Skeletal dosimetry for external exposure to photons based on µCT images of spongiosa from different bone sites

NASA Astrophysics Data System (ADS)

Kramer, R.; Khoury, H. J.; Vieira, J. W.; Kawrakow, I.

2007-11-01

Micro computed tomography (µCT) images of human spongiosa have recently been used for skeletal dosimetry with respect to external exposure to photon radiation. In this previous investigation, the calculation of equivalent dose to the red bone marrow (RBM) and to the bone surface cells (BSC) was based on five different clusters of micro matrices derived from µCT images of vertebrae, and the BSC equivalent dose for 10 µm thickness of the BSC layer was determined using an extrapolation method. The purpose of this study is to extend the earlier investigation by using µCT images from eight different bone sites and by introducing an algorithm for the direct calculation of the BSC equivalent dose with sub-micro voxel resolution. The results show that for given trabecular bone volume fractions (TBVFs) the whole-body RBM equivalent dose does not depend on bone site-specific properties or imaging parameters. However, this study demonstrates that apart from the TBVF and the BSC layer thickness, the BSC equivalent dose additionally depends on a so-called trabecular bone structure (TBS) effect, i.e. that the contribution of photo-electrons released in trabecular bone to the BSC equivalent dose also depends on the bone site-specific structure of the trabeculae. For a given bone site, the TBS effect is also a function of the thickness of the BSC layer, and it could be shown that this effect would disappear almost completely, should the BSC layer thickness be raised from 10 to 50 µm, according to new radiobiological findings.

[Balanced scorecard for performance measurement of a nursing organization in a Korean hospital].

PubMed

Hong, Yoonmi; Hwang, Kyung Ja; Kim, Mi Ja; Park, Chang Gi

2008-02-01

The purpose of this study was to develop a balanced scorecard (BSC) for performance measurement of a Korean hospital nursing organization and to evaluate the validity and reliability of performance measurement indicators. Two hundred fifty-nine nurses in a Korean hospital participated in a survey questionnaire that included 29-item performance evaluation indicators developed by investigators of this study based on the Kaplan and Norton's BSC (1992). Cronbach's alpha was used to test the reliability of the BSC. Exploratory and confirmatory factor analysis with a structure equation model (SEM) was applied to assess the construct validity of the BSC. Cronbach's alpha of 29 items was .948. Factor analysis of the BSC showed 5 principal components (eigen value >1.0) which explained 62.7% of the total variance, and it included a new one, community service. The SEM analysis results showed that 5 components were significant for the hospital BSC tool. High degree of reliability and validity of this BSC suggests that it may be used for performance measurements of a Korean hospital nursing organization. Future studies may consider including a balanced number of nurse managers and staff nurses in the study. Further data analysis on the relationships among factors is recommended.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shi, J.; Xue, X.

A comprehensive 3D CFD model is developed for a bi-electrode supported cell (BSC) SOFC. The model includes complicated transport phenomena of mass/heat transfer, charge (electron and ion) migration, and electrochemical reaction. The uniqueness of the modeling study is that functionally graded porous electrode property is taken into account, including not only linear but nonlinear porosity distributions. Extensive numerical analysis is performed to elucidate the effects of both porous microstructure distributions and operating condition on cell performance. Results indicate that cell performance is strongly dependent on both operating conditions and porous microstructure distributions of electrodes. Using the proposed fuel/gas feeding design,more » the uniform hydrogen distribution within porous anode is achieved; the oxygen distribution within the cathode is dependent on porous microstructure distributions as well as pressure loss conditions. Simulation results show that fairly uniform temperature distribution can be obtained with the proposed fuel/gas feeding design. The modeling results can be employed to guide experimental design of BSC test and provide pre-experimental analysis, as a result, to circumvent high cost associated with try-and-error experimental design and setup.« less

SATCOM antenna siting study on P-3C aircraft, volume 1

NASA Technical Reports Server (NTRS)

Bensman, D. A.; Marhefka, R. J.

1991-01-01

The NEC-BSC (Basic Scattering Code) was used to study the performance of a SATCOM antenna on a P-3C aircraft. After plate cylinder fields are added to version 3.1 of the NEC-BSC, it is shown that the NEC-BSC can be used to accurately predict the performance of a SATCOM antenna system on a P-3C aircraft. The study illustrates that the NEC-BSC gives good results when compared with scale model measurements provided by Boeing and Lockheed.

Variability of physicochemical and mineralogical characteristics of biological soil crusts at local scale in the Sahelian zone of western Niger

NASA Astrophysics Data System (ADS)

Cancès, B.; Gommeaux, G.; Marin, B.; Ponthieu, M.; Ralahimanana, C.; Ayachi, S.; Malam Issa, O.

2012-04-01

Biological soil crusts (BSC) are organo-mineral complexes resulting from the colonisation of soil surface by living microorganisms, mainly cyanobacteria. Their form, structure and composition vary depending on characteristics related to soils, biological composition and external factors (climate conditions and land uses). This study focussed on the influence of soil characteristics and human activities on BSC properties. BSC samples from Banizoumbou (Niger) taken on protected (ungrazed) and opened (grazed) fallow lands were analysed. BSC characteristics were investigated by using chemical and mineralogical techniques, microscopic and image analysis approach as well as measurements of chlorophyll a content. Hydrophobicity measurements were also performed by the water drop penetration time method. On the basis of their colour, two types of crusts have been identified : black BSC, which occur in protected and unprotected fallow, and red BSC, which only occur in depression zones of the protected fallow. The black crusts are dominated by quartz grains trapped in the network of the filaments of Cyanobacteria. A sandy texture and a reverse grading of mineral particles are typical of physical soil crusts called sieving crusts. The dark surface coloration of the BSC is related to the high density of filamentous Cyanobacteria. Black crusts samples from protected fallow exhibit high biomass related to high cover, whereas samples from grazed fallow lands showed low biomass related to low surface cover. In both cases, hydrophobicity measurements revealed that these BSC are wettable to slightlty water repellent. However, higher values of hydrophobicity were observed on ungrazed samples compared to their grazed counterpart. This variability is likely due to the difference of cover between the two types of samples. This type of BSC corresponds to a later successional stage than the red-coloured BSC. The red BSC has a loamy-sandy texture and a normal grading typical of physical soil crusts called depositional crusts. Its mineralogy differs from the black crusts by its higher proportions of clay minerals and iron oxides (higher amounts of Al2O3 and Fe2O3). A vertical succession of BSC leads to higher content of organic carbon. The trace elements contents are also higher in this type of crust. The red colour is related to the low surface cover by Cyanobacteria. High values of hydrophobicity were measured for the red crusts, which are slightly to strongly water repellent. Compared to the underlying soil horizons, the two types of BSC differ granulometrically (higher proportions of clay and loam), mineralogically and chemically (lower SiO2 content and higher Al2O3, Fe2O3, organic carbon and trace elements contents). These results will contribute to the understanding of water dynamics at the surface of soil in the Sahelian region of Niger. They will also contribute in understanding the potential ecological roles and the spatial extent of BSC in Sahelian environment.

POST-PROCESSING ANALYSIS FOR THC SEEPAGE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Y. SUN

This report describes the selection of water compositions for the total system performance assessment (TSPA) model of results from the thermal-hydrological-chemical (THC) seepage model documented in ''Drift-Scale THC Seepage Model'' (BSC 2004 [DIRS 169856]). The selection has been conducted in accordance with ''Technical Work Plan for: Near-Field Environment and Transport: Coupled Processes (Mountain-Scale TH/THC/THM, Drift-Scale THC Seepage, and Post-Processing Analysis for THC Seepage) Report Integration'' (BSC 2004 [DIRS 171334]). This technical work plan (TWP) was prepared in accordance with AP-2.27Q, ''Planning for Science Activities''. Section 1.2.3 of the TWP describes planning information pertaining to the technical scope, content, and managementmore » of this report. The post-processing analysis for THC seepage (THC-PPA) documented in this report provides a methodology for evaluating the near-field compositions of water and gas around a typical waste emplacement drift as these relate to the chemistry of seepage, if any, into the drift. The THC-PPA inherits the conceptual basis of the THC seepage model, but is an independently developed process. The relationship between the post-processing analysis and other closely related models, together with their main functions in providing seepage chemistry information for the Total System Performance Assessment for the License Application (TSPA-LA), are illustrated in Figure 1-1. The THC-PPA provides a data selection concept and direct input to the physical and chemical environment (P&CE) report that supports the TSPA model. The purpose of the THC-PPA is further discussed in Section 1.2. The data selection methodology of the post-processing analysis (Section 6.2.1) was initially applied to results of the THC seepage model as presented in ''Drift-Scale THC Seepage Model'' (BSC 2004 [DIRS 169856]). Other outputs from the THC seepage model (DTN: LB0302DSCPTHCS.002 [DIRS 161976]) used in the P&CE (BSC 2004 [DIRS 169860], Section 6.6) were also subjected to the same initial selection. The present report serves as a full documentation of this selection and also provides additional analyses in support of the choice of waters selected for further evaluation in ''Engineered Barrier System: Physical and Chemical Environment'' (BSC 2004 [DIRS 169860], Section 6.6). The work scope for the studies presented in this report is described in the TWP (BSC 2004 [DIRS 171334]) and other documents cited above and can be used to estimate water and gas compositions near waste emplacement drifts. Results presented in this report were submitted to the Technical Data Management System (TDMS) under specific data tracking numbers (DTNs) as listed in Appendix A. The major change from previous selection of results from the THC seepage model is that the THC-PPA now considers data selection in space around the modeled waste emplacement drift, tracking the evolution of pore-water and gas-phase composition at the edge of the dryout zone around the drift. This post-processing analysis provides a scientific background for the selection of potential seepage water compositions.« less

Predictability of the Arctic sea ice edge

NASA Astrophysics Data System (ADS)

Goessling, H. F.; Tietsche, S.; Day, J. J.; Hawkins, E.; Jung, T.

2016-02-01

Skillful sea ice forecasts from days to years ahead are becoming increasingly important for the operation and planning of human activities in the Arctic. Here we analyze the potential predictability of the Arctic sea ice edge in six climate models. We introduce the integrated ice-edge error (IIEE), a user-relevant verification metric defined as the area where the forecast and the "truth" disagree on the ice concentration being above or below 15%. The IIEE lends itself to decomposition into an absolute extent error, corresponding to the common sea ice extent error, and a misplacement error. We find that the often-neglected misplacement error makes up more than half of the climatological IIEE. In idealized forecast ensembles initialized on 1 July, the IIEE grows faster than the absolute extent error. This means that the Arctic sea ice edge is less predictable than sea ice extent, particularly in September, with implications for the potential skill of end-user relevant forecasts.

78 FR 15369 - Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-11

... Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR) In accordance with... Prevention (CDC), and the Director, Office of Public Health Preparedness and Response (OPHPR), concerning... BSC deliberation on the following topics: Public Health Preparedness and Response Policy Updates...

[Application of the balanced scorecard in nursing practice].

PubMed

Huang, Tsai-Yu; Chwo, Miao-Ju

2004-02-01

Kaplan and Norton's balanced scorecard (BSC) was developed in 1992. It was designed to be both a performance framework and a management methodology. The BSC enables an organization to convert its mission and vision into specific strategic objectives across four perspectives: (1) the financial perspective, (2) the customer perspective, (3) the internal business process perspective, and (4) the learning and growth perspective. Emphasis is focused on the balance of internal and external, outcome and future, and subjective and objective measures. Currently, some health care organizations have implemented the concept of the BSC as a performance measurement tool and are convinced that the BSC can be of great value to an organization. This paper provides development of the BSC and its application in the health care system and nursing practice.

Biological soil crusts exhibit a dynamic response to seasonal rain and release from grazing with implications for soil stability

USGS Publications Warehouse

Jimenez, Aguilar A.; Huber-Sannwald, E.; Belnap, J.; Smart, D.R.; Arredondo, Moreno J.T.

2009-01-01

In Northern Mexico, long-term grazing has substantially degraded semiarid landscapes. In semiarid systems, ecological and hydrological processes are strongly coupled by patchy plant distribution and biological soil crust (BSC) cover in plant-free interspaces. In this study, we asked: 1) how responsive are BSC cover/composition to a drying/wetting cycle and two-year grazing removal, and 2) what are the implications for soil erosion? We characterized BSC morphotypes and their influence on soil stability under grazed/non-grazed conditions during a dry and wet season. Light- and dark-colored cyanobacteria were dominant at the plant tussock and community level. Cover changes in these two groups differed after a rainy season and in response to grazing removal. Lichens with continuous thalli were more vulnerable to grazing than those with semi-continuous/discontinuous thalli after the dry season. Microsites around tussocks facilitated BSC colonization compared to interspaces. Lichen and cyanobacteria morphotypes differentially enhanced resistance to soil erosion; consequently, surface soil stability depends on the spatial distribution of BSC morphotypes, suggesting soil stability may be as dynamic as changes in the type of BSC cover. Longer-term spatially detailed studies are necessary to elicit spatiotemporal dynamics of BSC communities and their functional role in biotically and abiotically variable environments. ?? 2009 Elsevier Ltd.

Habitat stress initiates changes in composition, CO2 gas exchange and C-allocation as life traits in biological soil crusts.

PubMed

Colesie, Claudia; Green, T G Allan; Haferkamp, Ilka; Büdel, Burkhard

2014-10-01

Biological soil crusts (BSC) are the dominant functional vegetation unit in some of the harshest habitats in the world. We assessed BSC response to stress through changes in biotic composition, CO2 gas exchange and carbon allocation in three lichen-dominated BSC from habitats with different stress levels, two more extreme sites in Antarctica and one moderate site in Germany. Maximal net photosynthesis (NP) was identical, whereas the water content to achieve maximal NP was substantially lower in the Antarctic sites, this apparently being achieved by changes in biomass allocation. Optimal NP temperatures reflected local climate. The Antarctic BSC allocated fixed carbon (tracked using (14)CO2) mostly to the alcohol soluble pool (low-molecular weight sugars, sugar alcohols), which has an important role in desiccation and freezing resistance and antioxidant protection. In contrast, BSC at the moderate site showed greater carbon allocation into the polysaccharide pool, indicating a tendency towards growth. The results indicate that the BSC of the more stressed Antarctic sites emphasise survival rather than growth. Changes in BSC are adaptive and at multiple levels and we identify benefits and risks attached to changing life traits, as well as describing the ecophysiological mechanisms that underlie them.

Establishment proper of the balanced scorecard indicators to support decision making in a university: a case study in Institut Teknologi Indonesia

NASA Astrophysics Data System (ADS)

Theresia, L.; Lahuddin, A. H.; Bangun, R.

2017-12-01

Balanced Scorecard (BSC) is a powerful tool in decision making process. Nevertheless, it is not rare that the BSC does not give satisfactory results because the indicators chosen do not reflect the needs of the organization. Therefore, indicator establishment is very crucial in the utilization of BSC. This research aims to determine the indicators BSC for a university and the research is a case study in Institut Teknologi Indonesia (ITI). In this study, BSC structure and indicators, comparison made by 4 previous researchers was used as the initial guide to determine the structure and indicators of ITI. And then, questionnaires were distributed to selected respondents and a focus group discussion (FGD) was conducted in order to produce indicators of BSC based on the mental model of the ITI. It is found 15 indicators based on the mental model of ITI. Furthermore, the relationships between the indicators are seen as dynamic relationships, and by using system dynamics, some feedback loops that are considered critical to organizational success can be identified and isolated.

Success factors for implementation of the balanced scorecard in a NHS multi-agency setting.

PubMed

Radnor, Zoe; Lovell, Bill

2003-01-01

Even though the balanced scorecard (BSC) has become a highly popular performance management tool, usage in local public sector National Health Service (NHS) organisations is still rare. This paper conditionally outlines some grounds in supporting such usage. In particular underlying conceptual concerns with the BSC system and its implementation pitfalls require full consideration. This paper then outlines some factors to be taken into account for "successful" BSC implementation in a NHS multi-agency setting. These findings emerged from a series of focus groups that took place with contributors drawn from all the key organisations within the Bradford Health Action Zone. Finally, this paper argues that if key criteria are met, successful implementation of the BSC may then proceed. However, "blind" BSC implementation without consideration of these factors may result in potential "failure".

Effects of an Early Successional Biological Soil Crust from a Temperate Coastal Sand Dune (NE Germany) on Soil Elemental Stoichiometry and Phosphatase Activity.

PubMed

Schaub, Iris; Baum, Christel; Schumann, Rhena; Karsten, Ulf

2018-06-20

Early successional biological soil crusts (BSCs), a consortium of bacteria, cyanobacteria, and other microalgae, are one of the first settlement stages on temperate coastal sand dunes. In this study, we investigated the algal biomass (Chlorophyll a (Chl a)), algal (C algal ) and microbial carbon (C mic ), elemental stoichiometry (C:N:P), and acid and alkaline phosphatase activity (AcidPA and AlkPA) of two algae-dominated BSCs from a coastal white dune (northeast Germany, on the southwestern Baltic Sea) which differed in the exposure to wind forces. The dune sediment (DS) was generally low in total carbon (TC), nitrogen (TN), and phosphorus (TP). These elements, together with the soil organic matter (SOM) accumulated in the BSC layer and in the sediment underneath (crust sediment CS), leading to initial soil development. The more disturbed BSC (BSC1) exhibited lower algal and microbial biomass and lower C algal /C mic ratios than the undisturbed BSC (BSC2). The BSC1 accumulated more organic carbon (OC) than BSC2. However, the OC in the BSC2 was more effectively incorporated into C mic than in the BSC1, as indicated by lower OC:C mic ratios. The AcidPA (1.1-1.3 μmol g -1  DM h -1 or 147-178 μg g -1  DM h -1 ) and AlkPA (2.7-5.5 μmol g -1  DM h -1 or 372-764 μg g -1  DM h -1 ) were low in both BSCs. The PA, together with the elemental stoichiometry, indicated no P limitation of both BSCs but rather water limitation followed by N limitation for the algae community and a carbon limitation for the microbial community. Our results explain the observed distribution of early successional and more developed BSCs on the sand dune.

Evaluation of behaviour of Lachancea thermotolerans biocontrol agents on grape fermentations.

PubMed

Nally, M C; Ponsone, M L; Pesce, V M; Toro, M E; Vazquez, F; Chulze, S

2018-07-01

Previous researches have showed that Lachancea thermotolerans strains RCKT4 and RCKT5 inhibited the growth of Aspergillus. However, currently, there are no data on their nutritional preferences, as a possible substrate competitor against Saccharomyces cerevisiae, and their effects on fermentation. In this work, we observed that the biocontrol yeasts and S. cerevisiae BSc203, based on the utilization of 16 carbonate sources, revealed significant differences in the nutritional profile (biocontrol yeasts NS:0·25, BSc203 NS:0·56). Lachancea thermotolerans strains did not occupy the same niche as that of BSc203 (NOI:0·44). The biocontrol agents and BSc203 presented similar competitive attitude in terms of the sugar, ethanol and sulphite tolerances. During fermentation, the biocontrol yeasts were found to tolerate up to 12% v/v ethanol, 250 mg ml -1 of total SO 2 and 30° Brix sugar. In mixed cultures, L. thermotolerans strains did not negatively affect the growth of BSc203 and the wine quality, except when RCKT4 was initially inoculated at a high proportion in the mixed culture 1MSK4 (1%BSc203/99%RCKT4), resulting in a lower production of CO 2 and ethanol, in comparison with pure BSc203. RCKT5, at a high proportion, in 1MSK5 (1%BSc203/99%RCKT5) presented promising oenological properties. This fermentation showed lower acetic acid contents and higher total acidity than pure BSc203. Generally it is not evaluated if the biofungicide yeasts sprayed on vegetables alter the quality of the fermented products. This work focused on the importance of assessing the possible effects of yeast-based fungicides used in vineyards on grape fermentation, especially on Saccharomyces cerevisiae growth. In this context, the competition between biofungicide yeasts and S. cerevisiae under winemaking conditions is investigated. © 2018 The Society for Applied Microbiology.

Detection and Evaluation of Early Breast Cancer via Magnetic Resonance Imaging: Studies of Mouse Models and Clinical Implementation

DTIC Science & Technology

2007-03-01

Krausz 3 M.D., Marta Zamora1 B.Sc., Erica Markewicz1 B.Sc., Sean Foxley1 M.Sc., Xiaobing Fan1 Ph.D., Dianna Pang2 B.Sc., Brad Williams2 B.Sc., So...of prostate tumors in mice. NMR Biomed 2005; 18:285-292. 28. Szabo BK, Aspelin P, Wiberg MK, Bone B. Dynamic MR imaging of the breast. Analysis of...enhancement (E1, Epeak) and time to peak enhancement (Tpeak) were measured for each curve as performed by Szabo et al (24). The signal enhancement

Germination, survival and growth of three vascular plants on biological soil crusts from a Mexican tropical desert.

PubMed

Godínez-Alvarez, H; Morín, C; Rivera-Aguilar, V

2012-01-01

Information about the effects of biological soil crusts (BSC) on germination, seedling survival and growth of vascular plants is controversial because they can have positive, neutral or negative effects. This controversy may be because most studies conducted until now have just analysed one or two recruitment stages independently. To understand the BSC effects on vascular plants, it is necessary to consider each stage of the recruitment process and synthesise all this information. The goal of this study was twofold. First, we analyse germination, seedling survival and growth of three vascular plants (Agave marmorata, Prosopis laevigata and Neobuxbaumia tetetzo) on BSC (cyanobacteria and mixed crust) from a tropical desert region of south-central México. Second, we synthesise the information to determine the total effect of BSC on plant species performance. We conducted experiments under controlled conditions to evaluate the proportion of germinated seeds, proportion of surviving seedlings and seedling dry weight in BSC and bare soil. Results showed that BSC have different effects on germination, seedling survival and growth of plant species. Plant species performance was qualitatively higher on BSC than bare soil. The highest performance of A. marmorata and P. laevigata was observed on cyanobacteria and mixed crusts, respectively. The highest performance of N. tetetzo was on both crust types. © 2011 German Botanical Society and The Royal Botanical Society of the Netherlands.

Cloning and characterization of a novel sigma-like glutathione S-transferase from the giant panda parasitic nematode, Baylisascaris schroederi.

PubMed

Xie, Yue; Zhou, Xuan; Chen, Lin; Zhang, Zhihe; Wang, Chengdong; Gu, Xiaobin; Wang, Tao; Peng, Xuerong; Yang, Guangyou

2015-01-23

Baylisascaris schroederi, an intestinal nematode of the giant panda, is the cause of the often fatal disease, baylisascariasis. Glutathione S-transferases (GSTs) are versatile enzymes that can affect parasite survival and parasite-host interactions and, are therefore, potential targets for the development of diagnostic tests and vaccines. In this study, we identified a full-length cDNA that encoded a novel, secretory sigma-like GST (Bsc-GSTσ) from a B. schroederi-omic dataset. Following cloning and sequencing, sequence and structural analyses and comparative modeling were performed using online-bioinformatics and proteomics tools. The recombinant Bsc-GSTσ (rBsc-GSTσ) protein was prokaryotically expressed and then used to detect antigenicity and reactivity using immunoblotting assays. In addition, the native protein in female adult B. schroederi was located via immunofluorescence techniques, while the preliminary ELISA-based serodiagnostic potential of rBsc-GSTσ was assessed in native and infected mouse sera. Bsc-GSTσ contained a 621-bp open reading frame that encoded a polypeptide of 206 amino acids with two typical sigma GST domain profiles, including a GST_N_Sigma_like at the N-terminus and a GST_C_Sigma_like at the C-terminus. The presence of an N-terminal signal sequence indicated that Bsc-GSTσ was a secretory protein. Sequence alignment and phylogenetic analyses showed that Bsc-GSTσ was a nematode-specific member of the Sigma class GSTs and shared the closest genetic distance with its homologue in Ascaris suum. Further comparative structure analyses indicated that Bsc-GSTσ possessed the essential structural motifs (e.g., βαβαββα) and the consensus secondary or tertiary structure that is typical for other characterized GSTσs. Immunolocalization revealed strong distributions of native Bsc-GSTσ in the body hypodermis, lateral chords, gut epithelium, gut microvilli, oviduct epithelium, and ovaries of adult female worms, similar to its homologue in A. suum. Building on good immunogenic properties, rBsc-GSTσ-based ELISA exhibited a sensitivity of 79.1% and a specificity of 82.0% to detect anti-B. schroederi IgG antibodies in the sera of experimentally infected mice. This study presents a comprehensive demonstration of sequence and structural-based analysis of a new, secretory sigma-like GST from a nematode, and its good serodiagnostic performance suggests that rBsc-GSTσ has the potential to detect B. schroederi and, therefore, could be used to develop an ELISA-based serological test to diagnose baylisascariasis in giant pandas.

Feasibility and Acceptability of a Best Supportive Care Checklist among Clinicians.

PubMed

Boucher, Nathan A; Nicolla, Jonathan; Ogunseitan, Adeboye; Kessler, Elizabeth R; Ritchie, Christine S; Zafar, Yousuf Y

2018-04-23

Best supportive care (BSC) is often not standardized across sites, consistent with best evidence, or sufficiently described. We developed a consensus-based checklist to document BSC delivery, including symptom management, decision making, and care planning. We hypothesized that BSC can be feasibly documented with this checklist consistent with consolidated standards of reporting trials. To determine feasibility/acceptability of a BSC checklist among clinicians. To test feasibility of a BSC checklist in standard care, we enrolled a sample of clinicians treating patients with advanced cancer at four centers. Clinicians were asked to complete the checklist at eligible patient encounters. We surveyed enrollees regarding checklist use generating descriptive statistics and frequencies. We surveyed 15 clinicians and 9 advanced practice providers. Mean age was 41 (SD = 7.9). Mean years since fellowship for physicians was 7.2 (SD = 4.5). Represented specialties are medical oncology (n = 8), gynecologic oncology (n = 4), palliative care (n = 2), and other (n = 1). For "overall impact on your delivery of supportive/palliative care," 40% noted improved impact with using BSC. For "overall impact on your documentation of supportive/palliative care," 46% noted improvement. Impact on "frequency of comprehensive symptom assessment" was noted to be "increased" by 33% of providers. None noted decreased frequency or worsening impact on any measure with use of BSC. Regarding feasibility of integrating the checklist into workflow, 73% agreed/strongly agreed that checklists could be easily integrated, 73% saw value in integration, and 80% found it easy to use. Clinicians viewed the BSC checklist favorably illustrating proof of concept, minor workflow impact, and potential of benefit to patients.

Costo Efectividad del Tratamiento de Tumores Neuroendócrinos Pancreáticos Avanzados no Operables con Sunitinib en México.

PubMed

Muciño Ortega, Emilio; Chi-Chan, Alfredo; Peniche-Otero, Gustavo; Gutiérrez-Colín, Consuelo I; Herrera-Rojas, Joaquín; Galindo-Suárez, Rosa María

2012-12-01

Sunitinib had showed a substantial clinical benefit in patients with non-resectable pancreatic Neuroendocrine Tumors (NET). The objective of this study was to estimate the cost-effectiveness of sunitinib in the treatment of non-resectable pancreatic NET, from the perspective of the Social Security Mexican Institute (IMSS). A Markov model (2-week cycles) was used to estimate the health and economic consequences of sunitinib 37.5mg/day+best supportive care (BSC) regarding placebo+BSC (ten-years horizon, discount rate: 5%). Effectiveness measures were: overall survival (OS), progression-free survival (PFS) and quality adjusted life years (QALY). Resource utilization (BSC, adverse events management, medical follow-up) was estimated through a survey with Mexican oncologists (n=10). Unit costs of medication and medical resources were obtained from institutional sources. Sensitivity analyses were performed and acceptability curves were constructed. Sunitinib+BSC gained 0.49 years (PFS), 1.18 years (OS) and 0.70 QALY against placebo+BSC. Sunitinib+BSC increased medical direct costs (2011 US$) per patient in $20,854, which was driven by acquisition costs of sunitinib and medical follow up before progression. ICER's were $42,157, $17,662 and $29,808 per progression-free year, life-year and QALY gained, respectively, which remained robust through±25% changes in main parameters. At willingness to pay higher than $40,000, $22,400 and $37,600 sunitinib+BSC becomes the most cost-effective alternative in regards to PFS, OS and QALYs, respectively. At IMSS, sunitinib+BSC would provide substantial clinical benefits to patients suffering unresectable pancreatic NET, although the latter would increase medical costs of treatment and clinical follow up. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Modified slanted-edge method for camera modulation transfer function measurement using nonuniform fast Fourier transform technique

NASA Astrophysics Data System (ADS)

Duan, Yaxuan; Xu, Songbo; Yuan, Suochao; Chen, Yongquan; Li, Hongguang; Da, Zhengshang; Gao, Limin

2018-01-01

ISO 12233 slanted-edge method experiences errors using fast Fourier transform (FFT) in the camera modulation transfer function (MTF) measurement due to tilt angle errors in the knife-edge resulting in nonuniform sampling of the edge spread function (ESF). In order to resolve this problem, a modified slanted-edge method using nonuniform fast Fourier transform (NUFFT) for camera MTF measurement is proposed. Theoretical simulations for images with noise at a different nonuniform sampling rate of ESF are performed using the proposed modified slanted-edge method. It is shown that the proposed method successfully eliminates the error due to the nonuniform sampling of the ESF. An experimental setup for camera MTF measurement is established to verify the accuracy of the proposed method. The experiment results show that under different nonuniform sampling rates of ESF, the proposed modified slanted-edge method has improved accuracy for the camera MTF measurement compared to the ISO 12233 slanted-edge method.

Balanced Scorecards As a Tool for Developing Patient-Centered Pharmacy Services

PubMed Central

Enwere, Emmanuel N.; Keating, Ellen A.; Weber, Robert J.

2014-01-01

Having accurate data is essential for the pharmacy director to manage the department and develop patient-centered pharmacy services. A balanced scorecard (BSC) of essential department data, which is a broad view of a department’s function beyond its financial performance, is an important part of any department’s strategic plan. This column describes how the pharmacy director builds and promotes a department’s BSC. Specifically, this article reviews how the BSC supports the department’s mission and vision, describes the metrics of the BSC and how they are collected, and recommends how the pharmacy director can effectively use the scorecard results in promoting the pharmacy. If designed properly and updated consistently, a BSC can present a broad view of the pharmacy’s performance, serve as a guide for strategic decision making, and improve on the quality of its services. PMID:24958976

The potential of LIRIC to validate the vertical profiles of the aerosol mass concentration estimated by an air quality model

NASA Astrophysics Data System (ADS)

Siomos, Nikolaos; Filoglou, Maria; Poupkou, Anastasia; Liora, Natalia; Dimopoulos, Spyros; Melas, Dimitris; Chaikovsky, Anatoli; Balis, Dimitris

2015-04-01

Vertical profiles of the aerosol mass concentration derived by a retrieval algorithm that uses combined sunphotometer and LIDAR data (LIRIC) were used in order to validate the mass concentration profiles estimated by the air quality model CAMx. LIDAR and CIMEL measurements of the Laboratory of Atmospheric Physics of the Aristotle University of Thessaloniki were used for this validation.The aerosol mass concentration profiles of the fine and coarse mode derived by CAMx were compared with the respective profiles derived by the retrieval algorithm. For the coarse mode particles, forecasts of the Saharan dust transportation model BSC-DREAM8bV2 were also taken into account. Each of the retrieval algorithm's profiles were matched to the models' profile with the best agreement within a time window of four hours before and after the central measurement. OPAC, a software than can provide optical properties of aerosol mixtures, was also employed in order to calculate the angstrom exponent and the lidar ratio values for 355nm and 532nm for each of the model's profiles aiming in a comparison with the angstrom exponent and the lidar ratio values derived by the retrieval algorithm for each measurement. The comparisons between the fine mode aerosol concentration profiles resulted in a good agreement between CAMx and the retrieval algorithm, with the vertical mean bias error never exceeding 7 μgr/m3. Concerning the aerosol coarse mode concentration profiles both CAMx and BSC-DREAM8bV2 values are severely underestimated, although, in cases of Saharan dust transportation events there is an agreement between the profiles of BSC-DREAM8bV2 model and the retrieval algorithm.

78 FR 40744 - Request for Nominations of Candidates To Serve on the Board of Scientific Counselors (BSC...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-08

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Request for Nominations of Candidates To Serve on the Board of Scientific Counselors (BSC), Office of Infectious Diseases (OID) The Centers for Disease Control and Prevention (CDC) is soliciting nominations for possible membership on the BSC, OID. This board...

A management approach that drives actions strategically: balanced scorecard in a mental health trust case study.

PubMed

Schmidt, Stefan; Bateman, Ian; Breinlinger-O'Reilly, Jochen; Smith, Peter

2006-01-01

Achieving excellence is a current preoccupation in U.K. public health organisations. This article aims to use a case study to explain how a mental health trust delivers excellent performance using a balanced scorecard (BSC) management approach. Reports a project to implement a BSC approach in the South West Yorkshire Mental Health NHS Trust to achieve its "excellence" objectives. The authors were participants in the project. The design of the pilot project was informed theoretically by the work of Kaplan and Norton and practically by in-house discussions on a strategy to achieve excellence. Explains the process of building a BSC strategy step-by-step. Discusses how the vision and strategies of a mental health trust can be translated into tangible measures, which are the basis for actions that are driven strategically. There are many possibilities for a BSC management approach and this case study is specific to mental health trusts in the UK, although it is believed that the case has a universally applicable modus operandi. This article will help healthcare managers to evaluate the benefits of a BSC management approach. This article explains how actions can be structured in connection with a BSC management approach.

Adaptive control system for pulsed megawatt klystrons

DOEpatents

Bolie, Victor W.

1992-01-01

The invention provides an arrangement for reducing waveform errors such as errors in phase or amplitude in output pulses produced by pulsed power output devices such as klystrons by generating an error voltage representing the extent of error still present in the trailing edge of the previous output pulse, using the error voltage to provide a stored control voltage, and applying the stored control voltage to the pulsed power output device to limit the extent of error in the leading edge of the next output pulse.

Alignment of University Information Technology Resources with the Malcolm Baldrige Results Criteria for Performance Excellence in Education: A Balanced Scorecard Approach

ERIC Educational Resources Information Center

Beard, Deborah F.; Humphrey, Roberta L.

2014-01-01

The authors suggest using a balanced scorecard (BSC) approach to evaluate information technology (IT) resources in higher education institutions. The BSC approach illustrated is based on the performance criteria of the Malcolm Baldrige National Quality Award in Education. This article suggests areas of potential impact of IT on BSC measures in…

Developing and using a balanced scorecard: a case study with SWOT analysis.

PubMed

Gumbus, Andra; Lussier, Robert N

2003-01-01

Have you tried to measure your laboratory's performance lately? Do you measure and assess financial results, customer satisfaction, internal process efficiency, and learning and growth? If any of these metrics are missing from your performance measurement system, you are not using the latest management tool that is sweeping the health-care industry--the balanced scorecard (BSC). This article begins with a discussion of the BSC and why you should use it in your laboratory, followed by SWOT analysis to assess the strengths, weaknesses, opportunities, and threats (SWOT) a BSC offers your laboratory. A laboratory case study is then presented to assist you in developing and using a BSC in your laboratory.

News from the Biological Stain Commission.

PubMed

Lyon, H O; Kiernan, J A

2008-12-01

In the three earlier editions of News from the Biological Stain Commission (BSC), under the heading of "Regulatory affairs," the BSC's International Affairs Committee reported on the work of Technical Committee 212, Clinical Laboratory Testing and in Vitro Diagnostic Test Systems of the International Standards Organization (ISO/TC 212) and its working groups, WG 1, WG 2 and WG 3. In this issue of News from the BSC, H.O. Lyon provides information from the annual meeting of ISO/TC 212 that took place June 2-4, 2008 in Vancouver, British Columbia, Canada. In addition, under the heading of "Certification," J.A. Kiernan examines the certification procedure for thionine used by the BSC laboratory in Rochester, NY.

An Examination of Interprofessional Team Functioning in a BScN Blended Learning Program: Implications for Accessible Distance-Based Nursing Education Programs

ERIC Educational Resources Information Center

Carter, Lorraine Mary; Beattie, Bev; Caswell, Wenda; Fitzgerald, Scott; Nowrouzi, Behdin

2016-01-01

In this study, the perceptions and experiences of an interprofessional team responsible for the development and delivery of the Registered Practical Nurse (RPN) to Bachelor of Science in Nursing (BScN) Blended Learning Program at Nipissing University were examined. In this program, RPNs can acquire a BScN through distance-based part-time study,…

Modification of gray iron produced by induction melting with barium strontium

NASA Astrophysics Data System (ADS)

Modzelevskaya, G.; Feoktistov, A. V.; Selyanin, I. F.; Kutsenko, A. I.; Kutsenko, A. A.

2016-09-01

The article provides analysis of results of gray iron experimental melts in induction furnace and the following melt modification with barium-strontium carbonate (BSC-2). It is shown that modification positively affects mechanical and casting properties and as-cast iron structure. It was established that BSC-2 granulated immediately prior to use has greater impact on melt than BSC-2 of the same faction, supplied by the manufacturer.

Ramucirumab for Treating Advanced Gastric Cancer or Gastro-Oesophageal Junction Adenocarcinoma Previously Treated with Chemotherapy: An Evidence Review Group Perspective of a NICE Single Technology Appraisal.

PubMed

Büyükkaramikli, Nasuh C; Blommestein, Hedwig M; Riemsma, Rob; Armstrong, Nigel; Clay, Fiona J; Ross, Janine; Worthy, Gill; Severens, Johan; Kleijnen, Jos; Al, Maiwenn J

2017-12-01

The National Institute for Health and Care Excellence (NICE) invited the company that manufactures ramucirumab (Cyramza ® , Eli Lilly and Company) to submit evidence of the clinical and cost effectiveness of the drug administered alone (monotherapy) or with paclitaxel (combination therapy) for treating adults with advanced gastric cancer or gastro-oesophageal junction (GC/GOJ) adenocarcinoma that were previously treated with chemotherapy, as part of the Institute's single technology appraisal (STA) process. Kleijnen Systematic Reviews Ltd (KSR), in collaboration with Erasmus University Rotterdam, was commissioned to act as the Evidence Review Group (ERG). This paper describes the company's submission, the ERG review, and NICE's subsequent decisions. Clinical effectiveness evidence for ramucirumab monotherapy (RAM), compared with best supportive care (BSC), was based on data from the REGARD trial. Clinical effectiveness evidence for ramucirumab combination therapy (RAM + PAC), compared with paclitaxel monotherapy (PAC), was based on data from the RAINBOW trial. In addition, the company undertook a network meta-analysis (NMA) to compare RAM + PAC with BSC and docetaxel. Cost-effectiveness evidence of monotherapy and combination therapy relied on partitioned survival, cost-utility models. The base-case incremental cost-effectiveness ratio (ICER) of the company was £188,640 (vs BSC) per quality-adjusted life-year (QALY) gained for monotherapy and £118,209 (vs BSC) per QALY gained for combination therapy. The ERG assessment indicated that the modelling structure represented the course of the disease; however, a few errors were identified and some of the input parameters were challenged. The ERG provided a new base case, with ICERs (vs BSC) of £188,100 (monotherapy) per QALY gained and £129,400 (combination therapy) per QALY gained and conducted additional exploratory analyses. The NICE Appraisal Committee (AC), considered the company's decision problem was in line with the NICE scope, with the exception of the choice of comparators for the combination therapy model. The most plausible ICER for ramucirumab monotherapy compared with BSC was £188,100 per QALY gained. The Committee considered that the ERG's exploratory analysis in which RAM + PAC was compared with PAC by using the direct head-to-head data (including utilities) from the RAINBOW trial, provided the most plausible ICER (i.e. £408,200 per QALY gained) for ramucirumab combination therapy. The Committee concluded that end-of-life considerations cannot be applied for either case, since neither failed to offer an extension to life of at least 3 months. The company did not submit a patient access scheme (PAS). After consideration of the evidence, the Committee concluded that ramucirumab alone or with paclitaxel could not be considered a cost-effective use of National Health Service resources for treating advanced GC/GOJ patients that were previously treated with chemotherapy, and therefore its use could not be recommended. We might wonder if a complete STA process is necessary for treatments without a PAS, which are, according to the company's submission, already associated with ICERs far above the currently accepted threshold in all (base-case, sensitivity and scenario) analyses.

A novel binary shape context for 3D local surface description

NASA Astrophysics Data System (ADS)

Dong, Zhen; Yang, Bisheng; Liu, Yuan; Liang, Fuxun; Li, Bijun; Zang, Yufu

2017-08-01

3D local surface description is now at the core of many computer vision technologies, such as 3D object recognition, intelligent driving, and 3D model reconstruction. However, most of the existing 3D feature descriptors still suffer from low descriptiveness, weak robustness, and inefficiency in both time and memory. To overcome these challenges, this paper presents a robust and descriptive 3D Binary Shape Context (BSC) descriptor with high efficiency in both time and memory. First, a novel BSC descriptor is generated for 3D local surface description, and the performance of the BSC descriptor under different settings of its parameters is analyzed. Next, the descriptiveness, robustness, and efficiency in both time and memory of the BSC descriptor are evaluated and compared to those of several state-of-the-art 3D feature descriptors. Finally, the performance of the BSC descriptor for 3D object recognition is also evaluated on a number of popular benchmark datasets, and an urban-scene dataset is collected by a terrestrial laser scanner system. Comprehensive experiments demonstrate that the proposed BSC descriptor obtained high descriptiveness, strong robustness, and high efficiency in both time and memory and achieved high recognition rates of 94.8%, 94.1% and 82.1% on the considered UWA, Queen, and WHU datasets, respectively.

Cost-effectiveness of maintenance pemetrexed in patients with advanced nonsquamous-cell lung cancer from the perspective of the Swiss health care system.

PubMed

Matter-Walstra, Klazien; Joerger, Markus; Kühnel, Ursula; Szucs, Thomas; Pestalozzi, Bernhard; Schwenkglenks, Matthias

2012-01-01

A recent randomized study showed switch maintenance with pemetrexed after nonpemetrexed-containing first-line chemotherapy in patients with advanced nonsmall-cell lung cancer to prolong overall survival by 2.8 months. We examined the cost-effectiveness of pemetrexed in this indication, from the perspective of the Swiss health care system, and assessed the influence of the costs of best supportive care (BSC) on overall cost-effectiveness. A Markov model was constructed based on the pemetrexed maintenance study, and the incremental cost-effectiveness ratio (ICER) of adding pemetrexed until disease progression was calculated as cost per quality-adjusted life-year gained. Uncertainties concerning the costs of BSC on the ICER were addressed. The base case ICER for maintenance therapy with pemetrexed plus BSC compared to BSC alone was €106,202 per quality-adjusted life-year gained. Varying the costs for BSC had a marked effect. Assuming a reduction of the costs for BSC by 25% in the pemetrexed arm resulted in an ICER of €47,531 per quality-adjusted life-year, which is below predefined criteria for cost effectiveness in Switzerland. Switch maintenance with pemetrexed in patients with advanced nonsquamous-cell lung cancer after standard first-line chemotherapy is not cost-effective. Uncertainties on the resource use and costs for BSC have a large influence on the cost-effectiveness calculation and should be reported in more detail. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Validation of cross-contamination control in biological safety cabinet for biotech/pharmaceutical manufacturing process.

PubMed

Hu, Shih-Cheng; Shiue, Angus; Tu, Jin-Xin; Liu, Han-Yang; Chiu, Rong-Ben

2015-12-01

For class II, type A2 biological safety cabinets (BSC), NSF/ANSI Standard 49 should be conformed in cabinet airflow velocity derivation, particle contamination, and aerodynamic flow properties. However, there exists a potential problem. It has been built that the cabinet air flow stabilize is influenced by the quantity of downflow of air and the height above the cabinet exhaust opening. Three air downflow quantities were compared as an operating apparatus was placed from 20 to 40 cm above the bench of the cabinet. The results show that the BSC air downflow velocity is a function of increased sampling height, displaying that containment is improvingly permitted over product protection as the sampling height decreases. This study investigated the concentration gradient of particles at various heights and downflow air quantity from the bench of the BSC. Experiment results indicate that performance near the bench was better than in the rest of the BSC. In terms of height, the best cleanliness was measured at a height of 10 cm over the bench; it reduced actually with add in height. The empirical curves accommodate, founded on the concentration gradient of particle created was elaborated for evaluating the particle concentration at different heights and downflow air quantity from the source of the bench of the BSC. The particle image velocimetry system applied for BSC airflow research to fix amount of airflow patterns and air distribution measurement and results of measurements show how obstructions can greatly influence the airflow and contaminant transportation in a BSC.

[Balanced scorecard in health].

PubMed

Leyton-Pavez, Carolina Elena; Huerta-Riveros, Patricia Carolina; Paúl-Espinoza, Iván Renato

2015-01-01

To evaluate the installation of strategies in the higher complexity hospitals (HMC, in Spanish) of public health in Chile starting from the results of the Balanced Scorecard (BSC), during the years 2011-2012. The implementation of the BSC is described, the strategies and indicators identified, and the results of the 57 HMC compared and analyzed. Starting from the comparison of the results it is discovered that the BSC allows to evaluate the installation of the strategies. Differences are identified in the installation of the strategies by geographical area, with North presenting a higher score (20.21), followed by Center (10.41) and South (19.50), which can be explained by the size and complexity of this establishments, variables that should be incorporated in the evaluation of the results of the BSC.

[Definition of the specificity of DNA-methyltransferase M.Bsc4I in cell lysate by blocking of restriction endonucleases and computer modeling].

PubMed

Dedkov, V S

2009-01-01

The specificity of DNA-methyltransferase M.Bsc4I was defined in cellular lysate of Bacillus schlegelii 4. For this purpose, we used methylation sensitivity of restriction endonucleases, and also modeling of methylation. The modeling consisted in editing sequences of DNA using replacements of methylated bases and their complementary bases. The substratum DNA processed by M.Bsc4I also were used for studying sensitivity of some restriction endonucleases to methylation. Thus, it was shown that M.Bsc4I methylated 5'-Cm4CNNNNNNNGG-3' and the overlapped dcm-methylation blocked its activity. The offered approach can appear universal enough and simple for definition of specificity of DNA-methyltransferases.

Spatial heterogeneity of type I error for local cluster detection tests

PubMed Central

2014-01-01

Background Just as power, type I error of cluster detection tests (CDTs) should be spatially assessed. Indeed, CDTs’ type I error and power have both a spatial component as CDTs both detect and locate clusters. In the case of type I error, the spatial distribution of wrongly detected clusters (WDCs) can be particularly affected by edge effect. This simulation study aims to describe the spatial distribution of WDCs and to confirm and quantify the presence of edge effect. Methods A simulation of 40 000 datasets has been performed under the null hypothesis of risk homogeneity. The simulation design used realistic parameters from survey data on birth defects, and in particular, two baseline risks. The simulated datasets were analyzed using the Kulldorff’s spatial scan as a commonly used test whose behavior is otherwise well known. To describe the spatial distribution of type I error, we defined the participation rate for each spatial unit of the region. We used this indicator in a new statistical test proposed to confirm, as well as quantify, the edge effect. Results The predefined type I error of 5% was respected for both baseline risks. Results showed strong edge effect in participation rates, with a descending gradient from center to edge, and WDCs more often centrally situated. Conclusions In routine analysis of real data, clusters on the edge of the region should be carefully considered as they rarely occur when there is no cluster. Further work is needed to combine results from power studies with this work in order to optimize CDTs performance. PMID:24885343

Quantitative Ultrasound Comparison of MAT and 4T1 Mammary Tumors in Mice and Rats Across Multiple Imaging Systems.

PubMed

Wirtzfeld, Lauren A; Ghoshal, Goutam; Rosado-Mendez, Ivan M; Nam, Kibo; Park, Yeonjoo; Pawlicki, Alexander D; Miller, Rita J; Simpson, Douglas G; Zagzebski, James A; Oelze, Michael L; Hall, Timothy J; O'Brien, William D

2015-08-01

Quantitative ultrasound estimates such as the frequency-dependent backscatter coefficient (BSC) have the potential to enhance noninvasive tissue characterization and to identify tumors better than traditional B-mode imaging. Thus, investigating system independence of BSC estimates from multiple imaging platforms is important for assessing their capabilities to detect tissue differences. Mouse and rat mammary tumor models, 4T1 and MAT, respectively, were used in a comparative experiment using 3 imaging systems (Siemens, Ultrasonix, and VisualSonics) with 5 different transducers covering a range of ultrasonic frequencies. Functional analysis of variance of the MAT and 4T1 BSC-versus-frequency curves revealed statistically significant differences between the two tumor types. Variations also were found among results from different transducers, attributable to frequency range effects. At 3 to 8 MHz, tumor BSC functions using different systems showed no differences between tumor type, but at 10 to 20 MHz, there were differences between 4T1 and MAT tumors. Fitting an average spline model to the combined BSC estimates (3-22 MHz) demonstrated that the BSC differences between tumors increased with increasing frequency, with the greatest separation above 15 MHz. Confining the analysis to larger tumors resulted in better discrimination over a wider bandwidth. Confining the comparison to higher ultrasonic frequencies or larger tumor sizes allowed for separation of BSC-versus-frequency curves from 4T1 and MAT tumors. These constraints ensure that a greater fraction of the backscattered signals originated from within the tumor, thus demonstrating that statistically significant tumor differences were detected. © 2015 by the American Institute of Ultrasound in Medicine.

Inclusive blue swimming crab fishery management initiative in Betahwalang Demak, Indonesia

NASA Astrophysics Data System (ADS)

Ghofar, A.; Redjeki, S.; Madduppa, H.; Abbey, M.; Tasunar, N.

2018-02-01

There has been a growing interest in the sustainability of the blue swimming crab (Portunus pelagicus, BSC) fisheries in Indonesia. The fishery is operated on a small-scale basis and yet it significantly contributes to the Indonesia’s fisheries as the third biggest export commodities following tuna and shrimp. The project inclusively (i) brings together coastal and fishing communities, university, the private sector, government at various levels and international agencies, (ii) bottom up approach is integrated with top-down (government policy) approach and (iii) integration o f conservation into fisheries management. This approach resulted in better understanding and participation among the coastal fishing communities on sustainable fisheries and the necessity to perform fisheries management. This led to the establishment of BSC fishery management body (legally support by Village Regulation - No.06/2013 on BSC fishery management in 2013, followed by a District Regulation No.523/0166/2014 on BSC fishery management in 2014. More recently, the Governor of Central Java issued a Governor Regulation No. 33/2017 on Crab and Lobster fisheries management and a Governor Decree No. 523/93/2017 on the establishment of the BSC fisheries management committee in Central Java. Further impacts have been raised awareness in sustainable BSC fishery management in surrounding districts in other provinces, namely East Java and Southeast Sulawesi. There remains, further needs to strengthen fishery governance by means of integrating national and local government effort in sustaining the fisheries, including the Issuance and effective implementation of the provincial decree on BSC fishery management for Central Java, that will enable the use of province’s resource to implement fisheries management and strengthen law enforcement. To help improve the stock, a plan for stock enhancement should also be developed with proper monitoring program and community commitment to avoid “put and take” practices.

Diel hysteresis between soil respiration and soil temperature in a biological soil crust covered desert ecosystem

PubMed Central

Li, Xinrong; Zhang, Peng; Chen, Yongle

2018-01-01

Soil respiration induced by biological soil crusts (BSCs) is an important process in the carbon (C) cycle in arid and semi-arid ecosystems, where vascular plants are restricted by the harsh environment, particularly the limited soil moisture. However, the interaction between temperature and soil respiration remains uncertain because of the number of factors that control soil respiration, including temperature and soil moisture, especially in BSC-dominated areas. In this study, the soil respiration in moss-dominated crusts and lichen-dominated crusts was continuously measured using an automated soil respiration system over a one-year period from November 2015 to October 2016 in the Shapotou region of the Tengger Desert, northern China. The results indicated that over daily cycles, the half-hourly soil respiration rates in both types of BSC-covered areas were commonly related to the soil temperature. The observed diel hysteresis between the half-hourly soil respiration rates and soil temperature in the BSC-covered areas was limited by nonlinearity loops with semielliptical shapes, and soil temperature often peaked later than the half-hourly soil respiration rates in the BSC-covered areas. The average lag times between the half-hourly soil respiration rates and soil temperature for both types of BSC-covered areas were two hours over the diel cycles, and they were negatively and linearly related to the volumetric soil water content. Our results highlight the diel hysteresis phenomenon that occurs between soil respiration rates and soil temperatures in BSC-covered areas and the negative response of this phenomenon to soil moisture, which may influence total C budget evaluations. Therefore, the interactive effects of soil temperature and moisture on soil respiration in BSC-covered areas should be considered in global carbon cycle models of desert ecosystems. PMID:29624606

Microbial Community and Biochemical Dynamics of Biological Soil Crusts across a Gradient of Surface Coverage in the Central Mojave Desert.

PubMed

Mogul, Rakesh; Vaishampayan, Parag; Bashir, Mina; McKay, Chris P; Schubert, Keith; Bornaccorsi, Rosalba; Gomez, Ernesto; Tharayil, Sneha; Payton, Geoffrey; Capra, Juliana; Andaya, Jessica; Bacon, Leonard; Bargoma, Emily; Black, David; Boos, Katie; Brant, Michaela; Chabot, Michael; Chau, Danny; Cisneros, Jessica; Chu, Geoff; Curnutt, Jane; DiMizio, Jessica; Engelbrecht, Christian; Gott, Caroline; Harnoto, Raechel; Hovanesian, Ruben; Johnson, Shane; Lavergne, Britne; Martinez, Gabriel; Mans, Paul; Morales, Ernesto; Oei, Alex; Peplow, Gary; Piaget, Ryan; Ponce, Nicole; Renteria, Eduardo; Rodriguez, Veronica; Rodriguez, Joseph; Santander, Monica; Sarmiento, Khamille; Scheppelmann, Allison; Schroter, Gavin; Sexton, Devan; Stephenson, Jenin; Symer, Kristin; Russo-Tait, Tatiane; Weigel, Bill; Wilhelm, Mary B

2017-01-01

In this study, we expand upon the biogeography of biological soil crusts (BSCs) and provide molecular insights into the microbial community and biochemical dynamics along the vertical BSC column structure, and across a transect of increasing BSC surface coverage in the central Mojave Desert, CA, United States. Next generation sequencing reveals a bacterial community profile that is distinct among BSCs in the southwestern United States. Distribution of major phyla in the BSC topsoils included Cyanobacteria (33 ± 8%), Proteobacteria (26 ± 6%), and Chloroflexi (12 ± 4%), with Phormidium being the numerically dominant genus. Furthermore, BSC subsurfaces contained Proteobacteria (23 ± 5%), Actinobacteria (20 ± 5%), and Chloroflexi (18 ± 3%), with an unidentified genus from Chloroflexi (AKIW781, order) being numerically dominant. Across the transect, changes in distribution at the phylum ( p < 0.0439) and genus ( p < 0.006) levels, including multiple biochemical and geochemical trends ( p < 0.05), positively correlated with increasing BSC surface coverage. This included increases in (a) Chloroflexi abundance, (b) abundance and diversity of Cyanobacteria, (b) OTU-level diversity in the topsoil, (c) OTU-level differentiation between the topsoil and subsurface, (d) intracellular ATP abundances and catalase activities, and (e) enrichments in clay, silt, and varying elements, including S, Mn, Co, As, and Pb, in the BSC topsoils. In sum, these studies suggest that BSCs from regions of differing surface coverage represent early successional stages, which exhibit increasing bacterial diversity, metabolic activities, and capacity to restructure the soil. Further, these trends suggest that BSC successional maturation and colonization across the transect are inhibited by metals/metalloids such as B, Ca, Ti, Mn, Co, Ni, Mo, and Pb.

Microbial Community and Biochemical Dynamics of Biological Soil Crusts across a Gradient of Surface Coverage in the Central Mojave Desert

PubMed Central

Mogul, Rakesh; Vaishampayan, Parag; Bashir, Mina; McKay, Chris P.; Schubert, Keith; Bornaccorsi, Rosalba; Gomez, Ernesto; Tharayil, Sneha; Payton, Geoffrey; Capra, Juliana; Andaya, Jessica; Bacon, Leonard; Bargoma, Emily; Black, David; Boos, Katie; Brant, Michaela; Chabot, Michael; Chau, Danny; Cisneros, Jessica; Chu, Geoff; Curnutt, Jane; DiMizio, Jessica; Engelbrecht, Christian; Gott, Caroline; Harnoto, Raechel; Hovanesian, Ruben; Johnson, Shane; Lavergne, Britne; Martinez, Gabriel; Mans, Paul; Morales, Ernesto; Oei, Alex; Peplow, Gary; Piaget, Ryan; Ponce, Nicole; Renteria, Eduardo; Rodriguez, Veronica; Rodriguez, Joseph; Santander, Monica; Sarmiento, Khamille; Scheppelmann, Allison; Schroter, Gavin; Sexton, Devan; Stephenson, Jenin; Symer, Kristin; Russo-Tait, Tatiane; Weigel, Bill; Wilhelm, Mary B.

2017-01-01

In this study, we expand upon the biogeography of biological soil crusts (BSCs) and provide molecular insights into the microbial community and biochemical dynamics along the vertical BSC column structure, and across a transect of increasing BSC surface coverage in the central Mojave Desert, CA, United States. Next generation sequencing reveals a bacterial community profile that is distinct among BSCs in the southwestern United States. Distribution of major phyla in the BSC topsoils included Cyanobacteria (33 ± 8%), Proteobacteria (26 ± 6%), and Chloroflexi (12 ± 4%), with Phormidium being the numerically dominant genus. Furthermore, BSC subsurfaces contained Proteobacteria (23 ± 5%), Actinobacteria (20 ± 5%), and Chloroflexi (18 ± 3%), with an unidentified genus from Chloroflexi (AKIW781, order) being numerically dominant. Across the transect, changes in distribution at the phylum (p < 0.0439) and genus (p < 0.006) levels, including multiple biochemical and geochemical trends (p < 0.05), positively correlated with increasing BSC surface coverage. This included increases in (a) Chloroflexi abundance, (b) abundance and diversity of Cyanobacteria, (b) OTU-level diversity in the topsoil, (c) OTU-level differentiation between the topsoil and subsurface, (d) intracellular ATP abundances and catalase activities, and (e) enrichments in clay, silt, and varying elements, including S, Mn, Co, As, and Pb, in the BSC topsoils. In sum, these studies suggest that BSCs from regions of differing surface coverage represent early successional stages, which exhibit increasing bacterial diversity, metabolic activities, and capacity to restructure the soil. Further, these trends suggest that BSC successional maturation and colonization across the transect are inhibited by metals/metalloids such as B, Ca, Ti, Mn, Co, Ni, Mo, and Pb. PMID:29109701

Evaluating the Fraser Health Balanced Scorecard--a formative evaluation.

PubMed

Barnardo, Catherine; Jivanni, Amin

2009-01-01

Fraser Health (FH), a large, Canadian, integrated health care network, adopted the Balanced Scorecard (BSC) approach to monitor organizational performance in 2006. This paper reports on the results of a formative evaluation, conducted in April, 2008, to assess the usefulness of the BSC as a performance-reporting system and a performance management tool. Results indicated that the BSC has proven to be useful for reporting performance but is not currently used for performance management in a substantial way.

Isolation and characterization of Klebsiella oxytoca strain degrading crude oil from a Tunisian off-shore oil field.

PubMed

Chamkha, Mohamed; Trabelsi, Yosra; Mnif, Sami; Sayadi, Sami

2011-12-01

A facultatively anaerobic, Gram-negative, mesophilic, moderately halotolerant, non-motile, and non-sporulated bacterium, designated strain BSC5 was isolated from an off-shore "Sercina" oil field, located near the Kerkennah island, Tunisia. Yeast extract was not required for growth. Phenotypic characteristics and phylogenetic analysis of the 16S rRNA gene sequence of strain BSC5 revealed that it was related to members of the genus Klebsiella, being most closely related to the type strain of K. oxytoca (99% sequence similarity). Strain BSC5 was capable of using aerobically the crude oil as substrate growth. The growth of strain BSC5 on crude oil was followed by measuring the OD(600 nm) and by enumeration of viable cells at different culture's time. GC-MS analysis showed that strain BSC5 was capable of degrading a wide range of aliphatic hydrocarbons from C(13) to C(30) . The biodegradation rate for n -alkanes reached 44% and 75%, after 20 and 45 days of incubation, respectively. Addition of the synthetic surfactant, Tween 80, accelerated the crude oil degradation. The biodegradation rate for n -alkanes reached 61% and 98%, after 20 and 45 days of incubation, respectively. Moreover, three aromatic compounds, p -hydroxybenzoate, protocatechuate and gentisate, were metabolized completely by strain BSC5 after 24 h, under aerobic conditions. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The use and design of the BSC in the health care sector: A systematic literature review for Italy, Spain, and Portugal.

PubMed

Gonzalez-Sanchez, Maria Beatriz; Broccardo, Laura; Martins Pires, Amélia Maria

2018-01-01

The aim of this paper is to gain a better understanding of how the balanced scorecard (BSC) has evolved in Spain, Italy, and Portugal. It reviews all the articles on the BSC in the health care sector written between 1992 and 2015 by Spanish, Italian, or Portuguese authors and published in Spanish, Italian, or Portuguese as well as in English. Our study first shows the state of knowledge on BSC in health care for a homogeneous group of Southern European countries. Second, it uncovers the perspectives, indicators, and generation used in the countries under observation to reveal the extent to which this management tool has evolved. Third, it analyses international variations in design and use within the health care context, especially in the United States. Moreover, it also highlights a number of important issues. The BSC is in its early stage of development in these 3 countries, which do not use it as a tool to implement strategy and align all of the elements that help integrate the organization. Copyright © 2017 John Wiley & Sons, Ltd.

Analysis and correction for measurement error of edge sensors caused by deformation of guide flexure applied in the Thirty Meter Telescope SSA.

PubMed

Cao, Haifeng; Zhang, Jingxu; Yang, Fei; An, Qichang; Zhao, Hongchao; Guo, Peng

2018-05-01

The Thirty Meter Telescope (TMT) project will design and build a 30-m-diameter telescope for research in astronomy in visible and infrared wavelengths. The primary mirror of TMT is made up of 492 hexagonal mirror segments under active control. The highly segmented primary mirror will utilize edge sensors to align and stabilize the relative piston, tip, and tilt degrees of segments. The support system assembly (SSA) of the segmented mirror utilizes a guide flexure to decouple the axial support and lateral support, while its deformation will cause measurement error of the edge sensor. We have analyzed the theoretical relationship between the segment movement and the measurement value of the edge sensor. Further, we have proposed an error correction method with a matrix. The correction process and the simulation results of the edge sensor will be described in this paper.

Two-layer critical dimensions and overlay process window characterization and improvement in full-chip computational lithography

NASA Astrophysics Data System (ADS)

Sturtevant, John L.; Liubich, Vlad; Gupta, Rachit

2016-04-01

Edge placement error (EPE) was a term initially introduced to describe the difference between predicted pattern contour edge and the design target for a single design layer. Strictly speaking, this quantity is not directly measurable in the fab. What is of vital importance is the relative edge placement errors between different design layers, and in the era of multipatterning, the different constituent mask sublayers for a single design layer. The critical dimensions (CD) and overlay between two layers can be measured in the fab, and there has always been a strong emphasis on control of overlay between design layers. The progress in this realm has been remarkable, accelerated in part at least by the proliferation of multipatterning, which reduces the available overlay budget by introducing a coupling of overlay and CD errors for the target layer. Computational lithography makes possible the full-chip assessment of two-layer edge to edge distances and two-layer contact overlap area. We will investigate examples of via-metal model-based analysis of CD and overlay errors. We will investigate both single patterning and double patterning. For single patterning, we show the advantage of contour-to-contour simulation over contour to target simulation, and how the addition of aberrations in the optical models can provide a more realistic CD-overlay process window (PW) for edge placement errors. For double patterning, the interaction of 4-layer CD and overlay errors is very complex, but we illustrate that not only can full-chip verification identify potential two-layer hotspots, the optical proximity correction engine can act to mitigate such hotspots and enlarge the joint CD-overlay PW.

Estimating pore and cement volumes in thin section

USGS Publications Warehouse

Halley, R.B.

1978-01-01

Point count estimates of pore, grain and cement volumes from thin sections are inaccurate, often by more than 100 percent, even though they may be surprisingly precise (reproducibility + or - 3 percent). Errors are produced by: 1) inclusion of submicroscopic pore space within solid volume and 2) edge effects caused by grain curvature within a 30-micron thick thin section. Submicroscopic porosity may be measured by various physical tests or may be visually estimated from scanning electron micrographs. Edge error takes the form of an envelope around grains and increases with decreasing grain size and sorting, increasing grain irregularity and tighter grain packing. Cements are greatly involved in edge error because of their position at grain peripheries and their generally small grain size. Edge error is minimized by methods which reduce the thickness of the sample viewed during point counting. Methods which effectively reduce thickness include use of ultra-thin thin sections or acetate peels, point counting in reflected light, or carefully focusing and counting on the upper surface of the thin section.

A study of a nursing department performance measurement system: using the Balanced Scorecard and the Analytic Hierarchy Process.

PubMed

Chu, Hsuan-Lien; Wang, Chen-Chin; Dai, Yu-Tzu

2009-01-01

The health care industry is under pressure from government and private entities as well as from market conditions to contain costs. In an effort to respond to these pressures, the case hospital in this study implemented a Balanced Scorecard (BSC) in January 2003 and integrated it with the hospital's formal incentive plan for non-physicians in January 2005. The nursing department's performance improved in the 2 years following the introduction of the plan. This study contributes to the literature by demonstrating the performance improvement that results from integrating the BSC with an incentive plan in the nursing field. The results provide insight into the current BSC performance metrics applied by the case nursing department, and could be used as guidelines by other health care organizations that wish to implement BSC-based incentive plans.

Modifying the Balanced Scorecard for a Network Industry The Case of the Clearing Industry

NASA Astrophysics Data System (ADS)

Chlistalla, Michael; Schaper, Torsten

The Balanced Scorecard (BSC) is a well-established framework for the management of a company as it integrates financial and non-financial perspectives. Little attention has been given to its theoretical and conceptual valuation. We illustrate how the stakeholder value theory corresponds with the concept of the BSC and show the importance of underlying cause-and-effect relationships between its perspectives. For the case of clearing in Europe which is currently facing profound changes, we present our three-phased approach how to adjust and to extend Kaplan and Norton’s original concept. We modify the generic BSC by adding risk management as a separate perspective and by integrating competition and IT. Based on multiple case studies, we then validate whether the modified BSC is suited to meet the specifics of the clearing industry.

A balanced scorecard for health services in Afghanistan.

PubMed

Peters, David H; Noor, Ayan Ahmed; Singh, Lakhwinder P; Kakar, Faizullah K; Hansen, Peter M; Burnham, Gilbert

2007-02-01

The Ministry of Public Health (MOPH) in Afghanistan has developed a balanced scorecard (BSC) to regularly monitor the progress of its strategy to deliver a basic package of health services. Although frequently used in other health-care settings, this represents the first time that the BSC has been employed in a developing country. The BSC was designed via a collaborative process focusing on translating the vision and mission of the MOPH into 29 core indicators and benchmarks representing six different domains of health services, together with two composite measures of performance. In the absence of a routine health information system, the 2004 BSC for Afghanistan was derived from a stratified random sample of 617 health facilities, 5719 observations of patient-provider interactions, and interviews with 5597 patients, 1553 health workers, and 13,843 households. Nationally, health services were found to be reaching more of the poor than the less-poor population, and providing for more women than men, both key concerns of the government. However, serious deficiencies were found in five domains, and particularly in counselling patients, providing delivery care during childbirth, monitoring tuberculosis treatment, placing staff and equipment, and establishing functional village health councils. The BSC also identified wide variations in performance across provinces; no province performed better than the others across all domains. The innovative adaptation of the BSC in Afghanistan has provided a useful tool to summarize the multidimensional nature of health-services performance, and is enabling managers to benchmark performance and identify strengths and weaknesses in the Afghan context.

Novel edge treatment method for improving the transmission reconstruction quality in Tomographic Gamma Scanning.

PubMed

Han, Miaomiao; Guo, Zhirong; Liu, Haifeng; Li, Qinghua

2018-05-01

Tomographic Gamma Scanning (TGS) is a method used for the nondestructive assay of radioactive wastes. In TGS, the actual irregular edge voxels are regarded as regular cubic voxels in the traditional treatment method. In this study, in order to improve the performance of TGS, a novel edge treatment method is proposed that considers the actual shapes of these voxels. The two different edge voxel treatment methods were compared by computing the pixel-level relative errors and normalized mean square errors (NMSEs) between the reconstructed transmission images and the ideal images. Both methods were coupled with two different interative algorithms comprising Algebraic Reconstruction Technique (ART) with a non-negativity constraint and Maximum Likelihood Expectation Maximization (MLEM). The results demonstrated that the traditional method for edge voxel treatment can introduce significant error and that the real irregular edge voxel treatment method can improve the performance of TGS by obtaining better transmission reconstruction images. With the real irregular edge voxel treatment method, MLEM algorithm and ART algorithm can be comparable when assaying homogenous matrices, but MLEM algorithm is superior to ART algorithm when assaying heterogeneous matrices. Copyright © 2018 Elsevier Ltd. All rights reserved.

Design and Performance Checks of the NPL Axial Heat Flow Apparatus

NASA Astrophysics Data System (ADS)

Wu, J.; Clark, J.; Stacey, C.; Salmon, D.

2015-03-01

This paper describes the design and performance checks of the NPL axial heat flow apparatus developed at the National Physical Laboratory for measurement of thermal conductivity. This apparatus is based on an absolute steady-state technique and is suitable for measuring specimens with thermal conductivities in the range from to and at temperatures between and . A uniform heat flow is induced in a cylindrical bar-shaped specimen that is firmly clamped between a guarded heater unit at the top and a water-cooled base. Heat is supplied at a known rate at the top end of the specimen by the heater unit and constrained to flow axially through the specimen by a surrounding edge-guard system, which is closely matched to the temperature gradient within the test specimen. The performance of this apparatus has been checked against existing NPL thermal-conductivity reference materials NPL 2S89 (based on Stainless Steel 310) and BSC Pure Iron (pure iron supplied by the British Steel Corporation with 99.96 % purity). The measured data produced by the newly designed NPL axial heat flow apparatus agree with the reference data for NPL 2S89 within 2 % and with that of BSC Pure Iron to within 3 % at temperatures from to . This apparatus is being used to provide accurate measurements to industrial and academic organizations and has also been used to develop a new range of NPL reference materials for checking other experimental techniques and procedures for thermal-conductivity measurements.

