Sample records for builders

  1. A Builder`s Guide to Super Good Cents Contruction and Sales.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    OSU Extension Energy Program; United States. Bonneville Power Administration.

    This Builder`s guide describes the Super Good Cents {reg_sign} program and the benefits available to participating builders. It explains the program standards and the typical building techniques used by Super Good Cents builders. Finally, the guide tells how you can participate and answers many of the questions asked by builders about the Super Good Cents program.

  2. 76 FR 2145 - Masco Builder Cabinet Group Including On-Site Leased Workers From Reserves Network, Jackson, OH...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-12

    ...,287B; TA-W-71,287C] Masco Builder Cabinet Group Including On-Site Leased Workers From Reserves Network, Jackson, OH; Masco Builder Cabinet Group, Waverly, OH; Masco Builder Cabinet Group, Seal Township, OH; Masco Builder Cabinet Group, Seaman, OH; Amended Certification Regarding Eligibility To Apply for Worker...

  3. A Builder's Guide to Super Good Cents Contruction and Sales.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    OSU Extension Energy Program; United States. Bonneville Power Administration.

    This Builder's guide describes the Super Good Cents {reg sign} program and the benefits available to participating builders. It explains the program standards and the typical building techniques used by Super Good Cents builders. Finally, the guide tells how you can participate and answers many of the questions asked by builders about the Super Good Cents program.

  4. Builders Challenge High Performance Builder Spotlight - Martha Rose Construction, Inc., Seattle, Washington

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2008-01-01

    Building America/Builders Challenge fact sheet on Martha Rose Construction, an energy-efficient home builder in marine climate using the German Passiv Haus design, improved insulation, and solar photovoltaics.

  5. Builders Challenge High Performance Builder Spotlight: Yavapai College, Chino Valley, Arizona

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2009-12-22

    Building America Builders Challenge fact sheet on Yavapai College of Chino Valley, Arizona. These college students built a Building America Builders Challenge house that achieved the remarkably low HERS score of -3 and achieved a tight building envelope.

  6. Builders Challenge High Performance Builder Spotlight - Masco Environments for Living, Las Vegas, Nevada

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2009-01-01

    Building America Builders Challenge fact sheet on Masco’s Environments for Living Certified Green demo home at the 2009 International Builders Show in Las Vegas. The home has a Home Energy Rating System (HERS) index score of 44, a right-sized air conditi

  7. Builders Challenge High Performance Builder Spotlight: David Weekley Homes, Houston, Texas

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2009-12-22

    Building America Builders Challenge fact sheet on David Weekley Homes of Houston, Texas. The builder plans homes as a "system," with features such as wood-framed walls that are air-sealed then insulated with R-13 unfaced fiberglass batts plus an external covering of R-2 polyisocyanurate rigid foam sheathing.

  8. Practices and Processes of Leading High Performance Home Builders in the Upper Midwest

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Von Thoma, E.; Ojczyk, C.

    2012-12-01

    The NorthernSTAR Building America Partnership team proposed this study to gain insight into the business, sales, and construction processes of successful high performance builders. The knowledge gained by understanding the high performance strategies used by individual builders, as well as the process each followed to move from traditional builder to high performance builder, will be beneficial in proposing more in-depth research to yield specific action items to assist the industry at large transform to high performance new home construction. This investigation identified the best practices of three successful high performance builders in the upper Midwest. In-depth field analysis of themore » performance levels of their homes, their business models, and their strategies for market acceptance were explored. All three builders commonly seek ENERGY STAR certification on their homes and implement strategies that would allow them to meet the requirements for the Building America Builders Challenge program. Their desire for continuous improvement, willingness to seek outside assistance, and ambition to be leaders in their field are common themes. Problem solving to overcome challenges was accepted as part of doing business. It was concluded that crossing the gap from code-based building to high performance based building was a natural evolution for these leading builders.« less

  9. Evaluation of the U.S. Department of Energy Challenge Home Program Certification of Production Builders

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kerrigan, P.; Loomis, H.

    2014-09-01

    The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America Program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three Cold Climate production builders in three separate US cities. BSC worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Therefore, the resulting design packages do vary from builder to builder. BSC provided support through this research project on the design, construction and performance testing ofmore » the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive or performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: 1. Adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor; 2. Increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense(R) Efficient Hot Water Distribution requirement.« less

  10. Builder 1 & C: Naval Training Command Rate Training Manual. Revised 1973.

    ERIC Educational Resources Information Center

    Naval Training Command, Pensacola, FL.

    The training manual is designed to help Navy personnel meet the occupational qualifications for advancement to Builder First Class and Chief Builder. The introductory chapter provides information to aid personnel in their preparation for advancement and outlines the scope of the Builder rating and the types of billets to which he can be assigned.…

  11. Space Construction Automated Fabrication Experiment Definition Study (SCAFEDS), part 3. Volume 2: Study results

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The detailed results of all part 3 study tasks are presented. Selected analysis was performed on the beam builder conceptual design. The functions of the beam builder and a ground test beam builder were defined. Jig and fixture concepts were developed and the developmental plans of the beam builder were expounded.

  12. Radon

    MedlinePlus

    ... My Home? Radon Guide for Tenants Builders and Contractors Radon-Resistant Construction Basics and Techniques EPA's Directory of Builders Resources for Builders and Contractors Radon Action Plans The National Radon Action Plan ( ...

  13. Building America Top Innovations 2012: Reduced Call-Backs with High-Performance Production Builders

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    2013-01-01

    This Building America Top Innovations profile describes ways Building America teams have helped builders cut call-backs. Harvard University study found builders who worked with Building America had a 50% drop in call-backs. One builder reported a 50-fold reduction in the incidence of pipe freezing, a 50% reduction in drywall cracking, and a 60% decline in call-backs.

  14. Building America Case Study: Meeting DOE Challenge Home Program Certification, Chicago, Illinois; Denver, Colorado; Devens, Massachusetts (Fact Sheet)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America Program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three Cold Climate production builders in three separate US cities. BSC worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Therefore, the resulting design packages do vary from builder to builder. BSC provided support through this research project on the design, construction and performance testing ofmore » the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive or performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: 1. Adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor. 2. Increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense Efficient Hot Water Distribution requirement.« less

  15. Designing integrated computational biology pipelines visually.

    PubMed

    Jamil, Hasan M

    2013-01-01

    The long-term cost of developing and maintaining a computational pipeline that depends upon data integration and sophisticated workflow logic is too high to even contemplate "what if" or ad hoc type queries. In this paper, we introduce a novel application building interface for computational biology research, called VizBuilder, by leveraging a recent query language called BioFlow for life sciences databases. Using VizBuilder, it is now possible to develop ad hoc complex computational biology applications at throw away costs. The underlying query language supports data integration and workflow construction almost transparently and fully automatically, using a best effort approach. Users express their application by drawing it with VizBuilder icons and connecting them in a meaningful way. Completed applications are compiled and translated as BioFlow queries for execution by the data management system LifeDB, for which VizBuilder serves as a front end. We discuss VizBuilder features and functionalities in the context of a real life application after we briefly introduce BioFlow. The architecture and design principles of VizBuilder are also discussed. Finally, we outline future extensions of VizBuilder. To our knowledge, VizBuilder is a unique system that allows visually designing computational biology pipelines involving distributed and heterogeneous resources in an ad hoc manner.

  16. DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    This builder built fourteen homes in the Gordon Estates subdivision that achieved Challenge Home certification with HERS 38–58 on an affordable budget for homeowners. Every Mandalay home in the development also met the National Green Building Standard gold level. The Gordon Estates subdivision is also serving as a showcase of energy efficiency, and Mandalay is hosting education workshops for realtors, state and local officials, other builders, students, potential homeowners, and the public. The builder won a 2013 Housing Innovation Award in the affordable builder category.

  17. Evaluation of the U.S. Department of Energy Challenge Home Program Certification of Production Builders

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kerrigan, P.; Loomis, H.

    2014-09-01

    The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three cold climate production builders in three U.S. cities and worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Also, BSC provided support through performance testing of the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive ormore » performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor; and increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense® Efficient Hot Water Distribution requirement.« less

  18. Knowledge transfer to builders in post-disaster housing reconstruction in West-Sumatra of Indonesia

    NASA Astrophysics Data System (ADS)

    Hidayat, Benny; Afif, Zal

    2017-11-01

    Housing is the most affected sector by disasters as can be observed after the 2009 earthquake in West Sumatra province in Indonesia. As in Indonesian construction industry, the housing post-disaster reconstruction is influenced by knowledge and skills of builders or laborers, or locally known as `tukang'. After the earthquake there were trainings to transfer knowledge about earthquake-safe house structure for the builders in the post-disaster reconstruction. This study examined the effectiveness of the training in term of understanding of the builders and application of the new knowledge. Ten semi-structured interviews with the builders were conducted in this study. The results indicate that the builders with prior housing construction experience can absorb and understand the new knowledge about earthquake-safe house structure. Combination of lecturing and practice sessions also help the builders to understand the knowledge. However, findings of this research also suggest there is a problem in implementation of the new knowledge. Utilization of earthquake-safe house structure may leads to a rise in house cost. As a result, some house owners prefer to save money than to adopt the new knowledge.

  19. Builders Challenge High Performance Builder Spotlight: Artistic Homes, Albuquerque, New Mexico

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2009-12-22

    Building America Builders Challenge fact sheet on Artistic Homes of Albuquerque, New Mexico. Standard features of their homes include advanced framed 2x6 24-inch on center walls, R-21 blown insulation in the walls, and high-efficiency windows.

  20. Green Builder Coalition |

    Science.gov Websites

    - Learn More Here - Join the Green Builder® Coalition today! - The Coalition supports the SAVE Act Assistance Advocacy Member Benefits Join Contact © 2016 Green Builder Coalition - Newsletter Signup - info @greenbuildercoalition.org - This site is green - Website by Triple Smart Follow Us

  1. Builders Challenge High Performance Builder Spotlight - Artistic Homes, Albuquerque, NM

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2009-01-01

    Building America Builders Challenge fact sheet on Artistic Homes of Albuquerque, New Mexico. Describes the first true zero E-scale home in a hot-dry climate with ducts inside, R-50 attic insulation, roof-mounted photovoltaic power system, and solar thermal water heating.

  2. Building America Case Study: New Town Builders' Power of Zero Energy Center, Denver, Colorado (Brochure)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    New Town Builders, a builder of energy efficient homes in Denver, Colorado, offers a zero energy option for all the homes it builds. To attract a wide range of potential homebuyers to its energy efficient homes, New Town Builders created a 'Power of Zero Energy Center' linked to its model home in the Stapleton community of Denver. This case study presents New Town Builders' marketing approach, which is targeted to appeal to homebuyers' emotions rather than overwhelming homebuyers with scientific details about the technology. The exhibits in the Power of Zero Energy Center focus on reduced energy expenses for themore » homeowner, improved occupant comfort, the reputation of the builder, and the lack of sacrificing the homebuyers' desired design features to achieve zero net energy in the home. The case study also contains customer and realtor testimonials related to the effectiveness of the Center in influencing homebuyers to purchase a zero energy home.« less

  3. New Whole-House Solutions Case Study: New Town Builders' Power of Zero Energy Center - Denver, Colorado

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    New Town Builders, a builder of energy efficient homes in Denver, Colorado, offers a zero energy option for all the homes it builds. To attract a wide range of potential homebuyers to its energy efficient homes, New Town Builders created a "Power of Zero Energy Center" linked to its model home in the Stapleton community. This case study presents New Town Builders' marketing approach, which is targeted to appeal to homebuyers' emotions rather than overwhelming homebuyers with scientific details about the technology. The exhibits in the Power of Zero Energy Center focus on reduced energy expenses for the homeowner, improvedmore » occupant comfort, the reputation of the builder, and the lack of sacrificing the homebuyers' desired design features to achieve zero net energy in the home. This case study also contains customer and realtor testimonials related to the effectiveness of the Center in influencing homebuyers to purchase a zero energy home.« less

  4. Wildlife Scenario Builder and User's Guide (Version 1.0, Beta Test)

    EPA Science Inventory

    Cover of the Wildlife Scenario Builder User's Manual The Wildlife Scenario Builder (WSB) was developed to improve the quality of wildlif...

  5. 78 FR 42122 - Bridge Builder Trust and Olive Street Investment Advisers, LLC; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-15

    ... SECURITIES AND EXCHANGE COMMISSION [Investment Company Act Release No. 30592; 812-14118] Bridge...: Bridge Builder Trust (the ``Trust'') and Olive Street Investment Advisers (the ``Adviser'') (collectively... the requested order as a Fund is the Bridge Builder Bond Fund. For purposes of the requested order...

  6. 76 FR 19466 - Masco Builder Cabinet Group Including On-Site Leased Workers From Reserves Network, Reliable...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-07

    ... Builder Cabinet Group Including On-Site Leased Workers From Reserves Network, Reliable Staffing, and Third Dimension Waverly, OH; Masco Builder Cabinet Group Including On-Site Leased Workers From Reserves Network... Group including on-site leased workers from Reserves Network, Jackson, Ohio. The workers produce...

  7. 76 FR 13226 - Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-10

    ... BUILDER CABINET GROUP INCLUDING ON-SITE LEASED WORKERS FROM RESERVES NETWORK AND RELIABLE STAFFING WAVERLY, OHIO. TA-W-71,287B MASCO BUILDER CABINET GROUP INCLUDING ON-SITE LEASED WORKERS FROM RESERVES NETWORK... Builder Cabinet Group, including on-site leased workers from Reserves Network and Reliable Staffing...

  8. DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    This builder took home the Grand Winner prize in the Custom Builder category in the 2014 Housing Innovation Awards for its high performance building science approach. The builder used insulated concrete form blocks to create the insulated crawlspace foundation for its first DOE Zero Energy Ready Home, the first net zero energy new home certified in the state of California.

  9. 46 CFR 388.4 - Criteria for grant of a waiver.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... unduly adversely affect— (i) United States vessel builders; or (ii) The coastwise trade business of any person who employs vessels built in the United States in that business. (2) The determination of “unduly... builders: Whether a potentially affected U.S. vessel builder has a history of construction of similar...

  10. Energy Conservation for the Home Builder: A Course for Residential Builders. Course Outline and Instructional Materials.

    ERIC Educational Resources Information Center

    Koenigshofer, Daniel R.

    Background information, handouts and related instructional materials comprise this manual for conducting a course on energy conservation for home builders. Information presented in the five- and ten-hour course is intended to help residential contractors make appropriate and cost-effective decisions in constructing energy-efficient dwellings.…

  11. ABodyBuilder: Automated antibody structure prediction with data–driven accuracy estimation

    PubMed Central

    Leem, Jinwoo; Dunbar, James; Georges, Guy; Shi, Jiye; Deane, Charlotte M.

    2016-01-01

    ABSTRACT Computational modeling of antibody structures plays a critical role in therapeutic antibody design. Several antibody modeling pipelines exist, but no freely available methods currently model nanobodies, provide estimates of expected model accuracy, or highlight potential issues with the antibody's experimental development. Here, we describe our automated antibody modeling pipeline, ABodyBuilder, designed to overcome these issues. The algorithm itself follows the standard 4 steps of template selection, orientation prediction, complementarity-determining region (CDR) loop modeling, and side chain prediction. ABodyBuilder then annotates the ‘confidence’ of the model as a probability that a component of the antibody (e.g., CDRL3 loop) will be modeled within a root–mean square deviation threshold. It also flags structural motifs on the model that are known to cause issues during in vitro development. ABodyBuilder was tested on 4 separate datasets, including the 11 antibodies from the Antibody Modeling Assessment–II competition. ABodyBuilder builds models that are of similar quality to other methodologies, with sub–Angstrom predictions for the ‘canonical’ CDR loops. Its ability to model nanobodies, and rapidly generate models (∼30 seconds per model) widens its potential usage. ABodyBuilder can also help users in decision–making for the development of novel antibodies because it provides model confidence and potential sequence liabilities. ABodyBuilder is freely available at http://opig.stats.ox.ac.uk/webapps/abodybuilder. PMID:27392298

  12. 46 CFR 308.409 - Standard form of War Risk Builder's Risk Insurance Policy, Form MA-283.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Standard form of War Risk Builder's Risk Insurance Policy, Form MA-283. 308.409 Section 308.409 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.409 Standard form...

  13. 46 CFR 308.409 - Standard form of War Risk Builder's Risk Insurance Policy, Form MA-283.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 8 2013-10-01 2013-10-01 false Standard form of War Risk Builder's Risk Insurance Policy, Form MA-283. 308.409 Section 308.409 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.409 Standard form...

  14. 46 CFR 308.409 - Standard form of War Risk Builder's Risk Insurance Policy, Form MA-283.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Standard form of War Risk Builder's Risk Insurance Policy, Form MA-283. 308.409 Section 308.409 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.409 Standard form...

  15. 46 CFR 308.409 - Standard form of War Risk Builder's Risk Insurance Policy, Form MA-283.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 8 2012-10-01 2012-10-01 false Standard form of War Risk Builder's Risk Insurance Policy, Form MA-283. 308.409 Section 308.409 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.409 Standard form...

  16. 46 CFR 308.409 - Standard form of War Risk Builder's Risk Insurance Policy, Form MA-283.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Standard form of War Risk Builder's Risk Insurance Policy, Form MA-283. 308.409 Section 308.409 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.409 Standard form...

  17. 77 FR 49003 - Notice of Proposed Information Collection for Public Comment: Request for Acceptance of Changes...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-15

    ... changes may affect the value shown on the DUD commitment. HUD requires the builder to use form HUD-92577... changes may affect the value shown on the DUD commitment. HUD requires the builder to use form HUD -92577... specifications for proposed construction properties as required by homebuyers or determined by the builder use...

  18. Transitioning to High Performance Homes: Successes and Lessons Learned From Seven Builders

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Widder, Sarah H.; Kora, Angela R.; Baechler, Michael C.

    2013-03-01

    As homebuyers are becoming increasingly concerned about rising energy costs and the impact of fossil fuels as a major source of greenhouse gases, the returning new home market is beginning to demand energy-efficient and comfortable high-performance homes. In response to this, some innovative builders are gaining market share because they are able to market their homes’ comfort, better indoor air quality, and aesthetics, in addition to energy efficiency. The success and marketability of these high-performance homes is creating a builder demand for house plans and information about how to design, build, and sell their own low-energy homes. To help makemore » these and other builders more successful in the transition to high-performance construction techniques, Pacific Northwest National Laboratory (PNNL) partnered with seven interested builders in the hot humid and mixed humid climates to provide technical and design assistance through two building science firms, Florida Home Energy and Resources Organization (FL HERO) and Calcs-Plus, and a designer that offers a line of stock plans designed specifically for energy efficiency, called Energy Smart Home Plans (ESHP). This report summarizes the findings of research on cost-effective high-performance whole-house solutions, focusing on real-world implementation and challenges and identifying effective solutions. The ensuing sections provide project background, profile each of the builders who participated in the program, and describe their houses’ construction characteristics, key challenges the builders encountered during the construction and transaction process); and present primary lessons learned to be applied to future projects. As a result of this technical assistance, 17 homes have been built featuring climate-appropriate efficient envelopes, ducts in conditioned space, and correctly sized and controlled heating, ventilation, and air-conditioning systems. In addition, most builders intend to integrate high-performance features into most or all their homes in the future. As these seven builders have demonstrated, affordable, high-performance homes are possible, but require attention to detail and flexibility in design to accommodate specific regional geographic or market-driven constraints that can increase cost. With better information regarding how energy-efficiency trade-offs or design choices affect overall home performance, builders can make informed decisions regarding home design and construction to minimize cost without sacrificing performance and energy savings.« less

  19. DOE Zero Energy Ready Home Case Study: Sterling Brook Custom Homes — Village Park Eco Home, Double Park, TX

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    This builder won a Custom Builder honor in the 2014 Housing Innovation Awards for this showcase home that serves as an energy-efficient model home for the custom home builder: 1,300 visitors toured the home, thousands more learned about the home’s advanced construction via the webpage, YouTube, Twitter, Facebook, Instagram, and Pinterest.

  20. Cost and time study for constructing raised wood floor systems in the Gulf Coast Region of the United States

    Treesearch

    Marie Del Bianco; David B. McKeever; Lance Barta

    2012-01-01

    This report is the result of a co-operative effort between the USDA Forest Service, Forest Products Laboratory (FPL) Advanced Housing Research Center, the National Assocation of Home Builders (NAHB) Research Center, and builder members of the Metropolitan Mobile and Baldwin County Home Builders Associations. The study was undertaken to further knowledge that will...

  1. Transforming Junior Leader Development: Developing the Next Generation of Pentathletes

    DTIC Science & Technology

    2007-12-14

    22 and include the strategic leader competency of world-class warrior. Army Leaders serve as a role 69 model, team builder , warrior, influencer... builder ; 4. Upholds the highest standards of duty, honor, integrity, and character. Leadership and learning are indispensable to each other...national goals; c. Innovative thinkers, self-aware, culturally astute, diplomatically aware, and cohesive team builders ; d. Torchbearers of the highest

  2. Business Metrics for High-Performance Homes: A Colorado Springs Case Study

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Beach, R.; Jones, A.

    This report explores the correlation between energy efficiency and the business success of home builders by examining a data set of builders and homes in the Colorado Springs, Colorado, market between 2006 and 2014. During this time, the Great Recession of 2007 to 2009 occurred, and new-home sales plummeted both nationally and in Colorado Springs. What is evident from an analysis of builders and homes in Colorado Springs is that builders who had Home Energy Rating System (HERS) ratings performed on some or all of their homes during the Recession remained in business during this challenging economic period. Many buildersmore » who did not have HERS ratings performed on their homes at that time went out of business or left the area. From the analysis presented in this report, it is evident that a correlation exists between energy efficiency and the business success of home builders, although the reasons for this correlation remain largely anecdotal and not yet clearly understood.« less

  3. An empirical analysis of an innovative application for an underutilized resource: small-diameter roundwood in recreational buildings

    Treesearch

    Randall Cantrell

    2004-01-01

    Builders were surveyed to explore perceptions regarding small-diameter roundwood (SDR). The study empirically tests a model of builders’ attitudes and opinions about using SDR as a building material in recreational buildings. Findings suggest that, of the 130 builders surveyed, most are likely to use SDR in recreational buildings when it meets the following criteria: 1...

  4. Arntz Builders, Inc. Information Sheet

    EPA Pesticide Factsheets

    Arntz Builders, Inc. (the Company) is located in Novato, California. The settlement involves renovation activities conducted at property constructed prior to 1978, located in San Francisco, California.

  5. Rodan Builders, Inc. Information Sheet

    EPA Pesticide Factsheets

    Rodan Builders, Inc. (the Company) is located in Burlingame, California. The settlement involves renovation activities conducted at property constructed prior to 1978, located in San Francisco, California.

  6. USS Cal Builders, Inc. Information Sheet

    EPA Pesticide Factsheets

    USS Cal Builders, Inc. (the Company) is located in Stanton, California. The settlement involves renovation activities conducted at property constructed prior to 1978, located in San Francisco, California.

  7. CHARMM-GUI 10 Years for Biomolecular Modeling and Simulation

    PubMed Central

    Jo, Sunhwan; Cheng, Xi; Lee, Jumin; Kim, Seonghoon; Park, Sang-Jun; Patel, Dhilon S.; Beaven, Andrew H.; Lee, Kyu Il; Rui, Huan; Roux, Benoît; MacKerell, Alexander D.; Klauda, Jeffrey B.; Qi, Yifei

    2017-01-01

    CHARMM-GUI, http://www.charmm-gui.org, is a web-based graphical user interface that prepares complex biomolecular systems for molecular simulations. CHARMM-GUI creates input files for a number of programs including CHARMM, NAMD, GROMACS, AMBER, GENESIS, LAMMPS, Desmond, OpenMM, and CHARMM/OpenMM. Since its original development in 2006, CHARMM-GUI has been widely adopted for various purposes and now contains a number of different modules designed to set up a broad range of simulations: (1) PDB Reader & Manipulator, Glycan Reader, and Ligand Reader & Modeler for reading and modifying molecules; (2) Quick MD Simulator, Membrane Builder, Nanodisc Builder, HMMM Builder, Monolayer Builder, Micelle Builder, and Hex Phase Builder for building all-atom simulation systems in various environments; (3) PACE CG Builder and Martini Maker for building coarse-grained simulation systems; (4) DEER Facilitator and MDFF/xMDFF Utilizer for experimentally guided simulations; (5) Implicit Solvent Modeler, PBEQ-Solver, and GCMC/BD Ion Simulator for implicit solvent related calculations; (6) Ligand Binder for ligand solvation and binding free energy simulations; and (7) Drude Prepper for preparation of simulations with the CHARMM Drude polarizable force field. Recently, new modules have been integrated into CHARMM-GUI, such as Glycolipid Modeler for generation of various glycolipid structures, and LPS Modeler for generation of lipopolysaccharide structures from various Gram-negative bacteria. These new features together with existing modules are expected to facilitate advanced molecular modeling and simulation thereby leading to an improved understanding of the molecular details of the structure and dynamics of complex biomolecular systems. Here, we briefly review these capabilities and discuss potential future directions in the CHARMM-GUI development project. PMID:27862047

  8. CHARMM-GUI 10 years for biomolecular modeling and simulation.

    PubMed

    Jo, Sunhwan; Cheng, Xi; Lee, Jumin; Kim, Seonghoon; Park, Sang-Jun; Patel, Dhilon S; Beaven, Andrew H; Lee, Kyu Il; Rui, Huan; Park, Soohyung; Lee, Hui Sun; Roux, Benoît; MacKerell, Alexander D; Klauda, Jeffrey B; Qi, Yifei; Im, Wonpil

    2017-06-05

    CHARMM-GUI, http://www.charmm-gui.org, is a web-based graphical user interface that prepares complex biomolecular systems for molecular simulations. CHARMM-GUI creates input files for a number of programs including CHARMM, NAMD, GROMACS, AMBER, GENESIS, LAMMPS, Desmond, OpenMM, and CHARMM/OpenMM. Since its original development in 2006, CHARMM-GUI has been widely adopted for various purposes and now contains a number of different modules designed to set up a broad range of simulations: (1) PDB Reader & Manipulator, Glycan Reader, and Ligand Reader & Modeler for reading and modifying molecules; (2) Quick MD Simulator, Membrane Builder, Nanodisc Builder, HMMM Builder, Monolayer Builder, Micelle Builder, and Hex Phase Builder for building all-atom simulation systems in various environments; (3) PACE CG Builder and Martini Maker for building coarse-grained simulation systems; (4) DEER Facilitator and MDFF/xMDFF Utilizer for experimentally guided simulations; (5) Implicit Solvent Modeler, PBEQ-Solver, and GCMC/BD Ion Simulator for implicit solvent related calculations; (6) Ligand Binder for ligand solvation and binding free energy simulations; and (7) Drude Prepper for preparation of simulations with the CHARMM Drude polarizable force field. Recently, new modules have been integrated into CHARMM-GUI, such as Glycolipid Modeler for generation of various glycolipid structures, and LPS Modeler for generation of lipopolysaccharide structures from various Gram-negative bacteria. These new features together with existing modules are expected to facilitate advanced molecular modeling and simulation thereby leading to an improved understanding of the structure and dynamics of complex biomolecular systems. Here, we briefly review these capabilities and discuss potential future directions in the CHARMM-GUI development project. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  9. [Character accentuations as a criterion for psychological risks in the professional activity of the builders of main gas pipelines in the conditions of arctic].

    PubMed

    Korneeva, Ia A; Simonova, N N

    2015-01-01

    The article is devoted to the study of character accentuations as a criterion for psychological risks in the professional activity of builders of main gas pipelines in the conditions of Arctic. to study the severity of character accentuations in rotation-employed builders of main gas pipelines, stipulated by their professional activities, as well as personal resources to overcome these destructions. The study involved 70 rotation-employed builders of trunk pipelines, working in the Tyumen Region (duration of the shift-in--52 days), aged from 23 to 59 (mean age 34,9 ± 8.1) years, with the experience of work from 0.5 years to 14 years (the average length of 4.42 ± 3.1). Methods of the study: questionnaires, psychological testing, participant observation. One-Sample t-test of Student, multiple regression analysis, incremental analysis. In the work there were revealed differences of expression of character accentuations in builders of trunk pipelines with experience in work on rotation less and more than five years. There was determined that builders of the main gas pipelines, working on the rotation in Arctic, with more pronounced accentuation ofthe character use mainly psychological defenses of compensation, substitution and denial, and have an average level of expression of flexibility as the regulatory process.

  10. Muscular development and lean body weight in body builders and weight lifters.

    PubMed

    Katch, V L; Katch, F I; Moffatt, R; Gittleson, M

    1980-01-01

    The extent of extreme muscular development in 39 males identified as body builders (N = 18), power weight lifters (N = 13), and Olympic weight lifters (N = 8) were studied. Body composition and anthropometric data, including calculations of pre-excess muscle body weight (scale weight minus excess muscle) were obtained. The lean body weight and percent fats of the subjects were: body builders = 74.6 kg, 9.3%; power weight lifters = 73.3 kg, 9.1%; and Olympic weight lifters = 68.2 kg, 10.8%. No group differences were present in frame size, percent fat, lean body weight, skinfolds, and diameter measurements. The only group differences were for the shoulders, chest, biceps relaxed and flexed, and forearm girths. In each case the body builders were larger. Calculations of excess muscle by the Behnke method revealed that the body builders had 15.6 kg excess muscle, power weight lifters 14.8 kg, and Olympic weight lifters 13.1 kg. Somatographic comparisons revealed only slight differences between the groups, while differences with reference man were substantial.

  11. Technology Solutions Case Study: Zero Energy Ready Home and the Challenge of Hot Water on Demand

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    Production builders in the Stapleton community of Denver, Colorado, now build 2,300-ft2 or larger homes that earn the U.S. Environmental Protection Agency (EPA) ENERGY STAR® through the Certified Homes Program, Version 3. These builders are repositioning to build comparably sized homes to the standards of the U.S. Department of Energy’s (DOE’s) Zero Energy Ready Home (ZERH) program. Most ZERH criteria align closely with ENERGY STAR and are familiar to these builders.

  12. 15. Detail view of Boston Bridge Works builders plate, north ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Detail view of Boston Bridge Works builders plate, north portal brace, looking southwest - India Point Railroad Bridge, Spanning Seekonk River between Providence & East Providence, Providence, Providence County, RI

  13. James Williamson d/b/a Golden Triangle Builders Information Sheet

    EPA Pesticide Factsheets

    James Williamson d/b/a Golden Triangle Builders (the Company) is located in Pittsburgh, Pennsylvania. The settlement involves renovation activities conducted at property constructed prior to 1978, located in Pittsburgh, Pennsylvania.

  14. Kotai Antibody Builder: automated high-resolution structural modeling of antibodies.

    PubMed

    Yamashita, Kazuo; Ikeda, Kazuyoshi; Amada, Karlou; Liang, Shide; Tsuchiya, Yuko; Nakamura, Haruki; Shirai, Hiroki; Standley, Daron M

    2014-11-15

    Kotai Antibody Builder is a Web service for tertiary structural modeling of antibody variable regions. It consists of three main steps: hybrid template selection by sequence alignment and canonical rules, 3D rendering of alignments and CDR-H3 loop modeling. For the last step, in addition to rule-based heuristics used to build the initial model, a refinement option is available that uses fragment assembly followed by knowledge-based scoring. Using targets from the Second Antibody Modeling Assessment, we demonstrate that Kotai Antibody Builder generates models with an overall accuracy equal to that of the best-performing semi-automated predictors using expert knowledge. Kotai Antibody Builder is available at http://kotaiab.org standley@ifrec.osaka-u.ac.jp. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  15. GeoBuilder: a geometric algorithm visualization and debugging system for 2D and 3D geometric computing.

    PubMed

    Wei, Jyh-Da; Tsai, Ming-Hung; Lee, Gen-Cher; Huang, Jeng-Hung; Lee, Der-Tsai

    2009-01-01

    Algorithm visualization is a unique research topic that integrates engineering skills such as computer graphics, system programming, database management, computer networks, etc., to facilitate algorithmic researchers in testing their ideas, demonstrating new findings, and teaching algorithm design in the classroom. Within the broad applications of algorithm visualization, there still remain performance issues that deserve further research, e.g., system portability, collaboration capability, and animation effect in 3D environments. Using modern technologies of Java programming, we develop an algorithm visualization and debugging system, dubbed GeoBuilder, for geometric computing. The GeoBuilder system features Java's promising portability, engagement of collaboration in algorithm development, and automatic camera positioning for tracking 3D geometric objects. In this paper, we describe the design of the GeoBuilder system and demonstrate its applications.

  16. The Misuse of Anabolic-Androgenic Steroids among Iranian Recreational Male Body-Builders and Their Related Psycho-Socio-Demographic factors

    PubMed Central

    ANGOORANI, Hooman; HALABCHI, Farzin

    2015-01-01

    Background: The high prevalence and potential side effects of anabolic-androgenic steroids (AAS) misuse by athletes has made it a major public health concern. Epidemiological studies on the abuse of such drugs are mandatory for developing effective preventive drug control programs in sports community. This study aimed to investigate the prevalence of AAS abuse and their association with some psycho-socio-demographic factors in Iranian male recreational body-builders. Methods: Between March and October 2011; 906 recreational male body-builders from 103 randomly selected bodybuilding clubs in Tehran, Iran were participated in this study. Some psycho-socio- demographic factors including age, job, average family income, family size, sport experience (months), weekly duration of the sporting activity (h), purpose of participation in sporting activity, mental health as well as body image (via General Health Questionnaire and Multidimensional Body-Self Relations Questionnaire, respectively), and history of AAS use were obtained by interviews using questionnaires. Results: Participants were all recreational male body-builders [mean age (SD): 25.7 (7.1), ranging 14–56 yr]. Self-report of AAS abuse was registered in 150 body-builders (16.6%). Among different psycho-socio-demographic factors, only family income and sport experience were inversely associated with AAS abuse. Conclusion: Lifetime prevalence of AAS abuse is relatively high among recreational body-builders based on their self-report. Some psycho-socio-demographic factors including family income and sport experience may influence the prevalence of AAS abuse. PMID:26811817

  17. The Misuse of Anabolic-Androgenic Steroids among Iranian Recreational Male Body-Builders and Their Related Psycho-Socio-Demographic factors.

    PubMed

    Angoorani, Hooman; Halabchi, Farzin

    2015-12-01

    The high prevalence and potential side effects of anabolic-androgenic steroids (AAS) misuse by athletes has made it a major public health concern. Epidemiological studies on the abuse of such drugs are mandatory for developing effective preventive drug control programs in sports community. This study aimed to investigate the prevalence of AAS abuse and their association with some psycho-socio-demographic factors in Iranian male recreational body-builders. Between March and October 2011; 906 recreational male body-builders from 103 randomly selected bodybuilding clubs in Tehran, Iran were participated in this study. Some psycho-socio- demographic factors including age, job, average family income, family size, sport experience (months), weekly duration of the sporting activity (h), purpose of participation in sporting activity, mental health as well as body image (via General Health Questionnaire and Multidimensional Body-Self Relations Questionnaire, respectively), and history of AAS use were obtained by interviews using questionnaires. Participants were all recreational male body-builders [mean age (SD): 25.7 (7.1), ranging 14-56 yr]. Self-report of AAS abuse was registered in 150 body-builders (16.6%). Among different psycho-socio-demographic factors, only family income and sport experience were inversely associated with AAS abuse. Lifetime prevalence of AAS abuse is relatively high among recreational body-builders based on their self-report. Some psycho-socio-demographic factors including family income and sport experience may influence the prevalence of AAS abuse.

