Discrete transparent boundary conditions for the mixed KDV-BBM equation

NASA Astrophysics Data System (ADS)

Besse, Christophe; Noble, Pascal; Sanchez, David

2017-09-01

In this paper, we consider artificial boundary conditions for the linearized mixed Korteweg-de Vries (KDV) and Benjamin-Bona-Mahoney (BBM) equation which models water waves in the small amplitude, large wavelength regime. Continuous (respectively discrete) artificial boundary conditions involve non local operators in time which in turn requires to compute time convolutions and invert the Laplace transform of an analytic function (respectively the Z-transform of an holomorphic function). In this paper, we propose a new, stable and fairly general strategy to carry out this crucial step in the design of transparent boundary conditions. For large time simulations, we also introduce a methodology based on the asymptotic expansion of coefficients involved in exact direct transparent boundary conditions. We illustrate the accuracy of our methods for Gaussian and wave packets initial data.

A Bayesian Beta-Mixture Model for Nonparametric IRT (BBM-IRT)

ERIC Educational Resources Information Center

Arenson, Ethan A.; Karabatsos, George

2017-01-01

Item response models typically assume that the item characteristic (step) curves follow a logistic or normal cumulative distribution function, which are strictly monotone functions of person test ability. Such assumptions can be overly-restrictive for real item response data. We propose a simple and more flexible Bayesian nonparametric IRT model…

Ultrasound shear wave elastography in the assessment of passive biceps brachii muscle stiffness: influences of sex and elbow position.

PubMed

Chen, Johnson; O'Dell, Michael; He, Wen; Du, Li-Juan; Li, Pai-Chi; Gao, Jing

To assess differences in biceps brachii muscle (BBM) stiffness as evaluated by ultrasound shear wave elastography (SWE). The passive stiffness of the BBM was quantified with shear wave velocity (SWV) measurements obtained from 10 healthy volunteers (5 men and 5 women, mean age 50years, age range 42-63 years) with the elbow at full extension and 30° flexion in this IRB-approved study. Potential differences between two depths within the muscle, two elbow positions, the two arms, and sexes were assessed by using two-tailed t-test. The reproducibility of SWV measurements was tested by using intraclass correlation coefficient (ICC). Significantly higher passive BBM stiffness was found at full elbow extension compared to 30° of flexion (p≤0.00006 for both arms). Significantly higher passive stiffness in women was seen for the right arm (p=0.04 for both elbow positions). Good correlation of shear wave velocity measured at the different depths. The ICC for interobserver and intraobserver variation was high. SWE is a reliable quantitative tool for assessing BBM stiffness, with differences in stiffness based on elbow position demonstrated and based on sex suggested. Copyright © 2017 Elsevier Inc. All rights reserved.

High-Rate Field Demonstration of Large-Alphabet Quantum Key Distribution

DTIC Science & Technology

2017-05-22

QKD, 2015 MDI−QKD, 2016 CV/GMCS, 2016 BBM92, 2009 COW , 2015 This work Figure 4: Comparison of our P&M DO-QKD results to previously published QKD system...device-independent QKD (39). CV/GMCS: distance record for continuous-variable QKD (40). BBM92: secure throughput record for two-dimensional entanglement-based QKD (41). COW : distance record for QKD (20). 17

Genome-wide analysis of transcription factors during somatic embryogenesis in banana (Musa spp.) cv. Grand Naine.

PubMed

Shivani; Awasthi, Praveen; Sharma, Vikrant; Kaur, Navjot; Kaur, Navneet; Pandey, Pankaj; Tiwari, Siddharth

2017-01-01

Transcription factors BABY BOOM (BBM), WUSCHEL (WUS), BSD, LEAFY COTYLEDON (LEC), LEAFY COTYLEDON LIKE (LIL), VIVIPAROUS1 (VP1), CUP SHAPED COTYLEDONS (CUC), BOLITA (BOL), and AGAMOUS LIKE (AGL) play a crucial role in somatic embryogenesis. In this study, we identified eighteen genes of these nine transcription factors families from the banana genome database. All genes were analyzed for their structural features, subcellular, and chromosomal localization. Protein sequence analysis indicated the presence of characteristic conserved domains in these transcription factors. Phylogenetic analysis revealed close evolutionary relationship among most transcription factors of various monocots. The expression patterns of eighteen genes in embryogenic callus containing somatic embryos (precisely isolated by Laser Capture Microdissection), non-embryogenic callus, and cell suspension cultures of banana cultivar Grand Naine were analyzed. The application of 2, 4-dichlorophenoxyacetic acid (2, 4-D) in the callus induction medium enhanced the expression of MaBBM1, MaBBM2, MaWUS2, and MaVP1 in the embryogenic callus. It suggested 2, 4-D acts as an inducer for the expression of these genes. The higher expression of MaBBM2 and MaWUS2 in embryogenic cell suspension (ECS) as compared to non-embryogenic cells suspension (NECS), suggested that these genes may play a crucial role in banana somatic embryogenesis. MaVP1 showed higher expression in both ECS and NECS, whereas MaLEC2 expression was significantly higher in NECS. It suggests that MaLEC2 has a role in the development of non-embryogenic cells. We postulate that MaBBM2 and MaWUS2 can be served as promising molecular markers for the embryogencity in banana.

Genome-wide analysis of transcription factors during somatic embryogenesis in banana (Musa spp.) cv. Grand Naine

PubMed Central

Shivani; Awasthi, Praveen; Sharma, Vikrant; Kaur, Navjot; Kaur, Navneet; Pandey, Pankaj

2017-01-01

Transcription factors BABY BOOM (BBM), WUSCHEL (WUS), BSD, LEAFY COTYLEDON (LEC), LEAFY COTYLEDON LIKE (LIL), VIVIPAROUS1 (VP1), CUP SHAPED COTYLEDONS (CUC), BOLITA (BOL), and AGAMOUS LIKE (AGL) play a crucial role in somatic embryogenesis. In this study, we identified eighteen genes of these nine transcription factors families from the banana genome database. All genes were analyzed for their structural features, subcellular, and chromosomal localization. Protein sequence analysis indicated the presence of characteristic conserved domains in these transcription factors. Phylogenetic analysis revealed close evolutionary relationship among most transcription factors of various monocots. The expression patterns of eighteen genes in embryogenic callus containing somatic embryos (precisely isolated by Laser Capture Microdissection), non-embryogenic callus, and cell suspension cultures of banana cultivar Grand Naine were analyzed. The application of 2, 4-dichlorophenoxyacetic acid (2, 4-D) in the callus induction medium enhanced the expression of MaBBM1, MaBBM2, MaWUS2, and MaVP1 in the embryogenic callus. It suggested 2, 4-D acts as an inducer for the expression of these genes. The higher expression of MaBBM2 and MaWUS2 in embryogenic cell suspension (ECS) as compared to non-embryogenic cells suspension (NECS), suggested that these genes may play a crucial role in banana somatic embryogenesis. MaVP1 showed higher expression in both ECS and NECS, whereas MaLEC2 expression was significantly higher in NECS. It suggests that MaLEC2 has a role in the development of non-embryogenic cells. We postulate that MaBBM2 and MaWUS2 can be served as promising molecular markers for the embryogencity in banana. PMID:28797040

The Use of Intraservice Work per Unit of Time (IWPUT) and the Building Block Method (BBM) for the Calculation of Surgical Work

PubMed Central

Mabry, Charles D.; McCann, Barton C.; Harris, Jean A.; Martin, Janet; Gage, John O.; Fischer, Josef E.; Opelka, Frank G.; Zwolak, Robert; Borman, Karen; Preskitt, John T.; Collicott, Paul E.; McGinnis, LaMar; Cohn, Isidore

2005-01-01

Objective: We will review the contribution to the Medicare Fee Schedule (MFS) by the techniques of intensity of work per unit of time (IWPUT), the building block methodology (BBM), and the work accomplished by the American College of Surgeons General Surgery Coding & Reimbursement Committee (GSCRC) in using IWPUT/BBM to detect undervalued surgical procedures and recommend payment increases. Summary Background Data: The MFS has had a major impact on surgeons’ income since its introduction in 1992 by the Centers for Medicare and Medicaid (CMS) and additionally has been adopted for use by many commercial insurers. A major component of MFS is physician work, measured as the relative value of work (RVW), which has 2 components: time and intensity. These components are incorporated by: RVW = time × intensity. Methods: This work formula can be rearranged to give the IWPUT, which has become a powerful tool to calculate the amount of RVW performed by physicians. Most procedures are valued by the total RVW in the global surgical package, which includes pre-, intra-, and postoperative care for a time after surgery. Summing these perioperative components into RVW is called the building block methodology (BBM). Results: Using these techniques, the GSCRC increased the values for 314 surgery procedures during a recent CMS 5-year review, resulting in an increase to general surgeons of roughly $76 million annually. Conclusions: The use of IWPUT/BBM has been instrumental to correct payment for undervalued surgical procedures. They are powerful methods to measure RVW across specialties and to solve reimbursement, compensation, and practice management problems facing surgeons. PMID:15912042

Effect of culture medium on toxic effect of ZnO nanoparticles to freshwater microalgae

NASA Astrophysics Data System (ADS)

Aravantinou, Andriana F.; Tsarpali, Vasiliki; Dailianis, Stefanos; Manariotis, Ioannis D.

2014-05-01

The widely use of nanoparticles (NPs) in many products, is increasing over time. The release of NPs into the environment may affect ecosystems, and therefore it is essential to study their impact on aquatic organisms. The aim of this work was to investigate the effect of zinc oxide (ZnO) NPs on microalgae, cultured in different mediums. Chlorococcum sp. and Scenedesmus rubescens were used as freshwater microalgae model species in order to investigate the toxic effects of ZnO NPs. Microalgae species exposed to ZnO NPs concentrations varying from 0.081 to 810 mg/L for different periods of time (24 to 96 h) and two different culture mediums. The aggregation level and particle size distribution of NPs were also determined during the experiments. The experimental results revealed significant differences on algae growth rates depending on the selected culture medium. Specifically, the toxic effect of ZnO NPs in Chlorococcum sp. was higher in cultures with 1/3N BG-11 medium than in BBM medium, despite the fact that the dissolved zinc concentration was higher in BBM medium. On the other hand, Scenedesmus rubescens exhibited the exact opposite behavior, with the highest toxic effect in cultures with BBM medium. Both species growth was significantly affected by the exposure time, the NPs concentrations, and mainly the culture medium.

Phosphatidylethanolamine N-methyltransferase activity is increased in rat intestinal brush-border membrane by chronic ethanol ingestion.

PubMed

Furtado, Valéria Cristina Soares; Takiya, Christina Maeda; Braulio, Valeria Bender

2002-01-01

Phosphatidylethanolamine N-methyltransferase (PEMT) catalyses the synthesis of phosphatidylcholine from phosphatidylethanolamine. The aim of this study was to evaluate the effect of chronic ethanol ingestion on PEMT activity in the jejunal brush-border membrane (BBM) of adequately nourished rats. For this purpose, rats were fed a liquid diet containing ethanol [ethanol-fed group (EFG)] or an isocaloric liquid diet without ethanol [pair-fed group (PFG)] for 4 weeks. Diet ingestion, body weight, nitrogen balance and urinary creatinine excretion were monitored during the experimental period, and serum transferrin levels were determined at the end. BBM was isolated for the determination of PEMT activity. PEMT activity was significantly increased in the jejunal BBM of the EFG. Nutritional parameters, however, did not differ between groups. The increase in PEMT activity may be attributed exclusively to chronic ethanol ingestion, since a major nutritional deficit was excluded.

Morphogenic Regulators Baby boom and Wuschel Improve Monocot Transformation.

PubMed

Lowe, Keith; Wu, Emily; Wang, Ning; Hoerster, George; Hastings, Craig; Cho, Myeong-Je; Scelonge, Chris; Lenderts, Brian; Chamberlin, Mark; Cushatt, Josh; Wang, Lijuan; Ryan, Larisa; Khan, Tanveer; Chow-Yiu, Julia; Hua, Wei; Yu, Maryanne; Banh, Jenny; Bao, Zhongmeng; Brink, Kent; Igo, Elizabeth; Rudrappa, Bhojaraja; Shamseer, P M; Bruce, Wes; Newman, Lisa; Shen, Bo; Zheng, Peizhong; Bidney, Dennis; Falco, S Carl; RegisterIII, James C; Zhao, Zuo-Yu; Xu, Deping; Jones, Todd J; Gordon-Kamm, William James

2016-09-06

While transformation of the major monocot crops is currently possible, the process typically remains confined to one or two genotypes per species, often with poor agronomics, and efficiencies that place these methods beyond the reach of most academic laboratories. Here, we report a transformation approach involving overexpression of the maize (Zea mays) Baby boom (Bbm) and maize Wuschel2 (Wus2) genes, which produced high transformation frequencies in numerous previously non-transformable maize inbred lines. For example, the Pioneer inbred PHH5G is recalcitrant to biolistic and Agrobacterium transformation. However, when Bbm and Wus2 were expressed, transgenic calli were recovered from over 40% of the starting explants, with most producing healthy, fertile plants. Another limitation for many monocots is the intensive labor and greenhouse space required to supply immature embryos for transformation. This problem could be alleviated by using alternative target tissues that could be supplied consistently with automated preparation. As a major step toward this objective, we transformed Bbm and Wus2 directly into either embryo slices from mature seed or leaf segments from seedlings in a variety of Pioneer inbred lines, routinely recovering healthy, fertile T0 plants. Finally, we demonstrated that the maize Bbm and Wus2 genes stimulate transformation in sorghum (Sorghum bicolor) immature embryos, sugarcane (Saccharum officinarum) callus, and indica rice (Oryza sativa var. indica) callus. {copyright, serif} 2016 American Society of Plant Biologists. All rights reserved.

Morphogenic Regulators Baby boom and Wuschel Improve Monocot Transformation[OPEN

PubMed Central

Lowe, Keith; Wu, Emily; Cho, Myeong-Je; Lenderts, Brian; Chamberlin, Mark; Cushatt, Josh; Ryan, Larisa; Khan, Tanveer; Chow-Yiu, Julia; Hua, Wei; Banh, Jenny; Bao, Zhongmeng; Brink, Kent; Igo, Elizabeth; Rudrappa, Bhojaraja; Shamseer, PM; Shen, Bo; Zheng, Peizhong; Bidney, Dennis; Falco, Carl; Zhao, Zuo-Yu; Xu, Deping

2016-01-01

While transformation of the major monocot crops is currently possible, the process typically remains confined to one or two genotypes per species, often with poor agronomics, and efficiencies that place these methods beyond the reach of most academic laboratories. Here, we report a transformation approach involving overexpression of the maize (Zea mays) Baby boom (Bbm) and maize Wuschel2 (Wus2) genes, which produced high transformation frequencies in numerous previously nontransformable maize inbred lines. For example, the Pioneer inbred PHH5G is recalcitrant to biolistic and Agrobacterium tumefaciens transformation. However, when Bbm and Wus2 were expressed, transgenic calli were recovered from over 40% of the starting explants, with most producing healthy, fertile plants. Another limitation for many monocots is the intensive labor and greenhouse space required to supply immature embryos for transformation. This problem could be alleviated using alternative target tissues that could be supplied consistently with automated preparation. As a major step toward this objective, we transformed Bbm and Wus2 directly into either embryo slices from mature seed or leaf segments from seedlings in a variety of Pioneer inbred lines, routinely recovering healthy, fertile T0 plants. Finally, we demonstrated that the maize Bbm and Wus2 genes stimulate transformation in sorghum (Sorghum bicolor) immature embryos, sugarcane (Saccharum officinarum) callus, and indica rice (Oryza sativa ssp indica) callus. PMID:27600536

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vilarrasa, Víctor; Rutqvist, Jonny; Blanco Martin, Laura

Expansive soils are suitable as backfill and buffer materials in engineered barrier systems to isolate heat-generating nuclear waste in deep geological formations. The canisters containing nuclear waste would be placed in tunnels excavated at a depth of several hundred meters. The expansive soil should provide enough swelling capacity to support the tunnel walls, thereby reducing the impact of the excavation-damaged zone on the long-term mechanical and flow-barrier performance. In addition to their swelling capacity, expansive soils are characterized by accumulating irreversible strain on suction cycles and by effects of microstructural swelling on water permeability that for backfill or buffer materialsmore » can significantly delay the time it takes to reach full saturation. In order to simulate these characteristics of expansive soils, a dual-structure constitutive model that includes two porosity levels is necessary. The authors present the formulation of a dual-structure model and describe its implementation into a coupled fluid flow and geomechanical numerical simulator. The authors use the Barcelona Basic Model (BBM), which is an elastoplastic constitutive model for unsaturated soils, to model the macrostructure, and it is assumed that the strains of the microstructure, which are volumetric and elastic, induce plastic strain to the macrostructure. The authors tested and demonstrated the capabilities of the implemented dual-structure model by modeling and reproducing observed behavior in two laboratory tests of expansive clay. As observed in the experiments, the simulations yielded nonreversible strain accumulation with suction cycles and a decreasing swelling capacity with increasing confining stress. Finally, the authors modeled, for the first time using a dual-structure model, the long-term (100,000 years) performance of a generic heat-generating nuclear waste repository with waste emplacement in horizontal tunnels backfilled with expansive clay and hosted in a clay rock formation. The thermo-hydro-mechanical results of the dual-structure model were compared with those of the standard single-structure BBM. The main difference between the simulation results from the two models is that the dual-structure model predicted a time to fully saturate the expansive clay barrier on the order of thousands of years, whereas the standard single-structure BBM yielded a time on the order of tens of years. These examples show that a dual-structure model, such as the one presented here, is necessary to properly model the thermo-hydro-mechanical behavior of expansive soils.« less

Ezetimibe Promotes Brush Border Membrane-to-Lumen Cholesterol Efflux in the Small Intestine

PubMed Central

Nakano, Takanari; Inoue, Ikuo; Takenaka, Yasuhiro; Ono, Hiraku; Katayama, Shigehiro; Awata, Takuya; Murakoshi, Takayuki

2016-01-01

Ezetimibe inhibits Niemann-Pick C1-like 1 (NPC1L1), an apical membrane cholesterol transporter of enterocytes, thereby reduces intestinal cholesterol absorption. This treatment also increases extrahepatic reverse cholesterol transport via an undefined mechanism. To explore this, we employed a trans-intestinal cholesterol efflux (TICE) assay, which directly detects circulation-to-intestinal lumen 3H-cholesterol transit in a cannulated jejunal segment, and found an increase of TICE by 45%. To examine whether such increase in efflux occurs at the intestinal brush border membrane(BBM)-level, we performed luminal perfusion assays, similar to TICE but the jejunal wall was labelled with orally-given 3H-cholesterol, and determined elevated BBM-to-lumen cholesterol efflux by 3.5-fold with ezetimibe. Such increased efflux probably promotes circulation-to-lumen cholesterol transit eventually; thus increases TICE. Next, we wondered how inhibition of NPC1L1, an influx transporter, resulted in increased efflux. When we traced orally-given 3H-cholesterol in mice, we found that lumen-to-BBM 3H-cholesterol transit was rapid and less sensitive to ezetimibe treatment. Comparison of the efflux and fractional cholesterol absorption revealed an inverse correlation, indicating the efflux as an opposite-regulatory factor for cholesterol absorption efficiency and counteracting to the naturally-occurring rapid cholesterol influx to the BBM. These suggest that the ezetimibe-stimulated increased efflux is crucial in reducing cholesterol absorption. Ezetimibe-induced increase in cholesterol efflux was approximately 2.5-fold greater in mice having endogenous ATP-binding cassette G5/G8 heterodimer, the major sterol efflux transporter of enterocytes, than the knockout counterparts, suggesting that the heterodimer confers additional rapid BBM-to-lumen cholesterol efflux in response to NPC1L1 inhibition. The observed framework for intestinal cholesterol fluxes may provide ways to modulate the flux to dispose of endogenous cholesterol efficiently for therapeutic purposes. PMID:27023132

Ezetimibe Promotes Brush Border Membrane-to-Lumen Cholesterol Efflux in the Small Intestine.

PubMed

Nakano, Takanari; Inoue, Ikuo; Takenaka, Yasuhiro; Ono, Hiraku; Katayama, Shigehiro; Awata, Takuya; Murakoshi, Takayuki

2016-01-01

Ezetimibe inhibits Niemann-Pick C1-like 1 (NPC1L1), an apical membrane cholesterol transporter of enterocytes, thereby reduces intestinal cholesterol absorption. This treatment also increases extrahepatic reverse cholesterol transport via an undefined mechanism. To explore this, we employed a trans-intestinal cholesterol efflux (TICE) assay, which directly detects circulation-to-intestinal lumen 3H-cholesterol transit in a cannulated jejunal segment, and found an increase of TICE by 45%. To examine whether such increase in efflux occurs at the intestinal brush border membrane(BBM)-level, we performed luminal perfusion assays, similar to TICE but the jejunal wall was labelled with orally-given 3H-cholesterol, and determined elevated BBM-to-lumen cholesterol efflux by 3.5-fold with ezetimibe. Such increased efflux probably promotes circulation-to-lumen cholesterol transit eventually; thus increases TICE. Next, we wondered how inhibition of NPC1L1, an influx transporter, resulted in increased efflux. When we traced orally-given 3H-cholesterol in mice, we found that lumen-to-BBM 3H-cholesterol transit was rapid and less sensitive to ezetimibe treatment. Comparison of the efflux and fractional cholesterol absorption revealed an inverse correlation, indicating the efflux as an opposite-regulatory factor for cholesterol absorption efficiency and counteracting to the naturally-occurring rapid cholesterol influx to the BBM. These suggest that the ezetimibe-stimulated increased efflux is crucial in reducing cholesterol absorption. Ezetimibe-induced increase in cholesterol efflux was approximately 2.5-fold greater in mice having endogenous ATP-binding cassette G5/G8 heterodimer, the major sterol efflux transporter of enterocytes, than the knockout counterparts, suggesting that the heterodimer confers additional rapid BBM-to-lumen cholesterol efflux in response to NPC1L1 inhibition. The observed framework for intestinal cholesterol fluxes may provide ways to modulate the flux to dispose of endogenous cholesterol efficiently for therapeutic purposes.

Use of a Dual-Structure Constitutive Model for Predicting the Long-Term Behavior of an Expansive Clay Buffer in a Nuclear Waste Repository

DOE PAGES

Vilarrasa, Víctor; Rutqvist, Jonny; Blanco Martin, Laura; ...

2015-12-31

Expansive soils are suitable as backfill and buffer materials in engineered barrier systems to isolate heat-generating nuclear waste in deep geological formations. The canisters containing nuclear waste would be placed in tunnels excavated at a depth of several hundred meters. The expansive soil should provide enough swelling capacity to support the tunnel walls, thereby reducing the impact of the excavation-damaged zone on the long-term mechanical and flow-barrier performance. In addition to their swelling capacity, expansive soils are characterized by accumulating irreversible strain on suction cycles and by effects of microstructural swelling on water permeability that for backfill or buffer materialsmore » can significantly delay the time it takes to reach full saturation. In order to simulate these characteristics of expansive soils, a dual-structure constitutive model that includes two porosity levels is necessary. The authors present the formulation of a dual-structure model and describe its implementation into a coupled fluid flow and geomechanical numerical simulator. The authors use the Barcelona Basic Model (BBM), which is an elastoplastic constitutive model for unsaturated soils, to model the macrostructure, and it is assumed that the strains of the microstructure, which are volumetric and elastic, induce plastic strain to the macrostructure. The authors tested and demonstrated the capabilities of the implemented dual-structure model by modeling and reproducing observed behavior in two laboratory tests of expansive clay. As observed in the experiments, the simulations yielded nonreversible strain accumulation with suction cycles and a decreasing swelling capacity with increasing confining stress. Finally, the authors modeled, for the first time using a dual-structure model, the long-term (100,000 years) performance of a generic heat-generating nuclear waste repository with waste emplacement in horizontal tunnels backfilled with expansive clay and hosted in a clay rock formation. The thermo-hydro-mechanical results of the dual-structure model were compared with those of the standard single-structure BBM. The main difference between the simulation results from the two models is that the dual-structure model predicted a time to fully saturate the expansive clay barrier on the order of thousands of years, whereas the standard single-structure BBM yielded a time on the order of tens of years. These examples show that a dual-structure model, such as the one presented here, is necessary to properly model the thermo-hydro-mechanical behavior of expansive soils.« less

On the incidence of Mg II absorbers along the blazar sightlines

NASA Astrophysics Data System (ADS)

Mishra, S.; Chand, H.; Krishna, Gopal-; Joshi, R.; Shchekinov, Y. A.; Fatkhullin, T. A.

2018-02-01

It is widely believed that the cool gas clouds traced by Mg II absorption, within a velocity offset of 5000 km s-1 relative to the background quasar are mostly associated with the quasar itself, whereas the absorbers seen at larger velocity offsets towards us are intervening absorber systems and hence their existence is completely independent of the background quasar. Recent evidence by Bergeron et al. (hereinafter BBM) has seriously questioned this paradigm, by showing that the number density of intervening Mg II absorbers towards the 45 blazars in their sample is nearly two times the expectation based on the Mg II absorption systems seen towards normal quasars (QSOs). Given its serious implications, it becomes important to revisit this finding, by enlarging the blazar sample and subjecting it to an independent analysis. Here, we first report the outcome of our re-analysis of the available spectroscopic data for the BBM sample itself. Our analysis of the BBM sample reproduces their claimed factor of 2 excess of dN/dz along blazar sightlines, vis-à-vis normal QSOs. We have also assembled an approxmately three times larger sample of blazars, albeit with moderately sensitive optical spectra. Using this sample together with the BBM sample, our analysis shows that the dN/dz of the Mg II absorbers statistically matches that known for normal QSO sightlines. Further, the analysis indicates that associated absorbers might be contributing significantly to the estimated dN/dz up to offset speeds Δv ∼ 0.2c relative to the blazar.

Breadboarding activities of the TROPOMI-SWIR module

NASA Astrophysics Data System (ADS)

Hoogeveen, Ruud W. M.; Jongma, Rienk T.; Tol, Paul J. J.; Gloudemans, Annemieke; Aben, Ilse; de Vries, Johan; Visser, Huib; Boslooper, Erik; Dobber, Marcel; Levelt, Pieternel F.

2007-10-01

The TROPOMI instrument concept is part of the TRAQ mission proposal to ESA in response to the Call for Ideas in 2005. TRAQ (TRopospheric composition and Air Quality) has been accepted for a further pre-phase A study for the next Earth Explorer core Mission. A very similar instrument has been proposed for the CAMEO platform to the US National Research Council decadal study, which has also been accepted for further study. TROPOMI is a nadir-viewing grating-based imaging spectrometer using the Dutch OMI and SCIAMACHY heritage. It includes an UV-VIS-NIR module that consists of three UV-VIS channels continuously covering the 270-490 nm range to determine O 3, NO II, HCHO, SO II, aerosols and a NIR-channel covering 710-775 nm for cloud detection and information on the aerosol height distribution using the oxygen A band. TROPOMI also includes a SWIR module covering 2305-2385 nm that mainly focuses on determination of CO and CH 4 total columns. All species are measured with sensitivity down to the Earth's surface, thus addressing issues of anthropogenic emissions and their impact on air quality and climate. In the TRAQ mission, unique diurnal time sampling with up to 5 daytime observations over midlatitude regions (Europe, North-America, China) is foreseen by using a non-sun-synchronous, medium-inclination drifting orbit and a 2600 km wide observational swath. Several more general aspects related to the TROPOMI instrument are discussed in a separate paper in this conference. This paper focuses on the development of the SWIR module. A breadboard model (BBM) has been designed and constructed which is as much as possible functionally flight representative. Critical technologies to be demonstrated with the BBM are the SWIR HgCdTe-based 2D focal plane array, the on-board SWIR calibration LED, and in particular, the SRON/TNO developed silicon-based immersed grating that allows a hugely reduced instrument volume. In the presentation the results of a performance analysis of the TROPOMI-SWIR channel will be discussed, as well as results of the detector characterization program on a representative off-the-shelf FPA, and details of the photolithographic production of the immersed grating.

Development of a very small telescope for space astrometry surveyor

NASA Astrophysics Data System (ADS)

Suganuma, M.; Kobayashi, Y.; Gouda, N.; Yano, T.; Yamada, Y.; Takato, N.; Yamauchi, M.

2006-08-01

We report an outline and a current status of developing a small, all-aluminum made telescope for Nano-JASMINE. Nano-JASMINE is a nano-size astrometry satellite that is to be launched in 2008 and will demonstrate some key technologies required for JASMINE (Japan Astrometry Satellite Mission for Infrared Exploration) in a real space environment. It also measures absolute positions of bright stars (z≤8 mag) with accuracies about 1 milli-arcsecond in a few years mission. It has a Ritchey-Chretien type telescope with a 5-cm effective aperture, a 167-cm focal length and a field of view of 0.5x0.5 degree. The telescope only occupies a volume about 15x12x12 cm, and weighs two kilograms or less. Almost all of the structures and the optical elements of the telescope, including two aspherical mirrors three flat mirrors and a dual-angled flat mirror that combines the beam from a relative angle of 99.5 degrees into the primary mirror, are made out of aluminum alloy, being figured by diamond turning machines. The Bread Board Model (BBM) of the telescope was now measured to be achieving a diffraction-limited performance.

Aluminum-made 5-cm reflecting telescope for Nano-JASMINE

NASA Astrophysics Data System (ADS)

Suganuma, Masahiro; Kobayashi, Yukiyasu; Gouda, Naoteru; Yano, Taihei; Yamada, Yoshiyuki; Takato, Naruhisa; Yamauchi, Masahiro

2006-06-01

We report an outline and a current status of developing a small, all-aluminum made telescope for Nano-JASMINE. Nano-JASMINE is a nano-size astrometry satellite that will demonstrate some key technologies required for JASMINE (Japan Astrometry Satellite Mission for Infrared Exploration) in a real space environment and will measure absolute positions of bright stars (z <= 8 mag) with accuracies about 1 milli-arcsecond in a few years mission. It has a Ritchey-Chretien type telescope with a 5-cm effective aperture, a 167-cm focal length and a field of view of 0.5x0.5 degree. The telescope only occupies a volume about 15x12x12 cm, and weighs two kilograms or less. Almost all of the structures and the optical elements of the telescope, including two aspherical mirrors three flat mirrors and a dual-angled flat mirror that combines the beam from a relative angle of 99.5 degrees into the primary mirror, are made out of aluminum alloy, being figured by diamond turning machines. The Bread Board Model (BBM) of the telescope was now measured to be achieving a diffraction-limited performance at room temperature.

Maximization of cell growth and lipid production of freshwater microalga Chlorella vulgaris by enrichment technique for biodiesel production.

PubMed

Wong, Y K; Ho, Y H; Ho, K C; Leung, H M; Yung, K K L

2017-04-01

Chlorella vulgaris was cultivated under limitation and starvation and under controlled conditions using different concentrations of nitrate (NaNO 3 ) and phosphate (K 2 HPO 4 and KH 2 PO 4 ) chemicals in modified Bold basal medium (BBM). The biomass and lipid production responses to different media were examined in terms of optical density, cell density, dry biomass, and lipid productivity. In the 12-day batch culture period, the highest biomass productivity obtained was 72.083 mg L -1  day -1 under BBM - N control P limited condition. The highest lipid content, lipid concentration, and lipid productivity obtained were 53.202 %, 287.291 mg/L, and 23.449 mg L -1  day -1 under BBM - N Control P Deprivation condition, respectively. Nitrogen had a major effect in the biomass concentration of C. vulgaris, while no significant effect was found for phosphorus. Nitrogen and phosphorus starvation was found to be the strategy affecting the lipid accumulation and affected the lipid composition of C. vulgaris cultures.

Exact solutions of fractional mBBM equation and coupled system of fractional Boussinesq-Burgers

NASA Astrophysics Data System (ADS)

Javeed, Shumaila; Saif, Summaya; Waheed, Asif; Baleanu, Dumitru

2018-06-01

The new exact solutions of nonlinear fractional partial differential equations (FPDEs) are established by adopting first integral method (FIM). The Riemann-Liouville (R-L) derivative and the local conformable derivative definitions are used to deal with the fractional order derivatives. The proposed method is applied to get exact solutions for space-time fractional modified Benjamin-Bona-Mahony (mBBM) equation and coupled time-fractional Boussinesq-Burgers equation. The suggested technique is easily applicable and effectual which can be implemented successfully to obtain the solutions for different types of nonlinear FPDEs.

Oral administration of thymoquinone mitigates the effect of cisplatin on brush border membrane enzymes, energy metabolism and antioxidant system in rat intestine.

PubMed

Shahid, Faaiza; Farooqui, Zeba; Abidi, Subuhi; Parwez, Iqbal; Khan, Farah

2017-10-01

Cisplatin (CP) is a widely used chemotherapeutic agent that elicits severe gastrointestinal toxicity. Nigella sativa, a member of family Ranunculaceae, is one of the most revered medicinal plant known for its numerous health benefits. Thymoquinone (TQ), a major bioactive component derived from the volatile oil of Nigella sativa seeds, has been shown to improve gastrointestinal functions in animal models of acute gastric/intestinal injury. In view of this, the aim of the present study was to investigate the protective effect of TQ on CP induced toxicity in rat intestine and to elucidate the mechanism underlying these effects. Rats were divided into four groups viz. control, CP, TQ and CP+TQ. Animals in CP+TQ and TQ groups were orally administered TQ (1.5mg/kg bwt) with and without a single intraperitoneal dose of CP (6mg/kg bwt) respectively. The effect of TQ was determined on CP induced alterations in the activities of brush border membrane (BBM), carbohydrate metabolism, and antioxidant defense enzymes in rat intestine. TQ administration significantly mitigated CP induced decline in the specific activities of BBM marker enzymes, both in the mucosal homogenates and in the BBM vesicles (BBMV) prepared from intestinal mucosa. Furthermore, TQ administration restored the redox and metabolic status of intestinal mucosal tissue in CP treated rats. The biochemical results were supported by histopathological findings that showed extensive damage to intestine in CP treated rats and markedly preserved intestinal histoarchitecture in CP and TQ co-treated group. The biochemical and histological data suggest a protective effect of TQ against CP-induced gastrointestinal damage. Thus, TQ may have a potential for clinical application to counteract the accompanying gastrointestinal toxicity in CP chemotherapy. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Speed and accuracy of mobile BlackBerry Messenger to transmit chest radiography images from a small community emergency department to a geographically remote referral center.

PubMed

Scheuermeyer, Frank; Grunau, Brian; Cheyne, Jay; Grafstein, Eric; Christenson, Jim; Ho, Kendall

2016-06-01

Small emergency departments (EDs) may rely on radiologists at remote centers for interpretations of chest radiographs (CXRs). We investigated systematic transmission of CXR images from a small ED to a geographically remote referral center using the mobile BlackBerry Messenger (BBM) application. Investigators obtained de-identified CXR images of consecutive ED patients via mobile phone camera. Each CXR image, along with a brief clinical history, was sent via BBM to an emergency physician located at a remote referral site, and the receiving physician replied via BBM to confirm reception. All communications, image generation, and image analysis was conducted on mobile phones. The primary outcome was the proportion of BBMs received within two minutes of sending; the secondary outcome was the proportion of BBM replies to the sending physician within five minutes. Image accuracy-comparing the radiologist's interpretation with the receiving emergency physician's interpretation-was estimated using predefined criteria. Of 1281 consecutive ED patients, 231 (18.0 %) had CXRs obtained, 320 CXRs were analyzed and 611 BBMs sent. All BBMs (100.0%, 95% confidence interval (CI) 99.4-00.0) arrived within two minutes; 595 BBMs (97.4%, 95% CI 95.8-98.4) were replied to within five minutes. Of the 58 CXRs with abnormalities requiring intervention, there were 55 concordances (overall agreement 94.2%, 95% CI 85.9-98.3; kappa 0.95, 95% CI 0.89-1.0) CONCLUSION: Systematic transmission of CXR images from a small ED to a remote large center using mobile phones may be a safe and effective strategy to rapidly communicate important patient information. © The Author(s) 2015.

Exact traveling wave solutions of the KP-BBM equation by using the new approach of generalized (G'/G)-expansion method.

PubMed

Alam, Md Nur; Akbar, M Ali

2013-01-01

The new approach of the generalized (G'/G)-expansion method is an effective and powerful mathematical tool in finding exact traveling wave solutions of nonlinear evolution equations (NLEEs) in science, engineering and mathematical physics. In this article, the new approach of the generalized (G'/G)-expansion method is applied to construct traveling wave solutions of the Kadomtsev-Petviashvili-Benjamin-Bona-Mahony (KP-BBM) equation. The solutions are expressed in terms of the hyperbolic functions, the trigonometric functions and the rational functions. By means of this scheme, we found some new traveling wave solutions of the above mentioned equation.

Cyclosporin A treatment induces overexpression of P-glycoprotein in the kidney and other tissues.

PubMed

Jetté, L; Beaulieu, E; Leclerc, J M; Béliveau, R

1996-05-01

To see whether P-glycoprotein (PGP) expressed in renal brush-border membranes (BBM) could interact with compounds known as modulators of multidrug resistance (MDR), photoaffinity-labeling experiments were performed. A 145k-Da protein was photolabeled with [125I] iodoarylazidoprazosin, and this labeling was reduced in the presence of cyclosporin A (CsA) and PSC-833 (PSC). Interaction of CsA with PGP was further investigated by treating rats with daily subcutaneous injections of CsA (10 mg.kg-1.day-1). After this treatment, PGP expression levels were dramatically increased in renal BBM, intestine, liver, and many other tissues except the brain. This induction was a reversible process, since after cessation of CsA administration PGP levels declined to reach values similar to those of the control groups. The increase in PGP expression in the kidney was also detected in photolabeling experiments, suggesting the induction of a functional PGP. A higher dose of CsA (50 mg/kg) given as a bolus injection did not modify PGP expression] in renal BBM. These results demonstrate that CsA induces reversible overexpression of PGP in the rat. This may present significant relevance in the design of clinical trials using CsA as a chemosensitizing agent.

Revisiting the incidence of Mg II absorbers along the blazar sightlines

NASA Astrophysics Data System (ADS)

Mishra, Sapna; Chand, Hum; Gopal-Krishna; Joshi, Ravi

2018-04-01

It is believed that the cool gas clouds traced by Mg II absorption, within a velocity offset of 5000 km/s from the background quasar, are associated with the quasar itself, whereas the absorbers seen at larger velocity offsets towards us are intervening systems and hence their existence is completely independent of the background quasar. Recent evidence by Bergeron et al. 2011 (hereafter BBM), however, seriously questions this canonical view, by showing that the number density of intervening Mg II absorbers along the sightlines towards 45 blazars is, on average, 2 times the expectation based on the Mg II absorption systems seen on the sightlines to normal QSOs. Given the serious implications of this finding, it becomes important to revisit this issue by enlarging the source sample and subjecting it to an independent analysis. Here, we first report our results based on a re-analysis of the spectroscopic data for the BBM sample; this has reproduced their factor 2 excess in dN/dz along blazar sightlines, vis-a-vis the normal QSOs. Next, we assemble a 6 times larger sample of blazar sightlines, albeit with lower SNR. Using this enlarged sample together with the BBM sample, our analysis shows that the dN/dz of Mg II absorbers statistically matches that known for normal QSO sightlines.

A Schrödinger equation for solving the Bender-Brody-Müller conjecture

NASA Astrophysics Data System (ADS)

Moxley, Frederick Ira

2017-11-01

The Hamiltonian of a quantum mechanical system has an affiliated spectrum. If this spectrum is the sequence of prime numbers, a connection between quantum mechanics and the nontrivial zeros of the Riemann zeta function can be made. In this case, the Riemann zeta function is analogous to chaotic quantum systems, as the harmonic oscillator is for integrable quantum systems. Such quantum Riemann zeta function analogies have led to the Bender-Brody-Müller (BBM) conjecture, which involves a non-Hermitian Hamiltonian that maps to the zeros of the Riemann zeta function. If the BBM Hamiltonian can be shown to be Hermitian, then the Riemann Hypothesis follows. As such, herein we perform a symmetrization procedure of the BBM Hamiltonian to obtain a unique Hermitian Hamiltonian that maps to the zeros of the analytic continuation of the Riemann zeta function, and discuss the eigenvalues of the results. Moreover, a second quantization of the resulting Schrödinger equation is performed, and a convergent solution for the nontrivial zeros of the analytic continuation of the Riemann zeta function is obtained. Finally, the Hilbert-Pólya conjecture is discussed, and it is heuristically shown that the real part of every nontrivial zero of the Riemann zeta function converges at σ = 1/2.

Differential Association of the Na+/H+ Exchanger Regulatory Factor (NHERF) Family of Adaptor Proteins with the Raft-and the Non-Raft Brush Border Membrane Fractions of NHE3

PubMed Central

Sultan, Ayesha; Luo, Min; Yu, Qin; Riederer, Brigitte; Xia, Weiliang; Chen, Mingmin; Lissner, Simone; Gessner, Johannes E.; Donowitz, Mark; Yun, C. Chris; deJonge, Hugo; Lamprecht, Georg; Seidler, Ursula

2014-01-01

Background/Aims Trafficking, brush border membrane (BBM) retention, and signal-specific regulation of the Na+/H+ exchanger NHE3 is regulated by the Na+/H+ Exchanger Regulatory Factor (NHERF) family of PDZ-adaptor proteins, which enable the formation of multiprotein complexes. It is unclear, however, what determines signal specificity of these NHERFs. Thus, we studied the association of NHE3, NHERF1 (EBP50), NHERF2 (E3KARP), and NHERF3 (PDZK1) with lipid rafts in murine small intestinal BBM. Methods Detergent resistant membranes (“lipid rafts”) were isolated by floatation of Triton X-incubated small intestinal BBM from a variety of knockout mouse strains in an Optiprep step gradient. Acid-activated NHE3 activity was measured fluorometrically in BCECF-loaded microdissected villi, or by assessment of CO2/HCO3− mediated increase in fluid absorption in perfused jejunal loops of anethetized mice. Results NHE3 was found to partially associate with lipid rafts in the native BBM, and NHE3 raft association had an impact on NHE3 transport activity and regulation in vivo. NHERF1, 2 and 3 were differentially distributed to rafts and non-rafts, with NHERF2 being most raft-associated and NHERF3 entirely non-raft associated. NHERF2 expression enhanced the localization of NHE3 to membrane rafts. The use of acid sphingomyelinase-deficient mice, which have altered membrane lipid as well as lipid raft composition, allowed us to test the validity of the lipid raft concept in vivo. Conclusions The differential association of the NHERFs with the raft-associated and the non-raft fraction of NHE3 in the brush border membrane is one component of the differential and signal-specific NHE3 regulation by the different NHERFs. PMID:24297041

Differential association of the Na+/H+ Exchanger Regulatory Factor (NHERF) family of adaptor proteins with the raft- and the non-raft brush border membrane fractions of NHE3.

PubMed

Sultan, Ayesha; Luo, Min; Yu, Qin; Riederer, Brigitte; Xia, Weiliang; Chen, Mingmin; Lissner, Simone; Gessner, Johannes E; Donowitz, Mark; Yun, C Chris; deJonge, Hugo; Lamprecht, Georg; Seidler, Ursula

2013-01-01

Trafficking, brush border membrane (BBM) retention, and signal-specific regulation of the Na+/H+ exchanger NHE3 is regulated by the Na+/H+ Exchanger Regulatory Factor (NHERF) family of PDZ-adaptor proteins, which enable the formation of multiprotein complexes. It is unclear, however, what determines signal specificity of these NHERFs. Thus, we studied the association of NHE3, NHERF1 (EBP50), NHERF2 (E3KARP), and NHERF3 (PDZK1) with lipid rafts in murine small intestinal BBM. Detergent resistant membranes ("lipid rafts") were isolated by floatation of Triton X-incubated small intestinal BBM from a variety of knockout mouse strains in an Optiprep step gradient. Acid-activated NHE3 activity was measured fluorometrically in BCECF-loaded microdissected villi, or by assessment of CO2/HCO3(-) mediated increase in fluid absorption in perfused jejunal loops of anethetized mice. NHE3 was found to partially associate with lipid rafts in the native BBM, and NHE3 raft association had an impact on NHE3 transport activity and regulation in vivo. NHERF1, 2 and 3 were differentially distributed to rafts and non-rafts, with NHERF2 being most raft-associated and NHERF3 entirely non-raft associated. NHERF2 expression enhanced the localization of NHE3 to membrane rafts. The use of acid sphingomyelinase-deficient mice, which have altered membrane lipid as well as lipid raft composition, allowed us to test the validity of the lipid raft concept in vivo. The differential association of the NHERFs with the raft-associated and the non-raft fraction of NHE3 in the brush border membrane is one component of the differential and signal-specific NHE3 regulation by the different NHERFs. © 2013 S. Karger AG, Basel.

Shannon entropy and Fisher information of the one-dimensional Klein-Gordon oscillator with energy-dependent potential

NASA Astrophysics Data System (ADS)

Boumali, Abdelmalek; Labidi, Malika

2018-02-01

In this paper, we studied, at first, the influence of the energy-dependent potentials on the one-dimensionless Klein-Gordon oscillator. Then, the Shannon entropy and Fisher information of this system are investigated. The position and momentum information entropies for the low-lying states n = 0, 1, 2 are calculated. Some interesting features of both Fisher and Shannon densities, as well as the probability densities, are demonstrated. Finally, the Stam, Cramer-Rao and Bialynicki-Birula-Mycielski (BBM) inequalities have been checked, and their comparison with the regarding results have been reported. We showed that the BBM inequality is still valid in the form Sx + Sp ≥ 1 +ln π, as well as in ordinary quantum mechanics.

Implant Stability of Biological Hydroxyapatites Used in Dentistry

PubMed Central

Ramírez Fernández, Maria Piedad; Gehrke, Sergio A.; Mazón, Patricia; Calvo-Guirado, Jose L.; De Aza, Piedad N.

2017-01-01

The aim of the present study was to monitor implant stability after sinus floor elevation with two biomaterials during the first six months of healing by resonance frequency analysis (RFA), and how physico-chemical properties affect the implant stability quotient (ISQ) at the placement and healing sites. Bilateral maxillary sinus augmentation was performed in 10 patients in a split-mouth design using a bobine HA (BBM) as a control and porcine HA (PBM). Six months after sinus lifting, 60 implants were placed in the posterior maxilla. The ISQ was recorded on the day of surgery from RFA at T1 (baseline), T2 (three months), and T3 (six months). Statistically significant differences were found in the ISQ values during the evaluation period. The ISQ (baseline) was 63.8 ± 2.97 for BBM and 62.6 ± 2.11 for PBM. The ISQ (T2) was ~73.5 ± 4.21 and 67 ± 4.99, respectively. The ISQ (T3) was ~74.65 ± 2.93 and 72.9 ± 2.63, respectively. All of the used HAs provide osseointegration and statistical increases in the ISQ at baseline, T2 and T3 (follow-up), respectively. The BBM, sintered at high temperature with high crystallinity and low porosity, presented higher stability, which demonstrates that variations in the physico-chemical properties of a bone substitute material clearly influence implant stability. PMID:28773005

Studies on the protective effect of dietary fish oil on uranyl-nitrate-induced nephrotoxicity and oxidative damage in rat kidney.

PubMed

Priyamvada, Shubha; Khan, Sara A; Khan, Md Wasim; Khan, Sheeba; Farooq, Neelam; Khan, Farah; Yusufi, A N K

2010-01-01

Human and animal exposure demonstrates that uranium is nephrotoxic. However, attempts to reduce it were not found suitable for clinical use. Dietary fish oil (FO) enriched in omega-3 fatty acids reduces the severity of cardiovascular and renal diseases. Present study investigates the protective effect of FO on uranyl nitrate (UN)-induced renal damage. Rats prefed with experimental diets for 15 days, given single nephrotoxic dose of UN (0.5mg/kg body weight) intraperitoneally. After 5d of UN treatment, serum/urine parameters, enzymes of carbohydrate metabolism, brush border membrane (BBM), oxidative stress and phosphate transport were analyzed in rat kidney. UN nephrotoxicity was characterized by increased serum creatinine and blood urea nitrogen. UN increased the activity of lactate dehydrogenase and NADP-malic enzyme whereas decreased malate, isocitrate and glucose-6-phophate dehydrogenases; glucose-6-phophatase, fructose-1, 6-bisphosphatase and BBM enzyme activities. UN caused oxidant/antioxidant imbalances as reflected by increased lipid peroxidation, activities of superoxide dismutase, glutathione peroxidase and decreased catalase activity. Feeding FO alone increased activities of enzymes of glucose metabolism, BBM, oxidative stress and Pi transport. UN-elicited alterations were prevented by FO feeding. However, corn oil had no such effects and was not similarly effective. In conclusion, FO appears to protect against UN-induced nephrotoxicity by improving energy metabolism and antioxidant defense mechanism. Copyright 2009 Elsevier Ltd. All rights reserved.

Acute and chronic exposure of rat intestinal mucosa to dextran promotes SGLTI-mediated glucose transport.

PubMed

Debnam, E S; Denholm, E E; Grimble, G K

1998-08-01

The intestinal handling of dextran, an alpha-1,6-linked glucose polymer, is poor compared with starch, and some ingested dextran might therefore reach the lower small intestine. As luminal sugar up-regulates SGLT1 (sodium-dependent glucose transporter) locally, we report the effects of a dextran-enriched diet on jejunal and ileal brush border membrane (BBM) glucose uptake. Rats were maintained on a diet containing 65% maltodextrin or 32.5% maltodextrin + 32.5% dextran (10 kD or 40 kD) for 8-10 days, and the kinetics of phlorizin-sensitive [3H]-glucose uptake by purified BBM vesicles was determined. Ingestion of 40-kD but not 10-kD dextran increased Vmax for jejunal and ileal glucose uptake (+64.3% and +61.8% respectively, both P < 0.02). The transport response to 40-kD dextran was in keeping with lower levels of expired H2 at the end of the feeding period. High-performance liquid chromatography (HPLC) analysis of luminal contents indicated extensive hydrolysis of ingested dextran. Finally, 3-h jejunal exposure to 40-kD dextran in vivo increased the Vmax for glucose uptake by jejunal BBM. It is likely that increased SGLT1-mediated glucose uptake after short or longer term mucosal exposure to dextran results from luminal dextran per se or a hydrolysis product. The clinical implications of this up-regulation are discussed.

Ettlia oleoabundans growth and oil production on agricultural anaerobic waste effluents.

PubMed

Yang, Ying; Xu, Jianfeng; Vail, Daniel; Weathers, Pamela

2011-04-01

The feasibility of growth and oil production by Ettlia oleoabundans fed with anaerobic digester effluents of three agriculture wastes from the Arkansas Delta, catfish processing waste, soybean field waste, and rice hulls, was studied. Compared to standard BBM medium, all three effluents were deficient in phosphate and nitrate, but rich in ammonia and urea. Best growth was on 2% (v/v) soy effluent, but scant oil was produced on any of the effluents. When the three effluents were mixed, growth did not substantially increase, but oil content increased up to sixfold, depending on age of the effluent. Similar to growth in BBM, the main fatty acids produced were palmitic, oleic, and linoleic. These results show that anaerobically digested agricultural wastes can potentially support both growth and high oil productivity in E. oleoabundans. Copyright © 2011 Elsevier Ltd. All rights reserved.

Application of agar liquid-gel transition in cultivation and harvesting of microalgae for biodiesel production.

PubMed

Kumar, Vinod; Nanda, Manisha; Verma, Monu

2017-11-01

In order to increase microalgal biomass productivity efficient cultivation and harvesting methods are needed against the available traditional methods. The present study focuses on the same by harvesting microalgae using agar gel. Agar medium containing bold's basal medium (BBM) undergoes a thermoreversible gel transition. As compared to the traditional protocols, this gel is used to cultivate microalgae without even affecting the total productivity. To develop the gel for microalgae cultivation, agar was boiled in BBM. Then the agar was cooled to 35°C and microalgae culture was added to it. After seeding the microalgae the temperature of the agar was further decreased by 10°C to induce gelation. Instead of isolated cells microalgae were grown in clusters within the agar gel. Microalgal clusters gravimetrically settle at the bottom within 2h. In this method agar can be reused. Copyright © 2017 Elsevier Ltd. All rights reserved.

Pepper, sweet (Capsicum annuum).

PubMed

Heidmann, Iris; Boutilier, Kim

2015-01-01

Capsicum (pepper) species are economically important crops that are recalcitrant to genetic transformation by Agrobacterium (Agrobacterium tumefaciens). A number of protocols for pepper transformation have been described but are not routinely applicable. The main bottleneck in pepper transformation is the low frequency of cells that are both susceptible for Agrobacterium infection and have the ability to regenerate. Here, we describe a protocol for the efficient regeneration of transgenic sweet pepper (C. annuum) through inducible activation of the BABY BOOM (BBM) AP2/ERF transcription factor. Using this approach, we can routinely achieve a transformation efficiency of at least 0.6 %. The main improvements in this protocol are the reproducibility in transforming different genotypes and the ability to produce fertile shoots. An added advantage of this protocol is that BBM activity can be induced subsequently in stable transgenic lines, providing a novel regeneration system for clonal propagation through somatic embryogenesis.

Tactile device utilizing a single magnetorheological sponge: experimental investigation

NASA Astrophysics Data System (ADS)

Kim, Soomin; Kim, Pyunghwa; Choi, Seung-Hyun; Oh, Jong-Seok; Choi, Seung-Bok

2015-04-01

In the field of medicine, several new areas have been currently introduced such as robot-assisted surgery. However, the major drawback of these systems is that there is no tactile communication between doctors and surgical sites. When the tactile system is brought up, telemedicine including telerobotic surgery can be enhanced much more than now. In this study, a new tactile device is designed using a single magnetorhological (MR) sponge cell to realize the sensation of human organs. MR fluids and an open celled polyurethane foam are used to propose the MR sponge cell. The viscous and elastic sensational behaviors of human organs are realized by the MR sponge cell. Before developing the tactile device, tactile sensation according to touch of human fingers are quantified in advance. The finger is then treated as a reduced beam bundle model (BBM) in which the fingertip is comprised of an elastic beam virtually. Under the reduced BBM, when people want to sense an object, the fingertip is investigated by pushing and sliding. Accordingly, while several magnitudes of magnetic fields are applied to the tactile device, normal and tangential reaction forces and bending moment are measured by 6-axis force/torque sensor instead of the fingertip. These measured data are used to compare with soft tissues. It is demonstrated that the proposed MR sponge cell can realize any part of the organ based on the obtained data.

Differential interaction of Escherichia coli heat-labile toxin and cholera toxin with pig intestinal brush border glycoproteins depending on their ABH and related blood group antigenic determinants.

PubMed

Balanzino, L E; Barra, J L; Monferran, C G; Cumar, F A

1994-04-01

The ability of glycoproteins from pig intestinal brush border membranes (BBM) to bind cholera toxin (CT) or heat-labile toxins from strains of Escherichia coli isolated from human (LTh) or pig (LTp) intestines was studied. Glycoproteins capable of binding the toxins are also recognized by antibodies or lectins specific for ABO(H) blood group and related antigens. Pigs expressing A, H, or I antigenic determinants were used for comparison. The toxin-binding capacity of a glycoprotein depends on the toxin type and the blood group epitope borne by the glycoprotein. LTh and LTp preferably bound to several blood group A-active glycoproteins rather than H-active glycoproteins. By contrast, CT practically did not recognize either blood group A- or blood group H-active glycoproteins, while glycoproteins from pigs expressing I antigenic determinants were able to interact with LTh, LTp, and CT. LTh, LTp, or CT glycoprotein binding was selectively inhibited by specific lectins or monosaccharides. Affinity purification of the toxin binding brush border glycoproteins on the basis of their blood group reactivity suggests that such glycoproteins are hydrolytic enzymes. BBM from A+ pigs contain about 27 times more LTh binding sites, in addition to those recognized by CT, than an equivalent membrane preparation from H+ pigs. The present findings may help clarify some previous unclear results on LTh binding to intestinal BBM glycoproteins obtained by use of animals not typed by their ABO(H) blood group phenotype.

