Sample records for building code compliance

  1. 44 CFR 71.4 - Documentation.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... evidence that the structure was not in compliance with the building code at the time it was built; and (2... evidence that the structure was not in compliance with the building code at the time it was built; and (2... structure and found no evidence that the structure was not in compliance with the building code at the time...

  2. 44 CFR 71.4 - Documentation.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... evidence that the structure was not in compliance with the building code at the time it was built; and (2... evidence that the structure was not in compliance with the building code at the time it was built; and (2... structure and found no evidence that the structure was not in compliance with the building code at the time...

  3. 44 CFR 71.4 - Documentation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... evidence that the structure was not in compliance with the building code at the time it was built; and (2... evidence that the structure was not in compliance with the building code at the time it was built; and (2... structure and found no evidence that the structure was not in compliance with the building code at the time...

  4. 44 CFR 71.4 - Documentation.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... evidence that the structure was not in compliance with the building code at the time it was built; and (2... evidence that the structure was not in compliance with the building code at the time it was built; and (2... structure and found no evidence that the structure was not in compliance with the building code at the time...

  5. 44 CFR 71.4 - Documentation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... evidence that the structure was not in compliance with the building code at the time it was built; and (2... evidence that the structure was not in compliance with the building code at the time it was built; and (2... structure and found no evidence that the structure was not in compliance with the building code at the time...

  6. Assessing Potential Energy Cost Savings from Increased Energy Code Compliance in Commercial Buildings

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosenberg, Michael I.; Hart, Philip R.; Athalye, Rahul A.

    The US Department of Energy’s most recent commercial energy code compliance evaluation efforts focused on determining a percent compliance rating for states to help them meet requirements under the American Recovery and Reinvestment Act (ARRA) of 2009. That approach included a checklist of code requirements, each of which was graded pass or fail. Percent compliance for any given building was simply the percent of individual requirements that passed. With its binary approach to compliance determination, the previous methodology failed to answer some important questions. In particular, how much energy cost could be saved by better compliance with the commercial energymore » code and what are the relative priorities of code requirements from an energy cost savings perspective? This paper explores an analytical approach and pilot study using a single building type and climate zone to answer those questions.« less

  7. Developing Performance Cost Index Targets for ASHRAE Standard 90.1 Appendix G – Performance Rating Method

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosenberg, Michael I.; Hart, Philip R.

    2016-02-16

    Appendix G, the Performance Rating Method in ASHRAE Standard 90.1 has been updated to make two significant changes for the 2016 edition, to be published in October of 2016. First, it allows Appendix G to be used as a third path for compliance with the standard in addition to rating beyond code building performance. This prevents modelers from having to develop separate building models for code compliance and beyond code programs. Using this new version of Appendix G to show compliance with the 2016 edition of the standard, the proposed building design needs to have a performance cost index (PCI)more » less than targets shown in a new table based on building type and climate zone. The second change is that the baseline design is now fixed at a stable level of performance set approximately equal to the 2004 code. Rather than changing the stringency of the baseline with each subsequent edition of the standard, compliance with new editions will simply require a reduced PCI (a PCI of zero is a net-zero building). Using this approach, buildings of any era can be rated using the same method. The intent is that any building energy code or beyond code program can use this methodology and merely set the appropriate PCI target for their needs. This report discusses the process used to set performance criteria for compliance with ASHRAE Standard 90.1-2016 and suggests a method for demonstrating compliance with other codes and beyond code programs.« less

  8. Developing Performance Cost Index Targets for ASHRAE Standard 90.1 Appendix G – Performance Rating Method - Rev.1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosenberg, Michael I.; Hart, Philip R.

    2016-03-01

    Appendix G, the Performance Rating Method in ASHRAE Standard 90.1 has been updated to make two significant changes for the 2016 edition, to be published in October of 2016. First, it allows Appendix G to be used as a third path for compliance with the standard in addition to rating beyond code building performance. This prevents modelers from having to develop separate building models for code compliance and beyond code programs. Using this new version of Appendix G to show compliance with the 2016 edition of the standard, the proposed building design needs to have a performance cost index (PCI)more » less than targets shown in a new table based on building type and climate zone. The second change is that the baseline design is now fixed at a stable level of performance set approximately equal to the 2004 code. Rather than changing the stringency of the baseline with each subsequent edition of the standard, compliance with new editions will simply require a reduced PCI (a PCI of zero is a net-zero building). Using this approach, buildings of any era can be rated using the same method. The intent is that any building energy code or beyond code program can use this methodology and merely set the appropriate PCI target for their needs. This report discusses the process used to set performance criteria for compliance with ASHRAE Standard 90.1-2016 and suggests a method for demonstrating compliance with other codes and beyond code programs.« less

  9. Building Energy Efficiency in India: Compliance Evaluation of Energy Conservation Building Code

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yu, Sha; Evans, Meredydd; Delgado, Alison

    India is experiencing unprecedented construction boom. The country doubled its floorspace between 2001 and 2005 and is expected to add 35 billion m2 of new buildings by 2050. Buildings account for 35% of total final energy consumption in India today, and building energy use is growing at 8% annually. Studies have shown that carbon policies will have little effect on reducing building energy demand. Chaturvedi et al. predicted that, if there is no specific sectoral policies to curb building energy use, final energy demand of the Indian building sector will grow over five times by the end of this century,more » driven by rapid income and population growth. The growing energy demand in buildings is accompanied by a transition from traditional biomass to commercial fuels, particularly an increase in electricity use. This also leads to a rapid increase in carbon emissions and aggravates power shortage in India. Growth in building energy use poses challenges to the Indian government. To curb energy consumption in buildings, the Indian government issued the Energy Conservation Building Code (ECBC) in 2007, which applies to commercial buildings with a connected load of 100 kW or 120kVA. It is predicted that the implementation of ECBC can help save 25-40% of energy, compared to reference buildings without energy-efficiency measures. However, the impact of ECBC depends on the effectiveness of its enforcement and compliance. Currently, the majority of buildings in India are not ECBC-compliant. The United Nations Development Programme projected that code compliance in India would reach 35% by 2015 and 64% by 2017. Whether the projected targets can be achieved depends on how the code enforcement system is designed and implemented. Although the development of ECBC lies in the hands of the national government – the Bureau of Energy Efficiency under the Ministry of Power, the adoption and implementation of ECBC largely relies on state and local governments. Six years after ECBC’s enactment, only two states and one territory out of 35 Indian states and union territories formally adopted ECBC and six additional states are in the legislative process of approving ECBC. There are several barriers that slow down the process. First, stakeholders, such as architects, developers, and state and local governments, lack awareness of building energy efficiency, and do not have enough capacity and resources to implement ECBC. Second, institution for implementing ECBC is not set up yet; ECBC is not included in local building by-laws or incorporated into the building permit process. Third, there is not a systematic approach to measuring and verifying compliance and energy savings, and thus the market does not have enough confidence in ECBC. Energy codes achieve energy savings only when projects comply with codes, yet only few countries measure compliance consistently and periodic checks often indicate poor compliance in many jurisdictions. China and the U.S. appear to be two countries with comprehensive systems in code enforcement and compliance The United States recently developed methodologies measuring compliance with building energy codes at the state level. China has an annual survey investigating code compliance rate at the design and construction stages in major cities. Like many developing countries, India has only recently begun implementing an energy code and would benefit from international experience on code compliance. In this paper, we examine lessons learned from the U.S. and China on compliance assessment and how India can apply these lessons to develop its own compliance evaluation approach. This paper also provides policy suggestions to national, state, and local governments to improve compliance and speed up ECBC implementation.« less

  10. Potential Energy Cost Savings from Increased Commercial Energy Code Compliance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosenberg, Michael I.; Hart, Philip R.; Athalye, Rahul A.

    2016-08-22

    An important question for commercial energy code compliance is: “How much energy cost savings can better compliance achieve?” This question is in sharp contrast to prior efforts that used a checklist of code requirements, each of which was graded pass or fail. Percent compliance for any given building was simply the percent of individual requirements that passed. A field investigation method is being developed that goes beyond the binary approach to determine how much energy cost savings is not realized. Prototype building simulations were used to estimate the energy cost impact of varying levels of non-compliance for newly constructed officemore » buildings in climate zone 4C. Field data collected from actual buildings on specific conditions relative to code requirements was then applied to the simulation results to find the potential lost energy savings for a single building or for a sample of buildings. This new methodology was tested on nine office buildings in climate zone 4C. The amount of additional energy cost savings they could have achieved had they complied fully with the 2012 International Energy Conservation Code is determined. This paper will present the results of the test, lessons learned, describe follow-on research that is needed to verify that the methodology is both accurate and practical, and discuss the benefits that might accrue if the method were widely adopted.« less

  11. An international survey of building energy codes and their implementation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Evans, Meredydd; Roshchanka, Volha; Graham, Peter

    Buildings are key to low-carbon development everywhere, and many countries have introduced building energy codes to improve energy efficiency in buildings. Yet, building energy codes can only deliver results when the codes are implemented. For this reason, studies of building energy codes need to consider implementation of building energy codes in a consistent and comprehensive way. This research identifies elements and practices in implementing building energy codes, covering codes in 22 countries that account for 70% of global energy demand from buildings. Access to benefits of building energy codes depends on comprehensive coverage of buildings by type, age, size, andmore » geographic location; an implementation framework that involves a certified agency to inspect construction at critical stages; and independently tested, rated, and labeled building energy materials. Training and supporting tools are another element of successful code implementation, and their role is growing in importance, given the increasing flexibility and complexity of building energy codes. Some countries have also introduced compliance evaluation and compliance checking protocols to improve implementation. This article provides examples of practices that countries have adopted to assist with implementation of building energy codes.« less

  12. Building code compliance and enforcement: The experience of San Francisco's residential energy conservation ordinance and California's building standards for new construction

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vine, E.

    1990-11-01

    As part of Lawrence Berkeley Laboratory's (LBL) technical assistance to the Sustainable City Project, compliance and enforcement activities related to local and state building codes for existing and new construction were evaluated in two case studies. The analysis of the City of San Francisco's Residential Energy Conservation Ordinance (RECO) showed that a limited, prescriptive energy conservation ordinance for existing residential construction can be enforced relatively easily with little administrative costs, and that compliance with such ordinances can be quite high. Compliance with the code was facilitated by extensive publicity, an informed public concerned with the cost of energy and knowledgeablemore » about energy efficiency, the threat of punishment (Order of Abatement), the use of private inspectors, and training workshops for City and private inspectors. The analysis of California's Title 24 Standards for new residential and commercial construction showed that enforcement of this type of code for many climate zones is more complex and requires extensive administrative support for education and training of inspectors, architects, engineers, and builders. Under this code, prescriptive and performance approaches for compliance are permitted, resulting in the demand for alternative methods of enforcement: technical assistance, plan review, field inspection, and computer analysis. In contrast to existing to construction, building design and new materials and construction practices are of critical importance in new construction, creating a need for extensive technical assistance and extensive interaction between enforcement personnel and the building community. Compliance problems associated with building design and installation did occur in both residential and nonresidential buildings. 12 refs., 5 tabs.« less

  13. 10 CFR 434.604 - Compliance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Compliance. 434.604 Section 434.604 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.604 Compliance. 604.1 Compliance with this section is...

  14. 10 CFR 434.604 - Compliance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Compliance. 434.604 Section 434.604 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.604 Compliance. 604.1 Compliance with this section is...

  15. 10 CFR 434.604 - Compliance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Compliance. 434.604 Section 434.604 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.604 Compliance. 604.1 Compliance with this section is...

  16. 10 CFR 434.604 - Compliance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Compliance. 434.604 Section 434.604 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.604 Compliance. 604.1 Compliance with this section is...

  17. 10 CFR 434.604 - Compliance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Compliance. 434.604 Section 434.604 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.604 Compliance. 604.1 Compliance with this section is...

  18. Preserving Envelope Efficiency in Performance Based Code Compliance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Thornton, Brian A.; Sullivan, Greg P.; Rosenberg, Michael I.

    2015-06-20

    The City of Seattle 2012 Energy Code (Seattle 2014), one of the most progressive in the country, is under revision for its 2015 edition. Additionally, city personnel participate in the development of the next generation of the Washington State Energy Code and the International Energy Code. Seattle has pledged carbon neutrality by 2050 including buildings, transportation and other sectors. The United States Department of Energy (DOE), through Pacific Northwest National Laboratory (PNNL) provided technical assistance to Seattle in order to understand the implications of one potential direction for its code development, limiting trade-offs of long-lived building envelope components less stringentmore » than the prescriptive code envelope requirements by using better-than-code but shorter-lived lighting and heating, ventilation, and air-conditioning (HVAC) components through the total building performance modeled energy compliance path. Weaker building envelopes can permanently limit building energy performance even as lighting and HVAC components are upgraded over time, because retrofitting the envelope is less likely and more expensive. Weaker building envelopes may also increase the required size, cost and complexity of HVAC systems and may adversely affect occupant comfort. This report presents the results of this technical assistance. The use of modeled energy code compliance to trade-off envelope components with shorter-lived building components is not unique to Seattle and the lessons and possible solutions described in this report have implications for other jurisdictions and energy codes.« less

  19. 10 CFR 434.509 - Compliance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Compliance. 434.509 Section 434.509 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.509 Compliance. 509.1If the Design Energy Cost...

  20. 10 CFR 434.509 - Compliance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Compliance. 434.509 Section 434.509 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.509 Compliance. 509.1 If the Design Energy Cost...

  1. 10 CFR 434.509 - Compliance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Compliance. 434.509 Section 434.509 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.509 Compliance. 509.1If the Design Energy Cost...

  2. 10 CFR 434.509 - Compliance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Compliance. 434.509 Section 434.509 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.509 Compliance. 509.1If the Design Energy Cost...

  3. 10 CFR 434.509 - Compliance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Compliance. 434.509 Section 434.509 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.509 Compliance. 509.1If the Design Energy Cost...

  4. 78 FR 47677 - DOE Activities and Methodology for Assessing Compliance With Building Energy Codes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-06

    ... construction. Post- construction evaluations were implemented in one study in an effort to reduce these costs... these pilot studies have led to a number of recommendations and potential changes to the DOE methodology... fundamental assumptions and approaches to measuring compliance with building energy codes. This notice...

  5. Building Code Compliance and Enforcement: The Experience of SanFrancisco's Residential Energy Conservation Ordinanace and California'sBuildign Standards for New Construction

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vine, E.

    1990-11-01

    As part of Lawrence Berkeley Laboratory's (LBL) technical assistance to the Sustainable City Project, compliance and enforcement activities related to local and state building codes for existing and new construction were evaluated in two case studies. The analysis of the City of San Francisco's Residential Energy Conservation Ordinance (RECO) showed that a limited, prescriptive energy conservation ordinance for existing residential construction can be enforced relatively easily with little administrative costs, and that compliance with such ordinances can be quite high. Compliance with the code was facilitated by extensive publicity, an informed public concerned with the cost of energy and knowledgeablemore » about energy efficiency, the threat of punishment (Order of Abatement), the use of private inspectors, and training workshops for City and private inspectors. The analysis of California's Title 24 Standards for new residential and commercial construction showed that enforcement of this type of code for many climate zones is more complex and requires extensive administrative support for education and training of inspectors, architects, engineers, and builders. Under this code, prescriptive and performance approaches for compliance are permitted, resulting in the demand for alternative methods of enforcement: technical assistance, plan review, field inspection, and computer analysis. In contrast to existing construction, building design and new materials and construction practices are of critical importance in new construction, creating a need for extensive technical assistance and extensive interaction between enforcement personnel and the building community. Compliance problems associated with building design and installation did occur in both residential and nonresidential buildings. Because statewide codes are enforced by local officials, these problems may increase over time as energy standards change and become more complex and as other standards (eg, health and safety codes) remain a higher priority. The California Energy Commission realizes that code enforcement by itself is insufficient and expects that additional educational and technical assistance efforts (eg, manuals, training programs, and toll-free telephone lines) will ameliorate these problems.« less

  6. 10 CFR 434.102 - Compliance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Compliance. 434.102 Section 434.102 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Administration and Enforcement-General § 434.102 Compliance. 102.1A covered building must be...

  7. 10 CFR 434.102 - Compliance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Compliance. 434.102 Section 434.102 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Administration and Enforcement-General § 434.102 Compliance. 102.1A covered building must be...

  8. Compliance Verification Paths for Residential and Commercial Energy Codes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Conover, David R.; Makela, Eric J.; Fannin, Jerica D.

    2011-10-10

    This report looks at different ways to verify energy code compliance and to ensure that the energy efficiency goals of an adopted document are achieved. Conformity assessment is the body of work that ensures compliance, including activities that can ensure residential and commercial buildings satisfy energy codes and standards. This report identifies and discusses conformity-assessment activities and provides guidance for conducting assessments.

  9. 26 CFR 1.42-5 - Monitoring compliance with low-income housing credit requirements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... be required to retain the original local health, safety, or building code violation reports or... account local health, safety, and building codes (or other habitability standards), and the State or local government unit responsible for making local health, safety, or building code inspections did not issue a...

  10. 26 CFR 1.42-5 - Monitoring compliance with low-income housing credit requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... be required to retain the original local health, safety, or building code violation reports or... account local health, safety, and building codes (or other habitability standards), and the State or local government unit responsible for making local health, safety, or building code inspections did not issue a...

  11. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dillon, Heather E.; Antonopoulos, Chrissi A.; Solana, Amy E.

    As the model energy codes are improved to reach efficiency levels 50 percent greater than current codes, use of on-site renewable energy generation is likely to become a code requirement. This requirement will be needed because traditional mechanisms for code improvement, including envelope, mechanical and lighting, have been pressed to the end of reasonable limits. Research has been conducted to determine the mechanism for implementing this requirement (Kaufman 2011). Kaufmann et al. determined that the most appropriate way to structure an on-site renewable requirement for commercial buildings is to define the requirement in terms of an installed power density permore » unit of roof area. This provides a mechanism that is suitable for the installation of photovoltaic (PV) systems on future buildings to offset electricity and reduce the total building energy load. Kaufmann et al. suggested that an appropriate maximum for the requirement in the commercial sector would be 4 W/ft{sup 2} of roof area or 0.5 W/ft{sup 2} of conditioned floor area. As with all code requirements, there must be an alternative compliance path for buildings that may not reasonably meet the renewables requirement. This might include conditions like shading (which makes rooftop PV arrays less effective), unusual architecture, undesirable roof pitch, unsuitable building orientation, or other issues. In the short term, alternative compliance paths including high performance mechanical equipment, dramatic envelope changes, or controls changes may be feasible. These options may be less expensive than many renewable systems, which will require careful balance of energy measures when setting the code requirement levels. As the stringency of the code continues to increase however, efficiency trade-offs will be maximized, requiring alternative compliance options to be focused solely on renewable electricity trade-offs or equivalent programs. One alternate compliance path includes purchase of Renewable Energy Credits (RECs). Each REC represents a specified amount of renewable electricity production and provides an offset of environmental externalities associated with non-renewable electricity production. The purpose of this paper is to explore the possible issues with RECs and comparable alternative compliance options. Existing codes have been examined to determine energy equivalence between the energy generation requirement and the RECs alternative over the life of the building. The price equivalence of the requirement and the alternative are determined to consider the economic drivers for a market decision. This research includes case studies that review how the few existing codes have incorporated RECs and some of the issues inherent with REC markets. Section 1 of the report reviews compliance options including RECs, green energy purchase programs, shared solar agreements and leases, and other options. Section 2 provides detailed case studies on codes that include RECs and community based alternative compliance methods. The methods the existing code requirements structure alternative compliance options like RECs are the focus of the case studies. Section 3 explores the possible structure of the renewable energy generation requirement in the context of energy and price equivalence. The price of RECs have shown high variation by market and over time which makes it critical to for code language to be updated frequently for a renewable energy generation requirement or the requirement will not remain price-equivalent over time. Section 4 of the report provides a maximum case estimate for impact to the PV market and the REC market based on the Kaufmann et al. proposed requirement levels. If all new buildings in the commercial sector complied with the requirement to install rooftop PV arrays, nearly 4,700 MW of solar would be installed in 2012, a major increase from EIA estimates of 640 MW of solar generation capacity installed in 2009. The residential sector could contribute roughly an additional 2,300 MW based on the same code requirement levels of 4 W/ft{sup 2} of roof area. Section 5 of the report provides a basic framework for draft code language recommendations based on the analysis of the alternative compliance levels.« less

  12. Energy Cost Impact of Non-Residential Energy Code Requirements

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, Jian; Hart, Philip R.; Rosenberg, Michael I.

    2016-08-22

    The 2012 International Energy Conservation Code contains 396 separate requirements applicable to non-residential buildings; however, there is no systematic analysis of the energy cost impact of each requirement. Consequently, limited code department budgets for plan review, inspection, and training cannot be focused on the most impactful items. An inventory and ranking of code requirements based on their potential energy cost impact is under development. The initial phase focuses on office buildings with simple HVAC systems in climate zone 4C. Prototype building simulations were used to estimate the energy cost impact of varying levels of non-compliance. A preliminary estimate of themore » probability of occurrence of each level of non-compliance was combined with the estimated lost savings for each level to rank the requirements according to expected savings impact. The methodology to develop and refine further energy cost impacts, specific to building type, system type, and climate location is demonstrated. As results are developed, an innovative alternative method for compliance verification can focus efforts so only the most impactful requirements from an energy cost perspective are verified for every building and a subset of the less impactful requirements are verified on a random basis across a building population. The results can be further applied in prioritizing training material development and specific areas of building official training.« less

  13. Reducing EnergyPlus Run Time For Code Compliance Tools

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Athalye, Rahul A.; Gowri, Krishnan; Schultz, Robert W.

    2014-09-12

    Integration of the EnergyPlus ™ simulation engine into performance-based code compliance software raises a concern about simulation run time, which impacts timely feedback of compliance results to the user. EnergyPlus annual simulations for proposed and code baseline building models, and mechanical equipment sizing result in simulation run times beyond acceptable limits. This paper presents a study that compares the results of a shortened simulation time period using 4 weeks of hourly weather data (one per quarter), to an annual simulation using full 52 weeks of hourly weather data. Three representative building types based on DOE Prototype Building Models and threemore » climate zones were used for determining the validity of using a shortened simulation run period. Further sensitivity analysis and run time comparisons were made to evaluate the robustness and run time savings of using this approach. The results of this analysis show that the shortened simulation run period provides compliance index calculations within 1% of those predicted using annual simulation results, and typically saves about 75% of simulation run time.« less

  14. RESRAD model presentation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yu, C.; Faillace, E.; Chen, S.Y.

    RESRAD was one of the multimedia models selected by the US Nuclear Regulatory Commission (NRC) to include in its workshop on radiation dose modeling and demonstration of compliance with the radiological criteria for license termination. This paper is a summary of the presentation made at the workshop and focuses on the 10 questions the NRC distributed to all participants prior to the workshop. The code selection criteria, which were solicited by the NRC, for demonstrating compliance with the license termination rule are also included. Among the RESRAD family of codes, RESRAD and RESRAD-BUILD are designed for evaluating radiological contamination inmore » soils and in buildings. Many documents have been published to support the use of these codes. This paper focuses on these two codes. The pathways considered, the databases and parameters used, quality control and quality assurance, benchmarking, verification and validation of these codes, and capabilities as well as limitations of these codes are discussed in detail.« less

  15. 31 CFR 11.6 - Terms of permit.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... vending facilities shall be operated in compliance with applicable health, sanitation, and building codes... normal cleaning, maintenance, and repair of the building structure in and adjacent to the vending...

  16. 31 CFR 11.6 - Terms of permit.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... vending facilities shall be operated in compliance with applicable health, sanitation, and building codes... normal cleaning, maintenance, and repair of the building structure in and adjacent to the vending...

  17. 31 CFR 11.6 - Terms of permit.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... vending facilities shall be operated in compliance with applicable health, sanitation, and building codes... normal cleaning, maintenance, and repair of the building structure in and adjacent to the vending...

  18. The Modular Factor.

    ERIC Educational Resources Information Center

    Cray, Dan

    1994-01-01

    Discusses the tradeoff of speed and movability versus costs when using relocatable buildings to solve educational space needs. Concluding comments address building-code compliance issues driving up expenses and impacting facility planning.(GR)

  19. An international survey of building energy codes and their implementation

    DOE PAGES

    Evans, Meredydd; Roshchanka, Volha; Graham, Peter

    2017-08-01

    Buildings are key to low-carbon development everywhere, and many countries have introduced building energy codes to improve energy efficiency in buildings. Yet, building energy codes can only deliver results when the codes are implemented. For this reason, studies of building energy codes need to consider implementation of building energy codes in a consistent and comprehensive way. This research identifies elements and practices in implementing building energy codes, covering codes in 22 countries that account for 70% of global energy use in buildings. These elements and practices include: comprehensive coverage of buildings by type, age, size, and geographic location; an implementationmore » framework that involves a certified agency to inspect construction at critical stages; and building materials that are independently tested, rated, and labeled. Training and supporting tools are another element of successful code implementation. Some countries have also introduced compliance evaluation studies, which suggested that tightening energy requirements would only be meaningful when also addressing gaps in implementation (Pitt&Sherry, 2014; U.S. DOE, 2016b). Here, this article provides examples of practices that countries have adopted to assist with implementation of building energy codes.« less

  20. An international survey of building energy codes and their implementation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Evans, Meredydd; Roshchanka, Volha; Graham, Peter

    Buildings are key to low-carbon development everywhere, and many countries have introduced building energy codes to improve energy efficiency in buildings. Yet, building energy codes can only deliver results when the codes are implemented. For this reason, studies of building energy codes need to consider implementation of building energy codes in a consistent and comprehensive way. This research identifies elements and practices in implementing building energy codes, covering codes in 22 countries that account for 70% of global energy use in buildings. These elements and practices include: comprehensive coverage of buildings by type, age, size, and geographic location; an implementationmore » framework that involves a certified agency to inspect construction at critical stages; and building materials that are independently tested, rated, and labeled. Training and supporting tools are another element of successful code implementation. Some countries have also introduced compliance evaluation studies, which suggested that tightening energy requirements would only be meaningful when also addressing gaps in implementation (Pitt&Sherry, 2014; U.S. DOE, 2016b). Here, this article provides examples of practices that countries have adopted to assist with implementation of building energy codes.« less

  1. Building an effective corporate compliance plan.

    PubMed

    Ryan, E

    1997-09-01

    Corporate compliance plans are essential for healthcare organizations to cope with, and perhaps even stave off, investigations arising from allegations of illegal business practices. Initial development and implementation of a corporate compliance plan can be facilitated through four steps: determining the content of the code of conduct, determining how the code will be distributed, assigning responsibility for implementing the plan, and appointing a compliance task force to guide the implementation process. Special attention should be paid to education requirements of the United States Sentencing Guidelines to see that all employees understand and can apply provisions of the plan.

  2. 10 CFR 434.503 - Prototype building procedure.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Prototype building procedure. 434.503 Section 434.503 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.503 Prototype...

  3. 10 CFR 434.503 - Prototype building procedure.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Prototype building procedure. 434.503 Section 434.503 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.503 Prototype...

  4. 10 CFR 434.503 - Prototype building procedure.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Prototype building procedure. 434.503 Section 434.503 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.503 Prototype...

  5. 10 CFR 434.503 - Prototype building procedure.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Prototype building procedure. 434.503 Section 434.503 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.503 Prototype...

  6. 10 CFR 434.503 - Prototype building procedure.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Prototype building procedure. 434.503 Section 434.503 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.503 Prototype...

  7. 10 CFR 434.505 - Reference building method.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Reference building method. 434.505 Section 434.505 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.505 Reference building method. 505...

  8. 10 CFR 434.505 - Reference building method.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Reference building method. 434.505 Section 434.505 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.505 Reference building method. 505.1...

  9. 10 CFR 434.505 - Reference building method.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Reference building method. 434.505 Section 434.505 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.505 Reference building method. 505...

  10. 10 CFR 434.505 - Reference building method.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Reference building method. 434.505 Section 434.505 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.505 Reference building method. 505...

  11. 10 CFR 434.505 - Reference building method.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Reference building method. 434.505 Section 434.505 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.505 Reference building method. 505...

  12. Capturing Energy-Saving Opportunities: Improving Building Efficiency in Rajasthan through Energy Code Implementation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tan, Qing; Yu, Sha; Evans, Meredydd

    2016-05-01

    India adopted the Energy Conservation Building Code (ECBC) in 2007. Rajasthan is the first state to make ECBC mandatory at the state level. In collaboration with Malaviya National Institute of Technology (MNIT) Jaipur, Pacific Northwest National Laboratory (PNNL) has been working with Rajasthan to facilitate the implementation of ECBC. This report summarizes milestones made in Rajasthan and PNNL's contribution in institutional set-ups, capacity building, compliance enforcement and pilot building construction.

  13. 49 CFR 41.119 - DOT regulated buildings.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... compliance may include the engineer's and architect's authenticated verification of seismic design codes... and additions to existing buildings will ensure that each DOT regulated building is designed and constructed in accord with seismic design and construction standards as provided by this part. (b) This...

  14. The international implications of national and local coordination on building energy codes: Case studies in six cities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Evans, Meredydd; Yu, Sha; Staniszewski, Aaron

    Building energy efficiency is an important strategy for reducing greenhouse gas emissions globally. In fact, 55 countries have included building energy efficiency in their Nationally Determined Contributions (NDCs) under the Paris Agreement. This research uses building energy code implementation in six cities across different continents as case studies to assess what it may take for countries to implement the ambitions of their energy efficiency goals. Specifically, we look at the cases of Bogota, Colombia; Da Nang, Vietnam; Eskisehir, Turkey; Mexico City, Mexico; Rajkot, India; and Tshwane, South Africa, all of which are “deep dive” cities under the Sustainable Energy formore » All's Building Efficiency Accelerator. The research focuses on understanding the baseline with existing gaps in implementation and coordination. The methodology used a combination of surveys on code status and interviews with stakeholders at the local and national level, as well as review of published documents. We looked at code development, implementation, and evaluation. The cities are all working to improve implementation, however, the challenges they currently face include gaps in resources, capacity, tools, and institutions to check for compliance. Better coordination between national and local governments could help improve implementation, but that coordination is not yet well established. For example, all six of the cities reported that there was little to no involvement of local stakeholders in development of the national code; only one city reported that it had access to national funding to support code implementation. More robust coordination could better link cities with capacity building and funding for compliance, and ensure that the code reflects local priorities. By understanding gaps in implementation, it can also help in designing more targeted interventions to scale up energy savings.« less

  15. The international implications of national and local coordination on building energy codes: Case studies in six cities

    DOE PAGES

    Evans, Meredydd; Yu, Sha; Staniszewski, Aaron; ...

    2018-04-17

    Building energy efficiency is an important strategy for reducing greenhouse gas emissions globally. In fact, 55 countries have included building energy efficiency in their Nationally Determined Contributions (NDCs) under the Paris Agreement. This research uses building energy code implementation in six cities across different continents as case studies to assess what it may take for countries to implement the ambitions of their energy efficiency goals. Specifically, we look at the cases of Bogota, Colombia; Da Nang, Vietnam; Eskisehir, Turkey; Mexico City, Mexico; Rajkot, India; and Tshwane, South Africa, all of which are “deep dive” cities under the Sustainable Energy formore » All's Building Efficiency Accelerator. The research focuses on understanding the baseline with existing gaps in implementation and coordination. The methodology used a combination of surveys on code status and interviews with stakeholders at the local and national level, as well as review of published documents. We looked at code development, implementation, and evaluation. The cities are all working to improve implementation, however, the challenges they currently face include gaps in resources, capacity, tools, and institutions to check for compliance. Better coordination between national and local governments could help improve implementation, but that coordination is not yet well established. For example, all six of the cities reported that there was little to no involvement of local stakeholders in development of the national code; only one city reported that it had access to national funding to support code implementation. More robust coordination could better link cities with capacity building and funding for compliance, and ensure that the code reflects local priorities. By understanding gaps in implementation, it can also help in designing more targeted interventions to scale up energy savings.« less

  16. 40 CFR Appendix III to Subpart S... - As-Received Inspection

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) General Compliance Provisions for Control of Air Pollution From New and In-Use Light-Duty Vehicles, Light... Reading 7. Build Date 8. MIL light on/off status 9. Readiness code status 10. Stored OBD codes 11.Any...

  17. 49 CFR 41.115 - New buildings to be leased for DOT occupancy.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... compliance may include the engineer's and architect's authenticated verifications of seismic design codes... design and construction of new buildings to be leased for DOT occupancy or use will ensure that each building is designed and constructed in accord with the seismic design and construction standards set out...

  18. 49 CFR 41.115 - New buildings to be leased for DOT occupancy.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... compliance may include the engineer's and architect's authenticated verifications of seismic design codes... design and construction of new buildings to be leased for DOT occupancy or use will ensure that each building is designed and constructed in accord with the seismic design and construction standards set out...

  19. 10 CFR 434.506 - Use of the reference building to determine the energy cost budget.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Use of the reference building to determine the energy cost budget. 434.506 Section 434.506 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance...

  20. 10 CFR 434.504 - Use of the prototype building to determine the energy cost budget.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Use of the prototype building to determine the energy cost budget. 434.504 Section 434.504 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance...