  18. Automated 3D Damaged Cavity Model Builder for Lower Surface Acreage Tile on Orbiter

    NASA Technical Reports Server (NTRS)

    Belknap, Shannon; Zhang, Michael

    2013-01-01

    The 3D Automated Thermal Tool for Damaged Acreage Tile Math Model builder was developed to perform quickly and accurately 3D thermal analyses on damaged lower surface acreage tiles and structures beneath the damaged locations on a Space Shuttle Orbiter. The 3D model builder created both TRASYS geometric math models (GMMs) and SINDA thermal math models (TMMs) to simulate an idealized damaged cavity in the damaged tile(s). The GMMs are processed in TRASYS to generate radiation conductors between the surfaces in the cavity. The radiation conductors are inserted into the TMMs, which are processed in SINDA to generate temperature histories for all of the nodes on each layer of the TMM. The invention allows a thermal analyst to create quickly and accurately a 3D model of a damaged lower surface tile on the orbiter. The 3D model builder can generate a GMM and the correspond ing TMM in one or two minutes, with the damaged cavity included in the tile material. A separate program creates a configuration file, which would take a couple of minutes to edit. This configuration file is read by the model builder program to determine the location of the damage, the correct tile type, tile thickness, structure thickness, and SIP thickness of the damage, so that the model builder program can build an accurate model at the specified location. Once the models are built, they are processed by the TRASYS and SINDA.

  19. e-Stars Template Builder

    NASA Technical Reports Server (NTRS)

    Cox, Brian

    2003-01-01

    e-Stars Template Builder is a computer program that implements a concept of enabling users to rapidly gain access to information on projects of NASA's Jet Propulsion Laboratory. The information about a given project is not stored in a data base, but rather, in a network that follows the project as it develops. e-Stars Template Builder resides on a server computer, using Practical Extraction and Reporting Language (PERL) scripts to create what are called "e-STARS node templates," which are software constructs that allow for project-specific configurations. The software resides on the server and does not require specific software on the user machine except for an Internet browser. A user's computer need not be equipped with special software (other than an Internet-browser program). e-Stars Template Builder is compatible with Windows, Macintosh, and UNIX operating systems. A user invokes e-Stars Template Builder from a browser window. Operations that can be performed by the user include the creation of child processes and the addition of links and descriptions of documentation to existing pages or nodes. By means of this addition of "child processes" of nodes, a network that reflects the development of a project is generated.

  20. Best Practices Case Study: Devoted Builders, LLC, Mediterrtanean Villas, Pasco,WA

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2010-12-01

    Devoted Builders of Kennewick, WA worked with Building America's BIRA team to achieve the 50% Federal tax credit level energy savings on 81 homes at its Mediterranean Villas community in eastern Washington.

  1. Lost in translation? A multilingual Query Builder improves the quality of PubMed queries: a randomised controlled trial.

    PubMed

    Schuers, Matthieu; Joulakian, Mher; Kerdelhué, Gaetan; Segas, Léa; Grosjean, Julien; Darmoni, Stéfan J; Griffon, Nicolas

    2017-07-03

    MEDLINE is the most widely used medical bibliographic database in the world. Most of its citations are in English and this can be an obstacle for some researchers to access the information the database contains. We created a multilingual query builder to facilitate access to the PubMed subset using a language other than English. The aim of our study was to assess the impact of this multilingual query builder on the quality of PubMed queries for non-native English speaking physicians and medical researchers. A randomised controlled study was conducted among French speaking general practice residents. We designed a multi-lingual query builder to facilitate information retrieval, based on available MeSH translations and providing users with both an interface and a controlled vocabulary in their own language. Participating residents were randomly allocated either the French or the English version of the query builder. They were asked to translate 12 short medical questions into MeSH queries. The main outcome was the quality of the query. Two librarians blind to the arm independently evaluated each query, using a modified published classification that differentiated eight types of errors. Twenty residents used the French version of the query builder and 22 used the English version. 492 queries were analysed. There were significantly more perfect queries in the French group vs. the English group (respectively 37.9% vs. 17.9%; p < 0.01). It took significantly more time for the members of the English group than the members of the French group to build each query, respectively 194 sec vs. 128 sec; p < 0.01. This multi-lingual query builder is an effective tool to improve the quality of PubMed queries in particular for researchers whose first language is not English.

  2. 49 CFR 179.220-25 - Stamping.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...: Material ASTM A240-316L. Shell thickness Shell 0.167 in. Head thickness Head 0.150 in. Tank builders initials ABC. Date of original test 00-0000. Outer shell: Material ASTM A285-C. Tank builders initials WYZ...

  3. DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    This builder certified its first DOE Zero Energy Ready Home and won a Production Builder honor in the 2014 Housing Innovation Awards. It is the first home in the world to use a tri-generation system to supply electricity, heating, and cooling on site.

  4. 6. BUILDER'S PLATE ON WEST TRUSS: 'MOSELEY IRON BUILDING WORKS, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. BUILDER'S PLATE ON WEST TRUSS: 'MOSELEY IRON BUILDING WORKS, BOSTON 1888, PATENTED 1881 TO T.W.E. MOSELEY' - Upper Pacific Mills Bridge, Moved to Merrimack College, North Andover, MA, Lawrence, Essex County, MA

  5. DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    ?Ducts in conditioned space (DCS) represent a high priority measure for moving the next generation of new homes to the Zero Net Energy performance level. Various strategies exist for incorporating ducts within the conditioned thermal envelope. To support this activity, in 2013 the Pacific Gas & Electric Company initiated a project with Davis Energy Group (lead for the Building America team, Alliance for Residential Building Innovation) to solicit builder involvement in California to participate in field demonstrations of various DCS strategies. Builders were given incentives and design support in exchange for providing site access for construction observation, diagnostic testing, andmore » builder survey feedback. Information from the project was designed to feed into California's 2016 Title 24 process, but also to serve as an initial mechanism to engage builders in more high performance construction strategies. This Building America project complemented information collected in the California project with BEopt simulations of DCS performance in hot/dry climate regions.« less

  6. Building America Best Practices Series Volume 12: Builders Challenge Guide to 40% Whole-House Energy Savings in the Cold and Very Cold Climates

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.

    2011-02-01

    This best practices guide is the twelfth in a series of guides for builders produced by PNNL for the U.S. Department of Energy’s Building America program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the cold and very cold climates can build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers. Themore » best practices described in this document are based on the results of research and demonstration projects conducted by Building America’s research teams. Building America brings together the nation’s leading building scientists with over 300 production builders to develop, test, and apply innovative, energy-efficient construction practices. Building America builders have found they can build homes that meet these aggressive energy-efficiency goals at no net increased costs to the homeowners. Currently, Building America homes achieve energy savings of 40% greater than the Building America benchmark home (a home built to mid-1990s building practices roughly equivalent to the 1993 Model Energy Code). The recommendations in this document meet or exceed the requirements of the 2009 IECC and 2009 IRC and thos erequirements are highlighted in the text. This document will be distributed via the DOE Building America website: www.buildingamerica.gov.« less

  7. 18. Castiron bridge plate citing builder, date, and names of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. Cast-iron bridge plate citing builder, date, and names of bridge committee members. Jack Boucher, photographer, 1977 - Neshanic Station Lenticular Truss Bridge, State Route 567, spanning South Branch of Raritan River, Neshanic Station, Somerset County, NJ

  8. JOB BUILDER remote batch processing subsystem

    NASA Technical Reports Server (NTRS)

    Orlov, I. G.; Orlova, T. L.

    1980-01-01

    The functions of the JOB BUILDER remote batch processing subsystem are described. Instructions are given for using it as a component of a display system developed by personnel of the System Programming Laboratory, Institute of Space Research, USSR Academy of Sciences.

  9. BRIDGE BUILDER WILLIAM FLINN’S “CAMP & BRIDGE BUILDING OUTFIT”. INTERIOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BRIDGE BUILDER WILLIAM FLINN’S “CAMP & BRIDGE BUILDING OUTFIT”. INTERIOR VIEW SHOWING LABORERS AT MEAL TIME. - Clear Fork of Brazos River Suspension Bridge, Spanning Clear Fork of Brazos River at County Route 179, Albany, Shackelford County, TX

  10. DETAIL OF CORNERSTONE, WHICH STATES "J.J. DANIELS, BUILDER 1861." NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF CORNERSTONE, WHICH STATES "J.J. DANIELS, BUILDER 1861." NOTE ALSO IRON STRAP AT EAST CORNER OF ABUTMENT. - Jackson Covered Bridge, Spanning Sugar Creek, CR 775N (Changed from Spanning Sugar Creek), Bloomingdale, Parke County, IN

  11. Polyol and Amino Acid-Based Biosurfactants, Builders, and Hydrogels

    USDA-ARS?s Scientific Manuscript database

    This chapter reviews different detergent materials which have been synthesized from natural agricultural commodities. Background information, which gives reasons why the use of biobased materials may be advantageous, is presented. Detergent builders from L-aspartic acid, citric acid and D-sorbitol...

  12. High Performance Builder Spotlight: Treasure Homes Inc.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2011-01-01

    Treasure Homes, Inc., achieved a HERS rating of 46 without PV on its prototype “Gem” home, located on the shores of Lake Michigan in northern Indiana, thanks in part to training received from a Building America partner, the National Association of Home Builders Research Center.

  13. 49 CFR 230.47 - Boiler number.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Steam Gauges § 230.47 Boiler number. (a) Generally. The builder's number of the boiler, if known, shall be stamped on the steam dome or manhole flange. If the builder's number cannot be obtained, an...

  14. Conditioning of sewage sludge by Fenton's reagent combined with skeleton builders.

    PubMed

    Liu, Huan; Yang, Jiakuan; Shi, Yafei; Li, Ye; He, Shu; Yang, Changzhu; Yao, Hong

    2012-06-01

    Physical conditioners, often known as skeleton builders, are commonly used to improve the dewaterability of sewage sludge. This study evaluated a novel joint usage of Fenton's reagent and skeleton builders, referred to as the F-S inorganic composite conditioner, focusing on their efficacies and the optimization of the major operational parameters. The results demonstrate that the F-S composite conditioner for conditioning sewage sludge is a viable alternative to conventional organic polymers, especially when ordinary Portland cement (OPC) and lime are used as the skeleton builders. Experimental investigations confirmed that Fenton reaction required sufficient time (80 min in this study) to degrade organics in the sludge. The optimal condition of this process was at pH=5, Fe(2+)=40 mg g(-1) (dry solids), H(2)O(2)=32 mg g(-1), OPC=300 mg g(-1) and lime=400 mg g(-1), in which the specific resistance to filtration reduction efficiency of 95% was achieved. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. TrustBuilder2: A Reconfigurable Framework for Trust Negotiation

    NASA Astrophysics Data System (ADS)

    Lee, Adam J.; Winslett, Marianne; Perano, Kenneth J.

    To date, research in trust negotiation has focused mainly on the theoretical aspects of the trust negotiation process, and the development of proof of concept implementations. These theoretical works and proofs of concept have been quite successful from a research perspective, and thus researchers must now begin to address the systems constraints that act as barriers to the deployment of these systems. To this end, we present TrustBuilder2, a fully-configurable and extensible framework for prototyping and evaluating trust negotiation systems. TrustBuilder2 leverages a plug-in based architecture, extensible data type hierarchy, and flexible communication protocol to provide a framework within which numerous trust negotiation protocols and system configurations can be quantitatively analyzed. In this paper, we discuss the design and implementation of TrustBuilder2, study its performance, examine the costs associated with flexible authorization systems, and leverage this knowledge to identify potential topics for future research, as well as a novel method for attacking trust negotiation systems.

  16. Technology Solutions Case Study: High-Performance Ducts in Hot-Dry Climates

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    M. Hoeschele, A. German, E. Weitzel, R. Chitwood

    2015-08-01

    Ducts in conditioned space (DCS) represent a high priority measure for moving the next generation of new homes to the Zero Net Energy performance level. Various strategies exist for incorporating ducts within the conditioned thermal envelope. To support this activity, in 2013 the Pacific Gas & Electric Company initiated a project with Davis Energy Group (lead for the Building America team, Alliance for Residential Building Innovation) to solicit builder involvement in California to participate in field demonstrations of various DCS strategies. Builders were given incentives and design support in exchange for providing site access for construction observation, diagnostic testing, andmore » builder survey feedback. Information from the project was designed to feed into California's 2016 Title 24 process, but also to serve as an initial mechanism to engage builders in more high performance construction strategies. This Building America project complemented information collected in the California project with BEopt simulations of DCS performance in hot/dry climate regions.« less

  17. Appliance energy efficiency in new home construction

    NASA Astrophysics Data System (ADS)

    1980-11-01

    A survey of 224 builders was conducted to which 160 builders responded. Each respondent completed between one and seven separate questionnaires. Each of the seven questionnaires were designed to collect information about one type of equipment or major appliance. These are: heat pump; heating system; air conditioner; domestic water heater; dishwasher; range; and refrigerator. Analyses of the resulting 406 questionnaires indicated that builders were primarily responsible for brand selection. These choices were made primarily without regard for the secondary efficiency of the product. A similar apparent lack of consideration of energy efficiency during brand and model selection was found among home buyers and specialized subcontractors.

  18. Intelligent Support System of Steel Technical Preparation in an Arc Furnace: Functional Scheme of Interactive Builder of the Multi Objective Optimization Problem

    NASA Astrophysics Data System (ADS)

    Logunova, O. S.; Sibileva, N. S.

    2017-12-01

    The purpose of the study is to increase the efficiency of the steelmaking process in large capacity arc furnace on the basis of implementation a new decision-making system about the composition of charge materials. The authors proposed an interactive builder for the formation of the optimization problem, taking into account the requirements of the customer, normative documents and stocks of charge materials in the warehouse. To implement the interactive builder, the sets of deterministic and stochastic model components are developed, as well as a list of preferences of criteria and constraints.

  19. NREL: News - 15 Home Builders Earn Energyvalue Awards

    Science.gov Websites

    builders who voluntarily integrate energy and resource efficiency into the design, construction and successful approaches to resource-efficient construction. The 2002 EVHA winners are: Tierra Concrete Homes , Sioux City, IA Artistic Homes, Albuquerque, NM Chuck Miller Construction, Hidden Springs ID Enviro

  20. New Whole-House Solutions Case Study: John Wesley Miller, Tucson, Arizona

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    This builder worked with the National Association of Home Builders Research Center to build two net-zero energy homes with foam-sheathed masonry walls, low-E windows 2.9 ACH50 air sealing, transfer grilles, ducts in insulated attic, PV, and solar water heating.

  1. Building Green the Right Way

    ERIC Educational Resources Information Center

    Lewis, C. Deana

    2009-01-01

    As the workforce development arm of the National Association of Home Builders (NAHB), and cluster leader for the Architecture and Construction career cluster, Home Builders Institute (HBI) has a vested interest in keeping America's elementary, middle and high school students excited and knowledgeable about what's new in residential construction.…

  2. Operationalizing Special Operations Aviation in Indonesia

    DTIC Science & Technology

    2006-12-15

    special operations forces Builder: Lockheed Power Plant: Four Allison T56 -A-15 turboprop engines Thrust: 4,910 shaft horsepower each engine...Builder: Lockheed Power Plant: Four Allison T56 -A-15 turboprop engines Thrust: 4,910 shaft horsepower each engine Length: 98 feet, 9 inches (30.09

  3. Analysis of Navy Flight Scheduling Methods Using FlyAwake

    DTIC Science & Technology

    2009-09-01

    28 Figure 4. FlyAwake Schedule Builder Screenshot..........................................................28...Figure 5. FlyAwake Work Schedule Builder Screenshot................................................29 Figure 6. FlyAwake Graphical Output Screenshot... disqualifies crewmembers from participating in the following day’s flight operations. These rules are subject to operational requirements and deviation

  4. Building America

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brad Oberg

    2010-12-31

    Builders generally use a 'spec and purchase' business management system (BMS) when implementing energy efficiency. A BMS is the overall operational and organizational systems and strategies that a builder uses to set up and run its company. This type of BMS treats building performance as a simple technology swap (e.g. a tank water heater to a tankless water heater) and typically compartmentalizes energy efficiency within one or two groups in the organization (e.g. purchasing and construction). While certain tools, such as details, checklists, and scopes of work, can assist builders in managing the quality of the construction of higher performancemore » homes, they do nothing to address the underlying operational strategies and issues related to change management that builders face when they make high performance homes a core part of their mission. To achieve the systems integration necessary for attaining 40% + levels of energy efficiency, while capturing the cost tradeoffs, builders must use a 'systems approach' BMS, rather than a 'spec and purchase' BMS. The following attributes are inherent in a systems approach BMS; they are also generally seen in quality management systems (QMS), such as the National Housing Quality Certification program: Cultural and corporate alignment, Clear intent for quality and performance, Increased collaboration across internal and external teams, Better communication practices and systems, Disciplined approach to quality control, Measurement and verification of performance, Continuous feedback and improvement, and Whole house integrated design and specification.« less

  5. SDMProjectBuilder: SWAT Setup for Nutrient Fate and Transport

    EPA Science Inventory

    This tutorial reviews some of the screens, icons, and basic functions of the SDMProjectBuilder (SDMPB) and explains how one uses SDMPB output to populate the Soil and Water Assessment Tool (SWAT) input files for nutrient fate and transport modeling in the Salt River Basin. It dem...

  6. Antiterrorism Measures For Historic Properties

    DTIC Science & Technology

    2006-09-01

    steel jacket on an existing concrete column (Morley Builders 1997...of the material. Figure 17. Seismic application of a steel jacket on an existing concrete column (Morley Builders 1997). Columns — Reinforced...from a previously unreinforced structure, so future irreversibility of the technique need not disqualify it from consideration by project teams. ERDC

  7. Counselors as Esteem Builders.

    ERIC Educational Resources Information Center

    Santa Rita, Emilio, Jr.

    This paper contains an instrument for evaluating college counselors as esteem-builders, using Borba's Analysis of Self-Esteem. The instrument is divided into five components, each of which should be fostered in a student by the counselor: (1) Security, a feeling of strong assuredness; (2) Selfhood, a feeling of individuality; (3) Affiliation, a…

  8. 49 CFR 230.47 - Boiler number.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Boiler number. 230.47 Section 230.47... Steam Gauges § 230.47 Boiler number. (a) Generally. The builder's number of the boiler, if known, shall be stamped on the steam dome or manhole flange. If the builder's number cannot be obtained, an...

  9. 49 CFR 230.47 - Boiler number.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Boiler number. 230.47 Section 230.47... Steam Gauges § 230.47 Boiler number. (a) Generally. The builder's number of the boiler, if known, shall be stamped on the steam dome or manhole flange. If the builder's number cannot be obtained, an...

  10. 49 CFR 230.47 - Boiler number.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Boiler number. 230.47 Section 230.47... Steam Gauges § 230.47 Boiler number. (a) Generally. The builder's number of the boiler, if known, shall be stamped on the steam dome or manhole flange. If the builder's number cannot be obtained, an...

  11. 49 CFR 230.47 - Boiler number.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Boiler number. 230.47 Section 230.47... Steam Gauges § 230.47 Boiler number. (a) Generally. The builder's number of the boiler, if known, shall be stamped on the steam dome or manhole flange. If the builder's number cannot be obtained, an...

  12. 13 CFR 120.392 - Who may apply?

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 13 Business Credit and Assistance 1 2012-01-01 2012-01-01 false Who may apply? 120.392 Section 120.392 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Builders Loan Program § 120.392 Who may apply? A construction contractor or home-builder with a past...

  13. 13 CFR 120.392 - Who may apply?

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 13 Business Credit and Assistance 1 2013-01-01 2013-01-01 false Who may apply? 120.392 Section 120.392 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Builders Loan Program § 120.392 Who may apply? A construction contractor or home-builder with a past...

  14. 13 CFR 120.392 - Who may apply?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 13 Business Credit and Assistance 1 2014-01-01 2014-01-01 false Who may apply? 120.392 Section 120.392 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Builders Loan Program § 120.392 Who may apply? A construction contractor or home-builder with a past...

  15. 13 CFR 120.392 - Who may apply?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Who may apply? 120.392 Section 120.392 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Builders Loan Program § 120.392 Who may apply? A construction contractor or home-builder with a past...

  16. Industry Talks the Talk and Walks the Walk

    ERIC Educational Resources Information Center

    Lewis, C. Deanna

    2008-01-01

    Home Builders Institute (HBI), the workforce development arm of the National Association of Home Builders (NAHB), is dedicated to the advancement and enrichment of education and training programs serving the needs of the building industry. For more than 30 years, HBI has trained skilled workers in residential construction, promoted the industry as…

  17. The Columbia-Willamette Skill Builders Consortium. Final Performance Report.

    ERIC Educational Resources Information Center

    Portland Community Coll., OR.

    The Columbia-Willamette Skill Builders Consortium was formed in early 1988 in response to a growing awareness of the need for improved workplace literacy training and coordinated service delivery in Northwest Oregon. In June 1990, the consortium received a National Workplace Literacy Program grant to develop and demonstrate such training. The…

  18. 13 CFR 120.391 - What is the Builders Loan Program?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What is the Builders Loan Program? 120.391 Section 120.391 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS...)(9) of the Act, SBA may make or guarantee loans to finance small general contractors to construct or...

  19. 13 CFR 120.391 - What is the Builders Loan Program?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 13 Business Credit and Assistance 1 2014-01-01 2014-01-01 false What is the Builders Loan Program? 120.391 Section 120.391 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS...)(9) of the Act, SBA may make or guarantee loans to finance small general contractors to construct or...

  20. 13 CFR 120.391 - What is the Builders Loan Program?

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 13 Business Credit and Assistance 1 2012-01-01 2012-01-01 false What is the Builders Loan Program? 120.391 Section 120.391 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS...)(9) of the Act, SBA may make or guarantee loans to finance small general contractors to construct or...

  1. 13 CFR 120.391 - What is the Builders Loan Program?

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 13 Business Credit and Assistance 1 2013-01-01 2013-01-01 false What is the Builders Loan Program? 120.391 Section 120.391 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS...)(9) of the Act, SBA may make or guarantee loans to finance small general contractors to construct or...

  2. DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    The home that won a Production Builder award in the 2014 Housing Innovation Awards serves as a model for this builder, showcasing high-tech features including an electric car charging station; a compressed natural gas (CNG) car fueling station; a greywater recycling system that filters shower, sink, and clothes washer water for yard irrigation; smart appliances; and an electronic energy management system.

  3. Captivate MenuBuilder: Creating an Online Tutorial for Teaching Software

    ERIC Educational Resources Information Center

    Yelinek, Kathryn; Tarnowski, Lynn; Hannon, Patricia; Oliver, Susan

    2008-01-01

    In this article, the authors, students in an instructional technology graduate course, describe a process to create an online tutorial for teaching software. They created the tutorial for a cyber school's use. Five tutorial modules were linked together through one menu screen using the MenuBuilder feature in the Adobe Captivate program. The…

  4. E-Classical Fairy Tales: Multimedia Builder as a Tool

    ERIC Educational Resources Information Center

    Eteokleous, Nikleia; Ktoridou, Despo; Tsolakidis, Symeon

    2011-01-01

    The study examines pre-service teachers' experiences in delivering a traditional-classical fairy tale using the Multimedia Builder software, in other words an e-fairy tale. A case study approach was employed, collecting qualitative data through classroom observations and focus groups. The results focus on pre-service teachers' reactions, opinions,…

  5. 46 CFR 69.105 - Application for measurement services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) Type of vessel. (b) Vessel's name and official number (if assigned). (c) Builder's name and the vessel hull number assigned by the builder. (d) Place and year built. (e) Date keel was laid. (f) Overall length, breadth, and depth of vessel. (g) Lines plan. (h) Booklet of offsets. (i) Capacity plans for...

  6. 46 CFR 69.105 - Application for measurement services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) Type of vessel. (b) Vessel's name and official number (if assigned). (c) Builder's name and the vessel hull number assigned by the builder. (d) Place and year built. (e) Date keel was laid. (f) Overall length, breadth, and depth of vessel. (g) Lines plan. (h) Booklet of offsets. (i) Capacity plans for...

  7. 46 CFR 69.105 - Application for measurement services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...) Type of vessel. (b) Vessel's name and official number (if assigned). (c) Builder's name and the vessel hull number assigned by the builder. (d) Place and year built. (e) Date keel was laid. (f) Overall length, breadth, and depth of vessel. (g) Lines plan. (h) Booklet of offsets. (i) Capacity plans for...

  8. 46 CFR 69.105 - Application for measurement services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...) Type of vessel. (b) Vessel's name and official number (if assigned). (c) Builder's name and the vessel hull number assigned by the builder. (d) Place and year built. (e) Date keel was laid. (f) Overall length, breadth, and depth of vessel. (g) Lines plan. (h) Booklet of offsets. (i) Capacity plans for...

  9. 46 CFR 69.105 - Application for measurement services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) Type of vessel. (b) Vessel's name and official number (if assigned). (c) Builder's name and the vessel hull number assigned by the builder. (d) Place and year built. (e) Date keel was laid. (f) Overall length, breadth, and depth of vessel. (g) Lines plan. (h) Booklet of offsets. (i) Capacity plans for...

  10. 13 CFR 120.391 - What is the Builders Loan Program?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false What is the Builders Loan Program? 120.391 Section 120.391 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS...)(9) of the Act, SBA may make or guarantee loans to finance small general contractors to construct or...

  11. Building America Best Practices Series Volume 11. Builders Challenge Guide to 40% Whole-House Energy Savings in the Marine Climate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.

    2010-09-01

    This best practices guide is the eleventh in a series of guides for builders produced by the U.S. Department of Energy’s Building America Program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the marine climate (portions of Washington, Oregon, and California) can achieve homes that have whole house energy savings of 40% over the Building America benchmark (a home built to mid-1990s buildingmore » practices roughly equivalent to the 1993 Model Energy Code) with no added overall costs for consumers. These best practices are based on the results of research and demonstration projects conducted by Building America’s research teams. The guide includes information for managers, designers, marketers, site supervisors, and subcontractors, as well as case studies of builders who are successfully building homes that cut energy use by 40% in the marine climate. This document is available on the web at www.buildingamerica.gov. This report was originally cleared 06-29-2010. This version is Rev 1 cleared in Nov 2010. The only change is the reference to the Energy Star Windows critieria shown on pg 8.25 was updated to match the criteria - Version 5.0, 04/07/2009, effective 01/04/2010.« less

  12. Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kerrigan, P.

    2014-03-01

    BSC worked directly with the David Weekley Homes - Houston division to redesign three floor plans in order to locate the HVAC system in conditioned space. The purpose of this project is to develop a cost effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses. This is in preparation for the upcoming code changes in 2015. The builder wishes to develop an upgrade package that will allow for a seamless transition to the new code mandate. The followingmore » research questions were addressed by this research project: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost? BSC and the builder developed a duct design strategy that employs a system of dropped ceilings and attic coffers for moving the ductwork from the vented attic to conditioned space. The furnace has been moved to either a mechanical closet in the conditioned living space or a coffered space in the attic.« less

  13. Carbonate Production by Benthic Communities on Shallow Coralgal Reefs of Abrolhos Bank, Brazil.

    PubMed

    Reis, Vanessa Moura Dos; Karez, Cláudia Santiago; Mariath, Rodrigo; de Moraes, Fernando Coreixas; de Carvalho, Rodrigo Tomazetto; Brasileiro, Poliana Silva; Bahia, Ricardo da Gama; Lotufo, Tito Monteiro da Cruz; Ramalho, Laís Vieira; de Moura, Rodrigo Leão; Francini-Filho, Ronaldo Bastos; Pereira-Filho, Guilherme Henrique; Thompson, Fabiano Lopes; Bastos, Alex Cardoso; Salgado, Leonardo Tavares; Amado-Filho, Gilberto Menezes

    2016-01-01

    The abundance of reef builders, non-builders and the calcium carbonate produced by communities established in Calcification Accretion Units (CAUs) were determined in three Abrolhos Bank shallow reefs during the period from 2012 to 2014. In addition, the seawater temperature, the irradiance, and the amount and composition of the sediments were determined. The inner and outer reef arcs were compared. CAUs located on the inner reef shelf were under the influence of terrigenous sediments. On the outer reefs, the sediments were composed primarily of marine biogenic carbonates. The mean carbonate production in shallow reefs of Abrolhos was 579 ± 98 g m-2 y-1. The builder community was dominated by crustose coralline algae, while the non-builder community was dominated by turf. A marine heat wave was detected during the summer of 2013-2014, and the number of consecutive days with a temperature above or below the summer mean was positively correlated with the turf cover increase. The mean carbonate production of the shallow reefs of Abrolhos Bank was greater than the estimated carbonate production measured for artificial structures on several other shallow reefs of the world. The calcimass was higher than the non-calcareous mass, suggesting that the Abrolhos reefs are still in a positive carbonate production balance. Given that marine heat waves produce an increase of turf cover on the shallow reefs of the Abrolhos, a decrease in the cover represented by reef builders and shifting carbonate production are expected in the near future.

  14. HVAC Design Strategy for a Hot-Humid Production Builder, Houston, Texas (Fact Sheet)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None, None

    BSC worked directly with the David Weekley Homes - Houston division to redesign three floor plans in order to locate the HVAC system in conditioned space. The purpose of this project is to develop a cost effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses. This is in preparation for the upcoming code changes in 2015. The builder wishes to develop an upgrade package that will allow for a seamless transition to the new code mandate. The followingmore » research questions were addressed by this research project: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost? BSC and the builder developed a duct design strategy that employs a system of dropped ceilings and attic coffers for moving the ductwork from the vented attic to conditioned space. The furnace has been moved to either a mechanical closet in the conditioned living space or a coffered space in the attic.« less

  15. Carbonate Production by Benthic Communities on Shallow Coralgal Reefs of Abrolhos Bank, Brazil

    PubMed Central

    dos Reis, Vanessa Moura; Karez, Cláudia Santiago; Mariath, Rodrigo; de Moraes, Fernando Coreixas; de Carvalho, Rodrigo Tomazetto; Brasileiro, Poliana Silva; Bahia, Ricardo da Gama; Lotufo, Tito Monteiro da Cruz; Ramalho, Laís Vieira; de Moura, Rodrigo Leão; Francini-Filho, Ronaldo Bastos; Pereira-Filho, Guilherme Henrique; Thompson, Fabiano Lopes; Bastos, Alex Cardoso; Salgado, Leonardo Tavares; Amado-Filho, Gilberto Menezes

    2016-01-01

    The abundance of reef builders, non-builders and the calcium carbonate produced by communities established in Calcification Accretion Units (CAUs) were determined in three Abrolhos Bank shallow reefs during the period from 2012 to 2014. In addition, the seawater temperature, the irradiance, and the amount and composition of the sediments were determined. The inner and outer reef arcs were compared. CAUs located on the inner reef shelf were under the influence of terrigenous sediments. On the outer reefs, the sediments were composed primarily of marine biogenic carbonates. The mean carbonate production in shallow reefs of Abrolhos was 579 ± 98 g m-2 y-1. The builder community was dominated by crustose coralline algae, while the non-builder community was dominated by turf. A marine heat wave was detected during the summer of 2013–2014, and the number of consecutive days with a temperature above or below the summer mean was positively correlated with the turf cover increase. The mean carbonate production of the shallow reefs of Abrolhos Bank was greater than the estimated carbonate production measured for artificial structures on several other shallow reefs of the world. The calcimass was higher than the non-calcareous mass, suggesting that the Abrolhos reefs are still in a positive carbonate production balance. Given that marine heat waves produce an increase of turf cover on the shallow reefs of the Abrolhos, a decrease in the cover represented by reef builders and shifting carbonate production are expected in the near future. PMID:27119151

  16. Safe, Seen, and Celebrated with AHA! Peace Builders: Putting Youth in Charge of Change

    ERIC Educational Resources Information Center

    Freed, Jennifer; Lowenstein, Melissa

    2017-01-01

    Since 2013, AHA! (Attitude. Harmony. Achievement) has trained over 300 AHA! Peace Builder youth at six area schools in Santa Barbara, California. These young people have conducted outreach to more than 5,000 additional peers, family members, and community members via Connection Circles, which they led during class, between classes, at AHA! Peace…

  17. Fast data acquisition with the CDF event builder

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sinervo, P.K.; Ragan, K.J.; Booth, A.W.

    1989-02-01

    The CDF (Collider Detector at Fermilab) Event Builder is an intelligent Fastbus device that performs parallel read out of a set of Fastbus slaves on multiple cable segments, formats the data, and writes the reformatted data to a Fastbus slave module. The authors review the properties of this device, and summarize its performance in the CDF data acquisition system.

  18. 77 FR 47861 - Notice of Submission of Proposed Information Collection to OMB Hispanic-Serving Institutions...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-10

    ... construction properties as required by homebuyers or determined by the builder use the information collection. The lender reviews the changes and amends the approved exhibits. These changes ma affect the value shown on the DUD commitment. HUD requires the builder to use form HUD-92577 to request changes for...

  19. 77 FR 42258 - Notice of Funding Availability (NOFA) of Applications for Section 514 Farm Labor Housing Loans...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-18

    ... Home Builders (NAHB) ICC 700-2008 National Green Building Standard TM: http://www.nahb.org . --Bronze...://www1.eere.energy.gov/builders/challenge/ and Participation in local green/energy efficient building..., Green Communities, LEED for Homes or NAHB's National Green Building Standard (ICC-700) 2008, receive at...

  20. DOE Zero Energy Ready Home Case Study: Cobblestone Homes — 2014 Model Home, Midland, MI

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    2014-09-01

    This builder's first DOE Zero Energy Ready Home won a Custom Builder award in the 2014 Housing Innovation Awards, scored HERS 49 without PV or HERS 44 with 1.4 kW of PV, and served as a prototype and energy efficiency demonstration model while performance testing was conducted.

  1. Children's E-Book Technology: Devices, Books, and Book Builder

    ERIC Educational Resources Information Center

    Shiratuddin, Norshuhada; Landoni, Monica

    2003-01-01

    This article describes a study of children's electronic books (e-books) technology. In particular, the focus is on devices used to access children's e-books, current available e-books and an e-book builder specifically for children. Three small case studies were conducted: two to evaluate how children accept the devices and one to test the ease of…

  2. Quantitative Microbial Risk Assessment Tutorial - SDMProjectBuilder: Import Local Data Files to Identify and Modify Contamination Sources and Input ParametersUpdated 2017

    EPA Science Inventory

    Twelve example local data support files are automatically downloaded when the SDMProjectBuilder is installed on a computer. They allow the user to modify values to parameters that impact the release, migration, fate, and transport of microbes within a watershed, and control delin...

  3. Quantitative Microbial Risk Assessment Tutorial – SDMProjectBuilder: Import Local Data Files to Identify and Modify Contamination Sources and Input Parameters

    EPA Science Inventory

    Twelve example local data support files are automatically downloaded when the SDMProjectBuilder is installed on a computer. They allow the user to modify values to parameters that impact the release, migration, fate, and transport of microbes within a watershed, and control delin...

  4. Market segmentation and analysis of Japan's residential post and beam construction market.

    Treesearch

    Joseph A. Roos; Ivan L. Eastin; Hisaaki Matsuguma

    2005-01-01

    A mail survey of Japanese post and beam builders was conducted to measure their level of ethnocentrism, market orientation, risk aversion, and price consciousness. The data were analyzed utilizing factor and cluster analysis. The results showed that Japanese post and beam builders can be divided into three distinct market segments: open to import...

