A cone-beam computed tomography study of maxillary first permanent molar root and canal morphology in a Chinese population.

PubMed

Zheng, Qing-hua; Wang, Yao; Zhou, Xue-dong; Wang, Qian; Zheng, Guang-ning; Huang, Ding-ming

2010-09-01

This study evaluated root and canal morphology of permanent maxillary first molars in a Chinese population using cone-beam computed tomography scanning. The sample included 775 cone-beam computed tomography images of maxillary first molars; 627 of the subjects had unilateral qualifying molars and 74 had bilateral qualifying molars. The following observations were made: (1) frequency of root and canal numbers, (2) frequency of additional canals in the mesiobuccal root by sex, age, and tooth position, and (3) unilateral and bilateral occurrence of additional canals in the mesiobuccal root. Fused roots were present in 2.71% of unilateral qualifying molars. Multiple canals were present in the following frequencies: two canals in 0.31%, three canals in 47.21%, four canals in 50.40%, five canals in 1.75%, and six canals in 0.31% of teeth. Additional canals were detected in 52.24% of mesiobuccal roots, 1.12% of distobuccal roots, and 1.76% of palatal roots. Patients aged 20 to 30 years showed a higher prevalence of additional mesiobuccal root canals. This prevalence did not differ with sex and tooth position. Most (71.11%) of the additional mesiobuccal root canals in subjects with bilateral qualifying molars were symmetric. Cone-beam computed tomography scanning is an effective method for studying external and internal dental morphology. The root and canal configurations of maxillary first molars in this Chinese population were consistent with previously reported data. More attention should be given to the detection of additional canals in patients between 20 and 30 years of age. These data may facilitate successful endodontic treatment. Copyright 2010 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Evaluation of Root Canal Configuration of Mandibular First Molars in a Palestinian Population by Using Cone-Beam Computed Tomography: An Ex Vivo Study

PubMed Central

Mukhaimer, Raed Hakam

2014-01-01

Aim. The purpose of this study was to investigate the number of canals and variations in root canal configuration in the mandibular permanent first molar teeth of a Palestinian population using cone-beam computed tomography (CBCT). Methods. A sample of 320 extracted double-rooted mandibular permanent first molars from Palestinian population was collected for this study and scanned with CBCT scanner. The following observations were made: number of root canals per root and canal configuration in each root based on Vertucci's classification. Results. Of the 320 mandibular first molars analyzed, 174 (54.4%) had three canals, 132 teeth (41.3%) had four canals, and only four teeth had two canals. The most common canal configuration in the mesial roots was Vertucci type IV (53.8%) followed by type II (38.8%). In the distal roots, the most prevalent canal configuration was Vertucci type I (57.5%) followed by type II ( 22.5%) and type III (10.6%). Conclusion. Our results showed that the number of canals and canal configuration in Palestinian population were consistent with previously reported data. The present study also indicates that CBCT is helpful as a diagnostic tool for the investigation of root canal morphology. PMID:27379321

8. BLACK RIVER CANAL LOOKING DOWN CANAL WITH LATERAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. BLACK RIVER CANAL - LOOKING DOWN CANAL WITH LATERAL TURNOUT NO. 1 ON THE RIGHT. VIEW TO THE SOUTHEAST - Carlsbad Irrigation District, Black River Canal, 15 miles Southeast of Carlsbad near Malaga, Carlsbad, Eddy County, NM

[Root canal treatment of mandibular first premolar with 4 root canals: a case report].

PubMed

Liu, Xin-yang; Zhan, Fu-Liang

2015-10-01

The mandibular first premolar can be considered one of the most challenging teeth to treat, due to the complexity of its root canal morphology and increased incidence of multiple canals. A case of endodontic treatment of a mandibular first premolar exhibiting a total of 4 distinct root canals and 4 apical foramina was described. Anatomic variation of root canal morphology should be considered in endodontic treatment to ensure a favorable healing outcome, and its identification could be enhanced by careful examination using a dental operating microscope. Obturation of root canals using a warm vertical compaction technique with a highly-radiopaque root canal sealer, such as AH Plus, after careful ultrasonic activated irrigation might allow the flow of sealer into the narrowed but unprepared part of the canal, thereby facilitating optimum chemo-mechanical debridement of the root canal system.