  1. Implementing Nepal's national building code—A case study in patience and persistence

    USGS Publications Warehouse

    Arendt, Lucy; Hortacsu, Ayse; Jaiswal, Kishor; Bevington, John; Shrestha, Surya; Lanning, Forrest; Mentor-William, Garmalia; Naeem, Ghazala; Thibert, Kate

    2017-01-01

    The April 2015 Gorkha Nepal earthquake revealed the relative effectiveness of the Nepal Standard, or national building code (NBC), and irregular compliance with it in different parts of Nepal. Much of the damage to more than half a million Nepal's residential structures may be attributed to the prevalence of owner-built or owner-supervised construction and the lack of owner and builder responsiveness to seismic risk and training in the appropriate means of complying with the NBC. To explain these circumstances, we review the protracted implementation of the NBC and the role played by one organization, the National Society for Earthquake Technology-Nepal (NSET), in the NBC's implementation. We also share observations on building code compliance made by individuals in Nepal participating in workshops led by the Earthquake Engineering Research Institute's 2014 class of Housner Fellows.

  2. 24 CFR 905.312 - Design and construction.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... constructed in compliance with: (1) A national building code, such as those developed by the International Code Council or the National Fire Protection Association; and the IECC or ASHRAE 90.1-2010 (both... a successor energy code or standard that has been adopted by HUD pursuant to 42 U.S.C. 12709 or...

  3. Challenges of Achieving 2012 IECC Air Sealing Requirements in Multifamily Dwellings

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Klocke, S.; Faakye, O.; Puttagunta, S.

    2014-10-01

    While previous versions of the International Energy Conservation Code (IECC) have included provisions to improve the air tightness of dwellings, for the first time, the 2012 IECC mandates compliance verification through blower door testing. Simply completing the Air Barrier and Insulation Installation checklist through visual inspection is no longer sufficient by itself. In addition, the 2012 IECC mandates a significantly stricter air sealing requirement. In Climate Zones 3 through 8, air leakage may not exceed 3 ACH50, which is a significant reduction from the 2009 IECC requirement of 7 ACH50. This requirement is for all residential buildings, which includes low-risemore » multifamily dwellings. While this air leakage rate requirement is an important component to achieving an efficient building thermal envelope, currently, the code language doesn't explicitly address differences between single family and multifamily applications. In addition, the 2012 IECC does not provide an option to sample dwellings for larger multifamily buildings, so compliance would have to be verified on every unit. With compliance with the 2012 IECC air leakage requirements on the horizon, several of Consortium for Advanced Residential Building's (CARB’s) multifamily builder partners are evaluating how best to comply with this requirement. Builders are not sure whether it is more practical or beneficial to simply pay for guarded testing or to revise their air sealing strategies to improve compartmentalization to comply with code requirements based on unguarded blower door testing. This report summarizes CARB's research that was conducted to assess the feasibility of meeting the 2012 IECC air leakage requirements in 3 multifamily buildings.« less

  4. Building America Case Study: Challenges of Achieving 2012 IECC Air Sealing Requirements in Multifamily Dwellings, Upstate New York (Fact Sheet)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    2014-11-01

    While previous versions of the International Energy Conservation Code (IECC) have included provisions to improve the air tightness of dwellings, for the first time, the 2012 IECC mandates compliance verification through blower door testing. Simply completing the Air Barrier and Insulation Installation checklist through visual inspection is no longer sufficient by itself. In addition, the 2012 IECC mandates a significantly stricter air sealing requirement. In Climate Zones 3 through 8, air leakage may not exceed 3 ACH50, which is a significant reduction from the 2009 IECC requirement of 7 ACH50. This requirement is for all residential buildings, which includes low-risemore » multifamily dwellings. While this air leakage rate requirement is an important component to achieving an efficient building thermal envelope, currently, the code language doesn't explicitly address differences between single family and multifamily applications. In addition, the 2012 IECC does not provide an option to sample dwellings for larger multifamily buildings, so compliance would have to be verified on every unit. With compliance with the 2012 IECC air leakage requirements on the horizon, several of CARB's multifamily builder partners are evaluating how best to comply with this requirement. Builders are not sure whether it is more practical or beneficial to simply pay for guarded testing or to revise their air sealing strategies to improve compartmentalization to comply with code requirements based on unguarded blower door testing. This report summarizes CARB's research that was conducted to assess the feasibility of meeting the 2012 IECC air leakage requirements in 3 multifamily buildings.« less

  5. New Whole-House Solutions Case Study: Challenges of Achieving 2012 IECC Air Sealing Requirements in Multifamily Dwellings, Upstate New York

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2014-11-01

    While previous versions of the International Energy Conservation Code (IECC) have included provisions to improve the air tightness of dwellings, for the first time, the 2012 IECC mandates compliance verification through blower door testing. Simply completing the Air Barrier and Insulation Installation checklist through visual inspection is no longer sufficient; the 2012 IECC mandates a significantly stricter air sealing requirement. In Climate Zones 3 through 8, air leakage may not exceed 3 ACH50, which is a significant reduction from the 2009 IECC requirement of 7 ACH50. This requirement is for all residential buildings, which includes low-rise multifamily dwellings. While thismore » air leakage rate requirement is an important component to achieving an efficient building thermal envelope, currently, the code language doesn't explicitly address differences between single family and multifamily applications. In addition, the 2012 IECC does not provide an option to sample dwellings for larger multifamily buildings, so compliance would have to be verified on every unit. With compliance with the 2012 IECC air leakage requirements on the horizon, several of Building America team Consortium for Advanced Residential Building's (CARB) multifamily builder partners are evaluating how best to comply with this requirement. Builders are not sure whether it is more practical or beneficial to simply pay for guarded testing or to revise their air sealing strategies to improve compartmentalization to comply with code requirements based on unguarded blower door testing. This report summarizes CARB's research that was conducted to assess the feasibility of meeting the 2012 IECC air leakage requirements in three multifamily buildings.« less

  6. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosenberg, Michael; Jonlin, Duane; Nadel, Steven

    Today’s building energy codes focus on prescriptive requirements for features of buildings that are directly controlled by the design and construction teams and verifiable by municipal inspectors. Although these code requirements have had a significant impact, they fail to influence a large slice of the building energy use pie – including not only miscellaneous plug loads, cooking equipment and commercial/industrial processes, but the maintenance and optimization of the code-mandated systems as well. Currently, code compliance is verified only through the end of construction, and there are no limits or consequences for the actual energy use in an occupied building. Inmore » the future, our suite of energy regulations will likely expand to include building efficiency, energy use or carbon emission budgets over their full life cycle. Intelligent building systems, extensive renewable energy, and a transition from fossil fuel to electric heating systems will likely be required to meet ultra-low-energy targets. This paper lays out the authors’ perspectives on how buildings may evolve over the course of the 21st century and the roles that codes and regulations will play in shaping those buildings of the future.« less

  7. 10 CFR 434.605 - Standard Calculation Procedure.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Standard Calculation Procedure. 434.605 Section 434.605 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.605 Standard Calculation...

  8. 10 CFR 434.605 - Standard Calculation Procedure.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Standard Calculation Procedure. 434.605 Section 434.605 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.605 Standard Calculation...

  9. 10 CFR 434.513 - Occupancy.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Occupancy. 434.513 Section 434.513 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.513 Occupancy. 5131Occupancy schedules are...

  10. 10 CFR 434.510 - Standard calculation procedure.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Standard calculation procedure. 434.510 Section 434.510 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.510 Standard...

  11. 10 CFR 434.605 - Standard Calculation Procedure.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Standard Calculation Procedure. 434.605 Section 434.605 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.605 Standard Calculation...

  12. 10 CFR 434.513 - Occupancy.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Occupancy. 434.513 Section 434.513 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.513 Occupancy. 5131 Occupancy schedules are...

  13. 10 CFR 434.605 - Standard Calculation Procedure.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Standard Calculation Procedure. 434.605 Section 434.605 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.605 Standard Calculation...

  14. 10 CFR 434.513 - Occupancy.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Occupancy. 434.513 Section 434.513 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.513 Occupancy. 5131Occupancy schedules are...

  15. 10 CFR 434.510 - Standard calculation procedure.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Standard calculation procedure. 434.510 Section 434.510 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.510 Standard...

  16. 10 CFR 434.605 - Standard Calculation Procedure.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Standard Calculation Procedure. 434.605 Section 434.605 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.605 Standard Calculation...

  17. 10 CFR 434.513 - Occupancy.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Occupancy. 434.513 Section 434.513 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.513 Occupancy. 5131Occupancy schedules are...

  18. 10 CFR 434.510 - Standard calculation procedure.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Standard calculation procedure. 434.510 Section 434.510 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.510 Standard...

  19. 10 CFR 434.510 - Standard calculation procedure.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Standard calculation procedure. 434.510 Section 434.510 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.510 Standard...

  20. 7 CFR 1436.5 - Eligible borrowers.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... with any applicable local zoning, land use, and building codes for the applicable farm storage facility... has all peril structural insurance; (10) Demonstrates compliance with the National Environmental...

  1. 10 CFR 434.514 - Lighting.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Lighting. 434.514 Section 434.514 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.514 Lighting. 514.1Interior Lighting Power...

  2. 10 CFR 434.514 - Lighting.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Lighting. 434.514 Section 434.514 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.514 Lighting. 514.1Interior Lighting Power...

  3. 10 CFR 434.515 - Receptacles.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Receptacles. 434.515 Section 434.515 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.515 Receptacles. 515.1Receptacle loads and...

  4. 10 CFR 434.515 - Receptacles.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Receptacles. 434.515 Section 434.515 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.515 Receptacles. 515.1 Receptacle loads and...

  5. 10 CFR 434.514 - Lighting.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Lighting. 434.514 Section 434.514 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.514 Lighting. 514.1Interior Lighting Power...

  6. 10 CFR 434.515 - Receptacles.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Receptacles. 434.515 Section 434.515 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.515 Receptacles. 515.1Receptacle loads and...

  7. 10 CFR 434.515 - Receptacles.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Receptacles. 434.515 Section 434.515 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.515 Receptacles. 515.1Receptacle loads and...

  8. 10 CFR 434.514 - Lighting.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Lighting. 434.514 Section 434.514 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.514 Lighting. 514.1 Interior Lighting Power...

  9. 10 CFR 434.514 - Lighting.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Lighting. 434.514 Section 434.514 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.514 Lighting. 514.1Interior Lighting Power...

  10. 10 CFR 434.606 - Simulation tool.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Simulation tool. 434.606 Section 434.606 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.606 Simulation tool. 606.1 The criteria...

  11. 10 CFR 434.601 - General.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false General. 434.601 Section 434.601 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.601 General. 601.1 This subpart provides an...

  12. 10 CFR 434.601 - General.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false General. 434.601 Section 434.601 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.601 General. 601.1This subpart provides an...

  13. 10 CFR 434.601 - General.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false General. 434.601 Section 434.601 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.601 General. 601.1This subpart provides an...

  14. Impacts of Model Building Energy Codes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Athalye, Rahul A.; Sivaraman, Deepak; Elliott, Douglas B.

    The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) periodically evaluates national and state-level impacts associated with energy codes in residential and commercial buildings. Pacific Northwest National Laboratory (PNNL), funded by DOE, conducted an assessment of the prospective impacts of national model building energy codes from 2010 through 2040. A previous PNNL study evaluated the impact of the Building Energy Codes Program; this study looked more broadly at overall code impacts. This report describes the methodology used for the assessment and presents the impacts in terms of energy savings, consumer cost savings, and reduced CO 2 emissions atmore » the state level and at aggregated levels. This analysis does not represent all potential savings from energy codes in the U.S. because it excludes several states which have codes which are fundamentally different from the national model energy codes or which do not have state-wide codes. Energy codes follow a three-phase cycle that starts with the development of a new model code, proceeds with the adoption of the new code by states and local jurisdictions, and finishes when buildings comply with the code. The development of new model code editions creates the potential for increased energy savings. After a new model code is adopted, potential savings are realized in the field when new buildings (or additions and alterations) are constructed to comply with the new code. Delayed adoption of a model code and incomplete compliance with the code’s requirements erode potential savings. The contributions of all three phases are crucial to the overall impact of codes, and are considered in this assessment.« less

  15. 10 CFR 434.507 - Calculation procedure and simulation tool.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Calculation procedure and simulation tool. 434.507 Section 434.507 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.507...

  16. 78 FR 55245 - Activities and Methodology for Assessing Compliance With Building Energy Codes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-10

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy [Docket No. EERE-2013-BT-BC... Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of reopening of public..., Office of Energy Efficiency and Renewable Energy, Building Technologies Program, Mailstop EE-2J, 1000...

  17. 10 CFR 434.511 - Orientation and shape.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Orientation and shape. 434.511 Section 434.511 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.511 Orientation and shape. 511.1 The...

  18. 10 CFR 434.607 - Life cycle cost analysis criteria.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Life cycle cost analysis criteria. 434.607 Section 434.607 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.607 Life cycle cost...

  19. 10 CFR 434.518 - Service water heating.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Service water heating. 434.518 Section 434.518 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.518 Service water heating. 518.1The...

  20. 10 CFR 434.511 - Orientation and shape.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Orientation and shape. 434.511 Section 434.511 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.511 Orientation and shape. 511.1The...

  1. 10 CFR 434.607 - Life cycle cost analysis criteria.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Life cycle cost analysis criteria. 434.607 Section 434.607 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.607 Life cycle cost...

  2. 10 CFR 434.602 - Determination of the annual energy budget.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Determination of the annual energy budget. 434.602 Section 434.602 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.602...

  3. 10 CFR 434.512 - Internal loads.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Internal loads. 434.512 Section 434.512 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.512 Internal loads. 512.1 The systems...

  4. 10 CFR 434.512 - Internal loads.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Internal loads. 434.512 Section 434.512 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.512 Internal loads. 512.1The systems...

  5. 10 CFR 434.607 - Life cycle cost analysis criteria.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Life cycle cost analysis criteria. 434.607 Section 434.607 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.607 Life cycle cost...

  6. 10 CFR 434.511 - Orientation and shape.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Orientation and shape. 434.511 Section 434.511 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.511 Orientation and shape. 511.1The...

  7. 10 CFR 434.511 - Orientation and shape.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Orientation and shape. 434.511 Section 434.511 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.511 Orientation and shape. 511.1The...

  8. 10 CFR 434.602 - Determination of the annual energy budget.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Determination of the annual energy budget. 434.602 Section 434.602 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.602...

  9. 10 CFR 434.512 - Internal loads.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Internal loads. 434.512 Section 434.512 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.512 Internal loads. 512.1The systems...

  10. 10 CFR 434.518 - Service water heating.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Service water heating. 434.518 Section 434.518 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.518 Service water heating. 518.1The...

  11. 10 CFR 434.512 - Internal loads.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Internal loads. 434.512 Section 434.512 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.512 Internal loads. 512.1The systems...

  12. 10 CFR 434.602 - Determination of the annual energy budget.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Determination of the annual energy budget. 434.602 Section 434.602 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.602...

  13. 10 CFR 434.603 - Determination of the design energy use.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Determination of the design energy use. 434.603 Section 434.603 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.603...

  14. 10 CFR 434.602 - Determination of the annual energy budget.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Determination of the annual energy budget. 434.602 Section 434.602 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.602...

  15. 10 CFR 434.602 - Determination of the annual energy budget.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Determination of the annual energy budget. 434.602 Section 434.602 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.602...

  16. 10 CFR 434.603 - Determination of the design energy use.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Determination of the design energy use. 434.603 Section 434.603 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.603...

  17. Challenges of Achieving 2012 IECC Air Sealing Requirements in Multifamily Dwellings

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Klocke, S.; Faakye, O.; Puttagunta, S.

    2014-10-01

    ​While previous versions of the International Energy Conservation Code (IECC) have included provisions to improve the air tightness of dwellings, for the first time, the 2012 IECC mandates compliance verification through blower door testing. Simply completing the Air Barrier and Insulation Installation checklist through visual inspection is no longer sufficient by itself. In addition, the 2012 IECC mandates a significantly stricter air sealing requirement. In Climate Zones 3 through 8, air leakage may not exceed 3 ACH50, which is a significant reduction from the 2009 IECC requirement of 7 ACH50. This requirement is for all residential buildings, which includes low-risemore » multifamily dwellings. While this air leakage rate requirement is an important component to achieving an efficient building thermal envelope, currently, the code language doesn't explicitly address differences between single family and multifamily applications. In addition, the 2012 IECC does not provide an option to sample dwellings for larger multifamily buildings, so compliance would have to be verified on every unit. With compliance with the 2012 IECC air leakage requirements on the horizon, several of CARB's multifamily builder partners are evaluating how best to comply with this requirement. Builders are not sure whether it is more practical or beneficial to simply pay for guarded testing or to revise their air sealing strategies to improve compartmentalization to comply with code requirements based on unguarded blower door testing. This report summarizes CARB's research that was conducted to assess the feasibility of meeting the 2012 IECC air leakage requirements in 3 multifamily buildings.« less

  18. Increasing Flexibility in Energy Code Compliance: Performance Packages

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hart, Philip R.; Rosenberg, Michael I.

    Energy codes and standards have provided significant increases in building efficiency over the last 38 years, since the first national energy code was published in late 1975. The most commonly used path in energy codes, the prescriptive path, appears to be reaching a point of diminishing returns. As the code matures, the prescriptive path becomes more complicated, and also more restrictive. It is likely that an approach that considers the building as an integrated system will be necessary to achieve the next real gains in building efficiency. Performance code paths are increasing in popularity; however, there remains a significant designmore » team overhead in following the performance path, especially for smaller buildings. This paper focuses on development of one alternative format, prescriptive packages. A method to develop building-specific prescriptive packages is reviewed based on a multiple runs of prototypical building models that are used to develop parametric decision analysis to determines a set of packages with equivalent energy performance. The approach is designed to be cost-effective and flexible for the design team while achieving a desired level of energy efficiency performance. A demonstration of the approach based on mid-sized office buildings with two HVAC system types is shown along with a discussion of potential applicability in the energy code process.« less

  19. 7 CFR 1436.5 - Eligible borrowers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... erodible land and wetlands conservation provisions according to 7 CFR part 12; (8) Demonstrates compliance with any applicable local zoning, land use, and building codes for the applicable farm storage facility...

  20. 10 CFR 434.502 - Determination of the annual energy cost budget.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Determination of the annual energy cost budget. 434.502 Section 434.502 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.502...

  1. 10 CFR 434.502 - Determination of the annual energy cost budget.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Determination of the annual energy cost budget. 434.502 Section 434.502 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.502...

  2. 10 CFR 434.502 - Determination of the annual energy cost budget.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Determination of the annual energy cost budget. 434.502 Section 434.502 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.502...

  3. 10 CFR 434.502 - Determination of the annual energy cost budget.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Determination of the annual energy cost budget. 434.502 Section 434.502 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.502...

  4. 10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance...

  5. 10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance...

  6. 10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance...

  7. 10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance...

  8. 10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance...

  9. 10 CFR 434.502 - Determination of the annual energy cost budget.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Determination of the annual energy cost budget. 434.502 Section 434.502 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.502...

  10. 77 FR 31647 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-29

    ... includes the retrofit and build-out of the facility, which will be located in Mt. Pleasant, Pennsylvania. The NAICS industry code for this enterprise is: 335911 (storage battery manufacturing). DATES: All..., Assistant Secretary for Employment and Training. [FR Doc. 2012-12917 Filed 5-25-12; 8:45 am] BILLING CODE...

  11. 77 FR 1955 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-12

    ... Product/Purpose: The loan, guarantee, or grant application is to finance building construction and to... Dakota. The NAICS industry code for this enterprise is: 311611 (beef produced in slaughtering plants..., Assistant Secretary for Employment and Training. [FR Doc. 2012-448 Filed 1-11-12; 8:45 am] BILLING CODE 4510...

  12. 75 FR 22165 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-27

    ...-fit an existing manufacturing facility to produce autoclaved aerated concrete (AAC) ``green'' building materials. The NAICS industry code for this enterprise is: 327331 Concrete Block and Brick Manufacturing...

  13. 77 FR 31892 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-30

    ... skilled nursing facility and a 3,600 square foot maintenance building in Picayune, Mississippi. The NAICS industry code for this enterprise is: 623110 (nursing care facilities). DATES: All interested parties may...

  14. Technical Support Document for Version 3.4.0 of the COMcheck Software

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

    2007-09-14

    COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.« less

  15. Technical Support Document for Version 3.9.0 of the COMcheck Software

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

    2011-09-01

    COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC are no longer included, but those sections remain in this document for reference purposes.« less

  16. Technical Support Document for Version 3.9.1 of the COMcheck Software

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

    2012-09-01

    COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC and version 3.9.0 support for 2000 and 2001 IECC are no longer included, but those sections remain in this document for reference purposes.« less

  17. Energy Efficiency Building Code for Commercial Buildings in Sri Lanka

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Busch, John; Greenberg, Steve; Rubinstein, Francis

    2000-09-30

    1.1.1 To encourage energy efficient design or retrofit of commercial buildings so that they may be constructed, operated, and maintained in a manner that reduces the use of energy without constraining the building function, the comfort, health, or the productivity of the occupants and with appropriate regard for economic considerations. 1.1.2 To provide criterion and minimum standards for energy efficiency in the design or retrofit of commercial buildings and provide methods for determining compliance with them. 1.1.3 To encourage energy efficient designs that exceed these criterion and minimum standards.

  18. A High-Granularity Approach to Modeling Energy Consumption and Savings Potential in the U.S. Residential Building Stock

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    Building simulations are increasingly used in various applications related to energy efficient buildings. For individual buildings, applications include: design of new buildings, prediction of retrofit savings, ratings, performance path code compliance and qualification for incentives. Beyond individual building applications, larger scale applications (across the stock of buildings at various scales: national, regional and state) include: codes and standards development, utility program design, regional/state planning, and technology assessments. For these sorts of applications, a set of representative buildings are typically simulated to predict performance of the entire population of buildings. Focusing on the U.S. single-family residential building stock, this paper willmore » describe how multiple data sources for building characteristics are combined into a highly-granular database that preserves the important interdependencies of the characteristics. We will present the sampling technique used to generate a representative set of thousands (up to hundreds of thousands) of building models. We will also present results of detailed calibrations against building stock consumption data.« less

  19. Chargemaster maintenance: think 'spring cleaning' all year round.

    PubMed

    Barton, Shawn; Lancaster, Dani; Bieker, Mike

    2008-11-01

    Steps toward maintaining a standardized chargemaster include: Building a corporate chargemaster maintenance team. Developing a core research function. Designating hospital liaisons. Publishing timely reports on facility compliance. Using system codes to identify charges. Selecting chargemaster maintenance software. Developing a standard chargemaster data repository. Educating staff.

  20. 49 CFR 41.117 - Buildings built with Federal assistance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... architect's authenticated verifications of seismic design codes, standards, and practices used in the design... financial assistance, after July 14, 1993 must be designed and constructed in accord with seismic standards... of compliance with the seismic design and construction requirements of this part is required prior to...

  1. Alternative Formats to Achieve More Efficient Energy Codes for Commercial Buildings

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Conover, David R.; Rosenberg, Michael I.; Halverson, Mark A.

    2013-01-26

    This paper identifies and examines several formats or structures that could be used to create the next generation of more efficient energy codes and standards for commercial buildings. Pacific Northwest National Laboratory (PNNL) is funded by the U.S. Department of Energy’s Building Energy Codes Program (BECP) to provide technical support to the development of ANSI/ASHRAE/IES Standard 90.1. While the majority of PNNL’s ASHRAE Standard 90.1 support focuses on developing and evaluating new requirements, a portion of its work involves consideration of the format of energy standards. In its current working plan, the ASHRAE 90.1 committee has approved an energy goalmore » of 50% improvement in Standard 90.1-2013 relative to Standard 90.1-2004, and will likely be considering higher improvement targets for future versions of the standard. To cost-effectively achieve the 50% goal in manner that can gain stakeholder consensus, formats other than prescriptive must be considered. Alternative formats that include reducing the reliance on prescriptive requirements may make it easier to achieve these aggressive efficiency levels in new codes and standards. The focus on energy code and standard formats is meant to explore approaches to presenting the criteria that will foster compliance, enhance verification, and stimulate innovation while saving energy in buildings. New formats may also make it easier for building designers and owners to design and build the levels of efficiency called for in the new codes and standards. This paper examines a number of potential formats and structures, including prescriptive, performance-based (with sub-formats of performance equivalency and performance targets), capacity constraint-based, and outcome-based. The paper also discusses the pros and cons of each format from the viewpoint of code users and of code enforcers.« less

  2. Implementing energy standards for motors and buildings in the Philippines

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wiel, S.; Busch, J.; Sanchez, C.

    1998-07-01

    The Philippines' master plan for energy makes cornerstones of energy standards for appliances, buildings, and motors in their energy efficiency effort. Significant progress has been made in implementing appliance standards for some products, but has lagged for others. This has been partly because the resources allocated have dictated a cautious deliberate approach. Products where there has been a lack of information about the respective markets have received lowest priority. Motors fall in this latter category. In their development of building codes, the Philippine government has also taken a cautious deliberate approach and is just now attending to the compliance ofmore » a commercial building energy performance standard that was enacted into law in 1994. This paper describes the results of recent new buildings and motor market assessments carried out in the Philippines, a survey of building energy code implementation in other countries, and how these products are being used to further implementation of energy standards in the Philippines. Lessons for other countries are drawn from this experience.« less

  3. 7 CFR Exhibit I to Subpart A of... - Guidelines for Seasonal Farm Labor Housing

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... convertible to year-round occupancy; however, the living units shall be designed for the intended type of... is important that the design of the LH site and buildings will help to create a pleasing lifestyle...—Compliance is required with National, state and local codes or regulations affecting design, construction...

  4. A Stable Whole Building Performance Method for Standard 90.1-Part II

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosenberg, Michael I.; Eley, Charles

    2016-06-01

    In May of 2013 we introduced a new approach for compliance with Standard 90.1 that was under development based on the Performance Rating Method of Appendix G to Standard 90.11. Since then, the approach has been finalized through Addendum BM to Standard 90.1-2013 and will be published in the 2016 edition of the Standard. In the meantime, ASHRAE has published an advanced copy of Appendix G including Addendum BM and several other addenda so that software developers and energy program administrators can get a preview of what is coming in the 2016 edition of the Standard2. This article is anmore » update on Addendum BM, summarizes changes made to the original concept as introduced in May of 2013, and provides an approach for developing performance targets for code compliance and beyond code programs.« less

  5. Compliance with self-regulation of television food and beverage advertising aimed at children in Spain.

    PubMed

    Romero-Fernández, Ma Mar; Royo-Bordonada, Miguel Angel; Rodríguez-Artalejo, Fernando

    2010-07-01

    To evaluate the level of compliance with the PAOS Code (Publicidad, Actividad, Obesidad y Salud), which establishes standards for the self-regulation of food marketing aimed at minors, in television advertising by food and beverage companies that have agreed to abide by the Code. The study sample consisted of food and beverage advertisements targeting children during 80 h of programming by four Spanish television networks. The level of compliance with each standard of the PAOS Code was classified into three categories: 'compliance', 'non-compliance' and 'uncertain compliance'. Overall, an advertisement was considered compliant with the PAOS Code if it met all the standards; non-compliant if it contravened one or more standards; and uncertain in all other cases. Of a total of 203 television advertisements from companies that agreed to the PAOS Code, the overall prevalence of non-compliance was 49.3% (v. 50.8% among those that did not agree to the code), with 20.7% of advertisements considered of uncertain compliance. Non-compliance was more frequent on Saturdays, in longer advertisements, in advertisements containing promotions or dairy products, and for advertisements from companies of French or US origin. Non-compliance with the PAOS Code was very high and was similar for companies that did and did not agree to the Code, casting doubt on the Code's effectiveness and oversight system. It seems the time has come to commit to statutory regulations that reduce the negative impact of advertising on children's diets, as demanded by public health experts and consumer associations.

  6. Utility residential new construction programs: Going beyond the code. A report from the Database on Energy Efficiency Programs (DEEP) Project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vine, E.

    Based on an evaluation of 10 residential new construction programs, primarily sponsored by investor-owned utilities in the United States, we find that many of these programs are in dire straits and are in danger of being discontinued because current inclusion of only direct program effects leads to the conclusion that they are not cost-effective. We believe that the cost-effectiveness of residential new construction programs can be improved by: (1) promoting technologies and advanced building design practices that significantly exceed state and federal standards; (2) reducing program marketing costs and developing more effective marketing strategies; (3) recognizing the role of thesemore » programs in increasing compliance with existing state building codes; and (4) allowing utilities to obtain an ``energy-savings credit`` from utility regulators for program spillover (market transformation) impacts. Utilities can also leverage their resources in seizing these opportunities by forming strong and trusting partnerships with the building community and with local and state government.« less

  7. Universal Design as a Booster for Housing Quality and Architectural Practice.

    PubMed

    Denizou, Karine

    2016-01-01

    Norwegian central government has for the last decade increasingly focused on universal design. Fundamental changes in the Norwegian building code and corresponding regulations in 2010 give an apparently clear framework for the implementation of accessibility and universal design. However, it seems that neither increased awareness of accessibility requirements and universal design, nor compliance with the building code guarantees improvement of housing quality and usability. The Norwegian regulations have gone further in the direction of performance requirements than most other countries. This applies to all types of requirements, including requirements for usability, functionality and accessibility. Hardly any specifications are to be found in the regulations. Ideally, this lack of specifications should give designers the opportunity to develop innovative answers and hence to respond to different contexts and needs. Still, many architects and builders ask for clear specifications, in order to simplify and speed up design processes and make control of solutions easier. Many architects understand guidelines as minimum requirements, and are thus reproducing the identical solutions without considering the context and the needs of the users. They see accessibility as another regulatory pressure and requirements as restrictions rather than positive incentives. However, there are examples of designers who have internalised the regulatory framework and thus are able to create and integrate inclusive design in their daily work. Based on recent research conducted by SINTEF Building and Infrastructure and financed by the Norwegian State Housing Bank, this paper presents examples of practice where dwellings have been developed within a framework of universal design. Focus of the research has been on the approach of the design team and their understanding and use of the regulatory framework in order to create better homes in dialogue with the building authorities. Main objectives are to: - Contribute to better understanding of universal design as a tool and a method to improve housing quality and usability - Investigate the conditions for developing dwellings with innovative and functional solutions in compliance with the building code - Discuss challenges in interpreting the requirements and in taking the needs of various resident groups into account.

  8. Disaster Vulnerability of Hospitals: A Nationwide Surveillance in Japan.

    PubMed

    Ochi, Sae; Kato, Shigeaki; Kobayashi, Kenichi; Kanatani, Yasuhiro

    2015-12-01

    Hospital preparedness against disasters is key to achieving disaster mitigation for health. To gain a holistic view of hospitals in Japan, one of the most disaster-prone countries, a nationwide surveillance of hospital preparedness was conducted. A cross-sectional, paper-based interview was conducted that targeted all of the 8701 registered hospitals in Japan. Preparedness was assessed with regard to local hazards, compliance to building code, and preparation of resources such as electricity, water, communication tools, and transportation tools. Answers were obtained from 6122 hospitals (response rate: 70.3%), among which 20.5% were public (national or city-run) hospitals and others were private. Eight percent were the hospitals assigned as disaster-base hospitals and the others were non-disaster-base hospitals. Overall compliance to building code, power generators, water tanks, emergency communication tools, and helicopter platforms was 90%, 84%, 95%, 43%, and 22%, respectively. Major vulnerabilities in logistics in mega-cities and stockpiles required for chronic care emerged from the results of this nationwide surveillance of hospitals in Japan. To conduct further intensive surveillance to meet community health needs, appropriate sampling methods should be established on the basis of this preliminary study. Holistic vulnerability analysis of community hospitals will lead to more robust disaster mitigation at the local level.

  9. A comparative analysis of the dissemination of best practice measures for key populations.

    PubMed

    Lundy, Jennifer; Santangelo, Jennifer; Rogers, Patrick; Kuehn, Lynn; Christensen, Sharon; Bournique, Judy; Mekhjian, Hagop; Kamal, Jyoti

    2008-11-06

    In collaboration with the department of Quality and Operations Improvement, Clinical Applications and the Information Warehouse, we have leveraged available Information Warehouse data to build a Best Practice Compliance Measurement Dashboard. This tool combines information from our operating room charting system, our order entry system and coding information from the patient billing and management system to provide 'previous day', data on a patients current course of treatment.

  10. 7 CFR 1724.50 - Compliance with National Electrical Safety Code (NESC).

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 11 2013-01-01 2013-01-01 false Compliance with National Electrical Safety Code (NESC... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Electric System Design § 1724.50 Compliance with National Electrical Safety Code...

  11. 7 CFR 1724.50 - Compliance with National Electrical Safety Code (NESC).

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Compliance with National Electrical Safety Code (NESC... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Electric System Design § 1724.50 Compliance with National Electrical Safety Code...

  12. 7 CFR 1724.50 - Compliance with National Electrical Safety Code (NESC).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 11 2011-01-01 2011-01-01 false Compliance with National Electrical Safety Code (NESC... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Electric System Design § 1724.50 Compliance with National Electrical Safety Code...

  13. 7 CFR 1724.50 - Compliance with National Electrical Safety Code (NESC).

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 11 2012-01-01 2012-01-01 false Compliance with National Electrical Safety Code (NESC... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Electric System Design § 1724.50 Compliance with National Electrical Safety Code...

  14. 7 CFR 1724.50 - Compliance with National Electrical Safety Code (NESC).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 11 2014-01-01 2014-01-01 false Compliance with National Electrical Safety Code (NESC... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Electric System Design § 1724.50 Compliance with National Electrical Safety Code...