  5. Advanced Decentralized Water/Energy Network Design for Sustainable Infrastructure presentation at the 2012 National Association of Home Builders (NAHB) International Builders'Show

    EPA Science Inventory

    A university/industry panel will report on the progress and findings of a fivesteve-year project funded by the US Environmental Protection Agency. The project's end product will be a Web-based, 3D computer-simulated residential environment with a decision support system to assist...

  6. Builder 3 & 2. Naval Education and Training Command Rate Training Manual and Nonresident Career Course. Revised.

    ERIC Educational Resources Information Center

    Countryman, Gene L.

    This Rate Training Manual (Textbook) and Nonresident Career Course form a correspondence, self-study package to provide information related to tasks assigned to Builders Third and Second Class. Focus is on constructing, maintaining, and repairing wooden, concrete, and masonry structures, concrete pavement, and waterfront and underwater structures;…

  7. MLM Builder: An Integrated Suite for Development and Maintenance of Arden Syntax Medical Logic Modules

    PubMed Central

    Sailors, R. Matthew

    1997-01-01

    The Arden Syntax specification for sharable computerized medical knowledge bases has not been widely utilized in the medical informatics community because of a lack of tools for developing Arden Syntax knowledge bases (Medical Logic Modules). The MLM Builder is a Microsoft Windows-hosted CASE (Computer Aided Software Engineering) tool designed to aid in the development and maintenance of Arden Syntax Medical Logic Modules (MLMs). The MLM Builder consists of the MLM Writer (an MLM generation tool), OSCAR (an anagram of Object-oriented ARden Syntax Compiler), a test database, and the MLManager (an MLM management information system). Working together, these components form a self-contained, unified development environment for the creation, testing, and maintenance of Arden Syntax Medical Logic Modules.

  8. Modeling Code Is Helping Cleveland Develop New Products

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Master Builders, Inc., is a 350-person company in Cleveland, Ohio, that develops and markets specialty chemicals for the construction industry. Developing new products involves creating many potential samples and running numerous tests to characterize the samples' performance. Company engineers enlisted NASA's help to replace cumbersome physical testing with computer modeling of the samples' behavior. Since the NASA Lewis Research Center's Structures Division develops mathematical models and associated computation tools to analyze the deformation and failure of composite materials, its researchers began a two-phase effort to modify Lewis' Integrated Composite Analyzer (ICAN) software for Master Builders' use. Phase I has been completed, and Master Builders is pleased with the results. The company is now working to begin implementation of Phase II.

  9. Correction of gynecomastia in body builders and patients with good physique.

    PubMed

    Blau, Mordcai; Hazani, Ron

    2015-02-01

    Temporary gynecomastia in the form of breast buds is a common finding in young male subjects. In adults, permanent gynecomastia is an aesthetic impairment that may result in interest in surgical correction. Gynecomastia in body builders creates an even greater distress for patients seeking surgical treatment because of the demands of professional competition. The authors present their experience with gynecomastia in body builders as the largest study of such a group in the literature. Between the years 1980 and 2013, 1574 body builders were treated surgically for gynecomastia. Of those, 1073 were followed up for a period of 1 to 5 years. Ages ranged from 18 to 51 years. Subtotal excision in the form of subcutaneous mastectomy with removal of at least 95 percent of the glandular tissue was used in virtually all cases. In cases where body fat was extremely low, liposuction was performed in fewer than 2 percent of the cases. Aesthetically pleasing results were achieved in 98 percent of the cases based on the authors' patient satisfaction survey. The overall rate of hematomas was 9 percent in the first 15 years of the series and 3 percent in the final 15 years. There were no infections, contour deformities, or recurrences. This study demonstrates the importance of direct excision of the glandular tissue over any other surgical technique when correcting gynecomastia deformities in body builders. The novice surgeon is advised to proceed with cases that are less challenging, primarily with patients that require excision of small to medium glandular tissue. Therapeutic, IV.

  10. Space Fabrication Demonstration System

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The completion of assembly of the beam builder and its first automatic production of truss is discussed. A four bay, hand assembled, roll formed members truss was built and tested to ultimate load. Detail design of the fabrication facility (beam builder) was completed and designs for subsystem debugging are discussed. Many one bay truss specimens were produced to demonstrate subsystem operation and to detect problem areas.

  11. 75 FR 14487 - Requested Administrative Waiver of the Coastwise Trade Laws

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-25

    ... for the vessel CLOUD NINE. SUMMARY: As authorized by 46 U.S.C. 12121, the Secretary of Transportation... . Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in... have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in...

  12. Landscape Builder: software for the creation of initial landscapes for LANDIS from FIA data

    Treesearch

    William Dijak

    2013-01-01

    I developed Landscape Builder to create spatially explicit landscapes as starting conditions for LANDIS Pro 7.0 and LANDIS II landscape forest simulation models from classified satellite imagery and Forest Inventory and Analysis (FIA) data collected over multiple years. LANDIS Pro and LANDIS II models project future landscapes by simulating tree growth, tree species...

  13. DOE Zero Energy Ready Home Case Study: Alliance Green Builders, Casa Aguila

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pacific Northwest National Laboratory

    Alliance Green Builders built this 3,129-ft2 home in the hills above Ramona, California, to the high-performance criteria of the DOE Zero Energy Ready Home (ZERH) program. The home should perform far better than net zero thanks to a super-efficient building shell, a wind turbine, three suntracking solar photovoltaic arrays, and solar thermal water heating.

  14. Chemical Inventory Management at NASA Lewis Research Center

    NASA Technical Reports Server (NTRS)

    Kraft, Shirley S.; Homan, Joseph R.; Bajorek, Michael J.; Dominguez, Manuel B.; Smith, Vanessa L.

    1997-01-01

    The Chemical Management System (CMS) is a client/server application developed with Power Builder and Sybase for the Lewis Research Center (LeRC). Power Builder is a client-server application development tool, Sybase is a Relational Database Management System. The entire LeRC community can access the CMS from any desktop environment. The multiple functions and benefits of the CMS are addressed.

  15. ScholarshipBuilder Program, Second Annual Report 1989-1990. Report No. 10, Vol. 25.

    ERIC Educational Resources Information Center

    Ruffin, Minnie R.; And Others

    The ScholarshipBuilder Program, an adopt-a-class program, began in November 1988 to encourage selected first-grade students to stay in school until graduation in the year 2000. Scholarships will be provided by Merrill Lynch, Incorporated, for students who go on to college, and a one-time stipend will be provided to students who enter the military…

  16. 75 FR 34528 - Requested Administrative Waiver of the Coastwise Trade Laws

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-17

    ... comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S... effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will... vessel ERIC K is: Intended Commercial Use of Vessel: ``Charter and teaching trawler skills.'' Geographic...

  17. Software for Building Models of 3D Objects via the Internet

    NASA Technical Reports Server (NTRS)

    Schramer, Tim; Jensen, Jeff

    2003-01-01

    The Virtual EDF Builder (where EDF signifies Electronic Development Fixture) is a computer program that facilitates the use of the Internet for building and displaying digital models of three-dimensional (3D) objects that ordinarily comprise assemblies of solid models created previously by use of computer-aided-design (CAD) programs. The Virtual EDF Builder resides on a Unix-based server computer. It is used in conjunction with a commercially available Web-based plug-in viewer program that runs on a client computer. The Virtual EDF Builder acts as a translator between the viewer program and a database stored on the server. The translation function includes the provision of uniform resource locator (URL) links to other Web-based computer systems and databases. The Virtual EDF builder can be used in two ways: (1) If the client computer is Unix-based, then it can assemble a model locally; the computational load is transferred from the server to the client computer. (2) Alternatively, the server can be made to build the model, in which case the server bears the computational load and the results are downloaded to the client computer or workstation upon completion.

  18. Solving a real-world problem using an evolving heuristically driven schedule builder.

    PubMed

    Hart, E; Ross, P; Nelson, J

    1998-01-01

    This work addresses the real-life scheduling problem of a Scottish company that must produce daily schedules for the catching and transportation of large numbers of live chickens. The problem is complex and highly constrained. We show that it can be successfully solved by division into two subproblems and solving each using a separate genetic algorithm (GA). We address the problem of whether this produces locally optimal solutions and how to overcome this. We extend the traditional approach of evolving a "permutation + schedule builder" by concentrating on evolving the schedule builder itself. This results in a unique schedule builder being built for each daily scheduling problem, each individually tailored to deal with the particular features of that problem. This results in a robust, fast, and flexible system that can cope with most of the circumstances imaginable at the factory. We also compare the performance of a GA approach to several other evolutionary methods and show that population-based methods are superior to both hill-climbing and simulated annealing in the quality of solutions produced. Population-based methods also have the distinct advantage of producing multiple, equally fit solutions, which is of particular importance when considering the practical aspects of the problem.

  19. Coronary calcification in body builders using anabolic steroids.

    PubMed

    Santora, Lawrence J; Marin, Jairo; Vangrow, Jack; Minegar, Craig; Robinson, Mary; Mora, Janet; Friede, Gerald

    2006-01-01

    The authors measured coronary artery calcification as a means of examining the impact of anabolic steroids on the development of atherosclerotic disease in body builders using anabolic steroids over an extended period of time. Fourteen male professional body builders with no history of cardiovascular disease were evaluated for coronary artery calcium, serum lipids, left ventricular function, and exercise-induced myocardial ischemia. Seven subjects had coronary artery calcium, with a much higher than expected mean score of 98. Six of the 7 calcium scores were >90th percentile. Mean total cholesterol was 192 mg/dL, while mean high-density lipoprotein was 23 mg/dL and the mean ratio of total cholesterol to high-density lipoprotein was 8.3. Left ventricular ejection fraction ranged between 49% and 68%, with a mean of 59%. No subject had evidence of myocardial ischemia. This small group of professional body builders with a long history of steroid abuse had high levels of coronary artery calcium for age. The authors conclude that in this small pilot study there is an association between early coronary artery calcium and long-term steroid abuse. Large-scale studies are warranted to further explore this association.

  20. Citizens Utilities Company's successful residential new construction market transformation program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Caulfield, T.O.; Shepherd, M.A.

    1998-07-01

    Citizens Utilities Company, Arizona Electric Division (CUC/AED) fielded a Residential New Construction Program (RNC) in the forth quarter of 1994 that had been designed from conception as a market transformation program. The CUC RNC Program encouraged builders to adopt energy efficient building practices for new homes by supplying builders estimates of energy savings, supplying inspections services to assist builders in applying energy efficient building practices while verifying compliance, and posting and promoting the home as energy efficient during the sales period. Measures generally required to qualify for the program were R-38 ceiling insulation, R-21 wall insulation, polysealing of all infiltrationmore » gaps during construction, well sealed air-conditioning ducts, and an air conditioner Seasonal Energy Efficiency Rating (SEER) of 11.0 or greater. In less than two years the program achieved over 17% market penetration without offering rebates to builders. This paper reviews the design of the program, including a discussion of the features felt to be primarily responsible for its success. It reviews the levels of penetration achieved, free-ridership, spillover, and market barriers encountered. Finally it proposes improvements to the program designed to carry it the next step toward a self-sustaining market transformation program.« less

  1. 5. DETAIL OF BUILDER'S PLATE, WHICH READS '1898, THE SANITARY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. DETAIL OF BUILDER'S PLATE, WHICH READS '1898, THE SANITARY DISTRICT OF CHICAGO, BOARD OF TRUSTEES, WILLIAM BOLDENWECK, JOSEPH C. BRADEN, ZINA R. CARTER, BERNARD A. ECKART, ALEXANDER J. JONES, THOMAS KELLY, JAMES P. MALLETTE, THOMAS SMYTHE, FRANK WINTER; ISHAM RANDOLPH, CHIEF ENGINEER.' - Santa Fe Railroad, Sanitary & Ship Canal Bridge, Spanning Sanitary & Ship Canal east of Harlem Avenue, Chicago, Cook County, IL

  2. Car Builder: Design, Construct and Test Your Own Cars. School Version with Lesson Plans. [CD-ROM].

    ERIC Educational Resources Information Center

    Highsmith, Joni Bitman

    Car Builder is a scientific CD-ROM-based simulation program that lets students design, construct, modify, test, and compare their own cars. Students can design sedans, four-wheel-drive vehicles, vans, sport cars, and hot rods. They may select for aerodynamics, power, and racing ability, or economic and fuel efficiency. It is a program that teaches…

  3. The GlycanBuilder: a fast, intuitive and flexible software tool for building and displaying glycan structures.

    PubMed

    Ceroni, Alessio; Dell, Anne; Haslam, Stuart M

    2007-08-07

    Carbohydrates play a critical role in human diseases and their potential utility as biomarkers for pathological conditions is a major driver for characterization of the glycome. However, the additional complexity of glycans compared to proteins and nucleic acids has slowed the advancement of glycomics in comparison to genomics and proteomics. The branched nature of carbohydrates, the great diversity of their constituents and the numerous alternative symbolic notations, make the input and display of glycans not as straightforward as for example the amino-acid sequence of a protein. Every glycoinformatic tool providing a user interface would benefit from a fast, intuitive, appealing mechanism for input and output of glycan structures in a computer readable format. A software tool for building and displaying glycan structures using a chosen symbolic notation is described here. The "GlycanBuilder" uses an automatic rendering algorithm to draw the saccharide symbols and to place them on the drawing board. The information about the symbolic notation is derived from a configurable graphical model as a set of rules governing the aspect and placement of residues and linkages. The algorithm is able to represent a structure using only few traversals of the tree and is inherently fast. The tool uses an XML format for import and export of encoded structures. The rendering algorithm described here is able to produce high-quality representations of glycan structures in a chosen symbolic notation. The automated rendering process enables the "GlycanBuilder" to be used both as a user-independent component for displaying glycans and as an easy-to-use drawing tool. The "GlycanBuilder" can be integrated in web pages as a Java applet for the visual editing of glycans. The same component is available as a web service to render an encoded structure into a graphical format. Finally, the "GlycanBuilder" can be integrated into other applications to create intuitive and appealing user interfaces: an example is the "GlycoWorkbench", a software tool for assisted annotation of glycan mass spectra. The "GlycanBuilder" represent a flexible, reliable and efficient solution to the problem of input and output of glycan structures in any glycomic tool or database.

  4. nmsBuilder: Freeware to create subject-specific musculoskeletal models for OpenSim.

    PubMed

    Valente, Giordano; Crimi, Gianluigi; Vanella, Nicola; Schileo, Enrico; Taddei, Fulvia

    2017-12-01

    Musculoskeletal modeling and simulations of movement have been increasingly used in orthopedic and neurological scenarios, with increased attention to subject-specific applications. In general, musculoskeletal modeling applications have been facilitated by the development of dedicated software tools; however, subject-specific studies have been limited also by time-consuming modeling workflows and high skilled expertise required. In addition, no reference tools exist to standardize the process of musculoskeletal model creation and make it more efficient. Here we present a freely available software application, nmsBuilder 2.0, to create musculoskeletal models in the file format of OpenSim, a widely-used open-source platform for musculoskeletal modeling and simulation. nmsBuilder 2.0 is the result of a major refactoring of a previous implementation that moved a first step toward an efficient workflow for subject-specific model creation. nmsBuilder includes a graphical user interface that provides access to all functionalities, based on a framework for computer-aided medicine written in C++. The operations implemented can be used in a workflow to create OpenSim musculoskeletal models from 3D surfaces. A first step includes data processing to create supporting objects necessary to create models, e.g. surfaces, anatomical landmarks, reference systems; and a second step includes the creation of OpenSim objects, e.g. bodies, joints, muscles, and the corresponding model. We present a case study using nmsBuilder 2.0: the creation of an MRI-based musculoskeletal model of the lower limb. The model included four rigid bodies, five degrees of freedom and 43 musculotendon actuators, and was created from 3D surfaces of the segmented images of a healthy subject through the modeling workflow implemented in the software application. We have presented nmsBuilder 2.0 for the creation of musculoskeletal OpenSim models from image-based data, and made it freely available via nmsbuilder.org. This application provides an efficient workflow for model creation and helps standardize the process. We hope this would help promote personalized applications in musculoskeletal biomechanics, including larger sample size studies, and might also represent a basis for future developments for specific applications. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. WebDB Component Builder - Lessons Learned

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Macedo, C.

    2000-02-15

    Oracle WebDB is the easiest way to produce web enabled lightweight and enterprise-centric applications. This concept from Oracle has tantalized our taste for simplistic web development by using a purely web based tool that lives nowhere else but in the database. The use of online wizards, templates, and query builders, which produces PL/SQL behind the curtains, can be used straight ''out of the box'' by both novice and seasoned developers. The topic of this presentation will introduce lessons learned by developing and deploying applications built using the WebDB Component Builder in conjunction with custom PL/SQL code to empower a hybridmore » application. There are two kinds of WebDB components: those that display data to end users via reporting, and those that let end users update data in the database via entry forms. The presentation will also discuss various methods within the Component Builder to enhance the applications pushed to the desktop. The demonstrated example is an application entitled HOME (Helping Other's More Effectively) that was built to manage a yearly United Way Campaign effort. Our task was to build an end to end application which could manage approximately 900 non-profit agencies, an average of 4,100 individual contributions, and $1.2 million dollars. Using WebDB, the shell of the application was put together in a matter of a few weeks. However, we did encounter some hurdles that WebDB, in it's stage of infancy (v2.0), could not solve for us directly. Together with custom PL/SQL, WebDB's Component Builder became a powerful tool that enabled us to produce a very flexible hybrid application.« less

  6. Building America Best Practices Series Volume 15: 40% Whole-House Energy Savings in the Hot-Humid Climate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.

    2011-09-01

    This best practices guide is the 15th in a series of guides for builders produced by PNNL for the U.S. Department of Energy’s Building America program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the hot-humid climate can build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers. The best practices describedmore » in this document are based on the results of research and demonstration projects conducted by Building America’s research teams. Building America brings together the nation’s leading building scientists with over 300 production builders to develop, test, and apply innovative, energy-efficient construction practices. Building America builders have found they can build homes that meet these aggressive energy-efficiency goals at no net increased costs to the homeowners. Currently, Building America homes achieve energy savings of 40% greater than the Building America benchmark home (a home built to mid-1990s building practices roughly equivalent to the 1993 Model Energy Code). The recommendations in this document meet or exceed the requirements of the 2009 IECC and 2009 IRC and those requirements are highlighted in the text. Requirements of the 2012 IECC and 2012 IRC are also noted in text and tables throughout the guide. This document will be distributed via the DOE Building America website: www.buildingamerica.gov.« less

  7. Building America Best Practices Series Volume 16: 40% Whole-House Energy Savings in the Mixed-Humid Climate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.

    2011-09-01

    This best practices guide is the 16th in a series of guides for builders produced by PNNL for the U.S. Department of Energy’s Building America program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the mixed-humid climate can build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers. The best practices describedmore » in this document are based on the results of research and demonstration projects conducted by Building America’s research teams. Building America brings together the nation’s leading building scientists with over 300 production builders to develop, test, and apply innovative, energy-efficient construction practices. Building America builders have found they can build homes that meet these aggressive energy-efficiency goals at no net increased costs to the homeowners. Currently, Building America homes achieve energy savings of 40% greater than the Building America benchmark home (a home built to mid-1990s building practices roughly equivalent to the 1993 Model Energy Code). The recommendations in this document meet or exceed the requirements of the 2009 IECC and 2009 IRC and those requirements are highlighted in the text. Requirements of the 2012 IECC and 2012 IRC are also noted in text and tables throughout the guide. This document will be distributed via the DOE Building America website: www.buildingamerica.gov.« less

  8. GeneBuilder: interactive in silico prediction of gene structure.

    PubMed

    Milanesi, L; D'Angelo, D; Rogozin, I B

    1999-01-01

    Prediction of gene structure in newly sequenced DNA becomes very important in large genome sequencing projects. This problem is complicated due to the exon-intron structure of eukaryotic genes and because gene expression is regulated by many different short nucleotide domains. In order to be able to analyse the full gene structure in different organisms, it is necessary to combine information about potential functional signals (promoter region, splice sites, start and stop codons, 3' untranslated region) together with the statistical properties of coding sequences (coding potential), information about homologous proteins, ESTs and repeated elements. We have developed the GeneBuilder system which is based on prediction of functional signals and coding regions by different approaches in combination with similarity searches in proteins and EST databases. The potential gene structure models are obtained by using a dynamic programming method. The program permits the use of several parameters for gene structure prediction and refinement. During gene model construction, selecting different exon homology levels with a protein sequence selected from a list of homologous proteins can improve the accuracy of the gene structure prediction. In the case of low homology, GeneBuilder is still able to predict the gene structure. The GeneBuilder system has been tested by using the standard set (Burset and Guigo, Genomics, 34, 353-367, 1996) and the performances are: 0.89 sensitivity and 0.91 specificity at the nucleotide level. The total correlation coefficient is 0.88. The GeneBuilder system is implemented as a part of the WebGene a the URL: http://www.itba.mi. cnr.it/webgene and TRADAT (TRAncription Database and Analysis Tools) launcher URL: http://www.itba.mi.cnr.it/tradat.

  9. VQone MATLAB toolbox: A graphical experiment builder for image and video quality evaluations: VQone MATLAB toolbox.

    PubMed

    Nuutinen, Mikko; Virtanen, Toni; Rummukainen, Olli; Häkkinen, Jukka

    2016-03-01

    This article presents VQone, a graphical experiment builder, written as a MATLAB toolbox, developed for image and video quality ratings. VQone contains the main elements needed for the subjective image and video quality rating process. This includes building and conducting experiments and data analysis. All functions can be controlled through graphical user interfaces. The experiment builder includes many standardized image and video quality rating methods. Moreover, it enables the creation of new methods or modified versions from standard methods. VQone is distributed free of charge under the terms of the GNU general public license and allows code modifications to be made so that the program's functions can be adjusted according to a user's requirements. VQone is available for download from the project page (http://www.helsinki.fi/psychology/groups/visualcognition/).

  10. XAL Application Framework and Bricks GUI Builder

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pelaia II, Tom

    2007-01-01

    The XAL [1] Application Framework is a framework for rapidly developing document based Java applications with a common look and feel along with many built-in user interface behaviors. The Bricks GUI builder consists of a modern application and framework for rapidly building user interfaces in support of true Model-View-Controller (MVC) compliant Java applications. Bricks and the XAL Application Framework allow developers to rapidly create quality applications.

  11. Object Toolkit Version 4.3 User’s Manual

    DTIC Science & Technology

    2016-12-31

    unlimited. (OPS-17-12855 dtd 19 Jan 2017) 13. SUPPLEMENTARY NOTES 14. ABSTRACT Object Toolkit is a finite - element model builder specifically designed for...INTRODUCTION 1 What Is Object Toolkit? Object Toolkit is a finite - element model builder specifically designed for creating representations of spacecraft...Nascap-2k and EPIC, the user is not required to purchase or learn expensive finite element generators to create system models. Second, Object Toolkit

  12. 76 FR 75949 - Requested Administrative Waiver of the Coastwise Trade Laws: Vessel NAGA; Invitation for Public...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-05

    ... multi-day charters for up to 6 passengers with particular emphasis on bird watching, natural history and... may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD... of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S...

  13. Assessing Security Cooperation: Improving Methods to Maximize Effects

    DTIC Science & Technology

    2013-03-01

    Carl Builder notes, “Institutional and personal interest are not intrinsically bad; but they may be made so if they are always cloaked in altruism and...cooperation professional may be able to lay the groundwork for validating or disqualifying actions based on both countable metrics and anecdotal...Pre-decisional Working Draft), (Washington DC: Multi-Agency, July 31, 2012), 37. 6 Carl H. Builder , The Masks of War: American Military Styles in

  14. CHARMM-GUI Membrane Builder toward realistic biological membrane simulations.

    PubMed

    Wu, Emilia L; Cheng, Xi; Jo, Sunhwan; Rui, Huan; Song, Kevin C; Dávila-Contreras, Eder M; Qi, Yifei; Lee, Jumin; Monje-Galvan, Viviana; Venable, Richard M; Klauda, Jeffery B; Im, Wonpil

    2014-10-15

    CHARMM-GUI Membrane Builder, http://www.charmm-gui.org/input/membrane, is a web-based user interface designed to interactively build all-atom protein/membrane or membrane-only systems for molecular dynamics simulations through an automated optimized process. In this work, we describe the new features and major improvements in Membrane Builder that allow users to robustly build realistic biological membrane systems, including (1) addition of new lipid types, such as phosphoinositides, cardiolipin (CL), sphingolipids, bacterial lipids, and ergosterol, yielding more than 180 lipid types, (2) enhanced building procedure for lipid packing around protein, (3) reliable algorithm to detect lipid tail penetration to ring structures and protein surface, (4) distance-based algorithm for faster initial ion displacement, (5) CHARMM inputs for P21 image transformation, and (6) NAMD equilibration and production inputs. The robustness of these new features is illustrated by building and simulating a membrane model of the polar and septal regions of E. coli membrane, which contains five lipid types: CL lipids with two types of acyl chains and phosphatidylethanolamine lipids with three types of acyl chains. It is our hope that CHARMM-GUI Membrane Builder becomes a useful tool for simulation studies to better understand the structure and dynamics of proteins and lipids in realistic biological membrane environments. Copyright © 2014 Wiley Periodicals, Inc.

  15. Class in construction: London building workers, dirty work and physical cultures.

    PubMed

    Thiel, Darren

    2007-06-01

    Descriptions of manual employment tend to ignore its diversity and overstate the homogenizing effects of technology and industrialization. Based on ethnographic research on a London construction site, building work was found to be shaped by the forms of a pre-industrial work pattern characterized by task autonomy and freedom from managerial control. The builders' identities were largely free from personal identification as working class, and collective identification was fractured by trade status, and ethnic and gender divisions. Yet the shadow of a class-based discursive symbolism, which centered partly on the division of minds/bodies, mental/manual, and clean/dirty work, framed their accounts, identities and cultures. The builders displayed what is frequently termed working-class culture, and it was highly masculine. This physical and bodily-centered culture shielded them from the possible stigmatization of class and provided them with a source of localized capital. 'Physical capital' in conjunction with social capital (the builders' networks of friends and family) had largely guided their position in the stratification system, and values associated with these forms of capital were paramount to their public cultures. This cultural emphasis offered a continuing functionality in the builders' lives, not having broken free from tradition or becoming an object of reflexive choice.

  16. New Whole-House Solutions Case Study: HVAC Design Strategy for a Hot-Humid Production Builder, Houston, Texas

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    Building Science Corporation (BSC) worked directly with the David Weekley Homes - Houston division to develop a cost-effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses in preparation for the upcoming code changes in 2015. The following research questions were addressed by this research project: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story singlemore » family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost? BSC and the builder developed a duct design strategy that employs a system of dropped ceilings and attic coffers for moving the ductwork from the vented attic to conditioned space. The furnace has been moved to either a mechanical closet in the conditioned living space or a coffered space in the attic.« less

  17. Validation of bioelectrical impedance analysis to hydrostatic weighing in male body builders.

    PubMed

    Volpe, Stella Lucia; Melanson, Edward L; Kline, Gregory

    2010-03-01

    The purpose of this study was to compare bioelectrical impedance analysis (BIA) to hydrostatic weighing (HW) in male weight lifters and body builders. Twenty-two male body builders and weight lifters, 23 +/- 3 years of age (mean +/- SD), were studied to determine the efficacy of BIA to HW in this population. Subjects were measured on two separate occasions, 6 weeks apart, for test-retest reliability purposes. Participants recorded 3-day dietary intakes and average work-out times and regimens between the two testing periods. Subjects were, on average, 75 +/- 8 kg of body weight and 175 +/- 7 cm tall. Validation results were as follows: constant error for HW-BIA = 0.128 +/- 3.7%, r for HW versus BIA = -0.294. Standard error of the estimate for BIA = 2.32% and the total error for BIA = 3.6%. Percent body fat was 7.8 +/- 1% from BIA and 8.5 +/- 2% from HW (P > 0.05). Subjects consumed 3,217 +/- 1,027 kcals; 1,848 +/- 768 kcals from carbohydrates; 604 +/- 300 kcals from protein; and 783 +/- 369 kcals from fat. Although work-outs differed among one another, within subject training did not vary. These results suggest that measurement of percent body fat in male body builders and weight trainers is equally as accurate using BIA or HW.

  18. 40% Whole-House Energy Savings in the Hot-Humid Climate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    This guide book is a resource to help builders design and construct highly energy-efficient homes, while addressing building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the hot-humid climate can build homes that achieve whole house energy savings of 40% over the Building America benchmark (the 1993 Model Energy Code) with no added overall costs for consumers.

  19. 40% Whole-House Energy Savings in the Mixed-Humid Climate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Baechler, Michael C.; Gilbride, T. L.; Hefty, M. G.

    2011-09-01

    This guide book is a resource to help builders design and construct highly energy-efficient homes, while addressing building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the mixed-humid climate can build homes that achieve whole house energy savings of 40% over the Building America benchmark (the 1993 Model Energy Code) with no added overall costs for consumers.

  20. Adaptive Long-Term Monitoring at Environmental Restoration Sites (ER-0629)

    DTIC Science & Technology

    2009-05-01

    Figures Figure 2-1 General Flowchart of Software Application Figure 2-2 Overview of the Genetic Algorithm Approach Figure 2-3 Example of a...and Model Builder) are highlighted on Figure 2-1, which is a general flowchart illustrating the application of the software. The software is applied...monitoring event (e.g., contaminant mass based on interpolation) that modeling is provided by Model Builder. 4 Figure 2-1. General Flowchart of Software

  1. The Air Land Sea Bulletin. Issue No. 2008-2, May 2008

    DTIC Science & Technology

    2008-05-01

    during the meeting. We saw this as a key event because in Iraq the act of breaking bread together is a significant rapport builder and the first...meaning for both parties and were incredible rapport builders —more than that, they created brothers in arms. BUILDING RELATIONSHIPS Once you...possible. Primary disqualifiers for selection as an advisor are medical profiles/issues, lack of security clearances or inability to gain a clearance

  2. OpenSesame: an open-source, graphical experiment builder for the social sciences.

    PubMed

    Mathôt, Sebastiaan; Schreij, Daniel; Theeuwes, Jan

    2012-06-01

    In the present article, we introduce OpenSesame, a graphical experiment builder for the social sciences. OpenSesame is free, open-source, and cross-platform. It features a comprehensive and intuitive graphical user interface and supports Python scripting for complex tasks. Additional functionality, such as support for eyetrackers, input devices, and video playback, is available through plug-ins. OpenSesame can be used in combination with existing software for creating experiments.

  3. Preparation of Entangled Polymer Melts of Various Architecture for Coarse-Grained Models

    DTIC Science & Technology

    2011-09-01

    Simulator ( LAMMPS ). This report presents a theory overview and a manual how to use the method. 15. SUBJECT TERMS Ammunition, coarse-grained model...polymer builder, LAMMPS 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT UU 18. NUMBER OF PAGES 26 19a. NAME OF RESPONSIBLE PERSON...scale Atomic/Molecular Massively Parallel Simulator ( LAMMPS ). Gel is an in house written C program of coarse- grained polymer builder, and LAMMPS is

  4. Best Practices Case Study: Pulte Homes and Communities of Del Webb, Las Vegas Division

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2009-10-01

    Case study of Pulte Homes Las Vegas Division, who certified nearly 1,200 homes to the DOE Builders Challenge between 2008 and 2012. All of the homes by Las Vegas’ biggest builder achieved HERS scores of lower than 70, and many floor plans got down to the mid 50s, with ducts located in sealed attics insulated along the roof line, advanced framing, and extra attention to air sealing.

  5. The design and implementation of signal decomposition system of CL multi-wavelet transform based on DSP builder

    NASA Astrophysics Data System (ADS)

    Huang, Yan; Wang, Zhihui

    2015-12-01

    With the development of FPGA, DSP Builder is widely applied to design system-level algorithms. The algorithm of CL multi-wavelet is more advanced and effective than scalar wavelets in processing signal decomposition. Thus, a system of CL multi-wavelet based on DSP Builder is designed for the first time in this paper. The system mainly contains three parts: a pre-filtering subsystem, a one-level decomposition subsystem and a two-level decomposition subsystem. It can be converted into hardware language VHDL by the Signal Complier block that can be used in Quartus II. After analyzing the energy indicator, it shows that this system outperforms Daubenchies wavelet in signal decomposition. Furthermore, it has proved to be suitable for the implementation of signal fusion based on SoPC hardware, and it will become a solid foundation in this new field.

  6. Energy Value Housing Award Guide: How to Build and Profit with Energy Efficiency in New Home Construction

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sikora, J. L.

    2001-06-01

    As concern over the environment grows, builders have the potential to fulfill a market niche by building homes that use fewer resources and have lower environmental impact than conventional construction. Builders can increase their marketability and customer satisfaction and, at the same time, reduce the environmental impact of their homes. However, it takes dedication to build environmentally sound homes along with a solid marketing approach to ensure that customers recognize the added value of energy and resource efficiency. This guide is intended for builders seeking suggestions on how to improve energy and resource efficiency in their new homes. It ismore » a compilation of ideas and concepts for designing, building, and marketing energy- and resource-efficient homes based on the experience of recipients of the national Energy Value Housing Award (EVHA).« less

  7. Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kerrigan, P.

    2014-03-01

    Building Science Corporation (BSC) worked directly with the David Weekley Homes - Houston division to develop a cost-effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses in preparation for the upcoming code changes in 2015. This research project addressed the following questions: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences?more » 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost?« less

  8. Development and application of CATIA-GDML geometry builder

    NASA Astrophysics Data System (ADS)

    Belogurov, S.; Berchun, Yu; Chernogorov, A.; Malzacher, P.; Ovcharenko, E.; Schetinin, V.

    2014-06-01

    Due to conceptual difference between geometry descriptions in Computer-Aided Design (CAD) systems and particle transport Monte Carlo (MC) codes direct conversion of detector geometry in either direction is not feasible. The paper presents an update on functionality and application practice of the CATIA-GDML geometry builder first introduced at CHEP2010. This set of CATIAv5 tools has been developed for building a MC optimized GEANT4/ROOT compatible geometry based on the existing CAD model. The model can be exported via Geometry Description Markup Language (GDML). The builder allows also import and visualization of GEANT4/ROOT geometries in CATIA. The structure of a GDML file, including replicated volumes, volume assemblies and variables, is mapped into a part specification tree. A dedicated file template, a wide range of primitives, tools for measurement and implicit calculation of parameters, different types of multiple volume instantiation, mirroring, positioning and quality check have been implemented. Several use cases are discussed.

  9. Achieving Challenge Home in Affordable Housing in the Hot-Humid Climate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Beal, D.; McIlvaine, J.; Winter, B.

    2014-08-01

    The Building America Partnership for Improved Residential Construction (BA-PIRC), one of the Building America research team leads, has partnered with two builders as they work through the Challenge Home certification process in one test home each. The builder partners participating in this cost-shared research are Southeast Volusia County Habitat for Humanity near Daytona, Florida and Manatee County Habitat for Humanity near Tampa, Florida. Both are affiliates of Habitat for Humanity International, a non-profit affordable housing organization. This research serves to identify viable technical pathways to meeting the CH criteria for other builders in the region. A further objective of thismore » research is to identify gaps and barriers in the marketplace related to product availability, labor force capability, code issues, cost effectiveness, and business case issues that hinder or prevent broader adoption on a production scale.« less

  10. Achieving Challenge Home in Affordable Housing in the Hot-Humid Climate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Beal, D.; McIlvaine, J.; Winter, B.