The failures of root canal preparation with hand ProTaper.

PubMed

Bătăiosu, Marilena; Diaconu, Oana; Moraru, Iren; Dăguci, C; Tuculină, Mihaela; Dăguci, Luminiţa; Gheorghiţă, Lelia

2012-07-01

The failures of root canal preparation are due to some anatomical deviation (canal in "C" or "S") and some technique errors. The technique errors are usually present in canal root cleansing and shaping stage and are the result of endodontic treatment objectives deviation. Our study was made on technique errors while preparing the canal roots with hand ProTaper. Our study was made "in vitro" on 84 extracted teeth (molars, premolars, incisors and canines). The canal root of these teeth were cleansed and shaped with hand ProTaper by crown-down technique and canal irrigation with NaOCl(2,5%). The dental preparation control was made by X-ray. During canal root preparation some failures were observed like: canal root overinstrumentation, zipping and stripping phenomenon, discarded and/or fractured instruments. Hand ProTaper represents a revolutionary progress of endodontic treatment, but a deviation from accepted rules of canal root instrumentation can lead to failures of endodontic treatment.

A simplified technique of orthograde MTA obturation on the elected canals of posterior teeth: Two case reports.

PubMed

Wahengbam, Brucelee; Wahengbam, Pragya; Tikku, Aseem Prakash

2014-01-01

This article suggests a simplified technique of orthograde MTA obturation in less accessible canal(s) of posteriors teeth without using costly ultrasonics or specialised carrier. Essentially few finger pluggers, absorbent points and a simple canal projection method were used. The orifice(s) of the elected canal(s) to be obturated with MTA were projected onto the external occlusal surface for easy delivery and predictive instrumentation. The idea was based on 'easy access', 'working one canal with one mix at one time', 'thorough condensation' and 'removal of excess moisture'. In case I, palatal canal of tooth no. 2 with gross apical perforation and suspected VRF was obturated with MTA. And in Case II, tooth no. 19 presented with incomplete furcal fracture extending into the canal was obturated with MTA in all 3 canals unitarily. Dense homogenous MTA obturation was achieved and both cases healed uneventfully.

Endodontic management of middle mesial canal of the mandibular molar

PubMed Central

Sundaresh, K J; Srinivasan, Raghu; Mallikarjuna, Rachappa; Rajalbandi, Sandeep

2013-01-01

Thorough knowledge of root canal morphology and unusual anatomy of the tooth is critical for successful endodontic treatment. Although the most common configuration is two roots and three root canals, mandibular molars might have many different combinations. In the literature, it is less described about three mesial canals and two distal canals in mandibular second molars, indicating a rare anatomical configuration. A case of unusual root canal morphology is presented to demonstrate anatomical variations in mandibular molars. Endodontic therapy was performed in a mandibular second molar with five separate canals, three mesial and two distal. This report points out the importance of looking for additional canals and unusual canal morphology, because knowledge of their existence might occasionally enable clinicians to treat a case successfully that otherwise might have ended in failure. In conclusion, every attempt should be made to find and treat all root canals of a tooth. PMID:23349182

Single-rooted maxillary first molar with a single canal: endodontic retreatment.

PubMed

de la Torre, Francisco; Cisneros-Cabello, Rafael; Aranguren, José Luis; Estévez, Roberto; Velasco-Ortega, Eugenio; Segura-Egea, Juan José

2008-12-01

This case report presents an unusual root canal system in a maxillary first molar tooth: a single canal in a single root. The endodontic access cavity displayed only 1 canal orifice. This case demonstrated that: 1) clinicians must have adequate knowledge about root canal morphology and its variations; 2) the location and morphology of root canals should be identified radiologically before the root canal treatment; and 3) careful examination of radiographs and the internal anatomy of teeth is essential.