  15. Nonlinear analysis of r.c. framed buildings retrofitted with elastomeric and friction bearings under near-fault earthquakes

    NASA Astrophysics Data System (ADS)

    Mazza, Mirko

    2015-12-01

    Reinforced concrete (r.c.) framed buildings designed in compliance with inadequate seismic classifications and code provisions present in many cases a high vulnerability and need to be retrofitted. To this end, the insertion of a base isolation system allows a considerable reduction of the seismic loads transmitted to the superstructure. However, strong near-fault ground motions, which are characterised by long-duration horizontal pulses, may amplify the inelastic response of the superstructure and induce a failure of the isolation system. The above considerations point out the importance of checking the effectiveness of different isolation systems for retrofitting a r.c. framed structure. For this purpose, a numerical investigation is carried out with reference to a six-storey r.c. framed building, which, primarily designed (as to be a fixed-base one) in compliance with the previous Italian code (DM96) for a medium-risk seismic zone, has to be retrofitted by insertion of an isolation system at the base for attaining performance levels imposed by the current Italian code (NTC08) in a high-risk seismic zone. Besides the (fixed-base) original structure, three cases of base isolation are studied: elastomeric bearings acting alone (e.g. HDLRBs); in-parallel combination of elastomeric and friction bearings (e.g. high-damping-laminated-rubber bearings, HDLRBs and steel-PTFE sliding bearings, SBs); friction bearings acting alone (e.g. friction pendulum bearings, FPBs). The nonlinear analysis of the fixed-base and base-isolated structures subjected to horizontal components of near-fault ground motions is performed for checking plastic conditions at the potential critical (end) sections of the girders and columns as well as critical conditions of the isolation systems. Unexpected high values of ductility demand are highlighted at the lower floors of all base-isolated structures, while re-centring problems of the base isolation systems under near-fault earthquakes are expected in case of friction bearings acting alone (i.e. FPBs) or that in combination (i.e. SBs) with HDLRBs.

  16. 77 FR 43645 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-25

    ...] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 of the Code of Federal... Transportation (CSX), has petitioned the Federal Railroad Administration (FRA) for a waiver of compliance from... Compliance. [FR Doc. 2012-18081 Filed 7-24-12; 8:45 am] BILLING CODE 4910-06-P ...

  17. Cracking the Code: Assessing Institutional Compliance with the Australian Code for the Responsible Conduct of Research

    ERIC Educational Resources Information Center

    Morris, Suzanne E.

    2010-01-01

    This paper provides a review of institutional authorship policies as required by the "Australian Code for the Responsible Conduct of Research" (the "Code") (National Health and Medical Research Council (NHMRC), the Australian Research Council (ARC) & Universities Australia (UA) 2007), and assesses them for Code compliance.…

  18. Profile of the wood furniture and fixtures industry. EPA Office of Compliance sector notebook project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1995-09-01

    The furniture and fixtures industry encompasses companies that manufacture household, office, store, public building, and restaurant furniture and fixtures. The second section provides background information on the size, geographic distribution, employment, production, sales, and economic condition of the Wood Furniture and Fixtures industry. The type of facilities described within the document are also described in terms of their Standard Industrial Classification (SIC) codes. Additionally, this section contains a list of the largest companies in terms of sales.

  19. The Marriage of Residential Energy Codes and Rating Systems: Conflict Resolution or Just Conflict?

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Taylor, Zachary T.; Mendon, Vrushali V.

    2014-08-21

    After three decades of coexistence at a distance, model residential energy codes and residential energy rating systems have come together in the 2015 International Energy Conservation Code. At the October, 2013, International Code Council’s Public Comment Hearing, a new compliance path based on an Energy Rating Index was added to the IECC. Although not specifically named in the code, RESNET’s HERS rating system is the likely candidate Index for most jurisdictions. While HERS has been a mainstay in various beyond-code programs for many years, its direct incorporation into the most popular model energy code raises questions about the equivalence ofmore » a HERS-based compliance path and the traditional IECC performance compliance path, especially because the two approaches use different efficiency metrics, are governed by different simulation rules, and have different scopes with regard to energy impacting house features. A detailed simulation analysis of more than 15,000 house configurations reveals a very large range of HERS Index values that achieve equivalence with the IECC’s performance path. This paper summarizes the results of that analysis and evaluates those results against the specific Energy Rating Index values required by the 2015 IECC. Based on the home characteristics most likely to result in disparities between HERS-based compliance and performance path compliance, potential impacts on the compliance process, state and local adoption of the new code, energy efficiency in the next generation of homes subject to this new code, and future evolution of model code formats are discussed.« less

  20. SNL/CA Facilities Management Design Standards Manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rabb, David; Clark, Eva

    2014-12-01

    At Sandia National Laboratories in California (SNL/CA), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/CA applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. The safetymore » and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule.« less

  1. Using Third-Party Inspectors in Building Energy Codes Enforcement in India

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yu, Sha; Evans, Meredydd; Kumar, Pradeep

    India is experiencing fast income growth and urbanization, and this leads to unprecedented increases in demand for building energy services and resulting energy consumption. In response to rapid growth in building energy use, the Government of India issued the Energy Conservation Building Code (ECBC) in 2007, which is consistent with and based on the 2001 Energy Conservation Act. ECBC implementation has been voluntary since its enactment and a few states have started to make progress towards mandatory implementation. Rajasthan is the first state in India to adopt ECBC as a mandatory code. The State adopted ECBC with minor additions onmore » March 28, 2011 through a stakeholder process; it became mandatory in Rajasthan on September 28, 2011. Tamil Nadu, Gujarat, and Andhra Pradesh have started to draft an implementation roadmap and build capacity for its implementation. The Bureau of Energy Efficiency (BEE) plans to encourage more states to adopt ECBC in the near future, including Haryana, Uttar Pradesh, Karnataka, Maharashtra, West Bengal, and Delhi. Since its inception, India has applied the code on a voluntary basis, but the Government of India is developing a strategy to mandate compliance. Implementing ECBC requires coordination between the Ministry of Power and the Ministry of Urban Development at the national level as well as interdepartmental coordination at the state level. One challenge is that the Urban Local Bodies (ULBs), the enforcement entities of building by-laws, lack capacity to implement ECBC effectively. For example, ULBs in some states might find the building permitting procedures to be too complex; in other cases, lack of awareness and technical knowledge on ECBC slows down the amendment of local building by-laws as well as ECBC implementation. The intent of this white paper is to share with Indian decision-makers code enforcement approaches: through code officials, third-party inspectors, or a hybrid approach. Given the limited capacity and human resources available in the state and local governments, involving third-party inspectors could rapidly expand the capacity for plan reviews and broad implementation. However, the procedures of involving third-parties need to be carefully designed in order to guarantee a fair process. For example, there should be multiple checks and certification requirements for third-party inspectors, and the government should have the final approval when third-party inspectors are used in a project. This paper discusses different approaches of involving third-parties in ECBC enforcement; the Indian states may choose the approaches that work best in their given circumstances.« less

  2. Joint China-United States Report for Year 1 Insulation Materials and Systems Project Area Clean Energy Research Center Building Energy Efficiency (CERC-BEE)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stovall, Therese K; Biswas, Kaushik; Song, Bo

    In November of 2009, the presidents of China and the U.S. announced the establishment of the Clean Energy Research Center (CERC). This broad research effort is co-funded by both countries and involves a large number of research centers and universities in both countries. One part of this program is focused on improving the energy efficiency of buildings. One portion of the CERC-BEE was focused on building insulation systems. The research objective of this effort was to Identify and investigate candidate high performance fire resistant building insulation technologies that meet the goal of building code compliance for exterior wall applications inmore » green buildings in multiple climate zones. A Joint Work Plan was established between researchers at the China Academy of Building Research and Oak Ridge National Laboratory. Efforts in the first year under this plan focused on information gathering. The objective of this research program is to reduce building energy use in China via improved building insulation technology. In cold regions in China, residents often use inefficient heating systems to provide a minimal comfort level within inefficient buildings. In warmer regions, air conditioning has not been commonly used. As living standards rise, energy consumption in these regions will increase dramatically unless significant improvements are made in building energy performance. Previous efforts that defined the current state of the built environment in China and in the U.S. will be used in this research. In countries around the world, building improvements have typically followed the implementation of more stringent building codes. There have been several changes in building codes in both the U.S. and China within the last few years. New U.S. building codes have increased the amount of wall insulation required in new buildings. New government statements from multiple agencies in China have recently changed the requirements for buildings in terms of energy efficiency and fire safety. A related issue is the degree to which new standards are adopted and enforced. In the U.S., standards are developed using a consensus process, and local government agencies are free to implement these standards or to ignore them. For example, some U.S. states are still using 2003 versions of the building efficiency standards. There is also a great variation in the degree to which the locally adopted standards are enforced in different U.S. cities and states. With a more central process in China, these issues are different, but possible impacts of variable enforcement efficacy may also exist. Therefore, current building codes in China will be compared to the current state of building fire-safety and energy-efficiency codes in the U.S. and areas for possible improvements in both countries will be explored. In particular, the focus of the applications in China will be on green buildings. The terminology of 'green buildings' has different meanings to different audiences. The U.S. research is interested in both new, green buildings, and on retrofitting existing inefficient buildings. An initial effort will be made to clarify the scope of the pertinent wall insulation systems for these applications.« less

  3. Evaluation of compliance with the Spanish Code of self-regulation of food and drinks advertising directed at children under the age of 12 years in Spain, 2012.

    PubMed

    León-Flández, K; Rico-Gómez, A; Moya-Geromin, M Á; Romero-Fernández, M; Bosqued-Estefania, M J; Damián, J; López-Jurado, L; Royo-Bordonada, M Á

    2017-09-01

    To evaluate compliance levels with the Spanish Code of self-regulation of food and drinks advertising directed at children under the age of 12 years (Publicidad, Actividad, Obesidad, Salud [PAOS] Code) in 2012; and compare these against the figures for 2008. Cross-sectional study. Television advertisements of food and drinks (AFD) were recorded over 7 days in 2012 (8am-midnight) of five Spanish channels popular to children. AFD were classified as core (nutrient-rich/low-calorie products), non-core (nutrient-poor/rich-calorie products) or miscellaneous. Compliance with each standard of the PAOS Code was evaluated. AFD were deemed to be fully compliant when it met all the standards. Two thousand five hundred and eighty-two AFDs came within the purview of the PAOS Code. Some of the standards that registered the highest levels of non-compliance were those regulating the suitability of the information presented (79.4%) and those prohibiting the use of characters popular with children (25%). Overall non-compliance with the Code was greater in 2012 than in 2008 (88.3% vs 49.3%). Non-compliance was highest for advertisements screened on children's/youth channels (92.3% vs. 81.5%; P < 0.001) and for those aired outside the enhanced protection time slot (89.3% vs. 86%; P = 0.015). Non-compliance with the PAOS Code is higher than for 2008. Given the lack of effectiveness of self-regulation, a statutory system should be adopted to ban AFD directed at minors, or at least restrict it to healthy products. Copyright © 2017 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

  4. Compliance Timeline, Compliance Options, and Required Notifications for Surface Coating of Wood Building Products National Emission Standards for Hazardous Air Pollutants (NESHAP)

    EPA Pesticide Factsheets

    This January 2005 document contains a diagram of dates and events for compliance with the NESHAP for surface coating of wood building products. Also on this page is a January 2005 document with flow charts to demonstrate compliance options for the NESHAP

  5. 29 CFR 1910.35 - Compliance with NFPA 101-2000, Life Safety Code.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 5 2011-07-01 2011-07-01 false Compliance with NFPA 101-2000, Life Safety Code. 1910.35 Section 1910.35 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Means of Egress § 1910.35 Compliance...

  6. 42 CFR 137.368 - Is the Secretary responsible for oversight and compliance of health and safety codes during...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... compliance of health and safety codes during construction projects being performed by a Self-Governance Tribe... SERVICES TRIBAL SELF-GOVERNANCE Construction Roles of the Secretary in Establishing and Implementing Construction Project Agreements § 137.368 Is the Secretary responsible for oversight and compliance of health...

  7. Compliance with Baby-Friendly policies and practices in hospitals and community health centers in Quebec.

    PubMed

    Haiek, Laura N

    2012-08-01

    Since 2001, Quebec's ministry of health and social services has prioritized implementation of the Baby-Friendly Initiative (BFI), which includes the original hospital initiative and its expansion to community services. The objective was to document across the province compliance with the BFI's Ten Steps to Successful Breastfeeding in hospitals, Seven Point Plan in community health centers (CHCs), and International Code of Marketing of Breast-Milk Substitutes (Code). Using managers/staff, mothers, and observers, the author measured the extent of implementation of indicators formulated for each step/point and the Code, based on the revised WHO/UNICEF recommendations. Mean compliance scores in Quebec were 3.13 for 140 CHCs (range, 0 to 7) and 4.54 for 60 hospitals/birthing centers (range, 0 to 10). The mean compliance score for the Code was 0.69 for both CHCs and hospitals/birthing centers. The evaluation documented marked variations in implementation level for each of the steps/points and the Code. Also, managers/staff, mothers, and observers differed in their report of BFI compliance for most steps/points and the Code. Facilities that had applied for or obtained BFI designation demonstrated higher compliance with the BFI than those that had not. Results disseminated to participating organizations allowed comparisons on a regional/provincial perspective and in relation to BFI-designated facilities. Furthermore, this first portrait of BFI compliance in Quebec provided provincial, regional, and local health authorities with valuable information that can be used to bring about policy and organizational changes to achieve the international standards required for Baby-Friendly certification.

  8. System implications of the ambulance arrival-to-patient contact interval on response interval compliance.

    PubMed

    Campbell, J P; Gratton, M C; Salomone, J A; Lindholm, D J; Watson, W A

    1994-01-01

    In some emergency medical services (EMS) system designs, response time intervals are mandated with monetary penalties for noncompliance. These times are set with the goal of providing rapid, definitive patient care. The time interval of vehicle at scene-to-patient access (VSPA) has been measured, but its effect on response time interval compliance has not been determined. To determine the effect of the VSPA interval on the mandated code 1 (< 9 min) and code 2 (< 13 min) response time interval compliance in an urban, public-utility model system. A prospective, observational study used independent third-party riders to collect the VSPA interval for emergency life-threatening (code 1) and emergency nonlife-threatening (code 2) calls. The VSPA interval was added to the 9-1-1 call-to-dispatch and vehicle dispatch-to-scene intervals to determine the total time interval from call received until paramedic access to the patient (9-1-1 call-to-patient access). Compliance with the mandated response time intervals was determined using the traditional time intervals (9-1-1 call-to-scene) plus the VSPA time intervals (9-1-1 call-to-patient access). Chi-square was used to determine statistical significance. Of the 216 observed calls, 198 were matched to the traditional time intervals. Sixty-three were code 1, and 135 were code 2. Of the code 1 calls, 90.5% were compliant using 9-1-1 call-to-scene intervals dropping to 63.5% using 9-1-1 call-to-patient access intervals (p < 0.0005). Of the code 2 calls, 94.1% were compliant using 9-1-1 call-to-scene intervals. Compliance decreased to 83.7% using 9-1-1 call-to-patient access intervals (p = 0.012). The addition of the VSPA interval to the traditional time intervals impacts system response time compliance. Using 9-1-1 call-to-scene compliance as a basis for measuring system performance underestimates the time for the delivery of definitive care. This must be considered when response time interval compliances are defined.

  9. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Springer, David; German, Alea

    Building cost-effective, high-performance homes that provide superior comfort, health, and durability is the goal of the U.S. Department of Energy’s (DOE’s) Zero Energy Ready Home (ZERH) program. Building America research and other innovative programs throughout the country have addressed many of the technical challenges of building to the ZERH standard. The cost-effectiveness of measure packages that result in 30% source energy savings compared to a code-compliant home have been demonstrated. However, additional challenges remain, particularly with respect to convincing production builders of the strong business case for ZERH. The Alliance for Residential Building Innovation (ARBI) team believes that the keysmore » to successfully engaging builders and developers in the California market are to help them leverage development agreement requirements, code compliance requirements, incentives, and competitive market advantages of ZERH certification, and navigate through this process. A primary objective of this project was to gain a highly visible foothold for residential buildings that are built to the DOE ZERH specification that can be used to encourage participation by other California builders. This report briefly describes two single-family homes that were ZERH certified and focuses on the experience of working with developer Mutual Housing on a 62-unit multifamily community at the Spring Lake subdivision in Woodland, California. The Spring Lake project is expected to be the first ZERH-certified multifamily project in the country. This report discusses the challenges encountered, lessons learned, and how obstacles were overcome.« less

  10. Building energy simulation in real time through an open standard interface

    DOE PAGES

    Pang, Xiufeng; Nouidui, Thierry S.; Wetter, Michael; ...

    2015-10-20

    Building energy models (BEMs) are typically used for design and code compliance for new buildings and in the renovation of existing buildings to predict energy use. We present the increasing adoption of BEM as standard practice in the building industry presents an opportunity to extend the use of BEMs into construction, commissioning and operation. In 2009, the authors developed a real-time simulation framework to execute an EnergyPlus model in real time to improve building operation. This paper reports an enhancement of that real-time energy simulation framework. The previous version only works with software tools that implement the custom co-simulation interfacemore » of the Building Controls Virtual Test Bed (BCVTB), such as EnergyPlus, Dymola and TRNSYS. The new version uses an open standard interface, the Functional Mockup Interface (FMI), to provide a generic interface to any application that supports the FMI protocol. In addition, the new version utilizes the Simple Measurement and Actuation Profile (sMAP) tool as the data acquisition system to acquire, store and present data. Lastly, this paper introduces the updated architecture of the real-time simulation framework using FMI and presents proof-of-concept demonstration results which validate the new framework.« less

  11. Associations between membership of farm assurance and organic certification schemes and compliance with animal welfare legislation.

    PubMed

    KilBride, A L; Mason, S A; Honeyman, P C; Pritchard, D G; Hepple, S; Green, L E

    2012-02-11

    Animal health (AH) defines the outcome of their inspections of livestock holdings as full compliance with the legislation and welfare code (A), compliance with the legislation but not the code (B), non-compliance with legislation but no pain, distress or suffering obvious in the animals (C) or evidence of unnecessary pain or unnecessary distress (D). The aim of the present study was to investigate whether membership of farm assurance or organic certification schemes was associated with compliance with animal welfare legislation as inspected by AH. Participating schemes provided details of their members, past and present, and these records were matched against inspection data from AH. Multivariable multilevel logistic binomial models were built to investigate the association between compliance with legislation and membership of a farm assurance/organic scheme. The percentage of inspections coded A, B, C or D was 37.1, 35.6, 20.2 and 7.1 per cent, respectively. Once adjusted for year, country, enterprise, herd size and reason for inspection, there was a pattern of significantly reduced risk of codes C and D compared with A and B, in certified enterprises compared with the enterprises that were not known to be certified in all species.

  12. Marketing of breast-milk substitutes in Zambia: evaluation of compliance to the international regulatory code.

    PubMed

    Funduluka, P; Bosomprah, S; Chilengi, R; Mugode, R H; Bwembya, P A; Mudenda, B

    2018-03-01

    We sought to assess the level of non-compliance with the International Code of Marketing breast-milk substitutes (BMS) and/or Statutory Instrument (SI) Number 48 of 2006 of the Laws of Zambia in two suburbs, Kalingalinga and Chelstone, in Zambia. This was a cross sectional survey. Shop owners (80), health workers (8) and mothers (214) were interviewed. BMS labels and advertisements (62) were observed. The primary outcome was mean non-compliance defined as the number of article violations divided by the total 'obtainable' violations. The score ranges from 0 to 1 with 0 representing no violations in all the articles and one representing violations in all the articles. A total of 62 BMS were assessed. The mean non-compliance score by manufacturers in terms of violations in labelling of BMS was 0.33 (SD = 0.28; 95% CI: 0.26, 0.40). These violations were mainly due to labels containing pictures or graphics representing an infant. 80 shops were also assessed with mean non-compliance score in respect of violations in tie-in-sales, special display, and contact with mothers at the shop estimated as 0.14 (SD = 0.14; 95% CI: 0.11, 0.18). Non-compliance with the Code and/or the local SI is high after 10 years of domesticating the Code.

  13. Certification of Compliance Audit Checklist for Hazardous Waste Containment Buildings

    EPA Pesticide Factsheets

    Example of a Certification of Compliance Audit Checklist General Information: Containment Buildings, which includes a fillable table with areas to list requirements, federal regulations, descriptions, locations of information, and criteria met.

  14. Mobile App to Assess Universal Access Compliance.

    PubMed

    Fransolet, Colette

    2016-01-01

    In terms of local legislation, South Africa has a handful of regulations that indirectly require Universal Access, which is then in itself largely described as facilities for people with disabilities. The most predominant set of regulations is the South African National Building Regulations, with a specific code which is deemed to satisfy standard titled South African National Standard (SANS) 10400 Part S: Facilities for Persons with Disabilities. Revised in 2011, this building regulation offers some technical guidelines specific to built infrastructure, and largely for people with functional mobility limitations. The description of the term "functional mobility limitations" in the context of this paper refers to people who make use of mobility aids to assist with their functionality in an environment, for example people who use walking aids (sticks, canes or walkers) and people who use wheelchairs. Albeit lacking in specifics around the requirements for other areas of functional limitations, including people who are blind, people who are deaf, and people with cognitive limitations, the SANS 10400 Part S is, to date, the most effective regulatory requirement in the country to assist with making facilities more accessible. With only a few experts in South Africa working in the field, the ability to offer clients Universal Access Reviews in terms of basic compliance with the SANS 10400 Part S is limited by two major factors. Firstly, the costs associated with employing experts in the field to review infrastructure is mostly too exorbitant for clients to carry. Secondly, the amount of time taken to perform reviews onsite and then collate the information into a coherent report for the client is far too long. These aspects result in a gap between clients wanting to meet the requirements, and being able to have the work completed in a reasonable amount of time. To overcome the challenge of larger institutions and organizations wanting to have their facilities reviewed in terms of compliance with National Building Regulations, within a tight budget as well as within minimal timeframes, an innovative mobile application was developed by Universal Design Africa. This App heralds the dawn of a new method to measure universal access compliance. The operation and format of this technology and its application could be adapted to meet all forms of compliance and information gathering, including international regulations and best practice.

  15. Guidance regarding voluntary compliance with international management code for the safe operation of ships and for pollution prevention

    DOT National Transportation Integrated Search

    1994-03-15

    The purpose of this Circular is to advise owners and operators of U.S. flag merchant vessels regarding voluntary compliance with the International Management Code for the Safe Operation of Ships and for Pollution Prevention.

  16. Evaluation of Safety, Quality and Productivity in Construction

    NASA Astrophysics Data System (ADS)

    Usmen, M. A.; Vilnitis, M.

    2015-11-01

    This paper examines the success indicators of construction projects, safety, quality and productivity, in terms of their implications and impacts during and after construction. First safety is considered during construction with a focus on hazard identification and the prevention of occupational accidents and injuries on worksites. The legislation mandating safety programs, training and compliance with safety standards is presented and discussed. Consideration of safety at the design stage is emphasized. Building safety and the roles of building codes in prevention of structural failures are also covered in the paper together with factors affecting building failures and methods for their prevention. Quality is introduced in the paper from the perspective of modern total quality management. Concepts of quality management, quality control, quality assurance and Six Sigma and how they relate to building quality and structural integrity are discussed with examples. Finally, productivity concepts are presented with emphasis on effective project management to minimize loss of productivity, complimented by lean construction and lean Six Sigma principles. The paper concludes by synthesizing the relationships between safety, quality and productivity.

  17. Country Report on Building Energy Codes in Australia

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Shui, Bin; Evans, Meredydd; Somasundaram, Sriram

    2009-04-02

    This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America (U.S.). This reports gives an overview of the development of building energy codes in Australia, including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope, HVAC, and lighting) for commercial and residential buildings in Australia.

  18. 78 FR 46681 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-01

    ...] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 Code of Federal Regulations (CFR... compliance from certain provisions of the Federal railroad safety regulations contained at 49 CFR Part 214... all work for compliance with the requirements of the protection procedures and would ensure that all...

  19. 76 FR 38456 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-30

    ...] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 of the Code of Federal... Administration (FRA) for a waiver of compliance from certain provisions of the Federal railroad safety...- 0048. TriMet has petitioned FRA for a waiver of compliance from certain provisions of the Federal...

  20. 76 FR 38453 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-30

    ...] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 of the Code of Federal... compliance from certain provisions of the Federal railroad safety regulations contained at 49 CFR Parts 215... waiver of compliance from certain provisions of the Railroad Freight Car Safety Standards, 49 CFR 215.303...

  1. 76 FR 38454 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-30

    ...] Petition for Waiver of Compliance In accordance with part 211 of Title 49 of the Code of Federal... of compliance from certain provisions of the Federal railroad safety regulations contained at 49 CFR... a waiver of compliance from the Railroad Freight Car Safety Standards, 49 CFR 215.303, which...

  2. 76 FR 39977 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    ...] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 of the Code of Federal... compliance from certain provisions of the Federal railroad safety regulations contained at 49 CFR 215.303... waiver of compliance from certain provisions of the Railroad Freight Car Safety Standards, 49 CFR 215.303...

  3. 10 CFR 435.305 - Alternative compliance procedure.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Alternative compliance procedure. 435.305 Section 435.305 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS FOR NEW FEDERAL LOW-RISE RESIDENTIAL BUILDINGS Mandatory Energy Efficiency Standards for Federal Residential Buildings § 435.305...

  4. 24 CFR 941.203 - Design and construction standards.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... national building code, such as Uniform Building Code, Council of American Building Officials Code, or Building Officials Conference of America Code; (2) Applicable State and local laws, codes, ordinances, and... intended to serve. Building design and construction shall strive to encourage in residents a proprietary...

  5. 7 CFR 4274.337 - Other regulatory requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... with the seismic provisions of one of the following model building codes or the latest edition of that...) Uniform Building Code; (ii) 1993 Building Officials and Code Administrators International, Inc. (BOCA) National Building Code; or (iii) 1992 Amendments to the Southern Building Code Congress International...

  6. 7 CFR 4274.337 - Other regulatory requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... with the seismic provisions of one of the following model building codes or the latest edition of that...) Uniform Building Code; (ii) 1993 Building Officials and Code Administrators International, Inc. (BOCA) National Building Code; or (iii) 1992 Amendments to the Southern Building Code Congress International...

  7. 24 CFR 941.203 - Design and construction standards.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... national building code, such as Uniform Building Code, Council of American Building Officials Code, or Building Officials Conference of America Code; (2) Applicable State and local laws, codes, ordinances, and... intended to serve. Building design and construction shall strive to encourage in residents a proprietary...

  8. 41 CFR 128-1.8005 - Seismic safety standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... the model building codes that the Interagency Committee on Seismic Safety in Construction (ICSSC...) Uniform Building Code (UBC); (2) The 1992 Supplement to the Building Officials and Code Administrators International (BOCA) National Building Code (NBC); and (3) The 1992 Amendments to the Southern Building Code...

  9. 7 CFR 4274.337 - Other regulatory requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... with the seismic provisions of one of the following model building codes or the latest edition of that...) Uniform Building Code; (ii) 1993 Building Officials and Code Administrators International, Inc. (BOCA) National Building Code; or (iii) 1992 Amendments to the Southern Building Code Congress International...

  10. 41 CFR 128-1.8005 - Seismic safety standards.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... the model building codes that the Interagency Committee on Seismic Safety in Construction (ICSSC...) Uniform Building Code (UBC); (2) The 1992 Supplement to the Building Officials and Code Administrators International (BOCA) National Building Code (NBC); and (3) The 1992 Amendments to the Southern Building Code...

  11. 41 CFR 128-1.8005 - Seismic safety standards.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... the model building codes that the Interagency Committee on Seismic Safety in Construction (ICSSC...) Uniform Building Code (UBC); (2) The 1992 Supplement to the Building Officials and Code Administrators International (BOCA) National Building Code (NBC); and (3) The 1992 Amendments to the Southern Building Code...

  12. 41 CFR 128-1.8005 - Seismic safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the model building codes that the Interagency Committee on Seismic Safety in Construction (ICSSC...) Uniform Building Code (UBC); (2) The 1992 Supplement to the Building Officials and Code Administrators International (BOCA) National Building Code (NBC); and (3) The 1992 Amendments to the Southern Building Code...

  13. 78 FR 46680 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-01

    ...] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 Code of Federal Regulations (CFR... Administration (FRA) for a waiver of compliance from certain provisions of the Federal railroad safety.... Specifically, AAR seeks a waiver of compliance from Part 232, Appendix B, Part 232 Prior to May 31, 2001 as...

  14. 78 FR 28284 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-14

    ...] Petition for Waiver of Compliance In accordance with part 211 of Title 49 Code of Federal Regulations (CFR... extension of a waiver of compliance from certain provisions of the Federal railroad safety regulations... compliance from the safety glazing provisions of 49 CFR 223.9(a) and from the requirements of 49 CFR 231.30(c...

  15. 77 FR 6171 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-07

    ...] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 of the Code of Federal... request for a waiver of compliance from certain requirements of its safety standards. In a letter dated... permanent waiver of compliance for one switching locomotive (HVRM 11) from the requirements of 49 CFR part...

  16. 12 CFR 1807.503 - Project completion.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... applicable: One of three model codes (Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI)); or the Council of American Building Officials (CABO) one or two family... must meet the current edition of the Model Energy Code published by the Council of American Building...

  17. 12 CFR 1807.503 - Project completion.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... applicable: One of three model codes (Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI)); or the Council of American Building Officials (CABO) one or two family... must meet the current edition of the Model Energy Code published by the Council of American Building...

  18. 12 CFR 1807.503 - Project completion.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... applicable: One of three model codes (Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI)); or the Council of American Building Officials (CABO) one or two family... must meet the current edition of the Model Energy Code published by the Council of American Building...

  19. 12 CFR 1807.503 - Project completion.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... applicable: One of three model codes (Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI)); or the Council of American Building Officials (CABO) one or two family... must meet the current edition of the Model Energy Code published by the Council of American Building...

  20. Country Report on Building Energy Codes in Canada

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Shui, Bin; Evans, Meredydd

    2009-04-06

    This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America . This reports gives an overview of the development of building energy codes in Canada, including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope, HVAC, lighting, and water heating) for commercial and residential buildingsmore » in Canada.« less

  1. 36 CFR 909.170 - Compliance procedures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Compliance procedures. 909... PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION § 909.170 Compliance procedures. (a) Except as provided in... Barriers Compliance Board upon receipt of any complaint alleging that a building or facility that is...

  2. 45 CFR 1153.170 - Compliance procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Compliance procedures. 1153.170 Section 1153.170... PROGRAMS OR ACTIVITIES CONDUCTED BY THE NATIONAL ENDOWMENT FOR THE ARTS § 1153.170 Compliance procedures... and Transportation Barriers Compliance Board upon receipt of any complaint alleging that a building or...

  3. 78 FR 21705 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-11

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [Docket Number FRA-2012-0097] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 Code of Federal Regulations (CFR... Federal Railroad Administration (FRA) for a waiver of compliance from certain [[Page 21706

  4. 78 FR 28283 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-14

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [Docket Number FRA-2013-0031] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 Code of Federal Regulations (CFR... for a waiver of compliance from certain provisions of the Federal railroad safety regulations...

  5. Tribal Green Building Administrative Code Example

    EPA Pesticide Factsheets

    This Tribal Green Building Administrative Code Example can be used as a template for technical code selection (i.e., building, electrical, plumbing, etc.) to be adopted as a comprehensive building code.

  6. 10 CFR 435.305 - Alternative compliance procedure.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Alternative compliance procedure. 435.305 Section 435.305... Alternative compliance procedure. (a) If a proposed building design includes unusual or innovative energy... estimated unit energy cost on the compliance forms, on the basis of selecting the optimum levels on the...

  7. 10 CFR 435.305 - Alternative compliance procedure.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Alternative compliance procedure. 435.305 Section 435.305... Alternative compliance procedure. (a) If a proposed building design includes unusual or innovative energy... estimated unit energy cost on the compliance forms, on the basis of selecting the optimum levels on the...

  8. 10 CFR 435.305 - Alternative compliance procedure.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Alternative compliance procedure. 435.305 Section 435.305... Alternative compliance procedure. (a) If a proposed building design includes unusual or innovative energy... estimated unit energy cost on the compliance forms, on the basis of selecting the optimum levels on the...

  9. 45 CFR 1181.170 - Compliance procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Compliance procedures. 1181.170 Section 1181.170... Compliance procedures. (a) Except as provided in paragraph (b) of this section, this section applies to all... Transportation Barriers Compliance Board upon receipt of any complaint alleging that a building or facility that...

  10. 34 CFR 105.41 - Compliance procedures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Compliance procedures. 105.41 Section 105.41 Education... DEPARTMENT OF EDUCATION § 105.41 Compliance procedures. (a) Except as provided in paragraph (b) of this... Transportation Barriers Compliance Board upon receipt of any complaint alleging that a building or facility that...

