection at the..., comments regarding the applications must be received at the Reserve Bank indicated or the offices of the Board of Governors not later than August 17, 2012. [[Page 46438

12 CFR 271.4 - Records available for public inspection and copying.

Code of Federal Regulations, 2012 CFR

2012-01-01

... copying. 271.4 Section 271.4 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) FEDERAL OPEN MARKET.... weekdays, at the Freedom of Information Office of the Board of Governors of the Federal Reserve System, 20th Street and Constitution Avenue, N.W., Washington, D.C. 20551 (the pedestrian entrance is on C...

12 CFR 271.4 - Records available for public inspection and copying.

Code of Federal Regulations, 2010 CFR

2010-01-01

... copying. 271.4 Section 271.4 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) FEDERAL OPEN MARKET.... weekdays, at the Freedom of Information Office of the Board of Governors of the Federal Reserve System, 20th Street and Constitution Avenue, N.W., Washington, D.C. 20551 (the pedestrian entrance is on C...

12 CFR 271.4 - Records available for public inspection and copying.

Code of Federal Regulations, 2014 CFR

2014-01-01

... copying. 271.4 Section 271.4 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) FEDERAL OPEN MARKET.... weekdays, at the Freedom of Information Office of the Board of Governors of the Federal Reserve System, 20th Street and Constitution Avenue, N.W., Washington, D.C. 20551 (the pedestrian entrance is on C...

Higher Education, 1918-1920. Bulletin, 1921, No. 21

ERIC Educational Resources Information Center

Zook, George F.

1921-01-01

Nearly every State in the Union through the State university or the State board of education, has, after inspection, accredited secondary schools located within its borders. A number of them have also published lists of accredited higher institutions. Naturally there is considerable diversity of practice among the several States, and hence, in…

Nondestructive evaluation of oriented strand board exposed to decay fungi.

Treesearch

Barbara L. Illman; Vina W. Yang; Robert J. Ross; William J. Nelson

2002-01-01

Stress wave nondestructive evaluation (NDE) technologies are being used in our laboratory to evaluate the performance properties of engineered wood. These techniques have proven useful in the inspection of timber structures to locate internal voids and decayed or deteriorated areas in large timbers. But no information exists concerning NDE and important properties of...

7 CFR 800.199 - Conflict-of-interest provisions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and (ii) any board of trade, chamber of commerce, grain exchange, or other trade group composed, in... office space or inspection, weighing, transportation, or office equipment that is owned or controlled, in whole or in part, by a grain business or related entity when the use of the space or equipment is...

7 CFR 800.199 - Conflict-of-interest provisions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and (ii) any board of trade, chamber of commerce, grain exchange, or other trade group composed, in... office space or inspection, weighing, transportation, or office equipment that is owned or controlled, in whole or in part, by a grain business or related entity when the use of the space or equipment is...

7 CFR 800.199 - Conflict-of-interest provisions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and (ii) any board of trade, chamber of commerce, grain exchange, or other trade group composed, in... office space or inspection, weighing, transportation, or office equipment that is owned or controlled, in whole or in part, by a grain business or related entity when the use of the space or equipment is...

7 CFR 800.199 - Conflict-of-interest provisions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and (ii) any board of trade, chamber of commerce, grain exchange, or other trade group composed, in... office space or inspection, weighing, transportation, or office equipment that is owned or controlled, in whole or in part, by a grain business or related entity when the use of the space or equipment is...

49 CFR Appendix A to Part 395 - Electronic On-Board Recorder Performance Specifications

Code of Federal Regulations, 2010 CFR

2010-10-01

... one-way transfer of these records through wired and wireless methods to authorized safety officials... facilitate the electronic transfer of records to roadside inspection personnel and compliance review... whenever there is a change in driver duty status, an EOBR diagnostic event (such as power-on/off, self test...

47 CFR 80.405 - Station license.

Code of Federal Regulations, 2011 CFR

2011-10-01

... unspecified locations or the ship or recreational boat does not have an enclosed wheelhouse, it must be kept where it will be readily available for inspection. The licensee of a station on board a ship subject to... control point of each station. If a copy is posted, it must indicate the location of the original. When...

47 CFR 80.405 - Station license.

Code of Federal Regulations, 2012 CFR

2012-10-01

... unspecified locations or the ship or recreational boat does not have an enclosed wheelhouse, it must be kept where it will be readily available for inspection. The licensee of a station on board a ship subject to... control point of each station. If a copy is posted, it must indicate the location of the original. When...

47 CFR 80.405 - Station license.

Code of Federal Regulations, 2010 CFR

2010-10-01

... unspecified locations or the ship or recreational boat does not have an enclosed wheelhouse, it must be kept where it will be readily available for inspection. The licensee of a station on board a ship subject to... control point of each station. If a copy is posted, it must indicate the location of the original. When...

47 CFR 80.405 - Station license.

Code of Federal Regulations, 2013 CFR

2013-10-01

... unspecified locations or the ship or recreational boat does not have an enclosed wheelhouse, it must be kept where it will be readily available for inspection. The licensee of a station on board a ship subject to... control point of each station. If a copy is posted, it must indicate the location of the original. When...

47 CFR 80.405 - Station license.

Code of Federal Regulations, 2014 CFR

2014-10-01

... unspecified locations or the ship or recreational boat does not have an enclosed wheelhouse, it must be kept where it will be readily available for inspection. The licensee of a station on board a ship subject to... control point of each station. If a copy is posted, it must indicate the location of the original. When...

75 FR 10688 - Seaway Regulations and Rules: Periodic Update, Various Categories

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-09

... inspection'', vessels will be required to provide a safe and approved means of boarding for inspectors... significantly affecting the quality of the human environment. Federalism The Corporation has analyzed this rule...)--Working (Canadian Stations in Sector 1 and the Welland Canal). 156.6 MHz--(channel 12)--Working (U.S...

All About OSHA and How It Will Help -- and Unnerve -- Your District

ERIC Educational Resources Information Center

American School Board Journal, 1973

1973-01-01

In response to OSHA, school board members and administrators should initiate a comprehensive, districtwide safety education and accident prevention program. OSHA will affect schools by requiring injury and illness records and onsite inspections. It will affect the operation of the physical plant and effect the provision of a comprehensive,…

78 FR 17136 - Federal Credit Union Ownership of Fixed Assets

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-20

...-3428. Hand DeliveryCourier: Same as mail address. Public Inspection: You may view all public comments... with its usage plan. In the Board's view, ``meaningful'' means a portion large enough that an FCU is... rule may have on a substantial number of small entities (primarily those under fifty million dollars in...

7 CFR 1250.353 - Books and records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Books and records. 1250.353 Section 1250.353... Research and Promotion Order Reports, Books, and Records § 1250.353 Books and records. Each handler subject... inspection by the Board or the Secretary such books and records as are necessary to carry out the provisions...

7 CFR 1160.402 - Books and records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Books and records. 1160.402 Section 1160.402... Order Reports, Books and Records § 1160.402 Books and records. Each person subject to this subpart shall maintain and make available for inspection by agents of the Board and the Secretary such books and records...

7 CFR 1250.353 - Books and records.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false Books and records. 1250.353 Section 1250.353... Research and Promotion Order Reports, Books, and Records § 1250.353 Books and records. Each handler subject... inspection by the Board or the Secretary such books and records as are necessary to carry out the provisions...

7 CFR 1160.402 - Books and records.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Books and records. 1160.402 Section 1160.402... Order Reports, Books and Records § 1160.402 Books and records. Each person subject to this subpart shall maintain and make available for inspection by agents of the Board and the Secretary such books and records...

7 CFR 1250.353 - Books and records.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 10 2011-01-01 2011-01-01 false Books and records. 1250.353 Section 1250.353... Research and Promotion Order Reports, Books, and Records § 1250.353 Books and records. Each handler subject... inspection by the Board or the Secretary such books and records as are necessary to carry out the provisions...

7 CFR 1160.402 - Books and records.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Books and records. 1160.402 Section 1160.402... Order Reports, Books and Records § 1160.402 Books and records. Each person subject to this subpart shall maintain and make available for inspection by agents of the Board and the Secretary such books and records...

7 CFR 1160.402 - Books and records.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Books and records. 1160.402 Section 1160.402... Order Reports, Books and Records § 1160.402 Books and records. Each person subject to this subpart shall maintain and make available for inspection by agents of the Board and the Secretary such books and records...

7 CFR 1160.402 - Books and records.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Books and records. 1160.402 Section 1160.402... Order Reports, Books and Records § 1160.402 Books and records. Each person subject to this subpart shall maintain and make available for inspection by agents of the Board and the Secretary such books and records...

7 CFR 1250.353 - Books and records.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 10 2012-01-01 2012-01-01 false Books and records. 1250.353 Section 1250.353... Research and Promotion Order Reports, Books, and Records § 1250.353 Books and records. Each handler subject... inspection by the Board or the Secretary such books and records as are necessary to carry out the provisions...

7 CFR 1250.353 - Books and records.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 10 2014-01-01 2014-01-01 false Books and records. 1250.353 Section 1250.353... Research and Promotion Order Reports, Books, and Records § 1250.353 Books and records. Each handler subject... inspection by the Board or the Secretary such books and records as are necessary to carry out the provisions...

Fire Pumps: Time to Change NFPA 25 Weekly Churn Testing

ERIC Educational Resources Information Center

Saidi, John F.; Davis, Richard J.

2010-01-01

APPA, through its Code Advocacy Task Force (CATF), is active with code organizations such as the National Fire Protection Association (NFPA). This article reviews some of the recent work on NFPA 25, Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, by the CATF and some members of the NFPA 25 Technical…

[Medical services on an inspection ship in the north Atlantic].

PubMed

Kjaer, A

1990-10-29

The Danish Naval Inspection Ships sail in the North Atlantic waters with a doctor on board. The object of this investigation was to illustrate the medical services on board and to elucidate the significance of various factors to predict seeking medical advice. During a period of three months, all of the medical services and certain basic factors were registered. The crew was interviewed about consumption of alcohol and tobacco, previous life at sea and family background. A total of 305 consultations were used by the crew of 72 men. This figure is five times the anticipated figure in general practice. Low rank and low age were predictors for frequent medical consultations. The diagnosis groups of traumata/injuries, dermatological conditions and disease in the nervous system or organs of sense were relatively overrepresented. A series of factors may possibly have influenced the pattern of seeking medical help so that this differs from general practice. It is concluded that the dangerous working environment and poor possibilities for good hygiene are important factors whereas the mental stress is of lesser significance.

Front-end electronics and DAQ for the EURITRACK tagged neutron inspection system

NASA Astrophysics Data System (ADS)

Lunardon, M.; Bottosso, C.; Fabris, D.; Moretto, S.; Nebbia, G.; Pesente, S.; Viesti, G.; Bigongiari, A.; Colonna, A.; Tintori, C.; Valkovic, V.; Sudac, D.; Peerani, P.; Sequeira, V.; Salvato, M.

2007-08-01

The EURopean Illicit TRAfficing Countermeasures Kit (EURITRACK) Front-End and Data Acquisition System is a compact set of VME boards interfaced with a standard PC. The system is part of a cargo container inspection portal based on the tagged neutrons technique. The front-end processes all detector signals and checks coincidences between any of the 64 pixels of the alpha particle detector and any gamma-ray signals in 22 NaI(Tl) scintillators. The system is capable of handling the data flow at neutron flux up to the portal limiting value of 108 neutrons/second. Some typical applications are presented.

Ethics Review for Qualitative Inquiry: Adopting a Values-Based, Facilitative Approach

ERIC Educational Resources Information Center

Connolly, Kate; Reid, Adela

2007-01-01

In many institutions, the institutional review board/research ethics board (IRB/REB) uses the traditional audit approach that emerged from the biomedical community (e.g., Nuremburg Code, Belmont Report) to review the ethical acceptability of research using humans as participants. This approach is guided by participant protection and risk…

78 FR 63394 - Approval and Promulgation of Implementation Plans; Idaho: State Board Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 52 [EPA-R10-OAR-2013-0548, FRL-9901-76-Region 10] Approval and Promulgation of Implementation Plans; Idaho: State Board Requirements AGENCY: Environmental..., dated June 26, 2013, and Idaho Code Sec. Sec. 59-701 through 705, Ethics in Government Act, and...

77 FR 44555 - Partial Approval and Disapproval of Air Quality Implementation Plans; Arizona; State Board...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-30

.... ARS 49-478(B) establishes the compositional requirements of the county Air Quality Hearing Boards... County Code 17.04.190 (``Composition'') generally mirrors the language or ARS 49-478 but also includes... membership requirement of ARS 49-478 to interests in persons subject to enforcement orders. However, this...

76 FR 36923 - Meeting of the National Toxicology Program (NTP) Board of Scientific Counselors (BSC): Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-23

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Meeting of the National Toxicology Program (NTP) Board of Scientific Counselors (BSC): Notice of Cancellation AGENCY: National Toxicology Program (NTP), National... Toxicology Program. [FR Doc. 2011-15656 Filed 6-22-11; 8:45 am] BILLING CODE 4140-01-P ...

12 CFR 201.110 - Goods held by persons employed by owner.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Board has taken into consideration the changes that have occurred in commercial law and practice since 1933. Modern commercial law, embodied in the Uniform Commercial Code, refers to “perfecting security interests” rather than “securing title” to goods. The Board believes that if, under State law, the issuance...

76 FR 77235 - Subcommittee on Procedures Review, Advisory Board on Radiation and Worker Health (ABRWH...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-12

... Procedures Review, Advisory Board on Radiation and Worker Health (ABRWH), National Institute for Occupational Safety and Health (NIOSH) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub... Code 9933701. Background: The ABRWH was established under the Energy Employees Occupational Illness...

78 FR 62635 - Subcommittee on Procedures Review, Advisory Board on Radiation and Worker Health (ABRWH...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-22

... Procedures Review, Advisory Board on Radiation and Worker Health (ABRWH), National Institute for Occupational Safety and Health (NIOSH) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub... Code 9933701. Background: The ABRWH was established under the Energy Employees Occupational Illness...

