Possibilities of Use of UAVS for Technical Inspection of Buildings and Constructions

NASA Astrophysics Data System (ADS)

Banaszek, Anna; Banaszek, Sebastian; Cellmer, Anna

2017-12-01

In recent years, Unmanned Aerial Vehicles (UAVs) have been used in various sectors of the economy. This is due to the development of new technologies for acquiring and processing geospatial data. The paper presents the results of experiments using UAV, equipped with a high resolution digital camera, for a visual assessment of the technical condition of the building roof and for the inventory of energy infrastructure and its surroundings. The usefulness of digital images obtained from the UAV deck is presented in concrete examples. The use of UAV offers new opportunities in the area of technical inspection due to the detail and accuracy of the data, low operating costs and fast data acquisition.

KSC-06pd0396

NASA Image and Video Library

2006-03-01

KENNEDY SPACE CENTER, FLA. - The Operations Support Building II at NASA's Kennedy Space Center is seen here, newly built and landscaped. The building replaced modular housing and trailers in the Launch Complex 39 area. The five-story, 189,000-square-foot building consists of approximately 860 office spaces, training rooms, computer rooms, multimedia conference rooms, technical libraries, and a 352-person mission conference center with observation deck. Photo credit: Cory Huston

76 FR 61346 - Sunshine Act Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-04

... defense nuclear facilities, including the Chemistry and Metallurgy Research Building, Area G in Technical... the integration of safety-in-design for the Chemistry and Metallurgy Research Replacement project, the...

KSC-06pd0545

NASA Image and Video Library

2006-03-24

KENNEDY SPACE CENTER, FLA. -- Kennedy Space Center Deputy Director Bill Parsons explains the significance of the Operations Support Building II (behind him) to guests at the ribbon-cutting ceremony. The Operations Support Building II is an Agency safety and health initiative project to replace 198,466 square feet of substandard modular housing and trailers in the Launch Complex 39 area at Kennedy Space Center. The five-story building, which sits south of the Vehicle Assembly Building and faces the launch pads, includes 960 office spaces, 16 training rooms, computer and multimedia conference rooms, a Mission Conference Center with an observation deck, technical libraries, an Exchange store, storage, break areas, and parking. Photo credit: NASA/George Shelton

Treatment of Chlorinated Solvents in Groundwater Beneath an Occupied Building at the Young-Rainey STAR Center, Pinellas, FL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniel, Joe; Surovchak, Scott; Tabor, Charles

Groundwater contamination, consisting of two dissolved-phase plumes originating from chlorinated solvent source areas, in the southeastern portion of the Young- Rainey Star Center (also known as the Pinellas County, Florida, Site) in Largo, Florida, has migrated beyond the property boundary, beneath the roadways, and beneath adjacent properties to the south and east. Groundwater contamination will persist as long as the onsite contaminant source remains. The origin of the contamination appears to be multiple long-term point sources beneath Building 100, a 4.5 ha (11 acre) building that housed manufacturing facilities during US DOE operations at the site. The site is nowmore » owned by Pinellas County, and most of the space inside the building is leased to private companies, so DOE chose not to conduct characterization or remediation through the floor of the building, instead choosing to conduct all work from outside the building. Injection of emulsified soybean oil and a microbial culture has been used at other areas of the site to accelerate naturally occurring bacterial processes that degrade groundwater contaminants to harmless compounds, and that same approach was chosen for this task. The technical approach consisted of installing horizontal wells from outside the building footprint, extending through and around the identified subsurface treatment areas, and terminating beneath the building. Two 107 m (350 ft) long wells, two 122 m (400 ft) long wells, and four 137 m (450 ft) long wells have been installed to intersect the inferred source areas and confirmed contaminant plumes beneath the building. DOE then injected emulsified vegetable oil and a microbial culture into the horizontal wells at each of several target areas beneath the building where the highest groundwater contaminant concentrations have been detected. The target areas are the northwest corner of the building between the old drum storage pad locations and monitoring well PIN12-S35B, the vicinity of former monitoring well PIN12-S57B, and hydraulically upgradient from the south plume and the east plume at the points where they exit from beneath the building. We describe the details of designing and constructing horizontal injection wells for bioremediation beneath a large, occupied industrial production facility, including lessons learned; technical, logistical, and environmental challenges; community relations; and regulatory relations. Because of the expected lag in biological acclimation and response, distance between the treatment areas and associated monitoring points, and low groundwater velocity, it will likely be years before the full impact of the project will be realized.« less

B-WEST Regional Workforce Training Center. Building Workers Entering Skilled Trades. Employer Training Guide.

ERIC Educational Resources Information Center

Portland Community Coll., OR.

This guide, which was developed during the B-WEST (Building Workers Entering Skilled Trades) project, includes materials for use in training and providing on-site consultations to contractors, managers, supervisors, office/technical staff, and others in two areas: diversity in the workplace and sexual harassment in the workplace. Part 1, which…

Building Capacity for Protected Area Management in Lao PDR

NASA Astrophysics Data System (ADS)

Rao, Madhu; Johnson, Arlyne; Spence, Kelly; Sypasong, Ahnsany; Bynum, Nora; Sterling, Eleanor; Phimminith, Thavy; Praxaysombath, Bounthob

2014-04-01

Declining biodiversity in protected areas in Laos is attributed to unsustainable exploitation of natural resources. At a basic level, an important need is to develop capacity in academic and professional training institutions to provide relevant training to conservation professionals. The paper (a) describes the capacity building approach undertaken to achieve this goal, (b) evaluates the effectiveness of the approach in building capacity for implementing conservation and (c) reviews implementation outcomes. Strong linkages between organizations implementing field conservation, professional training institutions, and relevant Government agencies are central to enhancing effectiveness of capacity building initiatives aimed at improving the practice of conservation. Protected area management technical capacity needs will need to directly influence curriculum design to insure both relevance and effectiveness of training in improving protected area management. Sustainability of capacity building initiatives is largely dependent on the level of interest and commitment by host-country institutions within a supportive Government policy framework in addition to engagement of organizations implementing conservation.

Building capacity for protected area management in Lao PDR.

PubMed

Rao, Madhu; Johnson, Arlyne; Spence, Kelly; Sypasong, Ahnsany; Bynum, Nora; Sterling, Eleanor; Phimminith, Thavy; Praxaysombath, Bounthob

2014-04-01

Declining biodiversity in protected areas in Laos is attributed to unsustainable exploitation of natural resources. At a basic level, an important need is to develop capacity in academic and professional training institutions to provide relevant training to conservation professionals. The paper (a) describes the capacity building approach undertaken to achieve this goal, (b) evaluates the effectiveness of the approach in building capacity for implementing conservation and (c) reviews implementation outcomes. Strong linkages between organizations implementing field conservation, professional training institutions, and relevant Government agencies are central to enhancing effectiveness of capacity building initiatives aimed at improving the practice of conservation. Protected area management technical capacity needs will need to directly influence curriculum design to insure both relevance and effectiveness of training in improving protected area management. Sustainability of capacity building initiatives is largely dependent on the level of interest and commitment by host-country institutions within a supportive Government policy framework in addition to engagement of organizations implementing conservation.

Estimating rooftop solar technical potential across the US using a combination of GIS-based methods, lidar data, and statistical modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gagnon, Pieter; Margolis, Robert; Melius, Jennifer

We provide a detailed estimate of the technical potential of rooftop solar photovoltaic (PV) electricity generation throughout the contiguous United States. This national estimate is based on an analysis of select US cities that combines light detection and ranging (lidar) data with a validated analytical method for determining rooftop PV suitability employing geographic information systems. We use statistical models to extend this analysis to estimate the quantity and characteristics of roofs in areas not covered by lidar data. Finally, we model PV generation for all rooftops to yield technical potential estimates. At the national level, 8.13 billion m 2 ofmore » suitable roof area could host 1118 GW of PV capacity, generating 1432 TWh of electricity per year. This would equate to 38.6% of the electricity that was sold in the contiguous United States in 2013. This estimate is substantially higher than a previous estimate made by the National Renewable Energy Laboratory. The difference can be attributed to increases in PV module power density, improved estimation of building suitability, higher estimates of total number of buildings, and improvements in PV performance simulation tools that previously tended to underestimate productivity. Also notable, the nationwide percentage of buildings suitable for at least some PV deployment is high—82% for buildings smaller than 5000 ft 2 and over 99% for buildings larger than that. In most states, rooftop PV could enable small, mostly residential buildings to offset the majority of average household electricity consumption. Even in some states with a relatively poor solar resource, such as those in the Northeast, the residential sector has the potential to offset around 100% of its total electricity consumption with rooftop PV.« less

Estimating rooftop solar technical potential across the US using a combination of GIS-based methods, lidar data, and statistical modeling

DOE PAGES

Gagnon, Pieter; Margolis, Robert; Melius, Jennifer; ...

2018-01-05

We provide a detailed estimate of the technical potential of rooftop solar photovoltaic (PV) electricity generation throughout the contiguous United States. This national estimate is based on an analysis of select US cities that combines light detection and ranging (lidar) data with a validated analytical method for determining rooftop PV suitability employing geographic information systems. We use statistical models to extend this analysis to estimate the quantity and characteristics of roofs in areas not covered by lidar data. Finally, we model PV generation for all rooftops to yield technical potential estimates. At the national level, 8.13 billion m 2 ofmore » suitable roof area could host 1118 GW of PV capacity, generating 1432 TWh of electricity per year. This would equate to 38.6% of the electricity that was sold in the contiguous United States in 2013. This estimate is substantially higher than a previous estimate made by the National Renewable Energy Laboratory. The difference can be attributed to increases in PV module power density, improved estimation of building suitability, higher estimates of total number of buildings, and improvements in PV performance simulation tools that previously tended to underestimate productivity. Also notable, the nationwide percentage of buildings suitable for at least some PV deployment is high—82% for buildings smaller than 5000 ft 2 and over 99% for buildings larger than that. In most states, rooftop PV could enable small, mostly residential buildings to offset the majority of average household electricity consumption. Even in some states with a relatively poor solar resource, such as those in the Northeast, the residential sector has the potential to offset around 100% of its total electricity consumption with rooftop PV.« less

Estimating rooftop solar technical potential across the US using a combination of GIS-based methods, lidar data, and statistical modeling

NASA Astrophysics Data System (ADS)

Gagnon, Pieter; Margolis, Robert; Melius, Jennifer; Phillips, Caleb; Elmore, Ryan

2018-02-01

We provide a detailed estimate of the technical potential of rooftop solar photovoltaic (PV) electricity generation throughout the contiguous United States. This national estimate is based on an analysis of select US cities that combines light detection and ranging (lidar) data with a validated analytical method for determining rooftop PV suitability employing geographic information systems. We use statistical models to extend this analysis to estimate the quantity and characteristics of roofs in areas not covered by lidar data. Finally, we model PV generation for all rooftops to yield technical potential estimates. At the national level, 8.13 billion m2 of suitable roof area could host 1118 GW of PV capacity, generating 1432 TWh of electricity per year. This would equate to 38.6% of the electricity that was sold in the contiguous United States in 2013. This estimate is substantially higher than a previous estimate made by the National Renewable Energy Laboratory. The difference can be attributed to increases in PV module power density, improved estimation of building suitability, higher estimates of total number of buildings, and improvements in PV performance simulation tools that previously tended to underestimate productivity. Also notable, the nationwide percentage of buildings suitable for at least some PV deployment is high—82% for buildings smaller than 5000 ft2 and over 99% for buildings larger than that. In most states, rooftop PV could enable small, mostly residential buildings to offset the majority of average household electricity consumption. Even in some states with a relatively poor solar resource, such as those in the Northeast, the residential sector has the potential to offset around 100% of its total electricity consumption with rooftop PV.

Technical Report for the Demonstration of Wide Area ...

EPA Pesticide Factsheets

Report The U.S. Environmental Protection Agency in collaboration with the Department of Homeland Security conducted the “Wide-Area Urban Radiological Contaminant, Mitigation, and Cleanup Technology Demonstration” in Columbus, Ohio on June 22-25, 2015. Five wide-area radiological decontamination technologies (including strippable coatings, gels, and chemical foam technologies) were demonstrated on an urban building.

Complex assessment of urban housing energy sustainability

NASA Astrophysics Data System (ADS)

Popova, Olga; Glebova, Julia; Karakozova, Irina

2018-03-01

The article presents the results of a complex experimental-analytical research of residential development energy parameters - survey of construction sites and determination of calculated energy parameters (resistance to heat transfer) considering their technical condition. The authors suggest a methodology for assessing residential development energy parameters on the basis of construction project's structural analysis with the use of advanced intelligent collection systems, processing (self-organizing maps - SOM) and data visualization (geo-informational systems - GIS). SOM clustering permitted to divide the housing stock (on the example of Arkhangelsk city) into groups with similar technical-operational and energy parameters. It is also possible to measure energy parameters of construction project of each cluster by comparing them with reference (normative) measures and also with each other. The authors propose mechanisms for increasing the area's energy stability level by implementing a set of reproduction activities for residential development of various groups. The analysis showed that modern multilevel and high-rise construction buildings have the least heat losses. At present, however, ow-rise wood buildings is the dominant styles of buildings of Arkhangelsk city. Data visualisation on the created heat map showed that such housing stock covers the largest urban area. The development strategies for depressed areas is in a high-rise building, which show the economic, social and environmental benefits of upward growth of the city. An urban regeneration programme for severely rundown urban housing estates is in a high-rise construction building, which show the economic, social and environmental benefits of upward growth of the city.

Understanding Energy Code Acceptance within the Alaska Building Community

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mapes, Terry S.

2012-02-14

This document presents the technical assistance provided to the Alaska Home Financing Corporation on behalf of PNNL regarding the assessment of attitudes toward energy codes within the building community in Alaska. It includes a summary of the existing situation and specific assistance requested by AHFC, the results of a questionnaire designed for builders surveyed in a suburban area of Anchorage, interviews with a lender, a building official, and a research specialist, and recommendations for future action by AHFC.

KSC-06pd0546

NASA Image and Video Library

2006-03-24

KENNEDY SPACE CENTER, FLA. -- Scott Kerr, director of Engineering Development at Kennedy Space Center, addresses guests at a ribbon-cutting ceremony for the Operations Support Building II (behind him). He and other key Center personnel and guests attended the significant event. The Operations Support Building II is an Agency safety and health initiative project to replace 198,466 square feet of substandard modular housing and trailers in the Launch Complex 39 area at Kennedy Space Center. The five-story building, which sits south of the Vehicle Assembly Building and faces the launch pads, includes 960 office spaces, 16 training rooms, computer and multimedia conference rooms, a Mission Conference Center with an observation deck, technical libraries, an Exchange store, storage, break areas, and parking. Photo credit: NASA/George Shelton

KSC-06pd0544

NASA Image and Video Library

2006-03-24

KENNEDY SPACE CENTER, FLA. -- Kennedy Space Center Deputy Director Bill Parsons talks to guests at a ribbon-cutting ceremony for the Operations Support Building II (behind him). He and other key Center personnel and guests attended the significant event. The Operations Support Building II is an Agency safety and health initiative project to replace 198,466 square feet of substandard modular housing and trailers in the Launch Complex 39 area at Kennedy Space Center. The five-story building, which sits south of the Vehicle Assembly Building and faces the launch pads, includes 960 office spaces, 16 training rooms, computer and multimedia conference rooms, a Mission Conference Center with an observation deck, technical libraries, an Exchange store, storage, break areas, and parking. Photo credit: NASA/George Shelton

Training and technical assistance to enhance capacity building between prevention research centers and their partners.

PubMed

Spadaro, Antonia J; Grunbaum, Jo Anne; Dawkins, Nicola U; Wright, Demia S; Rubel, Stephanie K; Green, Diane C; Simoes, Eduardo J

2011-05-01

The Centers for Disease Control and Prevention has administered the Prevention Research Centers Program since 1986. We quantified the number and reach of training programs across all centers, determined whether the centers' outcomes varied by characteristics of the academic institution, and explored potential benefits of training and technical assistance for academic researchers and community partners. We characterized how these activities enhanced capacity building within Prevention Research Centers and the community. The program office collected quantitative information on training across all 33 centers via its Internet-based system from April through December 2007. Qualitative data were collected from April through May 2007. We selected 9 centers each for 2 separate, semistructured, telephone interviews, 1 on training and 1 on technical assistance. Across 24 centers, 4,777 people were trained in 99 training programs in fiscal year 2007 (October 1, 2006-September 30, 2007). Nearly 30% of people trained were community members or agency representatives. Training and technical assistance activities provided opportunities to enhance community partners' capacity in areas such as conducting needs assessments and writing grants and to improve the centers' capacity for cultural competency. Both qualitative and quantitative data demonstrated that training and technical assistance activities can foster capacity building and provide a reciprocal venue to support researchers' and the community's research interests. Future evaluation could assess community and public health partners' perception of centers' training programs and technical assistance.

Minimum housing spaces, flexibility and sustainability: a reflection on the basis of ergonomics intervention.

PubMed

Oliveira, Rayssa Cristiane; Elali, Gleice Azambuja

2012-01-01

This article discusses the quality of internal life space in apartments of residential buildings in the northeast region of Brazil, especially the possibility to adapt environments with small areas (according to local building codes) to the needs of different arrangements of families (considering 4 members per family). The research had a gradual approach and used multimethod strategy: (a) studying the universe of residential buildings whose apartment's inner area is between 50 and 60 m2 and were constructed in Natal-RN between 1998 and 2008, as well as not linked to social housing programs and occupied for more than one year; (b) selecting a building to do a Post Occupation Evaluation (POE), using walkthrough, technical observation and questionnaires; (c) choosing of two housing units to do an ergonomic intervention (based in interviews and detailed measurements). The results show the technical possibility to modify the units, but these modifications have a high (social, economic and environmental) price, because in general the space of units projected is not flexible. So, the paper concludes that this type of enterprise needs to be rethought, since part of them is (social and ecologically) unsustainable.

MATC Machine Shop '84: Specific Skill Needs Assessment for Machine Shops in the Milwaukee Area.

ERIC Educational Resources Information Center

Roberts, Keith J.

Building on previous research on the future skill needs of workers in southeastern Wisconsin, a study was conducted at Milwaukee Area Technical College (MATC) to gather information on the machine tool industry in the Milwaukee area. Interviews were conducted by MATC Machine Shop and Tool and Die faculty with representatives from 135 machine shops,…

47 CFR 22.947 - Five year build-out period.

Code of Federal Regulations, 2010 CFR

2010-10-01

... full size map, a reduced map, and an exhibit showing technical data relevant to determination of the system's CGSA. Separate maps must be submitted for each market into which the CGSA extends, showing the extension area in the adjacent market. Maps showing extension areas must be labeled (i.e. marked with the...

Selected Bibliography.

ERIC Educational Resources Information Center

Shirley, Wayne, Comp.

This bibliography lists approximately 1,100 titles of technical and vocational publications in the following areas: Accounting; Agriculture; Air Conditioning and Refrigeration; Aircraft; Architectural and Building Technology; Arts; Automobiles and Diesels; Biography; Body, Health, and Nutrition; Business; Chemistry; Civil Engineering; Computers;…

Technical Potential Assessment for the Renewable Energy Zone (REZ) Process: A GIS-Based Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Nathan; Roberts, Billy J

Geographic Information Systems (GIS)-based energy resource and technical potential assessments identify areas capable of supporting high levels of renewable energy (RE) development as part of a Renewable Energy Zone (REZ) Transmission Planning process. This document expands on the REZ Process to aid practitioners in conducting GIS-based RE resource and technical potential assessments. The REZ process is an approach to plan, approve, and build transmission infrastructure that connects REZs - geographic areas that have high-quality RE resources, suitable topography and land-use designations, and demonstrated developer interest - to the power system. The REZ process helps to increase the share of solarmore » photovoltaic (PV), wind, and other resources while also maintaining reliability and economics.« less

Confronting Regulatory Cost and Quality Expectations. An Exploration of Technical Change in Minimum Efficiency Performance Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, Margaret; Spurlock, C. Anna; Yang, Hung-Chia

The dual purpose of this project was to contribute to basic knowledge about the interaction between regulation and innovation and to inform the cost and benefit expectations related to technical change which are embedded in the rulemaking process of an important area of national regulation. The area of regulation focused on here is minimum efficiency performance standards (MEPS) for appliances and other energy-using products. Relevant both to U.S. climate policy and energy policy for buildings, MEPS remove certain product models from the market that do not meet specified efficiency thresholds.

Study on construction technology of metro tunnel under a glass curtain wall

NASA Astrophysics Data System (ADS)

Zhang, Jian; Yu, Deqiang

2018-03-01

To ensure the safety of the glass curtain wall building above loess tunnel and get an optimal scheme, an elastic-plastic FEM model is established to simulate three reinforcement schemes based on a tunnel section in Xi’an Metro Line 3. The results show that the settlement value of the optimal scheme is reduced by 69.89% compared with the drainage measures, and the uneven settlement value is reduced by 57.5%. The construction points, technical processes and technical indexes of the optimal scheme are introduced. According to the actual project, the cumulative settlement of the building under construction is 16mm, which meets the control standards. According to the actual project, the cumulative settlement of the glass curtain wall building is 16mm, which meets the control standards. The reinforcement scheme can provide some reference for the design and construction of the metro in loess area.

76 FR 33332 - Announcement of Funding Awards for the Technical Assistance and Capacity Building under the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

... of key Departmental objectives, including but not limited to, energy efficiency and green building... Awards for the Technical Assistance and Capacity Building under the Transformation Initiative Program...) for the Technical Assistance and Capacity Building under the Transformation Initiative program for...

Research on precise modeling of buildings based on multi-source data fusion of air to ground

NASA Astrophysics Data System (ADS)

Li, Yongqiang; Niu, Lubiao; Yang, Shasha; Li, Lixue; Zhang, Xitong

2016-03-01

Aims at the accuracy problem of precise modeling of buildings, a test research was conducted based on multi-source data for buildings of the same test area , including top data of air-borne LiDAR, aerial orthophotos, and façade data of vehicle-borne LiDAR. After accurately extracted the top and bottom outlines of building clusters, a series of qualitative and quantitative analysis was carried out for the 2D interval between outlines. Research results provide a reliable accuracy support for precise modeling of buildings of air ground multi-source data fusion, on the same time, discussed some solution for key technical problems.

Technical Options for Energy Conservation in Buildings. National Conference of States on Building Codes and Standards and National Bureau of Standards Joint Emergency Workshop on Energy Conservation in Buildings. (Washington, D.C., June 19, 1973) NBS Technical Note 789.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC. Inst. for Applied Technology.

The purpose of this report is to provide reference material on the technical options for energy conservation in buildings. Actions pertinent to existing buildings and new buildings are considered separately. Regarding existing buildings, principal topics include summer cooling, winter heating, and other energy-related features such as insulation,…

78 FR 66375 - Announcement of Funding Awards for the OneCPD Plus: Technical Assistance and Capacity Building...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-05

... of key Departmental objectives, including but not limited to, energy efficiency and green building... Awards for the OneCPD Plus: Technical Assistance and Capacity Building Under the Transformation... Notice of Funding Availability (NOFA) for the OneCPD Plus: Technical Assistance and Capacity Building...

M-X Environmental Technical Report. Economic Model.

DTIC Science & Technology

1980-12-22

TABLE PAGE C-4. Estimated off base school facility costs. 147 C-5. Estimated development costs to other public facilities. 148 C-6. Estimated utility... development costs. 149 C-7. Estimated non-residential building development . 151 E-1. Adjustments to baseline population projections to account for...the fringes of the rural deployment areas themselves. These metropolitan areas potentially would experience significant indirect employment growth as a

Indoor Radon Concentration Related to Different Radon Areas and Indoor Radon Prediction

NASA Astrophysics Data System (ADS)

Juhásová Šenitková, Ingrid; Šál, Jiří

2017-12-01

Indoor radon has been observed in the buildings at areas with different radon risk potential. Preventive measures are based on control of main potential radon sources (soil gas, building material and supplied water) to avoid building of new houses above recommended indoor radon level 200 Bq/m3. Radon risk (index) estimation of individual building site bedrock in case of new house siting and building protection according technical building code are obligatory. Remedial actions in buildings built at high radon risk areas were carried out principally by unforced ventilation and anti-radon insulation. Significant differences were found in the level of radon concentration between rooms where radon reduction techniques were designed and those where it was not designed. The mathematical model based on radon exhalation from soil has been developed to describe the physical processes determining indoor radon concentration. The model is focused on combined radon diffusion through the slab and advection through the gap from sub-slab soil. In this model, radon emanated from building materials is considered not having a significant contribution to indoor radon concentration. Dimensional analysis and Gauss-Newton nonlinear least squares parametric regression were used to simplify the problem, identify essential input variables and find parameter values. The presented verification case study is introduced for real buildings with respect to various underground construction types. Presented paper gives picture of possible mathematical approach to indoor radon concentration prediction.

FY 2014 LDRD Annual Report Project Summaries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tomchak, Dena

The FY 2014 Laboratory Directed Research and Development (LDRD) Annual Report is a compendium of the diverse research performed to develop and ensure the INL's technical capabilities can support future DOE missions and national research priorities. LDRD is essential to INL - it provides a means for the laboratory to pursue novel scientific and engineering research in areas that are deemed too basic or risky for programmatic investments. This research enahnces technical capabilities at the laboratory, providing scientific and engineering staff with opportunities for skill building and partnership development.

22 CFR 9b.4 - Department of State building press pass for technical crews.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Department of State building press pass for technical crews. 9b.4 Section 9b.4 Foreign Relations DEPARTMENT OF STATE GENERAL REGULATIONS GOVERNING DEPARTMENT OF STATE PRESS BUILDING PASSES § 9b.4 Department of State building press pass for technical crews...

Management/Technical Interaction in Integrated Information System Development.

ERIC Educational Resources Information Center

Bagley, Clarence H.; Gardner, Don E.

The integrated information system element of the management information system concept has practical applications for management in the areas of both information analysis and decision-model building. Four basic options for achieving integration in operational data systems are: a default option, the coordinated file option, the distributed…

British University Libraries 1977-1987: Some Observations on the Challenges of Declining Resources.

ERIC Educational Resources Information Center

Rodger, Elizabeth M.

1988-01-01

Highlights some of the developments in the following areas that have taken place during the period 1977-87 in British university libraries: (1) library resources; (2) automation; (3) collection building; (4) technical services; (5) reader services; (6) management and staffing; and (7) cooperation. (71 references) (MES)

Tribal Child Care Facilities: A Guide to Construction and Renovation.

ERIC Educational Resources Information Center

National Child Care Information Center, Vienna, VA.

This document provides technical assistance in addressing major areas of the child care facility construction and renovation process, including conducting a child care community needs assessment, identifying a site, financing costs, developing a business plan, conducting an environmental assessment, building and designing a facility, and hiring…

Deployment Area Selection and Land Withdrawal/Acquisition. M-X/MPS (M-X/Multiple Protective Shelter) Environmental Technical Report. Economic Model.

DTIC Science & Technology

1981-10-02

Estimated non-residential building development . 176 D-I Correspondence between RIMS sectors and 1974 Census of Agriculture reporting categories. 185 D-2...deployment would be the development of new economic sectors . For example, building an M-X operating N.’ base or DDA facilities in a county would be likely...construction sectors . For the rural Nevada/Utah ROI counties, many of these location quotients are significantly less than one and in many cases zero because

ERTS-1 DCS technical support provided by Wallops Station. [ground truth stations and DCP repair depot

NASA Technical Reports Server (NTRS)

Smith, R.

1975-01-01

Wallops Station accepted the tasks of providing ground truth to several ERTS investigators, operating a DCP repair depot, designing and building an airborne DCP Data Acquisition System, and providing aircraft underflight support for several other investigators. Additionally, the data bank is generally available for use by ERTS and other investigators that have a scientific interest in data pertaining to the Chesapeake Bay area. Working with DCS has provided a means of evaluating the system as a data collection device possibly applicable to ongoing Earth Resources Program activities in the Chesapeake Bay area as well as providing useful data and services to other ERTS investigators. The two areas of technical support provided by Wallops, ground truth stations and repair for DCPs, are briefly discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardin, Dave; Stephan, Eric G.; Wang, Weimin

Through its Building Technologies Office (BTO), the United States Department of Energy’s Office of Energy Efficiency and Renewable Energy (DOE-EERE) is sponsoring an effort to advance interoperability for the integration of intelligent buildings equipment and automation systems, understanding the importance of integration frameworks and product ecosystems to this cause. This is important to BTO’s mission to enhance energy efficiency and save energy for economic and environmental purposes. For connected buildings ecosystems of products and services from various manufacturers to flourish, the ICT aspects of the equipment need to integrate and operate simply and reliably. Within the concepts of interoperability liemore » the specification, development, and certification of equipment with standards-based interfaces that connect and work. Beyond this, a healthy community of stakeholders that contribute to and use interoperability work products must be developed. On May 1, 2014, the DOE convened a technical meeting to take stock of the current state of interoperability of connected equipment and systems in buildings. Several insights from that meeting helped facilitate a draft description of the landscape of interoperability for connected buildings, which focuses mainly on small and medium commercial buildings. This document revises the February 2015 landscape document to address reviewer comments, incorporate important insights from the Buildings Interoperability Vision technical meeting, and capture thoughts from that meeting about the topics to be addressed in a buildings interoperability vision. In particular, greater attention is paid to the state of information modeling in buildings and the great potential for near-term benefits in this area from progress and community alignment.« less

Within compound, from Guard Tower (Building 5762), looking southwest, Technical ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Within compound, from Guard Tower (Building 5762), looking southwest, Technical Equipment Building (Building 5760) to left, Microwave Tower (associated with Building 5769) and Civil Engineering Storage Building (Building 5766) to left - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

The net benefit of public expenditures on avalanche defence structures in the municipality of Davos, Switzerland

NASA Astrophysics Data System (ADS)

Fuchs, S.; McAlpin, M. C.

2005-04-01

Avalanches pose a threat to settlements as well as industrial and recreational areas in the Alps. As a counter measure, technical mitigation measures have been implemented since the 19th century, resulting in a raise in value of formerly endangered areas. This increase in value can be considered as a benefit due to prevented damage. This paper compares the total costs and benefits of technical mitigation measures in the municipality of Davos, Switzerland as a basis for evaluating their net social benefit. The benefit of avalanche defence structures is determined using two different approaches. First, the replacement value of buildings protected by mitigation measures is quantified. Second, the number of protected persons is monetarily assessed by means of a human capital approach. The quantified benefit is compared with the present value of cumulative capital expenditures on avalanche mitigation measures. In addition, distributional effects of the public expenditures on technical mitigation measures are discussed based on the average future tax revenues within protected areas. Depending on whether benefits are calculated in terms of protected buildings or protected persons, the results show a large range of cost-benefit ratios. Critical issues of cost-benefit analyses in the context of alpine natural hazards are highlighted, including problems related to the human capital approach and the sensitivity of results to how benefits are calculated. The applicability of cost-benefit analyses for evaluating avalanche mitigation measures is discussed.

Technical cooperation on nuclear security between the United States and China : review of the past and opportunities for the future.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pregenzer, Arian Leigh

2011-12-01

The United States and China are committed to cooperation to address the challenges of the next century. Technical cooperation, building on a long tradition of technical exchange between the two countries, can play an important role. This paper focuses on technical cooperation between the United States and China in the areas of nonproliferation, arms control and other nuclear security topics. It reviews cooperation during the 1990s on nonproliferation and arms control under the U.S.-China Arms Control Exchange, discusses examples of ongoing activities under the Peaceful Uses of Technology Agreement to enhance security of nuclear and radiological material, and suggests opportunitiesmore » for expanding technical cooperation between the defense nuclear laboratories of both countries to address a broader range of nuclear security topics.« less

Building stones and geological environment in three ancient cities of Aegean Thrace, Greece

NASA Astrophysics Data System (ADS)

Xidakis, G. S.; Diamantis, J. V.; Marinos, P. G.

1990-07-01

The type, use, and size of the structural stones employed in three ancient cities of the Aegean Thrace are considered Abdera, Maroneia, and Mesimbria. The impact of the geological environment on the choice of these materials also is examined. From the results obtained it is implied that despite the great variety of rocks exposed in the area, the rocks used in construction in these cities are mostly types of sandstone and limestone, rocks with moderate technical properties and easily obtained from the area. The quarries were within a radius of less than 10 km and the size distribution of the building stones in all towns is discussed.

Laboratory Directed Research and Development FY-10 Annual Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dena Tomchak

2011-03-01

The FY 2010 Laboratory Directed Research and Development (LDRD) Annual Report is a compendium of the diverse research performed to develop and ensure the INL's technical capabilities can support the future DOE missions and national research priorities. LDRD is essential to the INL -- it provides a means for the laboratory to pursue novel scientific and engineering research in areas that are deemed too basic or risky for programmatic investments. This research enhances technical capabilities at the laboratory, providing scientific and engineering staff with opportunities for skill building and partnership development.

Coal mine subsidence: proceedings from a citizen's conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mavrolas, P.; Schechtman, M.

A lay summary of coal-mine subsidence presents non-technical information for people in Illinois' subsidence-prone areas, and describes state and national assistance programs. The report explains mining methods and the effects of subsidence on buildings and farmland. It tells what to do in the event of an emergency and how to buy a home in a questionable area. The five appendices include directories to state and federal agencies. 14 figures, 1 table. (DCK)

78 FR 46546 - Design-Build Contracting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

...-0043] RIN 2125-AF58 Design-Build Contracting AGENCY: Federal Highway Administration (FHWA), DOT. ACTION... alternative technical concepts (ATC) in design-build project delivery of highway construction. The revisions... design-build proposers to submit ATCs in their technical and price proposals. The FHWA seeks comments on...

47 CFR 22.383 - In-building radiation systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false In-building radiation systems. 22.383 Section... MOBILE SERVICES Operational and Technical Requirements Technical Requirements § 22.383 In-building radiation systems. Licensees may install and operate in-building radiation systems without applying for...

Assigning a Thesis Project In the Two-Year Architectural Technology Program

ERIC Educational Resources Information Center

Obermeyer, Thomas

1977-01-01

The "thesis project" assigned in the sixth quarter of the eight-quarter architectural technology program at the Dakota County Area Vocational-Technical Institute in Rosemont, Minnesota, requires the students to design a building for a local public service organization or government agency. The complete project will include a program, a…

KSC-06pd0547

NASA Image and Video Library

2006-03-24

KENNEDY SPACE CENTER, FLA. -- With the ribbon-cutting ceremony, the new Operations Support Building II is officially in business. Participating in the event are (left to right) Aris Garcia, vice president of the architecture firm Wolfgang Alvarez; Mark Nappi, associate program manager of Ground Operations for United Space Alliance; Donald Minderman, NASA project manager; Scott Kerr, director of Engineering Development at Kennedy; Bill Parsons, deputy director of Kennedy Space Center; Miguel Morales, with NASA Engineering Development; Mike Wetmore, director of Shuttle Processing; and Tim Clancy, president of the construction firm Clancy & Theys. The Operations Support Building II is an Agency safety and health initiative project to replace 198,466 square feet of substandard modular housing and trailers in the Launch Complex 39 area at Kennedy Space Center. The five-story building, which sits south of the Vehicle Assembly Building and faces the launch pads, includes 960 office spaces, 16 training rooms, computer and multimedia conference rooms, a Mission Conference Center with an observation deck, technical libraries, an Exchange store, storage, break areas, and parking. Photo credit: NASA/George Shelton

Technical Highlight: NREL Improves Building Energy Simulation Programs Through Diagnostic Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Polly, B.

2012-01-09

This technical highlight describes NREL research to develop Building Energy Simulation Test for Existing Homes (BESTEST-EX) to increase the quality and accuracy of energy analysis tools for the building retrofit market.

Separation of Prior-Service Reentrants in the U.S. (United States) Navy: A Preliminary Analysis.

DTIC Science & Technology

1983-04-01

AND ADDRESS 10. PROGRAM ELEMENT. PROJECT, TASK ’ Institute for Policy Research and Evaluation AREA & WORK UNIT NUMBERS N-253 Burrowes Building, PSU...enlistment a Percent of area reentrants in each district - . . - • . .. .. p. . ia OTHER TECHNICAL REPORTS OF TIllS PROJECTa As part of the project...bOffie of Naval Research Contract No. N00014-82-K-0262. • . . . . Distribution List Director Technology Programs Office of Naval Research (Code 200

An image, looking east into Room 112A, filled with technical ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

An image, looking east into Room 112A, filled with technical equipment pertinent to the building's recent use - Department of Energy, Mound Facility, Electronics Laboratory Building (E Building), One Mound Road, Miamisburg, Montgomery County, OH

Sampling and analysis plan for assessment of beryllium in soils surrounding TA-40 building 15

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruedig, Elizabeth

Technical Area (TA) 40 Building 15 (40-15) is an active firing site at Los Alamos National Laboratory. The weapons facility operations (WFO) group plans to build an enclosure over the site in 2017, so that test shots may be conducted year-round. The enclosure project is described in PRID 16P-0209. 40-15 is listed on LANL OSH-ISH’s beryllium inventory, which reflects the potential for beryllium in/on soils and building surfaces at 40-15. Some areas in and around 40-15 have previously been sampled for beryllium, but past sampling efforts did not achieve complete spatial coverage of the area. This Sampling and Analysis Planmore » (SAP) investigates the area surrounding 40-15 via 9 deep (≥1-ft.) soil samples and 11 shallow (6-in.) soil samples. These samples will fill the spatial data gaps for beryllium at 40-15, and will be used to support OSH-ISH’s final determination of 40-15’s beryllium registry status. This SAP has been prepared by the Environmental Health Physics program in consultation with the Industrial Hygiene program. Industrial Hygiene is the owner of LANL’s beryllium program, and will make a final determination with regard to the regulatory status of beryllium at 40-15.« less

LAFD: TA-55 RLUOB/CUB Facility Familiarization Tour, OJT #55265

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rutherford, Victor Stephen

2017-09-14

Los Alamos National Laboratory (LANL) conducts familiarization tours for personnel of the Los Alamos County Fire Department (LAFD) at the RLUOB/CUB, technical area (TA)-55, 400/440, facility, Radiological Laboratory Utility Office Building (RLUOB)/Central Utility Building (CUB). These familiarization tours are official LANL business; the purpose of these tours is to orient LAFD firefighters to the facility so that they can respond efficiently and quickly to a variety of emergency situations. This orientation includes, among other topics, the ingress and egress of the area and buildings, layout and organization of the facility, evacuation procedures and assembly points, and areas of concern withinmore » the various buildings at the facility. LAFD firefighters have the skills and abilities to perform firefighting operations and other emergency response tasks that cannot be provided by other LANL personnel who have the required clearance level. This handout provides details of the information, along with maps and diagrams, to be presented during the familiarization tours. The handout is distributed to the trainees at the time of the tour; a corresponding checklist is also used as guidance during the familiarization tours to ensure that all required information is presented to LAFD personnel.« less

One School's Approach to No Child Left Behind

ERIC Educational Resources Information Center

Shibley, Ivan A.

2005-01-01

The NO VACANCY sign has been hanging out at the Columbia-Montour Area Vocational-Technical School (CMAVTS) for the past several years. A variety of reasons may have contributed to the building being at full capacity. A new administrative director, Steve Walk, was hired in 1999 to change the image of the school. Since his arrival, High Schools That…

Mission Engineering Competencies Technical Report

DTIC Science & Technology

2018-04-30

generate a mission capability. Note that foundational skills – e.g. math , natural or social sciences, general engineering skills - are not listed in...basic understanding of math , sciences, and the fundamentals of engineering are assumed, the foundational building block for mission...April 30, 2018 69 The Helix model focuses on 6 proficiency areas (Hutchison et al. 2018): 1. Math /Science/General

Computer graphics in architecture and engineering

NASA Technical Reports Server (NTRS)

Greenberg, D. P.

1975-01-01

The present status of the application of computer graphics to the building profession or architecture and its relationship to other scientific and technical areas were discussed. It was explained that, due to the fragmented nature of architecture and building activities (in contrast to the aerospace industry), a comprehensive, economic utilization of computer graphics in this area is not practical and its true potential cannot now be realized due to the present inability of architects and structural, mechanical, and site engineers to rely on a common data base. Future emphasis will therefore have to be placed on a vertical integration of the construction process and effective use of a three-dimensional data base, rather than on waiting for any technological breakthrough in interactive computing.

Building America Industrialized Housing Partnership (BAIHP II)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abernethy, Bob; Chandra, Subrato; Baden, Steven

2010-11-30

This report summarizes the work conducted by the Building America Industrialized Housing Partnership (BAIHP - www.baihp.org) during the final budget period (BP5) of our contract, January 1, 2010 to November 30, 2010. Highlights from the four previous budget periods are included for context. BAIHP is led by the Florida Solar Energy Center (FSEC) of the University of Central Florida. With over 50 Industry Partners including factory and site builders, work in BP5 was performed in six tasks areas: Building America System Research Management, Documentation and Technical Support; System Performance Evaluations; Prototype House Evaluations; Initial Community Scale Evaluations; Project Closeout, Finalmore » Review of BA Communities; and Other Research Activities.« less

10 CFR 455.131 - State ranking of grant applications.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) For technical assistance programs, buildings shall be ranked in descending priority based upon the... all buildings covered by eligible applications for: (1) Technical assistance programs for units of local government and public care institutions and (2) Technical assistance programs for schools and...

TECHNICAL BASIS FOR A CANDIDATE BUILDING MATERIALS RADIUM STANDARD

EPA Science Inventory

The report summarizes the technical basis for a candidate building materials radium standard. It contains the standard and a summary of the technical basis for the standard. (NOTE: The Florida Radon Research Program (FRRP), sponsored by the Environmental Protection Agency and the...

Commercial Building Energy Asset Score Program Overview and Technical Protocol (Version 1.1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Na; Goel, Supriya; Makhmalbaf, Atefe

The U.S. Department of Energy (DOE) is developing a voluntary national scoring system for commercial buildings to help building owners and managers assess a building’s energy-related systems independent of operations. The goal of the score is to facilitate cost-effective investment in energy efficiency improvements of commercial buildings. The system, known as the Commercial Building Energy Asset Score, will allow building owners and managers to compare their building infrastructure against peers and track building upgrades over time. The system will also help other building stakeholders (e.g., building investors, tenants, financiers, and appraisers) understand the relative efficiency of different buildings in amore » way that is independent from operations and occupancy. This report outlines the technical protocol used to generate the energy asset score, explains the scoring methodology, and provides additional details regarding the energy asset scoring tool. The alternative methods that were considered prior to developing the current approach are described in the Program Overview and Technical Protocol Version 1.0.« less

Acquisition of background and technical information and class trip planning

NASA Technical Reports Server (NTRS)

Mackinnon, R. M.; Wake, W. H.

1981-01-01

Instructors who are very familiar with a study area, as well as those who are not, find the field trip information acquisition and planning process speeded and made more effective by organizing it in stages. The stage follow a deductive progression: from the associated context region, to the study area, to the specific sample window sites, and from generalized background information on the study region to specific technical data on the environmental and human use systems to be interpreted at each site. On the class trip and in the follow up laboratory, the learning/interpretive process are at first deductive in applying previously learned information and skills to analysis of the study site, then inductive in reading and interpreting the landscape, imagery, and maps of the site, correlating them with information of other samples sites and building valid generalizations about the larger study area, its context region, and other (similar and/or contrasting) regions.

The Geographic Information System techniques impact analyze of Office's Properties in Barcelona

NASA Astrophysics Data System (ADS)

Garcia, P. A.; Biere, R. A.; Moix, M. B.

2007-05-01

The changes in the characteristics and needs in the cities structures means new challenges in the space to the economics activities. The increasing predominance of the tertiary industry, of offices or I+D buildings, like an effect of the economic transformation implies new forms, new technical characteristics and similar alternatives locations accordant with a changing demand. The project that is presented here, is developed by the Centre of Land Policy and Valuations of the University Polytechnic of Catalonia for the company "Servicios de Geo-marketing Inmobiliario S.L.' (SGMI, Real State Geo- marketing Services S.L.) The process consists in the generation of a geographic information system to the analyses of the characteristics office's buildings of Barcelona in the sense to introduce the property office's buildings of Barcelona into a database for the geo-marketing. This application allows the access to the necessary information of technical and constructive characteristics of the office's buildings, summoned by the most emblematic or central locations to the best technical level in their constructions towards facilitating the maximum knowledge the citizen in order to assure the choice according to the needs for every profile of demand. The work has consisted basically in defining the technical criteria of evaluation of the building, to systematize those characteristics in some indicators (variable) capable of expressing the level of quality of every variable, to establish a system measurement of greater to smaller value explained to the quality. Systematizing the collection of information of a total of 683 buildings of Barcelona and of some municipalities of its periphery, through a visit to every building, to process the data obtained to a database and to standardize the value of quality for every indicator and set of indicators towards determining a final qualification, obtained from the different physical, constructive and qualitative characteristics of every studied building. In the study and simulation of certain constructive parameters of the building the factor of location is very relevant, so that when relating the observed products, in their urban position, with the hierarchy agreed on of tertiary axes of the city, determining is possible in which measured the differential characteristics of those products, are adapted or not at the significance level of their urban site, and to determine forms of adequacy of the buildings placed in specific tertiary axes of the city, at the level that corresponds to him. The potency to anticipates the changes in the business models or the possibility to value the location profile, are very important aspects to the study the of the economic activities like an instrument to foresee relevant changes in the location and the level of requirement of technical evolution and services in the properties of biggest centrality. As final result factorial statistical measures that outline criteria of qualitative differentiation among the buildings studied, paying attention to urban areas are established. Competence ranges are determined, with regard to the quality of the buildings in comparable locations, and criteria are extracted about components being the most relevant in the choice and also the most singular.

Involvement of Individuals in the Development of Technical Solutions and Rules of Management for Building Renovation Projects: A Case Study of Latvia

NASA Astrophysics Data System (ADS)

Pukite, I.; Grekis, A.; Geipele, I.; Zeltins, N.

2017-08-01

In March 2016, the Latvian government approved a new support program for increasing energy efficiency in residential apartment buildings. For the support of renovation of apartment buildings in the period from 2016 to 2023, 166 470 588 EUR will be available. Different persons, such as energy auditors, designers, architects, project managers and builders, will be involved in the process of planning, development and implementation of building renovation. At the development stage of the building renovation project, special attention should be devoted to the first stage - energy audit and technical project development. The problem arises due to the fact that each of these individuals, during the development of technical building documentation, does not work as a completely unified system. The implementation of construction project planning and organisational management system is one of the most important factors to guarantee that the quality of building renovation project is ensured in accordance with the laws and regulatory standards. The paper studies mutual cooperation, professionalism and the role of information feedback of personnel involved in the planning stage of building renovation, which is an essential prerequisite for the renovation process in order to achieve high quality of work and reduce the energy performance indicator. The present research includes the analysis of different technical solutions and their impact on energy efficiency. Mutual harmonisation of technical specifications is also investigated.