[Continuous observation of canal aberrations in S-shaped simulated root canal prepared by hand-used ProTaper files].

PubMed

Xia, Ling-yun; Leng, Wei-dong; Mao, Min; Yang, Guo-biao; Xiang, Yong-gang; Chen, Xin-mei

2009-08-01

To observe the formation of canal aberrations in S-shaped root canals prepared by every file of hand-used ProTaper. Fifteen S-shaped simulated resin root canals were selected. Each root canal was prepared by every file of hand-used ProTaper following the manufacturer instruction. The images of canals prepared by S1, S2, F1, F2 and F3 were taken and stored, which were divided into group S1, S2, F1, F2 and F3. One image of canal unprepared was superposed with the images of the same root canal in these five groups respectively to observe the types and number of canal aberrations, which included unprepared area, danger zone, ledge, elbow, zip and perforation. SPSS12.0 software pakage was used for Fisher's exact probabilities in 2x2 table. Unprepared area decreased following preparation by every file of ProTaper, but it still existed when the canal preparation was finished. The incidence of danger zone, elbow and zip in group F1 was 15/15, 11/15, 4/15, respectively, which was significantly higher than that in group S2(2/15,0,0) (P<0.001). Ledge appeared after prepared by F2, and increased sharply in group F3. None perforation was found in all groups. The incidence of canal aberrations begins to increase after prepared by finishing files of ProTaper.The presence of unprepared area suggests that it is essential to rinse canal abundantly during complicated canal preparation and canal antisepsis after preparation.

9. BLACK RIVER CANAL CANAL (RIGHT), DISCHARGE GATE (BACKGROUND), ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. BLACK RIVER CANAL - CANAL (RIGHT), DISCHARGE GATE (BACKGROUND), FARMER'S TURNOUT (LEFT), AND LATERAL NO. 14 (FOREGROUND). VIEW TO SOUTHEAST - Carlsbad Irrigation District, Black River Canal, 15 miles Southeast of Carlsbad near Malaga, Carlsbad, Eddy County, NM

Cleaning and shaping curved root canals: Mtwo vs ProTaper instruments, a lab comparison.

PubMed

Kuzekanani, Maryam; Walsh, Laurence J; Yousefi, Mohammad Ali

2009-01-01

The purpose of this study was to compare root canal preparation in curved canals in molar teeth with the rotary NiTi Mtwo and ProTaper systems in terms of canal shape and smear layer. Mesiobuccal canals of 60 molar teeth with angles of curvature between 25 and 35 degrees were prepared with a torque controlled low speed engine; 30 canals for each system. Each individual instrument was used to prepare four root canals and the time required for preparation was recorded. Standardized radiographs were taken before and following instrumentation and used to determine changes in canal curvature. There was no significant difference in preparation time between the two systems. No instruments separated during use. The Mtwo system gave a statistically smaller change in canal curvature and thus was better for maintaining the original shape of the root canal, with less transportation (P less than 0.05). The greatest difference was seen for maxillary molar teeth. When prepared root canals were examined by SEM there was no difference between the two systems at the coronal, middle or apical thirds. Overall, the results of this study suggest that Mtwo instruments are preferable for situations where canals are curved, particularly for maxillary molars.

Shaping ability of ProFile.04 Taper Series 29 rotary nickel-titanium instruments in simulated root canals. Part 1.