    2014-08-01

    The Building America Partnership for Improved Residential Construction (BA-PIRC), one of the Building America research team leads, has partnered with two builders as they work through the Challenge Home certification process (now Zero Energy Ready Home) in one test home each. The builder partners participating in this cost-shared research are Southeast Volusia County Habitat for Humanity near Daytona, Florida and Manatee County Habitat for Humanity near Tampa, Florida. Both are affiliates of Habitat for Humanity International, a non-profit affordable housing organization. This research serves to identify viable technical pathways to meeting the CH criteria for other builders in the region.more » A further objective of this research is to identify gaps and barriers in the marketplace related to product availability, labor force capability, code issues, cost effectiveness, and business case issues that hinder or prevent broader adoption on a production scale.« less

  11. AgBufferBuilder: A geographic information system (GIS) tool for precision design and performance assessment of filter strips

    Treesearch

    M. G. Dosskey; S. Neelakantan; T. G. Mueller; T. Kellerman; M. J. Helmers; E. Rienzi

    2015-01-01

    Spatially nonuniform runoif reduces the water qua1iry perfortnance of constant- width filter strips. A geographic inlormation system (Gls)-based tool was developed and tested that ernploys terrain analysis to account lor spatially nonuniform runoffand produce more ellbctive filter strip designs.The computer program,AgBufTerBuilder, runs with ATcGIS versions 10.0 and 10...

  12. Transforming the U.S. Immigration System After 9/11: The Impact of Organizational Change and Collaboration in the Context of Homeland Security

    DTIC Science & Technology

    2008-12-01

    disqualifying criminal conviction from an application to become a Lawful Permanent Resident of the U.S.10 10...developing Collaborative Capacity Builders (CCBs) is another method to sustain and continue to build an effective USCIS and ICE network into the 21st...Weber and Anne M. Khademian, “Wicked Problems, Knowledge Challenges, and Collaborative Capacity Builders in Network Settings,” Public Administration

  13. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque, New Mexico

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    2013-09-01

    Palo Duro uses advanced framing techniques like 2x6 24-inch on-center framing, open headers above windows on non-load-bearing walls, 2-stud corners, ladder blocking where walls intersect, and single top and bottom plates. These techniques reduce the amount of lumber in the wall, allowing more room for insulation and reducing costs and installation time. The builder garnered a 2013 Housing Innovation Award in the production builder category.

  14. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Puttagunta, S.; Grab, J.; Williamson, J.

    Working with builder partners on test homes allows for vetting of whole-house building strategies to eliminate any potential unintended consequences prior to implementing these solution packages on a production scale. To support this research, CARB partnered with Preferred Builders Inc. on a high-performance test home in Old Greenwich, CT. The philosophy and science behind the 2,700 ft2 "Performance House" was based on the premise that homes should be safe, healthy, comfortable, durable, efficient, and adapt with the homeowners. The technologies and strategies used in the "Performance House" were not cutting-edge, but simply "best practices practiced". The focus was on simplicitymore » in construction, maintenance, and operation. When seeking a 30% source energy savings targets over a comparable 2009 IECC code-built home in the cold climate zone, nearly all components of a home must be optimized. Careful planning and design are critical. To help builders and architects seeking to match the performance of this home, a step-by-step guide through the building shell components of DOE's Challenge Home are provided in a pictorial story book. The end result was a DOE Challenge Home that achieved a HERS Index Score of 20 (43 without PV, the minimum target was 55 for compliance). This home was also awarded the 2012 HOBI for Best Green Energy Efficient Home from the Home Builders & Remodelers Association of Connecticut.« less

  15. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Puttagunta, S.; Grab, J.; Williamson, J.

    Working with builder partners on a test homes allows for vetting of whole-house building strategies to eliminate any potential unintended consequences prior to implementing these solution packages on a production scale. To support this research, CARB partnered with Preferred Builders Inc. on a high-performance test home in Old Greenwich, CT. The philosophy and science behind the 2,700 ft2 'Performance House' was based on the premise that homes should be safe, healthy, comfortable, durable, efficient, and adapt with the homeowners. The technologies and strategies used in the 'Performance House' were not cutting-edge, but simply 'best practices practiced'. The focus was onmore » simplicity in construction, maintenance, and operation. When seeking a 30% source energy savings targets over a comparable 2009 IECC code-built home in the cold climate zone, nearly all components of a home must be optimized. Careful planning and design are critical. To help builders and architects seeking to match the performance of this home, a step-by-step guide through the building shell components of DOE's Challenge Home are provided in a pictorial story book. The end result was a DOE Challenge Home that achieved a HERS Index Score of 20 (43 without PV, the minimum target was 55 for compliance). This home was also awarded the 2012 HOBI for Best Green Energy Efficient Home from the Home Builders & Remodelers Association of Connecticut.« less

  16. Industrial wastes from the boat-building sector in the Marche Region (Italy): a parametric and chemical-physical characterization.

    PubMed

    Carchesio, M; Tatàno, F; Tosi, G; Trivellone, C H

    2013-01-01

    Using the renowned leisure boat-building sector in the Marche Region (Italy) as a case-study, this paper addresses the characterization of (1) the industrial waste generation from the building of composite material-based boats and (2) some chemical-physical properties of representative types of boat-building residues (plastic foam, hardened resin, fibre-reinforced composite residues, and sanding dust). A parametric evaluation based on the number of employees gave a representative unit generation rate per employee (UGRpE) of 1.47 tons(waste) employee(-1) year(-1) for the entire Marche regional boatbuilding district, whereas evaluations carried out separately for three case-study companies provided values of 1.56, 3.07, and 1.12 tons(waste) employee(-1) year(-1) as representative for a mass-produced motor boat builder (case-study company '1'), a customized sailing boat builder (case-study company '2'), and a mould and structural component builder (case-study company '3'), respectively. The original proposal and evaluation of two additional generation rates based on physical characteristics intrinsic to the manufactured product, i.e. the unit generation rate per boat area (UGRpA) and per boat weight (UGRpW), confirmed the higher waste generation for the sailing boat builder(representative UGRpA and UGRpW values of 0.35 tons(waste) m(-2)(boat) year(-1) and 2. 71 tons(waste) tons(-1)(boat) year(-1), respectively) compared with the motor boat builder (representative UGRpA and UGRpW values of 0.06 tons(waste) m(-2)(boat) year(-1) and 0.49 tons(waste) tons(-1)(boat) year(-1), respectively). The chemical-physical property characterization of the selected residues revealed the following aspects: a general condition of low moisture contents; significant ash contents in the glass- and carbon-fibre composite residues and the correlated sanding dust; and relatively high energy content values in the overall range 14,144-32,479 kJ kg(-1), expressed as the lower heating value.

  17. DOE Zero Energy Ready Home Case Study: BPC Green Builders — Trolle Residence, Danbury, CT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    2014-09-01

    The builder of this 1,650-ft2 cabin won a Custom Home honor in the 2014 Housing Innovations Awards. The home meets Passive House Standards with 5.5-in. of foil-faced polysiocyanurate foam boards lining the outside walls, R-55 of rigid EPS foam under the slab, R-86 of blown cellulose in the attic, triple-pane windows, and a single ductless heat pump to heat and cool the entire home.

  18. Development of a beam builder for automatic fabrication of large composite space structures

    NASA Technical Reports Server (NTRS)

    Bodle, J. G.

    1979-01-01

    The composite material beam builder which will produce triangular beams from pre-consolidated graphite/glass/thermoplastic composite material through automated mechanical processes is presented, side member storage, feed and positioning, ultrasonic welding, and beam cutoff are formed. Each process lends itself to modular subsystem development. Initial development is concentrated on the key processes for roll forming and ultrasonic welding composite thermoplastic materials. The construction and test of an experimental roll forming machine and ultrasonic welding process control techniques are described.

  19. Multi-family update to the passive solar construction handbook

    NASA Astrophysics Data System (ADS)

    Howard, B. D.; Callahan, K. D.

    1983-11-01

    Builders and developers will accept passive solar construction and designs for integration with their existing practice if accurate and detailed plans of actual, proven passive solar subsystems and assemblies are made available to them. A Passive Solar Construction Handbook was developed. It focuses primarily upon single family homes. The multifamily update of the Handbook, is described and examples of the valuable builder information are shown. It represents a new breakthrough in DOE sponsored projects, performing a Technology Transfer on a most useful level.

  20. Continuation of research into language concepts for the mission support environment

    NASA Technical Reports Server (NTRS)

    1991-01-01

    A concept for a more intuitive and graphically based Computation (Comp) Builder was developed. The Graphical Comp Builder Prototype was developed, which is an X Window based graphical tool that allows the user to build Comps using graphical symbols. Investigation was conducted to determine the availability and suitability of the Ada programming language for the development of future control center type software. The Space Station Freedom Project identified Ada as the desirable programming language for the development of Space Station Control Center software systems.

  1. DOE Zero Energy Ready Home Case Study: Green Extreme Homes & Carl Franklin Homes — First DOE Zero Energy Ready Home Retrofit, Garland, TX

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    This builder was honored with an Affordable Builder award in the 2014 Housing Innovation Awards, for the first retrofit home certified to the DOE Zero Energy Ready home requirements.The 60-year-old, three-bedroom ranch home is expected to save its homeowner more than $1,000 a year in utility bills compared to a home built to the current 2009 International Energy Conservation Code.

  2. DOE Zero Energy Ready Home Case Study: John Hubert Associates — EXIT-0 House, North Cape May, NJ

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    This house is the first DOE Zero Energy Ready Home for this builder and won a Custom Builder award in the 2014 Housing Innovation Awards. The 1,871-ft2 home features advanced-framed above-grade walls with R-21 fiberglass batt plus an R-3.6-insulated coated OSB sheathing, R-18 rigid-foam-insulated crawlspace walls, solar water heating, a high-efficiency heat pump, an HRV, and mostly LED lighting.

  3. Free amino acids in spider hemolymph.

    PubMed

    Tillinghast, Edward K; Townley, Mark A

    2008-11-01

    We examined the free amino acid composition of hemolymph from representatives of five spider families with an interest in knowing if the amino acid profile in the hemolymph of orb-web-building spiders reflects the high demands for small organic compounds in the sticky droplets of their webs. In nearly all analyses, on both orb and non-orb builders, glutamine was the most abundant free amino acid. Glycine, taurine, proline, histidine, and alanine also tended to be well-represented in orb and non-orb builders. While indications of taxon-specific differences in amino acid composition were observed, it was not apparent that two presumptive precursors (glutamine, taurine) of orb web sticky droplet compounds were uniquely enriched in araneids (orb builders). However, total amino acid concentrations were invariably highest in the araneids and especially so in overwintering juveniles, even as several of the essential amino acids declined during this winter diapause. Comparing the data from this study with those from earlier studies revealed a number of discrepancies. The possible origins of these differences are discussed.

  4. U.S. Department of Energy Zero Energy Ready Home Implementation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rothgeb, Stacey K; Schirber, T.; Mosiman, G.

    The intention of this project is to assist home builders in the upper Midwest in achieving DOE Zero Energy Ready Home program certification, and to document the process and outcomes involved in meeting this rigorous standard. NorthernSTAR, in conjunction with our program partner Building Knowledge, Inc., provided technical support to the builders during the design and construction process. At the time of this publication, four qualifying homes have been completed and an additional three are currently under construction to be completed later this year. Three additional homes were excluded from certification due to the HVAC contractor not completing their requiredmore » credentialing until after completion of the homes, though the energy performance would have otherwise qualified the homes for program certification. Both Amaris Homes and Cobblestone Homes note that participation in the ZERH program provides them with competitive advantage in the market place at reasonable construction costs that also result in extremely satisfied clients who are willing to recommend the builders to friends and family.« less

  5. Approaches to 30 Percent Energy Savings at the Community Scale in the Hot-Humid Climate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Thomas-Rees, S.; Beal, D.; Martin, E.

    2013-03-01

    BA-PIRC has worked with several community-scale builders within the hot humid climate zone to improve performance of production, or community scale, housing. Tommy Williams Homes (Gainesville, FL), Lifestyle Homes (Melbourne, FL), and Habitat for Humanity (various locations, FL) have all been continuous partners of the Building America program and are the subjects of this report to document achievement of the Building America goal of 30% whole house energy savings packages adopted at the community scale. Key aspects of this research include determining how to evolve existing energy efficiency packages to produce replicable target savings, identifying what builders' technical assistance needsmore » are for implementation and working with them to create sustainable quality assurance mechanisms, and documenting the commercial viability through neutral cost analysis and market acceptance. This report documents certain barriers builders overcame and the approaches they implemented in order to accomplish Building America (BA) Program goals that have not already been documented in previous reports.« less

  6. Social learning in nest-building birds: a role for familiarity.

    PubMed

    Guillette, Lauren M; Scott, Alice C Y; Healy, Susan D

    2016-03-30

    It is becoming apparent that birds learn from their own experiences of nest building. What is not clear is whether birds can learn from watching conspecifics build. As social learning allows an animal to gain information without engaging in costly trial-and-error learning, first-time builders should exploit the successful habits of experienced builders. We presented first-time nest-building male zebra finches with either a familiar or an unfamiliar conspecific male building with material of a colour the observer did not like. When given the opportunity to build, males that had watched a familiar male build switched their material preference to that used by the familiar male. Males that observed unfamiliar birds did not. Thus, first-time nest builders use social information and copy the nest material choices when demonstrators are familiar but not when they are strangers. The relationships between individuals therefore influence how nest-building expertise is socially transmitted in zebra finches. © 2016 The Author(s).

  7. Social learning in nest-building birds: a role for familiarity

    PubMed Central

    Guillette, Lauren M.; Scott, Alice C. Y.; Healy, Susan D.

    2016-01-01

    It is becoming apparent that birds learn from their own experiences of nest building. What is not clear is whether birds can learn from watching conspecifics build. As social learning allows an animal to gain information without engaging in costly trial-and-error learning, first-time builders should exploit the successful habits of experienced builders. We presented first-time nest-building male zebra finches with either a familiar or an unfamiliar conspecific male building with material of a colour the observer did not like. When given the opportunity to build, males that had watched a familiar male build switched their material preference to that used by the familiar male. Males that observed unfamiliar birds did not. Thus, first-time nest builders use social information and copy the nest material choices when demonstrators are familiar but not when they are strangers. The relationships between individuals therefore influence how nest-building expertise is socially transmitted in zebra finches. PMID:27009230

  8. BioPartsBuilder: a synthetic biology tool for combinatorial assembly of biological parts.

    PubMed

    Yang, Kun; Stracquadanio, Giovanni; Luo, Jingchuan; Boeke, Jef D; Bader, Joel S

    2016-03-15

    Combinatorial assembly of DNA elements is an efficient method for building large-scale synthetic pathways from standardized, reusable components. These methods are particularly useful because they enable assembly of multiple DNA fragments in one reaction, at the cost of requiring that each fragment satisfies design constraints. We developed BioPartsBuilder as a biologist-friendly web tool to design biological parts that are compatible with DNA combinatorial assembly methods, such as Golden Gate and related methods. It retrieves biological sequences, enforces compliance with assembly design standards and provides a fabrication plan for each fragment. BioPartsBuilder is accessible at http://public.biopartsbuilder.org and an Amazon Web Services image is available from the AWS Market Place (AMI ID: ami-508acf38). Source code is released under the MIT license, and available for download at https://github.com/baderzone/biopartsbuilder joel.bader@jhu.edu Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press.

  9. Space fabrication: Graphite composite truss welding and cap forming subsystems

    NASA Technical Reports Server (NTRS)

    Jenkins, L. M.; Browning, D. L.

    1980-01-01

    An automated beam builder for the fabrication of space structures is described. The beam builder forms a triangular truss 1.3 meters on a side. Flat strips of preconsolidated graphite fiber fabric in a polysulfone matrix are coiled in a storage canister. Heaters raise the material to forming temperature then the structural cap section is formed by a series of rollers. After cooling, cross members and diagonal tension cords are ultrasonically welded in place to complete the truss. The stability of fabricated structures and composite materials is also examined.

  10. Moisture Performance of High-R Wall Systems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Shah, Nay B.; Kochkin, Vladimir

    High-performance homes offer improved comfort, lower utility bills, and assured durability. The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because mainstream builders are hesitant to make the transition. In a survey of builders on this topic, one of the challenges identifi ed is an industry-wide concern about the long-term moisture performance of energy-effi cient walls. This study takes a step toward addressing this concern through direct monitoring of themore » moisture performance of high-R walls in occupied homes in several climate zones. In addition, the robustness of the design and modeling tools for selecting high-R wall solutions is evaluated using the monitored data from the field. The information and knowledge gained through this research will provide an objective basis for decision-making so that builders can implement advanced designs with confidence.« less

  11. Mini-Split Heat Pump Evaluation and Zero Energy Ready Home Support

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Herk, Anastasia

    IBACOS worked with builder Imagine Homes to evaluate the performance of an occupied new construction test house following construction of the house in the hot, humid climate of San Antonio, Texas. The project measures the effectiveness of a space conditioning strategy using a multihead mini-split heat pump (MSHP) system in a reduced-load home to achieve acceptable comfort levels (temperature and humidity) and energy performance. IBACOS collected long-term data and analyzed the energy consumption and comfort conditions of the occupied house after one year of operation. Although measured results indicate that the test system provides comfort both inside and outside themore » ASHRAE Standard 55-2010 range, the occupants of the house claimed both adequate comfort and appreciation of the ease of use and flexibility of the installed MSHP system. IBACOS also assisted the builder to evaluate design and specification changes necessary to comply with Zero Energy Ready Home, but the builder chose to not move forward with it because of concerns about the 'solar ready' requirements of the program.« less

  12. Building America Case Study: Occupant Comfort from a Mini-Split Heat Pump, San Antonio, Texas

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    IBACOS worked with builder Imagine Homes to evaluate the performance of an occupied new construction test house following construction of the house in the hot, humid climate of San Antonio, Texas. The project measures the effectiveness of a space conditioning strategy using a multihead mini-split heat pump (MSHP) system in a reduced-load home to achieve acceptable comfort levels (temperature and humidity) and energy performance. IBACOS collected long-term data and analyzed the energy consumption and comfort conditions of the occupied house after one year of operation. Although measured results indicate that the test system provides comfort both inside and outside themore » ASHRAE Standard 55-2010 range, the occupants of the house claimed both adequate comfort and appreciation of the ease of use and flexibility of the installed MSHP system. IBACOS also assisted the builder to evaluate design and specification changes necessary to comply with Zero Energy Ready Home, but the builder chose to not move forward with it because of concerns about the 'solar ready' requirements of the program.« less

  13. New Whole-House Solutions Case Study: A Production Builder's Passive House - Denver, Colorado

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    Brookfield Home’s first project is in a community called Midtown in Denver, Colorado, in which the builder took on the challenge of increased energy efficiency by creating a Passive House (PH)-certified model home. Brookfield worked with the U.S. Department of Energy’s Building America research team IBACOS to create the home, evaluate advanced building technologies, and use the home as a marketing tool for potential homebuyers. Brookfield also worked with KGA studio architects to create a new floor plan that would be constructed to the PH standard as an upgrade option.

  14. A framework for incorporating DTI Atlas Builder registration into Tract-Based Spatial Statistics and a simulated comparison to standard TBSS.

    PubMed

    Leming, Matthew; Steiner, Rachel; Styner, Martin

    2016-02-27

    Tract-based spatial statistics (TBSS) 6 is a software pipeline widely employed in comparative analysis of the white matter integrity from diffusion tensor imaging (DTI) datasets. In this study, we seek to evaluate the relationship between different methods of atlas registration for use with TBSS and different measurements of DTI (fractional anisotropy, FA, axial diffusivity, AD, radial diffusivity, RD, and medial diffusivity, MD). To do so, we have developed a novel tool that builds on existing diffusion atlas building software, integrating it into an adapted version of TBSS called DAB-TBSS (DTI Atlas Builder-Tract-Based Spatial Statistics) by using the advanced registration offered in DTI Atlas Builder 7 . To compare the effectiveness of these two versions of TBSS, we also propose a framework for simulating population differences for diffusion tensor imaging data, providing a more substantive means of empirically comparing DTI group analysis programs such as TBSS. In this study, we used 33 diffusion tensor imaging datasets and simulated group-wise changes in this data by increasing, in three different simulations, the principal eigenvalue (directly altering AD), the second and third eigenvalues (RD), and all three eigenvalues (MD) in the genu, the right uncinate fasciculus, and the left IFO. Additionally, we assessed the benefits of comparing the tensors directly using a functional analysis of diffusion tensor tract statistics (FADTTS 10 ). Our results indicate comparable levels of FA-based detection between DAB-TBSS and TBSS, with standard TBSS registration reporting a higher rate of false positives in other measurements of DTI. Within the simulated changes investigated here, this study suggests that the use of DTI Atlas Builder's registration enhances TBSS group-based studies.

  15. [Bodybuilding: hypokalemia and hypophosphatemia].

    PubMed

    Britschgi, F; Zünd, G

    1991-08-17

    In preparing for competitive body building, body builders--in addition to continuous and hard muscle training--engage in stringent dietetic manipulations: the first few months of hypercaloric nutrition, rich in proteins, are devoted to the build-up of muscle mass. A second phase of reduced caloric intake is designed reduce subcutaneous fat, while, during the last week of preparations, extreme carbohydrate intake aims at loading muscles with glycogen. Simultaneously, sodium and water restriction results in extracellular and therefore subcutaneous volume deficit and better "definition" of muscle contours and structure. In the course of these dietetic manipulations a young body builder develops hypokalemia, hypophosphatemia, rhabdomyolysis and flaccid tetraparesis. The disturbances are pathophysiologically predictable.

  16. Changing imperatives of architecture affecting dimension stone use in world commerce

    USGS Publications Warehouse

    Mcdonald, W.H.; Darr, D.D.

    1996-01-01

    The use of stone in building construction predates written history. From the time that stone was first used, builders have constructed stone buildings predominately from local or regional materials. However, since World War II, the stone business has become increasingly global. For example, French limestone is now sold to builders in the United States, and American granite is shipped to Japan. The internationalization of architectural and construction firms has encouraged this trend. Differences among nations in trade practices, environmental demands and the level of knowledge of dimension-stone characteristics make international trading in stone a risky and potentially disastrous business for unwary participants.

  17. PiVoT GPS Receiver

    NASA Technical Reports Server (NTRS)

    Wennersten, Miriam; Banes, Vince; Boegner, Greg; Clagnett, Charles; Dougherty, Lamar; Edwards, Bernard; Roman, Joe; Bauer, Frank H. (Technical Monitor)

    2001-01-01

    NASA Goddard Space Flight Center has built an open architecture, 24 channel spaceflight Global Positioning System (GPS) receiver. The compact PCI PiVoT GPS receiver card is based on the Mitel/GEC Plessey Builder 2 board. PiVoT uses two Plessey 2021 correlators to allow tracking of up to 24 separate GPS SV's on unique channels. Its four front ends can support four independent antennas, making it a useful card for hosting GPS attitude determination algorithms. It has been built using space quality, radiation tolerant parts. The PiVoT card works at a lower signal to noise ratio than the original Builder 2 board. It also hosts an improved clock oscillator. The PiVoT software is based on the original Piessey Builder 2 software ported to the Linux operating system. The software is posix compliant and can be easily converted to other posix operating systems. The software is open source to anyone with a licensing agreement with Plessey. Additional tasks can be added to the software to support GPS science experiments or attitude determination algorithms. The next generation PiVoT receiver will be a single radiation hardened compact PCI card containing the microprocessor and the GPS receiver optimized for use above the GPS constellation.

  18. Big data analytics in immunology: a knowledge-based approach.

    PubMed

    Zhang, Guang Lan; Sun, Jing; Chitkushev, Lou; Brusic, Vladimir

    2014-01-01

    With the vast amount of immunological data available, immunology research is entering the big data era. These data vary in granularity, quality, and complexity and are stored in various formats, including publications, technical reports, and databases. The challenge is to make the transition from data to actionable knowledge and wisdom and bridge the knowledge gap and application gap. We report a knowledge-based approach based on a framework called KB-builder that facilitates data mining by enabling fast development and deployment of web-accessible immunological data knowledge warehouses. Immunological knowledge discovery relies heavily on both the availability of accurate, up-to-date, and well-organized data and the proper analytics tools. We propose the use of knowledge-based approaches by developing knowledgebases combining well-annotated data with specialized analytical tools and integrating them into analytical workflow. A set of well-defined workflow types with rich summarization and visualization capacity facilitates the transformation from data to critical information and knowledge. By using KB-builder, we enabled streamlining of normally time-consuming processes of database development. The knowledgebases built using KB-builder will speed up rational vaccine design by providing accurate and well-annotated data coupled with tailored computational analysis tools and workflow.

  19. Accessing the public MIMIC-II intensive care relational database for clinical research.

    PubMed

    Scott, Daniel J; Lee, Joon; Silva, Ikaro; Park, Shinhyuk; Moody, George B; Celi, Leo A; Mark, Roger G

    2013-01-10

    The Multiparameter Intelligent Monitoring in Intensive Care II (MIMIC-II) database is a free, public resource for intensive care research. The database was officially released in 2006, and has attracted a growing number of researchers in academia and industry. We present the two major software tools that facilitate accessing the relational database: the web-based QueryBuilder and a downloadable virtual machine (VM) image. QueryBuilder and the MIMIC-II VM have been developed successfully and are freely available to MIMIC-II users. Simple example SQL queries and the resulting data are presented. Clinical studies pertaining to acute kidney injury and prediction of fluid requirements in the intensive care unit are shown as typical examples of research performed with MIMIC-II. In addition, MIMIC-II has also provided data for annual PhysioNet/Computing in Cardiology Challenges, including the 2012 Challenge "Predicting mortality of ICU Patients". QueryBuilder is a web-based tool that provides easy access to MIMIC-II. For more computationally intensive queries, one can locally install a complete copy of MIMIC-II in a VM. Both publicly available tools provide the MIMIC-II research community with convenient querying interfaces and complement the value of the MIMIC-II relational database.

  20. LEGO products have become more complex

    PubMed Central

    2018-01-01

    The LEGO Group has become the largest toy company in the world and they can look back to a proud history of more than 50 years of producing bricks and other toys. Starting with a simple set of basic bricks their range of toys appeared to have increased in complexity over the years. We processed the inventories of most sets from 1955–2015 and our analysis showed that LEGO sets have become bigger, more colorful and more specialized. The vocabulary of bricks has increased significantly resulting in sets sharing fewer bricks. The increased complexity of LEGO sets and bricks enables skilled builders to design ever more amazing models but it may also overwhelm less skilled or younger builders. PMID:29293655

  1. DOE Zero Energy Ready Home Case Study: Thrive Home Builders, Lowry Plan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pacific Northwest National Laboratory

    Thrive Home Builders built this 4,119-ft2 home at the Lowry development in Denver, Colorado, to the high-performance criteria of the U.S. Department of Energy’s Zero Energy Ready Home Program. Despite the dense positioning of the homes, mono-plane roof designs afforded plenty of space for the 8.68 kW of photovoltaic panels. With the PV, the home achieves a Home Energy Rating System (HERS) score of 4 and the home owners should enjoy energy bills of about $-11 a year. Without the PV, the home would score a HERS 38 (far lower than the HERS 80 to 100 of typical new homes).

  2. LEGO products have become more complex.

    PubMed

    Bartneck, Christoph; Moltchanova, Elena

    2018-01-01

    The LEGO Group has become the largest toy company in the world and they can look back to a proud history of more than 50 years of producing bricks and other toys. Starting with a simple set of basic bricks their range of toys appeared to have increased in complexity over the years. We processed the inventories of most sets from 1955-2015 and our analysis showed that LEGO sets have become bigger, more colorful and more specialized. The vocabulary of bricks has increased significantly resulting in sets sharing fewer bricks. The increased complexity of LEGO sets and bricks enables skilled builders to design ever more amazing models but it may also overwhelm less skilled or younger builders.

  3. Performance of the CMS Event Builder

    NASA Astrophysics Data System (ADS)

    Andre, J.-M.; Behrens, U.; Branson, J.; Brummer, P.; Chaze, O.; Cittolin, S.; Contescu, C.; Craigs, B. G.; Darlea, G.-L.; Deldicque, C.; Demiragli, Z.; Dobson, M.; Doualot, N.; Erhan, S.; Fulcher, J. F.; Gigi, D.; Gładki, M.; Glege, F.; Gomez-Ceballos, G.; Hegeman, J.; Holzner, A.; Janulis, M.; Jimenez-Estupiñán, R.; Masetti, L.; Meijers, F.; Meschi, E.; Mommsen, R. K.; Morovic, S.; O'Dell, V.; Orsini, L.; Paus, C.; Petrova, P.; Pieri, M.; Racz, A.; Reis, T.; Sakulin, H.; Schwick, C.; Simelevicius, D.; Zejdl, P.

    2017-10-01

    The data acquisition system (DAQ) of the CMS experiment at the CERN Large Hadron Collider assembles events at a rate of 100 kHz, transporting event data at an aggregate throughput of {\\mathscr{O}}(100 {{GB}}/{{s}}) to the high-level trigger farm. The DAQ architecture is based on state-of-the-art network technologies for the event building. For the data concentration, 10/40 Gbit/s Ethernet technologies are used together with a reduced TCP/IP protocol implemented in FPGA for a reliable transport between custom electronics and commercial computing hardware. A 56 Gbit/s Infiniband FDR Clos network has been chosen for the event builder. This paper presents the implementation and performance of the event-building system.

  4. Business Solutions Case Study: Marketing Zero Energy Homes: Tommy Williams Homes, Gainesville, Florida

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    Building America research has shown that high-performance homes can potentially give builders an edge in the marketplace and can boost sales, but it doesn't happen automatically. It requires a tailored, easy-to-understand marketing campaign, and sometimes a little flair. This case study highlights the successful marketing approach of Tommy Williams Homes, which devotes resources to advertising, targeted social media outlets and blogs, realtor education seminars, and groundbreaking and open house celebrations. As a result, in one community, 2013 property sales records show that TWH outsells the only other builder in the development at a higher price, with fewer days on themore » market.« less

  5. Lipoprotein profile, diet and body composition in athletes practicing mixed an anaerobic activities.

    PubMed

    Giada, F; Zuliani, G; Baldo-Enzi, G; Palmieri, E; Volpato, S; Vitale, E; Magnanini, P; Colozzi, A; Vecchiet, L; Fellin, R

    1996-09-01

    To compare lipoprotein profile, body composition and diet in a sample of athletes practicing mixed and anaerobic sports activities, and in a group of sedentary controls. Cross selectional study. Twenty professional soccer players (mixed trained), twenty body builders (anaerobic trained) and twenty sedentary subjects, all males and matched for age were studied. No significant differences in total serum cholesterol, triglycerides, HDL-C, LDL-C, apolipoprotein A-I, A-II, B, C-II, C-III, and E levels were found when the three groups were compared. Bioelectrical impendance analysis disclosed significantly lower body fat percentages in both groups of athletes, and increased fat free mass only in body builders. Daily calorie intake was higher, and alcohol intake was lower in the athletes, compared with controls. Body builders had lower carbohydrate, and higher protein and cholesterol intakes, while soccer players had a lower polyunsaturated to saturated fat ratio. None of the apolipoproteins examined was correlated with any body composition of diet parameters. No correlations between lipid parameters and anthropometric or dietary variables were found by multivariate analysis when the subjects were considered as a whole. Our data suggest that in healthy lean normolipemic males, the lipoprotein profile is not modified by mixed or anaerobic sport activities and the respective modifications in body composition and diet.

  6. PiVoT GPS Receiver

    NASA Technical Reports Server (NTRS)

    Wennersten, Miriam Dvorak; Banes, Anthony Vince; Boegner, Gregory J.; Dougherty, Lamar; Edwards, Bernard L.; Roman, Joseph; Bauer, Frank H. (Technical Monitor)

    2001-01-01

    NASA Goddard Space Flight Center has built an open architecture, 24 channel space flight GPS receiver. The CompactPCI PiVoT GPS receiver card is based on the Mitel/GEC Plessey Builder-2 board. PiVoT uses two Plessey 2021 correlators to allow tracking of up to 24 separate GPS SV's on unique channels. Its four front ends can support four independent antennas, making it a useful card for hosting GPS attitude determination algorithms. It has been built using space quality, radiation tolerant parts. The PiVoT card will track a weaker signal than the original Builder 2 board. It also hosts an improved clock oscillator. The PiVoT software is based on the original Plessey Builder 2 software ported to the Linux operating system. The software is POSIX complaint and can easily be converted to other POSIX operating systems. The software is open source to anyone with a licensing agreement with Plessey. Additional tasks can be added to the software to support GPS science experiments or attitude determination algorithms. The next generation PiVoT receiver will be a single radiation hardened CompactPCI card containing the microprocessor and the GPS receiver optimized for use above the GPS constellation. PiVoT was flown successfully on a balloon in July, 2001, for its first non-simulated flight.

  7. Accessing the public MIMIC-II intensive care relational database for clinical research

    PubMed Central

    2013-01-01

    Background The Multiparameter Intelligent Monitoring in Intensive Care II (MIMIC-II) database is a free, public resource for intensive care research. The database was officially released in 2006, and has attracted a growing number of researchers in academia and industry. We present the two major software tools that facilitate accessing the relational database: the web-based QueryBuilder and a downloadable virtual machine (VM) image. Results QueryBuilder and the MIMIC-II VM have been developed successfully and are freely available to MIMIC-II users. Simple example SQL queries and the resulting data are presented. Clinical studies pertaining to acute kidney injury and prediction of fluid requirements in the intensive care unit are shown as typical examples of research performed with MIMIC-II. In addition, MIMIC-II has also provided data for annual PhysioNet/Computing in Cardiology Challenges, including the 2012 Challenge “Predicting mortality of ICU Patients”. Conclusions QueryBuilder is a web-based tool that provides easy access to MIMIC-II. For more computationally intensive queries, one can locally install a complete copy of MIMIC-II in a VM. Both publicly available tools provide the MIMIC-II research community with convenient querying interfaces and complement the value of the MIMIC-II relational database. PMID:23302652

  8. Approaches to 30% Energy Savings at the Community Scale in the Hot-Humid Climate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Thomas-Rees, S.; Beal, D.; Martin, E.

    2013-03-01

    BA-PIRC has worked with several community-scale builders within the hot humid climate zone to improve performance of production, or community scale, housing. Tommy Williams Homes (Gainesville, FL), Lifestyle Homes (Melbourne, FL), and Habitat for Humanity (various locations, FL) have all been continuous partners of the BA Program and are the subjects of this report to document achievement of the Building America goal of 30% whole house energy savings packages adopted at the community scale. The scope of this report is to demonstrate achievement of these goals though the documentation of production-scale homes built cost-effectively at the community scale, and modeledmore » to reduce whole-house energy use by 30% in the Hot Humid climate region. Key aspects of this research include determining how to evolve existing energy efficiency packages to produce replicable target savings, identifying what builders' technical assistance needs are for implementation and working with them to create sustainable quality assurance mechanisms, and documenting the commercial viability through neutral cost analysis and market acceptance. This report documents certain barriers builders overcame and the approaches they implemented in order to accomplish Building America (BA) Program goals that have not already been documented in previous reports.« less

  9. Constructing a Database from Multiple 2D Images for Camera Pose Estimation and Robot Localization

    NASA Technical Reports Server (NTRS)

    Wolf, Michael; Ansar, Adnan I.; Brennan, Shane; Clouse, Daniel S.; Padgett, Curtis W.