New Insights into Somatic Embryogenesis: LEAFY COTYLEDON1, BABY BOOM1 and WUSCHEL-RELATED HOMEOBOX4 Are Epigenetically Regulated in Coffea canephora

PubMed Central

Nic-Can, Geovanny I.; López-Torres, Adolfo; Barredo-Pool, Felipe; Wrobel, Kazimierz; Loyola-Vargas, Víctor M.; Rojas-Herrera, Rafael; De-la-Peña, Clelia

2013-01-01

Plant cells have the capacity to generate a new plant without egg fertilization by a process known as somatic embryogenesis (SE), in which differentiated somatic cells can form somatic embryos able to generate a functional plant. Although there have been advances in understanding the genetic basis of SE, the epigenetic mechanism that regulates this process is still unknown. Here, we show that the embryogenic development of Coffea canephora proceeds through a crosstalk between DNA methylation and histone modifications during the earliest embryogenic stages of SE. We found that low levels of DNA methylation, histone H3 lysine 9 dimethylation (H3K9me2) and H3K27me3 change according to embryo development. Moreover, the expression of LEAFY COTYLEDON1 (LEC1) and BABY BOOM1 (BBM1) are only observed after SE induction, whereas WUSCHEL-RELATED HOMEOBOX4 (WOX4) decreases its expression during embryo maturation. Using a pharmacological approach, it was found that 5-Azacytidine strongly inhibits the embryogenic response by decreasing both DNA methylation and gene expression of LEC1 and BBM1. Therefore, in order to know whether these genes were epigenetically regulated, we used Chromatin Immunoprecipitation (ChIP) assays. It was found that WOX4 is regulated by the repressive mark H3K9me2, while LEC1 and BBM1 are epigenetically regulated by H3K27me3. We conclude that epigenetic regulation plays an important role during somatic embryogenic development, and a molecular mechanism for SE is proposed. PMID:23977240

Optimization Review, Black Butte Mine Superfund Site, Lane County, Oregon

EPA Pesticide Factsheets

The BBM Superfund Site (the site) is located in Lane County, Oregon, approximately 35 miles southeast of Eugene and approximately 10 miles upstream from the Cottage Grove Reservoir (CGR). Mercury mining and processing operations were active at the site...

Automation in School Library Media Centers.

ERIC Educational Resources Information Center

Driver, Russell W.; Driver, Mary Anne

1982-01-01

Surveys the historical development of automated technical processing in schools and notes the impact of this automation in a number of cases. Speculations about the future involvement of school libraries in automated processing and networking are included. Thirty references are listed. (BBM)

Antifungal Effects of Bee Venom Components on Trichophyton rubrum: A Novel Approach of Bee Venom Study for Possible Emerging Antifungal Agent.

PubMed

Park, Joonsoo; Kwon, Osung; An, Hyun-Jin; Park, Kwan Kyu

2018-04-01

Bee venom (BV) has been widely investigated for potential medical uses. Recent inadvertent uses of BV based products have shown to mitigate signs of fungal infections. However, the component mediating the antifungal effect has not been identified. This investigation compares bee venom in its whole and partial forms to evaluate the possible component responsible for the antifungal effect. Forty-eight plates inoculated with Trichophyton rubrum were allocated into four groups. The groups were treated with raw BV (RBV), melittin, apamin and BV based mist (BBM) respectively and each group was further allocated accordingly to three different concentrations. The areas were measured every other day for 14 days to evaluate the kinetic changes of the colonies. The interactions of ratio differences over interval were confirmed in groups treated with RBV and BBM. In RBV, the level of differences were achieved in groups treated with 10 mg/100 µl ( p =0.026) and 40 mg/100 µl ( p =0.000). The mean difference of ratio in groups treated with RBV was evident in day 3 and day 5. The groups that were treated with melittin or apamin did not show any significant interaction. In BBM groups, the significant levels of ratio differences over time intervals were achieved in groups treated with 200 µl/100 µl ( p =0.000) and 300 µl/100 µl ( p =0.030). The the bee venom in its whole form delivered a significant level of inhibition and we concluded that the venom in separated forms are not effective. Moreover, BV based products may exert as potential antifungal therapeutics.

Test-retest reliability of the assessment of postural stability in typically developing children and in hearing impaired children.

PubMed

De Kegel, A; Dhooge, I; Cambier, D; Baetens, T; Palmans, T; Van Waelvelde, H

2011-04-01

The purpose of this study was to establish test-retest reliability of centre of pressure (COP) measurements obtained by an AccuGait portable forceplate (ACG), mean COG sway velocity measured by a Basic Balance Master (BBM) and clinical balance tests in children with and without balance difficulties. 49 typically developing children and 23 hearing impaired children, with a higher risk for stability problems, between 6 and 12 years of age participated. Each child performed the modified Clinical Test of Sensory Interaction on Balance (mCTSIB), Unilateral Stance (US) and Tandem Stance on ACG, mCTSIB and US on BBM and clinical balance tests: one-leg standing, balance beam walking and one-leg hopping. All subjects completed 2 test sessions on 2 different days in the same week assessed by the same examiner. Among COP measurements obtained by the ACG, mean sway velocity was the most reliable parameter with all ICCs higher than 0.72. The standard deviation (SD) of sway velocity, sway area, SD of anterior-posterior and SD of medio-lateral COP data showed moderate to excellent reliability with ICCs between 0.55 and 0.96 but some caution must be taken into account in some conditions. BBM is less reliable but clinical balance tests are as reliable as ACG. Hearing impaired children exhibited better relative reliability (ICC) and comparable absolute reliability (SEM) for most balance parameters compared to typically developing children. Reliable information regarding postural stability of typically developing children and hearing impaired children may be obtained utilizing COP measurements generated by an AccuGait system and clinical balance tests. Copyright © 2011 Elsevier B.V. All rights reserved.

Regulation of renal NaPi-2 expression and tubular phosphate reabsorption by growth hormone in the juvenile rat.

PubMed

Woda, Craig B; Halaihel, Nabil; Wilson, Paul V; Haramati, Aviad; Levi, Moshe; Mulroney, Susan E

2004-07-01

Growth hormone (GH) is an important factor in the developmental adaptation to enhance P(i) reabsorption; however, the nephron sites and mechanisms by which GH regulates renal P(i) uptake remain unclear and are the focus of the present study. Micropuncture experiments were performed after acute thyroparathyroidectomy in the presence and absence of parathyroid hormone (PTH) in adult (14- to 17-wk old), juvenile (4-wk old), and GH-suppressed juvenile male rats. While the phosphaturic effect of PTH was blunted in the juvenile rat compared with the adult, suppression of GH in the juvenile restored fractional P(i) excretion to adult levels. In the presence or absence of PTH, GH suppression in the juvenile rat caused a significant increase in the fractional P(i) delivery to the late proximal convoluted (PCT) and early distal tubule, so that delivery was not different from that in adults. These data were confirmed by P(i) uptake studies into brush-border membrane (BBM) vesicles. Immunofluorescence studies indicate increased BBM type IIa NaP(i) cotransporter (NaPi-2) expression in the juvenile compared with adult rat, and GH suppression reduced NaPi-2 expression to levels observed in the adult. GH replacement in the [N-acetyl-Tyr(1)-d-Arg(2)]-GRF-(1-29)-NH(2)-treated juveniles restored high NaPi-2 expression and P(i) uptake. Together, these novel results demonstrate that the presence of GH in the juvenile animal is crucial for the early developmental upregulation of BBM NaPi-2 and, most importantly, describe the enhanced P(i) reabsorption along the PCT and proximal straight nephron segments in the juvenile rat.

Cooperation of neurotrophin receptor TrkB and Her2 in breast cancer cells facilitates brain metastases.

PubMed

Choy, Cecilia; Ansari, Khairul I; Neman, Josh; Hsu, Sarah; Duenas, Matthew J; Li, Hubert; Vaidehi, Nagarajan; Jandial, Rahul

2017-04-26

Patients with primary breast cancer that is positive for human epidermal growth factor receptor 2 (Her2+) have a high risk of developing metastases in the brain. Despite gains with systemic control of Her2+ disease using molecular therapies, brain metastases remain recalcitrant to therapeutic discovery. The clinical predilection of Her2+ breast cancer cells to colonize the brain likely relies on paracrine mechanisms. The neural niche poses unique selection pressures, and neoplastic cells that utilize the brain microenvironment may have a survival advantage. Tropomyosin-related kinase B (TrkB), Her2, and downstream targets were analyzed in primary breast cancer, breast-to-brain metastasis (BBM) tissues, and tumor-derived cell lines using quantitative real-time PCR, western blot, and immunohistochemical assessment. TrkB function on BBM was confirmed with intracranial, intracardiac, or mammary fat pad xenografts in non-obese diabetic/severe combined immunodeficiency mice. The function of brain-derived neurotrophic factor (BDNF) on cell proliferation and TrkB/Her2 signaling and interactions were confirmed using selective shRNA knockdown and selective inhibitors. The physical interaction of Her2-TrkB was analyzed using electron microscopy, co-immunoprecipitation, and in silico analysis. Dual targeting of Her2 and TrkB was analyzed using clinically utilized treatments. We observed that patient tissues and cell lines derived from Her2+ human BBM displayed increased activation of TrkB, a neurotrophin receptor. BDNF, an extracellular neurotrophin, with roles in neuronal maturation and homeostasis, specifically binds to TrkB. TrkB knockdown in breast cancer cells led to decreased frequency and growth of brain metastasis in animal models, suggesting that circulating breast cancer cells entering the brain may take advantage of paracrine BDNF-TrkB signaling for colonization. In addition, we investigated a possible interaction between TrkB and Her2 receptors on brain metastatic breast cancer cells, and found that BDNF phosphorylated both its cognate TrkB receptor and the Her2 receptor in brain metastatic breast cancer cells. Collectively, our findings suggest that heterodimerization of Her2 and TrkB receptors gives breast cancer cells a survival advantage in the brain and that dual inhibition of these receptors may hold therapeutic potential.

Computer-Assisted Instruction Case Study: The Introductory Marketing Course.

ERIC Educational Resources Information Center

Skinner, Steven J.; Grimm, Jim L.

1979-01-01

Briefly reviews research on the effectiveness of CAI in instruction, and describes a study comparing the performance of students using one program for basic marketing--TRMP (Tutorial Review of Marketing Principles)--with or without a study guide, the study guide alone, and a traditional class. (BBM)

Higher-Order Hamiltonian Model for Unidirectional Water Waves

NASA Astrophysics Data System (ADS)

Bona, J. L.; Carvajal, X.; Panthee, M.; Scialom, M.

2018-04-01

Formally second-order correct, mathematical descriptions of long-crested water waves propagating mainly in one direction are derived. These equations are analogous to the first-order approximations of KdV- or BBM-type. The advantage of these more complex equations is that their solutions corresponding to physically relevant initial perturbations of the rest state may be accurate on a much longer timescale. The initial value problem for the class of equations that emerges from our derivation is then considered. A local well-posedness theory is straightforwardly established by a contraction mapping argument. A subclass of these equations possess a special Hamiltonian structure that implies the local theory can be continued indefinitely.

ONR Conference on CAI Languages Held at Cambridge, Massachusetts, 2-3 March 1966.

ERIC Educational Resources Information Center

Entelek, Inc., Newburyport, MA.

An invitational meeting was held to consider computer-assisted instruction. Topics discussed included the BBM (Bolt, Beranek, Newman, Inc.) Mathematics program and programing languages, such as, Coursewriter, AUTHOR (Automatically Translating Heuristically Organized Routines), and PLATO/CATO (Programed Logic for Automatic Teaching Operations/PLATO…

Unstable solitary-wave solutions of the generalized Benjamin-Bona-Mahony equation

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKinney, W.R.; Restrepo, J.M.; Bona, J.L.

1994-06-01

The evolution of solitary waves of the gBBM equation is investigated computationally. The experiments confirm previously derived theoretical stability estimates and, more importantly, yield insights into their behavior. For example, highly energetic unstable solitary waves when perturbed are shown to evolve into several stable solitary waves.

Stability properties of solitary waves for fractional KdV and BBM equations

NASA Astrophysics Data System (ADS)

Angulo Pava, Jaime

2018-03-01

This paper sheds new light on the stability properties of solitary wave solutions associated with Korteweg-de Vries-type models when the dispersion is very low. Using a compact, analytic approach and asymptotic perturbation theory, we establish sufficient conditions for the existence of exponentially growing solutions to the linearized problem and so a criterium of spectral instability of solitary waves is obtained for both models. Moreover, the nonlinear stability and spectral instability of the ground state solutions for both models is obtained for some specific regimen of parameters. Via a Lyapunov strategy and a variational analysis, we obtain the stability of the blow-up of solitary waves for the critical fractional KdV equation. The arguments presented in this investigation show promise for use in the study of the instability of traveling wave solutions of other nonlinear evolution equations.

High-Rate Field Demonstration of Large-Alphabet Quantum Key Distribution

DTIC Science & Technology

2016-12-13

COW , 2015 This work Figure 4: Comparison of our P&M DO-QKD results to previously published QKD system records, chosen to represent either secure...record for continuous-variable QKD (33). BBM92: secure throughput record for two-dimensional entanglement-based QKD (34). COW : distance record for QKD (19). 15

High-Rate Field Demonstration of Large-Alphabet Quantum Key Distribution

DTIC Science & Technology

2016-12-08

COW , 2015 This work Figure 4: Comparison of our P&M DO-QKD results to previously published QKD system records, chosen to represent either secure...record for continuous-variable QKD (33). BBM92: secure throughput record for two-dimensional entanglement-based QKD (34). COW : distance record for QKD (19). 15

Effect of food wastewater on biomass production by a green microalga Scenedesmus obliquus for bioenergy generation.

PubMed

Ji, Min-Kyu; Yun, Hyun-Shik; Park, Sanghyun; Lee, Hongkyun; Park, Young-Tae; Bae, Sunyoung; Ham, Jungyeob; Choi, Jaeyoung

2015-03-01

Effect of food wastewater (FW) on the biomass, lipid and carbohydrate production by a green microalga Scenedesmus obliquus cultivated in Bold's Basal Medium (BBM) was investigated. Different dilution ratios (0.5-10%) of BBM either with FW or salt solution (NaCl) or sea water (SW) were evaluated. S. obliquus showed the highest growth (0.41 g L(-1)), lipid productivity (13.3 mg L(-1) day L(-1)), carbohydrate productivity (14.7 mg L(-1) day L(-1)) and nutrient removal (38.9 mg TN L(-1) and 12.1 mg TP L(-1)) with 1% FW after 6 days of cultivation. The FW promoted algal autoflocculation due to formation of inorganic precipitates at an alkali pH. Fatty acid methyl ester analysis revealed that the palmitic and oleic acid contents were increased up to 8% with FW. Application of FW improved the growth, lipid/carbohydrate productivity and biomass recovery efficiency of S. obliquus, which can be exploited for cost effective production of microalgae biomass. Copyright © 2014 Elsevier Ltd. All rights reserved.

Inferences of biogeographical histories within subfamily Hyacinthoideae using S-DIVA and Bayesian binary MCMC analysis implemented in RASP (Reconstruct Ancestral State in Phylogenies)

PubMed Central

Ali, Syed Shujait; Yu, Yan; Pfosser, Martin; Wetschnig, Wolfgang

2012-01-01

Background and Aims Subfamily Hyacinthoideae (Hyacinthaceae) comprises more than 400 species. Members are distributed in sub-Saharan Africa, Madagascar, India, eastern Asia, the Mediterranean region and Eurasia. Hyacinthoideae, like many other plant lineages, show disjunct distribution patterns. The aim of this study was to reconstruct the biogeographical history of Hyacinthoideae based on phylogenetic analyses, to find the possible ancestral range of Hyacinthoideae and to identify factors responsible for the current disjunct distribution pattern. Methods Parsimony and Bayesian approaches were applied to obtain phylogenetic trees, based on sequences of the trnL-F region. Biogeographical inferences were obtained by applying statistical dispersal-vicariance analysis (S-DIVA) and Bayesian binary MCMC (BBM) analysis implemented in RASP (Reconstruct Ancestral State in Phylogenies). Key Results S-DIVA and BBM analyses suggest that the Hyacinthoideae clade seem to have originated in sub-Saharan Africa. Dispersal and vicariance played vital roles in creating the disjunct distribution pattern. Results also suggest an early dispersal to the Mediterranean region, and thus the northward route (from sub-Saharan Africa to Mediterranean) of dispersal is plausible for members of subfamily Hyacinthoideae. Conclusions Biogeographical analyses reveal that subfamily Hyacinthoideae has originated in sub-Saharan Africa. S-DIVA indicates an early dispersal event to the Mediterranean region followed by a vicariance event, which resulted in Hyacintheae and Massonieae tribes. By contrast, BBM analysis favours dispersal to the Mediterranean region, eastern Asia and Europe. Biogeographical analysis suggests that sub-Saharan Africa and the Mediterranean region have played vital roles as centres of diversification and radiation within subfamily Hyacinthoideae. In this bimodal distribution pattern, sub-Saharan Africa is the primary centre of diversity and the Mediterranean region is the secondary centre of diversity. Sub-Saharan Africa was the source area for radiation toward Madagascar, the Mediterranean region and India. Radiations occurred from the Mediterranean region to eastern Asia, Europe, western Asia and India. PMID:22039008

Corrigendum to “A new hyperbolic auxiliary function method and exact solutions of the mBBM equation” [Commun Nonlinear Sci Numer Simul 2010;15:135-138

NASA Astrophysics Data System (ADS)

Layeni, Olawanle P.; Akinola, Ade P.

2010-09-01

The symbols w and ω were abused in article [1]. Replacing ξ + ω with ξ throughout the article (that is in Eqs. (5) and (13)-(23)) and afterwards taking w and ω to denote the (same) frequency of the traveling wave(s) set this right.

A novel culture medium designed for the simultaneous enhancement of biomass and lipid production by Chlorella vulgaris UTEX 26.

PubMed

Ramírez-López, Citlally; Chairez, Isaac; Fernández-Linares, Luis

2016-07-01

A novel culture medium to enhance the biomass and lipid production simultaneously by Chlorella vulgaris UTEX 26 was designed in three stages of optimization. Initially, a culture medium was inferred applying the response surface method to adjust six factors [NaNO3, NH4HCO3, MgSO4·7H2O, KH2PO4, K2HPO4 and (NH4)2HPO4], which were selected on the basement of BBM (Bold's Basal Medium) and HAMGM (Highly Assimilable Minimal Growth Medium) culture media. Afterwards, the nitrogen source compound was optimized to reduce both, ammonium and nitrate concentrations. As result of the optimization process, the proposed culture medium improved 40% the biomass (0.73gL(-1)) compared with the BBM medium and 85% the lipid concentration (281mgL(-1)), with respect to HAMGM medium. Some culture media components concentrations were reduced up to 50%. Gas chromatography analysis revealed that C16:0, C18:0, C18:1, C18:2 and C18:3 were the major fatty acids produced by C. vulgaris UTEX 26. Copyright © 2016 Elsevier Ltd. All rights reserved.

On extreme events for non-spatial and spatial branching Brownian motions

NASA Astrophysics Data System (ADS)

Avan, Jean; Grosjean, Nicolas; Huillet, Thierry

2015-04-01

We study the impact of having a non-spatial branching mechanism with infinite variance on some parameters (height, width and first hitting time) of an underlying Bienaymé-Galton-Watson branching process. Aiming at providing a comparative study of the spread of an epidemics whose dynamics is given by the modulus of a branching Brownian motion (BBM) we then consider spatial branching processes in dimension d, not necessarily integer. The underlying branching mechanism is either a binary branching model or one presenting infinite variance. In particular we evaluate the chance p(x) of being hit if the epidemics started away at distance x. We compute the large x tail probabilities of this event, both when the branching mechanism is regular and when it exhibits very large fluctuations.

Na-glutamine co-transporters B(0)AT1 in villus and SN2 in crypts are differentially altered in chronically inflamed rabbit intestine.

PubMed

Saha, Prosenjit; Arthur, Subha; Kekuda, Ramesh; Sundaram, Uma

2012-03-01

Glutamine is a major nutrient utilized by the intestinal epithelium and is primarily assimilated via Na-glutamine co-transport (NGcT) on the brush border membrane (BBM) of enterocytes. Recently we reported that B(0)AT1 (SLC6A19) mediates glutamine absorption in villus while SN2 (SLC38A5) does the same in crypt cells. However, how B(0)AT1 and SN2 are affected during intestinal inflammation is unknown. In the present study it was shown that during chronic enteritis NGcT was inhibited in villus cells, however, it was stimulated in crypt cells. Our studies also demonstrated that the mechanism of inhibition of NGcT during chronic enteritis was secondary to a reduction in the number of B(0)AT1 co-transporters in the villus cell BBM without a change in the affinity of the co-transporter. In contrast, stimulation of NGcT in crypt cells was secondary to an increase in the affinity of SN2 for glutamine without an alteration in the number of co-transporters. Thus, glutamine assimilation which occurs via distinct transporters in crypt and villus cells is altered in the chronically inflamed intestine. Copyright © 2011 Elsevier B.V. All rights reserved.

Mast cell regulation of Na-glutamine co-transporters B0AT1 in villus and SN2 in crypt cells during chronic intestinal inflammation.

PubMed

Singh, Soudamani; Arthur, Subha; Talukder, Jamilur; Palaniappan, Balasubramanian; Coon, Steven; Sundaram, Uma

2015-04-15

In the chronically inflamed rabbit small intestine, brush border membrane (BBM) Na-glutamine co-transport is inhibited in villus cells (mediated by B0AT1), while it is stimulated in crypt cells (mediated by SN2/SNAT5). How mast cells, known to be enhanced in the chronically inflamed intestine, may regulate B0AT1 in villus and SN2/SNAT5 in crypt cell is unknown. Thus, the aim of the present study is to determine the regulation of B0AT1 and SN2/SNAT5 by mast cells during chronic enteritis. Chronic intestinal inflammation was induced in male rabbits with intra-gastric inoculation of Eimeria magna oocytes. Rabbits with chronic inflammation were treated with ketotifen (10 mg/day) or saline (Placebo) for 2 days. Villus and crypts cells were isolated from the rabbit intestine using the Ca++ chelation technique. Na/K-ATPase activity was measured as Pi from cellular homogenate. BBM vesicles (BBMV) were prepared from villus and crypt cells and uptake studies were performed using rapid filtration technique with (3)H-Glutamine. Western blot analyses were done using B0AT1 and SN2 specific antibodies. In villus cells, Na-glutamine co-transport inhibition observed during inflammation was completely reversed by ketotifen, a mast cell stabilizer. In contrast, in crypt cells, Na-glutamine co-transport stimulation was reversed to normal levels by ketotifen. Kinetic studies demonstrated that ketotifen reversed the inhibition of B0AT1 in villus cells by restoring co-transporter numbers in the BBM, whereas the stimulation of SN2/SNAT5 in crypts cells was reversed secondary to restoration of affinity of the co-transporter. Western blot analysis showed that ketotifen restored immune-reactive levels of B0AT1 in villus cells, while SN2/SNAT5 levels from crypts cell remained unchanged. In the present study we demonstrate that mast cells likely function as a common upstream immune pathway regulator of the Na-dependent glutamine co-transporters, B0AT1 in villus cells and SN2 in crypts cells that are uniquely altered in the chronically inflamed small intestine.

Landfill leachate--a water and nutrient resource for algae-based biofuels.

PubMed

Edmundson, Scott J; Wilkie, Ann C

2013-01-01

There is a pressing need for sustainable renewable fuels that do not negatively impact food and water resources. Algae have great potential for the production of renewable biofuels but require significant water and fertilizer resources for large-scale production. Municipal solid waste (MSW) landfill leachate (LL) was evaluated as a cultivation medium to reduce both water and elemental fertilizer demands of algae cultivation. Daily growth rate and cell yield of two isolated species of algae (Scenedesmus cf. rubescens and Chlorella cf. ellipsoidea) were cultivated in MSW LL and compared with Bold's Basal Medium (BBM). Results suggest that LL can be used as a nutrient resource and medium for the cultivation of algae biomass. S. cf. rubescens grew well in 100% LL, when pH was regulated, with a mean growth rate and cell yield 91.2% and 92.8% of those observed in BBM, respectively. S. cf. rubescens was more adaptable than C. cf. ellipsoidea to the LL tested. The LL used in this study supported a maximum volumetric productivity of 0.55 g/L/day of S. cf. rubescens biomass. The leachate had sufficient nitrogen to supply 17.8 g/L of algae biomass, but was limited by total phosphorus. Cultivation of algae on LL offsets both water and fertilizer consumption, reducing the environmental footprint and increasing the potential sustainability of algae-based biofuels.

Subduction-related prograde metamorphism of the ultramafic members of the Central-Sudetic Ophiolite (SW Poland)

NASA Astrophysics Data System (ADS)

Wojtulek, Piotr; Puziewicz, Jacek; Ntaflos, Theodoros

2016-04-01

The Central-Sudetic Ophiolite (CSO) consists of Ślęża (SM), Braszowice-Brzeźnica (BBM), Szklary (SZM) and Nowa Ruda massifs. Ultramafic rocks occurring in ŚM, BBM and SM have MgO/SiO2 (0.82-1.20) and Al2O3/SiO2 (~0.01) ratios typical for serpentinized mantle peridotites. They are enriched in Cs, Pb and Sb and depleted in Rb, Ba, Nb, La, Ce, Sr, Zr, Er and Y relative to primitive mantle. The serpentinites are antigorite ones, pseudomorphic chrysotile varieties occur sparsely. Serpentinites from each massif contain specific non-serpentine phases. Ślęża serpentinites contain primary olivine-chromite aggregates, olivine and clinopyroxene aggregates interpreted as basaltic melt percolation phases, secondary olivine with magnetite inclusions (locally with cleavage) and secondary microcrystalline olivine-clinopyroxene-magnetite aggregates ("brownish aggregates") with bastite and mesh textures. The BBM serpentinites contain primary olivine-chromite aggregates, primary diopside grains, secondary magnetite-bearing olivine and tremolite. The SZM serpentinites contain olivine, tremolite and enstatite grains. Enstatite (Mg# = 92.8-93.0) contains >0.2 wt.% Cr2O3 and >0.7 Al2O3. All secondary non-serpentine phases are intergrown by antigorite. Very low overall trace element contents, Cs and high Pb-Sb anomalies of the CSO serpentinites are similar to subduction zone related serpentinites not affected by later fluid refertilization. Mineral assemblages shows prograde alteration of the rocks: (1) low-T serpentinization I forming pseudomorphic lizardite-chrysotile serpentinites; (2) antigorite recrystallization; (3) deserpentinization forming secondary olivine with magnetite inclusions, "brownish structures", tremolite and/or enstatite; (4) high-T serpentinization II forming antigorite intergrowths. Alteration degree is different in each massif: rocks from the SM are the most altered, they contain antigorite-olivine-enstatite-tremolite assemblage typical for temperatures ~680-780°C. The BBM serpentinites have mineral assemblage (antigorite-olivine-diopside-tremolite) typical for ~420-490°C and the ŚM rocks containing antigorite-olivine-diopside were altered at ~380-460°C (cf. phase diagram based on Berman et al., 1986). Similar mineral succession indicative for prograde metamorphism of serpentinites is typical for alteration in subduction zone setting and occurs in serpentinites from the Lanzo Massif in Alps (Debret et al., 2013) and in the mantle wedge serpentinites from Guatemala (Kodolanyi et al., 2012). This abstract was prepared as a part of the project of the National Science Centre of Poland ("Evolution of serpentinic members of the Lower Silesia ophiolites", DEC-2012/07/N/ST10/03934). References Berman, R. G., Engi, M., Greenwood, H. J., Brown, T. H., 1986. Derivation of internally-consistent thermodynamic data by the technique of mathematical programming: a review with application to the system MgO-SiO2-H2O. Journal of Petrology 27, 1331-1364. Debret, B., Nicollet, C., Schwartz, S., Andreani, M., Godard, M., 2013. Three steps of serpentinization in an eclogitized oceanic serpentinization front (Lanzo Massif - Western Alps). Journal of Metamorphic Geology 31, 65 - 186. Kodolányi, J., Pettke, T., Spandler, C., Kamber, B.S. and Gméling, K., 2012. Geochemistry of ocean floor and forearc serpentinites: Constraints on the ultramafic input to subduction zones. Journal of Petrology 53, 235-270.

Can the Short-Term Toxicity of Water-Soluble Jet Fuel Hydrocarbons Produce Long-Lasting Effects in Lake Plankton Communities?

DTIC Science & Technology

1983-09-01

Richard Starr Algal collection or Ankistrodesmus sp. or Chlorella sp. from the Carolina Biological collection. The cultures were unialgal but not... Chlorella were grown in BBM medium. After five days ot growth, half ot the flasks (3) for each species were spiked with 0.1 ml of toluene. The , .. flasks...quickly recovered and grew at rates equa’ the = toluene-free cells, finally reaching the same final biomass. Ankistrodesmus and Chlorella however

Assessment of Environmental Flows for the Rivers of Western Ganges Delta with Special Reference to Indian Sundarban

NASA Astrophysics Data System (ADS)

Bhadra, T.; Hazra, S.; Ghosh, S.; Barman, B. C.

2016-12-01

The Indian Sundarban, situated on the western tide-dominated part of the Ganges delta was formed by the sedimentation of the Ganges and its tributaries. Freshwater is a scarce resource in the Sundarban though it is traversed by rivers. Most of the rivers of Western Ganges Delta, which used to nourish the Sundarban, have become defunct with the passage of time. To ensure sustainable flow and to enhance the flow-dependent ecosystem services in this region, assessment of environmental flows within the system is required. A pilot assessment of environment flows, supported by IUCN has been carried out in some specific river reaches of Western Ganges Delta under the present study. The holistic Building Block Methodology (BBM) has been modified and used for the assessment of environmental flows. In the modified BBM, three distinctive blocks namely Hydro-Morphology, Ecology and Socio-Economy have been selected and indicators like Ganges Dolphin (Platanista gangetica), Sundari tree (Heritiera fomes) and Hilsa fish (Tenualosa ilisha) etc. have been determined to assess the environmental flows. As the discharge data of the selected rivers are restricted in the public domain, the SWAT model has been run to generate the discharge data of the classified rivers. The Hydraulic model, HEC-RAS has been calibrated in the selected River reaches to assess the habitat availability and its changes for indicator species under different flow condition. The study reveals that River Bhagirathi-Hugli requires 150-427 cumec additional water in monsoon and 850-1127 cumec additional water in post-monsoon months for Hilsa migration, whereas 327-486 cumec additional water in pre-monsoon and dry season and 227-386 cumec additional water in post-monsoon months are required for Dolphin movement. Flow requirement of river Ichhamati has also been estimated under the present study. The total required flow for the Sundarban ecosystem to reduce the salinity level from 30ppt to 14ppt during the dry and pre-monsoon months has been estimated as 1700 cumec. The pilot study observes that the present level of flow in the river systems is inadequate to sustain the ecosystem function and the in-stream flow requirement is more than the presently available flow. Keyword: Building Block Methodology, Environmental Flows, HEC-RAS, Indian Sundarban, SWAT.

Cell-specific effects of luminal acid, bicarbonate, cAMP, and carbachol on transporter trafficking in the intestine

PubMed Central

Jakab, Robert L.; Collaco, Anne M.

2012-01-01

Changes in intestinal luminal pH affect mucosal ion transport. The aim of this study was to compare how luminal pH and specific second messengers modulate the membrane traffic of four major ion transporters (CFTR, NHE3, NKCC1, and NBCe1) in rat small intestine. Ligated duodenal, jejunal, and ileal segments were infused with acidic or alkaline saline, 8-Br-cAMP, or the calcium agonist carbachol in vivo for 20 min. Compared with untreated intestine, lumen pH was reduced after cAMP or carbachol and increased following HCO3−-saline. Following HCl-saline, lumen pH was restored to control pH levels. All four secretory stimuli resulted in brush-border membrane (BBM) recruitment of CFTR in crypts and villi. In villus enterocytes, CFTR recruitment was coincident with internalization of BBM NHE3 and basolateral membrane recruitment of the bicarbonate transporter NBCe1. Both cAMP and carbachol recruited NKCC1 to the basolateral membrane of enterocytes, while luminal acid or HCO3− retained NKCC1 in intracellular vesicles. Luminal acid resulted in robust recruitment of CFTR and NBCe1 to their respective enterocyte membrane domains in the upper third of the villi; luminal HCO3− induced similar membrane changes lower in the villi. These findings indicate that each stimulus promotes a specific transporter trafficking response along the crypt-villus axis. This is the first demonstration that physiologically relevant secretory stimuli exert their actions in villus enterocytes by membrane recruitment of CFTR and NBCe1 in tandem with NHE3 internalization. PMID:22936272

Cell-specific effects of luminal acid, bicarbonate, cAMP, and carbachol on transporter trafficking in the intestine.

PubMed

Jakab, Robert L; Collaco, Anne M; Ameen, Nadia A

2012-10-15

Changes in intestinal luminal pH affect mucosal ion transport. The aim of this study was to compare how luminal pH and specific second messengers modulate the membrane traffic of four major ion transporters (CFTR, NHE3, NKCC1, and NBCe1) in rat small intestine. Ligated duodenal, jejunal, and ileal segments were infused with acidic or alkaline saline, 8-Br-cAMP, or the calcium agonist carbachol in vivo for 20 min. Compared with untreated intestine, lumen pH was reduced after cAMP or carbachol and increased following HCO(3)(-)-saline. Following HCl-saline, lumen pH was restored to control pH levels. All four secretory stimuli resulted in brush-border membrane (BBM) recruitment of CFTR in crypts and villi. In villus enterocytes, CFTR recruitment was coincident with internalization of BBM NHE3 and basolateral membrane recruitment of the bicarbonate transporter NBCe1. Both cAMP and carbachol recruited NKCC1 to the basolateral membrane of enterocytes, while luminal acid or HCO(3)(-) retained NKCC1 in intracellular vesicles. Luminal acid resulted in robust recruitment of CFTR and NBCe1 to their respective enterocyte membrane domains in the upper third of the villi; luminal HCO(3)(-) induced similar membrane changes lower in the villi. These findings indicate that each stimulus promotes a specific transporter trafficking response along the crypt-villus axis. This is the first demonstration that physiologically relevant secretory stimuli exert their actions in villus enterocytes by membrane recruitment of CFTR and NBCe1 in tandem with NHE3 internalization.

The non-serpentine phases in serpentinites from the Braszowice-Brzeźnica Massif (SW Poland) as traces of magmatic processes within oceanic mantle

NASA Astrophysics Data System (ADS)

Wojtulek, Piotr; Puziewicz, Jacek; Ntaflos, Theodoros

2016-04-01

The Braszowice-Brzeźnica Massif - BBM (SW Poland) is a part of the Variscan Central-Sudetic Ophiolite. It is located at the southern termination of the Niemcza Shear Zone and consists of gabbros and serpentinites. The ultramafic rocks occurring in the BBM are (from E to W) serpentinites with abundant relics of olivine and tremolite, lizardite-chrysotile serpentinites and antigorite serpentinites. Clinopyroxene, olivine and zoned chromite grains were found in the central part of the BBM (Mnich Hill) within antigoritic serpentinites. The non-serpentine phases occur in the following microstructures: (1) olivine-chromite aggregates: olivine (Fo = 90.0-91.0) contains 0.35-0.44 wt.% NiO, elongated or amaeboidal chromite I (Cr# = 0.49-0.50, TiO2 = 0.14-0.15 wt.%) is rimmed by chromite II (Cr# = 0.98, TiO2 = 0.01 wt.%); (2) coarse and dismembered diopside grains (Cpx I, Mg# = 0.91-0.92) containing 0.70-0.80 wt.% TiO2, 3.0-4.0 wt.% Al2O3, 1.0-1.4 Cr2O3 and 0.3-0.5 wt.% Na2O; Cpx I is enriched in REE relative to primitive mantle, the REE pattern reveals HREE enrichment relative to LREE and negative Eu anomaly; (3) olivine-clinopyroxene aggregates: olivine (Fo = 90.4-91.3) contains 0.27-0.35 wt.% NiO, anhedral, often elongated clinopyroxene (Cpx II, Mg# = 0.91-0.92) has <0.1 wt.% TiO2, 3.00-4.00 wt.% Al2O3, 1.00-1.40 Cr2O3 and <0.20 wt.% Na2O, (4) magnetite-bearing olivine grains, locally in aggregates with minute clinopyroxene ones; olivine has variable Fo (86.0-96.0) and NiO concentration (0.02-0.55 wt.%), clinopyroxene (Cpx III, Mg# = 0.93-0.97) contains <0.40 wt.% Al2O3 and <0.20 Cr2O3. Cpx III rims also locally Cpx II. The non-serpentine phases from the BBM massif have various compositions and mode of occurrence, thus they record various crystallization events. Composition of chromite I is similar to primary chromite grains occurring in oceanic peridotites of the Romanche and Kurchatov F.Z. (Dick and Bullen, 1984), thus the olivine-chromite aggregates represent probably primary mantle phases. Cpx I contains similar amount of the Al2O3, Cr2O3 and Na2O to primary diopsides described from the Marie Celeste FZ and Indomed FZ (Johnson et al., 1990). REE pattern of the Cpx I suggests depletion in mobile trace elements due to melt extraction. Cpx II has Al2O3, Cr2O3 and TiO2 contents similar to those of diopside originated from the melt-percolation reactions, olivine coexisting with Cpx II crystallized probably in the same event. The Cpx III has Al, Cr and Na contents typical for secondary, metamorphic clinopyroxene. Magnetite-bearing olivine is similar to olivine crystallized at expense of serpentine+magnetite precursors, thus is has secondary, metamorphic origin. This abstract was prepared as a part of the project of the National Science Centre of Poland ("Evolution of serpentinic members of the Lower Silesia ophiolites", DEC-2012/07/N/ST10/03934). References Dick, H.J.B., Bullen, T., 1984. Chromian spinel as a petrogenetic indicator in abyssal and alpine-type peridotites and spatially associated lavas. Contributions to Mineralogy and Petrology 86, 54-76. Johnson K.T.M., Dick H.J.B., Shimizu N., 1990. Melting in the Oceanic Upper Mantle - an ion microprobe study of Diopsides in Abyssal Peridotites. Journal of Geophysical Research 95, 2661-2678.

Interim-Night Integrated Goggle Head Tracking System (I-Nights). Volume 1. Ground Test Summary

DTIC Science & Technology

1992-08-01

A/WDP _ DATE: I COORDINATION: NWC 04_______ DATE: 7914401 COORDINATION: USD/ YAGO DATE:9 4/ APPROVED BY: ESD/YAff-1DST j T [!1! / 624 TABLE OF CONTENTS...B/U YAGO ) Voltmeter 1 NWC Voltage Standard 1 NWC (CAL Lab) Soldering Iron 1 NWC O-Scope 1 NWC LPU-9D Life Preserver/ Surv. Vest 1 YAGO G-Suit (Large...1 YAGO Large Flight Boots 1 YAGO Ex-Large Flight Suit 1 YAGO ADAM #12 (Large) I Holloman ADAM I-NIGHTS Liners 3 (1 per vendor) AAMRL/BBM 5% Hybrid

Loss of PDZ-adaptor protein NHERF2 affects membrane localization and cGMP- and [Ca2+]- but not cAMP-dependent regulation of Na+/H+ exchanger 3 in murine intestine

PubMed Central

Chen, Mingmin; Sultan, Ayesha; Cinar, Ayhan; Yeruva, Sunil; Riederer, Brigitte; Singh, Anurag Kumar; Li, Junhua; Bonhagen, Janina; Chen, Gang; Yun, Chris; Donowitz, Mark; Hogema, Boris; deJonge, Hugo; Seidler, Ursula

2010-01-01

Trafficking and regulation of the epithelial brush border membrane (BBM) Na+/H+ exchanger 3 (NHE3) in the intestine involves interaction with four different members of the NHERF family in a signal-dependent and possibly segment-specific fashion. The aim of this research was to study the role of NHERF2 (E3KARP) in intestinal NHE3 BBM localization and second messenger-mediated and receptor-mediated inhibition of NHE3. Immunolocalization of NHE3 in WT mice revealed predominant microvillar localization in jejunum and colon, a mixed distribution in the proximal ileum but localization near the terminal web in the distal ileum. The terminal web localization of NHE3 in the distal ileum correlated with reduced acid-activated NHE3 activity (fluorometrically assessed). NHERF2 ablation resulted in a shift of NHE3 to the microvilli and higher basal fluid absorption rates in the ileum, but no change in overall NHE3 protein or mRNA expression. Forskolin-induced NHE3 inhibition was preserved in the absence of NHERF2, whereas Ca2+ ionophore- or carbachol-mediated inhibition was abolished. Likewise, Escherichia coli heat stable enterotoxin peptide (STp) lost its inhibitory effect on intestinal NHE3. It is concluded that in native murine intestine, the NHE3 adaptor protein NHERF2 plays important roles in tethering NHE3 to a position near the terminal web and in second messenger inhibition of NHE3 in a signal- and segment-specific fashion, and is therefore an important regulator of intestinal fluid transport. PMID:20962002

Sulfate-bicarbonate exchange in brush-border membranes from rat renal cortex

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pritchard, J.B.

1987-02-01

Under Na/sup +/-free conditions /sup 35/SO/sub 4//sup 2 -/ uptake by rat renal brush-border membrane (BBM) vesicles could be driven by imposition of a HCO/sup -//sub 3/ gradient (in greater than out). The initial rate of /sup 35/SO/sub 4//sup 2 -/ uptake was stimulated 10-fold, and peak overshoot exceeded equilibrium uptake by 2-3 times. Cl/sup -/, SCN/sup -/, NO/sub 3//sup -/, I/sup -/, and OH/sup -/ were able to substitute for HCO/sub 3//sup -/. Divalent anions, including /sup 35/SO/sub 4//sup 2 -/ itself, were less effective as counterions. HCO/sub 3//sup -/-SO/sub 4//sup 2 -/ exchange was cis-inhibited by disulfonic stilbenes,more » ((SITS)(DIDS)), phloretin, Hg, and S/sub 2/O/sub 3//sup 2 -/. HCO/sub 3//sup -/-driven /sup 35/SO/sub 4//sup 2 -/ uptake was saturable, with an apparent K/sub m/ of 0.4 mM for SO/sub 4//sup 2 -/. Simultaneous imposition of Na/sup +/ and HCO/sub 3//sup -/ gradients produced approximately additive stimulation of /sup 35/SO/sub 4//sup 2 -/ uptake. The HCO/sub 3//sup -/-driven component of /sup 35/SO/sub 4//sup 2 -/ uptake, but not the component driven by Na/sup +/, was inhibited by SITS. Finally, Na/sup +/-driven SO/sub 4//sup 2 -/ accumulation could be reduced by imposing an out greater than in HCO/sub 3//sup +/ gradient, conditions accelerating exchange driven SO/sub 4//sup 2 -/ efflux. These findings indicate the presence of separate Na/sup +/-SO/sub 4//sup 2 -/ cotransport and SO /sub 4//sup 2 -/-anion exchange pathways in the same BBM vesicles.« less

Modelling chemo-hydro-mechanical behaviour of unsaturated clays: a feasibility study

NASA Astrophysics Data System (ADS)

Liu, Z.; Boukpeti, N.; Li, X.; Collin, F.; Radu, J.-P.; Hueckel, T.; Charlier, R.

2005-08-01

Effective capabilities of combined chemo-elasto-plastic and unsaturated soil models to simulate chemo-hydro-mechanical (CHM) behaviour of clays are examined in numerical simulations through selected boundary value problems. The objective is to investigate the feasibility of approaching such complex material behaviour numerically by combining two existing models. The chemo-mechanical effects are described using the concept of chemical softening consisting of reduction of the pre-consolidation pressure proposed originally by Hueckel (Can. Geotech. J. 1992; 29:1071-1086; Int. J. Numer. Anal. Methods Geomech. 1997; 21:43-72). An additional chemical softening mechanism is considered, consisting in a decrease of cohesion with an increase in contaminant concentration. The influence of partial saturation on the constitutive behaviour is modelled following Barcelona basic model (BBM) formulation (Géotech. 1990; 40(3):405-430; Can. Geotech. J. 1992; 29:1013-1032).The equilibrium equations combined with the CHM constitutive relations, and the governing equations for flow of fluids and contaminant transport, are solved numerically using finite element. The emphasis is laid on understanding the role that the individual chemical effects such as chemo-elastic swelling, or chemo-plastic consolidation, or finally, chemical loss of cohesion have in the overall response of the soil mass. The numerical problems analysed concern the chemical effects in response to wetting of a clay specimen with an organic liquid in rigid wall consolidometer, during biaxial loading up to failure, and in response to fresh water influx during tunnel excavation in swelling clay.

Kinetic Model of Photoautotrophic Growth of Chlorella sp. Microalga, Isolated from the Setúbal Lagoon.

PubMed

Heinrich, Josué Miguel; Irazoqui, Horacio Antonio

2015-01-01

In this work, a kinetic expression relating light availability in the culture medium with the rate of microalgal growth is obtained. This expression, which is valid for low illumination conditions, was derived from the reactions that take part in the light-dependent stage of photosynthesis. The kinetic expression obtained is a function of the biomass concentration in the culture, as well as of the local volumetric rate of absorption of photons, and only includes two adjustable parameters. To determine the value of these parameters and to test the validity of the hypotheses made, autotrophic cultures of the Chlorella sp. strain were carried out in a modified BBM medium at three CO2 concentrations in the gas stream, namely 0.034%, 0.34% and 3.4%. Moreover, the local volumetric rate of photon absorption was predicted based on a physical model of the interaction of the radiant energy with the suspended biomass, together with a Monte Carlo simulation algorithm. The proposed intrinsic expression of the biomass growth rate, together with the Monte Carlo radiation field simulator, are key to scale up photobioreactors when operating under low irradiation conditions, independently of the configuration of the reactor and of its light source. © 2015 The American Society of Photobiology.

Ectopic expression of the Coffea canephora SERK1 homolog-induced differential transcription of genes involved in auxin metabolism and in the developmental control of embryogenesis.

PubMed

Pérez-Pascual, Daniel; Jiménez-Guillen, Doribet; Villanueva-Alonzo, Hernán; Souza-Perera, Ramón; Godoy-Hernández, Gregorio; Zúñiga-Aguilar, José Juan

2018-04-01

Somatic embryogenesis receptor-like kinase 1 (SERK1) is a membrane receptor that might serve as common co-regulator of plant cell differentiation processes by forming heterodimers with specific receptor-like kinases. The Coffea canephora SERK1 homolog (CcSERK1) was cloned in this work, and its early function in the transcription of embryogenesis master genes and of genes encoding proteins involved in auxin metabolism was investigated by externally manipulating its expression in embryogenic leaf explants, before the appearance of embryogenic structures. Overexpression of CcSERK1 early during embryogenesis caused an increase in the number of somatic embryos when the 55-day process was completed. Suppression of CcSERK1 expression by RNA interference almost abolished somatic embryogenesis. Real time-PCR experiments revealed that the transcription of the CcAGL15, CcWUS, CcBBM, CcPKL, CcYUC1, CcPIN1 and CcPIN4 homologs was modified in direct proportion to the expression of CcSERK1 and that only CcLEC1 was inversely affected by the expression levels of CcSERK1. The expression of the CcYUC4 homolog was induced to more than 80-fold under CcSERK1 overexpression conditions, but it was also induced when CcSERK1 expression was silenced. The level of CcTIR1 was not affected by CcSERK1 overexpression but was almost abolished during CcSERK1 silencing. These results suggest that CcSERK1 co-regulates the induction of somatic embryogenesis in Coffea canephora by early activation of YUC-dependent auxin biosynthesis, auxin transport mediated by PIN1 and PIN4, and probably auxin perception by the TIR1 receptor, leading to the induction of early-stage homeotic genes (CcAGL15, CcWUS, CcPKL and CcBBM) and repression of late-stage homeotic genes (CcLec1). © 2018 Scandinavian Plant Physiology Society.

Saccharomyces boulardii Protease Inhibits the Effects of Clostridium difficile Toxins A and B in Human Colonic Mucosa

PubMed Central

Castagliuolo, Ignazio; Riegler, Martin F.; Valenick, Leyla; LaMont, J. Thomas; Pothoulakis, Charalabos

1999-01-01

Saccharomyces boulardii is a nonpathogenic yeast used in the treatment of Clostridium difficile diarrhea and colitis. We have reported that S. boulardii inhibits C. difficile toxin A enteritis in rats by releasing a 54-kDa protease which digests the toxin A molecule and its brush border membrane (BBM) receptor (I. Castagliuolo, J. T. LaMont, S. T. Nikulasson, and C. Pothoulakis, Infect. Immun. 64:5225–5232, 1996). The aim of this study was to further evaluate the role of S. boulardii protease in preventing C. difficile toxin A enteritis in rat ileum and determine whether it protects human colonic mucosa from C. difficile toxins. A polyclonal rabbit antiserum raised against purified S. boulardii serine protease inhibited by 73% the proteolytic activity present in S. boulardii conditioned medium in vitro. The anti-protease immunoglobulin G (IgG) prevented the action of S. boulardii on toxin A-induced intestinal secretion and mucosal permeability to [3H]mannitol in rat ileal loops, while control rabbit IgG had no effect. The anti-protease IgG also prevented the effects of S. boulardii protease on digestion of toxins A and B and on binding of [3H]toxin A and [3H]toxin B to purified human colonic BBM. Purified S. boulardii protease reversed toxin A- and toxin B-induced inhibition of protein synthesis in human colonic (HT-29) cells. Furthermore, toxin A- and B-induced drops in transepithelial resistance in human colonic mucosa mounted in Ussing chambers were reversed by 60 and 68%, respectively, by preexposing the toxins to S. boulardii protease. We conclude that the protective effects of S. boulardii on C. difficile-induced inflammatory diarrhea in humans are due, at least in part, to proteolytic digestion of toxin A and B molecules by a secreted protease. PMID:9864230

Role of rat sodium/phosphate cotransporters in the cell membrane transport of arsenate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Villa-Bellosta, Ricardo; Sorribas, Victor

2008-10-01

Inorganic arsenate (As{sup V}) is a common contaminant of underground water. Following oral exposure, it is assumed that As{sup V} is distributed and crosses cell membranes through inorganic phosphate (Pi) transporters. We have tested this hypothesis by studying the inhibition of rat Na/Pi cotransporters by As{sup V} in Xenopus laevis oocytes and in several rat tissues. The ubiquitously expressed type III Pi transporters (PiT-1 and PiT-2) showed a low affinity for As{sup V} (K{sub i} {approx} 3.8 mM), similar to the Pi transport system in aortic vascular smooth muscle cells (K{sub i} 1.5 mM). The type II renal isoforms, NaPi-IIamore » and NaPi-IIc, were also poorly inhibited by As{sup V} (K{sub i} {approx} 1 mM), similar to the Pi transport from kidney cortex brush-border membrane (BBM) vesicles. Conversely, the high-affinity intestinal transporter, NaPi-IIb, was very efficiently inhibited with a K{sub i} of 51 {mu}M, similar to the Pi transport from intestinal BBM vesicles. Taking into account the 1.1 mM Pi in blood and renal ultrafiltrate, and the nanomolar range of As{sup V} exposures, we have determined that the contribution by Na/Pi cotransporters to As{sup V} membrane transport is negligible, given that 10-15 mM As{sup V} would be necessary in these fluids to be significantly transported. Intestinal transport is an exception, because Pi competition is weak, thereby considering that its concentration in lumen mainly depends on low Pi levels from ingested fresh water, and because As{sup V} very efficiently inhibits Pi intestinal transport. Our data agree with current toxicokinetic knowledge, and they explain the asymmetric excretion of trivalent and pentavalent arsenic species into bile and urine.« less

Comparative Analyses of Three Chlorella Species in Response to Light and Sugar Reveal Distinctive Lipid Accumulation Patterns in the Microalga C. sorokiniana

PubMed Central

Barnes, Austin; Noel, Eric A.; Betenbaugh, Michael J.; Oyler, George A.

2014-01-01

While photosynthetic microalgae, such as Chlorella, serve as feedstocks for nutritional oils and biofuels, heterotrophic cultivation can augment growth rates, support high cell densities, and increase triacylglycerol (TAG) lipid content. However, these species differ significantly in their photoautotrophic and heterotrophic characteristics. In this study, the phylogeny of thirty Chlorella strains was determined in order to inform bioprospecting efforts and detailed physiological assessment of three species. The growth kinetics and lipid biochemistry of C. protothecoides UTEX 411, C. vulgaris UTEX 265, and C. sorokiniana UTEX 1230 were quantified during photoautotrophy in Bold's basal medium (BBM) and heterotrophy in BBM supplemented with glucose (10 g L−1). Heterotrophic growth rates of UTEX 411, 265, and 1230 were found to be 1.5-, 3.7-, and 5-fold higher than their respective autotrophic rates. With a rapid nine-hour heterotrophic doubling time, Chlorella sorokiniana UTEX 1230 maximally accumulated 39% total lipids by dry weight during heterotrophy compared to 18% autotrophically. Furthermore, the discrete fatty acid composition of each strain was examined in order to elucidate lipid accumulation patterns under the two trophic conditions. In both modes of growth, UTEX 411 and 265 produced 18∶1 as the principal fatty acid while UTEX 1230 exhibited a 2.5-fold enrichment in 18∶2 relative to 18∶1. Although the total lipid content was highest in UTEX 411 during heterotrophy, UTEX 1230 demonstrated a two-fold increase in its heterotrophic TAG fraction at a rate of 28.9 mg L−1 d−1 to reach 22% of the biomass, corresponding to as much as 90% of its total lipids. Interestingly, UTEX 1230 growth was restricted during mixotrophy and its TAG production rate was suppressed to 18.2 mg L−1 d−1. This constraint on carbon flow raises intriguing questions about the impact of sugar and light on the metabolic regulation of microalgal lipid biosynthesis. PMID:24699196

Comparative analyses of three Chlorella species in response to light and sugar reveal distinctive lipid accumulation patterns in the Microalga C. sorokiniana.

