Ontology-Driven Information Integration

NASA Technical Reports Server (NTRS)

Tissot, Florence; Menzel, Chris

2005-01-01

Ontology-driven information integration (ODII) is a method of computerized, automated sharing of information among specialists who have expertise in different domains and who are members of subdivisions of a large, complex enterprise (e.g., an engineering project, a government agency, or a business). In ODII, one uses rigorous mathematical techniques to develop computational models of engineering and/or business information and processes. These models are then used to develop software tools that support the reliable processing and exchange of information among the subdivisions of this enterprise or between this enterprise and other enterprises.

Separating Business Logic from Medical Knowledge in Digital Clinical Workflows Using Business Process Model and Notation and Arden Syntax.

PubMed

de Bruin, Jeroen S; Adlassnig, Klaus-Peter; Leitich, Harald; Rappelsberger, Andrea

2018-01-01

Evidence-based clinical guidelines have a major positive effect on the physician's decision-making process. Computer-executable clinical guidelines allow for automated guideline marshalling during a clinical diagnostic process, thus improving the decision-making process. Implementation of a digital clinical guideline for the prevention of mother-to-child transmission of hepatitis B as a computerized workflow, thereby separating business logic from medical knowledge and decision-making. We used the Business Process Model and Notation language system Activiti for business logic and workflow modeling. Medical decision-making was performed by an Arden-Syntax-based medical rule engine, which is part of the ARDENSUITE software. We succeeded in creating an electronic clinical workflow for the prevention of mother-to-child transmission of hepatitis B, where institution-specific medical decision-making processes could be adapted without modifying the workflow business logic. Separation of business logic and medical decision-making results in more easily reusable electronic clinical workflows.

Engineering the Business of Defense Acquisition: An Analysis of Program Office Processes

DTIC Science & Technology

2015-05-01

Information Technology and Business Process Redesign | MIT Sloan Management Review . MIT Sloan Management Review . Retrieved from http://sloanreview.mit.edu...links systems management to process execution Three Phases/ Multi-Year Effort (This Phase) Literature review Model development— Formal and...estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining

Examination of Modeling Languages to Allow Quantitative Analysis for Model-Based Systems Engineering

DTIC Science & Technology

2014-06-01

x THIS PAGE INTENTIONALLY LEFT BLANK xi LIST OF ACRONYMS AND ABBREVIATIONS BOM Base Object Model BPMN Business Process Model & Notation DOD...SysML. There are many variants such as the Unified Profile for DODAF/MODAF (UPDM) and Business Process Model & Notation ( BPMN ) that have origins in

The Institute for Software Engineering.

ERIC Educational Resources Information Center

Inselbert, Armond

1982-01-01

The Institute for Software Engineering, a data processing education, publishing and consulting organization with offices and members worldwide, is described. The goal of the Institute is to assist data processing management and staff in providing the service levels required to support an organization's business needs. (Author/MLW)

The Role of Industry in Minority Engineering Programs.

ERIC Educational Resources Information Center

Branigan, Thomas L.

Until recently, U.S. engineering education and American industry drew candidates from only about 43 percent of the potential market--white males. Many segments of American business, education, and government have been involved in a process to increase minority participation in engineering; the 1974 freshmen engineering enrollment for women…

Concurrent Software Engineering Project

ERIC Educational Resources Information Center

Stankovic, Nenad; Tillo, Tammam

2009-01-01

Concurrent engineering or overlapping activities is a business strategy for schedule compression on large development projects. Design parameters and tasks from every aspect of a product's development process and their interdependencies are overlapped and worked on in parallel. Concurrent engineering suffers from negative effects such as excessive…

Use of New and Minority-Owned Architectural and Engineering Firms by Selected Army and Navy Activities.

DTIC Science & Technology

1981-10-30

we directed our review to the preselection and selection processes for direct A/E awards,.not awards made under the Small Business Administration’s 8...policy of the United States that small busi - ness concerns and small business concerns owned and controlled by socially and economically disadvantaged...contracts exceeding $10,000 must contain the above state- ment. The Small Business Administration has defined small business concerns for A/E services

Systems thinking: what business modeling can do for public health.

PubMed

Williams, Warren; Lyalin, David; Wingo, Phyllis A

2005-01-01

Today's public health programs are complex business systems with multiple levels of collaborating federal, state, and local entities. The use of proven systems engineering modeling techniques to analyze, align, and streamline public health operations is in the beginning stages. The authors review the initial business modeling efforts in immunization and cancer registries and present a case to broadly apply business modeling approaches to analyze and improve public health processes.

CrossTalk: The Journal of Defense Software Engineering. Volume 21, Number 10, October 2008

DTIC Science & Technology

2008-10-01

proprietary modeling offerings, there is considerable conver- gence around Business Process Modeling Notation ( BPMN ). The research also found strong...support across vendors for the Business Process Execution Language standard, though there is also emerging support for direct execution of BPMN through...the use of the XML Process Definition Language, an XML serialization of BPMN . Many vendors also provide the needed moni- toring of those processes at

Utilization of a Multi-Disciplinary Approach to Building Effective Command Centers: Process and Products

DTIC Science & Technology

2005-06-01

cognitive task analysis , organizational information dissemination and interaction, systems engineering, collaboration and communications processes, decision-making processes, and data collection and organization. By blending these diverse disciplines command centers can be designed to support decision-making, cognitive analysis, information technology, and the human factors engineering aspects of Command and Control (C2). This model can then be used as a baseline when dealing with work in areas of business processes, workflow engineering, information management,

Team-Based Development of Medical Devices: An Engineering-Business Collaborative.

PubMed

Eberhardt, Alan W; Johnson, Ophelia L; Kirkland, William B; Dobbs, Joel H; Moradi, Lee G

2016-07-01

There is a global shift in the teaching methodology of science and engineering toward multidisciplinary, team-based processes. To meet the demands of an evolving technical industry and lead the way in engineering education, innovative curricula are essential. This paper describes the development of multidisciplinary, team-based learning environments in undergraduate and graduate engineering curricula focused on medical device design. In these programs, students actively collaborate with clinicians, professional engineers, business professionals, and their peers to develop innovative solutions to real-world problems. In the undergraduate senior capstone courses, teams of biomedical engineering (BME) and business students have produced and delivered numerous functional prototypes to satisfied clients. Pursuit of commercialization of devices has led to intellectual property (IP) disclosures and patents. Assessments have indicated high levels of success in attainment of student learning outcomes and student satisfaction with their undergraduate design experience. To advance these projects toward commercialization and further promote innovative team-based learning, a Master of Engineering (MEng) in Design and Commercialization was recently launched. The MEng facilitates teams of graduate students in engineering, life sciences, and business who engage in innovation-commercialization (IC) projects and coursework that take innovative ideas through research and development (R&D) to create marketable devices. The activities are structured with students working together as a "virtual company," with targeted outcomes of commercialization (license agreements and new start-ups), competitive job placement, and/or career advancement.

Information Systems and Software Engineering Research and Education in Oulu until the 1990s

NASA Astrophysics Data System (ADS)

Oinas-Kukkonen, Henry; Kerola, Pentti; Oinas-Kukkonen, Harri; Similä, Jouni; Pulli, Petri

This paper discusses the internationalization of software business in the Oulu region. Despite its small size, the region grew rapidly and very successfully into a global information and communication technology business center. The University of Oulu, which was the northern most university in the world at the time of its establishment (1958) had a strong emphasis on engineering since its very beginning. Research on electronics was carried out since the early 1960s. Later, when the Department of Information Processing Science was founded in 1969, research on information systems and later also on software engineering was carried out. This paper discusses the role of the information systems and software engineering research for the business growth of the region. Special emphasis is put on understanding the role of system-theoretical and software development expertise for transferring research knowledge into practice.

Operational concepts and implementation strategies for the design configuration management process.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trauth, Sharon Lee

2007-05-01

This report describes operational concepts and implementation strategies for the Design Configuration Management Process (DCMP). It presents a process-based systems engineering model for the successful configuration management of the products generated during the operation of the design organization as a business entity. The DCMP model focuses on Pro/E and associated activities and information. It can serve as the framework for interconnecting all essential aspects of the product design business. A design operation scenario offers a sense of how to do business at a time when DCMP is second nature within the design organization.

Team-Based Development of Medical Devices: An Engineering–Business Collaborative

PubMed Central

Eberhardt, Alan W.; Johnson, Ophelia L.; Kirkland, William B.; Dobbs, Joel H.; Moradi, Lee G.

2016-01-01

There is a global shift in the teaching methodology of science and engineering toward multidisciplinary, team-based processes. To meet the demands of an evolving technical industry and lead the way in engineering education, innovative curricula are essential. This paper describes the development of multidisciplinary, team-based learning environments in undergraduate and graduate engineering curricula focused on medical device design. In these programs, students actively collaborate with clinicians, professional engineers, business professionals, and their peers to develop innovative solutions to real-world problems. In the undergraduate senior capstone courses, teams of biomedical engineering (BME) and business students have produced and delivered numerous functional prototypes to satisfied clients. Pursuit of commercialization of devices has led to intellectual property (IP) disclosures and patents. Assessments have indicated high levels of success in attainment of student learning outcomes and student satisfaction with their undergraduate design experience. To advance these projects toward commercialization and further promote innovative team-based learning, a Master of Engineering (MEng) in Design and Commercialization was recently launched. The MEng facilitates teams of graduate students in engineering, life sciences, and business who engage in innovation-commercialization (IC) projects and coursework that take innovative ideas through research and development (R&D) to create marketable devices. The activities are structured with students working together as a “virtual company,” with targeted outcomes of commercialization (license agreements and new start-ups), competitive job placement, and/or career advancement. PMID:26902869

OGC Dashboard

EPA Pesticide Factsheets

The Office of General Counsel (OGC) has an ongoing business process engineering and business process automation initiative which has helped the office reduce administrative labor costs while increasing employee effectiveness. Supporting this effort is a system of automated routines accessible through a portal' interface called OGC Dashboard. The dashboard helps OGC track work progress, legal case load, written work products such as legal briefs and advice, and scheduling processes such as employee leave plans (via calendar) and travel compensatory time off.

Foreign Outsourcing of the U.S. Electronics Industry

DTIC Science & Technology

1993-04-01

There is also great concern over the success of Japan and the "Asian Tigers" (Hong Kong, Korea, Malaysia , Singapore, and Taiwan) in capturing market share...Quality Management), JIT (Just In Time) inventory, MRP (Manufacturing Resources Planning), BPR (Business Process Reengineering), and EI ( Employee ...planning, business process re-engineering, employee empowering, just to name a few. All these techniques look to address the requirement to remain

Business process re-engineering in the logistics industry: a study of implementation, success factors, and performance

NASA Astrophysics Data System (ADS)

Shen, Chien-wen; Chou, Ching-Chih

2010-02-01

As business process re-engineering (BPR) is an important foundation to ensure the success of enterprise systems, this study would like to investigate the relationships among BPR implementation, BPR success factors, and business performance for logistics companies. Our empirical findings show that BPR companies outperformed non-BPR companies, not only on information processing, technology applications, organisational structure, and co-ordination, but also on all of the major logistics operations. Comparing the different perceptions of the success factors for BPR, non-BPR companies place greater emphasis on the importance of employee involvement while BPR companies are more concerned about the influence of risk management. Our findings also suggest that management attitude towards BPR success factors could affect performance with regard to technology applications and logistics operations. Logistics companies which have not yet implemented the BPR approach could refer to our findings to evaluate the advantages of such an undertaking and to take care of those BPR success factors affecting performance before conducting BPR projects.

ROI on yield data analysis systems through a business process management strategy

NASA Astrophysics Data System (ADS)

Rehani, Manu; Strader, Nathan; Hanson, Jeff

2005-05-01

The overriding motivation for yield engineering is profitability. This is achieved through application of yield management. The first application is to continually reduce waste in the form of yield loss. New products, new technologies and the dynamic state of the process and equipment keep introducing new ways to cause yield loss. In response, the yield management efforts have to continually come up with new solutions to minimize it. The second application of yield engineering is to aid in accurate product pricing. This is achieved through predicting future results of the yield engineering effort. The more accurate the yield prediction, the more accurate the wafer start volume, the more accurate the wafer pricing. Another aspect of yield prediction pertains to gauging the impact of a yield problem and predicting how long that will last. The ability to predict such impacts again feeds into wafer start calculations and wafer pricing. The question then is that if the stakes on yield management are so high why is it that most yield management efforts are run like science and engineering projects and less like manufacturing? In the eighties manufacturing put the theory of constraints1 into practice and put a premium on stability and predictability in manufacturing activities, why can't the same be done for yield management activities? This line of introspection led us to define and implement a business process to manage the yield engineering activities. We analyzed the best known methods (BKM) and deployed a workflow tool to make them the standard operating procedure (SOP) for yield managment. We present a case study in deploying a Business Process Management solution for Semiconductor Yield Engineering in a high-mix ASIC environment. We will present a description of the situation prior to deployment, a window into the development process and a valuation of the benefits.

Systems Engineering Applications for Small Business Innovative Research (SBIR) Projects

DTIC Science & Technology

2012-09-01

7 2. DAG Processes and Roles of the PM and SE................................................................8 3. DAG SE Processes...also defines the role of the Program Manager and Chief Engineer illustrated in figure 2 below. The DAG also separates the above 16 SE processes...into two areas shown in figure 3. Table 2: DAG Processes and Roles of the PM and SE (DAG Table 4.1.1T1, 2012) 9 Table 3: DAG SE Processes (DAG

Army Information Technology Procurement: A Business Process Analysis

DTIC Science & Technology

2015-03-27

unrestricted access to the Land War Net when necessary. The Corps of Engineers has IT systems floating next to a dam this week, and next week it will...time available to complete the research; 9 limited access to stakeholders, and SMEs; limited authority to implement business process improvement...Reservists, National Guard, and Medical Corps all maintain their own independent networks, but require unrestricted access to the Land War Net when

49 CFR Appendix B to Part 512 - General Class Determinations

Code of Federal Regulations, 2012 CFR

2012-10-01

... SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CONFIDENTIAL BUSINESS INFORMATION Pt. 512, App. B... disclosed to the public: (1) Blueprints and engineering drawings containing process and production data where the subject could not be manufactured without the blueprints or engineering drawings except after...

49 CFR Appendix B to Part 512 - General Class Determinations

Code of Federal Regulations, 2014 CFR

2014-10-01

... SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CONFIDENTIAL BUSINESS INFORMATION Pt. 512, App. B... disclosed to the public: (1) Blueprints and engineering drawings containing process and production data where the subject could not be manufactured without the blueprints or engineering drawings except after...

Applying Modeling Tools to Ground System Procedures

NASA Technical Reports Server (NTRS)

Di Pasquale, Peter

2012-01-01

As part of a long-term effort to revitalize the Ground Systems (GS) Engineering Section practices, Systems Modeling Language (SysML) and Business Process Model and Notation (BPMN) have been used to model existing GS products and the procedures GS engineers use to produce them.

Virtually Out of This World!

NASA Technical Reports Server (NTRS)

2002-01-01

Ames Research Center granted Reality Capture Technologies (RCT), Inc., a license to further develop NASA's Mars Map software platform. The company incorporated NASA#s innovation into software that uses the Virtual Plant Model (VPM)(TM) to structure, modify, and implement the construction sites of industrial facilities, as well as develop, validate, and train operators on procedures. The VPM orchestrates the exchange of information between engineering, production, and business transaction systems. This enables users to simulate, control, and optimize work processes while increasing the reliability of critical business decisions. Engineers can complete the construction process and test various aspects of it in virtual reality before building the actual structure. With virtual access to and simulation of the construction site, project personnel can manage, access control, and respond to changes on complex constructions more effectively. Engineers can also create operating procedures, training, and documentation. Virtual Plant Model(TM) is a trademark of Reality Capture Technologies, Inc.

Integrated system for automated financial document processing

NASA Astrophysics Data System (ADS)

Hassanein, Khaled S.; Wesolkowski, Slawo; Higgins, Ray; Crabtree, Ralph; Peng, Antai

1997-02-01

A system was developed that integrates intelligent document analysis with multiple character/numeral recognition engines in order to achieve high accuracy automated financial document processing. In this system, images are accepted in both their grayscale and binary formats. A document analysis module starts by extracting essential features from the document to help identify its type (e.g. personal check, business check, etc.). These features are also utilized to conduct a full analysis of the image to determine the location of interesting zones such as the courtesy amount and the legal amount. These fields are then made available to several recognition knowledge sources such as courtesy amount recognition engines and legal amount recognition engines through a blackboard architecture. This architecture allows all the available knowledge sources to contribute incrementally and opportunistically to the solution of the given recognition query. Performance results on a test set of machine printed business checks using the integrated system are also reported.

Using CASE to Exploit Process Modeling in Technology Transfer

NASA Technical Reports Server (NTRS)

Renz-Olar, Cheryl

2003-01-01

A successful business will be one that has processes in place to run that business. Creating processes, reengineering processes, and continually improving processes can be accomplished through extensive modeling. Casewise(R) Corporate Modeler(TM) CASE is a computer aided software engineering tool that will enable the Technology Transfer Department (TT) at NASA Marshall Space Flight Center (MSFC) to capture these abilities. After successful implementation of CASE, it could then go on to be applied in other departments at MSFC and other centers at NASA. The success of a business process is dependent upon the players working as a team and continuously improving the process. A good process fosters customer satisfaction as well as internal satisfaction in the organizational infrastructure. CASE provides a method for business process success through functions consisting of systems and processes business models; specialized diagrams; matrix management; simulation; report generation and publishing; and, linking, importing, and exporting documents and files. The software has an underlying repository or database to support these functions. The Casewise. manual informs us that dynamics modeling is a technique used in business design and analysis. Feedback is used as a tool for the end users and generates different ways of dealing with the process. Feedback on this project resulted from collection of issues through a systems analyst interface approach of interviews with process coordinators and Technical Points of Contact (TPOCs).

A network-oriented business modeling environment

NASA Astrophysics Data System (ADS)

Bisconti, Cristian; Storelli, Davide; Totaro, Salvatore; Arigliano, Francesco; Savarino, Vincenzo; Vicari, Claudia

The development of formal models related to the organizational aspects of an enterprise is fundamental when these aspects must be re-engineered and digitalized, especially when the enterprise is involved in the dynamics and value flows of a business network. Business modeling provides an opportunity to synthesize and make business processes, business rules and the structural aspects of an organization explicit, allowing business managers to control their complexity and guide an enterprise through effective decisional and strategic activities. This chapter discusses the main results of the TEKNE project in terms of software components that enable enterprises to configure, store, search and share models of any aspects of their business while leveraging standard and business-oriented technologies and languages to bridge the gap between the world of business people and IT experts and to foster effective business-to-business collaborations.

Alternative Dispute Resolution in the Construction Process: A Course of Study for Construction Managers

DTIC Science & Technology

1988-11-22

focus on ADR education, and provide a sampling of how law and business schools are presenting the topics. The course syllabus is presented in Chapter...course. ADR education has taken hold in many law and business schools , but the topic has yet to gain the attention of engineering educators. This chapter

Teaching business ethics to professional engineers.

PubMed

Sauser, William I

2004-04-01

Without question "business ethics" is one of the hot topics of the day. Over the past months we have seen business after business charged with improper practices that violate commonly-accepted ethical norms. This has led to a loss of confidence in corporate management, and has had severe economic consequences. From many quarters business educators have heard the call to put more emphasis on ethical practices in their business courses and curricula. Engineering educators are also heeding this call, since the practice of engineering usually involves working for (or leading) a business and/or engaging in business transactions. In the summer of 2002, Auburn University's Engineering Professional Development program made the decision to produce--based on the author's Executive MBA course in Business Ethics--a distance-delivered continuing education program for professional engineers and surveyors. Participants across the USA now may use the course to satisfy continuing education requirements with respect to professional licensing and certification. This paper outlines the purpose and content of the course and describes its production, distribution, application, and evaluation.

Integration Framework of Process Planning based on Resource Independent Operation Summary to Support Collaborative Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kulvatunyou, Boonserm; Wysk, Richard A.; Cho, Hyunbo

2004-06-01

In today's global manufacturing environment, manufacturing functions are distributed as never before. Design, engineering, fabrication, and assembly of new products are done routinely in many different enterprises scattered around the world. Successful business transactions require the sharing of design and engineering data on an unprecedented scale. This paper describes a framework that facilitates the collaboration of engineering tasks, particularly process planning and analysis, to support such globalized manufacturing activities. The information models of data and the software components that integrate those information models are described. The integration framework uses an Integrated Product and Process Data (IPPD) representation called a Resourcemore » Independent Operation Summary (RIOS) to facilitate the communication of business and manufacturing requirements. Hierarchical process modeling, process planning decomposition and an augmented AND/OR directed graph are used in this representation. The Resource Specific Process Planning (RSPP) module assigns required equipment and tools, selects process parameters, and determines manufacturing costs based on two-level hierarchical RIOS data. The shop floor knowledge (resource and process knowledge) and a hybrid approach (heuristic and linear programming) to linearize the AND/OR graph provide the basis for the planning. Finally, a prototype system is developed and demonstrated with an exemplary part. Java and XML (Extensible Markup Language) are used to ensure software and information portability.« less

Engineering Change Management Method Framework in Mechanical Engineering

NASA Astrophysics Data System (ADS)

Stekolschik, Alexander

2016-11-01

Engineering changes make an impact on different process chains in and outside the company, and lead to most error costs and time shifts. In fact, 30 to 50 per cent of development costs result from technical changes. Controlling engineering change processes can help us to avoid errors and risks, and contribute to cost optimization and a shorter time to market. This paper presents a method framework for controlling engineering changes at mechanical engineering companies. The developed classification of engineering changes and accordingly process requirements build the basis for the method framework. The developed method framework comprises two main areas: special data objects managed in different engineering IT tools and process framework. Objects from both areas are building blocks that can be selected to the overall business process based on the engineering process type and change classification. The process framework contains steps for the creation of change objects (both for overall change and for parts), change implementation, and release. Companies can select singleprocess building blocks from the framework, depending on the product development process and change impact. The developed change framework has been implemented at a division (10,000 employees) of a big German mechanical engineering company.

Process Materialization Using Templates and Rules to Design Flexible Process Models

NASA Astrophysics Data System (ADS)

Kumar, Akhil; Yao, Wen

The main idea in this paper is to show how flexible processes can be designed by combining generic process templates and business rules. We instantiate a process by applying rules to specific case data, and running a materialization algorithm. The customized process instance is then executed in an existing workflow engine. We present an architecture and also give an algorithm for process materialization. The rules are written in a logic-based language like Prolog. Our focus is on capturing deeper process knowledge and achieving a holistic approach to robust process design that encompasses control flow, resources and data, as well as makes it easier to accommodate changes to business policy.

2007 Mississippi Curriculum Framework: Postsecondary Small Engine and Turf Equipment Repair Technology. (Program CIP: 01.0299 Agricultural Mechanization, Other )

ERIC Educational Resources Information Center

Spence, Allen; Campus, Raymond

2007-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Ontology-Driven Business Modelling: Improving the Conceptual Representation of the REA Ontology

NASA Astrophysics Data System (ADS)

Gailly, Frederik; Poels, Geert

Business modelling research is increasingly interested in exploring how domain ontologies can be used as reference models for business models. The Resource Event Agent (REA) ontology is a primary candidate for ontology-driven modelling of business processes because the REA point of view on business reality is close to the conceptual modelling perspective on business models. In this paper Ontology Engineering principles are employed to reengineer REA in order to make it more suitable for ontology-driven business modelling. The new conceptual representation of REA that we propose uses a single representation formalism, includes a more complete domain axiomatizat-ion (containing definitions of concepts, concept relations and ontological axioms), and is proposed as a generic model that can be instantiated to create valid business models. The effects of these proposed improvements on REA-driven business modelling are demonstrated using a business modelling example.

Digital Image Processing in Private Industry.

ERIC Educational Resources Information Center

Moore, Connie

1986-01-01

Examines various types of private industry optical disk installations in terms of business requirements for digital image systems in five areas: records management; transaction processing; engineering/manufacturing; information distribution; and office automation. Approaches for implementing image systems are addressed as well as key success…

Training Guide for the Management Analyst Industrial Engineer Technician

DTIC Science & Technology

1979-07-01

comtemporary work operations, and blending traditional and modern organization concepts, the student devwlops the facility to analyze and create organization...training, the attendee will know the functions of a computer as it processes business data to produce information for improved management. He will...action which is most cost effective when considering proposed investments. Emphasis is placed on the adaption of general business practices to

CMMI (registered trademark) for Services, Version 1.2

DTIC Science & Technology

2009-02-01

background in information technology, especially those familiar with disciplines like service - oriented architecture (SOA) or software as a service ( SaaS ). In... services , the Software Engineering Institute (SEI) has found several dimensions that an organization can focus on to improve its business. Figure...International Business Machines) and the SEI [Humphrey 1989]. Humphrey’s book, Managing the Software Process, provides a CMMI for Services Version 1.2

Engineering the Business of Defense Acquisition: An Analysis of Program Office Processes

DTIC Science & Technology

2015-04-30

ability to stay focused on the decision outcome rather than procrastinate and wait for a time- dependent resolution. Another critical aspect of...instituted an effective issue resolution process. Conflict, left unmanaged, tended to result in further procrastination and less effective outcomes

Business process study simulation for resource management in an emergency department.

PubMed

Poomkothammal, Velusamy

2006-01-01

Alexandra Hospital conducted a business process reengineering exercise for all its main processes in order to further improve on their efficiencies with the ultimate aim to provide a higher level of services to patients. The goal of the DEM is to manage an anticipated increase in the volume of patients without much increase in resources. As a start, the Department of Emergency (DEM) medicine studied its AS-IS process and has designed and implemented the new TO-BE process. As part of this continuous improvement effort, staff from Nanyang Polytechnic (NYP) has been assigned the task of applying engineering and analytical techniques to simulate the new process. The simulations were conducted to show on process management and resource planning.

Mobile Device Management in the DOD Enterprise Network: Factors for Risk Management, Integration, and It Acquisition

DTIC Science & Technology

2013-03-01

Business Engineering, Liu et al. (2010) presented research demonstrating that businesses are increasingly over tasked to manage the growing equipment...Android, and Research in Motion’s BlackBerry ). Monitoring mission-critical applications for updates and compatibility is crucial to ensure...private sector has seen the CIO’s role increase into C- level leadership, growing from initial responsibilities of overseeing data processing, then 31

Defense Acquisition Workforce: Actions Needed to Guide Planning Efforts and Improve Workforce Capability

DTIC Science & Technology

2015-12-01

positions. However, 6 of the 13 acquisition career fields, including 3 priority career fields—contracting, business and engineering—did not meet growth...the competency assessment process and challenges. The leaders we interviewed were from the business ; program management; contracting; engineering...Complete Assessments to Improve Future Civilian Strategic Workforce Plans, GAO-12- 1014 (Washington, D.C.: September 27, 2012). 5GAO, High-Risk Series: An

Science and Technology in Development Environments - Industry and Department of Defense Case Studies

DTIC Science & Technology

2003-11-01

an acronym for Product and Cycle Time Excellence, is designed to manage product development , business development , and business alliance processes...experiments. 3. Test Practicality—Pilot development with limited production. 4. Prove Profitability—Pilot production. 5. Manage Life Cycle —Manufacturing and...compressor, particularly in a turbofan configuration, was developed primarily under a CIP for these two engines. The TF30 and F100 experiences provide

New Method for Knowledge Management Focused on Communication Pattern in Product Development

NASA Astrophysics Data System (ADS)

Noguchi, Takashi; Shiba, Hajime

In the field of manufacturing, the importance of utilizing knowledge and know-how has been growing. To meet this background, there is a need for new methods to efficiently accumulate and extract effective knowledge and know-how. To facilitate the extraction of knowledge and know-how needed by engineers, we first defined business process information which includes schedule/progress information, document data, information about communication among parties concerned, and information which corresponds to these three types of information. Based on our definitions, we proposed an IT system (FlexPIM: Flexible and collaborative Process Information Management) to register and accumulate business process information with the least effort. In order to efficiently extract effective information from huge volumes of accumulated business process information, focusing attention on “actions” and communication patterns, we propose a new extraction method using communication patterns. And the validity of this method has been verified for some communication patterns.

Knowledge management in the engineering design environment

NASA Technical Reports Server (NTRS)

Briggs, Hugh C.

2006-01-01

The Aerospace and Defense industry is experiencing an increasing loss of knowledge through workforce reductions associated with business consolidation and retirement of senior personnel. Significant effort is being placed on process definition as part of ISO certification and, more recently, CMMI certification. The process knowledge in these efforts represents the simplest of engineering knowledge and many organizations are trying to get senior engineers to write more significant guidelines, best practices and design manuals. A new generation of design software, known as Product Lifecycle Management systems, has many mechanisms for capturing and deploying a wider variety of engineering knowledge than simple process definitions. These hold the promise of significant improvements through reuse of prior designs, codification of practices in workflows, and placement of detailed how-tos at the point of application.

Dealing with complex and ill-structured problems: results of a Plan-Do-Check-Act experiment in a business engineering semester

NASA Astrophysics Data System (ADS)

Riis, Jens Ove; Achenbach, Marlies; Israelsen, Poul; Kyvsgaard Hansen, Poul; Johansen, John; Deuse, Jochen

2017-07-01

Challenged by increased globalisation and fast technological development, we carried out an experiment in the third semester of a global business engineering programme aimed at identifying conditions for training student in dealing with complex and ill-structured problems of forming a new business. As this includes a fuzzy front end, learning cannot be measured in traditional, quantitative terms; therefore, we have explored the use of reflection to convert tacit knowledge to explicit knowledge. The experiment adopted a Plan-Do-Check-Act approach and concluded with developing a plan for new learning initiatives in the subsequent year's semester. The findings conclude that (1) problem-based learning develops more competencies than ordinarily measured at the examination, especially, the social/communication and personal competencies are developed; (2) students are capable of dealing with a complex and ambiguous problem, if properly guided. Four conditions were identified; (3) most students are not conscious of their learning, but are able to reflect if properly encouraged; and (4) improving engineering education should be considered as an organisational learning process.

A BPMN solution for chaining OGC services to quality assure location-based crowdsourced data

NASA Astrophysics Data System (ADS)

Meek, Sam; Jackson, Mike; Leibovici, Didier G.

2016-02-01

The Open Geospatial Consortium (OGC) Web Processing Service (WPS) standard enables access to a centralized repository of processes and services from compliant clients. A crucial part of the standard includes the provision to chain disparate processes and services to form a reusable workflow. To date this has been realized by methods such as embedding XML requests, using Business Process Execution Language (BPEL) engines and other external orchestration engines. Although these allow the user to define tasks and data artifacts as web services, they are often considered inflexible and complicated, often due to vendor specific solutions and inaccessible documentation. This paper introduces a new method of flexible service chaining using the standard Business Process Markup Notation (BPMN). A prototype system has been developed upon an existing open source BPMN suite to illustrate the advantages of the approach. The motivation for the software design is qualification of crowdsourced data for use in policy-making. The software is tested as part of a project that seeks to qualify, assure, and add value to crowdsourced data in a biological monitoring use case.

Heat-Affected Zone Studies Of Thermally Cut Structural Steels

DOT National Transportation Integrated Search

1999-12-01

According to this primer, asset management is a systematic process of maintaining, upgrading, and operating physical assets cost-effectively. It combines engineering principles with sound business practices and economic theory, and it provides tools ...

Engineering data management: Experience and projections

NASA Technical Reports Server (NTRS)

Jefferson, D. K.; Thomson, B.

1978-01-01

Experiences in developing a large engineering data management system are described. Problems which were encountered are presented and projected to future systems. Business applications involving similar types of data bases are described. A data base management system architecture proposed by the business community is described and its applicability to engineering data management is discussed. It is concluded that the most difficult problems faced in engineering and business data management can best be solved by cooperative efforts.

Business Process Re-Engineering Applied to the Air Force Institute of Technology Office of the Registrar, Records Management.

DTIC Science & Technology

1994-12-01

additional assistance when needed. Captain Morgan’s assistance was especially appreciated since he came to the team while he was still a graduate student ...business practices. One of the primary areas targeted for study are the registrar/ student records departments (Moore, 1993:8-9). While investigating...The service academy portion was broken into segments: financial management, admissions, registrar/ student records, development/alumni and facilities

CrossTalk. The Journal of Defense Software Engineering. Volume 25, Number 3

DTIC Science & Technology

2012-06-01

OMG) standard Business Process Modeling and Nota- tion ( BPMN ) [6] graphical notation. I will address each of these: identify and document steps...to a value stream map using BPMN and textual process narratives. The resulting process narratives or process metadata includes key information...objectives. Once the processes are identified we can graphically document them capturing the process using BPMN (see Figure 1). The BPMN models

Selling Technical Sales to Engineering Learners

ERIC Educational Resources Information Center

Bumblauskas, Daniel P.; Carberry, Adam R.; Sly, David P.

2017-01-01

Sales engineering or technical sales programs bridge engineering and business to educate engineering students in sales specific to their discipline. Students develop business awareness through such programs, providing the sales workforce with technically knowledgeable salespeople. The following study analyzed cohorts of students enrolled in a…

Enhancing Small-Business Opportunities in the DoD

DTIC Science & Technology

2008-01-01

to the DoD is below the small-business share of all industry sales. In some industries , including aircraft manufacturing and engineer - ing services...for goods not included in the Aircraft Manufacturing category as well as those not in another industry category for aircraft engine and engine parts...Purchases, % Small-Business Share of Industry , %, 20022007 2002 Aircraft Manufacturing 2.3 1.8 8.7 Engineering Services 13.6 16.9 20.3 R&D in the

Gas Station Pricing Game: A Lesson in Engineering Economics and Business Strategies.

ERIC Educational Resources Information Center

Sin, Aaron; Center, Alfred M.

2002-01-01

Describes an educational game designed for engineering majors that demonstrates engineering economics and business strategies, specifically the concepts of customer perception of product value, convenience, and price differentiation. (YDS)

Engineering Supply Management System: The Next Generation

DTIC Science & Technology

1991-09-01

010 Partia! receipts 0018 Automatic inventory update 0 048 Discrepant material 0 004 Order processing requirements Transaction reversal capability 0 012...August 1991. 2-5 sys.em’s modules that support the DEH’s needs are the Sales Order Processing , Register Sales, Purchase Order Processing , Inventory...modular system developed by PIC Business Systems, Incorporated. This system possesses Order Processing , Inventory Management, Purchase Orders, and

Information Integration for Concurrent Engineering (IICE) IDEF3 Process Description Capture Method Report

DTIC Science & Technology

1995-09-01

vital processes of a business. process, IDEF, method, methodology, modeling, knowledge acquisition, requirements definition, information systems... knowledge resources. Like manpower, materials, and machines, information and knowledge assets are recognized as vital resources that can be leveraged to...integrated enterprise. These technologies are designed to leverage information and knowledge resources as the key enablers for high quality systems

Class Model Development Using Business Rules

NASA Astrophysics Data System (ADS)

Skersys, Tomas; Gudas, Saulius

New developments in the area of computer-aided system engineering (CASE) greatly improve processes of the information systems development life cycle (ISDLC). Much effort is put into the quality improvement issues, but IS development projects still suffer from the poor quality of models during the system analysis and design cycles. At some degree, quality of models that are developed using CASE tools can be assured using various. automated. model comparison, syntax. checking procedures. It. is also reasonable to check these models against the business domain knowledge, but the domain knowledge stored in the repository of CASE tool (enterprise model) is insufficient (Gudas et al. 2004). Involvement of business domain experts into these processes is complicated because non- IT people often find it difficult to understand models that were developed by IT professionals using some specific modeling language.

Deploying TSP on a National Scale: An Experience Report from Pilot Projects in Mexico

DTIC Science & Technology

2009-03-01

the culture of Western businesses. To address this, the Ministry of Economy, in coordination with business organizations, education- al institutions...commercial desk- top client -server applications. The TSP builds on and enables the Personal Software Process. The PSP guides individual soft- ware developers...they do their day-to-day work. Al - though a great deal of data is available to manage the project and to manage individual perfor- mance, engineers

Systems Engineering and Management Applications of ISO 9001:2015 for Government

NASA Technical Reports Server (NTRS)

Shepherd, Christena C.

2016-01-01

The manufacturing segment of the business world is busy assessing the impact of ISO 9001:2015, and updating their management systems to meet the required compliance date. What does the new revision mean for government agencies that deliver large engineering projects rather than mass production? In fact, the standard, especially the new revision, can be used quite readily for government agencies, or applied to specific projects, once it is understood in terms of the similarities with systems engineering and project management. From there it can be extrapolated to "mission realization" systems, and a Quality Management System (QMS) is a logical result that can bring order to processes and systems that likely already exist in some fashion. ISO 9001:2015 is less product-oriented than previous versions. It can be more broadly applied to public organizations as well as private; and to services (missions) as well as products. The emphasis on risk management in the revised standard provides the needed balance for weighing decisions with respect to cost, schedule, technical, safety, and regulatory compliance; so if this is not part of agency governance already, this is a good place to start, especially for large engineering projects. The Systems Engineering standard used for this analysis is from NASA's NPR 7123.1 NASA Systems Engineering Processes and Requirements; however, those who are more familiar with ISO/IEC 26702 Systems Engineering-application and management of the systems engineering process, or SAE/EIA 632 Processes for Engineering a System will also recognize the similarities. In reality, the QMS outlined by ISO 9001 reinforces the systems engineering processes, and serves to ensure that they are adequately implemented, although most of the ISO 9001 literature emphasizes the production and process aspects of the standard. Rather than beginning with ISO 9001and getting lost in the vocabulary, it is useful to begin with the systems engineering lifecycle. Identification of stakeholder expectations, identifying solutions, creating specific product or service designs, production of the product or service, delivery to the public, and the associated management, planning, and control processes, are a familiar place to begin thinking of the overall system of identifying, designing, and competing a project or mission. Lining up this lifecycle with the ISO requirements (see Figure 1) illustrates how a quality management system is concerned with the same processes, and provides a governance and assurance function. If implemented properly, there are cost savings resulting from less rework, repair, reprocessing, failures, misplaced documents, and similar types of deficiencies1. Starting with an organization's systems engineering processes allows the organization to use their own terminology for a QMS plan, and tailor the plan to their own project or organization, so that it is more easily developed, understood, and implemented.

Nurturing Competitive Teamwork with Individual Excellence in an Engineering Classroom

ERIC Educational Resources Information Center

Kanyarusoke, Kant E.

2017-01-01

Team working and business competitiveness awareness are valuable skills for engineering graduates. This paper describes one way to nurture them while motivating individual student excellence in a normal engineering course. In six years, four groups of students were nurtured through real engineering business situations in a model similar to…

A transatlantic perspective on 20 emerging issues in biological engineering.

PubMed

Wintle, Bonnie C; Boehm, Christian R; Rhodes, Catherine; Molloy, Jennifer C; Millett, Piers; Adam, Laura; Breitling, Rainer; Carlson, Rob; Casagrande, Rocco; Dando, Malcolm; Doubleday, Robert; Drexler, Eric; Edwards, Brett; Ellis, Tom; Evans, Nicholas G; Hammond, Richard; Haseloff, Jim; Kahl, Linda; Kuiken, Todd; Lichman, Benjamin R; Matthewman, Colette A; Napier, Johnathan A; ÓhÉigeartaigh, Seán S; Patron, Nicola J; Perello, Edward; Shapira, Philip; Tait, Joyce; Takano, Eriko; Sutherland, William J

2017-11-14

Advances in biological engineering are likely to have substantial impacts on global society. To explore these potential impacts we ran a horizon scanning exercise to capture a range of perspectives on the opportunities and risks presented by biological engineering. We first identified 70 potential issues, and then used an iterative process to prioritise 20 issues that we considered to be emerging, to have potential global impact, and to be relatively unknown outside the field of biological engineering. The issues identified may be of interest to researchers, businesses and policy makers in sectors such as health, energy, agriculture and the environment.

Designing a place for automation.

PubMed

Bazzoli, F

1995-05-01

Re-engineering is a hot topic in health care as market forces increase pressure to cut costs. Providers and payers that are redesigning their business processes are counting on information systems to help achieve simplification and make large gains in efficiency. But these same organizations say they're reluctant to make large upfront investments in information systems until they know exactly what role technology will play in the re-engineered entity.