PubMed

Thompson, S A; Dummer, P M

1997-01-01

The aim of this study was to determine the shaping ability of ProFile.04 Taper Series 29 nickel-titanium instruments in simulated canals. A total of 40 simulated root canals made up of four different shapes in terms of angle and position of curvature were prepared by ProFile instruments using a step-down approach. Part 1 of this two-part report describes the efficacy of the instruments in terms of preparation time, instrument failure, canal blockages, loss of canal length and three-dimensional canal form. The time necessary for canal preparation was not influenced significantly by canal shape. No instrument fractures occurred but a total of 52 instruments deformed. Size 6 instruments deformed the most followed by sizes 5, 3 and 4. Canal shape did not influence significantly instrument deformation. None of the canals became blocked with debris and loss of working distance was on average 0.5 mm or less. Intracanal impressions of canal form demonstrated that most canals had definite apical stops, smooth canal walls and good flow and taper. Under the conditions of this study, ProFile.04 Taper Series 29 rotary nickel-titanium instruments prepared simulated canals rapidly and created good three-dimensional form. A substantial number of instruments deformed but it was not possible to determine whether this phenomenon occurred because of the nature of the experimental model or through an inherent design weakness in the instruments.

Infrastructure performance of irrigation canal to irrigation efficiency of irrigation area of Candi Limo in Mojokerto District

NASA Astrophysics Data System (ADS)

Kisnanto, S.; Hadiani, R. R. R.; Ikhsan, C.

2018-03-01

Performance is a measure of infrastructure success in delivering the benefits corresponding it’s design implementation. Debit efficiency is a comparison between outflow debit and inflow debit. Irrigation canal performance is part of the overall performance aspects of an irrigation area. The greater of the canal performance will be concluded that the canal is increasingly able to meet the planned benefits, need to be seen its comparison between the performance and debit efficiency of the canal. The existing problems in the field that the value of the performance of irrigation canals are not always comparable to the debit efficiency. This study was conducted to describe the relationship between the performance of the canal to the canal debit efficiency. The study was conducted at Candi Limo Irrigation Area in Mojokerto Disctrict under the authority of Pemerintahan Provinsi Jawa Timur. The primary canal and secondary canal are surveyed to obtain data. The physical condition of the primary and secondary canals into the material of this study also. Primary and secondary canal performance based on the physical condition in the field. Measurement inflow and outflow debit into the data for the calculation of the debit efficiency. The instrument used in this study such as the current meter for debit measurements in the field as a solution when there is a building measure in the field were damaged, also using the meter and the camera. Permen PU No.32 is used to determine the value of the performance of the canal, while the efficiency analysis to calculate a comparison value between outflow and inflow debit. The process of data running processing by performing the measurement and calculation of the performance of the canal, the canal debit efficiency value calculation, and display a graph of the relationship between the value of the performance with the debit efficiency in each canal. The expected results of this study that the performance value on the primary canal in the range of 0 to 100 % with debit efficiency value in the range of 0 to 100 %, while for the secondary canal 1 has a performance range between 0 to 100% with efficiency ranges between 0 to 100%, the performance of the secondary canals 2 ranges between 0 to 100% with efficiencies ranging from 0 to 100%, the secondary canal 3 performance ranges between 0 to 100% efficiency ranges between 0 to 100%, the secondary canal 4 performance ranges between 0 to 100% efficiency ranges between 0 to 100% and secondary canals 5 performance ranges between 0 to 100% efficiency ranges between 0 to 100%. For the tendency to expect from the performance and efficiency of the debit canal can have a proportional clockwise or counterclockwise, which amount can be random. The tendency to be graphed the relationship between performance and efficiency of the debit of each segment studied canal.

Cisplatin and Fluorouracil Compared With Carboplatin and Paclitaxel in Treating Patients With Inoperable Locally Recurrent or Metastatic Anal Cancer

ClinicalTrials.gov

2017-12-07

Anal Basaloid Carcinoma; Anal Canal Cloacogenic Carcinoma; Anal Squamous Cell Carcinoma; Metastatic Anal Canal Carcinoma; Recurrent Anal Canal Carcinoma; Stage IIIB Anal Canal Cancer; Stage IV Anal Canal Cancer

Panama Canal : a new course for the canal

DOT National Transportation Integrated Search

1999-01-01

While the Panama Canal provides significant time savings, passage through this narrow waterway presents a host of challenges. Soon all canal pilots will have a new tool in their efforts to safely guide vessels through this difficult canal: a Communic...