Hydrazine Blending and Storage Facility, Wastewater Treatment and Decommissioning Assessment. Technical Plan, Version 3.2

DTIC Science & Technology

1988-04-01

o CHEMICAL TREATMENT - CHLORINE (VARIOUS FORMS) AND CHLORINE/ULTRAVIOLET LIGHT (UV) - OZONE AND OZONE/UV - PERMANGANATE - HYDROGEN PEROXIDE AND...and placed in drums, rail cars or trucks (Hazard 3 Abatement Plan, 1982). The existing hydrazine blending facility area is a limited access site which...Area 40’-0" x 26’-0" Volume 44,000 gallons Function Receive wastewater and stormwater runoff m Construction Material Concrete 7. Building 759 Size 40’-0

CCC CAMP WICKIUP – OFFICE BUILDING, CENTER; TECHNICAL SERVICE QUARTERS, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

CCC CAMP WICKIUP – OFFICE BUILDING, CENTER; TECHNICAL SERVICE QUARTERS, RIGHT; EDUCATIONAL BUILDING, LEFT. Photocopy of historic photographs (original photograph on file at National Archives, Rocky Mountain Region, Denver, CO). Unknown USBR Photographer, December 9, 1938 - Wickiup Dam, Deschutes River, La Pine, Deschutes County, OR

The adjustable intelligent atrium sunshade

NASA Astrophysics Data System (ADS)

Ni, Xin; Sun, Jianhua; Wang, Bo

2017-05-01

This article is focused on the specific design techniques of the adjustable atrium sunshade, on the basis of the engineering analyses and practices, it is expected to alter the conventional atrium sunshade design concepts; with its uniqueness and technical excellence, this innovative atrium sunshade system exhibits rich emotions and artistry, creates an inspiring and romantic atmosphere at the atrium area of the building.

The Berry Informational Technology (B.I.T.S.) Student Work Program: An Effective Environment for Collaborative Learning, Leadership, Technological Training, and Certification.

ERIC Educational Resources Information Center

Cornelius, Amy; Macaluso, Paul

The Berry Informational Technology (B.I.T.S.) program at Berry College (Georgia) is an apprenticeship opportunity associated with student work. The program gives students the opportunity to seek technological training in areas, such as building computer systems, trouble-shooting, networking, Web development, and user and technical support. In…

Building Academic Skills in Context: Testing the Value of Enhanced Math Learning in CTE. Pilot Study

ERIC Educational Resources Information Center

Stone, James R., III; Alfeld, Corinne; Pearson, Donna; Lewis, Morgan V.; Jensen, Susan

2005-01-01

This report describes the conduct and outcomes of an experimental pilot study conducted in Spring 2004 to develop and test a model that aimed to enhance career and technical education (CTE) instruction with the mathematics already embedded in the curricula of six occupational areas. Although present in the CTE curriculum, math is largely implicit…

Building America Industrialized Housing Partnership (BAIHP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

McIlvaine, Janet; Chandra, Subrato; Barkaszi, Stephen

This final report summarizes the work conducted by the Building America Industrialized Housing Partnership (www.baihp.org) for the period 9/1/99-6/30/06. BAIHP is led by the Florida Solar Energy Center of the University of Central Florida and focuses on factory built housing. In partnership with over 50 factory and site builders, work was performed in two main areas--research and technical assistance. In the research area--through site visits in over 75 problem homes, we discovered the prime causes of moisture problems in some manufactured homes and our industry partners adopted our solutions to nearly eliminate this vexing problem. Through testing conducted in overmore » two dozen housing factories of six factory builders we documented the value of leak free duct design and construction which was embraced by our industry partners and implemented in all the thousands of homes they built. Through laboratory test facilities and measurements in real homes we documented the merits of 'cool roof' technologies and developed an innovative night sky radiative cooling concept currently being tested. We patented an energy efficient condenser fan design, documented energy efficient home retrofit strategies after hurricane damage, developed improved specifications for federal procurement for future temporary housing, compared the Building America benchmark to HERS Index and IECC 2006, developed a toolkit for improving the accuracy and speed of benchmark calculations, monitored the field performance of over a dozen prototype homes and initiated research on the effectiveness of occupancy feedback in reducing household energy use. In the technical assistance area we provided systems engineering analysis, conducted training, testing and commissioning that have resulted in over 128,000 factory built and over 5,000 site built homes which are saving their owners over $17,000,000 annually in energy bills. These include homes built by Palm Harbor Homes, Fleetwood, Southern Energy Homes, Cavalier and the manufacturers participating in the Northwest Energy Efficient Manufactured Home program. We worked with over two dozen Habitat for Humanity affiliates and helped them build over 700 Energy Star or near Energy Star homes. We have provided technical assistance to several show homes constructed for the International builders show in Orlando, FL and assisted with other prototype homes in cold climates that save 40% over the benchmark reference. In the Gainesville Fl area we have several builders that are consistently producing 15 to 30 homes per month in several subdivisions that meet the 30% benchmark savings goal. We have contributed to the 2006 DOE Joule goals by providing two community case studies meeting the 30% benchmark goal in marine climates.« less

22 CFR 125.4 - Exemptions of general applicability.

Code of Federal Regulations, 2012 CFR

2012-04-01

... boundaries of a “Build-to-Print” data package; (2) Build/Design-to-Specification. “Build/Design-to... THE EXPORT OF TECHNICAL DATA AND CLASSIFIED DEFENSE ARTICLES § 125.4 Exemptions of general applicability. (a) The following exemptions apply to exports of technical data for which approval is not needed...

22 CFR 125.4 - Exemptions of general applicability.

Code of Federal Regulations, 2013 CFR

2013-04-01

... boundaries of a “Build-to-Print” data package; (2) Build/Design-to-Specification. “Build/Design-to... THE EXPORT OF TECHNICAL DATA AND CLASSIFIED DEFENSE ARTICLES § 125.4 Exemptions of general applicability. (a) The following exemptions apply to exports of technical data for which approval is not needed...

22 CFR 125.4 - Exemptions of general applicability.

Code of Federal Regulations, 2011 CFR

2011-04-01

... boundaries of a “Build-to-Print” data package; (2) Build/Design-to-Specification. “Build/Design-to... THE EXPORT OF TECHNICAL DATA AND CLASSIFIED DEFENSE ARTICLES § 125.4 Exemptions of general applicability. (a) The following exemptions apply to exports of technical data for which approval is not needed...

22 CFR 125.4 - Exemptions of general applicability.

Code of Federal Regulations, 2014 CFR

2014-04-01

... boundaries of a “Build-to-Print” data package; (2) Build/Design-to-Specification. “Build/Design-to... THE EXPORT OF TECHNICAL DATA AND CLASSIFIED DEFENSE ARTICLES § 125.4 Exemptions of general applicability. (a) The following exemptions apply to exports of technical data for which approval is not needed...

Spatial Information in Support of 3D Flood Damage Assessment of Buildings at Micro Level: A Review

NASA Astrophysics Data System (ADS)

Amirebrahimi, S.; Rajabifard, A.; Sabri, S.; Mendis, P.

2016-10-01

Floods, as the most common and costliest natural disaster around the globe, have adverse impacts on buildings which are considered as major contributors to the overall economic damage. With emphasis on risk management methods for reducing the risks to structures and people, estimating damage from potential flood events becomes an important task for identifying and implementing the optimal flood risk-reduction solutions. While traditional Flood Damage Assessment (FDA) methods focus on simple representation of buildings for large-scale damage assessment purposes, recent emphasis on buildings' flood resilience resulted in development of a sophisticated method that allows for a detailed and effective damage evaluation at the scale of building and its components. In pursuit of finding the suitable spatial information model to satisfy the needs of implementing such frameworks, this article explores the technical developments for an effective representation of buildings, floods and other required information within the built environment. The search begins with the Geospatial domain and investigates the state-of-the-art and relevant developments from data point of view in this area. It is further extended to other relevant disciplines in the Architecture, Engineering and Construction domain (AEC/FM) and finally, even some overlapping areas between these domains are considered and explored.

Broad Area Cooler Concepts for Cryogenic Propellant Tanks

NASA Technical Reports Server (NTRS)

Christie, R. J.; Tomsik, T. M.; Elchert, J. P.; Guzik, M. C.

2011-01-01

Numerous studies and ground tests have shown that broad area cooling (also known as distributed cooling) can reduce or eliminate cryogenic propellant boil-off and enable long duration storage in space. Various combinations of cryocoolers, circulators, heat exchangers and other hardware could be used to build the system. In this study, several configurations of broad area cooling systems were compared by weighing hardware combinations, input power requirements, component availability, and Technical Readiness Level (TRL). The preferred system has a high TRL and can be scaled up to provide cooling capacities on the order of 150W at 90K

Flood of October 8, 1962, on Bachman Branch and Joes Creek at Dallas, Texas

USGS Publications Warehouse

Ruggles, Frederick H.

1966-01-01

This report presents hydrologic data that enable the user to define areas susceptible to flooding and to evaluate the flood hazard along Bachman Branch and Joes Creek. The data provide a technical basis for making sound decisions concerning the use of flood-plain lands. The report will be useful for preparing building and zoning regulations, locating waste disposal facilities, purchasing unoccupied land, developing recreational areas, and managing surface water in relation to ground-water resources. This is one of the series of reports delineating the flood hazard on streams in the Dallas area.

Assessment of an alternative housing reconstruction policy after the 1995 Grevena-Kozani (N.Greece) earthquake: Construction of standardized units in private lots

NASA Astrophysics Data System (ADS)

Mousteraki, K.; Dandoulaki, M.; Symeonidis, S.

2009-04-01

In Greece, the reconstruction of earthquake damaged building stock is technically and financially supported by the state. Housing reconstruction typically comprises three subsequent phases that is emergency shelter, temporary housing and permanent housing in buildings after their reconstruction. The latter is based on financial support by the state to the owner for the repair or reconstruction of each individual building. A different approach was tried after the 1995 Kozani-Grevena (N.Greece) earthquake. The earthquake (M=6.6) affected mainly the countryside of the two prefectures and devastated a great number of small settlements with aged and decreasing population. The experience from the 1986 Kalamata earthquake had demonstrated that low income and elderly households had difficulties in using reconstruction loans and tented to remain longer in temporary housing. In an attempt to take in the Kalamata experience and the development features of the disaster area, certain categories of homeless households were offered the choice to select either the typical financial and technical support to reconstruct their damaged house under their own responsibility or a small standard house (50 to 60m2) constructed by the state in their lot. About 4,000 housing units were constructed in villages all over the disaster area. The paper focuses on this new housing policy. It presents the institutional framework, the procedures for the selection of eligible households, the geography of the constructed housing units, issues of project management and involved costs. It also attempts to highlight strong and weak points of the new approach and to make some comparisons with the long-established approach to recovery of damaged building stock. The overall conclusion is that despite huge complexities in project management and higher costs, this new policy contributed in retaining the population and enhancing development in the area.

Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Wei; Gowri, Krishnan; Lane, Michael D.

2009-09-28

This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

Toward the 21st Century: Preparing Strategic Thinkers in Vocational, Technical, and Occupational Education for Building Learning Communities.

ERIC Educational Resources Information Center

Groff, Warren H.

The 1992 component of Emergence of Vocational, Technical, and Occupational Education (E-VTO) focused on preparing strategic thinkers in vocational, technical, and occupational education (VTO) for building learning communities. The E-VTO seminar was one of the two seminars that comprised the VTO specialization of Nova University's doctoral program…

The Role of Language and Literacy in College- and Career-Ready Standards: Rethinking Policy and Practice in Support of English Language Learners. Policy Brief

ERIC Educational Resources Information Center

Haynes, Mariana

2012-01-01

The Common Core State Standards spell out the sophisticated language competencies that students will need to perform in academic and technical subject areas. English language learners (ELLs) face a double challenge--they must learn grade-level content while simultaneously building their language proficiency. This policy brief discusses these…

Building Space Power for the Nation: Air Force Achievements Challenges and Opportunities

DTIC Science & Technology

2006-01-01

since space capabilities play in planning and con- that time , they have advanced from simply ducting.joint military operations. Space forces proving...collect critical this is a relatively short period of time . Addi- itelligence over dtenied areas, primarily the tionally nnmerous changes in military...novative program management ; cutting-edge grams. Shifts in responsibilities, organization, technical and engineering expertise; rapid, and culture created

How Change Occurred at the Stoughton Area School District: Lessons from a SWIFT (Schoolwide Integrated Framework for Transformation) Knowledge Development Site. Issue Brief #3

ERIC Educational Resources Information Center

Stonemeier, Jennifer; Trader, Barbara; Kingston, Mary; Richards, Curtis; Blank, Rolf; East, Bill

2014-01-01

The SWIFT Center (Schoolwide Integrated Framework for Transformation) is an initiative to bring about educational equity district by district until all students excel, including students with the most profound needs. As the national technical assistance center to build schoolwide inclusive practices to improve academic and behavioral outcomes for…

Achieving Effective Risk Management Reduction Throughout Decommissioning at the Columbus Closure Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, K.D.

2006-07-01

Nuclear facility decontamination, dismantlement, and demolition activities provide a myriad of challenges along the path to reaching a safe, effective, and compliant decommissioning. Among the challenges faced during decommissioning, is the constant management and technical effort to eliminate, mitigate, or minimize the potential of risks of radiation exposures and other hazards to the worker, the surrounding community, and the environment. Management strategies to eliminate, mitigate, or minimize risks include incorporating strong safety and As Low As Reasonably Achievable (ALARA) principles into an integrated work planning process. Technical and operational strategies may include utilizing predictive risk analysis tools to establish contaminationmore » limits for demolition and using remote handling equipment to reduce occupational and radiation exposures to workers. ECC and E2 Closure Services, LLC (Closure Services) have effectively utilized these management and technical tools to eliminate, mitigate, and reduce radiation exposures under contract to the U.S. Department of Energy (DOE) for the decontamination and decommissioning Columbus Closure Project (CCP). In particular, Closure Services achieved significant dose reduction during the dismantling, decontamination, and demolition activities for Building JN-1. Management strategies during the interior dismantlement, decontamination, and demolition of the facility demanded an integrated work planning processes that involved project disciplines. Integrated planning processes identified multiple opportunities to incorporate the use of remote handling equipment during the interior dismantling and demolition activities within areas of high radiation. Technical strategies employed predictive risk analysis tools to set upper bounding contamination limits, allowed for the radiological demolition of the building without exceeding administrative dose limits to the worker, general public, and the environment. Adhering to management and technical strategies during the dismantlement, decontamination, and demolition of Building JN-1 enabled Closure Services to achieve strong ALARA performance, maintain absolute compliance under the regulatory requirements and meeting licensing conditions for decommissioning. (authors)« less

Programming of Urban Revitalization

NASA Astrophysics Data System (ADS)

Biliński, Tadeusz

2016-12-01

The planning stage of the investment-construction process is of a crucial importance. Its overall impact on the costs, construction time and the quality of design solutions is huge. However, in practice, little attention is given to this pre-design stage, except for public buildings or other buildings of particular importance. In consequence, the results of investment and construction activities are unsatisfactory. Therefore, the issue has been given careful consideration in this paper. The paper discusses the issue of programming urban revitalization, emphasizing its socio-economic importance. To illustrate the complexity of revitalization projects planning, the author draws attention to social, economic, technical and organisational factors, such as public participation, reorganization and revaluation of land use planning, rationalization of energy use, organization and management of revitalization processes, as well as technical progress. Summarising the paper, the author concludes that in order to improve the quality of life of town residents and to protect material national heritage, it is indispensable to continuously revitalize subsequent town areas.

Commercial Building Tenant Energy Usage Data Aggregation and Privacy: Technical Appendix

DOE Office of Scientific and Technical Information (OSTI.GOV)

Livingston, Olga V.; Pulsipher, Trenton C.; Anderson, David M.

2014-11-12

This technical appendix accompanies report PNNL–23786 “Commercial Building Tenant Energy Usage Data Aggregation and Privacy”. The objective is to provide background information on the methods utilized in the statistical analysis of the aggregation thresholds.

Acción Mutua (Shared Action): a multipronged approach to delivering capacity-building assistance to agencies serving Latino communities in the United States.

PubMed

Ayala, George; Chión, Miguel; Díaz, Rafael M; Heckert, Andrea L; Nuño, Monica; del Pino, Homero E; Rodríguez, Claudia; Schroeder, Kurt; Smith, Terry

2007-01-01

Culturally appropriate, theory-based capacity-building assistance can serve a vital role in helping HIV prevention providers remain up-to-date, effective, and responsive to those they serve. Funded by the Centers for Disease Control and Prevention (CDC), AIDS Project Los Angeles, in collaboration with San Francisco State University's César E. Chávez Institute, conducted full-day site visits and qualitative interviews in 2005 with mid-level management staff of CDC-funded community-based organizations delivering HIV prevention services to Latino communities in the western region of the United States. We found that agencies we visited (1) had not yet adapted the evidence-based interventions they were using at the time of our visit and (2) requested technical assistance and training in the areas of program development, evaluation, group facilitation techniques, consumer recruitment, client retention, intervention adaptation, and materials development. Findings from this needs assessment were used to inform our seven-pronged approach to delivering capacity-building assistance entitled "Acción Mutua" (Shared Action). The approach emphasizes strategic partnerships, stakeholder involvement, organizational self-assessment, culturally appropriate materials development, interactive training, tailored onsite technical assistance, and professional networking opportunities. This article describes our approach in detail, the assessment process we used to develop it, and its implications for capacity-building practice.

NICBR Events at the Spring Research Festival | Poster

Cancer.gov

Poster Staff May 5 NICBR Scientific Symposium 8:30 a.m.–4 p.m., Building 549 Auditorium The National Interagency Confederation for Biomedical Research (NICBR) Scientific Symposium is open to postdocs, postbacs, graduate students, and technical support staff. The theme of this day-long symposium is “The Microbiome: Host Response to Disease”; however, presentations can cover any area of research being conducted by NICBR member organizations.  

11. SITE BUILDING 002 SCANNER BUILDING EVAPORATIVE COOLING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. SITE BUILDING 002 - SCANNER BUILDING - EVAPORATIVE COOLING TOWER SYSTEM IN FOREGROUND. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

The research on regional conservation planning of urban historical and cultural areas based on GIS

NASA Astrophysics Data System (ADS)

Li, Shangli; Xu, Jian; Li, Qian

2017-06-01

With the rapid economic development and the growth of population happening in the urban historical and cultural areas, heritage and historical buildings along with their natural and artificial surrounding environments are suffering constructive destruction. Due to the lack of precise partition of protection region and construction control region in the local cultural relics protection law, traditional regional conservation planning cannot engaged with the urban controllability detailed planning very well. According to the several protection regulations about heritage and historical buildings from latest laws, we choose Baxian Temple area to study on the improvments of traditional regional conservation planning. The technical methods of this study mainly rely on GIS, which can complete the fundamental work of each stage. With the analytic hierarchy process(AHP), the comprehensive architectural value assessments can be calculated according to the investigation results. Based on the calculation results and visual corridor analysis, the precise range of protection region and construction control region can be decided and the specific protection measures can be formulated.

A technical framework to describe occupant behavior for building energy simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turner, William; Hong, Tianzhen

2013-12-20

Green buildings that fail to meet expected design performance criteria indicate that technology alone does not guarantee high performance. Human influences are quite often simplified and ignored in the design, construction, and operation of buildings. Energy-conscious human behavior has been demonstrated to be a significant positive factor for improving the indoor environment while reducing the energy use of buildings. In our study we developed a new technical framework to describe energy-related human behavior in buildings. The energy-related behavior includes accounting for individuals and groups of occupants and their interactions with building energy services systems, appliances and facilities. The technical frameworkmore » consists of four key components: i. the drivers behind energy-related occupant behavior, which are biological, societal, environmental, physical, and economical in nature ii. the needs of the occupants are based on satisfying criteria that are either physical (e.g. thermal, visual and acoustic comfort) or non-physical (e.g. entertainment, privacy, and social reward) iii. the actions that building occupants perform when their needs are not fulfilled iv. the systems with which an occupant can interact to satisfy their needs The technical framework aims to provide a standardized description of a complete set of human energy-related behaviors in the form of an XML schema. For each type of behavior (e.g., occupants opening/closing windows, switching on/off lights etc.) we identify a set of common behaviors based on a literature review, survey data, and our own field study and analysis. Stochastic models are adopted or developed for each type of behavior to enable the evaluation of the impact of human behavior on energy use in buildings, during either the design or operation phase. We will also demonstrate the use of the technical framework in assessing the impact of occupancy behavior on energy saving technologies. The technical framework presented is part of our human behavior research, a 5-year program under the U.S. - China Clean Energy Research Center for Building Energy Efficiency.« less

Technical Aspects for the Creation of a Multi-Dimensional Land Information System

NASA Astrophysics Data System (ADS)

Ioannidis, Charalabos; Potsiou, Chryssy; Soile, Sofia; Verykokou, Styliani; Mourafetis, George; Doulamis, Nikolaos

2016-06-01

The complexity of modern urban environments and civil demands for fast, reliable and affordable decision-making requires not only a 3D Land Information System, which tends to replace traditional 2D LIS architectures, but also the need to address the time and scale parameters, that is, the 3D geometry of buildings in various time instances (4th dimension) at various levels of detail (LoDs - 5th dimension). This paper describes and proposes solutions for technical aspects that need to be addressed for the 5D modelling pipeline. Such solutions include the creation of a 3D model, the application of a selective modelling procedure between various time instances and at various LoDs, enriched with cadastral and other spatial data, and a procedural modelling approach for the representation of the inner parts of the buildings. The methodology is based on automatic change detection algorithms for spatial-temporal analysis of the changes that took place in subsequent time periods, using dense image matching and structure from motion algorithms. The selective modelling approach allows a detailed modelling only for the areas where spatial changes are detected. The procedural modelling techniques use programming languages for the textual semantic description of a building; they require the modeller to describe its part-to-whole relationships. Finally, a 5D viewer is developed, in order to tackle existing limitations that accompany the use of global systems, such as the Google Earth or the Google Maps, as visualization software. An application based on the proposed methodology in an urban area is presented and it provides satisfactory results.

2. SITE BUILDING 002 SCANNER BUILDING VIEW IS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. SITE BUILDING 002 - SCANNER BUILDING - VIEW IS LOOKING NORTH 80° WEST "B" FACE ALONG BUILDING "A" FACE. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

NEET-AMM Final Technical Report on Laser Direct Manufacturing (LDM) for Nuclear Power Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Scott; Baca, Georgina; O'Connor, Michael

2015-12-31

Final technical report summarizes the program progress and technical accomplishments of the Laser Direct Manufacturing (LDM) for Nuclear Power Components project. A series of experiments varying build process parameters (scan speed and laser power) were conducted at the outset to establish the optimal build conditions for each of the alloys. Fabrication was completed in collaboration with Quad City Manufacturing Laboratory (QCML). The density of all sample specimens was measured and compared to literature values. Optimal build process conditions giving fabricated part densities close to literature values were chosen for making mechanical test coupons. Test coupons whose principal axis is onmore » the x-y plane (perpendicular to build direction) and on the z plane (parallel to build direction) were built and tested as part of the experimental build matrix to understand the impact of the anisotropic nature of the process.. Investigations are described 316L SS, Inconel 600, 718 and 800 and oxide dispersion strengthed 316L SS (Yttria) alloys.« less

33. SITE BUILDING 002 SCANNER BUILDING MECHANICAL ROOM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

33. SITE BUILDING 002 - SCANNER BUILDING - MECHANICAL ROOM 105, VIEW OF CHILLER ROOM MOTOR CONTROL CENTER. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

NREL Technical Reports Guide the Way to 50% Energy Savings in Hospitals, Office Buildings (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2011-02-01

Researchers at the National Renewable Energy Laboratory (NREL) have developed two technical reports that provide recommendations to help designers and operators of large office buildings and hospitals achieve at least a 50% energy savings using existing technology.

Spent nuclear fuel canister storage building conceptual design report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swenson, C.E.

This Conceptual Design Report provides the technical basis for the Spent Nuclear Fuels Project, Canister Storage Building, and as amended by letter (correspondence number 9555700, M.E. Witherspoon to E.B. Sellers, ``Technical Baseline and Updated Cost Estimate for the Canister Storage Building``, dated October 24, 1995), includes the project cost baseline and Criteria to be used as the basis for starting detailed design in fiscal year 1995.

Built-Up Area Feature Extraction: Second Year Technical Progress Report

DTIC Science & Technology

1990-02-01

Contract DACA 72-87-C-001. During this year we have built on previous research, in road network extraction and in the detection and delineation of buildings...methods to perform stereo analysis using loosely coupled techniques where comparison is deferred until each method has performed a complete estimate...or missing information. A course of action may be suggested to the user depending on the error. Although the checks do not guarantee the correctness

Core Science Systems--Mission overview

USGS Publications Warehouse

Gallagher, Kevin T.

2012-01-01

CSS provides a foundation for all USGS Mission Areas, as well as for the mission of the Department of the Interior (DOI), in the following ways: 1) Conducts basic and applied science research and development 2) Fosters broad understanding and application of analyses and information 3) Provides a framework for data and information sharing 4) Creates new geospatially enabled data and information 5) Provides technical expertise in standards and methods 6) Builds and facilitates partnerships and innovation

18. SITE BUILDING 002 SCANNER BUILDING VIEW OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. SITE BUILDING 002 - SCANNER BUILDING - VIEW OF SITE SECURITY OFFICE ACCESS DOOR FROM EXTERIOR OF OFFICE. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

24. SITE BUILDING 002 SCANNER BUILDING OPERATIONS CENTER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. SITE BUILDING 002 - SCANNER BUILDING - OPERATIONS CENTER -- MWOC IN OPEARATION AT 1924 ZULU TIME. 26 OCTOBER, 1999. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Subsurface information for risk-sensitive urban spatial planning in Dhaka Metropolitan City, Bangladesh

NASA Astrophysics Data System (ADS)

Günther, Andreas; Aziz Patwary, Mohammad Abdul; Bahls, Rebecca; Asaduzzaman, Atm; Ludwig, Rüdiger; Ashraful Kamal, Mohammad; Nahar Faruqa, Nurun; Jabeen, Sarwat

2016-04-01

Dhaka Metropolitan City (including Dhaka and five adjacent municipal areas) is one of the fastest developing urban regions in the world. Densely build-up areas in the developed metropolitan area of Dhaka City are subject to extensive restructuring as common six- or lower storied buildings are replaced by higher and heavier constructions. Additional stories are built on existing houses, frequently exceeding the allowable bearing pressure on the subsoil as supported by the foundations. In turn, newly developing city areas are projected in marshy terrains modified by extensive, largely unengineered landfills. In most areas, these terrains bear unfavorable building ground conditions within 30 meters. Within a collaborative technical cooperation project between Bangladesh and Germany, BGR supports GSB in the provision of geo-information for the Capital Development Authority (RAJUK). For general urban planning, RAJUK successively develops a detailed area plan (DAP) at scale 1 : 50000 for the whole Dhaka Metropolitan City area (approx. 1700 km2). Geo-information have not been considered in the present DAP. Within the project, geospatial information in form of a geomorphic map, a digital terrain model and a 3-D subsurface model covering the whole city area have been generated at a scale of 1 : 50000. An extensive engineering geological data base consisting of more than 2200 borehole data with associated Standard Penetration Testing (SPT) and lab data has been compiled. With the field testing (SPT) and engineering geological lab data, the 3-D subsurface model can be parameterized to derive important spatial subsurface information for urban planning like bearing capacity evaluations for different foundation designs or soil liquefaction potential assessments for specific earthquake scenarios. In conjunction with inundation potential evaluations for different flooding scenarios, comprehensive building ground suitability information can be derived to support risk-sensitive urban planning in Dhaka Metropolitan City area at the DAP scale

Building Diagnostic Market Deployment - Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Katipamula, S.; Gayeski, N.

2012-04-30

Operational faults are pervasive across the commercial buildings sector, wasting energy and increasing energy costs by up to about 30% (Mills 2009, Liu et al. 2003, Claridge et al. 2000, Katipamula and Brambley 2008, and Brambley and Katipamula 2009). Automated fault detection and diagnostic (AFDD) tools provide capabilities essential for detecting and correcting these problems and eliminating the associated energy waste and costs. The U.S. Department of Energy's (DOE) Building Technology Program (BTP) has previously invested in developing and testing of such diagnostic tools for whole-building (and major system) energy use, air handlers, chillers, cooling towers, chilled-water distribution systems, andmore » boilers. These diagnostic processes can be used to make the commercial buildings more energy efficient. The work described in this report was done as part of a Cooperative Research and Development Agreement (CRADA) between the U.S. Department of Energy's Pacific Northwest National Laboratory (PNNL) and KGS Building LLC (KGS). PNNL and KGS both believe that the widespread adoption of AFDD tools will result in significant reduction to energy and peak energy consumption. The report provides an introduction and summary of the various tasks performed under the CRADA. The CRADA project had three major focus areas: (1) Technical Assistance for Whole Building Energy Diagnostician (WBE) Commercialization, (2) Market Transfer of the Outdoor Air/Economizer Diagnostician (OAE), and (3) Development and Deployment of Automated Diagnostics to Improve Large Commercial Building Operations. PNNL has previously developed two diagnostic tools: (1) whole building energy (WBE) diagnostician and (2) outdoor air/economizer (OAE) diagnostician. WBE diagnostician is currently licensed non-exclusively to one company. As part of this CRADA, PNNL developed implementation documentation and provided technical support to KGS to implement the tool into their software suite, Clockworks. PNNL also provided validation data sets and the WBE software tool to validate the KGS implementation. OAE diagnostician automatically detects and diagnoses problems with outdoor air ventilation and economizer operation for air handling units (AHUs) in commercial buildings using data available from building automation systems (BASs). As part of this CRADA, PNNL developed implementation documentation and provided technical support to KGS to implement the tool into their software suite. PNNL also provided validation data sets and the OAE software tool to validate the KGS implementation. Finally, as part of this CRADA project, PNNL developed new processes to automate parts of the re-tuning process and transfer those process to KGS for integration into their software product. The transfer of DOE-funded technologies will transform the commercial buildings sector by making buildings more energy efficient and also reducing the carbon footprint from the buildings. As part of the CRADA with PNNL, KGS implemented the whole building energy diagnostician, a portion of outdoor air economizer diagnostician and a number of measures that automate the identification of re-tuning measures.« less

13 CFR 119.4 - What services or activities must PRIME grant funds be used for?

Code of Federal Regulations, 2010 CFR

2010-01-01

... to— (a) Provide training and technical assistance to disadvantaged microentrepreneurs (“Technical Assistance Grant”); (b) Provide training and capacity building services to microenterprise development organizations and programs to assist them to develop microenterprise training and services (“Capacity Building...

78. View of radar systems technical publication library, transmitter building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

78. View of radar systems technical publication library, transmitter building no. 102, second floor. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

Daemen Alternative Energy/Geothermal Technologies Demonstration Program Erie County

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beiswanger, Jr, Robert C

2010-05-20

The purpose of the Daemen Alternative Energy/Geothermal Technologies Demonstration Project is to demonstrate the use of geothermal technology as model for energy and environmental efficiency in heating and cooling older, highly inefficient buildings. The former Marian Library building at Daemen College is a 19,000 square foot building located in the center of campus. Through this project, the building was equipped with geothermal technology and results were disseminated. Gold LEED certification for the building was awarded. 1) How the research adds to the understanding of the area investigated. This project is primarily a demonstration project. Information about the installation is availablemore » to other companies, organizations, and higher education institutions that may be interested in using geothermal energy for heating and cooling older buildings. 2) The technical effectiveness and economic feasibility of the methods or techniques investigated or demonstrated. According to the modeling and estimates through Stantec, the energy-efficiency cost savings is estimated at 20%, or $24,000 per year. Over 20 years this represents $480,000 in unrestricted revenue available for College operations. See attached technical assistance report. 3) How the project is otherwise of benefit to the public. The Daemen College Geothermal Technologies Ground Source Heat Pumps project sets a standard for retrofitting older, highly inefficient, energy wasting and environmentally irresponsible buildings quite typical of many of the buildings on the campuses of regional colleges and universities. As a model, the project serves as an energy-efficient system with significant environmental advantages. Information about the energy-efficiency measures is available to other colleges and universities, organizations and companies, students, and other interested parties. The installation and renovation provided employment for 120 individuals during the award period. Through the new Center, Daemen will continue to host a range of events on campus for the general public. The College does not charge fees for speakers or most other events. This has been a long-standing tradition of the College.« less

Daemen Alternative Energy/Geothermal Technologies Demonstration Program, Erie County

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beiswanger, Robert C.

The purpose of the Daemen Alternative Energy/Geothermal Technologies Demonstration Project is to demonstrate the use of geothermal technology as model for energy and environmental efficiency in heating and cooling older, highly inefficient buildings. The former Marian Library building at Daemen College is a 19,000 square foot building located in the center of campus. Through this project, the building was equipped with geothermal technology and results were disseminated. Gold LEED certification for the building was awarded. 1) How the research adds to the understanding of the area investigated. This project is primarily a demonstration project. Information about the installation is availablemore » to other companies, organizations, and higher education institutions that may be interested in using geothermal energy for heating and cooling older buildings. 2) The technical effectiveness and economic feasibility of the methods or techniques investigated or demonstrated. According to the modeling and estimates through Stantec, the energy-efficiency cost savings is estimated at 20%, or $24,000 per year. Over 20 years this represents $480,000 in unrestricted revenue available for College operations. See attached technical assistance report. 3) How the project is otherwise of benefit to the public. The Daemen College Geothermal Technologies Ground Source Heat Pumps project sets a standard for retrofitting older, highly inefficient, energy wasting and environmentally irresponsible buildings that are quite typical of many of the buildings on the campuses of regional colleges and universities. As a model, the project serves as an energy-efficient system with significant environmental advantages. Information about the energy-efficiency measures is available to other colleges and universities, organizations and companies, students, and other interested parties. The installation and renovation provided employment for 120 individuals during the award period. Through the new Center, Daemen will continue to host a range of events on campus for the general public. The College does not charge fees for speakers or most other events. This has been a long-standing tradition of the College.« less

Technology Transfer Demonstration Project. Progress report, December 1993--January 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-06-01

The Rural Enterprises Industrial Incubator program offers beginning business a stable foundation on which to build long-term profitable concerns. These incubator facilities consist of buildings for the specific purpose of starting a new manufacturing business and are designed to accommodate a variety of manufacturing firms. Incubators are located on the Kiamichi Area Vocational Technical School system (KAVTS) campuses in Durant, Atoka, Hugo, McAlester, Stigler, Poteau, Idabel, at the REI headquarters and one in Bennington, OK. These facilities range in size from 4,800 sq.ft. to 14,000 sq.ft. and have housed businesses such as machine shops, metal fabrication companies, electronic assembly andmore » biomedical engineering firms.« less

Tribal Green Building Administrative Code Example

EPA Pesticide Factsheets

This Tribal Green Building Administrative Code Example can be used as a template for technical code selection (i.e., building, electrical, plumbing, etc.) to be adopted as a comprehensive building code.

23. SITE BUILDING 002 SCANNER BUILDING RADAR CONTROL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. SITE BUILDING 002 - SCANNER BUILDING - RADAR CONTROL INTERFACE "RCL NO. 2" WITH COMPUTER CONTROL DISC DRIVE UNITS IN FOREGROUND. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Technical Problems of Residential Construction

NASA Astrophysics Data System (ADS)

Nowogońska, Beata; Cibis, Jerzy

2017-10-01

Beauty, utility, durability - these are the features of good architecture and should also be the distinguishing qualities of every residential building. But do beauty and utility remain along with the passing of time? Performance characteristics are an indicator of both, the technical as well as aesthetic state of buildings. Aesthetic needs are in disagreement with the merciless aging process. The beauty of a city is formed not only by the original forms of new residential buildings, but also by existing tenement housing; thus preserving their aesthetics becomes a necessity. Time is continuously passing and along with it, aging intensifies. The aging process is a natural phenomenon for every material. The life expectancy of building materials is also limited. Along with the passing of time, the technical state of residential buildings continuously deteriorates. With the passing of time, the aesthetic values and preferences of users of flats change and the usability of the building decreases. The permanence of buildings, including residential buildings, is shaped not only by the forces of nature but also by activities of humans. A long lifespan is ensured by carrying out ongoing, systematic renovation-repair works. It is thanks to them that buildings derived from past centuries are still being used, and their market attractiveness is not decreasing.

Existing School Buildings: Incremental Seismic Retrofit Opportunities.

ERIC Educational Resources Information Center

Federal Emergency Management Agency, Washington, DC.

The intent of this document is to provide technical guidance to school district facility managers for linking specific incremental seismic retrofit opportunities to specific maintenance and capital improvement projects. The linkages are based on logical affinities, such as technical fit, location of the work within the building, cost saving…

20 CFR 628.325 - Incentive grants, capacity building, and technical assistance.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., exceeding title II performance standards (section 106(b)(7)). (2) Incentive grant funds under this section... give consideration to recognizing the performance of service providers within the State. (5) SDA's... capacity building and technical assistance efforts aimed at improving the competencies of the personnel who...

A method for building evaluation competency among community-based organizations.

PubMed

Kelly, Cheryl M; LaRose, Jessi; Scharff, Darcell P

2014-05-01

Community-based organizations often lack the capacity (e.g., time, staff, skills) to effectively evaluate programs, policies, and environmental changes. Providing evaluation technical assistance and training can be an effective and feasible way to build individual evaluation competency. The purpose of this article is to present a practical approach and related tools that can be used by evaluators and others (e.g., academic partners, funders) providing assistance to build evaluation skills in community organizations. The approach described was developed in collaboration with local universities and a regional health foundation to provide intensive technical support to 19 community-based organizations awarded funding to implement obesity prevention projects. Technical assistance processes and tools were designed to be tailored to organizations' capacity and needs and can be used as templates by others who provide technical assistance. Evaluators, funders, and academic partners can use lessons learned from this experience to help shape and implement evaluation technical assistance approaches with community-based organizations.

Using qualitative methods to understand non-technological aspects of domestic energy efficiency

NASA Astrophysics Data System (ADS)

Ambrose, Aimee Rebecca

The overall aim of the collected published works is to investigate how different policy interventions in the field of energy efficiency (including zero carbon homes, low carbon heat networks, and domestic energy efficiency schemes) are experienced and made sense of by a range of key actors. A further aim is to understand these interventions in the context of existing theories within the field of domestic energy efficiency including socio-technical theory and Actor Network Theory. More specifically, this research advances existing knowledge in the following areas: The nature of the socio-technical challenges encountered in the introduction of more energy efficient buildings, and the importance of achieving a balance between socially acceptable and technically optimal environments. (Papers 2, 3, 4, 6 and 8). The value of qualitative research in gaining a more nuanced understanding of our relationship with the home and the implications of this for domestic energy efficiency interventions and the design of low energy buildings (all papers). The influence of tenure as determinant of access to a more energy efficient home and in particular, the stubborn and complex barriers to achieving higher standards of energy performance within the private rented sector. (Papers 1, 2, 3 and 4). The significance of identity, setting and notions of home in the context of domestic energy efficiency interventions. (Papers 1 and 4). As these themes suggest, this PhD is not just concerned with carbon reduction and energy saving as technical objects, but as a way of life. More specifically, it considers the interactions between the two and contends that technical or policy instruments, no matter how sophisticated, cannot succeed if they are not compatible with our ways of life (and ways of doing businesss) or if our ways of life cannot be reasonably adapted to acoomodate them.

TangibleCubes — Implementation of Tangible User Interfaces through the Usage of Microcontroller and Sensor Technology

NASA Astrophysics Data System (ADS)

Setscheny, Stephan

The interaction between human beings and technology builds a central aspect in human life. The most common form of this human-technology interface is the graphical user interface which is controlled through the mouse and the keyboard. In consequence of continuous miniaturization and the increasing performance of microcontrollers and sensors for the detection of human interactions, developers receive new possibilities for realising innovative interfaces. As far as this movement is concerned, the relevance of computers in the common sense and graphical user interfaces is decreasing. Especially in the area of ubiquitous computing and the interaction through tangible user interfaces a highly impact of this technical evolution can be seen. Apart from this, tangible and experience able interaction offers users the possibility of an interactive and intuitive method for controlling technical objects. The implementation of microcontrollers for control functions and sensors enables the realisation of these experience able interfaces. Besides the theories about tangible user interfaces, the consideration about sensors and the Arduino platform builds a main aspect of this work.

Energy sustainable cities. From eco villages, eco districts towards zero carbon cities

NASA Astrophysics Data System (ADS)

Zaręba, Anna; Krzemińska, Alicja; Łach, Janusz

2017-11-01

Minimizing energy consumption is the effect of sustainable design technics as among many others: designing buildings with solar access and natural ventilation, using climate responsive design materials and effective insulation. Contemporary examples of zero-carbon cities: Masdar City, United Arab Emirates and Dongtan, China, confirm technical feasibility of renewable energy by implementation of solar PV and wind technologies. The ecological city - medium or high density urban settlement separated by greenspace causes the smallest possible ecological footprint on the surrounding countryside through efficient use of land and its resources, recycling used materials and converting waste to energy. This paper investigates the concept of energy sustainable cities, examines, how urban settlements might affect building energy design in eco-villages, eco-districts (e.g. Vauban, Freiburg in Germany, Bo01 Malmo in Sweden), and discuss the strategies for achieving Zero Emission Cities principles in densely populated areas. It is focused on low energy architectural design solutions which could be incorporated into urban settlements to create ecological villages, districts and cities, designed with consideration of environmental impact, required minimal inputs of energy, water, food, waste and pollution.

Building Capacity for Evidence-Based Public Health: Reconciling the Pulls of Practice and the Push of Research.

PubMed

Brownson, Ross C; Fielding, Jonathan E; Green, Lawrence W

2018-04-01

Timely implementation of principles of evidence-based public health (EBPH) is critical for bridging the gap between discovery of new knowledge and its application. Public health organizations need sufficient capacity (the availability of resources, structures, and workforce to plan, deliver, and evaluate the preventive dose of an evidence-based intervention) to move science to practice. We review principles of EBPH, the importance of capacity building to advance evidence-based approaches, promising approaches for capacity building, and future areas for research and practice. Although there is general agreement among practitioners and scientists on the importance of EBPH, there is less clarity on the definition of evidence, how to find it, and how, when, and where to use it. Capacity for EBPH is needed among both individuals and organizations. Capacity can be strengthened via training, use of tools, technical assistance, assessment and feedback, peer networking, and incentives. Modest investments in EBPH capacity building will foster more effective public health practice.

Building capacity for evidence-based public health: Reconciling the pulls of practice and the push of research

PubMed Central

Fielding, Jonathan E.; Green, Lawrence W.

2018-01-01

Timely implementation of principles of evidence-based public health (EBPH) is critical for bridging the gap between discovery of new knowledge and application. Public health organizations need sufficient capacity (the availability of resources, structures, and workforce to plan deliver and evaluate the “preventive dose” of an evidence-based intervention) to move science to practice. We review principles of EBPH, the importance of capacity building to advance evidence-based approaches, promising approaches for capacity building, and future areas for research and practice. While there is general agreement on the importance of EBPH, there is less clarity on the definition of evidence, how to find it, and how, when and where to use it. Capacity for EBPH is needed among both individuals and organizations. Capacity can be strengthened via training, use of tools, technical assistance, assessment and feedback, peer networking, and incentives. Modest investments in EBPH capacity-building will foster more effective public health practice. PMID:29166243

Technical Feasibility Study for Zero Energy K-12 Schools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonnema, Eric; Goldwasser, David; Torcellini, Paul

This technical feasibility study provides documentation and research results supporting a possible set of strategies to achieve source zero energy K-12 school buildings as defined by the U.S. Department of Energy (DOE) zero energy building (ZEB) definition (DOE 2015a). Under this definition, a ZEB is an energy-efficient building in which, on a source energy basis, the actual annual delivered energy is less than or equal to the on-site renewable exported energy.

Geo-information for sustainable urban development of Greater Dhaka City, Bangladesh

NASA Astrophysics Data System (ADS)

Günther, Andreas; Asaduzzaman, Atm; Bahls, Rebecca; Ludwig, Rüdiger; Ashraful Kamal, Mohammad; Nahar Faruqa, Nurun

2015-04-01

Greater Dhaka City (including Dhaka and five adjacent municipal areas) is one of the fastest developing urban regions in the world. Densely build-up areas in the developed metropolitan area of Dhaka City are subject to extensive restructuring as common six-storied buildings are replaced by higher and heavier constructions. Additional stories are built on existing houses, frequently exceeding the allowable bearing pressure on the subsoil as supported by the foundations. In turn, newly developing areas are projected in marshy areas modified by extensive, largely unengineered landfills. In many areas, these terrains bear unfavorable building ground conditions, and reliable geospatial information is a major prerequisite for risk-sensitive urban planning. Within a collaborative technical cooperation project between Bangladesh and Germany, BGR supports GSB in the provision of geo-information for the Capital Development authority (RAJUK). For general urban planning, RAJUK successively develops a detailed area plan (DAP) at scale 1 : 50000 for the whole Greater Dhaka City area. Geospatial information have not been considered in the present DAP. Within the project, GSB prepared a detailed geomorphologic map matching the DAP both in areal extent and scale. The geomorphological setting can be used as an important spatial proxy for the characterization of the subsurface since highly segmented, elevated terraces consisting of consolidated sandy Pliocene deposits overlain by stiff Plio-Pleistocene sediments are sharply bordered by low lying-areas. The floodplain and marsh areas are consisting of thick, mechanically weak Holocene fluvial sandy-silty sediments that are sometimes alternated by organic layers. A first expert-based engineering geological reclassification of the geomorphological map resulting in five building ground suitability classes is highly supported by the spatial analysis of extensive archive borehole information consisting of depth-continuous standard penetration test (SPT) observations, engineering geological sample analyses and lithological profiles. The database compiled within the project currently contains more than 1600 locations. The joining of the spatial geomorphological information with the borehole data allows a specific characterization of the building ground classes in terms of bearing capacities for different foundation designs, earthquake-induced subsoil liquefaction potentials and depth-to-engineering rock head considerations. First-order hazard and cost scenarios for several general types of projected settlements can already be broadly evaluated with the data presented in a small scale (DAP scale). However, detailed building ground surveys have to be performed at larger spatial scales (1 : 10000 - 1 : 5000) in areas assigned for new settlements. These involve regular spaced borehole observations, 3-D modeling of the subsurface and geophysical loggings. Within the project, specific representative pilot areas in different geomorphological settings are defined where detailed geospatial building ground investigations are conducted, providing a robust basis for sustainable urban planning related to natural and technological hazards and their associated risks.

The Development and Testing of a Statewide Multilevel Curriculum Management System for Georgia Vocational Education Programs. Curriculum Management Handbook for Vocational Administrators in Comprehensive High Schools, Post-Secondary Area Vocational-Technical Schools and Community College Vocational Programs.