Enterprise resource planning (ERP) implementation using the value engineering methodology and Six Sigma tools

NASA Astrophysics Data System (ADS)

Leu, Jun-Der; Lee, Larry Jung-Hsing

2017-09-01

Enterprise resource planning (ERP) is a software solution that integrates the operational processes of the business functions of an enterprise. However, implementing ERP systems is a complex process. In addition to the technical issues, companies must address problems associated with business process re-engineering, time and budget control, and organisational change. Numerous industrial studies have shown that the failure rate of ERP implementation is high, even for well-designed systems. Thus, ERP projects typically require a clear methodology to support the project execution and effectiveness. In this study, we propose a theoretical model for ERP implementation. The value engineering (VE) method forms the basis of the proposed framework, which integrates Six Sigma tools. The proposed framework encompasses five phases: knowledge generation, analysis, creation, development and execution. In the VE method, potential ERP problems related to software, hardware, consultation and organisation are analysed in a group-decision manner and in relation to value, and Six Sigma tools are applied to avoid any project defects. We validate the feasibility of the proposed model by applying it to an international manufacturing enterprise in Taiwan. The results show improvements in customer response time and operational efficiency in terms of work-in-process and turnover of materials. Based on the evidence from the case study, the theoretical framework is discussed together with the study's limitations and suggestions for future research.

Business logic for geoprocessing of distributed geodata

NASA Astrophysics Data System (ADS)

Kiehle, Christian

2006-12-01

This paper describes the development of a business-logic component for the geoprocessing of distributed geodata. The business logic acts as a mediator between the data and the user, therefore playing a central role in any spatial information system. The component is used in service-oriented architectures to foster the reuse of existing geodata inventories. Based on a geoscientific case study of groundwater vulnerability assessment and mapping, the demands for such architectures are identified with special regard to software engineering tasks. Methods are derived from the field of applied Geosciences (Hydrogeology), Geoinformatics, and Software Engineering. In addition to the development of a business logic component, a forthcoming Open Geospatial Consortium (OGC) specification is introduced: the OGC Web Processing Service (WPS) specification. A sample application is introduced to demonstrate the potential of WPS for future information systems. The sample application Geoservice Groundwater Vulnerability is described in detail to provide insight into the business logic component, and demonstrate how information can be generated out of distributed geodata. This has the potential to significantly accelerate the assessment and mapping of groundwater vulnerability. The presented concept is easily transferable to other geoscientific use cases dealing with distributed data inventories. Potential application fields include web-based geoinformation systems operating on distributed data (e.g. environmental planning systems, cadastral information systems, and others).

Applying Scientific Skills to the Business World

NASA Astrophysics Data System (ADS)

Murry, Stefan

According to executive search firm Spencer Stuart, one third of Fortune 500 CEOs have undergraduate degrees in engineering or one of the physical sciences, versus 11 percent of such CEOs with degrees in business administration. Yet outside the boardroom, scientists leading businesses are often regarded as a curiosity, as if the skills that are believed by many to be essential to success in business somehow differ fundamentally from those developed by an education in engineering or science. This talk will focus on the skills necessary to succeed in business generally, and more specifically as an entrepreneur. We will explore the overlap between these skills and those that are developed by an education in engineering and science. We will also examine some of the common misperceptions held by scientists about the business world as well as the way scientists are often (mis)-perceived by the business community.

Enterprise 2.0 in Engineering and Business Education: Engineering and Business Students' View

ERIC Educational Resources Information Center

Ahrens, Andreas; Zascerinska, Jelena; Bassus, Olaf

2010-01-01

Contemporary engineers and entrepreneurs need to become more cognizant and responsive to the emerging needs of the market for engineering, enterprise and technology services. Enterprise 2.0 which penetrates our society more thoroughly with the availability of broadband services has the potential to contribute decisively to the sustainable…

Partnerships Take a New Turn.

ERIC Educational Resources Information Center

Rich, Don

1983-01-01

Milwaukee Area Technical College has joined with business and industry to develop training programs for computer-based information processing, and engineering and manufacturing technologies. These partnerships are important as companies look for ways to improve productivity and quality, keep abreast of changing technology, and ensure economic…

Implementation of the Business Process Modelling Notation (BPMN) in the modelling of anatomic pathology processes.

PubMed

Rojo, Marcial García; Rolón, Elvira; Calahorra, Luis; García, Felix Oscar; Sánchez, Rosario Paloma; Ruiz, Francisco; Ballester, Nieves; Armenteros, María; Rodríguez, Teresa; Espartero, Rafael Martín

2008-07-15

Process orientation is one of the essential elements of quality management systems, including those in use in healthcare. Business processes in hospitals are very complex and variable. BPMN (Business Process Modelling Notation) is a user-oriented language specifically designed for the modelling of business (organizational) processes. Previous experiences of the use of this notation in the processes modelling within the Pathology in Spain or another country are not known. We present our experience in the elaboration of the conceptual models of Pathology processes, as part of a global programmed surgical patient process, using BPMN. With the objective of analyzing the use of BPMN notation in real cases, a multidisciplinary work group was created, including software engineers from the Dep. of Technologies and Information Systems from the University of Castilla-La Mancha and health professionals and administrative staff from the Hospital General de Ciudad Real. The work in collaboration was carried out in six phases: informative meetings, intensive training, process selection, definition of the work method, process describing by hospital experts, and process modelling. The modelling of the processes of Anatomic Pathology is presented using BPMN. The presented subprocesses are those corresponding to the surgical pathology examination of the samples coming from operating theatre, including the planning and realization of frozen studies. The modelling of Anatomic Pathology subprocesses has allowed the creation of an understandable graphical model, where management and improvements are more easily implemented by health professionals.

Implementation of the Business Process Modelling Notation (BPMN) in the modelling of anatomic pathology processes

PubMed Central

Rojo, Marcial García; Rolón, Elvira; Calahorra, Luis; García, Felix Óscar; Sánchez, Rosario Paloma; Ruiz, Francisco; Ballester, Nieves; Armenteros, María; Rodríguez, Teresa; Espartero, Rafael Martín

2008-01-01

Background Process orientation is one of the essential elements of quality management systems, including those in use in healthcare. Business processes in hospitals are very complex and variable. BPMN (Business Process Modelling Notation) is a user-oriented language specifically designed for the modelling of business (organizational) processes. Previous experiences of the use of this notation in the processes modelling within the Pathology in Spain or another country are not known. We present our experience in the elaboration of the conceptual models of Pathology processes, as part of a global programmed surgical patient process, using BPMN. Methods With the objective of analyzing the use of BPMN notation in real cases, a multidisciplinary work group was created, including software engineers from the Dep. of Technologies and Information Systems from the University of Castilla-La Mancha and health professionals and administrative staff from the Hospital General de Ciudad Real. The work in collaboration was carried out in six phases: informative meetings, intensive training, process selection, definition of the work method, process describing by hospital experts, and process modelling. Results The modelling of the processes of Anatomic Pathology is presented using BPMN. The presented subprocesses are those corresponding to the surgical pathology examination of the samples coming from operating theatre, including the planning and realization of frozen studies. Conclusion The modelling of Anatomic Pathology subprocesses has allowed the creation of an understandable graphical model, where management and improvements are more easily implemented by health professionals. PMID:18673511

A Data-Driven Solution for Performance Improvement

NASA Technical Reports Server (NTRS)

2002-01-01

Marketed as the "Software of the Future," Optimal Engineering Systems P.I. EXPERT(TM) technology offers statistical process control and optimization techniques that are critical to businesses looking to restructure or accelerate operations in order to gain a competitive edge. Kennedy Space Center granted Optimal Engineering Systems the funding and aid necessary to develop a prototype of the process monitoring and improvement software. Completion of this prototype demonstrated that it was possible to integrate traditional statistical quality assurance tools with robust optimization techniques in a user- friendly format that is visually compelling. Using an expert system knowledge base, the software allows the user to determine objectives, capture constraints and out-of-control processes, predict results, and compute optimal process settings.

AAL service development loom--from the idea to a marketable business model.

PubMed

Kriegel, Johannes; Auinger, Klemens

2015-01-01

The Ambient Assisted Living (AAL) market is still in an early stage of development. Previous approaches of comprehensive AAL services are mostly supply-side driven and focused on hardware and software. Usually this type of AAL solutions does not lead to a sustainable success on the market. Research and development increasingly focuses on demand and customer requirements in addition to the social and legal framework. The question is: How can a systematic performance measurement strategy along a service development process support the market-ready design of a concrete business model for AAL service? Within the EU funded research project DALIA (Assistant for Daily Life Activities at Home) an iterative service development process uses an adapted Osterwalder business model canvas. The application of a performance measurement index (PMI) to support the process has been developed and tested. Development of an iterative service development model using a supporting PMI. The PMI framework is developed throughout the engineering of a virtual assistant (AVATAR) as a modular interface to connect informal carers with necessary and useful services. Future research should seek to ensure that the PMI enables meaningful transparency regarding targeting (e.g. innovative AAL service), design (e.g. functional hybrid AAL service) and implementation (e.g. marketable AAL support services). To this end, a further reference to further testing practices is required. The aim must be to develop a weighted PMI in the context of further research, which supports both the service engineering and the subsequent service management process.

The Business Case for Systems Engineering Study: Results of the Systems Engineering Effectiveness Survey

DTIC Science & Technology

2012-11-01

reflecting the fact that project managers can often optimize the value of one of these parameters, but only at the expense of the other two. For example...which system developers can compare their SE capabilities to manage SE process improvements. As a reward for their participation, the companion...higher requirements development and management capability is strongly associat- ed with better program performance, particularly on challenging projects

Team-Based Programs: The EMP. An Industry/University Partnership-The Educational Model for the 21st Century.

ERIC Educational Resources Information Center

Haynes, Ray; And Others

California Polytechnic State University's College of Business and College of Engineering have joined forces to create a joint Engineering Management Program (EMP). Students holding undergraduate engineering or equivalent degrees enter and earn both Masters in Business Administration and Masters of Science in Engineering in 24 months. The program…

Theory and Practice Meets in Industrial Process Design -Educational Perspective-

NASA Astrophysics Data System (ADS)

Aramo-Immonen, Heli; Toikka, Tarja

Software engineer should see himself as a business process designer in enterprise resource planning system (ERP) re-engineering project. Software engineers and managers should have design dialogue. The objective of this paper is to discuss the motives to study the design research in connection of management education in order to envision and understand the soft human issues in the management context. Second goal is to develop means of practicing social skills between designers and managers. This article explores the affective components of design thinking in industrial management domain. In the conceptual part of this paper are discussed concepts of network and project economy, creativity, communication, use of metaphors, and design thinking. Finally is introduced empirical research plan and first empirical results from design method experiments among the multi-disciplined groups of the master-level students of industrial engineering and management and software engineering.

1301163

NASA Image and Video Library

2013-10-29

MSFC MECHANICAL ENGINEER BRIAN WEST, (L), DEMONSTRATES STRUCTURED LIGHT SCANNING PROCESS TO MEMBERS OF THE BREMEN, GERMANY, BUSINESS DELEGATION WHO VISITED MARSHALL RECENTLY. SENATOR MARTIN GÜNTHNER, MINISTRY OF ECONOMIC AFFAIRS, LABOUR AND PORTS (CENTER) VIEWS THE PRESSURE VESSEL BEING SCANNED. AT RIGHT IS BERND SCHMELING, SENIOR MANAGER PROCUREMENT, AIRBUS OPERATIONS GMBH

Integrating utilization-focused evaluation with business process modeling for clinical research improvement.

PubMed

Kagan, Jonathan M; Rosas, Scott; Trochim, William M K

2010-10-01

New discoveries in basic science are creating extraordinary opportunities to design novel biomedical preventions and therapeutics for human disease. But the clinical evaluation of these new interventions is, in many instances, being hindered by a variety of legal, regulatory, policy and operational factors, few of which enhance research quality, the safety of study participants or research ethics. With the goal of helping increase the efficiency and effectiveness of clinical research, we have examined how the integration of utilization-focused evaluation with elements of business process modeling can reveal opportunities for systematic improvements in clinical research. Using data from the NIH global HIV/AIDS clinical trials networks, we analyzed the absolute and relative times required to traverse defined phases associated with specific activities within the clinical protocol lifecycle. Using simple median duration and Kaplan-Meyer survival analysis, we show how such time-based analyses can provide a rationale for the prioritization of research process analysis and re-engineering, as well as a means for statistically assessing the impact of policy modifications, resource utilization, re-engineered processes and best practices. Successfully applied, this approach can help researchers be more efficient in capitalizing on new science to speed the development of improved interventions for human disease.

40 CFR 91.704 - Exemptions and exclusions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Engines § 91.704 Exemptions and exclusions. (a) Individuals and businesses are eligible to import...) A display marine engine may be imported by any person for purposes related to a business or the... permitted by this paragraph: (1) National security exemption. A nonconforming marine engine may be imported...

40 CFR 91.704 - Exemptions and exclusions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Engines § 91.704 Exemptions and exclusions. (a) Individuals and businesses are eligible to import...) A display marine engine may be imported by any person for purposes related to a business or the... permitted by this paragraph: (1) National security exemption. A nonconforming marine engine may be imported...

Comparison of engagement with ethics between an engineering and a business program.

PubMed

Culver, Steven M; Puri, Ishwar K; Wokutch, Richard E; Lohani, Vinod

2013-06-01

Increasing university students' engagement with ethics is becoming a prominent call to action for higher education institutions, particularly professional schools like business and engineering. This paper provides an examination of student attitudes regarding ethics and their perceptions of ethics coverage in the curriculum at one institution. A particular focus is the comparison between results in the business college, which has incorporated ethics in the curriculum and has been involved in ethics education for a longer period, with the engineering college, which is in the nascent stages of developing ethics education in its courses. Results show that student attitudes and perceptions are related to the curriculum. In addition, results indicate that it might be useful for engineering faculty to use business faculty as resources in the development of their ethics curricula.

A transatlantic perspective on 20 emerging issues in biological engineering

PubMed Central

Rhodes, Catherine; Molloy, Jennifer C; Millett, Piers; Adam, Laura; Breitling, Rainer; Carlson, Rob; Casagrande, Rocco; Dando, Malcolm; Doubleday, Robert; Drexler, Eric; Edwards, Brett; Ellis, Tom; Evans, Nicholas G; Hammond, Richard; Haseloff, Jim; Kahl, Linda; Kuiken, Todd; Lichman, Benjamin R; Matthewman, Colette A; Napier, Johnathan A; ÓhÉigeartaigh, Seán S; Patron, Nicola J; Perello, Edward; Shapira, Philip; Tait, Joyce; Takano, Eriko; Sutherland, William J

2017-01-01

Advances in biological engineering are likely to have substantial impacts on global society. To explore these potential impacts we ran a horizon scanning exercise to capture a range of perspectives on the opportunities and risks presented by biological engineering. We first identified 70 potential issues, and then used an iterative process to prioritise 20 issues that we considered to be emerging, to have potential global impact, and to be relatively unknown outside the field of biological engineering. The issues identified may be of interest to researchers, businesses and policy makers in sectors such as health, energy, agriculture and the environment. PMID:29132504

A Software Engineering Approach based on WebML and BPMN to the Mediation Scenario of the SWS Challenge

NASA Astrophysics Data System (ADS)

Brambilla, Marco; Ceri, Stefano; Valle, Emanuele Della; Facca, Federico M.; Tziviskou, Christina

Although Semantic Web Services are expected to produce a revolution in the development of Web-based systems, very few enterprise-wide design experiences are available; one of the main reasons is the lack of sound Software Engineering methods and tools for the deployment of Semantic Web applications. In this chapter, we present an approach to software development for the Semantic Web based on classical Software Engineering methods (i.e., formal business process development, computer-aided and component-based software design, and automatic code generation) and on semantic methods and tools (i.e., ontology engineering, semantic service annotation and discovery).

Integrating ergonomics knowledge into business-driven design projects: The shaping of resource constraints in engineering consultancy.

PubMed

Hall-Andersen, Lene Bjerg; Neumann, Patrick; Broberg, Ole

2016-10-17

The integration of ergonomics knowledge into engineering projects leads to both healthier and more efficient workplaces. There is a lack of knowledge about integrating ergonomic knowledge into the design practice in engineering consultancies. This study explores how organizational resources can pose constraints for the integration of ergonomics knowledge into engineering design projects in a business-driven setting, and how ergonomists cope with these resource constraints. An exploratory case study in an engineering consultancy was conducted. A total of 27 participants were interviewed. Data were collected applying semi-structured interviews, observations, and documentary studies. Interviews were transcribed, coded, and categorized into themes. From the analysis five overall themes emerged as major constituents of resource constraints: 1) maximizing project revenue, 2) payment for ergonomics services, 3) value of ergonomic services, 4) role of the client, and 5) coping strategies to overcome resource constraints. We hypothesize that resource constraints were shaped due to sub-optimization of costs in design projects. The economical contribution of ergonomics measures was not evaluated in the entire life cycle of a designed workplace. Coping strategies included teaming up with engineering designers in the sales process or creating an alliance with ergonomists in the client organization.

Building a Web-based drug ordering system for hospitals: from requirements engineering to prototyping.

PubMed

Hübner, U; Klein, F; Hofstetter, J; Kammeyer, G; Seete, H

2000-01-01

Web-based drug ordering allows a growing number of hospitals without pharmacy to communicate seamlessly with their external pharmacy. Business process analysis and object oriented modelling performed together with the users at a pilot hospital resulted in a comprehensive picture of the user and business requirements for electronic drug ordering. The user requirements were further validated with the help of a software prototype. In order to capture the needs of a large number of users CAP10, a new method making use of pre-built models, is proposed. Solutions for coping with the technical requirements (interfacing the business software at the pharmacy) and with the legal requirements (signing the orders) are presented.

Joint Engineering Leadership Development Program: Developing a Diverse Regional Engineering Talent Ecosystem. A BHEF Case Study

ERIC Educational Resources Information Center

Business-Higher Education Forum, 2017

2017-01-01

Through the collaboration of its business and academic partners, the Business-Higher Education Forum (BHEF) launched the National Higher Education and Workforce Initiative (HEWI) to support business-higher education partnerships that co-design innovative community college and university pathways to careers, as well as maximize work-based learning…

BPELPower—A BPEL execution engine for geospatial web services

NASA Astrophysics Data System (ADS)

Yu, Genong (Eugene); Zhao, Peisheng; Di, Liping; Chen, Aijun; Deng, Meixia; Bai, Yuqi

2012-10-01

The Business Process Execution Language (BPEL) has become a popular choice for orchestrating and executing workflows in the Web environment. As one special kind of scientific workflow, geospatial Web processing workflows are data-intensive, deal with complex structures in data and geographic features, and execute automatically with limited human intervention. To enable the proper execution and coordination of geospatial workflows, a specially enhanced BPEL execution engine is required. BPELPower was designed, developed, and implemented as a generic BPEL execution engine with enhancements for executing geospatial workflows. The enhancements are especially in its capabilities in handling Geography Markup Language (GML) and standard geospatial Web services, such as the Web Processing Service (WPS) and the Web Feature Service (WFS). BPELPower has been used in several demonstrations over the decade. Two scenarios were discussed in detail to demonstrate the capabilities of BPELPower. That study showed a standard-compliant, Web-based approach for properly supporting geospatial processing, with the only enhancement at the implementation level. Pattern-based evaluation and performance improvement of the engine are discussed: BPELPower directly supports 22 workflow control patterns and 17 workflow data patterns. In the future, the engine will be enhanced with high performance parallel processing and broad Web paradigms.

A queueing theory based model for business continuity in hospitals.

PubMed

Miniati, R; Cecconi, G; Dori, F; Frosini, F; Iadanza, E; Biffi Gentili, G; Niccolini, F; Gusinu, R

2013-01-01

Clinical activities can be seen as results of precise and defined events' succession where every single phase is characterized by a waiting time which includes working duration and possible delay. Technology makes part of this process. For a proper business continuity management, planning the minimum number of devices according to the working load only is not enough. A risk analysis on the whole process should be carried out in order to define which interventions and extra purchase have to be made. Markov models and reliability engineering approaches can be used for evaluating the possible interventions and to protect the whole system from technology failures. The following paper reports a case study on the application of the proposed integrated model, including risk analysis approach and queuing theory model, for defining the proper number of device which are essential to guarantee medical activity and comply the business continuity management requirements in hospitals.

SpaceTech—Postgraduate space education

NASA Astrophysics Data System (ADS)

de Bruijn, Ferdi J.; Ashford, Edward W.; Larson, Wiley J.

2008-07-01

SpaceTech is a postgraduate program geared primarily for mid-career space professionals seeking to gain or improve their expertise in space systems engineering and in business engineering. SpaceTech provides a lifelong impact on its participants by broadening their capabilities, encouraging systematic "end-to-end" thinking and preparing them for any technical or business-related engineering challenges they may encounter. This flexible 1-year program offers high competency gain and increased business skills. It is held in attractive locations in a flexible, multi-cultural environment. SpaceTech is a highly effective master's program certified by the esteemed Technical University of Delft (TUD), Netherlands. SpaceTech provides expert instructors who place no barriers between themselves and participants. The program combines innovative and flexible new approaches with time-tested methods to give participants the skills required for future missions and new business, while allowing participants to meet their work commitments at the same time as they study for their master's degree. The SpaceTech program is conducted in separate sessions, generally each of 2-week duration, separated by periods of some 6-8 weeks, during which time participants may return to their normal jobs. It also includes introductory online course material that the participants can study at their leisure. The first session is held at the TUD, with subsequent sessions held at strategic space agency locations. By participating at two or more of these sessions, attendees can earn certificates of satisfactory completion from TU Delft. By participating in all of the sessions, as well as taking part in the companion Central Case Project (CCP), participants earn an accredited and highly respected master's degree in Space Systems Engineering from the TUD. Seven distinct SpaceTech modules are provided during these sessions: Space Mission Analysis and Design, Systems Engineering, Business Engineering, Interpersonal Skills, Telecommunications, Earth Observation and Navigation. A group CCP, a major asset of this unique program, is a focused project, aimed at the formation of a credible virtual commercial space-related business. Participants exercise space systems engineering fundamentals as well as marketing and business engineering tools, with the goal of creating a financially viable business opportunity. They then present the result, in the form of an unsolicited proposal to potential investors, as well as a varied group of engineers, managers and executives from the space community. During the CCP, participants learn the ties between mission and system design and the potential return to investors. They develop an instinct for the technical concepts and which of the parameters to adjust to make their newly conceived business more effective and profitable.

Introducing the CERT (Trademark) Resiliency Engineering Framework: Improving the Security and Sustainability Processes

DTIC Science & Technology

2007-05-01

business processes and services. 4. Security operations management addresses the day-to-day activities that the organization performs to protect the...Management TM – Technology Management Security Operations Management SOM – Security Operations Management 5.7.2 Important Operations Competency...deals with the provision of access rights to informa- tion and technical assets SOM – Security Operations Management , which addresses the fundamental

77 FR 74166 - Report of Acreage, Noninsured Crop Disaster Assistance Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

..., Office of Management and Budget, Washington, DC 20503. FOR FURTHER INFORMATION CONTACT: Jantrice Williams... waterbeds); ornamental nursery (including the size and origin, that is container or field grown, of plants... benefits and services through the re-engineering of farm program business processes and the adoption of...

A Treatise on the Application of Life Cycle Management Principles in Agricultural & Biological Engineering

USDA-ARS?s Scientific Manuscript database

Life Cycle Management (LCM) is a systematic approach, mindset and culture that considers economic, social, and environmental factors among other factors in the decision making process throughout various business or organizational decisions that affect both inputs and outputs of a product or service...

Medical device development.

PubMed

Panescu, Dorin

2009-01-01

The development of a successful medical product requires not only engineering design efforts, but also clinical, regulatory, marketing and business expertise. This paper reviews items related to the process of designing medical devices. It discusses the steps required to take a medical product idea from concept, through development, verification and validation, regulatory approvals and market release.

Beta Testing in Social Work

ERIC Educational Resources Information Center

Traube, Dorian E.; Begun, Stephanie; Petering, Robin; Flynn, Marilyn L.

2017-01-01

The field of social work does not currently have a widely adopted method for expediting innovations into micro- or macropractice. Although it is common in fields such as engineering and business to have formal processes for accelerating scientific advances into consumer markets, few comparable mechanisms exist in the social sciences or social…

Improving TOGAF ADM 9.1 Migration Planning Phase by ITIL V3 Service Transition

NASA Astrophysics Data System (ADS)

Hanum Harani, Nisa; Akhmad Arman, Arry; Maulana Awangga, Rolly

2018-04-01

Modification planning of business transformation involving technological utilization required a system of transition and migration planning process. Planning of system migration activity is the most important. The migration process is including complex elements such as business re-engineering, transition scheme mapping, data transformation, application development, individual involvement by computer and trial interaction. TOGAF ADM is the framework and method of enterprise architecture implementation. TOGAF ADM provides a manual refer to the architecture and migration planning. The planning includes an implementation solution, in this case, IT solution, but when the solution becomes an IT operational planning, TOGAF could not handle it. This paper presents a new model framework detail transitions process of integration between TOGAF and ITIL. We evaluated our models in field study inside a private university.

Frank Gilbreth and health care delivery method study driven learning.

PubMed

Towill, Denis R

2009-01-01

The purpose of this article is to look at method study, as devised by the Gilbreths at the beginning of the twentieth century, which found early application in hospital quality assurance and surgical "best practice". It has since become a core activity in all modern methods, as applied to healthcare delivery improvement programmes. The article traces the origin of what is now currently and variously called "business process re-engineering", "business process improvement" and "lean healthcare" etc., by different management gurus back to the century-old pioneering work of Frank Gilbreth. The outcome is a consistent framework involving "width", "length" and "depth" dimensions within which healthcare delivery systems can be analysed, designed and successfully implemented to achieve better and more consistent performance. Healthcare method (saving time plus saving motion) study is best practised as co-joint action learning activity "owned" by all "players" involved in the re-engineering process. However, although process mapping is a key step forward, in itself it is no guarantee of effective re-engineering. It is not even the beginning of the end of the change challenge, although it should be the end of the beginning. What is needed is innovative exploitation of method study within a healthcare organisational learning culture accelerated via the Gilbreth Knowledge Flywheel. It is shown that effective healthcare delivery pipeline improvement is anchored into a team approach involving all "players" in the system especially physicians. A comprehensive process study, constructive dialogue, proper and highly professional re-engineering plus managed implementation are essential components. Experience suggests "learning" is thereby achieved via "natural groups" actively involved in healthcare processes. The article provides a proven method for exploiting Gilbreths' outputs and their many successors in enabling more productive evidence-based healthcare delivery as summarised in the "learn-do-learn-do" feedback loop in the Gilbreth Knowledge Flywheel.

The Application of Collaborative Business Intelligence Technology in the Hospital SPD Logistics Management Model.

PubMed

Liu, Tongzhu; Shen, Aizong; Hu, Xiaojian; Tong, Guixian; Gu, Wei

2017-06-01

We aimed to apply collaborative business intelligence (BI) system to hospital supply, processing and distribution (SPD) logistics management model. We searched Engineering Village database, China National Knowledge Infrastructure (CNKI) and Google for articles (Published from 2011 to 2016), books, Web pages, etc., to understand SPD and BI related theories and recent research status. For the application of collaborative BI technology in the hospital SPD logistics management model, we realized this by leveraging data mining techniques to discover knowledge from complex data and collaborative techniques to improve the theories of business process. For the application of BI system, we: (i) proposed a layered structure of collaborative BI system for intelligent management in hospital logistics; (ii) built data warehouse for the collaborative BI system; (iii) improved data mining techniques such as supporting vector machines (SVM) and swarm intelligence firefly algorithm to solve key problems in hospital logistics collaborative BI system; (iv) researched the collaborative techniques oriented to data and business process optimization to improve the business processes of hospital logistics management. Proper combination of SPD model and BI system will improve the management of logistics in the hospitals. The successful implementation of the study requires: (i) to innovate and improve the traditional SPD model and make appropriate implement plans and schedules for the application of BI system according to the actual situations of hospitals; (ii) the collaborative participation of internal departments in hospital including the department of information, logistics, nursing, medical and financial; (iii) timely response of external suppliers.

Differences in short-term memory span of social sciences, science and engineering, and business majors

NASA Astrophysics Data System (ADS)

Khan, Naeem Ullah

This study investigated the difference in the short-term memory span of students of three major groups, namely Social Sciences, Science and Engineering, and Business. This study was designed to answer the following two questions: (1) Is there a difference between short-term memory span, measured by digit span, among the students in or intended for Social Sciences, Science and Engineering, and Business majors? (2) Is there a difference of short-term memory span, measured by word span, among students in or intended for Social Sciences, Science and Engineering, and Business majors? For answering these two questions, inferential and descriptive statistics were used. Analysis of Variance (ANOVA) was used to compare the means of the scores of digit span and word span among the three major groups. The means of digit span and word span among the three groups were compared to find out if a statistically significant difference existed among them or not. The observations were recorded at the level of significance at alpha = .05, and highly significant at alpha = .01. The answer to the first question is yes. The results of this study showed a statistically significant difference in the means of the digit span of the three major groups of students in or intended for Social Sciences, Science and Engineering, and Business. The mean scaled score for digit span was 12.88 for Social Sciences, 14.27 for Science and Engineering, and 15.33 for Business majors, respectively. The means of the free recalls word span of the three groups was 7.23 for Social Sciences, 7.89 for Science and Engineering, and 7.12 for Business majors, respectively. No significant difference was observed in the means of the word span of the three groups. In general observations, it is noted that students want to stay in the subjects or majors in which they can perform well or feel comfortable. In addition to this, students are screened in the school system due to levels of performance or selection pressure. Students' academic performances are dependent on their academic environment and on their inherited construct of short-term and long-term memory span. The use of the memory in certain majors, such as Science and Engineering and Business, are more demanding as compared to Social Science majors. For example, for Science and Engineering majors, students need to memorize complex structures and also need to keep larger information at a stretch in their short-term memory to incorporate it into incoming and outgoing information. Of the other memory related constructs, the present study examined only the short-term memory of the students of different majors, and it was found that the students of the Social Sciences had a shorter digit span as compared to the Science and Engineering and Business majors. Business major students had the largest digit span as compared to the Social Sciences and Science and Engineering majors. This supports the idea that memory construct plays a role in the selection of student majors.

Structure and Management of an Engineering Senior Design Course.

PubMed

Tanaka, Martin L; Fischer, Kenneth J

2016-07-01

The design of products and processes is an important area in engineering. Students in engineering schools learn fundamental principles in their courses but often lack an opportunity to apply these methods to real-world problems until their senior year. This article describes important elements that should be incorporated into a senior capstone design course. It includes a description of the general principles used in engineering design and a discussion of why students often have difficulty with application and revert to trial and error methods. The structure of a properly designed capstone course is dissected and its individual components are evaluated. Major components include assessing resources, identifying projects, establishing teams, understanding requirements, developing conceptual designs, creating detailed designs, building prototypes, testing performance, and final presentations. In addition to the course design, team management and effective mentoring are critical to success. This article includes suggested guidelines and tips for effective design team leadership, attention to detail, investment of time, and managing project scope. Furthermore, the importance of understanding business culture, displaying professionalism, and considerations of different types of senior projects is discussed. Through a well-designed course and proper mentoring, students will learn to apply their engineering skills and gain basic business knowledge that will prepare them for entry-level positions in industry.

European Software Engineering Process Group Conference (2nd Annual), EUROPEAN SEPG󈨥. Delegate Material, Tutorials

DTIC Science & Technology

1997-06-17

There is Good and Bad News With CMMs8 *bad news: process improvement takes time *good news: the first benefit Is better schedule management With PSP s...e g similar supp v EURO not sudden death toolset for assessment and v EURO => Business benefits detailed analysis) . EURO could collapse (low risk...from SPI live on even after year 2000. Priority BENEFITS Actions * Improved management and application development processes * Strengthened Change

Corruption: Engineers are Victims, Perpetrators or Both?

PubMed

Pecujlija, M; Cosic, I; Nesic-Grubic, L; Drobnjak, S

2015-08-01

This study was conducted in Serbian companies on licensed engineers and in its first part included a total of 336 licensed engineers who voluntarily completed the questionnaires about their ethical orientation and attitudes toward corruption and in the second part 214 engineers who participated in the first survey, who voluntarily evaluated their company's business operations characteristics. This study has clearly shown that there is a direct significant influence of the engineer's ethical orientations and attitudes toward corruption on their evaluation of the characteristics of their respective companies regarding business operations. This research also clearly shows that only engineers with a strong deontological orientation, low ethical subjectivity, and strong readiness to fight corruption, low corruption acceptance and high awareness of corruption can successfully fight corruption, improve the business operations of their companies and make beneficial changes to society. Otherwise, they should be considered as corruption perpetrators, not just as its victims.

Combining Architecture-Centric Engineering with the Team Software Process

DTIC Science & Technology

2010-12-01

colleagues from Quarksoft and CIMAT have re- cently reported on their experiences in “Introducing Software Architecture Development Methods into a TSP...Postmortem Lessons, new goals, new requirements, new risk , etc. Business and technical goals Estimates, plans, process, commitment Work products...architecture to mitigate the risks unco- vered by the ATAM. At the end of the iteration, version 1.0 of the architec- ture is available. Implement a second

A national collaboration process: Finnish engineering education for the benefit of people and environment.

PubMed

Takala, A; Korhonen-Yrjänheikki, K

2013-12-01

The key stakeholders of the Finnish engineering education collaborated during 2006-09 to reform the system of education, to face the challenges of the changing business environment and to create a national strategy for the Finnish engineering education. The work process was carried out using participatory work methods. Impacts of sustainable development (SD) on engineering education were analysed in one of the subprojects. In addition to participatory workshops, the core part of the work on SD consisted of a research with more than 60 interviews and an extensive literature survey. This paper discusses the results of the research and the work process of the Collaboration Group in the subproject of SD. It is suggested that enhancing systematic dialogue among key stakeholders using participatory work methods is crucial in increasing motivation and commitment in incorporating SD in engineering education. Development of the context of learning is essential for improving skills of engineering graduates in some of the key abilities related to SD: systemic- and life-cycle thinking, ethical understanding, collaborative learning and critical reflection skills. This requires changing of the educational paradigm from teacher-centred to learner-centred applying problem- and project-oriented active learning methods.

2004 research briefs :Materials and Process Sciences Center.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cieslak, Michael J.

2004-01-01

This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems, and Materials Modeling and Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-sciencemore » base has on the ultimate success of the NW program and the overall DOE technology portfolio.« less

Missile Defense Agency (MDA) Annual Small Business Conference

DTIC Science & Technology

2010-05-27

Technology Mission Oriented Business Integrated Services (MOBIS) Professional Engineering Services (PES) Environmental Services Advertising & Integrated ... Marketing Solutions (AIMS) Financial and Business Solutions (FABS) Financial and Business Solutions (FABS) Human Resources and EEO Services Temporary

Intelligent systems for KSC ground processing

NASA Technical Reports Server (NTRS)

Heard, Astrid E.

1992-01-01

The ground processing and launch of Shuttle vehicles and their payloads is the primary task of Kennedy Space Center. It is a process which is largely manual and contains little inherent automation. Business is conducted today much as it was during previous NASA programs such as Apollo. In light of new programs and decreasing budgets, NASA must find more cost effective ways in which to do business while retaining the quality and safety of activities. Advanced technologies including artificial intelligence could cut manpower and processing time. This paper is an overview of the research and development in Al technology at KSC with descriptions of the systems which have been implemented, as well as a few under development which are promising additions to ground processing software. Projects discussed cover many facets of ground processing activities, including computer sustaining engineering, subsystem monitor and diagnosis tools and launch team assistants. The deployed Al applications have proven an effectiveness which has helped to demonstrate the benefits of utilizing intelligent software in the ground processing task.

The Impact of Organisational Change on the Nature and Extent of Training in Australian Enterprises

ERIC Educational Resources Information Center

Smith, Andrew; Oczkowski, Edward; Noble, Charles; Macklin, Robert

2004-01-01

This article reports on a study investigating the relationship between the introduction of new management practices and the training provided by Australian enterprises for their employees. The new management practices investigated include teamworking, total quality management, lean production, business process re-engineering and the learning…

Become a Star: Teaching the Process of Design and Implementation of an Intelligent System

ERIC Educational Resources Information Center

Venables, Anne; Tan, Grace

2005-01-01

Teaching future knowledge engineers, the necessary skills for designing and implementing intelligent software solutions required by business, industry and research today, is a very tall order. These skills are not easily taught in traditional undergraduate computer science lectures; nor are the practical experiences easily reinforced in laboratory…

Going Up

NASA Technical Reports Server (NTRS)

Douglas, Freddie, III

2004-01-01

The accelerated Leadership Option (ALO) combines business management and systems engineering studies at the Massachusetts Institute of Technology (MIT) culminating in a Master of Science degree, with a one year developmental assignment. The program accelerates the development process of exceptionally promising project leaders to positions of increased responsibility. Participants are selected because of technical expertise and proven leadership abilities.

Leveraging the BPEL Event Model to Support QoS-aware Process Execution

NASA Astrophysics Data System (ADS)

Zaid, Farid; Berbner, Rainer; Steinmetz, Ralf

Business processes executed using compositions of distributed Web Services are susceptible to different fault types. The Web Services Business Process Execution Language (BPEL) is widely used to execute such processes. While BPEL provides fault handling mechanisms to handle functional faults like invalid message types, it still lacks a flexible native mechanism to handle non-functional exceptions associated with violations of QoS levels that are typically specified in a governing Service Level Agreement (SLA), In this paper, we present an approach to complement BPEL's fault handling, where expected QoS levels and necessary recovery actions are specified declaratively in form of Event-Condition-Action (ECA) rules. Our main contribution is leveraging BPEL's standard event model which we use as an event space for the created ECA rules. We validate our approach by an extension to an open source BPEL engine.

Conducting requirements analyses for research using routinely collected health data: a model driven approach.

PubMed

de Lusignan, Simon; Cashman, Josephine; Poh, Norman; Michalakidis, Georgios; Mason, Aaron; Desombre, Terry; Krause, Paul

2012-01-01

Medical research increasingly requires the linkage of data from different sources. Conducting a requirements analysis for a new application is an established part of software engineering, but rarely reported in the biomedical literature; and no generic approaches have been published as to how to link heterogeneous health data. Literature review, followed by a consensus process to define how requirements for research, using, multiple data sources might be modeled. We have developed a requirements analysis: i-ScheDULEs - The first components of the modeling process are indexing and create a rich picture of the research study. Secondly, we developed a series of reference models of progressive complexity: Data flow diagrams (DFD) to define data requirements; unified modeling language (UML) use case diagrams to capture study specific and governance requirements; and finally, business process models, using business process modeling notation (BPMN). These requirements and their associated models should become part of research study protocols.

Nursing informatics, outcomes, and quality improvement.

PubMed

Charters, Kathleen G

2003-08-01

Nursing informatics actively supports nursing by providing standard language systems, databases, decision support, readily accessible research results, and technology assessments. Through normalized datasets spanning an entire enterprise or other large demographic, nursing informatics tools support improvement of healthcare by answering questions about patient outcomes and quality improvement on an enterprise scale, and by providing documentation for business process definition, business process engineering, and strategic planning. Nursing informatics tools provide a way for advanced practice nurses to examine their practice and the effect of their actions on patient outcomes. Analysis of patient outcomes may lead to initiatives for quality improvement. Supported by nursing informatics tools, successful advance practice nurses leverage their quality improvement initiatives against the enterprise strategic plan to gain leadership support and resources.

A new model for graduate education and innovation in medical technology.