7. O'BRIAN CANAL After its bifurcation with the DenverHudson Canal, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. O'BRIAN CANAL After its bifurcation with the Denver-Hudson Canal, flowing into Barr Lake through a protected eagle nesting area - O'Brian Canal, South Platte River Drainage Area Northest of Denver, Brighton, Adams County, CO

Materiel Testing in the Tropics (6th Ed)

DTIC Science & Technology

1979-04-01

ceramics Test methodology Panama Canal Zone Textiles Plastics Tropic Test Center Protective coatings Tropical animals 20. (cont) of Materiel Testing in...Canal Zone . .. 1-3 D Materiel Testing in the Panama Canal Zone . . . . . . . ... . 1-5 E Canal Zone Environment--Brief Overview .. .. .... ...... 1-6...trapped there, and by the heavy biomass of the canopy itself. E. CANAL ZONE ENVIRONMENT--BRIEF OVERVIEW The Canal Zone (see frontispiece) bisects the

28. VIEW FROM IMMEDIATELY DOWNSTREAM OF TWIN FALLS MAIN CANAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. VIEW FROM IMMEDIATELY DOWNSTREAM OF TWIN FALLS MAIN CANAL HEADWORKS WITH CANAL BRIDGE IN DISTANCE. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

32. VIEW OF TWIN FALLS MAIN CANAL FROM VICINITY OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

32. VIEW OF TWIN FALLS MAIN CANAL FROM VICINITY OF PROPOSED POWER CANAL, LOOKING UPSTREAM. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

Prevalence of the middle mesial canal in non surgical root canal treated mandibular first and second molars in a local military population

DTIC Science & Technology

2016-06-13

unless the clinician is careful to identify it. Missing this canal can contribute to a sequelae of persistent disease that may require the retreatment of...likelihood of finding MM canals. This is likely due to the fact that root canal retreatments are done on an older patient at a higher rate in the...canal. However, missing a canal can lead to continued pain and discomfort to the patient and other sequelae that may require nonsurgical retreatment

Root canal preparation of mandibular molars with 3 nickel-titanium rotary instruments: a micro-computed tomographic study.

PubMed

Zhao, Dan; Shen, Ya; Peng, Bin; Haapasalo, Markus

2014-11-01

The aim of this study was to describe the canal shaping properties of ProTaper Next (PTN; Dentsply Maillefer, Ballaigues, Switzerland), ProTaper Universal (PTU; Dentsply Tulsa Dental Specialties, Johnson City, TN), and WaveOne (Dentsply Maillefer) nickel-titanium instruments in mandibular first molars by using micro-computed tomographic (micro-CT) scanning. A total of 36 maxillary first molars with 2 separate mesial canals and 1 distal canal were selected and scanned preoperatively and postoperatively by using micro-CT scanning with a voxel size of 30 μm. Canals were prepared with PTU, PTN, and WaveOne systems under hypochlorite irrigation. The volume of the untreated canal; the volume of dentin removed after preparation; the amount of the uninstrumented area; and the transportation to the coronal, middle, and apical thirds of canals were measured. The preparation time and instrument failure were also recorded. Instrumentation of canals increased their volume and surface area. The distal canals had a significantly higher proportion of unprepared surfaces than mesial canals (P < .05). The PTN system produced less transportation than the WaveOne and PTU systems in the apical third of the mesial canals (P < .05). There was no significant difference on apical transportation in distal canals among the 3 instrument systems. Instrumentation with WaveOne was significantly faster than with the other 2 instruments (P < .05). The PTN, PTU, and WaveOne instruments shaped root canals in mandibular first molars in vitro without significant shaping errors. The curved canals prepared using PTN had less apical transportation than the canals prepared using WaveOne and PTU. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Canal Transportation and Centering Ability of ProTaper and SafeSider in Preparation of Curved Root Canals: A CBCT Evaluation