ERIC Educational Resources Information Center

Scott, Paul; Moye, Mike

Developed to assist the building-level administrator in implementing a curriculum management system, this handbook considers two of five duties the vocational administrator must perform to meet the obligations of curriculum management: (1) performing curriculum management functions for the vocational program and (2) implementing and conducting an…

Advanced Structures: 2000-2004

NASA Technical Reports Server (NTRS)

2004-01-01

This custom bibliography from the NASA Scientific and Technical Information Program lists a sampling of records found in the NASA Aeronautics and Space Database. The scope of this topic includes technologies for extremely lightweight, multi-function structures with modular interfaces - the building-block technology for advanced spacecraft. This area of focus is one of the enabling technologies as defined by NASA s Report of the President s Commission on Implementation of United States Space Exploration Policy, published in June 2004.

Economic and Environmental Assessment of a 1 MW Grid Connected Rooftop Solar PV System for Energy Efficient Building in Bangladesh

NASA Astrophysics Data System (ADS)

Chakraborty, Sanjib; Hosain, Rubayet; Rahman, Toufiqur; Rabbi, Ahmead Fazle

This paper evaluates the potentiality of a 1 MW grid connected rooftop solar PV system for an Energy Efficient Building in Bangladesh, which was estimated by utilizing NASA SSE solar radiation data, PVsyst simulation software and RETScreen simulation software. Economic and environmental viability for a ten-storied building with roof area of 6,500 m2 in the Capital City of Bangladesh, Dhaka was assessed by using the RETScreen simulation software. The yearly electricity production of the proposed system was 1,581 MWh estimated by PVsyst where the technical prospective of gird-connected solar PV in Bangladesh was calculated as about 50,174 MW. The economic assessments were determined the simple payback in such a way that the generated electricity first fulfills the demand of the building, and then the rest of the energy is supplied to the grid. The result indicates that the roof top solar PV system for an Energy efficient building in Dhaka city has a favorable condition for development both in economic and environmental point of view.

'Buildings in Use' Study. Technical Factors.

ERIC Educational Resources Information Center

Wisconsin Univ., Milwaukee. School of Architecture and Urban Planning.

The second report of the 'Buildings in Use' study documents the results of over 100 field tests conducted at four elementary schools, as well as discussion of these results and relevant technical specifications and details. The procedural framework used in the Field Tests Manual is followed and test results are rated numerically wherever possible.…

Economic Evaluation of Building Design, Construction, Operation and Maintenance. Instructor's Manual.

ERIC Educational Resources Information Center

Ruegg, Rosalie T.; Marshall, Harold E.

This instructor's manual describes each section of a 3-day technical seminar on how to measure the economic impact of alternative designs, systems, and operation and maintenance strategies in federal buildings. The manual was prepared to help instructors of the General Services Administration conduct technically sound and comprehensive seminars.…

Promoting Teachers' Learning and Knowledge Building in a Socio-Technical System

ERIC Educational Resources Information Center

Tammets, Kairit; Pata, Kai; Laanpere, Mart

2013-01-01

The study proposes a way in which the learning and knowledge building (LKB) framework, which is consistent with the knowledge conversion phases proposed by Nonaka and Takeuchi, supports teachers' informal and self-directed workplace learning. An LKB framework in a socio-technical system was developed to support professional development in an…

Building capacity for health promotion--a case study from China.

PubMed

Tang, Kwok-Cho; Nutbeam, Don; Kong, Lingzhi; Wang, Ruotao; Yan, Jun

2005-09-01

During the period 1997-2000 a technical assistance project to build capacity for community-based health promotion was implemented in seven cities and one province in China. The technical assistance project formed part of a much larger World Bank supported program to improve disease prevention capabilities in China, commonly known as Health VII. The technical assistance project was funded by the Australian Agency for International Development. It was designed to develop capacity within the Ministry of Health (MOH) and the cities and province in the management of community-based health promotion projects, as well as supporting institutional development and public health policy reform. There are some relatively unique features of this technical assistance which helped shape its implementation and impact. It sought to provide the Chinese MOH and the cities and province with an introduction to comprehensive health promotion strategies, in contrast to the more limited information, education and communication strategies. The project was provided on a continuing basis over 3 years through a single institution, rather than as a series of ad hoc consultancies by individuals. Teaching and learning processes were developmental, leading progressively to a greater degree of local Chinese input and management to ensure sustainability and maintenance of technical support for the project. Based on this experience, this paper presents a model for capacity building projects of this type. It describes the education, training and planning activities that were the key inputs to the project, as well as the limited available evidence on the impact of the project. It describes how the project evolved over time to meet the changing needs of the participants, specifically how the content of the project shifted from a risk-factor orientation to a settings-based focus, and the delivery of the project moved from an expert-led approach to a more participatory, problem based learning approach. In terms of impact, marked differences before and after the implementation of the training activities were identified in key areas for reform, in addition to the self reported positive change in knowledge, and a high level of participant satisfaction. Key lessons are summarized. Technical assistance projects of this kind benefit from continuity and a high level of coordination, the provision of culturally and linguistically appropriate teaching, and a clear understanding of the need to match workforce development with organizational/institutional development.

The Consortium of Advanced Residential Buildings (CARB) - A Building America Energy Efficient Housing Partnership

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robb Aldrich; Lois Arena; Dianne Griffiths

2010-12-31

This final report summarizes the work conducted by the Consortium of Advanced Residential Buildings (CARB) (http://www.carb-swa.com/), one of the 'Building America Energy Efficient Housing Partnership' Industry Teams, for the period January 1, 2008 to December 31, 2010. The Building America Program (BAP) is part of the Department of Energy (DOE), Energy Efficiency and Renewable Energy, Building Technologies Program (BTP). The long term goal of the BAP is to develop cost effective, production ready systems in five major climate zones that will result in zero energy homes (ZEH) that produce as much energy as they use on an annual basis bymore » 2020. CARB is led by Steven Winter Associates, Inc. with Davis Energy Group, Inc. (DEG), MaGrann Associates, and Johnson Research, LLC as team members. In partnership with our numerous builders and industry partners, work was performed in three primary areas - advanced systems research, prototype home development, and technical support for communities of high performance homes. Our advanced systems research work focuses on developing a better understanding of the installed performance of advanced technology systems when integrated in a whole-house scenario. Technology systems researched included: - High-R Wall Assemblies - Non-Ducted Air-Source Heat Pumps - Low-Load HVAC Systems - Solar Thermal Water Heating - Ventilation Systems - Cold-Climate Ground and Air Source Heat Pumps - Hot/Dry Climate Air-to-Water Heat Pump - Condensing Boilers - Evaporative condensers - Water Heating CARB continued to support several prototype home projects in the design and specification phase. These projects are located in all five program climate regions and most are targeting greater than 50% source energy savings over the Building America Benchmark home. CARB provided technical support and developed builder project case studies to be included in near-term Joule Milestone reports for the following community scale projects: - SBER Overlook at Clipper Mill (mixed, humid climate) - William Ryan Homes - Tampa (hot, humid climate).« less

5. SITE BUILDING 002 SCANNER BUILDING AT "A" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. SITE BUILDING 002 - SCANNER BUILDING - AT "A" FACE (ON SOUTH SIDE) LOOKING DIRECTLY UP RADAR SYSTEM EMITTER/ANTENNA ARRAY FACE WITH 90MM STANDARD LENS. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Technical Feasibility Study for Zero Energy K-12 Schools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pless, Shanti D.; Torcellini, Paul A.; Bonnema, Eric

A simulation-based technical feasibility study was completed to show the types of technologies required to achieve ZEB status with this building type. These technologies are prioritized across the building's subsystem such that design teams can readily integrate the ideas. Energy use intensity (EUI) targets were established for U.S. climate zones such that K-12 schools can be zero-ready or can procure solar panels or other renewable energy production sources to meet the zero energy building definition. Results showed that it is possible for K-12 schools to achieve zero energy when the EUI is between 20 and 26 kBtu/ft2/yr. Temperate climates requiredmore » a smaller percentage of solar panel coverage than very hot or very cold climates. The paper provides a foundation for technically achieving zero energy schools with a vision of transforming the school construction market to mainstream zero energy buildings within typical construction budgets.« less

Problems of Technology of Energy-Saving Buildings and Their Impact on Energy Efficiency in Buildings

NASA Astrophysics Data System (ADS)

Kwasnowski, Pawel; Fedorczak-Cisak, Malgorzata; Knap, Katarzyna

2017-10-01

Introduction of EPBD in legislation of the EU member states caused that buildings must meet very stringent requirements of thermal protection and energy efficiency. On the basis of EPBD provisions, EU Member States introduce standard of NZEB (Nearly Zero-Energy Buildings). Such activities cause a need for new, innovative materials and technologies, and new approaches to design, construction and retrofitting of buildings. Indispensable is the precise coordination of the design of structure and technical installations of building, which may be provided in an integrated design process in the system BIM. Good coordination and cooperation of all contractors during the construction phase is also necessary. The article presents the problems and the new methodology for the design, construction and use of energy efficient buildings in terms of energy saving technologies, including discussion of the significant impact of the automation of technical installations on the building energy efficiency.

Tale of Two Cities: Greensburg Resurrected as a National Model for Green Communities (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This fact sheet provides a summary of how NREL's technical assistance in Greensburg, Kansas, helped the town rebuild green after recovering from a tornado in May 2007. Greensburg, Kansas, was like any rural community in America until a massive tornado leveled much of the town on May 4, 2007. Key leaders in Greensburg and Kansas made a crucial decision not just to rebuild, but to remake the town as a model sustainable community. To help achieve that goal, technical experts from the U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory (NREL) arrived in Greensburg in June 2007.more » For three years, the experts worked with city leaders, business owners, residents, and other state, federal, and local agencies to identify ways to incorporate energy efficiency and renewable energy technologies into the town's rebuilding efforts. NREL conducted detailed studies to examine energy use; availability of renewable energy resources; energy options; and potential integrated energy solutions that could also be replicated in other communities recovering from disaster or working toward building green. Those recommendations were incorporated into the Greensburg Sustainable Comprehensive Master Plan and furthered the town's vision of becoming an affordable sustainable community. Technical assistance provided by NREL has impacted the following areas in Greensburg's resurrection. Residents also formed a non-profit organization, Greensburg GreenTown{trademark}, to provide resources and support for rebuilding. Through energy modeling, education, training, and onsite assistance, NREL helped renovate and rebuild homes in Greensburg that on average, use 40% less energy than similar buildings built to code - surpassing the goal NREL originally set to achieve 30% energy savings in residential buildings.« less

Developing cancer control capacity in state and local public health agencies.

PubMed

Meissner, H I; Bergner, L; Marconi, K M

1992-01-01

In 1986, the National Cancer Institute began a major grant program to enhance the technical capabilities of public health departments in cancer prevention and control. This effort, commonly referred to as "capacity building" for cancer control, provided funding to support eight State and one local health department. The program focused on developing the knowledge and skills of health department personnel to implement intervention programs in such areas as smoking cessation, diet modification, and breast and cervical cancer screening. The grants ranged from 2 to 5 years in length, with funding of $125,000 to $1.6 million per grant. The total for the program was $7.4 million. While the priorities set for these grants were nominally similar, their capacity building activities in cancer prevention and control evolved into unique interventions reflecting the individual needs and priorities of each State or locality. Their experiences illustrate that technical development for planning, implementing, and evaluating cancer prevention and control programs is a complex process that must occur at multiple levels, regardless of overall approach. Factors found to contribute to successful implementation of technical development programs include* commitment of the organization's leadership to provide adequate support for staff and activities and to keep cancer prevention and control on the organizational agenda,* the existence of appropriate data to monitor and evaluate programs,* appropriately trained staff,* building linkages with State and community agencies and coalitions to guide community action,* an established plan or process for achieving cancer control objectives,* access to the advice of and participation of individual cancer and health experts,* an informed State legislature,* diffusion of cancer prevention and control efforts,and* the ability to obtain funds needed for future activities.

Design of foundations with sliding joint at areas affected with underground mining

NASA Astrophysics Data System (ADS)

Matečková, P.; Šmiřáková, M.; Maňásek, P.

2018-04-01

Underground mining always influences also landscape on surface. If there are buildings on the surface they are affected with terrain deformation which comprises terrain inclination, curvature, shift and horizontal deformation. Ostrava – Karvina region is specific with underground mining very close to densely inhabited area. About 25 years ago there were mines even in the city of Ostrava. Recommendations and rules for design of building structures at areas affected with underground mining have been therefore analysed in long term. This paper is focused on deformation action caused by terrain horizontal deformation - expansion or compression. Through the friction between foundation structure and subsoil in footing bottom the foundation structure has to resist significant normal forces. The idea of sliding joint which eliminates the friction and decreases internal forces comes from the last century. Sliding joint made of asphalt belt has been analysed at Faculty of Civil Engineering, VSB – Technical University of Ostrava in long term. The influence of vertical and horizontal load and the effect of temperature in temperature controlled room have been examined. Testing, design and utilization of sliding joint is presented.

Final Scientific Technical Report Crowder College MARET Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyt, Art; Eberle, Dan; Hudson, Pam

Following decades of success in solar energy projects, the Missouri Legislature designated Crowder College in 1992 as the State's renewable energy education center. The resulting Missouri Alternative and Renewable Energy Technology (MARET) Center is recognized internationally for its contributions to the energy field. The mission of the MARET Center is to expand renewable energy throughout the region with education, applied research, and economic development. Educational programs include certification and transfer degrees encompassing green construction, solar thermal energy, solar electricity, and wind. The MARET Center also assists in new product development and other business support services in renewable energy. The Missourimore » Alternative and Renewable Energy Technology (MARET) Center at Crowder College hopes to eventually develop a 27,500 ft 2 facility as a living laboratory to support solar and other renewable and sustainable energy development through professional degrees, new product development and commercialization, renewable energy business incubation, and consumer education. The primary objective of the current project was to complete Stage One of this building, with solar, wind, and geothermal technologies installed to power its 9,216 ft 2 office, classroom, and research spaces. This MARET Center includes a modular roof structure that permits both solar module mounting and daylighting, PV/thermal hybrid modules pioneered in Crowder Solar Decathlon homes, modular electrical management subsystems; and modular delivery systems for heating and cooling the structure. The MARET Facility will operate as a Net Positive energy building, consistently producing surplus energy for distributed generation on the utility grid. The modular design of the energy systems within the building is to serve as a scalable and repeatable model for a wide variety of building applications and climate zones. As a living laboratory of renewable energy, exploring and validating new applications of solar and other renewable technologies, the MARET Facility will house a wide variety of programs which will advance implementation of renewable energy throughout the region. These program goals include; Curriculum in renewable energy for pre-engineering transfer programs; Certification and degree programs for technical degrees for Energy Efficiency, Wind, Photovoltaic and Solar Thermal professionals; Short courses and workshops for building management and design professionals; Public education and demonstration projects in renewable energy through conferences and K-12 educational outreach; Technical degree offering in building construction incorporating “best practices” for energy efficiency and renewables; and Business incubators for new renewable energy businesses and new product development The new MARET facility will support the mission of the US Department of Energy (DOE) Solar Program, “to improve America’s security, environmental quality, and economic prosperity through public-private partnerships that bring reliable and affordable solar energy technologies to the marketplace,” through a variety of educational and business assistance programs. Further, technical innovations planned for the MARET facility and its applied research activities will advance the Solar Program strategic goals to “reduce the cost of solar energy to the point it becomes competitive in relevant energy markets (e.g., buildings, power plants) and for solar technology to enable a sustainable solar industry.” Overarching Goals relative to program needs, future expansion, flexibility, quality of materials, and construction and operational costs:; Experimental: The structure and systems of the building operate as an educational resource. The systems are meant to be a source for data collection and study for building users and instructors; Educational: Part of the evolution of this building and its ongoing goals is to use the building as an educational tool, one where new ideas developed in the world and especially at Crowder can be tested further as part of MARET's curriculum; LEED Platinum: achieve highest level of LEED certification; Net Zero: The building will utilize existing wind and alternate energy sources on campus and add solar PVT panels and achieve as close as possible to a net zero energy usage; and Phase II: The phase II portion of this project will expand the Internet student area, additional classrooms, and labs, as well as an auditorium and exhibit area.« less

6. SITE BUILDING 002 SCANNER BUILDING AT "A" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. SITE BUILDING 002 - SCANNER BUILDING - AT "A" FACE (ON SOUTH SIDE) LOOKING DIRECTLY UP RADAR SYSTEM EMITTER/ANTENNA ARRAY FACE WITH 65MM WIDE ANGLE LENS. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Lightweight and High-Resolution Single Crystal Silicon Optics for X-ray Astronomy

NASA Technical Reports Server (NTRS)

Zhang, William W.; Biskach, Michael P.; Chan, Kai-Wing; Mazzarella, James R.; McClelland, Ryan S.; Riveros, Raul E.; Saha, Timo T.; Solly, Peter M.

2016-01-01

We describe an approach to building mirror assemblies for next generation X-ray telescopes. It incorporates knowledge and lessons learned from building existing telescopes, including Chandra, XMM-Newton, Suzaku, and NuSTAR, as well as from our direct experience of the last 15 years developing mirror technology for the Constellation-X and International X-ray Observatory mission concepts. This approach combines single crystal silicon and precision polishing, thus has the potential of achieving the highest possible angular resolution with the least possible mass. Moreover, it is simple, consisting of several technical elements that can be developed independently in parallel. Lastly, it is highly amenable to mass production, therefore enabling the making of telescopes of very large photon collecting areas.

Experimental Investigation of Properties of Foam Concrete for Industrial Floors in Testing Field

NASA Astrophysics Data System (ADS)

Vlcek, Jozef; Drusa, Marian; Scherfel, Walter; Sedlar, Bronislav

2017-12-01

Foam concrete (FC), as a mixture of cement, water, additives and technical foam, is well known for more than 30 years. It is building material with good mechanical properties, low thermal conductivity, simple and even high technological treatment. Foam concrete contains closed void pores, what allows achieving low bulk density and spare of raw materials. Thanks to its properties, it is usable as a replacement of conventional subbase layers of the industrial floors, the transport areas or as a part of the foundation structures of the buildings. Paper presents the preparation of the testing field (physical model) which was created for experimental investigation of the foam concrete subbase layer of the industrial floor in a real scale.

Summary record of presentations to the Federal Telecommunication Standards Committee/Fiber optics task group

NASA Astrophysics Data System (ADS)

Hanson, A. G.

1987-03-01

The learning experience of a group of Federal-agency planners who face upgrading or augmenting existing on-premises communication systems and building wiring is documented. In July 1984, an interagency Fiber Optics Task Group was formed under the aegis of the Federal Telecommunication Standards Committee to study on-premises distribution systems, with emphasis on optical fiber implementation, sharing mutual problems and potential solutions for them. Chronological summary records of technical content of 11 Task Group meetings through September 1986 are summarized. Also condensed are the engineering presentations to the Task Group by industry on applicable state-of-the-art technology, including local area networks, private automatic branch exchanges, building wiring architecture, and optic fiber systems and components.

Non-technical skills training to enhance patient safety.

PubMed

Gordon, Morris

2013-06-01

  Patient safety is an increasingly recognised issue in health care. Systems-based and organisational methods of quality improvement, as well as education focusing on key clinical areas, are common, but there are few reports of educational interventions that focus on non-technical skills to address human factor sources of error. A flexible model for non-technical skills training for health care professionals has been designed based on the best available evidence, and with sound theoretical foundations.   Educational sessions to improve non-technical skills in health care have been described before. The descriptions lack the details to allow educators to replicate and innovate further.   A non-technical skills training course that can be delivered as either a half- or full-day intervention has been designed and delivered to a number of mixed groups of undergraduate medical students and doctors in postgraduate training. Participant satisfaction has been high and patient safety attitudes have improved post-intervention.   This non-technical skills educational intervention has been built on a sound evidence base, and is described so as to facilitate replication and dissemination. With the key themes laid out, clinical educators will be able to build interventions focused on numerous clinical issues that pay attention to human factor contributors to safety. © 2013 John Wiley & Sons Ltd.

55. Photocopy of Structural drawing, dated August 6, 1976 by ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

55. Photocopy of Structural drawing, dated August 6, 1976 by Raytheon Company. Original drawing property of United States Air Force, 21" Space Command. S-15 - PAVE PAWS TECHNICAL FACILITY - OTIS AFB - UTILITY BUILDING. DRAWING NO. AW35-46-06 - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

7 CFR Exhibit F to Subpart I of... - Site Option Loan to Technical Assistance Grantees

Code of Federal Regulations, 2011 CFR

2011-01-01

... AGENCY, DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) HOUSING Self-Help Technical... will build their own homes by the self-help method. An SO loan will be considered only when sites... that will be needed as building sites by self-help families participating in the TA self-help housing...

Academic & Technical Skills + Life/Work Skills + Career Information & Guidance = Success in Career Building.

ERIC Educational Resources Information Center

Jarvis, Phillip S.

There has been a renaissance in the thinking about career development. It is becoming accepted that information is not enough; in addition to academic and technical skills, youth and adults need to learn life/work designing and building skills to become healthy, productive, and self-reliant citizens. Despite the fact that Canadian students have…

Amelioration and retrofitting of educational buildings

NASA Astrophysics Data System (ADS)

Casciati, Fabio; Casciati, Sara

2018-01-01

Following a seismic event that occurred years ago in Central Italy, the public opinion was growing and growing a concern on the adequacy of educational buildings all across Italy. This activated several political decisions and a consequent technical effort is in progress. Technically speaking one has to manage the classical problem of retrofitting existing buildings. However, the legal environment goes across national codes, targeted guidelines and the professional need of achieving pragmatic solutions based on ethical and social acceptation schemes.This paper introduces the topic in its worldwide exception and focuses then on some operative aspects in the Italian situation. It outlines the consolidated steps along this technical process and emphasizes the weak aspects one meets when going across the designers' reports.

Decommissioning a phosphoric acid production plant: a radiological protection case study.

PubMed

Stamatis, V; Seferlis, S; Kamenopoulou, V; Potiriadis, C; Koukouliou, V; Kehagia, K; Dagli, C; Georgiadis, S; Camarinopoulos, L

2010-12-01

During a preliminary survey at the area of an abandoned fertilizer plant, increased levels of radioactivity were measured at places, buildings, constructions and materials. The extent of the contamination was determined and the affected areas were characterized as controlled areas. After the quantitative and qualitative determination of the contaminated materials, the decontamination was planned and performed step by step: the contaminated materials were categorized according to their physical characteristics (scrap metals, plastic pipes, scales and residues, building materials, etc) and according to their level of radioactivity. Depending on the material type, different decontamination and disposal options were proposed; the most appropriate technique was chosen taking into account apart from technical issues, the legal framework, radiation protection issues, the opinion of the local authorities involved as well as the owner's wish. After taking away the biggest amount of the contaminated materials, an iterative process consisting of surveys and decontamination actions was performed in order to remove the residual traces of contamination from the area. During the final survey, no residual surface contamination was detected; some sparsely distributed low level contaminated materials deeply immersed into the soil were found and removed. Copyright © 2010 Elsevier Ltd. All rights reserved.

Dane Christensen | NREL

Science.gov Websites

-performance building simulation. Dane supports technical efforts for the Building America Program and conducts finite element modeling for building energy simulation. Prior to joining NREL, Dane worked at Atec, Inc

Deployment Area Selection and Land Withdrawal/Acquisition. M-X/MPS (M-X/Multiple Protective Shelter) Environmental Technical Report. Native Americans Nevada/Utah.

DTIC Science & Technology

1981-10-02

Northern Paiute, Shoshone, Ute, and Southern Paiute peoples developed solutions to natural limitations based upon botanical and zoological expertise and...Land Management and the Forest Service. Other Land-based Activities (3.1.5.2.2) The tribe intends to build a hydroponic greenhouse which will utilize the...other development goals--notably the development of a hydroponic greenhouse utilizing flow from natural wdrm springs on the reservation, and development

Haiti: Feasibility of Waste-to-Energy Options at the Trutier Waste Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conrad, M. D.; Hunsberger, R.; Ness, J. E.

2014-08-01

This report provides further analysis of the feasibility of a waste-to-energy (WTE) facility in the area near Port-au-Prince, Haiti. NREL's previous analysis and reports identified anaerobic digestion (AD) as the optimal WTE technology at the facility. Building on the prior analyses, this report evaluates the conceptual financial and technical viability of implementing a combined waste management and electrical power production strategy by constructing a WTE facility at the existing Trutier waste site north of Port-au-Prince.

9. SITE BUILDING 002 SCANNER BUILDING LOOKING AT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. SITE BUILDING 002 - SCANNER BUILDING - LOOKING AT "C" FACE RADAR SYSTEM EMITTER/ANTENNA. VIEW IS LOOKING SOUTH 30° EAST (NOTE: "C" FACE NOT IN USE AT FACILITY). - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

34. SITE BUILDING 002 SCANNER BUILDING ROOM 105 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

34. SITE BUILDING 002 - SCANNER BUILDING - ROOM 105 - CHILLER ROOM, SHOWING SINGLE COMPRESSOR, LIQUID CHILLERS AND "CHILLED WATER RETURN", COOLING TOWER 'TOWER WATER RETURN" AND 'TOWER WATER SUPPLY" LINES. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

25. SITE BUILDING 002 SCANNER BUILDING OPERATIONS CENTER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. SITE BUILDING 002 - SCANNER BUILDING - OPERATIONS CENTER - MWOC IN OPERATION AT 1930 ZULU TIME, 26 OCTOBER, 1999. MWOC SCREEN ALSO SHOWS RADAR "FACE A" AND "FACE B" ACTIVE STATUS. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

29. SITE BUILDING 002 SCANNER BUILDING FLOOR 3A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

29. SITE BUILDING 002 - SCANNER BUILDING - FLOOR 3A ("A" FACE) AT SYSTEM LAYOUT GRID 17. GENERAL OBLIQUE VIEW OF "A" FACE INTERIOR SHOWING RADAR EMITTER/ANTENNA INTERFACE ELECTRONICS. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

10. SITE BUILDING 002 SCANNER BUILDING LOOKING AT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. SITE BUILDING 002 - SCANNER BUILDING - LOOKING AT SOUTHWEST CORNER "B" FACE AND "C" FACE ON WEST AND EVAPORATIVE COOLING TOWER AT NORTH. VIEW IS LOOKING NORTH 45° EAST. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

19. SITE BUILDING 002 SCANNER BUILDING AIR POLICE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. SITE BUILDING 002 - SCANNER BUILDING - AIR POLICE SITE SECURITY OFFICE WITH "SITE PERIMETER STATUS PANEL" AND REAL TIME VIDEO DISPLAY OUTPUT FROM VIDEO CAMERA SYSTEM AT SECURITY FENCE LOCATIONS. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Engineering Change Management Method Framework in Mechanical Engineering

NASA Astrophysics Data System (ADS)

Stekolschik, Alexander

2016-11-01

Engineering changes make an impact on different process chains in and outside the company, and lead to most error costs and time shifts. In fact, 30 to 50 per cent of development costs result from technical changes. Controlling engineering change processes can help us to avoid errors and risks, and contribute to cost optimization and a shorter time to market. This paper presents a method framework for controlling engineering changes at mechanical engineering companies. The developed classification of engineering changes and accordingly process requirements build the basis for the method framework. The developed method framework comprises two main areas: special data objects managed in different engineering IT tools and process framework. Objects from both areas are building blocks that can be selected to the overall business process based on the engineering process type and change classification. The process framework contains steps for the creation of change objects (both for overall change and for parts), change implementation, and release. Companies can select singleprocess building blocks from the framework, depending on the product development process and change impact. The developed change framework has been implemented at a division (10,000 employees) of a big German mechanical engineering company.

Technical Support Document: Development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings - 50% Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonnema, E.; Leach, M.; Pless, S.

2013-06-01

This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-MBBR) ASHRAE et al. (2011b). The AEDG-MBBR is intended to provide recommendations for achieving 50% whole-building energy savings in retail stores over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-MBBR was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), themore » Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy.« less

Technical Support Document: Development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings - 50% Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonnema, Eric; Leach, Matt; Pless, Shanti

2013-06-05

This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-MBBR) ASHRAE et al. (2011b). The AEDG-MBBR is intended to provide recommendations for achieving 50% whole-building energy savings in retail stores over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-MBBR was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), themore » Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy.« less

Energy Conservation: A Management Report for State and Local Governments and A Technical Guide for State and Local Governments.

ERIC Educational Resources Information Center

Public Technology, Inc., Washington, DC.

This technical guide is part of a packet of tools designed to assist state or local government practitioners in organizing and managing an energy conservation program. It gives information on adapting energy conservation methods to existing public buildings and on designing new public buildings with energy conservation in mind. It also discusses…

2011 Residential Energy Efficiency Technical Update Meeting Summary Report: Denver, Colorado - August 9-11, 2011

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report provides an overview of the U.S. Department of Energy Building America program's Summer 2011 Residential Energy Efficiency Technical Update Meeting. This meeting was held on August 9-11, 2011, in Denver, Colorado, and brought together more than 290 professionals representing organizations with a vested interest in energy efficiency improvements in residential buildings.

117. Back side technical facilities S.R. radar transmitter & computer ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

117. Back side technical facilities S.R. radar transmitter & computer building no. 102, "building sections - sheet I" - architectural, AS-BLT AW 35-46-04, sheet 12, dated 23 January, 1961. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

118. Back side technical facilities S.R. radar transmitter & computer ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

118. Back side technical facilities S.R. radar transmitter & computer building no. 102, "building sections - sheet I" - architectural, AS-BLT AW 35-46-04, sheet 13, dated 23 January, 1961. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

City-integrated renewable energy for urban sustainability.

PubMed

Kammen, Daniel M; Sunter, Deborah A

2016-05-20

To prepare for an urban influx of 2.5 billion people by 2050, it is critical to create cities that are low-carbon, resilient, and livable. Cities not only contribute to global climate change by emitting the majority of anthropogenic greenhouse gases but also are particularly vulnerable to the effects of climate change and extreme weather. We explore options for establishing sustainable energy systems by reducing energy consumption, particularly in the buildings and transportation sectors, and providing robust, decentralized, and renewable energy sources. Through technical advancements in power density, city-integrated renewable energy will be better suited to satisfy the high-energy demands of growing urban areas. Several economic, technical, behavioral, and political challenges need to be overcome for innovation to improve urban sustainability. Copyright © 2016, American Association for the Advancement of Science.

Aviation Particle Emissions Workshop

NASA Technical Reports Server (NTRS)

Wey, Chowen C. (Editor)

2004-01-01

The Aviation Particle Emissions Workshop was held on November 18 19, 2003, in Cleveland, Ohio. It was sponsored by the National Aeronautic and Space Administration (NASA) under the Vehicle Systems Program (VSP) and the Ultra- Efficient Engine Technology (UEET) Project. The objectives were to build a sound foundation for a comprehensive particulate research roadmap and to provide a forum for discussion among U.S. stakeholders and researchers. Presentations included perspectives from the Federal Aviation Administration, the U.S. Environmental Protection Agency, NASA, and United States airports. There were five interactive technical sessions: sampling methodology, measurement methodology, particle modeling, database, inventory and test venue, and air quality. Each group presented technical issues which generated excellent discussion. The five session leads collaborated with their members to present summaries and conclusions to each content area.

8 March 2010 Elazığ-Kovancilar (Turkey) Earthquake: observations on ground motions and building damage

USGS Publications Warehouse

Akkar, Sinan; Aldemir, A.; Askan, A.; Bakir, S.; Canbay, E.; Demirel, I.O.; Erberik, M.A.; Gulerce, Z.; Gulkan, Polat; Kalkan, Erol; Prakash, S.; Sandikkaya, M.A.; Sevilgen, V.; Ugurhan, B.; Yenier, E.

2011-01-01

An earthquake of MW = 6.1 occurred in the Elazığ region of eastern Turkey on 8 March 2010 at 02:32:34 UTC. The United States Geological Survey (USGS) reported the epicenter of the earthquake as 38.873°N-39.981°E with a focal depth of 12 km. Forty-two people lost their lives and 137 were injured during the event. The earthquake was reported to be on the left-lateral strike-slip east Anatolian fault (EAF), which is one of the two major active fault systems in Turkey. Teams from the Earthquake Engineering Research Center of the Middle East Technical University (EERC-METU) visited the earthquake area in the aftermath of the mainshock. Their reconnaissance observations were combined with interpretations of recorded ground motions for completeness. This article summarizes observations on building and ground damage in the area and provides a discussion of the recorded motions. No significant observations in terms of geotechnical engineering were made.

Comparison of Two Surface Contamination Sampling Techniques Conducted for the Characterization of Two Pajarito Site Manhattan Project National Historic Park Properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lopez, Tammy Ann

Technical Area-18 (TA-18), also known as Pajarito Site, is located on Los Alamos National Laboratory property and has historic buildings that will be included in the Manhattan Project National Historic Park. Characterization studies of metal contamination were needed in two of the four buildings that are on the historic registry in this area, a “battleship” bunker building (TA-18-0002) and the Pond cabin (TA-18-0029). However, these two buildings have been exposed to the elements, are decades old, and have porous and rough surfaces (wood and concrete). Due to these conditions, it was questioned whether standard wipe sampling would be adequate tomore » detect surface dust metal contamination in these buildings. Thus, micro-vacuum and surface wet wipe sampling techniques were performed side-by-side at both buildings and results were compared statistically. A two-tail paired t-test revealed that the micro-vacuum and wet wipe techniques were statistically different for both buildings. Further mathematical analysis revealed that the wet wipe technique picked up more metals from the surface than the microvacuum technique. Wet wipes revealed concentrations of beryllium and lead above internal housekeeping limits; however, using an yttrium normalization method with linear regression analysis between beryllium and yttrium revealed a correlation indicating that the beryllium levels were likely due to background and not operational contamination. PPE and administrative controls were implemented for National Park Service (NPS) and Department of Energy (DOE) tours as a result of this study. Overall, this study indicates that the micro-vacuum technique may not be an efficient technique to sample for metal dust contamination.« less

Climatic zoning for the calculation of the thermal demand of buildings in Extremadura (Spain)

NASA Astrophysics Data System (ADS)

Moral, Francisco J.; Pulido, Elena; Ruíz, Antonio; López, Fernando

2017-08-01

The present work reports on a methodology to assess the climatic severity of a particular geographic region as compared to specific information available in the current regulations. The viability for each of the 387 municipalities in the Autonomous Community of Extremadura (Spain) is analysed, making a distinction between those with reliable climate reports and those for which no such information is available. In the case study, although the weather conditions in Extremadura are quite homogeneous according to the Spanish Technical Building Code (STBC 2015) classification and most areas are associated to zone C4 (soft winters and hot summers), the southern area in the region is associated to zone D1, similar to the north of Spain, where winters and summers are cool, which does not coincide with the actual climate in the south of Extremadura. The general climatic homogeneity in Extremadura was also highlighted with the new procedure, predominating zone C4, but unexpected or unreal climatic zoning was not generated, giving place to a consistent spatial distribution of zones throughout the region. Consequently, the proposed method allows a more accurate climatic zoning of any region in agreement with the Spanish legislation on energy efficiency in buildings, which would enhance the setting of thermal demand rates according to the actual climatic characterisation of the area in which a particular municipality is located.

45 CFR 2533.10 - Eligible activities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SERVICE TECHNICAL ASSISTANCE, TRAINING, AND OTHER SERVICE INFRASTRUCTURE-BUILDING ACTIVITIES § 2533.10... training and technical assistance and other assistance to project sponsors and other community-based... will provide training and technical assistance, where necessary, to individuals, programs, local labor...

26. SITE BUILDING 002 SCANNER BUILDING OPERATIONS CENTER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. SITE BUILDING 002 - SCANNER BUILDING - OPERATIONS CENTER - MWOC IN OPERATION AT 1945 ZULU TIME, 26 OCTOBER, 1999. "SPACE TRACK BOARD" DATA SHOWING ITEMS #16609 MIR (RUSSIA) AND #25544 ISS (INTERNATIONAL SPACE STATION) BEING TRACKED. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

21. SITE BUILDING 002 SCANNER BUILDING LOOKING AT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. SITE BUILDING 002 - SCANNER BUILDING - LOOKING AT DISC STORAGE SYSTEMS A AND B (A OR B ARE REDUNDANT SYSTEMS), ONE MAINFRAME COMPUTER ON LINE, ONE ON STANDBY WITH STORAGE TAPE, ONE ON STANDBY WITHOUT TAPE INSTALLED. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Commercial Building Energy Asset Score System: Program Overview and Technical Protocol (Version 1.0)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Na; Gorrissen, Willy J.

2013-01-11

The U.S. Department of Energy (DOE) is developing a national voluntary energy asset score system that includes an energy asset score tool to help building owners evaluate their buildings with respect to the score system. The goal of the energy asset score system is to facilitate cost-effective investment in energy efficiency improvements of commercial buildings. The system will allow building owners and managers to compare their building infrastructure against peers and track building upgrade progress over time. The system can also help other building stakeholders (e.g., building operators, tenants, financiers, and appraisers) understand the relative efficiency of different buildings inmore » a way that is independent from their operations and occupancy. This report outlines the technical protocol used to generate the energy asset score, explains the scoring methodology, and provides additional details regarding the energy asset score tool. This report also describes alternative methods that were considered prior to developing the current approach. Finally, this report describes a few features of the program where alternative approaches are still under evaluation.« less

High-performance commercial building systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Selkowitz, Stephen

2003-10-01

This report summarizes key technical accomplishments resulting from the three year PIER-funded R&D program, ''High Performance Commercial Building Systems'' (HPCBS). The program targets the commercial building sector in California, an end-use sector that accounts for about one-third of all California electricity consumption and an even larger fraction of peak demand, at a cost of over $10B/year. Commercial buildings also have a major impact on occupant health, comfort and productivity. Building design and operations practices that influence energy use are deeply engrained in a fragmented, risk-averse industry that is slow to change. Although California's aggressive standards efforts have resulted in newmore » buildings designed to use less energy than those constructed 20 years ago, the actual savings realized are still well below technical and economic potentials. The broad goal of this program is to develop and deploy a set of energy-saving technologies, strategies, and techniques, and improve processes for designing, commissioning, and operating commercial buildings, while improving health, comfort, and performance of occupants, all in a manner consistent with sound economic investment practices. Results are to be broadly applicable to the commercial sector for different building sizes and types, e.g. offices and schools, for different classes of ownership, both public and private, and for owner-occupied as well as speculative buildings. The program aims to facilitate significant electricity use savings in the California commercial sector by 2015, while assuring that these savings are affordable and promote high quality indoor environments. The five linked technical program elements contain 14 projects with 41 distinct R&D tasks. Collectively they form a comprehensive Research, Development, and Demonstration (RD&D) program with the potential to capture large savings in the commercial building sector, providing significant economic benefits to building owners and health and performance benefits to occupants. At the same time this program can strengthen the growing energy efficiency industry in California by providing new jobs and growth opportunities for companies providing the technology, systems, software, design, and building services to the commercial sector. The broad objectives across all five program elements were: (1) To develop and deploy an integrated set of tools and techniques to support the design and operation of energy-efficient commercial buildings; (2) To develop open software specifications for a building data model that will support the interoperability of these tools throughout the building life-cycle; (3) To create new technology options (hardware and controls) for substantially reducing controllable lighting, envelope, and cooling loads in buildings; (4) To create and implement a new generation of diagnostic techniques so that commissioning and efficient building operations can be accomplished reliably and cost effectively and provide sustained energy savings; (5) To enhance the health, comfort and performance of building occupants. (6) To provide the information technology infrastructure for owners to minimize their energy costs and manage their energy information in a manner that creates added value for their buildings as the commercial sector transitions to an era of deregulated utility markets, distributed generation, and changing business practices. Our ultimate goal is for our R&D effort to have measurable market impact. This requires that the research tasks be carried out with a variety of connections to key market actors or trends so that they are recognized as relevant and useful and can be adopted by expected users. While some of this activity is directly integrated into our research tasks, the handoff from ''market-connected R&D'' to ''field deployment'' is still an art as well as a science and in many areas requires resources and a timeframe well beyond the scope of this PIER research program. The TAGs, PAC and other industry partners have assisted directly in this effort by reviewing and critiquing work to date, and by partnering in activities that advance results toward market impacts. The goals, objectives and key accomplishments of each technical program element and projects are described in the sections that follow. For each project we then summarize the Task Approach, the Outcomes of each task, and our Conclusions and Recommendations. We also provide a list and short summary of each significant research product e.g. report, prototype, software, standard, etc.« less

Teaching Sustainable Design Using BIM and Project-Based Energy Simulations

ERIC Educational Resources Information Center

Shen, Zhigang; Jensen, Wayne; Wentz, Timothy; Fischer, Bruce

2012-01-01

The cross-disciplinary nature of energy-efficient building design has created many challenges for architecture, engineering and construction instructors. One of the technical challenges in teaching sustainable building design is enabling students to quantitatively understand how different building designs affect a building's energy performance.…

Building Science-Relevant Literacy with Technical Writing in High School

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

2006-06-02

By drawing on the in-class work of an on-going literacy outreach project, this paper explains how well-chosen technical writing activities can earn time in high-school science courses by enabling underperforming students (including ESL students) to learn science more effectively. We adapted basic research-based text-design and usability techniques into age-appropriate exercises and cases using the cognitive apprenticeship approach. This enabled high-school students, aided by explicit guidelines, to build their cognitive maturity, learn how to craft good instructions and descriptions, and apply those skills to better note taking and technical talks in their science classes.

36. SITE BUILDING 004 ELECTRIC POWER STATION CLOSE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

36. SITE BUILDING 004 - ELECTRIC POWER STATION - CLOSE UP VIEW OF 1200 HORSEPOWER STANDBY POWER DIESEL ENGINE/GENERATOR SETS. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

37. SITE BUILDING 004 ELECTRIC POWER STATION ELEVATED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

37. SITE BUILDING 004 - ELECTRIC POWER STATION - ELEVATED VIEW OF FIVE (5) 1200 HORSEPOWER STANDBY - POWER DIESEL ENGINE/GENERATOR SETS. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

BUILDING "BRIDGES" WITH QUALITY ASSURANCE

EPA Science Inventory

The papr describes how, rather than building "bridges" across centuries, quality assurance (QA) personnel have the opportunity to build bridges across technical disciplines, between public and private organizations, and between different QA groups. As reviewers and auditors of a...

Implementation of quality improvement techniques for management and technical processes in the ACRV project

NASA Technical Reports Server (NTRS)

Raiman, Laura B.

1992-01-01

Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

Implementation of quality improvement techniques for management and technical processes in the ACRV project

NASA Astrophysics Data System (ADS)

Raiman, Laura B.

1992-12-01

Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

Impact of Fire Ventilation on General Ventilation in the Building

NASA Astrophysics Data System (ADS)

Zender-Świercz, Ewa; Telejko, Marek

2017-10-01

The fire of building is a threat to its users. The biggest threat is generation, during lifetime of fire, hot gases and smoke. The purpose of quick and efficient evacuation from the area covered by the fire, at first step the escape routes have to be secured from smokiness. The smoke ventilation systems are used for this purpose. The proper design and execution of smoke ventilation is important not only because of the safety, but also of the maintenance of comfort in the building at a time when there is no fire. The manuscript presents the effect of incorrectly realized smoke ventilation in the stairwell of the medium building. The analysis shows that the flaps of smoke ventilation located in the stairwell may have a significant impact on the proper functioning of mechanical ventilation in the period when there is no fire. The improperly installed or incorrect insulated components cause perturbation of air flow and they change pressure distribution in the building. The conclusion of the analysis is the need to include the entire technical equipment of the building during the design and realization of its individual elements. The impact of various installations at each other is very important, and the omission of any of them can cause disturbances in the proper work of another.

Public Flat in Indonesia, Their Role in Highly Densed City: Legal Aspect Review and Prototype Assessment

NASA Astrophysics Data System (ADS)

Paramita, Beta; Perdana Khidmat, Rendy; Fukuda, Hiroatsu

2018-05-01

An affordable vertical house, which is known as rusun in Indonesian term becomes the utopia of a compact city. The rusun to be the main actor contributing to the creation of liveable comfort in dense areas by relocating squatters and slum inhabitants to better living places. Technical guidelines and building standards play a major role in a building’s environmental impact. These standards will be reviewed based on their impact on building performance. There are two prototypes of rusun referenced in 05/PRT/M/2007, and the assessment of these prototypes has been done by using ENVi-met. The meteorological data for the ENVI-met configuration input is adapted to the same weather and climate conditions taken from the data measured on June 13th, 2012. The analysis of this assessment will focus on building orientation, building length, building height, and also the microclimate which is impacted by these prototypes. Based on the assessment, it is recommended that the layout of outdoor space on the north side should provide as much green coverage as possible, either for shadowing or for the benefit of its albedo. The simulation shows that building ratio of 1:3 produces higher wind speed, which also controls air temperature and humidity.

Building, Maintaining, and Ending Relationships: An Urban School District and a Technical Assistance Team. Documentation and Technical Assistance in Urban Schools.

ERIC Educational Resources Information Center

Holmes, Manford L.

This paper describes the nature of the relationships developed between the technical assistance team of the Documentation and Technical Assistance (DTA) Project and members of a Chicago (Illinois) school district staff with whom the DTA worked. First, the methodology with which the technical assistance work was studied is described, as is the…

Project SAGE: solar assisted gas energy. Final report and executive summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Phase III basic objective was establishment of a technical and economic baseline for proper assessment of the practical potential of solar water heating for apartments. Plans can then be formulated to improve SAGE technical design and performance; reduce SAGE costs; refine SAGE market assessment; and identify policies to encourage the use of SAGE. Two SAGE water heating systems were installed and tested. One system was retrofit onto an existing apartment building; the other was installed in a new apartment building. Each installation required approximately 1000 square feet of collector area tilted to an angle of 37/sup 0/ from themore » horizontal, and each was designed to supply about 70 percent of the energy for heating water for approximately 32 to 40 units of a typical two-story apartment complex in Southern California. Actual contruction costs were carefully compiled, and both installations were equipped with performance monitoring equipment. In addition, the operating and maintenance requirements of each installation was evaluated by gas company maintenance engineers. Upon completion of the installation analysis, the SAGE installation cost was further refined by obtaining firm SAGE construction bids from two plumbing contractors in Southern California. Market penetration was assessed by developing a computer simulation program using the technical and economic analysis from the installation experience. Also, the project examined the public policies required to encourage SAGE and other solar energy options. Results are presented and discussed. (WHK)« less

Building America FY 2016 Annual Report: Building America Is Driving Real Solutions in the Race to Zero Energy Homes -- Appendix

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrar, Sara; Rothgeb, Stacey; Polly, Ben

This document is a set of appendices presenting technical discussion and references as a companion to the 'Building America FY 2016 Annual Report: Building America Is Driving Real Solutions in the Race to Zero Energy Homes' publication.

Solar Heating and Cooling of Buildings: Phase 0. Feasibility and Planning Study. Volume 1: Executive Summary. Document No. 74SD419. Final Report.

ERIC Educational Resources Information Center

General Electric Co., Philadelphia, PA. Space Div.