Inspecting Engineering Samples

NASA Image and Video Library

2017-12-08

Goddard's Ritsko Wins 2011 SAVE Award The winner of the 2011 SAVE Award is Matthew Ritsko, a Goddard financial manager. His tool lending library would track and enable sharing of expensive space-flight tools and hardware after projects no longer need them. This set of images represents the types of tools used at NASA. To read more go to: www.nasa.gov/topics/people/features/ritsko-save.html Dr. Doug Rabin (Code 671) and PI La Vida Cooper (Code 564) inspect engineering samples of the HAS-2 imager which will be tested and readout using a custom ASIC with a 16-bit ADC (analog to digital converter) and CDS (correlated double sampling) circuit designed by the Code 564 ASIC group as a part of an FY10 IRAD. The purpose of the IRAD was to develop and high resolution digitizer for Heliophysics applications such as imaging. Future goals for the collaboration include characterization testing and eventually a sounding rocket flight of the integrated system. *ASIC= Application Specific Integrated Circuit NASA/GSFC/Chris Gunn

49 CFR 1248.100 - Commodity classification designated.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 9 2011-10-01 2011-10-01 false Commodity classification designated. 1248.100... STATISTICS Commodity Code § 1248.100 Commodity classification designated. Commencing with reports for the..., reports of commodity statistics required to be made to the Board, shall be based on the commodity codes...

An implementation framework for the feedback of individual research results and incidental findings in research.

PubMed

Thorogood, Adrian; Joly, Yann; Knoppers, Bartha Maria; Nilsson, Tommy; Metrakos, Peter; Lazaris, Anthoula; Salman, Ayat

2014-12-23

This article outlines procedures for the feedback of individual research data to participants. This feedback framework was developed in the context of a personalized medicine research project in Canada. Researchers in this domain have an ethical obligation to return individual research results and/or material incidental findings that are clinically significant, valid and actionable to participants. Communication of individual research data must proceed in an ethical and efficient manner. Feedback involves three procedural steps: assessing the health relevance of a finding, re-identifying the affected participant, and communicating the finding. Re-identification requires researchers to break the code in place to protect participant identities. Coding systems replace personal identifiers with a numerical code. Double coding systems provide added privacy protection by separating research data from personal identifying data with a third "linkage" database. A trusted and independent intermediary, the "keyholder", controls access to this linkage database. Procedural guidelines for the return of individual research results and incidental findings are lacking. This article outlines a procedural framework for the three steps of feedback: assessment, re-identification, and communication. This framework clarifies the roles of the researcher, Research Ethics Board, and keyholder in the process. The framework also addresses challenges posed by coding systems. Breaking the code involves privacy risks and should only be carried out in clearly defined circumstances. Where a double coding system is used, the keyholder plays an important role in balancing the benefits of individual feedback with the privacy risks of re-identification. Feedback policies should explicitly outline procedures for the assessment of findings, and the re-identification and contact of participants. The responsibilities of researchers, the Research Ethics Board, and the keyholder must be clearly defined. We provide general guidelines for keyholders involved in feedback. We also recommend that Research Ethics Boards should not be directly involved in the assessment of individual findings. Hospitals should instead establish formal, interdisciplinary clinical advisory committees to help researchers determine whether or not an uncertain finding should be returned.

Simulation Studies for Inspection of the Benchmark Test with PATRASH

NASA Astrophysics Data System (ADS)

Shimosaki, Y.; Igarashi, S.; Machida, S.; Shirakata, M.; Takayama, K.; Noda, F.; Shigaki, K.

2002-12-01

In order to delineate the halo-formation mechanisms in a typical FODO lattice, a 2-D simulation code PATRASH (PArticle TRAcking in a Synchrotron for Halo analysis) has been developed. The electric field originating from the space charge is calculated by the Hybrid Tree code method. Benchmark tests utilizing three simulation codes of ACCSIM, PATRASH and SIMPSONS were carried out. These results have been confirmed to be fairly in agreement with each other. The details of PATRASH simulation are discussed with some examples.

NASA Tech Briefs, August 2005

NASA Technical Reports Server (NTRS)

2005-01-01

Topics include: Hidden Identification on Parts: Magnetic Machine-Readable Matrix Symbols; System for Processing Coded OFDM Under Doppler and Fading; Multipurpose Hyperspectral Imaging System; Magnetic-Flux-Compensated Voltage Divider; High-Performance Satellite/Terrestrial-Network Gateway; Internet-Based System for Voice Communication With the ISS; Stripline/Microstrip Transition in Multilayer Circuit Board; Dual-Band Feed for a Microwave Reflector Antenna; Quadratic Programming for Allocating Control Effort; Range Process Simulation Tool; Simulator of Space Communication Networks; Computing Q-D Relationships for Storage of Rocket Fuels; Contour Error Map Algorithm; Portfolio Analysis Tool; Glass Frit Filters for Collecting Metal Oxide Nanoparticles; Anhydrous Proton-Conducting Membranes for Fuel Cells; Portable Electron-Beam Free-Form Fabrication System; Miniature Laboratory for Detecting Sparse Biomolecules; Multicompartment Liquid-Cooling/Warming Protective Garments; Laser Metrology for an Optical-Path-Length Modulator; PCM Passive Cooling System Containing Active Subsystems; Automated Electrostatics Environmental Chamber; Estimating Aeroheating of a 3D Body Using a 2D Flow Solver; Artificial Immune System for Recognizing Patterns; Computing the Thermodynamic State of a Cryogenic Fluid; Safety and Mission Assurance Performance Metric; Magnetic Control of Concentration Gradient in Microgravity; Avionics for a Small Robotic Inspection Spacecraft; and Simulation of Dynamics of a Flexible Miniature Airplane.

JSC Wireless Sensor Network Update

NASA Technical Reports Server (NTRS)

Wagner, Robert

2010-01-01

Sensor nodes composed of three basic components... radio module: COTS radio module implementing standardized WSN protocol; treated as WSN modem by main board main board: contains application processor (TI MSP430 microcontroller), memory, power supply; responsible for sensor data acquisition, pre-processing, and task scheduling; re-used in every application with growing library of embedded C code sensor card: contains application-specific sensors, data conditioning hardware, and any advanced hardware not built into main board (DSPs, faster A/D, etc.); requires (re-) development for each application.

A code inspection process for security reviews

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garzoglio, Gabriele; /Fermilab

2009-05-01

In recent years, it has become more and more evident that software threat communities are taking an increasing interest in Grid infrastructures. To mitigate the security risk associated with the increased numbers of attacks, the Grid software development community needs to scale up effort to reduce software vulnerabilities. This can be achieved by introducing security review processes as a standard project management practice. The Grid Facilities Department of the Fermilab Computing Division has developed a code inspection process, tailored to reviewing security properties of software. The goal of the process is to identify technical risks associated with an application andmore » their impact. This is achieved by focusing on the business needs of the application (what it does and protects), on understanding threats and exploit communities (what an exploiter gains), and on uncovering potential vulnerabilities (what defects can be exploited). The desired outcome of the process is an improvement of the quality of the software artifact and an enhanced understanding of possible mitigation strategies for residual risks. This paper describes the inspection process and lessons learned on applying it to Grid middleware.« less

A code inspection process for security reviews

NASA Astrophysics Data System (ADS)

Garzoglio, Gabriele

2010-04-01

In recent years, it has become more and more evident that software threat communities are taking an increasing interest in Grid infrastructures. To mitigate the security risk associated with the increased numbers of attacks, the Grid software development community needs to scale up effort to reduce software vulnerabilities. This can be achieved by introducing security review processes as a standard project management practice. The Grid Facilities Department of the Fermilab Computing Division has developed a code inspection process, tailored to reviewing security properties of software. The goal of the process is to identify technical risks associated with an application and their impact. This is achieved by focusing on the business needs of the application (what it does and protects), on understanding threats and exploit communities (what an exploiter gains), and on uncovering potential vulnerabilities (what defects can be exploited). The desired outcome of the process is an improvement of the quality of the software artifact and an enhanced understanding of possible mitigation strategies for residual risks. This paper describes the inspection process and lessons learned on applying it to Grid middleware.

Design of an Orbital Inspection Satellite

DTIC Science & Technology

1986-12-01

ADDRESS (City, State, and ZIP Code ) 10. SOURCE OF FUNDING NUMBERS PROGRAM PROJECT TASK WORK UNITELEMENT NO. NO. NO. CCESSION NO. 11. TITLE (include...Captain, USAF Dh t ibutioni Availabiity Codes Avail adlor Dist [Special December 1986 Approved for public release; distribution...lends itself to the technique of multi -objective analysis. The final step is planning for action. This communicates the entire systems engineering

25 CFR 36.104 - What are the requirements for heating, ventilation, cooling and lighting at dormitories?

Code of Federal Regulations, 2013 CFR

2013-04-01

... building codes in the Bureau of Indian Affairs “School Facilities Design Handbook,” dated March 30, 2007... any proposal to change which building codes are included in the Bureau of Indian Affairs “School... inspect the Handbook at the Department of the Interior Library, Main Interior Building, 1849 C Street NW...

25 CFR 36.104 - What are the requirements for heating, ventilation, cooling and lighting at dormitories?

Code of Federal Regulations, 2014 CFR

2014-04-01

... building codes in the Bureau of Indian Affairs “School Facilities Design Handbook,” dated March 30, 2007... any proposal to change which building codes are included in the Bureau of Indian Affairs “School... inspect the Handbook at the Department of the Interior Library, Main Interior Building, 1849 C Street NW...

78 FR 5176 - Proposed Settlement Agreement Pursuant to the Comprehensive Environmental Response, Compensation...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-24

... comments received will be available for public inspection at 5 Post Office Square, Boston, MA 02109. DATES... Square, Suite 100, Mail Code OES 4-4, Boston, Massachusetts 02109-3912, by calling (617) 918-1895 or by... Square, Suite 100, Mail Code OES 4-4, Boston, Massachusetts 02109-3912 or via email at [email protected

Nintendo Wii Balance Board is sensitive to effects of visual tasks on standing sway in healthy elderly adults.

PubMed

Koslucher, Frank; Wade, Michael G; Nelson, Brent; Lim, Kelvin; Chen, Fu-Chen; Stoffregen, Thomas A

2012-07-01

Research has shown that the Nintendo Wii Balance Board (WBB) can reliably detect the quantitative kinematics of the center of pressure in stance. Previous studies used relatively coarse manipulations (1- vs. 2-leg stance, and eyes open vs. closed). We sought to determine whether the WBB could reliably detect postural changes associated with subtle variations in visual tasks. Healthy elderly adults stood on a WBB while performing one of two visual tasks. In the Inspection task, they maintained their gaze within the boundaries of a featureless target. In the Search task, they counted the occurrence of designated target letters within a block of text. Consistent with previous studies using traditional force plates, the positional variability of the center of pressure was reduced during performance of the Search task, relative to movement during performance of the Inspection task. Using detrended fluctuation analysis, a measure of movement dynamics, we found that COP trajectories were more predictable during performance of the Search task than during performance of the Inspection task. The results indicate that the WBB is sensitive to subtle variations in both the magnitude and dynamics of body sway that are related to variations in visual tasks engaged in during stance. The WBB is an inexpensive, reliable technology that can be used to evaluate subtle characteristics of body sway in large or widely dispersed samples. Copyright © 2012 Elsevier B.V. All rights reserved.

ANSI/AIAA S-081A, Pressure Vessel Standards Implementation Guidelines

NASA Technical Reports Server (NTRS)

Greene, Nathanael J.

2009-01-01

The stress rupture specification for Composite Overwrapped Pressure Vessels (COPV) is discussed. The composite shell of the COPV shall be designed to meet the design life considering the time it is under sustained load. A Mechcanical Damage Control Plan (MDCP) shall be created and implemented that assures the COPV will not fail due to mechanical damage due to manufacturing, testing, shipping, installation, or flight. Proven processes and procedures for fabrication and repair shall be used to preclude damage or material degradation during material processing, manufacturing operations, and refurbushment.Selected NDI techniques for the liner and/or boss(es) shall be performed before overwrapping with composite. When visual inspection reveals mechanical damage or defects exceeding manufacturing specification levels (and standard repair procedures), the damaged COPV shall be submitted to a material review board (MRB) for disposition. Every COPV shall be subjected to visual and other non-destructive inspection (NDI), per the inspection plan.

Advanced in In Situ Inspection of Automated Fiber Placement Systems

NASA Technical Reports Server (NTRS)

Juarez, Peter D.; Cramer, K. Elliott; Seebo, Jeffrey P.

2016-01-01

Automated Fiber Placement (AFP) systems have been developed to help take advantage of the tailorability of composite structures in aerospace applications. AFP systems allow the repeatable placement of uncured, spool fed, preimpregnated carbon fiber tape (tows) onto substrates in desired thicknesses and orientations. This automated process can incur defects, such as overlapping tow lines, which can severely undermine the structural integrity of the part. Current defect detection and abatement methods are very labor intensive, and still mostly rely on human manual inspection. Proposed is a thermographic in situ inspection technique which monitors tow placement with an on board thermal camera using the preheated substrate as a through transmission heat source. An investigation of the concept is conducted, and preliminary laboratory results are presented. Also included will be a brief overview of other emerging technologies that tackle the same issue. Keywords: Automated Fiber Placement, Manufacturing defects, Thermography

Nde of Lumber and Natural Fiber Based Products with Air Coupled Ultrasound

NASA Astrophysics Data System (ADS)

Hsu, David K.; Utrata, David; Kuo, Monlin

2010-02-01

Due to the porous nature of wood and natural fiber based products, conventional fluid or gel coupled ultrasonic inspection is unsuitable. Air-coupled ultrasonic transmission scanning, being non-contact, is ideally suited for inspecting lumber, wood and natural fiber based products. We report here several successful applications of air-coupled ultrasound for the inspection of wood. Air-coupled ultrasonic scan at 120 kHz can easily detect "sinker-stock" lumber in which bacterial damage of ray tissue cells had occurred during anaerobic pond storage. Channels in ash lumber board caused by insect bore were imaged in transmission scan. Delamination and material inhomogeneities were mapped out in manufactured wood and natural fiber products including medium density fiberboards, compression molded shredded waste wood with formaldehyde resin, and acoustic panels molded with kenaf fibers. The study has demonstrated some of the capabilities of air-coupled ultrasound in the NDE of forest products.