PubMed

Rosenberg, Julian N; Kobayashi, Naoko; Barnes, Austin; Noel, Eric A; Betenbaugh, Michael J; Oyler, George A

2014-01-01

While photosynthetic microalgae, such as Chlorella, serve as feedstocks for nutritional oils and biofuels, heterotrophic cultivation can augment growth rates, support high cell densities, and increase triacylglycerol (TAG) lipid content. However, these species differ significantly in their photoautotrophic and heterotrophic characteristics. In this study, the phylogeny of thirty Chlorella strains was determined in order to inform bioprospecting efforts and detailed physiological assessment of three species. The growth kinetics and lipid biochemistry of C. protothecoides UTEX 411, C. vulgaris UTEX 265, and C. sorokiniana UTEX 1230 were quantified during photoautotrophy in Bold's basal medium (BBM) and heterotrophy in BBM supplemented with glucose (10 g L-1). Heterotrophic growth rates of UTEX 411, 265, and 1230 were found to be 1.5-, 3.7-, and 5-fold higher than their respective autotrophic rates. With a rapid nine-hour heterotrophic doubling time, Chlorella sorokiniana UTEX 1230 maximally accumulated 39% total lipids by dry weight during heterotrophy compared to 18% autotrophically. Furthermore, the discrete fatty acid composition of each strain was examined in order to elucidate lipid accumulation patterns under the two trophic conditions. In both modes of growth, UTEX 411 and 265 produced 18:1 as the principal fatty acid while UTEX 1230 exhibited a 2.5-fold enrichment in 18:2 relative to 18:1. Although the total lipid content was highest in UTEX 411 during heterotrophy, UTEX 1230 demonstrated a two-fold increase in its heterotrophic TAG fraction at a rate of 28.9 mg L(-1) d(-1) to reach 22% of the biomass, corresponding to as much as 90% of its total lipids. Interestingly, UTEX 1230 growth was restricted during mixotrophy and its TAG production rate was suppressed to 18.2 mg L-1 d-1. This constraint on carbon flow raises intriguing questions about the impact of sugar and light on the metabolic regulation of microalgal lipid biosynthesis.

Design of the Wind Tunnel Model Communication Controller Board. Degree awarded by Christopher Newport Univ. on Dec. 1998

NASA Technical Reports Server (NTRS)

Wilson, William C.

1999-01-01

The NASA Langley Research Center's Wind Tunnel Reinvestment project plans to shrink the existing data acquisition electronics to fit inside a wind tunnel model. Space limitations within a model necessitate a distributed system of Application Specific Integrated Circuits (ASICs) rather than a centralized system based on PC boards. This thesis will focus on the design of the prototype of the communication Controller board. A portion of the communication Controller board is to be used as the basis of an ASIC design. The communication Controller board will communicate between the internal model modules and the external data acquisition computer. This board is based around an Field Programmable Gate Array (FPGA), to allow for reconfigurability. In addition to the FPGA, this board contains buffer Random Access Memory (RAM), configuration memory (EEPROM), drivers for the communications ports, and passive components.

What Makes School Boards Effective?

ERIC Educational Resources Information Center

Zeigler, L. Harmon

Two models may be used to describe school board governance. The democratic model defines effectiveness in terms of democratic criteria. It is characterized by vigorous competition for school board positions; board members are responsive to their constituencies; the superintendent acts as policy implementor rather than policy originator, and a…

Essential Leadership: School Boards in New York State. A Position Paper.

ERIC Educational Resources Information Center

New York State School Boards Association, Albany.

For effective schools, leadership is vital. As the structure of American education evolved, a model of how a local school board should function emerged. The model is briefly summarized and research on educational leadership, challenges of school board service in New York State, and responsibilities of school boards are discussed. Key leadership…

CO2 emissions from the 2010 Russian wildfires using GOSAT data.

PubMed

Guo, Meng; Li, Jing; Xu, Jiawei; Wang, Xiufeng; He, Hongshi; Wu, Li

2017-07-01

In the summer of 2010, more than 6 hundred wildfires broke out in western Russia because of an unprecedented intense heat wave that resulted from strong atmospheric blocking. The present study evaluated the CO 2 emissions using GOSAT (Greenhouse gases Observing SATellite) data from July 23 to August 18, 2010 for western Russia. The results demonstrated that the GOSAT CAI (Cloud and Aerosol Imager) was well-suited for the identification of smoke plumes and that the GOSAT FTS (Fourier-Transform Spectrometer) TIR (Thermal InfraRed) could be used to calculate the height of the plumes at approximately 800 hPa (1.58 km). Using GOSAT data, we estimated that the 2010 fires in western Russia emitted 255.76 Tg CO 2 . We also calculated the CO 2 emissions by employing the Biomass Burning Model (BBM) for the same study site and obtained a similar result of 261.82-302.48 Tg CO 2 . The present study proposes a new method for the evaluation of CO 2 emissions from a wildfire using remote sensing data, which could be used to improve the knowledge of the burning of biomass at a regional or a continental scale, to reduce the uncertainties in modeling greenhouse gases emissions, and to further understand how wildfires impact the atmospheric carbon cycle and global warming. Copyright © 2017 Elsevier Ltd. All rights reserved.

Nonlinear finite element modeling of corrugated board

Treesearch

A. C. Gilchrist; J. C. Suhling; T. J. Urbanik

1999-01-01

In this research, an investigation on the mechanical behavior of corrugated board has been performed using finite element analysis. Numerical finite element models for corrugated board geometries have been created and executed. Both geometric (large deformation) and material nonlinearities were included in the models. The analyses were performed using the commercial...

Effect of deflector curvature on hydrodynamic performances of a double-slotted cambered otter-board

NASA Astrophysics Data System (ADS)

WANG, Lei; Wang, Lu Min; Shi, Jian Gao; Yu, Wen Wen; Qi, Guang Rui; Zhang, Xun; Zhang, Rong Jun; Zhang, Tian Shu

2018-06-01

The effect of deflector curvature on hydrodynamic performances of a double-slotted cambered otter-board was investigated using engineering models in a wind tunnel. Four different curvature (0.06,0.09, 0.12 and 0.15) were evaluated at a wind speed of 28 m/s. Parameters measured included: drag coefficient Cx, lift coefficient Cy, pitch moment coefficient Cm, center of pressure coefficient Cp , over a range of angle of attack (0° to 70°). These coefficients were used in analyzing the differences in the performance among the four otter-board models. Results showed that the maximum lift coefficient Cy of the otter-board model with the curvature (0.06) of two deflectors was highest (2.020 at °=55°). The maximum Cy/Cx of the otter-board with the curvature (0.12) of two deflectors was highest (3.655 at °=22.5°). A comparative analysis of Cm and Cp showed that the stability of otter-board model with the curvature (0.12) of two deflectors is better in pitch, and the stability of otter-board model with the curvature (0.06) of two deflectors is better in roll. The findings of this study can offer useful reference data for the structural optimization of otter-boards for trawling.

Effect of panel shape on hydrodynamic performances of vertical v-shaped double- slotted cambered otter-board

NASA Astrophysics Data System (ADS)

Wang, Lei; Zhang, Xun; Wang, Lu Min; Huang, Hong Liang; Zhang, Yu; Liu, Yong Li; Feng, Wei Dong; Zhang, Rong Jun

2018-06-01

The effect of panel shape on hydrodynamic performances of a vertical v-shaped double-slotted cambered otter-board was investigated using engineering models in a wind tunnel. Three different shape panels (rhomboid, left trapezoid and isosceles trapezoid) were evaluated at a wind speed of 28 m/s. Parameters measured included: drag coefficient Cx, lift coefficient Cy, pitch moment coefficient Cm, center of pressure coefficient Cp , over a range of angle of attack (0° to 70°). These coefficients were used in analyzing the differences in the performance among the three otter-board models. Results showed that the maximum lift coefficient Cy of the otter-board model with the isosceles trapezoid shape panels was highest (2.103 at α=45°). The maximum Cy/Cx of the otter-board with the rhomboid shape panels was highest (3.976 at α=15°). A comparative analysis of Cm and Cp showed that the stability of otter-board model with the isosceles trapezoid shape panels is better in pitch, and the stability of otter-board model with the left trapezoid shape panels is better in roll. The findings of this study can offer useful reference data for the structural optimization of otter-boards for trawling.

Physiological and Molecular Characterization of Cephaleuros virescens Occurring in Mango Trees.

PubMed

Vasconcelos, Camila Vilela; Pereira, Fabíola Teodoro; Duarte, Elizabeth Amélia Alves; de Oliveira, Thiago Alves Santos; Peixoto, Nei; Carvalho, Daniel Diego Costa

2018-06-01

The objective of this work was to accomplish the isolation, molecular identification and characterizing the physiology of the causal agent of the algal spot in mango trees. For this purpose, the pathogen growth was assessed in different culture media, with subsequent observation and measurements of the filamentous cells. The molecular identification was made using mycelium obtained from leaf lesions and pure algae colonies grown in culture medium. Descriptions based on DNA sequencing indicated that the algae is Cephaleuros virescens . The algae must be isolated primarily in liquid medium for further pricking into agar medium. The highest mycelial growth average in Petri dishes occurred when the algae were grown in Trebouxia and BBM. Trebouxia enabled larger cells in the filamentous cells when compared to other culture media.

An Explanatory Model of Teacher Movement within Ontario School Boards

ERIC Educational Resources Information Center

Sibbald, Timothy M.

2017-01-01

Teacher movement within school boards is examined using multiple case study. Emergent themes achieved theoretical saturation and are consistent with the research literature. In this paper, the relationships between the themes are used to develop a substantive theoretical model of teacher movement within school boards. The model uses a two-phase…

Board evaluation and effectiveness: models, components and perspectives.

PubMed

Scharf, M; Marty, D; Barnsley, J

1994-01-01

Health facility boards are being challenged to increase their effectiveness in the face of the changing health care environment. To this end, accreditation standards require boards to develop methods of evaluating their governing function and performance. During a survey of governance issues, the authors interviewed a group of health service executives with respect to board evaluation at their facilities. The responses yielded insights relating to models and components of evaluation, board missions and policies, mentoring programs and trustee education and orientation.

Models of governance in multihospital systems. Implications for hospital and system-level decision-making.

PubMed

Morlock, L L; Alexander, J A

1986-12-01

This study utilizes data from a national survey of 159 multihospital systems in order to describe the types of governance structures currently being utilized, and to compare the policy making process for various types of decisions in systems with different approaches to governance. Survey results indicate that multihospital systems most often use one of three governance models. Forty-one percent of the systems (including 33% of system hospitals) use a parent holding company model in which there is a system-wide corporate governing board and separate governing boards for each member hospital. Twenty-two percent of systems in the sample (but 47% of all system hospitals) utilize what we have termed a modified parent holding company model in which there is one system-wide governing board, but advisory boards are substituted for governing boards at the local hospital level. Twenty-three percent of the sampled systems (including 11% of system hospitals) use a corporate model in which there is one system-wide governing board but no other governing or advisory boards at either the divisional, regional or local hospital levels. A comparison of systems using these three governance approaches found significant variation in terms of system size, ownership and the geographic proximity of member hospitals. In order to examine the relationship between alternative approaches to governance and patterns of decision-making, the three model types were compared with respect to the percentages of systems reporting that local boards, corporate management and/or system-wide corporate boards have responsibility for decision-making in a number of specific issue areas. Study results indicate that, regardless of model type, corporate boards are most likely to have responsibility for decisions regarding the transfer, pledging and sale of assets; the formation of new companies; purchase of assets greater than $100,000; changes in hospital bylaws; and the appointment of local board members. In contrast corporate management is relatively uninvolved in these issues, again regardless of governance model type. There is substantial variation in the locus of decision-making responsibility by governance model type for a variety of other issues, however, including: hospital-level service additions and deletions; operating and capital budgets; medical staff privileges, hospital-level long-range planning; hospital CEO performance evaluation and the appointment of hospital CEOs.(ABSTRACT TRUNCATED AT 400 WORDS)

A statistical mechanics model for free-for-all airplane passenger boarding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steffen, Jason H.; /Fermilab

2008-08-01

I discuss a model for free-for-all passenger boarding which is employed by some discount air carriers. The model is based on the principles of statistical mechanics where each seat in the aircraft has an associated energy which reflects the preferences of travelers. As each passenger enters the airplane they select their seats using Boltzmann statistics, proceed to that location, load their luggage, sit down, and the partition function seen by remaining passengers is modified to reflect this fact. I discuss the various model parameters and make qualitative comparisons of this passenger boarding model with those that involve assigned seats. Themore » model can be used to predict the probability that certain seats will be occupied at different times during the boarding process. These results might provide a useful description of this boarding method. The model is a relatively unusual application of undergraduate level physics and describes a situation familiar to many students and faculty.« less

A Cross-sectional Study of the Pattern of Body Image Perception among Female Students of BBM College in Vijayapur, North Karnataka

PubMed Central

Patil, Shailaja S.; Angadi, Mahabaleshwar Mahantappa; Pattankar, Tanuja P.

2016-01-01

Introduction Body image is an essential aspect of young girls’ self-definition and individual identity which is influenced by various biological, psychological and social factors. Excessive concern about body image, body image misconception are leading to dissatisfaction, disturbed eating patterns, affecting the nutritional status and also leading to depression and anxiety disorders. This concept of body image has been less explored in Indian context, especially among young girls. Aims The objectives of the study were to assess the body image perception among young college going girls, using a visual analog scale and to compare body image perception and satisfaction with their BMI levels and weight changing methods adopted. Materials and Methods An exploratory cross-sectional study was conducted among 63 female students studying BBM course at a private commerce institution in Vijayapur city. Data was collected using a self administered questionnaire containing details of basic socio-demographic information and a validated visual analogue scale. Height was measured by Seca Stadiometer, weight was measured using Digital weighing machine and Body Mass Index levels were calculated. Percentages were calculated for descriptive variables. Chi-square test was applied for analysing categorical variables. Spearman Rank correlation test was applied for analysing ordinal data. Results A 39.7% of participants were underweight and 15.9% were overweight/obese. Majority of underweight and overweight girls (72% and 89%, respectively) perceived themselves as normal weight. Body image satisfaction of participants was found to be significantly associated with their body image perception, mothers’ educational status and also with relatives’ and peer group’s opinions about their body weight. Unhealthy weight changing patterns like skipping meals (13%), increasing quantity and frequency of meals (17%) were reported among study participants Conclusion This exploratory study highlights the gap between young girls’ body image perception and their BMI levels, indicating body image misconception. Lower literacy level of mothers and opinions of relatives and friends significantly influenced body image satisfaction among study participants. Higher percentage of underweight (39.7%) coupled with unhealthy weight changing patterns reportedly adopted by participants (30%) indicates need for further research on this issue, to help inform public health nutrition programmes. PMID:27630869

A Cross-sectional Study of the Pattern of Body Image Perception among Female Students of BBM College in Vijayapur, North Karnataka.

PubMed

Rashmi, B M; Patil, Shailaja S; Angadi, Mahabaleshwar Mahantappa; Pattankar, Tanuja P

2016-07-01

Body image is an essential aspect of young girls' self-definition and individual identity which is influenced by various biological, psychological and social factors. Excessive concern about body image, body image misconception are leading to dissatisfaction, disturbed eating patterns, affecting the nutritional status and also leading to depression and anxiety disorders. This concept of body image has been less explored in Indian context, especially among young girls. The objectives of the study were to assess the body image perception among young college going girls, using a visual analog scale and to compare body image perception and satisfaction with their BMI levels and weight changing methods adopted. An exploratory cross-sectional study was conducted among 63 female students studying BBM course at a private commerce institution in Vijayapur city. Data was collected using a self administered questionnaire containing details of basic socio-demographic information and a validated visual analogue scale. Height was measured by Seca Stadiometer, weight was measured using Digital weighing machine and Body Mass Index levels were calculated. Percentages were calculated for descriptive variables. Chi-square test was applied for analysing categorical variables. Spearman Rank correlation test was applied for analysing ordinal data. A 39.7% of participants were underweight and 15.9% were overweight/obese. Majority of underweight and overweight girls (72% and 89%, respectively) perceived themselves as normal weight. Body image satisfaction of participants was found to be significantly associated with their body image perception, mothers' educational status and also with relatives' and peer group's opinions about their body weight. Unhealthy weight changing patterns like skipping meals (13%), increasing quantity and frequency of meals (17%) were reported among study participants. This exploratory study highlights the gap between young girls' body image perception and their BMI levels, indicating body image misconception. Lower literacy level of mothers and opinions of relatives and friends significantly influenced body image satisfaction among study participants. Higher percentage of underweight (39.7%) coupled with unhealthy weight changing patterns reportedly adopted by participants (30%) indicates need for further research on this issue, to help inform public health nutrition programmes.

Analysis and control of the vibration of doubly fed wind turbine

NASA Astrophysics Data System (ADS)

Yu, Manye; Lin, Ying

2017-01-01

The fault phenomena of the violent vibration of certain doubly-fed wind turbine were researched comprehensively, and the dynamic characteristics, load and fault conditions of the system were discussed. Firstly, the structural dynamics analysis of wind turbine is made, and the dynamics mold is built. Secondly, the vibration testing of wind turbine is done with the German test and analysis systems BBM. Thirdly, signal should be analyzed and dealt with. Based on the experiment, spectrum analysis of the motor dynamic balance can be made by using signal processing toolbox of MATLAB software, and the analysis conclusions show that the vibration of wind turbine is caused by dynamic imbalance. The results show that integrating mechanical system dynamics theory with advanced test technology can solve the vibration problem more successfully, which is important in vibration diagnosis of mechanical equipment.

Entanglement-based Free Space Quantum Cryptography in Daylight

NASA Astrophysics Data System (ADS)

Gerhardt, Ilja; Peloso, Matthew P.; Ho, Caleb; Lamas-Linares, Antia; Kurtsiefer, Christian

2009-05-01

In quantum key distribution (QKD) two families of protocols are established: One, based on preparing and sending approximations of single photons, the other based on measurements on entangled photon pairs, which allow to establish a secret key using less assumptions on the size of a Hilbert space. The larger optical bandwidth of photon pairs in comparison with light used for the first family makes establishing a free space link challenging. We present a complete entanglement based QKD system following the BBM92 protocol, which generates a secure key continuously 24 hours a day between distant parties. Spectral, spatial and temporal filtering schemes were introduced to a previous setup, suppressing more than 30,B of background. We are able to establish the link during daytime, and have developed an algorithm to start and maintain time synchronization with simple crystal oscillators.

Accounting for differing exposure patterns between laboratory tests and the field in the assessment of long-term risks of pesticides to terrestrial vertebrates.

PubMed

Fischer, David L

2005-11-01

Long-term risks of pesticides to birds and mammals are currently assessed by comparing effects thresholds determined in chronic laboratory studies to exposure levels expected to occur in the field. However, there is often a mismatch between exposure patterns tested in the laboratory tests (exposure levels held constant) and those experienced by animals in the field (exposure levels varying over time). Three methods for addressing this problem are presented and discussed. Time-weighted averaging (TWA) converts a variable field exposure regime to a single value that can be compared directly to the laboratory test results. Body-burden modeling (BBM) is applied to both laboratory and field exposure regimes allowing a straightforward comparison of body residue levels expected for each situation. Temporal analysis (TA) uses expert judgment to decide if the length of time exposure exceeds a toxicity threshold is long enough to cause biologically significant effects. To reduce uncertainty in long-term assessments, the conduct of specialized laboratory tests in which test subjects are administered a time-varying exposure that mimics what occurs in the field should be considered. Such tests may also be useful testing the validity of each of these assessment methods.

The impact of the board's strategy-setting role on board-management relations and hospital performance.

PubMed

Büchner, Vera Antonia; Schreyögg, Jonas; Schultz, Carsten

2014-01-01

The appropriate governance of hospitals largely depends on effective cooperation between governing boards and hospital management. Governing boards play an important role in strategy-setting as part of their support for hospital management. However, in certain situations, this active strategic role may also generate discord within this relationship. The objective of this study is to investigate the impact of the roles, attributes, and processes of governing boards on hospital performance. We examine the impact of the governing board's strategy-setting role on board-management collaboration quality and on financial performance while also analyzing the interaction effects of board diversity and board activity level. The data are derived from a survey that was sent simultaneously to German hospitals and their associated governing board, combined with objective performance information from annual financial statements and quality reports. We use a structural equation modeling approach to test the model. The results indicate that different board characteristics have a significant impact on hospital performance (R = .37). The strategy-setting role and board-management collaboration quality have a positive effect on hospital performance, whereas the impact of strategy-setting on collaboration quality is negative. We find that the positive effect of strategy-setting on performance increases with decreasing board diversity. When board members have more homogeneous backgrounds and exhibit higher board activity levels, the negative effect of the strategy-setting on collaboration quality also increases. Active strategy-setting by a governing board may generally improve hospital performance. Diverse members of governing boards should be involved in strategy-setting for hospitals. However, high board-management collaboration quality may be compromised if managerial autonomy is too highly restricted. Consequently, hospitals should support board-management collaboration about empowered contrasting board roles.

The AGU Data Management Maturity Model Initiative

NASA Astrophysics Data System (ADS)

Bates, J. J.

2015-12-01

In September 2014, the AGU Board of Directors approved two initiatives to help the Earth and space sciences community address the growing challenges accompanying the increasing size and complexity of data. These initiatives are: 1) Data Science Credentialing: development of a continuing education and professional certification program to help scientists in their careers and to meet growing responsibilities and requirements around data science; and 2) Data Management Maturity (DMM) Model: development and implementation of a data management maturity model to assess process maturity against best practices, and to identify opportunities in organizational data management processes. Each of these has been organized within AGU as an Editorial Board and both Boards have held kick off meetings. The DMM model Editorial Board will recommend strategies for adapting and deploying a DMM model to the Earth and space sciences create guidance documents to assist in its implementation, and provide input on a pilot appraisal process. This presentation will provide an overview of progress to date in the DMM model Editorial Board and plans for work to be done over the upcoming year.

34 CFR 403.12 - What are the additional responsibilities of the State board?

Code of Federal Regulations, 2010 CFR

2010-07-01

... least two) technical committees to advise the State council and the State board on the development of model curricula to address State labor market needs. The technical committees shall develop an inventory of skills that may be used by the State board to define state-of-the-art model curricula. This...

34 CFR 403.12 - What are the additional responsibilities of the State board?

Code of Federal Regulations, 2011 CFR

2011-07-01

... least two) technical committees to advise the State council and the State board on the development of model curricula to address State labor market needs. The technical committees shall develop an inventory of skills that may be used by the State board to define state-of-the-art model curricula. This...

Reinventing Your Board: A Step-by-Step Guide to Implementing Policy Governance. The Jossey-Bass Nonprofit and Public Management Series.

ERIC Educational Resources Information Center

Carver, John; Carver, Miriam Mayhew

This guide provides practical advice regarding implementation of the Policy Governance model for school boards. Chapter 1, "Setting the Stage," explores questions commonly raised by boards prior to implementation of the Policy Governance model. Chapter 2, "The Theoretical Foundation," reviews the key theoretical principles of…

Optimal back-to-front airplane boarding.

PubMed

Bachmat, Eitan; Khachaturov, Vassilii; Kuperman, Ran

2013-06-01

The problem of finding an optimal back-to-front airplane boarding policy is explored, using a mathematical model that is related to the 1+1 polynuclear growth model with concave boundary conditions and to causal sets in gravity. We study all airplane configurations and boarding group sizes. Optimal boarding policies for various airplane configurations are presented. Detailed calculations are provided along with simulations that support the main conclusions of the theory. We show that the effectiveness of back-to-front policies undergoes a phase transition when passing from lightly congested airplanes to heavily congested airplanes. The phase transition also affects the nature of the optimal or near-optimal policies. Under what we consider to be realistic conditions, optimal back-to-front policies lead to a modest 8-12% improvement in boarding time over random (no policy) boarding, using two boarding groups. Having more than two groups is not effective.

9. VIEW, LOOKING SOUTH, OF INTERLOCKING MACHINE, WITH ORIGINAL MODEL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. VIEW, LOOKING SOUTH, OF INTERLOCKING MACHINE, WITH ORIGINAL MODEL BOARD IN CENTER, NEW MODEL BOARD AT LEFT AND MODEL SEMAPHORES AT TOP OF PHOTOGRAPH, THIRD FLOOR - South Station Tower No. 1 & Interlocking System, Dewey Square, Boston, Suffolk County, MA

View west within the periphery of the load dispatch model ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View west within the periphery of the load dispatch model board, operator's console is at lower center and button board is at lower right of the photograph; section of model board shown covers substation from Perryman (left) to Frankford (right); instruments at right center of photograph formerly monitored energy usage and were replaced by computerized monitoring system. - Thirtieth Street Station, Load Dispatch Center, Thirtieth & Market Streets, Railroad Station, Amtrak (formerly Pennsylvania Railroad Station), Philadelphia, Philadelphia County, PA

Another level of leadership: nurses on boards.

PubMed

Bleich, Michael R

2014-12-01

The movement to place nurses on boards of directors is growing, enriching boards with individuals possessing knowledge of clinical quality tied to care delivery models, human resource competencies and management, finance, and organizational change. Professional development educators are poised to advance a board's capacity to address complex health care problems.

Governance and School Boards in Non-State Schools in Australia

ERIC Educational Resources Information Center

Austen, Steven; Swepson, Pam; Marchant, Teresa

2012-01-01

The paper explores governance arrangements in non-state school in Australia, using 17 interviews in six schools. The focus is on board composition, structure and reporting. Useful contributions about innovative practice are identified. School boards may benefit from implementing more stakeholder engagement. Existing models of school boards from…

View west of load dispatch model board; section covers substations ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View west of load dispatch model board; section covers substations from edgerly (right) to thorndale and west yard (left). Instruments at bottom of center board section formerly monitored energy usage and were replaced by a computerized monitoring system. - Thirtieth Street Station, Load Dispatch Center, Thirtieth & Market Streets, Railroad Station, Amtrak (formerly Pennsylvania Railroad Station), Philadelphia, Philadelphia County, PA

Vibration analysis of printed circuit boards: Effect of boundary condition

NASA Astrophysics Data System (ADS)

Prashanth, M. D.

2018-04-01

A spacecraft consists of a number of electronic packages to meet the functional requirements. An electronic package is generally an assembly of printed circuit boards placed in a mechanical housing. A number of electronic components are mounted on the printed circuit board (PCB). A spacecraft experiences various types of loads during its launch such as vibration, acoustic and shock loads. Prediction of response for printed circuit boards due to vibration loads is important for mechanical design and reliability of electronic packages. The modeling and analysis of printed circuit boards is required for accurate prediction of response due to vibration loads. The response of PCB is highly dependent on the mounting configuration of PCB. In addition, anti-vibration mounts or stiffeners are used to reduce the PCB response. Vibration analysis of printed circuit boards is carried out using finite element method. The objective of this paper is to determine the dynamic characteristics of a printed circuit board. Modeling and analysis of PCB shall be carried out to study the effect of boundary conditions on the vibration response. The modeling of stiffeners or ribs shall also be considered in detail. The analysis results shall be validated using vibration tests of PCB.

Development of Drop/Shock Test in Microelectronics and Impact Dynamic Analysis for Uniform Board Response

NASA Astrophysics Data System (ADS)

Kallolimath, Sharan Chandrashekar

For the past several years, many researchers are constantly developing and improving board level drop test procedures and specifications to quantify the solder joint reliability performance of consumer electronics products. Predictive finite element analysis (FEA) by utilizing simulation software has become widely acceptable verification method which can reduce time and cost of the real-time test process. However, due to testing and metrological limitations it is difficult not only to simulate exact drop condition and capture critical measurement data but also tedious to calibrate the system to improve test methods. Moreover, some of the important ever changing factors such as board flexural rigidity, damping, drop height, and drop orientation results in non-uniform stress/strain distribution throughout the test board. In addition, one of the most challenging tasks is to quantify uniform stress and strain distribution throughout the test board and identify critical failure factors. The major contributions of this work are in the four aspects of the drop test in electronics as following. First of all, an analytical FEA model was developed to study the board natural frequencies and responses of the system with the consideration of dynamic stiffness, damping behavior of the material and effect of impact loading condition. An approach to find the key parameters that affect stress and strain distributions under predominate mode responses was proposed and verified with theoretical solutions. Input-G method was adopted to study board response behavior and cut boundary interpolation methods was used to analyze local model solder joint stresses with the development of global/local FEA model in ANSYS software. Second, no ring phenomenon during the drop test was identified theoretically when the test board was modeled as both discrete system and continuous system. Numerical analysis was then conducted by FEA method for detailed geometry of attached chips with solder-joints. No ring test conditions was proposed and verified for the current widely used JEDEC standard. The significance of impact loading parameters such as pulse magnitude, pulse duration, pulse shapes and board dynamic parameter such as linear hysteretic damping and dynamic stiffness were discussed. Third, Kirchhoff's plate theory by principle of minimum potential energy was adopted to develop the FEA formulation to consider the effect of material hysteretic damping for the currently used JEDEC board test and proposed no-ring response test condition. Fourth, a hexagonal symmetrical board model was proposed to address the uniform stress and strain distribution throughout the test board and identify the critical failure factors. Dynamic stress and strain of the hexagonal board model were then compared with standard JEDEC board for both standard and proposed no-ring test conditions. In general, this line of research demonstrates that advanced techniques of FEA analysis can provide useful insights concerning the optimal design of drop test in microelectronics.

The Effects of Governing Board Configuration on Profound Organizational Change in Hospitals

ERIC Educational Resources Information Center

Alexander, Jeffrey A.; Ye, Yining; Lee, Shoou-Yih D.; Weiner, Bryan J.

2006-01-01

This study extends the literature on governing boards and organizational change by examining how governing board configurations have influenced profound organizational change in U.S. hospitals, and the conditions under which such change occurs. Hospitals governed by boards that more closely resembled a corporate governance model were more likely…

Hospital board structure: changing form and changing issues.

PubMed

Tregoning, S

2000-01-01

Economic and social pressures are compelling many hospitals to consider their current board structure in an effort to position their hospital to meet changing demands. A national profile of the structures of hospital boards has been compiled from a questionnaire completed by hospital board representatives from both government and non-government sectors. Results show that hospital board structures are a hybrid of both philanthropic and corporate models. New structures may be required to meet future challenges. In developing new structures, consideration should be given to identifying the skills and processes required to undertake board business.

GASB and Its New Financial Reporting Model.

ERIC Educational Resources Information Center

Bean, David R.

1998-01-01

The Governmental Accounting Standards Board (GASB) recently crafted a new dual-perspective financial reporting model. In their tentative conclusions concerning model elements, the board started with the new management's discussion and analysis (MD&A) letter, continued with the new entrywide statements, and then moved to the more familiar…

Design and optimization of a fiber optic data link for new generation on-board SAR processing architectures

NASA Astrophysics Data System (ADS)

Ciminelli, Caterina; Dell'Olio, Francesco; Armenise, Mario N.; Iacomacci, Francesco; Pasquali, Franca; Formaro, Roberto

2017-11-01

A fiber optic digital link for on-board data handling is modeled, designed and optimized in this paper. Design requirements and constraints relevant to the link, which is in the frame of novel on-board processing architectures, are discussed. Two possible link configurations are investigated, showing their advantages and disadvantages. An accurate mathematical model of each link component and the entire system is reported and results of link simulation based on those models are presented. Finally, some details on the optimized design are provided.

Using Modern Design Tools for Digital Avionics Development

NASA Technical Reports Server (NTRS)

Hyde, David W.; Lakin, David R., II; Asquith, Thomas E.

2000-01-01

Using Modem Design Tools for Digital Avionics Development Shrinking development time and increased complexity of new avionics forces the designer to use modem tools and methods during hardware development. Engineers at the Marshall Space Flight Center have successfully upgraded their design flow and used it to develop a Mongoose V based radiation tolerant processor board for the International Space Station's Water Recovery System. The design flow, based on hardware description languages, simulation, synthesis, hardware models, and full functional software model libraries, allowed designers to fully simulate the processor board from reset, through initialization before any boards were built. The fidelity of a digital simulation is limited to the accuracy of the models used and how realistically the designer drives the circuit's inputs during simulation. By using the actual silicon during simulation, device modeling errors are reduced. Numerous design flaws were discovered early in the design phase when they could be easily fixed. The use of hardware models and actual MIPS software loaded into full functional memory models also provided checkout of the software development environment. This paper will describe the design flow used to develop the processor board and give examples of errors that were found using the tools. An overview of the processor board firmware will also be covered.

Back to Basics: Training Student Funding Boards.

ERIC Educational Resources Information Center

Cufaude, Jeff

1988-01-01

The allocation of student activities fees is one of the primary roles of student associations on most college campuses. Student government and fee board organization models, organizational issues, training board members, and framework for ethical communication are discussed. (MLW)

Making Commissions Work: A Handbook for Parish Religious Education Boards/Commissions.

ERIC Educational Resources Information Center

McClain, Maria Thornton, Ed.

This handbook is part of an ongoing process to share models of Total Catholic Education boards, religious education boards, and Catholic school boards. The purpose of the book is two-fold: (1) to provide a rationale for having a group within the parish that sets the direction for the religious education of children, youth, and adults; and (2) to…

A Study of Experience Credit for Professional Engineering Licensure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, M.A.

2003-08-11

Oak Ridge National Laboratory performed a study of experience credit for professional engineering licensure for the Department of Energy's Industrial Assessment Center (IAC) Program. One of the study's goals was to determine how state licensure boards grant experience credit for engineering licensure, particularly in regards to IAC experience and experience prior to graduation. Another goal involved passing IAC information to state licensure boards to allow the boards to become familiar with the program and determine if they would grant credit to IAC graduates. The National Council of Examiners for Engineers and Surveyors (NCEES) has adopted a document, the ''Model Law''.more » This document empowers states to create state engineering boards and oversee engineering licensure. The board can also interpret and adopt rules and regulations. The Model Law also gives a general ''process'' for engineering licensure, the ''Model Law Engineer''. The Model Law Engineer requires that an applicant for professional licensure, or professional engineering (PE) licensure, obtain a combination of formal education and professional experience and successfully complete the fundamentals of engineering (FE) and PE exams. The Model Law states that a PE applicant must obtain four years of ''acceptable'' engineering experience after graduation to be allowed to sit for the PE exam. Although the Model Law defines ''acceptable experience,'' it is somewhat open to interpretation, and state boards decide whether applicants have accumulated the necessary amount of experience. The Model Law also allows applicants one year of credit for postgraduate degrees as well as experience credit for teaching courses in engineering. The Model Law grants states the power to adopt and amend the bylaws and rules of the Model Law licensure process. It allows state boards the freedom to modify the experience requirements for professional licensure. This power has created variety in experience requirements, and licensure requirements can differ from state to state. Before this study began, six questions were developed to help document how state boards grant experience credit. Many of the questions were formulated to determine how states deal with teaching experience, postgraduate credit, experience prior to graduation, PE and FE waivers, and the licensure process in general. Data were collected from engineering licensure boards for each of the fifty states and the District of Columbia. Telephone interviews were the primary method of data collection, while email correspondence was also used to a lesser degree. Prior to contacting each board, the researchers attempted to review each state's licensure web site. Based on the data collected, several trends and patterns were identified. For example, there is a general trend away from offering credit for experience prior to graduation. The issue becomes a problem when a PE from one state attempts to gain a license in another state by comity or endorsement. Tennessee and Kansas have recently stopped offering this credit and Mississippi cautions applicants that it could be difficult to obtain licensure in other states.« less

Lumped Parameter Modeling for Rapid Vibration Response Prototyping and Test Correlation for Electronic Units

NASA Technical Reports Server (NTRS)

Van Dyke, Michael B.

2013-01-01

Present preliminary work using lumped parameter models to approximate dynamic response of electronic units to random vibration; Derive a general N-DOF model for application to electronic units; Illustrate parametric influence of model parameters; Implication of coupled dynamics for unit/board design; Demonstrate use of model to infer printed wiring board (PWB) dynamics from external chassis test measurement.

Modeling and characteristic of the SMT Board Plug connector in high speed optical communication system

NASA Astrophysics Data System (ADS)

Wu, Haoran; Dong, Zhenzhen; Wang, Tanglin; Zhao, Heng; Feng, Junbo; Cui, Naidi; Teng, Jie; Guo, Jin

2015-04-01

Modeling and characteristic of the SMT Board Plug connector, which is used to connect micro optical transceiver to the main board, are proposed and analyzed in this paper. When the high speed signal transfers from the PCB of transceiver to main board through SMT Board Plug connector, the structure and material discontinuity of the connector causes insertion losses and impedance mismatches. This makes the performance of high speed digital system exacerbated. So it is essential to analyze the signal transfer characteristics of the connector and find out what factors affected the signal quality at the design stage of the digital system. To solve this problem, Ansoft's High Frequency Structure Simulator (HFSS), based on the finite element method, was employed to build accurate 3D models, analyze the effects of various structure parameters, and obtain the full-wave characteristics of the SMT Board Plug connectors in this paper. Then an equivalent circuit model was developed. The circuit parameters were extracted precisely in the frequency range of interests by using the curve fitting method in ADS software, and the result was in good agreement with HFSS simulations up to 8GHz with different structure parameters. At last, the measurement results of S-parameter and eye diagram were given and the S-parameters showed good coincidence between the measurement and HFSS simulation up to 4GHz.

The Evolving Roles of the State Boards of Education, State Education Agencies, and Chief State School Officers. Occasional Paper Series No. 8.

ERIC Educational Resources Information Center

First, Patricia F.; Quaglia, Russell J.

The roles of state boards of education, state education agencies, and chief state school officers are examined. A review of governance models beginning with colonial days and ending with consideration of recent research on the functioning of state boards of education is provided, and it is concluded that state boards have wide discretionary…

Good Governance Is a Choice: A Way to Re-Create Your Board--The Right Way

ERIC Educational Resources Information Center

Quinn, Randy; Dawson, Linda J.

2011-01-01

This book comes with a promise: after reading it, you will never again think of board work the same as before. "Good Governance is a Choice" is a book about, and for, boards of public and non-profit organizations. Its central focus is on public school boards and the special challenges they face, but the governing model it introduces, Coherent…

75 FR 33306 - Notice of Meeting Location Change and Joint Meeting of FASAB and GASB

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-11

... meeting is to discuss: --Measurement Attributes, --Reporting Model, --Cost Accounting, and --Governance... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Notice of Meeting Location Change and Joint Meeting of FASAB and GASB AGENCY: Federal Accounting Standards Advisory Board. ACTION: Notice. Board Action...

On-Board Entry Trajectory Planning Expanded to Sub-orbital Flight

NASA Technical Reports Server (NTRS)

Lu, Ping; Shen, Zuojun

2003-01-01

A methodology for on-board planning of sub-orbital entry trajectories is developed. The algorithm is able to generate in a time frame consistent with on-board environment a three-degree-of-freedom (3DOF) feasible entry trajectory, given the boundary conditions and vehicle modeling. This trajectory is then tracked by feedback guidance laws which issue guidance commands. The current trajectory planning algorithm complements the recently developed method for on-board 3DOF entry trajectory generation for orbital missions, and provides full-envelope autonomous adaptive entry guidance capability. The algorithm is validated and verified by extensive high fidelity simulations using a sub-orbital reusable launch vehicle model and difficult mission scenarios including failures and aborts.

Educators' Responsibilities for Student Records. A Model Policy and Rules (Revised).

ERIC Educational Resources Information Center

Bartlett, Larry D.; And Others

To assist Iowa school boards and administrators in handling student records, this revision of a 1976 publication presents model policies and rules for compliance with the federal Family Educational Rights and Privacy Act of 1974 and the Education for All Handicapped Children Act. Included in this guide are a model statement of school board policy…

Effectively Using Discussion Boards to Engage Students in Introductory Leadership Courses

ERIC Educational Resources Information Center

Smith, Deborah N.

2015-01-01

This article discusses the use of online asynchronous discussion boards as a valuable tool for connecting students to leadership concepts, theories, and models in introductory leadership survey courses. Recommendations are given for designing effective discussion boards that engage students and enhance their learning. Student outcomes include…

A longitudinal social network analysis of the editorial boards of medical informatics and bioinformatics journals.

PubMed

Malin, Bradley; Carley, Kathleen

2007-01-01

The goal of this research is to learn how the editorial staffs of bioinformatics and medical informatics journals provide support for cross-community exposure. Models such as co-citation and co-author analysis measure the relationships between researchers; but they do not capture how environments that support knowledge transfer across communities are organized. In this paper, we propose a social network analysis model to study how editorial boards integrate researchers from disparate communities. We evaluate our model by building relational networks based on the editorial boards of approximately 40 journals that serve as research outlets in medical informatics and bioinformatics. We track the evolution of editorial relationships through a longitudinal investigation over the years 2000 through 2005. Our findings suggest that there are research journals that support the collocation of editorial board members from the bioinformatics and medical informatics communities. Network centrality metrics indicate that editorial board members are located in the intersection of the communities and that the number of individuals in the intersection is growing with time. Social network analysis methods provide insight into the relationships between the medical informatics and bioinformatics communities. The number of editorial board members facilitating the publication intersection of the communities has grown, but the intersection remains dependent on a small group of individuals and fragile.

The Integrated Medical Model: Outcomes from Independent Review

NASA Technical Reports Server (NTRS)

Myers, J.; Garcia, Y.; Griffin, D.; Arellano, J.; Boley, L.; Goodenow, D. A.; Kerstman, E.; Reyes, D.; Saile, L.; Walton, M.;

Whirling Arm Tests on the Effect of Ground Proximity to an Airplane Wing

NASA Technical Reports Server (NTRS)

Long, M. E.

1944-01-01

This report gives the results of tests on a rectangular wing model with a 20% full spun split flap, conducted on the whirling arm at the Daniel Guggenheim Airship Institute in Akron, Ohio. The effect of a ground board on the lift and pitching moment was measured. The ground board consisted of an inclined ramp rising up in the test channel to a level floor extending for some distance parallel to the model path. The path of the wing model with respect to the ground board accordingly represented with comparative exactness an airplane coming in for a landing. The ground clearances over the level portion of the board varied from 0 6 to 1,6 chord lengths. Results are given in the standard dimensionless coefficients plotted versus angle of attack for a particular ground clearance. The effect of the ground board is to increase the lift coefficient for a given angle of attack all the way up the stall. The magnitude of the increase varies both with the ground clearance and the angle of attack. The effect on the pitching moment coefficient is not so readily apparent due to experimental difficulties but, in general, the diving moment increases over the ground board. This effect is apparent principally at the high angles of attack. An exception to this effect occurs with flaps deflected at the lowest ground clearance (0.6 chords). Here the diving moment decreases over the ground board.

Board task performance: An exploration of micro- and macro-level determinants of board effectiveness

PubMed Central

Minichilli, Alessandro; Zattoni, Alessandro; Nielsen, Sabina; Huse, Morten

2012-01-01

This paper addresses recent calls to narrow the micro–macro gap in management research (Bamberger, 2008), by incorporating a macro-level context variable (country) in exploring micro-level determinants of board effectiveness. Following the integrated model proposed by Forbes and Milliken (1999), we identify three board processes as micro-level determinants of board effectiveness. Specifically, we focus on effort norms, cognitive conflicts and the use of knowledge and skills as determinants of board control and advisory task performance. Further, we consider how two different institutional settings influence board tasks, and how the context moderates the relationship between processes and tasks. Our hypotheses are tested on a survey-based dataset of 535 medium-sized and large industrial firms in Italy and Norway, which are considered to substantially differ along legal and cultural dimensions. The findings show that: (i) Board processes have a larger potential than demographic variables to explain board task performance; (ii) board task performance differs significantly between boards operating in different contexts; and (iii) national context moderates the relationships between board processes and board task performance. Copyright © 2010 John Wiley & Sons, Ltd. PMID:23365485

Teach, Coach, Live: The Viability of the Three-Role Teaching Model in the 21st Century

ERIC Educational Resources Information Center

Martin, Joseph Gregory

2016-01-01

This explanatory mixed-methods study is focused on the sustainability of the triple-threat model of teaching found at elite American boarding schools. In this model, faculty members are expected to teach, coach, and perform residential duties as part of their contract. While elite boarding schools have been researched in recent years, no research…

A Model for School Board Operation.

ERIC Educational Resources Information Center

Hickcox, Edward S.; And Others

A school board must operate in such a way that it can cope with the increasingly larger size, complex organization, and sophisticated programs of schools. The relationships among the community, board, and school can be viewed as component parts of a system. Formal and informal lines of communication exist among these parts--between the community…

Applying Item Response Theory Modeling in Educational Research

ERIC Educational Resources Information Center

Le, Dai-Trang

2013-01-01

In an effort to understand how school boards in America's K-12 school system function, a research collaboration was undertaken among four agencies: the National School Boards Association, the Thomas B. Fordham Institute, the Iowa Association of School Boards, and the Wallace Foundation. These groups joined effort to conduct research on school…

The Board's Role in Financial Oversight. AGB Board Essentials Series

ERIC Educational Resources Information Center

Krawitz, Natalie

2015-01-01

An often-volatile economy, changing demographics, and technological innovations in educational delivery are among the dramatic changes across higher education that have forced boards and institutions to question the viability of the existing business model. Flat or declining state support in real terms, lower investment returns in some years,…

78 FR 58543 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-24

... on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for Occupational Safety... the Energy Employees Occupational Illness Compensation Program Act of 2000 to advise the President on... Subcommittee Report; SEC Issues Work Group Report on ``Sufficient Accuracy''/Co-Worker Dose Modeling; SEC...

A National Board Certified Teacher in the Principalship: A Qualitative Analysis of Leadership Behaviors

ERIC Educational Resources Information Center

Gee, Ralph L.

2016-01-01

The placement of National Board Certified Teachers (NBCTs) in school leadership roles emerged as a feature of comprehensive reform models and school improvement initiatives. Educational practitioners must verify the saliency of the National Board for Professional Teaching Standards (NBPTS) process in preparing NBCTs for school leadership,…

Adaptive Leadership in School Boards in Australia: An Emergent Model

ERIC Educational Resources Information Center

Campbell-Evans, Glenda; Gray, Jan; Leggett, Bridget

2014-01-01

When school boards are confronted with the challenge of unfamiliar, changing contexts, opportunities and governance responsibilities, they have to be able to respond appropriately. The research reported in this paper investigated the response of five Western Australian primary school boards to such situations. It analyses interview data from 49…

Health governance--its introduction in Lanarkshire Health Board.

PubMed

Wrench, J G; Moir, D C

2002-01-01

To describe an approach to implementing the principles of clinical governance in a Health Board setting. Using guidance from the Scottish Executive and The Faculty of Public Health Medicine to set up a health governance structure at Health Board level. Auditing current work to identify areas that required to be progressed. Lanarkshire Health Board. A Health Governance Committee and a Health Governance Advisory Group, to support the work of the main committee, were set up at Board level. The Scottish Executive Governance Monitoring Template has been adapted to cover the main public health functions. Topics considered in the first year include qualifications, registration and CPD activity of Consultants in Public Health Medicine, audit of public health advice on gastro-intestinal illness, audit of DPH Annual Report and audit of items of business on Health Board agenda. The model developed in Lanarkshire has a Health Governance Advisory Group which works in support of the main Health Governance Committee. This model works well in practice with much of the routine work being done by the Advisory Group. This has streamlined the work of the Health Governance Committee and facilitated its introduction.

Board certification in professional psychology: promoting competency and consumer protection.

PubMed

Cox, David R

2010-04-01

Board certification in psychology provides an opportunity for increased assessment of and demonstration of competence in the profession. In addition to serving as a means of consumer protection, it can serve the professional psychologist by providing the opportunity for increased income, professional satisfaction, facilitated mobility, and professional development. Jurisdictional and organizational recognition of the importance of board certification is increasing. This article uses the model and experience of the American Board of Professional Psychology, with particular attention to the American Board of Clinical Neuropsychology and the American Academy of Clinical Neuropsychology, to illustrate these benefits. Recent developments regarding board certification are described, as well as how to become involved in the process.

Telecommunications and the Classroom: Where We've Been and Where We Should Be Going.

ERIC Educational Resources Information Center

Goldberg, Fred S.

1988-01-01

Discussion of the use of telecommunications highlights projects designed by the New York City Board of Education to investigate telecommunications alternatives for the classroom. Telecommunications systems models are described, including electronic bulletin boards and networking; and instructional models are explained, including computer mediated…

1/50 Scale Model Of The 80x120 Foot Wind Tunnel Model (NFAC) In The Test Section Of The 40x80 Wind Tunnel.

NASA Image and Video Library

1996-06-27

(03/12/1976) 1/50 scale model of the 80x120 foot wind tunnel model (NFAC) in the test section of the 40x80 wind tunnel. Model viewed from the west, mounted on a rotating ground board designed for this test. Ramp leading to ground board includes a generic building placed in front of the 80x120 inlet.

The internal processes and behavioral dynamics of hospital boards: an exploration of differences between high- and low-performing hospitals.

PubMed

Kane, Nancy M; Clark, Jonathan R; Rivenson, Howard L

2009-01-01

Nonprofit hospital boards are under increasing pressure to improve financial, clinical, and charitable and community benefit performance. Most research on board effectiveness focuses on variables measuring board structure and attributes associated with competing ideal models of board roles. However, the results do not provide clear evidence that one role is superior to another and suggest that in practice boards pursue hybrid roles. Board dynamics and processes have received less attention from researchers, but emerging theoretical frameworks highlight them as key to effective corporate governance. We explored differences in board processes and behavioral dynamics between financially high- and low-performing hospitals, with the goal of developing a better understanding of the best board practices in nonprofit hospitals. A comparative case study approach allowed for in-depth, qualitative assessments of how the internal workings of boards differ between low- and high-performing facilities. Boards of hospitals with strong financial performance exhibited behavioral dynamics and internal processes that differed in important ways from those of hospitals with poor financial performance. Boards need to actively attend to key processes and foster positive group dynamics in decision making to be more effective in governing hospitals.

Unique governance for a national ministry. Catholic Health Initiatives' board structure empowers laity, supports mission.

PubMed

Poe, J E

1998-01-01

The three original founding healthcare systems and 10 sponsoring religious institutes of Catholic Health Initiatives (CHI) have developed an unprecedented governance model to support their vision of a national Catholic health ministry in the twenty-first century. The new organization spans 22 states; annual revenues exceed $4.7 billion. Religious institutes choose either active or honorary status before consolidating with CHI, depending on their desired involvement in the organization. Currently, nine are active and two are honorary. CHI's civil corporation comprises one representative from each active congregation. These representatives approve major changes in mission or philosophical direction. They control board membership by appointing three to five congregation representatives as sponsorship trustees, who are responsible for approving the remaining members of the Board of Stewardship Trustees. This half-religious, half-lay governing board is responsible for leading CHI. CHI has only two levels of governance, a national board and boards of market-based organizations, for instance a network of facilities with one management structure, or a community board of an individual facility. This avoids multiple administrative layers and approval processes. The organization has a civil identity as CHI and a canonical identity as a public juridic person of pontifical right, called Catholic Health Care Federation (CHCF). The governing board members of CHI, as members of CHCF, serve as the religious sponsors for all CHI health facilities. Some facilities have already been "alienated" (turned over) to CHI by their religious institutes; others will be alienated in the future. CHI's recent consolidation with Sisters of Charity of Nazareth Health System added an 11th sponsor, a sixth geographic region, and two members--one religious and one lay--to the governing board. The governance model assists such growth through the appeal of an equal religious-lay partnership and a flexible sponsorship model.

76 FR 63613 - Environmental Management Site-Specific Advisory Board, Hanford

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-13

... membership reappointment process. DOE Presentation: Tank Vapor Monitoring. Pacific Northwest National Laboratory Presentation: Advanced Simulation Capability for EM/Groundwater Modeling. Board Business: [[Page 63614

Light Scattering by Ice Crystals Containing Air Bubbles

NASA Astrophysics Data System (ADS)

Zhang, J.; Panetta, R. L.; Yang, P.; Bi, L.

2014-12-01

The radiative effects of ice clouds are often difficult to estimate accurately, but are very important for interpretation of observations and for climate modeling. Our understanding of these effects is primarily based on scattering calculations, but due to the variability in ice habit it is computationally difficult to determine the required scattering and absorption properties, and the difficulties are only compounded by the need to include consideration of air and carbon inclusions of the sort frequently observed in collected samples. Much of the previous work on effects of inclusions in ice particles on scattering properties has been conducted with variants of geometric optics methods. We report on simulations of scattering by ice crystals with enclosed air bubbles using the pseudo-spectral time domain method (PSTD) and improved geometric optics method (IGOM). A Bouncing Ball Model (BBM) is proposed as a parametrization of air bubbles, and the results are compared with Monte Carlo radiative transfer calculations. Consistent with earlier studies, we find that air inclusions lead to a smoothing of variations in the phase function, weakening of halos, and a reduction of backscattering. We extend these studies by examining the effects of the particular arrangement of a fixed number of bubbles, as well as the effects of splitting a given number of bubbles into a greater number of smaller bubbles with the same total volume fraction. The result shows that the phase function will not change much for stochastic distributed air bubbles. It also shows that local maxima of phase functions are smoothed out for backward directions, when we break bubbles into small ones, single big bubble scatter favors more forward scattering than multi small internal scatters.

National Board Certification and Teacher Effectiveness: Evidence from Washington State

ERIC Educational Resources Information Center

Cowan, James; Goldhaber, Dan

2016-01-01

We study the effectiveness of teachers certified by the National Board for Professional Teaching Standards (NBPTS) in Washington State, which has one of the largest populations of National Board-Certified Teachers (NBCTs) in the nation. Based on value-added models in math and reading, we find that NBPTS-certified teachers are about 0.01-0.05…

High School Students' Attitudes towards Smart Board Use in Biology Classes

ERIC Educational Resources Information Center

Yapici, I. Ümit; Karakoyun, Ferit

2016-01-01

The present study aimed at determining high school students' attitudes towards smart board use in biology classes. The study was carried out using the survey model. The study group was made up of 200 high school students. As the data collection tool, the "Student Attitude Scale for Smart Board Use" developed by Elaziz was used. The…

Teacher Leader Model Standards and the Functions Assumed by National Board Certified Teachers

ERIC Educational Resources Information Center

Swan Dagen, Allison; Morewood, Aimee; Smith, Megan L.

2017-01-01

The Teacher Leader Model Standards (TLMS) were created to stimulate discussion around the leadership responsibilities teachers assume in schools. This study used the TLMS to gauge the self-reported leadership responsibilities of National Board Certified Teachers (NBCTs). The NBCTs reported engaging in all domains of the TLMS, most frequently with…

Does governance matter? Board configuration and performance in not-for-profit hospitals.

PubMed

Alexander, Jeffrey A; Lee, Shoou-Yih D

2006-01-01

As performance accountabilities, external oversight, and market competition among not-for-profit (NFP) hospitals have grown, governing boards have been given a more central leadership role. This article examines these boards' effectiveness, particularly how their configuration influenced a range of performance outcomes in NFP community hospitals. Results indicate that hospitals governed by boards using a corporate governance model, versus hospitals governed by philanthropic-style boards, were likely to be more efficient and have more admissions and a larger share of the local market. Occupancy and cash flow were generally unrelated to hospitals' governing board configuration. However, effects of governance configuration were more pronounced in freestanding and public NFP hospitals compared with system-affiliated and private NFP hospitals, respectively.

