Viscous wing theory development. Volume 1: Analysis, method and results

NASA Technical Reports Server (NTRS)

Chow, R. R.; Melnik, R. E.; Marconi, F.; Steinhoff, J.

1986-01-01

Viscous transonic flows at large Reynolds numbers over 3-D wings were analyzed using a zonal viscid-inviscid interaction approach. A new numerical AFZ scheme was developed in conjunction with the finite volume formulation for the solution of the inviscid full-potential equation. A special far-field asymptotic boundary condition was developed and a second-order artificial viscosity included for an improved inviscid solution methodology. The integral method was used for the laminar/turbulent boundary layer and 3-D viscous wake calculation. The interaction calculation included the coupling conditions of the source flux due to the wing surface boundary layer, the flux jump due to the viscous wake, and the wake curvature effect. A method was also devised incorporating the 2-D trailing edge strong interaction solution for the normal pressure correction near the trailing edge region. A fully automated computer program was developed to perform the proposed method with one scalar version to be used on an IBM-3081 and two vectorized versions on Cray-1 and Cyber-205 computers.

Physical realization of topological quantum walks on IBM-Q and beyond

NASA Astrophysics Data System (ADS)

Balu, Radhakrishnan; Castillo, Daniel; Siopsis, George

2018-07-01

We discuss an efficient physical realization of topological quantum walks on a one-dimensional finite lattice with periodic boundary conditions (circle). The N-point lattice is realized with {log}}2N qubits, and the quantum circuit utilizes a number of quantum gates that are polynomial in the number of qubits. In a certain scaling limit, we show that a large number of steps are implemented with a number of quantum gates which are independent of the number of steps. We ran the quantum algorithm on the IBM-Q five-qubit quantum computer, thus experimentally demonstrating topological features, such as boundary bound states, on a one-dimensional lattice with N = 4 points.

Performance of flapping airfoil propulsion with LBM method and DMD analysis

NASA Astrophysics Data System (ADS)

Li, Bing-Hua; Huang, Xian-Wen; Zheng, Yao; Xie, Fang-Fang; Wang, Jing; Zou, Jian-Feng

2018-05-01

In this work, the performance of flapping airfoil propulsion at low Reynolds number of Re = 100-400 is studied numerically with the lattice Boltzmann method (LBM). Combined with immersed boundary method (IBM), the LBM has been widely used to simulate moving boundary problems. The influences of the reduced frequency on the plunging and pitching airfoil are explored. It is found that the leading-edge vertex separation and inverted wake structures are two main coherent structures, which dominate the flapping airfoil propulsion. However, the two structures play different roles in the flow and the combination effects on the propulsion need to be clarified. To do so, we adopt the dynamic mode decomposition (DMD) algorithm to reveal the underlying physics. The DMD has been proven to be very suitable for analyzing the complex transient systems like the vortex structure of flapping flight.

A second-order accurate immersed boundary-lattice Boltzmann method for particle-laden flows

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Qiang; Fan, Liang-Shih, E-mail: fan.1@osu.edu

A new immersed boundary-lattice Boltzmann method (IB-LBM) is presented for fully resolved simulations of incompressible viscous flows laden with rigid particles. The immersed boundary method (IBM) recently developed by Breugem (2012) [19] is adopted in the present method, development including the retraction technique, the multi-direct forcing method and the direct account of the inertia of the fluid contained within the particles. The present IB-LBM is, however, formulated with further improvement with the implementation of the high-order Runge–Kutta schemes in the coupled fluid–particle interaction. The major challenge to implement high-order Runge–Kutta schemes in the LBM is that the flow information suchmore » as density and velocity cannot be directly obtained at a fractional time step from the LBM since the LBM only provides the flow information at an integer time step. This challenge can be, however, overcome as given in the present IB-LBM by extrapolating the flow field around particles from the known flow field at the previous integer time step. The newly calculated fluid–particle interactions from the previous fractional time steps of the current integer time step are also accounted for in the extrapolation. The IB-LBM with high-order Runge–Kutta schemes developed in this study is validated by several benchmark applications. It is demonstrated, for the first time, that the IB-LBM has the capacity to resolve the translational and rotational motion of particles with the second-order accuracy. The optimal retraction distances for spheres and tubes that help the method achieve the second-order accuracy are found to be around 0.30 and −0.47 times of the lattice spacing, respectively. Simulations of the Stokes flow through a simple cubic lattice of rotational spheres indicate that the lift force produced by the Magnus effect can be very significant in view of the magnitude of the drag force when the practical rotating speed of the spheres is encountered. This finding may lead to more comprehensive studies of the effect of the particle rotation on fluid–solid drag laws. It is also demonstrated that, when the third-order or the fourth-order Runge–Kutta scheme is used, the numerical stability of the present IB-LBM is better than that of all methods in the literature, including the previous IB-LBMs and also the methods with the combination of the IBM and the traditional incompressible Navier–Stokes solver. - Highlights: • The IBM is embedded in the LBM using Runge–Kutta time schemes. • The effectiveness of the present IB-LBM is validated by benchmark applications. • For the first time, the IB-LBM achieves the second-order accuracy. • The numerical stability of the present IB-LBM is better than previous methods.« less

An immersed boundary method for modeling a dirty geometry data

NASA Astrophysics Data System (ADS)

Onishi, Keiji; Tsubokura, Makoto

2017-11-01

We present a robust, fast, and low preparation cost immersed boundary method (IBM) for simulating an incompressible high Re flow around highly complex geometries. The method is achieved by the dispersion of the momentum by the axial linear projection and the approximate domain assumption satisfying the mass conservation around the wall including cells. This methodology has been verified against an analytical theory and wind tunnel experiment data. Next, we simulate the problem of flow around a rotating object and demonstrate the ability of this methodology to the moving geometry problem. This methodology provides the possibility as a method for obtaining a quick solution at a next large scale supercomputer. This research was supported by MEXT as ``Priority Issue on Post-K computer'' (Development of innovative design and production processes) and used computational resources of the K computer provided by the RIKEN Advanced Institute for Computational Science.

Validation of the 1/12 degrees Arctic Cap Nowcast/Forecast System (ACNFS)

DTIC Science & Technology

2010-11-04

IBM Power 6 ( Davinci ) at NAVOCEANO with a 2 hr time step for the ice model and a 30 min time step for the ocean model. All model boundaries are...run using 320 processors on the Navy DSRC IBM Power 6 ( Davinci ) at NAVOCEANO. A typical one-day hindcast takes approximately 1.0 wall clock hour...meter. As more observations become available, further studies of ice draft will be used as a validation tool . The IABP program archived 102 Argos

Validation of the 1/12 deg Arctic Cap Nowcast/Forecast System (ACNFS)

DTIC Science & Technology

2010-11-04

IBM Power 6 ( Davinci ) at NAVOCEANO with a 2 hr time step for the ice model and a 30 min time step for the ocean model. All model boundaries are...run using 320 processors on the Navy DSRC IBM Power 6 ( Davinci ) at NAVOCEANO. A typical one-day hindcast takes approximately 1.0 wall clock hour...meter. As more observations become available, further studies of ice draft will be used as a validation tool . The IABP program archived 102 Argos

An immersed boundary method for direct and large eddy simulation of stratified flows in complex geometry

NASA Astrophysics Data System (ADS)

Rapaka, Narsimha R.; Sarkar, Sutanu

2016-10-01

A sharp-interface Immersed Boundary Method (IBM) is developed to simulate density-stratified turbulent flows in complex geometry using a Cartesian grid. The basic numerical scheme corresponds to a central second-order finite difference method, third-order Runge-Kutta integration in time for the advective terms and an alternating direction implicit (ADI) scheme for the viscous and diffusive terms. The solver developed here allows for both direct numerical simulation (DNS) and large eddy simulation (LES) approaches. Methods to enhance the mass conservation and numerical stability of the solver to simulate high Reynolds number flows are discussed. Convergence with second-order accuracy is demonstrated in flow past a cylinder. The solver is validated against past laboratory and numerical results in flow past a sphere, and in channel flow with and without stratification. Since topographically generated internal waves are believed to result in a substantial fraction of turbulent mixing in the ocean, we are motivated to examine oscillating tidal flow over a triangular obstacle to assess the ability of this computational model to represent nonlinear internal waves and turbulence. Results in laboratory-scale (order of few meters) simulations show that the wave energy flux, mean flow properties and turbulent kinetic energy agree well with our previous results obtained using a body-fitted grid (BFG). The deviation of IBM results from BFG results is found to increase with increasing nonlinearity in the wave field that is associated with either increasing steepness of the topography relative to the internal wave propagation angle or with the amplitude of the oscillatory forcing. LES is performed on a large scale ridge, of the order of few kilometers in length, that has the same geometrical shape and same non-dimensional values for the governing flow and environmental parameters as the laboratory-scale topography, but significantly larger Reynolds number. A non-linear drag law is utilized in the large-scale application to parameterize turbulent losses due to bottom friction at high Reynolds number. The large scale problem exhibits qualitatively similar behavior to the laboratory scale problem with some differences: slightly larger intensification of the boundary flow and somewhat higher non-dimensional values for the energy fluxed away by the internal wave field. The phasing of wave breaking and turbulence exhibits little difference between small-scale and large-scale obstacles as long as the important non-dimensional parameters are kept the same. We conclude that IBM is a viable approach to the simulation of internal waves and turbulence in high Reynolds number stratified flows over topography.

Aid to planning the marketing of mining area boundaries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giles, R.H. Jr.

Reducing trespass, legal costs, and timber and wildlife poaching and increasing control, safety, and security are key reasons why mine land boundaries need to be marked. Accidents may be reduced, especially when associated with blast area boundaries, and in some cases increased income may be gained from hunting and recreational fees on well-marked areas. A BASIC computer program for an IBM-PC has been developed that requires minimum inputs to estimate boundary marking costs. This paper describes the rationale for the program and shows representative outputs. 3 references, 3 tables.

How new concepts become universal scientific approaches: insights from citation network analysis of agent-based complex systems science.

PubMed

Vincenot, Christian E

2018-03-14

Progress in understanding and managing complex systems comprised of decision-making agents, such as cells, organisms, ecosystems or societies, is-like many scientific endeavours-limited by disciplinary boundaries. These boundaries, however, are moving and can actively be made porous or even disappear. To study this process, I advanced an original bibliometric approach based on network analysis to track and understand the development of the model-based science of agent-based complex systems (ACS). I analysed research citations between the two communities devoted to ACS research, namely agent-based (ABM) and individual-based modelling (IBM). Both terms refer to the same approach, yet the former is preferred in engineering and social sciences, while the latter prevails in natural sciences. This situation provided a unique case study for grasping how a new concept evolves distinctly across scientific domains and how to foster convergence into a universal scientific approach. The present analysis based on novel hetero-citation metrics revealed the historical development of ABM and IBM, confirmed their past disjointedness, and detected their progressive merger. The separation between these synonymous disciplines had silently opposed the free flow of knowledge among ACS practitioners and thereby hindered the transfer of methodological advances and the emergence of general systems theories. A surprisingly small number of key publications sparked the ongoing fusion between ABM and IBM research. Beside reviews raising awareness of broad-spectrum issues, generic protocols for model formulation and boundary-transcending inference strategies were critical means of science integration. Accessible broad-spectrum software similarly contributed to this change. From the modelling viewpoint, the discovery of the unification of ABM and IBM demonstrates that a wide variety of systems substantiate the premise of ACS research that microscale behaviours of agents and system-level dynamics are inseparably bound. © 2018 The Author(s).

The Spatial and Temporal Variability of the Arctic Atmospheric Boundary Layer and Its Effect on Electromagnetic (EM) Propagation.

DTIC Science & Technology

1987-12-01

could be run on the IBM 3033 mainframe at the Naval Postgraduate School. I would also like to thank Lt. Mike Dotson whose thesis provided the...29 pressure levels by using an interactive graphing package, Grafstat, available on the IBM 3033 mainframe at the Naval Postgraduate School. Profiles...Polarstern should probably have been 65 . ¢,- .. ... .. .. -- --- P4. itp so’ W. . Fi.3 5. Cae1 p sbr,1 u,10UC n hpslctosa anh20UC (1) S, 40 m ito ce 2) P, MZ

Coupling molecular dynamics with lattice Boltzmann method based on the immersed boundary method

NASA Astrophysics Data System (ADS)

Tan, Jifu; Sinno, Talid; Diamond, Scott

2017-11-01

The study of viscous fluid flow coupled with rigid or deformable solids has many applications in biological and engineering problems, e.g., blood cell transport, drug delivery, and particulate flow. We developed a partitioned approach to solve this coupled Multiphysics problem. The fluid motion was solved by Palabos (Parallel Lattice Boltzmann Solver), while the solid displacement and deformation was simulated by LAMMPS (Large-scale Atomic/Molecular Massively Parallel Simulator). The coupling was achieved through the immersed boundary method (IBM). The code modeled both rigid and deformable solids exposed to flow. The code was validated with the classic problem of rigid ellipsoid particle orbit in shear flow, blood cell stretching test and effective blood viscosity, and demonstrated essentially linear scaling over 16 cores. An example of the fluid-solid coupling was given for flexible filaments (drug carriers) transport in a flowing blood cell suspensions, highlighting the advantages and capabilities of the developed code. NIH 1U01HL131053-01A1.

Asynchronous Communication of TLNS3DMB Boundary Exchange

NASA Technical Reports Server (NTRS)

Hammond, Dana P.

1997-01-01

This paper describes the recognition of implicit serialization due to coarse-grain, synchronous communication and demonstrates the conversion to asynchronous communication for the exchange of boundary condition information in the Thin-Layer Navier Stokes 3-Dimensional Multi Block (TLNS3DMB) code. The implementation details of using asynchronous communication is provided including buffer allocation, message identification, and barrier control. The IBM SP2 was used for the tests presented.

An interactive program to display user-generated or file-based maps on a personal computer monitor

USGS Publications Warehouse

Langer, W.H.; Stephens, R.W.

1987-01-01

PC MAP-MAKER is an ADVANCED BASIC program written to provide users of IBM XT, IBM AT, and compatible computers with a straight-forward, flexible method to display geographical data on a color or monochrome PC (personal computer) monitor. Data can be political boundaries such as State and county boundaries; natural curvilinear features such as rivers, drainage areas, and geological contacts; and points such as well locations and mineral localities. Essentially any point defined by a latitude and longitude and any line defined by a series of latitude and longitude values can be displayed using the program. PC MAP MAKER allows users to view tabular data from U.S. Geological Survey files such as WATSTORE (National Water Data Storage and Retrieval System) in a map format in a time much shorter than required by sending the data to a line plotter. The screen image can be saved to disk for recall at a later date, and hard copies can be printed with a dot matrix printer. The program is user-friendly, using menus or prompts to guide user input. It is fully documented and structured to allow the user to tailor the program to the user 's specific needs. The documentation includes a tutorial designed to introduce users to the capabilities of the program using the State of Colorado as a demonstration map area. (Author 's abstract)

Large eddy simulation for predicting turbulent heat transfer in gas turbines

PubMed Central

Tafti, Danesh K.; He, Long; Nagendra, K.

2014-01-01

Blade cooling technology will play a critical role in the next generation of propulsion and power generation gas turbines. Accurate prediction of blade metal temperature can avoid the use of excessive compressed bypass air and allow higher turbine inlet temperature, increasing fuel efficiency and decreasing emissions. Large eddy simulation (LES) has been established to predict heat transfer coefficients with good accuracy under various non-canonical flows, but is still limited to relatively simple geometries and low Reynolds numbers. It is envisioned that the projected increase in computational power combined with a drop in price-to-performance ratio will make system-level simulations using LES in complex blade geometries at engine conditions accessible to the design process in the coming one to two decades. In making this possible, two key challenges are addressed in this paper: working with complex intricate blade geometries and simulating high-Reynolds-number (Re) flows. It is proposed to use the immersed boundary method (IBM) combined with LES wall functions. A ribbed duct at Re=20 000 is simulated using the IBM, and a two-pass ribbed duct is simulated at Re=100 000 with and without rotation (rotation number Ro=0.2) using LES with wall functions. The results validate that the IBM is a viable alternative to body-conforming grids and that LES with wall functions reproduces experimental results at a much lower computational cost. PMID:25024418

Program for Calculating the Cubic and Fifth Roots of a Number of Newton's Method (610 IBM Electronic Computer); PROGRAMMA PER IL CALCOLO DELLE RADICI TERZA E QUINTA DI UN NUMERO, COL METODO DI NEWTON (CALCOLATORE ELETTRONICO IBM 610)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giucci, D.

1963-01-01

A program was devised for calculating the cubic and fifth roots of a number of Newton's method using the 610 IBM electronic computer. For convenience a program was added for obtaining n/sup th/ roots by the logarithmic method. (auth)

DESIGN OF TWO-DIMENSIONAL SUPERSONIC TURBINE ROTOR BLADES WITH BOUNDARY-LAYER CORRECTION

NASA Technical Reports Server (NTRS)

Goldman, L. J.

1994-01-01

A computer program has been developed for the design of supersonic rotor blades where losses are accounted for by correcting the ideal blade geometry for boundary layer displacement thickness. The ideal blade passage is designed by the method of characteristics and is based on establishing vortex flow within the passage. Boundary-layer parameters (displacement and momentum thicknesses) are calculated for the ideal passage, and the final blade geometry is obtained by adding the displacement thicknesses to the ideal nozzle coordinates. The boundary-layer parameters are also used to calculate the aftermixing conditions downstream of the rotor blades assuming the flow mixes to a uniform state. The computer program input consists essentially of the rotor inlet and outlet Mach numbers, upper- and lower-surface Mach numbers, inlet flow angle, specific heat ratio, and total flow conditions. The program gas properties are set up for air. Additional gases require changes to be made to the program. The computer output consists of the corrected rotor blade coordinates, the principal boundary-layer parameters, and the aftermixing conditions. This program is written in FORTRAN IV for batch execution and has been implemented on an IBM 7094. This program was developed in 1971.

Pre and post processing using the IBM 3277 display station graphics attachment (RPQ7H0284)

NASA Technical Reports Server (NTRS)

Burroughs, S. H.; Lawlor, M. B.; Miller, I. M.

1978-01-01

A graphical interactive procedure operating under TSO and utilizing two CRT display terminals is shown to be an effective means of accomplishing mesh generation, establishing boundary conditions, and reviewing graphic output for finite element analysis activity.

A geometry-adaptive IB-LBM for FSI problems at moderate and high Reynolds numbers

NASA Astrophysics Data System (ADS)

Tian, Fangbao; Xu, Lincheng; Young, John; Lai, Joseph C. S.

2017-11-01

An FSI framework combining the LBM and an improved IBM is introduced for FSI problems at moderate and high Reynolds numbers. In this framework, the fluid dynamics is obtained by the LBM. The FSI boundary conditions are handled by an improved IBM based on the feedback scheme where the feedback coefficient is mathematically derived and explicitly approximated. The Lagrangian force is divided into two parts: one is caused by the mismatching of the flow velocity and the boundary velocity at previous time step, and the other is caused by the boundary acceleration. Such treatment significantly enhances the numerical stability. A geometry-adaptive refinement is applied to provide fine resolution around the immersed geometries. The overlapping grids between two adjacent refinements consist of two layers. The movement of fluid-structure interfaces only causes adding or removing grids at the boundaries of refinements. Finally, the classic Smagorinsky large eddy simulation model is incorporated into the framework to model turbulent flows at relatively high Reynolds numbers. Several validation cases are conducted to verify the accuracy and fidelity of the present solver over a range of Reynolds numbers. Mr L. Xu acknowledges the support of the University International Postgraduate Award by University of New South Wales. Dr. F.-B. Tian is the recipient of an Australian Research Council Discovery Early Career Researcher Award (Project Number DE160101098).

Fluid Dynamics of Competitive Swimming: A Computational Study

NASA Astrophysics Data System (ADS)

Mittal, Rajat; Loebbeck, Alfred; Singh, Hersh; Mark, Russell; Wei, Timothy

2004-11-01

The dolphin kick is an important component in competitive swimming and is used extensively by swimmers immediately following the starting dive as well as after turns. In this stroke, the swimmer swims about three feet under the water surface and the stroke is executed by performing an undulating wave-like motion of the body that is quite similar to the anguilliform propulsion mode in fish. Despite the relatively simple kinematics of this stoke, considerable variability in style and performance is observed even among Olympic level swimmers. Motivated by this, a joint experimental-numerical study has been initiated to examine the fluid-dynamics of this stroke. The current presentation will describe the computational portion of this study. The computations employ a sharp interface immersed boundary method (IBM) which allows us to simulate flows with complex moving boudnaries on stationary Cartesian grids. 3D body scans of male and female Olympic swimmers have been obtained and these are used in conjuction with high speed videos to recreate a realistic dolphin kick for the IBM solver. Preliminary results from these computations will be presented.

Numerical study of dam-break induced tsunami-like bore with a hump of different slopes

NASA Astrophysics Data System (ADS)

Cheng, Du; Zhao, Xi-zeng; Zhang, Da-ke; Chen, Yong

2017-12-01

Numerical simulation of dam-break wave, as an imitation of tsunami hydraulic bore, with a hump of different slopes is performed in this paper using an in-house code, named a Constrained Interpolation Profile (CIP)-based model. The model is built on a Cartesian grid system with the Navier Stokes equations using a CIP method for the flow solver, and employs an immersed boundary method (IBM) for the treatment of solid body boundary. A more accurate interface capturing scheme, the Tangent of hyperbola for interface capturing/Slope weighting (THINC/SW) scheme, is adopted as the interface capturing method. Then, the CIP-based model is applied to simulate the dam break flow problem in a bumpy channel. Considerable attention is paid to the spilling type reflected bore, the following spilling type wave breaking, free surface profiles and water level variations over time. Computations are compared with available experimental data and other numerical results quantitatively and qualitatively. Further investigation is conducted to analyze the influence of variable slopes on the flow features of the tsunami-like bore.

Large eddy simulation for predicting turbulent heat transfer in gas turbines.

PubMed

Tafti, Danesh K; He, Long; Nagendra, K

2014-08-13

Blade cooling technology will play a critical role in the next generation of propulsion and power generation gas turbines. Accurate prediction of blade metal temperature can avoid the use of excessive compressed bypass air and allow higher turbine inlet temperature, increasing fuel efficiency and decreasing emissions. Large eddy simulation (LES) has been established to predict heat transfer coefficients with good accuracy under various non-canonical flows, but is still limited to relatively simple geometries and low Reynolds numbers. It is envisioned that the projected increase in computational power combined with a drop in price-to-performance ratio will make system-level simulations using LES in complex blade geometries at engine conditions accessible to the design process in the coming one to two decades. In making this possible, two key challenges are addressed in this paper: working with complex intricate blade geometries and simulating high-Reynolds-number (Re) flows. It is proposed to use the immersed boundary method (IBM) combined with LES wall functions. A ribbed duct at Re=20 000 is simulated using the IBM, and a two-pass ribbed duct is simulated at Re=100 000 with and without rotation (rotation number Ro=0.2) using LES with wall functions. The results validate that the IBM is a viable alternative to body-conforming grids and that LES with wall functions reproduces experimental results at a much lower computational cost. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

LION4; LION; three-dimensional temperature distribution program. [CDC6600,7600; UNIVAC1108; IBM360,370; FORTRAN IV and ASCENT (CDC6600,7600), FORTRAN IV (UNIVAC1108A,B and IBM360,370)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Binney, E.J.

LION4 is a computer program for calculating one-, two-, or three-dimensional transient and steady-state temperature distributions in reactor and reactor plant components. It is used primarily for thermal-structural analyses. It utilizes finite difference techniques with first-order forward difference integration and is capable of handling a wide variety of bounding conditions. Heat transfer situations accommodated include forced and free convection in both reduced and fully-automated temperature dependent forms, coolant flow effects, a limited thermal radiation capability, a stationary or stagnant fluid gap, a dual dependency (temperature difference and temperature level) heat transfer, an alternative heat transfer mode comparison and selection facilitymore » combined with heat flux direction sensor, and any form of time-dependent boundary temperatures. The program, which handles time and space dependent internal heat generation, can also provide temperature dependent material properties with limited non-isotropic properties. User-oriented capabilities available include temperature means with various weightings and a complete heat flow rate surveillance system.CDC6600,7600;UNIVAC1108;IBM360,370; FORTRAN IV and ASCENT (CDC6600,7600), FORTRAN IV (UNIVAC1108A,B and IBM360,370); SCOPE (CDC6600,7600), EXEC8 (UNIVAC1108A,B), OS/360,370 (IBM360,370); The CDC6600 version plotter routine LAPL4 is used to produce the input required by the associated CalComp plotter for graphical output. The IBM360 version requires 350K for execution and one additional input/output unit besides the standard units.« less

Sikorsky interactive graphics surface design/manufacturing system

NASA Technical Reports Server (NTRS)

Robbins, R.

1975-01-01

An interactive graphics system conceived to be used in the design, analysis, and manufacturing of aircraft components with free form surfaces was described. In addition to the basic surface definition and viewing capabilities inherent in such a system, numerous other features are present: surface editing, automated smoothing of control curves, variable milling patch boundary definitions, surface intersection definition and viewing, automatic creation of true offset surfaces, digitizer and drafting machine interfaces, and cutter path optimization. Documented costs and time savings of better than six to one are being realized with this system. The system was written in FORTRAN and GSP for use on IBM 2250 CRT's in conjunction with an IBM 370/158 computer.

Simulation of the self-assembly of colloidal droplets in a micro-channel

NASA Astrophysics Data System (ADS)

Ge, Zhouyang; Brandt, Luca

2016-11-01

In colloidal sciences, much progress has been made on the synthesis of complex building blocks mimicking molecular structures to elaborate innovative materials. The basic elements of such colloidal molecules are particles or droplets less than one millimeter in size. Their self-assembly relies on either lengthy brownian motion or careful microfludic designs, on top of typical colloidal interactions, e.g. depletion attraction. Regardless of the approach, however, questions remain why the colloids undergo certain path to organize themselves and how such process can be optimized. Here, we perform direct numerical simulations using a Navier-Stokes solver at low Reynolds number, combined with either the immersed boundary method (IBM) or a newly-proposed level set (LS) method for interface description. In the IBM simulations, the colloids are treated as rigid, spherical particles under a Lennard-Jones-like potential, reproducing attractive depletion force. Results show that, for four particles, a planar diamond is formed under a weak potential while a 3D tetrahedron is formed under a strong potential, which agree qualitatively with experiments. In the next step, LS simulation of colloidal droplets will be performed to investigate the roles of surface tension in the self-assembly. This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant agreement No 664823.

A second-order accurate immersed boundary-lattice Boltzmann method for particle-laden flows

NASA Astrophysics Data System (ADS)

Zhou, Qiang; Fan, Liang-Shih

2014-07-01

A new immersed boundary-lattice Boltzmann method (IB-LBM) is presented for fully resolved simulations of incompressible viscous flows laden with rigid particles. The immersed boundary method (IBM) recently developed by Breugem (2012) [19] is adopted in the present method, development including the retraction technique, the multi-direct forcing method and the direct account of the inertia of the fluid contained within the particles. The present IB-LBM is, however, formulated with further improvement with the implementation of the high-order Runge-Kutta schemes in the coupled fluid-particle interaction. The major challenge to implement high-order Runge-Kutta schemes in the LBM is that the flow information such as density and velocity cannot be directly obtained at a fractional time step from the LBM since the LBM only provides the flow information at an integer time step. This challenge can be, however, overcome as given in the present IB-LBM by extrapolating the flow field around particles from the known flow field at the previous integer time step. The newly calculated fluid-particle interactions from the previous fractional time steps of the current integer time step are also accounted for in the extrapolation. The IB-LBM with high-order Runge-Kutta schemes developed in this study is validated by several benchmark applications. It is demonstrated, for the first time, that the IB-LBM has the capacity to resolve the translational and rotational motion of particles with the second-order accuracy. The optimal retraction distances for spheres and tubes that help the method achieve the second-order accuracy are found to be around 0.30 and -0.47 times of the lattice spacing, respectively. Simulations of the Stokes flow through a simple cubic lattice of rotational spheres indicate that the lift force produced by the Magnus effect can be very significant in view of the magnitude of the drag force when the practical rotating speed of the spheres is encountered. This finding may lead to more comprehensive studies of the effect of the particle rotation on fluid-solid drag laws. It is also demonstrated that, when the third-order or the fourth-order Runge-Kutta scheme is used, the numerical stability of the present IB-LBM is better than that of all methods in the literature, including the previous IB-LBMs and also the methods with the combination of the IBM and the traditional incompressible Navier-Stokes solver.

A Method for Transferring Photoelectric Photometry Data from Apple II+ to IBM PC

NASA Astrophysics Data System (ADS)

Powell, Harry D.; Miller, James R.; Stephenson, Kipp

1989-06-01

A method is presented for transferring photoelectric photometry data files from an Apple II computer to an IBM PC computer in a form which is compatible with the AAVSO Photoelectric Photometry data collection process.

GRID3O- FAST GENERATION OF MULTILEVEL, THREE-DIMENSIONAL BOUNDARY-CONFORMING O-TYPE COMPUTATIONAL GRIDS

NASA Technical Reports Server (NTRS)

Dulikravich, D. S.

1994-01-01

A fast algorithm has been developed for accurately generating boundary-conforming, three-dimensional consecutively refined computational grids applicable to arbitrary wing-body and axial turbomachinery geometries. This algorithm has been incorporated into the GRID3O computer program. The method employed in GRID3O is based on using an analytic function to generate two-dimensional grids on a number of coaxial axisymmetric surfaces positioned between the centerbody and the outer radial boundary. These grids are of the O-type and are characterized by quasi-orthogonality, geometric periodicity, and an adequate resolution throughout the flow field. Because the built-in nonorthogonal coordinate stretching and shearing cause the grid lines leaving the blade or wing trailing-edge to end at downstream infinity, use of the generated grid simplifies the numerical treatment of three-dimensional trailing vortex sheets. The GRID3O program is written in FORTRAN IV for batch execution and has been implemented on an IBM 370 series computer with a central memory requirement of approximately 450K of 8 bit bytes. The GRID3O program was developed in 1981.

Study of Particle Rotation Effect in Gas-Solid Flows using Direct Numerical Simulation with a Lattice Boltzmann Method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kwon, Kyung; Fan, Liang-Shih; Zhou, Qiang

A new and efficient direct numerical method with second-order convergence accuracy was developed for fully resolved simulations of incompressible viscous flows laden with rigid particles. The method combines the state-of-the-art immersed boundary method (IBM), the multi-direct forcing method, and the lattice Boltzmann method (LBM). First, the multi-direct forcing method is adopted in the improved IBM to better approximate the no-slip/no-penetration (ns/np) condition on the surface of particles. Second, a slight retraction of the Lagrangian grid from the surface towards the interior of particles with a fraction of the Eulerian grid spacing helps increase the convergence accuracy of the method. Anmore » over-relaxation technique in the procedure of multi-direct forcing method and the classical fourth order Runge-Kutta scheme in the coupled fluid-particle interaction were applied. The use of the classical fourth order Runge-Kutta scheme helps the overall IB-LBM achieve the second order accuracy and provides more accurate predictions of the translational and rotational motion of particles. The preexistent code with the first-order convergence rate is updated so that the updated new code can resolve the translational and rotational motion of particles with the second-order convergence rate. The updated code has been validated with several benchmark applications. The efficiency of IBM and thus the efficiency of IB-LBM were improved by reducing the number of the Lagragian markers on particles by using a new formula for the number of Lagrangian markers on particle surfaces. The immersed boundary-lattice Boltzmann method (IBLBM) has been shown to predict correctly the angular velocity of a particle. Prior to examining drag force exerted on a cluster of particles, the updated IB-LBM code along with the new formula for the number of Lagrangian markers has been further validated by solving several theoretical problems. Moreover, the unsteadiness of the drag force is examined when a fluid is accelerated from rest by a constant average pressure gradient toward a steady Stokes flow. The simulation results agree well with the theories for the short- and long-time behavior of the drag force. Flows through non-rotational and rotational spheres in simple cubic arrays and random arrays are simulated over the entire range of packing fractions, and both low and moderate particle Reynolds numbers to compare the simulated results with the literature results and develop a new drag force formula, a new lift force formula, and a new torque formula. Random arrays of solid particles in fluids are generated with Monte Carlo procedure and Zinchenko's method to avoid crystallization of solid particles over high solid volume fractions. A new drag force formula was developed with extensive simulated results to be closely applicable to real processes over the entire range of packing fractions and both low and moderate particle Reynolds numbers. The simulation results indicate that the drag force is barely affected by rotational Reynolds numbers. Drag force is basically unchanged as the angle of the rotating axis varies.« less

IBM system/360 assembly language interval arithmetic software

NASA Technical Reports Server (NTRS)

Phillips, E. J.

1972-01-01

Computer software designed to perform interval arithmetic is described. An interval is defined as the set of all real numbers between two given numbers including or excluding one or both endpoints. Interval arithmetic consists of the various elementary arithmetic operations defined on the set of all intervals, such as interval addition, subtraction, union, etc. One of the main applications of interval arithmetic is in the area of error analysis of computer calculations. For example, it has been used sucessfully to compute bounds on sounding errors in the solution of linear algebraic systems, error bounds in numerical solutions of ordinary differential equations, as well as integral equations and boundary value problems. The described software enables users to implement algorithms of the type described in references efficiently on the IBM 360 system.

Evaluation and construction of diagnostic criteria for inclusion body myositis

PubMed Central

Mammen, Andrew L.; Amato, Anthony A.; Weiss, Michael D.; Needham, Merrilee

2014-01-01

Objective: To use patient data to evaluate and construct diagnostic criteria for inclusion body myositis (IBM), a progressive disease of skeletal muscle. Methods: The literature was reviewed to identify all previously proposed IBM diagnostic criteria. These criteria were applied through medical records review to 200 patients diagnosed as having IBM and 171 patients diagnosed as having a muscle disease other than IBM by neuromuscular specialists at 2 institutions, and to a validating set of 66 additional patients with IBM from 2 other institutions. Machine learning techniques were used for unbiased construction of diagnostic criteria. Results: Twenty-four previously proposed IBM diagnostic categories were identified. Twelve categories all performed with high (≥97%) specificity but varied substantially in their sensitivities (11%–84%). The best performing category was European Neuromuscular Centre 2013 probable (sensitivity of 84%). Specialized pathologic features and newly introduced strength criteria (comparative knee extension/hip flexion strength) performed poorly. Unbiased data-directed analysis of 20 features in 371 patients resulted in construction of higher-performing data-derived diagnostic criteria (90% sensitivity and 96% specificity). Conclusions: Published expert consensus–derived IBM diagnostic categories have uniformly high specificity but wide-ranging sensitivities. High-performing IBM diagnostic category criteria can be developed directly from principled unbiased analysis of patient data. Classification of evidence: This study provides Class II evidence that published expert consensus–derived IBM diagnostic categories accurately distinguish IBM from other muscle disease with high specificity but wide-ranging sensitivities. PMID:24975859

Attaching IBM-compatible 3380 disks to Cray X-MP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engert, D.E.; Midlock, J.L.

1989-01-01

A method of attaching IBM-compatible 3380 disks directly to a Cray X-MP via the XIOP with a BMC is described. The IBM 3380 disks appear to the UNICOS operating system as DD-29 disks with UNICOS file systems. IBM 3380 disks provide cheap, reliable large capacity disk storage. Combined with a small number of high-speed Cray disks, the IBM disks provide for the bulk of the storage for small files and infrequently used files. Cray Research designed the BMC and its supporting software in the XIOP to allow IBM tapes and other devices to be attached to the X-MP. No hardwaremore » changes were necessary, and we added less than 2000 lines of code to the XIOP to accomplish this project. This system has been in operation for over eight months. Future enhancements such as the use of a cache controller and attachment to a Y-MP are also described. 1 tab.« less

Computational modeling of magnetic particle margination within blood flow through LAMMPS

NASA Astrophysics Data System (ADS)

Ye, Huilin; Shen, Zhiqiang; Li, Ying

2017-11-01

We develop a multiscale and multiphysics computational method to investigate the transport of magnetic particles as drug carriers in blood flow under influence of hydrodynamic interaction and external magnetic field. A hybrid coupling method is proposed to handle red blood cell (RBC)-fluid interface (CFI) and magnetic particle-fluid interface (PFI), respectively. Immersed boundary method (IBM)-based velocity coupling is used to account for CFI, which is validated by tank-treading and tumbling behaviors of a single RBC in simple shear flow. While PFI is captured by IBM-based force coupling, which is verified through movement of a single magnetic particle under non-uniform external magnetic field and breakup of a magnetic chain in rotating magnetic field. These two components are seamlessly integrated within the LAMMPS framework, which is a highly parallelized molecular dynamics solver. In addition, we also implement a parallelized lattice Boltzmann simulator within LAMMPS to handle the fluid flow simulation. Based on the proposed method, we explore the margination behaviors of magnetic particles and magnetic chains within blood flow. We find that the external magnetic field can be used to guide the motion of these magnetic materials and promote their margination to the vascular wall region. Moreover, the scaling performance and speedup test further confirm the high efficiency and robustness of proposed computational method. Therefore, it provides an efficient way to simulate the transport of nanoparticle-based drug carriers within blood flow in a large scale. The simulation results can be applied in the design of efficient drug delivery vehicles that optimally accumulate within diseased tissue, thus providing better imaging sensitivity, therapeutic efficacy and lower toxicity.

Two autowire versions for CDC-3200 and IBM-360

NASA Technical Reports Server (NTRS)

Billingsley, J. B.

1972-01-01

Microelectronics program was initiated to evaluate circuitry, packaging methods, and fabrication approaches necessary to produce completely procured logic system. Two autowire programs were developed for CDC-3200 and IBM-360 computers for use in designing logic systems.

IBM techexplorer and MathML: Interactive Multimodal Scientific Documents

NASA Astrophysics Data System (ADS)

Diaz, Angel

2001-06-01

The World Wide Web provides a standard publishing platform for disseminating scientific and technical articles, books, journals, courseware, or even homework on the internet; however, the transition from paper to web-based interactive content has brought new opportunities for creating interactive content. Students, scientists, and engineers are now faced with the task of rendering the 2D presentational structure of mathematics, harnessing the wealth of scientific and technical software, and creating truly accessible scientific portals across international boundaries and markets. The recent emergence of World Wide Web Consortium (W3C) standards such as the Mathematical Markup Language (MathML), Language (XSL), and Aural CSS (ACSS) provide a foundation whereby mathematics can be displayed, enlivened, computed, and audio formatted. With interoperability ensured by standards, software applications can be easily brought together to create extensible and interactive scientific content. In this presentation we will provide an overview of the IBM techexplorer Hypermedia Browser, a web browser plug-in and ActiveX control aimed at bringing interactive mathematics to the masses across platforms and applications. We will demonstrate "live" mathematics where documents that contain MathML expressions can be edited and computed right inside your favorite web browser. This demonstration will be generalized as we show how MathML can be used to enliven even PowerPoint presentations. Finally, we will close the loop by demonstrating a novel approach to spoken mathematics based on MathML, DOM, XSL, ACSS, techexplorer, and IBM ViaVoice. By making use of techexplorer as the glue that binds the rendered content to the web browser, the back-end computation software, the Java applets that augment the exposition, and voice-rendering systems such as ViaVoice, authors can indeed create truly extensible and interactive scientific content. For more information see: [http://www.software.ibm.com/techexplorer] [http://www.alphaworks.ibm.com] [http://www.w3.org

Wave packet dynamics, time scales and phase diagram in the IBM-Lipkin-Meshkov-Glick model

NASA Astrophysics Data System (ADS)

Castaños, Octavio; de los Santos, Francisco; Yáñez, Rafael; Romera, Elvira

2018-02-01

We derive the phase diagram of a scalar two-level boson model by studying the equilibrium and stability properties of its energy surface. The plane of control parameters is enlarged with respect to previous studies. We then analyze the time evolution of wave packets centered around the ground state at various quantum phase transition boundary lines. In particular, classical and revival times are computed numerically.

The web server of IBM's Bioinformatics and Pattern Discovery group.

PubMed

Huynh, Tien; Rigoutsos, Isidore; Parida, Laxmi; Platt, Daniel; Shibuya, Tetsuo

2003-07-01

We herein present and discuss the services and content which are available on the web server of IBM's Bioinformatics and Pattern Discovery group. The server is operational around the clock and provides access to a variety of methods that have been published by the group's members and collaborators. The available tools correspond to applications ranging from the discovery of patterns in streams of events and the computation of multiple sequence alignments, to the discovery of genes in nucleic acid sequences and the interactive annotation of amino acid sequences. Additionally, annotations for more than 70 archaeal, bacterial, eukaryotic and viral genomes are available on-line and can be searched interactively. The tools and code bundles can be accessed beginning at http://cbcsrv.watson.ibm.com/Tspd.html whereas the genomics annotations are available at http://cbcsrv.watson.ibm.com/Annotations/.

The web server of IBM's Bioinformatics and Pattern Discovery group

PubMed Central

Huynh, Tien; Rigoutsos, Isidore; Parida, Laxmi; Platt, Daniel; Shibuya, Tetsuo

2003-01-01

We herein present and discuss the services and content which are available on the web server of IBM's Bioinformatics and Pattern Discovery group. The server is operational around the clock and provides access to a variety of methods that have been published by the group's members and collaborators. The available tools correspond to applications ranging from the discovery of patterns in streams of events and the computation of multiple sequence alignments, to the discovery of genes in nucleic acid sequences and the interactive annotation of amino acid sequences. Additionally, annotations for more than 70 archaeal, bacterial, eukaryotic and viral genomes are available on-line and can be searched interactively. The tools and code bundles can be accessed beginning at http://cbcsrv.watson.ibm.com/Tspd.html whereas the genomics annotations are available at http://cbcsrv.watson.ibm.com/Annotations/. PMID:12824385

SUMMARY OF PROGRESS REPORT ON NUCLEAR PHYSICS , DURING YEARLY PERIOD ENDING IN FEBRUARY 1963

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1963-10-31

Aspects of nucleon-nucleon interactions are being examined. Tests of the mathematical form of the one-pion exchange interaction and of the validity of charge independence were improved. No real negation of the applicability of either the mathematical form of the one-pion exchange potential or of charge independence has been found. Work on p-p and p-n scattering analysis centered on improving the accuracy of data and on rewriting IBM 704 programs for the IBM 709 and 7090. The new programs provide separate treatments of errors in quantities such as differential cross sections and in relative values at the same incident energy. Improvementsmore » in the least squares method of adjustment to data were also made. Difficulties in correcting for the effects of nuclear magnetic moments were examined, and formulas and numbers giving the corrections applicable to the one-pion exchange group were worked out and incorporated in new machine programs. A partial analysis of data for n-p scattering in the 2 to 3 Bev energy region shows the existence of a sharp peak in the angular distribution of recoil protons from elastic collisions. Interpretation of work on the interplay of multipion resonance effects with each other and with the direct pion interaction was begun. Systematization of spin rotation effect and aspects of relativistic effects in the Coulomb interaction in p-p scattering was carried out. Treatment of N-N spin- orbit and central field interactions caused by vector meson exchange was improved. Programming of the IBM 709 for computation of the first order nucleonnucleus optical potential and nucleon-nucleus observables in first Born approximation at forward angles from N-N phase parameters was performed. An IBM 709 program for computing pi -N scattering observables from phase shifts was also written. Investigation of photodisintegration of deuterons involved correcting the formulas used in calculating higher order magnetic multipole effects for some omitted effects and rewriting the 704 programs for the IBM 709. Progress in a scattering matrix approach to deuteron photodisintegration was also made. In theory of nucleon-transfer reactions, systematization of the connection between completely quantum mechanical and semiclassical treatments, including analysis of approximations required in the former to obtain the latter, was attempted. Presence of interference effects between the waves was partially confirmed by experiment. Calculations of third order effects in Coulomb excitation were carried out, and programming for more extensive work was begun. Work on interpretation of heavy ion elastic scattering involved additional calculations of the interaction using nucleonnucleus scattering with some calculations using an ingoing wave boundary condition instead of an optical model treatment of the nuclear interior. Twenty-one papers published or submitted for publication during the period are listed. (D.C.W.)« less

Insight into mitochondrial structure and function from electron tomography.

PubMed

Frey, T G; Renken, C W; Perkins, G A

2002-09-10

In recent years, electron tomography has provided detailed three-dimensional models of mitochondria that have redefined our concept of mitochondrial structure. The models reveal an inner membrane consisting of two components, the inner boundary membrane (IBM) closely apposed to the outer membrane and the cristae membrane that projects into the matrix compartment. These two components are connected by tubular structures of relatively uniform size called crista junctions. The distribution of crista junction sizes and shapes is predicted by a thermodynamic model based upon the energy of membrane bending, but proteins likely also play a role in determining the conformation of the inner membrane. Results of structural studies of mitochondria during apoptosis demonstrate that cytochrome c is released without detectable disruption of the outer membrane or extensive swelling of the mitochondrial matrix, suggesting the formation of an outer membrane pore large enough to allow passage of holo-cytochrome c. The possible compartmentation of inner membrane function between the IBM and the cristae membrane is also discussed.

Large eddy simulation of transitional flow in an idealized stenotic blood vessel: evaluation of subgrid scale models.

PubMed

Pal, Abhro; Anupindi, Kameswararao; Delorme, Yann; Ghaisas, Niranjan; Shetty, Dinesh A; Frankel, Steven H

2014-07-01

In the present study, we performed large eddy simulation (LES) of axisymmetric, and 75% stenosed, eccentric arterial models with steady inflow conditions at a Reynolds number of 1000. The results obtained are compared with the direct numerical simulation (DNS) data (Varghese et al., 2007, "Direct Numerical Simulation of Stenotic Flows. Part 1. Steady Flow," J. Fluid Mech., 582, pp. 253-280). An inhouse code (WenoHemo) employing high-order numerical methods for spatial and temporal terms, along with a 2nd order accurate ghost point immersed boundary method (IBM) (Mark, and Vanwachem, 2008, "Derivation and Validation of a Novel Implicit Second-Order Accurate Immersed Boundary Method," J. Comput. Phys., 227(13), pp. 6660-6680) for enforcing boundary conditions on curved geometries is used for simulations. Three subgrid scale (SGS) models, namely, the classical Smagorinsky model (Smagorinsky, 1963, "General Circulation Experiments With the Primitive Equations," Mon. Weather Rev., 91(10), pp. 99-164), recently developed Vreman model (Vreman, 2004, "An Eddy-Viscosity Subgrid-Scale Model for Turbulent Shear Flow: Algebraic Theory and Applications," Phys. Fluids, 16(10), pp. 3670-3681), and the Sigma model (Nicoud et al., 2011, "Using Singular Values to Build a Subgrid-Scale Model for Large Eddy Simulations," Phys. Fluids, 23(8), 085106) are evaluated in the present study. Evaluation of SGS models suggests that the classical constant coefficient Smagorinsky model gives best agreement with the DNS data, whereas the Vreman and Sigma models predict an early transition to turbulence in the poststenotic region. Supplementary simulations are performed using Open source field operation and manipulation (OpenFOAM) ("OpenFOAM," http://www.openfoam.org/) solver and the results are inline with those obtained with WenoHemo.

ISS Payload Racks Automated Flow Control Calibration Method

NASA Technical Reports Server (NTRS)

Simmonds, Boris G.

2003-01-01

Payload Racks utilize MTL and/or LTL station water for cooling of payloads and avionics. Flow control range from valves of fully closed, to up to 300 Ibmhr. Instrument accuracies are as high as f 7.5 Ibm/hr for flow sensors and f 3 Ibm/hr for valve controller, for a total system accuracy of f 10.5 Ibm/hr. Improved methodology was developed, tested and proven that reduces accuracy of the commanded flows to less than f 1 Ibmhr. Uethodology could be packed in a "calibration kit" for on- orbit flow sensor checkout and recalibration, extending the rack operations before return to earth. -

INS3D - NUMERICAL SOLUTION OF THE INCOMPRESSIBLE NAVIER-STOKES EQUATIONS IN THREE-DIMENSIONAL GENERALIZED CURVILINEAR COORDINATES (DEC RISC ULTRIX VERSION)

NASA Technical Reports Server (NTRS)

Biyabani, S. R.

1994-01-01

INS3D computes steady-state solutions to the incompressible Navier-Stokes equations. The INS3D approach utilizes pseudo-compressibility combined with an approximate factorization scheme. This computational fluid dynamics (CFD) code has been verified on problems such as flow through a channel, flow over a backwardfacing step and flow over a circular cylinder. Three dimensional cases include flow over an ogive cylinder, flow through a rectangular duct, wind tunnel inlet flow, cylinder-wall juncture flow and flow through multiple posts mounted between two plates. INS3D uses a pseudo-compressibility approach in which a time derivative of pressure is added to the continuity equation, which together with the momentum equations form a set of four equations with pressure and velocity as the dependent variables. The equations' coordinates are transformed for general three dimensional applications. The equations are advanced in time by the implicit, non-iterative, approximately-factored, finite-difference scheme of Beam and Warming. The numerical stability of the scheme depends on the use of higher-order smoothing terms to damp out higher-frequency oscillations caused by second-order central differencing. The artificial compressibility introduces pressure (sound) waves of finite speed (whereas the speed of sound would be infinite in an incompressible fluid). As the solution converges, these pressure waves die out, causing the derivation of pressure with respect to time to approach zero. Thus, continuity is satisfied for the incompressible fluid in the steady state. Computational efficiency is achieved using a diagonal algorithm. A block tri-diagonal option is also available. When a steady-state solution is reached, the modified continuity equation will satisfy the divergence-free velocity field condition. INS3D is capable of handling several different types of boundaries encountered in numerical simulations, including solid-surface, inflow and outflow, and far-field boundaries. Three machine versions of INS3D are available. INS3D for the CRAY is written in CRAY FORTRAN for execution on a CRAY X-MP under COS, INS3D for the IBM is written in FORTRAN 77 for execution on an IBM 3090 under the VM or MVS operating system, and INS3D for DEC RISC-based systems is written in RISC FORTRAN for execution on a DEC workstation running RISC ULTRIX 3.1 or later. The CRAY version has a central memory requirement of 730279 words. The central memory requirement for the IBM is 150Mb. The memory requirement for the DEC RISC ULTRIX version is 3Mb of main memory. INS3D was developed in 1987. The port to the IBM was done in 1990. The port to the DECstation 3100 was done in 1991. CRAY is a registered trademark of Cray Research Inc. IBM is a registered trademark of International Business Machines. DEC, DECstation, and ULTRIX are trademarks of the Digital Equipment Corporation.

INS3D - NUMERICAL SOLUTION OF THE INCOMPRESSIBLE NAVIER-STOKES EQUATIONS IN THREE-DIMENSIONAL GENERALIZED CURVILINEAR COORDINATES (CRAY VERSION)

NASA Technical Reports Server (NTRS)

Rogers, S. E.

1994-01-01

INS3D computes steady-state solutions to the incompressible Navier-Stokes equations. The INS3D approach utilizes pseudo-compressibility combined with an approximate factorization scheme. This computational fluid dynamics (CFD) code has been verified on problems such as flow through a channel, flow over a backwardfacing step and flow over a circular cylinder. Three dimensional cases include flow over an ogive cylinder, flow through a rectangular duct, wind tunnel inlet flow, cylinder-wall juncture flow and flow through multiple posts mounted between two plates. INS3D uses a pseudo-compressibility approach in which a time derivative of pressure is added to the continuity equation, which together with the momentum equations form a set of four equations with pressure and velocity as the dependent variables. The equations' coordinates are transformed for general three dimensional applications. The equations are advanced in time by the implicit, non-iterative, approximately-factored, finite-difference scheme of Beam and Warming. The numerical stability of the scheme depends on the use of higher-order smoothing terms to damp out higher-frequency oscillations caused by second-order central differencing. The artificial compressibility introduces pressure (sound) waves of finite speed (whereas the speed of sound would be infinite in an incompressible fluid). As the solution converges, these pressure waves die out, causing the derivation of pressure with respect to time to approach zero. Thus, continuity is satisfied for the incompressible fluid in the steady state. Computational efficiency is achieved using a diagonal algorithm. A block tri-diagonal option is also available. When a steady-state solution is reached, the modified continuity equation will satisfy the divergence-free velocity field condition. INS3D is capable of handling several different types of boundaries encountered in numerical simulations, including solid-surface, inflow and outflow, and far-field boundaries. Three machine versions of INS3D are available. INS3D for the CRAY is written in CRAY FORTRAN for execution on a CRAY X-MP under COS, INS3D for the IBM is written in FORTRAN 77 for execution on an IBM 3090 under the VM or MVS operating system, and INS3D for DEC RISC-based systems is written in RISC FORTRAN for execution on a DEC workstation running RISC ULTRIX 3.1 or later. The CRAY version has a central memory requirement of 730279 words. The central memory requirement for the IBM is 150Mb. The memory requirement for the DEC RISC ULTRIX version is 3Mb of main memory. INS3D was developed in 1987. The port to the IBM was done in 1990. The port to the DECstation 3100 was done in 1991. CRAY is a registered trademark of Cray Research Inc. IBM is a registered trademark of International Business Machines. DEC, DECstation, and ULTRIX are trademarks of the Digital Equipment Corporation.

Auroral oval kinematics program

NASA Technical Reports Server (NTRS)

Comfort, R. H.

1972-01-01

A computer program which determines the geographic location of the auroral oval for given universal time and level of geomagnetic activity was developed for use on the IBM 7094 computer. The program provides both printed output of geographic coordinates of auroral oval boundaries and polar plots of the auroral oval. In addition, there is available a time-integration option which indicates how long a given location is under the auroral oval during a specified period. A description is given of the program and its use.

Nesting large-eddy simulations within mesoscale simulations for wind energy applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lundquist, J K; Mirocha, J D; Chow, F K

2008-09-08

With increasing demand for more accurate atmospheric simulations for wind turbine micrositing, for operational wind power forecasting, and for more reliable turbine design, simulations of atmospheric flow with resolution of tens of meters or higher are required. These time-dependent large-eddy simulations (LES), which resolve individual atmospheric eddies on length scales smaller than turbine blades and account for complex terrain, are possible with a range of commercial and open-source software, including the Weather Research and Forecasting (WRF) model. In addition to 'local' sources of turbulence within an LES domain, changing weather conditions outside the domain can also affect flow, suggesting thatmore » a mesoscale model provide boundary conditions to the large-eddy simulations. Nesting a large-eddy simulation within a mesoscale model requires nuanced representations of turbulence. Our group has improved the Weather and Research Forecasting model's (WRF) LES capability by implementing the Nonlinear Backscatter and Anisotropy (NBA) subfilter stress model following Kosovic (1997) and an explicit filtering and reconstruction technique to compute the Resolvable Subfilter-Scale (RSFS) stresses (following Chow et al, 2005). We have also implemented an immersed boundary method (IBM) in WRF to accommodate complex terrain. These new models improve WRF's LES capabilities over complex terrain and in stable atmospheric conditions. We demonstrate approaches to nesting LES within a mesoscale simulation for farms of wind turbines in hilly regions. Results are sensitive to the nesting method, indicating that care must be taken to provide appropriate boundary conditions, and to allow adequate spin-up of turbulence in the LES domain.« less

Artifact-Based Transformation of IBM Global Financing

NASA Astrophysics Data System (ADS)

Chao, Tian; Cohn, David; Flatgard, Adrian; Hahn, Sandy; Linehan, Mark; Nandi, Prabir; Nigam, Anil; Pinel, Florian; Vergo, John; Wu, Frederick Y.

IBM Global Financing (IGF) is transforming its business using the Business Artifact Method, an innovative business process modeling technique that identifies key business artifacts and traces their life cycles as they are processed by the business. IGF is a complex, global business operation with many business design challenges. The Business Artifact Method is a fundamental shift in how to conceptualize, design and implement business operations. The Business Artifact Method was extended to solve the problem of designing a global standard for a complex, end-to-end process while supporting local geographic variations. Prior to employing the Business Artifact method, process decomposition, Lean and Six Sigma methods were each employed on different parts of the financing operation. Although they provided critical input to the final operational model, they proved insufficient for designing a complete, integrated, standard operation. The artifact method resulted in a business operations model that was at the right level of granularity for the problem at hand. A fully functional rapid prototype was created early in the engagement, which facilitated an improved understanding of the redesigned operations model. The resulting business operations model is being used as the basis for all aspects of business transformation in IBM Global Financing.

Bill Lang's contributions to acoustics at the International Business Machines Corp. (IBM) and to IBM in general

NASA Astrophysics Data System (ADS)

Nobile, Matthew A.; Chu, Richard C.

2005-09-01

Although Bill Lang's accomplishments and key roles in national and international standards and in the formation of INCE are widely recognized, sometimes it has to be remembered that for nearly 35 years he also had a ``day job'' at the IBM Corporation. His achievements at IBM were no less significant and enduring than those in external standards and professional societies. This paper will highlight some of the accomplishments and activities of Bill Lang as an IBM noise control engineer, the creator of the IBM Acoustics Lab in Poughkeepsie, the founder of the global Acoustics program at IBM, and his many other IBM leadership roles. Bill was also a long-serving IBM manager, with the full set of personnel issues to deal with, so his people-management skills were often called into play. Bill ended his long and fruitful IBM career at a high point. In 1988, he took an original idea of his to the top of IBM executive management, which led directly to the formation of the IBM Academy of Technology, today the preeminent body of IBM top technical leaders from around the world.

Conversion of Mass Storage Hierarchy in an IBM Computer Network

DTIC Science & Technology

1989-03-01

storage devices GUIDE IBM users’ group for DOS operating systems IBM International Business Machines IBM 370/145 CPU introduced in 1970 IBM 370/168 CPU...February 12, 1985, Information Systems Group, International Business Machines Corporation. "IBM 3090 Processor Complex" and 񓼪 Mass Storage System...34 Mainframe Journal, pp. 15-26, 64-65, Dallas, Texas, September-October 1987. 3. International Business Machines Corporation, Introduction to IBM 3S80 Storage

A weakly-compressible Cartesian grid approach for hydrodynamic flows

NASA Astrophysics Data System (ADS)

Bigay, P.; Oger, G.; Guilcher, P.-M.; Le Touzé, D.

2017-11-01

The present article aims at proposing an original strategy to solve hydrodynamic flows. In introduction, the motivations for this strategy are developed. It aims at modeling viscous and turbulent flows including complex moving geometries, while avoiding meshing constraints. The proposed approach relies on a weakly-compressible formulation of the Navier-Stokes equations. Unlike most hydrodynamic CFD (Computational Fluid Dynamics) solvers usually based on implicit incompressible formulations, a fully-explicit temporal scheme is used. A purely Cartesian grid is adopted for numerical accuracy and algorithmic simplicity purposes. This characteristic allows an easy use of Adaptive Mesh Refinement (AMR) methods embedded within a massively parallel framework. Geometries are automatically immersed within the Cartesian grid with an AMR compatible treatment. The method proposed uses an Immersed Boundary Method (IBM) adapted to the weakly-compressible formalism and imposed smoothly through a regularization function, which stands as another originality of this work. All these features have been implemented within an in-house solver based on this WCCH (Weakly-Compressible Cartesian Hydrodynamic) method which meets the above requirements whilst allowing the use of high-order (> 3) spatial schemes rarely used in existing hydrodynamic solvers. The details of this WCCH method are presented and validated in this article.

The web server of IBM's Bioinformatics and Pattern Discovery group: 2004 update

PubMed Central

Huynh, Tien; Rigoutsos, Isidore

2004-01-01

In this report, we provide an update on the services and content which are available on the web server of IBM's Bioinformatics and Pattern Discovery group. The server, which is operational around the clock, provides access to a large number of methods that have been developed and published by the group's members. There is an increasing number of problems that these tools can help tackle; these problems range from the discovery of patterns in streams of events and the computation of multiple sequence alignments, to the discovery of genes in nucleic acid sequences, the identification—directly from sequence—of structural deviations from α-helicity and the annotation of amino acid sequences for antimicrobial activity. Additionally, annotations for more than 130 archaeal, bacterial, eukaryotic and viral genomes are now available on-line and can be searched interactively. The tools and code bundles continue to be accessible from http://cbcsrv.watson.ibm.com/Tspd.html whereas the genomics annotations are available at http://cbcsrv.watson.ibm.com/Annotations/. PMID:15215340

The web server of IBM's Bioinformatics and Pattern Discovery group: 2004 update.

PubMed

Huynh, Tien; Rigoutsos, Isidore

2004-07-01

In this report, we provide an update on the services and content which are available on the web server of IBM's Bioinformatics and Pattern Discovery group. The server, which is operational around the clock, provides access to a large number of methods that have been developed and published by the group's members. There is an increasing number of problems that these tools can help tackle; these problems range from the discovery of patterns in streams of events and the computation of multiple sequence alignments, to the discovery of genes in nucleic acid sequences, the identification--directly from sequence--of structural deviations from alpha-helicity and the annotation of amino acid sequences for antimicrobial activity. Additionally, annotations for more than 130 archaeal, bacterial, eukaryotic and viral genomes are now available on-line and can be searched interactively. The tools and code bundles continue to be accessible from http://cbcsrv.watson.ibm.com/Tspd.html whereas the genomics annotations are available at http://cbcsrv.watson.ibm.com/Annotations/.

SRGULL - AN ADVANCED ENGINEERING MODEL FOR THE PREDICTION OF AIRFRAME INTEGRATED SCRAMJET CYCLE PERFORMANCE

NASA Technical Reports Server (NTRS)

Walton, J. T.

1994-01-01

The development of a single-stage-to-orbit aerospace vehicle intended to be launched horizontally into low Earth orbit, such as the National Aero-Space Plane (NASP), has concentrated on the use of the supersonic combustion ramjet (scramjet) propulsion cycle. SRGULL, a scramjet cycle analysis code, is an engineer's tool capable of nose-to-tail, hydrogen-fueled, airframe-integrated scramjet simulation in a real gas flow with equilibrium thermodynamic properties. This program facilitates initial estimates of scramjet cycle performance by linking a two-dimensional forebody, inlet and nozzle code with a one-dimensional combustor code. Five computer codes (SCRAM, SEAGUL, INLET, Progam HUD, and GASH) originally developed at NASA Langley Research Center in support of hypersonic technology are integrated in this program to analyze changing flow conditions. The one-dimensional combustor code is based on the combustor subroutine from SCRAM and the two-dimensional coding is based on an inviscid Euler program (SEAGUL). Kinetic energy efficiency input for sidewall area variation modeling can be calculated by the INLET program code. At the completion of inviscid component analysis, Program HUD, an integral boundary layer code based on the Spaulding-Chi method, is applied to determine the friction coefficient which is then used in a modified Reynolds Analogy to calculate heat transfer. Real gas flow properties such as flow composition, enthalpy, entropy, and density are calculated by the subroutine GASH. Combustor input conditions are taken from one-dimensionalizing the two-dimensional inlet exit flow. The SEAGUL portions of this program are limited to supersonic flows, but the combustor (SCRAM) section can handle supersonic and dual-mode operation. SRGULL has been compared to scramjet engine tests with excellent results. SRGULL was written in FORTRAN 77 on an IBM PC compatible using IBM's FORTRAN/2 or Microway's NDP386 F77 compiler. The program is fully user interactive, but can also run in batch mode. It operates under the UNIX, VMS, NOS, and DOS operating systems. The source code is not directly compatible with all PC compilers (e.g., Lahey or Microsoft FORTRAN) due to block and segment size requirements. SRGULL executable code requires about 490K RAM and a math coprocessor on PC's. The SRGULL program was developed in 1989, although the component programs originated in the 1960's and 1970's. IBM, IBM PC, and DOS are registered trademarks of International Business Machines. VMS is a registered trademark of Digital Equipment Corporation. UNIX is a registered trademark of Bell Laboratories. NOS is a registered trademark of Control Data Corporation.

Imprinted-like biopolymeric micelles as efficient nanovehicles for curcumin delivery.

PubMed

Zhang, Lili; Qi, Zeyou; Huang, Qiyu; Zeng, Ke; Sun, Xiaoyi; Li, Juan; Liu, You-Nian

2014-11-01

To enhance the solubility and improve the bioavailability of hydrophobic curcumin, a new kind of imprinted-like biopolymeric micelles (IBMs) was designed. The IBMs were prepared via co-assembly of gelatin-dextran conjugates with hydrophilic tea polyphenol, then crosslinking the assembled micelles and finally removing the template tea polyphenol by dialysis. The obtained IBMs show selective binding for polyphenol analogous drugs over other drugs. Furthermore, curcumin can be effectively encapsulated into the IBMs with 5×10(4)-fold enhancement of aqueous solubility. We observed the sustained drug release behavior from the curcumin-loaded IBMs (CUR@IBMs) in typical biological buffers. In addition, we found the cell uptake of CUR@IBMs is much higher than that of free curcumin. The cell cytotoxicity results illustrated that CUR@IBMs can improve the growth inhibition of HeLa cells compared with free curcumin, while the blank IBMs have little cytotoxicity. The in vivo animal study demonstrated that the IBMs could significantly improve the oral bioavailability of curcumin. Copyright © 2014 Elsevier B.V. All rights reserved.

Engraftment Efficiency after Intra-Bone Marrow versus Intravenous Transplantation of Bone Marrow Cells in a Canine Nonmyeloablative Dog Leukocyte Antigen-Identical Transplantation Model.

PubMed

Lange, Sandra; Steder, Anne; Killian, Doreen; Knuebel, Gudrun; Sekora, Anett; Vogel, Heike; Lindner, Iris; Dunkelmann, Simone; Prall, Friedrich; Murua Escobar, Hugo; Freund, Mathias; Junghanss, Christian

2017-02-01

An intra-bone marrow (IBM) hematopoietic stem cell transplantation (HSCT) is assumed to optimize the homing process and therefore to improve engraftment as well as hematopoietic recovery compared with conventional i.v. HSCT. This study investigated the feasibility and efficacy of IBM HSCT after nonmyeloablative conditioning in an allogeneic canine HSCT model. Two study cohorts received IBM HSCT of either density gradient (IBM-I, n = 7) or buffy coat (IBM-II, n = 6) enriched bone marrow cells. An historical i.v. HSCT cohort served as control. Before allogeneic HSCT experiments were performed, we investigated the feasibility of IBM HSCT by using technetium-99m marked autologous grafts. Scintigraphic analyses confirmed that most IBM-injected autologous cells remained at the injection sites, independent of the applied volume. In addition, cell migration to other bones occurred. The enrichment process led to different allogeneic graft volumes (IBM-I, 2 × 5 mL; IBM-II, 2 × 25 mL) and significantly lower counts of total nucleated cells in IBM-I grafts compared with IBM-II grafts (1.6 × 10 8 /kg versus 3.8 × 10 8 /kg). After allogeneic HSCT, dogs of the IBM-I group showed a delayed engraftment with lower levels of donor chimerism when compared with IBM-II or to i.v. HSCT. Dogs of the IBM-II group tended to reveal slightly faster early leukocyte engraftment kinetics than intravenously transplanted animals. However, thrombocytopenia was significantly prolonged in both IBM groups when compared with i.v. HSCT. In conclusion, IBM HSCT is feasible in a nonmyeloablative HSCT setting but failed to significantly improve engraftment kinetics and hematopoietic recovery in comparison with conventional i.v. HSCT. Copyright © 2017 The American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.

Aberration correction results in the IBM STEM instrument.

PubMed

Batson, P E

2003-09-01

Results from the installation of aberration correction in the IBM 120 kV STEM argue that a sub-angstrom probe size has been achieved. Results and the experimental methods used to obtain them are described here. Some post-experiment processing is necessary to demonstrate the probe size of about 0.078 nm. While the promise of aberration correction is demonstrated, we remain at the very threshold of practicality, given the very stringent stability requirements.

CD-ROM source data uploaded to the operating and storage devices of an IBM 3090 mainframe through a PC terminal.

PubMed

Boros, L G; Lepow, C; Ruland, F; Starbuck, V; Jones, S; Flancbaum, L; Townsend, M C

1992-07-01

A powerful method of processing MEDLINE and CINAHL source data uploaded to the IBM 3090 mainframe computer through an IBM/PC is described. Data are first downloaded from the CD-ROM's PC devices to floppy disks. These disks then are uploaded to the mainframe computer through an IBM/PC equipped with WordPerfect text editor and computer network connection (SONNGATE). Before downloading, keywords specifying the information to be accessed are typed at the FIND prompt of the CD-ROM station. The resulting abstracts are downloaded into a file called DOWNLOAD.DOC. The floppy disks containing the information are simply carried to an IBM/PC which has a terminal emulation (TELNET) connection to the university-wide computer network (SONNET) at the Ohio State University Academic Computing Services (OSU ACS). The WordPerfect (5.1) processes and saves the text into DOS format. Using the File Transfer Protocol (FTP, 130,000 bytes/s) of SONNET, the entire text containing the information obtained through the MEDLINE and CINAHL search is transferred to the remote mainframe computer for further processing. At this point, abstracts in the specified area are ready for immediate access and multiple retrieval by any PC having network switch or dial-in connection after the USER ID, PASSWORD and ACCOUNT NUMBER are specified by the user. The system provides the user an on-line, very powerful and quick method of searching for words specifying: diseases, agents, experimental methods, animals, authors, and journals in the research area downloaded. The user can also copy the TItles, AUthors and SOurce with optional parts of abstracts into papers under edition. This arrangement serves the special demands of a research laboratory by handling MEDLINE and CINAHL source data resulting after a search is performed with keywords specified for ongoing projects. Since the Ohio State University has a centrally founded mainframe system, the data upload, storage and mainframe operations are free.

Ada (Trade Name) Compiler Validation Summary Report: International Business Machines Corporation. IBM Development System for the Ada Language System, Version 1.1.0, IBM 4381 under VM/SP CMS Host, IBM 4381 under MVS Target

DTIC Science & Technology

1988-05-20

AVF Control Number: AVF-VSR-84.1087 ’S (0 87-03-10-TEL I- Ada® COMPILER VALIDATION SUMMARY REPORT: International Business Machines Corporation IBM...System, Version 1.1.0, International Business Machines Corporation, Wright-Patterson AFB. IBM 4381 under VM/SP CMS, Release 3.6 (host) and IBM 4381...an IBM 4381 operating under MVS, Release 3.8. On-site testing was performed 18 May 1987 through 20 May 1987 at International Business Machines

Ada Compiler Validation Summary Report: Certificate Number: 880318W1. 09043 International Business Machines Corporation IBM Development System for the Ada Language, Version 2.1.0 IBM 4381 under VM/HPO, Host IBM 4381 under MVS/XA, Target

DTIC Science & Technology

1988-03-28

International Business Machines Corporation IBM Development System for the Ada Language, Version 2.1.0 IBM 4381 under VM/HPO, host IBM 4381 under MVS/XA, target...Program Office, AJPO 20. ABSTRACT (Continue on reverse side if necessary and identify by block number) International Business Machines Corporation, IBM...Standard ANSI/MIL-STD-1815A in the compiler listed in this declaration. I declare that International Business Machines Corporation is the owner of record

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sudman, D.L.

For 17 years, the sensor-based IBM 1800 computer successfully fulfilled Sun's requirements for data acquisition and process control at its petroleum refinery in Toledo, Ohio. However, faltering reliability due to deterioration, coupled with IBM's announced withdrawal of contractual hardware maintenance, prompted Sun to approach IBM regarding potential solutions to the problem of economically maintaining the IBM 1800 as a viable system in the Toledo Refinery. In concert, IBM and Sun identified several options, but an IBM proposal which held the most promise for long term success was the direct replacement of the IBM 1800 processor and software systems with anmore » IBM 4300 running IBM's licensed program product ''Advanced Control System,'' i.e., ACS. Sun chose this solution. The intent of this paper is to chronicle the highlights of the project which successfully revitalized the process computer facilities in Sun's Toledo Refinery in only 10 months, under financial constraints, and using limited human resources.« less

LEOPARD; SPOTS; sjectrum calculation with depletion. [IBM360; UNIVAC1108; FORTRAN IV(H) (IBM360) and FORTRAN V (UNIVAC1108)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barry, R.F.

LEOPARD is a unit cell homogenization and spectrum generation (MUFT-SOFOCATE type) program with a fuel depletion option.IBM360;UNIVAC1108; FORTRAN IV(H) (IBM360) and FORTRAN V (UNIVAC1108); OS/360 (IBM360) and EXEC2 (UNIVAC1108); 50K (decimal) memory.

Parallel Semi-Implicit Spectral Element Atmospheric Model

NASA Astrophysics Data System (ADS)

Fournier, A.; Thomas, S.; Loft, R.

2001-05-01

The shallow-water equations (SWE) have long been used to test atmospheric-modeling numerical methods. The SWE contain essential wave-propagation and nonlinear effects of more complete models. We present a semi-implicit (SI) improvement of the Spectral Element Atmospheric Model to solve the SWE (SEAM, Taylor et al. 1997, Fournier et al. 2000, Thomas & Loft 2000). SE methods are h-p finite element methods combining the geometric flexibility of size-h finite elements with the accuracy of degree-p spectral methods. Our work suggests that exceptional parallel-computation performance is achievable by a General-Circulation-Model (GCM) dynamical core, even at modest climate-simulation resolutions (>1o). The code derivation involves weak variational formulation of the SWE, Gauss(-Lobatto) quadrature over the collocation points, and Legendre cardinal interpolators. Appropriate weak variation yields a symmetric positive-definite Helmholtz operator. To meet the Ladyzhenskaya-Babuska-Brezzi inf-sup condition and avoid spurious modes, we use a staggered grid. The SI scheme combines leapfrog and Crank-Nicholson schemes for the nonlinear and linear terms respectively. The localization of operations to elements ideally fits the method to cache-based microprocessor computer architectures --derivatives are computed as collections of small (8x8), naturally cache-blocked matrix-vector products. SEAM also has desirable boundary-exchange communication, like finite-difference models. Timings on on the IBM SP and Compaq ES40 supercomputers indicate that the SI code (20-min timestep) requires 1/3 the CPU time of the explicit code (2-min timestep) for T42 resolutions. Both codes scale nearly linearly out to 400 processors. We achieved single-processor performance up to 30% of peak for both codes on the 375-MHz IBM Power-3 processors. Fast computation and linear scaling lead to a useful climate-simulation dycore only if enough model time is computed per unit wall-clock time. An efficient SI solver is essential to substantially increase this rate. Parallel preconditioning for an iterative conjugate-gradient elliptic solver is described. We are building a GCM dycore capable of 200 GF% lOPS sustained performance on clustered RISC/cache architectures using hybrid MPI/OpenMP programming.

Corporate Mortality Files and Late Industrial Necropolitics.

PubMed

Little, Peter C

2017-10-05

This article critically examines the corporate production, archival politics, and socio-legal dimensions of corporate mortality files (CMFs), the largest corporate archive developed by IBM to systematically document industrial exposures and occupational health outcomes for electronics workers. I first provide a history of IBM's CMF project, which amounts to a comprehensive mortality record for IBM employees over the past 40 years. Next, I explore a recent case in Endicott, New York, birthplace of IBM, where the U.S. National Institute for Occupational Safety and Health studied IBM's CMFs for workers at IBM's former Endicott plant. Tracking the production of the IBM CMF, the strategic avoidance of this source of big data as evidence for determining a recent legal settlement, alongside local critiques of the IBM CMF project, the article develops what I call "late industrial necropolitics." © 2017 by the American Anthropological Association.

Comparative utility of LC3, p62 and TDP-43 immunohistochemistry in differentiation of inclusion body myositis from polymyositis and related inflammatory myopathies.

PubMed

Hiniker, Annie; Daniels, Brianne H; Lee, Han S; Margeta, Marta

2013-07-01

Inclusion body myositis (IBM) is a slowly progressive inflammatory myopathy of the elderly that does not show significant clinical improvement in response to steroid therapy. Distinguishing IBM from polymyositis (PM) is clinically important since PM is steroid-responsive; however, the two conditions can show substantial histologic overlap. We performed quantitative immunohistochemistry for (1) autophagic markers LC3 and p62 and (2) protein aggregation marker TDP-43 in 53 subjects with pathologically diagnosed PM, IBM, and two intermediate T cell-mediated inflammatory myopathies (polymyositis with COX-negative fibers and possible IBM). The percentage of stained fibers was significantly higher in IBM than PM for all three immunostains, but the markers varied in sensitivity and specificity. In particular, both LC3 and p62 were sensitive markers of IBM, but the tradeoff between sensitivity and specificity was smaller (and diagnostic utility thus greater) for LC3 than for p62. In contrast, TDP-43 immunopositivity was highly specific for IBM, but the sensitivity of this test was low, with definitive staining present in just 67% of IBM cases. To differentiate IBM from PM, we thus recommend using a panel of LC3 and TDP-43 antibodies: the finding of <14% LC3-positive fibers helps exclude IBM, while >7% of TDP-43-positive fibers strongly supports a diagnosis of IBM. These data provide support for the hypothesis that disruption of autophagy and protein aggregation contribute to IBM pathogenesis.

An Interactive Software for Conceptual Wing Flutter Analysis and Parametric Study

NASA Technical Reports Server (NTRS)

Mukhopadhyay, Vivek

1996-01-01

An interactive computer program was developed for wing flutter analysis in the conceptual design stage. The objective was to estimate the flutter instability boundary of a flexible cantilever wing, when well-defined structural and aerodynamic data are not available, and then study the effect of change in Mach number, dynamic pressure, torsional frequency, sweep, mass ratio, aspect ratio, taper ratio, center of gravity, and pitch inertia, to guide the development of the concept. The software was developed for Macintosh or IBM compatible personal computers, on MathCad application software with integrated documentation, graphics, data base and symbolic mathematics. The analysis method was based on non-dimensional parametric plots of two primary flutter parameters, namely Regier number and Flutter number, with normalization factors based on torsional stiffness, sweep, mass ratio, taper ratio, aspect ratio, center of gravity location and pitch inertia radius of gyration. The parametric plots were compiled in a Vought Corporation report from a vast data base of past experiments and wind-tunnel tests. The computer program was utilized for flutter analysis of the outer wing of a Blended-Wing-Body concept, proposed by McDonnell Douglas Corp. Using a set of assumed data, preliminary flutter boundary and flutter dynamic pressure variation with altitude, Mach number and torsional stiffness were determined.

Ada (Trade Name) Compiler Validation Summary Report: International Business Machines Corporation. IBM Development System for the Ada Language System, Version 1.1.0, IBM 4381 under MVS.

DTIC Science & Technology

1988-05-22

TITLE (andSubtile) 5. TYPE OF REPORT & PERIOD COVERED Ada Compler Validation Summary Report: 22 May 1987 to 22 May 1988 International Business Machines...IBM Development System for the Ada Language System, Version 1.1.0, International Business Machines Corporation, Wright-Patterson AFB. IBM 4381 under...SUMMARY REPORT: International Business Machines Corporation IBM Development System f’or the Ada Language System, Version 1.1.0 IBM 4381 under MVS

Ada (Tradename) Compiler Validation Summary Report. International Business Machines Corporation. IBM Development System for the Ada Language for VM/CMS, Version 1.0. IBM 4381 (IBM System/370) under VM/CMS.

DTIC Science & Technology

1986-04-29

COMPILER VALIDATION SUMMARY REPORT: International Business Machines Corporation IBM Development System for the Ada Language for VM/CMS, Version 1.0 IBM 4381...tested using command scripts provided by International Business Machines Corporation. These scripts were reviewed by the validation team. Test.s were run...s): IBM 4381 (System/370) Operating System: VM/CMS, release 3.6 International Business Machines Corporation has made no deliberate extensions to the

Effect of Maximal Apnoea Easy-Going and Struggle Phases on Subarachnoid Width and Pial Artery Pulsation in Elite Breath-Hold Divers.

PubMed

Winklewski, Pawel J; Barak, Otto; Madden, Dennis; Gruszecka, Agnieszka; Gruszecki, Marcin; Guminski, Wojciech; Kot, Jacek; Frydrychowski, Andrzej F; Drvis, Ivan; Dujic, Zeljko

2015-01-01

The aim of the study was to assess changes in subarachnoid space width (sas-TQ), the marker of intracranial pressure (ICP), pial artery pulsation (cc-TQ) and cardiac contribution to blood pressure (BP), cerebral blood flow velocity (CBFV) and cc-TQ oscillations throughout the maximal breath hold in elite apnoea divers. Non-invasive assessment of sas-TQ and cc-TQ became possible due to recently developed method based on infrared radiation, called near-infrared transillumination/backscattering sounding (NIR-T/BSS). The experimental group consisted of seven breath-hold divers (six men). During testing, each participant performed a single maximal end-inspiratory breath hold. Apnoea consisted of the easy-going and struggle phases (characterised by involuntary breathing movements (IBMs)). Heart rate (HR) was determined using a standard ECG. BP was assessed using the photoplethysmography method. SaO2 was monitored continuously with pulse oximetry. A pneumatic chest belt was used to register thoracic and abdominal movements. Cerebral blood flow velocity (CBFV) was estimated by a 2-MHz transcranial Doppler ultrasonic probe. sas-TQ and cc-TQ were measured using NIR-T/BSS. Wavelet transform analysis was performed to assess cardiac contribution to BP, CBFV and cc-TQ oscillations. Mean BP and CBFV increased compared to baseline at the end of the easy phase and were further augmented by IBMs. cc-TQ increased compared to baseline at the end of the easy phase and remained stable during the IBMs. HR did not change significantly throughout the apnoea, although a trend toward a decrease during the easy phase and recovery during the IBMs was visible. Amplitudes of BP, CBFV and cc-TQ were augmented. sas-TQ and SaO2 decreased at the easy phase of apnoea and further decreased during the IBMs. Apnoea increases intracranial pressure and pial artery pulsation. Pial artery pulsation seems to be stabilised by the IBMs. Cardiac contribution to BP, CBFV and cc-TQ oscillations does not change throughout the apnoea.

Comparative utility of LC3, p62 and TDP-43 immunohistochemistry in differentiation of inclusion body myositis from polymyositis and related inflammatory myopathies

PubMed Central

2013-01-01

Background Inclusion body myositis (IBM) is a slowly progressive inflammatory myopathy of the elderly that does not show significant clinical improvement in response to steroid therapy. Distinguishing IBM from polymyositis (PM) is clinically important since PM is steroid-responsive; however, the two conditions can show substantial histologic overlap. Results We performed quantitative immunohistochemistry for (1) autophagic markers LC3 and p62 and (2) protein aggregation marker TDP-43 in 53 subjects with pathologically diagnosed PM, IBM, and two intermediate T cell-mediated inflammatory myopathies (polymyositis with COX-negative fibers and possible IBM). The percentage of stained fibers was significantly higher in IBM than PM for all three immunostains, but the markers varied in sensitivity and specificity. In particular, both LC3 and p62 were sensitive markers of IBM, but the tradeoff between sensitivity and specificity was smaller (and diagnostic utility thus greater) for LC3 than for p62. In contrast, TDP-43 immunopositivity was highly specific for IBM, but the sensitivity of this test was low, with definitive staining present in just 67% of IBM cases. Conclusions To differentiate IBM from PM, we thus recommend using a panel of LC3 and TDP-43 antibodies: the finding of <14% LC3-positive fibers helps exclude IBM, while >7% of TDP-43-positive fibers strongly supports a diagnosis of IBM. These data provide support for the hypothesis that disruption of autophagy and protein aggregation contribute to IBM pathogenesis. PMID:24252466

Large Eddy Simulation of Transitional Flow in an Idealized Stenotic Blood Vessel: Evaluation of Subgrid Scale Models

PubMed Central

Pal, Abhro; Anupindi, Kameswararao; Delorme, Yann; Ghaisas, Niranjan; Shetty, Dinesh A.; Frankel, Steven H.

2014-01-01

In the present study, we performed large eddy simulation (LES) of axisymmetric, and 75% stenosed, eccentric arterial models with steady inflow conditions at a Reynolds number of 1000. The results obtained are compared with the direct numerical simulation (DNS) data (Varghese et al., 2007, “Direct Numerical Simulation of Stenotic Flows. Part 1. Steady Flow,” J. Fluid Mech., 582, pp. 253–280). An inhouse code (WenoHemo) employing high-order numerical methods for spatial and temporal terms, along with a 2nd order accurate ghost point immersed boundary method (IBM) (Mark, and Vanwachem, 2008, “Derivation and Validation of a Novel Implicit Second-Order Accurate Immersed Boundary Method,” J. Comput. Phys., 227(13), pp. 6660–6680) for enforcing boundary conditions on curved geometries is used for simulations. Three subgrid scale (SGS) models, namely, the classical Smagorinsky model (Smagorinsky, 1963, “General Circulation Experiments With the Primitive Equations,” Mon. Weather Rev., 91(10), pp. 99–164), recently developed Vreman model (Vreman, 2004, “An Eddy-Viscosity Subgrid-Scale Model for Turbulent Shear Flow: Algebraic Theory and Applications,” Phys. Fluids, 16(10), pp. 3670–3681), and the Sigma model (Nicoud et al., 2011, “Using Singular Values to Build a Subgrid-Scale Model for Large Eddy Simulations,” Phys. Fluids, 23(8), 085106) are evaluated in the present study. Evaluation of SGS models suggests that the classical constant coefficient Smagorinsky model gives best agreement with the DNS data, whereas the Vreman and Sigma models predict an early transition to turbulence in the poststenotic region. Supplementary simulations are performed using Open source field operation and manipulation (OpenFOAM) (“OpenFOAM,” http://www.openfoam.org/) solver and the results are inline with those obtained with WenoHemo. PMID:24801556

Deep Ensemble Learning for Monaural Speech Separation

DTIC Science & Technology

2015-02-01

cse.ohio- state.edu). typically predict the ideal binary mask (IBM) or ideal ratio mask ( IRM ). For the IBM [21], a T-F unit is assigned 1, if the signal...dominance. For the IRM [17], a T- F unit is assigned some ratio of target energy and mixture energy. Kim et al. [15] used Gaussian mixture models (GMM...significantly outperforms earlier separation methods. Subsequently, Wang et al. [23] examined a number of training targets and suggested that the IRM should be

Mortality and Causes of Death in Patients with Sporadic Inclusion Body Myositis: Survey Study Based on the Clinical Experience of Specialists in Australia, Europe and the USA

PubMed Central

Price, Mark A.; Barghout, Victoria; Benveniste, Olivier; Christopher-Stine, Lisa; Corbett, Alastair; de Visser, Marianne; Hilton-Jones, David; Kissel, John T.; Lloyd, Thomas E.; Lundberg, Ingrid E.; Mastaglia, Francis; Mozaffar, Tahseen; Needham, Merrilee; Schmidt, Jens; Sivakumar, Kumaraswamy; DeMuro, Carla; Tseng, Brian S.

2016-01-01

Background: There is a paucity of data on mortality and causes of death (CoDs) in patients with sporadic inclusion body myositis (sIBM), a rare, progressive, degenerative, inflammatory myopathy that typically affects those aged over 50 years. Objective: Based on patient records and expertise of clinical specialists, this study used questionnaires to evaluate physicians’ views on clinical characteristics of sIBM that may impact on premature mortality and CoDs in these patients. Methods: Thirteen physicians from seven countries completed two questionnaires online between December 20, 2012 and January 15, 2013. Responses to the first questionnaire were collated and presented in the second questionnaire to seek elaboration and identify consensus. Results: All 13 physicians completed both questionnaires, providing responses based on 585 living and 149 deceased patients under their care. Patients were reported to have experienced dysphagia (60.2%) and injurious falls (44.3%) during their disease. Over half of physicians reported that a subset of their patients with sIBM had a shortened lifespan (8/13), and agreed that bulbar dysfunction/dysphagia/oropharyngeal involvement (12/13), early-onset disease (8/13), severe symptoms (8/13), and falls (7/13) impacted lifespan. Factors related to sIBM were reported as CoDs in 40% of deceased patients. Oropharyngeal muscle dysfunction was ranked as the leading feature of sIBM that could contribute to death. The risk of premature mortality was higher than the age-matched comparison population. Conclusions: In the absence of data from traditional sources, this study suggests that features of sIBM may contribute to premature mortality and may be used to inform future studies. PMID:27854208

FORTRAN 4 computer program for calculating critical speeds of rotating shafts

NASA Technical Reports Server (NTRS)

Trivisonno, R. J.

1973-01-01

A FORTRAN 4 computer program, written for the IBM DCS 7094/7044 computer, that calculates the critical speeds of rotating shafts is described. The shaft may include bearings, couplings, extra masses (nonshaft mass), and disks for the gyroscopic effect. Shear deflection is also taken into account, and provision is made in the program for sections of the shaft that are tapered. The boundary conditions at the ends of the shaft can be fixed (deflection and slope equal to zero) or free (shear and moment equal to zero). The fixed end condition enables the program to calculate the natural frequencies of cantilever beams. Instead of using the lumped-parameter method, the program uses continuous integration of the differential equations of beam flexure across different shaft sections. The advantages of this method over the usual lumped-parameter method are less data preparation and better approximation of the distribution of the mass of the shaft. A main feature of the program is the nature of the output. The Calcomp plotter is used to produce a drawing of the shaft with superimposed deflection curves at the critical speeds, together with all pertinent information related to the shaft.

IBM Application System/400 as the foundation of the Mayo Clinic/IBM PACS project

NASA Astrophysics Data System (ADS)

Rothman, Melvyn L.; Morin, Richard L.; Persons, Kenneth R.; Gibbons, Patricia S.

1990-08-01

An IBM Application System/400 (AS/400) anchors the Mayo Clinic/IBM joint development PACS project. This paper highlights some of the AS/400's features and the resulting benefits which make it a strong foundation for a medical image archival and review system. Among the AS/400's key features are: 1. A high-level machine architecture 2. Object orientation 3. Relational data base and other functions integrated into the system's architecture 4. High-function interfaces to IBM Personal Computers and IBM Personal System/2s' (pS/2TM).

Ada Compiler Validation Summary Report: Certificate Number: 880318W1. 09041, International Business Machines Corporation, IBM Development System for the Ada Language, Version 2.1.0, IBM 4381 under VM/HPO, Host and Target

DTIC Science & Technology

1988-03-28

International Business Machines Corporation IBM Development System for the Ada Language, Version 2.1.0 IBM 4381 under VM/HPO, host and target DTIC...necessary and identify by block number) International Business Machines Corporation, IBM Development System for the Ada Language, Version 2.1.0, IBM...in the compiler listed in this declaration. I declare that International Business Machines Corporation is the owner of record of the object code of the

Ada Compiler Validation Summary Report: Certificate Number 89020W1. 10073: International Business Machines Corporation, IBM Development System for the Ada Language, VM/CMS Ada Compiler, Version 2.1.1, IBM 3083 (Host and Target)

DTIC Science & Technology

1989-04-20

International Business Machines Corporation) IBM Development System for the Ada Language, VN11/CMS Ada Compiler, Version 2.1.1, Wright-Patterson AFB, IBM 3083...890420W1.10073 International Business Machines Corporation IBM Development System for the Ada Language VM/CMS Ada Compiler Version 2.1.1 IBM 3083... International Business Machines Corporation and reviewed by the validation team. The compiler was tested using all default option settings except for the

Ada Compiler Validation Summary Report: Certificate Number: 890420W1. 10075 International Business Machines Corporation. IBM Development System, for the Ada Language CMS/MVS Ada Cross Compiler, Version 2.1.1 IBM 3083 Host and IBM 4381 Target

DTIC Science & Technology

1989-04-20

International business Machines Corporati,:i IBM Development System for the Ada Language, CMS/MVS Ada Cross Compiler, Version 2.1.1, Wright-Patterson AFB, IBM...VALIDATION SUMMARY REPORT: Certificate Number: 890420W1.10075 International Business Machines Corporation IBM Development System for the Ada Language CMS...command scripts provided by International Business Machines Corporation and reviewed by the validation team. The compiler was tested using all default

ITER Plasma at Ion Cyclotron Frequency Domain: The Fusion Alpha Particles Diagnostics Based on the Stimulated Raman Scattering of Fast Magnetosonic Wave off High Harmonic Ion Bernstein Modes

NASA Astrophysics Data System (ADS)

Stefan, V. Alexander

2014-10-01

A novel method for alpha particle diagnostics is proposed. The theory of stimulated Raman scattering, SRS, of the fast wave and ion Bernstein mode, IBM, turbulence in multi-ion species plasmas, (Stefan University Press, La Jolla, CA, 2008). is utilized for the diagnostics of fast ions, (4)He (+2), in ITER plasmas. Nonlinear Landau damping of the IBM on fast ions near the plasma edge leads to the space-time changes in the turbulence level, (inverse alpha particle channeling). The space-time monitoring of the IBM turbulence via the SRS techniques may prove efficient for the real time study of the fast ion velocity distribution function, spatial distribution, and transport. Supported by Nikola Tesla Labs., La Jolla, CA 92037.

Increased aging in primary muscle cultures of sporadic inclusion-body myositis.

PubMed

Morosetti, Roberta; Broccolini, Aldobrando; Sancricca, Cristina; Gliubizzi, Carla; Gidaro, Teresa; Tonali, Pietro A; Ricci, Enzo; Mirabella, Massimiliano

2010-07-01

Ageing is thought to participate to the pathogenesis of sporadic inclusion-body myositis (s-IBM). Although the regenerative potential of s-IBM muscle is reduced in vivo, age-related abnormalities of satellite cells possibly accounting for the decline of muscle repair have not been demonstrated. Here we show that proliferation rate and clonogenicity of s-IBM myoblasts are significantly lower and doubling time is longer than normal age-matched controls, indicating that proliferative capacity of s-IBM muscles becomes exhausted earlier. Telomere shortening is detected in s-IBM cells suggesting premature senescence. Differently from controls, s-IBM myoblasts show increased active beta-catenin mainly localized within myonuclei, indicating active Wnt stimulation. After many rounds of muscle growth, only s-IBM myoblasts accumulate congophilic inclusions and immunoreactive Abeta(1-40) deposits. Therefore, s-IBM myoblasts seem to have a constitutively impaired regenerative capacity and the intrinsic property, upon sufficient aging in vitro, to accumulate Abeta. Our results might be valuable in understanding molecular mechanisms associated with muscle aging underlying the defective regeneration of s-IBM muscle and provide new clues for future therapeutic strategies. Copyright 2008 Elsevier Inc. All rights reserved.

Scalability study of parallel spatial direct numerical simulation code on IBM SP1 parallel supercomputer

NASA Technical Reports Server (NTRS)

Hanebutte, Ulf R.; Joslin, Ronald D.; Zubair, Mohammad

1994-01-01

The implementation and the performance of a parallel spatial direct numerical simulation (PSDNS) code are reported for the IBM SP1 supercomputer. The spatially evolving disturbances that are associated with laminar-to-turbulent in three-dimensional boundary-layer flows are computed with the PS-DNS code. By remapping the distributed data structure during the course of the calculation, optimized serial library routines can be utilized that substantially increase the computational performance. Although the remapping incurs a high communication penalty, the parallel efficiency of the code remains above 40% for all performed calculations. By using appropriate compile options and optimized library routines, the serial code achieves 52-56 Mflops on a single node of the SP1 (45% of theoretical peak performance). The actual performance of the PSDNS code on the SP1 is evaluated with a 'real world' simulation that consists of 1.7 million grid points. One time step of this simulation is calculated on eight nodes of the SP1 in the same time as required by a Cray Y/MP for the same simulation. The scalability information provides estimated computational costs that match the actual costs relative to changes in the number of grid points.

Ada (Tradename) Compiler Validation Summary Report. International Business Machines Corporation. IBM Development System for the Ada Language for MVS, Version 1.0. IBM 4381 (IBM System/370) under MVS.

DTIC Science & Technology

1986-05-05

AVF-VSR-36.0187 Ada" COMPILER VALIDATION SUMMARY REPORT: International Business Machines Corporation IBM Development System for the Ada Language for...withdrawn from ACVC Version 1.7 were not run. The compiler was tested using command scripts provided by International Business Machines Corporation. These...APPENDIX A COMPLIANCE STATEMENT International Business Machines Corporation has submitted the following compliance statement concerning the IBM

Flexstab on the IBM 360

NASA Technical Reports Server (NTRS)

Pyle, R. S.; Sykora, R. G.; Denman, S. C.

1976-01-01

FLEXSTAB, an array of computer programs developed on CDC equipment, has been converted to operate on the IBM 360 computation system. Instructions for installing, validating, and operating FLEXSTAB on the IBM 360 are included. Hardware requirements are itemized and supplemental materials describe JCL sequences, the CDC to IBM conversion, the input output subprograms, and the interprogram data flow.

Sleep disordered breathing in a cohort of patients with sporadic inclusion body myositis.

PubMed

Della Marca, Giacomo; Sancricca, Cristina; Losurdo, Anna; Di Blasi, Chiara; De Fino, Chiara; Morosetti, Roberta; Broccolini, Aldobrando; Testani, Elisa; Scarano, Emanuele; Servidei, Serenella; Mirabella, Massimiliano

2013-08-01

The aims of the study were: (1) to evaluate subjective sleep quality and daytime sleepiness in patients affected by sporadic inclusion-body myositis (IBM); (2) to define the sleep and sleep-related respiratory pattern in IBM patients. Thirteen consecutive adult patients affected by definite IBM were enrolled, six women and seven men, mean age 66.2 ± 11.1 years (range: 50-80). Diagnosis was based on clinical and muscle biopsy studies. All patients underwent subjective sleep evaluation (Pittsburgh Sleep Quality Index, PSQI and Epworth Sleepiness Scale, ESS), oro-pharingo-esophageal scintigraphy, pulmonary function tests, psychometric measures, anatomic evaluation of upper airways, and laboratory-based polysomnography. Findings in IBM patients were compared to those obtained from a control group of 25 healthy subjects (13 men and 12 women, mean age 61.9 ± 8.6 years). Disease duration was >10 years in all. Mean IBM severity score was 28.8 ± 5.4 (range 18-36). Dysphagia was present in 10 patients. Nine patients had PSQI scores ≥ 5; patients had higher mean PSQI score (IBM: 7.2 ± 4.7, CONTROLS: 2.76 ± 1.45, p=0.005); one patient (and no controls) had EES>9. Polysomnography showed that IBM patients, compared to controls, had lower sleep efficiency (IBM: 78.8 ± 12.0%, 94.0 ± 4.5%, p<0.001), more awakenings (IBM: 11.9 ± 11.0, CONTROLS: 5.2 ± 7.5, p=0.009) and increased nocturnal time awake (IBM: 121.2 ± 82.0 min., 46.12 ± 28.8 min., p=0.001). Seven Patients (and no controls) had polysomnographic findings consistent with sleep disordered breathing (SDB). Data suggest that sleep disruption, and in particular SDB, might be highly prevalent in IBM. Data indicate that IBM patients have poor sleep and high prevalence of SDB. Copyright © 2013 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

TWEAK in inclusion-body myositis muscle: possible pathogenic role of a cytokine inhibiting myogenesis.

PubMed

Morosetti, Roberta; Gliubizzi, Carla; Sancricca, Cristina; Broccolini, Aldobrando; Gidaro, Teresa; Lucchini, Matteo; Mirabella, Massimiliano

2012-04-01

Tumor necrosis factor-like weak inducer of apoptosis (TWEAK) and its receptor Fn14 exert pleiotropic effects, including regulation of myogenesis. Sporadic inclusion-body myositis (IBM) is the most common muscle disease of the elderly population and leads to severe disability. IBM mesoangioblasts, different from mesoangioblasts in other inflammatory myopathies, display a myogenic differentiation defect. The objective of the present study was to investigate TWEAK-Fn14 expression in IBM and other inflammatory myopathies and explore whether TWEAK modulation affects myogenesis in IBM mesoangioblasts. TWEAK, Fn14, and NF-κB expression was assessed by immunohistochemistry and Western blot in cell samples from both muscle biopsies and primary cultures. Mesoangioblasts isolated from samples of IBM, dermatomyositis, polymyositis, and control muscles were treated with recombinant human TWEAK, Fn14-Fc chimera, and anti-TWEAK antibody. TWEAK-RNA interference was performed in IBM and dermatomyositis mesoangioblasts. TWEAK levels in culture media were determined by enzyme-linked immunosorbent assay. In IBM muscle, we found increased TWEAK-Fn14 expression. Increased levels of TWEAK were found in differentiation medium from IBM mesoangioblasts. Moreover, TWEAK inhibited myogenic differentiation of mesoangioblasts. Consistent with this evidence, TWEAK inhibition by Fn14-Fc chimera or short interfering RNA induced myogenic differentiation of IBM mesoangioblasts. We provide evidence that TWEAK is a negative regulator of human mesoangioblast differentiation. Dysregulation of the TWEAK-Fn14 axis in IBM muscle may induce progressive muscle atrophy and reduce activation and differentiation of muscle precursor cells. Copyright © 2012 American Society for Investigative Pathology. Published by Elsevier Inc. All rights reserved.

Analysis of habitat-selection rules using an individual-based model

Treesearch

Steven F. Railsback; Bret C. Harvey

2002-01-01

Abstract - Despite their promise for simulating natural complexity,individual-based models (IBMs) are rarely used for ecological research or resource management. Few IBMs have been shown to reproduce realistic patterns of behavior by individual organisms.To test our IBM of stream salmonids and draw conclusions about foraging theory,we analyzed the IBM ’s ability to...

Update in inclusion body myositis

PubMed Central

Machado, Pedro; Brady, Stefen; Hanna, Michael G.

2013-01-01

Purpose of review The purpose of this study is to review recent scientific advances relating to the natural history, cause, treatment and serum and imaging biomarkers of inclusion body myositis (IBM). Recent findings Several theories regarding the aetiopathogenesis of IBM are being explored and new therapeutic approaches are being investigated. New diagnostic criteria have been proposed, reflecting the knowledge that the diagnostic pathological findings may be absent in patients with clinically typical IBM. The role of MRI in IBM is expanding and knowledge about pathological biomarkers is increasing. The recent description of autoantibodies to cytosolic 5′ nucleotidase 1A in patients with IBM is a potentially important advance that may aid early diagnosis and provides new evidence regarding the role of autoimmunity in IBM. Summary IBM remains an enigmatic and often misdiagnosed disease. The pathogenesis of the disease is still not fully understood. To date, pharmacological treatment trials have failed to show clear efficacy. Future research should continue to focus on improving understanding of the pathophysiological mechanisms of the disease and on the identification of reliable and sensitive outcome measures for clinical trials. IBM is a rare disease and international multicentre collaboration for trials is important to translate research advances into improved patient outcomes. PMID:24067381

Finite-difference solution for turbulent swirling compressible flow in axisymmetric ducts with struts

NASA Technical Reports Server (NTRS)

Anderson, O. L.

1974-01-01

A finite-difference procedure for computing the turbulent, swirling, compressible flow in axisymmetric ducts is described. Arbitrary distributions of heat and mass transfer at the boundaries can be treated, and the effects of struts, inlet guide vanes, and flow straightening vanes can be calculated. The calculation procedure is programmed in FORTRAN 4 and has operated successfully on the UNIVAC 1108, IBM 360, and CDC 6600 computers. The analysis which forms the basis of the procedure, a detailed description of the computer program, and the input/output formats are presented. The results of sample calculations performed with the computer program are compared with experimental data.

INM Integrated Noise Model Version 2. Programmer’s Guide

DTIC Science & Technology

1979-09-01

cost, turnaround time, and system-dependent limitations. 3.2 CONVERSION PROBLEMS Item Item Item No. Desciption Category 1 BLOCK DATA Initialization IBM ...Restricted 2 Boolean Operations Differences Call Statement Parameters Extensions 4 Data Initialization IBM Restricted 5 ENTRY Differences 6 EQUIVALENCE...Machine Dependent 7 Format: A CDC Extension 8 Hollerith Strings IBM Restricted 9 Hollerith Variables IBM Restricted 10 Identifier Names CDC Extension

Accuracy of the lattice-Boltzmann method using the Cell processor

NASA Astrophysics Data System (ADS)

Harvey, M. J.; de Fabritiis, G.; Giupponi, G.

2008-11-01

Accelerator processors like the new Cell processor are extending the traditional platforms for scientific computation, allowing orders of magnitude more floating-point operations per second (flops) compared to standard central processing units. However, they currently lack double-precision support and support for some IEEE 754 capabilities. In this work, we develop a lattice-Boltzmann (LB) code to run on the Cell processor and test the accuracy of this lattice method on this platform. We run tests for different flow topologies, boundary conditions, and Reynolds numbers in the range Re=6 350 . In one case, simulation results show a reduced mass and momentum conservation compared to an equivalent double-precision LB implementation. All other cases demonstrate the utility of the Cell processor for fluid dynamics simulations. Benchmarks on two Cell-based platforms are performed, the Sony Playstation3 and the QS20/QS21 IBM blade, obtaining a speed-up factor of 7 and 21, respectively, compared to the original PC version of the code, and a conservative sustained performance of 28 gigaflops per single Cell processor. Our results suggest that choice of IEEE 754 rounding mode is possibly as important as double-precision support for this specific scientific application.

Program Processes Thermocouple Readings

NASA Technical Reports Server (NTRS)

Quave, Christine A.; Nail, William, III

1995-01-01

Digital Signal Processor for Thermocouples (DART) computer program implements precise and fast method of converting voltage to temperature for large-temperature-range thermocouple applications. Written using LabVIEW software. DART available only as object code for use on Macintosh II FX or higher-series computers running System 7.0 or later and IBM PC-series and compatible computers running Microsoft Windows 3.1. Macintosh version of DART (SSC-00032) requires LabVIEW 2.2.1 or 3.0 for execution. IBM PC version (SSC-00031) requires LabVIEW 3.0 for Windows 3.1. LabVIEW software product of National Instruments and not included with program.

MEGA16 - Computer program for analysis and extrapolation of stress-rupture data

NASA Technical Reports Server (NTRS)

Ensign, C. R.

1981-01-01

The computerized form of the minimum commitment method of interpolating and extrapolating stress versus time to failure data, MEGA16, is described. Examples are given of its many plots and tabular outputs for a typical set of data. The program assumes a specific model equation and then provides a family of predicted isothermals for any set of data with at least 12 stress-rupture results from three different temperatures spread over reasonable stress and time ranges. It is written in FORTRAN 4 using IBM plotting subroutines and its runs on an IBM 370 time sharing system.

Ada Compiler Validation Summary Report. Certificate Number: 891129W1. 10198 International Business Machines Corporation, the IBM Development System for the Ada Language AIX/RT Follow-on, Version 1.1 IBM RT Follow-on. Completion of On-Site Testing: 29 November 1989

DTIC Science & Technology

1989-11-29

nvmbe’j International Business Machines Corporation Wright-Patterson AFB, The IBM Development System for the Ada Language AIX/RT follow-on, Version 1.1...Certificate Number: 891129W1.10198 International Business Machines Corporation The IBM Development System for the Ada Language AIX/RT Follow-on, Version 1.1 IBM...scripts provided by International Business Machines Corporation and reviewed by the validation team. The compiler was tested using all the following

Sporadic inclusion body myositis: the genetic contributions to the pathogenesis

PubMed Central

2014-01-01

Sporadic inclusion body myositis (sIBM) is the commonest idiopathic inflammatory muscle disease in people over 50 years old. It is characterized by slowly progressive muscle weakness and atrophy, with typical pathological changes of inflammation, degeneration and mitochondrial abnormality in affected muscle fibres. The cause(s) of sIBM are still unknown, but are considered complex, with the contribution of multiple factors such as environmental triggers, ageing and genetic susceptibility. This review summarizes the current understanding of the genetic contributions to sIBM and provides some insights for future research in this mysterious disease with the advantage of the rapid development of advanced genetic technology. An international sIBM genetic study is ongoing and whole-exome sequencing will be applied in a large cohort of sIBM patients with the aim of unravelling important genetic risk factors for sIBM. PMID:24948216

Investigation of triaxiality in 54122-128Xe isotopes in the framework of sdg-IBM

NASA Astrophysics Data System (ADS)

Jafarizadeh, M. A.; Ranjbar, Z.; Fouladi, N.; Ghapanvari, M.

In this paper, a transitional interacting boson model (IBM) Hamiltonian in both sd-(IBM) and sdg-IBM versions based on affine SU(1, 1) Lie algebra is employed to describe deviations from the gamma-unstable nature of Hamiltonian along the chain of Xe isotopes. sdg-IBM Hamiltonian proposed a better interpretation of this deviation which cannot be explained in the sd-boson models. The nuclei studied have well-known γ bands close to the γ-unstable limit. The energy levels, B(E2) transition rates and signature splitting of the γ -vibrational band are calculated via the affine SU(1,1) Lie algebra. An acceptable degree of agreement was achieved based on this procedure. It is shown that in these isotopes the signature splitting is better reproduced by the inclusion of sdg-IBM. In none of them, any evidence for a stable, triaxial ground state shape is found.

The UCLA MEDLARS Computer System *

PubMed Central

Garvis, Francis J.

1966-01-01

Under a subcontract with UCLA the Planning Research Corporation has changed the MEDLARS system to make it possible to use the IBM 7094/7040 direct-couple computer instead of the Honeywell 800 for demand searches. The major tasks were the rewriting of the programs in COBOL and copying of the stored information on the narrower tapes that IBM computers require. (In the future NLM will copy the tapes for IBM computer users.) The differences in the software required by the two computers are noted. Major and costly revisions would be needed to adapt the large MEDLARS system to the smaller IBM 1401 and 1410 computers. In general, MEDLARS is transferrable to other computers of the IBM 7000 class, the new IBM 360, and those of like size, such as the CDC 1604 or UNIVAC 1108, although additional changes are necessary. Potential future improvements are suggested. PMID:5901355

A performance comparison of the IBM RS/6000 and the Astronautics ZS-1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, W.M.; Abraham, S.G.; Davidson, E.S.

1991-01-01

Concurrent uniprocessor architectures, of which vector and superscalar are two examples, are designed to capitalize on fine-grain parallelism. The authors have developed a performance evaluation method for comparing and improving these architectures, and in this article they present the methodology and a detailed case study of two machines. The runtime of many programs is dominated by time spent in loop constructs - for example, Fortran Do-loops. Loops generally comprise two logical processes: The access process generates addresses for memory operations while the execute process operates on floating-point data. Memory access patterns typically can be generated independently of the data inmore » the execute process. This independence allows the access process to slip ahead, thereby hiding memory latency. The IBM 360/91 was designed in 1967 to achieve slip dynamically, at runtime. One CPU unit executes integer operations while another handles floating-point operations. Other machines, including the VAX 9000 and the IBM RS/6000, use a similar approach.« less

GPU accelerated study of heat transfer and fluid flow by lattice Boltzmann method on CUDA

NASA Astrophysics Data System (ADS)

Ren, Qinlong

Lattice Boltzmann method (LBM) has been developed as a powerful numerical approach to simulate the complex fluid flow and heat transfer phenomena during the past two decades. As a mesoscale method based on the kinetic theory, LBM has several advantages compared with traditional numerical methods such as physical representation of microscopic interactions, dealing with complex geometries and highly parallel nature. Lattice Boltzmann method has been applied to solve various fluid behaviors and heat transfer process like conjugate heat transfer, magnetic and electric field, diffusion and mixing process, chemical reactions, multiphase flow, phase change process, non-isothermal flow in porous medium, microfluidics, fluid-structure interactions in biological system and so on. In addition, as a non-body-conformal grid method, the immersed boundary method (IBM) could be applied to handle the complex or moving geometries in the domain. The immersed boundary method could be coupled with lattice Boltzmann method to study the heat transfer and fluid flow problems. Heat transfer and fluid flow are solved on Euler nodes by LBM while the complex solid geometries are captured by Lagrangian nodes using immersed boundary method. Parallel computing has been a popular topic for many decades to accelerate the computational speed in engineering and scientific fields. Today, almost all the laptop and desktop have central processing units (CPUs) with multiple cores which could be used for parallel computing. However, the cost of CPUs with hundreds of cores is still high which limits its capability of high performance computing on personal computer. Graphic processing units (GPU) is originally used for the computer video cards have been emerged as the most powerful high-performance workstation in recent years. Unlike the CPUs, the cost of GPU with thousands of cores is cheap. For example, the GPU (GeForce GTX TITAN) which is used in the current work has 2688 cores and the price is only 1,000 US dollars. The release of NVIDIA's CUDA architecture which includes both hardware and programming environment in 2007 makes GPU computing attractive. Due to its highly parallel nature, lattice Boltzmann method is successfully ported into GPU with a performance benefit during the recent years. In the current work, LBM CUDA code is developed for different fluid flow and heat transfer problems. In this dissertation, lattice Boltzmann method and immersed boundary method are used to study natural convection in an enclosure with an array of conduting obstacles, double-diffusive convection in a vertical cavity with Soret and Dufour effects, PCM melting process in a latent heat thermal energy storage system with internal fins, mixed convection in a lid-driven cavity with a sinusoidal cylinder, and AC electrothermal pumping in microfluidic systems on a CUDA computational platform. It is demonstrated that LBM is an efficient method to simulate complex heat transfer problems using GPU on CUDA.

Interacting Boson Model and nucleons

NASA Astrophysics Data System (ADS)

Otsuka, Takaharu

2012-10-01

An overview on the recent development of the microscopic derivation of the Interacting Boson Model is presented with some remarks not found elsewhere. The OAI mapping is reviewed very briefly, including the basic correspondence from nucleon-pair to boson. The new fermionboson mapping method is introduced, where intrinsic states of nucleons and bosons for a wide variation of shapes play an important role. Nucleon intrinsic states are obtained from mean field models, which is Skyrme model in examples to be shown. This method generates IBM-2 Hamiltonian which can describe and predict various situations of quadrupole collective states, including U(5), SU(3), O(6) and E(5) limits. The method is extended so that rotational response (cranking) can be handled, which enables us to describe rotational bands of strongly deformed nuclei. Thus, we have obtained a unified framework for the microscopic derivation of the IBM covering all known situations of quadrupole collectivity at low energy.