PubMed

Yazdi, Youseph; Acharya, Soumyadipta

2013-09-01

We describe a new model of graduate education in bioengineering innovation and design- a year long Master's degree program that educates engineers in the process of healthcare technology innovation for both advanced and low-resource global markets. Students are trained in an iterative "Spiral Innovation" approach that ensures early, staged, and repeated examination of all key elements of a successful medical device. This includes clinical immersion based problem identification and assessment (at Johns Hopkins Medicine and abroad), team based concept and business model development, and project planning based on iterative technical and business plan de-risking. The experiential, project based learning process is closely supported by several core courses in business, design, and engineering. Students in the program work on two team based projects, one focused on addressing healthcare needs in advanced markets and a second focused on low-resource settings. The program recently completed its fourth year of existence, and has graduated 61 students, who have continued on to industry or startups (one half), additional graduate education, or medical school (one third), or our own Global Health Innovation Fellowships. Over the 4 years, the program has sponsored 10 global health teams and 14 domestic/advanced market medtech teams, and launched 5 startups, of which 4 are still active. Projects have attracted over US$2.5M in follow-on awards and grants, that are supporting the continued development of over a dozen projects.

Prognostic modelling options for remaining useful life estimation by industry

NASA Astrophysics Data System (ADS)

Sikorska, J. Z.; Hodkiewicz, M.; Ma, L.

2011-07-01

Over recent years a significant amount of research has been undertaken to develop prognostic models that can be used to predict the remaining useful life of engineering assets. Implementations by industry have only had limited success. By design, models are subject to specific assumptions and approximations, some of which are mathematical, while others relate to practical implementation issues such as the amount of data required to validate and verify a proposed model. Therefore, appropriate model selection for successful practical implementation requires not only a mathematical understanding of each model type, but also an appreciation of how a particular business intends to utilise a model and its outputs. This paper discusses business issues that need to be considered when selecting an appropriate modelling approach for trial. It also presents classification tables and process flow diagrams to assist industry and research personnel select appropriate prognostic models for predicting the remaining useful life of engineering assets within their specific business environment. The paper then explores the strengths and weaknesses of the main prognostics model classes to establish what makes them better suited to certain applications than to others and summarises how each have been applied to engineering prognostics. Consequently, this paper should provide a starting point for young researchers first considering options for remaining useful life prediction. The models described in this paper are Knowledge-based (expert and fuzzy), Life expectancy (stochastic and statistical), Artificial Neural Networks, and Physical models.

The Application of Collaborative Business Intelligence Technology in the Hospital SPD Logistics Management Model

PubMed Central

LIU, Tongzhu; SHEN, Aizong; HU, Xiaojian; TONG, Guixian; GU, Wei

2017-01-01

Background: We aimed to apply collaborative business intelligence (BI) system to hospital supply, processing and distribution (SPD) logistics management model. Methods: We searched Engineering Village database, China National Knowledge Infrastructure (CNKI) and Google for articles (Published from 2011 to 2016), books, Web pages, etc., to understand SPD and BI related theories and recent research status. For the application of collaborative BI technology in the hospital SPD logistics management model, we realized this by leveraging data mining techniques to discover knowledge from complex data and collaborative techniques to improve the theories of business process. Results: For the application of BI system, we: (i) proposed a layered structure of collaborative BI system for intelligent management in hospital logistics; (ii) built data warehouse for the collaborative BI system; (iii) improved data mining techniques such as supporting vector machines (SVM) and swarm intelligence firefly algorithm to solve key problems in hospital logistics collaborative BI system; (iv) researched the collaborative techniques oriented to data and business process optimization to improve the business processes of hospital logistics management. Conclusion: Proper combination of SPD model and BI system will improve the management of logistics in the hospitals. The successful implementation of the study requires: (i) to innovate and improve the traditional SPD model and make appropriate implement plans and schedules for the application of BI system according to the actual situations of hospitals; (ii) the collaborative participation of internal departments in hospital including the department of information, logistics, nursing, medical and financial; (iii) timely response of external suppliers. PMID:28828316

Small business innovation research program solicitation: Closing date July 16, 1990

NASA Technical Reports Server (NTRS)

1990-01-01

This is the eighth annual solicitation by NASA addressed to small business firms, inviting them to submit proposals for research, or research and development, activities in some of the science and engineering areas of interest to NASA. The solicitation describes the Small Business Innovative Research (SBIR) program, identifies eligibility requirements, outlines the required proposal format and content, states proposal preparation and submission requirements, describes the proposal evaluation and award selection process, and provides other information to assist those interested in participating in NASA's SBIR program. It also identifies the technical topics and subtopics for which SBIR proposals are solicited. These cover a broad range of current NASA interests, but do not necessarily include all areas in which NASA plans or currently conducts research. High-risk high pay-off innovations are desired.

The Design of a Practical Enterprise Safety Management System

NASA Astrophysics Data System (ADS)

Gabbar, Hossam A.; Suzuki, Kazuhiko

This book presents design guidelines and implementation approaches for enterprise safety management system as integrated within enterprise integrated systems. It shows new model-based safety management where process design automation is integrated with enterprise business functions and components. It proposes new system engineering approach addressed to new generation chemical industry. It will help both the undergraduate and professional readers to build basic knowledge about issues and problems of designing practical enterprise safety management system, while presenting in clear way, the system and information engineering practices to design enterprise integrated solution.

Engineering design: A powerful influence on the business success on manufacturing industry

NASA Astrophysics Data System (ADS)

Coplin, John F.

1990-08-01

Engineering design, one of the most powerful forces in producing a package which matches market need, is discussed. It is essentially a detailed planning process backed by analysis and demonstration. The need for innovation to achieve competitive edge and profitability is considered. Innovation contains risk which must be controlled before substantial investment is made. The high rate of change of technology gives rise to the need for good training and retraining. Benefits which offsets costs at the time of occurring that cost are reached.

48 CFR 1819.7205 - Mentor-protégé agreements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... in— (i) General business management, including organizational management, financial management, personnel management, marketing, business development, and overall business planning; (ii) Engineering... ADMINISTRATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS NASA Mentor-Protégé Program 1819.7205 Mentor...

Improving The Prototyping Process In Department Of Defense Acquisition

DTIC Science & Technology

2014-06-01

System Flow Chart ................................................. 39 Figure 13. TRL Definitions (from ASD [R&E] 2011... ASD (R&E) Assistant Secretary of Defense for Research and Engineering BCL Business Capability Life cycle CDD Capability Development Document CDR...TRL 6 cannot be attained until the technology has been demonstrated in a relevant operational environment ( ASD [R&E] 2011). A technology that has

Federal Student Aid (FSA) Five-Year Strategic Plan. FY 2004-2008

ERIC Educational Resources Information Center

US Department of Education, 2004

2004-01-01

The FSA Five-Year Strategic Plan is a roadmap for FY 2004-2008 that identifies five long-range strategic objectives, tactical short-term goals, and performance management initiatives. In working toward the goals outlined in the plan, FSA will address a number of key challenges, including legacy system migration, business process re-engineering,…

Command and Control: US Army Staffs and the Operations Process

DTIC Science & Technology

2016-05-26

Architecture , 2nd ed. (New York: Elsevier, 2006). 2...Mainly technical experts in logistics and engineering, these proto-staff officers enabled both the Egyptian and Assyrian empires to conquer many of...Platform for Designing Business Architecture . New York: Elsevier, 2006, 2d edition. Gilbert, Felix. “Machiavelli: The Renaissance of the Art of War.” In

Centralized waste treatment of industrial wastewater

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saltzberg, E.R.; Cushnie, G.C. Jr.

1985-01-01

Centralized waste treatment (CWT) for industrial wastewater is described in this book. With the CWT approach, industrial firms send their wastes to a common processing plant. The book addresses the engineering and business-related problems that are encountered by private CWT firms, local governments, and industry in creating sufficient CWT capacity to meet the growing demand for CWT services.

Progressive Educators Must Lead, Not Follow.

ERIC Educational Resources Information Center

Hairston, George

2000-01-01

While technical training is crucial in an engineer's education, so too is the study of economics and business. Students need experience in business principles to succeed in today's business environment. (MM)

Practice in Master Course of Techno-Business Administration as a Techno-Business School

NASA Astrophysics Data System (ADS)

Nakamura, Takashi; Matsuura, Chikako

In this paper, the educational practice of the master course of techno-business administration (MTA) at Nagoya Institute of Technology (NIT) is introduced to propose the practical engineering education at a postgraduate level. MTA was established in 2003 on the basis of hundred years' engineering education at NIT. An objective of this school is to educate engineers to be leaders, entrepreneurs and managers. The practical tuition covers the fields in Industrial Management of Technologies, Core-Technologies and Laboratories work. Among these, the most focused and effective subject is “Case-Study,” in which students are encouraged to simulate business settings using elemental technologies developed by teaching staff. Discussions are made to apply the technology to match the possible markets. This type of experiences certainly motivates the students work and is clearly reflected in their research paper.

The coming commoditization of processes.

PubMed

Davenport, Thomas H

2005-06-01

Despite the much-ballyhooed increase in outsourcing, most companies are in do-it-yourself mode for the bulk of their processes, in large part because there's no way to compare outside organizations' capabilities with those of internal functions. Given the lack of comparability, it's almost surprising that anyone outsources today. But it's not surprising that cost is by far companies' primary criterion for evaluating outsourcers or that many companies are dissatisfied with their outsourcing relationships. A new world is coming, says the author, and it will lead to dramatic changes in the shape and structure of corporations. A broad set of process standards will soon make it easy to determine whether a business capability can be improved by outsourcing it. Such standards will also help businesses compare service providers and evaluate the costs versus the benefits of outsourcing. Eventually these costs and benefits will be so visible to buyers that outsourced processes will become a commodity, and prices will drop significantly. The low costs and low risk of outsourcing will accelerate the flow of jobs offshore, force companies to reassess their strategies, and change the basis of competition. The speed with which some businesses have already adopted process standards suggests that many previously unscrutinized areas are ripe for change. In the field of technology, for instance, the Carnegie Mellon Software Engineering Institute has developed a global standard for software development processes, called the Capability Maturity Model (CMM). For companies that don't have process standards in place, it makes sense for them to create standards by working with customers, competitors, software providers, businesses that processes may be outsourced to, and objective researchers and standard-setters. Setting standards is likely to lead to the improvement of both internal and outsourced processes.

The Intertwining of Enterprise Strategy and Requirements

NASA Astrophysics Data System (ADS)

Loucopoulos, Pericles; Garfield, Joy

Requirements Engineering techniques need to focus not only on the target technical system, as has traditionally been the case, but also on the interplay between business and system functionality. Whether a business wishes to exploit advances in technology to achieve new strategic objectives or to organise work in innovative ways, the process of Requirements Engineering could and should present opportunities for modelling and evaluating the potential impact that technology can bring about to the enterprise.This chapter discusses a co-designing process that offers opportunities of change to both the business and its underlying technical systems, in a synergistic manner. In these design situations some of the most challenging projects involve multiple stakeholders from different participating organisations, subcontractors, divisions etc who may have a diversity of expertise, come from different organisational cultures and often have competing goals. Stakeholders are faced with many different alternative future ‘worlds’ each one demanding a possibly different development strategy.There are acute questions about the potential structure of the new business system and how key variables in this structure could impact on the dynamics of the system. This chapter presents a framework which enables the evaluation of requirements through (a) system dynamics modelling, (b) ontology modelling, (c) scenario modelling and (d) rationale modelling. System dynamics modelling is used to define the behaviour of an enterprise system in terms of four perspectives. Ontology modelling is used to formally define invariant components of the physical and social world within the enterprise domain. Scenario modelling is used to identify critical variables and by quantitatively analyzing the effects of these variables through simulation to better understand the dynamic behaviour of the possible future structures. Rationale modelling is used to assist collaborative discussions when considering either ontology models or scenarios for change, developing maps, which chart the assumptions and reasoning behind key decisions during the requirements process.

Impact of Simulation Technology on Die and Stamping Business

NASA Astrophysics Data System (ADS)

Stevens, Mark W.

2005-08-01

Over the last ten years, we have seen an explosion in the use of simulation-based techniques to improve the engineering, construction, and operation of GM production tools. The impact has been as profound as the overall switch to CAD/CAM from the old manual design and construction methods. The changeover to N/C machining from duplicating milling machines brought advances in accuracy and speed to our construction activity. It also brought significant reductions in fitting sculptured surfaces. Changing over to CAD design brought similar advances in accuracy, and today's use of solid modeling has enhanced that accuracy gain while finally leading to the reduction in lead time and cost through the development of parametric techniques. Elimination of paper drawings for die design, along with the process of blueprinting and distribution, provided the savings required to install high capacity computer servers, high-speed data transmission lines and integrated networks. These historic changes in the application of CAE technology in manufacturing engineering paved the way for the implementation of simulation to all aspects of our business. The benefits are being realized now, and the future holds even greater promise as the simulation techniques mature and expand. Every new line of dies is verified prior to casting for interference free operation. Sheet metal forming simulation validates the material flow, eliminating the high costs of physical experimentation dependent on trial and error methods of the past. Integrated forming simulation and die structural analysis and optimization has led to a reduction in die size and weight on the order of 30% or more. The latest techniques in factory simulation enable analysis of automated press lines, including all stamping operations with corresponding automation. This leads to manufacturing lines capable of running at higher levels of throughput, with actual results providing the capability of two or more additional strokes per minute. As we spread these simulation techniques to the balance of our business, from blank de-stacking to the racking of parts, we anticipate continued reduction in lead-time and engineering expense while improving quality and start-up execution. The author will provide an overview of technology and business evolution of the math-based process that brought an historical transition and revitalization to the die and stamping industry in the past decade. Finally, the author will give an outlook for future business needs and technology development directions.

Service Quality Assessment for NASA's Deep Space Network: No Longer a Luxury

NASA Technical Reports Server (NTRS)

Barkley, Erik; Wolgast, Paul; Zendejas, Silvino

2010-01-01

When NASA's Deep Space Network (DSN) was established almost a half century ago, the concept of computer-based service delivery was impractical or infeasible due to the state of information technology As a result, the interface the DSN exposes to its customers tends to be equipment-centric, lacking a clear demarcation between the DSN and the mission operation systems (MOS) of its customers. As the number of customers has continued to increase, the need to improve efficiency and minimize costs has grown. This growth has been the impetus for a DSN transformation from an equipment-forrent provider to a provider of standard services. Service orientation naturally leads to requirements for service management, including proactive measurement of service quality and service levels as well as the efficiency of internal processes and the performance of service provisioning systems. DSN System Engineering has surveyed industry offerings to determine if commercial successes in decision support and Business Intelligence (BI) solutions can be applied to the DSN. A pilot project was initiated, and subsequently executed to determine the feasibility of repurposing a commercial Business Intelligence platform for engineering analysis in conjunction with the platform's intended business reporting and analysis functions.

Information System Engineering Supporting Observation, Orientation, Decision, and Compliant Action

NASA Astrophysics Data System (ADS)

Georgakopoulos, Dimitrios

The majority of today's software systems and organizational/business structures have been built on the foundation of solving problems via long-term data collection, analysis, and solution design. This traditional approach of solving problems and building corresponding software systems and business processes, falls short in providing the necessary solutions needed to deal with many problems that require agility as the main ingredient of their solution. For example, such agility is needed in responding to an emergency, in military command control, physical security, price-based competition in business, investing in the stock market, video gaming, network monitoring and self-healing, diagnosis in emergency health care, and many other areas that are too numerous to list here. The concept of Observe, Orient, Decide, and Act (OODA) loops is a guiding principal that captures the fundamental issues and approach for engineering information systems that deal with many of these problem areas. However, there are currently few software systems that are capable of supporting OODA. In this talk, we provide a tour of the research issues and state of the art solutions for supporting OODA. In addition, we provide specific examples of OODA solutions we have developed for the video surveillance and emergency response domains.

Launch Site Computer Simulation and its Application to Processes

NASA Technical Reports Server (NTRS)

Sham, Michael D.

1995-01-01

This paper provides an overview of computer simulation, the Lockheed developed STS Processing Model, and the application of computer simulation to a wide range of processes. The STS Processing Model is an icon driven model that uses commercial off the shelf software and a Macintosh personal computer. While it usually takes one year to process and launch 8 space shuttles, with the STS Processing Model this process is computer simulated in about 5 minutes. Facilities, orbiters, or ground support equipment can be added or deleted and the impact on launch rate, facility utilization, or other factors measured as desired. This same computer simulation technology can be used to simulate manufacturing, engineering, commercial, or business processes. The technology does not require an 'army' of software engineers to develop and operate, but instead can be used by the layman with only a minimal amount of training. Instead of making changes to a process and realizing the results after the fact, with computer simulation, changes can be made and processes perfected before they are implemented.

The Improvement Cycle: Analyzing Our Experience

NASA Technical Reports Server (NTRS)

Pajerski, Rose; Waligora, Sharon

1996-01-01

NASA's Software Engineering Laboratory (SEL), one of the earliest pioneers in the areas of software process improvement and measurement, has had a significant impact on the software business at NASA Goddard. At the heart of the SEL's improvement program is a belief that software products can be improved by optimizing the software engineering process used to develop them and a long-term improvement strategy that facilitates small incremental improvements that accumulate into significant gains. As a result of its efforts, the SEL has incrementally reduced development costs by 60%, decreased error rates by 85%, and reduced cycle time by 25%. In this paper, we analyze the SEL's experiences on three major improvement initiatives to better understand the cyclic nature of the improvement process and to understand why some improvements take much longer than others.

Employees' Perceptions of Barriers to Participation in Training and Development in Small Engineering Businesses

ERIC Educational Resources Information Center

Susomrith, Pattanee; Coetzer, Alan

2015-01-01

Purpose: This paper aims to investigate barriers to employee participation in voluntary formal training and development opportunities from the perspective of employees in small engineering businesses. Design/methodology/approach: An exploratory qualitative methodology involving data collection via site visits and in-depth semi-structured…

Integrating manufacturing softwares for intelligent planning execution: a CIIMPLEX perspective

NASA Astrophysics Data System (ADS)

Chu, Bei Tseng B.; Tolone, William J.; Wilhelm, Robert G.; Hegedus, M.; Fesko, J.; Finin, T.; Peng, Yun; Jones, Chris H.; Long, Junshen; Matthews, Mike; Mayfield, J.; Shimp, J.; Su, S.

1997-01-01

Recent developments have made it possible to interoperate complex business applications at much lower costs. Application interoperation, along with business process re- engineering can result in significant savings by eliminating work created by disconnected business processes due to isolated business applications. However, we believe much greater productivity benefits can be achieved by facilitating timely decision-making, utilizing information from multiple enterprise perspectives. The CIIMPLEX enterprise integration architecture is designed to enable such productivity gains by helping people to carry out integrated enterprise scenarios. An enterprise scenario is triggered typically by some external event. The goal of an enterprise scenario is to make the right decisions considering the full context of the problem. Enterprise scenarios are difficult for people to carry out because of the interdependencies among various actions. One can easily be overwhelmed by the large amount of information. We propose the use of software agents to help gathering relevant information and present them in the appropriate context of an enterprise scenario. The CIIMPLEX enterprise integration architecture is based on the FAIME methodology for application interoperation and plug-and-play. It also explores the use of software agents in application plug-and- play.

Experience in the Education of Engineers from Vietnam in the Faculty of Mining and Geoengineering AGH

NASA Astrophysics Data System (ADS)

Cała, Marek; Borowski, Marek

2018-03-01

The AGH University of Science and Technology collaborates closely with other universities, economic units, governmental and local administrative bodies. International cooperation plays a very important role in the academic research. The AGH University of Science and Technology has signed many collaboration agreements. They aim at multidimensional cooperation in the fields of education and academic research. AGH UST has always focused on collaboration with business and industry. In recent years, the global economy is undergoing massive transformations, what creates new challenges to companies and educational institutions that cater to the needs of industry. The expansion of business enterprises is largely dependent on their employees' expertise, skills and levels of competence. Certified engineers are provided by universities. Therefore, the qualifications of the graduates are determined by the curriculum and teaching methods, as well as the available educational and research facilities. Of equal importance is the qualified academic staff. Human activities in the field of engineering require finding solutions to problems of various nature and magnitude. An engineer's work consists in the design, construction, modification and maintenance of useful devices, processes and systems, using scientific and technical knowledge. In order to design complex engineering solutions, an engineer uses his imagination, experience, analytical skills, logical reasoning and makes conscious use of his knowledge. At the Faculty of Mining and Geoengineering of the AGH University of Science and Technology in Cracow, 15 engineers from Vietnam are studying Mining and Geology at the second-cycle studies (specialization: mine ventilation). The solutions proposed in the field of the engineers' education guarantee that foreign students gain both engineering knowledge and problem-solving skills. Therefore, the study programme was complemented by a series of practical aspects.

Dual-Use Space Technology Transfer Conference and Exhibition. Volume 1

NASA Technical Reports Server (NTRS)

Krishen, Kumar (Compiler)

1994-01-01

This document contains papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; new ways of doing business; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; ans robotics technologies. More than 77 papers, 20 presentations, and 20 exhibits covering various disciplines were presented b experts from NASA, universities, and industry.

New Mexico Small Business Assistance

Science.gov Websites

expertise Technical Assistance Individual Assistance Individual Assistance Request Form Leveraged Projects Assistance (NMSBA) Program allows New Mexico small businesses facing a technical challenge to access the business, small businesses with a technical challenge can seek assistance from lab scientists or engineers

Web-Based Simulation Games for the Integration of Engineering and Business Fundamentals

ERIC Educational Resources Information Center

Calfa, Bruno; Banholzer, William; Alger, Monty; Doherty, Michael

2017-01-01

This paper describes a web-based suite of simulation games that have the purpose to enhance the chemical engineering curriculum with business-oriented decisions. Two simulation cases are discussed whose teaching topics include closing material and energy balances, importance of recycle streams, price-volume relationship in a dynamic market, impact…

Human Systems Engineering: A Learning Model Designed To Converge Education, Business, and Industry.

ERIC Educational Resources Information Center

Hanson, Karen L.

The Human Systems Engineering (HSE) Model was created to facilitate collaboration among education, business, and industry. It emphasized the role of leaders who converge with others to accomplish their goals while paying attention to the key elements that create successful partnerships. The partnership of XXsys Technologies, Inc., University of…

Rising Opportunities in the Field of Engineering: Implications for Counselors

ERIC Educational Resources Information Center

Smith, Gloria S.; And Others

1973-01-01

In the Endicott Report a survey of businesses and industries indicated a lack of Black engineers, accountants, and graduates in business administration. The report indicated that competition is keen for Blacks talented in these fields. With the rising opportunities for Black talent, a clarification of needs and services must be projected to those…

40 CFR 35.6015 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... scope of the practice of architecture or professional engineering as defined by the laws of the State or... currently set at $100,000. Small business. A business as defined in section 3 of the Small Business Act, as...

Value Engineering Handbook

DTIC Science & Technology

2006-09-01

Six Sigma, • Theory of Constraints, and • Business Process Reengineering. To learn more about these models, a bibliography of sources of further...aspects of VE along with an online continuous- learning VE overview module. SAVE International is an international society devoted to the advancement and...seekers with knowledge sources (both written and experiential ). Communities of practice (CoPs) are proven vehicles for linking people with experience

13 CFR 120.330 - Who is eligible for an energy conservation loan?

Code of Federal Regulations, 2010 CFR

2010-01-01

... conservation loan? 120.330 Section 120.330 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Energy Conservation § 120.330 Who is eligible for an energy conservation loan? SBA may make or guarantee loans to assist a small business to design, engineer, manufacture...

13 CFR 120.330 - Who is eligible for an energy conservation loan?

Code of Federal Regulations, 2014 CFR

2014-01-01

... conservation loan? 120.330 Section 120.330 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Energy Conservation § 120.330 Who is eligible for an energy conservation loan? SBA may make or guarantee loans to assist a small business to design, engineer, manufacture...

13 CFR 120.330 - Who is eligible for an energy conservation loan?

Code of Federal Regulations, 2011 CFR

2011-01-01

... conservation loan? 120.330 Section 120.330 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Energy Conservation § 120.330 Who is eligible for an energy conservation loan? SBA may make or guarantee loans to assist a small business to design, engineer, manufacture...

13 CFR 120.330 - Who is eligible for an energy conservation loan?

Code of Federal Regulations, 2012 CFR

2012-01-01

... conservation loan? 120.330 Section 120.330 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Energy Conservation § 120.330 Who is eligible for an energy conservation loan? SBA may make or guarantee loans to assist a small business to design, engineer, manufacture...

13 CFR 120.330 - Who is eligible for an energy conservation loan?

Code of Federal Regulations, 2013 CFR

2013-01-01

... conservation loan? 120.330 Section 120.330 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Energy Conservation § 120.330 Who is eligible for an energy conservation loan? SBA may make or guarantee loans to assist a small business to design, engineer, manufacture...

X-traktor: A Rookie Robot, Simple, Yet Complex, Impeccably Designed, a Very Innovative Multidisciplinary Engineering Masterpiece

NASA Technical Reports Server (NTRS)

Henderson, A. J., Jr.

2001-01-01

FIRST is the acronym of For Inspiration and Recognition of Science and Technology. FIRST is a 501.C.3 non-profit organization whose mission is to generate an interest in science and engineering among today's young adults and youth. This mission is accomplished through a robot competition held annually in the spring of each year. NASAs Marshall Space Flight Center, Education Programs Department, awarded a grant to Lee High School, the sole engineering magnet school in Huntsville, Alabama. MSFC awarded the grant in hopes of fulfilling its goal of giving back invaluable resources to its community and engineers, as well as educating tomorrow's work force in the high-tech area of science and technology. Marshall engineers, Lee High School students and teachers, and a host of other volunteers and parents officially initiated this robot design process and competitive strategic game plan. The FIRST Robotics Competition is a national engineering contest, which immerses high school students in the exciting world of science and engineering. Teaming with engineers from government agencies, businesses, and universities enables the students to learn about the engineering profession. The students and engineers have six weeks to work together to brainstorm, design, procure, construct, and test their robot. The team then competes in a spirited, 'no-holds barred' tournament, complete with referees, other FIRST-designed robots, cheerleaders, and time clocks. The partnerships developed between schools, government agencies, businesses, and universities provide an exchange of resources and talent that build cooperation and expose students to new and rewarding career options. The result is a fun, exciting, and stimulating environment in which all participants discover the important connections between classroom experiences and real-world applications. This paper will highlight the story, engineering development, and evolutionary design of Xtraktor, the rookie robot, a manufacturing marvel and engineering achievement.

Clinical, information and business process modeling to promote development of safe and flexible software.

PubMed

Liaw, Siaw-Teng; Deveny, Elizabeth; Morrison, Iain; Lewis, Bryn

2006-09-01

Using a factorial vignette survey and modeling methodology, we developed clinical and information models - incorporating evidence base, key concepts, relevant terms, decision-making and workflow needed to practice safely and effectively - to guide the development of an integrated rule-based knowledge module to support prescribing decisions in asthma. We identified workflows, decision-making factors, factor use, and clinician information requirements. The Unified Modeling Language (UML) and public domain software and knowledge engineering tools (e.g. Protégé) were used, with the Australian GP Data Model as the starting point for expressing information needs. A Web Services service-oriented architecture approach was adopted within which to express functional needs, and clinical processes and workflows were expressed in the Business Process Execution Language (BPEL). This formal analysis and modeling methodology to define and capture the process and logic of prescribing best practice in a reference implementation is fundamental to tackling deficiencies in prescribing decision support software.

New shipyard layout design for the preliminary phase & case study for the green field project

NASA Astrophysics Data System (ADS)

Song, Young Joo; Woo, Jong Hun

2013-03-01

For several decades, Asian nations such as Korea, Japan and China have been leading the shipbuilding industry since the decline in Europe and America. However, several developing countries such as India, Brazil, etc. are going to make an entrance into the shipbuilding industry. These developing countries are finding technical partners or information providers because they are in situation of little experiences and technologies. Now, the shipbuilding engineering companies of shipbuilding advanced countries are getting a chance of engineering business against those developing countries. The starting point of this business model is green field project for the construction of new shipyard. This business model is started with a design of the shipyard layout. For the conducting of the shipyard layout design, four kinds of engineering parts are required. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is the foundation of the other engineering parts and it determines the shipyard capacity during the shipyard operation lifecycle. Previous researches about the shipyard layout design are out of the range from the business requirements because most research cases are in the tower of ivory, which means that there are little consideration of real ship and shipbuilding operation. In this paper, a shipyard layout design for preliminary phase is conducted for the target of newly planned shipyard at Venezuela of South America with an integrated method that is capable of dealing with actual master data from the shipyard. The layout design method of this paper is differentiated from the previous researches in that the actual product data from the target ship and the actual shipbuilding operation data are used for the required area estimation.

Enhancing Engineering Education through Engineering Management

ERIC Educational Resources Information Center

Pence, Kenneth R.; Rowe, Christopher J.

2012-01-01

Engineering Management courses are added to a traditional engineering curriculum to enhance the value of an undergraduate's engineering degree. A four-year engineering degree often leaves graduates lacking in business and management acumen. Engineering management education covers topics enhancing the value of new graduates by teaching management…

Maximizing reuse: Applying common sense and discipline

NASA Technical Reports Server (NTRS)

Waligora, Sharon; Langston, James

1992-01-01

Computer Sciences Corporation (CSC)/System Sciences Division (SSD) has maintained a long-term relationship with NASA/Goddard, providing satellite mission ground-support software and services for 23 years. As a partner in the Software Engineering Laboratory (SEL) since 1976, CSC has worked closely with NASA/Goddard to improve the software engineering process. This paper examines the evolution of reuse programs in this uniquely stable environment and formulates certain recommendations for developing reuse programs as a business strategy and as an integral part of production. It focuses on the management strategy and philosophy that have helped make reuse successful in this environment.

Systems engineering: A formal approach. Part 1: System concepts

NASA Astrophysics Data System (ADS)

Vanhee, K. M.

1993-03-01

Engineering is the scientific discipline focused on the creation of new artifacts that are supposed to be of some use to our society. Different types of artifacts require different engineering approaches. However, in all these disciplines the development of a new artifact is divided into stages. Three stages can always be recognized: Analysis, Design, and Realization. The book considers only the first two stages of the development process. It focuses on a specific type of artifacts, called discrete dynamic systems. These systems consist of active components of actors that consume and produce passive components or tokens. Three subtypes are studied in more detail: business systems (like a factory or restaurant), information systems (whether automated or not), and automated systems (systems that are controlled by an automated information system). The first subtype is studied by industrial engineers, the last by software engineers and electrical engineers, whereas the second is a battlefield for all three disciplines. The union of these disciplines is called systems engineering.

Finding Business Information on the "Invisible Web": Search Utilities vs. Conventional Search Engines.

ERIC Educational Resources Information Center

Darrah, Brenda

Researchers for small businesses, which may have no access to expensive databases or market research reports, must often rely on information found on the Internet, which can be difficult to find. Although current conventional Internet search engines are now able to index over on billion documents, there are many more documents existing in…

Service engineering for grid services in medicine and life science.

PubMed

Weisbecker, Anette; Falkner, Jürgen

2009-01-01

Clearly defined services with appropriate business models are necessary in order to exploit the benefit of grid computing for industrial and academic users in medicine and life sciences. In the project Services@MediGRID the service engineering approach is used to develop those clearly defined grid services and to provide sustainable business models for their usage.

A Preliminary Survey of Risk and Safety Operations at Selected Universities,

DTIC Science & Technology

1982-04-01

colleges such as engineering, but also by the business schools and the public policy schools. o The courses span a very wide range of interests and...offered by not only the technical colleges such as engineering, hut also by The business schools and the public policy schools. o The courses span a very

Entrepreneurial Education: Creating a Usable Economic Community Base. Rural Research Report. Volume 15, Issue 8, Spring 2004

ERIC Educational Resources Information Center

Williams, Lori E.

2004-01-01

If small businesses are the engines of our economy, then entrepreneurs are the sparks that ignite those engines. This research report will explain how entrepreneurship education programs can help students create and establish their own business. The paper defines entrepreneurship education, outlines the major components of entrepreneurship…

A case study of exploiting enterprise resource planning requirements

NASA Astrophysics Data System (ADS)

Niu, Nan; Jin, Mingzhou; Cheng, Jing-Ru C.

2011-05-01

The requirements engineering (RE) processes have become a key to conceptualising corporate-wide integrated solutions based on packaged enterprise resource planning (ERP) software. The RE literature has mainly focused on procuring the most suitable ERP package. Little is known about how an organisation exploits the chosen ERP RE model to frame the business application development. This article reports an exploratory case study of a key tenet of ERP RE adoption, namely that aligning business applications to the packaged RE model leads to integral practices and economic development. The case study analysed a series interrelated pilot projects developed for a business division of a large IT manufacturing and service company, using Oracle's appl1ication implementation method (AIM). The study indicated that AIM RE improved team collaboration and project management experience, but needed to make hidden assumptions explicit to support data visibility and integrity. Our study can direct researchers towards rigorous empirical evaluations of ERP RE adoption, collect experiences and lessons learned for practitioners, and help generate more effective and mature processes when exploiting ERP RE methods.

33 CFR 242.3 - References.

Code of Federal Regulations, 2014 CFR

2014-07-01

... MANAGEMENT SERVICES PROGRAM ESTABLISHMENT OF FEES FOR COST RECOVERY § 242.3 References. The references in... Engineers Engineering Regulation 1105-2-100, Planning Guidance Notebook. (c) Corps of Engineers Engineering Pamphlet 37-1-4, Cost of Doing Business. ...

33 CFR 242.3 - References.

Code of Federal Regulations, 2013 CFR

2013-07-01

... MANAGEMENT SERVICES PROGRAM ESTABLISHMENT OF FEES FOR COST RECOVERY § 242.3 References. The references in... Engineers Engineering Regulation 1105-2-100, Planning Guidance Notebook. (c) Corps of Engineers Engineering Pamphlet 37-1-4, Cost of Doing Business. ...

33 CFR 242.3 - References.

Code of Federal Regulations, 2012 CFR

2012-07-01

... MANAGEMENT SERVICES PROGRAM ESTABLISHMENT OF FEES FOR COST RECOVERY § 242.3 References. The references in... Engineers Engineering Regulation 1105-2-100, Planning Guidance Notebook. (c) Corps of Engineers Engineering Pamphlet 37-1-4, Cost of Doing Business. ...

33 CFR 242.3 - References.

Code of Federal Regulations, 2011 CFR

2011-07-01

... MANAGEMENT SERVICES PROGRAM ESTABLISHMENT OF FEES FOR COST RECOVERY § 242.3 References. The references in... Engineers Engineering Regulation 1105-2-100, Planning Guidance Notebook. (c) Corps of Engineers Engineering Pamphlet 37-1-4, Cost of Doing Business. ...

Building Safer Systems With SpecTRM

NASA Technical Reports Server (NTRS)

2003-01-01

System safety, an integral component in software development, often poses a challenge to engineers designing computer-based systems. While the relaxed constraints on software design allow for increased power and flexibility, this flexibility introduces more possibilities for error. As a result, system engineers must identify the design constraints necessary to maintain safety and ensure that the system and software design enforces them. Safeware Engineering Corporation, of Seattle, Washington, provides the information, tools, and techniques to accomplish this task with its Specification Tools and Requirements Methodology (SpecTRM). NASA assisted in developing this engineering toolset by awarding the company several Small Business Innovation Research (SBIR) contracts with Ames Research Center and Langley Research Center. The technology benefits NASA through its applications for Space Station rendezvous and docking. SpecTRM aids system and software engineers in developing specifications for large, complex safety critical systems. The product enables engineers to find errors early in development so that they can be fixed with the lowest cost and impact on the system design. SpecTRM traces both the requirements and design rationale (including safety constraints) throughout the system design and documentation, allowing engineers to build required system properties into the design from the beginning, rather than emphasizing assessment at the end of the development process when changes are limited and costly.System safety, an integral component in software development, often poses a challenge to engineers designing computer-based systems. While the relaxed constraints on software design allow for increased power and flexibility, this flexibility introduces more possibilities for error. As a result, system engineers must identify the design constraints necessary to maintain safety and ensure that the system and software design enforces them. Safeware Engineering Corporation, of Seattle, Washington, provides the information, tools, and techniques to accomplish this task with its Specification Tools and Requirements Methodology (SpecTRM). NASA assisted in developing this engineering toolset by awarding the company several Small Business Innovation Research (SBIR) contracts with Ames Research Center and Langley Research Center. The technology benefits NASA through its applications for Space Station rendezvous and docking. SpecTRM aids system and software engineers in developing specifications for large, complex safety critical systems. The product enables engineers to find errors early in development so that they can be fixed with the lowest cost and impact on the system design. SpecTRM traces both the requirements and design rationale (including safety constraints) throughout the system design and documentation, allowing engineers to build required system properties into the design from the beginning, rather than emphasizing assessment at the end of the development process when changes are limited and costly.

76 FR 67416 - Executive-led Business Development Mission to Kabul, Afghanistan, September 2011 (Dates Are...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-01

... DEPARTMENT OF COMMERCE International Trade Administration Executive-led Business Development... Commerce's International Trade Administration is organizing a business development trade mission to Kabul... sectors include: construction (including engineering, architecture, transportation and logistics, and...

About, for, in or through entrepreneurship in engineering education

NASA Astrophysics Data System (ADS)

Mäkimurto-Koivumaa, Soili; Belt, Pekka

2016-09-01

Engineering competences form a potential basis for entrepreneurship. There are pressures to find new approaches to entrepreneurship education (EE) in engineering education, as the traditional analytical logic of engineering does not match the modern view of entrepreneurship. Since the previous models do not give tangible enough tools on how to organise EE in practice, this article aims to develop a new framework for EE at the university level. We approach this aim by analysing existing scientific literature complemented by long-term practical observations, enabling a fruitful interplay between theory and practice. The developed framework recommends aspects in EE to be emphasised during each year of the study process. Action-based learning methods are highlighted in the beginning of studies to support students' personal growth. Explicit business knowledge is to be gradually increased only when professional, field-specific knowledge has been adequately accumulated.

CMMI for Services (SVC): The Strategic Landscape for Service

DTIC Science & Technology

2012-01-01

processes. • Many existing models are designed for specific services or industries . • Other existing models do not provide a clear improvement path...Production, such as engineering and manufacturing Disciplines and industries , such as education, health care, insurance, utilities, and hospitality...as a Service ―More and more major businesses and industries are being run on software and delivered as online services—from movies to agriculture

The Defense Messaging System (DMS) in the Navy Regional Enterprise Messaging System (NREMS) Environment: Evidence that Size Does Matter in DoD Business Process Engineering

DTIC Science & Technology

2007-06-01

data repository that will create a metadata card for each message for use by the federated search catalog as a reference. c. Joint DMS Core Product...yet. Once resolved, NREMS can move forward afloat. The AMHS in concert with NCES will be updated with the federated search capability. AMHS

Workflow-Based Software Development Environment

NASA Technical Reports Server (NTRS)

Izygon, Michel E.

2013-01-01

The Software Developer's Assistant (SDA) helps software teams more efficiently and accurately conduct or execute software processes associated with NASA mission-critical software. SDA is a process enactment platform that guides software teams through project-specific standards, processes, and procedures. Software projects are decomposed into all of their required process steps or tasks, and each task is assigned to project personnel. SDA orchestrates the performance of work required to complete all process tasks in the correct sequence. The software then notifies team members when they may begin work on their assigned tasks and provides the tools, instructions, reference materials, and supportive artifacts that allow users to compliantly perform the work. A combination of technology components captures and enacts any software process use to support the software lifecycle. It creates an adaptive workflow environment that can be modified as needed. SDA achieves software process automation through a Business Process Management (BPM) approach to managing the software lifecycle for mission-critical projects. It contains five main parts: TieFlow (workflow engine), Business Rules (rules to alter process flow), Common Repository (storage for project artifacts, versions, history, schedules, etc.), SOA (interface to allow internal, GFE, or COTS tools integration), and the Web Portal Interface (collaborative web environment

The Future Labor Force and Workplace and the Scientific and Engineering Workforce: Implications for Society and Business and Potential Solutions.

ERIC Educational Resources Information Center

Lightle, Juliana

This report examines the future shortages of scientists and engineers and suggests potential solutions to the shortage. The first section presents general demographic data and trends and interprets what this information suggests for the future economy and business in general. The second section considers the supply of physical scientists and…

Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Thomas, Dale; Smith, Charles; Thomas, Leann; Kittredge, Sheryl

2002-01-01

The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd-generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Thomas, Dale; Smith, Charles; Thomas, Leann; Kittredge, Sheryl

2002-01-01

The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

Extracting Inter-business Relationship from World Wide Web

NASA Astrophysics Data System (ADS)

Jin, Yingzi; Matsuo, Yutaka; Ishizuka, Mitsuru

Social relation plays an important role in a real community. Interaction patterns reveal relations among actors (such as persons, groups, companies), which can be merged into valuable information as a network structure. In this paper, we propose a new approach to extract inter-business relationship from the Web. Extraction of relation between a pair of companies is realized by using a search engine and text processing. Since names of companies co-appear coincidentaly on the Web, we propose an advanced algorithm which is characterized by addition of keywords (or we call relation words) to a query. The relation words are obtained from either an annotated corpus or the Web. We show some examples and comprehensive evaluations on our approach.