Optimal boarding method for airline passengers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steffen, Jason H.; /Fermilab

2008-02-01

Using a Markov Chain Monte Carlo optimization algorithm and a computer simulation, I find the passenger ordering which minimizes the time required to board the passengers onto an airplane. The model that I employ assumes that the time that a passenger requires to load his or her luggage is the dominant contribution to the time needed to completely fill the aircraft. The optimal boarding strategy may reduce the time required to board and airplane by over a factor of four and possibly more depending upon the dimensions of the aircraft. I explore some features of the optimal boarding method andmore » discuss practical modifications to the optimal. Finally, I mention some of the benefits that could come from implementing an improved passenger boarding scheme.« less

Does Governance Matter? Board Configuration and Performance in Not-for-Profit Hospitals

PubMed Central

Alexander, Jeffrey A; Lee, Shoou-Yih D

2006-01-01

As performance accountabilities, external oversight, and market competition among not-for-profit (NFP) hospitals have grown, governing boards have been given a more central leadership role. This article examines these boards' effectiveness, particularly how their configuration influenced a range of performance outcomes in NFP community hospitals. Results indicate that hospitals governed by boards using a corporate governance model, versus hospitals governed by philanthropic-style boards, were likely to be more efficient and have more admissions and a larger share of the local market. Occupancy and cash flow were generally unrelated to hospitals' governing board configuration. However, effects of governance configuration were more pronounced in freestanding and public NFP hospitals compared with system-affiliated and private NFP hospitals, respectively. PMID:17096640

An Analysis of the Stakeholder Model of Public Boards and the Case of School Governing Bodies in England and Wales

ERIC Educational Resources Information Center

Connolly, Michael; Farrell, Catherine; James, Christopher

2017-01-01

This article analyses the stakeholder model of boards that is widely used in public and third sector institutions in England and Wales. The central tenet of this model is that such institutions should be strategically led by individuals who are representative of and from the groups that have an interest in them. The article focuses in particular…

Victory for volunteerism? Scottish health board elections and participation in the welfare state.

PubMed

Greer, Scott L; Stewart, Ellen A; Wilson, Iain; Donnelly, Peter D

2014-04-01

This paper presents findings from a multimethod study of pilot elections held to choose members of health boards in the National Health Service in Scotland. We begin by proposing that much current public involvement practice is dominated by a volunteerist model, in which members of the public with time and skills to offer play essentially supportive and non-challenging roles within health care organizations. This model contrasts sharply with the adversarial, political model of electoral democracy. Nonetheless, drawing on a postal survey of voters, non-participant observation of Boards, and semi-structured interviews with candidates, elected Board members and other stakeholders, we demonstrate that the introduction of elections did not overcome the volunteerist slant of current public involvement with health care organizations. Far from offering a 'quick fix' for policymakers seeking to ensure accountability of health care organizations, elections may produce remarkably similar outcomes to existing mechanisms of public involvement. Copyright © 2014 Elsevier Ltd. All rights reserved.

2007 Beyond SBIR Phase II: Bringing Technology Edge to the Warfighter

DTIC Science & Technology

2007-08-23

Systems Trade-Off Analysis and Optimization Verification and Validation On-Board Diagnostics and Self - healing Security and Anti-Tampering Rapid...verification; Safety and reliability analysis of flight and mission critical systems On-Board Diagnostics and Self - Healing Model-based monitoring and... self - healing On-board diagnostics and self - healing ; Autonomic computing; Network intrusion detection and prevention Anti-Tampering and Trust

View of button board which accommodates the 1200 button switches ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of button board which accommodates the 1200 button switches which manually control the indicating pilot lights on the model board. Not all switches are active, some switches were installed for a planned, but never constructed, system expansion. - Thirtieth Street Station, Load Dispatch Center, Thirtieth & Market Streets, Railroad Station, Amtrak (formerly Pennsylvania Railroad Station), Philadelphia, Philadelphia County, PA

Estimating the Returns to Urban Boarding Schools: Evidence from SEED. NBER Working Paper No. 16746

ERIC Educational Resources Information Center

Curto, Vilsa E.; Fryer, Roland G., Jr.

2011-01-01

The SEED schools, which combine a "No Excuses'' charter model with a five-day-a-week boarding program, are America's only urban public boarding schools for the poor. We provide the first causal estimate of the impact of attending SEED schools on academic achievement, with the goal of understanding whether changing a student's environment through…

You Sunk My Constitution: Using a Popular Off-the-Shelf Board Game to Simulate Political Concepts

ERIC Educational Resources Information Center

Bridge, Dave

2014-01-01

Using an example, this article demonstrates how instructors can make use of popular off-the-shelf board games to model politics. I show how the rules of the popular board game "Battleship" can be manipulated to simulate centralization of power and, more specifically, the differences between the Articles of Confederation and the…

Salaries of New Superintendents: A Public Relations Concern for Many Public School Boards

ERIC Educational Resources Information Center

Young, I. Phillip

2007-01-01

Salaries for new superintendents form a highly visible factor that has direct implications for school-community public relations. To provide a means for guiding school board members and to provide a format for justifying salaries, a model is presented that serves both purposes. Within this model, attention is afforded to specifying a relevant…

Guidelines for Evaluating a Superintendent (To Assist School Board Members in Planning and in Evaluation).

ERIC Educational Resources Information Center

California School Boards Association, Sacramento.

This publication is intended to aid local school board members in establishing procedures and priorities for evaluating the performance of their district superintendent. Except for a brief introductory section, the entire publication consists of a model comprehensive evaluation instrument. The evaluation model is organized in two main sections,…

Method for Designing Electronic Assemblies without Potting for Gun Launched Applications Through the Use of Additive Manufacturing

DTIC Science & Technology

2016-12-01

easily would be preferred. Many studies have been conducted to model the effects of potting materials on PCBs and their components: two such studies ...catch (SCAT) gun Guidance electronics On -board recorder (OBR) Precision guided munition (PGM) 16. SECURITY CLASSIFICATION OF: 17... On -board Recorder 2 Initial Method - Modeling Assumptions 2 Initial Method - Parts, Instances, and Simplifications in the Model 3 Initial Method

3D in the Fast Lane: Render as You Go with the Latest OpenGL Boards.

ERIC Educational Resources Information Center

Sauer, Jeff; Murphy, Sam

1997-01-01

NT OpenGL hardware allows modelers and animators to work at relatively inexpensive NT workstations in their own offices or homes previous to shared space and workstation time in expensive studios. Rates seven OpenGL boards and two QuickDraw 3D accelerator boards for Mac users on overall value, wireframe and texture rendering, 2D acceleration, and…

Increasing a Community College Governing Board's Engagement in Accountability for Student Success: What Are the Principal Influences?

ERIC Educational Resources Information Center

Welsh, Linda Susan Anderson

2010-01-01

Understanding the factors that influence a community college governing board to increase its engagement in accountability for student success was the purpose of this grounded theory case study. A further aim was to develop a model that described how these factors interact. A highly engaged community college governing board, as defined by a focus,…

National Board Certification and Teacher Effectiveness: Evidence from Washington. CEDR Working Paper. WP #2015-3

ERIC Educational Resources Information Center

Cowan, James; Goldhaber, Dan

2015-01-01

We study the effectiveness of teachers certified by the National Board for Professional Teaching Standards (NBPTS) in Washington State, which has one of the largest populations of National Board Certified Teachers (NBCTs) in the nation. Based on value-added models in math and reading, we find that NBPTS certified teachers are about 0.01-0.05…

Green lumber grade yields from black cherry and red maple factory grade logs sawed at band and circular mills

Treesearch

Daniel A. Yaussy

1989-01-01

Multivariate regression models were developed to predict green board-foot yields (1 board ft. = 2.360 dm 3) for the standard factory lumber grades processed from black cherry (Prunus serotina Ehrh.) and red maple (Acer rubrum L.) factory grade logs sawed at band and circular sawmills. The models use log...

Model Debate for the Yellow Book Learning in Islamic Boarding School

ERIC Educational Resources Information Center

Apdoludin; Saidek, Abdul Rahim; Islami, Raisul

2016-01-01

This study aimed to determine the effect model of debate in the yellow book learning in schools to improve students' critical thinking skills so they can find a new science. This study was an experimental study with a control group. The study was conducted in classes XI Islamic Boarding School Al-Hidayah Jambi. This study uses two parallel…

Advanced Control Considerations for Turbofan Engine Design

NASA Technical Reports Server (NTRS)

Connolly, Joseph W.; Csank, Jeffrey T.; Chicatelli, Amy

2016-01-01

This paper covers the application of a model-based engine control (MBEC) methodology featuring a self tuning on-board model for an aircraft turbofan engine simulation. The nonlinear engine model is capable of modeling realistic engine performance, allowing for a verification of the advanced control methodology over a wide range of operating points and life cycle conditions. The on-board model is a piece-wise linear model derived from the nonlinear engine model and updated using an optimal tuner Kalman Filter estimation routine, which enables the on-board model to self-tune to account for engine performance variations. MBEC is used here to show how advanced control architectures can improve efficiency during the design phase of a turbofan engine by reducing conservative operability margins. The operability margins that can be reduced, such as stall margin, can expand the engine design space and offer potential for efficiency improvements. Application of MBEC architecture to a nonlinear engine simulation is shown to reduce the thrust specific fuel consumption by approximately 1% over the baseline design, while maintaining safe operation of the engine across the flight envelope.

Model-Based Control of a Nonlinear Aircraft Engine Simulation using an Optimal Tuner Kalman Filter Approach

NASA Technical Reports Server (NTRS)

Connolly, Joseph W.; Csank, Jeffrey Thomas; Chicatelli, Amy; Kilver, Jacob

2013-01-01

This paper covers the development of a model-based engine control (MBEC) methodology featuring a self tuning on-board model applied to an aircraft turbofan engine simulation. Here, the Commercial Modular Aero-Propulsion System Simulation 40,000 (CMAPSS40k) serves as the MBEC application engine. CMAPSS40k is capable of modeling realistic engine performance, allowing for a verification of the MBEC over a wide range of operating points. The on-board model is a piece-wise linear model derived from CMAPSS40k and updated using an optimal tuner Kalman Filter (OTKF) estimation routine, which enables the on-board model to self-tune to account for engine performance variations. The focus here is on developing a methodology for MBEC with direct control of estimated parameters of interest such as thrust and stall margins. Investigations using the MBEC to provide a stall margin limit for the controller protection logic are presented that could provide benefits over a simple acceleration schedule that is currently used in traditional engine control architectures.

A study on the real-time reliability of on-board equipment of train control system

NASA Astrophysics Data System (ADS)

Zhang, Yong; Li, Shiwei

2018-05-01

Real-time reliability evaluation is conducive to establishing a condition based maintenance system for the purpose of guaranteeing continuous train operation. According to the inherent characteristics of the on-board equipment, the connotation of reliability evaluation of on-board equipment is defined and the evaluation index of real-time reliability is provided in this paper. From the perspective of methodology and practical application, the real-time reliability of the on-board equipment is discussed in detail, and the method of evaluating the realtime reliability of on-board equipment at component level based on Hidden Markov Model (HMM) is proposed. In this method the performance degradation data is used directly to realize the accurate perception of the hidden state transition process of on-board equipment, which can achieve a better description of the real-time reliability of the equipment.

A theoretical and experimental study of wood planer noise and its control

NASA Technical Reports Server (NTRS)

Stewart, J. S.

1972-01-01

A combined analytical and experimental study of wood planer noise is made and the results applied to the development of practical noise control techniques. The dominant mechanisms of sound generation are identified and an analysis is presented which accurately predicts the governing levels of noise emission. Planing operations in which the length of the board is much greater than the width are considered. The dominant source of planer noise is identified as the board being surfaced, which is set into vibration by the impact of cutterhead knives. This is determined from studies made both in the laboratory and in the field concerning the effect of board width on the resulting noise, which indicate a six decibel increase in noise level for each doubling of board width. The theoretical development of a model for board vibration defines the vibrational field set up in the board and serves as a guide for cutterhead redesign.

Hydrodynamic characteristics of the double-winged otter board in the deep waters of the Mauritanian Sea

NASA Astrophysics Data System (ADS)

Su, Xin; Lu, Huosheng; Feng, Bo; Chen, Qiujie; Yan, Yunrong

2017-09-01

In this paper, we tested the hydrodynamic characteristics of a new, double-winged otter board that consists of a forewing, a leading edge slat and a trailing edge flap. Flume experiments were conducted in a circulating flume tank by using a model with an aspect ratio (AR) of 0.85 and a horizontal planform area (S) of 0.09 m2. The results indicated that the critical angle (αcr) of the model was 44°, whereas the maximum lift coefficient (C Lmax) was up to 1.715, and the door efficiency (K) was 1.122. The attack angle (α) ranged from 30° to 48° and from 10° to 46° when the lift coefficient (C L) and door efficiency (K) were greater than 1.2 and 1.0, respectively. To compare the difference between double-winged otter board and traditional Morgere Polyvalent Ovale, same model of Morgere Polyvalent Ovale was also tested under the same experimental conditions. The critical angle (αcr) and maximum of lift coefficient (C Lmax) of the doublewinged otter board were 37.5% and 14.6% larger than those of the Morgere Polyvalent Ovale. Therefore, we concluded that the novel, double-winged otter board was more suitable for bottom trawling fisheries in the deep water of the Mauretania Sea due to its better hydrodynamic characteristics and stability.

The Vulnerability, Impacts, Adaptation and Climate Services Advisory Board (VIACS AB V1.0) Contribution to CMIP6

NASA Technical Reports Server (NTRS)

Ruane, Alex C.; Teichmann, Claas; Arnell, Nigel W.; Carter, Timothy R.; Ebi, Kristie L.; Frieler, Katja; Goodess, Clare M.; Hewitson, Bruce; Horton, Radley; Kovats, R. Sari;

The Vulnerability, Impacts, Adaptation and Climate Services Advisory Board (VIACS AB v1.0) contribution to CMIP6

NASA Astrophysics Data System (ADS)

Ruane, Alex C.; Teichmann, Claas; Arnell, Nigel W.; Carter, Timothy R.; Ebi, Kristie L.; Frieler, Katja; Goodess, Clare M.; Hewitson, Bruce; Horton, Radley; Sari Kovats, R.; Lotze, Heike K.; Mearns, Linda O.; Navarra, Antonio; Ojima, Dennis S.; Riahi, Keywan; Rosenzweig, Cynthia; Themessl, Matthias; Vincent, Katharine

2016-09-01

This paper describes the motivation for the creation of the Vulnerability, Impacts, Adaptation and Climate Services (VIACS) Advisory Board for the Sixth Phase of the Coupled Model Intercomparison Project (CMIP6), its initial activities, and its plans to serve as a bridge between climate change applications experts and climate modelers. The climate change application community comprises researchers and other specialists who use climate information (alongside socioeconomic and other environmental information) to analyze vulnerability, impacts, and adaptation of natural systems and society in relation to past, ongoing, and projected future climate change. Much of this activity is directed toward the co-development of information needed by decision-makers for managing projected risks. CMIP6 provides a unique opportunity to facilitate a two-way dialog between climate modelers and VIACS experts who are looking to apply CMIP6 results for a wide array of research and climate services objectives. The VIACS Advisory Board convenes leaders of major impact sectors, international programs, and climate services to solicit community feedback that increases the applications relevance of the CMIP6-Endorsed Model Intercomparison Projects (MIPs). As an illustration of its potential, the VIACS community provided CMIP6 leadership with a list of prioritized climate model variables and MIP experiments of the greatest interest to the climate model applications community, indicating the applicability and societal relevance of climate model simulation outputs. The VIACS Advisory Board also recommended an impacts version of Obs4MIPs and indicated user needs for the gridding and processing of model output.

A Synthetic Study on the Resolution of 2D Elastic Full Waveform Inversion

NASA Astrophysics Data System (ADS)

Cui, C.; Wang, Y.

2017-12-01

Gradient based full waveform inversion is an effective method in seismic study, it makes full use of the information given by seismic records and is capable of providing a more accurate model of the interior of the earth at a relatively low computational cost. However, the strong non-linearity of the problem brings about many difficulties in the assessment of its resolution. Synthetic inversions are therefore helpful before an inversion based on real data is made. Checker-board test is a commonly used method, but it is not always reliable due to the significant difference between a checker-board and the true model. Our study aims to provide a basic understanding of the resolution of 2D elastic inversion by examining three main factors that affect the inversion result respectively: 1. The structural characteristic of the model; 2. The level of similarity between the initial model and the true model; 3. The spacial distribution of sources and receivers. We performed about 150 synthetic inversions to demonstrate how each factor contributes to quality of the result, and compared the inversion results with those achieved by checker-board tests. The study can be a useful reference to assess the resolution of an inversion in addition to regular checker-board tests, or to determine whether the seismic data of a specific region is sufficient for a successful inversion.

Proposed reporting model update creates dialogue between FASB and not-for-profits.

PubMed

Mosrie, Norman C

2016-04-01

Seeing a need to refresh the current guidelines, the Financial Accounting Standards Board (FASB) proposed an update to the financial accounting and reporting model for not-for-profit entities. In a response to solicited feedback, the board is now revisiting its proposed update and has set forth a plan to finalize its new guidelines. The FASB continues to solicit and respond to feedback as the process progresses.

View northeast of model board representing northern portion of trackage ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View northeast of model board representing northern portion of trackage monitored by the Philadelphia poer directors center; free-standing cabinet at far right center of photograph is an early computer which supplanted operator control from Lamokin Tower in the 1980's; switchboard console #1 for controlling indicating lights is at lower right - Thirtieth Street Station, Power Director Center, Thirtieth & Market Streets in Amtrak Railroad Station, Philadelphia, Philadelphia County, PA

Wind-Tunnel Tests of the 1/25-Scale Powered Model of the Martin JRM-1 Airplane. IV - Tests with Ground Board and with Modified Wing and Hull - TED No. NACA 232. Part 4; Tests with Ground Board and with Modified Wing and Hull, TED No. NACA 232

NASA Technical Reports Server (NTRS)

Lockwood, Vernard E.; Smith, Bernard J.

1947-01-01

Wind-tunnel tests were made of a 1/25 scale model of the Martin JRM-1 airplane to determine: (1) The longitudinal stability and control characteristics of the JRM-1 model near the water and lateral and directional stability characteristics with power while moving on the surface of the water, the latter being useful for the design of tip floats; (2) The stability and stalling characteristics of the wing with a modified airfoil contour; (3) Stability characteristics of a hull of larger design gross weight; The test results indicated that the elevator was powerful enough to trim the original model in a landing configuration at any lift coefficient within the specified range of centers of gravity. The ground-board tests for evaluating the aerodynamic forces and moments on an airplane in a simulated cross wind indicate a high dihedral effect in the presence of the ground board and, consequently, during low-speed taxying and take-off, large overturning moments would result which would have to be overcome by the tip floats.

Numerical analysis of Eucalyptus grandis × E. urophylla heat-treatment: A dynamically detecting method of mass loss during the process

NASA Astrophysics Data System (ADS)

Zhao, Zijian; Ma, Qing; Mu, Jun; Yi, Songlin; He, Zhengbin

Eucalyptus particles, lamellas and boards were applied to explore a simply-implemented method with neglected heat and mass transfer to inspect the mass loss during the heat-treatment course. The results revealed that the mass loss of a certain period was theoretically the definite integration of loss rate to time in this period, and a monitoring model for mass loss speed was developed with the particles and validated with the lamellas and boards. The loss rate was correlated to the temperature and temperature-evolving speed in the model which was composed of three functions during different temperature-evolving period. The sample mass loss was calculated in the MATLAB for the lamellas and boards and the model was validated and adjusted based on the difference between the computed results and the practically measured loss values. The error ranges of the new models were -16.30% to 18.35% for wood lamellas and -9.86% to 6.80% for wood boards. This method made it possible to acquire the instantaneous loss value through continuously detecting the wood temperature evolution. This idea could provide a reference for the Eucalyptus heat-treatment to detect the treating course and control the final material characteristics.

Fresh water green microalga Scenedesmus abundans: A potential feedstock for high quality biodiesel production.

PubMed

Mandotra, S K; Kumar, Pankaj; Suseela, M R; Ramteke, P W

2014-03-01

Present investigation studied the potential of fresh water green microalga Scenedesmus abundans as a feedstock for biodiesel production. To study the biomass and lipid yield, the culture was grown in BBM, Modified CHU-13 and BG-11 medium. Among the tested nitrogen concentration using Modified CHU-13 medium, the highest biomass and lipid yield of 1.113±0.05g/L and 489±23mg/L respectively was found in the culture medium with 0.32g/L of nitrogen (KNO3). Different lipid extraction as well as transesterification methods were also tested. Fatty acid profile of alga grown in large scale indigenous made photobioreactor has shown abundance of fatty acids with carbon chain length of C16 and C18. Various biodiesel properties such as cetane number, iodine value and saponification value were found to be in accordance with Brazilian National Petroleum Agency (ANP255) and European biodiesel standard EN14214 which makes S. abundans as a potential feedstock for biodiesel production. Copyright © 2014 Elsevier Ltd. All rights reserved.

Enhanced Self Tuning On-Board Real-Time Model (eSTORM) for Aircraft Engine Performance Health Tracking

NASA Technical Reports Server (NTRS)

Volponi, Al; Simon, Donald L. (Technical Monitor)

2008-01-01

A key technological concept for producing reliable engine diagnostics and prognostics exploits the benefits of fusing sensor data, information, and/or processing algorithms. This report describes the development of a hybrid engine model for a propulsion gas turbine engine, which is the result of fusing two diverse modeling methodologies: a physics-based model approach and an empirical model approach. The report describes the process and methods involved in deriving and implementing a hybrid model configuration for a commercial turbofan engine. Among the intended uses for such a model is to enable real-time, on-board tracking of engine module performance changes and engine parameter synthesis for fault detection and accommodation.

An active balance board system with real-time control of stiffness and time-delay to assess mechanisms of postural stability.

PubMed

Cruise, Denise R; Chagdes, James R; Liddy, Joshua J; Rietdyk, Shirley; Haddad, Jeffrey M; Zelaznik, Howard N; Raman, Arvind

2017-07-26

Increased time-delay in the neuromuscular system caused by neurological disorders, concussions, or advancing age is an important factor contributing to balance loss (Chagdes et al., 2013, 2016a,b). We present the design and fabrication of an active balance board system that allows for a systematic study of stiffness and time-delay induced instabilities in standing posture. Although current commercial balance boards allow for variable stiffness, they do not allow for manipulation of time-delay. Having two controllable parameters can more accurately determine the cause of balance deficiencies, and allows us to induce instabilities even in healthy populations. An inverted pendulum model of human posture on such an active balance board predicts that reduced board rotational stiffness destabilizes upright posture through board tipping, and limit cycle oscillations about the upright position emerge as feedback time-delay is increased. We validate these two mechanisms of instability on the designed balance board, showing that rotational stiffness and board time-delay induced the predicted postural instabilities in healthy, young adults. Although current commercial balance boards utilize control of rotational stiffness, real-time control of both stiffness and time-delay on an active balance board is a novel and innovative manipulation to reveal balance deficiencies and potentially improve individualized balance training by targeting multiple dimensions contributing to standing balance. Copyright © 2017 Elsevier Ltd. All rights reserved.

Should nutrient profile models be 'category specific' or 'across-the-board'? A comparison of the two systems using diets of British adults.

PubMed

Scarborough, P; Arambepola, C; Kaur, A; Bhatnagar, P; Rayner, M

2010-06-01

Nutrient profile models have the potential to help promote healthier diets. Some models treat all foods equally (across-the-board), some consider different categories of foods separately (category specific). This paper assesses whether across-the-board or category-specific nutrient profile models are more appropriate tools for improving diets. Adult respondents to a British dietary survey were split into four groups using a diet quality index. Fifteen food categories were identified. A nutrient profile model provided a measure of the healthiness of all foods consumed. The four diet quality groups were compared for differences in (a) the calories consumed from each food category and (b) the healthiness of foods consumed in each category. Evidence of healthier diet quality groups consuming more of healthy food categories than unhealthy diet quality groups supported the adoption of across-the-board nutrient profile models. Evidence of healthier diet quality groups consuming healthier versions of foods within food categories supported adoption of category-specific nutrient profile models. A significantly greater percentage of the healthiest diet quality group's diet consisted of fruit and vegetables (21 vs 16%), fish (3 vs 2%) and breakfast cereals (7 vs 2%), and significantly less meat and meat products (7 vs 14%) than the least healthy diet quality group. The foods from the meat, dairy and cereals categories consumed by the healthy diet quality groups were healthier versions than those consumed by the unhealthy diet quality groups. All other things being equal, nutrient profile models designed to promote an achievable healthy diet should be category specific but with a limited number of categories. However models which use a large number of categories are unhelpful for promoting a healthy diet.

The n-by-T Target Discharge Strategy for Inpatient Units.

PubMed

Parikh, Pratik J; Ballester, Nicholas; Ramsey, Kylie; Kong, Nan; Pook, Nancy

2017-07-01

Ineffective inpatient discharge planning often causes discharge delays and upstream boarding. While an optimal discharge strategy that works across all units at a hospital is likely difficult to identify and implement, a strategy that provides a reasonable target to the discharge team appears feasible. We used observational and retrospective data from an inpatient trauma unit at a Level 2 trauma center in the Midwest US. Our proposed novel n-by-T strategy-discharge n patients by the Tth hour-was evaluated using a validated simulation model. Outcome measures included 2 measures: time-based (mean discharge completion and upstream boarding times) and capacity-based (increase in annual inpatient and upstream bed hours). Data from the pilot implementation of a 2-by-12 strategy at the unit was obtained and analyzed. The model suggested that the 1-by-T and 2-by-T strategies could advance the mean completion times by over 1.38 and 2.72 h, respectively (for 10 AM ≤ T ≤ noon, occupancy rate = 85%); the corresponding mean boarding time reductions were nearly 11% and 15%. These strategies could increase the availability of annual inpatient and upstream bed hours by at least 2,469 and 500, respectively. At 100% occupancy rate, the hospital-favored 2-by-12 strategy reduced the mean boarding time by 26.1%. A pilot implementation of the 2-by-12 strategy at the unit corroborated with the model findings: a 1.98-h advancement in completion times (P<0.0001) and a 14.5% reduction in boarding times (P = 0.027). Target discharge strategies, such as the n-by-T, can help substantially reduce discharge lateness and upstream boarding, especially during high unit occupancy. To sustain implementation, necessary commitment from the unit staff and physicians is vital, and may require some training.

24 CFR 3285.804 - Bottom board repair.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Bottom board repair. 3285.804 Section 3285.804 Housing and Urban Development Regulations Relating to Housing and Urban Development... URBAN DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Exterior and Interior Close-Up § 3285...

Using a multilevel mediation model to examine the effects of National Board Certified Teachers on high school science students' cognitive engagement

NASA Astrophysics Data System (ADS)

Zaleski, Diana Janet

2011-12-01

The National Board for Professional Teaching Standards claims to identify effective educators through their certification process. However, research concerning National Board Certified Teachers (NBCT) is inconclusive. The purpose of this study was to examine the direct and indirect effects of NBCT on the cognitive engagement of high school science students. Multilevel mediation modeling was used to examine the direct and indirect effects of teacher certification on students' cognitive engagement in science and whether students' expectancies for success and perceptions of task value mediate these effects. Students of NBCT were found to be more cognitively engaged in science than students of non-NBCT; however, students' expectancies for success and perceptions of task value did not mediate this relationship. In addition, students with more positive expectancies for success and perceptions of task value were more cognitively engaged in science. These findings support the proposition that the National Board certification process at least identifies effective educators.

The specific diffusion behaviour in paper and migration modelling from recycled board into dry foodstuffs.

PubMed

Hauder, J; Benz, H; Rüter, M; Piringer, O-G

2013-01-01

Recycled board plays an important role in food packaging, but the great variety of organic impurities must be considered as potential food contaminants. The diffusion behaviour of the impurities is significantly different from that in plastic materials. The two-layer concept for paper and board introduced recently is now treated in more detail. In the rate-determining surface region the diffusion coefficients of the n-alkanes in the homologous series with 15-35 carbon atoms decrease proportionally as their vapour pressures. This leads to a different equation of the diffusion coefficients in comparison with that for the core layer. Different polarities of the migrants have additional influences on the diffusion due to their interactions with the fibre matrix. A new analytical method for the quantification of aromatic impurities has previously been developed. Based on this method and on the described diffusion behaviour, a migration model for specific and global mass transfer of impurities from recycled board into dry food and food simulants is given.

Charter and Direct Run Schools of the Recovery School District (RSD) and Orleans Parish School Board (OPSB) Comparison of High Stakes Tests and Dropout Rates

ERIC Educational Resources Information Center

Andry, Beverly Guillory

2011-01-01

The city of New Orleans has embarked on an historic experiment reinventing its schools--once considered among the worst in the country--from a centralized, single district model of education to a two district model in which both the Recovery School District (RSD) and the preexisting Orleans Parish School Board (OPSB) both operate direct run and…

Livingstone Model-Based Diagnosis of Earth Observing One Infusion Experiment

NASA Technical Reports Server (NTRS)

Hayden, Sandra C.; Sweet, Adam J.; Christa, Scott E.

2004-01-01

The Earth Observing One satellite, launched in November 2000, is an active earth science observation platform. This paper reports on the progress of an infusion experiment in which the Livingstone 2 Model-Based Diagnostic engine is deployed on Earth Observing One, demonstrating the capability to monitor the nominal operation of the spacecraft under command of an on-board planner, and demonstrating on-board diagnosis of spacecraft failures. Design and development of the experiment, specification and validation of diagnostic scenarios, characterization of performance results and benefits of the model- based approach are presented.

Model-Based Control of an Aircraft Engine using an Optimal Tuner Approach

NASA Technical Reports Server (NTRS)

Connolly, Joseph W.; Chicatelli, Amy; Garg, Sanjay

2012-01-01

This paper covers the development of a model-based engine control (MBEC) method- ology applied to an aircraft turbofan engine. Here, a linear model extracted from the Commercial Modular Aero-Propulsion System Simulation 40,000 (CMAPSS40k) at a cruise operating point serves as the engine and the on-board model. The on-board model is up- dated using an optimal tuner Kalman Filter (OTKF) estimation routine, which enables the on-board model to self-tune to account for engine performance variations. The focus here is on developing a methodology for MBEC with direct control of estimated parameters of interest such as thrust and stall margins. MBEC provides the ability for a tighter control bound of thrust over the entire life cycle of the engine that is not achievable using traditional control feedback, which uses engine pressure ratio or fan speed. CMAPSS40k is capable of modeling realistic engine performance, allowing for a verification of the MBEC tighter thrust control. In addition, investigations of using the MBEC to provide a surge limit for the controller limit logic are presented that could provide benefits over a simple acceleration schedule that is currently used in engine control architectures.

Effects of a legal drain clean-out on wetlands and waterbirds: a recent case history

USGS Publications Warehouse

Krapu, Gary L.

1996-01-01

Repairs to legal drains in the United States may be regulated to protect adjacent wetlands under Section 404 of the Federal Water Pollution Control Act, commonly known as the Clean Water Act (CWA). However, few studies have examined effects of legal drain clean-outs on adjacent wetlands and associated migratory waterbird populations. I compare water regimes, cover-to-open water ratios, and waterbird use on Bruns, Big, Meszaros, and Kraft sloughs (BBMK) in Sargent County, North Dakota before and after the clean-out of Crete-Cogswell Drain No. 11, and relate wetland habitat loss to observed disease-related mortality among staging waterfowl in fall 1990 and spring 1991. Water regimes of BBMK were exceptionally stable, with few records of drawdowns before 1984 when the clean-out began. After the clean-out (1987-90), BBM were dry by mid-summer in all years and open area declined by 96% by 1990, whereas Kraft Slough (a control area) had water throughout all years and percent open area did not change. Numerous species of waterbirds nested in BBMK before the clean-out, and mean ranks of waterbird density were similar. After the clean-out, waterbirds failed to breed successfully in all years at BBM, and use as major waterfowl staging areas and for waterfowl hunting also ended. At Kraft Slough, use by breeding and staging waterbirds continued in all years, as did waterfowl hunting. Reduced access to fresh water after the Drain No. 11 clean-out may have contributed to a dieoff of 487 lesser snow geese (Chen caerulescens) from necrotic enteritis in Kraft Slough in November 1990. Loss of three major staging areas in Sargent County as a result of the drain clean-out has further concentrated migrant waterfowl, particularly during drought periods, increasing the magnitude of risk when epizootics occur in southeastern North Dakota. Ducks and geese banded in Sargent County have been recovered from 34 and 14 states, 7 and 6 provinces of Canada, and 13 and 1 other countries, respectively, indicating waterfowl populations from a wide area are potentially vulnerable to epizootics when crowded into limited roosting habitat. Despite causing the loss of wetland habitat for thousands of midcontinent waterfowl and other waterbirds, a Federal Court in North Dakota ruled that the clean-out of Drain No. 11 met the criteria necessary to be considered maintenance under Section 404 clause (f)(1)(c) and was not recaptured under clause (f)(2). This outcome suggests current law does not protect wetland functions needed to support migratory waterbird populations or associated recreational values when sites have become naturally restored through lack of maintenance of legal drains.

Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded, Ill, and Injured Members of the Armed Forces

DTIC Science & Technology

2011-09-02

manpower and staffing model for Physical Evaluation Board Liaison Officers (PEBLOs) and legal support. Ensure adequate PEBLO and legal staffing levels to...Function focus centrally on the restoration of the physical and mental health of the RW. In the trajectory toward recovery, rehabilitation, and...identified as going through the Medical Evaluation Board (MEB)/ Physical Evaluation Board (PEB) process,84 and a family liaison officer from the RW’s

Corporate and philanthropic models of hospital governance: a taxonomic evaluation.

PubMed

Weiner, B J; Alexander, J A

1993-08-01

We assess the theoretical integrity and practical utility of the corporate-philanthropic governance typology frequently invoked in debates about the appropriate form of governance for nonprofit hospitals operating in increasingly competitive health care environments. Data were obtained from a 1985 national mailed survey of nonprofit hospitals conducted by the American Hospital Association (AHA) and the Hospital Research and Educational Trust (HRET). A sample 1,577 nonprofit community hospitals were selected for study. Representativeness was assessed by comparing the sample with the population of non-profit community hospitals on the dimensions of bed size, ownership type, urban-rural location, multihospital system membership, and census region. Measurement of governance types was based on hospital governance attributes conforming to those cited in the literature as distinguishing corporate from philanthropic models and classified into six central dimensions of governance: (1) size, (2) committee structure and activity, (3) board member selection, (4) board composition, (5) CEO power and influence, and (6) bylaws and activities. Cluster analysis and ANCOVA indicated that hospital board forms adhered only partially to corporate and philanthropic governance models. Further, board forms varied systematically by specific organizational and environmental conditions. Boards exhibiting more corporate governance forms were more likely to be large, privately owned, urban, and operating in competitive markets than were hospitals showing more philanthropic governance forms. Findings suggest that the corporate-philanthropic governance distinction must be seen as an ideal rather than an actual depiction of hospital governance forms. Implications for health care governance are discussed.

Liaison and Logistics Work with Industrial Advisory Boards

ERIC Educational Resources Information Center

Michel, Kathryn K.

2014-01-01

One model for successful university research centers is based upon close collaboration with other organizations, including large and small companies as well as federal and state agencies. Collaborations of this nature often involve an Institutional Advisory Board (IAB), which can have significant responsibility for management and financial…

An exploration of NHS staff views on tuberculosis service delivery in Scottish NHS boards

PubMed Central

Spence, William

2013-01-01

Tuberculosis (TB) is a bacterial disease and major worldwide killer with an increased UK incidence rate. This study aimed to explore the views of National Health Service (NHS) staff on TB service delivery models of care in NHS boards across Scotland. Eighteen semi-structured interviews were conducted with 13 nurse specialists and five consultants in public health medicine (CPHM) across five Scottish NHS boards. Five main themes emerged and findings showed that: directly observed treatment (DOT) was provided only to patients assessed to be at high risk of poor treatment adherence; contact tracing was conducted by participating NHS boards but screening at ports was thought to be weak; all NHS boards implemented TB awareness campaigns for TB health professionals; three NHS boards conducted team meetings that monitored TB patient progress; participants believed that TB funding should be increased; contact tracing was routinely conducted by TB nurses. Improved TB screening at airports was recommended and a need for TB health education for high risk groups was identified. PMID:28989349

Evaluation of odometry algorithm performances using a railway vehicle dynamic model

NASA Astrophysics Data System (ADS)

Allotta, B.; Pugi, L.; Ridolfi, A.; Malvezzi, M.; Vettori, G.; Rindi, A.

2012-05-01

In modern railway Automatic Train Protection and Automatic Train Control systems, odometry is a safety relevant on-board subsystem which estimates the instantaneous speed and the travelled distance of the train; a high reliability of the odometry estimate is fundamental, since an error on the train position may lead to a potentially dangerous overestimation of the distance available for braking. To improve the odometry estimate accuracy, data fusion of different inputs coming from a redundant sensor layout may be used. Simplified two-dimensional models of railway vehicles have been usually used for Hardware in the Loop test rig testing of conventional odometry algorithms and of on-board safety relevant subsystems (like the Wheel Slide Protection braking system) in which the train speed is estimated from the measures of the wheel angular speed. Two-dimensional models are not suitable to develop solutions like the inertial type localisation algorithms (using 3D accelerometers and 3D gyroscopes) and the introduction of Global Positioning System (or similar) or the magnetometer. In order to test these algorithms correctly and increase odometry performances, a three-dimensional multibody model of a railway vehicle has been developed, using Matlab-Simulink™, including an efficient contact model which can simulate degraded adhesion conditions (the development and prototyping of odometry algorithms involve the simulation of realistic environmental conditions). In this paper, the authors show how a 3D railway vehicle model, able to simulate the complex interactions arising between different on-board subsystems, can be useful to evaluate the odometry algorithm and safety relevant to on-board subsystem performances.

--No Title--

Science.gov Websites

interoperability emerging infrastructure for data management on computational grids Software Packages Services : ATLAS: Management and Steering: Computing Management Board Software Project Management Board Database Model Group Computing TDR: 4.5 Event Data 4.8 Database and Data Management Services 6.3.4 Production and

Academic Collective Bargaining.

ERIC Educational Resources Information Center

Mortimer, Kenneth P.

1977-01-01

Issues concerning collective bargaining by college faculties, the bargaining team, and the board's role in bargaining are considered. Reasons why faculties want to bargain and principles that are pertinent to the transfer of the industrial model to the campus scene are examined. It is suggested that the board is the employer for private…

The Insulation Board Industry - An Economic Analysis

Treesearch

Albert T. Schuler

1978-01-01

An econometric model of the domestic insulation board industry was developed to identify and quantify the major factors affecting quantity consumed and price. The factors identified were housing starts, residential improvement activity, disposable personal income, productivity, pulpwood and residue prices, and power costs. Disposable personal income was the most...

Computerized technique for recording board defect data

Treesearch

R. Bruce Anderson; R. Edward Thomas; Charles J. Gatchell; Neal D. Bennett; Neal D. Bennett

1993-01-01

A computerized technique for recording board defect data has been developed that is faster and more accurate than manual techniques. The lumber database generated by this technique is a necessary input to computer simulation models that estimate potential cutting yields from various lumber breakdown sequences. The technique allows collection of detailed information...

EPA and California Air Resources Board Approve Remedy to Reduce Excess NOx Emissions from Automatic Transmission “Generation 2” 2.0-Liter Diesel Vehicles

EPA Pesticide Factsheets

On May 17, 2017, EPA and the California Air Resources Board (CARB) approved an emissions modification proposed by Volkswagen that will reduce NOx emissions from automatic transmission diesel Passats for model years 2012-2014.

Career pathways of board-certified surgeons in Japan.

PubMed

Koike, Soichi; Shimizu, Atsushi; Matsumoto, Masatoshi; Ide, Hiroo; Atarashi, Hidenao; Yasunaga, Hideo

2016-06-01

To investigate the career pathways of board-certified surgeons' and the factors associated with them maintaining their certification in Japan. We analyzed data from the surveys of physicians, dentists and pharmacists. A multivariate logistic regression model was used to investigate whether factors such as gender, year of registration, place of work, and subspecialty board certification were associated with maintaining board certification. Most Japanese surgeons attain board certification within 5-10 years of initial medical registration. After adjusting for possible confounding factors, the odds of maintaining board certification were significantly lower for women, those who were beyond 20 years post-registration, those who worked in hospitals other than academic hospitals or clinics, and those who had board certification in surgery only. Of the total board-certified surgeons analyzed, 93.2 % continued to work in hospitals and 2.8 % moved to clinics within 2 years. Of those who moved from hospitals to clinics, half continued to practice surgery, while nearly 40 % changed their specialty to internal medicine. It is necessary to establish a special training system for mature surgeons who move from surgery to general practice later in their careers. As the number of female surgeon increases, a support system is also required to secure the future supply of surgeons.

Diversity begets diversity: A global perspective on gender equality in scientific society leadership

PubMed Central

Burdfield-Steel, Emily; Potvin, Jacqueline M.; Heap, Stephen M.

2018-01-01

Research shows that gender inequality is still a major issue in academic science, yet academic societies may serve as underappreciated and effective avenues for promoting female leadership. That is, society membership is often self-selective, and board positions are elected (with a high turnover compared to institutions)—these characteristics, among others, may thus create an environment conducive to gender equality. We therefore investigate this potential using an information-theoretic approach to quantify gender equality (male:female ratios) in zoology society boards around the world. We compare alternative models to analyze how society characteristics might predict or correlate with the proportion of female leaders, and find that a cultural model, including society age, size of board and whether or not a society had an outward commitment or statement of equality, was the most informative predictor for the gender ratio of society boards and leadership positions. This model was more informative than alternatives that considered, for instance, geographic location, discipline of study or taxonomic focus. While women were more highly represented in society leadership than in institutional academic leadership, this representation was still far short of equal (~30%): we thus also provide a checklist and recommendations for societies to contribute to global gender equality in science. PMID:29847591

Diversity begets diversity: A global perspective on gender equality in scientific society leadership.

PubMed

Potvin, Dominique A; Burdfield-Steel, Emily; Potvin, Jacqueline M; Heap, Stephen M

2018-01-01

Research shows that gender inequality is still a major issue in academic science, yet academic societies may serve as underappreciated and effective avenues for promoting female leadership. That is, society membership is often self-selective, and board positions are elected (with a high turnover compared to institutions)-these characteristics, among others, may thus create an environment conducive to gender equality. We therefore investigate this potential using an information-theoretic approach to quantify gender equality (male:female ratios) in zoology society boards around the world. We compare alternative models to analyze how society characteristics might predict or correlate with the proportion of female leaders, and find that a cultural model, including society age, size of board and whether or not a society had an outward commitment or statement of equality, was the most informative predictor for the gender ratio of society boards and leadership positions. This model was more informative than alternatives that considered, for instance, geographic location, discipline of study or taxonomic focus. While women were more highly represented in society leadership than in institutional academic leadership, this representation was still far short of equal (~30%): we thus also provide a checklist and recommendations for societies to contribute to global gender equality in science.

Fault Diagnostics for Turbo-Shaft Engine Sensors Based on a Simplified On-Board Model

PubMed Central

Lu, Feng; Huang, Jinquan; Xing, Yaodong

2012-01-01

Combining a simplified on-board turbo-shaft model with sensor fault diagnostic logic, a model-based sensor fault diagnosis method is proposed. The existing fault diagnosis method for turbo-shaft engine key sensors is mainly based on a double redundancies technique, and this can't be satisfied in some occasions as lack of judgment. The simplified on-board model provides the analytical third channel against which the dual channel measurements are compared, while the hardware redundancy will increase the structure complexity and weight. The simplified turbo-shaft model contains the gas generator model and the power turbine model with loads, this is built up via dynamic parameters method. Sensor fault detection, diagnosis (FDD) logic is designed, and two types of sensor failures, such as the step faults and the drift faults, are simulated. When the discrepancy among the triplex channels exceeds a tolerance level, the fault diagnosis logic determines the cause of the difference. Through this approach, the sensor fault diagnosis system achieves the objectives of anomaly detection, sensor fault diagnosis and redundancy recovery. Finally, experiments on this method are carried out on a turbo-shaft engine, and two types of faults under different channel combinations are presented. The experimental results show that the proposed method for sensor fault diagnostics is efficient. PMID:23112645

Fault diagnostics for turbo-shaft engine sensors based on a simplified on-board model.

PubMed

Lu, Feng; Huang, Jinquan; Xing, Yaodong

2012-01-01

Combining a simplified on-board turbo-shaft model with sensor fault diagnostic logic, a model-based sensor fault diagnosis method is proposed. The existing fault diagnosis method for turbo-shaft engine key sensors is mainly based on a double redundancies technique, and this can't be satisfied in some occasions as lack of judgment. The simplified on-board model provides the analytical third channel against which the dual channel measurements are compared, while the hardware redundancy will increase the structure complexity and weight. The simplified turbo-shaft model contains the gas generator model and the power turbine model with loads, this is built up via dynamic parameters method. Sensor fault detection, diagnosis (FDD) logic is designed, and two types of sensor failures, such as the step faults and the drift faults, are simulated. When the discrepancy among the triplex channels exceeds a tolerance level, the fault diagnosis logic determines the cause of the difference. Through this approach, the sensor fault diagnosis system achieves the objectives of anomaly detection, sensor fault diagnosis and redundancy recovery. Finally, experiments on this method are carried out on a turbo-shaft engine, and two types of faults under different channel combinations are presented. The experimental results show that the proposed method for sensor fault diagnostics is efficient.

Corporate and philanthropic models of hospital governance: a taxonomic evaluation.

PubMed Central

Weiner, B J; Alexander, J A

1993-01-01

OBJECTIVE. We assess the theoretical integrity and practical utility of the corporate-philanthropic governance typology frequently invoked in debates about the appropriate form of governance for nonprofit hospitals operating in increasingly competitive health care environments. DATA SOURCES. Data were obtained from a 1985 national mailed survey of nonprofit hospitals conducted by the American Hospital Association (AHA) and the Hospital Research and Educational Trust (HRET). STUDY DESIGN. A sample 1,577 nonprofit community hospitals were selected for study. Representativeness was assessed by comparing the sample with the population of non-profit community hospitals on the dimensions of bed size, ownership type, urban-rural location, multihospital system membership, and census region. DATA COLLECTION. Measurement of governance types was based on hospital governance attributes conforming to those cited in the literature as distinguishing corporate from philanthropic models and classified into six central dimensions of governance: (1) size, (2) committee structure and activity, (3) board member selection, (4) board composition, (5) CEO power and influence, and (6) bylaws and activities. PRINCIPAL FINDINGS. Cluster analysis and ANCOVA indicated that hospital board forms adhered only partially to corporate and philanthropic governance models. Further, board forms varied systematically by specific organizational and environmental conditions. Boards exhibiting more corporate governance forms were more likely to be large, privately owned, urban, and operating in competitive markets than were hospitals showing more philanthropic governance forms. CONCLUSIONS. Findings suggest that the corporate-philanthropic governance distinction must be seen as an ideal rather than an actual depiction of hospital governance forms. Implications for health care governance are discussed. PMID:8344823

School Board Policy As a Control Mechanism in Curriculum Challenges.

ERIC Educational Resources Information Center

Adler, Louise

1993-01-01

This journal article examines how school board policies are used to control the controversies that often surround curriculum challenges. Specific key provisions of model policies and actual policies from California are analyzed to suggest ideal policy provisions. In a longitudinal study, over 42 percent of the 1,000-plus school districts in…

A New IPCC Tier 4 Site-Specific Model for Landfill Methane Emissions Inclusive of Seasonal Methane Oxidation

USDA-ARS?s Scientific Manuscript database

This project was initiated in the U.S. by the California Energy Commission (CEC) in cooperation with the California Integrated Waste Management Board and the California Air Resources Board to develop improved methods for landfill methane emissions for the California greenhouse gas inventory. This 3-...

Understanding the Process; Financial Responsibilities of Governing Boards. User's Manual.

ERIC Educational Resources Information Center

Association of Governing Boards of Universities and Colleges, 1980

1980-01-01

A supplement to a slide presentation on financial responsibilities of governing boards, suitable for use at a trustee workshop, is presented. A flow of funds model which depicts the five major financial zones (acquisition, allocation, current fund, plant fund, and endowment and similar funds) is the visual devise used through the presentation.…

Compact, Rugged, and Low-Cost Wavelength-Versatile Burst Laser

DTIC Science & Technology

2015-04-20

rubber grommets. (Figure26) Performance Lasers Contract #: W911NF-13-C-0050 19 Figure 26– CAD model of case with grommets Another way to keep...populated with anodized parts. (Figure 37) Figure 37 – Multiple boards populated with anodized parts These boards were then fitted into the rubber mounted

Boarding Schools and Capital Benefits: Implications for Urban School Reform

ERIC Educational Resources Information Center

Bass, Lisa R.

2014-01-01

The author discusses the boarding school model as a schooling alternative to improve life chances for disadvantaged youth, particularly African American youth, by positively meeting their social and educational needs. Bourdieu, Coleman, and other social scientists purported that these needs can be better met by exposing students to social and…

Development of a Domain Analysis Model for Electronic Institutional Review Board Systems: A Feasibility Study

ERIC Educational Resources Information Center

He, Shan

2013-01-01

Clinical research plays a vital role in producing knowledge valuable for understanding human disease and improving healthcare quality. Human subject protection is an obligation essential to the clinical research endeavor, much of which is governed by federal regulations and rules. Institutional Review Boards (IRBs) are responsible for overseeing…

National Board Certified Physical Educators: Perceived Changes Related to the Certification Process

ERIC Educational Resources Information Center

Woods, Amelia Mays; Rhoades, Jesse Lee

2012-01-01

In this study, we examined National Board certified physical education teachers' (NBCPETs) perceptions of change as a result of certification. Randomly selected NBCPETs (65; women = 53, men = 12) were interviewed. Analysis was done through the lens of Lawson's (1989) Model of the Interactive Factors Influencing Workplace Conditions for the…

Applied Mathematical Optimization Technique on Menu Scheduling for Boarding School Student Using Delete-Reshuffle-Reoptimize Algorithm

NASA Astrophysics Data System (ADS)

Sufahani, Suliadi; Mohamad, Mahathir; Roslan, Rozaini; Ghazali Kamardan, M.; Che-Him, Norziha; Ali, Maselan; Khalid, Kamal; Nazri, E. M.; Ahmad, Asmala

2018-04-01

Boarding school student needs to eat well balanced nutritious food which includes proper calories, vitality and supplements for legitimate development, keeping in mind the end goal is to repair and support the body tissues and averting undesired ailments and disease. Serving healthier menu is a noteworthy stride towards accomplishing that goal. Be that as it may, arranging a nutritious and adjusted menu physically is confounded, wasteful and tedious. This study intends to build up a scientific mathematical model for eating routine arranging that improves and meets the vital supplement consumption for boarding school student aged 13-18 and in addition saving the financial plan. It likewise gives the adaptability for the cook to change any favoured menu even after the ideal arrangement has been produced. A recalculation procedure will be performed in view of the ideal arrangement. The information was gathered from the the Ministry of Education and boarding schools’ authorities. Menu arranging is a notable enhancement issue and part of well-established optimization problem. The model was fathomed by utilizing Binary Programming and “Delete-Reshuffle-Reoptimize Algortihm (DDRA)”.

Comment on "Time needed to board an airplane: a power law and the structure behind it".

PubMed

Bernstein, Noam

2012-08-01

Frette and Hemmer [Phys. Rev. E 85, 011130 (2012)] recently showed that for a simple model for the boarding of an airplane, the mean time to board scales as a power law with the number of passengers N and the exponent is less than 1. They note that this scaling leads to the prediction that the "back-to-front" strategy, where passengers are divided into groups from contiguous ranges of rows and each group is allowed to board in turn from back to front once the previous group has found their seats, has a longer boarding time than would a single group. Here I extend their results to a larger number of passengers using a sampling approach and explore a scenario where the queue is presorted into groups from back to front, but allowed to enter the plane as soon as they can. I show that the power law dependence on passenger numbers is different for large N and that there is a boarding time reduction for presorted groups, with a power law dependence on the number of presorted groups.

Implementation of an Integrated On-Board Aircraft Engine Diagnostic Architecture

NASA Technical Reports Server (NTRS)

Armstrong, Jeffrey B.; Simon, Donald L.

2012-01-01

An on-board diagnostic architecture for aircraft turbofan engine performance trending, parameter estimation, and gas-path fault detection and isolation has been developed and evaluated in a simulation environment. The architecture incorporates two independent models: a realtime self-tuning performance model providing parameter estimates and a performance baseline model for diagnostic purposes reflecting long-term engine degradation trends. This architecture was evaluated using flight profiles generated from a nonlinear model with realistic fleet engine health degradation distributions and sensor noise. The architecture was found to produce acceptable estimates of engine health and unmeasured parameters, and the integrated diagnostic algorithms were able to perform correct fault isolation in approximately 70 percent of the tested cases

Influencing and impacting the profession through governance opportunities.

PubMed

Drenkard, Karen N

2015-01-01

In addition to board leadership of health care organizations and corporations, there are strategic opportunities for nurses to participate in professional association boards and commissions and expert panels. These boards have specific and unique challenges and opportunities, and it is important for nurse leaders to serve in shaping the direction of the profession. Nursing as a profession has an opening to solve many of the care delivery issues that face the country. A strategic contribution to association boards and commissions can influence the health care delivery system changes needed to improve quality of care, access to care, and reducing costs. This article describes similarities and differences of service on association boards and commissions compared with organizational and corporate boards. Through these leadership roles, the larger community can observe influential nurses in an essential role. These leadership opportunities, including membership boards, commissions, and content expert panels, call for a special understanding of those governance structures and the contributions that nurse leaders can make to impact health care. Association and membership organizations have undergone many changes in the past 10 years, and new models of governance and leadership have been called into play. There are challenges and opportunities in serving on these boards and commissions. Maximizing the leadership and governance roles of this type of service is a critical contribution that nurses can make to impact the profession of nursing and the greater health care system.

PCBA depaneling stress minimization study

NASA Astrophysics Data System (ADS)

Darus, M. H. B. M.; Aziz, M. H. B. A.; Ong, N. R.; Alcain, J. B.; Retnasamy, V.

2017-09-01

Printed circuit board (PCB) is board that used to connect the electricity using the conductive pathways. The PCB that consists with electronic components was called as printed circuit board assembly (PCBA). Bending process has been used as one of the depaneling techniques may contribute to mechanical stress and the failure of capacitors and other components to function. As a result, the idea to create holes in particular location was implemented in order to absorb the stress. In this study, finite element analysis is demonstrated by using ANSYS software. Two PCBA design models are considered in order to investigate the effect of the hole and the stress response. The simulation results show that the hole on the PCBA has reduced the stress. For Design model 2, the stress response of the holes located vertically to the PCBA is lower than the holes located horizontally to the PCBA.

Applying an Experiential Learning Model to the Teaching of Gateway Strategy Board Games

ERIC Educational Resources Information Center

Sato, Aiko; de Haan, Jonathan

2016-01-01

The board game hobby has rapidly grown and evolved in recent years, but most of the non-digital games lack tips and tutorials and remain difficult to learn and teach effectively. In this project, we integrated a popular hobbyist approach to teaching modern strategy games with classical experiential learning elements (i.e., demonstration,…

37 CFR 41.47 - Oral hearing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... on and call the Board's attention to a recent court or Board opinion which could have an effect on the manner in which the appeal is decided. (k) Visual aids. Visual aids may be used at an oral hearing... copy of each visual aid (photograph in the case of an artifact, a model or an exhibit) for each judge...

BMC Medicine editorial board members on open access publishing.

PubMed

Carmont, Michael R; Lawn, Stephen D; Stray-Pedersen, Babill; Shoenfeld, Yehuda; Meier, Pascal

2014-01-21

In recognition of Open Access week (21st-27th October 2013), we asked some BMC Medicine Editorial Board Members to share their views and experiences on open access publishing. In this short video, they highlight the benefits of visibility and dissemination of their research, and discuss the future directions for this model of publishing.

BMC medicine editorial board members on open access publishing

PubMed Central

2014-01-01

In recognition of Open Access week (21st-27th October 2013), we asked some BMC Medicine Editorial Board Members to share their views and experiences on open access publishing. In this short video, they highlight the benefits of visibility and dissemination of their research, and discuss the future directions for this model of publishing. PMID:24447778

Sexual orientation and education politics: gay and lesbian representation in American schools.