Modeling of edge effect in subaperture tool influence functions of computer controlled optical surfacing.

PubMed

Wan, Songlin; Zhang, Xiangchao; He, Xiaoying; Xu, Min

2016-12-20

Computer controlled optical surfacing requires an accurate tool influence function (TIF) for reliable path planning and deterministic fabrication. Near the edge of the workpieces, the TIF has a nonlinear removal behavior, which will cause a severe edge-roll phenomenon. In the present paper, a new edge pressure model is developed based on the finite element analysis results. The model is represented as the product of a basic pressure function and a correcting function. The basic pressure distribution is calculated according to the surface shape of the polishing pad, and the correcting function is used to compensate the errors caused by the edge effect. Practical experimental results demonstrate that the new model can accurately predict the edge TIFs with different overhang ratios. The relative error of the new edge model can be reduced to 15%.

SATCOM antenna siting study on a P-3C using the NEC-BSC V3.1

NASA Technical Reports Server (NTRS)

Bensman, D.; Marhefka, R. J.

1990-01-01

The location of a UHF SATCOM antenna on a P-3C aircraft is studied using the NEC-Basic Scattering Code V3.1 (NEC-BSC3). The NEC-BSC3 is a computer code based on the uniform theory of diffraction. The code is first validated for this application using scale model measurements. In general, the comparisons are good except in 10 degree regions near the nose and tail of the aircraft. Patterns for various antenna locations are analyzed to achieve a prescripted performance.

Edge Modeling by Two Blur Parameters in Varying Contrasts.

PubMed

Seo, Suyoung

2018-06-01

This paper presents a method of modeling edge profiles with two blur parameters, and estimating and predicting those edge parameters with varying brightness combinations and camera-to-object distances (COD). First, the validity of the edge model is proven mathematically. Then, it is proven experimentally with edges from a set of images captured for specifically designed target sheets and with edges from natural images. Estimation of the two blur parameters for each observed edge profile is performed with a brute-force method to find parameters that produce global minimum errors. Then, using the estimated blur parameters, actual blur parameters of edges with arbitrary brightness combinations are predicted using a surface interpolation method (i.e., kriging). The predicted surfaces show that the two blur parameters of the proposed edge model depend on both dark-side edge brightness and light-side edge brightness following a certain global trend. This is similar across varying CODs. The proposed edge model is compared with a one-blur parameter edge model using experiments of the root mean squared error for fitting the edge models to each observed edge profile. The comparison results suggest that the proposed edge model has superiority over the one-blur parameter edge model in most cases where edges have varying brightness combinations.

An Evaluation of Treatment Patterns and Outcomes in Elderly Patients Newly Diagnosed With Acute Myeloid Leukemia: A Retrospective Analysis of Electronic Medical Records From US Community Oncology Practices.

PubMed

Ma, Esprit; Bonthapally, Vijayveer; Chawla, Anita; Lefebvre, Patrick; Swords, Ronan; Lafeuille, Marie-Hélène; Fortier, Jonathan; Emond, Bruno; Duh, Mei Sheng; Dezube, Bruce J

2016-11-01

Many elderly patients with acute myeloid leukemia (AML) are considered ineligible for standard intensive induction therapy due to performance status and comorbidities. We analyzed treatment patterns and outcomes among elderly patients newly diagnosed with AML in the US community oncology setting. A retrospective observational study was conducted using patient-level data from a network of US community oncology practices provided by Altos Solutions. Patients aged ≥ 60 years, diagnosed with AML between November 2005 and February 2014, with ≥ 1 recorded visit and ≥ 6 months between diagnosis and data cutoff, were included. Only patients who received active treatment or best supportive care (BSC) per National Comprehensive Cancer Network (NCCN) AML Guidelines were analyzed. Of 1139 patients meeting the inclusion criteria, 922 (median age 76 years) received NCCN-recommended treatments: standard induction (n = 5), low-intensity therapy (n = 425), BSC with hydroxyurea (HU) (n = 36), or BSC without HU (n = 455). For the low-intensity therapy cohort, median time from diagnosis to treatment initiation was 17 days; median duration of therapy was 5.1 months. Median overall survival (OS) from diagnosis in the low-intensity, BSC with HU, and BSC without HU groups was 12.3, 7.0, and 49.4 months, respectively. Median time to next therapy/death was 10.1 months in patients receiving low-intensity therapy. A higher proportion of patients receiving low-intensity therapy required transfusion or other supportive care versus those receiving BSC. As expected, OS in patients receiving low-intensity therapy or BSC with HU is poor for elderly patients with AML. Remarkably, intensive induction strategies are rarely used for older patients in community oncology practice. Copyright © 2016 The Author(s). Published by Elsevier Inc. All rights reserved.

Matched-Pair Comparison of Radioembolization Plus Best Supportive Care Versus Best Supportive Care Alone for Chemotherapy Refractory Liver-Dominant Colorectal Metastases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seidensticker, Ricarda, E-mail: ricarda.seidensticker@med.ovgu.de; Denecke, Timm; Kraus, Patrick

2012-10-15

Purpose: This study was designed to evaluate overall survival after radioembolization or best supportive care (BSC) in patients with chemotherapy-refractory liver-dominant metastatic colorectal cancer (mCRC). Methods: This was a matched-pair comparison of patients who received radioembolization plus BSC or BSC alone for extensive liver disease. Twenty-nine patients who received radioembolization were retrospectively matched with a contemporary cohort of >500 patients who received BSC from 3 centers in Germany. Using clinical databases, patients were initially matched for prior treatments and tumor burden and then 29 patients were consecutively identified with two or more of four matching criteria: synchronous/metachronous metastases, tumor burden,more » increased ALP, and/or CEA >200 U/ml. Survival was calculated from date of progression before radioembolization or BSC by using Kaplan-Meier analysis. Results: Of 29 patients in each study arm, 16 pairs (55.2%) matched for all four criteria, and 11 pairs (37.9%) matched three criteria. Patients in both groups had a similar performance status (Karnofsky index, median 80% [range, 60-100%]). Compared with BSC alone, radioembolization prolonged survival (median, 8.3 vs. 3.5 months; P < 0.001) with a hazard ratio of 0.3 (95% confidence interval, 0.16-0.55; P < 0.001) in a multivariate Cox proportional hazard model. Treatment-related adverse events following radioembolization included: grade 1-2 fatigue (n = 20, 69%), grade 1 abdominal pain/nausea (n = 14, 48.3%), and grade 2 gastrointestinal ulceration (n = 3, 10.3%). Three cases of grade 3 radiation-induced liver disease were symptomatically managed. Conclusions: Radioembolization offers a promising addition to BSC in treatment-refractory patients for whom there are limited options. Survival was prolonged and adverse events were generally mild-to-moderate in nature and manageable.« less

Air flow optimization for energy efficient blower of biosafety cabinet class II A2

NASA Astrophysics Data System (ADS)

Ibrahim, M. D.; Mohtar, M. Z.; Alias, A. A.; Wong, L. K.; Yunos, Y. S.; Rahman, M. R. A.; Zulkharnain, A.; Tan, C. S.; Thayan, R.

2017-04-01

An energy efficient Biosafety Cabinet (BSC) has become a big challenge for manufacturers to develop BSC with the highest level of protection. The objective of research is to increase air flow velocity discharge from centrifugal blower. An aerodynamic duct shape inspired by the shape of Peregrine Falcon’s wing during diving flight is added to the end of the centrifugal blower. Investigation of air movement is determined by computational fluid dynamics (CFD) simulation. The results showed that air velocity can be increased by double compared to typical manufactured BSC and no air recirculation. As conclusion, a novel design of aerodynamic duct shape successfully developed and proved that air velocity can be increase naturally with same impeller speed. It can contribute in increasing energy efficiency of the centrifugal blower. It is vital to BSC manufacturer and can be apply to Heating, Air Ventilation and Air Conditioning (HVAC) industries.

Photomask CD and LER characterization using Mueller matrix spectroscopic ellipsometry

NASA Astrophysics Data System (ADS)

Heinrich, A.; Dirnstorfer, I.; Bischoff, J.; Meiner, K.; Ketelsen, H.; Richter, U.; Mikolajick, T.

2014-10-01

Critical dimension and line edge roughness on photomask arrays are determined with Mueller matrix spectroscopic ellipsometry. Arrays with large sinusoidal perturbations are measured for different azimuth angels and compared with simulations based on rigorous coupled wave analysis. Experiment and simulation show that line edge roughness leads to characteristic changes in the different Mueller matrix elements. The influence of line edge roughness is interpreted as an increase of isotropic character of the sample. The changes in the Mueller matrix elements are very similar when the arrays are statistically perturbed with rms roughness values in the nanometer range suggesting that the results on the sinusoidal test structures are also relevant for "real" mask errors. Critical dimension errors and line edge roughness have similar impact on the SE MM measurement. To distinguish between both deviations, a strategy based on the calculation of sensitivities and correlation coefficients for all Mueller matrix elements is shown. The Mueller matrix elements M13/M31 and M34/M43 are the most suitable elements due to their high sensitivities to critical dimension errors and line edge roughness and, at the same time, to a low correlation coefficient between both influences. From the simulated sensitivities, it is estimated that the measurement accuracy has to be in the order of 0.01 and 0.001 for the detection of 1 nm critical dimension error and 1 nm line edge roughness, respectively.

Use of Self-Organizing Maps for Balanced Scorecard analysis to monitor the performance of dialysis clinic chains.

PubMed

Cattinelli, Isabella; Bolzoni, Elena; Barbieri, Carlo; Mari, Flavio; Martin-Guerrero, José David; Soria-Olivas, Emilio; Martinez-Martinez, José Maria; Gomez-Sanchis, Juan; Amato, Claudia; Stopper, Andrea; Gatti, Emanuele

2012-03-01

The Balanced Scorecard (BSC) is a validated tool to monitor enterprise performances against specific objectives. Through the choice and the evaluation of strategic Key Performance Indicators (KPIs), it provides a measure of the past company's outcome and allows planning future managerial strategies. The Fresenius Medical Care (FME) BSC makes use of 30 KPIs for a continuous quality improvement strategy within its dialysis clinics. Each KPI is monthly associated to a score that summarizes the clinic efficiency for that month. Standard statistical methods are currently used to analyze the BSC data and to give a comprehensive view of the corporate improvements to the top management. We herein propose the Self-Organizing Maps (SOMs) as an innovative approach to extrapolate information from the FME BSC data and to present it in an easy-readable informative form. A SOM is a computational technique that allows projecting high-dimensional datasets to a two-dimensional space (map), thus providing a compressed representation. The SOM unsupervised (self-organizing) training procedure results in a map that preserves similarity relations existing in the original dataset; in this way, the information contained in the high-dimensional space can be more easily visualized and understood. The present work demonstrates the effectiveness of the SOM approach in extracting useful information from the 30-dimensional BSC dataset: indeed, SOMs enabled both to highlight expected relationships between the KPIs and to uncover results not predictable with traditional analyses. Hence we suggest SOMs as a reliable complementary approach to the standard methods for BSC interpretation.

Compression of digital images over local area networks. Appendix 1: Item 3. M.S. Thesis

NASA Technical Reports Server (NTRS)

Gorjala, Bhargavi

1991-01-01

Differential Pulse Code Modulation (DPCM) has been used with speech for many years. It has not been as successful for images because of poor edge performance. The only corruption in DPC is quantizer error but this corruption becomes quite large in the region of an edge because of the abrupt changes in the statistics of the signal. We introduce two improved DPCM schemes; Edge correcting DPCM and Edge Preservation Differential Coding. These two coding schemes will detect the edges and take action to correct them. In an Edge Correcting scheme, the quantizer error for an edge is encoded using a recursive quantizer with entropy coding and sent to the receiver as side information. In an Edge Preserving scheme, when the quantizer input falls in the overload region, the quantizer error is encoded and sent to the receiver repeatedly until the quantizer input falls in the inner levels. Therefore these coding schemes increase the bit rate in the region of an edge and require variable rate channels. We implement these two variable rate coding schemes on a token wing network. Timed token protocol supports two classes of messages; asynchronous and synchronous. The synchronous class provides a pre-allocated bandwidth and guaranteed response time. The remaining bandwidth is dynamically allocated to the asynchronous class. The Edge Correcting DPCM is simulated by considering the edge information under the asynchronous class. For the simulation of the Edge Preserving scheme, the amount of information sent each time is fixed, but the length of the packet or the bit rate for that packet is chosen depending on the availability capacity. The performance of the network, and the performance of the image coding algorithms, is studied.

The Red Edge Problem in asteroid band parameter analysis

NASA Astrophysics Data System (ADS)

Lindsay, Sean S.; Dunn, Tasha L.; Emery, Joshua P.; Bowles, Neil E.

2016-04-01

Near-infrared reflectance spectra of S-type asteroids contain two absorptions at 1 and 2 μm (band I and II) that are diagnostic of mineralogy. A parameterization of these two bands is frequently employed to determine the mineralogy of S(IV) asteroids through the use of ordinary chondrite calibration equations that link the mineralogy to band parameters. The most widely used calibration study uses a Band II terminal wavelength point (red edge) at 2.50 μm. However, due to the limitations of the NIR detectors on prominent telescopes used in asteroid research, spectral data for asteroids are typically only reliable out to 2.45 μm. We refer to this discrepancy as "The Red Edge Problem." In this report, we evaluate the associated errors for measured band area ratios (BAR = Area BII/BI) and calculated relative abundance measurements. We find that the Red Edge Problem is often not the dominant source of error for the observationally limited red edge set at 2.45 μm, but it frequently is for a red edge set at 2.40 μm. The error, however, is one sided and therefore systematic. As such, we provide equations to adjust measured BARs to values with a different red edge definition. We also provide new ol/(ol+px) calibration equations for red edges set at 2.40 and 2.45 μm.

Service quality in contracted facilities.

PubMed

Rabbani, Fauziah; Pradhan, Nousheen Akber; Zaidi, Shehla; Azam, Syed Iqbal; Yousuf, Farheen

2015-01-01

The purpose of this paper is to explore the readiness of contracted and non-contracted first-level healthcare facilities in Pakistan to deliver quality maternal and neonatal health (MNH) care. A balanced scorecard (BSC) was used as the assessment framework. Using a cross-sectional study design, two rural health centers (RHCs) contracted out to Aga Khan Health Service, Pakistan were compared with four government managed RHCs. A BSC was designed to assess RHC readiness to deliver good quality MNH care. In total 20 indicators were developed, representing five BSC domains: health facility functionality, service provision, staff capacity, staff and patient satisfaction. Validated data collection tools were used to collect information. Pearson χ2, Fisher's Exact and the Mann-Whitney tests were applied as appropriate to detect significant service quality differences among the two facilities. Contracted facilities were generally found to be better than non-contracted facilities in all five BSC domains. Patients' inclination for facility-based delivery at contracted facilities was, however, significantly higher than non-contracted facilities (80 percent contracted vs 43 percent non-contracted, p=0.006). The study shows that contracting out initiatives have the potential to improve MNH care. This is the first study to compare MNH service delivery quality across contracted and non-contracted facilities using BSC as the assessment framework.

Processing Images of Craters for Spacecraft Navigation

NASA Technical Reports Server (NTRS)

Cheng, Yang; Johnson, Andrew E.; Matthies, Larry H.

2009-01-01

A crater-detection algorithm has been conceived to enable automation of what, heretofore, have been manual processes for utilizing images of craters on a celestial body as landmarks for navigating a spacecraft flying near or landing on that body. The images are acquired by an electronic camera aboard the spacecraft, then digitized, then processed by the algorithm, which consists mainly of the following steps: 1. Edges in an image detected and placed in a database. 2. Crater rim edges are selected from the edge database. 3. Edges that belong to the same crater are grouped together. 4. An ellipse is fitted to each group of crater edges. 5. Ellipses are refined directly in the image domain to reduce errors introduced in the detection of edges and fitting of ellipses. 6. The quality of each detected crater is evaluated. It is planned to utilize this algorithm as the basis of a computer program for automated, real-time, onboard processing of crater-image data. Experimental studies have led to the conclusion that this algorithm is capable of a detection rate >93 percent, a false-alarm rate <5 percent, a geometric error <0.5 pixel, and a position error <0.3 pixel.

Interactive Video Coding and Transmission over Heterogeneous Wired-to-Wireless IP Networks Using an Edge Proxy

NASA Astrophysics Data System (ADS)

Pei, Yong; Modestino, James W.

2004-12-01

Digital video delivered over wired-to-wireless networks is expected to suffer quality degradation from both packet loss and bit errors in the payload. In this paper, the quality degradation due to packet loss and bit errors in the payload are quantitatively evaluated and their effects are assessed. We propose the use of a concatenated forward error correction (FEC) coding scheme employing Reed-Solomon (RS) codes and rate-compatible punctured convolutional (RCPC) codes to protect the video data from packet loss and bit errors, respectively. Furthermore, the performance of a joint source-channel coding (JSCC) approach employing this concatenated FEC coding scheme for video transmission is studied. Finally, we describe an improved end-to-end architecture using an edge proxy in a mobile support station to implement differential error protection for the corresponding channel impairments expected on the two networks. Results indicate that with an appropriate JSCC approach and the use of an edge proxy, FEC-based error-control techniques together with passive error-recovery techniques can significantly improve the effective video throughput and lead to acceptable video delivery quality over time-varying heterogeneous wired-to-wireless IP networks.

Identification of factors influencing the restoration of cyanobacteria-dominated biological soil crusts.

PubMed

Bu, Chongfeng; Wu, Shufang; Yang, Yongsheng; Zheng, Mingguo

2014-01-01

Biological soil crusts (BSCs) cover >35% of the Earth's land area and contribute to important ecological functions in arid and semiarid ecosystems, including erosion reduction, hydrological cycling, and nutrient cycling. Artificial rapid cultivation of BSCs can provide a novel alternative to traditional biological methods for controlling soil and water loss such as the planting of trees, shrubs, and grasses. At present, little is known regarding the cultivation of BSCs in the field due to lack of knowledge regarding the influencing factors that control BSCs growth. Thus, we determined the effects of various environmental factors (shade; watering; N, P, K, and Ca concentrations) on the growth of cyanobacteria-dominated BSCs from the Sonoran Desert in the southwestern United States. The soil surface changes and chlorophyll a concentrations were used as proxies of BSC growth and development. After 4 months, five factors were found to impact BSC growth with the following order of importance: NH4NO3 ≈ watering frequency>shading>CaCO3 ≈ KH2PO4. The soil water content was the primary positive factor affecting BSC growth, and BSCs that were watered every 5 days harbored greater biomass than those watered every 10 days. Groups that received NH4NO3 consistently exhibited poor growth, suggesting that fixed N amendment may suppress BSC growth. The effect of shading on the BSC biomass was inconsistent and depended on many factors including the soil water content and availability of nutrients. KH2PO4 and CaCO3 had nonsignificant effects on BSC growth. Collectively, our results indicate that the rapid restoration of BSCs can be controlled and realized by artificial "broadcasting" cultivation through the optimization of environmental factors.

The Effects of Bushen Capsule on Episodic Memory in Amnestic Mild Cognitive Impairment Patients: A Pilot Placebo Controlled fMRI Study.

PubMed

Zhang, Junying; Xu, Kai; Wei, Dongfeng; Guo, Rongjuan; Li, He; Wang, Yongyan; Zhang, Zhanjun

2015-01-01

Observing the effects of a drug on episodic memory and the underlying brain function has extreme significance in evaluating its therapeutic value in treating amnestic mild cognitive impairment (aMCI). To observe the effects of Bushen capsule (BSC), a Chinese herbal medicine, on episodic memory in aMCI and further explore the underlying mechanism. 44 aMCI patients from hospitals and local communities in Beijing were randomly divided into the BSC treatment group (22 patients orally treated with BSC) and the placebo group (22 patients treated with placebo). The duration of intervention lasted for 3 months. Before and after the 3 months treatment, neuropsychological tests and fMRI examinations were carried out to assess cognitive ability and brain activation changes, respectively. Compared to the placebo group, the BSC group presented a significant increase in the AVLT(N5) (p = 0.003) and Stroop (C-B) time (p = 0.002). fMRI results showed a reduction of brain negative activation in the right middle temporal gyrus and a positive activation enhancement in the right putamen among the BSC group after treatment. Meanwhile, the variation in activation values in the right middle temporal gyrus was significantly correlated with the improvement in test values of AVLT(N5), and the variation in deactivation values in the right putamen was significantly correlated with the improvement in test values of Stroop (C-B) time. BSC can improve the behavioral performances of episodic memory in aMCI; this effect may be related to its modulation on the activations of the temporal lobe and the putamen under episodic memory encoding task.

Unconscious integration of multisensory bodily inputs in the peripersonal space shapes bodily self-consciousness.

PubMed

Salomon, Roy; Noel, Jean-Paul; Łukowska, Marta; Faivre, Nathan; Metzinger, Thomas; Serino, Andrea; Blanke, Olaf

2017-09-01

Recent studies have highlighted the role of multisensory integration as a key mechanism of self-consciousness. In particular, integration of bodily signals within the peripersonal space (PPS) underlies the experience of the self in a body we own (self-identification) and that is experienced as occupying a specific location in space (self-location), two main components of bodily self-consciousness (BSC). Experiments investigating the effects of multisensory integration on BSC have typically employed supra-threshold sensory stimuli, neglecting the role of unconscious sensory signals in BSC, as tested in other consciousness research. Here, we used psychophysical techniques to test whether multisensory integration of bodily stimuli underlying BSC also occurs for multisensory inputs presented below the threshold of conscious perception. Our results indicate that visual stimuli rendered invisible through continuous flash suppression boost processing of tactile stimuli on the body (Exp. 1), and enhance the perception of near-threshold tactile stimuli (Exp. 2), only once they entered PPS. We then employed unconscious multisensory stimulation to manipulate BSC. Participants were presented with tactile stimulation on their body and with visual stimuli on a virtual body, seen at a distance, which were either visible or rendered invisible. We found that participants reported higher self-identification with the virtual body in the synchronous visuo-tactile stimulation (as compared to asynchronous stimulation; Exp. 3), and shifted their self-location toward the virtual body (Exp.4), even if stimuli were fully invisible. Our results indicate that multisensory inputs, even outside of awareness, are integrated and affect the phenomenological content of self-consciousness, grounding BSC firmly in the field of psychophysical consciousness studies. Copyright © 2017 Elsevier B.V. All rights reserved.

Multidimensional evaluation of performance with experimental application of balanced scorecard: a two year experience

PubMed Central

2011-01-01

Background In today's dynamic health-care system, organizations such as hospitals are required to improve their performance for multiple stakeholders and deliver an integrated care that means to work effectively, be innovative and organize efficiently. Achieved goals and levels of quality can be successfully measured by a multidimensional approach like Balanced Scorecard (BSC). The aim of the study was to verify the opportunity to introduce BSC framework to measure performance in St. Anna University Hospital of Ferrara, applying it to the Clinical Laboratory Operative Unit in order to compare over time performance results and achievements of assigned targets. Methods In the first experience with BSC we distinguished four perspectives, according to Kaplan and Norton, identified Key Performance Areas and Key Performance Indicators, set standards and weights for each objective, collected data for all indicators, recognized cause-and-effect relationships in a strategic map. One year later we proceeded with the next data collection and analysed the preservation of framework aptitude to measure Operative Unit performance. In addition, we verified the ability to underline links between strategic actions belonging to different perspectives in producing outcomes changes. Results The BSC was found to be effective for underlining existing problems and identifying opportunities for improvements. The BSC also revealed the specific perspective contribution to overall performance enhancement. After time results comparison was possible depending on the selection of feasible and appropriate key performance indicators, which was occasionally limited by data collection problems. Conclusions The first use of BSC to compare performance at Operative Unit level, in course of time, suggested this framework can be successfully adopted for results measuring and revealing effective health factors, allowing health-care quality improvements. PMID:21586111

Multidimensional evaluation of performance with experimental application of balanced scorecard: a two year experience.

PubMed

Lupi, Silvia; Verzola, Adriano; Carandina, Gianni; Salani, Manuela; Antonioli, Paola; Gregorio, Pasquale

2011-05-17

In today's dynamic health-care system, organizations such as hospitals are required to improve their performance for multiple stakeholders and deliver an integrated care that means to work effectively, be innovative and organize efficiently. Achieved goals and levels of quality can be successfully measured by a multidimensional approach like Balanced Scorecard (BSC). The aim of the study was to verify the opportunity to introduce BSC framework to measure performance in St. Anna University Hospital of Ferrara, applying it to the Clinical Laboratory Operative Unit in order to compare over time performance results and achievements of assigned targets. In the first experience with BSC we distinguished four perspectives, according to Kaplan and Norton, identified Key Performance Areas and Key Performance Indicators, set standards and weights for each objective, collected data for all indicators, recognized cause-and-effect relationships in a strategic map. One year later we proceeded with the next data collection and analysed the preservation of framework aptitude to measure Operative Unit performance. In addition, we verified the ability to underline links between strategic actions belonging to different perspectives in producing outcomes changes. The BSC was found to be effective for underlining existing problems and identifying opportunities for improvements. The BSC also revealed the specific perspective contribution to overall performance enhancement. After time results comparison was possible depending on the selection of feasible and appropriate key performance indicators, which was occasionally limited by data collection problems. The first use of BSC to compare performance at Operative Unit level, in course of time, suggested this framework can be successfully adopted for results measuring and revealing effective health factors, allowing health-care quality improvements.

Local knowledge and perception of biological soil crusts by land users in the Sahel (Niger)

NASA Astrophysics Data System (ADS)

J-M Ambouta, K.; Hassan Souley, B.; Malam Issa, O.; Rajot, J. L.; Mohamadou, A.

2012-04-01

Local knowledge, i.e. knowledge based on accumulation of observations is of great interest for many scientific fields as it can help for identification, evaluation and selection of relevant indicators and furthermore for progress through conservation goals. This study aimed at gathering and understanding the local knowledge and perception of biological soil crusts (BSC) by users of land, pastoralists that cross the Sahel and sedentary farmers. The methodological approach is based on a semi-direct surveys conducted on a north-south rainfall gradient (350 to 650 mm/year) including agricultural- and pastoral-dominated areas in western Niger. Denomination, formation processes, occurrence, distribution and role of biological soil crusts are among the major issues of the inquiry. The results of the surveys showed that BSC are mainly identified by the names of "Bankwado" and "Korobanda", respectively in hausa and zarma langages, what means "toad back". Other denominations varying according to region, ethnic groups and users are used. They are all related to the aspects, colors and behaviour of BSC with regard wetting and drying cycle. From the point of view of users depressed areas and land lied fallow are favourable places for the occurrence of BSC, while cultivation and observed changes in rainfall regimes represent negative factors. The formation processes of BSC are mainly related to the occurrence and the impact of rain and wind on soil surface. Their roles in protecting soil against degradation or as an indicator of soil fertility were recognised by at least 83% of farmers and breeders. This study reveals significant aspects of BSC already validated by scientific knowledge. Integrating the two forms of knowledge will help to define relevant indicators of soil surface dynamics and to perform practices to minimize farming and grazing impacts on BSCs.

A preliminary report on the measurements of forest canopies with C-band radar scatterometer at NASA/NSTL

NASA Technical Reports Server (NTRS)

Wu, S. T.

1985-01-01

This paper presents preliminary results of C-band radar scatterometer measurements of forest canopies of southeastern forests in the vicinity of NASA/NSTL. The results are as follows: (1) the radar backscattering coefficients (BSC) of deciduous forests such as oak, maple, blackgum, and cypress are higher than those of coniferous forests such as slash pine plantation and natural pine; (2) at a large incidence angle, where polarization effect is significant, and by ranging measurement, the VV polarization BSC obtain peak value at the first few meters from the canopy top and decrease rather quickly, while the HH polarization BSC obtain peak value at longer distances from the canopy top and decrease rather slowly through the canopy; and (3) using the active radar calibrator for tree canopy attenuation measurement of a dense and a sparse live oak, it is found that the tree canopies with higher attenuations have higher BSC for all three polarizations, with VV polarization containing the largest differential (2.2 dB).

Performance Management in Healthcare Organizations: Concept and Practicum.

PubMed

Dimitropoulos, Panagiotis E

2017-01-01

Organizational performance can create and sustain competitive advantages for corporations and even improve their sustainability and future prospects. Health care organizations present a sector where performance management is structured by multiple dimensions. The scope of this study is to analyze the issue of performance management in healthcare organizations and specifically the implementation of the Balanced Scorecard (BSC) methodology on organizations providing health services. The study provides a discussion on the BSC development process, the steps that management has to take in order to prepare the implementation of the BSC and finally discusses a practical example of a scorecard with specific strategic goals and performance indicators. Managers of healthcare organizations and specifically those providing services to the elderly and the general population could use the propositions of the study as a roadmap for processing, analyzing, evaluating and implementing the balanced scorecard approach in their organizations' daily operations. BSC methodology can give an advantage in terms of enhanced stakeholder management and preservation within a highly volatile and competitive economic environment.

Teaching the Balanced Scorecard through Simulation

ERIC Educational Resources Information Center

Capelo, Carlos; Lopes, Ana Isabel; Mata, Ana

2012-01-01

Kaplan and Norton introduced the Balanced Scorecard (BSC) which is based on a systems perspective of the business strategy and performance measurement. Many organizations around the world are using the BSC to define, implement and manage strategy. Nevertheless there exist studies that identify problems and limitations associated with the…

Biological soil crust as a bio-mediator alters hydrological processes in stabilized dune system of the Tengger Desert, China

NASA Astrophysics Data System (ADS)

Li, Xinrong

2016-04-01

Biological soil crust (BSC) is a vital component in the stabilized sand dunes with a living cover up to more than 70% of the total, which has been considered as a bio-mediator that directly influences and regulates the sand dune ecosystem processes. However, its influences on soil hydrological processes have been long neglected in Chinese deserts. In this study, BSCs of different successional stages were chose to test their influence on the hydrological processes of stabilized dune, where the groundwater deep exceeds 30m, further to explore why occur the sand-binding vegetation replacement between shrubs and herbs. Our long-term observation (60 years) shows that cyanobacteria crust has been colonized and developed after 3 years since the sand-binding vegetation has been established and dune fixation using planted xerophytic shrubs and made sand barrier (straw-checkerboard) on shifting dune surface, lichen and moss crust occurred after 20 years, and the cover of moss dominated crust could reach 70 % after 50 years. The colonization and development of BSC altered the initial soil water balance of revegetated areas by influencing rainfall infiltration, soil evaporation and dew water entrapment. The results show that BSC obviously reduced the infiltration that occurred during most rainfall events (80%), when rainfall was greater than 5 mm or less than 20 mm. The presence of BSC reduced evaporation of topsoil after small rainfall (<5 mm) because its high proportion of finer particles slowed the evaporation rate, thus keeping the water in the soil surface longer, and crust facilitated topsoil evaporation when rainfall reached 10 mm. The amount of dew entrapment increases with the succession of BSC. Moreover, the effect of the later successional BSC to dew entrapment, rainfall infiltration and evaporation was more obvious than the early successional BSC on stabilized dunes. In general, BSC reduced the amount of rainfall water that reached deeper soil (0.4-3m), which is where the roots of shrubs are primarily distributed. These changes in the soil moisture pattern induced shifting of sand-binding vegetation from initial planted xerophytic shrub communities with higher coverage (35%) to complex communities dominated by shallow-rooted herbaceous species with low shrub coverage (9%). In correspondence with these changes, soil water balance of the initial vegetation systems (mean soil water kept 3.5%) was turned into a new balance of current vegetation (mean soil water maintains 1.5%). Above findings provide an important enlightenment for future desertification control and sand hazards prevention by revegetation.

Islamic value to the modification of BSC model (a case study in evaluating company performance)

NASA Astrophysics Data System (ADS)

Harwati; Permana, Y.

2017-12-01

Halal is the key word for the Muslim community in consuming goods or services. Providing halal products is the main focus for companies with the largest consumers from the Muslim community. Halal is not only from the ingredients but also from the process in its production. The purpose of this study is to design a model of performance measurement for a company in order to provide halal products. Balance Score Card (BSC) is used as a framework. BSC as a performance measurement system has advantages not only focus on financial aspect but also non finance. Islamic values are incorporated into four perspective of BSC. They are: Selection of sharia financial institutions in financial perspective, payment method by consumer in consumer perspective, number of product with halal certificate and menu clarify in internal business process perspective, then accuracy of payroll time in learning and growth perspective. The modified BSC model obtains 17 Key Performance Indicators (KPI). The model is applied in a culinary industry (restaurant). Structured questionnaires and scheduled interviews are used to collect the important data. The result show that these industry fail to meet 8 from total 17 KPI so performance achievement is only 70.81%, and only reach 22.58% in Islamic value aspect. This is recorded by the company as an input to improve their performance in order to compete in halal food business.

Performance evaluation of Al-Zahra academic medical center based on Iran balanced scorecard model.

PubMed

Raeisi, Ahmad Reza; Yarmohammadian, Mohammad Hossein; Bakhsh, Roghayeh Mohammadi; Gangi, Hamid

2012-01-01

Growth and development in any country's national health system, without an efficient evaluation system, lacks the basic concepts and tools necessary for fulfilling the system's goals. The balanced scorecard (BSC) is a technique widely used to measure the performance of an organization. The basic core of the BSC is guided by the organization's vision and strategies, which are the bases for the formation of four perspectives of BSC. The goal of this research is the performance evaluation of Al-Zahra Academic Medical Center in Isfahan University of Medical Sciences, based on Iran BSC model. This is a combination (quantitative-qualitative) research which was done at Al-Zahra Academic Medical Center in Isfahan University of Medical Sciences in 2011. The research populations were hospital managers at different levels. Sampling method was purposive sampling in which the key informed personnel participated in determining the performance indicators of hospital as the BSC team members in focused discussion groups. After determining the conceptual elements in focused discussion groups, the performance objectives (targets) and indicators of hospital were determined and sorted in perspectives by the group discussion participants. Following that, the performance indicators were calculated by the experts according to the predetermined objectives; then, the score of each indicator and the mean score of each perspective were calculated. Research findings included development of the organizational mission, vision, values, objectives, and strategies. The strategies agreed upon by the participants in the focus discussion group included five strategies, which were customer satisfaction, continuous quality improvement, development of human resources, supporting innovation, expansion of services and improving the productivity. Research participants also agreed upon four perspectives for the Al-Zahra hospital BSC. In the patients and community perspective (customer), two objectives and three indicators were agreed upon, with a mean score of 75.9%. In the internal process perspective, 4 objectives and 14 indicators were agreed upon, with a mean score of 79.37%. In the learning and growth perspective, four objectives and eight indicators were agreed upon, with a mean score of 81.11%. Finally, in the financial perspective, two objectives and five indicators were agreed upon, with a mean score of 67.15%. One way to create demand for hospital services is performance evaluation by paying close attention to all BSC perspectives, especially the non-financial perspectives such as customers and internal processes perspectives. In this study, the BSC showed the differences in performance level of the organization in different perspectives, which would assist the hospital managers improve their performance indicators. The learning and growth perspective obtained the highest score, and the financial perspective obtained the least score. Since the learning and growth perspective acts as a base for all other perspectives and they depend on it, hospitals must continuously improve the service processes and the quality of services by educating staff and updating their policies and procedures. This can increase customer satisfaction and productivity and finally improve the BSC in financial perspective.

[A method of measuring presampled modulation transfer function using a rationalized approximation of geometrical edge slope].

PubMed

Honda, Michitaka

2014-04-01

Several improvements were implemented in the edge method of presampled modulation transfer function measurements (MTFs). The estimation technique for edge angle was newly developed by applying an algorithm for principal components analysis. The error in the estimation was statistically confirmed to be less than 0.01 even in the presence of quantum noise. Secondly, the geometrical edge slope was approximated using a rationalized number, making it possible to obtain an oversampled edge response function (ESF) with equal intervals. Thirdly, the final MTFs were estimated using the average of multiple MTFs calculated for local areas. This averaging operation eliminates the errors caused by the rationalized approximation. Computer-simulated images were used to evaluate the accuracy of our method. The relative error between the estimated MTF and the theoretical MTF at the Nyquist frequency was less than 0.5% when the MTF was expressed as a sinc function. For MTFs representing an indirect detector and phase-contrast detector, good agreement was also observed for the estimated MTFs for each. The high accuracy of the MTF estimation was also confirmed, even for edge angles of around 10 degrees, which suggests the potential for simplification of the measurement conditions. The proposed method could be incorporated into an automated measurement technique using a software application.

Implementation and Performance Evaluation Using the Fuzzy Network Balanced Scorecard

ERIC Educational Resources Information Center

Tseng, Ming-Lang

2010-01-01

The balanced scorecard (BSC) is a multi-criteria evaluation concept that highlights the importance of performance measurement. However, although there is an abundance of literature on the BSC framework, there is a scarcity of literature regarding how the framework with dependence and interactive relationships should be properly implemented in…

76 FR 76416 - Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-07

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR) In accordance with..., Office of Public Health Preparedness and Response (OPHPR), concerning strategies and goals for the...

77 FR 20823 - Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR) In accordance with... Public Health Preparedness and Response (OPHPR), concerning strategies and goals for the programs and...

76 FR 53474 - Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-26

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR) In accordance with... Control and Prevention (CDC), and the Director, Office of Public Health Preparedness and Response (OPHPR...

76 FR 18221 - Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Public Health Preparedness and Response (BSC, OPHPR) In accordance with... of Public Health Preparedness and Response (OPHPR), concerning strategies and goals for the programs...

78 FR 56235 - Board of Scientific Counselors, Office of Public Health Preparedness and Response, (BSC, OPHPR)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-12

... Scientific Counselors, Office of Public Health Preparedness and Response, (BSC, OPHPR) In accordance with..., Office of Public Health Preparedness and Response (OPHPR), concerning strategies and goals for the... Information: Marquita Black, Office of Science and Public Health Practice, Executive Assistant, Centers for...

78 FR 13678 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-28

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) Notice of Cancellation: A notice was... management activities, for both the Centers for Disease Control and Prevention and the Agency for Toxic...

Identifying Balance in a Balanced Scorecard System

ERIC Educational Resources Information Center

Aravamudhan, Suhanya; Kamalanabhan, T. J.

2007-01-01

In recent years, strategic management concepts seem to be gaining greater attention from the academicians and the practitioner's alike. Balanced Scorecard (BSC) concept is one such management concepts that has spread in worldwide business and consulting communities. The BSC translates mission and vision statements into a comprehensive set of…

Applying the Balanced Scorecard to Education

ERIC Educational Resources Information Center

Karathanos, Demetrius; Karathanos, Patricia

2005-01-01

Although the application of the balanced scorecard (BSC) in the business sector is well documented, very little research has been reported regarding the adaptation or application of the BSC in the education sector. In this article, the authors (a) describe how the Baldrige Education Criteria for Performance Excellence has adapted the concept of…

Recruitment and Retention with a Spin

ERIC Educational Resources Information Center

Lindgren, Rita; Hixson, Carla Braun

2010-01-01

Strategic planning and innovation at Bismarck State College (BSC) found common ground in the college's goal to recruit and retain employees in an environment of low unemployment and strong competition for skilled employees. BSC's strategic plan for 2007-09 included the objective "to increase retention of employees." One of the strategies…

78 FR 11651 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-19

... Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH) In accordance with..., research, experiments, and demonstrations relating to occupational safety and health and to mine health... Occupational Safety and Health on research and prevention programs. Specifically, the Board shall provide...

77 FR 47850 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-10

... Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH) In accordance with..., research, experiments, and demonstrations relating to occupational safety and health and to mine health... Occupational Safety and Health on research and prevention programs. Specifically, the Board shall provide...

Real-time line-width measurements: a new feature for reticle inspection systems

NASA Astrophysics Data System (ADS)

Eran, Yair; Greenberg, Gad; Joseph, Amnon; Lustig, Cornel; Mizrahi, Eyal

1997-07-01

The significance of line width control in mask production has become greater with the lessening of defect size. There are two conventional methods used for controlling line widths dimensions which employed in the manufacturing of masks for sub micron devices. These two methods are the critical dimensions (CD) measurement and the detection of edge defects. Achieving reliable and accurate control of line width errors is one of the most challenging tasks in mask production. Neither of the two methods cited above (namely CD measurement and the detection of edge defects) guarantees the detection of line width errors with good sensitivity over the whole mask area. This stems from the fact that CD measurement provides only statistical data on the mask features whereas applying edge defect detection method checks defects on each edge by itself, and does not supply information on the combined result of error detection on two adjacent edges. For example, a combination of a small edge defect together with a CD non- uniformity which are both within the allowed tolerance, may yield a significant line width error, which will not be detected using the conventional methods (see figure 1). A new approach for the detection of line width errors which overcomes this difficulty is presented. Based on this approach, a new sensitive line width error detector was developed and added to Orbot's RT-8000 die-to-database reticle inspection system. This innovative detector operates continuously during the mask inspection process and scans (inspects) the entire area of the reticle for line width errors. The detection is based on a comparison of measured line width that are taken on both the design database and the scanned image of the reticle. In section 2, the motivation for developing this new detector is presented. The section covers an analysis of various defect types, which are difficult to detect using conventional edge detection methods or, alternatively, CD measurements. In section 3, the basic concept of the new approach is introduced together with a description of the new detector and its characteristics. In section 4, the calibration process that took place in order to achieve reliable and repeatable line width measurements is presented. The description of an experiments conducted in order to evaluate the sensitivity of the new detector is given in section 5, followed by a report of the results of this evaluation. The conclusions are presented in section 6.

Ratify, Reject or Revise: Balanced Scorecard and Universities

ERIC Educational Resources Information Center

Sayed, Naqi

2013-01-01

Purpose: The purpose of this paper is to examine the use of the Balanced Scorecard (BSC) in universities. Initially directed toward profit-oriented businesses, the BSC has since been adopted by many non-profit organisations with seemingly diverse objectives. A number of primarily publicly-funded universities and institutions, which are part of…

78 FR 21370 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-10

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

75 FR 69687 - Board of Scientific Counselors, Office of Infectious Diseases, (BSC, OID)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-15

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases, (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

78 FR 11651 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-19

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

78 FR 69683 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-20

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

78 FR 17411 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-21

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

76 FR 24031 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

76 FR 63926 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-14

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

77 FR 21778 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-11

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

75 FR 66772 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

75 FR 55333 - Board of Scientific Counselors, National Center for Health Statistics, (BSC, NCHS)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-10

... Scientific Counselors, National Center for Health Statistics, (BSC, NCHS) In accordance with section 10(a)(2... Prevention (CDC), National Center for Health Statistics (NCHS) announces the following meeting of [email protected] or Virginia Cain, [email protected] at least 10 days in advance for requirements). All visitors...

76 FR 36923 - Meeting of the National Toxicology Program (NTP) Board of Scientific Counselors (BSC): Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-23

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Meeting of the National Toxicology Program (NTP) Board of Scientific Counselors (BSC): Notice of Cancellation AGENCY: National Toxicology Program (NTP), National... Toxicology Program. [FR Doc. 2011-15656 Filed 6-22-11; 8:45 am] BILLING CODE 4140-01-P ...

A Simulation-Based Approach for Teaching the Systems Perspective of Strategic Performance Management

ERIC Educational Resources Information Center

Capelo, Carlos; Lopes, Ana; Mata, Ana

2015-01-01

Kaplan and Norton introduced the balanced scorecard (BSC), which is based on a systems perspective of the business strategy and performance measurement. Many organisations around the world use the BSC to define, implement and manage strategy. Nevertheless, there are studies that identify problems and limitations associated with the implementation…

75 FR 42448 - Board of Scientific Counselors (BSC), Coordinating Center for Health Promotion (CCHP): Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-21

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention (CDC) Board of Scientific Counselors (BSC), Coordinating Center for Health Promotion (CCHP): Notice of Charter Amendment... both the CDC and the Agency for Toxic Substances and Disease Registry. Dated: July 13, 2010. Elaine L...

[Management and accounting solution required in clinical laboratory department in the hospital and the balanced scorecard (BSC)].

PubMed

Takahashi, Toshiro

2006-11-01

This is to describe required accounting knowledge and the techniques for the clinical laboratory department management level people to operate their division from the viewpoint of management. Especially, the necessity and the efficacy of the BSC implementation in the clinical laboratory department are being explained.

78 FR 51729 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-21

... Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH) In accordance with... demonstrations relating to occupational safety and health and to mine health. The Board of Scientific Counselors shall provide guidance to the Director, National Institute for Occupational Safety and Health on...

[Development of nursing key performance indicators for an intensive care unit by using a balanced scorecard].

PubMed

Choi, Yun Jeong; Lim, Ji Young; Lee, Young Whee; Kim, Hwa Soon

2008-10-01

The purpose of this study was to develop visions of nursing service, nursing strategies and key performance indicators (KPIs) for an intensive care unit (ICU) based on a Balanced Scorecard (BSC). This study was undertaken by using methodological research. The development process consisted of four phases; the first phase was to develop the vision of nursing in ICUs. The second phase was to develop strategies according to 4 perspectives of a BSC. The third phase was to develop KPIs according to the 4 perspectives of BSC and the final phase was to combine the nursing visions, strategies and KPIs of ICUs. Two main visions of nursing service for ICUs were established. These were 'realization of harmonized professional nursing with human respect' and 'recovery of health through specialized nursing' respectively. In order to reach the aim of developing nursing visions, thirteen practical strategies and nineteen KPIs were developed by four perspectives of the BSC. The results will be used as objective fundamental data to attain business outcomes for the achievement of nursing visions and strategies of ICUs.

A novel hybrid MCDM model for performance evaluation of research and technology organizations based on BSC approach.

PubMed

Varmazyar, Mohsen; Dehghanbaghi, Maryam; Afkhami, Mehdi

2016-10-01

Balanced Scorecard (BSC) is a strategic evaluation tool using both financial and non-financial indicators to determine the business performance of organizations or companies. In this paper, a new integrated approach based on the Balanced Scorecard (BSC) and multi-criteria decision making (MCDM) methods are proposed to evaluate the performance of research centers of research and technology organization (RTO) in Iran. Decision-Making Trial and Evaluation Laboratory (DEMATEL) are employed to reflect the interdependencies among BSC perspectives. Then, Analytic Network Process (ANP) is utilized to weight the indices influencing the considered problem. In the next step, we apply four MCDM methods including Additive Ratio Assessment (ARAS), Complex Proportional Assessment (COPRAS), Multi-Objective Optimization by Ratio Analysis (MOORA), and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) for ranking of alternatives. Finally, the utility interval technique is applied to combine the ranking results of MCDM methods. Weighted utility intervals are computed by constructing a correlation matrix between the ranking methods. A real case is presented to show the efficacy of the proposed approach. Copyright © 2016 Elsevier Ltd. All rights reserved.

Refinement of ground reference data with segmented image data

NASA Technical Reports Server (NTRS)

Robinson, Jon W.; Tilton, James C.

1991-01-01

One of the ways to determine ground reference data (GRD) for satellite remote sensing data is to photo-interpret low altitude aerial photographs and then digitize the cover types on a digitized tablet and register them to 7.5 minute U.S.G.S. maps (that were themselves digitized). The resulting GRD can be registered to the satellite image or, vice versa. Unfortunately, there are many opportunities for error when using digitizing tablet and the resolution of the edges for the GRD depends on the spacing of the points selected on the digitizing tablet. One of the consequences of this is that when overlaid on the image, errors and missed detail in the GRD become evident. An approach is discussed for correcting these errors and adding detail to the GRD through the use of a highly interactive, visually oriented process. This process involves the use of overlaid visual displays of the satellite image data, the GRD, and a segmentation of the satellite image data. Several prototype programs were implemented which provide means of taking a segmented image and using the edges from the reference data to mask out these segment edges that are beyond a certain distance from the reference data edges. Then using the reference data edges as a guide, those segment edges that remain and that are judged not to be image versions of the reference edges are manually marked and removed. The prototype programs that were developed and the algorithmic refinements that facilitate execution of this task are described.

Role of G protein-coupled estrogen receptor-1, matrix metalloproteinases 2 and 9, and heparin binding epidermal growth factor-like growth factor in estradiol-17β-stimulated bovine satellite cell proliferation.

PubMed

Kamanga-Sollo, E; Thornton, K J; White, M E; Dayton, W R

2014-10-01

In feedlot steers, estradiol-17β (E2) and combined E2 and trenbolone acetate (a testosterone analog) implants enhance rate and efficiency of muscle growth; and, consequently, these compounds are widely used as growth promoters. Although the positive effects of E2 on rate and efficiency of bovine muscle growth are well established, the mechanisms involved in these effects are not well understood. Combined E2 and trenbolone acetate implants result in significantly increased muscle satellite cell number in feedlot steers. Additionally, E2 treatment stimulates proliferation of cultured bovine satellite cells (BSC). Studies in nonmuscle cells have shown that binding of E2 to G protein-coupled estrogen receptor (GPER)-1 results in activation of matrix metalloproteinases 2 and 9 (MMP2/9) resulting in proteolytic release of heparin binding epidermal growth factor-like growth factor (hbEGF) from the cell surface. Released hbEGF binds to and activates the epidermal growth factor receptor resulting in increased proliferation. To assess if GPER-1, MMP2/9, and/or hbEGF are involved in the mechanism of E2-stimulated BSC proliferation, we have examined the effects of G36 (a specific inhibitor of GPER-1), CRM197 (a specific inhibitor of hbEGF), and MMP-2/MMP-9 Inhibitor II (an inhibitor of MMP2/9 activity) on E2-stimulated BSC proliferation. Inhibition of GPER-1, MMP2/9, or hbEGF suppresses E2-stimulated BSC proliferation (P < 0.001) suggesting that all these are required in order for E2 to stimulate BSC proliferation. These results strongly suggest that E2 may stimulate BSC proliferation by binding to GPER-1 resulting in MMP2/9-catalyzed release of cell membrane-bound hbEGF and subsequent activation of epidermal growth factor receptor by binding of released hbEGF. Copyright © 2014 Elsevier Inc. All rights reserved.

Role of G protein-coupled estrogen receptor-1 in estradiol 17β-induced alterations in protein synthesis and protein degradation rates in fused bovine satellite cell cultures.

PubMed

Kamanga-Sollo, E; Thornton, K J; White, M E; Dayton, W R

2017-01-01

In feedlot steers, estradiol-17β (E2) and combined E2 and trenbolone acetate (a testosterone analog) implants enhance rate and efficiency of muscle growth; and, consequently, these compounds are widely used as growth promoters in several countries. Treatment with E2 stimulates protein synthesis rate and suppresses protein degradation rate in fused bovine satellite cell (BSC) cultures; however, the mechanisms involved in these effects are not known with certainty. Although the genomic effects of E2 mediated through the classical estrogen receptors have been characterized, recent studies indicate that binding of E2 to the G protein-coupled estrogen receptor (GPER)-1 mediates nongenomic effects of E2 on cellular function. Our current data show that inhibition of GPER-1, matrix metalloproteinases 2 and 9 (MMP2/9), or heparin binding epidermal growth factor-like growth factor (hbEGF) suppresses E2 stimulate protein synthesis rate in cultured BSCs (P < 0.001) suggesting that all of these are required in order for E2 to stimulate protein synthesis in these cultures. In contrast, inhibition of GPER-1, MMP2/9, or hbEGF has no effect on the ability of E2 to suppress protein degradation rates in fused BSC cultures indicating that these factors are not required in order for E2 to suppress protein degradation rate in these cells. Furthermore, treatment of fused BSC cultures with E2 increased (P < 0.05) pAKT levels indicating that the pAKT pathway may play a role in E2-stimulated effects on cultured BSC. In summary, our current data show that active GPER-1, MMP2/9, and hbEGF are necessary for E2-stimulated protein synthesis but not for E2-simulated suppression of protein degradation in cultured BSC. In addition, E2 treatment increases pAKT levels in cultured BSC. Copyright © 2016 Elsevier Inc. All rights reserved.

The balanced scorecard framework-a case study of patient and employee satisfaction: what happens when it does not work as planned?

PubMed

Lorden, Andrea; Coustasse, Alberto; Singh, Karan P

2008-01-01

The successful utilization of the balanced scorecard (BSC) framework in health care has been demonstrated in the literature. Given these successes, a financially struggling hospital implemented a BSC framework intervention which attempted a culture change centered upon patient satisfaction which it hoped would translate to improved financial stability. Despite the evidence of BSC successes, the intervention, entitled Route 99, did not succeed in this hospital. This case study was conducted to identify learnable lessons and confounding factors associated with the successes and failures of Route 99. Metrics for patient satisfaction and employee satisfaction were examined as reflections of the intervention, the BSC framework, and the confounding financial condition of the hospital. Through case study methodology, mean quarterly patient satisfaction scores tabulated by an outside vendor for inpatient and outpatient services were divided into four time intervals and compared through analysis of variance. Employee satisfaction was measured through a hospital-provided 12-question employee survey, administered through convenience sampling at the beginning and 7 months into Route 99. Each question utilized a 5-point Likert scale and generated two samples which were verified for sample independence through chi-square analysis. Mann-Whitney U test was used for comparison. Inpatient patient satisfaction scores exhibited a nonsignificant upward trend. However, the analysis of variance demonstrated a significant rise in outpatient patient satisfaction (p < .05). An interesting finding was that employee satisfaction declined (p < .05) significantly for supervisors and directors in three areas. The inverse relationship between patient satisfaction and employee satisfaction is in contrast to that found in the literature by the authors. Examination of the BSC framework, the hospital's financial standing, and the metrics for patient satisfaction and employee satisfaction illuminated the importance of management transparency, leadership support, appropriate metric selection, and the strength of the BSC under turbulent circumstances.

Advanced CD-SEM solution for edge placement error characterization of BEOL pitch 32nm metal layers

NASA Astrophysics Data System (ADS)

Charley, A.; Leray, P.; Lorusso, G.; Sutani, T.; Takemasa, Y.

2018-03-01

Metrology plays an important role in edge placement error (EPE) budgeting. Control for multi-patterning applications as new critical distances needs to be measured (edge to edge) and requirements become tighter and tighter in terms of accuracy and precision. In this paper we focus on imec iN7 BEOL platform and particularly on M2 patterning scheme using SAQP + block EUV for a 7.5 track logic design. Being able to characterize block to SAQP edge misplacement is important in a budgeting exercise (1) but is also extremely difficult due to challenging edge detection with CD-SEM (similar materials, thin layers, short distances, 3D features). In this study we develop an advanced solution to measure block to SAQP placement, we characterize it in terms of sensitivity, precision and accuracy through the comparison to reference metrology. In a second phase, the methodology is applied to budget local effects and the results are compared to the characterization of the SAQP and block independently.

Experimental investigation of the early interaction between cyanobacterial soil crusts and vascular plants

NASA Astrophysics Data System (ADS)

Klemens Zaplata, Markus; Veste, Maik; Pohle, Ina; Schümberg, Sabine; Abreu Schonert, Iballa; Hinz, Christoph

2016-04-01

While there are hints that biological soil crusts (BSCs) can constitute physical barriers for the emergence of vascular plants, a conceptual approach for the quantitative evaluation of these effects is still missing. Here we present an experimental design to test the emergence of seedlings in situ with (i) capping natural intact, (ii) destroyed and (iii) removed BSC. The selected field site is directly adjacent to the constructed Hühnerwasser catchment (Lusatia, Germany). This site exists since the end of 2008 and consists of loamy sand. Serving as proxy for seedling thrust, we inserted pre-germinated seeds of three confamiliar plant species with different seed masses (members of the Fabaceae family: Lotus corniculatus L., Ornithopus sativus Brot., and Glycine max (L.) Merr.). In each treatment as well as in the control group planting depths were 10 mm. We took care that experimental plots had identical crust thickness, slightly less than 4 mm, serving as proxy for mechanical resistance. A plot became established as follows: Firstly, the pristine crusted surface was vertically cut. To the windward side the BSC remained intact (i: "with BSC" stripe). To the downwind side soil material was temporarily excavated for laterally inserting the seeds beneath the surface of the first stripe. Then at the thereby disturbed second stripe pulverised BSC material became filled as a top layer (ii: "BSC mix" stripe). From the next stripe the BSC was removed (iii: "no BSC" stripe). Thus each plot had each experimental group in spatial contiguity (within 50 cm × 50 cm). The overall 50 plots were distributed across an area of 40 m × 12 m. When individuals of a species either emerged at all stripes, "× × ×", or at no stripe of a plot, "- - -", there was no reason to suppose any effect of a crust. The "- × ×" emergence pattern (depicting the appearance of seedlings in both stripes possessing manipulated surfaces) points towards hindrance more clearly than "- × -" or "- - ×". Altogether eight possible combinations exist. Combinatorial analysis turned out that seedling emergence had been notably impeded for light-weighted seeds but little for heavy seeds. Repeated recordings enable to account for adaptable emergence of seedlings according to varying crust conditions - in spatial as well as temporal terms. The proposed experimental procedure hence is highly recommended as a viable instrument to further investigate filter and facilitation processes between BSCs and vascular plants.

Petrology of the Basalt of Summit Creek: A [Slab] Window into Pacific Northwest Tectonics during the Eocene

NASA Astrophysics Data System (ADS)

Kant, L. B.; Tepper, J. H.; Nelson, B. K.

2012-12-01

Variation in composition of basalts within the Cascade arc reflects the regional effects of subducting slab windows. The earliest preserved Tertiary manifestation of this process is the 55-44 Ma Basalt of Summit Creek (BSC), located southeast of Mount Rainier. At the base of this steeply dipping 2000 m section of subaerial lavas are basalts / diabases with arc traits (e.g., HFSE depletions, 1.0-1.2 wt. % K2O) and isotopic compositions (207Pb/204Pb > 15.58; ɛNd = +5.8 to +6.7) that overlap those of modern Cascade arc rocks. Conformably overlying these arc rocks (and separated by ~35m of shale, sandstone and conglomerate) are tholeiitic basalts with OIB affinities (<0.4 wt. % K2O, Y/Nb = 1.1-2.3, concave spidergram profiles) and isotopic signatures of a more depleted mantle source (207Pb/204Pb < 15.56; ɛNd = +7.1 to +7.8). In major element, trace element, and isotopic composition the upper BSC lavas are broadly similar to the voluminous Crescent Formation basalts on the Olympic Peninsula, which are coeval with the BSC but located ~100 km farther west. Compositional diversity within the upper BSC section (Mg# 66-30) appears to reflect both fractional crystallization and source heterogeneity. Modeling with MELTS (Ghiroso and Sack, 1995) indicates that differentiation dominated by removal of clinopyroxene and plagioclase took place at mid crustal depths (P = 5 kbar) and that the parent magma had <0.2 wt. % water. However, this process cannot account for all incompatible element data, which indicate the existence of two distinct magma series that differ most notably in Sr, Zr, and K2O contents. Arc basalts of the lower BSC may represent the southernmost extension of the Cretaceous-Tertiary North Cascades arc (Miller et al., 2009); however, basalts higher in the section have OIB traits and reflect a different tectonic setting. We propose that the transition from arc to OIB magmatism in the BSC records the arrival beneath the arc of a slab window produced by subduction of the Kula-Farallon Ridge (KFR). Previous research on subduction of the KFR has been limited to the coast. Improved dating and petrology of the BSC will help to better constrain the location and behavior of the KFR slab window as it moved further inboard beneath the North American plate.

Performance evaluation of Al-Zahra academic medical center based on Iran balanced scorecard model

PubMed Central

Raeisi, Ahmad Reza; Yarmohammadian, Mohammad Hossein; Bakhsh, Roghayeh Mohammadi; Gangi, Hamid

2012-01-01

Background: Growth and development in any country's national health system, without an efficient evaluation system, lacks the basic concepts and tools necessary for fulfilling the system's goals. The balanced scorecard (BSC) is a technique widely used to measure the performance of an organization. The basic core of the BSC is guided by the organization's vision and strategies, which are the bases for the formation of four perspectives of BSC. The goal of this research is the performance evaluation of Al-Zahra Academic Medical Center in Isfahan University of Medical Sciences, based on Iran BSC model. Materials and Methods: This is a combination (quantitative–qualitative) research which was done at Al-Zahra Academic Medical Center in Isfahan University of Medical Sciences in 2011. The research populations were hospital managers at different levels. Sampling method was purposive sampling in which the key informed personnel participated in determining the performance indicators of hospital as the BSC team members in focused discussion groups. After determining the conceptual elements in focused discussion groups, the performance objectives (targets) and indicators of hospital were determined and sorted in perspectives by the group discussion participants. Following that, the performance indicators were calculated by the experts according to the predetermined objectives; then, the score of each indicator and the mean score of each perspective were calculated. Results: Research findings included development of the organizational mission, vision, values, objectives, and strategies. The strategies agreed upon by the participants in the focus discussion group included five strategies, which were customer satisfaction, continuous quality improvement, development of human resources, supporting innovation, expansion of services and improving the productivity. Research participants also agreed upon four perspectives for the Al-Zahra hospital BSC. In the patients and community perspective (customer), two objectives and three indicators were agreed upon, with a mean score of 75.9%. In the internal process perspective, 4 objectives and 14 indicators were agreed upon, with a mean score of 79.37%. In the learning and growth perspective, four objectives and eight indicators were agreed upon, with a mean score of 81.11%. Finally, in the financial perspective, two objectives and five indicators were agreed upon, with a mean score of 67.15%. Conclusion: One way to create demand for hospital services is performance evaluation by paying close attention to all BSC perspectives, especially the non-financial perspectives such as customers and internal processes perspectives. In this study, the BSC showed the differences in performance level of the organization in different perspectives, which would assist the hospital managers improve their performance indicators. The learning and growth perspective obtained the highest score, and the financial perspective obtained the least score. Since the learning and growth perspective acts as a base for all other perspectives and they depend on it, hospitals must continuously improve the service processes and the quality of services by educating staff and updating their policies and procedures. This can increase customer satisfaction and productivity and finally improve the BSC in financial perspective. PMID:23555104

Cost Effectiveness Analysis of Different Management Strategies between Best Supportive Care and Second-line Chemotherapy for Platinum-resistant or Refractory Ovarian Cancer.

PubMed

Luealon, Phanida; Khempech, Nipon; Vasuratna, Apichai; Hanvoravongchai, Piya; Havanond, Piyalamporn

2016-01-01

There is no standard treatment for patients with platinum-resistant or refractory epithelial ovarian cancer. Single agent chemotherapies have evidence of more efficacy and less toxicity than combination therapy. Most are very expensive, with appreciable toxicity and minimal survival. Since it is difficult to make comparison between outcomes, economic analysis of single-agent chemotherapy regimens and best supportive care may help to make decisions about an appropriate management for the affected patients. To evaluate the cost effectiveness of second-line chemotherapy compared with best supportive care for patients with platinum-resistant or refractory epithelial ovarian cancer. A Markov model was used to estimate the effectiveness and total costs associated with treatments. The hypothetical patient population comprised women aged 55 with platinum-resistant or refractory epithelial ovarian cancer. Four types of alternative treatment options were evaluated: 1) gemcitabine followed by BSC; 2) pegylated liposomal doxorubicin (PLD) followed by BSC; 3) gemcitabine followed by topotecan; and 4) PLD followed by topotecan. Baseline comparator of alternative treatments was BSC. Time horizon of the analysis was 2 years. Health care provider perspective and 3% discount rate were used to determine the costs of medical treatment in this study. Quality-adjusted life-years (QALY) were used to measure the treatment effectiveness. Treatment effectiveness data were derived from the literature. Costs were calculated from unit cost treatment of epithelial ovarian cancer patients at various stages of disease in King Chulalongkorn Memorial Hospital (KCMH) in the year 2011. Parameter uncertainty was tested in probabilistic sensitivity analysis by using Monte Carlo simulation. One-way sensitivity analysis was used to explore each variable's impact on the uncertainty of the results. Approximated life expectancy of best supportive care was 0.182 years and its total cost was 26,862 Baht. All four alternative treatments increased life expectancy. Life expectancy of gemcitabine followed by BSC, PLD followed by BSC, gemcitabine followed by topotecan and PLD followed by topotecan was 0.510, 0.513, 0.566, and 0.570 years, respectively. The total cost of gemcitabine followed by BSC, PLD followed by BSC, gemcitabine followed by topotecan and PLD followed by topotecan was 113,000, 124,302, 139,788 and 151,135 Baht, respectively. PLD followed by topotecan had the highest expected quality-adjusted life-years but was the most expensive of all the above strategies. The incremental cost-effectiveness ratios (ICER) of gemcitabine followed by BSC, PLD followed by BSC, gemcitabine followed by topotecan and PLD followed by topotecan was 344,643, 385,322, 385,856, and 420,299 Baht, respectively. All of the second-line chemotherapy strategies showed certain benefits due to an increased life- year gained compared with best supportive care. Moreover, gemcitabine as second-line chemotherapy followed by best supportive care in progressive disease case was likely to be more effective strategy with less cost from health care provider perspective. Gemcitabine was the most cost-effective treatment among all four alternative treatments. ICER is only an economic factor. Treatment decisions should be based on the patient benefit.

Responsive BScN Programming at Nipissing University: The Continuing Education of Ontario Nurses

ERIC Educational Resources Information Center

Fitzgerald, Scott; Beattie, Beverley; Carter, Lorraine; Caswell, Wenda

2014-01-01

Nipissing University in North Bay, Ontario, is currently the only post-secondary institution in that province to offer a part-time Baccalaureate of Science in Nursing (BScN) program for Registered Practical Nurses (RPNs) through a blended learning model. This program represents a "bridge" from the nurse's college diploma and offers a…

Entrance Qualifications Affect the Performance of Nutrition Students at University: A Pilot Study

ERIC Educational Resources Information Center

Owusu-Apenten, Richard; Xu, Wen Li

2012-01-01

This study assessed the effect of admissions qualifications on the subsequent academic performances of BSc nutrition students at a UK university. Entrance qualifications for three groups (Grp01, Grp02, Grp03) reading for a BSc(Hons) degree in, Dietetics, Food & Nutrition or Human Nutrition (n = 105) were determined from their UCAS…

Balanced Scorecards in Managing Higher Education Institutions: An Indian Perspective

ERIC Educational Resources Information Center

Umashankar, Venkatesh; Dutta, Kirti

2007-01-01

Purpose: The paper aims to look at the balanced scorecard (BSC) concept and discuss in what way it should be applied to higher education programs/institutions in the Indian context. Design/methodology/approach: The paper is based on extant literature on the balanced scorecard concept per se, as well as applications of BSC in higher education as…

Introducing the Balanced Scorecard: Creating Metrics to Measure Performance

ERIC Educational Resources Information Center

Gumbus, Andra

2005-01-01

This experiential exercise presents the concept of the Balanced Scorecard (BSC) and applies it in a university setting. The Balanced Scorecard was developed 12 years ago and has grown in popularity and is used by more than 50% of the Fortune 500 companies as a performance measurement and strategic management tool. The BSC expands the traditional…

Basic Skill Centers Evaluation, September, 1969 - June, 1971.

ERIC Educational Resources Information Center

Clark, Sara Page

The Basic Skill Centers (BSC) program was developed to help students, primarily from the inner-city Target Area schools of Minneapolis, learn to read. The BSC approach was remedial, and each year more than 700 students, the majority in grades four through six, participated in the program. In 1969-70 the Talking Typewriter was one major aspect of…

78 FR 29754 - Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-21

... mild-Traumatic Injury Workgroup. There will be 15 minutes allotted for public comments at the end of... Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC) In accordance with...-being; and (3) conduct and assist in research and control activities related to injury. The Board of...

Two-dimensional straightness measurement based on optical knife-edge sensing

NASA Astrophysics Data System (ADS)

Wang, Chen; Zhong, Fenghe; Ellis, Jonathan D.

2017-09-01

Straightness error is a parasitic translation along a perpendicular direction to the primary displacement axis of a linear stage. The parasitic translations could be coupled into other primary displacement directions of a multi-axis platform. Hence, its measurement and compensation are critical in precision multi-axis metrology, calibration, and manufacturing. This paper presents a two-dimensional (2D) straightness measurement configuration based on 2D optical knife-edge sensing, which is simple, light-weight, compact, and easy to align. It applies a 2D optical knife-edge to manipulate the diffraction pattern sensed by a quadrant photodetector, whose output voltages could derive 2D straightness errors after a calibration process. This paper analyzes the physical model of the configuration and performs simulations and experiments to study the system sensitivity, measurement nonlinearity, and error sources. The results demonstrate that the proposed configuration has higher sensitivity and insensitive to beam's vibration, compared with the conventional configurations without using the knife-edge, and could achieve ±0.25 μ m within a ±40 μ m measurement range along a 40 mm primary axial motion.

75 FR 1062 - Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-08

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC) In accordance with Section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC) announces, the followin...

Characterize Eruptive Processes at Yucca Mountain, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. Krier

2004-10-04

The purpose of this scientific analysis report, ''Characterize Eruptive Processes at Yucca Mountain, Nevada'', is to present information about natural volcanic systems and the parameters that can be used to model their behavior. This information is used to develop parameter-value distributions appropriate for analysis of the consequences of volcanic eruptions through a repository at Yucca Mountain. This scientific analysis report provides information to four other reports: ''Number of Waste Packages Hit by Igneous Intrusion'', (BSC 2004 [DIRS 170001]); ''Atmospheric Dispersal and Deposition of Tephra from Potential Volcanic Eruption at Yucca Mountain, Nevada'' (BSC 2004 [DIRS 170026]); ''Dike/Drift Interactions'' (BSC 2004more » [DIRS 170028]); ''Development of Earthquake Ground Motion Input for Preclosure Seismic Design and Postclosure Performance Assessment of a Geologic Repository at Yucca Mountain, NV'' (BSC 2004 [DIRS 170027], Section 6.5). This report is organized into seven major sections. This section addresses the purpose of this document. Section 2 addresses quality assurance, Section 3 the use of software, Section 4 identifies the requirements that constrain this work, and Section 5 lists assumptions and their rationale. Section 6 presents the details of the scientific analysis and Section 7 summarizes the conclusions reached.« less

Estimation of polydispersity in aggregating red blood cells by quantitative ultrasound backscatter analysis.