ECM soldering technologies for small businesses. Final report/project accomplishments summary, project number 93-KCPP-015-E1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Becka, G.A.

1997-03-01

The purpose of this outreach project was to demonstrate, transfer, and educate multiple small and medium-sized US firms in the methodology and technology of environmentally conscious manufacturing soldering techniques. Consultation on replacement solvents for ozone-depleting chemicals, low residue/no clean soldering, and lead-free solder alloys were examples of available FM and T expertise. Depending upon the needs, materials engineering or process engineering help was made available under the program. Requesting businesses could obtain up to 250 hours of assistance from AlliedSignal FM and T on these efforts. The participating companies mainly requested assistance with their immediate needs. Examples of assistance providedmore » included specialized training for their particular product line. FM and T Solder Certification School has an excellent reputation and responded with solder training and help with course outlines for the requesters. One company reported problems soldering certain components. FM and T evaluations determined that the company was received components with solderability levels that did not meet specification rather than experiencing a soldering process problem. Other companies received assistance in incorporating lead-free soldering materials into their production lines and development assistance with fluxless soldering processes. The project was terminated when it was determined that this need could be served by FM and T`s current Technical Assistance Program.« less

Graduate Education in a Small Business Environment

NASA Astrophysics Data System (ADS)

Bering, E. A., III; Longmier, B.; Giambusso, M.

2015-12-01

This paper reports on the issues that confront a professor when supervising graduate students and postdocs whose research work is done on site at a small business. The advantages include relative freedom from having to write proposals; the excitement of working on topics that have clear, direct uses; more extensive engineering support than many students get; and hands on day to day mentoring from the rest of the team. Students get direct instruction in technology transfer and small business processes. The disadvantages include isolation from the rest of the students in your Department and campus life, physical isolation from resources such as the seminar program, library, health center, and other student services. In addition, students who need "introduction to research" practicum instruction in electronics and computer skills will not do well. Finally, care must be taken to avoid including proprietary data in the core argument of the work.

Development of InCVAX as a novel in situ autologous vaccine for metastatic cancers (Conference Presentation)

NASA Astrophysics Data System (ADS)

Hode, Tomas; Alleruzzo, Luciano; Raker, Joseph; Lam, Samuel Siu Kit; Nordquist, Robert E.; Chen, Wei R.

2016-03-01

A novel method, an in situ autologous whole-cell cancer vaccine (inCVAX), is being developed by Immunophotonics, Inc., for the treatment of metastatic cancers. inCVAX combines phototherapy and immunotherapy to potentially induce a systemic anti-tumor immune response in the hosts. Immunophotonics and its academic partners have spent years conducting nonclinical research, developing CMC techniques and conducting clinical research. In 2015 the company initiated a late-stage (II/III) clinical trial in South America for advanced breast cancer patients. The process of developing the inCVAX approach from a laboratory setting into clinical trials requires significant efforts from a group of dedicated engineers, scientists, and physicians. The growth of the company and its business advances demonstrated the determination of a group of visionary investors, entrepreneurs, and business leaders. This talk will chronicle the milestones of the scientific achievement, medical progress, and business development of Immunophotonics.

An Ethical (Descriptive) Framework for Judgment of Actions and Decisions in the Construction Industry and Engineering-Part I.

PubMed

Alkhatib, Omar J; Abdou, Alaa

2018-04-01

The construction industry is usually characterized as a fragmented system of multiple-organizational entities in which members from different technical backgrounds and moral values join together to develop a particular business or project. The greatest challenge in the construction process for the achievement of a successful practice is the development of an outstanding reputation, which is built on identifying and applying an ethical framework. This framework should reflect a common ethical ground for myriad people involved in this process to survive and compete ethically in today's turbulent construction market. This study establishes a framework for ethical judgment of behavior and actions conducted in the construction process. The framework was primarily developed based on the essential attributes of business management identified in the literature review and subsequently incorporates additional attributes identified to prevent breaches in the construction industry and common ethical values related to professional engineering. The proposed judgment framework is based primarily on the ethical dimension of professional responsibility. The Ethical Judgment Framework consists of descriptive approaches involving technical, professional, administrative, and miscellaneous terms. The framework provides the basis for judging actions as either ethical or unethical. Furthermore, the framework can be implemented as a form of preventive ethics, which would help avoid ethical dilemmas and moral allegations. The framework can be considered a decision-making model to guide actions and improve the ethical reasoning process that would help individuals think through possible implications and consequences of ethical dilemmas in the construction industry.

Life Cycle Systems Engineering Approach to NASA's 2nd Generation Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Thomas, Dale; Smith, Charles; Safie, Fayssal; Kittredge, Sheryl

2002-01-01

The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd- generation system by 2 orders of magnitude - equivalent to a crew risk of 1 -in- 10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. Given a candidate architecture that possesses credible physical processes and realistic technology assumptions, the next set of analyses address the system's functionality across the spread of operational scenarios characterized by the design reference missions. The safety/reliability and cost/economics associated with operating the system will also be modeled and analyzed to answer the questions "How safe is it?" and "How much will it cost to acquire and operate?" The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

Positioning of Engineer Ethics from the Standpoint of a Company. And the Ethics Education Towards Practice

NASA Astrophysics Data System (ADS)

Sato, Masaki

The purpose of a company is contribution to society by operating activities. Therefore, it has a company principle and “Business ethics” conduct codes in each. On the other hand, many engineers with specialties are performing business toward the same purpose at the same company. And it will produce new inconsistency by introducing “Engineer ethics” and “the ethics of each professional” all at once in the situation of that company. Then, the engineer ethics education in company needs to carry out by arranging company conduct codes and Engineer ethics. This paper proposes what the company ethics education should be from exemplifying results by make activities and engineer ethics education of the corporate ethics observance in the Tokyo Electric Power Co., Inc.

Adapting Rational Unified Process (RUP) approach in designing a secure e-Tendering model

NASA Astrophysics Data System (ADS)

Mohd, Haslina; Robie, Muhammad Afdhal Muhammad; Baharom, Fauziah; Darus, Norida Muhd; Saip, Mohamed Ali; Yasin, Azman

2016-08-01

e-Tendering is an electronic processing of the tender document via internet and allow tenderer to publish, communicate, access, receive and submit all tender related information and documentation via internet. This study aims to design the e-Tendering system using Rational Unified Process approach. RUP provides a disciplined approach on how to assign tasks and responsibilities within the software development process. RUP has four phases that can assist researchers to adjust the requirements of various projects with different scope, problem and the size of projects. RUP is characterized as a use case driven, architecture centered, iterative and incremental process model. However the scope of this study only focusing on Inception and Elaboration phases as step to develop the model and perform only three of nine workflows (business modeling, requirements, analysis and design). RUP has a strong focus on documents and the activities in the inception and elaboration phases mainly concern the creation of diagrams and writing of textual descriptions. The UML notation and the software program, Star UML are used to support the design of e-Tendering. The e-Tendering design based on the RUP approach can contribute to e-Tendering developers and researchers in e-Tendering domain. In addition, this study also shows that the RUP is one of the best system development methodology that can be used as one of the research methodology in Software Engineering domain related to secured design of any observed application. This methodology has been tested in various studies in certain domains, such as in Simulation-based Decision Support, Security Requirement Engineering, Business Modeling and Secure System Requirement, and so forth. As a conclusion, these studies showed that the RUP one of a good research methodology that can be adapted in any Software Engineering (SE) research domain that required a few artifacts to be generated such as use case modeling, misuse case modeling, activity diagram, and initial class diagram from a list of requirements as identified earlier by the SE researchers

Application of a data base management system to a finite element model

NASA Technical Reports Server (NTRS)

Rogers, J. L., Jr.

1980-01-01

In today's software market, much effort is being expended on the development of data base management systems (DBMS). Most commercially available DBMS were designed for business use. However, the need for such systems within the engineering and scientific communities is becoming apparent. A potential DBMS application that appears attractive is the handling of data for finite element engineering models. The applications of a commercially available, business-oriented DBMS to a structural engineering, finite element model is explored. The model, DBMS, an approach to using the DBMS, advantages and disadvantages are described. Plans for research on a scientific and engineering DBMS are discussed.

Product Lifecycle Management and the Quest for Sustainable Space Exploration Solutions

NASA Technical Reports Server (NTRS)

Caruso, Pamela W.; Dumbacher, Daniel L.; Grieves, Michael

2011-01-01

Product Lifecycle Management (PLM) is an outcome of lean thinking to eliminate waste and increase productivity. PLM is inextricably tied to the systems engineering business philosophy, coupled with a methodology by which personnel, processes and practices, and information technology combine to form an architecture platform for product design, development, manufacturing, operations, and decommissioning. In this model, which is being implemented by the Marshall Space Flight Center (MSFC) Engineering Directorate, total lifecycle costs are important variables for critical decision-making. With the ultimate goal to deliver quality products that meet or exceed requirements on time and within budget, PLM is a powerful concept to shape everything from engineering trade studies and testing goals, to integrated vehicle operations and retirement scenarios. This briefing will demonstrate how the MSFC Engineering Directorate is implementing PLM as part of an overall strategy to deliver safe, reliable, and affordable space exploration solutions and how that strategy aligns with the Agency and Center systems engineering policies and processes. Sustainable space exploration solutions demand that all lifecycle phases be optimized, and engineering the next generation space transportation system requires a paradigm shift such that digital tools and knowledge management, which are central elements of PLM, are used consistently to maximum effect. Adopting PLM, which has been used by the aerospace and automotive industry for many years, for spacecraft applications provides a foundation for strong, disciplined systems engineering and accountable return on investment. PLM enables better solutions using fewer resources by making lifecycle considerations in an integrative decision-making process.

Software Development Standard Processes (SDSP)

NASA Technical Reports Server (NTRS)

Lavin, Milton L.; Wang, James J.; Morillo, Ronald; Mayer, John T.; Jamshidian, Barzia; Shimizu, Kenneth J.; Wilkinson, Belinda M.; Hihn, Jairus M.; Borgen, Rosana B.; Meyer, Kenneth N.;

Supersonic cruise vehicle research/business jet

NASA Technical Reports Server (NTRS)

Kelly, R. J.

1980-01-01

A comparison study of a GE-21 variable propulsion system with a Multimode Integrated Propulsion System (MMIPS) was conducted while installed in small M = 2.7 supersonic cruise vehicles with military and business jet possibilities. The 1984 state of the art vehicles were sized to the same transatlantic range, takeoff distance, and sideline noise. The results indicate the MMIPS would result in a heavier vehicle with better subsonic cruise performance. The MMIPS arrangement with one fan engine and two satellite turbojet engines would not be appropriate for a small supersonic business jet because of design integration penalties and lack of redundancy.

Prize for Industrial Applications of Physics Lecture: A physicist in Business

NASA Astrophysics Data System (ADS)

Woollam, John

2013-03-01

In the 1980s I inherited a famous ellipsometry laboratory. To speed up data acquisition and analysis I associated myself with creative scientists and engineers. We started a company which grew. Together we rapidly improved acquisition speed, accuracy, precision, spectral range, and types of applications. Yet, a business is much more than technology. In this talk I outline how a high-tech business functions, and illustrate the role of physicists and engineers in making a company successful. It is fast-paced, exciting, and enormously gratifying to provide quality instruments for researchers and industry.

Competitive Intelligence on the Internet-Going for the Gold.

ERIC Educational Resources Information Center

Kassler, Helene

2000-01-01

Discussion of competitive intelligence (CI) focuses on recent Web sties and several search techniques that provide valuable CI information. Highlights include links that display business relationships; information from vendors; general business sites; search engine strategies; local business newspapers; job postings; patent and trademark…

On Roles of Models in Information Systems

NASA Astrophysics Data System (ADS)

Sølvberg, Arne

The increasing penetration of computers into all aspects of human activity makes it desirable that the interplay among software, data and the domains where computers are applied is made more transparent. An approach to this end is to explicitly relate the modeling concepts of the domains, e.g., natural science, technology and business, to the modeling concepts of software and data. This may make it simpler to build comprehensible integrated models of the interactions between computers and non-computers, e.g., interaction among computers, people, physical processes, biological processes, and administrative processes. This chapter contains an analysis of various facets of the modeling environment for information systems engineering. The lack of satisfactory conceptual modeling tools seems to be central to the unsatisfactory state-of-the-art in establishing information systems. The chapter contains a proposal for defining a concept of information that is relevant to information systems engineering.

Aerodynamic design optimization of a fuel efficient high-performance, single-engine, business airplane

NASA Technical Reports Server (NTRS)

Holmes, B. J.

1980-01-01

A design study has been conducted to optimize a single-engine airplane for a high-performance cruise mission. The mission analyzed included a cruise speed of about 300 knots, a cruise range of about 1300 nautical miles, and a six-passenger payload (5340 N (1200 lb)). The purpose of the study is to investigate the combinations of wing design, engine, and operating altitude required for the mission. The results show that these mission performance characteristics can be achieved with fuel efficiencies competitive with present-day high-performance, single- and twin-engine, business airplanes. It is noted that relaxation of the present Federal Aviation Regulation, Part 23, stall-speed requirement for single-engine airplanes facilitates the optimization of the airplane for fuel efficiency.

Assessment of advanced technologies for high performance single-engine business airplanes

NASA Technical Reports Server (NTRS)

Kohlman, D. L.; Holmes, B. J.

1982-01-01

The prospects for significantly increasing the fuel efficiency and mission capability of single engine business aircraft through the incorporation of advanced propulsion, aerodynamics and materials technologies are explored. It is found that turbine engines cannot match the fuel economy of the heavier rotary, diesel and advanced spark reciprocating engines. The rotary engine yields the lightest and smallest aircraft for a given mission requirement, and also offers greater simplicity and a multifuel capability. Great promise is also seen in the use of composite material primary structures in conjunction with laminar flow wing surfaces, a pusher propeller and conventional wing-tail configuration. This study was conducted with the General Aviation Synthesis Program, which can furnish the most accurate mission performance calculations yet obtained.

Systems engineering in practice: can rigour and creativity co-exist?

NASA Astrophysics Data System (ADS)

Schnetler, Hermine; Rees, Philip; Egan, Ian

2006-06-01

Systems engineering as a discipline has been established for many years, being utilised to good effect most notably, in the defence industry. Its introduction in a formalised way to the UK ATC is relatively recent. Although a good start has been made in embedding the process within the lifecycle model, much work is still required to refine the systems engineering elements to cope with the complex (internationally collaborative) business model, the need to nurture creativity in the design process and the translation into a highly challenging cost-driven technology domain. This paper explores the current status of systems engineering at the UK ATC, shows where further work is needed, and how improvements can be made to meet the challenges of next generation telescopes and instrumentation. It is shown why the discipline is necessary, especially given that projects often comprise diverse global teams (both small and large), and it indicates the pitfalls of a tendency in the early stages of a project to focus on solutions rather than robust requirements capture. Finally, despite the obvious value and yet often ill-understood rigours of system engineering, it is shown how innovation and creativity can be promoted rather than stifled.

Risky Business

NASA Technical Reports Server (NTRS)

Yarbrough, Katherine

2015-01-01

During my internship I worked on two major projects, recommending improvements for the Center's Risk Management Workshop and helping with the strategic planning efforts for Safety and Mission Assurance (S&MA). The risk management improvements is the key project I worked on this semester through my internship, while the strategic planning is the secondary assignment. S&MA Business Office covers both aspects in its delegation, getting both spans some of the work done in the office. A risk is a future event with a negative consequence that has some probability of occurring. Safety and Mission Assurance identifies, analyzes, plans, and tracks risk. The directorate offers the Center a Risk Management Workshop, and part of the ongoing efforts of S&MA is to make continuous improvements to the RM Workshop. By using the Project Management Institute's (PMI) Standard for Risk Management, I performed a gap analysis to make improvements for our materials. I benchmarked the PMI's Risk Management Standard, compared our Risk Management Workshop materials to PMI's standard, and identified any gaps in our material. My major findings were presented to the Business Office of S&MA for a decision on whether or not to incorporate the improvements. These suggestions were made by attending JSC working group meetings, Health, Safety and Environment (HSE) panel reviews and various risk review meetings. The improvements provide better understanding of risk management processes and enhanced risk tracking knowledge and skills. Risk management is an integral part of any engineering discipline, getting exposed to this section of engineering will greatly help shape my career in the future. Johnson Space Center is a world leader in risk management processes; learning risk management here gives me a huge advantage over my peers, as well as understanding decision making in the context of risk management will help me to be a well-rounded engineer. Strategic planning is an area I had not previously studied. Helping with the strategic planning efforts in S&MA has taught me how organizations think and function as a whole. S&MA is adopting a balanced scorecard approach to strategic planning. As part of this planning method strategic themes, objectives, and initiatives are formed. I attended strategic theme team workshops that formed the strategy map for the directorate and gave shape to the plan. Also during these workshops the objectives were discussed and built. Learning the process for strategic planning has helped me better understand how organizations and businesses function, which also helps me to be a more effective employee. Other assignments I had during my internship included completing the Safety and Mission Assurance Technical Excellent Program (STEP) Level 1, as well as doing a two week rotation through the Space Exploration division in S&MA, specifically working with a thermal protection systems (TPS) engineer. While working there, I learned about the Orion capsule and the SpaceX Dragon cargo capsule. I attended meetings to prepare the engineers for the upcoming Critical Design Reviews for both capsules and reviewed test data. Learning risk management, strategic planning, and working in the Space Exploration division has taught me about many aspects of S&MA. My internship at NASA has given me new experiences and taught me numerous subjects that I would have otherwise not learned. This opportunity has expanded my educational horizons and is helping me to become a more useful engineer and employee.

Strategy for preventing the waste of human resources

NASA Astrophysics Data System (ADS)

Jones, William E.

1992-05-01

Rapid technological advances and the declining educational preparedness of industrial workers has established a need for new training strategies and initiatives regarding human resource development. The productivity, competitiveness, motivation, and creativity of our people determines whether our business enterprises succeed or fail during the next decade. Due to a change process that many organizations have undertaken to become more competitive toward the year 2000, many of the previous styles of engineering leadership that involves the management of projects and human resources require new approaches. It is also important to recognize that technology has its limits and a broader focus to include the human aspects of accomplishing jobs over the long term is more critical than ever before. More autonomy and the responsibility for broader practices by the professional staff requires that the professional worker operate differently. Business planning and development of the organization's future strategic intent requires a high priority on the human resource linkage to the business plans and strategies. A review of past practices to motivate the worker toward higher productivity clearly shows that past techniques are not as effective in today's work environment. Many practices of organizational and individual leadership don't fit today's approach of worker involvement because they were designed for administrative supervisory control processes. Therefore, if we are going to organize a business strategy that prevents the `waste of human resources,' we need to develop a strategy that is appropriate for the times which considers the attitude of the employees and their work environment. Having worked with scientists and engineers for the majority of my twenty-five year career, I know they see and appreciate the logic of a formula. A formula fits when developing a future strategy because a formula can become a model to enhance balanced planning. In this paper, I want to share this simple formula and illustrate how I have utilized it as a tool for workshop discussions, and human resources planning purposes.

From Business to Technological German.

ERIC Educational Resources Information Center

Rockwood, H. M.

Because many of the Georgia Institute of Technology students taking business German come from the sciences and engineering, the business language textbook used has been supplemented with more technologically oriented instructional materials. Highly technical texts are too advanced at the second year language learning stage, so one teacher selected…

An Analysis of Business Process Re-Engineering for Government Micro-Purchasing

DTIC Science & Technology

2014-09-01

45 B. AREAS FOR FURTHER RESEARCH .......................................................46 APPENDIX A. DEMINGS ’ 14 POINTS FOR THE TRANSFORMATION OF...operational effectiveness. This research was based on the teachings of W. Edwards Deming . The first case study directed by Naval Air Systems Command...9 Crosby, W. Edwards Deming , and Joseph M. Juran. They each had their own definition of TQM, but among these three experts, they agreed, “that it is

Is the work flow model a suitable candidate for an observatory supervisory control infrastructure?

NASA Astrophysics Data System (ADS)

Daly, Philip N.; Schumacher, Germán.

2016-08-01

This paper reports on the early investigation of using the work flow model for observatory infrastructure software. We researched several work ow engines and identified 3 for further detailed, study: Bonita BPM, Activiti and Taverna. We discuss the business process model and how it relates to observatory operations and identify a path finder exercise to further evaluate the applicability of these paradigms.

Adaptive Acquisition: An Evolving Framework for Tailoring Engineering and Procurement of Defense Systems

DTIC Science & Technology

2017-01-31

mapping critical business workflows and then optimizing them with appropriate evolutionary technology choices is often called “ Product Line Architecture... technologies , products , services, and processes, and the USG evaluates them against its 360o requirements objectives, and refines them as appropriate, clarity...in rapidly evolving technological domains (e.g. by applying best commercial practices for open standard product line architecture.) An MP might be

Methods Engineering Workshop for the Shipbuilding Industry

DTIC Science & Technology

1985-09-01

physiological process that reduces the performance capacity and motivation of humans sub- jected to excessive or repeated work stresses. fatigue allowance, Time...often involves basic business fundamentals, motivation , common sense, and the plain hard work of one person doing something. But the accomplishment that...utilize a batch mode form. ” (3) SERGE A. BIRN HAS A TRAINING SCHOOL IN CINCINNATI FOR MTM, MSD, MCD, MOTIVATION -PRODUCTIVITY , TIME STUDY, METHODS

Collaborative environments for capability-based planning

NASA Astrophysics Data System (ADS)

McQuay, William K.

2005-05-01

Distributed collaboration is an emerging technology for the 21st century that will significantly change how business is conducted in the defense and commercial sectors. Collaboration involves two or more geographically dispersed entities working together to create a "product" by sharing and exchanging data, information, and knowledge. A product is defined broadly to include, for example, writing a report, creating software, designing hardware, or implementing robust systems engineering and capability planning processes in an organization. Collaborative environments provide the framework and integrate models, simulations, domain specific tools, and virtual test beds to facilitate collaboration between the multiple disciplines needed in the enterprise. The Air Force Research Laboratory (AFRL) is conducting a leading edge program in developing distributed collaborative technologies targeted to the Air Force's implementation of systems engineering for a simulation-aided acquisition and capability-based planning. The research is focusing on the open systems agent-based framework, product and process modeling, structural architecture, and the integration technologies - the glue to integrate the software components. In past four years, two live assessment events have been conducted to demonstrate the technology in support of research for the Air Force Agile Acquisition initiatives. The AFRL Collaborative Environment concept will foster a major cultural change in how the acquisition, training, and operational communities conduct business.

Engineering Leadership Development Programs a Look at What Is Needed and What Is Being Done

ERIC Educational Resources Information Center

Crumpton-Young, Lesia; McCauley-Bush, Pamela; Rabelo, Luis; Meza, Katherine; Ferreras, Ana; Rodriguez, Betzaida; Millan, Angel; Miranda, David; Kelarestani, Misha

2010-01-01

"The Engineer of 2020: Visions of Engineering in the New Century," published by the National Academy of Engineering (NAE), discusses the importance of current and future engineering graduates possessing skills needed to solve business challenges. To ensure that future engineering graduates are adequately prepared, several universities and…

Small Engine Technology (SET) Task 24 Business and Regional Aircraft System Studies

NASA Technical Reports Server (NTRS)

Lieber, Lysbeth

2003-01-01

This final report has been prepared by Honeywell Engines & Systems, Phoenix, Arizona, a unit of Honeywell International Inc., documenting work performed during the period June 1999 through December 1999 for the National Aeronautics and Space Administration (NASA) Glenn Research Center, Cleveland, Ohio, under the Small Engine Technology (SET) Program, Contract No. NAS3-27483, Task Order 24, Business and Regional Aircraft System Studies. The work performed under SET Task 24 consisted of evaluating the noise reduction benefits compared to the baseline noise levels of representative 1992 technology aircraft, obtained by applying different combinations of noise reduction technologies to five business and regional aircraft configurations. This report focuses on the selection of the aircraft configurations and noise reduction technologies, the prediction of noise levels for those aircraft, and the comparison of the noise levels with those of the baseline aircraft.

Diversification and Challenges of Software Engineering Standards

NASA Technical Reports Server (NTRS)

Poon, Peter T.

1994-01-01

The author poses certain questions in this paper: 'In the future, should there be just one software engineering standards set? If so, how can we work towards that goal? What are the challenges of internationalizing standards?' Based on the author's personal view, the statement of his position is as follows: 'There should NOT be just one set of software engineering standards in the future. At the same time, there should NOT be the proliferation of standards, and the number of sets of standards should be kept to a minimum.It is important to understand the diversification of the areas which are spanned by the software engineering standards.' The author goes on to describe the diversification of processes, the diversification in the national and international character of standards organizations, the diversification of the professional organizations producing standards, the diversification of the types of businesses and industries, and the challenges of internationalizing standards.

Preparing systems engineering and computing science students in disciplined methods, quantitative, and advanced statistical techniques to improve process performance

NASA Astrophysics Data System (ADS)

McCray, Wilmon Wil L., Jr.

The research was prompted by a need to conduct a study that assesses process improvement, quality management and analytical techniques taught to students in U.S. colleges and universities undergraduate and graduate systems engineering and the computing science discipline (e.g., software engineering, computer science, and information technology) degree programs during their academic training that can be applied to quantitatively manage processes for performance. Everyone involved in executing repeatable processes in the software and systems development lifecycle processes needs to become familiar with the concepts of quantitative management, statistical thinking, process improvement methods and how they relate to process-performance. Organizations are starting to embrace the de facto Software Engineering Institute (SEI) Capability Maturity Model Integration (CMMI RTM) Models as process improvement frameworks to improve business processes performance. High maturity process areas in the CMMI model imply the use of analytical, statistical, quantitative management techniques, and process performance modeling to identify and eliminate sources of variation, continually improve process-performance; reduce cost and predict future outcomes. The research study identifies and provides a detail discussion of the gap analysis findings of process improvement and quantitative analysis techniques taught in U.S. universities systems engineering and computing science degree programs, gaps that exist in the literature, and a comparison analysis which identifies the gaps that exist between the SEI's "healthy ingredients " of a process performance model and courses taught in U.S. universities degree program. The research also heightens awareness that academicians have conducted little research on applicable statistics and quantitative techniques that can be used to demonstrate high maturity as implied in the CMMI models. The research also includes a Monte Carlo simulation optimization model and dashboard that demonstrates the use of statistical methods, statistical process control, sensitivity analysis, quantitative and optimization techniques to establish a baseline and predict future customer satisfaction index scores (outcomes). The American Customer Satisfaction Index (ACSI) model and industry benchmarks were used as a framework for the simulation model.

Teaching Business Plan Negotiation: Fostering Entrepreneurship among Business and Engineering Students

ERIC Educational Resources Information Center

Ulijn, Jan M.; O'Duill, Micheal; Robertson, Stephen A.

2004-01-01

From personal relationships to complex business dealings, negotiations are essential forms of communication. But negotiation skills are often neglected in university courses. One reason for this neglect is the difficulty of teaching negotiations effectively. Such teaching requires both an underlying theoretical base and activities that provide…

Supporting interoperability of collaborative networks through engineering of a service-based Mediation Information System (MISE 2.0)

NASA Astrophysics Data System (ADS)

Benaben, Frederick; Mu, Wenxin; Boissel-Dallier, Nicolas; Barthe-Delanoe, Anne-Marie; Zribi, Sarah; Pingaud, Herve

2015-08-01

The Mediation Information System Engineering project is currently finishing its second iteration (MISE 2.0). The main objective of this scientific project is to provide any emerging collaborative situation with methods and tools to deploy a Mediation Information System (MIS). MISE 2.0 aims at defining and designing a service-based platform, dedicated to initiating and supporting the interoperability of collaborative situations among potential partners. This MISE 2.0 platform implements a model-driven engineering approach to the design of a service-oriented MIS dedicated to supporting the collaborative situation. This approach is structured in three layers, each providing their own key innovative points: (i) the gathering of individual and collaborative knowledge to provide appropriate collaborative business behaviour (key point: knowledge management, including semantics, exploitation and capitalisation), (ii) deployment of a mediation information system able to computerise the previously deduced collaborative processes (key point: the automatic generation of collaborative workflows, including connection with existing devices or services) (iii) the management of the agility of the obtained collaborative network of organisations (key point: supervision of collaborative situations and relevant exploitation of the gathered data). MISE covers business issues (through BPM), technical issues (through an SOA) and agility issues of collaborative situations (through EDA).

Visit from JAXA to NASA MSFC: The Engines Element & Ideas for Collaboration

NASA Technical Reports Server (NTRS)

Greene, William D.

2013-01-01

System Design, Development, and Fabrication: Design, develop, and fabricate or procure MB-60 component hardware compliant with the imposed technical requirements and in sufficient quantities to fulfill the overall MB-60 development effort. System Development, Assembly, and Test: Manage the scope of the development, assembly, and test-related activities for MB-60 development. This scope includes engine-level development planning, engine assembly and disassembly, test planning, engine testing, inspection, anomaly resolution, and development of necessary ground support equipment and special test equipment. System Integration: Provide coordinated integration in the realms of engineering, safety, quality, and manufacturing disciplines across the scope of the MB-60 design and associated products development Safety and Mission Assurance, structural design, fracture control, materials and processes, thermal analysis. Systems Engineering and Analysis: Manage and perform Systems Engineering and Analysis to provide rigor and structure to the overall design and development effort for the MB-60. Milestone reviews, requirements management, system analysis, program management support Program Management: Manage, plan, and coordinate the activities across all portions of the MB-60 work scope by providing direction for program administration, business management, and supplier management.

ISO 9000 and/or Systems Engineering Capability Maturity Model?

NASA Technical Reports Server (NTRS)

Gholston, Sampson E.

2002-01-01

For businesses and organizations to remain competitive today they must have processes and systems in place that will allow them to first identify customer needs and then develop products/processes that will meet or exceed the customers needs and expectations. Customer needs, once identified, are normally stated as requirements. Designers can then develop products/processes that will meet these requirements. Several functions, such as quality management and systems engineering management are used to assist product development teams in the development process. Both functions exist in all organizations and both have a similar objective, which is to ensure that developed processes will meet customer requirements. Are efforts in these organizations being duplicated? Are both functions needed by organizations? What are the similarities and differences between the functions listed above? ISO 9000 is an international standard of goods and services. It sets broad requirements for the assurance of quality and for management's involvement. It requires organizations to document the processes and to follow these documented processes. ISO 9000 gives customers assurance that the suppliers have control of the process for product development. Systems engineering can broadly be defined as a discipline that seeks to ensure that all requirements for a system are satisfied throughout the life of the system by preserving their interrelationship. The key activities of systems engineering include requirements analysis, functional analysis/allocation, design synthesis and verification, and system analysis and control. The systems engineering process, when followed properly, will lead to higher quality products, lower cost products, and shorter development cycles. The System Engineering Capability Maturity Model (SE-CMM) will allow companies to measure their system engineering capability and continuously improve those capabilities. ISO 9000 and SE-CMM seem to have a similar objective, which is to document the organization's processes and certify to potential customers the capability of a supplier to control the processes that determine the quality of the product or services being produced. The remaining sections of this report examine the differences and similarities between ISO 9000 and SE-CMM and make recommendations for implementation.

Applying CPR to a gas utility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowe, R.

1995-12-31

The latest management tool to hit the United States over the past five years is Core Process Re-engineering (CPR). Though not as radical a procedure as the well-known rescue method it shares an abbreviation with, it is viewed as the radical thinking of a business process. CPR has helped breathe new life into gas and electric utilities in recent years, which have been using it to find ways to increase customer satisfaction, decrease operating costs, reduce process time and/or increase quality. The first phase of a typical project identifies and reviews current processes and obtains information that can point outmore » re-engineering opportunities. The second phase involves the actual redesign of the current process. In this phase new teams may be formed, since the skill requirements are different (creative thinking becomes very important, for instance). Once alternatives are finalized and approved, the actual change process begins. Implementing all the recommendations can take several years, primarily because of labor and regulatory implications; therefore, planning the implementation is the most important part of the project. First, develop an overall implementation strategy. This overall strategy should address four major questions: What to implement? Who will implement? When to implement? How to implement? CPR is not an automatic solution to a problem. Any company wanting to expedite a CPR effort should consider the following factors: Align the CPR objectives to the overall company objectives; Ensure that senior management is actively involved and supports the CPR activities; Select the right team of people and ensure they are committed to the project; Develop a case for change and instill a sense of urgency in all the stakeholders; Focus on business results and not on specific activities; and Communicate, communicate, communicate.« less

Proceedings of the EMU Conference on Foreign Languages for Business and the Professions (Dearborn, Michigan, April 5-7, 1984). Part VII: German for Business and the Professions.

ERIC Educational Resources Information Center

Voght, Geoffrey M., Ed.

Part VII of the proceedings contains five presentations. They are: "German for the Professions: Specialized German for Engineering and the Sciences" (Hannelore Lehr); "German for Business and Economics: A Three-Level Program at Georgetown University" (Barbara Z. Harding); "German for Business and Economics: Criteria for Selection of Specialized…

Procurement engineering - the productivity factor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bargerstock, S.B.

1993-01-01

The industry is several years on the road to implementation of the Nuclear Management and Resources Council (NUMARC) initiatives on commercial-grade item dedication and procurement. Utilities have taken several approaches to involve engineering in the procurement process. A common result for the approaches is the additional operations and maintenance (O M) cost imposed by the added resource requirements. Procurement engineering productivity is a key element in controlling this business area. Experience shows that 400 to 500% improvements in productivity are possible with a 2-yr period. Improving the productivity of the procurement engineering function is important in today's competitive utility environment.more » Procurement engineering typically involves four distinct technical evaluation responsibilities along with several administrative areas. Technical evaluations include the functionally based safety classification of replacement components and parts (lacking a master parts list), the determination of dedication requirements for safety-related commercial-grade items, the preparation of a procurement specification to maintain the licensed design bases, and the equivalency evaluation of alternate items not requiring the design-change process. Administrative duties include obtaining technical review of vendor-supplied documentation, identifying obsolete parts and components, resolving material nonconformances, initiating the design-change process for replacement items (as needed), and providing technical support to O M. Although most utilities may not perform or require all the noted activities, a large percentage will apply to each utility station.« less

Transition of the Course Programs in the 40 Years History of Hitachi Institute of Technology

NASA Astrophysics Data System (ADS)

Miura, Osamu; Katsura, Koyo; Takahashi, Masahiko

In 2010, the Hitachi Institute of Technology reached the 40th anniversary. In the beginning, the institute stood at the product-out-oriented view point and carried out extensive technical education from basis to advanced technology. After the 1990s, transition of the business environment with the globalization caused that the needs of the engineer education required by the business sections have been transformed. As the result, the changes of needs have been reflected for course program of the institute. Nowadays, in addition to the conventional course programs, the engineer education programs for the business competency and human skill have also been focused.

Design study of technology requirements for high performance single-propeller-driven business airplanes

NASA Technical Reports Server (NTRS)

Kohlman, D. L.; Hammer, J.

1985-01-01

Developments in aerodyamic, structural and propulsion technologies which influence the potential for significant improvements in performance and fuel efficiency of general aviation business airplanes are discussed. The advancements include such technolgies as natural laminar flow, composite materials, and advanced intermittent combustion engines. The design goal for this parameter design study is a range of 1300 nm at 300 knots true airspeed with a payload of 1200lbs at 35,000 ft cruise altitude. The individual and synergistic effects of various advanced technologies on the optimization of this class of high performance, single engine, propeller driven business airplanes are identified.

Building bridges, breaking barriers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gonzalez, R.G.

1996-05-01

Communication is one of the most important factors in determining the success of any enterprise. It is certain to rise to the forefront for the international refining and petrochemical industries as companies seek continuous improvement in their operations. Most industry participants have recently undergone a wave of business process re-engineering, integrating new people with new practices in more areas than ever before. Companies have broken down the old functional organizations within the plant in favor of asset teams, placed renewed emphasis on optimizing profits across the entire downstream value chain and extended their global businesses to include joint venture partners.more » The goal is to empower people to make better decisions in a more timely manner to positively impact performance.« less

Towards Archetypes-Based Software Development

NASA Astrophysics Data System (ADS)

Piho, Gunnar; Roost, Mart; Perkins, David; Tepandi, Jaak

We present a framework for the archetypes based engineering of domains, requirements and software (Archetypes-Based Software Development, ABD). An archetype is defined as a primordial object that occurs consistently and universally in business domains and in business software systems. An archetype pattern is a collaboration of archetypes. Archetypes and archetype patterns are used to capture conceptual information into domain specific models that are utilized by ABD. The focus of ABD is on software factories - family-based development artefacts (domain specific languages, patterns, frameworks, tools, micro processes, and others) that can be used to build the family members. We demonstrate the usage of ABD for developing laboratory information management system (LIMS) software for the Clinical and Biomedical Proteomics Group, at the Leeds Institute of Molecular Medicine, University of Leeds.

26 CFR 1.414(r)-2 - Line of business.

Code of Federal Regulations, 2010 CFR

2010-04-01

... section. Example 6. Employer B is a diversified engineering firm offering civil, chemical, and aeronautical engineering services to government and private industry. Employer B provides no other property or... civil engineering services, a second providing all its chemical engineering services, a third providing...

26 CFR 1.414(r)-2 - Line of business.

Code of Federal Regulations, 2014 CFR

2014-04-01

... section. Example 6. Employer B is a diversified engineering firm offering civil, chemical, and aeronautical engineering services to government and private industry. Employer B provides no other property or... civil engineering services, a second providing all its chemical engineering services, a third providing...

26 CFR 1.414(r)-2 - Line of business.

Code of Federal Regulations, 2013 CFR

2013-04-01

... section. Example 6. Employer B is a diversified engineering firm offering civil, chemical, and aeronautical engineering services to government and private industry. Employer B provides no other property or... civil engineering services, a second providing all its chemical engineering services, a third providing...

26 CFR 1.414(r)-2 - Line of business.

Code of Federal Regulations, 2012 CFR

2012-04-01

... section. Example 6. Employer B is a diversified engineering firm offering civil, chemical, and aeronautical engineering services to government and private industry. Employer B provides no other property or... civil engineering services, a second providing all its chemical engineering services, a third providing...

26 CFR 1.414(r)-2 - Line of business.

Code of Federal Regulations, 2011 CFR

2011-04-01

... section. Example 6. Employer B is a diversified engineering firm offering civil, chemical, and aeronautical engineering services to government and private industry. Employer B provides no other property or... civil engineering services, a second providing all its chemical engineering services, a third providing...

78 FR 13286 - Sharing Certain Business Information Regarding the Introduction of Genetically Engineered...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-27

... Information Regarding the Introduction of Genetically Engineered Organisms With State and Tribal Government... proposing to amend our regulations regarding genetically engineered organisms regulated by the United States...). The regulations refer to such genetically engineered (GE) organisms and products as ``regulated...

Control of Total Ownership Costs of DoD Acquisition Development Programs Through Integrated Systems Engineering Processes and Metrics

DTIC Science & Technology

2011-04-30

Preface & Acknowledgements During his internship with the Graduate School of Business & Public Policy in June 2010, U.S. Air Force Academy Cadet...unlimited. Prepared for the Naval Postgraduate School , Monterey, California 93943 Disclaimer: The views represented in this report are those of the... School ,Monterey,CA,93943 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S

On implementing clinical decision support: achieving scalability and maintainability by combining business rules and ontologies.