PubMed

Wald, Kenneth D; Rienzo, Barbara A; Button, James W

2002-01-01

In what has sometimes provoked a "culture war" over America's schools, gays and lesbians have sought an expanded voice in the making of education policy. This paper explores the factors that promote gay representation on school boards, how this variable in turn influences gay representation in both administrative and teaching positions, and how all three forms of gay representation relate to school board policies regarding sexual orientation education. Three of the four models drawn from the social movement literature help to explain gay school board representation. In a manner similar to other minority groups, gay representation on school boards directly or indirectly promotes the appointment of gays to administrative and teaching positions and the adoption of policies that address the problems faced by gay and lesbian students in the public schools.

Baryon-Baryon Interactions ---Nijmegen Extended-Soft-Core Models---

NASA Astrophysics Data System (ADS)

Rijken, T. A.; Nagels, M. M.; Yamamoto, Y.

We review the Nijmegen extended-soft-core (ESC) models for the baryon-baryon (BB) interactions of the SU(3) flavor-octet of baryons (N, Lambda, Sigma, and Xi). The interactions are basically studied from the meson-exchange point of view, in the spirit of the Yukawa-approach to the nuclear force problem [H. Yukawa, ``On the interaction of Elementary Particles I'', Proceedings of the Physico-Mathematical Society of Japan 17 (1935), 48], using generalized soft-core Yukawa-functions. These interactions are supplemented with (i) multiple-gluon-exchange, and (ii) structural effects due to the quark-core of the baryons. We present in some detail the most recent extended-soft-core model, henceforth referred to as ESC08, which is the most complete, sophisticated, and successful interaction-model. Furthermore, we discuss briefly its predecessor the ESC04-model [Th. A. Rijken and Y. Yamamoto, Phys. Rev. C 73 (2006), 044007; Th. A. Rijken and Y. Yamamoto, Ph ys. Rev. C 73 (2006), 044008; Th. A. Rijken and Y. Yamamoto, nucl-th/0608074]. For the soft-core one-boson-exchange (OBE) models we refer to the literature [Th. A. Rijken, in Proceedings of the International Conference on Few-Body Problems in Nuclear and Particle Physics, Quebec, 1974, ed. R. J. Slobodrian, B. Cuec and R. Ramavataram (Presses Universitè Laval, Quebec, 1975), p. 136; Th. A. Rijken, Ph. D. thesis, University of Nijmegen, 1975; M. M. Nagels, Th. A. Rijken and J. J. de Swart, Phys. Rev. D 17 (1978), 768; P. M. M. Maessen, Th. A. Rijken and J. J. de Swart, Phys. Rev. C 40 (1989), 2226; Th. A. Rijken, V. G. J. Stoks and Y. Yamamoto, Phys. Rev. C 59 (1999), 21; V. G. J. Stoks and Th. A. Rijken, Phys. Rev. C 59 (1999), 3009]. All ingredients of these latter models are also part of ESC08, and so a description of ESC08 comprises all models so far in principle. The extended-soft-core (ESC) interactions consist of local- and non-local-potentials due to (i) one-boson-exchanges (OBE), which are the members of nonets of pseudo-scalar-, vector-, scalar-, and axial-mesons, (ii) diffractive (i.e. multiple-gluon) exchanges, (iii) two pseudo-scalar exchange (PS-PS), and (iv) meson-pair-exchange (MPE). The OBE- and pair-vertices are regulated by gaussian form factors producing potentials with a soft behavior near the origin. The assignment of the cutoff masses for the BBM-vertices is dependent on the SU(3)-classification of the exchanged mesons for OBE, and a similar scheme for MPE. The ESC-models ESC04 and ESC08 describe the nucleon-nucleon (NN), hyperon-nucleon (YN), and hyperon-hyperon (YY) interactions in a unified way using broken SU(3)-symmetry. Novel ingredients in the OBE-sector in the ESC-models are the inclusion of (i) the axial-vector meson potentials, (ii) a zero in the scalar- and axial-vector meson form factors. These innovations made it possible for the first time to keep the meson coupling parameters of the model qualitatively in accordance with the predictions of the (3P_0) quark-antiquark creation (QPC) model. This is also the case for the F/(F+D)-ratios. Furthermore, the introduction of the zero helped to avoid the occurrence of unwanted bound states in Lambda N. Broken SU(3)-symmetry serves to connect the NN and the YN channels, which leaves after fitting NN only a few free parameters for the determination of the YN-interactions. In particular, the meson-baryon coupling constants are calculated via SU(3) using the coupling constants of the NN oplus YN-analysis as input. In ESC04 medium strong flavor-symmetry-breaking (FSB) of the coupling constants was investigated, using the (3}P_{0) -model with a Gell-Mann-Okubo hypercharge breaking for the BBM-coupling. In ESC08 the couplings are kept SU(3)-symmetric. The charge-symmetry-breaking (CSB) in the Lambda p and Lambda n channels, which is an SU(2) isospin breaking, is included in the OBE-, TME-, and MPE-potentials. In ESC04 and ESC08 simultaneous fits to the NN- and the YN- scattering data have been achieved, using different options for the ESC-model. In particularly in ESC08 with single-sets of parameters excellent fits were obtained for the NN- and YN-data. For example, in the case of ESC08a'' we have: (i) For the selected 4233 NN-data with energies 0 ≤ T_{lab} ≤ 350 MeV, excellent results were obtained having chi(2/N_{data}) = 1.094. (ii) For the usual set of 35 YN-data and 3 Sigma(+p) cross-sections from a recent KEK-experiment E289 [H. Kanda et al., AIP Conf. Proc. 842 (2006), 501; H. Kanda, Measurement of the cross sections of Sigma(=p) elastic scattering, Ph. D. thesis, Department of Physics, Faculty of Science, Kyoto University, March 2007] the fit has chi(2}/YN_{data) ≈ 0.83. (iii) For YY there is a weak LambdaLambda-interaction, which successfully matches with t he Nagara-event [H. Takahashi et al., Phys. Rev. Lett. 87 (2001), 212502]. (iv) The nuclear Sigma and Xi well-dephts satisfy U_Sigma > 0 and U_Xi < 0. The predictions for the S = -2 (LambdaLambda, Xi N, LambdaSigma, SigmaSigma)-channels are the occurrences of an S = -2 bound states in the Xi N((3S_1-^3D_1,) I = 0,1)-channels.

Aeromedical Disposition and Waiver Consideration for ISS Crewmembers

NASA Technical Reports Server (NTRS)

Taddeo, Terrance

2012-01-01

Aeromedical certification of astronauts and cosmonauts traveling to the International Space Station is a multi?-tiered process that involv es standards agreed to by the partner agencies, and participation by the individual agency aeromedical boards and a multilateral space medi cine board. Medical standards are updated continually by a multilater al working group. The boards operate by consensus and strive to achie ve effective decision making through experience, medical judgment, medical evidence and risk modeling. The aim of the certification process is to minimize the risk to the ISS program of loss of mission object ives due to human health issues.

Application of the Ecosystem Diagnosis and Treatment Method to the Grande Ronde Model Watershed project : Final Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mobrand, Lars Erik; Lestelle, Lawrence C.

In the spring of 1994 a technical planning support project was initiated by the Grande Ronde Model Watershed Board of Directors (Board) with funding from the Bonneville Power Administration. The project was motivated by a need for a science based method for prioritizing restoration actions in the basin that would promote effectiveness and accountability. In this section the authors recall the premises for the project. The authors also present a set of recommendations for implementing a watershed planning process that incorporates a science-based framework to help guide decision making. This process is intended to assist the Grande Ronde Model Watershedmore » Board in its effort to plan and implement watershed improvement measures. The process would also assist the Board in coordinating its efforts with other entities in the region. The planning process is based on an approach for developing an ecosystem management strategy referred to as the Ecosystem Diagnosis and Treatment (EDT) method (Lichatowich et al. 1995, Lestelle et al. 1996). The process consists of an on-going planning cycle. Included in this cycle is an assessment of the ability of the watershed to support and sustain natural resources and other economic and societal values. This step in the process, which the authors refer to as the diagnosis, helps guide the development of actions (also referred to as treatments) aimed at improving the conditions of the watershed to achieve long-term objectives. The planning cycle calls for routinely reviewing and updating, as necessary, the basis for the diagnosis and other analyses used by the Board in adopting actions for implementation. The recommendations offered here address this critical need to habitually update the information used in setting priorities for action.« less

An Integrated Architecture for On-Board Aircraft Engine Performance Trend Monitoring and Gas Path Fault Diagnostics

NASA Technical Reports Server (NTRS)

Simon, Donald L.

2010-01-01

Aircraft engine performance trend monitoring and gas path fault diagnostics are closely related technologies that assist operators in managing the health of their gas turbine engine assets. Trend monitoring is the process of monitoring the gradual performance change that an aircraft engine will naturally incur over time due to turbomachinery deterioration, while gas path diagnostics is the process of detecting and isolating the occurrence of any faults impacting engine flow-path performance. Today, performance trend monitoring and gas path fault diagnostic functions are performed by a combination of on-board and off-board strategies. On-board engine control computers contain logic that monitors for anomalous engine operation in real-time. Off-board ground stations are used to conduct fleet-wide engine trend monitoring and fault diagnostics based on data collected from each engine each flight. Continuing advances in avionics are enabling the migration of portions of the ground-based functionality on-board, giving rise to more sophisticated on-board engine health management capabilities. This paper reviews the conventional engine performance trend monitoring and gas path fault diagnostic architecture commonly applied today, and presents a proposed enhanced on-board architecture for future applications. The enhanced architecture gains real-time access to an expanded quantity of engine parameters, and provides advanced on-board model-based estimation capabilities. The benefits of the enhanced architecture include the real-time continuous monitoring of engine health, the early diagnosis of fault conditions, and the estimation of unmeasured engine performance parameters. A future vision to advance the enhanced architecture is also presented and discussed

An Optometric Clinical Practicum Examination Model.

ERIC Educational Resources Information Center

Eskridge, Jess B.

1979-01-01

A practical clinical examination model for use by state board examiners in optometry is described including purpose, format, examination design, procedures, evaluation examples and administration. (JMF)

Advantages and Challenges of 10-Gbps Transmission on High-Density Interconnect Boards

NASA Astrophysics Data System (ADS)

Yee, Chang Fei; Jambek, Asral Bahari; Al-Hadi, Azremi Abdullah

2016-06-01

This paper provides a brief introduction to high-density interconnect (HDI) technology and its implementation on printed circuit boards (PCBs). The advantages and challenges of implementing 10-Gbps signal transmission on high-density interconnect boards are discussed in detail. The advantages (e.g., smaller via dimension and via stub removal) and challenges (e.g., crosstalk due to smaller interpair separation) of HDI are studied by analyzing the S-parameter, time-domain reflectometry (TDR), and transmission-line eye diagrams obtained by three-dimensional electromagnetic modeling (3DEM) and two-dimensional electromagnetic modeling (2DEM) using Mentor Graphics HyperLynx and Keysight Advanced Design System (ADS) electronic computer-aided design (ECAD) software. HDI outperforms conventional PCB technology in terms of signal integrity, but proper routing topology should be applied to overcome the challenge posed by crosstalk due to the tight spacing between traces.

WE-G-BRD-06: Volumetric Cine MRI (VC-MRI) Estimated Based On Prior Knowledge for On-Board Target Localization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, W; Yin, F; Cai, J

Purpose: To develop a technique to generate on-board VC-MRI using patient prior 4D-MRI, motion modeling and on-board 2D-cine MRI for real-time 3D target verification of liver and lung radiotherapy. Methods: The end-expiration phase images of a 4D-MRI acquired during patient simulation are used as patient prior images. Principal component analysis (PCA) is used to extract 3 major respiratory deformation patterns from the Deformation Field Maps (DFMs) generated between end-expiration phase and all other phases. On-board 2D-cine MRI images are acquired in the axial view. The on-board VC-MRI at any instant is considered as a deformation of the prior MRI atmore » the end-expiration phase. The DFM is represented as a linear combination of the 3 major deformation patterns. The coefficients of the deformation patterns are solved by matching the corresponding 2D slice of the estimated VC-MRI with the acquired single 2D-cine MRI. The method was evaluated using both XCAT (a computerized patient model) simulation of lung cancer patients and MRI data from a real liver cancer patient. The 3D-MRI at every phase except end-expiration phase was used to simulate the ground-truth on-board VC-MRI at different instances, and the center-tumor slice was selected to simulate the on-board 2D-cine images. Results: Image subtraction of ground truth with estimated on-board VC-MRI shows fewer differences than image subtraction of ground truth with prior image. Excellent agreement between profiles was achieved. The normalized cross correlation coefficients between the estimated and ground-truth in the axial, coronal and sagittal views for each time step were >= 0.982, 0.905, 0.961 for XCAT data and >= 0.998, 0.911, 0.9541 for patient data. For XCAT data, the maximum-Volume-Percent-Difference between ground-truth and estimated tumor volumes was 1.6% and the maximum-Center-of-Mass-Shift was 0.9 mm. Conclusion: Preliminary studies demonstrated the feasibility to estimate real-time VC-MRI for on-board target localization before or during radiotherapy treatments. National Institutes of Health Grant No. R01-CA184173; Varian Medical System.« less

An innovative approach to predict technology evolution for the desoldering of printed circuit boards: A perspective from China and America.

PubMed

Wang, Chen; Zhao, Wu; Wang, Jie; Chen, Ling; Luo, Chun-Jing

2016-06-01

The printed circuit boards basis of electronic equipment have seen a rapid growth in recent years and played a significant role in modern life. Nowadays, the fact that electronic devices upgrade quickly necessitates a proper management of waste printed circuit boards. Non-destructive desoldering of waste printed circuit boards becomes the first and the most crucial step towards recycling electronic components. Owing to the diversity of materials and components, the separation process is difficult, which results in complex and expensive recovery of precious materials and electronic components from waste printed circuit boards. To cope with this problem, we proposed an innovative approach integrating Theory of Inventive Problem Solving (TRIZ) evolution theory and technology maturity mapping system to forecast the evolution trends of desoldering technology of waste printed circuit boards. This approach can be applied to analyse the technology evolution, as well as desoldering technology evolution, then research and development strategy and evolution laws can be recommended. As an example, the maturity of desoldering technology is analysed with a technology maturity mapping system model. What is more, desoldering methods in different stages are analysed and compared. According to the analysis, the technological evolution trends are predicted to be 'the law of energy conductivity' and 'increasing the degree of idealisation'. And the potential technology and evolutionary state of waste printed circuit boards are predicted, offering reference for future waste printed circuit boards recycling. © The Author(s) 2016.

Dust analysis on board the Destiny+ mission to 3200 Phaethon

NASA Astrophysics Data System (ADS)

Krüger, H.; Kobayashi, M.; Arai, T.; Srama, R.; Sarli, B. V.; Kimura, H.; Moragas-Klostermeyer, G.; Soja, R.; Altobelli, N.; Grün, E.

2017-09-01

The Japanese Destiny+ spacecraft will be launched to the active asteroid 3200 Phaethon in 2022. Among the proposed core payload is an in-situ dust instrument based on the Cassini Cosmic Dust Analyzer. We use the ESA Interplanetary Meteoroid Engineering Model (IMEM), to study detection conditions and fluences of interplanetary and interstellar dust with a dust analyzer on board Destiny+.

Variation of the Friction Coefficient for a Cylinder Rolling down an Inclined Board

ERIC Educational Resources Information Center

Yan, Zixiang; Xia, Heming; Lan, Yueheng; Xiao, Jinghua

2018-01-01

A cylinder rolling down an inclined board is a commonly seen and interesting object to study and it is also easy to experiment with and model. Following what has become a popular practice, we use smartphones to measure the angular acceleration of a cylinder rolling down a plane of different inclining angles. The friction force deviates from the…

Material Development to Raise Awareness of Using Smart Boards: An Example Design and Development Research

ERIC Educational Resources Information Center

Günaydin, Serpil; Karamete, Aysen

2016-01-01

This study aims to develop training material that will help raise awareness in prospective teachers regarding the benefits of using smart boards in the classroom. In this study, a Type 2 design and development research method (DDR) was used. The material was developed by applying phases of ADDIE--an instructional systems design model. The…

Optical models of MXT using Zemax

NASA Astrophysics Data System (ADS)

Le Duigou, J. M.; Mercier, K.; Gonzalez, F.; Götz, D.; Meuris, A.

2017-09-01

The Microchannel X-ray Telescope (MXT) is a soft X-rays instrument on board SVOM, a Sino French mission. The launch is planned in 2021 by a LM-2C rocket. The main SVOM general objective is the survey of Gamma Ray Bursts, in coordination with ground telescopes. The other main on board instruments are ECLAIR (gamma, french), GRM (gamma, Chinese) and VT (visible, chinese).

Confirmatory Factor Analysis of U.S. Merit Systems Protection Board's Survey of Sexual Harassment: The Fit of a Three-Factor Model.

ERIC Educational Resources Information Center

Stockdale, Margaret S.; Hope, Kathryn G.

1997-01-01

Factor analysis of data from 1,070 federal employees, 575 undergraduates and 575 graduate students, faculty, and staff uncovered some weaknesses in the Merit Systems Protection Board's sexual harassment survey instrument. This type of survey does not adequately measure sexual coercion or quid pro quo forms of harassment. (SK)

North American oriented strand board markets, arbitrage activity, and market price dynamics: A smooth transition approach

Treesearch

Barry Goodwin; Matthew Holt; Jeffrey P. Prestemon

2011-01-01

Price dynamics for North American oriented strand board markets are examined. The role of transactions costs are explored vis-à-vis the law of one price. Nonlinearities induced by unobservable transactions costs are modeled by estimating time-varying smooth transition autoregressions (TV-STARs). Results indicate that nonlinearity and structural change are important...

Enhancement of the Computer Lumber Grading Program to Support Polygonal Defects

Treesearch

Powsiri Klinkhachorn; R. Kathari; D. Yost; Philip A. Araman

1993-01-01

Computer grading of hardwood lumber promises to avoid regrading of the same lumber because of disagreements between the buyer and the seller. However, the first generation of computer programs for hardwood lumber grading simplify the process by modeling defects on the board as rectangles. This speeds up the grading process buy can inadvertently put a board into a lower...

The art of governance of Dutch hospitals.

PubMed

Hoek, H

1999-01-01

Hospitals in The Netherlands are governed by two boards: The Board of Directors, the legal representative of the hospital, responsible for strategic and operational business activities; and the Supervisory Board, made up of co-opted volunteers and responsible for checking and approving of the major decisions of the Board of Directors. The question which arises is whether the system of governance is able to function appropriately and guarantee enough concern about general health problems, moral and ethical questions and the interest of the patients. This paper investigate the successes and shortfalls of such a system of governance in Dutch hospitals. The results and conclusions determine that although copied from the corporate governance model, it does not function well in an environment where the influence of patients and the inhabitants of the region are of great importance and shareholders do not exist.

Governing boards and profound organizational change in hospitals.

PubMed

Fennell, M L; Alexander, J A

1989-01-01

Over the past decade the importance of governing boards as policy-making setting and oversight units within organizations has increased dramatically. Although this is true for both corporate- and private-sector organizations (Bacon and Brown 1977; Gelman 1988), it is particularly relevant to the health sector. Hospital governing boards, long considered inconsequential in hospital management, have recently become subject to closer scrutiny. The role of governing boards in decisions affecting hospital strategy and hospital performance is once again a topic of some interest in boardrooms and hospital trade journals. Impressive evidence of the renewed interest in governance is provided by the funding of an instructional consortium by the S.K. Kellogg Foundation to help strengthen trusteeship and governing board decision making, and to improve education for health services managers in the area of governance. Members of the consortium include the Hospital Research and Educational Trust, the American Hospital Association, the American College of Healthcare Executives, and the Association for University Programs in Health Administration. Among the activities being undertaken by this consortium is the development of a self-assessment tool/methodology for boards, a bibliography and reference guide on effective governance for practicing trustees, research workshops for faculty in health administration programs, and a teaching guide on governance and trustee leadership. Despite this interest, the question with which we began this article persists. Do governing boards make a difference? In the course of our review of previous work on governance we found that, more often than not, that question has been transformed into: how do boards influence hospital performance? And very often that question has been further narrowed into: which board structure leads to better hospital performance? We have argued for a respecification of the initial question. Rather than pursuing a definition of the maximally performing governing board, we should perhaps shift our focus back to a fuller understanding of board structure and function, and its influence on hospital change. The model developed here combines four essential, and very basic, questions: 1. What are the basic dimensions that underlie structural variation in different types of governing boards? 2. How do these board types influence structural change in hospitals? 3. How is the effect of board influence on change itself likely to change over time as a function of the hospital's general pattern of growth, decline, stability, or instability?(ABSTRACT TRUNCATED AT 400 WORDS)

A Study of the Effects of Congestion Information and a Priority Boarding Pass in a Theme Park with Multi-Agents

NASA Astrophysics Data System (ADS)

Tone, Tetsuya; Kohara, Kazuhiro

We have investigated ways to reduce congestion in a theme park with multi-agents. We constructed a theme park model called Digital Park 1.0 with twenty-three attractions similar in form to Tokyo Disney Sea. We consider not only congestion information (number of vistors standing in line at each attraction) but also the advantage of a priority boarding pass, like Fast Pass which is used at Tokyo Disney Sea. The congestion-information-usage ratio, which reflects the ratio of visitors who behave according to congestion information, was changed from 0% to 100% in both models, with and without priority boarding pass. The “mean stay time of visitors" is a measure of satisfaction. The smaller mean stay time, the larger degree of satisfaction. Here, a short stay time means a short wait time. The resluts of each simulation are averaged over ten trials. The main results are as follows. (1) When congestion-information-usage ratio increased, the mean stay time decreases. When 20% of visitors behaved according to congestion information, the mean stay time was reduced by 30%. (2) A priority boarding pass reduced congestion, and mean stay time was reduced by 15%. (3) When visitors used congestion information and a priority boarding pass, mean stay time was further reduced. When the congestion-information-usage ratio was 20%, mean stay time was reduced by 35%. (4) When congestion-information-usage ratio was over 50%, the congestion reduction effects reached saturation.

Assessing the Effects of the 2003 Resident Duty Hours Reform on Internal Medicine Board Scores

PubMed Central

Romano, Patrick S.; Itani, Kamal M.F.; Rosen, Amy K.; Small, Dylan; Lipner, Rebecca S.; Bosk, Charles L.; Wang, Yanli; Halenar, Michael J.; Korovaichuk, Sophia; Even-Shoshan, Orit; Volpp, Kevin G.

2014-01-01

Purpose To determine whether the 2003 Accreditation Council for Graduate Medical Education (ACGME) duty hours reform affected medical knowledge as reflected by written board scores for internal medicine (IM) residents. Method The authors conducted a retrospective cohort analysis of postgraduate year 1 (PGY-1) Internal Medicine residents who started training before and after the 2003 duty hour reform using a merged data set of American Board of Internal Medicine (ABIM) Board examination and the National Board of Medical Examiners (NMBE) United States Medical Licensing Examination (USMLE) Step 2 Clinical Knowledge test scores. Specifically, using four regression models, the authors compared IM residents beginning PGY-1 training in 2000 and completing training unexposed to the 2003 duty hours reform (PGY-1 2000 cohort, n = 5,475) to PGY-1 cohorts starting in 2001 through 2005 (n = 28,008), all with some exposure to the reform. Results The mean ABIM board score for the unexposed PGY-1 2000 cohort (n = 5,475) was 491, SD = 85. Adjusting for demographics, program, and USMLE Step 2 exam score, the mean differences (95% CI) in ABIM board scores between the PGY-1 2001, 2002, 2003, 2004 and 2005 cohorts minus the PGY-1 2000 cohort were −5.43 (−7.63, −3.23), −3.44 (−5.65, −1.24), 2.58 (0.36, 4.79), 11.10 (8.88, 13.33) and 11.28 (8.98, 13.58) points respectively. None of these differences exceeded one-fifth of an SD in ABIM board scores. Conclusions The duty hours reforms of 2003 did not meaningfully affect medical knowledge as measured by scores on the ABIM board examinations. PMID:24556772

Assessing the effects of the 2003 resident duty hours reform on internal medicine board scores.

PubMed

Silber, Jeffrey H; Romano, Patrick S; Itani, Kamal M F; Rosen, Amy K; Small, Dylan; Lipner, Rebecca S; Bosk, Charles L; Wang, Yanli; Halenar, Michael J; Korovaichuk, Sophia; Even-Shoshan, Orit; Volpp, Kevin G

2014-04-01

To determine whether the 2003 Accreditation Council for Graduate Medical Education (ACGME) duty hours reform affected medical knowledge as reflected by written board scores for internal medicine (IM) residents. The authors conducted a retrospective cohort analysis of postgraduate year 1 (PGY-1) Internal Medicine residents who started training before and after the 2003 duty hour reform using a merged data set of American Board of Internal Medicine (ABIM) Board examination and the National Board of Medical Examiners (NMBE) United States Medical Licensing Examination (USMLE) Step 2 Clinical Knowledge test scores. Specifically, using four regression models, the authors compared IM residents beginning PGY-1 training in 2000 and completing training unexposed to the 2003 duty hours reform (PGY-1 2000 cohort, n = 5,475) to PGY-1 cohorts starting in 2001 through 2005 (n = 28,008), all with some exposure to the reform. The mean ABIM board score for the unexposed PGY-1 2000 cohort (n = 5,475) was 491, SD = 85. Adjusting for demographics, program, and USMLE Step 2 exam score, the mean differences (95% CI) in ABIM board scores between the PGY-1 2001, 2002, 2003, 2004 and 2005 cohorts minus the PGY-1 2000 cohort were -5.43 (-7.63, -3.23), -3.44 (-5.65, -1.24), 2.58 (0.36, 4.79), 11.10 (8.88, 13.33) and 11.28 (8.98, 13.58) points respectively. None of these differences exceeded one-fifth of an SD in ABIM board scores. The duty hours reforms of 2003 did not meaningfully affect medical knowledge as measured by scores on the ABIM board examinations.

Test-bench system for a borehole azimuthal acoustic reflection imaging logging tool

NASA Astrophysics Data System (ADS)

Liu, Xianping; Ju, Xiaodong; Qiao, Wenxiao; Lu, Junqiang; Men, Baiyong; Liu, Dong

2016-06-01

The borehole azimuthal acoustic reflection imaging logging tool (BAAR) is a new generation of imaging logging tool, which is able to investigate stratums in a relatively larger range of space around the borehole. The BAAR is designed based on the idea of modularization with a very complex structure, so it has become urgent for us to develop a dedicated test-bench system to debug each module of the BAAR. With the help of a test-bench system introduced in this paper, test and calibration of BAAR can be easily achieved. The test-bench system is designed based on the client/server model. The hardware system mainly consists of a host computer, an embedded controlling board, a bus interface board, a data acquisition board and a telemetry communication board. The host computer serves as the human machine interface and processes the uploaded data. The software running on the host computer is designed based on VC++. The embedded controlling board uses Advanced Reduced Instruction Set Machines 7 (ARM7) as the micro controller and communicates with the host computer via Ethernet. The software for the embedded controlling board is developed based on the operating system uClinux. The bus interface board, data acquisition board and telemetry communication board are designed based on a field programmable gate array (FPGA) and provide test interfaces for the logging tool. To examine the feasibility of the test-bench system, it was set up to perform a test on BAAR. By analyzing the test results, an unqualified channel of the electronic receiving cabin was discovered. It is suggested that the test-bench system can be used to quickly determine the working condition of sub modules of BAAR and it is of great significance in improving production efficiency and accelerating industrial production of the logging tool.

Numerical-experimental investigation of resonance characteristics of a sounding board

NASA Astrophysics Data System (ADS)

Shlychkov, S. V.

2007-05-01

The paper presents results of numerical and experimental investigations into the vibrations of thin-walled structures, considering such their features as the complexity of geometry, the laminated structure of walls, the anisotropy of materials, the presence of stiffeners, and the initial stresses. The object of the study is the sounding board of an acoustic guitar, the main structural material of which is a three-layer birch veneer. Based on the finite-element method, a corresponding calculation model is created, and the steady-state regimes of forced vibrations of the sounding board are investigated. A good correspondence between calculation results and experimental data is found to exist.

Radiated Emissions from a Remote-Controlled Airplane-Measured in a Reverberation Chamber

NASA Technical Reports Server (NTRS)

Ely, Jay J.; Koppen, Sandra V.; Nguyen, Truong X.; Dudley, Kenneth L.; Szatkowski, George N.; Quach, Cuong C.; Vazquez, Sixto L.; Mielnik, John J.; Hogge, Edward F.; Hill, Boyd L.;

NASA Standard for Models and Simulations (M and S): Development Process and Rationale

NASA Technical Reports Server (NTRS)

Zang, Thomas A.; Blattnig, Steve R.; Green, Lawrence L.; Hemsch, Michael J.; Luckring, James M.; Morison, Joseph H.; Tripathi, Ram K.

2009-01-01

After the Columbia Accident Investigation Board (CAIB) report. the NASA Administrator at that time chartered an executive team (known as the Diaz Team) to identify the CAIB report elements with Agency-wide applicability, and to develop corrective measures to address each element. This report documents the chronological development and release of an Agency-wide Standard for Models and Simulations (M&S) (NASA Standard 7009) in response to Action #4 from the report, "A Renewed Commitment to Excellence: An Assessment of the NASA Agency-wide Applicability of the Columbia Accident Investigation Board Report, January 30, 2004".

Security from Within: Independent Review of the Washington Navy Yard Shooting

DTIC Science & Technology

2013-11-01

2012 report, the Defense Science Board (DSB) Task Force reviewing the Fort Hood shooting recommended “a threat management approach employing...mental health research findings into clinical practice. 103 The field of implementation science offers several models for establishing and supporting...December 29, 2008, http://www.dhs.gov/xlibrary/assets/privacy/privacy_policyguide_2008-01.pdf. 47 Defense Science Board. “Task Force Report

Alaskan Superintendent Turnover: Is There a Correlation between Anticipated Turnover and the Organizational Culture of School Boards in the State of Alaska

ERIC Educational Resources Information Center

Herbert, David M. Q.

2012-01-01

The purpose of this study is to determine if a particular type of school board culture is predictive of Alaskan public school superintendents' intention to leave their positions. Cameron and Quinn's four types of organizational culture--hierarchy, market, clan, and adhocracy--serve as the model for the study, which surveyed Alaska's public school…

Information technology and the board of directors.

PubMed

Nolan, Richard; McFarlan, F Warren

2005-10-01

Ever since the Y2K scare, boards have grown increasingly nervous about corporate dependence on information technology. Since then, computer crashes, denial of service attacks, competitive pressures, and the need to automate compliance with government regulations have heightened board sensitivity to IT risk. Unfortunately, most boards remain largely in the dark when it comes to IT spending and strategy, despite the fact that corporate information assets can account for more than 50% of capital spending. A lack of board oversight for IT activities is dangerous, the authors say. It puts firms at risk in the same way that failing to audit their books would. Companies that have established board-level IT governance committees are better able to control IT project costs and carve out competitive advantage. But there is no one-size-fits-all model for board supervision of a company's IT operations. The correct approach depends on what strategic "mode" a company is in whether its operations are extremely dependent on IT or not, and whether or not it relies heavily on keeping up with the latest technologies. This article spells out the conditions under which boards need to change their level of involvement in IT decisions, explaining how members can recognize their firms' IT risks and decide whether they should pursue more aggressive IT governance. The authors delineate what an IT governance committee should look like in terms of charter, membership, duties, and overall agenda. They also offer recommendations for developing IT policies that take into account an organization's operational and strategic needs and suggest what to do when those needs change. Given the dizzying pace of change in the world of IT, boards can't afford to ignore the state of their IT systems and capabilities. Appropriate board governance can go a long way toward helping a company avoid unnecessary risk and improve its competitive position.

Development of Labview based data acquisition and multichannel analyzer software for radioactive particle tracking system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rahman, Nur Aira Abd, E-mail: nur-aira@nuclearmalaysia.gov.my; Yussup, Nolida; Ibrahim, Maslina Bt. Mohd

2015-04-29

A DAQ (data acquisition) software called RPTv2.0 has been developed for Radioactive Particle Tracking System in Malaysian Nuclear Agency. RPTv2.0 that features scanning control GUI, data acquisition from 12-channel counter via RS-232 interface, and multichannel analyzer (MCA). This software is fully developed on National Instruments Labview 8.6 platform. Ludlum Model 4612 Counter is used to count the signals from the scintillation detectors while a host computer is used to send control parameters, acquire and display data, and compute results. Each detector channel consists of independent high voltage control, threshold or sensitivity value and window settings. The counter is configured withmore » a host board and twelve slave boards. The host board collects the counts from each slave board and communicates with the computer via RS-232 data interface.« less

FIRE TEST AND HEAT ANALYSIS FOR STEEL-CONCRETE COMPOSITE MEMBER WITH FIREPROOF BOARD

NASA Astrophysics Data System (ADS)

Nakai, Akihiro; Kiyomiya, Osamu

Composite members made of steel and concrete have been widely adopted for undersea tunnels. Since steel plates are exposed to the internal side of the tunnel, vehicle fire countermeasures are required. First, the RABT heating test for the composite members without the fireproof board was executed, and the damage and the deterioration of the internal concrete were examined. Next, the transmission mechanism of heat in the air layer between the fireproof board and the steel was aloso examined by the element test to mesure the heat flow by the radiation, convection, and the conduction. Furthermore, the RABT heating test with fireproof board was executed, and the internal temperature was measured and the effect of the air layer was confirmed. Finally, validity of the proposed analytical model was confirmed by comparing the heat analysis results with the heat tests results.

8. VIEW, LOOKING NORTH, OF INTERLOCKING MACHINE WITH ORIGINAL MODEL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. VIEW, LOOKING NORTH, OF INTERLOCKING MACHINE WITH ORIGINAL MODEL BOARD IN CENTER AND MODEL SEMAPHORE SIGNALS (AT TOP OF PHOTOGRAPH), THIRD FLOOR - South Station Tower No. 1 & Interlocking System, Dewey Square, Boston, Suffolk County, MA

TEGA Whirligig Model

NASA Image and Video Library

2008-06-09

This is a photo of an engineering model of the Thermal and Evolved-Gas Analyzer TEGA instrument on board NASA Phoenix Mars Lander. This view shows a TEGA oven-loading mechanism beneath the input screen.

Does Gender Matter? Female Representation on Corporate Boards and Firm Financial Performance--A Meta-Analysis.

PubMed

Pletzer, Jan Luca; Nikolova, Romina; Kedzior, Karina Karolina; Voelpel, Sven Constantin

2015-01-01

In recent years, there has been an ongoing, worldwide debate about the representation of females in companies. Our study aimed to meta-analytically investigate the controversial relationship between female representation on corporate boards and firm financial performance. Following a systematic literature search, data from 20 studies on 3097 companies published in peer-reviewed academic journals were included in the meta-analysis. On average, the boards consisted of eight members and female participation was low (mean 14%) in all studies. Half of the 20 studies were based on data from developing countries and 62% from higher income countries. According to the random-effects model, the overall mean weighted correlation between percentage of females on corporate boards and firm performance was small and non-significant (r = .01, 95% confidence interval: -.04, .07). Similar small effect sizes were observed when comparing studies based on developing vs. developed countries and higher vs. lower income countries. The mean board size was not related to the effect sizes in studies. These results indicate that the mere representation of females on corporate boards is not related to firm financial performance if other factors are not considered. We conclude our study with a discussion of its implications and limitations.

Does Gender Matter? Female Representation on Corporate Boards and Firm Financial Performance - A Meta-Analysis

PubMed Central

Pletzer, Jan Luca; Nikolova, Romina; Kedzior, Karina Karolina; Voelpel, Sven Constantin

2015-01-01

In recent years, there has been an ongoing, worldwide debate about the representation of females in companies. Our study aimed to meta-analytically investigate the controversial relationship between female representation on corporate boards and firm financial performance. Following a systematic literature search, data from 20 studies on 3097 companies published in peer-reviewed academic journals were included in the meta-analysis. On average, the boards consisted of eight members and female participation was low (mean 14%) in all studies. Half of the 20 studies were based on data from developing countries and 62% from higher income countries. According to the random-effects model, the overall mean weighted correlation between percentage of females on corporate boards and firm performance was small and non-significant (r = .01, 95% confidence interval: -.04, .07). Similar small effect sizes were observed when comparing studies based on developing vs. developed countries and higher vs. lower income countries. The mean board size was not related to the effect sizes in studies. These results indicate that the mere representation of females on corporate boards is not related to firm financial performance if other factors are not considered. We conclude our study with a discussion of its implications and limitations. PMID:26086454

Modeling contamination migration on the Chandra X-Ray Observatory

NASA Technical Reports Server (NTRS)

O'Dell, Stephen L.; Swartz, Douglas A.; Anderson, Scot K.; Chen, Kenny C.; Giordano, Rino J.; Knollenberg, Perry J.; Morris, Peter A.; Plucinsky, Paul P.; Tice, Neil W.; Tran, Hien

2005-01-01

During its first 5 years of operation, the cold (-60 C) optical blocking filter of the Advanced CCD Imaging Spectrometer (ACIS), on board the Chandra X-ray Observatory, has accumulated a contaminating layer that attenuates the low-energy x rays. To assist in assessing the likelihood of successfully baking off the contaminant, members of the Chandra Team developed contamination-migration simulation software. The simulation follows deposition onto and (temperature-dependent) vaporization from surfaces comprising a geometrical model of the Observatory. A separate thermal analysis, augmented by on-board temperature monitoring, provides temperatures for each surface of the same geometrical model. This paper describes the physical basis for the simulations, the methodologies, and the predicted migration of the contaminant for various bake-out scenarios and assumptions.

Semantic modeling and structural synthesis of onboard electronics protection means as open information system

NASA Astrophysics Data System (ADS)

Zhevnerchuk, D. V.; Surkova, A. S.; Lomakina, L. S.; Golubev, A. S.

2018-05-01

The article describes the component representation approach and semantic models of on-board electronics protection from ionizing radiation of various nature. Semantic models are constructed, the feature of which is the representation of electronic elements, protection modules, sources of impact in the form of blocks with interfaces. The rules of logical inference and algorithms for synthesizing the object properties of the semantic network, imitating the interface between the components of the protection system and the sources of radiation, are developed. The results of the algorithm are considered using the example of radiation-resistant microcircuits 1645RU5U, 1645RT2U and the calculation and experimental method for estimating the durability of on-board electronics.

The Effect of the Use of Smart Board in the Biology Class on the Academic Achievement of Student

ERIC Educational Resources Information Center

Onder, Recep; Aydin, Halil

2016-01-01

The objective of this study is to reveal the effect of the use of smart board in the biology class at the tenth grade of the secondary education on the academic achievements of students. The study used the quasi-experimental model with pre-test and post-test control groups and semi-structured interviews were made with the students. The study group…

Modeling and Simulation Reliable Spacecraft On-Board Computing

NASA Technical Reports Server (NTRS)

Park, Nohpill

1999-01-01

The proposed project will investigate modeling and simulation-driven testing and fault tolerance schemes for Spacecraft On-Board Computing, thereby achieving reliable spacecraft telecommunication. A spacecraft communication system has inherent capabilities of providing multipoint and broadcast transmission, connectivity between any two distant nodes within a wide-area coverage, quick network configuration /reconfiguration, rapid allocation of space segment capacity, and distance-insensitive cost. To realize the capabilities above mentioned, both the size and cost of the ground-station terminals have to be reduced by using reliable, high-throughput, fast and cost-effective on-board computing system which has been known to be a critical contributor to the overall performance of space mission deployment. Controlled vulnerability of mission data (measured in sensitivity), improved performance (measured in throughput and delay) and fault tolerance (measured in reliability) are some of the most important features of these systems. The system should be thoroughly tested and diagnosed before employing a fault tolerance into the system. Testing and fault tolerance strategies should be driven by accurate performance models (i.e. throughput, delay, reliability and sensitivity) to find an optimal solution in terms of reliability and cost. The modeling and simulation tools will be integrated with a system architecture module, a testing module and a module for fault tolerance all of which interacting through a centered graphical user interface.

Multi-level Simulation of a Real Time Vibration Monitoring System Component

NASA Technical Reports Server (NTRS)

Robertson, Bryan A.; Wilkerson, Delisa

2005-01-01

This paper describes the development of a custom built Digital Signal Processing (DSP) printed circuit board designed to implement the Advanced Real Time Vibration Monitoring Subsystem proposed by Marshall Space Flight Center (MSFC) Transportation Directorate in 2000 for the Space Shuttle Main Engine Advanced Health Management System (AHMS). This Real Time Vibration Monitoring System (RTVMS) is being developed for ground use as part of the AHMS Health Management Computer-Integrated Rack Assembly (HMC-IRA). The HMC-IRA RTVMS design contains five DSPs which are highly interconnected through individual communication ports, shared memory, and a unique communication router that allows all the DSPs to receive digitized data fiom two multi-channel analog boards simultaneously. This paper will briefly cover the overall board design but will focus primarily on the state-of-the-art simulation environment within which this board was developed. This 16-layer board with over 1800 components and an additional mezzanine card has been an extremely challenging design. Utilization of a Mentor Graphics simulation environment provided the unique board and system level simulation capability to ascertain any timing or functional concerns before production. By combining VHDL, Synopsys Software and Hardware Models, and the Mentor Design Capture Environment, multiple simulations were developed to verify the RTVMS design. This multi-level simulation allowed the designers to achieve complete operability without error the first time the RTVMS printed circuit board was powered. The HMC-IRA design has completed all engineering and deliverable unit testing. P

Multi-level Simulation of a Real Time Vibration Monitoring System Component

NASA Technical Reports Server (NTRS)

Roberston, Bryan; Wilkerson, DeLisa

2004-01-01

This paper describes the development of a custom built Digital Signal Processing (DSP) printed circuit board designed to implement the Advanced Real Time Vibration Monitoring Subsystem proposed by MSFC Transportation Directorate in 2000 for the Space Shuttle Main Engine Advanced Health Management System (AHMS). This Real Time Vibration Monitoring System (RTVMS) is being developed for ground use as part of the AHMS Health Management Computer-Integrated Rack Assembly (HMC-IRA). The HMC-IRA RTVMS design contains five DSPs which are highly interconnected through individual communication ports, shared memory, and a unique communication router that allows all the DSPs to receive digitized data from two multi-channel analog boards simultaneously. This paper will briefly cover the overall board design but will focus primarily on the state-of-the-art simulation environment within which this board was developed. This 16-layer board with over 1800 components and an additional mezzanine card has been an extremely challenging design. Utilization of a Mentor Graphics simulation environment provided the unique board and system level simulation capability to ascertain any timing or functional concerns before production. By combining VHDL, Synopsys Software and Hardware Models, and the Mentor Design Capture Environment, multiple simulations were developed to verify the RTVMS design. This multi-level simulation allowed the designers to achieve complete operability without error the first time the RTVMS printed circuit board was powered. The HMCIRA design has completed all engineering unit testing and the deliverable unit is currently under development.

Modelling University Governance

ERIC Educational Resources Information Center

Trakman, Leon

2008-01-01

Twentieth century governance models used in public universities are subject to increasing doubt across the English-speaking world. Governments question if public universities are being efficiently governed; if their boards of trustees are adequately fulfilling their trust obligations towards multiple stakeholders; and if collegial models of…

The effects of corporate restructuring on hospital policymaking.

PubMed Central

Alexander, J A; Morlock, L L; Gifford, B D

1988-01-01

Hospital corporate restructuring is the segmentation of assets or functions of the hospital into separate corporations. While these functions are almost always legally separated from the hospital, their impact on hospital policymaking may be far more direct. This study examines the effects of corporate restructuring by community hospitals on the structure, composition, and activity of hospital governing boards. In general, we expect that the policymaking function of the hospital will change to adapt to the multicorporate structure implemented under corporate restructuring, as well as the overlapping boards and diversified business responsibilities of the new corporate entity. Specifically, we hypothesize that the hospital board under corporate restructuring will conform more to the "corporate" model found in the business/industrial sector and less to the "philanthropic" model common to most community hospitals to date. Analysis of survey data from 1,037 hospitals undergoing corporate restructuring from 1979-1985 and a comparison group of 1,883 noncorporately restructured hospitals suggests general support for this hypothesis. Implications for health care governance and research are discussed. PMID:3384671

Diffuse characteristics study of laser target board using Monte Carlo simulation

NASA Astrophysics Data System (ADS)

Yang, Pengling; Wu, Yong; Wang, Zhenbao; Tao, Mengmeng; Wu, Junjie; Wang, Ping; Yan, Yan; Zhang, Lei; Feng, Gang; Zhu, Jinghui; Feng, Guobin

2013-05-01

In this paper, Torrance-Sparrow and Oren-Nayar model is adopt to study diffuse characteristics of laser target board. The model which based on geometric optics, assumes that rough surfaces are made up of a series of symmetric V-groove cavities with different slopes at microscopic level. The distribution of the slopes of the V-grooves are modeled as beckman distribution function, and every microfacet of the V-groove cavity is assumed to behave like a perfect mirror, which means the reflected ray follows Fresnel law at the microfacet. The masking and shadowing effects of rough surface are also taken into account through geometric attenuation factor. Monte Carlo method is used to simulate the diffuse reflectance distribution of the laser target board with different materials and processing technology, and all the calculated results are verified by experiment. It is shown that the profile of bidirectional reflectance distribution curve is lobe-shaped with the maximum lies along the mirror reflection direction. The width of the profile is narrower for a lower roughness value, and broader for a higher roughness value. The refractive index of target material will also influence the intensity and distribution of diffuse reflectance of laser target surface.

The association of hospital governance with innovation in Taiwan.

PubMed

Yang, Chen-Wei; Yan, Yu-Hua; Fang, Shih-Chieh; Inamdar, Syeda Noorein; Lin, Hsien-Cheng

2018-01-01

Hospitals in Taiwan are facing major changes and innovation is increasingly becoming a critical factor for remaining competitive. One determinant that can have a significant impact on innovation is hospital governance. However, there is limited prior research on the relationship between hospital governance and innovation. The purpose of this study is to propose a conceptual framework to hypothesize the relationship between governance mechanisms and innovation and to empirically test the hypotheses in hospital organizations. We examine the relationship between governance mechanisms and innovation using data on 102 hospitals in Taiwan from the Taiwan Joint Commission on Hospital Accreditation and Quality Improvement. We model governance mechanisms using board structure, information transparency and strategic decision-making processes. For our modeling and data analysis we use measurement and structural models. We find that in hospital governance, information transparency and strategic decision making did impact innovation. However, governance structure did not. To facilitate innovation, hospital boards can increase information transparency and improve the decision-making process when considering strategic investments in innovative initiatives. To remain competitive, hospital boards need to develop and monitor indices that measure hospital innovation to ensure ongoing progress. Copyright © 2017 John Wiley & Sons, Ltd.

Evaluation of Electrochemical Migration on Printed Circuit Boards with Lead-Free and Tin-Lead Solder

NASA Astrophysics Data System (ADS)

He, Xiaofei; Azarian, Michael H.; Pecht, Michael G.

2011-09-01

To evaluate the current leakage and electrochemical migration behavior on printed circuit boards with eutectic tin-lead and lead-free solder, IPC B-24 comb structures were exposed to 65°C and 88% relative humidity conditions under direct-current (DC) bias for over 1500 h. These boards were processed with either Sn-3.0Ag-0.5Cu solder or Sn-37Pb solder. In addition to solder alloy, board finish (organic solderability preservative versus lead-free hot air solder leveling), spacing (25 mil versus 12.5 mil), and voltage (40 V versus 5 V bias) were also assessed by using in situ measurements of surface insulation resistance (SIR) and energy-dispersive spectroscopy after testing. It was shown that an initial increase of SIR was caused by consumption of electroactive species on the surface, intermittent drops of SIR were caused by dendritic growth, and a long-term SIR decline was caused by electrodeposition of a metallic layer. The prolonged SIR decline of Sn-3.0Ag-0.5Cu boards was simulated by three-dimensional (3D) progressive and instantaneous nucleation models, whose predictions were compared with experimental data. Sn-37Pb boards exhibited comigration of Sn, Pb, and Cu, while Sn-3.0Ag-0.5Cu boards incurred comigration of Sn, Ag, and Cu. Among the migrated species, Sn always dominated and was observed as either a layer or in polyhedral deposits, Pb was the most common element found in the dendrites, Cu was a minor constituent, and Ag migrated only occasionally. Compared with solder alloy, board finishes played a secondary role in affecting SIR due to their complexation with or dissolution into the solder. The competing effect between electric field and spacing was also investigated.

Wind shear measuring on board an airliner

NASA Technical Reports Server (NTRS)

Krauspe, P.

1984-01-01

A measurement technique which continuously determines the wind vector on board an airliner during takeoff and landing is introduced. Its implementation is intended to deliver sufficient statistical background concerning low frequency wind changes in the atmospheric boundary layer and extended knowledge about deterministic wind shear modeling. The wind measurement scheme is described and the adaptation of apparatus onboard an A300 airbus is shown. Preliminary measurements made during level flight demonstrate the validity of the method.

A Model Performance

ERIC Educational Resources Information Center

Thornton, Bradley D.; Smalley, Robert A.

2008-01-01

Building information modeling (BIM) uses three-dimensional modeling concepts, information technology and interoperable software to design, construct and operate a facility. However, BIM can be more than a tool for virtual modeling--it can provide schools with a 3-D walkthrough of a project while it still is on the electronic drawing board. BIM can…

Modeling to predict growth/no growth boundaries and kinetic behavior of Salmonella on cutting board surfaces.

PubMed

Yoon, Hyunjoo; Lee, Joo-Yeon; Suk, Hee-Jin; Lee, Sunah; Lee, Heeyoung; Lee, Soomin; Yoon, Yohan

2012-12-01

This study developed models to predict the growth probabilities and kinetic behavior of Salmonella enterica strains on cutting boards. Polyethylene coupons (3 by 5 cm) were rubbed with pork belly, and pork purge was then sprayed on the coupon surface, followed by inoculation of a five-strain Salmonella mixture onto the surface of the coupons. These coupons were stored at 13 to 35°C for 12 h, and total bacterial and Salmonella cell counts were enumerated on tryptic soy agar and xylose lysine deoxycholate (XLD) agar, respectively, every 2 h, which produced 56 combinations. The combinations that had growth of ≥0.5 log CFU/cm(2) of Salmonella bacteria recovered on XLD agar were given the value 1 (growth), and the combinations that had growth of <0.5 log CFU/cm(2) were assigned the value 0 (no growth). These growth response data from XLD agar were analyzed by logistic regression for producing growth/no growth interfaces of Salmonella bacteria. In addition, a linear model was fitted to the Salmonella cell counts to calculate the growth rate (log CFU per square centimeter per hour) and initial cell count (log CFU per square centimeter), following secondary modeling with the square root model. All of the models developed were validated with observed data, which were not used for model development. Growth of total bacteria and Salmonella cells was observed at 28, 30, 33, and 35°C, but there was no growth detected below 20°C within the time frame investigated. Moreover, various indices indicated that the performance of the developed models was acceptable. The results suggest that the models developed in this study may be useful in predicting the growth/no growth interface and kinetic behavior of Salmonella bacteria on polyethylene cutting boards.

Time needed to board an airplane: a power law and the structure behind it.

PubMed

Frette, Vidar; Hemmer, Per C

2012-01-01

A simple model for the boarding of an airplane is studied. Passengers have reserved seats but enter the airplane in arbitrary order. Queues are formed along the aisle, as some passengers have to wait to reach the seats for which they have reservation. We label a passenger by the number of his or her reserved seat. In most cases the boarding process is much slower than for the optimal situation, where passenger and seat orders are identical. We study this dynamical system by calculating the average boarding time when all permutations of N passengers are given equal weight. To first order, the boarding time for a given permutation (ordering) of the passengers is given by the number s of sequences of monotonically increasing values in the permutation. We show that the distribution of s is symmetric on [1,N], which leads to an average boarding time (N+1)/2. We have found an exact expression for s and have shown that the full distribution of s approaches a normal distribution as N increases. However, there are significant corrections to the first-order results, due to certain correlations between passenger ordering and the substrate (seat ordering). This occurs for some cases in which the sequence of the seats is partially mirrored in the passenger ordering. These cases with correlations have a boarding time that is lower than predicted by the first-order results. The large number of cases with reduced boarding times have been classified. We also give some indicative results on the geometry of the correlations, with sorting into geometry groups. With increasing N, both the number of correlation types and the number of cases belonging to each type increase rapidly. Using enumeration we find that as a result of these correlations the average boarding time behaves like N(α), with α≃0.69, as compared with α=1.0 for the first-order approximation. © 2012 American Physical Society

Insight into Central Asian flora from the Cenozoic Tianshan montane origin and radiation of Lagochilus (Lamiaceae).

PubMed

Zhang, Ming-Li; Zeng, Xiao-Qing; Sanderson, Stewart C; Byalt, Vyacheslav V; Sukhorukov, Alexander P

2017-01-01

The Tianshan Mountains play a significant role in the Central Asian flora and vegetation. Lagochilus has a distribution concentration in Tianshan Mountains and Central Asia. To investigate generic spatiotemporal evolution, we sampled most Lagochilus species and sequenced six cpDNA locations (rps16, psbA-trnH, matK, trnL-trnF, psbB-psbH, psbK-psbI). We employed BEAST Bayesian inference for dating, and S-DIVA, DEC, and BBM for ancestral area/biome reconstruction. Our results clearly show that the Tianshan Mountains, especially the western Ili-Kirghizia Tianshan, as well as Sunggar and Kaschgar, was the ancestral area. Ancestral biome was mainly in the montane steppe zone of valley and slope at altitudes of 1700-2700 m, and the montane desert zone of foothill and front-hill at 1000-1700 m. Here two sections Inermes and Lagochilus of the genus displayed "uphill" and "downhill" speciation process during middle and later Miocene. The origin and diversification of the genus were explained as coupled with the rapid uplift of the Tianshan Mountains starting in late Oligocene and early Miocene ca. 23.66~19.33 Ma, as well as with uplift of the Qinghai-Tibetan Plateau (QTP) and Central Asian aridification.

Digestive enzyme activities of turbot (Scophthalmus maximus L.) during early developmental stages under culture condition.

PubMed

Tong, X H; Xu, S H; Liu, Q H; Li, J; Xiao, Z Z; Ma, D Y

2012-06-01

Digestive enzyme activities were analysed in turbot (Scophthalmus maximus) from hatching until 60 days after hatching (DAH). Trypsin sharply increased to the climax at 17 DAH and decreased until 31 DAH followed by a stable level thereafter. Amylase was determined at 4 DAH, reached the maximum value at 19 DAH and declined sharply to 39 DAH and remained at a low level thereafter, suggesting the carbohydrate component should remain at a low level in formulated diets. Pepsin was detected at 9 DAH and increased to 34 DAH and then remained at a stable level. The above results revealed pancreatic enzymes are no longer main enzymes for food digestion after the formation of functional stomach. Leucine-alanine peptidase (Leu-ala) and alkaline phosphatase (AP) and leucine aminopeptidase N (LAP) were found in newly hatched larvae. Both AP and LAP activities markedly increased to 23 DAH, decreased abruptly to 50 DAH and increased gradually to 60 DAH. Leu-ala reached the plateau from 23 to 39 DAH, followed by a decline to 46 DAH and an increase until 60 DAH. The brush border membrane (BBM)-bound enzyme activities increased from 30% at 31 DAH to 81% at 38 DAH of the total activities, indicating the maturation of intestinal tract.