  11. Environmental Compliance Assessment Management Program (ECAMP) - U.S. Fish and Wildlife Service (FWS)

    DTIC Science & Technology

    1994-06-01

    and Wildlife Service, began research on the Environmental Compliance Assessment and Management Program (ECAMP). The concept was to combine Code of ... The number of environmental laws and regulations have continued to grow in the United States and worldwide, making compliance with these regulations...Service has adopted an environmental compliance program that identifies compliance problems before they are cited as violations by the U.S

  12. A long-term, integrated impact assessment of alternative building energy code scenarios in China

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yu, Sha; Eom, Jiyong; Evans, Meredydd

    2014-04-01

    China is the second largest building energy user in the world, ranking first and third in residential and commercial energy consumption. Beginning in the early 1980s, the Chinese government has developed a variety of building energy codes to improve building energy efficiency and reduce total energy demand. This paper studies the impact of building energy codes on energy use and CO2 emissions by using a detailed building energy model that represents four distinct climate zones each with three building types, nested in a long-term integrated assessment framework GCAM. An advanced building stock module, coupled with the building energy model, ismore » developed to reflect the characteristics of future building stock and its interaction with the development of building energy codes in China. This paper also evaluates the impacts of building codes on building energy demand in the presence of economy-wide carbon policy. We find that building energy codes would reduce Chinese building energy use by 13% - 22% depending on building code scenarios, with a similar effect preserved even under the carbon policy. The impact of building energy codes shows regional and sectoral variation due to regionally differentiated responses of heating and cooling services to shell efficiency improvement.« less

  13. Non-compliance with the International Code of Marketing of Breast Milk Substitutes is not confined to the infant formula industry.

    PubMed

    Forsyth, Stewart

    2013-06-01

    Infant feeding policy and practice continues to be a contentious area of global health care. The infant formula industry is widely considered to be the bête noire with frequent claims that they adopt marketing and sales practices that are not compliant with the WHO Code. However, failure to resolve these issues over three decades suggests that there may be wider systemic failings. Review of published papers, commentaries and reports relating to the implementation and governance of the WHO Code with specific reference to issues of non-compliance. The analysis set out in this paper indicates that there are systemic failings at all levels of the implementation and monitoring process including the failure of WHO to successfully 'urge' governments to implement the Code in its entirety; a lack of political will by Member States to implement and monitor the Code and a lack of formal and transparent governance structures. Non-compliance with the WHO Code is not confined to the infant formula industry and several actions are identified, including the need to address issues of partnership working and the establishment of governance systems that are robust, independent and transparent.

  14. 77 FR 25783 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-01

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [Docket Number FRA-2012-0034] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 Code of Federal Regulations (CFR..., Iowa (City), has petitioned the Federal Railroad Administration (FRA) for a waiver of compliance from...

  15. 77 FR 25228 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-27

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [Docket Number FRA-2012-0030] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 Code of Federal Regulations (CFR..., CA (City), has petitioned the Federal Railroad Administration (FRA) for a waiver of compliance from...

  16. 78 FR 46679 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-01

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [Docket Number FRA-2013-0057] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 of the Code of Federal... of compliance from certain provisions of the Federal railroad safety regulations contained at 49 CFR...

  17. 76 FR 38453 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-30

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [ Docket Number FRA-2011-0049] Petition for Waiver of Compliance In accordance with part 211 of Title 49 of the Code of Federal... railroads has petitioned the Federal Railroad Administration (FRA) for a waiver of compliance from certain...

  18. 75 FR 82140 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-29

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration Petition for Waiver of Compliance In accordance with Title 49 Code of Federal Regulations (CFR) Part 211, notice is hereby given that the Federal Railroad Administration (FRA) has received a request for a waiver of compliance from certain requirements...

  19. 77 FR 25228 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-27

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [Docket Number FRA-2012-0031] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 Code of Federal Regulations (CFR... Sacramento, CA (City), has petitioned the Federal Railroad Administration (FRA) for a waiver of compliance...

  20. 76 FR 21096 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-14

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [Docket Number FRA-2010-0152] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 of the Code of Federal... initial boundaries, see FRA's Notice of Petition for Waiver of Compliance published on November 2, 2010...

  1. 78 FR 28283 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-14

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [Docket Number FRA-2013-0006] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 Code of Federal Regulations (CFR... Company (PICK) has petitioned the Federal Railroad Administration (FRA) for a waiver of compliance from...

  2. 76 FR 38455 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-30

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [Docket Number FRA-2006-24216] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 of the Code of Federal... waiver of compliance from certain provisions of the Federal railroad safety regulations contained at 49...

  3. 77 FR 43645 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-25

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [Docket Number FRA-2012-0052] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 of the Code of Federal... (FRA) for a waiver of compliance from certain Federal hours of service requirements for train employees...

  4. 24 CFR 92.251 - Property standards.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., as applicable, one of three model codes: Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI); or the Council of American Building Officials (CABO) one or two...) Housing that is constructed or rehabilitated with HOME funds must meet all applicable local codes...

  5. 24 CFR 92.251 - Property standards.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., as applicable, one of three model codes: Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI); or the Council of American Building Officials (CABO) one or two...) Housing that is constructed or rehabilitated with HOME funds must meet all applicable local codes...

  6. 24 CFR 92.251 - Property standards.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., as applicable, one of three model codes: Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI); or the Council of American Building Officials (CABO) one or two...) Housing that is constructed or rehabilitated with HOME funds must meet all applicable local codes...

  7. 24 CFR 92.251 - Property standards.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., as applicable, one of three model codes: Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI); or the Council of American Building Officials (CABO) one or two...) Housing that is constructed or rehabilitated with HOME funds must meet all applicable local codes...

  8. Building America Case Study: Sealed Crawl Spaces with Integrated Whole-House Ventilation in a Cold Climate, Ithaca, New York

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    "9One method of code-compliance for crawlspaces is to seal and insulate the crawlspace, rather than venting to the outdoors. However, codes require mechanical ventilation; either via conditioned supply air from the HVAC system, or a continuous exhaust ventilation strategy. As the CARB's building partner, Ithaca Neighborhood Housing Services, intended to use the unvented crawlspace in a recent development, CARB was interested in investigating a hybrid ventilation method that includes the exhaust air from the crawlspace as a portion of an ASHRAE 62.2 compliant whole-house ventilation strategy. This hybrid ventilation method was evaluated through a series of long-term monitoring tests thatmore » observed temperature, humidity, and pressure conditions through the home and crawlspace. Additionally, CARB worked with NREL to perform multi-point tracer gas testing on six separate ventilation strategies - varying portions of 62.2 required flow supplied by the crawlspace fan and an upstairs bathroom fan. The intent of the tracer gas testing was to identify effective Reciprocal Age of Air (RAoA), which is equivalent to the air change rate in well-mixed zones, for each strategy while characterizing localized infiltration rates in several areas of the home.« less

  9. Wheelchair accessibility to public buildings in Istanbul.

    PubMed

    Evcil, A Nilay

    2009-03-01

    Accessibility to public environment is the human right and basic need of each citizen and is one of the fundamental considerations for urban planning. The aim of this study is to determine the compliance of public buildings in central business districts (CBD) of Istanbul, Turkey, to wheelchair accessibility to the guidelines of the instrument and identify architectural barriers faced by wheelchair users. This is a descriptive study of 26 public buildings in CBD of Istanbul. The instrument used is the adapted Useh, Moyo and Munyonga questionnaire to collect the data from direct observation and measurement. Descriptive statistics of simple percentages and means are used to explain the compliance to the guidelines of the instrument and wheelchair accessibility. The descriptive survey results indicate that wheelchair users experience many accessibility problems in public environment of the most urbanised city (cultural capital of Europe in 2010) in a developing country. It is found that the major architectural barrier is the public transportation items with the lowest mean compliance (25%). Beside this, the most compliant to the instrument is entrance to building items with 79% as mean percentage. It is also found that there is an intention to improve accessibility when building construction period is investigated. This article describes the example of the compliance of public buildings accessibility when the country has legislation, but lacking regulations about accessibility for the wheelchair users.

  10. Seismic Safety Of Simple Masonry Buildings

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Guadagnuolo, Mariateresa; Faella, Giuseppe

    2008-07-08

    Several masonry buildings comply with the rules for simple buildings provided by seismic codes. For these buildings explicit safety verifications are not compulsory if specific code rules are fulfilled. In fact it is assumed that their fulfilment ensures a suitable seismic behaviour of buildings and thus adequate safety under earthquakes. Italian and European seismic codes differ in the requirements for simple masonry buildings, mostly concerning the building typology, the building geometry and the acceleration at site. Obviously, a wide percentage of buildings assumed simple by codes should satisfy the numerical safety verification, so that no confusion and uncertainty have tomore » be given rise to designers who must use the codes. This paper aims at evaluating the seismic response of some simple unreinforced masonry buildings that comply with the provisions of the new Italian seismic code. Two-story buildings, having different geometry, are analysed and results from nonlinear static analyses performed by varying the acceleration at site are presented and discussed. Indications on the congruence between code rules and results of numerical analyses performed according to the code itself are supplied and, in this context, the obtained result can provide a contribution for improving the seismic code requirements.« less

  11. 76 FR 38455 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-30

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [Docket Numbers FRA-2003-14565 and FRA-2006-24216] Petition for Waiver of Compliance In accordance with part 211 of Title 49 of the Code... Administration (FRA) for a waiver of compliance from certain provisions of the Federal railroad safety...

  12. 24 CFR 200.925c - Model codes.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... below. (1) Model Building Codes—(i) The BOCA National Building Code, 1993 Edition, The BOCA National..., Administration, for the Building, Plumbing and Mechanical Codes and the references to fire retardant treated wood... number 2 (Chapter 7) of the Building Code, but including the Appendices of the Code. Available from...

  13. 24 CFR 200.925c - Model codes.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... below. (1) Model Building Codes—(i) The BOCA National Building Code, 1993 Edition, The BOCA National..., Administration, for the Building, Plumbing and Mechanical Codes and the references to fire retardant treated wood... number 2 (Chapter 7) of the Building Code, but including the Appendices of the Code. Available from...

  14. 24 CFR 200.925c - Model codes.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... below. (1) Model Building Codes—(i) The BOCA National Building Code, 1993 Edition, The BOCA National..., Administration, for the Building, Plumbing and Mechanical Codes and the references to fire retardant treated wood... number 2 (Chapter 7) of the Building Code, but including the Appendices of the Code. Available from...

  15. 42 CFR 52b.12 - What are the minimum requirements of construction and equipment?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...-8400). (3) ICBO “Uniform Building Code,” Volumes 1-3 (1997). International Conference of Building...-4406). (4) BOCA National Building Code (1996) 1998 Supplement, Building Officials and Code... Southern Building Code Congress (SBCC), 900 Montclair Road, Birmingham, AL 35213-1206 (telephone 205-591...

  16. 42 CFR 52b.12 - What are the minimum requirements of construction and equipment?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...-8400). (3) ICBO “Uniform Building Code,” Volumes 1-3 (1997). International Conference of Building...-4406). (4) BOCA National Building Code (1996) 1998 Supplement, Building Officials and Code... Southern Building Code Congress (SBCC), 900 Montclair Road, Birmingham, AL 35213-1206 (telephone 205-591...

  17. 42 CFR 52b.12 - What are the minimum requirements of construction and equipment?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...-8400). (3) ICBO “Uniform Building Code,” Volumes 1-3 (1997). International Conference of Building...-4406). (4) BOCA National Building Code (1996) 1998 Supplement, Building Officials and Code... Southern Building Code Congress (SBCC), 900 Montclair Road, Birmingham, AL 35213-1206 (telephone 205-591...

  18. Building Energy Codes: Policy Overview and Good Practices

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cox, Sadie

    2016-02-19

    Globally, 32% of total final energy consumption is attributed to the building sector. To reduce energy consumption, energy codes set minimum energy efficiency standards for the building sector. With effective implementation, building energy codes can support energy cost savings and complementary benefits associated with electricity reliability, air quality improvement, greenhouse gas emission reduction, increased comfort, and economic and social development. This policy brief seeks to support building code policymakers and implementers in designing effective building code programs.

  19. SU-F-P-10: A Web-Based Radiation Safety Relational Database Module for Regulatory Compliance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosen, C; Ramsay, B; Konerth, S

    Purpose: Maintaining compliance with Radioactive Materials Licenses is inherently a time-consuming task requiring focus and attention to detail. Staff tasked with these responsibilities, such as the Radiation Safety Officer and associated personnel must retain disparate records for eventual placement into one or more annual reports. Entering results and records in a relational database using a web browser as the interface, and storing that data in a cloud-based storage site, removes procedural barriers. The data becomes more adaptable for mining and sharing. Methods: Web-based code was written utilizing the web framework Django, written in Python. Additionally, the application utilizes JavaScript formore » front-end interaction, SQL, HTML and CSS. Quality assurance code testing is performed in a sequential style, and new code is only added after the successful testing of the previous goals. Separate sections of the module include data entry and analysis for audits, surveys, quality management, and continuous quality improvement. Data elements can be adapted for quarterly and annual reporting, and for immediate notification of user determined alarm settings. Results: Current advances are focusing on user interface issues, and determining the simplest manner by which to teach the user to build query forms. One solution has been to prepare library documents that a user can select or edit in place of creation a new document. Forms are being developed based upon Nuclear Regulatory Commission federal code, and will be expanded to include State Regulations. Conclusion: Establishing a secure website to act as the portal for data entry, storage and manipulation can lead to added efficiencies for a Radiation Safety Program. Access to multiple databases can lead to mining for big data programs, and for determining safety issues before they occur. Overcoming web programming challenges, a category that includes mathematical handling, is providing challenges that are being overcome.« less

  20. The problem of privacy in transcultural research: reflections on an ethnographic study in Sri Lanka.

    PubMed

    Monshi, Bardia; Zieglmayer, Verena

    2004-01-01

    Western laws and codes of ethics frequently require that private health information be treated confidentially. However, cross-cultural research shows that it is not always easy to determine what members of a culture consider to be private or how they wish private information to be handled. This article begins by presenting an ethnographic study of patient-healer relationships in Sri Lanka; researchers were surprised to find that participants' views of health and privacy differed greatly from typical Western views, and that the privacy protections they had put in place caused discomfort among participants. Building on this ethics case study, the article explores two main questions. First, can a single definition of privacy possibly do justice to the cultural variations that exist, or does a conceptual definition inevitably run the risk of ethnocentrism? Second, to what extent is strict compliance with research regulations or ethics codes ethically justifiable when following the rules will obviously cause unease in international participants?

  1. Kayenta Township Building & Safety Department, Tribal Green Building Code Summit Presentation

    EPA Pesticide Factsheets

    Tribal Green Building Code Summit Presentation by Kayenta Township Building & Safety Department showing how they established the building department, developed a code adoption and enforcement process, and hired staff to carry out the work.

  2. 7 CFR Exhibit E to Subpart A of... - Voluntary National Model Building Codes

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 12 2013-01-01 2013-01-01 false Voluntary National Model Building Codes E Exhibit E... National Model Building Codes The following documents address the health and safety aspects of buildings and related structures and are voluntary national model building codes as defined in § 1924.4(h)(2) of...

  3. 7 CFR Exhibit E to Subpart A of... - Voluntary National Model Building Codes

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 12 2014-01-01 2013-01-01 true Voluntary National Model Building Codes E Exhibit E to... Model Building Codes The following documents address the health and safety aspects of buildings and related structures and are voluntary national model building codes as defined in § 1924.4(h)(2) of this...

  4. 7 CFR Exhibit E to Subpart A of... - Voluntary National Model Building Codes

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 12 2012-01-01 2012-01-01 false Voluntary National Model Building Codes E Exhibit E... National Model Building Codes The following documents address the health and safety aspects of buildings and related structures and are voluntary national model building codes as defined in § 1924.4(h)(2) of...

  5. Study of potential nonconformities of a new recreation center building's envelope

    NASA Astrophysics Data System (ADS)

    Stanescu, M.; Kajl, S.; Lamarche, L.

    2016-09-01

    This article presents a building envelope's analysis in order to verify the compliance with mandatory provisions of the Model National Energy Code for Buildings in Canada (MNECB 1997). Because some of the requirements are «not met», investigations were carried out to provide justifications in order to prove that the building can be considered as an exception to the mandatory provisions of MNECB. Therefore, we evaluate the impact of three (3) potential nonconformities of the building's walls on the building energy performance. In regards to article 3.1.1.1.4 of MNECB, there is an exception if it can be proved that permanent process (like heat recovery of refrigeration compressors) can produce at all times enough heat that no other heating source is required. First of all, by using simulation, we were able to indicate that almost all building's heating will be provided by energy recovery from ice rinks refrigeration systems (99.2%). Secondly, by using an energy analysis carried out with HEAT2 software, we can show that the increase of heating energy demand caused by the 3 studied walls is very low. This represents an increase of the heating energy demand of only 0.2%, and this, regardless of the heat recovery process. Because the nonconforming wall sections are small (0.97% of the envelope area), this mainly explains the minor impact in terms of building performance. In conclusion, according to the results obtained, we were able to recommend the building for consideration as an exception to the mandatory provisions of MNECB.

  6. Energy Savings Analysis of the Proposed NYStretch-Energy Code 2018

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Liu, Bing; Zhang, Jian; Chen, Yan

    This study was conducted by the Pacific Northwest National Laboratory (PNNL) in support of the stretch energy code development led by the New York State Energy Research and Development Authority (NYSERDA). In 2017 NYSERDA developed its 2016 Stretch Code Supplement to the 2016 New York State Energy Conservation Construction Code (hereinafter referred to as “NYStretch-Energy”). NYStretch-Energy is intended as a model energy code for statewide voluntary adoption that anticipates other code advancements culminating in the goal of a statewide Net Zero Energy Code by 2028. Since then, NYSERDA continues to develop the NYStretch-Energy Code 2018 edition. To support the effort,more » PNNL conducted energy simulation analysis to quantify the energy savings of proposed commercial provisions of the NYStretch-Energy Code (2018) in New York. The focus of this project is the 20% improvement over existing commercial model energy codes. A key requirement of the proposed stretch code is that it be ‘adoptable’ as an energy code, meaning that it must align with current code scope and limitations, and primarily impact building components that are currently regulated by local building departments. It is largely limited to prescriptive measures, which are what most building departments and design projects are most familiar with. This report describes a set of energy-efficiency measures (EEMs) that demonstrate 20% energy savings over ANSI/ASHRAE/IES Standard 90.1-2013 (ASHRAE 2013) across a broad range of commercial building types and all three climate zones in New York. In collaboration with New Building Institute, the EEMs were developed from national model codes and standards, high-performance building codes and standards, regional energy codes, and measures being proposed as part of the on-going code development process. PNNL analyzed these measures using whole building energy models for selected prototype commercial buildings and multifamily buildings representing buildings in New York. Section 2 of this report describes the analysis methodology, including the building types and construction area weights update for this analysis, the baseline, and the method to conduct the energy saving analysis. Section 3 provides detailed specifications of the EEMs and bundles. Section 4 summarizes the results of individual EEMs and EEM bundles by building type, energy end-use and climate zone. Appendix A documents detailed descriptions of the selected prototype buildings. Appendix B provides energy end-use breakdown results by building type for both the baseline code and stretch code in all climate zones.« less

  7. Scanning for safety: an integrated approach to improved bar-code medication administration.

    PubMed

    Early, Cynde; Riha, Chris; Martin, Jennifer; Lowdon, Karen W; Harvey, Ellen M

    2011-03-01

    This is a review of lessons learned in the postimplementation evaluation of a bar-code medication administration technology implemented at a major tertiary-care hospital in 2001. In 2006, with a bar-code medication administration scan compliance rate of 82%, a near-miss sentinel event prompted review of this technology as part of an institutional recommitment to a "culture of safety." Multifaceted problems with bar-code medication administration created an environment of circumventing safeguards as demonstrated by an increase in manual overrides to ensure timely medication administration. A multiprofessional team composed of nursing, pharmacy, human resources, quality, and technical services formalized. Each step in the bar-code medication administration process was reviewed. Technology, process, and educational solutions were identified and implemented systematically. Overall compliance with bar-code medication administration rose from 82% to 97%, which resulted in a calculated cost avoidance of more than $2.8 million during this time frame of the project.

  8. Space Telecommunications Radio System (STRS) Compliance Testing

    NASA Technical Reports Server (NTRS)

    Handler, Louis M.

    2011-01-01

    The Space Telecommunications Radio System (STRS) defines an open architecture for software defined radios. This document describes the testing methodology to aid in determining the degree of compliance to the STRS architecture. Non-compliances are reported to the software and hardware developers as well as the NASA project manager so that any non-compliances may be fixed or waivers issued. Since the software developers may be divided into those that provide the operating environment including the operating system and STRS infrastructure (OE) and those that supply the waveform applications, the tests are divided accordingly. The static tests are also divided by the availability of an automated tool that determines whether the source code and configuration files contain the appropriate items. Thus, there are six separate step-by-step test procedures described as well as the corresponding requirements that they test. The six types of STRS compliance tests are: STRS application automated testing, STRS infrastructure automated testing, STRS infrastructure testing by compiling WFCCN with the infrastructure, STRS configuration file testing, STRS application manual code testing, and STRS infrastructure manual code testing. Examples of the input and output of the scripts are shown in the appendices as well as more specific information about what to configure and test in WFCCN for non-compliance. In addition, each STRS requirement is listed and the type of testing briefly described. Attached is also a set of guidelines on what to look for in addition to the requirements to aid in the document review process.

  9. Measuring compliance with the Baby-Friendly Hospital Initiative.

    PubMed

    Haiek, Laura N

    2012-05-01

    The WHO/UNICEF Baby-Friendly Hospital Initiative (BFHI) is an effective strategy to increase breast-feeding exclusivity and duration but many countries have been slow to implement it. The present paper describes the development of a computer-based instrument that measures policies and practices outlined in the BFHI. The tool uses clinical staff/managers' and pregnant women/mothers' opinions as well as maternity unit observations to assess compliance with the BFHI's Ten Steps to Successful Breastfeeding (Ten Steps) and the International Code of Marketing of Breastmilk Substitutes (Code) by measuring the extent of implementation of two to fourteen indicators for each step and the Code. Composite scores are used to summarize results. Examples of results from a 2007 assessment performed in nine hospitals in the province of Québec are presented to illustrate the type of information returned to individual hospitals and health authorities. Participants included nine to fifteen staff/managers per hospital randomly selected among those present during the interviewer-observer's 12 h hospital visit and nine to forty-five breast-feeding mothers per hospital telephoned at home after being randomly selected from birth certificates. The Ten Steps Global Compliance Score for the nine hospitals varied between 2.87 and 6.51 (range 0-10, mean 5.06) whereas the Code Global Compliance Score varied between 0.58 and 1 (range 0-1, mean 0.83). Instrument development, examples of assessment results and potential applications are discussed. A methodology to measure BFHI compliance may help support the implementation of this effective intervention and contribute to improved maternal and child health.

  10. 38 CFR 39.63 - Architectural design standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 5000, Building Construction and Safety Code, and the 2002 edition of the National Electrical Code, NFPA... 5000, Building Construction and Safety Code. Where the adopted codes state conflicting requirements... the standards set forth in this section, all applicable local and State building codes and regulations...

  11. 38 CFR 39.63 - Architectural design standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 5000, Building Construction and Safety Code, and the 2002 edition of the National Electrical Code, NFPA... 5000, Building Construction and Safety Code. Where the adopted codes state conflicting requirements... the standards set forth in this section, all applicable local and State building codes and regulations...

  12. 38 CFR 39.63 - Architectural design standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 5000, Building Construction and Safety Code, and the 2002 edition of the National Electrical Code, NFPA... 5000, Building Construction and Safety Code. Where the adopted codes state conflicting requirements... the standards set forth in this section, all applicable local and State building codes and regulations...

  13. 24 CFR 578.75 - General operations.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... assistance under this part must meet State or local building codes, and in the absence of State or local building codes, the International Residential Code or International Building Code (as applicable to the type of structure) of the International Code Council. (2) Services provided with assistance under this...

  14. 24 CFR 578.75 - General operations.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... assistance under this part must meet State or local building codes, and in the absence of State or local building codes, the International Residential Code or International Building Code (as applicable to the type of structure) of the International Code Council. (2) Services provided with assistance under this...

  15. 76 FR 23490 - Aluminum tris (O

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-27

    ... code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This... used to avoid contamination of food, feed, or food-contact/feed-contact surfaces. Compliance with the... are an agricultural producer, food manufacturer, or pesticide manufacturer. Potentially affected...

  16. Rethinking ADA signage standards for low-vision accessibility.

    PubMed

    Arditi, Aries

    2017-05-01

    Americans With Disabilities Act (ADA) and International Code Council (ICC) standards for accessible buildings and facilities affect design and construction of all new and renovated buildings throughout the United States, and form the basis for compliance with the ADA. While these standards may result in acceptable accessibility for people who are fully blind, they fall far short of what they could and should accomplish for those with low vision. In this article I critique the standards, detailing their lack of evidence base and other shortcomings. I suggest that simply making existing requirements stricter (e.g., by mandating larger letter size or higher contrasts) will not ensure visual accessibility and therefore cannot act as a valid basis for compliance with the law. I propose two remedies. First, requirements for visual characteristics of signs intended to improve access for those with low vision should be expressed not in terms of physical features, such as character height and contrast, but rather in terms of the distance at which a sign can be read by someone with nominally normal (20/20) visual acuity under expected lighting conditions for the installed environment. This would give sign designers greater choice in design parameters but place on them the burden of ensuring legibility. Second, mounting of directional signs, which are critical for effective and efficient wayfinding, should be required to be in consistent and approachable locations so that those with reduced acuity may view them at close distance.

  17. Rethinking ADA signage standards for low-vision accessibility

    PubMed Central

    Arditi, Aries

    2017-01-01

    Americans With Disabilities Act (ADA) and International Code Council (ICC) standards for accessible buildings and facilities affect design and construction of all new and renovated buildings throughout the United States, and form the basis for compliance with the ADA. While these standards may result in acceptable accessibility for people who are fully blind, they fall far short of what they could and should accomplish for those with low vision. In this article I critique the standards, detailing their lack of evidence base and other shortcomings. I suggest that simply making existing requirements stricter (e.g., by mandating larger letter size or higher contrasts) will not ensure visual accessibility and therefore cannot act as a valid basis for compliance with the law. I propose two remedies. First, requirements for visual characteristics of signs intended to improve access for those with low vision should be expressed not in terms of physical features, such as character height and contrast, but rather in terms of the distance at which a sign can be read by someone with nominally normal (20/20) visual acuity under expected lighting conditions for the installed environment. This would give sign designers greater choice in design parameters but place on them the burden of ensuring legibility. Second, mounting of directional signs, which are critical for effective and efficient wayfinding, should be required to be in consistent and approachable locations so that those with reduced acuity may view them at close distance. PMID:28510625

  18. 40 CFR 51.362 - Motorist compliance enforcement program oversight.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... collection through the use of automatic data capture systems such as bar-code scanners or optical character... determination of compliance through parking lot surveys, road-side pull-overs, or other in-use vehicle...

  19. 40 CFR 51.362 - Motorist compliance enforcement program oversight.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... collection through the use of automatic data capture systems such as bar-code scanners or optical character... determination of compliance through parking lot surveys, road-side pull-overs, or other in-use vehicle...

  20. 75 FR 4579 - Certificate of Alternative Compliance for the Tugboat MR SAM

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-28

    ... Compliance for the Tugboat MR SAM AGENCY: Coast Guard, DHS. ACTION: Notice. SUMMARY: The Coast Guard announces that a Certificate of Alternative Compliance was issued for the tugboat MR SAM as required by 33 U... Title 33, Code of Federal Regulations, Parts 81 and 89, has been issued for the tugboat MR SAM, O.N...

  1. Brief Report: Compliance and Noncompliance to Parental Control Strategies in Children with High-Functioning Autism and Their Typical Peers

    ERIC Educational Resources Information Center

    Bryce, Crystal I.; Jahromi, Laudan B.

    2013-01-01

    The present study examined children's compliance and noncompliance behaviors in response to parental control strategies in 20 children with high-functioning autism (HFA) and 20 matched typically-developing children. Observational coding was used to measure child compliance (committed, situational), noncompliance (passive, defiance, self-assertion,…

  2. National Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Thornton, Brian; Halverson, Mark A.; Myer, Michael

    Pacific Northwest National Laboratory (PNNL) completed this project for the U.S. Department of Energy’s (DOE’s) Building Energy Codes Program (BECP). DOE’s BECP supports upgrading building energy codes and standards, and the states’ adoption, implementation, and enforcement of upgraded codes and standards. Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, and impact energy use and greenhouse gas emissions for the life of buildings. Continuous improvement of building energy efficiency is achieved by periodically upgrading energy codes and standards. Ensuring that changes in the code that may alter costs (for building components,more » initial purchase and installation, replacement, maintenance and energy) are cost-effective encourages their acceptance and implementation. ANSI/ASHRAE/IESNA Standard 90.1 is the energy standard for commercial and multi-family residential buildings over three floors.« less

  3. Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Thornton, Brian A.; Halverson, Mark A.; Myer, Michael

    Pacific Northwest National Laboratory (PNNL) completed this project for the U.S. Department of Energy’s (DOE’s) Building Energy Codes Program (BECP). DOE’s BECP supports upgrading building energy codes and standards, and the states’ adoption, implementation, and enforcement of upgraded codes and standards. Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, and impact energy use and greenhouse gas emissions for the life of buildings. Continuous improvement of building energy efficiency is achieved by periodically upgrading energy codes and standards. Ensuring that changes in the code that may alter costs (for building components,more » initial purchase and installation, replacement, maintenance and energy) are cost-effective encourages their acceptance and implementation. ANSI/ASHRAE/IESNA Standard 90.1 is the energy standard for commercial and multi-family residential buildings over three floors.« less

  4. Bar code-based pre-transfusion check in pre-operative autologous blood donation.

    PubMed

    Ohsaka, Akimichi; Furuta, Yoshiaki; Ohsawa, Toshiya; Kobayashi, Mitsue; Abe, Katsumi; Inada, Eiichi

    2010-10-01

    The objective of this study was to demonstrate the feasibility of a bar code-based identification system for the pre-transfusion check at the bedside in the setting of pre-operative autologous blood donation (PABD). Between July 2003 and December 2008 we determined the compliance rate and causes of failure of electronic bedside checking for PABD transfusion. A total of 5627 (9% of all transfusions) PABD units were administered without a single mistransfusion. The overall rate of compliance with electronic checking was 99%. The bar code-based identification system was applicable to the pre-transfusion check for PABD transfusion. Copyright © 2010 Elsevier Ltd. All rights reserved.

  5. Defending public interests in private lands: compliance, costs and potential environmental consequences of the Brazilian Forest Code in Mato Grosso.

    PubMed

    Stickler, Claudia M; Nepstad, Daniel C; Azevedo, Andrea A; McGrath, David G

    2013-06-05

    Land-use regulations are a critical component of forest governance and conservation strategies, but their effectiveness in shaping landholder behaviour is poorly understood. We conducted a spatial and temporal analysis of the Brazilian Forest Code (BFC) to understand the patterns of regulatory compliance over time and across changes in the policy, and the implications of these compliance patterns for the perceived costs to landholders and environmental performance of agricultural landscapes in the southern Amazon state of Mato Grosso. Landholdings tended to remain in compliance or not according to their status at the beginning of the study period. The perceived economic burden of BFC compliance on soya bean and beef producers (US$3-5.6 billion in net present value of the land) may in part explain the massive, successful campaign launched by the farm lobby to change the BFC. The ecological benefits of compliance (e.g. greater connectivity and carbon) with the BFC are diffuse and do not compete effectively with the economic benefits of non-compliance that are perceived by landholders. Volatile regulation of land-use decisions that affect billions in economic rent that could be captured is an inadequate forest governance instrument; effectiveness of such regulations may increase when implemented in tandem with positive incentives for forest conservation.

  6. 41 CFR 102-80.85 - Are Federally owned and leased buildings exempt from State and local code requirements in fire...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... leased buildings exempt from State and local code requirements in fire protection? 102-80.85 Section 102... Fire Prevention State and Local Codes § 102-80.85 Are Federally owned and leased buildings exempt from State and local code requirements in fire protection? Federally owned buildings are generally exempt...

  7. 41 CFR 102-80.85 - Are Federally owned and leased buildings exempt from State and local code requirements in fire...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... leased buildings exempt from State and local code requirements in fire protection? 102-80.85 Section 102... Fire Prevention State and Local Codes § 102-80.85 Are Federally owned and leased buildings exempt from State and local code requirements in fire protection? Federally owned buildings are generally exempt...

  8. 41 CFR 102-80.85 - Are Federally owned and leased buildings exempt from State and local code requirements in fire...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... leased buildings exempt from State and local code requirements in fire protection? 102-80.85 Section 102... Fire Prevention State and Local Codes § 102-80.85 Are Federally owned and leased buildings exempt from State and local code requirements in fire protection? Federally owned buildings are generally exempt...

  9. 41 CFR 102-80.85 - Are Federally owned and leased buildings exempt from State and local code requirements in fire...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... leased buildings exempt from State and local code requirements in fire protection? 102-80.85 Section 102... Fire Prevention State and Local Codes § 102-80.85 Are Federally owned and leased buildings exempt from State and local code requirements in fire protection? Federally owned buildings are generally exempt...

  10. 41 CFR 102-80.85 - Are Federally owned and leased buildings exempt from State and local code requirements in fire...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... leased buildings exempt from State and local code requirements in fire protection? 102-80.85 Section 102... Fire Prevention State and Local Codes § 102-80.85 Are Federally owned and leased buildings exempt from State and local code requirements in fire protection? Federally owned buildings are generally exempt...