PubMed

de Monchy, Romain; Rouyer, Julien; Destrempes, François; Chayer, Boris; Cloutier, Guy; Franceschini, Emilie

2018-04-01

Quantitative ultrasound techniques based on the backscatter coefficient (BSC) have been commonly used to characterize red blood cell (RBC) aggregation. Specifically, a scattering model is fitted to measured BSC and estimated parameters can provide a meaningful description of the RBC aggregates' structure (i.e., aggregate size and compactness). In most cases, scattering models assumed monodisperse RBC aggregates. This study proposes the Effective Medium Theory combined with the polydisperse Structure Factor Model (EMTSFM) to incorporate the polydispersity of aggregate size. From the measured BSC, this model allows estimating three structural parameters: the mean radius of the aggregate size distribution, the width of the distribution, and the compactness of the aggregates. Two successive experiments were conducted: a first experiment on blood sheared in a Couette flow device coupled with an ultrasonic probe, and a second experiment, on the same blood sample, sheared in a plane-plane rheometer coupled to a light microscope. Results demonstrated that the polydisperse EMTSFM provided the best fit to the BSC data when compared to the classical monodisperse models for the higher levels of aggregation at hematocrits between 10% and 40%. Fitting the polydisperse model yielded aggregate size distributions that were consistent with direct light microscope observations at low hematocrits.

Balanced scorecard: application in the General Panarcadian Hospital of Tripolis, Greece.

PubMed

Koumpouros, Yiannis

2013-01-01

The purpose of this paper is to discuss the application of the balanced scorecard (BSC) in the Greek public health sector. The basic balanced scorecard theory has been adopted in the characteristics and individualities of the Greek public health system. The theoretical model developed was applied in the General Panarcadian Hospital of Tripolis (GPHT) in Greece. GPHT is a representative paradigm of a big regional Greek public hospital. It has about 300 beds and many clinics and specialties (internal medicine, cardiology, general surgery, intensive care unit, artificial kidney unit, etc.). Strategic management was performed for almost three years. The BSC model was formulated in an appropriate software program. The problems (both technical and managerial) faced during a three-year period along with the results of this management approach are presented in the current paper. The paper highlights some important gaps in the Greek public health system, while proposing actions to be taken. The BSC theory can be very successful under certain conditions. Special attention is given to the peculiarities of the Greek public health situation. The paper presents for the first time a real life example of applying BSC in the Greek public health sector.

DNA methylation analysis from saliva samples for epidemiological studies.

PubMed

Nishitani, Shota; Parets, Sasha E; Haas, Brian W; Smith, Alicia K

2018-06-18

Saliva is a non-invasive, easily accessible tissue, which is regularly collected in large epidemiological studies to examine genetic questions. Recently, it is becoming more common to use saliva to assess DNA methylation. However, DNA extracted from saliva is a mixture of both bacterial and human DNA derived from epithelial and immune cells in the mouth. Thus, there are unique challenges to using salivary DNA in methylation studies that can influence data quality. This study assesses: (1) quantification of human DNA after extraction; (2) delineation of human and bacterial DNA; (3) bisulfite conversion (BSC); (4) quantification of BSC DNA; (5) PCR amplification of BSC DNA from saliva and; (6) quantitation of DNA methylation with a targeted assay. The framework proposed will allow saliva samples to be more widely used in targeted epigenetic studies.

Role of G protein-coupled receptors (GPCR), matrix metalloproteinases 2 and 9 (MMP2 and MMP9), heparin-binding epidermal growth factor-like growth factor (hbEGF), epidermal growth factor receptor (EGFR), erbB2, and insulin-like growth factor 1 receptor (IGF-1R) in trenbolone acetate-stimulated bovine satellite cell proliferation.

PubMed

Thornton, K J; Kamange-Sollo, E; White, M E; Dayton, W R

2015-09-01

Implanting cattle with steroids significantly enhances feed efficiency, rate of gain, and muscle growth. However, the mechanisms responsible for these improvements in muscle growth have not been fully elucidated. Trenbolone acetate (TBA), a testosterone analog, has been shown to increase proliferation rate in bovine satellite cell (BSC) cultures. The classical genomic actions of testosterone have been well characterized; however, our results indicate that TBA may also initiate a quicker, nongenomic response that involves activation of G protein-coupled receptors (GPCR) resulting in activation of matrix metalloproteinases 2 and 9 (MMP2 and MMP9) that release membrane-bound heparin-binding epidermal growth factor-like growth factor (hbEGF), which then binds to and activates the epidermal growth factor receptor (EGFR) and/or erbB2. Furthermore, the EGFR has been shown to regulate expression of the IGF-1 receptor (IGF-1R), which is well known for its role in modulating muscle growth. To determine whether this nongenomic pathway is potentially involved in TBA-stimulated BSC proliferation, we analyzed the effects of treating BSC with guanosine 5'-O-2-thiodiphosphate (GDPβS), an inhibitor of all GPCR; a MMP2 and MMP9 inhibitor (MMPI); CRM19, a specific inhibitor of hbEGF; AG1478, a specific EGFR tyrosine kinase inhibitor; AG879, a specific erbB2 kinase inhibitor; and AG1024, an IGF-1R tyrosine kinase inhibitor on TBA-stimulated proliferation rate (H-thymidine incorporation). Assays were replicated at least 9 times for each inhibitor experiment using BSC cultures obtained from at least 3 different animals. Bovine satellite cell cultures were obtained from yearling steers that had no previous exposure to androgenic or estrogenic compounds. As expected, BSC cultures treated with 10 n TBA showed ( < 0.05) increased proliferation rate when compared with control cultures. Additionally, treatment with 5 ng hbEGF/mL stimulated proliferation in BSC cultures ( < 0.05). Treatment with GDPβS, MMPI, CRM197, AG1024, AG1478, and/or AG879 all suppressed ( < 0.05) TBA-induced increases in proliferation. These data indicate that TBA likely initiates a nongenomic response involving GPCR, MMP2 and MMP9, hbEGF, EGFR, erbB2, and IGF-1R, which may play a role in TBA-mediated increases in BSC proliferation.

Changes in BSc Business Administration and Psychology Students' Learning Styles over One, Two and Three Years of Study

ERIC Educational Resources Information Center

Nielsen, Tine

2013-01-01

Knowledge on general or discipline-specific changes in the learning styles of university students can be utilised in the design and execution of courses, but little is known of such changes. The study examined the changes in the learning styles of three year groups of BSc Business Administration and Psychology students from admittance to one, two…

Establishing Information Security Systems via Optical Imaging

DTIC Science & Technology

2015-08-11

SLM, spatial light modulator; BSC, non - polarizing beam splitter cube; CCD, charge-coupled device. In computational ghost imaging, a series of...Laser Object Computer Fig. 5. A schematic setup for the proposed method using holography: BSC, Beam splitter cube; CCD, Charge-coupled device. The...interference between reference and object beams . (a) (e) (d) (c) (b) Distribution Code A: Approved for public release, distribution is unlimited

Prevalence of obesity in the equine population of Saskatoon and surrounding area.

PubMed

Kosolofski, Hayley R; Gow, Sheryl P; Robinson, Katherine A

2017-09-01

A retrospective study determined the prevalence of obesity and over-conditioning in horses in Saskatoon, Saskatchewan. Body condition score (BSC) was assessed for 290 horses from the Field Service practice at the Western College of Veterinary Medicine. The median BSC of horses was 6; however, 59 (20.3%) horses were classified as over-conditioned, and 24 (8.3%) as obese.

News from the Biological Stain Commission No. 5.

PubMed

Lyon, H O; Dapson, R W

2009-06-01

In this fifth issue of News from the Biological Stain Commission (BSC), under the heading of Regulatory Affairs, the BSC's International Affairs Committee provides more information from the meeting of the International Standards Organization ISO/TC 212 Committee that took place on June 2-4, 2008 at Vancouver, Canada. In addition, we give an update on the current situation regarding the supplies of hematoxylin.

Active Engagement with Assessment and Feedback Can Improve Group-Work Outcomes and Boost Student Confidence

ERIC Educational Resources Information Center

Scott, G. W.

2017-01-01

This study involves evaluation of a novel iterative group-based learning task developed to enable students to actively engage with assessment and feedback in order to improve the quality of their written work. The students were all in the final semester of their final year of study and enrolled on either BSc Zoology or BSc Marine and Freshwater…

[Balanced Scorecard--a business tool for profit calculations--usable in gynecology and obstetrics?].

PubMed

Goerke, K

2001-08-01

The balanced scorecard (BSC) is an instrument of business administration using score numbers, that not only includes financial aspects but also levels of communication, motivation and customer relations. Thus it seems usable in service oriented companies including hospitals. The next years will have to show, whether the results rectify the immense expenses necessary with the implementation of the BSC.

Final Analysis of Outcomes and RAS/BRAF Status in a Randomized Phase 3 Study of Panitumumab and Best Supportive Care in Chemorefractory Wild Type KRAS Metastatic Colorectal Cancer.

PubMed

Kim, Tae Won; Elme, Anneli; Park, Joon Oh; Udrea, Anghel Adrian; Kim, Sun Young; Ahn, Joong Bae; Valencia, Ricardo Villalobos; Krishnan, Srinivasan; Manojlovic, Nebojsa; Guan, Xuesong; Lofton-Day, Catherine; Jung, A Scott; Vrdoljak, Eduard

2018-03-21

Tumor rat sarcoma gene (RAS) status is a negative predictive biomarker for anti-epidermal growth factor receptor (EGFR) therapy in metastatic colorectal cancer (mCRC). We analyzed outcomes according to RAS and v-Raf murine sarcoma viral oncogene homolog B (BRAF) mutational status, and evaluated early tumor shrinkage (ETS) and depth of response (DpR) for patients with wild type RAS. Patients with confirmed metastatic colon or rectum adenocarcinoma, wild type Kristen rat sarcoma gene tumor exon 2 status, clinical/radiologic disease progression or toxicity during irinotecan or oxaliplatin treatment, and no previous anti-EGFR therapy were randomized 1:1 to receive best supportive care (BSC) with or without panitumumab (6.0 mg/kg, intravenously, on day 1 of each 14-day cycle) in this open-label, multicenter, phase III study (20100007). RAS and BRAF mutation status were determined using Sanger sequencing. ETS was evaluated as maximum percentage change from baseline to week 8; DpR was calculated as the percentage change for tumor shrinkage at nadir versus baseline. Overall, 270 patients had RAS wild type mCRC (panitumumab with BSC, n = 142; BSC, n = 128). For patients with wild type RAS tumors, median overall survival (OS; hazard ratio [HR], 0.72; P = .015) and progression-free survival (PFS; HR, 0.45; P < .0001) were improved with panitumumab with BSC versus BSC. Similar improvements were seen for patients with wild type RAS, and wild type BRAF tumors (OS: HR, 0.75; P = .04; PFS: HR, 0.45; P < .0001). Median DpR was 16.9% for the evaluable panitumumab with BSC wild type RAS population. Overall, 69.5% experienced any type of tumor shrinkage at week 8; 38.2% experienced ≥ 20% shrinkage. Similar improvements in OS and PFS were seen with stratification according to ETS. This analysis showed that panitumumab improved outcomes in wild type RAS mCRC and indicated that ETS and DpR could be used as additional efficacy markers. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

The role of non-rainfall water on physiological activation in desert biological soil crusts

NASA Astrophysics Data System (ADS)

Zheng, Jiaoli; Peng, Chengrong; Li, Hua; Li, Shuangshuang; Huang, Shun; Hu, Yao; Zhang, Jinli; Li, Dunhai

2018-01-01

Non-rainfall water (NRW, e.g. fog and dew), in addition to rainfall and snowfall, are considered important water inputs to drylands. At the same time, biological soil crusts (BSCs) are important components of drylands. However, little information is available regarding the effect of NRW inputs on BSC activation. In this study, the effects of NRW on physiological activation in three BSC successional stages, including the cyanobacteria crust stage (Crust-C), moss colonization stage (Crust-CM), and moss crust stage (Crust-M), were studied in situ. Results suggest NRW inputs hydrated and activated physiological activity (Fv/Fm, carbon exchange, and nitrogen fixation) in BSCs but led to a negative carbon balance and low rates of nitrogen fixation in BSCs. One effective NRW event could hydrate BSCs for 7 h. Following simulated rainfall, the physiological activities recovered within 3 h, and net carbon gain occurred until 3 h after hydration, whereas NRW-induced physiological recovery processes were slower and exhibited lower activities, leading to a negative carbon balance. There were significant positive correlations between NRW amounts and the recovered values of Fv/Fm in all the three BSC stages (p < .001). The thresholds for Fv/Fm activation decreased with BSC succession, and the annual effective NRW events increased with BSC succession, with values of 29.8, 89.2, and 110.7 in Crust-C, Crust-CM and Crust-M, respectively. The results suggest that moss crust and moss-cyanobacteria crust use NRW to prolong metabolic activity and reduce drought stress more efficiently than cyanobacteria crusts. Therefore, these results suggest that BSCs utilize NRW to sustain life while growth and biomass accumulation require precipitation (rainfall) events over a certain threshold.

Comparison of broad-spectrum cephalosporin-resistant Escherichia coli isolated from dogs and humans in Hokkaido, Japan.

PubMed

Okubo, Torahiko; Sato, Toyotaka; Yokota, Shin-ichi; Usui, Masaru; Tamura, Yutaka

2014-04-01

Resistance to broad-spectrum cephalosporins (BSCs) in Enterobacteriaceae in companion animals has become a great concern for public health. To estimate the dissemination of BSC-resistant bacteria between dog and human, we examined the BSC-resistance determinants of and genetic similarities between 69 BSC-resistant Escherichia coli isolates derived from canine rectal swabs (n = 28) and human clinical samples (n = 41). Some E. coli isolates possessed blaTEM-1b (14 canine and 16 human isolates), blaCTx-M-2 (6 human isolates), blaCTx-M-14 (3 canine and 14 human isolates), blaCTx-M-27 (1 canine and 15 human isolates), and blaCMY-2 (11 canine and 3 human isolates). The possession of CTX-M-type β-lactamases was significantly more frequent in human isolates, whereas CMY-2 was more common in canine isolates. Bacterial typing methods (phylogenetic typing, O-antigen serotyping, and pulsed-field gel electrophoresis) showed little clonal relationship between canine isolates and human isolates. Plasmid analysis and Southern blotting indicated that the plasmids encoding CMY-2 were similar among canine and human isolates. Based on the differences in the major β-lactamase and the divergence of bacterial types between canine and human isolates, it seems that clonal dissemination of BSC-resistant E. coli between canines and humans is limited. The similarity of the CMY-2-encoding plasmid suggests that plasmid-mediated β-lactamase gene transmission plays a role in interspecies diffusion of BSC-resistant E. coli between dog and human. Copyright © 2013 Japanese Society of Chemotherapy and The Japanese Association for Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

Application and verification of the NMMB/BSC-CTM forecast for solar energy

NASA Astrophysics Data System (ADS)

Soret, Albert; Serradell, Kim; Piot, Matthias; Ortega, Daniel; Obiso, Vincenzo; Jorba, Oriol

2016-04-01

In the beginning of April 2014, northern Europe was affected by a mineral dust intrusion. On 4 April 2014, the power prediction for German solar installations was estimated as 21 GW, whereas the measured power production merely reached 11 GW. This strong overestimation significantly affected the hourly price in the wholesale electricity market: prices were firstly assessed at around 27 € /MWh but rapidly reached a level close to 150 € /MWh after recognizing the lack of solar output. It has been found that a large proportion of the uncertainty of existing NWP models can be attributed to the lack of accurate aerosol data used in order to model solar radiation. Despite the advancements in the modelling of aerosol-cloud interactions, current meteorological models use parameterizations made mostly for climate considerations (generally monthly-based). In this contribution, we analyse model results of the direct radiative effect of mineral dust over Germany at the beginning of April 2014. For that, the NMMB/BSC Chemical Transport Model (NMMB/BSC-CTM) is applied on a regional domain at 0.1° horizontal resolution. The NMMB/BSC-CTM is a new on-line chemical weather prediction system coupling atmospheric and chemistry processes. In the radiation module of the model, mineral dust is treated as a radiatively active substance interacting both short and longwave radiation. The impact of the mineral dust outbreaks on meteorology is discussed by comparing model forecasts meteorological observations. The analysis focuses on the performance of the NMMB/BSC-CTM to simulate the radiative effects of a mineral dust intrusion far from source regions. Model results would help to illustrate the added value of on-line models for long term analysis of solar resource. On-going developments: integration of anthropogenic sources and implementation of indirect radiative effects will be also presented.

Concepts and definitions for "supportive care," "best supportive care," "palliative care," and "hospice care" in the published literature, dictionaries, and textbooks.

PubMed

Hui, David; De La Cruz, Maxine; Mori, Masanori; Parsons, Henrique A; Kwon, Jung Hye; Torres-Vigil, Isabel; Kim, Sun Hyun; Dev, Rony; Hutchins, Ronald; Liem, Christiana; Kang, Duck-Hee; Bruera, Eduardo

2013-03-01

Commonly used terms such as "supportive care," "best supportive care," "palliative care," and "hospice care" were rarely and inconsistently defined in the palliative oncology literature. We conducted a systematic review of the literature to further identify concepts and definitions for these terms. We searched MEDLINE, PsycInfo, EMBASE, and CINAHL for published peer-reviewed articles from 1948 to 2011 that conceptualized, defined, or examined these terms. Two researchers independently reviewed each citation for inclusion and then extracted the concepts/definitions when available. Dictionaries/textbooks were also searched. Nine of 32 "SC/BSC," 25 of 182 "PC," and 12 of 42 "HC" articles focused on providing a conceptual framework/definition. Common concepts for all three terms were symptom control and quality-of-life for patients with life-limiting illness. "SC" focused more on patients on active treatment compared to other categories (9/9 vs. 8/37) and less often involved interdisciplinary care (4/9 vs. 31/37). In contrast, "HC" focused more on volunteers (6/12 vs. 6/34), bereavement care (9/12 vs. 7/34), and community care (9/12 vs. 6/34). Both "PC" and "SC/BSC" were applicable earlier in the disease trajectory (16/34 vs. 0/9). We found 13, 24, and 17 different definitions for "SC/BSC," "PC," and "HC," respectively. "SC/BSC" was the most variably defined, ranging from symptom management during cancer therapy to survivorship care. Dictionaries/textbooks showed similar findings. We identified defining concepts for "SC/BSC," "PC," and "HC" and developed a preliminary conceptual framework unifying these terms along the continuum of care to help build consensus toward standardized definitions.

[Investigating phonological planning processes in speech production through a speech-error induction technique].

PubMed

Nakayama, Masataka; Saito, Satoru

2015-08-01

The present study investigated principles of phonological planning, a common serial ordering mechanism for speech production and phonological short-term memory. Nakayama and Saito (2014) have investigated the principles by using a speech-error induction technique, in which participants were exposed to an auditory distracIor word immediately before an utterance of a target word. They demonstrated within-word adjacent mora exchanges and serial position effects on error rates. These findings support, respectively, the temporal distance and the edge principles at a within-word level. As this previous study induced errors using word distractors created by exchanging adjacent morae in the target words, it is possible that the speech errors are expressions of lexical intrusions reflecting interactive activation of phonological and lexical/semantic representations. To eliminate this possibility, the present study used nonword distractors that had no lexical or semantic representations. This approach successfully replicated the error patterns identified in the abovementioned study, further confirming that the temporal distance and edge principles are organizing precepts in phonological planning.

Adapting the balanced scorecard for mental health and addictions: an inpatient example.

PubMed

Lin, Elizabeth; Durbin, Janet

2008-05-01

The Balanced Scorecard (BSC) is a performance-monitoring framework that originated in the business sector but has more recently been applied to health services. The province of Ontario is using the BSC approach to monitor quality of inpatient care in five service areas. Feasibility of the scorecard framework for each area has been assessed using a standard approach. This paper reports results of the feasibility study for the mental health sector, focusing on three issues: framework relevance, underlying strategic goals and indicator selection. Based on a literature review and extensive stakeholder input, the BSC quadrant structure was recommended with some modifications, and indicators were selected that aligned with provincial mental health reform policy goals. The mental health report has completed two cycles of reporting, and has received good support from the field. Copyright © 2008 Longwoods Publishing.

Using path analysis to examine causal relationships among balanced scorecard performance indicators for general hospitals: the case of a public hospital system in Taiwan.

PubMed

Yang, Ming-Chin; Tung, Yu-Chi

2006-01-01

Examining whether the causal relationships among the performance indicators of the balanced scorecard (BSC) framework exist in hospitals is the aim of this article. Data were collected from all twenty-one general hospitals in a public hospital system and their supervising agency for the 3-year period, 2000-2002. The results of the path analyses identified significant causal relationships among four perspectives in the BSC model. We also verified the relationships among indicators within each perspective, some of which varied as time changed. We conclude that hospital administrators can use path analysis to help them identify and manage leading indicators when adopting the BSC model. However, they should also validate causal relationships between leading and lagging indicators periodically because the management environment changes constantly.

Mechanical Safety Subcommittee Guideline for Design of Thin Windows Regarding Roark’s Edge Condition Coefficient

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ader, C.; Voirin, E.; McGee, M.

An error was found in an edge stress coefficient used to calculate stresses in thin windows. This error is present in “Roark’s Formulas for Stress and Strain” 7th and 8th Edition. The 6th Edition is correct. This guideline specially discusses a major difference in regards to a coefficient used in calculating the edge stress in “Roark’s Formulas for Stress and Strain” 6th Edition compared to the 7th and 8th Editions. In Chapter 10: Flat Plates under “Circular plates under distributed load producing large deflections,” Case 3, which is “Fixed and held. Uniform pressure q over entire plate.” The coefficient formore » a fixed edge condition in the 6th Edition1 K4 = 0.476 while in the 7th and 8th Edition2, the coefficient is 1.73 which is significant difference.« less

Laser Induced Patterning of Transparent Ceramics and Metallic Thin Films for Photonic and Sensing Applications

DTIC Science & Technology

2014-01-31

Department Chair Mechanical Engineering UC Riverside gaguilar@engr.ucr.edu Javier Garay Program Chair Materials and Engineering UC Riverside...Students: Miroslava Cano-Lara (PhD CICESE) # Yasmin Esqueda-Barron ( MSc , PhD CICESE)* Gabriel Castillo-Vega ( MSc CICESE, PhD USAL) # Rene Rodriguez...Beltran ( MSc , CICESE) # Lidia Sanchez-Hernandez (BSc UAEM) # Adela Reyes-Contreras (BSc UAEM) # Postdocs: Israel Perez (Postdoc, 4 months) USA

The Sleep of the Saved and Thankful

DTIC Science & Technology

2009-03-16

the media working with the BSC, including Henry Luce, publisher of Time, Life and Fortune magazines; Walter Lippmann, columnist for the Herald Tribune...Walter Winchell, whose syndicated gossip column was read by over 50 million people in more than 2,000 papers worldwide; Arthur H. Sulzberger...York Herald Tribune, the New York Post, and the Baltimore Sun, – the places where the BSC had the most success in finding sympathetic columnists and

Designing and Using Projects with Real World Application in a MBA Managerial Accounting Class: The Case of The Balanced Scorecard

ERIC Educational Resources Information Center

Houke, Charlotte

2017-01-01

This paper explores the purpose of designing and using projects with real world application in a M.B.A. managerial accounting class. Included is a discussion of how and why the Balanced Scorecard (BSC) Project has been used in classes to link theory with practice by providing real world application of the BSC framework. M.B.A. students represent a…

Active G protein-coupled receptors (GPCR), matrix metalloproteinases 2/9 (MMP2/9), heparin-binding epidermal growth factor (hbEGF), epidermal growth factor receptor (EGFR), erbB2, and insulin-like growth factor 1 receptor (IGF-1R) are necessary for trenbolone acetate-induced alterations in protein turnover rate of fused bovine satellite cell cultures.

PubMed

Thornton, K J; Kamanga-Sollo, E; White, M E; Dayton, W R

2016-06-01

Trenbolone acetate (TBA), a testosterone analog, increases protein synthesis and decreases protein degradation in fused bovine satellite cell (BSC) cultures. However, the mechanism through which TBA alters these processes remains unknown. Recent studies indicate that androgens improve rate and extent of muscle growth through a nongenomic mechanism involving G protein-coupled receptors (GPCR), matrix metalloproteinases (MMP), heparin-binding epidermal growth factor (hbEGF), the epidermal growth factor receptor (EGFR), erbB2, and the insulin-like growth factor-1 receptor (IGF-1R). We hypothesized that TBA activates GPCR, resulting in activation of MMP2/9 that releases hbEGF, which activates the EGFR and/or erbB2. To determine whether the proposed nongenomic pathway is involved in TBA-mediated alterations in protein turnover, fused BSC cultures were treated with TBA in the presence or absence of inhibitors for GPCR, MMP2/9, hbEGF, EGFR, erbB2, or IGF-1R, and resultant protein synthesis and degradation rates were analyzed. Assays were replicated at least 9 times for each inhibitor experiment utilizing BSC cultures obtained from at least 3 different steers that had no previous exposure to steroid compounds. As expected, fused BSC cultures treated with 10 n TBA exhibited increased ( < 0.05) protein synthesis rates and decreased ( < 0.05) protein degradation rates when compared to control cultures. Treatment of fused BSC cultures with 10 n TBA in the presence of inhibitors for GPCR, MMP2/9, hbEGF, EGFR, erbB2, or IGF-1R suppressed ( < 0.05) TBA-mediated increases in protein synthesis rate. Alternatively, inhibition of GPCR, MMP2/9, hbEGF, EGFR, erbB2, or IGF-1R in the presence of 10 n TBA each had no ( > 0.05) effect on TBA-mediated decreases in protein degradation. However, inhibition of both EGFR and erbB2 in the presence of 10 n TBA resulted in decreased ( < 0.05) ability of TBA to decrease protein degradation rate. Additionally, fused BSC cultures treated with 10 n TBA exhibit increased ( < 0.05) pAKT protein levels. These data indicate the TBA-mediated increases in protein synthesis likely involve GPCR, MMP2/9, hbEGF, EGFR, erbB2, and IGF-1R. However, the mechanism through which TBA mediates changes in protein degradation is different and appears to involve only the EGFR and erbB2. Furthermore, it appears the protein kinase B pathway is involved in TBA's effects on fused BSC cultures.

Optimization technique for rolled edge control process based on the acentric tool influence functions.

PubMed

Du, Hang; Song, Ci; Li, Shengyi; Xu, Mingjin; Peng, Xiaoqiang

2017-05-20

In the process of computer controlled optical surfacing (CCOS), the uncontrollable rolled edge restricts further improvements of the machining accuracy and efficiency. Two reasons are responsible for the rolled edge problem during small tool polishing. One is that the edge areas cannot be processed because of the orbit movement. The other is that changing the tool influence function (TIF) is difficult to compensate for in algorithms, since pressure step appears in the local pressure distribution at the surface edge. In this paper, an acentric tool influence function (A-TIF) is designed to remove the rolled edge after CCOS polishing. The model of A-TIF is analyzed theoretically, and a control point translation dwell time algorithm is used to verify that the full aperture of the workpiece can be covered by the peak removal point of the tool influence functions. Thus, surface residual error in the full aperture can be effectively corrected. Finally, the experiments are carried out. Two fused silica glass samples of 100  mm×100  mm are polished by traditional CCOS and the A-TIF method, respectively. The rolled edge was clearly produced in the sample polished by the traditional CCOS, while residual errors do not show this problem the sample polished by the A-TIF method. Therefore, the rolled edge caused by the traditional CCOS process is successfully suppressed during the A-TIF process. The ability to suppress the rolled edge of the designed A-TIF has been confirmed.

Edge profile analysis of Joint European Torus (JET) Thomson scattering data: Quantifying the systematic error due to edge localised mode synchronisation.

PubMed

Leyland, M J; Beurskens, M N A; Flanagan, J C; Frassinetti, L; Gibson, K J; Kempenaars, M; Maslov, M; Scannell, R

2016-01-01

The Joint European Torus (JET) high resolution Thomson scattering (HRTS) system measures radial electron temperature and density profiles. One of the key capabilities of this diagnostic is measuring the steep pressure gradient, termed the pedestal, at the edge of JET plasmas. The pedestal is susceptible to limiting instabilities, such as Edge Localised Modes (ELMs), characterised by a periodic collapse of the steep gradient region. A common method to extract the pedestal width, gradient, and height, used on numerous machines, is by performing a modified hyperbolic tangent (mtanh) fit to overlaid profiles selected from the same region of the ELM cycle. This process of overlaying profiles, termed ELM synchronisation, maximises the number of data points defining the pedestal region for a given phase of the ELM cycle. When fitting to HRTS profiles, it is necessary to incorporate the diagnostic radial instrument function, particularly important when considering the pedestal width. A deconvolved fit is determined by a forward convolution method requiring knowledge of only the instrument function and profiles. The systematic error due to the deconvolution technique incorporated into the JET pedestal fitting tool has been documented by Frassinetti et al. [Rev. Sci. Instrum. 83, 013506 (2012)]. This paper seeks to understand and quantify the systematic error introduced to the pedestal width due to ELM synchronisation. Synthetic profiles, generated with error bars and point-to-point variation characteristic of real HRTS profiles, are used to evaluate the deviation from the underlying pedestal width. We find on JET that the ELM synchronisation systematic error is negligible in comparison to the statistical error when assuming ten overlaid profiles (typical for a pre-ELM fit to HRTS profiles). This confirms that fitting a mtanh to ELM synchronised profiles is a robust and practical technique for extracting the pedestal structure.

Patterning control strategies for minimum edge placement error in logic devices

NASA Astrophysics Data System (ADS)

Mulkens, Jan; Hanna, Michael; Slachter, Bram; Tel, Wim; Kubis, Michael; Maslow, Mark; Spence, Chris; Timoshkov, Vadim

2017-03-01

In this paper we discuss the edge placement error (EPE) for multi-patterning semiconductor manufacturing. In a multi-patterning scheme the creation of the final pattern is the result of a sequence of lithography and etching steps, and consequently the contour of the final pattern contains error sources of the different process steps. We describe the fidelity of the final pattern in terms of EPE, which is defined as the relative displacement of the edges of two features from their intended target position. We discuss our holistic patterning optimization approach to understand and minimize the EPE of the final pattern. As an experimental test vehicle we use the 7-nm logic device patterning process flow as developed by IMEC. This patterning process is based on Self-Aligned-Quadruple-Patterning (SAQP) using ArF lithography, combined with line cut exposures using EUV lithography. The computational metrology method to determine EPE is explained. It will be shown that ArF to EUV overlay, CDU from the individual process steps, and local CD and placement of the individual pattern features, are the important contributors. Based on the error budget, we developed an optimization strategy for each individual step and for the final pattern. Solutions include overlay and CD metrology based on angle resolved scatterometry, scanner actuator control to enable high order overlay corrections and computational lithography optimization to minimize imaging induced pattern placement errors of devices and metrology targets.

The Ni-Cu-PGE mineralized Brejo Seco mafic-ultramafic layered intrusion, Riacho do Pontal Orogen: Onset of Tonian (ca. 900 Ma) continental rifting in Northeast Brazil

NASA Astrophysics Data System (ADS)

Salgado, Silas Santos; Ferreira Filho, Cesar Fonseca; Caxito, Fabrício de Andrade; Uhlein, Alexandre; Dantas, Elton Luiz; Stevenson, Ross

2016-10-01

The Brejo Seco mafic-ultramafic Complex (BSC) occurs at the extreme northwest of the Riacho do Pontal Orogen Internal Zone, in the northern margin of the São Francisco Craton in Northeast Brazil. The stratigraphy of this medium size (3.5 km wide and 9 km long) layered intrusion consists of four main zones, from bottom to top: Lower Mafic Zone (LMZ; mainly troctolite), Ultramafic Zone (UZ; mainly dunite and minor troctolite); Transitional Mafic Zone (TMZ; mainly troctolite) and an Upper Mafic Zone (UMZ; gabbro and minor anorthosite, troctolite, and ilmenite magnetitite). Ni-Cu-PGE mineralization occurs at the contact of the UZ with the TMZ, consisting of an up to 50 m thick stratabound zone of disseminated magmatic sulfides. An Mg-tholeiitic affinity to the parental magma is indicated by the geochemical fractionation pattern, by the magmatic crystallization sequence and by the elevated Fo content in olivine. A Smsbnd Nd isochron yielded an age of 903 ± 20 Ma, interpreted as the age of crystallization, with initial εNd = 0.8. Evidence of interaction of the BSC parental magma with sialic crust is given by the Rare Earth and trace element patterns, and by slightly negative and overall low values of εNd(900 Ma) in between -0.2 and +3.3. Contrary to early interpretations that it might constitute an ophiolite complex, based mainly on the geochemistry of the host rocks (Morro Branco metavolcanosedimentary complex), here we interpret the BSC as a typical layered mafic-ultramafic intrusion in continental crust, related to an extensional regime. The BSC is chrono-correlated to mafic dyke swarms, anorogenic granites and thick bimodal volcanics of similar age and tectonic setting in the São Francisco Craton and surrounding areas. Intrusion of the BSC was followed by continued lithospheric thinning, which led to the development of the Paulistana Complex continental rift volcanics around 888 Ma and ultimately to plate separation and the generation of new oceanic crust (Monte Orebe Complex) around 820-650 Ma ago. Thus, the BSC provides a benchmark for the onset of Tonian continental rifting in this area, and is an important marker for the processes of Rodinia breakup and dispersion recorded in South America.

WE-EF-210-05: Diagnosis and Quantification of Liver Steatosis with Quantitative Ultrasound Backscatter Technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andre, M; University of California, San Diego, San Diego, CA; Heba, E

2015-06-15

Purpose: Nonalcoholic fatty liver disease (NAFLD) is the most common cause of chronic liver disease in the United States, affects 30% of adult Americans and may progress to more serious diseases. Liver biopsy is the standard method for diagnosing NAFLD. MRI can accurately diagnose and quantify hepatic steatosis but is expensive. Sonography with qualitative interpretation by radiologists is lower cost, more accessible but less sensitive for detection. The objective of this study, using MRI proton density fat fraction (PDFF) as reference, is to assess the accuracy for diagnosing and quantifying steatosis with two quantitative US parameters-- backscatter coefficient (BSC) andmore » attenuation coefficient (AC)--derived from RF signals using the calibration phantom technique. Methods: We performed a prospective, cross-sectional analysis of a cohort of adults (n=204) with NAFLD (MRI-PDFF≥5%) and without NAFLD (controls). Subjects underwent MRI-PDFF and BSC and AC US analyses of the liver on the same day. Patients were randomly assigned to training (n=102, mean age 51±17 years, mean body mass index 31±7 kg/m{sup 2}) and validation (n=102, mean age 49±17 years, body mass index 30±6 kg/m{sup 2}) groups; 69% of patients in each group had NAFLD. Results: BSC provided AUC 0.98 (95% CI 0.95–1.00, p<0.0001) for diagnosis of NAFLD; the optimal BSC cut-off provided sensitivity, specificity, positive and negative predictive values (PPV, NPV) of 87%, 91%, 95%, and 76%, respectively. AC provided AUC 0.89 (95% CI 0.81–0.96, p<0.0001) for diagnosis of steatosis; the optimal AC cut-off provided sensitivity, specificity, PPV, NPV of 80%, 84%, 92%, and 66%, respectively. BSC and AC both correlated significantly with MRI-PDFF (P<0.0001). Conclusion: QUS BSC and AC can accurately diagnose and quantify hepatic steatosis, using MRI-PDFF as reference. With further validation, QUS may emerge as an inexpensive, widely available tool for NAFLD assessment. General support: NIH R01 CA111289, K23 -DK090303, AmerGastroAssoc Found, TF Williams Scholarship, S3000 scanner loaned by Siemens, Sucampo, JA Hartford Found, Atlantic Philanthropies Amer Gastroenterological Assoc. Agencies had no role in design/conduct of study, collection, management, analysis or interpretation of the data; preparation, review, or approval of the manuscript.« less

Scattering from binary optics

NASA Technical Reports Server (NTRS)

Ricks, Douglas W.

1993-01-01

There are a number of sources of scattering in binary optics: etch depth errors, line edge errors, quantization errors, roughness, and the binary approximation to the ideal surface. These sources of scattering can be systematic (deterministic) or random. In this paper, scattering formulas for both systematic and random errors are derived using Fourier optics. These formulas can be used to explain the results of scattering measurements and computer simulations.

Using the balanced scorecard to mobilize human resources in organizational transformation.

PubMed

Tsasis, Peter; Harber, Bruce

2008-05-01

Traditionally, the balanced scorecard (BSC) has been an effective tool in linking measurement to strategy. However, what is least understood is how the BSC can be used to redefine organizational relationships, re-engineer fundamental processes and transform organizational culture, for superior performance in an organization with the same people, services and technology that previously delivered dismal performance. This paper highlights the process and uses York Central Hospital in Toronto, Ontario, Canada as an illustrative example.

Acoustic Evaluation and Recommended Controls for Runway Supervisory Units, Laughlin AFB, Texas.

DTIC Science & Technology

1980-02-01

NR ), given in Table 2 and shown in Figures 8 through 12 , are the arithmetic differences between exterior and interior noise levels. No difference...ORG. REPORT MUM4MR , ,IT]VPARINACCI, Capt, USAF- BSC Consultant, Acoustics Evaluation Engr CAROLYN M. JONES, 2LT USAF, BSC Consultant, Industria ...Documents.,") Block 12 . Report Date. Enter here the day, month, and year or month and year as shown on the cover, Block 13. Number of Pages. Enter

Economic analysis of blood product transfusions according to the treatment of acute myeloid leukemia in the elderly.

PubMed

Cannas, G; Fattoum, J; Boukhit, M; Thomas, X

2015-01-01

Blood transfusion requirement represents one of the most significant cost driver associated with acute myeloid leukemia (AML). Low-intensity treatments (low-dose cytarabine, hypomethylating agents) have the potential to reduce transfusion dependence, and improve health-related quality of life. We assessed the cost-effectiveness of treatment types regarding blood product transfusions in a cohort of 214 AML patients aged ≥ 70 years. Analyzes did not indicate any significant overall survival (OS) advantage of intensive chemotherapy comparatively to low-intensity treatment. The difference was significant when compared to best supportive care (BSC) (P<0.0001). Blood products transfusion cost per patient was 1.3 times lower with low-intensity therapy and 2.7 times lower with BSC than with intensive chemotherapy. Mean transfusion cost per patient according to OS varied from 2.4 to 1.3 times less with low-intensity treatment comparatively to intensive chemotherapy for patients having OS ≤ 13.3 months. Costs varied from 3.5 to 2.6 times less with BSC comparatively to intensive chemotherapy. In contrast, mean transfusion costs were comparable among treatments for patients with OS>13.3 months. Low-intensity treatments represent a cost-effective alternative to BSC and require a reduced number of transfused blood products comparatively to intensive chemotherapy, while OS was not significantly different. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Density-dependent regulation of growth of BSC-1 cells in cell culture: control of growth by serum factors.

PubMed Central

Holley, R W; Armour, R; Baldwin, J H; Brown, K D; Yeh, Y C

1977-01-01

BSC-1 cells grow slowly, to high cell density, in medium with 0.1% calf serum. An increase in the serum concentration increases both the growth rate of the cells and the final cell density. The serum can be replaced to some extent by epidermal growth factor (EGF). Initiation of DNA synthesis in BSC-1 cells that have spread into a "wound" in a crowded cell layer requires the addition of a trace of serum or EGF, if the cells have previously been deprived of serum. The binding of 125I-labeled EGF to low-density and high-density BSC-1 cells has been studied. Binding is faster to low-density cells. Cells at low cell density also bind much more EGF per cell than cells at high cell density. The fraction of bound 125I-labeled EGF that is present on the cell surface as intact EGF is larger at low than at high cell density. The results indicate that the number of available EGF receptors per cell decreases drastically as the cell density increases. It is suggested that a decrease in the number of available EGF receptor sites per cell, and the accompanying decrease in sensitivity of the cells to EGF, contributes to density-dependent regulation of growth of these cells. Images PMID:303774

Synchronization using pulsed edge tracking in optical PPM communication system

NASA Technical Reports Server (NTRS)

Gagliardi, R.

1972-01-01

A pulse position modulated (PPM) optical communication system using narrow pulses of light for data transmission requires accurate time synchronization between transmitter and receiver. The presence of signal energy in the form of optical pulses suggests the use of a pulse edge tracking method of maintaining the necessary timing. The edge tracking operation in a binary PPM system is examined, taking into account the quantum nature of the optical transmissions. Consideration is given first to pure synchronization using a periodic pulsed intensity, then extended to the case where position modulation is present and auxiliary bit decisioning is needed to aid the tracking operation. Performance analysis is made in terms of timing error and its associated statistics. Timing error variances are shown as a function of system signal to noise ratio.

Practical Study for the Properties of Hueckel Edge Detection Operator

NASA Astrophysics Data System (ADS)

Jabbar, Hameed M. Abdul; Hatem, Amal J.; Ameer, Inbethaq M. A. Abdul

2018-05-01

The first practical study for the Hueckel edge detection operator was presented in this research, where it is tested on standard step edge set images. A number of criteria were adopted to evaluate its practical performance, which is the accuracy in detecting the edges direction, the error in the edges location (dislocation), edges width, the calculated edge goodness criterion and the consumed execution time. These criteria were studied with the edge direction and the used disk radius of the Hueckel edge detection operator. Important notes were recorded for the performance of this operator depending on the direction of the edge and/or with the radius of the used disk. There is a variation in the performance of the operator in terms of precision in detecting of the edges direction and position. A discussion was presented for the all criteria adopted in the research.

The role of nonmagnetic d{sup 0} vs. d{sup 10}B-type cations on the magnetic exchange interactions in osmium double perovskites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feng, Hai L., E-mail: Hai.Feng@cpfs.mpg.de; Yamaura, Kazunari; Tjeng, Liu Hao

Polycrystalline samples of double perovskites Ba{sub 2}BOsO{sub 6} (B=Sc, Y, In) were synthesized by solid state reactions. They adopt the cubic double perovskite structures (space group, Fm-3m) with ordered B and Os arrangements. Ba{sub 2}BOsO{sub 6} (B=Sc, Y, In) show antiferromagnetic transitions at 93 K, 69 K, and 28 K, respectively. The Weiss-temperatures are −590 K for Ba{sub 2}ScOsO{sub 6}, −571 K for Ba{sub 2}YOsO{sub 6}, and −155 K for Ba{sub 2}InOsO{sub 6}. Sc{sup 3+} and Y{sup 3+} have the open-shell d{sup 0} electronic configuration, while In{sup 3+} has the closed-shell d{sup 10}. This indicates that a d{sup 0} B-typemore » cation induces stronger overall magnetic exchange interactions in comparison to a d{sup 10}. Comparison of Ba{sub 2}BOsO{sub 6} (B=Sc, Y, In) to their Sr and Ca analogues shows that the structural distortions weaken the overall magnetic exchange interactions. - Graphical abstract: Magnetic properties of osmium double perovskites Ba{sub 2}BOsO{sub 6} (B=Sc, Y, In) were studied. Comparison of Ba{sub 2}BOsO{sub 6}indicates that a d{sup 0} B-type cation induces stronger overall magnetic exchange interactions in comparison to a d{sup 10}. - Highlights: • Magnetic properties of double perovskites Ba{sub 2}BOsO{sub 6} (B=Sc, Y, In) were studied. • A d{sup 0}B-type cation induces stronger magnetic interactions than a d{sup 10}. • Structural distortions weaken the overall Os{sup 5+}-Os{sup 5+} magnetic interactions.« less

Density-dependent regulation of growth of BSC-1 cells in cell culture: Control of growth by low molecular weight nutrients

PubMed Central

Holley, Robert W.; Armour, Rosemary; Baldwin, Julia H.

1978-01-01

BSC-1 cells, epithelial cells of African green monkey kidney origin, show pronounced density-dependent regulation of growth in cell culture. Growth of the cells is rapid to a density of approximately 1.5 × 105 cells/per cm2 in Dulbecco-modified Eagle's medium supplemented with 10% calf serum. Above this “saturation density,” growth is much slower. It has been found that the glucose concentration in the culture medium is important in determining the “saturation density.” If the glucose concentration is increased 4-fold, the “saturation density” increases approximately 50%. Reduction of the “saturation density” of BSC-1 cells is also possible by decreasing the concentrations of low molecular weight nutrients in the culture medium. In medium supplemented with 0.1% calf serum, decreasing the concentrations of all of the organic constituents of the medium, from the high levels present in Dulbecco-modified Eagle's medium to concentrations near physiological levels, decreases the “saturation density” by approximately half. The decreased “saturation density” is not the result of lowering the concentration of any single nutrient but rather results from reduction of the concentrations of several nutrients. When the growth of BSC-1 cells is limited by low concentrations of all of the nutrients, some stimulation of growth results from increasing, separately, the concentrations of individual groups of nutrients, but the best growth stimulation is obtained by increasing the concentrations of all of the nutrients. The “wound healing” phenomenon, one manifestation of density-dependent regulation of growth in cell culture, is abolished by lowering the concentration of glutamine in the medium. Density-dependent regulation of growth of BSC-1 cells in cell culture thus appears to be a complex phenomenon that involves an interaction of nutrient concentrations with other regulatory factors. PMID:272650

Evidence for micronutrient limitation of biological soil crusts: Importance to arid-lands restoration

USGS Publications Warehouse

Bowker, M.A.; Belnap, J.; Davidson, D.W.; Phillips, S.L.

2005-01-01

Desertification is a global problem, costly to national economies and human societies. Restoration of biological soil crusts (BSCs) may have an important role to play in the reversal of desertification due to their ability to decrease erosion and enhance soil fertility. To determine if there is evidence that lower fertility may hinder BSC recolonization, we investigated the hypothesis that BSC abundance is driven by soil nutrient concentrations. At a regional scale (north and central Colorado Plateau, USA), moss and lichen cover and richness are correlated with a complex water-nutrient availability gradient and have approximately six-fold higher cover and approximately two-fold higher species richness on sandy soils than on shale-derived soils. At a microscale, mosses and lichens are overrepresented in microhabitats under the north sides of shrub canopies, where water and nutrients are more available. At two spatial scales, and at the individual species and community levels, our data are consistent with the hypothesis that distributions of BSC organisms are determined largely by soil fertility. The micronutrients Mn and Zn figured prominently and consistently in the various analyses, strongly suggesting that these elements are previously unstudied limiting factors in BSC development. Structural-equation modeling of our data is most consistent with the hypothesis of causal relationships between the availability of micronutrients and the abundance of the two major nitrogen (N) fixers of BSCs. Specifically, higher Mn availability may determine greater Collema tenax abundance, and both Mn and Zn may limit Collema coccophorum; alternative causal hypotheses were less consistent with the data. We propose experimental trials of micronutrient addition to promote the restoration of BSC function on disturbed lands. Arid lands, where BSCs are most prevalent, cover ???40% of the terrestrial surface of the earth; thus the information gathered in this study is potentially useful in many places worldwide. ?? 2005 by the Ecological Society of America.

Reduction of wafer-edge overlay errors using advanced correction models, optimized for minimal metrology requirements

NASA Astrophysics Data System (ADS)

Kim, Min-Suk; Won, Hwa-Yeon; Jeong, Jong-Mun; Böcker, Paul; Vergaij-Huizer, Lydia; Kupers, Michiel; Jovanović, Milenko; Sochal, Inez; Ryan, Kevin; Sun, Kyu-Tae; Lim, Young-Wan; Byun, Jin-Moo; Kim, Gwang-Gon; Suh, Jung-Joon

2016-03-01

In order to optimize yield in DRAM semiconductor manufacturing for 2x nodes and beyond, the (processing induced) overlay fingerprint towards the edge of the wafer needs to be reduced. Traditionally, this is achieved by acquiring denser overlay metrology at the edge of the wafer, to feed field-by-field corrections. Although field-by-field corrections can be effective in reducing localized overlay errors, the requirement for dense metrology to determine the corrections can become a limiting factor due to a significant increase of metrology time and cost. In this study, a more cost-effective solution has been found in extending the regular correction model with an edge-specific component. This new overlay correction model can be driven by an optimized, sparser sampling especially at the wafer edge area, and also allows for a reduction of noise propagation. Lithography correction potential has been maximized, with significantly less metrology needs. Evaluations have been performed, demonstrating the benefit of edge models in terms of on-product overlay performance, as well as cell based overlay performance based on metrology-to-cell matching improvements. Performance can be increased compared to POR modeling and sampling, which can contribute to (overlay based) yield improvement. Based on advanced modeling including edge components, metrology requirements have been optimized, enabling integrated metrology which drives down overall metrology fab footprint and lithography cycle time.

The F-16 Onboard Oxygen Generating System: Performance Evaluation and Man Rating

DTIC Science & Technology

1983-08-01

OXYGEN GENERATING , YSTEM: PERFORMANCE EVALUATION AND MAN RATING Thomas C. Horch , Captain, USAF Richard L. Miller, Ph.D. John B. Bomar, Jr...C. Horch , Capt, USAF; R. L. Miller, 8. CONTRACT OR GRANT NUMBER(i) Ph.D.; J. B. Bomar, Jr., Lt Col, IJSAF, BSC; J. B. Tedor, Maj, USAF, BSC; R. D...limitation (as of 1983); however, the information may no longer need protection since it is 14 years. At the time of its publication, Capt Thomas Horch

Monte Carlo simulation of edge placement error

NASA Astrophysics Data System (ADS)

Kobayashi, Shinji; Okada, Soichiro; Shimura, Satoru; Nafus, Kathleen; Fonseca, Carlos; Estrella, Joel; Enomoto, Masashi

2018-03-01

In the discussion of edge placement error (EPE), we proposed interactive pattern fidelity error (IPFE) as an indicator to judge pass/fail of integrated patterns. IPFE consists of lower and upper layer EPEs (CD and center of gravity: COG) and overlay, which is decided from the combination of each maximum variation. We succeeded in obtaining the IPFE density function by Monte Carlo simulation. In the results, we also found that the standard deviation (σ) of each indicator should be controlled by 4.0σ, at the semiconductor grade, such as 100 billion patterns per die. Moreover, CD, COG and overlay were analyzed by analysis of variance (ANOVA); we can discuss all variations from wafer to wafer (WTW), pattern to pattern (PTP), line edge roughness (LWR) and stochastic pattern noise (SPN) on an equal footing. From the analysis results, we can determine that these variations belong to which process and tools. Furthermore, measurement length of LWR is also discussed in ANOVA. We propose that the measurement length for IPFE analysis should not be decided to the micro meter order, such as >2 μm length, but for which device is actually desired.

A chronicle of BScN honours/ non-honours outcomes and experiences post-graduation.

PubMed

Gillis, Angela

2007-01-01

This paper reports on a graduate follow-up of the outcomes of participation in an honours BScN program, two to seven years post-graduation. It compares two groups of graduates with high GPA scores, both initially eligible to complete the honours program. One group completed the honours program; the other group completed the regular BScN program. In phase 1 of the study, a self-administered mailed questionnaire was sent to participants to assess their involvement in research activities, occupancy of leadership positions, enrollment in graduate studies and demonstration of liberal education competencies in their professional lives after graduation. In phase two, personal interviews were held with a purposive subsample of participants to explore early career workplace experiences with research-based activities and participants' perceptions of factors influencing their decision to complete or not to complete the honours program. Graduates with high GPA scores from both programs demonstrated expected professional outcomes post-graduation. Follow up at 10-12 years post-graduation and replication with larger samples are recommended.

Assessment of Barriers to Essential Surgical Care in Two Communities in the Upper West Region, Ghana.

PubMed

Gyedu, Adam; Boakye, Godfred; Dally, Charles K; Agbeko, Anita Eseenam; Abantanga, Francis A; Kushner, Adam L; Stewart, Barclay T

2017-01-01

Systematic assessments of individual-and community-level barriers to surgical care (BSC) in low-and middle-income countries that might inform potential interventions are lacking. We used a novel tool to assess BSC systematically during a surgical outreach in two communities in Upper West region, Ghana. Results were scored in three dimensions of barriers to care (acceptability, affordability, and accessibility); higher dimension scores signified less salient barriers. A total index out of 10 was derived. In total, 169 individuals participated in Nadowli (68, 40%) and in Nandom (101, 60%). Nadowli had fewer BSC than Nandom (median index 7.8 vs 7.2; p < .001). Dimension scores ranged from 10.8 to 14.5 out of 18 points. Fear or mistrust of surgical care and stigma were reported more frequently in Nandom (p < .001). Reported barriers were not always the same in each community. Systematically defining barriers to essential surgical care provides an opportunity for planning targeted interventions at the community-level.

Foldability of a Natural De Novo Evolved Protein.

PubMed

Bungard, Dixie; Copple, Jacob S; Yan, Jing; Chhun, Jimmy J; Kumirov, Vlad K; Foy, Scott G; Masel, Joanna; Wysocki, Vicki H; Cordes, Matthew H J

2017-11-07

The de novo evolution of protein-coding genes from noncoding DNA is emerging as a source of molecular innovation in biology. Studies of random sequence libraries, however, suggest that young de novo proteins will not fold into compact, specific structures typical of native globular proteins. Here we show that Bsc4, a functional, natural de novo protein encoded by a gene that evolved recently from noncoding DNA in the yeast S. cerevisiae, folds to a partially specific three-dimensional structure. Bsc4 forms soluble, compact oligomers with high β sheet content and a hydrophobic core, and undergoes cooperative, reversible denaturation. Bsc4 lacks a specific quaternary state, however, existing instead as a continuous distribution of oligomer sizes, and binds dyes indicative of amyloid oligomers or molten globules. The combination of native-like and non-native-like properties suggests a rudimentary fold that could potentially act as a functional intermediate in the emergence of new folded proteins de novo. Copyright © 2017 Elsevier Ltd. All rights reserved.

Leading-edge singularities in thin-airfoil theory

NASA Technical Reports Server (NTRS)

Jones, R. T.

1976-01-01

If the thin airfoil theory is applied to an airfoil having a rounded leading edge, a certain error will arise in the determination of the pressure distribution around the nose. It is shown that the evaluation of the drag of such a blunt nosed airfoil by the thin airfoil theory requires the addition of a leading edge force, analogous to the leading edge thrust of the lifting airfoil. The method of calculation is illustrated by application to: (1) The Joukowski airfoil in subsonic flow; and (2) the thin elliptic cone in supersonic flow. A general formula for the edge force is provided which is applicable to a variety of wing forms.

The interplay of species concepts, taxonomy, and conservation: lessons from the Hawaiian avifauna

USGS Publications Warehouse

Pratt, H. Douglas; Pratt, Thane K.

2001-01-01

The Hawaiian Islands, with their unique geological history and geographic position, provide an excellent natural laboratory in which to evaluate currently competing biological (BSC) and phylogenetic (PSC) concepts of the species. Although the BSC as historically applied in archipelagic situations is shown to be flawed in producing overlumped polytypic species, it nevertheless remains the preferable concept for most practical purposes. A review of the taxonomic history and species limits in Hawaiian birds under both concepts reveals that, when properly applied, the BSC yields a species total remarkably close to that produced under the PSC, contrary to what many proponents of the latter have supposed. We propose that the widespread adoption of the PSC for conservation purposes is potentially harmful. The PSC trivializes the species taxon and introduces new problems of deciding when a population becomes diagnosable, the possibility that species could appear and disappear in a reticulate fashion, and the likelihood that genetically diagnosable but phenotypically identical, and therefore not field identifiable, populations could be ranked as species. All of these problems negatively impact such things as constructing credible and politically defensible lists of endangered species, the prioritization of limited conservation resources, and the gathering of field data. We contend the BSC is arguably a more rational concept that better supports the activities of both scientific and nonprofessional observers. Biological species limits in oceanic archipelagoes worldwide need to be reevaluated using modern concepts and technologies before rational conservation decisions can be made.

Holistic approach for overlay and edge placement error to meet the 5nm technology node requirements

NASA Astrophysics Data System (ADS)

Mulkens, Jan; Slachter, Bram; Kubis, Michael; Tel, Wim; Hinnen, Paul; Maslow, Mark; Dillen, Harm; Ma, Eric; Chou, Kevin; Liu, Xuedong; Ren, Weiming; Hu, Xuerang; Wang, Fei; Liu, Kevin

2018-03-01

In this paper, we discuss the metrology methods and error budget that describe the edge placement error (EPE). EPE quantifies the pattern fidelity of a device structure made in a multi-patterning scheme. Here the pattern is the result of a sequence of lithography and etching steps, and consequently the contour of the final pattern contains error sources of the different process steps. EPE is computed by combining optical and ebeam metrology data. We show that high NA optical scatterometer can be used to densely measure in device CD and overlay errors. Large field e-beam system enables massive CD metrology which is used to characterize the local CD error. Local CD distribution needs to be characterized beyond 6 sigma, and requires high throughput e-beam system. We present in this paper the first images of a multi-beam e-beam inspection system. We discuss our holistic patterning optimization approach to understand and minimize the EPE of the final pattern. As a use case, we evaluated a 5-nm logic patterning process based on Self-Aligned-QuadruplePatterning (SAQP) using ArF lithography, combined with line cut exposures using EUV lithography.

A threshold-based fixed predictor for JPEG-LS image compression

NASA Astrophysics Data System (ADS)

Deng, Lihua; Huang, Zhenghua; Yao, Shoukui

2018-03-01

In JPEG-LS, fixed predictor based on median edge detector (MED) only detect horizontal and vertical edges, and thus produces large prediction errors in the locality of diagonal edges. In this paper, we propose a threshold-based edge detection scheme for the fixed predictor. The proposed scheme can detect not only the horizontal and vertical edges, but also diagonal edges. For some certain thresholds, the proposed scheme can be simplified to other existing schemes. So, it can also be regarded as the integration of these existing schemes. For a suitable threshold, the accuracy of horizontal and vertical edges detection is higher than the existing median edge detection in JPEG-LS. Thus, the proposed fixed predictor outperforms the existing JPEG-LS predictors for all images tested, while the complexity of the overall algorithm is maintained at a similar level.

Low dose CBCT reconstruction via prior contour based total variation (PCTV) regularization: a feasibility study

NASA Astrophysics Data System (ADS)

Chen, Yingxuan; Yin, Fang-Fang; Zhang, Yawei; Zhang, You; Ren, Lei

2018-04-01

Purpose: compressed sensing reconstruction using total variation (TV) tends to over-smooth the edge information by uniformly penalizing the image gradient. The goal of this study is to develop a novel prior contour based TV (PCTV) method to enhance the edge information in compressed sensing reconstruction for CBCT. Methods: the edge information is extracted from prior planning-CT via edge detection. Prior CT is first registered with on-board CBCT reconstructed with TV method through rigid or deformable registration. The edge contours in prior-CT is then mapped to CBCT and used as the weight map for TV regularization to enhance edge information in CBCT reconstruction. The PCTV method was evaluated using extended-cardiac-torso (XCAT) phantom, physical CatPhan phantom and brain patient data. Results were compared with both TV and edge preserving TV (EPTV) methods which are commonly used for limited projection CBCT reconstruction. Relative error was used to calculate pixel value difference and edge cross correlation was defined as the similarity of edge information between reconstructed images and ground truth in the quantitative evaluation. Results: compared to TV and EPTV, PCTV enhanced the edge information of bone, lung vessels and tumor in XCAT reconstruction and complex bony structures in brain patient CBCT. In XCAT study using 45 half-fan CBCT projections, compared with ground truth, relative errors were 1.5%, 0.7% and 0.3% and edge cross correlations were 0.66, 0.72 and 0.78 for TV, EPTV and PCTV, respectively. PCTV is more robust to the projection number reduction. Edge enhancement was reduced slightly with noisy projections but PCTV was still superior to other methods. PCTV can maintain resolution while reducing the noise in the low mAs CatPhan reconstruction. Low contrast edges were preserved better with PCTV compared with TV and EPTV. Conclusion: PCTV preserved edge information as well as reduced streak artifacts and noise in low dose CBCT reconstruction. PCTV is superior to TV and EPTV methods in edge enhancement, which can potentially improve the localization accuracy in radiation therapy.

A cost-effectiveness analysis of first-line induction and maintenance treatment sequences in patients with advanced nonsquamous non-small-cell lung cancer in France

PubMed Central

Taipale, Kaisa; Winfree, Katherine B; Boye, Mark; Basson, Mickael; Sleilaty, Ghassan; Eaton, James; Evans, Rachel; Chouaid, Christos

2017-01-01

Background Comparative effectiveness and cost-effectiveness data for induction–maintenance (I–M) sequences for the treatment of patients with nonsquamous non-small-cell lung cancer (nsqNSCLC) are limited because of a lack of direct evidence. This analysis aimed to compare the cost-effectiveness of I–M pemetrexed with those of other I–M regimens used for the treatment of patients with advanced nsqNSCLC in the French health-care setting. Materials and methods A previously developed global partitioned survival model was adapted to the France-only setting by restricting treatment sequences to include 12 I–M regimens most relevant to France, and incorporating French costs and resource-use data. Following a systematic literature review, network meta-analyses were performed to obtain hazard ratios for progression-free survival (PFS) and overall survival (OS) relative to gemcitabine + cisplatin (induction sequences) or best supportive care (BSC) (maintenance sequences). Modeled health-care benefits were expressed as life-years (LYs) and quality-adjusted LYs (QALYs) (estimated using French EuroQol five-dimension questionnaire tariffs). The study was conducted from the payer perspective (National Health Insurance). Cost- and benefit-model inputs were discounted at an annual rate of 4%. Results Base-case results showed pemetrexed + cisplatin induction followed by (→) pemetrexed maintenance had the longest mean OS and PFS and highest LYs and QALYs. Costs ranged from €12,762 for paclitaxel + carboplatin → BSC to €35,617 for pemetrexed + cisplatin → pemetrexed (2015 values). Gemcitabine + cisplatin → BSC, pemetrexed + cisplatin → BSC, and pemetrexed + cisplatin → pemetrexed were associated with fully incremental cost-effectiveness ratios (ICERs) of €16,593, €80,656, and €102,179, respectively, per QALY gained versus paclitaxel + carboplatin → BSC. All other treatment sequences were either dominated (ie, another sequence had lower costs and better/equivalent outcomes) or extendedly dominated (ie, the comparator had a higher ICER than a more effective comparator) in the model. Sensitivity analyses showed the model to be relatively insensitive to plausible changes in the main assumptions, with none increasing or decreasing the ICER by more than ~€20,000 per QALY gained. Conclusion In the absence of direct comparative trial evidence, this cost-effectiveness analysis indicated that of a large number of I–M sequences used for the treatment of patients with nsqNSCLC in France, pemetrexed + cisplatin → pemetrexed achieved the best clinical outcomes (0.28 incremental QALYs gained) versus paclitaxel + carboplatin → BSC. PMID:28860832

Beam-Switch Transient Effects in the RF Path of the ICAPA Receive Phased Array Antenna

NASA Technical Reports Server (NTRS)

Sands, O. Scott

2003-01-01

When the beam of a Phased Array Antenna (PAA) is switched from one pointing direction to another, transient effects in the RF path of the antenna are observed. Testing described in the report has revealed implementation-specific transient effects in the RF channel that are associated with digital clocking pulses that occur with transfer of data from the Beam Steering Controller (BSC) to the digital electronics of the PAA under test. The testing described here provides an initial assessment of the beam-switch phenomena by digitally acquiring time series of the RF communications channel, under CW excitation, during the period of time that the beam switch transient occurs. Effects are analyzed using time-frequency distributions and instantaneous frequency estimation techniques. The results of tests conducted with CW excitation supports further Bit-Error-Rate (BER) testing of the PAA communication channel.

Lunar-edge based on-orbit modulation transfer function (MTF) measurement

NASA Astrophysics Data System (ADS)

Cheng, Ying; Yi, Hongwei; Liu, Xinlong

2017-10-01

Modulation transfer function (MTF) is an important parameter for image quality evaluation of on-orbit optical image systems. Various methods have been proposed to determine the MTF of an imaging system which are based on images containing point, pulse and edge features. In this paper, the edge of the moon can be used as a high contrast target to measure on-orbit MTF of image systems based on knife-edge methods. The proposed method is an extension of the ISO 12233 Slanted-edge Spatial Frequency Response test, except that the shape of the edge is a circular arc instead of a straight line. In order to get more accurate edge locations and then obtain a more authentic edge spread function (ESF), we choose circular fitting method based on least square to fit lunar edge in sub-pixel edge detection process. At last, simulation results show that the MTF value at Nyquist frequency calculated using our lunar edge method is reliable and accurate with error less than 2% comparing with theoretical MTF value.

Using Balanced Scorecard (BSC) approach to improve ergonomics programs.

PubMed

Fernandes, Marcelo Vicente Forestieri

2012-01-01

The purpose of this paper is to propose foundations for a theory of using the Balanced Scorecard (BSC) methodology to improve the strategic view of ergonomics inside the organizations. This approach may help to promote a better understanding of investing on an ergonomic program to obtain good results in quality and production, as well as health maintenance. It is explained the basics of balanced scorecard, and how ergonomists could use this to work with strategic enterprises demand. Implications of this viewpoint for the development of a new methodology for ergonomics strategy views are offered.

Preparation of a Natural Product Extract Library for Investigation Against Disease States Specific to Defence Health: A Mini Long Range Research Project

DTIC Science & Technology

2009-02-01

Sci in 1994 and with a BSc(Hons) in 1995 from The University of Melbourne. In 1999 he completed a PhD in marine natural products chemistry from the...BSc(Hons) in 1994 from the University of Melbourne. In 1998 she completed a PhD in organic chemistry , developing new free-radical syntheses of some...Melissa began work in the area of medicinal chemistry , developing partial agonists of adenosine A1 receptors; firstly at Deakin University and

Receiver design, performance analysis, and evaluation for space-borne laser altimeters and space-to-space laser ranging systems

NASA Technical Reports Server (NTRS)

Davidson, Frederic M.; Sun, Xiaoli; Field, Christopher T.

1995-01-01

Laser altimeters measure the time of flight of the laser pulses to determine the range of the target. The simplest altimeter receiver consists of a photodetector followed by a leading edge detector. A time interval unit (TIU) measures the time from the transmitted laser pulse to the leading edge of the received pulse as it crosses a preset threshold. However, the ranging error of this simple detection scheme depends on the received, pulse amplitude, pulse shape, and the threshold. In practice, the pulse shape and the amplitude are determined by the target target characteristics which has to be assumed unknown prior to the measurement. The ranging error can be improved if one also measures the pulse width and use the average of the leading and trailing edges (half pulse width) as the pulse arrival time. The ranging error becomes independent of the received pulse amplitude and the pulse width as long as the pulse shape is symmetric. The pulse width also gives the slope of the target. The ultimate detection scheme is to digitize the received waveform and calculate the centroid as the pulse arrival time. The centroid detection always gives unbiased measurement even for asymmetric pulses. In this report, we analyze the laser altimeter ranging errors for these three detection schemes using the Mars Orbital Laser Altimeter (MOLA) as an example.

A median filter approach for correcting errors in a vector field

NASA Technical Reports Server (NTRS)

Schultz, H.

1985-01-01

Techniques are presented for detecting and correcting errors in a vector field. These methods employ median filters which are frequently used in image processing to enhance edges and remove noise. A detailed example is given for wind field maps produced by a spaceborne scatterometer. The error detection and replacement algorithm was tested with simulation data from the NASA Scatterometer (NSCAT) project.

Optical measurement of propeller blade deflections

NASA Technical Reports Server (NTRS)

Kurkov, Anatole P.

1988-01-01

A nonintrusive optical method for measurement of propeller blade deflections is described and evaluated. It does not depend on the reflectivity of the blade surface but only on its opaqueness. Deflection of a point at the leading edge and a point at the trailing edge in a plane nearly perpendicular to the pitch axis is obtained using a single light beam generated by a low-power helium-neon laser. Quantitative analyses are performed from taped signals on a digital computer. Averaging techniques are employed to reduce random errors. Measured deflections from a static and a high-speed test are compared with available predicted deflections which are also used to evaluate systematic errors.

Evaluating remotely sensed plant count accuracy with differing unmanned aircraft system altitudes, physical canopy separations, and ground covers

NASA Astrophysics Data System (ADS)

Leiva, Josue Nahun; Robbins, James; Saraswat, Dharmendra; She, Ying; Ehsani, Reza

2017-07-01

This study evaluated the effect of flight altitude and canopy separation of container-grown Fire Chief™ arborvitae (Thuja occidentalis L.) on counting accuracy. Images were taken at 6, 12, and 22 m above the ground using unmanned aircraft systems. Plants were spaced to achieve three canopy separation treatments: 5 cm between canopy edges, canopy edges touching, and 5 cm of canopy edge overlap. Plants were placed on two different ground covers: black fabric and gravel. A counting algorithm was trained using Feature Analyst®. Total counting error, false positives, and unidentified plants were reported for images analyzed. In general, total counting error was smaller when plants were fully separated. The effect of ground cover on counting accuracy varied with the counting algorithm. Total counting error for plants placed on gravel (-8) was larger than for those on a black fabric (-2), however, false positive counts were similar for black fabric (6) and gravel (6). Nevertheless, output images of plants placed on gravel did not show a negative effect due to the ground cover but was impacted by differences in image spatial resolution.

Global Radius of Curvature Estimation and Control System for Segmented Mirrors

NASA Technical Reports Server (NTRS)

Rakoczy, John M. (Inventor)

2006-01-01

An apparatus controls positions of plural mirror segments in a segmented mirror with an edge sensor system and a controller. Current mirror segment edge sensor measurements and edge sensor reference measurements are compared with calculated edge sensor bias measurements representing a global radius of curvature. Accumulated prior actuator commands output from an edge sensor control unit are combined with an estimator matrix to form the edge sensor bias measurements. An optimal control matrix unit then accumulates the plurality of edge sensor error signals calculated by the summation unit and outputs the corresponding plurality of actuator commands. The plural mirror actuators respond to the actuator commands by moving respective positions of the mixor segments. A predetermined number of boundary conditions, corresponding to a plurality of hexagonal mirror locations, are removed to afford mathematical matrix calculation.

Noninvasive Diagnosis of Nonalcoholic Fatty Liver Disease and Quantification of Liver Fat Using a New Quantitative Ultrasound Technique.

PubMed

Lin, Steven C; Heba, Elhamy; Wolfson, Tanya; Ang, Brandon; Gamst, Anthony; Han, Aiguo; Erdman, John W; O'Brien, William D; Andre, Michael P; Sirlin, Claude B; Loomba, Rohit

2015-07-01

Liver biopsy analysis is the standard method used to diagnose nonalcoholic fatty liver disease (NAFLD). Advanced magnetic resonance imaging is a noninvasive procedure that can accurately diagnose and quantify steatosis, but is expensive. Conventional ultrasound is more accessible but identifies steatosis with low levels of sensitivity, specificity, and quantitative accuracy, and results vary among technicians. A new quantitative ultrasound (QUS) technique can identify steatosis in animal models. We assessed the accuracy of QUS in the diagnosis and quantification of hepatic steatosis, comparing findings with those from magnetic resonance imaging proton density fat fraction (MRI-PDFF) analysis as a reference. We performed a prospective, cross-sectional analysis of a cohort of adults (N = 204) with NAFLD (MRI-PDFF, ≥5%) and without NAFLD (controls). Subjects underwent MRI-PDFF and QUS analyses of the liver on the same day at the University of California, San Diego, from February 2012 through March 2014. QUS parameters and backscatter coefficient (BSC) values were calculated. Patients were assigned randomly to training (n = 102; mean age, 51 ± 17 y; mean body mass index, 31 ± 7 kg/m(2)) and validation (n = 102; mean age, 49 ± 17 y; body mass index, 30 ± 6 kg/m(2)) groups; 69% of patients in each group had NAFLD. BSC (range, 0.00005-0.25 1/cm-sr) correlated with MRI-PDFF (Spearman ρ = 0.80; P < .0001). In the training group, the BSC analysis identified patients with NAFLD with an area under the curve value of 0.98 (95% confidence interval, 0.95-1.00; P < .0001). The optimal BSC cut-off value identified patients with NAFLD in the training and validation groups with 93% and 87% sensitivity, 97% and 91% specificity, 86% and 76% negative predictive values, and 99% and 95% positive predictive values, respectively. QUS measurements of BSC can accurately diagnose and quantify hepatic steatosis, based on a cross-sectional analysis that used MRI-PDFF as the reference. With further validation, QUS could be an inexpensive, widely available method to screen the general or at-risk population for NAFLD. Copyright © 2015 AGA Institute. Published by Elsevier Inc. All rights reserved.

Reliability and failure modes of narrow implant systems.

PubMed

Hirata, Ronaldo; Bonfante, Estevam A; Anchieta, Rodolfo B; Machado, Lucas S; Freitas, Gileade; Fardin, Vinicius P; Tovar, Nick; Coelho, Paulo G

2016-09-01

Narrow implants are indicated in areas of limited bone width or when grafting is nonviable. However, the reduction of implant diameter may compromise their performance. This study evaluated the reliability of several narrow implant systems under fatigue, after restored with single-unit crowns. Narrow implant systems were divided (n = 18 each), as follows: Astra (ASC); BioHorizons (BSC); Straumann Roxolid (SNC), Intra-Lock (IMC), and Intra-Lock one-piece abutment (ILO). Maxillary central incisor crowns were cemented and subjected to step-stress accelerated life testing in water. Use level probability Weibull curves and reliability for a mission of 100,000 cycles at 130- and 180-N loads (90 % two-sided confidence intervals) were calculated. Scanning electron microscopy was used for fractography. Reliability for 100,000 cycles at 130 N was ∼99 % in group ASC, ∼99 % in BSC, ∼96 % in SNC, ∼99 % in IMC, and ∼100 % in ILO. At 180 N, reliability of ∼34 % resulted for the ASC group, ∼91 % for BSC, ∼53 % for SNC, ∼70 % for IMC, and ∼99 % for ILO. Abutment screw fracture was the main failure mode for all groups. Reliability was not different between systems for 100,000 cycles at the 130-N load. A significant decrease was observed at the 180-N load for ASC, SNC, and IMC, whereas it was maintained for BSC and ILO. The investigated narrow implants presented mechanical performance under fatigue that suggests their safe use as single crowns in the anterior region.

In vitro comparison of intra-abdominal hypertension development after different temporary abdominal closure techniques.

PubMed

Benninger, Emanuel; Labler, Ludwig; Seifert, Burkhardt; Trentz, Otmar; Menger, Michael D; Meier, Christoph

2008-01-01

To compare volume reserve capacity (VRC) and development of intra-abdominal hypertension after different in vitro temporary abdominal closure (TAC) techniques. A model of the abdomen was designed. The abdominal wall was simulated with polychloroprene, a synthetic rubber compound. A lentil-shaped defect of 150 cm(2) was cut into the anterior aspect of the abdominal wall. TAC of this defect was performed by a zipper system (ZS), a bag silo closure (BSC), or a vacuum assisted closure (VAC) with subatmospheric pressures ranging from 0- to 200 mmHg. The model with intact abdominal wall served as reference. The model was filled with water to baseline level. The intra-abdominal pressure was increased in 2 mmHg steps from baseline level (6 mmHg) to 40 mmHg by adding volume to the system according to a standardized protocol. VRC with corresponding intra-abdominal pressure were analyzed and compared for the different TAC techniques. VRC was the highest after BSC at all pressure levels studied (P < 0.05). VAC and ZS resulted in significantly lower VRC compared with BSC and reference (P < 0.05). The magnitude of negative pressure on the VAC did not significantly influence the VRC. In the present in vitro model, BSC demonstrated the highest VRC of all evaluated TAC techniques. Different levels of subatmospheric pressures applied to the VAC did not affect VRC. The results for ZS and VAC indicate that these TAC techniques may increase the risk for recurrent intra-abdominal hypertension and should therefore not be used in high-risk patients during the initial phase after abdominal decompression.

Realization of back-side heterogeneous hybrid III-V/Si DBR lasers for silicon photonics

NASA Astrophysics Data System (ADS)

Durel, Jocelyn; Ferrotti, Thomas; Chantre, Alain; Cremer, Sébastien; Harduin, Julie; Bernabé, Stéphane; Kopp, Christophe; Boeuf, Frédéric; Ben Bakir, Badhise; Broquin, Jean-Emmanuel

2016-02-01

In this paper, the simulation, design and fabrication of a back-side coupling (BSC) concept for silicon photonics, which targets heterogeneous hybrid III-V/Si laser integration is presented. Though various demonstrations of a complete SOI integration of passive and active photonic devices have been made, they all feature multi-level planar metal interconnects, and a lack of integrated light sources. This is mainly due to the conflict between the need of planar surfaces for III-V/Si bonding and multiple levels of metallization. The proposed BSC solution to this topographical problem consists in fabricating lasers on the back-side of the Si waveguides using a new process sequence. The devices are based on a hybrid structure composed of an InGaAsP MQW active area and a Si-based DBR cavity. The emitted light wavelength is accordable within a range of 20 nm around 1.31μm thanks to thermal heaters and the laser output is fiber coupled through a Grating Coupler (GC). From a manufacturing point of view, the BSC approach provides not only the advantages of allowing the use of a thin-BOX SOI instead of a thick one; but it also shifts the laser processing steps and their materials unfriendly to CMOS process to the far back-end areas of fabrication lines. Moreover, aside from solving technological integration issues, the BSC concept offers several new design opportunities for active and passive devices (heat sink, Bragg gratings, grating couplers enhanced with integrated metallic mirrors, tapers…). These building boxes are explored here theoretically and experimentally.

Lung Basal Stem Cells Rapidly Repair DNA Damage Using the Error-Prone Nonhomologous End-Joining Pathway

PubMed Central

Weeden, Clare E.; Chen, Yunshun; Ma, Stephen B.; Hu, Yifang; Ramm, Georg; Sutherland, Kate D.; Smyth, Gordon K.

2017-01-01

Lung squamous cell carcinoma (SqCC), the second most common subtype of lung cancer, is strongly associated with tobacco smoking and exhibits genomic instability. The cellular origins and molecular processes that contribute to SqCC formation are largely unexplored. Here we show that human basal stem cells (BSCs) isolated from heavy smokers proliferate extensively, whereas their alveolar progenitor cell counterparts have limited colony-forming capacity. We demonstrate that this difference arises in part because of the ability of BSCs to repair their DNA more efficiently than alveolar cells following ionizing radiation or chemical-induced DNA damage. Analysis of mice harbouring a mutation in the DNA-dependent protein kinase catalytic subunit (DNA-PKcs), a key enzyme in DNA damage repair by nonhomologous end joining (NHEJ), indicated that BSCs preferentially repair their DNA by this error-prone process. Interestingly, polyploidy, a phenomenon associated with genetically unstable cells, was only observed in the human BSC subset. Expression signature analysis indicated that BSCs are the likely cells of origin of human SqCC and that high levels of NHEJ genes in SqCC are correlated with increasing genomic instability. Hence, our results favour a model in which heavy smoking promotes proliferation of BSCs, and their predilection for error-prone NHEJ could lead to the high mutagenic burden that culminates in SqCC. Targeting DNA repair processes may therefore have a role in the prevention and therapy of SqCC. PMID:28125611

Emission and absorption x-ray edges of Li

DOE Office of Scientific and Technical Information (OSTI.GOV)

Callcott, T A; Arakawa, E T; Ederer, D L

1977-01-01

Measurements of the K X-ray absorption and emission edges of Li are reported. They were made with the same spectrometer at the NBS storage ring and serve to establish a 0.1 eV separation between the edges with no possibility of instrument calibration error. These results are compared with recent theories of Almbladh and Mahan describing the effects of incomplete phonon relaxation about the core hole. It is concluded that these theories give a satisfactory explanation of the data.

Synthesis, spectroscopic (FT-IR, FT-Raman, NMR, UV-Visible), Fukui function, antimicrobial and molecular docking study of (E)-1-(3-bromobenzylidene)semicarbazide by DFT method

NASA Astrophysics Data System (ADS)

Raja, M.; Raj Muhamed, R.; Muthu, S.; Suresh, M.; Muthu, K.

2017-02-01

The title compound, (E)-1-(3-bromobenzylidene)semicarbazide (3BSC) was synthesized and characterized by FT-IR, FT-Raman, UV, 1HNMR and 13CNMR spectral analysis. The optimized molecular geometry, the vibrational wavenumbers, the infrared intensities and the Raman scattering activities were calculated by using density functional theory (DFT) B3LYP method with 6-311++G(d,p) basis set. The calculated HOMO and LUMO energies show that charge transfer within the molecule. Stability of the molecule arising from hyperconjugative interactions, charge delocalization have been analyzed using natural bond orbital analysis (NBO). The hyperpolarizability calculation reveals the present material has a reasonably good propensity for nonlinear optical activity. Molecular electrostatic potential (MEP) and Fukui functions were also performed. The thermodynamic properties (heat capacity, entropy, and enthalpy) of the 3BSC at different temperatures have been calculated. The biological applications of 3BSC have been screened for its antimicrobial activity and found to exhibit antifungal and antibacterial effects. In addition, the Molecular docking was also performed for the different receptors.

A balanced scorecard approach in assessing IT value in healthcare sector: an empirical examination.

PubMed

Wu, Ing-Long; Kuo, Yi-Zu

2012-12-01

Healthcare sector indicates human-based and knowledge-intensive property. Massive IT investments are necessary to maintain competitiveness in this sector. The justification of IT investments is the major concern of senior management. Empirical studies examining IT value have found inconclusive results with little or no improvement in productivity. Little research has been conducted in healthcare sector. The balanced scorecard (BSC) strikes a balance between financial and non-financial measure and has been applied in evaluating organization-based performance. Moreover, healthcare organizations often consider their performance goal at customer satisfaction in addition to financial performance. This research thus proposed a new hierarchical structure for the BSC with placing both finance and customer at the top, internal process at the next, and learning and growth at the bottom. Empirical examination has found the importance of the new BSC structure in assessing IT investments. Learning and growth plays the initial driver for reaching both customer and financial performance through the mediator of internal process. This can provide deep insight into effectively managing IT resources in the hospitals.

Transformations, Inc. Net Zero Energy Communities, Devens, Easthampton, Townsend, Massachusetts (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2013-11-01

In 2009, Transformations, Inc. partnered with U.S. Department of Energy (DOE) Building America team Building Science Corporation (BSC) to build new net zero energy houses in three developments in Massachusetts. The company has been developing strategies for cost-effective super-insulated homes in the New England market since 2006. After years of using various construction techniques, it has developed a specific set of assemblies and specifications that achieve a 44.9% reduction in energy use compared with a home built to the 2009 International Residential Code, qualifying the houses for the DOE's Challenge Home. The super-insulated houses provide data for several research topicsmore » in a cold climate. BSC studied the moisture risks in double stud walls insulated with open cell spray foam and cellulose. The mini-split air source heat pump (ASHP) research focused on the range of temperatures experienced in bedrooms as well as the homeowners' perceptions of equipment performance. BSC also examined the developer's financing options for the photovoltaic (PV) systems, which take advantage of Solar Renewable Energy Certificates, local incentives, and state and federal tax credits.« less

Density-dependent regulation of growth of BSC-1 cells in cell culture: growth inhibitors formed by the cells.

PubMed Central

Holley, R W; Armour, R; Baldwin, J H

1978-01-01

Inhibitors formed by a monkey epithelial cell line, BSC-1, play an important role in limiting growth at high cell densities. At least three inhibitors are formed: lactic acid, ammonia, and an unidentified inhibitor that may be an unstable protein. The unidentified inhibitor is destroyed by shaking the conditioned medium, by bubbling gas through the medium, or by heating or storing the medium in the absence of cells. The concentrations of lactic acid and ammonia that accumulate in conditioned medium inhibit growth when added to fresh medium. These results, together with earlier studies, indicate that density-dependent regulation of growth of BSC-1 cells results from the combined effects of (a) inhibitors formed by the cells, (b) decreased availability of receptor sites for serum growth factors as the cells become crowded, and (c) limiting concentrations of low molecular weight nutrients in the medium. In contrast, density-dependent regulation of growth in 3T3 mouse embryo fibroblasts results almost entirely from inactivation of serum factors. PMID:273914

LiDAR Point Cloud and Stereo Image Point Cloud Fusion

DTIC Science & Technology

2013-09-01

LiDAR point cloud (right) highlighting linear edge features ideal for automatic registration...point cloud (right) highlighting linear edge features ideal for automatic registration. Areas where topography is being derived, unfortunately, do...with the least amount of automatic correlation errors was used. The following graphic (Figure 12) shows the coverage of the WV1 stereo triplet as

Model-Based Wavefront Control for CCAT

NASA Technical Reports Server (NTRS)

Redding, David; Lou, John Z.; Kissil, Andy; Bradford, Matt; Padin, Steve; Woody, David

2011-01-01

The 25-m aperture CCAT submillimeter-wave telescope will have a primary mirror that is divided into 162 individual segments, each of which is provided with 3 positioning actuators. CCAT will be equipped with innovative Imaging Displacement Sensors (IDS) inexpensive optical edge sensors capable of accurately measuring all segment relative motions. These measurements are used in a Kalman-filter-based Optical State Estimator to estimate wavefront errors, permitting use of a minimum-wavefront controller without direct wavefront measurement. This controller corrects the optical impact of errors in 6 degrees of freedom per segment, including lateral translations of the segments, using only the 3 actuated degrees of freedom per segment. The global motions of the Primary and Secondary Mirrors are not measured by the edge sensors. These are controlled using a gravity-sag look-up table. Predicted performance is illustrated by simulated response to errors such as gravity sag.

EUV local CDU healing performance and modeling capability towards 5nm node

NASA Astrophysics Data System (ADS)

Jee, Tae Kwon; Timoshkov, Vadim; Choi, Peter; Rio, David; Tsai, Yu-Cheng; Yaegashi, Hidetami; Koike, Kyohei; Fonseca, Carlos; Schoofs, Stijn

2017-10-01

Both local variability and optical proximity correction (OPC) errors are big contributors to the edge placement error (EPE) budget which is closely related to the device yield. The post-litho contact hole healing will be demonstrated to meet after-etch local variability specifications using a low dose, 30mJ/cm2 dose-to-size, positive tone developed (PTD) resist with relevant throughput in high volume manufacturing (HVM). The total local variability of the node 5nm (N5) contact holes will be characterized in terms of local CD uniformity (LCDU), local placement error (LPE), and contact edge roughness (CER) using a statistical methodology. The CD healing process has complex etch proximity effects, so the OPC prediction accuracy is challenging to meet EPE requirements for the N5. Thus, the prediction accuracy of an after-etch model will be investigated and discussed using ASML Tachyon OPC model.

A multicentre randomised controlled trial and economic evaluation of continuous positive airway pressure for the treatment of obstructive sleep apnoea syndrome in older people: PREDICT.

PubMed

McMillan, Alison; Bratton, Daniel J; Faria, Rita; Laskawiec-Szkonter, Magda; Griffin, Susan; Davies, Robert J; Nunn, Andrew J; Stradling, John R; Riha, Renata L; Morrell, Mary J

2015-06-01

The therapeutic and economic benefits of continuous positive airway pressure (CPAP) for the treatment of obstructive sleep apnoea syndrome (OSAS) have been established in middle-aged people. In older people there is a lack of evidence. To determine the clinical efficacy of CPAP in older people with OSAS and to establish its cost-effectiveness. A randomised, parallel, investigator-blinded multicentre trial with within-trial and model-based cost-effectiveness analysis. Two hundred and seventy-eight patients, aged ≥ 65 years with newly diagnosed OSAS [defined as oxygen desaturation index at ≥ 4% desaturation threshold level for > 7.5 events/hour and Epworth Sleepiness Scale (ESS) score of ≥ 9] recruited from 14 hospital-based sleep services across the UK. CPAP with best supportive care (BSC) or BSC alone. Autotitrating CPAP was initiated using standard clinical practice. BSC was structured advice on minimising sleepiness. Subjective sleepiness at 3 months, as measured by the ESS (ESS mean score: months 3 and 4) and cost-effectiveness over 12 months, as measured in quality-adjusted life-years (QALYs) calculated using the European Quality of Life-5 Dimensions (EQ-5D) and health-care resource use, information on which was collected monthly from patient diaries. Subjective sleepiness at 12 months (ESS mean score: months 10, 11 and 12) and objective sleepiness, disease-specific and generic quality of life, mood, functionality, nocturia, mobility, accidents, cognitive function, cardiovascular risk factors and events at 3 and 12 months. Two hundred and seventy-eight patients were randomised to CPAP (n = 140) or BSC (n = 138) over 27 months and 231 (83%) patients completed the trial. Baseline ESS score was similar in both groups [mean (standard deviation; SD) CPAP 11.5 (3.3), BSC 11.4 (4.2)]; groups were well balanced for other characteristics. The mean (SD) in ESS score at 3 months was -3.8 (0.4) in the CPAP group and -1.6 (0.3) in the BSC group. The adjusted treatment effect of CPAP compared with BSC was -2.1 points [95% confidence interval (CI) -3.0 to -1.3 points; p < 0.001]. At 12 months the effect was -2.0 points (95% CI -2.8 to -1.2 points; p < 0.001). The effect was greater in patients with increased CPAP use or higher baseline ESS score. The number of QALYs calculated using the EQ-5D was marginally (0.005) higher with CPAP than with BSC (95% CI -0.034 to 0.044). The average cost per patient was £1363 (95% CI £1121 to £1606) for those allocated to CPAP and £1389 (95% CI £1116 to £1662) for those allocated to BSC. On average, costs were lower in the CPAP group (mean -£35; 95% CI -£390 to £321). The probability that CPAP was cost-effective at thresholds conventionally used by the NHS (£20,000 per QALY gained) was 0.61. QALYs calculated using the Short Form questionnaire-6 Dimensions were 0.018 higher in the CPAP group (95% CI 0.003 to 0.034 QALYs) and the probability that CPAP was cost-effective was 0.96. CPAP decreased objective sleepiness (p = 0.02), increased mobility (p = 0.03) and reduced total and low-density lipoprotein cholesterol (p = 0.05, p = 0.04, respectively) at 3 months but not at 12 months. In the BSC group, there was a fall in systolic blood pressure of 3.7 mmHg at 12 months, which was not seen in the CPAP group (p = 0.04). Mood, functionality, nocturia, accidents, cognitive function and cardiovascular events were unchanged. There were no medically significant harms attributable to CPAP. In older people with OSAS, CPAP reduces sleepiness and is marginally more cost-effective than BSC over 12 months. Further work is required in the identification of potential biomarkers of sleepiness and those patients at increased risk of cognitive impairment. Early detection of which could be used to inform the clinician when in the disease cycle treatment is needed to avert central nervous system sequelae and to assist patients decision-making regarding treatment and compliance. Treatment adherence is also a challenge in clinical trials generally, and adherence to CPAP therapy in particular is a recognised concern in both research studies and clinical practice. Suggested research priorities would include a focus on optimisation of CPAP delivery or support and embracing the technological advances currently available. Finally, the improvements in quality of life in trials do not appear to reflect the dramatic changes noted in clinical practice. There should be a greater focus on patient centred outcomes which would better capture the symptomatic improvement with CPAP treatment and translate these improvements into outcomes which could be used in health economic analysis. Current Controlled Trials ISRCTN90464927. This project was funded by the National Institute for Health Research (NIHR) Health Technology Assessment programme and will be published in full in Health Technology Assessment; Vol. 19, No. 40. See the NIHR Journals Library website for further project information.

Effects of specimen preparation on the electromagnetic property measurements of solid materials with an automatic network analyzer

NASA Technical Reports Server (NTRS)

Long, E. R., Jr.

1986-01-01

Effects of specimen preparation on measured values of an acrylic's electomagnetic properties at X-band microwave frequencies, TE sub 1,0 mode, utilizing an automatic network analyzer have been studied. For 1 percent or less error, a gap between the specimen edge and the 0.901-in. wall of the specimen holder was the most significant parameter. The gap had to be less than 0.002 in. The thickness variation and alignment errors in the direction parallel to the 0.901-in. wall were equally second most significant and had to be less than 1 degree. Errors in the measurement f the thickness were third most significant. They had to be less than 3 percent. The following parameters caused errors of 1 percent or less: ratios of specimen-holder thicknesses of more than 15 percent, gaps between the specimen edge and the 0.401-in. wall less than 0.045 in., position errors less than 15 percent, surface roughness, hickness variation in the direction parallel to the 0.401-in. wall less than 35 percent, and specimen alignment in the direction parallel to the 0.401-in. wall mass than 5 degrees.

Soil physical conditions as livestock treading effect in tropical Agroecosystem of dryland and strategies to mitigate desertification risk

NASA Astrophysics Data System (ADS)

Florentino, A.; Torres, D.; Ospina, A.; Contreras, J.; Palma, Z.; Silvera, J.

2012-04-01

Soil degradation in natural ecosystem of arid and semi-arid zones of Venezuela due to livestock treading (goats) it is an important problem that affect their environment functions; increase soil erodibility, bulk density, water losses and reduce porosity, water infiltration rate and soil structural stability. The presence of biological crust (BSC) in this type of soil it is very common. The objective of this study was to evaluate the soil surface physical quality through the use of selected indicators, mainly some of that related to structural stability, infiltrability and the prediction of soil erosion risk in two zones of Lara state: 1) Quíbor (QUI) and 2) Humocaro Bajo (HB). The study was conducted on two selected plots (30 m x 20 m) in each zone, with natural vegetation and BSC cover, with areas affected by different degree of compaction due to treading in the paths where the goats are moving. Five sites per plot (50 cm x 50 cm) under vegetation cover and five sites over the path with bare soil were sampled (0-7,5 and 7,5-15 cm depth). The results showed that soil macroaggregate stability (equivalent diameter of aggregates >0,25 mm) was significantly higher (p<0,05 %) in soil with vegetation cover and BSC compared with bare soil. Sealing index, as a measure of aggregate stability, determined in laboratory under simulated rain and expressed as hydraulic conductivity of soil surface sealing (Kse), decreased with decreasing soil vegetation cover and the presence of BSC. However, Ksei (i: inicial) and Ksef (f: final) were significantly greater in soil with more than 75 % of BSC in comparison to bare soils. The sealing index it is used to for to estimate changes in soil water losses. As the sealing index increases, the susceptibility of the soil to undergo surface sealing or slaking decrease. These results suggested that soil physical properties are potential indicators of soil quality with regard to soil erodibility and showed that soils under vegetation cover had higher quality level than bare soils. Some predictive regression equation had a high R2 value and was a useful tool for to evaluate the risk of extreme climatic changes and to mitigate their detrimental effects. We conclude that the global climatic change (CCG) will have a negative effect on these agroecosystems functions, mainly in soil and water conservation, carbon sequestration, and productivity. Natural recovery of soil physical properties from treading damage of pastoral soils will be possible in the future with the implementation of soil management strategies, mainly through re-vegetation and recuperation of the BSC. Key word: Soil structure; aggregate stability; soil sealing index; hydraulic conductivity of surface sealing.

An Adaptive Source-Channel Coding with Feedback for Progressive Transmission of Medical Images

PubMed Central

Lo, Jen-Lung; Sanei, Saeid; Nazarpour, Kianoush

2009-01-01

A novel adaptive source-channel coding with feedback for progressive transmission of medical images is proposed here. In the source coding part, the transmission starts from the region of interest (RoI). The parity length in the channel code varies with respect to both the proximity of the image subblock to the RoI and the channel noise, which is iteratively estimated in the receiver. The overall transmitted data can be controlled by the user (clinician). In the case of medical data transmission, it is vital to keep the distortion level under control as in most of the cases certain clinically important regions have to be transmitted without any visible error. The proposed system significantly reduces the transmission time and error. Moreover, the system is very user friendly since the selection of the RoI, its size, overall code rate, and a number of test features such as noise level can be set by the users in both ends. A MATLAB-based TCP/IP connection has been established to demonstrate the proposed interactive and adaptive progressive transmission system. The proposed system is simulated for both binary symmetric channel (BSC) and Rayleigh channel. The experimental results verify the effectiveness of the design. PMID:19190770

Optical measurement of unducted fan blade deflections

NASA Technical Reports Server (NTRS)

Kurkov, Anatole P.

1988-01-01

A nonintrusive optical method for measuring unducted fan (or propeller) blade deflections is described and evaluated. The measurement does not depend on blade surface reflectivity. Deflection of a point at the leading edge and a point at the trailing edge in a plane nearly perpendicular to the pitch axis is obtained with a single light beam generated by a low-power, helium-neon laser. Quantitiative analyses are performed from taped signals on a digital computer. Averaging techniques are employed to reduce random errors. Measured static deflections from a series of high-speed wind tunnel tests of a counterrotating unducted fan model are compared with available, predicted deflections, which are also used to evaluate systematic errors.

Dynamic mesh adaption for triangular and tetrahedral grids

NASA Technical Reports Server (NTRS)

Biswas, Rupak; Strawn, Roger

1993-01-01

The following topics are discussed: requirements for dynamic mesh adaption; linked-list data structure; edge-based data structure; adaptive-grid data structure; three types of element subdivision; mesh refinement; mesh coarsening; additional constraints for coarsening; anisotropic error indicator for edges; unstructured-grid Euler solver; inviscid 3-D wing; and mesh quality for solution-adaptive grids. The discussion is presented in viewgraph form.

Realising the dream of becoming a nurse: Underrepresented BSc nursing students experiences.

PubMed

O'Brien, Brid; Graham, Margaret M; O'Sullivan, Deirdre

2017-07-01

This paper describes the experiences of underrepresented BSc nursing students in realising the dream of becoming a nurse in one university. In the past ten years, pre-registration nurse education has become established within higher education in Ireland. This development includes promoting access and inclusion of students from traditionally underrepresented groups in higher education. A third of nursing students currently access places on programmes through routes specifically designed for underrepresented groups. A qualitative descriptive study design provided an opportunity for student voices to be heard. Ethical approval was sought and granted. Eleven students were interviewed nearing completion of a four year BSc Nursing programme. Data analysis followed a thematic approach, in generating themes. Three themes emerged from the data: taking the first steps; finding a way and getting through. Findings highlight participants' challenges in balancing study, clinical practice and family life in achieving and realising their dream of becoming a nurse. This study illustrates the nature and complexities of participants' experiences throughout the BSc Nursing programmes towards becoming university graduates, eligible for registration as a nurse. Students from underrepresented groups bring rich and diverse life experiences in preparation for and becoming caring practitioners. It highlights the individuality within participants' experiences and draws attention to the value of personalised support for students. An opportunity to encourage the development of emotional intelligence needs to be fostered within nurse education programmes. Creating positive learning environments is critical to supporting student understanding of compassionate patient centred care. Findings have relevance for global curriculum design and structures to support individual student centred engagement. Further research is required to consider how best to support students from underrepresented groups. Copyright © 2017 Elsevier Ltd. All rights reserved.

Epidermal growth factor receptor is required for estradiol-stimulated bovine satellite cell proliferation.

PubMed

Reiter, B C; Kamanga-Sollo, E; Pampusch, M S; White, M E; Dayton, W R

2014-07-01

The objective of this study was to assess the role of the epidermal growth factor receptor (EGFR) in estradiol-17β (E2)-stimulated proliferation of cultured bovine satellite cells (BSCs). Treatment of BSC cultures with AG1478 (a specific inhibitor of EGFR tyrosine kinase activity) suppresses E2-stimulated BSC proliferation (P < 0.05). In addition, E2-stimulated proliferation is completely suppressed (P < 0.05) in BSCs in which EGFR expression is silenced by treatment with EGFR small interfering RNA (siRNA). These results indicate that EGFR is required for E2 to stimulate proliferation in BSC cultures. Both AG1478 treatment and EGFR silencing also suppress proliferation stimulated by LR3-IGF-1 (an IGF1 analogue that binds normally to the insulin-like growth factor receptor (IGFR)-1 but has little or no affinity for IGF binding proteins) in cultured BSCs (P < 0.05). Even though EGFR siRNA treatment has no effect on IGFR-1β mRNA expression in cultured BSCs, IGFR-1β protein level is substantially reduced in BSCs treated with EGFR siRNA. These data suggest that EGFR silencing results in post-transcriptional modifications that result in decreased IGFR-1β protein levels. Although it is clear that functional EGFR is necessary for E2-stimulated proliferation of BSCs, the role of EGFR is not clear. Transactivation of EGFR may directly stimulate proliferation, or EGFR may function to maintain the level of IGFR-1β which is necessary for E2-stimulated proliferation. It also is possible that the role of EGFR in E2-stimulated BSC proliferation may involve both of these mechanisms. Copyright © 2014 Elsevier Inc. All rights reserved.

Biological soil crusts across disturbance–recovery scenarios: effect of grazing regime on community dynamics.

PubMed

Concostrina-Zubiri, L; Huber-Sannwald, E; Martínez, I; Flores Flores, J L; Reyes-Agüero, J A; Escude, A; Belnap, J

Grazing represents one of the most common disturbances in drylands worldwide, affecting both ecosystem structure and functioning. Despite the efforts to understand the nature and magnitude of grazing effects on ecosystem components and processes, contrasting results continue to arise. This is particularly remarkable for the biological soil crust (BSC) communities (i.e., cyanobacteria, lichens, and bryophytes), which play an important role in soil dynamics. Here we evaluated simultaneously the effect of grazing impact on BSC communities (resistance) and recovery after livestock exclusion (resilience) in a semiarid grassland of Central Mexico. In particular, we examined BSC species distribution, species richness, taxonomical group cover (i.e., cyanobacteria, lichen, bryophyte), and composition along a disturbance gradient with different grazing regimes (low, medium, high impact) and along a recovery gradient with differently aged livestock exclosures (short-, medium-, long-term exclusion). Differences in grazing impact and time of recovery from grazing both resulted in slight changes in species richness; however, there were pronounced shifts in species composition and group cover. We found we could distinguish four highly diverse and dynamic BSC species groups: (1) species with high resistance and resilience to grazing, (2) species with high resistance but low resilience, (3) species with low resistance but high resilience, and (4) species with low resistance and resilience. While disturbance resulted in a novel diversity configuration, which may profoundly affect ecosystem functioning, we observed that 10 years of disturbance removal did not lead to the ecosystem structure found after 27 years of recovery. These findings are an important contribution to our understanding of BCS dynamics from a species and community perspective placed in a land use change context.

Ecophysiological characterization of early successional biological soil crusts in heavily human-impacted areas

NASA Astrophysics Data System (ADS)

Szyja, Michelle; Büdel, Burkhard; Colesie, Claudia

2018-04-01

Ecophysiological characterizations of photoautotrophic communities are not only necessary to identify the response of carbon fixation related to different climatic factors, but also to evaluate risks connected to changing environments. In biological soil crusts (BSCs), the description of ecophysiological features is difficult, due to the high variability in taxonomic composition and variable methodologies applied. Especially for BSCs in early successional stages, the available datasets are rare or focused on individual constituents, although these crusts may represent the only photoautotrophic component in many heavily disturbed ruderal areas, such as parking lots or building areas with increasing surface area worldwide. We analyzed the response of photosynthesis and respiration to changing BSC water contents (WCs), temperature and light in two early successional BSCs. We investigated whether the response of these parameters was different between intact BSC and the isolated dominating components. BSCs dominated by the cyanobacterium Nostoc commune and dominated by the green alga Zygogonium ericetorum were examined. A major divergence between the two BSCs was their absolute carbon fixation rate on a chlorophyll basis, which was significantly higher for the cyanobacterial crust. Nevertheless, independent of species composition, both crust types and their isolated organisms had convergent features such as high light acclimatization and a minor and very late-occurring depression in carbon uptake at water suprasaturation. This particular setup of ecophysiological features may enable these communities to cope with a high variety of climatic stresses and may therefore be a reason for their success in heavily disturbed areas with ongoing human impact. However, the shape of the response was different for intact BSC compared to separated organisms, especially in absolute net photosynthesis (NP) rates. This emphasizes the importance of measuring intact BSCs under natural conditions for collecting reliable data for meaningful analysis of BSC ecosystem services.

Biological soil crusts across disturbance-recovery scenarios: effect of grazing regime on community dynamics

USGS Publications Warehouse

Concostrina-Zubiri, L.; Huber-Sannwald, E.; Martínez, I.; Flores Flores, J. L.; Reyes-Agüero, J. A.; Escudero, A.; Belnap, Jayne

2014-01-01

Grazing represents one of the most common disturbances in drylands worldwide, affecting both ecosystem structure and functioning. Despite the efforts to understand the nature and magnitude of grazing effects on ecosystem components and processes, contrasting results continue to arise. This is particularly remarkable for the biological soil crust (BSC) communities (i.e., cyanobacteria, lichens, and bryophytes), which play an important role in soil dynamics. Here we evaluated simultaneously the effect of grazing impact on BSC communities (resistance) and recovery after livestock exclusion (resilience) in a semiarid grassland of Central Mexico. In particular, we examined BSC species distribution, species richness, taxonomical group cover (i.e., cyanobacteria, lichen, bryophyte), and composition along a disturbance gradient with different grazing regimes (low, medium, high impact) and along a recovery gradient with differently aged livestock exclosures (short-, medium-, long-term exclusion). Differences in grazing impact and time of recovery from grazing both resulted in slight changes in species richness; however, there were pronounced shifts in species composition and group cover. We found we could distinguish four highly diverse and dynamic BSC species groups: (1) species with high resistance and resilience to grazing, (2) species with high resistance but low resilience, (3) species with low resistance but high resilience, and (4) species with low resistance and resilience. While disturbance resulted in a novel diversity configuration, which may profoundly affect ecosystem functioning, we observed that 10 years of disturbance removal did not lead to the ecosystem structure found after 27 years of recovery. These findings are an important contribution to our understanding of BCS dynamics from a species and community perspective placed in a land use change context.

Configuring balanced scorecards for measuring health system performance: evidence from 5 years' evaluation in Afghanistan.

PubMed

Edward, Anbrasi; Kumar, Binay; Kakar, Faizullah; Salehi, Ahmad Shah; Burnham, Gilbert; Peters, David H

2011-07-01

In 2004, Afghanistan pioneered a balanced scorecard (BSC) performance system to manage the delivery of primary health care services. This study examines the trends of 29 key performance indicators over a 5-year period between 2004 and 2008. Independent evaluations of performance in six domains were conducted annually through 5,500 patient observations and exit interviews and 1,500 provider interviews in >600 facilities selected by stratified random sampling in each province. Generalized estimating equation (GEE) models were used to assess trends in BSC parameters. There was a progressive improvement in the national median scores scaled from 0-100 between 2004 and 2008 in all six domains: patient and community satisfaction of services (65.3-84.5, p<0.0001); provider satisfaction (65.4-79.2, p<0.01); capacity for service provision (47.4-76.4, p<0.0001); quality of services (40.5-67.4, p<0.0001); and overall vision for pro-poor and pro-female health services (52.0-52.6). The financial domain also showed improvement until 2007 (84.4-95.7, p<0.01), after which user fees were eliminated. By 2008, all provinces achieved the upper benchmark of national median set in 2004. The BSC has been successfully employed to assess and improve health service capacity and service delivery using performance benchmarking during the 5-year period. However, scorecard reconfigurations are needed to integrate effectiveness and efficiency measures and accommodate changes in health systems policy and strategy architecture to ensure its continued relevance and effectiveness as a comprehensive health system performance measure. The process of BSC design and implementation can serve as a valuable prototype for health policy planners managing performance in similar health care contexts. Please see later in the article for the Editors' Summary.

Skeletal dosimetry in the MAX06 and the FAX06 phantoms for external exposure to photons based on vertebral 3D-microCT images

NASA Astrophysics Data System (ADS)

Kramer, R.; Khoury, H. J.; Vieira, J. W.; Kawrakow, I.

2006-12-01

3D-microCT images of vertebral bodies from three different individuals have been segmented into trabecular bone, bone marrow and bone surface cells (BSC), and then introduced into the spongiosa voxels of the MAX06 and the FAX06 phantoms, in order to calculate the equivalent dose to the red bone marrow (RBM) and the BSC in the marrow cavities of trabecular bone with the EGSnrc Monte Carlo code from whole-body exposure to external photon radiation. The MAX06 and the FAX06 phantoms consist of about 150 million 1.2 mm cubic voxels each, a part of which are spongiosa voxels surrounded by cortical bone. In order to use the segmented 3D-microCT images for skeletal dosimetry, spongiosa voxels in the MAX06 and the FAX06 phantom were replaced at runtime by so-called micro matrices representing segmented trabecular bone, marrow and BSC in 17.65, 30 and 60 µm cubic voxels. The 3D-microCT image-based RBM and BSC equivalent doses for external exposure to photons presented here for the first time for complete human skeletons are in agreement with the results calculated with the three correction factor method and the fluence-to-dose response functions for the same phantoms taking into account the conceptual differences between the different methods. Additionally the microCT image-based results have been compared with corresponding data from earlier studies for other human phantoms. This article is dedicated to Prof. Dr Guenter Drexler from the Laboratório de Ciências Radiológicas, State University of Rio de Janeiro, on the occasion of his 70th birthday.

Impact of grazing intensity on seasonal variations in soil organic carbon and soil CO2 efflux in two semiarid grasslands in southern Botswana

PubMed Central

Thomas, Andrew D.

2012-01-01

Biological soil crusts (BSCs) are an important source of organic carbon, and affect a range of ecosystem functions in arid and semiarid environments. Yet the impact of grazing disturbance on crust properties and soil CO2 efflux remain poorly studied, particularly in African ecosystems. The effects of burial under wind-blown sand, disaggregation and removal of BSCs on seasonal variations in soil CO2 efflux, soil organic carbon, chlorophyll a and scytonemin were investigated at two sites in the Kalahari of southern Botswana. Field experiments were employed to isolate CO2 efflux originating from BSCs in order to estimate the C exchange within the crust. Organic carbon was not evenly distributed through the soil profile but concentrated in the BSC. Soil CO2 efflux was higher in Kalahari Sand than in calcrete soils, but rates varied significantly with seasonal changes in moisture and temperature. BSCs at both sites were a small net sink of C to the soil. Soil CO2 efflux was significantly higher in sand soils where the BSC was removed, and on calcrete where the BSC was buried under sand. The BSC removal and burial under sand also significantly reduced chlorophyll a, organic carbon and scytonemin. Disaggregation of the soil crust, however, led to increases in chlorophyll a and organic carbon. The data confirm the importance of BSCs for C cycling in drylands and indicate intensive grazing, which destroys BSCs through trampling and burial, will adversely affect C sequestration and storage. Managed grazing, where soil surfaces are only lightly disturbed, would help maintain a positive carbon balance in African drylands. PMID:23045706

High accuracy position method based on computer vision and error analysis

NASA Astrophysics Data System (ADS)

Chen, Shihao; Shi, Zhongke

2003-09-01

The study of high accuracy position system is becoming the hotspot in the field of autocontrol. And positioning is one of the most researched tasks in vision system. So we decide to solve the object locating by using the image processing method. This paper describes a new method of high accuracy positioning method through vision system. In the proposed method, an edge-detection filter is designed for a certain running condition. Here, the filter contains two mainly parts: one is image-processing module, this module is to implement edge detection, it contains of multi-level threshold self-adapting segmentation, edge-detection and edge filter; the other one is object-locating module, it is to point out the location of each object in high accurate, and it is made up of medium-filtering and curve-fitting. This paper gives some analysis error for the method to prove the feasibility of vision in position detecting. Finally, to verify the availability of the method, an example of positioning worktable, which is using the proposed method, is given at the end of the paper. Results show that the method can accurately detect the position of measured object and identify object attitude.

Image edge detection based tool condition monitoring with morphological component analysis.

PubMed

Yu, Xiaolong; Lin, Xin; Dai, Yiquan; Zhu, Kunpeng

2017-07-01

The measurement and monitoring of tool condition are keys to the product precision in the automated manufacturing. To meet the need, this study proposes a novel tool wear monitoring approach based on the monitored image edge detection. Image edge detection has been a fundamental tool to obtain features of images. This approach extracts the tool edge with morphological component analysis. Through the decomposition of original tool wear image, the approach reduces the influence of texture and noise for edge measurement. Based on the target image sparse representation and edge detection, the approach could accurately extract the tool wear edge with continuous and complete contour, and is convenient in charactering tool conditions. Compared to the celebrated algorithms developed in the literature, this approach improves the integrity and connectivity of edges, and the results have shown that it achieves better geometry accuracy and lower error rate in the estimation of tool conditions. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Network reconstruction via graph blending

NASA Astrophysics Data System (ADS)

Estrada, Rolando

2016-05-01

Graphs estimated from empirical data are often noisy and incomplete due to the difficulty of faithfully observing all the components (nodes and edges) of the true graph. This problem is particularly acute for large networks where the number of components may far exceed available surveillance capabilities. Errors in the observed graph can render subsequent analyses invalid, so it is vital to develop robust methods that can minimize these observational errors. Errors in the observed graph may include missing and spurious components, as well fused (multiple nodes are merged into one) and split (a single node is misinterpreted as many) nodes. Traditional graph reconstruction methods are only able to identify missing or spurious components (primarily edges, and to a lesser degree nodes), so we developed a novel graph blending framework that allows us to cast the full estimation problem as a simple edge addition/deletion problem. Armed with this framework, we systematically investigate the viability of various topological graph features, such as the degree distribution or the clustering coefficients, and existing graph reconstruction methods for tackling the full estimation problem. Our experimental results suggest that incorporating any topological feature as a source of information actually hinders reconstruction accuracy. We provide a theoretical analysis of this phenomenon and suggest several avenues for improving this estimation problem.

An improved parallel fuzzy connected image segmentation method based on CUDA.

PubMed

Wang, Liansheng; Li, Dong; Huang, Shaohui

2016-05-12

Fuzzy connectedness method (FC) is an effective method for extracting fuzzy objects from medical images. However, when FC is applied to large medical image datasets, its running time will be greatly expensive. Therefore, a parallel CUDA version of FC (CUDA-kFOE) was proposed by Ying et al. to accelerate the original FC. Unfortunately, CUDA-kFOE does not consider the edges between GPU blocks, which causes miscalculation of edge points. In this paper, an improved algorithm is proposed by adding a correction step on the edge points. The improved algorithm can greatly enhance the calculation accuracy. In the improved method, an iterative manner is applied. In the first iteration, the affinity computation strategy is changed and a look up table is employed for memory reduction. In the second iteration, the error voxels because of asynchronism are updated again. Three different CT sequences of hepatic vascular with different sizes were used in the experiments with three different seeds. NVIDIA Tesla C2075 is used to evaluate our improved method over these three data sets. Experimental results show that the improved algorithm can achieve a faster segmentation compared to the CPU version and higher accuracy than CUDA-kFOE. The calculation results were consistent with the CPU version, which demonstrates that it corrects the edge point calculation error of the original CUDA-kFOE. The proposed method has a comparable time cost and has less errors compared to the original CUDA-kFOE as demonstrated in the experimental results. In the future, we will focus on automatic acquisition method and automatic processing.

New main reflector, subreflector and dual chamber concepts for compact range applications

NASA Technical Reports Server (NTRS)

Pistorius, C. W. I.; Burnside, W. D.

1987-01-01

A compact range is a facility used for the measurement of antenna radiation and target scattering problems. Most presently available parabolic reflectors do not produce ideal uniform plane waves in the target zone. Design improvements are suggested to reduce the amplitude taper, ripple and cross polarization errors. The ripple caused by diffractions from the reflector edges can be reduced by adding blended rolled edges and shaping the edge contour. Since the reflected edge continues smoothly from the parabola onto the rolled surface, rather than being abruptly terminated, the discontinuity in the reflected field is reduced which results in weaker diffracted fields. This is done by blending the rolled edges from the parabola into an ellipse. An algorithm which enables one to design optimum blended rolled edges was developed that is based on an analysis of the continuity of the surface radius of curvature and its derivatives across the junction. Futhermore, a concave edge contour results in a divergent diffracted ray pattern and hence less stray energy in the target zone. Design equations for three-dimensional reflectors are given. Various examples were analyzed using a new physical optics method which eliminates the effects of the false scattering centers on the incident shadow boundaries. A Gregorian subreflector system, in which both the subreflector and feed axes are tilted, results in a substantial reduction in the amplitude taper and cross polarization errors. A dual chamber configuration is proposed to eliminate the effects of diffraction from the subreflector and spillover from the feed. A computationally efficient technique, based on ray tracing and aperture integration, was developed to analyze the scattering from a lossy dielectric slab with a wedge termination.

[Application of the balanced scorecard for evaluating the training process].

PubMed

Venturoli, Cristiana; Gamberoni, Loredana

2009-01-01

A training project in which nurses acted as tutors to novice nurses was introduced in the Ferrara University Hospital, with the aim of helping them to achieve the skills and professional expertise required in an operating theatre environment. Owing to the involvement of all the surgical divisions of the hospital and the continual addition of new staff, the Balanced Scorecard method (BSC) was used to assess the impact of training on the entire organization. The BSC method, a multidimensional method born in the USA in the 1990's, made it possible to assess the utility of training in the light of achieving institutional goals.

Applying the Balanced Scorecard approach in teaching hospitals: a literature review and conceptual framework.

PubMed

Trotta, Annarita; Cardamone, Emma; Cavallaro, Giusy; Mauro, Marianna

2013-01-01

Teaching hospitals (THs) simultaneously serve three different roles: offering medical treatment, teaching future doctors and promoting research. The international literature recognises such organisations as 'peaks of excellence' and highlights their economic function in the health system. In addition, the literature describes the urgent need to manage the complex dynamics and inefficiency issues that threaten the survival of teaching hospitals worldwide. In this context, traditional performance measurement systems that focus only on accounting and financial measures appear to be inadequate. Given that THs are highly specific and complex, a multidimensional system of performance measurement, such as the Balanced Scorecard (BSC), may be more appropriate because of the multitude of stakeholders, each of whom seek a specific type of accountability. The aim of the paper was twofold: (i) to review the literature on the BSC and its applications in teaching hospitals and (ii) to propose a scorecard framework that is suitable for assessing the performance of THs and serving as a guide for scholars and practitioners. In addition, this research will contribute to the ongoing debate on performance evaluation systems by suggesting a revised BSC framework and proposing specific performance indicators for THs. Copyright © 2012 John Wiley & Sons, Ltd.

[On the ultimate goal of management in Spanish hospitals].

PubMed

Pastor Tejedor, Jesús

2009-01-01

The European Foundation for Quality Management (EFQM) is the most introduced model in Spanish hospitals. The main target of this model is the internal and external client's satisfaction. The model of strategic management Balanced Scorecard (BSC) facilitates the alignment between management and the mission and vision of hospitals. For this reason, we propose a model of integrated management: EFQM-BSC. In order to obtain the items of this research, a survey was conducted among managers of Spanish hospitals on a battery of 46 indicators, selected from the EFQM model, and prioritised and included in the four perspectives of the BSC model. The research shows two possible models of hypothesis: the client model, where the final effect would be the client perspective (patient, staff and society's satisfaction), or the financial model, where the final effect would be the economic and financial results. After a reliability, dimension analysis and a discriminant analysis, it was obtained more consistent indicators which better explain each perspective. The relationship among these perspectives are determined by structural equations based on methods of partial least squares. The research confirms that the client model reflects a better consistency in its hypothesis.

Use of Hydrogen Peroxide Vapor for Deactivation of Mycobacterium tuberculosis in a Biological Safety Cabinet and a Room▿

PubMed Central

Hall, Leslie; Otter, Jonathan A.; Chewins, John; Wengenack, Nancy L.

2007-01-01

Mycobacterium tuberculosis is an important human pathogen that is routinely cultured in clinical and research laboratories. M. tuberculosis can contaminate surfaces and is highly resistant to disinfection. We investigated whether hydrogen peroxide vapor (HPV) is effective for the deactivation of M. tuberculosis on experimentally contaminated surfaces in a biological safety cabinet (BSC) and a room. Biological indicators (BIs) consisting of an ∼3-log10 inoculum of M. tuberculosis on stainless steel discs and a 6-log10 inoculum of Geobacillus stearothermophilus were exposed to HPV in BSC time course experiments and at 10 locations during room experiments. In three separate BSC experiments, M. tuberculosis BIs were transferred to growth media at 15-min intervals during a 180-min HPV exposure period. No M. tuberculosis BIs grew following 30 min of HPV exposure. In three separate room experiments, M. tuberculosis and G. stearothermophilus BIs were exposed to HPV for 90, 120, and 150 min, respectively. BIs for both microorganisms were deactivated in all 10 locations following 90 min of HPV exposure. HPV provides an alternative to traditional decontamination methods, such as formaldehyde fumigation, for laboratories and other areas contaminated with M. tuberculosis. PMID:17166957

Expression of the ribulose-1,5-bisphosphate carboxylase large subunit gene and three small subunit genes in two cell types of maize leaves

PubMed Central

Sheen, Jenq-Yunn; Bogorad, Lawrence

1986-01-01

Transcripts of three distinct ribulose-1,5-bisphosphate carboxylase (RuBPC) small subunit (SS) genes account for ∼90% of the mRNA for this protein in maize leaves. Transcripts of two of them constitute >80% of the SS mRNA in 24-h greening maize leaves. The third gene contribute ∼10%. Transcripts of all three nuclear-encoded SS genes are detectable in bundle sheath (BSC) and mesophyll cells (MC) of etiolated maize leaves. The level of mRNA for each gene is different in etioplasts of MC but all drop during photoregulated development of chloroplasts in MC and follow a pattern of transitory rise and fall in BSC. The amounts of LS and SS proteins continue to increase steadily well after the mRNA levels reach their peaks in BSC. The molar ratio of mRNA for chloroplast-encoded RuBPC large subunit (LS) to the nuclear genome encoded SS is about 10:1 although LS and SS proteins are present in about equimolar amounts. ImagesFig. 1.Fig. 2.Fig. 3.Fig. 4.Fig. 5.Fig. 6. PMID:16453739

Knowledge, attitude and practice of B.Sc. Pharmacy students about antibiotics in Trinidad and Tobago.

PubMed

Ahmad, Akram; Khan, Muhammad Umair; Patel, Isha; Maharaj, Sandeep; Pandey, Sureshwar; Dhingra, Sameer

2015-01-01

The aim of this study was to assess the knowledge, attitude and practice of B.Sc. Pharmacy students about usage and resistance of antibiotics in Trinidad and Tobago. This was a cross-sectional questionnaire-based study involving B.Sc. Pharmacy students. The questionnaire was divided into five components including Demographics data, knowledge about antibiotic use, attitude toward antibiotic use and resistance, self-antibiotic usage and possible causes of antibiotic resistance. Data were analyzed by employing Mann-Whitney and Chi-square tests using SPSS version 20. The response rate was 83.07%. The results showed good knowledge of antibiotic use among students. The overall attitude of pharmacy students was poor. About 75% of participants rarely use antibiotics, whereas self-decision was the major reason of antibiotic use (40.7%) and main source of information was retail pharmacist (42.6%). Common cold and flu is a major problem for which antibiotics were mainly utilized by pharmacy students (35.2%). The study showed good knowledge of pharmacy students regarding antibiotic usage. However, students' attitude towards antibiotic use was poor. The study recommends future studies to be conducted with interventional design to improve knowledge and attitude of pharmacy students about antibiotic use and resistance.

Wavefront Compensation Segmented Mirror Sensing and Control

NASA Technical Reports Server (NTRS)

Redding, David C.; Lou, John Z.; Kissil, Andrew; Bradford, Charles M.; Woody, David; Padin, Stephen

2012-01-01

The primary mirror of very large submillimeter-wave telescopes will necessarily be segmented into many separate mirror panels. These panels must be continuously co-phased to keep the telescope wavefront error less than a small fraction of a wavelength, to ten microns RMS (root mean square) or less. This performance must be maintained continuously across the full aperture of the telescope, in all pointing conditions, and in a variable thermal environment. A wavefront compensation segmented mirror sensing and control system, consisting of optical edge sensors, Wavefront Compensation Estimator/Controller Soft ware, and segment position actuators is proposed. Optical edge sensors are placed two per each segment-to-segment edge to continuously measure changes in segment state. Segment position actuators (three per segment) are used to move the panels. A computer control system uses the edge sensor measurements to estimate the state of all of the segments and to predict the wavefront error; segment actuator commands are computed that minimize the wavefront error. Translational or rotational motions of one segment relative to the other cause lateral displacement of the light beam, which is measured by the imaging sensor. For high accuracy, the collimator uses a shaped mask, such as one or more slits, so that the light beam forms a pattern on the sensor that permits sensing accuracy of better than 0.1 micron in two axes: in the z or local surface normal direction, and in the y direction parallel to the mirror surface and perpendicular to the beam direction. Using a co-aligned pair of sensors, with the location of the detector and collimated light source interchanged, four degrees of freedom can be sensed: transverse x and y displacements, as well as two bending angles (pitch and yaw). In this approach, each optical edge sensor head has a collimator and an imager, placing one sensor head on each side of a segment gap, with two parallel light beams crossing the gap. Two sets of optical edge sensors are used per segment-to-segment edge, separated by a finite distance along the segment edge, for four optical heads, each with an imager and a collimator. By orienting the beam direction of one edge sensor pair to be +45 away from the segment edge direction, and the other sensor pair to be oriented -45 away from the segment edge direction, all six degrees of freedom of relative motion between the segments can be measured with some redundancy. The software resides in a computer that receives each of the optical edge sensor signals, as well as telescope pointing commands. It feeds back the edge sensor signals to keep the primary mirror figure within specification. It uses a feed-forward control to compensate for global effects such as decollimation of the primary and secondary mirrors due to gravity sag as the telescope pointing changes to track science objects. Three segment position actuators will be provided per segment to enable controlled motions in the piston, tip, and tilt degrees of freedom. These actuators are driven by the software, providing the optical changes needed to keep the telescope phased.

A probabilistic verification score for contours demonstrated with idealized ice-edge forecasts

NASA Astrophysics Data System (ADS)

Goessling, Helge; Jung, Thomas

2017-04-01

We introduce a probabilistic verification score for ensemble-based forecasts of contours: the Spatial Probability Score (SPS). Defined as the spatial integral of local (Half) Brier Scores, the SPS can be considered the spatial analog of the Continuous Ranked Probability Score (CRPS). Applying the SPS to idealized seasonal ensemble forecasts of the Arctic sea-ice edge in a global coupled climate model, we demonstrate that the SPS responds properly to ensemble size, bias, and spread. When applied to individual forecasts or ensemble means (or quantiles), the SPS is reduced to the 'volume' of mismatch, in case of the ice edge corresponding to the Integrated Ice Edge Error (IIEE).

The occultation of 28 Sgr by Saturn - Saturn pole position and astrometry

NASA Technical Reports Server (NTRS)

Hubbard, W. B.; Porco, C. C.; Hunten, D. M.; Rieke, G. H.; Rieke, M. J.; Mccarthy, D. W.; Haemmerle, V.; Clark, R.; Turtle, E. P.; Haller, J.

1993-01-01

Saturn's ring plane-defined pole position is presently derived from the geometry of Saturn's July 3, 1989 occultation of 28 Sgr, as indicated by the timings of 12 circular edges in the Saturn C-ring as well as the edges of the Encke gap and the outer edge of the Keeler gap. The edge timings are used to solve for the position angle and opening angle of the apparent ring ellipses; the internal consistency of the data set and the redundancy of stations indicates an absolute error of the order of 5 km. The pole position thus obtained is consistent with the pole and ring radius scale derived from Voyager occultation observations.

Pupillometry: Cutting Edge Biometrics for Early Intervention in Increased Intracranial Pressure.

PubMed

John, Jennilee St

2015-10-01

The pupillometer, a cutting-edge biometric device, is a valuable assessment tool that can aid in the early detection and prompt treatment of neurological abnormalities. Pupil assessment is a critical component of the neurological examination, and manual pupil assessment leaves much room for error. Automated pupillometry improves the quality and reliability of pupillary and neurological assessments, ultimately improving patient outcomes. Copyright 2015, SLACK Incorporated.

A Semi-Automatic Method for Image Analysis of Edge Dynamics in Living Cells

PubMed Central

Huang, Lawrence; Helmke, Brian P.

2011-01-01

Spatial asymmetry of actin edge ruffling contributes to the process of cell polarization and directional migration, but mechanisms by which external cues control actin polymerization near cell edges remain unclear. We designed a quantitative image analysis strategy to measure the spatiotemporal distribution of actin edge ruffling. Time-lapse images of endothelial cells (ECs) expressing mRFP-actin were segmented using an active contour method. In intensity line profiles oriented normal to the cell edge, peak detection identified the angular distribution of polymerized actin within 1 µm of the cell edge, which was localized to lamellipodia and edge ruffles. Edge features associated with filopodia and peripheral stress fibers were removed. Circular statistical analysis enabled detection of cell polarity, indicated by a unimodal distribution of edge ruffles. To demonstrate the approach, we detected a rapid, nondirectional increase in edge ruffling in serum-stimulated ECs and a change in constitutive ruffling orientation in quiescent, nonpolarized ECs. Error analysis using simulated test images demonstrate robustness of the method to variations in image noise levels, edge ruffle arc length, and edge intensity gradient. These quantitative measurements of edge ruffling dynamics enable investigation at the cellular length scale of the underlying molecular mechanisms regulating actin assembly and cell polarization. PMID:21643526

[Bristol Stool Chart: Prospective and monocentric study of "stools introspection" in healthy subjects].

PubMed

Amarenco, G

2014-09-01

The Bristol Stool Chart (BSC) allows patients to identify their stool form using seven different images with accompanying written descriptors. Stool form was found to correlate better than stool frequency with whole-gut transit as measured by a radio-opaque marker study. This score is widely used in order to verify the presence of a constipation and to evaluate the therapeutic impact of various treatments. In our clinical practice, we was strongly surprised by the facility and the great precision of the patients to report their stool form, meaning that they usually and daily verify these stools. We wanted to precise the goals of a such attitude. Two questionnaires were proposed to healthy and voluntary subjects. Q1 was supposedly presented in order to verify the sensibility of a French version of BSC in a healthy population. Thus, Q1 precised the difficulties or not to understand pictures and written descriptors, asked about exhaustive analysis by means of BSC of stool form and bowel condition. All subjects with history of ano-rectal disorders or specific treatment for bowel dysfunction were excluded. After Q1 fulfilled, Q2 was proposed to the subjects. Q2 was designed to precise the goals of the patient when he look at his stool and the frequency of such an investigation. Finally a specific question concerning the subject opinion about this behavior in terms of bothersome, shame, or metaphysic interrogation. Eighty-five healthy subjects were recruited (42 female and 43 male). Mean age was 37.2 (sd = 15.7). Mean score of BCS was 2.07 (sd =1.05) (2.07 for female and 1.81 for male, P = 0.22). Number of categories of stool form was only 1 in 40%, 2 categories in 31%, 3 in 19%, 4 in 10%. Presence of a constipation defined by category 1 or 2 was found in 17% (23% in F, 12% in M, P = 0.075). Precision of BSC was noted as excellent in 68%, moderated in 18% and poor in 14%. BSC was considered as easy to use in 75%. Frequency of inspection of feces was systematic for 37%, 1/2 in 20%, 1/3 in 13%, 1 to 4 per month in 30%. The goal of inspection was "routine" in 54%, and devoted to track down any pathological condition ("self examination") in 46%. Eighty percent of the subjects considered having no shame or specific reticence and only 17% of them, had some interrogations concerning the real rational of such an inspection. BSC is a useful tool widely used in routine practice, helping to the diagnosis of constipation and the control of the different therapeutic strategies. There is no psychological barriers or metaphysics inconveniences for its use. But it seems legitimate to understand the hidden reasons of such a behavior with unconscious purposes reflecting the intimal nature of the humans. 3. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Textbook Multigrid Efficiency for Leading Edge Stagnation

NASA Technical Reports Server (NTRS)

Diskin, Boris; Thomas, James L.; Mineck, Raymond E.

2004-01-01

A multigrid solver is defined as having textbook multigrid efficiency (TME) if the solutions to the governing system of equations are attained in a computational work which is a small (less than 10) multiple of the operation count in evaluating the discrete residuals. TME in solving the incompressible inviscid fluid equations is demonstrated for leading-edge stagnation flows. The contributions of this paper include (1) a special formulation of the boundary conditions near stagnation allowing convergence of the Newton iterations on coarse grids, (2) the boundary relaxation technique to facilitate relaxation and residual restriction near the boundaries, (3) a modified relaxation scheme to prevent initial error amplification, and (4) new general analysis techniques for multigrid solvers. Convergence of algebraic errors below the level of discretization errors is attained by a full multigrid (FMG) solver with one full approximation scheme (FAS) cycle per grid. Asymptotic convergence rates of the FAS cycles for the full system of flow equations are very fast, approaching those for scalar elliptic equations.

Textbook Multigrid Efficiency for Leading Edge Stagnation

NASA Technical Reports Server (NTRS)

Diskin, Boris; Thomas, James L.; Mineck, Raymond E.

2004-01-01

A multigrid solver is defined as having textbook multigrid efficiency (TME) if the solutions to the governing system of equations are attained in a computational work which is a small (less than 10) multiple of the operation count in evaluating the discrete residuals. TME in solving the incompressible inviscid fluid equations is demonstrated for leading- edge stagnation flows. The contributions of this paper include (1) a special formulation of the boundary conditions near stagnation allowing convergence of the Newton iterations on coarse grids, (2) the boundary relaxation technique to facilitate relaxation and residual restriction near the boundaries, (3) a modified relaxation scheme to prevent initial error amplification, and (4) new general analysis techniques for multigrid solvers. Convergence of algebraic errors below the level of discretization errors is attained by a full multigrid (FMG) solver with one full approximation scheme (F.4S) cycle per grid. Asymptotic convergence rates of the F.4S cycles for the full system of flow equations are very fast, approaching those for scalar elliptic equations.

A method of predicting flow rates required to achieve anti-icing performance with a porous leading edge ice protection system

NASA Technical Reports Server (NTRS)

Kohlman, D. L.; Albright, A. E.

1983-01-01

An analytical method was developed for predicting minimum flow rates required to provide anti-ice protection with a porous leading edge fluid ice protection system. The predicted flow rates compare with an average error of less than 10 percent to six experimentally determined flow rates from tests in the NASA Icing Research Tunnel on a general aviation wing section.

A spatially adaptive total variation regularization method for electrical resistance tomography

NASA Astrophysics Data System (ADS)

Song, Xizi; Xu, Yanbin; Dong, Feng

2015-12-01

The total variation (TV) regularization method has been used to solve the ill-posed inverse problem of electrical resistance tomography (ERT), owing to its good ability to preserve edges. However, the quality of the reconstructed images, especially in the flat region, is often degraded by noise. To optimize the regularization term and the regularization factor according to the spatial feature and to improve the resolution of reconstructed images, a spatially adaptive total variation (SATV) regularization method is proposed. A kind of effective spatial feature indicator named difference curvature is used to identify which region is a flat or edge region. According to different spatial features, the SATV regularization method can automatically adjust both the regularization term and regularization factor. At edge regions, the regularization term is approximate to the TV functional to preserve the edges; in flat regions, it is approximate to the first-order Tikhonov (FOT) functional to make the solution stable. Meanwhile, the adaptive regularization factor determined by the spatial feature is used to constrain the regularization strength of the SATV regularization method for different regions. Besides, a numerical scheme is adopted for the implementation of the second derivatives of difference curvature to improve the numerical stability. Several reconstruction image metrics are used to quantitatively evaluate the performance of the reconstructed results. Both simulation and experimental results indicate that, compared with the TV (mean relative error 0.288, mean correlation coefficient 0.627) and FOT (mean relative error 0.295, mean correlation coefficient 0.638) regularization methods, the proposed SATV (mean relative error 0.259, mean correlation coefficient 0.738) regularization method can endure a relatively high level of noise and improve the resolution of reconstructed images.

Accurate characterisation of hole size and location by projected fringe profilometry

NASA Astrophysics Data System (ADS)

Wu, Yuxiang; Dantanarayana, Harshana G.; Yue, Huimin; Huntley, Jonathan M.

2018-06-01

The ability to accurately estimate the location and geometry of holes is often required in the field of quality control and automated assembly. Projected fringe profilometry is a potentially attractive technique on account of being non-contacting, of lower cost, and orders of magnitude faster than the traditional coordinate measuring machine. However, we demonstrate in this paper that fringe projection is susceptible to significant (hundreds of µm) measurement artefacts in the neighbourhood of hole edges, which give rise to errors of a similar magnitude in the estimated hole geometry. A mechanism for the phenomenon is identified based on the finite size of the imaging system’s point spread function and the resulting bias produced near to sample discontinuities in geometry and reflectivity. A mathematical model is proposed, from which a post-processing compensation algorithm is developed to suppress such errors around the holes. The algorithm includes a robust and accurate sub-pixel edge detection method based on a Fourier descriptor of the hole contour. The proposed algorithm was found to reduce significantly the measurement artefacts near the hole edges. As a result, the errors in estimated hole radius were reduced by up to one order of magnitude, to a few tens of µm for hole radii in the range 2–15 mm, compared to those from the uncompensated measurements.

Predicting Near Edge X-ray Absorption Spectra with the Spin-Free Exact-Two-Component Hamiltonian and Orthogonality Constrained Density Functional Theory.

PubMed

Verma, Prakash; Derricotte, Wallace D; Evangelista, Francesco A

2016-01-12

Orthogonality constrained density functional theory (OCDFT) provides near-edge X-ray absorption (NEXAS) spectra of first-row elements within one electronvolt from experimental values. However, with increasing atomic number, scalar relativistic effects become the dominant source of error in a nonrelativistic OCDFT treatment of core-valence excitations. In this work we report a novel implementation of the spin-free exact-two-component (X2C) one-electron treatment of scalar relativistic effects and its combination with a recently developed OCDFT approach to compute a manifold of core-valence excited states. The inclusion of scalar relativistic effects in OCDFT reduces the mean absolute error of second-row elements core-valence excitations from 10.3 to 2.3 eV. For all the excitations considered, the results from X2C calculations are also found to be in excellent agreement with those from low-order spin-free Douglas-Kroll-Hess relativistic Hamiltonians. The X2C-OCDFT NEXAS spectra of three organotitanium complexes (TiCl4, TiCpCl3, TiCp2Cl2) are in very good agreement with unshifted experimental results and show a maximum absolute error of 5-6 eV. In addition, a decomposition of the total transition dipole moment into partial atomic contributions is proposed and applied to analyze the nature of the Ti pre-edge transitions in the three organotitanium complexes.

Coexistence of esophageal blue nevus, hair follicles and basaloid sqamous carcinoma: a case report.

PubMed

Wang, Dong-Guan; Li, Xin-Gong; Gao, Hong; Sun, Xi-Yin; Zhou, Xiao-Qiu

2008-07-14

We present the case of a 57-year-old man who underwent esophagectomy for esophageal carcinoma found at barium meal and gastroscopic examination. He was diagnosed as esophageal basaloid squamous carcinoma (BSC) and gastric stromal tumor, which were associated with focal proliferation of melanocytes/pigmentophages and hair follicles in esophageal mucosa. Melanocytic hyperplasia (melanocytosis) has previously been recognized as an occasional reactive lesion, which can accompany esophageal inflammation and invasive squamous carcinoma. The present case is unusual because of its hyperplasia of not only melanocytes but also hair follicles. To our knowledge, this is the first report of esophageal blue nevus and hair follicle coexisting with BSC.

[The balanced scorecard--applications in a radiology department].

PubMed

Maurer, M H; Teichgräber, U; Kröncke, T J; Hamm, B; Lemke, A J

2012-12-01

The balanced scorecard (BSC) represents a comprehensive management tool for organizations with the aim to focus all activities on a chosen strategy. Targets for various perspectives of the environment such as the customer, financial, process, and potential perspective are linked with concrete measures, and cause-effect relationships between the objectives are analyzed. This article shows that the BSC can also be used for the comprehensive control of a radiology department and thus provides a meaningful contribution in organizing the various diagnostic and treatment services, the management of complex clinical environment and can be of help with the tasks in research and teaching. © Georg Thieme Verlag KG Stuttgart · New York.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerrigan, P.

This report describes a research study that was conducted by the Building Science Corporation (BSC) Building America Research Team. BSC seeks to research and report on the field monitoring of the performance of in-situ supplemental dehumidification systems in low energy, high performance homes in a hot-humid climate. The purpose of this research project was to observe and compare the humidity control performance. Specifically, the study sought to compare the interior conditions and mechanical systems operation between two distinct groups of houses; homes with a supplemental dehumidifier installed in addition to HVAC system, and homes without any supplemental dehumidification. The subjectsmore » of the study were 10 single-family, new construction homes in New Orleans, LA.« less

Error reduction study employing a pseudo-random binary sequence for use in acoustic pyrometry of gases

NASA Astrophysics Data System (ADS)

Ewan, B. C. R.; Ireland, S. N.

2000-12-01

Acoustic pyrometry uses the temperature dependence of sound speed in materials to measure temperature. This is normally achieved by measuring the transit time for a sound signal over a known path length and applying the material relation between temperature and velocity to extract an "average" temperature. Sources of error associated with the measurement of mean transit time are discussed in implementing the technique in gases, one of the principal causes being background noise in typical industrial environments. A number of transmitted signal and processing strategies which can be used in the area are examined and the expected error in mean transit time associated with each technique is quantified. Transmitted signals included pulses, pure frequencies, chirps, and pseudorandom binary sequences (prbs), while processing involves edge detection and correlation. Errors arise through the misinterpretation of the positions of edge arrival or correlation peaks due to instantaneous deviations associated with background noise and these become more severe as signal to noise amplitude ratios decrease. Population errors in the mean transit time are estimated for the different measurement strategies and it is concluded that PRBS combined with correlation can provide the lowest errors when operating in high noise environments. The operation of an instrument based on PRBS transmitted signals is described and test results under controlled noise conditions are presented. These confirm the value of the strategy and demonstrate that measurements can be made with signal to noise amplitude ratios down to 0.5.

Accuracy and convergence of coupled finite-volume/Monte Carlo codes for plasma edge simulations of nuclear fusion reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ghoos, K., E-mail: kristel.ghoos@kuleuven.be; Dekeyser, W.; Samaey, G.

2016-10-01

The plasma and neutral transport in the plasma edge of a nuclear fusion reactor is usually simulated using coupled finite volume (FV)/Monte Carlo (MC) codes. However, under conditions of future reactors like ITER and DEMO, convergence issues become apparent. This paper examines the convergence behaviour and the numerical error contributions with a simplified FV/MC model for three coupling techniques: Correlated Sampling, Random Noise and Robbins Monro. Also, practical procedures to estimate the errors in complex codes are proposed. Moreover, first results with more complex models show that an order of magnitude speedup can be achieved without any loss in accuracymore » by making use of averaging in the Random Noise coupling technique.« less

Magnetic configuration effects on the edge heat flux in the limiter plasma on W7-X measured using the infrared camera and the combined probe

NASA Astrophysics Data System (ADS)

P, DREWS; H, NIEMANN; J, COSFELD; Y, GAO; J, GEIGER; O, GRULKE; M, HENKEL; D, HÖSCHEN; K, HOLLFELD; C, KILLER; A, KRÄMER-FLECKEN; Y, LIANG; S, LIU; D, NICOLAI; O, NEUBAUER; M, RACK; B, SCHWEER; G, SATHEESWARAN; L, RUDISCHHAUSER; N, SANDRI; N, WANG; the W7-X Team

2018-05-01

Controlling the heat and particle fluxes in the plasma edge and on the plasma facing components is important for the safe and effective operation of every magnetically confined fusion device. This was attempted on Wendelstein 7-X in the first operational campaign, with the modification of the magnetic configuration by use of the trim coils and tuning the field coil currents, commonly named iota scan. Ideally, the heat loads on the five limiters are equal. However, they differ between each limiter and are non-uniform, due to the (relatively small) error fields caused by the misalignment of components. It is therefore necessary to study the influence of the configuration changes on the transport of heat and particles in the plasma edge caused by the application of error fields and the change of the magnetic configuration. In this paper the up-stream measurements conducted with the combined probe are compared to the downstream measurements with the DIAS infrared camera on the limiter.

Visual navigation using edge curve matching for pinpoint planetary landing

NASA Astrophysics Data System (ADS)

Cui, Pingyuan; Gao, Xizhen; Zhu, Shengying; Shao, Wei

2018-05-01

Pinpoint landing is challenging for future Mars and asteroid exploration missions. Vision-based navigation scheme based on feature detection and matching is practical and can achieve the required precision. However, existing algorithms are computationally prohibitive and utilize poor-performance measurements, which pose great challenges for the application of visual navigation. This paper proposes an innovative visual navigation scheme using crater edge curves during descent and landing phase. In the algorithm, the edge curves of the craters tracked from two sequential images are utilized to determine the relative attitude and position of the lander through a normalized method. Then, considering error accumulation of relative navigation, a method is developed. That is to integrate the crater-based relative navigation method with crater-based absolute navigation method that identifies craters using a georeferenced database for continuous estimation of absolute states. In addition, expressions of the relative state estimate bias are derived. Novel necessary and sufficient observability criteria based on error analysis are provided to improve the navigation performance, which hold true for similar navigation systems. Simulation results demonstrate the effectiveness and high accuracy of the proposed navigation method.

The influences of nursing education on the socialization and professional working relationships of Canadian practical and degree nursing students: A critical analysis.

PubMed

Limoges, Jacqueline; Jagos, Kim

2015-10-01

Little evidence exists about how education influences the ways that registered nurses (RN) and registered practical nurses (RPN) negotiate their professional work relationships. This qualitative study used interviews and reflective writing from 250 Bachelor of Science in Nursing (BScN) and Practical Nursing (PN) students to explore how education constructs intraprofessional relations. The data were collected after two joint BScN/PN education events - one held in the first semester and one in the fourth semester. The findings reveal how education conveys and establishes dominant discourses about the tiers in nursing and the boundary work and professional closure strategies used by the two groups. In addition, although the two education programs are largely segregated and education about how to work with each other is rarely discussed, PN and BScN students strive to understand the differences and perceived inequities between the two designations of nurse. The data show how students attempt to reconcile the tensions and disjunctures they experience from the power relations by activating socially constructed and hegemonic positions that have been problematic for nursing. Findings will assist nurse educators to understand how education can be used to negotiate professional boundaries and working relationships that foster equity and social inclusion. Copyright © 2015 Elsevier Ltd. All rights reserved.

Designing a balanced scorecard for a tertiary care hospital in Pakistan: a modified Delphi group exercise.

PubMed

Rabbani, Fauziah; Jafri, Syed M Wasim; Abbas, Farhat; Shah, Mairaj; Azam, Syed Iqbal; Shaikh, Babar Tasneem; Brommels, Mats; Tomson, Goran

2010-01-01

Balanced Scorecards (BSC) are being implemented in high income health settings linking organizational strategies with performance data. At this private university hospital in Pakistan an elaborate information system exists. This study aimed to make best use of available data for better performance management. Applying the modified Delphi technique an expert panel of clinicians and hospital managers reduced a long list of indicators to a manageable size. Indicators from existing documents were evaluated for their importance, scientific soundness, appropriateness to hospital's strategic plan, feasibility and modifiability. Panel members individually rated each indicator on a scale of 1-9 for the above criteria. Median scores were assigned. Of an initial set of 50 indicators, 20 were finally selected to be assigned to the four BSC quadrants. These were financial (n = 4), customer or patient (n = 4), internal business or quality of care (n = 7) and innovation/learning or employee perspectives (n = 5). A need for stringent definitions, international benchmarking and standardized measurement methods was identified. BSC compels individual clinicians and managers to jointly work towards improving performance. This scorecard is now ready to be implemented by this hospital as a performance management tool for monitoring indicators, addressing measurement issues and enabling comparisons with hospitals in other settings. Copyright 2010 John Wiley & Sons, Ltd.

New Whole-House Solutions Case Study: HVAC Design Strategy for a Hot-Humid Production Builder, Houston, Texas

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Building Science Corporation (BSC) worked directly with the David Weekley Homes - Houston division to develop a cost-effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses in preparation for the upcoming code changes in 2015. The following research questions were addressed by this research project: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story singlemore » family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost? BSC and the builder developed a duct design strategy that employs a system of dropped ceilings and attic coffers for moving the ductwork from the vented attic to conditioned space. The furnace has been moved to either a mechanical closet in the conditioned living space or a coffered space in the attic.« less

A Comprehensive Study of Gridding Methods for GPS Horizontal Velocity Fields

NASA Astrophysics Data System (ADS)

Wu, Yanqiang; Jiang, Zaisen; Liu, Xiaoxia; Wei, Wenxin; Zhu, Shuang; Zhang, Long; Zou, Zhenyu; Xiong, Xiaohui; Wang, Qixin; Du, Jiliang

2017-03-01

Four gridding methods for GPS velocities are compared in terms of their precision, applicability and robustness by analyzing simulated data with uncertainties from 0.0 to ±3.0 mm/a. When the input data are 1° × 1° grid sampled and the uncertainty of the additional error is greater than ±1.0 mm/a, the gridding results show that the least-squares collocation method is highly robust while the robustness of the Kriging method is low. In contrast, the spherical harmonics and the multi-surface function are moderately robust, and the regional singular values for the multi-surface function method and the edge effects for the spherical harmonics method become more significant with increasing uncertainty of the input data. When the input data (with additional errors of ±2.0 mm/a) are decimated by 50% from the 1° × 1° grid data and then erased in three 6° × 12° regions, the gridding results in these three regions indicate that the least-squares collocation and the spherical harmonics methods have good performances, while the multi-surface function and the Kriging methods may lead to singular values. The gridding techniques are also applied to GPS horizontal velocities with an average error of ±0.8 mm/a over the Chinese mainland and the surrounding areas, and the results show that the least-squares collocation method has the best performance, followed by the Kriging and multi-surface function methods. Furthermore, the edge effects of the spherical harmonics method are significantly affected by the sparseness and geometric distribution of the input data. In general, the least-squares collocation method is superior in terms of its robustness, edge effect, error distribution and stability, while the other methods have several positive features.

Association of progression-free survival, overall survival, and patient-reported outcomes by skin toxicity and KRAS status in patients receiving panitumumab monotherapy.

PubMed

Peeters, Marc; Siena, Salvatore; Van Cutsem, Eric; Sobrero, Alberto; Hendlisz, Alain; Cascinu, Stefano; Kalofonos, Haralabos; Devercelli, Giovanna; Wolf, Michael; Amado, Rafael G

2009-04-01

The authors explored the association of skin toxicity (ST) severity as measured by patient-reported ST and Common Terminology Criteria for Adverse Events (CTCAE) grading with efficacy of panitumumab, a fully human antiepidermal growth factor receptor antibody, from a phase 3 metastatic colorectal cancer (CRC) trial. Patients were randomized to panitumumab plus best supportive care (BSC) vs BSC alone. ST by modified National Cancer Institute CTCAE v3.0 and modified Dermatology Life Quality Index (mDLQI), health-related quality of life (HRQOL), and CRC symptoms were measured. ST was analyzed using a landmark approach. Associations by KRAS mutational status were also assessed. Of 463 patients, 208 of 231 (90%) panitumumab patients and 184 of 232 (79%) BSC patients had > or = 1 postbaseline patient-reported outcome (PRO) assessment. Panitumumab patients with more severe ST had significantly longer overall survival (OS) (grade 2-4:grade 1; hazard ratio, 0.60; P = .0033). Lower mDLQI scores (< 67; more bothersome ST) were associated with longer OS (Cox model, P < .0001). Similar results were observed with progression-free survival (PFS). An inverse relation between mDLQI and HRQOL scores was observed, suggesting that ST bother correlated with better HRQOL. KRAS and PRO data were available in 363 patients (188 panitumumab; 175 BSC). Longer OS was associated with lower mDLQI scores, regardless of KRAS status. Longer PFS was associated with more severe ST (lower mDLQI scores and higher CTCAE grade ST) in patients with wild-type (WT) KRAS tumors, but not in patients with mutant KRAS tumors. More severe ST, by both clinical grading and PRO, is associated with better CRC symptoms and HRQOL and with longer OS and PFS among panitumumab-treated patients. The associations for PFS were more pronounced in patients with WT KRAS tumors. (c) 2009 American Cancer Society

Cost-Effectiveness Analysis of Tyrosine Kinase Inhibitors for Patients with Advanced Gastrointestinal Stromal Tumors.

PubMed

Nerich, Virginie; Fleck, Camille; Chaigneau, Loïc; Isambert, Nicolas; Borg, Christophe; Kalbacher, Elsa; Jary, Marine; Simon, Pauline; Pivot, Xavier; Blay, Jean-Yves; Limat, Samuel

2017-01-01

The management of advanced gastrointestinal stromal tumors (GISTs) has been modified considerably by the availability of costly tyrosine kinase inhibitors (TKIs); however, the best therapeutic sequence in terms of cost and effectiveness remains unknown. The aim of this study was to compare four potential strategies (reflecting the potential daily practice), each including imatinib 400 mg/day, as first-line treatment: S1 (imatinib 400 /best supportive care [BSC]); S2 (imatinib 400 /imatinib 800 /BSC); S3 (imatinib 400 /sunitinib/BSC); and S4 (imatinib 400 /imatinib 800 /sunitinib/BSC). A Markov model was developed with a hypothetical cohort of patients and a lifetime horizon. Transition probabilities were estimated from the results of clinical trials. The analysis was performed from the French payer perspective, and only direct medical costs were included. Clinical and economic parameters were discounted, and the robustness of results was assessed. The least costly and effective strategy was S1, at a cost of €65,744 for 32.9 life months (reference). S3 was the most cost-effective strategy, with an incremental cost-effectiveness ratio (ICER) of €48,277/life-year saved (LYS). S2 was dominated, and S4 yielded an ICER of €363,320/LYS compared with S3. Sensitivity analyses confirmed the robustness of these results; however, when taking into account a price reduction of 80 % for imatinib, S2 and S4 become the most cost-effective strategies. Our approach is innovative to the extent that our analysis takes into account the sequential application of TKIs. The results suggest that the S1 strategy is the best cost-effective strategy, but a price reduction of imatinib impacts on the results. This approach must continue, including new drugs and their impact on the quality of life of patients with advanced GISTs.

Survival analysis of platinum-refractory patients with advanced esophageal cancer treated with docetaxel or best supportive care alone: a retrospective study.

PubMed

Moriwaki, T; Kajiwara, T; Matsumoto, T; Suzuki, H; Hiroshima, Y; Matsuda, K; Hirai, S; Yamamoto, Y; Yamada, T; Sugaya, A; Kobayashi, M; Endo, S; Ishige, K; Nishina, T; Hyodo, I

2014-01-01

The survival benefit of second-line chemotherapy with docetaxel in platinum-refractory patients with advanced esophageal cancer (AEC) remains unclear. A retrospective analysis of AEC patients with Eastern Cooperative Oncology Group performance status (PS)≤2 was performed, and major organ functions were preserved, who determined to receive docetaxel or best supportive care (BSC) alone after failure of platinum-based chemotherapy. The post-progression survival (PPS), defined as survival time after disease progression following platinum-based chemotherapy, was analyzed by multivariate Cox regression analysis using factors identified as significant in univariate analysis of various 20 characteristics (age, sex, PS, primary tumor location, etc) including Glasgow prognostic score (GPS), which is a well-known prognostic factor in many malignant tumors. Sixty-six and 45 patients were determined to receive docetaxel and BSC between January 2007 and December 2011, respectively. The median PPS was 5.4 months (95% confidence interval [CI] 4.8-6.0) in the docetaxel group and 3.3 months (95% CI 2.5-4.0) in the BSC group (hazard ratio [HR] 0.56, 95% CI 0.38-0.84, P=0.005). Univariate analysis revealed six significant factors: treatment, PS, GPS, number of metastatic organs, liver metastasis, and bone metastasis. Multivariate analysis including these significant factors revealed three independent prognostic factors: docetaxel treatment (HR 0.62, 95% CI 0.39-0.99, P=0.043), better GPS (HR 0.61, 95% CI 0.46-0.81, P=0.001), and no bone metastasis (HR 0.31, 95% CI 0.15-0.68, P=0.003). There was a trend for PPS in favor of the docetaxel group compared with patients who refused docetaxel treatment in the BSC group (adjusted HR 0.61, 95% CI 0.29-1.29, P=0.20). Docetaxel treatment may have prolonged survival in platinum-refractory patients with AEC. © 2014 International Society for Diseases of the Esophagus.

The Denitrification Characteristics of Pseudomonas stutzeri SC221-M and Its Application to Water Quality Control in Grass Carp Aquaculture

PubMed Central

Zhang, Xiaoping; Zheng, Jiajia; Peng, Lisha; Sun, Jiandong; Zhu, Haiyan; Wang, Yibing; Li, Weifen; Wu, Xuexiang; Wu, Di

2014-01-01

To reduce ammonium and nitrite in aquaculture water, an isolate of the denitrifying bacterium Pseudomonas stutzeri, SC221-M, was obtained. The effects of various nitrogen and carbon sources, the ratio of carbon to nitrogen and temperature on bacterial growth, denitrification rates and the expression levels of nirS and nosZ in SC221-M were studied. The following conditions were determined to be optimal for growth and denitrification in SC221-M: NaNO2 as the nitrogen source, sodium citrate as the carbon source, a carbon to nitrogen ratio range of 4–8, and a temperature range of 20–35°C. Subsequently, SC221-M and the Bacillus cereus BSC24 strain were selected to generate microbial preparations. The results showed that addition of the microbial preparations decreased various hydrochemical parameters, including total dissolved solids, ammonium, nitrite, total nitrogen and the chemical oxygen demand. Nitrogen removal rates were highest on day 9; the removal rates of BSC24, SC221-M, a mixed preparation and a 3× mixed preparation were 24.5%, 26.6%, 53.9% and 53.4%, respectively. The mixed preparation (SC221-M+BSC24) was more effective at removing nitrogen than either the SC221-M or BSC24 preparation. Roche 454 pyrosequencing and subsequent analysis indicated that the control and other groups formed separate clusters, and the microbial community structure in the water changed significantly after the addition of microbial preparations. These results indicate that the addition of microbial preparations can improve both the water quality and microbial community structure in an experimental aquaculture system. P. stutzeri strain SC221-M and its related microbial preparations are potential candidates for the regulation of water quality in commercial aquaculture systems. PMID:25489740

Budget impact analysis of biosimilar infliximab (CT-P13) for the treatment of rheumatoid arthritis in six Central and Eastern European countries.

PubMed

Brodszky, Valentin; Baji, Petra; Balogh, Orsolya; Péntek, Márta

2014-05-01

The first biosimilar monoclonal antibody (infliximab, CT-P13) was registered by the European Medicines Agency in 2013 for the treatment of several inflammatory conditions including rheumatoid arthritis (RA). Biosimilar infliximab is first being marketed in the Central and Eastern European countries. This paper presents the estimated budget impact of the introduction of biosimilar infliximab in RA over a 3-year time period in six selected countries, namely Bulgaria, the Czech Republic, Hungary, Poland, Romania and Slovakia. A prevalence-based model was constructed for budget impact analysis. Two scenarios were compared to the reference scenario (RSc) where no biosimilar infliximab is available: biosimilar scenario 1 (BSc1), where interchanging the originator infliximab with biosimilar infliximab is disallowed, and only patients who start new biological therapy are allowed to use biosimilar infliximab; as well as biosimilar scenario 2 (BSc2), where interchanging the originator infliximab with biosimilar infliximab is allowed, and 80% of patients treated with originator infliximab are interchanged to biosimilar infliximab. Compared to the RSc, the net savings are estimated to be €15.3 or €20.8 M in BSc1 and BSc2, respectively, over the 3 years. If budget savings were spent on reimbursement of additional biosimilar infliximab treatment, approximately 1,200 or 1,800 more patients could be treated in the six countries within 3 years in the two biosimilar scenarios, respectively. The actual saving is most sensitive to the assumption of the acquisition cost of the biosimilar drug and to the initial number of patients treated with biological therapy. The study focused on one indication (RA) and demonstrated that the introduction of biosimilar infliximab can lead to substantial budget savings in health care budgets. Further savings are expected for other indications where biosimilar medicines are implemented.

Configuring Balanced Scorecards for Measuring Health System Performance: Evidence from 5 Years' Evaluation in Afghanistan

PubMed Central

Edward, Anbrasi; Kumar, Binay; Kakar, Faizullah; Salehi, Ahmad Shah; Burnham, Gilbert; Peters, David H.

2011-01-01

Background In 2004, Afghanistan pioneered a balanced scorecard (BSC) performance system to manage the delivery of primary health care services. This study examines the trends of 29 key performance indicators over a 5-year period between 2004 and 2008. Methods and Findings Independent evaluations of performance in six domains were conducted annually through 5,500 patient observations and exit interviews and 1,500 provider interviews in >600 facilities selected by stratified random sampling in each province. Generalized estimating equation (GEE) models were used to assess trends in BSC parameters. There was a progressive improvement in the national median scores scaled from 0–100 between 2004 and 2008 in all six domains: patient and community satisfaction of services (65.3–84.5, p<0.0001); provider satisfaction (65.4–79.2, p<0.01); capacity for service provision (47.4–76.4, p<0.0001); quality of services (40.5–67.4, p<0.0001); and overall vision for pro-poor and pro-female health services (52.0–52.6). The financial domain also showed improvement until 2007 (84.4–95.7, p<0.01), after which user fees were eliminated. By 2008, all provinces achieved the upper benchmark of national median set in 2004. Conclusions The BSC has been successfully employed to assess and improve health service capacity and service delivery using performance benchmarking during the 5-year period. However, scorecard reconfigurations are needed to integrate effectiveness and efficiency measures and accommodate changes in health systems policy and strategy architecture to ensure its continued relevance and effectiveness as a comprehensive health system performance measure. The process of BSC design and implementation can serve as a valuable prototype for health policy planners managing performance in similar health care contexts. Please see later in the article for the Editors' Summary PMID:21814499

Nonaxisymmetric modelling in BOUT++; toward global edge fluid turbulence in stellarators

NASA Astrophysics Data System (ADS)

Shanahan, Brendan; Hill, Peter; Dudson, Ben

2016-10-01

As Wendelstein 7-X has been optimized for neoclassical transport, turbulent transport could potentially become comparable to neoclassical losses. Furthermore, the imminent installation of an island divertor merits global edge modelling to determine heat flux profiles and the efficacy of the system. Currently, however, nonaxisymmetric edge plasma modelling is limited to either steady state (non-turbulent) transport modelling, or computationally expensive gyrokinetics. The implementation of the Flux Coordinate Independent (FCI) approach to parallel derivatives has allowed the extension of the BOUT++ edge fluid turbulence framework to nonaxisymmetric geometries. Here we first investigate the implementation of the FCI method in BOUT++ by modelling diffusion equations in nonaxisymmetric geometries with and without boundary interaction, and quantify the inherent error. We then present the results of non-turbulent transport modelling and compare with analytical theory. The ongoing extension of BOUT++ to nonaxisymmetric configurations, and the prospects of stellarator edge fluid turbulence simulations will be discussed.

Contour Tracking with a Spatio-Temporal Intensity Moment.

PubMed

Demi, Marcello

2016-06-01

Standard edge detection operators such as the Laplacian of Gaussian and the gradient of Gaussian can be used to track contours in image sequences. When using edge operators, a contour, which is determined on a frame of the sequence, is simply used as a starting contour to locate the nearest contour on the subsequent frame. However, the strategy used to look for the nearest edge points may not work when tracking contours of non isolated gray level discontinuities. In these cases, strategies derived from the optical flow equation, which look for similar gray level distributions, appear to be more appropriate since these can work with a lower frame rate than that needed for strategies based on pure edge detection operators. However, an optical flow strategy tends to propagate the localization errors through the sequence and an additional edge detection procedure is essential to compensate for such a drawback. In this paper a spatio-temporal intensity moment is proposed which integrates the two basic functions of edge detection and tracking.

Sampling of Stochastic Input Parameters for Rockfall Calculations and for Structural Response Calculations Under Vibratory Ground Motion

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. Gross

2004-09-01

The purpose of this scientific analysis is to define the sampled values of stochastic (random) input parameters for (1) rockfall calculations in the lithophysal and nonlithophysal zones under vibratory ground motions, and (2) structural response calculations for the drip shield and waste package under vibratory ground motions. This analysis supplies: (1) Sampled values of ground motion time history and synthetic fracture pattern for analysis of rockfall in emplacement drifts in nonlithophysal rock (Section 6.3 of ''Drift Degradation Analysis'', BSC 2004 [DIRS 166107]); (2) Sampled values of ground motion time history and rock mechanical properties category for analysis of rockfall inmore » emplacement drifts in lithophysal rock (Section 6.4 of ''Drift Degradation Analysis'', BSC 2004 [DIRS 166107]); (3) Sampled values of ground motion time history and metal to metal and metal to rock friction coefficient for analysis of waste package and drip shield damage to vibratory motion in ''Structural Calculations of Waste Package Exposed to Vibratory Ground Motion'' (BSC 2004 [DIRS 167083]) and in ''Structural Calculations of Drip Shield Exposed to Vibratory Ground Motion'' (BSC 2003 [DIRS 163425]). The sampled values are indices representing the number of ground motion time histories, number of fracture patterns and rock mass properties categories. These indices are translated into actual values within the respective analysis and model reports or calculations. This report identifies the uncertain parameters and documents the sampled values for these parameters. The sampled values are determined by GoldSim V6.04.007 [DIRS 151202] calculations using appropriate distribution types and parameter ranges. No software development or model development was required for these calculations. The calculation of the sampled values allows parameter uncertainty to be incorporated into the rockfall and structural response calculations that support development of the seismic scenario for the Total System Performance Assessment for the License Application (TSPA-LA). The results from this scientific analysis also address project requirements related to parameter uncertainty, as specified in the acceptance criteria in ''Yucca Mountain Review Plan, Final Report'' (NRC 2003 [DIRS 163274]). This document was prepared under the direction of ''Technical Work Plan for: Regulatory Integration Modeling of Drift Degradation, Waste Package and Drip Shield Vibratory Motion and Seismic Consequences'' (BSC 2004 [DIRS 170528]) which directed the work identified in work package ARTM05. This document was prepared under procedure AP-SIII.9Q, ''Scientific Analyses''. There are no specific known limitations to this analysis.« less

Mycobiota of biological soil crusts in the Negev desert, Israel - differences on a regional and local scale

NASA Astrophysics Data System (ADS)

Grishkan, I.; Zaady, E.; Kidron, G.

2012-04-01

On a regional scale, we examined variations in microfungal communities inhabiting the biological soil crusts (BSC) and non-crusted soil of the northern and central Negev desert in 10 locations along a southward rainfall gradient (from 325 mm to 81 mm of annual rainfall). A total of 87 species from 49 genera were isolated using the soil dilution plate method. The mycobiota of BSC (80 species) was characterized by dominance of melanin-containing fungi, remarkable contribution of sexual Ascomycota, and low abundance of the typical soil genera Penicillium and Aspergillus. Morphological adaptations to the stressful desert environment were expressed in the prevalence of dark-colored microfungi with large, many-celled spores in the localities of the "drier" part of the rainfall gradient and in dark thick-walled fruit bodies of sexual ascomycetes. The abundance of melanin-containing species with multicellular spores was the only characteristic showed a highly significant (negative) correlation with the rainfall amount. We assume that the main factor influencing the content of these species was the latitudinal position of the locations, determining also the intensity of solar (UV) radiation. In the BSC communities, the xeric "desert" component (melanics, slow-reproducing fungi with large, thick-walled spores) was significantly more pronounced and the mesic "forest" component (Penicillium, fast-reproducing fungi with small, light-colored, and thin-walled spores) was much less represented than in the non-crusted shrub communities. In BSC, density of fungal isolates which can be considered an indirect characteristic of fungal biomass was significantly lower than in the non-crusted soil. Cluster analysis indicated that in most cases, the BSC and shrub localities, separated only by a few meters or less, differed on microfungal community structure much more significantly than BSC or shrub localities in the distance of tens of kilometers. The results of this analysis, together with the fact that the rainfall amount weakly influenced spatial variations of the most observed mycological characteristics, indicated that microenvironmental (edaphic) factors played a more essential role in the formation of studied communities than macroenvironmental (climatic) factors. On a local scale, we studied variations in microfungal communities from different crust types (cyanobacterial - moss-dominated) at the Nizzana research station, the western Negev Desert, and their relationship with moisture retention time and intensity of solar radiation. A total of 78 species from 48 genera was isolated. Microfungal communities in the Nizzana crusts were also dominated by melanin-containing species with large, thick-walled and multi-celled conidia. Abundance of this xeric group significantly increased with the increase of radiation intensity, while abundance of mesic Penicillium spp. and Zygomycota displayed the opposite trend. Density of microfungal isolates showed significant positive non-linear relationship with moisture retention time. The moss dominated crust differed markedly from the cyanobacterial crusts on species relative abundances, diversity level, and isolate density. The study showed the parallelism between structure of crust microfungal communities along a regional precipitation gradient in the Negev desert and within a small drainage basin of the Nizzana research station.

Extraction of tidal channel networks from airborne scanning laser altimetry

NASA Astrophysics Data System (ADS)

Mason, David C.; Scott, Tania R.; Wang, Hai-Jing

Tidal channel networks are important features of the inter-tidal zone, and play a key role in tidal propagation and in the evolution of salt marshes and tidal flats. The study of their morphology is currently an active area of research, and a number of theories related to networks have been developed which require validation using dense and extensive observations of network forms and cross-sections. The conventional method of measuring networks is cumbersome and subjective, involving manual digitisation of aerial photographs in conjunction with field measurement of channel depths and widths for selected parts of the network. This paper describes a semi-automatic technique developed to extract networks from high-resolution LiDAR data of the inter-tidal zone. A multi-level knowledge-based approach has been implemented, whereby low-level algorithms first extract channel fragments based mainly on image properties then a high-level processing stage improves the network using domain knowledge. The approach adopted at low level uses multi-scale edge detection to detect channel edges, then associates adjacent anti-parallel edges together to form channels. The higher level processing includes a channel repair mechanism. The algorithm may be extended to extract networks from aerial photographs as well as LiDAR data. Its performance is illustrated using LiDAR data of two study sites, the River Ems, Germany and the Venice Lagoon. For the River Ems data, the error of omission for the automatic channel extractor is 26%, partly because numerous small channels are lost because they fall below the edge threshold, though these are less than 10 cm deep and unlikely to be hydraulically significant. The error of commission is lower, at 11%. For the Venice Lagoon data, the error of omission is 14%, but the error of commission is 42%, due partly to the difficulty of interpreting channels in these natural scenes. As a benchmark, previous work has shown that this type of algorithm specifically designed for extracting tidal networks from LiDAR data is able to achieve substantially improved results compared with those obtained using standard algorithms for drainage network extraction from Digital Terrain Models.

Edge detection and localization with edge pattern analysis and inflection characterization

NASA Astrophysics Data System (ADS)

Jiang, Bo

2012-05-01

In general edges are considered to be abrupt changes or discontinuities in two dimensional image signal intensity distributions. The accuracy of front-end edge detection methods in image processing impacts the eventual success of higher level pattern analysis downstream. To generalize edge detectors designed from a simple ideal step function model to real distortions in natural images, research on one dimensional edge pattern analysis to improve the accuracy of edge detection and localization proposes an edge detection algorithm, which is composed by three basic edge patterns, such as ramp, impulse, and step. After mathematical analysis, general rules for edge representation based upon the classification of edge types into three categories-ramp, impulse, and step (RIS) are developed to reduce detection and localization errors, especially reducing "double edge" effect that is one important drawback to the derivative method. But, when applying one dimensional edge pattern in two dimensional image processing, a new issue is naturally raised that the edge detector should correct marking inflections or junctions of edges. Research on human visual perception of objects and information theory pointed out that a pattern lexicon of "inflection micro-patterns" has larger information than a straight line. Also, research on scene perception gave an idea that contours have larger information are more important factor to determine the success of scene categorization. Therefore, inflections or junctions are extremely useful features, whose accurate description and reconstruction are significant in solving correspondence problems in computer vision. Therefore, aside from adoption of edge pattern analysis, inflection or junction characterization is also utilized to extend traditional derivative edge detection algorithm. Experiments were conducted to test my propositions about edge detection and localization accuracy improvements. The results support the idea that these edge detection method improvements are effective in enhancing the accuracy of edge detection and localization.

Edge guided image reconstruction in linear scan CT by weighted alternating direction TV minimization.

PubMed

Cai, Ailong; Wang, Linyuan; Zhang, Hanming; Yan, Bin; Li, Lei; Xi, Xiaoqi; Li, Jianxin

2014-01-01

Linear scan computed tomography (CT) is a promising imaging configuration with high scanning efficiency while the data set is under-sampled and angularly limited for which high quality image reconstruction is challenging. In this work, an edge guided total variation minimization reconstruction (EGTVM) algorithm is developed in dealing with this problem. The proposed method is modeled on the combination of total variation (TV) regularization and iterative edge detection strategy. In the proposed method, the edge weights of intermediate reconstructions are incorporated into the TV objective function. The optimization is efficiently solved by applying alternating direction method of multipliers. A prudential and conservative edge detection strategy proposed in this paper can obtain the true edges while restricting the errors within an acceptable degree. Based on the comparison on both simulation studies and real CT data set reconstructions, EGTVM provides comparable or even better quality compared to the non-edge guided reconstruction and adaptive steepest descent-projection onto convex sets method. With the utilization of weighted alternating direction TV minimization and edge detection, EGTVM achieves fast and robust convergence and reconstructs high quality image when applied in linear scan CT with under-sampled data set.

An integrated use of topography with RSI in gully mapping, Shandong Peninsula, China.

PubMed

He, Fuhong; Wang, Tao; Gu, Lijuan; Li, Tao; Jiang, Weiguo; Shao, Hongbo

2014-01-01

Taking the Quickbird optical satellite imagery of the small watershed of Beiyanzigou valley of Qixia city, Shandong province, as the study data, we proposed a new method by using a fused image of topography with remote sensing imagery (RSI) to achieve a high precision interpretation of gully edge lines. The technique first transformed remote sensing imagery into HSV color space from RGB color space. Then the slope threshold values of gully edge line and gully thalweg were gained through field survey and the slope data were segmented using thresholding, respectively. Based on the fused image in combination with gully thalweg thresholding vectors, the gully thalweg thresholding vectors were amended. Lastly, the gully edge line might be interpreted based on the amended gully thalweg vectors, fused image, gully edge line thresholding vectors, and slope data. A testing region was selected in the study area to assess the accuracy. Then accuracy assessment of the gully information interpreted by both interpreting remote sensing imagery only and the fused image was performed using the deviation, kappa coefficient, and overall accuracy of error matrix. Compared with interpreting remote sensing imagery only, the overall accuracy and kappa coefficient are increased by 24.080% and 264.364%, respectively. The average deviations of gully head and gully edge line are reduced by 60.448% and 67.406%, respectively. The test results show the thematic and the positional accuracy of gully interpreted by new method are significantly higher. Finally, the error sources for interpretation accuracy by the two methods were analyzed.

An Integrated Use of Topography with RSI in Gully Mapping, Shandong Peninsula, China

PubMed Central

He, Fuhong; Wang, Tao; Gu, Lijuan; Li, Tao; Jiang, Weiguo; Shao, Hongbo

2014-01-01

Taking the Quickbird optical satellite imagery of the small watershed of Beiyanzigou valley of Qixia city, Shandong province, as the study data, we proposed a new method by using a fused image of topography with remote sensing imagery (RSI) to achieve a high precision interpretation of gully edge lines. The technique first transformed remote sensing imagery into HSV color space from RGB color space. Then the slope threshold values of gully edge line and gully thalweg were gained through field survey and the slope data were segmented using thresholding, respectively. Based on the fused image in combination with gully thalweg thresholding vectors, the gully thalweg thresholding vectors were amended. Lastly, the gully edge line might be interpreted based on the amended gully thalweg vectors, fused image, gully edge line thresholding vectors, and slope data. A testing region was selected in the study area to assess the accuracy. Then accuracy assessment of the gully information interpreted by both interpreting remote sensing imagery only and the fused image was performed using the deviation, kappa coefficient, and overall accuracy of error matrix. Compared with interpreting remote sensing imagery only, the overall accuracy and kappa coefficient are increased by 24.080% and 264.364%, respectively. The average deviations of gully head and gully edge line are reduced by 60.448% and 67.406%, respectively. The test results show the thematic and the positional accuracy of gully interpreted by new method are significantly higher. Finally, the error sources for interpretation accuracy by the two methods were analyzed. PMID:25302333

Experimental Investigation of Jet Impingement Heat Transfer Using Thermochromic Liquid Crystals

NASA Technical Reports Server (NTRS)

Dempsey, Brian Paul

1997-01-01

Jet impingement cooling of a hypersonic airfoil leading edge is experimentally investigated using thermochromic liquid crystals (TLCS) to measure surface temperature. The experiment uses computer data acquisition with digital imaging of the TLCs to determine heat transfer coefficients during a transient experiment. The data reduction relies on analysis of a coupled transient conduction - convection heat transfer problem that characterizes the experiment. The recovery temperature of the jet is accounted for by running two experiments with different heating rates, thereby generating a second equation that is used to solve for the recovery temperature. The resulting solution requires a complicated numerical iteration that is handled by a computer. Because the computational data reduction method is complex, special attention is paid to error assessment. The error analysis considers random and systematic errors generated by the instrumentation along with errors generated by the approximate nature of the numerical methods. Results of the error analysis show that the experimentally determined heat transfer coefficients are accurate to within 15%. The error analysis also shows that the recovery temperature data may be in error by more than 50%. The results show that the recovery temperature data is only reliable when the recovery temperature of the jet is greater than 5 C, i.e. the jet velocity is in excess of 100 m/s. Parameters that were investigated include nozzle width, distance from the nozzle exit to the airfoil surface, and jet velocity. Heat transfer data is presented in graphical and tabular forms. An engineering analysis of hypersonic airfoil leading edge cooling is performed using the results from these experiments. Several suggestions for the improvement of the experimental technique are discussed.

RGB-to-RGBG conversion algorithm with adaptive weighting factors based on edge detection and minimal square error.

PubMed

Huang, Chengqiang; Yang, Youchang; Wu, Bo; Yu, Weize

2018-06-01

The sub-pixel arrangement of the RGBG panel and the image with RGB format are different and the algorithm that converts RGB to RGBG is urgently needed to display an image with RGB arrangement on the RGBG panel. However, the information loss is still large although color fringing artifacts are weakened in the published papers that study this conversion. In this paper, an RGB-to-RGBG conversion algorithm with adaptive weighting factors based on edge detection and minimal square error (EDMSE) is proposed. The main points of innovation include the following: (1) the edge detection is first proposed to distinguish image details with serious color fringing artifacts and image details which are prone to be lost in the process of RGB-RGBG conversion; (2) for image details with serious color fringing artifacts, the weighting factor 0.5 is applied to weaken the color fringing artifacts; and (3) for image details that are prone to be lost in the process of RGB-RGBG conversion, a special mechanism to minimize square error is proposed. The experiment shows that the color fringing artifacts are slightly improved by EDMSE, and the values of MSE of the image processed are 19.6% and 7% smaller than those of the image processed by the direct assignment and weighting factor algorithm, respectively. The proposed algorithm is implemented on a field programmable gate array to enable the image display on the RGBG panel.

Microcontrollers for data logging in Environmental Physics

NASA Astrophysics Data System (ADS)

Harrison, R. Giles; Westbrook, Christopher. D.

2016-04-01

Methods for obtaining reliable environmental measurements are central in developing a quantitative understanding of the natural world [1]. In the environmental sciences, data is usually obtained through planned experimental work, by collaborators in large field experiments or merely from others downloaded through the internet. Careful appreciation of the provenance and reliability of measurements has traditionally been a central aspect of physics education, and a similar physics-centred approach to measurements has been embedded in the new Environmental Physics BSc programme at the University of Reading [2]. Through the use of practical classes, students are educated in using small programmable microcontroller devices to obtain environmental data. The classes are based around exploring the open source Arduino, to which a range of analogue and digital sensors are connected and evaluated. A simplified prototyping system has been developed to help emphasise the measurement aspects over the electronics considerations. The practical classes work towards deployment of a miniature data logger based on the Arduino's microcontroller but optimised for low power, from which the environmental measurements are compared with co-located standard data obtained at the Reading University Atmospheric Observatory. [1] R.G. Harrison, Meteorological Measurements and Instrumentation, Wiley, 2014. (http://eu.wiley.com/WileyCDA/WileyTitle/productCd-1118745809.html) [2] Environmental Physics BSc (https://www.reading.ac.uk/ready-to-study/study/subject-area/environment-ug/bsc-environmental-physics.aspx)

Bovine dairy complex lipids improve in vitro measures of small intestinal epithelial barrier integrity.

PubMed

Anderson, Rachel C; MacGibbon, Alastair K H; Haggarty, Neill; Armstrong, Kelly M; Roy, Nicole C

2018-01-01

Appropriate intestinal barrier maturation is essential for absorbing nutrients and preventing pathogens and toxins from entering the body. Compared to breast-fed infants, formula-fed infants are more susceptible to barrier dysfunction-associated illnesses. In infant formula dairy lipids are usually replaced with plant lipids. We hypothesised that dairy complex lipids improve in vitro intestinal epithelial barrier integrity. We tested milkfat high in conjugated linoleic acid, beta serum (SureStart™Lipid100), beta serum concentrate (BSC) and a ganglioside-rich fraction (G600). Using Caco-2 cells as a model of the human small intestinal epithelium, we analysed the effects of the ingredients on trans-epithelial electrical resistance (TEER), mannitol flux, and tight junction protein co-localisation. BSC induced a dose-dependent improvement in TEER across unchallenged cell layers, maintained the co-localisation of tight junction proteins in TNFα-challenged cells with increased permeability, and mitigated the TEER-reducing effects of lipopolysaccharide (LPS). G600 also increased TEER across healthy and LPS-challenged cells, but it did not alter the co-location of tight junction proteins in TNFα-challenged cells. SureStart™Lipid100 had similar TEER-increasing effects to BSC when added at twice the concentration (similar lipid concentration). Ultimately, this research aims to contribute to the development of infant formulas supplemented with dairy complex lipids that support infant intestinal barrier maturation.

Backstepping fuzzy-neural-network control design for hybrid maglev transportation system.

PubMed

Wai, Rong-Jong; Yao, Jing-Xiang; Lee, Jeng-Dao

2015-02-01

This paper focuses on the design of a backstepping fuzzy-neural-network control (BFNNC) for the online levitated balancing and propulsive positioning of a hybrid magnetic levitation (maglev) transportation system. The dynamic model of the hybrid maglev transportation system including levitated hybrid electromagnets to reduce the suspension power loss and the friction force during linear movement and a propulsive linear induction motor based on the concepts of mechanical geometry and motion dynamics is first constructed. The ultimate goal is to design an online fuzzy neural network (FNN) control methodology to cope with the problem of the complicated control transformation and the chattering control effort in backstepping control (BSC) design, and to directly ensure the stability of the controlled system without the requirement of strict constraints, detailed system information, and auxiliary compensated controllers despite the existence of uncertainties. In the proposed BFNNC scheme, an FNN control is utilized to be the major control role by imitating the BSC strategy, and adaptation laws for network parameters are derived in the sense of projection algorithm and Lyapunov stability theorem to ensure the network convergence as well as stable control performance. The effectiveness of the proposed control strategy for the hybrid maglev transportation system is verified by experimental results, and the superiority of the BFNNC scheme is indicated in comparison with the BSC strategy and the backstepping particle-swarm-optimization control system in previous research.

Bovine dairy complex lipids improve in vitro measures of small intestinal epithelial barrier integrity

PubMed Central

MacGibbon, Alastair K. H.; Haggarty, Neill; Armstrong, Kelly M.; Roy, Nicole C.

2018-01-01

Appropriate intestinal barrier maturation is essential for absorbing nutrients and preventing pathogens and toxins from entering the body. Compared to breast-fed infants, formula-fed infants are more susceptible to barrier dysfunction-associated illnesses. In infant formula dairy lipids are usually replaced with plant lipids. We hypothesised that dairy complex lipids improve in vitro intestinal epithelial barrier integrity. We tested milkfat high in conjugated linoleic acid, beta serum (SureStart™Lipid100), beta serum concentrate (BSC) and a ganglioside-rich fraction (G600). Using Caco-2 cells as a model of the human small intestinal epithelium, we analysed the effects of the ingredients on trans-epithelial electrical resistance (TEER), mannitol flux, and tight junction protein co-localisation. BSC induced a dose-dependent improvement in TEER across unchallenged cell layers, maintained the co-localisation of tight junction proteins in TNFα-challenged cells with increased permeability, and mitigated the TEER-reducing effects of lipopolysaccharide (LPS). G600 also increased TEER across healthy and LPS-challenged cells, but it did not alter the co-location of tight junction proteins in TNFα-challenged cells. SureStart™Lipid100 had similar TEER-increasing effects to BSC when added at twice the concentration (similar lipid concentration). Ultimately, this research aims to contribute to the development of infant formulas supplemented with dairy complex lipids that support infant intestinal barrier maturation. PMID:29304106

Competing values in healthcare: balancing the (un)balanced scorecard.

PubMed

Wicks, Angela M; St Clair, Lynda

2007-01-01

Facing a complex environment driven by two decades of dramatic change, healthcare organizations are adopting new strategic frameworks such as the Balanced Scorecard (BSC) to evaluate performance (Kaplan and Norton 1992). The BSC was not originally developed as a performance management tool, however. Rather, it was designed as a tool to communicate strategy and, as such, provides little guidance when actual outcomes fall short of desired outcomes. In addition, although the BSC is an improvement over exclusively financial measures, it has three conceptual limitations that are especially problematic for evaluating healthcare organizations: (1) it underemphasizes the employee perspective, (2) it is founded on a control-based management philosophy, and (3) it emphasizes making trade-offs. To address these limitations, we propose using the Competing Values Framework (CVF), a theoretically grounded, comprehensive approach to understanding and improving organizational and managerial performance by focusing on four action imperatives: competing, controlling, collaborating, and creating. The CVF pays particular attention to the employee perspective, is consistent with a commitment-based management philosophy, and emphasizes transcending apparent paradoxes to identify win-win solutions. Rather than focusing on customer satisfaction or employee satisfaction, the CVF looks for ways to satisfy customers and employees while still addressing financial constraints and growth opportunities. The CVF also can be used to assess both the culture of the organization and the competencies of individual managers, thereby providing a clear link between strategy and implementation.

Outcome of older patients with acute myeloid leukemia in first relapse.

PubMed

Sarkozy, Clémentine; Gardin, Claude; Gachard, Nathalie; Merabet, Fathia; Turlure, Pascal; Malfuson, Jean-Valère; Pautas, Cécile; Micol, Jean-Baptiste; Thomas, Xavier; Quesnel, Bruno; Celli-Lebras, Karine; Preudhomme, Claude; Terré, Christine; Fenaux, Pierre; Chevret, Sylvie; Castaigne, Sylvie; Dombret, Hervé

2013-09-01

To provide data for future drug evaluation, we analyzed the outcome of 393 patients aged 50 years or older (median, 64 years) with AML in first relapse after treatment in recent ALFA trials. Salvage options were retrospectively classified as follows: best supportive care (BSC), low-dose cytarabine (LDAC), gemtuzumab ozogamicin (GO), intensive chemotherapy (ICT), or ICT combined with GO. Second complete remission (CR2) rate was 31% and median post-relapse survival was 6.8 months (0, 17, 42.5, 53, and 80% and 3.2, 5.6, 8.9, 9, and 19.8 months in BSC, LDAC, GO, ICT, and ICT + GO subsets, respectively). Age, performance status, WBC, CR1 duration, and favorable AML karyotype, but not other cytogenetic or molecular features, influenced post-relapse outcome. Multivariate adjustment and propensity score matching showed that intensive salvage (ICT/ICT+GO/GO versus LDAC/BSC) was associated with longer post-relapse survival, at least in patients with CR1 duration ≥12 months (P = 0.001 and 0.0005, respectively). Of interest, GO appeared to be as effective as standard ICT, and ICT + GO combination more effective than standard ICT. In conclusion, older patients with CR1 duration ≥12 months appeared to benefit from intensive salvage and results observed with GO-containing salvage suggest that GO combination studies should be actively pursued in this setting. Copyright © 2013 Wiley Periodicals, Inc.

Persistence, how do they do it? A case study of Access to Higher Education learners on a U.K. Diploma/BSc nursing programme.

PubMed

Hinsliff-Smith, Kathryn; Gates, Peter; Leducq, Marion

2012-01-01

In 2006, the United Kingdom (U.K.) Department of Health (DoH) produced guidelines, requiring institutions to address the attrition rates for student nurses and midwives. This issue is not only a concern in the U.K. but has gained prominence in other Schools of Nursing including the U.S.A., Australia, and developing countries. Many Schools of Nursing have witnessed a change in their student population with a growing prominence of mature entrants (those over 21). Studies that focus on learner persistence, in particular mature students are relatively rare and very scarce on entrants with an Access to Higher Education (HE) qualification. This study, using focus group interviews, involved Access to HE learners who successfully progressed to a Diploma of Higher Education (DipHE)/Bachelor of Science (BSc) in Nursing at one U.K. University. The study findings indicated that Access to HE learners are able to develop a range of coping strategies in relation to academic demands and caring responsibilities, which are drawn upon in their DipHE/BSc programme. The findings have relevance for all Schools of Nursing as we face new and difficult challenges not least the global shortage of qualified nurses and the pressures placed on educators to retain student nurses. Copyright © 2011 Elsevier Ltd. All rights reserved.

Smoke without fire: a reply to Hardy, Segatore and Edge.

PubMed

Stones, M J; Turner, K

1993-12-01

Literacy is defined in the Oxford English Dictionary as the ability to read and write, and illiteracy as an inability to read. Hardy, Segatore and Edge (1993) suggest a serious problem of illiteracy among student nurses that endangers patient safety. Their evidence is entirely anecdotal, some of which is misclassified as literacy errors. They provide no substantive or statistical evidence to support their claims. Educators making serious and provocative charges on such flimsy grounds ought either to recant or obtain evidence that is more convincing.

EPE fundamentals and impact of EUV: Will traditional design-rule calculations work in the era of EUV?

NASA Astrophysics Data System (ADS)

Gabor, Allen H.; Brendler, Andrew C.; Brunner, Timothy A.; Chen, Xuemei; Culp, James A.; Levinson, Harry J.

2018-03-01

The relationship between edge placement error, semiconductor design-rule determination and predicted yield in the era of EUV lithography is examined. This paper starts with the basics of edge placement error and then builds up to design-rule calculations. We show that edge placement error (EPE) definitions can be used as the building blocks for design-rule equations but that in the last several years the term "EPE" has been used in the literature to refer to many patterning errors that are not EPE. We then explore the concept of "Good Fields"1 and use it predict the n-sigma value needed for design-rule determination. Specifically, fundamental yield calculations based on the failure opportunities per chip are used to determine at what n-sigma "value" design-rules need to be tested to ensure high yield. The "value" can be a space between two features, an intersect area between two features, a minimum area of a feature, etc. It is shown that across chip variation of design-rule important values needs to be tested at sigma values between seven and eight which is much higher than the four-sigma values traditionally used for design-rule determination. After recommending new statistics be used for design-rule calculations the paper examines the impact of EUV lithography on sources of variation important for design-rule calculations. We show that stochastics can be treated as an effective dose variation that is fully sampled across every chip. Combining the increased within chip variation from EUV with the understanding that across chip variation of design-rule important values needs to not cause a yield loss at significantly higher sigma values than have traditionally been looked at, the conclusion is reached that across-wafer, wafer-to-wafer and lot-to-lot variation will have to overscale for any technology introducing EUV lithography where stochastic noise is a significant fraction of the effective dose variation. We will emphasize stochastic effects on edge placement error distributions and appropriate design-rule setting. While CD distributions with long tails coming from stochastic effects do bring increased risk of failure (especially on chips that may have over a billion failure opportunities per layer) there are other sources of variation that have sharp cutoffs, i.e. have no tails. We will review these sources and show how distributions with different skew and kurtosis values combine.

Diphtheria toxin can simultaneously bind to its receptor and adenylyl-(3',5')-uridine 3'-monophosphate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barbieri, J.T.; Collins, C.M.; Collier, R.J.

1986-10-21

Diphtheria toxin (DT) that was bound to receptors on BS-C-1 cells was able to bind approximately 1 molar equiv of adenylyl-(3',5')-uridine 3'-monophosphate (ApUp). In contrast, receptor-bound CRM197, a mutant form of toxin with greatly diminished affinity for dinucleotides, did not bind ApUp. Affinity of the dinucleotide for receptor-bound toxin differed from that for free toxin by less than an order of magnitude. These results indicate that the receptor site and the ApUp site on the toxin do not significantly overlap. BS-C-1 cells were incubated with or without /sup 125/I-DT or CRM 197. They were then incubated with (/sup 32/P)ApUp, andmore » assayed.« less

Structural design of morphing trailing edge actuated by SMA

NASA Astrophysics Data System (ADS)

Wang, Qi; Xu, Zhiwei; Zhu, Qian

2013-09-01

In this paper, the morphing trailing edge is designed to achieve the up and down deflection under the aerodynamic load. After a detailed and accurate computational analysis to determine the SMA specifications and layout programs, a solid model is created in CATIA and the structures of the morphing wing trailing edge are produced by CNC machining. A set of DSP measurement and control system is designed to accomplish the controlling experiment of the morphing wing trailing edge. At last, via the force analysis, the trailing edge is fabricated with four sections of aluminum alloy, and the arrangement scheme of SMA wires is determined. Experiment of precise control integral has been performed to survey the control effect. The experiment consists of deflection angle tests of the third joint and the integral structure. Primarily, the ultimate deflection angle is tested in these two experiments. Therefore, the controlling experiment of different angles could be performed within this range. The results show that the deflection error is less than 4%and response time is less than 6.7 s, the precise controlling of the morphing trailing edge is preliminary realized.

K- and L-edge X-ray absorption spectrum calculations of closed-shell carbon, silicon, germanium, and sulfur compounds using damped four-component density functional response theory.

PubMed

Fransson, Thomas; Burdakova, Daria; Norman, Patrick

2016-05-21

X-ray absorption spectra of carbon, silicon, germanium, and sulfur compounds have been investigated by means of damped four-component density functional response theory. It is demonstrated that a reliable description of relativistic effects is obtained at both K- and L-edges. Notably, an excellent agreement with experimental results is obtained for L2,3-spectra-with spin-orbit effects well accounted for-also in cases when the experimental intensity ratio deviates from the statistical one of 2 : 1. The theoretical results are consistent with calculations using standard response theory as well as recently reported real-time propagation methods in time-dependent density functional theory, and the virtues of different approaches are discussed. As compared to silane and silicon tetrachloride, an anomalous error in the absolute energy is reported for the L2,3-spectrum of silicon tetrafluoride, amounting to an additional spectral shift of ∼1 eV. This anomaly is also observed for other exchange-correlation functionals, but it is seen neither at other silicon edges nor at the carbon K-edge of fluorine derivatives of ethene. Considering the series of molecules SiH4-XFX with X = 1, 2, 3, 4, a gradual divergence from interpolated experimental ionization potentials is observed at the level of Kohn-Sham density functional theory (DFT), and to a smaller extent with the use of Hartree-Fock. This anomalous error is thus attributed partly to difficulties in correctly emulating the electronic structure effects imposed by the very electronegative fluorines, and partly due to inconsistencies in the spurious electron self-repulsion in DFT. Substitution with one, or possibly two, fluorine atoms is estimated to yield small enough errors to allow for reliable interpretations and predictions of L2,3-spectra of more complex and extended silicon-based systems.

Measurement of dinitrogen fixation by Biological soil crust (BSC) from the Sahelian zone: an isotopic method.

NASA Astrophysics Data System (ADS)

Ehrhardt, F.; Alavoine, G.; Bertrand, I.

2012-04-01

Amongst the described ecological roles of Biological Soil Crust, N fixation is of importance for soil fertility, especially in arid and semi-arid ecosystems with low inputs. In BSC, the quantification of N fixation fluxes using an indirect method is widespread, usually with the Acetylene Reduction Assay (ARA) which consists in measuring the nitrogenase activity through the process of acetylene reduction into ethylene. A converting factor, still discussed in the literature and greatly depending of the constitutive organisms of the BSC, is the tool used to convert the amount of reduced ethylene into quantitative fixed Nitrogen. The aim of this poster is to describe an isotopic direct method to quantify the atmospheric dinitrogen fixation fluxes in BSC, while minimizing the variability due to manipulations. Nine different BSC from the Sahelian zone were selected and placed in an incubation room at 28° C in dark and light conditions during three days, while moisture equivalent to pF=2 was regularly adjusted using the gravimetric method with needles and deionized water, in order to activate and reach a dynamic stability of their metabolisms. Subsequently, each crust was placed into a gas-tight glass vial for incubation with a reconstituted 15N2 enriched atmosphere (31.61 % atom 15N, while the proportion of each main gas present in the air was conserved, i.e. 78% N2, 21% O2 and 0.04% CO2). Principal difficulties are to guarantee the airtighness of the system, to avoid crust desiccation and to keep the crust metabolically active under stable conditions for six hours. Several tests were performed to determine the optimum time for 15N2 incubation. Three replicated control samples per crust were also stabilized for three days and then dried at 105° C, without any incubation with 15N2 enriched atmosphere. Total N and 15N were then measured in the grounded (80μm) and dried (105° C) crust, using a Flash EA elemental analyzer (Eurovector, Milan, Italy) coupled to a DeltaPlus Advantage mass spectrometer (Finnigan Thermo Fisher Scientific, Bremen, Germany). N2fixation fluxes were calculated from the difference between the amount of 15N in incubated and in control samples. Mean values ranged from 1.32.10-3 ± 1.02.10-4 to 8.47.10-2 ± 2.63.10-3 mgN.m-2.h-1. Concerning the variability, differences observed between crusts and between replicates are probably related to the characteristic of each crust as well as to field sampling which integrates the important heterogeneity and sensitivity of the material.

QUADRATIC SERENDIPITY FINITE ELEMENTS ON POLYGONS USING GENERALIZED BARYCENTRIC COORDINATES.

PubMed

Rand, Alexander; Gillette, Andrew; Bajaj, Chandrajit

2014-01-01

We introduce a finite element construction for use on the class of convex, planar polygons and show it obtains a quadratic error convergence estimate. On a convex n -gon, our construction produces 2 n basis functions, associated in a Lagrange-like fashion to each vertex and each edge midpoint, by transforming and combining a set of n ( n + 1)/2 basis functions known to obtain quadratic convergence. The technique broadens the scope of the so-called 'serendipity' elements, previously studied only for quadrilateral and regular hexahedral meshes, by employing the theory of generalized barycentric coordinates. Uniform a priori error estimates are established over the class of convex quadrilaterals with bounded aspect ratio as well as over the class of convex planar polygons satisfying additional shape regularity conditions to exclude large interior angles and short edges. Numerical evidence is provided on a trapezoidal quadrilateral mesh, previously not amenable to serendipity constructions, and applications to adaptive meshing are discussed.

Optimization of Pockels electric field in transverse modulated optical voltage sensor

NASA Astrophysics Data System (ADS)

Huang, Yifan; Xu, Qifeng; Chen, Kun-Long; Zhou, Jie

2018-05-01

This paper investigates the possibilities of optimizing the Pockels electric field in a transverse modulated optical voltage sensor with a spherical electrode structure. The simulations show that due to the edge effect and the electric field concentrations and distortions, the electric field distributions in the crystal are non-uniform. In this case, a tiny variation in the light path leads to an integral error of more than 0.5%. Moreover, a 2D model cannot effectively represent the edge effect, so a 3D model is employed to optimize the electric field distributions. Furthermore, a new method to attach a quartz crystal to the electro-optic crystal along the electric field direction is proposed to improve the non-uniformity of the electric field. The integral error is reduced therefore from 0.5% to 0.015% and less. The proposed method is simple, practical and effective, and it has been validated by numerical simulations and experimental tests.

High Precision Edge Detection Algorithm for Mechanical Parts

NASA Astrophysics Data System (ADS)

Duan, Zhenyun; Wang, Ning; Fu, Jingshun; Zhao, Wenhui; Duan, Boqiang; Zhao, Jungui

2018-04-01

High precision and high efficiency measurement is becoming an imperative requirement for a lot of mechanical parts. So in this study, a subpixel-level edge detection algorithm based on the Gaussian integral model is proposed. For this purpose, the step edge normal section line Gaussian integral model of the backlight image is constructed, combined with the point spread function and the single step model. Then gray value of discrete points on the normal section line of pixel edge is calculated by surface interpolation, and the coordinate as well as gray information affected by noise is fitted in accordance with the Gaussian integral model. Therefore, a precise location of a subpixel edge was determined by searching the mean point. Finally, a gear tooth was measured by M&M3525 gear measurement center to verify the proposed algorithm. The theoretical analysis and experimental results show that the local edge fluctuation is reduced effectively by the proposed method in comparison with the existing subpixel edge detection algorithms. The subpixel edge location accuracy and computation speed are improved. And the maximum error of gear tooth profile total deviation is 1.9 μm compared with measurement result with gear measurement center. It indicates that the method has high reliability to meet the requirement of high precision measurement.

Assessment of the Applicability of Hertzian Contact Theory to Edge-Loaded Prosthetic Hip Bearings

PubMed Central

Sanders, Anthony P.; Brannon, Rebecca M.

2011-01-01

The components of prosthetic hip bearings may experience in-vivo subluxation and edge loading on the acetabular socket as a result of joint laxity, causing abnormally high, damaging contact stresses. In this research, edge-loaded contact of prosthetic hips is examined analytically and experimentally in the most commonly used categories of material pairs. In edge-loaded ceramic-on-ceramic hips, Hertzian contact theory yields accurate (conservatively, <10% error) predictions of the contact dimensions. Moreover, Hertzian theory successfully captures slope and curvature trends in the dependence of contact patch geometry on the applied load. In an edge-loaded ceramic-on-metal pair, a similar degree of accuracy is observed in the contact patch length; however, the contact width is less accurately predicted due to the onset of subsurface plasticity, which is predicted for loads >400 N. Hertzian contact theory is shown to be ill-suited to edge-loaded ceramic-on-polyethylene pairs due to polyethylene’s nonlinear material behavior. This work elucidates the methods and the accuracy of applying classical contact theory to edge-loaded hip bearings. The results help to define the applicability of Hertzian theory to the design of new components and materials to better resist severe edge loading contact stresses. PMID:21962465

Co-optimization of lithographic and patterning processes for improved EPE performance

NASA Astrophysics Data System (ADS)

Maslow, Mark J.; Timoshkov, Vadim; Kiers, Ton; Jee, Tae Kwon; de Loijer, Peter; Morikita, Shinya; Demand, Marc; Metz, Andrew W.; Okada, Soichiro; Kumar, Kaushik A.; Biesemans, Serge; Yaegashi, Hidetami; Di Lorenzo, Paolo; Bekaert, Joost P.; Mao, Ming; Beral, Christophe; Larivière, Stephane

2017-03-01

Complimentary lithography is already being used for advanced logic patterns. The tight pitches for 1D Metal layers are expected to be created using spacer based multiple patterning ArF-i exposures and the more complex cut/block patterns are made using EUV exposures. At the same time, control requirements of CDU, pattern shift and pitch-walk are approaching sub-nanometer levels to meet edge placement error (EPE) requirements. Local variability, such as Line Edge Roughness (LER), Local CDU, and Local Placement Error (LPE), are dominant factors in the total Edge Placement error budget. In the lithography process, improving the imaging contrast when printing the core pattern has been shown to improve the local variability. In the etch process, it has been shown that the fusion of atomic level etching and deposition can also improve these local variations. Co-optimization of lithography and etch processing is expected to further improve the performance over individual optimizations alone. To meet the scaling requirements and keep process complexity to a minimum, EUV is increasingly seen as the platform for delivering the exposures for both the grating and the cut/block patterns beyond N7. In this work, we evaluated the overlay and pattern fidelity of an EUV block printed in a negative tone resist on an ArF-i SAQP grating. High-order Overlay modeling and corrections during the exposure can reduce overlay error after development, a significant component of the total EPE. During etch, additional degrees of freedom are available to improve the pattern placement error in single layer processes. Process control of advanced pitch nanoscale-multi-patterning techniques as described above is exceedingly complicated in a high volume manufacturing environment. Incorporating potential patterning optimizations into both design and HVM controls for the lithography process is expected to bring a combined benefit over individual optimizations. In this work we will show the EPE performance improvement for a 32nm pitch SAQP + block patterned Metal 2 layer by cooptimizing the lithography and etch processes. Recommendations for further improvements and alternative processes will be given.

Computational intelligence for the Balanced Scorecard: studying performance trends of hemodialysis clinics.

PubMed

Cattinelli, Isabella; Bolzoni, Elena; Chermisi, Milena; Bellocchio, Francesco; Barbieri, Carlo; Mari, Flavio; Amato, Claudia; Menzer, Marcus; Stopper, Andrea; Gatti, Emanuele

2013-07-01

The Balanced Scorecard (BSC) is a general, widely employed instrument for enterprise performance monitoring based on the periodic assessment of strategic Key Performance Indicators that are scored against preset targets. The BSC is currently employed as an effective management support tool within Fresenius Medical Care (FME) and is routinely analyzed via standard statistical methods. More recently, the application of computational intelligence techniques (namely, self-organizing maps) to BSC data has been proposed as a way to enhance the quantity and quality of information that can be extracted from it. In this work, additional methods are presented to analyze the evolution of clinic performance over time. Performance evolution is studied at the single-clinic level by computing two complementary indexes that measure the proportion of time spent within performance clusters and improving/worsening trends. Self-organizing maps are used in conjunction with these indexes to identify the specific drivers of the observed performance. The performance evolution for groups of clinics is modeled under a probabilistic framework by resorting to Markov chain properties. These allow a study of the probability of transitioning between performance clusters as time progresses for the identification of the performance level that is expected to become dominant over time. We show the potential of the proposed methods through illustrative results derived from the analysis of BSC data of 109 FME clinics in three countries. We were able to identify the performance drivers for specific groups of clinics and to distinguish between countries whose performances are likely to improve from those where a decline in performance might be expected. According to the stationary distribution of the Markov chain, the expected trend is best in Turkey (where the highest performance cluster has the highest probability, P=0.46), followed by Portugal (where the second best performance cluster dominates, with P=0.50), and finally Italy (where the second best performance cluster has P=0.34). These results highlight the ability of the proposed methods to extract insights about performance trends that cannot be easily extrapolated using standard analyses and that are valuable in directing management strategies within a continuous quality improvement policy. Copyright © 2013 Elsevier B.V. All rights reserved.

ENGINEERED BARRIER SYSTEM: PHYSICAL AND CHEMICAL ENVIRONMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

R. Jarek

2005-08-29

The purpose of this model report is to describe the evolution of the physical and chemical environmental conditions within the waste emplacement drifts of the repository, including the drip shield and waste package surfaces. The resulting seepage evaporation and gas abstraction models are used in the total system performance assessment for the license application (TSPA-LA) to assess the performance of the engineered barrier system and the waste form. This report develops and documents a set of abstraction-level models that describe the engineered barrier system physical and chemical environment. Where possible, these models use information directly from other reports as input,more » which promotes integration among process models used for TSPA-LA. Specific tasks and activities of modeling the physical and chemical environment are included in ''Technical Work Plan for: Near-Field Environment and Transport In-Drift Geochemistry Model Report Integration'' (BSC 2005 [DIRS 173782], Section 1.2.2). As described in the technical work plan, the development of this report is coordinated with the development of other engineered barrier system reports. To be consistent with other project documents that address features, events, and processes (FEPs), Table 6.14.1 of the current report includes updates to FEP numbers and FEP subjects for two FEPs identified in the technical work plan (TWP) governing this report (BSC 2005 [DIRS 173782]). FEP 2.1.09.06.0A (Reduction-oxidation potential in EBS), as listed in Table 2 of the TWP (BSC 2005 [DIRS 173782]), has been updated in the current report to FEP 2.1.09.06.0B (Reduction-oxidation potential in Drifts; see Table 6.14-1). FEP 2.1.09.07.0A (Reaction kinetics in EBS), as listed in Table 2 of the TWP (BSC 2005 [DIRS 173782]), has been updated in the current report to FEP 2.1.09.07.0B (Reaction kinetics in Drifts; see Table 6.14-1). These deviations from the TWP are justified because they improve integration with FEPs documents. The updates have no impact on the model developed in this report.« less

Influence of the Temperature and the Genotype of the HSP90AA1 Gene over Sperm Chromatin Stability in Manchega Rams

PubMed Central

Ramón, Manuel; Salces-Ortiz, Judit; González, Carmen; Pérez-Guzmán, M. Dolores; Garde, J. Julián; García-Álvarez, Olga; Maroto-Morales, Alejandro; Calvo, Jorge H.; Serrano, M. Magdalena

2014-01-01

The present study addresses the effect of heat stress on males' reproduction ability. For that, we have evaluated the sperm DNA fragmentation (DFI) by SCSA of ejaculates incubated at 37°C during 0, 24 and 48 hours after its collection, as a way to mimic the temperature circumstances to which spermatozoa will be subject to in the ewe uterus. The effects of temperature and temperature-humidity index (THI) from day 60 prior collection to the date of semen collection on DFI were examined. To better understand the causes determining the sensitivity of spermatozoa to heat, this study was conducted in 60 males with alternative genotypes for the SNP G/C−660 of the HSP90AA1 promoter, which encode for the Hsp90α protein. The Hsp90α protein predominates in the brain and testis, and its role in spermatogenesis has been described in several species. Ridge regression analyses showed that days 29 to 35 and 7 to 14 before sperm collection (bsc) were the most critical regarding the effect of heat stress over DFI values. Mixed model analyses revealed that DFI increases over a threshold of 30°C for maximum temperature and 22 for THI at days 29 to 35 and 7 to 14 bsc only in animals carrying the GG−660 genotype. The period 29–35 bsc coincide with the meiosis I process for which the effect of the Hsp90α has been described in mice. The period 7–14 bsc may correspond with later stages of the meiosis II and early stages of epididymal maturation in which the replacement of histones by protamines occurs. Because of GG−660 genotype has been associated to lower levels of HSP90AA1 expression, suboptimal amounts of HSP90AA1 mRNA in GG−660 animals under heat stress conditions make spermatozoa DNA more susceptible to be fragmented. Thus, selecting against the GG−660 genotype could decrease the DNA fragmentation and spermatozoa thermal susceptibility in the heat season, and its putative subsequent fertility gains. PMID:24465903

Cost-effectiveness of continuation maintenance pemetrexed after cisplatin and pemetrexed chemotherapy for advanced nonsquamous non-small-cell lung cancer: estimates from the perspective of the Chinese health care system.