PubMed

Kashyap, Vipul; Morales, Alfredo; Hongsermeier, Tonya

2006-01-01

We present an approach and architecture for implementing scalable and maintainable clinical decision support at the Partners HealthCare System. The architecture integrates a business rules engine that executes declarative if-then rules stored in a rule-base referencing objects and methods in a business object model. The rules engine executes object methods by invoking services implemented on the clinical data repository. Specialized inferences that support classification of data and instances into classes are identified and an approach to implement these inferences using an OWL based ontology engine is presented. Alternative representations of these specialized inferences as if-then rules or OWL axioms are explored and their impact on the scalability and maintenance of the system is presented. Architectural alternatives for integration of clinical decision support functionality with the invoking application and the underlying clinical data repository; and their associated trade-offs are discussed and presented.

13 CFR 305.4 - Projects for design and engineering work.

Code of Federal Regulations, 2014 CFR

2014-01-01

... engineering work. 305.4 Section 305.4 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION... and engineering work. In the case of Public Works Investment Assistance awarded solely for design and engineering work, the following additional application requirements and terms shall apply: (a) EDA may...

13 CFR 305.4 - Projects for design and engineering work.

Code of Federal Regulations, 2013 CFR

2013-01-01

... engineering work. 305.4 Section 305.4 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION... and engineering work. In the case of Public Works Investment Assistance awarded solely for design and engineering work, the following additional application requirements and terms shall apply: (a) EDA may...

13 CFR 305.4 - Projects for design and engineering work.

Code of Federal Regulations, 2010 CFR

2010-01-01

... engineering work. 305.4 Section 305.4 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION... and engineering work. In the case of Public Works Investment Assistance awarded solely for design and engineering work, the following additional application requirements and terms shall apply: (a) EDA may...

13 CFR 305.4 - Projects for design and engineering work.

Code of Federal Regulations, 2012 CFR

2012-01-01

... engineering work. 305.4 Section 305.4 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION... and engineering work. In the case of Public Works Investment Assistance awarded solely for design and engineering work, the following additional application requirements and terms shall apply: (a) EDA may...

13 CFR 305.4 - Projects for design and engineering work.

Code of Federal Regulations, 2011 CFR

2011-01-01

... engineering work. 305.4 Section 305.4 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION... and engineering work. In the case of Public Works Investment Assistance awarded solely for design and engineering work, the following additional application requirements and terms shall apply: (a) EDA may...

76 FR 10403 - Hewlett Packard (HP), Global Product Development, Engineering Workstation Refresh Team, Working...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-24

...), Global Product Development, Engineering Workstation Refresh Team, Working On-Site at General Motors... groups: The Non-Information Technology Business Development Team, the Engineering Application Support Team, and the Engineering Workstation Refresh Team. On February 2, 2011, the Department issued an...

77 FR 66771 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-07

... sending your comments electronically. Mail: Docket Management Facility, U.S. Department of Transportation... INFORMATION CONTACT: Frederick Zink, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller... the comment on behalf of an association, business, labor union, etc.). You may review the DOT's...

Developing hybrid near-space technologies for affordable access to suborbital space

NASA Astrophysics Data System (ADS)

Badders, Brian David

High power rockets and high altitude balloons are two near-space technologies that could be combined in order to provide access to the mesosphere and, eventually, suborbital space. This "rockoon" technology has been used by several large budget space programs before being abandoned in favor of even more expensive, albeit more accurate, ground launch systems. With the increased development of nano-satellites and atmospheric sensors, combined with rising interest in global atmospheric data, there is an increase in desire for affordable access to extreme altitudes that does not necessarily require the precision of ground launches. Development of hybrid near-space technologies for access to over 200k ft. on a small budget brings many challenges within engineering, systems integration, cost analysis, market analysis, and business planning. This research includes the design and simulation testing of all the systems needed for a safe and reusable launch system, the cost analysis for initial production, the development of a business plan, and the development of a marketing plan. This project has both engineering and scientific significance in that it can prove the space readiness of new technologies, raise their technology readiness levels (TRLs), expedite the development process, and also provide new data to the scientific community. It also has the ability to stimulate university involvement in the aerospace industry and help to inspire the next generation of workers in the space sector. Previous development of high altitude balloon/high power rocket hybrid systems have been undertaken by government funded military programs or large aerospace corporations with varying degrees of success. However, there has yet to be a successful flight with this type of system which provides access to the upper mesosphere in a university setting. This project will aim to design and analyze a viable system while testing the engineering process under challenging budgetary constraints. The technical, engineering, and systems integration challenges that will be investigated are rocket design, launch platform design, communications, ignition systems, recovery systems, and stabilization methods. This will be done using rocket performance simulation software, computer-aided design software, and computational fluid dynamic analysis software. The business planning is also an important part of this research. Through detailed market analysis, the needs for the proposed product/services being developed will be assessed. Through the combination of detailed cost analysis and the market needs, the economic viability of this launch system will be determined.

Gurus in the garage.

PubMed

Leonard, D; Swap, W

2000-01-01

Before the days of the Internet, it was primarily venture capitalists who coached young entrepreneurs in Silicon Valley. Today, because of the phenomenal number of new companies, venture capitalists are just too busy. The largest firms still take on a few carefully selected, highly promising zero-stage start-ups, but they simply can't spend the time on ones that aren't going to grow huge quickly. To fill the void, a new breed of adviser has stepped in to coach entrepreneurs. Called mentor capitalists, they help entrepreneurs with everything from recruiting top talent to attracting their first million in seed money. The mentor capitalists in Silicon Valley are cashed-out, highly successful business architects who no longer want to start businesses but who love the thrill of the entrepreneurial game. They spend hours and hours with first-time entrepreneurs, guiding them as they create and refine a business model, test their ideas in the marketplace, build business processes, raise money, and find talent. The authors of this article found through dozens of extensive interviews with entrepreneurs and their coaches that mentor capitalists play many roles: sculptor, psychologist, diplomat, kingmaker, talent magnet, process engineer, and rainmaker. In exchange for small equity stakes, the mentor capitalists wear these different hats, doling out expertise just in time, as situations arise, and in doses appropriate to the situation. Mentor capitalists seed Silicon Valley with expertise and knowledge, augmenting or even substituting for classes in entrepreneurship at local universities. But, as the authors note, the role of the mentor capitalist is essential to any start-up, anywhere.

Knowledge management through the e-learning approach - a case study of online engineering courses

NASA Astrophysics Data System (ADS)

Aichouni, Mohamed; Benchicou, Soraya; Nehari, Dris

2013-06-01

Though it is universally accepted that the face-to-face approach is the best way for education and training, however, with the advent of the information and communication technologies (mainly the World Wide Web) it became possible to enhance further the methods we are using to teach our students and to share the teaching material within a broaden engineering, technical and business communities. This paper is dedicated to making a review of the basic concepts of knowledge management and e-learning and to show how these two modern concepts can be integrated into engineering education to produce knowledge, disseminate it and share it within virtual interest groups and networks of engineering students, academic teachers and industrial engineers and technicians and business managers. A practical case study will be presented and discussed.

Two-stage commercial evaluation of engineering systems production projects for high-rise buildings

NASA Astrophysics Data System (ADS)

Bril, Aleksander; Kalinina, Olga; Levina, Anastasia

2018-03-01

The paper is devoted to the current and debatable problem of methodology of choosing the effective innovative enterprises for venture financing. A two-stage system of commercial innovation evaluation based on the UNIDO methodology is proposed. Engineering systems account for 25 to 40% of the cost of high-rise residential buildings. This proportion increases with the use of new construction technologies. Analysis of the construction market in Russia showed that the production of internal engineering systems elements based on innovative technologies has a growth trend. The production of simple elements is organized in small enterprises on the basis of new technologies. The most attractive for development is the use of venture financing of small innovative business. To improve the efficiency of these operations, the paper proposes a methodology for a two-stage evaluation of small business development projects. A two-stage system of commercial evaluation of innovative projects allows creating an information base for informed and coordinated decision-making on venture financing of enterprises that produce engineering systems elements for the construction business.

Engineering Students' Use of Computer Assisted Learning (CAL)

ERIC Educational Resources Information Center

Huczynski, Andrzej; Johnston, Scott Paul

2005-01-01

This study examines the use of Computer Assisted Learning (CAL) by undergraduate engineering students studying a business and management course. Discussing both the relationship between management and engineering and CAL applied to engineering education, this study is based on a survey of 82 undergraduates and adopts a quantitative research…

Engineering processes for the African VLBI network

NASA Astrophysics Data System (ADS)

Thondikulam, Venkatasubramani L.; Loots, Anita; Gaylard, Michael

2013-04-01

The African VLBI Network (AVN) is an initiative by the SKA-SA and HartRAO, business units of the National Research Foundation (NRF), Department of Science and Technology (DST), South Africa. The aim is to fill the existing gap of Very Long Baseline Interferometry (VLBI)-capable radio telescopes in the African continent by a combination of new build as well as conversion of large redundant telecommunication antennas through an Inter-Governmental collaborative programme in Science and Technology. The issue of human capital development in the Continent in the techniques of radio astronomy engineering and science is a strong force to drive the project and is expected to contribute significantly to the success of Square Kilometer Array (SKA) in the Continent.

Case Study of Engineering Risk in Automotive Industry

NASA Astrophysics Data System (ADS)

Popa, Dan Mihai

2018-03-01

The primary objective of this paper is to show where the engineering of risk management is placed and how its implementation has been tried in multinational companies in automotive industry from Romania. A large number of companies don't use a strategy to avoid the engineering risk in their design products. The main reason is not because these companies haven't heard about standards for risk management such as ISO 31000; the problem is that the business units which were summed up, have just set up a risk list at the beginning of the project, without any follow up. The purpose of this article is to create an implementation risk tracking in automotive industry companies in Romania, due to a change request from customers according to supply companies within the quality process, in the research and development phase.

Life cycle assessment of hybrid vehicles recycling: Comparison of three business lines of dismantling.

PubMed

Belboom, Sandra; Lewis, Grégory; Bareel, Pierre-François; Léonard, Angélique

2016-04-01

This paper undertakes an environmental evaluation of hybrid vehicles recycling, using industrial data from Comet Traitement SA in Belgium. Three business lines have been modelled and analysed. The first one is relative to the business as usual with a dismantling to recover batteries and engines followed by shredding and post shredding treatments. The second one considers, in addition, the removal of electronic control units (ECU) before shredding followed by same steps than in the first line and the last one is relative to the additional removal of big plastic parts before shredding and business as usual post shredding treatments. Results show non-significant environmental benefits when ECU or large parts of plastics are recovered before shredding. Improvements in terms of environmental benefits are lower than the uncertainty of the results. Indeed, the performing usual process for end-of-life vehicles (ELV) treatment reaches 97% of the ELV which is valorised in terms of metal and energy recoveries. Post shredding treatment units include metals, plastics and energy recovery of residues. Comet business as usual route for ELV valorisation is in accordance with the requirements of the European directive and recommendations for further improvement with dismantling of other parts (ECU or plastics) before shredding are non-relevant in this case. Copyright © 2016 Elsevier Ltd. All rights reserved.

NBAA business aviation fact book, 2003

DOT National Transportation Integrated Search

2003-01-01

Business aircraft are utilized by all types of people : and companies, from individuals who often fly rented, : single-engine, piston-powered airplanes, to sales : or management teams from the largest multinational : corporations, many of which own f...

Application of selected advanced technologies to high performance, single-engine, business airplanes

NASA Technical Reports Server (NTRS)

Domack, C. S.; Martin, G. L.

1984-01-01

Improvements in performance and fuel efficiency are evaluated for five new configurations of a six place, single turboprop, business airplane derived from a conventional, aluminum construction baseline aircraft. Results show the greatest performance gains for enhancements in natural laminar flow. A conceptual diesel engine provides greater fuel efficiency but reduced performance. Less significant effects are produced by the utilization of composite materials construction or by reconfiguration from tractor to pusher propeller installation.

Ten Most Searched Databases by a Business Generalist--Part 1 or A Day in the Life of....

ERIC Educational Resources Information Center

Meredith, Meri

1986-01-01

Describes databases frequently used in Business Information Center, Cummins Engine Company (Columbus, Indiana): Dun and Bradstreet Business Information Report System, Newsearch, Dun and Bradstreet Market Identifiers, Trade and Industry Index, PTS PROMT, Bureau of Labor Statistics files, ABI/INFORM, Magazine Index, NEXIS, Dow Jones News/Retrieval.…

Perspectives on the Past, Present, and Future in Computer-Related Areas as They Impact Academia, Business, and Other Areas

ERIC Educational Resources Information Center

Snyder, Robin M.

2017-01-01

The author has attended and presented at most ASCUE meetings since 1994, and has worked professionally in research and development, industry, military, government, business, and private and public academia--moving between computer science, software engineering, and business fields at both the undergraduate and graduate level, and even running…

3 CFR 8525 - Proclamation 8525 of May 20, 2010. Small Business Week, 2010

Code of Federal Regulations, 2011 CFR

2011-01-01

... Proclamation Small business owners embody the spirit of entrepreneurship and strong work ethic that lie at the... insurance to their employees, and gives entrepreneurs the security they need to innovate and take risks. We... of entrepreneurs and small businesses in our national life. They are the engine of our prosperity and...

Trends and Lessons Learned in Interdisciplinary and Non-Business Case Method Application.

ERIC Educational Resources Information Center

Anyansi-Archibong, Chi; Czuchry, Andrew J.; House, Claudia S.; Cicirello, Tony

2000-01-01

Presents results of a survey designed to test the level of development and application of cases in non-business courses such as sciences, mathematics, engineering, health, and technology. Findings support the growing popularity of the case method of teaching and learning outside the business domain. Suggests a framework for establishing win-win…

Search Engine Technology Impetus for the Knowledge Revolution in Business Education

ERIC Educational Resources Information Center

Hall, Owen P., Jr.

2004-01-01

Two equally powerful forces are helping shape the future of business education. First is the growing requirement for competent business managers on a worldwide basis. Second are the changing demands on our academic libraries as a result of the ongoing digital revolution. These dynamics call for new and innovative education systems such as…

26 CFR 1.448-2 - Nonaccrual of certain amounts by service providers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... described in § 1.448-1T(e)(4) (health, law, engineering, architecture, accounting, actuarial science... regarding acquisitions of a trade or business or a unit of a trade or business. (B) If interest or penalty... dispositions—(i) Acquisitions. If a taxpayer acquires the major portion of a trade or business of another...

Plastics disassembly versus bulk recycling: engineering design for end-of-life electronics resource recovery.

PubMed

Rios, Pedro; Stuart, Julie Ann; Grant, Ed

2003-12-01

Annual plastic flows through the business and consumer electronics manufacturing supply chain include nearly 3 billion lb of high-value engineering plastics derived from petroleum. The recovery of resource value from this stream presents critical challenges in areas of materials identification and recycling process design that demand new green engineering technologies applied together with life cycle assessment and ecological supply chain analysis to create viable plastics-to-plastics supply cycles. The sustainable recovery of potentially high-value engineering plastics streams requires that recyclers either avoid mixing plastic parts or purify later by separating smaller plastic pieces created in volume reduction (shredding) steps. Identification and separation constitute significant barriers in the plastics-to-plastics recycling value proposition. In the present work, we develop a model that accepts randomly arriving electronic products to study scenarios by which a recycler might identify and separate high-value engineering plastics as well as metals. Using discrete eventsimulation,we compare current mixed plastics recovery with spectrochemical plastic resin identification and subsequent sorting. Our results show that limited disassembly with whole-part identification can produce substantial yields in separated streams of recovered engineering thermoplastics. We find that disassembly with identification does not constitute a bottleneck, but rather, with relatively few workers, can be configured to pull the process and thus decrease maximum staging space requirements.

77 FR 34025 - Procurement List; Addition

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-08

..., Engineering Research & Development Center (ERDC), Construction Engineering Research Lab (CERL), 2902 Newmark... W2R2 Const Engrg Lab, Champaign, IL Patricia Briscoe, Deputy Director, Business Operations (Pricing and...

The Subject Matter of Process Improvement: A Topic and Reference Source for Software Engineering Educators and Trainers.

DTIC Science & Technology

1995-05-01

Random House Business Division, 1986. Ishikawa , Kaoru . What is Total Quality Control?: The Japanese Way. En- glewood Cliffs, NJ: Prentice-Hall...by drawing attention to the vital few truly important problems. Cause-and-effect diagrams. Also called fishbone and Ishikawa diagrams due to their...February 1994. 5.2 The Seeds [Aguayo 91] [Crosby 79] [Crosby 92] [Deming 86] [Fellers 92] [Gitlow 87] [Gluckman 93] [Imai 86] [ Ishikawa 85] [Juran

IEEE Computer Society/Software Engineering Institute Watts S. Humphrey Software Process Achievement (SPA) Award 2016: Nationwide

DTIC Science & Technology

2017-04-05

Information Technology at Nationwide v Abstract vi 1 Business Imperatives 1 1.1 Deliver the Right Work 1 1.2 Deliver the Right Way 1 1.3 Deliver with...an Engaged Workforce 1 2 Challenges and Opportunities 2 2.1 Responding to Demand 2 2.2 Standards and Capabilities 2 2.3 Information Technology ...release and unlimited distribution. Information Technology at Nationwide Nationwide Information Technology (IT) is comprised of seven offices

Developing knowledge intensive ideas in engineering education: the application of camp methodology

NASA Astrophysics Data System (ADS)

Heidemann Lassen, Astrid; Løwe Nielsen, Suna

2011-11-01

Background: Globalization, technological advancement, environmental problems, etc. challenge organizations not just to consider cost-effectiveness, but also to develop new ideas in order to build competitive advantages. Hence, methods to deliberately enhance creativity and facilitate its processes of development must also play a central role in engineering education. However, so far the engineering education literature provides little attention to the important discussion of how to develop knowledge intensive ideas based on creativity methods and concepts. Purpose: The purpose of this article is to investigate how to design creative camps from which knowledge intensive ideas can unfold. Design/method/sample: A framework on integration of creativity and knowledge intensity is first developed, and then tested through the planning, execution and evaluation of a specialized creativity camp with focus on supply chain management. Detailed documentation of the learning processes of the participating 49 engineering and business students is developed through repeated interviews during the process as well as a survey. Results: The research illustrates the process of development of ideas, and how the participants through interdisciplinary collaboration, cognitive flexibility and joint ownership develop highly innovative and knowledge-intensive ideas, with direct relevance for the four companies whose problems they address. Conclusions: The article demonstrates how the creativity camp methodology holds the potential of combining advanced academic knowledge and creativity, to produce knowledge intensive ideas, when the design is based on ideas of experiential learning as well as creativity principles. This makes the method a highly relevant learning approach for engineering students in the search for skills to both develop and implement innovative ideas.

26 CFR 20.2031-3 - Valuation of interests in businesses.

Code of Federal Regulations, 2010 CFR

2010-04-01

... AND GIFT TAXES ESTATE TAX; ESTATES OF DECEDENTS DYING AFTER AUGUST 16, 1954 Gross Estate § 20.2031-3... copies of reports of examinations of the business made by accountants, engineers, or any technical...

Acquisition Quality Improvement Within Naval Facilities Engineering Command Southwest

DTIC Science & Technology

2015-06-01

Act BMS Business Management System BPA Blanket Purchase Agreement COR Contracting Officer Representative CS Contract Specialist DASN...Services (MOPAS) missing in two service contract files. (2) Blanket Purchase Agreement ( BPA ) procedures were not followed. (3) Business

76 FR 61746 - Western Digital Technologies, Inc.: Hard Drive Development Engineering Group Irvine (Formerly at...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-05

... worker group at the Lake Forest, California facility. The investigation revealed that the business model... Forest, California facility, the subject firm asserted that the firm's business model calls for the...

Marshall Space Flight Center Engineering Directorate Overview: Launching the Future of Science and Exploration

NASA Technical Reports Server (NTRS)

Miley, Steven C.

2009-01-01

The Marshall Small Business Association (MSBA) serves as a central point of contact to inform and educate small businesses interested in pursuing contracting and subcontracting opportunities at the Marshall Space Flight Center. The MSBA meets quarterly to provide industry with information about how to do business with Marshall and to share specific information about Marshall s mission, which allows private businesses to envision how they might contribute. For the February 19 meeting, the Engineering Directorate will give an overview of its unique capabilities and how it is organized to provide maximum support for the programs and projects resident at Marshall, for example, the Space Shuttle Propulsion Office, Ares Projects Office, and Science and Mission Systems Office. This briefing provides a top-level summary of the work conducted by Marshall s largest organization, while explaining how resources are deployed to perform the volume of work under Marshall s purview.

Salary-Trend Studies of Faculty of the Years 1988-89 and 1991-92 in the Following Academic Disciplines/Major Fields: Accounting; Agribusiness and Agriproduction; Anthropology; Area and Ethnic Studies; Business Administration and Management; Business and Management; Business Economics; Chemistry; Communication Technologies; Communications; Computer and Information Sciences; Dramatic Arts; Drawing; Education; and Engineering.

ERIC Educational Resources Information Center

Howe, Richard D.; And Others

This volume provides comparative data for faculty salaries in public and private colleges, based on an annual survey of over 600 colleges and universities. Data cover the following disciplines: Accounting, Agribusiness and Agriproduction, Anthropology, Area and Ethnic Studies, Business Administration and Management, Business and Management,…

78 FR 77334 - Small Business Size Standards: Construction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-23

... Dredging and Surface Cleanup Activities, an ``exception'' under Other Heavy and Civil Engineering... ``exception'' under Other Heavy and Civil Engineering Construction (NAICS 238910), from $20 million to $30... exception under Other Heavy and Civil Engineering Construction (NAICS 238910) and retain the current size...

Performance Engineering as an Expert System.

ERIC Educational Resources Information Center

Harmon, Paul

1984-01-01

Considers three powerful techniques--heuristics, context trees, and search via backward chaining--that a knowledge engineer might employ to develop an expert system to automate performance engineering, i.e., the branch of instructional technology that focuses on the problems of business and industry. (MBR)

Consequence Prioritization Process for Potential High Consequence Events (HCE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freeman, Sarah G.

2016-10-31

This document describes the process for Consequence Prioritization, the first phase of the Consequence-Driven Cyber-Informed Engineering (CCE) framework. The primary goal of Consequence Prioritization is to identify potential disruptive events that would significantly inhibit an organization’s ability to provide the critical services and functions deemed fundamental to their business mission. These disruptive events, defined as High Consequence Events (HCE), include both events that have occurred or could be realized through an attack of critical infrastructure owner assets. While other efforts have been initiated to identify and mitigate disruptive events at the national security level, such as Presidential Policy Directive 41more » (PPD-41), this process is intended to be used by individual organizations to evaluate events that fall below the threshold for a national security. Described another way, Consequence Prioritization considers threats greater than those addressable by standard cyber-hygiene and includes the consideration of events that go beyond a traditional continuity of operations (COOP) perspective. Finally, Consequence Prioritization is most successful when organizations adopt a multi-disciplinary approach, engaging both cyber security and engineering expertise, as in-depth engineering perspectives are required to recognize and characterize and mitigate HCEs. Figure 1 provides a high-level overview of the prioritization process.« less

Business Re-Engineering: Lessons Learned From the U.S. Army Corps of Engineers Modernization Program

DTIC Science & Technology

1992-10-01

34Boeing Knocks Down the Wall Between the Dreamers and the Doers", Business , 28 Oct 1991, p. 120. "The Cost Based Activity Modeling Project...Whatever shortcomings this study may have - for which we take full responsibility, of course - the results have been immeasurably improved by their help...This was done with little or no high-level support or direction. The resulting "stovepipe" systems may have met the needs of individual functional groups

Tribal Resource Institute in Business, Engineering, and Science (T.R.I.B.E.S.). Part I, TRIBES Energy and Resource Management Simulation. Part II, Creative Writing--Essays submitted by the T.R.I.B.E.S. Students.

ERIC Educational Resources Information Center

Veirs, Val; And Others

The expository and creaive writing of Native American high school students enrolled in a summer program at Colorado College sponsored by TRIBES (Tribal Resource Institute in Business, Engineering, and Science) is featured in this document. Part 1 presents a simulation problem in energy and resource management followed by reports submitted by 28…

Today's utility business (or, Boy Scouts in the Temple of Mammon)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hyman, L.S.

1993-06-01

In the good old days of monopoly, it didn't matter so much how assets or liabilities were carried on the books. Today it matters very much. But in today's competitive environment it is even more important that utilities have a corporate strategy that takes advantage of their assets and is sensitive to both their customers and their competitors. In the good old days, electric utilities were natural monopolies. Regulators substituted their judgments for those of the marketplace, the utility's engineers managed the production process, its lawyers managed the regulators, and nobody managed the utility as a business. The utility wasmore » not a business. It was a quasi-governmental public service institution that - incidentally - threw off an ever-increasing dividend stream to shareholders who thought that they had purchased the equivalent of a bond that had an attached inflation hedge. The good old days are gone. The business is becoming a real one. Customers have choices. Yet the utility's accounting, managerial, and regulatory policies are rooted in the precepts of the old natural monopoly: the utility will always be the cheapest source of electricity, and customers will always need electricity.« less

Bottom Line Academia Conference Held at Washington, D. C. on 28 April 1983.

DTIC Science & Technology

1983-06-24

needed revolution in quality. Our business schools have virtually ignored the subject. So have our engineering schools with the possible exception of...begin now to include quality education in every curriculum of every discipline. Business schools must balance their focus on "financial management" with...business in the United States. In the last several years, a number of business schools have attempted to introduce courses in productivity and quality. The

Interactive training model of TRIZ for mechanical engineers in China

NASA Astrophysics Data System (ADS)

Tan, Runhua; Zhang, Huangao

2014-03-01

Innovation is a process of taking an original idea and converting it into a business value, in which the engineers face some inventive problems which can be solved hardly by experience. TRIZ, as a new theory for companies in China, provides both conceptual and procedural knowledge for finding and solving inventive problems. Because the government plays a leading role in the diffusion of TRIZ, too many companies from different industries are waiting to be trained, but the quantity of the trainers mastering TRIZ is incompatible with that requirement. In this context, to improve the training effect, an interactive training model of TRIZ for the mechanical engineers in China is developed and the implementation in the form of training classes is carried out. The training process is divided into 6 phases as follows: selecting engineers, training stage-1, finding problems, training stage-2, finding solutions and summing up. The government, TRIZ institutions and companies to join the programs interact during the process. The government initiates and monitors a project in form of a training class of TRIZ and selects companies to join the programs. Each selected companies choose a few engineers to join the class and supervises the training result. The TRIZ institutions design the training courses and carry out training curriculum. With the beginning of the class, an effective communication channel is established by means of interview, discussion face to face, E-mail, QQ and so on. After two years training practices, the results show that innovative abilities of the engineers to join and pass the final examinations increased distinctly, and most of companies joined the training class have taken congnizance of the power of TRIZ for product innovation. This research proposes an interactive training model of TRIZ for mechanical engineers in China to expedite the knowledge diffusion of TRIZ.

Engineering Technical Support Center (ETSC)

EPA Pesticide Factsheets

ETSC is EPA’s technical support and resource centers responsible for providing specialized scientific and engineering support to decision-makers in the Agency’s ten regional offices, states, communities, and local businesses.

The integration of quality function deployment and Kansei Engineering: An overview of application

NASA Astrophysics Data System (ADS)

Lokman, Anitawati Mohd; Awang, Ahmad Azran; Omar, Abdul Rahman; Abdullah, Nur Atiqah Sia

2016-02-01

As a result of today's globalized world and robust development of emerging markets, consumers are able to select from an endless number of products that are mostly similar in terms of design and properties, as well as equivalent in function and performance. The survival of businesses in a competitive ambience requires innovation, consumer loyalty, and products that are easily identifiable by consumers. Today's manufacturers have started to employ customer research instruments to survive in the highly industrialized world—for example, Conjoint Analysis, Design of Experiments and Semantic Design of Environment. However, this work only attempts to concentrate on Kansei Engineering and Quality Function Deployment. Kansei Engineering (KE) is deemed as the most appropriate method to link consumers' feelings, emotions or senses to the properties of a product because it translates people's impressions, interests, and feelings to the solutions of product design. Likewise, Quality Function Deployment (QFD) enables clearer interpretation of the needs of consumers, better concepts or products, and enhanced communication to internal operations that must then manufacture and deliver the product or services. The integration of both KE and QFD is believed possible, as many product manufacturers and businesses have started to utilize systematized methods to translate consumers' needs and wants into processes and products. Therefore, this work addresses areas of various integrations of KE and QFD processes in the industry, in an effort to assist an integration of KE and QFD. This work aims to provide evidence on the integration mechanism to enable successful incorporation of consumer's implicit feelings and demands into product quality improvement, and simultaneously providing an overview of both KE and QFD from the perspective of a novice.

An Analysis of Cloud Computing with Amazon Web Services for the Atmospheric Science Data Center

NASA Astrophysics Data System (ADS)

Gleason, J. L.; Little, M. M.

2013-12-01

NASA science and engineering efforts rely heavily on compute and data handling systems. The nature of NASA science data is such that it is not restricted to NASA users, instead it is widely shared across a globally distributed user community including scientists, educators, policy decision makers, and the public. Therefore NASA science computing is a candidate use case for cloud computing where compute resources are outsourced to an external vendor. Amazon Web Services (AWS) is a commercial cloud computing service developed to use excess computing capacity at Amazon, and potentially provides an alternative to costly and potentially underutilized dedicated acquisitions whenever NASA scientists or engineers require additional data processing. AWS desires to provide a simplified avenue for NASA scientists and researchers to share large, complex data sets with external partners and the public. AWS has been extensively used by JPL for a wide range of computing needs and was previously tested on a NASA Agency basis during the Nebula testing program. Its ability to support the Langley Science Directorate needs to be evaluated by integrating it with real world operational needs across NASA and the associated maturity that would come with that. The strengths and weaknesses of this architecture and its ability to support general science and engineering applications has been demonstrated during the previous testing. The Langley Office of the Chief Information Officer in partnership with the Atmospheric Sciences Data Center (ASDC) has established a pilot business interface to utilize AWS cloud computing resources on a organization and project level pay per use model. This poster discusses an effort to evaluate the feasibility of the pilot business interface from a project level perspective by specifically using a processing scenario involving the Clouds and Earth's Radiant Energy System (CERES) project.

14 CFR 1274.208 - Intellectual property.

Code of Federal Regulations, 2013 CFR

2013-01-01

... business organization for experimental, developmental, research, design or engineering work in support of... WITH COMMERCIAL FIRMS Pre-Award Requirements § 1274.208 Intellectual property. (a) Intellectual... similar arrangement) with a domestic nonprofit organization or a small business firm for experimental...

14 CFR 1274.208 - Intellectual property.

Code of Federal Regulations, 2010 CFR

2010-01-01

... business organization for experimental, developmental, research, design or engineering work in support of... WITH COMMERCIAL FIRMS Pre-Award Requirements § 1274.208 Intellectual property. (a) Intellectual... similar arrangement) with a domestic nonprofit organization or a small business firm for experimental...

14 CFR 1274.208 - Intellectual property.

Code of Federal Regulations, 2012 CFR

2012-01-01

... business organization for experimental, developmental, research, design or engineering work in support of... WITH COMMERCIAL FIRMS Pre-Award Requirements § 1274.208 Intellectual property. (a) Intellectual... similar arrangement) with a domestic nonprofit organization or a small business firm for experimental...

New business opportunity: Green field project with new technology

NASA Astrophysics Data System (ADS)

Lee, Seung Jae; Woo, Jong Hun; Shin, Jong Gye

2014-06-01

Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation technology.

Third Party Services for Enabling Business-to-Business Interactions

NASA Astrophysics Data System (ADS)

Shrivastava, Santosh

Business-to-business (B2B) interactions concerned with the fulfilment of a given business function (e.g., order processing) requires business partners to exchange electronic business documents and to act on them. This activity can be viewed as the business partners taking part in the execution of a shared business process, where each partner is responsible for performing their part in the process. Naturally, business process executions at each partner must be coordinated at run-time to ensure that the partners are performing mutually consistent actions (e.g., the seller is not hipping a product when the corresponding order has been cancelled by the buyer). A number of factors combine to make the task of business process coordination surprisingly hard:

Cost Effective Repair Techniques for Turbine Airfoils. Volume 2

DTIC Science & Technology

1979-04-01

BLADES , *GUIDE VANES , *REPAIR, TURBOFAN ENGINES , DIFFUSION BONDING, COST EFFECTIVENESS Identifiers: (U) * Turbine vanes , TF-39 engines , Activated...REPAIR TECHNIQUES FOR TURBINE AIRFOILS J. A. WEIN W. R. YOUNG GENERAL ELECTRIC COMPANY AIRCRAFT ENGINE GROUP CINCINNATI, OHIO 45215 APRIL 1979...Author: GENERAL ELECTRIC CO CINCINNATI OH AIRCRAFT ENGINE BUSINESS GROUP Unclassified Title: (U) Cost Effective Repair Techniques for

Concurrent and Collaborative Engineering Implementation in an R and D Organization

NASA Technical Reports Server (NTRS)

DelRosario, Ruben; Davis, Jose M.; Keys, L. Ken

2003-01-01

Concurrent Engineering (CE), and Collaborative Engineering (or Collaborative Product Development - CPD) have emerged as new paradigms with significant impact in the development of new products and processes. With documented and substantiated success in the automotive and technology industries CE and, most recently, CPD are being touted as innovative management philosophies for many other business sectors including Research and De- velopment. This paper introduces two independent research initiatives conducted at the NASA Glenn Research Center (GRC) in Cleveland, Ohio investigating the application of CE and CPD in an RdiD environment. Since little research has been conducted in the use of CE and CPD in sectors other than the high mass production manufacturing, the objective of these independent studies is to provide a systematic evaluation of the applicability of these paradigms (concur- rent and collaborative) in a low/no production, service environment, in particular R&D.

49 CFR 535.3 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION... for use in the applicable vehicles for each given model year. (b) Complete vehicle manufacturers, for... engines produced by small business manufacturers as defined by the Small Business Administration at 13 CFR...

14 CFR § 1274.208 - Intellectual property.

Code of Federal Regulations, 2014 CFR

2014-01-01

... business organization for experimental, developmental, research, design or engineering work in support of... AGREEMENTS WITH COMMERCIAL FIRMS Pre-Award Requirements § 1274.208 Intellectual property. (a) Intellectual... similar arrangement) with a domestic nonprofit organization or a small business firm for experimental...

77 FR 12884 - Agency Information Collection Activities: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-02

... colleges, universities, K-12 school systems, businesses, informal science organizations and other research... welfare by supporting research and education in all fields of science and engineering.'' NSF has had a... scientists, engineers, and science and engineering educators. NSF funds research and education in most fields...

Business Performer-Centered Design of User Interfaces

NASA Astrophysics Data System (ADS)

Sousa, Kênia; Vanderdonckt, Jean

Business Performer-Centered Design of User Interfaces is a new design methodology that adopts business process (BP) definition and a business performer perspective for managing the life cycle of user interfaces of enterprise systems. In this methodology, when the organization has a business process culture, the business processes of an organization are firstly defined according to a traditional methodology for this kind of artifact. These business processes are then transformed into a series of task models that represent the interactive parts of the business processes that will ultimately lead to interactive systems. When the organization has its enterprise systems, but not yet its business processes modeled, the user interfaces of the systems help derive tasks models, which are then used to derive the business processes. The double linking between a business process and a task model, and between a task model and a user interface model makes it possible to ensure traceability of the artifacts in multiple paths and enables a more active participation of business performers in analyzing the resulting user interfaces. In this paper, we outline how a human-perspective is used tied to a model-driven perspective.

Right-Rapid-Rough

NASA Technical Reports Server (NTRS)

Lawrence, Craig

2003-01-01

IDEO (pronounced 'eye-dee-oh') is an international design, engineering, and innovation firm that has developed thousands of products and services for clients across a wide range of industries. Its process and culture attracted the attention of academics, businesses, and journalists around the world, and are the subject of a bestselling book, The Art of Innovation by Tom Kelley. One of the keys to IDEO's success is its use of prototyping as a tool for rapid innovation. This story covers some of IDEO's projects, and gives reasons for why they were successful.

Novel Process Revolutionizes Welding Industry

NASA Technical Reports Server (NTRS)

2008-01-01

Glenn Research Center, Delphi Corporation, and the Michigan Research Institute entered into a research project to study the use of Deformation Resistance Welding (DRW) in the construction and repair of stationary structures with multiple geometries and dissimilar materials, such as those NASA might use on the Moon or Mars. Traditional welding technologies are burdened by significant business and engineering challenges, including high costs of equipment and labor, heat-affected zones, limited automation, and inconsistent quality. DRW addresses each of those issues, while drastically reducing welding, manufacturing, and maintenance costs.

Component Provider’s and Tool Developer’s Handbook. Central Archive for Reusable Defense Software (CARDS)

DTIC Science & Technology

1994-03-25

metrics [DISA93b]. " The Software Engineering Institute (SET) has developed a domain analysis process (Feature-Oriented Domain Analysis - FODA ) and is...and expresses the range of variability of these decisions. 3.2.2.3 Feature Oriented Domain Analysis Feature Oriented Domain Analysis ( FODA ) is a domain...documents created in this phase. From a purely profit-oriented business point of view, a company may develop its own analysis of a government or commercial

Proceedings of National Symposium on the Role of Academia in National Competitiveness and Total Quality Management (1st) Held in Morgantown, West Virginia on 18-20 July 1990

DTIC Science & Technology

1990-07-20

sciences: The engineering sciences have their roots in mathematics and basic sciences but carry knowledge further toward creative application. These studies...business, and government partnership to develop TQM as a process to improve national competitiveness. • Investigate and develop resources to implement...and develop TQM. 4 • Investigate and resolve TQM curriculum and accreditation issues. • Develop measurements to assess the effectiveness of TQM in the

Inventing our future: training the next generation of surgeon innovators.

PubMed

Krummel, Thomas M; Gertner, Michael; Makower, Josh; Milroy, Craig; Gurtner, Geoff; Woo, Russell; Riskin, Daniel J; Binyamin, Gary; Connor, Jessica Anne; Mery, Carlos M; Shafi, Bilal M; Yock, Paul G

2006-11-01

Current surgical care and technology has evolved over the centuries from the interplay between creative surgeons and new technologies. As both fields become more specialized, that interplay is threatened. A 2-year educational fellowship is described which teaches both the process and the discipline of medical/surgical device innovation. Multi-disciplinary teams (surgeons, engineers, business grads) are assembled to educate a generation of translators, who can bridge the gap between scientific and technologic advances and the needs of the physician and the patient.

Extracting business vocabularies from business process models: SBVR and BPMN standards-based approach

NASA Astrophysics Data System (ADS)

Skersys, Tomas; Butleris, Rimantas; Kapocius, Kestutis

2013-10-01

Approaches for the analysis and specification of business vocabularies and rules are very relevant topics in both Business Process Management and Information Systems Development disciplines. However, in common practice of Information Systems Development, the Business modeling activities still are of mostly empiric nature. In this paper, basic aspects of the approach for business vocabularies' semi-automated extraction from business process models are presented. The approach is based on novel business modeling-level OMG standards "Business Process Model and Notation" (BPMN) and "Semantics for Business Vocabularies and Business Rules" (SBVR), thus contributing to OMG's vision about Model-Driven Architecture (MDA) and to model-driven development in general.

The Art and Science of Storytelling in Presenting Complex Information to the Public, or, Give 'Em More Than Just the Facts

NASA Technical Reports Server (NTRS)

Sohus, Anita M.; Wessen, Alice S.

2004-01-01

In communicating science to the public, just the facts can leave the public baffled, bewildered, and bored. In communicating science to the public, we need to learn to tell the story, not just the facts. Science and engineering is serious business, requiring precise language and rigorous reporting of "just the facts." Yet, we believe this very code of integrity has contributed to a public image, at best, of scientists as eccentrics and engineers as geeks, and at worst, as elitist snobs who speak in secret codes. The very heart of the science process - open discussion and disagreement - often leaves the public with the impression that scientists don't know which way is up.

Study of Noise-Certification Standards for Aircraft Engines. Volume 1. Noise-Control Technology for Turbofan Engines.

DTIC Science & Technology

1983-06-01

28 2. TFE731 from Garrett Turbine Engine Company .... ............ 29 3. NASA QCGAT (Quiet, Clean General-Aviation Turbofan...engines, with as much as 3.67 for the Garrett TFE731 engine. Increasing the axial spacing between rotor and stator stages reduces turbo- machinery...envelope. Except for the TFE731 , none of the engines for business/executive jets had absorp- tive duct linings within the engine envelope. Because the

Forging Strategic Business Partnerships to Develop the 21st Century Workforce: A Case Study of the University of Houston's Undergraduate Petroleum Engineering Program

ERIC Educational Resources Information Center

Business-Higher Education Forum, 2013

2013-01-01

The Business-Higher Education Forum (BHEF) is committed to aligning education and the workforce to create the talent and capacity for innovation necessary to keep regions, states, and the nation economically competitive. As part of that work, BHEF strives to analyze the factors that contribute to effective business and higher education…

Effectively dealing with state and federal regulators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zebrowski, S.M.

1997-08-01

Environmental compliance is an essential part of every business practice in today`s world. For almost a quarter of a century, the nation has been involved in environmental restoration of contaminated sites. Over the years, the science and engineering required to remediate these sites has been developed and well documented. However, there is one major part of the environmental cleanup business that still alludes much of the regulated community. Communication skills required for successful project execution have not been well studied or documented. It is only in retrospect that man can look back on experiences and learn, then document how onemore » can better communicate with the regulators and stakeholders for future environmental compliance and cleanup work. The intent of this paper is to present the management skills learned from past experiences that would facilitate the effective communications between the regulated community, regulators and stakeholders during site remediation. Lessons learned from the past demonstrate that sometimes remediations are driven not solely by engineering and science, but also in part by emotions and politics. Other lessons demonstrate that communications with the regulators and stakeholders should begin very early in the remediation process.« less

National Electrical Code in Power Engineering Course for Electrical Engineering Curriculum

ERIC Educational Resources Information Center

Azizur, Rahman M. M.

2011-01-01

In order to ensure the safety of their inhabitants and properties, the residential, industrial and business installations require complying with NEC (national electrical code) for electrical systems. Electrical design engineers and technicians rely heavily on these very important design guidelines. However, these design guidelines are not formally…

STEM: Science Technology Engineering Mathematics

ERIC Educational Resources Information Center

Carnevale, Anthony P.; Smith, Nicole; Melton, Michelle

2011-01-01

The generative economic power and social influence of Science, Technology, Engineering, and Mathematics (STEM) has made the production of a capable science and engineering workforce a priority among business and policy leaders. They are rightly concerned that without a robust STEM workforce, the nation will become less competitive in the global…

26 CFR 1.263A-0 - Outline of regulations under section 263A.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Utilities. (O) Repairs and maintenance. (P) Engineering and design costs. (Q) Spoilage. (R) Tools and...) Engineering and design services. (F) Safety engineering services. (v) Accounting method change. (h) Simplified... mixed service costs. (7) Costs allocable to more than one business. (8) De minimis rule. (9) Separate...

26 CFR 1.263A-0 - Outline of regulations under section 263A.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) Utilities. (O) Repairs and maintenance. (P) Engineering and design costs. (Q) Spoilage. (R) Tools and...) Engineering and design services. (F) Safety engineering services. (v) Accounting method change. (h) Simplified... mixed service costs. (7) Costs allocable to more than one business. (8) De minimis rule. (9) Separate...

26 CFR 1.263A-0 - Outline of regulations under section 263A.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Utilities. (O) Repairs and maintenance. (P) Engineering and design costs. (Q) Spoilage. (R) Tools and...) Engineering and design services. (F) Safety engineering services. (v) Accounting method change. (h) Simplified... mixed service costs. (7) Costs allocable to more than one business. (8) De minimis rule. (9) Separate...

26 CFR 1.263A-0 - Outline of regulations under section 263A.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) Utilities. (O) Repairs and maintenance. (P) Engineering and design costs. (Q) Spoilage. (R) Tools and...) Engineering and design services. (F) Safety engineering services. (v) Accounting method change. (h) Simplified... mixed service costs. (7) Costs allocable to more than one business. (8) De minimis rule. (9) Separate...

Status of Social Engineering Awareness in Business Organizations and Colleges/Universities

ERIC Educational Resources Information Center

Hauser, Deanna Mae

2017-01-01

Social engineers manipulate individuals into divulging confidential information or compromising personal or organizational security. The purpose of this qualitative case study was to examine the potential lack of social engineering awareness that affects employees at companies in southeastern Michigan. The research method consisted of interviews…

26 CFR 31.3121(a)(1)-1 - Annual wage limitation.

Code of Federal Regulations, 2012 CFR

2012-04-01

... which is engaged in the manufacture of automobiles, including the manufacture of automobile engines, discontinues the manufacture of the engines and transfers all the property used in such manufacturing operation... business of the M Corporation, namely, its engine manufacturing unit. Example 2. The R Corporation which is...

26 CFR 31.3306(b)(1)-1 - $3,000 limitation.

Code of Federal Regulations, 2013 CFR

2013-04-01

.... The M Corporation which is engaged in the manufacture of automobiles, including the manufacture of automobile engines, discontinues the manufacture of the engines and transfers all the property used in such... trade or business of the M Corporation, namely, its engine manufacturing unit. Example 2. The R...

26 CFR 31.3306(b)(1)-1 - $3,000 limitation.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... The M Corporation which is engaged in the manufacture of automobiles, including the manufacture of automobile engines, discontinues the manufacture of the engines and transfers all the property used in such... trade or business of the M Corporation, namely, its engine manufacturing unit. Example 2. The R...

26 CFR 31.3121(a)(1)-1 - Annual wage limitation.

Code of Federal Regulations, 2011 CFR

2011-04-01

... which is engaged in the manufacture of automobiles, including the manufacture of automobile engines, discontinues the manufacture of the engines and transfers all the property used in such manufacturing operation... business of the M Corporation, namely, its engine manufacturing unit. Example 2. The R Corporation which is...

26 CFR 31.3121(a)(1)-1 - Annual wage limitation.

Code of Federal Regulations, 2013 CFR

2013-04-01

... which is engaged in the manufacture of automobiles, including the manufacture of automobile engines, discontinues the manufacture of the engines and transfers all the property used in such manufacturing operation... business of the M Corporation, namely, its engine manufacturing unit. Example 2. The R Corporation which is...

26 CFR 31.3306(b)(1)-1 - $3,000 limitation.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... The M Corporation which is engaged in the manufacture of automobiles, including the manufacture of automobile engines, discontinues the manufacture of the engines and transfers all the property used in such... trade or business of the M Corporation, namely, its engine manufacturing unit. Example 2. The R...

26 CFR 31.3306(b)(1)-1 - $3,000 limitation.

Code of Federal Regulations, 2011 CFR

2011-04-01

.... The M Corporation which is engaged in the manufacture of automobiles, including the manufacture of automobile engines, discontinues the manufacture of the engines and transfers all the property used in such... trade or business of the M Corporation, namely, its engine manufacturing unit. Example 2. The R...

26 CFR 31.3306(b)(1)-1 - $3,000 limitation.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... The M Corporation which is engaged in the manufacture of automobiles, including the manufacture of automobile engines, discontinues the manufacture of the engines and transfers all the property used in such... trade or business of the M Corporation, namely, its engine manufacturing unit. Example 2. The R...

26 CFR 31.3121(a)(1)-1 - Annual wage limitation.

Code of Federal Regulations, 2014 CFR

2014-04-01

... which is engaged in the manufacture of automobiles, including the manufacture of automobile engines, discontinues the manufacture of the engines and transfers all the property used in such manufacturing operation... business of the M Corporation, namely, its engine manufacturing unit. Example 2. The R Corporation which is...

Open Campus: Strategic Plan

DTIC Science & Technology

2016-05-01

The formal and informal interactions among scientists, engineers, and business and technology specialists fostered by this environment will lead...pathways for highly trained graduates of science, technology, engineering, and mathematics (STEM) academic programs, and help academic institutions...engineering and mathematics (STEM) disciplines relevant to ARL science and technology programs. Under EPAs, visiting students and professors

Incorporating Six Sigma Methodology Training into Chemical Engineering Education

ERIC Educational Resources Information Center

Dai, Lenore L.

2007-01-01

Six Sigma is a buzz term in today's technology and business world and there has been increasing interest to initiate Six Sigma training in college education. We have successfully incorporated Six Sigma methodology training into a traditional chemical engineering course, Engineering Experimentation, at Texas Tech University. The students have…

Busy test week

NASA Image and Video Library

2012-11-08

NASA engineer Andy Guymon studies data in the E-3 Test Stand Control Center at John C. Stennis Space Center during testing of NASA's Project Morpheus engine. Nov. 8. The test of the liquid oxygen, liquid methane engine was one of 27 conducted in Stennis' E Test Complex the week of Nov. 5.

Career Access Models: The Philadelphia Minorities in Engineering Consortium.

ERIC Educational Resources Information Center

McLaughlin, W. Barry

The Philadelphia Regional Introduction for Minorities to Engineering (PRIME) program, a nonprofit consortium of colleges, public schools, business/industry, government, and community agencies, is described. The pre-engineering program begins in the seventh grade and continues to track students through their college years. At the middle schools,…

75 FR 77570 - Airworthiness Directives; General Electric Company CF6 Series Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-13

... electronically. Mail: Docket Management Facility, U.S. Department of Transportation, 1200 New Jersey Avenue, SE...-2251. FOR FURTHER INFORMATION CONTACT: Tomasz Rakowski, Aerospace Engineer, Engine Certification Office... signed the comment on behalf of an association, business, labor union, etc.). You may review the DOT's...

Arctic Science, Engineering and Education. Awards: Fiscal Years 1987 and 1988.

ERIC Educational Resources Information Center

National Science Foundation, Washington, DC.

This document summarizes the dispersal of funds on Arctic research by the National Science Foundation during fiscal years 1987 and 1988. Major areas considered were: atmospheric sciences; oceanography; biological sciences; earth sciences; science and engineering education; small business research; engineering and permafrost; Arctic information and…

Modeling Business Processes in Public Administration

NASA Astrophysics Data System (ADS)

Repa, Vaclav

During more than 10 years of its existence business process modeling became a regular part of organization management practice. It is mostly regarded. as a part of information system development or even as a way to implement some supporting technology (for instance workflow system). Although I do not agree with such reduction of the real meaning of a business process, it is necessary to admit that information technologies play an essential role in business processes (see [1] for more information), Consequently, an information system is inseparable from a business process itself because it is a cornerstone of the general basic infrastructure of a business. This fact impacts on all dimensions of business process management. One of these dimensions is the methodology that postulates that the information systems development provide the business process management with exact methods and tools for modeling business processes. Also the methodology underlying the approach presented in this paper has its roots in the information systems development methodology.

Business Re-Engineering: Lessons Learned from the U.S. Army Corps of Engineers Modernization Program

DTIC Science & Technology

1992-06-01

and Management, Vol 7, 1984. Yang, Dori "Boeing Knocks Down the Wall Between the Dreamers and the Doers", Business Week, 28 Oct 1991, p. 12 0 . "The...Management (CIM) Initiative that have lead to a number of tools such as Activity Based Costing (ABC) and IDEF that may be used as building blocks for a re...Tung X. Bui 646-2630 AS/BD DD FORM 1473.84 MAR 83 APR edition may be used until exhausted SECURITY CLASSIFICATION OF THIS PAGE All other editions are

Model-driven Service Engineering with SoaML

NASA Astrophysics Data System (ADS)

Elvesæter, Brian; Carrez, Cyril; Mohagheghi, Parastoo; Berre, Arne-Jørgen; Johnsen, Svein G.; Solberg, Arnor

This chapter presents a model-driven service engineering (MDSE) methodology that uses OMG MDA specifications such as BMM, BPMN and SoaML to identify and specify services within a service-oriented architecture. The methodology takes advantage of business modelling practices and provides a guide to service modelling with SoaML. The presentation is case-driven and illuminated using the telecommunication example. The chapter focuses in particular on the use of the SoaML modelling language as a means for expressing service specifications that are aligned with business models and can be realized in different platform technologies.

The Perceptions of Change and Change Readiness in Junior and Senior Engineering & Technology Students

NASA Astrophysics Data System (ADS)

Moler, Perry J.

The purpose of this study was to understand what perceptions junior and senior engineering & technology students have about change, change readiness, and selected attributes, skills, and abilities. The selected attributes, skills, and abilities for this study were lifelong learning, leadership, and self-efficacy. The business environment of today is dynamic, with any number of internal and external events requiring an organization to adapt through the process of organizational development. Organizational developments affect businesses as a whole, but these developments are more evident in fields related to engineering and technology. Which require employees working through such developments be flexible and adaptable to a new professional environment. This study was an Explanatory Sequential Mixed Methods design, with Stage One being an online survey that collected individuals' perceptions of change, change readiness, and associated attributes, skills, and abilities. Stage Two was a face-to-face interview with a random sample of individuals who agreed to be interviewed in Stage One. This process was done to understand why students' perceptions are what they are. By using a mixed-method study, a more complete understanding of the current perceptions of students was developed, thus allowing external stakeholders' such as Human Resource managers more insight into the individuals they seek to recruit. The results from Stage One, one sample T-test with a predicted mean of 3.000 for this study indicated that engineering & technology students have a positive perceptions of Change Mean = 3.7024; Change Readiness Mean = 3.9313; Lifelong Learning Mean = 4.571; Leadership = 4.036; and Self-Efficacy Mean = 4.321. A One-way ANOVA was also conducted to understand the differences between traditional and non-traditional student regarding change and change readiness. The results of the ANOVA test indicated there were no significant differences between these two groups. The results from Stage Two showed that students perceived change as both positive and negative. This perception stems from their life experiences rather than from educational or professional experiences. The same can be said for the concepts of change readiness, lifelong learning, leadership, and self-efficacy. This indicates that engineering & technology programs should implement these concepts into their curriculum to better prepare engineering & technology students to enter into professional careers.

Leveraging Leadership for Better Business: A Look at Civil Engineering in the Air Force

DTIC Science & Technology

1999-12-05

What does it all mean ?" CE Quarterly Magazine article dated Winter 98 - "The Air Force Civil Engineer...Future" CE Quarterly Magazine article dated Winter 98 - "Civil Engineering Outsourcing: What does it all mean ?" CE Quarterly Magazine article dated...Engineering Outsourcing: What does it all mean ?" CE Quarterly Magazine article dated Winter 98 - "The Air Force Civil Engineer

Product Lifecycle Management and the Quest for Sustainable Space Explorations

NASA Technical Reports Server (NTRS)

Caruso, Pamela W.; Dumbacher, Daniel L.

2010-01-01

Product Lifecycle Management (PLM) is an outcome of lean thinking to eliminate waste and increase productivity. PLM is inextricably tied to the systems engineering business philosophy, coupled with a methodology by which personnel, processes and practices, and information technology combine to form an architecture platform for product design, development, manufacturing, operations, and decommissioning. In this model, which is being implemented by the Engineering Directorate at the National Aeronautics and Space Administration's (NASA's) Marshall Space Flight Center, total lifecycle costs are important variables for critical decision-making. With the ultimate goal to deliver quality products that meet or exceed requirements on time and within budget, PLM is a powerful concept to shape everything from engineering trade studies and testing goals, to integrated vehicle operations and retirement scenarios. This paper will demonstrate how the Engineering Directorate is implementing PLM as part of an overall strategy to deliver safe, reliable, and affordable space exploration solutions. It has been 30 years since the United States fielded the Space Shuttle. The next generation space transportation system requires a paradigm shift such that digital tools and knowledge management, which are central elements of PLM, are used consistently to maximum effect. The outcome is a better use of scarce resources, along with more focus on stakeholder and customer requirements, as a new portfolio of enabling tools becomes second nature to the workforce. This paper will use the design and manufacturing processes, which have transitioned to digital-based activities, to show how PLM supports the comprehensive systems engineering and integration function. It also will go through a launch countdown scenario where an anomaly is detected to show how the virtual vehicle created from paperless processes will help solve technical challenges and improve the likelihood of launching on schedule, with less hands-on labor needed for processing and troubleshooting.

Earth Science Mining Web Services

NASA Astrophysics Data System (ADS)

Pham, L. B.; Lynnes, C. S.; Hegde, M.; Graves, S.; Ramachandran, R.; Maskey, M.; Keiser, K.

2008-12-01

To allow scientists further capabilities in the area of data mining and web services, the Goddard Earth Sciences Data and Information Services Center (GES DISC) and researchers at the University of Alabama in Huntsville (UAH) have developed a system to mine data at the source without the need of network transfers. The system has been constructed by linking together several pre-existing technologies: the Simple Scalable Script-based Science Processor for Measurements (S4PM), a processing engine at the GES DISC; the Algorithm Development and Mining (ADaM) system, a data mining toolkit from UAH that can be configured in a variety of ways to create customized mining processes; ActiveBPEL, a workflow execution engine based on BPEL (Business Process Execution Language); XBaya, a graphical workflow composer; and the EOS Clearinghouse (ECHO). XBaya is used to construct an analysis workflow at UAH using ADaM components, which are also installed remotely at the GES DISC, wrapped as Web Services. The S4PM processing engine searches ECHO for data using space-time criteria, staging them to cache, allowing the ActiveBPEL engine to remotely orchestrates the processing workflow within S4PM. As mining is completed, the output is placed in an FTP holding area for the end user. The goals are to give users control over the data they want to process, while mining data at the data source using the server's resources rather than transferring the full volume over the internet. These diverse technologies have been infused into a functioning, distributed system with only minor changes to the underlying technologies. The key to this infusion is the loosely coupled, Web- Services based architecture: All of the participating components are accessible (one way or another) through (Simple Object Access Protocol) SOAP-based Web Services.

Earth Science Mining Web Services

NASA Technical Reports Server (NTRS)

Pham, Long; Lynnes, Christopher; Hegde, Mahabaleshwa; Graves, Sara; Ramachandran, Rahul; Maskey, Manil; Keiser, Ken

2008-01-01

To allow scientists further capabilities in the area of data mining and web services, the Goddard Earth Sciences Data and Information Services Center (GES DISC) and researchers at the University of Alabama in Huntsville (UAH) have developed a system to mine data at the source without the need of network transfers. The system has been constructed by linking together several pre-existing technologies: the Simple Scalable Script-based Science Processor for Measurements (S4PM), a processing engine at he GES DISC; the Algorithm Development and Mining (ADaM) system, a data mining toolkit from UAH that can be configured in a variety of ways to create customized mining processes; ActiveBPEL, a workflow execution engine based on BPEL (Business Process Execution Language); XBaya, a graphical workflow composer; and the EOS Clearinghouse (ECHO). XBaya is used to construct an analysis workflow at UAH using ADam components, which are also installed remotely at the GES DISC, wrapped as Web Services. The S4PM processing engine searches ECHO for data using space-time criteria, staging them to cache, allowing the ActiveBPEL engine to remotely orchestras the processing workflow within S4PM. As mining is completed, the output is placed in an FTP holding area for the end user. The goals are to give users control over the data they want to process, while mining data at the data source using the server's resources rather than transferring the full volume over the internet. These diverse technologies have been infused into a functioning, distributed system with only minor changes to the underlying technologies. The key to the infusion is the loosely coupled, Web-Services based architecture: All of the participating components are accessible (one way or another) through (Simple Object Access Protocol) SOAP-based Web Services.

32 CFR Appendix B to Part 286 - Addressing FOIA Requests

Code of Federal Regulations, 2010 CFR

2010-07-01

... (International & Commercial Programs) Deputy Under Secretary of Defense (Industrial Affairs & Installations... Research & Engineering Director, Small & Disadvantaged Business Utilization Director, Defense Procurement Director, Test Systems Engineering & Evaluation Director, Strategic & Tactical Systems DoD Radiation...

Curriculum Development for Technology-Based Entrepreneurship Education: A Cross-Disciplinary and Cross-Cultural Approach

ERIC Educational Resources Information Center

Kazakeviciute, Agne; Urbone, Renata; Petraite, Monika

2016-01-01

University-based entrepreneurship education is facing a paradigm shift between the classical "business school" and the contemporary cross-disciplinary "technology venturing" approach, mainly advocated by engineering schools and other communities outside business schools. The conflict is between structured "business…

76 FR 7153 - Secretarial Business Development Mission; Transportation Infrastructure/Multimodal Products and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-09

...- modal freight and intelligent supply chain management, provides significant business [[Page 7154..., including port development, airport development, freight rail systems and technologies, supply chain systems... for U.S. engineers, program management firms, and manufacturers to contribute to the creation of new...

Strategic Management or Strategic Planning for Defense?

DTIC Science & Technology

1989-02-01

manage at the regional or CinC level with an appreciation of strategic planning and management concepts currently taught at business schools . Military...those not in uniform. Science, engineering, and business schools all suggest that their faculties have experience tours so that they can appreciate

CrossTalk: The Journal of Defense Software Engineering. Volume 19, Number 5

DTIC Science & Technology

2006-05-01

Coming Events Web Sites Call for Articles Visit CrossTalk at the SSTC BackTalk Transforming: Business , Security ,Warfighting CrossTalk 76 SMXG CO-SPONSOR...theme “Transforming: Business , Security , Warfighting.” Transformation is not just the current buzzword: Many industries and the military have...systems. Transforming: Business , Security ,Warfighting Characteristic edocfosenilnoillim001-01eziS Number of external interfaces 30-300 Number of

Aspect-Oriented Business Process Modeling with AO4BPMN

NASA Astrophysics Data System (ADS)

Charfi, Anis; Müller, Heiko; Mezini, Mira

Many crosscutting concerns in business processes need to be addressed already at the business process modeling level such as compliance, auditing, billing, and separation of duties. However, existing business process modeling languages including OMG's Business Process Modeling Notation (BPMN) lack appropriate means for expressing such concerns in a modular way. In this paper, we motivate the need for aspect-oriented concepts in business process modeling languages and propose an aspect-oriented extension to BPMN called AO4BPMN. We also present a graphical editor supporting that extension.

Integrated Business Process Adaptation towards Friction-Free Business-to-Business Collaboration

ERIC Educational Resources Information Center

Shan, Zhe

2011-01-01

One key issue in process-aware E-commerce collaboration is the orchestration of business processes of multiple business partners throughout a supply chain network in an automated and seamless way. Since each partner has its own internal processes with different control flow structures and message interfaces, the real challenge lies in verifying…

Enhancing Student Learning of Enterprise Integration and Business Process Orientation through an ERP Business Simulation Game

ERIC Educational Resources Information Center

Seethamraju, Ravi

2011-01-01

The sophistication of the integrated world of work and increased recognition of business processes as critical corporate assets require graduates to develop "process orientation" and an "integrated view" of business. Responding to these dynamic changes in business organizations, business schools are also continuing to modify…

Articulating the Resources for Business Process Analysis and Design

ERIC Educational Resources Information Center

Jin, Yulong

2012-01-01

Effective process analysis and modeling are important phases of the business process management lifecycle. When many activities and multiple resources are involved, it is very difficult to build a correct business process specification. This dissertation provides a resource perspective of business processes. It aims at a better process analysis…

40 CFR 90.1003 - Prohibited acts.

Code of Federal Regulations, 2010 CFR

2010-07-01

... inventory of uncertified engines or Phase 1 engines beyond normal business practices to avoid or delay... model year in which less stringent standards under this part were in effect, shall not be subject to the... respects to a certified configuration of the same or later model year as the engine being replaced. (v) In...

Engineering Education on the "Fuzzy" Front End: A High-Technology Entrepreneurship Model

ERIC Educational Resources Information Center

Crawford, G. P.; Broer, D. J.; Bastiaansen, C. W. M.

2006-01-01

We have developed a university entrepreneurship program, culminating in a prototype and business plan, with five objectives: (1) value for all academic participants' (2) introduction to engineering issues for students; (3) refinement of engineering students' "soft" skills; (4) training for students in creating value out of embryonic ideas; and (5)…

The Big Bang: UK Young Scientists' and Engineers' Fair 2010

ERIC Educational Resources Information Center

Allison, Simon

2010-01-01

The Big Bang: UK Young Scientists' and Engineers' Fair is an annual three-day event designed to promote science, technology, engineering and maths (STEM) careers to young people aged 7-19 through experiential learning. It is supported by stakeholders from business and industry, government and the community, and brings together people from various…

75 FR 64681 - Airworthiness Directives; General Electric Company (GE) CF6-45 Series and CF6-50 Series Turbofan...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-20

... follow the instructions for sending your comments electronically. Mail: Docket Management Facility, U.S... J. Richards, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate... signed the comment on behalf of an association, business, labor union, etc.). You may review the DOT's...

Milestones of mathematical model for business process management related to cost estimate documentation in petroleum industry

NASA Astrophysics Data System (ADS)

Khamidullin, R. I.

2018-05-01

The paper is devoted to milestones of the optimal mathematical model for a business process related to cost estimate documentation compiled during construction and reconstruction of oil and gas facilities. It describes the study and analysis of fundamental issues in petroleum industry, which are caused by economic instability and deterioration of a business strategy. Business process management is presented as business process modeling aimed at the improvement of the studied business process, namely main criteria of optimization and recommendations for the improvement of the above-mentioned business model.

More Databases Searched by a Business Generalist--Part 2: A Veritable Cornucopia of Sources.

ERIC Educational Resources Information Center

Meredith, Meri

1986-01-01

This second installment describes databases irregularly searched in the Business Information Center, Cummins Engine Company (Columbus, Indiana). Highlights include typical research topics (happenings among similar manufacturers); government topics (Department of Defense contracts); market and industry topics; corporate intelligence; and personnel,…

23 CFR 635.107 - Participation by disadvantaged business enterprises.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Participation by disadvantaged business enterprises. 635.107 Section 635.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING... to compete. In accordance with Title VI of the Civil Rights Act of 1964, subsequent Federal-aid...

23 CFR 635.107 - Participation by disadvantaged business enterprises.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Participation by disadvantaged business enterprises. 635.107 Section 635.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING... to compete. In accordance with Title VI of the Civil Rights Act of 1964, subsequent Federal-aid...

23 CFR 635.107 - Participation by disadvantaged business enterprises.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Participation by disadvantaged business enterprises. 635.107 Section 635.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING... to compete. In accordance with Title VI of the Civil Rights Act of 1964, subsequent Federal-aid...

23 CFR 635.107 - Participation by disadvantaged business enterprises.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Participation by disadvantaged business enterprises. 635.107 Section 635.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING... to compete. In accordance with Title VI of the Civil Rights Act of 1964, subsequent Federal-aid...

23 CFR 635.107 - Participation by disadvantaged business enterprises.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Participation by disadvantaged business enterprises. 635.107 Section 635.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING... to compete. In accordance with Title VI of the Civil Rights Act of 1964, subsequent Federal-aid...

A system-of-systems modeling methodology for strategic general aviation design decision-making

NASA Astrophysics Data System (ADS)

Won, Henry Thome

General aviation has long been studied as a means of providing an on-demand "personal air vehicle" that bypasses the traffic at major commercial hubs. This thesis continues this research through development of a system of systems modeling methodology applicable to the selection of synergistic product concepts, market segments, and business models. From the perspective of the conceptual design engineer, the design and selection of future general aviation aircraft is complicated by the definition of constraints and requirements, and the tradeoffs among performance and cost aspects. Qualitative problem definition methods have been utilized, although their accuracy in determining specific requirement and metric values is uncertain. In industry, customers are surveyed, and business plans are created through a lengthy, iterative process. In recent years, techniques have developed for predicting the characteristics of US travel demand based on travel mode attributes, such as door-to-door time and ticket price. As of yet, these models treat the contributing systems---aircraft manufacturers and service providers---as independently variable assumptions. In this research, a methodology is developed which seeks to build a strategic design decision making environment through the construction of a system of systems model. The demonstrated implementation brings together models of the aircraft and manufacturer, the service provider, and most importantly the travel demand. Thus represented is the behavior of the consumers and the reactive behavior of the suppliers---the manufacturers and transportation service providers---in a common modeling framework. The results indicate an ability to guide the design process---specifically the selection of design requirements---through the optimization of "capability" metrics. Additionally, results indicate the ability to find synergetic solutions, that is solutions in which two systems might collaborate to achieve a better result than acting independently. Implementation of this methodology can afford engineers a more autonomous perspective in the concept exploration process, providing dynamic feedback about a design's potential success in specific market segments. The method also has potential to strengthen the connection between design and business departments, as well as between manufacturers, service providers, and infrastructure planners---bringing information about how the respective systems interact, and what might be done to improve synergism of systems.

Re-engineering the mission life cycle with ABC and IDEF

NASA Technical Reports Server (NTRS)

Mandl, Daniel; Rackley, Michael; Karlin, Jay

1994-01-01

The theory behind re-engineering a business process is to remove the non-value added activities thereby lowering the process cost. In order to achieve this, one must be able to identify where the non-value added elements are located which is not a trivial task. This is because the non-value added elements are often hidden in the form of overhead and/or pooled resources. In order to be able to isolate these non-value added processes from among the other processes, one must first decompose the overall top level process into lower layers of sub-processes. In addition, costing data must be assigned to each sub-process along with the value the sub-process adds towards the final product. IDEF0 is a Federal Information Processing Standard (FIPS) process-modeling tool that allows for this functional decomposition through structured analysis. In addition, it illustrates the relationship of the process and the value added to the product or service. The value added portion is further defined in IDEF1X which is an entity relationship diagramming tool. The entity relationship model is the blueprint of the product as it moves along the 'assembly line' and therefore relates all of the parts to each other and the final product. It also relates the parts to the tools that produce the product and all of the paper work that is used in their acquisition. The use of IDEF therefore facilitates the use of Activity Based Costing (ABC). ABC is an essential method in a high variety, product-customizing environment, to facilitate rapid response to externally caused change. This paper describes the work being done in the Mission Operations Division to re-engineer the development and operation life cycle of Mission Operations Centers using these tools.

An Application of Business Process Management to Health Care Facilities.

PubMed

Hassan, Mohsen M D

The purpose of this article is to help health care facility managers and personnel identify significant elements of their facilities to address, and steps and actions to follow, when applying business process management to them. The ABPMP (Association of Business Process Management Professionals) life-cycle model of business process management is adopted, and steps from Lean, business process reengineering, and Six Sigma, and actions from operations management are presented to implement it. Managers of health care facilities can find in business process management a more comprehensive approach to improving their facilities than Lean, Six Sigma, business process reengineering, and ad hoc approaches that does not conflict with them because many of their elements can be included under its umbrella. Furthermore, the suggested application of business process management can guide and relieve them from selecting among these approaches, as well as provide them with specific steps and actions that they can follow. This article fills a gap in the literature by presenting a much needed comprehensive application of business process management to health care facilities that has specific steps and actions for implementation.

NPTool: Towards Scalability and Reliability of Business Process Management

NASA Astrophysics Data System (ADS)

Braghetto, Kelly Rosa; Ferreira, João Eduardo; Pu, Calton

Currently one important challenge in business process management is provide at the same time scalability and reliability of business process executions. This difficulty becomes more accentuated when the execution control assumes complex countless business processes. This work presents NavigationPlanTool (NPTool), a tool to control the execution of business processes. NPTool is supported by Navigation Plan Definition Language (NPDL), a language for business processes specification that uses process algebra as formal foundation. NPTool implements the NPDL language as a SQL extension. The main contribution of this paper is a description of the NPTool showing how the process algebra features combined with a relational database model can be used to provide a scalable and reliable control in the execution of business processes. The next steps of NPTool include reuse of control-flow patterns and support to data flow management.

Clinical modeling--a critical analysis.

PubMed

Blobel, Bernd; Goossen, William; Brochhausen, Mathias

2014-01-01

Modeling clinical processes (and their informational representation) is a prerequisite for optimally enabling and supporting high quality and safe care through information and communication technology and meaningful use of gathered information. The paper investigates existing approaches to clinical modeling, thereby systematically analyzing the underlying principles, the consistency with and the integration opportunity to other existing or emerging projects, as well as the correctness of representing the reality of health and health services. The analysis is performed using an architectural framework for modeling real-world systems. In addition, fundamental work on the representation of facts, relations, and processes in the clinical domain by ontologies is applied, thereby including the integration of advanced methodologies such as translational and system medicine. The paper demonstrates fundamental weaknesses and different maturity as well as evolutionary potential in the approaches considered. It offers a development process starting with the business domain and its ontologies, continuing with the Reference Model-Open Distributed Processing (RM-ODP) related conceptual models in the ICT ontology space, the information and the computational view, and concluding with the implementation details represented as engineering and technology view, respectively. The existing approaches reflect at different levels the clinical domain, put the main focus on different phases of the development process instead of first establishing the real business process representation and therefore enable quite differently and partially limitedly the domain experts' involvement. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Business Process Design Method Based on Business Event Model for Enterprise Information System Integration

NASA Astrophysics Data System (ADS)

Kobayashi, Takashi; Komoda, Norihisa

The traditional business process design methods, in which the usecase is the most typical, have no useful framework to design the activity sequence with. Therefore, the design efficiency and quality vary widely according to the designer’s experience and skill. In this paper, to solve this problem, we propose the business events and their state transition model (a basic business event model) based on the language/action perspective, which is the result in the cognitive science domain. In the business process design, using this model, we decide event occurrence conditions so that every event synchronizes with each other. We also propose the design pattern to decide the event occurrence condition (a business event improvement strategy). Lastly, we apply the business process design method based on the business event model and the business event improvement strategy to the credit card issue process and estimate its effect.

Ontology engineering for management of data in the transportation domain.

DOT National Transportation Integrated Search

2008-11-01

This report discusses work done as a collaboration between the Kansas Department of Transportation, the University of Kansas Civil Engineering Department, and the Dakota State University School of Business and Information Systems. The work was an exa...

Special Delivery | The UCSB Current

Science.gov Websites

Mitragotri inflammation bioengineering Center for BioEngineering engineering Categories Alumni Business Sciences Staff International Affairs Medicine + Health Students Theater + Dance Environment Archives Topics Arts + Culture Science + Technology Alumni Campus About News@UCSB Public Affairs &

Industrial Strength Changes in Engineering Education.

ERIC Educational Resources Information Center

Chatziioanou, Alypios; Sullivan, Edward

2002-01-01

Addresses the question of how closely the objectives of industry and engineering education should be aligned. Examines trends in college-business relationships using the example of California Polytechnic State University. Reflects on benefits and problems of closer connections with industry. (SK)

48 CFR 1827.304-3 - Contracts for construction work or architect-engineer services. (NASA supplements paragraph (a))

Code of Federal Regulations, 2014 CFR

2014-10-01

... architect-engineer services contracts with other than a small business or nonprofit organization, see 1827... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights Under Government Contracts 1827.304-3 Contracts for...

48 CFR 1827.304-3 - Contracts for construction work or architect-engineer services. (NASA supplements paragraph (a))

Code of Federal Regulations, 2013 CFR

2013-10-01

... architect-engineer services contracts with other than a small business or nonprofit organization, see 1827... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights Under Government Contracts 1827.304-3 Contracts for...

48 CFR 1827.304-3 - Contracts for construction work or architect-engineer services. (NASA supplements paragraph (a))

Code of Federal Regulations, 2011 CFR

2011-10-01

... architect-engineer services contracts with other than a small business or nonprofit organization, see 1827... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights Under Government Contracts 1827.304-3 Contracts for...

48 CFR 1827.304-3 - Contracts for construction work or architect-engineer services. (NASA supplements paragraph (a))

Code of Federal Regulations, 2012 CFR

2012-10-01

... architect-engineer services contracts with other than a small business or nonprofit organization, see 1827... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights Under Government Contracts 1827.304-3 Contracts for...

Decision problems in management of construction projects

NASA Astrophysics Data System (ADS)

Szafranko, E.

2017-10-01

In a construction business, one must oftentimes make decisions during all stages of a building process, from planning a new construction project through its execution to the stage of using a ready structure. As a rule, the decision making process is made more complicated due to certain conditions specific for civil engineering. With such diverse decision situations, it is recommended to apply various decision making support methods. Both, literature and hands-on experience suggest several methods based on analytical and computational procedures, some less and some more complex. This article presents the methods which can be helpful in supporting decision making processes in the management of civil engineering projects. These are multi-criteria methods, such as MCE, AHP or indicator methods. Because the methods have different advantages and disadvantages, whereas decision situations have their own specific nature, a brief summary of the methods alongside some recommendations regarding their practical applications has been given at the end of the paper. The main aim of this article is to review the methods of decision support and their analysis for possible use in the construction industry.

Business Sustainability and Collective Intelligence

ERIC Educational Resources Information Center

Garrido, Paulo

2009-01-01

Purpose: The purpose of this paper is to analyze to which point collective intelligence (CI) concepts and ideas, as applied to organizations, can contribute to enlarge the conceptual basis for business sustainability (BS). Design/methodology/approach: The paper is written from an engineer-minded, systemic and cybernetic perspective. It begins by…

Evaluating the Role of Intermediaries in the Electronic Value Chain.

ERIC Educational Resources Information Center

Janssen, Marijn; Sol, Henk G.

2000-01-01

Presents a business engineering methodology that supports the identification of electronic intermediary roles in the electronic value chain. The goal of this methodology is to give stakeholders insight into their current, and possible alternative, situations by means of visualization, to evaluate the added value of business models using…

Industry/Postsecondary Education Partnership for Faculty Development.

ERIC Educational Resources Information Center

Zanville, Holly

The project addressed the need for Oregon higher education faculty to receive state-of-the art information from Oregon businesses and industries in computer science, business, and engineering areas. Planning for a statewide interactive Eudcational Television Network (ED-NET) has been underway in Oregon for several years. The network will involve…

Development of a Computer Simulation Game Using a Reverse Engineering Approach

ERIC Educational Resources Information Center

Ozkul, Ahmet

2012-01-01

Business simulation games are widely used in the classroom to provide students with experiential learning opportunities on business situations in a dynamic fashion. When properly designed and implemented, the computer simulation game can be a useful educational tool by integrating separate theoretical concepts and demonstrating the nature of…

The ROOT and STEM of a Fruitful Business Education

ERIC Educational Resources Information Center

Badua, Frank

2015-01-01

The author discusses the role of the liberal arts in a business curriculum for an increasingly science, technology, engineering, and mathematics (STEM)-centered world. The author introduces the rhetoric, orthography, ontology, and teleology (ROOT) disciplines, and links them to the traditional liberal arts foundation of higher education. The…

Can Higher Education Stimulate Entrepreneurial Intentions among Engineering and Business Students?

ERIC Educational Resources Information Center

Herman, Emilia; Stefanescu, Daniela

2017-01-01

This paper approaches the issue of higher entrepreneurship education in motivating young people to start their own business as a viable alternative to the successful integration of university graduates on the labour market. The fundamental question of this research is if, currently, entrepreneurship education influences students' entrepreneurial…

Lifecycle Information of Aircraft Engine Components

DTIC Science & Technology

2010-04-14

International Journal of Production Economics , Ecological Economics, Business Horizons, Journal of...Decision Sciences Institute. Ferrer, G., Dew, N., & Apte, U. (2010). When is RFID right for your service? International Journal of Production Economics , 124...Evaluating the business value of RFID: Evidence from five case studies. International Journal of Production Economics , 112, 601-613. =

Where Did Google Get Its Value?

ERIC Educational Resources Information Center

Caufield, James

2005-01-01

Google's extraordinary success is usually attributed to innovative technology and new business models. By contrast, this paper argues that Google's success is mostly due to its adoption of certain library values. First, Google has refused to adopt the standard practices of the search engine business, practices that compromised service to the user…

26 CFR 1.441-3 - Taxable year of a personal service corporation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... section 444, or establishes a business purpose for such fiscal year and obtains the approval of the... adopt any other taxable year must establish a business purpose and obtain the approval of the... performance of services in the fields of health, law, engineering, architecture, accounting, actuarial science...

Designer BHAs reduce costs on Andrew/Cyrus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klein, R.; Todd, S.; Clark, G.

1997-10-01

A key mechanism to development of Andrew/Cyrus has been the development of alliances between BP Exploration, its field partners and various contractors. One such joint venture was the well engineering alliance between BP, Schlumberger, Baker Hughes INTEQ and Transocean, created to deliver five predrilled horizontal wells in the two fields prior to Andrew platform installation. This alliance provided the opportunity to radically change usual ways of doing business in the well engineering arena. One specific aspect involved a rigorous learning process within the team. Rapid learning before and during the operation led to several substantial improvements, one of which wasmore » the development of designer bottomhole assembly (BHA) configurations. Continual development of these assemblies has optimized well placement, bringing enhanced value while reducing costs and increasing potential alliance gainshare.« less

Collaborative enterprise and virtual prototyping (CEVP): a product-centric approach to distributed simulation

NASA Astrophysics Data System (ADS)

Saunders, Vance M.