Implementation of NASTRAN on the IBM/370 CMS operating system

NASA Technical Reports Server (NTRS)

Britten, S. S.; Schumacker, B.

1980-01-01

The NASA Structural Analysis (NASTRAN) computer program is operational on the IBM 360/370 series computers. While execution of NASTRAN has been described and implemented under the virtual storage operating systems of the IBM 370 models, the IBM 370/168 computer can also operate in a time-sharing mode under the virtual machine operating system using the Conversational Monitor System (CMS) subset. The changes required to make NASTRAN operational under the CMS operating system are described.

Sporadic Inclusion Body Myositis: Possible pathogenesis inferred from biomarkers

PubMed Central

Weihl, Conrad C.; Pestronk, Alan

2013-01-01

Purpose of review The relevance of proteins that accumulate and aggregate in the muscle fibers of patients with sporadic inclusion body myositis (sIBM) is unknown. Many of these proteins also aggregate in other disorders, including Alzheimer’s disease, leading to speculation that sIBM pathogenesis has similarities to neurodegenerative disorders. Our review will discuss current studies on these protein biomarkers and any utility in sIBM diagnosis. Recent findings Two “classical” components of sIBM aggregates (Aβ and phospho-tau) have been re-evaluated. Three additional components of aggregates (TDP-43, p62, and LC3) have been identified. The sensitivity and specificity of these biomarkers has been explored. Two studies suggest that TDP-43 may have clinical utility in distinguishing sIBM from other inflammatory myopathies. Summary The fact that sIBM muscle accumulates multiple protein aggregates with no single protein appearing in every sIBM patient biopsy suggests that it is not presently possible to place pathogenic blame on any single protein (i.e. Aβ or TDP-43). Instead changes in protein homeostasis may lead to the accumulation of different proteins that have a propensity to aggregate in skeletal muscle. Therapies aimed at improving protein homeostasis, instead of targeting a specific protein that may or may not accumulate in all sIBM patients, could be useful future strategies for this devastating and enigmatic disorder. PMID:20664349

Online Help from IBM.

ERIC Educational Resources Information Center

Moore, Jack

1988-01-01

The article describes the IBM/Special Needs Exchange which consists of: (1) electronic mail, conferencing, and a library of text and program files on the CompuServe Information Service; and (2) a dial-in database of special education software for IBM and compatible computers. (DB)

A new computational method for the detection of horizontal gene transfer events.

PubMed

Tsirigos, Aristotelis; Rigoutsos, Isidore

2005-01-01

In recent years, the increase in the amounts of available genomic data has made it easier to appreciate the extent by which organisms increase their genetic diversity through horizontally transferred genetic material. Such transfers have the potential to give rise to extremely dynamic genomes where a significant proportion of their coding DNA has been contributed by external sources. Because of the impact of these horizontal transfers on the ecological and pathogenic character of the recipient organisms, methods are continuously sought that are able to computationally determine which of the genes of a given genome are products of transfer events. In this paper, we introduce and discuss a novel computational method for identifying horizontal transfers that relies on a gene's nucleotide composition and obviates the need for knowledge of codon boundaries. In addition to being applicable to individual genes, the method can be easily extended to the case of clusters of horizontally transferred genes. With the help of an extensive and carefully designed set of experiments on 123 archaeal and bacterial genomes, we demonstrate that the new method exhibits significant improvement in sensitivity when compared to previously published approaches. In fact, it achieves an average relative improvement across genomes of between 11 and 41% compared to the Codon Adaptation Index method in distinguishing native from foreign genes. Our method's horizontal gene transfer predictions for 123 microbial genomes are available online at http://cbcsrv.watson.ibm.com/HGT/.

Accelerating Climate and Weather Simulations through Hybrid Computing

NASA Technical Reports Server (NTRS)

Zhou, Shujia; Cruz, Carlos; Duffy, Daniel; Tucker, Robert; Purcell, Mark

2011-01-01

Unconventional multi- and many-core processors (e.g. IBM (R) Cell B.E.(TM) and NVIDIA (R) GPU) have emerged as effective accelerators in trial climate and weather simulations. Yet these climate and weather models typically run on parallel computers with conventional processors (e.g. Intel, AMD, and IBM) using Message Passing Interface. To address challenges involved in efficiently and easily connecting accelerators to parallel computers, we investigated using IBM's Dynamic Application Virtualization (TM) (IBM DAV) software in a prototype hybrid computing system with representative climate and weather model components. The hybrid system comprises two Intel blades and two IBM QS22 Cell B.E. blades, connected with both InfiniBand(R) (IB) and 1-Gigabit Ethernet. The system significantly accelerates a solar radiation model component by offloading compute-intensive calculations to the Cell blades. Systematic tests show that IBM DAV can seamlessly offload compute-intensive calculations from Intel blades to Cell B.E. blades in a scalable, load-balanced manner. However, noticeable communication overhead was observed, mainly due to IP over the IB protocol. Full utilization of IB Sockets Direct Protocol and the lower latency production version of IBM DAV will reduce this overhead.

The Easy Way of Finding Parameters in IBM (EWofFP-IBM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turkan, Nureddin

E2/M1 multipole mixing ratios of even-even nuclei in transitional region can be calculated as soon as B(E2) and B(M1) values by using the PHINT and/or NP-BOS codes. The correct calculations of energies must be obtained to produce such calculations. Also, the correct parameter values are needed to calculate the energies. The logic of the codes is based on the mathematical and physical Statements describing interacting boson model (IBM) which is one of the model of nuclear structure physics. Here, the big problem is to find the best fitted parameters values of the model. So, by using the Easy Way ofmore » Finding Parameters in IBM (EWofFP-IBM), the best parameter values of IBM Hamiltonian for {sup 102-110}Pd and {sup 102-110}Ru isotopes were firstly obtained and then the energies were calculated. At the end, it was seen that the calculated results are in good agreement with the experimental ones. In addition, it was carried out that the presented energy values obtained by using the EWofFP-IBM are dominantly better than the previous theoretical data.« less

Sporadic-inclusion body myositis (s-IBM) is not so prevalent in Istanbul/Turkey: a muscle biopsy based survey.

PubMed

Oflazer, P Serdaroglu; Deymeer, F; Parman, Y

2011-06-01

In a muscle biopsy based study, only 9 out of 5450 biopsy samples, received from all parts of greater Istanbul area, had typical clinical and most suggestive light microscopic sporadic-inclusion body myositis (s-IBM) findings. Two other patients with and ten further patients without characteristic light microscopic findings had referring diagnosis of s-IBM. As the general and the age-adjusted populations of Istanbul in 2010 were 13.255.685 and 2.347.300 respectively, the calculated corresponding 'estimated prevalences' of most suggestive s-IBM in the Istanbul area were 0.679 X 10(-6) and 3.834 X 10(-6). Since Istanbul receives heavy migration from all regions of Turkey and ours is the only muscle pathology laboratory in Istanbul, projection of these figures to the Turkish population was considered to be reasonable and an estimate of the prevalence of s-IBM in Turkey was obtained. The calculated 'estimated prevalence' of s-IBM in Turkey is lower than the previously reported rates from other countries. The wide variation in the prevalence rates of s-IBM may reflect different genetic, immunogenetic or environmental factors in different populations.

Hazardous Waste Cleanup: IBM Corporation, Former in Owego, New York

EPA Pesticide Factsheets

The corrective action activities at the facility are conducted by IBM Corporation, therefore IBM is listed as the operator of the Part 373 Hazardous Waste Management (HWM) Permit for corrective action. Lockheed Martin Corporation owns the facility and is l

Hazardous Waste Cleanup: IBM Corporation in Dayton, New Jersey

EPA Pesticide Factsheets

The IBM facility is located at 431 Ridge Road on a 66-acre parcel in a mixed residential and industrial section of Dayton, South Brunswick Township, Middlesex County, New Jersey. IBM's manufacturing plant was constructed in 1956 and used until 1985 for

76 FR 174 - International Business Machines (IBM), Global Sales Operations Organization, Sales and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-03

...] International Business Machines (IBM), Global Sales Operations Organization, Sales and Distribution Business Manager Roles; One Teleworker Located in Charleston, WV; International Business Machines (IBM), Global Sales Operations Organization, Sales and Distribution Business Unit, Relations Analyst and Band 8...

Design and development of an IBM/VM menu system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cazzola, D.J.

1992-10-01

This report describes a full screen menu system developed using IBM`s Interactive System Productivity Facility (ISPF) and the REXX programming language. The software was developed for the 2800 IBM/VM Electrical Computer Aided Design (ECAD) system. The system was developed to deliver electronic drawing definitions to a corporate drawing release system. Although this report documents the status of the menu system when it was retired, the methodologies used and the requirements defined are very applicable to replacement systems.

Ada Compiler Validation Summary Report. Certificate Number: 900726W1. 11017, Verdix Corporation VADS IBM RISC System/6000, AIX 3.1, VAda-110-7171, Version 6.0 IBM RISC System/6000 Model 530 = IBM RISC System/6000 Model 530

DTIC Science & Technology

1991-01-22

Customer Agreement Number: 90-05-29- VRX See Section 3.1 for any additional information about the testing environment. As a result of this validation...22 January 1991 90-05-29- VRX Ada COMPILER VALIDATION SUMMARY REPORT: Certificate Number: 900726W1.11017 Verdix Corporation VADS IBM RISC System/6000

Fracture Mechanics Analysis of Single and Double Rows of Fastener Holes Loaded in Bearing

DTIC Science & Technology

1976-04-01

the following subprograms for execution: 1. ASRL FEABL-2 subroutines ASMLTV, ASMSUB, BCON, FACT, ORK, QBACK, SETUP, SIMULQ, STACON, and XTRACT. 2. IBM ...based on program code generated by IBM FORTRAN-G1 and FORTRAN-H compilers, with demonstration runs made on an IBM 370/168 computer. Programs SROW and...DROW are supplied ready to execute on systems with IBM -standard FORTRAN unit members for the card reader (unit 5) and line printer (unit 6). The

Fuzzy control of small servo motors

NASA Technical Reports Server (NTRS)

Maor, Ron; Jani, Yashvant

1993-01-01

To explore the benefits of fuzzy logic and understand the differences between the classical control methods and fuzzy control methods, the Togai InfraLogic applications engineering staff developed and implemented a motor control system for small servo motors. The motor assembly for testing the fuzzy and conventional controllers consist of servo motor RA13M and an encoder with a range of 4096 counts. An interface card was designed and fabricated to interface the motor assembly and encoder to an IBM PC. The fuzzy logic based motor controller was developed using the TILShell and Fuzzy C Development System on an IBM PC. A Proportional-Derivative (PD) type conventional controller was also developed and implemented in the IBM PC to compare the performance with the fuzzy controller. Test cases were defined to include step inputs of 90 and 180 degrees rotation, sine and square wave profiles in 5 to 20 hertz frequency range, as well as ramp inputs. In this paper we describe our approach to develop a fuzzy as well as PH controller, provide details of hardware set-up and test cases, and discuss the performance results. In comparison, the fuzzy logic based controller handles the non-linearities of the motor assembly very well and provides excellent control over a broad range of parameters. Fuzzy technology, as indicated by our results, possesses inherent adaptive features.

75 FR 60141 - International Business Machines (IBM), Global Technology Services Delivery Division, Including On...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-29

... 25, 2010, applicable to workers of International Business Machines (IBM), Global Technology Services... hereby issued as follows: All workers of International Business Machines (IBM), Global Technology... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,164] International Business...

Targeting protein homeostasis in sporadic inclusion body myositis.

PubMed

Ahmed, Mhoriam; Machado, Pedro M; Miller, Adrian; Spicer, Charlotte; Herbelin, Laura; He, Jianghua; Noel, Janelle; Wang, Yunxia; McVey, April L; Pasnoor, Mamatha; Gallagher, Philip; Statland, Jeffrey; Lu, Ching-Hua; Kalmar, Bernadett; Brady, Stefen; Sethi, Huma; Samandouras, George; Parton, Matt; Holton, Janice L; Weston, Anne; Collinson, Lucy; Taylor, J Paul; Schiavo, Giampietro; Hanna, Michael G; Barohn, Richard J; Dimachkie, Mazen M; Greensmith, Linda

2016-03-23

Sporadic inclusion body myositis (sIBM) is the commonest severe myopathy in patients more than 50 years of age. Previous therapeutic trials have targeted the inflammatory features of sIBM but all have failed. Because protein dyshomeostasis may also play a role in sIBM, we tested the effects of targeting this feature of the disease. Using rat myoblast cultures, we found that up-regulation of the heat shock response with arimoclomol reduced key pathological markers of sIBM in vitro. Furthermore, in mutant valosin-containing protein (VCP) mice, which develop an inclusion body myopathy, treatment with arimoclomol ameliorated disease pathology and improved muscle function. We therefore evaluated arimoclomol in an investigator-led, randomized, double-blind, placebo-controlled, proof-of-concept trial in sIBM patients and showed that arimoclomol was safe and well tolerated. Although arimoclomol improved some IBM-like pathology in the mutant VCP mouse, we did not see statistically significant evidence of efficacy in the proof-of-concept patient trial. Copyright © 2016, American Association for the Advancement of Science.

MyoD expression restores defective myogenic differentiation of human mesoangioblasts from inclusion-body myositis muscle.

PubMed

Morosetti, Roberta; Mirabella, Massimiliano; Gliubizzi, Carla; Broccolini, Aldobrando; De Angelis, Luciana; Tagliafico, Enrico; Sampaolesi, Maurilio; Gidaro, Teresa; Papacci, Manuela; Roncaglia, Enrica; Rutella, Sergio; Ferrari, Stefano; Tonali, Pietro Attilio; Ricci, Enzo; Cossu, Giulio

2006-11-07

Inflammatory myopathies (IM) are acquired diseases of skeletal muscle comprising dermatomyositis (DM), polymyositis (PM), and inclusion-body myositis (IBM). Immunosuppressive therapies, usually beneficial for DM and PM, are poorly effective in IBM. We report the isolation and characterization of mesoangioblasts, vessel-associated stem cells, from diagnostic muscle biopsies of IM. The number of cells isolated, proliferation rate and lifespan, markers expression, and ability to differentiate into smooth muscle do not differ among normal and IM mesoangioblasts. At variance with normal, DM and PM mesoangioblasts, cells isolated from IBM, fail to differentiate into skeletal myotubes. These data correlate with lack in connective tissue of IBM muscle of alkaline phosphatase (ALP)-positive cells, conversely dramatically increased in PM and DM. A myogenic inhibitory basic helix-loop-helix factor B3 is highly expressed in IBM mesoangioblasts. Indeed, silencing this gene or overexpressing MyoD rescues the myogenic defect of IBM mesoangioblasts, opening novel cell-based therapeutic strategies for this crippling disorder.

MyoD expression restores defective myogenic differentiation of human mesoangioblasts from inclusion-body myositis muscle

PubMed Central

Morosetti, Roberta; Mirabella, Massimiliano; Gliubizzi, Carla; Broccolini, Aldobrando; De Angelis, Luciana; Tagliafico, Enrico; Sampaolesi, Maurilio; Gidaro, Teresa; Papacci, Manuela; Roncaglia, Enrica; Rutella, Sergio; Ferrari, Stefano; Tonali, Pietro Attilio; Ricci, Enzo; Cossu, Giulio

2006-01-01

Inflammatory myopathies (IM) are acquired diseases of skeletal muscle comprising dermatomyositis (DM), polymyositis (PM), and inclusion-body myositis (IBM). Immunosuppressive therapies, usually beneficial for DM and PM, are poorly effective in IBM. We report the isolation and characterization of mesoangioblasts, vessel-associated stem cells, from diagnostic muscle biopsies of IM. The number of cells isolated, proliferation rate and lifespan, markers expression, and ability to differentiate into smooth muscle do not differ among normal and IM mesoangioblasts. At variance with normal, DM and PM mesoangioblasts, cells isolated from IBM, fail to differentiate into skeletal myotubes. These data correlate with lack in connective tissue of IBM muscle of alkaline phosphatase (ALP)-positive cells, conversely dramatically increased in PM and DM. A myogenic inhibitory basic helix–loop–helix factor B3 is highly expressed in IBM mesoangioblasts. Indeed, silencing this gene or overexpressing MyoD rescues the myogenic defect of IBM mesoangioblasts, opening novel cell-based therapeutic strategies for this crippling disorder. PMID:17077152

Targeting Protein Homeostasis in Sporadic Inclusion Body Myositis

PubMed Central

Ahmed, Mhoriam; Machado, Pedro M.; Miller, Adrian; Spicer, Charlotte; Herbelin, Laura; He, Jianghua; Noel, Janelle; Wang, Yunxia; McVey, April L.; Pasnoor, Mamatha; Gallagher, Philip; Statland, Jeffrey; Lu, Ching-Hua; Kalmar, Bernadett; Brady, Stefen; Sethi, Huma; Samandouras, George; Parton, Matt; Holton, Janice L.; Weston, Anne; Collinson, Lucy; Taylor, J. Paul; Schiavo, Giampietro; Hanna, Michael G.; Barohn, Richard J.; Dimachkie, Mazen M.; Greensmith, Linda

2016-01-01

Sporadic inclusion body myositis (sIBM) is the commonest severe myopathy in patients over age 50. Previous therapeutic trials have targeted the inflammatory features of sIBM, but all have failed. Since protein dyshomeostasis may also play a role in sIBM, we tested the effects of targeting this feature of the disease. Using rat myoblast cultures, we found that up-regulation of the heat shock response with Arimoclomol reduced key pathological markers of sIBM in vitro. Furthermore, in mutant valosin-containing protein VCP mice, which develop an inclusion body myopathy (IBM), treatment with Arimoclomol ameliorated disease pathology and improved muscle function. We therefore evaluated the safety and tolerability of Arimoclomol in an investigator-lead, randomised, double-blind, placebo-controlled, proof-of-concept patient trial and gathered exploratory efficacy data which showed that Arimoclomol was safe and well tolerated. Although Arimoclomol improved some IBM-like pathology in vitro and in vivo in the mutant VCP mouse, we did not see statistically significant evidence of efficacy in this proof of concept patient trial. PMID:27009270

Reviews.

ERIC Educational Resources Information Center

Newland, Robert J.; And Others

1988-01-01

Reviews four organic chemistry computer programs and three books. Software includes: (1) NMR Simulator 7--for IBM or Macintosh, (2) Nucleic Acid Structure and Synthesis--for IBM, (3) Molecular Design Editor--for Apple II, and (4) Synthetic Adventure--for Apple II and IBM. Book topics include physical chemistry, polymer pioneers, and the basics of…

The coupling of fluids, dynamics, and controls on advanced architecture computers

NASA Technical Reports Server (NTRS)

Atwood, Christopher

1995-01-01

This grant provided for the demonstration of coupled controls, body dynamics, and fluids computations in a workstation cluster environment; and an investigation of the impact of peer-peer communication on flow solver performance and robustness. The findings of these investigations were documented in the conference articles.The attached publication, 'Towards Distributed Fluids/Controls Simulations', documents the solution and scaling of the coupled Navier-Stokes, Euler rigid-body dynamics, and state feedback control equations for a two-dimensional canard-wing. The poor scaling shown was due to serialized grid connectivity computation and Ethernet bandwidth limits. The scaling of a peer-to-peer communication flow code on an IBM SP-2 was also shown. The scaling of the code on the switched fabric-linked nodes was good, with a 2.4 percent loss due to communication of intergrid boundary point information. The code performance on 30 worker nodes was 1.7 (mu)s/point/iteration, or a factor of three over a Cray C-90 head. The attached paper, 'Nonlinear Fluid Computations in a Distributed Environment', documents the effect of several computational rate enhancing methods on convergence. For the cases shown, the highest throughput was achieved using boundary updates at each step, with the manager process performing communication tasks only. Constrained domain decomposition of the implicit fluid equations did not degrade the convergence rate or final solution. The scaling of a coupled body/fluid dynamics problem on an Ethernet-linked cluster was also shown.

76 FR 32231 - International Business Machines (IBM), Sales and Distribution Business Unit, Global Sales...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-03

... for the workers and former workers of International Business Machines (IBM), Sales and Distribution... reconsideration alleges that IBM outsourced to India and China. During the reconsideration investigation, it was..., Armonk, New York. The subject worker group supply computer software development and maintenance services...

76 FR 54800 - International Business Machines (IBM), Software Group Business Unit, Quality Assurance Group, San...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-02

... Machines (IBM), Software Group Business Unit, Quality Assurance Group, San Jose, California; Notice of... workers of International Business Machines (IBM), Software Group Business Unit, Optim Data Studio Tools QA... February 2, 2011 (76 FR 5832). The subject worker group supplies acceptance testing services, design...

[IBM Work and Personal Life Balance Programs.

ERIC Educational Resources Information Center

International Business Machines Corp., Armonk, NY.

These five brochures describe the IBM Corporation's policies, programs, and initiatives designed to meet the needs of employees' child care and family responsibilities as they move through various stages of employment with IBM. The Work and Personal Life Balance Programs brochure outlines (1) policies for flexible work schedules, including…

Ada Compiler Validation Summary Report: Certificate Number: 890420W1. 10066 International Business Machines Corporation, IBM Development System for the Ada Language, AIX/RT Ada Compiler, Version 1.1.1, IBM RT PC 6150-125

DTIC Science & Technology

1989-04-20

International Business Machines Corporation, IBM Development System. for the Ada Language AIX/RT Ada Compiler, Version 1.1.1, Wright-Patterson APB...Certificate Number: 890420V1.10066 International Business Machines Corporation IBM Development System for the Ada Language AIX/RT Ada Compiler, Version 1.1.1...TEST INFORMATION The compiler was tested using command scripts provided by International Business Machines Corporation and reviewed by the validation

Ada Compiler Validation Summary Report: Certificate Number 880318W1. 09042, International Business Machines Corporation, IBM Development System for the Ada Language, Version 2.1.0, IBM 4381 under MVS/XA, Host and Target

DTIC Science & Technology

1988-03-28

International Business Machines Corporation IBM Development System for the Ada Language, Version 2.1.0 IBM 4381 under MVS/XA, host and target Completion...Joint Program Office, AJPO 20. ABSTRACT (Continue on reverse side if necessary and identify by block number) International Business Machines Corporation...in the compiler listed in this declaration. I declare that International Business Machines Corporation is the owner of record of the object code of

Simple model for deriving sdg interacting boson model Hamiltonians: 150Nd example

NASA Astrophysics Data System (ADS)

Devi, Y. D.; Kota, V. K. B.

1993-07-01

A simple and yet useful model for deriving sdg interacting boson model (IBM) Hamiltonians is to assume that single-boson energies derive from identical particle (pp and nn) interactions and proton, neutron single-particle energies, and that the two-body matrix elements for bosons derive from pn interaction, with an IBM-2 to IBM-1 projection of the resulting p-n sdg IBM Hamiltonian. The applicability of this model in generating sdg IBM Hamiltonians is demonstrated, using a single-j-shell Otsuka-Arima-Iachello mapping of the quadrupole and hexadecupole operators in proton and neutron spaces separately and constructing a quadrupole-quadrupole plus hexadecupole-hexadecupole Hamiltonian in the analysis of the spectra, B(E2)'s, and E4 strength distribution in the example of 150Nd.

Aircraft noise prediction program propeller analysis system IBM-PC version user's manual version 2.0

NASA Technical Reports Server (NTRS)

Nolan, Sandra K.

1988-01-01

The IBM-PC version of the Aircraft Noise Prediction Program (ANOPP) Propeller Analysis System (PAS) is a set of computational programs for predicting the aerodynamics, performance, and noise of propellers. The ANOPP-PAS is a subset of a larger version of ANOPP which can be executed on CDC or VAX computers. This manual provides a description of the IBM-PC version of the ANOPP-PAS and its prediction capabilities, and instructions on how to use the system on an IBM-XT or IBM-AT personal computer. Sections within the manual document installation, system design, ANOPP-PAS usage, data entry preprocessors, and ANOPP-PAS functional modules and procedures. Appendices to the manual include a glossary of ANOPP terms and information on error diagnostics and recovery techniques.

Effects of an Appearance-Focused Interpretation Training Intervention on Eating Disorder Symptoms.

PubMed

Summers, Berta J; Cougle, Jesse R

2018-03-13

Previous research suggests that computerized interpretation bias modification (IBM) techniques may be useful for modifying thoughts and behaviours relevant to eating pathology; however, little is known about the utility of IBM for decreasing specific eating disorder (ED) symptoms (e.g. bulimia, drive for thinness). The current study sought to further examine the utility of IBM for ED symptoms via secondary analyses of an examination of IBM for individuals with elevated body dysmorphic disorder (BDD) symptoms (see Summers and Cougle, 2016), as these disorders are both characterized by threat interpretation biases of ambiguous appearance-related information. We recruited 41 participants for a randomized trial comparing four sessions of IBM aimed at modifying problematic social and appearance-related threat interpretation biases with a placebo control training (PC). At 1-week post-treatment, and relative to the PC, the IBM group reported greater reductions in negative/threat interpretations of ambiguous information in favour of positive/benign biases. Furthermore, among individuals with high pre-treatment bulimia symptoms, IBM yielded greater reductions in bulimia symptoms compared with PC at post-treatment. No treatment effects were observed on drive for thinness symptoms. The current study suggests that cognitive interventions for individuals with primary BDD symptoms may improve co-occurring ED symptoms such as bulimia.

Rare variants in SQSTM1 and VCP genes and risk of sporadic inclusion body myositis.

PubMed

Gang, Qiang; Bettencourt, Conceição; Machado, Pedro M; Brady, Stefen; Holton, Janice L; Pittman, Alan M; Hughes, Deborah; Healy, Estelle; Parton, Matthew; Hilton-Jones, David; Shieh, Perry B; Needham, Merrilee; Liang, Christina; Zanoteli, Edmar; de Camargo, Leonardo Valente; De Paepe, Boel; De Bleecker, Jan; Shaibani, Aziz; Ripolone, Michela; Violano, Raffaella; Moggio, Maurizio; Barohn, Richard J; Dimachkie, Mazen M; Mora, Marina; Mantegazza, Renato; Zanotti, Simona; Singleton, Andrew B; Hanna, Michael G; Houlden, Henry

2016-11-01

Genetic factors have been suggested to be involved in the pathogenesis of sporadic inclusion body myositis (sIBM). Sequestosome 1 (SQSTM1) and valosin-containing protein (VCP) are 2 key genes associated with several neurodegenerative disorders but have yet to be thoroughly investigated in sIBM. A candidate gene analysis was conducted using whole-exome sequencing data from 181 sIBM patients, and whole-transcriptome expression analysis was performed in patients with genetic variants of interest. We identified 6 rare missense variants in the SQSTM1 and VCP in 7 sIBM patients (4.0%). Two variants, the SQSTM1 p.G194R and the VCP p.R159C, were significantly overrepresented in this sIBM cohort compared with controls. Five of these variants had been previously reported in patients with degenerative diseases. The messenger RNA levels of major histocompatibility complex genes were upregulated, this elevation being more pronounced in SQSTM1 patient group. We report for the first time potentially pathogenic SQSTM1 variants and expand the spectrum of VCP variants in sIBM. These data suggest that defects in neurodegenerative pathways may confer genetic susceptibility to sIBM and reinforce the mechanistic overlap in these neurodegenerative disorders. Copyright © 2016 The Author(s). Published by Elsevier Inc. All rights reserved.

TRUMP; transient and steady state temperature distribution. [IBM360,370; CDC7600; FORTRAN IV (95%) and BAL (5%) (IBM); FORTRAN IV (CDC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elrod, D.C.; Turner, W.D.

TRUMP solves a general nonlinear parabolic partial differential equation describing flow in various kinds of potential fields, such as fields of temperature, pressure, or electricity and magnetism; simultaneously, it will solve two additional equations representing, in thermal problems, heat production by decomposition of two reactants having rate constants with a general Arrhenius temperature dependence. Steady-state and transient flow in one, two, or three dimensions are considered in geometrical configurations having simple or complex shapes and structures. Problem parameters may vary with spatial position, time, or primary dependent variables--temperature, pressure, or field strength. Initial conditions may vary with spatial position, andmore » among the criteria that may be specified for ending a problem are upper and lower limits on the size of the primary dependent variable, upper limits on the problem time or on the number of time-steps or on the computer time, and attainment of steady state.IBM360,370;CDC7600; FORTRAN IV (95%) and BAL (5%) (IBM); FORTRAN IV (CDC); OS/360 (IBM360), OS/370 (IBM370), SCOPE 2.1.5 (CDC7600); As dimensioned, the program requires 400K bytes of storage on an IBM370 and 145,100 (octal) words on a CDC7600.« less

A Comparison of the Apple Macintosh and IBM PC in Laboratory Applications.

ERIC Educational Resources Information Center

Williams, Ron

1986-01-01

Compares Apple Macintosh and IBM PC microcomputers in terms of their usefulness in the laboratory. No attempt is made to equalize the two computer systems since they represent opposite ends of the computer spectrum. Indicates that the IBM PC is the most useful general-purpose personal computer for laboratory applications. (JN)

Training in the Workplace: An IBM Case Study. Contractor Report.

ERIC Educational Resources Information Center

Grubb, Ralph E.

International Business Machines Corporation's (IBM) efforts to develop a corporate culture are associated with its founder, Thomas J. Watson, Sr. From the start of his association with the company in 1914, the importance of education was stressed. The expansion of the education and training organization paralleled IBM's 75-year growth. In January…

76 FR 5832 - International Business Machines (IBM), Software Group Business Unit, Optim Data Studio Tools QA...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-02

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,554] International Business Machines (IBM), Software Group Business Unit, Optim Data Studio Tools QA, San Jose, CA; Notice of... determination of the TAA petition filed on behalf of workers at International Business Machines (IBM), Software...

PubMed Central

SERDAROGLU OFLAZER, P.; DEYMEER, F.; PARMAN, Y.

2011-01-01

SUMMARY In a muscle biopsy based study, only 9 out of 5450 biopsy samples, received from all parts of greater Istanbul area, had typical clinical and most suggestive light microscopic sporadic-inclusion body myositis (s-IBM) findings. Two other patients with and ten further patients without characteristic light microscopic findings had referring diagnosis of s-IBM. As the general and the ageadjusted populations of Istanbul in 2010 were 13.255.685 and 2.347.300 respectively, the calculated corresponding ‘estimated prevalences' of most suggestive s-IBM in the Istanbul area were 0.679 X 10-6 and 3.834 X 10-6. Since Istanbul receives heavy migration from all regions of Turkey and ours is the only muscle pathology laboratory in Istanbul, projection of these figures to the Turkish population was considered to be reasonable and an estimate of the prevalence of s-IBM in Turkey was obtained. The calculated ‘estimated prevalence' of s-IBM in Turkey is lower than the previously reported rates from other countries. The wide variation in the prevalence rates of s-IBM may reflect different genetic, immunogenetic or environmental factors in different populations. PMID:21842592

Paired helical filaments of inclusion-body myositis muscle contain RNA and survival motor neuron protein.

PubMed

Broccolini, A; Engel, W K; Alvarez, R B; Askanas, V

2000-04-01

Sporadic inclusion-body myositis (s-IBM) is the most common progressive muscle disease of older persons. Pathologically, the muscle biopsy manifests various degrees of inflammation and specific vacuolar degeneration of muscle fibers characterized by paired helical filaments (PHFs) composed of phosphorylated tau. IBM vacuolated fibers also contain accumulations of several other Alzheimer-characteristic proteins. Molecular mechanisms leading to formation of the PHFs and accumulations of proteins in IBM muscle are not known. We report that the abnormal muscle fibers of IBM contained (i) acridine-orange-positive RNA inclusions that colocalized with the immunoreactivity of phosphorylated tau and (ii) survival motor neuron protein immunoreactive inclusions, which by immuno-electron microscopy were confined to paired helical filaments. This study demonstrates two novel components of the IBM paired helical filaments, which may lead to better understanding of their pathogenesis.

Best kept secrets ... First Coast Systems, Inc. (FCS).

PubMed

Andrew, W F

1991-04-01

The FCS/APaCS system is a viable option for small-to medium-size hospitals (up to 400 beds). The table-driven system takes full advantage of IBM AS/400 computer architecture. A comprehensive application set, provided in an integrated database environment, is adaptable to multi-facility environments. Price/performance appears to be competitive. Commitment to IBM AS/400 environment assures cost-effective hardware platforms backed by IBM support and resources. As an IBM Health Industry Business Partner, FCS (and its clients) benefits from IBM's well-known commitment to quality and service. Corporate emphasis on user involvement and satisfaction, along with a commitment to quality and service for the APaCS systems, assures clients of "leading edge" capabilities in this evolutionary healthcare delivery environment. FCS/APaCS will be a strong contender in selected marketing environments.

GRID2D/3D: A computer program for generating grid systems in complex-shaped two- and three-dimensional spatial domains. Part 1: Theory and method

NASA Technical Reports Server (NTRS)

Shih, T. I.-P.; Bailey, R. T.; Nguyen, H. L.; Roelke, R. J.

1990-01-01

An efficient computer program, called GRID2D/3D was developed to generate single and composite grid systems within geometrically complex two- and three-dimensional (2- and 3-D) spatial domains that can deform with time. GRID2D/3D generates single grid systems by using algebraic grid generation methods based on transfinite interpolation in which the distribution of grid points within the spatial domain is controlled by stretching functions. All single grid systems generated by GRID2D/3D can have grid lines that are continuous and differentiable everywhere up to the second-order. Also, grid lines can intersect boundaries of the spatial domain orthogonally. GRID2D/3D generates composite grid systems by patching together two or more single grid systems. The patching can be discontinuous or continuous. For continuous composite grid systems, the grid lines are continuous and differentiable everywhere up to the second-order except at interfaces where different single grid systems meet. At interfaces where different single grid systems meet, the grid lines are only differentiable up to the first-order. For 2-D spatial domains, the boundary curves are described by using either cubic or tension spline interpolation. For 3-D spatial domains, the boundary surfaces are described by using either linear Coon's interpolation, bi-hyperbolic spline interpolation, or a new technique referred to as 3-D bi-directional Hermite interpolation. Since grid systems generated by algebraic methods can have grid lines that overlap one another, GRID2D/3D contains a graphics package for evaluating the grid systems generated. With the graphics package, the user can generate grid systems in an interactive manner with the grid generation part of GRID2D/3D. GRID2D/3D is written in FORTRAN 77 and can be run on any IBM PC, XT, or AT compatible computer. In order to use GRID2D/3D on workstations or mainframe computers, some minor modifications must be made in the graphics part of the program; no modifications are needed in the grid generation part of the program. This technical memorandum describes the theory and method used in GRID2D/3D.

Inclusion body myositis.

PubMed

Dimachkie, Mazen M; Barohn, Richard J

2014-08-01

The idiopathic inflammatory myopathies (IIMs) are a heterogeneous group of rare disorders that share many similarities. In addition to sporadic inclusion body myositis (IBM), these include dermatomyositis, polymyositis, and autoimmune necrotizing myopathy. IBM is the most common IIM after age 50 years. Muscle histopathology shows endomysial inflammatory exudates surrounding and invading nonnecrotic muscle fibers often accompanied by rimmed vacuoles and protein deposits. It is likely that IBM is has a prominent degenerative component. This article reviews the evolution of knowledge in IBM, with emphasis on recent developments in the field, and discusses ongoing clinical trials. Copyright © 2014 Elsevier Inc. All rights reserved.

LLNL Partners with IBM on Brain-Like Computing Chip

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Essen, Brian

Lawrence Livermore National Laboratory (LLNL) will receive a first-of-a-kind brain-inspired supercomputing platform for deep learning developed by IBM Research. Based on a breakthrough neurosynaptic computer chip called IBM TrueNorth, the scalable platform will process the equivalent of 16 million neurons and 4 billion synapses and consume the energy equivalent of a hearing aid battery – a mere 2.5 watts of power. The brain-like, neural network design of the IBM Neuromorphic System is able to infer complex cognitive tasks such as pattern recognition and integrated sensory processing far more efficiently than conventional chips.

LLNL Partners with IBM on Brain-Like Computing Chip

ScienceCinema

Van Essen, Brian

2018-06-25

Lawrence Livermore National Laboratory (LLNL) will receive a first-of-a-kind brain-inspired supercomputing platform for deep learning developed by IBM Research. Based on a breakthrough neurosynaptic computer chip called IBM TrueNorth, the scalable platform will process the equivalent of 16 million neurons and 4 billion synapses and consume the energy equivalent of a hearing aid battery – a mere 2.5 watts of power. The brain-like, neural network design of the IBM Neuromorphic System is able to infer complex cognitive tasks such as pattern recognition and integrated sensory processing far more efficiently than conventional chips.

Ada (Trade Name) Compiler Validation Summary Report: IBM Corporation. IBM Development System for the Ada Language System, Version 1.1.0, IBM 4381 under VM/SP CMS, Release 3.6.

DTIC Science & Technology

1988-05-19

System for the Ada Language System, Version 1.1.0, 1.% International Business Machines Corporation, Wright-Patterson AFB. IBM 4381 under VM/SP CMS...THIS PAGE (When Data Enre’ed) AVF Control Number: AVF-VSR-82.1087 87-03-10-TEL ! Ada® COMPILER VALIDATION SUMMARY REPORT: International Business Machines...Organization (AVO). On-site testing was conducted from !8 May 1987 through 19 May 1987 at International Business Machines -orporation, San Diego CA. 1.2

Numerical study of heat and mass transfer in inertial suspensions in pipes.

NASA Astrophysics Data System (ADS)

Niazi Ardekani, Mehdi; Brandt, Luca

2017-11-01

Controlling heat and mass transfer in particulate suspensions has many important applications such as packed and fluidized bed reactors and industrial dryers. In this work, we study the heat and mass transfer within a suspension of spherical particles in a laminar pipe flow, using the immersed boundary method (IBM) to account for the solid fluid interactions and a volume of fluid (VoF) method to resolve temperature equation both inside and outside of the particles. Tracers that follow the fluid streamlines are considered to investigate mass transfer within the suspension. Different particle volume fractions 5, 15, 30 and 40% are simulated for different pipe to particle diameter ratios: 5, 10 and 15. The preliminary results quantify the heat and mass transfer enhancement with respect to a single-phase laminar pipe flow. We show in particular that the heat transfer from the wall saturates for volume fractions more than 30%, however at high particle Reynolds numbers (small diameter ratios) the heat transfer continues to increase. Regarding the dispersion of tracer particles we show that the diffusivity of tracers increases with volume fraction in radial and stream-wise directions however it goes through a peak at 15% in the azimuthal direction. European Research Council, Grant No. ERC-2013-CoG- 616186, TRITOS; SNIC (the Swedish National Infrastructure for Computing).

Taste function assessed by electrogustometry in burning mouth syndrome: a case-control study.

PubMed

Braud, A; Descroix, V; Ungeheuer, M-N; Rougeot, C; Boucher, Y

2017-04-01

Idiopathic burning mouth syndrome (iBMS) is characterized by oral persistent pain without any clinical or biological abnormality. The aim of this study was to evaluate taste function in iBMS subjects and healthy controls. Electrogustometric thresholds (EGMt) were recorded in 21 iBMS patients and 21 paired-matched controls at nine loci of the tongue assessing fungiform and foliate gustatory papillae function. Comparison of EGMt was performed using the nonparametric Wilcoxon signed-rank test. A correlation between EGMt and self-perceived pain intensity assessed using a visual analogic scale (VAS) was analyzed with the Spearman coefficient. The level of significance was fixed at P < 0.05. Mean EGMt were significantly increased with iBMS for right side of the dorsum of the tongue and right lateral side of the tongue (P < 0.05). In the iBMS group, VAS scores were significantly correlated to EGMt at the tip of the tongue (r = -0.59; P < 0.05) and at the right and left lateral sides of the tongue (respectively, r = -0.49 and r = -0.47; P < 0.05). These data depicted impaired taste sensitivity in iBMS patients within fungiform and foliate taste bud fields and support potent gustatory/nociceptive interaction in iBMS. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Exactly solvable model of transitional nuclei based on dual algebraic structure for the three level pairing model in the framework of sdg interacting boson model

NASA Astrophysics Data System (ADS)

Jafarizadeh, M. A.; Ranjbar, Z.; Fouladi, N.; Ghapanvari, M.

2018-01-01

In this paper, a successful algebraic method based on the dual algebraic structure for three level pairing model in the framework of sdg IBM is proposed for transitional nuclei which show transitional behavior from spherical to gamma-unstable quantum shape phase transition. In this method complicated sdg Hamiltonian, which is a three level pairing Hamiltonian is determined easily via the exactly solvable method. This description provides a better interpretation of some observables such as BE (4) in nuclei which exhibits the necessity of inclusion of g boson in the sd IBM, while BE (4) cannot be explained in the sd boson model. Some observables such as Energy levels, BE (2), BE (4), the two neutron separation energies signature splitting of the γ-vibrational band and expectation values of the g-boson number operator are calculated and examined for 46 104 - 110Pd isotopes.

IBM Academic Information Systems University AEP Conference: "Tools for Learning" (2nd, San Diego, California, April 5-8, 1986). Agenda [and Abstracts].

ERIC Educational Resources Information Center

International Business Machines Corp., Milford, CT. Academic Information Systems.

This agenda lists activities scheduled for the second IBM (International Business Machines) Academic Information Systems University AEP (Advanced Education Projects) Conference, which was designed to afford the universities participating in the IBM-sponsored AEPs an opportunity to demonstrate their AEP experiments in educational computing. In…

Computer Associates International, CA-ACF2/VM Release 3.1

DTIC Science & Technology

1987-09-09

Associates CA-ACF2/VM Bibliography International Business Machines Corporation, IBM Virtual Machine/Directory Maintenance Program Logic Manual...publication number LY20-0889 International Business Machines International Business Machines Corporation, IBM System/370 Principles of Operation...publication number GA22-7000 International Business Machines Corporation, IBM Virtual Machine/Directory Maintenance Installation and System Administrator’s

Scalability of Parallel Spatial Direct Numerical Simulations on Intel Hypercube and IBM SP1 and SP2

NASA Technical Reports Server (NTRS)

Joslin, Ronald D.; Hanebutte, Ulf R.; Zubair, Mohammad

1995-01-01

The implementation and performance of a parallel spatial direct numerical simulation (PSDNS) approach on the Intel iPSC/860 hypercube and IBM SP1 and SP2 parallel computers is documented. Spatially evolving disturbances associated with the laminar-to-turbulent transition in boundary-layer flows are computed with the PSDNS code. The feasibility of using the PSDNS to perform transition studies on these computers is examined. The results indicate that PSDNS approach can effectively be parallelized on a distributed-memory parallel machine by remapping the distributed data structure during the course of the calculation. Scalability information is provided to estimate computational costs to match the actual costs relative to changes in the number of grid points. By increasing the number of processors, slower than linear speedups are achieved with optimized (machine-dependent library) routines. This slower than linear speedup results because the computational cost is dominated by FFT routine, which yields less than ideal speedups. By using appropriate compile options and optimized library routines on the SP1, the serial code achieves 52-56 M ops on a single node of the SP1 (45 percent of theoretical peak performance). The actual performance of the PSDNS code on the SP1 is evaluated with a "real world" simulation that consists of 1.7 million grid points. One time step of this simulation is calculated on eight nodes of the SP1 in the same time as required by a Cray Y/MP supercomputer. For the same simulation, 32-nodes of the SP1 and SP2 are required to reach the performance of a Cray C-90. A 32 node SP1 (SP2) configuration is 2.9 (4.6) times faster than a Cray Y/MP for this simulation, while the hypercube is roughly 2 times slower than the Y/MP for this application. KEY WORDS: Spatial direct numerical simulations; incompressible viscous flows; spectral methods; finite differences; parallel computing.

Applications Performance Under MPL and MPI on NAS IBM SP2

NASA Technical Reports Server (NTRS)

Saini, Subhash; Simon, Horst D.; Lasinski, T. A. (Technical Monitor)

1994-01-01

On July 5, 1994, an IBM Scalable POWER parallel System (IBM SP2) with 64 nodes, was installed at the Numerical Aerodynamic Simulation (NAS) Facility Each node of NAS IBM SP2 is a "wide node" consisting of a RISC 6000/590 workstation module with a clock of 66.5 MHz which can perform four floating point operations per clock with a peak performance of 266 Mflop/s. By the end of 1994, 64 nodes of IBM SP2 will be upgraded to 160 nodes with a peak performance of 42.5 Gflop/s. An overview of the IBM SP2 hardware is presented. The basic understanding of architectural details of RS 6000/590 will help application scientists the porting, optimizing, and tuning of codes from other machines such as the CRAY C90 and the Paragon to the NAS SP2. Optimization techniques such as quad-word loading, effective utilization of two floating point units, and data cache optimization of RS 6000/590 is illustrated, with examples giving performance gains at each optimization step. The conversion of codes using Intel's message passing library NX to codes using native Message Passing Library (MPL) and the Message Passing Interface (NMI) library available on the IBM SP2 is illustrated. In particular, we will present the performance of Fast Fourier Transform (FFT) kernel from NAS Parallel Benchmarks (NPB) under MPL and MPI. We have also optimized some of Fortran BLAS 2 and BLAS 3 routines, e.g., the optimized Fortran DAXPY runs at 175 Mflop/s and optimized Fortran DGEMM runs at 230 Mflop/s per node. The performance of the NPB (Class B) on the IBM SP2 is compared with the CRAY C90, Intel Paragon, TMC CM-5E, and the CRAY T3D.

Paired Helical Filaments of Inclusion-Body Myositis Muscle Contain RNA and Survival Motor Neuron Protein

PubMed Central

Broccolini, Aldobrando; Engel, W. King; Alvarez, Renate B.; Askanas, Valerie

2000-01-01

Sporadic inclusion-body myositis (s-IBM) is the most common progressive muscle disease of older persons. Pathologically, the muscle biopsy manifests various degrees of inflammation and specific vacuolar degeneration of muscle fibers characterized by paired helical filaments (PHFs) composed of phosphorylated tau. IBM vacuolated fibers also contain accumulations of several other Alzheimer-characteristic proteins. Molecular mechanisms leading to formation of the PHFs and accumulations of proteins in IBM muscle are not known. We report that the abnormal muscle fibers of IBM contained (i) acridine-orange-positive RNA inclusions that colocalized with the immunoreactivity of phosphorylated tau and (ii) survival motor neuron protein immunoreactive inclusions, which by immuno-electron microscopy were confined to paired helical filaments. This study demonstrates two novel components of the IBM paired helical filaments, which may lead to better understanding of their pathogenesis. PMID:10751338

Individual-based modeling of ecological and evolutionary processes

USGS Publications Warehouse

DeAngelis, Donald L.; Mooij, Wolf M.

2005-01-01

Individual-based models (IBMs) allow the explicit inclusion of individual variation in greater detail than do classical differential-equation and difference-equation models. Inclusion of such variation is important for continued progress in ecological and evolutionary theory. We provide a conceptual basis for IBMs by describing five major types of individual variation in IBMs: spatial, ontogenetic, phenotypic, cognitive, and genetic. IBMs are now used in almost all subfields of ecology and evolutionary biology. We map those subfields and look more closely at selected key papers on fish recruitment, forest dynamics, sympatric speciation, metapopulation dynamics, maintenance of diversity, and species conservation. Theorists are currently divided on whether IBMs represent only a practical tool for extending classical theory to more complex situations, or whether individual-based theory represents a radically new research program. We feel that the tension between these two poles of thinking can be a source of creativity in ecology and evolutionary theory.

A microprocessor-based automation test system for the experiment of the multi-stage compressor

NASA Astrophysics Data System (ADS)

Zhang, Huisheng; Lin, Chongping

1991-08-01

An automation test system that is controlled by the microprocessor and used in the multistage compressor experiment is described. Based on the analysis of the compressor experiment performances, a complete hardware system structure is set up. It is composed of a IBM PC/XT computer, a large scale sampled data system, the moving machine with three directions, the scanners, the digital instrumentation and some output devices. A program structure of real-time software system is described. The testing results show that this test system can take the measure of many parameter magnitudes in the blade row places and on a boundary layer in different states. The automatic extent and the accuracy of experiment is increased and the experimental cost is reduced.

New Generation General Purpose Computer (GPC) compact IBM unit

NASA Technical Reports Server (NTRS)

1991-01-01

New Generation General Purpose Computer (GPC) compact IBM unit replaces a two-unit earlier generation computer. The new IBM unit is documented in table top views alone (S91-26867, S91-26868), with the onboard equipment it supports including the flight deck CRT screen and keypad (S91-26866), and next to the two earlier versions it replaces (S91-26869).

77 FR 41720 - Hazardous Waste Management System; Identification and Listing of Hazardous Waste; Proposed Exclusion

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-16

... delist? B. How does IBM generate the waste? C. How did IBM sample and analyze the petitioned waste? D..., thickened/conditioned, and pressed to generate the F006 waste stream. C. How did IBM sample and analyze the... the volatiles and semi-volatiles samples were non- detect. E. How did EPA evaluate the risk of...

Survey of Mass Storage Systems

DTIC Science & Technology

1975-09-01

software that Pre- cision Instruments can provide. System Name: IBM 3850 Mass Storage System Manufacturer and Location: International Business Machines...34 Datamation, pp. 52-58, October 1973. 15 17. International Business Machines, IBM 3850 Mass Storage System Facts Folder, White Plains, NY, n.d. 18... International Business Machines, Introduction to the IBM 3850 Mass Storage System (MSS), White Plains, NY, n.d. 19. International Business Machines

Anesthetic Considerations of Sporadic Inclusion Body Myositis in an Elderly Man With Orthopedic Trauma.

PubMed

Steck, Dominik T; Choi, Christine; Gollapudy, Suneeta; Pagel, Paul S

2016-04-01

Sporadic inclusion body myositis (IBM) is an inflammatory myopathy characterized by progressive asymmetric extremity weakness, oropharyngeal dysphagia, and the potential for exaggerated sensitivity to neuromuscular blockers and respiratory compromise. The authors describe their management of a patient with IBM undergoing urgent orthopedic surgery. An 81-year-old man with IBM suffered a left intertrochanteric femoral fracture after falling down stairs. His IBM caused progressive left proximal lower extremity, bilateral distal upper extremity weakness (left > right), and oropharyngeal dysphagia (solid food, pills). He denied dyspnea, exercise intolerance, and a history of aspiration. Because respiratory insufficiency resulting from diaphragmatic dysfunction and prolonged duration of action of neuromuscular blockers may occur in IBM, the authors avoided using a neuromuscular blocker. After applying cricoid pressure, anesthesia was induced using intravenous lidocaine, propofol, remifentanil followed by manual ventilation with inhaled sevoflurane in oxygen. Endotracheal intubation was accomplished without difficulty; anesthesia was then maintained using remifentanil and sevoflurane. The fracture was repaired with a trochanteric femoral nail. The patient was extubated without difficulty and made an uneventful recovery. In summary, there is a lack of consensus about the use of neuromuscular blockers in patients with IBM. The authors avoided these drugs and were able to easily secure the patient's airway and maintain adequate muscle relaxation using a balanced sevoflurane-remifentanil anesthetic. Clinical trials are necessary to define the pharmacology of neuromuscular blockers in patients with IBM and determine whether use of these drugs contributes to postoperative respiratory insufficiency in these vulnerable patients.

Computer grading of examinations

NASA Technical Reports Server (NTRS)

Frigerio, N. A.

1969-01-01

A method, using IBM cards and computer processing, automates examination grading and recording and permits use of computational problems. The student generates his own answers, and the instructor has much greater freedom in writing questions than is possible with multiple choice examinations.

2DRMP: A suite of two-dimensional R-matrix propagation codes

NASA Astrophysics Data System (ADS)

Scott, N. S.; Scott, M. P.; Burke, P. G.; Stitt, T.; Faro-Maza, V.; Denis, C.; Maniopoulou, A.

2009-12-01

The R-matrix method has proved to be a remarkably stable, robust and efficient technique for solving the close-coupling equations that arise in electron and photon collisions with atoms, ions and molecules. During the last thirty-four years a series of related R-matrix program packages have been published periodically in CPC. These packages are primarily concerned with low-energy scattering where the incident energy is insufficient to ionise the target. In this paper we describe 2DRMP, a suite of two-dimensional R-matrix propagation programs aimed at creating virtual experiments on high performance and grid architectures to enable the study of electron scattering from H-like atoms and ions at intermediate energies. Program summaryProgram title: 2DRMP Catalogue identifier: AEEA_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEA_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 196 717 No. of bytes in distributed program, including test data, etc.: 3 819 727 Distribution format: tar.gz Programming language: Fortran 95, MPI Computer: Tested on CRAY XT4 [1]; IBM eServer 575 [2]; Itanium II cluster [3] Operating system: Tested on UNICOS/lc [1]; IBM AIX [2]; Red Hat Linux Enterprise AS [3] Has the code been vectorised or parallelised?: Yes. 16 cores were used for small test run Classification: 2.4 External routines: BLAS, LAPACK, PBLAS, ScaLAPACK Subprograms used: ADAZ_v1_1 Nature of problem: 2DRMP is a suite of programs aimed at creating virtual experiments on high performance architectures to enable the study of electron scattering from H-like atoms and ions at intermediate energies. Solution method: Two-dimensional R-matrix propagation theory. The (r,r) space of the internal region is subdivided into a number of subregions. Local R-matrices are constructed within each subregion and used to propagate a global R-matrix, ℜ, across the internal region. On the boundary of the internal region ℜ is transformed onto the IERM target state basis. Thus, the two-dimensional R-matrix propagation technique transforms an intractable problem into a series of tractable problems enabling the internal region to be extended far beyond that which is possible with the standard one-sector codes. A distinctive feature of the method is that both electrons are treated identically and the R-matrix basis states are constructed to allow for both electrons to be in the continuum. The subregion size is flexible and can be adjusted to accommodate the number of cores available. Restrictions: The implementation is currently restricted to electron scattering from H-like atoms and ions. Additional comments: The programs have been designed to operate on serial computers and to exploit the distributed memory parallelism found on tightly coupled high performance clusters and supercomputers. 2DRMP has been systematically and comprehensively documented using ROBODoc [4] which is an API documentation tool that works by extracting specially formatted headers from the program source code and writing them to documentation files. Running time: The wall clock running time for the small test run using 16 cores and performed on [3] is as follows: bp (7 s); rint2 (34 s); newrd (32 s); diag (21 s); amps (11 s); prop (24 s). References:HECToR, CRAY XT4 running UNICOS/lc, http://www.hector.ac.uk/, accessed 22 July, 2009. HPCx, IBM eServer 575 running IBM AIX, http://www.hpcx.ac.uk/, accessed 22 July, 2009. HP Cluster, Itanium II cluster running Red Hat Linux Enterprise AS, Queen s University Belfast, http://www.qub.ac.uk/directorates/InformationServices/Research/HighPerformanceComputing/Services/Hardware/HPResearch/, accessed 22 July, 2009. Automating Software Documentation with ROBODoc, http://www.xs4all.nl/~rfsber/Robo/, accessed 22 July, 2009.

NetView technical research

NASA Technical Reports Server (NTRS)

1993-01-01

This is the Final Technical Report for the NetView Technical Research task. This report is prepared in accordance with Contract Data Requirements List (CDRL) item A002. NetView assistance was provided and details are presented under the following headings: NetView Management Systems (NMS) project tasks; WBAFB IBM 3090; WPAFB AMDAHL; WPAFB IBM 3084; Hill AFB; McClellan AFB AMDAHL; McClellan AFB IBM 3090; and Warner-Robins AFB.

IBM PC enhances the world's future

NASA Technical Reports Server (NTRS)

Cox, Jozelle

1988-01-01

Although the purpose of this research is to illustrate the importance of computers to the public, particularly the IBM PC, present examinations will include computers developed before the IBM PC was brought into use. IBM, as well as other computing facilities, began serving the public years ago, and is continuing to find ways to enhance the existence of man. With new developments in supercomputers like the Cray-2, and the recent advances in artificial intelligence programming, the human race is gaining knowledge at a rapid pace. All have benefited from the development of computers in the world; not only have they brought new assets to life, but have made life more and more of a challenge everyday.

Issues Identified During September 2016 IBM OpenMP 4.5 Hackathon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richards, David F.

In September, 2016 IBM hosted an OpenMP 4.5 Hackathon at the TJ Watson Research Center. Teams from LLNL, ORNL, SNL, LANL, and LBNL attended the event. As with the 2015 hackathon, IBM produced an extremely useful and successful event with unmatched support from compiler team, applications staff, and facilities. Approximately 24 IBM staff supported 4-day hackathon and spent significant time 4-6 weeks out to prepare environment and become familiar with apps. This hackathon was also the first event to feature LLVM & XL C/C++ and Fortran compilers. This report records many of the issues encountered by the LLNL teams duringmore » the hackathon.« less

Diagnostic report acquisition unit for the Mayo/IBM PACS project

NASA Astrophysics Data System (ADS)

Brooks, Everett G.; Rothman, Melvyn L.

1991-07-01

The Mayo Clinic and IBM Rochester have jointly developed a picture archive and control system (PACS) for use with Mayo's MRI and Neuro-CT imaging modalities. One of the challenges of developing a useful PACS involves integrating the diagnostic reports with the electronic images so they can be displayed simultaneously. By the time a diagnostic report is generated for a particular case, its images have already been captured and archived by the PACS. To integrate the report with the images, the authors have developed an IBM Personal System/2 computer (PS/2) based diagnostic report acquisition unit (RAU). A typed copy of the report is transmitted via facsimile to the RAU where it is stacked electronically with other reports that have been sent previously but not yet processed. By processing these reports at the RAU, the information they contain is integrated with the image database and a copy of the report is archived electronically on an IBM Application System/400 computer (AS/400). When a user requests a set of images for viewing, the report is automatically integrated with the image data. By using a hot key, the user can toggle on/off the report on the display screen. This report describes process, hardware, and software employed to integrate the diagnostic report information into the PACS, including how the report images are captured, transmitted, and entered into the AS/400 database. Also described is how the archived reports and their associated medical images are located and merged for retrieval and display. The methods used to detect and process error conditions are also discussed.

Software Reviews: Programs Worth a Second Look.

ERIC Educational Resources Information Center

Classroom Computer Learning, 1989

1989-01-01

Reviews three software programs: (1) "Cartooners"--develops creative arts and animation, grades 1-6, Apple IIGS; (2) "PC Globe+"--social studies, geography, grades 4-12, IBM(384K); (3) "Wood Car Rally"--physical science, scientific method, grades 3-9, Apple II. (MVL)

Inclusion Body Myositis

PubMed Central

Barohn, Richard J.

2014-01-01

The idiopathic inflammatory myopathies (IIM) are a heterogenous group of rare disorders that share many similarities. In addition to sporadic inclusion body myositis (IBM), these include dematomyositis (DM), polymyositis (PM), and autoimmune necrotizing myopathy (NM). For discussion of later three disorders, the reader is referred to the IIM review in this issue. IBM is the most common IIM after age 50. It typically presents with chronic insidious proximal leg and/or distal arm asymmetric muscle weakness leading to recurrent falls and loss of dexterity. Creatine kinase (CK) is up to 15 times elevated in IBM and needle electromyograhy (EMG) mostly shows a chronic irritative myopathy. Muscle histopathology demonstrates endomysial inflammatory exudates surrounding and invading non-necrotic muscle fibers often times accompanied by rimmed vacuoles and protein deposits. Despite inflammatory muscle pathology suggesting similarity with PM, it likely that IBM is has a prominent degenerative component as supported by refractoriness to immunosuppressive therapy. We review the evolution of our knowledge in IBM with emphasis on recent developments in the field and discuss ongoing clinical trials. PMID:25037082

Enhancements to the IBM version of COSMIC/NASTRAN

NASA Technical Reports Server (NTRS)

Brown, W. Keith

1989-01-01

Major improvements were made to the IBM version of COSMIC/NASTRAN by RPK Corporation under contract to IBM Corporation. These improvements will become part of COSMIC's IBM version and will be available in the second quarter of 1989. The first improvement is the inclusion of code to take advantage of IBM's new Vector Facility (VF) on its 3090 machines. The remaining improvements are modifications that will benefit all users as a result of the extended addressing capability provided by the MVS/XA operating system. These improvements include the availability of an in-memory data base that potentially eliminates the need for I/O to the PRIxx disk files. Another improvement is the elimination of multiple load modules that have to be loaded for every link switch within NASTRAN. The last improvement allows for NASTRAN to execute above the 16 mega-byte line. This improvement allows for NASTRAN to have access to 2 giga-bytes of memory for open core and the in-memory data base.

Magnetic sensor technology for detecting mines, UXO, and other concealed security threats

NASA Astrophysics Data System (ADS)

Czipott, Peter V.; Iwanowski, Mark D.

1997-01-01

Magnetic sensors have been the sensor of choice in the detection and classification of buried mines and unexploded ordnance (UXO), both on land and underwater, Quantum Magnetics (QM), together with its research partner IBM, have developed a variety of advanced, very high sensitivity superconducting and room temperature magnetic sensors to meet military needs. This work has led to the development and utilization of a three-sensor gradiometer (TSG) patented by IBM, which cannot only detect, but also localize mines and ordnance. QM is also working with IBM and the U.S. Navy to develop an advanced superconducting gradiometer for buried underwater mine detection. The ability to both detect and classify buried non-metallic mines is virtually impossible with existing magnetic sensors. To solve this problem, Quantum Magnetics, building on work of the Naval Research Laboratory (NRL), is pioneering work in the development of quadrupole resonance (QR) methods which can be used to detect the explosive material directly. Based on recent laboratory work done at QM and previous work done in the U.S., Russia and the United Kingdom, we are confident that QR can be effectively applied to the non-metallic mine identification problem.

PREDICTING TURBINE STAGE PERFORMANCE

NASA Technical Reports Server (NTRS)

Boyle, R. J.

1994-01-01

This program was developed to predict turbine stage performance taking into account the effects of complex passage geometries. The method uses a quasi-3D inviscid-flow analysis iteratively coupled to calculated losses so that changes in losses result in changes in the flow distribution. In this manner the effects of both the geometry on the flow distribution and the flow distribution on losses are accounted for. The flow may be subsonic or shock-free transonic. The blade row may be fixed or rotating, and the blades may be twisted and leaned. This program has been applied to axial and radial turbines, and is helpful in the analysis of mixed flow machines. This program is a combination of the flow analysis programs MERIDL and TSONIC coupled to the boundary layer program BLAYER. The subsonic flow solution is obtained by a finite difference, stream function analysis. Transonic blade-to-blade solutions are obtained using information from the finite difference, stream function solution with a reduced flow factor. Upstream and downstream flow variables may vary from hub to shroud and provision is made to correct for loss of stagnation pressure. Boundary layer analyses are made to determine profile and end-wall friction losses. Empirical loss models are used to account for incidence, secondary flow, disc windage, and clearance losses. The total losses are then used to calculate stator, rotor, and stage efficiency. This program is written in FORTRAN IV for batch execution and has been implemented on an IBM 370/3033 under TSS with a central memory requirement of approximately 4.5 Megs of 8 bit bytes. This program was developed in 1985.

Computer Architecture for Energy Efficient SFQ

DTIC Science & Technology

2014-08-27

IBM Corporation (T.J. Watson Research Laboratory) 1101 Kitchawan Road Yorktown Heights, NY 10598 -0000 2 ABSTRACT Number of Papers published in peer...accomplished during this ARO-sponsored project at IBM Research to identify and model an energy efficient SFQ-based computer architecture. The... IBM Windsor Blue (WB), illustrated schematically in Figure 2. The basic building block of WB is a "tile" comprised of a 64-bit arithmetic logic unit

Assessment of DoD and Industry Networks for Computer Aided Logistics Support (CALS) Telecommunications.

DTIC Science & Technology

1987-06-01

International Business Machines ( IBM ) Corporation compatible synchronous terminals (2780/3780/327X), and the Federal Data Corporation (FDC) has developed...the interfaces for Burroughs look-alike asynchronous and synchronous terminals. Basically, this means that the IBM and Burroughs protocols are...and other vendor computers, such as IBM , UNIVAC, and Honeywell. The Navy has developed file transfer capabilities between Tandem and Burroughs. These

Hot Chips and Hot Interconnects for High End Computing Systems

NASA Technical Reports Server (NTRS)

Saini, Subhash

2005-01-01

I will discuss several processors: 1. The Cray proprietary processor used in the Cray X1; 2. The IBM Power 3 and Power 4 used in an IBM SP 3 and IBM SP 4 systems; 3. The Intel Itanium and Xeon, used in the SGI Altix systems and clusters respectively; 4. IBM System-on-a-Chip used in IBM BlueGene/L; 5. HP Alpha EV68 processor used in DOE ASCI Q cluster; 6. SPARC64 V processor, which is used in the Fujitsu PRIMEPOWER HPC2500; 7. An NEC proprietary processor, which is used in NEC SX-6/7; 8. Power 4+ processor, which is used in Hitachi SR11000; 9. NEC proprietary processor, which is used in Earth Simulator. The IBM POWER5 and Red Storm Computing Systems will also be discussed. The architectures of these processors will first be presented, followed by interconnection networks and a description of high-end computer systems based on these processors and networks. The performance of various hardware/programming model combinations will then be compared, based on latest NAS Parallel Benchmark results (MPI, OpenMP/HPF and hybrid (MPI + OpenMP). The tutorial will conclude with a discussion of general trends in the field of high performance computing, (quantum computing, DNA computing, cellular engineering, and neural networks).

Comparison of genetic algorithms with conjugate gradient methods

NASA Technical Reports Server (NTRS)

Bosworth, J. L.; Foo, N. Y.; Zeigler, B. P.

1972-01-01

Genetic algorithms for mathematical function optimization are modeled on search strategies employed in natural adaptation. Comparisons of genetic algorithms with conjugate gradient methods, which were made on an IBM 1800 digital computer, show that genetic algorithms display superior performance over gradient methods for functions which are poorly behaved mathematically, for multimodal functions, and for functions obscured by additive random noise. Genetic methods offer performance comparable to gradient methods for many of the standard functions.

Compositional Variations of Paleogene and Neogene Tephra From the Northern Izu-Bonin-Mariana Arc

NASA Astrophysics Data System (ADS)

Tepley, F. J., III; Barth, A. P.; Brandl, P. A.; Hickey-Vargas, R.; Jiang, F.; Kanayama, K.; Kusano, Y.; Li, H.; Marsaglia, K. M.; McCarthy, A.; Meffre, S.; Savov, I. P.; Yogodzinski, G. M.

2014-12-01

A primary objective of IODP Expedition 351 was to evaluate arc initiation processes of the Izu-Bonin-Mariana (IBM) volcanic arc and its compositional evolution through time. To this end, a single thick section of sediment overlying oceanic crust was cored in the Amami Sankaku Basin where a complete sediment record of arc inception and evolution is preserved. This sediment record includes ash and pyroclasts, deposited in fore-arc, arc, and back-arc settings, likely associated with both the ~49-25 Ma emergent IBM volcanic arc and the evolving Ryukyu-Kyushu volcanic arc. Our goal was to assess the major element evolution of the nascent and evolving IBM system using the temporally constrained record of the early and developing system. In all, more than 100 ash and tuff layers, and pyroclastic fragments were selected from temporally resolved portions of the core, and from representative fractions of the overall core ("core catcher"). The samples were prepared to determine major and minor element compositions via electron microprobe analyses. This ash and pyroclast record will allow us to 1) resolve the Paleogene evolutionary history of the northern IBM arc in greater detail; 2) determine compositional variations of this portion of the IBM arc through time; 3) compare the acquired data to an extensive whole rock and tephra dataset from other segments of the IBM arc; 4) test hypotheses of northern IBM arc evolution and the involvement of different source reservoirs; and 5) mark important stratigraphic markers associated with the Neogene volcanic history of the adjacent evolving Ryukyu-Kyushu arc.

Diversity as strategy.

PubMed

Thomas, David A

2004-09-01

IBM's turnaround in the last decade is an impressive and well-documented business story. But behind that success is a less told people story, which explains how the corporation dramatically altered its already diverse composition and created millions of dollars in new business. By the time Lou Gerstner took the helm in 1993, IBM had a long history of progressive management when it came to civil rights and equal-opportunity employment. But Gerstner felt IBM wasn't taking full advantage of a diverse market for talent, nor was it maximizing the potential of its diverse customer and employee base. So in 1995, he launched a diversity task force initiative to uncover and understand differences among people within the organization and find ways to appeal to an even broader set of employees and customers. Gerstner established a task force for each of eight constituencies: Asians; blacks; the gay, lesbian, bisexual, transgendered community; Hispanics; white men; Native Americans; people with disabilities; and women. He asked the task forces to research four questions: What does your constituency need to feel welcome and valued at IBM? What can the corporation do, in partnership with your group, to maximize your constituency's productivity? What can the corporation do to influence your constituency's buying decisions so that IBM is seen as a preferred solution provider? And with which external organizations should IBM form relationships to better understand the needs of your constituency? The answers to these questions became the basis for IBM's diversity strategy. Thomas stresses that four factors are key to implementing any major change initiative: strong support from company leaders, an employee base that is fully engaged with the initiative, management practices that are integrated and aligned with the effort, and a strong and well-articulated business case for action. All four elements have helped IBM make diversity a key corporate strategy tied to real growth.

GRID2D/3D: A computer program for generating grid systems in complex-shaped two- and three-dimensional spatial domains. Part 2: User's manual and program listing

NASA Technical Reports Server (NTRS)

Bailey, R. T.; Shih, T. I.-P.; Nguyen, H. L.; Roelke, R. J.

1990-01-01

An efficient computer program, called GRID2D/3D, was developed to generate single and composite grid systems within geometrically complex two- and three-dimensional (2- and 3-D) spatial domains that can deform with time. GRID2D/3D generates single grid systems by using algebraic grid generation methods based on transfinite interpolation in which the distribution of grid points within the spatial domain is controlled by stretching functions. All single grid systems generated by GRID2D/3D can have grid lines that are continuous and differentiable everywhere up to the second-order. Also, grid lines can intersect boundaries of the spatial domain orthogonally. GRID2D/3D generates composite grid systems by patching together two or more single grid systems. The patching can be discontinuous or continuous. For continuous composite grid systems, the grid lines are continuous and differentiable everywhere up to the second-order except at interfaces where different single grid systems meet. At interfaces where different single grid systems meet, the grid lines are only differentiable up to the first-order. For 2-D spatial domains, the boundary curves are described by using either cubic or tension spline interpolation. For 3-D spatial domains, the boundary surfaces are described by using either linear Coon's interpolation, bi-hyperbolic spline interpolation, or a new technique referred to as 3-D bi-directional Hermite interpolation. Since grid systems generated by algebraic methods can have grid lines that overlap one another, GRID2D/3D contains a graphics package for evaluating the grid systems generated. With the graphics package, the user can generate grid systems in an interactive manner with the grid generation part of GRID2D/3D. GRID2D/3D is written in FORTRAN 77 and can be run on any IBM PC, XT, or AT compatible computer. In order to use GRID2D/3D on workstations or mainframe computers, some minor modifications must be made in the graphics part of the program; no modifications are needed in the grid generation part of the program. The theory and method used in GRID2D/3D is described.

CAVE: A computer code for two-dimensional transient heating analysis of conceptual thermal protection systems for hypersonic vehicles

NASA Technical Reports Server (NTRS)

Rathjen, K. A.

1977-01-01

A digital computer code CAVE (Conduction Analysis Via Eigenvalues), which finds application in the analysis of two dimensional transient heating of hypersonic vehicles is described. The CAVE is written in FORTRAN 4 and is operational on both IBM 360-67 and CDC 6600 computers. The method of solution is a hybrid analytical numerical technique that is inherently stable permitting large time steps even with the best of conductors having the finest of mesh size. The aerodynamic heating boundary conditions are calculated by the code based on the input flight trajectory or can optionally be calculated external to the code and then entered as input data. The code computes the network conduction and convection links, as well as capacitance values, given basic geometrical and mesh sizes, for four generations (leading edges, cooled panels, X-24C structure and slabs). Input and output formats are presented and explained. Sample problems are included. A brief summary of the hybrid analytical-numerical technique, which utilizes eigenvalues (thermal frequencies) and eigenvectors (thermal mode vectors) is given along with aerodynamic heating equations that have been incorporated in the code and flow charts.

Numerical Analysis of Ginzburg-Landau Models for Superconductivity.

NASA Astrophysics Data System (ADS)

Coskun, Erhan

Thin film conventional, as well as High T _{c} superconductors of various geometric shapes placed under both uniform and variable strength magnetic field are studied using the universially accepted macroscopic Ginzburg-Landau model. A series of new theoretical results concerning the properties of solution is presented using the semi -discrete time-dependent Ginzburg-Landau equations, staggered grid setup and natural boundary conditions. Efficient serial algorithms including a novel adaptive algorithm is developed and successfully implemented for solving the governing highly nonlinear parabolic system of equations. Refinement technique used in the adaptive algorithm is based on modified forward Euler method which was also developed by us to ease the restriction on time step size for stability considerations. Stability and convergence properties of forward and modified forward Euler schemes are studied. Numerical simulations of various recent physical experiments of technological importance such as vortes motion and pinning are performed. The numerical code for solving time-dependent Ginzburg-Landau equations is parallelized using BlockComm -Chameleon and PCN. The parallel code was run on the distributed memory multiprocessors intel iPSC/860, IBM-SP1 and cluster of Sun Sparc workstations, all located at Mathematics and Computer Science Division, Argonne National Laboratory.

COMPLETE DETERMINATION OF POLARIZATION FOR A HIGH-ENERGY DEUTERON BEAM (thesis)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Button, J

1959-05-01

please delete the no. 17076<>13:017077The P/sub 1/ multigroup code was written for the IBM-704 in order to determine the accuracy of the few- group diffusion scheme with various imposed conditions and also to provide an alternate computational method when this scheme fails to be sufficiently accurate. The code solves for the spatially dependent multigroup flux, taking into account such nuclear phenomena is slowing down of neutrons resulting from elastic and inelastic scattering, the removal of neutrons resulting from epithermal capture and fission resonances, and the regeneration of fist neutrons resulting from fissioning which may occur in any of as manymore » as 80 fast multigroups or in the one thermal group. The code will accept as input a physical description of the reactor (that is: slab, cylindrical, or spherical geometry, number of points and regions, composition description group dependent boundary condition, transverse buckling, and mesh sizes) and a prepared library of nuclear properties of all the isotopes in each composition. The code will produce as output multigroup fluxes, currents, and isotopic slowing-down densities, in addition to pointwise and regionwise few-group macroscopic cross sections. (auth)« less

QUARTERLY TECHNICAL PROGRESS REPORT, JULY, AUGUST, SEPTEMBER 1966.

DTIC Science & Technology

Contents: Circuit research program; Hardware systems research; Software systems research program; Numerical methods, computer arithmetic and...artificial languages; Library automation; Illiac II service , use, and program development; IBM service , use, and program development; Problem specifications; Switching theory and logical design; General laboratory information.

β4 systematics in rare-earth and actinide nuclei: sdg interacting boson model description

NASA Astrophysics Data System (ADS)

Devi, Y. D.; Kota, V. K. B.

1992-07-01

The observed variation of hexadecupole deformation parameter β4 with mass number A in rare-earth and actinide nuclei is studied in the sdg interacting boson model (IBM) using single j-shell Otsuka-Arima-Iachello mapped and IBM-2 to IBM-1 projected hexadecupole transition operator together with SUsdg(3) and SUsdg(5) coherent states. The SUsdg(3) limit is found to provide a good description of data.

A performance evaluation of the IBM 370/XT personal computer

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Triantafyllopoulos, Spiros

1984-01-01

An evaluation of the IBM 370/XT personal computer is given. This evaluation focuses primarily on the use of the 370/XT for scientific and technical applications and applications development. A measurement of the capabilities of the 370/XT was performed by means of test programs which are presented. Also included is a review of facilities provided by the operating system (VM/PC), along with comments on the IBM 370/XT hardware configuration.

Structural Characterization of Cross-Linked Hemoglobins Developed as Potential Transfusion Substitutes

DTIC Science & Technology

1990-05-30

phase HPLC using an IBM Instruments Inc. model LC 9533 ternary liquid chromatograph attached to a model F9522 fixed UV module and a model F9523...acid analyses are done by separation and quantitation of phenylthiocarbamyl amino acid derivatives using a second IBM model LC 9533 ternary liquid...computer which controls the HPLC and an IBM Instruments Inc. model LC 9505 automatic sampler. The hemoglobin present in the effluent from large

DDN (Defense Data Network) Protocol Implementations and Vendors Guide

DTIC Science & Technology

1989-02-01

Announcement 286-259 6/16/86 MACHINE-TYPE/CPU: IBM RT/PC O/S: AIX DISTRIBUTOR: 1. IBM Marketing 2. IBM Authorized VAR’s 3. Authorized Personal Computer...Vendors Guide 12. PERSONAL AUTHOR(S) Dorio, Nan; Johnson, Marlyn; Lederman. Sol; Redfield, Elizabeth; Ward, Carol 13a. TYPE OF REPORT 13b. TIME COVERED 114...documentation, contact person , and distributor. The fourth section describes analysis tools. It includes information about network analysis products

Trajectory Reconstruction Program Milestone 2/3 Report. Volume 1. Description and Overview

DTIC Science & Technology

1974-12-16

Simulation Data Generation Missile Trajectory Error Analysis Modularized Program Guidance and Targeting Multiple Vehicle Simulation IBM 360/370 Numerical...consists of vehicle simulation subprograms designed and written in FORTRAN for CDC 6600/7600, IBM 360/370, and UNIVAC 1108/1110 series computers. The o-erall...vehicle simulation subprograms designed and written in FORTRAN fcr CDC 6600/7600, IBM 360/370, and UNIVAC l08/1110 series computers. The overall

Metrics of Software Quality.

DTIC Science & Technology

1980-11-01

Systems: A Raytheon Project History", RADC-TR-77-188, Final Technical Report, June 1977. 4. IBM Federal Systems Division, "Statistical Prediction of...147, June 1979. 4. W. D. Brooks, R. W. Motley, "Analysis of Discrete Software Reliability Models", IBM Corp., RADC-TR-80-84, RADC, New York, April 1980...J. C. King of IBM (Reference 9) and Lori A. Clark (Reference 10) of the University of Massachusetts. Programs, so exercised must be augmented so they

SIAM Data Mining Brings It’ to Annual Meeting

DTIC Science & Technology

2017-02-24

address space) languages. Jose Moreira and Manoj Kumar from IBM presented the Graph Programming Interface (GPI) as well as a proposal for a common...Samsi (MIT), Dr. Manoj Kumar (IBM Research), Dr. Michel Kinsy (Boston University), and Dr. Shashank Yellapantula (GE Global Research). Dr. Gadepally...and Dr. Samsi discussed advances in data management technologies [22–25], and Dr. Kumar presented a brief overview of a graph-based API IBM is

Interactive graphics system for IBM 1800 computer

NASA Technical Reports Server (NTRS)

Carleton, T. P.; Howell, D. R.; Mish, W. H.

1972-01-01

A FORTRAN compatible software system that has been developed to provide an interactive graphics capability for the IBM 1800 computer is described. The interactive graphics hardware consists of a Hewlett-Packard 1300A cathode ray tube, Sanders photopen, digital to analog converters, pulse counter, and necessary interface. The hardware is available from IBM as several related RPQ's. The software developed permits the application programmer to use IBM 1800 FORTRAN to develop a display on the cathode ray tube which consists of one or more independent units called pictures. The software permits a great deal of flexibility in the manipulation of these pictures and allows the programmer to use the photopen to interact with the displayed data and make decisions based on information returned by the photopen.

Redox factor-1 in muscle biopsies of patients with inclusion-body myositis.

PubMed

Broccolini, A; Engel, W K; Alvarez, R B; Askanas, V

2000-06-16

To determine whether redox factor-1 (Ref-1) participates in the pathogenesis of inclusion-body myositis (IBM), we immunolocalized Ref-1 in muscle biopsies of IBM patients by light- and electron-microscopy. Approximately 70-80% of the IBM vacuolated muscle fibers had focal inclusions strongly immunoreactive for Ref-1. By immunoelectronmicroscopy, Ref-1 was localized to paired-helical filaments, 6-10 nm amyloid-like fibrils and amorphous material. Virtually all regenerating and necrotic muscle fibers in various muscle biopsies had diffusely strong Ref-1 immunoreactivity. At all neuromuscular junctions, postsynaptically there was strong Ref-1 immunoreactivity. Our study suggests that Ref-1 plays a role in IBM pathogenesis, and in other pathologic and normal processes of human muscle.

A DNA sequence analysis package for the IBM personal computer.

PubMed Central

Lagrimini, L M; Brentano, S T; Donelson, J E

1984-01-01

We present here a collection of DNA sequence analysis programs, called "PC Sequence" (PCS), which are designed to run on the IBM Personal Computer (PC). These programs are written in IBM PC compiled BASIC and take full advantage of the IBM PC's speed, error handling, and graphics capabilities. For a modest initial expense in hardware any laboratory can use these programs to quickly perform computer analysis on DNA sequences. They are written with the novice user in mind and require very little training or previous experience with computers. Also provided are a text editing program for creating and modifying DNA sequence files and a communications program which enables the PC to communicate with and collect information from mainframe computers and DNA sequence databases. PMID:6546433

The Upper- to Middle-Crustal Section of the Alisitos Oceanic Arc, (Baja, Mexico): an Analog of the Izu-Bonin-Marianas (IBM) Arc

NASA Astrophysics Data System (ADS)

Medynski, S.; Busby, C.; DeBari, S. M.; Morris, R.; Andrews, G. D.; Brown, S. R.; Schmitt, A. K.

2016-12-01

The Rosario segment of the Cretaceous Alisitos arc in Baja California is an outstanding field analog for the Izu-Bonin-Mariana (IBM) arc, because it is structurally intact, unmetamorphosed, and has superior three-dimensional exposures of an upper- to middle-crustal section through an extensional oceanic arc. Previous work1, done in the pre-digital era, used geologic mapping to define two phases of arc evolution, with normal faulting in both phases: (1) extensional oceanic arc, with silicic calderas, and (2) oceanic arc rifting, with widespread diking and dominantly mafic effusions. Our new geochemical data match the extensional zone immediately behind the Izu arc front, and is different from the arc front and rear arc, consistent with geologic relations. Our study is developing a 3D oceanic arc crustal model, with geologic maps draped on Google Earth images, and GPS-located outcrop information linked to new geochemical, geochronological and petrographic data, with the goal of detailing the relationships between plutonic, hypabyssal, and volcanic rocks. This model will be used by scientists as a reference model for past (IBM-1, 2, 3) and proposed IBM (IBM-4) drilling activities. New single-crystal zircon analysis by TIMS supports the interpretation, based on batch SIMS analysis of chemically-abraded zircon1, that the entire upper-middle crustal section accumulated in about 1.5 Myr. Like the IBM, volcanic zircons are very sparse, but zircon chemistry on the plutonic rocks shows trace element compositions that overlap to those measured in IBM volcanic zircons by A. Schmitt (unpublished data). Zircons have U-Pb ages up to 20 Myr older than the eruptive age, suggesting remelting of older parts of the arc, similar to that proposed for IBM (using different evidence). Like IBM, some very old zircons are also present, indicating the presence of old crustal fragments, or sediments derived from them, in the basement. However, our geochemical data show that the magmas are differentiated from a single mantle source, so any older crust that was remelted had the same compositional characteristics. This is similar to previous conclusion that the different parts of the Izu arc have retained their distinct compositions over the last 15 Myr2. 1Busby et al., 2006 JVGR 149, 1-46 2 Hochstaedter et al., 2000 JGR 105, 495-512

A tale of two arcs? Plate tectonics of the Izu-Bonin-Mariana (IBM) arc using subducted slab constraints

NASA Astrophysics Data System (ADS)

Wu, J. E.; Suppe, J.; Renqi, L.; Kanda, R. V. S.

2014-12-01

Published plate reconstructions typically show the Izu-Bonin Marianas arc (IBM) forming as a result of long-lived ~50 Ma Pacific subduction beneath the Philippine Sea. These reconstructions rely on the critical assumption that the Philippine Sea was continuously coupled to the Pacific during the lifetime of the IBM arc. Because of this assumption, significant (up to 1500 km) Pacific trench retreat is required to accommodate the 2000 km of Philippine Sea/IBM northward motion since the Eocene that is constrained by paleomagnetic data. In this study, we have mapped subducted slabs of mantle lithosphere from MITP08 global seismic tomography (Li et al., 2008) and restored them to a model Earth surface to constrain plate tectonic reconstructions. Here we present two subducted slab constraints that call into question current IBM arc reconstructions: 1) The northern and central Marianas slabs form a sub-vertical 'slab wall' down to maximum 1500 km depths in the lower mantle. This slab geometry is best explained by a near-stationary Marianas trench that has remained +/- 250 km E-W of its present-day position since ~45 Ma, and does not support any significant Pacific slab retreat. 2) A vanished ocean is revealed by an extensive swath of sub-horizontal slabs at 700 to 1000 km depths in the lower mantle below present-day Philippine Sea to Papua New Guinea. We call this vanished ocean the 'East Asian Sea'. When placed in an Eocene plate reconstruction, the East Asian Sea fits west of the reconstructed Marianas Pacific trench position and north of the Philippine Sea plate. This implies that the Philippine Sea and Pacific were not adjacent at IBM initiation, but were in fact separated by a lost ocean. Here we propose a new IBM arc reconstruction constrained by subducted slabs mapped under East Asia. At ~50 Ma, the present-day IBM arc initiated at equatorial latitudes from East Asian Sea subduction below the Philippine Sea. A separate arc was formed from Pacific subduction below the East Asian Sea. The Philippine Sea plate moved northwards, overrunning the East Asian Sea and the two arcs collided between 15 to 20 Ma. From 15 Ma to the present, IBM arc magmatism was produced by Pacific subduction beneath the Philippine Sea.

Clinicopathologic features of myositis patients with CD8-MHC-1 complex pathology.

PubMed

Ikenaga, Chiseko; Kubota, Akatsuki; Kadoya, Masato; Taira, Kenichiro; Uchio, Naohiro; Hida, Ayumi; Maeda, Meiko Hashimoto; Nagashima, Yu; Ishiura, Hiroyuki; Kaida, Kenichi; Goto, Jun; Tsuji, Shoji; Shimizu, Jun

2017-09-05

To determine the clinical features of myositis patients with the histopathologic finding of CD8-positive T cells invading non-necrotic muscle fibers expressing major histocompatibility complex class 1 (CD8-MHC-1 complex), which is shared by polymyositis (PM) and inclusion body myositis (IBM), in relation to the p62 immunostaining pattern of muscle fibers. All 93 myositis patients with CD8-MHC-1 complex who were referred to our hospital from 1993 to 2015 were classified on the basis of the European Neuromuscular Center (ENMC) diagnostic criteria for IBM (Rose, 2013) or PM (Hoogendijk, 2004) and analyzed. The 93 patients included were 17 patients with PM, 70 patients with IBM, and 6 patients who neither met the criteria for PM nor IBM in terms of muscle weakness distribution (unclassifiable group). For these PM, IBM, and unclassifiable patients, their mean ages at diagnosis were 63, 70, and 64 years; autoimmune disease was present in 7 (41%), 13 (19%), and 4 (67%); hepatitis C virus infection was detected in 0%, 13 (20%), and 2 (33%); and p62 was immunopositive in 0%, 66 (94%), and 2 (33%), respectively. Of the treated patients, 11 of 16 PM patients and 4 of 6 p62-immunonegative patients in the unclassifiable group showed responses to immunotherapy, whereas all 44 patients with IBM and 2 p62-immunopositive patients in the unclassifiable group were unresponsive to immunotherapy. CD8-MHC-1 complex is present in patients with PM, IBM, or unclassifiable group. The data may serve as an argument for a trial of immunosuppressive treatment in p62-immunonegative patients with unclassifiable myositis. © 2017 American Academy of Neurology.

Design and development of an IBM/VM menu system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cazzola, D.J.

1992-10-01

This report describes a full screen menu system developed using IBM's Interactive System Productivity Facility (ISPF) and the REXX programming language. The software was developed for the 2800 IBM/VM Electrical Computer Aided Design (ECAD) system. The system was developed to deliver electronic drawing definitions to a corporate drawing release system. Although this report documents the status of the menu system when it was retired, the methodologies used and the requirements defined are very applicable to replacement systems.

List of Research Publications 1940-1980

DTIC Science & Technology

1981-10-01

comparison of the amount of tolerance for misplaced answers found in the GPO and the IBM machine-scored answer sheets. January 1942. (X6304) 1-18 A& .1...machine scoring of answer sheets. March 1942. The effect of the use of No. I pencils on the accuracy of scoring IBM answer sheets by machine. July 1942...X6427) 482 Hobbies - IBM code. 483 Relationship of Classification Test, R-I and WAC Classi- 4023 fication Test-2 for a recruiting station population

A Dimensionality Reduction Technique for Enhancing Information Context.

DTIC Science & Technology

1980-06-01

table, memory requirements for the difference arrays are based on the FORTRAN G programming languaee as implementated on an IBM 360/67. Single...the greatest amount of insight. All studies were performed on an IBM 360/67. Transformation 53 numerical results were produced as well as two...the origin to (19,19,19,19,19,19,19,19,19,l9). Two classes were generated in each case. The samples were synthetically derived using the IBM 360/57 and

IBM PC/IX operating system evaluation plan

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Granier, Martin; Hall, Philip P.; Triantafyllopoulos, Spiros

1984-01-01

An evaluation plan for the IBM PC/IX Operating System designed for IBM PC/XT computers is discussed. The evaluation plan covers the areas of performance measurement and evaluation, software facilities available, man-machine interface considerations, networking, and the suitability of PC/IX as a development environment within the University of Southwestern Louisiana NASA PC Research and Development project. In order to compare and evaluate the PC/IX system, comparisons with other available UNIX-based systems are also included.

SEI Software Engineering Education Directory.

DTIC Science & Technology

1987-02-01

Software Design and Development Gilbert. Philip Systems: CDC Cyber 170/750 CDC Cyber 170760 DEC POP 11/44 PRIME AT&T 3B5 IBM PC IBM XT IBM RT...Macintosh VAx 8300 Software System Development and Laboratory CS 480/480L U P X T Textbooks: Software Design and Development Gilbert, Philip Systems: CDC...Acting Chair (618) 692-2386 Courses: Software Design and Development CS 424 U P E Y Textbooks: Software Design and Development, Gilbert, Philip Topics

Calculation of Weibull strength parameters, Batdorf flaw density constants and related statistical quantities using PC-CARES

NASA Technical Reports Server (NTRS)

Szatmary, Steven A.; Gyekenyesi, John P.; Nemeth, Noel N.

1990-01-01

This manual describes the operation and theory of the PC-CARES (Personal Computer-Ceramic Analysis and Reliability Evaluation of Structures) computer program for the IBM PC and compatibles running PC-DOS/MS-DOR OR IBM/MS-OS/2 (version 1.1 or higher) operating systems. The primary purpose of this code is to estimate Weibull material strength parameters, the Batdorf crack density coefficient, and other related statistical quantities. Included in the manual is the description of the calculation of shape and scale parameters of the two-parameter Weibull distribution using the least-squares analysis and maximum likelihood methods for volume- and surface-flaw-induced fracture in ceramics with complete and censored samples. The methods for detecting outliers and for calculating the Kolmogorov-Smirnov and the Anderson-Darling goodness-of-fit statistics and 90 percent confidence bands about the Weibull line, as well as the techniques for calculating the Batdorf flaw-density constants are also described.

Analyzing checkpointing trends for applications on the IBM Blue Gene/P system.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naik, H.; Gupta, R.; Beckman, P.

Current petascale systems have tens of thousands of hardware components and complex system software stacks, which increase the probability of faults occurring during the lifetime of a process. Checkpointing has been a popular method of providing fault tolerance in high-end systems. While considerable research has been done to optimize checkpointing, in practice the method still involves a high-cost overhead for users. In this paper, we study the checkpointing overhead seen by applications running on leadership-class machines such as the IBM Blue Gene/P at Argonne National Laboratory. We study various applications and design a methodology to assist users in understanding andmore » choosing checkpointing frequency and reducing the overhead incurred. In particular, we study three popular applications -- the Grid-Based Projector-Augmented Wave application, the Carr-Parrinello Molecular Dynamics application, and a Nek5000 computational fluid dynamics application -- and analyze their memory usage and possible checkpointing trends on 32,768 processors of the Blue Gene/P system.« less

A method for transferring NASTRAN data between dissimilar computers. [application to CDC 6000 series, IBM 360-370 series, and Univac 1100 series computers

NASA Technical Reports Server (NTRS)

Rogers, J. L., Jr.

1973-01-01

The NASTRAN computer program is capable of executing on three different types of computers: (1) the CDC 6000 series, (2) the IBM 360-370 series, and (3) the Univac 1100 series. A typical activity requiring transfer of data between dissimilar computers is the analysis of a large structure such as the space shuttle by substructuring. Models of portions of the vehicle which have been analyzed by subcontractors using their computers must be integrated into a model of the complete structure by the prime contractor on his computer. Presently the transfer of NASTRAN matrices or tables between two different types of computers is accomplished by punched cards or a magnetic tape containing card images. These methods of data transfer do not satisfy the requirements for intercomputer data transfer associated with a substructuring activity. To provide a more satisfactory transfer of data, two new programs, RDUSER and WRTUSER, were created.

A Study of Quantitative Measurements of Programmer Productivity for Fleet Material Support Office (FMSO).

DTIC Science & Technology

1982-12-01

paper examines the various measures discussed in the literature and used in selected corpora- tions which develop software. It presents several methods ...examines the various measures discassed in the literature and used in selected corporations which develop software. It presents several methods for...HOUR .... 40 D. SELECTED INDUSrRY METHODS FOR MEASURING PRODUCTIVITY 41 _ I1. 1IBM 41.. . . . . . . . ; 2. Amdahl . . . . . . . . . . . . . . . . . . 44

Study of the NASTRAN input/output systems

NASA Technical Reports Server (NTRS)

Brown, W. K.; Schoellmann, W. F.

1977-01-01

The basic characteristics of the NASTRAN level 16 I/O subsystem are presented with particular reference to blocking/deblocking aspects, I/O methods used on the IBM, CDC, and UNIVAC machines, definition of basic NASTRAN I/O control tables, and portability of parts of the I/O subsystem to other programs outside the NASTRAN environment are included. An explanation of the IBM primary, secondary, and tertiary files defined by the data definition (DD) cards in the NASTRAN JCL procedure. The explanation is intended to enlighten users as to the purpose of these DD cards, how they relate to one another, and why there are no similar type definition cards required on the CDC and UNIVAC versions. Enhancements designed to increase overall efficiency and decrease core requirements are also recommended.

Bill Lang's contributions to acoustics at International Business Machines Corporation (IBM), signal processing, international standards, and professionalism in noise control engineering

NASA Astrophysics Data System (ADS)

Maling, George C.

2005-09-01

Bill Lang joined IBM in the late 1950s with a mandate from Thomas Watson Jr. himself to establish an acoustics program at IBM. Bill created the facilities in Poughkeepsie, developed the local program, and was the leader in having other IBM locations with development and manufacturing responsibilities construct facilities and hire staff under the Interdivisional Liaison Program. He also directed IBMs acoustics technology program. In the mid-1960s, he led an IEEE standards group in Audio and Electroacoustics, and, with the help of James Cooley, Peter Welch, and others, introduced the fast Fourier transform to the acoustics community. He was the convenor of ISO TC 43 SC1 WG6 that began writing the 3740 series of standards in the 1970s. It was his suggestion to promote professionalism in noise control engineering, and, through meetings with Leo Beranek and others, led the founding of INCE/USA in 1971. He was also a leader of the team that founded International INCE in 1974, and he served as president from 1988 until 1999.

Effect of Cilia Beat Frequency on Muco-ciliary Clearance

PubMed Central

Sedaghat, M.H.; Shahmardan, M.M.; Norouzi, M.; Heydari, M.

2016-01-01

Background: The airway surface liquid (ASL), which is a fluid layer coating the interior epithelial surface of the bronchi and bronchiolesis, plays an important defensive role against foreign particles and chemicals entering lungs. Objective: Numerical investigation has been employed to solve two-layer model consisting of mucus layer as a viscoelastic fluid and periciliary liquid layer as a Newtonian fluid to study the effects of cilia beat frequency (CBF) at various amounts of mucus properties on muco-ciliary transport problem. Methods: Hybrid finite difference-lattice Boltzmann-method (FB-LBM) has been used to solve the momentum equations and to simulate cilia forces, and also the PCL-mucus interface more accurately, immersed boundary method (IBM) has been employed. The main contribution of the current study is to use an Oldroyd-B model as the constitutive equation of mucus. Results: Our results show that increasing CBF and decreasing mucus viscosity ratio have great effects on mucus flow, but the effect of viscosity ratio is more significant. The results also illustrate that the relation between cilia beat frequency and mean mucus velocity is almost linear and it has similar behavior at different values of viscosity ratio. Conclusion: Numerical investigation based on hybrid IB-FD-LBM has been used to study the effect of CBF at various mounts of mucus viscosity ratio on the muco-ciliary clearance. The results showed that the effect of viscosity ratio on the muco-ciliary transport process is more significant compared with CBF. PMID:28144596

Microscopic derivation of IBM and structural evolution in nuclei

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nomura, Kosuke

A Hamiltonian of the interacting boson model (IBM) is derived based on the mean-field calculations with nuclear energy density functionals (EDFs). The multi-nucleon dynamics of the surface deformation is simulated in terms of the boson degrees of freedom. The interaction strengths of the IBM Hamiltonian are determined by mapping the potential energy surfaces (PESs) of a given EDF with quadrupole degrees of freedom onto the corresponding PES of IBM. A fermion-to-boson mapping for a rotational nucleus is discussed in terms of the rotational response, which reflects a specific time-dependent feature. Ground-state correlation energy is evaluated as a signature of structuralmore » evolution. Some examples resulting from the present spectroscopic calculations are shown for neutron-rich Pt, Os and W isotopes including exotic ones.« less

Modifications of the IBM personal computer synchronous communications support programs for use with the Multics

USGS Publications Warehouse

Kork, John O.

1983-01-01

Version 1.00 of the Asynchronous Communications Support supplied with the IBM Personal Computer must be modified to be used for communications with Multics. Version 2.00 can be used as supplied, but error checking and screen printing capabilities can be added by using modifications very similar to those required for Version 1.00. This paper describes and lists required programs on Multics and appropriate modifications to both Versions 1.00 and 2.00 of the programs supplied by IBM.

Applications of Multiconductor Transmission Line Theory to the Prediction of Cable Coupling. Volume 7. Digital Computer Programs for the Analysis of Multiconductor Transmission Lines

DTIC Science & Technology

1977-07-01

on an IBM 370/165 computer at The University of Kentucky using the Fortran IV, G level compiler and should be easily implemented on other computers...order as the columns of T. 3.5.3 Subroutines NROOT and EIGEN Subroutines NROOT and EIGEN are a set of subroutines from the IBM Scientific Subroutine...November 1975). [10] System/360 Scientific Subroutine Package, Version III, Fifth Edition (August 1970), IBM Corporation, Technical Publications

Transforming the Force: A Comparative Analysis of the Department of Defense’s (DOD’s) Enterprise Resource Planning (ERP) Systems

DTIC Science & Technology

2007-09-01

the smaller ERP companies that produce specialized ERPs for particular industries. Five former IBM employees founded SAP and created the first ERP...Computer Sciences Corporations (CSC), Price Waterhouse Coopers, EDS, and IBM [2]. Selecting the right integrators is critical because they are the link... IBM was chosen as the integrator for the NEMAIS pilot. 5. Pilot Results and Road Ahead Between late 1998 and early 2002, the four Navy pilots took

Careers and people

NASA Astrophysics Data System (ADS)

2009-09-01

IBM scientist wins magnetism prizes Stuart Parkin, an applied physicist at IBM's Almaden Research Center, has won the European Geophysical Society's Néel Medal and the Magnetism Award from the International Union of Pure and Applied Physics (IUPAP) for his fundamental contributions to nanodevices used in information storage. Parkin's research on giant magnetoresistance in the late 1980s led IBM to develop computer hard drives that packed 1000 times more data onto a disk; his recent work focuses on increasing the storage capacity of solid-state electronic devices.

Authoritarian Decision-Making and Alternative Patterns of Power and Influence: The Mexican IBM Case

DTIC Science & Technology

1988-05-01

34 p. 111. For a fuller treatment, see Olga Pellicer de Brody, "El Ilamado a las Inversiones extranjeras, 1953-1958," In Las Empresas Transnaclonales en ...Development, Hewlett-Packard, 27 February 1987. See also Steve Frazier, "Apple y Hewlett-Packard Contra una Empresa 100% de IBM en Mexico," Excelsior, 27...Heraldo. See "IBM Piensa Crear en Mexico una Planta de Microcomputadoras," El Heraldo, 22 January 1985. 125. Orme, ibid. 126. ibid. 127. It is just as

IODP Expedition 351 Izu-Bonin-Mariana Arc Origins: Preliminary Results

NASA Astrophysics Data System (ADS)

Ishizuka, O.; Arculus, R. J.; Bogus, K.

2014-12-01

Understanding how subduction zones initiate and continental crust forms in intraoceanic arcs requires knowledge of the inception and evolution of a representative intraoceanic arc, such as the Izu-Bonin-Mariana (IBM) Arc system. This can be obtained by exploring regions adjacent to an arc, where unequivocal pre-arc crust overlain by undisturbed arc-derived materials exists. IODP Exp. 351 (June-July 2014) specifically targeted evidence for the earliest evolution of the IBM system following inception. Site U1438 (4711 m water depth) is located in the Amami Sankaku Basin (ASB), west of the Kyushu-Palau Ridge (KPR), a paleo-IBM arc. Primary objectives of Exp. 351 were: 1) determine the nature of the crust and mantle pre-existing the IBM arc; 2) identify and model the process of subduction initiation and initial arc crust formation; 3) determine the compositional evolution of the IBM arc during the Paleogene; 4) establish geophysical properties of the ASB. Seismic reflection profiles indicate a ~1.3 km thick sediment layer overlying ~5.5 km thick igneous crust, presumed to be oceanic. This igneous crust seemed likely to be the basement of the IBM arc. Four holes were cored at Site U1438 spanning the entire sediment section and into basement. The cored interval comprises 5 units: uppermost Unit I is hemipelagic sediment with intercalated ash layers, presumably recording explosive volcanism mainly from the Ryukyu and Kyushu arcs; Units II and III host a series of volcaniclastic gravity-flow deposits, likely recording the magmatic history of the IBM Arc from arc initiation until 25 Ma; Siliceous pelagic sediment (Unit IV) underlies these deposits with minimal coarse-grained sediment input and may pre-date arc initiation. Sediment-basement contact occurs at 1461 mbsf. A basaltic lava flow section dominantly composed of plagioclase and clinopyroxene with rare chilled margins continues to the bottom of the Site (1611 mbsf). The expedition successfully recovered pre-IBM Arc basement, a volcanic and geologic record spanning pre-Arc, Arc initiation to remnant Arc stages, which permits testing for subduction initiation and subsequent Arc evolution.

Software Reviews.

ERIC Educational Resources Information Center

Bitter, Gary G., Ed.

1989-01-01

Describes three software packages: (1) "MacMendeleev"--database/graphic display for chemistry, grades 10-12, Macintosh; (2) "Geometry One: Foundations"--geometry tutorial, grades 7-12, IBM; (3) "Mathematics Exploration Toolkit"--algebra and calculus tutorial, grades 8-12, IBM. (MVL)

International Business Machines (IBM) Corporation Interim Agreement EPA Case No. 08-0113-00

EPA Pesticide Factsheets

On March 27, 2008, the United States Environmental Protection Agency (EPA), suspended International Business Machines (IBM) from receiving Federal Contracts, approved subcontracts, assistance, loans and other benefits.

Design and performance analysis of solid-propellant rocket motors using a simplified computer program

NASA Technical Reports Server (NTRS)

Sforzini, R. H.

1972-01-01

An analysis and a computer program are presented which represent a compromise between the more sophisticated programs using precise burning geometric relations and the textbook type of solutions. The program requires approximately 900 computer cards including a set of 20 input data cards required for a typical problem. The computer operating time for a single configuration is approximately 1 minute and 30 seconds on the IBM 360 computer. About l minute and l5 seconds of the time is compilation time so that additional configurations input at the same time require approximately 15 seconds each. The program uses approximately 11,000 words on the IBM 360. The program is written in FORTRAN 4 and is readily adaptable for use on a number of different computers: IBM 7044, IBM 7094, and Univac 1108.

Detailed description of the Mayo/IBM PACS

NASA Astrophysics Data System (ADS)

Gehring, Dale G.; Persons, Kenneth R.; Rothman, Melvyn L.; Salutz, James R.; Morin, Richard L.

1991-07-01

The Mayo Clinic and IBM/Rochester have jointly developed a picture archiving system (PACS) for use with Mayo's MRI and Neuro-CT imaging modalities. The system was developed to replace the imaging system's vendor-supplied magnetic tape archiving capability. The system consists of seven MR imagers and nine CT scanners, each interfaced to the PACS via IBM Personal System/2(tm) (PS/2) computers, which act as gateways from the imaging modality to the PACS network. The PAC system operates on the token-ring component of Mayo's city-wide local area network. Also on the PACS network are four optical storage subsystems used for image archival, three optical subsystems used for image retrieval, an IBM Application System/400(tm) (AS/400) computer used for database management and multiple PS/2-based image display systems and their image servers.

Mitochondrial pathology in inclusion body myositis.

PubMed

Lindgren, Ulrika; Roos, Sara; Hedberg Oldfors, Carola; Moslemi, Ali-Reza; Lindberg, Christopher; Oldfors, Anders

2015-04-01

Inclusion body myositis (IBM) is usually associated with a large number of cytochrome c oxidase (COX)-deficient muscle fibers and acquired mitochondrial DNA (mtDNA) deletions. We studied the number of COX-deficient fibers and the amount of mtDNA deletions, and if variants in nuclear genes involved in mtDNA maintenance may contribute to the occurrence of mtDNA deletions in IBM muscle. Twenty-six IBM patients were included. COX-deficient fibers were assayed by morphometry and mtDNA deletions by qPCR. POLG was analyzed in all patients by Sanger sequencing and C10orf2 (Twinkle), DNA2, MGME1, OPA1, POLG2, RRM2B, SLC25A4 and TYMP in six patients by next generation sequencing. Patients with many COX-deficient muscle fibers had a significantly higher proportion of mtDNA deletions than patients with few COX-deficient fibers. We found previously unreported variants in POLG and C10orf2 and IBM patients had a significantly higher frequency of an RRM2B variant than controls. POLG variants appeared more common in IBM patients with many COX-deficient fibers, but the difference was not statistically significant. We conclude that COX-deficient fibers in inclusion body myositis are associated with multiple mtDNA deletions. In IBM patients we found novel and also previously reported variants in genes of importance for mtDNA maintenance that warrants further studies. Copyright © 2014 Elsevier B.V. All rights reserved.

CT image biomarkers to improve patient-specific prediction of radiation-induced xerostomia and sticky saliva.

PubMed

van Dijk, Lisanne V; Brouwer, Charlotte L; van der Schaaf, Arjen; Burgerhof, Johannes G M; Beukinga, Roelof J; Langendijk, Johannes A; Sijtsema, Nanna M; Steenbakkers, Roel J H M

2017-02-01

Current models for the prediction of late patient-rated moderate-to-severe xerostomia (XER 12m ) and sticky saliva (STIC 12m ) after radiotherapy are based on dose-volume parameters and baseline xerostomia (XER base ) or sticky saliva (STIC base ) scores. The purpose is to improve prediction of XER 12m and STIC 12m with patient-specific characteristics, based on CT image biomarkers (IBMs). Planning CT-scans and patient-rated outcome measures were prospectively collected for 249 head and neck cancer patients treated with definitive radiotherapy with or without systemic treatment. The potential IBMs represent geometric, CT intensity and textural characteristics of the parotid and submandibular glands. Lasso regularisation was used to create multivariable logistic regression models, which were internally validated by bootstrapping. The prediction of XER 12m could be improved significantly by adding the IBM "Short Run Emphasis" (SRE), which quantifies heterogeneity of parotid tissue, to a model with mean contra-lateral parotid gland dose and XER base . For STIC 12m , the IBM maximum CT intensity of the submandibular gland was selected in addition to STIC base and mean dose to submandibular glands. Prediction of XER 12m and STIC 12m was improved by including IBMs representing heterogeneity and density of the salivary glands, respectively. These IBMs could guide additional research to the patient-specific response of healthy tissue to radiation dose. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

PC-based high-speed video-oculography for measuring rapid eye movements in mice.

PubMed

Sakatani, Tomoya; Isa, Tadashi

2004-05-01

We newly developed an infrared video-oculographic system for on-line tracking of the eye position in awake and head-fixed mice, with high temporal resolution (240 Hz). The system consists of a commercially available high-speed CCD camera and an image processing software written in LabVIEW run on IBM-PC with a plug-in video grabber board. This software calculates the center and area of the pupil by fitting circular function to the pupil boundary, and allows robust and stable tracking of the eye position in small animals like mice. On-line calculation is performed to obtain reasonable circular fitting of the pupil boundary even if a part of the pupil is covered with shadows or occluded by eyelids or corneal reflections. The pupil position in the 2-D video plane is converted to the rotation angle of the eyeball by estimating its rotation center based on the anatomical eyeball model. By this recording system, it is possible to perform quantitative analysis of rapid eye movements such as saccades in mice. This will provide a powerful tool for analyzing molecular basis of oculomotor and cognitive functions by using various lines of mutant mice.

Revisiting the use of the immersed-boundary lattice-Boltzmann method for simulations of suspended particles

NASA Astrophysics Data System (ADS)

Mountrakis, L.; Lorenz, E.; Hoekstra, A. G.

2017-07-01

The immersed-boundary lattice-Boltzmann method (IB-LBM) is increasingly being used in simulations of dense suspensions. These systems are computationally very expensive and can strongly benefit from lower resolutions that still maintain the desired accuracy for the quantities of interest. IB-LBM has a number of free parameters that have to be defined, often without exact knowledge of the tradeoffs, since their behavior in low resolutions is not well understood. Such parameters are the lattice constant Δ x , the number of vertices Nv, the interpolation kernel ϕ , and the LBM relaxation time τ . We investigate the effect of these IB-LBM parameters on a number of straightforward but challenging benchmarks. The systems considered are (a) the flow of a single sphere in shear flow, (b) the collision of two spheres in shear flow, and (c) the lubrication interaction of two spheres. All benchmarks are performed in three dimensions. The first two systems are used for determining two effective radii: the hydrodynamic radius rhyd and the particle interaction radius rinter. The last system is used to establish the numerical robustness of the lubrication forces, used to probe the hydrodynamic interactions in the limit of small gaps. Our results show that lower spatial resolutions result in larger hydrodynamic and interaction radii, while surface densities should be chosen above two vertices per LU2 result to prevent fluid penetration in underresolved meshes. Underresolved meshes also failed to produce the migration of particles toward the center of the domain due to lift forces in Couette flow, mostly noticeable for IBM-kernel ϕ2. Kernel ϕ4, despite being more robust toward mesh resolution, produces a notable membrane thickness, leading to the breakdown of the lubrication forces in larger gaps, and its use in dense suspensions where the mean particle distances are small can result in undesired behavior. rhyd is measured to be different from rinter, suggesting that there is no consistent measure to recalibrate the radius of the suspended particle.

Physical Properties and Seismic Structure of Izu-Bonin-Mariana Fore Arc crust: Results From IODP Expedition 352 and Comparison with Oceanic Crust

NASA Astrophysics Data System (ADS)

Christeson, G. L.; Morgan, S.; Kodaira, S.; Yamashita, M.

2015-12-01

Most of the well-preserved ophiolite complexes are believed to form in supra-subduction zone settings. One of the goals of IODP Expedition 352 was to test the supra-subduction zone ophiolite model by drilling forearc crust at the northern Izu-Bonin-Mariana (IBM) system. IBM forearc drilling successfully cored 1.22 km of volcanic lavas and underlying dikes at four sites. A surprising observation is that basement compressional velocities measured from downhole logging average ~3.0 km/s, compared to values of 5 km/s at similar basement depths at oceanic crust sites 504B and 1256D. Typically there is an inverse relationship in extrusive lavas between velocity and porosity, but downhole logging shows similar porosities for the IBM and oceanic crust sites, despite the large difference in measured compressional velocities. These observations can be explained by a difference in crack morphologies between IBM forearc and oceanic crust, with a smaller fractional area of asperity contact across cracks at EXP 352 sites than at sites 504B and 1256D. Seismic profiles at the IBM forearc image many faults, which may be related to the crack population.

Comparison of the AMDAHL 470V/6 and the IBM 370/195 using benchmarks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Snider, D.R.; Midlock, J.L.; Hinds, A.R.

1976-03-01

Six groups of jobs were run on the IBM 370/195 at the Applied Mathematics Division (AMD) of Argonne National Laboratory using the current production versions of OS/MVT 21.7 and ASP 3.1. The same jobs were then run on an AMDAHL 470V/6 at the AMDAHL manufacturing facilities in Sunnyvale, California, using the identical operating systems. Performances of the two machines are compared. Differences in the configurations were minimized. The memory size on each machine was the same, all software which had an impact on run times was the same, and the I/O configurations were as similar as possible. This allowed themore » comparison to be based on the relative performance of the two CPU's. As part of the studies preliminary to the acquisition of the IBM 195 in 1972, two of the groups of jobs had been run on a CDC 7600 by CDC personnel in Arden Hills, Minnesota, on an IBM 360/195 by IBM personnel in Poughkeepsie, New York, and on the AMD 360/50/75 production system in June, 1971. 6 figures, 9 tables.« less

A Version of the Graphics-Oriented Interactive Finite Element Time-Sharing System (GIFTS) for an IBM with CP/CMS.

DTIC Science & Technology

1982-03-01

POSTGRADUATE SCHOOL fMonterey, California THESIS A VERSION OF THE GRAPHICS-ORIENTED INTERACTIVE FINITE ELEMENT TIME-SHARING SYSTEM ( GIFTS ) FOR AN IBM...Master’s & Engineer’s active Finite Element Time-sharing System Thesis - March 1982 ( GIFTS ) for an IBM with CP/CMS 6. penromm.oOn. REPoRT MUlmiR 1. AUTHOIee...ss0in D dinuf 5W M memisi) ’A version of the Graphics-oriented, Interactive, Finite element, Time-sharing System ( GIFTS ) has been developed for, and

Study of Even-Even/Odd-Even/Odd-Odd Nuclei in Zn-Ga-Ge Region in the Proton-Neutron IBM/IBFM/IBFFM

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoshida, N.; Brant, S.; Zuffi, L.

We study the even-even, odd-even and odd-odd nuclei in the region including Zn-Ga-Ge in the proton-neutron IBM and the models derived from it: IBM2, IBFM2, IBFFM2. We describe {sup 67}Ga, {sup 65}Zn, and {sup 68}Ga by coupling odd particles to a boson core {sup 66}Zn. We also calculate the beta{sup +}-decay rates among {sup 68}Ge, {sup 68}Ga and {sup 68}Zn.

TAP II Beamforming System Software Final Report

DTIC Science & Technology

1977-05-01

3.0 IBM TAPE FORMATS......... ............. -1 • 3 . 2 C om p le x C o e f f ic i e n t 8 . *.. . o t... . . . . . . .. . . . . . . . 3 - 5 :i • 3.3...parameters. Output to the line - printer and CRT are inhibited, but the IBM tapes are written. d Li UNCLASSIFIED CONFIDENTIALI A2 2.5 (C) EDITING (U...t• •• ", .. . .. . ..•" ;"• :, • .••.•-. ~ ., ~ ,., ,~.’ " ’t••. •± CONFIDENTIAL LI 3.0 (C) IBM TAPE FORMATS (U) .B 3.1 (U) GENERAL

Ada Compiler Validation Summary Report: Certificate Number: 890420W1. 10074 International Business Machines Corporation, IBM Development System for the Ada Language MVS Ada Compiler, Version 2.1.1 IBM 4381 (Host and Target)

DTIC Science & Technology

1989-04-20

20. ARS1AAI . (Contimne on reverse side olnetessary *rwenPtif) by bfoci nur~be’) International Business Machines Corporation, IBM Development System...Number: AVF-VSR-261.0789 89-01-26-TEL Ada COMPILER VALIDATION SUMMARY REPORT: Certificate Number: 890420W1.10074 International Business Machines...computer. The compiler was tested using command scripts provided by International Business Machines Corporation and reviewed by the validation team. The

Reviews.

ERIC Educational Resources Information Center

Journal of Chemical Education, 1988

1988-01-01

Reviews three softwre packages: "Molecular Graphics on the Apple Microcomputer, Enhanced Version 2.0"; "Molecular Graphics on the IBM PC Microcomputer"; and "Molecular Animator, IBM PC Version." Packages are rated based on ease of use, subject matter content, pedagogic value, and student reaction. (CW)

Data Mining and Knowledge Discover - IBM Cognitive Alternatives for NASA KSC

NASA Technical Reports Server (NTRS)

Velez, Victor Hugo

2016-01-01

Skillful tools in cognitive computing to transform industries have been found favorable and profitable for different Directorates at NASA KSC. In this study is shown how cognitive computing systems can be useful for NASA when computers are trained in the same way as humans are to gain knowledge over time. Increasing knowledge through senses, learning and a summation of events is how the applications created by the firm IBM empower the artificial intelligence in a cognitive computing system. NASA has explored and applied for the last decades the artificial intelligence approach specifically with cognitive computing in few projects adopting similar models proposed by IBM Watson. However, the usage of semantic technologies by the dedicated business unit developed by IBM leads these cognitive computing applications to outperform the functionality of the inner tools and present outstanding analysis to facilitate the decision making for managers and leads in a management information system.

An individual-based model of zebrafish population dynamics accounting for energy dynamics.

PubMed

Beaudouin, Rémy; Goussen, Benoit; Piccini, Benjamin; Augustine, Starrlight; Devillers, James; Brion, François; Péry, Alexandre R R

2015-01-01

Developing population dynamics models for zebrafish is crucial in order to extrapolate from toxicity data measured at the organism level to biological levels relevant to support and enhance ecological risk assessment. To achieve this, a dynamic energy budget for individual zebrafish (DEB model) was coupled to an individual based model of zebrafish population dynamics (IBM model). Next, we fitted the DEB model to new experimental data on zebrafish growth and reproduction thus improving existing models. We further analysed the DEB-model and DEB-IBM using a sensitivity analysis. Finally, the predictions of the DEB-IBM were compared to existing observations on natural zebrafish populations and the predicted population dynamics are realistic. While our zebrafish DEB-IBM model can still be improved by acquiring new experimental data on the most uncertain processes (e.g. survival or feeding), it can already serve to predict the impact of compounds at the population level.

An Individual-Based Model of Zebrafish Population Dynamics Accounting for Energy Dynamics

PubMed Central

Beaudouin, Rémy; Goussen, Benoit; Piccini, Benjamin; Augustine, Starrlight; Devillers, James; Brion, François; Péry, Alexandre R. R.

2015-01-01

Developing population dynamics models for zebrafish is crucial in order to extrapolate from toxicity data measured at the organism level to biological levels relevant to support and enhance ecological risk assessment. To achieve this, a dynamic energy budget for individual zebrafish (DEB model) was coupled to an individual based model of zebrafish population dynamics (IBM model). Next, we fitted the DEB model to new experimental data on zebrafish growth and reproduction thus improving existing models. We further analysed the DEB-model and DEB-IBM using a sensitivity analysis. Finally, the predictions of the DEB-IBM were compared to existing observations on natural zebrafish populations and the predicted population dynamics are realistic. While our zebrafish DEB-IBM model can still be improved by acquiring new experimental data on the most uncertain processes (e.g. survival or feeding), it can already serve to predict the impact of compounds at the population level. PMID:25938409

Inclusion Body Myositis

PubMed Central

Dimachkie, Mazen M.; Barohn, Richard J.

2012-01-01

The idiopathic inflammatory myopathies are a group of rare disorders that share many similarities. These include dermatomyositis (DM), polymyositis (PM), necrotizing myopathy (NM), and sporadic inclusion body myositis (IBM). Inclusion body myositis is the most common idiopathic inflammatory myopathy after age 50 and it presents with chronic proximal leg and distal arm asymmetric mucle weakness. Despite similarities with PM, it is likely that IBM is primarily a degenerative disorder rather than an inflammatory muscle disease. Inclusion body myositis is associated with a modest degree of creatine kinase (CK) elevation and an abnormal electromyogram demonstrating an irritative myopathy with some chronicity. The muscle histopathology demonstrates inflammatory exudates surrounding and invading nonnecrotic muscle fibers often times accompanied by rimmed vacuoles. In this chapter, we review sporadic IBM. We also examine past, essentially negative, clinical trials in IBM and review ongoing clinical trials. For further details on DM, PM, and NM, the reader is referred to the idiopathic inflammatory myopathies chapter. PMID:23117948

Hereditary inclusion-body myopathy: clues on pathogenesis and possible therapy.

PubMed

Broccolini, Aldobrando; Gidaro, Teresa; Morosetti, Roberta; Mirabella, Massimiliano

2009-09-01

Hereditary inclusion-body myopathy (h-IBM), or distal myopathy with rimmed vacuoles (DMRV), is an autosomal recessive disorder with onset in early adult life and a progressive course leading to severe disability. h-IBM/DMRV is due to mutations of a gene (GNE) that codes for a rate-limiting enzyme in the sialic acid biosynthetic pathway. Despite the identification of the causative gene defect, it has not been unambiguously clarified how GNE gene mutations impair muscle metabolism. Although numerous studies have indicated a key role of hyposialylation of glycoproteins in h-IBM/DMRV pathogenesis, others have demonstrated new and unpredicted functions of the GNE gene, outside the sialic acid biosynthetic pathway, that may also be relevant. This review illustrates the clinical and pathologic characteristics of h-IBM/DMRV and the main clues available to date concerning the possible pathogenic mechanisms and therapeutic perspectives of this disorder.

IBM NJE protocol emulator for VAX/VMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engert, D.E.

1981-01-01

Communications software has been written at Argonne National Laboratory to enable a VAX/VMS system to participate as an end-node in a standard IBM network by emulating the Network Job Entry (NJE) protocol. NJE is actually a collection of programs that support job networking for the operating systems used on most large IBM-compatible computers (e.g., VM/370, MVS with JES2 or JES3, SVS, MVT with ASP or HASP). Files received by the VAX can be printed or saved in user-selected disk files. Files sent to the network can be routed to any node in the network for printing, punching, or job submission,more » as well as to a VM/370 user's virtual reader. Files sent from the VAX are queued and transmitted asynchronously to allow users to perform other work while files are awaiting transmission. No changes are required to the IBM software.« less

Sporadic inclusion-body myositis: conformational multifactorial ageing-related degenerative muscle disease associated with proteasomal and lysosomal inhibition, endoplasmic reticulum stress, and accumulation of amyloid-β42 oligomers and phosphorylated tau.

PubMed

Askanas, Valerie; Engel, W King

2011-04-01

The pathogenesis of sporadic inclusion-body myositis (s-IBM), the most common muscle disease of older persons, is complex and multifactorial. Both the muscle fiber degeneration and the mononuclear-cell inflammation are components of the s-IBM pathology, but how each relates to the pathogenesis remains unsettled. We consider that the intramuscle fiber degenerative component plays the primary and the major pathogenic role leading to muscle fiber destruction and clinical weakness. In this article we review the newest research advances that provide a better understanding of the s-IBM pathogenesis. Cellular abnormalities occurring in s-IBM muscle fibers are discussed, including: several proteins that are accumulated in the form of aggregates within muscle fibers, including amyloid-β42 and its oligomers, and phosphorylated tau in the form of paired helical filaments, and we consider their putative detrimental influence; cellular mechanisms leading to protein misfolding and aggregation, including evidence of their inadequate disposal; pathogenic importance of endoplasmic reticulum stress and the unfolded protein response demonstrated in s-IBM muscle fibers; and decreased deacetylase activity of SIRT1. All these factors are combined with, and perhaps provoked by, an ageing intracellular milieu. Also discussed are the intriguing phenotypic similarities between s-IBM muscle fibers and the brains of Alzheimer and Parkinson's disease patients, the two most common neurodegenerative diseases associated with ageing. Muscle biopsy diagnostic criteria are also described and illustrated. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

The ER-bound RING finger protein 5 (RNF5/RMA1) causes degenerative myopathy in transgenic mice and is deregulated in inclusion body myositis.

PubMed

Delaunay, Agnès; Bromberg, Kenneth D; Hayashi, Yukiko; Mirabella, Massimiliano; Burch, Denise; Kirkwood, Brian; Serra, Carlo; Malicdan, May C; Mizisin, Andrew P; Morosetti, Roberta; Broccolini, Aldobrando; Guo, Ling T; Jones, Stephen N; Lira, Sergio A; Puri, Pier Lorenzo; Shelton, G Diane; Ronai, Ze'ev

2008-02-13

Growing evidence supports the importance of ubiquitin ligases in the pathogenesis of muscular disorders, although underlying mechanisms remain largely elusive. Here we show that the expression of RNF5 (aka RMA1), an ER-anchored RING finger E3 ligase implicated in muscle organization and in recognition and processing of malfolded proteins, is elevated and mislocalized to cytoplasmic aggregates in biopsies from patients suffering from sporadic-Inclusion Body Myositis (sIBM). Consistent with these findings, an animal model for hereditary IBM (hIBM), but not their control littermates, revealed deregulated expression of RNF5. Further studies for the role of RNF5 in the pathogenesis of s-IBM and more generally in muscle physiology were performed using RNF5 transgenic and KO animals. Transgenic mice carrying inducible expression of RNF5, under control of beta-actin or muscle specific promoter, exhibit an early onset of muscle wasting, muscle degeneration and extensive fiber regeneration. Prolonged expression of RNF5 in the muscle also results in the formation of fibers containing congophilic material, blue-rimmed vacuoles and inclusion bodies. These phenotypes were associated with altered expression and activity of ER chaperones, characteristic of myodegenerative diseases such as s-IBM. Conversely, muscle regeneration and induction of ER stress markers were delayed in RNF5 KO mice subjected to cardiotoxin treatment. While supporting a role for RNF5 Tg mice as model for s-IBM, our study also establishes the importance of RNF5 in muscle physiology and its deregulation in ER stress associated muscular disorders.

The ER-Bound RING Finger Protein 5 (RNF5/RMA1) Causes Degenerative Myopathy in Transgenic Mice and Is Deregulated in Inclusion Body Myositis

PubMed Central

Delaunay, Agnès; Bromberg, Kenneth D.; Hayashi, Yukiko; Mirabella, Massimiliano; Burch, Denise; Kirkwood, Brian; Serra, Carlo; Malicdan, May C.; Mizisin, Andrew P.; Morosetti, Roberta; Broccolini, Aldobrando; Guo, Ling T.; Jones, Stephen N.; Lira, Sergio A.; Puri, Pier Lorenzo; Shelton, G. Diane; Ronai, Ze'ev

2008-01-01

Growing evidence supports the importance of ubiquitin ligases in the pathogenesis of muscular disorders, although underlying mechanisms remain largely elusive. Here we show that the expression of RNF5 (aka RMA1), an ER-anchored RING finger E3 ligase implicated in muscle organization and in recognition and processing of malfolded proteins, is elevated and mislocalized to cytoplasmic aggregates in biopsies from patients suffering from sporadic-Inclusion Body Myositis (sIBM). Consistent with these findings, an animal model for hereditary IBM (hIBM), but not their control littermates, revealed deregulated expression of RNF5. Further studies for the role of RNF5 in the pathogenesis of s-IBM and more generally in muscle physiology were performed using RNF5 transgenic and KO animals. Transgenic mice carrying inducible expression of RNF5, under control of β-actin or muscle specific promoter, exhibit an early onset of muscle wasting, muscle degeneration and extensive fiber regeneration. Prolonged expression of RNF5 in the muscle also results in the formation of fibers containing congophilic material, blue-rimmed vacuoles and inclusion bodies. These phenotypes were associated with altered expression and activity of ER chaperones, characteristic of myodegenerative diseases such as s-IBM. Conversely, muscle regeneration and induction of ER stress markers were delayed in RNF5 KO mice subjected to cardiotoxin treatment. While supporting a role for RNF5 Tg mice as model for s-IBM, our study also establishes the importance of RNF5 in muscle physiology and its deregulation in ER stress associated muscular disorders. PMID:18270596

External audio for IBM-compatible computers

NASA Technical Reports Server (NTRS)

Washburn, David A.

1992-01-01

Numerous applications benefit from the presentation of computer-generated auditory stimuli at points discontiguous with the computer itself. Modification of an IBM-compatible computer for use of an external speaker is relatively easy but not intuitive. This modification is briefly described.

The Computer Bulletin Board.

ERIC Educational Resources Information Center

Batt, Russell H., Ed.

1989-01-01

Describes two chemistry computer programs: (1) "Eureka: A Chemistry Problem Solver" (problem files may be written by the instructor, MS-DOS 2.0, IBM with 384K); and (2) "PC-File+" (database management, IBM with 416K and two floppy drives). (MVL)

The ϱ-ππ coupling constant in lattice gauge theory

NASA Astrophysics Data System (ADS)

Gottlieb, Steven; MacKenzie, Paul B.; Thacker, H. B.; Weingarten, Don

1984-01-01

We present a method for studying hadronic transitions in lattice gauge theory which requires computer time comparable to that required by recent hadron spectrum calculations. This method is applied to a calculation of the decay ϱ-->ππ. On leave from the Department of Physics, Indiana University, Bloomington, IN 47405, USA. Address after September 1, 1983: IBM, T.J. Watson Research Center, Yorktown Heights, NY 10598, USA.

[The importance of using the computer in treating children with strabismus and amblyopia].

PubMed

Tatarinov, S A; Amel'ianova, S G; Kashchenko, T P; Lakomkin, V I; Avuchenkova, T N; Galich, V I

1993-01-01

A method for therapy of strabismus and amblyopia with the use of IBM PC AT type computer is suggested. It consists in active interaction of a patient with various test objects on the monitor and is realized via a special set of programs. Clinical indications for the use of a new method are defined. Its use yielded good results in 82 of 97 children.

Effects of climate change on the survival of larval cod

NASA Astrophysics Data System (ADS)

Kristiansen, T.; Stock, C. A.; Drinkwater, K. F.; Curchitser, E. N.

2011-12-01

Understanding how climate change may impact important commercial fisheries is critical for developing sustainable fisheries management strategies. In this study, we used simulations from an Earth System Model (NOAA GFDL ESM2.1) coupled with an individual-based model (IBM) for larval fish to provide a first assessment of the potential importance of climate-change driven changes in primary productivity and temperature on cod recruitment in the North Atlantic to the year 2100. ESM model output was averaged for 5 regions, each with an area of 5x5 on a latitude-longitude grid, and representing the geographic boundaries of the current cod range. The physical and environmental data were incorporated into a mechanistic IBM used to simulate the critical early phases in the life of larval fish (e.g. cod) in a changing environment. Large phytoplankton production was predicted to decrease in most regions, thereby lowering the number of meso-zooplankton in the water column. Meso-zooplankton is the most important prey item for larval cod and a reduction in their numbers have strong impacts on larval cod survival. The combination of lowered prey abundance with increased energy requirement for growth and metabolism through increased temperature had a negative impact on cod recruitment in all modeled regions of the North Atlantic. The probability of survival past the larval stages was reduced with 20-30% at all five spawning grounds by the year 2100. Together, these results suggest climate change could have significant impacts on the survival of larval cod in the North Atlantic.

A Program for Calculating and Plotting Synthetic Common-Source Seismic-Reflection Traces for Multilayered Earth Models.

ERIC Educational Resources Information Center

Ramananantoandro, Ramanantsoa

1988-01-01

Presented is a description of a BASIC program to be used on an IBM microcomputer for calculating and plotting synthetic seismic-reflection traces for multilayered earth models. Discusses finding raypaths for given source-receiver offsets using the "shooting method" and calculating the corresponding travel times. (Author/CW)

Analytical Methods in Search Theory

DTIC Science & Technology

1979-11-01

X, t ) ,I pick g(x,t;E), *(x,tjc) and find the b necessary to satisfy the search equation. SOLUTION: This is an audience participation problem. It...Cnstotiaticon G11trant,’ ’I pp 2110 Path lestegsls,’ to pp., Jun IBM Iltetteol Pepsi pp., Ott 1313 (Tt o besubmitoet lot pubtinatteon l t Messino, Daidit

The Contingent Valuation Method in Public Libraries

ERIC Educational Resources Information Center

Chung, Hye-Kyung

2008-01-01

This study aims to present a new model measuring the economic value of public libraries, combining the dissonance minimizing (DM) and information bias minimizing (IBM) format in the contingent valuation (CV) surveys. The possible biases which are tied to the conventional CV surveys are reviewed. An empirical study is presented to compare the model…

Membrane Potential Simulation Program for IBM-PC-Compatible Equipment for Physiology and Biology Students.

ERIC Educational Resources Information Center

Barry, Peter H.

1990-01-01

A graphic, interactive software program that is suitable for teaching students about the measurement and ion dependence of cell membrane potentials is described. The hardware requirements, the aim of the program, how to use the program, other related programs, and its advantages over traditional methods are included. (KR)

Application of an auditory model to speech recognition.

PubMed

Cohen, J R

1989-06-01

Some aspects of auditory processing are incorporated in a front end for the IBM speech-recognition system [F. Jelinek, "Continuous speech recognition by statistical methods," Proc. IEEE 64 (4), 532-556 (1976)]. This new process includes adaptation, loudness scaling, and mel warping. Tests show that the design is an improvement over previous algorithms.

How to Get from Cupertino to Boca Raton.

ERIC Educational Resources Information Center

Troxel, Duane K.; Chiavacci, Jim

1985-01-01

Describes seven methods to transfer data from Apple computer disks to IBM computer disks and vice versa: print out data and retype; use a commercial software package, optical-character reader, homemade cable, or modem to pass or transfer data directly; pay commercial data-transfer service; or store files on mainframe and download. (MBR)

A nested mechanistic sub-study into the effect of tranexamic acid versus placebo on intracranial haemorrhage and cerebral ischaemia in isolated traumatic brain injury: study protocol for a randomised controlled trial (CRASH-3 Trial Intracranial Bleeding Mechanistic Sub-Study [CRASH-3 IBMS]).

PubMed

Mahmood, Abda; Roberts, Ian; Shakur, Haleema

2017-07-17

Tranexamic acid prevents blood clots from breaking down and reduces bleeding. However, it is uncertain whether tranexamic acid is effective in traumatic brain injury. The CRASH-3 trial is a randomised controlled trial that will examine the effect of tranexamic acid (versus placebo) on death and disability in 13,000 patients with traumatic brain injury. The CRASH-3 trial hypothesizes that tranexamic acid will reduce intracranial haemorrhage, which will reduce the risk of death. Although it is possible that tranexamic acid will reduce intracranial bleeding, there is also a potential for harm. In particular, tranexamic acid may increase the risk of cerebral thrombosis and ischaemia. The protocol detailed here is for a mechanistic sub-study nested within the CRASH-3 trial. This mechanistic sub-study aims to examine the effect of tranexamic acid (versus placebo) on intracranial bleeding and cerebral ischaemia. The CRASH-3 Intracranial Bleeding Mechanistic Sub-Study (CRASH-3 IBMS) is nested within a prospective, double-blind, multi-centre, parallel-arm randomised trial called the CRASH-3 trial. The CRASH-3 IBMS will be conducted in a cohort of approximately 1000 isolated traumatic brain injury patients enrolled in the CRASH-3 trial. In the CRASH-3 IBMS, brain scans acquired before and after randomisation are examined, using validated methods, for evidence of intracranial bleeding and cerebral ischaemia. The primary outcome is the total volume of intracranial bleeding measured on computed tomography after randomisation, adjusting for baseline bleeding volume. Secondary outcomes include progression of intracranial haemorrhage (from pre- to post-randomisation scans), new intracranial haemorrhage (seen on post- but not pre-randomisation scans), intracranial haemorrhage following neurosurgery, and new focal ischaemic lesions (seen on post-but not pre-randomisation scans). A linear regression model will examine whether receipt of the trial treatment can predict haemorrhage volume. Bleeding volumes and new ischaemic lesions will be compared across treatment groups using relative risks and 95% confidence intervals. The CRASH-3 IBMS will provide an insight into the mechanism of action of tranexamic acid in traumatic brain injury, as well as information about the risks and benefits. Evidence from this trial could inform the management of patients with traumatic brain injury. The CRASH-3 trial was prospectively registered and the CRASH-3 IBMS is an addition to the original protocol registered at the International Standard Randomised Controlled Trials registry ( ISRCTN15088122 ) 19 July 2011, and ClinicalTrials.gov on 25 July 2011 (NCT01402882).

Development of a GIFTS (Graphics-Oriented Interactive Finite-Element Time-Sharing System) Plotting Package Compatible with Either PLOT10 or IBM/DSM Graphics.

DTIC Science & Technology

1983-06-01

1D-A132 95 DEVELOPMENT OF A GIFTS (GRAPHICS ORIENTED INTERACTIVE i/i FINITE-ELEMENT TIME..(U) NAVAL POSTGRADUATE SCHOOL I MONTEREY CA T R PICKLES JUN...183 THESIS " DEVELOPMENT OF A GIFTS PLOTTING PACKAGE COMPATIBLE WITH EITHER PLOT10 OR IBM/DSM GRAPHICS by Thomas R. Pickles June 1983 Thesis Advisor: G...TYPEAFtWEPORT & PERIOD COVERED Development of GIFTS Plotting Package Bi ’s Thesis; Compatible with either PLOTl0 or June 1983 IBM/DSM Graphics 6. PERFORMING ORO

An Input Routine Using Arithmetic Statements for the IBM 704 Digital Computer

NASA Technical Reports Server (NTRS)

Turner, Don N.; Huff, Vearl N.

1961-01-01

An input routine has been designed for use with FORTRAN or SAP coded programs which are to be executed on an IBM 704 digital computer. All input to be processed by the routine is punched on IBM cards as declarative statements of the arithmetic type resembling the FORTRAN language. The routine is 850 words in length. It is capable of loading fixed- or floating-point numbers, octal numbers, and alphabetic words, and of performing simple arithmetic as indicated on input cards. Provisions have been made for rapid loading of arrays of numbers in consecutive memory locations.

Botulinum toxin alleviates dysphagia of patients with inclusion body myositis.

PubMed

Schrey, Aleksi; Airas, Laura; Jokela, Manu; Pulkkinen, Jaakko

2017-09-15

Oropharyngeal dysphagia is a disabling and undertreated symptom that often occurs in patients with sporadic inclusion body myositis (s-IBM). In this study, we examined the effect of botulinum neurotoxin A (BoNT-A) injections to the cricopharyngeus muscle (CPM) of patients with s-IBM and dysphagia. A single-center retrospective study involving 40 biopsy-proven s-IBM-patients treated in the District of Southwest Finland from 2000 to 2013. The incidence of dysphagia, rate of aspirations, rate of aspiration pneumonias and treatment results of dysphagia were analyzed. Patients treated for dysphagia were evaluated before and after surgery by video-fluoroscopy and/or using a questionnaire. Twenty-five of the 40 s-IBM patients (62.5%) experienced dysphagia. BoNT-A was injected a median of 2 times (range 1-7) in 12 patients with dysphagia. Before the injections 7 patients reported aspiration, none afterwards. The corresponding figures for aspiration pneumonia were 3 and 0. All of these patients had normal swallowing function 12months (median, range 2-60) after the last injection. BoNT-A injections to the CPM alleviate the dysphagia of s-IBM patients reversibly and appear to reduce the rate of aspiration effectively. Copyright © 2017 Elsevier B.V. All rights reserved.

Hyposialylation of neprilysin possibly affects its expression and enzymatic activity in hereditary inclusion-body myopathy muscle.

PubMed

Broccolini, Aldobrando; Gidaro, Teresa; De Cristofaro, Raimondo; Morosetti, Roberta; Gliubizzi, Carla; Ricci, Enzo; Tonali, Pietro A; Mirabella, Massimiliano

2008-05-01

Autosomal recessive hereditary inclusion-body myopathy (h-IBM) is caused by mutations of the UDP-N-acetylglucosamine 2-epimerase/N-acetylmannosamine kinase gene, a rate-limiting enzyme in the sialic acid metabolic pathway. Previous studies have demonstrated an abnormal sialylation of glycoproteins in h-IBM. h-IBM muscle shows the abnormal accumulation of proteins including amyloid-beta (Abeta). Neprilysin (NEP), a metallopeptidase that cleaves Abeta, is characterized by the presence of several N-glycosylation sites, and changes in these sugar moieties affect its stability and enzymatic activity. In the present study, we found that NEP is hyposialylated and its expression and enzymatic activity reduced in all h-IBM muscles analyzed. In vitro, the experimental removal of sialic acid by Vibrio Cholerae neuraminidase in cultured myotubes resulted in reduced expression of NEP. This was most likely because of a post-translational modification consisting in an abnormal sialylation of the protein that leads to its reduced stability. Moreover, treatment with Vibrio Cholerae neuraminidase was associated with an increased immunoreactivity for Abeta mainly in the form of distinct cytoplasmic foci within myotubes. We hypothesize that, in h-IBM muscle, hyposialylated NEP has a role in hampering the cellular Abeta clearing system, thus contributing to its abnormal accumulation within vulnerable fibers and possibly promoting muscle degeneration.

INDIVIDUAL-BASED MODELS: POWERFUL OR POWER STRUGGLE?

PubMed

Willem, L; Stijven, S; Hens, N; Vladislavleva, E; Broeckhove, J; Beutels, P

2015-01-01

Individual-based models (IBMs) offer endless possibilities to explore various research questions but come with high model complexity and computational burden. Large-scale IBMs have become feasible but the novel hardware architectures require adapted software. The increased model complexity also requires systematic exploration to gain thorough system understanding. We elaborate on the development of IBMs for vaccine-preventable infectious diseases and model exploration with active learning. Investment in IBM simulator code can lead to significant runtime reductions. We found large performance differences due to data locality. Sorting the population once, reduced simulation time by a factor two. Storing person attributes separately instead of using person objects also seemed more efficient. Next, we improved model performance up to 70% by structuring potential contacts based on health status before processing disease transmission. The active learning approach we present is based on iterative surrogate modelling and model-guided experimentation. Symbolic regression is used for nonlinear response surface modelling with automatic feature selection. We illustrate our approach using an IBM for influenza vaccination. After optimizing the parameter spade, we observed an inverse relationship between vaccination coverage and the clinical attack rate reinforced by herd immunity. These insights can be used to focus and optimise research activities, and to reduce both dimensionality and decision uncertainty.

An Object-Oriented Network-Centric Software Architecture for Physical Computing

NASA Astrophysics Data System (ADS)

Palmer, Richard

1997-08-01

Recent developments in object-oriented computer languages and infrastructure such as the Internet, Web browsers, and the like provide an opportunity to define a more productive computational environment for scientific programming that is based more closely on the underlying mathematics describing physics than traditional programming languages such as FORTRAN or C++. In this talk I describe an object-oriented software architecture for representing physical problems that includes classes for such common mathematical objects as geometry, boundary conditions, partial differential and integral equations, discretization and numerical solution methods, etc. In practice, a scientific program written using this architecture looks remarkably like the mathematics used to understand the problem, is typically an order of magnitude smaller than traditional FORTRAN or C++ codes, and hence easier to understand, debug, describe, etc. All objects in this architecture are ``network-enabled,'' which means that components of a software solution to a physical problem can be transparently loaded from anywhere on the Internet or other global network. The architecture is expressed as an ``API,'' or application programmers interface specification, with reference embeddings in Java, Python, and C++. A C++ class library for an early version of this API has been implemented for machines ranging from PC's to the IBM SP2, meaning that phidentical codes run on all architectures.

ACARA - AVAILABILITY, COST AND RESOURCE ALLOCATION

NASA Technical Reports Server (NTRS)

Viterna, L. A.

1994-01-01

ACARA is a program for analyzing availability, lifecycle cost, and resource scheduling. It uses a statistical Monte Carlo method to simulate a system's capacity states as well as component failure and repair. Component failures are modelled using a combination of exponential and Weibull probability distributions. ACARA schedules component replacement to achieve optimum system performance. The scheduling will comply with any constraints on component production, resupply vehicle capacity, on-site spares, or crew manpower and equipment. ACARA is capable of many types of analyses and trade studies because of its integrated approach. It characterizes the system performance in terms of both state availability and equivalent availability (a weighted average of state availability). It can determine the probability of exceeding a capacity state to assess reliability and loss of load probability. It can also evaluate the effect of resource constraints on system availability and lifecycle cost. ACARA interprets the results of a simulation and displays tables and charts for: (1) performance, i.e., availability and reliability of capacity states, (2) frequency of failure and repair, (3) lifecycle cost, including hardware, transportation, and maintenance, and (4) usage of available resources, including mass, volume, and maintenance man-hours. ACARA incorporates a user-friendly, menu-driven interface with full screen data entry. It provides a file management system to store and retrieve input and output datasets for system simulation scenarios. ACARA is written in APL2 using the APL2 interpreter for IBM PC compatible systems running MS-DOS. Hardware requirements for the APL2 system include 640K of RAM, 2Mb of extended memory, and an 80386 or 80486 processor with an 80x87 math co-processor. A dot matrix printer is required if the user wishes to print a graph from a results table. A sample MS-DOS executable is provided on the distribution medium. The executable contains licensed material from the APL2 for the IBM PC product which is program property of IBM; Copyright IBM Corporation 1988 - All rights reserved. It is distributed with IBM's permission. The standard distribution medium for this program is a set of three 5.25 inch 360K MS-DOS format diskettes. The contents of the diskettes are compressed using the PKWARE archiving tools. The utility to unarchive the files, PKUNZIP.EXE, is included. ACARA was developed in 1992.

[The accuracy of the causes of death and the estimated trend: the case of cervix uteri].

PubMed

Mancuso, Pamela; Sacchettini, Claudio; Vicentini, Massimo; Caroli, Stefania; Giorgi Rossi, Paolo

2016-01-01

reduction in cervical cancer mortality is the ultimate goal of the screening. Quality of death certificate reports has been improved over time, but they are still inaccurate, making it difficult to assess time trends in mortality. to evaluate the accuracy of the topographic coding of causes of death and to estimate the mortality time trend for cervical cancer through the method of incidence-based mortality (IBM) using cancer registry (CR) data. from the mortality registry (MR), we extracted data on deaths for cervix uteri cancer, corpus uteri cancer, and uterus cancer not otherwise specified (NOS) referred to residents in Reggio Emilia (Emilia-Romagna Region, Northern Italy) from 1997 to 2013. Deaths were checked with the CR to verify the topographical site of the primary tumour. Furthermore, by using CR data, we constructed a cohort of incident cervical cancer cases diagnosed between 1997 and 2009 with a 5-year follow-up. We calculated cause-specific IBM (excluding ovary) and IBM for all cause, crude and standardized, and annual percentage change (APC). out of 369 deaths for uterine cancer, 269 were reported in the RT: 32 for cervix uteri cancer, 76 for corpus uteri cancer, 161 for uterus cancer NOS. 28 of the 32 persons who died for cervical cancer were incidents for cervix uteri cancer. 63 of the 76 who died for corpus uteri cancer were incidents for corpus uteri cancer. Of the 161 who died of uterus cancer NOS, 80 were incidents for corpus uteri cancer, 45 for cervix uteri cancer, 28 for uterus cancer NOS, 5 for vagina cancer, and 3 for cancer of other non-specified organs. Applying these proportions of misclassification, we can estimate that the real number of cervical cancer deaths is 2.4 folds the number of cases reported in the MR as cervical cancer. IBM for all causes decreased significantly over the years (APC: -9.5; 95%CI -17.1;-1.1); cause-specific IBM decreases, but not significantly (APC: -5.1; 95%IC -16.1;+7.3). There is no improvement in survival (r2=0.02; p=0.6), while the incidence shows a decrease (APC: -6.6;95%CI -10.0;-3.0). mortality for cervical cancer is still underestimated by deaths certificates: for each reported case, there are other 1.4 cases that are reported with other less specific causes.

Impact of Spirituality/Religiousness on Cyber Bullying and Victimization in University Students: Mediating Effect of Emotional Intelligence.

PubMed

Yadav, Mohit; Yadav, Rohit

2018-05-22

The aim of the study was to explore the relationship between spirituality/religiousness with cyber bullying and victimization amongst Indian University students and whether emotional intelligence mediates the relationship. Data were collected from 490 University students studying in undergraduate and postgraduate courses across India. IBM AMOS was used to find reliability and validity of instruments and PROCESS macro for IBM SPSS by Preacher and Hayes (Behav Res Methods 36(4): 717-731, 2004) was used for conducting mediation analyses. Both spiritual and existential well-being were found negatively related with cyber bullying and victimization. As far as mediation goes, the negative relationships between spiritual and existential well-being with that of cyber bullying and victimization were significantly mediated by Appraisal of Self-Emotions, Appraisal of Other's Emotions and Regulation and control of Emotions dimensions of emotional intelligence. Implication and future directions are also discussed.

REMOTE: Modem Communicator Program for the IBM personal computer

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGirt, F.

1984-06-01

REMOTE, a Modem Communicator Program, was developed to provide full duplex serial communication with arbitrary remote computers via either dial-up telephone modems or direct lines. The latest version of REMOTE (documented in this report) was developed for the IBM Personal Computer.

Using IBMs to Investigate Spatially-dependent Processes in Landscape Genetics Theory

EPA Science Inventory

Much of landscape and conservation genetics theory has been derived using non-spatialmathematical models. Here, we use a mechanistic, spatially-explicit, eco-evolutionary IBM to examine the utility of this theoretical framework in landscapes with spatial structure. Our analysis...

Physical properties and seismic structure of Izu-Bonin-Mariana fore-arc crust: Results from IODP Expedition 352 and comparison with oceanic crust

NASA Astrophysics Data System (ADS)

Christeson, G. L.; Morgan, S.; Kodaira, S.; Yamashita, M.; Almeev, R. R.; Michibayashi, K.; Sakuyama, T.; Ferré, E. C.; Kurz, W.

2016-12-01

Most of the well-preserved ophiolite complexes are believed to form in suprasubduction zone (SSZ) settings. We compare physical properties and seismic structure of SSZ crust at the Izu-Bonin-Mariana (IBM) fore arc with oceanic crust drilled at Holes 504B and 1256D to evaluate the similarities of SSZ and oceanic crust. Expedition 352 basement consists of fore-arc basalt (FAB) and boninite lavas and dikes. P-wave sonic log velocities are substantially lower for the IBM fore arc (mean values 3.1-3.4 km/s) compared to Holes 504B and 1256D (mean values 5.0-5.2 km/s) at depths of 0-300 m below the sediment-basement interface. For similar porosities, lower P-wave sonic log velocities are observed at the IBM fore arc than at Holes 504B and 1256D. We use a theoretical asperity compression model to calculate the fractional area of asperity contact Af across cracks. Af values are 0.021-0.025 at the IBM fore arc and 0.074-0.080 at Holes 504B and 1256D for similar depth intervals (0-300 m within basement). The Af values indicate more open (but not necessarily wider) cracks in the IBM fore arc than for the oceanic crust at Holes 504B and 1256D, which is consistent with observations of fracturing and alteration at the Expedition 352 sites. Seismic refraction data constrain a crustal thickness of 10-15 km along the IBM fore arc. Implications and inferences are that crust-composing ophiolites formed at SSZ settings could be thick and modified after accretion, and these processes should be considered when using ophiolites as an analog for oceanic crust.

Mortality and Causes of Death in Patients with Sporadic Inclusion Body Myositis: Survey Study Based on the Clinical Experience of Specialists in Australia, Europe and the USA.

PubMed

Price, Mark A; Barghout, Victoria; Benveniste, Olivier; Christopher-Stine, Lisa; Corbett, Alastair; de Visser, Marianne; Hilton-Jones, David; Kissel, John T; Lloyd, Thomas E; Lundberg, Ingrid E; Mastaglia, Francis; Mozaffar, Tahseen; Needham, Merrilee; Schmidt, Jens; Sivakumar, Kumaraswamy; DeMuro, Carla; Tseng, Brian S

2016-03-03

There is a paucity of data on mortality and causes of death (CoDs) in patients with sporadic inclusion body myositis (sIBM), a rare, progressive, degenerative, inflammatory myopathy that typically affects those aged over 50 years. Based on patient records and expertise of clinical specialists, this study used questionnaires to evaluate physicians' views on clinical characteristics of sIBM that may impact on premature mortality and CoDs in these patients. Thirteen physicians from seven countries completed two questionnaires online between December 20, 2012 and January 15, 2013. Responses to the first questionnaire were collated and presented in the second questionnaire to seek elaboration and identify consensus. All 13 physicians completed both questionnaires, providing responses based on 585 living and 149 deceased patients under their care. Patients were reported to have experienced dysphagia (60.2%) and injurious falls (44.3%) during their disease. Over half of physicians reported that a subset of their patients with sIBM had a shortened lifespan (8/13), and agreed that bulbar dysfunction/dysphagia/oropharyngeal involvement (12/13), early-onset disease (8/13), severe symptoms (8/13), and falls (7/13) impacted lifespan. Factors related to sIBM were reported as CoDs in 40% of deceased patients. Oropharyngeal muscle dysfunction was ranked as the leading feature of sIBM that could contribute to death. The risk of premature mortality was higher than the age-matched comparison population. In the absence of data from traditional sources, this study suggests that features of sIBM may contribute to premature mortality and may be used to inform future studies.

An efficient spectral method for the simulation of dynamos in Cartesian geometry and its implementation on massively parallel computers

NASA Astrophysics Data System (ADS)

Stellmach, Stephan; Hansen, Ulrich

2008-05-01

Numerical simulations of the process of convection and magnetic field generation in planetary cores still fail to reach geophysically realistic control parameter values. Future progress in this field depends crucially on efficient numerical algorithms which are able to take advantage of the newest generation of parallel computers. Desirable features of simulation algorithms include (1) spectral accuracy, (2) an operation count per time step that is small and roughly proportional to the number of grid points, (3) memory requirements that scale linear with resolution, (4) an implicit treatment of all linear terms including the Coriolis force, (5) the ability to treat all kinds of common boundary conditions, and (6) reasonable efficiency on massively parallel machines with tens of thousands of processors. So far, algorithms for fully self-consistent dynamo simulations in spherical shells do not achieve all these criteria simultaneously, resulting in strong restrictions on the possible resolutions. In this paper, we demonstrate that local dynamo models in which the process of convection and magnetic field generation is only simulated for a small part of a planetary core in Cartesian geometry can achieve the above goal. We propose an algorithm that fulfills the first five of the above criteria and demonstrate that a model implementation of our method on an IBM Blue Gene/L system scales impressively well for up to O(104) processors. This allows for numerical simulations at rather extreme parameter values.

An International Survey of Industrial Applications of Formal Methods. Volume 2. Case Studies

DTIC Science & Technology

1993-09-30

impact of the product on IBM revenues. 4. Error rates were claimed to be below industrial average and errors were minimal to fix. Formal methods, as...critical applications. These include: 3 I I International Survey of Industrial Applications 41 i) "Software failures, particularly under first use, seem...project to add improved modelling capability. I U International Survey of Industrial Applications 93 I Design and Implementation These products are being

Maintenance of Microcomputers. Manual and Apple II Session, IBM Session.

ERIC Educational Resources Information Center

Coffey, Michael A.; And Others

This guide describes maintenance procedures for IBM and Apple personal computers, provides information on detecting and diagnosing problems, and details diagnostic programs. Included are discussions of printers, terminals, disks, disk drives, keyboards, hardware, and software. The text is supplemented by various diagrams. (EW)

An Apple for Your IBM PC--The Quadlink Board.

ERIC Educational Resources Information Center

Owen, G. Scott

1984-01-01

Describes nature and installation of the QUADLINK board which allows Apple software to be run on IBM PC microcomputers. Although programs tested ran without problems, users should test their own programs since there are some copy protection schemes that can baffle the board. (JN)

Reviews.

ERIC Educational Resources Information Center

Journal of Chemical Education, 1988

1988-01-01

Reviews two computer programs: "Molecular Graphics," which allows molecule manipulation in three-dimensional space (requiring IBM PC with 512K, EGA monitor, and math coprocessor); and "Periodic Law," a database which contains up to 20 items of information on each of the first 103 elements (Apple II or IBM PC). (MVL)

Injuries and Illnesses of Vietnam War POWs Revisited: IV. Air Force Risk Factors

DTIC Science & Technology

2017-03-22

predominantly aviators imprisoned in North Vietnam. Statistical analyses were performed using SPSS version 19. Pearson correlations were obtained...Repatriated Prisoner of War Initial Medical Evaluation Forms. Department of Defense. Washington, D.C. 5. IBM Corporation (2010). IBM SPSS Statistics for

Performance Support Case Studies from IBM.

ERIC Educational Resources Information Center

Duke-Moran, Celia; Swope, Ginger; Morariu, Janis; deKam, Peter

1999-01-01

Presents two case studies that show how IBM addressed performance support solutions and electronic learning. The first developed a performance support and expert coaching solution; the second applied performance support to reducing implementation time and total cost of ownership of enterprise resource planning systems. (Author/LRW)

Hazardous Waste Cleanup: IBM Corporation in Poughkeepsie, New York

EPA Pesticide Factsheets

This site covers approximately 423 acres, two-thirds of which is occupied by a manufacturing complex with more than 50 buildings. The land use in the area is a mix of industrial, commercial and residential. IBM is located approximately six miles south of t

Inclusion body myositis.

PubMed

Dimachkie, Mazen M; Barohn, Richard J

2012-07-01

The idiopathic inflammatory myopathies are a group of rare disorders that share many similarities. These include dermatomyositis (DM), polymyositis (PM), necrotizing myopathy (NM), and sporadic inclusion body myositis (IBM). Inclusion body myositis is the most common idiopathic inflammatory myopathy after age 50 and it presents with chronic proximal leg and distal arm asymmetric mucle weakness. Despite similarities with PM, it is likely that IBM is primarily a degenerative disorder rather than an inflammatory muscle disease. Inclusion body myositis is associated with a modest degree of creatine kinase (CK) elevation and an abnormal electromyogram demonstrating an irritative myopathy with some chronicity. The muscle histopathology demonstrates inflammatory exudates surrounding and invading nonnecrotic muscle fibers often times accompanied by rimmed vacuoles. In this chapter, we review sporadic IBM. We also examine past, essentially negative, clinical trials in IBM and review ongoing clinical trials. For further details on DM, PM, and NM, the reader is referred to the idiopathic inflammatory myopathies chapter. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

NJE; VAX-VMS IBM NJE network protocol emulator. [DEC VAX11/780; VAX-11 FORTRAN 77 (99%) and MACRO-11 (1%)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engert, D.E.; Raffenetti, C.

NJE is communications software developed to enable a VAX VMS system to participate as an end-node in a standard IBM network by emulating the Network Job Entry (NJE) protocol. NJE supports job networking for the operating systems used on most large IBM-compatible computers (e.g., VM/370, MVS with JES2 or JES3, SVS, MVT with ASP or HASP). Files received by the VAX can be printed or saved in user-selected disk files. Files sent to the network can be routed to any network node for printing, punching, or job submission, or to a VM/370 user's virtual reader. Files sent from the VAXmore » are queued and transmitted asynchronously. No changes are required to the IBM software.DEC VAX11/780; VAX-11 FORTRAN 77 (99%) and MACRO-11 (1%); VMS 2.5; VAX11/780 with DUP-11 UNIBUS interface and 9600 baud synchronous modem..« less

Goddard Space Flight Center specification for Helical-Scan 8-millimeter (mm) magnetic digital data tape cartridge

NASA Technical Reports Server (NTRS)

Perry, Jimmy L.

1992-01-01

The same kind of standard and controls are established that are currently in use for the procurement of new analog, digital, and IBM/IBM compatible 3480 tape cartridges, and 1 in wide channel video magnetic tapes. The Magnetic Tape Certification Facility (MTCF) maintains a Qualified Products List (QPL) for the procurement of new magnetic media and uses the following specifications for the QPL and Acceptance Tests: (1) NASA TM-79724 is used for the QPL and Acceptance Testing of new analog magnetic tapes; (2) NASA TM-80599 is used for the QPL and Acceptance Testing of new digital magnetic tapes; (3) NASA TM-100702 is used for the QPL and Acceptance Testing of new IBM/IBM compatible 3840 magnetic tape cartridges; and (4) NASA TM-100712 is used for the QPL and Acceptance Testing of new 1 in wide channel video magnetic tapes. This document will be used for the QPL and Acceptance Testing of new Helical Scan 8 mm digital data tape cartridges.

Making Predictions in a Changing World: The Benefits of Individual-Based Ecology

PubMed Central

Stillman, Richard A.; Railsback, Steven F.; Giske, Jarl; Berger, Uta; Grimm, Volker

2014-01-01

Ecologists urgently need a better ability to predict how environmental change affects biodiversity. We examine individual-based ecology (IBE), a research paradigm that promises better a predictive ability by using individual-based models (IBMs) to represent ecological dynamics as arising from how individuals interact with their environment and with each other. A key advantage of IBMs is that the basis for predictions—fitness maximization by individual organisms—is more general and reliable than the empirical relationships that other models depend on. Case studies illustrate the usefulness and predictive success of long-term IBE programs. The pioneering programs had three phases: conceptualization, implementation, and diversification. Continued validation of models runs throughout these phases. The breakthroughs that make IBE more productive include standards for describing and validating IBMs, improved and standardized theory for individual traits and behavior, software tools, and generalized instead of system-specific IBMs. We provide guidelines for pursuing IBE and a vision for future IBE research. PMID:26955076

Eckert, Wallace John (1902-71)

NASA Astrophysics Data System (ADS)

Murdin, P.

2000-11-01

Computer scientist and astronomer. Born in Pittsburgh, PA, Eckert was a pioneer of the use of IBM punched card equipment for astronomical calculations. As director of the US Nautical Almanac Office he introduced computer methods to calculate and print tables instead of relying on human `computers'. When, later, he became director of the Watson Scientific Computing Laboratory at Columbia Universit...

Numerical solutions of a control problem governed by functional differential equations

NASA Technical Reports Server (NTRS)

Banks, H. T.; Thrift, P. R.; Burns, J. A.; Cliff, E. M.

1978-01-01

A numerical procedure is proposed for solving optimal control problems governed by linear retarded functional differential equations. The procedure is based on the idea of 'averaging approximations', due to Banks and Burns (1975). For illustration, numerical results generated on an IBM 370/158 computer, which demonstrate the rapid convergence of the method are presented.

Mathematics Programming on the Apple II and IBM PC.

ERIC Educational Resources Information Center

Myers, Roy E.; Schneider, David I.

1987-01-01

Details the features of BASIC used in mathematics programming and provides the information needed to translate between the Apple II and IBM PC computers. Discusses inputing a user-defined function, setting scroll windows, displaying subscripts and exponents, variable names, mathematical characters and special symbols. (TW)

Desk-top publishing using IBM-compatible computers.

PubMed

Grencis, P W

1991-01-01

This paper sets out to describe one Medical Illustration Departments' experience of the introduction of computers for desk-top publishing. In this particular case, after careful consideration of all the options open, an IBM-compatible system was installed rather than the often popular choice of an Apple Macintosh.

Software Reviews: Programs Worth a Second Look.

ERIC Educational Resources Information Center

Olds, Henry F., Jr.; And Others

1988-01-01

Examines four software packages: (1) "Wordbench"--writing and word processing, grades 9-12 (IBM and Apple); (2) "Muppet Slate"--language arts, grades K-2 (Apple); (3) "Accu-Weather Forecaster"--weather analysis and forecasting, grades 3-12 (modem with IBM or Mac); and (4) "The Ripple That Changed American…

Technology for Persons with Disabilities. An Introduction.

ERIC Educational Resources Information Center

IBM, Atlanta, GA. National Support Center for Persons with Disabilities.

This paper contains an overview of technology, national support organizations, and IBM support available to persons with disabilities related to impairments affecting hearing, learning, mobility, speech or language, and vision. The information was obtained from the IBM National Support Center for Persons with Disabilities, which was created to…

Performance statistics of the FORTRAN 4 /H/ library for the IBM system/360

NASA Technical Reports Server (NTRS)

Clark, N. A.; Cody, W. J., Jr.; Hillstrom, K. E.; Thieleker, E. A.

1969-01-01

Test procedures and results for accuracy and timing tests of the basic IBM 360/50 FORTRAN 4 /H/ subroutine library are reported. The testing was undertaken to verify performance capability and as a prelude to providing some replacement routines of improved performance.

Modifying interpretation biases in body dysmorphic disorder: Evaluation of a brief computerized treatment.

PubMed

Summers, Berta J; Cougle, Jesse R

2016-12-01

Individuals meeting diagnostic criteria for body dysmorphic disorder (BDD; N = 40) were enrolled in a randomized, four-session trial comparing interpretation bias modification (IBM) training designed to target social evaluation- and appearance-related interpretation biases with a placebo control training condition (PC). Sessions took place over the course of two weeks (two sessions per week). Analyses indicated that, relative to the PC condition, IBM led to a significant increase in benign biases and reduction in threat biases at post-treatment. IBM also led to greater reductions in BDD symptoms compared to PC, though this effect was present at high but not low levels of pre-treatment BDD symptoms. Additionally, compared to PC, IBM led to lower urge to check and lower fear in response to an in vivo appearance-related stressor (having their picture taken from different angles), though the latter effect was present only among those reporting elevated fear at pre-treatment. The effects of treatment on interpretation biases and BDD symptoms were largely maintained at a one-month follow-up assessment. Moderated-mediation analyses showed that change in threat bias mediated the effect of condition on post-treatment symptoms for individuals high in pre-treatment BDD symptoms. The current study provides preliminary support for the efficacy of IBM for BDD. Copyright © 2016 Elsevier Ltd. All rights reserved.

COMCAN; COMCAN2A; system safety common cause analysis. [IBM360; CDC CYBER176,175; FORTRAN IV (30%) and BAL (70%) (IBM360), FORTRAN IV (97%) and COMPASS (3%) (CDC CYBER176)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burdick, G.R.; Wilson, J.R.

COMCAN2A and COMCAN are designed to analyze complex systems such as nuclear plants for common causes of failure. A common cause event, or common mode failure, is a secondary cause that could contribute to the failure of more than one component and violates the assumption of independence. Analysis of such events is an integral part of system reliability and safety analysis. A significant common cause event is a secondary cause common to all basic events in one or more minimal cut sets. Minimal cut sets containing events from components sharing a common location or a common link are called commonmore » cause candidates. Components share a common location if no barrier insulates any one of them from the secondary cause. A common link is a dependency among components which cannot be removed by a physical barrier (e.g., a common energy source or common maintenance instructions).IBM360;CDC CYBER176,175; FORTRAN IV (30%) and BAL (70%) (IBM360), FORTRAN IV (97%) and COMPASS (3%) (CDC CYBER176).; OS/360 (IBM360) and NOS/BE 1.4 (CDC CYBER176), NOS 1.3 (CDC CYBER175); 140K bytes of memory for COMCAN and 242K (octal) words of memory for COMCAN2A.« less

Portability studies of modular data base managers. Interim reports. [Running CDC's DATATRAN 2 on IBM 360/370 and IBM's JOSHUA on CDC computers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kopp, H.J.; Mortensen, G.A.

1978-04-01

Approximately 60% of the full CDC 6600/7600 Datatran 2.0 capability was made operational on IBM 360/370 equipment. Sufficient capability was made operational to demonstrate adequate performance for modular program linking applications. Also demonstrated were the basic capabilities and performance required to support moderate-sized data base applications and moderately active scratch input/output applications. Approximately one to two calendar years are required to develop DATATRAN 2.0 capabilities fully for the entire spectrum of applications proposed. Included in the next stage of conversion should be syntax checking and syntax conversion features that would foster greater FORTRAN compatibility between IBM and CDC developed modules.more » The batch portion of the JOSHUA Modular System, which was developed by Savannah River Laboratory to run on an IBM computer, was examined for the feasibility of conversion to run on a Control Data Corporation (CDC) computer. Portions of the JOSHUA Precompiler were changed so as to be operable on the CDC computer. The Data Manager and Batch Monitor were also examined for conversion feasibility, but no changes were made in them. It appears to be feasible to convert the batch portion of the JOSHUA Modular System to run on a CDC computer with an estimated additional two to three man-years of effort. 9 tables.« less

Plutonic rocks in the Mineoka-Setogawa ophiolitic mélange, central Japan: Fragments of middle to lower crust of the Izu-Bonin-Mariana Arc?

NASA Astrophysics Data System (ADS)

Ichiyama, Yuji; Ito, Hisatoshi; Hokanishi, Natsumi; Tamura, Akihiro; Arai, Shoji

2017-06-01

A Paleogene accretionary complex, the Mineoka-Setogawa Belt, is distributed around the Izu Collision Zone, central Japan. Plutonic rocks of gabbro, diorite and tonalite compositions are included as fragments and dykes in an ophiolitic mélange in this belt. Zircon U-Pb dating of the plutonic rocks indicates that they were formed at ca. 35 Ma simultaneously. These ages are consistent with Eocene-Oligocene tholeiite and calc-alkaline arc magmatism in the Izu-Bonin-Mariana (IBM) Arc and exclude several previous models for the origin of the Mineoka-Setogawa ophiolitic rocks. The geochemical characteristics of these plutonic rocks are similar to those of the Eocene-Oligocene IBM tholeiite and calc-alkaline volcanic rocks as well as to the accreted middle crust of the IBM Arc, the Tanzawa Plutonic Complex. Moreover, their lithology is consistent with those of the middle and lower crust of the IBM Arc estimated from the seismic velocity structure. These lines of evidence strongly indicate that the plutonic rocks in the Mineoka-Setogawa ophiolitic mélange are fragments of the middle to lower crust of the IBM Arc. Additionally, the presence of the Mineoka-Setogawa intermediate to felsic plutonic rocks supports the hypothesis that intermediate magma can form continental crust in intra-oceanic arcs.

Insulin-like growth factor I in inclusion-body myositis and human muscle cultures.

PubMed

Broccolini, Aldobrando; Ricci, Enzo; Pescatori, Mario; Papacci, Manuela; Gliubizzi, Carla; D'Amico, Adele; Servidei, Serenella; Tonali, Pietro; Mirabella, Massimiliano

2004-06-01

Possible pathogenic mechanisms of sporadic inclusion-body myositis (sIBM) include abnormal production and accumulation of amyloid beta (A beta), muscle aging, and increased oxidative stress. Insulin-like growth factor I (IGF-I), an endocrine and autocrine/paracrine trophic factor, provides resistance against A beta toxicity and oxidative stress in vitro and promotes cell survival. In this study we analyzed the IGF-I signaling pathway in sIBM muscle and found that 16.2% +/- 2.5% of nonregenerating fibers showed increased expression of IGF-I, phosphatidylinositide 3'OH-kinase, and Akt. In the majority of sIBM abnormal muscle fibers, increased IGF-I mRNA and protein correlated with the presence of A beta cytoplasmic inclusions. To investigate a possible relationship between A beta toxicity and IGF-I upregulation, normal primary muscle cultures were stimulated for 24 hours with the A beta(25-35) peptide corresponding to the biologically active domain of A beta. This induced an increase of IGF-I mRNA and protein in myotubes at 6 hours, followed by a gradual reduction thereafter. The level of phosphorylated Akt showed similar changes. We suggest that in sIBM. IGF-I overexpression represents a reactive response to A beta toxicity, possibly providing trophic support to vulnerable fibers. Understanding the signaling pathways activated by IGF-I in sIBM may lead to novel therapeutic strategies for the disease.

Features and applications of the Groove Analysis Program (GAP)

NASA Technical Reports Server (NTRS)

Ku, Jentung; Nguyen, Tu M.; Brennan, Patrick J.

1995-01-01

An IBM Personal Computer (PC) version of the Groove Analysis program (GAP) was developed to predict the steady state heat transport capability of an axially grooved heat pipe for a specified groove geometry and working fluid. In the model, the capillary limit is determined by the numerical solution of the differential equation for momentum conservation with the appropriate boundary conditions. This governing equation accounts for the hydrodynamic losses due to friction in liquid and vapor flows and due to liquid/vapor shear interaction. Back-pumping in both 0-g and 1-g is accounted for in the boundary condition at the condenser end. Slug formation in 0-g and puddle flow in 1-g are also considered in the model. At the user's discretion, the code will perform the analysis for various fluid inventories (undercharge, nominal charge, overcharge, or a fixed fluid charge) and heat pipe elevations. GAP will also calculate the minimum required heat pipe wall thickness for pressure containment at design temperatures that are greater than or lower than the critical temperature of the working fluid. This paper discusses the theory behind the development of the GAP model. It also presents the many useful and powerful capabilities of the model. Furthermore, a correlation of flight test performance data and the predictions using GAP are presented and discussed.

Transfer of numeric ASCII data files between Apple and IBM personal computers.

PubMed

Allan, R W; Bermejo, R; Houben, D

1986-01-01

Listings for programs designed to transfer numeric ASCII data files between Apple and IBM personal computers are provided with accompanying descriptions of how the software operates. Details of the hardware used are also given. The programs may be easily adapted for transferring data between other microcomputers.

Software Reviews. Programs Worth a Second Look.

ERIC Educational Resources Information Center

Schneider, Roxanne; Eiser, Leslie

1989-01-01

Reviewed are three computer software packages for use in middle/high school classrooms. Included are "MacWrite II," a word-processing program for MacIntosh computers; "Super Story Tree," a word-processing program for Apple and IBM computers; and "Math Blaster Mystery," for IBM, Apple, and Tandy computers. (CW)

76 FR 21033 - International Business Machines (IBM), Sales and Distribution Business Unit, Global Sales...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-14

... of the negative determination regarding workers' eligibility to apply for Trade Adjustment Assistance (TAA) applicable to workers and former workers of International Business Machines (IBM), Sales and... was published in the Federal Register on November 17, 2010 (75 FR 70296). The workers supply computer...

Resource Guide for Persons with Speech or Language Impairments.

ERIC Educational Resources Information Center

IBM, Atlanta, GA. National Support Center for Persons with Disabilities.

The resource guide identifies products which assist speech or language impaired individuals in accessing IBM (International Business Machine) Personal Computers or the IBM Personal System/2 family of products. An introduction provides a general overview of ways computers can help persons with speech or language handicaps. The document then…

Using ZWDOS to Communicate in Chinese on PC.

ERIC Educational Resources Information Center

Xie, Tianwei

1995-01-01

Describes the availability, installation, and use of the ZhonWen Disk Operating System (ZWDOS) to display, print, and transmit Chinese characters on conventional International Business Machines (IBM) personal computers and IBM-compatible machines. Also discussed is the use of ZWDOS to compose electronic mail messages, read newsgroups, and access…

Extreme Scale Computing Studies

DTIC Science & Technology

2010-12-01

PUBLICATION IN ACCORDANCE WITH ASSIGNED DISTRIBUTION STATEMENT. *//Signature// //Signature// KERRY HILL, Program Manager BRADLEY J ...Research Institute William Carlson Institute for Defense Analyses William Dally Stanford University Monty Denneau IBM T. J . Watson Research...for Defense Analyses William Dally, Stanford University Monty Denneau, IBM T. J . Watson Research Laboratories Paul Franzon, North Carolina State

TRAINING AND RESEARCH PROGRAM IN COMPUTER APPLICATIONS.

ERIC Educational Resources Information Center

HUNKA, S.

TO MAKE EDUCATIONAL RESEARCHERS AND TEACHERS MORE AWARE OF THE VALUES OF ELECTRONIC AUTOMATION, THIS ARTICLE PROPOSES A TRAINING-RESEARCH PROGRAM USING THE IBM 360/67 AND THE IBM 1500 COMPUTERS. PARTICIPANTS WOULD BE SELECTED FROM (1) POST-DOCTORAL AND PROFESSIONAL UNIVERSITY STAFF MEMBERS ON SABBATICAL LEAVE WHOSE MAIN INTEREST IS EDUCATIONAL…

Personal-Computer Video-Terminal Emulator

NASA Technical Reports Server (NTRS)

Buckley, R. H.; Koromilas, A.; Smith, R. M.; Lee, G. E.; Giering, E. W.

1985-01-01

OWL-1200 video terminal emulator has been written for IBM Personal Computer. The OWL-1200 is a simple user terminal with some intelligent capabilities. These capabilities include screen formatting and block transmission of data. Emulator is written in PASCAL and Assembler for the IBM Personal Computer operating under DOS 1.1.

78 FR 42804 - SST Truck Company, LLC, a Navistar, Inc. Company Including On-Site Leased Workers From Employee...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... Contract Services, Encore, International Business Machines (IBM), Akzo Nobel, US Security, ASF Logistics... Services, Encore, International Business Machines (IBM), Akzo Nobel, US Security, ASF Logistics, LLC... class 4-8 trucks. The company reports that workers leased from Encore, International Business Machines...

Administration of Computer Resources.

ERIC Educational Resources Information Center

Franklin, Gene F.

Computing at Stanford University has, until recently, been performed at one of five facilities. The Stanford hospital operates an IBM 370/135 mainly for administrative use. The university business office has an IBM 370/145 for its administrative needs and support of the medical clinic. Under the supervision of the Stanford Computation Center are…

A MAP read-routine for IBM 7094 Fortran II binary tapes

Treesearch

Robert S. Helfman

1966-01-01

Two MAP (Macro Assembly Program) language routines are descrived. They permit Fortran IV programs to read binary tapes generated by Fortran II programs, on the IBM 7090 and 7094 computers. One routine is for use with 7040/44-IBSYS, the other for 7090/94-IBSYS.

The IBM PC as an Online Search Machine--Part 2: Physiology for Searchers.

ERIC Educational Resources Information Center

Kolner, Stuart J.

1985-01-01

Enumerates "hardware problems" associated with use of the IBM personal computer as an online search machine: purchase of machinery, unpacking of parts, and assembly into a properly functioning computer. Components that allow transformations of computer into a search machine (combination boards, printer, modem) and diagnostics software…

Quantitative Methods for Analysing Joint Questionnaire Data: Exploring the Role of Joint in Force Design

DTIC Science & Technology

2015-08-01

the nine questions. The Statistical Package for the Social Sciences ( SPSS ) [11] was used to conduct statistical analysis on the sample. Two types...constructs. SPSS was again used to conduct statistical analysis on the sample. This time factor analysis was conducted. Factor analysis attempts to...Business Research Methods and Statistics using SPSS . P432. 11 IBM SPSS Statistics . (2012) 12 Burns, R.B., Burns, R.A. (2008) ‘Business Research

Users' manual for computer program for one-dimensional analysis of coupled-cavity traveling wave tubes

NASA Technical Reports Server (NTRS)

Omalley, T. A.; Connolly, D. J.

1977-01-01

The use of the coupled cavity traveling wave tube for space communications has led to an increased interest in improving the efficiency of the basic interaction process in these devices through velocity resynchronization and other methods. To analyze these methods, a flexible, large signal computer program for use on the IBM 360/67 time-sharing system has been developed. The present report is a users' manual for this program.

High resolution frequency analysis techniques with application to the redshift experiment

NASA Technical Reports Server (NTRS)

Decher, R.; Teuber, D.

1975-01-01

High resolution frequency analysis methods, with application to the gravitational probe redshift experiment, are discussed. For this experiment a resolution of .00001 Hz is required to measure a slowly varying, low frequency signal of approximately 1 Hz. Major building blocks include fast Fourier transform, discrete Fourier transform, Lagrange interpolation, golden section search, and adaptive matched filter technique. Accuracy, resolution, and computer effort of these methods are investigated, including test runs on an IBM 360/65 computer.

IBM, Elsevier Science, and academic freedom.

PubMed

Bailar, John C; Cicolella, Andre; Harrison, Robert; LaDou, Joseph; Levy, Barry S; Rohm, Timothy; Teitelbaum, Daniel T; Wang, Yung-Der; Watterson, Andrew; Yoshida, Fumikazu

2007-01-01

Elsevier Science refused to publish a study of IBM workers that IBM sought to keep from public view. Occupational and environmental health (OEH) suffers from the absence of a level playing field on which science can thrive. Industry pays for a substantial portion of OEH research. Studies done by private consulting firms or academic institutions may be published if the results suit the sponsoring companies, or they may be censored. OEH journals often reflect the dominance of industry influence on research in the papers they publish, sometimes withdrawing or modifying papers in line with industry and advertising agendas. Although such practices are widely recognized, no fundamental change is supported by government and industry or by professional organizations.

High Resolution Displays In The Apple Macintosh And IBM PC Environments

NASA Astrophysics Data System (ADS)

Winegarden, Steven

1989-07-01

High resolution displays are one of the key elements that distinguish user oriented document finishing or publishing stations. A number of factors have been involved in bringing these to the desktop environment. At Sigma Designs we have concentrated on enhancing the capabilites of IBM PCs and compatibles and Apple Macintosh computer systems.

Hazardous Waste Cleanup: IBM Corporation, Former in Hopewell Junction, New York

EPA Pesticide Factsheets

IBM's facility is located in Hopewell Junction, New York, bordered on the north by U.S. Route 52, to the east by County Highway 27, and to the south by U.S. Route 84. There is an unnamed creek next to the surrounding open fields to the west. The 592-acre

Bringing Precision Medicine to Community Oncologists.

PubMed

2017-01-01

Quest Diagnostics has teamed up with Memorial Sloan Kettering Cancer Center and IBM Watson Health to offer IBM Watson Genomics to its network of community cancer centers and hospitals. This new service aims to advance precision medicine by combining genomic tumor sequencing with the power of cognitive computing. ©2017 American Association for Cancer Research.

The Top Six Compatibles: A Closer Look at the Machines That Are Most Compatible with the IBM PC.

ERIC Educational Resources Information Center

McMullen, Barbara E.; And Others

1984-01-01

Reviews six operationally compatible microcomputers that are most able to run IBM software without modifications--Compaq, Columbia, Corona, Hyperion, Eagle PC, and Chameleon. Information given for each includes manufacturer, uses, standard features, base list price, typical system price, and options and accessories. (MBR)

Proposed Missions and Organization of the U.S. Army Research, Development and Engineering Command

DTIC Science & Technology

2005-01-01

successfully employed in many industries and by many companies, including Pittsburgh Steel, IBM, Unilever , and Ford. Each of these organizations fine- tuned...employed by many companies, such as Pittsburgh Steel, IBM, Unilever , and Ford, which have fine-tuned the matrix to suit their particular goals and

PODIUM: Presentation Overlay Display for Interactive Uses of Media.

ERIC Educational Resources Information Center

Hofstetter, Fred T.

1989-01-01

Describes PODIUM, an educational software application that serves as a user interface to IBM's multimedia hardware. Faculty lecture outlines using IBM's InfoWindow and Audio Visual Connection (AVC) are explained for the fields of science, mathematics, music, and art, and a facility at the University of Delaware for using multimedia is described.…

Letter from Hong Kong: A Report on Chinese Food, Fake Apples, and IBM's Asian Strategy.

ERIC Educational Resources Information Center

Immel, A. Richard

1984-01-01

Notes that microcomputer use in Hong Kong's small business community does not reflect the growth of its high-tech electronics industry and discusses IBM's influence in Hong Kong and Asia, the counterfeiting of Apple microcomputers and software, and why Apple currently has no recourse. (MBR)

The Year of the Gifted Children.

ERIC Educational Resources Information Center

Kinney, Harrison

The article describes a program sponsored by International Business Machines Corporation (IBM) in which approximatey 60 children (14 to 17 years old) gifted in science spent much of 1941 after school hours in a science laboratory in IBM's showroom building. A number of these former students have achieved such positions as head of Goddard Space…

The IBM PC as an Online Search Machine. Part 5: Searching through Crosstalk.

ERIC Educational Resources Information Center

Kolner, Stuart J.

1985-01-01

This last of a five-part series on using the IBM personal computer for online searching highlights a brief review, search process, making the connection, switching between screens and modes, online transaction, capture buffer controls, coping with options, function keys, script files, processing downloaded information, note to TELEX users, and…

Linking Resarch and Practice for Site-Based School Renewal.

ERIC Educational Resources Information Center

Castle, Shari; And Others

An analysis of the IBM/NEA Mastery in Learning (MIL) school renewal system, an electronic network that involves school faculties in collegial interaction with researchers and other educators in school reform, is the purpose of this paper. Developed by IBM (International Business Machines) and NEA (National Education Association), the MIL is a…

PubMed Central

Broccolini, A.; Gidaro, T.; Morosetti, R.; Sancricca, C.; Mirabella, M.

2011-01-01

The hereditary inclusion-body myopathies encompass several syndromes with autosomal recessive or dominant inheritance. Despite a different clinical presentation they all have a progressive course leading to severe disability and share similar pathologic findings at the muscle biopsy. Quadriceps-sparing autosomal recessive hereditary inclusion-body myopathy (h-IBM) is the commonest form and is tied to mutations of the UDP-Nacetylglucosamine 2-epimerase/N-acetylmannosamine kinase (GNE) that codes for a rate-limiting enzyme in the sialic acid biosynthetic pathway. Despite the identification of the causative gene defect, it has not been clarified how mutations of the GNE gene impair muscle homeostasis. Although several lines of evidence argue in favor of an abnormal sialylation of muscle glycoproteins playing a key role in h-IBM pathogenesis, others studies have demonstrated new functions of the GNE gene, outside the sialic acid biosynthetic pathway, that may also be relevant. This review illustrates the clinical and pathologic characteristics of h- IBM and the main clues available to date concerning the possible pathogenic mechanisms of this disorder. Understanding the molecular mechanism underlying h-IBM pathology is a fundamental requisite to plan a future attempt to therapy. PMID:22106710

Microcomputer Programs for Educational Statistics: A Review of Popular Programs. TME Report 89.

ERIC Educational Resources Information Center

Stemmer, Paul M.; Berger, Carl F.

This publication acquaints the user with microcomputer statistical packages and offers a method for evaluation based on a set of criteria that can be adapted to the needs of the user. Several popular packages, typical of those available, are reviewed in detail: (1) Abstat, an easy to use command driven package compatible with the IBM PC or the…

National Commission on New Technological Uses of Copyrighted Works, Meeting Number Three (White Plains and New York, N.Y., December 18-19, 1975).

ERIC Educational Resources Information Center

Library of Congress, Washington, DC. Copyright Office.

The first day of the National Commission on New Technological Uses of Copyrighted Works' (CONTU) third meeting was spent at IBM processing headquarters, where commissioners learned about the history and terminology of computers, information storage methods, computer capabilities, computers and copyrights, future trends, and costs. On the second…

Moment Method Solutions for Radiation and Scattering from Arbitrarily Shaped Surfaces.

DTIC Science & Technology

1981-02-01

IBM -370/168. A. Monopole Antenna on a Disk The study of the monopole antenna on a circular disk is of inter- est since it leads to the understanding...34 . . ._"-", - CHAPTER V ANALYSIS OF MICRUSI- itP ANTL-NNAS This chapter will present an analysis of the microstrip antenna. Surface-patch dipole modes are used to

Efficient universal quantum channel simulation in IBM's cloud quantum computer

NASA Astrophysics Data System (ADS)

Wei, Shi-Jie; Xin, Tao; Long, Gui-Lu

2018-07-01

The study of quantum channels is an important field and promises a wide range of applications, because any physical process can be represented as a quantum channel that transforms an initial state into a final state. Inspired by the method of performing non-unitary operators by the linear combination of unitary operations, we proposed a quantum algorithm for the simulation of the universal single-qubit channel, described by a convex combination of "quasi-extreme" channels corresponding to four Kraus operators, and is scalable to arbitrary higher dimension. We demonstrated the whole algorithm experimentally using the universal IBM cloud-based quantum computer and studied the properties of different qubit quantum channels. We illustrated the quantum capacity of the general qubit quantum channels, which quantifies the amount of quantum information that can be protected. The behavior of quantum capacity in different channels revealed which types of noise processes can support information transmission, and which types are too destructive to protect information. There was a general agreement between the theoretical predictions and the experiments, which strongly supports our method. By realizing the arbitrary qubit channel, this work provides a universally- accepted way to explore various properties of quantum channels and novel prospect for quantum communication.

Schematic microscopic approach to the description of M1 transitions between mixed-symmetry and fully symmetric collective states in {gamma}-soft nuclei based on RPA-IBM boson mapping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jolos, R. V.; Shirikova, N. Yu.; Voronov, V. V.

A schematic microscopic method is developed to calculate the M1 transition probabilities between the mixed-symmetry and the fully symmetric states in {gamma}-soft nuclei. The method is based on the random-phase approximation-interacting boson model (RPA-IBM) boson mapping of the most collective isoscalar boson. All other boson modes with higher excitation energies, including the mixed-symmetry boson, are described in the framework of RPA. As an example the M1 transition probabilities are calculated for the {sup 124-134}Xe isotopes and compared with the experimental data. The results agree well with the data for the ratio B(M1;1{sub ms}{sup +}{yields}2{sub 2}{sup +})/B(M1;1{sub ms}{sup +}{yields}0{sub 1}{sup +}).more » However, the calculated ratio B(M1;2{sub ms}{sup +}{yields}2{sub 1}{sup +})/B(M1;1{sub ms}{sup +}{yields}0{sub 1}{sup +}) shows a significantly weaker dependence on the mass number than the experimental data.« less

Inclusion Body Myositis: A Case Presenting with Respiratory Failure and Autopsy Findings Leading to the Hypothesis of a Paraneoplastic Cause.

PubMed

Dardis, Christopher; Antezana, Ariel; Tanji, Kurenai; Maccabee, Paul J

2017-06-23

BACKGROUND Sporadic inclusion body myositis (IBM) is the most common acquired myopathy seen in adults aged over 50 years, with a prevalence estimated at between 1 and 70 per million. Weakness of the diaphragm with loss of vital capacity is almost universal in IBM. This is almost always asymptomatic. When respiratory complications occur, they are most often due to aspiration. Respiratory failure due to diaphragmatic weakness is exceptionally rare, particularly as the presenting symptom of the disease. It is not currently considered to be a paraneoplastic syndrome. CASE REPORT Our patient presented with hypercarbic respiratory failure. This is the first such reported case without signs of weakness elsewhere of which we are aware. We suspected IBM based on her history of progressive weakness and findings on electromyography. There was a delay of 5 years in obtaining biopsy for confirmation, during which she presented with recurrent episodes of respiratory failure despite using non-invasive ventilation. An autopsy revealed the presence of papillary thyroid carcinoma with spread to local lymph nodes. On the basis that these co-morbidities are unlikely to have occurred by chance (we estimate 1×10-17), we hypothesize that IBM may be a paraneoplastic condition. We acknowledge that proof would require demonstrating a pathogenic antibody. CONCLUSIONS IBM should be considered in older patients (age >45) presenting with otherwise unexplained respiratory failure. A workup for possible malignancy in this setting appears reasonable.

PubMed Central

MOROSETTI, R.; GLIUBIZZI, C.; BROCCOLINI, A.; SANCRICCA, C.; MIRABELLA, M.

2011-01-01

SUMMARY Mesoangioblasts are a class of adult stem cells of mesoderm origin, potentially useful for the treatment of primitive myopathies of different etiology. Extensive in vitro and in vivo studies in animal models of muscular dystrophy have demonstrated the ability of mesoangioblast to repair skeletal muscle when injected intra-arterially. In a previous work we demonstrated that mesoangioblasts obtained from diagnostic muscle biopsies of IBM patients display a defective differentiation down skeletal muscle and this block can be corrected in vitro by transient MyoD transfection. We are currently investigating different pathways involved in mesoangioblasts skeletal muscle differentiation and exploring alternative stimulatory approaches not requiring extensive cell manipulation. This will allow to obtain safe, easy and efficient molecular or pharmacological modulation of pro-myogenic pathways in IBM mesoangioblasts. It is of crucial importance to identify factors (ie. cytokines, growth factors) produced by muscle or inflammatory cells and released in the surrounding milieu that are able to regulate the differentiation ability of IBM mesoangioblasts. To promote myogenic differentiation of endogenous mesoangioblasts in IBM muscle, the modulation of such target molecules selectively dysregulated would be a more handy approach to enhance muscle regeneration compared to transplantation techniques. Studies on the biological characteristics of IBM mesoangioblasts with their aberrant differentiation behavior, the signaling pathways possibly involved in their differentiation block and the possible strategies to overcome it in vivo, might provide new insights to better understand the etiopathogenesis of this crippling disorder and to identify molecular targets susceptible of therapeutic modulation. PMID:21842589

IBM Demonstrates a General-Purpose, High-Performance, High-Availability Cloud-Hosted Data Distribution System With Live GOES-16 Weather Satellite Data

NASA Astrophysics Data System (ADS)

Snyder, P. L.; Brown, V. W.

2017-12-01

IBM has created a general purpose, data-agnostic solution that provides high performance, low data latency, high availability, scalability, and persistent access to the captured data, regardless of source or type. This capability is hosted on commercially available cloud environments and uses much faster, more efficient, reliable, and secure data transfer protocols than the more typically used FTP. The design incorporates completely redundant data paths at every level, including at the cloud data center level, in order to provide the highest assurance of data availability to the data consumers. IBM has been successful in building and testing a Proof of Concept instance on our IBM Cloud platform to receive and disseminate actual GOES-16 data as it is being downlinked. This solution leverages the inherent benefits of a cloud infrastructure configured and tuned for continuous, stable, high-speed data dissemination to data consumers worldwide at the downlink rate. It also is designed to ingest data from multiple simultaneous sources and disseminate data to multiple consumers. Nearly linear scalability is achieved by adding servers and storage.The IBM Proof of Concept system has been tested with our partners to achieve in excess of 5 Gigabits/second over public internet infrastructure. In tests with live GOES-16 data, the system routinely achieved 2.5 Gigabits/second pass-through to The Weather Company from the University of Wisconsin-Madison SSEC. Simulated data was also transferred from the Cooperative Institute for Climate and Satellites — North Carolina to The Weather Company, as well. The storage node allocated to our Proof of Concept system as tested was sized at 480 Terabytes of RAID protected disk as a worst case sizing to accommodate the data from four GOES-16 class satellites for 30 days in a circular buffer. This shows that an abundance of performance and capacity headroom exists in the IBM design that can be applied to additional missions.

Lessons from a decade of individual-based models for infectious disease transmission: a systematic review (2006-2015).

PubMed

Willem, Lander; Verelst, Frederik; Bilcke, Joke; Hens, Niel; Beutels, Philippe

2017-09-11

Individual-based models (IBMs) are useful to simulate events subject to stochasticity and/or heterogeneity, and have become well established to model the potential (re)emergence of pathogens (e.g., pandemic influenza, bioterrorism). Individual heterogeneity at the host and pathogen level is increasingly documented to influence transmission of endemic diseases and it is well understood that the final stages of elimination strategies for vaccine-preventable childhood diseases (e.g., polio, measles) are subject to stochasticity. Even so it appears IBMs for both these phenomena are not well established. We review a decade of IBM publications aiming to obtain insights in their advantages, pitfalls and rationale for use and to make recommendations facilitating knowledge transfer within and across disciplines. We systematically identified publications in Web of Science and PubMed from 2006-2015 based on title/abstract/keywords screening (and full-text if necessary) to retrieve topics, modeling purposes and general specifications. We extracted detailed modeling features from papers on established vaccine-preventable childhood diseases based on full-text screening. We identified 698 papers, which applied an IBM for infectious disease transmission, and listed these in a reference database, describing their general characteristics. The diversity of disease-topics and overall publication frequency have increased over time (38 to 115 annual publications from 2006 to 2015). The inclusion of intervention strategies (8 to 52) and economic consequences (1 to 20) are increasing, to the detriment of purely theoretical explorations. Unfortunately, terminology used to describe IBMs is inconsistent and ambiguous. We retrieved 24 studies on a vaccine-preventable childhood disease (covering 7 different diseases), with publication frequency increasing from the first such study published in 2008. IBMs have been useful to explore heterogeneous between- and within-host interactions, but combined applications are still sparse. The amount of missing information on model characteristics and study design is remarkable. IBMs are suited to combine heterogeneous within- and between-host interactions, which offers many opportunities, especially to analyze targeted interventions for endemic infections. We advocate the exchange of (open-source) platforms and stress the need for consistent "branding". Using (existing) conventions and reporting protocols would stimulate cross-fertilization between research groups and fields, and ultimately policy making in decades to come.

Final Report on Contract N00014-85-C-0078 (IBM Thomas J. Watson Research Center)

DTIC Science & Technology

1990-01-01

beam was TIME(psec) sent through the sodium cell; its peak input power was Fig. 3. Observed polarization beats (solid curves) compared 350 W, and the...that describe a new and powerful method of are obtained by ombining these two methods, L~e., by sending measuring 4)(t) and thereby obtaining the...first application of this powerful combi- frequency-swept pulse is passed through a resonant vapornation was by Shank et al.,6 who compressed 90.fsec

Intrinsic states in the sdg interacting boson model

NASA Astrophysics Data System (ADS)

Yoshinaga, N.

1986-08-01

We give the intrinsic states explicitly in the boson representation in the framework of the sdg interacting boson model. Although they are only valid in the large- N limit, they are useful to estimate various physical quantities in well deformed nuclei. One can compare these results with those predicted in the IBM1 or in the IBM2.

Preparing Future Teacher-Leaders: Experiences from the University of Connecticut's Five-Year Teacher Education Program

ERIC Educational Resources Information Center

Schwab, Richard L.; DeFranco, Thomas C.; McGivney-Burelle, Jean

2004-01-01

The article discusses the Integrated Bachelor's/Master's (IB/M) Teacher Preparation, a five-year teacher preparation program that integrates coursework, school-based clinic experiences, and university and K-12 faculty in the preparation of pre-service teachers. A major component of the IB/M program is the relationship with selected public school…

Using the Integrated Behavioral Model to Predict High-Risk Drinking among College Students

ERIC Educational Resources Information Center

Braun, Robert E.; Glassman, Tavis; Sheu, Jiunn-Jye; Dake, Joseph; Jordan, Tim; Yingling, Faith

2014-01-01

This study assessed the Integrated Behavioral Model's (IBM) utility in explaining high-risk drinking among college students. A total of 356 participants completed a four-page questionnaire based on the (IBM) theory and their drinking behavior. The results from a path analysis revealed three significant constructs (p<0.05) which predicted…

Making IBM's Computer, Watson, Human

ERIC Educational Resources Information Center

Rachlin, Howard

2012-01-01

This essay uses the recent victory of an IBM computer (Watson) in the TV game, "Jeopardy," to speculate on the abilities Watson would need, in addition to those it has, to be human. The essay's basic premise is that to be human is to behave as humans behave and to function in society as humans function. Alternatives to this premise are considered…

Digital data, composite video multiplexer and demultiplexer boards for an IBM PC/AT compatible computer

NASA Technical Reports Server (NTRS)

Smith, Dean Lance

1993-01-01

Work continued on the design of two IBM PC/AT compatible computer interface boards. The boards will permit digital data to be transmitted over a composite video channel from the Orbiter. One board combines data with a composite video signal. The other board strips the data from the video signal.

Elementary Technology Demonstration Schools: The Third Year 1992-93. Publication Number 92.31.

ERIC Educational Resources Information Center

Sabatino, Melissa

The 1992-93 school year was the third year of the Elementary Technology Demonstration Schools program of the Austin (Texas) schools; the project is funded by International Business Machines Corporation (IBM) and Apple Computer Inc. Grants from these corporations were used to equip three elementary schools with IBM equipment and one with Apple…

Computer program for calculating the flow field of supersonic ejector nozzles

NASA Technical Reports Server (NTRS)

Anderson, B. H.

1974-01-01

An analytical procedure for computing the performance of supersonic ejector nozzles is presented. This procedure includes real sonic line effects and an interaction analysis for the mixing process between the two streams. The procedure is programmed in FORTRAN 4 and has operated successfully on IBM 7094, IBM 360, CDC 6600, and Univac 1108.

SNAP/SHOT Your Ability to Support That Next Application.

ERIC Educational Resources Information Center

Jones, Ernest L.

SNAP/SHOT (System Network Analysis Program-Simulated Host Overview Technique) is a discrete simulation of a network and/or host model available through IBM at the Raleigh System Center. The simulator provides an analysis of a total IBM Communications System. Input data must be obtained from RMF, SMF, and the CICS Analyzer to determine the existing…

Software Independent Verification and Validation (SIV&V) Simplified

DTIC Science & Technology

2006-12-01

Configuration Item I/O Input/Output I2V2 Independent Integrated Verification and Validation IBM International Business Machines ICD Interface...IPT Integrated Product Team IRS Interface Requirements Specification ISD Integrated System Diagram ITD Integrated Test Description ITP ...programming languages such as COBOL (Common Business Oriented Language) (Codasyl committee 1960), and FORTRAN (FORmula TRANslator) ( IBM 1952) (Robat 11

Integral Ramjet Booster Demonstration Program

DTIC Science & Technology

1975-02-01

Table 3-10 THREE-COMPONENT DECOMPOSITION MODEL Component r0 Ibm ;"-3 7ft Ibm ^ft A (Resin) 60.75 B (Resin) 20.24 C (Reinf.) 110.00...Cured Strands Burn rate 1000 psia/ + 70°F, in./sec Pressure exponent o. (-65 to +1600F), %/"F itP , (-65 to tUCF), ü/8» Ballistic Properties, 6

CAI-BASIC: A Program to Teach the Programming Language BASIC.

ERIC Educational Resources Information Center

Barry, Thomas Anthony

A computer-assisted instruction (CAI) program was designed which fulfills the objectives of teaching a simple programing language, interpreting student responses, and executing and editing student programs. The CAI-BASIC program is written in FORTRAN IV and executes on IBM-2741 terminals while running under a time-sharing system on an IBM-360-70…

Performance of the Mayo-IBM PAC system

NASA Astrophysics Data System (ADS)

Persons, Kenneth R.; Reardon, Frank J.; Gehring, Dale G.; Hangiandreou, Nicholas J.

1994-05-01

The Mayo Clinic and IBM (at Rochester, Minnesota) have jointly developed a picture archived system for use with Mayo's MRI and CT imaging modalities. This PACS is made up of over 50 computers that work cooperatively to provide archival, retrieval and image distribution services for Mayo's Department of Radiology. This paper will examine the performance characteristics of the system.

Continued Development of Internet Protocols under the IBM OS/MVS Operating System

DTIC Science & Technology

1985-01-25

developed a prototype TCP/IP implementation for an IBM MVS host under a previous DARPA contract’ as part of the Internet research effort on the design of...participated in the DARPA Internet research program which led to the present TCP and IP protocols. Development of a prototype implementation of TCP/IP

Linear circuit analysis program for IBM 1620 Monitor 2, 1311/1443 data processing system /CIRCS/

NASA Technical Reports Server (NTRS)

Hatfield, J.

1967-01-01

CIRCS is modification of IBSNAP Circuit Analysis Program, for use on smaller systems. This data processing system retains the basic dc, transient analysis, and FORTRAN 2 formats. It can be used on the IBM 1620/1311 Monitor I Mod 5 system, and solves a linear network containing 15 nodes and 45 branches.

Technology and design of an active-matrix OLED on crystalline silicon direct-view display for a wristwatch computer

NASA Astrophysics Data System (ADS)

Sanford, James L.; Schlig, Eugene S.; Prache, Olivier; Dove, Derek B.; Ali, Tariq A.; Howard, Webster E.

2002-02-01

The IBM Research Division and eMagin Corp. jointly have developed a low-power VGA direct view active matrix OLED display, fabricated on a crystalline silicon CMOS chip. The display is incorporated in IBM prototype wristwatch computers running the Linus operating system. IBM designed the silicon chip and eMagin developed the organic stack and performed the back-end-of line processing and packaging. Each pixel is driven by a constant current source controlled by a CMOS RAM cell, and the display receives its data from the processor memory bus. This paper describes the OLED technology and packaging, and outlines the design of the pixel and display electronics and the processor interface. Experimental results are presented.

Study of the 190Hg Nucleus: Testing the Existence of U(5) Symmetry

NASA Astrophysics Data System (ADS)

Jahangiri Tazekand, Z.; Mohseni, M.; Mohammadi, M. A.; Sabri, H.

2018-06-01

In this paper, we have considered the energy spectra, quadrupole transition probabilities, energy surface, charge radii, and quadrupole moment of the190Hg nucleus to describe the interplay between phase transitions and configuration mixing of intruder excitations. To this aim, we have used four different formalisms: (i) interacting boson model including configuration mixing, (ii) Z(5) critical symmetry, (iii) U(6)-based transitional Hamiltonian, and (iv) a transitional interacting boson model Hamiltonian in both interacting boson model (IBM)-1 and IBM-2 versions which are based on affine \\widehat{SU(1,1)} Lie algebra. Results show the advantages of configuration mixing and transitional Hamiltonians, in particular IBM-2 formalism, to reproduce the experimental counterparts when the weight of spherical symmetry increased.

Isospin degree of freedom in even-even 68-76Ge and 62-70Zn isotopes

NASA Astrophysics Data System (ADS)

Jalili Majarshin, A.

2018-01-01

The introduction of isotopic spin is significant in light nuclei as Ge and Zn isotopes in order to take into account isospin effects on energy spectra. Dynamical symmetries in spherical, γ-soft limits and transition in the interacting boson model IBM-3 are analyzed. Analytic expressions and exact eigenenergies, electromagnetic transitions probabilities are obtained for the transition between spherical and γ-soft shapes by using the Bethe ansatz within an infinite-dimensional Lie algebra in light mass nuclei. The corresponding algebraic structure and reduction chain are studied in IBM-3. For examples, the nuclear structure of the 68-76Ge and 62-70Zn isotopes is calculated in IBM-3 and compared with experimental results.

Computer program for prediction of capture maneuver probability for an on-off reaction controlled upper stage

NASA Technical Reports Server (NTRS)

Knauber, R. N.

1982-01-01

A FORTRAN coded computer program which computes the capture transient of a launch vehicle upper stage at the ignition and/or separation event is presented. It is for a single degree-of-freedom on-off reaction jet attitude control system. The Monte Carlo method is used to determine the statistical value of key parameters at the outcome of the event. Aerodynamic and booster induced disturbances, vehicle and control system characteristics, and initial conditions are treated as random variables. By appropriate selection of input data pitch, yaw and roll axes can be analyzed. Transient response of a single deterministic case can be computed. The program is currently set up on a CDC CYBER 175 computer system but is compatible with ANSI FORTRAN computer language. This routine has been used over the past fifteen (15) years for the SCOUT Launch Vehicle and has been run on RECOMP III, IBM 7090, IBM 360/370, CDC6600 and CDC CYBER 175 computers with little modification.

Development of a computer-aided detection system for lung cancer diagnosis

NASA Astrophysics Data System (ADS)

Suzuki, Hideo; Inaoka, Noriko; Takabatake, Hirotsugu; Mori, Masaki; Sasaoka, Soichi; Natori, Hiroshi; Suzuki, Akira

1992-06-01

This paper describes a modified system for automatic detection of lung nodules by means of chest x ray image processing techniques. The objective of the system is to help radiologists to improve their accuracy in cancer detection. It is known from retrospective studies of chest x- ray images that radiologists fail to detect about 30 percent of lung cancer cases. A computerized method for detecting lung nodules would be very useful for decreasing the proportion of such oversights. Our proposed system consists of five sub-systems, for image input, lung region determination, nodule detection, rule-based false-positive elimination, and statistical false-positive elimination. In an experiment with the modified system, using 30 lung cancer cases and 78 normal control cases, we obtained figures of 73.3 percent and 89.7 percent for the sensitivity and specificity of the system, respectively. The system has been developed to run on the IBM* PS/55* and IBM RISC System/6000* (RS/6000), and we give the processing time for each platform.

PLOT3D- DRAWING THREE DIMENSIONAL SURFACES

NASA Technical Reports Server (NTRS)

Canright, R. B.

1994-01-01

PLOT3D is a package of programs to draw three-dimensional surfaces of the form z = f(x,y). The function f and the boundary values for x and y are the input to PLOT3D. The surface thus defined may be drawn after arbitrary rotations. However, it is designed to draw only functions in rectangular coordinates expressed explicitly in the above form. It cannot, for example, draw a sphere. Output is by off-line incremental plotter or online microfilm recorder. This package, unlike other packages, will plot any function of the form z = f(x,y) and portrays continuous and bounded functions of two independent variables. With curve fitting; however, it can draw experimental data and pictures which cannot be expressed in the above form. The method used is division into a uniform rectangular grid of the given x and y ranges. The values of the supplied function at the grid points (x, y) are calculated and stored; this defines the surface. The surface is portrayed by connecting successive (y,z) points with straight-line segments for each x value on the grid and, in turn, connecting successive (x,z) points for each fixed y value on the grid. These lines are then projected by parallel projection onto the fixed yz-plane for plotting. This program has been implemented on the IBM 360/67 with on-line CDC microfilm recorder.

Computer methods for sampling from the gamma distribution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, M.E.; Tadikamalla, P.R.

1978-01-01

Considerable attention has recently been directed at developing ever faster algorithms for generating gamma random variates on digital computers. This paper surveys the current state of the art including the leading algorithms of Ahrens and Dieter, Atkinson, Cheng, Fishman, Marsaglia, Tadikamalla, and Wallace. General random variate generation techniques are explained with reference to these gamma algorithms. Computer simulation experiments on IBM and CDC computers are reported.

Trench Advance By the Subduction of Buoyant Features - Application to the Izu-Bonin-Marianas Arc

NASA Astrophysics Data System (ADS)

Goes, S. D. B.; Fourel, L.; Morra, G.

2014-12-01

Most subduction trenches retreat, not only today but throughout the Cenozoic. However, a few trenches clearly advance during part of the evolution, including Izu-Bonin Marianas (IBM) and Kermadec. Trench retreat is well understood as a basic consequence of slab pull, but it is debated what causes trench advance. The IBM trench underwent a complex evolution: right after its initiation, it rotated clockwise, leading to very fast retreat in the north and slow retreat in the south. But since 10-15 Ma, IBM trench motions have switched to advance at the southern end, and since 5 Ma also the northern end is advancing. Based on 2-D subduction models, it has been proposed proposed that the change in age of the subducting plate at the IBM trench (from 40-70 m.y. at the initiation of the trench 45 m.y. ago to 100-140 m.y. lithosphere subducting at the trench today) and its effect on plate strength could explain the transition from trench retreat to trench advance, and that the age gradient (younger in the north and older in the south) could explain the rotation of the trench. However, with new 3-D coupled fluid-solid subduction model where we can include such lateral age gradients, we find that this does not yield the observed behaviour. Instead, we propose an alternative mechanism, involving the subduction of the buoyant Caroline Island Ridge at the southern edge of the Mariana trench and show that it can explain both trench motion history and the current morphology of the IBM slab as imaged by seismic tomography.

X-ray mask fabrication advancements at the Microlithographic Mask Development Center

NASA Astrophysics Data System (ADS)

Kimmel, Kurt R.; Hughes, Patrick J.

1996-05-01

The Microlithographic Mask Development Center (MMD) was established as the X-ray mask manufacturing facility at the IBM Microelectronics Division semiconductor fabricator in Essex Junction, Vermont. This center, in operation for over two years, produces high yielding, defect-free X-ray masks for competitive logic and memory products at 250nm groundrules and below. The MMD is a complete mask facility that manufactures silicon membrane mask blanks in the NIST format and finished masks with electroplated gold X-ray absorber. Mask patterning, with dimensions as small as 180 nm, is accomplished using IBM-built variable shaped spot e-beam systems. Masks are routinely inspected and repaired using state-of-the-art equipment: two KLA SEM Specs for defect inspection, a Leica LMS 2000 for image placement characterization, an Amray 2040c for image dimension characterization and a Micrion 8000 XMR for defect repair. This facility maintains a baseline mask process with daily production of 250nm, 32Mb SRAM line monitor masks for the continuous improvement of mask quality and processes. Development masks are produced for several semiconductor manufacturers including IBM, Motorola, Loral, and Sanders. Masks for 64Mb and 256Mb DRAM (IBM) and advanced logic/SRAM (IBM and Motorola) designs have also been delivered. This paper describes the MMD facility and its technical capabilities. Key manufacturing metrics such as mask turnaround time, parametric yield learning and defect reduction activities are highlighted. The challenges associated with improved mask quality, sub-180nm mask fabrication, and the transition to refractory metal absorber are discussed.

George E. Pake Prize Lecture: Physical Sciences Research at IBM: Still at the Cutting Edge

NASA Astrophysics Data System (ADS)

Theis, Thomas

2015-03-01

The information technology revolution is in its ``build out'' phase. The foundational scientific insights and hardware inventions are now many decades old. The microelectronics industry is maturing. An increasing fraction of the total research investment is in software and services, as applications of information technology transform every business and every sector of the public and private economy. Yet IBM Research continues to make substantial investments in hardware technology and the underlying physical sciences. While some of this investment is aimed at extending the established transistor technology, an increasing fraction is aimed at longer-term and possibly disruptive research - new devices for computing, such as tunneling field-effect transistors and nanophotonic circuits, and new architectures, such as neurosynaptic systems and quantum computing. This research investment is a bet that the old foundations of information technology are ripe for reinvention. After all, today's information technology devices and systems operate far from any fundamental limits on speed and energy efficiency. But how can IBM make risky long-term research investments in an era of global competition, with financial markets focused on the short term? One important answer is partnerships. Since its early days, IBM Research has pursued innovation in information technology and innovation in the ways it conducts the business of research. By continuously evolving new models for research and development partnerships, it has extended its global reach, increased its impact on IBM's customers, and expanded the breadth and depth of its research project portfolio. Research in the physical sciences has often led the way. Currently on assignment to the Semiconductor Research Corporation.

Mesoangioblasts of inclusion-body myositis: a twofold tool to study pathogenic mechanisms and enhance defective muscle regeneration.

PubMed

Morosetti, R; Gliubizzi, C; Broccolini, A; Sancricca, C; Mirabella, M

2011-06-01

Mesoangioblasts are a class of adult stem cells of mesoderm origin, potentially useful for the treatment of primitive myopathies of different etiology. Extensive in vitro and in vivo studies in animal models of muscular dystrophy have demonstrated the ability of mesoangioblast to repair skeletal muscle when injected intra-arterially. In a previous work we demonstrated that mesoangioblasts obtained from diagnostic muscle biopsies of IBM patients display a defective differentiation down skeletal muscle and this block can be corrected in vitro by transient MyoD transfection. We are currently investigating different pathways involved in mesoangioblasts skeletal muscle differentiation and exploring alternative stimulatory approaches not requiring extensive cell manipulation. This will allow to obtain safe, easy and efficient molecular or pharmacological modulation of pro-myogenic pathways in IBM mesoangioblasts. It is of crucial importance to identify factors (ie. cytokines, growth factors) produced by muscle or inflammatory cells and released in the surrounding milieu that are able to regulate the differentiation ability of IBM mesoangioblasts. To promote myogenic differentiation of endogenous mesoangioblasts in IBM muscle, the modulation of such target molecules selectively dysregulated would be a more handy approach to enhance muscle regeneration compared to transplantation techniques. Studies on the biological characteristics of IBM mesoangioblasts with their aberrant differentiation behavior, the signaling pathways possibly involved in their differentiation block and the possible strategies to overcome it in vivo, might provide new insights to better understand the etiopathogenesis of this crippling disorder and to identify molecular targets susceptible of therapeutic modulation.

Analysis of NCAM helps identify unusual phenotypes of hereditary inclusion-body myopathy.

PubMed

Broccolini, A; Gidaro, T; Tasca, G; Morosetti, R; Rodolico, C; Ricci, E; Mirabella, M

2010-07-20

Hereditary inclusion-body myopathy or distal myopathy with rimmed vacuoles (h-IBM/DMRV) is due to mutations of the UDP-N-acetylglucosamine 2-epimerase/N-acetylmannosamine kinase (GNE) gene, which codes for an enzyme of the sialic acid biosynthetic pathway. By Western blot (WB) analysis, we have previously shown that in h-IBM/DMRV muscle, the neural cell adhesion molecule (NCAM) has increased electrophoretic mobility that reflects reduced sialylation of the protein. To identify patients with h-IBM/DMRV with atypical clinical or pathologic phenotype using NCAM analysis and the possible cellular mechanism associated with the overall abnormal sialylation of NCAM observed in this disorder. WB analysis of NCAM was performed on muscle biopsies of 84 patients with an uncharacterized muscle disorder who were divided in the following 2 groups: 1) 46 patients with a proximal muscle weakness in whom the main limb-girdle muscular dystrophy syndromes had been ruled out; and 2) 38 patients with a distal distribution of weakness in whom a neurogenic affection had been excluded. Patients in whom a reduced sialylation of NCAM was suspected were studied for the presence of GNE mutations. In 3 patients, we found that NCAM had increased electrophoretic mobility, thus suggesting an abnormal sialylation of the protein. The genetic study demonstrated that they all carried pathogenic GNE mutations. Further studies demonstrated that hyposialylated NCAM, showing increased electrophoretic mobility on WB, is expressed by nonregenerating fibers in h-IBM/DMRV muscle. WB analysis of NCAM may be instrumental in the identification of h-IBM/DMRV with atypical clinical or pathologic features.

Comparison of individual-based modeling and population approaches for prediction of foodborne pathogens growth.

PubMed

Augustin, Jean-Christophe; Ferrier, Rachel; Hezard, Bernard; Lintz, Adrienne; Stahl, Valérie

2015-02-01

Individual-based modeling (IBM) approach combined with the microenvironment modeling of vacuum-packed cold-smoked salmon was more effective to describe the variability of the growth of a few Listeria monocytogenes cells contaminating irradiated salmon slices than the traditional population models. The IBM approach was particularly relevant to predict the absence of growth in 25% (5 among 20) of artificially contaminated cold-smoked salmon samples stored at 8 °C. These results confirmed similar observations obtained with smear soft cheese (Ferrier et al., 2013). These two different food models were used to compare the IBM/microscale and population/macroscale modeling approaches in more global exposure and risk assessment frameworks taking into account the variability and/or the uncertainty of the factors influencing the growth of L. monocytogenes. We observed that the traditional population models significantly overestimate exposure and risk estimates in comparison to IBM approach when contamination of foods occurs with a low number of cells (<100 per serving). Moreover, the exposure estimates obtained with the population model were characterized by a great uncertainty. The overestimation was mainly linked to the ability of IBM to predict no growth situations rather than the consideration of microscale environment. On the other hand, when the aim of quantitative risk assessment studies is only to assess the relative impact of changes in control measures affecting the growth of foodborne bacteria, the two modeling approach gave similar results and the simplest population approach was suitable. Copyright © 2014 Elsevier Ltd. All rights reserved.

Artificial intelligence in neurodegenerative disease research: use of IBM Watson to identify additional RNA-binding proteins altered in amyotrophic lateral sclerosis.

PubMed

Bakkar, Nadine; Kovalik, Tina; Lorenzini, Ileana; Spangler, Scott; Lacoste, Alix; Sponaugle, Kyle; Ferrante, Philip; Argentinis, Elenee; Sattler, Rita; Bowser, Robert

2018-02-01

Amyotrophic lateral sclerosis (ALS) is a devastating neurodegenerative disease with no effective treatments. Numerous RNA-binding proteins (RBPs) have been shown to be altered in ALS, with mutations in 11 RBPs causing familial forms of the disease, and 6 more RBPs showing abnormal expression/distribution in ALS albeit without any known mutations. RBP dysregulation is widely accepted as a contributing factor in ALS pathobiology. There are at least 1542 RBPs in the human genome; therefore, other unidentified RBPs may also be linked to the pathogenesis of ALS. We used IBM Watson ® to sieve through all RBPs in the genome and identify new RBPs linked to ALS (ALS-RBPs). IBM Watson extracted features from published literature to create semantic similarities and identify new connections between entities of interest. IBM Watson analyzed all published abstracts of previously known ALS-RBPs, and applied that text-based knowledge to all RBPs in the genome, ranking them by semantic similarity to the known set. We then validated the Watson top-ten-ranked RBPs at the protein and RNA levels in tissues from ALS and non-neurological disease controls, as well as in patient-derived induced pluripotent stem cells. 5 RBPs previously unlinked to ALS, hnRNPU, Syncrip, RBMS3, Caprin-1 and NUPL2, showed significant alterations in ALS compared to controls. Overall, we successfully used IBM Watson to help identify additional RBPs altered in ALS, highlighting the use of artificial intelligence tools to accelerate scientific discovery in ALS and possibly other complex neurological disorders.

The Ecology of the Mobile Worker. Workscape 21: The Ecology of New Ways of Working.

ERIC Educational Resources Information Center

Becker, Franklin; Quinn, Kristen L.; Callentine, Livit U.

A study addressed the impact of household composition--preschool, school-age, or no children--and nature of the home workspace--dedicated room or area--on IBM employees' satisfaction, stress, and work effectiveness. The IBM program allowed 300 employees who spent about 70 percent of their time with clients to work in home offices. Surveys,…

Optoelectric Technology Roadmap: Conclusions and Recommendations

DTIC Science & Technology

1994-05-01

Haitz Hughes Adrian Popa Robert Buckley IBM Maurizio Arienzo John Crow NYNEX Robert Lawrence Motorola Ron Nelson 3M Charles T. Walker OPTOELECTRONIC...Bellcore (1) Industrial Mark Chandler, Hewlett-Packard Military/Aerospace Richard Lind, Hughes Luis Figueroa , Boeing Computer John Crow, IBM...Bellcore William Womack AT&T Matt Goodman Bellcore Dwight Duston BMDO Paul Shumate Bellcore Luis Figueroa Boeing Richard Jones Broadband Technologies

UFO: A THREE-DIMENSIONAL NEUTRON DIFFUSION CODE FOR THE IBM 704

DOE Office of Scientific and Technical Information (OSTI.GOV)

Auerbach, E.H.; Jewett, J.P.; Ketchum, M.A.

A description of UFO, a code for the solution of the fewgroup neutron diffusion equation in three-dimensional Cartesian coordinates on the IBM 704, is given. An accelerated Liebmann flux iteration scheme is used, and optimum parameters can be calculated by the code whenever they are required. The theory and operation of the program are discussed. (auth)

An Evaluation of Alternative Delivery Modes for Information Services.

ERIC Educational Resources Information Center

Short, Craig; Christal, Melodie E.

The use of the floppy disk as an alternative mode for delivering Information Services reports was evaluated for fiscal year 1985 by the National Center for Higher Education Management Systems (NCHEMS). A 5.25 inch, 8/9 sector, 40 track ASCII floppy disk used under PC-DOS on the IBM PC and IBM PC compatible hardware was tested. Tabular data but not…

Analysis of Carbon Nanotube Field-Effect-Transistors (FETs)

NASA Technical Reports Server (NTRS)

Yamada, Toshishige

1999-01-01

This five page presentation is grouped into 11 numbered viewgraphs, most of which contain one or more diagrams. Some of the diagrams are accompanied by captions, including: 2) Nanotube FET by Delft, IBM; 3) Nanotube FET/Standard MOSFET; 5) Saturation with carrier-carrier; 7) Electronic properties of carbon nanotube; 8) Theoretical nanotube FET characteristics; 11) Summary: Delft and IBM nanotube FET analysis.

Analysis of sensitivity and uncertainty in an individual-based model of a threatened wildlife species

Treesearch

Bruce G. Marcot; Peter H. Singleton; Nathan H. Schumaker

2015-01-01

Sensitivity analysis—determination of how prediction variables affect response variables—of individual-based models (IBMs) are few but important to the interpretation of model output. We present sensitivity analysis of a spatially explicit IBM (HexSim) of a threatened species, the Northern Spotted Owl (NSO; Strix occidentalis caurina) in Washington...

A MAP fixed-point, packing-unpacking routine for the IBM 7094 computer

Treesearch

Robert S. Helfman

1966-01-01

Two MAP (Macro Assembly Program) computer routines for packing and unpacking fixed point data are described. Use of these routines with Fortran IV Programs provides speedy access to quantities of data which far exceed the normal storage capacity of IBM 7000-series computers. Many problems that could not be attempted because of the slow access-speed of tape...

Hereditary inclusion-body myopathy with sparing of the quadriceps: the many tiles of an incomplete puzzle.

PubMed

Broccolini, A; Gidaro, T; Morosetti, R; Sancricca, C; Mirabella, M

2011-10-01

The hereditary inclusion-body myopathies encompass several syndromes with autosomal recessive or dominant inheritance. Despite a different clinical presentation they all have a progressive course leading to severe disability and share similar pathologic findings at the muscle biopsy. Quadriceps-sparing autosomal recessive hereditary inclusion-body myopathy (h-IBM) is the commonest form and is tied to mutations of the UDP-N-acetylglucosamine 2-epimerase/N-acetylmannosamine kinase (GNE) that codes for a rate-limiting enzyme in the sialic acid biosynthetic pathway. Despite the identification of the causative gene defect, it has not been clarified how mutations of the GNE gene impair muscle homeostasis. Although several lines of evidence argue in favor of an abnormal sialylation of muscle glycoproteins playing a key role in h-IBM pathogenesis, others studies have demonstrated new functions of the GNE gene, outside the sialic acid biosynthetic pathway, that may also be relevant. This review illustrates the clinical and pathologic characteristics of h-IBM and the main clues available to date concerning the possible pathogenic mechanisms of this disorder. Understanding the molecular mechanism underlying h-IBM pathology is a fundamental requisite to plan a future attempt to therapy.

Upper Atmosphere Research Satellite (UARS) trade analysis

NASA Technical Reports Server (NTRS)

Fox, M. M.; Nebb, J.

1983-01-01

The Upper Atmosphere Research Satellite (UARS) which will collect data pertinent to the Earth's upper atmosphere is described. The collected data will be sent to the central data handling facility (CDHF) via the UARS ground system and the data will be processed and distributed to the remote analysis computer systems (RACS). An overview of the UARS ground system is presented. Three configurations were developed for the CDHF-RACS system. The CDHF configurations are discussed. The IBM CDHF configuration, the UNIVAC CDHF configuration and the vax cluster CDHF configuration are presented. The RACS configurations, the IBM RACS configurations, UNIVAC RACS and VAX RACS are detailed. Due to the large on-line data estimate to approximately 100 GB, a mass storage system is considered essential to the UARS CDHF. Mass storage systems were analyzed and the Braegan ATL, the RCA optical disk, the IBM 3850 and the MASSTOR M860 are discussed. It is determined that the type of mass storage system most suitable to UARS is the automated tape/cartridge device. Two devices of this type, the IBM 3850 and the MASSTOR MSS are analyzed and the applicable tape/cartridge device is incorporated into the three CDHF-RACS configurations.

The POIS (Parkland On-Line Information System) Implementation of the IBM Health Care Support/Patient Care System

PubMed Central

Mishelevich, David J.; Hudson, Betty G.; Van Slyke, Donald; Mize, Elaine I.; Robinson, Anna L.; Brieden, Helen C.; Atkinson, Jack; Robertson, James

1980-01-01

The installation of major components of a comprehensive Hospital Information System (HIS) called POIS, the Parkland On-line Information System, including identified success factors is described for the Dallas County Hospital District (DCHD) known also as the Parkland Memorial Hospital. Installation of the on-line IBM Health Care Support (HCS) Registration and Admissions Packages occurred in 1976 and implementation of the HCS Patient Care System (PCS) began in 1977 which includes on-line support of health care areas such as nursing stations and ancillary areas. The Duke Hospital Information System (DHIS) is marketed as the IBM HCS/Patient Care System (PCS). DCHD was the validation site. POIS has order entry, result reporting and work management components. While most of the patient care components are currently installed for the inpatient service, the Laboratories are being installed for the outpatient and Emergency areas as well. The Clinic Appointment System developed at the University of Michigan is also installed. The HCS family of programs use DL/1 and CICS and were installed in the OS versions, currently running under MVS on an IBM 370/168 Model 3 with 8 megabytes of main memory. ImagesFigure 1-AFigure 1-B

Computer program for the IBM personal computer which searches for approximate matches to short oligonucleotide sequences in long target DNA sequences.

PubMed Central

Myers, E W; Mount, D W

1986-01-01

We describe a program which may be used to find approximate matches to a short predefined DNA sequence in a larger target DNA sequence. The program predicts the usefulness of specific DNA probes and sequencing primers and finds nearly identical sequences that might represent the same regulatory signal. The program is written in the C programming language and will run on virtually any computer system with a C compiler, such as the IBM/PC and other computers running under the MS/DOS and UNIX operating systems. The program has been integrated into an existing software package for the IBM personal computer (see article by Mount and Conrad, this volume). Some examples of its use are given. PMID:3753785

A sensitive, support-vector-machine method for the detection of horizontal gene transfers in viral, archaeal and bacterial genomes.

PubMed

Tsirigos, Aristotelis; Rigoutsos, Isidore

2005-01-01

In earlier work, we introduced and discussed a generalized computational framework for identifying horizontal transfers. This framework relied on a gene's nucleotide composition, obviated the need for knowledge of codon boundaries and database searches, and was shown to perform very well across a wide range of archaeal and bacterial genomes when compared with previously published approaches, such as Codon Adaptation Index and C + G content. Nonetheless, two considerations remained outstanding: we wanted to further increase the sensitivity of detecting horizontal transfers and also to be able to apply the method to increasingly smaller genomes. In the discussion that follows, we present such a method, Wn-SVM, and show that it exhibits a very significant improvement in sensitivity compared with earlier approaches. Wn-SVM uses a one-class support-vector machine and can learn using rather small training sets. This property makes Wn-SVM particularly suitable for studying small-size genomes, similar to those of viruses, as well as the typically larger archaeal and bacterial genomes. We show experimentally that the new method results in a superior performance across a wide range of organisms and that it improves even upon our own earlier method by an average of 10% across all examined genomes. As a small-genome case study, we analyze the genome of the human cytomegalovirus and demonstrate that Wn-SVM correctly identifies regions that are known to be conserved and prototypical of all beta-herpesvirinae, regions that are known to have been acquired horizontally from the human host and, finally, regions that had not up to now been suspected to be horizontally transferred. Atypical region predictions for many eukaryotic viruses, including the alpha-, beta- and gamma-herpesvirinae, and 123 archaeal and bacterial genomes, have been made available online at http://cbcsrv.watson.ibm.com/HGT_SVM/.

Exploring Gender Differences in Predicting Physical Activity among Elementary Aged Children: An Application of the Integrated Behavioral Model

ERIC Educational Resources Information Center

Branscum, Paul; Bhochhibhoya, Amir

2016-01-01

Background: The integrated behavioral model (IBM) is a new and emerging theory in the field of health promotion and health education, and more applications are needed to test the usefulness of the model for research and practice. Purpose: The purpose of this study was to operationalize the IBM as it relates to physical activity (PA) among children…

Advanced CMOS Radiation Effects Testing and Analysis

NASA Technical Reports Server (NTRS)

Pellish, J. A.; Marshall, P. W.; Rodbell, K. P.; Gordon, M. S.; LaBel, K. A.; Schwank, J. R.; Dodds, N. A.; Castaneda, C. M.; Berg, M. D.; Kim, H. S.;

Proceedings of the IBM Academic Information Systems University AEP Conference: "Tools for Learning" (2nd, San Diego, California, April 5-8, 1986).

ERIC Educational Resources Information Center

Dwyer, Frederick D., Ed.

Advanced Education Projects (AEPs) are a series of multidisciplinary, advanced experiments in educational computing supported by IBM and currently in progress at 19 leading universities. Each AEP has established a series of curricular experiments to explore the use of workstations and network technologies as part of the instructional process. The…

77 FR 51573 - Certain Automated Media Library Devices; Determination To Review in Part a Final Initial...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-24

... convincing evidence that the IBM 3570, 3575, 7331, 7336 and 3494 documents qualify as printed publications.... To the extent the IBM 3570, 7331, 7336 and 3494 documents qualify as printed publications under 35 U... Elecs., Inc., 553 U.S. 617 (2008); LG Elecs., Inc. v. Bizcom Elecs., Inc., 453 F.3d 1364 (Fed. Cir. 2006...

Investigation of Single Events Upsets in Silicon and GaAs Structures Using Reaction Calculations

DTIC Science & Technology

1994-09-01

T.L. Criswell, D.L. Oberg, J.L. Wert, P.R. Measel , and W.E. Wilson, "Measurement of SEU Thresholds and Cross Sec- tions at Fixed Incidence Angles...WOOD ATTN: E KUBO ATTN: 0 MULKEY IBM CORP BOEING TECHNICAL & MANAGEMENT SVCS, INC ATTN: DEPT L75 ATTN: E NORMAND IBM CORP ATTN: P R MEASEL ATTN: A

SFAP: Scan-Tron Forms Analysis Package for the IBM-PC. User's Guide, Version 2.0.

ERIC Educational Resources Information Center

Harnisch, Delwyn L.; And Others

The Scan-Tron Forms Analysis Package (SFAP) is a collection of integrated programs that allow an IBM-PC (or compatible) to collect data from a Scan-Tron 1200 forms reader. In addition to the basic data acquisition capability, the SFAP has additional capabilities related to the viewing and formatting of incoming data. When used in combination with…

Hypermetabolism as a Risk Factor for ALS

DTIC Science & Technology

2013-09-01

hIBM) and sporadic Inclusion Body Myositis (sIBM). These disorders are characterized clinically by progressive muscle degeneration and weakness that...1186–1189 (2008). 3. Lloyd, T. E. Novel therapeutic approaches for inclusion body myositis . Current Opinion in Rheumatology 22, 658–664 (2010). 4...46, 424–430 (2008). 8. Weihl, C. C. & Pestronk, A. Sporadic inclusion body myositis : possible pathogenesis inferred from biomarkers. Curr Opin

A Review of Software Maintenance Technology.

DTIC Science & Technology

1980-02-01

LABS HONEYWELL, REF BURROUGHS, OTHERS BOOLE £ LANGUAGE "PE BABBAGE , OPERATIONAL INDEPENDENT 4.2.17 INC. IBM H M RELIABILITY MOST LARGE U. MEASUREMENT...80-13 ML llluuluunuuuuu SmeeI..... f. Maintenance Experience (1) Multiple Implementation Charles Holmes (Source 2) described two attempts at McDonnell...proprietary software monitor package distributed by Boole and Babbage , Inc., Sunnyvale, California. it has been implemented on IBM computers and is language

Purchasing a Computer System for the Small Construction Company,

DTIC Science & Technology

1983-06-08

October 1982. . . . . . . .. i. i...< ..- . ,. .-: i. i? ,. . .-- i * i . . . ., r77- 7 *,~ .- -- 36 IBM - International Business Machines...Corporation, "Small Systems Solutions: An Introduction to Business Computing," Pamphlet SC21-5205-0, Atlanta, Georgia, January 1979. International Business Machines...Corporation, "IBM System/34 Introduction," Pamphlet GC21-5153-5, File No. S34-00, Atlanta, Georgia, January 1979. International Business Machines

The forearc crustal evolution of Izu-Bonin (Ogasawara) region obtained by seismic reflection and refraction surveys

NASA Astrophysics Data System (ADS)

Yamashita, M.; Kodaira, S.; Takahashi, N.; Tatsumi, Y.; Kaneda, Y.

2009-12-01

The Izu-Bonin (Ogasawara)-Mariana (IBM) arc is known to the typical oceanic island arc, and it is the most suitable area to understand the growth process of island arc. By previous seismic survey and deep sea drilling, convex basements are distributed along North-South direction in present forearc region. The convex basements are reported to be formed during Oligocene and Eocene (Taylor, 1992). In IBM forearc region, the middle crust with 6 km/s is recognized by seismic survey using OBSs. In IBM region, four IODP drilling sites are proposed in order to understand comprehensive growth process of arc and continental crust evolution. Two of them are located in forearc region. Japan Agency for Marine-Earth Science and Technology (JAMSTEC) carried out multi-channel seismic reflection survey using 7,800/12,000 cu.in. air gun and 5-6 km streamer with 444/204 ch hydrophones in the IBM region since 2004. We investigate the crustal structure beneath the Izu-Bonin forearc region for contribution of IBM drilling site along five long survey lines, which are across from present volcanic front to forearc basin. Seismic refraction survey is also conducted across forearc region using 84 OBSs every 1 km interval. Shallow crustal structure can be classified four units including basement which compared between previous drilling results and obtained seismic profiles. In IBM forearc region, thick sedimentary basin distribute from east side of volcanic front. Two convex basement peaks are indicated in across profile of forearc region. These peaks are estimated the top of paleoarc (Oligocene and Eocene) by previous ODP drilling. The half graben structure with major displacement is identified from west side of present volcanic front to the top of Oligocene arc. On the other hand, there is no displacement of sediments between the Oligocene arc and Eocene arc. This result shows the same origin of basement between the present volcanic front and Oligocene arc. There is long time difference of tectonic activity of sediments between the west and east side of Oligocene paleoarc. We would present the crustal condition before rifting between present volcanic front and Oligocene paleoarc by comparison of reflection and velocity structure.

An application of interactive graphics to neutron spectrometry

NASA Technical Reports Server (NTRS)

Binney, S. E.

1972-01-01

The use of interactive graphics is presented as an attractive method for performing multi-parameter data analysis of proton recoil distributions to determine neutron spectra. Interactive graphics allows the user to view results on-line as the program is running and to maintain maximum control over the path along which the calculation will proceed. Other advantages include less time to obtain results and freedom from handling paper tapes and IBM cards.

The Six Pillars of Influence: How Insurgent Organizations Manipulate Governments, Populations, and Their Operatives

DTIC Science & Technology

2009-03-01

Work, which has numerous business clients including IBM, Coca Cola , and Harvard University. C. CIALDINI’S PRINCIPLES OF INFLUENCE 1. Reciprocation...various advertising , public relations, and fund-raising agencies in order to learn these compliance methods from those that practice them. In his...associating the product (or themselves) with positive ideas and images. This is demonstrated in advertising by invoking the “official sponsor” moniker

An International Survey of Industrial Applications of Formal Methods. Volume 1: Purpose, Approach, Analysis, and Conclusions

DTIC Science & Technology

1993-09-30

97 Accesion For NTIS CRA&I DTIC TAB Unannounced 0 Justification ----- ---.......................... Ry Di. t ,:; t,.: 1...months of effort. The product was important for demonstrating to IBM management the potential of the Cleanroom methodology. 3.2.4 Software Architecture ...for Oscilloscopes Using Z (Tektronix) Tektronix in Beaverton, Oregon, used Z to develop a reusable software architecture to be shared among a number

Formal methods technology transfer: Some lessons learned

NASA Technical Reports Server (NTRS)

Hamilton, David

1992-01-01

IBM has a long history in the application of formal methods to software development and verification. There have been many successes in the development of methods, tools and training to support formal methods. And formal methods have been very successful on several projects. However, the use of formal methods has not been as widespread as hoped. This presentation summarizes several approaches that have been taken to encourage more widespread use of formal methods, and discusses the results so far. The basic problem is one of technology transfer, which is a very difficult problem. It is even more difficult for formal methods. General problems of technology transfer, especially the transfer of formal methods technology, are also discussed. Finally, some prospects for the future are mentioned.

Prevalence and Risk Factors of Domestic Violence against Iranian Women: A Cross-Sectional Study

PubMed Central

Mohamadian, Fathola; Hashemian, Ataollah; Bagheri, Maryam

2016-01-01

Background Violence against women in families is the most common form of violence against them. The purpose of this study was to determine the prevalence of domestic violence and its effects on married women of Ilam. Methods In this descriptive-sectional research, 334 married women referred to medical health centers in Ilam were selected to participate using a random sampling method. After obtaining their consent to participate in the study, participants responded to a 46 items questionnaire and responses were analyzed using IBM SPSS for Windows ver. 20.0 (IBM Co., Armonk, NY, USA). Results The majority of the participants reported experiencing domestic violence and emotional violence was more prevalent than other kinds of violence. Logistic regression analysis showed that lower education level, marriage at a younger age, shorter duration of marriage, fewer children, being a housewife, and husband's unemployment had a significant relationship with domestic violence against women. Conclusion The high prevalence of wife abuse in Ilam especially emotional violence due to lower education levels and marriage at younger age could be a serious threat for women's health as well as for other members of the family. This could be a grounding factor for other social harms such as suicide and this issue must be studied from legal, religious, and cultural standpoints. PMID:27468345

COSMIC monthly progress report

NASA Technical Reports Server (NTRS)

1993-01-01

Activities of the Computer Software Management and Information Center (COSMIC) are summarized for the month of August, 1993. Tables showing the current inventory of programs available from COSMIC are presented and program processing and evaluation activities are discussed. Ten articles were prepared for publication in the NASA Tech Brief Journal. These articles (included in this report) describe the following software items: (1) MOM3D - A Method of Moments Code for Electromagnetic Scattering (UNIX Version); (2) EM-Animate - Computer Program for Displaying and Animating the Steady-State Time-Harmonic Electromagnetic Near Field and Surface-Current Solutions; (3) MOM3D - A Method of Moments Code for Electromagnetic Scattering (IBM PC Version); (4) M414 - MIL-STD-414 Variable Sampling Procedures Computer Program; (5) MEDOF - Minimum Euclidean Distance Optimal Filter; (6) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (Macintosh Version); (7) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (IBM PC Version); (8) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (UNIX Version); (9) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (DEC VAX VMS Version); and (10) TFSSRA - Thick Frequency Selective Surface with Rectangular Apertures. Activities in the areas of marketing, customer service, benefits identification, maintenance and support, and dissemination are also described along with a budget summary.

Combining Individual-Based Modeling and Food Microenvironment Descriptions To Predict the Growth of Listeria monocytogenes on Smear Soft Cheese

PubMed Central

Ferrier, Rachel; Hezard, Bernard; Lintz, Adrienne; Stahl, Valérie

2013-01-01

An individual-based modeling (IBM) approach was developed to describe the behavior of a few Listeria monocytogenes cells contaminating smear soft cheese surface. The IBM approach consisted of assessing the stochastic individual behaviors of cells on cheese surfaces and knowing the characteristics of their surrounding microenvironments. We used a microelectrode for pH measurements and micro-osmolality to assess the water activity of cheese microsamples. These measurements revealed a high variability of microscale pH compared to that of macroscale pH. A model describing the increase in pH from approximately 5.0 to more than 7.0 during ripening was developed. The spatial variability of the cheese surface characterized by an increasing pH with radius and higher pH on crests compared to that of hollows on cheese rind was also modeled. The microscale water activity ranged from approximately 0.96 to 0.98 and was stable during ripening. The spatial variability on cheese surfaces was low compared to between-cheese variability. Models describing the microscale variability of cheese characteristics were combined with the IBM approach to simulate the stochastic growth of L. monocytogenes on cheese, and these simulations were compared to bacterial counts obtained from irradiated cheeses artificially contaminated at different ripening stages. The simulated variability of L. monocytogenes counts with the IBM/microenvironmental approach was consistent with the observed one. Contrasting situations corresponding to no growth or highly contaminated foods could be deduced from these models. Moreover, the IBM approach was more effective than the traditional population/macroenvironmental approach to describe the actual bacterial behavior variability. PMID:23872572

Inclusion Body Myositis: A Case Presenting with Respiratory Failure and Autopsy Findings Leading to the Hypothesis of a Paraneoplastic Cause

PubMed Central

Dardis, Christopher; Antezana, Ariel; Tanji, Kurenai; Maccabee, Paul

2017-01-01

Patient: Female, 48 Final Diagnosis: Inclusion body myositis Symptoms: Shortness of breath • weakness Medication: — Clinical Procedure: Biopsy Specialty: Neurology Objective: Rare disease Background: Sporadic inclusion body myositis (IBM) is the most common acquired myopathy seen in adults aged over 50 years, with a prevalence estimated at between 1 and 70 per million. Weakness of the diaphragm with loss of vital capacity is almost universal in IBM. This is almost always asymptomatic. When respiratory complications occur, they are most often due to aspiration. Respiratory failure due to diaphragmatic weakness is exceptionally rare, particularly as the presenting symptom of the disease. It is not currently considered to be a paraneoplastic syndrome. Case Report: Our patient presented with hypercarbic respiratory failure. This is the first such reported case without signs of weakness elsewhere of which we are aware. We suspected IBM based on her history of progressive weakness and findings on electromyography. There was a delay of 5 years in obtaining biopsy for confirmation, during which she presented with recurrent episodes of respiratory failure despite using non-invasive ventilation. An autopsy revealed the presence of papillary thyroid carcinoma with spread to local lymph nodes. On the basis that these co-morbidities are unlikely to have occurred by chance (we estimate 1×10−17), we hypothesize that IBM may be a paraneoplastic condition. We acknowledge that proof would require demonstrating a pathogenic antibody. Conclusions: IBM should be considered in older patients (age >45) presenting with otherwise unexplained respiratory failure. A workup for possible malignancy in this setting appears reasonable. PMID:28642454

Inclusive business model in tapioca starch industry in Lake Toba area: a case study

NASA Astrophysics Data System (ADS)

Tampubolon, S.; Manik, Y.

2018-04-01

The notion of inclusive business calls for additional focus and innovation in the way companies do business which seeks to contribute to poverty alleviation by including Bottom of the Pyramids (BoP) communities within its value chain while not losing sight of the ultimate goal of business. Lake Toba Area has potentials in providing chances for doing businesses. On the other hand, the growth of market size is rather slow and demographically still dominated by BoP. This is a case study which seeks to investigate to what extent the Inclusive Business Model (IBM) is adopted in the strategic planning and applied in the operational management of companies that operate in Lake Toba Area. The study was conducted in qualitative basis. The observation was conducted by gathering data and information through a series of interviews with the top management and desk study of the business plan in a tapioca starch industry in Toba Samosir Regency. The collected data and information were then analyzed qualitatively by comparing them with criteria and parameters of IBM suggested in a vast body of literature. The reference by which the IBM is referred in this study is a series of criteria which is synthesized from a literature review on a vast body of literature about IBM. From data analysis, it is evident that IBM has been incorporated in the strategic plan and applied in the operational activities of the object of this study. However, we also found some rooms for improvement such as expanding the involvement of BoP in their value chain as consumers, by which some innovation in the product diversification is required.

Marshalling Corporate Resources for Public and K-12 Technical Education Outreach and Engagement

NASA Astrophysics Data System (ADS)

Wynne, James

2011-03-01

In 1988, the Education Task Force of the Business Roundtable recommended that American corporations invest in pre-college education. Prior to that date, corporate investment was targeted at higher education. IBM and other corporations responded by encouraging their employees and their corporate philanthropic organizations to develop programs aimed at enhancing pre-college education. The IBM TJ Watson Research Center initiated a Local Education Outreach program, active for these past 23 years, that marshals the resources of our science-rich institution to enhance STEM education in our local schools. We have broad and deep partnerships between the Research Center and local school districts, including New York City. We have just completed our 19th consecutive year of Family Science Saturdays, which brings 4th and 5th grade children, along with their parents, to our Research Center for hands-on workshops in topics like States of Matter, Polymer Science, Kitchen Chemistry, and Sound and Light. The workshops are staffed by IBM volunteers, assisted by local high school student ``Peer Teachers.'' Since 1990, the IBM Corporation has joined with a coalition of other companies, professional engineering societies, and government agencies to sponsor the annual Engineers Week (EWeek) campaign of technical education outreach, serving as Corporate Chair in 1992, 2001, and 2008. In recent years, we have annually recruited around 5000 IBM volunteers to reach out to more than 200,000 K-12 students in order to increase their awareness and appreciation of technical careers and encourage them to continue their studies of STEM (science, technology, engineering, and mathematics). The speaker, who helped found the APS Forum on Education (FED) and served as FED Councillor for 8 years, will review these and other programs for Public and K-12 Technical Education Outreach and Engagement.

Frequency and circumstances of falls in people with inclusion body myositis: a questionnaire survey to explore falls management and physiotherapy provision.

PubMed

Hiscock, A; Dewar, L; Parton, M; Machado, P; Hanna, M; Ramdharry, G

2014-03-01

To survey the incidence and circumstances of falls for people with inclusion body myositis (IBM) in the UK, and to investigate the provision of physiotherapy and falls management. Postal questionnaire survey. Participants completed questionnaires at home. Ninety-four people diagnosed with IBM were screened against the inclusion criteria. Seventy-two potential participants were sent a questionnaire, and 62 were completed and returned. Invited participants were sent an adapted Falls Event Questionnaire pertaining to falls, perceived causes of falls and the provision of physiotherapy. Questionnaires were returned anonymously. The proportions of respondents who reported a fall or a near fall, along with the frequencies of falls and near falls were calculated. Descriptive data of falls were collected pertaining to location and cause. Data analysis was performed to investigate provision of physiotherapy services. The response rate was 86% [62/72, mean (standard deviation) age 68 (8) years]. Falls were reported by 98% (61/62) of respondents, with 60% (37/62) falling frequently. In this study, age was not found to be an indicator of falls risk or frequency. Twenty-one percent (13/62) of respondents had not seen a physiotherapist in relation to their IBM symptoms, and of those that had, 31% (15/49) had not seen a physiotherapist until more than 12 months after IBM was diagnosed. Only 18% (11/61) of fallers reported that they had received falls management input. Falls are a common occurrence for people with IBM, independent of age and years since symptoms first presented, and are poorly addressed by appropriate physiotherapy management. National falls guidelines are not being followed, and referral rates to physiotherapy need to improve. Copyright © 2013 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

Data Discovery with IBM Watson

NASA Astrophysics Data System (ADS)

Fessler, J.

2016-12-01

BM Watson is a cognitive computing system that uses machine learning, statistical analysis, and natural language processing to find and understand the clues in questions posed to it. Watson was made famous when it bested two champions on TV's Jeopardy! show. Since then, Watson has evolved into a platform of cognitive services that can be trained on very granular fields up study. Watson is being used to support a number of subject domains, such as cancer research, public safety, engineering, and the intelligence community. IBM will be providing a presentation and demonstration on the Watson technology and will discuss its capabilities including Natural Language Processing, text analytics and enterprise search, as well as cognitive computing with deep Q&A. The team will also be giving examples of how IBM Watson technology is being used to support real-world problems across a number of public sector agencies

Cost-benefit study of consumer product take-back programs using IBM's WIT reverse logistics optimization tool

NASA Astrophysics Data System (ADS)

Veerakamolmal, Pitipong; Lee, Yung-Joon; Fasano, J. P.; Hale, Rhea; Jacques, Mary

2002-02-01

In recent years, there has been increased focus by regulators, manufacturers, and consumers on the issue of product end of life management for electronics. This paper presents an overview of a conceptual study designed to examine the costs and benefits of several different Product Take Back (PTB) scenarios for used electronics equipment. The study utilized a reverse logistics supply chain model to examine the effects of several different factors in PTB programs. The model was done using the IBM supply chain optimization tool known as WIT (Watson Implosion Technology). Using the WIT tool, we were able to determine a theoretical optimal cost scenario for PTB programs. The study was designed to assist IBM internally in determining theoretical optimal Product Take Back program models and determining potential incentives for increasing participation rates.

Earth Observations Division version of the Laboratory for Applications of Remote Sensing System (EOD-LARSYS) user guide for the IBM 370/148. Volume 2: User reference manual

NASA Technical Reports Server (NTRS)

Aucoin, P. J.; Stewart, J.; Mckay, M. F. (Principal Investigator)

1980-01-01

This document presents instructions for analysts who use the EOD-LARSYS as programmed on the Purdue University IBM 370/148 (recently replaced by the IBM 3031) computer. It presents sample applications, control cards, and error messages for all processors in the system and gives detailed descriptions of the mathematical procedures and information needed to execute the system and obtain the desired output. EOD-LARSYS is the JSC version of an integrated batch system for analysis of multispectral scanner imagery data. The data included is designed for use with the as built documentation (volume 3) and the program listings (volume 4). The system is operational from remote terminals at Johnson Space Center under the virtual machine/conversational monitor system environment.

Computing Legacy Software Behavior to Understand Functionality and Security Properties: An IBM/370 Demonstration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Linger, Richard C; Pleszkoch, Mark G; Prowell, Stacy J

Organizations maintaining mainframe legacy software can benefit from code modernization and incorporation of security capabilities to address the current threat environment. Oak Ridge National Laboratory is developing the Hyperion system to compute the behavior of software as a means to gain understanding of software functionality and security properties. Computation of functionality is critical to revealing security attributes, which are in fact specialized functional behaviors of software. Oak Ridge is collaborating with MITRE Corporation to conduct a demonstration project to compute behavior of legacy IBM Assembly Language code for a federal agency. The ultimate goal is to understand functionality and securitymore » vulnerabilities as a basis for code modernization. This paper reports on the first phase, to define functional semantics for IBM Assembly instructions and conduct behavior computation experiments.« less

The third level trigger and output event unit of the UA1 data-acquisition system

NASA Astrophysics Data System (ADS)

Cittolin, S.; Demoulin, M.; Fucci, A.; Haynes, W.; Martin, B.; Porte, J. P.; Sphicas, P.

1989-12-01

The upgraded UA1 experiment utilizes twelve 3081/E emulators for its third-level trigger system. The system is interfaced to VME, and is controlled by 68000 microprocessor VME boards on the input and output. The output controller communicates with an IBM 9375 mainframe via the CERN-IBM developed VICI interface. The events selected by the emulators are output on IBM-3480 cassettes. The user interface to this system is based on a series of Macintosh personal computer connected to the VME bus. These Macs are also used for developing software for the emulators and for monitoring the entire system. The same configuration has also been used for offline event reconstruction. A description of the system, together with details of both the online and offline modes of operation and an eveluation of its performance are presented.

Workshop on the Road to Room Temperature Superconductivity

DTIC Science & Technology

1993-01-14

703-693-1695 650 Harry Road San Jose, CA 95120 Mitzi , Dr. David Tel: 408-927-2434 IBM, Thomas J. Watson Research Fax: 408-927-2100 Center P. 0. Box 218...6:00 Kivelson Fisk: Mitzi : Gorkov: comments 7:30 - 9:30 urphl Torrance - conductivity and superconductivity (oxides) Williams: conductivity and...should develop a better gleanedfromexperimentandtheoryasguides. D. Mitzi (IBM Yorktown Heights) dis- theoretical understanding of highly corre- As the

Performance of OVERFLOW-D Applications based on Hybrid and MPI Paradigms on IBM Power4 System

NASA Technical Reports Server (NTRS)

Djomehri, M. Jahed; Biegel, Bryan (Technical Monitor)

2002-01-01

This report briefly discusses our preliminary performance experiments with parallel versions of OVERFLOW-D applications. These applications are based on MPI and hybrid paradigms on the IBM Power4 system here at the NAS Division. This work is part of an effort to determine the suitability of the system and its parallel libraries (MPI/OpenMP) for specific scientific computing objectives.

The Impact of Computer-Based Training on Operating and Support Costs for the AN/SQQ-89 (v) Sonar System

DTIC Science & Technology

2013-04-01

Visibility and Management of Operating and Support Costs (VAMOSC), under Unit Level Consumption and Manhours—Organizational Corrective Maintenance...2007). LCMS Knowledgebase 2007: A comparison of 30+ Enterprise Learning Content Management Systems. Sunnyvale, CA: Brandon Hall Research. Chatham, R...School. IBM. (2011). Naval visibility and management of operating and support costs (VAMOSC; 10.3, ships, user manual). IBM. (2011). Naval

A Structured Microprogram Set for the SUMC Computer to Emulate the IBM System/360, Model 50

NASA Technical Reports Server (NTRS)

Gimenez, Cesar R.

1975-01-01

Similarities between regular and structured microprogramming were examined. An explanation of machine branching architecture (particularly in the SUMC computer), required for ease of structured microprogram implementation is presented. Implementation of a structured microprogram set in the SUMC to emulate the IBM System/360 is described and a comparison is made between the structured set with a nonstructured set previously written for the SUMC.

98. View of IBM digital computer model 7090 magnet core ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

98. View of IBM digital computer model 7090 magnet core installation. ITT Artic Services, Inc., Official photograph BMEWS Site II, Clear, AK, by unknown photographer, 17 September 1965. BMEWS, clear as negative no. A-6606. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

Integrating the Nqueens Algorithm into a Parameterized Benchmark Suite

DTIC Science & Technology

2016-02-01

FOB is a 64-node heterogeneous cluster consisting of 16-IBM dx360M4 nodes, each with one NVIDIA Kepler K20M GPUs and 48-IBM dx360M4 nodes, and each...nodes have 256-GB of memory and an NVIDIA Tesla K40 GPU. More details on Excalibur can be found on the US Army DSRC website.19 Figures 3 and 4 show the

Interfacial and Thin Film Chemistry in Electron Device Fabrication

DTIC Science & Technology

1990-11-20

mounted on our UHV surface analysis system, and J. Forster and D. V. Podlesnik of the IBM General Technology Division. The following discussion...IBM (East Fishkill). The system being built consists of three chambers: one UHV analysis chamber, one UHV reaction chamber and one high pressure...system will be equipped with several surface analysis and cleaning techniques. Fourier transform infrared spectrometry will be used to do attenuated

WATEQ4F - a personal computer Fortran translation of the geochemical model WATEQ2 with revised data base

USGS Publications Warehouse

Ball, J.W.; Nordstrom, D. Kirk; Zachmann, D.W.

1987-01-01

A FORTRAN 77 version of the PL/1 computer program for the geochemical model WATEQ2, which computes major and trace element speciation and mineral saturation for natural waters has been developed. The code (WATEQ4F) has been adapted to execute on an IBM PC or compatible microcomputer. Two versions of the code are available, one operating with IBM Professional FORTRAN and an 8087 or 89287 numeric coprocessor, and one which operates without a numeric coprocessor using Microsoft FORTRAN 77. The calculation procedure is identical to WATEQ2, which has been installed on many mainframes and minicomputers. Limited data base revisions include the addition of the following ions: AlHS04(++), BaS04, CaHS04(++), FeHS04(++), NaF, SrC03, and SrHCO3(+). This report provides the reactions and references for the data base revisions, instructions for program operation, and an explanation of the input and output files. Attachments contain sample output from three water analyses used as test cases and the complete FORTRAN source listing. U.S. Geological Survey geochemical simulation program PHREEQE and mass balance program BALANCE also have been adapted to execute on an IBM PC or compatible microcomputer with a numeric coprocessor and the IBM Professional FORTRAN compiler. (Author 's abstract)

IBM1, a JmjC domain-containing histone demethylase, is involved in the regulation of RNA-directed DNA methylation through the epigenetic control of RDR2 and DCL3 expression in Arabidopsis

PubMed Central

Fan, Di; Dai, Yan; Wang, Xuncheng; Wang, Zhenjie; He, Hang; Yang, Hongchun; Cao, Ying; Deng, Xing Wang; Ma, Ligeng

2012-01-01

Small RNA-directed DNA methylation (RdDM) is an important epigenetic pathway in Arabidopsis that controls the expression of multiple genes and several developmental processes. RNA-DEPENDENT RNA POLYMERASE 2 (RDR2) and DICER-LIKE 3 (DCL3) are necessary factors in 24-nt small interfering RNA (siRNA) biogenesis, which is part of the RdDM pathway. Here, we found that Increase in BONSAI Methylation 1 (IBM1), a conserved JmjC family histone demethylase, is directly associated with RDR2 and DCL3 chromatin. The mutation of IBM1 induced the hypermethylation of H3K9 and DNA non-CG sites within RDR2 and DCL3, which repressed their expression. A genome-wide analysis suggested that the reduction in RDR2 and DCL3 expression affected siRNA biogenesis in a locus-specific manner and disrupted RdDM-directed gene repression. Together, our results suggest that IBM1 regulates gene expression through two distinct pathways: direct association to protect genes from silencing by preventing the coupling of histone and DNA methylation, and indirect silencing of gene expression through RdDM-directed repression. PMID:22772985

Data reduction software for LORAN-C flight test evaluation

NASA Technical Reports Server (NTRS)

Fischer, J. P.

1979-01-01

A set of programs designed to be run on an IBM 370/158 computer to read the recorded time differences from the tape produced by the LORAN data collection system, convert them to latitude/longitude and produce various plotting input files are described. The programs were written so they may be tailored easily to meet the demands of a particular data reduction job. The tape reader program is written in 370 assembler language and the remaining programs are written in standard IBM FORTRAN-IV language. The tape reader program is dependent upon the recording format used by the data collection system and on the I/O macros used at the computing facility. The other programs are generally device-independent, although the plotting routines are dependent upon the plotting method used. The data reduction programs convert the recorded data to a more readily usable form; convert the time difference (TD) numbers to latitude/longitude (lat/long), to format a printed listing of the TDs, lat/long, reference times, and other information derived from the data, and produce data files which may be used for subsequent plotting.

Performance of a parallel thermal-hydraulics code TEMPEST

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fann, G.I.; Trent, D.S.

The authors describe the parallelization of the Tempest thermal-hydraulics code. The serial version of this code is used for production quality 3-D thermal-hydraulics simulations. Good speedup was obtained with a parallel diagonally preconditioned BiCGStab non-symmetric linear solver, using a spatial domain decomposition approach for the semi-iterative pressure-based and mass-conserved algorithm. The test case used here to illustrate the performance of the BiCGStab solver is a 3-D natural convection problem modeled using finite volume discretization in cylindrical coordinates. The BiCGStab solver replaced the LSOR-ADI method for solving the pressure equation in TEMPEST. BiCGStab also solves the coupled thermal energy equation. Scalingmore » performance of 3 problem sizes (221220 nodes, 358120 nodes, and 701220 nodes) are presented. These problems were run on 2 different parallel machines: IBM-SP and SGI PowerChallenge. The largest problem attains a speedup of 68 on an 128 processor IBM-SP. In real terms, this is over 34 times faster than the fastest serial production time using the LSOR-ADI solver.« less

The effect of dynamic topography and gravity on lithospheric effective elastic thickness estimation: a case study

NASA Astrophysics Data System (ADS)

Bai, Yongliang; Dong, Dongdong; Kirby, Jon F.; Williams, Simon E.; Wang, Zhenjie

2018-04-01

Lithospheric effective elastic thickness (Te), a proxy for plate strength, is helpful for the understanding of subduction characteristics. Affected by curvature, faulting and magma activity, lithospheric strength near trenches should be weakened but some regional inversion studies have shown much higher Te values along some trenches than in their surroundings. In order to improve Te estimation accuracy, here we discuss the long-wavelength effect of dynamic topography and gravity on Te estimation by taking the Izu-Bonin-Mariana (IBM) Trench as a case study area. We estimate the long-wavelength influence of the density and negative buoyancy of the subducting slab on observed gravity anomalies and seafloor topography. The residual topography and gravity are used to map Te using the fan-wavelet coherence method. Maps of Te, both with and without the effects of dynamic topography and slab gravity anomaly, contain a band of high-Te values along the IBM Trench, though these values and their errors are lower when slab effects are accounted for. Nevertheless, tests show that the Te map is relatively insensitive to the choice of slab-density modelling method, even though the dynamic topography and slab-induced gravity anomaly vary considerably when the slab density is modelled by different methods. The continued presence of a high-Te band along the trench after application of dynamic corrections shows that, before using 2D inversion methods to estimate Te variations in subduction zones, there are other factors that should be considered besides the slab dynamic effects on the overriding plate.

The effect of dynamic topography and gravity on lithospheric effective elastic thickness estimation: a case study

NASA Astrophysics Data System (ADS)

Bai, Yongliang; Dong, Dongdong; Kirby, Jon F.; Williams, Simon E.; Wang, Zhenjie

2018-07-01

Lithospheric effective elastic thickness (Te), a proxy for plIate strength, is helpful for the understanding of subduction characteristics. Affected by curvature, faulting and magma activity, lithospheric strength near trenches should be weakened but some regional inversion studies have shown much higher Te values along some trenches than in their surroundings. In order to improve Te-estimation accuracy, here we discuss the long-wavelength effect of dynamic topography and gravity on Te estimation by taking the Izu-Bonin-Mariana (IBM) Trench as a case study area. We estimate the long-wavelength influence of the density and negative buoyancy of the subducting slab on observed gravity anomalies and seafloor topography. The residual topography and gravity are used to map Te using the fan-wavelet coherence method. Maps of Te, both with and without the effects of dynamic topography and slab gravity anomaly, contain a band of high-Te values along the IBM Trench, though these values and their errors are lower when slab effects are accounted for. Nevertheless, tests show that the Te map is relatively insensitive to the choice of slab-density modelling method, even though the dynamic topography and slab-induced gravity anomaly vary considerably when the slab density is modelled by different methods. The continued presence of a high-Te band along the trench after application of dynamic corrections shows that, before using 2-D inversion methods to estimate Te variations in subduction zones, there are other factors that should be considered besides the slab dynamic effects on the overriding plate.

Users' manual for computer program for three-dimensional analysis of coupler-cavity traveling wave tubes

NASA Technical Reports Server (NTRS)

Omalley, T. A.

1984-01-01

The use of the coupled cavity traveling wave tube for space communications has led to an increased interest in improving the efficiency of the basic interaction process in these devices through velocity resynchronization and other methods. A flexible, three dimensional, axially symmetric, large signal computer program was developed for use on the IBM 370 time sharing system. A users' manual for this program is included.

PCACE-Personal-Computer-Aided Cabling Engineering

NASA Technical Reports Server (NTRS)

Billitti, Joseph W.

1987-01-01

PCACE computer program developed to provide inexpensive, interactive system for learning and using engineering approach to interconnection systems. Basically database system that stores information as files of individual connectors and handles wiring information in circuit groups stored as records. Directly emulates typical manual engineering methods of handling data, thus making interface between user and program very natural. Apple version written in P-Code Pascal and IBM PC version of PCACE written in TURBO Pascal 3.0

NAVO MSRC Navigator. Spring 2003

DTIC Science & Technology

2003-01-01

computational model run on the IBM POWER4 (MARCELLUS) in support of the Airborne Laser Challenge Project II. The data were visualized using Alias|Wavefront Maya...Turbulence in a Jet Stream in the Airborne Laser Context High Performance Computing 11 Largest NAVO MSRC System Becomes Even Bigger and Better 11 Using the smp...centimeters (cm). The resolution requirement to resolve the microjets and the flow outside in the combustor is too severe for any single numerical method

FMS: A Format Manipulation System for Automatic Production of Natural Language Documents, Second Edition. Final Report.

ERIC Educational Resources Information Center

Silver, Steven S.

FMS/3 is a system for producing hard copy documentation at high speed from free format text and command input. The system was originally written in assembler language for a 12K IBM 360 model 20 using a high speed 1403 printer with the UCS-TN chain option (upper and lower case). Input was from an IBM 2560 Multi-function Card Machine. The model 20…

Balancing Value and Risk in Information Sharing Through Obfuscation

DTIC Science & Technology

2012-09-20

California, Los Angeles Chatschik Bisdikian IBM T.J. Watson Research Center Lance M. Kaplan US Army Research Laboratory Abstract—Fast-paced data-to...AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) IBM T.J. Watson Research...giving us annotations for both the white listed activity detection as well as the black listed activity recognition . We implemented five features

The GF11 project at IBM

NASA Astrophysics Data System (ADS)

Sexton, James C.

1990-08-01

The GF11 project at IBM's T. J. Watson Research Center is entering full production for QCD numerical calculations. This paper describes the GF11 hardware and system software, and discusses the first production program which has been developed to run on GF11. This program is a variation of the Cabbibo Marinari pure gauge Monte Carlo program for SU(3) and is currently sustaining almost 6 gigaflops on 360 processors in GF11.

Menu-Driven Solver Of Linear-Programming Problems

NASA Technical Reports Server (NTRS)

Viterna, L. A.; Ferencz, D.

1992-01-01

Program assists inexperienced user in formulating linear-programming problems. A Linear Program Solver (ALPS) computer program is full-featured LP analysis program. Solves plain linear-programming problems as well as more-complicated mixed-integer and pure-integer programs. Also contains efficient technique for solution of purely binary linear-programming problems. Written entirely in IBM's APL2/PC software, Version 1.01. Packed program contains licensed material, property of IBM (copyright 1988, all rights reserved).

Training Teachers to Use Computers: A Case Study of the Summer Training Component of the IBM/ETS Secondary School Computer Education Program. Research Report.

ERIC Educational Resources Information Center

Stecher, Brian

A training program in computer educationtTested in 89 secondary schools focused on the use of computers as tools in all subject areas. Each school received enough computers and software from IBM to equip a full computer laboratory. The schools were organized into local networks in eight regions and received training and continuing support in these…

97. View of International Business Machine (IBM) digital computer model ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

97. View of International Business Machine (IBM) digital computer model 7090 magnetic core installation, international telephone and telegraph (ITT) Artic Services Inc., Official photograph BMEWS site II, Clear, AK, by unknown photographer, 17 September 1965, BMEWS, clear as negative no. A-6604. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

Extending the Kerberos Protocol for Distributed Data as a Service

DTIC Science & Technology

2012-09-20

exported as a UIMA [11] PEAR file for deployment to IBM Content Analytics (ICA). A UIMA PEAR file is a deployable text analytics “pipeline” (analogous...to a web application packaged in a WAR file). ICA is a text analysis and search application that supports UIMA . The key entities targeted by NLP rules...workbench. [Online]. Available: https: //www.ibm.com/developerworks/community/alphaworks/lrw/ [11] Apache UIMA . [Online]. Available: http

Cell-NPE (Numerical Performance Evaluation): Programming the IBM Cell Broadband Engine -- A General Parallelization Strategy

DTIC Science & Technology

2008-04-01

Space GmbH as follows: B. TECHNICAL PRPOPOSA/DESCRIPTION OF WORK Cell: A Revolutionary High Performance Computing Platform On 29 June 2005 [1...IBM has announced that is has partnered with Mercury Computer Systems, a maker of specialized computers . The Cell chip provides massive floating-point...the computing industry away from the traditional processor technology dominated by Intel. While in the past, the development of computing power has

A Survey of Videodisc Technology.

DTIC Science & Technology

1985-12-01

store images and the microcomputer is used as an interactive and management tool , makes for a powerful teaching system. General Motors was the first...videodisc are used for archival storage of documents. * IBM uses videodisc in over 180 branch offices where they are used both as a presentation tool and to...provide reference material. IBM is also currently working on a videodisc project as a direct training tool for mainten- ance of their computers. A

PREVAIL-EPL alpha tool electron optics subsystem

NASA Astrophysics Data System (ADS)

Pfeiffer, Hans C.; Dhaliwal, Rajinder S.; Golladay, Steven D.; Doran, Samuel K.; Gordon, Michael S.; Kendall, Rodney A.; Lieberman, Jon E.; Pinckney, David J.; Quickle, Robert J.; Robinson, Christopher F.; Rockrohr, James D.; Stickel, Werner; Tressler, Eileen V.

2001-08-01

The IBM/Nikon alliance is continuing pursuit of an EPL stepper alpha tool based on the PREVAIL technology. This paper provides a status report of the alliance activity with particular focus on the Electron Optical Subsystem developed at IBM. We have previously reported on design features of the PREVAIL alpha system. The new state-of-the-art e-beam lithography concepts have since been reduced to practice and turned into functional building blocks of a production level lithography tool. The electron optical alpha tool subsystem has been designed, build, assembled and tested at IBM's Semiconductor Research and Development Center (SRDC) in East Fishkill, New York. After demonstrating subsystem functionality, the electron optical column and all associated control electronics hardware and software have been shipped during January 2001 to Nikon's facility in Kumagaya, Japan, for integration into the Nikon commercial e-beam stepper alpha tool. Early pre-shipment results obtained with this electron optical subsystem are presented.

The IBM Story

NASA Astrophysics Data System (ADS)

Loving, Charles

This chapter explores an actual transition from a product-based company to one where services dominate. That company is IBM and the transition started in the early 1990s. As you will see, the changes do not happen overnight in a "big bang" ­apocalyptic event but more gradually in a series of phases; indeed, at the time of writing (2009), we are almost 20 years into the transition and we know that we are not finished yet. Underneath the headline change from products to services, there are a myriad of other process and procedural changes that have to be made to support the business and allow it to change dynamically in order to meet the needs of its clients, its shareholders and its suppliers. In this chapter, we will show how IBM has responded to these requirements and how it is applying the lessons learnt in this process to create an agenda for innovation in service creation and delivery to address global problems.

Accelerating Climate Simulations Through Hybrid Computing

NASA Technical Reports Server (NTRS)

Zhou, Shujia; Sinno, Scott; Cruz, Carlos; Purcell, Mark

2009-01-01

Unconventional multi-core processors (e.g., IBM Cell B/E and NYIDIDA GPU) have emerged as accelerators in climate simulation. However, climate models typically run on parallel computers with conventional processors (e.g., Intel and AMD) using MPI. Connecting accelerators to this architecture efficiently and easily becomes a critical issue. When using MPI for connection, we identified two challenges: (1) identical MPI implementation is required in both systems, and; (2) existing MPI code must be modified to accommodate the accelerators. In response, we have extended and deployed IBM Dynamic Application Virtualization (DAV) in a hybrid computing prototype system (one blade with two Intel quad-core processors, two IBM QS22 Cell blades, connected with Infiniband), allowing for seamlessly offloading compute-intensive functions to remote, heterogeneous accelerators in a scalable, load-balanced manner. Currently, a climate solar radiation model running with multiple MPI processes has been offloaded to multiple Cell blades with approx.10% network overhead.

COPYCAT; IBM OS system catalog utility routine. [IBM360,370; Assembly language

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engert, D.E.

COPYCAT is an OS utility program designed to produce an efficient system-wide catalog which may reside on many volumes. Substantial improvement in performance may also be obtained on a system with only a single catalog. First, catalog entries from many different catalogs may be redistributed to equalize the load on each catalog. Second, each individual catalog is restructured in a way designed to minimize the I/O time required for searching and updating. Redistribution and restructuring parameters are under user control. Model DSCB's for generation data groups and alias entries are also processed. Catalogs on all direct access devices, including datamore » cells, are supported. Backup copies may also be made.IBM360,370; Assembly language; OS/MVT, OS/MFT, OS/VS1 and OS/VS2 Release 1; A large region size is recommended since COPYCAT will use all of the core available to it for buffers..« less

A survey of the state-of-the-art and focused research in range systems, task 1

NASA Technical Reports Server (NTRS)

Omura, J. K.

1986-01-01

This final report presents the latest research activity in voice compression. We have designed a non-real time simulation system that is implemented around the IBM-PC where the IBM-PC is used as a speech work station for data acquisition and analysis of voice samples. A real-time implementation is also proposed. This real-time Voice Compression Board (VCB) is built around the Texas Instruments TMS-3220. The voice compression algorithm investigated here was described in an earlier report titled, Low Cost Voice Compression for Mobile Digital Radios, by the author. We will assume the reader is familiar with the voice compression algorithm discussed in this report. The VCB compresses speech waveforms at data rates ranging from 4.8 K bps to 16 K bps. This board interfaces to the IBM-PC 8-bit bus, and plugs into a single expansion slot on the mother board.

Image acquisition unit for the Mayo/IBM PACS project

NASA Astrophysics Data System (ADS)

Reardon, Frank J.; Salutz, James R.

1991-07-01

The Mayo Clinic and IBM Rochester, Minnesota, have jointly developed a picture archiving, distribution and viewing system for use with Mayo's CT and MRI imaging modalities. Images are retrieved from the modalities and sent over the Mayo city-wide token ring network to optical storage subsystems for archiving, and to server subsystems for viewing on image review stations. Images may also be retrieved from archive and transmitted back to the modalities. The subsystems that interface to the modalities and communicate to the other components of the system are termed Image Acquisition Units (LAUs). The IAUs are IBM Personal System/2 (PS/2) computers with specially developed software. They operate independently in a network of cooperative subsystems and communicate with the modalities, archive subsystems, image review server subsystems, and a central subsystem that maintains information about the content and location of images. This paper provides a detailed description of the function and design of the Image Acquisition Units.

The IBM PC at NASA Ames

NASA Technical Reports Server (NTRS)

Peredo, James P.

1988-01-01

Like many large companies, Ames relies very much on its computing power to get work done. And, like many other large companies, finding the IBM PC a reliable tool, Ames uses it for many of the same types of functions as other companies. Presentation and clarification needs demand much of graphics packages. Programming and text editing needs require simpler, more-powerful packages. The storage space needed by NASA's scientists and users for the monumental amounts of data that Ames needs to keep demand the best database packages that are large and easy to use. Availability to the Micom Switching Network combines the powers of the IBM PC with the capabilities of other computers and mainframes and allows users to communicate electronically. These four primary capabilities of the PC are vital to the needs of NASA's users and help to continue and support the vast amounts of work done by the NASA employees.

Solving Fluid Structure Interaction Problems with an Immersed Boundary Method

NASA Technical Reports Server (NTRS)

Barad, Michael F.; Brehm, Christoph; Kiris, Cetin C.

2016-01-01

An immersed boundary method for the compressible Navier-Stokes equations can be used for moving boundary problems as well as fully coupled fluid-structure interaction is presented. The underlying Cartesian immersed boundary method of the Launch Ascent and Vehicle Aerodynamics (LAVA) framework, based on the locally stabilized immersed boundary method previously presented by the authors, is extended to account for unsteady boundary motion and coupled to linear and geometrically nonlinear structural finite element solvers. The approach is validated for moving boundary problems with prescribed body motion and fully coupled fluid structure interaction problems. Keywords: Immersed Boundary Method, Higher-Order Finite Difference Method, Fluid Structure Interaction.

An approach to operating system testing

NASA Technical Reports Server (NTRS)

Sum, R. N., Jr.; Campbell, R. H.; Kubitz, W. J.

1984-01-01

To ensure the reliability and performance of a new system, it must be verified or validated in some manner. Currently, testing is the only resonable technique available for doing this. Part of this testing process is the high level system test. System testing is considered with respect to operating systems and in particular UNIX. This consideration results in the development and presentation of a good method for performing the system test. The method includes derivations from the system specifications and ideas for management of the system testing project. Results of applying the method to the IBM System/9000 XENIX operating system test and the development of a UNIX test suite are presented.

Smoothed Particle Hydrodynamics Continuous Boundary Force method for Navier-Stokes equations subject to Robin boundary condition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pan, Wenxiao; Bao, Jie; Tartakovsky, Alexandre M.

2014-02-15

Robin boundary condition for the Navier-Stokes equations is used to model slip conditions at the fluid-solid boundaries. A novel Continuous Boundary Force (CBF) method is proposed for solving the Navier-Stokes equations subject to Robin boundary condition. In the CBF method, the Robin boundary condition at boundary is replaced by the homogeneous Neumann boundary condition at the boundary and a volumetric force term added to the momentum conservation equation. Smoothed Particle Hydrodynamics (SPH) method is used to solve the resulting Navier-Stokes equations. We present solutions for two-dimensional and three-dimensional flows in domains bounded by flat and curved boundaries subject to variousmore » forms of the Robin boundary condition. The numerical accuracy and convergence are examined through comparison of the SPH-CBF results with the solutions of finite difference or finite element method. Taken the no-slip boundary condition as a special case of slip boundary condition, we demonstrate that the SPH-CBF method describes accurately both no-slip and slip conditions.« less

Fully-resolved prolate spheroids in turbulent channel flows: A lattice Boltzmann study

NASA Astrophysics Data System (ADS)

Eshghinejadfard, Amir; Hosseini, Seyed Ali; Thévenin, Dominique

2017-09-01

Particles are present in many natural and industrial multiphase flows. In most practical cases, particle shape is not spherical, leading to additional difficulties for numerical studies. In this paper, DNS of turbulent channel flows with finite-size prolate spheroids is performed. The geometry includes a straight wall-bounded channel at a frictional Reynolds number of 180 seeded with particles. Three different particle shapes are considered, either spheroidal (aspect ratio λ =2 or 4) or spherical (λ =1 ). Solid-phase volume fraction has been varied between 0.75% and 1.5%. Lattice Boltzmann method (LBM) is used to model the fluid flow. The influence of the particles on the flow field is simulated by immersed boundary method (IBM). In this Eulerian-Lagrangian framework, the trajectory of each particle is computed individually. All particle-particle and particle-fluid interactions are considered (four-way coupling). Results show that, in the range of examined volume fractions, mean fluid velocity is reduced by addition of particles. However, velocity reduction by spheroids is much lower than that by spheres; 2% and 1.6%, compared to 4.6%. Maximum streamwise velocity fluctuations are reduced by addition of particle. By comparing particle and fluid velocities, it is seen that spheroids move faster than the fluid before reaching the same speed in the channel center. Spheres, on the other hand, move slower than the fluid in the buffer layer. Close to the wall, all particle types move faster than the fluid. Moreover, prolate spheroids show a preferential orientation in the streamwise direction, which is stronger close to the wall. Far from the wall, the orientation of spheroidal particles tends to isotropy.

Large-eddy simulation/Reynolds-averaged Navier-Stokes hybrid schemes for high speed flows

NASA Astrophysics Data System (ADS)

Xiao, Xudong

Three LES/RANS hybrid schemes have been proposed for the prediction of high speed separated flows. Each method couples the k-zeta (Enstrophy) BANS model with an LES subgrid scale one-equation model by using a blending function that is coordinate system independent. Two of these functions are based on turbulence dissipation length scale and grid size, while the third one has no explicit dependence on the grid. To implement the LES/RANS hybrid schemes, a new rescaling-reintroducing method is used to generate time-dependent turbulent inflow conditions. The hybrid schemes have been tested on a Mach 2.88 flow over 25 degree compression-expansion ramp and a Mach 2.79 flow over 20 degree compression ramp. A special computation procedure has been designed to prevent the separation zone from expanding upstream to the recycle-plane. The code is parallelized using Message Passing Interface (MPI) and is optimized for running on IBM-SP3 parallel machine. The scheme was validated first for a flat plate. It was shown that the blending function has to be monotonic to prevent the RANS region from appearing in the LES region. In the 25 deg ramp case, the hybrid schemes provided better agreement with experiment in the recovery region. Grid refinement studies demonstrated the importance of using a grid independent blend function and further improvement with experiment in the recovery region. In the 20 deg ramp case, with a relatively finer grid, the hybrid scheme characterized by grid independent blending function well predicted the flow field in both the separation region and the recovery region. Therefore, with "appropriately" fine grid, current hybrid schemes are promising for the simulation of shock wave/boundary layer interaction problems.

OAP- OFFICE AUTOMATION PILOT GRAPHICS DATABASE SYSTEM

NASA Technical Reports Server (NTRS)

Ackerson, T.

1994-01-01

The Office Automation Pilot (OAP) Graphics Database system offers the IBM PC user assistance in producing a wide variety of graphs and charts. OAP uses a convenient database system, called a chartbase, for creating and maintaining data associated with the charts, and twelve different graphics packages are available to the OAP user. Each of the graphics capabilities is accessed in a similar manner. The user chooses creation, revision, or chartbase/slide show maintenance options from an initial menu. The user may then enter or modify data displayed on a graphic chart. The cursor moves through the chart in a "circular" fashion to facilitate data entries and changes. Various "help" functions and on-screen instructions are available to aid the user. The user data is used to generate the graphics portion of the chart. Completed charts may be displayed in monotone or color, printed, plotted, or stored in the chartbase on the IBM PC. Once completed, the charts may be put in a vector format and plotted for color viewgraphs. The twelve graphics capabilities are divided into three groups: Forms, Structured Charts, and Block Diagrams. There are eight Forms available: 1) Bar/Line Charts, 2) Pie Charts, 3) Milestone Charts, 4) Resources Charts, 5) Earned Value Analysis Charts, 6) Progress/Effort Charts, 7) Travel/Training Charts, and 8) Trend Analysis Charts. There are three Structured Charts available: 1) Bullet Charts, 2) Organization Charts, and 3) Work Breakdown Structure (WBS) Charts. The Block Diagram available is an N x N Chart. Each graphics capability supports a chartbase. The OAP graphics database system provides the IBM PC user with an effective means of managing data which is best interpreted as a graphic display. The OAP graphics database system is written in IBM PASCAL 2.0 and assembler for interactive execution on an IBM PC or XT with at least 384K of memory, and a color graphics adapter and monitor. Printed charts require an Epson, IBM, OKIDATA, or HP Laser printer (or equivalent). Plots require the Tektronix 4662 Penplotter. Source code is supplied to the user for modification and customizing. Executables are also supplied for all twelve graphics capabilities. This system was developed in 1983, and Version 3.1 was released in 1986.

A Western Pacific Hotspot?

NASA Astrophysics Data System (ADS)

MacPherson, C. G.; Hall, R.

2003-04-01

The petrology of volcanic rocks from the St. Andrew Strait and helium isotope ratios of backarc lavas from the Manus Basin have been used to propose the existence of an active hotspot beneath the eastern Bismarck Sea (Johnson et al., 1978; Macpherson et al., 1998). The past influence of this hotspot can be assessed by mapping its present location onto a plate tectonic reconstruction of the western Pacific (Macpherson and Hall, 2001). During the Middle Eocene the nascent Izu-Bonin-Mariana (IBM) arc lay above the hotspot. The volume of magma emplaced at the IBM arc at that time substantially exceeds the average magma production rate for mature island arcs. Furthermore, the ultramafic (boninitic) character of much of this magmatism requires elevated temperatures. The geochemistry of contemporaneous magmatism in the backarc resembles ocean island basalts and much of the backarc region experienced significant uplift at that time. All of these features can be explained by the influx of hot, buoyant, chemically distinct mantle beneath the IBM and its hinterland. The lithosphere lying above the hotspot during the later Eocene was subsequently subducted. During the Oligo-Miocene the hotspot was traversed by parts of the Caroline Plate where the Euripik Rise is found. This is an aseismic rise that possesses the geophysical characteristics of thickened oceanic crust formed by excess, basaltic magmatism and is the type of structure that would result from the passage of relatively young oceanic lithosphere over a mantle hotspot. Plate reconstruction for the western Pacific predicts a hotspot trail that is consistent with the Middle Eocene and Oligo-Miocene geology of the IBM and Caroline Plates, respectively (Macpherson and Hall, 2001). Parts of the trail have been disrupted by subsequent sea-floor spreading or lost through subduction but the remaining vestiges are consistent with the action of a thermal anomaly throughout much of the Cenozoic. More speculatively, buoyancy differences between the IBM, supported by hot mantle, and older, colder lithosphere of the adjacent Pacific Plate may have provided a mechanism to propagate widespread subduction at the nascent IBM arc. Johnson RW, Smith IEM, &Taylor SR, BMR J. Aus. Geol. Geophys. 3, 55-69, (1978). Macpherson CG, Hilton, DR, Sinton, JM, Poreda RJ &Craig H. Geology 26, 1007-1010, (1998). Macpherson CG &Hall R, Earth Planet. Sci. Lett. 186, 215-230, (2001).

Management Tools

NASA Technical Reports Server (NTRS)

1987-01-01

Manugistics, Inc. (formerly AVYX, Inc.) has introduced a new programming language for IBM and IBM compatible computers called TREES-pls. It is a resource management tool originating from the space shuttle, that can be used in such applications as scheduling, resource allocation project control, information management, and artificial intelligence. Manugistics, Inc. was looking for a flexible tool that can be applied to many problems with minimal adaptation. Among the non-government markets are aerospace, other manufacturing, transportation, health care, food and beverage and professional services.

Conversion of the Aerodynamic Preliminary Analysis System (APAS) to an IBM PC Compatible Format

NASA Technical Reports Server (NTRS)

Kruep, John M.

1995-01-01

The conversion of the Aerodynamic Preliminary Analysis System (APAS) software from a Silicon Graphics UNIX-based platform to a DOS-based IBM PC compatible is discussed. Relevant background information is given, followed by a discussion of the steps taken to accomplish the conversion and a discussion of the type of problems encountered during the conversion. A brief comparison of aerodynamic data obtained using APAS with data from another source is also made.

Flow Characteristics of a Multiple Nozzle Exhaust Gas Eductor System.

DTIC Science & Technology

1981-03-01

these exhaust gases are a temperatures significantly above those of conventionally powered ships. A few of the problems caused by these high temperatures ...systems designed for marine gas turbine applications must substantially cool exhaust gases , present an exterior stack surface temperature which will not...stack in. H 02 R - Gas constant for air, 53.34 ft-lbf/Ibm-R s - Entropy, Btu/Ibm-R S - Primary dimension of mixing stack T - Absolute temperature , R

Interprocess Communication Protocols for Computer Networks

DTIC Science & Technology

1975-12-01

this value without maintaining any state information about itp partner CCP. The receiving CCP returns a SYN giving its own ISN, or can reject...34Packet Arrival and Buffer Statistics in a Packet Switching Node," IBM Research Report RZ 594 {.s;Zni02),. September 1973. [Cochi73] B. J. Cochi...rwid 0. P. Karp, "Protocol for a Computer Netuork," IBM Sustem Journa! 12. 1, 1973, pp. 94-105. [ricKen2ie741 A. fl. McKenzie

Networking DEC and IBM computers

NASA Technical Reports Server (NTRS)

Mish, W. H.

1983-01-01

Local Area Networking of DEC and IBM computers within the structure of the ISO-OSI Seven Layer Reference Model at a raw signaling speed of 1 Mops or greater are discussed. After an introduction to the ISO-OSI Reference Model nd the IEEE-802 Draft Standard for Local Area Networks (LANs), there follows a detailed discussion and comparison of the products available from a variety of manufactures to perform this networking task. A summary of these products is presented in a table.

Current status of the joint Mayo Clinic-IBM PACS project

NASA Astrophysics Data System (ADS)

Hangiandreou, Nicholas J.; Williamson, Byrn, Jr.; Gehring, Dale G.; Persons, Kenneth R.; Reardon, Frank J.; Salutz, James R.; Felmlee, Joel P.; Loewen, M. D.; Forbes, Glenn S.

1994-05-01

A multi-phase collaboration between Mayo Clinic and IBM-Rochester was undertaken, with the goal of developing a picture archiving and communication system for routine clinical use in the Radiology Department. The initial phase of this project (phase 0) was started in 1988. The current system has been fully integrated into the clinical practice and, to date, over 6.5 million images from 16 imaging modalities have been archived. Phase 3 of this project has recently concluded.

A System Description of the Cocaine Trade

DTIC Science & Technology

1994-01-01

72 C.17. Drug Market Hirarchy Tables (Cells A112 to N155) ............ 74 C.18. Purity Levels (Cells A156 to E71...This report also provides detailed information on how to use the model. The spreadsheets are available for either IBM (DOS) or Apple -based machines upon...red square (IBM) or arrow ( Apple ) in the upper right- hand corner have a note "behind" the cell explaining something about the data in the cell, or if

Designing a handwashing station for infrastructure-restricted communities in Bangladesh using the integrated behavioural model for water, sanitation and hygiene interventions (IBM-WASH)

PubMed Central

2013-01-01

Background In Bangladesh diarrhoeal disease and respiratory infections contribute significantly to morbidity and mortality. Handwashing with soap reduces the risk of infection; however, handwashing rates in infrastructure-restricted settings remain low. Handwashing stations – a dedicated, convenient location where both soap and water are available for handwashing – are associated with improved handwashing practices. Our aim was to identify a locally feasible and acceptable handwashing station that enabled frequent handwashing for two subsequent randomized trials testing the health effects of this behaviour. Methods We conducted formative research in the form of household trials of improved practices in urban and rural Bangladesh. Seven candidate handwashing technologies were tested by nine to ten households each during two iterative phases. We conducted interviews with participants during an introductory visit and two to five follow up visits over two to six weeks, depending on the phase. We used the Integrated Behavioural Model for Water, Sanitation and Hygiene (IBM-WASH) to guide selection of candidate handwashing stations and data analysis. Factors presented in the IBM-WASH informed thematic coding of interview transcripts and contextualized feasibility and acceptability of specific handwashing station designs. Results Factors that influenced selection of candidate designs were market availability of low cost, durable materials that were easy to replace or replenish in an infrastructure-restricted and shared environment. Water storage capacity, ease of use and maintenance, and quality of materials determined the acceptability and feasibility of specific handwashing station designs. After examining technology, psychosocial and contextual factors, we selected a handwashing system with two different water storage capacities, each with a tap, stand, basin, soapy water bottle and detergent powder for pilot testing in preparation for the subsequent randomized trials. Conclusions A number of contextual, psychosocial and technological factors influence use of handwashing stations at five aggregate levels, from habitual to societal. In interventions that require a handwashing station to facilitate frequent handwashing with soap, elements of the technology, such as capacity, durability and location(s) within the household are key to high feasibility and acceptability. More than one handwashing station per household may be required. IBM-WASH helped guide the research and research in-turn helped validate the framework. PMID:24060247

Relationship between X(5) models and the interacting boson model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barea, Jose; Departamento de Fisica Atomica, Molecular y Nuclear, Facultad de Fisica, Universidad de Sevilla, Apartado 1065, E-41080 Sevilla; Arias, Jose M.

2010-08-15

The connections between the X(5) models [the original X(5) using an infinite square well, X(5)-{beta}{sup 8}, X(5)-{beta}{sup 6}, X(5)-{beta}{sup 4}, and X(5)-{beta}{sup 2}], based on particular solutions of the geometrical Bohr Hamiltonian with harmonic potential in the {gamma} degree of freedom, and the interacting boson model (IBM) are explored. This work is the natural extension of the work presented in Garcia-Ramos and Arias, Phys. Rev. C 77, 054307 (2008) for the E(5) models. For that purpose, a quite general one- and two-body IBM Hamiltonian is used and a numerical fit to the different X(5) model energies is performed; then themore » obtained wave functions are used to calculate B(E2) transition rates. It is shown that within the IBM one can reproduce well the results for energies and B(E2) transition rates obtained with all these X(5) models, although the agreement is not so impressive as for the E(5) models. From the fitted IBM parameters the corresponding energy surface can be extracted and, surprisingly, only the X(5) case corresponds in the moderately large N limit to an energy surface very close to the one expected for a critical point, whereas the rest of models are situated a little further away.« less

An IBM-compatible program for interactive three-dimensional gravity modeling

NASA Astrophysics Data System (ADS)

Broome, John

1992-04-01

G3D is a 3-D interactive gravity modeling program for IBM-compatible microcomputers. The program allows a model to be created interactively by defining multiple tabular bodies with horizontal tops and bottoms. The resulting anomaly is calculated using Plouff's algorithm at up to 2000 predefined random or regularly located points. In order to display the anomaly as a color image, the point data are interpolated onto a regular grid and quantized into discrete intervals. Observed and residual gravity field images also can be generated. Adjustments to the model are made using a graphics cursor to move, insert, and delete body points or whole bodies. To facilitate model changes, planview body outlines can be overlain on any of the gravity field images during editing. The model's geometry can be displayed in planview or along a user-defined vertical section. G3D is written in Microsoft® FORTRAN and utilizes the Halo-Professional® (or Halo-88®) graphics subroutine library. The program is written for use on an IBM-compatible microcomputer equipped with hard disk, numeric coprocessor, and VGA, Number Nine Revolution (Halo-88® only), or TIGA® compatible graphics cards. A mouse or digitizing tablet is recommended for cursor positioning. Program source code, a user's guide, and sample data are available as Geological Survey of Canada Open File (G3D: A Three-dimensional Gravity Modeling Program for IBM-compatible Microcomputers).

A mechanistic Individual-based Model of microbial communities.

PubMed

Jayathilake, Pahala Gedara; Gupta, Prashant; Li, Bowen; Madsen, Curtis; Oyebamiji, Oluwole; González-Cabaleiro, Rebeca; Rushton, Steve; Bridgens, Ben; Swailes, David; Allen, Ben; McGough, A Stephen; Zuliani, Paolo; Ofiteru, Irina Dana; Wilkinson, Darren; Chen, Jinju; Curtis, Tom

2017-01-01

Accurate predictive modelling of the growth of microbial communities requires the credible representation of the interactions of biological, chemical and mechanical processes. However, although biological and chemical processes are represented in a number of Individual-based Models (IbMs) the interaction of growth and mechanics is limited. Conversely, there are mechanically sophisticated IbMs with only elementary biology and chemistry. This study focuses on addressing these limitations by developing a flexible IbM that can robustly combine the biological, chemical and physical processes that dictate the emergent properties of a wide range of bacterial communities. This IbM is developed by creating a microbiological adaptation of the open source Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS). This innovation should provide the basis for "bottom up" prediction of the emergent behaviour of entire microbial systems. In the model presented here, bacterial growth, division, decay, mechanical contact among bacterial cells, and adhesion between the bacteria and extracellular polymeric substances are incorporated. In addition, fluid-bacteria interaction is implemented to simulate biofilm deformation and erosion. The model predicts that the surface morphology of biofilms becomes smoother with increased nutrient concentration, which agrees well with previous literature. In addition, the results show that increased shear rate results in smoother and more compact biofilms. The model can also predict shear rate dependent biofilm deformation, erosion, streamer formation and breakup.

A mechanistic Individual-based Model of microbial communities

PubMed Central

Gupta, Prashant; Li, Bowen; Madsen, Curtis; Oyebamiji, Oluwole; González-Cabaleiro, Rebeca; Rushton, Steve; Bridgens, Ben; Swailes, David; Allen, Ben; McGough, A. Stephen; Zuliani, Paolo; Ofiteru, Irina Dana; Wilkinson, Darren; Chen, Jinju; Curtis, Tom

2017-01-01

Accurate predictive modelling of the growth of microbial communities requires the credible representation of the interactions of biological, chemical and mechanical processes. However, although biological and chemical processes are represented in a number of Individual-based Models (IbMs) the interaction of growth and mechanics is limited. Conversely, there are mechanically sophisticated IbMs with only elementary biology and chemistry. This study focuses on addressing these limitations by developing a flexible IbM that can robustly combine the biological, chemical and physical processes that dictate the emergent properties of a wide range of bacterial communities. This IbM is developed by creating a microbiological adaptation of the open source Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS). This innovation should provide the basis for “bottom up” prediction of the emergent behaviour of entire microbial systems. In the model presented here, bacterial growth, division, decay, mechanical contact among bacterial cells, and adhesion between the bacteria and extracellular polymeric substances are incorporated. In addition, fluid-bacteria interaction is implemented to simulate biofilm deformation and erosion. The model predicts that the surface morphology of biofilms becomes smoother with increased nutrient concentration, which agrees well with previous literature. In addition, the results show that increased shear rate results in smoother and more compact biofilms. The model can also predict shear rate dependent biofilm deformation, erosion, streamer formation and breakup. PMID:28771505

Galerkin's Method and the Double P$sub 1$ approximation for Thermal Flux Calculation; IL METODO DI GALERKIN E LA DOPPIA P$sub 1$ PER IL CALCOLO DEL FLUSSO TERMICO

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daneri, A.; Daneri, A.

1964-01-01

The program DESTHEC DP, in FORTRAN MONITOR for the IBM 7090, solves the transport equation for thermal neutrons in slab geometry. For the energy, Galerkin's method with the double P/sub 1/ approximation is used, Comparison shows good agreement between DESTHEC DP results and results obtained by the THERMOS program, which solves the transport equation in integral form. The theory is presented, and input and output are discussed. Numerical results are included, as well as the program listing. (D.C.W.)

SPECIFIC HEAT DATA ANALYSIS PROGRAM FOR THE IBM 704 DIGITAL COMPUTER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roach, P.R.

1962-01-01

A computer program was developed to calculate the specific heat of a substance in the temperature range from 0.3 to 4.2 deg K, given temperature calibration data for a carbon resistance thermometer, experimental temperature drift, and heating period data. The speciftc heats calculated from these data are then fitted by a curve by the methods of least squares and the specific heats are corrected for the effect of the curvature of the data. The method, operation, program details, and program stops are discussed. A program listing is included. (M.C.G.)

Geochemical Relationships between Volcanic and Plutonic Upper to Mid Crustal Exposures of the Rosario Segment, Alisitos Arc (Baja California, Mexico): An Outstanding Field Analog to the Izu-Bonin-Mariana Arc

NASA Astrophysics Data System (ADS)

Morris, R.; DeBari, S. M.; Busby, C. J.; Medynski, S.

2015-12-01

Exposed paleo-arcs, such as the Rosario segment of the Cretaceous Alisitos Arc in Baja California, Mexico, provide an opportunity to explore the evolution of arc crust through time. Remarkable 3-D exposures of the Rosario segment record crustal generation processes in the volcanic rocks and underlying plutonic rocks. In this study, we explore the physical and geochemical connection between the plutonic and volcanic sections of the extensional Alisitos Arc, and elucidate differentiation processes responsible for generating them. These results provide an outstanding analog for extensional active arc systems, such as the Izu-Bonin-Mariana (IBM) Arc. Upper crustal volcanic rocks have a coherent stratigraphy that is 3-5 km thick and ranges in composition from basalt to dacite. The most felsic compositions (70.9% SiO2) are from a welded ignimbrite unit. The most mafic compositions (51.5% SiO2, 3.2% MgO) are found in basaltic sill-like units. Phenocrysts in the volcanic units include plagioclase +/- amphibole and clinopyroxene. The transition to deeper plutonic rocks is clearly an intrusive boundary, where plutonic units intrude the volcanic units. Plutonic rocks are dominantly a quartz diorite main phase with a more mafic, gabbroic margin. A transitional zone is observed along the contact between the plutonic and volcanic rocks, where volcanics have coarsely recrystallized textures. Mineral assemblages in the plutonic units include plagioclase +/- quartz, biotite, amphibole, clinopyroxene and orthopyroxene. Most, but not all, samples are low K. REE patterns are relatively flat with limited enrichment. Normalization diagrams show LILE enrichment and HFSE depletion, where trends are similar to average IBM values. We interpret plutonic and volcanic units to have similar geochemical relationships, where liquid lines of descent show the evolution of least to most evolved magma types. We provide a model for the formation and magmatic evolution of the Alisitos Arc.

The Golden Age of Software Architecture: A Comprehensive Survey

DTIC Science & Technology

2006-02-01

UML [14], under the leadership of (at the time) Rational, has integrated a number of design notations and developed a method for applying them...yes 97 survey, model Garlan. Research directions in SA [28] 54 yes 93 specific domains Cremer et al. The SA for scenario control in the Iowa...Environment of the Domain-Specific Software Architecture Project, ADAGE-IBM-92-11, Version 2.0, November, 1993 [23] J. Cremer , J. Kearney, Y. Papelis, and

Long Endurance Underwater Power System

DTIC Science & Technology

1989-09-01

Figures 7.3 through 7.8. Data analysis was done using the Excel spreadsheet program on an IBM compatible computer -w.d utsported to a MALcintosh for...shall be compared with data obtained from non-leaking gill carridges for a mor complete analysis . 4) The pump attached to the test setup was not...BACKGROUND 5 V. ANALYSIS 6 VI. RESULTS AND CONCLUSIONS 6 )Preferred Method 7 VI. REFERENCES 11 App- nd.x-.1 12 SECTION - II ALWATT HY.HG•N GENERATOR I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fuller, L.C.

The ORCENT-II digital computer program will perform calculations at valves-wide-open design conditions, maximum guaranteed rating conditions, and an approximation of part-load conditions for steam turbine cycles supplied with throttle steam characteristic of contemporary light-water reactors. Turbine performance calculations are based on a method published by the General Electric Company. Output includes all information normally shown on a turbine-cycle heat balance diagram. The program is written in FORTRAN IV for the IBM System 360 digital computers at the Oak Ridge National Laboratory.

Microcomputer system for receiving and processing of satellite TOVS/TIP data for vertical sounding of the atmosphere

NASA Astrophysics Data System (ADS)

Baranski, L. A.; Rozemski, K.

TOVS/TIP digital data transmitted at the VHF-BEACON range from NOAA satellites are receiving and processing at the SDRPC. Receiving station is connected with the microcomputer IBM-PC/AT which process TOVS/TIP data via two states: initial data processing and retrieval of vertical profiles of the temperature, water vapour and ozone mixing ratio in the atmosphere. Receiving and processing equipment, retrieval methods, results and error discussion are presented.

Computer Aided Method for System Safety and Reliability Assessments

DTIC Science & Technology

2008-09-01

program between 1998 and 2003. This tool was not marketed in the public domain after the CRV program ended. The other tool is called eXpress, and it...support Government reviewed and approved analyses methodologies which can 5 then be shared with other government agencies and industry partners...Documented for B&R, UP&L, EPRI 30 DEC 80 GO IBM Version Enhanced at UCC , Dallas, Descriptors, Facility to Alter Array Sizes, Explanation of Use 1 SEP 82

Up-to-date state of storage techniques used for large numerical data files

NASA Technical Reports Server (NTRS)

Chlouba, V.

1975-01-01

Methods for data storage and output in data banks and memory files are discussed along with a survey of equipment available for this. Topics discussed include magnetic tapes, magnetic disks, Terabit magnetic tape memory, Unicon 690 laser memory, IBM 1360 photostore, microfilm recording equipment, holographic recording, film readers, optical character readers, digital data storage techniques, and photographic recording. The individual types of equipment are summarized in tables giving the basic technical parameters.

High performance computing enabling exhaustive analysis of higher order single nucleotide polymorphism interaction in Genome Wide Association Studies.

PubMed

Goudey, Benjamin; Abedini, Mani; Hopper, John L; Inouye, Michael; Makalic, Enes; Schmidt, Daniel F; Wagner, John; Zhou, Zeyu; Zobel, Justin; Reumann, Matthias

2015-01-01

Genome-wide association studies (GWAS) are a common approach for systematic discovery of single nucleotide polymorphisms (SNPs) which are associated with a given disease. Univariate analysis approaches commonly employed may miss important SNP associations that only appear through multivariate analysis in complex diseases. However, multivariate SNP analysis is currently limited by its inherent computational complexity. In this work, we present a computational framework that harnesses supercomputers. Based on our results, we estimate a three-way interaction analysis on 1.1 million SNP GWAS data requiring over 5.8 years on the full "Avoca" IBM Blue Gene/Q installation at the Victorian Life Sciences Computation Initiative. This is hundreds of times faster than estimates for other CPU based methods and four times faster than runtimes estimated for GPU methods, indicating how the improvement in the level of hardware applied to interaction analysis may alter the types of analysis that can be performed. Furthermore, the same analysis would take under 3 months on the currently largest IBM Blue Gene/Q supercomputer "Sequoia" at the Lawrence Livermore National Laboratory assuming linear scaling is maintained as our results suggest. Given that the implementation used in this study can be further optimised, this runtime means it is becoming feasible to carry out exhaustive analysis of higher order interaction studies on large modern GWAS.

Simulating functional magnetic materials on supercomputers.

PubMed

Gruner, Markus Ernst; Entel, Peter

2009-07-22

The recent passing of the petaflop per second landmark by the Roadrunner project at the Los Alamos National Laboratory marks a preliminary peak of an impressive world-wide development in the high-performance scientific computing sector. Also, purely academic state-of-the-art supercomputers such as the IBM Blue Gene/P at Forschungszentrum Jülich allow us nowadays to investigate large systems of the order of 10(3) spin polarized transition metal atoms by means of density functional theory. Three applications will be presented where large-scale ab initio calculations contribute to the understanding of key properties emerging from a close interrelation between structure and magnetism. The first two examples discuss the size dependent evolution of equilibrium structural motifs in elementary iron and binary Fe-Pt and Co-Pt transition metal nanoparticles, which are currently discussed as promising candidates for ultra-high-density magnetic data storage media. However, the preference for multiply twinned morphologies at smaller cluster sizes counteracts the formation of a single-crystalline L1(0) phase, which alone provides the required hard magnetic properties. The third application is concerned with the magnetic shape memory effect in the Ni-Mn-Ga Heusler alloy, which is a technologically relevant candidate for magnetomechanical actuators and sensors. In this material strains of up to 10% can be induced by external magnetic fields due to the field induced shifting of martensitic twin boundaries, requiring an extremely high mobility of the martensitic twin boundaries, but also the selection of the appropriate martensitic structure from the rich phase diagram.

Immersed boundary-simplified lattice Boltzmann method for incompressible viscous flows

NASA Astrophysics Data System (ADS)

Chen, Z.; Shu, C.; Tan, D.

2018-05-01

An immersed boundary-simplified lattice Boltzmann method is developed in this paper for simulations of two-dimensional incompressible viscous flows with immersed objects. Assisted by the fractional step technique, the problem is resolved in a predictor-corrector scheme. The predictor step solves the flow field without considering immersed objects, and the corrector step imposes the effect of immersed boundaries on the velocity field. Different from the previous immersed boundary-lattice Boltzmann method which adopts the standard lattice Boltzmann method (LBM) as the flow solver in the predictor step, a recently developed simplified lattice Boltzmann method (SLBM) is applied in the present method to evaluate intermediate flow variables. Compared to the standard LBM, SLBM requires lower virtual memories, facilitates the implementation of physical boundary conditions, and shows better numerical stability. The boundary condition-enforced immersed boundary method, which accurately ensures no-slip boundary conditions, is implemented as the boundary solver in the corrector step. Four typical numerical examples are presented to demonstrate the stability, the flexibility, and the accuracy of the present method.

Chaperone-mediated autophagy components are upregulated in sporadic inclusion-body myositis muscle fibres.

PubMed

Cacciottolo, M; Nogalska, A; D'Agostino, C; Engel, W K; Askanas, V

2013-12-01

Sporadic inclusion-body myositis (s-IBM) is an age-associated degenerative muscle disease. Characteristic features are muscle-fibre vacuolization and intramuscle-fibre accumulations of multiprotein aggregates, which may result from the demonstrated impairments of the 26S proteasome and autophagy. Chaperone-mediated autophagy (CMA) is a selective form of lysosomal degradation targeting proteins carrying the KFERQ motif. Lysosome-associated membrane protein type 2A (LAMP2A) and the heat-shock cognate protein 70 (Hsc70) constitute specific CMA components. Neither CMA components nor CMA activity has been studied in normal or disease human muscle, to our knowledge. We studied CMA components by immunocytochemistry, immunoblots, real-time PCR and immunoprecipitation in: (a) 16 s-IBM, nine aged-matched normal and nine disease control muscle biopsies; and (b) cultured human muscle fibres (CHMFs) with experimentally inhibited activities of either the 26S proteasome or autophagy. Compared with age-matched controls, in s-IBM muscle, LAMP2A and Hsc70 were on a given transverse section accumulated as aggregates in approximately 5% of muscle fibres, where they (a) colocalized with each other and α-synuclein (α-syn), a CMA-targeted protein; and (b) were bound to each other and to α-syn by immunoprecipitation. By immunoblots, LAMP2A was increased sevenfold P < 0.001 and Hsc70 2.6-fold P < 0.05. LAMP2A mRNA was increased 4.4-fold P < 0.001 and Hsc70 mRNA 1.9-fold P < 0.05. In CHMFs inhibition of either the 26S proteasome or autophagy induced CMA, evidenced by a significant increase of both LAMP2A and Hsc70. Our study demonstrates, for the first time, up-regulation of CMA components in s-IBM muscle, and it provides further evidence that altered protein degradation is likely an important pathogenic aspect in s-IBM. © 2013 British Neuropathological Society.

Gap models and their individual-based relatives in the assessment of the consequences of global change

NASA Astrophysics Data System (ADS)

Shugart, Herman H.; Wang, Bin; Fischer, Rico; Ma, Jianyong; Fang, Jing; Yan, Xiaodong; Huth, Andreas; Armstrong, Amanda H.

2018-03-01

Individual-based models (IBMs) of complex systems emerged in the 1960s and early 1970s, across diverse disciplines from astronomy to zoology. Ecological IBMs arose with seemingly independent origins out of the tradition of understanding the ecosystems dynamics of ecosystems from a ‘bottom-up’ accounting of the interactions of the parts. Individual trees are principal among the parts of forests. Because these models are computationally demanding, they have prospered as the power of digital computers has increased exponentially over the decades following the 1970s. This review will focus on a class of forest IBMs called gap models. Gap models simulate the changes in forests by simulating the birth, growth and death of each individual tree on a small plot of land. The summation of these plots comprise a forest (or set of sample plots on a forested landscape or region). Other, more aggregated forest IBMs have been used in global applications including cohort-based models, ecosystem demography models, etc. Gap models have been used to provide the parameters for these bulk models. Currently, gap models have grown from local-scale to continental-scale and even global-scale applications to assess the potential consequences of climate change on natural forests. Modifications to the models have enabled simulation of disturbances including fire, insect outbreak and harvest. Our objective in this review is to provide the reader with an overview of the history, motivation and applications, including theoretical applications, of these models. In a time of concern over global changes, gap models are essential tools to understand forest responses to climate change, modified disturbance regimes and other change agents. Development of forest surveys to provide the starting points for simulations and better estimates of the behavior of the diversity of tree species in response to the environment are continuing needs for improvement for these and other IBMs.

A Fault-Oblivious Extreme-Scale Execution Environment (FOX)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Hensbergen, Eric; Speight, William; Xenidis, Jimi

IBM Research’s contribution to the Fault Oblivious Extreme-scale Execution Environment (FOX) revolved around three core research deliverables: • collaboration with Boston University around the Kittyhawk cloud infrastructure which both enabled a development and deployment platform for the project team and provided a fault-injection testbed to evaluate prototypes • operating systems research focused on exploring role-based operating system technologies through collaboration with Sandia National Labs on the NIX research operating system and collaboration with the broader IBM Research community around a hybrid operating system model which became known as FusedOS • IBM Research also participated in an advisory capacity with themore » Boston University SESA project, the core of which was derived from the K42 operating system research project funded in part by DARPA’s HPCS program. Both of these contributions were built on a foundation of previous operating systems research funding by the Department of Energy’s FastOS Program. Through the course of the X-stack funding we were able to develop prototypes, deploy them on production clusters at scale, and make them available to other researchers. As newer hardware, in the form of BlueGene/Q, came online, we were able to port the prototypes to the new hardware and release the source code for the resulting prototypes as open source to the community. In addition to the open source coded for the Kittyhawk and NIX prototypes, we were able to bring the BlueGene/Q Linux patches up to a more recent kernel and contribute them for inclusion by the broader Linux community. The lasting impact of the IBM Research work on FOX can be seen in its effect on the shift of IBM’s approach to HPC operating systems from Linux and Compute Node Kernels to role-based approaches as prototyped by the NIX and FusedOS work. This impact can be seen beyond IBM in follow-on ideas being incorporated into the proposals for the Exasacale Operating Systems/Runtime program.« less

Comparison of individual-based model output to data using a model of walleye pollock early life history in the Gulf of Alaska

NASA Astrophysics Data System (ADS)

Hinckley, Sarah; Parada, Carolina; Horne, John K.; Mazur, Michael; Woillez, Mathieu

2016-10-01

Biophysical individual-based models (IBMs) have been used to study aspects of early life history of marine fishes such as recruitment, connectivity of spawning and nursery areas, and marine reserve design. However, there is no consistent approach to validating the spatial outputs of these models. In this study, we hope to rectify this gap. We document additions to an existing individual-based biophysical model for Alaska walleye pollock (Gadus chalcogrammus), some simulations made with this model and methods that were used to describe and compare spatial output of the model versus field data derived from ichthyoplankton surveys in the Gulf of Alaska. We used visual methods (e.g. distributional centroids with directional ellipses), several indices (such as a Normalized Difference Index (NDI), and an Overlap Coefficient (OC), and several statistical methods: the Syrjala method, the Getis-Ord Gi* statistic, and a geostatistical method for comparing spatial indices. We assess the utility of these different methods in analyzing spatial output and comparing model output to data, and give recommendations for their appropriate use. Visual methods are useful for initial comparisons of model and data distributions. Metrics such as the NDI and OC give useful measures of co-location and overlap, but care must be taken in discretizing the fields into bins. The Getis-Ord Gi* statistic is useful to determine the patchiness of the fields. The Syrjala method is an easily implemented statistical measure of the difference between the fields, but does not give information on the details of the distributions. Finally, the geostatistical comparison of spatial indices gives good information of details of the distributions and whether they differ significantly between the model and the data. We conclude that each technique gives quite different information about the model-data distribution comparison, and that some are easy to apply and some more complex. We also give recommendations for a multistep process to validate spatial output from IBMs.

On the Formulation of Weakly Singular Displacement/Traction Integral Equations; and Their Solution by the MLPG Method

NASA Technical Reports Server (NTRS)

Atluri, Satya N.; Shen, Shengping

2002-01-01

In this paper, a very simple method is used to derive the weakly singular traction boundary integral equation based on the integral relationships for displacement gradients. The concept of the MLPG method is employed to solve the integral equations, especially those arising in solid mechanics. A moving Least Squares (MLS) interpolation is selected to approximate the trial functions in this paper. Five boundary integral Solution methods are introduced: direct solution method; displacement boundary-value problem; traction boundary-value problem; mixed boundary-value problem; and boundary variational principle. Based on the local weak form of the BIE, four different nodal-based local test functions are selected, leading to four different MLPG methods for each BIE solution method. These methods combine the advantages of the MLPG method and the boundary element method.

ETARA - EVENT TIME AVAILABILITY, RELIABILITY ANALYSIS

NASA Technical Reports Server (NTRS)

Viterna, L. A.

1994-01-01

The ETARA system was written to evaluate the performance of the Space Station Freedom Electrical Power System, but the methodology and software can be modified to simulate any system that can be represented by a block diagram. ETARA is an interactive, menu-driven reliability, availability, and maintainability (RAM) simulation program. Given a Reliability Block Diagram representation of a system, the program simulates the behavior of the system over a specified period of time using Monte Carlo methods to generate block failure and repair times as a function of exponential and/or Weibull distributions. ETARA can calculate availability parameters such as equivalent availability, state availability (percentage of time at a particular output state capability), continuous state duration and number of state occurrences. The program can simulate initial spares allotment and spares replenishment for a resupply cycle. The number of block failures are tabulated both individually and by block type. ETARA also records total downtime, repair time, and time waiting for spares. Maintenance man-hours per year and system reliability, with or without repair, at or above a particular output capability can also be calculated. The key to using ETARA is the development of a reliability or availability block diagram. The block diagram is a logical graphical illustration depicting the block configuration necessary for a function to be successfully accomplished. Each block can represent a component, a subsystem, or a system. The function attributed to each block is considered for modeling purposes to be either available or unavailable; there are no degraded modes of block performance. A block does not have to represent physically connected hardware in the actual system to be connected in the block diagram. The block needs only to have a role in contributing to an available system function. ETARA can model the RAM characteristics of systems represented by multilayered, nesting block diagrams. There are no restrictions on the number of total blocks or on the number of blocks in a series, parallel, or M-of-N parallel subsystem. In addition, the same block can appear in more than one subsystem if such an arrangement is necessary for an accurate model. ETARA 3.3 is written in APL2 for IBM PC series computers or compatibles running MS-DOS and the APL2 interpreter. Hardware requirements for the APL2 system include 640K of RAM, 2Mb of extended memory, and an 80386 or 80486 processor with an 80x87 math co-processor. The standard distribution medium for this package is a set of two 5.25 inch 360K MS-DOS format diskettes. A sample executable is included. The executable contains licensed material from the APL2 for the IBM PC product which is program property of IBM; Copyright IBM Corporation 1988 - All rights reserved. It is distributed with IBM's permission. The contents of the diskettes are compressed using the PKWARE archiving tools. The utility to unarchive the files, PKUNZIP.EXE, is included. ETARA was developed in 1990 and last updated in 1991.

ΔI = 4 Bifurcation and the sdg Interacting Boson Model

NASA Astrophysics Data System (ADS)

Liu, Yu-Xin; Sun, Hong-Zhou; Zhao, En-Guang

1997-01-01

We show that the superdeformed nuclear states can be described in the framework of the interacting boson model (IBM) with the g-bosons being taken into account in this paper. The ΔI = 4 bifurcation in superdeformed rotational bands can be reproduced in the SU(5) limit of the sdg IBM. The perturbation causing the ΔI = 4 bifurcation to emerge in the ΔI = 2 superdeformed rotational band may possess the SU(5) symmetry. The project supported by National Natural Science Foundation of China

B(IS4; 0{GS/+}→4{/γ +}) systematics in rare-earth nuclei: SUsdg (3) description

NASA Astrophysics Data System (ADS)

Devi, Y. D.; Kota, V. K. B.

1993-12-01

The observed variation of B(IS4; 0{GS/+}→{/γ +}) with mass number A, that gives information about hexadecupole component in γ-vibration, in rare-earth nuclei is studied in the SUsdg (3) limit of sdg interacting boson model employing IBM-2 to IBM-1 projected hexadecupole transition operator with effective charges determined using a multi- j shell mapping procedure. The SUsdg (3) limit provides a reasonably good description of the data.

A Comparison of Priority-based and Incremental Real-Time Garbage Collectors in the Implementation of the Shadow Design Pattern

DTIC Science & Technology

2008-08-15

running the real-time application we used in our previous study on IBM WebSphere Real Time. IBM WebSphere Real Time automatically sets Metronome , its...the experiment show that the modified code for the Shadow Design Pattern runs well under Metronome . 15. NUMBER OF PAGES 25 14. SUBJECT TERMS...includes the real-time garbage collector called the Metronome . Unlike the Sun RTGC, we cannot change the priority of the Metronome RTGC. Metronome is

Saturn Apollo Program

NASA Image and Video Library

1968-01-01

This view depicts engineers conducting a system test on the Saturn V instrument unit (IU) at International Business Machines (IBM) in Huntsville, Alabama. IBM is a prime contractor for development and fabrication of the IU. The IU is vital to the proper flight of the vehicle. It contains navigation, guidance, control, and sequencing equipment for the launch vehicle. Three-feet tall, twenty-one feet in diameter, and weighing about 4,000 pounds, the IU is mounted atop the S-IVB (third) stage, between the S-IVB stage and the Apollo spacecraft.

A SLAM II simulation model for analyzing space station mission processing requirements

NASA Technical Reports Server (NTRS)

Linton, D. G.

1985-01-01

Space station mission processing is modeled via the SLAM 2 simulation language on an IBM 4381 mainframe and an IBM PC microcomputer with 620K RAM, two double-sided disk drives and an 8087 coprocessor chip. Using a time phased mission (payload) schedule and parameters associated with the mission, orbiter (space shuttle) and ground facility databases, estimates for ground facility utilization are computed. Simulation output associated with the science and applications database is used to assess alternative mission schedules.

Maintenance Manual for AUDIT. A System for Analyzing SESCOMP Software. Volume 4: Appendix D. Listings of the AUDIT Software for the IBM 360.

DTIC Science & Technology

1977-08-01

The AUDIT documentation provides the maintenance programmer personnel with the information to effectively maintain and use the AUDIT software. The ...SESCOMPSPEC’s) and produces reports detailing the deviations from those standards. The AUDIT software also examines a program unit to detect and report...changes in word length on the output of computer programs. This report contains the listings of the AUDIT software for the IBM 360. (Author)

Measurement and Analysis of the Noise Radiated by Low Mach Numbers Centrifugal Blowers

DTIC Science & Technology

1987-11-01

Lang, V Manager of the IBM Poughkeepsie Acoustics Laboratory, for his understanding and support. I would also like to express my gratitude to the IBM...ficl.l. Knowlede p of these quantities provides important information on the relative strength of thL :cro- a dynamic noise sources on the blade... manageability . The model blower design was thus determined by scaling all of the linear dimensions of the reference device by 2.0 and by maintaining • all of

An IBM-3 analysis of the nuclei just beyond the magic numbers N = Z = 28

NASA Astrophysics Data System (ADS)

Elliott, J. P.; Evans, J. A.; Lac, V. S.; Long, G. L.

1996-02-01

The isospin-invariant form IBM-3 of the interacting boson model has been used to study energies and electromagnetic properties of the isotopes of nickel, zinc, germanium and selenium in the first half of the 1p {3}/{2}, 0f {5}/{2} and 1p {1}/{2} shell. The hamiltonian and electromagnetic operators vary with boson number and isospin in a manner determined by a mapping into the shell-model based on seniority and reduced isospin.

Engineering PFLOTRAN for Scalable Performance on Cray XT and IBM BlueGene Architectures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mills, Richard T; Sripathi, Vamsi K; Mahinthakumar, Gnanamanika

We describe PFLOTRAN - a code for simulation of coupled hydro-thermal-chemical processes in variably saturated, non-isothermal, porous media - and the approaches we have employed to obtain scalable performance on some of the largest scale supercomputers in the world. We present detailed analyses of I/O and solver performance on Jaguar, the Cray XT5 at Oak Ridge National Laboratory, and Intrepid, the IBM BlueGene/P at Argonne National Laboratory, that have guided our choice of algorithms.

Six Month Oral Toxicity Study of WR238605 Succinate in Rats. Volume 1

DTIC Science & Technology

1996-02-02

expressed on the basis of mg base/kg/day. Statistical analyses was performed on an IBM • compatible computer using the commercially available LabCat... iTP (F) tA/G *BUN tTBA(M/F?) Hematology1 NE *RBC(F) iHCT(F) *HGB(F) tMETHGB *PLT(M) i RBC...1 A-2 Part 1: Identity, Purity and Stability of Neat WR238605 Succinate 0bjttaTO IBM ! The objective of this study was to confirm the identity and

Operating System For Numerically Controlled Milling Machine

NASA Technical Reports Server (NTRS)

Ray, R. B.

1992-01-01

OPMILL program is operating system for Kearney and Trecker milling machine providing fast easy way to program manufacture of machine parts with IBM-compatible personal computer. Gives machinist "equation plotter" feature, which plots equations that define movements and converts equations to milling-machine-controlling program moving cutter along defined path. System includes tool-manager software handling up to 25 tools and automatically adjusts to account for each tool. Developed on IBM PS/2 computer running DOS 3.3 with 1 MB of random-access memory.

An Amphibious Ship-To-Shore Simulation for Use on an IBM PC (Personal Computer)

DTIC Science & Technology

1984-09-01

CA : «< <- j Special ■ *- amphibious ship- an IBM Personal ion of the phy- he logic used analysis, and a DD | JAM 11 1473 COITION...research, for instance, wiL1 be geared toward a technically oriented person who is familiar with computers, programming and the associated logic. A...problem, often vaguely stated by the decision aaker , into precise and operational terms [Ref. Hz p.51]. The analysis begins with specification of the

Low temperature Grüneisen parameter of cubic ionic crystals

NASA Astrophysics Data System (ADS)

Batana, Alicia; Monard, María C.; Rosario Soriano, María

1987-02-01

Title of program: CAROLINA Catalogue number: AATG Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland (see application form in this issue) Computer: IBM/370, Model 158; Installation: Centro de Tecnología y Ciencia de Sistemas, Universidad de Buenos Aires Operating system: VM/370 Programming language used: FORTRAN High speed storage required: 3 kwords No. of bits in a word: 32 Peripherals used: disk IBM 3340/70 MB No. of lines in combined program and test deck: 447

Evaluation of a Coast Guard Marine Portable Inspection Unit (MPIU).

DTIC Science & Technology

1994-09-01

38 4.4.1 Focus on Details . ................................... 38 4.4.2 System-Based vs . Compartment-Based Software Organization ..... 38 4.4.3...laptop computer (an IBM ThinkPad 300); the other system was based on a larger pen-based computer which could also serve as a laptop (the Compaq...batteries or from an AC power supply. Battery life is up to 3 hrs and the battery can be changed "on the fly" without data loss. 13 The IBM ThinkPad 300

An iterative kernel based method for fourth order nonlinear equation with nonlinear boundary condition

NASA Astrophysics Data System (ADS)

Azarnavid, Babak; Parand, Kourosh; Abbasbandy, Saeid

2018-06-01

This article discusses an iterative reproducing kernel method with respect to its effectiveness and capability of solving a fourth-order boundary value problem with nonlinear boundary conditions modeling beams on elastic foundations. Since there is no method of obtaining reproducing kernel which satisfies nonlinear boundary conditions, the standard reproducing kernel methods cannot be used directly to solve boundary value problems with nonlinear boundary conditions as there is no knowledge about the existence and uniqueness of the solution. The aim of this paper is, therefore, to construct an iterative method by the use of a combination of reproducing kernel Hilbert space method and a shooting-like technique to solve the mentioned problems. Error estimation for reproducing kernel Hilbert space methods for nonlinear boundary value problems have yet to be discussed in the literature. In this paper, we present error estimation for the reproducing kernel method to solve nonlinear boundary value problems probably for the first time. Some numerical results are given out to demonstrate the applicability of the method.

Stress-intensity factor calculations using the boundary force method

NASA Technical Reports Server (NTRS)

Tan, P. W.; Raju, I. S.; Newman, J. C., Jr.

1987-01-01

The Boundary Force Method (BFM) was formulated for the three fundamental problems of elasticity: the stress boundary value problem, the displacement boundary value problem, and the mixed boundary value problem. Because the BFM is a form of an indirect boundary element method, only the boundaries of the region of interest are modeled. The elasticity solution for the stress distribution due to concentrated forces and a moment applied at an arbitrary point in a cracked infinite plate is used as the fundamental solution. Thus, unlike other boundary element methods, here the crack face need not be modeled as part of the boundary. The formulation of the BFM is described and the accuracy of the method is established by analyzing a center-cracked specimen subjected to mixed boundary conditions and a three-hole cracked configuration subjected to traction boundary conditions. The results obtained are in good agreement with accepted numerical solutions. The method is then used to generate stress-intensity solutions for two common cracked configurations: an edge crack emanating from a semi-elliptical notch, and an edge crack emanating from a V-notch. The BFM is a versatile technique that can be used to obtain very accurate stress intensity factors for complex crack configurations subjected to stress, displacement, or mixed boundary conditions. The method requires a minimal amount of modeling effort.

Vectorized and multitasked solution of the few-group neutron diffusion equations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zee, S.K.; Turinsky, P.J.; Shayer, Z.

1989-03-01

A numerical algorithm with parallelism was used to solve the two-group, multidimensional neutron diffusion equations on computers characterized by shared memory, vector pipeline, and multi-CPU architecture features. Specifically, solutions were obtained on the Cray X/MP-48, the IBM-3090 with vector facilities, and the FPS-164. The material-centered mesh finite difference method approximation and outer-inner iteration method were employed. Parallelism was introduced in the inner iterations using the cyclic line successive overrelaxation iterative method and solving in parallel across lines. The outer iterations were completed using the Chebyshev semi-iterative method that allows parallelism to be introduced in both space and energy groups. Formore » the three-dimensional model, power, soluble boron, and transient fission product feedbacks were included. Concentrating on the pressurized water reactor (PWR), the thermal-hydraulic calculation of moderator density assumed single-phase flow and a closed flow channel, allowing parallelism to be introduced in the solution across the radial plane. Using a pinwise detail, quarter-core model of a typical PWR in cycle 1, for the two-dimensional model without feedback the measured million floating point operations per second (MFLOPS)/vector speedups were 83/11.7. 18/2.2, and 2.4/5.6 on the Cray, IBM, and FPS without multitasking, respectively. Lower performance was observed with a coarser mesh, i.e., shorter vector length, due to vector pipeline start-up. For an 18 x 18 x 30 (x-y-z) three-dimensional model with feedback of the same core, MFLOPS/vector speedups of --61/6.7 and an execution time of 0.8 CPU seconds on the Cray without multitasking were measured. Finally, using two CPUs and the vector pipelines of the Cray, a multitasking efficiency of 81% was noted for the three-dimensional model.« less

The impact of the customer relationship management on organizational productivity, customer trust and satisfaction by using the structural equation model: A study in the Iranian hospitals

PubMed Central

Yaghoubi, Maryam; Asgari, Hamed; Javadi, Marzieh

2017-01-01

Context: One of the challenges in the fiercely competitive space of health organizations is responding to customers and building trust and satisfaction in them in the shortest time, with best quality and highest productivity. Hence the aim of this study is to survey the impact of customer relationship management (CRM) on organizational productivity, customer loyalty, satisfaction and trust in selected hospitals of Isfahan (in Iran). Materials and Methods: This study is a correlation descriptive research. Study population was the nurses in selected hospitals of Isfahan and the sampling has been conducted using stratified random method. Data collection tool is a researcher-made questionnaire of CRM and its effects (organizational productivity, customer loyalty, satisfaction and trust) which its validity and reliability has been confirmed by researchers. Structural equation method was used to determine the impact of variables. Data analysis method was structural equation modeling and the software used was SPSS version 16 (IBM, SPSS, 2007 Microsoft Corp., Bristol, UK) and AMOS version 18 (IBM, SPSS, 2010 Microsoft Corp, Bristol, UK). Results: Among the dimensions of CRM, diversification had the highest impact (0.83) and customer acquisition had the lowest (0.57) CRM, had the lowest impact on productivity (0.59) and the highest effect on customer satisfaction (0.83). Conclusions: For the implementation of CRM, it is necessary that the studied hospitals improve strategies of acquiring information about new customers, attracting new customers and keeping them and communication with patients outside the hospital and improve the system of measuring patient satisfaction and loyalty. PMID:28546971

MOLECULAR DESIGNER: an interactive program for the display of protein structure on the IBM-PC.

PubMed

Hannon, G J; Jentoft, J E

1985-09-01

A BASIC interactive graphics program has been developed for the IBM-PC which utilizes the graphics capabilities of that computer to display and manipulate protein structure from coordinates. Structures may be generated from typed files, or from Brookhaven National Laboratories' Protein Data Bank data tapes. Once displayed, images may be rotated, translated and expanded to any desired size. Figures may be viewed as ball-and-stick or space-filling models. Calculated multiple-point perspective may also be added to the display. Docking manipulations are possible since more than a single figure may be displayed and manipulated simultaneously. Further, stereo images and red/blue three-dimensional images may be generated using the accompanying DESIPLOT program and an HP-7475A plotter. A version of the program is also currently available for the Apple Macintosh. Full implementation on the Macintosh requires 512 K and at least one disk drive. Otherwise this version is essentially identical to the IBM-PC version described herein.

Specification and preliminary design of an array processor

NASA Technical Reports Server (NTRS)

Slotnick, D. L.; Graham, M. L.

1975-01-01

The design of a computer suited to the class of problems typified by the general circulation of the atmosphere was investigated. A fundamental goal was that the resulting machine should have roughly 100 times the computing capability of an IBM 360/95 computer. A second requirement was that the machine should be programmable in a higher level language similar to FORTRAN. Moreover, the new machine would have to be compatible with the IBM 360/95 since the IBM machine would continue to be used for pre- and post-processing. A third constraint was that the cost of the new machine was to be significantly less than that of other extant machines of similar computing capability, such as the ILLIAC IV and CDC STAR. A final constraint was that it should be feasible to fabricate a complete system and put it in operation by early 1978. Although these objectives were generally met, considerable work remains to be done on the routing system.

Generalized Information Architecture for Managing Requirements in IBM?s Rational DOORS(r) Application.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aragon, Kathryn M.; Eaton, Shelley M.; McCornack, Marjorie Turner

When a requirements engineering effort fails to meet expectations, often times the requirements management tool is blamed. Working with numerous project teams at Sandia National Laboratories over the last fifteen years has shown us that the tool is rarely the culprit; usually it is the lack of a viable information architecture with well- designed processes to support requirements engineering. This document illustrates design concepts with rationale, as well as a proven information architecture to structure and manage information in support of requirements engineering activities for any size or type of project. This generalized information architecture is specific to IBM's Rationalmore » DOORS (Dynamic Object Oriented Requirements System) software application, which is the requirements management tool in Sandia's CEE (Common Engineering Environment). This generalized information architecture can be used as presented or as a foundation for designing a tailored information architecture for project-specific needs. It may also be tailored for another software tool. Version 1.0 4 November 201« less

Performance assessment of KORAT-3D on the ANL IBM-SP computer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alexeyev, A.V.; Zvenigorodskaya, O.A.; Shagaliev, R.M.

1999-09-01

The TENAR code is currently being developed at the Russian Federal Nuclear Center (VNIIEF) as a coupled dynamics code for the simulation of transients in VVER and RBMK systems and other nuclear systems. The neutronic module in this code system is KORAT-3D. This module is also one of the most computationally intensive components of the code system. A parallel version of KORAT-3D has been implemented to achieve the goal of obtaining transient solutions in reasonable computational time, particularly for RBMK calculations that involve the application of >100,000 nodes. An evaluation of the KORAT-3D code performance was recently undertaken on themore » Argonne National Laboratory (ANL) IBM ScalablePower (SP) parallel computer located in the Mathematics and Computer Science Division of ANL. At the time of the study, the ANL IBM-SP computer had 80 processors. This study was conducted under the auspices of a technical staff exchange program sponsored by the International Nuclear Safety Center (INSC).« less

User's guide: Programs for processing altimeter data over inland seas

NASA Technical Reports Server (NTRS)

Au, A. Y.; Brown, R. D.; Welker, J. E.

1989-01-01

The programs described were developed to process GEODYN-formatted satellite altimeter data, and to apply the processed results to predict geoid undulations and gravity anomalies of inland sea areas. These programs are written in standard FORTRAN 77 and are designed to run on the NSESCC IBM 3081(MVS) computer. Because of the experimental nature of these programs they are tailored to the geographical area analyzed. The attached program listings are customized for processing the altimeter data over the Black Sea. Users interested in the Caspian Sea data are expected to modify each program, although the required modifications are generally minor. Program control parameters are defined in the programs via PARAMETER statements and/or DATA statements. Other auxiliary parameters, such as labels, are hard-wired into the programs. Large data files are read in or written out through different input or output units. The program listings of these programs are accompanied by sample IBM job control language (JCL) images. Familiarity with IBM JCL and the TEMPLATE graphic package is assumed.

Restoration of hemodynamics in apnea struggle phase in association with involuntary breathing movements.

PubMed

Palada, Ivan; Bakovic, Darija; Valic, Zoran; Obad, Ante; Ivancev, Vladimir; Eterovic, Davor; Shoemaker, J Kevin; Dujic, Zeljko

2008-04-30

Involuntary breathing movements (IBM) that occur in the struggle phase of maximal apneas produce waves of negative intrathoracic pressure. This could augment the venous return, increasing thereby the cardiac output and gas exchange, and release the fresh blood from venous pools of spleen and liver. To test these hypotheses we used photoplethysmography and ultrasound for assessment of hemodynamics and spleen size before, during and after maximal dry apneas at large lung volume in 7 trained divers. During the easy-going phase cardiac output was reduced about 40%, due to reduction in stroke volume and in presence of reduced inferior vena cava venous return, while the spleen contracted for about 60 ml. Towards the end of the struggle phase, in presence of intense IBM, the spleen volume further decreased for about 70 ml, while cardiac output and caval flow almost renormalized. In conclusion, IBM coincide with splenic volume reduction and restoration of hemodynamics, likely facilitating the use of the last oxygen reserves before apnea cessation.

Analysis of a dual-reflector antenna system using physical optics and digital computers

NASA Technical Reports Server (NTRS)

Schmidt, R. F.

1972-01-01

The application of physical-optics diffraction theory to a deployable dual-reflector geometry is discussed. The methods employed are not restricted to the Conical-Gregorian antenna, but apply in a general way to dual and even multiple reflector systems. Complex vector wave methods are used in the Fresnel and Fraunhofer regions of the reflectors. Field amplitude, phase, polarization data, and time average Poynting vectors are obtained via an IBM 360/91 digital computer. Focal region characteristics are plotted with the aid of a CalComp plotter. Comparison between the GSFC Huygens wavelet approach, JPL measurements, and JPL computer results based on the near field spherical wave expansion method are made wherever possible.

Parallel Implementation of the Discontinuous Galerkin Method

NASA Technical Reports Server (NTRS)

Baggag, Abdalkader; Atkins, Harold; Keyes, David

1999-01-01

This paper describes a parallel implementation of the discontinuous Galerkin method. Discontinuous Galerkin is a spatially compact method that retains its accuracy and robustness on non-smooth unstructured grids and is well suited for time dependent simulations. Several parallelization approaches are studied and evaluated. The most natural and symmetric of the approaches has been implemented in all object-oriented code used to simulate aeroacoustic scattering. The parallel implementation is MPI-based and has been tested on various parallel platforms such as the SGI Origin, IBM SP2, and clusters of SGI and Sun workstations. The scalability results presented for the SGI Origin show slightly superlinear speedup on a fixed-size problem due to cache effects.