Spatiotemporal evolution of Calophaca (fabaceae) reveals multiple dispersals in central Asian mountains.

PubMed

Zhang, Ming-Li; Wen, Zhi-Bin; Fritsch, Peter W; Sanderson, Stewart C

2015-01-01

The Central Asian flora plays a significant role in Eurasia and the Northern Hemisphere. Calophaca, a member of this flora, includes eight currently recognized species, and is centered in Central Asia, with some taxa extending into adjacent areas. A phylogenetic analysis of the genus utilizing nuclear ribosomal ITS and plastid trnS-trnG and rbcL sequences was carried out in order to confirm its taxonomic status and reconstruct its evolutionary history. We employed BEAST Bayesian inference for dating, and S-DIVA and BBM for ancestral area reconstruction, to study its spatiotemporal evolution. Our results show that Calophacais monophyletic and nested within Caragana. The divergence time of Calophaca is estimated at ca. 8.0 Ma, most likely driven by global cooling and aridification, influenced by rapid uplift of the Qinghai Tibet Plateau margins. According to ancestral area reconstructions, the genus most likely originated in the Pamir Mountains, a global biodiversity hotspot and hypothesized Tertiary refugium of many Central Asian plant lineages. Dispersals from this location are inferred to the western Tianshan Mountains, then northward to the Tarbagatai Range, eastward to East Asia, and westward to the Caucasus, Russia, and Europe. The spatiotemporal evolution of Calophaca provides a case contributing to an understanding of the flora and biodiversity of the Central Asian mountains and adjacent regions.

Effect of Light Intensity for Optimum Biomass and Lipid Production from Scenedesmus dimorphus (Turpin) Kützing

NASA Astrophysics Data System (ADS)

Kurniawati, F. N.; Mahajoeno, E.; Sunarto; Sari, S. L. A.

2017-07-01

One source of alternative energy substitute for petroleum raw materials is renewable vegetable oils known as biodiesel. Biodiesel can be produced from microalgae, since it was more efficient and environmentally friendly. Scenedesmus dimorphus (Turpin) Kützing was developed as a source of biodiesel since it had potential of high lipid production. The aims of this research were to know the rate of growth of Scenedesmus dimorphus in different lighting and the optimimum light intensity for biomass and lipid production. This research used a completely randomized design consisting of 3 treatments with 3 replications. Treatments in this research were the light intensity, i.e. 7,500, 10,000, and 12,500 lux. Scenedesmus dimorphus was grew in Bold’s Basal Medium (BBM). Parameters observed in this research were the cell number, biomass and lipid production of S. dimorphus. Data were analyzed by ANOVA followed by DMRT 5%. The results showed that the optimum growth rate of S. dimorphus was in the intensity of 12,500 lux that was 100.80 x 106 cells.ml-1. The optimum production of biomass and lipids was in treatment 12,500 lux i.e; 1.1407 g.L-1 and 0.2520 g.L-1 (22.28% dry weight).

Effect of trichloroethylene (TCE) toxicity on the enzymes of carbohydrate metabolism, brush border membrane and oxidative stress in kidney and other rat tissues.

PubMed

Khan, Sheeba; Priyamvada, Shubha; Khan, Sara A; Khan, Wasim; Farooq, Neelam; Khan, Farah; Yusufi, A N K

2009-07-01

Trichloroethylene (TCE), an industrial solvent, is a major environmental contaminant. Histopathological examinations revealed that TCE caused liver and kidney toxicity and carcinogenicity. However, biochemical mechanism and tissue response to toxic insult are not completely elucidated. We hypothesized that TCE induces oxidative stress to various rat tissues and alters their metabolic functions. Male Wistar rats were given TCE (1000 mg/kg/day) in corn oil orally for 25 d. Blood and tissues were collected and analyzed for various biochemical and enzymatic parameters. TCE administration increased blood urea nitrogen, serum creatinine, cholesterol and alkaline phosphatase but decreased serum glucose, inorganic phosphate and phospholipids indicating kidney and liver toxicity. Activity of hexokinase, lactate dehydrogenase increased in the intestine and liver whereas decreased in renal tissues. Malate dehydrogenase and glucose-6-phosphatase and fructose-1, 6-bisphosphatase decreased in all tissues whereas increased in medulla. Glucose-6-phosphate dehydrogenase increased but NADP-malic enzyme decreased in all tissues except in medulla. The activity of BBM enzymes decreased but renal Na/Pi transport increased. Superoxide dismutase and catalase activities variably declined whereas lipid peroxidation significantly enhanced in all tissues. The present results indicate that TCE caused severe damage to kidney, intestine, liver and brain; altered carbohydrate metabolism and suppressed antioxidant defense system.

The role of chromatin modifications in somatic embryogenesis in plants

PubMed Central

De-la-Peña, Clelia; Nic-Can, Geovanny I.; Galaz-Ávalos, Rosa M.; Avilez-Montalvo, Randy; Loyola-Vargas, Víctor M.

2015-01-01

Somatic embryogenesis (SE) is a powerful tool for plant genetic improvement when used in combination with traditional agricultural techniques, and it is also an important technique to understand the different processes that occur during the development of plant embryogenesis. SE onset depends on a complex network of interactions among plant growth regulators, mainly auxins and cytokinins, during the proembryogenic early stages, and ethylene and gibberellic and abscisic acids later in the development of the somatic embryos. These growth regulators control spatial and temporal regulation of multiple genes in order to initiate change in the genetic program of somatic cells, as well as moderating the transition between embryo developmental stages. In recent years, epigenetic mechanisms have emerged as critical factors during SE. Some early reports indicate that auxins and in vitro conditions modify the levels of DNA methylation in embryogenic cells. The changes in DNA methylation patterns are associated with the regulation of several genes involved in SE, such as WUS, BBM1, LEC, and several others. In this review, we highlight the more recent discoveries in the understanding of the role of epigenetic regulation of SE. In addition, we include a survey of different approaches to the study of SE, and new opportunities to focus SE studies. PMID:26347757

Effect of indigo dye effluent on the growth, biomass production and phenotypic plasticity of Scenedesmus quadricauda (Chlorococcales).

PubMed

Chia, Mathias A; Musa, Rilwan I

2014-03-01

The effect of indigo dye effluent on the freshwater microalga Scenedesmus quadricauda ABU12 was investigated under controlled laboratory conditions. The microalga was exposed to different concentrations of the effluent obtained by diluting the dye effluent from 100 to 175 times in bold basal medium (BBM). The growth rate of the microalga decreased as indigo dye effluent concentration increased (p <0.05). The EC50 was found to be 166 dilution factor of the effluent. Chlorophyll a, cell density and dry weight production as biomarkers were negatively affected by high indigo dye effluent concentration, their levels were higher at low effluent concentrations (p <0.05). Changes in coenobia size significantly correlated with the dye effluent concentration. A shift from large to small coenobia with increasing indigo dye effluent concentration was obtained. We conclude that even at low concentrations; effluents from textile industrial processes that use indigo dye are capable of significantly reducing the growth and biomass production, in addition to altering the morphological characteristics of the freshwater microalga S. quadricauda. The systematic reduction in the number of cells per coenobium observed in this study further confirms that environmental stress affects coenobium structure in the genus Scenedesmus, which means it can be considered an important biomarker for toxicity testing.

High Latitude Scintillations during the ICI-4 Rocket Campaign.

NASA Astrophysics Data System (ADS)

Patra, S.; Moen, J.

2015-12-01

We present the first results from the Norwegian ICI-4 sounding rocket campaign in February 2015. The ICI-4 was launched into F-region auroral blobs from the Andøya Space Center. The multi needle langmuir probe (m-NLP) on board the rocket sampled the ionospheric density structures at a sub-meter spatial resolution. A multi-phase screen model has been developed to estimate the scintillations from the density measurements acquired on-board spacecrafts. The phase screen model is validated and the comparison of the estimated values with scintillations measured by ground receivers during the campaign will be presented. A combination of scintillation receivers in Svalbard and surrounding areas as well as all sky imagers at Ny Ålesund, Longyerbyen, and Skibotn are used to improve the performance of the model.

Acceleration levels on board the Space Station and a tethered elevator for micro and variable-gravity applications

NASA Technical Reports Server (NTRS)

Lorenzini, E. C.; Cosmo, M.; Vetrella, S.; Moccia, A.

1988-01-01

This paper investigates the dynamics and acceleration levels of a new tethered system for micro and variable-gravity applications. The system consists of two platforms tethered on opposite sides to the Space Station. A fourth platform, the elevator, is placed in between the Space Station and the upper platform. Variable-g levels on board the elevator are obtained by moving this facility along the upper tether, while micro-g experiments are carried out on board the Space Station. By controlling the length of the lower tether the position of the system CM can be maintained on board the Space Station despite variations of the station's distribution of mass. The paper illustrates the mathematical model, the environmental perturbations and the control techniques which have been adopted for the simulation and control of the system dynamics. Two sets of results from two different simulation runs are shown. The first set shows the system dynamics and the acceleration spectra on board the Space Station and the elevator during station-keeping. The second set of results demonstrates the capability of the elevator to attain a preselected g-level.

An international nanoscience advisory board to improve and harmonize nanotechnology oversight

NASA Astrophysics Data System (ADS)

Marchant, Gary E.; White, Andrew

2011-04-01

As governments around the world begin to implement regulations aimed at controlling nanotechnology, those regulations should be based upon the best available science, applied as consistently as possible within jurisdictions and, to the extent feasible, across jurisdictions. These goals would be easier to achieve with the creation of an international nanoscience advisory board. Such a body could be modeled on similar international scientific advisory bodies for other issues, such as the Intergovernmental Panel on Climate Change (IPCC) and the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services. Such a body should also take into account lessons learned from these similar organizations. An international nanoscience advisory board could assist regulatory bodies by providing a central source of accurate scientific information about the risks and benefits of nanotechnology, including relevant uncertainties, rather than having each regulatory body make these determinations independently. An international nanoscience advisory board could facilitate harmonization within and between jurisdictions by involving the top experts in the field to produce a centralized knowledge base for regulatory decisions. While an international nanoscience advisory board presents many potential benefits, it also faces significant difficulties, which are best illustrated by examining the history and challenges of existing international science advisory bodies.

Women are underrepresented on the editorial boards of journals in environmental biology and natural resource management

PubMed Central

Cho, Alyssa H.; Johnson, Shelly A.; Schuman, Carrie E.; Adler, Jennifer M.; Gonzalez, Oscar; Graves, Sarah J.; Huebner, Jana R.; Marchant, D. Blaine; Rifai, Sami W.; Skinner, Irina

2014-01-01

Despite women earning similar numbers of graduate degrees as men in STEM disciplines, they are underrepresented in upper level positions in both academia and industry. Editorial board memberships are an important example of such positions; membership is both a professional honor in recognition of achievement and an opportunity for professional advancement. We surveyed 10 highly regarded journals in environmental biology, natural resource management, and plant sciences to quantify the number of women on their editorial boards and in positions of editorial leadership (i.e., Associate Editors and Editors-in-Chief) from 1985 to 2013. We found that during this time period only 16% of subject editors were women, with more pronounced disparities in positions of editorial leadership. Although the trend was towards improvement over time, there was surprising variation between journals, including those with similar disciplinary foci. While demographic changes in academia may reduce these disparities over time, we argue journals should proactively strive for gender parity on their editorial boards. This will both increase the number of women afforded the opportunities and benefits that accompany board membership and increase the number of role models and potential mentors for early-career scientists and students. PMID:25177537

10 CFR 611.101 - Application.

Code of Federal Regulations, 2014 CFR

2014-01-01

... using industry standard model (need to add name and location of this open source model) to show... the project is based and applicant's financial model presenting project pro forma statements for the... Standards of Professional Appraisal Practice,” promulgated by the Appraisal Standards Board of the Appraisal...

10 CFR 611.101 - Application.

Code of Federal Regulations, 2012 CFR

2012-01-01

... using industry standard model (need to add name and location of this open source model) to show... the project is based and applicant's financial model presenting project pro forma statements for the... Standards of Professional Appraisal Practice,” promulgated by the Appraisal Standards Board of the Appraisal...

10 CFR 611.101 - Application.

Code of Federal Regulations, 2013 CFR

2013-01-01

... using industry standard model (need to add name and location of this open source model) to show... the project is based and applicant's financial model presenting project pro forma statements for the... Standards of Professional Appraisal Practice,” promulgated by the Appraisal Standards Board of the Appraisal...

Analytical calculation of electrolyte water content of a Proton Exchange Membrane Fuel Cell for on-board modelling applications

NASA Astrophysics Data System (ADS)

Ferrara, Alessandro; Polverino, Pierpaolo; Pianese, Cesare

2018-06-01

This paper proposes an analytical model of the water content of the electrolyte of a Proton Exchange Membrane Fuel Cell. The model is designed by accounting for several simplifying assumptions, which make the model suitable for on-board/online water management applications, while ensuring a good accuracy of the considered phenomena, with respect to advanced numerical solutions. The achieved analytical solution, expressing electrolyte water content, is compared with that obtained by means of a complex numerical approach, used to solve the same mathematical problem. The achieved results show that the mean error is below 5% for electrodes water content values ranging from 2 to 15 (given as boundary conditions), and it does not overcome 0.26% for electrodes water content above 5. These results prove the capability of the solution to correctly model electrolyte water content at any operating condition, aiming at embodiment into more complex frameworks (e.g., cell or stack models), related to fuel cell simulation, monitoring, control, diagnosis and prognosis.

A Comparison of Various Stress Rupture Life Models for Orbiter Composite Pressure Vessels and Confidence Intervals

NASA Technical Reports Server (NTRS)

Grimes-Ledesma, Lorie; Murthy, Pappu L. N.; Phoenix, S. Leigh; Glaser, Ronald

2007-01-01

In conjunction with a recent NASA Engineering and Safety Center (NESC) investigation of flight worthiness of Kevlar Overwrapped Composite Pressure Vessels (COPVs) on board the Orbiter, two stress rupture life prediction models were proposed independently by Phoenix and by Glaser. In this paper, the use of these models to determine the system reliability of 24 COPVs currently in service on board the Orbiter is discussed. The models are briefly described, compared to each other, and model parameters and parameter uncertainties are also reviewed to understand confidence in reliability estimation as well as the sensitivities of these parameters in influencing overall predicted reliability levels. Differences and similarities in the various models will be compared via stress rupture reliability curves (stress ratio vs. lifetime plots). Also outlined will be the differences in the underlying model premises, and predictive outcomes. Sources of error and sensitivities in the models will be examined and discussed based on sensitivity analysis and confidence interval determination. Confidence interval results and their implications will be discussed for the models by Phoenix and Glaser.

An Alternative Lunar Ephemeris Model for On-Board Flight Software Use

NASA Technical Reports Server (NTRS)

Simpson, David G.

1998-01-01

In calculating the position vector of the Moon in on-board flight software, one often begins by using a series expansion to calculate the ecliptic latitude and longitude of the Moon, referred to the mean ecliptic and equinox of date. One then performs a reduction for precession, followed by a rotation of the position vector from the ecliptic plane to the equator, and a transformation from spherical to Cartesian coordinates before finally arriving at the desired result: equatorial J2000 Cartesian components of the lunar position vector. An alternative method is developed here in which the equatorial J2000 Cartesian components of the lunar position vector are calculated directly by a series expansion, saving valuable on-board computer resources.

Travel time reliability modeling.

DOT National Transportation Integrated Search

2011-07-01

This report includes three papers as follows: : 1. Guo F., Rakha H., and Park S. (2010), "A Multi-state Travel Time Reliability Model," : Transportation Research Record: Journal of the Transportation Research Board, n 2188, : pp. 46-54. : 2. Park S.,...

Numerical simulation on behaviour of timber-concrete composite beams in fire

NASA Astrophysics Data System (ADS)

Du, Hao; Hu, Xiamin; Zhang, Bing; Minli, Yao

2017-08-01

This paper established sequentially coupled thermal-mechanical models of timber--concrete composite (TCC) beams by finite element software ANSYS to investigate the fire resistance of TCC beam. Existing experimental results were used to verify the coupled thermal-mechanical model. The influencing parameters consisted of the width of timber beam, the thickness of the concrete slab and the timber board. Based on the numerical results, the effects of these parameters on fire resistance of TCC beams were investigated in detail. The results showed that modeling results agreed well with test results, and verified the reliability of the finite element model. The width of the timber beam had a significant influence on the fire resistance of TCC beams. The fire resistance of TCC beams would be enhanced by increasing the width of timber beam, the thickness of concrete slab and the timber board.

Ground-Handling Forces on a 1/40-scale Model of the U. S. Airship "Akron."

NASA Technical Reports Server (NTRS)

Silverstein, Abe; Gulick, B G

1937-01-01

This report presents the results of full-scale wind tunnel tests conducted to determine the ground-handling forces on a 1/40-scale model of the U. S. Airship "Akron." Ground-handling conditions were simulated by establishing a velocity gradient above a special ground board in the tunnel comparable with that encountered over a landing field. The tests were conducted at Reynolds numbers ranging from 5,000,000 to 19,000,000 at each of six angles of yaw between 0 degree and 180 degrees and at four heights of the model above the ground board. The ground-handling forces vary greatly with the angle of yaw and reach large values at appreciable angles of yaw. Small changes in height, pitch, or roll did not critically affect the forces on the model. In the range of Reynolds numbers tested, no significant variation of the forces with the scale was disclosed.

Validity of the Nintendo Wii® balance board for the assessment of standing balance in Parkinson's disease.

PubMed

Holmes, Jeffrey D; Jenkins, Mary E; Johnson, Andrew M; Hunt, Michael A; Clark, Ross A

2013-04-01

Impaired postural stability places individuals with Parkinson's at an increased risk for falls. Given the high incidence of fall-related injuries within this population, ongoing assessment of postural stability is important. To evaluate the validity of the Nintendo Wii(®) balance board as a measurement tool for the assessment of postural stability in individuals with Parkinson's. Twenty individuals with Parkinson's participated. Subjects completed testing on two balance tasks with eyes open and closed on a Wii(®) balance board and biomechanical force platform. Bland-Altman plots and a two-way, random-effects, single measure intraclass correlation coefficient model were used to assess concurrent validity of centre-of-pressure data. Concurrent validity was demonstrated to be excellent across balance tasks (intraclass correlation coefficients = 0.96, 0.98, 0.92, 0.94). This study suggests that the Wii(®) balance board is a valid tool for the quantification of postural stability among individuals with Parkinson's.

Prediction Model for Impulsive Noise on Structures

DTIC Science & Technology

2012-09-01

construction usually have an interior wall finish of: a) gypsum wallboard (also called plasterboard or drywall), b) plaster or c) wood paneling... Gypsum Plaster , Wall Board 11,67 0.04 NA For simply-supported beams vibrating in their fundamental mode, the value of KS is needed for...Dev of log10(f0) for wood panel interior to be average for wood walls with plaster or gypsum board interior. (8) L(w) based on estimated standard

Application of industrial robots in automatic disassembly line of waste LCD displays

NASA Astrophysics Data System (ADS)

Wang, Sujuan

2017-11-01

In the automatic disassembly line of waste LCD displays, LCD displays are disassembled into plastic shells, metal shields, circuit boards, and LCD panels. Two industrial robots are used to cut metal shields and remove circuit boards in this automatic disassembly line. The functions of these two industrial robots, and the solutions to the critical issues of model selection, the interfaces with PLCs and the workflows were described in detail in this paper.

The Air Force Geophysics Laboratory Standalone Data Acquisition System: A Functional Description.

DTIC Science & Technology

1980-10-09

the board are a buffer for the RUN/HALT front panel switch and a retriggerable oneshot multivibrator. This latter circuit senses the SRUN pulse train...recording on the data tapes, and providing the master timing source for data acquisition. An Electronic Research Company (ERC) model 2446 digital...the computer is fed to a retriggerable oneshot multivibrator on the board. (SRUN consists of a pulse train that is present when the computer is running

GASB's New Financial Reporting Model: Implementation Project for School Districts.

ERIC Educational Resources Information Center

Bean, David; Glick, Paul

1999-01-01

In June 1999, the Governmental Accounting Standards Board (GASB) issued its statement on the structure of the basic financial reporting model for state and local governments. Explains the new financial reporting model and reviews the implementation issues that school districts will need to address. (MLF)

42 CFR 81.12 - Procedure to update NIOSH-IREP.

Code of Federal Regulations, 2012 CFR

2012-10-01

... HEALTH RESEARCH AND RELATED ACTIVITIES GUIDELINES FOR DETERMINING PROBABILITY OF CAUSATION UNDER THE... periodically revise NIOSH-IREP to add, modify, or replace cancer risk models, improve the modeling of... using NIOSH-IREP, including the addition of new cancer risk models) to the Advisory Board on Radiation...

42 CFR 81.12 - Procedure to update NIOSH-IREP.

Code of Federal Regulations, 2013 CFR

2013-10-01

... HEALTH RESEARCH AND RELATED ACTIVITIES GUIDELINES FOR DETERMINING PROBABILITY OF CAUSATION UNDER THE... periodically revise NIOSH-IREP to add, modify, or replace cancer risk models, improve the modeling of... using NIOSH-IREP, including the addition of new cancer risk models) to the Advisory Board on Radiation...

42 CFR 81.12 - Procedure to update NIOSH-IREP.

Code of Federal Regulations, 2011 CFR

2011-10-01

... HEALTH RESEARCH AND RELATED ACTIVITIES GUIDELINES FOR DETERMINING PROBABILITY OF CAUSATION UNDER THE... periodically revise NIOSH-IREP to add, modify, or replace cancer risk models, improve the modeling of... using NIOSH-IREP, including the addition of new cancer risk models) to the Advisory Board on Radiation...

42 CFR 81.12 - Procedure to update NIOSH-IREP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... HEALTH RESEARCH AND RELATED ACTIVITIES GUIDELINES FOR DETERMINING PROBABILITY OF CAUSATION UNDER THE... periodically revise NIOSH-IREP to add, modify, or replace cancer risk models, improve the modeling of... using NIOSH-IREP, including the addition of new cancer risk models) to the Advisory Board on Radiation...

12 CFR 217.153 - Internal models approach (IMA).

Code of Federal Regulations, 2014 CFR

2014-01-01

...-regulated institution must have one or more models that: (i) Assess the potential decline in value of its... idiosyncratic risk. (2) The Board-regulated institution's model must produce an estimate of potential losses for its modeled equity exposures that is no less than the estimate of potential losses produced by a VaR...

Comparison between two models of energy balance in coronal loops

NASA Astrophysics Data System (ADS)

Mac Cormack, C.; López Fuentes, M.; Vásquez, A. M.; Nuevo, F. A.; Frazin, R. A.; Landi, E.

2017-10-01

In this work we compare two models to analyze the energy balance along coronal magnetic loops. For the first stationary model we deduce an expression of the energy balance along the loops expressed in terms of quantities provided by the combination of differential emission measure tomography (DEMT) applied to EUV images time series and potential extrapolations of the coronal magnetic field. The second applied model is a 0D hydrodynamic model that provides the evolution of the average properties of the coronal plasma along the loops, using as input parameters the loop length and the heating rate obtained with the first model. We compare the models for two Carrington rotations (CR) corresponding to different periods of activity: CR 2081, corresponding to a period of minimum activity observed with the Extreme Ultraviolet Imager (EUVI) on board of the Solar Terrestrial Relations Observatory (STEREO), and CR 2099, corresponding to a period of activity increase observed with the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO). The results of the models are consistent for both rotations.

Development of Bread Board Model of TRMM precipitation radar

NASA Astrophysics Data System (ADS)

Okamoto, Ken'ichi; Ihara, Toshio; Kumagai, Hiroshi

The active array radar was selected as a reliable candidate for the TRMM (Tropical Rainfall Measuring Mission) precipitation radar after the trade off studies performed by Communications Research Laboratory (CRL) in the US-Japan joint feasibility study of TRMM in 1987-1988. Main system parameters and block diagram for TRMM precipitation radar are shown as the result of feasibility study. CRL developed key devices for the active array precipitation radar such as 8-element slotted waveguide array antenna, the 5 bit PIN diode phase shifters, solid state power amplifiers and low noise amplifiers in 1988-1990. Integration of these key devices was made to compose 8-element Bread Board Model of TRMM precipitation radar.

Optimal compliant-surface jumping: a multi-segment model of springboard standing jumps.

PubMed

Cheng, Kuangyou B; Hubbard, Mont

2005-09-01

A multi-segment model is used to investigate optimal compliant-surface jumping strategies and is applied to springboard standing jumps. The human model has four segments representing the feet, shanks, thighs, and trunk-head-arms. A rigid bar with a rotational spring on one end and a point mass on the other end (the tip) models the springboard. Board tip mass, length, and stiffness are functions of the fulcrum setting. Body segments and board tip are connected by frictionless hinge joints and are driven by joint torque actuators at the ankle, knee, and hip. One constant (maximum isometric torque) and three variable functions (of instantaneous joint angle, angular velocity, and activation level) determine each joint torque. Movement from a nearly straight motionless initial posture to jump takeoff is simulated. The objective is to find joint torque activation patterns during board contact so that jump height can be maximized. Minimum and maximum joint angles, rates of change of normalized activation levels, and contact duration are constrained. Optimal springboard jumping simulations can reasonably predict jumper vertical velocity and jump height. Qualitatively similar joint torque activation patterns are found over different fulcrum settings. Different from rigid-surface jumping where maximal activation is maintained until takeoff, joint activation decreases near takeoff in compliant-surface jumping. The fulcrum-height relations in experimental data were predicted by the models. However, lack of practice at non-preferred fulcrum settings might have caused less jump height than the models' prediction. Larger fulcrum numbers are beneficial for taller/heavier jumpers because they need more time to extend joints.

Who does it better? The corporate versus the nonprofit governance model.

PubMed

Larson, Laurie

2005-05-01

Weighing the corporate against the nonprofit governance model, the answer may be "neither." Both systems can learn from each other, experts say, and best practices in public companies do not automatically translate to health care boards.

(Q)SAR tools for priority setting: A case study with printed paper and board food contact material substances.

PubMed

Van Bossuyt, Melissa; Van Hoeck, Els; Raitano, Giuseppa; Manganelli, Serena; Braeken, Els; Ates, Gamze; Vanhaecke, Tamara; Van Miert, Sabine; Benfenati, Emilio; Mertens, Birgit; Rogiers, Vera

2017-04-01

Over the last years, more stringent safety requirements for an increasing number of chemicals across many regulatory fields (e.g. industrial chemicals, pharmaceuticals, food, cosmetics, …) have triggered the need for an efficient screening strategy to prioritize the substances of highest concern. In this context, alternative methods such as in silico (i.e. computational) techniques gain more and more importance. In the current study, a new prioritization strategy for identifying potentially mutagenic substances was developed based on the combination of multiple (quantitative) structure-activity relationship ((Q)SAR) tools. Non-evaluated substances used in printed paper and board food contact materials (FCM) were selected for a case study. By applying our strategy, 106 out of the 1723 substances were assigned 'high priority' as they were predicted mutagenic by 4 different (Q)SAR models. Information provided within the models allowed to identify 53 substances for which Ames mutagenicity prediction already has in vitro Ames test results. For further prioritization, additional support could be obtained by applying local i.e. specific models, as demonstrated here for aromatic azo compounds, typically found in printed paper and board FCM. The strategy developed here can easily be applied to other groups of chemicals facing the same need for priority ranking. Copyright © 2017 Elsevier Ltd. All rights reserved.

An Approach for Practical Use of Common-Mode Noise Reduction Technique for In-Vehicle Electronic Equipment

NASA Astrophysics Data System (ADS)

Uno, Takanori; Ichikawa, Kouji; Mabuchi, Yuichi; Nakamura, Atsushi; Okazaki, Yuji; Asai, Hideki

In this paper, we studied the use of common-mode noise reduction technique for in-vehicle electronic equipment in an actual instrument design. We have improved the circuit model of the common-mode noise that flows to the wire harness to add the effect of a bypass capacitor located near the LSI. We analyzed the improved circuit model using a circuit simulator and verified the effectiveness of the noise reduction condition derived from the circuit model. It was also confirmed that offsetting the impedance mismatch in the PCB section requires to make a circuit constant larger than that necessary for doing the impedance mismatch in the LSI section. An evaluation circuit board comprising an automotive microcomputer was prototyped to experiment on the common-mode noise reduction effect of the board. The experimental results showed the noise reduction effect of the board. The experimental results also revealed that the degree of impedance mismatch in the LSI section can be estimated by using a PCB having a known impedance. We further inquired into the optimization of impedance parameters, which is difficult for actual products at present. To satisfy the noise reduction condition composed of numerous parameters, we proposed a design method using an optimization algorithm and an electromagnetic field simulator, and confirmed its effectiveness.

A model-Driven Approach to Customize the Vocabulary of Communication Boards: Towards More Humanization of Health Care.

PubMed

Franco, Natália M; Medeiros, Gabriel F; Silva, Edson A; Murta, Angela S; Machado, Aydano P; Fidalgo, Robson N

2015-01-01

This work presents a Modeling Language and its technological infrastructure to customize the vocabulary of Communication Boards (CB), which are important tools to provide more humanization of health care. Using a technological infrastructure based on Model-Driven Development (MDD) approach, our Modelin Language (ML) creates an abstraction layer between users (e.g., health professionals such as an audiologist or speech therapist) and application code. Moreover, the use of a metamodel enables a syntactic corrector for preventing creation of wrong models. Our ML and metamodel enable more autonomy for health professionals in creating customized CB because it abstracts complexities and permits them to deal only with the domain concepts (e.g., vocabulary and patient needs). Additionally, our infrastructure provides a configuration file that can be used to share and reuse models. This way, the vocabulary modelling effort will decrease our time since people share vocabulary models. Our study provides an infrastructure that aims to abstract the complexity of CB vocabulary customization, giving more autonomy to health professionals when they need customizing, sharing and reusing vocabularies for CB.

Increasing the object recognition distance of compact open air on board vision system

NASA Astrophysics Data System (ADS)

Kirillov, Sergey; Kostkin, Ivan; Strotov, Valery; Dmitriev, Vladimir; Berdnikov, Vadim; Akopov, Eduard; Elyutin, Aleksey

2016-10-01

The aim of this work was developing an algorithm eliminating the atmospheric distortion and improves image quality. The proposed algorithm is entirely software without using additional hardware photographic equipment. . This algorithm does not required preliminary calibration. It can work equally effectively with the images obtained at a distances from 1 to 500 meters. An algorithm for the open air images improve designed for Raspberry Pi model B on-board vision systems is proposed. The results of experimental examination are given.

Food and Nutrition Board update: What do SNAP allotments, physical fitness, and obesity prevention have in common?

PubMed

Meyers, Linda D; Murphy, Suzanne P; Yaktine, Ann L

2013-09-01

The Institute of Medicine's Food and Nutrition Board had a productive year, with important expert committee reports on the Supplemental Food Assistance Program, physical fitness, and accelerating obesity prevention efforts that provided grounding for dietary guidance and nutrition policies and programs. This summary describes Food and Nutrition Board activities, including current thinking on dietary reference intakes. The summary also highlights consensus reports on defining and measuring Supplemental Food Assistance Program benefit adequacy and on physical fitness and health outcomes in youth. In addition, current and new activities related to obesity prevention and care are addressed. What do these activities have in common? All adhere to the Institute of Medicine report model by filling gaps and by being analytical, evidence-based, and challenging.

An on-board near-optimal climb-dash energy management

NASA Technical Reports Server (NTRS)

Weston, A. R.; Cliff, E. M.; Kelley, H. J.

1982-01-01

On-board real time flight control is studied in order to develop algorithms which are simple enough to be used in practice, for a variety of missions involving three dimensional flight. The intercept mission in symmetric flight is emphasized. Extensive computation is required on the ground prior to the mission but the ensuing on-board exploitation is extremely simple. The scheme takes advantage of the boundary layer structure common in singular perturbations, arising with the multiple time scales appropriate to aircraft dynamics. Energy modelling of aircraft is used as the starting point for the analysis. In the symmetric case, a nominal path is generated which fairs into the dash or cruise state. Feedback coefficients are found as functions of the remaining energy to go (dash energy less current energy) along the nominal path.

Sandwich node architecture for agile wireless sensor networks for real-time structural health monitoring applications

NASA Astrophysics Data System (ADS)

Wang, Zi; Pakzad, Shamim; Cheng, Liang

2012-04-01

In recent years, wireless sensor network (WSN), as a powerful tool, has been widely applied to structural health monitoring (SHM) due to its low cost of deployment. Several commercial hardware platforms of wireless sensor networks (WSN) have been developed and used for structural monitoring applications [1,2]. A typical design of a node includes a sensor board and a mote connected to it. Sensing units, analog filters and analog-to-digital converters (ADCs) are integrated on the sensor board and the mote consists of a microcontroller and a wireless transceiver. Generally, there are a set of sensor boards compatible with the same model of mote and the selection of the sensor board depends on the specific applications. A WSN system based on this node lacks the capability of interrupting its scheduled task to start a higher priority task. This shortcoming is rooted in the hardware architecture of the node. The proposed sandwich-node architecture is designed to remedy the shortcomings of the existing one for task preemption. A sandwich node is composed of a sensor board and two motes. The first mote is dedicated to managing the sensor board and processing acquired data. The second mote controls the first mote via commands. A prototype has been implemented using Imote2 and verified by an emulation in which one mote is triggered by a remote base station and then preempts the running task at the other mote for handling an emergency event.

Hydrodynamic characteristics of the oval cambered double slotted otter board in bottom trawl fisheries

NASA Astrophysics Data System (ADS)

Liu, J.; Huang, H. L.; Li, L. Z.; Qu, T. C.; Wu, Y.; Chen, S.; Yang, J. L.; Rao, X.

2017-07-01

The otter board is one of the main components of single boat trawl fisheries. An oval cambered double slotted otter board was developed for improving the expansion performance of trawl net in bottom trawl fisheries. A flume model experiment was conducted to measure the lift coefficient (C L), drag coefficient (C D), and lift to drag ratio (K) in different angles of attack (α). The experimental results are as follows : (1) The C L and K value show a trend of increasing at the beginning and then decreasing with the increase of angle of attack, the C D value reflects an upward trend as the angle of attack increases; (2) The D3 otter board (front flow deflector angle at 29°) showed a better hydrodynamic performance. When α=30°, the max lift coefficient (C Lmax) was 1.464, in this case C D = 0.554 and K=2.643. When α=15°, the max lift to drag ratio (K max) was 4.165, C L =0.633, and C D = 0.152. This suggests that the best working scope for the angle of attack is between 15°~30°, in which case, C L>0.633 and K>2.643. The mean value of the lift coefficient was 1.071 and the mean of the lift to drag ratio was 3.482. Comparative analysis of the hydrodynamic performance of different types of otter boards showed that the D3 otter board both had good expansion performance and efficiency, which can provide a reference basis for further optimization of the bottom trawl otter board.

Enhancing the radiology learning experience with electronic whiteboard technology.

PubMed

Lipton, Michael L; Lipton, Leah G

2010-06-01

The purpose of this study is to quantitatively evaluate the use of an interactive whiteboard for use in teaching diagnostic radiology and MRI physics. An interactive whiteboard (SMART Board model 3000i) was used during an MRI physics course and diagnostic radiology teaching conferences. A multiquestion instrument was used to quantify responses. Responses are reported as simple percentages of response number and, for ordinal scale questions, the two-tailed Student's t test was used to assess deviation from the neutral response. All of the subjects attended all sessions and completed the assessment questionnaire; 89% of respondents said that image quality of the SMART Board was superior to that of a projector-screen combination, 11% said that the image quality was similar, and none said that it was inferior. Sixty-seven percent of respondents said that the SMART Board's display of diagrams was superior to that of a conventional whiteboard, 33% said it was similar, and none said it was inferior. Participants thought that the smaller SMART Board display compared with the projector screen was an unimportant limitation (p = 0.03). Room lighting did not degrade image quality (p = 0.007), and a trend toward preference for the lighted room (while using the SMART Board) was detected (p = 0.15) but was not significant. The impact of the SMART Board on the visual material and flow of teaching sessions was favorable (p = 0.005). All of the subjects preferred the SMART Board over a traditional projector and screen combination. Learners endorsed that the SMART Board significantly enhanced learning, universally preferring it to the standard projector and screen approach. Major advantages include enhanced engagement of learners; enhanced integration of images and annotations or diagrams, including display of both images and diagrams simultaneously on a single screen; and the ability to review, revise, save, and distribute diagrams and annotated images. Disadvantages include cost and potentially complicated setup in very large auditoriums.

Cutting boards in Salmonella cross-contamination.

PubMed

Cliver, Dean O

2006-01-01

Cutting boards are commonly perceived as important fomites in cross-contamination of foods with agents such as Salmonella spp., despite the lack of supporting epidemiological data. A variety of woods and plastics have been used to make work surfaces for cutting. In general, wood is said to dull knives less than plastic, and plastic is seen as less porous than wood. Research to model the hypothetical cross-contamination has been done in a variety of ways and has yielded a variety of results. At least some of the work with knife-scarred plastic indicates that the surface is very difficult to clean and disinfect, although this may vary among the polymers used. High-density polyethylene, which is most used in commercial applications, has been shown to delaminate in response to knife scarring. Wood is intrinsically porous, which allows food juices and bacteria to enter the body of the wood unless a highly hydrophobic residue covers the surface. The moisture is drawn in by capillary action until there is no more free fluid on the surface, at which point immigration ceases. Bacteria in the wood pores are not killed instantly, but neither do they return to the surface. Destructive sampling reveals infectious bacteria for hours, but resurrection of these bacteria via knife edges has not been demonstrated. Small plastic cutting boards can be cleaned in a dishwasher (as can some specially treated wooden boards), but the dishwasher may distribute the bacteria onto other food-contact surfaces. Most small wooden boards (i.e., those with no metal joiners in them) can be sterilized in a microwave oven, but this should be unnecessary if accumulation of food residues is prevented. However, 2 epidemiological studies seem to show that cutting board cleaning habits have little influence on the incidence of sporadic salmonellosis. Further, one of these studies indicated that use of plastic cutting boards in home kitchens is hazardous, whereas use of wooden cutting boards is not.

Center of gravity estimation using a reaction board instrumented with fiber Bragg gratings

NASA Astrophysics Data System (ADS)

Oliveira, Rui; Roriz, Paulo; Marques, Manuel B.; Frazão, Orlando

2018-03-01

The purpose of the present work is to construct a reaction board based on fiber Bragg gratings (FBGs) that could be used for estimation of the 2D coordinates of the projection of center of gravity (CG) of an object. The apparatus is consisted of a rigid equilateral triangular board mounted on three supports at the vertices, two of which have cantilevers instrumented with FBGs. When an object of known weight is placed on the board, the bending strain of the cantilevers is measured by a proportional wavelength shift of the FBGs. Applying the equilibrium conditions of a rigid body and proper calibration procedures, the wavelength shift is used to estimate the vertical reaction forces and moments of force at the supports and the coordinates of the object's CG projection on the board. This method can be used on a regular basis to estimate the CG of the human body or objects with complex geometry and density distribution. An example is provided for the estimation of the CG projection coordinates of two orthopaedic femur bone models, one intact, and the other with a hip stem implant encased. The clinical implications of changing the normal CG location by means of a prosthesis have been discussed.

Key Lessons Learned from Moffitt's Molecular Tumor Board: The Clinical Genomics Action Committee Experience.

PubMed

Knepper, Todd C; Bell, Gillian C; Hicks, J Kevin; Padron, Eric; Teer, Jamie K; Vo, Teresa T; Gillis, Nancy K; Mason, Neil T; McLeod, Howard L; Walko, Christine M

2017-02-01

The increasing practicality of genomic sequencing technology has led to its incorporation into routine clinical practice. Successful identification and targeting of driver genomic alterations that provide proliferative and survival advantages to tumor cells have led to approval and ongoing development of several targeted cancer therapies. Within many major cancer centers, molecular tumor boards are constituted to shepherd precision medicine into clinical practice. In July 2014, the Clinical Genomics Action Committee (CGAC) was established as the molecular tumor board companion to the Personalized Medicine Clinical Service (PMCS) at Moffitt Cancer Center in Tampa, Florida. The processes and outcomes of the program were assessed in order to help others move into the practice of precision medicine. Through the establishment and initial 1,400 patients of the PMCS and its associated molecular tumor board at a major cancer center, five practical lessons of broad applicability have been learned: transdisciplinary engagement, the use of the molecular report as an aid to clinical management, clinical actionability, getting therapeutic options to patients, and financial considerations. Value to patients includes access to cutting-edge practice merged with individualized preferences in treatment and care. Genomic-driven cancer medicine is increasingly becoming a part of routine clinical practice. For successful implementation of precision cancer medicine, strategically organized molecular tumor boards are critical to provide objective evidence-based translation of observed molecular alterations into patient-centered clinical action. Molecular tumor board implementation models along with clinical and economic outcomes will define future treatment standards. The Oncologist 2017;22:144-151 Implications for Practice: It is clear that the increasing practicality of genetic tumor sequencing technology has led to its incorporation as part of routine clinical practice. Subsequently, many cancer centers are seeking to develop a personalized medicine services and/or molecular tumor board to shepherd precision medicine into clinical practice. This article discusses the key lessons learned through the establishment and development of a molecular tumor board and personalized medicine clinical service. This article highlights practical issues and can serve as an important guide to other centers as they conceive and develop their own personalized medicine services and molecular tumor boards. © AlphaMed Press 2017.

Key Lessons Learned from Moffitt's Molecular Tumor Board: The Clinical Genomics Action Committee Experience

PubMed Central

Knepper, Todd C.; Bell, Gillian C.; Hicks, J. Kevin; Padron, Eric; Teer, Jamie K.; Vo, Teresa T.; Gillis, Nancy K.; Mason, Neil T.; Walko, Christine M.

2017-01-01

Abstract Background. The increasing practicality of genomic sequencing technology has led to its incorporation into routine clinical practice. Successful identification and targeting of driver genomic alterations that provide proliferative and survival advantages to tumor cells have led to approval and ongoing development of several targeted cancer therapies. Within many major cancer centers, molecular tumor boards are constituted to shepherd precision medicine into clinical practice. Materials and Methods. In July 2014, the Clinical Genomics Action Committee (CGAC) was established as the molecular tumor board companion to the Personalized Medicine Clinical Service (PMCS) at Moffitt Cancer Center in Tampa, Florida. The processes and outcomes of the program were assessed in order to help others move into the practice of precision medicine. Results. Through the establishment and initial 1,400 patients of the PMCS and its associated molecular tumor board at a major cancer center, five practical lessons of broad applicability have been learned: transdisciplinary engagement, the use of the molecular report as an aid to clinical management, clinical actionability, getting therapeutic options to patients, and financial considerations. Value to patients includes access to cutting‐edge practice merged with individualized preferences in treatment and care. Conclusions. Genomic‐driven cancer medicine is increasingly becoming a part of routine clinical practice. For successful implementation of precision cancer medicine, strategically organized molecular tumor boards are critical to provide objective evidence‐based translation of observed molecular alterations into patient‐centered clinical action. Molecular tumor board implementation models along with clinical and economic outcomes will define future treatment standards. Implications for Practice. It is clear that the increasing practicality of genetic tumor sequencing technology has led to its incorporation as part of routine clinical practice. Subsequently, many cancer centers are seeking to develop a personalized medicine services and/or molecular tumor board to shepherd precision medicine into clinical practice. This article discusses the key lessons learned through the establishment and development of a molecular tumor board and personalized medicine clinical service. This article highlights practical issues and can serve as an important guide to other centers as they conceive and develop their own personalized medicine services and molecular tumor boards. PMID:28179575

Nisqually Community Forest VELMA modeling

EPA Science Inventory

We developed a set of modeling tools to support community-based forest management and salmon-recovery planning in Pacific Northwest watersheds. Here we describe how these tools are being applied to the Mashel River Watershed in collaboration with the Board of Directors of the Nis...

Use of 3D models of vascular rings and slings to improve resident education.

PubMed

Jones, Trahern W; Seckeler, Michael D

2017-09-01

Three-dimensional (3D) printing is a manufacturing method by which an object is created in an additive process, and can be used with medical imaging data to generate accurate physical reproductions of organs and tissues for a variety of applications. We hypothesized that using 3D printed models of congenital cardiovascular lesions to supplement an educational lecture would improve learners' scores on a board-style examination. Patients with normal and abnormal aortic arches were selected and anonymized to generate 3D printed models. A cohort of pediatric and combined pediatric/emergency medicine residents were then randomized to intervention and control groups. Each participant was given a subjective survey and an objective board-style pretest. Each group received the same 20-minutes lecture on vascular rings and slings. During the intervention group's lecture, 3D printed physical models of each lesion were distributed for inspection. After each lecture, both groups completed the same subjective survey and objective board-style test to assess their comfort with and postlecture knowledge of vascular rings. There were no differences in the basic demographics of the two groups. After the lectures, both groups' subjective comfort levels increased. Both groups' scores on the objective test improved, but the intervention group scored higher on the posttest. This study demonstrated a measurable gain in knowledge about vascular rings and pulmonary artery slings with the addition of 3D printed models of the defects. Future applications of this teaching modality could extend to other congenital cardiac lesions and different learners. © 2017 Wiley Periodicals, Inc.

Modeling Payload Stowage Impacts on Fire Risks On-Board the International Space Station

NASA Technical Reports Server (NTRS)

Anton, Kellie e.; Brown, Patrick F.

2010-01-01

The purpose of this presentation is to determine the risks of fire on-board the ISS due to non-standard stowage. ISS stowage is constantly being reexamined for optimality. Non-standard stowage involves stowing items outside of rack drawers, and fire risk is a key concern and is heavily mitigated. A Methodology is needed to account for fire risk due to non-standard stowage to capture the risk. The contents include: 1) Fire Risk Background; 2) General Assumptions; 3) Modeling Techniques; 4) Event Sequence Diagram (ESD); 5) Qualitative Fire Analysis; 6) Sample Qualitative Results for Fire Risk; 7) Qualitative Stowage Analysis; 8) Sample Qualitative Results for Non-Standard Stowage; and 9) Quantitative Analysis Basic Event Data.

The Gulf of Mexico Research Initiative: A Funding Model for Science, Engineering, and Technology

NASA Astrophysics Data System (ADS)

Colwell, R. R.

2016-12-01

The Deepwater Horizon oil spill, a massive ecological event, resulted in the tragic loss of 11 lives, and an environmental release of more than 130 million gallons of crude oil. Approximately 1.8 million gallons of dispersants were used in remediation efforts. An immediate response by BP was to establish a ten-year research program, with funding of 500 million. The funding was to determine the impact and long-term ecological and public health effects of oil spills and to develop improved preparation in the event of future oil or gas release into the environment. This Gulf of Mexico Research Initiative (GoMRI), established by BP, provided independent leadership for both the program and administration of the 500 million funding, and the Research Board provides oversight, assisted by excellent staff. The Research Board of the GoMRI comprises twenty scientists, many of whom have prior scientific research administrative expertise. The Research Board, in accordance with its charge, develops research programs and carries out their evaluation and oversight, employing the peer review and operational principles of the National Science Foundation and the National Academies of Science. With these guiding principles, the Research Board established procedures for conflict of interest oversight and requesting and evaluating research programs. It has also focused on communicating the research findings accurately and responsibly. The GoMRI Research Board operates with transparency and ensures availability of all scientific results and data. GoMRI, currently midway through its 10-year mandate, has funded more than 3,000 scientists, representing 278 institutions in 42 states and 17 countries, who have produced more than 1,000 peer-reviewed publications to date. The Research Board is exploring mechanisms by which the GoMRI science findings can be communicated to the broader community and the public and to continue availability of data when the program has ended. A major contribution of the GoMRI program is that it provides an excellent model for how industry, without conflict of interest, can play a significant role in supporting independent, open scientific research, to address challenges and work to solve societal problems, as well as inform decision-making related to the environment and public health.

Sharpening a District's Leadership Model

ERIC Educational Resources Information Center

Namit, Chuck

2008-01-01

To create an integrated board self-assessment and superintendent evaluation process, district leaders must develop a school leadership model by adopting a coherent governance model. At the same time, they must also develop goals at the appropriate level that ensure quality governance of a school system. In the second of a two-part series, the…

78 FR 5535 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

... and different business model for electronic orders as opposed to open outcry orders leads the Exchange to offer a rebate in order to compete with other exchanges for electronic orders. The business models... because the competitive pressures from other exchanges in electronic orders and different business model...

Developing a Five-Stage Model of Learning in "Second Life"

ERIC Educational Resources Information Center

Salmon, Gilly; Nie, Ming; Edirisingha, Palitha

2010-01-01

Background: In the 1990s, Salmon developed a five-stage model for enabling and scaffolding remote groups to work and learn together using asynchronous bulletin boards. The model has informed online learning and development practice across different levels and education for online and blended learning. Purpose: This paper reports our testing of the…

Optimization Testbed Cometboards Extended into Stochastic Domain

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Pai, Shantaram S.; Coroneos, Rula M.; Patnaik, Surya N.

2010-01-01

COMparative Evaluation Testbed of Optimization and Analysis Routines for the Design of Structures (CometBoards) is a multidisciplinary design optimization software. It was originally developed for deterministic calculation. It has now been extended into the stochastic domain for structural design problems. For deterministic problems, CometBoards is introduced through its subproblem solution strategy as well as the approximation concept in optimization. In the stochastic domain, a design is formulated as a function of the risk or reliability. Optimum solution including the weight of a structure, is also obtained as a function of reliability. Weight versus reliability traced out an inverted-S-shaped graph. The center of the graph corresponded to 50 percent probability of success, or one failure in two samples. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure that corresponded to unity for reliability. Weight can be reduced to a small value for the most failure-prone design with a compromised reliability approaching zero. The stochastic design optimization (SDO) capability for an industrial problem was obtained by combining three codes: MSC/Nastran code was the deterministic analysis tool, fast probabilistic integrator, or the FPI module of the NESSUS software, was the probabilistic calculator, and CometBoards became the optimizer. The SDO capability requires a finite element structural model, a material model, a load model, and a design model. The stochastic optimization concept is illustrated considering an academic example and a real-life airframe component made of metallic and composite materials.

Delft Dashboard: a quick setup tool for coastal and estuarine models

NASA Astrophysics Data System (ADS)

Nederhoff, C., III; Van Dongeren, A.; Van Ormondt, M.; Veeramony, J.

2016-02-01

We developed easy-to-use Delft DashBoard (DDB) software for the rapid set-up of coastal and estuarine hydrodynamic and basic morphological numerical models. In the "Model Maker" toolbox, users have the capability to set-up Delft3D models, in a minimal amount of time (in the order of a hour), for any location in the world. DDB draws upon public internet data sources of bathymetry and tidesto construct the model. With additional toolboxes, these models can be forced with parameterized hurricane wind fields, uplift of the sea surface due to tsunamis nested in publically available ocean models and forced with meteo data (wind speed, pressure, temperature) In this presentation we will show the skill of a model which is setup with Delft Dashboard and compare it to well-calibrated benchmark models. These latter models have been set-up using detailed input data and boundary conditions. We have tested the functionality of Delft DashBoard and evaluate the performance and robustness of the DDB model system on a variety of cases, ranging from a coastal to basin models. Furthermore, we have performed a sensitivity study to investigate the most critical physical and numerical processes. The software can benefit operational modellers, as well as scientists and consultants.

Alberta's and Ontario's liquor boards: why such divergent outcomes?

PubMed

Bird, Malcolm G

2010-01-01

The provinces of Alberta and Ontario have chosen very different methods to distribute alcoholic beverages: Alberta privatized the Alberta Liquor Control Board (ALCB) in 1993 and established a private market to sell beverage alcohol, while Ontario, in stark contrast, opted to retain and expand the Liquor Control Board of Ontario (LCBO). This article examines the reasons for the divergent policy choices made by Ralph Klein and Mike Harris' Conservative governments in each province. The article draws on John Kingdon's “multiple streams decision-making model,” to examine the mindsets of the key decision-makers, as well as “historical institutionalism,” to organize the pertinent structural, historical and institutional variables that shaped the milieu in which decision-makers acted. Unique, province-specific political cultures, histories, institutional configurations (including the relative influence of a number of powerful actors), as well as the fact that the two liquor control boards were on opposing trajectories towards their ultimate fates, help to explain the different decisions made by each government. Endogenous preference construction in this sector, furthermore, implies that each system is able to satisfy all relevant stakeholders, including consumers.

An approach for software-driven and standard-based support of cross-enterprise tumor boards.

PubMed

Mangesius, Patrick; Fischer, Bernd; Schabetsberger, Thomas

2015-01-01

For tumor boards, the networking of different medical disciplines' expertise continues to gain importance. However, interdisciplinary tumor boards spread across several institutions are rarely supported by information technology tools today. The aim of this paper is to point out an approach for a tumor board management system prototype. For analyzing the requirements, an incremental process was used. The requirements were surveyed using Informal Conversational Interview and documented with Use Case Diagrams defined by the Unified Modeling Language (UML). Analyses of current EHR standards were conducted to evaluate technical requirements. Functional and technical requirements of clinical conference applications were evaluated and documented. In several steps, workflows were derived and application mockups were created. Although there is a vast amount of common understanding concerning how clinical conferences should be conducted and how their workflows should be structured, these are hardly standardized, neither on a functional nor on a technical level. This results in drawbacks for participants and patients. Using modern EHR technologies based on profiles such as IHE Cross Enterprise document sharing (XDS), these deficits could be overcome.

1/50 Scale Model Of The 80X120 Foot Wind Tunnel Model (NFAC) In The Test Section Of The 40X80 Wind Tunnel At Nasa Ames.

NASA Image and Video Library

1976-03-12

(03/12/1976) Overhead view of 1/50 scale model of the 80x120 foot wind tunnel model (NFAC) in the test section of the 40x80 wind tunnel at NASA Ames. Model mounted on a rotating ground board designed for this test.

Multivariate regression model for predicting lumber grade volumes of northern red oak sawlogs

Treesearch

Daniel A. Yaussy; Robert L. Brisbin

1983-01-01

A multivariate regression model was developed to predict green board-foot yields for the seven common factory lumber grades processed from northern red oak (Quercus rubra L.) factory grade logs. The model uses the standard log measurements of grade, scaling diameter, length, and percent defect. It was validated with an independent data set. The model...

12 CFR Appendix A to Part 213 - Model Forms

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Model Forms A Appendix A to Part 213 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM CONSUMER LEASING (REGULATION M) Pt. 213, App. A Appendix A to Part 213—Model Forms A-1Model Open-End or Finance Vehicle Lease...

12 CFR Appendix A to Part 213 - Model Forms

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 2 2011-01-01 2011-01-01 false Model Forms A Appendix A to Part 213 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM CONSUMER LEASING (REGULATION M) Pt. 213, App. A Appendix A to Part 213—Model Forms A-1Model Open-End or Finance Vehicle Lease...

Outperforming Game Theoretic Play with Opponent Modeling in Two Player Dominoes

DTIC Science & Technology

2014-03-27

36 III. Methodology Introduction This chapter describes the methodology of how a dominoes artificial intelligence agent employs...Applying this concept to a partially observable game means that both players will have to model each other and have some intelligence of the board...

77 FR 42365 - Health Services Research and Development Service Scientific Merit Review Board, Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-18

... of Health and Care; HSR 3--Methods and Modeling for Research, Informatics, and Surveillance; HSR 4...--Analytics; HCR 4--Models of Care; and HCR 5--Traumatic Brain Injury) will convene from 8 a.m. to 12 noon...