PubMed Central

Delgoshayi, Negar; Abbasi, Mansoure; Bakhtiar, Hengameh; Sakhdari, Shirin; Ghannad, Setareh; Ellini, Mohammad Reza

2018-01-01

Introduction: Maintaining the original central canal path is an important parameter in efficient root canal preparation. Instruments causing minimal changes in original canal path are preferred for this purpose. This study sought to compare canal transportation and centering ability of ProTaper and SafeSider instruments in curved mesiobuccal root canals of mandibular first molars using cone beam computed tomography (CBCT). Methods and Materials : In this experimental study, 30 mesiobuccal root canals of extracted human mandibular first molars with 20° to 40° curvature were randomly divided into two groups (n=15). After mounting in putty, preoperative CBCT scans were obtained of teeth. Root canals in group A were shaped using S1, S2, F1 and F2 of ProTaper system. Root canals in group B were instrumented to size 25 using SafeSider system according to the manufacturers’ instructions. Postoperative CBCT scans were then obtained. The distance between the external root surface and internal canal wall was measured at the mesial and distal at 1, 3 and 7 mm from the apex. The values measured on primary and secondary CBCT scans were compared to assess possible changes in original central canal path and canal transportation. Data were compared using the t-test and repeated measure ANOVA. Results: ProTaper and SafeSider were significantly different in terms of canal transportation and centering ability, and ProTaper was significantly superior to SafeSider in this respect (P<0.001). Conclusion: ProTaper (in contrast to SafeSider) is well capable of maintaining the original central canal path with the least amount of transportation. PMID:29707022

First Branchial Cleft Fistula Associated with External Auditory Canal Stenosis and Middle Ear Cholesteatoma

PubMed Central

Abdollahi fakhim, Shahin; Naderpoor, Masoud; Mousaviagdas, Mehrnoosh

2014-01-01

Introduction: First branchial cleft anomalies manifest with duplication of the external auditory canal. Case Report: This report features a rare case of microtia and congenital middle ear and canal cholesteatoma with first branchial fistula. External auditory canal stenosis was complicated by middle ear and external canal cholesteatoma, but branchial fistula, opening in the zygomatic root and a sinus in the helical root, may explain this feature. A canal wall down mastoidectomy with canaloplasty and wide meatoplasty was performed. The branchial cleft was excised through parotidectomy and facial nerve dissection. Conclusion: It should be considered that canal stenosis in such cases can induce cholesteatoma formation in the auditory canal and middle ear. PMID:25320705

First branchial cleft fistula associated with external auditory canal stenosis and middle ear cholesteatoma.

PubMed

Abdollahi Fakhim, Shahin; Naderpoor, Masoud; Mousaviagdas, Mehrnoosh

2014-10-01

First branchial cleft anomalies manifest with duplication of the external auditory canal. This report features a rare case of microtia and congenital middle ear and canal cholesteatoma with first branchial fistula. External auditory canal stenosis was complicated by middle ear and external canal cholesteatoma, but branchial fistula, opening in the zygomatic root and a sinus in the helical root, may explain this feature. A canal wall down mastoidectomy with canaloplasty and wide meatoplasty was performed. The branchial cleft was excised through parotidectomy and facial nerve dissection. It should be considered that canal stenosis in such cases can induce cholesteatoma formation in the auditory canal and middle ear.

A comparison of instrumentation using Naviflex and Profile nickel-titanium engine-driven rotary instruments.