MCNP calculations for container inspection with tagged neutrons

NASA Astrophysics Data System (ADS)

Boghen, G.; Donzella, A.; Filippini, V.; Fontana, A.; Lunardon, M.; Moretto, S.; Pesente, S.; Zenoni, A.

2005-12-01

We are developing an innovative tagged neutrons inspection system (TNIS) for cargo containers: the system will allow us to assay the chemical composition of suspect objects, previously identified by a standard X-ray radiography. The operation of the system is extensively being simulated by using the MCNP Monte Carlo code to study different inspection geometries, cargo loads and hidden threat materials. Preliminary simulations evaluating the signal and the signal over background ratio expected as a function of the system parameters are presented. The results for a selection of cases are briefly discussed and demonstrate that the system can operate successfully in different filling conditions.

75 FR 3335 - International Fisheries; Western and Central Pacific Fisheries for Highly Migratory Species...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-21

... boarding and inspection on the high seas, among others. NMFS has determined that this action is necessary... fishing for highly migratory species (HMS) on the high seas in the Convention Area will be required to... Region, supplemental to, and as an endorsement on, the permits issued under the authority of the High...

49 CFR 1114.30 - Production of documents and records and entry upon land for inspection and other purposes.

Code of Federal Regulations, 2014 CFR

2014-10-01

... measuring, surveying, photographing, testing, or sampling the property or any designated object or operation... approval of the Board. The party seeking such approval must file an appropriate motion containing an... ensure the agreement is kept confidential. The motion seeking approval may be filed at any time after the...

49 CFR 1114.30 - Production of documents and records and entry upon land for inspection and other purposes.

Code of Federal Regulations, 2011 CFR

2011-10-01

... measuring, surveying, photographing, testing, or sampling the property or any designated object or operation... approval of the Board. The party seeking such approval must file an appropriate motion containing an... ensure the agreement is kept confidential. The motion seeking approval may be filed at any time after the...

49 CFR 1114.30 - Production of documents and records and entry upon land for inspection and other purposes.

Code of Federal Regulations, 2013 CFR

2013-10-01

... measuring, surveying, photographing, testing, or sampling the property or any designated object or operation... approval of the Board. The party seeking such approval must file an appropriate motion containing an... ensure the agreement is kept confidential. The motion seeking approval may be filed at any time after the...

49 CFR 1114.30 - Production of documents and records and entry upon land for inspection and other purposes.

Code of Federal Regulations, 2012 CFR

2012-10-01

... measuring, surveying, photographing, testing, or sampling the property or any designated object or operation... approval of the Board. The party seeking such approval must file an appropriate motion containing an... ensure the agreement is kept confidential. The motion seeking approval may be filed at any time after the...

14 CFR 01 - Authority Under Which Accounting and Reporting Rules and Regulations are Prescribed and Administered

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Authority Under Which Accounting and... REGULATIONS UNIFORM SYSTEM OF ACCOUNTS AND REPORTS FOR LARGE CERTIFICATED AIR CARRIERS Section 01 Authority... shall have authority under the orders of the Board to inspect and examine any and all such lands...

78 FR 46682 - CSX Transportation, Inc.-Joint Use-Louisville & Indiana Railroad Company, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

... Line would receive faster service and be able to use taller and heavier cars. L&I would continue to... receive faster service and be able to use heavier and taller cars. The Board's findings regarding... CFR 1180.4(a)(3). Such documents are available for inspection in the Docket File Reading Room (Room...

Non-destructive Analysis Reveals Effect of Installation Details on Plywood Siding Performance

Treesearch

Christopher G. Hunt; Gregory T. Schueneman; Steven Lacher; Xiping Wang; R. Sam Williams

2015-01-01

This study evaluated the influence of a variety of construction techniques on the performance of plywood siding and the applied paint, using both ultrasound and conventional visual inspection techniques. The impact of bottom edge contact, flashing vs. caulking board ends, priming the bottom edge, location (Wisconsin vs. Mississippi) and a gap behind the siding to...

Qualitative analysis of Camel Snus' website message board--users' product perceptions, insights and online interactions.

PubMed

Wackowski, Olivia Ann; Lewis, M Jane; Delnevo, Cristine D

2011-03-01

In 2006, RJ Reynolds began test-marketing Camel Snus, a new smokeless tobacco (SLT) product. Promotion included use of a brand website, a relatively new marketing channel used by tobacco companies, which allowed visitors to learn about the product and discuss it with others on the website's message board. Our study aimed to examine early experiences with and perceptions of Camel Snus as described by board contributors and also to consider the use and benefits of the message board for both consumers and the company. We conducted a qualitative analysis, coding each message in Atlas.Ti and analysing it for emerging themes and patterns. Messages were also coded for demographic information where evident, such as tobacco use status and geographical location. Descriptive data and illustrative quotes are presented. Board participants described being introduced to Camel Snus through free samples. Favourable evaluations were posted by current smokers who had never tried SLT before as well as current users of other SLT brands. Messages indicated both initiation of dual product use among smokers and product substitution. Participants used the board to advise each other on how to use the product, where to get more, suggest ways RJ Reynolds could improve the product and to encourage RJ Reynolds to release it nationally. Camel Snus has appeal for at least some smokers and SLT users. Camel Snus' website message board may have been a doubly beneficial marketing feature in both connecting product users and providing product feedback to the company during test-marketing.

Naval Law Review. Volume 48

DTIC Science & Technology

2001-01-01

from airports and hotels, Internet cafes , libraries, and even cellular phones. This unmatched versatility has made e-mail the preferred method of...8217 contention, however, was not that the Franchise Tax Board applied the wrong section of the code; it was that the code “unfairly taxed the wife’s

75 FR 8246 - Approval and Promulgation of Air Quality Implementation Plans; Indiana; Volatile Organic Compound...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

...)(2).) List of Subjects in 40 CFR Part 52 Environmental protection, Air pollution control...) Incorporation by reference. (A) Indiana Administrative Code Title 326: Air Pollution Control Board, Article 8..., 2009 (DIN: 20091202-IR-326090220FRA). (B) Indiana Administrative Code Title 326: Air Pollution Control...

75 FR 61139 - Board of Scientific Counselors (BOSC); Request for Nominations of Experts

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-04

.... Heather Drumm, Mail Code 8104-R, Office of Science Policy, Office of Research and Development... and bioinformatics); socioeconomics; environmental justice, science policy (research, policy, and.... Acting Director, Office of Science Policy . [FR Doc. 2010-24805 Filed 10-1-10; 8:45 am] BILLING CODE 6560...

Medical Device Plug-and-Play Interoperability Standards and Technology Leadership

DTIC Science & Technology

2012-10-01

External Network Pump Adapter PulseOx Adapter • MD MP3 cart is a platform for the development of smart pump control algorithms • It includes...delivery with bounded latency Medical Device Mobile PnP Prototype Platform (MD MP3 ) • Got MDCF code to run on the BeagleBoard development boards we are

Key Science and Engineering Indicators: 2010 Digest. NSB 10-02

ERIC Educational Resources Information Center

Roesel, Cheryl, Ed.

2010-01-01

The National Science Board (Board) is required under the National Science Foundation (NSF) Act, 42 U.S.C. (United States Code) Section 1863 (j) (1) to prepare and transmit the biennial "Science and Engineering Indicators" ("SEI") report to the President and to the Congress by January 15 of every even-numbered year. The report…

21 CFR 184.1205 - Calcium hydroxide.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Constitution Ave. NW., Washington, DC 20418, or available for inspection at the National Archives and Records...: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. (c) In...

21 CFR 184.1191 - Calcium carbonate.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Constitution Ave. NW., Washington, DC 20418, or available for inspection at the National Archives and Records...: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. (c) In...

21 CFR 184.1191 - Calcium carbonate.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Constitution Ave. NW., Washington, DC 20418, or available for inspection at the National Archives and Records...: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. (c) In...

21 CFR 184.1205 - Calcium hydroxide.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Constitution Ave. NW., Washington, DC 20418, or available for inspection at the National Archives and Records...: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. (c) In...

Rocket Propellant Talk at the 1957 NACA Lewis Inspection

NASA Image and Video Library

1957-10-21

A researcher works a demonstration board in the Rocket Engine Test Facility during the 1957 Inspection of the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory in Cleveland, Ohio. Representatives from the military, aeronautical industry, universities, and the press were invited to the laboratory to be briefed on the NACA’s latest research efforts and tour the test facilities. Over 1700 people visited the Lewis during the October 7-10, 1957 Inspection. The Soviet Union launched their first Sputnik satellite just days before on October 4. NACA Lewis had been involved in small rockets and propellants research since 1945, but the NACA leadership was wary of involving itself too deeply with the work since ballistics traditionally fell under the military’s purview. The Lewis research was performed by the High Temperature Combustion section in the Fuels and Lubricants Division in a series of small cinderblock test cells. The rocket group was expanded in 1952 and made several test runs in late 1954 using liquid hydrogen as a propellant. A larger test facility, the Rocket Engine Test Facility, was approved and became operational just in time for the Inspection.

Remote inspection with multi-copters, radiological sensors and SLAM techniques

NASA Astrophysics Data System (ADS)

Carvalho, Henrique; Vale, Alberto; Marques, Rúben; Ventura, Rodrigo; Brouwer, Yoeri; Gonçalves, Bruno

2018-01-01

Activated material can be found in different scenarios, such as in nuclear reactor facilities or medical facilities (e.g. in positron emission tomography commonly known as PET scanning). In addition, there are unexpected scenarios resulting from possible accidents, or where dangerous material is hidden for terrorism attacks using nuclear weapons. Thus, a technological solution is important to cope with fast and reliable remote inspection. The multi-copter is a common type of Unmanned Aerial Vehicle (UAV) that provides the ability to perform a first radiological inspection in the described scenarios. The paper proposes a solution with a multi-copter equipped with on-board sensors to perform a 3D reconstruction and a radiological mapping of the scenario. A depth camera and a Geiger-Müler counter are the used sensors. The inspection is performed in two steps: i) a 3D reconstruction of the environment and ii) radiation activity inference to localise and quantify sources of radiation. Experimental results were achieved with real 3D data and simulated radiation activity. Experimental tests with real sources of radiation are planned in the next iteration of the work.

Public health accreditation and metrics for ethics: a case study on environmental health and community engagement.

PubMed

Bernheim, Ruth Gaare; Stefanak, Matthew; Brandenburg, Terry; Pannone, Aaron; Melnick, Alan

2013-01-01

As public health departments around the country undergo accreditation using the Public Health Accreditation Board standards, the process provides a new opportunity to integrate ethics metrics into day-to-day public health practice. While the accreditation standards do not explicitly address ethics, ethical tools and considerations can enrich the accreditation process by helping health departments and their communities understand what ethical principles underlie the accreditation standards and how to use metrics based on these ethical principles to support decision making in public health practice. We provide a crosswalk between a public health essential service, Public Health Accreditation Board community engagement domain standards, and the relevant ethical principles in the Public Health Code of Ethics (Code). A case study illustrates how the accreditation standards and the ethical principles in the Code together can enhance the practice of engaging the community in decision making in the local health department.

a Proposed Benchmark Problem for Scatter Calculations in Radiographic Modelling

NASA Astrophysics Data System (ADS)

Jaenisch, G.-R.; Bellon, C.; Schumm, A.; Tabary, J.; Duvauchelle, Ph.

2009-03-01

Code Validation is a permanent concern in computer modelling, and has been addressed repeatedly in eddy current and ultrasonic modeling. A good benchmark problem is sufficiently simple to be taken into account by various codes without strong requirements on geometry representation capabilities, focuses on few or even a single aspect of the problem at hand to facilitate interpretation and to avoid that compound errors compensate themselves, yields a quantitative result and is experimentally accessible. In this paper we attempt to address code validation for one aspect of radiographic modeling, the scattered radiation prediction. Many NDT applications can not neglect scattered radiation, and the scatter calculation thus is important to faithfully simulate the inspection situation. Our benchmark problem covers the wall thickness range of 10 to 50 mm for single wall inspections, with energies ranging from 100 to 500 keV in the first stage, and up to 1 MeV with wall thicknesses up to 70 mm in the extended stage. A simple plate geometry is sufficient for this purpose, and the scatter data is compared on a photon level, without a film model, which allows for comparisons with reference codes like MCNP. We compare results of three Monte Carlo codes (McRay, Sindbad and Moderato) as well as an analytical first order scattering code (VXI), and confront them to results obtained with MCNP. The comparison with an analytical scatter model provides insights into the application domain where this kind of approach can successfully replace Monte-Carlo calculations.

21 CFR 184.1081 - Propionic acid.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., 2101 Constitution Ave. NW., Washington, DC 20418, or available for inspection at the National Archives... 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr...

Pressure system recertification at NASA-Langley Research Center

NASA Technical Reports Server (NTRS)

Hudson, C. M.; Ramsey, J. W., Jr.

1983-01-01

Langley Research Center pressure systems are being recertified to ensure safe operation of these systems. The procedures for recertifying these pressure systems are reviewed. Generally, the analysis and inspection requirements outlined in the appropriate national consensus codes are followed. In some instances where the requirements of these codes are not met. The systems are analyzed further, repaired, modified and/or tested to demonstrate their structural integrity.

Employing a communication payload on an unmanned underwater vehicle (UUV) for harbor monitoring and homeland defense

NASA Astrophysics Data System (ADS)

Wells, Jeffrey S.; Wurth, Timothy J.; Manning, Mark C.