The purpose of this study was to establish the technical and economic feasibility of using solar energy for the heating and cooling of buildings and to provide baseline information for the widespread application of solar energy. The initial step in this program was a study of the technical, economic, societal, legal, and environmental factors…

Building Professional and Technical Skills in the Use of Earth Observations through the NASA DEVELOP National Program: Best Practices & Lessons Learned

NASA Astrophysics Data System (ADS)

Crepps, G.; Ross, K. W.; Childs-Gleason, L. M.; Allsbrook, K. N.; Rogers, L.; Ruiz, M. L.; Clayton, A.

2017-12-01

The NASA DEVELOP National Program offers 10-week research opportunities to participants to work on rapid feasibility projects utilizing NASA Earth observations in a variety of applications, including ecological forecasting, water resources, disasters, and health and air quality. DEVELOP offers a unique collaborative environment in which students, recent graduates, and transitioning career professionals are placed on interdisciplinary teams to conduct projects. DEVELOP offers a variety of opportunities and resources to build participants technical skills in remote sensing and GIS, as well as interpersonal and leadership skills. As a capacity building program, DEVELOP assesses participants' growth by using entrance and exit personal growth assessments, as well as gathering general program feedback through an exit survey. All of this information is fed back into the program for continual improvement. DEVELOP also offers a progression of opportunities through which participants can advance through the program, allowing participants to build a diverse set of technical and leadership skills. This presentation will explore best practices including the use of pre- and post-growth assessments, offering advanced leadership opportunities, and overall capacity building impacts on participants.

35. SITE BUILDING 004 ELECTRIC POWER STATION CONTROL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

35. SITE BUILDING 004 - ELECTRIC POWER STATION - CONTROL ROOM OF ELECTRIC POWER STATION WITH DIESEL ENGINE POWERED ELECTRIC GENERATION EQUIPMENT IN BACKGROUND. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

38. SITE BUILDING 004 ELECTRIC POWER STATION AT INTERIOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

38. SITE BUILDING 004 - ELECTRIC POWER STATION AT INTERIOR - OBLIQUE VIEW AT FLOOR LEVEL SHOWING DIESEL ENGINE/GENERATOR SET NUMBER 5. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Los Alamos County Fire Department LAFD: TA-55 PF-4 Facility Familiarization Tour, OJT 55260

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rutherford, Victor Stephen

Los Alamos National Laboratory (LANL) will conduct familiarization tours for Los Alamos County Fire Department (LAFD) personnel at the Plutonium Facility (PF-4) at Technical Area (TA)-55. These familiarization tours are official LANL business; the purpose of these tours is to orient the firefighters to the facility so that they can respond efficiently and quickly to a variety of emergency situations. This orientation includes the ingress and egress of the area and buildings, layout and organization of the facility, evacuation procedures and assembly points, and areas of concern within the various buildings at the facility. LAFD firefighters have the skills andmore » abilities to perform firefighting operations and other emergency response tasks that cannot be provided by other LANL personnel who have the required clearance level. This handout provides details of the information, along with maps and diagrams, to be presented during the familiarization tours. The handout will be distributed to the trainees at the time of the tour. A corresponding checklist will also be used as guidance during the familiarization tours to ensure that all required information is presented to LAFD personnel.« less

Rooftop Energy Potential of Low Income Communities in America REPLICA

DOE Data Explorer

Mooney, Meghan (ORCID:0000000309406958); Sigrin, Ben

1970-01-01

The Rooftop Energy Potential of Low Income Communities in America REPLICA data set provides estimates of residential rooftop solar technical potential at the tract-level with emphasis on estimates for Low and Moderate Income LMI populations. In addition to technical potential REPLICA is comprised of 10 additional datasets at the tract-level to provide socio-demographic and market context. The model year vintage of REPLICA is 2015. The LMI solar potential estimates are made at the tract level grouped by Area Median Income AMI income tenure and building type. These estimates are based off of LiDAR data of 128 metropolitan areas statistical modeling and ACS 2011-2015 demographic data. The remaining datasets are supplemental datasets that can be used in conjunction with the technical potential data for general LMI solar analysis planning and policy making. The core dataset is a wide-format CSV file seeds_ii_replica.csv that can be tagged to a tract geometry using the GEOID or GISJOIN fields. In addition users can download geographic shapefiles for the main or supplemental datasets. This dataset was generated as part of the larger NREL-led SEEDSII Solar Energy Evolution and Diffusion Studies project and specifically for the NREL technical report titled Rooftop Solar Technical Potential for Low-to-Moderate Income Households in the United States by Sigrin and Mooney 2018. This dataset is intended to give researchers planners advocates and policy-makers access to credible data to analyze low-income solar issues and potentially perform cost-benefit analysis for program design. To explore the data in an interactive web mapping environment use the NREL SolarForAll app.

15. SITE BUILDING 004 ELECTRIC POWER STATION VIEW ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. SITE BUILDING 004 - ELECTRIC POWER STATION - VIEW IS LOOKING SOUTH 55° EAST AT FIVE DIESEL ENGINE/ GENERATOR SILENCER SYSTEM EXHAUST STACKS. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Improving the delivery of veterinary services in India.

PubMed

Rao, S V N; Rasheed Sulaiman, V; Natchimuthu, K; Ramkumar, S; Sasidhar, P V K

2015-12-01

In pursuit of effective veterinary service delivery, the objectives of this study were threefold: (i) reduce the shortage of technical personnel in veterinary universities (VUs) and animal husbandry departments (AHDs), (ii) identify collaborative areas between VUs and AHDs, and (iii) build the capacity of the veterinary and animal husbandry sector. Primary data were collected from all the 16 veterinary colleges and AHDs in five south Indian states on: (i) student intake and the out-turn of veterinary graduates, (ii) technical personnel--existing and required at various levels, (iii) specific areas of collaboration where VUs and AHDs need each other and can extend support to each other, and (iv) areas in which university faculty and field veterinarians would benefit from further training. Two focus group discussions were held with top administrators of VUs and AHDs to collect qualitative data. The results revealed that there are not enough veterinary graduates to meet the needs of the system and that there is a shortage of faculty, field veterinarians and para-veterinarians. Both focus groups identified areas for collaboration and capacity building to improve veterinary service delivery. The results conclusively demonstrated that India's veterinary service delivery is constrained, not due to a lack of organisations or programmes, but due to the inability of the organisations to collaborate with each other. To improve the effectiveness of veterinary service delivery it will be necessary to: admit more graduate students, support the establishment of new colleges; recruit faculty, field veterinarians and para-veterinarians; remandate the Directorates of Extension at VUs to develop linkages with AHDs; allocate funds ('special central grants') for infrastructure development to all AHDs and veterinary colleges; establish one model veterinary college that follows international standards on veterinary education and create four regional academic staff training colleges exclusively for the purpose of developing the capacity of the veterinary and animal husbandry sector. Action plans to implement these recommendations are also suggested.

Chemical, Biological, Radiological, and Nuclear Consequence Management

EPA Pesticide Factsheets

The Chemical, Biological, Radiological, and Nuclear CMAD provides scientific support and technical expertise for decontamination of buildings, building contents, public infrastructure, agriculture, and associated environmental media.

Building Blocks for Sustainable Communities: Assistance from Grantees

EPA Pesticide Factsheets

EPA awarded Building Blocks for Sustainable Communities grants to four nonprofit organizations with extensive expertise in community sustainability. These organizations deliver technical assistance to communities.

Engineering properties of douglas-fir lumber reclaimed from deconstructed buildings

Treesearch

Robert Falk; Derek Maul; Steven Cramer; James Evans; Victoria Herian

2008-01-01

A vast wood resource exists in our Nation's wood-framed building infrastructure. As the buildings in this infrastructure age and are remodeled or removed for redevelopment, the wood framing residing in these buildings has the potential to be recovered for reuse. However, little technical information exists on the residual engineering properties of reclaimed...

45. CAPE COD AIR STATION PAVE PAWS FACILITY BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

45. CAPE COD AIR STATION PAVE PAWS FACILITY - BUILDING ELEVATION VIEW WITH BUILDING METAL SIDING BEING APPLIED ON "A" FACE (LEFT) AND "B" FACE (RIGHT). NOTE THAT NORTH IS GENERALLY TO RIGHT OF VIEW. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

'Buildings in Use' Study. Field Tests Manual.

ERIC Educational Resources Information Center

Wisconsin Univ., Milwaukee. School of Architecture and Urban Planning.

This report is one product of the 'Buildings in Use' study. The overall study examines architectural attributes of existing buildings in order to determine how they have performed technically and functionally, and the relationship between the environment of the building and the behavior of its user population. Four elementary schools in Columbus,…

The requirements for implementing Sustainable Development Goals (SDGs) and for planning and implementing Integrated Territorial Investments (ITI) in mining areas

NASA Astrophysics Data System (ADS)

Florkowska, Lucyna; Bryt-Nitarska, Izabela

2018-04-01

The notion of Integrated Territorial Investments (ITI) appears more and more frequently in contemporary regional development strategies. Formulating the main assumptions of ITI is a response to a growing need for a co-ordinated, multi-dimensional regional development suitable for the characteristics of a given area. Activities are mainly aimed at improving people's quality of life with their significant participation. These activities include implementing the Sustainable development Goals (SDGs). Territorial investments include, among others, projects in areas where land and building use is governed not only by general regulations (Spatial Planning and Land Development Act) but also by separate legal acts. This issue also concerns areas with active mines and post-mining areas undergoing revitalization. For the areas specified above land development and in particular making building investments is subject to the requirements set forth in the Geological and Mining Law and in the general regulations. In practice this means that factors connected with the present and future mining impacts must be taken into consideration in planning the investment process. This article discusses the role of proper assessment of local geological conditions as well as the current and future mining situation in the context of proper planning and performance of the Integrated Territorial Investment programme and also in the context of implementing the SDGs. It also describes the technical and legislative factors which need to be taken into consideration in areas where mining is planned or where it took place in the past.

2D and 3D GPR imaging of structural ceilings in historic and existing constructions

NASA Astrophysics Data System (ADS)

Colla, Camilla

2014-05-01

GPR applications in civil engineering are to date quite diversified. With respect to civil constructions and monumental buildings, detection of voids, cavities, layering in structural elements, variation of geometry, of moisture content, of materials, areas of decay, defects, cracks have been reported in timber, concrete and masonry elements. Nonetheless, many more fields of investigation remain unexplored. This contribution gives an account of a variety of examples of structural ceilings investigation by GPR radar in reflection mode, either as 2D or 3D data acquisition and visualisation. Ceilings have a pre-eminent role in buildings as they contribute to a good structural behaviour of the construction. Primarily, the following functions can be listed for ceilings: a) they carry vertical dead and live loads on floors and distribute such loads to the vertical walls; b) they oppose to external horizontal forces such as wind loads and earthquakes helping to transfer such forces from the loaded element to the other walls; c) they contribute to create the box skeleton and behaviour of a building, connecting the different load bearing walls and reducing the slenderness and flexural instability of such walls. Therefore, knowing how ceilings are made in specific buildings is of paramount importance for architects and structural engineers. According to the type of building and age of construction, ceilings may present very different solutions and materials. Moreover, in existing constructions, ceilings may have been substituted, modified or strengthened due to material decay or to change of use of the building. These alterations may often go unrecorded in technical documentation or technical drawings may be unavailable. In many cases, the position, orientation and number of the load carrying elements in ceilings may be hidden or not be in sight, due for example to the presence of false ceilings or to technical plants. GPR radar can constitute a very useful tool for investigating with rapidity and high resolution, thin as well as very thick ceilings, in a non-destructive manner. Ceilings may be made up as masonry vaults or timber/metal/concrete beams and elements laid down in one or two directions or, again, can be made as a combination of the above. A number of cases are here presented reporting on typical features to be recognised in radargrams in order to distinguish the material and possible shape of the relevant objects with the aim of providing a first small catalogue useful to the radar user and to professionals. This abstract is of interest for COST Action TU1208.

COMMUNITY CAPACITY BUILDING FOR REVITALIZATION AND SUSTAINABLE REDEVELOPMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Downing, Melinda; Rosenthall, John; Hudson, Michelle

2003-02-27

Capacity building programs help poor and disadvantaged communities to improve their ability to participate in the environmental decision-making processes. They encourage citizen involvement, and provide the tools that enable them to do so. Capacity building enables communities that would otherwise be excluded to participate in the process, leading to better, and more just decisions. The Department of Energy (DOE) continues to be committed to promoting environmental justice and involving its stakeholders more directly in the planning and decision-making process for environmental cleanup. DOE's Environmental Management Program (EM) is in full support of this commitment. Through its environmental justice project, EMmore » provides communities with the capacity to effectively contribute to a complex technical decision-making process by furnishing access to computers, the Internet, training and technical assistance. DOE's Dr. Samuel P. Massie Chairs of Excellence Program (Massie Chairs) function as technical advisors to many of these community projects. The Massie Chairs consist of nationally and internationally recognized engineers and scientists from nine Historically Black Colleges and Universities (HBCUs) and one Hispanic Serving Institution (HIS). This paper will discuss capacity building initiatives in various jurisdictions.« less

INDEPENDENT TECHNICAL REVIEW OF THE FOCUSED FEASIBILITY STUDY AND PROPOSED PLAN FOR DESIGNATED SOLID WASTE MANAGEMENT UNITS CONTRIBUTING TO THE SOUTHWEST GROUNDWATER PLUME AT THE PADUCAH GASEOUS DIFFUSION PLANT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Looney, B.; Eddy-Dilek, C.; Amidon, M.

2011-05-31

The U. S. Department of Energy (DOE) is currently developing a Proposed Plan (PP) for remediation of designated sources of chlorinated solvents that contribute contamination to the Southwest (SW) Groundwater Plume at the Paducah Gaseous Diffusion Plant (PGDP), in Paducah, KY. The principal contaminants in the SW Plume are trichloroethene (TCE) and other volatile organic compounds (VOCs); these industrial solvents were used and disposed in various facilities and locations at PGDP. In the SW plume area, residual TCE sources are primarily in the fine-grained sediments of the Upper Continental Recharge System (UCRS), a partially saturated zone that delivers contaminants downwardmore » into the coarse-grained Regional Gravel Aquifer (RGA). The RGA serves as the significant lateral groundwater transport pathway for the plume. In the SW Plume area, the four main contributing TCE source units are: (1) Solid Waste Management Unit (SWMU) 1 / Oil Landfarm; (2) C-720 Building TCE Northeast Spill Site (SWMU 211A); (3) C-720 Building TCE Southeast Spill Site (SWMU 211B); and (4) C-747 Contaminated Burial Yard (SWMU 4). The PP presents the Preferred Alternatives for remediation of VOCs in the UCRS at the Oil Landfarm and the C-720 Building spill sites. The basis for the PP is documented in a Focused Feasibility Study (FFS) (DOE, 2011) and a Site Investigation Report (SI) (DOE, 2007). The SW plume is currently within the boundaries of PGDP (i.e., does not extend off-site). Nonetheless, reasonable mitigation of the multiple contaminant sources contributing to the SW plume is one of the necessary components identified in the PGDP End State Vision (DOE, 2005). Because of the importance of the proposed actions DOE assembled an Independent Technical Review (ITR) team to provide input and assistance in finalizing the PP.« less

13 CFR 119.1 - What is the Program for Investment in Microentrepreneurs (“PRIME” or “the Act”)?

Code of Federal Regulations, 2010 CFR

2010-01-01

... SBA to make grants to “qualified organizations” to fund training and technical assistance for disadvantaged entrepreneurs, build these organizations' own capacity to give training and technical assistance, fund research and development of “best practices” in microenterprise development and technical...

77 FR 1666 - Information Systems, Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-11

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems, Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC) will meet on January 25 and 26, 2012, 9 a.m., at Qualcomm Incorporated, 5775 Morehouse Drive, Building...

Technical Support Document: Development of the Advanced Energy Design Guide for K-12 Schools--30% Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pless, S.; Torcellini, P.; Long, N.

2007-09-01

This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for K-12 School Buildings (K-12 AEDG), a design guidance document intended to provide recommendations for achieving 30% energy savings in K-12 Schools over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The 30% energy savings target is the first step toward achieving net-zero energy schools; schools that, on an annual basis, draw from outside sources less or equal energy than they generate on site from renewable energy sources.

Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Heating, Ventilation, and Air Conditioning Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2011-09-01

This report covers an assessment of 182 different heating, ventilation, and air-conditioning (HVAC) technologies for U.S. commercial buildings to identify and provide analysis on 17 priority technology options in various stages of development. The analyses include an estimation of technical energy-savings potential, description of technical maturity, description of non-energy benefits, description of current barriers for market adoption, and description of the technology’s applicability to different building or HVAC equipment types. From these technology descriptions, are suggestions for potential research, development and demonstration (RD&D) initiatives that would support further development of the priority technology options.

Whole-building Design Increases Energy Efficiency in a Mixed-Humid Climate: Ideal Homes - Norman, Oklahoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

New houses designed by Ideal Homes, with technical support from the U.S. Department of Energy's Building America Program, save their homeowners money by applying the principles of "whole-building" design. The homes are in Norman, Oklahoma.

Whole-Building Design Increases Energy Efficiency in a Mixed-Humid Climate: Ideal Homes, Norman, Oklahoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poole, L.; Anderson, R.

New houses designed by Ideal Homes, with technical support from the U.S. Department of Energy's Building America Program, save their homeowners money by applying the principles of ''whole-building'' design. The homes are in Norman, Oklahoma.

42. CAPE COD AIR STATION PAVE PAWS FACILITY SHOWING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

42. CAPE COD AIR STATION PAVE PAWS FACILITY - SHOWING BUILDING "RED IRON" STEEL STRUCTURE AT 46T DAY OF STEEL CONSTRUCTION. "BUILDING TOPPED OFF, 7 JULY, 1974. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Two innovative solutions based on fibre concrete blocks designed for building substructure

NASA Astrophysics Data System (ADS)

Pazderka, J.; Hájek, P.

2017-09-01

Using of fibers in a high-strength concrete allows reduction of the dimensions of small precast concrete elements, which opens up new ways of solution for traditional construction details in buildings. The paper presents two innovative technical solutions for building substructure: The special shaped plinth block from fibre concrete and the fibre concrete elements for new technical solution of ventilated floor. The main advantages of plinth block from fibre concrete blocks (compared with standard plinth solutions) is: easier and faster assembly, higher durability and thanks to the air cavity between the vertical part of the block, the building substructure reduced moisture level of structures under the waterproofing layer and a comprehensive solution to the final surface of building plinth as well as the surface of adjacent terrain. The ventilated floor based on fibre concrete precast blocks is an attractive structural alternative for tackling the problem of increased moisture in masonry in older buildings, lacking a functional waterproof layer in the substructure.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hurlbut, David; Zhou, Ella; Bird, Lori

A strategically planned transmission network is an important source of flexibility for the integration of large-scale renewable energy (RE). Such a network can offer access to a broad geographic diversity of resources, which can reduce flexibility needs and facilitate sharing between neighboring balancing areas. This report builds on two previous NREL technical reports - Advancing System Flexibility for High Penetration Renewable Integration (Milligan et al. 2015) and 'Renewables-Friendly' Grid Development Strategies (Hurlbut et al. 2015) - which discuss various flexibility options and provide an overview of U.S. market models and grid planning. This report focuses on addressing issues with cross-regional/provincialmore » transmission in China with the aim of integrating renewable resources that are concentrated in remote areas and require inter-regional/provincial power exchange.« less

Social Consequences of Nomadic Working: A Case Study in an Organization

NASA Astrophysics Data System (ADS)

Singh, Ramanjit; Wood-Harper, Trevor

This research study identified social challenges that knowledge workers in the Swedish organization TeliaSonera (Telia) face when utilizing wireless technologies to conduct work on the move. Upon collecting the relevant research data, five problem areas were identified: work and life balance, addiction, organizational involvement, nomadic work and control, and individual productivity. Each problem area was examined with the philosophical underpinning of socio-technical design principles. The results confirm that better role boundary management, self-discipline, work negotiation, and e-mail communication skills may be required for the knowledge workers to manage the demands of nomadic working. Similarly, rewarding nomadic work performance, building employee supervisor trust relations, and designing jobs that enhance work and life balance can be imperative.

Motivating College Students' Learning English for Specific Purposes Courses through Corpus Building

ERIC Educational Resources Information Center

Wu, Lin-Fang

2014-01-01

This study was conducted to determine how to motivate technical college students to learn English for specific purposes (ESP) courses through corpus building and enhance their language proficiency during the coursework for their majors. This study explores corpus building skills, how to simplify ESP courses by corpus building for English as second…

Use of the method of biosphere compatibility for the assessment of environmental protection methods

NASA Astrophysics Data System (ADS)

Vorobyov, Sergey

2018-01-01

The article is devoted to the question of using the indicator of biosphere compatibility for assessing the effectiveness of environmental protection methods. The indicator of biosphere compatibility was proposed by the vice-president of RAASN (Russian Academy of Architecture and Building Sciences), Doctor of Technical Sciences, Professor V.I. Ilyichev. This indicator is allows not only qualitatively but also quantitatively to assess the degree of development of urban urban areas, from the standpoint of preserving the biosphere in urban ecosystems while realizing the city’s main functions. The integral indicator of biosphere compatibility is allows us to assess not only the current ecological situation in the territory under consideration, but also to plan the forecast of its changes for building the new construction projects, or for reconstructing existing ones. The indicator of biosphere compatibility, which is a mathematical expression of the tripartite balance (technosphere, biosphere and population of this area), is allows us to quantify the degree of effectiveness of different method of protecting the environment for choose the most effective for these conditions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sara Farrar, Stacey Rothgeb, Ben Polly, Lieko Earle, Tim Merrigan

This document is a set of appendices presenting technical discussion and references as a companion to the 'Building America FY 2016 Annual Report: Building America Is Driving Real Solutions in the Race to Zero Energy Homes' publication.

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2013 CFR

2013-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2014 CFR

2014-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal Evaluation...? Normally, technical and price proposals are reviewed independently by separate evaluation teams. However...

Correlations between Climate Change and the Modern European Construction

NASA Astrophysics Data System (ADS)

Gumińska, Anna

2017-10-01

The aim of the study was to analyze the links between climate change and the way modern cities are structured and responded to climate change. How do these changes affect building materials and technologies, or does climate change affect the type of technology and materials used? The most important results are the effects of analysing selected examples of a modern European building, the use of materials and technology, the adaptation of buildings to the changing climate. Selected examples of contemporary architecture from Germany, Italy and Denmark, Norway and Sweden. There are also examples in photographic documentation. The most important criteria affecting the objects are elements that shape the changing climate, as well as existing legal and technical requirements. The main conclusion was that modern urban space is adapted to the changing climate. Unprecedented climatic phenomena in this area: intense and sudden rain, snow, floods, strong winds, abundant sunshine, high temperature changes, greenhouse effect of the city - “island heat”, atmospheric pollution. Building materials and technologies contribute to the optimal conservation of natural resources, buildings are shaped in such a way as to ensure safety, resilience and environmental protection. However, there is still a need for continuous monitoring of climate change, criteria affecting the design and construction of urban and central facilities. Key words: energy efficiency, renewable energy, climate change, contemporary architecture.

Evolution of Spaces between Buildings in Polish Mass Housing Estates in the Eyes of the Inhabitants

NASA Astrophysics Data System (ADS)

Ostanska, Anna

2017-10-01

The author investigates into the state of public and semi-public spaces in the Polish housing estates erected in the times of mass housing projects (1960 - 1980). The character of these estates is special. On the one hand, the buildings were accompanied by lavishly designed open spaces with elaborate material infrastructure: urban design followed the ideas that time - and strict regulations - that, in theory, prevented creation of substandard spaces. Provision of affordable housing was given a priority in the centrally controlled economy, so vast greenfield areas were devoted to housing. Moreover, the estates often stay under one management of housing cooperatives for years. The assets are relatively modern and usually conveniently located within the city/town infrastructure. This gives the areas advantage over contemporary housing schemes affected by constraints imposed by prior development and commercial approach to the provision of housing. On the other hand, technical wear and tear, functional obsolescence, years of underinvestment, natural demographic changes in local communities, changing ownership structure, and weakening social bonds make the large housing estates with their too lavishly designed public areas an ungrateful object of management. Recent availability of the European Union funds for modernization of public spaces increases the numbers of municipal projects and individual initiatives to activate communities by improving public and semi-public spaces. A question arises whether the money and effort is spent reasonably. Do people actually use the new facilities? Are they encouraged to affect the form and function of their surrounding? Does the public space change according to some passing fancies, or according to the changing needs? To juxtapose the development of technical condition of infrastructure and functions offered by the space between buildings with the expectations of users, the author repeatedly views the scene and conducts structured interviews with the inhabitants of the estates. The paper presents the results of two interdisciplinary surveys, held five years apart in the same estate, and based on the same questionnaire. Its results confirm that user expectations evolve. The interest in the development of green areas, and availability of recreational facilities in the proximity of home is growing as people observe that changes are possible. Some people declare some form of active participation in improvements. Preferences towards functions and accessibility of the areas reflect changes in the demographic structure. Surveys of this kind may be regularly used in defining guidelines for further improvement measures, and raising user awareness of the personal responsibility for the condition of the neighbourhood.

Modeling of technical soil-erosion control measures and its impact on soil erosion off-site effects within urban areas

NASA Astrophysics Data System (ADS)

Dostal, Tomas; Devaty, Jan

2013-04-01

The paper presents results of surface runoff, soil erosion and sediment transport modeling using Erosion 3D software - physically based mathematical simulation model, event oriented, fully distributed. Various methods to simulate technical soil-erosion conservation measures were tested, using alternative digital elevation models of different precision and resolution. Ditches and baulks were simulated by three different approaches, (i) by change of the land-cover parameters to increase infiltration and decrease flow velocity, (ii) by change of the land-cover parameters to completely infiltrate the surface runoff and (iii) by adjusting the height of the digital elevation model by "burning in" the channels of the ditches. Results show advantages and disadvantages of each approach and conclude suitable methods for combinations of particular digital elevation model and purpose of the simulations. Further on a set of simulations was carried out to model situations before and after technical soil-erosion conservation measures application within a small catchment of 4 km2. These simulations were focused on quantitative and qualitative assessment of technical soil-erosion control measures impact on soil erosion off-site effects within urban areas located downstream of intensively used agricultural fields. The scenarios were built upon a raster digital elevation model with spatial resolution of 3 meters derived from LiDAR 5G vector point elevation data. Use of this high-resolution elevation model allowed simulating the technical soil-erosion control measures by direct terrain elevation adjustment. Also the structures within the settlements were emulated by direct change in the elevation of the terrain model. The buildings were lifted up to simulate complicated flow behavior of the surface runoff within urban areas, using approach of Arévalo (Arévalo, 2011) but focusing on the use of commonly available data without extensive detailed editing. Application of the technical soil-erosion control measures induced strong change in overall amount of eroded/deposited material as well as spatial erosion/deposition patterns within the settlement areas. Validation of modeled scenarios and effects on measured data was not possible as no real runoff event was recorded in the target area so the conclusions were made by comparing the different modeled scenarios. Advantages and disadvantages of used approach to simulate technical soil-erosion conservation measures are evaluated and discussed as well as the impact of use of high-resolution elevation data on the intensity and spatial distribution of soil erosion and deposition. Model approved ability to show detailed distribution of damages over target urban area, which is very sensitive for off-site effects of surface runoff, soil erosion and sediment transport and also high sensitivity to input data, especially to DEM, which affects surface runoff pattern and therefore intensity of harmful effects. Acknowledgement: This paper has been supported by projects: Ministry of the interior of the CR VG 20122015092, and project NAZV QI91C008 TPEO.

An electronic consumer health library: NetWellness.

PubMed Central

Guard, R; Haag, D; Kaya, B; Marine, S; Morris, T; Schick, L; Shoemaker, S

1996-01-01

NetWellness is a community-based, consumer-defined grant program supporting the delivery of electronic health information to rural residents of southern Ohio and urban and suburban communities in the Greater Cincinnati tri-state region. NetWellness is a collaboratively developed and publicly and privately funded demonstration project. Information is delivered via ISDN, standard dial, dedicated network connections, and the Internet. TriState Online (Greater Cincinnati's Free-Net) and other southern Ohio Free-Nets are key access points in the larger project communities. The other access points are more than forty workstations distributed at public sites throughout the project's primary geographical area. Design strengths and limitations, training initiatives, technical issues, and the project's impact on medical librarianship are examined in this paper. Also discussed are ways of determining community needs and interest, building political alliances, finding and developing funding sources, and overcoming technical obstacles. NetWellness's Internet address is: http:@www.netwellness.org. PMID:8913548

Training in reproductive health and sexuality: the case of a regional program in Latin America.

PubMed

Ramos, S; Gogna, M

1997-01-01

Beginning in July 1993, a 5-year program has sought to provide social research, training, and technical assistance in reproductive health and sexuality in Argentina, Chile, Peru, and Colombia by 1) building research capacity and promoting an interdisciplinary approach to reproductive health and sexuality and 2) promoting a gender perspective to these issues. The target groups are women's nongovernmental organizations (NGOs); family planning, reproductive health, and women's health providers; and social scientists conducting health-related research. Training activities include regional workshops, a Regional Resident Fellowship Program to support graduate-level education, and provision of technical assistance. The first 3 years of the program have revealed that the basic training needs in these areas include 1) helping women's NGOs improve their record-keeping capacity, evaluation processes, theoretical and methodological background, and institutional-building ability; 2) sensitizing women's health providers to sociocultural dimension of health-illness issues and to a gender and human rights perspective; and 3) training social scientist researchers to apply their skills in applied research, develop their theoretical background, and improve research quality control procedures. The main challenges for training activities in the field of reproductive health and sexuality are posed by the complexity of the issues and their interdisciplinary nature.

Expected benefits of federally-funded thermal energy storage research

NASA Astrophysics Data System (ADS)

Spanner, G. E.; Daellenbach, K. K.; Hughes, K. R.; Brown, D. R.; Drost, M. K.

1992-09-01

Pacific Northwest Laboratory (PNL) conducted this study for the Office of Advanced Utility Concepts of the US Department of Energy (DOE). The objective of this study was to develop a series of graphs that depict the long-term benefits of continuing DOE's thermal energy storage (TES) research program in four sectors: building heating, building cooling, utility power production, and transportation. The study was conducted in three steps. The first step was to assess the maximum possible benefits technically achievable in each sector. In some sectors, the maximum benefit was determined by a 'supply side' limitation, and in other sectors, the maximum benefit is determined by a 'demand side' limitation. The second step was to apply economic cost and diffusion models to estimate the benefits that are likely to be achieved by TES under two scenarios: (1) with continuing DOE funding of TES research; and (2) without continued funding. The models all cover the 20-year period from 1990 to 2010. The third step was to prepare graphs that show the maximum technical benefits achievable, the estimated benefits with TES research funding, and the estimated benefits in the absence of TES research funding. The benefits of federally-funded TES research are largely in four areas: displacement of primary energy, displacement of oil and natural gas, reduction in peak electric loads, and emissions reductions.

Energy Efficiency Program Administrators and Building Energy Codes

EPA Pesticide Factsheets

Explore how energy efficiency program administrators have helped advance building energy codes at federal, state, and local levels—using technical, institutional, financial, and other resources—and discusses potential next steps.

Building a new predictor for multiple linear regression technique-based corrective maintenance turnaround time.

PubMed

Cruz, Antonio M; Barr, Cameron; Puñales-Pozo, Elsa

2008-01-01

This research's main goals were to build a predictor for a turnaround time (TAT) indicator for estimating its values and use a numerical clustering technique for finding possible causes of undesirable TAT values. The following stages were used: domain understanding, data characterisation and sample reduction and insight characterisation. Building the TAT indicator multiple linear regression predictor and clustering techniques were used for improving corrective maintenance task efficiency in a clinical engineering department (CED). The indicator being studied was turnaround time (TAT). Multiple linear regression was used for building a predictive TAT value model. The variables contributing to such model were clinical engineering department response time (CE(rt), 0.415 positive coefficient), stock service response time (Stock(rt), 0.734 positive coefficient), priority level (0.21 positive coefficient) and service time (0.06 positive coefficient). The regression process showed heavy reliance on Stock(rt), CE(rt) and priority, in that order. Clustering techniques revealed the main causes of high TAT values. This examination has provided a means for analysing current technical service quality and effectiveness. In doing so, it has demonstrated a process for identifying areas and methods of improvement and a model against which to analyse these methods' effectiveness.

Usability requirements for buildings: a case study on primary schools.

PubMed

Duca, Gabriella

2012-01-01

This paper concerns an applied research aimed at applying the concept of usability, as derived form the standard ISO 9241/11, in the filed of building design, namely primary schools. Starting from the concept that space characteristics play a very relevant role in learning performances, the study presented here developed an original methodology for the assessment of effectiveness, efficiency and satisfaction of buildings hosting primary schools, in order to create a school environment better supporting users in their tasks. Research core is the framework of usability requirements and their related markers, indicators and technical specification that has been formulated in order to check compliance of urban area, building, rooms and architectural details with users needs. Therefore, a detailed task analysis of pupils and teacher tasks has been carried out and two questionnaires addressed to a significant users panel have been formulated for satisfaction survey. Lastly, a matrix for an overall reading of gathered data has been set-up and criteria for usability assessment based on that data has been defined. The whole study has been developed within the case study of a primary school in the Naples city centre, whose contents and results are discussed.

Strategies to Save 50% Site Energy in Grocery and General Merchandise Stores

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hirsch, A.; Hale, E.; Leach, M.

2011-03-01

This paper summarizes the methodology and main results of two recently published Technical Support Documents. These reports explore the feasibility of designing general merchandise and grocery stores that use half the energy of a minimally code-compliant building, as measured on a whole-building basis. We used an optimization algorithm to trace out a minimum cost curve and identify designs that satisfy the 50% energy savings goal. We started from baseline building energy use and progressed to more energy-efficient designs by sequentially adding energy design measures (EDMs). Certain EDMs figured prominently in reaching the 50% energy savings goal for both building types:more » (1) reduced lighting power density; (2) optimized area fraction and construction of view glass or skylights, or both, as part of a daylighting system tuned to 46.5 fc (500 lux); (3) reduced infiltration with a main entrance vestibule or an envelope air barrier, or both; and (4) energy recovery ventilators, especially in humid and cold climates. In grocery stores, the most effective EDM, which was chosen for all climates, was replacing baseline medium-temperature refrigerated cases with high-efficiency models that have doors.« less

Solar Energy - It's Growth, Development, and Use

Science.gov Websites

Report, June 1978 Solar Energy and Your Home: Questions and Answers, DOE Technical Report, January 1984 Solar Air Collectors: How Much Can You Save?, DOE Technical Report, April 1985 Building Design Guidelines for Solar Energy Technologies, DOE Technical Report, January 1989 OUT Success Stories: Solar

Advanced Energy Retrofit Guide: Practical Ways to Improve Energy Performance, K-12 Schools (Book)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The U.S. Department of Energy developed the Advanced Energy Retrofit Guides (AERGs) to provide specific methodologies, information, and guidance to help energy managers and other stakeholders plan and execute energy efficiency improvements. Detailed technical discussion is fairly limited. Instead, we emphasize actionable information, practical methodologies, diverse case studies, and unbiased evaluations of the most promising retrofit energy efficiency measures for each building type. A series of AERGs is under development, addressing key segments of the commercial building stock. K-12 schools were selected as one of the highest priority building sectors, because schools affect the lives of most Americans. They alsomore » represent approximately 8% of the energy use and 10% of the floor area in commercial buildings nationwide. U.S. K-12 school districts spend more than $8 billion each year on energy - more than they spend on computers and textbooks combined. Most occupy older buildings that often have poor operational performance - more than 30% of schools were built before 1960. The average age of a school is about 42 years - which is nearly the expected serviceable lifespan of the building. K-12 schools offer unique opportunities for deep, cost-effective energy efficiency improvements, and this guide provides convenient and practical guidance for exploiting these opportunities in the context of public, private, and parochial schools.« less

Exploring accessibility issues of a public building for the mobility impaired. Case study: interstate bus terminal (ISBT), Vijayawada, India.

PubMed

Alagappan, Valliappan; Hefferan, Albert; Parivallal, Aarthi

2018-04-01

Right to access in the built environment creates equal and nondiscriminatory opportunities to a person with disabilities in order to move freely around and interact positively without hindrance and barriers. The objective of the study is to understand the existing accessibility related issues and implementation of guidelines and standards for public buildings. The technical verification using onsite and offsite access audit format for current provision of facilities in the internal and external environment has been carried out with the format prepared in reference to Central Public Works Department (CPWD) accessibility guidelines for mobility impaired and elderly and American Disability Act (ADA) guidelines. The access audit format included parameters like accessibility, safety, security, comfort and convenience and it addresses the barriers faced by wheel chair users, people with crutches, prosthetics and with non-assistive devices. The study addressed accessibility compliance in three zones of the building with initiation from parking area zone, inside the building, and area outside the building premises. The findings highlight the environmental barriers encountered by mobility impaired people and represented graphically in the layout plan and physical effort required to overcome the challenges in the built environment. The overall accessibility compliance is 42% in the interstate bus terminal. Implications for rehabilitation The study identifies the environmental limitations, human and technologically facilitators with the help of Central Public Works Department (CPWD) and American Disability Act (ADA) guidelines (1990). It highlights barriers for mobility-impaired users, by demonstrating in a spatial layout and the means to facilitate easy access with minimal frustration, stress and with less physical effort. It demonstrates the need for preparation of separate guidelines for making the existing types of buildings to be access and disabled-friendly. New accessibility guidelines shall be prepared by incorporating concepts like such as relative accessibility into new bus terminal buildings. Guidelines help the disabled in the process of rehabilitation and develop inclusiveness not rather than alienation.

Savannah Capacity Building Pilot Project

EPA Pesticide Factsheets

A series of meetings involving the Georgia Ports Authority and near-port community organizations were convened for a community capacity building pilot project. Technical assistance is being provided by EPA to support effective engagement.

Building code compliance and enforcement: The experience of San Francisco's residential energy conservation ordinance and California's building standards for new construction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vine, E.

1990-11-01

As part of Lawrence Berkeley Laboratory's (LBL) technical assistance to the Sustainable City Project, compliance and enforcement activities related to local and state building codes for existing and new construction were evaluated in two case studies. The analysis of the City of San Francisco's Residential Energy Conservation Ordinance (RECO) showed that a limited, prescriptive energy conservation ordinance for existing residential construction can be enforced relatively easily with little administrative costs, and that compliance with such ordinances can be quite high. Compliance with the code was facilitated by extensive publicity, an informed public concerned with the cost of energy and knowledgeablemore » about energy efficiency, the threat of punishment (Order of Abatement), the use of private inspectors, and training workshops for City and private inspectors. The analysis of California's Title 24 Standards for new residential and commercial construction showed that enforcement of this type of code for many climate zones is more complex and requires extensive administrative support for education and training of inspectors, architects, engineers, and builders. Under this code, prescriptive and performance approaches for compliance are permitted, resulting in the demand for alternative methods of enforcement: technical assistance, plan review, field inspection, and computer analysis. In contrast to existing to construction, building design and new materials and construction practices are of critical importance in new construction, creating a need for extensive technical assistance and extensive interaction between enforcement personnel and the building community. Compliance problems associated with building design and installation did occur in both residential and nonresidential buildings. 12 refs., 5 tabs.« less

Director's Discretionary Research and Development Program: Annual Report, Fiscal Year 2005

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2005-12-01

The Director's Discretionary Research and Development (DDRD) program is designed to encourage technical innovation and build new research and development capabilities at the National Renewable Energy Laboratory (NREL). Technical innovation is critical to the long-term viability of NREL (also referred to as the Laboratory) and to the success of the U.S. Department of Energy (DOE). The strategic value of DDRD is being continuously enhanced by expanding the opportunities to propose and pursue innovative ideas for building new and enhanced capabilities.

Guidance Manual: Asbestos Operations & Maintenance Work Practices. Second Edition.

ERIC Educational Resources Information Center

National Inst. of Building Sciences, Washington, DC.

This technical manual provides detailed guidance to building owners, asbestos program managers, and operations and maintenance (O&M) workers for managing asbestos-containing materials (ACM) in buildings. The manual addresses four different types of ACM found in buildings and three different levels of precaution which may be warranted by…

Building Ecology & School Design. Technical Bulletin.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, Baltimore.

To better understand construction's impact, an overview of building ecology as a concept and as a decision-making model for school systems is provided. "Building ecology" is defined as the interrelationships among people, the built environment, and the natural environment. It has special relevance for school design because most of the…

Establishment of a building audit procedure and analysis for the Kansas Department of Transportation phase 2A : buildings, [technical summary].

DOT National Transportation Integrated Search

2013-11-01

Over the past few years, state governments and entities have become concerned with the energy consumption : and efficiency of their facilities. An effective manner to identify potential to reduce energy and water : consumption and increase building e...

Energy Efficiency of Higher Education Buildings: A Case Study

ERIC Educational Resources Information Center

Soares, Nelson; Pereira, Luísa Dias; Ferreira, João; Conceição, Pedro; da Silva, Patrícia Pereira

2015-01-01

Purpose: This paper aims to propose an energy efficiency plan (with technical and behavioural improvement measures) for a Portuguese higher education building--the Teaching Building of the Faculty of Economics of the University of Coimbra (FEUC). Design/methodology/approach: The study was developed in the context of both the "Green…

BUILD: A community development simulation game, appendix A

NASA Technical Reports Server (NTRS)

Orlando, J. A.; Pennington, A. J.

1973-01-01

The computer based urban decision-making game BUILD is described. BUILD is aimed at: (1) allowing maximum expression of value positions by participants through resolution of intense, task-oriented conflicts: (2) heuristically gathering information on both the technical and social functioning of the city through feedback from participants: (3) providing community participants with access to technical expertise in urban decision making, and to expose professionals to the value positions of the community: and (4) laying the groundwork for eventual development of an actual policy making tool. A brief description of the roles, sample input/output formats, an initial scenario, and information on accessing the game through a time-sharing system are included.

Roof top extensions for multifamily houses in Slovakia

NASA Astrophysics Data System (ADS)

Szekeres, K.

2010-12-01

In the countries of the European Union with the exception of Malta, approximately 100.1 million multifamily dwelling units are situated. These dwellings count for an average of 47.5% of the total housing stock in European Union countries. At present in Slovakia and also other countries of Central and Eastern Europe, there are vast housing areas which were built after World War II. Slovakia's multifamily housing stock was privatized during the 1990s. Considering that the economy of Slovakia is not capable of replacing the existing housing fund, which is located in the multifamily houses that were built after World War II, it is necessary to place an increased emphasis on the renovation of this housing fund. The expenditures for the refurbishment of multifamily housing stock in recent decades, when compared with the demand, have been at a very low level. The main problems involving the current multifamily housing stock in Slovakia are: the need for modernization, the low level of energy efficiency, and the insufficient level of building maintenance. One of the options for creating sufficient sources for the renovation of apartment buildings is to utilize the roofs of apartment buildings as construction areas for building additional floors (over - roofing). The means acquired from the sale of the new floors after deducting the costs can be used for renovation. It is a matter of a one-time possibility, which is limited by many factors that depend on the localization and constructive technical solutions for apartment buildings. This article is an outcome of the SuReFit "Sustainable Roof Extension Retrofit for High-Rise Social Housing in Europe" international research project.

New Orleans Capacity Building Pilot Project

EPA Pesticide Factsheets

A series of meetings involving the Port of New Orleans and near-port community organizations were convened for a community capacity building pilot project. Technical assistance is being provided by EPA to support effective engagement.

Technical Support Document: The Development of the Advanced Energy Design Guide for Highway Lodging Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Wei; Jarnagin, Ronald E.; Gowri, Krishnan

2008-09-30

This Technical Support Document (TSD) describes the process and methodology for development of the Advanced Energy Design Guide for Highway Lodgings (AEDG-HL or the Guide), a design guidance document intended to provide recommendations for achieving 30% energy savings in highway lodging properties over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-HL is the fifth in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA),more » the United States Green Buildings Council (USGBC), and the U.S. Department of Energy (DOE).« less

Marketability requirements for fault detection and diagnostics in commercial buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heinemeier, K.H.

Fault Detection and Diagnostics (FDD) is a technology that has a great potential for improving performance and reducing energy consumed in commercial buildings, and is rapidly becoming feasible for the buildings sector. Scientists have developed algorithms for FDD, and are making plans for field-testing and demonstration of these methods in real buildings. These efforts will provide a sound technical basis for FDD product offerings. FDD has the potential to dramatically improve the quality of operation of buildings. However, progress on technical issues is only one step towards implementing FDD in the market. FDD cannot be expected to have a majormore » impact on buildings unless market issues are addressed. Many questions will have to be answered regarding the users of FDD systems, the usability of the product, the market for FDD, and the nature of possible FDD offerings. It is crucial to consider marketing issues in parallel with the more technical issues. Constraints and opportunities that will be faced in marketing the products must be recognized early in technology development, and addressed and integrated into designs to ensure an appropriate system design. This paper identified a number of key questions that will arise in addressing marketability issues. These questions will have to be answered individually by technology developers and entities intending to market FDD. This paper presents some of the considerations that must go into the answering the questions, and provides a framework for analyzing the market requirements.« less

Advancing migratory bird conservation and management by using radar: An interagency collaboration

USGS Publications Warehouse

Ruth, Janet M.; Barrow, Wylie C.; Sojda, Richard S.; Dawson, Deanna K.; Diehl, Robert H.; Manville, Albert; Green, Michael T.; Krueper, David J.; Johnston, Scott

2005-01-01

Many technical issues make this work difficult, including complex data structures, massive data sets, digital recognition of birds, large areas not covered by weather radar, and model validation; however, progress will only be furthered by tackling the challenge. The new coalition will meets its goals by: (1) facilitating a productive collaboration with NOAA, Department of the Interior bureaus, state wildlife agencies, universities, power companies, and other potential partners; (2) building and strengthening scientific capabilities within USGS; (3) addressing key migratory bird management issues; and (4) ensuring full funding for the collaborative effort.

Report on the activities of the Danish Atomic Energy Commission up to 31 March 1957

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1958-01-15

Activities of the Danish Atomic Energy Commission from its establishment in 1955 through March, 1957, are reported. The technical and administrative organization of the Commission are outlined. Contracts were signed for the purchase of two reactors. The site for a reactor research establishment was acquired on the Risoe Peninsula near Roskilde. Land for agricultural experiments was acquired nearby. Buildings and facilities were nearing completion by 1957. Training programs for personnel were held. Areas of international cooperation in the peaceful use of atomic energy are outlined. A statement of expenditures is included. (C.H.)

Some observations on Chinese education

NASA Technical Reports Server (NTRS)

Spearman, M. L.

1986-01-01

China has encountered many ups and downs in the field of education over the years. Although hampered by financial and personnel problems, impressive progress has been made in primary education since 1949, particularly in urban areas. The total education system is still weak, however, with a serious shortage of qualified teachers, school buildings, and other necessary facilities. Some of the problems involved are discussed. Current efforts aimed at increasing the level of compulsory education are outlined and observations are made on the status and plans relative to basic education, technical and vocational education, teacher training, resource requirements, enrollment trends, and so on.