PubMed

Ottosen, S R; Nicholls, J I; Steiner, J C

1999-06-01

This study was designed to compare the changes in canal configuration resulting from instrumentation by either Profile or Naviflex instruments. Forty mesial canals in extracted human molar teeth were embedded and sectioned at two root levels. Reassembled teeth were instrumented with a modified crown-down technique as described in the Profile training video for Profile files and in a similar manner for Naviflex instruments. Superimposed pre- and postinstrumented cross-sectional root images were projected, traced, and scanned into a computer for analysis. Canal movement, in relation to the furca, and canal area change were recorded. The results showed no significant difference in canal center movement or canal area change between the Profile or Naviflex groups. The degree of canal curvature had no effect on canal center movement or canal area change.

Retrospective Study of Root Canal Configurations of Mandibular Third Molars Using CBCT- Part-II.

PubMed

Somasundaram, Pavithra; Rawtiya, Manjusha; Wadhwani, Shefali; Uthappa, Roshan; Shivagange, Vinay; Khan, Sheeba

2017-06-01

Abnormal root canal morphologies of third molars can be diagnostically and technically challenging during root canal treatment. The aim of this retrospective study was to investigate the root and canal morphology of mandibular third molars in Central India population by using Cone Beam Computed Tomography (CBCT) analysis. CBCT images of 171 mandibular third molars were observed and data regarding number of roots, number of canals, Vertucci's classification in each root, prevalence of C shaped canal, gender and topographical relation of morphology in mandibular third molar was statistically evaluated. Majority of mandibular third molars had two roots (84.2%) and three canals (64.3%). Most mesial root had Vertucci Type II (55.6%) and Vertucci Type IV (22.2%), distal root had Type I canals (87.5%). Over all prevalence of C shaped canals in mandibular third molars was 9.4%. There was a high prevalence of two rooted mandibular third molars with three canals.

The failures of root canal preparation with hand ProTaper

PubMed Central

Bătăiosu, Marilena; Diaconu, Oana; Moraru, Iren; Dăguci, C.; Ţuculină, Mihaela; Dăguci, Luminiţa; Gheorghiţă, Lelia

2012-01-01

The failures of root canal preparation are due to some anatomical deviation (canal in “C” or “S”) and some technique errors. The technique errors are usually present in canal root cleansing and shaping stage and are the result of endodontic treatment objectives deviation. Objectives: Our study was made on technique errors while preparing the canal roots with hand ProTaper. Methodology: Our study was made “in vitro” on 84 extracted teeth (molars, premolars, incisors and canines). The canal root of these teeth were cleansed and shaped with hand ProTaper by crown-down technique and canal irrigation with NaOCl(2,5%). The dental preparation control was made by X-ray. Results: During canal root preparation some failures were observed like: canal root overinstrumentation, zipping and stripping phenomenon, discarded and/or fractured instruments. Conclusions: Hand ProTaper represents a revolutionary progress of endodontic treatment, but a deviation from accepted rules of canal root instrumentation can lead to failures of endodontic treatment. PMID:24778848

Endodontic management of maxillary first molar with seven root canals diagnosed using Cone Beam Computed Tomography scanning

PubMed Central

Raghavendra, Srinidhi Surya; Hindlekar, Ajit Narayan; Desai, Niranjan Nanasaheb; Vyavahare, Nishant Kishor; Napte, Bandu Devrao

2014-01-01

The main objective of root canal treatment is thorough cleaning and shaping of the entire pulp space and its complete filling with an inert filling material. A major cause of post-treatment disease is the inability to locate, debride or adequately fill all canals of the root canal system. The form, configuration, and number of root canals in the maxillary first molars have been discussed for more than half a century. Maxillary first molars commonly present with three roots and three canals, with a second mesiobuccal canal (MB2) also present. With the advent of improved magnification there are reports of multiple root canals in the maxillary first molars. Nonsurgical endodontic therapy of a left maxillary first molar with three roots and seven root canals was successfully performed under a dental operating microscope. The diagnosis of multiple root canals was confirmed with the help of Cone Beam Computed Tomography (CBCT) images. PMID:25565745

Retrospective Study of Root Canal Configurations of Mandibular Third Molars Using CBCT- Part-II