2004-09-01

The Homeland Defense community is increasing its focus on port security and harbor protection. Rising to the challenge, the U.S. Coast Guard is tasked with monitoring and protecting our harbors where commercial container ships enter. Tracking of the onboard containers is of great concern to the protectors of the waterfront. A system capable of identifying the number of containers onboard the vessel, when the containers are added or removed, contents of the containers, etc., will significantly reduce the potential for a security problem by providing essential information to the Coast Guard or other port security so that they can decide whether or not pre-boarding is necessary. That is, boarding the ship and inspecting the cargo while still at a safe distance from the harbor. A conceptual pictorial of this concept is shown in Figure 1. This paper presents a system that utilizes transmitters embedded on the containers which incorporate unique ID codes identifying the container, its history, and other information. A Communication/Navigation Aid (C/NA) type vehicle/buoy concept, presently being developed by Sippican (under contract to the Office of Naval Research (ONR) as part of the Autonomous Operations -- Future Naval Capabilities (AO-FNC) program, positioned at sea, would include a payload of NuWaves" communication transceivers able to receive the cargo container"s transmitted ID and forward this information by RF link to a ground station. The Port Authority and/or the Coast Guard would then utilize the information to make an assessment of the vessel prior to port entry. Although, this paper illustrates a scenario applicable to the cargo shipping industry, it is also applicable to other homeland defense areas such as unattended open ocean force protection, drug and law enforcement, and environmental monitoring.

77 FR 25480 - Corporation To Do Business Under the Federal Reserve Act

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-30

... in acting on the application are set forth in the Board's Regulation K (12 CFR 211.4). The... Reserve Act (Edge Corporation) 12 U.S.C. Sec. 611 et seq., and all other applicable statutes and... Secretary of the Board. [FR Doc. 2012-10345 Filed 4-27-12; 8:45 am] BILLING CODE 6210-01-P ...

40 CFR 86.1806-04 - On-board diagnostics.

Code of Federal Regulations, 2013 CFR

2013-07-01

... codes shall be consistent with SAE J2012 “Diagnostic Trouble Code Definitions—Equivalent to ISO/DIS... sent to the scan tool over a J1850 data link shall use the Cyclic Redundancy Check and the three byte..., definitions and abbreviations shall be formatted according to SAE J1930 “Electrical/Electronic Systems...

40 CFR 86.1806-04 - On-board diagnostics.

Code of Federal Regulations, 2012 CFR

2012-07-01

... codes shall be consistent with SAE J2012 “Diagnostic Trouble Code Definitions—Equivalent to ISO/DIS... sent to the scan tool over a J1850 data link shall use the Cyclic Redundancy Check and the three byte..., definitions and abbreviations shall be formatted according to SAE J1930 “Electrical/Electronic Systems...

40 CFR 86.1806-04 - On-board diagnostics.

Code of Federal Regulations, 2011 CFR

2011-07-01

... codes shall be consistent with SAE J2012 “Diagnostic Trouble Code Definitions—Equivalent to ISO/DIS... sent to the scan tool over a J1850 data link shall use the Cyclic Redundancy Check and the three byte..., definitions and abbreviations shall be formatted according to SAE J1930 “Electrical/Electronic Systems...

Analysis of On-Board Oxygen and Nitrogen Generation Systems for Surface Vessels.

DTIC Science & Technology

1983-06-01

and Pressure Vessel Code SAE AIR 822 Oxygen for General Aviation Aircraft SAE AIR 825 Oxygen for Aircrafts SAE AIR 1059 Transportation and Maintenance...OF THE TITLE MIL-T-27730 Threaded Components MIL-P-27401 A 40 Micron Filter For Nitrogen MIL-V-33650 Internal Straight Threads ASME Code VIII Boiler

Automated Source-Code-Based Testing of Object-Oriented Software

NASA Astrophysics Data System (ADS)

Gerlich, Ralf; Gerlich, Rainer; Dietrich, Carsten

2014-08-01

With the advent of languages such as C++ and Java in mission- and safety-critical space on-board software, new challenges for testing and specifically automated testing arise. In this paper we discuss some of these challenges, consequences and solutions based on an experiment in automated source- code-based testing for C++.

Design and Control of Omnidirectional Unmanned Ground Vehicles for Rough Terrain

DTIC Science & Technology

2012-08-29

company, Quantum Signal. This rigid body dynamics simulation, housed within the Autonomous Navigation and Virtual Environment Laboratory (ANVEL) software...72 Figure 22: PIC main code. Page 24 of 72 Figure 23: PIC interrupt code. 3.3 Central Body Embedded Electronics As described above...located on the main body of the vehicle. This section describes how the on-board electronics works. The outline of the code is presented as is how

Nondestructive web thickness measurement of micro-drills with an integrated laser inspection system

NASA Astrophysics Data System (ADS)

Chuang, Shui-Fa; Chen, Yen-Chung; Chang, Wen-Tung; Lin, Ching-Chih; Tarng, Yeong-Shin

2010-09-01

Nowadays, the electric and semiconductor industries use numerous micro-drills to machine micro-holes in printed circuit boards. The measurement of web thickness of micro-drills, a key parameter of micro-drill geometry influencing drill rigidity and chip-removal ability, is quite important to ensure quality control. Traditionally, inefficiently destructive measuring method is adopted by inspectors. To improve quality and efficiency of the web thickness measuring tasks, a nondestructive measuring method is required. In this paper, based on the laser micro-gauge (LMG) and laser confocal displacement meter (LCDM) techniques, a nondestructive measuring principle of web thickness of micro-drills is introduced. An integrated laser inspection system, mainly consisting of a LMG, a LCDM and a two-axis-driven micro-drill fixture device, was developed. Experiments meant to inspect web thickness of micro-drill samples with a nominal diameter of 0.25 mm were conducted to test the feasibility of the developed laser inspection system. The experimental results showed that the web thickness measurement could achieve an estimated repeatability of ± 1.6 μm and a worst repeatability of ± 7.5 μm. The developed laser inspection system, combined with the nondestructive measuring principle, was able to undertake the web thickness measuring tasks for certain micro-drills.

77 FR 45352 - Notice of Proposals To Engage in or To Acquire Companies Engaged in Permissible Nonbanking...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-31

... at the Federal Reserve Bank indicated. The notice also will be available for inspection at the... otherwise noted, comments regarding the applications must be received at the Reserve Bank indicated or the offices of the Board of Governors not later than August 15, 2012. A. Federal Reserve Bank of New York...

75 FR 28616 - Notice of Proposals to Engage in Permissible Nonbanking Activities or to Acquire Companies that...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-21

... United States. Each notice is available for inspection at the Federal Reserve Bank indicated. The notice... applications must be received at the Reserve Bank indicated or the offices of the Board of Governors not later than June 4, 2010. A. Federal Reserve Bank of New York (Ivan Hurwitz, Vice President) 33 Liberty Street...

Inspection and Quality Assurance in Government Contracts.

DTIC Science & Technology

1983-01-01

of Defective Performance . . . . . . . . .. 130 Estoppel Generally . . . . . ... 132 The Government Duty to Speak . . . .. 136 A Government Agent...of ratification of agreements or escaping the absence of inspector authority 62 under the changes clause to order changes. Estoppel Generally Once one...define the rationale for a result favoring the contractor in these cases, the courts and boards are really applying the equitable doctrine of estoppel .6

46 CFR 78.17-75 - Requirements for fuel oil.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Requirements for fuel oil. 78.17-75 Section 78.17-75..., Drills, and Inspections § 78.17-75 Requirements for fuel oil. (a) It shall be the duty of the chief engineer to cause an entry in the log be made of each supply of fuel oil received on board, stating the...

46 CFR 196.15-55 - Requirements for fuel oil.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Requirements for fuel oil. 196.15-55 Section 196.15-55... Test, Drills, and Inspections § 196.15-55 Requirements for fuel oil. (a) It shall be the duty of the chief engineer to cause an entry in the log to be made of each supply of fuel oil received on board...

46 CFR 196.15-55 - Requirements for fuel oil.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Test, Drills, and Inspections § 196.15-55 Requirements for fuel oil. (a) It shall be the duty of the chief engineer to cause an entry in the log to be made of each supply of fuel oil received on board... 46 Shipping 7 2014-10-01 2014-10-01 false Requirements for fuel oil. 196.15-55 Section 196.15-55...

46 CFR 196.15-55 - Requirements for fuel oil.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Requirements for fuel oil. 196.15-55 Section 196.15-55... Test, Drills, and Inspections § 196.15-55 Requirements for fuel oil. (a) It shall be the duty of the chief engineer to cause an entry in the log to be made of each supply of fuel oil received on board...

46 CFR 78.17-75 - Requirements for fuel oil.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 3 2012-10-01 2012-10-01 false Requirements for fuel oil. 78.17-75 Section 78.17-75..., Drills, and Inspections § 78.17-75 Requirements for fuel oil. (a) It shall be the duty of the chief engineer to cause an entry in the log be made of each supply of fuel oil received on board, stating the...

46 CFR 196.15-55 - Requirements for fuel oil.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Requirements for fuel oil. 196.15-55 Section 196.15-55... Test, Drills, and Inspections § 196.15-55 Requirements for fuel oil. (a) It shall be the duty of the chief engineer to cause an entry in the log to be made of each supply of fuel oil received on board...

46 CFR 78.17-75 - Requirements for fuel oil.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 3 2013-10-01 2013-10-01 false Requirements for fuel oil. 78.17-75 Section 78.17-75..., Drills, and Inspections § 78.17-75 Requirements for fuel oil. (a) It shall be the duty of the chief engineer to cause an entry in the log be made of each supply of fuel oil received on board, stating the...

46 CFR 78.17-75 - Requirements for fuel oil.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 3 2014-10-01 2014-10-01 false Requirements for fuel oil. 78.17-75 Section 78.17-75..., Drills, and Inspections § 78.17-75 Requirements for fuel oil. (a) It shall be the duty of the chief engineer to cause an entry in the log be made of each supply of fuel oil received on board, stating the...

21 CFR 184.1141a - Ammonium phosphate, monobasic.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Academy Press, 2101 Constitution Ave. NW., Washington, DC 20418, or available for inspection at the... at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal...

21 CFR 184.1409 - Ground limestone.

Code of Federal Regulations, 2012 CFR

2012-04-01

... National Academy Press, 2101 Constitution Ave. NW., Washington, DC 20418, or available for inspection at... material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal...

21 CFR 184.1409 - Ground limestone.

Code of Federal Regulations, 2013 CFR

2013-04-01

... National Academy Press, 2101 Constitution Ave. NW., Washington, DC 20418, or available for inspection at... material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal...

21 CFR 184.1141b - Ammonium phosphate, dibasic.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., 2101 Constitution Ave. NW., Washington, DC 20418, or available for inspection at the National Archives... 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr...

Application of total distributed control system in car-body inspection

NASA Astrophysics Data System (ADS)

Yang, Xueyou; Ren, Dahai; Wang, Zhong; Ye, Shenghua; Lu, Hongbo; Duan, Jilin

1996-08-01

An application of distributed control system in Autocar-body Visual Inspection Station is presented in the paper, a distributed control system using PC as the host processor and single-chip microcomputer as the slave controller is proposed. In this paper, the physical interface of the control network and the relevant hardware are introduced. Meanwhile, a minute research on data communication is performed, relevant protocols on data framing, instruction codes and channel access methods have been laid down and part of related software is presented.

Distributed control system in a car-body inspection station

NASA Astrophysics Data System (ADS)

Yang, Xueyou; Ren, Dahai; Ye, Shenghua; Lu, Hongbo; Duan, Jilin

1997-06-01

In this paper, a distributed control network in autocar-body visual inspection station is presented in which PC is used as the host processor and single-chip microcomputers are employed as slave controllers. The physical interface of the control network and the relevant hardware are introduced in this paper. Meanwhile, a minute research on data communication is performed, relevant protocols on data framing, instruction codes and channel access methods have been laid down and part of related software is presented.

Non-destructive inspection protocol for reinforced concrete barriers and bridge railings

NASA Astrophysics Data System (ADS)

Chintakunta, Satish R.; Boone, Shane D.

2014-02-01

Reinforced concrete highway barriers and bridge railings serve to prevent errant vehicles from departing the travel way at grade separations. Despite the important role that they play in maintaining safety and their ubiquitous nature, barrier inspection rarely moves beyond visual inspection. In August 2008, a tractor-trailer fatally departed William Preston Lane, Jr. Memorial Bridge after it dislodged a section of the bridge barrier. Investigations following the accident identified significant corrosion of the anchor bolts attaching the bridge railing to the bridge deck. As a result of the information gathered during its investigation of the accident, the National Transportation Safety Board (NTSB) made recommendations to the Federal Highway Administration concerning Non-Destructive Evaluation (NDE) of concrete bridge railings. The Center for nondestructive evaluation (NDE) at Turner Fairbank Highway Research Center in McLean, VA is currently evaluating feasibility of using four technologies - ground penetrating radar (GPR), ultrasonic pulse-echo, digital radiography and infrared thermal imaging methods to develop bridge inspection methods that augment visual inspections, offer reliable measurement techniques, and are practical, both in terms of time and cost, for field inspection work. Controlled samples containing predefined corrosion levels in reinforcing steel were embedded at barrier connection points for laboratory testing. All four NDE techniques were used in the initial phase I testing. An inspection protocol for detecting and measuring the corrosion of reinforced steel embedded in the anchorage system will be developed as part of phase II research. The identified technologies shall be further developed for field testing utilizing a structure with a barrier in good condition and a structure with a barrier in poor condition.

77 FR 13126 - Corporation to do Business Under Section 25A of the Federal Reserve Act

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

... in acting on the application are set forth in the Board's Regulation K (12 CFR 211.4). The... Federal Reserve Act (Edge Corporation) 12 U.S.C. 611 et seq., and all other applicable statutes and.... Frierson, Deputy Secretary of the Board. [FR Doc. 2012-5268 Filed 3-2-12; 8:45 am] BILLING CODE 6210-01-P ...

Morse Monte Carlo Radiation Transport Code System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Emmett, M.B.