PubMed

Zeng, Xiaohui; Peng, Liubao; Li, Jianhe; Chen, Gannong; Tan, Chongqing; Wang, Siying; Wan, Xiaomin; Ouyang, Lihui; Zhao, Ziying

2013-01-01

Continuation maintenance treatment with pemetrexed is approved by current clinical guidelines as a category 2A recommendation after induction therapy with cisplatin and pemetrexed chemotherapy (CP strategy) for patients with advanced nonsquamous non-small-cell lung cancer (NSCLC). However, the cost-effectiveness of the treatment remains unclear. We completed a trial-based assessment, from the perspective of the Chinese health care system, of the cost-effectiveness of maintenance pemetrexed treatment after a CP strategy for patients with advanced nonsquamous NSCLC. A Markov model was developed to estimate costs and benefits. It was based on a clinical trial that compared continuation maintenance pemetrexed therapy plus best supportive care (BSC) versus placebo plus BSC after a CP strategy for advanced nonsquamous NSCLC. Sensitivity analyses were conducted to assess the stability of the model. The model base case analysis suggested that continuation maintenance pemetrexed therapy after a CP strategy would increase benefits in a 1-, 2-, 5-, or 10-year time horizon, with incremental costs of $183,589.06, $126,353.16, $124,766.68, and $124,793.12 per quality-adjusted life-year gained, respectively. The most sensitive influential variable in the cost-effectiveness analysis was the utility of the progression-free survival state, followed by proportion of patients with postdiscontinuation therapy in both arms, proportion of BSC costs for PFS versus progressed survival state, and cost of pemetrexed. Probabilistic sensitivity analysis indicated that the cost-effective probability of adding continuation maintenance pemetrexed therapy to BSC was zero. One-way and probabilistic sensitivity analyses revealed that the Markov model was robust. Continuation maintenance of pemetrexed after a CP strategy for patients with advanced nonsquamous NSCLC is not cost-effective based on a recent clinical trial. Decreasing the price or adjusting the dosage of pemetrexed may be a better option for meeting the treatment demands of Chinese patients. Copyright © 2013 Elsevier HS Journals, Inc. All rights reserved.

Comparison of self-reported professional competency across pharmacy education programs: a survey of Thai pharmacy graduates enrolled in the public service program

PubMed Central

Sumpradit, Nithima; Suttajit, Siritree; Hunnangkul, Saowalak; Wisaijohn, Thunthita; Putthasri, Weerasak

2014-01-01

Introduction Thai pharmacy education consists of two undergraduate programs, a 5-year Bachelor of Science in Pharmacy (BScPsci and BScPcare) degree and a 6-year Doctor of Pharmacy (Pharm D). Pharmacy students who wish to serve in the public sector need to enroll in the public service program. This study aims to compare the perception of professional competency among new pharmacy graduates from the three different pharmacy programs available in 2013 who enrolled in the public service program. Methods A cross-sectional survey was conducted among new pharmacy graduates in 2013 using a self-administered, structured, close-ended questionnaire. The questionnaire consisted of respondents’ characteristics and perception of professional competencies. The competency questions consisted of 13 items with a 5-point scale. Data collection was conducted during Thailand’s annual health professional meeting on April 2, 2013 for workplace selection of pharmacy graduates. Results A total of 266 new pharmacy graduates responded to the questionnaire (response rate 49.6%). There were no significant differences in sex and admission modes across the three pharmacy programs. Pharm D graduates reported highest competency in acute care services, medication reconciliation services, and primary care services among the other two programs. BScPsci graduates reported more competence in consumer health protection and herbal and alternative medicines than BScPcare graduates. There were significant differences in three competency domains: patient care, consumer protection and community health services, and drug review and information, but no significant differences in the health administration and communication domain among three pharmacy programs. Conclusion Despite a complete change into a 6-year Pharm D program in 2014, pharmacy education in Thailand should continue evolving to be responsive to the needs of the health system. An annual survey of new pharmacy graduates should be continued, to monitor changes of professional competency across different program tracks and other factors which may influence their contribution to the health service system. Likewise, a longitudinal monitoring of their competencies in the graduate cohort should be conducted. PMID:25337000

Comparison of self-reported professional competency across pharmacy education programs: a survey of Thai pharmacy graduates enrolled in the public service program.

PubMed

Sumpradit, Nithima; Suttajit, Siritree; Hunnangkul, Saowalak; Wisaijohn, Thunthita; Putthasri, Weerasak

2014-01-01

Thai pharmacy education consists of two undergraduate programs, a 5-year Bachelor of Science in Pharmacy (BScPsci and BScPcare) degree and a 6-year Doctor of Pharmacy (Pharm D). Pharmacy students who wish to serve in the public sector need to enroll in the public service program. This study aims to compare the perception of professional competency among new pharmacy graduates from the three different pharmacy programs available in 2013 who enrolled in the public service program. A cross-sectional survey was conducted among new pharmacy graduates in 2013 using a self-administered, structured, close-ended questionnaire. The questionnaire consisted of respondents' characteristics and perception of professional competencies. The competency questions consisted of 13 items with a 5-point scale. Data collection was conducted during Thailand's annual health professional meeting on April 2, 2013 for workplace selection of pharmacy graduates. A total of 266 new pharmacy graduates responded to the questionnaire (response rate 49.6%). There were no significant differences in sex and admission modes across the three pharmacy programs. Pharm D graduates reported highest competency in acute care services, medication reconciliation services, and primary care services among the other two programs. BScPsci graduates reported more competence in consumer health protection and herbal and alternative medicines than BScPcare graduates. There were significant differences in three competency domains: patient care, consumer protection and community health services, and drug review and information, but no significant differences in the health administration and communication domain among three pharmacy programs. Despite a complete change into a 6-year Pharm D program in 2014, pharmacy education in Thailand should continue evolving to be responsive to the needs of the health system. An annual survey of new pharmacy graduates should be continued, to monitor changes of professional competency across different program tracks and other factors which may influence their contribution to the health service system. Likewise, a longitudinal monitoring of their competencies in the graduate cohort should be conducted.

A Computer-Aided Approach for Designing Edge-Slot Waveguide Arrays

NASA Technical Reports Server (NTRS)

Gosselin, Renee Brian

2003-01-01

Traditional techniques for designing resonant edge-slot waveguide arrays have required an iterative trial-and-error process of measuring slot data from several prototypes. Since very little meaningful data has been published, this technology remains relatively immature and prohibitive for many smaller programs that could benefit from some advantages this antenna has to offer. A new Computer-Aided Design technique for designing resonant edge-slot waveguide arrays was used to successfuliy design such an X-band radiometer antenna for the NASA Light Rainfall Radiometer (LRR) instrument. Having the ability to rapidly create such an extremely accurate and efficient antenna design without the need to manufacture prototypes has also enabled inexpensive research that promises to improve the system-level performance of microwave radiometers for upcoming space-flight missions. This paper will present details of the LRR antenna design and describe some other current edge-slot array accomplishments at Goddard Space Flight Center.

Porous plug for reducing orifice induced pressure error in airfoils

NASA Technical Reports Server (NTRS)

Plentovich, Elizabeth B. (Inventor); Gloss, Blair B. (Inventor); Eves, John W. (Inventor); Stack, John P. (Inventor)

1988-01-01

A porous plug is provided for the reduction or elimination of positive error caused by the orifice during static pressure measurements of airfoils. The porous plug is press fitted into the orifice, thereby preventing the error caused either by fluid flow turning into the exposed orifice or by the fluid flow stagnating at the downstream edge of the orifice. In addition, the porous plug is made flush with the outer surface of the airfoil, by filing and polishing, to provide a smooth surface which alleviates the error caused by imperfections in the orifice. The porous plug is preferably made of sintered metal, which allows air to pass through the pores, so that the static pressure measurements can be made by remote transducers.

Quantifying acoustic doppler current profiler discharge uncertainty: A Monte Carlo based tool for moving-boat measurements

USGS Publications Warehouse

Mueller, David S.

2017-01-01

This paper presents a method using Monte Carlo simulations for assessing uncertainty of moving-boat acoustic Doppler current profiler (ADCP) discharge measurements using a software tool known as QUant, which was developed for this purpose. Analysis was performed on 10 data sets from four Water Survey of Canada gauging stations in order to evaluate the relative contribution of a range of error sources to the total estimated uncertainty. The factors that differed among data sets included the fraction of unmeasured discharge relative to the total discharge, flow nonuniformity, and operator decisions about instrument programming and measurement cross section. As anticipated, it was found that the estimated uncertainty is dominated by uncertainty of the discharge in the unmeasured areas, highlighting the importance of appropriate selection of the site, the instrument, and the user inputs required to estimate the unmeasured discharge. The main contributor to uncertainty was invalid data, but spatial inhomogeneity in water velocity and bottom-track velocity also contributed, as did variation in the edge velocity, uncertainty in the edge distances, edge coefficients, and the top and bottom extrapolation methods. To a lesser extent, spatial inhomogeneity in the bottom depth also contributed to the total uncertainty, as did uncertainty in the ADCP draft at shallow sites. The estimated uncertainties from QUant can be used to assess the adequacy of standard operating procedures. They also provide quantitative feedback to the ADCP operators about the quality of their measurements, indicating which parameters are contributing most to uncertainty, and perhaps even highlighting ways in which uncertainty can be reduced. Additionally, QUant can be used to account for self-dependent error sources such as heading errors, which are a function of heading. The results demonstrate the importance of a Monte Carlo method tool such as QUant for quantifying random and bias errors when evaluating the uncertainty of moving-boat ADCP measurements.

Dimensionless, Scale Invariant, Edge Weight Metric for the Study of Complex Structural Networks

PubMed Central

Colon-Perez, Luis M.; Spindler, Caitlin; Goicochea, Shelby; Triplett, William; Parekh, Mansi; Montie, Eric; Carney, Paul R.; Price, Catherine; Mareci, Thomas H.

2015-01-01

High spatial and angular resolution diffusion weighted imaging (DWI) with network analysis provides a unique framework for the study of brain structure in vivo. DWI-derived brain connectivity patterns are best characterized with graph theory using an edge weight to quantify the strength of white matter connections between gray matter nodes. Here a dimensionless, scale-invariant edge weight is introduced to measure node connectivity. This edge weight metric provides reasonable and consistent values over any size scale (e.g. rodents to humans) used to quantify the strength of connection. Firstly, simulations were used to assess the effects of tractography seed point density and random errors in the estimated fiber orientations; with sufficient signal-to-noise ratio (SNR), edge weight estimates improve as the seed density increases. Secondly to evaluate the application of the edge weight in the human brain, ten repeated measures of DWI in the same healthy human subject were analyzed. Mean edge weight values within the cingulum and corpus callosum were consistent and showed low variability. Thirdly, using excised rat brains to study the effects of spatial resolution, the weight of edges connecting major structures in the temporal lobe were used to characterize connectivity in this local network. The results indicate that with adequate resolution and SNR, connections between network nodes are characterized well by this edge weight metric. Therefore this new dimensionless, scale-invariant edge weight metric provides a robust measure of network connectivity that can be applied in any size regime. PMID:26173147

Dimensionless, Scale Invariant, Edge Weight Metric for the Study of Complex Structural Networks.

PubMed

Colon-Perez, Luis M; Spindler, Caitlin; Goicochea, Shelby; Triplett, William; Parekh, Mansi; Montie, Eric; Carney, Paul R; Price, Catherine; Mareci, Thomas H

2015-01-01

High spatial and angular resolution diffusion weighted imaging (DWI) with network analysis provides a unique framework for the study of brain structure in vivo. DWI-derived brain connectivity patterns are best characterized with graph theory using an edge weight to quantify the strength of white matter connections between gray matter nodes. Here a dimensionless, scale-invariant edge weight is introduced to measure node connectivity. This edge weight metric provides reasonable and consistent values over any size scale (e.g. rodents to humans) used to quantify the strength of connection. Firstly, simulations were used to assess the effects of tractography seed point density and random errors in the estimated fiber orientations; with sufficient signal-to-noise ratio (SNR), edge weight estimates improve as the seed density increases. Secondly to evaluate the application of the edge weight in the human brain, ten repeated measures of DWI in the same healthy human subject were analyzed. Mean edge weight values within the cingulum and corpus callosum were consistent and showed low variability. Thirdly, using excised rat brains to study the effects of spatial resolution, the weight of edges connecting major structures in the temporal lobe were used to characterize connectivity in this local network. The results indicate that with adequate resolution and SNR, connections between network nodes are characterized well by this edge weight metric. Therefore this new dimensionless, scale-invariant edge weight metric provides a robust measure of network connectivity that can be applied in any size regime.

Dwell time method based on Richardson-Lucy algorithm

NASA Astrophysics Data System (ADS)

Jiang, Bo; Ma, Zhen

2017-10-01

When the noise in the surface error data given by the interferometer has no effect on the iterative convergence of the RL algorithm, the RL algorithm for deconvolution in image restoration can be applied to the CCOS model to solve the dwell time. By extending the initial error function on the edge and denoising the noise in the surface error data given by the interferometer , it makes the result more available . The simulation results show the final residual error 10.7912nm nm in PV and 0.4305 nm in RMS, when the initial surface error is 107.2414 nm in PV and 15.1331 nm in RMS. The convergence rates of the PV and RMS values can reach up to 89.9% and 96.0%, respectively . The algorithms can satisfy the requirement of fabrication very well.

LLSURE: local linear SURE-based edge-preserving image filtering.

PubMed

Qiu, Tianshuang; Wang, Aiqi; Yu, Nannan; Song, Aimin

2013-01-01

In this paper, we propose a novel approach for performing high-quality edge-preserving image filtering. Based on a local linear model and using the principle of Stein's unbiased risk estimate as an estimator for the mean squared error from the noisy image only, we derive a simple explicit image filter which can filter out noise while preserving edges and fine-scale details. Moreover, this filter has a fast and exact linear-time algorithm whose computational complexity is independent of the filtering kernel size; thus, it can be applied to real time image processing tasks. The experimental results demonstrate the effectiveness of the new filter for various computer vision applications, including noise reduction, detail smoothing and enhancement, high dynamic range compression, and flash/no-flash denoising.

Collaborative Cyber-infrastructures for the Management of the UNESCO-IGCP Research Project "Forecast of tephra fallout"

NASA Astrophysics Data System (ADS)

Folch, A.; Costa, A.; Cordoba, G.

2009-04-01

Tephra fallout following explosive volcanic eruptions produces several hazardous effects on inhabitants, infrastructure, and property and represents a serious threat for communities located around active volcanoes. In order to mitigate the effects on the surrounding areas, scientists and civil decision-making authorities need reliable short-term forecasts during episodes of eruptive crisis and long-term probabilistic maps to plan territorial policies and land use. Modelling, together with field studies and volcano monitoring, constitutes an indispensable tool to achieve these objectives. The UNESCO-IGCP research project proposal "Forecast of tephra fallout" has the aim to produce a series of tools capable to elaborate both short-term forecasts and long-term hazard assessments using the cutting-edge models for tephra transport and sedimentation. A special project website will be designed to supply a set of models, procedures and expertise to several Latino-American Institutes based in countries seriously threatened by this geo-hazard (Argentina, Chile, Colombia, Ecuador, Mexico, and Nicaragua). This will proportionate to the final users a tool to elaborate short-term forecasts of tephra deposition on the ground, and determine airborne ash concentrations (a quantity of special relevance for aerial navigation safety) during eruptions and emergencies. The project web-site will have a public section and a password-protected area to exchange information and data among participants and, eventually, to allow remote execution of high-resolution mesoscale meteorological forecasts at the BSC facilities. The public website section will be updated periodically and will include sections describing the project objectives and achievements as well as the hazard maps for the investigated volcanoes, and will be linked to other relevant websites such as IAVCEI, IGCP, IUGS and UNESCO homepages. A part of the public section of the website will be devoted to disseminate achieved scientific results, provide general advice, and display hazard maps to a larger public beyond the scientific community. The website private section will include a software and documentation download section as well as a gateway to run the WRF mesoscale meteorological model and the parallel version of the FALL3D model at the BSC facilities. It will be invaluable during an eventual emergency if the affected institution does not yet have an agreement with its national weather service.

Constructing a strategy map for banking institutions with key performance indicators of the balanced scorecard.

PubMed

Wu, Hung-Yi

2012-08-01

This study presents a structural evaluation methodology to link key performance indicators (KPIs) into a strategy map of the balanced scorecard (BSC) for banking institutions. Corresponding with the four BSC perspectives (finance, customer, internal business process, and learning and growth), the most important evaluation indicators of banking performance are synthesized from the relevant literature and screened by a committee of experts. The Decision Making Trial and Evaluation Laboratory (DEMATEL) method, a multiple criteria analysis tool, is then employed to determine the causal relationships between the KPIs, to identify the critical central and influential factors, and to establish a visualized strategy map with logical links to improve banking performance. An empirical application is provided as an example. According to the expert evaluations, the three most essential KPIs for banking performance are customer satisfaction, sales performance, and customer retention rate. The DEMATEL results demonstrate a clear road map to assist management in prioritizing the performance indicators and in focusing attention on the strategy-related activities of the crucial indicators. According to the constructed strategy map, management could better invest limited resources in the areas that need improvement most. Although these strategy maps of the BSC are not universal, the research results show that the presented approach is an objective and feasible way to construct strategy maps more justifiably. The proposed framework can be applicable to institutions in other industries as well. Copyright © 2011 Elsevier Ltd. All rights reserved.

Teaching Scientists to Communicate: Evidence-based assessment for undergraduate science education

NASA Astrophysics Data System (ADS)

Mercer-Mapstone, Lucy; Kuchel, Louise

2015-07-01

Communication skills are one of five nationally recognised learning outcomes for an Australian Bachelor of Science (BSc) degree. Previous evidence indicates that communication skills taught in Australian undergraduate science degrees are not developed sufficiently to meet the requirements of the modern-day workplace-a problem faced in the UK and USA also. Curriculum development in this area, however, hinges on first evaluating how communication skills are taught currently as a base from which to make effective changes. This study aimed to quantify the current standard of communication education within BSc degrees at Australian research-intensive universities. A detailed evidential baseline for not only what but also how communication skills are being taught was established. We quantified which communication skills were taught and assessed explicitly, implicitly, or were absent in a range of undergraduate science assessment tasks (n = 35) from four research-intensive Australian universities. Results indicate that 10 of the 12 core science communication skills used for evaluation were absent from more than 50% of assessment tasks and 77.14% of all assessment tasks taught less than 5 core communication skills explicitly. The design of assessment tasks significantly affected whether communication skills were taught explicitly. Prominent trends were that communication skills in tasks aimed at non-scientific audiences were taught more explicitly than in tasks aimed at scientific audiences, and the majority of group and multimedia tasks taught communication elements more explicitly than individual, or written and oral tasks. Implications for science communication in the BSc and further research are discussed.

Building America Case Study: Meeting DOE Challenge Home Program Certification, Chicago, Illinois; Denver, Colorado; Devens, Massachusetts (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America Program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three Cold Climate production builders in three separate US cities. BSC worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Therefore, the resulting design packages do vary from builder to builder. BSC provided support through this research project on the design, construction and performance testing ofmore » the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive or performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: 1. Adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor. 2. Increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense Efficient Hot Water Distribution requirement.« less

Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerrigan, P.

2014-03-01

BSC worked directly with the David Weekley Homes - Houston division to redesign three floor plans in order to locate the HVAC system in conditioned space. The purpose of this project is to develop a cost effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses. This is in preparation for the upcoming code changes in 2015. The builder wishes to develop an upgrade package that will allow for a seamless transition to the new code mandate. The followingmore » research questions were addressed by this research project: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost? BSC and the builder developed a duct design strategy that employs a system of dropped ceilings and attic coffers for moving the ductwork from the vented attic to conditioned space. The furnace has been moved to either a mechanical closet in the conditioned living space or a coffered space in the attic.« less

Evaluation of the U.S. Department of Energy Challenge Home Program Certification of Production Builders

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerrigan, P.; Loomis, H.

2014-09-01

The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America Program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three Cold Climate production builders in three separate US cities. BSC worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Therefore, the resulting design packages do vary from builder to builder. BSC provided support through this research project on the design, construction and performance testing ofmore » the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive or performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: 1. Adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor; 2. Increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense(R) Efficient Hot Water Distribution requirement.« less

HVAC Design Strategy for a Hot-Humid Production Builder, Houston, Texas (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

BSC worked directly with the David Weekley Homes - Houston division to redesign three floor plans in order to locate the HVAC system in conditioned space. The purpose of this project is to develop a cost effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses. This is in preparation for the upcoming code changes in 2015. The builder wishes to develop an upgrade package that will allow for a seamless transition to the new code mandate. The followingmore » research questions were addressed by this research project: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost? BSC and the builder developed a duct design strategy that employs a system of dropped ceilings and attic coffers for moving the ductwork from the vented attic to conditioned space. The furnace has been moved to either a mechanical closet in the conditioned living space or a coffered space in the attic.« less

Combining genetic and evolutionary engineering to establish C4 metabolism in C3 plants.

PubMed

Li, Yuanyuan; Heckmann, David; Lercher, Martin J; Maurino, Veronica G

2017-01-01

To feed a world population projected to reach 9 billion people by 2050, the productivity of major crops must be increased by at least 50%. One potential route to boost the productivity of cereals is to equip them genetically with the 'supercharged' C 4 type of photosynthesis; however, the necessary genetic modifications are not sufficiently understood for the corresponding genetic engineering programme. In this opinion paper, we discuss a strategy to solve this problem by developing a new paradigm for plant breeding. We propose combining the bioengineering of well-understood traits with subsequent evolutionary engineering, i.e. mutagenesis and artificial selection. An existing mathematical model of C 3 -C 4 evolution is used to choose the most promising path towards this goal. Based on biomathematical simulations, we engineer Arabidopsis thaliana plants that express the central carbon-fixing enzyme Rubisco only in bundle sheath cells (Ru-BSC plants), the localization characteristic for C 4 plants. This modification will initially be deleterious, forcing the Ru-BSC plants into a fitness valley from where previously inaccessible adaptive steps towards C 4 photosynthesis become accessible through fitness-enhancing mutations. Mutagenized Ru-BSC plants are then screened for improved photosynthesis, and are expected to respond to imposed artificial selection pressures by evolving towards C 4 anatomy and biochemistry. © The Author 2016. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Aerosol Optical Depth over Europe: Evaluation of the CALIOPE air quality modelling system with direct-sun AERONET observations

NASA Astrophysics Data System (ADS)

Basart, Sara; Pay, María. Teresa; Pérez, Carlos; Cuevas, Emilio; Jorba, Oriol; Piot, Matthias; María Baldasano, Jose

2010-05-01

In the frame of the CALIOPE project (Baldasano et al., 2008), the Barcelona Supercomputing Center (BSC-CNS) currently operates a high-resolution air quality forecasting system based on daily photochemical forecasts in Europe (12km x 12km resolution) with the WRF-ARW/HERMES/CMAQ modelling system (http://www.bsc.es/caliope) and desert dust forecasts over Southern Europe with BSC-DREAM8b (Pérez et al., 2006; http://www.bsc.es/projects/earthscience/DREAM). High resolution simulations and forecasts are possible through their implementation on MareNostrum supercomputer at BSC-CNS. As shown in previous air quality studies (e.g. Rodríguez et al., 2001; Jiménez-Guerrero et al., 2008), the contribution of desert dust on particulate matter levels in Southern Europe is remarkable due to its proximity to African desert dust sources. When considering only anthropogenic emissions (Baldasano et al., 2008) and the current knowledge about aerosol physics and chemistry, chemistry-transport model simulations underestimate the PM10 concentrations by 30-50%. As a first approach, the natural dust contribution from BSC-DREAM8b is on-line added to the anthropogenic aerosol output of CMAQ. The aim of the present work is the quantitative evaluation of the WRF-ARW/HERMES/ CMAQ/BSC-DREAM8b forecast system to simulate the Aerosol Optical Depth (AOD) over Europe. The performance of the modelled AOD has been quantitatively evaluated with discrete and categorical (skill scores) statistics by a comparison to direct-sun AERONET observations for 2004. The contribution of different types of aerosols will be analyzed by means of the O'Neill fine mode AOD products (O'Neill et al., 2001). A previous aerosol characterization of AERONET data was performed (Basart et al., 2009) in order to discriminate the different aerosol source contributions within the study region. The results indicate a remarkable improvement in the discrete and skill-scores evaluation (accuracy, critical success index and probability of detection) of AOD when using CMAQ+DREAM8b compared to CMAQ-alone simulations. An accurate analysis of the relative contributions of anthropogenic aerosols and desert dust to AOD over Europe and their seasonality will be also presented. References: Baldasano J.M, P. Jiménez-Guerrero, O. Jorba, C. Pérez, E. López, P. Güereca, F. Martin, M. García-Vivanco, I. Palomino, X. Querol, M. Pandolfi, M.J. Sanz and J.J. Diéguez: "CALIOPE: An operational air quality forecasting system for the Iberian Peninsula, Balearic Islands and Canary Islands- First annual evaluation and ongoing developments", Adv. Sci. and Res., 2: 89-98, 2008. Baldasano J.M., L. P. Güereca, E. López, S. Gassó, P. Jimenez-Guerrero. "Development of a high resolution (1 km x 1 km, 1 h) emission model for Spain: the High-Elective Resolution Modelling Emission System (HERMES)". Atmospheric Environment, 42: 7215-7233 doi: 10.1016/j.atmosenv.2008.07.026, 2008. Basart, S., Pérez, C., Cuevas, E., Baldasano, J. M. and Gobbi, G. P. "Aerosol characterization in Northern Africa, Northeastern Atlantic, Mediterranean Basin and Middle East from direct-sun AERONET observations", Atmos. Chem. Phys.., 9, 7707-7745, 2009. Jiménez-Guerrero, P., Pérez, C., Jorba, O. and Baldasano, J. M. "Contribution of Saharan dust in an integrated air quality system and its on-line assessment", Geophys. Res. Lett., 35(3), 2008. O'Neill, N. T., Dubovik, O., and Eck, T. F.: A modified Angstrom coefficient for the characterization of sub-micron aerosols, App. Opt., 40(14), 2368-2375, 2001. Pérez, C., Nickovic, S., Pejanovic, G., Baldasano, J. M. and Ozsoy, E. "Interactive dust-radiation modeling: A step to improve weather forecasts", Geophys. Res., 11(D16206),doi:10.1029/2005JD006717, 2006. Rodríguez, S., Querol, X., Alastuey, A., Kallos, G. and Kakaliagou, O. "Saharan dust contributions to PM10 and TSP levels in Southern and Eastern Spain", Atmos. Environ., 35, 2433-2447, 2001.

System Characterization Results for the QuickBird Sensor

NASA Technical Reports Server (NTRS)

Holekamp, Kara; Ross, Kenton; Blonski, Slawomir

2007-01-01

An overall system characterization was performed on several DigitalGlobe' QuickBird image products by the NASA Applied Research & Technology Project Office (formerly the Applied Sciences Directorate) at the John C. Stennis Space Center. This system characterization incorporated geopositional accuracy assessments, a spatial resolution assessment, and a radiometric calibration assessment. Geopositional assessments of standard georeferenced multispectral products were obtained using an array of accurately surveyed geodetic targets evenly spaced throughout a scene. Geopositional accuracy was calculated in terms of circular error. Spatial resolution of QuickBird panchromatic imagery was characterized based on edge response measurements using edge targets and the tilted-edge technique. Relative edge response was estimated as a geometric mean of normalized edge response differences measured in two directions of image pixels at points distanced from the edge by -0.5 and 0.5 of ground sample distance. A reflectance-based vicarious calibration approach, based on ground-based measurements and radiative transfer calculations, was used to estimate at-sensor radiance. These values were compared to those measured by the sensor to determine the sensor's radiometric accuracy. All imagery analyzed was acquired between fall 2005 and spring 2006. These characterization results were compared to previous years' results to identify any temporal drifts or trends.

Band-edge engineering of Silicon by Surface Functionalization: a Combined Ab-initio and Photoemission Study

NASA Astrophysics Data System (ADS)

Li, Yan; O'Leary, Leslie; Lewis, Nathan; Galli, Giulia

2012-02-01

The electrode material choice is limited in solar to fuel formation devices because of the requirement of band-edge matching to the fixed fuel formation potential. This limitation can be relieved via band-edge engineering. The changes of band-edge positions of Si electrodes induced by the adsorption of H-, Cl-, Br- and short-chain alkyl groups were investigated by combining density functional (DFT), many-body perturbation theory (MBPT), and ultraviolet photoelectron spectroscopy. The band edge shifts are related to the formation of surface dipole moments, and determine the barrier height of electrons and holes in doped silicon surfaces. We find that the trends of the sign and magnitude of the computed surface dipoles as a function of the adsorbate may be explained by simple electronegative rules. We show that quasi-particle energies obtained within MBPT are in good agreement with experiment, while DFT values may exhibit substantial errors. However computed band edge differences are in good agreement with spectroscopic and electrical measurements even at the DFT level of theory. [1] Y. Li and G. Galli, Phys. Rev. B 82, 045321 (2010). [2] Y. Li, L. O'Leary, N. Lewis and G. Galli, to be submitted.

MuSCoWERT: multi-scale consistence of weighted edge Radon transform for horizon detection in maritime images.

PubMed

Prasad, Dilip K; Rajan, Deepu; Rachmawati, Lily; Rajabally, Eshan; Quek, Chai

2016-12-01

This paper addresses the problem of horizon detection, a fundamental process in numerous object detection algorithms, in a maritime environment. The maritime environment is characterized by the absence of fixed features, the presence of numerous linear features in dynamically changing objects and background and constantly varying illumination, rendering the typically simple problem of detecting the horizon a challenging one. We present a novel method called multi-scale consistence of weighted edge Radon transform, abbreviated as MuSCoWERT. It detects the long linear features consistent over multiple scales using multi-scale median filtering of the image followed by Radon transform on a weighted edge map and computing the histogram of the detected linear features. We show that MuSCoWERT has excellent performance, better than seven other contemporary methods, for 84 challenging maritime videos, containing over 33,000 frames, and captured using visible range and near-infrared range sensors mounted onboard, onshore, or on floating buoys. It has a median error of about 2 pixels (less than 0.2%) from the center of the actual horizon and a median angular error of less than 0.4 deg. We are also sharing a new challenging horizon detection dataset of 65 videos of visible, infrared cameras for onshore and onboard ship camera placement.

76 FR 76416 - Request for Nominations of Candidates To Serve on the Board of Scientific Counselors (BSC...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-07

... epidemiology, microbiology, bacteriology, virology, parasitology, mycology, immunology, public health, entomology, clinical medicine, and veterinary medicine, as well as from the general public. Members may be...

77 FR 31359 - Board of Scientific Counselors, National Center for Health Statistics (BSC, NCHS)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-25

...., Director of Extramural Research, NCHS/CDC, 3311 Toledo Road, Room 7208, Hyattsville, Maryland 20782... Services Office, has been delegated the authority to sign Federal Register notices pertaining to...

77 FR 67651 - Board of Scientific Counselors, Office of Infectious Diseases (BSC, OID)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-13

... the National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention, CDC, in the following areas... addressing pertussis and implementing new recommendations for reducing hepatitis C virus morbidity and...

77 FR 58847 - Board of Scientific Counselors, National Center for Injury Prevention and Control (BSC, NCIPC)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-24

... the causes, diagnosis, treatment, control, and prevention of physical and mental diseases, and other..., reorganization and partnerships; Science Update; health communication; global activities; Research to Practice...

Edge-preserving image compression for magnetic-resonance images using dynamic associative neural networks (DANN)-based neural networks

NASA Astrophysics Data System (ADS)

Wan, Tat C.; Kabuka, Mansur R.

1994-05-01

With the tremendous growth in imaging applications and the development of filmless radiology, the need for compression techniques that can achieve high compression ratios with user specified distortion rates becomes necessary. Boundaries and edges in the tissue structures are vital for detection of lesions and tumors, which in turn requires the preservation of edges in the image. The proposed edge preserving image compressor (EPIC) combines lossless compression of edges with neural network compression techniques based on dynamic associative neural networks (DANN), to provide high compression ratios with user specified distortion rates in an adaptive compression system well-suited to parallel implementations. Improvements to DANN-based training through the use of a variance classifier for controlling a bank of neural networks speed convergence and allow the use of higher compression ratios for `simple' patterns. The adaptation and generalization capabilities inherent in EPIC also facilitate progressive transmission of images through varying the number of quantization levels used to represent compressed patterns. Average compression ratios of 7.51:1 with an averaged average mean squared error of 0.0147 were achieved.

Adaptive local thresholding for robust nucleus segmentation utilizing shape priors

NASA Astrophysics Data System (ADS)

Wang, Xiuzhong; Srinivas, Chukka

2016-03-01

This paper describes a novel local thresholding method for foreground detection. First, a Canny edge detection method is used for initial edge detection. Then, tensor voting is applied on the initial edge pixels, using a nonsymmetric tensor field tailored to encode prior information about nucleus size, shape, and intensity spatial distribution. Tensor analysis is then performed to generate the saliency image and, based on that, the refined edge. Next, the image domain is divided into blocks. In each block, at least one foreground and one background pixel are sampled for each refined edge pixel. The saliency weighted foreground histogram and background histogram are then created. These two histograms are used to calculate a threshold by minimizing the background and foreground pixel classification error. The block-wise thresholds are then used to generate the threshold for each pixel via interpolation. Finally, the foreground is obtained by comparing the original image with the threshold image. The effective use of prior information, combined with robust techniques, results in far more reliable foreground detection, which leads to robust nucleus segmentation.

Adaptive color demosaicing and false color removal

NASA Astrophysics Data System (ADS)

Guarnera, Mirko; Messina, Giuseppe; Tomaselli, Valeria

2010-04-01

Color interpolation solutions drastically influence the quality of the whole image generation pipeline, so they must guarantee the rendering of high quality pictures by avoiding typical artifacts such as blurring, zipper effects, and false colors. Moreover, demosaicing should avoid emphasizing typical artifacts of real sensors data, such as noise and green imbalance effect, which would be further accentuated by the subsequent steps of the processing pipeline. We propose a new adaptive algorithm that decides the interpolation technique to apply to each pixel, according to its neighborhood analysis. Edges are effectively interpolated through a directional filtering approach that interpolates the missing colors, selecting the suitable filter depending on edge orientation. Regions close to edges are interpolated through a simpler demosaicing approach. Thus flat regions are identified and low-pass filtered to eliminate some residual noise and to minimize the annoying green imbalance effect. Finally, an effective false color removal algorithm is used as a postprocessing step to eliminate residual color errors. The experimental results show how sharp edges are preserved, whereas undesired zipper effects are reduced, improving the edge resolution itself and obtaining superior image quality.

The Effect of Leading-Edge Sweep and Surface Inclination on the Hypersonic Flow Field Over a Blunt Flat Plate

NASA Technical Reports Server (NTRS)

Creager, Marcus O.

1959-01-01

An investigation of the effects of variation of leading-edge sweep and surface inclination on the flow over blunt flat plates was conducted at Mach numbers of 4 and 5.7 at free-stream Reynolds numbers per inch of 6,600 and 20,000, respectively. Surface pressures were measured on a flat plate blunted by a semicylindrical leading edge over a range of sweep angles from 0 deg to 60 deg and a range of surface inclinations from -10 deg to +10 deg. The surface pressures were predicted within an average error of +/- 8 percent by a combination of blast-wave and boundary-layer theory extended herein to include effects of sweep and surface inclination. This combination applied equally well to similar data of other investigations. The local Reynolds number per inch was found to be lower than the free-stream Reynolds number per inch. The reduction in local Reynolds number was mitigated by increasing the sweep of the leading edge. Boundary-layer thickness and shock-wave shape were changed little by the sweep of the leading edge.

Holistic, model-based optimization of edge leveling as an enabler for lithographic focus control: application to a memory use case

NASA Astrophysics Data System (ADS)

Hasan, T.; Kang, Y.-S.; Kim, Y.-J.; Park, S.-J.; Jang, S.-Y.; Hu, K.-Y.; Koop, E. J.; Hinnen, P. C.; Voncken, M. M. A. J.

2016-03-01

Advancement of the next generation technology nodes and emerging memory devices demand tighter lithographic focus control. Although the leveling performance of the latest-generation scanners is state of the art, challenges remain at the wafer edge due to large process variations. There are several customer configurable leveling control options available in ASML scanners, some of which are application specific in their scope of leveling improvement. In this paper, we assess the usability of leveling non-correctable error models to identify yield limiting edge dies. We introduce a novel dies-inspec based holistic methodology for leveling optimization to guide tool users in selecting an optimal configuration of leveling options. Significant focus gain, and consequently yield gain, can be achieved with this integrated approach. The Samsung site in Hwaseong observed an improved edge focus performance in a production of a mid-end memory product layer running on an ASML NXT 1960 system. 50% improvement in focus and a 1.5%p gain in edge yield were measured with the optimized configurations.

Implementation of an online chemical mechanism within a global-regional atmospheric model: design and initial steps

NASA Astrophysics Data System (ADS)

Jorba, O.; Pérez, C.; Baldasano, J. M.

2009-04-01

Chemical processes in air quality modelling systems are usually treated independently from the meteorological models. This approach is computationally attractive since off-line chemical transport simulations only require a single meteorological dataset to produce many chemical simulations. However, this separation of chemistry and meteorology produces a loss of important information about atmospheric processes and does not allow for feedbacks between chemistry and meteorology. To take into account such processes current models are evolving to an online coupling of chemistry and meteorology to produce consistent chemical weather predictions. The Earth Sciences Department of the Barcelona Supercomputing Center (BSC) develops the NMMB/BSC-DUST (Pérez et al., 2008), an online dust model within the global-regional NCEP/NMMB numerical weather prediction model (Janjic and Black, 2007) under development at National Centers for Environmental Prediction (NCEP). Current implementation is based on the well established regional dust model and forecast system DREAM (Nickovic et al., 2001). The most relevant characteristics of NMMB/BSC-DUST are its on-line coupling of the dust scheme with the meteorological driver, the wide range of applications from meso to global scales, and the inclusion of dust radiative effects allowing feedbacks between aerosols and meteorology. In order to complement such development, BSC works also in the implementation of a fully coupled online chemical mechanism within NMMB/BSC-DUST. The final objective is to develop a fully chemical weather prediction system able to resolve gas-aerosol-meteorology interactions from global to local scales. In this contribution we will present the design of the chemistry coupling and the current progress of its implementation. Following the NCEP/NMMB approach, the chemistry part will be coupled through the Earth System Modeling Framework (ESMF) as a pluggable component. The chemical mechanism and chemistry solver is based on the Kinetic PreProcessor KPP (Sandu and Sander, 2006) package with the main purpose to maintain a wide flexibility when configuring the model. Such approach will allow using a simple general chemical mechanism for global applications or a more complex mechanism for regional to local applications at higher resolution. REFERENCES Janjic, Z.I., and Black, T.L., 2007. An ESMF unified model for a broad range of spatial and temporal scales, Geophysical Research Abstracts, 9, 05025. Nickovic, S., Papadopoulos, A., Kakaliagou, O., and Kallos, G., 2001. Model for prediciton of desert dust cycle in the atmosphere. J. Geophys. Res., 106, 18113-18129. Pérez, C., Haustein, K., Janjic, Z.I., Jorba, O., Baldasano, J.M., Black, T.L., and Nickovic, S., 2008. An online dust model within the meso to global NMMB: current progress and plans. AGU Fall Meeting, San Francisco, A41K-03, 2008. Sandu, A., and Sander, R., 2006. Technical note:Simulating chemical systems in Fortran90 and Matlab with the Kinetic PreProcessor KPP-2.1. Atmos. Chem. and Phys., 6, 187-195.

Predicting Life Expectancy for Pirfenidone in Idiopathic Pulmonary Fibrosis.

PubMed

Fisher, Mark; Nathan, Steven D; Hill, Christian; Marshall, Jade; Dejonckheere, Fred; Thuresson, Per-Olof; Maher, Toby M

2017-03-01

Conducting an adequately powered survival study in idiopathic pulmonary fibrosis (IPF) is challenging due to the rare nature of the disease and the need for extended follow-up. Consequently, registration trials of IPF treatments have not been designed to estimate long-term survival. To predict life expectancy for patients with IPF receiving pirfenidone versus best supportive care (BSC) in a population that met the inclusion criteria of patients enrolled in the ASCEND and CAPACITY trials. Kaplan-Meier survival data for pirfenidone and BSC were obtained from randomized controlled clinical studies (CAPACITY, ASCEND), an open-label extension study (RECAP), and the Inova Fairfax Hospital database. Data from the Inova registry were matched to the inclusion criteria of the CAPACITY and ASCEND trials. Life expectancy was estimated by the area under the curve of parametric survival distributions fit to the Kaplan-Meier data. Mean (95% confidence interval) life expectancy was calculated as 8.72 (7.65-10.15) years with pirfenidone and 6.24 (5.38-7.18) years with BSC. Therefore, pirfenidone improved life expectancy by 2.47 (1.26-4.17) years compared with BSC. In addition, treatment with pirfenidone recuperated 25% of the expected years of life lost due to IPF. Sensitivity analyses found that results were sensitive to the choice of parametric survival distribution, and alternative piecewise and parametric approaches. This analysis suggests that this population of patients with IPF has an improved life expectancy if treated with pirfenidone compared with BSC. This study was funded by InterMune International AG, a wholly owned Roche subsidiary since 2014. Fisher was previously employed by InterMune UK, a wholly owned Roche subsidiary, until July 2015. He is currently employed by FIECON, which has received funding from F. Hoffmann-La Roche for consulting services. Nathan has received consulting fees from Roche-Genentech and Boehringer Ingelheim. He is also on the speakers' bureau for Roche-Genentech and Boehringer Ingelheim and has received research funding from both companies. Hill was previously employed by InterMune UK until October 2014. Hill and Marshall are employees of MAP BioPharma, which has received funding from F. Hoffmann-La Roche for consulting services. Dejonckheere and Thuresson are employees of F. Hoffmann-La Roche. Maher has received grants, consulting fees, and speaker fees from GlaxoSmithKline and UCB, and grants from Novartis. He has also received consulting fees and speaker fees from AstraZeneca, Bayer, Biogen Idec, Boehringer Ingelheim, Cipla, Lanthio, InterMune International AG, F. Hoffmann-La Roche, Sanofi-Aventis, and Takeda. Maher is supported by a National Institute for Health Research Clinician Scientist Fellowship (NIHR Ref: CS: -2013-13-017). Study concept and design were contributed by Fisher, Hill, Marshall, and Dejonckheere. Fisher, Nathan, and Thuresson collected the data, along with Hill and Marshall. Data interpretation was performed by Fisher, Maher, Nathan, and Dejonckheere. The manuscript was written primarily by Fisher, along with Maher and Dejonckheere, and revised by Fisher and Maher, along with the other authors.

Classical simulation of quantum error correction in a Fibonacci anyon code

NASA Astrophysics Data System (ADS)

Burton, Simon; Brell, Courtney G.; Flammia, Steven T.

2017-02-01

Classically simulating the dynamics of anyonic excitations in two-dimensional quantum systems is likely intractable in general because such dynamics are sufficient to implement universal quantum computation. However, processes of interest for the study of quantum error correction in anyon systems are typically drawn from a restricted class that displays significant structure over a wide range of system parameters. We exploit this structure to classically simulate, and thereby demonstrate the success of, an error-correction protocol for a quantum memory based on the universal Fibonacci anyon model. We numerically simulate a phenomenological model of the system and noise processes on lattice sizes of up to 128 ×128 sites, and find a lower bound on the error-correction threshold of approximately 0.125 errors per edge, which is comparable to those previously known for Abelian and (nonuniversal) non-Abelian anyon models.

Local gray level S-curve transformation - A generalized contrast enhancement technique for medical images.

PubMed

Gandhamal, Akash; Talbar, Sanjay; Gajre, Suhas; Hani, Ahmad Fadzil M; Kumar, Dileep

2017-04-01

Most medical images suffer from inadequate contrast and brightness, which leads to blurred or weak edges (low contrast) between adjacent tissues resulting in poor segmentation and errors in classification of tissues. Thus, contrast enhancement to improve visual information is extremely important in the development of computational approaches for obtaining quantitative measurements from medical images. In this research, a contrast enhancement algorithm that applies gray-level S-curve transformation technique locally in medical images obtained from various modalities is investigated. The S-curve transformation is an extended gray level transformation technique that results into a curve similar to a sigmoid function through a pixel to pixel transformation. This curve essentially increases the difference between minimum and maximum gray values and the image gradient, locally thereby, strengthening edges between adjacent tissues. The performance of the proposed technique is determined by measuring several parameters namely, edge content (improvement in image gradient), enhancement measure (degree of contrast enhancement), absolute mean brightness error (luminance distortion caused by the enhancement), and feature similarity index measure (preservation of the original image features). Based on medical image datasets comprising 1937 images from various modalities such as ultrasound, mammograms, fluorescent images, fundus, X-ray radiographs and MR images, it is found that the local gray-level S-curve transformation outperforms existing techniques in terms of improved contrast and brightness, resulting in clear and strong edges between adjacent tissues. The proposed technique can be used as a preprocessing tool for effective segmentation and classification of tissue structures in medical images. Copyright © 2017 Elsevier Ltd. All rights reserved.

Segmentation of corneal endothelium images using a U-Net-based convolutional neural network.

PubMed

Fabijańska, Anna

2018-04-18

Diagnostic information regarding the health status of the corneal endothelium may be obtained by analyzing the size and the shape of the endothelial cells in specular microscopy images. Prior to the analysis, the endothelial cells need to be extracted from the image. Up to today, this has been performed manually or semi-automatically. Several approaches to automatic segmentation of endothelial cells exist; however, none of them is perfect. Therefore this paper proposes to perform cell segmentation using a U-Net-based convolutional neural network. Particularly, the network is trained to discriminate pixels located at the borders between cells. The edge probability map outputted by the network is next binarized and skeletonized in order to obtain one-pixel wide edges. The proposed solution was tested on a dataset consisting of 30 corneal endothelial images presenting cells of different sizes, achieving an AUROC level of 0.92. The resulting DICE is on average equal to 0.86, which is a good result, regarding the thickness of the compared edges. The corresponding mean absolute percentage error of cell number is at the level of 4.5% which confirms the high accuracy of the proposed approach. The resulting cell edges are well aligned to the ground truths and require a limited number of manual corrections. This also results in accurate values of the cell morphometric parameters. The corresponding errors range from 5.2% for endothelial cell density, through 6.2% for cell hexagonality to 11.93% for the coefficient of variation of the cell size. Copyright © 2018 Elsevier B.V. All rights reserved.

77 FR 24714 - Meeting of the National Toxicology Program (NTP) Board of Scientific Counselors

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-25

... public and private sectors that provides primary scientific oversight to the NTP and evaluates the... private sectors that provides primary scientific oversight to the NTP. Specifically, the BSC advises the...

76 FR 68461 - Meeting of the National Toxicology Program (NTP) Board of Scientific Counselors

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-04

... public and private sectors that provides primary scientific oversight to the NTP and evaluates the... private sectors that provides primary scientific oversight to the NTP. Specifically, the BSC advises the...

Conflict Resolution and Optimization of Multiple-Satellite Systems (CROMSAT)

DTIC Science & Technology

2007-06-01

Brett N. Laboo Major, Australian Army B.Sc., University of New South Wales (Australian Defence Force Academy), 1994 Submitted in partial...10 a. Transition Diagram ..................................................... 10 b. Languages and Grammars ... Grammars .................................................... 14 6. Language Similarities............................................................ 16

78 FR 75925 - Request for Nominations of Candidates To Serve on the Board of Scientific Counselors, National...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-13

... form of reports or verbal communications to the NIOSH Director during BSC meetings. Nominations are..., epidemiology, biostatistics, and psychology. Federal employees will not be considered for membership. Members...

75 FR 43172 - Board of Scientific Counselors, National Center for Environmental Health/Agency for Toxic...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-23

...., Designated Federal Officer, BSC, NCEH/ATSDR, 1600 Clifton Road, NE, Mailstop E-28, Atlanta, Georgia 30333... the authority to sign Federal Register notices pertaining to announcements of meetings and other...

76 FR 65729 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... Hazard Evaluations; (3) Occupational Safety and Health Workforce Needs Assessment; (4) and Future...) address current, relevant needs; and (3) produce intended results. Matters To Be Discussed: The agenda...

Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerrigan, P.

2014-03-01

Building Science Corporation (BSC) worked directly with the David Weekley Homes - Houston division to develop a cost-effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses in preparation for the upcoming code changes in 2015. This research project addressed the following questions: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences?more » 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost?« less

Effects of Artificial Viscosity on the Accuracy of High-reynolds-number Kappa-epsilon Turbulence Model

NASA Technical Reports Server (NTRS)

Chitsomboon, Tawit

1994-01-01

Wall functions, as used in the typical high Reynolds number k-epsilon turbulence model, can be implemented in various ways. A least disruptive method (to the flow solver) is to directly solve for the flow variables at the grid point next to the wall while prescribing the values of k and epsilon. For the centrally-differenced finite-difference scheme employing artificial viscocity (AV) as a stabilizing mechanism, this methodology proved to be totally useless. This is because the AV gives rise to a large error at the wall due to too steep a velocity gradient resulting from the use of a coarse grid as required by the wall function methodology. This error can be eliminated simply by extrapolating velocities at the wall, instead of using the physical values of the no-slip velocities (i.e. the zero value). The applicability of the technique used in this paper is demonstrated by solving a flow over a flat plate and comparing the results with those of experiments. It was also observed that AV gives rise to a velocity overshoot (about 1 percent) near the edge of the boundary layer. This small velocity error, however, can yield as much as 10 percent error in the momentum thickness. A method which integrates the boundary layer up to only the edge of the boundary (instead of infinity) was proposed and demonstrated to give better results than the standard method.

QUADRATIC SERENDIPITY FINITE ELEMENTS ON POLYGONS USING GENERALIZED BARYCENTRIC COORDINATES

PubMed Central

RAND, ALEXANDER; GILLETTE, ANDREW; BAJAJ, CHANDRAJIT

2013-01-01

We introduce a finite element construction for use on the class of convex, planar polygons and show it obtains a quadratic error convergence estimate. On a convex n-gon, our construction produces 2n basis functions, associated in a Lagrange-like fashion to each vertex and each edge midpoint, by transforming and combining a set of n(n + 1)/2 basis functions known to obtain quadratic convergence. The technique broadens the scope of the so-called ‘serendipity’ elements, previously studied only for quadrilateral and regular hexahedral meshes, by employing the theory of generalized barycentric coordinates. Uniform a priori error estimates are established over the class of convex quadrilaterals with bounded aspect ratio as well as over the class of convex planar polygons satisfying additional shape regularity conditions to exclude large interior angles and short edges. Numerical evidence is provided on a trapezoidal quadrilateral mesh, previously not amenable to serendipity constructions, and applications to adaptive meshing are discussed. PMID:25301974

Punched belt hole position deviation analysis of float type water level gauge

NASA Astrophysics Data System (ADS)

Mao, Chunlei; Wang, Tao; Fu, Weijie; Li, Lianhui

2018-03-01

The key parts of the float type water level gauge instrument is perforated belt, The size and tolerance requirements of its aperture is: (1) alternation of 100+0.2 and 100-0.2, (2) 200±0.1, (3) 1000±0.15, (4) 10000±0.2. The single hole position: alternation of 100+0.2 and 100-0.2; double: 200±0.1, and ensure the best hole position error avoidance tends to be one-way, that is to say: when the punched belt combined with a water wheel rotating line moving, The hole position error to single direction increase or decrease, caused the water level nail gradually and close to the edge of the hole, and then edge and final punched belt was lifted. This paper uses the laser drilling process of steel strip for data collection and analysis. It is found that this method cannot meet the tolerance requirements and the double stamping processing method with adjustable cylindrical pin is feasible.

The spectral basis of optimal error field correction on DIII-D

DOE PAGES

Paz-Soldan, Carlos A.; Buttery, Richard J.; Garofalo, Andrea M.; ...

2014-04-28

Here, experimental optimum error field correction (EFC) currents found in a wide breadth of dedicated experiments on DIII-D are shown to be consistent with the currents required to null the poloidal harmonics of the vacuum field which drive the kink mode near the plasma edge. This allows the identification of empirical metrics which predict optimal EFC currents with accuracy comparable to that of first- principles modeling which includes the ideal plasma response. While further metric refinements are desirable, this work suggests optimal EFC currents can be effectively fed-forward based purely on knowledge of the vacuum error field and basic equilibriummore » properties which are routinely calculated in real-time.« less

Application of Parallel Adjoint-Based Error Estimation and Anisotropic Grid Adaptation for Three-Dimensional Aerospace Configurations

NASA Technical Reports Server (NTRS)

Lee-Rausch, E. M.; Park, M. A.; Jones, W. T.; Hammond, D. P.; Nielsen, E. J.

2005-01-01

This paper demonstrates the extension of error estimation and adaptation methods to parallel computations enabling larger, more realistic aerospace applications and the quantification of discretization errors for complex 3-D solutions. Results were shown for an inviscid sonic-boom prediction about a double-cone configuration and a wing/body segmented leading edge (SLE) configuration where the output function of the adjoint was pressure integrated over a part of the cylinder in the near field. After multiple cycles of error estimation and surface/field adaptation, a significant improvement in the inviscid solution for the sonic boom signature of the double cone was observed. Although the double-cone adaptation was initiated from a very coarse mesh, the near-field pressure signature from the final adapted mesh compared very well with the wind-tunnel data which illustrates that the adjoint-based error estimation and adaptation process requires no a priori refinement of the mesh. Similarly, the near-field pressure signature for the SLE wing/body sonic boom configuration showed a significant improvement from the initial coarse mesh to the final adapted mesh in comparison with the wind tunnel results. Error estimation and field adaptation results were also presented for the viscous transonic drag prediction of the DLR-F6 wing/body configuration, and results were compared to a series of globally refined meshes. Two of these globally refined meshes were used as a starting point for the error estimation and field-adaptation process where the output function for the adjoint was the total drag. The field-adapted results showed an improvement in the prediction of the drag in comparison with the finest globally refined mesh and a reduction in the estimate of the remaining drag error. The adjoint-based adaptation parameter showed a need for increased resolution in the surface of the wing/body as well as a need for wake resolution downstream of the fuselage and wing trailing edge in order to achieve the requested drag tolerance. Although further adaptation was required to meet the requested tolerance, no further cycles were computed in order to avoid large discrepancies between the surface mesh spacing and the refined field spacing.

Economic analysis of the TAX 317 trial: docetaxel versus best supportive care as second-line therapy of advanced non-small-cell lung cancer.

PubMed

Leighl, Natasha B; Shepherd, Frances A; Kwong, Rita; Burkes, Ronald L; Feld, Ronald; Goodwin, Pamela J

2002-03-01

To determine the cost-effectiveness (CE) of second-line docetaxel compared with best supportive care (BSC) in the TAX 317 trial, a randomized clinical trial of second-line chemotherapy in non-small-cell lung cancer. A retrospective CE analysis of the TAX 317 trial was undertaken, evaluating direct medical costs of therapy from the viewpoint of Canada's public health care system. Costs were derived in 1999 Canadian dollars, and resource use was determined through prospective trial data. The incremental survival benefit in the docetaxel arm over BSC was 2 months (P =.047). The CE of docetaxel was $57,749 per year of life gained. For patients treated with docetaxel 75 mg/m(2), the CE was $31,776 per year of life gained. In univariate sensitivity analyses, CE estimates were most sensitive to changes in survival, ranging from $18,374 to $117,434 with 20% variation in survival at the recommended dose. The largest cost center in both arms was hospitalization, followed by the cost of drugs, investigations, radiotherapy, and community care. BSC patients had fewer hospitalizations than patients in the chemotherapy arm and were more often palliated at home. Although the decision to treat should not be based on economic considerations alone, our CE estimate of $31,776 per year of life gained (at the currently recommended dose of docetaxel) is within an acceptable range of health care expenditures, and the total costs of therapy are similar to those of second-line palliative chemotherapy for other solid tumors.

Obsidian provenance determination by using the beam stability controlled BSC-XRF and the PIXE-alpha portable spectrometers of the LANDIS laboratory of the LNS-INFN and IBAM-CNR in Catania (Italy)

NASA Astrophysics Data System (ADS)

Pappalardo, L.; Bracchitta, D.; Palio, O.; Pappalardo, G.; Rizzo, F.

2012-04-01

About 1300 obsidian artefacts coming from various archaeological sites of Sicily were analyzed by using the BSC-XRF (Beam Stability Controlled - X-ray Fluorescence) and PIXE-alpha (Particle Induced X-ray Emission, using low energy alpha particles) portable spectrometers developed at the Landis laboratory at the LNS-INF and IBAM-CNR in Catania (Italy). The portable BSC-XRF system allows the non-destructive analysis of the Rb, Sr, Y, Zr and Nb trace concentrations, which are considered to be characteristic of the obsidian samples and consequently are indicative of the provenance quarries. Quantitative data on Rb, Sr, Y, Zr, Nb trace element concentrations where deduced through the use of a method that makes use of a multi parameter linear regression, previously The portable PIXE-alpha spectrometer allows the quantitative determination of the matrix major elements, from Na to Zn. In the present work the two instrumental devices are presented. The data are from: Milena (Cl), Ustica (Pa), Rocchicella (Ct), Poggio dell'Acquila (Ct), San Marco (Ct), Villaggio del Petraro* (Sr) and Licodia Eubea* (Ct). Results on compositional data for trace elements and major elements allowed to identify Lipari and Pantelleria islands as the only two sources of the analysed samples. Analyses carried out on vitreous artefact found in Rocchicella, showed for the first time that the Palagonite was used as row material. *Preliminary data. Topic of conference: Application of XRS in archaeometry Kind of presentation: oral

Prevention and control of blood stream infection using the balanced scorecard approach.

PubMed

Rohsiswatmo, Rinawati; Rafika, Sarah; Marsubrin, Putri M T

2014-07-01

to obtain formulation of an effective and efficient strategy to overcome blood stream infection (BSI). operational research design with qualitative and quantitative approach. The study was divided into two stages. Stage I was an operational research with problem solving approach using qualitative and quantitative method. Stage II was performed using quantitative method, a form of an interventional study on strategy implementation, which was previously established in stage I. The effective and efficient strategy for the prevention and control of infection in neonatal unit Cipto Mangunkusumo (CM) Hospital was established using Balanced Scorecard (BSC) approach, which involved several related processes. the BSC strategy was proven to be effective and efficient in substantially reducing BSI from 52.31°/oo to 1.36°/oo in neonates with birth weight (BW) 1000-1499 g (p=0.025), and from 29.96°/oo to 1.66°/oo in BW 1500-1999 g (p=0.05). Gram-negative bacteria still predominated as the main cause of BSI in CMH Neonatal Unit. So far, the sources of the microorganisms were thought to be from the environment of treatment unit (tap water filter and humidifying water in the incubator). Significant reduction was also found in neonatal mortality rate weighing 1000-1499 g at birth, length of stay, hospitalization costs, and improved customer satisfaction. effective and efficient infection prevention and control using BSC approach could significantly reduce the rate of BSI. This approach may be applied for adult patients in intensive care unit with a wide range of adjustment.

Time until diagnosis of clinical events with different remote monitoring systems in Implantable Cardioverter-Defibrillator patients.

PubMed

Söth-Hansen, Malene; Witt, Christoffer Tobias; Rasmussen, Mathis; Kristensen, Jens; Gerdes, Christian; Nielsen, Jens Cosedis

2018-05-24

Remote monitoring (RM) is an established technology integrated into routine follow-up of patients with implantable cardioverter-defibrillator (ICD). Current RM systems differ according to transmission frequency and alert definition. We aimed to compare time difference between detection and acknowledgement of clinically relevant events between four RM systems. We analyzed time delay between detection of ventricular arrhythmic and technical events by the ICD and acknowledgement by hospital staff in 1.802 consecutive patients followed with RM during September 2014 - August 2016. Devices from Biotronik (BIO, n=374), Boston Scientific (BSC, n=196), Medtronic (MDT, n=468) and St Jude Medical (SJM, n=764) were included. We identified all events from RM webpages and their acknowledgement with RM or at in-clinic follow-up. Events occurring during weekends were excluded. We included 3.472 events. Proportion of events acknowledged within 24 hours was 72%, 23%, 18% and 65% with BIO, BSC, MDT and SJM, respectively, with median times of 13, 222, 163 and 18 hours from detection to acknowledgement (p<0.001 for both comparisons between manufacturers). Including only events transmitted as alerts by RM, 72%, 68%, 61% and 65% for BIO, BSC, MDT and SJM, respectively were acknowledged within 24 hours. Variation in time to acknowledgement of ventricular tachyarrhythmia episodes not treated with shock therapy was the primary cause for the difference between manufacturers. Significant and clinically relevant differences in time delay from event detection to acknowledgement exist between RM systems. Varying definitions of which events RM transmits as alerts are important for the differences observed. Copyright © 2018. Published by Elsevier Inc.

The End of the Line: Can Ferredoxin and Ferredoxin NADP(H) Oxidoreductase Determine the Fate of Photosynthetic Electrons?

PubMed Central

Goss, Tatjana; Hanke, Guy

2014-01-01

At the end of the linear photosynthetic electron transfer (PET) chain, the small soluble protein ferredoxin (Fd) transfers electrons to Fd:NADP(H) oxidoreductase (FNR), which can then reduce NADP+ to support C assimilation. In addition to this linear electron flow (LEF), Fd is also thought to mediate electron flow back to the membrane complexes by different cyclic electron flow (CEF) pathways: either antimycin A sensitive, NAD(P)H complex dependent, or through FNR located at the cytochrome b6f complex. Both Fd and FNR are present in higher plant genomes as multiple gene copies, and it is now known that specific Fd iso-proteins can promote CEF. In addition, FNR iso-proteins vary in their ability to dynamically interact with thylakoid membrane complexes, and it has been suggested that this may also play a role in CEF. We will highlight work on the different Fd-isoproteins and FNR-membrane association found in the bundle sheath (BSC) and mesophyll (MC) cell chloroplasts of the C4 plant maize. These two cell types perform predominantly CEF and LEF, and the properties and activities of Fd and FNR in the BSC and MC are therefore specialized for CEF and LEF respectively. A diversity of Fd isoproteins and dynamic FNR location has also been recorded in C3 plants, algae and cyanobacteria. This indicates that the principles learned from the extreme electron transport situations in the BSC and MC of maize might be usefully applied to understanding the dynamic transition between these states in other systems. PMID:24678667

Estimation for aerial detection effectiveness with cooperation efficiency factors of early-warning aircraft in early-warning detection SoS under BSC framework

NASA Astrophysics Data System (ADS)

Zhu, Feng; Hu, Xiaofeng; He, Xiaoyuan; Guo, Rui; Li, Kaiming; Yang, Lu

2017-11-01

In the military field, the performance evaluation of early-warning aircraft deployment or construction is always an important problem needing to be explored. As an effective approach of enterprise management and performance evaluation, Balanced Score Card (BSC) attracts more and more attentions and is studied more and more widely all over the world. It can also bring feasible ideas and technical approaches for studying the issue of the performance evaluation of the deployment or construction of early-warning aircraft which is the important component in early-warning detection system of systems (SoS). Therefore, the deep explored researches are carried out based on the previously research works. On the basis of the characteristics of space exploration and aerial detection effectiveness of early-warning detection SoS and the cardinal principle of BSC are analyzed simply, and the performance evaluation framework of the deployment or construction of early-warning aircraft is given, under this framework, aimed at the evaluation issue of aerial detection effectiveness of early-warning detection SoS with the cooperation efficiency factors of the early-warning aircraft and other land based radars, the evaluation indexes are further designed and the relative evaluation model is further established, especially the evaluation radar chart being also drawn to obtain the evaluation results from a direct sight angle. Finally, some practical computer simulations are launched to prove the validity and feasibility of the research thinking and technologic approaches which are proposed in the paper.

Measurement of large steel plates based on linear scan structured light scanning

NASA Astrophysics Data System (ADS)

Xiao, Zhitao; Li, Yaru; Lei, Geng; Xi, Jiangtao

2018-01-01

A measuring method based on linear structured light scanning is proposed to achieve the accurate measurement of the complex internal shape of large steel plates. Firstly, by using a calibration plate with round marks, an improved line scanning calibration method is designed. The internal and external parameters of camera are determined through the calibration method. Secondly, the images of steel plates are acquired by line scan camera. Then the Canny edge detection method is used to extract approximate contours of the steel plate images, the Gauss fitting algorithm is used to extract the sub-pixel edges of the steel plate contours. Thirdly, for the problem of inaccurate restoration of contour size, by measuring the distance between adjacent points in the grid of known dimensions, the horizontal and vertical error curves of the images are obtained. Finally, these horizontal and vertical error curves can be used to correct the contours of steel plates, and then combined with the calibration parameters of internal and external, the size of these contours can be calculated. The experiments results demonstrate that the proposed method can achieve the error of 1 mm/m in 1.2m×2.6m field of view, which has satisfied the demands of industrial measurement.

Fast and fully automatic phalanx segmentation using a grayscale-histogram morphology algorithm

NASA Astrophysics Data System (ADS)

Hsieh, Chi-Wen; Liu, Tzu-Chiang; Jong, Tai-Lang; Chen, Chih-Yen; Tiu, Chui-Mei; Chan, Din-Yuen

2011-08-01

Bone age assessment is a common radiological examination used in pediatrics to diagnose the discrepancy between the skeletal and chronological age of a child; therefore, it is beneficial to develop a computer-based bone age assessment to help junior pediatricians estimate bone age easily. Unfortunately, the phalanx on radiograms is not easily separated from the background and soft tissue. Therefore, we proposed a new method, called the grayscale-histogram morphology algorithm, to segment the phalanges fast and precisely. The algorithm includes three parts: a tri-stage sieve algorithm used to eliminate the background of hand radiograms, a centroid-edge dual scanning algorithm to frame the phalanx region, and finally a segmentation algorithm based on disk traverse-subtraction filter to segment the phalanx. Moreover, two more segmentation methods: adaptive two-mean and adaptive two-mean clustering were performed, and their results were compared with the segmentation algorithm based on disk traverse-subtraction filter using five indices comprising misclassification error, relative foreground area error, modified Hausdorff distances, edge mismatch, and region nonuniformity. In addition, the CPU time of the three segmentation methods was discussed. The result showed that our method had a better performance than the other two methods. Furthermore, satisfactory segmentation results were obtained with a low standard error.

Quality detection system and method of micro-accessory based on microscopic vision

NASA Astrophysics Data System (ADS)

Li, Dongjie; Wang, Shiwei; Fu, Yu

2017-10-01

Considering that the traditional manual detection of micro-accessory has some problems, such as heavy workload, low efficiency and large artificial error, a kind of quality inspection system of micro-accessory has been designed. Micro-vision technology has been used to inspect quality, which optimizes the structure of the detection system. The stepper motor is used to drive the rotating micro-platform to transfer quarantine device and the microscopic vision system is applied to get graphic information of micro-accessory. The methods of image processing and pattern matching, the variable scale Sobel differential edge detection algorithm and the improved Zernike moments sub-pixel edge detection algorithm are combined in the system in order to achieve a more detailed and accurate edge of the defect detection. The grade at the edge of the complex signal can be achieved accurately by extracting through the proposed system, and then it can distinguish the qualified products and unqualified products with high precision recognition.

Hazardous Waste Cleanup: Tecumseh Redevelopment Incorporated in Lackawanna, New York

EPA Pesticide Factsheets

Tecumseh Redevelopment Inc. (Tecumseh) owns approximately 1,100 acres of property located along NYS Route 5, adjacent to Lake Erie, in Lackawanna. The property comprises a significant portion of the former Bethlehem Steel Corporation’s (BSC) Lackawanna

76 FR 7217 - Board of Scientific Counselors, National Center for Injury Prevention and Control (BSC, NCIPC)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-09

..., scientific institutions, and scientists in the conduct of research, investigations, experiments, demonstrations, and studies relating to the causes, diagnosis, treatment, control, and prevention of physical and... well-being; and [[Page 7218

Keeping Score for Organizational Performance.

ERIC Educational Resources Information Center

Prewitt, Vana

2001-01-01

Discussion of the balanced scorecard (BSC) as a performance management tool focuses on common mistakes and problems with implementing it. Topics include the need for intraorganizational communication and collaboration; strategic thinking; organizational goals; purposes of measurements; individual accountability; and setting priorities. (LRW)

The effect of cooperative learning on the attitudes toward science and the achievement of students in a non-science majors' general biology laboratory course at an urban community college

NASA Astrophysics Data System (ADS)

Chung-Schickler, Genevieve C.