PubMed Central

Somasundaram, Pavithra; Wadhwani, Shefali; Uthappa, Roshan; Shivagange, Vinay; Khan, Sheeba

2017-01-01

Introduction Abnormal root canal morphologies of third molars can be diagnostically and technically challenging during root canal treatment. Aim The aim of this retrospective study was to investigate the root and canal morphology of mandibular third molars in Central India population by using Cone Beam Computed Tomography (CBCT) analysis. Materials and Methods CBCT images of 171 mandibular third molars were observed and data regarding number of roots, number of canals, Vertucci’s classification in each root, prevalence of C shaped canal, gender and topographical relation of morphology in mandibular third molar was statistically evaluated. Results Majority of mandibular third molars had two roots (84.2%) and three canals (64.3%). Most mesial root had Vertucci Type II (55.6%) and Vertucci Type IV (22.2%), distal root had Type I canals (87.5%). Over all prevalence of C shaped canals in mandibular third molars was 9.4%. Conclusion There was a high prevalence of two rooted mandibular third molars with three canals. PMID:28764294

8. VIEW SHOWING THE DEMOSSING OF GRAND CANAL LOCATION UNKNOWN. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. VIEW SHOWING THE DEMOSSING OF GRAND CANAL LOCATION UNKNOWN. AT TEAM OF HORSES ON OPPOSITE BANKS OF THE CANAL DRAG A CHAIN BETWEEN THEM ALONG THE BOTTOM OF THE CANAL, WHICH PULLS THE MOSS AND WEEDS LOOSE. THE PLANS THEN FLOAT DOWN THE CANAL AND ARE CAUGHT IN A SCREEN AND REMOVED. Photographer unknown, 1923 - Grand Canal, North side of Salt River, Tempe, Maricopa County, AZ

Evaluation of Root Canal Preparation Using Rotary System and Hand Instruments Assessed by Micro-Computed Tomography

PubMed Central

Stavileci, Miranda; Hoxha, Veton; Görduysus, Ömer; Tatar, Ilkan; Laperre, Kjell; Hostens, Jeroen; Küçükkaya, Selen; Muhaxheri, Edmond

2015-01-01

Background Complete mechanical preparation of the root canal system is rarely achieved. Therefore, the purpose of this study was to evaluate and compare the root canal shaping efficacy of ProTaper rotary files and standard stainless steel K-files using micro-computed tomography. Material/Methods Sixty extracted upper second premolars were selected and divided into 2 groups of 30 teeth each. Before preparation, all samples were scanned by micro-computed tomography. Thirty teeth were prepared with the ProTaper system and the other 30 with stainless steel files. After preparation, the untouched surface and root canal straightening were evaluated with micro-computed tomography. The percentage of untouched root canal surface was calculated in the coronal, middle, and apical parts of the canal. We also calculated straightening of the canal after root canal preparation. Results from the 2 groups were statistically compared using the Minitab statistical package. Results ProTaper rotary files left less untouched root canal surface compared with manual preparation in coronal, middle, and apical sector (p<0.001). Similarly, there was a statistically significant difference in root canal straightening after preparation between the techniques (p<0.001). Conclusions Neither manual nor rotary techniques completely prepared the root canal, and both techniques caused slight straightening of the root canal. PMID:26092929

Evaluation of Root Canal Preparation Using Rotary System and Hand Instruments Assessed by Micro-Computed Tomography.

PubMed

Stavileci, Miranda; Hoxha, Veton; Görduysus, Ömer; Tatar, Ilkan; Laperre, Kjell; Hostens, Jeroen; Küçükkaya, Selen; Muhaxheri, Edmond

2015-06-20

Complete mechanical preparation of the root canal system is rarely achieved. Therefore, the purpose of this study was to evaluate and compare the root canal shaping efficacy of ProTaper rotary files and standard stainless steel K-files using micro-computed tomography. