Science.gov

Sample records for bodies close contacts

  1. EDITORIAL: Close contact Close contact

    NASA Astrophysics Data System (ADS)

    Demming, Anna

    2010-07-01

    The development of scanning probe techniques, such as scanning tunnelling microscopy [1], has often been touted as the catalyst for the surge in activity and progress in nanoscale science and technology. Images of nanoscale structural detail have served as an invaluable investigative resource and continue to fascinate with the fantastical reality of an intricate nether world existing all around us, but hidden from view of the naked eye by a disparity in scale. As is so often the case, the invention of the scanning tunnelling microscope heralded far more than just a useful new apparatus, it demonstrated the scope for exploiting the subtleties of electronic contact. The shrinking of electronic devices has been a driving force for research into molecular electronics, in which an understanding of the nature of electronic contact at junctions is crucial. In response, the number of experimental techniques in molecular electronics has increased rapidly in recent years. Scanning tunnelling microscopes have been used to study electron transfer through molecular films on a conducting substrate, and the need to monitor the contact force of scanning tunnelling electrodes led to the use of atomic force microscopy probes coated in a conducting layer as studied by Cui and colleagues in Arizona [2]. In this issue a collaboration of researchers at Delft University and Leiden University in the Netherlands report a new device architecture for the independent mechanical and electrostatic tuning of nanoscale charge transport, which will enable thorough studies of molecular transport in the future [3]. Scanning probes can also be used to pattern surfaces, such as through spatially-localized Suzuki and Heck reactions in chemical scanning probe lithography. Mechanistic aspects of spatially confined Suzuki and Heck chemistry are also reported in this issue by researchers in Oxford [4]. All these developments in molecular electronics fabrication and characterization provide alternative

  2. SARS Patients and Their Close Contacts

    MedlinePlus

    ... Fact Sheet for SARS Patients and Their Close Contacts Format: Select one PDF [256 KB] Recommend on ... that are not now known. What does "close contact" mean? In the context of SARS, close contact ...

  3. Dynamic simulation of articulated rigid bodies with contact and collision.

    PubMed

    Weinstein, Rachel; Teran, Joseph; Fedkiw, Ron

    2006-01-01

    We propose a novel approach for dynamically simulating articulated rigid bodies undergoing frequent and unpredictable contact and collision. In order to leverage existing algorithms for nonconvex bodies, multiple collisions, large contact groups, stacking, etc., we use maximal rather than generalized coordinates and take an impulse-based approach that allows us to treat articulation, contact, and collision in a unified manner. Traditional constraint handling methods are subject to drift, and we propose a novel prestabilization method that does not require tunable potentially stiff parameters as does Baumgarte stabilization. This differs from poststabilization in that we compute allowable trajectories before moving the rigid bodies to their new positions, instead of correcting them after the fact when it can be difficult to incorporate the effects of contact and collision. A poststabilization technique is used for momentum and angular momentum. Our approach works with any black box method for specifying valid joint constraints and no special considerations are required for arbitrary closed loops or branching. Moreover, our implementation is linear both in the number of bodies and in the number of auxiliary contact and collision constraints, unlike many other methods that are linear in the number of bodies, but not in the number of auxiliary constraints.

  4. Indexing and retrieving motions of characters in close contact.

    PubMed

    Ho, Edmond S L; Komura, Taku

    2009-01-01

    Human motion indexing and retrieval are important for animators due to the need to search for motions in the database which can be blended and concatenated. Most of the previous researches of human motion indexing and retrieval compute the Euclidean distance of joint angles or joint positions. Such approaches are difficult to apply for cases in which multiple characters are closely interacting with each other, as the relationships of the characters are not encoded in the representation. In this research, we propose a topology-based approach to index the motions of two human characters in close contact. We compute and encode how the two bodies are tangled based on the concept of rational tangles. The encoded relationships, which we define as TangleList, are used to determine the similarity of the pairs of postures. Using our method, we can index and retrieve motions such as one person piggy-backing another, one person assisting another in walking, and two persons dancing / wrestling. Our method is useful to manage a motion database of multiple characters. We can also produce motion graph structures of two characters closely interacting with each other by interpolating and concatenating topologically similar postures and motion clips, which are applicable to 3D computer games and computer animation.

  5. Direct-contact closed-loop heat exchanger

    DOEpatents

    Berry, Gregory F.; Minkov, Vladimir; Petrick, Michael

    1984-01-01

    A high temperature heat exchanger with a closed loop and a heat transfer liquid within the loop, the closed loop having a first horizontal channel with inlet and outlet means for providing direct contact of a first fluid at a first temperature with the heat transfer liquid, a second horizontal channel with inlet and outlet means for providing direct contact of a second fluid at a second temperature with the heat transfer liquid, and means for circulating the heat transfer liquid.

  6. Direct-contact closed-loop heat exchanger

    DOEpatents

    Berry, G.F.; Minkov, V.; Petrick, M.

    1981-11-02

    A high temperature heat exchanger is disclosed which has a closed loop and a heat transfer liquid within the loop, the closed loop having a first horizontal channel with inlet and outlet means for providing direct contact of a first fluid at a first temperature with the heat transfer liquid, a second horizontal channel with inlet and outlet means for providing direct contact of a second fluid at a second temperature with the heat transfer liquid, and means for circulating the heat transfer liquid.

  7. The Formation of Contact and Very Close Binaries

    SciTech Connect

    Kisseleva-Eggleton, L; Eggleton, P P

    2007-08-10

    We explore the possibility that all close binaries, i.e. those with periods {approx}< 3 d, including contact (W UMa) binaries, are produced from initially wider binaries (periods of say 10's of days) by the action of a triple companion through the medium of Kozai Cycles with Tidal Friction (KCTF).

  8. High Transmembrane Voltage Raised by Close Contact Initiates Fusion Pore.

    PubMed

    Bu, Bing; Tian, Zhiqi; Li, Dechang; Ji, Baohua

    2016-01-01

    Membrane fusion lies at the heart of neuronal communication but the detailed mechanism of a critical step, fusion pore initiation, remains poorly understood. Here, through atomistic molecular dynamics simulations, a transient pore formation induced by a close contact of two apposed bilayers is firstly reported. Such a close contact gives rise to a high local transmembrane voltage that induces the transient pore formation. Through simulations on two apposed bilayers fixed at a series of given distances, the process in which two bilayers approaching to each other under the pulling force from fusion proteins for membrane fusion was mimicked. Of note, this close contact induced fusion pore formation is contrasted with previous reported electroporation under ad hoc applied external electric field or ionic charge in-balance. We show that the transmembrane voltage increases with the decrease of the distance between the bilayers. Below a critical distance, depending on the lipid composition, the local transmembrane voltage can be sufficiently high to induce the transient pores. The size of these pores is approximately 1~2 nm in diameter, which is large enough to allow passing of neurotransmitters. A resealing of the membrane pores resulting from the neutralization of the transmembrane voltage by ions through the pores was then observed. We also found that the membrane tension can either prolong the lifetime of transient pores or cause them to dilate for full collapse. This result provides a possible mechanism for fusion pore formation and regulation of pathway of fusion process.

  9. High Transmembrane Voltage Raised by Close Contact Initiates Fusion Pore

    PubMed Central

    Bu, Bing; Tian, Zhiqi; Li, Dechang; Ji, Baohua

    2016-01-01

    Membrane fusion lies at the heart of neuronal communication but the detailed mechanism of a critical step, fusion pore initiation, remains poorly understood. Here, through atomistic molecular dynamics simulations, a transient pore formation induced by a close contact of two apposed bilayers is firstly reported. Such a close contact gives rise to a high local transmembrane voltage that induces the transient pore formation. Through simulations on two apposed bilayers fixed at a series of given distances, the process in which two bilayers approaching to each other under the pulling force from fusion proteins for membrane fusion was mimicked. Of note, this close contact induced fusion pore formation is contrasted with previous reported electroporation under ad hoc applied external electric field or ionic charge in-balance. We show that the transmembrane voltage increases with the decrease of the distance between the bilayers. Below a critical distance, depending on the lipid composition, the local transmembrane voltage can be sufficiently high to induce the transient pores. The size of these pores is approximately 1~2 nm in diameter, which is large enough to allow passing of neurotransmitters. A resealing of the membrane pores resulting from the neutralization of the transmembrane voltage by ions through the pores was then observed. We also found that the membrane tension can either prolong the lifetime of transient pores or cause them to dilate for full collapse. This result provides a possible mechanism for fusion pore formation and regulation of pathway of fusion process. PMID:28018169

  10. Evolution of Cool Close Binaries - Approach to Contact

    NASA Astrophysics Data System (ADS)

    Stępień, K.

    2011-06-01

    As a part of a larger project, a set of 27 evolutionary models of cool close binaries was computed under the assumption that their evolution is influenced by the magnetized winds blowing from both components. Short period binaries with the initial periods of 1.5 d, 2.0 d and 2.5 d were considered. For each period three values of 1.3 Msun, 1.1 Msun and 0.9 Msun were taken as the initial masses of the more massive components. The initial masses of the less massive components were adjusted to avoid extreme mass ratios. Here the results of the computations of the first evolutionary phase are presented, which starts from the initial conditions and ends when the more massive component reaches its critical Roche lobe. In all considered cases this phase lasts for several Gyr. For binaries with the higher total mass and/or longer initial periods this time is equal to, or longer than the main sequence life time of the more massive component. For the remaining binaries it amounts to a substantial fraction of this life time. From the statistical analysis of models, the predicted period distribution of detached binaries with periods shorter than 2 d was obtained and compared to the observed distribution from the ASAS data. An excellent agreement was obtained under the assumption that the period distribution in this range is determined solely by magnetic braking (MB), i.e., the mass and angular momentum loss due to the magnetized winds, as considered in the present paper. This result indicates, in particular, that virtually all cool detached binaries with periods of a few tenths of a day, believed to be the immediate progenitors of W UMa-type stars, were formed from young detached systems with periods around 2-3 d. MB is the dominant formation mechanism of cool contact binaries. It operates on the time scale of several Gyr rendering them rather old, with age of 6-10 Gyr. The results of the present analysis will be used as input data to investigate the subsequent evolution of the

  11. Directional close-contact melting in glacier ice

    NASA Astrophysics Data System (ADS)

    Kowalski, Julia; Schüller, Kai

    2015-04-01

    The Saturnian moon Enceladus shows incidence of liquid water underneath a thick ice sheet cover and is thought to be a potential candidate for extraterrestrial life. However, direct exploration of these subglacial aquatic ecosystems is very challenging. Within the scope of the joint research project 'Enceladus Explorer' (EnEx) (consisting of FH Aachen, RWTH Aachen, Bergische Universität Wuppertal, Universität Bremen, TU Braunschweig und Bundeswehr Universität München), initiated by the German Space Agency, a maneuverable close-contact melting probe has been developed. The force-regulated and heater-controlled probe is able to melt against gravity or even on a curved trajectory. Hence, it offers additional degrees of freedom in its melting motion, e.g. for target oriented melting or obstacle avoidance strategies. General feasibility of the concept has been demonstrated in various field tests. However, in order to optimize its design and to adopt it to extraterrestrial missions a simulation model is needed, capable of determining melting velocity and efficiency at given environmental conditions and system configurations. Within this contribution, the physical situation is abstracted into a quasi-stationary mathematical model description, and a numerical solution strategy is developed to compute melting velocity and temperature distribution within the probe and the surrounding ice. We present an inverse solution approach, in which a background velocity field of the ice mimics the melting velocity. The fundamental balance laws are solved with the corresponding melting rate. Following Newton's laws, the resulting force acting on the probe has to balance the contact force exerted by the probe and can hence be used for convergence. We present both, analytical results to a simplified head geometry, as well as results from a simulation model implemented into the open source software Elmer for arbitrary head geometries. The latter can deal with the full 3d situation

  12. Microwave non-contact imaging of subcutaneous human body tissues

    PubMed Central

    Chernokalov, Alexander; Khripkov, Alexander; Cho, Jaegeol; Druchinin, Sergey

    2015-01-01

    A small-size microwave sensor is developed for non-contact imaging of a human body structure in 2D, enabling fitness and health monitoring using mobile devices. A method for human body tissue structure imaging is developed and experimentally validated. Subcutaneous fat tissue reconstruction depth of up to 70 mm and maximum fat thickness measurement error below 2 mm are demonstrated by measurements with a human body phantom and human subjects. Electrically small antennas are developed for integration of the microwave sensor into a mobile device. Usability of the developed microwave sensor for fitness applications, healthcare, and body weight management is demonstrated. PMID:26609415

  13. Microwave non-contact imaging of subcutaneous human body tissues.

    PubMed

    Kletsov, Andrey; Chernokalov, Alexander; Khripkov, Alexander; Cho, Jaegeol; Druchinin, Sergey

    2015-10-01

    A small-size microwave sensor is developed for non-contact imaging of a human body structure in 2D, enabling fitness and health monitoring using mobile devices. A method for human body tissue structure imaging is developed and experimentally validated. Subcutaneous fat tissue reconstruction depth of up to 70 mm and maximum fat thickness measurement error below 2 mm are demonstrated by measurements with a human body phantom and human subjects. Electrically small antennas are developed for integration of the microwave sensor into a mobile device. Usability of the developed microwave sensor for fitness applications, healthcare, and body weight management is demonstrated.

  14. Close binaries in near and shallow contact stages

    NASA Astrophysics Data System (ADS)

    Zhu, L. Y.; Qian, S. B.; Zejda, M.; Mikulášek, Z.

    2013-02-01

    After a detailed investigation of new observations obtained by small telescopes, we found a group of near and shallow contact binaries with decreasing period including BS Vul, MR Com, EP Cep, ES Cep and V369 Cep. BS Vul and V369 Cep are primary-filling near-contact binaries, while MR Com, EP Cep and ES Cep are shallow contact binaries. With their decrease in period, BS Vul and V369 Cep will evolve to the shallow-contact systems with higher mass ratios, just like ES Cep. The period decease of shallow contact binaries could be caused by the combined effect of the thermal relaxation oscillation (TRO) and variable angular momentum loss (AML). This produces contact binaries in oscillating circles that evolve towards the lower mass ratio direction. That means systems resemble ES Cep will evolve to those systems with lower mass ratio, such as MR Com and EP Cep.

  15. Close contact fluctuations: The seeding of signalling domains in the immunological synapse

    NASA Astrophysics Data System (ADS)

    Chattopadhyay, Amit K.; Burroughs, Nigel J.

    2007-02-01

    We analyse the size and density of thermally induced regions of close contact in cell : cell contact interfaces within a harmonic potential approximation, estimating these regions to be below one-tenth of a micron across. Our calculations indicate that as the distance between the close contact threshold depth and the mean membrane-membrane separation increases, the density of close contact patches decreases exponentially while there is only a minimal variation in their mean size. The technique developed can be used to calculate the probability of first crossing in reflection symmetry violating systems.

  16. Should close contacts of returning travellers with typhoid fever be protected by vaccination?

    PubMed

    Kantele, A

    2015-03-17

    Increasing international travel to areas endemic for typhoid fever correlates with increased risk for travellers to contract the disease. At home, the acutely ill/convalescent patients may pose some risk to their close contacts. In Finland an unofficial guideline suggests vaccination for close contacts of patients with acute typhoid fever; in other developed countries, routine typhoid vaccinations are only recommended to contacts of chronic carriers. This paper discusses the possibilities and limitations of prophylactic/post-exposure typhoid vaccination for contacts of patients with acute disease.

  17. Perceived Discrimination and Interracial Contact: Predicting Interracial Closeness among Black and White Americans

    ERIC Educational Resources Information Center

    Tropp, Linda R.

    2007-01-01

    This research examines whether perceptions of discrimination moderate relationships between interracial contact and feelings of interracial closeness among black and white Americans, using survey responses gathered by the National Conference for Community and Justice (2000). Results indicate that the general association between contact and…

  18. Analysis of effects caused by the irregularity of small bodies: the case of contact binaries and dumbbell-shaped bodies

    NASA Astrophysics Data System (ADS)

    Hirabayashi, Masatoshi; Kawaguchi, Junichiro

    Since a few decades ago, varieties of asteroids have been discovered and observed in detail, stimulating scientists' interests. As for the closed-orbit dynamics about these objects, the dynamics around a simple model and an estimated shape obtained by light curve and radar observations have been actively studied. For the simple model, since the dynamics can easily be understood, several model were sug-gested. Chauvineau et al. (1993) numerically studied orbits on the equilateral plane of a highly elongated body, by using a triaxial ellipsoid model, the two-connected-mass model, and the mass-distribution model. Scheeres (1994) considered the closed-orbit dynamics about a uni-formly rotating triaxial ellipsoid. As for the two-mass-rotating system, Prieto-Llanos et al. (1994) investigated the dynamics around an elongated body in the case of the ratio of the gravitational to centripetal force more than 1 and applied to the Mars-Phobos system. On the other hand, using the same model, Hirabayashi et al. (2010) derived the stability condition about collinear equilibrium points for the ratio less than 1, the fast rotating case, applying it to Asteroid 2000EB14. Analyses with the spherical harmonic function (Kaula, 1966) have also been presented. Scheeres et al. (1996) studied closed orbits to Asteroid Castalia, taking into account coefficients up to order 16 obtained by Hudson and Ostro (1994). They pointed out that for the Castalia case C20 and C22 are important factors. Closed orbits about Toutatis, a non-uniformly rotating asteroid, was also analyzed by Scheeres et al. (1998). Also, Scheeres et al.(2000) studied the dynamics in orbit about Asteroid Eros, a target of NEAR mission. Yoshikawa et al. (1997), on the other hand, suggested the orbital stability around an irregularly shaped body in terms of the inclination angle, considering C20 and C22. The paper studies orbital disturbances around an irregular body such as a contact binary body or a dumbbell shaped body and

  19. Dynamics of closed-loop systems containing flexible bodies

    NASA Technical Reports Server (NTRS)

    Tadikonda, Sivakumar S. K.; Singh, Ramendra P.

    1991-01-01

    An important characteristic of flexible multibody systems containing closed-loop topologies is that the component modes used to describe individual bodies will no longer be independent because of loop closure constraints. Thus, the issue of component modal selection becomes even more complicated. In addition, the foreshortening effect that has been studied extensively in the literature in the context of open-loop topologies will also be present in these constraint equations. Simulation results presented demonstrate the effects of modal selection and foreshortening on the dynamic response of closed-loop flexible systems.

  20. Thermal inspection of discontinuities in bodies using contact thermochromic materials

    SciTech Connect

    Oleinik, A.S.

    1988-11-01

    The authors describes a method of thermal inspection of discontinuities in metallic compounds using contact thermochromic materials which can be used in instrument making and electronics. The aim of the work was to increase the sensitivity of the thermal inspection method. This was achieved by recording a new parameter, i.e., the time period from the start of thermal excitation of the inspected body to the start of variation of the color of the thermochromic material. The proposed nondestructive method increases the reliability of inspection and makes it possible to detect the discontinuities with a linear size of 0.1 mm whose depth is at least twice as large as the linear size of the discontinuity.

  1. Orthotic Body-Weight Support Through Underactuated Potential Energy Shaping with Contact Constraints.

    PubMed

    Lv, Ge; Gregg, Robert D

    2015-12-01

    Body-weight support is an effective clinical tool for gait rehabilitation after neurological impairment. Body-weight supported training systems have been developed to help patients regain mobility and confidence during walking, but conventional systems constrain the patient's treatment in clinical environments. We propose that this challenge could be addressed by virtually providing patients with body-weight support through the actuators of a powered orthosis (or exoskeleton) utilizing potential energy shaping control. However, the changing contact conditions and degrees of underactuation encountered during human walking present significant challenges to consistently matching a desired potential energy for the human in closed loop. We therefore introduce a generalized matching condition for shaping Lagrangian systems with holonomic contact constraints. By satisfying this matching condition for four phases of gait, we derive control laws to achieve virtual body-weight support through a powered knee-ankle orthosis. We demonstrate beneficial effects of virtual body-weight support in simulations of a human-like biped model, indicating the potential clinical value of this proposed control approach.

  2. Orthotic Body-Weight Support Through Underactuated Potential Energy Shaping with Contact Constraints

    PubMed Central

    Lv, Ge; Gregg, Robert D.

    2015-01-01

    Body-weight support is an effective clinical tool for gait rehabilitation after neurological impairment. Body-weight supported training systems have been developed to help patients regain mobility and confidence during walking, but conventional systems constrain the patient's treatment in clinical environments. We propose that this challenge could be addressed by virtually providing patients with body-weight support through the actuators of a powered orthosis (or exoskeleton) utilizing potential energy shaping control. However, the changing contact conditions and degrees of underactuation encountered during human walking present significant challenges to consistently matching a desired potential energy for the human in closed loop. We therefore introduce a generalized matching condition for shaping Lagrangian systems with holonomic contact constraints. By satisfying this matching condition for four phases of gait, we derive control laws to achieve virtual body-weight support through a powered knee-ankle orthosis. We demonstrate beneficial effects of virtual body-weight support in simulations of a human-like biped model, indicating the potential clinical value of this proposed control approach. PMID:26900254

  3. Typical fast thermalization processes in closed many-body systems

    NASA Astrophysics Data System (ADS)

    Reimann, Peter

    2016-03-01

    The lack of knowledge about the detailed many-particle motion on the microscopic scale is a key issue in any theoretical description of a macroscopic experiment. For systems at or close to thermal equilibrium, statistical mechanics provides a very successful general framework to cope with this problem. However, far from equilibrium, only very few quantitative and comparably universal results are known. Here a quantum mechanical prediction of this type is derived and verified against various experimental and numerical data from the literature. It quantitatively describes the entire temporal relaxation towards thermal equilibrium for a large class (in a mathematically precisely defined sense) of closed many-body systems, whose initial state may be arbitrarily far from equilibrium.

  4. Typical fast thermalization processes in closed many-body systems

    PubMed Central

    Reimann, Peter

    2016-01-01

    The lack of knowledge about the detailed many-particle motion on the microscopic scale is a key issue in any theoretical description of a macroscopic experiment. For systems at or close to thermal equilibrium, statistical mechanics provides a very successful general framework to cope with this problem. However, far from equilibrium, only very few quantitative and comparably universal results are known. Here a quantum mechanical prediction of this type is derived and verified against various experimental and numerical data from the literature. It quantitatively describes the entire temporal relaxation towards thermal equilibrium for a large class (in a mathematically precisely defined sense) of closed many-body systems, whose initial state may be arbitrarily far from equilibrium. PMID:26926224

  5. Body lice

    MedlinePlus

    ... Body lice are tiny insects (scientific name is Pediculus humanus corporis ) that are spread through close contact ... disease Images Body louse Lice, body with stool (Pediculus humanus) Body louse, female and larvae Head louse ...

  6. Optimal frequency range for medical radar measurements of human heartbeats using body-contact radar.

    PubMed

    Brovoll, Sverre; Aardal, Øyvind; Paichard, Yoann; Berger, Tor; Lande, Tor Sverre; Hamran, Svein-Erik

    2013-01-01

    In this paper the optimal frequency range for heartbeat measurements using body-contact radar is experimentally evaluated. A Body-contact radar senses electromagnetic waves that have penetrated the human body, but the range of frequencies that can be used are limited by the electric properties of the human tissue. The optimal frequency range is an important property needed for the design of body-contact radar systems for heartbeat measurements. In this study heartbeats are measured using three different antennas at discrete frequencies from 0.1 - 10 GHz, and the strength of the received heartbeat signal is calculated. To characterize the antennas, when in contact with the body, two port S-parameters(†) are measured for the antennas using a pork rib as a phantom for the human body. The results shows that frequencies up to 2.5 GHz can be used for heartbeat measurements with body-contact radar.

  7. Selection versus Structure: Explaining Family Type Differences in Contact with Close Kin

    ERIC Educational Resources Information Center

    De Bruycker, Trees

    2008-01-01

    This article focuses on one aspect of family networks, namely, the frequency of contact with close kin for adults living in different traditional and new family types. Two mechanisms are hypothesized to account for the differences. The first focuses on structural factors such as the number and type of persons in the primary family network,…

  8. Two- and three-body contacts in the unitary Bose gas

    NASA Astrophysics Data System (ADS)

    Fletcher, Richard J.; Lopes, Raphael; Man, Jay; Navon, Nir; Smith, Robert P.; Zwierlein, Martin W.; Hadzibabic, Zoran

    2017-01-01

    In many-body systems governed by pairwise contact interactions, a wide range of observables is linked by a single parameter, the two-body contact, which quantifies two-particle correlations. This profound insight has transformed our understanding of strongly interacting Fermi gases. Using Ramsey interferometry, we studied coherent evolution of the resonantly interacting Bose gas, and we show here that it cannot be explained by only pairwise correlations. Our experiments reveal the crucial role of three-body correlations arising from Efimov physics and provide a direct measurement of the associated three-body contact.

  9. On the Importance of Displacement History in Soft-Body Contact Models

    DTIC Science & Technology

    2015-07-10

    On the Importance of Displacement History in Soft-Body Contact Models Jonathan Fleischmann∗, Radu Serban, Dan Negrut Simulation Based Engineering...paramsothy.jayakumar.civ@mail.mil Two approaches are commonly used for handling fric- tional contact within the framework of the Discrete Ele- ment Method (DEM). One...in mutual contact . The second approach, called the Penalty Method (PM), invokes an elasticity argument to pro- duce a frictional contact force that

  10. An epidemiological cluster pattern of dengue outbreak amongst close contacts in Selangor, Peninsular Malaysia.

    PubMed

    Ang, K T; Ruhaini, I; Chua, K B

    2006-08-01

    Dengue fever is major public health problem especially among the highly urbanized states of Malaysia, such as, Selangor and Kuala Lumpur Federal Territory. We report an epidemiological cluster pattern of dengue outbreak in the district of Gombak, Selangor that may mimic other acute febrile illnesses in which the transmission mode is via close contact. This dengue outbreak consisted of two waves; an initial cluster of three cases (including the first deceased, JI) which occurred between 20th and 21st of July, followed by a later larger cluster of 11 cases that occurred between 1st and 8th of August 2005. This epidemiological clustering pattern of acute dengue virus infection among close contacts suggests an intense rate of dengue virus transmission within the vicinity of the first deceased's house.

  11. Is the Colonisation of Staphylococcus aureus in Pets Associated with Their Close Contact with Owners?

    PubMed Central

    Bierowiec, Karolina; Płoneczka-Janeczko, Katarzyna; Rypuła, Krzysztof

    2016-01-01

    In human beings and animals, staphylococci constitute part of the normal microbial population. Staphylococcus aureus could be classified as an opportunistic pathogen because the bacteria are noted in clinically healthy individuals, but when the immune system becomes compromised, they can also cause a wide range of infections. The objective of this study was to test the hypothesis that cats who are in close contact with their owners are at the greatest risk of being colonised with S. aureus. Two groups of cats were investigated: single, pet (domestic) cats that do not have outdoor access; and a local population of feral cats living in urban areas. The prevalence of S. aureus in domestic cats was 19.17%, while it’s prevalence in the feral cat population was only 8.3%; which was statistically significant. Analysis of antibiotic resistance, at the genotypic as well as phenotypic level, showed that S. aureus isolates from pet cats were more likely to harbour antibiotic resistant determinants. The prevalence of methicillin-resistant Staphylococcus aureus (MRSA) in households was 10.21%, while in feral cats it was only 1.4%. In conclusion, this study has revealed a correlation between close contact with humans and a higher risk of the cats being colonised with S. aureus and harbouring the antibiotic resistant determinants. PMID:27227897

  12. RECOMMENDATIONS FOR LIVE VIRAL AND BACTERIAL VACCINES IN IMMUNODEFICIENT PATIENTS AND THEIR CLOSE-CONTACTS

    PubMed Central

    Shearer, William T.; Fleisher, Thomas A.; Buckley, Rebecca H.; Ballas, Zuhair; Ballow, Mark; Blaese, R. Michael; Bonilla, Francisco A.; Conley, Mary Ellen; Charlotte-Cunningham-Rundles; Filipovich, Alexandra H.; Fuleihan, Ramsay; Gelfand, Erwin W.; Hernandez-Trujillo, Vivian; Holland, Steven M.; Hong, Richard; Lederman, Howard M.; Malech, Harry L.; Miles, Stephen; Notarangelo, Luigi D.; Ochs, Hans D.; Orange, Jordan S.; Puck, Jennifer M.; Routes, John M.; Stiehm, E. Richard; Sullivan, Kathleen; Torgerson, Troy; Winkelstein, Jerry

    2014-01-01

    The present uncertainty of which live viral or bacterial vaccines may be given to immune deficient patients and the growing neglect of societal adherence to routine immunizations has prompted the Medical Advisory Committee of the Immune Deficiency Foundation to issue recommendations based upon published literature and the collective experience of the committee members. These recommendations address the concern for immunodeficient patients acquiring infections from healthy individuals who have not been immunized or who are shedding live vaccine-derived viral or bacterial organisms. Such transmission of infectious agents may occur within the hospital, clinic, home, or at any public gathering. Collectively, we define this type transmission as close-contact spread of infectious disease that is particularly relevant in patients with impaired immunity who may develop infection when exposed to individuals carrying vaccine-preventable infectious diseases or who have recently received a live vaccine. Immunodeficient patients who have received therapeutic hematopoietic stem transplantation are also at risk during the time when immune reconstitution is incomplete or while they are on immunosuppressive agents to prevent or treat graft-versus-host disease. This review recommends the general education of what is known about vaccine-preventable or vaccine-derived diseases being spread to immunodeficient patients at risk for close-contact spread of infection, and describes the relative risks for a child with severe immunodeficiency. The review also recommends a balance between the need to protect vulnerable individuals with their social needs to integrate into society, attend school, and benefit from peer education. PMID:24582311

  13. Is the Colonisation of Staphylococcus aureus in Pets Associated with Their Close Contact with Owners?

    PubMed

    Bierowiec, Karolina; Płoneczka-Janeczko, Katarzyna; Rypuła, Krzysztof

    2016-01-01

    In human beings and animals, staphylococci constitute part of the normal microbial population. Staphylococcus aureus could be classified as an opportunistic pathogen because the bacteria are noted in clinically healthy individuals, but when the immune system becomes compromised, they can also cause a wide range of infections. The objective of this study was to test the hypothesis that cats who are in close contact with their owners are at the greatest risk of being colonised with S. aureus. Two groups of cats were investigated: single, pet (domestic) cats that do not have outdoor access; and a local population of feral cats living in urban areas. The prevalence of S. aureus in domestic cats was 19.17%, while it's prevalence in the feral cat population was only 8.3%; which was statistically significant. Analysis of antibiotic resistance, at the genotypic as well as phenotypic level, showed that S. aureus isolates from pet cats were more likely to harbour antibiotic resistant determinants. The prevalence of methicillin-resistant Staphylococcus aureus (MRSA) in households was 10.21%, while in feral cats it was only 1.4%. In conclusion, this study has revealed a correlation between close contact with humans and a higher risk of the cats being colonised with S. aureus and harbouring the antibiotic resistant determinants.

  14. Noncontact Friction and Force Fluctuations between Closely Spaced Bodies

    SciTech Connect

    Stipe, B. C.; Mamin, H. J.; Stowe, T. D.; Kenny, T. W.; Rugar, D.

    2001-08-27

    Noncontact friction between a Au(111) surface and an ultrasensitive gold-coated cantilever was measured as a function of tip-sample spacing, temperature, and bias voltage using observations of cantilever damping and Brownian motion. The importance of the inhomogeneous contact potential is discussed and comparison is made to measurements over dielectric surfaces. Using the fluctuation-dissipation theorem, the force fluctuations are interpreted in terms of near-surface fluctuating electric fields interacting with static surface charge.

  15. The effect of body postures on the distribution of air gap thickness and contact area.

    PubMed

    Mert, Emel; Psikuta, Agnes; Bueno, Marie-Ange; Rossi, René M

    2017-02-01

    The heat and mass transfer in clothing is predominantly dependent on the thickness of air layer and the magnitude of contact area between the body and the garment. The air gap thickness and magnitude of the contact area can be affected by the posture of the human body. Therefore, in this study, the distribution of the air gap and the contact area were investigated for different body postures of a flexible manikin. In addition, the effect of the garment fit (regular and loose) and style (t-shirts, sweatpants, jacket and trousers) were analysed for the interaction between the body postures and the garment properties. A flexible manikin was scanned using a three-dimensional (3D) body scanning technique, and the scans were post-processed in dedicated software. The body posture had a strong effect on the air gap thickness and the contact area for regions where the garment had a certain distance from the body. Furthermore, a mathematical model was proposed to estimate the possible heat transfer coefficient for the observed air layers and their change with posture. The outcome of this study can be used to improve the design of the protective and functional garments and predict their effect on the human body.

  16. The effect of body postures on the distribution of air gap thickness and contact area

    NASA Astrophysics Data System (ADS)

    Mert, Emel; Psikuta, Agnes; Bueno, Marie-Ange; Rossi, René M.

    2017-02-01

    The heat and mass transfer in clothing is predominantly dependent on the thickness of air layer and the magnitude of contact area between the body and the garment. The air gap thickness and magnitude of the contact area can be affected by the posture of the human body. Therefore, in this study, the distribution of the air gap and the contact area were investigated for different body postures of a flexible manikin. In addition, the effect of the garment fit (regular and loose) and style (t-shirts, sweatpants, jacket and trousers) were analysed for the interaction between the body postures and the garment properties. A flexible manikin was scanned using a three-dimensional (3D) body scanning technique, and the scans were post-processed in dedicated software. The body posture had a strong effect on the air gap thickness and the contact area for regions where the garment had a certain distance from the body. Furthermore, a mathematical model was proposed to estimate the possible heat transfer coefficient for the observed air layers and their change with posture. The outcome of this study can be used to improve the design of the protective and functional garments and predict their effect on the human body.

  17. Sub-discretized surface model with application to contact mechanics in multi-body simulation

    SciTech Connect

    Johnson, S; Williams, J

    2008-02-28

    The mechanics of contact between rough and imperfectly spherical adhesive powder grains are often complicated by a variety of factors, including several which vary over sub-grain length scales. These include several traction factors that vary spatially over the surface of the individual grains, including high energy electron and acceptor sites (electrostatic), hydrophobic and hydrophilic sites (electrostatic and capillary), surface energy (general adhesion), geometry (van der Waals and mechanical), and elasto-plastic deformation (mechanical). For mechanical deformation and reaction, coupled motions, such as twisting with bending and sliding, as well as surface roughness add an asymmetry to the contact force which invalidates assumptions for popular models of contact, such as the Hertzian and its derivatives, for the non-adhesive case, and the JKR and DMT models for adhesive contacts. Though several contact laws have been offered to ameliorate these drawbacks, they are often constrained to particular loading paths (most often normal loading) and are relatively complicated for computational implementation. This paper offers a simple and general computational method for augmenting contact law predictions in multi-body simulations through characterization of the contact surfaces using a hierarchically-defined surface sub-discretization. For the case of adhesive contact between powder grains in low stress regimes, this technique can allow a variety of existing contact laws to be resolved across scales, allowing for moments and torques about the contact area as well as normal and tangential tractions to be resolved. This is especially useful for multi-body simulation applications where the modeler desires statistical distributions and calibration for parameters in contact laws commonly used for resolving near-surface contact mechanics. The approach is verified against analytical results for the case of rough, elastic spheres.

  18. Dual Conversations: Body Talk Among Young Women and Their Social Contacts

    PubMed Central

    O’Dougherty, Maureen; Schmitz, Kathryn H.; Hearst, Mary O.; Covelli, Michaela; Kurzer, Mindy S.

    2012-01-01

    In this article, we explore an area little researched within the literature on body dissatisfaction: the content and functions of body talk. We interviewed 60 diverse, college-educated women aged 18 to 30 in the urban United States about how social contacts talked about their bodies. Half the women, and by their reports, half their contacts (N = 295) endorsed some ideal body, most often the thin model. The other half favored a “healthy,” “average” range in body size, shape, and/or appearance. Excepting family members, contacts gave mostly positive comments about women’s bodies or appearance, or made no comments. Many critiqued their own bodies, however, as did nearly half the women participants. We suggest that these women exempted others, but not themselves, from critical body surveillance, rendering contestation of the ideal theoretical. We also suggest that the parallel airing of self-criticism repeatedly circulated through speech, if not through practice, the imperative to regulate one’s own gendered body toward unattainable normativity. PMID:21508251

  19. A simulation study about tracking of micro sized particles close to contact

    NASA Astrophysics Data System (ADS)

    Yücel, Harun; Okumuşoǧlu, Nazmi Turan

    2017-02-01

    The tracking of micro sized colloidal particles which are optically trapped is an important method to gain information about the pair interaction potential between particles suspended in a liquid. To track the particles which are close to contact is difficult because the overlapping of the particle diffraction patterns causes systematic errors in the position detection. Recently, a template based the particle finding algorithm was reported and verified experimentally. Here, we perform simulations in order to determine the precision of that algorithm, as one cannot know the real positions of the particles in the experiment. We generate the particle images by using fitted curve to experimental data. As a result, we found that the proposed algorithm predicts correctly the positions with an isolated reference particle and it has the maximum error about 0.065 pixels (5.5nm) in the particle images.

  20. Pasteurella multocida septicemia caused by close contact with a domestic cat: case report and literature review.

    PubMed

    Kimura, Ryosuke; Hayashi, Yoshinari; Takeuchi, Toyo; Shimizu, Manabu; Iwata, Masaru; Tanahashi, Junji; Ito, Makoto

    2004-08-01

    We report here a case of Pasteurella multocida infection caused by cat exposure presenting with septic shock, sinusitis, and pneumonia. The patient was a febrile 20-year-old woman who had been experiencing disturbed consciousness progressively. She had close contact with a domestic cat and had received some scratches on both arms. A magnetic resonance imaging (MRI) scan of the head showed a high intensity in the paranasal cavity, and a computed tomographic (CT) scan of the chest showed bilateral lung consolidations. The pathogen was identified as P. multocida by the cultures from blood and nasal discharge. She was given intensive antibiotic therapy with ceftriaxone and piperacillin, continuous hemodiafiltration (CHDF) therapy, and anticoagulation therapy. Owing to these therapeutic regimens, the septic shock was successfully treated without complications. We also review the literature on P. multocida septicemia.

  1. Mechanism of the body-centered cubic--hexagonal close-packed phase transition in iron.

    PubMed

    Bassett, W A; Huang, E

    1987-11-06

    The transition from body-centered cubic to hexagonal close-packed phase in iron has been studied in a diamond anvil cell with synchrotron radiation. The hexagonal close-packed phase, when it first appears, has a ratio of lattice parameters that is significantly larger than normal. This is attributed to a displacive mechanism that causes a distortion of the hexagonal close-packed structure in a body-centered cubic matrix. The hexagonal close-packed phase adjacent to a boundary with the body-centered cubic phase is stretched in the c direction and compressed in the a direction when it first forms.

  2. Occult HBV Infection May Be Transmitted through Close Contact and Manifest as an Overt Infection

    PubMed Central

    Hu, Li-Ping; Liu, De-Ping; Chen, Qin-Yan; Harrison, Tim J.; He, Xiang; Wang, Xue-Yan; Li, Hai; Tan, Chao; Yang, Qing-Li; Li, Kai-Wen; Fang, Zhong-Liao

    2015-01-01

    The importance of transmission of occult HBV infection (OBI) via transfusion, organ transplantation and hemodialysis has been widely recognized. However, data regarding the transmission of OBI through close contact remain limited. In this study, serum samples were obtained from a child and his parents. The child had received the standard vaccination regimen at birth and produced protective antibody. Sera were tested for HBV serological markers. Nested PCR assays were used to detect HBV DNA and the amplicons were cloned and their sequences subjected to phylogenetic analysis. The results showed that both parents had occult infections while the child had an overt infection. Twelve, eleven and nine clones, from the father, mother and son, respectively, were sequenced. Serotypes adrq+, ayw1, ayw and ayr were found in the father and ayw1, adw2 and adwq+ in the mother; adrq+ was the only serotype in son. Genotype B, subgenotype C2 and a recombinant were identified in the father and genotype B, subgenotype C5 and three recombinants were found in the mother. Subgenotype C2 was the only genotype identified in the child. A phylogenetic tree showed that all of the child’s sequences and most of the father’s sequences clustered together. However, none of mother’s sequences clustered with those of the child. The surface gene from the child and his father had the same amino acid substitution pattern (T118K, T123N and G145A). We concluded that the father was the source of the son’s HBV infection, suggesting that occult HBV infection may be transmitted through close contact and manifest as an overt infection. PMID:26457811

  3. Occult HBV Infection May Be Transmitted through Close Contact and Manifest as an Overt Infection.

    PubMed

    Hu, Li-Ping; Liu, De-Ping; Chen, Qin-Yan; Harrison, Tim J; He, Xiang; Wang, Xue-Yan; Li, Hai; Tan, Chao; Yang, Qing-Li; Li, Kai-Wen; Fang, Zhong-Liao

    2015-01-01

    The importance of transmission of occult HBV infection (OBI) via transfusion, organ transplantation and hemodialysis has been widely recognized. However, data regarding the transmission of OBI through close contact remain limited. In this study, serum samples were obtained from a child and his parents. The child had received the standard vaccination regimen at birth and produced protective antibody. Sera were tested for HBV serological markers. Nested PCR assays were used to detect HBV DNA and the amplicons were cloned and their sequences subjected to phylogenetic analysis. The results showed that both parents had occult infections while the child had an overt infection. Twelve, eleven and nine clones, from the father, mother and son, respectively, were sequenced. Serotypes adrq+, ayw1, ayw and ayr were found in the father and ayw1, adw2 and adwq+ in the mother; adrq+ was the only serotype in son. Genotype B, subgenotype C2 and a recombinant were identified in the father and genotype B, subgenotype C5 and three recombinants were found in the mother. Subgenotype C2 was the only genotype identified in the child. A phylogenetic tree showed that all of the child's sequences and most of the father's sequences clustered together. However, none of mother's sequences clustered with those of the child. The surface gene from the child and his father had the same amino acid substitution pattern (T118K, T123N and G145A). We concluded that the father was the source of the son's HBV infection, suggesting that occult HBV infection may be transmitted through close contact and manifest as an overt infection.

  4. Numerical Simulations of Close and Contact Binary Systems Having Bipolytropic Equation of State

    NASA Astrophysics Data System (ADS)

    Kadam, Kundan; Clayton, Geoffrey C.; Motl, Patrick M.; Marcello, Dominic; Frank, Juhan

    2017-01-01

    I present the results of the numerical simulations of the mass transfer in close and contact binary systems with both stars having a bipolytropic (composite polytropic) equation of state. The initial binary systems are obtained by a modifying Hachisu’s self-consistent field technique. Both the stars have fully resolved cores with a molecular weight jump at the core-envelope interface. The initial properties of these simulations are chosen such that they satisfy the mass-radius relation, composition and period of a late W-type contact binary system. The simulations are carried out using two different Eulerian hydrocodes, Flow-ER with a fixed cylindrical grid, and Octo-tiger with an AMR capable cartesian grid. The detailed comparison of the simulations suggests an agreement between the results obtained from the two codes at different resolutions. The set of simulations can be treated as a benchmark, enabling us to reliably simulate mass transfer and merger scenarios of binary systems involving bipolytropic components.

  5. DI Hya: A Near-contact Binary with a Close-in Companion

    NASA Astrophysics Data System (ADS)

    Liao, W.-P.; Qian, S.-B.; Li, L.-J.; Zhou, X.; Zhao, E.-G.; Zhang, J.

    2017-03-01

    DI Hya is a short-period eclipsing binary and its classification has been discussed by several authors. New four-color light curves were obtained and have been analyzed together with the data from Manimanis & Niarchos simultaneously using the W–D method. The binary turns out to be a near-contact system where both components are filling or nearly filling their critical Roche lobes. The secondary has a temperature difference of ΔT ≃ ‑2800 K. The orbital period investigation has been ignored so far. All charge-coupled devices (CCD) and pe times of light minima are used for period analysis, showing that a cyclic variation with a short period of 1.46 years and a small semi-amplitude of 0.0034 days and a downward parabolic variation with a rate of \\dot{P}=-2.98(+/- 0.32)× {10}-7 {days} {{yr}}-1. The short period and small semi-amplitude cyclic variations were analyzed for the light-travel time effect via the presence of a close-in tertiary binary with an orbital separation shorter than 1.57(±0.31) au. Orbital properties of this close-in companion should provide valuable information on the formation of this short-period binary and stellar dynamical interaction. The downward parabolic change may be caused by angular momentum loss via an enhanced stellar wind of the more evolved secondary star.

  6. Effects of multi-scale roughness and frictional heating on solid body contact deformation

    NASA Astrophysics Data System (ADS)

    Komvopoulos, Kyriakos

    2008-01-01

    Solid body contact is restricted to a discrete number of randomly distributed microscopic areas resulting from the deformation of interacting surface protrusions (asperities). The deformation mode of these asperity contacts can be elastic, elastic-plastic, or fully plastic, depending on the local surface interference, asperity radius of curvature, coefficient of friction, and mechanical properties of the solid surfaces. Traditionally, the surface topography has been described by statistical models which rely on unrealistic simplifications of the shape, height, and size of the asperities. Such assumptions were avoided in contemporary contact mechanics analyses, which use fractal geometry to accomplish a surface topography description over a wide range of length scales. The main objective of this article is to provide an assessment of the role of multi-scale topography (roughness) and frictional heating in contact deformation of elastic-plastic solid bodies. Contact relationships, derived at the asperity level, which include the mechanical properties of surface layer and substrate medium, layer thickness, local surface interference, and equivalent asperity radius of curvature, are presented for different modes of deformation. These asperity-level relationships and a fractal model of the surface topography are incorporated into a numerical integration scheme to analyze multi-scale thermomechanical contact deformation over the entire real contact area of homogeneous and layered media possessing realistic surface topographies. To cite this article: K. Komvopoulos, C. R. Mecanique 336 (2008).

  7. CHANGE IN KNEE CONTACT FORCE WITH SIMULATED CHANGE IN BODY WEIGHT

    PubMed Central

    Knarr, Brian A.; Higginson, Jill S.; Zeni, Joseph A.

    2015-01-01

    The relationship between obesity, weight gain and progression of knee osteoarthritis is well supported, suggesting that excessive joint loading may be a mechanism responsible for cartilage deterioration. Examining the influence of weight gain on joint compressive forces is difficult, as both muscles and ground reaction forces can have a significant impact on the forces experienced during gait. While previous studies have examined the relationship between body weight and knee forces, these studies have used models that were not validated using experimental data. Therefore, the objective of this study was to evaluate the relationship between changes in body weight and changes in knee joint contact forces for an individual’s gait pattern using musculoskeletal modeling that is validated against known internal compressive forces. Optimal weighting constants were determined for 3 subjects to generate valid predictions of knee contact forces using in vivo data collection with instrumented total knee arthroplasty. A total of five simulations per walking trial were generated for each subject, from 80–120% body weight in 10% increments, resulting in fifty total simulations. The change in peak knee contact force with respect to body weight was found to be constant and subject-specific, predominantly determined by the peak force during the baseline condition at 100% body weight. This relationship may be further altered by any change in kinematics or body mass distribution that may occur as a result of a change in body weight or exercise program. PMID:25760517

  8. Investigation of human body potential measured by a non-contact measuring system.

    PubMed

    Ichikawa, Norimitsu

    2016-12-07

    A human body is occasionally electrified in a room. This charged object will be a source of electrostatic accidents, including the malfunction of electronic equipment. Hence, prevention of these accidents is required. Accidents occasionally occur, even though antistatic clothes and shoes are used. One of the causes for these accidents is that there is a lack of the preventive measures. This situation occurs when using, for example, unconductive wax. In this study, human body potential (voltage) is measured using a non-contact measuring system. An investigation of the human body's voltage when using this system is conducted. The result demonstrates that the voltage of a human body wearing antistatic clothes and shoes or light clothes and slippers exceeds a malfunctioning voltage of a microelectronics device when the body walks on floors. Thus, accidents may occur even if a human body wearing the antistatic clothes walks on flooring. These results will be useful in estimating determination whether electrostatic accidents occur or not.

  9. Effective suckling in relation to naked maternal-infant body contact in the first hour of life: an observation study

    PubMed Central

    2014-01-01

    Background Best practice guidelines to promote breastfeeding suggest that (i) mothers hold their babies in naked body contact immediately after birth, (ii) babies remain undisturbed for at least one hour and (iii) breastfeeding assistance be offered during this period. Few studies have closely observed the implementation of these guidelines in practice. We sought to evaluate these practices on suckling achievement within the first hour after birth. Methods Observations of seventy-eight mother-baby dyads recorded newborn feeding behaviours, the help received by mothers and birthing room practices each minute, for sixty minutes. Results Duration of naked body contact between mothers and their newborn babies varied widely from 1 to 60 minutes, as did commencement of suckling (range = 10 to 60 minutes). Naked maternal-infant body contact immediately after birth, uninterrupted for at least thirty minutes did not predict effective suckling within the first hour of birth. Newborns were four times more likely to sustain deep rhythmical suckling when their chin made contact with their mother’s breast as they approached the nipple (OR 3.8; CI 1.03 - 14) and if their mothers had given birth previously (OR 6.7; CI 1.35 - 33). Infants who had any naso-oropharyngeal suctioning administered at birth were six times less likely to suckle effectively (OR .176; CI .04 - .9). Conclusion Effective suckling within the first hour of life was associated with a collection of practices including infants positioned so their chin can instinctively nudge the underside of their mother’s breast as they approach to grasp the nipple and attach to suckle. The best type of assistance provided in the birthing room that enables newborns to sustain an effective latch was paying attention to newborn feeding behaviours and not administering naso-oropharyngeal suction routinely. PMID:24423381

  10. On some approximations of the resultant contact forces and their applications in rigid body dynamics

    NASA Astrophysics Data System (ADS)

    Kudra, Grzegorz; Szewc, Michał; Wojtunik, Igor; Awrejcewicz, Jan

    2016-10-01

    The work presents the possible applications and effectiveness of certain class of models of the resultant friction force and rolling resistance. The friction models are based on the integral model constructed under assumption of fully developed sliding on the plane contact area of general shape and any pressure distribution. Then the integral model of friction force and moment are approximated based on Padé approximants and their generalizations. These models are expected to be computationally effective in numerical simulations of rigid bodies with frictional contacts, such like billiard balls, Thompson top, the wobble stone and many others. In the present work two different examples of application of the developed contact models are presented and tested: a) a billiard ball rolling and sliding on the plane horizontal table; b) a full ellipsoid of revolution in contact with plane and horizontal base.

  11. Occupant seating anthropometry: body ellipses and contact zones for side-impact protection research

    NASA Astrophysics Data System (ADS)

    Culver, Clyde C.; Viano, David C.

    The study has developed an anthropometric description of seated occupants and determined body regions representing major paths in side-impact crashes. The study has identified five major body ellipses defining the head, shoulder, chest, abdomen and pelvis of seated occupants of various sizes, including the six-year-old child. Body contact zones have been determined for front-seated occupants. These templates provide information for the design of side interiors to improve occupant protection in side-impact crashes by load-transfer and energy-absorption characteristics of biocompatible interiors.

  12. Diamond-shaped body contact for on-state breakdown voltage improvement of SOI LDMOSFET

    NASA Astrophysics Data System (ADS)

    Daghighi, Arash; Hematian, Hadi

    2017-03-01

    In this paper, we report a diamond-shaped body contact (DSBC) for silicon-on-insulator (SOI) LDMOSFET. Several DSBC devices along with conventional body contact (CBC) structures are laid out using 0.35 μm SOI MOSFET foundry process. The DSBC device is designed using the same standard layers as in the CBC structure and the contact layout is adapted to process design rules. Experimental characterization of the CBC and DSBC devices in terms of off-state breakdown voltage (BVoff), on-state breakdown voltage (BVon), on-resistance (Ron) and device foot print showed 19% improvement in BVon compared DSBC device with that of the CBC structure. BVoff and Ron of both of the devices are identical. The device foot print is smaller in DSBC device by 11% compared with that of the CBC structure leading to enhanced "On-resistance × Area" figure of merit where smaller high voltage SOI LDMOSEFT reduces the area and cost of power integrated circuits. In order to explain BVon improvement of DSBC structures, three-dimensional (3-D) device simulation is carried out to clarify the lateral BJT action and breakdown mechanism. It is demonstrated that the number of P+ diffusions in DSBC device can be increased to improve BVon without increasing "On-resistance × Area". The on-state breakdown voltage improvement and area efficiency of the diamond-shaped body contact proposes it as a promising candidate for reliable operation of SOI LDMOSFET.

  13. Statistical analysis of landing contact conditions for three lifting body research vehicles

    NASA Technical Reports Server (NTRS)

    Larson, R. R.

    1972-01-01

    The landing contact conditions for the HL-10, M2-F2/F3, and the X-24A lifting body vehicles are analyzed statistically for 81 landings. The landing contact parameters analyzed are true airspeed, peak normal acceleration at the center of gravity, roll angle, and roll velocity. Ground measurement parameters analyzed are lateral and longitudinal distance from intended touchdown, lateral distance from touchdown to full stop, and rollout distance. The results are presented in the form of histograms for frequency distributions and cumulative frequency distribution probability curves with a Pearson Type 3 curve fit for extrapolation purposes.

  14. Distance of the contact glide in the closing masticatory stroke during mastication of three types of food.

    PubMed

    Rilo, B; Fernández-Formoso, N; Mora, M J; Cadarso-Suárez, C; Santana, U

    2009-08-01

    This study was designed to characterize the distance of the contact glide in the closing masticatory stroke in healthy adult subjects, during chewing of three types of food (crustless bread, chewing gum and peanuts). Mandibular movements (masticatory movements and laterality movements with dental contact) were registered using a gnathograph (MK-6I Diagnostic System) on the right and left side during unilateral chewing of the three food types. Length of dental contact was measured in masticatory cycle, which is defined as where the terminal part of the chewing cycles could be superimposed on the pathways taken by the mandible during lateral excursions with occlusal contacts. The length of dental contact during mastication of chewing gum is 1.46 +/- 1 mm, during chewing of soft bread is 1.38 +/- 0.7 mm and during chewing of peanuts is 1.45 +/- 0.9 mm. There is no significant difference in the lengths of dental contact during mastication of three types of foods that enable direct tooth gliding.

  15. Personal value preferences, group identifications, and cultural practices of Palestinian Israelis working in close contact with Jewish Israelis.

    PubMed

    Tartakovsky, Eugene; Kheit, Ayat Abu

    2016-10-03

    The present study investigates the connection between personal value preferences, group identifications, and cultural practices among Palestinian Israelis working in close contact with the Jewish population in Israel. One hundred twenty-two Palestinian Israelis participated in the study. The participants were employed in different professional positions in the Tel Aviv Metropolitan area and were recruited to the study using the snowball technique. A stronger national identification was associated with a higher preference for the security and conformity values, and a lower preference for the humility values. A stronger ethnic identification was associated with a lower preference for the security, power, and stimulation values. Group identifications mediated the connection between personal value preferences and cultural practices. A longer time working in close contact with the majority group and less frequent visits home were associated with a greater adherence to the majority group's cultural practices but not with adherence to the ethnic group's practices and not with the group identifications.

  16. The mathematical models of electromagnetic field dynamics and heat transfer in closed electrical contacts including Thomson effect

    NASA Astrophysics Data System (ADS)

    Kharin, Stanislav; Sarsengeldin, Merey; Kassabek, Samat

    2016-08-01

    We represent mathematical models of electromagnetic field dynamics and heat transfer in closed symmetric and asymmetric electrical contacts including Thomson effect, which are essentially nonlinear due to the dependence of thermal and electrical conductivities on temperature. Suggested solutions are based on the assumption of identity of equipotentials and isothermal surfaces, which agrees with experimental data and valid for both linear and nonlinear cases. Well known Kohlrausch temperature-potential relation is analytically justified.

  17. Periodic contact between piezoelectric materials and a rigid body with a wavy surface

    NASA Astrophysics Data System (ADS)

    Zhou, Yue-Ting; Kim, Tae-Won

    2015-01-01

    An exact analysis is conducted for periodic, two-dimensional (2D) contact of piezoelectric materials in contact with a rigid body with a wavy surface pressed by uniform stresses at infinity. For three cases of eigenvalue distribution, three harmonic functions automatically satisfying the periodicity conditions are carefully constructed to facilitate the derivation of the solution of the considered problem. The stresses and electric displacements are obtained as infinite series. It is found that for the full contact case, the disturbance stress and electric displacement fields remain only the first harmonic which has the slowest decay in the y-direction. The convergence behaviours of the infinite series are checked, which shows that the external loading p and different positions have a great effect on the convergence behaviours of the infinite series and 400 terms are enough to get accurate solution at each position. Numerical results are presented to justify the validity of the present derivation and show the effect of the external loading on the contact behaviours.

  18. Investigation of human body potential measured by a non-contact measuring system

    PubMed Central

    ICHIKAWA, Norimitsu

    2016-01-01

    A human body is occasionally electrified in a room. This charged object will be a source of electrostatic accidents, including the malfunction of electronic equipment. Hence, prevention of these accidents is required. Accidents occasionally occur, even though antistatic clothes and shoes are used. One of the causes for these accidents is that there is a lack of the preventive measures. This situation occurs when using, for example, unconductive wax. In this study, human body potential (voltage) is measured using a non-contact measuring system. An investigation of the human body’s voltage when using this system is conducted. The result demonstrates that the voltage of a human body wearing antistatic clothes and shoes or light clothes and slippers exceeds a malfunctioning voltage of a microelectronics device when the body walks on floors. Thus, accidents may occur even if a human body wearing the antistatic clothes walks on flooring. These results will be useful in estimating determination whether electrostatic accidents occur or not. PMID:27319403

  19. Close encounters of the third-body kind. [intruding bodies in binary star systems

    NASA Technical Reports Server (NTRS)

    Davies, M. B.; Benz, W.; Hills, J. G.