75 FR 20816 - Transportation and Related Equipment Technical Advisory Committee; Notice of Partially Closed...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-21

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Transportation and Related Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Transportation and Related Equipment Technical Advisory Committee will meet on May 5, 2010, 9:30 a.m., in the Herbert C. Hoover Building, Room 6087B, 14th Street between Constitution &...

Community and Technical Colleges at a Glance. Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2015

2015-01-01

The vision of Washington State Board for Community and Technical Colleges is to build strong communities, individuals and families, and achieve a greater global competitiveness and prosperity for the state and its economy by raising the knowledge and skills of the state's residents. The most urgent mission of the Washington State Board for…

Fault-Slip Data Analysis and Cover Versus Basement Fracture Patterns - Implications for Subsurface Technical Processes in Thuringia, Germany

NASA Astrophysics Data System (ADS)

Kasch, N.; Kley, J.; Navabpour, P.; Siegburg, M.; Malz, A.

2014-12-01

Recent investigations in Thuringia, Central Germany, focus on the potential for carbon sequestration, groundwater supply and geothermal energy. We report on the results of an integrated fault-slip data analysis to characterize the geometries and kinematics of systematic fractures in contrasting basement and cover rock lithologies. The lithostratigraphy of the area comprises locally exposed crystalline rocks and intermittently overlying Permian volcanic and clastic sedimentary rocks, together referred to as basement. A Late Permian sequence of evaporites, carbonates and shale constitutes the transition to the continuous sedimentary cover of Triassic age. Major NW-SE-striking fault zones and minor NNE-SSW-striking faults affect this stratigraphic succession. These characteristic narrow deforming areas (< 3 km width) build a dense network of individual fault strands with a close juxtaposition to wider (> 15 km) non-deforming areas suggesting localized zones of mechanical weakness, which can be confirmed by the frequent reactivation of single fault strands. Along the major fault zones, the basement and cover contain dominant inclined to sub-vertical NW-SE-striking fractures. These fractures indicate successive normal, dextral strike-slip and reverse senses of slip, evidencing events of NNE-SSW extension and contraction. Another system of mostly sub-vertical NNW-SSE- and NE-SW-striking conjugate strike-slip faults mainly developed within the cover implies NNE-SSW contraction and WNW-ESE extension. Earthquake focal mechanisms and in-situ stress measurements reveal a NW-SE trend for the modern SHmax. Nevertheless, fractures and fault-slip indicators are rare in the non-deforming areas, which characterizes Thuringia as a dual domain of (1) large unfractured areas and (2) narrow zones of high potential for technical applications. Our data therefore provide a basis for estimation of slip and dilation tendency of the contrasting fractures in the basement and cover under the present-day stress field, which must be taken into account for different subsurface technical approaches.

Solar heating and cooling system for an office building at Reedy Creek Utilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-08-01

This final report describes in detail the solar energy system installed in a new two-story office building at the Reedy Creek Utilities Company, which provides utility service to Walt Disney World at Lake Buena Vista, Florida. The solar components were partly funded by the Department of Energy under Contract EX-76-C-01-2401, and the technical management was by NASA/George C. Marshall Space Flight Center. The solar energy system application is 100 percent heating, 80 percent cooling, and 100 percent hot water. The collector is a modular cylindrical concentrator type with an area of 3.840 square feet. The storage medium is water withmore » a capacity of 10,000 gallons hot and 10,000 gallons chilled. Design, construction, operation, cost, maintenance, and performance are described in depth. Detailed drawings are included.« less

Building America Systems Integration Research Annual Report. FY 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gestwick, Michael

2013-05-01

This Building America FY2012 Annual Report includes an overview of the Building America Program activities and the work completed by the National Renewable Energy Laboratory and the Building America industry consortia (the Building America teams). The annual report summarizes major technical accomplishments and progress towards U.S. Department of Energy Building Technologies Program's multi-year goal of developing the systems innovations that enable risk-free, cost effective, reliable and durable efficiency solutions that reduce energy use by 30%-50% in both new and existing homes.

Report: Results of Technical Network Vulnerability Assessment: EPA’s Erlanger Building

EPA Pesticide Factsheets

Report #10-P-0211, September 7, 2010. Vulnerability testing of EPA’s Erlanger Building network conducted in June 2010 identified Internet Protocol addresses with numerous high-risk and medium-risk vulnerabilities.

Denver airport pumping systems achieve optimal [Delta] T's

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mannion, G.F.; Krist, G.D.

1994-07-01

This article describes how the pumping and generating systems at the new Denver Airport operate efficiently with the user loops in the buildings producing design temperature rise at all load levels. Fifteen miles east of Denver's Stapleton International Airport lies the newly completed Denver International Airport (DIA)--the world's largest and most high-tech airport. Besides being one of the largest construction projects in the works, it has many of the latest technical innovations available. Of particular interest to the HVAC industry is the design of the heating and cooling water systems. These systems provide environmental cooling and heating water to themore » three concourses, the airport office building, and the main terminal. The mechanical engineers for the project were all from the Denver area. The central plant design was the work of Behrent Engineering Co.; the three concourses were designed by Swanson-Rink Associates; and the main terminal and administrative office building were designed by Abeyta Engineering Consultants. The overall system concept was developed during the initial design phase by engineers from these firms, members of the DIA staff, and application engineers from several manufacturers.« less

Strategic advantages of high-rise construction

NASA Astrophysics Data System (ADS)

Yaskova, Natalya

2018-03-01

Traditional methods to assess the competitiveness of different types of real estate in the context of huge changes of new technological way of life don't provide building solutions that would be correct from a strategic perspective. There are many challenges due to changes in the consumers' behavior in the housing area. A multiplicity of life models, a variety of opportunities and priorities, traditions and new trends in construction should be assessed in terms of prospective benefits in the environment of the emerging new world order. At the same time, the mane discourse of high-rise construction mainly relates to its design features, technical innovations, and architectural accents. We need to clarify the criteria for economic evaluation of high-rise construction in order to provide decisions with clear and quantifiable contexts. The suggested approach to assessing the strategic advantage of high-rise construction and the prospects for capitalization of high-rise buildings poses new challenges for the economy to identify adequate quantitative assessment methods of the high-rise buildings economic efficiency, taking into account all stages of their life cycle.

Modeling of information on the impact of mining exploitation on bridge objects in BIM

NASA Astrophysics Data System (ADS)

Bętkowski, Piotr

2018-04-01

The article discusses the advantages of BIM (Building Information Modeling) technology in the management of bridge infrastructure on mining areas. The article shows the problems with information flow in the case of bridge objects located on mining areas and the advantages of proper information management, e.g. the possibility of automatic monitoring of structures, improvement of safety, optimization of maintenance activities, cost reduction of damage removal and preventive actions, improvement of atmosphere for mining exploitation, improvement of the relationship between the manager of the bridge and the mine. Traditional model of managing bridge objects on mining areas has many disadvantages, which are discussed in this article. These disadvantages include among others: duplication of information about the object, lack of correlation in investments due to lack of information flow between bridge manager and mine, limited assessment possibilities of damage propagation on technical condition and construction resistance to mining influences.

A survey on draught animal technology (DAT) in EN-Nhoud area, North Kordofan State, Sudan.

PubMed

Makki, Elsamawal Khalil; Musa, Ezdehar Omer Mohammed

2011-06-01

Draught animal technology (DAT) can potentially play a central role in agriculture transformation for traditional farmers. This study surveyed the state of DAT in En-Nhoud area, North Kordofan State, Sudan in an attempt to have a clear view of the changes brought about by introducing the technology. The study followed the cross-sectional survey design. Farmers were selected from ten clusters (villages) and data were collected using questionnaires and face to face interviews with farmers in addition to group discussions with them and the different actors in the field. The results showed that farmers appreciate the role played by DAT, but they highlighted the need for further capacity building and technical backup. Harnessing issues are not well understood and applied by the farmers. The different actors involved in DAT in the area lack networking and coordination, and this reflected on the many problems and constraints faced by the farmers.

40. Photocopy of building model photograph, ca., 1974, photographer unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

40. Photocopy of building model photograph, ca., 1974, photographer unknown. Original photograph property of United States Air Force, 21" Space Command. CAPE COD AIR STATION PAVE PAWS FACILITY MODEL - ELEVATION SHOWING FLOOR AND EQUIPMENT LAYOUT. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

39. Photocopy of building model photograph, ca. 1974, photographer unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

39. Photocopy of building model photograph, ca. 1974, photographer unknown. Original photograph property of United States Air Force, 21" Space Command. CAPE COD AIR STATION PAVE PAWS FACILITY MODEL - SHOWING "A" AND "B" FACES. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Measure of School Capacity for Improvement (MSCI). User Manual and Technical Report

ERIC Educational Resources Information Center

Hughes, Georgia K.; Copley, Lisa D.; Howley, Caitlin W.; Meehan, Merrill L.

2005-01-01

Building capacity within schools and districts for continuous improvement is a goal of educators at all levels across the United States of America. An important first step in capacity building is identifying schools' current strengths and weaknesses. Schools can then begin building upon existing strengths to implement improvement initiatives.…

Balancing the Building Team: Gender Issues in the Building Professions. Report 284.

ERIC Educational Resources Information Center

Court, Gill; Moralee, Janet

The following activities were conducted to identify strategies for improving the representation of women in professional, managerial, and technical occupations in the United Kingdom's building industry: literature review; mail questionnaire to which 468 (63.8%) of the 733 women contacted responded; group discussions with 32 women employed in the…

75 FR 63404 - Fossil Fuel-Generated Energy Consumption Reduction for New Federal Buildings and Major...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

... [Docket No. EERE-2010-BT-STD-0031] RIN 1904-AB96 Fossil Fuel-Generated Energy Consumption Reduction for... of fossil fuel-generated energy consumption in new Federal buildings and Federal buildings undergoing... full fossil fuel-generated energy consumption reduction level is technically impracticable in light of...

Performance of Building Technology Graduates in the Construction Industry in Ghana

ERIC Educational Resources Information Center

Ayarkwa, J.; Dansoh, Ayirebi; Adinyira, E.; Amoah, P.

2011-01-01

Purpose: This paper aims to assess the perception of the Ghanaian construction industry of the performance of entry-level building technology graduates. Also, other non-technical skills or attributes expected from building technology graduates are to be compared with the actual proficiency of the graduates. Design/methodology/approach: The…

New Books for Industrial Educators

ERIC Educational Resources Information Center

School Shop, 1975

1975-01-01

The most recent book releases in the field of industrial-technical education are listed alphabetically under: automotive/power mechanics; building trades; drafting; electricity/electronics; graphic arts, industrial arts, vocational, technical and career education; industrial mathematics; machine shop/metalworking; metrics; radio/television;…

Technical, Managerial and Financial (TMF) Capacity Resources for Small Drinking Water Systems

EPA Pesticide Factsheets

Resources are available to help public water systems build the technical, managerial and financial (TMF) capacity. TMF capacity is necessary to achieve and maintain long-term sustainability and compliance with national safe drinking water regulations.

Building Technological Capability within Satellite Programs in Developing Countries

NASA Astrophysics Data System (ADS)

Wood, Danielle Renee

Global participation in space activity is growing as satellite technology matures and spreads. Countries in Africa, Asia and Latin America are creating or reinvigorating national satellite programs. These countries are building local capability in space through technological learning. They sometimes pursue this via collaborative satellite development projects with foreign firms that provide training. This phenomenon of collaborative satellite development projects is poorly understood by researchers of technological learning and technology transfer. The approach has potential to facilitate learning, but there are also challenges due to misaligned incentives and the tacit nature of the technology. Perspectives from literature on Technological Learning, Technology Transfer, Complex Product Systems and Product Delivery provide useful but incomplete insight for decision makers in such projects. This work seeks a deeper understanding of capability building through collaborative technology projects by conceiving of the projects as complex, socio-technical systems with architectures. The architecture of a system is the assignment of form to execute a function along a series of dimensions. The research questions explore the architecture of collaborative satellite projects, the nature of capability building during such projects, and the relationship between architecture and capability building. The research design uses inductive, exploratory case studies to investigate six collaborative satellite development projects. Data collection harnesses international field work driven by interviews, observation, and documents. The data analysis develops structured narratives, architectural comparison and capability building assessment. The architectural comparison reveals substantial variation in project implementation, especially in the areas of project initiation, technical specifications of the satellite, training approaches and the supplier selection process. The individual capability building assessment shows that most trainee engineers gradually progressed from no experience with satellites through theoretical training to supervised experience; a minority achieved independent experience. At the organizational level, the emerging space organizations achieved high levels of autonomy in project definition and satellite operation, but they were dependent on foreign firms for satellite design, manufacture, test and launch. The case studies can be summarized by three archetypal projects defined as "Politically Pushed," "Structured," and "Risk Taking." Countries in the case studies tended to start in a Politically Pushed mode, and then moved into either Structured or Risk Taking mode. Decision makers in emerging satellite programs can use the results of this dissertation to consider the broad set of architectural options for capability building. Future work will continue to probe how specific architectural decisions impact capability building outcomes in satellite projects and other technologies. (Copies available exclusively from MIT Libraries, libraries.mit.edu/docs - docs@mit.edu)

Revitalization of Energy Supply Systems in the Scale of a Town, a District and an Island

NASA Astrophysics Data System (ADS)

Juchimiuk, Justyna

2016-09-01

Model actions undertaken in HafenCity and Wilhelmsburg during IBA Hamburg 2006- 13 as well as energy transformation of Danish island of Samsø towards self-sufficiency are examples of the use of energy as one of the key factors in the design of revitalization process in various scales. An important issue is to determine the impact of renewable energy systems on design process, architecture and urbanism of revitalized structures. Article examines the programs and projects related to the processes: renewal of degraded inner-industrial areas (brownfields), ecological restoration of degraded land, the revitalization of port and underdeveloped areas in the aspects of climate protection, the use of energy from renewable sources and improvement of technical conditions of building substance while maintaining the principles of sustainable development.

NASA/Drexel program. [research effort in large-scale technical programs management for application to urban problems

NASA Technical Reports Server (NTRS)

1973-01-01

The results are reported of the NASA/Drexel research effort which was conducted in two separate phases. The initial phase stressed exploration of the problem from the point of view of three primary research areas and the building of a multidisciplinary team. The final phase consisted of a clinical demonstration program in which the research associates consulted with the County Executive of New Castle County, Delaware, to aid in solving actual problems confronting the County Government. The three primary research areas of the initial phase are identified as technology, management science, and behavioral science. Five specific projects which made up the research effort are treated separately. A final section contains the conclusions drawn from total research effort as well as from the specific projects.

Integrated and holistic suitability assessment of recycling options for masonry rubble

NASA Astrophysics Data System (ADS)

Herbst, T.; Rübner, K.; Meng, B.

2012-04-01

Our industrial society depends on continuous mining and consumption of raw materials and energy. Besides, the building sector causes one of the largest material streams in Germany. On the one hand, the building sector is connected with a high need in material and energetic resources as well as financial expenditures. On the other hand, nearly 50 % of the volume of waste arises from the building industry. During the last years, the limitation of natural resources, increasing negative environmental consequences as well as rising prices and shortages of dump space have led to a change in thinking in the building and waste industry to a closed substance cycle waste management. In consideration of the production figures of the main kinds of masonry units (clay bricks, sand-lime bricks, autoclaved aerated concrete brick, concrete blocks), a not unimportant quantity of masonry rubble (including gypsum plaster boards, renders, mortars and mineral insulating materials) of more than 20 million tons per year is generated in the medium term. With regard to a sustainable closed substance cycle waste management, these rest masses have to be recycled if possible. Processed aggregates made from masonry rubble can be recycled in the production of new masonry units under certain conditions. Even carefully deconstructed masonry units can once more re-used as masonry units, particularly in the area of the preservation of monuments and historical buildings. In addition, masonry rubble in different processing qualities is applied in earth and road construction, horticulture and scenery construction as well as concrete production. The choice of the most suitable recycling option causes technical, economical and ecological questions. At present, a methodology for a comprehensive suitability assessment with a passable scope of work does not exist. Basic structured and structuring information on the recycling of masonry rubble is absent up to now. This as well as the economic and technical constraints lead to a subordinated utilization on a rather low application level (downcycling). However, masonry rubble should also be recycled on a higher level (upcycling) in the future. For this purpose, an integrated and holistic but also practically oriented methodology for the suitability assessment of different recycling applications for masonry rubble is developed for a PhD currently. The suitability assessment includes the simultaneous evaluation of technical, economical and ecological aspects. Therefore, all recycling phases (demolition, processing, re-use) and the main kinds of masonry units (sorted or mixed) with their specific properties have to be considered.

Type A Accident Investigation Board report on the January 17, 1996, electrical accident with injury in Technical Area 21 Tritium Science and Fabrication Facility Los Alamos National Laboratory. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-04-01

An electrical accident was investigated in which a crafts person received serious injuries as a result of coming into contact with a 13.2 kilovolt (kV) electrical cable in the basement of Building 209 in Technical Area 21 (TA-21-209) in the Tritium Science and Fabrication Facility (TSFF) at Los Alamos National Laboratory (LANL). In conducting its investigation, the Accident Investigation Board used various analytical techniques, including events and causal factor analysis, barrier analysis, change analysis, fault tree analysis, materials analysis, and root cause analysis. The board inspected the accident site, reviewed events surrounding the accident, conducted extensive interviews and document reviews,more » and performed causation analyses to determine the factors that contributed to the accident, including any management system deficiencies. Relevant management systems and factors that could have contributed to the accident were evaluated in accordance with the guiding principles of safety management identified by the Secretary of Energy in an October 1994 letter to the Defense Nuclear Facilities Safety Board and subsequently to Congress.« less

The 2009 L'Aquila earthquake sequence: technical and scientific activities during the emergency and post-emergency phases

NASA Astrophysics Data System (ADS)

Cardinali, Mauro

2010-05-01

The Central Apennines of Italy is an area characterized by significant seismic activity. In this area, individual earthquakes and prolonged seismic sequences produce a variety of ground effects, including landslides. The L'Aquila area, in the Abruzzo Region, was affected by an earthquake sequence that started on December 2008, and continued for several months. The main shock occurred on April 6, 2009, with local magnitude m = 6.3, and was followed by two separate earthquakes on April 7 and April 9, each with a local magnitude m > 5.0. The main shocks caused 308 fatalities, injured more than 1500 people, and left in excess of 65,000 people homeless. Damage to the cultural heritage was also severe, with tens of churches and historical buildings severely damaged or destroyed. The main shocks and some of the most severe aftershocks triggered landslides, chiefly rock falls and minor rock slides that caused damage to towns, individual houses, and the transportation network. Beginning in the immediate aftermath of the event, and continuing during the emergency and post-emergency phases, we assisted the Italian national Department for Civil Protection in the evaluation of local landslide and hydrological risk conditions. Technical and scientific activities focused on: (i) mapping the location, type, and severity of the main ground effects produced by the earthquake shaking, (ii) evaluating and selecting sites for potential new settlements and individual buildings, including a preliminary assessment of the local geomorphological and hydrological conditions; (iii) evaluating rock fall hazard at individual sites, (iv) monitoring slope and ground deformations, and (v) designing and implementing a prototype system for the forecast of the possible occurrence of rainfall-induced landslides. To execute these activates, we exploited a wide range of methods, techniques, and technologies, and we performed repeated field surveys, the interpretation of ground and aerial photographs taken at different times, the analysis and processing of optical and SAR satellite images, and the statistical analysis of rainfall measurements and quantitative weather forecasts.

Precise photorealistic visualization for restoration of historic buildings based on tacheometry data

NASA Astrophysics Data System (ADS)

Ragia, Lemonia; Sarri, Froso; Mania, Katerina

2018-03-01

This paper puts forward a 3D reconstruction methodology applied to the restoration of historic buildings taking advantage of the speed, range and accuracy of a total geodetic station. The measurements representing geo-referenced points produced an interactive and photorealistic geometric mesh of a monument named `Neoria.' `Neoria' is a Venetian building located by the old harbor at Chania, Crete, Greece. The integration of tacheometry acquisition and computer graphics puts forward a novel integrated software framework for the accurate 3D reconstruction of a historical building. The main technical challenge of this work was the production of a precise 3D mesh based on a sufficient number of tacheometry measurements acquired fast and at low cost, employing a combination of surface reconstruction and processing methods. A fully interactive application based on game engine technologies was developed. The user can visualize and walk through the monument and the area around it as well as photorealistically view it at different times of day and night. Advanced interactive functionalities are offered to the user in relation to identifying restoration areas and visualizing the outcome of such works. The user could visualize the coordinates of the points measured, calculate distances and navigate through the complete 3D mesh of the monument. The geographical data are stored in a database connected with the application. Features referencing and associating the database with the monument are developed. The goal was to utilize a small number of acquired data points and present a fully interactive visualization of a geo-referenced 3D model.

Precise photorealistic visualization for restoration of historic buildings based on tacheometry data

NASA Astrophysics Data System (ADS)

Ragia, Lemonia; Sarri, Froso; Mania, Katerina

2018-04-01

This paper puts forward a 3D reconstruction methodology applied to the restoration of historic buildings taking advantage of the speed, range and accuracy of a total geodetic station. The measurements representing geo-referenced points produced an interactive and photorealistic geometric mesh of a monument named `Neoria.' `Neoria' is a Venetian building located by the old harbor at Chania, Crete, Greece. The integration of tacheometry acquisition and computer graphics puts forward a novel integrated software framework for the accurate 3D reconstruction of a historical building. The main technical challenge of this work was the production of a precise 3D mesh based on a sufficient number of tacheometry measurements acquired fast and at low cost, employing a combination of surface reconstruction and processing methods. A fully interactive application based on game engine technologies was developed. The user can visualize and walk through the monument and the area around it as well as photorealistically view it at different times of day and night. Advanced interactive functionalities are offered to the user in relation to identifying restoration areas and visualizing the outcome of such works. The user could visualize the coordinates of the points measured, calculate distances and navigate through the complete 3D mesh of the monument. The geographical data are stored in a database connected with the application. Features referencing and associating the database with the monument are developed. The goal was to utilize a small number of acquired data points and present a fully interactive visualization of a geo-referenced 3D model.

Lilliputian Suburbia Grows Like a Giant

ERIC Educational Resources Information Center

Open Door, 1969

1969-01-01

As part of the building trades drafting program at Robeson Technical Institute students build models of homes they have designed. Other aspects of the program including preparatory courses, field trips, and planned improvements in the curriculum are discussed. (HH)

NAS infrastructure management system build 1.5 computer-human interface

DOT National Transportation Integrated Search

2001-01-01

Human factors engineers from the National Airspace System (NAS) Human Factors Branch (ACT-530) of the Federal Aviation Administration William J. Hughes Technical Center conducted an evaluation of the NAS Infrastructure Management System (NIMS) Build ...

Report: Results of Technical Network Vulnerability Assessment: EPA’s Ronald Reagan Building

EPA Pesticide Factsheets

Report #10-P-0212, September 7, 2010. Vulnerability testing of EPA’s Ronald Reagan Building network conducted in June 2010 identified Internet Protocol addresses with numerous high-risk and medium-risk vulnerabilities.

Technical Support Document: Development of the Advanced Energy Design Guide for Large Hospitals - 50% Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonnema, E.; Leach, M.; Pless, S.

2013-06-01

This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Large Hospitals: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-LH) ASHRAE et al. (2011b). The AEDG-LH is intended to provide recommendations for achieving 50% whole-building energy savings in large hospitals over levels achieved by following Standard 90.1-2004. The AEDG-LH was created for a 'standard' mid- to large-size hospital, typically at least 100,000 ft2, but the strategies apply to all sizes and classifications of new construction hospital buildings. Its primary focus is new construction, but recommendations may be applicablemore » to facilities undergoing total renovation, and in part to many other hospital renovation, addition, remodeling, and modernization projects (including changes to one or more systems in existing buildings).« less

75 FR 31433 - Science Advisory Board Staff Office; Notification of a Public Meeting of the SAB Lead Review Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-03

... Lead Review Panel to provide a consultation on EPA's draft technical analyses that will be used to...-to-face meeting to provide a consultation on EPA's draft technical analyses that will be used to... buildings. In the future, EPA will also develop draft technical analyses to support the development of lead...

Shortening the decade-long gap between adult and paediatric drug formulations: a new framework based on the HIV experience in low- and middle-income countries.

PubMed

Penazzato, Martina; Lewis, Linda; Watkins, Melynda; Prabhu, Vineet; Pascual, Fernando; Auton, Martin; Kreft, Wesley; Morin, Sébastien; Vicari, Marissa; Lee, Janice; Jamieson, David; Siberry, George K

2018-02-01

Despite the coordinated efforts by several stakeholders to speed up access to HIV treatment for children, development of optimal paediatric formulations still lags 8 to 10 years behind that of adults, due mainly to lack of market incentives and technical complexities in manufacturing. The small and fragmented paediatric market also hinders launch and uptake of new formulations. Moreover, the problems affecting HIV similarly affect other disease areas where development and introduction of optimal paediatric formulations is even slower. Therefore, accelerating processes for developing and commercializing optimal paediatric drug formulations for HIV and other disease areas is urgently needed. The Global Accelerator for Paediatric Formulations (GAP-f) is an innovative collaborative model that will accelerate availability of optimized treatment options for infectious diseases, such as HIV, tuberculosis and viral hepatitis, affecting children in low- and middle-income countries (LMICs). It builds on the HIV experience and existing efforts in paediatric drug development, formalizing collaboration between normative bodies, research networks, regulatory agencies, industry, supply and procurement organizations and funding bodies. Upstream, the GAP-f will coordinate technical support to companies to design and study optimal paediatric formulations, harmonize efforts with regulators and incentivize manufacturers to conduct formulation development. Downstream, the GAP-f will reinforce coordinated procurement and communication with suppliers. The GAP-f will be implemented in a three-stage process: (1) development of a strategic framework and promotion of key regulatory efficiencies; (2) testing of feasibility and results, building on the work of existing platforms such as the Paediatric HIV Treatment Initiative (PHTI) including innovative approaches to incentivize generic development and (3) launch as a fully functioning structure. GAP-f is a key partnership example enhancing North-South and international cooperation on and access to science and technology and capacity building, responding to Sustainable Development Goal (SDG) 17.6 (technology) and 17.9. (capacity-building). By promoting access to the most needed paediatric formulations for HIV and high-burden infectious diseases in low-and middle-income countries, GAP-f will support achievement of SDG 3.2 (infant mortality), 3.3 (end of AIDS and combat other communicable diseases) and 3.8 (access to essential medicines), and be an essential component of meeting the global Start Free, Stay Free, AIDS Free super-fast-track targets. © 2018 World Health Organization; licensee IAS.

3. PHOTOCOPY OF DRAWING (1960 ARCHITECTURAL DRAWING BY THE RALPH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. PHOTOCOPY OF DRAWING (1960 ARCHITECTURAL DRAWING BY THE RALPH M. PARSONS COMPANY) FLOOR PLAN, ELEVATIONS, AND SECTION FOR THE SAMOS TECHNICAL SUPPORT BUILDING (BLDG. 761; NOW CALLED SLC-3 AIR FORCE BUILDING), SHEET A14 - Vandenberg Air Force Base, Space Launch Complex 3, SLC-3 Air Force Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

4. PHOTOCOPY OF DRAWING (1960 CIVIL ENGINEERING DRAWING THE THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. PHOTOCOPY OF DRAWING (1960 CIVIL ENGINEERING DRAWING THE THE RALPH M. PARSONS COMPANY) PLOT AND UTILITY PLAN FOR THE SAMOS TECHNICAL SUPPORT BUILDING (BLDG. 761; NOW CALLED SLC-3 AIR FORCE BUILDING), SHEET C47 - Vandenberg Air Force Base, Space Launch Complex 3, SLC-3 Air Force Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

iVirtualWorld: A Domain-Oriented End-User Development Environment for Building 3D Virtual Chemistry Experiments

ERIC Educational Resources Information Center

Zhong, Ying

2013-01-01

Virtual worlds are well-suited for building virtual laboratories for educational purposes to complement hands-on physical laboratories. However, educators may face technical challenges because developing virtual worlds requires skills in programming and 3D design. Current virtual world building tools are developed for users who have programming…

Solar Heating and Cooling of Buildings (Phase O). Volume 1: Executive Summary.

ERIC Educational Resources Information Center

TRW Systems Group, Redondo Beach, CA.

The purpose of this study was to establish the technical and economic feasibility of using solar energy for the heating and cooling of buildings. Five selected building types in 14 selected cities were used to determine loads for space heating, space cooling and dehumidification, and domestic service hot water heating. Relying on existing and…

Rapid Radiochemical Method for Radium-226 in Building ...

EPA Pesticide Factsheets

Technical Fact Sheet Analysis Purpose: Qualitative analysis Technique: Alpha spectrometry Method Developed for: Radium-226 in building materials Method Selected for: SAM lists this method for qualitative analysis of radium-226 in concrete or brick building materials Summary of subject analytical method which will be posted to the SAM website to allow access to the method.

Rapid Radiochemical Method for Americium-241 in Building ...

EPA Pesticide Factsheets

Technical Fact Sheet Analysis Purpose: Qualitative analysis Technique: Alpha spectrometry Method Developed for: Americium-241 in building materials Method Selected for: SAM lists this method for qualitative analysis of americium-241 in concrete or brick building materials. Summary of subject analytical method which will be posted to the SAM website to allow access to the method.

46. CAPE COD AIR STATION PAVE PAWS FACILITY BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

46. CAPE COD AIR STATION PAVE PAWS FACILITY - BUILDING ELEVATION VIEW WITH ALL METAL SIDING INSTALLED AND WITH EMITTER/ANTENNA ARRAY SYSTEM NEARING OCMPLETION ON "B" FACE (RIGHT). VIEW ALSO SHOWS TRAVELING "CLEANING" SYSTEM ON "B" FACE - NOW REMOVED. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Building & Property Maintenance. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). 2002 Revision.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document presents an overview of the 2-year competency-based building and property maintenance programs offered in Ohio schools at the secondary and/or adult levels. The overview covers the attributes and qualifications required to be a successful worker in the industry and the typical tasks performed by building and property maintenance…

Seismic Vulnerability Evaluations Within The Structural And Functional Survey Activities Of The COM Bases In Italy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zuccaro, G.; Cacace, F.; Albanese, V.

The paper describes technical and functional surveys on COM buildings (Mixed Operative Centre). This activity started since 2005, with the contribution of both Italian Civil Protection Department and the Regions involved. The project aims to evaluate the efficiency of COM buildings, checking not only structural, architectonic and functional characteristics but also paying attention to surrounding real estate vulnerability, road network, railways, harbours, airports, area morphological and hydro-geological characteristics, hazardous activities, etc. The first survey was performed in eastern Sicily, before the European Civil Protection Exercise 'EUROSOT 2005'. Then, since 2006, a new survey campaign started in Abruzzo, Molise, Calabria andmore » Puglia Regions. The more important issue of the activity was the vulnerability assessment. So this paper deals with a more refined vulnerability evaluation technique by means of the SAVE methodology, developed in the 1st task of SAVE project within the GNDT-DPC programme 2000-2002 (Zuccaro, 2005); the SAVE methodology has been already successfully employed in previous studies (i.e. school buildings intervention programme at national scale; list of strategic public buildings in Campania, Sicilia and Basilicata). In this paper, data elaborated by SAVE methodology are compared with expert evaluations derived from the direct inspections on COM buildings. This represents a useful exercise for the improvement either of the survey forms or of the methodology for the quick assessment of the vulnerability.« less

The Design, Planning and Control of Robotic Systems in Space

NASA Technical Reports Server (NTRS)

Dubowsky, Steven

1996-01-01

In the future, robotic systems will be expected to perform important tasks in space, in orbit and in planetary exploration. In orbit, current technology requires that tasks such as the repair, construction and maintenance of space stations and satellites be performed by astronaut Extra Vehicular Activity (EVA). Eliminating the need for astronaut EVA through the use of space manipulators would greatly reduce both mission costs and hazards to astronauts. In planetary exploration, cost and logistical considerations clearly make the use of autonomous and telerobotic systems also very attractive, even in cases where an astronaut explorer might be in the area. However, such applications introduce a number of technical problems not found in conventional earth-bound industrial robots. To design useful and practical systems to meet the needs of future space missions, substantial technical development is required, including in the areas of the design, control and planning. The objectives of this research program were to develop such design paradigms and control and planning algorithms to enable future space robotic systems to meet their proposed mission objectives. The underlying intellectual focus of the program is to construct a set of integrated design, planning and control techniques based on an understanding of the fundamental mechanics of space robotic systems. This work was to build upon the results obtained in our previous research in this area supported by NASA Langley Research Center in which we have made important contributions to the area of space robotics.

GREEN KIT: A MODULAR, VARIABLE APPLICATION SYSTEM FOR SUSTAINABLE COOLING

EPA Science Inventory

Definition of technical challenge to sustainability One of the challenges to sustainability is to build shelters that provide human comfort (people) using limited resources (prosperity) and minimum environment impact (planet). Current practices in building ...

Building America Systems Integration Research Annual Report: FY 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gestwick, M.

2013-05-01

This document is the Building America FY2012 Annual Report, which includes an overview of the Building America Program activities and the work completed by the National Renewable Energy Laboratory and the Building America industry consortia (the Building America teams). The annual report summarizes major technical accomplishments and progress towards U.S. Department of Energy Building Technologies Program's multi-year goal of developing the systems innovations that enable risk-free, cost effective, reliable and durable efficiency solutions that reduce energy use by 30%-50% in both new and existing homes.

30. SITE BUILDING 002 SCANNER BUILDING FLOOR 3A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

30. SITE BUILDING 002 - SCANNER BUILDING - FLOOR 3A ("A" FACE) INTERIOR BETWEEN GRIDS 17-A1 AND 18-A1, SHOWING REAR OF RADAR EMITTER ELECTRONIC INTERFACE TERMINAL NO. 3147-20, "RECEIVER TRANSMITTER RADAR" MODULE. VIEW IS ALSO SHOWING BUILDING FIRE STOP MATERIAL AT BOTTOM OF FLOOR. NOTE: WALL SLOPES BOTTOM TO TOP INWARD; STRUCTURAL ELEMENT IN FOREGROUND. VIEW ALSO SHOWS PIPING GRID OF CHILLED WATER LINES FOR ELECTRONIC SYSTEMS COOLING. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Turning Technologies into Businesses- The Challenge for the Technical Entrepreneur

NASA Astrophysics Data System (ADS)

Glass, Alexander

2000-03-01

Over the past twenty-five years, new businesses based on innovative technology have been the driving force for the US economy. Due to the abundance of early-stage capital, each year, thousands of scientists and engineers receive support to start new, technology-based businesses. However, the transition from technologist to entrepreneur is often difficult. It requires a shift in emphasis from a technology focus to a market focus. We shall discuss the challenges facing the technical entrepreneur in launching a new enterprise, and a variety of resources that are available to help the entrepreneur succeed. Many technologists fall victim to the myth that if you ``build a better mousetrap, the world will beat a path to your door." To be sure, it is important to base your business on sound technology that offers a clear advantage over current practice, and, if possible, to secure title to the technology, either by obtaining patent protection, or securing an exclusive license. Once that is done, however, the principal concern of the fledgling enterprise is building a business and obtaining the financial resources to enable it to grow. The entrepreneur must develop a clear and compelling business model, that can be communicated to a non-technical investor in a few minutes. This requires a mode of thinking and expression quite different from that commonly used in engineering or scientific discussions. Fortunately, abundant resources are available to help the technologist become a successful entrepreneur. We shall discuss the kinds of assistance that are generally available through local and national programs, and give specific examples based on the activities of the Bay Area Regional Technology Alliance in northern California.

The Undergraduate Student Instrument Project (USIP) - building the STEM workforce by providing exciting, multi-disciplinary, student-led suborbital flight projects.

NASA Astrophysics Data System (ADS)

Dingwall, B. J.

2015-12-01

NASA's Science Mission Directorate (SMD) recognizes that suborbital carriers play a vital role in training our country's future science and technology leaders. SMD created the Undergraduate Student Instrument Project (USIP) to offer students the opportunity to design, build, and fly instruments on NASA's unique suborbital research platforms. This paper explores the projects, the impact, and the lessons learned of USIP. USIP required undergraduate teams to design, build, and fly a scientific instrument in 18 months or less. Students were required to form collaborative multidisciplinary teams to design, develop and build their instrument. Teams quickly learned that success required skills often overlooked in an academic environment. Teams quickly learned to share technical information in a clear and concise manner that could be understood by other disciplines. The aggressive schedule required team members to hold each other accountable for progress while maintaining team unity. Unanticipated problems and technical issues led students to a deeper understanding of the need for schedule and cost reserves. Students exited the program with a far deeper understanding of project management and team dynamics. Through the process of designing and building an instrument that will enable new research transforms students from textbook learners to developers of new knowledge. The initial USIP project funded 10 undergraduate teams that flew a broad range of scientific instruments on scientific balloons, sounding rockets, commercial rockets and aircraft. Students were required to prepare for and conduct the major reviews that are an integral part of systems development. Each project conducted a Preliminary Design Review, Critical Design Review and Mission Readiness review for NASA officials and flight platform providers. By preparing and presenting their designs to technical experts, the students developed a deeper understanding of the technical and programmatic project pieces that were necessary for success. A student survey was conducted to assess the impact of USIP. Over 90% of students reported a significant improvement in their technical and project management skills. Perhaps more importantly, 88% of students reported that they have a far better appreciation for the value of multi-disciplinary teams.

47 CFR 22.377 - Certification of transmitters.

Code of Federal Regulations, 2011 CFR

2011-10-01

... MOBILE SERVICES Operational and Technical Requirements Technical Requirements § 22.377 Certification of transmitters. Except as provided in paragraph (b) of this section, transmitters used in the Public Mobile Services, including those used with signal boosters, in-building radiation systems and cellular repeaters...

Predictors of employer satisfaction: technical and non-technical skills.

PubMed

Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

2012-01-01

Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

Smoothing the way to opportunity in Peru.

PubMed

Valdivia, B

1999-11-01

Since 1990, poor women in Peru have suffered from the impact of structural adjustment policies, which have lead to low wages, poor working conditions, and a general deterioration in the status of women workers. To address these problems, the Asociacion Aurora Vivar began its Alternative Technical Training Program for Women in July 1992, with the aim of increasing the entrepreneurial skills of women. The project aimed to support women who have problems at work, those who are unemployed and those with low income. Moreover, the project sought to increase women's participation in nontraditional areas of work. Training focused on increasing women's technical skills, including the repair of home appliances, and on personal development, such as leadership skills, confidence building, and business management. The project attracted a diverse group of women who took part in the training for a variety of reasons. The women's new capacities and skills create a positive image for them within the household. Aurora Vivar acknowledges the importance of vocational education to increase women's opportunities to earn a living. The association is proposing reforms in the educational system to introduce courses on business management, credit, and other technical skills as part of the formal education system.

A Novel Model for Teaching Primary Care in a Community Practice Setting: Tufts at Tech Community Veterinary Clinic.

PubMed

McCobb, Emily; Rozanski, Elizabeth A; Malcolm, Elizabeth L; Wolfus, Gregory; Rush, John E

Providing veterinary students with opportunities to develop clinical skills in a realistic, hands-on environment remains a challenge for veterinary education. We have developed a novel approach to teaching clinical medicine to fourth-year veterinary students and technical high school students via development of a primary care clinic embedded within a technical high school. The primary care clinic targets an underserved area of the community, which includes many of the participating high school students. Support from the veterinary community for the project has been strong as a result of communication, the opportunity for veterinarians to volunteer in the clinic, and the careful targeting of services. Benefits to veterinary students include the opportunity to build clinical competencies and confidence, as well as the exposure to a diverse client population. The financial model of the clinic is described and initial data on outcomes for case load, clinic income, veterinary student evaluations, and high school students' success in passing the veterinary assisting examination are reported. This clinical model, involving a partnership between a veterinary school and a technical high school, may be adoptable to other clinical teaching situations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Alastair; Regnier, Cindy; Settlemyre, Kevin

Massachusetts Institute of Technology (MIT) partnered with the U.S. Department of Energy (DOE) to develop and implement solutions to retrofit existing buildings to reduce energy consumption by at least 30% as part of DOE’s Commercial Building Partnerships (CBP) Program.1 Lawrence Berkeley National Laboratory (LBNL) provided technical expertise in support of this DOE program. MIT is one of the U.S.’s foremost higher education institutions, occupying a campus that is nearly 100 years old, with a building floor area totaling more than 12 million square feet. The CBP project focused on improving the energy performance of two campus buildings, the Ray andmore » Maria Stata Center (RMSC) and the Building W91 (BW91) data center. A key goal of the project was to identify energy saving measures that could be applied to other buildings both within MIT’s portfolio and at other higher education institutions. The CBP retrofits at MIT are projected to reduce energy consumption by approximately 48%, including a reduction of around 72% in RMSC lighting energy and a reduction of approximately 55% in RMSC server room HVAC energy. The energy efficiency measure (EEM) package proposed for the BW91 data center is expected to reduce heating, ventilation, and air-conditioning (HVAC) energy use by 30% to 50%, depending on the final air intake temperature that is established for the server racks. The RMSC, an iconic building designed by Frank Gehry, houses the Computer Science and Artificial Intelligence Laboratory, the Laboratory for Information and Decision Systems, and the Department of Linguistics and Philosophy.« less

Automotive Fuel Economy: A Technical Study and Curriculum Development Project. A Thesis Presented to the Faculty of the College of Education, Mankato State University.

ERIC Educational Resources Information Center

Ready, Kirk Lewis

Automotive fuel economy was the topic of a study during which technical and background information was gathered, curriculum materials were sought, and curricula were developed. Technical information came from written materials and actual mileage tests of selected factors. Background came from written materials, field trips, and building and…

Nanotechnology on a dime: building affordable research facilities

NASA Astrophysics Data System (ADS)

DiBattista, Jeff; Clare, Donna; Lynch, David

2005-08-01

Designing buildings to house nanotechnology research presents a multitude of well-recognized challenges to architectural and engineering design teams, from environmental control to spatial arrangements to operational functionality. These technical challenges can be solved with relative ease on projects with large budgets: designers have the option of selecting leading-edge systems without undue regard for their expense. This is reflected in the construction cost of many nanotechnology research facilities that run well into the hundreds of millions of dollars. Smaller universities and other institutions need not be shut out of the nanotechnology research field simply because their construction budgets are tens of millions of dollars or less. The key to success for these less expensive projects lies with making good strategic decisions: identifying priorities for the facility in terms of what it will is--and will not--provide to the researchers. Making these strategic decisions puts bounds on the tactical, technical problems that the design team at large must address, allowing them to focus their efforts on the key areas for success. The process and challenges of this strategic decision-making process are examined, with emphasis placed on the types of decisions that must be made and the factors that must be considered when making them. Case study examples of projects undertaken at the University of Alberta are used to illustrate how strategic-level decision-making sets the stage for cutting-edge success on a modest budget.

Design for Deconstruction (DfD): Critical success factors for diverting end-of-life waste from landfills.

PubMed

Akinade, Olugbenga O; Oyedele, Lukumon O; Ajayi, Saheed O; Bilal, Muhammad; Alaka, Hafiz A; Owolabi, Hakeem A; Bello, Sururah A; Jaiyeoba, Babatunde E; Kadiri, Kabir O

2017-02-01

The aim of this paper is to identify Critical Success Factors (CSF) needed for effective material recovery through Design for Deconstruction (DfD). The research approach employed in this paper is based on a sequential exploratory mixed method strategy. After a thorough review of literature and conducting four Focus Group Discussion (FGDs), 43 DfD factors were identified and put together in a questionnaire survey. Data analyses include Cronbach's alpha reliability analysis, mean testing using significance index, and exploratory factor analysis. The result of the factor analysis reveals that an underlying factor structure of five DfD factors groups that include 'stringent legislation and policy', 'deconstruction design process and competencies', 'design for material recovery', 'design for material reuse', and 'design for building flexibility'. These groups of DfD factor groups show that the requirements for DfD goes beyond technical competencies and that non-technical factors such as stringent legislation and policy and design process and competency for deconstruction are key in designing deconstructable buildings. Paying attention to the factors identified in all of these categories will help to tackle impediments that could hinder the effectiveness of DfD. The results of this study would help design and project managers to understand areas of possible improvement in employing DfD as a strategy for diverting waste from landfills. Copyright © 2016 Elsevier Ltd. All rights reserved.

BEYOND GREEN BUILDINGS: AN INTEGRATED HOLISTIC DESIGN APPROACH

EPA Science Inventory

Technical Challenge: The Urban Sustainable Infrastructure Engineering Program (USIEP) at the University of Colorado at Denver is designing a Sustainable Youth Zone (SYZ) building in a disadvantaged community in Commerce City, CO. The SYZ utilizes a holistic ...

10 CFR 455.133 - Forwarding of applications from institutions and coordinating agencies for technical assistance...

Code of Federal Regulations, 2010 CFR

2010-01-01

....131. If ranking has been employed, the list shall include the standings of buildings or measures. (1) Measure-by-measure rankings will be recombined for the respective buildings with more than one recommended...

20 CFR 628.325 - Incentive grants, capacity building, and technical assistance.

Code of Federal Regulations, 2011 CFR

2011-04-01

... for the development of Statewide communications and training mechanisms involving computer-based communication technologies that directly facilitate interaction with the National Capacity Building and... section 205(a) of the Act, in developing electronic communications, training mechanisms and/or...

20 CFR 628.325 - Incentive grants, capacity building, and technical assistance.

Code of Federal Regulations, 2012 CFR

2012-04-01

... for the development of Statewide communications and training mechanisms involving computer-based communication technologies that directly facilitate interaction with the National Capacity Building and... section 205(a) of the Act, in developing electronic communications, training mechanisms and/or...

Analysis and Risk Evaluation on the Case of Alteration, Revitalization and Conversion of a Historic Building in Gdańsk

NASA Astrophysics Data System (ADS)

Grzyl, Beata; Kristowski, Adam; Miszewska-Urbańska, Emilia

2017-10-01

Each investment plan, including the one concerning a building, is exposed to the consequences of various types of threats taking place. Therefore, in the case of some large-scale, atypical and complicated building ventures, some actions included in the procedure of risk management should be taken (identifications, analysis, measurements, control and supervision of the risk). This will allow for the risk to be eliminated or limited. While preparing a building venture, an investor does not possess full information about the course of events on each stage of investment completion. The identification of the above-mentioned unknowns, subjecting them to quantification and specifying the method of dealing with them, allows an investor to increase the effectiveness of the intended plan. The enterprise discussed in this article and analyzed in the context of risk, concerns alteration, revitalization and conversion for office purposes of two buildings located in Gdańsk at 1 and 2 Lastadia Street. These buildings are situated on the area of historical urban layout of Gdańsk, in the northern-eastern part of Stare Przedmieście District (Old Suburb), about 800 meters south from Dlugi Targ Street and 200 meters west from The Old Motława River. The investor is “Gdańskie Melioracje Ltd.”, a limited liability company, which belongs to the Council of Gdańsk. In order to increase the effectiveness of the intended investment venture, while organizing the investment process, the investor commissioned preparation of an analysis and risk evaluation connected with the above-mentioned intention. Based on an on-site visit, the opinions of experts, who have been involved in the process of the preparation of the investment, studies of the available monographies about the technical condition of the buildings at 1 and 2 Lastadia Street and their own experiences, the authors identified 54 types of relevant risks, which have been systematized into 10 subject groups (among others- investor’s risk due to the designing process, location of the investment, third party or investor business activity, force majeure, political, legal, financial, technical). The scope of the study includes the identification, analysis and risk evaluation connected with planning and completion of alteration, revitalization and conversion of a historic building located at 2 Lastadia Street for the office purposes. The risk has been analyzed from the investor’s perspective. The authors used a method of preliminary analysis and risk evaluation PHA (Preliminary Hazard Analysis) and the expert method.

Technical Feasible Study for Future Solar Thermal Steam Power Station in Malaysia

NASA Astrophysics Data System (ADS)

Bohari, Z. H.; Atira, N. N.; Jali, M. H.; Sulaima, M. F.; Izzuddin, T. A.; Baharom, M. F.

2017-10-01

This paper proposed renewable energy which is potential to be used in Malaysia in generating electricity to innovate and improve current operating systems. Thermal and water act as the resources to replace limited fossil fuels such as coal which is still widely used in energy production nowadays. Thermal is also known as the heat energy while the water absorbs energy from the thermal to produce steam energy. By combining both of the sources, it is known as thermal steam renewable energy. The targeted area to build this power station has constant high temperature and low humidity which can maximize the efficiency of generating power.

SWIFT Differentiated Technical Assistance. White Paper

ERIC Educational Resources Information Center

McCart, Amy; McSheehan, Michael; Sailor, Wayne; Mitchiner, Melinda; Quirk, Carol

2016-01-01

The Schoolwide Integrated Framework for Transformation (SWIFT) employs six technical assistance (TA) practices that support an initial transformation process while simultaneously building system capacity to sustain and scale up equity-based inclusion in additional schools and districts over time. This paper explains these individual practices and…

Responding to Changes in Building Legislation. Updating Training for the Building Regulations 1985 and Supporting Documents.

ERIC Educational Resources Information Center

Harris, Robert; Phillips, Alan

A project sought to develop a means of updating and retraining those required to comply with Britain's 1985 Building Regulations, which are substantially different from the previous ones in regard to procedures and technical content. The training needs analysis conducted indicated that the new training should be flexible and use practical and…

Capacity building for health inequality monitoring in Indonesia: enhancing the equity orientation of country health information system.

PubMed

Hosseinpoor, Ahmad Reza; Nambiar, Devaki; Tawilah, Jihane; Schlotheuber, Anne; Briot, Benedicte; Bateman, Massee; Davey, Tamzyn; Kusumawardani, Nunik; Myint, Theingi; Nuryetty, Mariet Tetty; Prasetyo, Sabarinah; Suparmi; Floranita, Rustini

Inequalities in health represent a major problem in many countries, including Indonesia. Addressing health inequality is a central component of the Sustainable Development Goals and a priority of the World Health Organization (WHO). WHO provides technical support for health inequality monitoring among its member states. Following a capacity-building workshop in the WHO South-East Asia Region in 2014, Indonesia expressed interest in incorporating health-inequality monitoring into its national health information system. This article details the capacity-building process for national health inequality monitoring in Indonesia, discusses successes and challenges, and how this process may be adapted and implemented in other countries/settings. We outline key capacity-building activities undertaken between April 2016 and December 2017 in Indonesia and present the four key outcomes of this process. The capacity-building process entailed a series of workshops, meetings, activities, and processes undertaken between April 2016 and December 2017. At each stage, a range of stakeholders with access to the relevant data and capacity for data analysis, interpretation and reporting was engaged with, under the stewardship of state agencies. Key steps to strengthening health inequality monitoring included capacity building in (1) identification of the health topics/areas of interest, (2) mapping data sources and identifying gaps, (3) conducting equity analyses using raw datasets, and (4) interpreting and reporting inequality results. As a result, Indonesia developed its first national report on the state of health inequality. A number of peer-reviewed manuscripts on various aspects of health inequality in Indonesia have also been developed. The capacity-building process undertaken in Indonesia is designed to be adaptable to other contexts. Capacity building for health inequality monitoring among countries is a critical step for strengthening equity-oriented national health information systems and eventually tackling health inequities.

Rooftop Solar Technical Potential for Low-to-Moderate Income Households in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sigrin, Benjamin O; Mooney, Meghan E

This report presents a first-of-kind assessment of the technical potential of rooftop solar for low and moderate-income households, as well as providing insight on the distribution of solar potential by tenure, income, and other building characteristics. We find that a substantial fraction of the national rooftop solar potential is located on LMI buildings and, for all incomes, a substantial fraction on multi-family and renter-occupied buildings. We also find that rooftop solar can significantly contribute to long-term penetration targets established by the U.S. DOE, though to do so requires deployment on multi-family and renter-occupied buildings. Traditional deployment models have insufficiently enabledmore » access to solar for these income groups and building types. Without innovation either in regulatory, market, or policy factors, a large fraction of the U.S. potential is unlikely to be addressed, as well as leading to inequalities in solar access. Ironically, potential electric bill savings from rooftop solar would have the greatest material impact on the lives of low-income households as compared to their high-income counterparts.« less

Rooftop Solar Technical Potential for Low-to-Moderate Income (LMI) Households

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sigrin, Benjamin O

This report presents a first-of-kind assessment of the technical potential of rooftop solar for low and moderate-income households, as well as providing insight on the distribution of solar potential by tenure, income, and other building characteristics. We find that a substantial fraction of the national rooftop solar potential is located on LMI buildings and, for all incomes, a substantial fraction on multi-family and renter-occupied buildings. We also find that rooftop solar can significantly contribute to long-term penetration targets established by the U.S. DOE, though to do so requires deployment on multi-family and renter-occupied buildings. Traditional deployment models have insufficiently enabledmore » access to solar for these income groups and building types. Without innovation either in regulatory, market, or policy factors, a large fraction of the U.S. potential is unlikely to be addressed, as well as leading to inequalities in solar access. Ironically, potential electric bill savings from rooftop solar would have the greatest material impact on the lives of low-income households as compared to their high-income counterparts.« less

American Recovery and Reinvestment Act (ARRA) Federal Energy Management Program Technical Assistance Project 279 IMCOM-Southeast Region: Redstone Arsenal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hatley, Darrel D.; Goddard, James K.

2010-09-30

Report describing a building retuning workshop presented to staff at Redstone Arsenal. Document includes issues identified during building audits and recommendations for future activities to reduce energy use at the site.

Technical Support Document: Development of the Advanced Energy Design Guide for Grocery Stores--50% Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hale, E. T.; Macumber, D. L.; Long, N. L.

2008-09-01

This report provides recommendations that architects, designers, contractors, developers, owners, and lessees of grocery store buildings can use to achieve whole-building energy savings of at least 50% over ASHRAE Standard 90.1-2004.

Technical and Occupational Shops. Volume II.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto. School Planning and Building Research Section.

The layouts and specifications provided are intended as a guide to school boards, educators, and architects. Drawings and room plans illustrate specifications for girls' occupational shop, graphic arts, carpentry (millwork and building construction shop), boys' occupational shop (mechanical), boys' occupational shop (building construction),…

Connected commercial vehicles-integrated truck project : vehicle build and build test plan, final technical report.

DOT National Transportation Integrated Search

2000-12-01

This paper brings together the findings of activities that addressed the impacts of nontechnical barriers and constraints that might impede the progress of Intelligent Transportation Systems (ITS) programs. It discusses how the planning and deploymen...

43. CAPE COD AIR STATION PAVE PAWS FACILITY WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

43. CAPE COD AIR STATION PAVE PAWS FACILITY - WITH BUILDING METAL SIDING BEING APPLIED ON "C" FACE (RIGHT) AND "B" FACE BEING PREPARED FOR INSTALLATION. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

RADON DIAGNOSTIC MEASUREMENT GUIDANCE FOR LARGE BUILDINGS - VOLUME 1. TECHNICAL REPORT

EPA Science Inventory

The report discusses the development of radon diagnostic procedures and mitigation strategies applicable to a variety of large non-residential buildings commonly found in Florida. The investigations document and evaluate the nature of radon occurrence and entry mechanisms for rad...

Unvented Attic Increases Energy Efficiency and Reduces Duct Losses: Pulte Homes - Sun Lake at Banning, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2001-10-01

New houses in the Sun Lakes at Banning subdivision are designed by Pulte Homes with technical support from the Building Science Consortium as part of the U.S. Department of Energy's Building America Program.

Using of Aerogel to Improve Thermal Insulating Properties of Windows

NASA Astrophysics Data System (ADS)

Valachova, Denisa; Zdrazilova, Nada; Panovec, Vladan; Skotnicova, Iveta

2018-06-01

For the best possible thermal-technical properties of building structures it is necessary to use materials with very low thermal conductivity. Due to the increasing thermal-technical requirements for building structures, the insulating materials are developed. One of the modern thermal insulating materials is so-called aerogel. Unfortunately, this material is not used in the field of external thermal insulation composite systems because of its price and its properties. The aim of this paper is to present possibilities of using this insulating material in the civil engineering - specifically a usage of aerogel in the production of windows.

Transmission Challenges and Best Practices for Cost-Effective Renewable Energy Delivery across State and Provincial Boundaries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Shengru; Hurlbut, David J.; Bird, Lori A.

A strategically planned transmission network is an important source of flexibility for the integration of large-scale renewable energy (RE). Such a network can offer access to a broad geographic diversity of resources, which can reduce flexibility needs and facilitate sharing between neighboring balancing areas. This report builds on two previous NREL technical reports - Advancing System Flexibility for High Penetration Renewable Integration (Milligan et al. 2015) and 'Renewables-Friendly' Grid Development Strategies (Hurlbut et al. 2015) - which discuss various flexibility options and provide an overview of U.S. market models and grid planning. This report focuses on addressing issues with cross-regional/provincialmore » transmission in China with the aim of integrating renewable resources that are concentrated in remote areas and require inter-regional/provincial power exchange.« less

The study on the spatial-temporal changes of land use pattern in eastern Sichuan basin based on RS/GIS

NASA Astrophysics Data System (ADS)

Sun, Siqi; Xiao, Yi; Guo, Luo

2018-02-01

Eastern Sichuan Basin is one of the areas sensitive to global climate change. Due to impacts from human disturbance, the farmland in the study area has been degrading, and the desertification of land has been expanding rapidly. Based on the data of Landsat TM/ETM image in 1990, 1995, 2000, 2005 and 2010, this thesis analysed the spatial characteristics and dynamic trends of land use pattern in eastern Sichuan basin using software for remote sense and geographical information system. The driving factors of land-use change in study area were also discussed. The results indicated that: (i) the area of farmland has significantly decreased because of degradation and conversion from grassland into building land; (ii) farmland patches have changed into fragmented and isolated ones; (iii) the main landscapes in study area, are farmland and forests; (iv) land-use change is significantly associated with the human activities. This study provides a strong theoretical and technical basis for the policy-making of environmental protection and management in Eastern Sichuan Basin of Sichuan Province in china.

Building Code Compliance and Enforcement: The Experience of SanFrancisco's Residential Energy Conservation Ordinanace and California'sBuildign Standards for New Construction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vine, E.

1990-11-01

As part of Lawrence Berkeley Laboratory's (LBL) technical assistance to the Sustainable City Project, compliance and enforcement activities related to local and state building codes for existing and new construction were evaluated in two case studies. The analysis of the City of San Francisco's Residential Energy Conservation Ordinance (RECO) showed that a limited, prescriptive energy conservation ordinance for existing residential construction can be enforced relatively easily with little administrative costs, and that compliance with such ordinances can be quite high. Compliance with the code was facilitated by extensive publicity, an informed public concerned with the cost of energy and knowledgeablemore » about energy efficiency, the threat of punishment (Order of Abatement), the use of private inspectors, and training workshops for City and private inspectors. The analysis of California's Title 24 Standards for new residential and commercial construction showed that enforcement of this type of code for many climate zones is more complex and requires extensive administrative support for education and training of inspectors, architects, engineers, and builders. Under this code, prescriptive and performance approaches for compliance are permitted, resulting in the demand for alternative methods of enforcement: technical assistance, plan review, field inspection, and computer analysis. In contrast to existing construction, building design and new materials and construction practices are of critical importance in new construction, creating a need for extensive technical assistance and extensive interaction between enforcement personnel and the building community. Compliance problems associated with building design and installation did occur in both residential and nonresidential buildings. Because statewide codes are enforced by local officials, these problems may increase over time as energy standards change and become more complex and as other standards (eg, health and safety codes) remain a higher priority. The California Energy Commission realizes that code enforcement by itself is insufficient and expects that additional educational and technical assistance efforts (eg, manuals, training programs, and toll-free telephone lines) will ameliorate these problems.« less

BUILDING 122 CONTAINS THREE GENERAL AREAS: OFFICE AREAS, INTERNAL DOSIMETRY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

BUILDING 122 CONTAINS THREE GENERAL AREAS: OFFICE AREAS, INTERNAL DOSIMETRY, AND MEDICAL/HEALTH. BUILDING 122 SHARES A COMMON WALL WITH BUILDING 121, THE PLANT SECURITY BUILDING. THE TWO-STORY BUILDING IN THE BACKGROUND IS BUILDING 111. (9/26/52) - Rocky Flats Plant, Emergency Medical Services Facility, Southwest corner of Central & Third Avenues, Golden, Jefferson County, CO

Low-cost housing design and provision: A case study of Kenya

NASA Astrophysics Data System (ADS)

Kabo, Felichism W.

Shelter is as basic a human need as food and water. Today, many people in Third World countries live in sub-standard housing, or lack shelter altogether. Prior research addresses either one of two housing dimensions: broader provision processes, or specific aspects of design. This dissertation is an effort at addressing both dimensions, the underlying premise being that their inter-connectedness demands an integrative approach. More specifically, this dissertation is a combined strategy case study of housing design and provision in Kenya, a sub-Saharan African country with serious shelter problems. A majority of Kenya's urban population lives in slums or squatter settlements. This dissertation covers four major areas of housing design and provision in Kenya: building materials, user preferences for building materials and housing designs, interior layouts, and the organizational context of the housing sector. These four areas are theoretically unified by Canter's (1977) model of place. Each of the first three areas (housing design) relates to one or more of the three domains in the model. The fourth area (housing provision) pertains to the model's context and framework. The technical building materials research reveals the feasibility of making low-cost materials (soil-cements) with satisfactory engineering performance. The research in preference for building materials reveals that the two independent variables, soil and mix, have a significant effect on potential users' ratings. The housing preference study reveals that of the four independent variables, design and type had a significant effect on potential users' ratings, while materials and construction method did not have a significant effect. The interior layout studies reveal important associations between spatial configurations and a key space (the kitchen), and between configuration and conceptualizations of living, cooking, and sleeping spaces. The findings from the studies of preferences and interior layouts are then synthesized in the development of a low-cost housing prototype. Lastly, analysis of the organizational context reveals notable links between nominal housing-related responsibilities, and the potential power and influence of key organizations. The potential effects of the spatial context on housing organizations are also explored. Later, the key organizations are restructured to address shortcomings identified at the organizational and sectoral levels.

Inter-organisational communication networks in healthcare: centralised versus decentralised approaches

PubMed Central

Pirnejad, Habibollah; Bal, Roland; Stoop, Arjen P.; Berg, Marc

2007-01-01

Background To afford efficient and high quality care, healthcare providers increasingly need to exchange patient data. The existence of a communication network amongst care providers will help them to exchange patient data more efficiently. Information and communication technology (ICT) has much potential to facilitate the development of such a communication network. Moreover, in order to offer integrated care interoperability of healthcare organizations based upon the exchanged data is of crucial importance. However, complications around such a development are beyond technical impediments. Objectives To determine the challenges and complexities involved in building an Inter-organisational Communication network (IOCN) in healthcare and the appropriations in the strategies. Case study Interviews, literature review, and document analysis were conducted to analyse the developments that have taken place toward building a countrywide electronic patient record and its challenges in The Netherlands. Due to the interrelated nature of technical and non-technical problems, a socio-technical approach was used to analyse the data and define the challenges. Results Organisational and cultural changes are necessary before technical solutions can be applied. There are organisational, financial, political, and ethicolegal challenges that have to be addressed appropriately. Two different approaches, one “centralised” and the other “decentralised” have been used by Dutch healthcare providers to adopt the necessary changes and cope with these challenges. Conclusion The best solutions in building an IOCN have to be drawn from both the centralised and the decentralised approaches. Local communication initiatives have to be supervised and supported centrally and incentives at the organisations' interest level have to be created to encourage the stakeholder organisations to adopt the necessary changes. PMID:17627296

Inter-organisational communication networks in healthcare: centralised versus decentralised approaches.

PubMed

Pirnejad, Habibollah; Bal, Roland; Stoop, Arjen P; Berg, Marc

2007-05-16

To afford efficient and high quality care, healthcare providers increasingly need to exchange patient data. The existence of a communication network amongst care providers will help them to exchange patient data more efficiently. Information and communication technology (ICT) has much potential to facilitate the development of such a communication network. Moreover, in order to offer integrated care interoperability of healthcare organizations based upon the exchanged data is of crucial importance. However, complications around such a development are beyond technical impediments. To determine the challenges and complexities involved in building an Inter-organisational Communication network (IOCN) in healthcare and the appropriations in the strategies. Interviews, literature review, and document analysis were conducted to analyse the developments that have taken place toward building a countrywide electronic patient record and its challenges in The Netherlands. Due to the interrelated nature of technical and non-technical problems, a socio-technical approach was used to analyse the data and define the challenges. Organisational and cultural changes are necessary before technical solutions can be applied. There are organisational, financial, political, and ethicolegal challenges that have to be addressed appropriately. Two different approaches, one "centralised" and the other "decentralised" have been used by Dutch healthcare providers to adopt the necessary changes and cope with these challenges. The best solutions in building an IOCN have to be drawn from both the centralised and the decentralised approaches. Local communication initiatives have to be supervised and supported centrally and incentives at the organisations' interest level have to be created to encourage the stakeholder organisations to adopt the necessary changes.

Education & Collection Facility GSHP Demonstration Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joplin, Jeff

The Denver Museum of Nature & Science (DMNS) designed and implemented an innovative ground source heat pump (GSHP) system for heating and cooling its new Education and Collection Facility (ECF) building addition. The project goal was to successfully design and install an open-loop GSHP system that utilized water circulating within an underground municipal recycled (non-potable) water system as the heat sink/source as a demonstration project. The expected results were to significantly reduce traditional GSHP installation costs while increasing system efficiency, reduce building energy consumption, require significantly less area and capital to install, and be economically implemented wherever access to amore » recycled water system is available. The project added to the understanding of GSHP technology by implementing the first GSHP system in the United States utilizing a municipal recycled water system as a heat sink/source. The use of this fluid through a GSHP system has not been previously documented. This use application presents a new opportunity for local municipalities to develop and expand the use of underground municipal recycled (non-potable) water systems. The installation costs for this type of technology in the building structure would be a cost savings over traditional GSHP costs, provided the local municipal infrastructure was developed. Additionally, the GSHP system functions as a viable method of heat sink/source as the thermal characteristics of the fluid are generally consistent throughout the year and are efficiently exchanged through the GSHP system and its components. The use of the recycled water system reduces the area required for bore or loop fields; therefore, presenting an application for building structures that have little to no available land use or access. This GSHP application demonstrates the viability of underground municipal recycled (non-potable) water systems as technically achievable, environmentally supportive, and an efficient system.« less

8. PHOTOCOPY OF DRAWING (1975 ELECTRICAL DRAWING BY THE RALPH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. PHOTOCOPY OF DRAWING (1975 ELECTRICAL DRAWING BY THE RALPH M. PARSONS COMPANY) ELECTRICAL PLAN AND DETAILS FOR BUILDING 762-A, SHEET E4 - Vandenberg Air Force Base, Space Launch Complex 3, Technical Support Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

7 CFR 1924.5 - Planning development work.

Code of Federal Regulations, 2014 CFR

2014-01-01

... cash to be furnished by the borrower, proceeds from cost sharing programs such as Agricultural...) Drawings, specifications, and estimates will fully describe the work. Technical data, tests, or engineering... building code. (i) Agricultural buildings that are not intended for human habitation are exempt from these...

7 CFR 1924.5 - Planning development work.

Code of Federal Regulations, 2013 CFR

2013-01-01

... cash to be furnished by the borrower, proceeds from cost sharing programs such as Agricultural...) Drawings, specifications, and estimates will fully describe the work. Technical data, tests, or engineering... building code. (i) Agricultural buildings that are not intended for human habitation are exempt from these...

7 CFR 1924.5 - Planning development work.

Code of Federal Regulations, 2012 CFR

2012-01-01

... cash to be furnished by the borrower, proceeds from cost sharing programs such as Agricultural...) Drawings, specifications, and estimates will fully describe the work. Technical data, tests, or engineering... building code. (i) Agricultural buildings that are not intended for human habitation are exempt from these...

Illinois Occupational Skill Standards: Information Technology Design/Build Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document contains Illinois Occupational Skill Standards for occupations in the Information Technology Design and Build Cluster (technical writer, programmer, system analyst, network architect, application product architect, network engineer, and database administrator). The skill standards define what an individual should know and the…

Architecture of high-rise buildings as a brand of the modern Kazakhstan

NASA Astrophysics Data System (ADS)

Abdrassilova, Gulnara; Kozbagarova, Nina; Tuyakayeva, Ainagul

2018-03-01

Using practical examples article reviews urban-planning and space-planning features of design and construction of high-rise buildings in Kazakhstan conditions; methods are identified that provide for structural stability against wind and seismic loads based on innovative technical and technological solutions. Article authors stress out the fashion function of high-rise buildings in the new capital of Kazakhstan, the Astana city.

Unvented Attic Increases Energy Efficiency and Reduces Duct Losses - Sun Lake at Banning, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, R.; Wells, N.

2001-09-05

New houses in the Sun Lakes at Banning subdivision are designed by Pulte Homes with technical support from the Building Science Consortium as part of the U.S. Department of Energy's Building America Program. These homes save their homeowners money by applying the principles of ''whole-building'' design, which considers the house as a complete system instead of separate components.

10 CFR 455.110 - Grant application submittals for technical assistance and energy conservation measures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... eligible applicant desiring to receive financial assistance (either from DOE directly, through a State... coordinating agencies for financial assistance for technical assistance programs shall include the... energy use evaluation required by the State pursuant to § 455.20(k) for each building for which financial...

10 CFR 455.110 - Grant application submittals for technical assistance and energy conservation measures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... eligible applicant desiring to receive financial assistance (either from DOE directly, through a State... coordinating agencies for financial assistance for technical assistance programs shall include the... energy use evaluation required by the State pursuant to § 455.20(k) for each building for which financial...

10 CFR 455.110 - Grant application submittals for technical assistance and energy conservation measures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... eligible applicant desiring to receive financial assistance (either from DOE directly, through a State... coordinating agencies for financial assistance for technical assistance programs shall include the... energy use evaluation required by the State pursuant to § 455.20(k) for each building for which financial...

10 CFR 455.110 - Grant application submittals for technical assistance and energy conservation measures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... eligible applicant desiring to receive financial assistance (either from DOE directly, through a State... coordinating agencies for financial assistance for technical assistance programs shall include the... energy use evaluation required by the State pursuant to § 455.20(k) for each building for which financial...

10 CFR 455.110 - Grant application submittals for technical assistance and energy conservation measures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... eligible applicant desiring to receive financial assistance (either from DOE directly, through a State... coordinating agencies for financial assistance for technical assistance programs shall include the... energy use evaluation required by the State pursuant to § 455.20(k) for each building for which financial...

Career and Technical Student Organizations: Building Our Future.

ERIC Educational Resources Information Center

Reese, Susan

2003-01-01

Provides a look at the history, structure, and role of career and technical student organizations: Business Professionals of America, SkillsUSA-VICA, DECA/Delta Epsilon Chi, Health Occupations Students of America, the Technology Student Association, Future Business Leaders of America-Phi Beta Lambda, FFA, and Family, Career, and Community Leaders…

Chattanooga State Technical Community College Marketing Plan 1981-82.

ERIC Educational Resources Information Center

Hoppe, Sherry; Haddock, David

Chattanooga State Technical Community College's (CSTCC's) marketing plan is presented in six parallel sections. The first of these deals with building the overall image of the college, increasing community awareness, and disseminating general information. The other five sections focus on marketing the following college programs and services:…

Build It and They Will Come: Addressing the Problem of Declining Entry-Level Skills.

ERIC Educational Resources Information Center

Koontz, Paul

2000-01-01

The growing gap between the skills of the work force and the technical requirements of today's jobs have reemphasized the need to transform the educational system to provide the solid academic and technical skills required by the jobs of today and tomorrow. (Author)

Bachelor of Applied Sciences: Outcomes Evaluation. Research Report No. 13-6

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2013

2013-01-01

Community and technical colleges (CTCs) play an important role in producing baccalaureate degree graduates in Washington State. Baccalaureate degrees that build upon the professional-technical associate degree provide expanded opportunities for both graduates and employers by providing the upper-division coursework in an applied field. Programs…

Legislative Priorities for the 105th Congress.

ERIC Educational Resources Information Center

National Association of State Directors of Vocational Technical Education Consortium.

The National Association of State Directors of Vocational Technical Education Consortium (NASDVTEC) supports enactment of legislation that is dedicated solely to vocational-technical education (VTE). NASDVTEC urges the 105th Congress to build on the existing foundation of a strong state role in VTE by drafting legislation that achieves the…

Building a Prosperous Economy. Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2014

2014-01-01

Washington's community and technical colleges are a collective, powerful, unmatched resource for advancing prosperity through education. These 34 colleges not only connect with employers in the regions where they operate, but also with each other through common programs--like advanced manufacturing and allied health--that align with Washington's…

Design Software Gives Rocketry a Boost in the Classroom

ERIC Educational Resources Information Center

Wilson, Spencer C.

2005-01-01

Building and launching model rockets makes a great activity for a technology education class. A model rocket curriculum provides a valuable tool for improving students' technical skills, including following technical instructions and procedures while learning about aerospace technology. This article describes a way of making model rocketry more…

Design Software Gives Rocketry a Boost in the Classroom

ERIC Educational Resources Information Center

Wilson, Spencer C.

2005-01-01

Building and launching model rockets makes a great activity for a technology education class. A model rocket curriculum provides a valuable tool for improving students' technical skills that includes, but is not limited to, following technical instructions and procedures while learning about aerospace technology. This article describes a way that…

Diversity and Utilization of Bamboo Plants in The Area of Hotel in Kedewatan Village, Ubud, Bali

NASA Astrophysics Data System (ADS)

Utami, N. W. F.; Pradnyawathi, N. L. M.

2017-10-01

Bamboo or tiying (Balinese language) is a widely used non-timber plant in Indonesia especially in Bali. The presence of bamboo appertains to its ethno-botanical function of bamboo especially for rituals. However, there are other utilization of bamboo which is naturally grown or intentionally planted. Kedewatan as a famous place in northern Ubud, Bali have many lavish hotels with its natural environment and appealing place. The aims of this study is to invent bamboo species diversity and bamboo utilization on private areas of hotel in Kedewatan. Methods used in this study was field survey with observation and interview technic. Observation was implemented by purposive sampling methods by selecting hotel which adjacent to Ayung and Wos rivers. Interview was conducted with some key persons in charge on managing hotel garden. In addition, bamboo species identification was established through literature study. The results show that there are eleven bamboo species found on the survey area with most commonly employed species in the area were tiying tali (Gigantochloa apus (J.A. & J.H. Schultes) Kurz.) and tiying gading (Phyllostachys sulphurea (Carr.) A. e.t. C. Riv.) which were belong to exotic species. The areas which bamboo cultivated were welcome area as a hedgerow and near hotel lobby, between, outside and inside villa buildings, and naturally grown in the riverbanks with a good landscaping arrangement. Bamboo plantations were utilized to adorn and support the quality of the hotel building as well as to conserve soil and water along Ayung and Wos river canyons. The other utilization of bamboo was to facilitate ritual activity in Kedewatan village. They are allowed to ask for limited amount of bamboo culms with condition not to damage the physical appearance and function that desired by the hotel manager or hotel owner.

CPTSC 2001: Managing Change and Growth in Technical and Scientific Communication. Proceedings of the Annual Conference of the Council for Programs in Technical and Scientific Communication (28th, Pittsburgh, Pennsylvania, October 11-13, 2001).

ERIC Educational Resources Information Center

Maylath, Bruce, Ed.

This proceedings presents 43 papers delivered at the 2001 annual meeting of the Council for Programs in Technical and Scientific Communication (CPTSC). Papers in the proceedings include the following: "Act IV: On Being Less Invisible" (Bill Karis); "Building a Community of Professional Communicators by Mapping Needs and Assets"…

Collaboration Nation: The Building of the Welsh Repository Network

ERIC Educational Resources Information Center

Knowles, Jacqueline

2010-01-01

Purpose: The purpose of this paper is to disseminate information about the Welsh Repository Network (WRN), innovative work being undertaken to build an integrated network of institutional digital repositories. A collaborative approach, in particular through the provision of centralised technical and organisational support, has demonstrated…

1300935

NASA Image and Video Library

2013-08-15

VINCENT VIDAURRI, CENTER, A TECHNICAL SPECIALIST WITH TELEDYNE BROWN ENGINEERING SUPPORTING MISSION OPERATIONS AT THE MARSHALL SPACE FLIGHT CENTER, PROVIDES DETAILS ABOUT A MOCK-UP OF THE INTERNATIONAL SPACE STATION SCIENCE LAB TO A GROUP OF AREA TEACHERS AS PART OF "BACK-2-SCHOOL DAY." TEAM REDSTONE -- WHICH INCLUDES THE MARSHALL SPACE FLIGHT CENTER AND U.S. ARMY ORGANIZATIONS ON REDSTONE ARSENAL -- INVITED 50 TEACHERS TO TOUR REDSTONE ARSENAL AUG. 15, GIVING THEM AN OPPORTUNITY TO LEARN OF AND SEE RESOURCES AVAILABLE TO THEM AND THEIR STUDENTS. THE TOUR FOCUSED ON SITES AVAILABLE FOR FIELD TRIPS FOR STUDENTS STUDYING MATH, SCIENCE, TECHNOLOGY AND ENGINEERING. STOPS INCLUDED MARSHALL'S PAYLOAD OPERATIONS INTEGRATION CENTER AND THE HIGH SCHOOLS UNITED WITH NASA TO CREATE HARDWARE LAB, OR HUNCH, BOTH LOCATED IN BUILDING 4663. THE PROGRAM GIVES HIGH SCHOOL STUDENTS THE CHANCE TO WORK WITH NASA ENGINEERS TO DESIGN AND BUILD HARDWARE FOR USE ON THE INTERNATIONAL SPACE STATION. THE TEACHERS ALSO VISITED THE ARMY AVIATION & MISSILE RESEARCH DEVELOPMENT & ENGINEERING CENTER AND THE REDSTONE TEST CENTER

[THE USE OF OPEN REAL ESTATE DATABASES FOR THE ANALYSIS OF INFLUENCE OF CONCOMITANT FACTORS ON THE STATE OF THE URBAN POPULATION'S HEALTH].

PubMed

Zheleznyak, E V; Khripach, L V

2015-01-01

There was suggested a new method of the assessment of certain social-lifestyle factors in hygienic health examination of the urban population, based on the work with the open real estate databases on residential areas of the given city. On the example of the Moscow FlatInfo portal for a sample of 140 residents of the city of Moscow there was studied the distribution of such available for analysis factors as a typical design of the building, where studied citizen resides, the year of its construction and the market price of 1m2 of housing space in this house. The latter value is a quantitative integrated assessment of the social and lifestyle quality of housing, depending on the type and technical condition of the building, neighborhood environment, infrastructure of the region and many other factors, and may be a useful supplemental index in hygienic research.

The Strasbourg Large Refractor and Dome: Significant Improvements and Failed Attempts

NASA Astrophysics Data System (ADS)

Heck, Andre

2009-01-01

Founded by the German Empire in the late 19th century, Strasbourg Astronomical Observatory featured several novelties from the start. According to Mueller (1978), the separation of observing buildings from the study area and from the astronomers' residence was a revolution in observatory construction. The instruments were, as much as possible, isolated from the vibrations of the buildings themselves. "Gas flames" and water were used to reduce temperature effects. Thus the Large Dome (ca 11m diameter), housing the Large Refractor (ca 49cm, then the largest in Germany) and covered by zinc over wood, could be cooled down by water running from the top. Reports (including by the French who took over the observatory after World War I) are however somehow nonexistent on the effective usage and actual efficiency of such a system (which must have generated locally a significant amount of humidity). The paper will detail these technical attempts as well as the specificities of the instruments installed in that new observatory intended as a showcase of German astronomy.

Solar energy potential of the largest buildings in the United States

NASA Astrophysics Data System (ADS)

Wence, E. R.; Grodsky, S.; Hernandez, R. R.

2017-12-01

Sustainable pathways of land use for energy are necessary to mitigate climate change and limit conversion of finite land resources needed for conservation and food production. Large, commercial buildings (LCBs) are increasing in size and number throughout the United States (US) and may serve as suitable recipient environments for photovoltaic (PV) solar energy infrastructure that may support a low carbon, low land footprint energy transition. In this study, we identified, characterized, and evaluated the technical potential of the largest, commercial building rooftops (i.e., exceeding 110,000 m2) and their associated parking lots in the US for PV solar energy systems using Aurora, a cloud-based solar optimization platform. We also performed a case study of building-specific electricity generation: electricity consumption balance. Further, we quantified the environmental co-benefit of land sparing and associated avoided emissions (t-CO2-eq) conferred under the counterfactual scenario that solar development would otherwise proceed as a ground-mounted, utility-scale PV installation of equal nominal capacity. We identified and mapped 37 LCBs (by rooftop area) across 18 states in the US, spanning from as far north as the state of Minnesota to as far south as Florida. Rooftop footprints range from 427,297 to 113,689 m2 and have a cumulative surface area of 99.8 million ft2. We characterize the LCBs as either: distribution/warehouse, factory, shopping center, or administrative office/facility. Three of the 37 LCBs currently support rooftop PV and the numbers of associated, detached buildings number up to 38. This study elucidates the extent to which LCBs and their respective parking lots can serve as suitable sites for PV solar energy generation. Lastly, this study demonstrates research-based applications of the Aurora energy modeling platform and informs decision-making focused on redirecting energy development towards human-modified landscapes to prioritize land use for biodiversity and agriculture.

[Evaluating the effectiveness of child lead poisoning prevention programs].

PubMed

Ginot, L; Fontaine, A; Cheymol, J; Peyr, C

2003-09-01

A multi annual screening and prevention program against lead poisoning was implemented in a suburb of the Paris area. We attempted to assess the effectiveness of this program based on data available from children screening and follow-up. Indicators of effectiveness included the evolution of blood lead levels at screening and the frequency of secondary increases in blood lead levels. Buildings inclusion dates were used to control for the increasing selection of less exposed children. A total of 3,660 children were screened between 1992 and 2000. We observed a regular decrease in blood lead levels at screening, in the highest blood lead levels obtained for each child and in the proportion of children whose blood lead levels increased after screening: the proportion of children with initial blood lead levels >=15 micro g/dl fell from 17.4% in the 1992-1996 period to 4.1% in the 1997-2000 period. A multivariate analysis taking into account the first year that children were screened in a given building showed that less exposed children were included over time, but found also an additional independent decrease in blood lead levels that can be related to the effectiveness of prevention efforts. A "building by building" analysis of 30 buildings where more than 20 children were located over the whole study period confirmed that the incidence of lead poisoning decreased within most of these buildings. Taking into account buildings'inclusion dates makes it possible to distinguish program effectiveness from the consequences of including less exposed children The effectiveness of preventive actions is associated with several interacting factors, including the participation of families and the active involvement of local technical staff and policy makers. The finding that the decrease in blood lead levels leveled off after 1997 calls for further actions.

Specific features of modern multifunctional high-rise building construction

NASA Astrophysics Data System (ADS)

Manukhina, Lyubov; Samosudova, Natal'ja

2018-03-01

The article analyzes the main reasons for the development of high-rise building construction the most important of which-is a limitation of the urban areas and, consequently, the high price of land reserved for construction. New engineering and compositional solutions for the creation of new types of buildings are considered - complex technical designs of a large number of storeys completely meet the new requirements for safety and comfort. Some peculiarities of designing high-rise buildings and searching for optimal architectural and planning solutions are revealed since, with external architectural simplicity, high-rise buildings have complex structural and technological and space-planning solutions. We consider the specific features of a high-rise housing in various countries around the world, including Russia, such as the layout of the multi-storey residential buildings, depending on the climatic characteristics of the regions, assessment of the geological risk of the construction site, the choice of parameters and functional purpose of the sections of the territory of high-rise construction, location of the town-planning object for substantiating the overall dimensions of the building, assessment of changes aeration and engineering and hydrological conditions of the site. A special place in the article on the problems of improvement of the territory, the device of courtyards, landscaping, the device of playing and sports grounds. The main conclusion in the article is the following problem - when developing high-rise housing construction, the development of high-rise housing, and an increase in the population density in the territory of large cities of Russia, necessary to create a comfortable and safe level of residents living and not a decrease, but an improvement in the quality of the urban environment.

An analysis of land use planning and equity issues surrounding hazardous liquid and natural gas transmission pipelines in North Carolina

NASA Astrophysics Data System (ADS)

Osland, Anna Christine

Hazardous liquid and natural gas transmission pipelines have received limited attention by planning scholars even though local development decisions can have broad consequences if a rupture occurs. In this dissertation, I evaluated the implications of land-use planning for reducing risk to transmission pipeline hazards in North Carolina via three investigations. First, using a survey of planning directors in jurisdictions with transmission pipeline hazards, I investigated the land use planning tools used to mitigate pipeline hazards and the factors associated with tool adoption. Planning scholars have documented the difficulty of inducing planning in hazardous areas, yet there remain gaps in knowledge about the factors associated with tool adoption. Despite the risks associated with pipeline ruptures, I found most localities use few mitigation tools, and the adoption of regulatory and informational tools appear to be influenced by divergent factors. Whereas risk perception, commitment, capacity, and community context were associated with total tool and information tool use, only risk perception and capacity factors were associated with regulatory tool use. Second, using interviews of emergency managers and planning directors, I examined the role of agency collaboration for building mitigation capacity. Scholars have highlighted the potential of technical collaboration, yet less research has investigated how inter-agency collaboration shapes mitigation capacity. I identify three categories of technical collaboration, discuss how collaborative spillovers can occur from one planning area to another, and challenge the notion that all technical collaborations result in equal mitigation outcomes. Third, I evaluated characteristics of the population near pipelines to address equity concerns. Surprisingly, I did not find broad support for differences in exposure of vulnerable populations. Nonetheless, my analyses uncovered statistically significant clusters of vulnerable groups within the hazard area. Interestingly, development closer to pipelines was newer than areas farther away, illustrating the failure of land-use planning to reduce development encroachment. Collectively, these results highlight the potential of land-use planning to keep people and development from encroaching on pipeline hazards. While this study indicates that planners in many areas address pipeline hazards, it also illustrates how changes to local practices can further reduce risks to human health, homeland security, and the environment.

DOE Voluntary Partnership Program with Utilities and Local Governments Supports the Design of New Data Access Solutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shah, Monisha; Burr, Andrew; Schulte, Andrew

2016-08-26

The Better Buildings Energy Data Accelerator (BBEDA) is a unique effort that has supported 22 pairs of local governments and their utility companies to help building owners gain access to their whole-building energy data. Municipal and Utility BBEDA Partners committed to develop streamlined and easy-to-use solutions to provide whole-building energy data, especially for multitenant commercial buildings, by the end of 2015. As a result, building owners would be able to make data-driven decisions about their buildings by utilizing readily available energy consumption data for entire buildings. Traditionally, data access was difficult to implement due to technical barriers and the lackmore » of clear value propositions for the utilities. During the past two years, BBEDA has taken a hands-on approach to overcome these barriers by offering a platform for the partners to discuss their challenges and solutions. Customized support was also provided to Partners building their local strategies. Based on the lessons learned from the partners, BBEDA developed a final toolkit with guiding documents that addressed key barriers and served as a resource for the other cities and utilities attempting to establish whole-building data access, including an exploration of opportunities to apply the whole-building data to various aspects of utility demand-side management (DSM) programs. BBEDA has been a catalyst for market transformation by addressing the upstream (to efficiency implementation) barrier of data access, demonstrated through the success of the BBEDA partners to address policy, engagement, and technical hurdles and arrive at replicable solutions to make data access a standard practice nationwide. As a result of best practices identified by the BBEDA, 18 utilities serving more than 2.6 million commercial customers nationwide will provide whole-building energy data access to building owners by 2017. This historic expansion of data accessibility will increase building energy benchmarking, the first step many building owners take to improve the energy efficiency of their buildings.« less

Integration of the White Sands Complex into a Wide Area Network

NASA Technical Reports Server (NTRS)

Boucher, Phillip Larry; Horan, Sheila, B.

1996-01-01

The NASA White Sands Complex (WSC) satellite communications facility consists of two main ground stations, an auxiliary ground station, a technical support facility, and a power plant building located on White Sands Missile Range. When constructed, terrestrial communication access to these facilities was limited to copper telephone circuits. There was no local or wide area communications network capability. This project incorporated a baseband local area network (LAN) topology at WSC and connected it to NASA's wide area network using the Program Support Communications Network-Internet (PSCN-I). A campus-style LAN is configured in conformance with the International Standards Organization (ISO) Open Systems Interconnect (ISO) model. Ethernet provides the physical and data link layers. Transmission Control Protocol and Internet Protocol (TCP/IP) are used for the network and transport layers. The session, presentation, and application layers employ commercial software packages. Copper-based Ethernet collision domains are constructed in each of the primary facilities and these are interconnected by routers over optical fiber links. The network and each of its collision domains are shown to meet IEEE technical configuration guidelines. The optical fiber links are analyzed for the optical power budget and bandwidth allocation and are found to provide sufficient margin for this application. Personal computers and work stations attached to the LAN communicate with and apply a wide variety of local and remote administrative software tools. The Internet connection provides wide area network (WAN) electronic access to other NASA centers and the world wide web (WWW). The WSC network reduces and simplifies the administrative workload while providing enhanced and advanced inter-communications capabilities among White Sands Complex departments and with other NASA centers.

Effects of Vaporized Decontamination Systems on Selected Building Interior Materials: Vaporized Hydrogen Peroxide

DTIC Science & Technology

2009-01-01

surfaces in buildings following a terrorist attack using CB agents. Vaporized hydrogen peroxide ( VHP ) and Cl02 are decontamination technologies that...decontaminant. The focus of this technical report is the evaluation of the building interior materials and the Steris VHP technology. 15. SUBJECT...TERMS Material Compatibility VHP vaporized hydrogen peroxide 16. SECURITY CLASSIFICATION OF: a. REPORT U b. ABSTRACT U c. THIS PAGE U 17

Preserving Envelope Efficiency in Performance Based Code Compliance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thornton, Brian A.; Sullivan, Greg P.; Rosenberg, Michael I.

2015-06-20

The City of Seattle 2012 Energy Code (Seattle 2014), one of the most progressive in the country, is under revision for its 2015 edition. Additionally, city personnel participate in the development of the next generation of the Washington State Energy Code and the International Energy Code. Seattle has pledged carbon neutrality by 2050 including buildings, transportation and other sectors. The United States Department of Energy (DOE), through Pacific Northwest National Laboratory (PNNL) provided technical assistance to Seattle in order to understand the implications of one potential direction for its code development, limiting trade-offs of long-lived building envelope components less stringentmore » than the prescriptive code envelope requirements by using better-than-code but shorter-lived lighting and heating, ventilation, and air-conditioning (HVAC) components through the total building performance modeled energy compliance path. Weaker building envelopes can permanently limit building energy performance even as lighting and HVAC components are upgraded over time, because retrofitting the envelope is less likely and more expensive. Weaker building envelopes may also increase the required size, cost and complexity of HVAC systems and may adversely affect occupant comfort. This report presents the results of this technical assistance. The use of modeled energy code compliance to trade-off envelope components with shorter-lived building components is not unique to Seattle and the lessons and possible solutions described in this report have implications for other jurisdictions and energy codes.« less

Developing Verification Systems for Building Information Models of Heritage Buildings with Heterogeneous Datasets

NASA Astrophysics Data System (ADS)

Chow, L.; Fai, S.

2017-08-01

The digitization and abstraction of existing buildings into building information models requires the translation of heterogeneous datasets that may include CAD, technical reports, historic texts, archival drawings, terrestrial laser scanning, and photogrammetry into model elements. In this paper, we discuss a project undertaken by the Carleton Immersive Media Studio (CIMS) that explored the synthesis of heterogeneous datasets for the development of a building information model (BIM) for one of Canada's most significant heritage assets - the Centre Block of the Parliament Hill National Historic Site. The scope of the project included the development of an as-found model of the century-old, six-story building in anticipation of specific model uses for an extensive rehabilitation program. The as-found Centre Block model was developed in Revit using primarily point cloud data from terrestrial laser scanning. The data was captured by CIMS in partnership with Heritage Conservation Services (HCS), Public Services and Procurement Canada (PSPC), using a Leica C10 and P40 (exterior and large interior spaces) and a Faro Focus (small to mid-sized interior spaces). Secondary sources such as archival drawings, photographs, and technical reports were referenced in cases where point cloud data was not available. As a result of working with heterogeneous data sets, a verification system was introduced in order to communicate to model users/viewers the source of information for each building element within the model.

STREAMLINED ENVIRONMENTAL LIFE-CYCLE ASSESSMENT: AN APPROACH FOR EVALUATING THE ENVIRONMENTAL PERFORMANCE OF BUILDING MATERIALS

EPA Science Inventory

The report presents the approach that was developed to prepare reports on building materials for the Environmental Resource Guide (ERG), both technical materials reports and applications reports. It also: (1) presents data collection tools that could be used to replicate material...

Building Ecology and Partition Design. Technical Bulletin.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, Baltimore.

This bulletin is intended as a resource for school system facility planners and architects who design schools. Ways in which decision makers can incorporate environmental concerns in the design of school buildings are detailed. Focus is on the design of interior partition systems. Partition systems in schools serve several purposes; they define…

Capacity Building for Rural Development in the United States.