1975-02-01

The report contains sections containing descriptions of the MORSE and PICTURE codes, input descriptions, sample problems, deviations of the physical equations and explanations of the various error messages. The MORSE code is a multipurpose neutron and gamma-ray transport Monte Carlo code. Time dependence for both shielding and criticality problems is provided. General three-dimensional geometry may be used with an albedo option available at any material surface. The PICTURE code provide aid in preparing correct input data for the combinatorial geometry package CG. It provides a printed view of arbitrary two-dimensional slices through the geometry. By inspecting these pictures one maymore » determine if the geometry specified by the input cards is indeed the desired geometry. 23 refs. (WRF)« less

Toward Intelligent Software Defect Detection

NASA Technical Reports Server (NTRS)

Benson, Markland J.

2011-01-01

Source code level software defect detection has gone from state of the art to a software engineering best practice. Automated code analysis tools streamline many of the aspects of formal code inspections but have the drawback of being difficult to construct and either prone to false positives or severely limited in the set of defects that can be detected. Machine learning technology provides the promise of learning software defects by example, easing construction of detectors and broadening the range of defects that can be found. Pinpointing software defects with the same level of granularity as prominent source code analysis tools distinguishes this research from past efforts, which focused on analyzing software engineering metrics data with granularity limited to that of a particular function rather than a line of code.

Universities and Industry: Does the Lambert Code of Governance Meet the Requirements of Good Governance?

ERIC Educational Resources Information Center

Buckland, Roger

2004-01-01

The Lambert Model Code of Governance proposes to institutionalise the dominance of governors from commercial and industrial organisations as core members of compact and effective boards controlling UK universities. It is the latest expression of a fashion for viewing university governance as an overly-simple example of an obsolete system, where…

Quantitative and Qualitative Analysis of Nutrition and Food Safety Information in School Science Textbooks of India

ERIC Educational Resources Information Center

Subba Rao, G. M.; Vijayapushapm, T.; Venkaiah, K.; Pavarala, V.

2012-01-01

Objective: To assess quantity and quality of nutrition and food safety information in science textbooks prescribed by the Central Board of Secondary Education (CBSE), India for grades I through X. Design: Content analysis. Methods: A coding scheme was developed for quantitative and qualitative analyses. Two investigators independently coded the…

International Maritime Organizational Code For Safe Carriage Of Irradiated Nuclear Fuel, Plutonium and High-Level Radioactive Wastes in Flasks On Board Ships -- IMO Resolution A.748(18)

DOT National Transportation Integrated Search

1994-05-26

This Circular calls the attention of Coast Guard field units, marine surveyors, shippers and carriers of nuclear materials to the International Maritime Organization (IMO) Code for the Safe Carriage of Irradiated Nuclear Fuel, Plutonium and High-Leve...

Use of geographic information systems technology to track critical health code violations in retail facilities available to populations of different socioeconomic status and demographics.

PubMed

Darcey, Valerie L; Quinlan, Jennifer J

2011-09-01

Research shows that community socioeconomic status (SES) predicts, based on food service types available, whether a population has access to healthy food. It is not known, however, if a relationship exists between SES and risk for foodborne illness (FBI) at the community level. Geographic information systems (GIS) give researchers the ability to pinpoint health indicators to specific geographic locations and detect resulting environmental gradients. It has been used extensively to characterize the food environment, with respect to access to healthy foods. This research investigated the utility of GIS in determining whether community SES and/or demographics relate to access to safe food, as measured by food service critical health code violations (CHV) as a proxy for risk for FBI. Health inspection records documenting CHV for 10,859 food service facilities collected between 2005 and 2008 in Philadelphia, PA, were accessed. Using an overlay analysis through GIS, CHV were plotted over census tracts of the corresponding area. Census tracts (n = 368) were categorized into quintiles, based on poverty level. Overall, food service facilities in higher poverty areas had a greater number of facilities (with at least one CHV) and had more frequent inspections than facilities in lower poverty areas. The facilities in lower poverty areas, however, had a higher average number of CHV per inspection. Analysis of CHV rates in census tracts with high concentrations of minority populations found Hispanic facilities had more CHV than other demographics, and Hispanic and African American facilities had fewer days between inspections. This research demonstrates the potential for utilization of GIS mapping for tracking risks for FBI. Conversely, it sheds light on the subjective nature of health inspections, and indicates that underlying factors might be affecting inspection frequency and identification of CHV, such that CHV might not be a true proxy for risk for FBI.

Gamma signatures of the C-BORD Tagged Neutron Inspection System

NASA Astrophysics Data System (ADS)

Sardet, A.; Pérot, B.; Carasco, C.; Sannié, G.; Moretto, S.; Nebbia, G.; Fontana, C.; Pino, F.; Iovene, A.; Tintori, C.

2018-01-01

In the frame of C-BORD project (H2020 program of the EU), a Rapidly relocatable Tagged Neutron Inspection System (RRTNIS) is being developed to non-intrusively detect explosives, chemical threats, and other illicit goods in cargo containers. Material identification is performed through gamma spectroscopy, using twenty NaI detectors and four LaBr3 detectors, to determine the different elements composing the inspected item from their specific gamma signatures induced by fast neutrons. This is performed using an unfolding algorithm to decompose the energy spectrum of a suspect item, selected by X-ray radiography and on which the RRTNIS inspection is focused, on a database of pure element gamma signatures. This paper reports on simulated signatures for the NaI and LaBr3 detectors, constructed using the MCNP6 code. First experimental spectra of a few elements of interest are also presented.

ISPOR Code of Ethics 2017 (4th Edition).

PubMed

Santos, Jessica; Palumbo, Francis; Molsen-David, Elizabeth; Willke, Richard J; Binder, Louise; Drummond, Michael; Ho, Anita; Marder, William D; Parmenter, Louise; Sandhu, Gurmit; Shafie, Asrul A; Thompson, David

2017-12-01

As the leading health economics and outcomes research (HEOR) professional society, ISPOR has a responsibility to establish a uniform, harmonized international code for ethical conduct. ISPOR has updated its 2008 Code of Ethics to reflect the current research environment. This code addresses what is acceptable and unacceptable in research, from inception to the dissemination of its results. There are nine chapters: 1 - Introduction; 2 - Ethical Principles respect, beneficence and justice with reference to a non-exhaustive compilation of international, regional, and country-specific guidelines and standards; 3 - Scope HEOR definitions and how HEOR and the Code relate to other research fields; 4 - Research Design Considerations primary and secondary data related issues, e.g., participant recruitment, population and research setting, sample size/site selection, incentive/honorarium, administration databases, registration of retrospective observational studies and modeling studies; 5 - Data Considerations privacy and data protection, combining, verification and transparency of research data, scientific misconduct, etc.; 6 - Sponsorship and Relationships with Others (roles of researchers, sponsors, key opinion leaders and advisory board members, research participants and institutional review boards (IRBs) / independent ethics committees (IECs) approval and responsibilities); 7 - Patient Centricity and Patient Engagement new addition, with explanation and guidance; 8 - Publication and Dissemination; and 9 - Conclusion and Limitations. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

46 CFR 153.909 - Completing the Cargo Record Book and record retention: Categories A, B, C, and D.

Code of Federal Regulations, 2010 CFR

2010-10-01

... on board and readily available for inspection and copying by the Coast Guard and when the ship is a U... (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS... and record retention: Categories A, B, C, and D. (a) The person in charge of a ship shall ensure that...

Performance of Color Camera Machine Vision in Automated Furniture Rough Mill Systems

Treesearch

D. Earl Kline; Agus Widoyoko; Janice K. Wiedenbeck; Philip A. Araman

1998-01-01

The objective of this study was to evaluate the performance of color camera machine vision for lumber processing in a furniture rough mill. The study used 134 red oak boards to compare the performance of automated gang-rip-first rough mill yield based on a prototype color camera lumber inspection system developed at Virginia Tech with both estimated optimum rough mill...

The Fit between School Board Control and Behaviour of Middle Managers, Team Leaders and Teachers in Dutch Colleges for Vocational Education and Training

ERIC Educational Resources Information Center

Honingh, Marlies; van Genugten, Marieke

2017-01-01

The inspectorate's judgements about a school's educational quality in the Netherlands are to a large extent based on sophisticated desk research, risk analyses and analyses of the school's self-evaluation reports. This relatively distant mode of inspecting schools relies on rational ideas about organizational management and control while aspects…

Push plate, mounting assembly, circuit board, and method of assembling thereof for ball grid array packages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaughn, Mark R.; Montague, Stephen

A push plate that includes springs in the form of cantilever flexures and an inspection window is disclosed. The push plate provides a known, uniform, down force and minimal torque to a package to be tested. The cantilevers have a known, calculable down force producing stiffness. The window provides for viewing of the package during testing.

75 FR 12240 - Change in Bank Control Notices; Acquisition of Shares of Bank or Bank Holding Companies

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-15

.... Michael Montgomery, Dallas, Texas; to acquire voting shares of Casey Bancorp., Inc., and thereby.... 1817(j)) and Sec. [thinsp]225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire a bank or bank... the Act (12 U.S.C. 1817(j)(7)). The notices are available for immediate inspection at the Federal...

U. S. Naval Forces, Vietnam Monthly Historical Supplement for July 1968

DTIC Science & Technology

1969-05-06

o . . 1 . i & Operation MARKET TIME. *. . .. .. ... . ..0 - . .. -1 MARKET TIME Units... .... ... . .o. .e. . . . 18 - MARKET TME Statistical...incursions into unpatrolled rivers, A record number -of naval gunfire support missions were fired by MARKET TBE units. GAME WARDEN patrol craft...and Fourth Coastal Zone Operations . . .• 16 5. (G) MARKET TIME Detections, Inspections, Boardings . , 20 6. (G) STABLE DOOR Detections, Ins~nctios9

Capacitance probe for detection of anomalies in non-metallic plastic pipe

DOEpatents

Mathur, Mahendra P.; Spenik, James L.; Condon, Christopher M.; Anderson, Rodney; Driscoll, Daniel J.; Fincham, Jr., William L.; Monazam, Esmail R.

2010-11-23

The disclosure relates to analysis of materials using a capacitive sensor to detect anomalies through comparison of measured capacitances. The capacitive sensor is used in conjunction with a capacitance measurement device, a location device, and a processor in order to generate a capacitance versus location output which may be inspected for the detection and localization of anomalies within the material under test. The components may be carried as payload on an inspection vehicle which may traverse through a pipe interior, allowing evaluation of nonmetallic or plastic pipes when the piping exterior is not accessible. In an embodiment, supporting components are solid-state devices powered by a low voltage on-board power supply, providing for use in environments where voltage levels may be restricted.

Researcher Rehearses for the NACA’s 1957 Inspection

NASA Image and Video Library

1957-10-21

A researcher operates a demonstration board regarding high-energy propellants during the 1957 Inspection of the NACA’s Lewis Flight Propulsion Laboratory in Cleveland, Ohio. Representatives from the military, aeronautical industry, universities, and the press were invited to the laboratory to be briefed on the NACA’s latest research efforts and tour the test facilities. Over 1700 people visited the Lewis during the October 7-10, 1957 Inspection. NACA Executive Secretary John Victory is said to have heard one of the researchers mention outer space during rehearsals for the event. Victory ordered the remark removed so as not give the perception to the visiting dignitaries that the NACA was spending too many of its resources on non-aeronautical pursuits. The launch of Sputnik I by the Soviet Union days before the event changed everything. The dignitaries wanted to hear about the NACA’s rocket work and its space ambitions. The original talks were given, including this one on Lewis’ recent achievements with high-energy propellants.

Quality of clinical trials: A moving target

PubMed Central

Bhatt, Arun

2011-01-01

Quality of clinical trials depends on data integrity and subject protection. Globalization, outsourcing and increasing complexicity of clinical trials have made the target of achieving global quality challenging. The quality, as judged by regulatory inspections of the investigator sites, sponsors/contract research organizations and Institutional Review Board, has been of concern to the US Food and Drug Administration, as there has been hardly any change in frequency and nature of common deficiencies. To meet the regulatory expectations, the sponsors need to improve quality by developing systems with specific standards for each clinical trial process. The quality systems include: personnel roles and responsibilities, training, policies and procedures, quality assurance and auditing, document management, record retention, and reporting and corrective and preventive action. With an objective to improve quality, the FDA has planned new inspection approaches such as risk-based inspections, surveillance inspections, real-time oversight, and audit of sponsor quality systems. The FDA has partnered with Duke University for Clinical Trials Transformation Initiative, which will conduct research projects on design principles, data quality and quantity including monitoring, study start-up, and adverse event reporting. These recent initiatives will go a long way in improving quality of clinical trials. PMID:22145122

Airworthiness Designee Function Codes and Consolidated Directory for DMIR/DAR/ODAR/DAS/DOA and SFAR No. 36

DOT National Transportation Integrated Search

1997-05-01

This advisory circular (AC) contains information and guidance concerning : designee application, authorized functions, and initial and subseqent : certificates of authority for Designated Manufacturing Inspection : Representatives (DMIR), Designated ...

Curiosity Leaves Its Mark

NASA Image and Video Library

2012-08-29

This image shows a close-up of track marks from the first test drive of NASA Curiosity rover. The rover arm is visible in the foreground. A close inspection of the tracks reveals a unique, repeating pattern: Morse code for JPL.

Board Saver for Use with Developmental FPGAs

NASA Technical Reports Server (NTRS)

Berkun, Andrew

2009-01-01

A device denoted a board saver has been developed as a means of reducing wear and tear of a printed-circuit board onto which an antifuse field programmable gate array (FPGA) is to be eventually soldered permanently after a number of design iterations. The need for the board saver or a similar device arises because (1) antifuse-FPGA design iterations are common and (2) repeated soldering and unsoldering of FPGAs on the printed-circuit board to accommodate design iterations can wear out the printed-circuit board. The board saver is basically a solderable/unsolderable FPGA receptacle that is installed temporarily on the printed-circuit board. The board saver is, more specifically, a smaller, square-ring-shaped, printed-circuit board (see figure) that contains half via holes one for each contact pad along its periphery. As initially fabricated, the board saver is a wider ring containing full via holes, but then it is milled along its outer edges, cutting the via holes in half and laterally exposing their interiors. The board saver is positioned in registration with the designated FPGA footprint and each via hole is soldered to the outer portion of the corresponding FPGA contact pad on the first-mentioned printed-circuit board. The via-hole/contact joints can be inspected visually and can be easily unsoldered later. The square hole in the middle of the board saver is sized to accommodate the FPGA, and the thickness of the board saver is the same as that of the FPGA. Hence, when a non-final FPGA is placed in the square hole, the combination of the non-final FPGA and the board saver occupy no more area and thickness than would a final FPGA soldered directly into its designated position on the first-mentioned circuit board. The contact leads of a non-final FPGA are not bent and are soldered, at the top of the board saver, to the corresponding via holes. A non-final FPGA can readily be unsoldered from the board saver and replaced by another one. Once the final FPGA design has been determined, the board saver can be unsoldered from the contact pads on the first-mentioned printed-circuit board and replaced by the final FPGA.

A Timer for Synchronous Digital Systems

NASA Technical Reports Server (NTRS)

McKenney, Elizabeth; Irwin, Philip

2003-01-01

The Real-Time Interferometer Control Systems Testbed (RICST) timing board is a VersaModule Eurocard (VME)-based board that can generate up to 16 simultaneous, phase-locked timing signals at a rate defined by the user. It can also generate all seven VME interrupt requests (IRQs). The RICST timing board is suitable mainly for robotic, aerospace, and real-time applications. Several circuit boards on the market are capable of generating periodic IRQs. Most are associated with Global Positioning System (GPS) receivers and Inter Range Instrumentation Group (IRIG) time-code generators, whereas this board uses either an internal VME clock or an externally generated clock signal to synchronize multiple components of the system. The primary advantage of this board is that there is no discernible jitter in the output clock waveforms because the signals are divided down from a high-frequency clock signal instead of being phase-locked from a lower frequency. The primary disadvantage to this board, relative to other periodic-IRQ-generating boards, is that it is more difficult to synchronize the system to wall clock time.

A Study of the Impact of the Lack of a Cost Accounting Standards Board.

DTIC Science & Technology

1987-06-01

California 00 ,: SE P 9 7 THESIS SE& A STUDY OF THE IMPACT OF THE LACK OF A COST ACCOUNTING STANDARDS BOARD by James F. Sumner, III June 1987 Thesis...O’ATON COSA1. CODES 16 SuB,*CT j’J.45 Comr~nue n- p.ono ol neeeterV ani denltiy by flO(k f1LrmbCr) E,) ROUP StA IRucost accounting , cost accounting ...thesis has two purposes. First, it attempts to determine whether the absence of the Cost Accounting Standards Board (CASB) has given rise to any areas

Extreme ultraviolet patterned mask inspection performance of advanced projection electron microscope system for 11nm half-pitch generation

NASA Astrophysics Data System (ADS)

Hirano, Ryoichi; Iida, Susumu; Amano, Tsuyoshi; Watanabe, Hidehiro; Hatakeyama, Masahiro; Murakami, Takeshi; Suematsu, Kenichi; Terao, Kenji

2016-03-01

Novel projection electron microscope optics have been developed and integrated into a new inspection system named EBEYE-V30 ("Model EBEYE" is an EBARA's model code) , and the resulting system shows promise for application to half-pitch (hp) 16-nm node extreme ultraviolet lithography (EUVL) patterned mask inspection. To improve the system's inspection throughput for 11-nm hp generation defect detection, a new electron-sensitive area image sensor with a high-speed data processing unit, a bright and stable electron source, and an image capture area deflector that operates simultaneously with the mask scanning motion have been developed. A learning system has been used for the mask inspection tool to meet the requirements of hp 11-nm node EUV patterned mask inspection. Defects are identified by the projection electron microscope system using the "defectivity" from the characteristics of the acquired image. The learning system has been developed to reduce the labor and costs associated with adjustment of the detection capability to cope with newly-defined mask defects. We describe the integration of the developed elements into the inspection tool and the verification of the designed specification. We have also verified the effectiveness of the learning system, which shows enhanced detection capability for the hp 11-nm node.

Inspection design using 2D phased array, TFM and cueMAP software

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGilp, Ailidh; Dziewierz, Jerzy; Lardner, Tim

2014-02-18

A simulation suite, cueMAP, has been developed to facilitate the design of inspection processes and sparse 2D array configurations. At the core of cueMAP is a Total Focusing Method (TFM) imaging algorithm that enables computer assisted design of ultrasonic inspection scenarios, including the design of bespoke array configurations to match the inspection criteria. This in-house developed TFM code allows for interactive evaluation of image quality indicators of ultrasonic imaging performance when utilizing a 2D phased array working in FMC/TFM mode. The cueMAP software uses a series of TFM images to build a map of resolution, contrast and sensitivity of imagingmore » performance of a simulated reflector, swept across the inspection volume. The software takes into account probe properties, wedge or water standoff, and effects of specimen curvature. In the validation process of this new software package, two 2D arrays have been evaluated on 304n stainless steel samples, typical of the primary circuit in nuclear plants. Thick section samples have been inspected using a 1MHz 2D matrix array. Due to the processing efficiency of the software, the data collected from these array configurations has been used to investigate the influence sub-aperture operation on inspection performance.« less

77 FR 30292 - Corporation To Do Business Under Section 25A of the Federal Reserve Act

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-22

... Regulation K (12 CFR 211.4). The application below, as well as other related filings required by the Board... Federal Reserve Act (Edge Corporation) 12 U.S.C. Sec. 611 et seq., and all other applicable statutes and.... Frierson, Deputy Secretary of the Board. [FR Doc. 2012-12348 Filed 5-21-12; 8:45 am] BILLING CODE 6210-01-P ...

Board on Mathematical Sciences

DTIC Science & Technology

1990-02-20

20. DISTRIBUTION IAVAILAIIIY OF ABSTRACT 21. AISYRACr. SECURITY CLASSIFICATIO01 IDUNCLASSiFIEDAINumITE 0: SAME As RPT. C TIC USERS Unclassified 22a...RELEASE; DISTRIBUTION UNLIMITED t ’ C Availability Codes Avail and I or Specmial 90 04 09 118 BOARD ON MATHEMATICAL SCIENCES BACKGROUND The National...television film, "The Man Who Loved Numbers," based on the life of the Indian mathematician Srinivasa Ramanujan at the National Academy of Sciences (NAS

Programmable Pulse-Position-Modulation Encoder

NASA Technical Reports Server (NTRS)

Zhu, David; Farr, William

2006-01-01

A programmable pulse-position-modulation (PPM) encoder has been designed for use in testing an optical communication link. The encoder includes a programmable state machine and an electronic code book that can be updated to accommodate different PPM coding schemes. The encoder includes a field-programmable gate array (FPGA) that is programmed to step through the stored state machine and code book and that drives a custom high-speed serializer circuit board that is capable of generating subnanosecond pulses. The stored state machine and code book can be updated by means of a simple text interface through the serial port of a personal computer.

A Thematic Analysis of Online Discussion Boards for Brachial Plexus Injury.

PubMed

Morris, Marie T; Daluiski, Aaron; Dy, Christopher J

2016-08-01

Patients with brachial plexus injury (BPI) and their family members contribute to Internet discussion groups dedicated to BPI. We hypothesized that a thematic analysis of posts from BPI Internet discussion groups would reveal common themes related to the BPI patient experience, providing topics for patient education and counseling. Internet discussion boards were identified using the search term "brachial plexus injury support group" in Google, Bing, and Yahoo! search engines. Two discussion boards had substantially more posts than other Web sites and were chosen for analyses. Posts from January 1, 2015, through January 1, 2016, were examined. Using an iterative and established process, 2 investigators (M.T.M. and C.J.D) independently analyzed each post using thematic analysis in 3 steps (open coding, axial coding, and selective coding) to determine common themes. In this process, each post was reviewed 3 times. A total of 328 posts from the 2 leading discussion boards were analyzed. Investigators reached a consensus on themes for all posts. One central theme focused on emotional aspects of BPI. Four other central themes regarding information support were identified: BPI disease, BPI treatment, recovery after BPI treatment, and process of seeking care for BPI. Examination of posts on Internet support groups for BPI revealed recurring concerns, questions, and opinions of patients and their family members. The most common themes related to disease information, treatment, recovery, and the emotional element of BPI. These findings provide a helpful starting point in refining topics for patient education and support that are targeted on patients' interests and concerns. Copyright © 2016 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Understanding the Relationships Between Inspection Results and Risk of Foodborne Illness in Restaurants.

PubMed

Lee, Petrona; Hedberg, Craig W

2016-10-01

Restaurants are important settings for foodborne disease outbreaks and consumers are increasingly using restaurant inspection results to guide decisions about where to eat. Although public posting of inspection results may lead to improved sanitary practices in the restaurant, the relationship between inspection results and risk of foodborne illness appears to be pathogen specific. To further examine the relationship between inspection results and the risk of foodborne disease outbreaks, we evaluated results of routine inspections conducted in multiple restaurants in a chain (Chain A) that was associated with a large Salmonella outbreak in Illinois. Inspection results were collected from 106 Chain A establishments in eight counties. Forty-six outbreak-associated cases were linked to 23 of these Chain A restaurants. There were no significant differences between the outbreak and nonoutbreak restaurants for overall demerit points or for the number of demerit points attributed to hand washing or cross-contamination. Our analyses strongly suggest that the outbreak resulted from consumption of a contaminated fresh produce item without further amplification within individual restaurants. Inspections at these facilities would be unlikely to detect or predict the foodborne illness outbreak because there are no Food Code items in place to stop the introduction of contaminated food from an otherwise approved commercial food source. The results of our study suggest that the agent and food item pairing and route of transmission must be taken into consideration to improve our understanding of the relationship between inspection results and the risk of foodborne illness in restaurants.

40 CFR Appendix Xiii to Part 86 - State Requirements Incorporated by Reference in Part 86 of the Code of Federal Regulations

Code of Federal Regulations, 2010 CFR

2010-07-01

... Specifications, adopted March 1, 1978, amended June 24, 1996, excluding paragraphs 2(b), 3.5, and 10. [62 FR... Vehicles, adopted November 24, 1981, amended June 24, 1996. (b) State of California; Air Resources Board... and Medium-Duty Vehicles, adopted June 24, 1996. (c) California Code of Regulations, Title 13...

Hermeneutic and Cultural Codes of S/Z: A Semiological Reading of James Joyce's "The Boarding House"

ERIC Educational Resources Information Center

Booryazadeh, Seyed Ali; Faghfori, Sohila; Shamsi, Habibe

2014-01-01

Roland Barthes as a fervent proponent of semiology believes that semiology is a branch of a comprehensive linguistics: it is the study of how language articulates the world. Semiotic codes, the paths of this articulation, accordingly underlie his attention. Barthes in a structural analysis of Balzac's "Sarrasine" in S/Z expounds five…

3D laser scanning for quality control and assurance in bridge deck construction.

DOT National Transportation Integrated Search

2014-08-01

The inspection of installations of rebar and other embedded components in bridge deck construction is a tedious : task for eld inspectors, requiring considerable eld time for measurement and verication against code requirement. The verica...

Investigating the potential benefits of on-site food safety training for Folklorama, a temporary food service event.

PubMed

Mancini, Roberto; Murray, Leigh; Chapman, Benjamin J; Powell, Douglas A

2012-10-01

Folklorama in Winnipeg, Manitoba, Canada, is a 14-day temporary food service event that explores the many different cultural realms of food, food preparation, and entertainment. In 2010, the Russian pavilion at Folklorama was implicated in a foodborne outbreak of Escherichia coli O157 that caused 37 illnesses and 18 hospitalizations. The ethnic nature and diversity of foods prepared within each pavilion presents a unique problem for food inspectors, as each culture prepares food in their own very unique way. The Manitoba Department of Health and Folklorama Board of Directors realized a need to implement a food safety information delivery program that would be more effective than a 2-h food safety course delivered via PowerPoint slides. The food operators and event coordinators of five randomly chosen pavilions selling potentially hazardous food were trained on-site, in their work environment, focusing on critical control points specific to their menu. A control group (five pavilions) did not receive on-site food safety training and were assessed concurrently. Public health inspections for all 10 pavilions were performed by Certified Public Health Inspectors employed with Manitoba Health. Critical infractions were assessed by means of standardized food protection inspection reports. The results suggest no statistically significant difference in food inspection scores between the trained and control groups. However, it was found that inspection report results increased for both the control and trained groups from the first inspection to the second, implying that public health inspections are necessary in correcting unsafe food safety practices. The results further show that in this case, the 2-h food safety course delivered via slides was sufficient to pass public health inspections. Further evaluations of alternative food safety training approaches are warranted.

49 CFR 176.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., spillage, or other accident. INF cargo means packaged irradiated nuclear fuel, plutonium or high-level... Irradiated Nuclear Fuel, Plutonium and High-Level Radioactive Wastes on Board Ships” (INF Code) contained in...

Pulse Code Modulation (PCM) data storage and analysis using a microcomputer

NASA Technical Reports Server (NTRS)

Massey, D. E.

1986-01-01

The current widespread use of microcomputers has led to the creation of some very low-cost instrumentation. A Pulse Code Modulation (PCM) storage device/data analyzer -- a peripheral plug-in board especially constructed to enable a personal computer to store and analyze data from a PCM source -- was designed and built for use on the NASA Sounding Rocket Program for PMC encoder configuration and testing. This board and custom-written software turns a computer into a snapshot PCM decommutator which will accept and store many hundreds or thousands of PCM telemetry data frames, then sift through them repeatedly. These data can be converted to any number base and displayed, examined for any bit dropouts or changes (in particular, words or frames), graphically plotted, or statistically analyzed.

On-board data management study for EOPAP

NASA Technical Reports Server (NTRS)

Davisson, L. D.

1975-01-01

The requirements, implementation techniques, and mission analysis associated with on-board data management for EOPAP were studied. SEASAT-A was used as a baseline, and the storage requirements, data rates, and information extraction requirements were investigated for each of the following proposed SEASAT sensors: a short pulse 13.9 GHz radar, a long pulse 13.9 GHz radar, a synthetic aperture radar, a multispectral passive microwave radiometer facility, and an infrared/visible very high resolution radiometer (VHRR). Rate distortion theory was applied to determine theoretical minimum data rates and compared with the rates required by practical techniques. It was concluded that practical techniques can be used which approach the theoretically optimum based upon an empirically determined source random process model. The results of the preceding investigations were used to recommend an on-board data management system for (1) data compression through information extraction, optimal noiseless coding, source coding with distortion, data buffering, and data selection under command or as a function of data activity, (2) for command handling, (3) for spacecraft operation and control, and (4) for experiment operation and monitoring.

Comparison of cosmic rays radiation detectors on-board commercial jet aircraft.

PubMed

Kubančák, Ján; Ambrožová, Iva; Brabcová, Kateřina Pachnerová; Jakůbek, Jan; Kyselová, Dagmar; Ploc, Ondřej; Bemš, Július; Štěpán, Václav; Uchihori, Yukio

2015-06-01

Aircrew members and passengers are exposed to increased rates of cosmic radiation on-board commercial jet aircraft. The annual effective doses of crew members often exceed limits for public, thus it is recommended to monitor them. In general, the doses are estimated via various computer codes and in some countries also verified by measurements. This paper describes a comparison of three cosmic rays detectors, namely of the (a) HAWK Tissue Equivalent Proportional Counter; (b) Liulin semiconductor energy deposit spectrometer and (c) TIMEPIX silicon semiconductor pixel detector, exposed to radiation fields on-board commercial Czech Airlines company jet aircraft. Measurements were performed during passenger flights from Prague to Madrid, Oslo, Tbilisi, Yekaterinburg and Almaty, and back in July and August 2011. For all flights, energy deposit spectra and absorbed doses are presented. Measured absorbed dose and dose equivalent are compared with the EPCARD code calculations. Finally, the advantages and disadvantages of all detectors are discussed. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Implementation of Online Veterinary Hospital on Cloud Platform.

PubMed

Chen, Tzer-Shyong; Chen, Tzer-Long; Chung, Yu-Fang; Huang, Yao-Min; Chen, Tao-Chieh; Wang, Huihui; Wei, Wei

2016-06-01

Pet markets involve in great commercial possibilities, which boost thriving development of veterinary hospital businesses. The service tends to intensive competition and diversified channel environment. Information technology is integrated for developing the veterinary hospital cloud service platform. The platform contains not only pet medical services but veterinary hospital management and services. In the study, QR Code andcloud technology are applied to establish the veterinary hospital cloud service platform for pet search by labeling a pet's identification with QR Code. This technology can break the restriction on veterinary hospital inspection in different areas and allows veterinary hospitals receiving the medical records and information through the exclusive QR Code for more effective inspection. As an interactive platform, the veterinary hospital cloud service platform allows pet owners gaining the knowledge of pet diseases and healthcare. Moreover, pet owners can enquire and communicate with veterinarians through the platform. Also, veterinary hospitals can periodically send reminders of relevant points and introduce exclusive marketing information with the platform for promoting the service items and establishing individualized marketing. Consequently, veterinary hospitals can increase the profits by information share and create the best solution in such a competitive veterinary market with industry alliance.

77 FR 74482 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-14

... Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or bank... the Act (12 U.S.C. 1817(j)(7)). The notices are available for immediate inspection at the Federal...

Vision Technology for Automated Inspection of Hybrid Microelectronics Assemblies

DTIC Science & Technology

1988-06-01

circuits are a very efficient packaging technique, with the primary advantages of size, better resistance to environ - 0 ments, and the flexibility to...produced for the military are much more complex and have more stringent performance requirements, particularly in their resistance to environments and...boards, particularly because of the need to protect circuits from a hostile environment such as salt, heat, and moisture. Included among the major U.S

Heterogeneous VM Replication: A New Approach to Intrusion Detection, Active Response and Recovery in Cloud Data Centers

DTIC Science & Technology

2015-08-17

from the same execution history, and cost-effective active response by proactively setting up standby VM replicas: migration from a compromised VM...the guest OSes system call code to be reused inside a “shadowed” portion of the context of the out-of- guest inspection program. Besides...by the rootkits in cloud environments. RootkitDet detects rootkits by identifying suspicious code region in the kernel space of guest OSes through

Woodmetrics: imaging devices and processes in wood inspection at Lulea University of Technology

NASA Astrophysics Data System (ADS)

Hagman, Olle

1999-09-01

Wood Technology research and education at Lulea University of Technology is located in Skelleftea 800 km north of Stockholm. At the campus about 25 persons are involved in education and research in Wood Technology. We are educating M.Sc. and post- graduate students in Wood Technology. The research at the campus includes the following main fields: -- Wood Machining - - Woodmetrics -- Wood Drying -- Wood Composites/Wood Material Science. Our research strategy is to obtain an individual treatment of every tree, board and piece of wood in order to get highest possible value for the forest products. This shall be accomplished by the aid of advanced scanning technology and computer technology. Woodmetrics means to measure different wood parameters in order to optimize the utilization of the raw material. Today we have the following projects in this field: Automatic wood inspection -- Color changes and moisture flow in drying processes -- Inner quality of logs and lumber - - Stem quality database -- Computer tomography -- Aesthetic properties of wood -- Market/industry/forest relations. In the Woodmetrics field we are using computer tomography, CCD cameras and other sensors in order to find and measure defects in trees and on boards. The signals are analyzed and classified with modern image analyzing techniques and advanced statistical methods.

Reliability of high I/O high density CCGA interconnect electronic packages under extreme thermal environments

NASA Astrophysics Data System (ADS)

Ramesham, Rajeshuni

2012-03-01

Ceramic column grid array (CCGA) packages have been increasing in use based on their advantages such as high interconnect density, very good thermal and electrical performances, compatibility with standard surfacemount packaging assembly processes, and so on. CCGA packages are used in space applications such as in logic and microprocessor functions, telecommunications, payload electronics, and flight avionics. As these packages tend to have less solder joint strain relief than leaded packages or more strain relief over lead-less chip carrier packages, the reliability of CCGA packages is very important for short-term and long-term deep space missions. We have employed high density CCGA 1152 and 1272 daisy chained electronic packages in this preliminary reliability study. Each package is divided into several daisy-chained sections. The physical dimensions of CCGA1152 package is 35 mm x 35 mm with a 34 x 34 array of columns with a 1 mm pitch. The dimension of the CCGA1272 package is 37.5 mm x 37.5 mm with a 36 x 36 array with a 1 mm pitch. The columns are made up of 80% Pb/20%Sn material. CCGA interconnect electronic package printed wiring polyimide boards have been assembled and inspected using non-destructive x-ray imaging techniques. The assembled CCGA boards were subjected to extreme temperature thermal atmospheric cycling to assess their reliability for future deep space missions. The resistance of daisy-chained interconnect sections were monitored continuously during thermal cycling. This paper provides the experimental test results of advanced CCGA packages tested in extreme temperature thermal environments. Standard optical inspection and x-ray non-destructive inspection tools were used to assess the reliability of high density CCGA packages for deep space extreme temperature missions.

21 CFR 177.2400 - Perfluorocarbon cured elastomers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... as are provided: Substances Limitations Carbon black (channel process of furnace combustion process... Park, MD 20740, or available for inspection at the National Archives and Records Administration (NARA....archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. (2) Thermogravimetry...

78 FR 37505 - International Standard-Setting Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-21

... Code of Practice for Weed Control to Prevent and Reduce Pyrrolizidine Alkaloid Contamination in Food... DEPARTMENT OF AGRICULTURE Food Safety and Inspection Service [Docket No. FSIS-2013-0002] International Standard-Setting Activities AGENCY: Office of Food Safety, USDA. ACTION: Notice. SUMMARY: This...

Reliability of CGA/LGA/HDI Package Board/Assembly (Revision A)

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2013-01-01

This follow-up report presents reliability test results conducted by thermal cycling of five CGA assemblies evaluated under two extreme cycle profiles, representative of use for high-reliability applications. The thermal cycles ranged from a low temperature of 55 C to maximum temperatures of either 100 C or 125 C with slow ramp-up rate (3 C/min) and dwell times of about 15 minutes at the two extremes. Optical photomicrographs that illustrate key inspection findings of up to 200 thermal cycles are presented. Other information presented include an evaluation of the integrity of capacitors on CGA substrate after thermal cycling as well as process evaluation for direct assembly of an LGA onto PCB. The qualification guidelines, which are based on the test results for CGA/LGA/HDI packages and board assemblies, will facilitate NASA projects' use of very dense and newly available FPGA area array packages with known reliably and mitigation risks, allowing greater processing power in a smaller board footprint and lower system weight.

25 CFR 175.23 - Customer responsibilities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... National Electrical Code of the National Board of Fire Underwriters for Electric Wiring and Apparatus as they apply to the installation and operation of customer-owned equipment; (b) Be responsible for...

Development of an extensible dual-core wireless sensing node for cyber-physical systems

NASA Astrophysics Data System (ADS)

Kane, Michael; Zhu, Dapeng; Hirose, Mitsuhito; Dong, Xinjun; Winter, Benjamin; Häckell, Mortiz; Lynch, Jerome P.; Wang, Yang; Swartz, A.

2014-04-01

The introduction of wireless telemetry into the design of monitoring and control systems has been shown to reduce system costs while simplifying installations. To date, wireless nodes proposed for sensing and actuation in cyberphysical systems have been designed using microcontrollers with one computational pipeline (i.e., single-core microcontrollers). While concurrent code execution can be implemented on single-core microcontrollers, concurrency is emulated by splitting the pipeline's resources to support multiple threads of code execution. For many applications, this approach to multi-threading is acceptable in terms of speed and function. However, some applications such as feedback controls demand deterministic timing of code execution and maximum computational throughput. For these applications, the adoption of multi-core processor architectures represents one effective solution. Multi-core microcontrollers have multiple computational pipelines that can execute embedded code in parallel and can be interrupted independent of one another. In this study, a new wireless platform named Martlet is introduced with a dual-core microcontroller adopted in its design. The dual-core microcontroller design allows Martlet to dedicate one core to standard wireless sensor operations while the other core is reserved for embedded data processing and real-time feedback control law execution. Another distinct feature of Martlet is a standardized hardware interface that allows specialized daughter boards (termed wing boards) to be interfaced to the Martlet baseboard. This extensibility opens opportunity to encapsulate specialized sensing and actuation functions in a wing board without altering the design of Martlet. In addition to describing the design of Martlet, a few example wings are detailed, along with experiments showing the Martlet's ability to monitor and control physical systems such as wind turbines and buildings.

Analyzing Pulse-Code Modulation On A Small Computer

NASA Technical Reports Server (NTRS)

Massey, David E.

1988-01-01

System for analysis pulse-code modulation (PCM) comprises personal computer, computer program, and peripheral interface adapter on circuit board that plugs into expansion bus of computer. Functions essentially as "snapshot" PCM decommutator, which accepts and stores thousands of frames of PCM data, sifts through them repeatedly to process according to routines specified by operator. Enables faster testing and involves less equipment than older testing systems.

QR Codes as Mobile Learning Tools for Labor Room Nurses at the San Pablo Colleges Medical Center

ERIC Educational Resources Information Center

Del Rosario-Raymundo, Maria Rowena

2017-01-01

Purpose: The purpose of this paper is to explore the use of QR codes as mobile learning tools and examine factors that impact on their usefulness, acceptability and feasibility in assisting the nurses' learning. Design/Methodology/Approach: Study participants consisted of 14 regular, full-time, board-certified LR nurses. Over a two-week period,…

The Ethical Dimensions of Working with Parents: Using the Code of Ethics when Faced with a Difficult Decision

ERIC Educational Resources Information Center

Freeman, Nancy K.; Swick, Kevin J.

2007-01-01

In 2000 ACEI began an exploration of the potential role that a code of professional ethics might have in the Association. The Public Affairs Committee recommended that the Executive Board appoint an ad hoc Ethics Committee. That committee, under the leadership of Nita Barbour, accepted its charge to provide guidance to colleagues who struggle to…

Large-scale transmission-type multifunctional anisotropic coding metasurfaces in millimeter-wave frequencies

NASA Astrophysics Data System (ADS)

Cui, Tie Jun; Wu, Rui Yuan; Wu, Wei; Shi, Chuan Bo; Li, Yun Bo

2017-10-01

We propose fast and accurate designs to large-scale and low-profile transmission-type anisotropic coding metasurfaces with multiple functions in the millimeter-wave frequencies based on the antenna-array method. The numerical simulation of an anisotropic coding metasurface with the size of 30λ × 30λ by the proposed method takes only 20 min, which however cannot be realized by commercial software due to huge memory usage in personal computers. To inspect the performance of coding metasurfaces in the millimeter-wave band, the working frequency is chosen as 60 GHz. Based on the convolution operations and holographic theory, the proposed multifunctional anisotropic coding metasurface exhibits different effects excited by y-polarized and x-polarized incidences. This study extends the frequency range of coding metasurfaces, filling the gap between microwave and terahertz bands, and implying promising applications in millimeter-wave communication and imaging.

Automated visual inspection system based on HAVNET architecture

NASA Astrophysics Data System (ADS)

Burkett, K.; Ozbayoglu, Murat A.; Dagli, Cihan H.

1994-10-01

In this study, the HAusdorff-Voronoi NETwork (HAVNET) developed at the UMR Smart Engineering Systems Lab is tested in the recognition of mounted circuit components commonly used in printed circuit board assembly systems. The automated visual inspection system used consists of a CCD camera, a neural network based image processing software and a data acquisition card connected to a PC. The experiments are run in the Smart Engineering Systems Lab in the Engineering Management Dept. of the University of Missouri-Rolla. The performance analysis shows that the vision system is capable of recognizing different components under uncontrolled lighting conditions without being effected by rotation or scale differences. The results obtained are promising and the system can be used in real manufacturing environments. Currently the system is being customized for a specific manufacturing application.