    1994-01-01

    We simulated encounters involving binaries of two eccentricities: e = 0 (i.e., circular binaries) and e = 0.5. In both cases the binary contained a point mass of 1.4 solar masses (i.e., a neutron star) and a 0.8 solar masses main-sequence star modeled as a polytrope. The semimajor axes of both binaries were set to 60 solar radii (0.28 AU). We considered intruders of three masses: 1.4 solar masses (a neutron star), 0.8 solar masses (a main-sequence star or a higher mass white dwarf), and 0.64 solar masses (a more typical mass white dwarf). Our strategy was to perform a large number (40,000) of encounters using a three-body code, then to rerun a small number of cases with a three-dimensional smoothed particle hydrodynamics (SPH) code to determine the importance of hydrodynamical effects. Using the results of the three-body runs, we computed the exchange across sections, sigma(sub ex). From the results of the SPH runs, we computed the cross sections for clean exchange, denoted by sigma(sub cx); the formation of a triple system, denoted by sigma(sub trp); and the formation of a merged binary with an object formed from the merger of two of the stars left in orbit around the third star, denoted by sigma(sub mb). For encounters between either binary and a 1.4 solar masses neutron star, sigma(sub cx) approx. 0.7 sigma(sub ex) and sigma(sub mb) + sigma(sub trp) approx. 0.3 sigma(sub ex). For encounters between either binary and the 0.8 solar masses main-sequence star, sigma(sub cx) approx. 0.50 sigma(sub ex) and sigma(sub mb) + sigma(sub trp) approx. 1.0 sigma(sub ex). If the main sequence star is replaced by a main-sequence star of the same mass, we have sigma(sub cx) approx. 0.5 sigma(sub ex) and sigma(sub mb) + sigma(sub trp) approx. 1.6 sigma(sub ex). Although the exchange cross section is a sensitive function of intruder mass, we see that the cross section to produce merged binaries is roughly independent of intruder mass. The merged binaries produced have semi

  20. Signature of the universal super Efimov effect: Three-body contact in two-dimensional Fermi gases

    NASA Astrophysics Data System (ADS)

    Zhang, Pengfei; Yu, Zhenhua

    2017-03-01

    A class of universal "three-body" bound states has been recently predicted theoretically for identical fermions interacting at p -wave resonance in two dimensions. This phenomenon is called the super Efimov effect since the binding energies of the states follow a intriguing double exponential scaling. However, experimental resolution of this scaling is expected to meet formidable challenges. In this work, we introduce a thermodynamic quantity, the three-body contact Cθ, to quantify three-body correlations in a two-dimensional gas composed of the resonantly interacting fermions; the contact Cθ is the consequence of the underlying universal super Efimov effect in the many-body context. We show how Cθ affects physical observables such as the radio-frequency spectrum, the momentum distribution, and the atom loss rate. The signature of the elusive super Efimov effect can be pinned down by the detection of the three-body contact Cθ via these observables in the many-body system.

  1. Potential for Non-Contact ACL Injury Between Step-Close-Jump and Hop-Jump Tasks.

    PubMed

    Wang, Li-I; Gu, Chin-Yi; Chen, Wei-Ling; Chang, Mu-San

    2010-01-01

    This study aimed to compare the kinematics and kinetics during the landing of hop-jump and step-close-jump movements in order to provide further inferring that the potential risk of ACL injuries. Eleven elite male volleyball players were recruited to perform hop-jump and step-close-jump tasks. Lower extremity kinematics and ground reaction forces during landing in stop-jump tasks were recorded. Lower extremity kinetics was calculated by using an inverse dynamic process. Step-close-jump tasks demonstrated smaller peak proximal tibia anterior shear forces during the landing phase. In step-close-jump tasks, increasing hip joint angular velocity during initial foot-ground contact decreased peak posterior ground reaction force during the landing phase, which theoretically could reduce the risk of ACL injury. Key pointsThe different landing techniques required for these two stop-jump tasks do not necessarily affect the jump height.Hop-jump decreased the hip joint angular velocity at initial foot contact with ground, which could lead to an increasing peak posterior GRF during the landing phase.Hop-jump decreased hip and knee joint angular flexion displacement during the landing, which could increase the peak vertical loading rate during the landing phase.

  2. Sharing specific "We" autobiographical memories in close relationships: the role of contact frequency.

    PubMed

    Beike, Denise R; Cole, Holly E; Merrick, Carmen R

    2017-04-10

    Sharing memories in conversations with close others is posited to be part of the social function of autobiographical memory. The present research focused on the sharing of a particular type of memory: Specific memories about one-time co-experienced events, which we termed Specific We memories. Two studies with 595 total participants examined the factors that lead to and/or are influenced by the sharing of Specific We memories. In Study 1, participants reported on their most recent conversation. Specific We memories were reportedly discussed most often in conversations with others who were close and with whom the participant had frequent communication. In Study 2, participants were randomly assigned either to increase or to simply record the frequency of communication with a close other (parent). Increases in the frequency of reported sharing of Specific We memories as well as closeness to the parent resulted. Mediation analyses of both studies revealed causal relationships among reported sharing of Specific We memories and closeness. We discuss the relevance of these results for understanding the social function of autobiographical memory.

  3. A flexible multi-body approach for frictional contact in spur gears

    NASA Astrophysics Data System (ADS)

    Lundvall, O.; Strömberg, N.; Klarbring, A.

    2004-12-01

    In the present paper, a large rotational approach for dynamic contact problems with friction is proposed. The approach is used for modelling a spur gear pair with shafts and bearings. The model is obtained by superposing small displacement elasticity on rigid-body motions, and postulating tribological laws on the gear flanks. The finite element method is used to model the elastic properties of the gear pair. Shafts and bearings are represented by linear springs. The tribological laws of the contact interface are Signorini's contact law and Coulomb's law of friction. An important feature of the approach is that the difficulties of impacting mass nodes are avoided. The governing equations of the model are numerically treated by use of the augmented Lagrangian approach. In such manner the geometry of the gear flanks are well represented in the numerical simulations. It is possible to study accurately the consequences of different types of profile modifications as well as flank errors. In this work, the dynamic transmission error is studied. For instance, it turns out that the effect from profile modification is less significant for the transmission error when frictional effects are included.

  4. Incredibly close-A newly identified peroxisome-ER contact site in humans.

    PubMed

    Schuldiner, Maya; Zalckvar, Einat

    2017-02-01

    Peroxisomes are tiny organelles that control important and diverse metabolic processes via their interplay with other organelles, including the endoplasmic reticulum (ER). In this issue, Costello et al. (2017. J. Cell Biol. https://doi.org/10.1083/jcb.201607055) and Hua et al. (2017. J. Cell Biol. https://doi.org/10.1083/jcb.201608128) identify a peroxisome-ER contact site in human cells held together by a tethering complex of VAPA/B (vesicle-associated membrane protein-associated proteins A/B) and ACBD5 (acyl Co-A binding protein 5).

  5. On the identification of multiple close encounters in the planar circular restricted three-body problem

    NASA Astrophysics Data System (ADS)

    Guzzo, M.; Lega, E.

    2013-01-01

    We describe a technique which allows us to numerically detect orbits of the planar circular restricted three-body problem with multiple close encounters with the secondary mass for values of the Jacobi constant C< 3+μ ^2-4μ. We find that these orbits are organized in structures which, on Poincaré surfaces of sections, appear as a hierarchy of lobes. The detection of multiple close encounters has implications in cometary dynamics as well as in the study of asteroids with potential impact risk with the Earth.

  6. SDSS J001641-000925: THE FIRST STABLE RED DWARF CONTACT BINARY WITH A CLOSE-IN STELLAR COMPANION

    SciTech Connect

    Qian, S.-B.; Jiang, L.-Q.; Zhu, L.-Y.; Zhao, E. G.; He, J.-J.; Liao, W.-P.; Wang, J.-J.; Liu, L.; Zhou, X.; Liu, N. P.; Fernández Lajús, E.; Soonthornthum, B.; Rattanasoon, S.; Aukkaravittayapun, S.

    2015-01-10

    SDSS J001641-000925 is the first red dwarf contact binary star with an orbital period of 0.19856 days that is one of the shortest known periods among M-dwarf binary systems. The orbital period was detected to be decreasing rapidly at a rate of P-dot ∼8 s yr{sup −1}. This indicated that SDSS J001641-000925 was undergoing coalescence via a dynamical mass transfer or loss and thus this red dwarf contact binary is dynamically unstable. To understand the properties of the period change, we monitored the binary system photometrically from 2011 September 2 to 2014 October 1 by using several telescopes in the world and 25 eclipse times were determined. It is discovered that the rapid decrease of the orbital period is not true. This is contrary to the prediction that the system is merging driven by rapid mass transfer or loss. Our preliminary analysis suggests that the observed minus calculated (O–C) diagram shows a cyclic oscillation with an amplitude of 0.00255 days and a period of 5.7 yr. The cyclic variation can be explained by the light travel time effect via the presence of a cool stellar companion with a mass of M {sub 3}sin i' ∼ 0.14 M {sub ☉}. The orbital separation between the third body and the central binary is about 2.8 AU. These results reveal that the rarity of red dwarf contact binaries could not be explained by rapidly dynamical destruction and the presence of the third body helps to form the red dwarf contact binary.

  7. Assessment of human body impedance for safety requirements against contact currents for frequencies up to 110 MHz.

    PubMed

    De Santis, Valerio; Beeckman, Pierre A; Lampasi, Domenico Alessandro; Feliziani, Mauro

    2011-02-01

    This paper deals with contact currents that may occur when the human body is in contact with two electrodes at different electrical potentials, e.g., an electrical/electronic device and the floor. Actually, any device must comply not only with electromagnetic compatibility and safety requirements, but also with specific electromagnetic field exposure recommendations in order to prevent health hazards for the occupational and general public population. Since the contact currents depend on the applied voltage and on the human body impedance, this last parameter has been measured for several configurations in a broadband frequency range, from 40 Hz to 110 MHz. From the measurement results, a new equivalent circuit of the human body impedance is derived by using a vector-fitting procedure. This equivalent circuit is very easy and can be adopted for compliance tests against contact currents.

  8. Experimental characterisation of PD SOI MOSFET devices fabricated with diamond-shaped body contact

    NASA Astrophysics Data System (ADS)

    Daghighi, Arash; Osman, Mohamed A.

    2011-06-01

    The design of diamond-shaped body-contacted (DSBC) devices using standard layers in a 0.35 µm silicon-on-insulator (SOI) complementary metal-oxide-semiconductor process is described in this article. The technology is based on a manufacturable partially depleted SOI process targeted for radio frequency applications. The experimental measurements of drain induced barrier lowering for the fabricated DSBC structure showed suppression of floating body effects (FBE) at the promising rate of 24 mV/V. The measurement results confirmed current drive (I DS) improvement by 25% at V DS = 1.5 V and V GS = 1.5 V compared to conventional body-tied-source (BTS) device. A constant and steady output conductance (g DS) in the saturation region was observed for the DSBC structure. The gate trans-conductance (g m) is improved by 34% at V DS = 1.5 V and V GS = 1.5 V compared to conventional BTS device. Three-dimensional device simulation provides insight on FBE suppression and channel current improvement. Experimental results confirmed the area efficiency of the DSBC structure and its excellent current drive performance.

  9. N-body dynamics on closed surfaces: the axioms of mechanics.

    PubMed

    Boatto, Stefanella; Dritschel, David G; Schaefer, Rodrigo G

    2016-08-01

    A major challenge for our understanding of the mathematical basis of particle dynamics is the formulation of N-body and N-vortex dynamics on Riemann surfaces. In this paper, we show how the two problems are, in fact, closely related when considering the role played by the intrinsic geometry of the surface. This enables a straightforward deduction of the dynamics of point masses, using recently derived results for point vortices on general closed differentiable surfaces M endowed with a metric g. We find, generally, that Kepler's Laws do not hold. What is more, even Newton's First Law (the law of inertia) fails on closed surfaces with variable curvature (e.g. the ellipsoid).

  10. N-body dynamics on closed surfaces: the axioms of mechanics

    NASA Astrophysics Data System (ADS)

    Boatto, Stefanella; Dritschel, David G.; Schaefer, Rodrigo G.

    2016-08-01

    A major challenge for our understanding of the mathematical basis of particle dynamics is the formulation of N-body and N-vortex dynamics on Riemann surfaces. In this paper, we show how the two problems are, in fact, closely related when considering the role played by the intrinsic geometry of the surface. This enables a straightforward deduction of the dynamics of point masses, using recently derived results for point vortices on general closed differentiable surfaces M endowed with a metric g. We find, generally, that Kepler's Laws do not hold. What is more, even Newton's First Law (the law of inertia) fails on closed surfaces with variable curvature (e.g. the ellipsoid).

  11. Response of a fluid-immersed microcantilever close to a deformable body

    SciTech Connect

    Clarke, R. J.; Lee, T. C.; Cater, J. E.; Bachtiar, V.; Minton, J.

    2015-03-07

    The importance of hydrodynamics upon the response of a microcantilever immersed in a viscous fluid has been well established [J. E. Sader, J. Appl. Phys. 84, 64 (1998); C. A. Eysden and J. E. Sader, J. Appl. Phys. 101, 044908 (2007)]. It has previously been shown that the presence of a nearby rigid planar surface can significantly alter a microcantilever's non-contact response, through microcantilever–surface hydrodynamic interactions [C. P. Green and J. E. Sader, Phys. Fluids 17, 073102 (2005); C. P. Green and J. E. Sader, J. Appl. Phys. 98, 114913 (2005); R. J. Clarke et al., J. Fluid Mech. 545, 397426 (2005); R. J. Clarke et al., Phys. Rev. Lett. 96, 050801 (2006).]. In cases where the nearby surface is a finite-sized deformable body, such as in noncontact microrheology measurements, we expect to see further changes in the microcantilever's response. Hence, we here compute the thermal spectra of several microcantilevers in the presence of different compliant samples that have the characteristics of soft biological fibres. Our findings demonstrate that the elastohydrodynamic regime can substantially dictate the extent to which the compliance of a given body is evident in the microcantilever's thermal spectra, and suggest that certain nondimensional quantities should lie within particular, ranges for this to be the case. We expect these findings to be of interest in areas such as Atomic Force Microscopy, microsensing, and non-contact microrheology.

  12. Close intramolecular sulfur-oxygen contacts: modified force field parameters for improved conformation generation

    NASA Astrophysics Data System (ADS)

    Lupyan, Dmitry; Abramov, Yuriy A.; Sherman, Woody

    2012-11-01

    The Cambridge Structural Database (CSD) offers an excellent data source to study small molecule conformations and molecular interactions. We have analyzed 130 small molecules from the CSD containing an intramolecular sulfur-oxygen distance less than the sum of their van der Waals (vdW) radii. Close S···O distances are observed in several important medicinal chemistry motifs (e.g. a carbonyl oxygen connected by a carbon or nitrogen linker to a sulfur) and are not treated well with existing parameters in the MMFFs or OPLS_2005 force fields, resulting in suboptimal geometries and energetics. In this work, we develop modified parameters for the OPLS_2005 force field to better treat this specific interaction in order to generate conformations close to those found in the CSD structures. We use a combination of refitting a force field torsional parameter, adding a specific atom pair vdW term, and attenuating the electrostatic interactions to obtain an improvement in the accuracy of geometry minimizations and conformational searches for these molecules. Specifically, in a conformational search 58 % of the cases produced a conformation less than 0.25 Å from the CSD crystal conformation with the modified OPLS force field parameters developed in this work. In contrast, 25 and 37 % produced a conformation less than 0.25 Å with the MMFFs and OPLS_2005 force fields, respectively. As an application of the new parameters, we generated conformations for the tyrosine kinase inhibitor axitinib (trade name Inlyta) that could be correctly repacked into three observed polymorphic structures, which was not possible with conformations generated using MMFFs or OPLS_2005. The improved parameters can be mapped directly onto physical characteristics of the systems that are treated inadequately with the molecular mechanics force fields used in this study and potentially other force fields as well.

  13. Close intramolecular sulfur-oxygen contacts: modified force field parameters for improved conformation generation.

    PubMed

    Lupyan, Dmitry; Abramov, Yuriy A; Sherman, Woody

    2012-11-01

    The Cambridge Structural Database (CSD) offers an excellent data source to study small molecule conformations and molecular interactions. We have analyzed 130 small molecules from the CSD containing an intramolecular sulfur-oxygen distance less than the sum of their van der Waals (vdW) radii. Close S···O distances are observed in several important medicinal chemistry motifs (e.g. a carbonyl oxygen connected by a carbon or nitrogen linker to a sulfur) and are not treated well with existing parameters in the MMFFs or OPLS_2005 force fields, resulting in suboptimal geometries and energetics. In this work, we develop modified parameters for the OPLS_2005 force field to better treat this specific interaction in order to generate conformations close to those found in the CSD structures. We use a combination of refitting a force field torsional parameter, adding a specific atom pair vdW term, and attenuating the electrostatic interactions to obtain an improvement in the accuracy of geometry minimizations and conformational searches for these molecules. Specifically, in a conformational search 58 % of the cases produced a conformation less than 0.25 Å from the CSD crystal conformation with the modified OPLS force field parameters developed in this work. In contrast, 25 and 37 % produced a conformation less than 0.25 Å with the MMFFs and OPLS_2005 force fields, respectively. As an application of the new parameters, we generated conformations for the tyrosine kinase inhibitor axitinib (trade name Inlyta) that could be correctly repacked into three observed polymorphic structures, which was not possible with conformations generated using MMFFs or OPLS_2005. The improved parameters can be mapped directly onto physical characteristics of the systems that are treated inadequately with the molecular mechanics force fields used in this study and potentially other force fields as well.

  14. How close do we live to water? A global analysis of population distance to freshwater bodies.

    PubMed

    Kummu, Matti; de Moel, Hans; Ward, Philip J; Varis, Olli

    2011-01-01

    Traditionally, people have inhabited places with ready access to fresh water. Today, over 50% of the global population lives in urban areas, and water can be directed via tens of kilometres of pipelines. Still, however, a large part of the world's population is directly dependent on access to natural freshwater sources. So how are inhabited places related to the location of freshwater bodies today? We present a high-resolution global analysis of how close present-day populations live to surface freshwater. We aim to increase the understanding of the relationship between inhabited places, distance to surface freshwater bodies, and climatic characteristics in different climate zones and administrative regions. Our results show that over 50% of the world's population lives closer than 3 km to a surface freshwater body, and only 10% of the population lives further than 10 km away. There are, however, remarkable differences between administrative regions and climatic zones. Populations in Australia, Asia, and Europe live closest to water. Although populations in arid zones live furthest away from freshwater bodies in absolute terms, relatively speaking they live closest to water considering the limited number of freshwater bodies in those areas. Population distributions in arid zones show statistically significant relationships with a combination of climatic factors and distance to water, whilst in other zones there is no statistically significant relationship with distance to water. Global studies on development and climate adaptation can benefit from an improved understanding of these relationships between human populations and the distance to fresh water.

  15. Understanding the Physical Aging Behavior of Glassy Polystyrene Layers in Close Contact with Rubbery Domains

    NASA Astrophysics Data System (ADS)

    Roth, Connie; Rauscher, Phil; Pye, Justin; Baglay, Roman

    2014-03-01

    Recent advances in synthesis strategies and processing methods have led to new nanostructured polymer blend and block-copolymer materials containing domain sizes less than 100 nm with glassy and rubbery domains in close proximity. Given the outsized role interfacial perturbations have played in causing large changes in the glass transition temperature Tg and physical aging of ultrathin single-layer films, we are interested in studying how the presence of glassy-rubbery interfaces between neighboring polymer domains may alter the local stability and physical aging of confined glassy layers. Using a polystyrene (PS) / poly(n-butyl methacrylate) (PnBMA) weakly immiscible system with 7 nm interfacial width, we demonstrate how ellipsometry can be used to isolate the physical aging rate of thin PS layers atop rubbery PnBMA layers. Despite a 25-30 K reduction in the average Tg of 84 nm thick PS layers atop PnBMA as measured by fluorescence, we observe no change in the PS aging rate relative to bulk. These results are in contrast with previous works on single-layer polymer films that have found the local aging rate to often be correlated with local Tg changes. This appears not to be the case for glassy PS layers atop rubbery PnBMA suggesting some additional factor is affecting the structural relaxation occurring near the glassy-rubbery interface.

  16. Complete spin and orbital evolution of close-in bodies using a Maxwell viscoelastic rheology

    NASA Astrophysics Data System (ADS)

    Boué, Gwenaël; Correia, Alexandre C. M.; Laskar, Jacques

    2016-11-01

    In this paper, we present a formalism designed to model tidal interaction with a viscoelastic body made of Maxwell material. Our approach remains regular for any spin rate and orientation, and for any orbital configuration including high eccentricities and close encounters. The method is to integrate simultaneously the rotation and the position of the planet as well as its deformation. We provide the equations of motion both in the body frame and in the inertial frame. With this study, we generalize preexisting models to the spatial case and to arbitrary multipole orders using a formalism taken from quantum theory. We also provide the vectorial expression of the secular tidal torque expanded in Fourier series. Applying this model to close-in exoplanets, we observe that if the relaxation time is longer than the revolution period, the phase space of the system is characterized by the presence of several spin-orbit resonances, even in the circular case. As the system evolves, the planet spin can visit different spin-orbit configurations. The obliquity is decreasing along most of these resonances, but we observe a case where the planet tilt is instead growing. These conclusions derived from the secular torque are successfully tested with numerical integrations of the instantaneous equations of motion on HD 80606 b. Our formalism is also well adapted to close-in super-Earths in multiplanet systems which are known to have non-zero mutual inclinations.

  17. Contact transcleral ciliary body photodynamic therapy with verteporfin in pigmented rabbits: effect of repeated treatments.

    PubMed

    Charisis, Spyridon K; Naoumidi, Irene I; Ginis, Harilaos S; Detorakis, Efstathios T; Tsilimbaris, Miltiadis K

    2010-01-01

    We studied the effect on the intraocular pressure (IOP) and the ciliary body (CB) morphology after four consecutive contact transcleral photodynamic treatments of the ciliary body (CB-PDT) with verteporfin in pigmented rabbits. Twenty-two pigmented rabbits underwent CB-PDT (study group), performed once (six rabbits) or repeated for up to four times (16 rabbits). Six additional rabbits received only laser treatment without photosensitizer administration (control group). CB-PDT was performed in one eye in rabbits of the study group, with the fellow eye serving as internal control. Verteporfin dosage was 1 mg kg(-1) as bolus injection and laser settings were 40 mW (600 microm core optical fiber) for 1.5 min per spot, for 10 spots. In repeated CB-PDT, treatments were performed in 4-day intervals. Daily IOP measurements were recorded. Histological studies were performed at selected time points. An IOP reduction, more sustained following repeated treatments, was detected in all treated eyes but not in fellow eyes or in the control group. On the average, the IOP was restored to pretreatment levels 4 days after the last treatment. No serious adverse events were observed and the CB architecture was intact at the end of the experiment. Repeated CB-PDT is safe and results in a short-term reduction of IOP. Induced CB alterations are reversible.

  18. Closed form expressions for sheet resistance and mobility from Van-der-Pauw measurement on 90° symmetric devices with four arbitrary contacts

    NASA Astrophysics Data System (ADS)

    Ausserlechner, Udo

    2016-02-01

    Sheet resistance and Hall mobility are commonly measured by Van der Pauw's method. Closed form expressions are known for four point-sized contacts. Recently, for devices with fourfold rotational symmetry a closed form expression for the sheet resistance was given for contacts of arbitrary size. In this paper we discuss its accuracy, link it to the equivalent circuit diagram of the device, and add another expression that determines the Hall mobility with 0.02% accuracy.

  19. Closed-loop bluff-body wake stabilization via fluidic excitation

    NASA Astrophysics Data System (ADS)

    Stalnov, O.; Fono, I.; Seifert, A.

    2011-06-01

    This article describes an experimental study aimed at stabilizing the wake of a shedding bluff-body by means of closed-loop active flow control at low Reynolds numbers. A D-shaped (6.5 mm thick) cylinder was used to allow a direct wake interaction rather than mixed wake-boundary-layer separation control. The fluidic actuators, installed inside the thin body, were ideally located at the separation locations, i.e., the trailing edges' upper and lower corners. The wake unsteadiness was monitored by a pair of hot wires (HWs), while a single surface-mounted hot-film (HF) sensor was used as a frequency and phase reference for closed-loop control. The HF signal was contaminated by noise. Hence, a technique for real-time tracking of a low signal-to-noise ratio (SNR) signal was necessary. This was achieved by means of a Phase-Locked Loop (PLL), common in communications systems. The closed-loop scheme was based on real-time measurement of the wake-state, using the surface-mounted HF sensor, and control authority imposed by the fluidic actuators. By using opposition control at frequencies close to the natural vortex shedding frequency (VSF), it was possible to significantly reduce the wake unsteadiness. Applying the same approach, but sensing the wake HW signal, rather than the surface-mounted HF signal, as the controller input did not result in wake stabilization. On the contrary, the unsteadiness increased at all the tested conditions. It is expected that a similar approach would work at much higher Reynolds numbers as well, as long as a clearly identifiable and nominally 2D vortex shedding occurs, even when the background flow is fully turbulent.

  20. Diarrhoea in close contacts as a risk factor for childhood haemolytic uraemic syndrome. The CPKDRC co-investigators.

    PubMed Central

    Rowe, P. C.; Orrbine, E.; Lior, H.; Wells, G. A.; McLaine, P. N.

    1993-01-01

    To determine whether the risk factors for childhood haemolytic uraemic syndrome (HUS) are similar to risk factors previously reported for Escherichia coli O 157. H7 gastroenteritis, we conducted a case-control study at eight paediatric hospitals in the summer of 1990. Thirty-four consecutive children with HUS were prospectively enrolled; all had diarrhoea and 88% had laboratory evidence of exposure to verotoxin-producing E. coli (VTEC). The 102 controls were otherwise healthy children with minor acute injuries. Parents of all subjects responded to a questionnaire about each child's exposure to various foods, methods of food preparation, sources of water, travel, and individuals with diarrhoea. Children with HUS were significantly more likely than controls to have had close contact with an individual with diarrhoea in the 2 weeks before the onset of illness (74 v. 29%, P < 0.00001; odds ratio 7.0, 95% CI 2.7-18.5). The onset of diarrhoea in the contacts occurred a median of 6 days (range, 1- > 14 days) before the onset of diarrhoea in the HUS patients. Exposure to undercooked ground meat was not significantly more common in the patients with HUS (15 v. 8%; P = 0.05). These data provide evidence consistent with person-to-person transmission of VTEC in a substantial proportion of episodes of childhood HUS. PMID:8432328

  1. High Cable Forces Deteriorate Pinch Force Control in Voluntary-Closing Body-Powered Prostheses

    PubMed Central

    Abbink, David A.; Kyberd, Peter J.; Plettenburg, Dick H.

    2017-01-01

    Background It is generally asserted that reliable and intuitive control of upper-limb prostheses requires adequate feedback of prosthetic finger positions and pinch forces applied to objects. Body-powered prostheses (BPPs) provide the user with direct proprioceptive feedback. Currently available BPPs often require high cable operation forces, which complicates control of the forces at the terminal device. The aim of this study is to quantify the influence of high cable forces on object manipulation with voluntary-closing prostheses. Method Able-bodied male subjects were fitted with a bypass-prosthesis with low and high cable force settings for the prehensor. Subjects were requested to grasp and transfer a collapsible object as fast as they could without dropping or breaking it. The object had a low and a high breaking force setting. Results Subjects conducted significantly more successful manipulations with the low cable force setting, both for the low (33% more) and high (50%) object’s breaking force. The time to complete the task was not different between settings during successful manipulation trials. Conclusion High cable forces lead to reduced pinch force control during object manipulation. This implies that low cable operation forces should be a key design requirement for voluntary-closing BPPs. PMID:28099454

  2. Finite element modeling for predicting the contact pressure between a foam mattress and the human body in a supine position.

    PubMed

    Lee, Wookjin; Won, Byeong Hee; Cho, Seong Wook

    2017-01-01

    In this paper, we generated finite element (FE) models to predict the contact pressure between a foam mattress and the human body in a supine position. Twenty-year-old males were used for three-dimensional scanning to produce the FE human models, which was composed of skin and muscle tissue. A linear elastic isotropic material model was used for the skin, and the Mooney-Rivlin model was used for the muscle tissue because it can effectively represent the nonlinear behavior of muscle. The contact pressure between the human model and the mattress was predicted by numerical simulation. The human models were validated by comparing the body pressure distribution obtained from the same human subject when he was lying on two different mattress types. The experimental results showed that the slope of the lower part of the mattress caused a decrease in the contact pressure at the heels, and the effect of bone structure was most pronounced in the scapula. After inserting a simple structure to function as the scapula, the contact pressure predicted by the FE human models was consistent with the experimental body pressure distribution for all body parts. These results suggest that the models proposed in this paper will be useful to researchers and designers of products related to the prevention of pressure ulcers.

  3. A fluid-immersed multi-body contact finite element formulation for median nerve stress in the carpal tunnel.

    PubMed

    Ko, Cheolwoong; Brown, Thomas D

    2007-10-01

    Carpal tunnel syndrome (CTS) is among the most important of the family of musculoskeletal disorders caused by chronic peripheral nerve compression. Despite the large body of research in many disciplinary areas aimed at reducing CTS incidence and/or severity, means for objective characterization of the biomechanical insult directly responsible for the disorder have received little attention. In this research, anatomical image-based human carpal tunnel finite element (FE) models were constructed to enable study of median nerve mechanical insult. The formulation included large-deformation multi-body contact between the nerve, the nine digital flexor tendons, and the carpal tunnel boundary. These contact engagements were addressed simultaneously with nerve and tendon fluid-structural interaction (FSI) with the synovial fluid within the carpal tunnel. The effects of pertinent physical parameters on median nerve stress were explored. The results suggest that median nerve stresses due to direct structural contact are typically far higher than those from fluid pressure.

  4. Embryoid Body-Explant Outgrowth Cultivation from Induced Pluripotent Stem Cells in an Automated Closed Platform

    PubMed Central

    Tone, Hiroshi; Yoshioka, Saeko; Akiyama, Hirokazu; Nishimura, Akira; Ichimura, Masaki; Nakatani, Masaru; Kiyono, Tohru

    2016-01-01

    Automation of cell culture would facilitate stable cell expansion with consistent quality. In the present study, feasibility of an automated closed-cell culture system “P 4C S” for an embryoid body- (EB-) explant outgrowth culture was investigated as a model case for explant culture. After placing the induced pluripotent stem cell- (iPSC-) derived EBs into the system, the EBs successfully adhered to the culture surface and the cell outgrowth was clearly observed surrounding the adherent EBs. After confirming the outgrowth, we carried out subculture manipulation, in which the detached cells were simply dispersed by shaking the culture flask, leading to uniform cell distribution. This enabled continuous stable cell expansion, resulting in a cell yield of 3.1 × 107. There was no evidence of bacterial contamination throughout the cell culture experiments. We herewith developed the automated cultivation platform for EB-explant outgrowth cells. PMID:27648449

  5. Touch-free measurement of body temperature using close-up thermography of the ocular surface.

    PubMed

    Vogel, Benjamin; Wagner, Heike; Gmoser, Johanna; Wörner, Anja; Löschberger, Anna; Peters, Laura; Frey, Anna; Hofmann, Ulrich; Frantz, Stefan

    2016-01-01

    In experimental animal research body temperature (BT) is measured for the objective determination of an animals' physiological condition. Invasive, probe-based measurements are stressful and can influence experimental outcome. Alternatively BT can be determined touch-free from the emitted heat of the organism at a single spot using infrared thermometers [1]. To get visual confirmation and find more appropriate surfaces for measurement a hand-held thermal imager was equipped with a self-made, cheap, 3D-printable close-up lens system that reproducibly creates eight-time magnified thermal images and improves sensitivity. This setup was used to establish ocular surface temperature (OST), representing the temperature of the brain-heart axis, as a touch-free alternative for measurement of BT in mice, rats, rabbits and humans.OST measurement after isoflurane exposure and myocardial infarction (MI) experiments in mice revealed high physiological relevance and sensitivity, the possibility to discriminate between MI and sham operations in one hour and even long-term outcome-predictive capabilities of OST after MI. Summarized here we present: •Self-made close-up lens for thermal imaging cameras for eight-time magnification•Establishment of OST for touch-free determination of BT in rodents and humans•Short- and long-term predictive capabilities of OST in experimental MI in mice.

  6. Familiarity breeds contempt: combining proximity loggers and GPS reveals female white-tailed deer (Odocoileus virginianus) avoiding close contact with neighbors.

    PubMed

    Tosa, Marie I; Schauber, Eric M; Nielsen, Clayton K

    2015-01-01

    Social interactions can influence infectious disease dynamics, particularly for directly transmitted pathogens. Therefore, reliable information on contact frequency within and among groups can better inform disease modeling and management. We compared three methods of assessing contact patterns: (1) space-use overlap (volume of interaction [VI]), (2) direct contact rates measured by simultaneous global positioning system (GPS) locations (<10 m apart), and (3) direct contact rates measured by proximity loggers (PLs; 1-m detection) among female white-tailed deer (Odocoileus virginianus). We calculated the PL∶GPS contact ratios to see whether both devices reveal similar contact patterns and thus predict similar pathogen transmission patterns. Contact rates measured by GPS and PLs were similarly high for two within-group dyads (pairs of deer in the same social groups). Dyads representing separate but neighboring groups (high VI) had PL∶GPS contact ratios near zero, whereas dyads further apart (intermediate VI) had higher PL∶GPS contact ratios. Social networks based on PL contacts showed the fewest connected individuals and lowest mean centrality measures; network metrics were intermediate when based on GPS contacts and greatest when based on VI. Thus, the VI network portrayed animals to be more uniformly and strongly connected than did the PL network. We conclude that simultaneous GPS locations, compared with PLs, substantially underestimate the impact of group membership on direct contact rates of female deer and make networks appear more connected. We also present evidence that deer coming within the general vicinity of each other are less likely to come in close contact if they are in neighboring social groups than deer whose home ranges overlap little if at all. Combined, these results provide evidence that direct transmission of disease agents among female and juvenile white-tailed deer is likely to be constrained both spatially and by social structure, more

  7. Contact-free determination of human body segment parameters by means of videometric image processing of an anthropomorphic body model

    NASA Astrophysics Data System (ADS)

    Hatze, Herbert; Baca, Arnold

    1993-01-01

    The development of noninvasive techniques for the determination of biomechanical body segment parameters (volumes, masses, the three principal moments of inertia, the three local coordinates of the segmental mass centers, etc.) receives increasing attention from the medical sciences (e,.g., orthopaedic gait analysis), bioengineering, sport biomechanics, and the various space programs. In the present paper, a novel method is presented for determining body segment parameters rapidly and accurately. It is based on the video-image processing of four different body configurations and a finite mass-element human body model. The four video images of the subject in question are recorded against a black background, thus permitting the application of shape recognition procedures incorporating edge detection and calibration algorithms. In this way, a total of 181 object space dimensions of the subject's body segments can be reconstructed and used as anthropometric input data for the mathematical finite mass- element body model. The latter comprises 17 segments (abdomino-thoracic, head-neck, shoulders, upper arms, forearms, hands, abdomino-pelvic, thighs, lower legs, feet) and enables the user to compute all the required segment parameters for each of the 17 segments by means of the associated computer program. The hardware requirements are an IBM- compatible PC (1 MB memory) operating under MS-DOS or PC-DOS (Version 3.1 onwards) and incorporating a VGA-board with a feature connector for connecting it to a super video windows framegrabber board for which there must be available a 16-bit large slot. In addition, a VGA-monitor (50 - 70 Hz, horizontal scan rate at least 31.5 kHz), a common video camera and recorder, and a simple rectangular calibration frame are required. The advantage of the new method lies in its ease of application, its comparatively high accuracy, and in the rapid availability of the body segment parameters, which is particularly useful in clinical practice

  8. The spindle pole bodies facilitate nuclear envelope division during closed mitosis in fission yeast.

    PubMed

    Zheng, Liling; Schwartz, Cindi; Magidson, Valentin; Khodjakov, Alexey; Oliferenko, Snezhana

    2007-07-01

    Many organisms divide chromosomes within the confines of the nuclear envelope (NE) in a process known as closed mitosis. Thus, they must ensure coordination between segregation of the genetic material and division of the NE itself. Although many years of work have led to a reasonably clear understanding of mitotic spindle function in chromosome segregation, the NE division mechanism remains obscure. Here, we show that fission yeast cells overexpressing the transforming acid coiled coil (TACC)-related protein, Mia1p/Alp7p, failed to separate the spindle pole bodies (SPBs) at the onset of mitosis, but could assemble acentrosomal bipolar and antiparallel spindle structures. Most of these cells arrested in anaphase with fully extended spindles and nonsegregated chromosomes. Spindle poles that lacked the SPBs did not lead the division of the NE during spindle elongation, but deformed it, trapping the chromosomes within. When the SPBs were severed by laser microsurgery in wild-type cells, we observed analogous deformations of the NE by elongating spindle remnants, resulting in NE division failure. Analysis of dis1Delta cells that elongate spindles despite unattached kinetochores indicated that the SPBs were required for maintaining nuclear shape at anaphase onset. Strikingly, when the NE was disassembled by utilizing a temperature-sensitive allele of the Ran GEF, Pim1p, the abnormal spindles induced by Mia1p overexpression were capable of segregating sister chromatids to daughter cells, suggesting that the failure to divide the NE prevents chromosome partitioning. Our results imply that the SPBs preclude deformation of the NE during spindle elongation and thus serve as specialized structures enabling nuclear division during closed mitosis in fission yeast.

  9. A blended wing body airplane with a close-coupled, tilting tail

    NASA Astrophysics Data System (ADS)

    Nasir, R. E. M.; Mazlan, N. S. C.; Ali, Z. M.; Wisnoe, W.; Kuntjoro, W.

    2016-10-01

    This paper highlights a novel approach to stabilizing and controlling pitch and yaw motion via a set of horizontal tail that can act as elevator and rudder. The tail is incorporated into a new design of blended wing body (BWB) aircraft, known as Baseline-V, located just aft of the trailing edge of its inboard wing. The proposed close-coupled tail is equipped with elevators that deflect in unison, and can tilt - an unusual means of tilting where if starboard side is tilted downward at k degree, and then the portside must be tilted upward at k degree too. A wind tunnel experiment is conducted to investigate aerodynamics and static stability of Baseline-V BWB aircraft. The model is being tested at actual flight speed of 15 m/s (54 km/h) with varying angle of attack for five elevator angle cases at zero tilt angle and varying sideslip angle for four tilt angle cases at one fixed elevator angle. The result shows that the aircraft's highest lift-to-drag ratio is 32. It is also found that Baseline-V is statically stable in pitch and yaw but has no clear indication in terms of roll stability.

  10. Clonal Differences between Non-Typhoidal Salmonella (NTS) Recovered from Children and Animals Living in Close Contact in The Gambia

    PubMed Central

    Dione, Michel M.; Ikumapayi, Usman N.; Saha, Debasish; Mohammed, Nuredin I.; Geerts, Stanny; Ieven, Margareta; Adegbola, Richard A.; Antonio, Martin

    2011-01-01

    Background Non-Typhoidal Salmonella (NTS) is an important cause of invasive bacterial disease and associated with mortality in Africa. However, little is known about the environmental reservoirs and predominant modes of transmission. Our study aimed to study the role of domestic animals in the transmission of NTS to humans in rural area of The Gambia. Methodology Human NTS isolates were obtained through an active population-based case-control surveillance study designated to determine the aetiology and epidemiology of enteric infections covering 27,567 Gambian children less than five years of age in the surveillance area. Fourteen children infected with NTS were traced back to their family compounds and anal swabs collected from 210 domestic animals present in their households. Identified NTSs were serotyped and genotyped by multi-locus sequencing typing. Principal Findings NTS was identified from 21/210 animal sources in the households of the 14 infected children. Chickens carried NTS more frequently than sheep and goats; 66.6%, 28.6% and 4.8% respectively. The most common NTS serovars were S. Colindale in humans (21.42%) and S. Poona in animals (14.28%). MLST on the 35 NTS revealed four new alleles and 24 sequence types (ST) of which 18 (75%) STs were novel. There was no overlap in serovars or genotypes of NTS recovered from humans or animal sources in the same household. Conclusion Our results do not support the hypothesis that humans and animals in close contact in the same household carry genotypically similar Salmonella serovars. These findings form an important baseline for future studies of transmission of NTS in humans and animals in Africa. PMID:21655353

  11. Fingertip contact influences human postural control

    NASA Technical Reports Server (NTRS)

    Jeka, J. J.; Lackner, J. R.

    1994-01-01

    Touch and pressure stimulation of the body surface can strongly influence apparent body orientation, as well as the maintenance of upright posture during quiet stance. In the present study, we investigated the relationship between postural sway and contact forces at the fingertip while subjects touched a rigid metal bar. Subjects were tested in the tandem Romberg stance with eyes open or closed under three conditions of fingertip contact: no contact, touch contact (< 0.98 N of force), and force contact (as much force as desired). Touch contact was as effective as force contact or sight of the surroundings in reducing postural sway when compared to the no contact, eyes closed condition. Body sway and fingertip forces were essentially in phase with force contact, suggesting that fingertip contact forces are physically counteracting body sway. Time delays between body sway and fingertip forces were much larger with light touch contact, suggesting that the fingertip is providing information that allows anticipatory innervation of musculature to reduce body sway. The results are related to observations on precision grip as well as the somatosensory, proprioceptive, and motor mechanisms involved in the reduction of body sway.

  12. Computational investigation of the time-dependent contact behaviour of the human tibiofemoral joint under body weight

    PubMed Central

    Jin, Zhongmin; Wilcox, Ruth; Fisher, John

    2014-01-01

    The knee joint is one of the most common sites for osteoarthritis, the onset and progression of which are believed to relate to the mechanical environment of cartilage. To understand this environment, it is necessary to take into account the complex biphasic contact interactions of the cartilage and menisci. In this study, the time-dependent contact behaviour of an intact and a meniscectomized human tibiofemoral joint was characterized under body weight using a computational model. Good agreement in the contact area and femoral displacement under static loads were found between model predictions of this study and published experimental measurements. The time-dependent results indicated that as loading time progressed, the contact area and femoral vertical displacement of both intact and meniscectomized joints increased. More load was transferred to the cartilage–cartilage interface over time. However, the portions of load borne by the lateral and medial compartments did not greatly vary with time. Additionally, during the whole simulation period, the maximum compressive stress in the meniscectomized joint was higher than that in the intact joint. The fluid pressure in the intact and meniscectomized joints remained remarkably high at the condyle centres, but the fluid pressure at the cartilage–meniscus interface decreased faster than that at the condyle centres as loading time progressed. The above findings provide further insights into the mechanical environment of the cartilage and meniscus within the human knee joint. PMID:25500864

  13. Influences of heterogeneous native contact energy and many-body interactions on the prediction of protein folding mechanisms.

    PubMed

    Zhang, Zhuqing; Ouyang, Yanhua; Chen, Tao

    2016-11-16

    Since single-point mutant perturbation has been used to probe protein folding mechanisms in experiments, the ϕ-value has become a critical parameter to infer the transition state (TS) for two-state proteins. Experimentally, large scale analysis has shown a nearly single uniform ϕ-value with normally distributed error from 24 different proteins; moreover, in zero stability conditions, the intrinsic variable ϕ(0) is around 0.36. To explore how and to what extent theoretical models can capture experimental phenomena, we here use structure-based explicit chain coarse-grained models to investigate the influence of single-point mutant perturbation on protein folding for single domain two-state proteins. Our results indicate that uniform, additive contact energetic interactions cannot predict experimental Brønsted plots well. Those points deviate largely from the main data sets in Brønsted plots, are mostly hydrophobic, and are located in N- and C-terminal contacting regions. Heterogenous contact energy, which is dependent on sequence separation, can narrow the point dispersion in a Brønsted plot. Moreover, we demonstrate that combining many-body interactions with heterogeneous native contact energy can present mean ϕ-values consistent with experimental findings, with a comparable distributed error. This indicates that for more accurate elucidation of protein folding mechanisms by residue-level structure-based models, these elements should be considered.

  14. Resource partitioning or reproductive isolation: the ecological role of body size differences among closely related species in sympatry.

    PubMed

    Okuzaki, Yutaka; Takami, Yasuoki; Sota, Teiji

    2010-03-01

    1. Body size differences among coexisting related species are common, but the actual effect of these differences in mitigating interspecific interactions, such as resource competition and reproductive interference, is poorly understood. 2. Local assemblages of the ground beetle genus Carabus (subgenus Ohomopterus) typically consist of two or more species of varying sizes. Through foraging and mating experiments using four Ohomopterus species in parapatry and sympatry, we examined whether interspecific body size differences are effective in partitioning food resources or reducing reproductive interference. 3. Because larval Ohomopterus feed exclusively on earthworms, body size differences may be related to partitioning earthworms of different sizes. However, larvae did not exhibit differences in selectivity or attack success on earthworms of different sizes based on larval body size, indicating little possibility of partitioning food by body size. 4. In contrast, interspecific mating behaviours, such as mate recognition, mounting, and copulation, were hindered when body size differences were large; copulation was frequently accomplished between parapatric species with smaller body size differences. 5. These results suggest that body size differences between species effectively reduce reproductive interference, rather than resource competition. Although body size differences in coexisting closely related species have been considered to function in resource partitioning, they may function primarily in reproductive isolation and thereby facilitate coexistence of species.

  15. Soldier-relevant body borne loads increase knee joint contact force during a run-to-stop maneuver.

    PubMed

    Ramsay, John W; Hancock, Clifford L; O'Donovan, Meghan P; Brown, Tyler N

    2016-12-08

    The purpose of this study was to understand the effects of load carriage on human performance, specifically during a run-to-stop (RTS) task. Using OpenSim analysis tools, knee joint contact force, grounds reaction force, leg stiffness and lower extremity joint angles and moments were determined for nine male military personnel performing a RTS under three load configurations (light, ~6kg, medium, ~20kg, and heavy, ~40kg). Subject-based means for each biomechanical variable were submitted to repeated measures ANOVA to test the effects of load. During the RTS, body borne load significantly increased peak knee joint contact force by 1.2 BW (p<0.001) and peak vertical (p<0.001) and anterior-posterior (p=0.002) ground reaction forces by 0.6 BW and 0.3 BW, respectively. Body borne load also had a significant effect on hip (p=0.026) posture with the medium load and knee (p=0.046) posture with the heavy load. With the heavy load, participants exhibited a substantial, albeit non-significant increase in leg stiffness (p=0.073 and d=0.615). Increases in joint contact force exhibited during the RTS were primarily due to greater GRFs that impact the soldier with each incremental addition of body borne load. The stiff leg, extended knee and large braking force the soldiers exhibited with the heavy load suggests their injury risk may be greatest with that specific load configuration. Further work is needed to determine if the biomechanical profile exhibited with the heavy load configuration translates to unsafe shear forces at the knee joint and consequently, a higher likelihood of injury.

  16. Experimental Analysis of Displacements and Shears at the Surface on Contact between Two Loaded Bodies,

    DTIC Science & Technology

    1980-07-01

    various contact angles and friction coefficients are piven. V • • P’" k, gZ4-* : , - 4.. 30. T. L. Chen and A. J. Durelli, "Stress Field in a Sphere...The concept of " coefficient of efficiency" is introduced to evaluate the degree of optimization. An ideal design of the inside boundary of a tube...efficiency coefficient is increased from 0.59 to 0.95. Tests with a brittle material show an increase in strength of 20Z. An ideal design of the boundary of

  17. Age-congruency and contact effects in body expression recognition from point-light displays (PLD)

    PubMed Central

    Hermens, Frouke; Willmott, Alexander P.

    2016-01-01

    Recognition of older people’s body expressions is a crucial social skill. We here investigate how age, not just of the observer, but also of the observed individual, affects this skill. Age may influence the ability to recognize other people’s body expressions by changes in one’s own ability to perform certain action over the life-span (i.e., an own-age bias may occur, with best recognition for one’s own age). Whole body point light displays of children, young adults and older adults (>70 years) expressing six different emotions were presented to observers of the same three age-groups. Across two variations of the paradigm, no evidence for the predicted own-age bias (a cross-over interaction between one’s own age and the observed person’s age) was found. Instead, experience effects were found with children better recognizing older actors’ expressions of ‘active emotions,’ such as anger and happiness with greater exposure in daily life. Together, the findings suggest that age-related changes in one own’s mobility only influences body expression categorization in young children who interact frequently with older adults. PMID:27994986

  18. Rolling-element bearings. [contact sliding friction study of solid bodies

    NASA Technical Reports Server (NTRS)

    Anderson, W. J.

    1980-01-01

    In contrast to hydrodynamic bearings, which depend for low-friction characteristics on a fluid film between the journal and the bearing surfaces, roller-element bearings employ a number of balls or rollers that roll in an annular space. The paper briefly outlines the advantages and disadvantages of roller-element bearings as compared to hydrodynamic bearings. The discussion covers bearing types, rolling friction, friction losses in rolling bearings, contact stresses, deformations, kinematics (normal and high speeds), bearing dynamics including elastohydrodynamics, load distribution, lubrication (grease, solid oil, oil-air mist), specific dynamic capacity and life, specific static capacity, and fatigue or wearout (elastohydrodynamics, wear). Rolling bearing wear factor as a function of operating environment is plotted and discussed.

  19. Open-cycle magnetohydrodynamic power plant based upon direct-contact closed-loop high-temperature heat exchanger

    DOEpatents

    Berry, Gregory F.; Minkov, Vladimir; Petrick, Michael

    1988-01-05

    A magnetohydrodynamic (MHD) power generating system in which ionized combustion gases with slag and seed are discharged from an MHD combustor and pressurized high temperature inlet air is introduced into the combustor for supporting fuel combustion at high temperatures necessary to ionize the combustion gases, and including a heat exchanger in the form of a continuous loop with a circulating heat transfer liquid such as copper oxide. The heat exchanger has an upper horizontal channel for providing direct contact between the heat transfer liquid and the combustion gases to cool the gases and condense the slag which thereupon floats on the heat transfer liquid and can be removed from the channel, and a lower horizontal channel for providing direct contact between the heat transfer liquid and pressurized air for preheating the inlet air. The system further includes a seed separator downstream of the heat exchanger.

  20. Open-cycle magnetohydrodynamic power plant based upon direct-contact closed-loop high-temperature heat exchanger

    DOEpatents

    Berry, Gregory F.; Minkov, Vladimir; Petrick, Michael

    1988-01-01

    A magnetohydrodynamic (MHD) power generating system in which ionized combustion gases with slag and seed are discharged from an MHD combustor and pressurized high temperature inlet air is introduced into the combustor for supporting fuel combustion at high temperatures necessary to ionize the combustion gases, and including a heat exchanger in the form of a continuous loop with a circulating heat transfer liquid such as copper oxide. The heat exchanger has an upper horizontal channel for providing direct contact between the heat transfer liquid and the combustion gases to cool the gases and condense the slag which thereupon floats on the heat transfer liquid and can be removed from the channel, and a lower horizontal channel for providing direct contact between the heat transfer liquid and pressurized air for preheating the inlet air. The system further includes a seed separator downstream of the heat exchanger.

  1. Open-cycle magnetohydrodynamic power plant based upon direct-contact closed-loop high-temperature heat exchanger

    DOEpatents

    Berry, G.F.; Minkov, V.; Petrick, M.

    1981-11-02

    A magnetohydrodynamic (MHD) power generating system is described in which ionized combustion gases with slag and seed are discharged from an MHD combustor and pressurized high temperature inlet air is introduced into the combustor for supporting fuel combustion at high temperatures necessary to ionize the combustion gases, and including a heat exchanger in the form of a continuous loop with a circulating heat transfer liquid such as copper oxide. The heat exchanger has an upper horizontal channel for providing direct contact between the heat transfer liquid and the combustion gases to cool the gases and condense the slag which thereupon floats on the heat transfer liquid and can be removed from the channel, and a lower horizontal channel for providing direct contact between the heat transfer liquid and pressurized air for preheating the inlet air. The system further includes a seed separator downstream of the heat exchanger.

  2. Closed-loop brain-machine-body interfaces for noninvasive rehabilitation of movement disorders.

    PubMed

    Broccard, Frédéric D; Mullen, Tim; Chi, Yu Mike; Peterson, David; Iversen, John R; Arnold, Mike; Kreutz-Delgado, Kenneth; Jung, Tzyy-Ping; Makeig, Scott; Poizner, Howard; Sejnowski, Terrence; Cauwenberghs, Gert

    2014-08-01

    Traditional approaches for neurological rehabilitation of patients affected with movement disorders, such as Parkinson's disease (PD), dystonia, and essential tremor (ET) consist mainly of oral medication, physical therapy, and botulinum toxin injections. Recently, the more invasive method of deep brain stimulation (DBS) showed significant improvement of the physical symptoms associated with these disorders. In the past several years, the adoption of feedback control theory helped DBS protocols to take into account the progressive and dynamic nature of these neurological movement disorders that had largely been ignored so far. As a result, a more efficient and effective management of PD cardinal symptoms has emerged. In this paper, we review closed-loop systems for rehabilitation of movement disorders, focusing on PD, for which several invasive and noninvasive methods have been developed during the last decade, reducing the complications and side effects associated with traditional rehabilitation approaches and paving the way for tailored individual therapeutics. We then present a novel, transformative, noninvasive closed-loop framework based on force neurofeedback and discuss several future developments of closed-loop systems that might bring us closer to individualized solutions for neurological rehabilitation of movement disorders.

  3. Closed-loop Brain-Machine-Body Interfaces for Noninvasive Rehabilitation of Movement Disorders

    PubMed Central

    Broccard, Frédéric D.; Mullen, Tim; Chi, Yu Mike; Peterson, David; Iversen, John R.; Arnold, Mike; Kreutz-Delgado, Kenneth; Jung, Tzyy-Ping; Makeig, Scott; Poizner, Howard; Sejnowski, Terrence; Cauwenberghs, Gert

    2014-01-01

    Traditional approaches for neurological rehabilitation of patients affected with movement disorders, such as Parkinson's disease (PD), dystonia, and essential tremor (ET) consist mainly of oral medication, physical therapy, and botulinum toxin injections. Recently, the more invasive method of deep brain stimulation (DBS) showed significant improvement of the physical symptoms associated with these disorders. In the past several years, the adoption of feedback control theory helped DBS protocols to take into account the progressive and dynamic nature of these neurological movement disorders that had largely been ignored so far. As a result, a more efficient and effective management of PD cardinal symptoms has emerged. In this paper, we review closed-loop systems for rehabilitation of movement disorders, focusing on PD, for which several invasive and noninvasive methods have been developed during the last decade, reducing the complications and side effects associated with traditional rehabilitation approaches and paving the way for tailored individual therapeutics. We then present a novel, transformative, noninvasive closed-loop framework based on force neurofeedback and discuss several future developments of closed-loop systems that might bring us closer to individualized solutions for neurological rehabilitation of movement disorders. PMID:24833254

  4. Orbital-specific Tunability of Many-Body Effects in Bilayer Graphene by Gate Bias and Metal Contact

    PubMed Central

    Fukidome, Hirokazu; Kotsugi, Masato; Nagashio, Kosuke; Sato, Ryo; Ohkochi, Takuo; Itoh, Takashi; Toriumi, Akira; Suemitsu, Maki; Kinoshita, Toyohiko

    2014-01-01

    Graphene, a 2D crystal bonded by π and σ orbitals, possesses excellent electronic properties that are promising for next-generation optoelectronic device applications. For these a precise understanding of quasiparticle behaviour near the Dirac point (DP) is indispensable because the vanishing density of states (DOS) near the DP enhances many-body effects, such as excitonic effects and the Anderson orthogonality catastrophe (AOC) which occur through the interactions of many conduction electrons with holes. These effects renormalize band dispersion and DOS, and therefore affect device performance. For this reason, we have studied the impact of the excitonic effects and the AOC on graphene device performance by using X-ray absorption spectromicroscopy on an actual graphene transistor in operation. Our work shows that the excitonic effect and the AOC are tunable by gate bias or metal contacts, both of which alter the Fermi energy, and are orbital-specific. PMID:24429879

  5. Closing the Loop: Integrating Body, Muscle and Environment with Locomotion Central Pattern Generators

    DTIC Science & Technology

    2013-06-30

    optimal feedback control, central pattern generator, lamprey , locomotion, neural control Tim Kiemel, Kathleen Hoffman University of Maryland - College Park...between the neural circuitry, body, and fluid environment for swimming locomotion, where the lamprey serves as a model system1,2,3,4,5,6,7,8. Our...have done for a simple plant model of lamprey swimming (§2.2). In our CPG-based approach (§2.3), we have combined a simple CPG model with the plant model

  6. A dimensionless relative trajectory estimation algorithm for autonomous imaging of a small astronomical body in a close distance flyby

    NASA Astrophysics Data System (ADS)

    Ariu, Kaito; Inamori, Takaya; Funase, Ryu; Nakasuka, Shinichi

    2016-08-01

    The world's first micro-spacecraft, ;Proximate Object Close flYby with Optical Navigation; (PROCYON) has the advanced mission to approach an asteroid in dozen km (a one-order closer imaging distance compared with previous probes). In such a close distance encounter, the estimation of the relative trajectory of the target is necessary to perform autonomous imaging. However, the estimation is difficult owing to rapid changes of the line-of-sight direction of the target body. To overcome this problem, a novel dimensionless or direction only relative trajectory estimation algorithm, which uses a least square method, is proposed. The evaluation function for the least square method coincides with the error property of picture information to enable all of its calculations to be recursive and linear. It is suited for the implementation on the limited on-board computer. Numerical simulation results indicate that the proposed algorithm should enable the one-order closer flyby observation.