ERIC Educational Resources Information Center

Murray, Michael; Dunn, Larry

1995-01-01

An essential component of community-based rural development is the leadership and problem-solving abilities of local people. The Colorado Rural Revitalization Project--a joint venture of two universities and a state agency--provided educational, consultative, and technical assistance services for a 1-year capacity-building program in 47…

Energy Efficiency: Transportation and Buildings

NASA Astrophysics Data System (ADS)

Lubell, Michael S.; Richter, Burton

2011-11-01

We present a condensed version of the American Physical Society's 2008 analysis of energy efficiency in the transportation and buildings sectors in the United States with updated numbers. In addition to presenting technical findings, we include the report's recommendations for policy makers that we believe are in the best interests of the nation.

Never Too Late: Boosting Reading Scores in Community College

ERIC Educational Resources Information Center

WestEd, 2014

2014-01-01

While community college instructors are experts in their academic or technical fields, most do not have training to help adults build postsecondary literacy skills. Researchers with WestEd's Strategic Literacy Initiative (SLI) sought to change that. Building on SLI's popular and proven Reading Apprenticeship model for middle and high school…

77. View of interior of room 115, building no. 102, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

77. View of interior of room 115, building no. 102, with technical publications and equipment for testing. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

LC Data QUEST: A Technical Architecture for Community Federated Clinical Data Sharing.

PubMed

Stephens, Kari A; Lin, Ching-Ping; Baldwin, Laura-Mae; Echo-Hawk, Abigail; Keppel, Gina A; Buchwald, Dedra; Whitener, Ron J; Korngiebel, Diane M; Berg, Alfred O; Black, Robert A; Tarczy-Hornoch, Peter

2012-01-01

The University of Washington Institute of Translational Health Sciences is engaged in a project, LC Data QUEST, building data sharing capacity in primary care practices serving rural and tribal populations in the Washington, Wyoming, Alaska, Montana, Idaho region to build research infrastructure. We report on the iterative process of developing the technical architecture for semantically aligning electronic health data in primary care settings across our pilot sites and tools that will facilitate linkages between the research and practice communities. Our architecture emphasizes sustainable technical solutions for addressing data extraction, alignment, quality, and metadata management. The architecture provides immediate benefits to participating partners via a clinical decision support tool and data querying functionality to support local quality improvement efforts. The FInDiT tool catalogues type, quantity, and quality of the data that are available across the LC Data QUEST data sharing architecture. These tools facilitate the bi-directional process of translational research.

LC Data QUEST: A Technical Architecture for Community Federated Clinical Data Sharing

PubMed Central

Stephens, Kari A.; Lin, Ching-Ping; Baldwin, Laura-Mae; Echo-Hawk, Abigail; Keppel, Gina A.; Buchwald, Dedra; Whitener, Ron J.; Korngiebel, Diane M.; Berg, Alfred O.; Black, Robert A.; Tarczy-Hornoch, Peter

2012-01-01

The University of Washington Institute of Translational Health Sciences is engaged in a project, LC Data QUEST, building data sharing capacity in primary care practices serving rural and tribal populations in the Washington, Wyoming, Alaska, Montana, Idaho region to build research infrastructure. We report on the iterative process of developing the technical architecture for semantically aligning electronic health data in primary care settings across our pilot sites and tools that will facilitate linkages between the research and practice communities. Our architecture emphasizes sustainable technical solutions for addressing data extraction, alignment, quality, and metadata management. The architecture provides immediate benefits to participating partners via a clinical decision support tool and data querying functionality to support local quality improvement efforts. The FInDiT tool catalogues type, quantity, and quality of the data that are available across the LC Data QUEST data sharing architecture. These tools facilitate the bi-directional process of translational research. PMID:22779052

Generating tsunami risk knowledge at community level as a base for planning and implementation of risk reduction strategies

NASA Astrophysics Data System (ADS)

Wegscheider, Stephanie; Post, Joachim; Mück, Matthias; Zosseder, Kai; Muhari, Abdul; Anwar, Herryal Z.; Gebert, Niklas; Strunz, Günter; Riedlinger, Torsten

2010-05-01

More than 4 million Indonesians live in tsunami-prone areas on the southern and western coasts of Sumatra, Java and Bali. Depending on the location of the tsunamigenic earthquake, in many cases the time to reach a tsunami-safe area is as short as 15 or 20 minutes. To increase the chances of a successful evacuation a comprehensive and thorough planning and preparation is necessary. For this purpose, detailed knowledge on potential hazard impact and safe areas, exposed elements such as people, critical facilities and lifelines, deficiencies in response capabilities and evacuation routes is crucial. The major aims of this paper are (i) to assess and quantify people's response capabilities and (ii) to identify high risk areas which have a high need of action to improve the response capabilities and thus to reduce the risk. The major factor influencing people's ability to evacuate successfully is the factor time. The estimated time of arrival of a tsunami at the coast which determines the overall available time for evacuation after triggering of a tsunami can be derived by analyzing modeled tsunami scenarios for a respective area. But in most cases, this available time frame is diminished by other time components including the time until natural or technical warning signs are received and the time until reaction follows a warning (understanding a warning and decision to take appropriate action). For the time to receive a warning we assume that the early warning centre is able to fulfil the Indonesian presidential decree to issue a warning within 5 minutes. Reaction time is difficult to quantify as here human intrinsic factors as educational level, believe, tsunami knowledge and experience play a role. Although we are aware of the great importance of this factor and the importance to minimize the reaction time, it is not considered in this paper. Quantifying the needed evacuation time is based on a GIS approach. This approach is relatively simple and enables local authorities to implement it at low technical complexity and relatively low cost and time needs. Basic principle is to define the best evacuation route from a given point to the nearest safe area. Here the fastest path from that point to the shelter location has to be found. Thereby the impact of land cover, slope, population density, population age and gender distribution are taken into account as literature studies prove these factors as highly important. Knowing the fastest path and the distance to the nearest safe area together with a spatially distributed pattern of evacuation speed delivers the time needed from each location to a shelter. A shelter location can either be a horizontal area or an evacuation building (vertical evacuation). For both kinds of evacuation target points, one limiting factor can be again time: are the people able to reach the target point within the available time? Especially for evacuation buildings, there is a second possibly limiting factor, namely capacity. In the majority of cases in all of the three study areas where this approach was applied to, capacity was the critical factor instead of time. Consequently, for planning purposes it is essential to know which area can be served by an evacuation building and which areas have to be assigned to a different evacuation target point due to exhausted capacity of the nearest one. The coverage of a building is also derived on basis of a GIS approach using the beforehand derived available and needed evacuation times and detailed population distribution data. Evacuation time and derived evacuable areas are then used to identify high risk areas. In combination with detailed population distribution data, hazard probability and hazard intensity, it is possible to identify areas with high risk and large deficiencies in response capabilities. Often enough, human response capabilities can be increased by thorough disaster planning and thus, the results of this paper provide valuable information for planning authorities to decrease the risk. This paper presents results exemplarily for the study area Kuta, Bali where we tested this approach and where it is also in progress to be implemented by local authorities.

10 CFR 455.122 - Applicant certifications for State grants for technical assistance, program assistance, and...

Code of Federal Regulations, 2010 CFR

2010-01-01

... sources, energy conservation measures for eligible buildings consistent with this part; (b) Will not... 10 Energy 3 2010-01-01 2010-01-01 false Applicant certifications for State grants for technical assistance, program assistance, and marketing. 455.122 Section 455.122 Energy DEPARTMENT OF ENERGY ENERGY...

Cobra Strikes! High-Performance Car Inspires Students, Markets Program

ERIC Educational Resources Information Center

Jenkins, Bonita

2008-01-01

Nestled in the Lower Piedmont region of upstate South Carolina, Piedmont Technical College (PTC) is one of 16 technical colleges in the state. Automotive technology is one of its most popular programs. The program features an instructive, motivating activity that the author describes in this article: building a high-performance car. The Cobra…

Building Turnaround Capacity for Urban School Improvement: The Role of Adaptive Leadership and Defined Autonomy

ERIC Educational Resources Information Center

Conrad, Jill K.

2013-01-01

This dissertation examines the levels of and relationships between technical leadership, adaptive leadership, and defined autonomy among Denver school leaders along with their combined effects on school growth gains over time. Thirty principals provided complete responses to an online survey that included existing scales for technical leadership,…

In Fibrous Fields. Technics: Carpet for Architecture

ERIC Educational Resources Information Center

Yee, Roger

1974-01-01

Carpet is an ageless youth. Civilization has written its history on carpet. The architect specifying carpet for a wide range of applications soon learns it is technically as advanced as the buildings it graces. Tells story of art and craft of carpet manufacture from obscure origins in the Orient to modern manufacturing methods. (Author/EA)

Metric Conversion in the Construction Industries--Technical Issues and Status.

ERIC Educational Resources Information Center

Milton, Hans J.; Berry, Sandra A.

This Special Publication was prepared at the request of the Metric Symposium Planning Committee of the National Institute of Building Sciences (NIBS). It is intended to provide information on technical issues and status of metric conversion in the United States construction industries. It was made available to attendees at the NIBS Symposium on…

A Formal Theory of Perception. Technical Report No. 161.

ERIC Educational Resources Information Center

Rottmayer, William Arthur

An attempt to build a mathematical model of a device that could learn geometry is discussed. The report discusses the background and motivation of the study, the coding problem, the derivation of Suppes "Stimulus-Response Theory of Finite Automata" used in the work in learning theory, and a summary of the technical work. (DB)

Building Interest in Math and Science for Rural and Underserved Elementary School Children Using Robots

ERIC Educational Resources Information Center

Matson, Eric; DeLoach, Scott; Pauly, Robyn

2004-01-01

The "Robot Roadshow Program" is designed to increase the interest of elementary school children in technical disciplines, specifically math and science. The program focuses on children from schools categorized as rural or underserved, which often have limited access to advanced technical resources. We developed the program using robots…

An Object-Oriented Architecture for Intelligent Tutoring Systems. Technical Report No. LSP-3.

ERIC Educational Resources Information Center

Bonar, Jeffrey; And Others

This technical report describes a generic architecture for building intelligent tutoring systems which is developed around objects that represent the knowledge elements to be taught by the tutor. Each of these knowledge elements, called "bites," inherits both a knowledge organization describing the kind of knowledge represented and…

Applied Baccalaureate Degrees: Policy and Outcomes Evaluation. Research Report 15-2

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2015

2015-01-01

Washington's community and technical colleges (CTCs) play an important role in producing baccalaureate degree graduates in the state. They expand opportunities for both graduates and employers, build upon professional-technical associate degrees, and provide a clear pathway for students who may be place bound or have difficulty finding a transfer…

The Correlates of Tracking Policy: Opportunity Hoarding, Status Competition, or a Technical-Functional Explanation?

ERIC Educational Resources Information Center

Kelly, Sean; Price, Heather

2011-01-01

In this analysis, the authors explore the relationship between the social context of high schools and school-to-school variation in tracking policies. The authors consider three explanations for the implementation of highly elaborated tracking systems: opportunity hoarding, status competition, and a technical-functional explanation. Building on…

Connected Vehicle Pilot Deployment Program phase 1 : comprehensive deployment plan : New York City : volume 1 : technical application : part I : technical and management approach.

DOT National Transportation Integrated Search

2016-08-01

This document describes the Deployment Plan for the New York City Department of Transportation (NYC) Connected Vehicle Pilot Deployment (CVPD) Project. This plan describes the approach to complete Phase 2 Design/Build/Test, and Phase 3 Operate and Ma...

Building a Foundational Model for Credit for Prior Learning. Strategies for Transformative Change

ERIC Educational Resources Information Center

Kamps, A.; Loritz, T.; Schaff, E.; Richie, D.

2016-01-01

"Making the Future: The Wisconsin Strategy," under the leadership of Northeast Wisconsin Technical College (NWTC), received a Round Two U.S. Department of Labor Trade Adjustment Assistance for Community College and Career Training (TAACCCT) grant. The consortium brought together all 16 colleges in the Wisconsin Technical College System…

77 FR 53903 - Notice of Proposed Information Collection for Public Comment: OneCPD Technical Assistance and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

... Information Collection for Public Comment: OneCPD Technical Assistance and Capacity Building Needs Assessment... Needs Assessment. Description of the need for the information proposed: The OneCPD Needs Assessment will... to identify trends in TA needs across grantees and assist in prioritizing the development of tools...

Teaching Technology with Technology. An Off-the-Shelf Robotics Course Builds Technical Center Enrollment.

ERIC Educational Resources Information Center

Hannemann, Jim; Rice, Thomas R.

1991-01-01

At the Oakland Technical Center, which provides vocational programs for nine Michigan high schools, a one-semester course in Foundations of Technology Systems uses a computer-simulated manufacturing environment to teach applied math, science, language arts, communication skills, problem solving, and teamwork in the context of technology education.…

Wege zur Festigung der Fachlexik (Ways of Building a Technical Vocabulary)

ERIC Educational Resources Information Center

Kalmykowa, Elena

1974-01-01

Learning to read foreign technical texts requires (a) a minimum vocabulary and (b) effective drill. The following are suggested: translation, question-answer method, definition exercises, exercises to develop skill in the use of reference works, schematic presentations and tables, annotating and making reports and summaries. (Text is in German.)…

Using Isocrates to Teach Technical Communication and Civic Engagement

ERIC Educational Resources Information Center

Brizee, Allen

2015-01-01

Building on work by Dubinsky, Haskins, and Simmons and Grabill, this article explains how a technical communication instructor used Isocrates and informal usability testing to help guide a service-learning project involving the One Laptop Per Child XO-1 notebook. For the project, engineering students received feedback from peers and elementary…

NET-ZERO ENERGY BUILDING OPERATOR TRAINING PROGRAM (NZEBOT)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brizendine, Anthony; Byars, Nan; Sleiti, Ahmad

2012-12-31

The primary objective of the Net-Zero Energy Building Operator Training Program (NZEBOT) was to develop certificate level training programs for commercial building owners, managers and operators, principally in the areas of energy / sustainability management. The expected outcome of the project was a multi-faceted mechanism for developing the skill-based competency of building operators, owners, architects/engineers, construction professionals, tenants, brokers and other interested groups in energy efficient building technologies and best practices. The training program draws heavily on DOE supported and developed materials available in the existing literature, as well as existing, modified, and newly developed curricula from the Department ofmore » Engineering Technology & Construction Management (ETCM) at the University of North Carolina at Charlotte (UNC-Charlotte). The project goal is to develop a certificate level training curriculum for commercial energy and sustainability managers and building operators that: 1) Increases the skill-based competency of building professionals in energy efficient building technologies and best practices, and 2) Increases the workforce pool of expertise in energy management and conservation techniques. The curriculum developed in this project can subsequently be used to establish a sustainable energy training program that can contribute to the creation of new “green” job opportunities in North Carolina and throughout the Southeast region, and workforce training that leads to overall reductions in commercial building energy consumption. Three energy training / education programs were developed to achieve the stated goal, namely: 1. Building Energy/Sustainability Management (BESM) Certificate Program for Building Managers and Operators (40 hours); 2. Energy Efficient Building Technologies (EEBT) Certificate Program (16 hours); and 3. Energy Efficent Buildings (EEB) Seminar (4 hours). Training Program 1 incorporates the following topics in the primary five-day Building Energy/Sustainability Management Certificate program in five training modules, namely: 1) Strategic Planning, 2) Sustainability Audits, 3) Information Analysis, 4) Energy Efficiency, and 5) Communication. Training Program 2 addresses the following technical topics in the two-day Building Technologies workshop: 1) Energy Efficient Building Materials, 2) Green Roofing Systems, 3) Energy Efficient Lighting Systems, 4) Alternative Power Systems for Buildings, 5) Innovative Building Systems, and 6) Application of Building Performance Simulation Software. Program 3 is a seminar which provides an overview of elements of programs 1 and 2 in a seminar style presentation designed for the general public to raise overall public awareness of energy and sustainability topics.« less

Building an intellectual infrastructure for space commerce

NASA Technical Reports Server (NTRS)

Stone, Barbara A.; Struthers, Jeffrey L.

1992-01-01

Competition in commerce requires an 'intellectual infrastructure', that is, a work force with extensive scientific and technical knowledge and a thorough understanding of the business world. This paper focuses on the development of such intellectual infrastructure for space commerce. Special consideration is given to the contributions to this development by the 17 Centers for the Commercial Development of Space Program conducting commercially oriented research in eight specialized areas: automation and robotics, remote sensing, life sciences, materials processing in space, space power, space propulsion, space structures and materials, and advanced satellite communications. Attention is also given to the Space Business Development Center concept aimed at addressing a variety of barriers common to the development of space commerce.

Cultural resources regulatory analysis, area overview, and assessment of previous Department of Energy and Kirtland Air Force Base inventories for Sandia National Laboratories, New Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoagland, S.R.; Lord, K.J.

The following regulatory analysis and literature review of archaeological and historic resources on the Sandia National Laboratory/New Mexico (SNL/NM) occupied properties was prepared by the Chambers Group Inc. in January 1992. Based upon compliance surveys of Technical Area I through V undertaken in 1990 and 1991 the report concludes that, although consultation with the Department of Energy and State Historic Preservation Officer will still be required for particular projects, cultural resources should not affect the overall planning and development of future SNL/NM projects. As SNL/NM buildings approach 50 years in age additional analysis and consultations may be required. In ordermore » to protect sensitive resources, the location coordinates and maps provided in the original report are not included here.« less

Towards the bibliography of life

PubMed Central

King, David; Morse, David R.; Willis, Alistair; Dil, Anton

2011-01-01

Abstract This paper discusses how we intend to take forward the vision of a Bibliography of Life in the ViBRANT project. The underlying principle of the Bibliography is to provide taxonomists and others with a freely accessible bibliography covering the whole of life. Such a bibliography has been achieved for specific study areas within taxonomy, but not for “life” as a whole. The creation of such a comprehensive tool has been hindered by various social and technical issues. The social concerns focus on the willingness of users to contribute to the Bibliography. The technical concerns relate to the architecture required to deliver the Bibliography. These issues are discussed in the paper and approaches to addressing them within the ViBRANT project are described, to demonstrate how we can now seriously consider building a Bibliography of Life. We are particularly interested in the potential of the resulting tool to improve the quality of bibliographic references. Through analysing the large number of references in the Bibliography we will be able to add metadata by resolving known issues such as geographical name variations. This should result in a tool that will assist taxonomists in two ways. Firstly, it will be easier for them to discover relevant literature, especially pre-digital literature; and secondly, it will be easier for them to identify the canonical form for a citation The paper also covers related issues relevant to building the tool in ViBRANT, including implementation and copyright, with suggestions as to how we could address them. PMID:22207811

[Evaluation of residual osteomuscular function using computerised movement analysis for building sector workers: specificity and technical problem].

PubMed

D'Orso, M I; Centemeri, R; Latocca, R; Riva, M; Cesana, G

2012-01-01

Occupational Health Doctors active in building sector firms frequently have to evaluate residual workers' osteomuscular function in patients coming back to work after an accident happened during work time or free time. Definition of their specific individual work suitability is usually carried out utilizing semeiotic tests in which subjective evaluation of every single Medical Doctor is real important in definition of final results and this fact can cause legal controversies. In our research we describe the application of computerised movement analysis on 10 workers of building sector. In every patient examined this technical method has been able to study objectively the tridimensional ranges of motion of most important osteomuscular districts. The possibility to have an objective evaluation of residual osteomuscular function has a relevant importance both in definition of workers' work suitability at the moment in which they start again their activities and in possible future legal conflicts.

Global Disease Detection-Achievements in Applied Public Health Research, Capacity Building, and Public Health Diplomacy, 2001-2016.

PubMed

Rao, Carol Y; Goryoka, Grace W; Henao, Olga L; Clarke, Kevin R; Salyer, Stephanie J; Montgomery, Joel M

2017-11-01

The Centers for Disease Control and Prevention has established 10 Global Disease Detection (GDD) Program regional centers around the world that serve as centers of excellence for public health research on emerging and reemerging infectious diseases. The core activities of the GDD Program focus on applied public health research, surveillance, laboratory, public health informatics, and technical capacity building. During 2015-2016, program staff conducted 205 discrete projects on a range of topics, including acute respiratory illnesses, health systems strengthening, infectious diseases at the human-animal interface, and emerging infectious diseases. Projects incorporated multiple core activities, with technical capacity building being most prevalent. Collaborating with host countries to implement such projects promotes public health diplomacy. The GDD Program continues to work with countries to strengthen core capacities so that emerging diseases can be detected and stopped faster and closer to the source, thereby enhancing global health security.

Miscellaneous and Electronic Loads Energy Efficiency Opportunities for Commercial Buildings: A Collaborative Study by the United States and India

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ghatikar, Girish; Cheung, Iris; Lanzisera, Steven

This report documents the technical evaluation of a collaborative research, development, and demonstration (RD&D) project that aims to address energy efficiency of Miscellaneous and Electronic Loads (MELs) (referred to as plug loads interchangeably in this report) using load monitoring and control devices. The goal s of this project are to identify and provide energy efficiency and building technologies to exemplary information technology (IT) office buildings, and to assist in transforming markets via technical assistance and engagement of Indian and U.S. stakeholders. This report describes the results of technology evaluation and United States – India collaboration between the Lawrence Berkeley Nationalmore » Laboratory (LBNL), Infosys Technologies Limited (India), and Smartenit, Inc. (U.S.) to address plug - load efficiency. The conclusions and recommendations focus on the larger benefits of such technologies and their impacts on both U.S. and Indian stakeholders.« less

Environmental legislation as the legal framework for mitigating natural hazards in Spain

NASA Astrophysics Data System (ADS)

Garrido, Jesús; Arana, Estanislao; Jiménez Soto, Ignacio; Delgado, José

2015-04-01

In Spain, the socioeconomic losses due to natural hazards (floods, earthquakes or landslides) are considerable, and the indirect costs associated with them are rarely considered because they are very difficult to evaluate. The prevention of losses due to natural hazards is more economic and efficient through legislation and spatial planning rather than through structural measures, such as walls, anchorages or structural reinforcements. However, there isn't a Spanish natural hazards law and national and regional sector legislation make only sparse mention of them. After 1978, when the Spanish Constitution was enacted, the Autonomous Communities (Spanish regions) were able to legislate according to the different competences (urban planning, environment or civil protection), which were established in the Constitution. In the 1990's, the Civil Protection legislation (national law and regional civil protection tools) dealt specifically with natural hazards (floods, earthquakes and volcanoes), but this was before any soil, seismic or hydrological studies were recommended in the national sector legislation. On the other hand, some Autonomous Communities referred to natural hazards in the Environmental Impact Assessment legislation (EIA) and also in the spatial and urban planning legislation and tools. The National Land Act, enacted in 1998, established, for the first time, that those lands exposed to natural hazards should be classified as non-developable. The Spanish recast text of the Land Act, enacted by Royal Legislative Decree 2/2008, requires that a natural hazards map be included in the Environmental Sustainability Report (ESR), which is compulsory for all master plans, according to the provisions set out by Act 9/2006, known as Spanish Strategic Environmental Assessment (SEA). Consequently, the environmental legislation, after the aforementioned transposition of the SEA European Directive 2001/42/EC, is the legal framework to prevent losses due to natural hazards through land use planning. However, most of the Spanish master plans approved after 2008 don't include a natural hazards map or/and don't classify the areas exposed to natural hazards as non-developable. Restrictions or prohibitions for building in natural hazard-prone areas are not usually established in the master plans. According to the jurisprudence, the environmental legislation prevails over spatial and urban planning regulations. On the other hand, the precedence of the national competence in public security would allow reclassification or the land, independently of the political or economic motivations of the municipal government. Despite of the technical building code or the seismic building code where some recommendations for avoiding "geotechnical" or seismic hazards are established, there are not compulsory guidelines to do technical studies/hazard maps for floods or landslides. The current legislation should be improved, under a technical point of view, and some mechanisms for enforcing the law should be also considered.

[Change management: An analysis of actors; perceptions about technical assistance in the Democratic Republic of Congo].

PubMed

Ribesse, Nathalie; Iyeti, Alain; Macq, Jean

2015-01-01

Technical assistance (TA) is a common component of health system strengthening interventions. This type of intervention is too often designed and evaluated according to a logic that fails to take into account social complexity. Actors' perceptions are one element of this complexity. This article presents a study conducted in the Democratic Republic of Congo designed to identify perceptions concerning two types of technical support providers for health system strengthening: long-term technical assistants (agents of development agencies) and provincial technical advisors (agents of the Ministry of Health). Interviews were conducted with an innovative tool inspired by the principles of systems thinking. Interviewees were actors involved in a TA intervention in the province of Bandundu. Their expectations regarding TA providers were identified in terms of personal characteristics (knowledge, know-how and interpersonal skills), roles, and styles of interaction for capacity building ("interventionist/ prescriptive axes"). Interviewees emphasized the importance of mutual learning and the quality of interactions, which depends on TA provider's interpersonal skills and mutual willingness. Perceptions of TA provider's characteristics tend to be similar, but several differences were observed concerning the expectations about the roles of TAs, and the style that should be adopted for capacity building. Ignoring these differences in expectations may be a threat to the effectiveness of TA.

Improving integration and coordination of funding, technical assistance, and reporting/data collection: recommendations from CDC and USAPI stakeholders.

PubMed

Ka'opua, Lana Sue I; White, Susan F; Rochester, Phyllis F; Holden, Debra J

2010-09-01

Current US Federal funding mechanisms may foster program silos that disable sharing of resources and information across programs within a larger system of public health services. Such silos present challenges to USAPI communities where human resources, health infrastructure, and health financing are limited. Integrative and coordinated approaches have been recommended. The CDC Pacific Islands Integration and Coordination project was initiated by the Division of Cancer Prevention and Control (DCPC). Its project aim was to identify ways for the CDC to collaborate with the USAPI in improving CDC activities and processes related to chronic disease. This article focuses on recommendations for improving coordination and integration in three core areas of health services programming: funding, program reporting/data collection and analysis, and technical assistance. Preliminary information on challenges and issues relevant to the core areas was gathered through site visits, focus groups, key informant interviews, and other sources. This information was used by stakeholder groups from the CDC and the USAPI to develop recommendations in the core programming areas. Recommendations generated at the CDC and USAPI stakeholder meetings were prepared into a single set of recommendations and stakeholders reviewed the document for accuracy prior to its dissemination to CDC's National Center for Chronic Disease Prevention and Health Promotion programs management and staff. Key recommendations, include: (1) consideration of resource s and other challenges unique to the USAPI when reviewing funding applications, (2) consideration of ways to increase flexibility in USAPI use of program funds, (3) dedicate funding and human resources for technical assistance, (4) provide opportunities for capacity-building across programs and jurisdictions, (5) consider ways to more directly link program reporting with technical assistance. This project provided a unique opportunity for CDC and USAPI stakeholders to share diverse perspectives on challenges to public health programs in the USAPI. Despite diverse experiences, the final set of recommendations reflected a high level of concordance between USAPI and CDC stakeholders on ways to improve coordination and integration of CDC processes and activities in the three core areas. Recommendations have informed some actions already initiated by the DCPC, including the dedication of funds for leadership institutes aimed at enhancing USAPI capacity for sustainable, integrated regional and jurisdictional cancer control infrastructure. Such efforts are an important beginning, but more remains to be done. Indicated is the need for continuous dialogue and collaboration. While this project focused on the USAPI, our results may be relevant to those interested in inter-organizational collaborations, medically underserved areas, public health services programs, and community-based participatory approaches.

Integrated rural development programs: a skeptical perspective.

PubMed

Ruttan, V W

1975-11-01

In examining integrated rural development programs the question that arises is why is it possible to identify several relatively successful small-scale or pilot rural development projects yet so difficult to find examples of successful rural development programs. 3 bodies of literature offer some insight into the morphology of rural development projects, programs, and processes: the urban-industrial impact hypothesis; the theory of induced technical change; and the new models of institutional change that deal with institution building and the economics of bureaucratic behavior. The urban-industrial impact hypothesis helps in the clarification of the relationships between the development of rural areas and the development of the total society of which rural areas are a part. It is useful in understanding the spatial dimensions of rural development where rural development efforts are likely to be most successful. Formulation of the hypothesis generated a series of empirical studies designed to test its validity. The effect of these studies has been the development of a rural development model in which the rural community is linked to the urban-industrial economy through a series of market relationships. Both the urban economy's rate of growth and the efficiency of the intersector product and factor markets place significant constraints on the possibilities of rural area development. It is not possible to isolate development processes in the contemporary rural community in a developing society from development processes in the larger society. The induced technical change theory provides a guide as to what must be done to gain access to efficient sources of economic growth, the new resources and incomes that are necessary to sustain rural development. Design of a successful rural development strategy involves a combination of technical and institutional change. The ability of rural areas to respond to the opportunities for economic growth generated by local urban-industrial development, or by the expansion of national and international markets, depends on the capacity for adaptive responses on the part of cultural, political, and economic institutions as well as on technical innovations which can generate substantial new income flows in response to the new economic opportunities. Improvements in the welfare of the rural population in poor regions will call for institutional innovations which effectively link urban and rural areas through a series of nonmarket and market relationships. A major implication of the models is that given the "markets" in which they operate, bureaucracies will be successful in capturing a relatively large share of the economic gains generated by their activities.

2. AERIAL VIEW OF SLC3 FROM THE NORTH. SLC3W IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. AERIAL VIEW OF SLC-3 FROM THE NORTH. SLC-3W IN FOREGROUND; SLC-3E IN BACKGROUND. LAUNCH OPERATIONS BUILDING (LOB; BLDG. 763) AND CABLE TRAYS BETWEEN LOB AND THE PADS VISIBLE IMMEDIATELY EAST (LEFT) OF THE PADS. VEHICLE SUPPORT BUILDING (BLDG. 766) LOCATED EAST OF ROAD IN LEFT FOREGROUND. TECHNICAL SUPPORT BUILDING (BLDG. 762/762A) AND SLC-3 AIR FORCE BUILDING (BLDG. 761) VISIBLE EAST OF LOG IN LEFT BACKGROUND. - Vandenberg Air Force Base, Space Launch Complex 3, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

Toward a virtual building laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klems, J.H.; Finlayson, E.U.; Olsen, T.H.

1999-03-01

In order to achieve in a timely manner the large energy and dollar savings technically possible through improvements in building energy efficiency, it will be necessary to solve the problem of design failure risk. The most economical method of doing this would be to learn to calculate building performance with sufficient detail, accuracy and reliability to avoid design failure. Existing building simulation models (BSM) are a large step in this direction, but are still not capable of this level of modeling. Developments in computational fluid dynamics (CFD) techniques now allow one to construct a road map from present BSM's tomore » a complete building physical model. The most useful first step is a building interior model (BIM) that would allow prediction of local conditions affecting occupant health and comfort. To provide reliable prediction a BIM must incorporate the correct physical boundary conditions on a building interior. Doing so raises a number of specific technical problems and research questions. The solution of these within a context useful for building research and design is not likely to result from other research on CFD, which is directed toward the solution of different types of problems. A six-step plan for incorporating the correct boundary conditions within the context of the model problem of a large atrium has been outlined. A promising strategy for constructing a BIM is the overset grid technique for representing a building space in a CFD calculation. This technique promises to adapt well to building design and allows a step-by-step approach. A state-of-the-art CFD computer code using this technique has been adapted to the problem and can form the departure point for this research.« less

Working Papers in Dialogue Modeling, Volume 2.

ERIC Educational Resources Information Center

Mann, William C.; And Others

The technical working papers that comprise the two volumes of this document are related to the problem of creating a valid process model of human communication in dialogue. In Volume 2, the first paper concerns study methodology, and raises such issues as the choice between system-building and process-building, and the advantages of studying cases…

1. GENERAL VIEW OF WEST FACE OF ENTRY CONTROL POINT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. GENERAL VIEW OF WEST FACE OF ENTRY CONTROL POINT (BLDG. 768) SHOWING RELATIVE POSITION TO TECHNICAL SUPPORT BUILDING (BLDG. 762/762A) AND SLC-3 AIR FORCE BUILDING (BLDG. 761) - Vandenberg Air Force Base, Space Launch Complex 3, Entry Control Point, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

Building Trades II.

ERIC Educational Resources Information Center

Hamlin, Larry

This packet contains a curriculum guide, a set of lesson plans, a student manual, and a competency test packet for the Building Trades II course, the second year of a 2-year, 2-unit (350 hour) preemployment program for students in grades 11-12. This technical course is designed to develop the basic skills associated with builders. An additional…

Information Manual: Procedures, Planning Concepts, Subsystems. ABS Publication No. 3.

ERIC Educational Resources Information Center

California Univ., Berkeley.

This report, the third in a series which presents the results of a systems analysis of the problem of providing science and engineering buildings at the university level, is a technical manual for using the Academic Building Systems (ABS) approach in programing, designing, and constructing such facilities. The document presents (1) planning…

Learning by Doing: Teaching Decision Making through Building a Code of Ethics.

ERIC Educational Resources Information Center

Hawthorne, Mark D.

2001-01-01

Notes that applying abstract ethical principles to the practical business of building a code of applied ethics for a technical communication department teaches students that they share certain unarticulated or unconscious values that they can translate into ethical principles. Suggests that combining abstract theory with practical policy writing…

Council on Tall Buildings and Urban Habitat

Science.gov Websites

Publications CTBUH Journal Awards Books Technical Guides Research Reports Other Books IJHRB Research Journal TBUH Chinese Journal Virtual Research Journal Conference Publications Posters Awards Global Awards Council on Tall Buildings and Urban Habitat About CTBUH Organization & People Membership

77 FR 74862 - OneCPD Technical Assistance and Capacity Building Needs Assessment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-18

... the Office of Management and Budget (OMB) for review, as required by the Paperwork Reduction Act. The... programs funded by CPD and enable HUD and the TA provider to better understand the scope of assistance... Desk Officer, Office of Management and Budget, New Executive Office Building, Washington, DC 20503; fax...

82. View of specialized maintenance shop in transmitter building no. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

82. View of specialized maintenance shop in transmitter building no. 101, showing technical publications library and equipment logging trays. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

An Outcome Evaluation of the Spirituality for Kids Program. Technical Report

ERIC Educational Resources Information Center

Maestas, Nicole; Gaillot, Sarah

2008-01-01

This report presents results from a multisite, quantitative evaluation of the international Spirituality for Kids (SFK) after-school program. Despite its name, SFK is a nonreligious program that seeks to build resilience in children by teaching them to access inner resources and build positive connections with others. The SFK program is unlike…

Solar Heating and Cooling of Buildings: Phase 0. Executive Summary. Final Report.

ERIC Educational Resources Information Center

Westinghouse Electric Corp., Baltimore, MD.

After the Westinghouse Electric Corporation made a comprehensive analysis of the technical, economic, social, environmental, and institutional factors affecting the feasibility of utilizing solar energy for heating and cooling buildings, it determined that solar heating and cooling systems can become competitive in most regions of the country in…

"I Myself Want to Build": Women, Architectural Education and the Integration of Germany's Technical Colleges

ERIC Educational Resources Information Center

Stratigakos, Despina

2007-01-01

This article reconstructs women's entry into the architecture classrooms of Germany's "Technische Hochschulen," which were, and remain, the nation's primary institutions for training architects. Created in the 1860s and '70s to supply an industrializing nation with well-educated engineers and building officials, these elite colleges…

Learning from the Parallel Pathways of Makers to Broaden Pathways to Engineering

ERIC Educational Resources Information Center

Foster, Christina; Wigner, Aubrey; Lande, Micah; Jordan, Shawn S.

2018-01-01

Background: Makers are a growing community of STEM-minded people who bridge technical and non-technical backgrounds to imagine, build and fabricate engineering systems. Some have engineering training, some do not. This paper presents a study to explore the educational pathways of adult Makers and how they intersect with engineering. This research…

56. Photocopy of Mechanical drawing, dated August 6, 1976 by ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

56. Photocopy of Mechanical drawing, dated August 6, 1976 by Raytheon Company. Original drawing property of United States Air Force, 21" Space Command. H-12 - PAVE PAWS TECHNICAL FACILITY - OTIS AFB - EQUIPMENT ROOM PLANS. DRAWING NO. AW35-46-06 - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

53. Photocopy of Structural drawing, dated August 6, 1976 by ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

53. Photocopy of Structural drawing, dated August 6, 1976 by Raytheon Company. Original drawing property of United States Air Force, 21" Space Command. S-4 - PAVE PAWS TECHNICAL FACILITY - OTIS AFB - FIRST FLOOR PLAN. DRAWING NO. AW35-46-06 - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

54. Photocopy of Structural drawing, dated August 6, 1976 by ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

54. Photocopy of Structural drawing, dated August 6, 1976 by Raytheon Company. Original drawing property of United States Air Force, 21" Space Command. S-14 - PAVE PAWS TECHNICAL FACILITY - OTIS AFB - ARRAY DETAILS. DRAWING NO. AW35-46-06 - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Technical Assistance as a Prevention Capacity-Building Tool: A Demonstration Using the Getting to Outcomes[R] Framework

ERIC Educational Resources Information Center

Hunter, Sarah B.; Chinman, Matthew; Ebener, Patricia; Imm, Pam; Wandersman, Abraham; Ryan, Gery W.

2009-01-01

Demands on community-based prevention programs for performance accountability and positive outcomes are ever increasing in the face of constrained resources. Relatively little is known about how technical assistance (TA) should be structured to benefit community-based organizations and to lead to better outcomes. In this study, data from multiple…

Interim Joint Technical Assessment Report: Light-Duty Vehicle Greenhouse Gas Emission Standards and Corporate Average Fuel Economy Standards for Model Years 2017-2025

EPA Pesticide Factsheets

EPA and the NHTSA collaborated with CARB on this joint Technical Assessment Report to build on the success of the first phase of the National Program to regulate fuel economy and greenhouse gas (GHG) emissions from U.S. light-duty vehicles.

Rooftop Solar Technical Potential for Low-to-Moderate Income Households in

Science.gov Websites

communities. A map of the United States, divided by county, is color-coded by the total solar technical of LMI households in the U.S. (approximately 43 percent), this analysis reveals two other important city governments, though to do so requires deployment on multi-family and renter-occupied buildings

MDRC's Career and Technical Education Projects. Issue Focus

ERIC Educational Resources Information Center

MDRC, 2017

2017-01-01

The past decade has seen a resurgence of interest in career and technical education (CTE) as a way to engage students, help people build the skills necessary to succeed in a technologically advanced economy, and meet employer demand for workers. MDRC--which has a two-decade history of developing and evaluating CTE programs, including their…

Building Coalitions To Provide HIV Legal Advocacy Services: Utilizing Existing Disability Models. AIDS Technical Report, No. 5.

ERIC Educational Resources Information Center

Harvey, David C.; Ardinger, Robert S.

This technical report is part of a series on AIDS/HIV (Acquired Immune Deficiency Syndrome/Human Immunodeficiency Virus) and is intended to help link various legal advocacy organizations providing services to persons with mental illness or developmental disabilities. This report discusses strategies to utilize existing disability models for…

Development of the Damage Potential resulting from Avalanche Risks, Case Study Galtür (Tyrol, Austria)

NASA Astrophysics Data System (ADS)

Keiler, M.

2003-04-01

Reports on catastrophes with high damage caused by natural hazards seem to have increased in number recently. A new trend in dealing with these natural processes leads to the integration of risk into natural hazards evaluations and approaches of integral risk management. The risk resulting from natural hazards can be derived from the combination of parameters of physical processes (intensity and recurrence probability) and damage potential (probability of presence and expected damage value). Natural hazard research focuses mainly on the examination, modelling and estimation of individual geomorphological processes as well as on future developments caused by climate change. Even though damage potential has been taken into account more frequently, quantifying statements are still missing. Due to the changes of the socio-economic structures in mountain regions (urban sprawl, population growth, increased mobility and tourism) these studies are mandatory. This study presents a conceptual method that records the damage potential (probability of physical presence, evaluation of buildings) and shows the development of the damage potential resulting from avalanches since 1950. The study area is the community of Galtür, Austria. 36 percent of the existing buildings are found in officially declared avalanche hazard zones. The majority of these buildings are either agricultural or accommodation facilities. Additionally, the effects of physical planning and/or technical measures on the spatial development of the potential damage are illustrated. The results serve to improve risk determination and point out an unnoticed increase of damage potential and risk in apparently safe settlement areas.

Evaluation of possibility to increasing sustainability of high-rise buildings through use university intellectual property

NASA Astrophysics Data System (ADS)

Potekhin, Igor; Mischenko, Valeryi; Mottaeva, Angela; Zheltenkov, Alexander

2018-03-01

In this article explained approach of valuation of intellectual property of Voronezh State Technical University, as her usefulness to increasing the sustainability and ecological safety of high-rise building. High-rise building is main type of buildings in modern cities. They include large volume of material mass, high volume of energy using and high volume of emissions. Using innovation solutions to improving ecology safety of high-rise buildings has large potential to city in whole. Explained in the article methods of calculation of effects helps to value sustainable solutions of present and future generations. Thus usefulness of patents express through usefulness regarding to high-rise building, including for sustainable development.

A procedure for seismic risk reduction in Campania Region

NASA Astrophysics Data System (ADS)

Zuccaro, G.; Palmieri, M.; Maggiò, F.; Cicalese, S.; Grassi, V.; Rauci, M.

2008-07-01

The Campania Region has set and performed a peculiar procedure in the field of seismic risk reduction. Great attention has been paid to public strategic buildings such as town halls, civil protection buildings and schools. The Ordinance 3274 promulgate in the 2004 by the Italian central authority obliged the owners of strategic buildings to perform seismic analyses within 2008 in order to check the safety of the structures and the adequacy to the use. In the procedure the Campania region, instead of the local authorities, ensure the complete drafting of seismic checks through financial resources of the Italian Government. A regional scientific technical committee has been constituted, composed of scientific experts, academics in seismic engineering. The committee has drawn up guidelines for the processing of seismic analyses. At the same time, the Region has issued a public competition to select technical seismic engineering experts to appoint seismic analysis in accordance with guidelines. The scientific committee has the option of requiring additional documents and studies in order to approve the safety checks elaborated. The Committee is supported by a technical and administrative secretariat composed of a group of expert in seismic engineering. At the moment several seismic safety checks have been completed. The results will be presented in this paper. Moreover, the policy to mitigate the seismic risk, set by Campania region, was to spend the most of the financial resources available on structural strengthening of public strategic buildings rather than in safety checks. A first set of buildings of which the response under seismic action was already known by data and studies of vulnerability previously realised, were selected for immediate retrofitting designs. Secondly, an other set of buildings were identified for structural strengthening. These were selected by using the criteria specified in the Guide Line prepared by the Scientific Committee and based on data obtained by the first set of safety checks. The strengthening philosophy adopt in the projects will be described in the paper.

The Two-Year Colleges' Role in Building the Future Geoscience Technical Workforce

NASA Astrophysics Data System (ADS)

Wolfe, B.

2014-12-01

Careers in energy science related fields represent significant job growth in the U.S. Yet post-secondary career and technical programs have not kept pace with demand and energy science curriculum, including fundamental concepts of energy generation and environmental impact, lacks a firm position among general or career and technical education courses. Many of these emerging energy related jobs are skilled labor and entry level technical positions requiring less than a bachelor's degree. These include jobs such as solar/photovoltaic design and installation, solar water and space heating installation, energy management, efficiency and conservation auditor, environmental technician, etc. These energy related career pathways fit naturally within the geosciences discipline. Many of these jobs can be filled by individuals from HVAC, Industrial technology, welding, and electrical degree programs needing some additional specialized training and curriculum focused on fundamental concepts of energy, fossil fuel exploration and use, atmospheric pollution, energy generation, alternative energy sources, and energy conservation. Two-year colleges (2ycs) are uniquely positioned to train and fill these workforce needs as they already have existing career and technical programs and attract both recent high school graduates, as well as non-traditional students including displaced workers and returning veterans. We have established geoscience related workforce certificate programs that individuals completing the traditional industrial career and technical degrees can obtain to meet these emerging workforce needs. This presentation will discuss the role of geosciences programs at 2ycs in training these new workers, developing curriculum, and building a career/technical program that is on the forefront of this evolving industry.

Expert Meeting: Optimized Heating Systems Using Condensing Boilers and Baseboard Convectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arena, L.

2013-01-01

On August 11, 2011, in Denver, CO, a Building America Expert Meeting was held in conjunction with the Building America Residential Energy Efficiency Technical Update Meeting, to review and discuss results and future plans for research to improve the performance of hydronic heating systems using condensing boilers and baseboard convectors. A meeting objective was to provide an opportunity for other Building America teams and industry experts to provide feedback and specific suggestions for the planned research.

8. Building 105, Facilities Engineering Building, 1830, interior, drafting area, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. Building 105, Facilities Engineering Building, 1830, interior, drafting area, east side of building, center, looking N. - Watervliet Arsenal, Building 105, South Broadway, on Hudson River, Watervliet, Albany County, NY

District heating and cooling feasibility study, Dunkirk, New York

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objective of this project is to perform a preliminary investigation of the technical and economic feasibility of implementing a district heating and cooling (DHC) system in the City of Dunkirk, New York. The study was conducted by first defining a heating and cooling (HC) load service area. Then, questionnaires were sent to prospective DHC customers. After reviewing the owners responses, large consumers of energy were interviewed for more detail of their HC systems, including site visits, to determine possibilities of retrofitting their systems to district heating and cooling. Peak HC loads for the buildings were estimated by Burns andmore » Roe's in-house computer programs. Based on the peak loads, certain customers were determined for suitability as anchor customers. Various options using cogeneration were investigated for possible HC sources. Equipment for HC sources and HC loads were sized and their associated costs estimated. Finally, economic analyses were performed. The conclusion is that it is technically and economically feasible to implement a district heating and cooling system in the City of Dunkirk. 14 figs., 15 tabs.« less

WEAPONS STORAGE AREA, LOOKING TOWARD ELECTRIC POWER STATION BUILDING (BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

WEAPONS STORAGE AREA, LOOKING TOWARD ELECTRIC POWER STATION BUILDING (BUILDING 3583), STORAGE BUILDING (BUILDING 3584)NIGHT AND SECURITY POLICE ENTRY CONTROL (BUILDING 3582)LEFT. VIEW TO NORTHEAST - Plattsburgh Air Force Base, U.S. Route 9, Plattsburgh, Clinton County, NY

Capacity building for health inequality monitoring in Indonesia: enhancing the equity orientation of country health information systems

PubMed Central

Tawilah, Jihane; Schlotheuber, Anne; Bateman, Massee; Davey, Tamzyn; Kusumawardani, Nunik; Myint, Theingi; Nuryetty, Mariet Tetty; Prasetyo, Sabarinah; Suparmi; Floranita, Rustini

2018-01-01

ABSTRACT Background: Inequalities in health represent a major problem in many countries, including Indonesia. Addressing health inequality is a central component of the Sustainable Development Goals and a priority of the World Health Organization (WHO). WHO provides technical support for health inequality monitoring among its member states. Following a capacity-building workshop in the WHO South-East Asia Region in 2014, Indonesia expressed interest in incorporating health-inequality monitoring into its national health information system. Objectives: This article details the capacity-building process for national health inequality monitoring in Indonesia, discusses successes and challenges, and how this process may be adapted and implemented in other countries/settings. Methods: We outline key capacity-building activities undertaken between April 2016 and December 2017 in Indonesia and present the four key outcomes of this process. Results: The capacity-building process entailed a series of workshops, meetings, activities, and processes undertaken between April 2016 and December 2017. At each stage, a range of stakeholders with access to the relevant data and capacity for data analysis, interpretation and reporting was engaged with, under the stewardship of state agencies. Key steps to strengthening health inequality monitoring included capacity building in (1) identification of the health topics/areas of interest, (2) mapping data sources and identifying gaps, (3) conducting equity analyses using raw datasets, and (4) interpreting and reporting inequality results. As a result, Indonesia developed its first national report on the state of health inequality. A number of peer-reviewed manuscripts on various aspects of health inequality in Indonesia have also been developed. Conclusions: The capacity-building process undertaken in Indonesia is designed to be adaptable to other contexts. Capacity building for health inequality monitoring among countries is a critical step for strengthening equity-oriented national health information systems and eventually tackling health inequities. PMID:29569528

Automatic generation and simulation of urban building energy models based on city datasets for city-scale building retrofit analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Yixing; Hong, Tianzhen; Piette, Mary Ann

Buildings in cities consume 30–70% of total primary energy, and improving building energy efficiency is one of the key strategies towards sustainable urbanization. Urban building energy models (UBEM) can support city managers to evaluate and prioritize energy conservation measures (ECMs) for investment and the design of incentive and rebate programs. This paper presents the retrofit analysis feature of City Building Energy Saver (CityBES) to automatically generate and simulate UBEM using EnergyPlus based on cities’ building datasets and user-selected ECMs. CityBES is a new open web-based tool to support city-scale building energy efficiency strategic plans and programs. The technical details ofmore » using CityBES for UBEM generation and simulation are introduced, including the workflow, key assumptions, and major databases. Also presented is a case study that analyzes the potential retrofit energy use and energy cost savings of five individual ECMs and two measure packages for 940 office and retail buildings in six city districts in northeast San Francisco, United States. The results show that: (1) all five measures together can save 23–38% of site energy per building; (2) replacing lighting with light-emitting diode lamps and adding air economizers to existing heating, ventilation and air-conditioning (HVAC) systems are most cost-effective with an average payback of 2.0 and 4.3 years, respectively; and (3) it is not economical to upgrade HVAC systems or replace windows in San Francisco due to the city's mild climate and minimal cooling and heating loads. Furthermore, the CityBES retrofit analysis feature does not require users to have deep knowledge of building systems or technologies for the generation and simulation of building energy models, which helps overcome major technical barriers for city managers and their consultants to adopt UBEM.« less

Automatic generation and simulation of urban building energy models based on city datasets for city-scale building retrofit analysis

DOE PAGES

Chen, Yixing; Hong, Tianzhen; Piette, Mary Ann

2017-08-07

Buildings in cities consume 30–70% of total primary energy, and improving building energy efficiency is one of the key strategies towards sustainable urbanization. Urban building energy models (UBEM) can support city managers to evaluate and prioritize energy conservation measures (ECMs) for investment and the design of incentive and rebate programs. This paper presents the retrofit analysis feature of City Building Energy Saver (CityBES) to automatically generate and simulate UBEM using EnergyPlus based on cities’ building datasets and user-selected ECMs. CityBES is a new open web-based tool to support city-scale building energy efficiency strategic plans and programs. The technical details ofmore » using CityBES for UBEM generation and simulation are introduced, including the workflow, key assumptions, and major databases. Also presented is a case study that analyzes the potential retrofit energy use and energy cost savings of five individual ECMs and two measure packages for 940 office and retail buildings in six city districts in northeast San Francisco, United States. The results show that: (1) all five measures together can save 23–38% of site energy per building; (2) replacing lighting with light-emitting diode lamps and adding air economizers to existing heating, ventilation and air-conditioning (HVAC) systems are most cost-effective with an average payback of 2.0 and 4.3 years, respectively; and (3) it is not economical to upgrade HVAC systems or replace windows in San Francisco due to the city's mild climate and minimal cooling and heating loads. Furthermore, the CityBES retrofit analysis feature does not require users to have deep knowledge of building systems or technologies for the generation and simulation of building energy models, which helps overcome major technical barriers for city managers and their consultants to adopt UBEM.« less

Technical - Economic Research for Passive Buildings

NASA Astrophysics Data System (ADS)

Miniotaite, Ruta

2017-10-01

A newly constructed passive house must save 80 % of heat resources; otherwise it is not a passive house. The heating energy demand of a passive building is less than 15 kWh/m2 per year. However, a passive house is something more than just an energy-saving house. This concept involves sustainable, high-quality, valuable, healthy and durable construction. Features of a passive house: high insulation of envelope components, high-quality windows, good tightness of the building, regenerative ventilation system and elimination of thermal bridges. The Energy Performance of Buildings Directive (EPBD) 61 requires all new public buildings to become near-zero energy buildings by 2019 and will be extended to all new buildings by 2021. This concept involves sustainable, high-quality, valuable, healthy and durable construction. Foundation, walls and roofs are the most essential elements of a house. The type of foundation for a private house is selected considering many factors. The article examines technological and structural solutions for passive buildings foundation, walls and roofs. The technical-economic comparison of the main structures of a passive house revealed that it is cheaper to install an adequately designed concrete slab foundation than to build strip or pile foundation and the floor separately. Timber stud walls are the cheapest wall option for a passive house and 45-51% cheaper compared to other options. The comparison of roofs and ceilings showed that insulation of the ceiling is 25% more efficient than insulation of the roof. The comparison of the main envelope elements efficiency by multiple-criteria evaluation methods showed that it is economically feasible to install concrete slab on ground foundation, stud walls with sheet cladding and a pitched roof with insulated ceiling.

A qualitative study of governance of evolving response to non-communicable diseases in low-and middle- income countries: current status, risks and options.

PubMed

Rani, Manju; Nusrat, Sharmin; Hawken, Laura H

2012-10-16

Segmented service delivery with consequent inefficiencies in health systems was one of the main concerns raised during scaling up of disease-specific programs in the last two decades. The organized response to NCD is in infancy in most LMICs with little evidence on how the response is evolving in terms of institutional arrangements and policy development processes. Drawing on qualitative review of policy and program documents from five LMICs and data from global key-informant surveys conducted in 2004 and 2010, we examine current status of governance of response to NCDs at national level along three dimensions- institutional arrangements for stewardship and program management and implementation; policies/plans; and multisectoral coordination and partnerships. Several positive trends were noted in the organization and governance of response to NCDs: shift from specific NCD-based programs to integrated NCD programs, increasing inclusion of NCDs in sector-wide health plans, and establishment of high-level multisectoral coordination mechanisms.Several areas of concern were identified. The evolving NCD-specific institutional structures are being treated as 'program management and implementation' entities rather than as lead 'technical advisory' bodies, with unclear division of roles and responsibilities between NCD-specific and sector-wide structures. NCD-specific and sector-wide plans are poorly aligned and lack prioritization, costing, and appropriate targets. Finally, the effectiveness of existing multisectoral coordination mechanisms remains questionable. The 'technical functions' and 'implementation and management functions' should be clearly separated between NCD-specific units and sector-wide institutional structures to avoid duplicative segmented service delivery systems. Institutional capacity building efforts for NCDs should target both NCD-specific units (for building technical and analytical capacity) and sector-wide organizational units (for building program management and implementation capacity) in MOH.The sector-wide health plans should reflect NCDs in proportion to their public health importance. NCD specific plans should be developed in close consultation with sector-wide health- and non-health stakeholders. These plans should expand on the directions provided by sector-wide health plans specifying strategically prioritized, fully costed activities, and realistic quantifiable targets for NCD control linked with sector-wide expenditure framework. Multisectoral coordination mechanisms need to be strengthened with optimal decision-making powers and resource commitment and monitoring of their outputs.

A qualitative study of governance of evolving response to non-communicable diseases in low-and middle- income countries: current status, risks and options

PubMed Central

2012-01-01

Background Segmented service delivery with consequent inefficiencies in health systems was one of the main concerns raised during scaling up of disease-specific programs in the last two decades. The organized response to NCD is in infancy in most LMICs with little evidence on how the response is evolving in terms of institutional arrangements and policy development processes. Methods Drawing on qualitative review of policy and program documents from five LMICs and data from global key-informant surveys conducted in 2004 and 2010, we examine current status of governance of response to NCDs at national level along three dimensions— institutional arrangements for stewardship and program management and implementation; policies/plans; and multisectoral coordination and partnerships. Results Several positive trends were noted in the organization and governance of response to NCDs: shift from specific NCD-based programs to integrated NCD programs, increasing inclusion of NCDs in sector-wide health plans, and establishment of high-level multisectoral coordination mechanisms. Several areas of concern were identified. The evolving NCD-specific institutional structures are being treated as ‘program management and implementation’ entities rather than as lead ‘technical advisory’ bodies, with unclear division of roles and responsibilities between NCD-specific and sector-wide structures. NCD-specific and sector-wide plans are poorly aligned and lack prioritization, costing, and appropriate targets. Finally, the effectiveness of existing multisectoral coordination mechanisms remains questionable. Conclusions The ‘technical functions’ and ‘implementation and management functions’ should be clearly separated between NCD-specific units and sector-wide institutional structures to avoid duplicative segmented service delivery systems. Institutional capacity building efforts for NCDs should target both NCD-specific units (for building technical and analytical capacity) and sector-wide organizational units (for building program management and implementation capacity) in MOH. The sector-wide health plans should reflect NCDs in proportion to their public health importance. NCD specific plans should be developed in close consultation with sector-wide health- and non-health stakeholders. These plans should expand on the directions provided by sector-wide health plans specifying strategically prioritized, fully costed activities, and realistic quantifiable targets for NCD control linked with sector-wide expenditure framework. Multisectoral coordination mechanisms need to be strengthened with optimal decision-making powers and resource commitment and monitoring of their outputs. PMID:23067232

Building capacity for HIV/AIDS prevention among Asian Pacific Islander organizations: the experience of a culturally appropriate capacity-building program in Southern California.

PubMed

Takahashi, Lois M; Candelario, Jury; Young, Tim; Mediano, Elizabeth

2007-01-01

This article has two goals: (1) to outline a conceptual model for culturally appropriate HIV prevention capacity building; (2) to present the experiences from a 3-year program provided by Asian Pacific AIDS Intervention Team to Asian Pacific Islander (API) organizations in southern California. The participating organizations were of two types: lesbian, gay, bisexual, transgender, and questioning (LGBTQ) social organizations and social service agencies not targeting LGBTQ. These organizations were selected for participation because of their commitment to HIV/AIDS issues in API communities. An organizational survey and staff observations were used to explore changes in capacity. The organizations were mostly small, targeted diverse populations, served a large geographic area (southern California as a region), and were knowledgeable about HIV. Organizations became more viable (more capacity in human resources, financial, external relations, and strategic management), but also more unstable (large growth in paid staff and board members), and showed more capacity in HIV knowledge environments (especially less stigma and more sensitivity to diverse populations). The results suggest that capacity can expand over a short period of time, but as capacity increases, organizational viability/stability and HIV knowledge environments change, meaning that different types of technical assistance would be needed for sustainability.

Arch Venture Partners' investment considerations for CBRNE products and opportunities

NASA Astrophysics Data System (ADS)

Crandell, K.; Lazarus, S.; Gardner, P. J.

2008-04-01

ARCH is interested in building leading, highly-valued companies from leading research. Toward that end we value innovations created by the leading researchers in the world, many of which are funded to solve critical scientific challenges including those in the instrumentation and CBRNE area. The most important CBRNE innovations we have seen at ARCH are breakthroughs involving significant unaddressed technology risk and have the potential for broad proprietary intellectual property as a result. The model ARCH has evolved in instrumentation is to look for a breakthrough innovation, with strong intellectual property and continue to strengthen the patent estate through the life of the company. ARCH looks to build companies around leading interdisciplinary scientific and engineering teams, and we favor platform technology that can be applied to multiple market applications both commercial and government. As part of a strategy to build a great company, addressing important CBRNE challenges can help a company strengthen its technical team and its IP estate. This supports a focus on early low volume markets on the way toward addressing a fuller portfolio of applications. Experienced Venture Capitalists can help this process by identifying important executive talent, partners and applications, offering financial syndication strength, and helping shape the company's strategy to maximize the ultimate value realized.

A web-based Decision Support System for the optimal management of construction and demolition waste.

PubMed

Banias, G; Achillas, Ch; Vlachokostas, Ch; Moussiopoulos, N; Papaioannou, I

2011-12-01

Wastes from construction activities constitute nowadays the largest by quantity fraction of solid wastes in urban areas. In addition, it is widely accepted that the particular waste stream contains hazardous materials, such as insulating materials, plastic frames of doors, windows, etc. Their uncontrolled disposal result to long-term pollution costs, resource overuse and wasted energy. Within the framework of the DEWAM project, a web-based Decision Support System (DSS) application - namely DeconRCM - has been developed, aiming towards the identification of the optimal construction and demolition waste (CDW) management strategy that minimises end-of-life costs and maximises the recovery of salvaged building materials. This paper addresses both technical and functional structure of the developed web-based application. The web-based DSS provides an accurate estimation of the generated CDW quantities of twenty-one different waste streams (e.g. concrete, bricks, glass, etc.) for four different types of buildings (residential, office, commercial and industrial). With the use of mathematical programming, the DeconRCM provides also the user with the optimal end-of-life management alternative, taking into consideration both economic and environmental criteria. The DSS's capabilities are illustrated through a real world case study of a typical five floor apartment building in Thessaloniki, Greece. Copyright © 2011 Elsevier Ltd. All rights reserved.

7. PHOTOCOPY OF DRAWING (UNDATED PLAN AND SCHEDULE DRAWING BY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. PHOTOCOPY OF DRAWING (UNDATED PLAN AND SCHEDULE DRAWING BY THE DEPARTMENT OF THE AIR FORCE, SPACE AND MISSILE TEST CENTER) MATERIAL SPECIFICATIONS AND GENERAL NOTES FOR INTERIOR FINISHING FOR BUILDING 762-A, SHEET A4 - Vandenberg Air Force Base, Space Launch Complex 3, Technical Support Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

LE[superscript 3]AD Academy Builds Professionalism in Vocational Students

ERIC Educational Resources Information Center

Hall, Candace

2012-01-01

Principal David Wheeler of Southeastern Regional Vocational-Technical High School founded LE[superscript 3]AD Academy--an innovative program that gives students the opportunity to build and run their own town in teams and with guidance from teachers. The program started in the spring of 2011, and it is innovative in many ways. The students' main…

Plumbing Specialist II & III, 3-22. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

These military-developed curriculum materials consist of a course description, course chart, plan of instruction, lesson plans, study guides, and workbooks for use in training plumbing specialists II and III. Covered in the course blocks are building waste systems and exterior and interior supply systems. Course block II, on building waste…

Solar Cooling for Buildings. Workshop Proceedings (Los Angeles, California, February 6-8, 1974).

ERIC Educational Resources Information Center

de Winter, Francis, Ed.

A consensus has developed among U.S. solar researchers that the solar-powered cooling of buildings is an important topic. Most solar heating systems are technically simpler, and more highly developed, than solar cooling devices are. The determination of the best design concept for any particular application is not a simple process. Significant…

An Outcome Evaluation of the Success for Kids Program. Technical Report

ERIC Educational Resources Information Center

Maestas, Nicole; Gaillot, Sarah

2010-01-01

This report presents results from a multisite, quantitative evaluation of the international Success for Kids (SFK) after-school program. The program seeks to build resilience in children by teaching them to access inner resources and build positive connections with others. The SFK program is unlike most after-school programs both in its focus on…

Crime Prevention in Schools: Specification, Installation, and Maintenance of Intruder Alarm Systems. Building Bulletin 69.

ERIC Educational Resources Information Center

Haworth-Roberts, A., Ed.

Greater use of expensive equipment by schools has also increased the potential for vandalism and theft, giving an increased role to intruder alarm systems. This document provides guidance on the management and technical aspects of forming policies for installing and operating intruder alarm systems in educational buildings. Also provided are…

Existing Whole-House Solutions Case Study: Build San Antonio Green, San Antonio, Texas

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2013-06-01

PNNL, FSEC, and CalcsPlus provided technical assistance to Build San Antonio Green on three deep energy retrofits. For this gut rehab they replaced the old roof with a steeper roof and replaced drywall while adding insulation, new HVAC, sealed ducts, transfer grilles, outside air run-time ventilation, new lighting and water heater.

Closed Circuit TV Surveillance Systems in Educational Buildings: Crime Prevention in Schools. Building Bulletin 75.

ERIC Educational Resources Information Center

Whitehouse, B.; Patel, M.; Gofton, K.

Recent years have shown an increase in arson, theft, and vandalism committed in educational facilities resulting in a need for managers to formulate security policies. This document provides technical advice and guidance on policy for the design, specification, installation, maintenance, operation, and management of closed circuit TV (CCTV)…

78 FR 63500 - Bureau of Labor Statistics Technical Advisory Committee; Notice of Meeting and Agenda

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

... meet on Friday, November 8, 2013. The meeting will be held in the Postal Square Building, 2... held in rooms 1 and 2 of the Postal Square Building Conference Center. The schedule and agenda for the.... Individuals who require special accommodations should contact Ms. Fieldhouse at least two days prior to the...

Building Capability in Vocational Education and Training Providers: The TAFE Cut. Occasional Paper

ERIC Educational Resources Information Center

Guthrie, Hugh; Clayton, Berwyn

2010-01-01

This paper focuses on issues which affect the capability of technical and further education (TAFE) providers to meet their clients' and stakeholders' needs and draws extensively on the reports of the consortium research program which examined ways to help build vocational education and training (VET) provider and workforce capability. The paper…

Teachers' and Students' Perception of Instructional Supervision on Capacity Building in Electrical Installation Trade

ERIC Educational Resources Information Center

Eze, Ogwa Christopher

2015-01-01

This research was conducted to ascertain teachers' and students perception of instructional supervision in relation to capacity building in electrical installation trade in technical colleges. Three research questions and a null hypothesis were employed to guide the study. Descriptive survey was adopted. A 23-item questionnaire was used to elicit…

Building Social Capital in Groups: Facilitating Skill Development for Natural Resource Management

ERIC Educational Resources Information Center

Kilpatrick, Sue

2007-01-01

Analysis of the experiences of four farmer groups set up to learn how to jointly manage local natural resource issues shows that the groups are going though two simultaneous processes. One builds technical competency in natural resource management and the other is the underpinning social process that allows the groups to make decisions and work…

Communication between Participants and Non-Participants in Analytical Capacity Building Projects: Management Advice to Family Farms in Benin

ERIC Educational Resources Information Center

Rouchouse, Marine; Faysse, Nicolas; De Romemont, Aurelle; Moumouni, Ismail; Faure, Guy

2015-01-01

Purpose: Approaches to build farmers' analytical capacities are said to trigger wide-ranging changes. This article reports on the communication process between participants and non-participants in one such approach, related to the technical and management skills learned by participants and the changes these participants subsequently made, and the…

Enhancing Earth Observation Capacity in the Himalayan Region

NASA Astrophysics Data System (ADS)

Shrestha, B. R.

2012-12-01

Earth observations bear special significance in the Himalayan Region owing to the fact that routine data collections are often hampered by highly inaccessible terrain and harsh climatic conditions. The ongoing rapid environmental changes have further emphasized its relevance and use for informed decision-making. The International Center for Integrated Mountain Development (ICIMOD), with a regional mandate is promoting the use of earth observations in line with the GEOSS societal benefit areas. ICIMOD has a proven track record to utilize earth observations notably in the areas of understanding glaciers and snow dynamics, disaster risk preparedness and emergency response, carbon estimation for community forestry user groups, land cover change assessment, agriculture monitoring and food security analysis among others. This paper presents the challenges and lessons learned as a part of capacity building of ICIMOD to utilize earth observations with the primary objectives to empower its member countries and foster regional cooperation. As a part of capacity building, ICIMOD continues to make its efforts to augment as a regional resource center on earth observation and geospatial applications for sustainable mountain development. Capacity building possesses multitude of challenges in the region: the complex geo-political reality with differentiated capacities of member states, poorer institutional and technical infrastructure; addressing the needs for multiple user and target groups; integration with different thematic disciplines; and high resources intensity and sustainability. A capacity building framework was developed based on detailed needs assessment with a regional approach and strategy to enhance capability of ICIMOD and its network of national partners. A specialized one-week training course and curriculum have been designed for different thematic areas to impart knowledge and skills that include development practitioners, professionals, researchers and scientists. These courses include relevant theoretical lectures on the specific themes and extensive hands-on exercises using remote sensing and GIS tools and techniques. A one-day policy workshop has been designed to raise awareness among managers and decision-makers. Within the framework of SERVIR-Himalaya, a specialized training and awareness course has been initiated targeting to the youth. This course focuses on utilizing earth observation to sensitize youth and help them better understand climate change in the Himalayas. Furthermore, ICIMOD is strengthening existing partnerships and developing new partnerships to keep pace with rapidly changing technological advancements in order to customize the capacity building needs for the region. ICIMOD is promoting the Himalayan University consortium to extend its capacity building efforts for a longer-term continuity and sustainability. Through the SERVIR-Himalaya initiative, it is aiming to build new capacity building components such as - NASA DEVELOP to engage student research, MYCOE programs for youth, and small grants programs for young researchers and professionals. As a regional center, ICIMOD wants to continue to build regional capacity with the ultimate goal to leverage geospatial information services for the societal benefits to the mountain communities and relevant stakeholders.

Developing and Validating the Socio-Technical Model in Ontology Engineering

NASA Astrophysics Data System (ADS)

Silalahi, Mesnan; Indra Sensuse, Dana; Giri Sucahyo, Yudho; Fadhilah Akmaliah, Izzah; Rahayu, Puji; Cahyaningsih, Elin

2018-03-01

This paper describes results from an attempt to develop a model in ontology engineering methodology and a way to validate the model. The approach to methodology in ontology engineering is from the point view of socio-technical system theory. Qualitative research synthesis is used to build the model using meta-ethnography. In order to ensure the objectivity of the measurement, inter-rater reliability method was applied using a multi-rater Fleiss Kappa. The results show the accordance of the research output with the diamond model in the socio-technical system theory by evidence of the interdependency of the four socio-technical variables namely people, technology, structure and task.

50. Photocopy of Architectural drawing, dated August 6, 1976 by ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

50. Photocopy of Architectural drawing, dated August 6, 1976 by Raytheon Company. Original drawing property of United States Air Force, 21" Space Command. A-5 - PAVE PAWS TECHNICAL FACILITY - OTIS AFB - FOURTH FLOOR AND PLATFORM 4A. DRAWING NO. AW35-46-06 - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

52. Photocopy of Architectural drawing, dated August 6, 1976 by ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

52. Photocopy of Architectural drawing, dated August 6, 1976 by Raytheon Company. Original drawing property of United States Air Force, 21' Space Command. A-10 - PAVE PAWS TECHNICAL FACILITY - OTIS AFB - ELEVATION A, B AND C. DRAWING NO. AW35-46-06 - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

51. Photocopy of Architectural drawing, dated August 6, 1976 by ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

51. Photocopy of Architectural drawing, dated August 6, 1976 by Raytheon Company. Original drawing property of United States Air Force, 21" Space Command. A-6 - PAVE PAWS TECHNICAL FACILITY - OTIS AFB - FIFTH FLOOR AND PLATFORM 5A. DRAWING NO. AW35-46-06 - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

49. Photocopy of Architectural drawing, dated August 6, 1976 by ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

49. Photocopy of Architectural drawing, dated August 6, 1976 by Raytheon Company. Original drawing property of United States Air Force, 21" Space Command. A-4 - PAVE PAWS TECHNICAL FACILITY - OTIS AFB - THIRD FLOOR AND PLATFORM 3A. DRAWING NO. AW35-46-06 - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

10 CFR 455.123 - Grantee records and reports for State grants for administrative expenses, technical assistance...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Grantee records and reports for State grants for administrative expenses, technical assistance, program assistance, and marketing. 455.123 Section 455.123 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION GRANT PROGRAMS FOR SCHOOLS AND HOSPITALS AND BUILDINGS OWNED BY UNITS OF LOCAL GOVERNMENT AND PUBLIC CAR...

10 CFR 455.134 - Forwarding of applications for State grants for technical assistance, program assistance, and...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Forwarding of applications for State grants for technical assistance, program assistance, and marketing. 455.134 Section 455.134 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION GRANT PROGRAMS FOR SCHOOLS AND HOSPITALS AND BUILDINGS OWNED BY UNITS OF LOCAL GOVERNMENT AND PUBLIC CARE INSTITUTIONS State...

Flexible Authoring and Delivery of Online Courses Using IMS Learning Design

ERIC Educational Resources Information Center

Hermans, Henry; Janssen, José; Koper, Rob

2016-01-01

Since the publication of the IMS Learning Design (IMS LD) specification in 2003, many initiatives have been undertaken to build authoring tools that are simple enough to be used by non-technical instructors and teachers. IMS LD's technical complexity is believed to be a major burden for the adoption of the specification. We have developed a new…

122. Back side technical facilities S.R. radar transmitter & computer ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

122. Back side technical facilities S.R. radar transmitter & computer building no. 102, section II "elevations & details" - structural, AS-BLT AW 35-46-04, sheet 73, dated 23 January, 1961. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

121. Back side technical facilities S.R. radar transmitter & computer ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

121. Back side technical facilities S.R. radar transmitter & computer building no. 102, section II "sections & elevations" - structural, AS-BLT AW 35-46-04, sheet 72, dated 23 January, 1961. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

Expanding Opportunities: Postsecondary Career and Technical Education and Preparing Tomorrow's Workforce. A Position Paper

ERIC Educational Resources Information Center

Visger, Brett

2007-01-01

With nearly a third of all students in for-credit postsecondary education enrolled in career and technical education (CTE) programs, CTE is a valuable partner in moving reform efforts forward at the postsecondary level by providing leadership in pedagogy as well as systems-building and economic development. This enables CTE to play the role of…

Improving quality of reproductive health care in Senegal through formative supervision: results from four districts.

PubMed

Suh, Siri; Moreira, Philippe; Ly, Moussa

2007-11-29

In Senegal, traditional supervision often focuses more on collection of service statistics than on evaluation of service quality. This approach yields limited information on quality of care and does little to improve providers' competence. In response to this challenge, Management Sciences for Health (MSH) has implemented a program of formative supervision. This multifaceted, problem-solving approach collects data on quality of care, improves technical competence, and engages the community in improving reproductive health care. This study evaluated changes in service quality and community involvement after two rounds of supervision in 45 health facilities in four districts of Senegal. We used checklists to assess quality in four areas of service delivery: infrastructure, staff and services management, record-keeping, and technical competence. We also measured community involvement in improving service quality using the completion rates of action plans. The most notable improvement across regions was in infection prevention.Management of staff, services, and logistics also consistently improved across the four districts. Record-keeping skills showed variable but lower improvement by region. The completion rates of action plans suggest that communities are engaged in improving service quality in all four districts. Formative supervision can improve the quality of reproductive health services, especially in areas where there is on-site skill building and refresher training. This approach can also mobilize communities to participate in improving service quality.

Improving quality of reproductive health care in Senegal through formative supervision: results from four districts

PubMed Central

Suh, Siri; Moreira, Philippe; Ly, Moussa

2007-01-01

Background In Senegal, traditional supervision often focuses more on collection of service statistics than on evaluation of service quality. This approach yields limited information on quality of care and does little to improve providers' competence. In response to this challenge, Management Sciences for Health (MSH) has implemented a program of formative supervision. This multifaceted, problem-solving approach collects data on quality of care, improves technical competence, and engages the community in improving reproductive health care. Methods This study evaluated changes in service quality and community involvement after two rounds of supervision in 45 health facilities in four districts of Senegal. We used checklists to assess quality in four areas of service delivery: infrastructure, staff and services management, record-keeping, and technical competence. We also measured community involvement in improving service quality using the completion rates of action plans. Results The most notable improvement across regions was in infection prevention. Management of staff, services, and logistics also consistently improved across the four districts. Record-keeping skills showed variable but lower improvement by region. The completion rates of action plans suggest that communities are engaged in improving service quality in all four districts. Conclusion Formative supervision can improve the quality of reproductive health services, especially in areas where there is on-site skill building and refresher training. This approach can also mobilize communities to participate in improving service quality. PMID:18047678

Introduction to System Health Engineering and Management in Aerospace

NASA Technical Reports Server (NTRS)

Johnson, Stephen B.

2005-01-01

This paper provides a technical overview of Integrated System Health Engineering and Management (ISHEM). We define ISHEM as "the paper provides a techniques, and technologies used to design, analyze, build, verify, and operate a system to prevent faults and/or minimize their effects." This includes design and manufacturing techniques as well operational and managerial methods. ISHEM is not a "purely technical issue" as it also involves and must account for organizational, communicative, and cognitive f&ms of humans as social beings and as individuals. Thus the paper will discuss in more detail why all of these elements, h m the technical to the cognitive and social, are necessary to build dependable human-machine systems. The paper outlines a functional homework and architecture for ISHEM operations, describes the processes needed to implement ISHEM in the system life-cycle, and provides a theoretical framework to understand the relationship between the different aspects of the discipline. It then derives from these and the social and cognitive bases a set of design and operational principles for ISHEM.

Health service resilience in Yobe state, Nigeria in the context of the Boko Haram insurgency: a systems dynamics analysis using group model building.

PubMed

Ager, Alastair K; Lembani, Martina; Mohammed, Abdulaziz; Mohammed Ashir, Garba; Abdulwahab, Ahmad; de Pinho, Helen; Delobelle, Peter; Zarowsky, Christina

2015-01-01

Yobe State has faced severe disruption of its health service as a result of the Boko Haram insurgency. A systems dynamics analysis was conducted to identify key pathways of threat to provision and emerging pathways of response and adaptation. Structured interviews were conducted with 39 stakeholders from three local government areas selected to represent the diversity of conflict experience across the state: Damaturu, Fune and Nguru, and with four officers of the PRRINN-MNCH program providing technical assistance for primary care development in the state. A group model building session was convened with 11 senior stakeholders, which used participatory scripts to review thematic analysis of interviews and develop a preliminary systems model linking identified variables. Population migration and transport restrictions have substantially impacted access to health provision. The human resource for health capability of the state has been severely diminished through the outward migration of (especially non-indigenous) health workers and the suspension of programmes providing external technical assistance. The political will of the Yobe State government to strengthen health provision - through lifting a moratorium on recruitment and providing incentives for retention and support of staff - has supported a recovery of health systems functioning. Policies of free-drug provision and decentralized drug supply appear to have been protective of the operation of the health system. Community resources and cohesion have been significant assets in combatting the impacts of the insurgency on service utilization and quality. Staff commitment and motivation - particularly amongst staff indigenous to the state - has protected health care quality and enabled flexibility of human resource deployment. A systems analysis using participatory group model building provided a mechanism to identify key pathways of threat and adaptation with regard to health service functioning. Generalizable systems characteristics supportive of resilience are suggested, and linked to wider discussion of the role of factors such as diversity, self-regulation and integration.

Confidence building measures at sea:opportunities for India and Pakistan.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vohra, Ravi Bhushan Rear Admiral; ); Ansari, Hasan Masood Rear Admiral

2003-12-01

The sea presents unique possibilities for implementing confidence building measures (CBMs) between India and Pakistan that are currently not available along the contentious land borders surrounding Jammu and Kashmir. This is due to the nature of maritime issues, the common military culture of naval forces, and a less contentious history of maritime interaction between the two nations. Maritime issues of mutual concern provide a strong foundation for more far-reaching future CBMs on land, while addressing pressing security, economic, and humanitarian needs at sea in the near-term. Although Indian and Pakistani maritime forces currently have stronger opportunities to cooperate with onemore » another than their counterparts on land, reliable mechanisms to alleviate tension or promote operational coordination remain non-existent. Therefore, possible maritime CBMs, as well as pragmatic mechanisms to initiate and sustain cooperation, require serious examination. This report reflects the unique joint research undertaking of two retired Senior Naval Officers from both India and Pakistan, sponsored by the Cooperative Monitoring Center of the International Security Center at Sandia National Laboratories. Research focuses on technology as a valuable tool to facilitate confidence building between states having a low level of initial trust. Technical CBMs not only increase transparency, but also provide standardized, scientific means of interacting on politically difficult problems. Admirals Vohra and Ansari introduce technology as a mechanism to facilitate consistent forms of cooperation and initiate discussion in the maritime realm. They present technical CBMs capable of being acted upon as well as high-level political recommendations regarding the following issues: (1) Delimitation of the maritime boundary between India and Pakistan and its relationship to the Sir Creek dispute; (2) Restoration of full shipping links and the security of ports and cargos; (3) Fishing within disputed areas and resolution of issues relating to arrest and repatriation of fishermen from both sides; and (4) Naval and maritime agency interaction and possibilities for cooperation.« less

Canister Storage Building (CSB) Hazard Analysis Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

POWERS, T.B.

2000-03-16

This report describes the methodology used in conducting the Canister Storage Building (CSB) Hazard Analysis to support the final CSB Safety Analysis Report and documents the results. This report describes the methodology used in conducting the Canister Storage Building (CSB) hazard analysis to support the CSB final safety analysis report (FSAR) and documents the results. The hazard analysis process identified hazardous conditions and material-at-risk, determined causes for potential accidents, identified preventive and mitigative features, and qualitatively estimated the frequencies and consequences of specific occurrences. The hazard analysis was performed by a team of cognizant CSB operations and design personnel, safetymore » analysts familiar with the CSB, and technical experts in specialty areas. The material included in this report documents the final state of a nearly two-year long process. Attachment A provides two lists of hazard analysis team members and describes the background and experience of each. The first list is a complete list of the hazard analysis team members that have been involved over the two-year long process. The second list is a subset of the first list and consists of those hazard analysis team members that reviewed and agreed to the final hazard analysis documentation. The material included in this report documents the final state of a nearly two-year long process involving formal facilitated group sessions and independent hazard and accident analysis work. The hazard analysis process led to the selection of candidate accidents for further quantitative analysis. New information relative to the hazards, discovered during the accident analysis, was incorporated into the hazard analysis data in order to compile a complete profile of facility hazards. Through this process, the results of the hazard and accident analyses led directly to the identification of safety structures, systems, and components, technical safety requirements, and other controls required to protect the public, workers, and environment.« less

Building a world-wide open source community around a software framework: progress, dos, and don'ts

NASA Astrophysics Data System (ADS)

Ibsen, Jorge; Antognini, Jonathan; Avarias, Jorge; Caproni, Alessandro; Fuessling, Matthias; Gimenez, Guillermo; Verma, Khushbu; Mora, Matias; Schwarz, Joseph; Staig, Tomás.

2016-08-01

As we all know too well, building up a collaborative community around a software infrastructure is not easy. Besides recruiting enthusiasts to work as part of it, mostly for free, to succeed you also need to overcome a number of technical, sociological, and, to our surprise, some political hurdles. The ALMA Common Software (ACS) was developed at ESO and partner institutions over the course of more than 10 years. While it was mainly intended for the ALMA Observatory, it was early on thought as a generic distributed control framework. ACS has been periodically released to the public through an LGPL license, which encouraged around a dozen non-ALMA institutions to make use of ACS for both industrial and educational applications. In recent years, the Cherenkov Telescope Array and the LLAMA Observatory have also decided to adopt the framework for their own control systems. The aim of the "ACS Community" is to support independent initiatives in making use of the ACS framework and to further contribute to its development. The Community provides access to a growing network of volunteers eager to develop ACS in areas that are not necessarily in ALMA's interests, and/or were not within the original system scope. Current examples are: support for additional OS platforms, extension of supported hardware interfaces, a public code repository and a build farm. The ACS Community makes use of existing collaborations with Chilean and Brazilian universities, reaching out to promising engineers in the making. At the same time, projects actively using ACS have committed valuable resources to assist the Community's work. Well established training programs like the ACS Workshops are also being continued through the Community's work. This paper aims to give a detailed account of the ongoing (second) journey towards establishing a world-wide open source collaboration around ACS. The ACS Community is growing into a horizontal partnership across a decentralized and diversified group of actors, and we are excited about its technical and human potential.

Identification of cost effective energy conservation measures

NASA Technical Reports Server (NTRS)

Bierenbaum, H. S.; Boggs, W. H.

1978-01-01

In addition to a successful program of readily implemented conservation actions for reducing building energy consumption at Kennedy Space Center, recent detailed analyses have identified further substantial savings for buildings representative of technical facilities designed when energy costs were low. The techniques employed for determination of these energy savings consisted of facility configuration analysis, power and lighting measurements, detailed computer simulations and simulation verifications. Use of these methods resulted in identification of projected energy savings as large as $330,000 a year (approximately two year break-even period) in a single building. Application of these techniques to other commercial buildings is discussed

Design, Specification and Construction of Specialized Measurement System in the Experimental Building

NASA Astrophysics Data System (ADS)

Fedorczak-Cisak, Malgorzata; Kwasnowski, Pawel; Furtak, Marcin; Hayduk, Grzegorz

2017-10-01

Experimental buildings for “in situ” research are a very important tool for collecting data on energy efficiency of the energy-saving technologies. One of the most advanced building of this type in Poland is the Maloposkie Laboratory of Energy-saving Buildings at Cracow University of Technology. The building itself is used by scientists as a research object and research tool to test energy-saving technologies. It is equipped with a specialized measuring system consisting of approx. 3 000 different sensors distributed in technical installations and structural elements of the building (walls, ceilings, cornices) and the ground. The authors of the paper will present the innovative design and technology of this specialized instrumentation. They will discuss issues arising during the implementation and use of the building.

Introduction of Building Information Modeling (BIM) Technologies in Construction

NASA Astrophysics Data System (ADS)

Milyutina, M. A.

2018-05-01

The issues of introduction of building information modeling (BIM) in construction industry are considered in this work. The advantages of this approach and perspectives of the transition to new design technologies, construction process management, and operation in the near future are stated. The importance of development of pilot projects that should identify the ways and means of verification of the regulatory and technical base, as well as economic indicators in the transition to Building Information Technologies in the construction, is noted.

VLT/I Instrumentation: Lessons Learned FORUM

NASA Astrophysics Data System (ADS)

Monnet, G.; Bacon, R.

2003-09-01

This paper is the result of a joint effort by ESO and its Scientific and Technical Committee (STC) to extract the main lessons from last April's 'VLT/VLTI Instrumentation: Lessons learned' Forum and start applying them, in particular in the framework of the development of second generation VLT -and soon VLTI- instruments. This is but one step in a continuing effort to optimize these complex and challenging developments which involve a significant fraction of Europe's astronomical instrument builders in the near-UV to mid-IR range. With a major effort in the European radio community to build multiple receiver systems for ALMA now being pursued at an accelerated pace, it was also vital to revisit very quickly our whole procurement strategy in this area.

A framework for mobilizing communities to advance local tobacco control policy: the Los Angeles County experience.

PubMed

Weber, Mark D; Simon, Paul; Messex, Monty; Aragon, Linda; Kuo, Tony; Fielding, Jonathan E

2012-05-01

The Los Angeles County Tobacco Control and Prevention Program was significantly restructured in 2004 to improve capacity for local policy adoption. Restructuring included creating a fully staffed and trained policy unit; partnering with state-funded tobacco control organizations to provide high-quality, continuous technical assistance and training; implementing a highly structured policy adoption approach; expanding community capacity building; and establishing local coalitions to mobilize communities. Over the ensuing 6 years (2004-2010), 97 tobacco control policies were enacted in the county's 88 cities and unincorporated area, including 79 that were attributable to the program. By comparison, only 15 policies were enacted from 1998 to 2003. Expanding policy adoption capacity through program restructuring may be achievable in other local jurisdictions.

Insights on STEM Careers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wendelberger, Joanne Roth

2014-11-05

This presentation will provide career advice for individuals seeking to go beyond just having a job to building a successful career in the areas of Science, Technology, Engineering, and Mathematics. Careful planning can be used to turn a job into a springboard for professional advancement and personal satisfaction. Topics to be addressed include setting priorities, understanding career ladders, making tough choices, overcoming stereotypes and assumptions by others, networking, developing a professional identify, and balancing a career with family and other personal responsibilities. Insights on the transition from individual technical work to leadership will also be provided. The author will drawmore » upon experiences gained in academic, industrial, and government laboratory settings, as well as extensive professional service and community involvement.« less

Resilience of sewage services to climate change uncertainty: analysis of the management of sewer overflows in two Parisian suburban areas.

NASA Astrophysics Data System (ADS)

Rioust, E.; Deroubaix, J. F.; Barroca, B.; Bonierbale, T.; de Gouvello, B.; Deutsch, J. C.; Hubert, G.

2009-04-01

This paper considers the resilience perspective as an approach for understanding social and political vulnerabilities of urban services. The authors examine to what extend uncertainty due to climate change may affect the resilience of these urban services. The resilience perspective is increasingly used for analysing social groups' capacities to adapt to and live with disturbances. A lot of work on resilience has focused on the capacity to absorb shocks and still maintain functions. But there is also another aspect of resilience, which leads to take into account systems vulnerabilities and to aim at understanding their equilibrium and re-organization capacity. The purpose with this paper is to assess sewage systems capacities to adapt to climate change. Indeed, climate change could cause an increase of extreme rain events and, as a matter of consequence, an increase of sewer overflows and flooding of urbanised areas. Sewer systems have to cope with this change that may gravely affect urban planning. In recent studies of political science, risk management has been considered as a public policy involving and resulting from complex social, political and technical processes (Gilbert et al. 2003). From this point of view, the management of wastewaters and storm waters has to be considered not only as a technical but also as a political and a social system. Therefore, political science can be a fruitful perspective to understand the stakeholders perceptions of uncertainty and the way they are going to integrate this issue in their practices. The authors analyse the adaptive capacities of two sewer systems located in the Parisian suburban area. The chosen areas are highly populated. Each network is managed within a political and administrative unit called "Département". Both authorities of these "Départements" implement a public sewage service. Nonetheless these networks are connected and part of the greater Paris sewage policy. In both areas a real time control of urban wastewater systems has been developed. At last, both sewage services have make flood management their prior objective. Both "Départements" have developed retention capacities. One of them has implemented a source control strategy including daywatering while the other one has intent on building up a "culture of risk" on the territory. In this paper we compare how these social and technical systems cope with risks and face to climate change. Relying on interviews conducted with engineers and technical agents of water and sewage services and with a few residents in the concerned areas, we define three types of actors who take part to the social and technical systems. There are, on the one hand, the technical actors, including the agents currently managing the sewer network. On the other hand, there are the political actors in charge of elaborating and implementing a policy of risk prevention and managing the security force. Last but not least, there are the inhabitants who take an important part in the crisis management and in the mobilisations against the existing risk policy. The first part of the paper describes the sewage systems while there is no crisis. We explicit the actors' perceptions of risk and the risk management strategies they develop. The risk perceptions of technicians are truly different than the citizens' ones. For the technicians, floods, and their possible worsening, could be controlled. The problem is generated by the increasing impervious areas but it can be solved with technologies (real time control, best management practices and compensatory measures). In the technicians' perceptions, the risk is inherent to technical failures and can be reduced. For citizens, the concern is more for economics and personal goods losses. However both types of actors deal with the matter of submerged territories as a problem of institutional inertia (lack of financial resource, problem of governance). The second part presents the crisis management in these areas. We explain how various actors cope with flood when the risk occurs. The analysis of the actors' reaction to the flood event contributes (1) to further characterise the social and political system dealing with the flooding risk and, (2) to assess the adaptive capacities of the technicians to the risk. The crisis moment gives a specific role for each actor of the social, political and technical systems. Technical actors manage natural hazard through the remote control system and their major concern is for network disruption. Once flood has occurred, they may assist residents cleaning out public space. Nonetheless, after the crisis, the technical actors are seen by the others as the responsible for the flood. They are considered as the ones in charge of preventing the future flood event, even if they claim that they cannot protect urban areas and population up to a determined risk threshold. Neither technicians nor other actor settle the question of urban planning or existing vulnerability of the flooded areas.

ISO 50001 for Commercial Buildings: Lessons Learned From U.S. DOE Pilot Project: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deru, M.; Field, K.; Punjabi, S.

In the U.S., the ISO 50001 Standard, which establishes energy management systems (EnMSs) and processes, has shown uptake primarily in the industrial sector. The U.S. Department of Energy (DOE) undertook a pilot program to explore ISO 50001 implementation in commercial buildings. Eight organizations participated as pilots, with technical assistance provided by DOE, the National Renewable Energy Laboratory (NREL), the Lawrence Berkeley National Laboratory (LBNL), and the Georgia Institute of Technology (Georgia Tech). This paper shares important lessons learned from the pilot. Staff time was the most critical resource required to establish effective EnMSs in commercial buildings. The pilot also revealedmore » that technical support and template/example materials were essential inputs. Crucial activities included evaluating performance, identifying goals, making connections, communicating operational controls, and tracking/reviewing progress. Benefits realized included enhanced intra-organizational connections, greater energy awareness, increased process efficiencies, and improved ability to make business cases. Incremental benefits for ISO 50001 certification were greater accountability, assurance of best practices, public relations opportunities, and potential to unlock verified savings credits or incentive money. Incremental certification costs included more staff/consultant time, money for certification, and a tendency to limit EnMS scope in order to ensure favorable audit results. Five best practices were identified - utilizing expert technical assistance, training, and other resources; focusing on implementation over documentation; keeping top management involved; considering organizational structure when selecting EnMS scope; and matching the implementation level to an EnMS's scope and scale. The last two practices are particularly relevant to the commercial buildings sector.« less

3. View from missile site control building (southeast to northwest) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. View from missile site control building (southeast to northwest) of missile launch area showing universal missile building on left and warhead handling building in background. - Stanley R. Mickelsen Safeguard Complex, Missile Launch Area, Within Exclusion Area, Nekoma, Cavalier County, ND

[The visual perception of the elements of technical drawings among masking distractions in advanced and nonadvanced students in the building and architectural professions].

PubMed

Balichev, Iu

1997-01-01

To investigation were submitted the particularities of the process of visual perception of technical drawings and schemes in advanced and backward pupils, who were mastering the specialties of "building and architecture", "hydroconstruction", "transport construction", "geodesy". The time was registered, which was necessary to advanced and backward pupils for unveiling the different elements in the drawing, scheme, and such attributes of the drawing as: orientation, length, curves of the lined, the boundary between them; time for identification of the specific designations, symbols, group of symbols, elements of the sketch from the simple to the complex ones. The results of the investigations revealed that in the advanced pupils the perception (unveiling) of the different elements of the technical drawing proceeded very rapidly, almost automatically. In the backward pupils this process elapsed reliably more slowly. It was demonstrated that the growing up pupils, who were distinguished with more rapid perception of the different elements of the drawing (advanced ones) more rapidly and more exactly dealt with solution of the technical tasks as compared with these, who more slowly unveiled the looked for elements (backwardness). Some other individual particularities were also established with respect to the visual perception of the elements of the technical drawing and its properties in advanced and backward pupils who were mastering the investigated professions.