    2012-01-01

    The LMDB (Landmark Database) Builder software identifies persistent image features (landmarks) in a scene viewed multiple times and precisely estimates the landmarks 3D world positions. The software receives as input multiple 2D images of approximately the same scene, along with an initial guess of the camera poses for each image, and a table of features matched pair-wise in each frame. LMDB Builder aggregates landmarks across an arbitrarily large collection of frames with matched features. Range data from stereo vision processing can also be passed to improve the initial guess of the 3D point estimates. The LMDB Builder aggregates feature lists across all frames, manages the process to promote selected features to landmarks, and iteratively calculates the 3D landmark positions using the current camera pose estimations (via an optimal ray projection method), and then improves the camera pose estimates using the 3D landmark positions. Finally, it extracts image patches for each landmark from auto-selected key frames and constructs the landmark database. The landmark database can then be used to estimate future camera poses (and therefore localize a robotic vehicle that may be carrying the cameras) by matching current imagery to landmark database image patches and using the known 3D landmark positions to estimate the current pose.

  10. Effects of supported electronic text and explicit instruction on science comprehension by students with autism spectrum disorder

    NASA Astrophysics Data System (ADS)

    Knight, Victoria Floyd

    Supported electronic text (eText), or text that has been altered to increase access and provide support to learners, may promote comprehension of science content for students with disabilities. According to CAST, Book Builder(TM) uses supported eText to promote reading for meaning for all students. Although little research has been conducted in the area of supported eText for students with autism spectrum disorders (ASD), technology (e.g., computer assisted instruction) has been used for over 35 years to instruct students with ASD in academic areas. The purpose of this study was to evaluate the effects of a supported eText and explicit instruction on the science vocabulary and comprehension of four middle school students with ASD. Researchers used a multiple probe across participants design to evaluate the Book Builder (TM) program on measures of vocabulary, literal comprehension, and application questions. Results indicated a functional relation between the Book Builder(TM) and explicit instruction (i.e., model-lead-test, examples and non-examples, and referral to the definition) and the number of correct responses on the probe. In addition, students were able to generalize concepts to untrained exemplars. Finally, teachers and students validate the program as practical and useful.

  11. DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    The builder worked with Building Science Corporation to design ten HERS 53 homes with ICF foundations, foam-sheathed above-grade walls, and high-efficiency furnaces with fresh air intake and jump ducts.

  12. Adding run history to CLIPS

    NASA Technical Reports Server (NTRS)

    Tuttle, Sharon M.; Eick, Christoph F.

    1991-01-01

    To debug a C Language Integrated Production System (CLIPS) program, certain 'historical' information about a run is needed. It would be convenient for system builders to have the capability to request such information. We will discuss how historical Rete networks can be used for answering questions that help a system builder detect the cause of an error in a CLIPS program. Moreover, the cost of maintaining a historical Rete network is compared with that for a classical Rete network. We will demonstrate that the cost for assertions is only slightly higher for a historical Rete network. The cost for handling retraction could be significantly higher; however, we will show that by using special data structures that rely on hashing, it is also possible to implement retractions efficiently.

  13. Meteore 63 commercial seaplane

    NASA Technical Reports Server (NTRS)

    1927-01-01

    Societe Provencale de Constructions Aeronautiques, builder of the "Meteore 63" has constructed a three engine (biplane) seaplane which has met conditions for a seaworthy certificate of the first class.

  14. Community-Wide Zero Energy Ready Home Standard

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Herk, A.; Beggs, T.

    This report outlines the steps a developer can use when looking to create and implement higher performance standards such as the U.S. Department of Energy (DOE) Zero Energy Ready Home (ZERH) standards in a community. The report also describes the specific examples of how this process was followed by a developer, Forest City, in the Stapleton community in Denver, Colorado. IBACOS described the steps used to begin to bring the DOE ZERH standard to the Forest City Stapleton community based on 15 years of community-scale development work done by IBACOS. As a result of this prior IBACOS work, the teammore » gained an understanding of the various components that a master developer needs to consider and created strategies for incorporating those components in the initial phases of development to achieve higher performance buildings in the community. An automated scoring system can be used to perform an internal audit that provides a detailed and consistent evaluation of how several homes under construction or builders' floor plans compare with the requirements of the DOE Zero Energy Ready Home program. This audit can be performed multiple times at specific milestones during construction to allow the builder to make changes as needed throughout construction for the project to meet Zero Energy Ready Home standards. This scoring system also can be used to analyze a builder's current construction practices and design.« less

  15. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Herk, A.; Poerschke, A.; Beach, R.

    In 2012-2013, IBACOS worked with a builder, Brookfield Homes in Denver, Colorado, to design and construct a Passive House certified model home. IBACOS used several modeling programs and calculation methods to complete the final design package along with Brookfield's architect KGA Studio. This design package included upgrades to the thermal enclosure, basement insulation, windows, and heating, ventilation, and air conditioning. Short-term performance testing in the Passive House was done during construction and after construction. Testing with a blower door indicated that whole-building air leakage to the outside was 324 CFM and 0.60 ACH50. The other two test homes had littlemore » short-term testing done post-construction by the local energy rater. IBACOS then monitored the energy consumption and whole-house comfort conditions of that occupied Passive House after one year of operation and compared the monitoring results to those for two other occupied test houses in the same area with similar square footage but slightly different floor plans. IBACOS also assisted the builder, Brookfield Homes, in researching design scenarios for Zero Energy Ready Home and ENERGY STAR acceptance levels. IBACOS also assisted Brookfield in conceptualizing product for Denver's Brighton Heights area. Brookfield was considering building to Zero Energy Ready Home standards in that location. IBACOS provided strategies that Brookfield may draw from in the event the builder chooses to pursue a Zero Energy Ready Home plan for that market.« less

  16. Building America Case Study: Measure Guideline: Guidance on Taped Insulating Sheathing Drainage Planes (Fact Sheet)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    This guide provides information and recommendations to the following groups: Insulation contractors, General contractors, Builders, Home remodelers, Mechanical contractors, and Homeowners as a guide to the work that needs to be done. The order of work completed during home construction and retrofit improvements is important. Health and safety issues must be addressed first and are more important than durability issues. And durability issues are more important than saving energy. Not all techniques can apply to all houses. Special conditions will require special action. Some builders or homeowners will wish to do more than the important but basic retrofit strategies outlinedmore » by this guide. The following are best practice and product recommendations from the interviewed contractors and home builders who collectively have a vast amount of experience. Three significant items were discussed with the group which are required to make taped insulating sheathing a simple, long term, and durable drainage plane: 4. Horizontal joints should be limited or eliminated wherever possible 5. Where a horizontal joint exists use superior materials 6. Frequent installation inspection and regular trade training are required to maintain proper installation Section 5 of this measure guideline contains the detailed construction procedure for the three recommended methods to effectively seal the joints in exterior insulating sheathing to create a simple, long term, and durable drainage plane.« less

  17. DOE Office of Scientific and Technical Information (OSTI.GOV)

    L. Arena

    High-R wall assemblies (R-40 and above) are gaining popularity in the market due to programs like the DOE's Zero Energy Ready Home program, Passive House (PH), Net Zero Energy Home (NZEH) challenges in several states, and highly incentivized retrofit programs. In response to this demand, several builders have successfully used 'double wall' systems to more practically achieve higher R-values in thicker, framed walls. To builders of conventional stick-framed homes, often one of the most appealing features of double wall systems is that there are very few new exterior details. Exterior sheathing, structural bracing, house wrap or building paper, window andmore » door flashing, and siding attachment are usually identical to good details in conventional framed wall systems. The information presented in this guide is intended to reduce the risk of failure in these types of assemblies, increase durability, and result in a reduction of material brought to landfills due to failures and resulting decay. While this document focuses on double wall framing techniques, the majority of the information on how to properly construct and finish high R-value assemblies is applicable to all wall assemblies that do not have foam insulation installed on the exterior of the structural sheathing. The techniques presented have been shown through field studies to reduce the likelihood of mold growth and moisture related damage and are intended for builders, framing contractors, architects, and consultants involved in designing and building super insulated homes.« less

  18. An Application Programming Interface for Synthetic Snowflake Particle Structure and Scattering Data

    NASA Technical Reports Server (NTRS)

    Lammers, Matthew; Kuo, Kwo-Sen

    2017-01-01

    The work by Kuo and colleagues on growing synthetic snowflakes and calculating their single-scattering properties has demonstrated great potential to improve the retrievals of snowfall. To grant colleagues flexible and targeted access to their large collection of sizes and shapes at fifteen (15) microwave frequencies, we have developed a web-based Application Programming Interface (API) integrated with NASA Goddard's Precipitation Processing System (PPS) Group. It is our hope that the API will enable convenient programmatic utilization of the database. To help users better understand the API's capabilities, we have developed an interactive web interface called the OpenSSP API Query Builder, which implements an intuitive system of mechanisms for selecting shapes, sizes, and frequencies to generate queries, with which the API can then extract and return data from the database. The Query Builder also allows for the specification of normalized particle size distributions by setting pertinent parameters, with which the API can also return mean geometric and scattering properties for each size bin. Additionally, the Query Builder interface enables downloading of raw scattering and particle structure data packages. This presentation will describe some of the challenges and successes associated with developing such an API. Examples of its usage will be shown both through downloading output and pulling it into a spreadsheet, as well as querying the API programmatically and working with the output in code.

  19. DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    The first Challenge Home built in New England features cool-roof shingles, HERS 20–42, and walls densely packed with blown fiberglass. This house won a 2013 Housing Innovation Award in the custom builder category.

  20. Space fabrication demonstration system. [beam builder and induction fastening

    NASA Technical Reports Server (NTRS)

    1980-01-01

    The development effort on the composite beam cap fabricator was completed within cost and close to abbreviated goals. The design and analysis of flight weight primary and secondary beam builder structures proceeded satisfactorily but remains curtailed until further funding is made available to complete the work. The induction fastening effort remains within cost and schedule constraints. Tests of the LARC prototype induction welder is continuing in an instrumented test stand comprised of a Dumore drill press (air over oil feed for variable applied loads) and a dynamometer to measure actual welding loads. Continued testing shows that the interface screening must be well impregnated with resin to ensure proper flow when bonding graphite-acrylic lap shear samples. Specimens prepared from 0.030 inch thick graphite-polyethersulfone are also available for future induction fastening evaluation.

  1. Serenbe Nest Cottages

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Butler, T.; Curtis, O.; Kim, E.

    2012-12-01

    As part of the NAHB Research Center Industry Partnership, Southface partnered with Martin Dodson Builders and the Serenbe community on the construction of a new test home in the suburbs of Atlanta, GA, in the mixed humid climate zone. The most recent subdivision within the Serenbe community, the Nest, will contain 15 small footprint cottage-style homes, and Southface has selected Lot Nine, as the test home for this study. This Nest subdivision serves as a project showcase for both the builder partner and the Serenbe community as a whole. The planning and design incorporated into the Nest cottages will bemore » implemented in each home within the subdivision. These homes addresses Building America savings targets and serve as a basis of design for other homes Martin Dodson plans to build within the Serenbe community.« less

  2. Serenbe Nest Cottages

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Butler, T.; Curtis, O.; Kim, E.

    2012-12-01

    As part of the NAHB Research Center Industry Partnership, Southface partnered with Martin Dodson Builders and the Serenbe community on the construction of a new test home in the suburbs of Atlanta, GA in the mixed humid climate zone. The most recent subdivision within the Serenbe community, the Nest, will contain 15 small footprint cottage style homes, and Southface has selected Lot Nine, as the test home for this study. This Nest subdivision serves as a project showcase for both the builder partner and the Serenbe community as a whole. The planning and design incorporated into the Nest cottages willmore » be implemented in each home within the subdivision. These homes addresses Building America Savings targets and serve as a basis of design for other homes Martin Dodson plans to build within the Serenbe community.« less

  3. Building America Best Practices Series, Volume 6: High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Baechler, Michael C.; Gilbride, Theresa L.; Ruiz, Kathleen A.

    This guide is was written by PNNL for the US Department of Energy's Building America program to provide information for residential production builders interested in building near zero energy homes. The guide provides indepth descriptions of various roof-top photovoltaic power generating systems for homes. The guide also provides extensive information on various designs of solar thermal water heating systems for homes. The guide also provides construction company owners and managers with an understanding of how solar technologies can be added to their homes in a way that is cost effective, practical, and marketable. Twelve case studies provide examples of productionmore » builders across the United States who are building energy-efficient homes with photovoltaic or solar water heating systems.« less

  4. Are coral reefs victims of their own past success?

    PubMed

    Renema, Willem; Pandolfi, John M; Kiessling, Wolfgang; Bosellini, Francesca R; Klaus, James S; Korpanty, Chelsea; Rosen, Brian R; Santodomingo, Nadiezhda; Wallace, Carden C; Webster, Jody M; Johnson, Kenneth G

    2016-04-01

    As one of the most prolific and widespread reef builders, the staghorn coral Acropora holds a disproportionately large role in how coral reefs will respond to accelerating anthropogenic change. We show that although Acropora has a diverse history extended over the past 50 million years, it was not a dominant reef builder until the onset of high-amplitude glacioeustatic sea-level fluctuations 1.8 million years ago. High growth rates and propagation by fragmentation have favored staghorn corals since this time. In contrast, staghorn corals are among the most vulnerable corals to anthropogenic stressors, with marked global loss of abundance worldwide. The continued decline in staghorn coral abundance and the mounting challenges from both local stress and climate change will limit the coral reefs' ability to provide ecosystem services.

  5. Are coral reefs victims of their own past success?

    PubMed Central

    Renema, Willem; Pandolfi, John M.; Kiessling, Wolfgang; Bosellini, Francesca R.; Klaus, James S.; Korpanty, Chelsea; Rosen, Brian R.; Santodomingo, Nadiezhda; Wallace, Carden C.; Webster, Jody M.; Johnson, Kenneth G.

    2016-01-01

    As one of the most prolific and widespread reef builders, the staghorn coral Acropora holds a disproportionately large role in how coral reefs will respond to accelerating anthropogenic change. We show that although Acropora has a diverse history extended over the past 50 million years, it was not a dominant reef builder until the onset of high-amplitude glacioeustatic sea-level fluctuations 1.8 million years ago. High growth rates and propagation by fragmentation have favored staghorn corals since this time. In contrast, staghorn corals are among the most vulnerable corals to anthropogenic stressors, with marked global loss of abundance worldwide. The continued decline in staghorn coral abundance and the mounting challenges from both local stress and climate change will limit the coral reefs’ ability to provide ecosystem services. PMID:27152330

  6. Graphical user interfaces for symbol-oriented database visualization and interaction

    NASA Astrophysics Data System (ADS)

    Brinkschulte, Uwe; Siormanolakis, Marios; Vogelsang, Holger

    1997-04-01

    In this approach, two basic services designed for the engineering of computer based systems are combined: a symbol-oriented man-machine-service and a high speed database-service. The man-machine service is used to build graphical user interfaces (GUIs) for the database service; these interfaces are stored using the database service. The idea is to create a GUI-builder and a GUI-manager for the database service based upon the man-machine service using the concept of symbols. With user-definable and predefined symbols, database contents can be visualized and manipulated in a very flexible and intuitive way. Using the GUI-builder and GUI-manager, a user can build and operate its own graphical user interface for a given database according to its needs without writing a single line of code.

  7. DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    Quadrant moved ducts and high efficiency furnace inside conditioned space on nearly all 300 customizable house plans. The builder uses dry, true factory-assembled walls, extensive air sealing, and just in time delivery for pre-sold homes.

  8. PDS4 Bundle Creation Governance Using BPMN

    NASA Astrophysics Data System (ADS)

    Radulescu, C.; Levoe, S. R.; Algermissen, S. S.; Rye, E. D.; Hardman, S. H.

    2015-06-01

    The AMMOS-PDS Pipeline Service (APPS) provides a Bundle Builder tool, which governs the process of creating, and ultimately generates, PDS4 bundles incrementally, as science products are being generated.

  9. Question Builder: Be Prepared for Your Next Medical Appointment

    MedlinePlus

    ... Scientific Peer Review Award Process Post-Award Grant Management AHRQ Grantee Profiles Getting Recognition for Your AHRQ-Funded Study Contracts Project Research Online Database (PROD) Searchable database of AHRQ ...

  10. Building v/s Exploring Models: Comparing Learning of Evolutionary Processes through Agent-based Modeling

    NASA Astrophysics Data System (ADS)

    Wagh, Aditi

    Two strands of work motivate the three studies in this dissertation. Evolutionary change can be viewed as a computational complex system in which a small set of rules operating at the individual level result in different population level outcomes under different conditions. Extensive research has documented students' difficulties with learning about evolutionary change (Rosengren et al., 2012), particularly in terms of levels slippage (Wilensky & Resnick, 1999). Second, though building and using computational models is becoming increasingly common in K-12 science education, we know little about how these two modalities compare. This dissertation adopts agent-based modeling as a representational system to compare these modalities in the conceptual context of micro-evolutionary processes. Drawing on interviews, Study 1 examines middle-school students' productive ways of reasoning about micro-evolutionary processes to find that the specific framing of traits plays a key role in whether slippage explanations are cued. Study 2, which was conducted in 2 schools with about 150 students, forms the crux of the dissertation. It compares learning processes and outcomes when students build their own models or explore a pre-built model. Analysis of Camtasia videos of student pairs reveals that builders' and explorers' ways of accessing rules, and sense-making of observed trends are of a different character. Builders notice rules through available blocks-based primitives, often bypassing their enactment while explorers attend to rules primarily through the enactment. Moreover, builders' sense-making of observed trends is more rule-driven while explorers' is more enactment-driven. Pre and posttests reveal that builders manifest a greater facility with accessing rules, providing explanations manifesting targeted assembly. Explorers use rules to construct explanations manifesting non-targeted assembly. Interviews reveal varying degrees of shifts away from slippage in both modalities, with students who built models not incorporating slippage explanations in responses. Study 3 compares these modalities with a control using traditional activities. Pre and posttests reveal that the two modalities manifested greater facility with accessing and assembling rules than the control. The dissertation offers implications for the design of learning environments for evolutionary change, design of the two modalities based on their strengths and weaknesses, and teacher training for the same.

  11. Radiometric Measurement Comparisons Using Transfer Radiometers in Support of the Calibration of NASA's Earth Observing System (EOS) Sensors

    NASA Technical Reports Server (NTRS)

    Butler, James J.; Johnson, B. Carol; Brown, Steven W.; Yoon, Howard W.; Barnes, Robert A.; Markham, Brian L.; Biggar, Stuart F.; Zalewski, Edward F.; Spyak, Paul R.; Cooper, John W.; hide

    1999-01-01

    EOS satellite instruments operating in the visible through the shortwave infrared wavelength regions (from 0.4 micrometers to 2.5 micrometers) are calibrated prior to flight for radiance response using integrating spheres at a number of instrument builder facilities. The traceability of the radiance produced by these spheres with respect to international standards is the responsibility of the instrument builder, and different calibration techniques are employed by those builders. The National Aeronautics and Space Administration's (NASA's) Earth Observing System (EOS) Project Science Office, realizing the importance of preflight calibration and cross-calibration, has sponsored a number of radiometric measurement comparisons, the main purpose of which is to validate the radiometric scale assigned to the integrating spheres by the instrument builders. This paper describes the radiometric measurement comparisons, the use of stable transfer radiometers to perform the measurements, and the measurement approaches and protocols used to validate integrating sphere radiances. Stable transfer radiometers from the National Institute of Standards and Technology, the University of Arizona Optical Sciences Center Remote Sensing Group, NASA's Goddard Space Flight Center, and the National Research Laboratory of Metrology in Japan, have participated in these comparisons. The approaches used in the comparisons include the measurement of multiple integrating sphere lamp levels, repeat measurements of select lamp levels, the use of the stable radiometers as external sphere monitors, and the rapid reporting of measurement results. Results from several comparisons are presented. The absolute radiometric calibration standard uncertainties required by the EOS satellite instruments are typically in the +/- 3% to +/- 5% range. Preliminary results reported during eleven radiometric measurement comparisons held between February 1995 and May 1998 have shown the radiance of integrating spheres agreed to within +/- 2.5% from the average at blue wavelengths and to within +/- 1.7% from the average at red and near infrared wavelengths. This level of agreement lends confidence in the use of the transfer radiometers in validating the radiance scales assigned by EOS instrument calibration facilities to their integrating sphere sources.

  12. Landscape Water Budget Tool

    EPA Pesticide Factsheets

    WaterSense created the Water Budget Tool as one option to help builders, landscape professionals, and irrigation professionals certified by a WaterSense labeled program meet the criteria specified in the WaterSense New Home Specification.

  13. 24 CFR 257.102 - Cross-reference.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...; 203.14 Builder's warranty; 203.16 Certificate and contract regarding use of dwelling for transient or hotel purposes; 203.17(d) Maturity; 203.18 Maximum mortgage amounts; 203.18a Solar-energy system; 203...

  14. 24 CFR 257.102 - Cross-reference.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...; 203.14 Builder's warranty; 203.16 Certificate and contract regarding use of dwelling for transient or hotel purposes; 203.17(d) Maturity; 203.18 Maximum mortgage amounts; 203.18a Solar-energy system; 203...

  15. 24 CFR 257.102 - Cross-reference.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...; 203.14 Builder's warranty; 203.16 Certificate and contract regarding use of dwelling for transient or hotel purposes; 203.17(d) Maturity; 203.18 Maximum mortgage amounts; 203.18a Solar-energy system; 203...

  16. 24 CFR 257.102 - Cross-reference.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...; 203.14 Builder's warranty; 203.16 Certificate and contract regarding use of dwelling for transient or hotel purposes; 203.17(d) Maturity; 203.18 Maximum mortgage amounts; 203.18a Solar-energy system; 203...

  17. 24 CFR 257.102 - Cross-reference.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...; 203.14 Builder's warranty; 203.16 Certificate and contract regarding use of dwelling for transient or hotel purposes; 203.17(d) Maturity; 203.18 Maximum mortgage amounts; 203.18a Solar-energy system; 203...

  18. Water Budget Quick Start Guide

    EPA Pesticide Factsheets

    WaterSense created the Water Budget Tool as one option to help builders, landscape professionals, and irrigation professionals certified by a WaterSense labeled program meet the criteria specified in the WaterSense New Home Specification.

  19. 24 CFR 242.41 - Certification of cost requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... shall enter into an agreement in form and content satisfactory to HUD for the purpose of precluding any... disclose its relationship with the builder, including any collateral agreement, and shall agree: (a) To...

  20. 24 CFR 242.41 - Certification of cost requirements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... shall enter into an agreement in form and content satisfactory to HUD for the purpose of precluding any... disclose its relationship with the builder, including any collateral agreement, and shall agree: (a) To...

  1. 24 CFR 242.41 - Certification of cost requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... shall enter into an agreement in form and content satisfactory to HUD for the purpose of precluding any... disclose its relationship with the builder, including any collateral agreement, and shall agree: (a) To...

  2. 24 CFR 242.41 - Certification of cost requirements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... shall enter into an agreement in form and content satisfactory to HUD for the purpose of precluding any... disclose its relationship with the builder, including any collateral agreement, and shall agree: (a) To...

  3. 24 CFR 242.41 - Certification of cost requirements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... shall enter into an agreement in form and content satisfactory to HUD for the purpose of precluding any... disclose its relationship with the builder, including any collateral agreement, and shall agree: (a) To...

  4. 14 CFR 65.101 - Eligibility requirements: General.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Administrator and is specifically designed to qualify the applicant for the job on which the applicant is to be...) This section does not apply to the issuance of a repairman certificate (experimental aircraft builder...

  5. 14 CFR 65.101 - Eligibility requirements: General.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Administrator and is specifically designed to qualify the applicant for the job on which the applicant is to be...) This section does not apply to the issuance of a repairman certificate (experimental aircraft builder...

  6. 14 CFR 65.101 - Eligibility requirements: General.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Administrator and is specifically designed to qualify the applicant for the job on which the applicant is to be...) This section does not apply to the issuance of a repairman certificate (experimental aircraft builder...

  7. Public Notice 2017-25: Accurate Builders & Developers

    EPA Pesticide Factsheets

    EPA is providing notice of a proposed administrative penalty assessment for alleged violations of the Clean Water Act (Act). EPA is also providing notice of opportunity to comment on the proposed penalty assessment.

  8. Production-Built Homes: The Cost Advantages of Smart Growth

    EPA Pesticide Factsheets

    This study identifies the components and techniques of home building in traditional versus conventional developments, and attempts to help production builders better understand the cost differences between the two types of developments.

  9. Measure Guideline. Transitioning to a Tankless Water Heater

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brozyna, K.; Rapport, A.

    2012-09-01

    This measure guideline provides information to help residential builders and retrofitters with the design, specification, selection, implementation, installation, and maintenance issues of transitioning from tank-type water heaters to tankless water heaters.

  10. SRTM Stereo Pair with Landsat Overlay: Los Angeles to San Joaquin Valley, California

    NASA Image and Video Library

    2000-09-21

    California topography poses challenges for road builders. Northwest of Los Angeles, deformation of Earth crust along the Pacific-North American crustal plate boundary has made transportation difficult.

  11. Bridge inspector's manual for movable bridges.

    DOT National Transportation Integrated Search

    1977-01-01

    Importance of Inspection-Movable bridges are built to the rigid specifications : of such groups as the American Association of State Highway and : Transportation Officials (AASHTO), the American Road Builders Association : (ARBA) and Underwriters Lab...

  12. 24 CFR 203.12 - Mortgage insurance on proposed or new construction.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... conditions (i.e., rock formations, unstable soils or slopes, high ground water levels, inadequate surface... of the improvements. The Builder's Certification must be provided to the appraiser for reference...

  13. 24 CFR 203.12 - Mortgage insurance on proposed or new construction.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... conditions (i.e., rock formations, unstable soils or slopes, high ground water levels, inadequate surface... of the improvements. The Builder's Certification must be provided to the appraiser for reference...

  14. 17. DETAIL OF SOUTH PORTAL, SHOWING "TREE OF LIFE" RAILING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. DETAIL OF SOUTH PORTAL, SHOWING "TREE OF LIFE" RAILING DETAIL AS WELL AS BUILDER'S PLATE. - Falls Bridge, Spanning Schuylkill River, connecting East & West River Drives, Philadelphia, Philadelphia County, PA

  15. Technical Solutions to Common Indoor Air Quality Issues in Schools

    EPA Pesticide Factsheets

    Indoor Air Quality (IAQ) Design Tools for Schools provides voluntary guidance for school personnel, architects, engineers, builders and contractors, parents, and the community on key school construction and renovation issues.

  16. Sustainable Management of Construction and Demolition Materials

    EPA Pesticide Factsheets

    This web page discusses how to sustainably manage construction and demolition materials, Information covers, what they are, and how builders, construction crews, demolition teams,and deign practitioners can divert C&D from landfills.

  17. Energy research: accelerator builders eager to aid fusion work.

    PubMed

    Metz, W D

    1976-10-15

    Useful fusion energy may be generated by means of heavy ion accelerator driven implosions if the contraints dictated by the physics and economics of thermonuclear targets and reactors can be satisfied.

  18. System Diagnostic Builder - A rule generation tool for expert systems that do intelligent data evaluation. [applied to Shuttle Mission Simulator

    NASA Technical Reports Server (NTRS)

    Nieten, Joseph; Burke, Roger

    1993-01-01

    Consideration is given to the System Diagnostic Builder (SDB), an automated knowledge acquisition tool using state-of-the-art AI technologies. The SDB employs an inductive machine learning technique to generate rules from data sets that are classified by a subject matter expert. Thus, data are captured from the subject system, classified, and used to drive the rule generation process. These rule bases are used to represent the observable behavior of the subject system, and to represent knowledge about this system. The knowledge bases captured from the Shuttle Mission Simulator can be used as black box simulations by the Intelligent Computer Aided Training devices. The SDB can also be used to construct knowledge bases for the process control industry, such as chemical production or oil and gas production.

  19. The Functional Measurement Experiment Builder suite: two Java-based programs to generate and run functional measurement experiments.

    PubMed

    Mairesse, Olivier; Hofmans, Joeri; Theuns, Peter

    2008-05-01

    We propose a free, easy-to-use computer program that does not requires prior knowledge of computer programming to generate and run experiments using textual or pictorial stimuli. Although the FM Experiment Builder suite was initially programmed for building and conducting FM experiments, it can also be applied for non-FM experiments that necessitate randomized, single, or multifactorial designs. The program is highly configurable, allowing multilingual use and a wide range of different response formats. The outputs of the experiments are Microsoft Excel compatible .xls files that allow easy copy-paste of the results into Weiss's FM CalSTAT program (2006) or any other statistical package. Its Java-based structure is compatible with both Windows and Macintosh operating systems, and its compactness (< 1 MB) makes it easily distributable over the Internet.

  20. Distributed On-line Monitoring System Based on Modem and Public Phone Net

    NASA Astrophysics Data System (ADS)

    Chen, Dandan; Zhang, Qiushi; Li, Guiru

    In order to solve the monitoring problem of urban sewage disposal, a distributed on-line monitoring system is proposed. By introducing dial-up communication technology based on Modem, the serial communication program can rationally solve the information transmission problem between master station and slave station. The realization of serial communication program is based on the MSComm control of C++ Builder 6.0.The software includes real-time data operation part and history data handling part, which using Microsoft SQL Server 2000 for database, and C++ Builder6.0 for user interface. The monitoring center displays a user interface with alarm information of over-standard data and real-time curve. Practical application shows that the system has successfully accomplished the real-time data acquisition from data gather station, and stored them in the terminal database.

  1. Performance Verification of Production-Scalable Energy-Efficient Solutions: Winchester/Camberley Homes Mixed-Humid Climate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mallay, D.; Wiehagen, J.

    2014-07-01

    Winchester/Camberley Homes collaborated with the Building America team Partnership for Home Innovation to develop a new set of high performance home designs that could be applicable on a production scale. The new home designs are to be constructed in the mixed humid climate zone and could eventually apply to all of the builder's home designs to meet or exceed future energy codes or performance-based programs. However, the builder recognized that the combination of new wall framing designs and materials, higher levels of insulation in the wall cavity, and more detailed air sealing to achieve lower infiltration rates changes the moisturemore » characteristics of the wall system. In order to ensure long term durability and repeatable successful implementation with few call-backs, the project team demonstrated through measured data that the wall system functions as a dynamic system, responding to changing interior and outdoor environmental conditions within recognized limits of the materials that make up the wall system. A similar investigation was made with respect to the complete redesign of the HVAC systems to significantly improve efficiency while maintaining indoor comfort. Recognizing the need to demonstrate the benefits of these efficiency features, the builder offered a new house model to serve as a test case to develop framing designs, evaluate material selections and installation requirements, changes to work scopes and contractor learning curves, as well as to compare theoretical performance characteristics with measured results.« less

  2. Building America Case Study: Construction Guidelines for High R-Value Walls without Exterior Rigid Insulation, Cold Climate Region

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    High-R wall assemblies (R-40 and above) are gaining popularity in the market due to programs like the DOE's Zero Energy Ready Home program, Passive House (PH), Net Zero Energy Home (NZEH) challenges in several states, and highly incentivized retrofit programs. In response to this demand, several builders have successfully used 'double wall' systems to more practically achieve higher R-values in thicker, framed walls. To builders of conventional stick-framed homes, often one of the most appealing features of double wall systems is that there are very few new exterior details. Exterior sheathing, structural bracing, house wrap or building paper, window andmore » door flashing, and siding attachment are usually identical to good details in conventional framed wall systems. The information presented in this guide is intended to reduce the risk of failure in these types of assemblies, increase durability, and result in a reduction of material brought to landfills due to failures and resulting decay. While this document focuses on double wall framing techniques, the majority of the information on how to properly construct and finish high R-value assemblies is applicable to all wall assemblies that do not have foam insulation installed on the exterior of the structural sheathing. The techniques presented have been shown through field studies to reduce the likelihood of mold growth and moisture related damage and are intended for builders, framing contractors, architects, and consultants involved in designing and building super insulated homes.« less

  3. Construction Guidelines for High R-Value Walls without Exterior Rigid Insulation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Arena, Lois B.

    High-R wall assemblies (R-40 and above) are gaining popularity in the market due to programs like the DOE's Zero Energy Ready Home program, Passive House (PH), Net Zero Energy Home (NZEH) challenges in several states, and highly incentivized retrofit programs. In response to this demand, several builders have successfully used 'double wall' systems to more practically achieve higher R-values in thicker, framed walls. To builders of conventional stick-framed homes, often one of the most appealing features of double wall systems is that there are very few new exterior details. Exterior sheathing, structural bracing, house wrap or building paper, window andmore » door flashing, and siding attachment are usually identical to good details in conventional framed wall systems. The information presented in this guide is intended to reduce the risk of failure in these types of assemblies, increase durability, and result in a reduction of material brought to landfills due to failures and resulting decay. While this document focuses on double wall framing techniques, the majority of the information on how to properly construct and finish high R-value assemblies is applicable to all wall assemblies that do not have foam insulation installed on the exterior of the structural sheathing. The techniques presented have been shown through field studies to reduce the likelihood of mold growth and moisture related damage and are intended for builders, framing contractors, architects, and consultants involved in designing and building super insulated homes.« less

  4. Ecocity mapping using GIS: introducing a planning method for assessing and improving neighborhood vitality.

    PubMed

    Smith, Richard; Miller, Kirstin

    2013-01-01

    Assessing neighborhood vitality is important to understanding how to improve quality of life and health outcomes. The ecocity model recognizes that cities are part of natural systems and favors walkable neighborhoods. This article introduces ecocity mapping, an innovative planning method, to the public health literature on community engagement by describing a pilot project with a new affordable housing development in Oakland, California between 2007 and 2009. Although ecocity mapping began as a paper technology, advances in geographic information systems (GIS) moved it forward. This article describes how Ecocity Builders used GIS to conduct ecocity mapping to (1) assess vitality of neighborhoods and urban centers to prioritize community health intervention pilot sites and (2) create scenario maps for use in community health planning. From fall 2007 to summer 2008, Ecocity Builders assessed neighborhood vitality using walking distance from parks, schools, rapid transit stops, grocery stores, and retail outlets. In 2008, ecocity maps were shared with residents to create a neighborhood health and sustainability plan. In 2009, Ecocity Builders developed scenario maps to show how changes to the built environment would improve air quality by reducing greenhouse gas emissions from vehicles, while increasing access to basic services and natural amenities. Community organizing with GIS was more useful than GIS alone for final site selection. GIS was useful in mapping scenarios after residents shared local neighborhood knowledge and ideas for change. Residents were interested in long-term environmental planning, provided they could meet immediate needs.

  5. Building America Case Study: Zero Energy Ready Home and the Challenge of Hot Water on Demand, Denver, Colorado

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    "This report outlines the steps a developer can use when looking to create and implement higher performance standards such as the U.S. Department of Energy (DOE) Zero Energy Ready Home (ZERH) standards in a community. The report also describes the specific examples of how this process was followed by a developer, Forest City, in the Stapleton community in Denver, Colorado. IBACOS described the steps used to begin to bring the DOE ZERH standard to the Forest City Stapleton community based on 15 years of community-scale development work done by IBACOS. As a result of this prior IBACOS work, the teammore » gained an understanding of the various components that a master developer needs to consider and created strategies for incorporating those components in the initial phases of development to achieve higher performance buildings in the community. An automated scoring system can be used to perform an internal audit that provides a detailed and consistent evaluation of how several homes under construction or builders' floor plans compare with the requirements of the DOE Zero Energy Ready Home program. This audit can be performed multiple times at specific milestones during construction to allow the builder to make changes as needed throughout construction for the project to meet Zero Energy Ready Home standards. This scoring system also can be used to analyze a builder's current construction practices and design.« less

  6. The Birth of Lepton Colliders in Italy and the United States

    NASA Astrophysics Data System (ADS)

    Paris, Elizabeth

    2003-04-01

    In 1960 the highest center-of-mass energies in particle physics were being achieved via proton synchrotrons utilizing stationary targets. However, efforts were already underway to challenge this hegemony. In addition to Soviet work in Novosibirsk, groups at Stanford University in California and at the Frascati National Laboratories near Rome each had begun original investigation towards one particular type of challenger: colliding beam storage rings. For the group in California, the accomplishment involved creating the potential for feasible experiments. The energetic advantages of the colliding beam configuration had long been accepted - together with its impossibility for realization. The builders of the Princeton-Stanford machine feel that creating usable beams and a reasonable reaction rate is what stood between this concept and its glorious future. For the European builders of AdA, however, the beauty emerges from recognizing the enormous potential inherent in electron-positron annihilations. At least as important for the rise of electron-positron colliders, though, is the role of both of these projects as cultural firsts -- as places where particular sets of physicists got their feet wet associating with beams and beam problems and with the many individuals who were addressing beam problems. The Princeton-Stanford Collider provided experience which its builders would use to move on, functioning as both a technological and political platform for creating what would eventually become SPEAR. For the Roman group, the pursuit of AdA encouraged investigation which applied equally well to their next machine, Adone.

  7. Energy Evaluation of a New Construction Pilot Community: Fresno, California

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Burdick, A.; Poerschke, A.; Rapport, A.

    2014-06-01

    A new construction pilot community was constructed by builder-partner Wathen-Castanos Hybrid Homes (WCHH) based on a single occupied test house that was designed to achieve greater than 30% energy savings with respect to the House Simulation Protocols (Hendron, Robert; Engebrecht, Cheryn (2010). Building America House Simulation Protocols. Golden, CO: National Renewable Energy Laboratory). Builders face several key problems when implementing a whole-house systems integrated measures package (SIMP) from a single test house into multiple houses. Although a technical solution already may have been evaluated and validated in an individual test house, the potential exists for constructability failures at the communitymore » scale. This report addresses factors of implementation and scalability at the community scale and proposes methodologies by which community-scale energy evaluations can be performed based on results at the occupied test house level. Research focused on the builder and trade implementation of a SIMP and the actual utility usage in the houses at the community scale of production. Five occupants participated in this community-scale research by providing utility bills and information on occupancy and miscellaneous gas and electric appliance use for their houses. IBACOS used these utility data and background information to analyze the actual energy performance of the houses. Verification with measured data is an important component in predictive energy modeling. The actual utility bill readings were compared to projected energy consumption using BEopt with actual weather and thermostat set points for normalization.« less

  8. Polycyclic aromatic hydrocarbon exposure and burden of outdoor workers in Budapest.

    PubMed

    Szaniszló, J; Ungváry, G

    2001-03-09

    Polycyclic aromatic hydrocarbons exposure (PAHs: (benz[a]anthracene, benzo[a]pyrene, dibenz[a,h]anthracene, benzo[b]fluoranthene, benzo[k]fluoranthene, indeno[1,2,3-cd]-pyrene, fluoranthene, chrysene, pyrene) of policemen on street duty in downtown Budapest and workers repairing the road (asphalting) at a traffic junction and their excretion of PAH metabolites (1-hydroxypyrene, 3-hydroxybenz[a]anthracene, and 3-hydroxybenzo[a]pyrene) were determined. As controls, health-care workers were investigated. In addition PAH pollution of the air of a factory processing asphalt was also measured. The measurements were performed on air samples gained using personal samplers and from urine of end-shift samples using a high-performance liquid chromatography method. It was found that PAH pollution of the most crowded and busy center of Budapest was similar to that of several other cities in the world. PAH exposure of road builders was actually not higher than that of policemen; the slight difference resulted from diverging life-styles. PAH metabolite excretion of smoking health-care workers, road builders, or policemen significantly exceeded that of the nonsmokers. The PAH metabolite values of the three groups engaged in various activities did not show any difference. It was concluded that cancer-related risk due to PAH compounds in the case of policemen on street duty and road builders (asphalting) does not exceed significantly that of workers not exposed occupationally to PAHs in the ambient air, but that smoking is a decisive factor.

  9. Accessorizing Building Science – A Web Platform to Support Multiple Market Transformation Programs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Madison, Michael C.; Antonopoulos, Chrissi A.; Dowson, Scott T.

    As demand for improved energy efficiency in homes increases, builders need information on the latest findings in building science, rapidly ramping-up energy codes, and technical requirements for labeling programs. The Building America Solution Center is a Department of Energy (DOE) website containing hundreds of expert guides designed to help residential builders install efficiency measures in new and existing homes. Builders can package measures with other media for customized content. Website content provides technical support to market transformation programs such as ENERGY STAR and has been cloned and adapted to provide content for the Better Buildings Residential Program. The Solution Centermore » uses the Drupal open source content management platform to combine a variety of media in an interactive manner to make information easily accessible. Developers designed a unique taxonomy to organize and manage content. That taxonomy was translated into web-based modules that allow users to rapidly traverse structured content with related topics, and media. We will present information on the current design of the Solution Center and the underlying technology used to manage the content. The paper will explore development of features, such as “Field Kits” that allow users to bundle and save content for quick access, along with the ability to export PDF versions of content. Finally, we will discuss development of an Android based mobile application, and a visualization tool for interacting with Building Science Publications that allows the user to dynamically search the entire Building America Library.« less

  10. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Springer, David; German, Alea

    Building cost-effective, high-performance homes that provide superior comfort, health, and durability is the goal of the U.S. Department of Energy’s (DOE’s) Zero Energy Ready Home (ZERH) program. Building America research and other innovative programs throughout the country have addressed many of the technical challenges of building to the ZERH standard. The cost-effectiveness of measure packages that result in 30% source energy savings compared to a code-compliant home have been demonstrated. However, additional challenges remain, particularly with respect to convincing production builders of the strong business case for ZERH. The Alliance for Residential Building Innovation (ARBI) team believes that the keysmore » to successfully engaging builders and developers in the California market are to help them leverage development agreement requirements, code compliance requirements, incentives, and competitive market advantages of ZERH certification, and navigate through this process. A primary objective of this project was to gain a highly visible foothold for residential buildings that are built to the DOE ZERH specification that can be used to encourage participation by other California builders. This report briefly describes two single-family homes that were ZERH certified and focuses on the experience of working with developer Mutual Housing on a 62-unit multifamily community at the Spring Lake subdivision in Woodland, California. The Spring Lake project is expected to be the first ZERH-certified multifamily project in the country. This report discusses the challenges encountered, lessons learned, and how obstacles were overcome.« less

  11. Building America Case Study: Low-Cost Evaluation of Energy Savings at the Community Scale, Fresno, California (Fact Sheet)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    2014-10-01

    A new construction pilot community was constructed by builder-partner Wathen-Castanos Hybrid Homes (WCHH) based on a single occupied test house that was designed to achieve greater than 30% energy savings with respect to the House Simulation Protocols (Hendron, Robert; Engebrecht, Cheryn (2010). Building America House Simulation Protocols. Golden, CO: National Renewable Energy Laboratory.). Builders face several key problems when implementing a whole-house systems integrated measures package (SIMP) from a single test house into multiple houses. Although a technical solution already may have been evaluated and validated in an individual test house, the potential exists for constructability failures at the communitymore » scale. This report addresses factors of implementation and scalability at the community scale and proposes methodologies by which community-scale energy evaluations can be performed based on results at the occupied test house level. Research focused on the builder and trade implementation of a SIMP and the actual utility usage in the houses at the community scale of production. Five occupants participated in this community-scale research by providing utility bills and information on occupancy and miscellaneous gas and electric appliance use for their houses. IBACOS used these utility data and background information to analyze the actual energy performance of the houses. Verification with measured data is an important component in predictive energy modeling. The actual utility bill readings were compared to projected energy consumption using BEopt with actual weather and thermostat set points for normalization.« less

  12. Tunneling : the State of the Industry

    DOT National Transportation Integrated Search

    1976-05-01

    Tunneling is examined as an industry. The demand for its services, the makeup of the industry, some history and its problems and prospects, are analyzed. Industry participants are listed: owners, engineer firms, tunnel builders and specialized suppli...

  13. 24 CFR 234.1 - Cross-reference.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... new construction. 203.14Builders' warranty. 203.18aSolar energy system. 203.18cOne-time or up-front.... 1709) apply to mortgages on individually owned units insured under section 234 of the National Housing...

  14. 24 CFR 234.1 - Cross-reference.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... new construction. 203.14Builders' warranty. 203.18aSolar energy system. 203.18cOne-time or up-front.... 1709) apply to mortgages on individually owned units insured under section 234 of the National Housing...

  15. Local Efforts to Reduce Radon Risks - Highlights and Lessons Learned

    EPA Pesticide Factsheets

    In these stories, you will read about people who educated their families, neighbors, colleagues,and communities, and challenged local builders, governments, code enforcement officials, and others to protect the public from indoor radon.

  16. Rapid Prototyping in Technology Education.

    ERIC Educational Resources Information Center

    Flowers, Jim; Moniz, Matt

    2002-01-01

    Describes how technology education majors are using a high-tech model builder, called a fused deposition modeling machine, to develop their models directly from computer-based designs without any machining. Gives examples of applications in technology education. (JOW)

  17. 38 CFR 36.4347 - Lender Appraisal Processing Program.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...., to the appraisal report must be made in a contrasting color, be clearly legible, and signed and dated... with a real estate firm builder, land developer or escrow agent as a subsidiary division, investment or...

  18. Aviation Careers Series: Flight Attendants

    DOT National Transportation Integrated Search

    1996-01-29

    Over the past 40 years, the American freight movement system became the envy of the world. Transportation builders, the motor carrier industry, and government regulators have all worked to keep goods moving safely and efficiently. Today freight movem...

  19. 38 CFR 36.4526 - Issuance of fund reservation commitments.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... for the making of loans to eligible veterans for the purchase or construction of such dwellings. Such... case in which it determines that the experience or technical qualifications of the builder in respect...

  20. Design methods for muskeg area roads

    DOT National Transportation Integrated Search

    1982-02-01

    The objective of this report was to produce a design guide related to roadway design and construction in organic terrain referred as "Muskeg". The report covers the latest design and construction principles so that the designers, planners, builders a...

  1. Become an Indoor airPLUS Verifier

    EPA Pesticide Factsheets

    With the Indoor airPLUS Program, 3rd-party verifiers help ensure that EPA's high standards, based on leading building science, are applied by the builder during home design and construction to meet the Indoor airPLUS Construction Specifications.

  2. RESIDENTIAL VENTILATION STUDY

    EPA Science Inventory

    This project evaluated the effectiveness, first costs and operational costs of various types of residential ventilation systems in three different climates in the U.S. The Agency, through its Energy Star Program, recommends that builders construct homes that are energy efficient ...

  3. Census Business Builder (CBB)

    Science.gov Websites

    United States Census Bureau Topics Population Latest Information Age and Sex Ancestry Children Mobility Population Estimates Population Projections Race Veterans Economy Latest Information Portal Other Economic Programs Business Latest Information Business Characteristics Classification Codes

  4. 33 CFR 187.317 - What information must be on a certificate of title?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., businesses, and organizations). (2) Address of one individual, business, or organization owning the vessel... manufacturer, builder, or make. (7) Model year, manufacture year, or year built. (8) Overall length. (9) Vessel...

  5. 9. INTERIOR VIEW OF BREW HOUSE, STEAM ENGINE READS: HAMILTON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. INTERIOR VIEW OF BREW HOUSE, STEAM ENGINE- READS: HAMILTON CORLISS ENGINES, THE HOOVEN, OWENS & RENTSCHLER CO., BUILDERS, HAMILTON, OHIO, U.S.A. - August Schell Brewing Company, Twentieth Street South, New Ulm, Brown County, MN

  6. 38 CFR 36.4348 - Servicer Appraisal Processing Program.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., justifications, etc., to the appraisal report must be made in a contrasting color, be clearly legible, and signed... with a real estate firm, builder, land developer or escrow agent as a subsidiary division, or in any...

  7. A New Event Builder for CMS Run II

    NASA Astrophysics Data System (ADS)

    Albertsson, K.; Andre, J.-M.; Andronidis, A.; Behrens, U.; Branson, J.; Chaze, O.; Cittolin, S.; Darlea, G.-L.; Deldicque, C.; Dobson, M.; Dupont, A.; Erhan, S.; Gigi, D.; Glege, F.; Gomez-Ceballos, G.; Hegeman, J.; Holzner, A.; Jimenez-Estupiñán, R.; Masetti, L.; Meijers, F.; Meschi, E.; Mommsen, R. K.; Morovic, S.; Nunez-Barranco-Fernandez, C.; O'Dell, V.; Orsini, L.; Paus, C.; Petrucci, A.; Pieri, M.; Racz, A.; Roberts, P.; Sakulin, H.; Schwick, C.; Stieger, B.; Sumorok, K.; Veverka, J.; Zaza, S.; Zejdl, P.

    2015-12-01

    The data acquisition system (DAQ) of the CMS experiment at the CERN Large Hadron Collider (LHC) assembles events at a rate of 100 kHz, transporting event data at an aggregate throughput of 100GB/s to the high-level trigger (HLT) farm. The DAQ system has been redesigned during the LHC shutdown in 2013/14. The new DAQ architecture is based on state-of-the-art network technologies for the event building. For the data concentration, 10/40 Gbps Ethernet technologies are used together with a reduced TCP/IP protocol implemented in FPGA for a reliable transport between custom electronics and commercial computing hardware. A 56 Gbps Infiniband FDR CLOS network has been chosen for the event builder. This paper discusses the software design, protocols, and optimizations for exploiting the hardware capabilities. We present performance measurements from small-scale prototypes and from the full-scale production system.

  8. CONNJUR Workflow Builder: A software integration environment for spectral reconstruction

    PubMed Central

    Fenwick, Matthew; Weatherby, Gerard; Vyas, Jay; Sesanker, Colbert; Martyn, Timothy O.; Ellis, Heidi J.C.; Gryk, Michael R.

    2015-01-01

    CONNJUR Workflow Builder (WB) is an open-source software integration environment that leverages existing spectral reconstruction tools to create a synergistic, coherent platform for converting biomolecular NMR data from the time domain to the frequency domain. WB provides data integration of primary data and metadata using a relational database, and includes a library of pre-built workflows for processing time domain data. WB simplifies maximum entropy reconstruction, facilitating the processing of non-uniformly sampled time domain data. As will be shown in the paper, the unique features of WB provide it with novel abilities to enhance the quality, accuracy, and fidelity of the spectral reconstruction process. WB also provides features which promote collaboration, education, parameterization, and non-uniform data sets along with processing integrated with the Rowland NMR Toolkit (RNMRTK) and NMRPipe software packages. WB is available free of charge in perpetuity, dual-licensed under the MIT and GPL open source licenses. PMID:26066803

  9. Development of a composite geodetic structure for space construction, phase 1A

    NASA Technical Reports Server (NTRS)

    1980-01-01

    The development of a geodetic beam and beam builder for on orbit construction of large truss type space structures is discussed. The geodetic beam is a lightweight, open lattice structure composed of an equilateral gridwork of crisscrossing rods. The beam provides a high degree of stiffness and minimizes structural distortion, due to temperature gradients, through the incorporation of a new graphite and glass reinforced thermoplastic composite material with a low coefficient of thermal expansion. A low power consuming, high production rate, beam builder automatically fabricates the geodetic beams in space using rods preprocessed on Earth. Three areas of the development are focused upon; (1) geodetic beam designs for local attachment of equipment or beam to beam joining in a parallel or crossing configurations, (2) evaluation of long life pultruded rods capable of service temperatures higher than possible with the HMS/P1700 rod material, and (3) evalaution of high temperature joint encapsulant materials.

  10. A new event builder for CMS Run II

    DOE PAGES

    Albertsson, K.; Andre, J-M; Andronidis, A.; ...

    2015-12-23

    The data acquisition system (DAQ) of the CMS experiment at the CERN Large Hadron Collider (LHC) assembles events at a rate of 100 kHz, transporting event data at an aggregate throughput of 100 GB/s to the high-level trigger (HLT) farm. The DAQ system has been redesigned during the LHC shutdown in 2013/14. The new DAQ architecture is based on state-of-the-art network technologies for the event building. For the data concentration, 10/40 Gbps Ethernet technologies are used together with a reduced TCP/IP protocol implemented in FPGA for a reliable transport between custom electronics and commercial computing hardware. A 56 Gbps Innibandmore » FDR CLOS network has been chosen for the event builder. This paper discusses the software design, protocols, and optimizations for exploiting the hardware capabilities. In conclusion, ee present performance measurements from small-scale prototypes and from the full-scale production system.« less

  11. Validation of Radiometric Standards for the Laboratory Calibration of Reflected-Solar Earth Observing Satellite Instruments

    NASA Technical Reports Server (NTRS)

    Butler, James J.; Johnson, B. Carol; Rice, Joseph P.; Brown, Steven W.; Barnes, Robert A.

    2007-01-01

    Historically, the traceability of the laboratory calibration of Earth-observing satellite instruments to a primary radiometric reference scale (SI units) is the responsibility of each instrument builder. For the NASA Earth Observing System (EOS), a program has been developed using laboratory transfer radiometers, each with its own traceability to the primary radiance scale of a national metrology laboratory, to independently validate the radiances assigned to the laboratory sources of the instrument builders. The EOS Project Science Office also developed a validation program for the measurement of onboard diffuse reflecting plaques, which are also used as radiometric standards for Earth-observing satellite instruments. Summarized results of these validation campaigns, with an emphasis on the current state-of-the-art uncertainties in laboratory radiometric standards, will be presented. Future mission uncertainty requirements, and possible enhancements to the EOS validation program to ensure that those uncertainties can be met, will be presented.

  12. CONNJUR Workflow Builder: a software integration environment for spectral reconstruction.

    PubMed

    Fenwick, Matthew; Weatherby, Gerard; Vyas, Jay; Sesanker, Colbert; Martyn, Timothy O; Ellis, Heidi J C; Gryk, Michael R

    2015-07-01

    CONNJUR Workflow Builder (WB) is an open-source software integration environment that leverages existing spectral reconstruction tools to create a synergistic, coherent platform for converting biomolecular NMR data from the time domain to the frequency domain. WB provides data integration of primary data and metadata using a relational database, and includes a library of pre-built workflows for processing time domain data. WB simplifies maximum entropy reconstruction, facilitating the processing of non-uniformly sampled time domain data. As will be shown in the paper, the unique features of WB provide it with novel abilities to enhance the quality, accuracy, and fidelity of the spectral reconstruction process. WB also provides features which promote collaboration, education, parameterization, and non-uniform data sets along with processing integrated with the Rowland NMR Toolkit (RNMRTK) and NMRPipe software packages. WB is available free of charge in perpetuity, dual-licensed under the MIT and GPL open source licenses.

  13. A PCIe Gen3 based readout for the LHCb upgrade

    NASA Astrophysics Data System (ADS)

    Bellato, M.; Collazuol, G.; D'Antone, I.; Durante, P.; Galli, D.; Jost, B.; Lax, I.; Liu, G.; Marconi, U.; Neufeld, N.; Schwemmer, R.; Vagnoni, V.

    2014-06-01

    The architecture of the data acquisition system foreseen for the LHCb upgrade, to be installed by 2018, is devised to readout events trigger-less, synchronously with the LHC bunch crossing rate at 40 MHz. Within this approach the readout boards act as a bridge between the front-end electronics and the High Level Trigger (HLT) computing farm. The baseline design for the LHCb readout is an ATCA board requiring dedicated crates. A local area standard network protocol is implemented in the on-board FPGAs to read out the data. The alternative solution proposed here consists in building the readout boards as PCIe peripherals of the event-builder servers. The main architectural advantage is that protocol and link-technology of the event-builder can be left open until very late, to profit from the most cost-effective industry technology available at the time of the LHC LS2.

  14. New Whole-House Solutions Case Study: Low-Cost Evaluation of Energy Savings at the Community Scale - Fresno, California

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2014-10-01

    In this project, IBACOS partnered with builder Wathen-Castanos Hybrid Homes to develop a simple and low-cost methodology by which community-scale energy savings can be evaluated based on results at the occupied test house level.Research focused on the builder and trade implementation of a whole-house systems integrated measures package and the actual utility usage in the houses at the community scale of production. Five occupants participated in this community-scale research by providing utility bills and information on occupancy and miscellaneous gas and electric appliance use for their houses. IBACOS used these utility data and background information to analyze the actual energymore » performance of the houses. Verification with measured data is an important component in predictive energy modeling. The actual utility bill readings were compared to projected energy consumption using BEopt with actual weather and thermostat set points for normalization.« less

  15. Performance Verification of Production-Scalable Energy-Efficient Solutions: Winchester/Camberley Homes Mixed-Humid Climate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mallay, D.; Wiehagen, J.

    2014-07-01

    Winchester/Camberley Homes with the Building America program and its NAHB Research Center Industry Partnership collaborated to develop a new set of high performance home designs that could be applicable on a production scale. The new home designs are to be constructed in the mixed humid climate zone four and could eventually apply to all of the builder's home designs to meet or exceed future energy codes or performance-based programs. However, the builder recognized that the combination of new wall framing designs and materials, higher levels of insulation in the wall cavity, and more detailed air sealing to achieve lower infiltrationmore » rates changes the moisture characteristics of the wall system. In order to ensure long term durability and repeatable successful implementation with few call-backs, this report demonstrates through measured data that the wall system functions as a dynamic system, responding to changing interior and outdoor environmental conditions within recognized limits of the materials that make up the wall system. A similar investigation was made with respect to the complete redesign of the heating, cooling, air distribution, and ventilation systems intended to optimize the equipment size and configuration to significantly improve efficiency while maintaining indoor comfort. Recognizing the need to demonstrate the benefits of these efficiency features, the builder offered a new house model to serve as a test case to develop framing designs, evaluate material selections and installation requirements, changes to work scopes and contractor learning curves, as well as to compare theoretical performance characteristics with measured results.« less

  16. Annual Performance Evaluation of a Pair of Energy Efficient Houses (WC3 and WC4) in Oak Ridge, TN

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Biswas, Kaushik; Christian, Jeffrey E; Gehl, Anthony C

    2012-04-01

    Beginning in 2008, two pairs of energy-saver houses were built at Wolf Creek in Oak Ridge, TN. These houses were designed to maximize energy efficiency using new ultra-high-efficiency components emerging from ORNL s Cooperative Research and Development Agreement (CRADA) partners and others. The first two houses contained 3713 square feet of conditioned area and were designated as WC1 and WC2; the second pair consisted of 2721 square feet conditioned area with crawlspace foundation and they re called WC3 and WC4. This report is focused on the annual energy performance of WC3 and WC4, and how they compare against a previouslymore » benchmarked maximum energy efficient house of a similar footprint. WC3 and WC4 are both about 55-60% more efficient than traditional new construction. Each house showcases a different envelope system: WC3 is built with advanced framing featured cellulose insulation partially mixed with phase change materials (PCM); and WC4 house has cladding composed of an exterior insulation and finish system (EIFS). The previously benchmarked house was one of three built at the Campbell Creek subdivision in Knoxville, TN. This house (CC3) was designed as a transformation of a builder house (CC1) with the most advanced energy-efficiency features, including solar electricity and hot water, which market conditions are likely to permit within the 2012 2015 period. The builder house itself was representative of a standard, IECC 2006 code-certified, all-electric house built by the builder to sell around 2005 2008.« less

  17. Combined effects of androgen anabolic steroids and physical activity on the hypothalamic-pituitary-gonadal axis.

    PubMed

    Hengevoss, Jonas; Piechotta, Marion; Müller, Dennis; Hanft, Fabian; Parr, Maria Kristina; Schänzer, Wilhelm; Diel, Patrick

    2015-06-01

    Analysing effects of pharmaceutical substances and training on feedback mechanisms of the hypothalamic-pituitary-gonadal axis may be helpful to quantify the benefit of strategies preventing loss of muscle mass, and in the fight against doping. In this study we analysed combined effects of anabolic steroids and training on the hypothalamic-pituitary-gonadal axis. Therefore intact male Wistar rats were dose-dependently treated with metandienone, estradienedione and the selective androgen receptor modulator (SARM) S-1. In serum cortisol, testosterone, 17β-estradiol (E2), prolactin, inhibin B, follicle-stimulating hormone (FSH), luteinizing hormone (LH), Insulin-like growth factor 1 (IGF-1), and thyroxine (T4) concentrations were determined. Six human volunteers were single treated with 1-androstenedione. In addition abusing and clean body builders were analysed. Serum concentrations of inhibin B, IGF-1, cortisol, prolactin, T4, thyroid-stimulating hormone (TSH), testosterone and LH were determined. In rats, administration of metandienone, estradienedione and S-1 resulted in an increase of muscle fiber diameter. Metandienone and estradienedione but not S-1 administration significantly decreases LH and inhibin B serum concentration. Administration of estradienedione resulted in an increase of E2 and S-1 in an increase of cortisol. Single administration of 1-androstenedione in humans decreased cortisol and inhibin B serum concentrations. LH was not affected. In abusing body builders a significantly decrease of LH, TSH and inhibin B and an increase of prolactin, IGF-1 and T4 was detected. In clean body builders only T4 and TSH were affected. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Ocean acidification causes bleaching and productivity loss in coral reef builders.

    PubMed

    Anthony, K R N; Kline, D I; Diaz-Pulido, G; Dove, S; Hoegh-Guldberg, O

    2008-11-11

    Ocean acidification represents a key threat to coral reefs by reducing the calcification rate of framework builders. In addition, acidification is likely to affect the relationship between corals and their symbiotic dinoflagellates and the productivity of this association. However, little is known about how acidification impacts on the physiology of reef builders and how acidification interacts with warming. Here, we report on an 8-week study that compared bleaching, productivity, and calcification responses of crustose coralline algae (CCA) and branching (Acropora) and massive (Porites) coral species in response to acidification and warming. Using a 30-tank experimental system, we manipulated CO(2) levels to simulate doubling and three- to fourfold increases [Intergovernmental Panel on Climate Change (IPCC) projection categories IV and VI] relative to present-day levels under cool and warm scenarios. Results indicated that high CO(2) is a bleaching agent for corals and CCA under high irradiance, acting synergistically with warming to lower thermal bleaching thresholds. We propose that CO(2) induces bleaching via its impact on photoprotective mechanisms of the photosystems. Overall, acidification impacted more strongly on bleaching and productivity than on calcification. Interestingly, the intermediate, warm CO(2) scenario led to a 30% increase in productivity in Acropora, whereas high CO(2) lead to zero productivity in both corals. CCA were most sensitive to acidification, with high CO(2) leading to negative productivity and high rates of net dissolution. Our findings suggest that sensitive reef-building species such as CCA may be pushed beyond their thresholds for growth and survival within the next few decades whereas corals will show delayed and mixed responses.

  19. Programs That Educate.

    ERIC Educational Resources Information Center

    Kealey, Robert J., Comp.

    The essays in this collection reflect on effective practices conducted in Catholic schools. Essays were written by participants in the 2000 principals' academy. Under "Section 1: Religious Education" are the following essays: "Kingdom Builders" (Sr. M. Joseph); "Sacramental Programs, Parish Programs" (J. Thaler); and…

  20. 7 CFR 1779.2 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Commitment for Guarantee. The Agency's written statement to the lender that the material submitted is..., windstorm, lightning, hail, explosion, riot, civil commotion, aircraft, vehicles, smoke, builder's risk... directly involved in the operation and management of the borrower. Protective advances. Advances made by...

  1. DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    This home is the first manufactured home built to the DOE Zero Energy Ready Home standard and won an Affordable Builder award in the 2014 Housing Innovations Awards. This manufactured home achieved a HERS score of 57 without photovoltaics and includes superior insulation and air sealing.

  2. ARC-2009-ACD09-0186-049

    NASA Image and Video Library

    2009-08-25

    Sustainability Base Ground Breaking ceremony with Steve Zornetzer, Associate Director Ames Research Center, Lt. Governor John Garamendi of California, Jane Grant, Architect AECOM, Pete Worden, Director Ames Research Center, Kenvin Burke, Swinerton Builders Rep. ready to turn the first shovel.

  3. ARC-2009-ACD09-0186-047

    NASA Image and Video Library

    2009-08-25

    Sustainability Base Ground Breaking ceremony with Steve Zornetzer, Associate Director Ames Research Center, Lt. Governor John Garamendi of California, Jane Grant, Architect AECOM, Pete Worden, Director Ames Research Center, Kenvin Burke, Swinerton Builders Rep. ready to turn the first shovel.

  4. ARC-2009-ACD09-0186-044

    NASA Image and Video Library

    2009-08-25

    Sustainability Base Ground Breaking ceremony with Steve Zornetzer, Associate Director Ames Research Center, Lt. Governor John Garamendi of California, Kenvin Burke, Jane Grant, Architect AECOM, Pete Worden, Director Ames Research Center, Swinerton Builders Rep. ready to turn the first shovel.

  5. ARC-2009-ACD09-0186-046

    NASA Image and Video Library

    2009-08-25

    Sustainability Base Ground Breaking ceremony with Steve Zornetzer, Associate Director Ames Research Center, Lt. Governor John Garamendi of California, Jane Grant, Architect AECOM, Pete Worden, Director Ames Research Center, Kenvin Burke, Swinerton Builders Rep. ready to turn the first shovel.

  6. ARC-2009-ACD09-0186-048

    NASA Image and Video Library

    2009-08-25

    Sustainability Base Ground Breaking ceremony with Steve Zornetzer, Associate Director Ames Research Center, Lt. Governor John Garamendi of California, Jane Grant, Architect AECOM, Pete Worden, Director Ames Research Center, Kenvin Burke, Swinerton Builders Rep. ready to turn the first shovel.

  7. Updating RoadHAT : collision diagram builder and HSM elements.

    DOT National Transportation Integrated Search

    2016-01-01

    In order to minimize the losses resulting from traffic crashes, Indiana developed its road safety management methods before the Highway Safety Manual : and the SafetyAnalyst became available. The considerable cost of replacing the Indiana current pra...

  8. 7. ELEVATION OF STREET (NORTH) FACADE FROM DRIVEWAY OF LOWELL'S ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. ELEVATION OF STREET (NORTH) FACADE FROM DRIVEWAY OF LOWELL'S FORMER RESIDENCE. NOTE BUILDERS VERTICALLY ALIGNED STEM OF BOATS WITH CORNER OF HOUSE BEHIND CAMERA POSITION. - Lowell's Boat Shop, 459 Main Street, Amesbury, Essex County, MA

  9. New Whole-House Case Study: William Ryan Homes, Tampa, Florida

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    The builder worked with Consortium for Advanced Residential Buildings to design HERS-65 homes with energy-efficient heat pumps and programmable thermostats with humidity controls, foam-filled concrete block walls, draining house wrap, and airsealed kneewalls.

  10. 75 FR 44954 - Product Cancellation Order for Certain Pesticide Registrations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-30

    ... Bensulide Weedgrass Preventer 000538-00072 Scotts Super Turf Mecoprop-P Builder Plus 2 2,4-D for Grass... H&G Ready Permethrin to Use Insect Control 002724-00694 Pramex 13.3% H&G Permethrin Insect Control...

  11. 77 FR 9111 - YouthBuild Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-15

    ...), the Home Builder's Institute's (HBI) HPACT curriculum, or the Building Trades Multi-Craft Core... citizens, five local and community employment and training organizations, two union organizations, five local YouthBuild programs, two local governments, two Federal agencies, three state governments, one...

  12. New Whole-House Solutions Case Study: Tindall Homes, Columbus, New Jersey

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    The builder worked with IBACOS to build 20 HERS-58 homes with R-49 mixed attic insulation, poly-iso foam in advanced framed walls, precast concrete basement walls with rigid foam, tight airsealing, and HRV

  13. Skeletal Strength and Skeletogenetic Mechanisms Over Phanerozoic Time

    NASA Astrophysics Data System (ADS)

    Constantz, B. R.

    2004-12-01

    Mineralized skeletons have a remarkable range of mechanical properties with respect to strength and durability. Measurements of skeletal mechanical properties show that taxonomic groups with relatively simple, `physiochemically-dominated' modes of mineralization possess skeletal strengths and durabilities that are among the lowest of any known mineralized skeletons. Organisms with relatively sophisticated, `biologically-dominated' modes of mineralization have mechanical properties among the highest values known for any materials. These extraordinarily strong and durable skeletal materials are found in mollusks, echinoderms, vertebrates, and arthropods, which are groups with primarily mobile ecological habits. These skeletons are frequently lightweight, non-massive skeletons with little phenotypic variation. By contrast, dominant reef framework builders and reef sediment formers, with physiochemically-dominated modes of mineralization, have non-mobile ecological habits and construct massive, phenotypically plastic skeletons, possessing extremely poor mechanical properties. Endolithic organisms that further degrade the mechanical properties of the mineralized skeletons of reef builders frequently ravage their massive skeletons. As a result, the skeletons of these groups commonly fragment, and play a central role in reef establishment and maintenance, as they are incorporated in reefal, wave-resistant carbonate buildups. Scleractinian corals have a physiochemically-dominated mode of mineralization and are the dominant modern reef framework builders. Mechanical properties of modern aragonitic scleractinian coral skeletons, tested alive, demonstrate skeletal strengths that are orders of magnitude lower than those seen in mollusks, echinoderms, vertebrates, and arthropods. Rudist bivalves, the dominant reef framework-building group of the Cretaceous, show prolific, massive, highly variable, calcific skeletal elements with structures similar to some reef-forming modern, non-mobile mollusks and the skeletons of other organisms with physiochemically-dominated modes of mineralization. Many aspects of the ecological habits of reef-framework building scleractinians and rudsits are similar, including relatively high skeletal growth rates, which produce massive skeletons and wave-resistant structures with entrapped bioclastic sediments. The principal adaptive role of mineralization in reef framework building groups appears to be the rapid production of massive, brittle, wave-resistant mineralized skeletons. The physiochemically-dominated mode of mineralization of these reef framework builders appears to have made them susceptible to secular variations in Phanerozoic seawater during `calcite' and `aragonite' seas, favoring scleractinians in aragonite seas and rudists during the Cretaceous calcite episode. By contrast, most mobile mollusks, echinoderms, vertebrates, and arthropods appear relatively unaffected by secular variations in seawater chemistry over the Phanerozoic

  14. Bioconstructor Guild Analysis to Assess Maldivian Reefs Following Ocean Warming and Coral Bleaching

    NASA Astrophysics Data System (ADS)

    Bianchi, C. N.; Morri, C.; Montefalcone, M.

    2016-02-01

    Extreme climatic anomalies related to global warming have triggered coral bleaching events across most tropical regions. The hot wave of 1998 El Niño caused mass coral mortality throughout the Indian Ocean. The Maldives has been among the most affected countries, with 60-100% coral mortality reported. Hard coral cover, which dropped to less than 10% after the bleaching, returned to pre-bleaching values of around 50% only by 2014. Between 1997 and 2015, we evaluated the change in cover on Maldivian reef flats of different bioconstructor guilds: i) primary builders are those organisms that build the reef framework and therefore assure reef aggradation; ii) secondary builders provide calcareous material to fill in the frame; iii) binders are encrusters that consolidate the reef edifice; iv) bafflers are soft-bodied algae and colonial invertebrates that, although not actively participating in the bioconstruction, help retaining sediment; v) abiotic attributes (rock, rubble, sand) evidently do not give any contribution to the bioconstruction. A bioconstruction potential index (BCP) was devised using the following formula: BCP = Σin (siCi%) × 100-1where, n is the number of bioconstructor guilds (5, in this case), si is an importance score assigned to the ith guild, and Ci% is the cover of the ith guild. In this study, the value of si has been established at 3 for the primary builders, 2 for the secondary builders, 1 for the binders, 0 for the bafflers, and -1 for the abiotic attributes. Therefore, BCP ranges theoretically from 3, in the unrealistic case of 100% cover by primary constructors, to -1, when only abiotic attributes are present and no bioconstruction is possible, the reef thus being prone to erosion and drowning. When applied to the Maldives data, BCP provided clear threshold values to evaluate constructional capacity. Negative values characterised Maldivian reefs between 1999 and 2003-3007. Values between 0 and 1 depict reefs capable of constratal growth only, and were found 2004-2008 and 2010-2013. Values of BCP greater than 1 are indicative of superstratal growth, and were found in 1997-1998 and again after 2012-2014. Further applications of BCP to other reefs in different regions of the tropical ocean are needed to test how universal this index might be.

  15. A new version of a computer program for dynamical calculations of RHEED intensity oscillations

    NASA Astrophysics Data System (ADS)

    Daniluk, Andrzej; Skrobas, Kazimierz

    2006-01-01

    We present a new version of the RHEED program which contains a graphical user interface enabling the use of the program in the graphical environment. The presented program also contains a graphical component which enables displaying program data at run-time through an easy-to-use graphical interface. New version program summaryTitle of program: RHEEDGr Catalogue identifier: ADWV Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADWV Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Catalogue identifier of previous version: ADUY Authors of the original program: A. Daniluk Does the new version supersede the original program: no Computer for which the new version is designed and others on which it has been tested: Pentium-based PC Operating systems or monitors under which the new version has been tested: Windows 9x, XP, NT Programming language used: Borland C++ Builder Memory required to execute with typical data: more than 1 MB Number of bits in a word: 64 bits Number of processors used: 1 Number of lines in distributed program, including test data, etc.: 5797 Number of bytes in distributed program, including test data, etc.: 588 121 Distribution format: tar.gz Nature of physical problem: Reflection high-energy electron diffraction (RHEED) is a very useful technique for studying growth and surface analysis of thin epitaxial structures prepared by the molecular beam epitaxy (MBE). The RHEED technique can reveal, almost instantaneously, changes either in the coverage of the sample surface by adsorbates or in the surface structure of a thin film. Method of solution: RHEED intensities are calculated within the framework of the general matrix formulation of Peng and Whelan [1] under the one-beam condition. Reasons for the new version: Responding to the user feedback we designed a graphical package that enables displaying program data at run-time through an easy-to-use graphical interface. Summary of revisions:In the present form the code is an object-oriented extension of previous version [2]. Fig. 1 shows the static structure of classes and their possible relationships (i.e. inheritance, association, aggregation and dependency) in the code. The code has been modified and optimized to compile under the C++ Builder integrated development environment (IDE). A graphical user interface (GUI) for the program has been created. The application is a standard multiple document interface (MDI) project from Builder's object repository. The MDI application spawns child window that reside within the client window; the main form contains child object. We have added an original graphical component [3] which has been tested successfully in the C++ Builder programming environment under Microsoft Windows platform. Fig. 2 shows internal structure of the component. This diagram is a graphic presentation of the static view which shows a collection of declarative model elements, such as classes, types, and their relationships. Each of the model elements shown in Fig. 2 is manifested by one header file Graph2D.h, and one code file Graph2D.cpp. Fig. 3 sets the stage by showing the package which supplies the C++ Builder elements used in the component. Installation instructions of the TGraph2D.bpk package can be found in the new distribution. The program has been constructed according to the systems development live cycle (SDLC) methodology [4]. Typical running time: The typical running time is machine and user-parameters dependent. Unusual features of the program: The program is distributed in the form of a main project RHEEDGr.bpr with associated files, and should be compiled using Borland C++ Builder compilers version 5 or later.

  16. Essential Skills for Principals.

    ERIC Educational Resources Information Center

    Terry, Paul M.

    1999-01-01

    No matter what standards they follow, principals must be skilled team builders, instructional leaders, and visionary risk-takers. There are five emerging roles: historian, cheerleader, lightning rod, landscaper (environmental scanner), and anthropologist. To succeed, principals must be empowered by districts, become authentic leaders, and make…

  17. Entrepreneurship. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for entrepreneurship. The list contains units (with and without subunits), competencies, and competency builders that…

  18. Citizen's Guide to Radon: The Guide to Protecting Yourself and Your Family from Radon

    MedlinePlus

    ... Radon: The Guide to Protecting Yourself and Your Family from Radon Contains basic information about Radon in ... Radon Zones and State Contact Information Individuals and Families Radon Publications Home Buyers and Sellers Builders and ...

  19. New Whole-House Solutions Case Study: Pulte Homes, Las Vegas, Nevada

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    2013-09-01

    The builder teamed with Building Science Corporation to design HERS-54 homes with high-efficiency HVAC with ducts in conditioned space, jump ducts, and a fresh air intake; advanced framed walls; low-e windows; and PV roof tiles.

  20. Reviewing and Viewing.

    ERIC Educational Resources Information Center

    Clements, Douglas H., Ed.; And Others

    1988-01-01

    Presents reviews of three software packages. Includes "Cube Builder: A 3-D Geometry Tool," which allows students to build three-dimensional shapes; "Number Master," a multipurpose practice program for whole number computation; and "Safari Search: Problem Solving and Inference," which focuses on decision making in mathematical analysis. (PK)

  1. DOE Zero Energy Ready Home Case Study: Caldwell and Johnson — Church Community and Housing Corporation, Charlestown, RI

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    2014-09-01

    This DOE Zero Energy Ready Home garnered an Affordable Builder award in the 2014 Housing Innovation Awards, for its highly insulated construction, minisplit heat pump and water heater, and triple pane windows.

  2. Inspection and Verification Guidance for WaterSense Labeled New Homes (Version 1.2)

    EPA Pesticide Factsheets

    A new home must be built by a WaterSense builder partner, certified by an EPA licensed certification provider, and meet all of the applicable criteria in the specification to become a WaterSense labeled new home.

  3. Practical Nursing. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for practical nursing. The list contains units (with and without subunits), competencies, and competency builders that…

  4. Dental Assistant. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for dental assistants. The list contains units (with and without subunits), competencies, and competency builders that…

  5. Learning Excitement.

    ERIC Educational Resources Information Center

    Sudore, Gail M.

    1987-01-01

    Provides directions for 18 environmental activities/concepts for adventure programming including games (clam free, habitat lap sit, spirals); warm-ups/stretches (bug tug, stork stretch); trust builders/group initiatives (willow in wind, opossum ferry); low elements (all aboard, trolley); medium elements (rebirth, tire on pole); and high elements…

  6. Carpentry. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains 14 units (with or without subunits), competencies, and competency builders that identify the occupational,…

  7. Psychiatric morbidity in the Chola royal household.

    PubMed

    Somasundaram, Ottilingam

    2013-12-01

    This article deals with the presence of hysterical astasia abasia in the father, and cyclothymic disturbance in the elder brother of the great Chola emperor and builder of the Big Temple at Thanjavur, Raja Raja. Copyright © 2013 Elsevier B.V. All rights reserved.

  8. Masonry. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for masonry occupations. The list contains units (with and without subunits), competencies, and competency builders that…

  9. 75 FR 69141 - Submission for Review: Revision of an Existing Information Collection, USAJOBS

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-10

    ...). 5 CFR 315.611. 5. Veterans Recruitment Appointment (VRA). 5 CFR 307. 5 CFR 316.302(b)(2) Term... OF 612 is incorporated in the online Resume Builder on the USAJOBS Web site. The need to maintain the...

  10. Electrical Trades. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for electrical trades. The list contains units (with and without subunits), competencies, and competency builders that…

  11. SGML by Evolution.

    ERIC Educational Resources Information Center

    Ensign, Chet

    1993-01-01

    Describes how the change to Standard Generalized Markup Language at Information Builders began with the use of SGML-like markup in text because it solved a specific problem. Notes that many additional unexpected benefits led to an investigation of converting to formal SGML-based electronic publishing. (SR)

  12. Success of trees and shrubs in an 18-year-old planting on mine spoil

    Treesearch

    Gary L. Wade; Ralph L. Thompson; Willis G. Vogel; Willis G. Vogel

    1985-01-01

    Reports the status of l&year-old plantings of 25 tree and 25 shrub species on surface-mine spoil. The value of the species for wood products, wildlife habitat, site stabilizers, and soil builders is discussed

  13. Cosmetology. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains 17 units (with or without subunits), competencies, and competency builders that identify the occupational,…

  14. Using Sustainable Development as a Competitive Strategy

    NASA Astrophysics Data System (ADS)

    Spearman, Pat

    Sustainable development reduces construction waste by 43%, generating 50% cost savings. Residential construction executives lacking adequate knowledge regarding the benefits of sustainable development practices are at a competitive disadvantage. Drawing from the diffusion of innovation theory, the purpose of this qualitative case study was to explore knowledge acquisition within the bounds of sustainable residential construction. The purposive sample size of 11 executive decision makers fulfilled the sample size requirements and enabled the extraction of meaningful data. Participants were members of the National Home Builders Association and had experience of a minimum of 5 years in residential construction. The research question addressed how to improve knowledge acquisition relating to the cost benefits of building green homes and increase the adoption rate of sustainable development among residential builders. Data were collected via semistructured telephone interviews, field observation, and document analysis. Transcribed data were validated via respondent validation, coded into 5 initial categories aligned to the focus of the research, then reduced to 3 interlocking themes of environment, competitive advantage, and marketing. Recommendations include developing comprehensive public policies, horizontal and vertical communications networks, and green banks to capitalize sustainable development programs to improve the diffusion of green innovation as a competitive advantage strategy. Business leaders could benefit from this data by integrating sustainable development practices into their business processes. Sustainable development reduces operational costs, increases competitive advantage for builders, and reduces greenhouse gas emissions. Implications for social change increase energy independence through conservation and developing a legislative policy template for comprehensive energy strategies. A comprehensive energy strategy promotes economic development, technological gains in all business sectors within the energy industry, and reduces energy costs for consumers.

  15. Ocean acidification causes bleaching and productivity loss in coral reef builders

    PubMed Central

    Anthony, K. R. N.; Kline, D. I.; Diaz-Pulido, G.; Dove, S.; Hoegh-Guldberg, O.

    2008-01-01

    Ocean acidification represents a key threat to coral reefs by reducing the calcification rate of framework builders. In addition, acidification is likely to affect the relationship between corals and their symbiotic dinoflagellates and the productivity of this association. However, little is known about how acidification impacts on the physiology of reef builders and how acidification interacts with warming. Here, we report on an 8-week study that compared bleaching, productivity, and calcification responses of crustose coralline algae (CCA) and branching (Acropora) and massive (Porites) coral species in response to acidification and warming. Using a 30-tank experimental system, we manipulated CO2 levels to simulate doubling and three- to fourfold increases [Intergovernmental Panel on Climate Change (IPCC) projection categories IV and VI] relative to present-day levels under cool and warm scenarios. Results indicated that high CO2 is a bleaching agent for corals and CCA under high irradiance, acting synergistically with warming to lower thermal bleaching thresholds. We propose that CO2 induces bleaching via its impact on photoprotective mechanisms of the photosystems. Overall, acidification impacted more strongly on bleaching and productivity than on calcification. Interestingly, the intermediate, warm CO2 scenario led to a 30% increase in productivity in Acropora, whereas high CO2 lead to zero productivity in both corals. CCA were most sensitive to acidification, with high CO2 leading to negative productivity and high rates of net dissolution. Our findings suggest that sensitive reef-building species such as CCA may be pushed beyond their thresholds for growth and survival within the next few decades whereas corals will show delayed and mixed responses. PMID:18988740

  16. Reproducible Bioconductor workflows using browser-based interactive notebooks and containers.

    PubMed

    Almugbel, Reem; Hung, Ling-Hong; Hu, Jiaming; Almutairy, Abeer; Ortogero, Nicole; Tamta, Yashaswi; Yeung, Ka Yee

    2018-01-01

    Bioinformatics publications typically include complex software workflows that are difficult to describe in a manuscript. We describe and demonstrate the use of interactive software notebooks to document and distribute bioinformatics research. We provide a user-friendly tool, BiocImageBuilder, that allows users to easily distribute their bioinformatics protocols through interactive notebooks uploaded to either a GitHub repository or a private server. We present four different interactive Jupyter notebooks using R and Bioconductor workflows to infer differential gene expression, analyze cross-platform datasets, process RNA-seq data and KinomeScan data. These interactive notebooks are available on GitHub. The analytical results can be viewed in a browser. Most importantly, the software contents can be executed and modified. This is accomplished using Binder, which runs the notebook inside software containers, thus avoiding the need to install any software and ensuring reproducibility. All the notebooks were produced using custom files generated by BiocImageBuilder. BiocImageBuilder facilitates the publication of workflows with a point-and-click user interface. We demonstrate that interactive notebooks can be used to disseminate a wide range of bioinformatics analyses. The use of software containers to mirror the original software environment ensures reproducibility of results. Parameters and code can be dynamically modified, allowing for robust verification of published results and encouraging rapid adoption of new methods. Given the increasing complexity of bioinformatics workflows, we anticipate that these interactive software notebooks will become as necessary for documenting software methods as traditional laboratory notebooks have been for documenting bench protocols, and as ubiquitous. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com

  17. Not Your Typical Simulation Workshop: Using LEGOs to Train Medical Students on the Practice of Effective Communication.

    PubMed

    Papanagnou, Dimitrios; Lee, Hyunjoo; Rodriguez, Carlos; Zhang, Xiao Chi C; Rudner, Joshua

    2018-01-21

    As students in the health professions transition from the classroom into the clinical environment, they will be expected to effectively communicate with their team members and their patients. Effective communication skills are essential to their ability to effectively contribute to their clinical team and the patient care they deliver. The authors propose an interactive workshop that can support students' deliberate practice of communication skills. The authors designed a simulation workshop that affords students the opportunity to practice their communication and peer-to-peer coaching skills. Using LEGOs, a one-hour workshop was conducted with medical students. Students were divided into groups of two. Each student took on a different role: teacher or builder. Teachers were tasked with instructing builders on how to construct a pre-made LEGO structure, not allowing builders to look at the structure. A group debriefing followed to evaluate the activity and explore the themes that emerged. Twenty first-year medical students and 25 fourth-year medical students participated in this activity. Most groups were successful in reproducing the pre-made structure. Groups that pre-briefed before building were most successful. Unsuccessful groups did not define orientation or direction in mutually understood terms, resulting in the creation of an incorrect mirror image of the structure - a common phenomenon seen during the teaching of procedures in the clinical learning environment. The workshop was well received. Students made requests to have similar sessions throughout their training to better support the development of effective communication skills. The workshop can easily be applied to other specialties to assist with procedural skills instruction or in workshops focusing on effective communication.

  18. Not Your Typical Simulation Workshop: Using LEGOs to Train Medical Students on the Practice of Effective Communication

    PubMed Central

    Lee, Hyunjoo; Rodriguez, Carlos; Zhang, Xiao Chi C; Rudner, Joshua

    2018-01-01

    As students in the health professions transition from the classroom into the clinical environment, they will be expected to effectively communicate with their team members and their patients. Effective communication skills are essential to their ability to effectively contribute to their clinical team and the patient care they deliver. The authors propose an interactive workshop that can support students’ deliberate practice of communication skills. The authors designed a simulation workshop that affords students the opportunity to practice their communication and peer-to-peer coaching skills. Using LEGOs, a one-hour workshop was conducted with medical students. Students were divided into groups of two. Each student took on a different role: teacher or builder. Teachers were tasked with instructing builders on how to construct a pre-made LEGO structure, not allowing builders to look at the structure. A group debriefing followed to evaluate the activity and explore the themes that emerged. Twenty first-year medical students and 25 fourth-year medical students participated in this activity. Most groups were successful in reproducing the pre-made structure. Groups that pre-briefed before building were most successful. Unsuccessful groups did not define orientation or direction in mutually understood terms, resulting in the creation of an incorrect mirror image of the structure – a common phenomenon seen during the teaching of procedures in the clinical learning environment. The workshop was well received. Students made requests to have similar sessions throughout their training to better support the development of effective communication skills. The workshop can easily be applied to other specialties to assist with procedural skills instruction or in workshops focusing on effective communication. PMID:29568715

  19. Interactive Learning Modules: Enabling Near Real-Time Oceanographic Data Use In Undergraduate Education

    NASA Astrophysics Data System (ADS)

    Kilb, D. L.; Fundis, A. T.; Risien, C. M.

    2012-12-01

    The focus of the Education and Public Engagement (EPE) component of the NSF's Ocean Observatories Initiative (OOI) is to provide a new layer of cyber-interactivity for undergraduate educators to bring near real-time data from the global ocean into learning environments. To accomplish this, we are designing six online services including: 1) visualization tools, 2) a lesson builder, 3) a concept map builder, 4) educational web services (middleware), 5) collaboration tools and 6) an educational resource database. Here, we report on our Fall 2012 release that includes the first four of these services: 1) Interactive visualization tools allow users to interactively select data of interest, display the data in various views (e.g., maps, time-series and scatter plots) and obtain statistical measures such as mean, standard deviation and a regression line fit to select data. Specific visualization tools include a tool to compare different months of data, a time series explorer tool to investigate the temporal evolution of select data parameters (e.g., sea water temperature or salinity), a glider profile tool that displays ocean glider tracks and associated transects, and a data comparison tool that allows users to view the data either in scatter plot view comparing one parameter with another, or in time series view. 2) Our interactive lesson builder tool allows users to develop a library of online lesson units, which are collaboratively editable and sharable and provides starter templates designed from learning theory knowledge. 3) Our interactive concept map tool allows the user to build and use concept maps, a graphical interface to map the connection between concepts and ideas. This tool also provides semantic-based recommendations, and allows for embedding of associated resources such as movies, images and blogs. 4) Education web services (middleware) will provide an educational resource database API.

  20. Graphic Communications--Commercial Photography. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for graphic communications--commercial photography. Each unit (with or without subunits) contains competencies and competency builders that identify the…

  1. Business Administration and Management. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains eight units (with or without subunits), competencies, and competency builders that identify the…

  2. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Mixed-Humid Climates; January 2006 - December 2006

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Anderson, R.; Hendron, R.; Eastment, M.

    2006-12-01

    This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Mixed-Humid Climate Region on a cost-neutral basis.

  3. Machine Trades. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for machine trades. Each unit (with or without subunits) contains competencies and competency builders that identify the occupational, academic, and employability…

  4. Welding. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a comprehensive and verified employer competency list for a welding program. It contains units (with or without subunits), competencies, and competency builders that identify the occupational, academic, and employability skills needed…

  5. ORNL takes energy-efficient housing to a new level

    ScienceCinema

    None

    2017-12-09

    Oak Ridge National Laboratory, TVA and the Department of Energy are taking energy-saving research into a West Knox County neighborhood. In the Campbell Creek subdivision, ORNL researchers have helped builders to construct three homes with three different levels of energy-saving features.

  6. New Whole-House Solutions Case Study: Shaw Construction, Aspen, Colorado

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    This builder worked with Building Science Corporation to design affordable HERS-54 townhouses with central solar radiator space heating, PV, R-28 closed-cell spray foam under slab and R-26 in advanced framed walls, and rigid polyiso on inside of basement walls

  7. Dairy Producer. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for dairy producers. Each unit (with or without subunits) contains competencies and competency builders that identify the occupational, academic, and employability…

  8. Nurse Aide. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for nurses' aides. The list contains units (with and without subunits), competencies, and competency builders that identify…

  9. Law Enforcement. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for law enforcement. Each unit (with or without subunits) contains competencies and competency builders that identify the occupational, academic, and employability…

  10. Installing an Integrated System and a Fourth-Generation Language.

    ERIC Educational Resources Information Center

    Ridenour, David; Ferguson, Linda

    1987-01-01

    In the spring of 1986 Indiana State University converted to the Series Z software of Information Associates, an IBM mainframe, and Information Builders' FOCUS fourth-generation language. The beginning of the planning stage to product selection, training, and implementation is described. (Author/MLW)

  11. 46 CFR 68.55 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) or a tank vessel that is a liquefied natural gas carrier that— (i) Was delivered by the builder of... means— (1) Oil, petroleum products, petrochemicals, or liquefied natural gas cargo that is beneficially...) Oil, petroleum products, petrochemicals, or liquefied natural gas cargo not beneficially owned by the...

  12. The Educator's Guide to the Internet: A Handbook with Resources and Activities. Third Edition.

    ERIC Educational Resources Information Center

    Virginia Space Grant Consortium, Hampton.

    This book and available package were developed to introduce educators to the capabilities of the Internet and related telecommunications. Each chapter typically has the following features: "Introduction,""Getting Started,""Confidence Builders,""Common Commands to Master,""Odds and Ends," and…

  13. "Wrapping Up" Your Construction Insurance.

    ERIC Educational Resources Information Center

    Ferraro, Mark

    1998-01-01

    School facility managers are beginning to use a special insurance-management technique called wrap-up. The project owner purchases a bulk construction insurance policy consisting of general liability, excess liability, workers' compensation, and builders' risk insurance. Wrap-ups ensure competitive pricing, safety incentives, lower claims costs,…

  14. Poultry Producer. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a comprehensive and verified employer competency list for a poultry producer program. It contains units (with or without subunits), competencies, and competency builders that identify the occupational, academic, and employability…

  15. Career Builders

    ERIC Educational Resources Information Center

    Weinstein, Margery

    2012-01-01

    While a main goal for corporate trainers traditionally has been to train employees to reach organizational goals, many trainers may find their roles expanding. With companies cutting back on staffing and consolidating multiple job roles into single positions, career development has taken on a much larger significance. At forward-thinking…

  16. Swine Producer. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a comprehensive and verified employer competency list for a swine producer program. It contains units (with or without subunits), competencies, and competency builders that identify the occupational, academic, and employability skills…

  17. Commercial Art. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains 16 units (with or without subunits), competencies, and competency builders that identify the occupational,…

  18. Crop Producer. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains six units (with or without subunits), competencies, and competency builders that identify the occupational,…

  19. Auto Mechanics. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains 11 units (with or without subunits), competencies, and competency builders that identify the occupational,…

  20. Predictive Modeling of a Fecal Indicator at a Subtropical Marine Beach

    EPA Science Inventory

    The Virtual Beach Model Builder (VBMB) is a software tool that can be used to develop predictive models at beaches based on microbial data and observations (explanatory variables) that describe hydrometeorological and biogeochemical conditions. During the summer of 2008, a study...

  1. Building Community through Mentoring Adult Learners

    ERIC Educational Resources Information Center

    Plante, Jarrad; Truitt, Joshua

    2016-01-01

    The Volunteer UCF Community Connectors and Community Builders Program provides a connection between students and their community. The goal is to develop meaningful service opportunities for UCF students that contribute measurable results and systemic change through capacity building among adult learners. The ongoing, sustainable service experience…

  2. Diesel Mechanics. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for diesel mechanics. Each unit (with or without subunits) contains competencies and competency builders that identify the occupational, academic, and employability…

  3. Documenting Student Competence through Effective Performance Assessment: Employability Skills. Workshop Summary.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Agricultural Curriculum Materials Service.

    This report contains 26 performance assessments for documenting student employability skills. Each performance assessment consists of the following: a competency; a terminal performance objective (outcome); competency builders and pupil performance objectives (criteria for documenting mastery of the objective); applied academic competencies;…

  4. 46 CFR 308.402 - Insurance during vessel construction period.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 8 2013-10-01 2013-10-01 false Insurance during vessel construction period. 308.402 Section 308.402 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.402 Insurance during vessel construction period...

  5. 46 CFR 308.402 - Insurance during vessel construction period.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 8 2012-10-01 2012-10-01 false Insurance during vessel construction period. 308.402 Section 308.402 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.402 Insurance during vessel construction period...

  6. 46 CFR 308.401 - Eligibility for insurance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Eligibility for insurance. 308.401 Section 308.401 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.401 Eligibility for insurance. A vessel is eligible for insurance...

  7. 46 CFR 308.401 - Eligibility for insurance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Eligibility for insurance. 308.401 Section 308.401 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.401 Eligibility for insurance. A vessel is eligible for insurance...

  8. 46 CFR 308.404 - Application for insurance.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Application for insurance. 308.404 Section 308.404 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.404 Application for insurance. Application for insurance shall be...

  9. 46 CFR 308.401 - Eligibility for insurance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Eligibility for insurance. 308.401 Section 308.401 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.401 Eligibility for insurance. A vessel is eligible for insurance...

  10. 46 CFR 308.404 - Application for insurance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Application for insurance. 308.404 Section 308.404 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.404 Application for insurance. Application for insurance shall be...

  11. 46 CFR 308.400 - Authority.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Authority. 308.400 Section 308.400 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk... issuance of war risk insurance on American vessels under construction in shipyards in the United States. ...

  12. 46 CFR 308.404 - Application for insurance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 8 2013-10-01 2013-10-01 false Application for insurance. 308.404 Section 308.404 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.404 Application for insurance. Application for insurance shall be...

  13. 46 CFR 308.402 - Insurance during vessel construction period.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Insurance during vessel construction period. 308.402 Section 308.402 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.402 Insurance during vessel construction period...

  14. 46 CFR 308.402 - Insurance during vessel construction period.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Insurance during vessel construction period. 308.402 Section 308.402 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.402 Insurance during vessel construction period...

  15. 46 CFR 308.402 - Insurance during vessel construction period.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Insurance during vessel construction period. 308.402 Section 308.402 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.402 Insurance during vessel construction period...

  16. 46 CFR 308.401 - Eligibility for insurance.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 8 2013-10-01 2013-10-01 false Eligibility for insurance. 308.401 Section 308.401 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.401 Eligibility for insurance. A vessel is eligible for insurance...

  17. 46 CFR 308.404 - Application for insurance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Application for insurance. 308.404 Section 308.404 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.404 Application for insurance. Application for insurance shall be...

  18. 46 CFR 308.401 - Eligibility for insurance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 8 2012-10-01 2012-10-01 false Eligibility for insurance. 308.401 Section 308.401 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.401 Eligibility for insurance. A vessel is eligible for insurance...

  19. 46 CFR 308.404 - Application for insurance.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 8 2012-10-01 2012-10-01 false Application for insurance. 308.404 Section 308.404 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.404 Application for insurance. Application for insurance shall be...

  20. DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    This LEED Platinum home was built on the site of a 60-year-old bungalow that was demolished. It boasts views of Candlewood Lake, a great deal of daylight, and projected annual energy savings of almost $3,000. This home was awarded a 2013 Housing Innovation Award in the custom builder category.

  1. Quantitative Microbial Risk Assessment Tutorial: Installation of Software for Watershed Modeling in Support of QMRA

    EPA Science Inventory

    This tutorial provides instructions for accessing, retrieving, and downloading the following software to install on a host computer in support of Quantitative Microbial Risk Assessment (QMRA) modeling:• SDMProjectBuilder (which includes the Microbial Source Module as part...

  2. Treating Violence in the School through Traditional Martial Arts

    ERIC Educational Resources Information Center

    Kim, Israel

    2004-01-01

    In a comprehensive survey of the literature title "Coping With Violence in the School System," Benbenisti, Astor, and Marachi (2003) map out the programs being deployed throughout the school system today. Those programs listed are "peace builders," "second step," "Richmond's youth against violence,"…

  3. Building America Best Practices Series - High-Performance Home Technologies: Guide to Determining Climate Regions by County

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Baechler, Michael C.; Gilbride, Theresa L.; Cole, Pam C.

    2013-11-01

    This report identifies the climate region of each county in the United States. The report is intended as an aid in helping builders to identify the appropriate climate designation for the counties in which they are building.

  4. Employing mobile technology to improve language skills of young students with language-based disabilities.

    PubMed

    Rodríguez, Cathi Draper; Cumming, Therese M

    2017-01-01

    This exploratory study investigated the effects of a language building iPad application on the language skills (i.e., receptive vocabulary, expressive vocabulary, and sentence formation) of young students with language-based disabilities. The study utilized a pre-test-post-test control group design. Students in the treatment group used the iPad language building application, Language Builder, for 30 minutes a day. Participants were 31 first-grade to third-grade students with identified language-based disabilities. Students were assigned to two groups for the 8-week intervention. Data indicated that students in the treatment group made significantly greater gains in the area of sentence formation than the control group. Results revealed no significant difference between the two groups in the areas of expressive and receptive vocabulary. A short intervention of using Language Builder via the iPad may increase the sentence formation skills of young students with language delays. Additionally, discussion regarding the usefulness of iPad applications in education is presented.

  5. Supplement consumption in body builder athletes

    PubMed Central

    Karimian, Jahangir; Esfahani, Parivash Shekarchizadeh

    2011-01-01

    BACKGROUND: Widespread use of supplements is observed among world athletes in different fields. The aim of this study was to estimate the prevalence and determinants of using supplements among body builder athletes. METHODS: This cross-sectional study was conducted on 250 men and 250 women from 30 different bodybuilding clubs. Participants were asked to complete a self-administered standardized anonymous check-list. RESULTS: Forty nine percent of the respondents declared supplement use. Men were more likely to take supplements than women (86.8% vs. 11.2%, p = 0.001). Reasons for using supplements were reported to be for health (45%), enhancing the immune system (40%) and improving athletic performance (25%). Most athletes (72%) had access to a nutritionist but underused this resource. Coaches (65%) had the greatest influence on supplementation practices followed by nutritionists (30%) and doctors (25%) after them. CONCLUSIONS: The prevalence of supplement use among bodybuilders was high. Sex, health-related issues and sport experts were determinant factors of supplement use. PMID:22973330

  6. Topographic control and accumulation rate of some Holocene coral reefs: south Florida and Dry Tortugas

    USGS Publications Warehouse

    Shinn, E.A.; Hudson, J.H.; Halley, R.B.; Lidz, B.H.; Taylor, D.L.

    1977-01-01

    Core drilling and examination of underwater excavation on 6 reef sites in south Florida and Dry Tortugas revealed that underlying topography is the major factor controlling reef morphology. Carbon-14 dating on coral recovered from cores enables calculation of accumulation rates. Accumulation rates were found to range from 0.38 m/1000 years in thin Holocene reefs to as much as 4.85 m/1000 years in thicker buildups. Cementation and alteration of corals were found to be more pronounced in areas of low buildup rates than in areas of rapid accumulation rates. Acropora palmata, generally considered the major reef builder in Florida, was found to be absent in most reefs drilled. At Dry Tortugas, the more than 13-meter thick Holocene reef did not contain A. palmata. The principal reef builders in this outer reef are the same as those which built the Pleistocene Key Largo formation, long considered to be fossilized patch reef complex.

  7. Strategies for fitting nonlinear ecological models in R, AD Model Builder, and BUGS

    USGS Publications Warehouse

    Bolker, Benjamin M.; Gardner, Beth; Maunder, Mark; Berg, Casper W.; Brooks, Mollie; Comita, Liza; Crone, Elizabeth; Cubaynes, Sarah; Davies, Trevor; de Valpine, Perry; Ford, Jessica; Gimenez, Olivier; Kéry, Marc; Kim, Eun Jung; Lennert-Cody, Cleridy; Magunsson, Arni; Martell, Steve; Nash, John; Nielson, Anders; Regentz, Jim; Skaug, Hans; Zipkin, Elise

    2013-01-01

    1. Ecologists often use nonlinear fitting techniques to estimate the parameters of complex ecological models, with attendant frustration. This paper compares three open-source model fitting tools and discusses general strategies for defining and fitting models. 2. R is convenient and (relatively) easy to learn, AD Model Builder is fast and robust but comes with a steep learning curve, while BUGS provides the greatest flexibility at the price of speed. 3. Our model-fitting suggestions range from general cultural advice (where possible, use the tools and models that are most common in your subfield) to specific suggestions about how to change the mathematical description of models to make them more amenable to parameter estimation. 4. A companion web site (https://groups.nceas.ucsb.edu/nonlinear-modeling/projects) presents detailed examples of application of the three tools to a variety of typical ecological estimation problems; each example links both to a detailed project report and to full source code and data.

  8. Measure Guideline: Implementing a Plenum Truss for a Compact Air Distribution System

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Burdick, A.

    2013-10-01

    This Measure Guideline presents the steps to implement a compact duct system inside an attic bulkhead (plenum truss) of a one-story, slab-on-grade (SOG) home. In a compact duct design, ductwork runs are reduced in length to yield a smaller and more compact duct system. Less energy will be lost through ductwork if the ducts are contained within the thermal enclosure of the house. These measures are intended for the production builder working to meet the 2012 International Energy Conservation Code (IECC) requirements and keep the ductwork within the thermal enclosure of the house. This measure of bringing the heating, ventilationmore » and air conditioning (HVAC) equipment and ductwork within the thermal enclosure of the house is appropriate for the builder wishing to avoid cathedralizing the insulation in the attic space (i.e., locating it at the underside of the roof deck rather than along the attic floor) or adding dropped soffits.« less

  9. Measure Guideline: Implementing a Plenum Truss for a Compact Air Distribution System

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Burdick, A.

    2013-10-01

    This Measure Guideline presents the steps to implement a compact duct system inside an attic bulkhead (plenum truss) of a one-story, slab-on-grade home. In a compact duct design, ductwork runs are reduced in length to yield a smaller and more compact duct system. Less energy will be lost through ductwork if the ducts are contained within the thermal enclosure of the house. These measures are intended for the production builder working to meet the 2012 International Energy Conservation Code (IECC) requirements and keep the ductwork within the thermal enclosure of the house. This measure of bringing the heating, ventilation andmore » air conditioning (HVAC) equipment and ductwork within the thermal enclosure of the house is appropriate for the builder wishing to avoid cathedralizing the insulation in the attic space (i.e., locating it at the underside of the roof deck rather than along the attic floor) or adding dropped soffits.« less

  10. A Dashboard for the Italian Computing in ALICE

    NASA Astrophysics Data System (ADS)

    Elia, D.; Vino, G.; Bagnasco, S.; Crescente, A.; Donvito, G.; Franco, A.; Lusso, S.; Mura, D.; Piano, S.; Platania, G.; ALICE Collaboration

    2017-10-01

    A dashboard devoted to the computing in the Italian sites for the ALICE experiment at the LHC has been deployed. A combination of different complementary monitoring tools is typically used in most of the Tier-2 sites: this makes somewhat difficult to figure out at a glance the status of the site and to compare information extracted from different sources for debugging purposes. To overcome these limitations a dedicated ALICE dashboard has been designed and implemented in each of the ALICE Tier-2 sites in Italy: in particular, it provides a single, interactive and easily customizable graphical interface where heterogeneous data are presented. The dashboard is based on two main ingredients: an open source time-series database and a dashboard builder tool for visualizing time-series metrics. Various sensors, able to collect data from the multiple data sources, have been also written. A first version of a national computing dashboard has been implemented using a specific instance of the builder to gather data from all the local databases.

  11. The Real Time Display Builder (RTDB)

    NASA Technical Reports Server (NTRS)

    Kindred, Erick D.; Bailey, Samuel A., Jr.

    1989-01-01

    The Real Time Display Builder (RTDB) is a prototype interactive graphics tool that builds logic-driven displays. These displays reflect current system status, implement fault detection algorithms in real time, and incorporate the operational knowledge of experienced flight controllers. RTDB utilizes an object-oriented approach that integrates the display symbols with the underlying operational logic. This approach allows the user to specify the screen layout and the driving logic as the display is being built. RTDB is being developed under UNIX in C utilizing the MASSCOMP graphics environment with appropriate functional separation to ease portability to other graphics environments. RTDB grew from the need to develop customized real-time data-driven Space Shuttle systems displays. One display, using initial functionality of the tool, was operational during the orbit phase of STS-26 Discovery. RTDB is being used to produce subsequent displays for the Real Time Data System project currently under development within the Mission Operations Directorate at NASA/JSC. The features of the tool, its current state of development, and its applications are discussed.

  12. 46 CFR 67.70 - Original owner.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Original owner. 67.70 Section 67.70 Shipping COAST GUARD... Acceptable Title Evidence; Waiver § 67.70 Original owner. The builder's certification described in § 67.99 serves as evidence of the original owner's title to a vessel. ...

  13. Order Up

    ERIC Educational Resources Information Center

    Gibeault, Michael

    2005-01-01

    Change orders. The words can turn the stomachs of administrators. Horror stories about change orders create fear and distrust among school officials, designers and builders. Can change orders be avoided? If car manufacturers can produce millions of intricately designed vehicles, why can't the same quality control be achieved on a construction…

  14. Pharmacy Technologist.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of pharmacy technologist, lists technical competencies and competency builders for 16 units pertinent to the health technologies cluster in general as well as those specific to the occupation of pharmacy technologist. The following skill areas…

  15. Quantitative Microbial Risk Assessment Tutorial Installation of Software for Watershed Modeling in Support of QMRA - Updated 2017

    EPA Science Inventory

    This tutorial provides instructions for accessing, retrieving, and downloading the following software to install on a host computer in support of Quantitative Microbial Risk Assessment (QMRA) modeling: • QMRA Installation • SDMProjectBuilder (which includes the Microbial ...

  16. Beyond the Horizon: Developing Future Airpower Strategy

    DTIC Science & Technology

    2014-01-01

    is or becomes more capable, then it is further evidence the USAF failed to proactively usher in these emerging and vital airpower capabilities...USAF airpower. 9. USAF chief of staff, Gen Norton Schwartz, 2009, offered in numerous speeches. 10. Carl H. Builder, The Icarus Syndrome : The Role of

  17. Best Practices Case Study: Imagine Homes - Stillwater Ranch, San Antonio, TX

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    2011-04-01

    This case study describes Imagine Homes, who met Builders Challenge criteria on more than 200 homes in San Antonio with rigid foam exterior sheathing, ducts and air handler in conditioned space in a spray-foam insulated attic, and high-efficiency HVAC, windows, and appliances.

  18. 24 CFR 200.52 - Construction contract.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Construction contract. 200.52 Section 200.52 Housing and Urban Development Regulations Relating to Housing and Urban Development... Construction contract. The form of contract between the mortgagor and builder shall be as prescribed by the...

  19. 24 CFR 200.52 - Construction contract.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Construction contract. 200.52 Section 200.52 Housing and Urban Development Regulations Relating to Housing and Urban Development... Construction contract. The form of contract between the mortgagor and builder shall be as prescribed by the...

  20. 24 CFR 200.52 - Construction contract.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Construction contract. 200.52 Section 200.52 Housing and Urban Development Regulations Relating to Housing and Urban Development... Construction contract. The form of contract between the mortgagor and builder shall be as prescribed by the...

  1. 24 CFR 200.52 - Construction contract.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Construction contract. 200.52 Section 200.52 Housing and Urban Development Regulations Relating to Housing and Urban Development... Construction contract. The form of contract between the mortgagor and builder shall be as prescribed by the...

  2. Respiratory Care Therapist.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of respiratory care therapist, lists technical competencies and competency builders for 18 units pertinent to the health technologies cluster in general as well as those specific to the occupation of respiratory care therapist. The following…

  3. Online Systems for Oversize and Overweight Freight Permitting and Motor Carrier Credentialing : Transportation Research Synthesis.

    DOT National Transportation Integrated Search

    2017-09-01

    MnDOT uses two online systems implemented in the 1990s to issue and manage permits for oversize/overweight (OS/OW) freight and motor carrier credentials: - RouteBuilder, an OS/OW permitting system with a routing component. - Motor Carrier Information...

  4. Radiographer.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of radiographer, lists technical competencies and competency builders for 18 units pertinent to the health technologies cluster in general as well as those specific to the occupation of radiographer. The following skill areas are covered in the…

  5. Histotechnologist.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of histotechnologist, lists technical competencies and competency builders for 13 units pertinent to the health technologies cluster in general as well as those specific to the areas of histology and phlebotomy. The following skill areas are…

  6. Emergency Medical Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of emergency medical technician, lists technical competencies and competency builders for 18 units pertinent to the health technologies cluster in general and 4 units specific to the occupation of emergency medical technician. The following…

  7. 47 CFR 15.23 - Home-built devices.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 1 2014-10-01 2014-10-01 false Home-built devices. 15.23 Section 15.23 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES General § 15.23 Home-built... that the individual builder of home-built equipment may not possess the means to perform the...

  8. 47 CFR 15.23 - Home-built devices.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 1 2012-10-01 2012-10-01 false Home-built devices. 15.23 Section 15.23 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES General § 15.23 Home-built... that the individual builder of home-built equipment may not possess the means to perform the...

  9. 47 CFR 15.23 - Home-built devices.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Home-built devices. 15.23 Section 15.23 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES General § 15.23 Home-built... that the individual builder of home-built equipment may not possess the means to perform the...

  10. 47 CFR 15.23 - Home-built devices.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Home-built devices. 15.23 Section 15.23 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES General § 15.23 Home-built... that the individual builder of home-built equipment may not possess the means to perform the...

  11. 47 CFR 15.23 - Home-built devices.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 1 2013-10-01 2013-10-01 false Home-built devices. 15.23 Section 15.23 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES General § 15.23 Home-built... that the individual builder of home-built equipment may not possess the means to perform the...

  12. Dental Laboratory Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of dental laboratory technician, lists technical competencies and competency builders for 13 units pertinent to the health technologies cluster in general and 8 units to the occupation of dental laboratory technician. The following skill areas…

  13. SDMProjectBuilder: SWAT Simulation and Calibration for Nutrient Fate and Transport

    EPA Science Inventory

    This tutorial reviews screens, icons, and basic functions for downloading flow, sediment, and nutrient observations for a watershed of interest; how to prepare SWAT-CUP input files for SWAT parameter calibration; and how to perform SWAT parameter calibration with SWAT-CUP. It dem...

  14. University Builders.

    ERIC Educational Resources Information Center

    Pearce, Martin

    This publication explores a diverse collection of new university buildings. Ranging from the design of vast new campuses, such as that by Wilford and Stirling at Temasek, Singapore, through to the relatively modest yet strategically important, such as the intervention by Allies and Morrison at Southampton, this book examines the new higher…

  15. Telecommunications Specialist.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This publication contains 17 subjects appropriate for use in a competency list for the occupation of telecommunications specialist, 1 of 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 17 units are as…

  16. Smartphone and Curriculum Opportunities for College Faculty

    ERIC Educational Resources Information Center

    Migdalski, Scott T.

    2017-01-01

    The ever-increasing popularity of the smartphone continues to impact many professions. Physicians use the device for medication dosing, professional drivers use the GPS application, mariners use the navigation maps, builders use materials-estimator applications, property appraisers use the camera capability, and students use the device to search…

  17. Child Care Guidance, Management, and Service. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains seven units (with or without subunits), competencies, and competency builders that identify the…

  18. Auto Body and Fender. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains 10 units (with or without subunits), competencies, and competency builders that identify the occupational,…

  19. Beef and Sheep Producer. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains 11 units (with or without subunits), competencies, and competency builders that identify the occupational,…

  20. Agricultural Business Feed and Grain Worker. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains nine units (with or without subunits), competencies, and competency builders that identify the…

  1. 24 CFR 200.929a - Fair Housing Accessibility Guidelines.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Guidelines. 200.929a Section 200.929a Housing and Urban Development Regulations Relating to Housing and Urban... Fair Housing Accessibility Guidelines. Builders and developers may use the Department's Fair Housing Accessibility Guideline when designing or constructing covered multifamily dwelling units in order to comply...

  2. 7. Detail view of 1866 cornerstone (J.J. Havis and M.F. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Detail view of 1866 cornerstone (J.J. Havis and M.F. Echols, Builders). This cornerstone was moved to the third floor, west elevation of an addition built in 1899. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL

  3. 46 CFR 308.410 - Reporting casualties and filing claims.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Reporting casualties and filing claims. 308.410 Section 308.410 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.410 Reporting casualties and filing claims. Casualties...

  4. 46 CFR 308.410 - Reporting casualties and filing claims.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Reporting casualties and filing claims. 308.410 Section 308.410 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.410 Reporting casualties and filing claims. Casualties...

  5. 46 CFR 308.405 - Form of application.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Form of application. 308.405 Section 308.405 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.405 Form of application. Applications shall be submitted in duplicate and...

  6. 46 CFR 308.410 - Reporting casualties and filing claims.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 8 2013-10-01 2013-10-01 false Reporting casualties and filing claims. 308.410 Section 308.410 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.410 Reporting casualties and filing claims. Casualties...

  7. 46 CFR 308.410 - Reporting casualties and filing claims.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 8 2012-10-01 2012-10-01 false Reporting casualties and filing claims. 308.410 Section 308.410 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.410 Reporting casualties and filing claims. Casualties...

  8. 46 CFR 308.410 - Reporting casualties and filing claims.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Reporting casualties and filing claims. 308.410 Section 308.410 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.410 Reporting casualties and filing claims. Casualties...

  9. Space Construction Automated Fabrication Experiment Definition Study. (SCAFEDS), part 3. Volume 1: Executive summary

    NASA Technical Reports Server (NTRS)

    1979-01-01

    A range of tasks focused on a baseline system concept is discussed. A beam builder concept developed to produce a triangular beam is discussed. Beam elements used laminated graphite and glass composite strip material with external surface coatings are described.

  10. Ohio Agriscience Lesson Plans.

    ERIC Educational Resources Information Center

    Sommers, Robert D., II, Comp.; Waidelich, William D., Comp.

    This document, which is intended for Ohio agriculture teachers, contains lesson plans for an eight-unit competency-based course in agriscience. Each lesson plan contains some or all of the following items: (1) unit title; (2) competency/terminal performance objective; (3) competency builders/pupil performance objectives; (4) list of applied…

  11. Physical Therapist Assistant.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of physical therapist assistant, lists technical competencies and competency builders for 16 units pertinent to the health technologies cluster in general as well as those specific to the occupation of physical therapist assistant. The…

  12. Occupational Therapy Assistant.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of occupational therapy assistant, lists technical competencies and competency builders for 16 units pertinent to the health technologies cluster in general as well as those specific to the occupation of occupational therapy assistant. The…

  13. Medical Laboratory Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of medical laboratory technician, lists technical competencies and competency builders for 18 units pertinent to the health technologies cluster in general and 8 units specific to the occupation of medical laboratory technician. The following…

  14. 13 CFR 120.393 - Are there special application requirements?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Are there special application requirements? 120.393 Section 120.393 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Builders Loan Program § 120.393 Are there special application requirements...

  15. 13 CFR 120.393 - Are there special application requirements?

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 13 Business Credit and Assistance 1 2013-01-01 2013-01-01 false Are there special application requirements? 120.393 Section 120.393 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Builders Loan Program § 120.393 Are there special application requirements...

  16. 13 CFR 120.393 - Are there special application requirements?

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 13 Business Credit and Assistance 1 2012-01-01 2012-01-01 false Are there special application requirements? 120.393 Section 120.393 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Builders Loan Program § 120.393 Are there special application requirements...

  17. 13 CFR 120.393 - Are there special application requirements?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 13 Business Credit and Assistance 1 2014-01-01 2014-01-01 false Are there special application requirements? 120.393 Section 120.393 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Builders Loan Program § 120.393 Are there special application requirements...

  18. 13 CFR 120.393 - Are there special application requirements?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Are there special application requirements? 120.393 Section 120.393 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Builders Loan Program § 120.393 Are there special application requirements...

  19. Macronutrient considerations for the sport of bodybuilding.

    PubMed

    Lambert, Charles P; Frank, Laura L; Evans, William J

    2004-01-01

    Participants in the sport of bodybuilding are judged by appearance rather than performance. In this respect, increased muscle size and definition are critical elements of success. The purpose of this review is to evaluate the literature and provide recommendations regarding macronutrient intake during both 'off-season' and 'pre-contest' phases. Body builders attempt to increase muscle mass during the off-season (no competitive events), which may be the great majority of the year. During the off-season, it is advantageous for the bodybuilder to be in positive energy balance so that extra energy is available for muscle anabolism. Additionally, during the off-season, adequate protein must be available to provide amino acids for protein synthesis. For 6-12 weeks prior to competition, body builders attempt to retain muscle mass and reduce body fat to very low levels. During the pre-contest phase, the bodybuilder should be in negative energy balance so that body fat can be oxidised. Furthermore, during the pre-contest phase, protein intake must be adequate to maintain muscle mass. There is evidence that a relatively high protein intake (approximately 30% of energy intake) will reduce lean mass loss relative to a lower protein intake (approximately 15% of energy intake) during energy restriction. The higher protein intake will also provide a relatively large thermic effect that may aid in reducing body fat. In both the off-season and pre-contest phases, adequate dietary carbohydrate should be ingested (55-60% of total energy intake) so that training intensity can be maintained. Excess dietary saturated fat can exacerbate coronary artery disease; however, low-fat diets result in a reduction in circulating testosterone. Thus, we suggest dietary fats comprise 15-20% of the body builders' off-season and pre-contest diets. Consumption of protein/amino acids and carbohydrate immediately before and after training sessions may augment protein synthesis, muscle glycogen resynthesis and reduce protein degradation. The optimal rate of carbohydrate ingested immediately after a training session should be 1.2 g/kg/hour at 30-minute intervals for 4 hours and the carbohydrate should be of high glycaemic index. In summary, the composition of diets for body builders should be 55-60% carbohydrate, 25-30% protein and 15-20% of fat, for both the off-season and pre-contest phases. During the off-season the diet should be slightly hyperenergetic (approximately 15% increase in energy intake) and during the pre-contest phase the diet should be hypoenergetic (approximately 15% decrease in energy intake).

  20. Building America Industrialized Housing Partnership (BAIHP)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McIlvaine, Janet; Chandra, Subrato; Barkaszi, Stephen

    This final report summarizes the work conducted by the Building America Industrialized Housing Partnership (www.baihp.org) for the period 9/1/99-6/30/06. BAIHP is led by the Florida Solar Energy Center of the University of Central Florida and focuses on factory built housing. In partnership with over 50 factory and site builders, work was performed in two main areas--research and technical assistance. In the research area--through site visits in over 75 problem homes, we discovered the prime causes of moisture problems in some manufactured homes and our industry partners adopted our solutions to nearly eliminate this vexing problem. Through testing conducted in overmore » two dozen housing factories of six factory builders we documented the value of leak free duct design and construction which was embraced by our industry partners and implemented in all the thousands of homes they built. Through laboratory test facilities and measurements in real homes we documented the merits of 'cool roof' technologies and developed an innovative night sky radiative cooling concept currently being tested. We patented an energy efficient condenser fan design, documented energy efficient home retrofit strategies after hurricane damage, developed improved specifications for federal procurement for future temporary housing, compared the Building America benchmark to HERS Index and IECC 2006, developed a toolkit for improving the accuracy and speed of benchmark calculations, monitored the field performance of over a dozen prototype homes and initiated research on the effectiveness of occupancy feedback in reducing household energy use. In the technical assistance area we provided systems engineering analysis, conducted training, testing and commissioning that have resulted in over 128,000 factory built and over 5,000 site built homes which are saving their owners over $17,000,000 annually in energy bills. These include homes built by Palm Harbor Homes, Fleetwood, Southern Energy Homes, Cavalier and the manufacturers participating in the Northwest Energy Efficient Manufactured Home program. We worked with over two dozen Habitat for Humanity affiliates and helped them build over 700 Energy Star or near Energy Star homes. We have provided technical assistance to several show homes constructed for the International builders show in Orlando, FL and assisted with other prototype homes in cold climates that save 40% over the benchmark reference. In the Gainesville Fl area we have several builders that are consistently producing 15 to 30 homes per month in several subdivisions that meet the 30% benchmark savings goal. We have contributed to the 2006 DOE Joule goals by providing two community case studies meeting the 30% benchmark goal in marine climates.« less

  1. Teaching Centers: Toward the State of the Scene.

    ERIC Educational Resources Information Center

    Schmieder, Allen A.; Yarger, Sam J.

    This monograph is intended to: (a) outline the background and current extent of teacher centering in the U.S., (b) stimulate intercenter communication, (c) identify resources for potential program developers, (d) raise some developmental problems and issues confronting center builders, and (e) provide a framework for a systematic analysis of the…

  2. USTC & TBA Guidelines for Tennis Court & Running Track Construction.

    ERIC Educational Resources Information Center

    United States Tennis Court & Track Builders Association.

    Guidelines are presented on tennis court and track and field construction that reflect the latest developments in construction technology, methodology, and practice. Based on contributions from experienced certified tennis court and track builders, material suppliers and design professionals, this manual examines each of the critical areas of…

  3. Financial Management Assistant.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This publication contains 19 subjects appropriate for use in a competency list for the occupation of financial management assistant, 1 of 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 19 units are as…

  4. When Board Relations Are Smooth, Success Is a Breeze.

    ERIC Educational Resources Information Center

    Griffith, Robert

    1990-01-01

    The key to succeeding in superintendent-board relationships is fitting the school board into a three-part framework of policies, meetings, and goals. Advice is also provided concerning budgeting, becoming acquainted with board members, and handling disagreements. A sidebar classifies board members as builders, shopkeepers, mechanics, cheerleaders,…

  5. A Guide for Respiratory Therapy Curriculum Design.

    ERIC Educational Resources Information Center

    American Association for Respiratory Therapy, Dallas, TX.

    The document presents educational criterion upon which curriculum builders can create a competency-based program of respiratory therapy education. The 11 modules presented supplement and compliment the document Delineation of Roles and Functions of Respiratory Therapy Personnel (CE 005 945) which is listed as appendix D but not included as such.…

  6. Web Development Simplified

    ERIC Educational Resources Information Center

    Becker, Bernd W.

    2010-01-01

    The author has discussed the Multimedia Educational Resource for Teaching and Online Learning site, MERLOT, in a recent Electronic Roundup column. In this article, he discusses an entirely new Web page development tool that MERLOT has added for its members. The new tool is called the MERLOT Content Builder and is directly integrated into the…

  7. Stafford Technical Center: Designing a Future for Architects and Builders

    ERIC Educational Resources Information Center

    Lucci, William, Jr.

    2005-01-01

    In this article, the author describes Stafford Technical Center's Engineering Technology Academy (ETA), in which students pursue a variety of educational and career options for anything connected to construction technologies--including drafting and design, architecture, and even work in historic preservation. In addition to technical skills,…

  8. Environment and the Community: An Annotated Bibliography.

    ERIC Educational Resources Information Center

    Department of Housing and Urban Development, Washington, DC.

    Three hundred and nine citations of books, reports, and articles dating from 1964 to 1971 are included in this annotated bibliography, intended as a selection tool for concerned citizens, architects, builders, and city planners emphasizing the environment of American cities and communities. It is topically arranged into sixteen broad sections with…

  9. Expanding Academic Vocabulary with an Interactive On-Line Database

    ERIC Educational Resources Information Center

    Horst, Marlise; Cobb, Tom; Nicolae, Ioana

    2005-01-01

    University students used a set of existing and purpose-built on-line tools for vocabulary learning in an experimental ESL course. The resources included concordance, dictionary, cloze-builder, hypertext, and a database with interactive self-quizzing feature (all freely available at www.lextutor.ca). The vocabulary targeted for learning consisted…

  10. The Goal-Based Scenario Builder: Experiences with Novice Instructional Designers.

    ERIC Educational Resources Information Center

    Bell, Benjamin; Korcuska, Michael

    Creating educational software generally requires a great deal of computer expertise, and as a result, educators lacking such knowledge have largely been excluded from the design process. Recently, researchers have been designing tools for automating some aspects of building instructional applications. These tools typically aim for generality,…

  11. Space fabrication demonstration system

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The lower right aluminum beam cap roll forming mill was delivered and installed in the beam builder. The beam was brought to full operational status and beams of one to six bay lengths were produced to demonstrate full system capability. Although the cap flange waviness problem persists, work is progressing within cost and schedule.

  12. Generic School Grounds Design Brief.

    ERIC Educational Resources Information Center

    Dorset County Council, Dorchester (England).

    This document was produced to provide architects, planners, and builders with an educational design brief for Dorset, England school grounds. The County Education Planning and Development Department will use it as an educational and curriculum statement to complement their more detailed and specific building briefs. The brief uses many of the…

  13. Schooling Taiwan's Aboriginal Baseball Players for the Nation

    ERIC Educational Resources Information Center

    Yu, Junwei; Bairner, Alan

    2010-01-01

    One of the major challenges that faces nation-builders in postcolonial societies is the incorporation of subaltern groups, particularly aboriginal peoples, into a collective national project. One vehicle for addressing this challenge is sport with schools being amongst the most important venues. This article offers an empirical study of the role…

  14. Computer Programmer/Analyst.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This publication contains 25 subjects appropriate for use in a competency list for the occupation of computer programmer/analyst, 1 of 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 25 units are as…

  15. ABC's of Construction. Final Report.

    ERIC Educational Resources Information Center

    Greater Baton Rouge Chamber of Commerce, LA.

    The ABC's of Construction project was a demonstration project designed to integrate basic skills training with an industry-developed vocational-craft training program. The program was located at the central training facility of the Pelican Chapter of Associated Builders and Contractors (ABC), an organization made up of nearly 300 member companies…

  16. 77 FR 30306 - Notice of Proposed Information Collection: Comment Request; Request for Acceptance of Changes in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-22

    ... Information Collection: Comment Request; Request for Acceptance of Changes in Approved Drawings and... also lists the following information: Title of Proposal: Changes in Approved Drawings and... proposed use: Builders who request changes to HUD's accepted drawings and specifications for proposed...

  17. Parkitecture: Search and Discover the Architectural Elements in Balboa Park.

    ERIC Educational Resources Information Center

    Mertz, Susan Jeanne

    The original buildings in San Diego's (California) Balboa Park, were planned for the 1915-1916 Panama-California Exposition. Loosely designed in the Spanish Colonial Revival Style, local builders and craftsmen added their own interpretation by using materials found locally in Southern California and freely applying traditional architectural…

  18. 13 CFR 120.200 - What bonding requirements exist during construction?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What bonding requirements exist during construction? 120.200 Section 120.200 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION... percent payment and performance bond and builder's risk insurance, unless waived by SBA. Limitations on...

  19. New Technology's Surprising Security Threats. Building Digital Libraries

    ERIC Educational Resources Information Center

    Huwe, Terence

    2005-01-01

    In recent years, security issues have increasingly come to dominate the technological development process--although still in a more reactive than proactive mode. It now seems more important than ever to monitor security trends and policy developments, especially if technology is regarded as a potential community builder. This article suggests…

  20. 78 FR 58089 - California State Nonroad Engine Pollution Control Standards; Off-Road Compression Ignition...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-20

    ..., when presented to the Administrator are presumed to satisfy the waiver requirements and that the burden... (Hearing Transcript). EPA received testimony from CARB, the Pacific Legal Foundation (PLF), the American... Construction Trucking Association (CCTA)--EPA-HQ-OAR- 2008-0691-0309; American Road & Transportation Builders...

  1. Fertilizer/Chemical Sales and Service Worker. Ohio's Competency Analysis Profile.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for fertilizer/chemical sales and service workers. Each unit (with or without subunits) contains competencies and competency builders that identify the occupational,…

  2. Building Face Composites Can Harm Lineup Identification Performance

    ERIC Educational Resources Information Center

    Wells, Gary L.; Charman, Steve D.; Olson, Elizabeth A.

    2005-01-01

    Face composite programs permit eyewitnesses to build likenesses of target faces by selecting facial features and combining them into an intact face. Research has shown that these composites are generally poor likenesses of the target face. Two experiments tested the proposition that this composite-building process could harm the builder's memory…

  3. Replicating the AC-130’s Urban Close Air Support Capabilities Around the Clock

    DTIC Science & Technology

    2006-12-15

    Each employs four Allison T56 -15 turbo-prop engines, dual-wheel construction, steerable nose gear, two tandem-mounted main retractable landing gear...Primary Function: Close air support, air interdiction and force protection Builder: Lockheed/Boeing Corp. Power Plant: Four Allison T56 -A-15

  4. 7 CFR 1924.6 - Performing development work.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 12 2011-01-01 2011-01-01 false Performing development work. 1924.6 Section 1924.6... Performing development work. All construction work will be performed by one, or a combination, of the following methods: Contract, borrower, mutual self-help, or owner-builder. All development work must be...

  5. Information Support Specialist.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This publication contains 22 subjects appropriate for use in a competency list for the occupation of information support specialist, 1 of occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 22 units are as…

  6. Network Systems Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This publication contains 17 subjects appropriate for use in a competency list for the occupation of network systems technician, 1 of 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 17 units are as follows:…

  7. Computer (PC/Network) Coordinator.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This publication contains 22 subjects appropriate for use in a competency list for the occupation of computer (PC/network) coordinator, 1 of 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 22 units are as…

  8. Simulation Modeling of Advanced Pilot Training: The Effects of a New Aircraft Family of Systems

    DTIC Science & Technology

    2014-03-01

    baseline requirements disqualifies itself from further consideration. The next phase of competition involves adjusting the total proposed price by...submodels, the previous submodel provided the framework for the following submodel. This copy-and-paste process forced the model builder to inspect each

  9. Training Civic Bridge Builders: Outcomes of Community Leadership Development Programs

    ERIC Educational Resources Information Center

    Keating, Kari Hall

    2011-01-01

    As rural communities experience rapid economic, demographic, and political change, program interventions that focus on the development of community leadership capacity could be valuable. Community leadership development programs have been deployed in rural U.S. communities for the past 30 years by university extension units, chambers of commerce,…

  10. The Law of Federal Labor-Management Relations

    DTIC Science & Technology

    1993-11-01

    is not only proper, but may be construed as an obligation of agency management. Agencies should be concerned with the maximum exercise of the franchise ...543 (1964). Operating Engineers, Local 150 v. Flair Builders, Inc., 406 U.S. 487 (1972). Nolde Brothers, Inc. v. Bakery Workers, Local 358, 430 U.S

  11. ARC-2010-ACD10-0037-165

    NASA Image and Video Library

    2010-08-03

    Construction of the new NASA Ames Green Building dubbed Sustainability Base located on the Ames Research Center campus at Moffett Field, CA. Construction Sign. 'Future home of for NASA's Collaborative Support Facility' in partnership with AECOM & William McDonough + Partners and Swinerton Builders ....Sustainability Base ..window to the future on Earth.

  12. 78 FR 44895 - Energy Conservation Program for Consumer Products: First Co. Petition for Reconsideration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-25

    ... lead times. Architects, engineers and builders often select HVAC systems for such projects up to 9-12... through the Compliance, Certification Management System (``CCMS'') as part of annual certification... System (``CCMS'') as part of annual certification reporting requirements; and (ii) publish the...

  13. 46 CFR 91.20-10 - Plans.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Plans. 91.20-10 Section 91.20-10 Shipping COAST GUARD... Initial Inspection § 91.20-10 Plans. (a) Before application for inspection is made, and before construction is started, the owner or builder shall have plans approved by the Commandant indicating the...

  14. 46 CFR 126.330 - Plans.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Plans. 126.330 Section 126.330 Shipping COAST GUARD... Inspection § 126.330 Plans. Before construction starts, the owner, operator, or builder shall develop plans indicating the proposed arrangement and construction of the vessel. (The list of plans to be developed and...

  15. 46 CFR 189.20-10 - Plans.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Plans. 189.20-10 Section 189.20-10 Shipping COAST GUARD... Initial Inspection § 189.20-10 Plans. (a) Before application for inspection is made, and before construction is started, the owner or builder shall have plans approved by the Commandant indicating the...

  16. CNC Turning Technician. A Competency-Based Instructional System.

    ERIC Educational Resources Information Center

    Sloan, Kelly; Hilley, Robert

    This competency-based curriculum guide for instructing students in using computer numerically controlled (CNC) turning machines is one of a series of instructional guides for the machinist field developed in Oklahoma. Although developed jointly with Baxter Technologies Corporation and oriented toward the Baxter Vo-Tec 2000 Future Builder CNC…

  17. Registered Nurse (Associate Degree).

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of registered nurse (with an associate degree), lists technical competencies and competency builders for 19 units pertinent to the health technologies cluster in general and 5 units specific to the occupation of registered nurse. The following…

  18. Analysis of "The Wonderful Desert." Technical Report No. 170.

    ERIC Educational Resources Information Center

    Green, G. M.; And Others

    This report presents a text analysis of "The Wonderful Desert," a brief selection from the "Reader's Digest Skill Builder" series. (The techniques used in arriving at the analysis are presented in a Reading Center Technical Report, Number 168, "Problems and Techniques of Text Analysis.") Tables are given for a…

  19. DOE ZERH Case Study: Sunroc Builders, Bates Avenue, Lakeland, FL

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning affordable home in the hot-humid climate that got HERS 57 without PV, with 6.5” SIP walls and 8.25” SIP roof; uninsulated slab foundation; fresh air intake; SEER 16 ducted air source heat pump.

  20. Management Information Specialist.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This publication contains 19 subjects appropriate for use in a competency list for the occupation of management information specialist, 1 of 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 19 units are as…

  1. The Great Pyramid Builders: An Integrated Theme on Ancient Egypt

    ERIC Educational Resources Information Center

    Stone, Brian

    2008-01-01

    This article describes a themed classroom project designed to teach about the culture and civilization of ancient Egypt. In preparing the project, it is noted that teachers should remember that different learning styles, including activities that provide meaningful experiences, are appropriate in accommodating the various ways children learn.…

  2. Stafford Technical Center: Designing a Future for Architects and Builders

    ERIC Educational Resources Information Center

    Lucci, William, Jr.

    2005-01-01

    The Engineering Technology Academy (ETA) program at Stafford Technical Center in Rutland, Vermont, offers benefits beyond the conventional high school learning experience. In September, at the beginning of the program, students learn the traditional skills of using tools, line weights and lettering. Once they develop these basic skills, students…

  3. 46 CFR 308.406 - Issuance of policies; terms and conditions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 8 2013-10-01 2013-10-01 false Issuance of policies; terms and conditions. 308.406 Section 308.406 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.406 Issuance of policies; terms and conditions...

  4. 46 CFR 308.406 - Issuance of policies; terms and conditions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Issuance of policies; terms and conditions. 308.406 Section 308.406 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.406 Issuance of policies; terms and conditions...

  5. 46 CFR 308.406 - Issuance of policies; terms and conditions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 8 2012-10-01 2012-10-01 false Issuance of policies; terms and conditions. 308.406 Section 308.406 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.406 Issuance of policies; terms and conditions...

  6. 46 CFR 308.400 - Authority.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 8 2012-10-01 2012-10-01 false Authority. 308.400 Section 308.400 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk... section 1202(a) of the Act authorized, (46 App. U.S.C. 1982(a)) has authorized the issuance of war risk...

  7. 46 CFR 308.406 - Issuance of policies; terms and conditions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Issuance of policies; terms and conditions. 308.406 Section 308.406 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.406 Issuance of policies; terms and conditions...

  8. 46 CFR 308.406 - Issuance of policies; terms and conditions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Issuance of policies; terms and conditions. 308.406 Section 308.406 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.406 Issuance of policies; terms and conditions...

  9. 46 CFR 308.400 - Authority.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Authority. 308.400 Section 308.400 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk... section 1202(a) of the Act authorized, (46 App. U.S.C. 1982(a)) has authorized the issuance of war risk...

  10. 46 CFR 308.400 - Authority.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Authority. 308.400 Section 308.400 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk... section 1202(a) of the Act authorized, (46 App. U.S.C. 1982(a)) has authorized the issuance of war risk...

  11. 46 CFR 308.400 - Authority.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 8 2013-10-01 2013-10-01 false Authority. 308.400 Section 308.400 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk... section 1202(a) of the Act authorized, (46 App. U.S.C. 1982(a)) has authorized the issuance of war risk...

  12. Building Whole People, Whole Organizations, and Whole Communities

    ERIC Educational Resources Information Center

    Mittelstet, Stephen K.

    2009-01-01

    Gandhi's inspiration, true for the individual, is also true for the lives of the higher education institutions, especially if they intend their students to be builders of sustainable local and world community, characterized by social equity and justice, economic sufficiency, and a healthy environment. If how presidents conduct their institutions…

  13. Computer Support Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This publication contains 18 subjects appropriate for use in a competency list for the occupation of computer support technician, 1 of 12 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 18 units are as…

  14. Microcomputer Applications Specialist.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This publication contains 16 subjects appropriate for use in a competency list for the occupation of microcomputer applications specialist, 1 of 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 16 units are…

  15. Information Liability--New Interpretations for Electronic Publishing.

    ERIC Educational Resources Information Center

    Tarter, Blodwen

    1986-01-01

    Defines the issue of information liability as it applies to electronic information and suggests ways in which the issue can be addressed and resolved. Discussion of the marketing and legal aspects of the question includes impact of the Dun & Bradstreet Inc. vs. Greenmoss Builders Inc. ruling on libel litigation. (EM)

  16. Sarbalap! Words.

    ERIC Educational Resources Information Center

    Cantu, Virginia, Comp.; And Others

    Prepared by bilingual teacher aide students, this glossary provides the Spanish translation of about 1,300 English words used in the bilingual classroom. Intended to serve as a handy reference for teachers, teacher aides, and students, the glossary can also be used in teacher training programs as a vocabulary builder for future bilingual teachers…

  17. Precision Machining. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). 2002 Revision.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

    This publication provided the competencies and key indicators for a program that enables students to prepare for a number of occupations within the broader metalworking industry. Specializations include machinist, computer numerical control programmers, and maintenance and machine builders. Competencies and the related key indicators are presented…

  18. 76 FR 52362 - Submission for Review: Revision of an Existing Information Collection, USAJOBS

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-22

    ... Federal jobs and employment information. The Applicant Profile and Resume Builder are two components of... Federal Government to assess an applicant's qualifications for Federal jobs under the authority of... and job seekers, consistent with the goals of Federal hiring reform. (B) Revise the collection of...

  19. 76 FR 36581 - Submission for Review: Revision of an Existing Information Collection, USAJOBS

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-22

    ... jobs and employment information. The Applicant Profile and Resume Builder are two components of the... Government to assess an applicant's qualifications for Federal jobs under the authority of sections 1104... for both Federal agencies and job seekers, consistent with the goals of Federal hiring reform. (B...

  20. Housing Modifications for Persons Who Are Blind or Visually Impaired.

    ERIC Educational Resources Information Center

    Cocke, Elizabeth A.

    1992-01-01

    This paper outlines housing modification issues for both the housing consumer with visual impairments and the builder/remodeler, with emphasis on single-family housing. Suggested modifications are listed for the exterior, entrance, elevator, doors, floors, lighting and the electrical system, windows, room layout and shape, kitchen, and stairs and…

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top