  7. Closed-kinetic chain upper-body training improves throwing performance of NCAA Division I softball players.

    PubMed

    Prokopy, Max P; Ingersoll, Christopher D; Nordenschild, Edwin; Katch, Frank I; Gaesser, Glenn A; Weltman, Arthur

    2008-11-01

    Closed-kinetic chain resistance training (CKCRT) of the lower body is superior to open-kinetic chain resistance training (OKCRT) to improve performance parameters (e.g., vertical jump), but the effects of upper-body CKCRT on throwing performance remain unknown. This study compared shoulder strength, power, and throwing velocity changes in athletes training the upper body exclusively with either CKCRT (using a system of ropes and slings) or OKCRT. Fourteen female National Collegiate Athletic Association Division I softball player volunteers were blocked and randomly placed into two groups: CKCRT and OKCRT. Blocking ensured the same number of veteran players and rookies in each training group. Training occurred three times weekly for 12 weeks during the team's supervised off-season program. Olympic, lower-body, core training, and upper-body intensity and volume in OKCRT and CKCRT were equalized between groups. Criterion variables pre- and posttraining included throwing velocity, bench press one-repetition maximum (1RM), dynamic single-leg balance, and isokinetic peak torque and power (PWR) (at 180 degrees x s(-1)) for shoulder flexion, extension, internal rotation, and external rotation (ER). The CKCRT group significantly improved throwing velocity by 2.0 mph (3.4%, p < 0.05), and the OKCRT group improved 0.3 mph (0.5%, NS). A significant interaction was observed (p < 0.05). The CKCRT group improved its 1RM bench press to the same degree (1.9 kg) as the OKCRT group (p < 0.05 within each group). The CKCRT group improved all measures of shoulder strength and power, whereas OKCRT conferred little change in shoulder torque and power scores. Although throwing is an open-chain movement, adaptations from CKCRT may confer benefits to subsequent performance. Strength coaches can incorporate upper-body CKCRT without sacrificing gains in maximal strength or performance criteria associated with an athletic open-chain movement such as throwing.

  8. Reversible temperature exchange upon thermal contact

    NASA Astrophysics Data System (ADS)

    Mishchenko, Eugene G.; Pshenichka, Paul F.

    2017-01-01

    According to a well-known principle of thermodynamics, the transfer of heat between two bodies is reversible when their temperatures are infinitesimally close. As we demonstrate, a little-known alternative exists: two bodies with temperatures different by an arbitrary amount can completely exchange their temperatures in a reversible way if split into infinitesimal parts that are brought into thermal contact sequentially.

  9. A multiplex (m)RNA-profiling system for the forensic identification of body fluids and contact traces.

    PubMed

    Lindenbergh, Alexander; de Pagter, Mirjam; Ramdayal, Geeta; Visser, Mijke; Zubakov, Dmitry; Kayser, Manfred; Sijen, Titia

    2012-09-01

    In current forensic practice, information about the possible biological origin of forensic traces is mostly determined using protein-based presumptive testing. Recently, messenger RNA-profiling has emerged as an alternative strategy to examine the biological origin. Here we describe the development of a single multiplex mRNA-based system for the discrimination of the most common forensic body fluids as well as skin cells. A DNA/RNA co-isolation protocol was established that results in DNA yields equivalent to our standard in-house validated DNA extraction procedure which uses silica-based columns. An endpoint RT-PCR assay was developed that simultaneously amplifies 19 (m)RNA markers. This multiplex assay analyses three housekeeping, three blood, two saliva, two semen, two menstrual secretion, two vaginal mucosa, three general mucosa and two skin markers. The assay has good sensitivity as full RNA profiles for blood, semen and saliva were obtained when using ≥0.05 μL body fluid starting material whereas full DNA profiles were obtained with ≥0.1 μL. We investigated the specificity of the markers by analysing 15 different sets of each type of body fluid and skin with each set consisting of 8 individuals. Since skin markers have not been incorporated in multiplex endpoint PCR assays previously, we analysed these markers in more detail. Interestingly, both skin markers gave a positive result in samplings of the hands, feet, back and lips but negative in tongue samplings. Positive identification (regarding both DNA- and RNA-profiling) was obtained for specimens stored for many years, e.g. blood (28 years-old), semen (28 years-old), saliva (6 years-old), skin (10 years-old) and menstrual secretion (4 years-old). The described approach of combined DNA- and RNA-profiling of body fluids and contact traces assists in the interpretation of forensic stains by providing information about not only the donor(s) that contributed to the stain but also by indicating which cell

  10. Monte Carlo simulations of the electric field close to the body in realistic environments for application in personal radiofrequency dosimetry.

    PubMed

    Iskra, S; McKenzie, R; Cosic, I

    2011-11-01

    Personal dosemeters can play an important role in epidemiological studies and in radiofrequency safety programmes. In this study, a Monte Carlo approach is used in conjunction with the finite difference time domain method to obtain distributions of the electric field strength close to a human body model in simulated realistic environments. The field is a proxy for the response of an ideal body-worn electric field dosemeter. A set of eight environments were modelled based on the statistics of Rayleigh, Rice and log-normal fading to simulate outdoor and indoor multipath exposures at 450, 900 and 2100 MHz. Results indicate that a dosemeter mounted randomly within 10-50 mm of the adult or child body model (torso region) will on average underestimate the spatially averaged value of the incident electric field strength by a factor of 0.52 to 0.74 over the frequencies of 450, 900 and 2100 MHz. The uncertainty in results, assessed at the 95 % confidence level (between the 2.5th and 97.5th percentiles) was largest at 2100 MHz and smallest at 450 MHz.

  11. Giant enhancement of noncontact friction between closely spaced bodies by dielectric films and two-dimensional systems

    SciTech Connect

    Volokitin, A. I. Persson, B. N. J.; Ueba, H.

    2007-02-15

    The effect of an external bias voltage and spatial variations of the surface potential on the damping of cantilever vibrations in an atomic force microscope (AFM) is considered. The damping is due to an electrostatic friction that arises due to dissipation of the energy of an electromagnetic field generated in the sample by oscillating static charges induced on the surface of the AFM probe tip by the bias voltage or spatial variations of the surface potential. A similar effect appears when the tip is oscillating in an electrostatic field created by charged defects present in the dielectric sample. The electrostatic friction is compared to the van der Waals (vdW) friction between closely spaced bodies, which is caused by a fluctuating electromagnetic field related to the quantum and thermal fluctuations of current density inside the bodies. It is shown that the electrostatic friction and the vdW friction can be strongly enhanced in the presence of dielectric films or two-dimensional (2D) structures-such as a 2D electron system or an incommensurate layer of adsorbed ions exhibiting acoustic oscillations-on the probe tip and sample surfaces. It is also shown that the damping of cantilever oscillations caused by the electrostatic friction in the presence of such 2D structures can have the same order of magnitude and the same dependence on the distance as observed in experiment by Stipe et al. [Phys. Rev. Lett. 87, 096801 (2001)]. At small distances, the vdW friction can be large enough to be measured in experiment. In interpreting the experimental data that obey a quadratic dependence on the bias voltage, one can reject a phonon mechanism according to which the friction depends on the fourth power of the voltage.

  12. [Transport processes of low-level radioactive liquid effluent of nuclear power station in closed water body].

    PubMed

    Wu, Guo-Zheng; Xu, Zong-Xue

    2012-07-01

    The transport processes of low-level radioactive liquid effluent of Xianning nuclear power station in the closed water body Fushui Reservoir are simulated using the EFDC model. Six nuclides concentration distribution with different half-lives in the reservoir are analyzed under the condition of 97% guarantee rate incoming water and four-running nuclear power units. The results show that the nuclides concentration distribution is mainly affected by the flow field of the reservoir and the concentration is decided by the half-lives of nuclide and the volume of incoming water. In addition, the influence region is enlarged as increasing of half-life and tends to be stable when the half-life is longer than 5 years. Moreover, the waste water discharged from the outlet of the nuclear power plant has no effect on the water-intake for the outlet located at the upstream of the water-intake and the flow field flows to the dam of the reservoir.

  13. The Incidence and Types of Physical Contact Associated with Body Checking Regulation Experience in 13–14 Year Old Ice Hockey Players

    PubMed Central

    Goulet, Claude; Roy, Thierry-Olivier; Nadeau, Luc; Hamel, Denis; Fortier, Kristine; Emery, Carolyn A.

    2016-01-01

    Background: Ice hockey has one of the highest sport participation and injury rates in youth in Canada. Body checking (BC) is the predominant mechanism of injury in leagues in which it is permitted. The objectives of this study were to determine whether the incidence and types of physical contact differ for Bantam players (aged 13–14 years) who were exposed to BC at Pee Wee level (aged 11–12 years) in Calgary, Alberta versus Bantam players who were not exposed to BC at Pee Wee level in Québec City, Québec. All teams were exposed to BC at bantam level; Methods: A cohort study was conducted in Québec City and Calgary. Sixteen games for Calgary and 15 for Québec City were randomly selected and analysed with a validated observation system to quantify five intensities of physical contact and to observe different types of physical contact such as slashing and holding; Results: A total of 5610 incidences of physical contact with the trunk and 3429 other types of physical contact were observed. Very light intensity trunk contact was more frequent in Calgary (adjusted incidence RR (ARR): 1.71; 95% CI: 1.28–2.29). Holding (ARR: 1.04; 95% CI: 1.02–1.07) and slashing (ARR: 1.38; 95% CI: 1.07–1.77) were more frequent in Calgary; Conclusion: Results suggest that players’ physical contacts differ between Bantam leagues in which BC was permitted at Pee Wee level and leagues in which it was not permitted until Bantam level. PMID:27399750

  14. Non-contact multi-radar smart probing of body orientation based on micro-Doppler signatures.

    PubMed

    Li, Yiran; Pal, Ranadip; Li, Changzhi

    2014-01-01

    Micro-Doppler signatures carry useful information about body movements and have been widely applied to different applications such as human activity recognition and gait analysis. In this paper, micro-Doppler signatures are used to identify body orientation. Four AC-coupled continuous-wave (CW) smart radar sensors were used to form a multiple-radar network to carry out the experiments in this paper. 162 tests were performed in total. The experiment results showed a 100% accuracy in recognizing eight body orientations, i.e., facing north, northeast, east, southeast, south, southwest, west, and northwest.

  15. Association between Body Mass Index and Depressive Symptoms of African American Married Couples: Mediating and Moderating Roles of Couples' Behavioral Closeness

    ERIC Educational Resources Information Center

    Wickrama, Thulitha; Bryant, Chalandra M.

    2012-01-01

    This study examined (a) associations between body mass index (BMI) and depressive symptoms in African American husbands and wives, (b) transactional associations between husbands and wives in this relationship, and (c) mediating and moderating role of couples' behavioral closeness in this association. Data came from a sample of 450 African…

  16. Closing in on Close Reading

    ERIC Educational Resources Information Center

    Boyles, Nancy

    2013-01-01

    "A significant body of research links the close reading of complex text--whether the student is a struggling reader or advanced--to significant gains in reading proficiency and finds close reading to be a key component of college and career readiness" (Partnership for Assessment of Readiness for College and Careers, 2011, p. 7). When the author…

  17. Electrochemical characterization of AISI 316L stainless steel in contact with simulated body fluid under infection conditions.

    PubMed

    López, Danián Alejandro; Durán, Alicia; Ceré, Silvia Marcela

    2008-05-01

    Titanium and cobalt alloys, as well as some stainless steels, are among the most frequently used materials in orthopaedic surgery. In industrialized countries, stainless steel devices are used only for temporary implants due to their lower corrosion resistance in physiologic media when compared to other alloys. However, due to economical reasons, the use of stainless steel alloys for permanent implants is very common in developing countries. The implantation of foreign bodies is sometimes necessary in the modern medical practice. However, the complex interactions between the host and the can implant weaken the local immune system, increasing the risk of infections. Therefore, it is necessary to further study these materials as well as the characteristics of the superficial film formed in physiologic media in infection conditions in order to control their potential toxicity due to the release of metallic ions in the human body. This work presents a study of the superficial composition and the corrosion resistance of AISI 316L stainless steel and the influence of its main alloying elements when they are exposed to an acidic solution that simulates the change of pH that occurs when an infection develops. Aerated simulated body fluid (SBF) was employed as working solution at 37 degrees C. The pH was adjusted to 7.25 and 4 in order to reproduce normal body and disease state respectively. Corrosion resistance was measured by means of electrochemical impedance spectroscopy (EIS) and anodic polarization curves.

  18. An Alternate Set of Basis Functions for the Electromagnetic Solution of Arbitrarily-Shaped, Three-Dimensional, Closed, Conducting Bodies Using Method of Moments

    NASA Technical Reports Server (NTRS)

    Mackenzie, Anne I.; Baginski, Michael E.; Rao, Sadasiva M.

    2008-01-01

    In this work, we present an alternate set of basis functions, each defined over a pair of planar triangular patches, for the method of moments solution of electromagnetic scattering and radiation problems associated with arbitrarily-shaped, closed, conducting surfaces. The present basis functions are point-wise orthogonal to the pulse basis functions previously defined. The prime motivation to develop the present set of basis functions is to utilize them for the electromagnetic solution of dielectric bodies using a surface integral equation formulation which involves both electric and magnetic cur- rents. However, in the present work, only the conducting body solution is presented and compared with other data.

  19. Prevalence of tuberculosis among close family contacts of tuberculous patients in South India, and influence of segregation of the patient on the early attack rate*

    PubMed Central

    Andrews, R. H.; Devadatta, S.; Fox, Wallace; Radhakrishna, S.; Ramakrishnan, C. V.; Velu, S.

    1960-01-01

    The results of a study by the Tuberculosis Chemotherapy Centre, Madras, of the merits of home as compared with sanatorium treatment for pulmonary tuberculosis have indicated that treatment at home is satisfactory in the majority of cases. Before domiciliary chemotherapy can be introduced on a large scale, however, it must be established that it does not expose the patient's contacts to a special risk of infection, avoided by his isolation in a sanatorium. Accordingly, a further study was undertaken by the Centre to determine (a) the prevalence of tuberculosis among the family contacts of patients, and (b) the incidence of clinical tuberculosis and of tuberculous infections in the family contacts of the home and sanatorium groups of patients during the first year of treatment. The findings of this study indicate that the major risk for contacts lies in exposure to the infectious case before diagnosis, whether the patient subsequently remains at home or is isolated in a sanatorium appearing to have little importance, if the patients at home are treated with effective chemotherapy. Children under seven years of age proved to be particularly vulnerable to infection. The management of young contacts by chemoprophylaxis or by BCG vaccination, or by both measures, has been discussed. PMID:13683486

  20. Vibrational and rotational transitions in low-energy electron-diatomic-molecule collisions. I - Close-coupling theory in the moving body-fixed frame. II - Hybrid theory and close-coupling theory: An /l subscript z-prime/-conserving close-coupling approximation

    NASA Technical Reports Server (NTRS)

    Choi, B. H.; Poe, R. T.

    1977-01-01

    A detailed vibrational-rotational (V-R) close-coupling formulation of electron-diatomic-molecule scattering is developed in which the target molecular axis is chosen to be the z-axis and the resulting coupled differential equation is solved in the moving body-fixed frame throughout the entire interaction region. The coupled differential equation and asymptotic boundary conditions in the body-fixed frame are given for each parity, and procedures are outlined for evaluating V-R transition cross sections on the basis of the body-fixed transition and reactance matrix elements. Conditions are discussed for obtaining identical results from the space-fixed and body-fixed formulations in the case where a finite truncated basis set is used. The hybrid theory of Chandra and Temkin (1976) is then reformulated, relevant expressions and formulas for the simultaneous V-R transitions of the hybrid theory are obtained in the same forms as those of the V-R close-coupling theory, and distorted-wave Born-approximation expressions for the cross sections of the hybrid theory are presented. A close-coupling approximation that conserves the internuclear axis component of the incident electronic angular momentum (l subscript z-prime) is derived from the V-R close-coupling formulation in the moving body-fixed frame.

  1. Contact dermatitis

    MedlinePlus

    Dermatitis - contact; Allergic dermatitis; Dermatitis - allergic; Irritant contact dermatitis; Skin rash - contact dermatitis ... There are 2 types of contact dermatitis. Irritant dermatitis: This ... can be by contact with acids, alkaline materials such as soaps ...

  2. A study of many-body phenomena in metal nanoclusters (Au, Cu) close to their transition to the nonmetallic state

    SciTech Connect

    Borman, V. D.; Borisyuk, P. V.; Lebid'ko, V. V.; Pushkin, M. A.; Tronin, V. N.; Troyan, V. I. Antonov, D. A.; Filatov, D. O.

    2006-02-15

    The results of a study of many-body phenomena in gold and copper nanoclusters are presented. The measured conductivity as a function of nanocluster height h was found to have a minimum at h {approx} 0.6 nm. Conductivity was local in character at nanocluster sizes l {<=} l{sub c} {approx} 2.5 nm. Changes in core hole screening and an anomalous increase in the Anderson singularity index {alpha} in gold and copper nanoclusters could be caused by changes in permittivity from metallic ({epsilon} {sup {yields}} {infinity}) to nonmetallic ({epsilon} {proportional_to} l{sup 2}). The many-body phenomenon characteristics observed in the X-ray photoelectron and tunnel spectra of gold and copper nanoclusters as the size of the nanoclusters changed led us to suggest changes in the band structure of the nanoclusters and, therefore, their possible transition from the metallic to nonmetallic state.

  3. Close, stable homolog juxtaposition during meiosis in budding yeast is dependent on meiotic recombination, occurs independently of synapsis, and is distinct from DSB-independent pairing contacts

    PubMed Central

    Peoples, Tamara L.; Dean, Eric; Gonzalez, Oscar; Lambourne, Lindsey; Burgess, Sean M.

    2002-01-01

    A site-specific recombination system that probes the relative probabilities that pairs of chromosomal loci collide with one another in living cells of budding yeast was used to explore the relative contributions of pairing, recombination, synaptonemal complex formation, and telomere clustering to the close juxtaposition of homologous chromosome pairs during meiosis. The level of Cre-mediated recombination between a pair of loxP sites located at an allelic position on homologous chromosomes was 13-fold greater than that between a pair of loxP sites located at ectopic positions on nonhomologous chromosomes. Mutations affecting meiotic recombination initiation and the processing of DNA double-strand breaks (DSBs) into single-end invasions (SEIs) reduced the levels of allelic Cre-mediated recombination levels by three- to sixfold. The severity of Cre/loxP phenotypes is presented in contrast to relatively weak DSB-independent pairing defects as assayed using fluorescence in situ hybridization for these mutants. Mutations affecting synaptonemal complex (SC) formation or crossover control gave wild-type levels of allelic Cre-mediated recombination. A delay in attaining maximum levels of allelic Cre-mediated recombination was observed for a mutant defective in telomere clustering. None of the mutants affected ectopic levels of recombination. These data suggest that stable, close homolog juxtaposition in yeast is distinct from pre-DSB pairing interactions, requires both DSB and SEI formation, but does not depend on crossovers or SC. PMID:12101126

  4. JAM-A and aPKC: A close pair during cell-cell contact maturation and tight junction formation in epithelial cells.

    PubMed

    Ebnet, Klaus

    2013-01-01

    Cell-cell adhesion plays a critical role in the formation of barrier-forming epithelia. The molecules which mediate cell-cell adhesion frequently act as signaling molecules by recruiting and/or assembling cytoplasmic protein complexes. Junctional Adhesion Molecule (JAM)-A interacts with the cell polarity protein PAR-3, a member of the PAR-3-aPKC-PAR-6 complex, which regulates the formation of cell-cell contacts and the development of tight junctions (TJs). In our recent study we found that JAM-A is localized at primordial, spot-like cell-cell junctions (pAJs) in a non-phosphorylated form. After the recruitment of the PAR-aPKC complex and its activation at pAJs, aPKC phosphorylates JAM-A at Ser285 to promote the maturation of immature junctions. In polarized epithelial cells, aPKC phosphorylates JAM-A selectively at the TJs to maintain the barrier function of TJs. Thus, through mutual regulation, JAM-A and aPKC form a functional unit that regulates the establishment of barrier-forming junctions in vertebrate epithelial cells.

  5. Contact Interface Verification for DYNA3D Scenario 1: Basic Contact

    SciTech Connect

    McMichael, L D

    2006-05-10

    A suite of test problems has been developed to examine contact behavior within the nonlinear, three-dimensional, explicit finite element analysis (FEA) code DYNA3D (Lin, 2005). The test problems address the basic functionality of the contact algorithms, including the behavior of various kinematic, penalty, and Lagrangian enforcement formulations. The results from the DYNA3D analyses are compared to closed form solutions to verify the contact behavior. This work was performed as part of the Verification and Validation efforts of LLNL W Program within the NNSA's Advanced Simulation and Computing (ASC) Program. DYNA3D models the transient dynamic response of solids and structures including the interactions between disjoint bodies (parts). A wide variety of contact surfaces are available to represent the diverse interactions possible during an analysis, including relative motion (sliding), separation and gap closure (voids), and fixed relative position (tied). The problem geometry may be defined using a combination of element formulations, including one-dimensional beam and truss elements, two-dimensional shell elements, and three-dimensional solid elements. Consequently, it is necessary to consider various element interactions for each contact algorithm being verified. Most of the contact algorithms currently available in DYNA3D are examined; the exceptions are the Type 4--Single Surface Contact and Type 11--SAND algorithms. It is likely that these algorithms will be removed since their functionality is embodied in other, more robust, contact algorithms. The automatic contact algorithm is evaluated using the Type 12 interface. Two other variations of automatic contact, Type 13 and Type 14, offer additional means to adapt the interface domain, but share the same search and restoration algorithms as Type 12. The contact algorithms are summarized in Table 1. This report and associated test problems examine the scenario where one contact surface exists between two

  6. Orbital Distribution Arbitrarily Close to the Homothetic Equilateral Triple Collision in the Free-Fall Three-Body Problem with Equal Masses

    NASA Astrophysics Data System (ADS)

    Umehara, Hiroaki; Tanikawa, Kiyotaka

    The existence of escape and nonescape orbits arbitrarily close to the homothetic equilateral triple-collision orbit is considered analytically in the three-body problem with zero initial velocities and equal masses. It is proved that escape orbits in the initial condition space are distributed around three kinds of isosceles orbits. It is also proved that nonescape orbits are distributed in between the escape orbits where different particles escape. In order to show this, it is proved that the homothetic-equilateral orbit is isolated from other triple-collision orbits as far as the collision at the first triple encounter is concerned. Moreover, the escape criterion is formulated in the planar-isosceles problem and translated into the words of regularizing variables. The result obtained by us explains the orbital structure numerically.

  7. Nuclear shape, growth and integrity in the closed mitosis of fission yeast depend on the Ran-GTPase system, the spindle pole body and the endoplasmic reticulum.

    PubMed

    Gonzalez, Yanira; Meerbrey, Kristen; Chong, Jennifer; Torii, Yoshihiro; Padte, Neal N; Sazer, Shelley

    2009-07-15

    The double lipid bilayer of the nuclear envelope (NE) remains intact during closed mitosis. In the fission yeast Schizosaccharomyces pombe, the intranuclear mitotic spindle has envelope-embedded spindle pole bodies (SPB) at its ends. As the spindle elongates and the nucleus divides symmetrically, nuclear volume remains constant but nuclear area rapidly increases by 26%. When Ran-GTPase function is compromised in S. pombe, nuclear division is strikingly asymmetrical and the newly synthesized SPB is preferentially associated with the smaller nucleus, indicative of a Ran-dependent SPB defect that interferes with symmetrical nuclear division. A second defect, which specifically influences the NE, results in breakage of the NE upon spindle elongation. This defect, but not asymmetric nuclear division, is partially rescued by slowing spindle elongation, stimulating endoplasmic reticulum (ER) proliferation or changing conformation of the ER membrane. We propose that redistribution of lipid within the ER-NE network is crucial for mitosis-specific NE changes in both open and closed mitosis.

  8. Staphylococcus aureus Colonization and Strain Type at Various Body Sites among Patients with a Closed Abscess and Uninfected Controls at U.S. Emergency Departments.

    PubMed

    Albrecht, Valerie S; Limbago, Brandi M; Moran, Gregory J; Krishnadasan, Anusha; Gorwitz, Rachel J; McDougal, Linda K; Talan, David A

    2015-11-01

    Community-associated methicillin-resistant Staphylococcus aureus (CA-MRSA) is a prevalent cause of skin and soft tissue infections (SSTI), but the association between CA-MRSA colonization and infection remains uncertain. We studied the carriage frequency at several body sites and the diversity of S. aureus strains from patients with and without SSTI. Specimens from the nares, throat, rectum, and groin of case subjects with a closed skin abscess (i.e., without drainage) and matched control subjects without a skin infection (n = 147 each) presenting to 10 U.S. emergency departments were cultured using broth enrichment; wound specimens were cultured from abscess cases. Methicillin resistance testing and spa typing were performed for all S. aureus isolates. S. aureus was found in 85/147 (57.8%) of abscesses; 49 isolates were MRSA, and 36 were methicillin-susceptible S. aureus (MSSA). MRSA colonization was more common among cases (59/147; 40.1%) than among controls (27/147; 18.4%) overall (P < 0.001) and at each body site; no differences were observed for MSSA. S. aureus-infected subjects were usually (75/85) colonized with the infecting strain; among MRSA-infected subjects, this was most common in the groin. The CC8 lineage accounted for most of both infecting and colonizing isolates, although more than 16 distinct strains were identified. Nearly all MRSA infections were inferred to be USA300. There was more diversity among colonizing than infecting isolates and among those isolated from controls versus cases. CC8 S. aureus is a common colonizer of persons with and without skin infections. Detection of S. aureus colonization, and especially MRSA, may be enhanced by extranasal site culture.

  9. [Immunology of contact allergy].

    PubMed

    Martin, S F

    2011-10-01

    Contact allergy is a skin disease that is caused by the reaction of the immune system to low molecular weight chemicals. A hallmark of contact allergens is their chemical reactivity, which is not exhibited by toxic irritants. Covalent binding of contact allergens to or complex formation with proteins is essential for the activation of the immune system. As a consequence antigenic epitopes are formed, which are recognized by contact allergen-specific T cells. The generation of effector and memory T cells causes the high antigen specificity and the repeated antigen-specific skin reaction of contact allergy. New findings reveal that the less specific reaction of the innate immune system to contact allergens closely resembles the reaction to an infection. Therefore, contact allergy can be viewed as an immunologic misunderstanding since the skin contact with chemical allergens is interpreted as an infection. The growing understanding of the molecular and cellular pathologic mechanisms of contact allergy can aid the development of specific therapies and of in vitro alternatives to animal testing for the identification of contact allergens.

  10. Contact Dermatitis

    MedlinePlus

    ... Us Media contacts Advertising contacts AAD logo Advertising, marketing and sponsorships Legal notice Copyright © 2017 American Academy ... prohibited without prior written permission. AAD logo Advertising, marketing and sponsorships Legal notice Copyright © 2017 American Academy ...

  11. ELECTRIC CONTACT MEANS

    DOEpatents

    Grear, J.W. Jr.

    1959-03-10

    A switch adapted to maintain electrical connections under conditions of vibration or acceleration is described. According to the invention, thc switch includes a rotatable arm carrying a conductive bar arranged to close against two contacts spaced in the same plane. The firm and continuous engagement of the conductive bar with the contacts is acheived by utilizeing a spring located betwenn the vbar and athe a rem frzme and slidable mounting the bar in channel between two arms suspendef from the arm frame.

  12. Telocyte's contacts.

    PubMed

    Faussone-Pellegrini, Maria-Simonetta; Gherghiceanu, Mihaela

    2016-07-01

    Telocytes (TC) are an interstitial cell type located in the connective tissue of many organs of humans and laboratory mammals. By means of homocellular contacts, TC build a scaffold whose meshes integrity and continuity are guaranteed by those contacts having a mechanical function; those contacts acting as sites of intercellular communication allow exchanging information and spreading signals. Heterocellular contacts between TC and a great variety of cell types give origin to mixed networks. TC, by means of all these types of contacts, their interaction with the extracellular matrix and their vicinity to nerve endings, are part of an integrated system playing tissue/organ-specific roles.

  13. Retrospective Cohort Study of Bronchial Doses and Radiation-Induced Atelectasis After Stereotactic Body Radiation Therapy of Lung Tumors Located Close to the Bronchial Tree

    SciTech Connect

    Karlsson, Kristin; Nyman, Jan; Baumann, Pia; Wersäll, Peter; Drugge, Ninni; Gagliardi, Giovanna; Johansson, Karl-Axel; Persson, Jan-Olov; Rutkowska, Eva; Tullgren, Owe; Lax, Ingmar

    2013-11-01

    Purpose: To evaluate the dose–response relationship between radiation-induced atelectasis after stereotactic body radiation therapy (SBRT) and bronchial dose. Methods and Materials: Seventy-four patients treated with SBRT for tumors close to main, lobar, or segmental bronchi were selected. The association between incidence of atelectasis and bronchial dose parameters (maximum point-dose and minimum dose to the high-dose bronchial volume [ranging from 0.1 cm{sup 3} up to 2.0 cm{sup 3}]) was statistically evaluated with survival analysis models. Results: Prescribed doses varied between 4 and 20 Gy per fraction in 2-5 fractions. Eighteen patients (24.3%) developed atelectasis considered to be radiation-induced. Statistical analysis showed a significant correlation between the incidence of radiation-induced atelectasis and minimum dose to the high-dose bronchial volumes, of which 0.1 cm{sup 3} (D{sub 0.1cm3}) was used for further analysis. The median value of D{sub 0.1cm3} (α/β = 3 Gy) was EQD{sub 2,LQ} = 147 Gy{sub 3} (range, 20-293 Gy{sub 3}). For patients who developed atelectasis the median value was EQD{sub 2,LQ} = 210 Gy{sub 3}, and for patients who did not develop atelectasis, EQD{sub 2,LQ} = 105 Gy{sub 3}. Median time from treatment to development of atelectasis was 8.0 months (range, 1.1-30.1 months). Conclusion: In this retrospective study a significant dose–response relationship between the incidence of atelectasis and the dose to the high-dose volume of the bronchi is shown.

  14. Effects of mid-foot contact area ratio on lower body kinetics/kinematics in sagittal plane during stair descent in women.

    PubMed

    Lee, Jinkyu; Hong, Yoon No Gregory; Shin, Choongsoo S

    2016-07-01

    The mid-foot contact area relative to the total foot contact area can facilitate foot arch structure evaluation. A stair descent motion consistently provides initial fore-foot contact and utilizes the foot arch more actively for energy absorption. The purpose of this study was to compare ankle and knee joint angle, moment, and work in sagittal plane during stair descending between low and high Mid-Foot-Contact-Area (MFCA) ratio group. The twenty-two female subjects were tested and classified into two groups (high MFCA and low MFCA) using their static MFCA ratios. The ground reaction force (GRF) and kinematics of ankle and knee joints were measured while stair descending. During the period between initial contact and the first peak in vertical GRF (early absorption phase), ankle negative work for the low MFCA ratio group was 33% higher than that for the high MFCA ratio group (p<0.05). However, ankle negative work was not significantly different between the two groups during the period between initial contact and peak dorsiflexion angle (early absorption phase+late absorption phase). The peak ankle dorsiflexion angle was smaller in the low MFCA ratio group (p<0.05). Our results suggest that strategy of energy absorption at the ankle and foot differs depending upon foot arch types classified by MFCA. The low MFCA ratio group seemed to absorb more impact energy using strain in the planar fascia during early absorption phase, whereas the high MFCA ratio group absorbed more impact energy using increased dorsiflexion during late absorption phase.

  15. Ultra-low temperature radio-frequency performance of partially depleted silicon-on-insulator n-type metal-oxide-semiconductor field-effect transistors with tunnel diode body contact structures

    NASA Astrophysics Data System (ADS)

    Lu, Kai; Chen, Jing; Huang, Yuping; Liu, Jun; Luo, Jiexin; Wang, Xi

    2016-11-01

    Radio-frequency (RF) characteristics under ultra-low temperature of multi-finger partially depleted silicon-on-insulator (PD SOI) n-type metal-oxide-semiconductor field-effect transistors (nMOSFETs) with tunnel diode body-contact (TDBC) structure and T-gate body-contact (TB) structure are investigated in this paper. When operating at 77 K, TDBC device suppresses floating-body effect (FBE) as well as the TB device. For TB device and TDBC device, cut-off frequency (f T) improves as the temperature decreases to liquid-helium temperature (77 K) while that of the maximum oscillation frequency (f MAX) is opposite due to the decrease of the unilateral power gain. While operating under 77 K, f T and f MAX of TDBC device reach to 125 GHz and 77 GHz, representing 8% and 15% improvements compared with those of TB device, respectively, which is mainly due to the lower parasitic resistances and capacitances. The results indicate that TDBC SOI MOSFETs could be considered as promising candidates for analog and RF applications over a wide range of temperatures and there is immense potential for the development of RF CMOS integrated circuits for cryogenic applications.

  16. Occupational Contact Dermatitis

    PubMed Central

    2008-01-01

    Occupational contact dermatitis accounts for 90% of all cases of work-related cutaneous disorders. It can be divided into irritant contact dermatitis, which occurs in 80% of cases, and allergic contact dermatitis. In most cases, both types will present as eczematous lesions on exposed parts of the body, notably the hands. Accurate diagnosis relies on meticulous history taking, thorough physical examination, careful reading of Material Safety Data Sheets to distinguish between irritants and allergens, and comprehensive patch testing to confirm or rule out allergic sensitization. This article reviews the pathogenesis and clinical manifestations of occupational contact dermatitis and provides diagnostic guidelines and a rational approach to management of these often frustrating cases. PMID:20525126

  17. Experimental determination of flow-interference effects of wing-mounted, two-dimensional, full-capture propulsion nacelles in close proximity to a vehicle body at a Mach number of 6

    NASA Technical Reports Server (NTRS)

    Vahl, W. A.

    1982-01-01

    Experimental tests have been conducted to determine possible aerodynamic interference effects due to the lateral positioning of two dimensional propulsion nacelles mounted on a wing surface in close proximity to a vehicle body. The tests were conducted at a Mach number of 6 and a Reynolds number 7 million per foot. The angle of attack range for force tests was -9 deg to 9 deg. The model configurations consisted of combinations of rectangular and trapezoidal cross section bodies with a wing swept 65 and a rectangular planform wing. A pair of two dimensional, flow through propulsion nacelles simulated full capture inlet operation.

  18. Relaxation damping in oscillating contacts

    PubMed Central

    Popov, M.; Popov, V.L.; Pohrt, R.

    2015-01-01

    If a contact of two purely elastic bodies with no sliding (infinite coefficient of friction) is subjected to superimposed oscillations in the normal and tangential directions, then a specific damping appears, that is not dependent on friction or dissipation in the material. We call this effect “relaxation damping”. The rate of energy dissipation due to relaxation damping is calculated in a closed analytic form for arbitrary axially-symmetric contacts. In the case of equal frequency of normal and tangential oscillations, the dissipated energy per cycle is proportional to the square of the amplitude of tangential oscillation and to the absolute value of the amplitude of normal oscillation, and is dependent on the phase shift between both oscillations. In the case of low frequency tangential oscillations with superimposed high frequency normal oscillations, the dissipation is proportional to the ratio of the frequencies. Generalization of the results for macroscopically planar, randomly rough surfaces as well as for the case of finite friction is discussed. PMID:26549011

  19. A General Simulation Method for Multiple Bodies in Proximate Flight

    NASA Technical Reports Server (NTRS)

    Meakin, Robert L.

    2003-01-01

    Methods of unsteady aerodynamic simulation for an arbitrary number of independent bodies flying in close proximity are considered. A novel method to efficiently detect collision contact points is described. A method to compute body trajectories in response to aerodynamic loads, applied loads, and inter-body collisions is also given. The physical correctness of the methods are verified by comparison to a set of analytic solutions. The methods, combined with a Navier-Stokes solver, are used to demonstrate the possibility of predicting the unsteady aerodynamics and flight trajectories of moving bodies that involve rigid-body collisions.

  20. Active tuberculosis among Iraqi schoolchildren with positive skin tests and their household contacts.

    PubMed

    Al Kubaisy, W; Al Dulayme, A; Hashim, D S

    2003-07-01

    In a prospective cohort study in Iraq, schoolchildren with a positive tuberculin skin test during the nationwide survey in 2000 were followed up in 2002 to determine prevalence of latent tuberculosis (TB) infection and risk factors among household contacts. Of 205 children, 191 remained skin-test positive in 2002. Based on X-ray and clinical examination, 9 children (4.4%) were active TB cases. Among 834 household contacts, there were 144 new TB cases, giving a cumulative incidence of 17.3%. Risk factors for TB among household contacts were: age > or = 15 years; technical/professional job; smoking; low body mass index; diabetes mellitus; steroid therapy; and closeness of contact with the index cases. Based on past history of TB in index children and their contacts, 77.2% of new TB cases were attributable to household contacts.

  1. Contact Interface Verification for DYNA3D Scenario 2: Multi-Surface Contact

    SciTech Connect

    McMichael, L D

    2006-05-10

    A suite of test problems has been developed to examine contact behavior within the nonlinear, three-dimensional, explicit finite element analysis (FEA) code DYNA3D (Lin, 2005). The test problems use multiple interfaces and a combination of enforcement methods to assess the basic functionality of the contact algorithms. The results from the DYNA3D analyses are compared to closed form solutions to verify the contact behavior. This work was performed as part of the Verification and Validation efforts of LLNL W Program within the NNSA's Advanced Simulation and Computing (ASC) Program. DYNA3D models the transient dynamic response of solids and structures including the interactions between disjoint bodies (parts). A wide variety of contact surfaces are available to represent the diverse interactions possible during an analysis, including relative motion (sliding), separation and gap closure (voids), and fixed relative position (tied). The problem geometry may be defined using a combination of element formulations, including one-dimensional beam and truss elements, two-dimensional shell elements, and three-dimensional solid elements. Consequently, it is necessary to consider various element interactions during contact. This report and associated test problems examine the scenario where multiple bodies interact with each other via multiple interfaces. The test problems focus on whether any ordering issues exist in the contact logic by using a combination of interface types, contact enforcement options (i.e., penalty, Lagrange, and kinematic), and element interactions within each problem. The influence of rigid materials on interface behavior is also examined. The companion report (McMichael, 2006) and associated test problems address the basic contact scenario where one contact surface exists between two disjoint bodies. The test problems are analyzed using version 5.2 (compiled on 12/22/2005) of DYNA3D. The analytical results are used to form baseline solutions for

  2. [New recommendations for contact tracing in tuberculosis].

    PubMed

    Diel, R; Loytved, G; Nienhaus, A; Castell, S; Detjen, A; Geerdes-Fenge, H; Haas, W; Hauer, B; Königstein, B; Maffei, D; Magdorf, K; Priwitzer, M; Zellweger, J-P; Loddenkemper, R

    2011-06-01

    In 2007, the German Central Committee against Tuberculosis (DZK) published recommendations for contact tracing that introduced the new interferon gamma release assays (IGRAs). Meanwhile, substantial progress has been made in documenting the utility of IGRAs. Because IGRAs are usually superior to the tuberculin skin test (TST) in detecting latent TB infection (LTBI) with respect to sensitivity and specificity in adult contact populations that are at least partially BCG vaccinated, it is now recommended that instead of two-step testing only IGRAs be used.[nl]As the literature does not yet provide sufficient data on the accuracy of IGRAs in children younger than 5 years, the TST remains the method of choice in that age group. To date, also, no clear body of data exists to substantiate better performance for IGRAs than for the TST in older children, thus in this age group using of either test is recommended. The new recommendations also underscore the importance of a diligent preselection of close contacts in order to achieve a high probability that positive test results represent recent infection and to thus increase the benefit of chemopreventive treatment for those identified as requiring it. In a third point of update, it is noted that re-testing of contacts individuals found positive for LTBI may produce a considerable number of false-negative results and should thus be avoided in case of documented exposure.

  3. Fit for space: Leveraging a novel skin contact measurement technique toward a more efficient liquid cooled garment

    NASA Astrophysics Data System (ADS)

    Compton, Crystal Marie

    Comfort, mobility, and performance are all affected by the fit and contour of a garment to the body. Understanding the body-garment relationship allows for improvement of all of these aspects, and thus the garment and experience for the wearer. With current methods, it is possible to measure the body-garment relationship primarily in static positions, but mobile analysis is time- and equipment-intensive. A more direct garment contour and body contact monitoring procedure would benefit the functional clothing design community. Mobile measurement is especially important for functional garments, as the body-garment relationship changes over time during body movements. Here, we describe a new method developed to measure the body-garment relationship, specifically for mobile scenarios. This method detects body-garment contact using an electrical signal within a circuit formed between the garment and the body. The analog electrical connection (expressed as a varying voltage using a voltage-divider circuit) between the body and a conductive patch is processed and recorded by a microcontroller. In this investigation three main variables were evaluated for their influence on the measurement of body-garment contact: 1) patch materials, 2) applied force, and 3) patch sizes were tested within the body/garment interface. Material results showed that all of the tested materials (with the exception of one material, which contained the sparsest surface area of conductive material) facilitated a voltage response in the presence of body contact that could be viable for detecting contact between body and garment. However, preliminary tests revealed that materials with lower resistivity and more rigid structure facilitated a smoother signal with less noise, which correlated more closely with the input signal. Applied force results showed that the amount of force between the sensor and the body affects the response of the system. All patch sizes with the exception of the smallest size

  4. Mars is close to venus--female reproductive proteins are expressed in the fat body and reproductive tract of honey bee (Apis mellifera L.) drones.

    PubMed

    Colonello-Frattini, Nínive Aguiar; Guidugli-Lazzarini, Karina Rosa; Simões, Zilá Luz Paulino; Hartfelder, Klaus

    2010-11-01

    Vitellogenin (Vg) and lipophorin (Lp) are lipoproteins which play important roles in female reproductive physiology of insects. Both are actively taken up by growing oocytes and especially Vg and its receptor are considered as female-specifically expressed. The finding that the fat body of in honey bee (Apis mellifera) drones synthesizes Vg and is present in hemolymph has long been viewed as a curiosity. The recent paradigm change concerning the role played by Vg in honey bee life history, especially social division of labor, has now led us to investigate whether a physiological constellation similar to that seen in female reproduction may also be represented in the male sex. By means of Western blot analysis we could show that both Vg and Lp are present in the reproductive tract of adult drones, including the accessory (mucus) glands, but apparently are not secreted. Furthermore, we analyzed the transcript levels of the genes encoding these proteins (vg and lp), as well as their putative receptors (Amvgr and Amlpr) in fat body and accessory glands. Whereas lp, vg and Amlpr transcript levels decreased with age in both tissues, Amvgr mRNA levels increased with age in fat body. To our knowledge this is the first report that vitellogenin and its receptor are co-expressed in the reproductive system of a male insect. We interpret these findings as a cross-sexual transfer of a social physiological trait, associated with the rewiring of the juvenile hormone/vitellogenin circuitry that occurred in the female sex of honey bees.

  5. Contact hysteroscopy.

    PubMed

    Baggish, M S; Barbot, J

    1983-06-01

    In 1907 innovations in optics and illumination made by Maximilian Nitze were applied to hysteroscopy by Charles David, who wrote a treatise of hysteroscopy. David improved illumination by placing an electric incandescent bulb at the intrauterine end of his endoscope and also sealed the distal end of the tube with a piece of glass. The history of the contact endoscope that the authors personally used is connected to the invention by Vulmiere (1952) of a revolutionary illumination process in endoscopy--the "cold light" process. The components of cold light consist of a powerful external light source that is transmitted via a special optical guide into the endometrial cavity. The 1st application of his principle (1963) was an optical trochar contained in a metallic sheath. This simple endoscope was perfected, and in 1973 Barbot and Parent, in France, began to use it to examine the uterine cavity. Discussion focuses on methods, instrumentation, method for examination (grasping the instrument, setup, light source, anesthesia, dilatation, technique, and normal endometrium); cervical neoplasia; nonneoplastic lesions of the endometrium (endometrial polyp, submucous myoma, endometrial hyperplasia); intrauterine device localization; neoplastic lesions of the endometrium; precursors (adenocarcinoma); hysteroscopy in pregnancy (embryoscopy, hydatidiform mole, postpartum hemorrhage, incomplete abortion, spontaneous abortion, induced abortions, and amnioscopy); and examinations of children and infants. The contact endoscope must make light contact with the structure to be viewed. The principles of contact endoscopy depend on an interpretation of color, contour, vascular pattern, and a sense of touch. These are computed together and a diagnosis is made on the basis of previously learned clinical pathologic correlations. The contact endoscope is composed of 3 parts: an optical guide; a cylindric chamber that collects and traps ambient light; and a magnifying eyepiece. The phase of

  6. Closed-Loop Flow Control of the Coupled Wake Dynamics and Aerodynamic Loads of a Freely-Pivoting 3-DOF Bluff Body

    NASA Astrophysics Data System (ADS)

    Lambert, T.; Vukasinovic, B.; Glezer, A.

    2016-11-01

    The motion of an axisymmetric bluff body model that is free to pivot in pitch, yaw, and roll in a uniform stream in response to flow-induced aerodynamic loads is controlled in wind tunnel experiments using fluidic actuation. The model is attached to an upstream, wire-supported short streamwise sting through a low-friction hinge, and each of the support wires is individually-controlled by a servo actuator through an in-line load cell. The aerodynamic loads on the body, and thereby its motion, are controlled through fluidic modification of its aerodynamic coupling to its near wake using four independent aft mounted synthetic jet actuators that effect azimuthally-segmented flow attachment over the model's tail end. The effects of actuation-induced, transitory changes in the model's aerodynamic loads are measured by its motion response using motion tracking, while the coupled evolution of the near-wake is captured by high-speed stereo PIV. Flow control authority is demonstrated by feedback-controlled manipulation of the model's dynamic response, and dynamic mode decomposition (DMD) of the wake is used to characterize changes in the wake structure and stability. It is shown that this flow control approach can modify the stability and damping of the model's motion (e.g., suppression or amplification of its natural oscillations), and impose desired directional attitude. Supported by the ARO.

  7. Porous body infiltrating method

    DOEpatents

    Corman, Gregory Scot

    2002-01-01

    A mixture is formed that comprises at least some to about 10 wt % boron nitride and silicon. A body comprising a component that is wetted by or reacts with silicon is contacted with the mixture and the contacted body is infiltrated with silicon from the mixture.

  8. Contact modeling for robotics applications

    SciTech Connect

    Lafarge, R.A.; Lewis, C.

    1998-08-01

    At Sandia National Laboratories (SNL), the authors are developing the ability to accurately predict motions for arbitrary numbers of bodies of arbitrary shapes experiencing multiple applied forces and intermittent contacts. In particular, the authors are concerned with the simulation of systems such as part feeders or mobile robots operating in realistic environments. Preliminary investigation of commercial dynamics software packages led them to the conclusion that they could use commercial software to provide everything they needed except for the contact model. They found that ADAMS best fit their needs for a simulation package. To simulate intermittent contacts, they need collision detection software that can efficiently compute the distances between non-convex objects and return the associated witness features. They also require a computationally efficient contact model for rapid simulation of impact, sustained contact under load, and transition to and from contact conditions. This paper provides a technical review of a custom hierarchical distance computation engine developed at Sandia, called the C-Space Toolkit (CSTk). In addition, they describe an efficient contact model using a non-linear damping term developed by SNL and Ohio State. Both the CSTk and the non-linear damper have been incorporated in a simplified two-body testbed code, which is used to investigate how to correctly model the contact using these two utilities. They have incorporated this model into the ADAMS software using the callable function interface. An example that illustrates the capabilities of the 9.02 release of ADAMS with their extensions is provided.

  9. Effect of Tabor parameter on hysteresis losses during adhesive contact

    NASA Astrophysics Data System (ADS)

    Ciavarella, M.; Greenwood, J. A.; Barber, J. R.

    2017-01-01

    The Tabor parameter μ is conventionally assumed to determine the range of applicability of the classical 'JKR' solution for adhesive elastic contact of a sphere and a plane, with the variation of the contact area and approach with load, and in particular the maximum tensile force (the pull-off force) being well predicted for μ > 5 . Here we show that the hysteretic energy loss during a contact separation cycle is significantly overestimated by the JKR theory, even at quite large values of μ. This stems from the absence of long-range tensile forces in the JKR theory, which implies that jump into contact is delayed until the separation α = 0 . We develop an approximate solution based on the use of Wu's solution with van der Waals interactions for jump-in, and the JKR theory for jump out of contact, and show that for μ > 5 , the predicted hysteresis loss is then close to that found by direct numerical solutions using the Lennard-Jones force law. We also show how the same method can be adapted to allow for contact between bodies with finite support stiffness.

  10. Types of Contact Lenses

    MedlinePlus

    ... Consumer Devices Consumer Products Contact Lenses Types of Contact Lenses Share Tweet Linkedin Pin it More sharing ... Orthokeratology (Ortho-K) Decorative (Plano) Contact Lenses Soft Contact Lenses Soft contact lenses are made of soft, ...

  11. Prioritized Contact Transport Stream

    NASA Technical Reports Server (NTRS)

    Hunt, Walter Lee, Jr. (Inventor)

    2015-01-01

    A detection process, contact recognition process, classification process, and identification process are applied to raw sensor data to produce an identified contact record set containing one or more identified contact records. A prioritization process is applied to the identified contact record set to assign a contact priority to each contact record in the identified contact record set. Data are removed from the contact records in the identified contact record set based on the contact priorities assigned to those contact records. A first contact stream is produced from the resulting contact records. The first contact stream is streamed in a contact transport stream. The contact transport stream may include and stream additional contact streams. The contact transport stream may be varied dynamically over time based on parameters such as available bandwidth, contact priority, presence/absence of contacts, system state, and configuration parameters.

  12. Additional double-wall roof in single-wall, closed, convective incubators: Impact on body heat loss from premature infants and optimal adjustment of the incubator air temperature.

    PubMed

    Delanaud, Stéphane; Decima, Pauline; Pelletier, Amandine; Libert, Jean-Pierre; Stephan-Blanchard, Erwan; Bach, Véronique; Tourneux, Pierre

    2016-09-01

    Radiant heat loss is high in low-birth-weight (LBW) neonates. Double-wall or single-wall incubators with an additional double-wall roof panel that can be removed during phototherapy are used to reduce Radiant heat loss. There are no data on how the incubators should be used when this second roof panel is removed. The aim of the study was to assess the heat exchanges in LBW neonates in a single-wall incubator with and without an additional roof panel. To determine the optimal thermoneutral incubator air temperature. Influence of the additional double-wall roof was assessed by using a thermal mannequin simulating a LBW neonate. Then, we calculated the optimal incubator air temperature from a cohort of human LBW neonate in the absence of the additional roof panel. Twenty-three LBW neonates (birth weight: 750-1800g; gestational age: 28-32 weeks) were included. With the additional roof panel, R was lower but convective and evaporative skin heat losses were greater. This difference can be overcome by increasing the incubator air temperature by 0.15-0.20°C. The benefit of an additional roof panel was cancelled out by greater body heat losses through other routes. Understanding the heat transfers between the neonate and the environment is essential for optimizing incubators.

  13. Microscale hydrodynamics near moving contact lines

    NASA Technical Reports Server (NTRS)

    Garoff, Stephen; Chen, Q.; Rame, Enrique; Willson, K. R.

    1994-01-01

    The hydrodynamics governing the fluid motions on a microscopic scale near moving contact lines are different from those governing motion far from the contact line. We explore these unique hydrodynamics by detailed measurement of the shape of a fluid meniscus very close to a moving contact line. The validity of present models of the hydrodynamics near moving contact lines as well as the dynamic wetting characteristics of a family of polymer liquids are discussed.

  14. The Ankle Injury Management (AIM) trial: a pragmatic, multicentre, equivalence randomised controlled trial and economic evaluation comparing close contact casting with open surgical reduction and internal fixation in the treatment of unstable ankle fractures in patients aged over 60 years.

    PubMed Central

    Keene, David J; Mistry, Dipesh; Nam, Julian; Tutton, Elizabeth; Handley, Robert; Morgan, Lesley; Roberts, Emma; Gray, Bridget; Briggs, Andrew; Lall, Ranjit; Chesser, Tim Js; Pallister, Ian; Lamb, Sarah E; Willett, Keith

    2016-01-01

    BACKGROUND Close contact casting (CCC) may offer an alternative to open reduction and internal fixation (ORIF) surgery for unstable ankle fractures in older adults. OBJECTIVES We aimed to (1) determine if CCC for unstable ankle fractures in adults aged over 60 years resulted in equivalent clinical outcome compared with ORIF, (2) estimate cost-effectiveness to the NHS and society and (3) explore participant experiences. DESIGN A pragmatic, multicentre, equivalence randomised controlled trial incorporating health economic evaluation and qualitative study. SETTING Trauma and orthopaedic departments of 24 NHS hospitals. PARTICIPANTS Adults aged over 60 years with unstable ankle fracture. Those with serious limb or concomitant disease or substantial cognitive impairment were excluded. INTERVENTIONS CCC was conducted under anaesthetic in theatre by surgeons who attended training. ORIF was as per local practice. Participants were randomised in 1 : 1 allocation via remote telephone randomisation. Sequence generation was by random block size, with stratification by centre and fracture pattern. MAIN OUTCOME MEASURES Follow-up was conducted at 6 weeks and, by blinded outcome assessors, at 6 months after randomisation. The primary outcome was the Olerud-Molander Ankle Score (OMAS), a patient-reported assessment of ankle function, at 6 months. Secondary outcomes were quality of life (as measured by the European Quality of Life 5-Dimensions, Short Form questionnaire-12 items), pain, ankle range of motion and mobility (as measured by the timed up and go test), patient satisfaction and radiological measures. In accordance with equivalence trial US Food and Drug Administration guidance, primary analysis was per protocol. RESULTS We recruited 620 participants, 95 from the pilot and 525 from the multicentre phase, between June 2010 and November 2013. The majority of participants, 579 out of 620 (93%), received the allocated treatment; 52 out of 275 (19%) who received CCC later

  15. Contact dynamics math model

    NASA Technical Reports Server (NTRS)

    Glaese, John R.; Tobbe, Patrick A.

    1986-01-01

    The Space Station Mechanism Test Bed consists of a hydraulically driven, computer controlled six degree of freedom (DOF) motion system with which docking, berthing, and other mechanisms can be evaluated. Measured contact forces and moments are provided to the simulation host computer to enable representation of orbital contact dynamics. This report describes the development of a generalized math model which represents the relative motion between two rigid orbiting vehicles. The model allows motion in six DOF for each body, with no vehicle size limitation. The rotational and translational equations of motion are derived. The method used to transform the forces and moments from the sensor location to the vehicles' centers of mass is also explained. Two math models of docking mechanisms, a simple translational spring and the Remote Manipulator System end effector, are presented along with simulation results. The translational spring model is used in an attempt to verify the simulation with compensated hardware in the loop results.

  16. [Allergic contact eczema to ninhydrin].

    PubMed

    Schlacke, K H; Fuchs, T

    1989-01-01

    Use of a surgical marking pen to indicate test areas on the skin during epicutaneous evaluation caused eczema in three female patients undergoing patch testing. Close scrutiny of the individual components of this surgical marking pen revealed contact dermatitis to ninhydrine, a substance whose allergenic potential has hardly been noted in the relevant literature.

  17. Evolution of Close Binary Systems

    SciTech Connect

    Yakut, K; Eggleton, P

    2005-01-24

    We collected data on the masses, radii, etc. of three classes of close binary stars: low-temperature contact binaries (LTCBs), near-contact binaries (NCBs), and detached close binaries (DCBs). They restrict themselves to systems where (1) both components are, at least arguably, near the Main Sequence, (2) the periods are less than a day, and (3) there is both spectroscopic and photometric analysis leading to reasonably reliable data. They discuss the possible evolutionary connections between these three classes, emphasizing the roles played by mass loss and angular momentum loss in rapidly-rotating cool stars.

  18. How Close Is Close Reading?

    ERIC Educational Resources Information Center

    Saccomano, Doreen

    2014-01-01

    Close Reading is a strategy that can be used when reading challenging text. This strategy requires teachers to provide scaffolding, and create opportunities for think-alouds and rereading of text in order to help students become active readers who focus on finding text-based support for their answers. In addition, teachers must also be aware of…

  19. Apparent contact angle and contact angle hysteresis on liquid infused surfaces

    NASA Astrophysics Data System (ADS)

    Semprebon, Ciro; McHale, Glen; Kusumaatmaja, Halim

    We theoretically investigate the apparent contact angle and contact angle hysteresis of a droplet placed on a liquid infused surface. We show that the apparent contact angle is not uniquely defined by material parameters, but also has a strong dependence on the relative size between the droplet and its surrounding wetting ridge formed by the infusing liquid. We derive a closed form expression for the contact angle in the limit of vanishing wetting ridge, and compute the correction for small but finite ridge, which corresponds to an effective line tension term. We also predict contact angle hysteresis on liquid infused surfaces generated by the pinning of the contact lines by the surface corrugations. Our analytical expressions for both the apparent contact angle and contact angle hysteresis can be interpreted as `weighted sums' between the contact angles of the infusing liquid relative to the droplet and surrounding gas phases, where the weighting coefficients are given by ratios of the fluid surface tensions.

  20. Apparent contact angle and contact angle hysteresis on liquid infused surfaces.

    PubMed

    Semprebon, Ciro; McHale, Glen; Kusumaatmaja, Halim

    2016-12-21

    We theoretically investigate the apparent contact angle and contact angle hysteresis of a droplet placed on a liquid infused surface. We show that the apparent contact angle is not uniquely defined by material parameters, but also has a dependence on the relative size between the droplet and its surrounding wetting ridge formed by the infusing liquid. We derive a closed form expression for the contact angle in the limit of vanishing wetting ridge, and compute the correction for small but finite ridge, which corresponds to an effective line tension term. We also predict contact angle hysteresis on liquid infused surfaces generated by the pinning of the contact lines by the surface corrugations. Our analytical expressions for both the apparent contact angle and contact angle hysteresis can be interpreted as 'weighted sums' between the contact angles of the infusing liquid relative to the droplet and surrounding gas phases, where the weighting coefficients are given by ratios of the fluid surface tensions.

  1. Contact Pressure and Shear Stress Analysis on Conforming Contact Problem

    NASA Astrophysics Data System (ADS)

    Nagatani, Haruo; Imou, Akitoshi

    Two methods to solve a conforming contact problem are proposed. First method is general and can be applicable to the contact case between elastic arbitrary shape bodies. For verification FEA is performed on the convex-concave sphere contact, and the result of this method is well corresponding to the FEA result. However, the accuracy deteriorates when the mesh aspect ratio is extremely large. This phenomenon is caused by the usage of numerical integration for the calculation of influence coefficient. The second method is devised to avoid this problem, while this improved method is applicable only to the case when the contact area can be considered to be on a cylinder surface. By using this method, the contact pressure can be obtained without the deterioration even in the case of edge load occurring between ball bearing race shoulder and ball. The results of the contact pressure and the shear stress that is necessary for bearing life estimation are compared with the FEA result, which showed well correspondence.

  2. A Novel Alpha Cardiac Actin (ACTC1) Mutation Mapping to a Domain in Close Contact with Myosin Heavy Chain Leads to a Variety of Congenital Heart Defects, Arrhythmia and Possibly Midline Defects

    PubMed Central

    Augière, Céline; Mégy, Simon; El Malti, Rajae; Boland, Anne; El Zein, Loubna; Verrier, Bernard; Mégarbané, André; Deleuze, Jean-François; Bouvagnet, Patrice

    2015-01-01

    Background A Lebanese Maronite family presented with 13 relatives affected by various congenital heart defects (mainly atrial septal defects), conduction tissue anomalies and midline defects. No mutations were found in GATA4 and NKX2-5. Methods and Results A set of 399 poly(AC) markers was used to perform a linkage analysis which peaked at a 2.98 lod score on the long arm of chromosome 15. The haplotype analysis delineated a 7.7 meganucleotides genomic interval which included the alpha-cardiac actin gene (ACTC1) among 36 other protein coding genes. A heterozygous missense mutation was found (c.251T>C, p.(Met84Thr)) in the ACTC1 gene which changed a methionine residue conserved up to yeast. This mutation was absent from 1000 genomes and exome variant server database but segregated perfectly in this family with the affection status. This mutation and 2 other ACTC1 mutations (p.(Glu101Lys) and p.(Met125Val)) which result also in congenital heart defects are located in a region in close apposition to a myosin heavy chain head region by contrast to 3 other alpha-cardiac actin mutations (p.(Ala297Ser),p.(Asp313His) and p.(Arg314His)) which result in diverse cardiomyopathies and are located in a totally different interaction surface. Conclusions Alpha-cardiac actin mutations lead to congenital heart defects, cardiomyopathies and eventually midline defects. The consequence of an ACTC1 mutation may in part be dependent on the interaction surface between actin and myosin. PMID:26061005

  3. Contact Lens Risks

    MedlinePlus

    ... Health and Consumer Devices Consumer Products Contact Lenses Contact Lens Risks Share Tweet Linkedin Pin it More ... redness blurred vision swelling pain Serious Hazards of Contact Lenses Symptoms of eye irritation can indicate a ...

  4. Contact Lens Care

    MedlinePlus

    ... For Consumers Consumer Information by Audience For Women Contact Lens Care Share Tweet Linkedin Pin it More ... 1088, www.fda.gov/medwatch Learn More about Contact Lens Care Other Tips on Contact Lenses Decorative ...

  5. Adhesion effects in contact interaction of solids

    NASA Astrophysics Data System (ADS)

    Goryacheva, Irina; Makhovskaya, Yulya

    2008-01-01

    An approach to solving problems of the interaction of axisymmetric elastic bodies in the presence of adhesion is developed. The different natures of adhesion, i.e. capillary adhesion, or molecular adhesion described by the Lennard-Jones potential are examined. The effect of additional loading of the interacting bodies outside the contact zone is also investigated. The approach is based on the representation of the pressure outside the contact zone arising from adhesion by a step function. The analytical solution is obtained and is used to analyze the influence of the form of the adhesion interaction potential, of the surface energy of interacting bodies or the films covering the bodies, their shapes (parabolic, higher power exponential function), volume of liquid in the meniscus, density of contact spots, of elastic modulus and the Poisson ratio on the characteristics of the interaction of the bodies in the presence of adhesion. To cite this article: I. Goryacheva, Y. Makhovskaya, C. R. Mecanique 336 (2008).

  6. On the structure of contact binaries. I - The contact discontinuity

    NASA Technical Reports Server (NTRS)

    Shu, F. H.; Lubow, S. H.; Anderson, L.

    1976-01-01

    The problem of the interior structure of contact binaries is reviewed, and a simple resolution of the difficulties which plague the theory is suggested. It is proposed that contact binaries contain a contact discontinuity between the lower surface of the common envelope and the Roche lobe of the cooler star. This discontinuity is maintained against thermal diffusion by fluid flow, and the transition layer is thin to the extent that the dynamical time scale is short in comparison with the thermal time scale. The idealization that the transition layer has infinitesimal thickness allows a simple formulation of the structure equations which are closed by appropriate jump conditions across the discontinuity. The further imposition of the standard boundary conditions suffices to define a unique model for the system once the chemical composition, the masses of the two stars, and the orbital separation are specified.

  7. Foreign Body Embedded in Anterior Chamber Angle

    PubMed Central

    Graffi, Shmuel; Tiosano, Beatrice; Ben Cnaan, Ran; Bahir, Jonathan; Naftali, Modi

    2012-01-01

    Introduction. We present a case of a metallic foreign body embedded in the anterior chamber angle. After standing in close proximity to a construction worker breaking a tile, a 26-year-old woman using soft contact lens for the correction of mild myopia presented to emergency department for evaluation of a foreign body sensation of her right eye. Methods and Results. Diagnosis was confirmed by gonioscopic examination and a noncontrast CT scan of head and orbits. The foreign body was removed by an external approach without utilizing a magnet. The patient's final outcome was favorable. Discussion. The above is a rare clinical situation, which is impossible to detect on slit-lamp examination without a gonioscopic view. Proper imaging and a specific management are mandatory in order to achieve favorable outcome. PMID:23091762

  8. Foreign body embedded in anterior chamber angle.

    PubMed

    Graffi, Shmuel; Tiosano, Beatrice; Ben Cnaan, Ran; Bahir, Jonathan; Naftali, Modi

    2012-01-01

    Introduction. We present a case of a metallic foreign body embedded in the anterior chamber angle. After standing in close proximity to a construction worker breaking a tile, a 26-year-old woman using soft contact lens for the correction of mild myopia presented to emergency department for evaluation of a foreign body sensation of her right eye. Methods and Results. Diagnosis was confirmed by gonioscopic examination and a noncontrast CT scan of head and orbits. The foreign body was removed by an external approach without utilizing a magnet. The patient's final outcome was favorable. Discussion. The above is a rare clinical situation, which is impossible to detect on slit-lamp examination without a gonioscopic view. Proper imaging and a specific management are mandatory in order to achieve favorable outcome.

  9. Surface Contact Model for Comets and Asteroids

    NASA Technical Reports Server (NTRS)

    Blackmore, Lars James C.; Trease, Brian P.; Acikmese, Behcet; Mandic, Milan; Carson, John M.

    2011-01-01

    A contact force model was developed for use in touch and go (TAG) surface sampling simulations on small celestial bodies such as comets and asteroids. In TAG scenarios, a spacecraft descending toward the surface of a small body comes into contact with the surface for a short duration of time, collects material samples with a sampler device, and then ascends to leave the surface. The surface contact required 6-DOF (degrees of freedom) dynamics models due to coupling of the attitude and translation dynamics during the contact. The model described here is for contact scenarios that utilize a rotating brush wheel sampler (BWS) to collect surface material. The model includes stiffness and damping of the surface material during BWS vertical motion, lateral friction from the BWS dragging across the surface, and lateral shear from the rotating BWS scooping the surface material. This model is useful for any mission to asteroids or comets that incorporates surface sampling operations.

  10. Contact Lenses for Vision Correction

    MedlinePlus

    ... Ophthalmologist Patient Stories Español Eye Health / Glasses & Contacts Contact Lenses Sections Contact Lenses for Vision Correction Proper ... to Know About Contact Lenses Colored Contact Lenses Contact Lenses for Vision Correction Written by: Kierstan Boyd ...

  11. Effects of a contoured articular prosthetic device on tibiofemoral peak contact pressure: a biomechanical study

    PubMed Central

    Huber, Roland; Thermann, Hajo; Paessler, Hans H.; Skrbensky, Gobert

    2007-01-01

    Many middle-aged patients are affected by localized cartilage defects that are neither appropriate for primary, nor repeat biological repair methods, nor for conventional arthroplasty. This in vitro study aims to determine the peak contact pressure in the tibiofemoral joint with a partial femoral resurfacing device (HemiCAP®, Arthrosurface Inc., Franklin, MA, USA). Peak contact pressure was determined in eight fresh-frozen cadaveric specimens using a Tekscan sensor placed in the medial compartment above the menisci. A closed loop robotic knee simulator was used to test each knee in static stance positions (5°/15°/30°/45°) with body weight ground reaction force (GRF), 30° flexion with twice the body weight (2tBW) GRF and dynamic knee-bending cycles with body weight GRF. The ground reaction force was adjusted to the living body weight of the cadaver donor and maintained throughout all cycles. Each specimen was tested under four different conditions: Untreated, flush HemiCAP® implantation, 1-mm proud implantation and 20-mm defect. A paired sampled t test to compare means (significance, P ≤ 0.05) was used for statistical analysis. On average, no statistically significant differences were found in any testing condition comparing the normal knee with flush device implantation. With the 1-mm proud implant, statistically significant increase of peak contact pressures of 217% (5° stance), 99% (dynamic knee bending) and 90% (30° stance with 2tBW) compared to the untreated condition was seen. No significant increase of peak contact pressure was evaluated with the 20-mm defect. The data suggests that resurfacing with the HemiCAP® does not lead to increased peak contact pressure with flush implantation. However, elevated implantation results in increased peak contact pressure and might be biomechanically disadvantageous in an in vivo application. PMID:17934718

  12. Contact Dermatitis for the Practicing Allergist.

    PubMed

    Bernstein, David I

    2015-01-01

    This article provides an overview of important practice recommendations from the recently updated Contact Dermatitis Practice Parameter. This updated parameter provides essential recommendations pertaining to clinical history, physical examination, and patch testing evaluation of patients suspected of allergic contact dermatitis. In addition to providing guidance for performing and interpreting closed patch testing, the updated parameter provides concrete recommendations for assessing metal hypersensitivity in patients receiving prosthetic devices, for evaluating workers with occupational contact dermatitis, and also for addressing allergic contact dermatitis in children. Finally, the document provides practical recommendations useful for educating patients regarding avoidance of exposure to known contact sensitizers in the home and at work. The Contact Dermatitis Parameter is designed as a practical, evidence-based clinical tool to be used by allergists and dermatologists who routinely are called upon to evaluate patients with skin disorders.

  13. Closed cell metal foam method

    DOEpatents

    Patten, James W.

    1978-01-01

    Foamed metals and metal alloys which have a closed cellular structure are prepared by heating a metal body containing entrapped inert gas uniformly distributed throughout to a temperature above the melting point of the metal and maintaining the body at this temperature a period of time sufficient to permit the entrapped gas to expand, forming individual cells within the molten metal, thus expanding and foaming the molten metal. After cell formation has reached the desired amount, the foamed molten metal body is cooled to below the melting temperature of the metal. The void area or density of the foamed metal is controlled by predetermining the amount of inert gas entrapped in the metal body and by the period of time the metal body is maintained in the molten state. This method is useful for preparing foamed metals and metal alloys from any metal or other material of which a body containing entrapped inert gas can be prepared.

  14. Rings from Close Encounters

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-09-01

    Weve recently discovered narrow sets of rings around two minor planets orbiting in our solar system. How did these rings form? A new study shows that they could be a result of close encounters between the minor planets and giants like Jupiter or Neptune.Unexpected Ring SystemsPositions of the centaurs in our solar system (green). Giant planets (red), Jupiter trojans (grey), scattered disk objects (tan) and Kuiper belt objects (blue) are also shown. [WilyD]Centaurs are minor planets in our solar system that orbit between Jupiter and Neptune. These bodies of which there are roughly 44,000 with diameters larger than 1 km have dynamically unstable orbits that cross paths with those of one or more giant planets.Recent occultation observations of two centaurs, 10199 Chariklo and 2060 Chiron, revealed that these bodies both host narrow ring systems. Besides our four giant planets, Chariklo and Chiron are the only other bodies in the solar system known to have rings. But how did these rings form?Scientists have proposed several models, implicating collisions, disruption of a primordial satellite, or dusty outgassing. But a team of scientists led by Ryuki Hyodo (Paris Institute of Earth Physics, Kobe University) has recently proposed an alternative scenario: what if the rings were formed from partial disruption of the centaur itself, after it crossed just a little too close to a giant planet?Tidal Forces from a GiantHyodo and collaborators first used past studies of centaur orbits to estimate that roughly 10% of centaurs experience close encounters (passing within a distance of ~2x the planetary radius) with a giant planet during their million-year lifetime. The team then performed a series of simulations of close encounters between a giant planet and a differentiated centaur a body in which the rocky material has sunk to form a dense silicate core, surrounded by an icy mantle.Some snapshots of simulation outcomes (click for a closer look!) for different initial states of

  15. Universal Relations for Identical Bosons from 3-Body Physics

    NASA Astrophysics Data System (ADS)

    Kang, Daekyoung; Platter, Lucas; Braaten, Eric

    2011-05-01

    Systems consisting of identical bosons with a large scattering length satisfy universal relations determined by 2-body physics that are similar to those for fermions with two spin states. They require the momentum distribution to have a large-momentum 1 /k4 tail and the radio-frequency transition rate to have a high-frequency 1 /ω 3 / 2 tail, both of which are proportional to the 2-body contact. Identical bosons also satisfy additional universal relations that are determined by 3-body physics and involve the 3-body contact, which measures the probability of 3 particles being very close together. The coefficients of the 3-body contact in the 1 /k5 tail of the momentum distribution and in the 1 /ω2 tail of the radio-frequency transition rate are log-periodic functions of k and ω that depend on the Efimov parameter. Supported in part by a joint grant from the ARO and the AFOSR and by a grant from the DOE.

  16. Mechanics of the pad-abrasive-wafer contact in chemical mechanical polishing

    NASA Astrophysics Data System (ADS)

    Bozkaya, Dincer

    2009-12-01

    In chemical mechanical polishing (CMP), a rigid wafer is forced on a rough, elastomeric polishing pad, while a slurry containing abrasive particles flows through the interface. The applied pressure on the wafer is carried partially by the 2-body pad-wafer contact (direct contact) and partially by the 3-body contact of pad, wafer and abrasive particles ( particle contact). The fraction of the applied pressure carried by particle contacts is an important factor affecting the material removal rate (MRR) as the majority of the material is removed by the abrasive particles trapped between the pad asperities and the wafer. In this thesis, the contact of a rough, deformable pad and a smooth, rigid wafer in the presence of rigid abrasive particles at the contact interface is investigated by using contact mechanics and finite element (FE) modeling. The interactions between the pad, the wafer and the abrasive particles are modeled at different scales of contact, starting from particle level interactions, and gradually expanding the contact scale to the multi-asperity contact of pad and wafer. The effect of surface forces consisting of van der Waals and electrical double layer forces acting between the wafer and the abrasive particles are also investigated in this work. The wear rate due to each abrasive particle is calculated based on the wafer-abrasive particle contact force, and by considering adhesive and abrasive wear mechanisms. A passivated layer on the wafer surface with a hardness and thickness determined by the chemical effects is modeled, in order to characterize the effect of chemical reactions between slurry and wafer on the MRR. The model provides accurate predictions for the MRR as a function of pad related parameters; pad elastic modulus, pad porosity and pad topography, particle related parameters; particle size and concentration, and slurry related parameters; slurry pH, thickness and hardness of the passivated surface layer of wafer. A good qualitative

  17. Frictional contact of two rotating elastic disks

    NASA Astrophysics Data System (ADS)

    Ostrik, V. I.; Ulitko, A. F.

    2007-10-01

    We study the problem of constrained uniform rotation of two precompressed elastic disks made of different materials with friction forces in the contact region taken into account. The exact solution of the problem is obtained by the Wiener-Hopf method. An important stage in the study of rolling of elastic bodies is the Hertz theory [1] of contact interaction of elastic bodies with smoothly varying curvature in the contact region under normal compression. Friction in the contact region is assumed to be negligible. If there are tangential forces and the friction in the contact region is taken into account, then the picture of contact interaction of elastic bodies changes significantly. Although the normal contact stress distribution strictly follows the Hertz theory for bodies with identical elastic properties and apparently slightly differs from the Hertz diagram for bodies made of different materials, the presence of tangential stresses results in the splitting of the contact region into the adhesion region and the slip region. This phenomenon was first established by Reynolds [2], who experimentally discovered slip regions near points of material entry in and exit from the contact region under constrained rolling of an aluminum cylinder on a rubber base. The theoretical justification of the partial slip phenomenon in the contact region, discovered by Reynolds [2], can be found in Carter [3] and Fromm [4]. Moreover, Fromm presents a complete solution of the problem of constrained uniform rotation of two identical disks. Apparently, Fromm was the first to consider the so-called "clamped" strain and postulated that slip is absent at the point at which the disk materials enter the contact region. Ishlinskii [5, 6] gave an engineering solution of the problem on slip in the contact region under rolling friction. Considering the problem on a rigid disk rolling on an elastic half-plane, we model this problem by an infinite set of elastic vertical rods using Winkler

  18. Rolling Contact Force Energy Reconstruction

    NASA Astrophysics Data System (ADS)

    BRACCIALI, A.; CASCINI, G.

    2000-09-01

    Knowledge of the forces at the wheel-rail contact is fundamental to estimate the consequences in terms of noise and vibration. The traditional use of strain gauges mounted on the wheel web and axle is not capable of determining the high-frequency content of the contact force. Measurements made on the rail are characterized by the spatial variability of input-output transfer functions which makes it difficult to estimate the contact force by simple inversion of the point frequency response function. In this study the problem of rolling contact force reconstruction has been approached through the following steps: (i) the track has been characterized precisely for a finite length by the analysis of the time series of several impacts supplied with an instrumented hammer by using an ARMAX model that proved to be capable of modelling the vertical dynamics of the rail up to 5 kHz; (ii) the response of the rail has been simulated with a random force acting on the system, and the variability of the transfer function has been taken into account by distributing the force on adjacent elements; (iii) the simulated response has been compared with the rail acceleration measured for the passage of several trains; (iv) the wheel-rail contact force has been estimated with a closed-loop algorithm. It has thus been possible to reconstruct the13octave power spectrum of contact forces with a simple and stable iterative procedure. Forces reconstructed from different sensors were found to be practically the same for a given wheel; forces from nominally similar wheels are statistically examined and partial results of comparisons made on different rolling stock are shown.

  19. Methylisothiazolinone contact allergy: a review.

    PubMed

    Lundov, M D; Krongaard, T; Menné, T L; Johansen, J D

    2011-12-01

    In the early 2000s the preservative methylisothiazolinone (MI) was released as an individual preservative for industrial products and, in 2005, it was permitted for use in cosmetic products. Up until then MI had been used only in combination with methylchloroisothiazolinone (MCI). MCI/MI is one of the most frequent causes of preservative contact allergy and early studies showed that both MI and MCI are sensitizers. The prevalence of MI contact allergy is already around 1·5% and sources of exposure are associated with occupation, cosmetic products or household products. Use of MI in industrial products is not restricted and cases of occupational contact allergy to MI, e.g. in painters, are reported. The frequency of use of MI in cosmetics is low, around 1%, while up to 16·5% of household products were preserved with MI. We found 19 (1·5%) out of 1272 cosmetic products labelled with MI, primarily rinse-off products, and analysed the concentration of MI by high-performance-liquid-chromatography the ultraviolet and mass spectrometry detection. The use concentration ranged between 2 and 100 ppm. Repeated exposure to MI showed that many patients allergic to MI reacted to 50 ppm which is half the maximum permitted concentration of MI in cosmetics. The recent cases and prevalence studies on MI contact allergy could be the first sign of an epidemic of MI contact allergy. The development in prevalence of MI contact allergy should be closely monitored by including MI in the European Baseline Series at 2000 ppm.

  20. Contact Us about Asbestos

    EPA Pesticide Factsheets

    How to contact EPA for more information on asbestos, including state and regional contacts, EPA’s Asbestos Abatement/Management Ombudsman and the Toxic Substances Control Act (TSCA) Assistance Information Service (TSCA Hotline).

  1. Colored Contact Lens Dangers

    MedlinePlus

    ... Halloween Hazard: The Hidden Dangers of Buying Decorative Contact Lenses Without a Prescription Sep. 26, 2013 It ... the truth." Real People, Real Problems with Colored Contact Lenses Julian: Teenager Blinded In One Eye By ...

  2. The RNA 3' cleavage factors CstF 64 kDa and CPSF 100 kDa are concentrated in nuclear domains closely associated with coiled bodies and newly synthesized RNA.

    PubMed Central

    Schul, W; Groenhout, B; Koberna, K; Takagaki, Y; Jenny, A; Manders, E M; Raska, I; van Driel, R; de Jong, L

    1996-01-01

    The cleavage stimulation factor (CstF), and the cleavage and polyadenylation specificity factor (CPSF) are necessary for 3'-terminal processing of polyadenylated mRNAs. To study the distribution of 3' cleavage factors in the nuclei of human T24 cells, monoclonal antibodies against the CstF 64 kDa subunit and against the CPSF 100 kDa subunit were used for immunofluorescent labelling. CstF 64 kDa and CPSF 100 kDa were distributed in a fibrogranular pattern in the nucleoplasm and, in addition, were concentrated in 1-4 bright foci. Double immunofluorescence labelling experiments revealed that the foci either overlapped with, or resided next to, a coiled body. Inhibition of transcription with alpha-amanitin or 5,6-dichloro-beta-D-ribofuranosyl-benzimidazole (DRB) resulted in the complete co-localization of coiled bodies and foci containing 3' cleavage factors. Electron microscopy on immunogold double-labelled cells revealed that the foci represent compact spherical fibrous structures, we named 'cleavage bodies', intimately associated with coiled bodies. We found that approximately 20% of the cleavage bodies contained a high concentration of newly synthesized RNA, whereas coiled bodies were devoid of nascent RNA. Our results suggest that the cleavage bodies that contain RNA are those that are adjacent to a coiled body. These findings reveal a dynamic and transcription-dependent interaction between different subnuclear domains, and suggest a relationship between coiled bodies and specific transcripts. Images PMID:8654386

  3. Contact Lenses on Submarines

    DTIC Science & Technology

    2014-09-26

    NAVAL SUBMARINE MEDICAL RESEARCH LABORATORY SUBMARINE BASE, GROTON, CONN. REPORT NUMBER 1048 CONTACT LENSES ON SUBMARINES... CONTACT LENSES ON SUBMARINES by James F. Socks, CDR, MSC, USN NAVAL SUBMARINE MEDICAL RESEARCH LABORATORY REPORT NUMBER 1048 NAVAL MEDICAL RESEARCH...DRSCHLAB Approved for public release; distribution unlimited SUMMARY PAGE PROBLEM To determine the feasibility of wearing contact lenses aboard

  4. Glasses and Contact Lenses

    MedlinePlus

    ... dientes Video: Getting an X-ray Glasses and Contact Lenses KidsHealth > For Kids > Glasses and Contact Lenses Print A A A What's in this ... together the way they should. But eyeglasses or contact lenses, also called corrective lenses, can help most ...

  5. Interfacial closure of contacting surfaces

    NASA Astrophysics Data System (ADS)

    Rieutord, F.; Rauer, C.; Moriceau, H.

    2014-08-01

    Understanding the contact between solid surfaces is a long-standing problem which has a strong impact on the physics of many processes such as adhesion, friction, lubrication and wear. Experimentally, the investigation of solid/solid interfaces remains challenging today, due to the lack of experimental techniques able to provide sub-nanometer scale information on interfaces buried between millimeters of materials. Yet, a strong interest exists improving the modeling of contact mechanics of materials in order to adjust their interface properties (e.g., thermal transport, friction). We show here that the essential features of the residual gap between contacting surfaces can be measured using high energy X-ray synchrotron reflectivity. The presence of this nano-gap is general to the contact of solids. In some special case however, it can be removed when attractive forces take over repulsive contributions, depending on both height and wavelength of asperity distributions (roughness). A criterion for this instability is established in the standard case of van der Waals attractive forces and elastic asperity compression repulsive forces (Hertz model). This collapse instability is confirmed experimentally in the case of silicon direct bonding, using high-energy X-ray synchrotron reflectivity and adhesion energy measurements. The possibility to achieve fully closed interfaces at room temperature opens interesting perspectives to build stronger assemblies with smaller thermal budgets.

  6. MRCK_3D contact detonation algorithm

    SciTech Connect

    Rougier, Esteban; Munjiza, Antonio

    2010-01-01

    Large-scale Combined Finite-Discrete Element Methods (FEM-DEM) and Discrete Element Methods (DEM) simulations involving contact of a large number of separate bod ies need an efficient, robust and flexible contact detection algorithm. In this work the MRCK-3D search algorithm is outlined and its main CPU perfonnances are evaluated. One of the most important aspects of this newly developed search algorithm is that it is applicable to systems consisting of many bodies of different shapes and sizes.

  7. On contact problems of elasticity theory

    NASA Technical Reports Server (NTRS)

    Kalandiya, A. I.

    1986-01-01

    Certain contact problems are reviewed in the two-dimensional theory of elasticity when round bodies touch without friction along most of the boundary and, therefore, Herz' hypothesis on the smallness of the contact area cannot be used. Fundamental equations were derived coinciding externally with the equation in the theory of a finite-span wing with unkown parameter. These equations are solved using Multhopp's well-known technique, and numerical calculations are performed in specific examples.

  8. Contact lens in keratoconus

    PubMed Central

    Rathi, Varsha M; Mandathara, Preeji S; Dumpati, Srikanth

    2013-01-01

    Contact lenses are required for the visual improvement in patients with keratoconus. Various contact lens options, such as rigid gas permeable (RGP) lenses, soft and soft toric lenses, piggy back contact lenses (PBCL), hybrid lenses and scleral lenses are availble. This article discusses about selection of a lens depending on the type of keratoconus and the fitting philosophies of various contact lenses including the starting trial lens. A Medline search was carried out for articles in the English language with the keywords keratoconus and various contact lenses such as Rose k lens, RGP lens, hybrid lens, scleral lens and PBCL. PMID:23925325

  9. Direct-Write Contacts: Metallization and Contact Formation; Preprint

    SciTech Connect

    van Hest, M. F. A. M.; Curtis, C. J.; Miedaner, A.; Pasquarelli, R. M.; Kaydonova, T.; Hersh, P.; Ginley, D. S.

    2008-05-01

    Using direct-write approaches in photovoltaics for metallization and contact formation can significantly reduce the cost per watt of producing photovoltaic devices. Inks have been developed for various materials, such as Ag, Cu, Ni and Al, which can be used to inkjet print metallizations for various kinds of photovoltaic devices. Use of these inks results in metallization with resistivities close to those of bulk materials. By means of inkjet printing a metallization grid can be printed with better resolution, i.e. smaller lines, than screen-printing. Also inks have been developed to deposit transparent conductive oxide films by means of ultrasonic spraying.

  10. Centaur's ring system formation by close encounters

    NASA Astrophysics Data System (ADS)

    De Santana, Thamiris; Winter, Othon

    2016-10-01

    Rupture of small bodies due to close approach to a massive body is a frequent event in the Solar System. Some of these small bodies can just disintegrate completely or suffer a material loss.In this work we study the gravitational interaction between a giant planet and a small body in close encounters in order to simulate the formation of a planetary ring system around a centaur by the partial rupture of the small body.Considering the current Chariklo's body and a disk of particles around it, we simulated the system under close encounters with one of giant planets.Another motivation for the study is also the centaur Chiron, that is a candidate to have a ring system like Chariklo. The characteristics of the encounters are defined by the impact parameter and the velocity at infinity.The results are presented in terms of conditions that could lead to a rupture that could generate a ring like system.

  11. Bibliometrics, dermatology and contact dermatitis.

    PubMed

    Smith, Derek R

    2008-09-01

    Although the fields of bibliometrics and citation analysis have existed for many years, relatively few studies have specifically focused on the dermatological literature. This article reviews citation-based research in the dermatology journals, with a particular interest in manuscripts that have included Contact Dermatitis as part of their analysis. Overall, it can be seen that the rise of bibliometrics during the mid-20th century and its subsequent application to dermatology has provided an interesting insight into the progression of research within our discipline. Further investigation of citation trends and top-cited papers in skin research periodicals would certainly help complement the current body of knowledge.

  12. Finite Element Modeling of a Cylindrical Contact Using Hertzian Assumptions

    NASA Technical Reports Server (NTRS)

    Knudsen, Erik

    2003-01-01

    The turbine blades in the high-pressure fuel turbopump/alternate turbopump (HPFTP/AT) are subjected to hot gases rapidly flowing around them. This flow excites vibrations in the blades. Naturally, one has to worry about resonance, so a damping device was added to dissipate some energy from the system. The foundation is now laid for a very complex problem. The damper is in contact with the blade, so now there are contact stresses (both normal and tangential) to contend with. Since these stresses can be very high, it is not all that difficult to yield the material. Friction is another non-linearity and the blade is made out of a Nickel-based single-crystal superalloy that is orthotropic. A few approaches exist to solve such a problem and computer models, using contact elements, have been built with friction, plasticity, etc. These models are quite cumbersome and require many hours to solve just one load case and material orientation. A simpler approach is required. Ideally, the model should be simplified so the analysis can be conducted faster. When working with contact problems determining the contact patch and the stresses in the material are the main concerns. Closed-form solutions for non-conforming bodies, developed by Hertz, made out of isotropic materials are readily available. More involved solutions for 3-D cases using different materials are also available. The question is this: can Hertzian1 solutions be applied, or superimposed, to more complicated problems-like those involving anisotropic materials? That is the point of the investigation here. If these results agree with the more complicated computer models, then the analytical solutions can be used in lieu of the numerical solutions that take a very long time to process. As time goes on, the analytical solution will eventually have to include things like friction and plasticity. The models in this report use no contact elements and are essentially an applied load problem using Hertzian assumptions to

  13. Non-contact measurement of contact wire

    NASA Astrophysics Data System (ADS)

    Yi, Yaxing; Ye, Xuemei; Li, Zhongke; Yue, Kaiduan

    2008-12-01

    The overhead contact system is the power supply unit of the electric locomotive. This article is to introduce our newly developed method to measure the height and pull out value of the contact wire. A carema dolly which can move on railway is applied to bear the weight of the measure equipment; two linear CCD cameras are installed on the dolly symmetrically about the midline of two rails. While the dolly move along the railway, two CCD cameras grasp the image synchronously, and a computer real-time process the images, the height and pull out value can be calculate out from the images.

  14. Currents and electric fields induced in the human body when the arms are raised

    NASA Astrophysics Data System (ADS)

    King, Ronold W. P.

    1997-06-01

    The current induced in the human body when exposed to an incident electromagnetic field with the electric vector parallel to the length of the body and the magnetic field perpendicular to the chest was determined in an earlier study with the arms in close contact with the body. The analysis is now extended to the case when both arms are raised by an arbitrary angle. Formulas are derived for the current in the arms and the body when the latter is far from the earth, when it is barefoot on wet earth, and when it is standing on the earth with rubber-soled shoes. The current in the arms is shown to consist of two parts, that induced by the component of the incident electric field parallel to the arms and that generated in them by their connection to the body. The current in the body is significantly increased as the arms are raised.

  15. Precision contact of the fingertip reduces postural sway of individuals with bilateral vestibular loss

    NASA Technical Reports Server (NTRS)

    Lackner, J. R.; DiZio, P.; Jeka, J.; Horak, F.; Krebs, D.; Rabin, E.

    1999-01-01

    Contact of the hand with a stationary surface attenuates postural sway in normal individuals even when the level of force applied is mechanically inadequate to dampen body motion. We studied whether subjects without vestibular function would be able to substitute contact cues from the hand for their lost labyrinthine function and be able to balance as well as normal subjects in the dark without finger contact. We also studied the relative contribution of sight of the test chamber to the two groups. Subjects attempted to maintain a tandem Romberg stance for 25 s under three levels of fingertip contact: no contact; light-touch contact, up to 1 N (approximately 100 g) force; and unrestricted contact force. Both eyes open and eyes closed conditions were evaluated. Without contact, none of the vestibular loss subjects could stand for more than a few seconds in the dark without falling; all the normals could. The vestibular loss subjects were significantly more stable in the dark with light touch of the index finger than the normal subjects in the dark without touch. They also swayed less in the dark with light touch than when permitted sight of the test chamber without touch, and less with sight and touch than just sight. The normal subjects swayed less in the dark with touch than without, and less with sight and touch than sight alone. These findings show that during quiet stance light touch of the index finger with a stationary surface can be as effective or even more so than vestibular function for minimizing postural sway.

  16. [Periorbital contact eczema].

    PubMed

    Worm, M; Sterry, W

    2005-11-01

    Periorbital contact eczema is most commonly the result of an allergic contact dermatitis whereas other eczematous skin diseases like atopic eczema or seborrheic eczema occur less frequently. Also, other diseases like autoimmune disorders or rosacea need to be considered. Allergic contact dermatitis is a T-cell-mediated immunological response towards ubiquitous contact allergens. Activated T-cells migrate through the vessels into the skin and produce several inflammatory mediators. Epicutaneous patch testing is an important tool for the diagnosis of contact allergy whereby the allergens are analysed in terms of their ability to induce eczematous skin reaction. Until now the short-term use of corticosteroids are is employed for the treatment of allergic contact eczema. Modern substances with an optimal therapeutic index should rather be used.

  17. Forensic Analysis of a Contact Lens in a Murder Case.

    PubMed

    Zwerling, Charles S

    2016-03-01

    Contact lenses have had rare relevance in trials and/or investigations. After 5 years of burial, orbital remnants were retrieved from an exhumed body and subsequently identified as a key piece of material evidence in a murder trial. The exhumed case materials were evaluated under laboratory conditions and were determined to be contact lens remnants. Contact lens fracture and burial simulation studies were performed to provide additional corroboration of the physical findings of the exhumed contact lens remnants. This material evidence was instrumental in providing factual proof refuting the defendant's testimony in the murder trial. A brief history of contact lens composition and use is provided for understanding the methods and observational results. This forensic case study represents the first published documentation of a contact lens from an exhumed body being used in a murder investigation and establishes an operational procedure for future forensic contact lens examinations.

  18. Contact angle hysteresis explained.

    PubMed

    Gao, Lichao; McCarthy, Thomas J

    2006-07-04

    A view of contact angle hysteresis from the perspectives of the three-phase contact line and of the kinetics of contact line motion is given. Arguments are made that advancing and receding are discrete events that have different activation energies. That hysteresis can be quantified as an activation energy by the changes in interfacial area is argued. That this is an appropriate way of viewing hysteresis is demonstrated with examples.

  19. Soft contact lenses

    PubMed Central

    Sutherland, R. L.; VanLeeuwen, Wm. N.

    1972-01-01

    A series of 55 patients were fitted with a new type of hydrophilic soft contact lens. These were found more comfortable than hard contact lenses and they had a protective and pain-relieving action in cases of chronic corneal disease. Vision was not as good as with hard contact lenses and a greater potential danger of infection was found. They are preferred by many patients despite the noticeable thick edge and the difficulty of obtaining an identical replacement. PMID:5042887

  20. Genetics Home Reference: inclusion body myopathy 2

    MedlinePlus

    ... Conditions inclusion body myopathy 2 inclusion body myopathy 2 Enable Javascript to view the expand/collapse boxes. ... Open All Close All Description Inclusion body myopathy 2 is a condition that primarily affects skeletal muscles , ...

  1. Optical contact micrometer

    DOEpatents

    Jacobson, Steven D.

    2014-08-19

    Certain examples provide optical contact micrometers and methods of use. An example optical contact micrometer includes a pair of opposable lenses to receive an object and immobilize the object in a position. The example optical contact micrometer includes a pair of opposable mirrors positioned with respect to the pair of lenses to facilitate viewing of the object through the lenses. The example optical contact micrometer includes a microscope to facilitate viewing of the object through the lenses via the mirrors; and an interferometer to obtain one or more measurements of the object.

  2. Colors and contact dermatitis.

    PubMed

    Bonamonte, Domenico; Foti, Caterina; Romita, Paolo; Vestita, Michelangelo; Angelini, Gianni

    2014-01-01

    The diagnosis of skin diseases relies on several clinical signs, among which color is of paramount importance. In this review, we consider certain clinical presentations of both eczematous and noneczematous contact dermatitis in which color plays a peculiar role orientating toward the right diagnosis. The conditions that will be discussed include specific clinical-morphologic subtypes of eczematous contact dermatitis, primary melanocytic, and nonmelanocytic contact hyperchromia, black dermographism, contact chemical leukoderma, and others. Based on the physical, chemical, and biologic factors underlying a healthy skin color, the various skin shades drawing a disease picture are thoroughly debated, stressing their etiopathogenic origins and histopathologic aspects.

  3. Multibody dynamic simulation of knee contact mechanics

    PubMed Central

    Bei, Yanhong; Fregly, Benjamin J.

    2006-01-01

    Multibody dynamic musculoskeletal models capable of predicting muscle forces and joint contact pressures simultaneously would be valuable for studying clinical issues related to knee joint degeneration and restoration. Current three-dimensional multi-body knee models are either quasi-static with deformable contact or dynamic with rigid contact. This study proposes a computationally efficient methodology for combining multibody dynamic simulation methods with a deformable contact knee model. The methodology requires preparation of the articular surface geometry, development of efficient methods to calculate distances between contact surfaces, implementation of an efficient contact solver that accounts for the unique characteristics of human joints, and specification of an application programming interface for integration with any multibody dynamic simulation environment. The current implementation accommodates natural or artificial tibiofemoral joint models, small or large strain contact models, and linear or nonlinear material models. Applications are presented for static analysis (via dynamic simulation) of a natural knee model created from MRI and CT data and dynamic simulation of an artificial knee model produced from manufacturer’s CAD data. Small and large strain natural knee static analyses required 1 min of CPU time and predicted similar contact conditions except for peak pressure, which was higher for the large strain model. Linear and nonlinear artificial knee dynamic simulations required 10 min of CPU time and predicted similar contact force and torque but different contact pressures, which were lower for the nonlinear model due to increased contact area. This methodology provides an important step toward the realization of dynamic musculoskeletal models that can predict in vivo knee joint motion and loading simultaneously. PMID:15564115

  4. Factor XII Contact Activation.

    PubMed

    Naudin, Clément; Burillo, Elena; Blankenberg, Stefan; Butler, Lynn; Renné, Thomas

    2017-03-27

    Contact activation is the surface-induced conversion of factor XII (FXII) zymogen to the serine protease FXIIa. Blood-circulating FXII binds to negatively charged surfaces and this contact to surfaces triggers a conformational change in the zymogen inducing autoactivation. Several surfaces that have the capacity for initiating FXII contact activation have been identified, including misfolded protein aggregates, collagen, nucleic acids, and platelet and microbial polyphosphate. Activated FXII initiates the proinflammatory kallikrein-kinin system and the intrinsic coagulation pathway, leading to formation of bradykinin and thrombin, respectively. FXII contact activation is well characterized in vitro and provides the mechanistic basis for the diagnostic clotting assay, activated partial thromboplastin time. However, only in the past decade has the critical role of FXII contact activation in pathological thrombosis been appreciated. While defective FXII contact activation provides thromboprotection, excess activation underlies the swelling disorder hereditary angioedema type III. This review provides an overview of the molecular basis of FXII contact activation and FXII contact activation-associated disease states.

  5. Effect of contact ratio on spur gear dynamic load

    NASA Technical Reports Server (NTRS)

    Liou, Chuen-Huei; Lin, Hsiang Hsi; Oswald, Fred B.; Townsend, Dennis P.

    1992-01-01

    A computer simulation is presented which shows how the gear contact ratio affects the dynamic load on a spur gear transmission. The contact ratio can be affected by the tooth addendum, the pressure angle, the tooth size (diametral pitch), and the center distance. The analysis presented was performed using the NASA gear dynamics code, DANST. In the analysis, the contact ratio was varied over the range 1.20 to 2.40 by changing the length of the tooth addendum. In order to simplify the analysis, other parameters related to contact ratio were held constant. The contact ratio was found to have a significant influence on gear dynamics. Over a wide range of operating speeds, a contact ratio close to 2.0 minimized dynamic load. For low contact ratio gears (contact ratio less than 2.0), increasing the contact ratio reduced the gear dynamic load. For high contact ratio gears (contact ratio = or greater than 2.0), the selection of contact ratio should take into consideration the intended operating speeds. In general, high contact ratio gears minimized dynamic load better than low contact ratio gears.

  6. Effect of contact ratio on spur gear dynamic load

    NASA Astrophysics Data System (ADS)

    Liou, Chuen-Huei; Lin, Hsiang Hsi; Oswald, Fred B.; Townsend, Dennis P.

    A computer simulation is presented which shows how the gear contact ratio affects the dynamic load on a spur gear transmission. The contact ratio can be affected by the tooth addendum, the pressure angle, the tooth size (diametral pitch), and the center distance. The analysis presented was performed using the NASA gear dynamics code, DANST. In the analysis, the contact ratio was varied over the range 1.20 to 2.40 by changing the length of the tooth addendum. In order to simplify the analysis, other parameters related to contact ratio were held constant. The contact ratio was found to have a significant influence on gear dynamics. Over a wide range of operating speeds, a contact ratio close to 2.0 minimized dynamic load. For low contact ratio gears (contact ratio less than 2.0), increasing the contact ratio reduced the gear dynamic load. For high contact ratio gears (contact ratio = or greater than 2.0), the selection of contact ratio should take into consideration the intended operating speeds. In general, high contact ratio gears minimized dynamic load better than low contact ratio gears.

  7. Metal Contacts on Low-Dimensional Materials

    NASA Astrophysics Data System (ADS)

    Yuan, Hui

    As the scaling of the microelectronics is reaching nano regime, low-dimensional materials have been of increasing interest for future electronics applications. The low-dimensional materials, such as Si nanowires (SiNWs), carbon nanotubes (CNTs), graphene and transition metal dichalcogenides (TMDs), not only provide small body for further-scaled devices but also bring about new intrinsic properties for application in future optoelectronics, spintronics and so on. However, the small dimensions add significant difficulty for reducing contact resistance in the nanoelectronic devices. This dissertation presents a study of the metal contacts on low-dimensional materials. The focus of this work is on SiNWs and monolayer or few-layer MoS2. First, the metal contact on SiNW field effect transistors (FETs) was studied with a gate assisted Kelvin structure. In this work, I fabricated ambipolar SiNW FETs with Al contacts. The ambipolar characteristics and the gate assisted Kelvin structure enabled the measurement of the contact properties of both electron and hole flows at the same contact. In this work I found that the contact performance is affected by the carrier type that flows in the channel as well as the current direction. In addition, an inverter was designed and realized on a single SiNW leveraged by the ambipolar FET characteristics. Then, I have studied metal contacts on MoS2, which is one of typical two-dimensional semiconductors. In the first part of this work, Ag and Ti contacts on exfoliated MoS2 monolayers and few-layers are fabricated, characterized and analyzed. Based on the current-voltage (I-V) measurement, surface morphology and Raman spectroscopic measurement, I found that interface morphology plays an important role on the contact performance in MoS2 FETs. In the second part of this work, gate-assisted contact measurement was carried out on chemical vapor deposited low-dimensional MoS 2 layers. The contact resistance and current crowding have been

  8. Noneczematous Contact Dermatitis

    PubMed Central

    Foti, Caterina; Vestita, Michelangelo; Angelini, Gianni

    2013-01-01

    Irritant or allergic contact dermatitis usually presents as an eczematous process, clinically characterized by erythematoedematovesicous lesions with intense itching in the acute phase. Such manifestations become erythematous-scaly as the condition progresses to the subacute phase and papular-hyperkeratotic in the chronic phase. Not infrequently, however, contact dermatitis presents with noneczematous features. The reasons underlying this clinical polymorphism lie in the different noxae and contact modalities, as well as in the individual susceptibility and the various targeted cutaneous structures. The most represented forms of non-eczematous contact dermatitis include the erythema multiforme-like, the purpuric, the lichenoid, and the pigmented kinds. These clinical entities must obviously be discerned from the corresponding “pure” dermatitis, which are not associated with contact with exogenous agents. PMID:24109520

  9. Theory of reciprocating contact for viscoelastic solids

    NASA Astrophysics Data System (ADS)

    Putignano, Carmine; Carbone, Giuseppe; Dini, Daniele

    2016-04-01

    A theory of reciprocating contacts for linear viscoelastic materials is presented. Results are discussed for the case of a rigid sphere sinusoidally driven in sliding contact with a viscoelastic half-space. Depending on the size of the contact, the frequency and amplitude of the reciprocating motion, and on the relaxation time of the viscoelastic body, we establish that the contact behavior may range from the steady-state viscoelastic solution, in which traction forces always oppose the direction of the sliding rigid punch, to a more elaborate trend, which is due to the strong interaction between different regions of the path covered during the reciprocating motion. Practical implications span a number of applications, ranging from seismic engineering to biotechnology.

  10. NUMERICAL MODELING OF CATHODE CONTACT MATERIAL DENSIFICATION

    SciTech Connect

    Koeppel, Brian J.; Liu, Wenning N.; Stephens, Elizabeth V.; Khaleel, Mohammad A.

    2011-11-01

    Numerical modeling was used to simulate the constrained sintering process of the cathode contact layer during assembly of solid oxide fuel cells (SOFCs). A finite element model based on the continuum theory for sintering of porous bodies was developed and used to investigate candidate low-temperature cathode contact materials. Constitutive parameters for various contact materials under investigation were estimated from dilatometry screening tests, and the influence of processing time, processing temperature, initial grain size, and applied compressive stress on the free sintering response was predicted for selected candidate materials. The densification behavior and generated stresses within a 5-cell planar SOFC stack during sintering, high temperature operation, and room temperature shutdown were predicted. Insufficient constrained densification was observed in the stack at the proposed heat treatment, but beneficial effects of reduced grain size, compressive stack preload, and reduced thermal expansion coefficient on the contact layer densification and stresses were observed.

  11. Allergic contact dermatitis.

    PubMed

    Becker, Detlef

    2013-07-01

    Allergic contact dermatitis is a frequent inflammatory skin disease. The suspected diagnosis is based on clinical symptoms, a plausible contact to allergens and a suitable history of dermatitis. Differential diagnoses should be considered only after careful exclusion of any causal contact sensitization. Hence, careful diagnosis by patch testing is of great importance. Modifications of the standardized test procedure are the strip patch test and the repeated open application test. The interpretation of the SLS (sodium lauryl sulfate) patch test as well as testing with the patients' own products and working materials are potential sources of error. Accurate patch test reading is affected in particular by the experience and individual factors of the examiner. Therefore, a high degree of standardization and continuous quality control is necessary and may be supported by use of an online patch test reading course made available by the German Contact Dermatitis Research Group. A critical relevance assessment of allergic patch test reactions helps to avoid relapses and the consideration of differential diagnoses. Any allergic test reaction should be documented in an allergy ID card including the INCI name, if appropriate. The diagnostics of allergic contact dermatitis is endangered by a seriously reduced financing of patch testing by the German statutory health insurances. Restrictive regulations by the German Drug Law block the approval of new contact allergens for routine patch testing. Beside the consistent avoidance of allergen contact, temporary use of systemic and topical corticosteroids is the therapy of first choice.

  12. Telescopic vision contact lens

    NASA Astrophysics Data System (ADS)

    Tremblay, Eric J.; Beer, R. Dirk; Arianpour, Ashkan; Ford, Joseph E.

    2011-03-01

    We present the concept, optical design, and first proof of principle experimental results for a telescopic contact lens intended to become a visual aid for age-related macular degeneration (AMD), providing magnification to the user without surgery or external head-mounted optics. Our contact lens optical system can provide a combination of telescopic and non-magnified vision through two independent optical paths through the contact lens. The magnified optical path incorporates a telescopic arrangement of positive and negative annular concentric reflectors to achieve 2.8x - 3x magnification on the eye, while light passing through a central clear aperture provides unmagnified vision.

  13. Optical contacting of quartz

    NASA Technical Reports Server (NTRS)

    Payne, L. L.

    1982-01-01

    The strength of the bond between optically contacted quartz surfaces was investigated. The Gravity Probe-B (GP-B) experiment to test the theories of general relativity requires extremely precise measurements. The quartz components of the instruments to make these measurements must be held together in a very stable unit. Optical contacting is suggested as a possible method of joining these components. The fundamental forces involved in optical contacting are reviewed and relates calculations of these forces to the results obtained in experiments.

  14. Shock wave interactions between slender bodies. Some aspects of three-dimensional shock wave diffraction

    NASA Astrophysics Data System (ADS)

    Hooseria, S. J.; Skews, B. W.

    2017-01-01

    A complex interference flowfield consisting of multiple shocks and expansion waves is produced when high-speed slender bodies are placed in close proximity. The disturbances originating from a generator body impinge onto the adjacent receiver body, modifying the local flow conditions over the receiver. This paper aims to uncover the basic gas dynamics produced by two closely spaced slender bodies in a supersonic freestream. Experiments and numerical simulations were used to interpret the flowfield, where good agreement between the predictions and measurements was observed. The numerical data were then used to characterise the attenuation associated with shock wave diffraction, which was found to be interdependent with the bow shock contact perimeter over the receiver bodies. Shock-induced boundary layer separation was observed over the conical and hemispherical receiver bodies. These strong viscous-shock interactions result in double-reflected, as well as double-diffracted shock wave geometries in the interference region, and the diffracting waves progress over the conical and hemispherical receivers' surfaces in "lambda" type configurations. This gives evidence that viscous effects can have a substantial influence on the local bow shock structure surrounding high-speed slender bodies in close proximity.

  15. Allergic contact dermatitis from falcarinol isolated from Schefflera arboricola.

    PubMed

    Hansen, L; Hammershøy, O; Boll, P M

    1986-02-01

    From the plant Schefflera arboricola, which has been reported to cause allergic contact dermatitis, we have isolated and determined the elicitor of allergic contact dermatitis as falcarinol, heptadeca-1,9(Z)-diene-4,6-diyne-3-ol. Three polyacetylenes closely related to falcarinol, namely falcarindiol, falcarinone and dehydrofalcarinone were tested simultaneously. Falcarinol, but not falcarindiol, falcarinone and dehydrofalcarinone, elicited allergic contact dermatitis in a 38-year-old female plant-nursery worker.

  16. SAM Technical Contacts

    EPA Pesticide Factsheets

    These technical contacts are available to help with questions regarding method deviations, modifications, sample problems or interferences, quality control requirements, the use of alternative methods, or the need to address analytes or sample types.

  17. Fragrance allergic contact dermatitis.

    PubMed

    Cheng, Judy; Zug, Kathryn A

    2014-01-01

    Fragrances are a common cause of allergic contact dermatitis in Europe and in North America. They can affect individuals at any age and elicit a spectrum of reactions from contact urticaria to systemic contact dermatitis. Growing recognition of the widespread use of fragrances in modern society has fueled attempts to prevent sensitization through improved allergen identification, labeling, and consumer education. This review provides an overview and update on fragrance allergy. Part 1 discusses the epidemiology and evaluation of suspected fragrance allergy. Part 2 reviews screening methods, emerging fragrance allergens, and management of patients with fragrance contact allergy. This review concludes by examining recent legislation on fragrances and suggesting potential additions to screening series to help prevent and detect fragrance allergy.

  18. 76 FR 64134 - Post Office Closing

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-17

    ... informs the public that an appeal of the closing of the Conception Junction, Missouri post office has been... Junction post office in Conception Junction, Missouri. The petition for review was filed by Richard L... Federal government holidays. Docket section personnel may be contacted via electronic mail at...

  19. Contact air abrasion.

    PubMed

    Porth, R

    1999-05-01

    The advantages of contact air abrasion techniques are readily apparent. The first, of course, is the greatly increased ease of use. Working with contact also tends to speed the learning curve by giving the process a more natural dental feel. In addition, as one becomes familiar with working with a dust stream, the potential for misdirecting the air flow is decreased. The future use of air abrasion for deep decay removal will make this the treatment of choice for the next millennium.

  20. Contact dermatitis complicating pinnaplasty.

    PubMed

    Singh-Ranger, G; Britto, J A; Sommerlad, B C

    2001-04-01

    Proflavine allergy is uncommon, occurring in approximately 6% of patients attending contact dermatitis clinics. Proflavine wool is used by many surgeons in the UK as a dressing that can be moulded to conform to the contours of a corrected prominent ear. It may have bacteriostatic properties. We present a case where contact dermatitis in response to proflavine developed after pinnaplasty. This caused diagnostic confusion, a lengthened hospital stay and an unsightly hypertrophic scar.

  1. The impact of contact

    NASA Astrophysics Data System (ADS)

    Finney, B.

    1986-10-01

    Scenarios of the impact on human society of radio contact with an extraterrestrial civilization are presented. Some believe that contact with advanced extraterrestrials would quickly devastate the human spirit, while others believe that these super-intelligent beings would show the inhabitants of the earth how to live in peace. It is proposed that the possible existence of extraterrestrial civilizations and the development of means of studying and communicating with them need to be considered.

  2. Lettuce contact allergy.

    PubMed

    Paulsen, Evy; Andersen, Klaus E

    2016-02-01

    Lettuce (Lactuca sativa L.) and its varieties are important vegetable crops worldwide. They are also well-known, rarely reported, causes of contact allergy. As lettuce allergens and extracts are not commercially available, the allergy may be underdiagnosed. The aims of this article are to present new data on lettuce contact allergy and review the literature. Lettuce is weakly allergenic, and occupational cases are mainly reported. Using aimed patch testing in Compositae-allergic patients, two recent Danish studies showed prevalence rates of positive lettuce reactions of 11% and 22%. The majority of cases are non-occupational, and may partly be caused by cross-reactivity. The sesquiterpene lactone mix seems to be a poor screening agent for lettuce contact allergy, as the prevalence of positive reactions is significantly higher in non-occupationally sensitized patients. Because of the easy degradability of lettuce allergens, it is recommended to patch test with freshly cut lettuce stem and supplement this with Compositae mix. As contact urticaria and protein contact dermatitis may present as dermatitis, it is important to perform prick-to-prick tests, and possibly scratch patch tests as well. Any person who is occupationally exposed to lettuce for longer periods, especially atopics, amateur gardeners, and persons keeping lettuce-eating pets, is potentially at risk of developing lettuce contact allergy.

  3. "Contacting" the Fundamentals: A New Paradigm for Pedagogy

    ERIC Educational Resources Information Center

    Munjee, Tara

    2012-01-01

    Contact improvisation can serve as a way to access new understandings of Bartenieff Fundamentals. Inherent elements of contact improvisation such as thinking and feeling bodily in the moment, sensitivity to activated weight along with weight sharing and bearing, flow, whole-body organization, and immediacy of embodied presence provide fertile…

  4. Pre-therapy: the application of contact reflections.

    PubMed

    Prouty, Garry

    2007-01-01

    Contact Reflections are the primary method of Pre-Therapy. There are five formalized techniques: situational, facial, word-for-word, body, and reiterative. Together they form a web of psychological contact enabling the development of therapeutic relationships. A case history of treatment with a client with retardation and psychosis is presented with a discussion of the therapist's innovative technique.

  5. CORROSION RESISTANT JACKETED METAL BODY

    DOEpatents

    Brugmann, E.W.

    1958-08-26

    S>Metal jacketed metallic bodies of the type used as feel elements fer nuclear reactors are presented. The fuel element is comprised of a plurality of jacketed cylindrical bodies joined in end to end abutting relationship. The abutting ends of the internal fissionable bodies are provided with a mating screw and thread means for joining the two together. The jacket material is of a corrosion resistant metal and overlaps the abutting ends of the internal bodies, thereby effectively sealing these bodies from contact with exteral reactive gases and liquids.

  6. Non-local residue-residue contacts in proteins are more conserved than local ones.

    PubMed

    Noivirt-Brik, Orly; Hazan, Gershon; Unger, Ron; Ofran, Yanay

    2013-02-01

    Non-covalent residue-residue contacts drive the folding of proteins and stabilize them. They may be local-i.e. involve residues that are close in sequence, or non-local. It has been suggested that, in most proteins, local contacts drive protein folding by providing crucial constraints of the conformational space, thus allowing proteins to fold. We compared residues that are involved in local contacts to residues that are involved in non-local contacts and found that, in most proteins, residues in non-local contacts are significantly more conserved evolutionarily than residues in local contacts. Moreover, non-local contacts are more structurally conserved: a contact between positions that are distant in sequence is more likely to exist in many structural homologues compared with a contact between positions that are close in sequence. These results provide new insights into the mechanisms of protein folding and may allow for better prediction of critical intra-chain contacts.

  7. The impact of contact angle on the biocompatibility of biomaterials.

    PubMed

    Menzies, Kara L; Jones, Lyndon

    2010-06-01

    Biomaterials may be defined as artificial materials that can mimic, store, or come into close contact with living biological cells or fluids and are becoming increasingly popular in the medical, biomedical, optometric, dental, and pharmaceutical industries. Within the ophthalmic industry, the best example of a biomaterial is a contact lens, which is worn by approximately 125 million people worldwide. For biomaterials to be biocompatible, they cannot illicit any type of unfavorable response when exposed to the tissue they contact. A characteristic that significantly influences this response is that related to surface wettability, which is often determined by measuring the contact angle of the material. This article reviews the impact of contact angle on the biocompatibility of tissue engineering substrates, blood-contacting devices, dental implants, intraocular lenses, and contact lens materials.

  8. Electrical contacts to nanocrystalline diamond films studied at high temperatures

    NASA Astrophysics Data System (ADS)

    Shimoda, Naotaka; Kato, Yoshimine; Teii, Kungen

    2016-12-01

    Electrical contacts of Ni, NiSi, Cu, Au, Al, and Ti electrodes to an n-type nanocrystalline diamond film are studied at temperatures between room temperature and 500 °C in a vacuum by the transmission line measurement. Direct current-voltage characteristics measured between pairs of electrodes on the film show almost straight lines, typical of ohmic contacts, for all kinds of electrode materials. The measured series resistance is divided into resistance of the film, resistance of the electrode, and the contact resistance between the electrode and film. The Ni electrode has the lowest contact resistance, which decreases from about 380 to 200 mΩ cm2 with temperature. The contact resistance accounts for a large portion of the total resistance at low temperatures. The results confirm that the contact resistance has a close relation with the work function of electrodes such that the larger the work function, the lower the contact resistance.

  9. The contact caveat: negative contact predicts increased prejudice more than positive contact predicts reduced prejudice.

    PubMed

    Barlow, Fiona Kate; Paolini, Stefania; Pedersen, Anne; Hornsey, Matthew J; Radke, Helena R M; Harwood, Jake; Rubin, Mark; Sibley, Chris G

    2012-12-01

    Contact researchers have largely overlooked the potential for negative intergroup contact to increase prejudice. In Study 1, we tested the interaction between contact quantity and valence on prejudice toward Black Australians (n = 1,476), Muslim Australians (n = 173), and asylum seekers (n = 293). In all cases, the association between contact quantity and prejudice was moderated by its valence, with negative contact emerging as a stronger and more consistent predictor than positive contact. In Study 2, White Americans (n = 441) indicated how much positive and negative contact they had with Black Americans on separate measures. Although both quantity of positive and negative contact predicted racism and avoidance, negative contact was the stronger predictor. Furthermore, negative (but not positive) contact independently predicted suspicion about Barack Obama's birthplace. These results extend the contact hypothesis by issuing an important caveat: Negative contact may be more strongly associated with increased racism and discrimination than positive contact is with its reduction.

  10. Focusing on Contact Lens Safety

    MedlinePlus

    ... Consumers Home For Consumers Consumer Updates Focusing on Contact Lens Safety Share Tweet Linkedin Pin it More ... substantial consumer injury. Back to top Types of Contact Lenses General categories Soft contact lenses. These are ...

  11. 76 FR 73653 - National Cancer Institute; Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-29

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Cancer Institute; Notice of Closed Meeting... Health, 6116 Executive Boulevard, Rockville, MD 20852, (Telephone Conference Call). Contact Person:...

  12. DETAIL ELEVATION OF UPSTREAM PARAPET. NOTE THE CLOSED SPANDRELS WHERE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL ELEVATION OF UPSTREAM PARAPET. NOTE THE CLOSED SPANDRELS WHERE THE BEAM BEARINGS CONTACT THE SLENDER CONCRETE PIERS. VIEW FACING SOUTH. - Waikele Canal Bridge and Highway Overpass, Farrington Highway and Waikele Stream, Waipahu, Honolulu County, HI

  13. 75 FR 61101 - Closed Captioning of Video Programming

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-04

    ... COMMISSION 47 CFR Part 79 Closed Captioning of Video Programming AGENCY: Federal Communications Commission... and Governmental Affairs Bureau (Bureau), waives in part the requirement that video programming... video programming distributors to place contact information required by this section in local...

  14. Gunshot residue patterns on skin in angled contact and near contact gunshot wounds.

    PubMed

    Plattner, T; Kneubuehl, B; Thali, M; Zollinger, U

    2003-12-17

    The goal of this study was the reproduction of shape and pattern of gunshot residues in near contact and contact gunshot wounds by a series of experimental gunshots on a skin and soft tissue model. The aim was to investigate the shape and direction of soot deposits with regard to the muzzle according to different muzzle-target angles, firing distances, type of ammunition and weapon and barrel length. Based on a review of the literature and on the results of the experiments the authors could make the following statements of gunshot residues in angled contact and close contact gunshot: (1) gunshot residues on the target surface can be differentiated in a "inner" and "outer powder soot zone"; (2) the outer powder soot zone is much less visible than the inner powder soot zone and may lack on human skin; (3) with increasing muzzle target distance both inner and outer powder soot halo increase in size and decrease in density; (4) in angled shots the inner powder soot halo shows an eccentric, elliptic shape which points towards the muzzle, regardless of ammunition, calibre and barrel length; (5) the outer powder soot points away from the muzzle in angled contact and close contact shots.

  15. Myxobacteria Fruiting Body Formation

    NASA Astrophysics Data System (ADS)

    Jiang, Yi

    2006-03-01

    Myxobacteria are social bacteria that swarm and glide on surfaces, and feed cooperatively. When starved, tens of thousands of cells change their movement pattern from outward spreading to inward concentration; they form aggregates that become fruiting bodies, inside which cells differentiate into nonmotile, environmentally resistant spores. Traditionally, cell aggregation has been considered to imply chemotaxis, a long-range cell interaction mediated by diffusing chemicals. However, myxobacteria aggregation is the consequence of direct cell-contact interactions. I will review our recent efforts in modeling the fruiting body formation of Myxobacteria, using lattice gas cellular automata models that are based on local cell-cell contact signaling. These models have reproduced the individual phases in Myxobacteria development such as the rippling, streaming, early aggregation and the final sporulation; the models can be unified to simulate the whole developmental process of Myxobacteria.

  16. Allergic contact dermatitis.

    PubMed

    Alikhan, Ali; Maibach, Howard I

    2014-01-01

    Allergic contact dermatitis is one of the most important dermatologic disorders worldwide - it can cause significant morbidity and decreased quality of life, as well as having major economic implications and loss of vocational productivity. Patch testing is the most important discovery in allergic contact dermatitis and the best diagnostic modality to date; the thin-layer rapid- use epicutaneous (TRUE) test is a more recent patch test development which has improved the convenience and feasibility of the test. The future of allergic contact dermatitis is bright as we continue to learn more about the science of the disorder, as well as ways to improve diagnosis and patient care. Furthermore, it is important to remember, in this global age, that cooperation between health care providers worldwide is essential.

  17. [Contact glass tonometer].

    PubMed

    Kanngiesser, H; Robert, Y; Dekker, P

    1996-10-01

    This paper present a tonometer incorporated in a contact lens, which allows simultaneous measurement of intraocular pressure and performance ophthalmoscopy. The tonometer can record the pulse curve continuously, which can give us an indication of any circulatory problem. The device is therefore expected to yield additional information useful for the diagnosis of early glaucoma. Te device has three force sensors built in, which allow continuous measurement of the force exerted on the eye surface by the contact lens. The force of the contact lens on the eye can be altered and makes the adjustment of different eye pressures possible. These induced changes of the eye pressure and their influence on the fundus can be checked. We have taken some measurements on enucleated human eyes to compare our device with a Statham tansducer in the vitreous. We found a good correlation. We are currently taking measurements in volunteers. The clinical relevance of these observations and measurements will be examined in a future study.

  18. Shoe allergic contact dermatitis.

    PubMed

    Matthys, Erin; Zahir, Amir; Ehrlich, Alison

    2014-01-01

    Foot dermatitis is a widespread condition, affecting men and women of all ages. Because of the location, this condition may present as a debilitating problem to those who have it. Allergic contact dermatitis involving the feet is frequently due to shoes or socks. The allergens that cause shoe dermatitis can be found in any constituent of footwear, including rubber, adhesives, leather, dyes, metals, and medicaments. The goal of treatment is to identify and minimize contact with the offending allergen(s). The lack of product information released from shoe manufacturers and the continually changing trends in footwear present a challenge in treating this condition. The aim of this study is to review the current literature on allergic contact shoe dermatitis; clinical presentation, allergens, patch testing, and management will be discussed. PubMed and MEDLINE databases were used for the search, with a focus on literature updates from the last 15 years.

  19. Acrylate Systemic Contact Dermatitis.

    PubMed

    Sauder, Maxwell B; Pratt, Melanie D

    2015-01-01

    Acrylates, the 2012 American Contact Dermatitis Society allergen of the year, are found in a range of products including the absorbent materials within feminine hygiene pads. When fully polymerized, acrylates are nonimmunogenic; however, if not completely cured, the monomers can be potent allergens.A 28-year-old woman is presented, who had her teeth varnished with Isodan (Septodont, Saint-Maur-des-Fossés, France) containing HEMA (2-hydroxyethyl methacrylate) with no initial reaction. Approximately 1 month later, the patient developed a genital dermatitis secondary to her feminine hygiene pads. The initial reaction resolved, but 5 months later, the patient developed a systemic contact dermatitis after receiving a second varnishing.The patient was dramatically patch test positive to many acrylates. This case demonstrates a reaction to likely unpolymerized acrylates within a feminine hygiene pad, as well as broad cross-reactivity or cosensitivity to acrylates, and possibly a systemic contact dermatitis with systemic re-exposure to unpolymerized acrylates.

  20. Spatial analyses of wildlife contact networks

    PubMed Central

    Davis, Stephen; Abbasi, Babak; Shah, Shrupa; Telfer, Sandra; Begon, Mike

    2015-01-01

    Datasets from which wildlife contact networks of epidemiological importance can be inferred are becoming increasingly common. A largely unexplored facet of these data is finding evidence of spatial constraints on who has contact with whom, despite theoretical epidemiologists having long realized spatial constraints can play a critical role in infectious disease dynamics. A graph dissimilarity measure is proposed to quantify how close an observed contact network is to being purely spatial whereby its edges are completely determined by the spatial arrangement of its nodes. Statistical techniques are also used to fit a series of mechanistic models for contact rates between individuals to the binary edge data representing presence or absence of observed contact. These are the basis for a second measure that quantifies the extent to which contacts are being mediated by distance. We apply these methods to a set of 128 contact networks of field voles (Microtus agrestis) inferred from mark–recapture data collected over 7 years and from four sites. Large fluctuations in vole abundance allow us to demonstrate that the networks become increasingly similar to spatial proximity graphs as vole density increases. The average number of contacts, , was (i) positively correlated with vole density across the range of observed densities and (ii) for two of the four sites a saturating function of density. The implications for pathogen persistence in wildlife may be that persistence is relatively unaffected by fluctuations in host density because at low density is low but hosts move more freely, and at high density is high but transmission is hampered by local build-up of infected or recovered animals. PMID:25411407

  1. Spatial analyses of wildlife contact networks.

    PubMed

    Davis, Stephen; Abbasi, Babak; Shah, Shrupa; Telfer, Sandra; Begon, Mike

    2015-01-06

    Datasets from which wildlife contact networks of epidemiological importance can be inferred are becoming increasingly common. A largely unexplored facet of these data is finding evidence of spatial constraints on who has contact with whom, despite theoretical epidemiologists having long realized spatial constraints can play a critical role in infectious disease dynamics. A graph dissimilarity measure is proposed to quantify how close an observed contact network is to being purely spatial whereby its edges are completely determined by the spatial arrangement of its nodes. Statistical techniques are also used to fit a series of mechanistic models for contact rates between individuals to the binary edge data representing presence or absence of observed contact. These are the basis for a second measure that quantifies the extent to which contacts are being mediated by distance. We apply these methods to a set of 128 contact networks of field voles (Microtus agrestis) inferred from mark-recapture data collected over 7 years and from four sites. Large fluctuations in vole abundance allow us to demonstrate that the networks become increasingly similar to spatial proximity graphs as vole density increases. The average number of contacts, 〈k〉, was (i) positively correlated with vole density across the range of observed densities and (ii) for two of the four sites a saturating function of density. The implications for pathogen persistence in wildlife may be that persistence is relatively unaffected by fluctuations in host density because at low density 〈k〉 is low but hosts move more freely, and at high density 〈k〉 is high but transmission is hampered by local build-up of infected or recovered animals.

  2. Effects of tissue conductivity and electrode area on internal electric fields in a numerical human model for ELF contact current exposures

    NASA Astrophysics Data System (ADS)

    Tarao, H.; Kuisti, H.; Korpinen, L.; Hayashi, N.; Isaka, K.

    2012-05-01

    Contact currents flow through the human body when a conducting object with different potential is touched. There are limited reports on numerical dosimetry for contact current exposure compared with electromagnetic field exposures. In this study, using an anatomical human adult male model, we performed numerical calculation of internal electric fields resulting from 60 Hz contact current flowing from the left hand to the left foot as a basis case. Next, we performed a variety of similar calculations with varying tissue conductivity and contact area, and compared the results with the basis case. We found that very low conductivity of skin and a small electrode size enhanced the internal fields in the muscle, subcutaneous fat and skin close to the contact region. The 99th percentile value of the fields in a particular tissue type did not reliably account for these fields near the electrode. In the arm and leg, the internal fields for the muscle anisotropy were identical to those in the isotropy case using a conductivity value longitudinal to the muscle fibre. Furthermore, the internal fields in the tissues abreast of the joints such as the wrist and the elbow, including low conductivity tissues, as well as the electrode contact region, exceeded the ICNIRP basic restriction for the general public with contact current as the reference level value.

  3. Spa contact dermatitis.

    PubMed

    Yankura, Jessica A; Marks, James G; Anderson, Bryan E; Adams, David R

    2008-01-01

    Potassium monopersulfate (MPS) is widely used in spa and pool "shock" treatments, yet contact dermatitis associated with MPS has been rarely reported. A patient presented with a generalized scattered dermatitis from the neck down that worsened after spa use. Patch testing elicited a ++ reaction to ammonium persulfate. Contact with ammonium persulfate was ruled out; however, MPS, which can cross-react with ammonium persulfate, was found to be the active ingredient in the patient's spa shock treatments. The dermatitis cleared after the patient switched to a hydrogen peroxide-based shock treatment.

  4. Allergic Contact Dermatitis.

    PubMed

    Kostner, Lisa; Anzengruber, Florian; Guillod, Caroline; Recher, Mike; Schmid-Grendelmeier, Peter; Navarini, Alexander A

    2017-02-01

    Allergic contact dermatitis (ACD) is a common skin disease caused by a T cell-mediated immune reaction to usually innocuous allergens. ACD can have grave medical and socioeconomic consequences. ACD and irritant contact dermatitis often occur together. A detailed history and clinical examination are crucial and guide patch testing, which is the gold standard to diagnose ACD. T-cell clones persisting in the skin may explain the tendency of ACD to relapse even after years of allergen avoidance. Traditional treatments for ACD are topical steroids, calcineurin inhibitors, phototherapy, retinoids (including the recent alitretinoin), and immunosuppressants. Targeted therapies are lacking.

  5. Body Composition.

    ERIC Educational Resources Information Center

    Mayhew, Jerry L.

    1981-01-01

    Body composition refers to the types and amounts of tissues which make up the body. The most acceptable method for assessing body composition is underwater weighing. A subcutaneous skinfold provides a quantitative measurement of fat below the skin. The skinfold technique permits a valid estimate of the body's total fat content. (JN)

  6. Moving contact line of a volatile fluid.

    PubMed

    Janeček, V; Andreotti, B; Pražák, D; Bárta, T; Nikolayev, V S

    2013-12-01

    Interfacial flows close to a moving contact line are inherently multiscale. The shape of the interface and the flow at meso- and macroscopic scales inherit an apparent interface slope and a regularization length, both named after Voinov, from the microscopic inner region. Here, we solve the inner problem associated with the contact line motion for a volatile fluid at equilibrium with its vapor. The evaporation or condensation flux is then controlled by the dependence of the saturation temperature on interface curvature-the so-called Kelvin effect. We derive the dependencies of the Voinov angle and of the Voinov length as functions of the parameters of the problem. We then identify the conditions under which the Kelvin effect is indeed the mechanism regularizing the contact line motion.

  7. Static and dynamic contact angles of water droplet on a solid surface using molecular dynamics simulation.

    PubMed

    Hong, Seung Do; Ha, Man Yeong; Balachandar, S

    2009-11-01

    The present study investigates the variation of static contact angle of a water droplet in equilibrium with a solid surface in the absence of a body force and the dynamic contact angles of water droplet moving on a solid surface for different characteristic energies using the molecular dynamics simulation. With increasing characteristic energy, the static contact angle in equilibrium with a solid surface in the absence of a body force decreases because the hydrophobic surface changes its characteristics to the hydrophilic surface. In order to consider the effect of moving water droplet on the dynamic contact angles, we apply the constant acceleration to an individual oxygen and hydrogen atom. In the presence of a body force, the water droplet changes its shape with larger advancing contact angle than the receding angle. The dynamic contact angles are compared with the static contact angle in order to see the effect of the presence of a body force.

  8. School Closings in Philadelphia

    ERIC Educational Resources Information Center

    Jack, James; Sludden, John

    2013-01-01

    In 2012, the School District of Philadelphia closed six schools. In 2013, it closed 24. The closure of 30 schools has occurred amid a financial crisis, headlined by the district's $1.35 billion deficit. School closures are one piece of the district's plan to cut expenditures and close its budget gap. The closures are also intended to make…

  9. Can Whole-Body Cryotherapy with Subsequent Kinesiotherapy Procedures in Closed Type Cryogenic Chamber Improve BASDAI, BASFI, and Some Spine Mobility Parameters and Decrease Pain Intensity in Patients with Ankylosing Spondylitis?

    PubMed Central

    Stanek, Agata; Cholewka, Armand; Gadula, Jolanta; Drzazga, Zofia; Sieron, Aleksander; Sieron-Stoltny, Karolina

    2015-01-01

    The present study investigated whether whole-body cryotherapy (WBC) procedures could potentially have more beneficial effects on index of BASDAI and BASFI, pain intensity, and spine mobility parameters: Ott test, modified Schober test, chest expansion in ankylosing spondylitis (AS) patients, than kinesiotherapy procedures used separately. AS patients were exposed to a cycle of WBC procedures lasting 3 minutes a day, with a subsequent 60 minutes of kinesiotherapy or 60 minutes of kinesiotherapy only, for 10 consecutive days excluding weekend. After the completion of the cycle of WBC procedures with subsequent kinesiotherapy in the AS patients, BASDAI index decreased about 40% in comparison with the input value, whereas in the group of patients who received only kinesiotherapy it decreased only about 15% in comparison with the input value. After the completion of the treatment in the WBC group, BASFI index decreased about 30% in comparison with the input value, whereas in the kinesiotherapy group it only decreased about 16% in comparison with the input value. The important conclusion was that, in WBC group with subsequent kinesiotherapy, we observed on average about twice better results than in the group treated only by kinesiotherapy. PMID:26273618

  10. How Tibiofemoral Alignment and Contact Locations Affect Predictions of Medial and Lateral Tibiofemoral Contact Forces

    PubMed Central

    Lerner, Zachary F.; DeMers, Matthew S.; Delp, Scott L.; Browning, Raymond C.

    2015-01-01

    Understanding degeneration of biological and prosthetic knee joints requires knowledge of the in-vivo loading environment during activities of daily living. Musculoskeletal models can estimate medial/lateral tibiofemoral compartment contact forces, yet anthropometric differences between individuals make accurate predictions challenging. We developed a full-body OpenSim musculoskeletal model with a knee joint that incorporates subject-specific tibiofemoral alignment (i.e. knee varus-valgus) and geometry (i.e. contact locations). We tested the accuracy of our model and determined the importance of these subject-specific parameters by comparing estimated to measured medial and lateral contact forces during walking in an individual with an instrumented knee replacement and post-operative genu valgum (6°). The errors in the predictions of the first peak medial and lateral contact force were 12.4% and 11.9%, respectively, for a model with subject-specific tibiofemoral alignment and contact locations determined via radiographic analysis, vs. 63.1% and 42.0%, respectively, for a model with generic parameters. We found that each degree of tibiofemoral alignment deviation altered the first peak medial compartment contact force by 51N (r2=0.99), while each millimeter of medial-lateral translation of the compartment contact point locations altered the first peak medial compartment contact force by 41N (r2=0.99). The model, available at www.simtk.org/home/med-lat-knee/, enables the specification of subject-specific joint alignment and compartment contact locations to more accurately estimate medial and lateral tibiofemoral contact forces in individuals with non-neutral alignment. PMID:25595425

  11. Have Confidence in Contact

    ERIC Educational Resources Information Center

    Crisp, Richard J.; Turner, Rhiannon N.

    2010-01-01

    In an article in the May-June 2009 "American Psychologist," we discussed a new approach to reducing prejudice and encouraging more positive intergroup relations (Crisp & Turner, 2009). We named the approach imagined intergroup contact and defined it as "the mental simulation of a social interaction with a member or members of an outgroup category"…

  12. Compact contacting device

    NASA Technical Reports Server (NTRS)

    Acharya, Arun (Inventor); Gottzmann, Christian F. (Inventor); Lockett, Michael J. (Inventor); Schneider, James S. (Inventor); Victor, Richard A. (Inventor); Zawierucha, Robert (Inventor)

    1994-01-01

    An apparatus comprising a rotatable mass of structured packing for mass or heat transfer between two contacting fluids of different densities wherein the packing mass is made up of corrugated sheets of involute shape relative to the axis of the packing mass and form a logarithmic spiral curved counter to the direction of rotation.

  13. Contact: Releasing the news

    NASA Astrophysics Data System (ADS)

    Pinotti, Roberto

    The problem of mass behavior after man's future contacts with other intelligences in the universe is not only a challenge for social scientists and political leaders all over the world, but also a cultural time bomb as well. In fact, since the impact of CETI (Contact with Extraterrestrial Intelligence) on human civilization, with its different cultures, might cause a serious socio-anthropological shock, a common and predetermined worldwide strategy is necessary in releasing the news after the contact, in order to keep possible manifestations of fear, panic and hysteria under control. An analysis of past studies in this field and of parallel historical situations as analogs suggests a definite "authority crisis" in the public as a direct consequence of an unexpected release of the news, involving a devastating "chain reaction" process (from both the psychological and sociological viewpoints) of anomie and maybe the collapse of today's society. The only way to prevent all this is to prepare the world's public opinion concerning contact before releasing the news, and to develop a long-term strategy through the combined efforts of scientists, political leaders, intelligence agencies and the mass media, in order to create the cultural conditions in which a confrontation with ETI won't affect mankind in a traumatic way. Definite roles and tasks in this multi-level model are suggested.

  14. Disproportionate Minority Contact.

    PubMed

    Fix, Rebecca L; Cyperski, Melissa A; Burkhart, Barry R

    2017-04-01

    The overrepresentation of racial/ethnic minorities within the criminal justice system relative to their population percentage, a phenomenon termed disproportionate minority contact, has been examined within general adult and adolescent offender populations; yet few studies have tested whether this phenomenon extends to juvenile sexual offenders (JSOs). In addition, few studies have examined whether offender race/ethnicity influences registration and notification requirements, which JSOs are subject to in some U.S. states. The present study assessed for disproportionate minority contact among general delinquent offenders and JSOs, meaning it aimed to test whether the criminal justice system treats those accused of sexual and non-sexual offenses differently by racial/ethnic group. Furthermore, racial/ethnic group differences in risk, legal classification, and sexual offending were examined for JSOs. Results indicated disproportionate minority contact was present among juveniles with non-sexual offenses and JSOs in Alabama. In addition, offense category and risk scores differed between African American and European American JSOs. Finally, registration classifications were predicted by offending characteristics, but not race/ethnicity. Implications and future directions regarding disproportionate minority contact among JSOs and social and legal policy affecting JSOs are discussed.

  15. Lubrication Of Nonconformal Contacts

    NASA Technical Reports Server (NTRS)

    Jeng, Yeau-Ren

    1991-01-01

    Report discusses advances in knowledge of lubrication of nonconformal contacts in bearings and other machine elements. Reviews previous developments in theory of lubrication, presents advances in theory of lubrication to determine minimum film thickness, and describes experiments designed to investigate one of regimes of lubrication for ball bearings.

  16. Thermal Contact Conductance

    NASA Technical Reports Server (NTRS)

    Salerno, Louis J.; Kittel, Peter

    1997-01-01

    The performance of cryogenic instruments is often a function of their operating temperature. Thus, designers of cryogenic instruments often are required to predict the operating temperature of each instrument they design. This requires accurate thermal models of cryogenic components which include the properties of the materials and assembly techniques used. When components are bolted or otherwise pressed together, a knowledge of the thermal performance of such joints are also needed. In some cases, the temperature drop across these joints represents a significant fraction of the total temperature difference between the instrument and its cooler. While extensive databases exist on the thermal properties of bulk materials, similar databases for pressed contacts do not. This has often lead to instrument designs that avoid pressed contacts or to the over-design of such joints at unnecessary expense. Although many people have made measurements of contact conductances at cryogenic temperatures, this data is often very narrow in scope and even more often it has not been published in an easily retrievable fashion, if published at all. This paper presents a summary of the limited pressed contact data available in the literature.

  17. Temporomandibular Joint, Closed

    MedlinePlus

    ... form does not collect any actual information. External Web Site Policy This graphic notice ( ) means that you are ... the link. Home Contact Us Viewers and Players Site Map FOIA Web Policies Privacy Policy National Institute of Dental and ...

  18. Are silicone hydrogel contact lenses more comfortable than hydrogel contact lenses?

    PubMed

    Guillon, Michel

    2013-01-01

    The current literature review was intended to investigate whether the use of silicone hydrogel contact lenses has resulted in improved comfort compared with that of hydrogel contact lenses when both are used for daily wear. The conclusion reached is that silicone hydrogel contact lenses, which were initially developed to eliminate hypoxia during overnight wear, have not significantly improved comfort compared with the comfort achieved with hydrogel contact lenses when worn on a daily wear basis, even though a body of the published literature would suggest to the contrary. A careful review and consideration of the literature demonstrates that the relative comfort achieved with the two types of contact lenses is in fact highly dependent on the study methodology: Although refitting studies have concluded enhanced comfort with silicone hydrogels, the more robust study designs involving concurrent controls and masking were not able to show a difference, and some even concluded an inferior performance. Evidence-based review has however clearly demonstrated that comfort cannot be considered in isolation but is contact lens specific and depends on the material surface and bulk properties, lens design characteristics, and modality of use of the contact lens, and may also be significantly influenced by the replacement frequency and interaction with any lens care system that may be used.

  19. The scaling of eye size with body mass in birds

    PubMed Central

    Brooke, M. de L.; Hanley, S.; Laughlin, S. B.

    1999-01-01

    We developed a simple method that uses skulls to estimate the diameter, and hence the mass, of birds' eyes. Allometric analysis demonstrated that, within five orders (parrots, pigeons, petrels, raptors and owls) and across 104 families of flying birds, eye mass is proportional to (body mass)0.68 over a range of body masses (6 g to 11.3 kg). As expected from their habits and visual ecology, raptors and owls have enlarged eyes, with masses 1.4 and 2.2 times greater than average birds of the same weight. Taking existing relationships for flight speed on body mass, we find that resolution increases close to (flight speed)1.333. Consequently, large birds resolve objects at a longer time to contact than small birds. Eye radius and skull size co-vary in strict proportion, suggesting common physiological, aerodynamic and mechanical constraints. Because eye mass scales close to brain mass, metabolic rate and information processing could also be limiting, but the precise factors determining the scaling of eye to body have not been identified.

  20. Contact-resistance process cliff

    NASA Technical Reports Server (NTRS)

    Pina, C. A.

    1985-01-01

    Several approaches were investigated to obtain a measure of the quality of the contact resistance between metal and a diffused or polysilicon layer. These approaches have included the use of both short and very long contact strings as well as arays of contacts with different sizes to determine the contact resistance process cliff. Results from these approaches are discussed.

  1. Allergic contact dermatitis in children.

    PubMed

    Fontana, E; Belloni Fortina, A

    2014-12-01

    Allergic contact dermatitis is an inflammatory skin disease (delayed type hypersensitivity reaction) that accounts for up to 20% of all childhood dermatitis. Allergic contact dermatitis represents a clinical manifestation of contact sensitization and usually occurs at skin sites that have come into contact with the allergen. The clinical features of allergic contact dermatitis are itchy eczematous lesions. Prevalence of contact sensitization varies between 27% and 96% of children with suspected contact dermatitis. The relationship between contact sensitization and atopic dermatitis has been widely discussed but only conflicting data have been reported. Epicutaneous patch testing is the gold standard for the diagnosis of allergic contact dermatitis. The most common allergens detected in children are: metals, topical medicaments, fragrances, and preservatives. The first line management of allergic contact dermatitis in children is to avoid the offending allergens identified with the patch test and a topical corticosteroid therapy.

  2. Locomotion in elongate fishes: A contact sport.

    PubMed

    Ward, Andrea B; Costa, Alyssa; Monroe, Stephanie L; Aluck, Robert J; Mehta, Rita S

    2015-10-01

    Despite the physical differences between water and air, a number of fish lineages are known to make terrestrial excursions on land. Many of these fishes exhibit an elongate body plan. Elongation of the body can occur in several ways, the most common of which is increasing the number of vertebrae in one or both regions of the axial skeleton--precaudal and/or caudal. Elongate species are often found in three-dimensionally complex habitats. It has been hypothesized that elongate fishes use this structure to their locomotor advantage. In this study, we consider how elongation and differences in vertebral regionalization correspond with the use of wooden pegs, which are provided as analogs to vertically oriented substrate, structures that protrude above the ground. We compare aquatic and terrestrial locomotor behaviors of Polypterus senegalus, Erpetoichthys calabaricus, and Gymnallabes typus as they move through a peg array. When considering axial elongation we find that the highly elongate species, E. calabaricus and G. typus, contact more pegs but on average move slower in both environments than P. senegalus. When considering axial regionalization, we find that the precaudally elongate species, P. senegalus and E. calabaricus, differ in the patterns of peg contact between the two environments whereas the caudally elongate species, G. typus, exhibits similar peg contact between the two environments. Our study highlights the importance of incorporating body shape and vertebral regionalization to understand how elongate fishes move in water and on land.

  3. Close approach maneuvers around an oblate planet

    NASA Astrophysics Data System (ADS)

    Oliveira, G. M. C.; Prado, A. F. B. A.; Sanchez, D. M.

    2015-10-01

    There are many applications of the close approach maneuvers in astronautics, and several missions used this technique in the last decades. In the present work, those close approach maneuvers are revisited, but now considering that the spacecraft passes around an oblate planet. This fact changes the distribution of mass of the planet, increasing the mass in the region of the equator, so increasing the gravitational forces in the equatorial plane. Since the present study is limited to planar trajectories, there is an increase in the variation of energy given by the maneuver. The planet Jupiter is used as the body for the close approach, but the value of J2 is varied in a large range to simulate situations of other celestial bodies that have larger oblateness, but the same mass ratio. This is particularly true in recent discovered exoplanets, and this first study can help the study of the dynamics around those bodies.

  4. [Contact dermatitis from Agave americana].

    PubMed

    de la Cueva, Pablo; González-Carrascosa, Mateo; Campos, Minia; Leis, Vicente; Suárez, Ricardo; Lázaro, Pablo

    2005-10-01

    Numerous plant species and their derivatives can cause skin reactions through a variety of mechanisms: irritative contact dermatitis, allergic contact dermatitis, contact urticaria and photodermatitis. We present a case of irritative contact dermatitis after exposure to the sap of Agave americana. The skin symptoms in this case have only been described on rare occasions; although this condition usually presents with a papulovesicular rash, in this patient it appeared as purpuric lesions in the contact area.

  5. Determination of optimal whole body vibration amplitude and frequency parameters with plyometric exercise and its influence on closed-chain lower extremity acute power output and EMG activity in resistance trained males

    NASA Astrophysics Data System (ADS)

    Hughes, Nikki J.

    The optimal combination of Whole body vibration (WBV) amplitude and frequency has not been established. Purpose. To determine optimal combination of WBV amplitude and frequency that will enhance acute mean and peak power (MP and PP) output EMG activity in the lower extremity muscles. Methods. Resistance trained males (n = 13) completed the following testing sessions: On day 1, power spectrum testing of bilateral leg press (BLP) movement was performed on the OMNI. Days 2 and 3 consisted of WBV testing with either average (5.8 mm) or high (9.8 mm) amplitude combined with either 0 (sham control), 10, 20, 30, 40 and 50 Hz frequency. Bipolar surface electrodes were placed on the rectus femoris (RF), vastus lateralis (VL), bicep femoris (BF) and gastrocnemius (GA) muscles for EMG analysis. MP and PP output and EMG activity of the lower extremity were assessed pre-, post-WBV treatments and after sham-controls on the OMNI while participants performed one set of five repetitions of BLP at the optimal resistance determined on Day 1. Results. No significant differences were found between pre- and sham-control on MP and PP output and on EMG activity in RF, VL, BF and GA. Completely randomized one-way ANOVA with repeated measures demonstrated no significant interaction of WBV amplitude and frequency on MP and PP output and peak and mean EMGrms amplitude and EMG rms area under the curve. RF and VL EMGrms area under the curve significantly decreased (p < 0.05) with high WBV amplitude, whereas low amplitude significantly decreased GA mean and peak EMGrms amplitude and EMGrms area under the curve. VL mean EMGrms amplitude and BF mean and peak EMGrms amplitudes were significantly decreased (p < 0.05) with high WBV amplitude when compared to sham-control. WBV frequency significantly decreased (p < 0.05) VL mean and peak EMGrms amplitude. WBV frequency at 30 and 40 Hz significantly decreased (p < 0.05) GA mean EMGrms amplitude and 20 and 30 Hz significantly decreased GA peak EMGrms

  6. Contact Graph Routing

    NASA Technical Reports Server (NTRS)

    Burleigh, Scott C.

    2011-01-01

    Contact Graph Routing (CGR) is a dynamic routing system that computes routes through a time-varying topology of scheduled communication contacts in a network based on the DTN (Delay-Tolerant Networking) architecture. It is designed to enable dynamic selection of data transmission routes in a space network based on DTN. This dynamic responsiveness in route computation should be significantly more effective and less expensive than static routing, increasing total data return while at the same time reducing mission operations cost and risk. The basic strategy of CGR is to take advantage of the fact that, since flight mission communication operations are planned in detail, the communication routes between any pair of bundle agents in a population of nodes that have all been informed of one another's plans can be inferred from those plans rather than discovered via dialogue (which is impractical over long one-way-light-time space links). Messages that convey this planning information are used to construct contact graphs (time-varying models of network connectivity) from which CGR automatically computes efficient routes for bundles. Automatic route selection increases the flexibility and resilience of the space network, simplifying cross-support and reducing mission management costs. Note that there are no routing tables in Contact Graph Routing. The best route for a bundle destined for a given node may routinely be different from the best route for a different bundle destined for the same node, depending on bundle priority, bundle expiration time, and changes in the current lengths of transmission queues for neighboring nodes; routes must be computed individually for each bundle, from the Bundle Protocol agent's current network connectivity model for the bundle s destination node (the contact graph). Clearly this places a premium on optimizing the implementation of the route computation algorithm. The scalability of CGR to very large networks remains a research topic

  7. Body Measurement.

    ERIC Educational Resources Information Center

    Neufeld, K. Allen

    1989-01-01

    Described are activities for measuring the human body. The activities include measurements and calculations, calculating volume and density, problems related to body measurement, and using a nomogram. Several charts, illustrations, and a nomogram are provided. (YP)

  8. Occupational protein contact dermatitis.

    PubMed

    Barbaud, Annick; Poreaux, Claire; Penven, Emmanuelle; Waton, Julie

    2015-01-01

    Occupational contact dermatitis is generally caused by haptens but can also be induced by proteins causing mainly immunological contact urticaria (ICU); chronic hand eczema in the context of protein contact dermatitis (PCD). In a monocentric retrospective study, from our database, only 31 (0.41%) of patients with contact dermatitis had positive skin tests with proteins: 22 had occupational PCD, 3 had non-occupational PCD, 5 occupational ICU and 1 cook had a neutrophilic fixed food eruption (NFFE) due to fish. From these results and analysis of literature, the characteristics of PCD can be summarized as follows. It is a chronic eczematous dermatitis, possibly exacerbated by work, suggestive if associated with inflammatory perionyxix and immediate erythema with pruritis, to be investigated when the patient resumes work after a period of interruption. Prick tests with the suspected protein-containing material are essential, as patch tests have negative results. In case of multisensitisation revealed by prick tests, it is advisable to analyse IgE against recombinant allergens. A history of atopy, found in 56 to 68% of the patients, has to be checked for. Most of the cases are observed among food-handlers but PCD can also be due to non-edible plants, latex, hydrolysed proteins or animal proteins. Occupational exposure to proteins can thus lead to the development of ICU. Reflecting hypersensitivity to very low concentrations of allergens, investigating ICU therefore requires caution and prick tests should be performed with a diluted form of the causative protein-containing product. Causes are food, especially fruit peel, non-edible plants, cosmetic products, latex, animals.

  9. Electron Device Contact Studies.

    DTIC Science & Technology

    1982-05-01

    from van der Pauw measurements ......................................... 110 5.2 M’odel of a MS contact with an interfacial oxide layer. 116 6.1 I-V...Process ............................ .76 4.3 Diffused Layer Data Determined from van der Pauw 77 Measurements... van der Pauw measurement was performed and a value of diffused layer sheet resistivity was obtained. Junction lapping and staining was then used to

  10. Metal Contacts in Semiconductors.

    DTIC Science & Technology

    1983-11-01

    surfaces, Pnotoelectron spe troscopy, Auger electron spectro- I scopy, Schottky barriers, ohmic contacts, Defects in semiconductors, Cadmium * telluride...Indium phosphide, Gallium arsenide, Gallium Selenide . j 20. ABSTR ACT (roothat ow rees esh " neceay and td..ity by block -. b*w) SThe application of...angstroms. Also, provided one eliminates the systems where cadmium outdiffusion into high work function metals occurs then good agreement between the

  11. Contact stress sensor

    DOEpatents

    Kotovsky, Jack [Oakland, CA

    2012-02-07

    A contact stress sensor includes one or more MEMS fabricated sensor elements, where each sensor element of includes a thin non-recessed portion, a recessed portion and a pressure sensitive element adjacent to the recessed portion. An electric circuit is connected to the pressure sensitive element. The circuit includes a thermal compensator and a pressure signal circuit element configured to provide a signal upon movement of the pressure sensitive element.

  12. Contact stress sensor

    DOEpatents

    Kotovsky, Jack

    2014-02-11

    A method for producing a contact stress sensor that includes one or more MEMS fabricated sensor elements, where each sensor element of includes a thin non-recessed portion, a recessed portion and a pressure sensitive element adjacent to the recessed portion. An electric circuit is connected to the pressure sensitive element. The circuit includes a pressure signal circuit element configured to provide a signal upon movement of the pressure sensitive element.

  13. Contact dermatitis in children

    PubMed Central

    2010-01-01

    Contact dermatitis in pediatric population is a common but (previously) under recognized disease. It is usually divided into the allergic and the irritant forms. The diagnosis is usually obtained with the patch test technique after conducting a thorough medical history and careful physical examination but patch testing in infants may be particularly difficult, and false-positive reactions may occur. This study also provides an overview of the most common allergens in pediatric population and discusses various therapeutic modalities. PMID:20205907

  14. 7 CFR 58.731 - Closing and sealing containers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Closing and sealing containers. 58.731 Section 58.731... Procedures § 58.731 Closing and sealing containers. Pouches, liners, or containers having product contact... means, so as to assure against contamination. Each container in addition to other required...

  15. 75 FR 7368 - Closed Captioning of Video Programming

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-19

    ... COMMISSION 47 CFR Part 79 Closed Captioning of Video Programming AGENCY: Federal Communications Commission... another method by which video programming distributors may provide contact information to the Commission... document FCC 09-109, Closed Captioning of Video Programming, CG Docket No. 05-231, Order, adopted...

  16. Contact problems for a circular plate with sliding fixation at the end face

    NASA Astrophysics Data System (ADS)

    Bazarenko, N. A.

    2014-05-01

    Two mixed elasticity problems of punch indentation into a circular plate placed without clearance in a rigid cylindrical holder with smooth walls are considered. In the first problem, the plate lies without friction on a rigid base, and in the second problem, the plate is rigidly fixed to the base. The problems are solved by a method that was developed for bodies of finite dimensions and is based on the properties of closed systems of orthogonal functions. Each of the problems is reduced to two integral equations, namely, a Volterra integral equation of the first kind for the contact pressure function and a Fredholm integral equation of the first kind for the derivatives of the displacement of the plate upper surface outside the punch. The displacement function is sought as the sum of a trigonometric series and a power function with a root singularity. After truncation, the obtained illposed system of linear algebraic equation has a stable solution. A method for solving Volterra integral equations is given. The contact pressure distribution function and the dimensionless indentation force are determined. Examples of calculation of the plate interaction with the plane punch are given. Contact problems were earlier studied for a rectangle and a circular plate with a stress-free end both without taking account of their fixation [1, 2] and with regard for their fixation [3, 4]. The solution method described here was used to study the interaction of elastic hollow cylinder of finite length with a rigid bandage and a rigid insert [5, 6]. Other papers dealing with contact problems for bodies of finite dimensions, in particular, for a circular plate, should also be mentioned. In these papers, the problems under study were solved by the method of homogeneous solutions [7, 8] and by the method of coupled series-equations [9].

  17. Class Racial Composition, the Friendliness of Interracial Contact and Student Performance.

    ERIC Educational Resources Information Center

    Patchen, Martin; And Others

    This paper presents further evidence bearing on the hypothesis that the academic performance of students is associated more closely with the friendliness or unfriendliness of interracial contact than with the sheer opportunity for interracial contact. In addition, evidence is presented concerning the relationship of interracial contact and of…

  18. Dual contact pogo pin assembly

    DOEpatents

    Hatch, Stephen McGarry

    2016-06-21

    A contact assembly includes a base and a pair of electrical contacts supported by the base. A first end of the first electrical contact corresponds to a first end of the base and is configured to engage a first external conductive circuit element. A first end of the second electrical contact also corresponds to the first end of the base and is configured to engage a second external conductive circuit element. The first contact and the second contact are electrically isolated from one another and configured to compress when engaging an external connector element. The base includes an aperture positioned on a second end of the base outboard of a second end of the first and second electrical contacts. The aperture presents a narrowing shape with a wide mouth distal the electrical contacts and a narrow internal through-hole proximate the electrical contacts.

  19. Dual contact pogo pin assembly

    DOEpatents

    Hatch, Stephen McGarry

    2015-01-20

    A contact assembly includes a base and a pair of electrical contacts supported by the base. A first end of the first electrical contact corresponds to a first end of the base and is configured to engage a first external conductive circuit element. A first end of the second electrical contact also corresponds to the first end of the base and is configured to engage a second external conductive circuit element. The first contact and the second contact are electrically isolated from one another and configured to compress when engaging an external connector element. The base includes an aperture positioned on a second end of the base outboard of a second end of the first and second electrical contacts. The aperture presents a narrowing shape with a wide mouth distal the electrical contacts and a narrow internal through-hole proximate the electrical contacts.

  20. Does Closeness to Someone Who Is Gay, Lesbian, or Bisexual Influence Etiology Beliefs About Homosexuality?

    PubMed

    Chonody, Jill M; Kavanagh, Phillip S; Woodford, Michael R

    2016-12-01

    Research suggests that contact with sexual minorities and etiology beliefs regarding the origins of homosexuality are associated with antigay bias; however, factors related to etiology beliefs have received little empirical attention. Our primary research question is: Does closeness to someone who is gay, lesbian, or bisexual influence etiology beliefs? Students (n = 851) from four U.S. universities completed an anonymous survey, and regression results indicated that contact and closeness were not significantly associated with etiology beliefs. Because both contact and relationship closeness were associated with antigay attitudes, and closeness demonstrated the largest effect, we tested three alternative structural equation models to determine if contact and closeness mediated etiology beliefs. Results suggested that contact and the degree of closeness are indirectly associated with students' etiology beliefs through antigay bias.

  1. Contact mechanics of reverse engineered distal humeral hemiarthroplasty implants.

    PubMed

    Willing, Ryan; King, Graham J W; Johnson, James A

    2015-11-26

    Erosion of articular cartilage is a concern following distal humeral hemiarthroplasty, because native cartilage surfaces are placed in contact with stiff metallic implant components, which causes decreases in contact area and increases in contact stresses. Recently, reverse engineered implants have been proposed which are intended to promote more natural contact mechanics by reproducing the native bone or cartilage shape. In this study, finite element modeling is used in order to calculate changes in cartilage contact areas and stresses following distal humeral hemiarthroplasty with commercially available and reverse engineered implant designs. At the ulna, decreases in contact area were -34±3% (p=0.002), -27±1% (p<0.001) and -14±2% (p=0.008) using commercially available, bone reverse engineered and cartilage reverse engineered designs, respectively. Peak contact stresses increased by 461±57% (p=0.008), 387±127% (p=0.229) and 165±16% (p=0.003). At the radius, decreases in contact area were -21±3% (p=0.013), -13±2% (p<0.006) and -6±1% (p=0.020), and peak contact stresses increased by 75±52% (p>0.999), 241±32% (p=0.010) and 61±10% (p=0.021). Between the three different implant designs, the cartilage reverse engineered design yielded the largest contact areas and lowest contact stresses, but was still unable to reproduce the contact mechanics of the native joint. These findings align with a growing body of evidence indicating that although reverse engineered hemiarthroplasty implants can provide small improvements in contact mechanics when compared with commercially available designs, further optimization of shape and material properties is required in order reproduce native joint contact mechanics.

  2. The sense of body ownership relaxes temporal constraints for multisensory integration

    PubMed Central

    Maselli, Antonella; Kilteni, Konstantina; López-Moliner, Joan; Slater, Mel

    2016-01-01

    Experimental work on body ownership illusions showed how simple multisensory manipulation can generate the illusory experience of an artificial limb as being part of the own-body. This work highlighted how own-body perception relies on a plastic brain representation emerging from multisensory integration. The flexibility of this representation is reflected in the short-term modulations of physiological states and perceptual processing observed during these illusions. Here, we explore the impact of ownership illusions on the temporal dimension of multisensory integration. We show that, during the illusion, the temporal window for integrating touch on the physical body with touch seen on a virtual body representation, increases with respect to integration with visual events seen close but separated from the virtual body. We show that this effect is mediated by the ownership illusion. Crucially, the temporal window for visuotactile integration was positively correlated with participants’ scores rating the illusory experience of owning the virtual body and touching the object seen in contact with it. Our results corroborate the recently proposed causal inference mechanism for illusory body ownership. As a novelty, they show that the ensuing illusory causal binding between stimuli from the real and fake body relaxes constraints for the integration of bodily signals. PMID:27485049

  3. A Parallel Algorithm for Contact in a Finite Element Hydrocode

    SciTech Connect

    Pierce, Timothy G.

    2003-06-01

    A parallel algorithm is developed for contact/impact of multiple three dimensional bodies undergoing large deformation. As time progresses the relative positions of contact between the multiple bodies changes as collision and sliding occurs. The parallel algorithm is capable of tracking these changes and enforcing an impenetrability constraint and momentum transfer across the surfaces in contact. Portions of the various surfaces of the bodies are assigned to the processors of a distributed-memory parallel machine in an arbitrary fashion, known as the primary decomposition. A secondary, dynamic decomposition is utilized to bring opposing sections of the contacting surfaces together on the same processors, so that opposing forces may be balanced and the resultant deformation of the bodies calculated. The secondary decomposition is accomplished and updated using only local communication with a limited subset of neighbor processors. Each processor represents both a domain of the primary decomposition and a domain of the secondary, or contact, decomposition. Thus each processor has four sets of neighbor processors: (a) those processors which represent regions adjacent to it in the primary decomposition, (b) those processors which represent regions adjacent to it in the contact decomposition, (c) those processors which send it the data from which it constructs its contact domain, and (d) those processors to which it sends its primary domain data, from which they construct their contact domains. The latter three of these neighbor sets change dynamically as the simulation progresses. By constraining all communication to these sets of neighbors, all global communication, with its attendant nonscalable performance, is avoided. A set of tests are provided to measure the degree of scalability achieved by this algorithm on up to 1024 processors. Issues related to the operating system of the test platform which lead to some degradation of the results are analyzed. This algorithm

  4. Penetrators for delivering Scientific equipment to minor bodies by flying-pass missions.

    NASA Astrophysics Data System (ADS)

    Bagrov, Alexander; Martynov, Maxim; Pichkhadze, Konstantin M.; Dolgopolov, Vladimir; Sysoev, Valentin

    Many space missions are planned to have close encounters with Solar system minor bodies as a pass-fly. Short time of such close encounters were effectively used for photographing of these bodies, i.e. for distant investigations only because of large velocities of the encounter. We propose to use high-velocity penetrators to provide contact investigations of the minor bodies in situ. These devices were designed by Lavochkin Association for lunar missions. They were designed for long lived scientific equipment to be placed under surface up to depth 2...3 m. Penetrators could survive under 500 g shock, so the contact velocity was from 90 to 250 m/s, so each of them had booster engine to decelerate orbital velocity. As flying-pass velocity near minor body can be more then 10 km/s, penetrators would hit target at speed above 1 km/s and successfully bear 1500 g. To do so we propose to fulfill whole internal space inside penetrator with distilled water and froze it to temperature - 80°C or lower. At this temperature water ice is as hard as steel, so penetrator will plunge into target like armour-piercing shell. After landing protective ice will be evaporated (particularly due to heating from collision) and all sensitive mechanics will be set free.

  5. Contact dermatitis in printing tradesmen.

    PubMed

    Nethercott, J R; Nosal, R

    1986-05-01

    During a 2-year period in Toronto, Canada, 21 printing tradesmen with contact dermatitis were evaluated. 67% had allergic contact dermatitis; 29% due to ultraviolet-cured ink components. Irritant contact dermatitis accounted for 37% of the cases. The prognosis in printing tradesmen with contact dermatitis is guarded, except for those with allergic contact dermatitis due to UV-cured components, as the tradesmen who were sensitized to other contactants eventually left the trade. Offset lithography was associated with the problem in 18 of the 21 cases. A brief outline is given of the printing processes in common use.

  6. Workplace Safety and Health: Body Art

    MedlinePlus

    ... Publications and Products Programs Contact NIOSH NIOSH BODY ART Language: English Español (Spanish) Recommend on Facebook Tweet Share Compartir Creating living art is a unique talent, but it puts tattooists ...

  7. Elastic contact mechanics: percolation of the contact area and fluid squeeze-out.

    PubMed

    Persson, B N J; Prodanov, N; Krick, B A; Rodriguez, N; Mulakaluri, N; Sawyer, W G; Mangiagalli, P

    2012-01-01

    The dynamics of fluid flow at the interface between elastic solids with rough surfaces depends sensitively on the area of real contact, in particular close to the percolation threshold, where an irregular network of narrow flow channels prevails. In this paper, numerical simulation and experimental results for the contact between elastic solids with isotropic and anisotropic surface roughness are compared with the predictions of a theory based on the Persson contact mechanics theory and the Bruggeman effective medium theory. The theory predictions are in good agreement with the experimental and numerical simulation results and the (small) deviation can be understood as a finite-size effect. The fluid squeeze-out at the interface between elastic solids with randomly rough surfaces is studied. We present results for such high contact pressures that the area of real contact percolates, giving rise to sealed-off domains with pressurized fluid at the interface. The theoretical predictions are compared to experimental data for a simple model system (a rubber block squeezed against a flat glass plate), and for prefilled syringes, where the rubber plunger stopper is lubricated by a high-viscosity silicon oil to ensure functionality of the delivery device. For the latter system we compare the breakloose (or static) friction, as a function of the time of stationary contact, to the theory prediction.

  8. Self-closing shielded container for use with radioactive materials

    DOEpatents

    Smith, J.E.

    A container for storage of radioactive material comprises a container body and a closure member. The closure member is coupled to the container body to enable the closure body to move automatically from a first position (e.g., closed) to a second position (open).

  9. Self-closing shielded container for use with radioactive materials

    DOEpatents

    Smith, J.E.

    1984-10-16

    A container is described for storage of radioactive material comprising a container body and a closure member. The closure member being coupled to the container body to enable the closure body to move automatically from a first position (e.g., closed) to a second position (open). 1 fig.

  10. Self-closing shielded container for use with radioactive materials

    DOEpatents

    Smith, Jay E.

    1984-01-01

    A container for storage of radioactive material comprising a container body nd a closure member. The closure member being coupled to the container body to enable the closure body to move automatically from a first position (e.g., closed) to a second position (open).

  11. Closing the Advising Session.

    ERIC Educational Resources Information Center

    Jeon, Mihyon

    2003-01-01

    This study investigates closing patterns for an institutional conversation in an ELP (English Language Program) at a university in the United States, noting the relationship between the closing patterns of the participants and their level of proficiency in English. By indicating that ESL learners, especially beginners, face difficulty in closing…

  12. Surviving a School Closing

    ERIC Educational Resources Information Center

    De Witt, Peter M.; Moccia, Josephine

    2011-01-01

    When a beloved school closes, community emotions run high. De Witt and Moccia, administrators in the Averill Park School District in upstate New York, describe how their district navigated through parents' anger and practical matters in closing a small neighborhood elementary school and transferring all its students to another school. With a group…

  13. Nonaxisymmetric Body Supersonic, Aerodynamic Prediction

    DTIC Science & Technology

    1987-08-01

    wing - tail configuration are compared in Figure 27. CN comparisons are good. C. is a sensitive computation for xcp close to x’. 7.2...Analytical and Experimental Supersonic Aerodynamic Characteristics of a Forward Control Missile , AIAA Paper No. 81-0398, AIAA 19th Aerospace Sciences...body diameter. The next computational example is for a body- wing - tail configuration from Reference 32 A body-alone comparison has been made earlier in

  14. Adhesive Contact Sweeper

    NASA Technical Reports Server (NTRS)

    Patterson, Jonathan D.

    1993-01-01

    Adhesive contact sweeper removes hair and particles vacuum cleaner leaves behind, without stirring up dust. Also cleans loose rugs. Sweeper holds commercially available spools of inverted adhesive tape. Suitable for use in environments in which air kept free of dust; optics laboratories, computer rooms, and areas inhabited by people allergic to dust. For carpets, best used in tandem with vacuum cleaner; first pass with vacuum cleaner removes coarse particles, and second pass with sweeper extracts fine particles. This practice extends useful life of adhesive spools.

  15. Adhesion in hydrogel contacts.

    PubMed

    Torres, J R; Jay, G D; Kim, K-S; Bothun, G D

    2016-05-01

    A generalized thermomechanical model for adhesion was developed to elucidate the mechanisms of dissipation within the viscoelastic bulk of a hyperelastic hydrogel. Results show that in addition to the expected energy release rate of interface formation, as well as the viscous flow dissipation, the bulk composition exhibits dissipation due to phase inhomogeneity morphological changes. The mixing thermodynamics of the matrix and solvent determines the dynamics of the phase inhomogeneities, which can enhance or disrupt adhesion. The model also accounts for the time-dependent behaviour. A parameter is proposed to discern the dominant dissipation mechanism in hydrogel contact detachment.

  16. Adhesion in hydrogel contacts

    NASA Astrophysics Data System (ADS)

    Torres, J. R.; Jay, G. D.; Kim, K.-S.; Bothun, G. D.

    2016-05-01

    A generalized thermomechanical model for adhesion was developed to elucidate the mechanisms of dissipation within the viscoelastic bulk of a hyperelastic hydrogel. Results show that in addition to the expected energy release rate of interface formation, as well as the viscous flow dissipation, the bulk composition exhibits dissipation due to phase inhomogeneity morphological changes. The mixing thermodynamics of the matrix and solvent determines the dynamics of the phase inhomogeneities, which can enhance or disrupt adhesion. The model also accounts for the time-dependent behaviour. A parameter is proposed to discern the dominant dissipation mechanism in hydrogel contact detachment.

  17. Contact dermatitis to methylisothiazolinone*

    PubMed Central

    Scherrer, Maria Antonieta Rios; Rocha, Vanessa Barreto; Andrade, Ana Regina Coelho

    2015-01-01

    Methylisothiazolinone (MI) is a preservative found in cosmetic and industrial products. Contact dermatitis caused by either methylchloroisothiazolinone/methylisothiazolinone (MCI/MI or Kathon CG) or MI has shown increasing frequency. The latter is preferably detected through epicutaneous testing with aqueous MI 2000 ppm, which is not included in the Brazilian standard tray. We describe a series of 23 patients tested using it and our standard tray. A case with negative reaction to MCI/MI and positive to MI is emphasized. PMID:26734880

  18. Contact dermatitis in Nigeria.

    PubMed

    Olumide, Y M

    1985-05-01

    Nickel is the most important sensitizer in Lagos, with an incidence of 12.3% of 453 patients tested. There was no sex difference, as the wearing of necklaces and bracelets was equally fashionable among both sexes. Housewife eczema is not common, probably because of hardening. Dermatitis from additives in the processing of leather and rubber footwear was the next most common. Chromate sensitivity comes usually from leather or cement. Cultural and climatic factors are mainly responsible for differences in the incidence of contact dermatitis found in Lagos from other countries.

  19. Contact Control, Version 1

    SciTech Connect

    von Sternberg, Alex

    2016-07-21

    The contact control code is a generalized force control scheme meant to interface with a robotic arm being controlled using the Robot Operating System (ROS). The code allows the user to specify a control scheme for each control dimension in a way that many different control task controllers could be built from the same generalized controller. The input to the code includes maximum velocity, maximum force, maximum displacement, and a control law assigned to each direction and the output is a 6 degree of freedom velocity command that is sent to the robot controller.

  20. Comparation of effectiveness of silicone hydrogel contact lens and hydrogel contact lens in patients after LASEK

    PubMed Central

    Xie, Wen-Juan; Zeng, Jin; Cui, Ying; Li, Juan; Li, Zhong-Ming; Liao, Wei-Xiong; Yang, Xiao-Hong

    2015-01-01

    AIM To conduct a comparative study of effectiveness of silicone hydrogel contact lens and hydrogel contact lens, which are used in patients after laser-assisted subepithelial keratomileusis (LASEK). METHODS Sixty-three patients (121 eyes) with a spherical equivalent ≤-5.0 D were chosen after undergoing LASEK in 2012 at Guangdong General Hospital. They were randomly divided into 2 groups. The silicone hydrogel group included 32 cases (61 eyes) that wore silicone hydrogel contact lenses for 4-6d after the operation, while the hydrogel group included 31 cases (60 eyes) who wore hydrogel contact lenses for 4-6d after the operation. Patients' self-reported postoperative symptoms (including pain, photophobia, tears, and foreign body sensation) were evaluated. The healing time of the corneal epithelium, the visual acuity of patients without contact lens after epithelial healing, and the incidence of delayed corneal epithelial shedding were also assessed. The follow-up time was 1mo. RESULTS Postoperative symptoms were milder in the silicone hydrogel group than in the hydrogel group. There were significant differences in pain, foreign body sensation, and photophobia between the 2 groups (P<0.05), although there was no significant difference in postoperative tearing (P>0.05). The healing time of the corneal epithelium in the silicone hydrogel lens group was markedly shorter than that in the hydrogel group (4.07±0.25 vs 4.33±0.82d, t=2.43, P=0.02). Visual acuity without contact lenses after healing of the corneal epithelium was better in the silicone hydrogel group compared with the hydrogel group (χ2=7.76, P=0.02). There was no significant difference in the occurrence of delayed corneal epithelial shedding between the 2 groups (P>0.05). CONCLUSION Patients with LASEK using silicon hydrogel contact lenses had less discomfort and shorter corneal epithelial healing time compared with those using hydrogel contact lenses, suggesting that silicon hydrogel contact lenses may

  1. [Water contacts in dracunculiasis-infected patients in Mali: transmission risk activities].

    PubMed

    Etard, J F; Kodio, B; Traoré, S; Audibert, M

    2002-11-01

    The aim of this study lies in the identification of human activities responsible for the transmission of the Guinea worm in an endemic village in Diema Region in Mali. Human water contacts observations started after a census followed by the implementation of a bi-monthly notification system, carried out from May to November 1993. Water contacts were noticed and observed from the mid-July to the end of November of the same year. The first case of dracunculiasis observed was randomly drawn out of a list of the families with obvious cases. The patent case activities involving either surface water, traditional wells or bore-hole water were recorded for 10 consecutive days. During this observation period, contacts made by other patients with the same water sources were also recorded. After 14 days, the case list was updated and a new case selected out of families previously selected. This cycle was repeated until the end of the study period. A "contact at risk for transmission" was defined by a close correspondence between the location of the worm's emergence and the surface of the skin exposed to water, within two weeks following emergence. Contacts were described according to water sources, activities in relation to water, date, gender and age. Observations were made on 103 patients who had 2506 activities in relation with a water body: 1132 of these activities implied a skin contact with the water. Only 133 (9%) of these water contacts were at risk for transmission, 75% took place during the months of August and September, 80% were related to surface waters and 20% to traditional wells. Woman household activities and boys games were the major activities at risk, in contrast to economic activities (watering cattle). The low proportion of "at risk activities" evaluated in this study suggests that a small number of water contacts is sufficient to maintain the transmission. The case implications of the current eradication strategy might not be sufficient alone to break

  2. Contact Lenses in the Laboratory.

    ERIC Educational Resources Information Center

    Kingston, David W.

    1981-01-01

    Summarizes results of a three-item questionnaire returned by 43 Michigan institutions expressing views on wearing contact lenses in chemical laboratories. Questions focused on eye protection, type of protection, and use of contact lenses. (SK)

  3. Control of mechanical systems with rolling contacts: Applications to robotics

    NASA Astrophysics Data System (ADS)

    Sarkar, Nilanjan

    1993-01-01

    The problems of modeling and control of mechanical dynamic systems subject to rolling contacts are investigated. There are two important theoretical contributions in this dissertation. First, contact kinematic relationships up to second order are developed for two rigid bodies in point contact. These equations relate gross rigid body motion to the changes in the positions of the points of contact. Second, a unified approach to the control of mechanical systems subject to both holonomic and nonholonomic constraints is proposed. The basic approach is to extend the state-space to include, in the addition to the generalized coordinates and velocities, contact coordinates which describe the displacements of the contact points and their derivatives. This redundant state-space formulation provides a convenient way to specify output equations to control contact motion. The control problem is formulated as an affine nonlinear problem and a differential-geometric, control-theoretic approach is used to decouple and linearize such systems. It is shown that such a system, even though not input-state linearizable, is input-output linearizable. Further, the zero dynamics of such a system is shown to be Lagrange stable. The proposed methodology is applied to three different robotic systems: (1) wheeled mobile robots; (2) two arms manipulating an object with rolling contact between each arm and the object; and (3) a single robot arm maintaining controlled contact against a moving environment. In each case, a nonlinear controller is designed to achieve the desired performances. For mobile robots, a new control algorithm called dynamic path following is proposed and shown to be quite effective and robust. In the context of two arm manipulation, grasp adaptation through the control of contact motion is demonstrated. Maintaining rolling contact with a moving surface is formulated as an acatastatic system. The proposed scheme involves simultaneously controlling interaction forces as

  4. Closed ecological life-support systems and their applications

    NASA Astrophysics Data System (ADS)

    Gitelson, Josef I.

    The advent of man-made closed ecosystems (CES) is a solution of the fundamental problem-egress of humans beyond the Earth's biosphere, providing biological basis for exploitation of Space and celestial bodies. Yet, before proceeding to these ambitious project elements of closed life-support biotechnologies, there can be found diverse applications on Earth in human settlements providing for high quality of life under extreme environment conditions: high latitudes, deserts, mountains and industrially polluted areas. This presentation considers these variations of terrestrial applications of CELSS technologies. The version of CES under development is based on making direct use of the light energy in plant photosynthesis. In this case life support of one man on the Earth orbit requires solar light collected from 5-10m2. Among terrestrial applications of prime importance is the development of an ecohome designed to provide people with a high quality of life in Arctic and Antarctic territories. The developed technology of cascade employment of energy makes possible (expending 10-15 kw of installed power per a house-3-5 member family) to provide for: permanent supply of fresh vitamin-full vegetables, absorption and processing oaf excreta, purification of water and air in the living quarters, habitual colour and light conditions in the premises in winter making up to sensorial deprivation and, finally, psychological comfort of close contact with the plants during the long polar night. Ecohabitat based on the technology described in realistic today and depends only on the energy available and the resolution and readiness (sagacity) of the decision-makers to be committed with ecohome assigning. The ecological and economical significance of construction of ecohabitats for the northern territories of Canada, Alaska and Russia is apparent. This principle can be used (with considerable economy of energy and construction costs) to maintain normal partial pressure of oxygen inside

  5. Orbital-Period Variations and Photometric Analysis for the Neglected Contact Binary EH Cancri

    NASA Astrophysics Data System (ADS)

    Yang, Y.-G.; Shao, Z.-Y.; Pan, H.-J.; Yin, X.-G.

    2011-08-01

    New CCD photometry for the eclipsing binary EH Cnc was made from 2009 to 2011, and five new eclipsing times are presented. Through using the updated Wilson-Devinney code, we first deduced the photometric solution at χ2 = 0.9906. The results show that EH Cnc is a W-type contact binary, whose mass ratio and overcontact degree are q = 2.51 (± 0.02) and f = 27.7% (± 3.4%), respectively. By analyzing the O - C curve of EH Cnc, it is found that there exists a secular-period decrease with a cyclic variation. The period and semiamplitude are and A = 0.0032 days (± 0.0003 days), respectively. This kind of cyclic variation may probably be attributed to the light-time effect via the presence of an unseen third body, because the values of ΔQ1,2 are much smaller than the typical one for close binaries. The orbital period of EH Cnc continuously decreases at a rate of . This kind of secular period decrease may result from mass transfer from the primary to the secondary, accompanied by mass and angular momentum loss from the system. With the orbital period decreasing, the inner and outer Roche lobes will shrink, causing the contact degree to increase. Finally, binaries with decreasing periods, such as EH Cnc, will evolve into deep-contact configurations.

  6. Polyurethane toilet seat contact dermatitis.

    PubMed

    Turan, Hakan; Saricaoğlu, Hayriye; Turan, Ayşegül; Tunali, Sükran

    2011-01-01

    Polyurethane chemicals are produced by the reaction of isocyanates and they may cause allergic contact dermatitis or precipitate asthma attacks. Contact dermatitis to polyurethane toilet seat has not been reported before. Herein we present a case of allergic contact dermatitis to polyurethane toilet seat.

  7. Allergic Contact Dermatitis

    PubMed Central

    Nelson, Jenny L.

    2010-01-01

    Epicutaneous patch testing is the gold standard method for the diagnosis of allergic contact dermatitis. Despite this knowledge, many clinical dermatologists do not offer patch testing in their offices or offer testing with only a limited number of allergens. Introduced in 1995, the Thin-Layer Rapid Use Epicutaneous Test originally contained 23 allergens and one control. In 2007, five additional allergens were added. This United States Food and Drug Administration-approved patch testing system made patch testing more convenient, and after its introduction, more dermatologists offered patch testing services. However, the number of allergens in the Thin-Layer Rapid Use Epicutaneous Test remains relatively low. Every two years, the North American Contact Dermatitis Group collects and reports the data from patch testing among its members to a standardized series of allergens. In 2005-2006, the Group used a series of 65 allergens. Of the top 30 allergens reported in 2005-2006, 10 were not included in the Thin-Layer Rapid Use Epicutaneous Test. Knowledge of and testing for additional allergens such as these may increase patch testing yield. PMID:20967194

  8. Contact position sensor using constant contact force control system

    NASA Technical Reports Server (NTRS)

    Sturdevant, Jay (Inventor)

    1995-01-01

    A force control system (50) and method are provided for controlling a position contact sensor (10) so as to produce a constant controlled contact force therewith. The system (50) includes a contact position sensor (10) which has a contact probe (12) for contacting the surface of a target to be measured and an output signal (V.sub.o) for providing a position indication thereof. An actuator (30) is provided for controllably driving the contact position sensor (10) in response to an actuation control signal (I). A controller (52) receives the position indication signal (V.sub.o) and generates in response thereto the actuation control signal (I) so as to provide a substantially constant selective force (F) exerted by the contact probe (12). The actuation drive signal (I) is generated further in response to substantially linear approximation curves based on predetermined force and position data attained from the sensor (10) and the actuator (30).

  9. Dynamic contact angle analysis of silicone hydrogel contact lenses.

    PubMed

    Read, Michael Leonard; Morgan, Philip Bruce; Kelly, Jeremiah Michael; Maldonado-Codina, Carole

    2011-07-01

    Contact angle measurements are used to infer the clinical wetting characteristics of contact lenses. Such characterization has become more commonplace since the introduction of silicone hydrogel contact lens materials, which have been associated with reduced in vivo wetting due to the inclusion of siloxane-containing components. Using consistent methodology and a single investigator, advancing and receding contact angles were measured for 11 commercially available silicone hydrogel contact lens types with a dynamic captive bubble technique employing customized, fully automated image analysis. Advancing contact angles were found to range between 20° and 72° with the lenses falling into six statistically discrete groupings. Receding contact angles fell within a narrower range, between 17° and 22°, with the lenses segregated into three groups. The relationship between these laboratory measurements and the clinical performance of the lenses requires further investigation.

  10. Coating with colloids by receding contact line

    NASA Astrophysics Data System (ADS)

    Berteloot, Guillaume; Laurent, Limat; Francois, Lequeux; Pham, Chi-Tuong; Daerr, Adrian; Receveur, Mathieu

    2008-11-01

    Many coating processes use evaporation. But such coatings are usually inhomogeneous because of the evaporation singularity at the contact line. We are thus investigating the effect of this singularity on dip-coating. In dip-coating, two flows are in competition: one inwards due to the receding contact line, the other outwards due to evaporation, and the equiibrium of thes flows predicts the thicknes of the deposit. There are two dip-coating regimes: one controlled by evaporation, and the known Landau-Levich regime. A minimum deposit thickness is expected between these two regimes. Using different microscopy techniques, we found out that there was a minimum in the deposit thickness, but that the actual mesoscopic order strongly varies depending on the contact line velocity. In the stick-slip regime, we can also link the spatial frequency of the stick-slip motion with the contact line velocity. Eventually, the thinnest deposits exhibits iridescence, which means that we are close to a photonic cristal structure.

  11. Thin Silicon MEMS Contact-Stress Sensor

    SciTech Connect

    Kotovsky, J; Tooker, A; Horsley, D A

    2009-12-07

    This work offers the first, thin, MEMS contact-stress (CS) sensor capable of accurate in situ measruement of time-varying, contact-stress between two solid interfaces (e.g. in vivo cartilage contact-stress and body armor dynamic loading). This CS sensor is a silicon-based device with a load sensitive diaphragm. The diaphragm is doped to create piezoresistors arranged in a full Wheatstone bridge. The sensor is similar in performance to established silicon pressure sensors, but it is reliably produced to a thickness of 65 {micro}m. Unlike commercial devices or other research efforts, this CS sensor, including packaging, is extremely thin (< 150 {micro}m fully packaged) so that it can be unobtrusively placed between contacting structures. It is built from elastic, well-characterized materials, providing accurate and high-speed (50+ kHz) measurements over a potential embedded lifetime of decades. This work explored sensor designs for an interface load range of 0-2 MPa; however, the CS sensor has a flexible design architecture to measure a wide variety of interface load ranges.

  12. Birth mother grief and the challenge of adoption reunion contact.

    PubMed

    March, Karen

    2014-07-01

    A large body of work exists on the grief expressed by birth mothers over the loss of their children to adoption. Less is known about the grief emotions that surface when these women are contacted by adopted adults who seek contact relationships. The themes of mourning, grief, and bereavement that emerged in the qualitative interview data of 33 reunited birth mothers indicate more attention be given to these social psychological processes. Suggestions for future research possibilities and implications for clinical practice are explored.

  13. BCL::contact-low confidence fold recognition hits boost protein contact prediction and de novo structure determination.

    PubMed

    Karakaş, Mert; Woetzel, Nils; Meiler, Jens

    2010-02-01

    Knowledge of all residue-residue contacts within a protein allows determination of the protein fold. Accurate prediction of even a subset of long-range contacts (contacts between amino acids far apart in sequence) can be instrumental for determining tertiary structure. Here we present BCL::Contact, a novel contact prediction method that utilizes artificial neural networks (ANNs) and specializes in the prediction of medium to long-range contacts. BCL::Contact comes in two modes: sequence-based and structure-based. The sequence-based mode uses only sequence information and has individual ANNs specialized for helix-helix, helix-strand, strand-helix, strand-strand, and sheet-sheet contacts. The structure-based mode combines results from 32-fold recognition methods with sequence information to a consensus prediction. The two methods were presented in the 6(th) and 7(th) Critical Assessment of Techniques for Protein Structure Prediction (CASP) experiments. The present work focuses on elucidating the impact of fold recognition results onto contact prediction via a direct comparison of both methods on a joined benchmark set of proteins. The sequence-based mode predicted contacts with 42% accuracy (7% false positive rate), while the structure-based mode achieved 45% accuracy (2% false positive rate). Predictions by both modes of BCL::Contact were supplied as input to the protein tertiary structure prediction program Rosetta for a benchmark of 17 proteins with no close sequence homologs in the protein data bank (PDB). Rosetta created higher accuracy models, signified by an improvement of 1.3 A on average root mean square deviation (RMSD), when driven by the predicted contacts. Further, filtering Rosetta models by agreement with the predicted contacts enriches for native-like fold topologies.

  14. Classification of domain movements in proteins using dynamic contact graphs.

    PubMed

    Taylor, Daniel; Cawley, Gavin; Hayward, Steven

    2013-01-01

    A new method for the classification of domain movements in proteins is described and applied to 1822 pairs of structures from the Protein Data Bank that represent a domain movement in two-domain proteins. The method is based on changes in contacts between residues from the two domains in moving from one conformation to the other. We argue that there are five types of elemental contact changes and that these relate to five model domain movements called: "free", "open-closed", "anchored", "sliding-twist", and "see-saw." A directed graph is introduced called the "Dynamic Contact Graph" which represents the contact changes in a domain movement. In many cases a graph, or part of a graph, provides a clear visual metaphor for the movement it represents and is a motif that can be easily recognised. The Dynamic Contact Graphs are often comprised of disconnected subgraphs indicating independent regions which may play different roles in the domain movement. The Dynamic Contact Graph for each domain movement is decomposed into elemental Dynamic Contact Graphs, those that represent elemental contact changes, allowing us to count the number of instances of each type of elemental contact change in the domain movement. This naturally leads to sixteen classes into which the 1822 domain movements are classified.

  15. Closed Large Cell Clouds

    Atmospheric Science Data Center

    2013-04-19

    article title:  Closed Large Cell Clouds in the South Pacific     ... unperturbed by cyclonic or frontal activity. When the cell centers are cloudy and the main sinking motion is concentrated at cell ...

  16. A contact map matching approach to protein structure similarity analysis.

    PubMed

    de Melo, Raquel C; Lopes, Carlos Eduardo R; Fernandes, Fernando A; da Silveira, Carlos Henrique; Santoro, Marcelo M; Carceroni, Rodrigo L; Meira, Wagner; Araújo, Arnaldo de A

    2006-06-30

    We modeled the problem of identifying how close two proteins are structurally by measuring the dissimilarity of their contact maps. These contact maps are colored images, in which the chromatic information encodes the chemical nature of the contacts. We studied two conceptually distinct image-processing algorithms to measure the dissimilarity between these contact maps; one was a content-based image retrieval method, and the other was based on image registration. In experiments with contact maps constructed from the protein data bank, our approach was able to identify, with greater than 80% precision, instances of monomers of apolipoproteins, globins, plastocyanins, retinol binding proteins and thioredoxins, among the monomers of Protein Data Bank Select. The image registration approach was only slightly more accurate than the content-based image retrieval approach.

  17. Lam6 Regulates the Extent of Contacts between Organelles

    PubMed Central

    Elbaz-Alon, Yael; Eisenberg-Bord, Michal; Shinder, Vera; Stiller, Sebastian Berthold; Shimoni, Eyal; Wiedemann, Nils; Geiger, Tamar; Schuldiner, Maya

    2015-01-01

    Summary Communication between organelles is crucial for eukaryotic cells to function as one coherent unit. An important means of communication is through membrane contact sites, where two organelles come into close proximity allowing the transport of lipids and small solutes between them. Contact sites are dynamic in size and can change in response to environmental or cellular stimuli; however, how this is regulated has been unclear. Here, we show that Saccharomyces cerevisiae Lam6 resides in several central contact sites: ERMES (ER/mitochondria encounter structure), vCLAMP (vacuole and mitochondria patch), and NVJ (nuclear vacuolar junction). We show that Lam6 is sufficient for expansion of contact sites under physiological conditions and necessary for coordination of contact site size. Given that Lam6 is part of a large protein family and is conserved in vertebrates, our work opens avenues for investigating the underlying principles of organelle communication. PMID:26119743

  18. Contact sensing from force measurements

    NASA Technical Reports Server (NTRS)

    Bicchi, Antonio; Salisbury, J. K.; Brock, David L.

    1993-01-01

    This article addresses contact sensing (i.e., the problem of resolving the location of a contact, the force at the interface, and the moment about the contact normals). Called 'intrinsic' contact sensing for the use of internal force and torque measurements, this method allows for practical devices that provide simple, relevant contact information in practical robotic applications. Such sensors have been used in conjunction with robot hands to identify objects, determine surface friction, detect slip, augment grasp stability, measure object mass, probe surfaces, and control collision and for a variety of other useful tasks. This article describes the theoretical basis for their operation and provides a framework for future device design.

  19. Closed Circular Chains

    ERIC Educational Resources Information Center

    Caglayan, Günhan

    2016-01-01

    A Steiner chain is defined as the sequence of n circles that are all tangent to two given non-intersecting circles. A closed chain, in particular, is one in which every circle in the sequence is tangent to the previous and next circles of the chain. In a closed Steiner chain the first and the "n"th circles of the chain are also tangent…

  20. Active alignment/contact verification system

    DOEpatents

    Greenbaum, William M.

    2000-01-01

    A system involving an active (i.e. electrical) technique for the verification of: 1) close tolerance mechanical alignment between two component, and 2) electrical contact between mating through an elastomeric interface. For example, the two components may be an alumina carrier and a printed circuit board, two mating parts that are extremely small, high density parts and require alignment within a fraction of a mil, as well as a specified interface point of engagement between the parts. The system comprises pairs of conductive structures defined in the surfaces layers of the alumina carrier and the printed circuit board, for example. The first pair of conductive structures relate to item (1) above and permit alignment verification between mating parts. The second pair of conductive structures relate to item (2) above and permit verification of electrical contact between mating parts.

  1. Determination of the contact line for protective goggles

    SciTech Connect

    Boyarov, M.M.; Kaiyumov, Kh.M.; Larina, Zh.G.; Zhuk, G.V.

    1982-11-01

    The contact line of protective goggles of closed type should correspond to the anthropometric structure of the face and head, whose dimensional characteristics vary from one person to another. It is therefore desirable to determine average statistical values characterizing the line of contact. Up to now, the parameters of the contact line have been determined from practical experience in the design of protective goggles in view of the absence of scientific data on the detailed structure of the face and head. This organization has devised a special stereophotogrammetric apparatus and a method of defining the parameters required in the design of means of protecting the eyes and face.

  2. Mitochondria-organelle contact sites: the plot thickens.

    PubMed

    Elbaz-Alon, Yael

    2017-04-15

    Membrane contact sites (MCSs) are areas of close apposition between the membranes of two different organelles that enable non-vesicular transfer of ions and lipids. Recent studies reveal that mitochondria maintain contact sites with organelles other than the endoplasmic reticulum such as the vacuole, plasma membrane and peroxisomes. This review focuses on novel findings achieved mainly in yeast regarding tethers, function and regulation of mitochondria-organelle contact sites. The emerging network of MCSs linking virtually all cellular organelles is highly dynamic and integrated with cellular metabolism.

  3. Capteur Tridimensionnel Sans Contact

    NASA Astrophysics Data System (ADS)

    Magnant, D.

    1986-07-01

    Three-dimensionnal measurements on human body using a scanning laser beam. The active optical apparatus principle and the image data processing giving three dimensional informations of complex forms is presented. The output is given in terms of one or several files of real coordinates. The basic components of this system are : A light-sheet which is generated by a laser source and, the optical sensors (cameras) with corresponding hard-soft extractor; This 3D sensorial system is especially adapted to partial or total acquisitions of body coordinates. The main advantages are : - Vision and measurement capability of complete accessible contours without shadow areas. - The real time data acquisition and scanning of the object in a few seconds. - The access to distance measurements between significant points. - The presently obtained accuracy is better than 1/1000 in relatives units and lower than one MM absolute. - Physically stuck markers on body are not necessary. - The monochromaticity of the laser light source allows the use of a color filter over the detector (camera) for ambient light rejection. - The fully programmable capability for any use, allows the adaptation to a large variety of particular cases. - The hardware open system offers many options. - The hard-soft tool is designed for auto-calibration operation. - The system offers easy connection to a host computer or a production robot.

  4. Equilibrium contact angle or the most-stable contact angle?

    PubMed

    Montes Ruiz-Cabello, F J; Rodríguez-Valverde, M A; Cabrerizo-Vílchez, M A

    2014-04-01

    It is well-established that the equilibrium contact angle in a thermodynamic framework is an "unattainable" contact angle. Instead, the most-stable contact angle obtained from mechanical stimuli of the system is indeed experimentally accessible. Monitoring the susceptibility of a sessile drop to a mechanical stimulus enables to identify the most stable drop configuration within the practical range of contact angle hysteresis. Two different stimuli may be used with sessile drops: mechanical vibration and tilting. The most stable drop against vibration should reveal the changeless contact angle but against the gravity force, it should reveal the highest resistance to slide down. After the corresponding mechanical stimulus, once the excited drop configuration is examined, the focus will be on the contact angle of the initial drop configuration. This methodology needs to map significantly the static drop configurations with different stable contact angles. The most-stable contact angle, together with the advancing and receding contact angles, completes the description of physically realizable configurations of a solid-liquid system. Since the most-stable contact angle is energetically significant, it may be used in the Wenzel, Cassie or Cassie-Baxter equations accordingly or for the surface energy evaluation.

  5. Reducing contact resistance in graphene devices through contact area patterning.

    PubMed

    Smith, Joshua T; Franklin, Aaron D; Farmer, Damon B; Dimitrakopoulos, Christos D

    2013-04-23

    Performance of graphene electronics is limited by contact resistance associated with the metal-graphene (M-G) interface, where unique transport challenges arise as carriers are injected from a 3D metal into a 2D-graphene sheet. In this work, enhanced carrier injection is experimentally achieved in graphene devices by forming cuts in the graphene within the contact regions. These cuts are oriented normal to the channel and facilitate bonding between the contact metal and carbon atoms at the graphene cut edges, reproducibly maximizing "edge-contacted" injection. Despite the reduction in M-G contact area caused by these cuts, we find that a 32% reduction in contact resistance results in Cu-contacted, two-terminal devices, while a 22% reduction is achieved for top-gated graphene transistors with Pd contacts as compared to conventionally fabricated devices. The crucial role of contact annealing to facilitate this improvement is also elucidated. This simple approach provides a reliable and reproducible means of lowering contact resistance in graphene devices to bolster performance. Importantly, this enhancement requires no additional processing steps.

  6. Contact angle and local wetting at contact line.

    PubMed

    Li, Ri; Shan, Yanguang

    2012-11-06

    This theoretical study was motivated by recent experiments and theoretical work that had suggested the dependence of the static contact angle on the local wetting at the triple-phase contact line. We revisit this topic because the static contact angle as a local wetting parameter is still not widely understood and clearly known. To further clarify the relationship of the static contact angle with wetting, two approaches are applied to derive a general equation for the static contact angle of a droplet on a composite surface composed of heterogeneous components. A global approach based on the free surface energy of a thermodynamic system containing the droplet and solid surface shows the static contact angle as a function of local surface chemistry and local wetting state at the contact line. A local approach, in which only local forces acting on the contact line are considered, results in the same equation. The fact that the local approach agrees with the global approach further demonstrates the static contact angle as a local wetting parameter. Additionally, the study also suggests that the wetting described by the Wenzel and Cassie equations is also the local wetting of the contact line rather than the global wetting of the droplet.

  7. Point contacts in encapsulated graphene

    SciTech Connect

    Handschin, Clevin; Fülöp, Bálint; Csonka, Szabolcs; Makk, Péter; Blanter, Sofya; Weiss, Markus; Schönenberger, Christian; Watanabe, Kenji; Taniguchi, Takashi

    2015-11-02

    We present a method to establish inner point contacts with dimensions as small as 100 nm on hexagonal boron nitride (hBN) encapsulated graphene heterostructures by pre-patterning the top-hBN in a separate step prior to dry-stacking. 2- and 4-terminal field effect measurements between different lead combinations are in qualitative agreement with an electrostatic model assuming point-like contacts. The measured contact resistances are 0.5–1.5 kΩ per contact, which is quite low for such small contacts. By applying a perpendicular magnetic field, an insulating behaviour in the quantum Hall regime was observed, as expected for inner contacts. The fabricated contacts are compatible with high mobility graphene structures and open up the field for the realization of several electron optical proposals.

  8. Body Basics

    MedlinePlus

    ... more about how the body works, what basic human anatomy is, and what happens when parts of the body don't function properly. Blood Bones, Muscles, and Joints Brain and Nervous System Digestive System Endocrine System Eyes Female Reproductive System ...

  9. Electron Device Contact Studies.

    DTIC Science & Technology

    1980-08-01

    resistance of the contact Barrier height (I-V or C-V method) I-V characteristic Auger spectroscopy analysis will be made in an attempt to relate the atomic ...in the n-type layer can be given as [20]. C(x) = Cs erfc (25) where D = diffusion coefficient of the dopant atom in GaAs t = time of diffusion Cs...tunneling, assuming a uniform doping of C givess 2cs (IT)I ! 2(12) (8.85) (10 -14) W u (.6)(oI)(loT B (0.9 - 0) W 3.5 x 10-6 cm. The actual Sn atom doping

  10. Contact allergy to dimethacrylate.

    PubMed

    Vaswani, Ravi; Kim, Soon Ja; Sanchez, Adrian; Vaswani, Surender

    2012-01-01

    Contact allergy to methacrylates is uncommon. We present a 55-year-old woman with a 10-year history of persistent pruritus and burning sensation of the gums every time she wore her dentures. Initially she developed swelling and erythema of the face soon after the dentures were placed on the gums. These symptoms abated after a barrier liner was applied between her gums and the dentures. However, the burning sensation and pruritus of the gums progressively worsened and she started to develop blisters on the gums. The skin allergen patch test was 3+ positive with erythema, edema, papules, ulceration, and pruritus for the denture component dimethacrylate. The diagnosis was supported by the patient's medical history, notably positive patch test, and complete amelioration of the symptoms upon cessation of dimethacrylate denture usage.

  11. Contact dermatitis to Alstroemeria.

    PubMed

    Santucci, B; Picardo, M; Iavarone, C; Trogolo, C

    1985-04-01

    A study was carried out on 50 workers in a floriculture centre to evaluate the incidence of contact dermatitis to Alstroemeria. 3 subjects gave positive reactions to aqueous and ethanolic extracts of cut flowers, stems and leaves. By column chromatography, the allergen was isolated and its chemical structure identified as 6-tuliposide A by proton magnetic resonance and carbon-13 magnetic resonance. Only 6-tuliposide A was isolated from cut flowers, and this gave positive reactions when patch tested at 0.01%; a-methylene-gamma-butyrolactone at 10(-5) (v/v) was positive in the same 3 subjects. Other lactones (gamma-methylene-gamma-butyrolactone, alantolactone, isoalantolactone) were negative at all concentrations used.

  12. Wireless Measurement of Contact and Motion Between Contact Surfaces

    NASA Technical Reports Server (NTRS)

    Woodard, Stanley E.; Taylor, Bryant D.

    2007-01-01

    This method uses a magnetic-field- response contact sensor that is designed to identify surface contact and motion between contact locations. The sensor has three components: (1) a capacitor-inductor circuit with two sets of electrical contact pads, (2) a capacitor with a set of electrical contact pads, and (3) an inductor with a set of electrical contact pads. A unique feature of this sensor is that it is inherently multifunctional. Information can be derived from analyzing such sensor response attributes as amplitude, frequency, and bandwidth. A change in one attribute can be due to a change in a physical property of a system. A change in another attribute can be due to another physical property, which has no relationship to the first one.

  13. Contact heat evoked potentials in normal subjects.

    PubMed

    Chen, I-An; Hung, Steven Wu; Chen, Yu-Hsien; Lim, Siew-Na; Tsai, Yu-Tai; Hsiao, Cheng-Lun; Hsieh, Hsiang-Yao; Wu, Tony

    2006-09-01

    Laser-evoked potentials are widely used to investigate nociceptive pathways. The newly developed contact heat stimulator for evoking brain response has the advantages of obtaining reliable scalp potentials and absence of cutaneous lesions. This study aimed to identify the most appropriate stimulation site with consistent cortical responses, and to correlate several parameters of the contact heat evoked potentials (CHEPs) with age, gender, and body height in normal subjects. CHEPs were recorded at Cz with a contact heat stimulator (Medoc, Israel) in 35 normal controls. The subjects were asked to keep eyes open and remain alert. The baseline temperature was 32 degrees C, and stimulation peak heat intensity of 51 degrees C was applied to five body sites: bilateral forearm, right dorsum hand, right peroneal area, and right dorsum foot. Reproducible CHEPs were recorded more frequently when stimulated at volar forearm (62.5%) than at the lower limbs (around 40%). The first negative peak latency (N1) was 370.1 +/- 20.3 ms, first positive peak latency (P1) was 502.4 +/- 33.0 ms, and peak to peak amplitude was 10.2 +/- 4.9 microV with stimulation of the forearm. Perceived pain intensity was not correlated with the presence or amplitude of CHEPs. No gender or inter-side differences were observed for N1 latency and N1-P1 amplitude. Also, no correlation was noted between N1 and age or body height. These results support future clinical access of CHEPs as a diagnostic tool.

  14. Residue contact-count potentials are as effective as residue-residue contact-type potentials for ranking protein decoys

    PubMed Central

    Bolser, Dan M; Filippis, Ioannis; Stehr, Henning; Duarte, Jose; Lappe, Michael

    2008-01-01

    Background For over 30 years potentials of mean force have been used to evaluate the relative energy of protein structures. The most commonly used potentials define the energy of residue-residue interactions and are derived from the empirical analysis of the known protein structures. However, single-body residue 'environment' potentials, although widely used in protein structure analysis, have not been rigorously compared to these classical two-body residue-residue interaction potentials. Here we do not try to combine the two different types of residue interaction potential, but rather to assess their independent contribution to scoring protein structures. Results A data set of nearly three thousand monomers was used to compare pairwise residue-residue 'contact-type' propensities to single-body residue 'contact-count' propensities. Using a large and standard set of protein decoys we performed an in-depth comparison of these two types of residue interaction propensities. The scores derived from the contact-type and contact-count propensities were assessed using two different performance metrics and were compared using 90 different definitions of residue-residue contact. Our findings show that both types of score perform equally well on the task of discriminating between near-native protein decoys. However, in a statistical sense, the contact-count based scores were found to carry more information than the contact-type based scores. Conclusion Our analysis has shown that the performance of either type of score is very similar on a range of different decoys. This similarity suggests a common underlying biophysical principle for both types of residue interaction propensity. However, several features of the contact-count based propensity suggests that it should be used in preference to the contact-type based propensity. Specifically, it has been shown that contact-counts can be predicted from sequence information alone. In addition, the use of a single-body term allows

  15. Investigation of galvanic-coupled intrabody communication using the human body circuit model.

    PubMed

    Kibret, Behailu; Seyedi, MirHojjat; Lai, Daniel T H; Faulkner, Micheal

    2014-07-01

    Intrabody Communication (IBC) is a technique that uses the human body as a transmission medium for electrical signals to connect wearable electronic sensors and devices. Understanding the human body as the transmission medium in IBC paves way for practical implementation of IBC in body sensor networks. In this study, we propose a model for galvanic coupling-type IBC based on a simplified equivalent circuit representation of the human upper arm. We propose a new way to calculate the electrode-skin contact impedance. Based on the model and human experimental results, we discuss important characteristics of galvanic coupling-type IBC, namely, the effect of tissues, anthropometry of subjects, and electrode configuration on signal propagation. We found that the dielectric properties of the muscle primarily characterize the received signal when receiver electrodes are located close to transmitter electrodes. When receiver and transmitter electrodes are far apart, the skin dielectric property affects the received signal.

  16. Hysteresis during contact angles measurement.

    PubMed

    Diaz, M Elena; Fuentes, Javier; Cerro, Ramon L; Savage, Michael D

    2010-03-15

    A theory, based on the presence of an adsorbed film in the vicinity of the triple contact line, provides a molecular interpretation of intrinsic hysteresis during the measurement of static contact angles. Static contact angles are measured by placing a sessile drop on top of a flat solid surface. If the solid surface has not been previously in contact with a vapor phase saturated with the molecules of the liquid phase, the solid surface is free of adsorbed liquid molecules. In the absence of an adsorbed film, molecular forces configure an advancing contact angle larger than the static contact angle. After some time, due to an evaporation/adsorption process, the interface of the drop coexists with an adsorbed film of liquid molecules as part of the equilibrium configuration, denoted as the static contact angle. This equilibrium configuration is metastable because the droplet has a larger vapor pressure than the surrounding flat film. As the drop evaporates, the vapor/liquid interface contracts and the apparent contact line moves towards the center of the drop. During this process, the film left behind is thicker than the adsorbed film and molecular attraction results in a receding contact angle, smaller than the equilibrium contact angle.

  17. Grafts in "closed" rhinoplasty.

    PubMed

    Scattolin, A; D'Ascanio, L

    2013-06-01

    Rhinoplasty is a fascinating and complex surgical procedure aiming at attaining a well-functioning and aesthetically pleasant nose. The use of grafts is of the utmost importance for the nasal surgeon to achieve such results. However, the philosophy and technical use of nasal grafts are different in "closed" and "open" rhinoplasty. The aim of this paper is not detailed description of the numerous grafts reported in the literature; we will describe the main principles of grafts use in "closed" rhinoplasty derived from our experience, with special reference to the philosophical and technical differences in their employment between "closed" and "open" rhinoplasty. Some cases are reported as an example of graft use in "endonasal" approach rhinoplasty.

  18. Microorganisms in closed periapical lesions.

    PubMed

    Abou-Rass, M; Bogen, G

    1998-01-01

    The purpose of this study was to investigate the microorganisms of strictly selected closed periapical lesions associated with both refractory endodontic therapy and pulpal calcification. Definitive criteria were established that assured complete clinical isolation of the periapical lesion from the oral and periodontal environment. A total of 13 criteria-referenced lesions were selected from 70 patients with endodontic surgical indications. A well controlled culturing method was used in all cases and samples were taken by one clinician at three separate sites during each surgery. Samples taken at the surgical window and within the body of the lesion served as controls, whilst a third sample was taken at the apex. In all 13 cases, samples taken from the apex yielded microorganisms comprising 63.6% obligate anaerobes and 36.4% facultative anaerobes. Prevalence of the isolated species was 31.8% for Actinomyces sp., 22.7% Propionibacterium sp., 18.2% Streptococcus sp., 13.6% Staphlyococcus sp., 4.6% Porphyromonas gingivalis, 4.6% Peptostreptococcus micros and 4.6% Gram-negative enterics. The results of this investigation indicate that closed periapical lesions associated with calcified teeth or those resistant to root canal treatment harbour bacteria. The inability to eradicate all root canal microorganisms during root canal treatment, along with anatomical factors, may allow further bacterial colonization of the root apex and surrounding periapical tissues, and consequently prevent healing.

  19. A precontact binary and a shallow contact binary are in the same field

    NASA Astrophysics Data System (ADS)

    Liu, Liang; Qian, Shengbang; He, Jiajia; Liao, Wenping; Liu, Nianping

    2016-06-01

    The period changes of two close binaries, V1107 Cas and AX Cas, which are in the same field, were investigated. Their periods both show a long-term decrease. After further analysis, we found that the periods have their respective cyclic oscillations (T3 = 6.74 ± 0.24 yr for V1107 Cas and T3 = 13.8 ± 0.3 yr for AX Cas), which are possibly caused by a third body due to the light-time effect. We also obtained the complete VRcIc light curves for V1107 Cas and analyzed them with the 2010 version of the Wilson-Devinney code. The photometric results reveal that V1107 Cas is a W-type shallow contact (15.2%±1.8%) binary, with a mass-ratio of 1.797 ± 0.006. The period variation and photometric solution suggest that V1107 Cas is a newly formed contact binary system. Moreover, we estimated the fundamental parameters for V1107 Cas. They are: M1 = 0.39 ± 0.01 M⊙, M2 = 0.70 ± 0.03 M⊙, R1 = 0.52 ± 0.10 R⊙, R2 = 0.68 ± 0.12 R⊙, L1 = 0.178 ± 0.108 L⊙, and L2 = 0.196 ± 0.116 L⊙. Then, based on the coplane assumption, we deduced the masses of possible third bodies to be M3 = 0.091 ± 0.019 M⊙ for V1107 Cas and M3 = 0.325 ± 0.029 M⊙ for AX Cas. Finally, we inferred the evolutional stage of AX Cas, and believe that it is a precontact binary. Thus, the precontact binary AX Cas and the shallow contact binary V1107 Cas have adjoining evolutional stages.

  20. Observational Investigations on Contact Binaries in Multiple-star Systems and Star Clusters

    NASA Astrophysics Data System (ADS)

    Liu, L.

    2013-01-01

    The W UMa-type contact binaries are strongly interacting systems whose components both fill their critical Roche lobes and share a convective common envelope. The models of contact binaries are bottlenecked due to too many uncertain parameters. In the 1960s and 1970s, the common convective envelope model was accepted after several fierce controversies. And then, the thermal relaxation oscillation (TRO) model, the discontinuity model, and the angular momentum loss (AML) model appeared. However, in the past forty years, there lacked remarkable advance. The coexistence of many unknown parameters blocks the theoretical development of contact binaries. A study on the contact binaries in multiple star systems and star clusters, which could provide lots of information for their formation and evolution, may be a potential growing point for understanding these objects. More and more evidence shows that many of contact binaries are located in multiple star systems and star clusters. In this thesis, we observed and analyzed contact binaries in the forementioned systems. The observational and theoretical studies for contact binary are also summarized briefly. The results obtained are as follows: (1) Three contact binaries V1128 Tau, GZ And, VW Boo which possess visual companions show periodic oscillations. The period ranges from 16.7 years to 46.5 years. These oscillations probably come from the orbital movement of a close third body. (2) Four contact binaries GSC 02393-00680, V396 Mon, FU Dra, SS Ari which do not have visual companions also present periodic oscillations. Whether they are real members of multiple star systems needs further investigations. These oscillations probably result from the orbital movement of a close M-type companion. (3) The periods of three contact binaries EQ Cep, ER Cep and V371 Cep in the old open cluster NGC 188 show a long-term increase. There is a cyclic period oscillation in ER Cep, with a period of 5.4 years. We find that the total mass of

  1. Body Image

    MedlinePlus

    ... spider veins Body dysmorphic disorder (BDD) Eating disorders Anorexia nervosa Binge eating disorder Bulimia nervosa Over-exercising ... conditions? Visit our Mental health section. Fact sheets Anorexia nervosa Binge eating disorder Bulimia nervosa Cosmetics and ...

  2. Body Piercing

    MedlinePlus

    ... must have a consistent mirror finish. Implant grade stainless steel is least likely to produce a foreign body ... All of these cost more than implant grade stainless steel. Gold jewelry should be at least 14 karat ...

  3. Contact dermatitis: allergic and irritant.

    PubMed

    Tan, Cher-Han; Rasool, Sarah; Johnston, Graham A

    2014-01-01

    Facial contact dermatitis is frequently encountered in medical practice in both male and female patients. Identifying the underlying cause can be challenging, and the causative agent may be overlooked if it is not considered during the assessment of a patient. The two main types of contact dermatitis are irritant contact dermatitis (ICD) and allergic contact dermatitis (ACD). The mechanisms and common causative agents vary for both ICD and ACD, but the clinical picture is often similar, particularly for chronic disease. Facial contact dermatitis can be successfully treated by avoiding the causative agent. In this review, we focus on the clinical assessment of a patient with facial contact dermatitis and the mechanisms of both ICD and ACD. Common causative agents, including emerging allergens, are discussed in detail, and suggestions are made regarding the management of patients with proven ICD or ACD of the face.

  4. Wearable telescopic contact lens.

    PubMed

    Arianpour, Ashkan; Schuster, Glenn M; Tremblay, Eric J; Stamenov, Igor; Groisman, Alex; Legerton, Jerry; Meyers, William; Amigo, Goretty Alonso; Ford, Joseph E

    2015-08-20

    We describe the design, fabrication, and testing of a 1.6 mm thick scleral contact lens providing both 1× and 2.8× magnified vision paths, intended for use as a switchable eye-borne telescopic low-vision aid. The F/9.7 telescopic vision path uses an 8.2 mm diameter annular entrance pupil and 4 internal reflections in a polymethyl methacrylate precision optic. This gas-impermeable insert is contained inside a smooth outer casing of rigid gas-permeable polymer, which also provides achromatic correction for refraction at the curved lens face. The unmagnified F/4.1 vision path is through the central aperture of the lens, with additional transmission between the annular telescope rings to enable peripheral vision. We discuss potential solutions for providing oxygenation for an extended wear version of the lens. The prototype lenses were characterized using a scale-model human eye, and telescope functionality was confirmed in a small-scale clinical (nondispensed) demonstration.

  5. Noise of sliding rough contact

    NASA Astrophysics Data System (ADS)

    Le Bot, Alain

    2017-01-01

    This article is a discussion about the origin of friction noise produced when rubbing solids having rough surfaces. We show that noise emerges from numerous impacts into the contact between antagonist asperities of surfaces. Prediction of sound sources reduces to a statistical problem of contact mechanics. On the other hand, contact is also responsible of dissipation of vibration. This leads to the paradoxical result that the noise may not be proportional to the number of sources.

  6. Point contact silicon solar cells

    NASA Technical Reports Server (NTRS)

    Swanson, Richard M.

    1987-01-01

    A new type of silicon solar cell has been developed. It is called the point-contact cell because the metal semiconductor contacts are restricted to an array of small points on the back of the cell. The point contact cell has recently demonstrated 22 percent conversion efficiency at one sun and 27.5 percent at 100 suns under an AM1.5 spectrum.

  7. [Occlusal contact principles in prosthodontics].

    PubMed

    Wang, Meiqing

    2012-12-01

    The occlusion contact, which is engaged in many dental clinical scopes, is the primary subject in the field of dental occlusion. Prosthodontics is one of the fields that are involved in with this subject, including the static relation (the occlusal contacts in intercuspal occlusion) and the dynamic relation (such as that in chewing movement). Not only the restorations, but also the abutments, that have to be properly managed to obtain a harmony occlusal contact relationship.

  8. Method for forming metal contacts

    DOEpatents

    Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

    2013-09-17

    Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

  9. Ohmic Contacts to Semiconducting Diamond

    DTIC Science & Technology

    1990-10-01

    after approxi- mately 30 minutes. Analysis using Auger electron spectroscopy, scanning electron microscopy, and x-ray diffraction established the...adherent wire bonds. To test the contacts for bondability, 10-mil gold wires were bonded to the contacts by using an ultrasonic ball bonder. Pull-to...resistance of the ohmic contacts (reference 4). We have chosen to use the circular transmission line geometry and analysis first proposed by Reeves

  10. Bog bodies.

    PubMed

    Lynnerup, Niels

    2015-06-01

    In northern Europe during the Iron Age, many corpses were deposited in bogs. The cold, wet and anaerobic environment leads in many cases to the preservation of soft tissues, so that the bodies, when found and excavated several thousand years later, are remarkably intact. Since the 19th century the bog bodies have been studied using medical and natural scientific methods, and recently many bog bodies have been re-examined using especially modern, medical imaging techniques. Because of the preservation of soft tissue, especially the skin, it has been possible to determine lesions and trauma. Conversely, the preservation of bones is less good, as the mineral component has been leached out by the acidic bog. Together with water-logging of collagenous tissue, this means that if the bog body is simply left to dry out when found, as was the case pre-19th century, the bones may literally warp and shrink, leading to potential pitfalls in paleopathological diagnostics. Bog bodies have in several instances been crucial in determining the last meal, as gut contents may be preserved, and thus augment our knowledge on pre-historic diet by adding to, for example, stable isotope analyses. This article presents an overview of our knowledge about the taphomic processes as well as the methods used in bog body research.

  11. Female elk contacts are neither frequency nor density dependent

    USGS Publications Warehouse

    Cross, Paul C.; Creech, Tyler G.; Ebinger, Michael R.; Manlove, Kezia R.; Irvine, Kathryn M.; Henningsen, John C.; Rogerson, Jared D.; Scurlock, Brandon M.; Creely, Scott

    2013-01-01

    Identifying drivers of contact rates among individuals is critical to understanding disease dynamics and implementing targeted control measures. We studied the interaction patterns of 149 female elk (Cervus canadensis) distributed across five different regions of western Wyoming over three years, defining a contact as an approach within one body length (∼2 m). Using hierarchical models that account for correlations within individuals, pairs, and groups, we found that pairwise contact rates within a group declined by a factor of three as group sizes increased 33-fold. Per capita contact rates, however, increased with group size according to a power function, such that female elk contact rates fell in between the predictions of density- or frequency-dependent disease models. We found similar patterns for the duration of contacts. Our results suggest that larger elk groups are likely to play a disproportionate role in the disease dynamics of directly transmitted infections in elk. Supplemental feeding of elk had a limited impact on pairwise interaction rates and durations, but per capita rates were more than two times higher on feeding grounds. Our statistical approach decomposes the variation in contact rate into individual, dyadic, and environmental effects, and provides insight into factors that may be targeted by disease control programs. In particular, female elk contact patterns were driven more by environmental factors such as group size than by either individual or dyad effects.

  12. Female elk contacts are neither frequency nor density dependent.

    PubMed

    Cross, P C; Creech, T G; Ebinger, M R; Manlove, K; Irvine, K; Henningsen, J; Rogerson, J; Scurlock, B M; Creel, S

    2013-09-01

    Identifying drivers of contact rates among individuals is critical to understanding disease dynamics and implementing targeted control measures. We studied the interaction patterns of 149 female elk (Cervus canadensis) distributed across five different regions of western Wyoming over three years, defining a contact as an approach within one body length (-2 min). Using hierarchical models that account for correlations within individuals, pairs, and groups, we found that pairwise contact rates within a group declined by a factor of three as group sizes increased 33-fold. Per capita contact rates, however, increased with group size according to a power function, such that female elk contact rates fell in between the predictions of density- or frequency-dependent disease models. We found similar patterns for the duration of contacts. Our results suggest that larger elk groups are likely to play a disproportionate role in the disease dynamics of directly transmitted infections in elk. Supplemental feeding of elk had a limited impact on pairwise interaction rates and durations, but per capita rates were more than two times higher on feeding grounds. Our statistical approach decomposes the variation in contact rate into individual, dyadic, and environmental effects, and provides insight into factors that may be targeted by disease control programs. In particular, female elk contact patterns were driven more by environmental factors such as group size than by either individual or dyad effects.

  13. A robust polynomial fitting approach for contact angle measurements.

    PubMed

    Atefi, Ehsan; Mann, J Adin; Tavana, Hossein

    2013-05-14

    Polynomial fitting to drop profile offers an alternative to well-established drop shape techniques for contact angle measurements from sessile drops without a need for liquid physical properties. Here, we evaluate the accuracy of contact angles resulting from fitting polynomials of various orders to drop profiles in a Cartesian coordinate system, over a wide range of contact angles. We develop a differentiator mask to automatically find a range of required number of pixels from a drop profile over which a stable contact angle is obtained. The polynomial order that results in the longest stable regime and returns the lowest standard error and the highest correlation coefficient is selected to determine drop contact angles. We find that, unlike previous reports, a single polynomial order cannot be used to accurately estimate a wide range of contact angles and that a larger order polynomial is needed for drops with larger contact angles. Our method returns contact angles with an accuracy of <0.4° for solid-liquid systems with θ < ~60°. This compares well with the axisymmetric drop shape analysis-profile (ADSA-P) methodology results. Above about 60°, we observe significant deviations from ADSA-P results, most likely because a polynomial cannot trace the profile of drops with close-to-vertical and vertical segments. To overcome this limitation, we implement a new polynomial fitting scheme by transforming drop profiles into polar coordinate system. This eliminates the well-known problem with high curvature drops and enables estimating contact angles in a wide range with a fourth-order polynomial. We show that this approach returns dynamic contact angles with less than 0.7° error as compared to ADSA-P, for the solid-liquid systems tested. This new approach is a powerful alternative to drop shape techniques for estimating contact angles of drops regardless of drop symmetry and without a need for liquid properties.

  14. Electrical contact resistance in filaments

    NASA Astrophysics Data System (ADS)

    Wu, Xiang-Fa; Zhou, Zhengping; Zhou, Wang-Min

    2012-05-01

    Electrical contact resistance (ECR) influences the electrochemical performance of porous electrodes made of stacked discrete materials (e.g., carbon nanotubes, nanofibers, etc.) for use in supercapacitors and rechargeable batteries. This study establishes a simple elasticity-conductivity model for the ECR of filaments in adhesive contact. The elastic deformation and size of electrical contact zone of the filaments are determined by using an adhesive contact model of filaments, and the ECR of adhesive filaments is obtained in explicit form. Dependencies of the ECR upon the filament geometries, surface energy, and elasticity are examined.

  15. Closed Small Cell Clouds

    Atmospheric Science Data Center

    2013-04-19

    ... (right)   The structure of tightly packed "closed cells" in a layer of marine stratocumulus over the southeastern Pacific Ocean ... into interesting structures such as those shown here. These cells are notably small, with diameters ranging from 10-15 kilometers, instead ...

  16. Closing the Performance Gap.

    ERIC Educational Resources Information Center

    Riggins, Cheryl G.

    2002-01-01

    Describes how the principal of a K-2, 400-student suburban elementary school near Flint, Michigan, worked with her staff and superintendent to develop and implement a strategic plan to close the student achievement gap. Reports significant improvement in reading and math scores after 1 year. (PKP)

  17. Surgical wound care -- closed

    MedlinePlus

    ... around the incision increases or becomes thick, tan, green, or yellow, or smells bad (pus). Also call if your temperature is above 100°F (37.7°C) for more than 4 hours. Alternative Names Surgical incision care; Closed wound care References Leong M, Phillips LG. ...

  18. Closing the Loop Sampler.

    ERIC Educational Resources Information Center

    California Integrated Waste Management Board, Sacramento.

    Closing the Loop (CTL) is a science curriculum designed to introduce students to integrated waste management through awareness. This document presents five lesson plans focusing on developing an understanding of natural resources, solid wastes, conservation, and the life of landfills. Contents include: (1) "What Are Natural Resources?"; (2)…

  19. Review: The Closing Circle

    ERIC Educational Resources Information Center

    Environment, 1972

    1972-01-01

    Two views of prominent biologists are presented side-by-side. Focal point is Barry Commoner's book, The Closing Circle, with a subsequent review by Paul Ehrlich. Growth of population, increases in affluence, and increased pollution from products of technology are considered. (BL)

  20. Ion Implanted Passivated Contacts for Interdigitated Back Contacted Solar Cells

    SciTech Connect

    Young, David L.; Nemeth, William; LaSalvia, Vincenzo; Reedy, Robert; Bateman, Nicholas; Stradins, Pauls

    2015-06-14

    We describe work towards an interdigitated back contacted (IBC) solar cell utilizing ion implanted, passivated contacts. Formation of electron and hole passivated contacts to n-type CZ wafers using tunneling SiO2 and ion implanted amorphous silicon (a-Si) are described. P and B were ion implanted into intrinsic amorphous Si films at several doses and energies. A series of post-implant anneals showed that the passivation quality improved with increasing annealing temperatures up to 900 degrees C. The recombination parameter, Jo, as measured by a Sinton lifetime tester, was Jo ~ 14 fA/cm2 for Si:P, and Jo ~ 56 fA/cm2 for Si:B contacts. The contact resistivity for the passivated contacts, as measured by TLM patterns, was 14 milliohm-cm2 for the n-type contact and 0.6 milliohm-cm2 for the p-type contact. These Jo and pcontact values are encouraging for forming IBC cells using ion implantation to spatially define dopants.

  1. Contact line and contact angle dynamics in superhydrophobic channels.

    PubMed

    Zhang, Junfeng; Kwok, Daniel Y

    2006-05-23

    The dynamics of the wetting and movement of a three-phase contact line confined between two superhydrophobic surfaces were studied using a mean-field free-energy lattice Boltzmann model. Principle features of superhydrophobic surfaces, such as trapped vapor/air between rough microstructures, high contact angles, reduced contact angle hysteresis, and low resistance to fluid flow, were all observed. Movement of the three-phase contact line over a well-patterned superhydrophobic surface displays a periodic stick-jump-slip behavior, while the dynamic contact angle changes accordingly from maximum to minimum. Two regimes were found for the flow velocity as a function of surface roughness and can be related directly to the balance between driving force and flow resistance. This work provides a better understanding of dynamic wetting and fluid flow behaviors over superhydrophobic surfaces and hence could be useful in related applications.

  2. Imaging of contact acoustic nonlinearity using synthetic aperture technique.

    PubMed

    Yun, Dongseok; Kim, Jongbeom; Jhang, Kyung-Young

    2013-09-01

    The angle beam incidence and reflection technique for the evaluation of contact acoustic nonlinearity (CAN) at solid-solid contact interfaces (e.g., closed cracks) has recently been developed to overcome the disadvantage of accessing both the inner and outer surfaces of structures for attaching pulsing and receiving transducers in the through-transmission of normal incidence technique. This paper proposes a technique for B-mode imaging of CAN based on the above reflection technique, which uses the synthetic aperture focusing technique (SAFT) and short-time Fourier transform (STFT) to visualize the distribution of the CAN-induced second harmonic magnitude as well as the nonlinear parameter. In order to verify the usefulness of the proposed method, a solid-solid contact interface was tested and the change of the contact acoustic nonlinearity according to the increasing contact pressure was visualized in images of the second harmonic magnitude and the relative nonlinear parameter. The experimental results showed good agreement with the previously developed theory identifying the dependence of the scattered second harmonics on the contact pressure. This technique can be used for the detection and improvement of the sizing accuracy of closed cracks that are difficult to detect using the conventional linear ultrasonic technique.

  3. Back contacts for silicon-on-ceramic solar cells

    NASA Technical Reports Server (NTRS)

    Schuller, T. L.; Marquardt, S.

    1981-01-01

    Grooved substrate exposes back surface of photovoltaic cells, allowing dopant diffusion into surface and electrical contact. When substrate is coated successively with carbon and molten silicon, polycrystalline-silicon bridges form over grooves, but leave channels open. Best adhesion results when substrate grooves run perpendicular to direction of liquid-silicon layer and are closely spaced.

  4. Posterior labral injury in contact athletes.

    PubMed

    Mair, S D; Zarzour, R H; Speer, K P

    1998-01-01

    Nine athletes (seven football offensive linemen, one defensive lineman, and one lacrosse player) were found at arthroscopy to have posterior labral detachment from the glenoid. In our series, this lesion is specific to contact athletes who engage their opponents with arms in front of the body. All patients had pain with bench pressing and while participating in their sport, diminishing their ability to play effectively. Conservative measures were ineffective in relieving their symptoms. Examination under anesthesia revealed symmetric glenohumeral translation bilaterally, without evidence of posterior instability. Treatment consisted of glenoid rim abradement and posterior labral repair with a bioabsorbable tack. All patients returned to complete at least one full season of contact sports and weightlifting without pain (minimum follow-up, > or = 2 years). Although many injuries leading to subluxation of the glenohumeral joint occur when an unanticipated force is applied, contact athletes ready their shoulder muscles in anticipation of impact with opponents. This leads to a compressive force at the glenohumeral joint. We hypothesize that, in combination with a posteriorly directed force at impact, the resultant vector is a shearing force to the posterior labrum and articular surface. Repeated exposure leads to posterior labral detachment without capsular injury. Posterior labral reattachment provides consistently good results, allowing the athlete to return to competition.

  5. Molecular dynamics study of contact mechanics: contact area and interfacial separation from small to full contact

    NASA Astrophysics Data System (ADS)

    Yang, Chunyan; Persson, Bo

    2008-03-01

    We report a molecular dynamics study of the contact between a rigid solid with a randomly rough surface and an elastic block with a flat surface. We study the contact area and the interfacial separation from small contact (low load) to full contact (high load). For small load the contact area varies linearly with the load and the interfacial separation depends logarithmically on the load [1-4]. For high load the contact area approaches to the nominal contact area (i.e., complete contact), and the interfacial separation approaches to zero. The present results may be very important for soft solids, e.g., rubber, or for very smooth surfaces, where complete contact can be reached at moderate high loads without plastic deformation of the solids. References: [1] C. Yang and B.N.J. Persson, arXiv:0710.0276, (to appear in Phys. Rev. Lett.) [2] B.N.J. Persson, Phys. Rev. Lett. 99, 125502 (2007) [3] L. Pei, S. Hyun, J.F. Molinari and M.O. Robbins, J. Mech. Phys. Sol. 53, 2385 (2005) [4] M. Benz, K.J. Rosenberg, E.J. Kramer and J.N. Israelachvili, J. Phy. Chem. B.110, 11884 (2006)

  6. Thermal screening of facial skin arterial hot spots using non-contact infrared radiometry.

    PubMed

    Williams, E M; Heusch, A I; McCarthy, P W

    2008-03-01

    Non-contact infrared thermometry of facial skin offers advantages over less accessible internal body sites, especially when considering mass screening for febrile infectious disease. The forehead offers an obvious site, but does not present an isothermic surface, as various small arteries passing close to the surface create 'hot-spots'. The aim of this study is to use non-contact infrared (IR) thermometry to determine the link between the temperature at specific facial skin sites and clinical body temperature. A sample of 169 asymptomatic adults (age range 18-54 years) was screened with IR thermometers (Braun Thermoscan proLT for auditory meatus (AM) temperature representing clinical body temperature, and a Raytek, Raynger MX for skin surface temperature). Peak IR skin temperature was measured over the course of each posterior auricular artery (PAA) and each superficial temporal artery (STA). In a sub-group (n = 54) the peak skin temperature of the forehead's metopic region (MR) was also recorded. There were no differences (P > 0.05) between the PAA and STA at 34.2 +/- 0.9 degrees C and 34.2 +/- 0.7 degrees C, respectively, which were 2.5 degrees C cooler than the AM temperature (36.7 +/- 0.5 degrees C, p < 0.001). Although there was no correlation between AM and PAA or STA there was a correlation (r2 = 0.63, p < 0.001) between PAA and STA. There were no asymmetric temperature differences between the left and right sides and males had warmer skin over the MR (F, 33.6 +/- 0.7 degrees C versus M, 34.4 +/- 0.6 degrees C, p < 0.001). Although a lack of correlation between either PAA or STA and AM was apparent in asymptomatics, further research in symptomatics is required to determine the usefulness of these measurements in mass screening of conditions such as fever.

  7. Fabricating customized hydrogel contact lens

    NASA Astrophysics Data System (ADS)

    Childs, Andre; Li, Hao; Lewittes, Daniella M.; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F.

    2016-10-01

    Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young’s modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies.

  8. Fabricating customized hydrogel contact lens

    PubMed Central

    Childs, Andre; Li, Hao; Lewittes, Daniella M.; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F.

    2016-01-01

    Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young’s modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies. PMID:27748361

  9. Forcing contact inhibition of locomotion.

    PubMed

    Roycroft, Alice; Mayor, Roberto

    2015-07-01

    Contact inhibition of locomotion drives a variety of biological phenomenon, from cell dispersion to collective cell migration and cancer invasion. New imaging techniques have allowed contact inhibition of locomotion to be visualised in vivo for the first time, helping to elucidate some of the molecules and forces involved in this phenomenon.

  10. Fabricating customized hydrogel contact lens.

    PubMed

    Childs, Andre; Li, Hao; Lewittes, Daniella M; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F

    2016-10-17

    Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young's modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies.

  11. Body Imaging

    NASA Technical Reports Server (NTRS)

    2001-01-01

    The high-tech art of digital signal processing (DSP) was pioneered at NASA's Jet Propulsion Laboratory (JPL) in the mid-1960s for use in the Apollo Lunar Landing Program. Designed to computer enhance pictures of the Moon, this technology became the basis for the Landsat Earth resources satellites and subsequently has been incorporated into a broad range of Earthbound medical and diagnostic tools. DSP is employed in advanced body imaging techniques including Computer-Aided Tomography, also known as CT and CATScan, and Magnetic Resonance Imaging (MRI). CT images are collected by irradiating a thin slice of the body with a fan-shaped x-ray beam from a number of directions around the body's perimeter. A tomographic (slice-like) picture is reconstructed from these multiple views by a computer. MRI employs a magnetic field and radio waves, rather than x-rays, to create images. In this photograph, a patient undergoes an open MRI.

  12. Body Imaging

    NASA Technical Reports Server (NTRS)

    2001-01-01

    The high-tech art of digital signal processing (DSP) was pioneered at NASA's Jet Propulsion Laboratory (JPL) in the mid-1960s for use in the Apollo Lunar Landing Program. Designed to computer enhance pictures of the Moon, this technology became the basis for the Landsat Earth resources satellites and subsequently has been incorporated into a broad range of Earthbound medical and diagnostic tools. DSP is employed in advanced body imaging techniques including Computer-Aided Tomography, also known as CT and CATScan, and Magnetic Resonance Imaging (MRI). CT images are collected by irradiating a thin slice of the body with a fan-shaped x-ray beam from a number of directions around the body's perimeter. A tomographic (slice-like) picture is reconstructed from these multiple views by a computer. MRI employs a magnetic field and radio waves, rather than x-rays, to create images.

  13. Close Quarters Combat Shooting

    DTIC Science & Technology

    2010-04-14

    1994.at the Palm Beach Community College Criminal Justice Institute ofLakeworth, Florida to the more dynamic force-on-force, realistic scenario...Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188) Washington, DC...Shooting is the Superior Method for Close Quarters Combat 5b. GRANT NUMBER Shooting" N/A Sc. PROGRAM ELEMENT NUMBER N/A 6. AUTHOR( S ) Sd. PROJECT

  14. Closing the Pay Gap

    DTIC Science & Technology

    2000-10-01

    the pay gap has been narrowed, hut only to just under 10 percent. And current military compensation legislation does not close the gap until 2026. There...will continue to be a pay gap until 2026 unless the next administration and the next Congress provide more for pay above the 1999 legislated ramp- up...of .5 percent (one half of one percent) per year to attain pay equality . That means that soldiers, sailors, airmen, marines and Coast Guardsmen

  15. Contact dermatitis in military personnel.

    PubMed

    Dever, Tara T; Walters, Michelle; Jacob, Sharon

    2011-01-01

    Military personnel encounter the same allergens and irritants as their civilian counterparts and are just as likely to develop contact dermatitis from common exposures encountered in everyday life. In addition, they face some unique exposures that can be difficult to avoid owing to their occupational duties. Contact dermatitis can be detrimental to a military member's career if he or she is unable to perform core duties or avoid the inciting substances. An uncontrolled contact dermatitis can result in the member's being placed on limited-duty (ie, nondeployable) status, needing a job or rate change, or separation from military service. We present some common causes of contact dermatitis in military personnel worldwide and some novel sources of contact dermatitis in this population that may not be intuitive.

  16. Beyond Cassie equation: Local structure of heterogeneous surfaces determines the contact angles of microdroplets

    PubMed Central

    Zhang, Bo; Wang, Jianjun; Liu, Zhiping; Zhang, Xianren

    2014-01-01

    The application of Cassie equation to microscopic droplets is recently under intense debate because the microdroplet dimension is often of the same order of magnitude as the characteristic size of substrate heterogeneities, and the mechanism to describe the contact angle of microdroplets is not clear. By representing real surfaces statistically as an ensemble of patterned surfaces with randomly or regularly distributed heterogeneities (patches), lattice Boltzmann simulations here show that the contact angle of microdroplets has a wide distribution, either continuous or discrete, depending on the patch size. The origin of multiple contact angles observed is ascribed to the contact line pinning effect induced by substrate heterogeneities. We demonstrate that the local feature of substrate structure near the contact line determines the range of contact angles that can be stabilized, while the certain contact angle observed is closely related to the contact line width. PMID:25059292

  17. Body parts

    NASA Astrophysics Data System (ADS)

    Ayiter, Elif

    2010-01-01

    In this project, the artist wishes to examine corporeality in the virtual realm, through the usage of the (non)-physical body of the avatar. An art installation created in the virtual world of Second Life, which is meant to be accessed with site specific avatars, will provide the creative platform whereby this investigation is undertaken. Thus, "body parts" seeks to challenge the residents of virtual environments into connecting with the virtual manifestations, i.e., avatars of others in an emotionally expressive/intimate manner.

  18. Body Imaging

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Magnetic Resonance Imaging (MRI) and Computer-aided Tomography (CT) images are often complementary. In most cases, MRI is good for viewing soft tissue but not bone, while CT images are good for bone but not always good for soft tissue discrimination. Physicians and engineers in the Department of Radiology at the University of Michigan Hospitals are developing a technique for combining the best features of MRI and CT scans to increase the accuracy of discriminating one type of body tissue from another. One of their research tools is a computer program called HICAP. The program can be used to distinguish between healthy and diseased tissue in body images.

  19. Closing of cracks under impact loading

    SciTech Connect

    Finkel', V.M.; Fomin, I.M.; Shegai, V.V.

    1985-12-01

    The healing of cracks has been studied in crystalline materials such as diamond, sodium chloride, tungsten, molybdenum and quartz, and the possibility has also been studied of restoring material continuity to sodium chloride and lithium fluoride single crystals under conditions of relatively prolonged compression over a time range of from one to tens of seconds. Potential restoration of interatomic bonds between surfaces of failed material (reanimation) precedes collapse of a crack as a process of approach of its edges before mechanical contact. The goal of this work is to study crack closing with short-term impact.

  20. Microscopic and spectroscopic features of gunpowder and its documentation in gunshot wounds in charred bodies.

    PubMed

    Dolinak, David; Wise, Steven H; Jones, Curtiss

    2008-12-01

    Determining the direction and range of fire of gunshot wounds in charred bodies can be difficult because soot resulting from thermal injury can grossly be identical to soot arising from a contact or close-range firearm discharge. Two charred bodies had gunshot wounds of the head and neck region that were distorted by thermal effect, precluding determination of the direction and range of fire by gross findings alone. By microscopy, deep wound tissue from each charred body had foreign material suggestive of gunpowder. Samples of the foreign material were examined by Fourier transform infrared (FT-IR) microscopy and determined to be cellulose nitrate (nitrocellulose), a main component of gunpowder. In addition, 12 cases of suicide in well-preserved bodies with contact gunshot wounds were examined with FT-IR microscopy, confirming the presence of cellulose nitrate in 6 (50%) of the cases. Identification of cellulose nitrate in the tracks of gunshot wounds can assist in the determination of direction and range of fire when the surface features are charred.

  1. Follow-up of Contacts of Middle East Respiratory Syndrome Coronavirus-Infected Returning Travelers, the Netherlands, 2014.

    PubMed

    Mollers, Madelief; Jonges, Marcel; Pas, Suzan D; van der Eijk, Annemiek A; Dirksen, Kees; Jansen, Casper; Gelinck, Luc B S; Leyten, Eliane M S; Thurkow, Ingrid; Groeneveld, Paul H P; van Gageldonk-Lafeber, Arianne B; Koopmans, Marion P; Timen, Aura

    2015-09-01

    Notification of 2 imported cases of infection with Middle East respiratory syndrome coronavirus in the Netherlands triggered comprehensive monitoring of contacts. Observed low rates of virus transmission and the psychological effect of contact monitoring indicate that thoughtful assessment of close contacts is prudent and must be guided by clinical and epidemiologic risk factors.

  2. Dynamics of Orbits Close to Asteroid 4179 Toutatis

    NASA Technical Reports Server (NTRS)

    Scheeres, D. J.; Ostro, S. J.; Hudson, R. S.; DeJong, E. M.; Suzuki, S.

    1998-01-01

    We use a radar-derived physical model of 4179 Toutatis to investigate close-orbit dynamics around that irregularly shaped, non-principal-axis rotator. The orbital dynamics about this body are markedly different than the dynamics about uniformly rotating asteroids. The results of this paper have a wider application to orbit dynamics about bodies in a non-principal-axis rotation state.

  3. Novel vertical silicon photodiodes based on salicided polysilicon trenched contacts

    SciTech Connect

    Kaminski, Yelena; Shauly, Eitan; Paz, Yaron

    2015-12-07

    The classical concept of silicon photodiodes comprises of a planar design characterized by heavily doped emitters. Such geometry has low collection efficiency of the photons absorbed close to the surface. An alternative, promising, approach is to use a vertical design. Nevertheless, realization of such design is technologically challenged, hence hardly explored. Herein, a novel type of silicon photodiodes, based on salicided polysilicon trenched contacts, is presented. These contacts can be prepared up to 10 μm in depth, without showing any leakage current associated with the increase in the contact area. Consequently, the trenched photodiodes revealed better performance than no-trench photodiodes. A simple two dimensional model was developed, allowing to estimate the conditions under which a vertical design has the potential to have better performance than that of a planar design. At large, the deeper the trench is, the better is the vertical design relative to the planar (up to 10 μm for silicon). The vertical design is more advantageous for materials characterized by short diffusion lengths of the carriers. Salicided polysilicon trenched contacts open new opportunities for the design of solar cells and image sensors. For example, these contacts may passivate high contact area buried contacts, by virtue of the conformity of polysilicon interlayer, thus lowering the via resistance induced recombination enhancement effect.

  4. Novel vertical silicon photodiodes based on salicided polysilicon trenched contacts

    NASA Astrophysics Data System (ADS)

    Kaminski, Yelena; Shauly, Eitan; Paz, Yaron

    2015-12-01

    The classical concept of silicon photodiodes comprises of a planar design characterized by heavily doped emitters. Such geometry has low collection efficiency of the photons absorbed close to the surface. An alternative, promising, approach is to use a vertical design. Nevertheless, realization of such design is technologically challenged, hence hardly explored. Herein, a novel type of silicon photodiodes, based on salicided polysilicon trenched contacts, is presented. These contacts can be prepared up to 10 μm in depth, without showing any leakage current associated with the increase in the contact area. Consequently, the trenched photodiodes revealed better performance than no-trench photodiodes. A simple two dimensional model was developed, allowing to estimate the conditions under which a vertical design has the potential to have better performance than that of a planar design. At large, the deeper the trench is, the better is the vertical design relative to the planar (up to 10 μm for silicon). The vertical design is more advantageous for materials characterized by short diffusion lengths of the carriers. Salicided polysilicon trenched contacts open new opportunities for the design of solar cells and image sensors. For example, these contacts may passivate high contact area buried contacts, by virtue of the conformity of polysilicon interlayer, thus lowering the via resistance induced recombination enhancement effect.

  5. Elastohydrodynamic lubrication of elliptical contacts

    NASA Technical Reports Server (NTRS)

    Hamrock, B. J.

    1981-01-01

    The determination of the minimum film thickness within contact is considered for both fully flooded and starved conditions. A fully flooded conjunction is one in which the film thickness is not significantly changed when the amount of lubricant is increased. The fully flooded results presented show the influence of contact geometry on minimum film thickness as expressed by the ellipticity parameter and the dimensionless speed, load, and materials parameters. These results are applied to materials of high elastic modulus (hard EHL), such as metal, and to materials of low elastic modulus(soft EHL), such as rubber. In addition to the film thickness equations that are developed, contour plots of pressure and film thickness are given which show the essential features of elastohydrodynamically lubricated conjunctions. The crescent shaped region of minimum film thickness, with its side lobes in which the separation between the solids is a minimum, clearly emerges in the numerical solutions. In addition to the 3 presented for the fully flooded results, 15 more cases are used for hard EHL contacts and 18 cases are used for soft EHL contacts in a theoretical study of the influence of lubricant starvation on film thickness and pressure. From the starved results for both hard and soft EHL contacts, a simple and important dimensionless inlet boundary distance is specified. This inlet boundary distance defines whether a fully flooded or a starved condition exists in the contact. Contour plots of pressure and film thickness in and around the contact are shown for conditions.

  6. Contact and capillary forces at the nanometer scale

    NASA Astrophysics Data System (ADS)

    Cheng, Shengfeng

    In this thesis I use molecular dynamics (MD) simulations to study the physics of nanoasperity contacts and contrast their behavior to predictions of traditional continuum theories. Contact area plays a central role in continuum theories of friction and adhesion. In Chapter II, I use simulations of nanoscopic contacts between clean surfaces with simple geometry to show that it is difficult to extend the continuum notion of contact to the atomic scale. Definitions of contact area based on interatomic forces have a strong dependence on temperature, atomic structure of the surfaces in contact, and length of time interval during which the contact area is measured. Even for atomically flat surfaces, contact area grows linearly with the load pushing surfaces together, and pressures comparable to the ideal hardness are needed to achieve full contact at typical temperatures. A simple harmonic mean-field theory is developed that provides a quantitative description of this behavior and explains why the instantaneous forces on atoms are found to have a universal exponential distribution. The mean field theory also describes single-asperity contact by a spherical tip. The static and kinetic friction for this latter geometry are shown to have different scaling with load and the effect of contact stiffness on kinetic friction is explored. The properties of these clean surfaces are strongly dependent on the detailed atomic structure of the solids. However, experimental surfaces are typically coated with an adsorbed layer of small molecules from the surrounding air. In Chapter III, I study the effect of an adsorbed monolayer on contact and friction of nanoasperities. Results show that monolayers reduce sensitivity to atomic structure and lead to a friction that scales more linearly with load than with contact area. Three different measures of contact area are studied and their load dependence is compared with the continuum prediction. In Chapter IV, I study capillary adhesion

  7. IDIS Small Bodies and Dust Node

    NASA Astrophysics Data System (ADS)

    de Sanctis, M. C.; Capria, M. T.; Carraro, F.; Fonte, S.; Giacomini, L.; Turrini, D.

    2009-04-01

    The EuroPlaNet information service provides access to lists of researchers, laboratories and data archives relevant to many aspects of planetary and space physics. Information can be accessed through EuroPlaNet website or, for advanced searches, via web-services available at the different thematic nodes. The goal of IDIS is to provide easy-to-use access to resources like people, laboratories, modeling activities and data archives related to planetary sciences. The development of IDIS is an international effort started under the European Commission's 6th Framework Programme and which will expand its capabilities during the 7th Framework Programme, as part of the Capacities Specific Programme/Research Infrastructures. IDIS is complemented by a set of other EuroPlaNet web-services maintained under the responsibility of separate institutions. Each activity maintains its own web-portal with cross-links pointing to the other elements of EuroPlaNet. General access is provided via the EuroPlaNet Homepage. IDIS is not a repository of original data but rather supports the access to various data sources. The final goal of IDIS is to provide Virtual Observatory tools for the access to data from laboratory measurements and ground- and spaced-based observations to modeling results, allowing the combination of as divergent data sources as feasible. IDIS is built around four scientific nodes located in different European countries. Each node deals with a subset of the disciplines related to planetary sciences and, working in cooperation with international experts in these fields, provides a wealth of information to the international planetary science community. The EuroPlaNet IDIS thematic node "Small Bodies and Dust Node" is hosted by the Istituto di Fisica dello Spazio Interplanetario and is established in close cooperation with the Istituto di Astrofisica Spaziale. Both these institutes are part of the Istituto Nazionale di Astrofisica (INAF). The IDIS Small Bodies and Dust

  8. Effectiveness of Interventions to Reduce Contact Rates during a Simulated Influenza Pandemic

    PubMed Central

    Shay, Davis K.; Davis, Xiaohong M.; Patel, Rajan; Jin, Xiaoping; Weintraub, Eric; Orenstein, Evan; Thompson, William W.

    2007-01-01

    Measures to decrease contact between persons during an influenza pandemic have been included in pandemic response plans. We used stochastic simulation models to explore the effects of school closings, voluntary confinements of ill persons and their household contacts, and reductions in contacts among long-term care facility (LTCF) residents on pandemic-related illness and deaths. Our findings suggest that school closings would not have a substantial effect on pandemic-related outcomes in the absence of measures to reduce out-of-school contacts. However, if persons with influenzalike symptoms and their household contacts were encouraged to stay home, then rates of illness and death might be reduced by ≈50%. By preventing ill LTCF residents from making contact with other residents, illness and deaths in this vulnerable population might be reduced by ≈60%. Restricting the activities of infected persons early in a pandemic could decrease negative health impact. PMID:17553273

  9. Stability and control of robotic manipulators during contact/noncontact task transition

    SciTech Connect

    Mills, J.K.; Lokhorst, D.M. . Dept. of Mechanical Engineering)

    1993-06-01

    A control methodology that addresses the problem of control of robotic manipulators during a general class of task that requires the manipulator to transition from noncontact motion to contact motion and contact motion to noncontact motion is proposed. During noncontact motion, a control suitable for the noncontact phase of motion is applied; during contact, another control, suitable for contact motion, is applied. These different control schemes are applied to the manipulator such that the overall control is discontinuous in nature. The following closed-loop behavior is achieved: (1) the closed-loop system exhibits global asymptotic stability; (2) asymptotic trajectory tracking of generalized force and position inputs is achieved; and, significantly, (3) upon inadvertent loss of contact by the manipulator, contact is reestablished and generalized forces and positions are again achieved asymptotically. Experimental results, performed on a two-degree-of-freedom direct-drive robot, support the theoretical claims made in this work.

  10. Wraparound-contact solar cells

    NASA Technical Reports Server (NTRS)

    Baraona, C. R.; Klucher, T. M.; Thornhill, J. W.; Scott-Monck, J.

    1979-01-01

    Positive and negative electrical contacts are on back surface of wraparound-contact solar cell. With both terminals on nonilluminated side, cells can be connected back-to-back, and interconnection of many cells can be automated by using printed-circuit techniques. Cells are made by screen-printing layer of dielectric around edge of cell and extending top contact over dielectric to back surface. Wraparound also facilitates application of transparent covers and encapsulants. Efficiencies of cells are in excess of seventeen percent.

  11. The relation between body semantics and spatial body representations.

    PubMed

    van Elk, Michiel; Blanke, Olaf

    2011-11-01

    The present study addressed the relation between body semantics (i.e. semantic knowledge about the human body) and spatial body representations, by presenting participants with word pairs, one below the other, referring to body parts. The spatial position of the word pairs could be congruent (e.g. EYE / MOUTH) or incongruent (MOUTH / EYE) with respect to the spatial position of the words' referents. In addition, the spatial distance between the words' referents was varied, resulting in word pairs referring to body parts that are close (e.g. EYE / MOUTH) or far in space (e.g. EYE / FOOT). A spatial congruency effect was observed when subjects made an iconicity judgment (Experiments 2 and 3) but not when making a semantic relatedness judgment (Experiment 1). In addition, when making a semantic relatedness judgment (Experiment 1) reaction times increased with increased distance between the body parts but when making an iconicity judgment (Experiments 2 and 3) reaction times decreased with increased distance. These findings suggest that the processing of body-semantics results in the activation of a detailed visuo-spatial body representation that is modulated by the specific task requirements. We discuss these new data with respect to theories of embodied cognition and body semantics.

  12. 76 FR 21386 - National Cancer Institute; Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-15

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Cancer Institute; Notice of Closed Meeting... Health, 6116 Executive Blvd., Room 8018, Rockville, MD 20852. Contact Person: Shamala K. Srinivas,...

  13. [Obesity: stigmatization, discrimination, body image].

    PubMed

    Kinzl, Johann F

    2016-03-01

    Obesity is a heterogeneous condition with multifactorial genesis (genetic predisposition, life-style, psychosocial situation), but there is a relatively homogeneous negative stereotype of obese individuals, because overweight and obesity are seen as self-inflicted disorders caused by physical inactivity and disorderd eating behavior. Obese individuals are confronted with far-reaching stigmatization and discrimination. Typical stereotypes are laziness, unattractiveness, work refusal. This negative image by the environment contributes to negative self-awareness and self-stigmatization, accompanied by a poor self-esteem and feelings of poor self-control and reduced self-efficacy, resulting in poor constructive coping strategies for overweight reduction. In addition, a disturbed body image combined with deep dissatisfaction with their own body is often found in many obese individuals. There is not always a close connection between body weight and body dissatisfaction. Young women and individuals with a binge eating disorder often show an increased body dissatisfaction as well.

  14. Assessing the reliability of thermography to infer internal body temperatures of lizards.

    PubMed

    Barroso, Frederico M; Carretero, Miguel A; Silva, Francisco; Sannolo, Marco

    2016-12-01

    For many years lizard thermal ecology studies have relied on the use of contact thermometry to obtain internal body temperature (Tb) of the animals. However, with progressing technology, an interest grew in using new, less invasive methods, such as InfraRed (IR) pyrometry and thermography, to infer Tb of reptiles. Nonetheless few studies have tested the reliability of these new tools. The present study tested the use of IR cameras as a non-invasive tool to infer Tb of lizards, using three differently body-sized lacertid species (Podarcis virescens, Lacerta schreiberi and Timon lepidus). Given the occurrence of regional heterothermy, we pairwise compared thermography readings of six body parts (snout, eye, head, dorsal, hind limb, tail base) to cloacal temperature (measured by a thermometer-associated thermocouple probe) commonly employed to measure Tb in field and lab studies. The results showed moderate to strong correlations (R(2)=0.84-0.99) between all body parts and cloacal temperature. However, despite the readings on the tail base showed the strongest correlation in all three species, it was the eye where the absolute values and pattern of temperature change most consistently followed the cloacal measurements. Hence, we concluded that the eye would be the body location whose IR camera readings more closely approximate that of the animal's internal environment. Alternatively, other body parts can be used, provided that a careful calibration is carried out. We provide guidelines for future research using thermography to infer Tb of lizards.

  15. Medical management of contact dermatitis.

    PubMed

    Alexandroff, A B; Johnston, G A

    2009-10-01

    Allergic and irritant contact dermatitis are important dermatological problems. Although the frequencies of positive reactions to a number of allergens have decreased during last 30 years because of better avoidance (and at least in part due to improved legislation), contact allergy to other agents is rising. The medical treatment starts from a correct identification of triggers of contact dermatitis which could allow patients to reduce or avoid exposure to these agents in future. A good clinical history, examination and immunological tests including patch testing are of crucial importance at this stage. Further management includes emollients, topical and oral corticosteroids, topical calcineurin inhibitors, azathioprine and ciclosporin. Methotrexate and alitretinoin are recent additions to the armamentarium of dermatologists who manage contact dermatitis.

  16. EPA Alternative Dispute Resolution Contacts

    EPA Pesticide Factsheets

    The success of EPA's ADR efforts depends on a network of talented and experienced professionals in Headquarters offices and EPA Regions. For Agency-wide ADR information, please contact the Conflict Prevention and Resolution Center.

  17. Transition metal contacts to graphene

    SciTech Connect

    Politou, Maria De Gendt, Stefan; Heyns, Marc; Asselberghs, Inge; Radu, Iuliana; Conard, Thierry; Richard, Olivier; Martens, Koen; Huyghebaert, Cedric; Tokei, Zsolt; Lee, Chang Seung; Sayan, Safak

    2015-10-12

    Achieving low resistance contacts to graphene is a common concern for graphene device performance and hybrid graphene/metal interconnects. In this work, we have used the circular Transfer Length Method (cTLM) to electrically characterize Ag, Au, Ni, Ti, and Pd as contact metals to graphene. The consistency of the obtained results was verified with the characterization of up to 72 cTLM structures per metal. Within our study, the noble metals Au, Ag and Pd, which form a weaker bond with graphene, are shown to result in lower contact resistance (Rc) values compared to the more reactive Ni and Ti. X-ray Photo Electron Spectroscopy and Transmission Electron Microscopy characterization for the latter have shown the formation of Ti and Ni carbides. Graphene/Pd contacts show a distinct intermediate behavior. The weak carbide formation signature and the low Rc values measured agree with theoretical predictions of an intermediate state of weak chemisorption of Pd on graphene.

  18. Racial Disparity in Police Contacts

    PubMed Central

    Crutchfield, Robert D.; Haggerty, Kevin P.; McGlynn, Anne; Catalano, Richard F.

    2013-01-01

    Criminologists agree the race disparity in arrests cannot be fully explained by differences in criminal behavior. We examine social environment factors that may lead to racial differences in police contact in early adolescence, including family, peers, school, and community. Data are from 331 8th-grade students. Blacks were almost twice as likely as Whites to report a police contact. Blacks reported more property crime but not more violent crime than Whites. Police contacts were increased by having a parent who had been arrested, a sibling involved in criminal activity, higher observed reward for negative behavior, having school disciplinary actions, and knowing adults who engaged in substance abuse or criminal behavior. Race differences in police contacts were partially attributable to more school discipline. PMID:24363956

  19. Contact in Context: An Examination of Social Settings on Whites' Attitudes toward Interracial Marriage

    ERIC Educational Resources Information Center

    Johnson, Bryan R.; Jacobson, Cardell K.

    2005-01-01

    Using data from a "New York Times" poll conducted in 2000, we analyze whites' approval of interracial marriage by examining the contexts in which whites have contact with blacks. The contexts can be ordered by the type of contact they provide, from close and personal to distant or hierarchical. The results of our analysis show that the type of…

  20. Solution of dynamic contact problems by implicit/explicit methods. Final report

    SciTech Connect

    Salveson, M.W.; Taylor, R.L.

    1996-10-14

    The solution of dynamic contact problems within an explicit finite element program such as the LLNL DYNA programs is addressed in the report. The approach is to represent the solution for the deformation of bodies using the explicit algorithm but to solve the contact part of the problem using an implicit approach. Thus, the contact conditions at the next solution state are considered when computing the acceleration state for each explicit time step.

  1. Allergic Contact Dermatitis to Ophthalmic Medications: Relevant Allergens and Alternative Testing Methods.

    PubMed

    Grey, Katherine R; Warshaw, Erin M

    Allergic contact dermatitis is an important cause of periorbital dermatitis. Topical ophthalmic agents are relevant sensitizers. Contact dermatitis to ophthalmic medications can be challenging to diagnose and manage given the numerous possible offending agents, including both active and inactive ingredients. Furthermore, a substantial body of literature reports false-negative patch test results to ophthalmic agents. Subsequently, numerous alternative testing methods have been described. This review outlines the periorbital manifestations, causative agents, and alternative testing methods of allergic contact dermatitis to ophthalmic medications.

  2. Pose and motion from contact

    SciTech Connect

    Jia, Y.B.; Erdmann, M.

    1999-05-01

    In the absence of vision, grasping an object often relies on tactile feedback from the fingertips. As the finger pushes the object, the fingertip can feel the contact point move. If the object is known in advance, from this motion the finger may infer the location of the contact point on the object, and thereby, the object pose. This paper primarily investigates the problem of determining the pose (orientation and position) and motion (velocity and angular velocity) of a planar object with known geometry from such contact motion generated by pushing. A dynamic analysis of pushing yields a nonlinear system that relates through contact the object pose and motion to the finger motion. The contact motion on the fingertip thus encodes certain information about the object pose. Nonlinear observability theory is employed to show that such information is sufficient for the finger to observe not only the pose, but also the motion of the object. Therefore, a sensing strategy can be realized as an observer of the nonlinear dynamic system. Two observers are subsequently introduced. The first observer, based on the work of Gautheir, Hammouri, and Othman (1992), has its gain determined by the solution of a Lyapunov-like equation; it can be activated at any time instant during a push. The second observer, based on Newton`s method, solves for the initial (motionless) object pose from three intermediate contact points during a push. Under the Coulomb-friction model, the paper deals with support friction in the plane and/or contact friction between the finger and the object. Extensive simulations have been done to demonstrate the feasibility of the two observers. Preliminary experiments (with an Adept robot) have also been conducted. A contact sensor has been implemented using strain gauges.

  3. Method for lubricating contacting surfaces

    DOEpatents

    Dugger, Michael T [Tijeras, NM; Ohlhausen, James A [Albuquerque, NM; Asay, David B [Boalsburg, PA; Kim, Seong H [State College, PA

    2011-12-06

    A method is provided for tribological lubrication of sliding contact surfaces, where two surfaces are in contact and in motion relative to each other, operating in a vapor-phase environment containing at least one alcohol compound at a concentration sufficiently high to provide one monolayer of coverage on at least one of the surfaces, where the alcohol compound continuously reacts at the surface to provide lubrication.

  4. Closing the loop.

    PubMed

    Dassau, E; Atlas, E; Phillip, M

    2011-02-01

    Closed-loop algorithms can be found in every aspect of everyday modern life. Automation and control are used constantly to provide safety and to improve quality of life. Closed-loop systems and algorithms can be found in home appliances, automobiles, aviation and more. Can one imagine nowadays driving a car without ABS, cruise control or even anti-sliding control? Similar principles of automation and control can be used in the management of diabetes mellitus (DM). The idea of an algorithmic/technological way to control glycaemia is not new and has been researched for more than four decades. However, recent improvements in both glucose-sensing technology and insulin delivery together with advanced control and systems engineering made this dream of an artificial pancreas possible. The artificial pancreas may be the next big step in the treatment of DM since the use of insulin analogues. An artificial pancreas can be described as internal or external devices that use continuous glucose measurements to automatically manage exogenous insulin delivery with or without other hormones in an attempt to restore glucose regulation in individuals with DM using a control algorithm. This device as described can be internal or external; can use different types of control algorithms with bi-hormonal or uni-hormonal design; and can utilise different ways to administer them. The different designs and implementations have transitioned recently from in silico simulations to clinical evaluation stage with practical applications in mind. This may mark the beginning of a new era in diabetes management with the introduction of semi-closed-loop systems that can prevent or minimise nocturnal hypoglycaemia, to hybrid systems that will manage blood glucose (BG) levels with minimal user intervention to finally fully automated systems that will take the user out of the loop. More and more clinical trials will be needed for the artificial pancreas to become a reality but initial encouraging

  5. Young children's hand contact activities: an observational study via videotaping in primarily outdoor residential settings.

    PubMed

    Auyeung, Willa; Canales, Robert A; Beamer, Paloma; Ferguson, Alesia C; Leckie, James O

    2006-09-01

    Microlevel activity time series (MLATS) data were gathered on hand contact activities of 38 children (1-6 years old) by videotaping in primarily outdoor residential environments. The videotape recordings were then translated into text files using a specialized software called VirtualTimingDevicetrade mark. Contact frequency (contacts/h), duration per contact (s/contact), and hourly contact duration (min/h) were summarized for outdoor hand contacts with 15 distinct object/surface categories ("Animal", "Body", "Clothes/Towels", "Fabric", "Floor", "Food", "Footwear", "Metal", "Non-dietary Water", "Paper/Wrapper", "Plastic", "Rock/Brick", "Toys", "Vegetation/Grass", and "Wood") and two aggregate object/surface categories ("Non-dietary objects/surfaces" and "Total objects/surfaces"). For outdoor both hand contacts with "Total objects/surfaces", contact frequencies ranged from 229.9 to 1517.7 contacts/h, median durations/contact ranged from < 1 to 5 s, and hourly contact durations ranged from 42.6 to 102.2 m/h. The data were analyzed for significant differences in hand contact activities as a function of (1) age, (2) location, (3) gender, and (4) hand. Significant differences (P < or = 0.05) were found for all four factors analyzed. Hourly contact durations with "Non-dietary objects/surfaces" and "Total objects/surfaces" increased with age (P = 0.01, rs = 0.42 and P = 0.005, rs = 0.46, respectively), while contact frequencies and hourly contact durations with "Wood" decreased with age (P = 0.02, rs = -0.38 and P = 0.05, rs = -0.32, respectively). Location was found to affect contact frequencies and hourly contact durations with certain objects/surfaces. For example, contact frequencies and hourly contact durations with "Fabric" were higher indoors (P = 0.02 for both), while contact frequencies and hourly contact durations with "Vegetation/Grass" were higher outdoors (P = 0.02 and P = 0.04, respectively). Girls had longer hourly contact durations with "Footwear" (P = 0

  6. [Contact lens care and maintenance].

    PubMed

    Bloise, L

    2017-03-29

    All contact lenses with replacement schedules longer than daily must be maintained. At each step of their use, the lenses may be contaminated. Contact lens solutions perform the essential functions of cleaning, decontaminating and preserving the lenses to prevent infectious problems and improve wearing comfort. Contact lens contamination essentially comes from hands, cleaning solutions, cases, water and the environment. The pathogenic microorganisms are mainly Gram-negative bacteria, fungi and amoebae. Contact lens deposits may or may not have an organic origin. Their presence increases the risk of infection because they serve as a nutrient matrix for microbes, and they are responsible for wearing discomfort. Contact lens solutions differ in their composition, their mechanism of action and the concentration of the various agents. To prescribe the best lens care system to each wearer and for each material, it is necessary to be very familiar with them. Maintenance is the main cause of discomfort with contact lenses, either through improper use, solution-material incompatibility, or a reaction of the wearer to the components.

  7. Determination of the Contact Angle Based on the Casimir Effect

    NASA Technical Reports Server (NTRS)

    Mazuruk, K.; Volz, M. P.

    2015-01-01

    In several crystal growth processed based on capillarity, a melt comes into contact with a crucible wall at an angle defined as the contact angle. For molten metals and semiconductors, this contact angle is dependent upon both the crucible and melt material and typical values fall in the range 80-170deg. However, on a microscopic scale, there does not exist a precise and sharp contact angle but rather the melt and solid surfaces merge smoothly and continuously over a distance of up to several micrometers. Accurate modeling requires a more advanced treatment of this interaction. The interaction between the melt and solid surfaces can be calculated by considering two forces: a short-range repulsive force and a longer range (up to a few micrometers) Casimir force. The Casimir force between the two bodies of complex geometry is calculated using a retarded temperature Green's function (Matsubara type) for the photon in the medium. The governing equations are cast in the form of a set of boundary integral equations which are then solved numerically for the case of molten Ge on SiO2. The shape of the molten surface approaching the flat solid body is determined, and the contact angle is defined as the angle between the two surfaces at the microscopically asymptotic distance of 1-2 micrometers. The formulation of this model and the results of the numerical calculations will be presented and discussed.

  8. Do closed universes recollapse?

    NASA Astrophysics Data System (ADS)

    Tipler, Frank J.

    The conditions for recollapse in universes with compact maximal hypersurfaces are investigated theoretically, reviewing the results of recent investigations. The importance of recollapse for observational astrophysics is briefly discussed, and particular attention is given to the implications of maximal hypersurfaces and to recollapse in S3 Friedmann universes. It is conjectured that all globally hyperbolic C2 maximally extended spatially homogeneous closed universes with S3 or S2 x S1 topology and with stress-energy tensors obeying the strong-energy, positive-pressure, dominant-energy, and matter-regularity conditions do expand from an all-encompassing initial singularity to a maximal hypersurface and then recollapse to an all-encompassing final singularity.

  9. Development of living body information monitoring system

    NASA Astrophysics Data System (ADS)

    Sakamoto, Hidetoshi; Ohbuchi, Yoshifumi; Torigoe, Ippei; Miyagawa, Hidekazu; Murayama, Nobuki; Hayashida, Yuki; Igasaki, Tomohiko

    2010-03-01

    The easy monitoring systems of contact and non-contact living body information for preventing the the Sudden Infant Death Syndrome (SIDS) were proposed as an alternative monitoring system of the infant's vital information. As for the contact monitoring system, respiration sensor, ECG electrodes, thermistor and IC signal processor were integrated into babies' nappy holder. This contact-monitoring unit has RF transmission function and the obtained data are analyzed in real time by PC. In non-contact mortaring system, the infrared thermo camera was used. The surrounding of the infant's mouth and nose is monitored and the respiration rate is obtained by thermal image processing of its temperature change image of expired air. This proposed system of in-sleep infant's vital information monitoring system and unit are very effective as not only infant's condition monitoring but also nursing person's one.

  10. Development of living body information monitoring system

    NASA Astrophysics Data System (ADS)

    Sakamoto, Hidetoshi; Ohbuchi, Yoshifumi; Torigoe, Ippei; Miyagawa, Hidekazu; Murayama, Nobuki; Hayashida, Yuki; Igasaki, Tomohiko

    2009-12-01

    The easy monitoring systems of contact and non-contact living body information for preventing the the Sudden Infant Death Syndrome (SIDS) were proposed as an alternative monitoring system of the infant's vital information. As for the contact monitoring system, respiration sensor, ECG electrodes, thermistor and IC signal processor were integrated into babies' nappy holder. This contact-monitoring unit has RF transmission function and the obtained data are analyzed in real time by PC. In non-contact mortaring system, the infrared thermo camera was used. The surrounding of the infant's mouth and nose is monitored and the respiration rate is obtained by thermal image processing of its temperature change image of expired air. This proposed system of in-sleep infant's vital information monitoring system and unit are very effective as not only infant's condition monitoring but also nursing person's one.

  11. RF Sputtering of Gold Contacts On Niobium

    NASA Technical Reports Server (NTRS)

    Barr, D. W.

    1983-01-01

    Reliable gold contacts are deposited on niobium by combination of RF sputtering and photolithography. Process results in structures having gold only where desired for electrical contact. Contacts are stable under repeated cycling from room temperature to 4.2 K and show room-temperature contact resistance as much as 40 percent below indium contacts made by thermalcompression bonding.

  12. Solar cell with back side contacts

    SciTech Connect

    Nielson, Gregory N; Okandan, Murat; Cruz-Campa, Jose Luis; Resnick, Paul J; Wanlass, Mark Woodbury; Clews, Peggy J

    2013-12-24

    A III-V solar cell is described herein that includes all back side contacts. Additionally, the positive and negative electrical contacts contact compoud semiconductor layers of the solar cell other than the absorbing layer of the solar cell. That is, the positive and negative electrical contacts contact passivating layers of the solar cell.

  13. Contact Lens-Related Eye Infections

    MedlinePlus

    ... Stories Español Eye Health / Eye Health A-Z Contact Lens-Related Eye Infections Sections Contact Lens-Related ... About Contact Lenses Proper Care of Contact Lenses Contact Lens-Related Eye Infections Written by: Kierstan Boyd ...

  14. Measuring The Contact Resistances Of Photovoltaic Cells

    NASA Technical Reports Server (NTRS)

    Burger, D. R.

    1985-01-01

    Simple method devised to measure contact resistances of photovoltaic solar cells. Method uses readily available equipment and applicable at any time during life of cell. Enables evaluation of cell contact resistance, contact-end resistance, contact resistivity, sheet resistivity, and sheet resistivity under contact.

  15. Up close and personal

    NASA Astrophysics Data System (ADS)

    Williamson, Mark

    2009-03-01

    In 1609, when he peered expectantly through his handmade telescope at the mountains of the Moon and the four large satellites of Jupiter, Galileo Galilei could have had no idea that nearly four centuries later these astronomical bodies would be orbited by "artificial satellites" hand-built by like-minded inquisitors of the solar system. That one of these spacecraft would be named after him would probably have been dismissed as idle fantasy. However, the spacecraft known as Galileo, launched in 1989 and de-orbited into Jupiter's turbulent atmosphere in 2003, is just one of many interplanetary spacecraft dispatched to explore the solar system since the beginning of the space age in 1957.

  16. Crane-Load Contact Sensor

    NASA Technical Reports Server (NTRS)

    Youngquist, Robert; Mata, Carlos; Cox, Robert

    2005-01-01

    An electronic instrument has been developed as a prototype of a portable crane-load contact sensor. Such a sensor could be helpful in an application in which the load rests on a base in a horizontal position determined by vertical alignment pins (see Figure 1). If the crane is not positioned to lift the load precisely vertically, then the load can be expected to swing once it has been lifted clear of the pins. If the load is especially heavy, large, and/or fragile, it could hurt workers and/or damage itself and nearby objects. By indicating whether the load remains in contact with the pins when it has been lifted a fraction of the length of the pins, the crane-load contact sensor helps the crane operator determine whether it is safe to lift the load clear of the pins: If there is contact, then the load is resting against the sides of the pins and, hence, it may not be safe to lift; if contact is occasionally broken, then the load is probably not resting against the pins, so it should be safe to lift. It is assumed that the load and base, or at least the pins and the surfaces of the alignment holes in the load, are electrically conductive, so the instrument can use electrical contact to indicate mechanical contact. However, DC resistance cannot be used as an indicator of contact for the following reasons: The load and the base are both electrically grounded through cables (the load is grounded through the lifting cable of the crane) to prevent discharge of static electricity. In other words, the DC resistance between the load and the pins is always low, as though they were always in direct contact. Therefore, instead of DC resistance, the instrument utilizes the AC electrical impedance between the pins and the load. The signal frequency used in the measurement is high enough (.1 MHz) that the impedance contributed by the cables and the electrical ground network of the building in which the crane and the base are situated is significantly greater than the contact

  17. Ferromagnetic tunnel contacts to graphene: Contact resistance and spin signal

    SciTech Connect

    Cubukcu, M.; Laczkowski, P.; Vergnaud, C.; Marty, A.; Attané, J.-P.; Notin, L.; Vila, L. Jamet, M.; Martin, M.-B.; Seneor, P.; Anane, A.; Deranlot, C.; Fert, A.; Auffret, S.; Ducruet, C.

    2015-02-28

    We report spin transport in CVD graphene-based lateral spin valves using different magnetic contacts. We compared the spin signal amplitude measured on devices where the cobalt layer is directly in contact with the graphene to the one obtained using tunnel contacts. Although a sizeable spin signal (up to ∼2 Ω) is obtained with direct contacts, the signal is strongly enhanced (∼400 Ω) by inserting a tunnel barrier. In addition, we studied the resistance-area product (R.A) of a variety of contacts on CVD graphene. In particular, we compared the R.A products of alumina and magnesium oxide tunnel barriers grown by sputtering deposition of aluminum or magnesium and subsequent natural oxidation under pure oxygen atmosphere or by plasma. When using an alumina tunnel barrier on CVD graphene, the R.A product is high and exhibits a large dispersion. This dispersion can be highly reduced by using a magnesium oxide tunnel barrier, as for the R.A value. This study gives insight in the material quest for reproducible and efficient spin injection in CVD graphene.

  18. Polygyny: insufficient father-son contact and son's masculine identity.

    PubMed

    Kitahara, M

    1976-05-01

    In polygynous societies in which the family consists of husband, wives, and children only, if each cowife lives in a separate quarter with her children, males are more likely to be circumcised or segregated at puberty. These customs are interpreted as the measures to rectify boys' mother-oriented personality development because of limited contact with their fathers due to their mother's separate quarters. Circumcision and segregation can be explained better in terms of the son's insufficient contact with the father rather than a very close relationship with the mother due to the long postpartum sexual taboo.

  19. Trajectories in Close Proximity to Asteroids

    NASA Technical Reports Server (NTRS)

    Scheeres, D. J.

    2000-01-01

    Spacecraft motion in close proximity to irregularly shaped, rotating bodies such as asteroids presents a unique dynamical environment as compared to most space missions. There are several fundamental novelties in this environment that spacecraft must deal with. These include the possibility of orbital instabilities that can act over very short time spans (on the order of hours for some systems), possible non-uniform rotation of the central gravity field, divergence of traditional gravity field representations when close to the asteroid surface, dominance of perturbing forces, an extremely large asteroid model parameter space that must be prepared for in the absence of reliable information, and the possibility of employing new and novel trajectory control techniques such as hovering and repeated landings on the asteroid surface. An overview of how these novelties impact the space of feasible close proximity operations and how different asteroid model properties will affect their implementation is given. In so doing, four fundamental types of close proximity operations will be defined. Listed in order of increasing technical difficulty these are: (1) close, stable orbits; (2) low-altitude flyovers; (3) landing trajectories; and (4) hovering trajectories. The feasibility and difficulty of implementing these operations will vary as a function of the asteroid shape, size, density, and rotation properties, and as a function of the spacecraft navigation capability. Additional information is contained in the original extended abstract.

  20. Nickel Silicide Metallization for Passivated Tunneling Contacts for Silicon Solar Cells

    SciTech Connect

    Marshall, Alexander; Florent, Karine; Tapriya, Astha; Lee, Benjamin G.; Kurinec, Santosh K.; Young, David L.

    2016-11-21

    Passivated tunneling contacts offer promise for applications in Interdigitated Back Passivated Contact (IBPC) high efficiency silicon solar cells. Metallization of these contacts remains a key research topic. This paper investigates NiSi/poly-Si/SiO2/c-Si passivated contacts using photoluminescence and contact resistivity measurements. An amorphous Si interlayer between the NiSi and poly-Si is observed to improve passivation, decreasing recombination. The overall recombination loss has a linear trend with the NiSi thickness. Implied Voc values close to 700 mV and contact resistivities below 10 mohm-cm2 have been achieved in NiSi/poly-Si:P/SiO2/c-Si contacts.

  1. Shigella Infections in Household Contacts of Pediatric Shigellosis Patients in Rural Bangladesh.

    PubMed

    George, Christine Marie; Ahmed, Shahnawaz; Talukder, Kaisar A; Azmi, Ishrat J; Perin, Jamie; Sack, R Bradley; Sack, David A; Stine, O Colin; Oldja, Lauren; Shahnaij, Mohammad; Chakraborty, Subhra; Parvin, Tahmina; Bhuyian, Sazzadul Islam; Bouwer, Edward; Zhang, Xiaotong; Hasan, Trisheeta N; Luna, Sharmin J; Akter, Fatema; Faruque, Abu S G

    2015-11-01

    To examine rates of Shigella infections in household contacts of pediatric shigellosis patients, we followed contacts and controls prospectively for 1 week after the index patient obtained care. Household contacts of patients were 44 times more likely to develop a Shigella infection than were control contacts (odds ratio 44.7, 95% CI 5.5-361.6); 29 (94%) household contacts of shigellosis patients were infected with the same species and serotype as the index patient's. Pulsed-field gel electrophoresis showed that 14 (88%) of 16 with infected contacts had strains that were indistinguishable from or closely related to the index patient's strain. Latrine area fly counts were higher in patient households compared with control households, and 2 patient household water samples were positive for Shigella. We show high susceptibility of household contacts of shigellosis patients to Shigella infections and found environmental risk factors to be targeted in future interventions.

  2. Contact structure for use in catalytic distillation

    DOEpatents

    Jones, Jr., Edward M.

    1985-01-01

    A method and apparatus for conducting catalytic chemical reactions and fractionation of the reaction mixture, comprising and feeding reactants into a distillation column reactor contracting said reactant in a liquid phase with a fixed bed catalyst in the form of a contact catalyst structure, consisting of closed porous containers containing the catalyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column.

  3. Contact structure for use in catalytic distillation

    DOEpatents

    Jones, E.M. Jr.

    1985-08-20

    A method and apparatus are disclosed for conducting catalytic chemical reactions and fractionation of the reaction mixture, comprising and feeding reactants into a distillation column reactor contracting said reactant in a liquid phase with a fixed bed catalyst in the form of a contact catalyst structure, consisting of closed porous containers containing the catalyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column. 7 figs.

  4. Contact structure for use in catalytic distillation

    DOEpatents

    Jones, E.M. Jr.

    1984-03-27

    A method is described for conducting catalytic chemical reactions and fractionation of the reaction mixture comprising feeding reactants into a distillation column reactor, contracting said reactant in liquid phase with a fixed bed catalyst in the form of a contact catalyst structure consisting of closed porous containers containing the catalyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column. 7 figs.

  5. Contact structure for use in catalytic distillation

    DOEpatents

    Jones, Jr., Edward M.

    1984-01-01

    A method for conducting catalytic chemical reactions and fractionation of the reaction mixture comprising feeding reactants into a distillation column reactor contracting said reactant in liquid phase with a fixed bed catalyst in the form of a contact catalyst structure consisting of closed porous containers containing the catatlyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column.

  6. 78 FR 45933 - National Heart, Lung, and Blood Institute; Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-30

    ... HUMAN SERVICES National Institutes of Health National Heart, Lung, and Blood Institute; Notice of Closed... of Committee: National Heart, Lung, and Blood Institute Special Emphasis Panel Cardiovascular... (Telephone Conference Call). Contact Person: Susan Wohler Sunnarborg, Ph.D., Scientific Review...

  7. 75 FR 1794 - National Institute of Nursing Research; Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-13

    ... HUMAN SERVICES National Institutes of Health National Institute of Nursing Research; Notice of Closed... of Committee: National Institute of Nursing Research Special Emphasis Panel, Predoctoral Individual.... Contact Person: Weiqun Li, MD, Scientific Review Administrator, National Institute of Nursing...

  8. A general-purpose contact detection algorithm for nonlinear structural analysis codes

    SciTech Connect

    Heinstein, M.W.; Attaway, S.W.; Swegle, J.W.; Mello, F.J.

    1993-05-01

    A new contact detection algorithm has been developed to address difficulties associated with the numerical simulation of contact in nonlinear finite element structural analysis codes. Problems including accurate and efficient detection of contact for self-contacting surfaces, tearing and eroding surfaces, and multi-body impact are addressed. The proposed algorithm is portable between dynamic and quasi-static codes and can efficiently model contact between a variety of finite element types including shells, bricks, beams and particles. The algorithm is composed of (1) a location strategy that uses a global search to decide which slave nodes are in proximity to a master surface and (2) an accurate detailed contact check that uses the projected motions of both master surface and slave node. In this report, currently used contact detection algorithms and their associated difficulties are discussed. Then the proposed algorithm and how it addresses these problems is described. Finally, the capability of the new algorithm is illustrated with several example problems.

  9. Out-of-Body Experience and Autoscopy of Neurological Origin

    ERIC Educational Resources Information Center

    Blanke, Olaf; Landis, Theodor; Spinelli, Laurent; Seeck,Margitta

    2004-01-01

    During an out-of-body experience (OBE), the experient seems to be awake and to see his body and the world from a location outside the physical body. A closely related experience is autoscopy (AS), which is characterized by the experience of seeing one's body in extrapersonal space. Yet, despite great public interest and many case studies,…

  10. An interaction stress analysis of nanoscale elastic asperity contacts.

    PubMed

    Rahmat, Meysam; Ghiasi, Hossein; Hubert, Pascal

    2012-01-07

    A new contact mechanics model is presented and experimentally examined at the nanoscale. The current work addresses the well-established field of contact mechanics, but at the nanoscale where interaction stresses seem to be effective. The new model combines the classic Hertz theory with the new interaction stress concept to provide the stress field in contact bodies with adhesion. Hence, it benefits from the simplicity of non-adhesive models, while offering the same applicability as more complicated models. In order to examine the model, a set of atomic force microscopy experiments were performed on substrates made from single-walled carbon nanotube buckypaper. The stress field in the substrate was obtained by superposition of the Hertzian stress field and the interaction stress field, and then compared to other contact models. Finally, the effect of indentation depth on the stress field was studied for the interaction model as well as for the Hertz, Derjaguin-Muller-Toporov, and Johnson-Kendall-Roberts models. Thus, the amount of error introduced by using the Hertz theory to model contacts with adhesion was found for different indentation depths. It was observed that in the absence of interaction stress data, the Hertz theory predictions led to smaller errors compared to other contact-with-adhesion models.

  11. Accurate orbit propagation with planetary close encounters

    NASA Astrophysics Data System (ADS)

    Baù, Giulio; Milani Comparetti, Andrea; Guerra, Francesca

    2015-08-01

    We tackle the problem of accurately propagating the motion of those small bodies that undergo close approaches with a planet. The literature is lacking on this topic and the reliability of the numerical results is not sufficiently discussed. The high-frequency components of the perturbation generated by a close encounter makes the propagation particularly challenging both from the point of view of the dynamical stability of the formulation and the numerical stability of the integrator. In our approach a fixed step-size and order multistep integrator is combined with a regularized formulation of the perturbed two-body problem. When the propagated object enters the region of influence of a celestial body, the latter becomes the new primary body of attraction. Moreover, the formulation and the step-size will also be changed if necessary. We present: 1) the restarter procedure applied to the multistep integrator whenever the primary body is changed; 2) new analytical formulae for setting the step-size (given the order of the multistep, formulation and initial osculating orbit) in order to control the accumulation of the local truncation error and guarantee the numerical stability during the propagation; 3) a new definition of the region of influence in the phase space. We test the propagator with some real asteroids subject to the gravitational attraction of the planets, the Yarkovsky and relativistic perturbations. Our goal is to show that the proposed approach improves the performance of both the propagator implemented in the OrbFit software package (which is currently used by the NEODyS service) and of the propagator represented by a variable step-size and order multistep method combined with Cowell's formulation (i.e. direct integration of position and velocity in either the physical or a fictitious time).

  12. The closed fuel cycle

    SciTech Connect

    Froment, Antoine; Gillet, Philippe

    2007-07-01

    Available in abstract form only. Full text of publication follows: The fast growth of the world's economy coupled with the need for optimizing use of natural resources, for energy security and for climate change mitigation make energy supply one of the 21. century most daring challenges. The high reliability and efficiency of nuclear energy, its competitiveness in an energy market undergoing a new oil shock are as many factors in favor of the 'renaissance' of this greenhouse gas free energy. Over 160,000 tHM of LWR1 and AGR2 Used Nuclear Fuel (UNF) have already been unloaded from the reactor cores corresponding to 7,000 tons discharged per year worldwide. By 2030, this amount could exceed 400,000 tHM and annual unloading 14,000 tHM/year. AREVA believes that closing the nuclear fuel cycle through the treatment and recycling of Used Nuclear Fuel sustains the worldwide nuclear power expansion. It is an economically sound and environmentally responsible choice, based on the preservation of natural resources through the recycling of used fuel. It furthermore provides a safe and secure management of wastes while significantly minimizing the burden left to future generations. (authors)

  13. 78 FR 30303 - National Contact Center; Submission for OMB Review; National Contact Center Customer Evaluation...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-22

    ... ADMINISTRATION National Contact Center; Submission for OMB Review; National Contact Center Customer Evaluation Survey AGENCY: Contact Center Services, Federal Citizen Information Center, Office of Citizen Services... requirement regarding the National Contact Center customer evaluation surveys. In this request, the...

  14. 78 FR 14549 - National Contact Center; Information Collection; National Contact Center Customer Evaluation Survey

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-06

    ... ADMINISTRATION National Contact Center; Information Collection; National Contact Center Customer Evaluation Survey AGENCY: Contact Center Services, Federal Citizen Information Center, Office of Citizen Services... requirement regarding the National Contact Center customer evaluation surveys. In this request, the...

  15. AL Cassiopeiae: An F-type contact binary system with a cool stellar companion

    SciTech Connect

    Qian, S.-B.; Zhou, X.; Zhu, L.-Y.; Zhao, E.-G.; Liao, W.-P.; Zola, S.; Leung, K.-C.

    2014-11-01

    According to the general catalog of variable stars, AL Cas was classified as an EW-type eclipsing binary with a spectral type of B and an orbital period of P = 0.5005555 days. The first photometric light curves of the close binary in the B, V, R, and I bands are presented. New low-resolution spectra indicate that its spectral type is about F7 rather than B-type. A photometric analysis with the Wilson-Devinney method suggests that it is a contact binary (f = 39.3%) with a mass ratio of 0.61. Using 17 newly determined eclipse times together with those collected from the literature, we found that the observed–calculated (O – C) curve of AL Cas shows a cyclic change with a period of 86.6 yr and an amplitude of 0.0181 days. The periodic variation was analyzed for the light-travel time effect via the presence of a third body. The mass of the third body was determined to be M {sub 3}sin i' = 0.29(± 0.05) M {sub ☉} when a total mass of 2.14 M {sub ☉} for AL Cas is adopted. It is expected that the cool companion star may have played an important role in the origin and evolution of the system by removing angular momentum from the central binary system during early dynamical interaction and/or late dynamical evolution. This causes the original detached system to have a low angular momentum and a short initial orbital period. Then it can evolve into the present contact configuration via a case A mass transfer.