1999-06-01

The downsizing of the Department of Defense (DoD) and the associated reduction in budgets has re-emphasized the need for commonality, reuse, and standards with respect to the way DoD does business. DoD has implemented significant changes in how it buys weapon systems. The new emphasis is on concurrent engineering with Integrated Product and Process Development and collaboration with Integrated Product Teams. The new DoD vision includes Simulation Based Acquisition (SBA), a process supported by robust, collaborative use of simulation technology that is integrated across acquisition phases and programs. This paper discusses the Air Force Research Laboratory's efforts to use Modeling and Simulation (M&S) resources within a Collaborative Enterprise Environment to support SBA and other Collaborative Enterprise and Virtual Prototyping (CEVP) applications. The paper will discuss four technology areas: (1) a Processing Ontology that defines a hierarchically nested set of collaboration contexts needed to organize and support multi-disciplinary collaboration using M&S, (2) a partial taxonomy of intelligent agents needed to manage different M&S resource contributions to advancing the state of product development, (3) an agent- based process for interfacing disparate M&S resources into a CEVP framework, and (4) a Model-View-Control based approach to defining `a new way of doing business' for users of CEVP frameworks/systems.

Business Development Process

DTIC Science & Technology

2001-10-31

832-4736. DISTRIBUTION STATEMENT A Approved for Public Release Distribution Unlimited Attorney Docket No. 83042 BUSINESS DEVELOPMENT PROCESS TO... BUSINESS DEVELOPMENT PROCESS 3 4 STATEMENT OF GOVERNMENT INTEREST 5 The invention described herein may be manufactured and used 6 by or for the...INVENTION 11 (1) Field of the Invention 12 This invention generally relates to a business 13 development process for assessing new business ideas

A method of demand-driven and data-centric Web service configuration for flexible business process implementation

NASA Astrophysics Data System (ADS)

Xu, Boyi; Xu, Li Da; Fei, Xiang; Jiang, Lihong; Cai, Hongming; Wang, Shuai

2017-08-01

Facing the rapidly changing business environments, implementation of flexible business process is crucial, but difficult especially in data-intensive application areas. This study aims to provide scalable and easily accessible information resources to leverage business process management. In this article, with a resource-oriented approach, enterprise data resources are represented as data-centric Web services, grouped on-demand of business requirement and configured dynamically to adapt to changing business processes. First, a configurable architecture CIRPA involving information resource pool is proposed to act as a scalable and dynamic platform to virtualise enterprise information resources as data-centric Web services. By exposing data-centric resources as REST services in larger granularities, tenant-isolated information resources could be accessed in business process execution. Second, dynamic information resource pool is designed to fulfil configurable and on-demand data accessing in business process execution. CIRPA also isolates transaction data from business process while supporting diverse business processes composition. Finally, a case study of using our method in logistics application shows that CIRPA provides an enhanced performance both in static service encapsulation and dynamic service execution in cloud computing environment.

Service Oriented Architecture for Coast Guard Command and Control

DTIC Science & Technology

2007-03-01

Operations BPEL4WS The Business Process Execution Language for Web Services BPMN Business Process Modeling Notation CASP Computer Aided Search Planning...Business Process Modeling Notation ( BPMN ) provides a standardized graphical notation for drawing business processes in a workflow. Software tools

Business Process Reengineering for Quality Improvement.

DTIC Science & Technology

1995-07-01

17 1.7.3. UNDERSTANDING BUSINESS VALUE...44 3.1.1. UNDERSTANDING BUSINESS PROCESS...targets which will promote the survival and growth of the business. 1.7.3. UNDERSTANDING BUSINESS VALUE Many businesses that have survived the test of time

Improvement of hospital processes through business process management in Qaem Teaching Hospital: A work in progress.

PubMed

Yarmohammadian, Mohammad H; Ebrahimipour, Hossein; Doosty, Farzaneh

2014-01-01

In a world of continuously changing business environments, organizations have no option; however, to deal with such a big level of transformation in order to adjust the consequential demands. Therefore, many companies need to continually improve and review their processes to maintain their competitive advantages in an uncertain environment. Meeting these challenges requires implementing the most efficient possible business processes, geared to the needs of the industry and market segments that the organization serves globally. In the last 10 years, total quality management, business process reengineering, and business process management (BPM) have been some of the management tools applied by organizations to increase business competiveness. This paper is an original article that presents implementation of "BPM" approach in the healthcare domain that allows an organization to improve and review its critical business processes. This project was performed in "Qaem Teaching Hospital" in Mashhad city, Iran and consists of four distinct steps; (1) identify business processes, (2) document the process, (3) analyze and measure the process, and (4) improve the process. Implementing BPM in Qaem Teaching Hospital changed the nature of management by allowing the organization to avoid the complexity of disparate, soloed systems. BPM instead enabled the organization to focus on business processes at a higher level.

Impact of Entrepreneurship Teaching in Higher Education on the Employability of Scientists and Engineers

ERIC Educational Resources Information Center

O'Leary, Simon

2012-01-01

This paper explores the impact effective entrepreneurship teaching has on the employability of scientists and engineers. Business teaching, guest speakers and work placements are part of many science and engineering degrees and this research indicates that entrepreneurship and related issues are also being addressed in a variety of ways and having…

Myths and Motives behind STEM (Science, Technology, Engineering, and Mathematics) Education and the STEM-Worker Shortage Narrartive

ERIC Educational Resources Information Center

Stevenson, Heidi J.

2014-01-01

The Business Roundtable (2013) website presents a common narrative in regard to STEM (Science, Technology, Engineering and Mathematics) education, "American students are falling behind in math and science. Fewer and fewer students are pursuing careers in science, technology, engineering and mathematics, and American students are performing at…

A Curriculum to Enhance Decision-Making Skills of Technical Personnel Working in Teams

ERIC Educational Resources Information Center

Raju, P. K.; Sankar, Chetan S.; Xue, Yajiong

2004-01-01

Rapidly changing engineering designs and business scenarios make it essential for engineers and technical personnel to be trained to be effective team players and project managers. This paper reports the experiences gained in developing and implementing a workshop to train engineers at a steel manufacturing plant. The objective of the workshop was…

Restructuring Engineering Education: Why, How and When? Research & Occasional Paper Series: CSHE.12.11

ERIC Educational Resources Information Center

King, C. Judson

2011-01-01

There is strong interest in broadening engineering education, bringing in more liberal arts content as well as additional subjects such as economics, business and law, with which engineers now have to be familiar. There are also cogent arguments for balancing against what is now the almost exclusively quantitative nature of the curriculum, adding…

Modeling Business Processes of the Social Insurance Fund in Information System Runa WFE

NASA Astrophysics Data System (ADS)

Kataev, M. Yu; Bulysheva, L. A.; Xu, Li D.; Loseva, N. V.

2016-08-01

Introduction - Business processes are gradually becoming a tool that allows you at a new level to put employees or to make more efficient document management system. In these directions the main work, and presents the largest possible number of publications. However, business processes are still poorly implemented in public institutions, where it is very difficult to formalize the main existing processes. Us attempts to build a system of business processes for such state agencies as the Russian social insurance Fund (SIF), where virtually all of the processes, when different inputs have the same output: public service. The parameters of the state services (as a rule, time limits) are set by state laws and regulations. The article provides a brief overview of the FSS, the formulation of requirements to business processes, the justification of the choice of software for modeling business processes and create models of work in the system Runa WFE and optimization models one of the main business processes of the FSS. The result of the work of Runa WFE is an optimized model of the business process of FSS.

Antifragility and Tinkering in Biology (and in Business) Flexibility Provides an Efficient Epigenetic Way to Manage Risk

PubMed Central

Danchin, Antoine; Binder, Philippe M.; Noria, Stanislas

2011-01-01

The notion of antifragility, an attribute of systems that makes them thrive under variable conditions, has recently been proposed by Nassim Taleb in a business context. This idea requires the ability of such systems to ‘tinker’, i.e., to creatively respond to changes in their environment. A fairly obvious example of this is natural selection-driven evolution. In this ubiquitous process, an original entity, challenged by an ever-changing environment, creates variants that evolve into novel entities. Analyzing functions that are essential during stationary-state life yield examples of entities that may be antifragile. One such example is proteins with flexible regions that can undergo functional alteration of their side residues or backbone and thus implement the tinkering that leads to antifragility. This in-built property of the cell chassis must be taken into account when considering construction of cell factories driven by engineering principles. PMID:24710302

Network-induced oscillatory behavior in material flow networks and irregular business cycles

NASA Astrophysics Data System (ADS)

Helbing, Dirk; Lämmer, Stefen; Witt, Ulrich; Brenner, Thomas

2004-11-01

Network theory is rapidly changing our understanding of complex systems, but the relevance of topological features for the dynamic behavior of metabolic networks, food webs, production systems, information networks, or cascade failures of power grids remains to be explored. Based on a simple model of supply networks, we offer an interpretation of instabilities and oscillations observed in biological, ecological, economic, and engineering systems. We find that most supply networks display damped oscillations, even when their units—and linear chains of these units—behave in a nonoscillatory way. Moreover, networks of damped oscillators tend to produce growing oscillations. This surprising behavior offers, for example, a different interpretation of business cycles and of oscillating or pulsating processes. The network structure of material flows itself turns out to be a source of instability, and cyclical variations are an inherent feature of decentralized adjustments.

Antifragility and Tinkering in Biology (and in Business) Flexibility Provides an Efficient Epigenetic Way to Manage Risk.

PubMed

Danchin, Antoine; Binder, Philippe M; Noria, Stanislas

2011-11-29

The notion of antifragility, an attribute of systems that makes them thrive under variable conditions, has recently been proposed by Nassim Taleb in a business context. This idea requires the ability of such systems to 'tinker', i.e., to creatively respond to changes in their environment. A fairly obvious example of this is natural selection-driven evolution. In this ubiquitous process, an original entity, challenged by an ever-changing environment, creates variants that evolve into novel entities. Analyzing functions that are essential during stationary-state life yield examples of entities that may be antifragile. One such example is proteins with flexible regions that can undergo functional alteration of their side residues or backbone and thus implement the tinkering that leads to antifragility. This in-built property of the cell chassis must be taken into account when considering construction of cell factories driven by engineering principles.

Low-cost management aspects for developing, producing and operating future space transportation systems

NASA Astrophysics Data System (ADS)

Goehlich, Robert A.; Rücker, Udo

2005-01-01

It is believed that a potential means for further significant reduction of the recurrent launch cost, which results also in a stimulation of launch rates of small satellites, is to make the launcher reusable, to increase its reliability and to make it suitable for new markets such as mass space tourism. Therefore, not only launching small satellites with expendable rockets on non-regular flights but also with reusable rockets on regular flights should be considered for the long term. However, developing, producing and operating reusable rockets require a fundamental change in the current "business as usual" philosophy. Under current conditions, it might not be possible to develop, to produce or to operate a reusable vehicle fleet economically. The favorite philosophy is based on "smart business" processes adapted by the authors using cost engineering techniques. In the following paper, major strategies for reducing costs are discussed, which are applied for a representative program proposal.

Evolving technologies drive the new roles of Biomedical Engineering.

PubMed

Frisch, P H; St Germain, J; Lui, W

2008-01-01

Rapidly changing technology coupled with the financial impact of organized health care, has required hospital Biomedical Engineering organizations to augment their traditional operational and business models to increase their role in developing enhanced clinical applications utilizing new and evolving technologies. The deployment of these technology based applications has required Biomedical Engineering organizations to re-organize to optimize the manner in which they provide and manage services. Memorial Sloan-Kettering Cancer Center has implemented a strategy to explore evolving technologies integrating them into enhanced clinical applications while optimally utilizing the expertise of the traditional Biomedical Engineering component (Clinical Engineering) to provide expanded support in technology / equipment management, device repair, preventive maintenance and integration with legacy clinical systems. Specifically, Biomedical Engineering is an integral component of the Medical Physics Department which provides comprehensive and integrated support to the Center in advanced physical, technical and engineering technology. This organizational structure emphasizes the integration and collaboration between a spectrum of technical expertise for clinical support and equipment management roles. The high cost of clinical equipment purchases coupled with the increasing cost of service has driven equipment management responsibilities to include significant business and financial aspects to provide a cost effective service model. This case study details the dynamics of these expanded roles, future initiatives and benefits for Biomedical Engineering and Memorial Sloan Kettering Cancer Center.

Temperature Sensing for Oil, Gas, and Structural Analysis

NASA Technical Reports Server (NTRS)

2006-01-01

In 1996, Systems and Processes Engineering Corporation (SPEC), of Austin, Texas, undertook a NASA Small Business Innovation Research (SBIR) contract with Langley Research Center to develop a compact and lightweight digital thermal sensing (DTS) system for monitoring the cryogenic tanks on the X-33 prototype aircraft. That technology, along with a processor developed by SPEC for Goddard Space Flight Center, was space-qualified and integrated into several NASA missions. SPEC formed an ancillary organization, SensorTran, Inc., to continue work developing the DTS technology for a variety of commercial and industrial applications.

SI (Metric) handbook

NASA Technical Reports Server (NTRS)

Artusa, Elisa A.

1994-01-01

This guide provides information for an understanding of SI units, symbols, and prefixes; style and usage in documentation in both the US and in the international business community; conversion techniques; limits, fits, and tolerance data; and drawing and technical writing guidelines. Also provided is information of SI usage for specialized applications like data processing and computer programming, science, engineering, and construction. Related information in the appendixes include legislative documents, historical and biographical data, a list of metric documentation, rules for determining significant digits and rounding, conversion factors, shorthand notation, and a unit index.

Engineering Technologies. State Competency Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 397 competencies, grouped into 58 units, for tech prep programs in the engineering technologies cluster. The competencies were developed through collaboration of Ohio business, industry, and labor representatives and secondary and associate degree educators. The competencies are rated either "essential" (necessary…

1983 Employment Outlook.

ERIC Educational Resources Information Center

Sanders, Howard J., Ed.

1982-01-01

Presents findings on employment situations for chemists and chemical engineers, focusing on: (1) comparison of chemists and chemical engineers; (2) salaries; (3) career planning; and (4) demand, indicated to be decidedly less than in previous years as a result of the deep business recession. (JN)

48 CFR 9904.420-60 - Illustrations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... STANDARDS COST ACCOUNTING STANDARDS 9904.420-60 Illustrations. (a) Business Unit A's engineering department... typing its overhead cost pool. In submitting a proposal, the engineering department assigns several... Section 9904.420-60 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF...

Sandia National Laboratories: Research: Research Foundations: Engineering

Science.gov Websites

Technology Partnerships Business, Industry, & Non-Profits Government Universities Center for Development Agreement (CRADA) Strategic Partnership Projects, Non-Federal Entity (SPP/NFE) Agreements New engineering transitions in advanced, highly critical systems by integrating theory development, experimental

Kilogram-scale prexasertib monolactate monohydrate synthesis under continuous-flow CGMP conditions.

PubMed

Cole, Kevin P; Groh, Jennifer McClary; Johnson, Martin D; Burcham, Christopher L; Campbell, Bradley M; Diseroad, William D; Heller, Michael R; Howell, John R; Kallman, Neil J; Koenig, Thomas M; May, Scott A; Miller, Richard D; Mitchell, David; Myers, David P; Myers, Steven S; Phillips, Joseph L; Polster, Christopher S; White, Timothy D; Cashman, Jim; Hurley, Declan; Moylan, Robert; Sheehan, Paul; Spencer, Richard D; Desmond, Kenneth; Desmond, Paul; Gowran, Olivia

2017-06-16

Advances in drug potency and tailored therapeutics are promoting pharmaceutical manufacturing to transition from a traditional batch paradigm to more flexible continuous processing. Here we report the development of a multistep continuous-flow CGMP (current good manufacturing practices) process that produced 24 kilograms of prexasertib monolactate monohydrate suitable for use in human clinical trials. Eight continuous unit operations were conducted to produce the target at roughly 3 kilograms per day using small continuous reactors, extractors, evaporators, crystallizers, and filters in laboratory fume hoods. Success was enabled by advances in chemistry, engineering, analytical science, process modeling, and equipment design. Substantial technical and business drivers were identified, which merited the continuous process. The continuous process afforded improved performance and safety relative to batch processes and also improved containment of a highly potent compound. Copyright © 2017, American Association for the Advancement of Science.

Modeling interdependencies between business and communication processes in hospitals.

PubMed

Brigl, Birgit; Wendt, Thomas; Winter, Alfred

2003-01-01

The optimization and redesign of business processes in hospitals is an important challenge for the hospital information management who has to design and implement a suitable HIS architecture. Nevertheless, there are no tools available specializing in modeling information-driven business processes and the consequences on the communication between information processing, tools. Therefore, we will present an approach which facilitates the representation and analysis of business processes and resulting communication processes between application components and their interdependencies. This approach aims not only to visualize those processes, but to also to evaluate if there are weaknesses concerning the information processing infrastructure which hinder the smooth implementation of the business processes.

A Framework for Business Process Change Requirements Analysis

NASA Astrophysics Data System (ADS)

Grover, Varun; Otim, Samuel

The ability to quickly and continually adapt business processes to accommodate evolving requirements and opportunities is critical for success in competitive environments. Without appropriate linkage between redesign decisions and strategic inputs, identifying processes that need to be modified will be difficult. In this paper, we draw attention to the analysis of business process change requirements in support of process change initiatives. Business process redesign is a multifaceted phenomenon involving processes, organizational structure, management systems, human resource architecture, and many other aspects of organizational life. To be successful, the business process initiative should focus not only on identifying the processes to be redesigned, but also pay attention to various enablers of change. Above all, a framework is just a blueprint; management must lead change. We hope our modest contribution will draw attention to the broader framing of requirements for business process change.

An Information System Development Method Connecting Business Process Modeling and its Experimental Evaluation

NASA Astrophysics Data System (ADS)

Okawa, Tsutomu; Kaminishi, Tsukasa; Kojima, Yoshiyuki; Hirabayashi, Syuichi; Koizumi, Hisao

Business process modeling (BPM) is gaining attention as a measure of analysis and improvement of the business process. BPM analyses the current business process as an AS-IS model and solves problems to improve the current business and moreover it aims to create a business process, which produces values, as a TO-BE model. However, researches of techniques that connect the business process improvement acquired by BPM to the implementation of the information system seamlessly are rarely reported. If the business model obtained by BPM is converted into UML, and the implementation can be carried out by the technique of UML, we can expect the improvement in efficiency of information system implementation. In this paper, we describe a method of the system development, which converts the process model obtained by BPM into UML and the method is evaluated by modeling a prototype of a parts procurement system. In the evaluation, comparison with the case where the system is implemented by the conventional UML technique without going via BPM is performed.

Innovation Engine

ERIC Educational Resources Information Center

Stuart, Reginald

2012-01-01

This article describes how Wayne State University's TechTown is helping revive Detroit's hard-hit economy. TechTown got its start when then-Wayne State President Irvin Reid and a small group of business leaders in the city and state officials decided Detroit needed to embrace the business incubator idea that had been so successful in other regions…

A Comparison Of The Air Force Institute Of Technology And Civilian Institutions Graduate Logistics Curricula

DTIC Science & Technology

2006-06-01

Reports America’s Best Graduate Schools for 2005. U.S. News and World Report’s rankings were based on inputs from business schools across America...top engineering and graduate business schools for courses in supply chain management” (Johnson and Pyke, 2000). Johnson and Pyke discuss the

ARC-2006-ACD06-0230-021

NASA Image and Video Library

2006-12-15

Kick-off event for Google NASA collaboration (held in the Ames Exploration Center 943A) with Chris Kemp, Ames Business Development (L) Ames Center Director Pete Worden (L-M) Tiffany Montage, Project Manager Engineering, Google (R-M) and Dan Clancy, Director of engineering Google (R)

The organism is the product.

PubMed

Kelly, Jason

2012-01-20

A new industry model is emerging where microbes are first developed by specialist organism engineering firms and then deployed by customers in specific application areas. It is now realistic for companies without prior fermentation experience to purchase and deploy an engineered organism to expand their business.

Facilities Engineering in NASA

NASA Technical Reports Server (NTRS)

Pagluiso, M. A.

1970-01-01

An overview of NASA facilities is given outlining some of the more interesting and unique aspects of engineering and facilities associated with the space program. Outlined are some of the policies under which the Office of Facilities conducts its business. Included are environmental quality control measures.

Austrian Guideline for Geomechanical Design of Tunnels - Necessity for Cooperation between Geologists, Geotechnical and Civil Engineers

NASA Astrophysics Data System (ADS)

Schwarz, Ludwig; Eder, Stefan; Mattle, Bruno; Hammer, Helmut

Rising competitive pressure in the construction business, ever tighter schedules being set up by the clients and ongoing disputes between engineering geologists and civil engineers about the role of geotechnical engineers have - in the last few years - led to increasing discussions between engineers and geologists about the allocation of competences during the design process of underground structures. In the course of this debate, which is often polemic and anything but objective, important information is quite frequently lost - a development which may not only be to the disadvantage of the client but which may also do damage to the reputation of the professions involved. The design procedure of the new Austrian guideline for the geomechanical design of underground structures requires a close collaboration of geologists, geotechnical and civil engineers, yet without allocating competences. While preparing the tender documents for the first construction lot of the Northern feeder line of the Brenner base tunnel, the necessity of a close cooperation of the involved professions became apparent due to the complex geological situation encountered in the project area and the enormous amount of data available. Despite these difficult boundary conditions, the successful application of the guideline was last but not least the result of the joint efforts of the multidisciplinary design team.

An analysis of e-business adoption by Indonesian manufacturing SMEs: A conceptual framework

NASA Astrophysics Data System (ADS)

Saptadi, Singgih; Pratama, Hanggar; Sudirman, Iman; Aisha, Atya Nur; Bernadhi, Brav Deva

2017-11-01

Many researches had shown IT contribution to business. Considering the contribution of SMEs to Indonesia economy, improving the competitiveness of SMEs is a concern in Indonesia development. Many studies had shown many IT projects failed to provide business performance. So, it is important to understand the pattern of e-business that provides business performances of a company. Using business process approach, we had studied SMEs' e-business initiatives in the form of "which business processes that had been supported with IT" by SMEs and business performances that SMEs gained from these e-business initiatives. But, we have not studied the intensity of implemented IT for SMEs' business processes. This paper presents a conceptual framework that relates the business performance and the intensity of e-business adoption. We also propose some antecedents that may relate to the intensity of e-business adoption.

The Business Engineering Surgical Technologies (BEST) teaching method: incubating talents for surgical innovation.

PubMed

de Ruijter, V; Halvax, P; Dallemagne, B; Swanström, L; Marescaux, J; Perretta, S

2015-01-01

Technological innovation in surgical science and healthcare is vital and calls for close collaboration between engineering and surgery. To meet this objective, BEST was designed as a free sustainable innovative teaching method for young professionals, combining surgery, engineering, and business in a multidisciplinary, high-quality, low-cost, and learning-by-doing philosophy. This paper reviews the initial outcomes of the program and discusses lessons learned and future directions of this innovative educational method. BEST educational method is delivered in two parts: the first component consisting of live streaming or pre-recorded online lectures, with an interdisciplinary profile focused on surgery, engineering, and business. The second component is an annual 5-day on-site course, organized at IRCAD-IHU, France. The program includes workshops in engineering, entrepreneurship team projects, and in-depth hands-on experience in laparoscopy, robotic surgery, interventional radiology, and flexible endoscopy with special emphasis on the interdisciplinary aspect of the training. A panel of surgeons, engineers, well-established entrepreneurs, and scientists assessed the team projects for potential patent application. From November 2011 till September 2013, 803 individual and institutional users from 79 different countries attended the online course. In total, 134 young professionals from 32 different countries applied to the onsite course. Sixty participants were selected each year for the onsite course. In addition, five participants were selected for a web-based team. Thirteen provisional patents were filed for the most promising projects. BEST proved to be a global talent incubator connecting students to high-quality education despite institutional and economical boundaries. Viable and innovative ideas arose from this revolutionary approach which is likely to spin-off significant technology transfer and lead the way for future interdisciplinary hybrid surgical education programs and career paths.

J85 Rejuvenation Through Technology Insertion

DTIC Science & Technology

2000-10-01

and Sabre 75 business addition to military production, the J85 was jets . Number Model Produced Aircraft Type(s) Engine Type Thrust (lbs) J85-GE-4 740...REJUVENATION THROUGH TECHNOLOGY INSERTION T.A. Brisken, P.N. Howell, A.C. Ewing Military Engines Operation GE Aircraft Engines 1 Neumann Way Cincinnati...OH 45215, USA Summary thrust to weight ratio turbojet engines with potential application to early cruise missiles and drones. The history of the

A Work-Based Research Assessment of the Impact of "Lean Manufacturing" on Health and Safety Education within an SME

ERIC Educational Resources Information Center

Nikolou-Walker, Elda; Lavery, Kathy

2009-01-01

Globalisation has had a major impact on the engineering industry as Pacific Rim countries undercut manufacturing costs and provide a more cost-effective location for many businesses. Engineering in Northern Ireland has mostly declined owing to increased competition from these countries. Engineering companies are now forced to streamline their…

DETERMINATION OF THE EDUCATIONAL NEEDS OF AGRICULTURAL ENGINEERING TECHNICIANS IN OHIO, A DIGEST OF A PH.D. DISSERTATION. RESEARCH SERIES IN AGRICULTURAL EDUCATION.

ERIC Educational Resources Information Center

BENDER, RALPH E.; HALTERMAN, JERRY J.

THIS STUDY WAS DESIGNED TO DEVELOP CURRICULUMS NEEDED IN TRAINING PROGRAMS FOR AGRICULTURAL ENGINEERING TECHNICIANS IN OHIO. A QUESTIONNAIRE TO INVENTORY THE LABOR FORCE WAS ADMINISTERED TO INDIVIDUALS, FIRMS, BUSINESSES, AND AGENCIES EMPLOYING PERSONS IN AREAS REQUIRING AGRICULTURAL ENGINEERING AND FARM MECHANICS. ANOTHER TO COLLECT INFORMATION…

75 FR 71373 - Airworthiness Directives; International Aero Engines V2500-A1, V2522-A5, V2524-A5, V2525-D5...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-23

... electronically. Mail: Docket Management Facility, U.S. Department of Transportation, 1200 New Jersey Avenue, SE... proposed AD. FOR FURTHER INFORMATION CONTACT: Carlos Fernandes, Aerospace Engineer, Engine Certification... who sent the comment (or signed the comment on behalf of an association, business, labor union, etc...

Community of Interest Engagement Process Plan

DTIC Science & Technology

2012-02-09

and input from Subject Matter Experts (SMEs), as shown in the far left of Figure 2. The team may prepare a Business Process Model Notation ( BPMN ) 22...22 Business Process Modeling Notation ( BPMN ) is a method of illustrating business processes in the form of a...Community of Interest Engagement Plan Joint Planning and Development Office 21 10. Acronyms BPMN Business Process Modeling Notation COI

Linde FUSRAP Site Remediation: Engineering Challenges and Solutions of Remedial Activities on an Active Industrial Facility - 13506

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beres, Christopher M.; Fort, E. Joseph; Boyle, James D.

2013-07-01

The Linde FUSRAP Site (Linde) is located in Tonawanda, New York at a major research and development facility for Praxair, Inc. (Praxair). Successful remediation activities at Linde combines meeting cleanup objectives of radiological contamination while minimizing impacts to Praxair business operations. The unique use of Praxair's property coupled with an array of active and abandoned utilities poses many engineering and operational challenges; each of which has been overcome during the remedial action at Linde. The U.S. Army Corps of Engineers - Buffalo District (USACE) and CABRERA SERVICES, INC. (CABRERA) have successfully faced engineering challenges such as relocation of an abovegroundmore » structure, structural protection of an active water line, and installation of active mechanical, electrical, and communication utilities to perform remediation. As remediation nears completion, continued success of engineering challenges is critical as remaining activities exist in the vicinity of infrastructure essential to business operations; an electrical substation and duct bank providing power throughout the Praxair facility. Emphasis on engineering and operations through final remediation and into site restoration will allow for the safe and successful completion of the project. (authors)« less

T-Check in Technologies for Interoperability: Business Process Management in a Web Services Context

DTIC Science & Technology

2008-09-01

UML Sequence Diagram) 6  Figure 3:   BPMN Diagram of the Order Processing Business Process 9  Figure 4:   T-Check Process for Technology Evaluation 10...Figure 5:  Notional System Architecture 12  Figure 6:  Flow Chart of the Order Processing Business Process 14  Figure 7:  Order Processing Activities...features. Figure 3 (created with Intalio BPMS Designer [Intalio 2008]) shows a BPMN view of the Order Processing business process that is used in the

Overcoming Present-Day Powerplant Limitations Via Unconventional Engine Configurations

NASA Technical Reports Server (NTRS)

Meitner, Peter L.

2006-01-01

The Army Research Laboratory s Vehicle Technology Directorate is sponsoring the prototype development of three unconventional engine concepts - two intermittent combustion (IC) engines and one turbine engine (via SBIR (Small Business Innovative Research) contracts). The IC concepts are the Nutating Engine and the Bonner Engine, and the turbine concept is the POWER Engine. Each of the three engines offers unique and greatly improved capabilities (which cannot be achieved by present-day powerplants), while offering significant reductions in size and weight. This paper presents brief descriptions of the physical characteristics of the three engines, and discusses their performance potentials, as well as their development status.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rotman, D.

After nearly a decade of work and $150 million in development costs. Exxon Research and Engineering (ER&E; Florham Park, NJ) says its natural gas conversion process based on Fischer-Tropsch technology is ready for full-scale commercialization. ER&E is looking to entice one of Exxon`s other business units into building a plant based on the process. The Exxon technology makes refinery or petrochemical feedstocks from natural gas in an integrated three-step process, including fluid-bed reactor to make synthesis gas and a hydrocarbon synthesis step using a proprietary Fischer-Tropsch catalyst. Exxon has successfully demonstrated the process at a pilot plant in Baton Rouge,more » LA but says no commercialization decision has been made. ER&E estimates that to commercialize the technology economically will require a large gas conversion plant-with a price tag of about $2 billion.« less

Ohio Engineering Technologies Competency Profile.

ERIC Educational Resources Information Center

Miller, Lavonna; Draeger, Meg; Bowermeister, Bob; Wancho, Richard

This document, which lists engineering technologies competencies as identified by representatives from business and industry as well as secondary and post-secondary educators throughout Ohio, is intended to assist individuals and organizations in developing college tech prep programs that will prepare students from secondary through post-secondary…

Insights into Technopreneurship: Self-Employment Perceptions among Engineering Students

ERIC Educational Resources Information Center

Urban, B.; Barreira, J.

2007-01-01

Infusing an enterprising spirit into student endeavors and the promotion of entrepreneurial skills has been implemented worldwide as an impetus to promote "technopreneurship". This study empirically investigates entrepreneurial perceptions among non-business engineering students before and after exposure to an entrepreneurship intervention.…

Survey of business process management: challenges and solutions

NASA Astrophysics Data System (ADS)

Alotaibi, Youseef; Liu, Fei

2017-09-01

The current literature shows that creating a good framework on business process model (PM) is not an easy task. A successful business PM should have the ability to ensure accurate alignment between business processes (BPs) and information technology (IT) designs, provide security protection, manage the rapidly changing business environment and BPs, manage customer power, be flexible for reengineering and ensure that IT goals can be easily derived from business goals and hence an information system (IS) can be easily implemented. This article presents an overview of research in the business PM domain. We have presented a review of the challenges facing business PMs, such as misalignment between business and IT, difficulty of deriving IT goals from business goals, creating secured business PM, reengineering BPs, managing the rapidly changing BP and business environment and managing customer power. Also, it presents the limitations of existing business PM frameworks. Finally, we outline several guidelines to create good business PM and the possible further research directions in the business PM domain.

Artifact-Based Transformation of IBM Global Financing

NASA Astrophysics Data System (ADS)

Chao, Tian; Cohn, David; Flatgard, Adrian; Hahn, Sandy; Linehan, Mark; Nandi, Prabir; Nigam, Anil; Pinel, Florian; Vergo, John; Wu, Frederick Y.

IBM Global Financing (IGF) is transforming its business using the Business Artifact Method, an innovative business process modeling technique that identifies key business artifacts and traces their life cycles as they are processed by the business. IGF is a complex, global business operation with many business design challenges. The Business Artifact Method is a fundamental shift in how to conceptualize, design and implement business operations. The Business Artifact Method was extended to solve the problem of designing a global standard for a complex, end-to-end process while supporting local geographic variations. Prior to employing the Business Artifact method, process decomposition, Lean and Six Sigma methods were each employed on different parts of the financing operation. Although they provided critical input to the final operational model, they proved insufficient for designing a complete, integrated, standard operation. The artifact method resulted in a business operations model that was at the right level of granularity for the problem at hand. A fully functional rapid prototype was created early in the engagement, which facilitated an improved understanding of the redesigned operations model. The resulting business operations model is being used as the basis for all aspects of business transformation in IBM Global Financing.

Business Process Management

NASA Astrophysics Data System (ADS)

Hantry, Francois; Papazoglou, Mike; van den Heuvel, Willem-Jan; Haque, Rafique; Whelan, Eoin; Carroll, Noel; Karastoyanova, Dimka; Leymann, Frank; Nikolaou, Christos; Lammersdorf, Winfried; Hacid, Mohand-Said

Business process management is one of the core drivers of business innovation and is based on strategic technology and capable of creating and successfully executing end-to-end business processes. The trend will be to move from relatively stable, organization-specific applications to more dynamic, high-value ones where business process interactions and trends are examined closely to understand more accurately an application's requirements. Such collaborative, complex end-to-end service interactions give rise to the concept of Service Networks (SNs).

13 CFR 120.383 - Restrictions on loan processing.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 13 Business Credit and Assistance 1 2014-01-01 2014-01-01 false Restrictions on loan processing. 120.383 Section 120.383 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Defense Economic Transition Assistance § 120.383 Restrictions on loan processing...

13 CFR 120.383 - Restrictions on loan processing.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 13 Business Credit and Assistance 1 2012-01-01 2012-01-01 false Restrictions on loan processing. 120.383 Section 120.383 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Defense Economic Transition Assistance § 120.383 Restrictions on loan processing...

13 CFR 120.383 - Restrictions on loan processing.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 13 Business Credit and Assistance 1 2013-01-01 2013-01-01 false Restrictions on loan processing. 120.383 Section 120.383 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Defense Economic Transition Assistance § 120.383 Restrictions on loan processing...

13 CFR 120.383 - Restrictions on loan processing.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Restrictions on loan processing. 120.383 Section 120.383 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Defense Economic Transition Assistance § 120.383 Restrictions on loan processing...

Concept design theory and model for multi-use space facilities: Analysis of key system design parameters through variance of mission requirements

NASA Astrophysics Data System (ADS)

Reynerson, Charles Martin

This research has been performed to create concept design and economic feasibility data for space business parks. A space business park is a commercially run multi-use space station facility designed for use by a wide variety of customers. Both space hardware and crew are considered as revenue producing payloads. Examples of commercial markets may include biological and materials research, processing, and production, space tourism habitats, and satellite maintenance and resupply depots. This research develops a design methodology and an analytical tool to create feasible preliminary design information for space business parks. The design tool is validated against a number of real facility designs. Appropriate model variables are adjusted to ensure that statistical approximations are valid for subsequent analyses. The tool is used to analyze the effect of various payload requirements on the size, weight and power of the facility. The approach for the analytical tool was to input potential payloads as simple requirements, such as volume, weight, power, crew size, and endurance. In creating the theory, basic principles are used and combined with parametric estimation of data when necessary. Key system parameters are identified for overall system design. Typical ranges for these key parameters are identified based on real human spaceflight systems. To connect the economics to design, a life-cycle cost model is created based upon facility mass. This rough cost model estimates potential return on investments, initial investment requirements and number of years to return on the initial investment. Example cases are analyzed for both performance and cost driven requirements for space hotels, microgravity processing facilities, and multi-use facilities. In combining both engineering and economic models, a design-to-cost methodology is created for more accurately estimating the commercial viability for multiple space business park markets.

Teaching Tip: Using a Group Role-Play Exercise to Engage Students in Learning Business Processes and ERP

ERIC Educational Resources Information Center

Shen, Yide; Nicholson, Jennifer; Nicholson, Darren

2015-01-01

With the increasing process-centric focus and proliferation of Enterprise Resource Planning (ERP) systems in organizations, it is imperative for business graduates to understand cross-functional business processes and ERP system's role in supporting business processes. However, this topic can be rather abstract and dry to undergraduate students,…

13 CFR 124.204 - How does SBA process applications for 8(a) BD program admission?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false How does SBA process applications for 8(a) BD program admission? 124.204 Section 124.204 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION 8(a) BUSINESS DEVELOPMENT/SMALL DISADVANTAGED BUSINESS STATUS DETERMINATIONS 8(a) Business...

An investigation of document aesthetics for web-to-print repurposing of small-medium business marketing collateral

NASA Astrophysics Data System (ADS)

Allebach, J. P.; Ortiz Segovia, Maria; Atkins, C. Brian; O'Brien-Strain, Eamonn; Damera-Venkata, Niranjan; Bhatti, Nina; Liu, Jerry; Lin, Qian

2010-02-01

Businesses have traditionally relied on different types of media to communicate with existing and potential customers. With the emergence of the Web, the relation between the use of print and electronic media has continually evolved. In this paper, we investigate one possible scenario that combines the use of the Web and print. Specifically, we consider the scenario where a small- or medium-sized business (SMB) has an existing web site from which they wish to pull content to create a print piece. Our assumption is that the web site was developed by a professional designer, working in conjunction with the business owner or marketing team, and that it contains a rich assembly of content that is presented in an aesthetically pleasing manner. Our goal is to understand the process that a designer would follow to create an effective and aesthetically pleasing print piece. We are particularly interested to understand the choices made by the designer with respect to placement and size of the text and graphic elements on the page. Toward this end, we conducted an experiment in which professional designers worked with SMBs to create print pieces from their respective web pages. In this paper, we report our findings from this experiment, and examine the underlying conclusions regarding the resulting document aesthetics in the context of the existing design, and engineering and computer science literatures that address this topic

Mathematics and Science Teachers Professional Development with Local Businesses to Introduce Middle and High School Students to Opportunities in STEM Careers

ERIC Educational Resources Information Center

Miles, Rhea; Slagter van Tryon, Patricia J.; Mensah, Felicia Moore

2015-01-01

TechMath is a professional development program that forms collaborations among businesses, colleges, and schools for the purpose of promoting Science, Technology, Engineering, and Mathematics (STEM) careers. TechMath has provided strategies for creating highquality professional development by bringing together teachers, students, and business…

Entrepreneurship 101: Not Just for Business School Any More

ERIC Educational Resources Information Center

Wasley, Paula

2008-01-01

Entrepreneurial ingenuity and risk taking may seem like traits that can't be taught, but colleges are increasingly attempting to do just that--and they are doing so in nontraditional contexts. Long a staple of business and M.B.A. programs, and of some engineering programs, courses in kick-starting new companies are now taking hold in research…

On the Use of Client-Driven Projects in the Mathematics Classroom

ERIC Educational Resources Information Center

Maki, Dan; Winston, Wayne; Shafii-Mousavi, Morteza; Kochanowski, Paul; Lang, Chris; Ernstberger, Kathy; Hodgson, Ted

2006-01-01

In this article, we discuss the use of client-driven projects--projects that are posed by business, government, and non-profit organizations and based upon real problems facing the organization. Although client-driven projects have long been used in business and engineering education, their use in the mathematics classroom is rare. Client-driven…

76 FR 16407 - Notice Announcing Preliminary Permit Drawing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-23

... preliminary permit applications deemed filed on May 18, 2010, at 8:30 a.m.,\\1\\ for proposed projects to be located at the Army Corps of Engineers' Maxwell Lock and Dam on the Monongahela River, in Washington... business hours is considered filed at 8:30 a.m. on the next regular business day. 18 CFR 385.2001(a)(2...

BPA Facts Pocket Edition

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

BPA will be an engine of the Northwest’s economic prosperity and environmental sustainability. BPA’s actions advance a Northwest power system that is a national leader in providing: • high reliability; • low rates consistent with sound business principles; • responsible environmental stewardship; and • accountability to the region. We deliver on these public responsibilities through a commercially successful business.

New Solar PV Tool Accurately Calculates Degradation Rates, Saving Money and

Science.gov Websites

Guiding Business Decisions | News | NREL New Solar PV Tool Accurately Calculates Degradation Rates, Saving Money and Guiding Business Decisions News Release: New Solar PV Tool Accurately Calculates ; said Dirk Jordan, engineer and solar PV researcher at NREL. "We spent years building consensus in

Hierarchically Structured Recommender System for Improving NPS

ERIC Educational Resources Information Center

Kuang, Jieyan

2016-01-01

Net Promoter System (NPS) is well known as an evaluation measure of the growth engine of big companies in the business area. The ultimate goal of my research is to build an action rules and meta-actions based recommender system for improving NPS scores of 34 companies (clients) dealing with similar businesses in the US and Canada. With the given…

Re-Engineering the Business Education Programme in Universities for Enhanced Human Resources Development in Nigeria

ERIC Educational Resources Information Center

Okoli, B. E.; Azih, N.

2015-01-01

The paper reviewed a business education programme in Nigeria vis-a-vis its role in human resource development and highlighted deficiencies in programme curricular and delivery changes needed in remodeling of the programme to enhance learning outcomes, increase skill acquisition, meet world's standards and current labour demands in business…

7 CFR 4280.112 - Evaluation of grant applications.

Code of Federal Regulations, 2010 CFR

2010-01-01

... primarily for self-use by the agricultural producer or rural small business and will provide energy.... (D) Design and engineering (maximum score of 30 points). The applicant has described the design, engineering, and testing needed for the proposed project. The description supports that the system will be...

7 CFR 4280.112 - Evaluation of grant applications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... primarily for self-use by the agricultural producer or rural small business and will provide energy.... (D) Design and engineering (maximum score of 30 points). The applicant has described the design, engineering, and testing needed for the proposed project. The description supports that the system will be...

Picasso, Car Classics, and the Engineers.

ERIC Educational Resources Information Center

Wosk, Julie H.

1982-01-01

Describes a college course which introduces engineering and business students to abstract art. Students study the relationships between abstract styles in painting and abstract styles in twentieth-century architecture and industrial design. The relevance of abstract design principles is shown by referring students to "Car and Driver"…

Transonic Fan/Compressor Rotor Design Study. Volume 4

DTIC Science & Technology

1982-02-01

amd Identify by block number) Fan Aircraft Engines Compressor Blade Thickness Rotor Camber Distribution Aerodesign Throat Margin Aerodynamics 20...COMPRESSOR ROTOR DESIGN STUDY Volume IV D.E. Parker and M.R. Simonson General Electric Company Aircraft Engine Business Group Advanced Technology...Compressor Research Group Chief, Technology Branch FOR THE COMMANDER H. IVAN BUS Director, Turbine Engine Division If your address has changed, if you

Transonic Fan/Compressor Rotor Design Study. Volume 2

DTIC Science & Technology

1982-02-01

Identity by block number) Fan Aircraft Engines Compressor Blade Thickness Rotor Camber Distribution Aerodesign Throat Margin Aerodynamics 20. 1ABSRACT...COMPRESSOR ROTOR DESIGN STUDY Volume II D.E. Parker and M.R. Simonson General Electric Company / Aircraft Engine Business Group Advanced Technology...Research Group Chief, Technology Branch FOR THE COMMANDER H. IVAN BUSH Director, Turbine Engine Division . If your address has changed, if you wish to be

"It Takes a Certain Kind of Girl to Be in Engineering": The Rhetorical Construction of Undergraduate Women's Engineering Identities

ERIC Educational Resources Information Center

McCall, Mary

2017-01-01

In the last 25 years, little progress has been made within business and technical writing research towards challenging the belief that workplaces and classrooms are gender neutral--by default, white male. This need mirrors the call for more studies within engineering education that analyze gender through an interdisciplinary, intersectional lens.…

A Critical Examination of the Construct Validity of the TTI Performance DNA[TM] Survey for the Purpose of Differentiating the Entrepreneurially-Minded Engineer

ERIC Educational Resources Information Center

Dietrich, Sandra L.

2012-01-01

The United States needs workers with more than technical skills to meet the demands of global competition; more specifically, a new breed of engineer is necessary, one who possesses leadership skills and business acumen in addition to the technical engineering skills. One Midwestern foundation has recognized this challenge and is working with…

An Aspect-Oriented Framework for Business Process Improvement

NASA Astrophysics Data System (ADS)

Pourshahid, Alireza; Mussbacher, Gunter; Amyot, Daniel; Weiss, Michael

Recently, many organizations invested in Business Process Management Systems (BPMSs) in order to automate and monitor their processes. Business Activity Monitoring is one of the essential modules of a BPMS as it provides the core monitoring capabilities. Although the natural step after process monitoring is process improvement, most of the existing systems do not provide the means to help users with the improvement step. In this paper, we address this issue by proposing an aspect-oriented framework that allows the impact of changes to business processes to be explored with what-if scenarios based on the most appropriate process redesign patterns among several possibilities. As the four cornerstones of a BPMS are process, goal, performance and validation views, these views need to be aligned automatically by any approach that intends to support automated improvement of business processes. Our framework therefore provides means to reflect process changes also in the other views of the business process. A health care case study presented as a proof of concept suggests that this novel approach is feasible.

Cetane improvement via the DIESEL-B process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dawson, F.N. Jr.

1987-01-01

The DIESEL-B Process is a new process offered by Calsyn which is targeted toward significant cost savings - up to half the cost of conventional cetane improvers. Pay out of the low capital investments - perhaps $0.5 million - may be obtained in some cases in less than one year. The process involves on-site treating of a small slip stream - about 3% of the diesel pool. Refiners have developed quality fuels for diesel engines which would be suitable for the many diverse applications of these engines. Over the years a fair consensus of required quality specifications has evolved, mostmore » importantly those of the major pipeline operators. Ignition characteristics, as defined by cetane number or cetane index have been the most important, but other controls designed to insure stability, color, carbon content and the like are also essential constraints for the refiner. Refiners have historically been able to meet demand for motor diesel fuels by blending the higher quality virgin and hydrotreated materials with a variety of lesser quality stocks, such as cat cracker light cycle oils, coker cycle oils, thermal cycle oils and the like. But because of the typically poor engine performance properties of these latter materials, refiners have had to employ a variety of additives, most importantly cetane improvement additives, cost for which can be substantial. Calsyn is pleased to announce the development of the DIESEL-B Process for improvement of diesel fuel ignition characteristics in response to the growing need for cost cutting methods for the bread and butter portions of our business.« less

Leveraging Big-Data for Business Process Analytics

ERIC Educational Resources Information Center

Vera-Baquero, Alejandro; Colomo Palacios, Ricardo; Stantchev, Vladimir; Molloy, Owen

2015-01-01

Purpose: This paper aims to present a solution that enables organizations to monitor and analyse the performance of their business processes by means of Big Data technology. Business process improvement can drastically influence in the profit of corporations and helps them to remain viable. However, the use of traditional Business Intelligence…

On the Risk Management and Auditing of SOA Based Business Processes

NASA Astrophysics Data System (ADS)

Orriens, Bart; Heuvel, Willem-Jan V./D.; Papazoglou, Mike

SOA-enabled business processes stretch across many cooperating and coordinated systems, possibly crossing organizational boundaries, and technologies like XML and Web services are used for making system-to-system interactions commonplace. Business processes form the foundation for all organizations, and as such, are impacted by industry regulations. This requires organizations to review their business processes and ensure that they meet the compliance standards set forth in legislation. In this paper we sketch a SOA-based service risk management and auditing methodology including a compliance enforcement and verification system that assures verifiable business process compliance. This is done on the basis of a knowledge-based system that allows integration of internal control systems into business processes conform pre-defined compliance rules, monitor both the normal process behavior and those of the control systems during process execution, and log these behaviors to facilitate retrospective auditing.

Developing cloud-based Business Process Management (BPM): a survey

NASA Astrophysics Data System (ADS)

Mercia; Gunawan, W.; Fajar, A. N.; Alianto, H.; Inayatulloh

2018-03-01

In today’s highly competitive business environment, modern enterprises are dealing difficulties to cut unnecessary costs, eliminate wastes and delivery huge benefits for the organization. Companies are increasingly turning to a more flexible IT environment to help them realize this goal. For this reason, the article applies cloud based Business Process Management (BPM) that enables to focus on modeling, monitoring and process management. Cloud based BPM consists of business processes, business information and IT resources, which help build real-time intelligence systems, based on business management and cloud technology. Cloud computing is a paradigm that involves procuring dynamically measurable resources over the internet as an IT resource service. Cloud based BPM service enables to address common problems faced by traditional BPM, especially in promoting flexibility, event-driven business process to exploit opportunities in the marketplace.

Impact of Growing Business on Software Processes

NASA Astrophysics Data System (ADS)

Nikitina, Natalja; Kajko-Mattsson, Mira

When growing their businesses, software organizations should not only put effort into developing and executing their business strategies, but also into managing and improving their internal software development processes and aligning them with business growth strategies. It is only in this way they may confirm that their businesses grow in a healthy and sustainable way. In this paper, we map out one software company's business growth on the course of its historical events and identify its impact on the company's software production processes and capabilities. The impact concerns benefits, challenges, problems and lessons learned. The most important lesson learned is that although business growth has become a stimulus for starting thinking and improving software processes, the organization lacked guidelines aiding it in and aligning it to business growth. Finally, the paper generates research questions providing a platform for future research.

A Comparative of business process modelling techniques

NASA Astrophysics Data System (ADS)

Tangkawarow, I. R. H. T.; Waworuntu, J.

2016-04-01

In this era, there is a lot of business process modeling techniques. This article is the research about differences of business process modeling techniques. For each technique will explain about the definition and the structure. This paper presents a comparative analysis of some popular business process modelling techniques. The comparative framework is based on 2 criteria: notation and how it works when implemented in Somerleyton Animal Park. Each technique will end with the advantages and disadvantages. The final conclusion will give recommend of business process modeling techniques that easy to use and serve the basis for evaluating further modelling techniques.

Extending BPM Environments of Your Choice with Performance Related Decision Support

NASA Astrophysics Data System (ADS)

Fritzsche, Mathias; Picht, Michael; Gilani, Wasif; Spence, Ivor; Brown, John; Kilpatrick, Peter

What-if Simulations have been identified as one solution for business performance related decision support. Such support is especially useful in cases where it can be automatically generated out of Business Process Management (BPM) Environments from the existing business process models and performance parameters monitored from the executed business process instances. Currently, some of the available BPM Environments offer basic-level performance prediction capabilities. However, these functionalities are normally too limited to be generally useful for performance related decision support at business process level. In this paper, an approach is presented which allows the non-intrusive integration of sophisticated tooling for what-if simulations, analytic performance prediction tools, process optimizations or a combination of such solutions into already existing BPM environments. The approach abstracts from process modelling techniques which enable automatic decision support spanning processes across numerous BPM Environments. For instance, this enables end-to-end decision support for composite processes modelled with the Business Process Modelling Notation (BPMN) on top of existing Enterprise Resource Planning (ERP) processes modelled with proprietary languages.

Linking Effective Project Management to Business Strategy in Oil and Gas Industry through Decision-making Processes

NASA Astrophysics Data System (ADS)

Adeleke, Adeyinka

The construction project in the oil and gas industry covers the entire spectrum of hydrocarbon production from the wellhead (upstream) to downstream facilities. In each of these establishments, the activities in a construction project include: consulting, studies, front-end engineering, detail engineering, procurement, program management, construction, installation, commissioning and start-up. Efficient management of each of the activities involved in construction projects is one of the driving forces for the successful completion of the project. Optimizing the crucial factors in project management during each phase of a project in an oil and gas industry can assist managers to maximize the use of available resources and drive the project to successful conclusions. One of these factors is the decision-making process in the construction project. Current research effort investigated the relationship between decision-making processes and business strategy in oil and gas industry using employee surveys. I recruited employees of different races, age group, genders, and years of experience in order understand their influence on the implementation of the decision-making process in oil and gas industry through a quantitative survey. Decision-making was assessed using five decision measures: (a) rational, (b) intuitive, (c) dependent, (d) avoidant, and (e) spontaneous. The findings indicated gender, age, years of work experience and job titles as primary variables with a negative relationship with decision-making approach for employees working in a major oil and gas industry. The study results revealed that the two most likely decision-making methods in oil and gas industry include: making a decision in a logical and systematic way and seek assistance from others when making a decision. Additionally, the two leading management approaches to decision-making in the oil and gas industry include: decision analysis is part of organization culture and management is committed to the decision-making process. Some recommendations for future studies were presented based on the need to intensify the importance of the current study and enlarge the body of knowledge regarding decision-making process in oil and gas industry.

Use of Statechart Assertions for Modeling Human-in-the-Loop Security Analysis and Decision-Making Processes

DTIC Science & Technology

2012-06-01

THIS PAGE INTENTIONALLY LEFT BLANK xv LIST OF ACRONYMS AND ABBREVIATIONS BPM Business Process Model BPMN Business Process Modeling Notation C&A...checking leads to an improvement in the quality and success of enterprise software development. Business Process Modeling Notation ( BPMN ) is an...emerging standard that allows business processes to be captured in a standardized format. BPMN lacks formal semantics which leaves many of its features

12 CFR 217.122 - Qualification requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... related processes; (ii) Have and document a process (which must capture business environment and internal... current business activities, risk profile, technological processes, and risk management processes; and (ii... assessment systems. (D) Business environment and internal control factors. The Board-regulated institution...

12 CFR 324.122 - Qualification requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... related processes; (ii) Have and document a process (which must capture business environment and internal... current business activities, risk profile, technological processes, and risk management processes; and (ii... assessment systems. (D) Business environment and internal control factors. The FDIC-supervised institution...

Department of Defense Program Solicitation 94; Small Business Technology Transfer (STTR) Program; Fiscal Year 1994.

DTIC Science & Technology

1994-01-01

advanced diesel engine components; high-temperature titanium aluminide and Al-Fe alloys for aircraft and missile engines; environmentally compliant...gun-chamber liners and KE penetrator stabilizer fins, tips, and leading edges; low cost, ceramic thermal barrier coatings for gas turbine blades and

77 FR 64314 - Advisory Committee on Earthquake Hazards Reduction Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-19

... is to discuss engineering needs for existing buildings, to review the National Earthquake Hazards... Committee business. The final agenda will be posted on the NEHRP Web site at http://nehrp.gov/ . DATES: The... assesses: Trends and developments in the science and engineering of earthquake hazards reduction; The...

Engineering Education. Bulletin, 1919, No. 19

ERIC Educational Resources Information Center

Bishop, F. L.

1919-01-01

Engineering schools in common with other educational institutions have been confronted with many unique problems since the outbreak of the European War in 1914. Previous to that time, an increasing number of men who entered colleges and universities elected subjects pertaining to commerce, business management, finances, etc. During the same…

DragonflyTV: "Investigating the Nanoworld". Summative Evaluation Report

ERIC Educational Resources Information Center

Robles, Dawn; Helms, Jenifer; Phillips, Michelle

2009-01-01

In recent years academic, engineering, business, and other fields, have launched major research and development efforts into the study and application of nanoscale science, engineering, and technology. In spite of all these efforts and the investment of millions of dollars, the general public has had little access to research findings and…

7 CFR 4280.117 - Evaluation of RES and EEI grant applications.

Code of Federal Regulations, 2014 CFR

2014-01-01

... intended primarily for self-use by the agricultural producer or rural small business and will provide.... (D) Design and engineering (maximum score of 30 points). The applicant has described the design, engineering, and testing needed for the proposed project. The description supports that the system will be...

7 CFR 4280.117 - Evaluation of RES and EEI grant applications.

Code of Federal Regulations, 2013 CFR

2013-01-01

... intended primarily for self-use by the agricultural producer or rural small business and will provide.... (D) Design and engineering (maximum score of 30 points). The applicant has described the design, engineering, and testing needed for the proposed project. The description supports that the system will be...

7 CFR 4280.117 - Evaluation of RES and EEI grant applications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... intended primarily for self-use by the agricultural producer or rural small business and will provide.... (D) Design and engineering (maximum score of 30 points). The applicant has described the design, engineering, and testing needed for the proposed project. The description supports that the system will be...

Industrial Sponsor Perspective on Leveraging Capstone Design Projects to Enhance Their Business

ERIC Educational Resources Information Center

Weissbach, Robert S.; Snyder, Joseph W.; Evans, Edward R., Jr.; Carucci, James R., Jr.

2017-01-01

Capstone design projects have become commonplace among engineering and engineering technology programs. These projects are valuable tools when assessing students, as they require students to work in teams, communicate effectively, and demonstrate technical competency. The use of industrial sponsors enhances these projects by giving these projects…

Collaborative Approach in Software Engineering Education: An Interdisciplinary Case

ERIC Educational Resources Information Center

Vicente, Aileen Joan; Tan, Tiffany Adelaine; Yu, Alvin Ray

2018-01-01

Aim/Purpose: This study was aimed at enhancing students' learning of software engineering methods. A collaboration between the Computer Science, Business Management, and Product Design programs was formed to work on actual projects with real clients. This interdisciplinary form of collaboration simulates the realities of a diverse Software…

Business Technology Education in the Early 21st Century: The Ongoing Quest for Relevance

ERIC Educational Resources Information Center

Andriole, Stephen J.

2006-01-01

The field of information technology is changing and those responsible for educating the next generation of technology professionals have responded with a new computing curriculum, which identifies five distinct technology majors: computer engineering, computer science, software engineering, information systems and information technology.…

75 FR 78937 - Airworthiness Directives; Honeywell International LTS101 Series Turboshaft Engines and LTP101...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

... Management Facility, U.S. Department of Transportation, 1200 New Jersey Avenue, SE., West Building Ground..., Aerospace Engineer, Los Angeles Aircraft Certification Office, FAA, Transport Airplane Directorate, 3960... an association, business, labor union, etc.). You may review the DOT's complete Privacy Act Statement...

Evolving software reengineering technology for the emerging innovative-competitive era

NASA Technical Reports Server (NTRS)

Hwang, Phillip Q.; Lock, Evan; Prywes, Noah

1994-01-01

This paper reports on a multi-tool commercial/military environment combining software Domain Analysis techniques with Reusable Software and Reengineering of Legacy Software. It is based on the development of a military version for the Department of Defense (DOD). The integrated tools in the military version are: Software Specification Assistant (SSA) and Software Reengineering Environment (SRE), developed by Computer Command and Control Company (CCCC) for Naval Surface Warfare Center (NSWC) and Joint Logistics Commanders (JLC), and the Advanced Research Project Agency (ARPA) STARS Software Engineering Environment (SEE) developed by Boeing for NAVAIR PMA 205. The paper describes transitioning these integrated tools to commercial use. There is a critical need for the transition for the following reasons: First, to date, 70 percent of programmers' time is applied to software maintenance. The work of these users has not been facilitated by existing tools. The addition of Software Reengineering will also facilitate software maintenance and upgrading. In fact, the integrated tools will support the entire software life cycle. Second, the integrated tools are essential to Business Process Reengineering, which seeks radical process innovations to achieve breakthrough results. Done well, process reengineering delivers extraordinary gains in process speed, productivity and profitability. Most importantly, it discovers new opportunities for products and services in collaboration with other organizations. Legacy computer software must be changed rapidly to support innovative business processes. The integrated tools will provide commercial organizations important competitive advantages. This, in turn, will increase employment by creating new business opportunities. Third, the integrated system will produce much higher quality software than use of the tools separately. The reason for this is that producing or upgrading software requires keen understanding of extremely complex applications which is facilitated by the integrated tools. The radical savings in the time and cost associated with software, due to use of CASE tools that support combined Reuse of Software and Reengineering of Legacy Code, will add an important impetus to improving the automation of enterprises. This will be reflected in continuing operations, as well as in innovating new business processes. The proposed multi-tool software development is based on state of the art technology, which will be further advanced through the use of open systems for adding new tools and experience in their use.

Collaboration across disciplines for sustainability: green chemistry as an emerging multistakeholder community.

PubMed

Iles, Alastair; Mulvihill, Martin J

2012-06-05

Sustainable solutions to our nation's material and energy needs must consider environmental, health, and social impacts while developing new technologies. Building a framework to support interdisciplinary interactions and incorporate sustainability goals into the research and development process will benefit green chemistry and other sciences. This paper explores the contributions that diverse disciplines can provide to the design of greener technologies. These interactions have the potential to create technologies that simultaneously minimize environmental and health impacts by drawing on the combined expertise of students and faculty in chemical sciences, engineering, environmental health, social sciences, public policy, and business.

Healthcare delivery systems: designing quality into health information systems.

PubMed

Joyce, Phil; Green, Rosamund; Winch, Graham

2007-01-01

To ensure that quality is 'engineered in' a holistic, integrated and quality approach is required, and Total Quality Management (TQM) principles are the obvious foundations for this. This paper describes a novel approach to viewing the operations of a healthcare provider where electronic means could be used to distribute information (including electronic fund settlements), building around the Full Service Provider core. Specifically, an approach called the "triple pair flow" model is used to provide a view of healthcare delivery that is integrated, yet detailed, and that combines the strategic enterprise view with a business process view.

Big data mining: In-database Oracle data mining over hadoop

NASA Astrophysics Data System (ADS)

Kovacheva, Zlatinka; Naydenova, Ina; Kaloyanova, Kalinka; Markov, Krasimir

2017-07-01

Big data challenges different aspects of storing, processing and managing data, as well as analyzing and using data for business purposes. Applying Data Mining methods over Big Data is another challenge because of huge data volumes, variety of information, and the dynamic of the sources. Different applications are made in this area, but their successful usage depends on understanding many specific parameters. In this paper we present several opportunities for using Data Mining techniques provided by the analytical engine of RDBMS Oracle over data stored in Hadoop Distributed File System (HDFS). Some experimental results are given and they are discussed.

Cost/benefit analysis of advanced materials technology candidates for the 1980's, part 2

NASA Technical Reports Server (NTRS)

Dennis, R. E.; Maertins, H. F.

1980-01-01

Cost/benefit analyses to evaluate advanced material technologies projects considered for general aviation and turboprop commuter aircraft through estimated life-cycle costs, direct operating costs, and development costs are discussed. Specifically addressed is the selection of technologies to be evaluated; development of property goals; assessment of candidate technologies on typical engines and aircraft; sensitivity analysis of the changes in property goals on performance and economics, cost, and risk analysis for each technology; and ranking of each technology by relative value. The cost/benefit analysis was applied to a domestic, nonrevenue producing, business-type jet aircraft configured with two TFE731-3 turbofan engines, and to a domestic, nonrevenue producing, business type turboprop aircraft configured with two TPE331-10 turboprop engines. In addition, a cost/benefit analysis was applied to a commercial turboprop aircraft configured with a growth version of the TPE331-10.

Collaborative business process support in eHealth: integrating IHE profiles through ebXML business process specification language.

PubMed

Dogac, Asuman; Kabak, Yildiray; Namli, Tuncay; Okcan, Alper

2008-11-01

Integrating healthcare enterprise (IHE) specifies integration profiles describing selected real world use cases to facilitate the interoperability of healthcare information resources. While realizing a complex real-world scenario, IHE profiles are combined by grouping the related IHE actors. Grouping IHE actors implies that the associated business processes (IHE profiles) that the actors are involved must be combined, that is, the choreography of the resulting collaborative business process must be determined by deciding on the execution sequence of transactions coming from different profiles. There are many IHE profiles and each user or vendor may support a different set of IHE profiles that fits to its business need. However, determining the precedence of all the involved transactions manually for each possible combination of the profiles is a very tedious task. In this paper, we describe how to obtain the overall business process automatically when IHE actors are grouped. For this purpose, we represent the IHE profiles through a standard, machine-processable language, namely, Organization for the Advancement of Structured Information Standards (OASIS) ebusiness eXtensible Markup Language (ebXML) Business Process Specification (ebBP) Language. We define the precedence rules among the transactions of the IHE profiles, again, in a machine-processable way. Then, through a graphical tool, we allow users to select the actors to be grouped and automatically produce the overall business process in a machine-processable format.

Engineering Software for Interoperability through Use of Enterprise Architecture Techniques

DTIC Science & Technology

2003-03-01

Response Home/ Business Security . To detect flood conditions (i.e. excess water levels) within the monitored area and alert authorities, as necessary...Response; Fire Detection & Response; and Flood Detection & Response. Functional Area Description Intruder Detection & Response Home/ Business ... Security . To monitor and detect unauthorized entry into the secured area and sound alarms/alert authorities, as necessary. Fire Detection

Teaching Note--An Exploration of Team-Based Learning and Social Work Education: A Natural Fit

ERIC Educational Resources Information Center

Robinson, Michael A.; Robinson, Michelle Bachelor; McCaskill, Gina M.

2013-01-01

The literature on team-based learning (TBL) as a pedagogical methodology in social work education is limited; however, TBL, which was developed as a model for business, has been successfully used as a teaching methodology in nursing, business, engineering, medical school, and many other disciplines in academia. This project examines the use of TBL…

Assessing the Impact of a Statewide STEM Investment on K-12, Higher Education, and Business/Community STEM Awareness over Time

ERIC Educational Resources Information Center

Sondergeld, Toni A.; Johnson, Carla C.; Walten, Janet B.

2016-01-01

Despite monetary and educational investments in science, technology, engineering, and mathematics (STEM) being at record high levels, little attention has been devoted to generating a common understanding of STEM. In addition, working with business, K-12 schools, and/or institutions of higher education to establish a grassroots effort to help…

Engineering a Business School in a Former Soviet-Era Closed City: The Case of Omsk, Siberia

ERIC Educational Resources Information Center

Chukhlomin, Valeri; Chukhlomina, Irina

2013-01-01

This article describes a modernization project undertaken by a nationally accredited Russian university located in Omsk, Siberia, and aimed at developing a new international business school. A unique feature of the project is that it was successfully implemented in a former Soviet-era closed city. Until 1991, the university hadn't had any…

Ontology-Based Model Of Firm Competitiveness

NASA Astrophysics Data System (ADS)

Deliyska, Boryana; Stoenchev, Nikolay

2010-10-01

Competitiveness is important characteristics of each business organization (firm, company, corporation etc). It is of great significance for the organization existence and defines evaluation criteria of business success at microeconomical level. Each criterium comprises set of indicators with specific weight coefficients. In the work an ontology-based model of firm competitiveness is presented as a set of several mutually connected ontologies. It would be useful for knowledge structuring, standardization and sharing among experts and software engineers who develop application in the domain. Then the assessment of the competitiveness of various business organizations could be generated more effectively.

A framework for service enterprise workflow simulation with multi-agents cooperation

NASA Astrophysics Data System (ADS)

Tan, Wenan; Xu, Wei; Yang, Fujun; Xu, Lida; Jiang, Chuanqun

2013-11-01

Process dynamic modelling for service business is the key technique for Service-Oriented information systems and service business management, and the workflow model of business processes is the core part of service systems. Service business workflow simulation is the prevalent approach to be used for analysis of service business process dynamically. Generic method for service business workflow simulation is based on the discrete event queuing theory, which is lack of flexibility and scalability. In this paper, we propose a service workflow-oriented framework for the process simulation of service businesses using multi-agent cooperation to address the above issues. Social rationality of agent is introduced into the proposed framework. Adopting rationality as one social factor for decision-making strategies, a flexible scheduling for activity instances has been implemented. A system prototype has been developed to validate the proposed simulation framework through a business case study.

Enhancement of the Acquisition Process for a Combat System-A Case Study to Model the Workflow Processes for an Air Defense System Acquisition

DTIC Science & Technology

2009-12-01

Business Process Modeling BPMN Business Process Modeling Notation SoA Service-oriented Architecture UML Unified Modeling Language CSP...system developers. Supporting technologies include Business Process Modeling Notation ( BPMN ), Unified Modeling Language (UML), model-driven architecture

Transonic Fan/Compressor Rotor Design Study. Volume 5

DTIC Science & Technology

1982-02-01

Fan Aircraft Engines Compressor Blade Thickness Rotor Camber Distribution Aerodesign Throat Margin Aerodynamics 20. ABStTRACT (Continue n reverse...Technology Branch FOR THE COMNANDER H. IV N BUS Director, Turbine Engine Division A If your address has changed, if you wish to be removed from our...ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK General Electric Ctmpany AREA & WORK UNIT NUMBERS Aircraft Engine Business Group Project 2307

Integrated Engineering Information Technology, FY93 accommplishments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, R.N.; Miller, D.K.; Neugebauer, G.L.

1994-03-01

The Integrated Engineering Information Technology (IEIT) project is providing a comprehensive, easy-to-use computer network solution or communicating with coworkers both inside and outside Sandia National Laboratories. IEIT capabilities include computer networking, electronic mail, mechanical design, and data management. These network-based tools have one fundamental purpose: to help create a concurrent engineering environment that will enable Sandia organizations to excel in today`s increasingly competitive business environment.

Transonic Fan/Compressor Rotor Design Study. Volume 3

DTIC Science & Technology

1982-02-01

KEY WORDS (Continue on revere. old. $1 nocoeoary and identify by block nuvb.,) Fan Aircraft Engines Compressor Blade Thickne)s Rotor Camber...COMPRESSOR ’Q ROTOR DESIGN STUDY Volume III D.E. Parker and M.R. Simonson CZ) General Electric Company Aircraft Engine Business Group Advanced...Compressor Research Group Chief, Technology Branch FOR THE COMMANDER H. WAN BI Director, Turbine Engine Division ŕ *If your address has changed, if you wish

Saturn Apollo Program

NASA Image and Video Library

2004-04-15

The business end of a Second Stage (S-II) slowly emerges from the shipping container as workers prepare to transport the Saturn V component to the testing facility at MSFC. The Second Stage (S-II) underwent vibration and engine firing tests. The towering 363-foot Saturn V was a multi-stage, multi-engine launch vehicle standing taller than the Statue of Liberty. Altogether, the Saturn V engines produced as much power as 85 Hoover Dams.

KSC Small Business Expo

NASA Image and Video Library

2017-10-24

Attendees speak to representatives from NASA's Office of Small Business Programs during Kennedy Space Center's 27th Business Opportunities Expo held at Cruise Terminal 5 at Port Canaveral in Florida. The event featured more than 180 businesses, large and small, and government exhibitors from throughout the Space Coast and the nation. The Business Opportunities Expo is sponsored by the NASA KSC Prime Contractor Board, KSC Industry Assistance Office, 45th Space Wing and Canaveral Port Authority. Exhibitors included vendors from a variety of product and service areas, such as computer technology, engineering services, communication equipment and services, and construction and safety products, to name a few. Representatives from the 45th Space Wing, KSC prime contractors, NASA and many more agencies and organizations were on hand to provide information and answer questions.

LONG-RANGE PLANNING FOR SMALL BUSINESSES.

DTIC Science & Technology

MANAGEMENT PLANNING AND CONTROL, COMMERCE), (*COMMERCE, MANAGEMENT PLANNING AND CONTROL), PERSONNEL MANAGEMENT , PRODUCTION CONTROL, BUDGETS, OPERATIONS RESEARCH, ECONOMICS, DECISION MAKING, MANAGEMENT ENGINEERING

KSC-2014-2046

NASA Image and Video Library

2014-04-11

CAPE CANAVERAL, Fla. -- At the Marriott Courtyard Hotel in Cocoa Beach, Fla., Greg Clements, chief of Kennedy's Control and Data Systems Division and lead for the Engineering and Technology's Small Payload Integrated Testing Services, or SPLITS, line of business, speaks to participants in the 4th International Workshop on Lunar and Planetary Compact and Cryogenic Science and Technology Applications. Scientists, engineers and entrepreneurs interested in research on the moon and other planetary surfaces, recently participated in the Workshop. Taking place April 8-11, 2014, the event was designed to foster collaborative work among those interested in solving the challenges of building hardware, software and businesses interested in going back to the moon and exploring beyond. Photo credit: NASA/Daniel Casper

KSC-2014-2047

NASA Image and Video Library

2014-04-11

CAPE CANAVERAL, Fla. -- At the Marriott Courtyard Hotel in Cocoa Beach, Fla., Greg Clements, chief of Kennedy's Control and Data Systems Division and lead for the Engineering and Technology's Small Payload Integrated Testing Services, or SPLITS, line of business, speaks to participants in the 4th International Workshop on Lunar and Planetary Compact and Cryogenic Science and Technology Applications. Scientists, engineers and entrepreneurs interested in research on the moon and other planetary surfaces, recently participated in the Workshop. Taking place April 8-11, 2014, the event was designed to foster collaborative work among those interested in solving the challenges of building hardware, software and businesses interested in going back to the moon and exploring beyond. Photo credit: NASA/Daniel Casper

Commercialization of New Beam Applications

NASA Astrophysics Data System (ADS)

McKeown, Joseph

1996-05-01

The commercialization of electron processing applications is driven by demonstrated technical advantages over current practice. Mature and reliable accelerator technology has permitted more consistent product quality and the development of new processes. However, the barriers to commercial adoption are often not amenable to solution within the laboratory alone. Aspects of the base accelerator technology, plant engineering, production, project management, financing, regulatory control, product throughput and plant operational efficiency all contribute to the business risk. Experiences in building three 10 MeV, 50 kW, IMPELA electron accelerators at approximately 8 M each and achieving cumulative operational availability greater than 98% in commercial environments have identified key parameters defining those aspects. The allowed ranges of these parameters to generate the 1.5 M annual revenue that is typically necessary to support outlays of this scale are presented. Such data have been used in proposals to displace expensive chemicals in the viscose industry, sterilize sewage sludge, detoxify chemically contaminated soils and build radiation service centers for a diversity of applications. The proposals face stiff competition from traditional chemical methods. Quantitative technical and business details of these activities are provided and an attempt is made to establish realistic expectations for the exploitation of electron beam technologies in emerging applications.

Intercultural Communication in Management of Engineering and Technology

NASA Astrophysics Data System (ADS)

Miyoshi, Kazuhisa

Companies want more business-minded industrial technology managers and engineers with entrepreneurial skills who also have an awareness of the challenges of global marketplace. Both the Master of Engineering and Management Degree (MEM) and the Master of Management of Technology Degree (MOT) aim to meet the needs of industry by offering managers and engineers the critical skills need to be successful in a professional career. The world today is characterized by an ever-growing number of contacts resulting in communication between people in industry with different linguistic and cultural backgrounds. This communication takes place because of contacts within the areas of business, engineering, technology, science, and education but also because of immigration brought about by labor shortage or political conflicts. In all these contacts, there is communication, which needs to be as constructive as possible, without misunderstandings and breakdowns. Knowledge on the nature of linguistic and cultural similarities and differences can play a positive and constructive role. The objective of this paper is to examine what makes the difference in communication between people with diverse cultural background. In addition, it emphasizes the importance of diversity management and diversity leadership in the diverse workplace.

Conceptual framework for the mapping of management process with information technology in a business process.

PubMed

Rajarathinam, Vetrickarthick; Chellappa, Swarnalatha; Nagarajan, Asha

2015-01-01

This study on component framework reveals the importance of management process and technology mapping in a business environment. We defined ERP as a software tool, which has to provide business solution but not necessarily an integration of all the departments. Any business process can be classified as management process, operational process and the supportive process. We have gone through entire management process and were enable to bring influencing components to be mapped with a technology for a business solution. Governance, strategic management, and decision making are thoroughly discussed and the need of mapping these components with the ERP is clearly explained. Also we suggest that implementation of this framework might reduce the ERP failures and especially the ERP misfit was completely rectified.

Conceptual Framework for the Mapping of Management Process with Information Technology in a Business Process

PubMed Central

Chellappa, Swarnalatha; Nagarajan, Asha

2015-01-01

This study on component framework reveals the importance of management process and technology mapping in a business environment. We defined ERP as a software tool, which has to provide business solution but not necessarily an integration of all the departments. Any business process can be classified as management process, operational process and the supportive process. We have gone through entire management process and were enable to bring influencing components to be mapped with a technology for a business solution. Governance, strategic management, and decision making are thoroughly discussed and the need of mapping these components with the ERP is clearly explained. Also we suggest that implementation of this framework might reduce the ERP failures and especially the ERP misfit was completely rectified. PMID:25861688

Using AI and Semantic Web Technologies to attack Process Complexity in Open Systems

NASA Astrophysics Data System (ADS)

Thompson, Simon; Giles, Nick; Li, Yang; Gharib, Hamid; Nguyen, Thuc Duong

Recently many vendors and groups have advocated using BPEL and WS-BPEL as a workflow language to encapsulate business logic. While encapsulating workflow and process logic in one place is a sensible architectural decision the implementation of complex workflows suffers from the same problems that made managing and maintaining hierarchical procedural programs difficult. BPEL lacks constructs for logical modularity such as the requirements construct from the STL [12] or the ability to adapt constructs like pure abstract classes for the same purpose. We describe a system that uses semantic web and agent concepts to implement an abstraction layer for BPEL based on the notion of Goals and service typing. AI planning was used to enable process engineers to create and validate systems that used services and goals as first class concepts and compiled processes at run time for execution.

Teaching Business Process Management with Simulation in Graduate Business Programs: An Integrative Approach

ERIC Educational Resources Information Center

Saraswat, Satya Prakash; Anderson, Dennis M.; Chircu, Alina M.

2014-01-01

This paper describes the development and evaluation of a graduate level Business Process Management (BPM) course with process modeling and simulation as its integral component, being offered at an accredited business university in the Northeastern U.S. Our approach is similar to that found in other Information Systems (IS) education papers, and…

Rocketdyne - F-1 Saturn V First Stage Engine. Chapter 1, Appendix C

NASA Technical Reports Server (NTRS)

Biggs, Robert

2009-01-01

Before I go into the history of F-1, I want to discuss the F-1 engine s role in putting man on the moon. The F-1 engine was used in a cluster of five on the first stage, and that was the only power during the first stage. It took the Apollo launch vehicle, which was 363 feet tall and weighed six million pounds, and threw it downrange fifty miles, threw it up to forty miles of altitude, at Mach 7. It took two and one-half minutes to do that and, in the process, burned four and one-half million pounds of propellant, a pretty sizable task. (See Slide 2, Appendix C) My history goes back to the same year I started working at Rocketdyne. That s where the F-1 had its beginning, back early in 1957. In 1957, there was no space program. Rocketdyne was busy working overtime and extra days designing, developing, and producing rocket engines for weapons of mass destruction, not for scientific reasons. The Air Force contracted Rocketdyne to study how to make a rocket engine that had a million pounds of thrust. The highest thing going at the time had 150,000 pounds of thrust. Rocketdyne s thought was the new engine might be needed for a ballistic missile, not that it was going to go on a moon shot.

The future in Agricultural Engineering: news degrees in the Universidad Politécnica de Madrid (UPM)

NASA Astrophysics Data System (ADS)

Cartagena, M. Carmen; Tarquis, A. M.; Vázquez, J.; Serrano, A.; Arce, A.

2010-05-01

The Bologna process is to improve the quality of education, mobility, diversity and the competitiveness and involves three fundamental changes: transform of the structure of titles, changing in methods of teaching and implementation of the systems of quality assurance. Engineer Agronomist at the Universidad Politécnica de Madrid (UPM) has been offered as a degree of five years with a total of 400 credits and seven optional orientations: Crop Production, Plant and Breeding Protection, Environment, Agricultural Economics, Animal Production, Rural Engineering and Food Technology. Actually, the Bologna plan creates three new degrees: Engineering and Science Agronomic, Food Engineering and Agro-Environmental Engineering, with 240 ECTS each one of them and with specific professional characteristics. The changes that involve the introduction of these new degrees is perhaps the largest occurred never at the Spanish university system, not only by the drastic transformation in the structure of titles, but also by the new changes that lie ahead in teaching methods. Among others we will comment the following ones: -A year decreased duration of studies and therefore incorporation into the market. - Elimination of the seven current guidelines to create three specific qualifications of degree. -Decrease of optional subjects and increase in credits for the basic subjects. - Inclusion of business practices. - Increase in the number of credits of final project. - Changes in methodologies and a higher involvement of teachers and students in the education.