  11. 31 CFR 91.5 - Compliance with signs and directions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Compliance with signs and directions. 91.5 Section 91.5 Money and Finance: Treasury Regulations Relating to Money and Finance REGULATIONS GOVERNING CONDUCT IN OR ON THE BUREAU OF THE MINT BUILDINGS AND GROUNDS § 91.5 Compliance with signs and...

  12. Implementation of Energy Code Controls Requirements in New Commercial Buildings

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosenberg, Michael I.; Hart, Philip R.; Hatten, Mike

    Most state energy codes in the United States are based on one of two national model codes; ANSI/ASHRAE/IES 90.1 (Standard 90.1) or the International Code Council (ICC) International Energy Conservation Code (IECC). Since 2004, covering the last four cycles of Standard 90.1 updates, about 30% of all new requirements have been related to building controls. These requirements can be difficult to implement and verification is beyond the expertise of most building code officials, yet the assumption in studies that measure the savings from energy codes is that they are implemented and working correctly. The objective of the current research ismore » to evaluate the degree to which high impact controls requirements included in commercial energy codes are properly designed, commissioned and implemented in new buildings. This study also evaluates the degree to which these control requirements are realizing their savings potential. This was done using a three-step process. The first step involved interviewing commissioning agents to get a better understanding of their activities as they relate to energy code required controls measures. The second involved field audits of a sample of commercial buildings to determine whether the code required control measures are being designed, commissioned and correctly implemented and functioning in new buildings. The third step includes compilation and analysis of the information gather during the first two steps. Information gathered during these activities could be valuable to code developers, energy planners, designers, building owners, and building officials.« less

  13. Building a Better Campus: An Update on Building Codes.

    ERIC Educational Resources Information Center

    Madden, Michael J.

    2002-01-01

    Discusses the implications for higher education institutions in terms of facility planning, design, construction, and renovation of the move from regionally-developed model-building codes to two international sets of codes. Also addresses the new performance-based design option within the codes. (EV)

  14. 38 CFR 61.15 - Obtaining additional information and awarding capital grants.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... establishing compliance with local and state zoning codes; (7) Documentation in the form of one set of design... ensure compliance with the provisions of the National Environmental Policy Act (42 U.S.C. 4321 et seq...

  15. 38 CFR 61.15 - Obtaining additional information and awarding capital grants.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... establishing compliance with local and state zoning codes; (7) Documentation in the form of one set of design... ensure compliance with the provisions of the National Environmental Policy Act (42 U.S.C. 4321 et seq...

  16. Municipal Solid Waste Landfills: New Source Performance Standards (NSPS), Emission Guidelines (EG) and Compliance Times

    EPA Pesticide Factsheets

    learn about the NSPS for municipal solid waste landfills by reading the rule summary, rule history, code of federal regulations text, fact sheets, background information documents, related rules and compliance information.

  17. A MODEL BUILDING CODE ARTICLE ON FALLOUT SHELTERS WITH RECOMMENDATIONS FOR INCLUSION OF REQUIREMENTS FOR FALLOUT SHELTER CONSTRUCTION IN FOUR NATIONAL MODEL BUILDING CODES.

    ERIC Educational Resources Information Center

    American Inst. of Architects, Washington, DC.

    A MODEL BUILDING CODE FOR FALLOUT SHELTERS WAS DRAWN UP FOR INCLUSION IN FOUR NATIONAL MODEL BUILDING CODES. DISCUSSION IS GIVEN OF FALLOUT SHELTERS WITH RESPECT TO--(1) NUCLEAR RADIATION, (2) NATIONAL POLICIES, AND (3) COMMUNITY PLANNING. FALLOUT SHELTER REQUIREMENTS FOR SHIELDING, SPACE, VENTILATION, CONSTRUCTION, AND SERVICES SUCH AS ELECTRICAL…

  18. How families cope with diabetes in adolescence. An approach and case analyses.

    PubMed

    Hauser, S T; Paul, E L; Jacobson, A M; Weiss-Perry, B; Vieyra, M A; Rufo, P; Spetter, L D; DiPlacido, J; Wertlieb, D; Wolfsdorf, J

    1988-01-01

    In this paper we describe our newly constructed Family Coping Coding System. This scheme was constructed to identify family coping strategies that involve appraisal, problem solving, and emotion management dimensions. We discuss the theoretical rationale, meanings and reliability of the coping codes, and illustrate them through excerpts drawn from family discussions of a recent stressful situation (the onset of a chronic or acute illness in an adolescent member). Finally, we consider the clinical research relevance of this new assessment technique, exemplifying this potential with respect to medical compliance. We present analyses of two families with diabetic adolescents who strikingly differ with respect to compliance, and explore which family coping strategies may be predictive of an adolescent's favorable or problematic compliance to diabetes management.

  19. Certifying Domain-Specific Policies

    NASA Technical Reports Server (NTRS)

    Lowry, Michael; Pressburger, Thomas; Rosu, Grigore; Koga, Dennis (Technical Monitor)

    2001-01-01

    Proof-checking code for compliance to safety policies potentially enables a product-oriented approach to certain aspects of software certification. To date, previous research has focused on generic, low-level programming-language properties such as memory type safety. In this paper we consider proof-checking higher-level domain -specific properties for compliance to safety policies. The paper first describes a framework related to abstract interpretation in which compliance to a class of certification policies can be efficiently calculated Membership equational logic is shown to provide a rich logic for carrying out such calculations, including partiality, for certification. The architecture for a domain-specific certifier is described, followed by an implemented case study. The case study considers consistency of abstract variable attributes in code that performs geometric calculations in Aerospace systems.

  20. 48 CFR 3.1002 - Policy.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... PRACTICES AND PERSONAL CONFLICTS OF INTEREST Contractor Code of Business Ethics and Conduct 3.1002 Policy.... (b) Contractors should have a written code of business ethics and conduct. To promote compliance with such code of business ethics and conduct, contractors should have an employee business ethics and...

  1. 76 FR 34937 - Amitraz, Bentazon, Bifenthrin, Chlorfenapyr, Cyfluthrin, Deltamethrin, et al

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-15

    ... production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532... food/feed handling establishments (including food service, manufacturing and processing establishments... ingredient; and contamination of food/ feed or food/feed contact surfaces shall be avoided. Compliance with...

  2. 7 CFR Exhibit E to Subpart A of... - Voluntary National Model Building Codes

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... National Model Building Codes The following documents address the health and safety aspects of buildings... International, Inc., 4051 West Flossmoor Road, Country Club Hills, Illinois 60477. 2 Southern Building Code Congress International, Inc., 900 Montclair Road, Birmingham, Alabama 35213-1206. 3 International...

  3. Health and Safety in Family Day Care Homes: Association Between Regulatory Non-compliance and Lower Median Income.

    PubMed

    Rosenthal, Marjorie S; Jeon, Sangchoon; Crowley, Angela A

    2016-05-01

    To determine frequency of non-compliance with child care regulations among family day care homes (FDCH) and identify the role of income in compliance. We analyzed non-compliance in 746 routine, unannounced inspection and re-inspection reports of FDCH collected by the Connecticut Department of Public Health licensing specialists in 2007-2008 and linked results to median income of zip code data. We grouped the 83 state regulations into 12 regulation categories, analyzed 11 categories, and used latent class analysis to classify each FDCH as high or low compliance for each category. We used logistic regression analysis to estimate the odds ratios of low compliance. Among the 746 FDCH inspections (594 first inspections and 152 re-inspections), we found high rates of non-compliance in inspection regulations in immunizations (32.9 %), water temperature (35.6 %) and hazards (30.0 %). Among the 11 regulation categories, 4 categories (indoor safety, emergency preparedness, child/family/staff documentation, and qualifications of provider) had regulations with high non-compliance. Median household income of FDCH zip code was lower for re-inspection sites than for inspection sites ($34,715 vs. $57,118, p < 0.0001) and FDCH in the lowest quartile of income had greater odds of low compliance in indoor safety (OR 1.86, 95 % CI 1.04, 3.35, p < 0.05). The majority of FDCH were in compliance with the majority of regulations, yet there are glaring non-compliance issues in inspections and re-inspections and there are income-based inequities that place children at higher risk who are already at high risk for suboptimal health outcomes.

  4. 76 FR 5215 - Draft Regulatory Guide: Issuance, Availability

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-28

    ... Compliance with Packaging Requirements for Shipment and Receipt of Radioactive Material,'' is temporarily... Code of Federal Regulations, Part 71, ``Packaging and Transportation of Radioactive Material'' (10 CFR... Compliance with Packaging Requirements for Shipments of Radioactive Materials,'' as an acceptable process for...

  5. 7 CFR Exhibit E to Subpart A of... - Voluntary National Model Building Codes

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Voluntary National Model Building Codes E Exhibit E... HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE SERVICE, RURAL UTILITIES SERVICE, AND FARM SERVICE AGENCY... National Model Building Codes The following documents address the health and safety aspects of buildings...

  6. 7 CFR 1792.103 - Seismic design and construction standards for new buildings.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Seismic Regulation for New Buildings. (b) Each of the following model codes or standards provides a level...) 548-2723. Fax: (703) 295-6211. (3) 2003 International Code Council (ICC) International Building Code... buildings. 1792.103 Section 1792.103 Agriculture Regulations of the Department of Agriculture (Continued...

  7. 7 CFR 1792.103 - Seismic design and construction standards for new buildings.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Seismic Regulation for New Buildings. (b) Each of the following model codes or standards provides a level...) 548-2723. Fax: (703) 295-6211. (3) 2003 International Code Council (ICC) International Building Code... buildings. 1792.103 Section 1792.103 Agriculture Regulations of the Department of Agriculture (Continued...

  8. 7 CFR 1792.103 - Seismic design and construction standards for new buildings.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Seismic Regulation for New Buildings. (b) Each of the following model codes or standards provides a level...) 548-2723. Fax: (703) 295-6211. (3) 2003 International Code Council (ICC) International Building Code... buildings. 1792.103 Section 1792.103 Agriculture Regulations of the Department of Agriculture (Continued...

  9. 7 CFR 1792.103 - Seismic design and construction standards for new buildings.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Seismic Regulation for New Buildings. (b) Each of the following model codes or standards provides a level...) 548-2723. Fax: (703) 295-6211. (3) 2003 International Code Council (ICC) International Building Code... buildings. 1792.103 Section 1792.103 Agriculture Regulations of the Department of Agriculture (Continued...

  10. Medicare program; inpatient rehabilitation facility prospective payment system for federal fiscal year 2015.

    PubMed

    2014-08-06

    This final rule updates the prospective payment rates for inpatient rehabilitation facilities (IRFs) for federal fiscal year (FY) 2015 as required by the statute. This final rule finalizes a policy to collect data on the amount and mode (that is, Individual, Concurrent, Group, and Co-Treatment) of therapy provided in the IRF setting according to therapy discipline, revises the list of diagnosis and impairment group codes that presumptively meet the "60 percent rule'' compliance criteria, provides a way for IRFs to indicate on the Inpatient Rehabilitation Facility-Patient Assessment Instrument (IRF-PAI) form whether the prior treatment and severity requirements have been met for arthritis cases to presumptively meet the "60 percent rule'' compliance criteria, and revises and updates quality measures and reporting requirements under the IRF quality reporting program (QRP). This rule also delays the effective date for the revisions to the list of diagnosis codes that are used to determine presumptive compliance under the "60 percent rule'' that were finalized in FY 2014 IRF PPS final rule and adopts the revisions to the list of diagnosis codes that are used to determine presumptive compliance under the "60 percent rule'' that are finalized in this rule. This final rule also addresses the implementation of the International Classification of Diseases, 10th Revision, Clinical Modification (ICD-10-CM), for the IRF prospective payment system (PPS), which will be effective when ICD-10-CM becomes the required medical data code set for use on Medicare claims and IRF-PAI submissions.

  11. Formerly Used Sites Remedial Action Program (FUSRAP) W. R. Grace Building 23 Remedial Action-Challenges and Successes - 12247

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Barber, Brenda; Honerlah, Hans; O'Neill, Mike

    2012-07-01

    Monazite sand processing was conducted at the W. R. Grace Curtis Bay Facility (Baltimore, Maryland) from mid-May 1956 through the spring of 1957 under license to the Atomic Energy Commission (AEC), for the extraction of source material in the form of thorium, as well as rare earth elements. The processing was conducted in the southwest quadrant of a ca. 100 year old, five-story, building (Building 23) in the active manufacturing portion of the facility. Building components and equipment in the southwest quadrant of Building 23 exhibited residual radiological activity remaining from the monazite sand processing. U.S. Army Corps of Engineersmore » (USACE) conducted a remedial investigation (RI) and feasibility study (FS) and prepared a Record of Decision (ROD) to address residual radioactivity on building components and equipment in the southwest quadrant of Building 23. The remedy selected for the southwest quadrant of Building 23, which was documented in the ROD (dated May 2005), was identified as 'Alternative 2: Decontamination With Removal to Industrial Use Levels'. The selected remedy provided for either decontaminating or removing areas of radioactivity to meet the RGs. Demonstration of compliance with the selected ARAR was performed using the Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM) and other appropriate guidance, as well as appropriate dose modeling codes where necessary. USACE-Baltimore District along with its private industry partner worked together under the terms of a 2008 Settlement Agreement to implement the remedial action (RA) for the southwest quadrant of Building 23. The RA was conducted in two phases: Phase 1 was completed to improve the building condition for support of subsequent remedial action and decrease scope uncertainty of the remedial action, and Phase 2 included decontamination and removal activities to meet the RGs and demonstration of compliance with the selected ARAR. Challenges encountered during the RA include: coordination with stakeholders, coordination between multiple RA contractors, addressing unique structural challenges for Building 23, nonradiological hazards associated with the RA, weather issues, and complex final status survey (FSS) coordination. The challenges during the Phase 1 RA were handled successfully. The challenges for the Phase 2 RA, which is anticipated to be complete by late-summer of 2012, have been handled successfully so far. By fall of 2012, USACE is expecting to finalize a robust RA Closure Report, including the Final Status Survey Report, which summarizes the RA activities and documents compliance with the ROD. During the ongoing RA at Building 23, there have been and still are many challenges both technically and from a project management perspective, due in part to the nature and extent of impact at the site (residual radioactivity within an active processing building), dual oversight by the property owner and USACE, and site-specific challenges associated with a complex RA and multiple contractors. Currently, USACE and its industry partner are overseeing the completion of RA field activities. RA closure documentation for the remediation of Building 23 to address residual contamination in building materials will be reviewed/approved by USACE and its industry partner upon completion of the field activities. USACE and its industry partner are working well together, through the Settlement Agreement, to conduct a cost-efficient and effective remedial action to address the legacy issues at Building 23. This cooperative effort has set a firm foundation for achieving a successful RA at the RWDA using a 'forward think' approach, and it is a case study for other sites where an industry partner is involved. The collaborative effort led to implementation of an RA which is acceptable to the site owner, the regulators, and the public, thus allowing USACE to move this project forward successfully in the FUSRAP program. (authors)« less

  12. Computer-assisted coding and clinical documentation: first things first.

    PubMed

    Tully, Melinda; Carmichael, Angela

    2012-10-01

    Computer-assisted coding tools have the potential to drive improvements in seven areas: Transparency of coding. Productivity (generally by 20 to 25 percent for inpatient claims). Accuracy (by improving specificity of documentation). Cost containment (by reducing overtime expenses, audit fees, and denials). Compliance. Efficiency. Consistency.

  13. Compliance with the International Code of Marketing of breast-milk substitutes: an observational study of pediatricians' waiting rooms.

    PubMed

    Dodgson, Joan E; Watkins, Amanda L; Bond, Angela B; Kintaro-Tagaloa, Cheryl; Arellano, Alondra; Allred, Patrick A

    2014-04-01

    Abstract The importance of breastmilk as a primary preventative intervention is widely known and understood by most healthcare providers. The actions or non-actions that heathcare providers take toward promoting and supporting breastfeeding families make a difference in the success and duration of breastfeeding. Recognizing this relationship, the World Health Organization developed the International Code of Marketing of Breast-milk Substitutes (the Code), which defines best practices in breastfeeding promotion, including physicians' offices. The pediatric practices' waiting rooms are often a family's first experience with pediatric care. The specific aims of this study were to describe (1) Code compliance, (2) the demographic factors affecting the Code compliance, and (3) the amount and type of breastfeeding-supportive materials available in the pediatricians' waiting rooms. An observational cross-sectional design was used to collect data from 163 (82%) of the pediatric practices in Maricopa County, Arizona. None of the 100 waiting rooms that had any materials displayed (61%) was found to be completely Code compliant, with 81 of the offices having formula-promotional materials readily available. Waiting rooms in higher income areas offered more non-Code-compliant materials and gifts. Breastfeeding support information and materials were lacking in all but 18 (18%) offices. A positive relationship (t97=-2.31, p=0.02) occurred between the presence of breastfeeding educational materials and higher income areas. We were able to uncover some practice-related patterns that impact families and potentially undermine breastfeeding success. To move current practices toward breastfeeding-friendly physicians' offices, change is needed.

  14. Potential Job Creation in Rhode Island as a Result of Adopting New Residential Building Energy Codes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Scott, Michael J.; Niemeyer, Jackie M.

    Are there advantages to states that adopt the most recent model building energy codes other than saving energy? For example, can the construction activity and energy savings associated with code-compliant housing units become significant sources of job creation for states if new building energy codes are adopted to cover residential construction? , The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) asked Pacific Northwest National Laboratory (PNNL) to research and ascertain whether jobs would be created in individual states based on their adoption of model building energy codes. Each state in the country is dealing with high levelsmore » of unemployment, so job creation has become a top priority. Many programs have been created to combat unemployment with various degrees of failure and success. At the same time, many states still have not yet adopted the most current versions of the International Energy Conservation Code (IECC) model building energy code, when doing so could be a very effective tool in creating jobs to assist states in recovering from this economic downturn.« less

  15. Potential Job Creation in Minnesota as a Result of Adopting New Residential Building Energy Codes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Scott, Michael J.; Niemeyer, Jackie M.

    Are there advantages to states that adopt the most recent model building energy codes other than saving energy? For example, can the construction activity and energy savings associated with code-compliant housing units become significant sources of job creation for states if new building energy codes are adopted to cover residential construction? , The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) asked Pacific Northwest National Laboratory (PNNL) to research and ascertain whether jobs would be created in individual states based on their adoption of model building energy codes. Each state in the country is dealing with high levelsmore » of unemployment, so job creation has become a top priority. Many programs have been created to combat unemployment with various degrees of failure and success. At the same time, many states still have not yet adopted the most current versions of the International Energy Conservation Code (IECC) model building energy code, when doing so could be a very effective tool in creating jobs to assist states in recovering from this economic downturn.« less

  16. Potential Job Creation in Tennessee as a Result of Adopting New Residential Building Energy Codes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Scott, Michael J.; Niemeyer, Jackie M.

    Are there advantages to states that adopt the most recent model building energy codes other than saving energy? For example, can the construction activity and energy savings associated with code-compliant housing units become significant sources of job creation for states if new building energy codes are adopted to cover residential construction? , The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) asked Pacific Northwest National Laboratory (PNNL) to research and ascertain whether jobs would be created in individual states based on their adoption of model building energy codes. Each state in the country is dealing with high levelsmore » of unemployment, so job creation has become a top priority. Many programs have been created to combat unemployment with various degrees of failure and success. At the same time, many states still have not yet adopted the most current versions of the International Energy Conservation Code (IECC) model building energy code, when doing so could be a very effective tool in creating jobs to assist states in recovering from this economic downturn.« less

  17. Potential Job Creation in Nevada as a Result of Adopting New Residential Building Energy Codes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Scott, Michael J.; Niemeyer, Jackie M.

    Are there advantages to states that adopt the most recent model building energy codes other than saving energy? For example, can the construction activity and energy savings associated with code-compliant housing units become significant sources of job creation for states if new building energy codes are adopted to cover residential construction? , The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) asked Pacific Northwest National Laboratory (PNNL) to research and ascertain whether jobs would be created in individual states based on their adoption of model building energy codes. Each state in the country is dealing with high levelsmore » of unemployment, so job creation has become a top priority. Many programs have been created to combat unemployment with various degrees of failure and success. At the same time, many states still have not yet adopted the most current versions of the International Energy Conservation Code (IECC) model building energy code, when doing so could be a very effective tool in creating jobs to assist states in recovering from this economic downturn.« less

  18. SAFETY IN THE DESIGN OF SCIENCE LABORATORIES AND BUILDING CODES.

    ERIC Educational Resources Information Center

    HOROWITZ, HAROLD

    THE DESIGN OF COLLEGE AND UNIVERSITY BUILDINGS USED FOR SCIENTIFIC RESEARCH AND EDUCATION IS DISCUSSED IN TERMS OF LABORATORY SAFETY AND BUILDING CODES AND REGULATIONS. MAJOR TOPIC AREAS ARE--(1) SAFETY RELATED DESIGN FEATURES OF SCIENCE LABORATORIES, (2) LABORATORY SAFETY AND BUILDING CODES, AND (3) EVIDENCE OF UNSAFE DESIGN. EXAMPLES EMPHASIZE…

  19. Do cigarette health warning labels comply with requirements: A 14-country study.

    PubMed

    Cohen, Joanna E; Brown, Jennifer; Washington, Carmen; Welding, Kevin; Ferguson, Jacqueline; Smith, Katherine C

    2016-12-01

    The Framework Convention on Tobacco Control, a global health treaty ratified by over 175 countries, calls on countries to ensure that tobacco packages carry health warning labels (HWLs) describing the harmful effects of tobacco use. We assessed the extent of compliance with 14 countries' HWL requirements. Unique cigarette packs were purchased in 2013 using a systematic protocol in 12 distinct neighborhoods within three of the ten most populous cities in the 14 low- and middle-income countries with the greatest number (count) of smokers. HWL compliance codebooks were developed for each country based on the details of country-specific HWL requirements, with up to four common compliance indicators assessed for each country (location, size, label elements, text size). Packs (n=1859) were double coded for compliance. Compliance was examined by country and pack characteristics, including parent company and brand family. Overall, 72% of coded cigarette packs were compliant with all relevant compliance indicators, ranging from 17% in the Philippines to 94% in Mexico. Compliance was highest for location of the warning (ranging from 75%-100%) and lowest for warning size (ranging from 46%-99%). Compliance was higher for packs bought in high SES neighborhoods, and varied by parent company and brand family. This multi-country study found at least one pack in every country - and many packs in some countries - that were not compliant with key requirements for health warning labels in the country of purchase. Non-compliance may be exacerbating health disparities. Tobacco companies should be held accountable for complying with country HWL requirements. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  20. A Comparative Study on Seismic Analysis of Bangladesh National Building Code (BNBC) with Other Building Codes

    NASA Astrophysics Data System (ADS)

    Bari, Md. S.; Das, T.

    2013-09-01

    Tectonic framework of Bangladesh and adjoining areas indicate that Bangladesh lies well within an active seismic zone. The after effect of earthquake is more severe in an underdeveloped and a densely populated country like ours than any other developed countries. Bangladesh National Building Code (BNBC) was first established in 1993 to provide guidelines for design and construction of new structure subject to earthquake ground motions in order to minimize the risk to life for all structures. A revision of BNBC 1993 is undergoing to make this up to date with other international building codes. This paper aims at the comparison of various provisions of seismic analysis as given in building codes of different countries. This comparison will give an idea regarding where our country stands when it comes to safety against earth quake. Primarily, various seismic parameters in BNBC 2010 (draft) have been studied and compared with that of BNBC 1993. Later, both 1993 and 2010 edition of BNBC codes have been compared graphically with building codes of other countries such as National Building Code of India 2005 (NBC-India 2005), American Society of Civil Engineering 7-05 (ASCE 7-05). The base shear/weight ratios have been plotted against the height of the building. The investigation in this paper reveals that BNBC 1993 has the least base shear among all the codes. Factored Base shear values of BNBC 2010 are found to have increased significantly than that of BNBC 1993 for low rise buildings (≤20 m) around the country than its predecessor. Despite revision of the code, BNBC 2010 (draft) still suggests less base shear values when compared to the Indian and American code. Therefore, this increase in factor of safety against the earthquake imposed by the proposed BNBC 2010 code by suggesting higher values of base shear is appreciable.

  1. Defending public interests in private lands: compliance, costs and potential environmental consequences of the Brazilian Forest Code in Mato Grosso

    PubMed Central

    Stickler, Claudia M.; Nepstad, Daniel C.; Azevedo, Andrea A.; McGrath, David G.

    2013-01-01

    Land-use regulations are a critical component of forest governance and conservation strategies, but their effectiveness in shaping landholder behaviour is poorly understood. We conducted a spatial and temporal analysis of the Brazilian Forest Code (BFC) to understand the patterns of regulatory compliance over time and across changes in the policy, and the implications of these compliance patterns for the perceived costs to landholders and environmental performance of agricultural landscapes in the southern Amazon state of Mato Grosso. Landholdings tended to remain in compliance or not according to their status at the beginning of the study period. The perceived economic burden of BFC compliance on soya bean and beef producers (US$3–5.6 billion in net present value of the land) may in part explain the massive, successful campaign launched by the farm lobby to change the BFC. The ecological benefits of compliance (e.g. greater connectivity and carbon) with the BFC are diffuse and do not compete effectively with the economic benefits of non-compliance that are perceived by landholders. Volatile regulation of land-use decisions that affect billions in economic rent that could be captured is an inadequate forest governance instrument; effectiveness of such regulations may increase when implemented in tandem with positive incentives for forest conservation. PMID:23610168

  2. 40 CFR 194.23 - Models and computer codes.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Models and computer codes. 194.23... General Requirements § 194.23 Models and computer codes. (a) Any compliance application shall include: (1... obtain stable solutions; (iv) Computer models accurately implement the numerical models; i.e., computer...

  3. 40 CFR 194.23 - Models and computer codes.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Models and computer codes. 194.23... General Requirements § 194.23 Models and computer codes. (a) Any compliance application shall include: (1... obtain stable solutions; (iv) Computer models accurately implement the numerical models; i.e., computer...

  4. 40 CFR 194.23 - Models and computer codes.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Models and computer codes. 194.23... General Requirements § 194.23 Models and computer codes. (a) Any compliance application shall include: (1... obtain stable solutions; (iv) Computer models accurately implement the numerical models; i.e., computer...

  5. 40 CFR 194.23 - Models and computer codes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Models and computer codes. 194.23... General Requirements § 194.23 Models and computer codes. (a) Any compliance application shall include: (1... obtain stable solutions; (iv) Computer models accurately implement the numerical models; i.e., computer...

  6. 40 CFR 194.23 - Models and computer codes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Models and computer codes. 194.23... General Requirements § 194.23 Models and computer codes. (a) Any compliance application shall include: (1... obtain stable solutions; (iv) Computer models accurately implement the numerical models; i.e., computer...

  7. Mandating better buildings: a global review of building codes and prospects for improvement in the United States

    DOE PAGES

    Sun, Xiaojing; Brown, Marilyn A.; Cox, Matt; ...

    2015-03-11

    This paper provides a global overview of the design, implementation, and evolution of building energy codes. Reflecting alternative policy goals, building energy codes differ significantly across the United States, the European Union, and China. This review uncovers numerous innovative practices including greenhouse gas emissions caps per square meter of building space, energy performance certificates with retrofit recommendations, and inclusion of renewable energy to achieve “nearly zero-energy buildings”. These innovations motivated an assessment of an aggressive commercial building code applied to all US states, requiring both new construction and buildings with major modifications to comply with the latest version of themore » ASHRAE 90.1 Standards. Using the National Energy Modeling System (NEMS), we estimate that by 2035, such building codes in the United States could reduce energy for space heating, cooling, water heating and lighting in commercial buildings by 16%, 15%, 20% and 5%, respectively. Impacts on different fuels and building types, energy rates and bills as well as pollution emission reductions are also examined.« less

  8. A Study to Determine the Correlation between Continuity of Care and Patient Medication Compliance

    DTIC Science & Technology

    1984-08-01

    U (III FILE ’Y TO DETERMINE THE CORRELATION BETWEEN CONTINUITY OF CARE AND PATIENT MEDICATION COMPLIANCE IA Graduate Research Project Submitted to...43 APPENDIX A. PATIENT MEDICATION COMPLIANCE QUESTIONNAIRE . . . . . 45 B. COMPUTER CODED INPUT FORMAT . . . . . . . ...... 48 C. RESEARCH DATA...and that adhered to by the patient . This failure to comply with medical recommendations results in a waste of health resources, frustration to the

  9. National Tribal Building Codes Summit

    EPA Pesticide Factsheets

    National Tribal Building Codes summit statement developed to support tribes interested in adopting green and culturally-appropriate building systems to ensure safe, sustainable, affordable, and culturally-appropriate buildings on tribal lands.

  10. 78 FR 52607 - Unified Registration System

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-23

    ...'' and click ``Search.'' Next, click ``Open Docket Folder'' in the ``Actions'' column. Finally, in the... comments received are posted without change to http://www.regulations.gov . Anyone is able to search the... License CFR Code of Federal Regulations CMV Commercial Motor Vehicle CR Compliance Review CSA Compliance...

  11. Using Least-to-Most Assistive Prompt Hierarchy to Increase Child Compliance with Teacher Directives in Preschool Classrooms

    ERIC Educational Resources Information Center

    DiCarlo, Cynthia F.; Baumgartner, Jennifer I.; Caballero, Jamie O.; Powers, Courtney

    2017-01-01

    Prompt strategies have been used to increase the compliance of preschool-aged children to teacher directives. This paper describes two experiments conducted to determine if classroom teachers could learn to use the LtM prompt hierarchy and if child compliance would increase in response to teacher behavior. This study builds on the current…

  12. Need for Systematic Retrofit Analysis in Multifamily Buildings

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Malhotra, Mini; Im, Piljae

    2014-01-01

    Multifamily housing offers high potential for energy savings through retrofits. A comprehensive energy audit with systematic evaluation of alternative energy measures is one of the key steps to realizing the full energy savings potential. However, this potential often remains unrealized when the selection of measures is (1) based on a one-size-fits-all approach originating from accustomed practices, (2) intended merely to meet code-compliance requirements, and/or (3) influenced by owner renter split incentive. In such cases, the benefits of comprehensive energy auditing are disregarded in view of the apparent difficulty in diagnosing multifamily buildings, evaluating alternative measures, and installing customized sets ofmore » measures. This paper highlights some of the barriers encountered in a multifamily housing retrofit project in Georgia and demonstrates the merits of systematic retrofit analysis by identifying opportunities for higher energy savings and improved comfort and indoor air quality that were missed in this project. The study uses a whole-building energy analysis conducted for a 10-unit, low-rise, multifamily building of a 110-unit apartment complex. The analysis projected a 24% energy savings from the measures installed in the building with a payback period of 10 years. Further analysis with a systematic evaluation of alternative measures showed that without compromising on the objectives of durability, livability, and appearance of the building, energy savings of up to 34% were achievable with a payback period of 7 years. The paper concludes by outlining recommendations that may benefit future retrofit projects by improving the audit process, streamlining tasks, and achieving higher energy savings.« less

  13. Three decades of the WHO code and marketing of infant formulas.

    PubMed

    Forsyth, Stewart

    2012-05-01

    The International Code of Marketing of Breast Milk Substitutes states that governments, non-governmental organizations, experts, consumers and industry need to cooperate in activities aimed at improving infant nutrition. However, the evidence from the last three decades is that of a series of disputes, legal proceedings and boycotts. The purpose of this review is to assess the overall progress in the implementation of the Code and to examine the problematic areas of monitoring, compliance and governance. There are continuing issues of implementation, monitoring and compliance which predominantly reflect weak governance. Many Member States have yet to fully implement the Code recommendations and most States do not have adequate monitoring and reporting mechanisms. Application of the Code in developed countries may be undermined by a lack of consensus on the WHO recommendation of 6 months exclusive breastfeeding. There is evidence of continuing conflict and acrimony, especially between non-government organizations and industry. Measures need to be taken to encourage the Member States to implement the Code and to establish the governance systems that will not only ensure effective implementation and monitoring of the Code, but also deliver the Code within a spirit of participation, collaboration and trust.

  14. Predicting Regulatory Compliance in Beer Advertising on Facebook.

    PubMed

    Noel, Jonathan K; Babor, Thomas F

    2017-11-01

    The prevalence of alcohol advertising has been growing on social media platforms. The purpose of this study was to evaluate alcohol advertising on Facebook for regulatory compliance and thematic content. A total of 50 Budweiser and Bud Light ads posted on Facebook within 1 month of the 2015 NFL Super Bowl were evaluated for compliance with a self-regulated alcohol advertising code and for thematic content. An exploratory sensitivity/specificity analysis was conducted to determine if thematic content could predict code violations. The code violation rate was 82%, with violations prevalent in guidelines prohibiting the association of alcohol with success (Guideline 5) and health benefits (Guideline 3). Overall, 21 thematic content areas were identified. Displaying the product (62%) and adventure/sensation seeking (52%) were the most prevalent. There was perfect specificity (100%) for 10 content areas for detecting any code violation (animals, negative emotions, positive emotions, games/contests/promotions, female characters, minorities, party, sexuality, night-time, sunrise) and high specificity (>80%) for 10 content areas for detecting violations of guidelines intended to protect minors (animals, negative emotions, famous people, friendship, games/contests/promotions, minorities, responsibility messages, sexuality, sunrise, video games). The high prevalence of code violations indicates a failure of self-regulation to prevent potentially harmful content from appearing in alcohol advertising, including explicit code violations (e.g. sexuality). Routine violations indicate an unwillingness to restrict advertising content for public health purposes, and statutory restrictions may be necessary to sufficiently deter alcohol producers from repeatedly violating marketing codes. Violations of a self-regulated alcohol advertising code are prevalent in a sample of beer ads published on Facebook near the US National Football League's Super Bowl. Overall, 16 thematic content areas demonstrated high specificity for code violations. Alcohol advertising codes should be updated to expressly prohibit the use of such content. © The Author 2017. Medical Council on Alcohol and Oxford University Press. All rights reserved.