  16. Marine Bioinspired Underwater Contact Adhesion.

    PubMed

    Clancy, Sean K; Sodano, Antonio; Cunningham, Dylan J; Huang, Sharon S; Zalicki, Piotr J; Shin, Seunghan; Ahn, B Kollbe

    2016-05-09

    Marine mussels and barnacles are sessile biofouling organisms that adhere to a number of surfaces in wet environments and maintain remarkably strong bonds. Previous synthetic approaches to mimic biological wet adhesive properties have focused mainly on the catechol moiety, present in mussel foot proteins (mfps), and especially rich in the interfacial mfps, for example, mfp-3 and -5, found at the interface between the mussel plaque and substrate. Barnacles, however, do not use Dopa for their wet adhesion, but are instead rich in noncatecholic aromatic residues. Due to this anomaly, we were intrigued to study the initial contact adhesion properties of copolymerized acrylate films containing the key functionalities of barnacle cement proteins and interfacial mfps, for example, aromatic (catecholic or noncatecholic), cationic, anionic, and nonpolar residues. The initial wet contact adhesion of the copolymers was measured using a probe tack testing apparatus with a flat-punch contact geometry. The wet contact adhesion of an optimized, bioinspired copolymer film was ∼15.0 N/cm(2) in deionized water and ∼9.0 N/cm(2) in artificial seawater, up to 150 times greater than commercial pressure-sensitive adhesive (PSA) tapes (∼0.1 N/cm(2)). Furthermore, maximum wet contact adhesion was obtained at ∼pH 7, suggesting viability for biomedical applications.

  17. Contact tracing and disease control.

    PubMed Central

    Eames, Ken T D; Keeling, Matt J

    2003-01-01

    Contact tracing, followed by treatment or isolation, is a key control measure in the battle against infectious diseases. It is an extreme form of locally targeted control, and as such has the potential to be highly efficient when dealing with low numbers of cases. For this reason it is frequently used to combat sexually transmitted diseases and new invading pathogens. Accurate modelling of contact tracing requires explicit information about the disease-transmission pathways from each individual, and hence the network of contacts. Here, pairwise-approximation methods and full stochastic simulations are used to investigate the utility of contact tracing. A simple relationship is found between the efficiency of contact tracing necessary for eradication and the basic reproductive ratio of the disease. This holds for a wide variety of realistic situations including heterogeneous networks containing core-groups or super-spreaders, and asymptomatic individuals. Clustering (transitivity) within the transmission network is found to destroy the relationship, requiring lower efficiency than predicted. PMID:14728778

  18. Contact electrification of insulating materials

    NASA Astrophysics Data System (ADS)

    Lacks, Daniel J.; Mohan Sankaran, R.

    2011-11-01

    The electrostatic charge that is generated when two materials are contacted or rubbed and then separated is a well-known physical process that has been studied for more than 2500 years. Contact electrification occurs in many contexts, both natural and technological. For example, in dust storms the collisions between particles lead to electrostatic charging and in extreme cases, extraordinary lightning displays. In electrophotography, toner particles are intentionally charged to guide their deposition in well-defined patterns. Despite such a long history and so many important consequences, a fundamental understanding of the mechanism behind contact electrification remains elusive. An open question is what type of species are transferred between the surfaces to generate charge—experiments suggest various species ranging from electrons to ions to nanoscopic bits of material, and theoretical work suggests that non-equilibrium states may play an important role. Another open question is the contact electrification that occurs when two insulating materials with identical physical properties touch—since there is no apparent driving force, it is not clear why charge transfer occurs. A third open question involves granular systems—models and experiments have shown that a particle-size dependence for the charging often exists. In this review, we discuss the fundamental aspects of contact electrification and highlight recent research efforts aimed at understanding these open questions.

  19. Antibacterial surface design - Contact kill

    NASA Astrophysics Data System (ADS)

    Kaur, Rajbir; Liu, Song

    2016-08-01

    Designing antibacterial surfaces has become extremely important to minimize Healthcare Associated Infections which are a major cause of mortality worldwide. A previous biocide-releasing approach is based on leaching of encapsulated biocides such as silver and triclosan which exerts negative impacts on the environment and potentially contributes to the development of bacterial resistance. This drawback of leachable compounds led to the shift of interest towards a more sustainable and environmentally friendly approach: contact-killing surfaces. Biocides that can be bound onto surfaces to give the substrates contact-active antibacterial activity include quaternary ammonium compounds (QACs), quaternary phosphoniums (QPs), carbon nanotubes, antibacterial peptides, and N-chloramines. Among the above, QACs and N-chloramines are the most researched contact-active biocides. We review the engineering of contact-active surfaces using QACs or N-chloramines, the modes of actions as well as the test methods. The charge-density threshold of cationic surfaces for desired antibacterial efficacy and attempts to combine various biocides for the generation of new contact-active surfaces are discussed in detail. Surface positive charge density is identified as a key parameter to define antibacterial efficacy. We expect that this research field will continue to attract more research interest in view of the potential impact of self-disinfective surfaces on healthcare-associated infections, food safety and corrosion/fouling resistance required on industrial surfaces such as oil pipes and ship hulls.

  20. Dermatitis, contact on the cheek (image)

    MedlinePlus

    ... skin inflammation (dermatitis) on the cheek caused by contact with a substance that produced an allergic reaction (allergen). Contact dermatitis causes redness, itching, and small blisters (vesicles).

  1. Close to the Sky

    NASA Astrophysics Data System (ADS)

    2007-11-01

    Today, a new ALMA outreach and educational book was publicly presented to city officials of San Pedro de Atacama in Chile, as part of the celebrations of the anniversary of the Andean village. ESO PR Photo 50a/07 ESO PR Photo 50a/07 A Useful Tool for Schools Entitled "Close to the sky: Biological heritage in the ALMA area", and edited in English and Spanish by ESO in Chile, the book collects unique on-site observations of the flora and fauna of the ALMA region performed by experts commissioned to investigate it and to provide key initiatives to protect it. "I thank the ALMA project for providing us a book that will surely be a good support for the education of children and youngsters of San Pedro de Atacama. Thanks to this publication, we expect our rich flora and fauna to be better known. I invite teachers and students to take advantage of this educational resource, which will be available in our schools", commented Ms. Sandra Berna, the Mayor of San Pedro de Atacama, who was given the book by representatives of the ALMA global collaboration project. Copies of the book 'Close to the sky' will be donated to all schools in the area, as a contribution to the education of students and young people in northern Chile. "From the very beginning of the project, ALMA construction has had a firm commitment to environment and local culture, protecting unique flora and fauna species and preserving old estancias belonging to the Likan Antai culture," said Jacques Lassalle, who represented ALMA at the hand-over. "Animals like the llama, the fox or the condor do not only live in the region where ALMA is now being built, but they are also key elements of the ancient Andean constellations. In this sense they are part of the same sky that will be explored by ALMA in the near future." ESO PR Photo 50c/07 ESO PR Photo 50c/07 Presentation of the ALMA book The ALMA Project is a giant, international observatory currently under construction on the high-altitude Chajnantor site in Chile

  2. Lewy bodies

    PubMed Central

    Shults, Clifford W.

    2006-01-01

    Lewy bodies (LB) in the substantia nigra are a cardinal pathological feature of Parkinson's disease, but they occur in a number of neurodegenerative diseases and can be widespread in the nervous system. The characteristics, locations, and composition of LB are reviewed, with particular attention to α-synuclein (α-SYN), which appears to be the major component of LB. The propensity for α-SYN, a presynaptic protein widely expressed in the brain, to aggregate is because of an amyloidogenic central region. The factors that favor the aggregation of α-SYN and mechanisms of toxicity are examined, and a mechanism through which aggregates of α-SYN could induce mitochondrial dysfunction and/or release of proapoptotic molecules is proposed. PMID:16449387

  3. Contacts de langues et representations (Language Contacts and Representations).

    ERIC Educational Resources Information Center

    Matthey, Marinette, Ed.

    1997-01-01

    Essays on language contact and the image of language, entirely in French, include: "Representations 'du' contexte et representations 'en' contexte? Eleves et enseignants face a l'apprentissage de la langue" ("Representations 'of' Context or Representations 'in' Context? Students and Teachers Facing Language Learning" (Laurent…

  4. Estimating the role of casual contact from the community in transmission of Bordetella pertussis to young infants

    PubMed Central

    Wendelboe, Aaron M; Hudgens, Michael G; Poole, Charles; Van Rie, Annelies

    2007-01-01

    The proportion of infant pertussis cases due to transmission from casual contact in the community has not been estimated since before the introduction of pertussis vaccines in the 1950s. This study aimed to estimate the proportion of pertussis transmission due to casual contact using demographic and clinical data from a study of 95 infant pertussis cases and their close contacts enrolled at 14 hospitals in France, Germany, Canada, and the U.S. between February 2003 and September 2004. A complete case analysis was conducted as well as multiple imputation (MI) to account for missing data for participants and close contacts who did not participate. By considering all possible close contacts, the MI analysis estimated 66% of source cases were close contacts, implying the minimum attributable proportion of infant cases due to transmission from casual contact with community members was 34% (95% CI = 24%, 44%). Estimates from the complete case analysis were comparable but less precise. Results were sensitive to changes in the operational definition of a source case, which broadened the range of MI point estimates of transmission from casual community contact to 20%–47%. We conclude that casual contact appears to be responsible for a substantial proportion of pertussis transmission to young infants. Medical subject headings (MeSH): multiple imputation, pertussis, transmission, casual contact, sensitivity analysis, missing data, community. PMID:17949498

  5. Body piercing complicated by atypical mycobacterial infections.

    PubMed

    Ferringer, Tammie; Pride, Howard; Tyler, William

    2008-01-01

    Body piercing is a growing trend, especially in young people, but the literature on complications of piercing consists mostly of case reports involving ear piercing. Previous reported complications of piercing include contact dermatitis, keloids, traumatic tearing, viral transmission, and bacterial infections. We report two patients who presented with atypical mycobacterial infections of body piercing sites. It is important to recognize the association of piercing and mycobacterial infections so that tissue can be obtained for histopathologic examination and appropriate culture.

  6. Point contact silicon solar cells

    NASA Technical Reports Server (NTRS)

    Swanson, R. M.

    1986-01-01

    The construction of a 22.2% efficient single-crystal silicon solar cell fabricated at Stanford University is described. The cell dimensions were 3 x 5 mm and 100 microns thick with a base lifetime of 500 microseconds. The cell featured light trapping between a texturized top surface and a reflective bottom surface, small point contact diffusions, alternating between n-type and p-type in a polka-dot pattern on the bottom surface, and a surface passivation on all surfaces between contact regions.

  7. Allergic contact dermatitis and cosmetics.

    PubMed

    Watkins, Shannon; Zippin, Jonathan

    2012-10-01

    Contact dermatitis is a common dermatologic condition that can result from exposure to allergens at home or at work. Cosmetics represent a large diverse group of products that Americans apply to their skin to treat disease or enhance beauty. With increased use of cosmetics, the rate of sensitization to many allergenic components has increased. We review the more common allergens present in cosmetics as well as the types of cosmetics that are known to contain them. With proper education and patch testing, dermatologists will be able to identify contact allergies to cosmetic ingredients and help patients avoid the offending products.

  8. Close Reading in Elementary Schools

    ERIC Educational Resources Information Center

    Fisher, Douglas; Frey, Nancy

    2012-01-01

    Close reading is a recommended instructional approach to meet the challenges of teaching complex texts. But close readings are more common in high school and college than in elementary schools. In this article, we identify the components of close reading that were developed after a group of elementary school teachers observed their colleges in…

  9. Thermal and electrical contact conductance studies

    NASA Technical Reports Server (NTRS)

    Vansciver, S. W.; Nilles, M.

    1985-01-01

    Prediction of electrical and thermal contact resistance for pressed, nominally flat contacts is complicated by the large number of variables which influence contact formation. This is reflected in experimental results as a wide variation in contact resistances, spanning up to six orders of magnitude. A series of experiments were performed to observe the effects of oxidation and surface roughness on contact resistance. Electrical contact resistance and thermal contact conductance from 4 to 290 K on OFHC Cu contacts are reported. Electrical contact resistance was measured with a 4-wire DC technique. Thermal contact conductance was determined by steady-state longitudinal heat flow. Corrections for the bulk contribution ot the overall measured resistance were made, with the remaining resistance due solely to the presence of the contact.

  10. Analytical and experimental evaluation of biaxial contact stress

    NASA Technical Reports Server (NTRS)

    Richerson, D. W.; Finger, D. G.; Wimmer, J. M.

    1981-01-01

    Contact stress analysis was conducted for ceramic-metal and ceramic-ceramic interfaces using a finite element model. Ceramics investigated included NC-132 hot-pressed silicon nitride, NC-350 reaction-bonded silicon nitride, Hexaloy SA SiC, and RBN104 reaction-bonded silicon nitride. The results are shown to be well correlated with closed-form solution both for normal and normal-tangential loading. The latter load condition is found to be especially critical for ceramic materials due to the presence of a high tensile stress at the trailing edge of the ceramic surface contact zone. It is shown that during sliding contact or biaxial loading, the magnitude of this tensile stress increases with the coefficient of friction.

  11. Contact urticaria, allergic contact dermatitis, and photoallergic contact dermatitis from oxybenzone.

    PubMed

    Landers, Maeran; Law, Sandra; Storrs, Frances J

    2003-03-01

    There is little literature regarding conventional patch tests and photopatch tests to oxybenzone resulting in both immediate- and delayed-type hypersensitivity reactions. A patient was patch-tested and photopatch-tested to various sunscreen chemicals. Both immediate- and delayed-type hypersensitivity reactions were observed with oxybenzone. The positive patch tests were also photoaccentuated. Oxybenzone, a common sunscreen allergen, can result in both contact urticaria and delayed-type hypersensitivity on both conventional patch testing and photopatch testing. Allergic contact dermatitis to sunscreen chemicals has traditionally included contact urticaria, allergic contact dermatitis, and photoallergic contact dermatitis. Due to the recognition of p-aminobenzoic acid (PABA) and its esters as sensitizers, the presence of benzophenones in "PABA-free" sunscreens has become more prevalent, especially in sunscreens with a sun protection factor (SPF) greater than 8. In our patient, immediate- and delayed-type hypersensitivity reactions were seen to oxybenzone (2-hydroxy-4-methoxybenzophenone, 2-benzoyl-5-methoxyphenol, benzophenone-3, Eusolex 4360, Escalol 567, EUSORB 228, Spectra-Sorb UV-9, Uvinul M-40) upon conventional patch testing and photopatch testing.

  12. Imaging surface contacts: Power law contact distributions and contact stresses in quartz, calcite, glass and acrylic plastic

    USGS Publications Warehouse

    Dieterich, J.H.; Kilgore, B.D.

    1996-01-01

    A procedure has been developed to obtain microscope images of regions of contact between roughened surfaces of transparent materials, while the surfaces are subjected to static loads or undergoing frictional slip. Static loading experiments with quartz, calcite, soda-lime glass and acrylic plastic at normal stresses to 30 MPa yield power law distributions of contact areas from the smallest contacts that can be resolved (3.5 ??m2) up to a limiting size that correlates with the grain size of the abrasive grit used to roughen the surfaces. In each material, increasing normal stress results in a roughly linear increase of the real area of contact. Mechanisms of contact area increase are by growth of existing contacts, coalescence of contacts and appearance of new contacts. Mean contacts stresses are consistent with the indentation strength of each material. Contact size distributions are insensitive to normal stress indicating that the increase of contact area is approximately self-similar. The contact images and contact distributions are modeled using simulations of surfaces with random fractal topographies. The contact process for model fractal surfaces is represented by the simple expedient of removing material at regions where surface irregularities overlap. Synthetic contact images created by this approach reproduce observed characteristics of the contacts and demonstrate that the exponent in the power law distributions depends on the scaling exponent used to generate the surface topography.

  13. Do embryonic polar bodies commit suicide?

    PubMed

    Fabian, Dušan; Čikoš, Štefan; Rehák, Pavol; Koppel, Juraj

    2014-02-01

    The extrusion and elimination of unnecessary gametic/embryonic material is one of the key events that determines the success of further development in all living organisms. Oocytes produce the first polar body to fulfill the maturation process just before ovulation, and release the second polar body immediately after fertilization. The aim of this study was to compile a physiological overview of elimination of polar bodies during early preimplantation development in mice. Our results show that three-quarters of the first polar bodies were lost even at the zygotic stage; the 4-cell stage embryos contained only one (second) polar body, and the elimination of second polar bodies proceeded continuously during later development. Both first and second polar bodies showed several typical features of apoptosis: phosphatidylserine redistribution (observed for the first time in the first polar body), specific DNA degradation, condensed nuclear morphology, and inability to exclude cationic dye from the nucleus during the terminal stage of the apoptotic process. Caspase-3 activity was recorded only in the second polar body. From the morphological point of view, mouse polar bodies acted very similarly to damaged embryonic cells which have lost contact with their neighboring blastomeres. In conclusion, polar bodies possess all the molecular equipment necessary for triggering and executing an active suicide process. Furthermore, similarly as in dying embryonic cells, stressing external conditions (culture in vitro) might accelerate and increase the incidence of apoptotic elimination of the polar bodies in embryos.

  14. Microelectromechanical systems contact stress sensor

    DOEpatents

    Kotovsky, Jack

    2007-12-25

    A microelectromechanical systems stress sensor comprising a microelectromechanical systems silicon body. A recess is formed in the silicon body. A silicon element extends into the recess. The silicon element has limited freedom of movement within the recess. An electrical circuit in the silicon element includes a piezoresistor material that allows for sensing changes in resistance that is proportional to bending of the silicon element.

  15. Existence and Regularity for Dynamic Viscoelastic Adhesive Contact with Damage

    SciTech Connect

    Kuttler, Kenneth L. Shillor, Meir Fernandez, Jose R.

    2006-01-15

    A model for the dynamic process of frictionless adhesive contact between a viscoelastic body and a reactive foundation, which takes into account the damage of the material resulting from tension or compression, is presented. Contact is described by the normal compliance condition. Material damage is modelled by the damage field, which measures the pointwise fractional decrease in the load-carrying capacity of the material, and its evolution is described by a differential inclusion. The model allows for different damage rates caused by tension or compression. The adhesion is modelled by the bonding field, which measures the fraction of active bonds on the contact surface. The existence of the unique weak solution is established using the theory of set-valued pseudomonotone operators introduced by Kuttler and Shillor (1999). Additional regularity of the solution is obtained when the problem data is more regular and satisfies appropriate compatibility conditions.

  16. Contact stresses in pin-loaded orthotropic plates

    NASA Technical Reports Server (NTRS)

    Hyer, M. W.; Klang, E. C.

    1984-01-01

    The effects of pin elasticity, friction, and clearance on the stresses near the hole in a pin-loaded orthotropic plate are described. The problem is modeled as a contact elasticity problem using complex variable theory, the pin and the plate being two elastic bodies interacting through contact. This modeling is in contrast to previous works which assumed that the pin is rigid or that it exerts a known cosinusoidal radial traction on the hole boundary. Neither of these approaches explicitly involves a pin. A collocation procedure and iteration were used to obtain numerical results for a variety of plate and pin elastic properties and various levels of friction and clearance. Collocation was used to enforce the boundary and iteration was used to find the contact and no-slip regions on the boundary. Details of the numerical scheme are discussed.

  17. PROPERTIES OF THE CLOSE-IN TERTIARY IN THE QUADRUPLE SYSTEM V401 CYG

    SciTech Connect

    Zhu, L.-Y.; Qian, S.-B.; Zhou, X.; Li, L.-J.; Zhao, E.-G.; Liu, L.; Liu, N.-P.

    2013-08-01

    V401 Cyg is a quadruple system in which the spectroscopic signature of a close-in tertiary and a distant visual companion star were reported. Orbital properties of the close-in companion should provide valuable information on the formation of close binaries and stellar dynamical interaction. By analyzing new times of minimum light together with those collected from the literature, we discovered that the observed-calculated (O - C) curve of V401 Cyg shows a cyclic change with a short period of 3.5 yr and a semi-amplitude of 0.00436 days while it undergoes an upward parabolic variation. Those photoelectric and CCD data covered more than two cycles and were analyzed for the light-travel time effect via the presence of the tertiary companion. The mass of the third body was determined to be M{sub 3}sin i' = 0.65({+-} 0.08) M{sub Sun }, which is close to the value estimated from the spectroscopic data (M{sub 3} {approx} 0.64 M{sub Sun }). This reveals that the orbital inclination of the tertiary was about i' {approx} 90 Degree-Sign , indicating that the contact components of V401 Cyg have the possibility of being eclipsed by the tertiary at an orbital distance of about 3.0 AU, and it may be a triply eclipsing hierarchical triple system. The upward parabolic change indicates a period increase at a rate of (P-dot{sub 2} = 1.5 x 10{sup -7} revealing a mass transfer from the secondary to the primary (M-dot{sub 2} = 5.9 x 10{sup -8} M{sub Sun} yr{sup -1}). This is consistent with the predictions of the theory of thermal relaxation oscillation (TRO) suggesting that V401 Cyg is undergoing an expanding-orbit stage in the TRO cycles.

  18. Stabilization of posture by precision contact of the index finger

    NASA Technical Reports Server (NTRS)

    Holden, M.; Ventura, J.; Lackner, J. R.

    1994-01-01

    Postural sway during quiet stance increases if sight of the surroundings is denied. We studied how sensory-motor information about body displacement provided by contact of the index finger with a stationary bar can be used to stabilize balance in the absence of vision. Stabilization equivalent to the contribution conferred by vision was achieved at contact force levels less than 1 N. This value is much below that necessary to provide significant physical stabilization of the body. We interpret our findings in relation to tactile thresholds for motion detection, "precision grip," and proprioceptive and sensory-motor information about the configuration of the arm to the torso. In conditions allowing higher force levels at the fingertip (5-8 N), subjects assumed a passively stable state to stabilize their stance.

  19. Mass flow in close binary systems

    NASA Technical Reports Server (NTRS)

    Kondo, Y.; Mccluskey, G. E.

    1976-01-01

    The manner of mass flow in close binary systems is examined with a special view to the role of the so-called critical Roche (or Jacobian) lobe, taking into consideration relevant physical conditions such as radiation pressure that may affect the restricted three-body problem treatment. The mass does not necessarily flow from component one to component two through the L1 point to form a gaseous ring surrounding the latter. These considerations are applied to X-ray binaries with early-type optical components, such as Cyg X-1 (HDE 226868) and 3U 1700 - 37 (HD 153919). In the two bright close binary systems Beta Lyr and UW CMa, which are believed to be undergoing dynamic mass transfer, recent Copernicus observations show that the gas giving rise to the prominent ultraviolet emission lines surrounds the entire binary system rather than merely component two. Implications of these observations are also discussed.

  20. Allergic contact dermatitis to cosmetics.

    PubMed

    Park, Michelle E; Zippin, Jonathan H

    2014-01-01

    Allergic contact dermatitis caused by cosmetic products is an increasing concern given the continual creation and introduction of new cosmetics to the public. This article presents an overview of how to evaluate a patient for patch testing, including common areas for cosmetic-induced dermatitis, common cosmetic allergens, and proper management.

  1. Non-contact ECG monitoring

    NASA Astrophysics Data System (ADS)

    Smirnov, Alexey S.; Erlikh, Vadim V.; Kodkin, Vladimir L.; Keller, Andrei V.; Epishev, Vitaly V.

    2016-03-01

    The research is dedicated to non-contact methods of electrocardiography. The authors describe the routine of experimental procedure and suggest the approach to solving the problems which arise at indirect signal recording. The paper presents the results of experiments conducted by the authors, covers the flow charts of ECG recorders and reviews the drawbacks of filtering methods used in foreign equivalents.

  2. Barrier/Cu contact resistivity

    SciTech Connect

    Reid, J.S.; Nicolet, M.A.; Angyal, M.S.; Lilienfeld, D.; Shacham-Diamand, Y.; Smith, P.M.

    1995-10-17

    The specific contact resistivity of Cu with ({alpha} + {beta})-Ta, TiN, {alpha}-W, and amorphous-Ta{sub 36}Si{sub 14}N{sub 50} barrier films is measured using a novel four-point-probe approach. Geometrically, the test structures consist of colinear sets of W-plugs to act as current and voltage probes that contact the bottom of a planar Cu/barrier/Cu stack. Underlying Al interconnects link the plugs to the current source and voltmeter. The center-to-center distance of the probes ranges from 3 to 200 {micro}m. Using a relation developed by Vu et al., a contact resistivity of roughly 7 {times} 10{sup {minus}9} {Omega} cm{sup 2} is obtained for all tested barrier/Cu combinations. By reflective-mode small-angle X-ray scattering, the similarity in contact resistivity among the barrier films may be related to interfacial impurities absorbed from the deposition process.

  3. Ohmic contacts to semiconducting diamond

    NASA Astrophysics Data System (ADS)

    Zeidler, James R.; Taylor, M. J.; Zeisse, Carl R.; Hewett, C. A.; Delahoussaye, Paul R.

    1990-10-01

    Work was carried out to improve the electron beam evaporation system in order to achieve better deposited films. The basic system is an ion pumped vacuum chamber, with a three-hearth, single-gun e-beam evaporator. Four improvements were made to the system. The system was thoroughly cleaned and new ion pump elements, an e-gun beam adjust unit, and a more accurate crystal monitor were installed. The system now has a base pressure of 3 X 10(exp -9) Torr, and can easily deposit high-melting-temperature metals such as Ta with an accurately controlled thickness. Improved shadow masks were also fabricated for better alignment and control of corner contacts for electrical transport measurements. Appendices include: A Thermally Activated Solid State Reaction Process for Fabricating Ohmic Contacts to Semiconducting Diamond; Tantalum Ohmic Contacts to Diamond by a Solid State Reaction Process; Metallization of Semiconducting Diamond: Mo, Mo/Au, and Mo/Ni/Au; Specific Contact Resistance Measurements of Ohmic Contracts to Diamond; and Electrical Activation of Boron Implanted into Diamond.

  4. Contact symmetries and Hamiltonian thermodynamics

    SciTech Connect

    Bravetti, A.; Lopez-Monsalvo, C.S.; Nettel, F.

    2015-10-15

    It has been shown that contact geometry is the proper framework underlying classical thermodynamics and that thermodynamic fluctuations are captured by an additional metric structure related to Fisher’s Information Matrix. In this work we analyse several unaddressed aspects about the application of contact and metric geometry to thermodynamics. We consider here the Thermodynamic Phase Space and start by investigating the role of gauge transformations and Legendre symmetries for metric contact manifolds and their significance in thermodynamics. Then we present a novel mathematical characterization of first order phase transitions as equilibrium processes on the Thermodynamic Phase Space for which the Legendre symmetry is broken. Moreover, we use contact Hamiltonian dynamics to represent thermodynamic processes in a way that resembles the classical Hamiltonian formulation of conservative mechanics and we show that the relevant Hamiltonian coincides with the irreversible entropy production along thermodynamic processes. Therefore, we use such property to give a geometric definition of thermodynamically admissible fluctuations according to the Second Law of thermodynamics. Finally, we show that the length of a curve describing a thermodynamic process measures its entropy production.

  5. Electrical contact tool set station

    DOEpatents

    Byers, M.E.

    1988-02-22

    An apparatus is provided for the precise setting to zero of electrically conductive cutting tools used in the machining of work pieces. An electrically conductive cylindrical pin, tapered at one end to a small flat, rests in a vee-shaped channel in a base so that its longitudinal axis is parallel to the longitudinal axis of the machine's spindle. Electronic apparatus is connected between the cylindrical pin and the electrically conductive cutting tool to produce a detectable signal when contact between tool and pin is made. The axes of the machine are set to zero by contact between the cutting tool and the sides, end or top of the cylindrical pin. Upon contact, an electrical circuit is completed, and the detectable signal is produced. The tool can then be set to zero for that axis. Should the tool contact the cylindrical pin with too much force, the cylindrical pin would be harmlessly dislodged from the vee-shaped channel, preventing damage either to the cutting tool or the cylindrical pin. 5 figs.

  6. [Multifaceted body. I. The bodies of medicine].

    PubMed

    Saraga, M; Bourquin, C; Wykretowicz, H; Stiefel, F

    2015-02-11

    The human body is the object upon which medicine is acting, but also lived reality, image, symbol, representation and the object of elaboration and theory. All these elements which constitute the body influence the way medicine is treating it. In this series of three articles, we address the human body from various perspectives: medical (1), phenomenological (2), psychosomatic and socio-anthropological (3). This first article discusses four distinct types of representation of the body within medicine, each related to a specific epistemology and shaping a distinct kind of clinical legitimacy: the body-object of anatomy, the body-machine of physiology, the cybernetic body of biology, the statistical body of epidemiology.

  7. Longitudinal intergroup contact effects on prejudice using self- and observer-reports.

    PubMed

    Dhont, Kristof; Van Hiel, Alain; De Bolle, Marleen; Roets, Arne

    2012-06-01

    Longitudinal effects of intergroup contact on prejudice were investigated in a sample of 65 young adults (Sample 1) and a sample of their close friends (Sample 2, N= 172), adopting a full cross-lagged panel design. We first validated the self-report measure of intergroup contact from Sample 1 with observer ratings from Sample 2 by demonstrating that self-reports and observer ratings of contact were highly correlated. Moreover, we obtained significant cross-lagged effects of intergroup contact on prejudice with both contact measures, thereby providing a second validation for the use of self-reports of intergroup contact. Finally, by the use of latent change modelling, we demonstrated that, although no overall significant change in contact and prejudice over time was found, there was meaningful variation in absolute change in the individual levels of intergroup contact and prejudice. In particular, some individuals showed increases while others showed decreases in contact or prejudice across time. Moreover, higher levels of intergroup contact at Time 1 were followed by larger subsequent decreases in prejudice between Time 1 and Time 2, and changes in contact were significantly and negatively related to changes in prejudice. Methodological implications of the findings are discussed.

  8. Subjective perception of body sway

    PubMed Central

    Schieppati, M.; Tacchini, E.; Nardone, A.; Tarantola, J.; Corna, S.

    1999-01-01

    OBJECTIVES AND METHOD—The relation between body sway recorded through a stabilometric platform and the subjective report of steadiness was studied in 20 young and 20 elderly subjects and 20 neuropathic and 20parkinsonian patients standing upright. The trials were performed under two stances (feet apart, feet together) and two visual conditions (eyes open, eyes closed). At the end of each trial, subjects scored their performance on a scale from 10 (complete steadiness) to 0(fall).
RESULTS—In all subjects, independently of the stance conditions, the larger the body sway the smaller the reported score. The function best fitting this relation was linear when sway was expressed on a logarithmic scale. The scoring reproducibility proved high both within and across subjects. Despite the different body sways and scores recorded under the different visual and postural conditions (eyes closed >eyes open, feet together>feet apart) in all groups of subjects and patients, the slopes of the relations between sway and score were broadly superimposable. In the normal subjects, the scores were slightly higher during eyes open than eyes closed trials for corresponding body sways. This was interpreted as a sign of perception of greater stability when vision was allowed. Parkinsonian patients swayed to a similar extent as normal subjects, and their scores were accordingly similar, both with eyes open and eyes closed. Neuropathic patients swayed to a larger extent than normal subjects, and their scores were matched appropriately. Although the slope of their relation with eyes closed was not different from that of normal subjects, with eyes open it was steeper and similar to that with eyes closed, suggesting that these patients did not feel more stable when they could take advantage of vision.
CONCLUSIONS—The subjective evaluation of body sway, irrespective of stance condition, age, neuropathy, and basal ganglia disease, reflects the actual sway, and is inversely proportional

  9. Computing Contact Stresses In Gear Teeth

    NASA Technical Reports Server (NTRS)

    Oswald, Fred B.; Somprakit, Paisan; Huston, Ronald L.

    1995-01-01

    Improved method of computing contact stresses in gear teeth accounts for complicating effects like those of static and sliding friction. Provides iterative procedure for determination of contact region and nodal contact forces along with contact stresses. Method based on equations and computational procedure incorporating these effects routinely.

  10. Closed-Loop Control of Humidification for Artifact Reduction in Capacitive ECG Measurements.

    PubMed

    Leicht, Lennart; Eilebrecht, Benjamin; Weyer, Soren; Leonhardt, Steffen; Teichmann, Daniel

    2017-01-25

    Recording biosignals without the need for direct skin contact offers new opportunities for ubiquitous health monitoring. Electrodes with capacitive coupling have been shown to be suitable for the monitoring of electrical potentials on the body surface, in particular ECG. However, due to triboelectric charge generation and motion artifacts, signal and thus diagnostic quality is inferior to galvanic coupling. Active closed-loop humidification of capacitive electrodes is proposed in this work as a new concept to improve signal quality. A capacitive ECG recording system integrated into a common car seat is presented. It can regulate the micro climate at the interface of electrode and patient by actively dispensing water vapour and monitoring humidity in a closed-loop approach. As a regenerative water reservoir, silica gel is used. The system was evaluated with respect to subjective and objective ECG signal quality. Active humidification was found to have a significant positive effect in case of previously poor quality. Also, it had no diminishing effect in case of already good signal quality.

  11. Apparatus for acoustically coupling an ultrasonic transducer with a body

    NASA Technical Reports Server (NTRS)

    Marshall, Scot H. (Inventor)

    1993-01-01

    An apparatus for acoustically coupling an ultrasonic transducer with a body along whose surface waves are to be transmitted includes a wedge having a first surface for acoustically contacting a subject surface area of a body to be measured, on which surface waves are to be transmitted, and a second surface for accoustically contacting an ultrasonic transducer. The wedge includes a cylinder in which the second surface is present and which is movably disposed in a recess in a block in which the first surface is present, for orienting the first surface and the second surface relative to each other so that ultrasonic waves emitted by the ultrasonic transducer generate surface waves which travel on the subject surface area of the body when the ultrasonic transducer is in acoustic contact with the second surface and the first surface is in acoustic contact with the subject surface area of the body. In the preferred embodiment, there is a third surface which is orientable relative to the first surface so that ultrasonic waves emitted by an ultrasonic transducer in contact with the third surface generate surface waves which travel on the subject surface area of the body when the first surface is an acoustic contact with the subject surface area of the body.

  12. Beyond contact: intergroup contact in the context of power relations.

    PubMed

    Saguy, Tamar; Dovidio, John F; Pratto, Felicia

    2008-03-01

    This work investigated how group-based power affects the motivations and preferences that members of advantaged and disadvantaged groups bring to situations of contact. To measure the preferred content of interactions, desires to address particular topics in intergroup contact were assessed for both experimental groups (Study 1) and real groups (Study 2). As predicted, across both studies, the desire to talk about power was greater among members of disadvantaged than of advantaged groups. This difference was mediated by motivation for change in group-based power. Study 2 further demonstrated that more highly identified members of disadvantaged groups wanted to talk about power more. Members of advantaged groups generally preferred to talk about commonalities between the groups more than about group-based power, and this desire was greater with higher levels of identification. However, perceiving that their group's advantage was illegitimate increased the desire of advantaged group members to address power in intergroup interactions.

  13. Improved Electrical Contact For Dowhhole Drilling Networks

    DOEpatents

    Hall, David R.; Hall, Jr., H. Tracy; Pixton, David S.; Dahlgren, Scott; Fox, Joe; Sneddon, Cameron

    2005-08-16

    An electrical contact system for transmitting information across tool joints while minimizing signal reflections that occur at the tool joints includes a first electrical contact comprising an annular resilient material. An annular conductor is embedded within the annular resilient material and has a surface exposed from the annular resilient material. A second electrical contact is provided that is substantially equal to the first electrical contact. Likewise, the second electrical contact has an annular resilient material and an annular conductor. The two electrical contacts configured to contact one another such that the annular conductors of each come into physical contact. The annular resilient materials of each electrical contact each have dielectric characteristics and dimensions that are adjusted to provide desired impedance to the electrical contacts.

  14. Contact angle measurements at the colemanite and realgar surfaces

    NASA Astrophysics Data System (ADS)

    Koca, Sabiha; Savas, Mehmet

    2004-03-01

    Colemanite is one of the most important boron minerals and covers an important part of Turkey's boron mineral deposits. The friable nature of the colemanite tends to produce a large amount of fines. Flotation appears to be a promising technique to recover colemanite from such fines. During flotation process, selectivity problem arises between colemanite and associated gangue minerals such as realgar. There is a close relationship between floatability of minerals and contact angle. Therefore, surface hydrophobicity of colemanite and realgar minerals were investigated by receding contact angle measurements in the absence and presence of flotation reagents. The water contact angle values at the colemanite surface remained almost unchanged at 32-35° in the solutions of potassium amyl xanthate (KAX), potassium ethyl xanthate (KEX) and petroleum sulphanate (R825) while another petroleum sulphanate (R840), sodium oleate and tallow amine (Armac-T) affected hydrophobicity of colemanite, and the contact angle values increased up to 47°. The contact angle values of 62, 63, 45, 46, 39, and 43° at the realgar surface were obtained in the solutions of KAX, KEX, sodium oleate, R825, R840 and Armac-T, respectively.

  15. Chain Of Test Contacts For Integrated Circuits

    NASA Technical Reports Server (NTRS)

    Lieneweg, Udo

    1989-01-01

    Test structure forms chain of "cross" contacts fabricated together with large-scale integrated circuits. If necessary, number of such chains incorporated at suitable locations in integrated-circuit wafer for determination of fabrication yield of contacts. In new structure, resistances of individual contacts determined: In addition to making it possible to identify local defects, enables generation of statistical distributions of contact resistances for prediction of "parametric" contact yield of fabrication process.

  16. On the renormalization of contact interactions for the configuration-interaction method in two-dimensions

    NASA Astrophysics Data System (ADS)

    Rontani, Massimo; Eriksson, G.; Åberg, S.; Reimann, S. M.

    2017-03-01

    The configuration interaction (CI) method for calculating the exact eigenstates of a quantum-mechanical few-body system is problematic when applied to particles interacting through contact forces. In dimensions higher than one the approach fails due to the pathology of the Dirac δ-potential, making it impossible to reach convergence by gradually increasing the size of the Hilbert space. However, this problem may be cured in a rather simple manner by renormalizing the strength of the contact potential when diagonalizing in a truncated Hilbert space. One hereby relies on the comparison of the CI results to the two-body ground-state energy obtained by the exact solution of the Schrödinger equation for a regularized contact interaction. We discuss here a scheme that provides cutoff-independent few-body physical observables. The method is applied to a few-body system of ultracold atoms confined by a two-dimensional harmonic oscillator.

  17. Equilibrium contact angles of liquid droplets on ideal rough solids.

    PubMed

    Kang, Hie Chan; Jacobi, Anthony M

    2011-12-20

    This work proposes a theoretical model for predicting the apparent equilibrium contact angle of a liquid on an ideal rough surface that is homogeneous and has a negligible body force, line tension, or contact angle hysteresis between solid and liquid. The model is derived from the conservation equations and the free-energy minimization theory for the changes of state of liquid droplets. The work of adhesion is expressed as the contact angles in the wetting process of the liquid droplets. Equilibrium contact angles of liquid droplets for rough surfaces are expressed as functions of the area ratios for the solid, liquid, and surrounding gas and the roughness ratio and wetting ratio of the liquid on the solid for the partially and fully wet states. It is found that the ideal critical angle for accentuating the contact angles by the surface roughness is 48°. The present model is compared with existing experimental data and the classical Wenzel and Cassie-Baxter models and agrees with most of the experimental data for various surfaces and liquids better than does the Wenzel model and accounts for trends that the Wenzel model cannot explain.

  18. Hot or not? Thermal reactions to social contact.

    PubMed

    Hahn, Amanda C; Whitehead, Ross D; Albrecht, Marion; Lefevre, Carmen E; Perrett, David I

    2012-10-23

    Previous studies using thermal imaging have suggested that face and body temperature increase during periods of sexual arousal. Additionally, facial skin temperature changes are associated with other forms of emotional arousal, including fear and stress. This study investigated whether interpersonal social contact can elicit facial temperature changes. Study 1: infrared images were taken during a standardized interaction with a same- and opposite-sex experimenter using skin contact in a number of potentially high-intimate (face and chest) and low-intimate (arm and palm) locations. Facial skin temperatures significantly increased from baseline during the face and chest contact, and these temperature shifts were larger when contact was made by an opposite-sex experimenter. Study 2: the topography of facial temperature change was investigated in five regions: forehead, periorbital, nose, mouth and cheeks. Increased temperature in the periorbital, nose and mouth regions predicted overall facial temperature shifts to social contact. Our findings demonstrate skin temperature changes are a sensitive index of arousal during interpersonal interactions.

  19. Fifty-odd years of inter-group contact: from hypothesis to integrated theory.

    PubMed

    Hewstone, Miles; Swart, Hermann

    2011-09-01

    We review 50-odd years of research on Allport's (1954)'contact hypothesis', to assess progress, problems, and prospects. We chart the progress that has been made in understanding two distinct forms of contact: direct and indirect. We highlight the progress made in understanding the effects of each type of contact, as well as both moderating and mediating factors, and emphasize the multiple impacts of direct contact, especially. We then consider some of the main critiques of inter-group contact, focusing on empirical issues and whether contact impedes social change, and provide a research agenda for the coming years. We conclude that this body of work no longer merits the modest title of 'hypothesis', but fully deserves acknowledgement as an integrated and influential theory.

  20. Body Image and Body Contouring Procedures.

    PubMed

    Sarwer, David B; Polonsky, Heather M

    2016-10-01

    Dissatisfaction with physical appearance and body image is a common psychological phenomena in Western society. Body image dissatisfaction is frequently reported by those who have excess body weight, but also is seen in those of normal body weight. For both groups of individuals, this dissatisfaction impacts self-esteem and quality of life. Furthermore, it is believed to be the motivational catalyst to a range of appearance-enhancing behaviors, including weight loss efforts and physical activity. Body image dissatisfaction is also believed to play a role in the decision to seek the wide range of body contouring procedures offered by aesthetic physicians. Individuals who seek these procedures typically report increased body image dissatisfaction, focus on the feature they wish to alter with treatment, and often experience improvement in body image following treatment. At the same time, extreme body image dissatisfaction is a symptom of a number of recognized psychiatric disorders. These include anorexia nervosa, bulimia nervosa, and body dysmorphic disorder (BDD), all of which can contraindicate aesthetic treatment. This special topic review paper provides an overview of the relationship between body image dissatisfaction and aesthetic procedures designed to improve body contouring. The review specifically focuses on the relationship of body image and body weight, as well as the presentation of body image psychopathology that would contraindicate aesthetic surgery. The overall goal of the paper is to highlight the clinical implications of the existing research and provide suggestions for future research on the psychological aspects of body contouring procedures.

  1. PREFACE: Non-contact AFM Non-contact AFM

    NASA Astrophysics Data System (ADS)

    Giessibl, Franz J.; Morita, Seizo

    2012-02-01

    This special issue is focussed on high resolution non-contact atomic force microscopy (AFM). Non-contact atomic force microscopy was established approximately 15 years ago as a tool to image conducting and insulating surfaces with atomic resolution. Since 1998, an annual international conference has taken place, and although the proceedings of these conferences are a useful source of information, several key developments warrant devoting a special issue to this subject. In the theoretic field, the possibility of supplementing established techniques such as scanning tunneling microscopy (STM) and Kelvin probe microscopy with atomically resolved force micrsoscopy poses many challenges in the calculation of contrast and contrast reversal. The surface science of insulators, self-assembled monolayers and adsorbates on insulators is a fruitful field for the application of non-contact AFM: several articles in this issue are devoted to these subjects. Atomic imaging and manipulation have been pioneered using STM, but because AFM allows the measurement of forces, AFM has had a profound impact in this field as well. Three-dimensional force spectroscopy has allowed many important insights into surface science. In this issue a combined 3D tunneling and force microscopy is introduced. Non-contact AFM typically uses frequency modulation to measure force gradients and was initially used mainly in a vacuum. As can be seen in this issue, frequency modulation is now also used in ambient conditions, allowing better spatial and force resolution. We thank all of the contributors for their time and efforts in making this special issue possible. We are also very grateful to the staff of IOP Publishing for handling the administrative aspects and for steering the refereeing process. Non-contact AFM contents Relation between the chemical force and the tunnelling current in atomic point contacts: a simple model Pavel Jelínek, Martin Ondrácek and Fernando Flores Theoretical simulation of

  2. 78 FR 24765 - Notice of Intent To Close 16 Field Offices

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-26

    ... URBAN DEVELOPMENT Notice of Intent To Close 16 Field Offices AGENCY: Office of Field Policy and Management, HUD. ACTION: Notice. SUMMARY: This notice advises the public that HUD intends to close the.... 3535. FOR FURTHER INFORMATION CONTACT: Honor Garcia-Tomchick, Department of Housing and...

  3. From First Contact to Close Encounters: A Developmentally Deep Perceptual System for a Humanoid Robot

    DTIC Science & Technology

    2003-06-01

    Clustering by color histogram: A classic Swain and Ballard (1991) style implementation was used, giving a recognition accuracy of 98.6% on a set of 420...borrow one of these schemes for robots. One of the goals of the Kismet robot in our group was to evoke the "motherese" style of speech, for...control style grammar. Sentences that began with phrases such as "say", "can you say", "try" etc. were treated as requests for the robot to repeat the

  4. Sensing with Superconducting Point Contacts

    PubMed Central

    Nurbawono, Argo; Zhang, Chun

    2012-01-01

    Superconducting point contacts have been used for measuring magnetic polarizations, identifying magnetic impurities, electronic structures, and even the vibrational modes of small molecules. Due to intrinsically small energy scale in the subgap structures of the supercurrent determined by the size of the superconducting energy gap, superconductors provide ultrahigh sensitivities for high resolution spectroscopies. The so-called Andreev reflection process between normal metal and superconductor carries complex and rich information which can be utilized as powerful sensor when fully exploited. In this review, we would discuss recent experimental and theoretical developments in the supercurrent transport through superconducting point contacts and their relevance to sensing applications, and we would highlight their current issues and potentials. A true utilization of the method based on Andreev reflection analysis opens up possibilities for a new class of ultrasensitive sensors. PMID:22778630

  5. Remedial Action Contacts Directory - 1997

    SciTech Connect

    1997-05-01

    This document, which was prepared for the US Department of Energy (DOE) Office of Environmental Restoration (ER), is a directory of 2628 individuals interested or involved in environmental restoration and/or remedial actions at radioactively contaminated sites. This directory contains a list of mailing addresses and phone numbers of DOE operations, area, site, project, and contractor offices; an index of DOE operations, area, site, project, and contractor office sorted by state; a list of individuals, presented by last name, facsimile number, and e-mail address; an index of affiliations presented alphabetically, with individual contacts appearing below each affiliation name; and an index of foreign contacta sorted by country and affiliation. This document was generated from the Remedial Action Contacts Database, which is maintained by the Remedial Action Program Information Center (RAPIC).

  6. Sensing with superconducting point contacts.

    PubMed

    Nurbawono, Argo; Zhang, Chun

    2012-01-01

    Superconducting point contacts have been used for measuring magnetic polarizations, identifying magnetic impurities, electronic structures, and even the vibrational modes of small molecules. Due to intrinsically small energy scale in the subgap structures of the supercurrent determined by the size of the superconducting energy gap, superconductors provide ultrahigh sensitivities for high resolution spectroscopies. The so-called Andreev reflection process between normal metal and superconductor carries complex and rich information which can be utilized as powerful sensor when fully exploited. In this review, we would discuss recent experimental and theoretical developments in the supercurrent transport through superconducting point contacts and their relevance to sensing applications, and we would highlight their current issues and potentials. A true utilization of the method based on Andreev reflection analysis opens up possibilities for a new class of ultrasensitive sensors.

  7. Contact charge-transfer lasers

    SciTech Connect

    Dharamsi, A.N.; Tulip, J.

    1981-07-01

    A mechanism for sustaining population inversions in contact charge-transfer complexes in which the ground electronic state is not bound is described. The mechanism relies on picosecond radiationless depletion of the lower laser state. This generates an inversion even when the ground-state potential curve, as plotted against the donor-acceptor distance, is not repulsive vertically below the excited state minimum. Contact charge-transfer lasers would offer high gain, high-energy density, and tunable sources of coherent radiation in the uv and visible. A method for pumping such a laser is examined and applied to the pyrrole-oxygen complex. A rate equation analysis is done and estimates for gain and energy density are presented.

  8. Contact microscopy with synchrotron radiation

    SciTech Connect

    Panessa-Warren, B.J.

    1985-10-01

    Soft x-ray contact microscopy with synchrotron radiation offers the biologist and especially the microscopist, a way to morphologically study specimens that could not be imaged by conventional TEM, STEM or SEM methods (i.e. hydrated samples, samples easily damaged by an electron beam, electron dense samples, thick specimens, unstained low contrast specimens) at spatial resolutions approaching those of the TEM, with the additional possibility to obtain compositional (elemental) information about the sample as well. Although flash x-ray sources offer faster exposure times, synchrotron radiation provides a highly collimated, intense radiation that can be tuned to select specific discrete ranges of x-ray wavelengths or specific individual wavelengths which optimize imaging or microanalysis of a specific sample. This paper presents an overview of the applications of x-ray contact microscopy to biological research and some current research results using monochromatic synchrotron radiation to image biological samples. 24 refs., 10 figs.

  9. Contact lenses for infant aphakia.

    PubMed Central

    Amaya, L G; Speedwell, L; Taylor, D

    1990-01-01

    We prospectively studied for three years the optical correction by contact lenses of 83 aphakic infants (141 eyes) who generally also had systemic and other ocular anomalies: 85% of the patients tolerated the lens wear for the whole study period. Complications occurred in 46 eyes and led to cessation of lens wear in two cases. Ten patients abandoned the lenses for other reasons. Thirty-four eyes needed subsequent intraocular surgery, mostly minor, and nine patients had strabismus surgery. Contact lenses are a versatile, safe, successful, and cost effective treatment for aphakia in infancy against which, before their widespread introduction for primary optical correction of infant aphakia, other methods of aphakic treatment need to be compared. PMID:2322512

  10. Contact dermatitis caused by preservatives.

    PubMed

    Yim, Elizabeth; Baquerizo Nole, Katherine L; Tosti, Antonella

    2014-01-01

    Preservatives are biocidal chemicals added to food, cosmetics, and industrial products to prevent the growth of microorganisms. They are usually nontoxic and inexpensive and have a long shelf life. Unfortunately, they commonly cause contact dermatitis. This article reviews the most important classes of preservatives physicians are most likely to encounter in their daily practice, specifically isothiazolinones, formaldehyde and formaldehyde-releasers, iodopropynyl butylcarbamate, methyldibromoglutaronitrile, and parabens. For each preservative mentioned, the prevalence of sensitization, clinical presentation of contact dermatitis, patch testing concentrations, cross reactions, and related legislation will be discussed. Mandatory labeling of preservatives is required in some countries, but not required in others. Until policies are made, physicians and patients must be proactive in identifying potential sensitizers and removing their use. We hope that this article will serve as a guide for policy makers in creating legislation and future regulations on the use and concentration of certain preservatives in cosmetics and industrial products.

  11. Heat transport through atomic contacts.

    PubMed

    Mosso, Nico; Drechsler, Ute; Menges, Fabian; Nirmalraj, Peter; Karg, Siegfried; Riel, Heike; Gotsmann, Bernd

    2017-02-06

    Heat transport and dissipation at the nanoscale severely limit the scaling of high-performance electronic devices and circuits. Metallic atomic junctions serve as model systems to probe electrical and thermal transport down to the atomic level as well as quantum effects that occur in one-dimensional (1D) systems. Whereas charge transport in atomic junctions has been studied intensively in the past two decades, heat transport remains poorly characterized because it requires the combination of a high sensitivity to small heat fluxes and the formation of stable atomic contacts. Here we report heat-transfer measurements through atomic junctions and analyse the thermal conductance of single-atom gold contacts at room temperature. Simultaneous measurements of charge and heat transport reveal the proportionality of electrical and thermal conductance, quantized with the respective conductance quanta. This constitutes a verification of the Wiedemann-Franz law at the atomic scale.

  12. Protein contact dermatitis - Case report*

    PubMed Central

    Barata, Ana Rita Rodrigues; Conde-Salazar, Luis

    2013-01-01

    Protein contact dermatitis is a skin condition not well known and underdiagnosed by dermatologists, resulting from an IgE-mediated allergic reaction. Clinically it presents as a chronic hand and/or forearms eczema of occupational origin, especially in professionals who work as food handlers. Epicutaneous tests are negative, and to diagnose this condition it is necessary to perform immediate-type allergy tests. The most sensitive and practical is the prick-by-prick test with food that the patient refers to cause intense itching after immediate skin contact. Treatment is symptomatic, and it is mandatory to avoid the responsible allergen, wearing plastic gloves and even sometimes leaving the workplace for symptom resolution. PMID:24068135

  13. Elbow Dislocations in Contact Sports.

    PubMed

    Morris, Mark S; Ozer, Kagan

    2017-02-01

    Elbow dislocations are more common in athletes than in the general population. Simple elbow dislocations should be managed with early range of motion and early return to sport, even with high-level contact athletes. Patients with instability on examination or with complex elbow dislocations may require surgical intervention. Overall, the outcomes after simple elbow dislocations are excellent and athletes should be able to return to play without significant limitations.

  14. Forces between membranes approaching contact.

    PubMed

    Parsegian, V A

    1981-01-01

    Cell stickiness to surfaces is recognized as an important concern in tests of red cell filterability. Many forces need to be considered in order to think about the sources of cell sticking. As cell membranes are brought together they experience successively the domination of several classes of forces van der Waals attraction, electrostatic repulsion, hydration repulsion, and specific charge-charge interactions at contact. The behaviour of each of these forces is described in the context of red cell adhesion.

  15. Allergic contact dermatitis to Alstroemeria.

    PubMed

    Marks, J G

    1988-06-01

    Two female florists developed dermatitis of the fingertips. Patch testing revealed allergic contact dermatitis to the flower, Alstroemeria, used in floral arrangements. They had positive patch tests to portions of Alstroemeria, and to tuliposide A, the allergen in this plant. Vinyl gloves were not helpful since tuliposide A readily penetrates through these gloves. Nitrile gloves may be protective since they prevented positive patch test to tuliposide A.

  16. Contact | Office of Cancer Genomics

    Cancer.gov

    For more information about the Office of Cancer Genomics, please contact: Office of Cancer Genomics National Cancer Institute 31 Center Drive, 10A07 Bethesda, Maryland 20892-2580 Phone: (301) 451-8027 Fax: (301) 480-4368 Email: ocg@mail.nih.gov *Please note that this site will not function properly in Internet Explorer unless you completely turn off the Compatibility View*

  17. Contact allergy to cocamidopropyl betaine.

    PubMed

    de Groot, A C; van der Walle, H B; Weyland, J W

    1995-12-01

    Cocamidopropyl betaine is an amphoteric surfactant used increasingly in cosmetic products. We describe 20 cases of cosmetic allergy to cocamidopropyl betaine; all were caused by shampoo or shower gel. 8 patients were hairdressers, who had occupational allergic contact dermatitis from shampoos. We recommend patch testing cocamidopropyl betaine 1% aq. routinely in hairdressers with dermatitis of the hands, and in all patients suspected of suffering from cosmetic allergy.

  18. Close-packed array of light emitting devices

    DOEpatents

    Ivanov, Ilia N.; Simpson, John T.

    2013-04-09

    A close-packed array of light emitting diodes includes a nonconductive substrate having a plurality of elongate channels extending therethrough from a first side to a second side, where each of the elongate channels in at least a portion of the substrate includes a conductive rod therein. The conductive rods have a density over the substrate of at least about 1,000 rods per square centimeter and include first conductive rods and second conductive rods. The close-packed array further includes a plurality of light emitting diodes on the first side of the substrate, where each light emitting diode is in physical contact with at least one first conductive rod and in electrical contact with at least one second conductive rod.

  19. Immunotherapy of allergic contact dermatitis.

    PubMed

    Spiewak, Radoslaw

    2011-08-01

    The term 'immunotherapy' refers to treating diseases by inducing, enhancing or suppressing immune responses. As allergy is an excessive, detrimental immune reaction to otherwise harmless environmental substances, immunotherapy of allergic disease is aimed at the induction of tolerance toward sensitizing antigens. This article focuses on the historical developments, present state and future outlook for immunotherapy with haptens as a therapeutic modality for allergic contact dermatitis. Inspired by the effectiveness of immunotherapy in respiratory allergies, attempts were undertaken at curing allergic contact dermatitis by means of controlled administration of the sensitizing haptens. Animal and human experiments confirmed that tolerance to haptens can be induced most effectively when the induction of tolerance precedes attempted sensitization. In real life, however, therapy is sought by people who are already sensitized and an effective reversal of hypersensitivity seems more difficult to achieve. Decades of research on Rhus hypersensitivity led to a conclusion that immunotherapy can suppress Rhus dermatitis, however, only to a limited degree, for a short period of time, and at a high risk of side effects, which makes this method therapeutically unprofitable. Methodological problems with most available studies of immunotherapy of contact allergy to nickel make any definite conclusions impossible at this stage.

  20. Nickel contact hypersensitivity in children.

    PubMed

    Silverberg, Nanette B; Licht, Jonah; Friedler, Suzanne; Sethi, Shika; Laude, Teresita A

    2002-01-01

    Nickel allergic contact dermatitis is the most prevalent allergy in North America, with an incidence of 14.3%. It is on the rise from 10 years ago, when the incidence was 10%. This has been presumed to represent an increased exposure to nickel in the environment-especially in costume jewelry and belt buckles. We examined a group of 30 pediatric patients who had either a personal history of umbilical or wrist dermatitis, or a family history of nickel allergic contact dermatitis. All of these patients had a positive patch test to nickel sulfate 5%. Moreover, 50% of patients had an id reaction; all of these patients had positive patch tests that were papular in nature, similar to their papular id reaction. We posit that the presence of a positive family history may be a positive predictor of nickel allergic contact dermatitis, requiring nickel avoidance, especially in atopic children. Based on the high level of positive reactions in patients with umbilical dermatitis and an id reaction, patch testing to nickel in these patients is most likely to yield a useful result. Knowledge of reactivity to nickel would then allow parents and patients to initiate nickel avoidance earlier in life.