Rethinking the Business Model: Responsibilities of Governing Boards

ERIC Educational Resources Information Center

Trusteeship, 2012

2012-01-01

Colleges and universities are thinking strategically about their business models. Reductions in state and federal appropriations, endowment volatility, fundraising uncertainties, and limits on tuition increases are creating persistent shortfalls in operating budgets. This all comes when institutions are being called upon to enroll and graduate…

Maze solving automatons for self-healing of open interconnects: Modular add-on for circuit boards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nair, Aswathi; Raghunandan, Karthik; Yaswant, Vaddi

We present the circuit board integration of a self-healing mechanism to repair open faults. The electric field driven mechanism physically restores fractured interconnects in electronic circuits and has the ability to solve mazes. The repair is performed by conductive particles dispersed in an insulating fluid. We demonstrate the integration of the healing module onto printed circuit boards and the ability of maze solving. We model and perform experiments on the influence of the geometry of conductive particles as well as the terminal impedances of the route on the healing efficiency. The typical heal rate is 10 μm/s with healed route havingmore » mean resistance of 8 kΩ across a 200 micron gap and depending on the materials and concentrations used.« less

Study on Shear Performance of Cold-formed Steel Composite Wall with New Type of stud

NASA Astrophysics Data System (ADS)

Wang, Chungang; Yue, Sizhe; Liu, Hong; Zhang, Zhuangnan

2018-03-01

The shear resistance of single oriented-strand board wall and single gypsum board wall can be improved in different degrees by increasing strength of steel. The experimental data of literatures were used, and the test specimens had been simulated and validated by ABAQUS finite element analysis. According to the research, it showed that the compressive bearing capacity of the new stud composite wall was much better than the common stud composite wall, so the establishment and research of all models had been based on the new section stud. The analysis results show that when using new type of stud the shear resistance of the single oriented-strand board wall can be improved efficiently by increasing strength of steel, but the shear resistance of the single gypsum wall can be increased little.

SU-F-J-138: An Extension of PCA-Based Respiratory Deformation Modeling Via Multi-Linear Decomposition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iliopoulos, AS; Sun, X; Pitsianis, N

Purpose: To address and lift the limited degree of freedom (DoF) of globally bilinear motion components such as those based on principal components analysis (PCA), for encoding and modeling volumetric deformation motion. Methods: We provide a systematic approach to obtaining a multi-linear decomposition (MLD) and associated motion model from deformation vector field (DVF) data. We had previously introduced MLD for capturing multi-way relationships between DVF variables, without being restricted by the bilinear component format of PCA-based models. PCA-based modeling is commonly used for encoding patient-specific deformation as per planning 4D-CT images, and aiding on-board motion estimation during radiotherapy. However, themore » bilinear space-time decomposition inherently limits the DoF of such models by the small number of respiratory phases. While this limit is not reached in model studies using analytical or digital phantoms with low-rank motion, it compromises modeling power in the presence of relative motion, asymmetries and hysteresis, etc, which are often observed in patient data. Specifically, a low-DoF model will spuriously couple incoherent motion components, compromising its adaptability to on-board deformation changes. By the multi-linear format of extracted motion components, MLD-based models can encode higher-DoF deformation structure. Results: We conduct mathematical and experimental comparisons between PCA- and MLD-based models. A set of temporally-sampled analytical trajectories provides a synthetic, high-rank DVF; trajectories correspond to respiratory and cardiac motion factors, including different relative frequencies and spatial variations. Additionally, a digital XCAT phantom is used to simulate a lung lesion deforming incoherently with respect to the body, which adheres to a simple respiratory trend. In both cases, coupling of incoherent motion components due to a low model DoF is clearly demonstrated. Conclusion: Multi-linear decomposition can enable decoupling of distinct motion factors in high-rank DVF measurements. This may improve motion model expressiveness and adaptability to on-board deformation, aiding model-based image reconstruction for target verification. NIH Grant No. R01-184173.« less

The predictive validity of the MCAT for medical school performance and medical board licensing examinations: a meta-analysis of the published research.

PubMed

Donnon, Tyrone; Paolucci, Elizabeth Oddone; Violato, Claudio

2007-01-01

To conduct a meta-analysis of published studies to determine the predictive validity of the MCAT on medical school performance and medical board licensing examinations. The authors included all peer-reviewed published studies reporting empirical data on the relationship between MCAT scores and medical school performance or medical board licensing exam measures. Moderator variables, participant characteristics, and medical school performance/medical board licensing exam measures were extracted and reviewed separately by three reviewers using a standardized protocol. Medical school performance measures from 11 studies and medical board licensing examinations from 18 studies, for a total of 23 studies, were selected. A random-effects model meta-analysis of weighted effects sizes (r) resulted in (1) a predictive validity coefficient for the MCAT in the preclinical years of r = 0.39 (95% confidence interval [CI], 0.21-0.54) and on the USMLE Step 1 of r = 0.60 (95% CI, 0.50-0.67); and (2) the biological sciences subtest as the best predictor of medical school performance in the preclinical years (r = 0.32 95% CI, 0.21-0.42) and on the USMLE Step 1 (r = 0.48 95% CI, 0.41-0.54). The predictive validity of the MCAT ranges from small to medium for both medical school performance and medical board licensing exam measures. The medical profession is challenged to develop screening and selection criteria with improved validity that can supplement the MCAT as an important criterion for admission to medical schools.

Applying CASE Tools for On-Board Software Development

NASA Astrophysics Data System (ADS)

Brammer, U.; Hönle, A.

For many space projects the software development is facing great pressure with respect to quality, costs and schedule. One way to cope with these challenges is the application of CASE tools for automatic generation of code and documentation. This paper describes two CASE tools: Rhapsody (I-Logix) featuring UML and ISG (BSSE) that provides modeling of finite state machines. Both tools have been used at Kayser-Threde in different space projects for the development of on-board software. The tools are discussed with regard to the full software development cycle.

Evaluation of a Transportable Hot-Gas Decontamination System for the Decontamination of Explosives-Contaminated Debris & Piping. Operations & Maintenance Manual. Volume III.

DTIC Science & Technology

1995-06-27

Terminal Board............ $55.00 CONTROLS E-53-29 ( Non -etock: 2 weeks) Ebony Terminal Board with Screws ..........$70.00 NOTE: All control orders...in XL and TF models after 198 1. Non -asbe stos listed prices. mstedial is used.II Honeywell UDC 3000 Single Set Point Control $550.00 Small Roind...Honeywell. Leeds and Northrup, NOTE- This looks like a mushroom wit a. 314? hole in the Research Inc. and many other controls are available by center

Evidence-Based Adequacy Model for School Funding: Success Rates in Illinois Schools that Meet Targets

ERIC Educational Resources Information Center

Murphy, Gregory J.

2012-01-01

This quantitative study explores the 2010 recommendation of the Educational Funding Advisory Board to consider the Evidence-Based Adequacy model of school funding in Illinois. This school funding model identifies and costs research based practices necessary in a prototypical school and sets funding levels based upon those practices. This study…

Arkansas Public Higher Education Operating & Capital Recommendations, 2009-2011 Biennium. 6-A. Volume 1: Universities

ERIC Educational Resources Information Center

Arkansas Department of Higher Education, 2008

2008-01-01

At its April 25, 2008 meeting, the Arkansas Higher Education Coordinating Board (AHECB) approved the funding models for the two-year colleges, the universities, and the technical centers. These models had been developed in conjunction with the presidents and chancellors after numerous meetings and revisions. The funding models were used to develop…

Maryland's Model Policy to Address Bullying, Harassment, or Intimidation

ERIC Educational Resources Information Center

Maryland State Department of Education, 2016

2016-01-01

In accordance with the provisions of Section 7-424.1 of the Education Article of the Annotated Code of Maryland, the Maryland State Board of Education has developed and adopted a Model Policy to address bullying, harassment, or intimidation. This report presents the Model Policy, which is organized into the following eight points: (1) Prohibition…

Uncertainty and Complexity in Mathematical Modeling

ERIC Educational Resources Information Center

Cannon, Susan O.; Sanders, Mark

2017-01-01

Modeling is an effective tool to help students access mathematical concepts. Finding a math teacher who has not drawn a fraction bar or pie chart on the board would be difficult, as would finding students who have not been asked to draw models and represent numbers in different ways. In this article, the authors will discuss: (1) the properties of…

Engaging Consumer Voices in Health Care Policy: Lessons for Social Work Practice.

PubMed

Law, Kristi Lohmeier; Saunders, A

2016-02-01

Community health centers provide comprehensive public health care in some of the most disadvantaged communities in the United States. To ensure that health centers meet the needs of their consumers, they uniquely engage them in their organizational decision-making and policy-development processes by requiring that their boards of directors encompass a 51 percent consumer majority. To understand the quality of board members' experiences, a critical ethnography was conducted using Arnstein's ladder of citizen participation and the socioecological model as a framework. The analysis identified multiple influences on the quality of participation among consumer members. Findings also confirm other research that has found that knowledge of the economic, political, and cultural factors surrounding the context of the individual health center is important to understanding meaningful participation. The experience is important to understand given the shift driven by the Patient Protection and Affordable Care Act of 2010 in health care, which emphasizes a patient-entered model of care. Social work practitioners and others in the public health arena interested in empowering consumers to have a role in the provision of services need to understand the impact of each of these areas'and the experience of this unique sample of health center board members.

75 FR 22790 - Science Advisory Board Staff Office; Request for Nominations of Candidates for EPA's Advisory...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-30

... modeling; atmospheric science and engineering; ecology and ecological risk assessment; epidemiology... assessment; environmental modeling; industrial ecology; environmental engineering; environmental medicine... ``Ethics Requirements for Advisors'' link on the blue navigational bar on the SAB Web site at http://www...

Transport of polar and non-polar volatile compounds in polystyrene foam and oriented strand board

NASA Astrophysics Data System (ADS)

Yuan, Huali; Little, John C.; Hodgson, Alfred T.

Transport of hexanal and styrene in polystyrene foam (PSF) and oriented strand board (OSB) was characterized. A microbalance was used to measure sorption/desorption kinetics and equilibrium data. While styrene transport in PSF can be described by Fickian diffusion with a symmetrical and reversible sorption/desorption process, hexanal transport in both PSF and OSB exhibited significant hysteresis, with desorption being much slower than sorption. A porous media diffusion model that assumes instantaneous local equilibrium governed by a nonlinear Freundlich isotherm was found to explain the hysteresis in hexanal transport. A new nonlinear sorption and porous diffusion emissions model was, therefore, developed and partially validated using independent chamber data. The results were also compared to the more conventional linear Fickian-diffusion emissions model. While the linear emissions model predicts styrene emissions from PSF with reasonable accuracy, it substantially underestimates the rate of hexanal emissions from OSB. Although further research and more rigorous validation is needed, the new nonlinear emissions model holds promise for predicting emissions of polar VOCs such as hexanal from porous building materials.

Critical rotational speed model of the rotating roll electrode in corona electrostatic separation for recycling waste printed circuit boards.

PubMed

Li, Jia; Lu, Hongzhou; Xu, Zhenming; Zhou, Yaohe

2008-06-15

Waste printed circuit board (PCB) is increasing worldwide. The corona electrostatic separation (CES) was an effective and environmental protection way to recycle resource from waste PCBs. The aim of this paper is to analyze the main factor (rotational speed) that affects the efficiency of CES from the point of view of electrostatics and mechanics. A quantitative method for analyzing the affection of rotational speed was studied and the model for separating flat nonmetal particles in waste PCBs was established. The conception of "charging critical rotational speed" and "detaching critical rotational speed" were presented. Experiments with the waste PCBs verified the theoretical model, and the experimental results were in good agreement with the theoretical model. The results indicated that the purity and recycle percentage of materials got a good level when the rotational speed was about 70 rpm and the critical rotational speed of small particles was higher than big particles. The model can guide the definition of operator parameter and the design of CES, which are needed for the development of any new application of the electrostatic separation method.

Boosting TAG Accumulation with Improved Biodiesel Production from Novel Oleaginous Microalgae Scenedesmus sp. IITRIND2 Utilizing Waste Sugarcane Bagasse Aqueous Extract (SBAE).

PubMed

Arora, Neha; Patel, Alok; Pruthi, Parul A; Pruthi, Vikas

2016-09-01

This investigation utilized sugarcane bagasse aqueous extract (SBAE), a nontoxic, cost-effective medium to boost triacylglycerol (TAG) accumulation in novel fresh water microalgal isolate Scenedesmus sp. IITRIND2. Maximum lipid productivity of 112 ± 5.2 mg/L/day was recorded in microalgae grown in SBAE compared to modified BBM (26 ± 3 %). Carotenoid to chlorophyll ratio was 12.5 ± 2 % higher than in photoautotrophic control, indicating an increase in photosystem II activity, thereby increasing growth rate. Fatty acid methyl ester (FAME) profile revealed presence of C14:0 (2.29 %), C16:0 (15.99 %), C16:2 (4.05 %), C18:0 (3.41 %), C18:1 (41.55 %), C18:2 (12.41), and C20:0 (1.21 %) as the major fatty acids. Cetane number (64.03), cold filter plugging property (-1.05 °C), and oxidative stability (12.03 h) indicated quality biodiesel abiding by ASTM D6751 and EN 14214 fuel standards. Results consolidate the candidature of novel freshwater microalgal isolate Scenedesmus sp. IITRIND2 cultivated in SBAE, aqueous extract made from copious, agricultural waste sugarcane bagasse to increase the lipid productivity, and could further be utilized for cost-effective biodiesel production.

Spatiotemporal Evolution of Calophaca (Fabaceae) Reveals Multiple Dispersals in Central Asian Mountains

PubMed Central

Zhang, Ming-Li; Wen, Zhi-Bin; Fritsch, Peter W.; Sanderson, Stewart C.

2015-01-01

Background The Central Asian flora plays a significant role in Eurasia and the Northern Hemisphere. Calophaca, a member of this flora, includes eight currently recognized species, and is centered in Central Asia, with some taxa extending into adjacent areas. A phylogenetic analysis of the genus utilizing nuclear ribosomal ITS and plastid trnS-trnG and rbcL sequences was carried out in order to confirm its taxonomic status and reconstruct its evolutionary history. Methodology/Principal Finding We employed BEAST Bayesian inference for dating, and S-DIVA and BBM for ancestral area reconstruction, to study its spatiotemporal evolution. Our results show that Calophacais monophyletic and nested within Caragana. The divergence time of Calophaca is estimated at ca. 8.0 Ma, most likely driven by global cooling and aridification, influenced by rapid uplift of the Qinghai Tibet Plateau margins. Conclusions/Significance According to ancestral area reconstructions, the genus most likely originated in the Pamir Mountains, a global biodiversity hotspot and hypothesized Tertiary refugium of many Central Asian plant lineages. Dispersals from this location are inferred to the western Tianshan Mountains, then northward to the Tarbagatai Range, eastward to East Asia, and westward to the Caucasus, Russia, and Europe. The spatiotemporal evolution of Calophaca provides a case contributing to an understanding of the flora and biodiversity of the Central Asian mountains and adjacent regions. PMID:25849146

Localization algorithms for micro-channel x-ray telescope on board SVOM space mission

NASA Astrophysics Data System (ADS)

Gosset, L.; Götz, D.; Osborne, J.; Willingale, R.

2016-07-01

SVOM is a French-Chinese space mission to be launched in 2021, whose goal is the study of Gamma-Ray Bursts, the most powerful stellar explosions in the Universe. The Micro-channel X-ray Telescope (MXT) is an X-ray focusing telescope, on board SVOM, with a field of view of 1 degree (working in the 0.2-10 keV energy band), dedicated to the rapid follow-up of the Gamma-Ray Bursts counterparts and to their precise localization (smaller than 2 arc minutes). In order to reduce the optics mass and to have an angular resolution of few arc minutes, a "lobster-Eye" configuration has been chosen. Using a numerical model of the MXT Point Spread Function (PSF) we simulated MXT observations of point sources in order to develop and test different localization algorithms to be implemented on board MXT. We included preliminary estimations of the instrumental and sky background. The algorithms on board have to be a combination of speed and precision (the brightest sources are expected to be localized at a precision better than 10 arc seconds in the MXT reference frame). We present the comparison between different methods such as barycentre, PSF fitting in one or two dimensions. The temporal performance of the algorithms is being tested using the X-ray afterglow data base of the XRT telescope on board the NASA Swift satellite.

A Compact Cosmic Ray Telescope using Silicon Photomultipliers for use in High Schools

NASA Astrophysics Data System (ADS)

Castro, Luis; Elizondo, Leonardo; Shelor, Mark; Cervantes, Omar; Fan, Sewan; Ritt, Stefan

2016-03-01

Over the years, the QuarkNet and the LBL Cosmic Ray Project have helped trained thousands of high school students and teachers to explore cosmic ray physics. To get high school students in the Salinas, CA area also excited about cosmic rays, we constructed a cosmic ray telescope as a physics outreach apparatus. Our apparatus includes a pair of plastic scintillators coupled to silicon photomultipliers (SiPM) and a coincidence circuit board. We designed and constructed custom circuit boards for mounting the SiPM detectors, the high voltage power supplies and coincidence AND circuit. The AND logic signals can be used for triggering data acquisition devices including an oscilloscope, a waveform digitizer or an Arduino microcontroller. To properly route the circuit wire traces, the circuit boards were layout in Eagle and fabricated in-house using a circuit board maker from LPKF LASER, model Protomat E33. We used a Raspberry Pi computer to control a fast waveform sampler, the DRS4 to digitize the SiPM signal waveforms. The CERN PAW software package was used to analyze the amplitude and time distributions of SiPM detector signals. At this conference, we present our SiPM experimental setup, circuit board fabrication procedures and the data analysis work flow. AIP Megger's Award, Dept. of Ed. Title V Grant PO31S090007.

A76-0634. 1/50 Scale Model Of The 80X120 Foot Wind Tunnel Model (Nfac) In The Test Section Of The 40X80 Foot Wind Tunnel.

NASA Image and Video Library

1996-06-27

(03/12/1976) 1/50 scale model of the 80x120 foot wind tunnel model (NFAC) in the test section of the 40x80 foot wind tunnel. Model mounted on a rotating ground board designed for this test, viewed from the west, oriented for North wind.

Free Legal Services - Attracting Legal Talent for Public Involvement Groups

DOE Office of Scientific and Technical Information (OSTI.GOV)

Domby, A.H.

This paper reviews the public service responsibilities of lawyers, and how they can fulfill the annual goal of performing pro bono services by serving certain public involvement groups, including organization involved in Constitutional issues and environmental protection matters. Public involvement groups should consider their needs for legal services and consider soliciting lawyers to serve on their boards or to volunteer legal services which will assist those lawyers in fulfilling their professional obligations under Rules of Professional Conduct. The group should identify specific activities and tasks that require the skills and training of a lawyer, including corporate governance issues; conflict-of-interest questions;more » the statutory construction of laws, regulations and ordinances; or analysis of potential liability. The addition of a lawyer to advisory boards for governmental agencies and for non-profit boards of charitable, religious, civic, community, environmental and educational organizations may provide those boards with knowledge, analytical approaches and insights that complement the abilities of other board members. Rules of Professional Conduct applicable to lawyers include admonitions for lawyers to provide 'Public Service'. Representative of many rules, the American Bar Association Model Rule 6.1, entitled 'Voluntary Pro Bono Publico Service' addresses every lawyer's professional responsibility to provide legal services to those 'unable to pay'. This Model Rule exhorts each lawyer to provide fifty (50) hours of legal services without fee or expectation of fee to persons of limited means or charitable, religious or civic, community, governmental and educational organizations or to individuals, groups or organizations seeking 'to secure or protect civil rights, civil liberties, or public rights, or charitable, religious, civic, community, governmental and educational organizations in matters in furtherance of their purposes, where the payment of standard legal fees would significantly deplete the organisation's economic resources'. This Public Service rule sets forth a goal that lawyers should aspire to meet; the rule is without disciplinary penalties for its violation. (authors)« less

On-board adaptive model for state of charge estimation of lithium-ion batteries based on Kalman filter with proportional integral-based error adjustment

NASA Astrophysics Data System (ADS)

Wei, Jingwen; Dong, Guangzhong; Chen, Zonghai

2017-10-01

With the rapid development of battery-powered electric vehicles, the lithium-ion battery plays a critical role in the reliability of vehicle system. In order to provide timely management and protection for battery systems, it is necessary to develop a reliable battery model and accurate battery parameters estimation to describe battery dynamic behaviors. Therefore, this paper focuses on an on-board adaptive model for state-of-charge (SOC) estimation of lithium-ion batteries. Firstly, a first-order equivalent circuit battery model is employed to describe battery dynamic characteristics. Then, the recursive least square algorithm and the off-line identification method are used to provide good initial values of model parameters to ensure filter stability and reduce the convergence time. Thirdly, an extended-Kalman-filter (EKF) is applied to on-line estimate battery SOC and model parameters. Considering that the EKF is essentially a first-order Taylor approximation of battery model, which contains inevitable model errors, thus, a proportional integral-based error adjustment technique is employed to improve the performance of EKF method and correct model parameters. Finally, the experimental results on lithium-ion batteries indicate that the proposed EKF with proportional integral-based error adjustment method can provide robust and accurate battery model and on-line parameter estimation.

Integrating the Dimensions of NGSS within a Collaborative Board Game about Honey Bees

PubMed Central

Lauren, Hillary; Lutz, Claudia; Wallon, Robert C.; Hug, Barbara

2016-01-01

The current reform in U.S. science education calls for the integration of three dimensions of science learning in classroom teaching and learning: Science and Engineering Practices, Crosscutting Concepts, and Disciplinary Core Ideas. While the Next Generation Science Standards provide flexibility in how curriculum and instruction are structured to meet learning goals, there are few examples of existing curricula that portray the integration of these dimensions as “three-dimensional learning.” Here, we describe a collaborative board game about honey bees that incorporates scientific evidence on how genetic and environmental factors influence variations of traits and social behavior and requires students to collaboratively examine and use a system model. Furthermore, we show how students used and evaluated the game as a model in authentic classroom settings. PMID:27990024

On-Board Propulsion System Analysis of High Density Propellants

NASA Technical Reports Server (NTRS)

Schneider, Steven J.

1998-01-01

The impact of the performance and density of on-board propellants on science payload mass of Discovery Program class missions is evaluated. A propulsion system dry mass model, anchored on flight-weight system data from the Near Earth Asteroid Rendezvous mission is used. This model is used to evaluate the performance of liquid oxygen, hydrogen peroxide, hydroxylammonium nitrate, and oxygen difluoride oxidizers with hydrocarbon and metal hydride fuels. Results for the propellants evaluated indicate that the state-of-art, Earth Storable propellants with high performance rhenium engine technology in both the axial and attitude control systems has performance capabilities that can only be exceeded by liquid oxygen/hydrazine, liquid oxygen/diborane and oxygen difluoride/diborane propellant combinations. Potentially lower ground operations costs is the incentive for working with nontoxic propellant combinations.

Department of Defense Data Model, Version 1, Fy 1998, Volume 1.

DTIC Science & Technology

1998-05-31

INSTALLATION-POSTAL-ADDRESS INSTALLATION-RESTORATION- ADVISORY -BOARD INSTALLATION-SURVEY INSTALLATION-USPS-POSTAL-ADDRESS INSTALLMENT- PAYMENT ...Standards 5 U SECTION 5 Entity Report 6 SECTION 6 Attribute Report 7 SECTION 7 Entity Relationship Report 8 SECTION 8 DoD Data Model Enhancements Report ...8 SECTION 9 Functional Area Using Model Report 8 Appendix A IDEFlx Modeling Conventions 8 Appendix B Acronyms ; 8 Appendix

Trident Warrior Buoy Testing

DTIC Science & Technology

2013-09-30

the data to track swell events, accurately model swell refraction, and use the data to drive surf -forecasting and other nearshore models (e.g...Temperature (SST). • Addition of a 8GB Micro-SD card for on board time series storage (can be unpopulated or disabled ). • A complete rewrite of the

78 FR 62712 - Rate Adjustment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-22

....e., in an across-the-board fashion. Id. at 2, 12, 35. The Postal Service states that the Governors... Services Worksheets USPS-R2010-4R/7 Product Cost & Contribution Estimation Model (Public Version) USPS... Product Cost & Contribution Estimation Model (Non- Public Version) USPS-R2010-4R/NP2 Cost Factor...

The Influence of the Superintendent of Schools on Student Academic Performance

ERIC Educational Resources Information Center

Hanks, Jeffrey Mark

2010-01-01

The purpose of this study was to model, through structural equation modeling techniques, the relationships among superintendent practices of collaborative goal-setting, establishment of nonnegotiable goals for achievement and instruction, board alignment with and support of district goals, monitoring goals for achievement and instruction, use of…

Modeling the Change in PSAT Scores: A Growth Modeling Approach

ERIC Educational Resources Information Center

Himelfarb, Igor

2012-01-01

The Preliminary SAT/National Merit Scholarship Qualifying Test (PSAT/NMSQT) is a test jointly administrated by the College Board and National Merit Scholarship Corporation, which is used to prepare high school students for the SAT, and as initial screening for numerous scholarships (Marini, Mattern, & Shaw, 2011). Previous research has…

A Search Technique for Weak and Long-Duration Gamma-Ray Bursts from Background Model Residuals

NASA Technical Reports Server (NTRS)

Skelton, R. T.; Mahoney, W. A.

1993-01-01

We report on a planned search technique for Gamma-Ray Bursts too weak to trigger the on-board threshold. The technique is to search residuals from a physically based background model used for analysis of point sources by the Earth occultation method.

76 FR 82332 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

.... Moreover, the competitive pressures from other exchanges in electronic orders and different business model... electronic business and compete with other exchanges for such business. The business models surrounding...). The specific volume thresholds of the Program's tiers were set based upon business determinations and...

Sinte Gleska University Reclaims Land from Loneliness.

ERIC Educational Resources Information Center

Crazy Bull, Cheryl

2000-01-01

Sinte Gleska University's (SGU) model for community development includes transformation of an old boarding school site, community-based collaborations in gardening and nutrition, and a bison restoration project. Tribal members learn to work with the land in harmony with tribal stewardship models as well as Western land use and agricultural…

Model Learner Outcomes for Agriculture/Agribusiness Education.

ERIC Educational Resources Information Center

Minnesota State Dept. of Education, St. Paul.

Chapter 1 of this document contains sets of statements adopted by the Minnesota State Board of Education or Minnesota State Legislature. They represent the hierarchy used by Department of Education staff to develop model learner outcomes for each subject area. Contents include learner values, education system values, philosophy of education,…

Model Learner Outcomes for Home Economics Education.

ERIC Educational Resources Information Center

Rogers, Cheryl, Ed.; And Others

Chapter 1 of this document contains sets of statements adopted by either the Minnesota State Board of Education or the Minnesota State Legislature. They represent the hierarchy used by Department of Education staff as they develop model learner outcomes for each subject area. Contents include learner values, education system values, philosophy for…

The Increased Pluralism and Politicization of Public Education--Coping with Conflict.

ERIC Educational Resources Information Center

Coleman, Peter

Power, or influence, in educational governance is increasingly becoming diffused. Everyone in education now feels relatively powerless. A political model of decision-making, emphasizing consultation with representatives of interest groups is now appropriate. In this model, the school board functions as "meta-mediator." This modifies the…

On-board fault management for autonomous spacecraft

NASA Technical Reports Server (NTRS)

Fesq, Lorraine M.; Stephan, Amy; Doyle, Susan C.; Martin, Eric; Sellers, Suzanne

1991-01-01

The dynamic nature of the Cargo Transfer Vehicle's (CTV) mission and the high level of autonomy required mandate a complete fault management system capable of operating under uncertain conditions. Such a fault management system must take into account the current mission phase and the environment (including the target vehicle), as well as the CTV's state of health. This level of capability is beyond the scope of current on-board fault management systems. This presentation will discuss work in progress at TRW to apply artificial intelligence to the problem of on-board fault management. The goal of this work is to develop fault management systems. This presentation will discuss work in progress at TRW to apply artificial intelligence to the problem of on-board fault management. The goal of this work is to develop fault management systems that can meet the needs of spacecraft that have long-range autonomy requirements. We have implemented a model-based approach to fault detection and isolation that does not require explicit characterization of failures prior to launch. It is thus able to detect failures that were not considered in the failure and effects analysis. We have applied this technique to several different subsystems and tested our approach against both simulations and an electrical power system hardware testbed. We present findings from simulation and hardware tests which demonstrate the ability of our model-based system to detect and isolate failures, and describe our work in porting the Ada version of this system to a flight-qualified processor. We also discuss current research aimed at expanding our system to monitor the entire spacecraft.

Development and Commissioning Results of the Hybrid Sensor Bus Engineering Qualification Model

NASA Astrophysics Data System (ADS)

Hurni, Andreas; Putzer, Phillipp; Roner, Markus; Gurster, Markus; Hulsemeyer, Christian; Lemke, Norbert M. K.

2016-08-01

In order to reduce mass, AIT effort and overall costs of classical point-to-point wired temperature sensor harness on-board spacecraft OHB System AGhas introduced the Hybrid Sensor Bus (HSB) system which interrogates sensors connected in a bus architecture. To use the advantages of electrical as wellas of fiber-optical sensing technologies, HSB is designed as a modular measurement system interrogating digital sensors connected on electricalsensor buses based on I2C and fiber-optical sensor buses based on fiber Bragg grating (FBG) sensors inscribed in optical fibers. Fiber-optical sensor bus networks on-board satellites are well suited for temperature measurement due to low mass, electro-magnetic insensitivity and the capability to embed them inside structure parts. The lightweight FBG sensors inscribed in radiation tolerant fibers can reach every part of the satellite. HSB has been developed in the frame of the ESA ARTES program with European and German co- funding and will be verified as flight demonstrator on- board the German Heinrich Hertz satellite (H2Sat).In this paper the Engineering Qualification Model (EQM) development of HSB and first commissioning results are presented. For the HSB development requirements applicable for telecommunication satellite platforms have been considered. This includes an operation of at least 15 years in a geostationary orbit.In Q3/2016 the qualification test campaign is planned to be carried out. The HSB EQM undergoes a full qualification according to ECSS. The paper concludes with an outlook regarding this HSB flight demonstrator development and its in-orbit verification (IOV) on board H2Sat.

Testing of the on-board attitude determination and control algorithms for SAMPEX

NASA Technical Reports Server (NTRS)

Mccullough, Jon D.; Flatley, Thomas W.; Henretty, Debra A.; Markley, F. Landis; San, Josephine K.

1993-01-01

Algorithms for on-board attitude determination and control of the Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) have been expanded to include a constant gain Kalman filter for the spacecraft angular momentum, pulse width modulation for the reaction wheel command, an algorithm to avoid pointing the Heavy Ion Large Telescope (HILT) instrument boresight along the spacecraft velocity vector, and the addition of digital sun sensor (DSS) failure detection logic. These improved algorithms were tested in a closed-loop environment for three orbit geometries, one with the sun perpendicular to the orbit plane, and two with the sun near the orbit plane - at Autumnal Equinox and at Winter Solstice. The closed-loop simulator was enhanced and used as a truth model for the control systems' performance evaluation and sensor/actuator contingency analysis. The simulations were performed on a VAX 8830 using a prototype version of the on-board software.

Design and characterization of an ocean wave powered lifejacket using 2DOF floating boards

NASA Astrophysics Data System (ADS)

Mi, Jia; Xu, Lin; Yang, Yaling; Zuo, Lei

2018-04-01

Lifejacket is an indispensable life-saving equipment for ships and airplanes. Traditional lifejacket is designed to prevent human from drowning. However, the water temperature is usually low, especially in winter, which significantly reduces the human body temperature and leads to death. Meanwhile, power is critical for drowning people to use emergency communication equipment. This paper proposed an ocean wave powered lifejacket using 2DOF floating boards to provide both buoyance and electricity for drowning people. Hence, they can use this continuous electric power to keep key body warm and send distress signal. This lifejacket is featured with two 2DOF floating boards and the mechanical motion rectifier (MMR) can convert the 2-DOF motions to the unidirectional rotation of generator. The design principle is illustrated and the dynamic modelling for the 2-DOF motions has been analyzed. Bench test and lake test have been conducted to validate the design concept.

When patients govern: federal grant funding and uncompensated care at federally qualified health centers.

PubMed

Wright, Brad; Ricketts, Thomas C

2013-05-01

To determine if the proportion of consumers on federally qualified health center (FQHC) governing boards is associated with their use of federal grant funds to provide uncompensated care. Using FQHC data from the Uniform Data System, county-level data from the Area Resource File and governing board data from FQHC grant applications, the uncompensated care an FQHC provides relative to the amount of its federal funding is modeled as a function of board and executive committee composition using fixed-effects regression with FQHC and county-level controls. Consumer governance does not predict how much uncompensated care an FQHC provides relative to the size of its federal grant. Rather, the proportion of an FQHC's patient-mix that is uninsured drives uncompensated care provision. Aside from a small executive committee effect, consumer governance does not influence FQHCs' provision of uncompensated care. More work is needed to understand the role of consumer governance.

Intelligent Rover Execution for Detecting Life in the Atacama Desert

NASA Technical Reports Server (NTRS)

Baskaran, Vijayakumar; Muscettola, Nicola; Rijsman, David; Plaunt, Chris; Fry, Chuck

2006-01-01

On-board supervisory execution is crucial for the deployment of more capable and autonomous remote explorers. Planetary science is considering robotic explorers operating for long periods of time without ground supervision while interacting with a changing and often hostile environment. Effective and robust operations require on-board supervisory control with a high level of awareness of the principles of functioning of the environment and of the numerous internal subsystems that need to be coordinated. We describe an on-board rover executive that was deployed on a rover as past of the "Limits of Life in the Atacama Desert (LITA)" field campaign sponsored by the NASA ASTEP program. The executive was built using the Intelligent Distributed Execution Architecture (IDEA), an execution framework that uses model-based and plan-based supervisory control of its fundamental computational paradigm. We present the results of the third field experiment conducted in the Atacama desert (Chile) in August - October 2005.

Autonomous navigation using lunar beacons

NASA Technical Reports Server (NTRS)

Khatib, A. R.; Ellis, J.; French, J.; Null, G.; Yunck, T.; Wu, S.

1983-01-01

The concept of using lunar beacon signal transmission for on-board navigation for earth satellites and near-earth spacecraft is described. The system would require powerful transmitters on the earth-side of the moon's surface and black box receivers with antennae and microprocessors placed on board spacecraft for autonomous navigation. Spacecraft navigation requires three position and three velocity elements to establish location coordinates. Two beacons could be soft-landed on the lunar surface at the limits of allowable separation and each would transmit a wide-beam signal with cones reaching GEO heights and be strong enough to be received by small antennae in near-earth orbit. The black box processor would perform on-board computation with one-way Doppler/range data and dynamical models. Alternatively, GEO satellites such as the GPS or TDRSS spacecraft can be used with interferometric techniques to provide decimeter-level accuracy for aircraft navigation.

A Streaming Language Implementation of the Discontinuous Galerkin Method

NASA Technical Reports Server (NTRS)

Barth, Timothy; Knight, Timothy

2005-01-01

We present a Brook streaming language implementation of the 3-D discontinuous Galerkin method for compressible fluid flow on tetrahedral meshes. Efficient implementation of the discontinuous Galerkin method using the streaming model of computation introduces several algorithmic design challenges. Using a cycle-accurate simulator, performance characteristics have been obtained for the Stanford Merrimac stream processor. The current Merrimac design achieves 128 Gflops per chip and the desktop board is populated with 16 chips yielding a peak performance of 2 Teraflops. Total parts cost for the desktop board is less than $20K. Current cycle-accurate simulations for discretizations of the 3-D compressible flow equations yield approximately 40-50% of the peak performance of the Merrimac streaming processor chip. Ongoing work includes the assessment of the performance of the same algorithm on the 2 Teraflop desktop board with a target goal of achieving 1 Teraflop performance.

Iterative development of visual control systems in a research vivarium.

PubMed

Bassuk, James A; Washington, Ida M

2014-01-01

The goal of this study was to test the hypothesis that reintroduction of Continuous Performance Improvement (CPI) methodology, a lean approach to management at Seattle Children's (Hospital, Research Institute, Foundation), would facilitate engagement of vivarium employees in the development and sustainment of a daily management system and a work-in-process board. Such engagement was implemented through reintroduction of aspects of the Toyota Production System. Iterations of a Work-In-Process Board were generated using Shewhart's Plan-Do-Check-Act process improvement cycle. Specific attention was given to the importance of detecting and preventing errors through assessment of the following 5 levels of quality: Level 1, customer inspects; Level 2, company inspects; Level 3, work unit inspects; Level 4, self-inspection; Level 5, mistake proofing. A functioning iteration of a Mouse Cage Work-In-Process Board was eventually established using electronic data entry, an improvement that increased the quality level from 1 to 3 while reducing wasteful steps, handoffs and queues. A visual workplace was realized via a daily management system that included a Work-In-Process Board, a problem solving board and two Heijunka boards. One Heijunka board tracked cage changing as a function of a biological kanban, which was validated via ammonia levels. A 17% reduction in cage changing frequency provided vivarium staff with additional time to support Institute researchers in their mutual goal of advancing cures for pediatric diseases. Cage washing metrics demonstrated an improvement in the flow continuum in which a traditional batch and queue push system was replaced with a supermarket-type pull system. Staff engagement during the improvement process was challenging and is discussed. The collective data indicate that the hypothesis was found to be true. The reintroduction of CPI into daily work in the vivarium is consistent with the 4P Model of the Toyota Way and selected Principles that guide implementation of the Toyota Production System.

Iterative Development of Visual Control Systems in a Research Vivarium

PubMed Central

Bassuk, James A.; Washington, Ida M.

2014-01-01

The goal of this study was to test the hypothesis that reintroduction of Continuous Performance Improvement (CPI) methodology, a lean approach to management at Seattle Children’s (Hospital, Research Institute, Foundation), would facilitate engagement of vivarium employees in the development and sustainment of a daily management system and a work-in-process board. Such engagement was implemented through reintroduction of aspects of the Toyota Production System. Iterations of a Work-In-Process Board were generated using Shewhart’s Plan-Do-Check-Act process improvement cycle. Specific attention was given to the importance of detecting and preventing errors through assessment of the following 5 levels of quality: Level 1, customer inspects; Level 2, company inspects; Level 3, work unit inspects; Level 4, self-inspection; Level 5, mistake proofing. A functioning iteration of a Mouse Cage Work-In-Process Board was eventually established using electronic data entry, an improvement that increased the quality level from 1 to 3 while reducing wasteful steps, handoffs and queues. A visual workplace was realized via a daily management system that included a Work-In-Process Board, a problem solving board and two Heijunka boards. One Heijunka board tracked cage changing as a function of a biological kanban, which was validated via ammonia levels. A 17% reduction in cage changing frequency provided vivarium staff with additional time to support Institute researchers in their mutual goal of advancing cures for pediatric diseases. Cage washing metrics demonstrated an improvement in the flow continuum in which a traditional batch and queue push system was replaced with a supermarket-type pull system. Staff engagement during the improvement process was challenging and is discussed. The collective data indicate that the hypothesis was found to be true. The reintroduction of CPI into daily work in the vivarium is consistent with the 4P Model of the Toyota Way and selected Principles that guide implementation of the Toyota Production System. PMID:24736460

7 CFR 7.27 - Political activity.

Code of Federal Regulations, 2012 CFR

2012-01-01

... members of school boards, soil conservation district boards, weed control district boards, or of similar..., irrigation district boards, drainage district boards, weed control district boards, or for similar boards are...

7 CFR 7.27 - Political activity.

Code of Federal Regulations, 2011 CFR

2011-01-01

... members of school boards, soil conservation district boards, weed control district boards, or of similar..., irrigation district boards, drainage district boards, weed control district boards, or for similar boards are...

Retrospective Analysis of NIST Standard Reference Material 1450, Fibrous Glass Board, for Thermal Insulation Measurements.

PubMed

Zarr, Robert R; Heckert, N Alan; Leigh, Stefan D

2014-01-01

Thermal conductivity data acquired previously for the establishment of Standard Reference Material (SRM) 1450, Fibrous Glass Board, as well as subsequent renewals 1450a, 1450b, 1450c, and 1450d, are re-analyzed collectively and as individual data sets. Additional data sets for proto-1450 material lots are also included in the analysis. The data cover 36 years of activity by the National Institute of Standards and Technology (NIST) in developing and providing thermal insulation SRMs, specifically high-density molded fibrous-glass board, to the public. Collectively, the data sets cover two nominal thicknesses of 13 mm and 25 mm, bulk densities from 60 kg·m(-3) to 180 kg·m(-3), and mean temperatures from 100 K to 340 K. The analysis repetitively fits six models to the individual data sets. The most general form of the nested set of multilinear models used is given in the following equation: [Formula: see text]where λ(ρ,T) is the predicted thermal conductivity (W·m(-1)·K(-1)), ρ is the bulk density (kg·m(-3)), T is the mean temperature (K) and ai (for i = 1, 2, … 6) are the regression coefficients. The least squares fit results for each model across all data sets are analyzed using both graphical and analytic techniques. The prevailing generic model for the majority of data sets is the bilinear model in ρ and T. [Formula: see text] One data set supports the inclusion of a cubic temperature term and two data sets with low-temperature data support the inclusion of an exponential term in T to improve the model predictions. Physical interpretations of the model function terms are described. Recommendations for future renewals of SRM 1450 are provided. An Addendum provides historical background on the origin of this SRM and the influence of the SRM on external measurement programs.

Vive la Difference: What It Means for State Boards to Embrace Two Models for Public Education

ERIC Educational Resources Information Center

Smarick, Andy

2017-01-01

The charter school model differs fundamentally from the district-based model of public education delivery that is still dominant in every state. Instead of creating government bodies that directly operate all of an area's public schools, the state approves entities that authorize and oversee schools run by nonprofit organizations. In this article,…

The "Policy-Preferences Model": A New Perspective on How Researchers Can Facilitate the Take-Up of Evidence by Educational Policy Makers

ERIC Educational Resources Information Center

Brown, Chris

2012-01-01

The phrase "knowledge adoption" refers to the often-complicated process by which policy makers "take on board" evidence. While models have been put forward to explain this activity, this paper argues that such models are flawed and fail to fully address those complexities affecting the successful realisation of knowledge…

Multivariate regression model for predicting yields of grade lumber from yellow birch sawlogs

Treesearch

Andrew F. Howard; Daniel A. Yaussy

1986-01-01

A multivariate regression model was developed to predict green board-foot yields for the common grades of factory lumber processed from yellow birch factory-grade logs. The model incorporates the standard log measurements of scaling diameter, length, proportion of scalable defects, and the assigned USDA Forest Service log grade. Differences in yields between band and...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dmitriev, Alexander S.; Yemelyanov, Ruslan Yu.; Moscow Institute of Physics and Technology

The paper deals with a new multi-element processor platform assigned for modelling the behaviour of interacting dynamical systems, i.e., active wireless network. Experimentally, this ensemble is implemented in an active network, the active nodes of which include direct chaotic transceivers and special actuator boards containing microcontrollers for modelling the dynamical systems and an information display unit (colored LEDs). The modelling technique and experimental results are described and analyzed.

Dyadic, Triadic, and Group Models of Peer Supervision/Consultation: What Are Their Components, and Is There Evidence of Their Effectiveness?

ERIC Educational Resources Information Center

Borders, L. DiAnne

2012-01-01

Models that meet the Psychology Board of Australia's definition of peer consultation include dyadic, triadic, and group formats. Components of these models (e.g., goals, theoretical basis, role of leader, members' roles, structure, and steps in procedure, stages in group development) are presented, and evidence of their effectiveness is reviewed.…

Standardized model of porcine resuscitation using a custom-made resuscitation board results in optimal hemodynamic management.

PubMed

Wollborn, Jakob; Ruetten, Eva; Schlueter, Bjoern; Haberstroh, Joerg; Goebel, Ulrich; Schick, Martin A

2018-01-22

Standardized modeling of cardiac arrest and cardiopulmonary resuscitation (CPR) is crucial to evaluate new treatment options. Experimental porcine models are ideal, closely mimicking human-like physiology. However, anteroposterior chest diameter differs significantly, being larger in pigs and thus poses a challenge to achieve adequate perfusion pressures and consequently hemodynamics during CPR, which are commonly achieved during human resuscitation. The aim was to prove that standardized resuscitation is feasible and renders adequate hemodynamics and perfusion in pigs, using a specifically designed resuscitation board for a pneumatic chest compression device. A "porcine-fit" resuscitation board was designed for our experiments to optimally use a pneumatic compression device (LUCAS® II, Physio-Control Inc.), which is widely employed in emergency medicine and ideal in an experimental setting due to its high standardization. Asphyxial cardiac arrest was induced in 10 German hybrid landrace pigs and cardiopulmonary resuscitation was performed according to ERC/AHA 2015 guidelines with mechanical chest compressions. Hemodynamics were measured in the carotid and pulmonary artery. Furthermore, arterial blood gas was drawn to assess oxygenation and tissue perfusion. The custom-designed resuscitation board in combination with the LUCAS® device demonstrated highly sufficient performance regarding hemodynamics during CPR (mean arterial blood pressure, MAP 46 ± 1 mmHg and mean pulmonary artery pressure, mPAP of 36 ± 1 mmHg over the course of CPR). MAP returned to baseline values at 2 h after ROSC (80 ± 4 mmHg), requiring moderate doses of vasopressors. Furthermore, stroke volume and contractility were analyzed using pulse contour analysis (106 ± 3 ml and 1097 ± 22 mmHg/s during CPR). Blood gas analysis revealed CPR-typical changes, normalizing in the due course. Thermodilution parameters did not show persistent intravascular volume shift. Standardized cardiopulmonary resuscitation is feasible in a porcine model, achieving adequate hemodynamics and consecutive tissue perfusion of consistent quality. Copyright © 2018 Elsevier Inc. All rights reserved.

Effect of Emergency Department and ICU Occupancy on Admission Decisions and Outcomes for Critically Ill Patients.

PubMed

Mathews, Kusum S; Durst, Matthew S; Vargas-Torres, Carmen; Olson, Ashley D; Mazumdar, Madhu; Richardson, Lynne D

2018-05-01

ICU admission delays can negatively affect patient outcomes, but emergency department volume and boarding times may also affect these decisions and associated patient outcomes. We sought to investigate the effect of emergency department and ICU capacity strain on ICU admission decisions and to examine the effect of emergency department boarding time of critically ill patients on in-hospital mortality. A retrospective cohort study. Single academic tertiary care hospital. Adult critically ill emergency department patients for whom a consult for medical ICU admission was requested, over a 21-month period. None. Patient data, including severity of illness (Mortality Probability Model III on Admission), outcomes of mortality and persistent organ dysfunction, and hourly census reports for the emergency department, for all ICUs and all adult wards were compiled. A total of 854 emergency department requests for ICU admission were logged, with 455 (53.3%) as "accept" and 399 (46.7%) as "deny" cases, with median emergency department boarding times 4.2 hours (interquartile range, 2.8-6.3 hr) and 11.7 hours (3.2-20.3 hr) and similar rates of persistent organ dysfunction and/or death 41.5% and 44.6%, respectively. Those accepted were younger (mean ± SD, 61 ± 17 vs 65 ± 18 yr) and more severely ill (median Mortality Probability Model III on Admission score, 15.3% [7.0-29.5%] vs 13.4% [6.3-25.2%]) than those denied admission. In the multivariable model, a full medical ICU was the only hospital-level factor significantly associated with a lower probability of ICU acceptance (odds ratio, 0.55 [95% CI, 0.37-0.81]). Using propensity score analysis to account for imbalances in baseline characteristics between those accepted or denied for ICU admission, longer emergency department boarding time after consult was associated with higher odds of mortality and persistent organ dysfunction (odds ratio, 1.77 [1.07-2.95]/log10 hour increase). ICU admission decisions for critically ill emergency department patients are affected by medical ICU bed availability, though higher emergency department volume and other ICU occupancy did not play a role. Prolonged emergency department boarding times were associated with worse patient outcomes, suggesting a need for improved throughput and targeted care for patients awaiting ICU admission.

An overview: modern techniques for railway vehicle on-board health monitoring systems

NASA Astrophysics Data System (ADS)

Li, Chunsheng; Luo, Shihui; Cole, Colin; Spiryagin, Maksym

2017-07-01

Health monitoring systems with low-cost sensor networks and smart algorithms are always needed in both passenger trains and heavy haul trains due to the increasing need for reliability and safety in the railway industry. This paper focuses on an overview of existing approaches applied for railway vehicle on-board health monitoring systems. The approaches applied in the data measurement systems and the data analysis systems in railway on-board health monitoring systems are presented in this paper, including methodologies, theories and applications. The pros and cons of the various approaches are analysed to determine appropriate benchmarks for an effective and efficient railway vehicle on-board health monitoring system. According to this review, inertial sensors are the most popular due to their advantages of low cost, robustness and low power consumption. Linearisation methods are required for the model-based methods which would inevitably introduce error to the estimation results, and it is time-consuming to include all possible conditions in the pre-built database required for signal-based methods. Based on this review, future development trends in the design of new low-cost health monitoring systems for railway vehicles are discussed.

Formaldehyde sorption and desorption characteristics of gypsum wallboard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matthews, T.G.; Hawthorne, A.R.; Thompson, C.V.

1986-01-01

The sorption and subsequent desorption of formaldehyde (CH/sub 2/O) vapor from unpainted gypsum wallboard has been investigated in environmental chamber experiments conducted at 23/sup 0/C, 50% relative humidity, an air exchange to board loading ratio of 0.43 m/h, and CH/sub 2/O concentrations ranging from 0 to 0.50 mg/m/sup 3/. Both CH/sub 2/O sorption and desorption processes are described using a three-parameter, single-exponential model with an exponential lifetime of 2.9 +- 0.1 days. The storage capacity of gypsum board for CH/sub 2/O vapor results in a time-dependent buffer to changes in CH/sub 2/O vapor concentration surrounding the board, but appears tomore » cause only a weak, permanent loss mechanism for CH/sub 2/O vapor. Short-term CH/sub 2/O desorption rates from CH/sub 2/O-exposed gypsum board (prior to significant depletion of sorbed CH/sub 2/O) exhibit a linear dependence with negative slope on CH/sub 2/O vapor concentration analogous to CH/sub 2/O emissions from pressed-wood products bonded with urea-formaldehyde resins.« less

The financial consequences of lost demand and reducing boarding in hospital emergency departments.

PubMed

Pines, Jesse M; Batt, Robert J; Hilton, Joshua A; Terwiesch, Christian

2011-10-01

Some have suggested that emergency department (ED) boarding is prevalent because it maximizes revenue as hospitals prioritize non-ED admissions, which reimburse higher than ED admissions. We explore the revenue implications to the overall hospital of reducing boarding in the ED. We quantified the revenue effect of reducing boarding-the balance of higher ED demand and the reduction of non-ED admissions-using financial modeling informed by regression analysis and discrete-event simulation with data from 1 inner-city teaching hospital during 2 years (118,000 ED visits, 22% ED admission rate, 7% left without being seen rate, 36,000 non-ED admissions). Various inpatient bed management policies for reducing non-ED admissions were tested. Non-ED admissions generated more revenue than ED admissions ($4,118 versus $2,268 per inpatient day). A 1-hour reduction in ED boarding time would result in $9,693 to $13,298 of additional daily revenue from capturing left without being seen and diverted ambulance patients. To accommodate this demand, we found that simulated management policies in which non-ED admissions are reduced without consideration to hospital capacity (ie, static policies) mostly did not result in higher revenue. Many dynamic policies requiring cancellation of various proportions of non-ED admissions when the hospital reaches specific trigger points increased revenue. The optimal strategies tested resulted in an estimated $2.7 million and $3.6 in net revenue per year, depending on whether left without being seen patients were assumed to be outpatients or mirrored ambulatory admission rates, respectively. Dynamic inpatient bed management in inner-city teaching hospitals in which non-ED admissions are occasionally reduced to ensure that EDs have reduced boarding times is a financially attractive strategy. Copyright © 2010 American College of Emergency Physicians. Published by Mosby, Inc. All rights reserved.

7 CFR 1250.304 - Egg Board or Board.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Egg Board or Board. 1250.304 Section 1250.304... AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE EGG RESEARCH AND PROMOTION Egg Research and Promotion Order Definitions § 1250.304 Egg Board or Board. Egg Board or Board or other...

7 CFR 1250.304 - Egg Board or Board.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 10 2011-01-01 2011-01-01 false Egg Board or Board. 1250.304 Section 1250.304... AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE EGG RESEARCH AND PROMOTION Egg Research and Promotion Order Definitions § 1250.304 Egg Board or Board. Egg Board or Board or other...

Parametric diagnosis of the adaptive gas path in the automatic control system of the aircraft engine

NASA Astrophysics Data System (ADS)

Kuznetsova, T. A.

2017-01-01

The paper dwells on the adaptive multimode mathematical model of the gas-turbine aircraft engine (GTE) embedded in the automatic control system (ACS). The mathematical model is based on the throttle performances, and is characterized by high accuracy of engine parameters identification in stationary and dynamic modes. The proposed on-board engine model is the state space linearized low-level simulation. The engine health is identified by the influence of the coefficient matrix. The influence coefficient is determined by the GTE high-level mathematical model based on measurements of gas-dynamic parameters. In the automatic control algorithm, the sum of squares of the deviation between the parameters of the mathematical model and real GTE is minimized. The proposed mathematical model is effectively used for gas path defects detecting in on-line GTE health monitoring. The accuracy of the on-board mathematical model embedded in ACS determines the quality of adaptive control and reliability of the engine. To improve the accuracy of identification solutions and sustainability provision, the numerical method of Monte Carlo was used. The parametric diagnostic algorithm based on the LPτ - sequence was developed and tested. Analysis of the results suggests that the application of the developed algorithms allows achieving higher identification accuracy and reliability than similar models used in practice.

Cardiovascular Research Foundation

MedlinePlus

Home About Us The Problem Our Model Leadership Faculty Board of Directors Management Team Advancements Drug-eluting stents TAVR Bioresorbable stents Clinicians and Industry Innovate Skirball Center for Innovation Investigate Clinical Trials Center Educate Center for ...

76 FR 61350 - Environmental Management Site-Specific Advisory Board, Paducah

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-04

... Water Model. [cir] Presentation by Swift & Staley: Environmental Information Center. Subcommittee Chairs... in the agenda. The Deputy Designated Federal Officer is empowered to conduct the meeting in a fashion...

77 FR 60146 - SES Performance Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-02

... NATIONAL TRANSPORTATION SAFETY BOARD SES Performance Review Board AGENCY: National Transportation... National Transportation Safety Board, Performance Review Board (PRB). FOR FURTHER INFORMATION CONTACT... Performance Review Boards. The board reviews and evaluates the initial appraisal of a senior executive's...

76 FR 70169 - SES Performance Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-10

... NATIONAL TRANSPORTATION SAFETY BOARD SES Performance Review Board AGENCY: National Transportation... National Transportation Safety Board, Performance Review Board (PRB). FOR FURTHER INFORMATION CONTACT... Performance Review Boards. The board reviews and evaluates the initial appraisal of a senior executive's...

Epilepsy-related romantic and sexual relationship problems and concerns: Indications from Internet message boards.