  15. The Influence of Building Codes on Recreation Facility Design.

    ERIC Educational Resources Information Center

    Morrison, Thomas A.

    1989-01-01

    Implications of building codes upon design and construction of recreation facilities are investigated (national building codes, recreation facility standards, and misperceptions of design requirements). Recreation professionals can influence architectural designers to correct past deficiencies, but they must understand architectural and…

  16. Building Standards and Codes for Energy Conservation

    ERIC Educational Resources Information Center

    Gross, James G.; Pierlert, James H.

    1977-01-01

    Current activity intended to lead to energy conservation measures in building codes and standards is reviewed by members of the Office of Building Standards and Codes Services of the National Bureau of Standards. For journal availability see HE 508 931. (LBH)

  17. Implementation of the U.S. Green Building Council’s LEEDS (trademark) as the Army’s Green Building Rating System

    DTIC Science & Technology

    2006-01-01

    Systems, Thermal Comfort 1 Credit 3 Enhanced Commissioning 1 Credit 7.1 Thermal Comfort , Compliance 1 Credit 4 Enhanced Refrigerant Management 1 Credit 7.2... Thermal Comfort , Validation ? Credit 5 Measurement & Verification 1 Credit 8.1 Daylight & Views, Daylight 75% of Spaces 1 Credit 6 Green Power N...Systems, Thermal Comfort 1 Credit 3 Enhanced Commissioning 1 Credit 7.1 Thermal Comfort , Compliance 1 Credit 4 Enhanced Refrigerant Management 1 Credit 7.2

  18. Development of probabilistic multimedia multipathway computer codes.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yu, C.; LePoire, D.; Gnanapragasam, E.

    2002-01-01

    The deterministic multimedia dose/risk assessment codes RESRAD and RESRAD-BUILD have been widely used for many years for evaluation of sites contaminated with residual radioactive materials. The RESRAD code applies to the cleanup of sites (soils) and the RESRAD-BUILD code applies to the cleanup of buildings and structures. This work describes the procedure used to enhance the deterministic RESRAD and RESRAD-BUILD codes for probabilistic dose analysis. A six-step procedure was used in developing default parameter distributions and the probabilistic analysis modules. These six steps include (1) listing and categorizing parameters; (2) ranking parameters; (3) developing parameter distributions; (4) testing parameter distributionsmore » for probabilistic analysis; (5) developing probabilistic software modules; and (6) testing probabilistic modules and integrated codes. The procedures used can be applied to the development of other multimedia probabilistic codes. The probabilistic versions of RESRAD and RESRAD-BUILD codes provide tools for studying the uncertainty in dose assessment caused by uncertain input parameters. The parameter distribution data collected in this work can also be applied to other multimedia assessment tasks and multimedia computer codes.« less

  19. 25 CFR 900.125 - What shall a construction contract proposal contain?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

  20. 25 CFR 900.125 - What shall a construction contract proposal contain?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

  1. 25 CFR 900.125 - What shall a construction contract proposal contain?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

  2. 25 CFR 900.125 - What shall a construction contract proposal contain?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

  3. 25 CFR 900.125 - What shall a construction contract proposal contain?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

  4. 78 FR 18321 - International Code Council: The Update Process for the International Codes and Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-26

    ... for Residential Construction in High Wind Regions. ICC 700: National Green Building Standard The..., coordinated, and necessary to regulate the built environment. Federal agencies frequently use these codes and... International Codes and Standards consist of the following: ICC Codes International Building Code. International...

  5. 75 FR 19944 - International Code Council: The Update Process for the International Codes and Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-16

    ... for Residential Construction in High Wind Areas. ICC 700: National Green Building Standard. The... Codes and Standards that are comprehensive, coordinated, and necessary to regulate the built environment... International Codes and Standards consist of the following: ICC Codes International Building Code. International...

  6. 24 CFR 200.926 - Minimum property standards for one and two family dwellings.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... property is to be located. (c) Standard for evaluating local or state building codes. The Secretary shall compare a local building code submitted under paragraph (d) of this section or a State code to the list of... each area and subarea on the list. (2) A State or local building code will be partially accepted if it...

  7. 24 CFR 200.926 - Minimum property standards for one and two family dwellings.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... property is to be located. (c) Standard for evaluating local or state building codes. The Secretary shall compare a local building code submitted under paragraph (d) of this section or a State code to the list of... each area and subarea on the list. (2) A State or local building code will be partially accepted if it...

  8. 24 CFR 200.926 - Minimum property standards for one and two family dwellings.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... property is to be located. (c) Standard for evaluating local or state building codes. The Secretary shall compare a local building code submitted under paragraph (d) of this section or a State code to the list of... each area and subarea on the list. (2) A State or local building code will be partially accepted if it...

  9. 75 FR 44184 - Aluminum tris(O-ethylphosphonate), Butylate, Chlorethoxyfos, Clethodim, et al.; Proposed...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-28

    ...: Crop production (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code... contamination of food, feed, or food-contact/feed-contact surfaces. Compliance with the tolerance level... Apply to Me? You may be potentially affected by this action if you are an agricultural producer, food...

  10. 28 CFR 36.606 - Effect of certification.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... the question of whether equipment in a building built according to the code satisfies the Act's... buildings and facilities that comply with the certified code. A submitting official may reapply for...

  11. 28 CFR 36.606 - Effect of certification.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... the question of whether equipment in a building built according to the code satisfies the Act's... buildings and facilities that comply with the certified code. A submitting official may reapply for...

  12. 28 CFR 36.606 - Effect of certification.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... the question of whether equipment in a building built according to the code satisfies the Act's... buildings and facilities that comply with the certified code. A submitting official may reapply for...

  13. 28 CFR 36.606 - Effect of certification.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... the question of whether equipment in a building built according to the code satisfies the Act's... buildings and facilities that comply with the certified code. A submitting official may reapply for...

  14. 10 CFR 435.306 - Selecting a life cycle effective proposed building design.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Selecting a life cycle effective proposed building design... Residential Buildings § 435.306 Selecting a life cycle effective proposed building design. In selecting... prototype, has the highest Net Savings or lowest total life cycle costs calculated in compliance with...

  15. 10 CFR 435.306 - Selecting a life cycle effective proposed building design.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Selecting a life cycle effective proposed building design... Residential Buildings § 435.306 Selecting a life cycle effective proposed building design. In selecting... prototype, has the highest Net Savings or lowest total life cycle costs calculated in compliance with...

  16. 10 CFR 435.306 - Selecting a life cycle effective proposed building design.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Selecting a life cycle effective proposed building design... Residential Buildings § 435.306 Selecting a life cycle effective proposed building design. In selecting... prototype, has the highest Net Savings or lowest total life cycle costs calculated in compliance with...

  17. 10 CFR 435.306 - Selecting a life cycle effective proposed building design.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Selecting a life cycle effective proposed building design... Residential Buildings § 435.306 Selecting a life cycle effective proposed building design. In selecting... prototype, has the highest Net Savings or lowest total life cycle costs calculated in compliance with...

  18. 77 FR 68884 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-16

    ... petition Docket Number FRA-2012-0060. A copy of the petition, as well as any written communications...] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 Code of Federal Regulations (CFR... equipment overhauls. PATH states that the material and inventory necessary to complete the required...

  19. Standard Energy Efficiency Data Platform

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cheifetz, D. Magnus

    2014-07-15

    The SEED platform is expected to be a building energy performance data management tool that provides federal, state and local governments, building owners and operators with an easy, flexible and cost-effective method to collect information about groups of buildings, oversee compliance with energy disclosure laws and demonstrate the economic and environmental benefits of energy efficiency. It will allow users to leverage a local application to manage data disclosure and large data sets without the IT investment of developing custom applications. The first users of SEED will be agencies that need to collect, store, and report/share large data sets generated bymore » benchmarking, energy auditing, retro-commissioning or retrofitting of many buildings. Similarly, building owners and operators will use SEED to manage their own energy data in a common format and centralized location. SEED users will also control the disclosure of their information for compliance requirements, recognition programs such as ENERGY STAR, or data sharing with the Buildings Performance Database and/or other third parties at their discretion.« less

  20. Continuation of research into language concepts for the mission support environment: Source code

    NASA Technical Reports Server (NTRS)

    Barton, Timothy J.; Ratner, Jeremiah M.

    1991-01-01

    Research into language concepts for the Mission Control Center is presented. A computer code for source codes is presented. The file contains the routines which allow source code files to be created and compiled. The build process assumes that all elements and the COMP exist in the current directory. The build process places as much code generation as possible on the preprocessor as possible. A summary is given of the source files as used and/or manipulated by the build routine.

  1. 38 CFR 39.63 - Architectural design standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Association Life Safety Code and Errata (NFPA 101), the 2003 edition of the NFPA 5000, Building Construction... section, all applicable local and State building codes and regulations must be observed. In areas not subject to local or State building codes, the recommendations contained in the 2003 edition of the NFPA...

  2. User preference as quality markers of paediatric web sites.

    PubMed

    Hernández-Borges, Angel A; Macías-Cervi, Pablo; Gaspar-Guardado, Asunción; Torres-Alvarez De Arcaya, María Luisa; Ruíz-Rabaza, Ana; Jiménez-Sosa, Alejandro

    2003-09-01

    Little is known about the ability of internet users to distinguish the best medical resources online, and how their preferences, measured by usage and popularity indexes, correlate with established quality criteria. Our objective was to analyse whether the number of inbound links and/or daily visits to a sample of paediatric web pages are reliable quality markers of the pages. Two-year follow-up study of 363 web pages with paediatric information. The number of inbound links and the average number of daily visits to the pages were calculated on a yearly basis. In addition, their rates of compliance with the codes of conduct, guidelines and/or principles of three international organizations were evaluated. The quality code most widely met by the sample web pages was the Health on the Net Foundation Code of Conduct (overall rate, 60.2%). Sample pages showed a low degree of compliance with principles related to privacy, confidentiality and electronic commerce (overall rate less than 45%). Most importantly, we observed a moderate, significant correlation between compliance with quality criteria and the number of inbound links (p < 0.001). However, no correlation was found between the number of daily visits to a page and its degree of compliance with the principles. Some indexes derived from the analysis of webmasters' hyperlinks could be reliable quality markers of medical web resources.

  3. 75 FR 37498 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing of Proposed Rule Change...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-29

    ... of a code of ethics by an investment advisor to include, at a minimum: (i) Standards of business... any violations of the code of ethics promptly to the chief compliance officer (``CCO'') or, provided the CCO also receives reports of all violations, to other persons designated in the code of ethics...

  4. Code Help: Can This Unique State Regulatory Intervention Improve Emergency Department Crowding?

    PubMed

    Michael, Sean S; Broach, John P; Kotkowski, Kevin A; Brush, D Eric; Volturo, Gregory A; Reznek, Martin A

    2018-05-01

    Emergency department (ED) crowding adversely affects multiple facets of high-quality care. The Commonwealth of Massachusetts mandates specific, hospital action plans to reduce ED boarding via a mechanism termed "Code Help." Because implementation appears inconsistent even when hospital conditions should have triggered its activation, we hypothesized that compliance with the Code Help policy would be associated with reduction in ED boarding time and total ED length of stay (LOS) for admitted patients, compared to patients seen when the Code Help policy was not followed. This was a retrospective analysis of data collected from electronic, patient-care, timestamp events and from a prospective Code Help registry for consecutive adult patients admitted from the ED at a single academic center during a 15-month period. For each patient, we determined whether the concurrent hospital status complied with the Code Help policy or violated it at the time of admission decision. We then compared ED boarding time and overall ED LOS for patients cared for during periods of Code Help policy compliance and during periods of Code Help policy violation, both with reference to patients cared for during normal operations. Of 89,587 adult patients who presented to the ED during the study period, 24,017 (26.8%) were admitted to an acute care or critical care bed. Boarding time ranged from zero to 67 hours 30 minutes (median 4 hours 31 minutes). Total ED LOS for admitted patients ranged from 11 minutes to 85 hours 25 minutes (median nine hours). Patients admitted during periods of Code Help policy violation experienced significantly longer boarding times (median 20 minutes longer) and total ED LOS (median 46 minutes longer), compared to patients admitted under normal operations. However, patients admitted during Code Help policy compliance did not experience a significant increase in either metric, compared to normal operations. In this single-center experience, implementation of the Massachusetts Code Help regulation was associated with reduced ED boarding time and ED LOS when the policy was consistently followed, but there were adverse effects on both metrics during violations of the policy.

  5. 10 CFR 1041.170 - Compliance procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... shall be responsible for coordinating implementing of this section. Complaints may be sent to Director... the Architectural and Transportation Barriers Compliance Board upon receipt of any complaint alleging that a building or facility that is subject to the Architectural Barriers Act of 1968, as amended (42 U...

  6. 41 CFR 102-76.10 - What basic design and construction policy governs Federal agencies?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... (c) Follow nationally recognized model building codes and other applicable nationally recognized codes that govern Federal construction to the maximum extent feasible and consider local building code requirements. (See 40 U.S.C. 3310 and 3312.) (d) Design Federal buildings to have a long life expectancy and...

  7. Building codes : obstacle or opportunity?

    Treesearch

    Alberto Goetzl; David B. McKeever

    1999-01-01

    Building codes are critically important in the use of wood products for construction. The codes contain regulations that are prescriptive or performance related for various kinds of buildings and construction types. A prescriptive standard might dictate that a particular type of material be used in a given application. A performance standard requires that a particular...

  8. Residential Building Energy Code Field Study

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    R. Bartlett, M. Halverson, V. Mendon, J. Hathaway, Y. Xie

    This document presents a methodology for assessing baseline energy efficiency in new single-family residential buildings and quantifying related savings potential. The approach was developed by Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy (DOE) Building Energy Codes Program with the objective of assisting states as they assess energy efficiency in residential buildings and implementation of their building energy codes, as well as to target areas for improvement through energy codes and broader energy-efficiency programs. It is also intended to facilitate a consistent and replicable approach to research studies of this type and establish a transparent data setmore » to represent baseline construction practices across U.S. states.« less

  9. Building codes: An often overlooked determinant of health.

    PubMed

    Chauvin, James; Pauls, Jake; Strobl, Linda

    2016-05-01

    Although the vast majority of the world's population spends most of their time in buildings, building codes are not often thought of as 'determinants of health'. The standards that govern the design, construction, and use of buildings affect our health, security, safety, and well-being. This is true for dwellings, schools, and universities, shopping centers, places of recreation, places of worship, health-care facilities, and workplaces. We urge proactive engagement by the global public health community in developing these codes, and in the design and implementation of health protection and health promotion activities intended to reduce the risk of injury, disability, and death, particularly when due to poor building code adoption/adaption, application, and enforcement.

  10. 78 FR 47824 - Petition for Waiver of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-06

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [Docket Number FRA-2013-0077] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 Code of Federal Regulations (CFR), this document provides the public notice that by a document dated July 16, 2013, the Association of American Railroads (AAR) has petitioned the...

  11. Overcoming Codes and Standards Barriers to Innovations in Building Energy Efficiency

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cole, Pamala C.; Gilbride, Theresa L.

    2015-02-15

    In this journal article, the authors discuss approaches to overcoming building code barriers to energy-efficiency innovations in home construction. Building codes have been a highly motivational force for increasing the energy efficiency of new homes in the United States in recent years. But as quickly as the codes seem to be changing, new products are coming to the market at an even more rapid pace, sometimes offering approaches and construction techniques unthought of when the current code was first proposed, which might have been several years before its adoption by various jurisdictions. Due to this delay, the codes themselves canmore » become barriers to innovations that might otherwise be helping to further increase the efficiency, comfort, health or durability of new homes. . The U.S. Department of Energy’s Building America, a program dedicated to improving the energy efficiency of America’s housing stock through research and education, is working with the U.S. housing industry through its research teams to help builders identify and remove code barriers to innovation in the home construction industry. The article addresses several approaches that builders use to achieve approval for innovative building techniques when code barriers appear to exist.« less

  12. 76 FR 13101 - Building Energy Codes Program: Presenting and Receiving Comments to DOE Proposed Changes to the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-10

    .... The IgCC is intended to provide a green model building code provisions for new and existing commercial... DEPARTMENT OF ENERGY 10 CFR Part 430 [Docket No. EERE-2011-BT-BC-0009] Building Energy Codes Program: Presenting and Receiving Comments to DOE Proposed Changes to the International Green Construction...

  13. Regulatory changes that affect coding for immunotherapy.

    PubMed

    Atwater, J Spencer

    2006-02-01

    During the past decade, a variety of federal regulations have had a significant impact on the way allergen immunotherapy is reimbursed and how Current Procedural Terminology (CPT) codes are used for this purpose. As mandated by the US Congress, the Centers for Medicare and Medicaid Services (CMS) through the Office of the Inspector General (OIG) targeted immunotherapy codes for scrutiny, because they are some of the most frequently used codes. To examine how federal regulations have affected reimbursement for allergy immunotherapy and other allergy services. A review was performed of the OIG survey of allergy immunotherapy and the OIG recommendations on CPT coding compliance guidelines. A preliminary survey found problems with medical appropriateness of allergen immunotherapy. For this reason, the OIG performed a more comprehensive study of 301 physicians using code 95165 to analyze by medical record and billing data whether the new billing rules were being correctly used and found that only 44% of physicians were following the new definition of a billable dose. In the early 1990s, the federal government served notice of its intent to more aggressively identify and prosecute health care providers who improperly billed and collected for medical services. Through the adoption of the 1991 US Sentencing Commission Guidelines, the government sought to enhance compliance by mandating lesser criminal penalties for violating organizations that nevertheless maintained and operated "effective compliance plans." In 2002, the OIG audited health care providers and recouped dollar 14.4 billion in improper payments by Medicare. Between January and June 2003, Medicare excluded 1,241 individual providers and health care entities due to fraudulent billing practices. Federal regulations have significantly affected reimbursement for allergy immunotherapy and other allergy services. Allergists need to be aware of these changes and implement the new recommendations into their practices.

  14. 75 FR 47045 - Self-Regulatory Organizations; Notice of Filing of Proposed Rule Change by NYSE Arca, Inc...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-04

    .... This Rule specifically requires the adoption of a code of ethics by an investment advisor to include... requiring supervised persons to report any violations of the code of ethics promptly to the chief compliance... designated in the code of ethics; and (v) provisions requiring the investment advisor to provide each of the...

  15. 24 CFR 200.926c - Model code provisions for use in partially accepted code jurisdictions.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... jurisdictions. If a lender or other interested party is notified that a State or local building code has been... in accordance with the applicable State or local building code, plus those additional requirements... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Model code provisions for use in...

  16. 24 CFR 200.926c - Model code provisions for use in partially accepted code jurisdictions.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... jurisdictions. If a lender or other interested party is notified that a State or local building code has been... in accordance with the applicable State or local building code, plus those additional requirements... 24 Housing and Urban Development 2 2013-04-01 2013-04-01 false Model code provisions for use in...

  17. 24 CFR 200.926c - Model code provisions for use in partially accepted code jurisdictions.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... jurisdictions. If a lender or other interested party is notified that a State or local building code has been... in accordance with the applicable State or local building code, plus those additional requirements... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Model code provisions for use in...

  18. 41 CFR 102-80.80 - With what general accident and fire prevention policy must Federal agencies comply?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... maximum extent feasible, comply with one of the nationally recognized model building codes and with other nationally-recognized codes in their construction or alteration of each building in accordance with 40 U.S.C. 3312; and (f) Use the applicable national codes and standards as a guide for their building operations...

  19. 41 CFR 102-80.80 - With what general accident and fire prevention policy must Federal agencies comply?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... maximum extent feasible, comply with one of the nationally recognized model building codes and with other nationally-recognized codes in their construction or alteration of each building in accordance with 40 U.S.C. 3312; and (f) Use the applicable national codes and standards as a guide for their building operations...

  20. 41 CFR 102-80.80 - With what general accident and fire prevention policy must Federal agencies comply?

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... maximum extent feasible, comply with one of the nationally recognized model building codes and with other nationally-recognized codes in their construction or alteration of each building in accordance with 40 U.S.C. 3312; and (f) Use the applicable national codes and standards as a guide for their building operations...

  1. 41 CFR 102-80.80 - With what general accident and fire prevention policy must Federal agencies comply?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... maximum extent feasible, comply with one of the nationally recognized model building codes and with other nationally-recognized codes in their construction or alteration of each building in accordance with 40 U.S.C. 3312; and (f) Use the applicable national codes and standards as a guide for their building operations...

  2. Innovation and Standardization in School Building: A Proposal for the National Code in Italy.

    ERIC Educational Resources Information Center

    Ridolfi, Giuseppe

    This document discusses the University of Florence's experience and concepts as it developed the research to define a proposal for designing a new national school building code. Section 1 examines the current school building code and the Italian Reform Process in Education between 1960 and 2000. Section 2 details and explains the new school…

  3. Sustainable and Net Zero Buildings on the NREL Campus | NREL

    Science.gov Websites

    NREL Campus Many of the high-performance buildings on NREL's South Table Mountain campus have achieved high-performance, sustainable buildings on the South Table Mountain (STM) campus as of FY17. The campus campus also reported 100% compliance with the Guiding Principles for High Performance Sustainable

  4. 10 CFR 434.518 - Service water heating.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Service water heating. 434.518 Section 434.518 Energy... RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.518 Service water heating. 518.1The service water loads for Prototype and Reference Buildings are defined in terms of Btu/h per person in...

  5. 24 CFR 200.949 - Building product standards and certification program for exterior insulated steel door systems.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... INTRODUCTION TO FHA PROGRAMS Minimum Property Standards § 200.949 Building product standards and certification... product, the administrator's certification of compliance with the applicable standards is required to be... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and...

  6. 24 CFR 200.947 - Building product standards and certification program for polystyrene foam insulation board.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... INTRODUCTION TO FHA PROGRAMS Minimum Property Standards § 200.947 Building product standards and certification... product, the administrator's certification of compliance with the applicable standards and the type of... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and...

  7. 10 CFR 434.518 - Service water heating.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Service water heating. 434.518 Section 434.518 Energy... RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.518 Service water heating. 518.1 The service water loads for Prototype and Reference Buildings are defined in terms of Btu/h per person in...

  8. 10 CFR 434.518 - Service water heating.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Service water heating. 434.518 Section 434.518 Energy... RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.518 Service water heating. 518.1The service water loads for Prototype and Reference Buildings are defined in terms of Btu/h per person in...

  9. Automating RPM Creation from a Source Code Repository

    DTIC Science & Technology

    2012-02-01

    apps/usr --with- libpq=/apps/ postgres make rm -rf $RPM_BUILD_ROOT umask 0077 mkdir -p $RPM_BUILD_ROOT/usr/local/bin mkdir -p $RPM_BUILD_ROOT...from a source code repository. %pre %prep %setup %build ./autogen.sh ; ./configure --with-db=/apps/db --with-libpq=/apps/ postgres make

  10. Through the Past Decade: How Advanced Energy Design Guides have influenced the Design Industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Liu, Bing; Athalye, Rahul A.

    Advanced Energy Design Guides (AEDGs) were originally developed intended to provide a simple approach to building professionals seeking energy efficient building designs better than ASHRAE Standard 90.1. Since its first book was released in 2004, the AEDG series provided inspiration for the design industry and were seen by designers as a starting point for buildings that wished to go beyond minimum codes and standards. In addition, U.S. Department of Energy’s successful Commercial Building Partnerships (CBP) program leveraged many of the recommendations from the AEDGs to achieve 50% energy savings over ASHRAE Standard 90.1-2004 for prototypical designs of large commercial entitiesmore » in the retail, banking and lodging sectors. Low-energy technologies and strategies developed during the CBP process have been applied by commercial partners throughout their national portfolio of buildings. Later, the AEDGs served as the perfect platform for both Standard 90.1 and ASHRAE’s high performance buildings standard, Standard 189.1. What was high performance a few years ago, however, has become minimum code today. Indeed, most of the prescriptive envelope component requirements in ASHRAE Standard 90.1-2013 are values recommended in the 50% AEDGs several years ago. Similarly, AEDG strategies and recommendations have penetrated the lighting and HVAC sections of both Standard 189.1 and Standard 90.1. Finally, as we look to the future of codes and standards, the AEDGs are serving as a blueprint for how minimum code requirements could be expressed. By customizing codes to specific building types, design strategies tailored for individual buildings could be prescribed as minimum code, just like in the AEDGs. This paper describes the impact that AEDGs have had over the last decade on the design industry and how they continue to influence the future of codes and Standards. From design professionals to code officials, everyone in the building industry has been affected by the AEDGs.« less

  11. [Reflections about non compliance].

    PubMed

    Consoli, S G

    2012-01-01

    Throughout the follow up of a patient suffering from a chronic cutaneous disease, non compliance is rarely avoidable. It is provoked by numerous factors, which have to be looked for in the patient and the doctor, as well, and in the external reality, as in the internal, psychic, reality, both of the patient and the doctor. Being aware of these factors is fundamental for resolving the non compliance conflict. Thus, non compliance can become a chance to seize for avoiding patients' wandering and building a more dynamic, authentic and stronger doctor-patient relationship. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

  12. Sustainable industrial estate by managing the building coverage ratio in Cibitung Industrial Town, Indonesia

    NASA Astrophysics Data System (ADS)

    Budiyanto, T. M. T.; Prajitno, I. S.; Hasibuan, H. S.

    2018-03-01

    The problem faced in the management of the industrial estate is the development of industrial buildings which are not in accordance with the existing environmental regulations, especially the building coverage ratio (BCR). This violation is due to the limitation of industrial land owned, and the tenant’s desire to maximize building area. This research conducted at Cibitung Industrial Town, Indonesia, to assess the compliance of industrial building in complying with environmental regulations, and efforts by industrial estate manager together with industrial communities to meet building regulations. The compliance is shown from the conformity of the tenant’s BCR to the building provisions contained in the regulation within the industrial estate; which is maximum 60% from land owned. And whether the rest of green open space (GOS) area can still be maintained at a minimum 10%. This study found tenant’s building density (BCR) at 24.55% population was 84.77%, and the rest of green open space at 21.56% population was only 2.49%. Excessive building development and expansion by the industrial communities, led to a continued reduction in green open space as a rainwater absorption area. It is resulting the rainfall runoff directly into the environmental drainage system, and causing flooding in the region.

  13. Performance-based building codes: a call for injury prevention indicators that bridge health and building sectors.

    PubMed

    Edwards, N

    2008-10-01

    The international introduction of performance-based building codes calls for a re-examination of indicators used to monitor their implementation. Indicators used in the building sector have a business orientation, target the life cycle of buildings, and guide asset management. In contrast, indicators used in the health sector focus on injury prevention, have a behavioural orientation, lack specificity with respect to features of the built environment, and do not take into account patterns of building use or building longevity. Suggestions for metrics that bridge the building and health sectors are discussed. The need for integrated surveillance systems in health and building sectors is outlined. It is time to reconsider commonly used epidemiological indicators in the field of injury prevention and determine their utility to address the accountability requirements of performance-based codes.

  14. International codes and agreements to restrict the promotion of harmful products can hold lessons for the control of alcohol marketing.

    PubMed

    Landon, Jane; Lobstein, Tim; Godfrey, Fiona; Johns, Paula; Brookes, Chris; Jernigan, David

    2017-01-01

    Background and aims The 2011 UN Summit on Non-Communicable Disease failed to call for global action on alcohol marketing despite calls in the World Health Organization (WHO) Global Action Plan on Non-Communicable Diseases 2013-20 to restrict or ban alcohol advertising. In this paper we ask what it might take to match the global approach to tobacco enshrined in the Framework Convention on Tobacco Control (FCTC), and suggest that public health advocates can learn from the development of the FCTC and the Code of Marketing on infant formula milks and the recent recommendations on restricting food marketing to children. Methods Narrative review of qualitative accounts of the processes that created and monitor existing codes and treaties to restrict the marketing of consumer products, specifically breast milk substitutes, unhealthy foods and tobacco. Findings The development of treaties and codes for market restrictions include: (i) evidence of a public health crisis; (ii) the cost of inaction; (iii) civil society advocacy; (iv) the building of capacity; (v) the management of conflicting interests in policy development; and (vi) the need to consider monitoring and accountability to ensure compliance. Conclusion International public health treaties and codes provide an umbrella under which national governments can strengthen their own legislation, assisted by technical support from international agencies and non-governmental organizations. Three examples of international agreements, those for breast milk substitutes, unhealthy foods and tobacco, can provide lessons for the public health community to make progress on alcohol controls. Lessons include stronger alliances of advocates and health professionals and better tools and capacity to monitor and report current marketing practices and trends. © 2016 Society for the Study of Addiction.

  15. Surface Coating of Wood Building Products: National Emission Standards for Hazardous Air Pollutants (NESHAP)

    EPA Pesticide Factsheets

    Learn about the NESHAP for surface coating of wood building products by reading the rule summary and history, with links to the federal register notices, additional documents, related rules and compliance information

  16. Technology Solutions Case Study: Air Leakage and Air Transfer Between Garage and Living Space, Waldorf, Maryland

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2014-11-01

    In this project, Building Science Corporation worked with production homebuilder K. Hovnanian to evaluate air transfer between the garage and living space in a single-family detached home constructed by a production homebuilder in compliance with the 2009 International Residential Code and the 2009 International Energy Conservation Code. The project gathered important information about the performance of whole-building ventilation systems and garage ventilation systems as they relate to minimizing flow of contaminated air from garage to living space. A series of 25 multipoint fan pressurization tests and additional zone pressure diagnostic testing measured the garage and house air leakage, the garage-to-housemore » air leakage, and garage and house pressure relationships to each other and to outdoors using automated fan pressurization and pressure monitoring techniques. While the relative characteristics of this house may not represent the entire population of new construction configurations and air tightness levels (house and garage) throughout the country, the technical approach was conservative and should reasonably extend the usefulness of the results to a large spectrum of house configurations from this set of parametric tests in this one house. Based on the results of this testing, the two-step garage-to-house air leakage test protocol described above is recommended where whole-house exhaust ventilation is employed. For houses employing whole-house supply ventilation (positive pressure) or balanced ventilation (same pressure effect as the baseline condition), adherence to the EPA Indoor airPLUS house-to-garage air sealing requirements should be sufficient to expect little to no garage-to-house air transfer.« less

  17. Building America Case Study: Air Leakage and Air Transfer Between Garage and Living Space, Waldorf, Maryland (Fact Sheet)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    2014-11-01

    This research project focused on evaluation of air transfer between the garage and living space in a single-family detached home constructed by a production homebuilder in compliance with the 2009 International Residential Code and the 2009 International Energy Conservation Code. The project gathered important information about the performance of whole-building ventilation systems and garage ventilation systems as they relate to minimizing flow of contaminated air from garage to living space. A series of 25 multi-point fan pressurization tests and additional zone pressure diagnostic testing characterized the garage and house air leakage, the garage-to-house air leakage, and garage and house pressuremore » relationships to each other and to outdoors using automated fan pressurization and pressure monitoring techniques. While the relative characteristics of this house may not represent the entire population of new construction configurations and air tightness levels (house and garage) throughout the country, the technical approach was conservative and should reasonably extend the usefulness of the results to a large spectrum of house configurations from this set of parametric tests in this one house. Based on the results of this testing, the two-step garage-to-house air leakage test protocol described above is recommended where whole-house exhaust ventilation is employed. For houses employing whole-house supply ventilation (positive pressure) or balanced ventilation (same pressure effect as the Baseline condition), adherence to the EPA Indoor airPLUS house-to-garage air sealing requirements should be sufficient to expect little to no garage-to-house air transfer.« less

  18. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Roth, Amir; Goldwasser, David; Parker, Andrew

    The OpenStudio software development kit has played a significant role in the adoption of the EnergyPlus whole building energy modeling engine and in the development and launch of new applications that use EnergyPlus for a variety of purposes, from design to auditing to code compliance and management of large portfolios. One of the most powerful features of the OpenStudio platform is Measure, a scripting facility similar to Excel's Visual Basic macros. Measures can be used to apply energy conservation measures to models--hence the name--to create reports and visualizations, and even to sew together custom workflows. Measures automate tedious tasks increasingmore » modeler productivity and reducing error. Measures have also become a currency in the OpenStudio tools ecosystem, a way to codify knowledge and protocol and transfer it from one modeler to another, either within an organization or within the global modeling community. This paper describes some of the many applications of Measures.« less

  19. Revision of seismic design codes corresponding to building damages in the ``5.12'' Wenchuan earthquake

    NASA Astrophysics Data System (ADS)

    Wang, Yayong

    2010-06-01

    A large number of buildings were seriously damaged or collapsed in the “5.12” Wenchuan earthquake. Based on field surveys and studies of damage to different types of buildings, seismic design codes have been updated. This paper briefly summarizes some of the major revisions that have been incorporated into the “Standard for classification of seismic protection of building constructions GB50223-2008” and “Code for Seismic Design of Buildings GB50011-2001.” The definition of seismic fortification class for buildings has been revisited, and as a result, the seismic classifications for schools, hospitals and other buildings that hold large populations such as evacuation shelters and information centers have been upgraded in the GB50223-2008 Code. The main aspects of the revised GB50011-2001 code include: (a) modification of the seismic intensity specified for the Provinces of Sichuan, Shanxi and Gansu; (b) basic conceptual design for retaining walls and building foundations in mountainous areas; (c) regularity of building configuration; (d) integration of masonry structures and pre-cast RC floors; (e) requirements for calculating and detailing stair shafts; and (f) limiting the use of single-bay RC frame structures. Some significant examples of damage in the epicenter areas are provided as a reference in the discussion on the consequences of collapse, the importance of duplicate structural systems, and the integration of RC and masonry structures.