The purpose of this study was to evaluate the effect of cooperative learning strategies on students' attitudes toward science and achievement in BSC 1005L, a non-science majors' general biology laboratory course at an urban community college. Data were gathered on the participants' attitudes toward science and cognitive biology level pre and post treatment in BSC 1005L. Elements of the Learning Together model developed by Johnson and Johnson and the Student Team-Achievement Divisions model created by Slavin were incorporated into the experimental sections of BSC 1005L. Four sections of BSC 1005L participated in this study. Participants were enrolled in the 1998 spring (January) term. Students met weekly in a two hour laboratory session. The treatment was administered to the experimental group over a ten week period. A quasi-experimental pretest-posttest control group design was used. Students in the cooperative learning group (nsb1 = 27) were administered the Test of Science-Related Attitudes (TOSRA) and the cognitive biology test at the same time as the control group (nsb2 = 19) (at the beginning and end of the term). Statistical analyses confirmed that both groups were equivalent regarding ethnicity, gender, college grade point average and number of absences. Independent sample t-tests performed on pretest mean scores indicated no significant differences in the TOSRA scale two or biology knowledge between the cooperative learning group and the control group. The scores of TOSRA scales: one, three, four, five, six, and seven were significantly lower in the cooperative learning group. Independent sample t-tests of the mean score differences did not show any significant differences in posttest attitudes toward science or biology knowledge between the two groups. Paired t-tests did not indicate any significant differences on the TOSRA or biology knowledge within the cooperative learning group. Paired t-tests did show significant differences within the control group on TOSRA scale two and biology knowledge. ANCOVAs did not indicate any significant differences on the post mean scores of the TOSRA or biology knowledge adjusted by differences in the pretest mean scores. Analysis of the research data did not show any significant correlation between attitudes toward science and biology knowledge.

Results of sub-analysis of a phase 2 study on trabectedin treatment for extraskeletal myxoid chondrosarcoma and mesenchymal chondrosarcoma.

PubMed

Morioka, Hideo; Takahashi, Shunji; Araki, Nobuhito; Sugiura, Hideshi; Ueda, Takafumi; Takahashi, Mitsuru; Yonemoto, Tsukasa; Hiraga, Hiroaki; Hiruma, Toru; Kunisada, Toshiyuki; Matsumine, Akihiko; Susa, Michiro; Nakayama, Robert; Nishimoto, Kazumasa; Kikuta, Kazutaka; Horiuchi, Keisuke; Kawai, Akira

2016-07-14

Trabectedin is reported to be particularly effective against translocation-related sarcoma. Recently, a randomized phase 2 study in patients with translocation-related sarcomas unresponsive or intolerable to standard chemotherapy was conducted, which showed clinical benefit of trabectedin compared with best supportive care (BSC). Extraskeletal myxoid chondrosarcoma (EMCS) and Mesenchymal chondrosarcoma (MCS) are very rare malignant soft tissue sarcomas, and are associated with translocations resulting in fusion genes. In addition, the previous in vivo data showed that trabectedin affect tumor necrosis and reduction in vascularization in a xenograft model of a human high-grade chondrosarcoma. The aim of the present analysis was to clarify the efficacy of trabectedin for EMCS and MCS subjects in the randomized phase 2 study. Five subjects with EMCS and MCS received trabectedin treatment in the randomized phase 2 study. Three MCS subjects were allocated to the BSC group. Objective response and progression-free survival (PFS) were assessed according to the Response Evaluation Criteria in Solid Tumors (RECIST) version 1.1 by central radiology imaging review. The median follow-up time of the randomized phase 2 study was 22.7 months, and one subject with MCS was still receiving trabectedin treatment at the final data cutoff. The median PFS was 12.5 months (95 % CI: 7.4-not reached) in the trabectedin group, while 1.0 months (95 % CI: 0.3-1.0 months) in MCS subjects of the BSC group. The six-month progression-free rate was 100 % in the trabectedin group. One subject with MCS showed partial response, and the others in the trabectedin group showed stable disease. Overall survival of EMCS and MCS subjects was 26.4 months (range, 10.4-26.4 months) in the trabectedin group. At the final data cutoff, two of five subjects were still alive. This sub-analysis shows that trabectedin is effective for patients with EMCS and MCS compared with BSC. The efficacy results were better than previously reported data of TRS. These facts suggest that trabectedin become an important choice of treatment for patients with advanced EMCS or MCS who failed or were intolerable to standard chemotherapy. The randomized phase 2 study is registered with the Japan Pharmaceutical Information Center, number JapicCTI-121850 (May 31, 2012).

Validation of energy-weighted algorithm for radiation portal monitor using plastic scintillator.

PubMed

Lee, Hyun Cheol; Shin, Wook-Geun; Park, Hyo Jun; Yoo, Do Hyun; Choi, Chang-Il; Park, Chang-Su; Kim, Hong-Suk; Min, Chul Hee

2016-01-01

To prevent illicit tracking of radionuclides, radiation portal monitor (RPM) systems employing plastic scintillators have been used in ports and airports. However, their poor energy resolution makes the discrimination of radioactive material inaccurate. In this study, an energy weight algorithm was validated to determine (133)Ba, (22)Na, (137)Cs, and (60)Co by using a plastic scintillator. The Compton edges of energy spectra were converted to peaks based on the algorithm. The peaks have a maximum error of 6% towards the theoretical Compton edge. Copyright © 2015 Elsevier Ltd. All rights reserved.

Internal standards in fluorescent X-ray spectroscopy1 1 Publication authorized by the Director, U.S. Geological Survey.

USGS Publications Warehouse

Adler, I.; Axelrod, J.M.

1955-01-01

The use of internal standards in the analysis of ores and minerals of widely-varying matrix by means of fluorescent X-ray spectroscopy is frequently the most practical approach. Internal standards correct for absorption and enhancement effects except when an absorption edge falls between the comparison lines or a very strong emission line falls between the absorption edges responsible for the comparison lines. Particle size variations may introduce substantial errors. One method of coping with the particle size problem is grinding the sample with an added abrasive. ?? 1955.

Intelligent identification of remnant ridge edges in region west of Yongxing Island, South China Sea

NASA Astrophysics Data System (ADS)

Wang, Weiwei; Guo, Jing; Cai, Guanqiang; Wang, Dawei

2018-02-01

Edge detection enables identification of geomorphologic unit boundaries and thus assists with geomorphical mapping. In this paper, an intelligent edge identification method is proposed and image processing techniques are applied to multi-beam bathymetry data. To accomplish this, a color image is generated by the bathymetry, and a weighted method is used to convert the color image to a gray image. As the quality of the image has a significant influence on edge detection, different filter methods are applied to the gray image for de-noising. The peak signal-to-noise ratio and mean square error are calculated to evaluate which filter method is most appropriate for depth image filtering and the edge is subsequently detected using an image binarization method. Traditional image binarization methods cannot manage the complicated uneven seafloor, and therefore a binarization method is proposed that is based on the difference between image pixel values; the appropriate threshold for image binarization is estimated according to the probability distribution of pixel value differences between two adjacent pixels in horizontal and vertical directions, respectively. Finally, an eight-neighborhood frame is adopted to thin the binary image, connect the intermittent edge, and implement contour extraction. Experimental results show that the method described here can recognize the main boundaries of geomorphologic units. In addition, the proposed automatic edge identification method avoids use of subjective judgment, and reduces time and labor costs.

Clinical effectiveness and cost-effectiveness of beta-interferon and glatiramer acetate for treating multiple sclerosis: systematic review and economic evaluation.

PubMed

Melendez-Torres, G J; Auguste, Peter; Armoiry, Xavier; Maheswaran, Hendramoorthy; Court, Rachel; Madan, Jason; Kan, Alan; Lin, Stephanie; Counsell, Carl; Patterson, Jacoby; Rodrigues, Jeremy; Ciccarelli, Olga; Fraser, Hannah; Clarke, Aileen

2017-09-01

At the time of publication of the most recent National Institute for Health and Care Excellence (NICE) guidance [technology appraisal (TA) 32] in 2002 on beta-interferon (IFN-β) and glatiramer acetate (GA) for multiple sclerosis, there was insufficient evidence of their clinical effectiveness and cost-effectiveness. To undertake (1) systematic reviews of the clinical effectiveness and cost-effectiveness of IFN-β and GA in relapsing-remitting multiple sclerosis (RRMS), secondary progressive multiple sclerosis (SPMS) and clinically isolated syndrome (CIS) compared with best supportive care (BSC) and each other, investigating annualised relapse rate (ARR) and time to disability progression confirmed at 3 months and 6 months and (2) cost-effectiveness assessments of disease-modifying therapies (DMTs) for CIS and RRMS compared with BSC and each other. Searches were undertaken in January and February 2016 in databases including The Cochrane Library, MEDLINE and the Science Citation Index. We limited some database searches to specific start dates based on previous, relevant systematic reviews. Two reviewers screened titles and abstracts with recourse to a third when needed. The Cochrane tool and the Consolidated Health Economic Evaluation Reporting Standards (CHEERS) and Philips checklists were used for appraisal. Narrative synthesis and, when possible, random-effects meta-analysis and network meta-analysis (NMA) were performed. Cost-effectiveness analysis used published literature, findings from the Department of Health's risk-sharing scheme (RSS) and expert opinion. A de novo economic model was built for CIS. The base case used updated RSS data, a NHS and Personal Social Services perspective, a 50-year time horizon, 2014/15 prices and a discount rate of 3.5%. Outcomes are reported as incremental cost-effectiveness ratios (ICERs). We undertook probabilistic sensitivity analysis. In total, 6420 publications were identified, of which 63 relating to 35 randomised controlled trials (RCTs) were included. In total, 86% had a high risk of bias. There was very little difference between drugs in reducing moderate or severe relapse rates in RRMS. All were beneficial compared with BSC, giving a pooled rate ratio of 0.65 [95% confidence interval (CI) 0.56 to 0.76] for ARR and a hazard ratio of 0.70 (95% CI, 0.55 to 0.87) for time to disability progression confirmed at 3 months. NMA suggested that 20 mg of GA given subcutaneously had the highest probability of being the best at reducing ARR. Three separate cost-effectiveness searches identified > 2500 publications, with 26 included studies informing the narrative synthesis and model inputs. In the base case using a modified RSS the mean incremental cost was £31,900 for pooled DMTs compared with BSC and the mean incremental quality-adjusted life-years (QALYs) were 0.943, giving an ICER of £33,800 per QALY gained for people with RRMS. In probabilistic sensitivity analysis the ICER was £34,000 per QALY gained. In sensitivity analysis, using the assessment group inputs gave an ICER of £12,800 per QALY gained for pooled DMTs compared with BSC. Pegylated IFN-β-1 (125 µg) was the most cost-effective option of the individual DMTs compared with BSC (ICER £7000 per QALY gained); GA (20 mg) was the most cost-effective treatment for CIS (ICER £16,500 per QALY gained). Although we built a de novo model for CIS that incorporated evidence from our systematic review of clinical effectiveness, our findings relied on a population diagnosed with CIS before implementation of the revised 2010 McDonald criteria. DMTs were clinically effective for RRMS and CIS but cost-effective only for CIS. Both RCT evidence and RSS data are at high risk of bias. Research priorities include comparative studies with longer follow-up and systematic review and meta-synthesis of qualitative studies. This study is registered as PROSPERO CRD42016043278. The National Institute for Health Research Health Technology Assessment programme.

Optical Assessment of Soft Contact Lens Edge-Thickness.

PubMed

Tankam, Patrice; Won, Jungeun; Canavesi, Cristina; Cox, Ian; Rolland, Jannick P

2016-08-01

To assess the edge shape of soft contact lenses using Gabor-Domain Optical Coherence Microscopy (GD-OCM) with a 2-μm imaging resolution in three dimensions and to generate edge-thickness profiles at different distances from the edge tip of soft contact lenses. A high-speed custom-designed GD-OCM system was used to produce 3D images of the edge of an experimental soft contact lens (Bausch + Lomb, Rochester, NY) in four different configurations: in air, submerged into water, submerged into saline with contrast agent, and placed onto the cornea of a porcine eyeball. An algorithm to compute the edge-thickness was developed and applied to cross-sectional images. The proposed algorithm includes the accurate detection of the interfaces between the lens and the environment, and the correction of the refraction error. The sharply defined edge tip of a soft contact lens was visualized in 3D. Results showed precise thickness measurement of the contact lens edge profile. Fifty cross-sectional image frames for each configuration were used to test the robustness of the algorithm in evaluating the edge-thickness at any distance from the edge tip. The precision of the measurements was less than 0.2 μm. The results confirmed the ability of GD-OCM to provide high-definition images of soft contact lens edges. As a nondestructive, precise, and fast metrology tool for soft contact lens measurement, the integration of GD-OCM in the design and manufacturing of contact lenses will be beneficial for further improvement in edge design and quality control. In the clinical perspective, the in vivo evaluation of the lens fitted onto the cornea will advance our understanding of how the edge interacts with the ocular surface. The latter will provide insights into the impact of long-term use of contact lenses on the visual performance.

Optical Assessment of Soft Contact Lens Edge-Thickness

PubMed Central

Tankam, Patrice; Won, Jungeun; Canavesi, Cristina; Cox, Ian; Rolland, Jannick P.

2016-01-01

Purpose To assess the edge shape of soft contact lenses using Gabor-Domain Optical Coherence Microscopy (GD-OCM) with a 2 μm imaging resolution in three dimensions, and to generate edge-thickness profiles at different distances from the edge tip of soft contact lenses. Methods A high-speed custom-designed GD-OCM system was used to produce 3D images of the edge of an experimental soft contact lens (Bausch + Lomb, Rochester NY) in four different configurations: in air, submerged into water, submerged into saline with contrast agent, and placed onto the cornea of a porcine eyeball. An algorithm to compute the edge-thickness was developed and applied to cross-sectional images. The proposed algorithm includes the accurate detection of the interfaces between the lens and the environment, and the correction of the refraction error. Results The sharply defined edge tip of a soft contact lens was visualized in 3D. Results showed precise thickness measurement of the contact lens edge profile. 50 cross-sectional image frames for each configuration were used to test the robustness of the algorithm in evaluating the edge-thickness at any distance from the edge tip. The precision of the measurements was less than 0.2 μm. Conclusions The results confirmed the ability of GD-OCM to provide high definition images of soft contact lens edges. As a non-destructive, precise, and fast metrology tool for soft contact lens measurement, the integration of GD-OCM in the design and manufacturing of contact lenses will be beneficial for further improvement in edge design and quality control. In the clinical perspective, the in-vivo evaluation of the lens fitted onto the cornea will advance our understanding of how the edge interacts with the ocular surface. The latter will provide insights into the impact of long-term use of contact lenses on the visual performance. PMID:27232902

Edge control in a computer controlled optical surfacing process using a heterocercal tool influence function.

PubMed

Hu, Haixiang; Zhang, Xin; Ford, Virginia; Luo, Xiao; Qi, Erhui; Zeng, Xuefeng; Zhang, Xuejun

2016-11-14

Edge effect is regarded as one of the most difficult technical issues in a computer controlled optical surfacing (CCOS) process. Traditional opticians have to even up the consequences of the two following cases. Operating CCOS in a large overhang condition affects the accuracy of material removal, while in a small overhang condition, it achieves a more accurate performance, but leaves a narrow rolled-up edge, which takes time and effort to remove. In order to control the edge residuals in the latter case, we present a new concept of the 'heterocercal' tool influence function (TIF). Generated from compound motion equipment, this type of TIF can 'transfer' the material removal from the inner place to the edge, meanwhile maintaining the high accuracy and efficiency of CCOS. We call it the 'heterocercal' TIF, because of the inspiration from the heterocercal tails of sharks, whose upper lobe provides most of the explosive power. The heterocercal TIF was theoretically analyzed, and physically realized in CCOS facilities. Experimental and simulation results showed good agreement. It enables significant control of the edge effect and convergence of entire surface errors in large tool-to-mirror size-ratio conditions. This improvement will largely help manufacturing efficiency in some extremely large optical system projects, like the tertiary mirror of the Thirty Meter Telescope.

Deconvoluting the Complexity of Bone Metastatic Prostate Cancer via Computational Modeling

DTIC Science & Technology

2016-09-01

Fellowship (2015-2017) Consejo Nacional de Ciencia y Tecnologia (CONACYT) MRes/PhD scholarship (2007- 2011) CERN Teacher Programme scholarship (2007...UDLAP Apoyo a Ciencias BSc scholarship (2000-2005) Awards Society for Mathematical Biology (SMB) Travel Award (2015

78 FR 64505 - Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-29

...: 8:30 a.m.-4:30 p.m. Eastern Time, November 15, 2013. Place: Teleconference. Status: The meeting is... matters, including the: (1) Review of extramural research concepts for funding opportunity announcements...

Introduction to Building Systems Performance: Houses that Work II. Revised February 2005

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2005-03-01

The Building Science Consortium (BSC) design recommendations are based on the hygrothermal regions with reference to the annual rainfall. Local climate must be addressed if it differs significantly from the climate described for a particular design.

Improved imaging algorithm for bridge crack detection

NASA Astrophysics Data System (ADS)

Lu, Jingxiao; Song, Pingli; Han, Kaihong

2012-04-01

This paper present an improved imaging algorithm for bridge crack detection, through optimizing the eight-direction Sobel edge detection operator, making the positioning of edge points more accurate than without the optimization, and effectively reducing the false edges information, so as to facilitate follow-up treatment. In calculating the crack geometry characteristics, we use the method of extracting skeleton on single crack length. In order to calculate crack area, we construct the template of area by making logical bitwise AND operation of the crack image. After experiment, the results show errors of the crack detection method and actual manual measurement are within an acceptable range, meet the needs of engineering applications. This algorithm is high-speed and effective for automated crack measurement, it can provide more valid data for proper planning and appropriate performance of the maintenance and rehabilitation processes of bridge.

A simple approach to detect and correct signal faults of Hall position sensors for brushless DC motors at steady speed

NASA Astrophysics Data System (ADS)

Shi, Yongli; Wu, Zhong; Zhi, Kangyi; Xiong, Jun

2018-03-01

In order to realize reliable commutation of brushless DC motors (BLDCMs), a simple approach is proposed to detect and correct signal faults of Hall position sensors in this paper. First, the time instant of the next jumping edge for Hall signals is predicted by using prior information of pulse intervals in the last electrical period. Considering the possible errors between the predicted instant and the real one, a confidence interval is set by using the predicted value and a suitable tolerance for the next pulse edge. According to the relationship between the real pulse edge and the confidence interval, Hall signals can be judged and the signal faults can be corrected. Experimental results of a BLDCM at steady speed demonstrate the effectiveness of the approach.

Finite Element Analysis of Free-Edge Delamination in Laminated Composite Specimens

DTIC Science & Technology

1991-06-18

for the degree of Doctor of Philosophy at the Ohio State University. Revision by H. R. Chu corrected some errors and added further studies on...Galerkin’s approach, in which interlaminar stresses and displacements of each layer satisfying geometrica ’ boundary conditions were represented as -series

Summarisation of weighted networks

NASA Astrophysics Data System (ADS)

Zhou, Fang; Qu, Qiang; Toivonen, Hannu

2017-09-01

Networks often contain implicit structure. We introduce novel problems and methods that look for structure in networks, by grouping nodes into supernodes and edges to superedges, and then make this structure visible to the user in a smaller generalised network. This task of finding generalisations of nodes and edges is formulated as 'network Summarisation'. We propose models and algorithms for networks that have weights on edges, on nodes or on both, and study three new variants of the network summarisation problem. In edge-based weighted network summarisation, the summarised network should preserve edge weights as well as possible. A wider class of settings is considered in path-based weighted network summarisation, where the resulting summarised network should preserve longer range connectivities between nodes. Node-based weighted network summarisation in turn allows weights also on nodes and summarisation aims to preserve more information related to high weight nodes. We study theoretical properties of these problems and show them to be NP-hard. We propose a range of heuristic generalisation algorithms with different trade-offs between complexity and quality of the result. Comprehensive experiments on real data show that weighted networks can be summarised efficiently with relatively little error.

Effect of n = 3 perturbation field amplitudes below the ELM triggering threshold on edge and SOL transport in NSTX

DOE PAGES

J. M. Canik; Lore, J. D.; Ahn, J. -W.; ...

2013-01-12

Here, the pulsed application of n = 3 magnetic perturbation fields with amplitudes below that which triggers ELMs results in distinct, transient responses observable on several edge and divertor diagnostics in NSTX. We refer to these responses as Sub-Threshold Edge Perturbations (STEPs). An analysis of edge measurements suggests that STEPs result in increased transport in the plasma edge and scrape-off layer, which leads to augmentation of the intrinsic strike point splitting due to error fields, i.e., an intensification of the helical divertor footprint flux pattern. These effects are much smaller in magnitude than those of triggered ELMs, and are observedmore » for the duration of the field perturbation measured internal to the vacuum vessel. In addition, STEPs are correlated with changes to the MHD activity, along with transient reductions in the neutron production rate. Ideally the STEPs could be used to provide density control and prevent impurity accumulation, in the same manner that on-demand ELM triggering is used on NSTX, without the impulsive divertor fluxes and potential for damage to plasma facing components associated with ELMs.« less

Dedication to Professor Hazel Prichard BSc, PhD, MBA (1954-2017)

NASA Astrophysics Data System (ADS)

Hall, Ian; Maier, Wolfgang; Barnes, Stephen J.

2017-11-01

The final section of this special issue of GCA on highly siderophile elements is dedicated to Professor Hazel Prichard (see Fig. 1) who sadly passed away in Cardiff on 1st January, 2017, after a brave battle with cancer.

[Therapy with arginine chlorohydrate in children with short constitutional stature].

PubMed

Pittari, A M; Becherucci, P; La Cauza, F; Seminara, S

1993-01-01

It is common knowledge that the administration by mouth of chlorhydrate arginine in children with BSC is followed by an increase of plasma levels of Growth Hormone and Insulin as well as an improvement of statural growth. In order to confirm or disprove this observation we have administrated chlorhydrate arginine for six months in children affected by BSC. We have treated 20 prepubertal children (14 males, 6 females) affected by BSC (13 constitutional growth delay, and 7 familiar short stature) with chronological age ranged from 4.75 to 12.55 years, and bone age from 3 to 12 years, with height < 10 degrees centile. The chlorhydrate arginine was administered by mouth at a daily dosage of 4 g (1 phial/2) for 6 months. Height was controlled 6 months before treatment ("off" period) at the start, and after 6 months of treatment ("on" period). Before the start of treatment GH release was assessed with 3 pharmacological tests (arginine, insulin and clonidine) at last of treatment has been made only arginine test in order to investigate GH and insulin response. We have compared the "off" with "on" period and we have observed a substantial improvement (p < 0.01) of the height velocity (HC), worded in SDS-HC (standard deviation score of height velocity) that changed from -1.21 +/- 0.40 to -0.30 +/- 1.37 with a positive difference of +0.91 +/- 0.47 between the two periods. As for as GH release is concerned we have observed, after therapy, a significant increase of mean almost twice that see in the "off" period and the difference is significant p = 0.012).(ABSTRACT TRUNCATED AT 250 WORDS)

Repeated intermittent ulipristal acetate in the treatment of uterine fibroids: a cost-effectiveness analysis.

PubMed

Geale, Kirk; Saridogan, Ertan; Lehmann, Matthieu; Arriagada, Pablo; Hultberg, Marcus; Henriksson, Martin

2017-01-01

There are limited treatment options available for women with moderate to severe symptoms of uterine fibroids (UFs) who wish to avoid surgery. For these women, treatment with standard pharmaceuticals such as contraceptives is often insufficient to relieve symptoms, and patients may require surgery despite their wish to avoid it. Clinical trials demonstrate that ulipristal acetate 5 mg (UPA) is an effective treatment for this patient group, but its cost-effectiveness has not been assessed in this population. A decision-analytic model was developed to simulate a cohort of patients in this population under treatment with UPA followed by surgery as needed compared to treatment with iron and non-steroidal anti-inflammatory drug (NSAID) followed by surgery as needed (best supportive care, BSC). The analysis took the perspective of the National Health Service (NHS) in England, UK, and was based on the published UPA clinical trials. Results were calculated for the long-term costs and quality-adjusted life years (QALYs) for each treatment arm and combined into an incremental cost-effectiveness ratio (ICER) as the primary outcome. The impact of parameter uncertainty on the results was assessed using scenario, deterministic, and probabilistic sensitivity analyses. The results show that treating patients with the UPA strategy, instead of the BSC strategy, results in an additional cost of £1,115 and a gain of 0.087 QALYs, resulting in an ICER of £12,850. Given commonly accepted cost-effectiveness thresholds in England, the use of UPA as a repeated, intermittent treatment for women with moderate to severe symptoms of UF wishing to avoid surgery is likely to be a cost-effective intervention when compared to BSC.

Everolimus for Previously Treated Advanced Gastric Cancer: Results of the Randomized, Double-Blind, Phase III GRANITE-1 Study

PubMed Central

Ohtsu, Atsushi; Ajani, Jaffer A.; Bai, Yu-Xian; Bang, Yung-Jue; Chung, Hyun-Cheol; Pan, Hong-Ming; Sahmoud, Tarek; Shen, Lin; Yeh, Kun-Huei; Chin, Keisho; Muro, Kei; Kim, Yeul Hong; Ferry, David; Tebbutt, Niall C.; Al-Batran, Salah-Eddin; Smith, Heind; Costantini, Chiara; Rizvi, Syed; Lebwohl, David; Van Cutsem, Eric

2013-01-01

Purpose The oral mammalian target of rapamycin inhibitor everolimus demonstrated promising efficacy in a phase II study of pretreated advanced gastric cancer. This international, double-blind, phase III study compared everolimus efficacy and safety with that of best supportive care (BSC) in previously treated advanced gastric cancer. Patients and Methods Patients with advanced gastric cancer that progressed after one or two lines of systemic chemotherapy were randomly assigned to everolimus 10 mg/d (assignment schedule: 2:1) or matching placebo, both given with BSC. Randomization was stratified by previous chemotherapy lines (one v two) and region (Asia v rest of the world [ROW]). Treatment continued until disease progression or intolerable toxicity. Primary end point was overall survival (OS). Secondary end points included progression-free survival (PFS), overall response rate, and safety. Results Six hundred fifty-six patients (median age, 62.0 years; 73.6% male) were enrolled. Median OS was 5.4 months with everolimus and 4.3 months with placebo (hazard ratio, 0.90; 95% CI, 0.75 to 1.08; P = .124). Median PFS was 1.7 months and 1.4 months in the everolimus and placebo arms, respectively (hazard ratio, 0.66; 95% CI, 0.56 to 0.78). Common grade 3/4 adverse events included anemia, decreased appetite, and fatigue. The safety profile was similar in patients enrolled in Asia versus ROW. Conclusion Compared with BSC, everolimus did not significantly improve overall survival for advanced gastric cancer that progressed after one or two lines of previous systemic chemotherapy. The safety profile observed for everolimus was consistent with that observed for everolimus in other cancers. PMID:24043745

Association between occupational exposure levels of antineoplastic drugs and work environment in five hospitals in Japan.

PubMed

Yoshida, Jin; Koda, Shigeki; Nishida, Shozo; Yoshida, Toshiaki; Miyajima, Keiko; Kumagai, Shinji

2011-03-01

The aim of the present study was to evaluate the measurement of contamination by antineoplastic drugs for safer handling of such drugs by medical workers. We investigated the relationship between the contamination level of antineoplastic drugs and the conditions of their handling. Air samples and wipe samples were collected from equipment in the preparation rooms of five hospitals (hospitals A-E). These samples were subjected to measurement of the amounts of cyclophosphamide (CPA), fluorouracil (5FU), gemcitabine (GEM), and platinum-containing drugs (Pt). Twenty-four-hour urine samples were collected from the pharmacists who handled or audited, the antineoplastic drugs were analyzed for CPA and Pt. Pt was detected from air samples inside BSC in hospital B. Antineoplastic drugs were detected from wipe samples of the BSC in hospitals A, B, D, and E and of other equipment in the preparation rooms in hospitals A, B, C, and D. Cyclophosphamide and 5FU were detected from wipe samples of the air-conditioner filter in hospital A, and CPA was detected from that in hospital D. Cyclophosphamide was detected from urine samples of workers in hospitals B, D, and E. The contamination level of antineoplastic drugs was suggested to be related with the amount of drugs handled, cleaning methods of the equipment, and the skill level of the technique of maintaining negative pressure inside a vial. In order to reduce the contamination and exposure to antineoplastic drugs in the hospital work environment very close to zero, comprehensive safety precautions, including adequate mixing and cleaning methods was required in addition to BSC and closed system device.

Rapid development of cyanobacterial crust in the field for combating desertification

PubMed Central

Park, Chan-Ho; Li, Xin Rong; Zhao, Yang; Jia, Rong Liang; Hur, Jae-Seoun

2017-01-01

Desertification is currently a major concern, and vast regions have already been devastated in the arid zones of many countries. Combined application of cyanobacteria with soil fixing chemicals is a novel method of restoring desertified areas. Three cyanobacteria, Nostoc sp. Vaucher ex Bornet & Flahault, Phormidium sp. Kützing ex Gomont and Scytonema arcangeli Bornet ex Flahault were isolated and tested in this study. Tacki-SprayTM (TKS7), which consists of bio-polysaccharides and tackifiers, was used as a soil fixing agent. In addition, superabsorbent polymer (SAP) was applied to the soil as a water-holding material and nutrient supplement. Application of cyanobacteria with superabsorbent polymer and TKS7 (CST) remarkably improved macro-aggregate stability against water and erodibility against wind after 12 months of inoculation when compared to the control soil. The mean weight diameter and threshold friction velocity of the CST treated soil were found to be 75% and 88% of those of the approximately 20-year-old natural cyanobacterial crust (N-BSC), respectively, while these values were 68% and 73% of those of the N-BSC soil after a single treatment of cyanobacteria alone (CY). Interestingly, biological activities of CST were similar to those of CY. Total carbohydrate contents, cyanobacterial biomass, microbial biomass, soil respiration, carbon fixation and effective quantum yield of CST treated soil were enhanced by 50–100% of the N-BSC, while those of control soil were negligible. Our results suggest that combined application of cyanobacteria with soil fixing chemicals can rapidly develop cyanobacterial crust formation in the field within 12 months. The physical properties and biological activities of the inoculated cyanobacterial crust were stable during the study period. The novel method presented herein serves as another approach for combating desertification in arid regions. PMID:28644849

Outcomes of cancer therapy administered to treatment-naïve lung cancer patients in the intensive care unit

PubMed Central

Chen, Yen-Fu; Lin, Jou-Wei; Ho, Chao-Chi; Yang, Ching-Yao; Chang, Chia-Hao; Huang, Tao-Min; Chen, Chung-Yu; Chen, Kuan-Yu; Shih, Jin-Yuan; Yu, Chong-Jen

2017-01-01

Objectives: Therapy outcomes for newly diagnosed, critically ill lung cancer patients have seldom been evaluated. This study evaluated therapy outcomes for treatment-naïve lung cancer patients in the intensive care unit (ICU). Materials and Methods: Patients were excluded if they had previously received lung cancer treatment, such as systemic chemotherapy, targeted therapy, radiotherapy, or surgical lung resection before ICU admission. The therapeutic strategies for the treatment-naïve patients were determined while they were in the ICU. The patients' demographic data, clinical outcomes, and treatment-related toxicities were analyzed. Results: Newly diagnosed lung cancer patients (n = 72) who did not receive any anticancer treatment before ICU admission were included. Most patients had locally advanced disease, and 61 (84.7%) required intensive care due to cancer-related events. In the ICU, 24 (33.3%) patients received chemotherapy, 24 (33.3%) received epidermal growth factor receptor-tyrosine kinase inhibitor (EGFR-TKI) therapy and 24 (33.3%) received best supportive care (BSC). Patients receiving chemotherapy or EGFR-TKIs in the ICU demonstrated better ICU (p = 0.011) and in-hospital (p = 0.034) survival than those receiving BSC only. Among patients requiring mechanical ventilation, those receiving chemotherapy had higher weaning rates than those receiving EGFR-TKIs or BSC (p = 0.002). In multivariate analysis, receipt of chemotherapy (hazard ratio [HR], 0.443; p = 0.083) and mechanical ventilation (HR, 0.270; p = 0.022) were significantly associated with longer ICU survival after adjusting for clinical factors. Conclusions: Anticancer therapy in the ICU might provide better short-term ICU survival for treatment-naïve, critically ill lung cancer patients. PMID:28819399

Outcomes of cancer therapy administered to treatment-naïve lung cancer patients in the intensive care unit.

PubMed

Chen, Yen-Fu; Lin, Jou-Wei; Ho, Chao-Chi; Yang, Ching-Yao; Chang, Chia-Hao; Huang, Tao-Min; Chen, Chung-Yu; Chen, Kuan-Yu; Shih, Jin-Yuan; Yu, Chong-Jen

2017-01-01

Objectives: Therapy outcomes for newly diagnosed, critically ill lung cancer patients have seldom been evaluated. This study evaluated therapy outcomes for treatment-naïve lung cancer patients in the intensive care unit (ICU). Materials and Methods: Patients were excluded if they had previously received lung cancer treatment, such as systemic chemotherapy, targeted therapy, radiotherapy, or surgical lung resection before ICU admission. The therapeutic strategies for the treatment-naïve patients were determined while they were in the ICU. The patients' demographic data, clinical outcomes, and treatment-related toxicities were analyzed. Results: Newly diagnosed lung cancer patients (n = 72) who did not receive any anticancer treatment before ICU admission were included. Most patients had locally advanced disease, and 61 (84.7%) required intensive care due to cancer-related events. In the ICU, 24 (33.3%) patients received chemotherapy, 24 (33.3%) received epidermal growth factor receptor-tyrosine kinase inhibitor (EGFR-TKI) therapy and 24 (33.3%) received best supportive care (BSC). Patients receiving chemotherapy or EGFR-TKIs in the ICU demonstrated better ICU (p = 0.011) and in-hospital (p = 0.034) survival than those receiving BSC only. Among patients requiring mechanical ventilation, those receiving chemotherapy had higher weaning rates than those receiving EGFR-TKIs or BSC (p = 0.002). In multivariate analysis, receipt of chemotherapy (hazard ratio [HR], 0.443; p = 0.083) and mechanical ventilation (HR, 0.270; p = 0.022) were significantly associated with longer ICU survival after adjusting for clinical factors. Conclusions: Anticancer therapy in the ICU might provide better short-term ICU survival for treatment-naïve, critically ill lung cancer patients.

Warming reduces the growth and diversity of biological soil crusts in a semi-arid environment: implications for ecosystem structure and functioning

PubMed Central

Escolar, Cristina; Martínez, Isabel; Bowker, Matthew A.; Maestre, Fernando T.

2012-01-01

Biological soil crusts (BSCs) are key biotic components of dryland ecosystems worldwide that control many functional processes, including carbon and nitrogen cycling, soil stabilization and infiltration. Regardless of their ecological importance and prevalence in drylands, very few studies have explicitly evaluated how climate change will affect the structure and composition of BSCs, and the functioning of their constituents. Using a manipulative experiment conducted over 3 years in a semi-arid site from central Spain, we evaluated how the composition, structure and performance of lichen-dominated BSCs respond to a 2.4°C increase in temperature, and to an approximately 30 per cent reduction of total annual rainfall. In areas with well-developed BSCs, warming promoted a significant decrease in the richness and diversity of the whole BSC community. This was accompanied by important compositional changes, as the cover of lichens suffered a substantial decrease with warming (from 70 to 40% on average), while that of mosses increased slightly (from 0.3 to 7% on average). The physiological performance of the BSC community, evaluated using chlorophyll fluorescence, increased with warming during the first year of the experiment, but did not respond to rainfall reduction. Our results indicate that ongoing climate change will strongly affect the diversity and composition of BSC communities, as well as their recovery after disturbances. The expected changes in richness and composition under warming could reduce or even reverse the positive effects of BSCs on important soil processes. Thus, these changes are likely to promote an overall reduction in ecosystem processes that sustain and control nutrient cycling, soil stabilization and water dynamics. PMID:23045707

Rapid development of cyanobacterial crust in the field for combating desertification.

PubMed

Park, Chan-Ho; Li, Xin Rong; Zhao, Yang; Jia, Rong Liang; Hur, Jae-Seoun

2017-01-01

Desertification is currently a major concern, and vast regions have already been devastated in the arid zones of many countries. Combined application of cyanobacteria with soil fixing chemicals is a novel method of restoring desertified areas. Three cyanobacteria, Nostoc sp. Vaucher ex Bornet & Flahault, Phormidium sp. Kützing ex Gomont and Scytonema arcangeli Bornet ex Flahault were isolated and tested in this study. Tacki-SprayTM (TKS7), which consists of bio-polysaccharides and tackifiers, was used as a soil fixing agent. In addition, superabsorbent polymer (SAP) was applied to the soil as a water-holding material and nutrient supplement. Application of cyanobacteria with superabsorbent polymer and TKS7 (CST) remarkably improved macro-aggregate stability against water and erodibility against wind after 12 months of inoculation when compared to the control soil. The mean weight diameter and threshold friction velocity of the CST treated soil were found to be 75% and 88% of those of the approximately 20-year-old natural cyanobacterial crust (N-BSC), respectively, while these values were 68% and 73% of those of the N-BSC soil after a single treatment of cyanobacteria alone (CY). Interestingly, biological activities of CST were similar to those of CY. Total carbohydrate contents, cyanobacterial biomass, microbial biomass, soil respiration, carbon fixation and effective quantum yield of CST treated soil were enhanced by 50-100% of the N-BSC, while those of control soil were negligible. Our results suggest that combined application of cyanobacteria with soil fixing chemicals can rapidly develop cyanobacterial crust formation in the field within 12 months. The physical properties and biological activities of the inoculated cyanobacterial crust were stable during the study period. The novel method presented herein serves as another approach for combating desertification in arid regions.

Research on systematization and advancement of shipbuilding production management for flexible and agile response for high value offshore platform

NASA Astrophysics Data System (ADS)

Song, Young-Joo; Woo, Jong-Hun; Shin, Jong-Gye

2011-09-01

Recently, the speed of change related with enterprise management is getting faster than ever owing to the competition among companies, technique diffusion, shortening of product lifecycle, excessive supply of market. For the example, the compliance condition (such as delivery date, product quality, etc.) from the ship owner is getting complicated and the needs for the new product such as FPSO, FSRU are coming to fore. This paradigm shift emphasize the rapid response rather than the competitive price, flexibility and agility rather than effective and optimal perspective for the domestic shipbuilding company. So, domestic shipbuilding companies have to secure agile and flexible ship production environment that could respond change of market and requirements of customers in order to continue a competitive edge in the world market. In this paper, I'm going to define a standard shipbuilding production management system by investigating the environment of domestic major shipbuilding companies. Also, I'm going to propose a unified ship production management and system for the operation of unified management through detail analysis of the activities and the data flow of ship production management. And, the system functions for the strategic approach of ship production management are investigated through the business administration tools such as performance pyramid, VDT and BSC. Lastly, the research of applying strategic KPI to the digital shipyard as virtual execution platform is conducted.

Seasonal to interannual Arctic sea ice predictability in current global climate models

NASA Astrophysics Data System (ADS)

Tietsche, S.; Day, J. J.; Guemas, V.; Hurlin, W. J.; Keeley, S. P. E.; Matei, D.; Msadek, R.; Collins, M.; Hawkins, E.

2014-02-01

We establish the first intermodel comparison of seasonal to interannual predictability of present-day Arctic climate by performing coordinated sets of idealized ensemble predictions with four state-of-the-art global climate models. For Arctic sea ice extent and volume, there is potential predictive skill for lead times of up to 3 years, and potential prediction errors have similar growth rates and magnitudes across the models. Spatial patterns of potential prediction errors differ substantially between the models, but some features are robust. Sea ice concentration errors are largest in the marginal ice zone, and in winter they are almost zero away from the ice edge. Sea ice thickness errors are amplified along the coasts of the Arctic Ocean, an effect that is dominated by sea ice advection. These results give an upper bound on the ability of current global climate models to predict important aspects of Arctic climate.

Edge detection for optical synthetic aperture based on deep neural network

NASA Astrophysics Data System (ADS)

Tan, Wenjie; Hui, Mei; Liu, Ming; Kong, Lingqin; Dong, Liquan; Zhao, Yuejin

2017-09-01

Synthetic aperture optics systems can meet the demands of the next-generation space telescopes being lighter, larger and foldable. However, the boundaries of segmented aperture systems are much more complex than that of the whole aperture. More edge regions mean more imaging edge pixels, which are often mixed and discretized. In order to achieve high-resolution imaging, it is necessary to identify the gaps between the sub-apertures and the edges of the projected fringes. In this work, we introduced the algorithm of Deep Neural Network into the edge detection of optical synthetic aperture imaging. According to the detection needs, we constructed image sets by experiments and simulations. Based on MatConvNet, a toolbox of MATLAB, we ran the neural network, trained it on training image set and tested its performance on validation set. The training was stopped when the test error on validation set stopped declining. As an input image is given, each intra-neighbor area around the pixel is taken into the network, and scanned pixel by pixel with the trained multi-hidden layers. The network outputs make a judgment on whether the center of the input block is on edge of fringes. We experimented with various pre-processing and post-processing techniques to reveal their influence on edge detection performance. Compared with the traditional algorithms or their improvements, our method makes decision on a much larger intra-neighbor, and is more global and comprehensive. Experiments on more than 2,000 images are also given to prove that our method outperforms classical algorithms in optical images-based edge detection.

On a direct connection of the transition metal impurity levels to the band edge discontinuities in semiconductor heterojunctions

NASA Astrophysics Data System (ADS)

Langer, Jerzy M.; Heinrich, Helmut

1985-11-01

Our recent proposal of using the transition metal impurity levels to predict the isovalent heterojunction (HJ) band-edge discontinuities is further discussed. It is shown that for Ga 1-xAl xAs/GaAs heterojunctions most of the recent discontinuity data follow within experimental error the prediction of the ΔE cb: ΔE vb= 0.64:0.36 discontinuity ratio derived from the Fe 2+ level position in Ga 1-xAl xAs compound. Predictions of valence-band discontinuities for the other III-V and II-VI HJ systems are also given.

Solving local structure around dopants in metal nanoparticles with ab initio modeling of X-ray absorption near edge structure

DOE PAGES

Timoshenko, J.; Shivhare, A.; Scott, R. W.; ...

2016-06-30

We adopted ab-initio X-ray Absorption Near Edge Structure (XANES) modelling for structural refinement of local environments around metal impurities in a large variety of materials. Our method enables both direct modelling, where the candidate structures are known, and the inverse modelling, where the unknown structural motifs are deciphered from the experimental spectra. We present also estimates of systematic errors, and their influence on the stability and accuracy of the obtained results. We illustrate our approach by following the evolution of local environment of palladium atoms in palladium-doped gold thiolate clusters upon chemical and thermal treatments.

78 FR 72892 - Findings of Research Misconduct

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-04

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Office of the Secretary Findings of Research Misconduct... Research Integrity (ORI) has taken final action in the following case: Timothy Sheehy, B.A., BSc., SAIC-Frederick, Inc. FOR FURTHER INFORMATION CONTACT: David E. Wright, Ph.D., Director, Office of Research...

Goal orientation and its relationship to academic success in a laptop-based BScN program.

PubMed

Goldsworthy, Sandra J; Goodman, Bill; Muirhead, Bill

2005-01-01

This longitudinal study, conducted within a laptop-based BScN program examines the relationship of goal orientation profiles to comfort with technology and academic success. In phase 1 of this study, 101 first year nursing students completed an on line survey. The measurement tools used were Goal Orientation Assessment, Multiple Intelligences Learning Inventory and a locally developed Technology Comfort survey. Results showed that students were predominantly high in the mastery goal orientation profile. Males had a higher comfort level with technology. Age was inversely related to comfort with technology. An unexpected finding was that grade point average was inversely related to comfort with use of technology. The data did not support the commonly held belief that today's students are uniformly well-skilled and comfortable with new technologies. This study will continue over the next three years and will allow comparison of variables over time. Specific teaching interventions may be developed to accommodate varying learning and motivational styles in relation to comfort with technology.

pyRMSD: a Python package for efficient pairwise RMSD matrix calculation and handling.

PubMed

Gil, Víctor A; Guallar, Víctor

2013-09-15

We introduce pyRMSD, an open source standalone Python package that aims at offering an integrative and efficient way of performing Root Mean Square Deviation (RMSD)-related calculations of large sets of structures. It is specially tuned to do fast collective RMSD calculations, as pairwise RMSD matrices, implementing up to three well-known superposition algorithms. pyRMSD provides its own symmetric distance matrix class that, besides the fact that it can be used as a regular matrix, helps to save memory and increases memory access speed. This last feature can dramatically improve the overall performance of any Python algorithm using it. In addition, its extensibility, testing suites and documentation make it a good choice to those in need of a workbench for developing or testing new algorithms. The source code (under MIT license), installer, test suites and benchmarks can be found at https://pele.bsc.es/ under the tools section. victor.guallar@bsc.es Supplementary data are available at Bioinformatics online.

Factors affecting the career path choices of graduates at the Western College of Veterinary Medicine

PubMed Central

Jelinski, Murray D.; Campbell, John R.; Naylor, Jonathan M.; Lawson, Karen L.; Derkzen, Dena

2008-01-01

The objective of this study was to describe the demographics of the Class of 2006, Western College of Veterinary Medicine, and to determine which factors influenced the graduates’ career path choices. Data were collected via an on-line survey and the response rate was 95.7% (67/70). The majority (57%) of graduates were starting their veterinary career in a food animal-related (FAR) job. Two factors were significantly associated with this choice: 1) those raised in, or near, a small center (population < 10 000) were 3.4 times (P = 0.03) more likely to accept a FAR position than were those raised in a large center (> 10 000), and 2) graduates with a bachelor of science in agriculture (BSc Ag) were 4.5 times (P = 0.04) more likely to begin their career as a FAR practitioner than were those without such a degree. However, 9 of the 16 graduates having a BSc Ag had an urban upbringing. PMID:18309746

'Conversion course' to allow holders of the IMI Diploma in Medical Illustration to gain a BSc in Medical Illustration from Glasgow Caledonian University.

PubMed

Herd, A Y; Milligan, R G

1997-09-01

The 'conversion course' described in this paper has been set up following discussions between the Institute of Medical Illustrators (IMI) and Glasgow Caledonian University (GCU). The 'conversion course' will take the form of a degree triple module with a credit rating of 60 Scottish Credit and Accumulation Transfer (SCOTCAT) credits at Scottish Degree (SD) level 3. This module will require the student to undertake an extended theoretical based investigative project. The project will permit the student to study in-depth an aspect of his/her specialist interest that has a particular professional relevance. The topic of the project will be negotiated between the student and a scrutiny panel under the aegis of the department of Biological Sciences at Glasgow Caledonian University. The project will be written up in the style of an academic paper for the Institute's journal. Successful students will be awarded the BSc in Medical Illustration.

A BSc level option in biomedical electronics.

PubMed

Gergely, S

1979-01-01

1. The application of electronic instruments in medical diagnosis and therapy is well established. 2. There is a demand for electronic engineers both in industry and in the Health Service at all ranges of educational attainment. 3. It is possible to identify a set of objectives for a first degree course in Biomedical Electronics. An important element of this course should be the provision of practical experience in industry and in hospitals. 4. Such courses are available both in Europe and in the United States. Although the postgraduate course provision was satisfactory in the UK in the early seventies, only one full time undergraduate course was in operation. 5. A sandwich course can be designed in Biomedical Electronics as a major option of an existing BSc course in Electrical and Electronic Engineering. Provision can be made for entering and leaving the option. The option can be arranged to follow the guidelines laid down by the IEE for exemption from its educational requirements. 6. The option described started at the Lanchester Polytechnic in Coventry in September 1977.

Backscatter and attenuation properties of mammalian brain tissues

NASA Astrophysics Data System (ADS)

Wijekularatne, Pushpani Vihara

Traumatic Brain Injury (TBI) is a common category of brain injuries, which contributes to a substantial number of deaths and permanent disability all over the world. Ultrasound technology plays a major role in tissue characterization due to its low cost and portability that could be used to bridge a wide gap in the TBI diagnostic process. This research addresses the ultrasonic properties of mammalian brain tissues focusing on backscatter and attenuation. Orientation dependence and spatial averaging of data were analyzed using the same method resulting from insertion of tissue sample between a transducer and a reference reflector. Apparent backscatter transfer function (ABTF) at 1 to 10 MHz, attenuation coefficient and backscatter coefficient (BSC) at 1 to 5 MHz frequency ranges were measured on ovine brain tissue samples. The resulting ABTF was a monotonically decreasing function of frequency and the attenuation coefficient and BSC generally were increasing functions of frequency, results consistent with other soft tissues such as liver, blood and heart.

Chiral Luttinger liquids and a generalized Luttinger's theorem in fractional quantum Hall edges via finite-entanglement scaling

NASA Astrophysics Data System (ADS)

Varjas, Daniel; Zaletel, Michael; Moore, Joel

2014-03-01

We use bosonic field theories and the infinite system density matrix renormalization group (iDMRG) method to study infinite strips of fractional quantum Hall (FQH) states starting from microscopic Hamiltonians. Finite-entanglement scaling allows us to accurately measure chiral central charge, edge mode exponents and momenta without finite-size errors. We analyze states in the first and second level of the standard hierarchy and compare our results to predictions of the chiral Luttinger liquid (χLL) theory. The results confirm the universality of scaling exponents in chiral edges and demonstrate that renormalization is subject to universal relations in the non-chiral case. We prove a generalized Luttinger's theorem involving all singularities in the momentum-resolved density, which naturally arises when mapping Landau levels on a cylinder to a fermion chain and deepens our understanding of non-Fermi liquids in 1D.

Chiral Luttinger liquids and a generalized Luttinger theorem in fractional quantum Hall edges via finite-entanglement scaling

NASA Astrophysics Data System (ADS)

Varjas, Dániel; Zaletel, Michael P.; Moore, Joel E.

2013-10-01

We use bosonic field theories and the infinite system density matrix renormalization group method to study infinite strips of fractional quantum Hall states starting from microscopic Hamiltonians. Finite-entanglement scaling allows us to accurately measure chiral central charge, edge-mode exponents, and momenta without finite-size errors. We analyze states in the first and second levels of the standard hierarchy and compare our results to predictions of the chiral Luttinger liquid theory. The results confirm the universality of scaling exponents in chiral edges and demonstrate that renormalization is subject to universal relations in the nonchiral case. We prove a generalized Luttinger theorem involving all singularities in the momentum-resolved density, which naturally arises when mapping Landau levels on a cylinder to a fermion chain and deepens our understanding of non-Fermi liquids in one dimension.

Joint detection of anatomical points on surface meshes and color images for visual registration of 3D dental models

NASA Astrophysics Data System (ADS)

Destrez, Raphaël.; Albouy-Kissi, Benjamin; Treuillet, Sylvie; Lucas, Yves

2015-04-01

Computer aided planning for orthodontic treatment requires knowing occlusion of separately scanned dental casts. A visual guided registration is conducted starting by extracting corresponding features in both photographs and 3D scans. To achieve this, dental neck and occlusion surface are firstly extracted by image segmentation and 3D curvature analysis. Then, an iterative registration process is conducted during which feature positions are refined, guided by previously found anatomic edges. The occlusal edge image detection is improved by an original algorithm which follows Canny's poorly detected edges using a priori knowledge of tooth shapes. Finally, the influence of feature extraction and position optimization is evaluated in terms of the quality of the induced registration. Best combination of feature detection and optimization leads to a positioning average error of 1.10 mm and 2.03°.

SRAO: optical design and the dual-knife-edge WFS

NASA Astrophysics Data System (ADS)

Ziegler, Carl; Law, Nicholas M.; Tokovinin, Andrei

2016-07-01

The Southern Robotic Adaptive Optics (SRAO) instrument will bring the proven high-efficiency capabilities of Robo-AO to the Southern-Hemisphere, providing the unique capability to image with high-angular-resolution thousands of targets per year across the entire sky. Deployed on the modern 4.1m SOAR telescope located on Cerro Tololo, the NGS AO system will use an innovative dual-knife-edge wavefront sensor, similar to a pyramid sensor, to enable guiding on targets down to V=16 with diffraction limited resolution in the NIR. The dual-knife-edge wavefront sensor can be up to two orders of magnitude less costly than custom glass pyramids, with similar wavefront error sensitivity and minimal chromatic aberrations. SRAO is capable of observing hundreds of targets a night through automation, allowing confirmation and characterization of the large number of exoplanets produced by current and future missions.

Eliminating the Blame Game

ERIC Educational Resources Information Center

Swanson, Kristen; Allen, Gayle; Mancabelli, Rob

2015-01-01

Even mentioning data analysis puts many educators on edge; they fear that in data discussions, their performance will be judged. And, the authors note, it's a human trait to look for the source of a problem in the behavior of people involved rather than the system surrounding those people--what some call the Fundamental Attribution Error. When…

Multipath analysis diffraction calculations

NASA Technical Reports Server (NTRS)

Statham, Richard B.

1996-01-01

This report describes extensions of the Kirchhoff diffraction equation to higher edge terms and discusses their suitability to model diffraction multipath effects of a small satellite structure. When receiving signals, at a satellite, from the Global Positioning System (GPS), reflected signals from the satellite structure result in multipath errors in the determination of the satellite position. Multipath error can be caused by diffraction of the reflected signals and a method of calculating this diffraction is required when using a facet model of the satellite. Several aspects of the Kirchhoff equation are discussed and numerical examples, in the near and far fields, are shown. The vector form of the extended Kirchhoff equation, by adding the Larmor-Tedone and Kottler edge terms, is given as a mathematical model in an appendix. The Kirchhoff equation was investigated as being easily implemented and of good accuracy in the basic form, especially in phase determination. The basic Kirchhoff can be extended for higher accuracy if desired. A brief discussion of the method of moments and the geometric theory of diffraction is included, but seems to offer no clear advantage in implementation over the Kirchhoff for facet models.

Overview of RWM Stabilization and Other Experiments With New Internal Coils in the DIII-D Tokamak

NASA Astrophysics Data System (ADS)

Jackson, G. L.; Evans, T. E.; La Haye, R. J.; Kellman, A. G.; Schaffer, M. J.; Scoville, J. T.; Strait, E. J.; Szymanski, D. D.; Bialek, J.; Garofalo, A. M.; Navratil, G. A.; Reimerdes, H.; Edgell, D. H.; Okabayashi, M.; Hatcher, R.

2003-10-01

A set of 12 single-turn internal coils (I-coils) has been installed and operated in the DIII-D tokamak. The primary purpose of these coils (A_coil = 1.1 m^2, I ≤,7 kA, d_wall = 1.47 cm) is to improve stabilization of the n=1 resistive wall mode (RWM), compared to the existing external C-coil set, especially for high βN advanced tokamak discharges in low toroidal rotation plasmas. The versatility of the I-coil set and its associated power systems allow for a variety of experiments: fast feedback stabilization of RWMs, dc error field correction, edge stochastic fields, n=1,2, or 3 toroidal magnetic braking, and MHD spectroscopy (0-60 Hz). The resonant field amplification from an applied n=1 field was found to be completely suppressed, demonstrating successfully the controllability with the new system. With the I-coils, the high βN regime (above the no wall limit) has been explored both with RWM feedback and with dynamic error field correction. Experiments on edge ergodization will also be discussed.

An Improved Unsupervised Image Segmentation Evaluation Approach Based on - and Over-Segmentation Aware

NASA Astrophysics Data System (ADS)

Su, Tengfei

2018-04-01

In this paper, an unsupervised evaluation scheme for remote sensing image segmentation is developed. Based on a method called under- and over-segmentation aware (UOA), the new approach is improved by overcoming the defect in the part of estimating over-segmentation error. Two cases of such error-prone defect are listed, and edge strength is employed to devise a solution to this issue. Two subsets of high resolution remote sensing images were used to test the proposed algorithm, and the experimental results indicate its superior performance, which is attributed to its improved OSE detection model.

Study of the L-mode tokamak plasma “shortfall” with local and global nonlinear gyrokinetic δf particle-in-cell simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chowdhury, J.; Wan, Weigang; Chen, Yang

2014-11-15

The δ f particle-in-cell code GEM is used to study the transport “shortfall” problem of gyrokinetic simulations. In local simulations, the GEM results confirm the previously reported simulation results of DIII-D [Holland et al., Phys. Plasmas 16, 052301 (2009)] and Alcator C-Mod [Howard et al., Nucl. Fusion 53, 123011 (2013)] tokamaks with the continuum code GYRO. Namely, for DIII-D the simulations closely predict the ion heat flux at the core, while substantially underpredict transport towards the edge; while for Alcator C-Mod, the simulations show agreement with the experimental values of ion heat flux, at least within the range of experimental error.more » Global simulations are carried out for DIII-D L-mode plasmas to study the effect of edge turbulence on the outer core ion heat transport. The edge turbulence enhances the outer core ion heat transport through turbulence spreading. However, this edge turbulence spreading effect is not enough to explain the transport underprediction.« less

Building Learning Communities: Foundations for Good Practice

ERIC Educational Resources Information Center

Davies, Alison; Ramsay, Jill; Lindfield, Helen; Couperthwaite, John

2005-01-01

The School of Health Sciences at the University of Birmingham provided opportunities for the development of student learning communities and online resources within the neurological module of the BSc Physiotherapy degree programme. These learning communities were designed to facilitate peer and independent learning in core aspects underpinning…

75 FR 53705 - Request for Nominations of Candidates To Serve on the Board of Scientific Counselors (BSC...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-01

... for Environmental Health/ Agency for Toxic Substances and Disease Registry (NCEH/ATSDR), Centers for... human diseases and disabilities caused by environmental conditions. Experts in the disciplines of toxicology, epidemiology, environmental or occupational medicine, behavioral science, risk assessment...

78 FR 65634 - Combined Notice of Filings #2

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings 2 Take notice that the Commission received the following electric corporate filings: Docket Numbers: EC14-13-000. Applicants: Portland General Electric Company, BA Leasing BSC, LLC, Fale-Safe Incorporated. Description: Application of Portland General Electric...

Evolution of Fractal Parameters through Development Stage of Soil Crust

NASA Astrophysics Data System (ADS)

Ospina, Abelardo; Florentino, Adriana; Tarquis, Ana Maria

2016-04-01

Soil surface characteristics are subjected to changes driven by several interactions between water, air, biotic and abiotic components. One of the examples of such interactions is provided through biological soil crusts (BSC) in arid and semi-arid environments. BSC are communities composed of cyanobacteria, fungi, mosses, lichens, algae and liverworts covering the soil surface and play an important role in ecosystem functioning. The characteristics and formation of these BSC influence the soil hydrological balance, control the mass of eroded sediment, increase stability of soil surface, and influence plant productivity through the modification of nitrogen and carbon cycle. The site of this work is located at Quibor and Ojo de Agua (Lara state, Venezuela). The Quibor Depression in Venezuela is a major agricultural area being at semi-arid conditions and limited drainage favor the natural process of salinization. Additionally, the extension and intensification of agriculture has led to over-exploitation of groundwater in the past 30 years (Méndoza et al., 2013). The soil microbial crust develops initially on physical crusts which are mainly generated since wetting and drying, being a recurrent feature in the Quíbor arid zone. The microbiotic crust is organic, composed of macro organisms (bryophytes and lichens) and microorganisms (cyanobacteria, fungi algae, etc.); growing on the ground, forming a thickness no greater than 3 mm. For further details see Toledo and Florentino (2009). This study focus on characterize the development stage of the BSC based on image analysis. To this end, grayscale images of different types of biological soil crust at different stages where taken, each image corresponding to an area of 12.96 cm2 with a resolution of 1024x1024 pixels (Ospina et al., 2015). For each image lacunarity and fractal dimension through the differential box counting method were calculated. These were made with the software ImageJ/Fraclac (Karperien, 2013). REFERENCES Karperien, A. (2013). FracLac for ImageJ. Méndoza, B., Florentino, A., Hernández-Hernández, R.M., Aciego, J., Torres, D. and Vera, Elena. (2013). Biological attributes of two Quibor soils with addition of organic fertilizer and salt solutions. Revista Mexicana de Ciencias Agrícolas, 4(3), 409-421. Ospina, Abelardo, Adriana Florentino and Ana M. Tarquis (2015) Spatial Pattern of Biological Soil Crust with Fractal Geometry. Geophysical Research Abstracts, 17, EGU2015-15415-1 Toledo, V. and Florentino, A. (2009). The Microbiotic Crust On Soil. Revista de Investigación N° 68(33), 199-216.

Soil stabilization by biological soil crusts in arid Tunisia

NASA Astrophysics Data System (ADS)

Guidez, Sabine; Couté, Alain; Bardat, Jacques

2015-04-01

As part of the fight against desertification (LCD) in arid Tunisia, we have been able to highlight the important role played by biological soil crusts (BSC) in soil stabilization. The identification of the major species of cyanobacteria, lichens and bryophytes, their adaptation and terrestrial colonization strategies in this high climatic constraints area through their morpho-anatomical criteria have been set. In addition to their biological composition, their internal arrangement (i.e. texture and microstructure) reflects the structural stability of BSC against erosion. Precisely, the aggregative power of cyanobacteria and their ways of moving inside a soil, the capacity of mosses to grow through the sediments and lichens ability to bind at particles on surface, thus stabilizing the substrate have been demonstrated. Then, the three biological components ability to capture soil particles has been widely illustrated, proving the major environmental contribution of BSC in arid areas biological crusts formation, providing that soils will experience an increase of organic matter and fine particles rates subsequently gaining faster and better stability. Although the thickness and the morphology of crusts are related to the cover rates of these different biological components, the water properties of the latter, studied at the environmental SEM, illustrate their important role in altering the water cycle. Thus, the mixed crusts, i.e. with good presence of three biological components, cause the highest runoff rates by their ability to retain the water and spread on the surface. In spite of a swelling coefficient in presence of water higher than cryptogams, the cyanobacterial crusts located in newly stabilized areas of our studied region, remain finally insufficiently dense to impact surface hydrology. But, we showed after all that the cyanobacteria, pioneer species, have a certain environmental role. The lichen crusts cause a increased runoff because the lichens have a ability to extend them horizontally on the soil surface. Despite the water capture for their metabolism, the water flows; it isn't released in the depth. The moss crusts show an opposite process with an increased infiltration thanks to the possibility of a vertical transit of water through their sheets, stem and roots. So, in relation to bare soils, a crust with a good microbial and cryptogamic development causes more runoff. As part of the fight against the desertification in arid Tunisia, hydrological impact of BSC may lead to elaborate some ecosystem strategies in water and soils management. Indeed, climate aridity is not synonymous with edaphic aridity.

Human factors in safety and business management.

PubMed

Vogt, Joachim; Leonhardt, Jorg; Koper, Birgit; Pennig, Stefan

2010-02-01

Human factors in safety is concerned with all those factors that influence people and their behaviour in safety-critical situations. In aviation these are, for example, environmental factors in the cockpit, organisational factors such as shift work, human characteristics such as ability and motivation of staff. Careful consideration of human factors is necessary to improve health and safety at work by optimising the interaction of humans with their technical and social (team, supervisor) work environment. This provides considerable benefits for business by increasing efficiency and by preventing incidents/accidents. The aim of this paper is to suggest management tools for this purpose. Management tools such as balanced scorecards (BSC) are widespread instruments and also well known in aviation organisations. Only a few aviation organisations utilise management tools for human factors although they are the most important conditions in the safety management systems of aviation organisations. One reason for this is that human factors are difficult to measure and therefore also difficult to manage. Studies in other domains, such as workplace health promotion, indicate that BSC-based tools are useful for human factor management. Their mission is to develop a set of indicators that are sensitive to organisational performance and help identify driving forces as well as bottlenecks. Another tool presented in this paper is the Human Resources Performance Model (HPM). HPM facilitates the integrative assessment of human factors programmes on the basis of a systematic performance analysis of the whole system. Cause-effect relationships between system elements are defined in process models in a first step and validated empirically in a second step. Thus, a specific representation of the performance processes is developed, which ranges from individual behaviour to system performance. HPM is more analytic than BSC-based tools because HPM also asks why a certain factor is facilitating or obstructing success. A significant need for research and development is seen here because human factors are of increasing importance for organisational success. This paper suggests integrating human factors in safety management of aviation businesses - a top-ranking partner of technology and finance - and managing it with professional tools. The tools HPM and BSC were identified as potentially useful for this purpose. They were successfully applied in case studies briefly presented in this paper. In terms of specific safety-steering tools in the aviation industry, further elaboration and empirical study is crucial. Statement of Relevance: The importance of human factors is recognised by operators at the sharp end of aviation, where flights are conducted or coordinated. At the blunt end, measurement tools are needed to manage operational resources.

Multidimensional evaluation of performance: experimental application of the balanced scorecard in Ferrara university hospital.

PubMed

Verzola, Adriano; Bentivegna, Roberto; Carandina, Gianni; Trevisani, Lucio; Gregorio, Pasquale; Mandini, Alberto

2009-09-08

One of the best-known performance planning and evaluation techniques utilising both monetary and non-monetary data is the Balanced Scorecard (BSC). This is a means of rationalising the global activity of a business in the attempt to create value, and to translate the company vision into a set of tactical objectives and measurable strategies. The aim of this study was to implement and evaluate the use of BSC in two departments of the St. Anna University Hospital, Ferrara: the Analysis Laboratory and Digestive Endoscopy operating units (OU). With the collaboration of the health workers involved, a precise methodological programme was pursued: Definition of the strategic map from 4 perspectives, according to Kaplan and Norton, Definition of the Key Performance Areas (KPA), or macro-objectives, Identification of the cause-effect relationships between KPAs, Identification of the sub-objectives of each KPA, Definition of the Key Performance Indicators (KPI), Definition of the weight/importance of each objective in the global evaluation. The information gathered permitted the definition of macro- and sub-objectives for each perspective, as well as determining the relevant indicators, standards, weights, frequency of detection and means of acquisition. Strategic maps showing the cause/effect relationships in each OU were created, as were 'evaluation panels', which describe the global performance of each department. For each perspective, the fundamental data were summarised in one table. Evaluation of each perspective yielded a positive result for the majority of the objectives, and the global result (including all 4 perspectives) was found to be satisfactory. The Balanced Scorecard was implemented in the abovementioned OUs of St. Anna University Hospital, Ferrara, after the health workers themselves realised the need for change.In our research the employees were pleased to be evaluated, not only for the financial outcomes, but also for the satisfaction of improving internal procedure, relationships with the community and their own growth/learning. BSC is an ideal point of contact between the financial and clinical dimensions of management. However, difficulties in its application were faced, among these, at least in the initial phase, the lack of information systems able to drive it, and the complexity of the research for specific indicators needed to be overcome. The time factor (on average, at least two years are required) and the availability of technological resources were also limiting factors.The rapid diffusion of BSC among the principal international profit and non-profit organisations is testament to its great potential. This project could be seen as a preparatory phase in the strategical analysis of a subsequent business plan.

Antenna Design and Foreground Characterization for Improved Detection of the Redshifted 21 cm Global Signature During the Epoch of Reionization

NASA Astrophysics Data System (ADS)

Mozdzen, Thomas J.; Bowman, Judd D.; Monsalve, Raul A.; Rogers, Alan E. E.

2018-01-01

The Experiment to Detect the Global Epoch of Reionization (EoR) Signature (EDGES) is an effort to measure the sky-averaged redshifted 21 cm difference temperature, Tb, with a single wide field-of-view well-calibrated antenna placed in Western Australia. Tb is due to interactions of the hyperfine ground state of HI with the CMB and is four to five orders of magnitude dimmer than the foreground synchrotron radiation whose removal requires very low systematic errors in data collection. I analyzed two different antenna designs, a rectangular blade-shaped antenna and a fourpoint-shaped antenna, by comparing and quantifying the impact of the chromatic nature of the antenna beam directivity. Foreground removal of simulated antenna temperatures, formed by convolving a frequency scaled Haslam 408 MHz sky map with each of the antenna’s chromatic beams, resulted in a factor of 10 lower rms error for the blade antenna when using a five term polynomial for the sky foreground. The signal to noise ratio was at a maximum when five terms were used to represent the sky foreground and was superior for the blade antenna by factors between 1.35 and 1.95. These results led to the conversion of all EDGES antenna designs to the blade design. The spectral index, β, of the sky was measured, using 211 nights of data, to be ‑2.60 > β > ‑2.62 in lower LST regions, increasing to ‑2.50 near the Galactic plane. I compared our measurements with spectral index simulations derived from two published sky maps and found good agreement at the transit of the Galactic Center, but at other LST values tended to overpredict by at most by Δβ < 0.05 for one map and by Δβ < 0.12 for the other. The EDGES instrument is shown to be very stable throughout the observations as the data scatter is very low, σβ < 0.003, and the total systematic uncertainty in β is 0.02. The improved systematic error enhances our ability to detect EoR signatures. I present preliminary results that show an EoR model by Kaurov & Gnedin (2016) is inconsistent with measured EDGES data at a significance of 1.9σ.

Interfacial Effects on the Band Edges of Functionalized Si Surfaces in Liquid Water

DOE PAGES

Pham, Tuan Anh; Lee, Donghwa; Schwegler, Eric; ...

2014-11-17

By combining ab initio molecular dynamics simulations and many-body perturbation theory calculations of electronic energy levels, we determined the band edge positions of functionalized Si(111) surfaces in the presence of liquid water, with respect to vacuum and to water redox potentials. We considered surface terminations commonly used for Si photoelectrodes in water splitting experiments. We found that, when exposed to water, the semiconductor band edges were shifted by approximately 0.5 eV in the case of hydrophobic surfaces, irrespective of the termination. The effect of the liquid on band edge positions of hydrophilic surfaces was much more significant and determined bymore » a complex combination of structural and electronic effects. These include structural rearrangements of the semiconductor surfaces in the presence of water, changes in the orientation of interfacial water molecules with respect to the bulk liquid, and charge transfer at the interfaces, between the solid and the liquid. Our results showed that the use of many-body perturbation theory is key to obtain results in agreement with experiments; they also showed that the use of simple computational schemes that neglect the detailed microscopic structure of the solid–liquid interface may lead to substantial errors in predicting the alignment between the solid band edges and water redox potentials.« less

Edge co-occurrences can account for rapid categorization of natural versus animal images

NASA Astrophysics Data System (ADS)

Perrinet, Laurent U.; Bednar, James A.

2015-06-01

Making a judgment about the semantic category of a visual scene, such as whether it contains an animal, is typically assumed to involve high-level associative brain areas. Previous explanations require progressively analyzing the scene hierarchically at increasing levels of abstraction, from edge extraction to mid-level object recognition and then object categorization. Here we show that the statistics of edge co-occurrences alone are sufficient to perform a rough yet robust (translation, scale, and rotation invariant) scene categorization. We first extracted the edges from images using a scale-space analysis coupled with a sparse coding algorithm. We then computed the “association field” for different categories (natural, man-made, or containing an animal) by computing the statistics of edge co-occurrences. These differed strongly, with animal images having more curved configurations. We show that this geometry alone is sufficient for categorization, and that the pattern of errors made by humans is consistent with this procedure. Because these statistics could be measured as early as the primary visual cortex, the results challenge widely held assumptions about the flow of computations in the visual system. The results also suggest new algorithms for image classification and signal processing that exploit correlations between low-level structure and the underlying semantic category.

The application of wavelet denoising in material discrimination system

NASA Astrophysics Data System (ADS)

Fu, Kenneth; Ranta, Dale; Guest, Clark; Das, Pankaj

2010-01-01

Recently, the need for cargo inspection imaging systems to provide a material discrimination function has become desirable. This is done by scanning the cargo container with x-rays at two different energy levels. The ratio of attenuations of the two energy scans can provide information on the composition of the material. However, with the statistical error from noise, the accuracy of such systems can be low. Because the moving source emits two energies of x-rays alternately, images from the two scans will not be identical. That means edges of objects in the two images are not perfectly aligned. Moreover, digitization creates blurry-edge artifacts. Different energy x-rays produce different edge spread functions. Those combined effects contribute to a source of false classification namely, the "edge effect." Other types of false classification are caused by noise, mainly Poisson noise associated with photons. The Poisson noise in xray images can be dealt with using either a Wiener filter or a wavelet shrinkage denoising approach. In this paper, we propose a method that uses the wavelet shrinkage denoising approach to enhance the performance of the material identification system. Test results show that this wavelet-based approach has improved performance in object detection and eliminating false positives due to the edge effects.

Automated kidney morphology measurements from ultrasound images using texture and edge analysis

NASA Astrophysics Data System (ADS)

Ravishankar, Hariharan; Annangi, Pavan; Washburn, Michael; Lanning, Justin

2016-04-01

In a typical ultrasound scan, a sonographer measures Kidney morphology to assess renal abnormalities. Kidney morphology can also help to discriminate between chronic and acute kidney failure. The caliper placements and volume measurements are often time consuming and an automated solution will help to improve accuracy, repeatability and throughput. In this work, we developed an automated Kidney morphology measurement solution from long axis Ultrasound scans. Automated kidney segmentation is challenging due to wide variability in kidney shape, size, weak contrast of the kidney boundaries and presence of strong edges like diaphragm, fat layers. To address the challenges and be able to accurately localize and detect kidney regions, we present a two-step algorithm that makes use of edge and texture information in combination with anatomical cues. First, we use an edge analysis technique to localize kidney region by matching the edge map with predefined templates. To accurately estimate the kidney morphology, we use textural information in a machine learning algorithm framework using Haar features and Gradient boosting classifier. We have tested the algorithm on 45 unseen cases and the performance against ground truth is measured by computing Dice overlap, % error in major and minor axis of kidney. The algorithm shows successful performance on 80% cases.

75 FR 25870 - Board of Scientific Counselors (BSC), National Center for Environmental Health/Agency for Toxic...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-10

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of... Control and Prevention, 4770 Buford Highway, Chamblee, Georgia 30341. Status: Open to the public, limited..., experiments, demonstrations, and studies relating to the causes, diagnosis, treatment, control, and prevention...

INFLUENCE OF DIETARY ARSENIC ON URINARY ARSENIC METABOLITE EXCRETION

EPA Science Inventory

Influence of Dietary Arsenic on Urinary Arsenic Metabolite Excretion

Cara L. Carty, M.S., Edward E. Hudgens, B.Sc., Rebecca L. Calderon, Ph.D., M.S.P.H., Richard Kwok, M.S.P.H., Epidemiology and Biomarkers Branch/HSD, NHEERL/US EPA; David J. Thomas, Ph.D., Pharmacokinetics...

76 FR 39879 - Request for Nominations of Candidates To Serve on the Board of Scientific Counselors, National...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

... Environmental Health/Agency for Toxic Substances and Disease Registry (BSC, NCEH/ATSDR), Centers for Disease... experience in preventing human diseases and disabilities caused by environmental conditions. Experts in the disciplines of toxicology, epidemiology, environmental or occupational medicine, behavioral science, risk...

Problem Based Learning in Constructed Textile Design

ERIC Educational Resources Information Center

Sayer, Kate; Wilson, Jacquie; Challis, Simon

2006-01-01

Staff observing undergraduate students enrolled on the BSc Hons Textile Design and Design Management programme in The School of Materials, The University of Manchester, identified difficulties with knowledge retention in the area of constructed textile design. Consequently an experimental pilot was carried out in seamless knitwear design using a…

Mobile Learning: A Kaleidoscope

ERIC Educational Resources Information Center

Kruger, Marlena; Bester, Riana

2014-01-01

CTI is an accredited private higher education institution (university) with the Higher Education Council (HEC) in South Africa. Its head office is in Fourways, Johannesburg. CTI has 12 campuses nationwide and offers higher certificates and degrees in commerce and information technology. These BCom and BSc degrees were rolled out to all 12…

Graduate Basis for Registration and Its Place within Psychology

ERIC Educational Resources Information Center

Cartmell, Katherine

2008-01-01

Having just completed a BSc (Hons) Psychology degree, this author feels well placed to offer a student's perspective on John Radford's provocative article, "Psychology in its place". Although Radford discussed a number of relevant areas regarding psychology in higher education, Cartmell aims to discuss one main issue that many psychology…

Performance Evaluation of Extension Education Centers in Universities Based on the Balanced Scorecard

ERIC Educational Resources Information Center

Wu, Hung-Yi; Lin, Yi-Kuei; Chang, Chi-Hsiang

2011-01-01

This study aims at developing a set of appropriate performance evaluation indices mainly based on balanced scorecard (BSC) for extension education centers in universities by utilizing multiple criteria decision making (MCDM). Through literature reviews and experts who have real practical experiences in extension education, adequate performance…

78 FR 40743 - Board of Scientific Counselors, Office of Public Health Preparedness and Response, Board of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-08

... Scientific Counselors, Office of Public Health Preparedness and Response, Board of Scientific Counselors (BSC... Director, Centers for Disease Control and Prevention (CDC), and the Director, Office of Public Health... Public Health Practice Executive Assistant, Centers for Disease Control and Prevention, 1600 Clifton Road...

78 FR 66938 - Board of Scientific Counselors, Office of Public Health Preparedness and Response, Board of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-07

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Office of Public Health Preparedness and Response, Board of Scientific Counselors (BSC.... Contact Person for More Information: Marquita Black, Executive Assistant, Office of Science and Public...

Comprehensive Framework for Evaluating e-Learning Systems: Using BSC Framework

ERIC Educational Resources Information Center

Momeni, Mansor; Jamporazmey, Mona; Mehrafrouz, Mohsen; Bahadori, Fatemeh

2013-01-01

The development of information and communication technology (ICT) is changing the way in which people work, communicate and learn. Recently developing and implementing e-learning solutions have increased dramatically. According to heavily investing in this area, it is essential to evaluate its different aspects and understand measures, which…

77 FR 22326 - Board of Scientific Counselors, National Center for Health Statistics, (BSC, NCHS)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-13

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of...) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and..., and organizational affiliation of the presenter. Written comments should not exceed five single-spaced...

75 FR 17754 - Board of Scientific Counselors, National Center for Health Statistics, (BSC, NCHS)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-07

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of...) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and... name, address, telephone number, and organizational affiliation of the presenter. Written comments...

75 FR 6402 - Board of Scientific Counselors, National Center for Health Marketing (BSC, NCHM)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-09

... and new ideas to implement and expand health marketing science at CDC. Agenda items are subject to... investigations and data collection, analysis, and distribution; conducting operational research aimed at..., goals and organizational structure of the new Office of Communications; discussions on program...

Characterization and remediation of Soil Contaminated with Explosives: Development of Practical Technologies

DTIC Science & Technology

2001-07-06

Chemistry Agnes Renoux, Ph.D. Ecotoxicology Bernard Lachance, Ph. D. Ecotoxicology Ping Gong, Ph. D. Ecotoxicology Pierre-Yves Robidoux, Ph.D... Ecotoxicology Tamara Sheremata, Ph. D. Env. Engineering Diane Fournier, Ph.D. Microbiology Annamaria Halasz, M.Sc. Chemistry Louise Paquet, B.Sc...12 Chapter 4: Applied Ecotoxicology

78 FR 35037 - Request for Nominations of Candidates To Serve on the Board of Scientific Counselors, Office of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-11

...; medicine, epidemiology, laboratory science, informatics, behavioral science, social science, engineering... international public health partners. The BSC ( http://www.cdc.gov/phpr/science/counselors.htm ) provides advice... of Science and Public Health Practice, Office of Preparedness and Emergency Response, Centers for...

76 FR 67192 - Board of Scientific Counselors, National Center for Injury Prevention and Control (BSC, NCIPC)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-31

... health authorities, scientific institutions, and scientists in the conduct of research, investigations, experiments, demonstrations, and studies relating to the causes, diagnosis, treatment, control, and prevention of physical and mental diseases, and other impairments and (2) conduct and assist in research and...

Initiating Events in Prostate Cancer: The Role of Somatic Activation of Beta-Catening

DTIC Science & Technology

2005-04-01

B.Sc. 1978 Medical Biochemistry National Institute for Medical Research, London, U.K. PhD 1982 Genetics/Aging Rene Descartes University. Paris FR D.Sc...Rend Descartes , Paris, France. 1989-1998 Research Group Leader, Division of Tumor Immunology, German Cancer Research Center, Heidelberg, Germany

In memoriam/À la mémoire de

USDA-ARS?s Scientific Manuscript database

Richard (Dick) Stace-Smith (1924 - 2017) was born in Creston, British Columbia. He received his B.Sc. degree in Agriculture from University of British Columbia in 1950 and Ph.D. from Oregon State University in 1954. Dick worked at the Agriculture Canada, later renamed Agriculture and Agri-Food Canad...

College Students' Perceptions of Short Message Service-Supported Collaborative Learning

ERIC Educational Resources Information Center

Zamani-Miandashti, Naser; Ataei, Pouria

2015-01-01

Interaction is a major success factor that affects collaborative learning. This study examined the perceptions of college students about short message service (SMS) supported collaborative learning. Seventy-five BSc students from three classes were asked to cooperate on group assignments. The participants used their mobile phones to exchange text…

78 FR 38983 - World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP-STAC)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP-STAC) Correction: This notice was... and Control, (BSC, NCIPC) and the name of the Committee should read World Trade Center Health Program...

Venetoclax for Treating Chronic Lymphocytic Leukaemia: An Evidence Review Group Perspective of a NICE Single Technology Appraisal.

PubMed

Mistry, Hema; Nduka, Chidozie; Connock, Martin; Colquitt, Jill; Mantopoulos, Theodoros; Loveman, Emma; Walewska, Renata; Mason, James

2018-04-01

Venetoclax is licensed to treat relapsed or refractory (R/R) chronic lymphocytic leukaemia (CLL). As part of the Single Technology Appraisal (STA) ID944, the National Institute for Health and Care Excellence (NICE) invited AbbVie, the manufacturer, to submit evidence on the use of venetoclax, within its licensed indication. The Evidence Review Group (ERG), Warwick Evidence, was asked to provide an independent and critical review of the submitted evidence. Evidence came from three single-arm trials in CLL patients with or without 17p deletion [del(17p])/TP53 chromosomal abnormalities. The anticipated licensed indication specified that venetoclax-eligible del(17p)/TP53 patients should have not responded to, or be deemed unsuitable for, B-cell receptor inhibitor (BCRi) therapy, and that non-del(17p)/TP53 patients should have not responded to both chemoimmunotherapy and BCRi therapy. The three trials were heterogeneous in terms of both del(17p)/TP53 status and previous exposure to BCRi therapy. The M13-982 study investigated 158 R/R CLL patients with the 17p deletion, but only a small number had received previous BCRi therapy; the M12-175 study investigated 67 patients with CLL or small lymphocytic lymphoma, some with the 17p deletion, but very few previously treated with BCRi therapy; and the M14-032 study included 105 patients previously treated with BCRi therapy (either idelalisib or ibrutinib), some of whom had unknown mutation status. The ERG concluded that the study populations did not directly conform to those specified in the licensed indication or in the NICE scope. Outcomes reported included overall response rate (ORR), duration of response, progression-free survival (PFS) and overall survival (OS); adverse events were reported for the pooled population of all three studies, as well as separately for each study. The median PFS was 41.4 and 27.2 months among patients in the M12-175 and M13-982 trials, respectively, whereas the median PFS was not reached in the M14-032 trial. Some results were designated academic in confidence and cannot be reported here. The submission provided a de novo partitioned survival cost-effectiveness model with three health states: pre-progression, post-progression and dead. Transition probabilities between health states were estimated using Weibull models for PFS and OS. The ERG judged the model structure to be appropriate. Venetoclax was compared with best supportive care (BSC) in patients with or without del(17p)/TP53 mutation status, and with palliative care (PC). To populate the del(17p)/TP53 venetoclax arm, the submission pooled del(17p)/TP53 patients from all three studies and fitted Weibull models for PFS and OS. PFS and OS models for non-del(17p)/TP53 venetoclax patients were obtained by applying hazard ratios (HRs) to the del(17p)/TP53 OS and PFS models, derived using Cox's regression analysis comparing del(17p)/TP53 and non-del(17p)/TP53 patients pooled from the M14-032 and M12-175 studies. The ERG expressed reservations about the company's pooling procedure, but acknowledged its expedience given the small evidence base. For the BSC comparator arm, the submission used the rituximab + placebo arm from a randomised controlled trial comparing idelalisib + rituximab versus placebo + rituximab ('study 116'). Weibull regression data for OS and PFS were taken from the idelalisib STA (ID764) submitted by Gilead to NICE. The ERG considered the use of the study 116 rituximab arm to be inconsistent with the licensed indication for venetoclax because these patients had neither not responded to nor were inappropriate for BCRi therapy, being eligible to be randomised to idelalisib. Another difficulty was the requirement for a technical correction in survival analysis because of considerable switching from rituximab to idelalisib. The ERG considered that post-progression survival of patients from the idelalisib arm of study 116 provided a more appropriate representation of BSC since these patients had not responded to BCRi therapy, consistent with venetoclax's licensed indication. For PC, the company submission used data from the UK CLL Forum. The company's base-case analysis indicated that venetoclax was clinically effective, but the resulting incremental cost-effectiveness ratios (ICERs) for del(17p)/TP53 (£39,940/quality-adjusted life-year [QALY] gained) and non-del(17p)/TP53 (£47,370/QALY gained) patients were well above the NICE threshold of £20,000-30,000/QALY. The ERG identified two errors in the implementation of the company's parametric models-one related to the implementation of HRs, and the other to the derivation of the Weibull shape parameters obtained from the Gilead idelalisib submission. The ERG made plausible adjustments to the company's base-case and corrected errors, resulting in a reduced estimate of the cost effectiveness of venetoclax in non-del(17p)/TP53 and del(17p)/TP53 indications; in the ERG's preferred base case, using post-progression survival of patients in the idelalisib arm of study 116 as the BSC comparator, deterministic ICERs were higher than the company's base-case for both indications: £57,476/QALY gained for del(17p)/TP53 and £77,779/QALY gained for non-del(17p)/TP53. The NICE Appraisal Committee's preliminary recommendation was that venetoclax used within its licensed indication should not be recommended for use in the National Health Service (NHS). In response to the preliminary recommendation, the company submitted new analyses; however, at a subsequent appraisal committee meeting, the original recommendation was upheld and the committee concluded there were large uncertainties around the clinical effectiveness of venetoclax and BSC, and that under the committee's preferred assumptions, the ICERs were higher than those generally considered cost effective, even when end-of-life criteria were taken into account. The company submitted further evidence, and the final guidance recommended venetoclax for use with the Cancer Drugs Fund for the two populations in this technology appraisal.

People vs. Collins: Statistics as a Two-Edged Sword

ERIC Educational Resources Information Center

McGivney-Burelle, Jean; McGivney, Katherine; McGivney, Ray

2006-01-01

Real-life applications of the use (and misuse) of mathematics invariably pique students' interest. This article describes a legal case in California that occurred in the 1960s in which a couple was convicted of robbery, in part, based on the expert testimony of a statistics instructor. On appeal, the judge noted several mathematical errors in this…

Bad Apples or Sour Pickles? Fundamental Attribution Error and the Columbine Massacre. The Cutting Edge

ERIC Educational Resources Information Center

Clabaugh, Gary K.; Clabaugh, Alison A.

2005-01-01

A painstaking investigative report by the Washington Post describes pre-massacre Columbine as filled with social vinegar. The high school was dominated by a "cult of the athlete." In this distorted environment, a coterie of favored jocks, who wore white hats to set themselves apart, consistently bullied, hazed, and sexually harassed their…

Azacitidine for Treating Acute Myeloid Leukaemia with More Than 30 % Bone Marrow Blasts: An Evidence Review Group Perspective of a National Institute for Health and Care Excellence Single Technology Appraisal.

PubMed

Tikhonova, Irina A; Hoyle, Martin W; Snowsill, Tristan M; Cooper, Chris; Varley-Campbell, Joanna L; Rudin, Claudius E; Mujica Mota, Ruben E

2017-03-01

The National Institute for Health and Care Excellence (NICE) invited the manufacturer of azacitidine (Celgene) to submit evidence for the clinical and cost effectiveness of this drug for the treatment of acute myeloid leukaemia with more than 30 % bone marrow blasts in adults who are not eligible for haematopoietic stem cell transplantation, as part of the NICE's Single Technology Appraisal process. The Peninsula Technology Assessment Group was commissioned to act as the Evidence Review Group (ERG). The ERG produced a critical review of the evidence contained within the company's submission to NICE. The clinical effectiveness data used in the company's economic analysis were derived from a single randomised controlled trial, AZA-AML-001. It was an international, multicentre, controlled, phase III study with an open-label, parallel-group design conducted to determine the efficacy and safety of azacitidine against a conventional care regimen (CCR). The CCR was a composite comparator of acute myeloid leukaemia treatments currently available in the National Health Service: intensive chemotherapy followed by best supportive care (BSC) upon disease relapse or progression, non-intensive chemotherapy followed by BSC and BSC only. In AZA-AML-001, the primary endpoint was overall survival. Azacitidine appeared to be superior to the CCR, with median overall survival of 10.4 and 6.5 months, respectively. However, in the intention-to-treat analysis, the survival advantage associated with azacitidine was not statistically significant. The company submitted a de novo economic evaluation based on a partitioned survival model with four health states: "Remission", "Non-remission", "Relapse/Progressive disease" and "Death". The model time horizon was 10 years. The perspective was the National Health Service and Personal Social Services. Costs and health effects were discounted at the rate of 3.5 % per year. The base-case incremental cost-effectiveness ratio (ICER) of azacitidine compared with the CCR was £20,648 per quality-adjusted life-year (QALY) gained. In the probabilistic sensitivity analysis, the mean ICER was £17,423 per QALY. At the willingness-to-pay of £20,000, £30,000 and £50,000 per QALY, the probability of azacitidine being cost effective was 0.699, 0.908 and 0.996, respectively. The ERG identified a number of errors in Celgene's model and concluded that the results of the company's economic evaluation could not be considered robust. After amendments to Celgene's model, the base-case ICER was £273,308 per QALY gained. In the probabilistic sensitivity analysis, the mean ICER was £277,123 per QALY. At a willingness-to-pay of £100,000 per QALY, the probability of azacitidine being cost effective was less than 5 %. In all exploratory analyses conducted by the ERG, the ICER exceeded the NICE's cost-effectiveness threshold range of £20,000-30,000 per QALY. Given the evidence provided in the submission, azacitidine did not fulfil NICE's end-of-life criteria. After considering the analyses performed by the ERG and submissions from clinician and patient experts, the NICE Appraisal Committee did not recommend azacitidine for this indication.

Functional renormalization group approach to the Yang-Lee edge singularity

DOE PAGES

An, X.; Mesterházy, D.; Stephanov, M. A.

2016-07-08

Here, we determine the scaling properties of the Yang-Lee edge singularity as described by a one-component scalar field theory with imaginary cubic coupling, using the nonperturbative functional renormalization group in 3 ≤ d ≤ 6 Euclidean dimensions. We find very good agreement with high-temperature series data in d = 3 dimensions and compare our results to recent estimates of critical exponents obtained with the four-loop ϵ = 6 - d expansion and the conformal bootstrap. The relevance of operator insertions at the corresponding fixed point of the RG β functions is discussed and we estimate the error associated with O(∂more » 4) truncations of the scale-dependent effective action.« less

Functional renormalization group approach to the Yang-Lee edge singularity

DOE Office of Scientific and Technical Information (OSTI.GOV)

An, X.; Mesterházy, D.; Stephanov, M. A.

Here, we determine the scaling properties of the Yang-Lee edge singularity as described by a one-component scalar field theory with imaginary cubic coupling, using the nonperturbative functional renormalization group in 3 ≤ d ≤ 6 Euclidean dimensions. We find very good agreement with high-temperature series data in d = 3 dimensions and compare our results to recent estimates of critical exponents obtained with the four-loop ϵ = 6 - d expansion and the conformal bootstrap. The relevance of operator insertions at the corresponding fixed point of the RG β functions is discussed and we estimate the error associated with O(∂more » 4) truncations of the scale-dependent effective action.« less

Low loss jammed-array wideband sawtooth filter based on a finite reflection virtually imaged array

NASA Astrophysics Data System (ADS)

Tan, Zhongwei; Cao, Dandan; Ding, Zhichao

2018-03-01

An edge filter is a potential technology in the fiber Bragg grating interrogation that has the advantages of fast response speed and suitability for dynamic measurement. To build a low loss, wideband jammed-array wideband sawtooth (JAWS) filter, a finite reflection virtually imaged array (FRVIA) is proposed and demonstrated. FRVIA is different from the virtually imaged phased array in that it has a low reflective front end. This change will lead to many differences in the device's performance in output optical intensity distribution, spectral resolution, output aperture, and tolerance of the manufacture errors. A low loss, wideband JAWS filter based on an FRVIA can provide an edge filter for each channel, respectively.

Segmentation via fusion of edge and needle map

NASA Astrophysics Data System (ADS)

Ahn, Hong-Young; Tou, Julius T.

1991-03-01

This paper presents an integrated image segmentation method using edge and needle map which compensates deficiencies of using either edge-based approach or region-based approach. Segmentation of an image is the first and most difficult step toward symbolic transformation of a raw image, which is essential in image understanding. In industrial applications, the task is further complicated by the ubiquitous presence of specularity in most industrial parts. Three images taken from three different illumination directions were used to separate specular and Lambertian components in the images. Needle map is generated from Lambertian component images using photometric stereo technique. In one channel, edges are extracted and linked from the averaged Lambertian images providing one source of segmentation. The other channel, Gaussian curvature and mean curvature values are estimated at each pixel from least square local surface fit of needle map. Labeled surface type image is then generated using the signs of Gaussian and mean curvatures, where one of ten surface types is assigned to each pixel. Connected regions of identical surface type pixels provide the first level grouping, a rough initial segmentation. Edge information and initial segmentation of surface type are fed to an integration module which interprets the edges and regions in a consistent way. During interpretation regions are merged or split, edges are discarded or generated depending upon global surface fit error and consistency with neighboring regions. The output of integrated segmentation is an explicit description of surface type and contours of each region which facilitates recognition, localization and attitude determination of objects in the image.

Exploring the Relationship Between Reflectance Red Edge and Chlorophyll Content in Slash Pine

NASA Technical Reports Server (NTRS)

Curran, Paul J.; Dungan, Jennifer L.; Gholz, Henry L.

1990-01-01

Chlorophyll is a key indicator of the physiological status of a forest canopy. However, its distribution may vary greatly in time and space, so that the estimation of chlorophyll content of canopies or branches by extrapolation from leaf values obtained by destructive sampling is labor intensive and potentially inaccurate. Chlorophy11 content is related positively to the point of maximum slope in vegetation reflectance spectra which occurs at wavelengths between 690-740 nm and is known as the "red edge." The red edge of needles on individual slash pine (Piniis elliottii Engelm.) branches and in whole forest canopies was measured with a spectroradiometer. Branches were measured on the ground against a spectrally flat reflectance target and canopies were measured from observation towers against a spectrally variable understory and forest floor. There was a linear relationship between red edge and chlorophyll content of branches (R(exp 2) = 0.91). Measurements of the red edge and this relationship were used to estimate the chlorophyll content of other branches with an error that was lower than that associated with the colorimetric (laboratory) method. There was no relationship between the red edge and the chlorophyll content of whole canopies. This can be explained by the overriding influence of the understory and forest floor, an influence that was illustrated by spectral mixture modeling. The results suggest that the red edge could be used to estimate the chlorophyll content in branches but it is unlikely to be of value for the estimation of chlorophyll content in canopies unless the canopy cover is high.

Estimation of the two-dimensional presampled modulation transfer function of digital radiography devices using one-dimensional test objects

PubMed Central

Wells, Jered R.; Dobbins, James T.

2012-01-01

Purpose: The modulation transfer function (MTF) of medical imaging devices is commonly reported in the form of orthogonal one-dimensional (1D) measurements made near the vertical and horizontal axes with a slit or edge test device. A more complete description is found by measuring the two-dimensional (2D) MTF. Some 2D test devices have been proposed, but there are some issues associated with their use: (1) they are not generally available; (2) they may require many images; (3) the results may have diminished accuracy; and (4) their implementation may be particularly cumbersome. This current work proposes the application of commonly available 1D test devices for practical and accurate estimation of the 2D presampled MTF of digital imaging systems. Methods: Theory was developed and applied to ensure adequate fine sampling of the system line spread function for 1D test devices at orientations other than approximately vertical and horizontal. Methods were also derived and tested for slit nonuniformity correction at arbitrary angle. Techniques were validated with experimental measurements at ten angles using an edge test object and three angles using a slit test device on an indirect-detection flat-panel system [GE Revolution XQ/i (GE Healthcare, Waukesha, WI)]. The 2D MTF was estimated through a simple surface fit with interpolation based on Delaunay triangulation of the 1D edge-based MTF measurements. Validation by synthesis was also performed with simulated images from a hypothetical direct-detection flat-panel device. Results: The 2D MTF derived from physical measurements yielded an average relative precision error of 0.26% for frequencies below the cutoff (2.5 mm−1) and approximate circular symmetry at frequencies below 4 mm−1. While slit analysis generally agreed with the results of edge analysis, the two showed subtle differences at frequencies above 4 mm−1. Slit measurement near 45° revealed radial asymmetry in the MTF resulting from the square pixel aperture (0.2 mm × 0.2 mm), a characteristic which was not necessarily appreciated with the orthogonal 1D MTF measurements. In simulation experiments, both slit- and edge-based measurements resolved the radial asymmetries in the 2D MTF. The average absolute relative accuracy error in the 2D MTF between the DC and cutoff (2.5 mm−1) frequencies was 0.13% with average relative precision error of 0.11%. Other simulation results were similar to those derived from physical data. Conclusions: Overall, the general availability, acceptance, accuracy, and ease of implementation of 1D test devices for MTF assessment make this a valuable technique for 2D MTF estimation. PMID:23039654

Estimation of the two-dimensional presampled modulation transfer function of digital radiography devices using one-dimensional test objects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wells, Jered R.; Dobbins, James T. III; Carl E. Ravin Advanced Imaging Laboratories, Duke University Medical Center, Durham, North Carolina 27705

2012-10-15

Purpose: The modulation transfer function (MTF) of medical imaging devices is commonly reported in the form of orthogonal one-dimensional (1D) measurements made near the vertical and horizontal axes with a slit or edge test device. A more complete description is found by measuring the two-dimensional (2D) MTF. Some 2D test devices have been proposed, but there are some issues associated with their use: (1) they are not generally available; (2) they may require many images; (3) the results may have diminished accuracy; and (4) their implementation may be particularly cumbersome. This current work proposes the application of commonly available 1Dmore » test devices for practical and accurate estimation of the 2D presampled MTF of digital imaging systems. Methods: Theory was developed and applied to ensure adequate fine sampling of the system line spread function for 1D test devices at orientations other than approximately vertical and horizontal. Methods were also derived and tested for slit nonuniformity correction at arbitrary angle. Techniques were validated with experimental measurements at ten angles using an edge test object and three angles using a slit test device on an indirect-detection flat-panel system [GE Revolution XQ/i (GE Healthcare, Waukesha, WI)]. The 2D MTF was estimated through a simple surface fit with interpolation based on Delaunay triangulation of the 1D edge-based MTF measurements. Validation by synthesis was also performed with simulated images from a hypothetical direct-detection flat-panel device. Results: The 2D MTF derived from physical measurements yielded an average relative precision error of 0.26% for frequencies below the cutoff (2.5 mm{sup -1}) and approximate circular symmetry at frequencies below 4 mm{sup -1}. While slit analysis generally agreed with the results of edge analysis, the two showed subtle differences at frequencies above 4 mm{sup -1}. Slit measurement near 45 Degree-Sign revealed radial asymmetry in the MTF resulting from the square pixel aperture (0.2 mm Multiplication-Sign 0.2 mm), a characteristic which was not necessarily appreciated with the orthogonal 1D MTF measurements. In simulation experiments, both slit- and edge-based measurements resolved the radial asymmetries in the 2D MTF. The average absolute relative accuracy error in the 2D MTF between the DC and cutoff (2.5 mm{sup -1}) frequencies was 0.13% with average relative precision error of 0.11%. Other simulation results were similar to those derived from physical data. Conclusions: Overall, the general availability, acceptance, accuracy, and ease of implementation of 1D test devices for MTF assessment make this a valuable technique for 2D MTF estimation.« less

Estimation of the two-dimensional presampled modulation transfer function of digital radiography devices using one-dimensional test objects.

PubMed

Wells, Jered R; Dobbins, James T

2012-10-01

The modulation transfer function (MTF) of medical imaging devices is commonly reported in the form of orthogonal one-dimensional (1D) measurements made near the vertical and horizontal axes with a slit or edge test device. A more complete description is found by measuring the two-dimensional (2D) MTF. Some 2D test devices have been proposed, but there are some issues associated with their use: (1) they are not generally available; (2) they may require many images; (3) the results may have diminished accuracy; and (4) their implementation may be particularly cumbersome. This current work proposes the application of commonly available 1D test devices for practical and accurate estimation of the 2D presampled MTF of digital imaging systems. Theory was developed and applied to ensure adequate fine sampling of the system line spread function for 1D test devices at orientations other than approximately vertical and horizontal. Methods were also derived and tested for slit nonuniformity correction at arbitrary angle. Techniques were validated with experimental measurements at ten angles using an edge test object and three angles using a slit test device on an indirect-detection flat-panel system [GE Revolution XQ∕i (GE Healthcare, Waukesha, WI)]. The 2D MTF was estimated through a simple surface fit with interpolation based on Delaunay triangulation of the 1D edge-based MTF measurements. Validation by synthesis was also performed with simulated images from a hypothetical direct-detection flat-panel device. The 2D MTF derived from physical measurements yielded an average relative precision error of 0.26% for frequencies below the cutoff (2.5 mm(-1)) and approximate circular symmetry at frequencies below 4 mm(-1). While slit analysis generally agreed with the results of edge analysis, the two showed subtle differences at frequencies above 4 mm(-1). Slit measurement near 45° revealed radial asymmetry in the MTF resulting from the square pixel aperture (0.2 mm × 0.2 mm), a characteristic which was not necessarily appreciated with the orthogonal 1D MTF measurements. In simulation experiments, both slit- and edge-based measurements resolved the radial asymmetries in the 2D MTF. The average absolute relative accuracy error in the 2D MTF between the DC and cutoff (2.5 mm(-1)) frequencies was 0.13% with average relative precision error of 0.11%. Other simulation results were similar to those derived from physical data. Overall, the general availability, acceptance, accuracy, and ease of implementation of 1D test devices for MTF assessment make this a valuable technique for 2D MTF estimation.

SU-F-J-55: Feasibility of Supraclavicular Field Treatment by Investigating Variation of Junction Position Between Breast Tangential and Supraclavicular Fields for Deep Inspiration Breath Hold (DIBH) Left Breast Radiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, H; Sarkar, V; Paxton, A

Purpose: To explore the feasibility of supraclavicular field treatment by investigating the variation of junction position between tangential and supraclavicular fields during left breast radiation using DIBH technique. Methods: Six patients with left breast cancer treated using DIBH technique were included in this study. AlignRT system was used to track patient’s breast surface. During daily treatment, when the patient’s DIBH reached preset AlignRT tolerance of ±3mm for all principle directions (vertical, longitudinal, and lateral), the remaining longitudinal offset was recorded. The average with standard-deviation and the range of daily longitudinal offset for the entire treatment course were calculated for allmore » six patients (93 fractions totally). The ranges of average ± 1σ and 2σ were calculated, and they represent longitudinal field edge error with the confidence level of 68% and 95%. Based on these longitudinal errors, dose at junction between breast tangential and supraclavicular fields with variable gap/overlap sizes was calculated as a percentage of prescription (on a representative patient treatment plan). Results: The average of longitudinal offset for all patients is 0.16±1.32mm, and the range of longitudinal offset is −2.6 to 2.6mm. The range of longitudinal field edge error at 68% confidence level is −1.48 to 1.16mm, and at 95% confidence level is −2.80 to 2.48mm. With a 5mm and 1mm gap, the junction dose could be as low as 37.5% and 84.9% of prescription dose; with a 5mm and 1mm overlap, the junction dose could be as high as 169.3% and 117.6%. Conclusion: We observed longitudinal field edge error at 95% confidence level is about ±2.5mm, and the junction dose could reach 70% hot/cold between different DIBH. However, over the entire course of treatment, the average junction variation for all patients is within 0.2mm. The results from our study shows it is potentially feasible to treat supraclavicular field with breast tangents.« less

Parametric Studies Of Lightweight Reflectors Supported On Linear Actuator Arrays

NASA Astrophysics Data System (ADS)

Seibert, George E.

1987-10-01

This paper presents the results of numerous design studies carried out at Perkin-Elmer in support of the design of large diameter controllable mirrors for use in laser beam control, surveillance, and astronomy programs. The results include relationships between actuator location and spacing and the associated degree of correctability attainable for a variety of faceplate configurations subjected to typical disturbance environments. Normalizations and design curves obtained from closed-form equations based on thin shallow shell theory and computer based finite-element analyses are presented for use in preliminary design estimates of actuator count, faceplate structural properties, system performance prediction and weight assessments. The results of the analyses were obtained from a very wide range of mirror configurations, including both continuous and segmented mirror geometries. Typically, the designs consisted of a thin facesheet controlled by point force actuators which in turn were mounted on a structurally efficient base panel, or "reaction structure". The faceplate materials considered were fused silica, ULE fused silica, Zerodur, aluminum and beryllium. Thin solid faceplates as well as rib-reinforced cross-sections were treated, with a wide variation in thickness and/or rib patterns. The magnitude and spatial frequency distribution of the residual or uncorrected errors were related to the input error functions for mirrors of many different diameters and focal ratios. The error functions include simple sphere-to-sphere corrections, "parabolization" of spheres, and higher spatial frequency input error maps ranging from 0.5 to 7.5 cycles per diameter. The parameter which dominates all of the results obtained to date, is a structural descriptor of thin shell behavior called the characteristic length. This parameter is a function of the shell's radius of curvature, thickness, and Poisson's ratio of the material used. The value of this constant, in itself, describes the extent to which the deflection under a point force is localized by the shell's curvature. The deflection shape is typically a near-gaussian "bump" with a zero-crossing at a local radius of approximately 3.5 characteristic lengths. The amplitude is a function of the shells elastic modulus, radius, and thickness, and is linearly proportional to the applied force. This basic shell behavior is well-treated in an excellent set of papers by Eric Reissner entitled "Stresses and Small Displacements of Shallow Spherical Shells".1'2 Building on the insight offered by these papers, we developed our design tools around two derived parameters, the ratio of the mirror's diameter to its characteristic length (D/l), and the ratio of the actuator spacing to the characteristic length (b/l). The D/1 ratio determines the "finiteness" of the shell, or its dependence on edge boundary conditions. For D/1 values greater than 10, the influence of edges is almost totally absent on interior behavior. The b/1 ratio, the basis of all our normalizations is the most universal term in the description of correctability or ratio of residual/input errors. The data presented in the paper, shows that the rms residual error divided by the peak amplitude of the input error function is related to the actuator spacing to characteristic length ratio by the following expression RMS Residual Error b 3.5 k (I) (1) Initial Error Ampl. The value of k ranges from approximately 0.001 for low spatial frequency initial errors up to 0.05 for higher error frequencies (e.g. 5 cycles/diameter). The studies also yielded insight to the forces required to produce typical corrections at both the center and edges of the mirror panels. Additionally, the data lends itself to rapid evaluation of the effects of trading faceplate weight for increased actuator count,

Numerical Weather Prediction Models on Linux Boxes as tools in meteorological education in Hungary

NASA Astrophysics Data System (ADS)

Gyongyosi, A. Z.; Andre, K.; Salavec, P.; Horanyi, A.; Szepszo, G.; Mille, M.; Tasnadi, P.; Weidiger, T.

2012-04-01

Education of Meteorologist in Hungary - according to the Bologna Process - has three stages: BSc, MSc and PhD, and students graduating at each stage get the respective degree (BSc, MSc and PhD). The three year long base BSc course in Meteorology can be chosen by undergraduate students in the fields of Geosciences, Environmental Sciences and Physics. BasicsFundamentals in Mathematics (Calculus), Physics (General and Theoretical) Physics and Informatics are emphasized during their elementary education. The two year long MSc course - in which about 15 to 25 students are admitted each year - can be studied only at our the Eötvös Loránd uUniversity in the our country. Our aim is to give a basic education in all fields of Meteorology. Main topics are: Climatology, Atmospheric Physics, Atmospheric Chemistry, Dynamic and Synoptic Meteorology, Numerical Weather Prediction, modeling Modeling of surfaceSurface-atmosphere Iinteractions and Cclimate change. Education is performed in two branches: Climate Researcher and Forecaster. Education of Meteorologist in Hungary - according to the Bologna Process - has three stages: BSc, MSc and PhD, and students graduating at each stage get the respective degree. The three year long BSc course in Meteorology can be chosen by undergraduate students in the fields of Geosciences, Environmental Sciences and Physics. Fundamentals in Mathematics (Calculus), (General and Theoretical) Physics and Informatics are emphasized during their elementary education. The two year long MSc course - in which about 15 to 25 students are admitted each year - can be studied only at the Eötvös Loránd University in our country. Our aim is to give a basic education in all fields of Meteorology: Climatology, Atmospheric Physics, Atmospheric Chemistry, Dynamic and Synoptic Meteorology, Numerical Weather Prediction, Modeling of Surface-atmosphere Interactions and Climate change. Education is performed in two branches: Climate Researcher and Forecaster. Numerical modeling became a common tool in the daily practice of weather experts forecasters due to the i) increasing user demands for weather data by the costumers, ii) the growth in computer resources, iii) numerical weather prediction systems available for integration on affordable, off the shelf computers and iv) available input data (from ECMWF or NCEP) for model integrations. Beside learning the theoretical basis, since the last year. Students in their MSc or BSc Thesis Research or in Student's Research ProjectsStudent's Research Projects h have the opportunity to run numerical models and to analyze the outputs for different purposes including wind energy estimation, simulation of the dynamics of a polar low, and subtropical cyclones, analysis of the isentropic potential vorticity field, examination of coupled atmospheric dispersion models, etc. A special course in the application of numerical modeling has been held (is being announced for the upcoming semester) (is being announced for the upcoming semester) for our students in order to improve their skills on this field. Several numerical model (NRIPR ETA and WRF) systems have been adapted in the University and integrated WRF have been tested and used for the geographical region of the Carpathian Basin (NRIPR, ETA and WRF). Recently ALADIN/CHAPEAU the academic version of the ARPEGE ALADIN cy33t1 meso-scale numerical weather prediction model system (which is the operational forecasting tool of our National Weather Service) has been installed at our Institute. ALADIN is the operational forecasting model of the Hungarian Meteorological Service and developed in the framework of the international ALADIN co-operation. Our main objectives are i) the analysis of different typical weather situations, ii) fine tuning of parameterization schemes and the iii) comparison of the ALADIN/CHAPEAU and WRF model outputs based on case studies. The necessary hardware and software innovations has have been done. In the presentation the computer resources needed for the integration of both WRF and ALADIN/CHAPEAU models will be briefly described. The software developments performed for the evaluation and comparison of the different modeling systems will be demonstrated. The main objectives of the education program on the practical numerical weather modeling will be introduced, as well as its detailed thematics and the structure of the labs.

Smoking Cessation Intervention for severe Mental Ill Health Trial (SCIMITAR): a pilot randomised control trial of the clinical effectiveness and cost-effectiveness of a bespoke smoking cessation service.

PubMed

Peckham, Emily; Man, Mei-See; Mitchell, Natasha; Li, Jinshuo; Becque, Taeko; Knowles, Sarah; Bradshaw, Tim; Planner, Claire; Parrott, Steve; Michie, Susan; Shepherd, Charles; Gilbody, Simon

2015-03-01

There is a high prevalence of smoking among people who experience severe mental ill health (SMI). Helping people with disorders such as bipolar illness and schizophrenia to quit smoking would help improve their health, increase longevity and also reduce health inequalities. Around half of people with SMI who smoke express an interest in cutting down or quitting smoking. There is limited evidence that smoking cessation can be achieved for people with SMI. Those with SMI rarely access routine NHS smoking cessation services. This suggests the need to develop and evaluate a behavioural support and medication package tailored to the needs of people with SMI. The objective in this project was to conduct a pilot trial to establish acceptability of the intervention and to ensure the feasibility of recruitment, randomisation and follow-up. We also sought preliminary estimates of effect size in order to design a fully powered trial of clinical effectiveness and cost-effectiveness. The pilot should inform a fully powered trial to compare the clinical effectiveness and cost-effectiveness of a bespoke smoking cessation (BSC) intervention with usual general practitioner (GP) care for people with SMI. A pilot pragmatic two-arm individually randomised controlled trial (RCT). Simple randomisation was used following a computer-generated random number sequence. Participants and practitioners were not blinded to allocation. Primary care and secondary care mental health services in England. Smokers aged > 18 years with a severe mental illness who would like to cut down or quit smoking. A BSC intervention delivered by mental health specialists trained to deliver evidence-supported smoking cessation interventions compared with usual GP care. The primary outcome was carbon monoxide-verified smoking cessation at 12 months. Smoking-related secondary outcomes were reduction of number of cigarettes smoked, Fagerstrom test of nicotine dependence and motivation to quit (MTQ). Other secondary outcomes were Patient Health Questionnaire-9 items and Short Form Questionnaire-12 items to assess whether there were improvements or deterioration in mental health and quality of life. We also measured body mass index to assess whether or not smoking cessation was associated with weight gain. These were measured at 1, 6 and 12 months post randomisation. The trial recruited 97 people aged 19-73 years who smoked between 5 and 60 cigarettes per day (mean 25 cigarettes). Participants were recruited from four mental health trusts and 45 GP surgeries. Forty-six people were randomised to the BSC intervention and 51 people were randomised to usual GP care. The odds of quitting at 12 months was higher in the BSC intervention (36% vs. 23%) but did not reach statistical significance (odds ratio 2.9; 95% confidence interval 0.8% to 10.5%). At 3 and 6 months there was no evidence of difference in self-reported smoking cessation. There was a non-significant reduction in the number of cigarettes smoked and nicotine dependence. MTQ and number of quit attempts all increased in the BSC group compared with usual care. There was no difference in terms of quality of life at any time point, but there was evidence of an increase in depression scores at 12 months for the BSC group. There were no serious adverse events thought likely to be related to the trial interventions. The pilot economic analysis demonstrated that it was feasible to carry out a full economic analysis. It was possible to recruit people with SMI from primary and secondary care to a trial of a smoking cessation intervention based around behavioural support and medication. The overall direction of effect was a positive trend in relation to biochemically verified smoking cessation and it was feasible to obtain follow-up in a substantial proportion of participants. A definitive trial of a bespoke cessation intervention has been prioritised by the National Institute for Health Research (NIHR) and the SCIMITAR pilot trial forms a template for a fully powered RCT to examine clinical effectiveness and cost-effectiveness. Current Controlled Trials ISRCTN79497236. This project was funded by the NIHR Health Technology Assessment programme and will be published in full in Health Technology Assessment, Vol. 19, No. 25. See the NIHR Journals Library website for further project information.

Improvement on Timing Accuracy of LIDAR for Remote Sensing

NASA Astrophysics Data System (ADS)

Zhou, G.; Huang, W.; Zhou, X.; Huang, Y.; He, C.; Li, X.; Zhang, L.

2018-05-01

The traditional timing discrimination technique for laser rangefinding in remote sensing, which is lower in measurement performance and also has a larger error, has been unable to meet the high precision measurement and high definition lidar image. To solve this problem, an improvement of timing accuracy based on the improved leading-edge timing discrimination (LED) is proposed. Firstly, the method enables the corresponding timing point of the same threshold to move forward with the multiple amplifying of the received signal. Then, timing information is sampled, and fitted the timing points through algorithms in MATLAB software. Finally, the minimum timing error is calculated by the fitting function. Thereby, the timing error of the received signal from the lidar is compressed and the lidar data quality is improved. Experiments show that timing error can be significantly reduced by the multiple amplifying of the received signal and the algorithm of fitting the parameters, and a timing accuracy of 4.63 ps is achieved.

75 FR 60762 - Board of Scientific Counselors (BSC), National Center for Environmental Health/Agency for Toxic...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-01

... studies relating to the causes, diagnosis, treatment, control, and prevention of physical and mental... DEPARTMENT OF HEALTH AND HUMAN SERVICES (HHS) Centers for Disease Control and Prevention Board of... Climate Control; a discussion of ATSDR Funded State Reports; an update on Amyotrophic Lateral Sclerosis...

The National Energy Center at Bismarck State College

ERIC Educational Resources Information Center

Thigpen, Donna S.

2006-01-01

Energy production is an essential part of American society and the economy. In the best tradition of community colleges, Bismarck State College (BSC) in North Dakota has responded to the specialized training needs of industry for over 25 years by forming various collaborative efforts with the energy industry. This article presents an example of…

Teaching Scientists to Communicate: Evidence-Based Assessment for Undergraduate Science Education

ERIC Educational Resources Information Center

Mercer-Mapstone, Lucy; Kuchel, Louise

2015-01-01

Communication skills are one of five nationally recognised learning outcomes for an Australian Bachelor of Science (BSc) degree. Previous evidence indicates that communication skills taught in Australian undergraduate science degrees are not developed sufficiently to meet the requirements of the modern-day workplace--a problem faced in the UK and…

First Employment of British Pharmacology Graduates

ERIC Educational Resources Information Center

Hollingsworth, Michael; Markham, Anthony

2006-01-01

A survey was conducted in UK Universities to identify the employment of pharmacology graduates (BSc, MSc and PhD) 6 months after graduation in 2003. The aim was to provide data for the British Pharmacological Society (BPS) so they could offer advice to interested bodies and to University staff for careers information. 85% of 52 Universities…

Personal Investment in Higher Education

ERIC Educational Resources Information Center

Parzen, Maurine

2010-01-01

Since 2005, in Ontario, RPN's have had the option to return to school to obtain their BScN degree in three years of full time study instead of four years. Many of these students are mature and come with prior family and financial responsibilities that add extra challenges to their learning experience. Questioning their choice of investment in…

Collaboration -- A Key Principle in Distance Education

ERIC Educational Resources Information Center

Kennedy, David; Duffy, Tim

2004-01-01

The University of Paisley has been supporting distance learning students on online supported courses for nine years. Its largest programme in this form is the B.Sc. Health Studies degree for health professionals. The delivery of this programme is dependent on the use of information and communications technology. But the essential ingredient for…

The Determination of the Natural Abundance of the Isotopes of Chlorine: An Introductory Experiment in Mass Spectrometry.

ERIC Educational Resources Information Center

O'Malley, Rebecca M.

1982-01-01

Describes a laboratory experiment which introduces basic principles and experimental techniques of mass spectrometry for fourth year undergraduate (B.Sc.) students. Laboratory procedures, background information, and discussion of results are provided for the experiment in which the natural isotopic abundance of chlorine is determined. (Author/JN)

Household and Domestic Science: Entangling the Personal and the Professional

ERIC Educational Resources Information Center

Egan, Bridget; Goodman, Joyce

2017-01-01

This article focuses on how a BSc (Household and Social Science) from Kings College of Household and Social Science (KCHSS) inflected the life and work of Winifred Egan (1915-2007), a teacher whose career spanned elementary and secondary schooling and teacher education. The article illustrates the ways in which KCHSS graduates deployed…

A Comparison of Screening Instruments: Predictive Validity of the BESS and BSC

ERIC Educational Resources Information Center

King, Kathleen R.; Reschly, Amy L.

2014-01-01

The purpose of this study was to evaluate and compare two behavior screening instruments--the Behavioral and Emotional Screening System and the Behavior Screening Checklist. The sample consisted of 492 elementary school children from the southeastern United States. The psychometric properties of the screening instruments were evaluated in terms of…

Successful Applications of the Balanced Scorecard in Higher Education

ERIC Educational Resources Information Center

Beard, Deborah F.

2009-01-01

Are there management tools that professionals use in business that academics have used successfully in higher education? The answer to that question is "yes", and the balanced scorecard (BSC) is one such tool. The author reports on measures that administrators chose for the BSCs of 2 educational institutions whose successes have been…

Design Principles for the Development of the Balanced Scorecard

ERIC Educational Resources Information Center

Keser Ozmantar, Zehra; Gedikoglu, Tokay

2016-01-01

Purpose: The purpose of this paper is to investigate the development and implementation process of the balanced scorecard (BSC) approach in an educational institution in the context of the Turkish educational system. It also aims, on the basis of the results of the applications in a particular school, to define principles through which the…

The E-Balanced Scorecard (e-BSC) for Measuring Academic Staff Performance Excellence

ERIC Educational Resources Information Center

Yu, May Leen; Hamid, Suraya; Ijab, Mohamad Taha; Soo, Hsaio Pei

2009-01-01

This research paper is a pilot study that investigated the suitability of adopting an automated balanced scorecard for managing and measuring the performance excellence of academic staffs in the higher education setting. A comprehensive study of related literature with requirements elicited from the target population in a selected premier…

Primary Datasets for Case Studies of River-Water Quality

ERIC Educational Resources Information Center

Goulder, Raymond

2008-01-01

Level 6 (final-year BSc) students undertook case studies on between-site and temporal variation in river-water quality. They used professionally-collected datasets supplied by the Environment Agency. The exercise gave students the experience of working with large, real-world datasets and led to their understanding how the quality of river water is…

75 FR 82030 - Board of Scientific Counselors, National Center for Health Statistics (BSC, NCHS)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-29

... to be Discussed: The agenda will include welcome remarks by the Director, NCHS; an update on the Health Indicators Warehouse; an update on program reviews; and an open session for comments from the... the presenter. Written comments should not exceed five single-spaced typedpages in length and must be...

Degree of Success? A Review of Delivering BSc Honours Degrees in an FE College

ERIC Educational Resources Information Center

Griffiths, Colin; Lloyd, Mary Golding

2009-01-01

Widening participation initiatives led by the government encourage non-traditional students to enrol in higher education courses usually offered through a franchising arrangement between a Higher Education Institution (HEI) and a local Further Education Institution (FEI). The focus has been on the development of foundation degrees with most…

75 FR 39265 - Request for Nominations of Candidates To Serve on the Board of Scientific Counselors (BSC...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-08

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention (CDC) Request... Secretary, HHS; the Director, CDC and the Director, NCEH/ATSDR, regarding program goals, objectives... Management Specialist, NCEH/ ATSDR, CDC, 4770 Buford Highway (MS-F61), Chamblee, Georgia 30341. (E- mail...

77 FR 24720 - Board of Scientific Counselors, National Center for Environmental Health/Agency for Toxic...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-25

... Investigations; update on the Advisory Committee on Childhood Lead Poisoning Prevention; and updates by the BSC... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of.... L. 92-463), the Centers for Disease Control and Prevention (CDC), announces the following meeting of...

Analysing Student Performance Using Sparse Data of Core Bachelor Courses

ERIC Educational Resources Information Center

Saarela, Mirka; Karkkainen, Tommi

2015-01-01

Curricula for Computer Science (CS) degrees are characterized by the strong occupational orientation of the discipline. In the BSc degree structure, with clearly separate CS core studies, the learning skills for these and other required courses may vary a lot, which is shown in students' overall performance. To analyze this situation, we apply…

Net merit as a measure of lifetime profit: 2017 revision

USDA-ARS?s Scientific Manuscript database

Economic values in net merit (NM$) were updated in April 2017, cow livability (LIV) was included as a new trait, and body weight composite (BWC) replaced body size composite (BSC). Cows that die or are euthanized on the farm generate no beef income and may have more health expenses than cows that a...

Multivariate Gradient Analysis for Evaluating and Visualizing a Learning System Platform for Computer Programming

ERIC Educational Resources Information Center

Mather, Richard

2015-01-01

This paper explores the application of canonical gradient analysis to evaluate and visualize student performance and acceptance of a learning system platform. The subject of evaluation is a first year BSc module for computer programming. This uses "Ceebot," an animated and immersive game-like development environment. Multivariate…

Context-Based Mobile Security Enclave

DTIC Science & Technology

2012-09-01

29  c.  Change IMSI .............................30  d.  Change CellID ...........................31  e.  Change Geolocation ...Assisted Global Positioning System ADB Android Debugger API Application Programming Interface APK Android Application Package BSC Base Station...Programming Interfaces ( APIs ), which use Java compatible libraries based on Apache Harmony (an open source Java implementation developed by the Apache

Using DEMATEL approach to develop relationships of performance indicators on sustainable service only supply chain performance measurement

NASA Astrophysics Data System (ADS)

Leksono, EB; Suparno; Vanany, I.

2018-04-01

Service only supply chain (SOSC) concept is service supply chain (SSC) implementation on pure services. The globalization and stakeholder pressure makes operation of SSC should give the attention to the environment effect, community, economic and intangibility assets. SOSC performance measurement (SOSCPM) may be developed for measuring of performance for sustainability aspects and intangibility assets to meet customer satisfaction. This article discusses sustainable SOSCPM based on balanced scorecard (BSC), include sustainability aspects, intangibility and relations between perspectives and indicators. From literature review, it is found 34 performance indicators that must be confirm to expert and SC actors by survey. From survey validation using weighted average and level of consensus, it is found 29 valid indicators for processed by DEMATEL. From DEMATEL, it is found 26 indicators can be used on sustainable SOSCPM. Furthermore, innovation and growth perspective most influence to other, and customer perspective most important. Intangibility indicators incorporated on innovation and growth perspective very related with human resources. Finally, relations between perspectives and indicator used to design of BSC strategy maps.

Computer programming in the UK undergraduate mathematics curriculum

NASA Astrophysics Data System (ADS)

Sangwin, Christopher J.; O'Toole, Claire

2017-11-01

This paper reports a study which investigated the extent to which undergraduate mathematics students in the United Kingdom are currently taught to programme a computer as a core part of their mathematics degree programme. We undertook an online survey, with significant follow-up correspondence, to gather data on current curricula and received replies from 46 (63%) of the departments who teach a BSc mathematics degree. We found that 78% of BSc degree courses in mathematics included computer programming in a compulsory module but 11% of mathematics degree programmes do not teach programming to all their undergraduate mathematics students. In 2016, programming is most commonly taught to undergraduate mathematics students through imperative languages, notably MATLAB, using numerical analysis as the underlying (or parallel) mathematical subject matter. Statistics is a very popular choice in optional courses, using the package R. Computer algebra systems appear to be significantly less popular for compulsory first-year courses than a decade ago, and there was no mention of logic programming, functional programming or automatic theorem proving software. The modal form of assessment of computing modules is entirely by coursework (i.e. no examination).

Deactivation of the dimorphic fungi Histoplasma capsulatum, Blastomyces dermatitidis and Coccidioides immitis using hydrogen peroxide vapor.

PubMed

Hall, Leslie; Otter, Jonathan A; Chewins, John; Wengenack, Nancy L

2008-03-01

Hydrogen peroxide vapour (HPV) has been proposed as an alternative to formaldehyde fumigation for the decontamination of biosafety level (BSL) III laboratories. The aim of this study was to evaluate the efficacy of HPV against the dimorphic fungi Histoplasma capsulatum, Blastomyces dermatitidis and Coccidioides immitis. Working inside a class II biological safety cabinet (BSC) within a BSL III laboratory, inocula containing approximately 5-log(10) cfu/ml from the mould form of each organism suspended in RPMI medium were deposited on stainless steel discs and allowed to air dry. The organisms were exposed to HPV inside a BSC using a BIOQUELL ClarusS HPV generator. In three replicate experiments, individual discs were transferred into liquid media at timed intervals during a 105 minute HPV exposure period. Control- and HPV-exposed discs were incubated in RPMI media at 30 degrees C for 6 weeks to determine if any viable organisms remained. Positive cultures were confirmed using specific nucleic acid hybridization probes. Results indicate that H. capsulatum, B. dermatitidis and C. immitis were killed within 30 minutes of HPV exposure.

A web platform for landuse, climate, demography, hydrology and beach erosion in the Black Sea catchment

PubMed Central

Lehmann, Anthony; Guigoz, Yaniss; Ray, Nicolas; Mancosu, Emanuele; Abbaspour, Karim C.; Rouholahnejad Freund, Elham; Allenbach, Karin; De Bono, Andrea; Fasel, Marc; Gago-Silva, Ana; Bär, Roger; Lacroix, Pierre; Giuliani, Gregory

2017-01-01

The Black Sea catchment (BSC) is facing important demographic, climatic and landuse changes that may increase pollution, vulnerability and scarcity of water resources, as well as beach erosion through sea level rise. Limited access to reliable time-series monitoring data from environmental, statistical, and socio-economical sources is a major barrier to policy development and decision-making. To address these issues, a web-based platform was developed to enable discovery and access to key environmental information for the region. This platform covers: landuse, climate, and demographic scenarios; hydrology and related water vulnerability and scarcity; as well as beach erosion. Each data set has been obtained with state-of-the-art modelling tools from available monitoring data using appropriate validation methods. These analyses were conducted using global and regional data sets. The data sets are intended for national to regional assessments, for instance for prioritizing environmental protection projects and investments. Together they form a unique set of information, which lay out future plausible change scenarios for the BSC, both for scientific and policy purposes. PMID:28675383

A web platform for landuse, climate, demography, hydrology and beach erosion in the Black Sea catchment.

PubMed

Lehmann, Anthony; Guigoz, Yaniss; Ray, Nicolas; Mancosu, Emanuele; Abbaspour, Karim C; Rouholahnejad Freund, Elham; Allenbach, Karin; De Bono, Andrea; Fasel, Marc; Gago-Silva, Ana; Bär, Roger; Lacroix, Pierre; Giuliani, Gregory

2017-07-04

The Black Sea catchment (BSC) is facing important demographic, climatic and landuse changes that may increase pollution, vulnerability and scarcity of water resources, as well as beach erosion through sea level rise. Limited access to reliable time-series monitoring data from environmental, statistical, and socio-economical sources is a major barrier to policy development and decision-making. To address these issues, a web-based platform was developed to enable discovery and access to key environmental information for the region. This platform covers: landuse, climate, and demographic scenarios; hydrology and related water vulnerability and scarcity; as well as beach erosion. Each data set has been obtained with state-of-the-art modelling tools from available monitoring data using appropriate validation methods. These analyses were conducted using global and regional data sets. The data sets are intended for national to regional assessments, for instance for prioritizing environmental protection projects and investments. Together they form a unique set of information, which lay out future plausible change scenarios for the BSC, both for scientific and policy purposes.

Ectromelia virus accumulates less double-stranded RNA compared to vaccinia virus in BS-C-1 cells.

PubMed

Frey, Tiffany R; Lehmann, Michael H; Ryan, Colton M; Pizzorno, Marie C; Sutter, Gerd; Hersperger, Adam R

2017-09-01

Most orthopoxviruses, including vaccinia virus (VACV), contain genes in the E3L and K3L families. The protein products of these genes have been shown to combat PKR, a host defense pathway. Interestingly, ectromelia virus (ECTV) contains an E3L ortholog but does not possess an intact K3L gene. Here, we gained insight into how ECTV can still efficiently evade PKR despite lacking K3L. Relative to VACV, we found that ECTV-infected BS-C-1 cells accumulated considerably less double-stranded (ds) RNA, which was due to lower mRNA levels and less transcriptional read-through of some genes by ECTV. The abundance of dsRNA in VACV-infected cells, detected using a monoclonal antibody, was able to activate the RNase L pathway at late time points post-infection. Historically, the study of transcription by orthopoxviruses has largely focused on VACV as a model. Our data suggest that there could be more to learn by studying other members of this genus. Copyright © 2017 Elsevier Inc. All rights reserved.

In silico direct folding of thrombin-binding aptamer G-quadruplex at all-atom level

PubMed Central

Yang, Changwon; Kulkarni, Mandar; Lim, Manho

2017-01-01

Abstract The reversible folding of the thrombin-binding DNA aptamer G-quadruplexes (GQs) (TBA-15) starting from fully unfolded states was demonstrated using a prolonged time scale (10–12 μs) parallel tempering metadynamics (PTMetaD) simulation method in conjunction with a modified version of the AMBER bsc1 force field. For unbiased descriptions of the folding free energy landscape of TBA-15, this force field was minimally modified. From this direct folding simulation using the modified bsc1 force field, reasonably converged free energy landscapes were obtained in K+-rich aqueous solution (150 mM), providing detailed atomistic pictures of GQ folding mechanisms for TBA-15. This study found that the TBA folding occurred via multiple folding pathways with two major free energy barriers of 13 and 15 kcal/mol in the presence of several intermediate states of G-triplex variants. The early formation of these intermediates was associated with a single K+ ion capturing. Interestingly, these intermediate states appear to undergo facile transitions among themselves through relatively small energy barriers. PMID:29112755

Biological species in the viral world.

PubMed

Bobay, Louis-Marie; Ochman, Howard

2018-06-05

Due to their dependence on cellular organisms for metabolism and replication, viruses are typically named and assigned to species according to their genome structure and the original host that they infect. But because viruses often infect multiple hosts and the numbers of distinct lineages within a host can be vast, their delineation into species is often dictated by arbitrary sequence thresholds, which are highly inconsistent across lineages. Here we apply an approach to determine the boundaries of viral species based on the detection of gene flow within populations, thereby defining viral species according to the biological species concept (BSC). Despite the potential for gene transfer between highly divergent genomes, viruses, like the cellular organisms they infect, assort into reproductively isolated groups and can be organized into biological species. This approach revealed that BSC-defined viral species are often congruent with the taxonomic partitioning based on shared gene contents and host tropism, and that bacteriophages can similarly be classified in biological species. These results open the possibility to use a single, universal definition of species that is applicable across cellular and acellular lifeforms.

New Whole-House Case Study: Transformations, Inc. Net Zero Energy Communities, Devens, Easthampton, Townsend, Massachusetts

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2013-11-01

In 2009, Transformations, Inc. partnered with Building America team Building Science Corporation (BSC) to build new net zero energy houses in three developments in Massachusetts. The company has been developing strategies for cost-effective super-insulated homes in the New England market since 2006. After years of using various construction techniques, it has developed a specific set of assemblies and specifications that achieve a 44.9% reduction in energy use compared with a home built to the 2009 International Residential Code, qualifying the houses for the DOE’s Challenge Home. The super-insulated houses provide data for several research topics in a cold climate. BSCmore » studied the moisture risks in double stud walls insulated with open cell spray foam and cellulose. The mini-split air source heat pump (ASHP) research focused on the range of temperatures experienced in bedrooms as well as the homeowners’ perceptions of equipment performance. BSC also examined the developer’s financing options for the photovoltaic (PV) systems, which take advantage of Solar Renewable Energy Certificates, local incentives, and state and federal tax credits.« less

Laboratory biological safety cabinet (BSC) explosion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Al-Dahhan, Wedad H.; Al-Zuhairi, Ali Jasim; Hussein, Falah H.

Scientists at universities across Iraq are actively working to report actual incidents and accidents occurring in their laboratories in order to raise awareness and encourage openness, leading to widespread adoption of robust Chemical Safety and Security (CSS) practices. This manuscript is the first in a series of five case studies describing laboratory incidents and accidents in Iraqi university laboratories in order to share lessons learned and minimize the possibility of similar incidents in the future. In this study, we describe a serious event that resulted in a postgraduate student sustaining serious injuries when the biological safety cabinet (BSC) she wasmore » using exploded. Of particular note, the paper highlights how a combination of failures and deficiencies at many levels within an organization and its technical community (rather than a single piece of faulty equipment or the careless behavior of one person) can lead to a dangerous, potentially life-threatening incident. By openly sharing what happened along with the lessons learned from the accident, we hope to minimize the possibility of another researcher being injured in a similar incident in the future.« less

Rapid Maturation of Edge Sensor Technology and Potential Application in Large Space Telescopes with Segmented Primary Mirrors

NASA Technical Reports Server (NTRS)

Montgomery, Edward E., IV; Smith, W. Scott (Technical Monitor)

2002-01-01

This paper explores the history and results of the last two year's efforts to transition inductive edge sensor technology from Technology Readiness Level 2 to Technology Readiness Level 6. Both technical and programmatic challenges were overcome in the design, fabrication, test, and installation of over a thousand sensors making up the Segment Alignment Maintenance System (SAMs) for the 91 segment, 9.2-meter. Hobby Eberly Telescope (HET). The integration of these sensors with the control system will be discussed along with serendipitous leverage they provided for both initialization alignment and operational maintenance. The experience gained important insights into the fundamental motion mechanics of large segmented mirrors, the relative importance of the variance sources of misalignment errors, the efficient conduct of a program to mature the technology to the higher levels. Unanticipated factors required the team to develop new implementation strategies for the edge sensor information which enabled major segmented mirror controller design simplifications. The resulting increase in the science efficiency of HET will be shown. Finally, the on-going effort to complete the maturation of inductive edge sensor by delivering space qualified versions for future IR (infrared radiation) space telescopes.

Fast Edge Detection and Segmentation of Terrestrial Laser Scans Through Normal Variation Analysis

NASA Astrophysics Data System (ADS)

Che, E.; Olsen, M. J.

2017-09-01

Terrestrial Laser Scanning (TLS) utilizes light detection and ranging (lidar) to effectively and efficiently acquire point cloud data for a wide variety of applications. Segmentation is a common procedure of post-processing to group the point cloud into a number of clusters to simplify the data for the sequential modelling and analysis needed for most applications. This paper presents a novel method to rapidly segment TLS data based on edge detection and region growing. First, by computing the projected incidence angles and performing the normal variation analysis, the silhouette edges and intersection edges are separated from the smooth surfaces. Then a modified region growing algorithm groups the points lying on the same smooth surface. The proposed method efficiently exploits the gridded scan pattern utilized during acquisition of TLS data from most sensors and takes advantage of parallel programming to process approximately 1 million points per second. Moreover, the proposed segmentation does not require estimation of the normal at each point, which limits the errors in normal estimation propagating to segmentation. Both an indoor and outdoor scene are used for an experiment to demonstrate and discuss the effectiveness and robustness of the proposed segmentation method.

Investigation of TM Band-to-band Registration Using the JSC Registration Processor

NASA Technical Reports Server (NTRS)

Yao, S. S.; Amis, M. L.

1984-01-01

The JSC registration processor performs scene-to-scene (or band-to-band) correlation based on edge images. The edge images are derived from a percentage of the edge pixels calculated from the raw scene data, excluding clouds and other extraneous data in the scene. Correlations are performed on patches (blocks) of the edge images, and the correlation peak location in each patch is estimated iteratively to fractional pixel location accuracy. Peak offset locations from all patches over the scene are then considered together, and a variety of tests are made to weed out outliers and other inconsistencies before a distortion model is assumed. Thus, the correlation peak offset locations in each patch indicate quantitatively how well the two TM bands register to each other over that patch of scene data. The average of these offsets indicate the overall accuracies of the band-to-band registration. The registration processor was also used to register one acquisition to another acquisition of multitemporal TM data acquired over the same ground track. Band 4 images from both acquisitions were correlated and an rms error of a fraction of a pixel was routinely obtained.

A comparison of stratification effectiveness between the National Land Cover Data set and photointerpretation in western Oregon

Treesearch

Paul Dunham; Dale Weyermann; Dale Azuma

2002-01-01

Stratifications developed from National Land Cover Data (NLCD) and from photointerpretation (PI) were tested for effectiveness in reducing sampling error associated with estimates of timberland area and volume from FIA plots in western Oregon. Strata were created from NLCD through the aggregation of cover classes and the creation of 'edge' strata by...

Comparison of technique errors of intraoral radiographs taken on film v photostimulable phosphor (PSP) plates.

PubMed

Zhang, Wenjian; Huynh, Carolyn P; Abramovitch, Kenneth; Leon, Inga-Lill K; Arvizu, Liliana

2012-06-01

The objective of this study was to compare the technical errors of intraoral radiographs exposed on film v photostimulable phosphor (PSP) plates. The intraoral radiographic images exposed on phantoms from preclinical practical exams of dental and dental hygiene students were used. Each exam consisted of 10 designated periapical and bitewing views. A total of 107 film sets and 122 PSP sets were evaluated for technique errors, including placement, elongation, foreshortening, overlapping, cone cut, receptor bending, density, mounting, dot in apical area, and others. Some errors were further subcategorized as minor, major, or remake depending on the severity. The percentages of radiographs with various errors were compared between film and PSP by the Fisher's Exact Test. Compared with film, there was significantly less PSP foreshortening, elongation, and bending errors, but significantly more placement and overlapping errors. Using a wrong sized receptor due to the similarity of the color of the package sleeves is a unique PSP error. Optimum image quality is attainable with PSP plates as well as film. When switching from film to a PSP digital environment, more emphasis is necessary for placing the PSP plates, especially those with excessive packet edge, and then correcting the corresponding angulation for the beam alignment. Better design for improving intraoral visibility and easy identification of different sized PSP will improve the clinician's technical performance with this receptor.