PubMed

Miller, Wendy R; Gesselman, Amanda N; Garcia, Justin R; Groves, Doyle; Buelow, Janice M

2017-09-01

The objective of this study was to, utilizing a Big Data set and innovative methods, explore romantic and sexual relationship-related concerns among people with epilepsy and their partners. We applied Word Adjacency Graph modeling to more than 2000 message board posts, and five distinct categories of romantic and sexual relationship-related concerns emerged. We conclude that persons with epilepsy are at particular risk for the experience of decrements in their romantic and sexual relationships, which can negatively impact their self-management and overall health. Copyright © 2017. Published by Elsevier Inc.

Bayesian Software Health Management for Aircraft Guidance, Navigation, and Control

NASA Technical Reports Server (NTRS)

Schumann, Johann; Mbaya, Timmy; Menghoel, Ole

2011-01-01

Modern aircraft, both piloted fly-by-wire commercial aircraft as well as UAVs, more and more depend on highly complex safety critical software systems with many sensors and computer-controlled actuators. Despite careful design and V&V of the software, severe incidents have happened due to malfunctioning software. In this paper, we discuss the use of Bayesian networks (BNs) to monitor the health of the on-board software and sensor system, and to perform advanced on-board diagnostic reasoning. We will focus on the approach to develop reliable and robust health models for the combined software and sensor systems.

The Short, Productive Board Meeting

ERIC Educational Resources Information Center

McAdams, Donald R.

2005-01-01

Board meetings are the time and place where school boards act. In fact, only when coming together as a body in a legal meeting do school board members become a board. Effective board meetings are the first prerequisite for an effective board. Furthermore, what parents and voters see at board meetings determines largely what they think about their…

DORIS/Jason-2: Better than 10 cm on-board orbits available for Near-Real-Time Altimetry

NASA Astrophysics Data System (ADS)

Jayles, C.; Chauveau, J. P.; Rozo, F.

2010-12-01

DIODE (DORIS Immediate Orbit on-board Determination) is a real-time on-board orbit determination software, embedded in the DORIS receiver. The purpose of this paper is to focus on DIODE performances. After a description of the recent DORIS evolutions, we detail how compliance with specifications are verified during extensive ground tests before the launch, then during the in-flight commissioning phase just after the launch, and how well they are met in the routine phase and today. Future improvements are also discussed for Jason-2 as well as for the next missions. The complete DORIS ground validation using DORIS simulator and new DORIS test equipments has shown prior to the Jason-2 flight that every functional requirement was fulfilled, and also that better than 10 cm real-time DIODE orbits would be achieved on-board Jason-2. The first year of Jason-2 confirmed this, and after correction of a slowly evolving polar motion error at the end of the commissioning phase, the DIODE on-board orbits are indeed better than the 10 cm specification: in the beginning of the routine phase, the discrepancy was already 7.7 cm Root-Mean-Square (RMS) in the radial component as compared to the final Precise Orbit Ephemerides (POE) orbit. Since the first day of Jason-2 cycle 1, the real-time DIODE orbits have been delivered in the altimetry fast delivery products. Their accuracy and their 100% availability make them a key input to fairly precise Near-Real-Time Altimetry processing. Time-tagging is at the microsecond level. In parallel, a few corrections (quaternion problem) and improvements have been gathered in an enhanced version of DIODE, which is already implemented and validated. With this new version, a 5 cm radial accuracy is achieved during ground validation over more than Jason-2 first year (cycles 1-43, from July 12th, 2008 to September 11th, 2009). The Seattle Ocean Surface Topography Science Team Meeting (OSTST) has recommended an upload of this v4.02 version on-board Jason-2 in order to take benefit from more accurate real-time orbits. For the future, perhaps the most important point of this work is that a 9 mm consistency is observed on-ground between simulated and adjusted orbits, proving that the DORIS measurement is very precisely and properly modelled in the DIODE navigation software. This implies that improvement of DIODE accuracy is still possible and should be driven by enhancement of the physical models: forces and perturbations of the satellite movement, Radio/Frequency phenomena perturbing measurements. A 2-cm accuracy is possible with future versions, if analysis and model improvements continue to progress.

Reducing On-Board Computer Propagation Errors Due to Omitted Geopotential Terms by Judicious Selection of Uploaded State Vector

NASA Technical Reports Server (NTRS)

Greatorex, Scott (Editor); Beckman, Mark

1996-01-01

Several future, and some current missions, use an on-board computer (OBC) force model that is very limited. The OBC geopotential force model typically includes only the J(2), J(3), J(4), C(2,2) and S(2,2) terms to model non-spherical Earth gravitational effects. The Tropical Rainfall Measuring Mission (TRMM), Wide-field Infrared Explorer (WIRE), Transition Region and Coronal Explorer (TRACE), Submillimeter Wave Astronomy Satellite (SWAS), and X-ray Timing Explorer (XTE) all plan to use this geopotential force model on-board. The Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) is already flying this geopotential force model. Past analysis has shown that one of the leading sources of error in the OBC propagated ephemeris is the omission of the higher order geopotential terms. However, these same analyses have shown a wide range of accuracies for the OBC ephemerides. Analysis was performed using EUVE state vectors that showed the EUVE four day OBC propagated ephemerides varied in accuracy from 200 m. to 45 km. depending on the initial vector used to start the propagation. The vectors used in the study were from a single EUVE orbit at one minute intervals in the ephemeris. Since each vector propagated practically the same path as the others, the differences seen had to be due to differences in the inital state vector only. An algorithm was developed that will optimize the epoch of the uploaded state vector. Proper selection can reduce the previous errors of anywhere from 200 m. to 45 km. to generally less than one km. over four days of propagation. This would enable flight projects to minimize state vector uploads to the spacecraft. Additionally, this method is superior to other methods in that no additional orbit estimates need be done. The definitive ephemeris generated on the ground can be used as long as the proper epoch is chosen. This algorithm can be easily coded in software that would pick the epoch within a specified time range that would minimize the OBC propagation error. This techniques should greatly improve the accuracy of the OBC propagation on-board future spacecraft such as TRMM, WIRE, SWAS, and XTE without increasing complexity in the ground processing.

75 FR 69706 - SES Performance Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-15

... NATIONAL TRANSPORTATION SAFETY BOARD SES Performance Review Board AGENCY: National Transportation... National Transportation Safety Board Performance Review Board (PRB). FOR FURTHER INFORMATION CONTACT: Emily... Review Boards. The board reviews and evaluates the initial appraisal of a senior executive's performance...

The Measurement of the Solar Spectral Irradiance Variability at 782 nm during the Solar Cycle 24 using the SES on-board PICARD

NASA Astrophysics Data System (ADS)

Meftah, Mustapha; Hauchecorne, Alain; Irbah, Abdanour; Bekki, Slimane

2016-04-01

A Sun Ecartometry Sensor (SES) was developed to provide the stringent pointing requirements of the PICARD satellite. The SES sensor produced an image of the Sun at 782+/-5 nm. From the SES data, we obtained a new time series of the solar spectral irradiance at 782nm from 2010 to 2014. SES observations provided a qualitatively consistent evolution of the solar spectral irradiance variability at 782 nm during the solar cycle 24. Comparisons will be made with Spectral And Total Irradiance REconstruction for the Satellite era (SATIRE-S) semi-empirical model and with the Spectral Irradiance Monitor instrument (SIM) on-board the Solar Radiation and Climate Experiment satellite (SORCE). These data will help to improve the representation of the solar forcing in the IPSL Global Circulation Model.

The techniques of quality operations computational and experimental researches of the launch vehicles in the drawing-board stage

NASA Astrophysics Data System (ADS)

Rozhaeva, K.

2018-01-01

The aim of the researchis the quality operations of the design process at the stage of research works on the development of active on-Board system of the launch vehicles spent stages descent with liquid propellant rocket engines by simulating the gasification process of undeveloped residues of fuel in the tanks. The design techniques of the gasification process of liquid rocket propellant components residues in the tank to the expense of finding and fixing errors in the algorithm calculation to increase the accuracy of calculation results is proposed. Experimental modelling of the model liquid evaporation in a limited reservoir of the experimental stand, allowing due to the false measurements rejection based on given criteria and detected faults to enhance the results reliability of the experimental studies; to reduce the experiments cost.

REVIEW OF THE NEGOTIATION OF THE MODEL PROTOCOL ADDITIONAL TO THE AGREEMENT(S) BETWEEN STATE(S) AND THE INTERNATIONAL ATOMIC ENERGY AGENCY FOR THE APPLICATION OF SAFEGUARDS, INFCIRC/540 (Corrected) VOLUME II/III IAEA COMMITTEE 24, Major Issues Underlying the Model Additional Protocol (1996-1997).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenthal, M.D.; Saum-Manning, L.; Houck, F.

Volume I of this Review traces the origins of the Model Additional Protocol. It covers the period from 1991, when events in Iraq triggered an intensive review of the safeguards system, until 1996, when the IAEA Board of Governors established Committee 24 to negotiate a new protocol to safeguards agreement. The period from 1991-1996 set the stage for this negotiation and shaped its outcome in important ways. During this 5-year period, many proposals for strengthening safeguards were suggested and reviewed. Some proposals were dropped, for example, the suggestion by the IAEA Secretariat to verify certain imports, and others were refined.more » A rough consensus was established about the directions in which the international community wanted to go, and this was reflected in the draft of an additional protocol that was submitted to the IAEA Board of Governors on May 6, 1996 in document GOV/2863, Strengthening the Effectiveness and Improving the Efficiency of the Safeguards System - Proposals For Implementation Under Complementary Legal Authority, A Report by the Director General. This document ended with a recommendation that, 'the Board, through an appropriate mechanism, finalize the required legal instrument taking as a basis the draft protocol proposed by the Secretariat and the explanation of the measures contained in this document.'« less

The Science of Standards-Based Education

ERIC Educational Resources Information Center

Smithson, John

2017-01-01

A standards-based model of reform has dominated public education for 30 years. Under the Every Student Succeeds Act (ESSA), it will continue to dominate education policy. Is that model working? State boards of education share an intrinsic interest in this question. While there are many ways to investigate it, one approach that shows promise treats…

Capturing business requirements for the Swedish national information structure.

PubMed

Kajbjer, Karin; Johansson, Catharina

2009-01-01

As a subproject for the National Information Structure project of the National Board of Health and Welfare, four different stakeholder groups were used to capture business requirements. These were: Subjects of care, Health professionals, Managers/Research and Industry. The process is described with formulating goal models, concept, process and information models.

A Continuum Model of Social/Sexual Curriculum and Programming Services.

ERIC Educational Resources Information Center

Heler, Ann, Ed.

This packet of materials from the Wayne County (Michigan) Intermediate School District offers a continuum model of social/sexual curriculum and programming services. Materials include: (1) a copy of a district school board policy giving school districts permission to pursue these curriculum areas; (2) staff guidelines for dealing with students…

Suspending School Boards: The Legal-Financial Picture in Ontario.

ERIC Educational Resources Information Center

MacNeil, Byrdena M.

2003-01-01

Describes issues related to the Ontario educational reform legislation, a significant aspect of which is a new student-focused funding model. The stated purpose of the new funding model is to ensure that education funding operates in a "fair and nondiscriminatory manner" across the province. Asserts that the legislation does not satisfactorily…

JSTOR: The Development of a Cost-Driven, Value-Based Pricing Model.

ERIC Educational Resources Information Center

Guthrie, Kevin M.

JSTOR (Journal STORage project) began as a project of The Andrew W. Mellon Foundation designed to help libraries address growing persistent space problems. JSTOR was established as an independent not-for-profit organization with its own Board of Trustees in August 1995. This paper summarizes how JSTOR's economic model was developed, lessons…

California Integrated Service Delivery Evaluation Report. Phase I

ERIC Educational Resources Information Center

Moore, Richard W.; Rossy, Gerard; Roberts, William; Chapman, Kenneth; Sanchez, Urte; Hanley, Chris

2010-01-01

This study is a formative evaluation of the OneStop Career Center Integrated Service Delivery (ISD) Model within the California Workforce System. The study was sponsored by the California Workforce Investment Board. The study completed four in-depth case studies of California OneStops to describe how they implemented the ISD model which brings…

Why Inquiry Is Inherently Difficult...and Some Ways to Make It Easier

ERIC Educational Resources Information Center

Meyer, Daniel Z.; Avery, Leanne M.

2010-01-01

In this article, the authors offer a framework that identifies two critical problems in designing inquiry-based instruction and suggests three models for developing instruction that overcomes those problems. The Protocol Model overcomes the Getting on Board Problem by providing students an initial experience through clearly delineated steps with a…

Arkansas Public Higher Education Operating Recommendations: Fiscal Year 2010-11. Volume 1: Universities

ERIC Educational Resources Information Center

Arkansas Department of Higher Education, 2010

2010-01-01

At its April 25, 2008 meeting, the Arkansas Higher Education Coordinating Board approved the funding models for the two-year colleges, universities, and the technical centers (former technical institutes merged with universities). These models had been developed in conjunction with presidents and chancellors after meetings and revisions. The…

Closing the Gap. SREB Program Blends Academic Standards, Vocational Courses.

ERIC Educational Resources Information Center

Bottoms, Gene

1992-01-01

Southern Regional Education Board's State Vocational Education Consortium developed a model for integrating vocational and academic education that includes at least three credits each in math and science; four English courses; and four credits in a vocational major and two in related fields. Eight sites implementing the model have narrowed gap…

Finding One's Voice: The Pacesetter Model for More Equitable Assessment.

ERIC Educational Resources Information Center

Badger, Elizabeth

1996-01-01

Describes the College Board's Pacesetter Program, high school courses developed using principles of ongoing performance testing and portfolios, standards, and curriculum. The model is illustrated in a description of the Voices of Modern Culture language arts course. Argues that this assessment process has systemic validity and is more relevant to…

Academic Freedom in Classroom Speech: A Heuristic Model for U.S. Catholic Higher Education

ERIC Educational Resources Information Center

Jacobs, Richard M.

2010-01-01

As the nation's Catholic universities and colleges continually clarify their identity, this article examines academic freedom in classroom speech, offering a heuristic model for use as board members, academic administrators, and faculty leaders discuss, evaluate, and judge allegations of misconduct in classroom speech. Focusing upon the practice…

12 CFR >appendix A to Part 239 - Mutual Holding Company Model Charter

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 4 2013-01-01 2013-01-01 false Mutual Holding Company Model Charter A >Appendix A to Part 239 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MUTUAL HOLDING COMPANIES (REGULATION MM) Pt. 239, App. A >Appendix A to...

Development of a Simulation Capability for the Space Station Active Rack Isolation System

NASA Technical Reports Server (NTRS)

Johnson, Terry L.; Tolson, Robert H.

1998-01-01

To realize quality microgravity science on the International Space Station, many microgravity facilities will utilize the Active Rack Isolation System (ARIS). Simulation capabilities for ARIS will be needed to predict the microgravity environment. This paper discusses the development of a simulation model for use in predicting the performance of the ARIS in attenuating disturbances with frequency content between 0.01 Hz and 10 Hz. The derivation of the model utilizes an energy-based approach. The complete simulation includes the dynamic model of the ISPR integrated with the model for the ARIS controller so that the entire closed-loop system is simulated. Preliminary performance predictions are made for the ARIS in attenuating both off-board disturbances as well as disturbances from hardware mounted onboard the microgravity facility. These predictions suggest that the ARIS does eliminate resonant behavior detrimental to microgravity experimentation. A limited comparison is made between the simulation predictions of ARIS attenuation of off-board disturbances and results from the ARIS flight test. These comparisons show promise, but further tuning of the simulation is needed.

Theoretic model and computer simulation of separating mixture metal particles from waste printed circuit board by electrostatic separator.

PubMed

Li, Jia; Xu, Zhenming; Zhou, Yaohe

2008-05-30

Traditionally, the mixture metals from waste printed circuit board (PCB) were sent to the smelt factory to refine pure copper. Some valuable metals (aluminum, zinc and tin) with low content in PCB were lost during smelt. A new method which used roll-type electrostatic separator (RES) to recovery low content metals in waste PCB was presented in this study. The theoretic model which was established from computing electric field and the analysis of forces on the particles was used to write a program by MATLAB language. The program was design to simulate the process of separating mixture metal particles. Electrical, material and mechanical factors were analyzed to optimize the operating parameters of separator. The experiment results of separating copper and aluminum particles by RES had a good agreement with computer simulation results. The model could be used to simulate separating other metal (tin, zinc, etc.) particles during the process of recycling waste PCBs by RES.

Improved estimation of commuter waiting times using headway and commuter boarding information

NASA Astrophysics Data System (ADS)

Ramli, Muhamad Azfar; Jayaraman, Vasundhara; Kwek, Hyen Chee; Tan, Kian Heong; Lee Kee Khoon, Gary; Monterola, Christopher

2018-07-01

The average amount of waiting time spent by commuters is one of the key indicators of service quality for public bus operations. While actual measurements of actual waiting time is difficult to be done en masse, models of waiting time can be derived from bus headways and these models have been adopted by transport planners in monitoring and regulating service reliability of operators. However, these models are founded on several assumptions on the patterns of commuter arrival which may not be applicable for bus services that experience high demand and heavily fluctuating commuter patterns. Given the availability of granular data on commuter boarding from automated fare collection systems, we propose a new methodology to better estimate the average waiting time of commuters. The formulation is anchored and validated using a three-month dataset from ten selected bus routes in Singapore. Finally, we discuss how our new measure allows for minimization of commuter waiting time through schedule optimization.

Exploring the influence of a social ecological model on school-based physical activity.

PubMed

Langille, Jessie-Lee D; Rodgers, Wendy M

2010-12-01

Among rising rates of overweight and obesity, schools have become essential settings to promote health behaviors, such as physical activity (PA). As schools exist within a broader environment, the social ecological model (SEM) provided a framework to consider how different levels interact and influence PA. The purpose of this study was to provide insight on school-based PA promotion by investigating the integration between different levels of Emmons's SEM within one public school board in a large Canadian city. Interviews were conducted with participants from the government (n = 4), the public school board (n = 3), principals (n = 3), and teachers (n = 4) and analyzed to explore perspectives on the various levels of the model. The results suggested that higher level policies "trickled down" into the organizational level of the SEM but there was pivotal responsibility for schools to determine how to implement PA strategies. Furthermore, schools have difficulty implementing PA because of the continued priority of academic achievement.

Missileborne Artificial Vision System (MAVIS)

NASA Technical Reports Server (NTRS)

Andes, David K.; Witham, James C.; Miles, Michael D.

1994-01-01

Several years ago when INTEL and China Lake designed the ETANN chip, analog VLSI appeared to be the only way to do high density neural computing. In the last five years, however, digital parallel processing chips capable of performing neural computation functions have evolved to the point of rough equality with analog chips in system level computational density. The Naval Air Warfare Center, China Lake, has developed a real time, hardware and software system designed to implement and evaluate biologically inspired retinal and cortical models. The hardware is based on the Adaptive Solutions Inc. massively parallel CNAPS system COHO boards. Each COHO board is a standard size 6U VME card featuring 256 fixed point, RISC processors running at 20 MHz in a SIMD configuration. Each COHO board has a companion board built to support a real time VSB interface to an imaging seeker, a NTSC camera, and to other COHO boards. The system is designed to have multiple SIMD machines each performing different corticomorphic functions. The system level software has been developed which allows a high level description of corticomorphic structures to be translated into the native microcode of the CNAPS chips. Corticomorphic structures are those neural structures with a form similar to that of the retina, the lateral geniculate nucleus, or the visual cortex. This real time hardware system is designed to be shrunk into a volume compatible with air launched tactical missiles. Initial versions of the software and hardware have been completed and are in the early stages of integration with a missile seeker.

Home Page, Alaska Department of Fish and Game

Science.gov Websites

Orders Media/Press Releases Hot Topics & Issues Board of Fisheries and Game: Actions & Activities Habitat Special Areas Fish Habitat Boards Board of Game Board of Fisheries The Joint Board Commissioner Maps & Area Information File Hunt Report Trapping Boards Board of Fisheries Board of Game

Dry Chemical Development - A Model for the Extinction of Hydrocarbon Flames.

DTIC Science & Technology

1984-02-08

and predicts the suppression effectiveness of a wide variety of gaseous, liquid, and solid agents . The flame extinguishment model is based on the...generalized by consideration of all endothermic reaction sinks, eg., vaporization, dissociation, and decomposition. The general equation correlates...CHEMICAL DEVELOPMENT - A MODEL FOR THE EXTINCTION OF HYDROCARBON FLAMES Various fire-extinguishing agents are carried on board Navy ships to control

Removing lead from metallic mixture of waste printed circuit boards by vacuum distillation: factorial design and removal mechanism.

PubMed

Li, Xingang; Gao, Yujie; Ding, Hui

2013-10-01

The lead removal from the metallic mixture of waste printed circuit boards by vacuum distillation was optimized using experimental design, and a mathematical model was established to elucidate the removal mechanism. The variables studied in lead evaporation consisted of the chamber pressure, heating temperature, heating time, particle size and initial mass. The low-level chamber pressure was fixed at 0.1 Pa as the operation pressure. The application of two-level factorial design generated a first-order polynomial that agreed well with the data for evaporation efficiency of lead. The heating temperature and heating time exhibited significant effects on the efficiency, which was validated by means of the copper-lead mixture experiments. The optimized operating conditions within the region studied were the chamber pressure of 0.1 Pa, heating temperature of 1023 K and heating time of 120 min. After the conditions were employed to remove lead from the metallic mixture of waste printed circuit boards, the efficiency was 99.97%. The mechanism of the effects was elucidated by mathematical modeling that deals with evaporation, mass transfer and condensation, and can be applied to a wider range of metal removal by vacuum distillation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Adaptive approach for on-board impedance parameters and voltage estimation of lithium-ion batteries in electric vehicles

NASA Astrophysics Data System (ADS)

Farmann, Alexander; Waag, Wladislaw; Sauer, Dirk Uwe

2015-12-01

Robust algorithms using reduced order equivalent circuit model (ECM) for an accurate and reliable estimation of battery states in various applications become more popular. In this study, a novel adaptive, self-learning heuristic algorithm for on-board impedance parameters and voltage estimation of lithium-ion batteries (LIBs) in electric vehicles is introduced. The presented approach is verified using LIBs with different composition of chemistries (NMC/C, NMC/LTO, LFP/C) at different aging states. An impedance-based reduced order ECM incorporating ohmic resistance and a combination of a constant phase element and a resistance (so-called ZARC-element) is employed. Existing algorithms in vehicles are much more limited in the complexity of the ECMs. The algorithm is validated using seven day real vehicle data with high temperature variation including very low temperatures (from -20 °C to +30 °C) at different Depth-of-Discharges (DoDs). Two possibilities to approximate both ZARC-elements with finite number of RC-elements on-board are shown and the results of the voltage estimation are compared. Moreover, the current dependence of the charge-transfer resistance is considered by employing Butler-Volmer equation. Achieved results indicate that both models yield almost the same grade of accuracy.

7 CFR 1160.105 - Board.

Code of Federal Regulations, 2010 CFR

2010-01-01

... and Orders; Milk), DEPARTMENT OF AGRICULTURE FLUID MILK PROMOTION PROGRAM Fluid Milk Promotion Order Definitions § 1160.105 Board. Board means the National Processor Advertising and Promotion Board established... Promotion Board or Board). ...

49 CFR 1011.2 - The Board.

Code of Federal Regulations, 2010 CFR

2010-10-01

... TRANSPORTATION GENERAL RULES AND REGULATIONS BOARD ORGANIZATION; DELEGATIONS OF AUTHORITY § 1011.2 The Board. (a... submitted for decision except those assigned to an individual Board Member or employee or an employee board...) The Board may bring before it any matter assigned to an individual Board Member or employee or...

Modelling the evolution of a bi-partite network Peer referral in interlocking directorates*

PubMed Central

Edling, Christofer

2010-01-01

A central part of relational ties between social actors are constituted by shared affiliations and events. The action of joint participation reinforces personal ties between social actors as well as mutually shared values and norms that in turn perpetuate the patterns of social action that define groups. Therefore the study of bipartite networks is central to social science. Furthermore, the dynamics of these processes suggests that bipartite networks should not be considered static structures but rather be studied over time. In order to model the evolution of bipartite networks empirically we introduce a class of models and a Bayesian inference scheme that extends previous stochastic actor-oriented models for unimodal graphs. Contemporary research on interlocking directorates provides an area of research in which it seems reasonable to apply the model. Specifically, we address the question of how tie formation, i.e. director recruitment, contributes to the structural properties of the interlocking directorate network. For boards of directors on the Stockholm stock exchange we propose that a prolific mechanism in tie formation is that of peer referral. The results indicate that such a mechanism is present, generating multiple interlocks between boards. PMID:24944435

On-Ground Processing of Yaogan-24 Remote Sensing Satellite Attitude Data and Verification Using Geometric Field Calibration

PubMed Central

Wang, Mi; Fan, Chengcheng; Yang, Bo; Jin, Shuying; Pan, Jun

2016-01-01

Satellite attitude accuracy is an important factor affecting the geometric processing accuracy of high-resolution optical satellite imagery. To address the problem whereby the accuracy of the Yaogan-24 remote sensing satellite’s on-board attitude data processing is not high enough and thus cannot meet its image geometry processing requirements, we developed an approach involving on-ground attitude data processing and digital orthophoto (DOM) and the digital elevation model (DEM) verification of a geometric calibration field. The approach focuses on three modules: on-ground processing based on bidirectional filter, overall weighted smoothing and fitting, and evaluation in the geometric calibration field. Our experimental results demonstrate that the proposed on-ground processing method is both robust and feasible, which ensures the reliability of the observation data quality, convergence and stability of the parameter estimation model. In addition, both the Euler angle and quaternion could be used to build a mathematical fitting model, while the orthogonal polynomial fitting model is more suitable for modeling the attitude parameter. Furthermore, compared to the image geometric processing results based on on-board attitude data, the image uncontrolled and relative geometric positioning result accuracy can be increased by about 50%. PMID:27483287

Energy consumption estimation of an OMAP-based Android operating system

NASA Astrophysics Data System (ADS)

González, Gabriel; Juárez, Eduardo; Castro, Juan José; Sanz, César

2011-05-01

System-level energy optimization of battery-powered multimedia embedded systems has recently become a design goal. The poor operational time of multimedia terminals makes computationally demanding applications impractical in real scenarios. For instance, the so-called smart-phones are currently unable to remain in operation longer than several hours. The OMAP3530 processor basically consists of two processing cores, a General Purpose Processor (GPP) and a Digital Signal Processor (DSP). The former, an ARM Cortex-A8 processor, is aimed to run a generic Operating System (OS) while the latter, a DSP core based on the C64x+, has architecture optimized for video processing. The BeagleBoard, a commercial prototyping board based on the OMAP processor, has been used to test the Android Operating System and measure its performance. The board has 128 MB of SDRAM external memory, 256 MB of Flash external memory and several interfaces. Note that the clock frequency of the ARM and DSP OMAP cores is 600 MHz and 430 MHz, respectively. This paper describes the energy consumption estimation of the processes and multimedia applications of an Android v1.6 (Donut) OS on the OMAP3530-Based BeagleBoard. In addition, tools to communicate the two processing cores have been employed. A test-bench to profile the OS resource usage has been developed. As far as the energy estimates concern, the OMAP processor energy consumption model provided by the manufacturer has been used. The model is basically divided in two energy components. The former, the baseline core energy, describes the energy consumption that is independent of any chip activity. The latter, the module active energy, describes the energy consumed by the active modules depending on resource usage.

Performance verification and system integration tests of the pulse shape processor for the soft x-ray spectrometer onboard ASTRO-H

NASA Astrophysics Data System (ADS)

Takeda, Sawako; Tashiro, Makoto S.; Ishisaki, Yoshitaka; Tsujimoto, Masahiro; Seta, Hiromi; Shimoda, Yuya; Yamaguchi, Sunao; Uehara, Sho; Terada, Yukikatsu; Fujimoto, Ryuichi; Mitsuda, Kazuhisa

2014-07-01

The soft X-ray spectrometer (SXS) aboard ASTRO-H is equipped with dedicated digital signal processing units called pulse shape processors (PSPs). The X-ray microcalorimeter system SXS has 36 sensor pixels, which are operated at 50 mK to measure heat input of X-ray photons and realize an energy resolution of 7 eV FWHM in the range 0.3-12.0 keV. Front-end signal processing electronics are used to filter and amplify the electrical pulse output from the sensor and for analog-to-digital conversion. The digitized pulses from the 36 pixels are multiplexed and are sent to the PSP over low-voltage differential signaling lines. Each of two identical PSP units consists of an FPGA board, which assists the hardware logic, and two CPU boards, which assist the onboard software. The FPGA board triggers at every pixel event and stores the triggering information as a pulse waveform in the installed memory. The CPU boards read the event data to evaluate pulse heights by an optimal filtering algorithm. The evaluated X-ray photon data (including the pixel ID, energy, and arrival time information) are transferred to the satellite data recorder along with event quality information. The PSP units have been developed and tested with the engineering model (EM) and the flight model. Utilizing the EM PSP, we successfully verified the entire hardware system and the basic software design of the PSPs, including their communication capability and signal processing performance. In this paper, we show the key metrics of the EM test, such as accuracy and synchronicity of sampling clocks, event grading capability, and resultant energy resolution.

Critical incident stress debriefing (CISD) in a shipping company.

PubMed

Saarni, H; Saari, S; Häkkinen, U

1999-01-01

Critical incident stress debriefing (CISD) is a method used successfully to reduce suffering from stress-related ailments such as insomnia, depression, anger, headaches etc. The resources of the shipping company are very limited and, thus, networking with existing organizations and specialists is necessary to carry out CISD effectively. The present company model has been adopted to take into account various situations and levels of disaster. The model has been adopted at three levels of events:Level 1. Serious accidents on shore, sudden deaths, severe events and threats. Events involving one or only few persons. Level 2. Life-threatening occupational accidents on board ship, suicide of a workmate, sudden death and fire on board ship. Events involving one person or limited group of persons. Level 3. Disasters at sea. Severe events involving all or nearly all persons on board ship. Actions at different levels: Level 1: A leaflet describing CISD, situations where it would be appropriate and where it is available, is given to each sailor. The victim is encouraged to seek CISD from public health care centres, most of which have their own services in Finland. Level 2. Training of about 8 hours is carried out by an experienced crisis psychologist for supervisors and officers on board ship. After the training they are able to identify stressful situations. At each harbour, the shipping company has made agreements with experienced crisis psychologists to act as specialists and contact persons on shore. These nominated psychologists will initiate CISD actions when necessary. If they need extra manpower they will turn to other psychologists. Level 3. In such serious accidents, the company's own resources alone are insufficient to provide effective CISD. All available public and private resources will he needed (health care organizations, Red Cross, Church etc.).

Remaking Governance.

ERIC Educational Resources Information Center

Carver, John

2000-01-01

The Policy Governance model's philosophical foundations lie in Rousseau's social contract, Greenleaf's servant-leadership, and modern management theory. Policy Governance stresses primacy of the owner-representative role; full-board authority; superintendents as chief executive officers; authoritative prescription of "ends," bounded…

Get on Board the Cost Effective Way: A Tech Prep Replication Process.

ERIC Educational Resources Information Center

Moore, Wayne A.; Szul, Linda F.; Rivosecchi, Karen

1997-01-01

The Northwestern Pennsylvania Tech Prep Consortium model for replicating tech prep programs includes these steps: fact finding, local industry analysis, curriculum development, detailed description, marketing strategies, implementation, and program evaluation. (SK)

Airplane upset prevention research needs

DOT National Transportation Integrated Search

2008-08-18

This paper, which concludes the Upset Recovery Session convened and chaired by Dennis : Crider from the National Transportation Safety Board and the first author at the AIAA : Modeling and Simulation Technologies Conference 2008, provides a broad ove...

Deducing Electronic Unit Internal Response During a Vibration Test Using a Lumped Parameter Modeling Approach

NASA Technical Reports Server (NTRS)

Van Dyke, Michael B.

2014-01-01

During random vibration testing of electronic boxes there is often a desire to know the dynamic response of certain internal printed wiring boards (PWBs) for the purpose of monitoring the response of sensitive hardware or for post-test forensic analysis in support of anomaly investigation. Due to restrictions on internally mounted accelerometers for most flight hardware there is usually no means to empirically observe the internal dynamics of the unit, so one must resort to crude and highly uncertain approximations. One common practice is to apply Miles Equation, which does not account for the coupled response of the board in the chassis, resulting in significant over- or under-prediction. This paper explores the application of simple multiple-degree-of-freedom lumped parameter modeling to predict the coupled random vibration response of the PWBs in their fundamental modes of vibration. A simple tool using this approach could be used during or following a random vibration test to interpret vibration test data from a single external chassis measurement to deduce internal board dynamics by means of a rapid correlation analysis. Such a tool might also be useful in early design stages as a supplemental analysis to a more detailed finite element analysis to quickly prototype and analyze the dynamics of various design iterations. After developing the theoretical basis, a lumped parameter modeling approach is applied to an electronic unit for which both external and internal test vibration response measurements are available for direct comparison. Reasonable correlation of the results demonstrates the potential viability of such an approach. Further development of the preliminary approach presented in this paper will involve correlation with detailed finite element models and additional relevant test data.

77 FR 39677 - Performance Review Board Membership

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-05

... ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD Performance Review Board Membership AGENCY: Architectural and Transportation Barriers Compliance Board. ACTION: Notice. SUMMARY: Notice is... Transportation Barriers Compliance Board (Access Board). FOR FURTHER INFORMATION CONTACT: David M. Capozzi...

76 FR 52997 - Public Company Accounting Oversight Board; Order Approving Proposed Board Funding Final Rules for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-24

... Accounting Oversight Board; Order Approving Proposed Board Funding Final Rules for Allocation of the Board's Accounting Support Fee Among Issuers, Brokers, and Dealers, and Other Amendments to the Board's Funding Rules August 18, 2011. I. Introduction On June 21, 2011, the Public Company Accounting Oversight Board (the...

75 FR 11210 - Public Company Accounting Oversight Board; Order Approving Proposed Amendment to Board Rules...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-10

... Accounting Oversight Board; Order Approving Proposed Amendment to Board Rules Relating to Inspections March 4, 2010. I. Introduction On July 2, 2009, the Public Company Accounting Oversight Board (the ``Board'' or...'') relating to the Board's rules governing inspections of registered public accounting firms. Notice of the...

32 CFR 865.4 - Board actions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Board actions. 865.4 Section 865.4 National... PERSONNEL REVIEW BOARDS Air Force Board for Correction of Military Records § 865.4 Board actions. (a) Board... serves as its chair. The panel's actions and decisions constitute the actions and decisions of the Board...

Power converter using near-load output capacitance, direct inductor contact, and/or remote current sense

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coteus, Paul W.; Ferencz, Andrew; Hall, Shawn A.

An apparatus includes a first circuit board including first components including a load, and a second circuit board including second components including switching power devices and an output inductor. Ground and output voltage contacts between the circuit boards are made through soldered or connectorized interfaces. Certain components on the first circuit board and certain components, including the output inductor, on the second circuit board act as a DC-DC voltage converter for the load. An output capacitance for the conversion is on the first circuit board with no board-to-board interface between the output capacitance and the load. The inductance of themore » board-to-board interface functions as part of the output inductor's inductance and not as a parasitic inductance. Sense components for sensing current through the output inductor are located on the first circuit board. Parasitic inductance of the board-to-board interface has less effect on a sense signal provided to a controller.« less

32 CFR 1602.15 - Local board of jurisdiction.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Local board of jurisdiction. 1602.15 Section... DEFINITIONS § 1602.15 Local board of jurisdiction. The local board of jurisdiction is the local board to which... determine his claim or to issue to him an order. His local board and registrant's local board refer to the...

32 CFR 1602.15 - Local board of jurisdiction.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Local board of jurisdiction. 1602.15 Section... DEFINITIONS § 1602.15 Local board of jurisdiction. The local board of jurisdiction is the local board to which... determine his claim or to issue to him an order. His local board and registrant's local board refer to the...

American Indian/Alaska Native Voices in the Model of Institutional Adaptation to Student Diversity

ERIC Educational Resources Information Center

Guillory, Raphael; Wolverton, Mimi; Appleton, Valerie

2008-01-01

Richardson and Skinner (1991) in their Model of Institutional Adaptation to Student Diversity (MIASD) assert that state higher education boards have significant influence on the degree to which institutions respond to student diversity. The purpose of the study (conducted in the 2001-2002 school year) reported in this article was to determine…

Dynamic Paper Constructions for Easier Visualization of Molecular Symmetry

ERIC Educational Resources Information Center

Sein, Lawrence T., Jr.

2010-01-01

A system for construction of simple poster-board models is described. The models dynamically demonstrate the symmetry operations of proper rotation, improper rotation, reflection, and inversion for the chemically important point groups D[subscript 3h], D[subscript 4h], D[subscript 5h], D[subscript 6h], T[subscript d], and O[subscript h]. The…

EPA and California Air Resources Board disapprove Volkswagen’s Proposed Emissions Modification for model year 2012 – 2014 manual transmission diesel Passat vehicles; VW intends to submit revised proposal

EPA Pesticide Factsheets

EPA and CARB approve an emissions modification proposed by Volkswagen (VW) to reduce nitrogen oxides emissions from model year 2009-2014, generation 1, 2.0 liter diesel Jetta, Golf, Beetle, and Audi A3 vehicles.

MODEL SCHOOL DIVISION--A REPORT OF THE BOARD OF EDUCATION, JUNE, 1967.

ERIC Educational Resources Information Center

HANSEN, CARL F.; NICKENS, NORMAN W.

DESCRIBED IN THIS REPORT IS THE MODEL SCHOOL DIVISION (MSD) WHICH SERVES THE INNER-CITY PUBLIC SCHOOLS OF WASHINGTON, D.C. FUNCTIONING AS A SEMI-AUTONOMOUS UNIT WITHIN THE SCHOOL SYSTEM, MSD HAS AS ITS BASIC OBJECTIVES IMPROVING EDUCATIONAL QUALITY, SERVING THE SPECIAL EDUCATIONAL NEEDS OF THE COMMUNITY, STIMULATING SCHOOL-COMMUNITY INVOLVEMENT,…

A Study of Arizona's Teachers of English Language Learners

ERIC Educational Resources Information Center

Rios-Aguilar, Cecilia; Gonzalez Canche, Manuel S.; Moll, Luis C.

2012-01-01

Background/Context: In September 2007, the Arizona State Board of Education adopted the Structured English Immersion (SEI) model proposed by the Arizona English Language Learner (ELL) Task Force.During the 2008-2009 academic year, it required all school districts to implement the SEI model.The SEI program, best known as the 4-hour English Language…

Rethinking High School Principal Compensation Practices: An Analysis of Salaries in South Carolina and Theoretical Models

ERIC Educational Resources Information Center

Newman, Tim A.

2012-01-01

This study described the current state of principal salaries in South Carolina and compared the salaries of similar size schools by specific report card performance and demographic variables. Based on the findings, theoretical models were proposed, and comparisons were made with current salary data. School boards, human resource personnel and…

Model Learner Outcomes for Educational Media and Technology.

ERIC Educational Resources Information Center

Dalbotten, Mary, Ed.

The first of four chapters in this manual provides statements of the Minnesota State Board of Education's values, philosophy, mission, and learner goals, and explains the two purposes for which they were designed: (1) to provide a model for use by communities and school staff; and (2) to serve as a hierarchy for use by Department of Education…

For the Arts To Have Meaning...A Model of Adult Education in Performing Arts Organizations.

ERIC Educational Resources Information Center

Kitinoja, L.; Heimlich, J. E.

A model of adult education appears to function in the outreach programs of three Columbus (Ohio) performing arts organizations. The first tier represents the arts organization's board of trustees, and the second represents the internal administration of the company. Two administrative bodies are arbitrarily labelled as education and marketing,…

12 CFR Appendix D to Part 239 - Subsidiary Holding Company of a Mutual Holding Company Model Bylaws

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 4 2013-01-01 2013-01-01 false Subsidiary Holding Company of a Mutual Holding Company Model Bylaws D Appendix D to Part 239 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MUTUAL HOLDING COMPANIES (REGULATION MM) Pt...

12 CFR Appendix C to Part 239 - Mutual Holding Company Model Bylaws

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 4 2013-01-01 2013-01-01 false Mutual Holding Company Model Bylaws C Appendix C to Part 239 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MUTUAL HOLDING COMPANIES (REGULATION MM) Pt. 239, App. C Appendix C to Part 239...

12 CFR Appendix C to Part 239 - Mutual Holding Company Model Bylaws

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 4 2012-01-01 2012-01-01 false Mutual Holding Company Model Bylaws C Appendix C to Part 239 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MUTUAL HOLDING COMPANIES (REGULATION MM) Pt. 239, App. C Appendix C to Part 239...

12 CFR Appendix B to Part 239 - Subsidiary Holding Company of a Mutual Holding Company Model Charter

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 4 2012-01-01 2012-01-01 false Subsidiary Holding Company of a Mutual Holding Company Model Charter B Appendix B to Part 239 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MUTUAL HOLDING COMPANIES (REGULATION MM) Pt...

12 CFR Appendix B to Part 239 - Subsidiary Holding Company of a Mutual Holding Company Model Charter

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 4 2014-01-01 2014-01-01 false Subsidiary Holding Company of a Mutual Holding Company Model Charter B Appendix B to Part 239 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MUTUAL HOLDING COMPANIES (REGULATION MM) Pt...

12 CFR Appendix A to Part 239 - Mutual Holding Company Model Charter

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 4 2012-01-01 2012-01-01 false Mutual Holding Company Model Charter A Appendix A to Part 239 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MUTUAL HOLDING COMPANIES (REGULATION MM) Pt. 239, App. A Appendix A to Part 239...

12 CFR Appendix C to Part 239 - Mutual Holding Company Model Bylaws

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 4 2014-01-01 2014-01-01 false Mutual Holding Company Model Bylaws C Appendix C to Part 239 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MUTUAL HOLDING COMPANIES (REGULATION MM) Pt. 239, App. C Appendix C to Part 239...

12 CFR Appendix D to Part 239 - Subsidiary Holding Company of a Mutual Holding Company Model Bylaws

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 4 2012-01-01 2012-01-01 false Subsidiary Holding Company of a Mutual Holding Company Model Bylaws D Appendix D to Part 239 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MUTUAL HOLDING COMPANIES (REGULATION MM) Pt...

12 CFR Appendix A to Part 239 - Mutual Holding Company Model Charter

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 4 2014-01-01 2014-01-01 false Mutual Holding Company Model Charter A Appendix A to Part 239 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MUTUAL HOLDING COMPANIES (REGULATION MM) Pt. 239, App. A Appendix A to Part 239...

12 CFR Appendix B to Part 239 - Subsidiary Holding Company of a Mutual Holding Company Model Charter

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 4 2013-01-01 2013-01-01 false Subsidiary Holding Company of a Mutual Holding Company Model Charter B Appendix B to Part 239 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MUTUAL HOLDING COMPANIES (REGULATION MM) Pt...

12 CFR Appendix D to Part 239 - Subsidiary Holding Company of a Mutual Holding Company Model Bylaws

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 4 2014-01-01 2014-01-01 false Subsidiary Holding Company of a Mutual Holding Company Model Bylaws D Appendix D to Part 239 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MUTUAL HOLDING COMPANIES (REGULATION MM) Pt...

An Analysis of Computer-Mediated Communication between Middle School Students and Scientist Role Models: A Pilot Study.

ERIC Educational Resources Information Center

Murfin, Brian

1994-01-01

Reports on a study of the effectiveness of computer-mediated communication (CMC) in providing African American and female middle school students with scientist role models. Quantitative and qualitative data gathered by analyzing messages students and scientists posted on a shared electronic bulletin board showed that CMC could be an effective…

TH-EF-BRA-08: A Novel Technique for Estimating Volumetric Cine MRI (VC-MRI) From Multi-Slice Sparsely Sampled Cine Images Using Motion Modeling and Free Form Deformation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, W; Yin, F; Wang, C

Purpose: To develop a technique to estimate on-board VC-MRI using multi-slice sparsely-sampled cine images, patient prior 4D-MRI, motion-modeling and free-form deformation for real-time 3D target verification of lung radiotherapy. Methods: A previous method has been developed to generate on-board VC-MRI by deforming prior MRI images based on a motion model(MM) extracted from prior 4D-MRI and a single-slice on-board 2D-cine image. In this study, free-form deformation(FD) was introduced to correct for errors in the MM when large anatomical changes exist. Multiple-slice sparsely-sampled on-board 2D-cine images located within the target are used to improve both the estimation accuracy and temporal resolution ofmore » VC-MRI. The on-board 2D-cine MRIs are acquired at 20–30frames/s by sampling only 10% of the k-space on Cartesian grid, with 85% of that taken at the central k-space. The method was evaluated using XCAT(computerized patient model) simulation of lung cancer patients with various anatomical and respirational changes from prior 4D-MRI to onboard volume. The accuracy was evaluated using Volume-Percent-Difference(VPD) and Center-of-Mass-Shift(COMS) of the estimated tumor volume. Effects of region-of-interest(ROI) selection, 2D-cine slice orientation, slice number and slice location on the estimation accuracy were evaluated. Results: VCMRI estimated using 10 sparsely-sampled sagittal 2D-cine MRIs achieved VPD/COMS of 9.07±3.54%/0.45±0.53mm among all scenarios based on estimation with ROI-MM-ROI-FD. The FD optimization improved estimation significantly for scenarios with anatomical changes. Using ROI-FD achieved better estimation than global-FD. Changing the multi-slice orientation to axial, coronal, and axial/sagittal orthogonal reduced the accuracy of VCMRI to VPD/COMS of 19.47±15.74%/1.57±2.54mm, 20.70±9.97%/2.34±0.92mm, and 16.02±13.79%/0.60±0.82mm, respectively. Reducing the number of cines to 8 enhanced temporal resolution of VC-MRI by 25% while maintaining the estimation accuracy. Estimation using slices sampled uniformly through the tumor achieved better accuracy than slices sampled non-uniformly. Conclusions: Preliminary studies showed that it is feasible to generate VC-MRI from multi-slice sparsely-sampled 2D-cine images for real-time 3D-target verification. This work was supported by the National Institutes of Health under Grant No. R01-CA184173 and a research grant from Varian Medical Systems.« less

12 CFR 905.10 - Board of Directors.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., functioning and organization of the Finance Board; (iii) Ensuring effective coordination and communication... and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOUSING FINANCE BOARD ORGANIZATION AND OPERATIONS DESCRIPTION OF ORGANIZATION AND FUNCTIONS General Organization § 905.10 Board of Directors. (a) Board of...

12 CFR 905.10 - Board of Directors.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., functioning and organization of the Finance Board; (iii) Ensuring effective coordination and communication... and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOUSING FINANCE BOARD ORGANIZATION AND OPERATIONS DESCRIPTION OF ORGANIZATION AND FUNCTIONS General Organization § 905.10 Board of Directors. (a) Board of...

Report of the Defense Science Board Task Force on Defense Biometrics

DTIC Science & Technology

2007-03-01

certificates, crypto variables, and encoded biometric indices. The Department of Defense has invested prestige and resources in its Common Access Card (CAC...in turn, could be used to unlock an otherwise secret key or crypto variable which would support the remote authentication. A new key variable...The PSA for biometrics should commission development of appropriate threat model(s) and assign responsibility for maintaining currency of the model

A Proposed Resource Cost Model Grant-in-Aid System in Illinois: Equity Considerations and Other Observations.

ERIC Educational Resources Information Center

Hickrod, G. Alan; Chaudhari, Ramesh B.

This paper evaluates the equity dimensions of a grant-in-aid system based on the Resource Cost Model (RCM), as proposed by the Illinois State Board of Education. The first section is an independent evaluation of the conceptual and legal aspects of the RCM, focusing on both the weaknesses and the strengths of the model. In the second section, an…

TVC actuator model. [for the space shuttle main engine

NASA Technical Reports Server (NTRS)

Baslock, R. W.

1977-01-01

A prototype Space Shuttle Main Engine (SSME) Thrust Vector Control (TVC) Actuator analog model was successfully completed. The prototype, mounted on five printed circuit (PC) boards, was delivered to NASA, checked out and tested using a modular replacement technique on an analog computer. In all cases, the prototype model performed within the recording techniques of the analog computer which is well within the tolerances of the specifications.

The Point of No Return? Interest Groups, School Board Elections and the Sustainment of the Portfolio Management Model in Post-Katrina New Orleans

ERIC Educational Resources Information Center

Welsh, Richard; Hall, Michelle

2018-01-01

Context: Given the growing popularity of the portfolio management model (PMM) as a method of improving education, it is important to examine how these market-based reforms are sustained over time and how the politics of sustaining this model have substantial policy implications. Purpose of Study: The purpose of this article is to examine important…

Review and Implementation Status of Prior Defense Business Board Recommendations

DTIC Science & Technology

2007-04-01

Resource Management • Support unified models for shared services , and be prepared to adjust forward approaches for a Unified Medical Command...models for shared services – including by and between Veterans Affairs and Defense, electronic information exchange, disease treatment and prevention...www.dod.mil/dbb/pdf/DBB- Report-on-the-Military.pdf. • Continue to support unified models for shared services – including by and between Veterans Affairs

Governance - Alignment and Configuration of Business Activities Task Group Report

DTIC Science & Technology

2006-05-01

governance level and the Enterprise Model as a way of ensuring integration at the management and work/execution levels 3. Ensure shared services (i.e...Management Framework o QDR Organizational Model o Secretary of Defense 2006-2008 Priorities o Shared Services Defense Business Board...support for horizontal and vertical organizations • Move “supporting” organizations to shared services model May 2006 "Team Defense" 18 Task Group

Report of the Defense Science Board Task Force on Nuclear Deterrence Skills

DTIC Science & Technology

2008-09-01

entail modeling and simulation capability analogous to that for weapon design. A minimum “national” nuclear weapons effects simulator enterprise...systems programs (design, develop, produce, deploy, and sustain) relies 18 I C HA P TE R 3 upon a variety of management models . For example, the Air...entry vehicle design, modeling and simulation efforts, command and control, launch system infrastructure, intermediate-range missile concepts, advanced

Clean Air Act Second Prospective Report Study Science Advisory Board Review, February 19, 2010

EPA Pesticide Factsheets

The following materials were submitted to the Air Quality Modeling Subcommittee (AQMS) technical subcommittee of the section 812 Council pursuant to their February 19, 2010 review meeting in Washington, D.C.

Thermal-depth matching in dynamic scene based on affine projection and feature registration

NASA Astrophysics Data System (ADS)

Wang, Hongyu; Jia, Tong; Wu, Chengdong; Li, Yongqiang

2018-03-01

This paper aims to study the construction of 3D temperature distribution reconstruction system based on depth and thermal infrared information. Initially, a traditional calibration method cannot be directly used, because the depth and thermal infrared camera is not sensitive to the color calibration board. Therefore, this paper aims to design a depth and thermal infrared camera calibration board to complete the calibration of the depth and thermal infrared camera. Meanwhile a local feature descriptors in thermal and depth images is proposed. The belief propagation matching algorithm is also investigated based on the space affine transformation matching and local feature matching. The 3D temperature distribution model is built based on the matching of 3D point cloud and 2D thermal infrared information. Experimental results show that the method can accurately construct the 3D temperature distribution model, and has strong robustness.

Interactive Design and Development of Real Arm Movements for Application in Rehabilitation

NASA Astrophysics Data System (ADS)

Rosman, Rafidah; Hadi, Muhammad Zaidan Abdul; Abu Bakar, Nurulliyana

2018-03-01

An interactive real arm movements for application in rehabilitation is designed and developed. The aim is to encourage hand paralysis patients performing their physical therapy by introducing games application in replacing conventional hand therapy module and methods. In this project, the accelerometer is used for tracking the orientation of the arm. As the arm moves, the values from x, y and z axis from the accelerometer changes and are being read by the Analog Inputs of the Arduino Board. After being read by the Analog Inputs of the Arduino Board, the 3D model moves as well. Solidworks software was used to modeled the hand in which the data is then transferred to Matlab/Simulink using SimMechanicalLink from Mathworks. Lastly, the sensor glove was programmed to work as a controller of games application in hand rehabilitation thus makes it an enjoyable therapy process.

Factoring consumers' perspectives into policy decisions for nursing competence.

PubMed

Lazarus, Jean B; Lee, N Genell

2006-08-01

Health care delivery competence and accountability have typically been defined from providers' perspectives, rather than those of consumers as purchasers of services. In 1999, in the face of broad public concern about nursing competence the Alabama Board of Nursing developed an accountability model that established consumers at the center of the model and placed accountability for competent nursing practice at all levels of providers including regulatory agencies, health care organizations, educators, and licensees. The Board then authorized two research projects involving first, consumers perceptions on nursing competence and regulation, and second, comparing their perceptions with those of licensees, nurse educators, and organizational leaders (N = 1,127). Comparative data evidenced significant differences between consumers' and other participants' perceptions. This article highlights how policy implications derived from research resulted in regulatory changes for nursing competence. Five years of progress in policy changes made in the interest of public safety are summarized.

Modelling engagement in dementia through behaviour. Contribution for socially interactive robotics.

PubMed

Perugia, Giulia; Diaz Doladeras, Marta; Mallofre, Andreu Catala; Rauterberg, Matthias; Barakova, Emilia

2017-07-01

In this paper, we present a novel tool to measure engagement in people with dementia playing board games and interacting with a social robot, Pleo. We carried out two studies to reach a comprehensive inventory of behaviours accounting for engagement in dementia. The first one is an exploratory study aimed at modelling engagement in cognitive board games. The second one is a longitudinal study to investigate how people with dementia express engagement in cognitive games and in interactions with social robots. We adopted a technique coming from Ethology to mould behaviour, the ethogram. Ethogram is founded on low level behaviours, and allows hierarchical structuring. Herein, we present preliminary results consisting in the description of two ethograms and in their structuring obtained through thematic analysis. Such results show that an underlying structure of engagement exists across activities, and that different activities trigger different behavioural displays of engagement that adhere to such a structure.

SESAME as a Model Project for Other Regions

NASA Astrophysics Data System (ADS)

Winick, Herman

2013-03-01

UNESCO became the umbrella organization for SESAME at its Executive Board 164th session, May 2002. The following comments about SESAME were made by this board: ``a quintessential UNESCO project combining capacity building with vital peace-building through science'' and ``a model project for other regions.'' Now that SESAME is well underway, other regions (e.g.; Africa and Central Asia) should be made aware of this progress, and they should be welcomed to join SESAME as a first step in developing similar projects in their region. Students and scientists from other regions should be encouraged to attend SESAME Users' meeting, schools, workshops, etc. where they can learn about synchrotron radiation sources, beamlines, and science. They should be invited to join SESAME scientists in designing and commissioning accelerators and beamlines, gaining relevant experience for their own projects and helping SESAME in the process. Work supported by DOE Office of Basic Energy Sciences

Information processing requirements for on-board monitoring of automatic landing

NASA Technical Reports Server (NTRS)

Sorensen, J. A.; Karmarkar, J. S.

1977-01-01

A systematic procedure is presented for determining the information processing requirements for on-board monitoring of automatic landing systems. The monitoring system detects landing anomalies through use of appropriate statistical tests. The time-to-correct aircraft perturbations is determined from covariance analyses using a sequence of suitable aircraft/autoland/pilot models. The covariance results are used to establish landing safety and a fault recovery operating envelope via an event outcome tree. This procedure is demonstrated with examples using the NASA Terminal Configured Vehicle (B-737 aircraft). The procedure can also be used to define decision height, assess monitoring implementation requirements, and evaluate alternate autoland configurations.