  20. 75 FR 44814 - Audits of States, Local Governments, and Non-Profit Organizations; Circular A-133 Compliance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-29

    ... OFFICE OF MANAGEMENT AND BUDGET Audits of States, Local Governments, and Non-Profit Organizations... Budget. ACTION: Notice of availability of the 2010 Circular A-133 Compliance Supplement. SUMMARY: This... Management, Office of Management and Budget, 725 17th Street, NW., Room 6025, New Executive Office Building...

  1. 29 CFR 1910.35 - Compliance with alternate exit-route codes.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 1910.35 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Exit Routes and Emergency Planning § 1910.35...-route provisions of NFPA 101, Life Safety Code, 2009 edition, or the exit-route provisions of the...

  2. Monitoring compliance with the International Code of Marketing of Breastmilk Substitutes in west Africa: multisite cross sectional survey in Togo and Burkina Faso

    PubMed Central

    Aguayo, Victor M; Ross, Jay S; Kanon, Souleyman; Ouedraogo, Andre N

    2003-01-01

    Objectives To monitor compliance with the International Code of Marketing of Breastmilk Substitutes in health systems, sales outlets, distribution points, and the news media in Togo and Burkina Faso, west Africa. Design Multisite cross sectional survey. Participants Staff at 43 health facilities and 66 sales outlets and distribution points, 186 health providers, and 105 mothers of infants aged ⩽5 months in 16 cities. Results Six (14%) health facilities had received donations of breast milk substitutes. All donations were being given to mothers free of charge. Health providers in five (12%) health facilities had received free samples of breast milk substitutes for purposes other than professional research or evaluation. Health professionals in five (12%) health facilities had received promotional gifts from manufacturers. Promotional materials of commercial breast milk substitutes were found in seven (16%) health facilities. Special displays to market commercial breast milk substitutes were found in 29 (44%) sales and distribution points. Forty commercial breast milk substitutes violated the labelling standards of the code: 21 were manufactured by Danone, 11 by Nestlé, and eight by other national and international manufacturers. Most (148, 90%) health providers had never heard of the code, and 66 mothers (63%) had never received any counselling on breast feeding by their health providers. Conclusion In west Africa manufacturers are violating the code of marketing of breast milk substitutes. Comparable levels of code violations are observed with (Burkina Faso) or without (Togo) regulating legislation. Legislation must be accompanied by effective information, training, and monitoring systems to ensure that healthcare providers and manufacturers comply with evidence based practice and the code. What is already known on this topicAll member states of the World Health Assembly have reaffirmed their support for the International Code of Marketing of Breastmilk SubstitutesViolations by manufacturers of breast milk substitutes have been reported in industrialised and developing countriesWhat this study addsManufacturers of breast milk substitutes are violating the code in Togo and Burkina FasoThe levels of code violations are similar in a country with (Burkina Faso) and one without (Togo) legislation on the marketing of breast milk substitutesLegislation must be accompanied by effective information, training, and monitoring systems to ensure compliance with the code PMID:12531842

  3. American Academy of Audiology

    MedlinePlus

    ... AAA Foundation Volunteer Opportunities Professional Advancement eAudiology Continuing Education ABA Certification Meetings & Events Employee Resources Research Academia Practice Management Reimbursement Coding Compliance ...

  4. Maximizing Institutional Research Impact through Building Relationships and Collaborating within the Institution

    ERIC Educational Resources Information Center

    Kirby, Yvonne Kochera; Floyd, Nancy D.

    2015-01-01

    Building and maintaining relationships within the institution with shared goals for preserving compliance and presenting an accurate portrait of the institution is critical for effective external reporting. It can also provide immeasurable internal benefit to information stakeholders.

  5. Child Care Services and the NYS Uniform Fire Prevention and Building Code: A Building Code Examination of Child Day Care Services Which Are Regulated by the NYS Department of Social Services with Particular Attention to Day Care Centers and the Role of the Local Authority Having Jurisdiction.

    ERIC Educational Resources Information Center

    New York State Div. of Code Enforcement and Administration, Albany.

    This course manual details the Uniform Fire Prevention and Building Code of New York State and how it affects child care services, particularly day care centers. The sections of the manual, each detailing a part of the code, are: (1) Introduction, Scope, Registration, and Definitions and Facilities Regulated by the New York Department of Social…

  6. Probabilistic Seismic Hazard Assessment for Iraq

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Onur, Tuna; Gok, Rengin; Abdulnaby, Wathiq

    Probabilistic Seismic Hazard Assessments (PSHA) form the basis for most contemporary seismic provisions in building codes around the world. The current building code of Iraq was published in 1997. An update to this edition is in the process of being released. However, there are no national PSHA studies in Iraq for the new building code to refer to for seismic loading in terms of spectral accelerations. As an interim solution, the new draft building code was considering to refer to PSHA results produced in the late 1990s as part of the Global Seismic Hazard Assessment Program (GSHAP; Giardini et al.,more » 1999). However these results are: a) more than 15 years outdated, b) PGA-based only, necessitating rough conversion factors to calculate spectral accelerations at 0.3s and 1.0s for seismic design, and c) at a probability level of 10% chance of exceedance in 50 years, not the 2% that the building code requires. Hence there is a pressing need for a new, updated PSHA for Iraq.« less

  7. Qualitative assessment of cause-of-injury coding in U.S. military hospitals: NATO standardization agreement (STANAG) 2050.

    PubMed

    Amoroso, P J; Smith, G S; Bell, N S

    2000-04-01

    Accurate injury cause data are essential for injury prevention research. U.S. military hospitals, unlike civilian hospitals, use the NATO STANAG system for cause-of-injury coding. Reported deficiencies in civilian injury cause data suggested a need to specifically evaluate the STANAG. The Total Army Injury and Health Outcomes Database (TAIHOD) was used to evaluate worldwide Army injury hospitalizations, especially STANAG Trauma, Injury, and Place of Occurrence coding. We conducted a review of hospital procedures at Tripler Army Medical Center (TAMC) including injury cause and intent coding, potential crossover between acute injuries and musculoskeletal conditions, and data for certain hospital patients who are not true admissions. We also evaluated the use of free-text injury comment fields in three hospitals. Army-wide review of injury records coding revealed full compliance with cause coding, although nonspecific codes appeared to be overused. A small but intensive single hospital records review revealed relatively poor intent coding but good activity and cause coding. Data on specific injury history were present on most acute injury records and 75% of musculoskeletal conditions. Place of Occurrence coding, although inherently nonspecific, was over 80% accurate. Review of text fields produced additional details of the injuries in over 80% of cases. STANAG intent coding specificity was poor, while coding of cause of injury was at least comparable to civilian systems. The strengths of military hospital data systems are an exceptionally high compliance with injury cause coding, the availability of free text, and capture of all population hospital records without regard to work-relatedness. Simple changes in procedures could greatly improve data quality.

  8. Final Environmental Assessment: Base-Wide Building Demolition Arnold Air Force Base, Tennessee

    DTIC Science & Technology

    2006-02-01

    Building • Engine Test Facility ( ETF )-B Exhauster • ETF -A Airside • ETF -A Exhauster • ETF -A Reefer • CE Facility • Rocket Storage • Von Karman Gas...Executive Order ESA Endangered Species Act ETF Engine Test Facility FamCamp Family Camping Area P:\\ARNOLDAFB\\333402DO42COMPLIANCE\\DEMOLITION...Fabrication Shop • Natural Resources Building • Salt Storage Building • Administration Building • Engine Test Facility ( ETF )-B Exhauster • ETF -A

  9. Process improvement program evolves into compliance program at an integrated delivery system.

    PubMed

    Tyk, R C; Hylton, P G

    1998-09-01

    An integrated delivery system discovered questionable practices when it undertook a process-improvement initiative for its revenue-to-cash cycle. These discoveries served as a wake-up call to the organization that it needed to develop a comprehensive corporate compliance program. The organization engaged legal counsel to help it establish such a program. A corporate compliance officer was hired, and a compliance committee was set up. They worked with counsel to develop the structure and substance of the program and establish a corporate code of conduct that became a part of the organization's policies and procedures. Teams were formed in various areas of the organization to review compliance-related activities and suggest improvements. Clinical and nonclinical staff attended mandatory educational sessions about the program. By approaching compliance systematically, the organization has put itself in an excellent position to avoid fraudulent and abusive activities- and the government scrutiny they invite.

  10. Improving building energy efficiency in India: State-level analysis of building energy efficiency policies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yu, Sha; Tan, Qing; Evans, Meredydd

    India is expected to add 40 billion m2 of new buildings till 2050. Buildings are responsible for one third of India’s total energy consumption today and building energy use is expected to continue growing driven by rapid income and population growth. The implementation of the Energy Conservation Building Code (ECBC) is one of the measures to improve building energy efficiency. Using the Global Change Assessment Model, this study assesses growth in the buildings sector and impacts of building energy policies in Gujarat, which would help the state adopt ECBC and expand building energy efficiency programs. Without building energy policies, buildingmore » energy use in Gujarat would grow by 15 times in commercial buildings and 4 times in urban residential buildings between 2010 and 2050. ECBC improves energy efficiency in commercial buildings and could reduce building electricity use in Gujarat by 20% in 2050, compared to the no policy scenario. Having energy codes for both commercial and residential buildings could result in additional 10% savings in electricity use. To achieve these intended savings, it is critical to build capacity and institution for robust code implementation.« less

  11. 28 CFR 36.601 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.601... means a State law or local building code or similar ordinance, or part thereof, that establishes... designee. Certification of equivalency means a final certification that a code meets or exceeds the minimum...

  12. 28 CFR 36.601 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.601... means a State law or local building code or similar ordinance, or part thereof, that establishes... designee. Certification of equivalency means a final certification that a code meets or exceeds the minimum...

  13. 28 CFR 36.601 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.601... means a State law or local building code or similar ordinance, or part thereof, that establishes... designee. Certification of equivalency means a final certification that a code meets or exceeds the minimum...

  14. Compliance status of product labels to the international code on marketing of breast milk substitutes.

    PubMed

    Ergin, Ahmet; Hatipoğlu, Celile; Bozkurt, Ali Ihsan; Erdoğan, Aslı; Güler, Serdar; Ince, Gülberat; Kavurgacı, Nuran; Oz, Ahmet; Yeniay, Mustafa K

    2013-01-01

    The aim of this study was to determine the compliance status of product labels regarding Article 9 of the International Code on Marketing of Breast-milk Substitutes (the Code) in Denizli province, Turkey. A cross-sectional study design was employed to determine the compliance status. The product labels were obtained from a convenience sample of five supermarkets, one store and 5 pharmacies in the City centre and district of Honaz. Using a data collection form prepared by previously published studies, data were collected between July 26, 2010 and August 06, 2010. Data collection form included 13 criteria. In addition, we checked the boxes for the availability of a Turkish written label. Forty product labels of 7 companies were reached and evaluated. These products consisted of 83.0% of the products marketed by these companies in Turkey. Thirty seven (92.5%) of the labels violated Article 9 of the Code in terms of one or more criteria. Thirty four (85.0%) of the labels had photos or pictures idealizing the use of infant formula. Nine (22.5%) had a photo, a picture or any representation of an infant, and five (12.5%) had text which idealize the use of infant formula or discouraging breastfeeding. Eight (20%) did not state that breastfeeding is the best. Four (10%) had a term such as 'similar to breast milk or human milk'. In conclusion, the majority of the product labels of breast milk substitutes marketed in our country violate the Code. It is appropriate that the Turkish Ministry of Health, medical organizations, companies, and NGOs work more actively to increase awareness of this issue.

  15. Using fault tree analysis to identify causes of non-compliance: enhancing violation outcome data for the purposes of education and prevention.

    PubMed

    Emery, R J; Charlton, M A; Orders, A B; Hernandez, M

    2001-02-01

    An enhanced coding system for the characterization of notices of violation (NOV's) issued to radiation permit holders in the State of Texas was developed based on a series of fault tree analyses serving to identify a set of common causes. The coding system enhancement was retroactively applied to a representative sample (n = 185) of NOV's issued to specific licensees of radioactive materials in Texas during calendar year 1999. The results obtained were then compared to the currently available summary NOV information for the same year. In addition to identifying the most common NOV's, the enhanced coding system revealed that approximately 70% of the sampled NOV's were issued for non-compliance with a specific regulation as opposed to a permit condition. Furthermore, an underlying cause of 94% of the NOV's was the failure on the part of the licensee to execute a specific task. The findings suggest that opportunities exist to improve permit holder compliance through various means, including the creation of summaries which detail specific tasks to be completed, and revising training programs with more focus on the identification and scheduling of permit-related requirements. Broad application of these results is cautioned due to the bias associated with the restricted scope of the project.

  16. A comparison of IBC with 1997 UBC for modal response spectrum analysis in standard-occupancy buildings

    NASA Astrophysics Data System (ADS)

    Nahhas, Tariq M.

    2011-03-01

    This paper presents a comparison of the seismic forces generated from a Modal Response Spectrum Analysis (MRSA) by applying the provisions of two building codes, the 1997 Uniform Building Code (UBC) and the 2000-2009 International Building Code (IBC), to the most common ordinary residential buildings of standard occupancy. Considering IBC as the state of the art benchmark code, the primary concern is the safety of buildings designed using the UBC as compared to those designed using the IBC. A sample of four buildings with different layouts and heights was used for this comparison. Each of these buildings was assumed to be located at four different geographical sample locations arbitrarily selected to represent various earthquake zones on a seismic map of the USA, and was subjected to code-compliant response spectrum analyses for all sample locations and for five different soil types at each location. Response spectrum analysis was performed using the ETABS software package. For all the cases investigated, the UBC was found to be significantly more conservative than the IBC. The UBC design response spectra have higher spectral accelerations, and as a result, the response spectrum analysis provided a much higher base shear and moment in the structural members as compared to the IBC. The conclusion is that ordinary office and residential buildings designed using UBC 1997 are considered to be overdesigned, and therefore they are quite safe even according to the IBC provisions.

  17. Biosafety, biosecurity and internationally mandated regulatory regimes: compliance mechanisms for education and global health security

    PubMed Central

    Sture, Judi; Whitby, Simon; Perkins, Dana

    2015-01-01

    This paper highlights the biosafety and biosecurity training obligations that three international regulatory regimes place upon states parties. The duty to report upon the existence of such provisions as evidence of compliance is discussed in relation to each regime. We argue that such mechanisms can be regarded as building blocks for the development and delivery of complementary biosafety and biosecurity teaching and training materials. We show that such building blocks represent foundations upon which life and associated scientists – through greater awareness of biosecurity concerns – can better fulfil their responsibilities to guard their work from misuse in the future. PMID:24494580

  18. 75 FR 54347 - Draft Guidance for Industry: Bar Code Label Requirements-Questions and Answers (Question 12...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-07

    ...] Draft Guidance for Industry: Bar Code Label Requirements-- Questions and Answers (Question 12 Update... Administration (FDA) is announcing the availability of a draft document entitled ``Guidance for Industry: Bar... guidance provides you, manufacturers of a licensed vaccine, with advice concerning compliance with the bar...

  19. 75 FR 59101 - Defense Federal Acquisition Regulation Supplement; DoD Office of the Inspector General Address...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-27

    ....203-13, Contractor Code of Business Ethics and Conduct. DATES: Effective Date: September 27, 2010. FOR... Acquisition Regulation (FAR) Case 2007-006, ``Contractor Business Ethics Compliance Program and Disclosure... date of December 12, 2008. The contract clause entitled ``Contractor Code of Business Ethics and...

  20. 76 FR 32989 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-07

    .../Purpose: The loan, guarantee, or grant application is to obtain financing for infrastructure updates... will be located in Burlington, Iowa. The NAICS industry code for this enterprise is: 311812 (commercial..., Assistant Secretary for Employment and Training. [FR Doc. 2011-13937 Filed 6-6-11; 8:45 am] BILLING CODE...

  1. 28 CFR 36.607 - Effect of certification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... the question of whether equipment in a building built according to the code satisfies the Act's... equivalency only with respect to those features or elements that are both covered by the certified code and...

  2. 75 FR 76019 - Compliance Policy Guide Sec. 390.500 Definition of “High-Voltage Vacuum Switch”-21 CFR 1002.61(a...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-07

    ...] Compliance Policy Guide Sec. 390.500 Definition of ``High-Voltage Vacuum Switch''--21 CFR 1002.61(a)(3) and... Sec. 390.500 Definition of ``High-Voltage Vacuum Switch''--21 CFR 1002.61(a)(3) and (b)(2) (CPG Sec.... 2010-30677 Filed 12-6-10; 8:45 am] BILLING CODE 4160-01-P ...

  3. 37 CFR 360.4 - Compliance with statutory dates.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... to the Copyright Office Public Information Office, in the James Madison Memorial Building, Room LM... Congress, James Madison Memorial Building, 101 Independence Avenue, SE., Washington, DC 20559-6000. Claims... envelope must be addressed as follows: Copyright Royalty Board, Library of Congress, James Madison Memorial...

  4. 37 CFR 360.13 - Compliance with statutory dates.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... delivered to the Copyright Office Public Information Office, in the James Madison Memorial Building, Room LM... Congress, James Madison Memorial Building, 101 Independence Avenue, SE., Washington, DC 20559-6000. Claims... envelope must be addressed as follows: Copyright Royalty Board, Library of Congress, James Madison Memorial...

  5. 37 CFR 360.13 - Compliance with statutory dates.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... delivered to the Copyright Office Public Information Office, in the James Madison Memorial Building, Room LM... Congress, James Madison Memorial Building, 101 Independence Avenue, SE., Washington, DC 20559-6000. Claims... envelope must be addressed as follows: Copyright Royalty Board, Library of Congress, James Madison Memorial...

  6. 37 CFR 360.13 - Compliance with statutory dates.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... delivered to the Copyright Office Public Information Office, in the James Madison Memorial Building, Room LM... Congress, James Madison Memorial Building, 101 Independence Avenue, SE., Washington, DC 20559-6000. Claims... envelope must be addressed as follows: Copyright Royalty Board, Library of Congress, James Madison Memorial...

  7. 37 CFR 360.4 - Compliance with statutory dates.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... to the Copyright Office Public Information Office, in the James Madison Memorial Building, Room LM... Congress, James Madison Memorial Building, 101 Independence Avenue, SE., Washington, DC 20559-6000. Claims... envelope must be addressed as follows: Copyright Royalty Board, Library of Congress, James Madison Memorial...

  8. 37 CFR 360.4 - Compliance with statutory dates.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... to the Copyright Office Public Information Office, in the James Madison Memorial Building, Room LM... Congress, James Madison Memorial Building, 101 Independence Avenue, SE., Washington, DC 20559-6000. Claims... envelope must be addressed as follows: Copyright Royalty Board, Library of Congress, James Madison Memorial...

  9. 10 CFR 434.510 - Standard calculation procedure.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Standard calculation procedure. 434.510 Section 434.510... HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.510 Standard calculation procedure. 510.1The Standard Calculation Procedure consists of methods and assumptions for...

  10. 76 FR 64924 - Updating State Residential Building Energy Efficiency Codes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-19

    ...) considers high-rise (greater than three stories) multifamily residential buildings and hotel, motel, and..., duplexes, townhouses, row houses, and low-rise multifamily buildings (not greater than three stories) such... pumps as compared to other electric heating technologies, this code change is expected to increase the...

  11. 42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., the Self-Governance Tribe and the Secretary must agree upon and specify appropriate building codes and...-Governance Tribe in the preparation of its construction project proposal. If Tribal construction codes and standards (including national, regional, State, or Tribal building codes or construction industry standards...

  12. 42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., the Self-Governance Tribe and the Secretary must agree upon and specify appropriate building codes and...-Governance Tribe in the preparation of its construction project proposal. If Tribal construction codes and standards (including national, regional, State, or Tribal building codes or construction industry standards...

  13. 42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., the Self-Governance Tribe and the Secretary must agree upon and specify appropriate building codes and...-Governance Tribe in the preparation of its construction project proposal. If Tribal construction codes and standards (including national, regional, State, or Tribal building codes or construction industry standards...

  14. 42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., the Self-Governance Tribe and the Secretary must agree upon and specify appropriate building codes and...-Governance Tribe in the preparation of its construction project proposal. If Tribal construction codes and standards (including national, regional, State, or Tribal building codes or construction industry standards...

  15. 42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., the Self-Governance Tribe and the Secretary must agree upon and specify appropriate building codes and...-Governance Tribe in the preparation of its construction project proposal. If Tribal construction codes and standards (including national, regional, State, or Tribal building codes or construction industry standards...

  16. Technical Support Document for Version 3.6.1 of the COMcheck Software

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

    2009-09-29

    This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

  17. 7 CFR 1792.102 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... property will rank below the lien of another entity. Model Code—A building code developed for the adoption of local or state authorities or to be used as the basis of a local or state building code. NEHRP... Federally Assisted New Building Construction § 1792.102 Definitions. As used in this subpart, the following...

  18. 7 CFR 1792.102 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... property will rank below the lien of another entity. Model Code—A building code developed for the adoption of local or state authorities or to be used as the basis of a local or state building code. NEHRP... Federally Assisted New Building Construction § 1792.102 Definitions. As used in this subpart, the following...

  19. 7 CFR 1792.102 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... property will rank below the lien of another entity. Model Code—A building code developed for the adoption of local or state authorities or to be used as the basis of a local or state building code. NEHRP... Federally Assisted New Building Construction § 1792.102 Definitions. As used in this subpart, the following...

  20. 7 CFR 1792.102 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... property will rank below the lien of another entity. Model Code—A building code developed for the adoption of local or state authorities or to be used as the basis of a local or state building code. NEHRP... Federally Assisted New Building Construction § 1792.102 Definitions. As used in this subpart, the following...

  1. 7 CFR 1792.102 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... property will rank below the lien of another entity. Model Code—A building code developed for the adoption of local or state authorities or to be used as the basis of a local or state building code. NEHRP... Federally Assisted New Building Construction § 1792.102 Definitions. As used in this subpart, the following...

  2. Supporting Homework Compliance in Cognitive Behavioural Therapy: Essential Features of Mobile Apps

    PubMed Central

    Tang, Wei

    2017-01-01

    Cognitive behavioral therapy (CBT) is one of the most effective psychotherapy modalities used to treat depression and anxiety disorders. Homework is an integral component of CBT, but homework compliance in CBT remains problematic in real-life practice. The popularization of the mobile phone with app capabilities (smartphone) presents a unique opportunity to enhance CBT homework compliance; however, there are no guidelines for designing mobile phone apps created for this purpose. Existing literature suggests 6 essential features of an optimal mobile app for maximizing CBT homework compliance: (1) therapy congruency, (2) fostering learning, (3) guiding therapy, (4) connection building, (5) emphasis on completion, and (6) population specificity. We expect that a well-designed mobile app incorporating these features should result in improved homework compliance and better outcomes for its users. PMID:28596145

  3. Surface Coating of Wood Building Products National Emission Standards for Hazardous Air Pollutants (NESHAP) Questions and Answers (Q&A's)

    EPA Pesticide Factsheets

    This September 2004 document contains questions and answers on the Surface Coating of Wood Building Products National Emission Standards for Hazardous Air Pollutants (NESHAP) regulation. The questions cover topics such as compliance, and applicability, etc

  4. Modeling and Qualification of a Modified Emission Unit for Radioactive Air Emissions Stack Sampling Compliance.

    PubMed

    Barnett, J Matthew; Yu, Xiao-Ying; Recknagle, Kurtis P; Glissmeyer, John A

    2016-11-01

    A planned laboratory space and exhaust system modification to the Pacific Northwest National Laboratory Material Science and Technology Building indicated that a new evaluation of the mixing at the air sampling system location would be required for compliance to ANSI/HPS N13.1-2011. The modified exhaust system would add a third fan, thereby increasing the overall exhaust rate out the stack, thus voiding the previous mixing study. Prior to modifying the radioactive air emissions exhaust system, a three-dimensional computational fluid dynamics computer model was used to evaluate the mixing at the sampling system location. Modeling of the original three-fan system indicated that not all mixing criteria could be met. A second modeling effort was conducted with the addition of an air blender downstream of the confluence of the three fans, which then showed satisfactory mixing results. The final installation included an air blender, and the exhaust system underwent full-scale tests to verify velocity, cyclonic flow, gas, and particulate uniformity. The modeling results and those of the full-scale tests show agreement between each of the evaluated criteria. The use of a computational fluid dynamics code was an effective aid in the design process and allowed the sampling system to remain in its original location while still meeting the requirements for sampling at a well mixed location.

  5. New "Risk-Targeted" Seismic Maps Introduced into Building Codes

    USGS Publications Warehouse

    Luco, Nicholas; Garrett, B.; Hayes, J.

    2012-01-01

    Throughout most municipalities of the United States, structural engineers design new buildings using the U.S.-focused International Building Code (IBC). Updated editions of the IBC are published every 3 years. The latest edition (2012) contains new "risk-targeted maximum considered earthquake" (MCER) ground motion maps, which are enabling engineers to incorporate a more consistent and better defined level of seismic safety into their building designs.

  6. Regulatory Information By Sector

    EPA Pesticide Factsheets

    Find environmental regulatory, compliance, & enforcement information for various business, industry and government sectors, listed by NAICS code. Sectors include agriculture, automotive, petroleum manufacturing, oil & gas extraction & other manufacturing

  7. Pinoleville Pomo Nation Tribal Green Building Code

    EPA Pesticide Factsheets

    The Pinoleville Pomo Nation (PPN) worked with the U.S. Environmental Protection Agency (EPA) and the Development Center for Appropriate Technology (DCAT) to create this framework for tribal building codes.

  8. Deregulation of the Building Code and the Norwegian Approach to Regulation of Accessibility in the Built Environment.

    PubMed

    Lyngstad, Pål

    2016-01-01

    Deregulation is on the political agenda in the European countries. The Norwegian building code related to universal design and accessibility is challenged. To meet this, the Norwegian Building Authority have chosen to examine established truths and are basing their revised code on scientific research and field tests. But will this knowledge-based deregulation comply within the framework of the anti-discrimination act and, and if not: who suffers and to what extent?

  9. Fraud and abuse. Building an effective corporate compliance program.

    PubMed

    Matusicky, C F

    1998-04-01

    In 1997, General Health System (GHS), a not-for-profit integrated delivery system headquartered in Baton Rouge, Louisiana, developed a formal corporate compliance program. A newly appointed corporate compliance officer worked with key GHS managers and employees to assess the organization's current fraud and abuse prevention practices and recommend changes to meet new regulatory and organizational requirements. Then a structure for implementing these changes was developed, with staff training at its core. The program required a significant initial outlay of financial and human resources. The benefits to the organization, however, including a greater ability to respond quickly and effectively to possible compliance problems and better organizational communications, were worth the investment.

  10. Environmental Compliance Audit Handbook (ECAH): U.S. Fish and Wildlife Service (FWS) (Revision)

    DTIC Science & Technology

    1999-09-01

    with FWS, began research on this handbook. The concept was to combine the Code of Federal Regulations with good management practices and risk... The numbers of environmental laws and regulations have continued to grow in the United States, making compliance with these regulations increasingly...violations by the U.S. Environmental Protection Agency (USEPA). Beginning in 1993, the U.S. Army Construction Engineering Research Laboratory, in cooperation

  11. Environmental Compliance Assessment for Army Reserves (ECAAR)

    DTIC Science & Technology

    1991-11-01

    The number of environmental laws and regulations has continued to grow in the United States and worldwide, making compliance with these regulations...they became notices of violation. The concept was to combine Code of Federal Regulations and Army environmental regulations, with good management...items or operations to review, and would list a point of contact for that item to help assessors review the questions, or protocols, quickly and easily

  12. Energy Efficiency Program Administrators and Building Energy Codes

    EPA Pesticide Factsheets

    Explore how energy efficiency program administrators have helped advance building energy codes at federal, state, and local levels—using technical, institutional, financial, and other resources—and discusses potential next steps.

  13. 76 FR 6503 - Self-Regulatory Organizations; NYSE Arca, Inc.; Order Granting Approval of Proposed Rule Change...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-04

    ... specifically requires the adoption of a code of ethics by an investment advisor to include, at a minimum: (i... persons to report any violations of the code of ethics promptly to the chief compliance officer (``CCO... of ethics; and (v) provisions requiring the investment advisor to provide each of the supervised...

  14. Air Leakage and Air Transfer Between Garage and Living Space

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rudd, Armin

    2014-09-01

    This research project focused on evaluation of air transfer between the garage and living space in a single-family detached home constructed by a production homebuilder in compliance with the 2009 International Residential Code and the 2009 International Energy Conservation Code. The project gathered important information about the performance of whole-building ventilation systems and garage ventilation systems as they relate to minimizing flow of contaminated air from garage to living space. A series of 25 multi-point fan pressurization tests and additional zone pressure diagnostic testing characterized the garage and house air leakage, the garage-to-house air leakage, and garage and house pressuremore » relationships to each other and to outdoors using automated fan pressurization and pressure monitoring techniques. While the relative characteristics of this house may not represent the entire population of new construction configurations and air tightness levels (house and garage) throughout the country, the technical approach was conservative and should reasonably extend the usefulness of the results to a large spectrum of house configurations from this set of parametric tests in this one house. Based on the results of this testing, the two-step garage-to-house air leakage test protocol described above is recommended where whole-house exhaust ventilation is employed.« less

  15. Lemnos interoperable security project.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Halbgewachs, Ronald D.

    2010-03-01

    With the Lemnos framework, interoperability of control security equipment is straightforward. To obtain interoperability between proprietary security appliance units, one or both vendors must now write cumbersome 'translation code.' If one party changes something, the translation code 'breaks.' The Lemnos project is developing and testing a framework that uses widely available security functions and protocols like IPsec - to form a secure communications channel - and Syslog, to exchange security log messages. Using this model, security appliances from two or more different vendors can clearly and securely exchange information, helping to better protect the total system. Simplify regulatory compliance inmore » a complicated security environment by leveraging the Lemnos framework. As an electric utility, are you struggling to implement the NERC CIP standards and other regulations? Are you weighing the misery of multiple management interfaces against committing to a ubiquitous single-vendor solution? When vendors build their security appliances to interoperate using the Lemnos framework, it becomes practical to match best-of-breed offerings from an assortment of vendors to your specific control systems needs. The Lemnos project is developing and testing a framework that uses widely available open-source security functions and protocols like IPsec and Syslog to create a secure communications channel between appliances in order to exchange security data.« less

  16. 10 CFR 434.606 - Simulation tool.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Simulation tool. 434.606 Section 434.606 Energy DEPARTMENT... RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.606 Simulation tool. 606.1 The criteria established in subsection 521 for the selection of a simulation tool shall be followed when using the...

  17. 10 CFR 434.606 - Simulation tool.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Simulation tool. 434.606 Section 434.606 Energy DEPARTMENT... RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.606 Simulation tool. 606.1 The criteria established in subsection 521 for the selection of a simulation tool shall be followed when using the...

  18. 10 CFR 434.606 - Simulation tool.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Simulation tool. 434.606 Section 434.606 Energy DEPARTMENT... RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.606 Simulation tool. 606.1 The criteria established in subsection 521 for the selection of a simulation tool shall be followed when using the...

  19. 10 CFR 434.606 - Simulation tool.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Simulation tool. 434.606 Section 434.606 Energy DEPARTMENT... RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.606 Simulation tool. 606.1 The criteria established in subsection 521 for the selection of a simulation tool shall be followed when using the...

  20. 24 CFR 200.954 - Supplementary specific requirements under the HUD building product standard and certification...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... under the HUD building product standard and certification program for construction adhesives for wood... program for construction adhesives for wood floor systems. (a) Applicable standards. (1) All construction adhesives for field glued wood floor systems shall be designed, manufactured, and tested in compliance with...

  1. 24 CFR 200.954 - Supplementary specific requirements under the HUD building product standard and certification...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... under the HUD building product standard and certification program for construction adhesives for wood... program for construction adhesives for wood floor systems. (a) Applicable standards. (1) All construction adhesives for field glued wood floor systems shall be designed, manufactured, and tested in compliance with...

  2. 10 CFR 434.607 - Life cycle cost analysis criteria.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Life cycle cost analysis criteria. 434.607 Section 434.607... HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.607 Life cycle cost analysis criteria. 607.1 The following life cycle cost criteria applies to the fuel selection requirements...

  3. 10 CFR 434.607 - Life cycle cost analysis criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Life cycle cost analysis criteria. 434.607 Section 434.607... HIGH RISE RESIDENTIAL BUILDINGS Building Energy Compliance Alternative § 434.607 Life cycle cost analysis criteria. 607.1 The following life cycle cost criteria applies to the fuel selection requirements...