Radiography simulation on single-shot dual-spectrum X-ray for cargo inspection system.

PubMed

Gil, Youngmi; Oh, Youngdo; Cho, Moohyun; Namkung, Won

2011-02-01

We propose a method to identify materials in the dual energy X-ray (DeX) inspection system. This method identifies materials by combining information on the relative proportions T of high-energy and low-energy X-rays transmitted through the material, and the ratio R of the attenuation coefficient of the material when high-energy are used to that when low energy X-rays are used. In Monte Carlo N-Particle Transport Code (MCNPX) simulations using the same geometry as that of the real container inspection system, this T vs. R method successfully identified tissue-equivalent plastic and several metals. In further simulations, the single-shot mode of operating the accelerator led to better distinguishing of materials than the dual-shot system. Copyright © 2010 Elsevier Ltd. All rights reserved.

Type A Accident Investigation Board report on the January 17, 1996, electrical accident with injury in Technical Area 21 Tritium Science and Fabrication Facility Los Alamos National Laboratory. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-04-01

An electrical accident was investigated in which a crafts person received serious injuries as a result of coming into contact with a 13.2 kilovolt (kV) electrical cable in the basement of Building 209 in Technical Area 21 (TA-21-209) in the Tritium Science and Fabrication Facility (TSFF) at Los Alamos National Laboratory (LANL). In conducting its investigation, the Accident Investigation Board used various analytical techniques, including events and causal factor analysis, barrier analysis, change analysis, fault tree analysis, materials analysis, and root cause analysis. The board inspected the accident site, reviewed events surrounding the accident, conducted extensive interviews and document reviews,more » and performed causation analyses to determine the factors that contributed to the accident, including any management system deficiencies. Relevant management systems and factors that could have contributed to the accident were evaluated in accordance with the guiding principles of safety management identified by the Secretary of Energy in an October 1994 letter to the Defense Nuclear Facilities Safety Board and subsequently to Congress.« less

A review of nondestructive examination technology for polyethylene pipe in nuclear power plant

NASA Astrophysics Data System (ADS)

Zheng, Jinyang; Zhang, Yue; Hou, Dongsheng; Qin, Yinkang; Guo, Weican; Zhang, Chuck; Shi, Jianfeng

2018-05-01

Polyethylene (PE) pipe, particularly high-density polyethylene (HDPE) pipe, has been successfully utilized to transport cooling water for both non-safety- and safety-related applications in nuclear power plant (NPP). Though ASME Code Case N755, which is the first code case related to NPP HDPE pipe, requires a thorough nondestructive examination (NDE) of HDPE joints. However, no executable regulations presently exist because of the lack of a feasible NDE technique for HDPE pipe in NPP. This work presents a review of current developments in NDE technology for both HDPE pipe in NPP with a diameter of less than 400 mm and that of a larger size. For the former category, phased array ultrasonic technique is proven effective for inspecting typical defects in HDPE pipe, and is thus used in Chinese national standards GB/T 29460 and GB/T 29461. A defect-recognition technique is developed based on pattern recognition, and a safety assessment principle is summarized from the database of destructive testing. On the other hand, recent research and practical studies reveal that in current ultrasonic-inspection technology, the absence of effective ultrasonic inspection for large size was lack of consideration of the viscoelasticity effect of PE on acoustic wave propagation in current ultrasonic inspection technology. Furthermore, main technical problems were analyzed in the paper to achieve an effective ultrasonic test method in accordance to the safety and efficiency requirements of related regulations and standards. Finally, the development trend and challenges of NDE test technology for HDPE in NPP are discussed.

Surveillance of Washington OSHA exposure data to identify uncharacterized or emerging occupational health hazards.

PubMed

Lofgren, Don J; Reeb-Whitaker, Carolyn K; Adams, Darrin

2010-07-01

Chemical substance exposure data from the Washington State Occupational Safety and Health Administration (OSHA) program were reviewed to determine if inspections conducted as a result of a report of a hazard from a complainant or referent may alert the agency to uncharacterized or emerging health hazards. Exposure and other electronically stored data from 6890 health inspection reports conducted between April 2003 and August 2008 were extracted from agency records. A total of 515 (7%) inspections with one or more personal airborne chemical substance samples were identified for further study. Inspections by report of a hazard and by targeting were compared for the following: number of inspections, number and percentage of inspections with workers exposed to substances above an agency's permissible exposure limit, types of industries inspected, and number and type of chemical substances assessed. Report of a hazard inspections documented work sites with worker overexposure at the same rate as agency targeted inspections (approximately 35% of the time), suggesting that complainants and referents are a credible pool of observers capable of directing the agency to airborne chemical substance hazards. Report of a hazard inspections were associated with significantly broader distribution of industries as well as a greater variety of chemical substance exposures than were targeted inspections. Narrative text that described business type and processes inspected was more useful than NAICS codes alone and critical in identifying processes and industries that may be associated with new hazards. Finally, previously identified emerging hazards were found among the report of a hazard data. These findings indicate that surveillance of OSHA inspection data can be a valid tool to identify uncharacterized and emerging health hazards. Additional research is needed to develop criteria for objective review and prioritization of the data for intervention. Federal OSHA and other state OSHA agencies will need to add electronic data entry fields more descriptive of industry, process, and substance to fully use agency exposure data for hazard surveillance.

DSP code optimization based on cache

NASA Astrophysics Data System (ADS)

Xu, Chengfa; Li, Chengcheng; Tang, Bin

2013-03-01

DSP program's running efficiency on board is often lower than which via the software simulation during the program development, which is mainly resulted from the user's improper use and incomplete understanding of the cache-based memory. This paper took the TI TMS320C6455 DSP as an example, analyzed its two-level internal cache, and summarized the methods of code optimization. Processor can achieve its best performance when using these code optimization methods. At last, a specific algorithm application in radar signal processing is proposed. Experiment result shows that these optimization are efficient.

7 CFR 42.113 - Defects of label, marking, or code; Table VIII.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Section 42.113 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS STANDARDS FOR CONDITION OF FOOD CONTAINERS Procedures for Stationary Lot Sampling and...

48 CFR 1846.672-1 - Preparation instructions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION CONTRACT MANAGEMENT QUALITY ASSURANCE Material Inspection and Receiving Reports 1846.672-1.../OF. Consecutively number the pages comprising the MIRR. On each page, enter the total number of pages... of the item nomenclature and, if provided, the Government-assigned management/material control code...

7 CFR 51.1823 - Mature.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Mature. 51.1823 Section 51.1823 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Mature. Mature shall have the same meaning assigned the term in the Florida Citrus Code, Chapter 601...

7 CFR 51.767 - Mature.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Mature. 51.767 Section 51.767 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Mature. Mature shall have the same meaning assigned the term in the Florida Citrus Code, Chapter 601...

7 CFR 51.1823 - Mature.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Mature. 51.1823 Section 51.1823 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Mature. Mature shall have the same meaning assigned the term in the Florida Citrus Code, Chapter 601...

7 CFR 51.767 - Mature.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Mature. 51.767 Section 51.767 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Mature. Mature shall have the same meaning assigned the term in the Florida Citrus Code, Chapter 601...

77 FR 36984 - International Standard-Setting Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-20

... to Reduce Contamination of Food with Chemicals. Revised definition of Contaminant. To be considered... Code of Practice for Weed Control to Prevent and Reduce Pyrolizidine Alkaloid Contamination in Food and... DEPARTMENT OF AGRICULTURE Food Safety and Inspection Service [Docket No. FSIS-2012-0017...

The IAEA neutron coincidence counting (INCC) and the DEMING least-squares fitting programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krick, M.S.; Harker, W.C.; Rinard, P.M.

1998-12-01

Two computer programs are described: (1) the INCC (IAEA or International Neutron Coincidence Counting) program and (2) the DEMING curve-fitting program. The INCC program is an IAEA version of the Los Alamos NCC (Neutron Coincidence Counting) code. The DEMING program is an upgrade of earlier Windows{reg_sign} and DOS codes with the same name. The versions described are INCC 3.00 and DEMING 1.11. The INCC and DEMING codes provide inspectors with the software support needed to perform calibration and verification measurements with all of the neutron coincidence counting systems used in IAEA inspections for the nondestructive assay of plutonium and uranium.

Surveys of ISS Returned Hardware for MMOD Impacts

NASA Technical Reports Server (NTRS)

Hyde, James; Christiansen, E.; Lear, D.; Nagy, K.

2017-01-01

Since February 2001, the Hypervelocity Impact Technology (HVIT) group at the Johnson Space Center in Houston has performed 26 post-flight inspections on space exposed hardware that have been returned from the International Space Station. Data on 1,024 observations of MMOD damage have been collected from these inspections. Survey documentation typically includes impact feature location and size measurements as well as microscopic photography (25-200x). Sampling of impacts sites for projectile residue was performed for the largest features. Results of Scanning Electron Microscopy (SEM) analysis to discern impactor source is included in the database. This paper will summarize the post-flight MMOD inspections, and focus on two inspections in particular: (1) Pressurized Mating Adapter-2 (PMA-2) cover returned in 2015 after 1.6 years exposure with 26 observed damages, and (2) Airlock shield panels returned in 2010 after 8.7 years exposure with 58 MMOD damages. Feature sizes from the observed data are compared to predictions using the Bumper risk assessment code.

Application of golay complementary coded excitation schemes for non-destructive testing of sandwich structures

NASA Astrophysics Data System (ADS)

Arora, Vanita; Mulaveesala, Ravibabu

2017-06-01

In recent years, InfraRed Thermography (IRT) has become a widely accepted non-destructive testing technique to evaluate the structural integrity of composite sandwich structures due to its full-field, remote, fast and in-service inspection capabilities. This paper presents a novel infrared thermographic approach named as Golay complementary coded thermal wave imaging is presented to detect disbonds in a sandwich structure having face sheets from Glass/Carbon Fibre Reinforced (GFR/CFR) laminates and core of the wooden block.

In-camera video-stream processing for bandwidth reduction in web inspection

NASA Astrophysics Data System (ADS)

Jullien, Graham A.; Li, QiuPing; Hajimowlana, S. Hossain; Morvay, J.; Conflitti, D.; Roberts, James W.; Doody, Brian C.

1996-02-01

Automated machine vision systems are now widely used for industrial inspection tasks where video-stream data information is taken in by the camera and then sent out to the inspection system for future processing. In this paper we describe a prototype system for on-line programming of arbitrary real-time video data stream bandwidth reduction algorithms; the output of the camera only contains information that has to be further processed by a host computer. The processing system is built into a DALSA CCD camera and uses a microcontroller interface to download bit-stream data to a XILINXTM FPGA. The FPGA is directly connected to the video data-stream and outputs data to a low bandwidth output bus. The camera communicates to a host computer via an RS-232 link to the microcontroller. Static memory is used to both generate a FIFO interface for buffering defect burst data, and for off-line examination of defect detection data. In addition to providing arbitrary FPGA architectures, the internal program of the microcontroller can also be changed via the host computer and a ROM monitor. This paper describes a prototype system board, mounted inside a DALSA camera, and discusses some of the algorithms currently being implemented for web inspection applications.

Multi-Modulator for Bandwidth-Efficient Communication

NASA Technical Reports Server (NTRS)

Gray, Andrew; Lee, Dennis; Lay, Norman; Cheetham, Craig; Fong, Wai; Yeh, Pen-Shu; King, Robin; Ghuman, Parminder; Hoy, Scott; Fisher, Dave

2009-01-01

A modulator circuit board has recently been developed to be used in conjunction with a vector modulator to generate any of a large number of modulations for bandwidth-efficient radio transmission of digital data signals at rates than can exceed 100 Mb/s. The modulations include quadrature phaseshift keying (QPSK), offset quadrature phase-shift keying (OQPSK), Gaussian minimum-shift keying (GMSK), and octonary phase-shift keying (8PSK) with square-root raised-cosine pulse shaping. The figure is a greatly simplified block diagram showing the relationship between the modulator board and the rest of the transmitter. The role of the modulator board is to encode the incoming data stream and to shape the resulting pulses, which are fed as inputs to the vector modulator. The combination of encoding and pulse shaping in a given application is chosen to maximize the bandwidth efficiency. The modulator board includes gallium arsenide serial-to-parallel converters at its input end. A complementary metal oxide/semiconductor (CMOS) field-programmable gate array (FPGA) performs the coding and modulation computations and utilizes parallel processing in doing so. The results of the parallel computation are combined and converted to pulse waveforms by use of gallium arsenide parallel-to-serial converters integrated with digital-to-analog converters. Without changing the hardware, one can configure the modulator to produce any of the designed combinations of coding and modulation by loading the appropriate bit configuration file into the FPGA.

Plug and Play PV Systems for American Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoepfner, Christian

2016-12-22

The core objectives of the Plug & Play PV Systems Project were to develop a PV system that can be installed on a residential rooftop for less than $1.50/W in 2020, and in less than 10 hours (from point of purchase to commissioning). The Fraunhofer CSE team’s approach to this challenge involved a holistic approach to system design – hardware and software – that make Plug & Play PV systems: • Quick, easy, and safe to install • Easy to demonstrate as code compliant • Permitted, inspected, and interconnected via an electronic process Throughout the three years of work duringmore » this Department of Energy SunShot funded project, the team engaged in a substantive way with inspectional services departments and utilities, manufacturers, installers, and distributors. We received iterative feedback on the system design and on ideas for how such systems can be commercialized. This ultimately led us to conceiving of Plug & Play PV Systems as a framework, with a variety of components compatible with the Plug & Play PV approach, including string or microinverters, conventional modules or emerging lightweight modules. The framework enables a broad group of manufacturers to participate in taking Plug & Play PV Systems to market, and increases the market size for such systems. Key aspects of the development effort centered on the system hardware and associated engineering work, the development of a Plug & Play PV Server to enable the electronic permitting, inspection and interconnection process, understanding the details of code compliance and, on occasion, supporting applications for modifications to the code to allow lightweight modules, for example. We have published a number of papers on our testing and assessment of novel technologies (e.g., adhered lightweight modules) and on the electronic architecture.« less