  4. 75 FR 54961 - Final Supplemental Environmental Impact Statement, Single Nuclear Unit at the Bellefonte Plant...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-09

    ... facility, a wind farm, a methane- gas cofiring facility, and several small solar photovoltaic facilities... maintenance of select plant systems and other regulatory compliance activities. Major buildings and plant... the plant cooling towers and the reactor, auxiliary, control, turbine, office, and service buildings...

  5. 10 CFR 434.519 - Controls.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Controls. 434.519 Section 434.519 Energy DEPARTMENT OF... BUILDINGS Building Energy Cost Compliance Alternative § 434.519 Controls. 519.1 All occupied conditioned...% occurrence) is greater than 59 °F, space heating need not be modeled. 519.2 Space temperature controls for...

  6. 10 CFR 434.519 - Controls.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Controls. 434.519 Section 434.519 Energy DEPARTMENT OF... BUILDINGS Building Energy Cost Compliance Alternative § 434.519 Controls. 519.1All occupied conditioned...) is greater than 59°F, space heating need not be modeled. 519.2Space temperature controls for the...

  7. 10 CFR 434.519 - Controls.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Controls. 434.519 Section 434.519 Energy DEPARTMENT OF... BUILDINGS Building Energy Cost Compliance Alternative § 434.519 Controls. 519.1All occupied conditioned...) is greater than 59°F, space heating need not be modeled. 519.2Space temperature controls for the...

  8. 10 CFR 434.519 - Controls.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Controls. 434.519 Section 434.519 Energy DEPARTMENT OF... BUILDINGS Building Energy Cost Compliance Alternative § 434.519 Controls. 519.1All occupied conditioned...) is greater than 59 °F, space heating need not be modeled. 519.2Space temperature controls for the...

  9. 10 CFR 434.519 - Controls.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Controls. 434.519 Section 434.519 Energy DEPARTMENT OF... BUILDINGS Building Energy Cost Compliance Alternative § 434.519 Controls. 519.1All occupied conditioned...) is greater than 59°F, space heating need not be modeled. 519.2Space temperature controls for the...

  10. 24 CFR 200.954 - Supplementary specific requirements under the HUD building product standard and certification...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... under the HUD building product standard and certification program for construction adhesives for wood... program for construction adhesives for wood floor systems. (a) Applicable standards. (1) All construction adhesives for field glued wood floor systems shall be designed, manufactured, and tested in compliance with...

  11. Addressing medical coding and billing part II: a strategy for achieving compliance. A risk management approach for reducing coding and billing errors.

    PubMed Central

    Adams, Diane L.; Norman, Helen; Burroughs, Valentine J.

    2002-01-01

    Medical practice today, more than ever before, places greater demands on physicians to see more patients, provide more complex medical services and adhere to stricter regulatory rules, leaving little time for coding and billing. Yet, the need to adequately document medical records, appropriately apply billing codes and accurately charge insurers for medical services is essential to the medical practice's financial condition. Many physicians rely on office staff and billing companies to process their medical bills without ever reviewing the bills before they are submitted for payment. Some physicians may not be receiving the payment they deserve when they do not sufficiently oversee the medical practice's coding and billing patterns. This article emphasizes the importance of monitoring and auditing medical record documentation and coding application as a strategy for achieving compliance and reducing billing errors. When medical bills are submitted with missing and incorrect information, they may result in unpaid claims and loss of revenue to physicians. Addressing Medical Audits, Part I--A Strategy for Achieving Compliance--CMS, JCAHO, NCQA, published January 2002 in the Journal of the National Medical Association, stressed the importance of preparing the medical practice for audits. The article highlighted steps the medical practice can take to prepare for audits and presented examples of guidelines used by regulatory agencies to conduct both medical and financial audits. The Medicare Integrity Program was cited as an example of guidelines used by regulators to identify coding errors during an audit and deny payment to providers when improper billing occurs. For each denied claim, payments owed to the medical practice are are also denied. Health care is, no doubt, a costly endeavor for health care providers, consumers and insurers. The potential risk to physicians for improper billing may include loss of revenue, fraud investigations, financial sanction, disciplinary action and exclusion from participation in government programs. Part II of this article recommends an approach for assessing potential risk, preventing improper billing, and improving financial management of the medical practice. Images p432-a PMID:12078924

  12. [Guideline compliance in hip fracture: results of an external quality-assurance program in North Rhine Westphalia: 2003-2005].

    PubMed

    Schulze Raestrup, U; Grams, A; Smektala, R

    2008-02-01

    Whereas the Scottish guidelines are audited annually, nobody evaluates guideline compliance in Germany. Thus, can external quality assurance data pursuant to section 137 of the German Social Code Book V be suitable for auditing guideline compliance? From North Rhine Westphalia, a total of 48,831 cases of femoral fractures near the hip joint were evaluated. Compliance with the guidelines was determined based on preoperative hospital stay, thrombosis, and antibiotic prophylaxis. Guideline rationale was reviewed in terms of mortality and thromboembolism rate. Sixty-four percent of the interventions were performed in a timely manner. Thrombosis prophylaxis was given in 99% of cases. Antibiotics were given as a single shot. There was no connection between mortality and thromboembolism rates or time to surgery. Guideline compliance is similar in German and Scotland. The external quality assurance data are suitable for evaluating guideline compliance. The literature recommends a short time to surgery. Given the short observation period, it was not possible to demonstrate any improvement in outcomes.

  13. The role of maternal stress during pregnancy, maternal discipline, and child COMT Val158Met genotype in the development of compliance.

    PubMed

    Kok, Rianne; Bakermans-Kranenburg, Marian J; van Ijzendoorn, Marinus H; Velders, Fleur P; Linting, Mariëlle; Jaddoe, Vincent W V; Hofman, Albert; Verhulst, Frank C; Tiemeier, Henning

    2013-07-01

    Maternal discipline is an important predictor of child committed compliance. Maternal stress can affect both parenting and child development. In a large population-based cohort study (N = 613) we examined whether maternal discipline mediated the association between maternal stress during pregnancy and child compliance, and whether COMT or DRD4 polymorphisms moderated the association between maternal discipline and child compliance. Family-related and general stress were measured through maternal self-report and genetic material was collected through cord blood sampling at birth. Mother-child dyads were observed at 36 months in disciplinary tasks in which the child was not allowed to touch attractive toys. Maternal discipline and child compliance were observed in two different tasks and independently coded. The association between family stress during pregnancy and child committed compliance was mediated by maternal positive discipline. Children with more COMT Met alleles seemed more susceptible to maternal positive discipline than children with more COMT Val alleles. Copyright © 2012 Wiley Periodicals, Inc.

  14. FY 2017-Progress Report on the Design and Construction of the Sodium Loop SMT-3

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Natesan, K.; Momozaki, Y.

    This report provides an update on the design of a forced-convection sodium loop to be used for the evaluation of sodium compatibility of advanced Alloy 709 with emphasis on long term exposures of tensile, creep, fatigue, creep fatigue, and fracture toughness ASTM-size specimens in support of ASME Code qualification and NRC licensing. The report is a deliverable (Level 4) in FY17 (M4AT-17AN1602094), under the Work Package AT-17AN160209, “Sodium Compatibility” performed by Argonne National Laboratory (ANL), as part of the Advanced Materials Program for the Advanced Reactor Technology. This work package enables the development of advanced structural materials by providing corrosion,more » microstructure, and mechanical property data from the standpoint of sodium compatibility of advanced structural alloys. The first sodium loop (SMT-1) with a single tank was constructed in 2011 at ANL and has been in operation for exposure of subsize sheet specimens of advanced alloys at a single temperature. The second sodium loop with dual tanks (SMT-2) was constructed in 2013 and has been in operation for the exposure of subsize sheet specimens of advanced alloys at two different temperatures. The current loop (SMT-3) has been designed to incorporate sufficient chamber capacity to expose a large number of ASTM-size specimens to evaluate the sodium effects on tensile, creep, fatigue, creep-fatigue, and fracture toughness properties, in support of ASME Code Qualification and USNRC Licensing. The design of individual components for the third sodium loop SMT-3 is almost complete. The design also has been sent to an outside vendor for piping analysis to be in compliance with ASME Code. A purchase order has been placed with an outside vendor for the fabrication of major components such as the specimen exposure tanks. However, we have contracted with another vendor to establish the piping design in compliance with ASME design codes. The piping design was completed in FY2017 and the information is being transmitted to the tank fabricator. The SMT-3 loop will be located in Building 206 adjacent to the currently operating SMT-2 loop. In addition, we have demolished the aged power supply system in Building 206 and installed a new transformer, wiring, and power panels for the new loop. Procurement of some of the long lead items such as valves, EM pumps, EM flowmeters, etc. is in progress and will continue in FY 2018. The construction of components such as cold trap, economizers, piping arrangement etc. will be performed in the central shops at ANL. About 150 liters of sodium for the loop will be procured in early FY2018. The loop system is designed to circulate sodium through the sample tanks and the associated loop without an operator for an extended period of time. With the three sodium loops (with single-tank, dual-tank and four–tanks), materials can be tested at different sodium temperatures, and large tensile, creep, fatigue, creep-fatigue, and fracture toughness specimens can be exposed to sodium for extended periods of time and generate data on mechanical properties in support of ASME Code Qualification and USNRC Licensing of advanced Alloy 709 for use as a structural material in SFRs.« less

  15. Quick Response codes for surgical safety: a prospective pilot study.

    PubMed

    Dixon, Jennifer L; Smythe, William Roy; Momsen, Lara S; Jupiter, Daniel; Papaconstantinou, Harry T

    2013-09-01

    Surgical safety programs have been shown to reduce patient harm; however, there is variable compliance. The purpose of this study is to determine if innovative technology such as Quick Response (QR) codes can facilitate surgical safety initiatives. We prospectively evaluated the use of QR codes during the surgical time-out for 40 operations. Feasibility and accuracy were assessed. Perceptions of the current time-out process and the QR code application were evaluated through surveys using a 5-point Likert scale and binomial yes or no questions. At baseline (n = 53), survey results from the surgical team agreed or strongly agreed that the current time-out process was efficient (64%), easy to use (77%), and provided clear information (89%). However, 65% of surgeons felt that process improvements were needed. Thirty-seven of 40 (92.5%) QR codes scanned successfully, of which 100% were accurate. Three scan failures resulted from excessive curvature or wrinkling of the QR code label on the body. Follow-up survey results (n = 33) showed that the surgical team agreed or strongly agreed that the QR program was clearer (70%), easier to use (57%), and more accurate (84%). Seventy-four percent preferred the QR system to the current time-out process. QR codes accurately transmit patient information during the time-out procedure and are preferred to the current process by surgical team members. The novel application of this technology may improve compliance, accuracy, and outcomes. Copyright © 2013 Elsevier Inc. All rights reserved.

  16. 24 CFR 905.10 - Capital Fund formula (CFF).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... projects; (ii) Vacancy reduction; (iii) Addressing deferred maintenance needs and the replacement of obsolete utility systems and dwelling equipment; (iv) Planned code compliance; (v) Management improvements...

  17. 24 CFR 905.10 - Capital Fund formula (CFF).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... projects; (ii) Vacancy reduction; (iii) Addressing deferred maintenance needs and the replacement of obsolete utility systems and dwelling equipment; (iv) Planned code compliance; (v) Management improvements...

  18. Do code of conduct audits improve chemical safety in garment factories? Lessons on corporate social responsibility in the supply chain from Fair Wear Foundation.

    PubMed

    Lindholm, Henrik; Egels-Zandén, Niklas; Rudén, Christina

    2016-10-01

    In managing chemical risks to the environment and human health in supply chains, voluntary corporate social responsibility (CSR) measures, such as auditing code of conduct compliance, play an important role. To examine how well suppliers' chemical health and safety performance complies with buyers' CSR policies and whether audited factories improve their performance. CSR audits (n = 288) of garment factories conducted by Fair Wear Foundation (FWF), an independent non-profit organization, were analyzed using descriptive statistics and statistical modeling. Forty-three per cent of factories did not comply with the FWF code of conduct, i.e. received remarks on chemical safety. Only among factories audited 10 or more times was there a significant increase in the number of factories receiving no remarks. Compliance with chemical safety requirements in garment supply chains is low and auditing is statistically correlated with improvements only at factories that have undergone numerous audits.

  19. Do code of conduct audits improve chemical safety in garment factories? Lessons on corporate social responsibility in the supply chain from Fair Wear Foundation

    PubMed Central

    2016-01-01

    Background In managing chemical risks to the environment and human health in supply chains, voluntary corporate social responsibility (CSR) measures, such as auditing code of conduct compliance, play an important role. Objectives To examine how well suppliers’ chemical health and safety performance complies with buyers’ CSR policies and whether audited factories improve their performance. Methods CSR audits (n = 288) of garment factories conducted by Fair Wear Foundation (FWF), an independent non-profit organization, were analyzed using descriptive statistics and statistical modeling. Results Forty-three per cent of factories did not comply with the FWF code of conduct, i.e. received remarks on chemical safety. Only among factories audited 10 or more times was there a significant increase in the number of factories receiving no remarks. Conclusions Compliance with chemical safety requirements in garment supply chains is low and auditing is statistically correlated with improvements only at factories that have undergone numerous audits. PMID:27611103

  20. A commercial building energy standard for Mexico

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Huang, J.; Warner, J.L.; Wiel, S.

    1998-07-01

    Beginning in 1992, the Comission Nacional de Ahorro de Energia (CONAE), or Mexican National Commission for Energy Conservation, developed a national energy standard for commercial buildings, with assistance from USAID and LBNL. The first complete draft of the standard was released for public review in mid-1995. To promote public acceptance of the standard, CONAE held advisory meetings with architects, engineers, and utility representatives, and organized pubic workshops presented by the authors, with support from USAID. In response to industry comments, the standard was revised in late 1997 and is currently under review by CONAE. It is anticipated that the revisedmore » draft will be released again for final public comments in the summer of 1998. The standard will become law one year after it is finalized by CONAE and published in the federal government record. Since Mexico consists of cooling-dominated climates, the standard emphasizes energy-efficient envelope design to control solar and conductive heat gains. The authors extended DOE-2 simulation results for four climates to all of Mexico through regression analysis. Based on these results, they developed a simplified custom budget calculation approach. To facilitate the method's use, a calculation template was devised in a spreadsheet program and distributed to the public. CONAE anticipates that local engineering associations will use this spreadsheet to administer code compliance.« less

  1. ISO-IEC MPEG-2 software video codec

    NASA Astrophysics Data System (ADS)

    Eckart, Stefan; Fogg, Chad E.

    1995-04-01

    Part 5 of the International Standard ISO/IEC 13818 `Generic Coding of Moving Pictures and Associated Audio' (MPEG-2) is a Technical Report, a sample software implementation of the procedures in parts 1, 2 and 3 of the standard (systems, video, and audio). This paper focuses on the video software, which gives an example of a fully compliant implementation of the standard and of a good video quality encoder, and serves as a tool for compliance testing. The implementation and some of the development aspects of the codec are described. The encoder is based on Test Model 5 (TM5), one of the best, published, non-proprietary coding models, which was used during MPEG-2 collaborative stage to evaluate proposed algorithms and to verify the syntax. The most important part of the Test Model is controlling the quantization parameter based on the image content and bit rate constraints under both signal-to-noise and psycho-optical aspects. The decoder has been successfully tested for compliance with the MPEG-2 standard, using the ISO/IEC MPEG verification and compliance bitstream test suites as stimuli.

  2. Building an ontology of pulmonary diseases with natural language processing tools using textual corpora.

    PubMed

    Baneyx, Audrey; Charlet, Jean; Jaulent, Marie-Christine

    2007-01-01

    Pathologies and acts are classified in thesauri to help physicians to code their activity. In practice, the use of thesauri is not sufficient to reduce variability in coding and thesauri are not suitable for computer processing. We think the automation of the coding task requires a conceptual modeling of medical items: an ontology. Our task is to help lung specialists code acts and diagnoses with software that represents medical knowledge of this concerned specialty by an ontology. The objective of the reported work was to build an ontology of pulmonary diseases dedicated to the coding process. To carry out this objective, we develop a precise methodological process for the knowledge engineer in order to build various types of medical ontologies. This process is based on the need to express precisely in natural language the meaning of each concept using differential semantics principles. A differential ontology is a hierarchy of concepts and relationships organized according to their similarities and differences. Our main research hypothesis is to apply natural language processing tools to corpora to develop the resources needed to build the ontology. We consider two corpora, one composed of patient discharge summaries and the other being a teaching book. We propose to combine two approaches to enrich the ontology building: (i) a method which consists of building terminological resources through distributional analysis and (ii) a method based on the observation of corpus sequences in order to reveal semantic relationships. Our ontology currently includes 1550 concepts and the software implementing the coding process is still under development. Results show that the proposed approach is operational and indicates that the combination of these methods and the comparison of the resulting terminological structures give interesting clues to a knowledge engineer for the building of an ontology.

  3. DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    This document contains the State Building Energy Codes Status prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy under Contract DE-AC06-76RL01830 and dated September 1996. The U.S. Department of Energy`s Office of Codes and Standards has developed this document to provide an information resource for individuals interested in energy efficiency of buildings and the relevant building energy codes in each state and U.S. territory. This is considered to be an evolving document and will be updated twice a year. In addition, special state updates will be issued as warranted.

  4. Data Collection Handbook to Support Modeling Impacts of Radioactive Material in Soil and Building Structures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yu, Charley; Kamboj, Sunita; Wang, Cheng

    2015-09-01

    This handbook is an update of the 1993 version of the Data Collection Handbook and the Radionuclide Transfer Factors Report to support modeling the impact of radioactive material in soil. Many new parameters have been added to the RESRAD Family of Codes, and new measurement methodologies are available. A detailed review of available parameter databases was conducted in preparation of this new handbook. This handbook is a companion document to the user manuals when using the RESRAD (onsite) and RESRAD-OFFSITE code. It can also be used for RESRAD-BUILD code because some of the building-related parameters are included in this handbook.more » The RESRAD (onsite) has been developed for implementing U.S. Department of Energy Residual Radioactive Material Guidelines. Hydrogeological, meteorological, geochemical, geometrical (size, area, depth), crops and livestock, human intake, source characteristic, and building characteristic parameters are used in the RESRAD (onsite) code. The RESRAD-OFFSITE code is an extension of the RESRAD (onsite) code and can also model the transport of radionuclides to locations outside the footprint of the primary contamination. This handbook discusses parameter definitions, typical ranges, variations, and measurement methodologies. It also provides references for sources of additional information. Although this handbook was developed primarily to support the application of RESRAD Family of Codes, the discussions and values are valid for use of other pathway analysis models and codes.« less

  5. 26 CFR 1.148-7 - Spending exceptions to the rebate requirement.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... finance a new office building. A uses proceeds of the bonds to purchase materials to be used in... contributes its ratable share of the cost of building the new facility to the project manager for the facility... expectations test for future earnings. For purposes of determining compliance with the spending requirements as...

  6. 26 CFR 1.148-7 - Spending exceptions to the rebate requirement.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... finance a new office building. A uses proceeds of the bonds to purchase materials to be used in... contributes its ratable share of the cost of building the new facility to the project manager for the facility... expectations test for future earnings. For purposes of determining compliance with the spending requirements as...

  7. 26 CFR 1.148-7 - Spending exceptions to the rebate requirement.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... finance a new office building. A uses proceeds of the bonds to purchase materials to be used in... contributes its ratable share of the cost of building the new facility to the project manager for the facility... expectations test for future earnings. For purposes of determining compliance with the spending requirements as...

  8. BOCA BASIC BUILDING CODE. 4TH ED., 1965 AND 1967. BOCA BASIC BUILDING CODE ACCUMULATIVE SUPPLEMENT.

    ERIC Educational Resources Information Center

    Building Officials Conference of America, Inc., Chicago, IL.

    NATIONALLY RECOGNIZED STANDARDS FOR THE EVALUATION OF MINIMUM SAFE PRACTICE OR FOR DETERMINING THE PERFORMANCE OF MATERIALS OR SYSTEMS OF CONSTRUCTION HAVE BEEN COMPILED AS AN AID TO DESIGNERS AND LOCAL OFFICIALS. THE CODE PRESENTS REGULATIONS IN TERMS OF MEASURED PERFORMANCE RATHER THAN IN RIGID SPECIFICATION OF MATERIALS OR METHODS. THE AREAS…

  9. Green Building Tools for Tribes

    EPA Pesticide Factsheets

    Tribal green building tools and funding information to support tribal building code adoption, healthy building, siting, energy efficiency, renewable energy, water conservation, green building materials, recycling and adaptation and resilience.

  10. BioPartsBuilder: a synthetic biology tool for combinatorial assembly of biological parts.

    PubMed

    Yang, Kun; Stracquadanio, Giovanni; Luo, Jingchuan; Boeke, Jef D; Bader, Joel S

    2016-03-15

    Combinatorial assembly of DNA elements is an efficient method for building large-scale synthetic pathways from standardized, reusable components. These methods are particularly useful because they enable assembly of multiple DNA fragments in one reaction, at the cost of requiring that each fragment satisfies design constraints. We developed BioPartsBuilder as a biologist-friendly web tool to design biological parts that are compatible with DNA combinatorial assembly methods, such as Golden Gate and related methods. It retrieves biological sequences, enforces compliance with assembly design standards and provides a fabrication plan for each fragment. BioPartsBuilder is accessible at http://public.biopartsbuilder.org and an Amazon Web Services image is available from the AWS Market Place (AMI ID: ami-508acf38). Source code is released under the MIT license, and available for download at https://github.com/baderzone/biopartsbuilder joel.bader@jhu.edu Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press.

  11. 25 CFR 36.104 - What are the requirements for heating, ventilation, cooling and lighting at dormitories?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... building codes in the Bureau of Indian Affairs “School Facilities Design Handbook,” dated March 30, 2007... any proposal to change which building codes are included in the Bureau of Indian Affairs “School... inspect the Handbook at the Department of the Interior Library, Main Interior Building, 1849 C Street NW...

  12. 25 CFR 36.104 - What are the requirements for heating, ventilation, cooling and lighting at dormitories?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... building codes in the Bureau of Indian Affairs “School Facilities Design Handbook,” dated March 30, 2007... any proposal to change which building codes are included in the Bureau of Indian Affairs “School... inspect the Handbook at the Department of the Interior Library, Main Interior Building, 1849 C Street NW...

  13. 10 CFR 420.2 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Planning Organization means that organization required by the Department of Transportation, and designated... planning provisions in a Standard Metropolitan Statistical Area. Model Energy Code, 1993, including Errata, means the model building code published by the Council of American Building Officials, which is...

  14. 25 CFR 256.10 - When do I qualify for Category C assistance?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... living The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

  15. 25 CFR 256.10 - When do I qualify for Category C assistance?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

  16. 25 CFR 256.10 - When do I qualify for Category C assistance?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... living The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

  17. 25 CFR 256.10 - When do I qualify for Category C assistance?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... living The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

  18. 25 CFR 256.10 - When do I qualify for Category C assistance?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... living The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

  19. Energy and Environment Guide to Action - Chapter 4.3: Building Codes for Energy Efficiency

    EPA Pesticide Factsheets

    Provides guidance and recommendations for establishing, implementing, and evaluating state building codes for energy efficiency, which improve energy efficiency in new construction and major renovations. State success stories are included for reference.

  20. Energy Consumption Evaluation of United States Navy Leed Certified Building For Fiscal Year 2009

    DTIC Science & Technology

    2010-01-01

    administration functions, classroom training, laboratory functions, personnel detention, and a fully functioning dog kennel on the exterior of the...Leadership in Energy and Environmental Design (LEED) Silver certified by the United States Green Building Council (USGBC). The goal of this effort is in...and Environmental Design (LEED) Silver certified by the United States Green Building Council (USGBC). The goal of this effort is in compliance with

  1. Supporting Homework Compliance in Cognitive Behavioural Therapy: Essential Features of Mobile Apps.

    PubMed

    Tang, Wei; Kreindler, David

    2017-06-08

    Cognitive behavioral therapy (CBT) is one of the most effective psychotherapy modalities used to treat depression and anxiety disorders. Homework is an integral component of CBT, but homework compliance in CBT remains problematic in real-life practice. The popularization of the mobile phone with app capabilities (smartphone) presents a unique opportunity to enhance CBT homework compliance; however, there are no guidelines for designing mobile phone apps created for this purpose. Existing literature suggests 6 essential features of an optimal mobile app for maximizing CBT homework compliance: (1) therapy congruency, (2) fostering learning, (3) guiding therapy, (4) connection building, (5) emphasis on completion, and (6) population specificity. We expect that a well-designed mobile app incorporating these features should result in improved homework compliance and better outcomes for its users. ©Wei Tang, David Kreindler. Originally published in JMIR Mental Health (http://mental.jmir.org), 08.06.2017.

  2. So much to do, so little time. To accomplish the mandatory initiatives of ARRA, healthcare organizations will require significant and thoughtful planning, prioritization and execution.

    PubMed

    Klein, Kimberly

    2010-01-01

    The American Recovery and Reinvestment Act of 2009 (ARRA) has set forth legislation for the healthcare community to achieve adoption of electronic health records (EHR), as well as form data standards, health information exchanges (HIE) and compliance with more stringent security and privacy controls under the HITECH Act. While the Office of the National Coordinator for Health Information Technology (ONCHIT) works on the definition of both "meaningful use" and "certification" of information technology systems, providers in particular must move forward with their IT initiatives to achieve the basic requirements for Medicare and Medicaid incentives starting in 2011, and avoid penalties that will reduce reimbursement beginning in 2015. In addition, providers, payors, government and non-government stakeholders will all have to balance the implementation of EHRs, working with HIEs, at the same time that they must upgrade their systems to be in compliance with ICD-10 and HIPAA 5010 code sets. Compliance deadlines for EHRs and HIEs begin in 2011, while ICD-10 diagnosis and procedure code sets compliance is required by October 2013 and HIPAA 5010 transaction sets, with one exception, is required by January 1, 2012. In order to accomplish these strategic and mandatory initiatives successfully and simultaneously, healthcare organizations will require significant and thoughtful planning, prioritization and execution.

  3. Health and nutrition content claims on Australian fast-food websites.

    PubMed

    Wellard, Lyndal; Koukoumas, Alexandra; Watson, Wendy L; Hughes, Clare

    2017-03-01

    To determine the extent that Australian fast-food websites contain nutrition content and health claims, and whether these claims are compliant with the new provisions of the Australia New Zealand Food Standards Code ('the Code'). Systematic content analysis of all web pages to identify nutrition content and health claims. Nutrition information panels were used to determine whether products with claims met Nutrient Profiling Scoring Criteria (NPSC) and qualifying criteria, and to compare them with the Code to determine compliance. Australian websites of forty-four fast-food chains including meals, bakery, ice cream, beverage and salad chains. Any products marketed on the websites using health or nutrition content claims. Of the forty-four fast-food websites, twenty (45 %) had at least one claim. A total of 2094 claims were identified on 371 products, including 1515 nutrition content (72 %) and 579 health claims (28 %). Five fast-food products with health (5 %) and 157 products with nutrition content claims (43 %) did not meet the requirements of the Code to allow them to carry such claims. New provisions in the Code came into effect in January 2016 after a 3-year transition. Food regulatory agencies should review fast-food websites to ensure compliance with the qualifying criteria for nutrition content and health claim regulations. This would prevent consumers from viewing unhealthy foods as healthier choices. Healthy choices could be facilitated by applying NPSC to nutrition content claims. Fast-food chains should be educated on the requirements of the Code regarding claims.

  4. Building a Better Trojan Horse: Emerging Army Roles in Joint Urban Operations

    DTIC Science & Technology

    2001-01-01

    Building a Better Trojan Horse : Emerging Army Roles in Joint Urban Operations A Monograph by MAJ Christopher H. Beckert Infantry, U.S. Army School...xx-xx-2000 to xx-xx-2000 5a. CONTRACT NUMBER 5b. GRANT NUMBER 4. TITLE AND SUBTITLE Building a Better Trojan Horse : Emerging Army Roles in Joint...TELEPHONE NUMBER International Area Code Area Code Telephone Number 703 767-9007 DSN 427-9007 2 Abstract BUILDING A BETTER TROJAN HORSE : EMERGING ARMY

  5. 14 CFR 257.6 - Effective and compliance dates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the selling carrier is not the transporting carrier and (ii) Of the transporting carrier's identity... transportation involving a code-share arrangement of the transporting carrier's corporate name and any other name...

  6. 14 CFR 257.6 - Effective and compliance dates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... the selling carrier is not the transporting carrier and (ii) Of the transporting carrier's identity... transportation involving a code-share arrangement of the transporting carrier's corporate name and any other name...

  7. 14 CFR 257.6 - Effective and compliance dates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... the selling carrier is not the transporting carrier and (ii) Of the transporting carrier's identity... transportation involving a code-share arrangement of the transporting carrier's corporate name and any other name...

  8. 14 CFR 257.6 - Effective and compliance dates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... the selling carrier is not the transporting carrier and (ii) Of the transporting carrier's identity... transportation involving a code-share arrangement of the transporting carrier's corporate name and any other name...

  9. 40 CFR Table 3 to Subpart Fffff of... - Continuous Compliance With Emission and Opacity Limits

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Integrated Iron and Steel Manufacturing Facilities Pt. 63, Subpt. FFFFF, Table 3 Table 3 to Subpart FFFFF of... of secondary emissions that exit any opening in the building or structure housing the discharge end... of secondary emissions that exit any opening in the building or structure housing the discharge end...

  10. 40 CFR Table 3 to Subpart Fffff of... - Continuous Compliance With Emission and Opacity Limits

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Integrated Iron and Steel Manufacturing Facilities Pt. 63, Subpt. FFFFF, Table 3 Table 3 to Subpart FFFFF of... of secondary emissions that exit any opening in the building or structure housing the discharge end... of secondary emissions that exit any opening in the building or structure housing the discharge end...

  11. 40 CFR Table 3 to Subpart Fffff of... - Continuous Compliance With Emission and Opacity Limits

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Iron and Steel Manufacturing Facilities Pt. 63, Subpt. FFFFF, Table 3 Table 3 to Subpart FFFFF of Part... of secondary emissions that exit any opening in the building or structure housing the discharge end... of secondary emissions that exit any opening in the building or structure housing the discharge end...

  12. 40 CFR Table 3 to Subpart Fffff of... - Continuous Compliance With Emission and Opacity Limits

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Integrated Iron and Steel Manufacturing Facilities Pt. 63, Subpt. FFFFF, Table 3 Table 3 to Subpart FFFFF of... of secondary emissions that exit any opening in the building or structure housing the discharge end... of secondary emissions that exit any opening in the building or structure housing the discharge end...

  13. 40 CFR Table 3 to Subpart Fffff of... - Continuous Compliance With Emission and Opacity Limits

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Integrated Iron and Steel Manufacturing Facilities Pt. 63, Subpt. FFFFF, Table 3 Table 3 to Subpart FFFFF of... of secondary emissions that exit any opening in the building or structure housing the discharge end... of secondary emissions that exit any opening in the building or structure housing the discharge end...

  14. Construction Sector (NAICS 23)

    EPA Pesticide Factsheets

    Find environmental regulatory information for the construction sector, including the construction of buildings or engineering projects. This includes RCRA information for hazardous waste, refrigeration compliance, asbestos, effluent guidelines & lead laws

  15. Service Contract Compliance Management in Business Process Management

    NASA Astrophysics Data System (ADS)

    El Kharbili, Marwane; Pulvermueller, Elke

    Compliance management is a critical concern for corporations, required to respect contracts. This concern is particularly relevant in the context of business process management (BPM) as this paradigm is getting adopted more widely for-designing and building IT systems. Enforcing contractual compliance needs to be modeled at different levels of a BPM framework, which also includes the service layer. In this paper, we discuss requirements and methods for modeling contractual compliance for an SOA-supported BPM. We also show how business rule management integrated into an industry BPM tool allows modeling and processing functional and non-functional-property constraints which may be extracted from business process contracts. This work proposes a framework that responds to the requirements identified and proposes an architecture implementing it. Our approach is also illustrated by an example.

  16. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Idaho

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mendon, Vrushali V.; Zhao, Mingjie; Taylor, Zachary T.

    The 2015 IECC provides cost-effective savings for residential buildings in Idaho. Moving to the 2015 IECC from the 2015 Idaho State Code base code is cost-effective for residential buildings in all climate zones in Idaho.

  17. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Montana

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mendon, Vrushali V.; Zhao, Mingjie; Taylor, Zachary T.

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Montana. Moving to the 2015 IECC from the 2014 Montana State Code base code is cost-effective for residential buildings in all climate zones in Montana.

  18. 75 FR 20833 - Building Energy Codes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-21

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy [Docket No. EERE-2010-BT-BC-0012] Building Energy Codes AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Request for Information. SUMMARY: The U.S. Department of Energy (DOE) is soliciting...

  19. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Iowa

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mendon, Vrushali V.; Zhao, Mingjie; Taylor, Zachary T.

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Iowa. Moving to the 2015 IECC from the 2014 Iowa State Code base code is cost-effective for residential buildings in all climate zones in Iowa.

  20. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Utah

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mendon, Vrushali V.; Zhao, Mingjie; Taylor, Zachary T.

    The 2015 IECC provides cost-effective savings for residential buildings in Utah. Moving to the 2015 IECC from the 2012 Utah State Code base code is cost-effective for residential buildings in all climate zones in Utah.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top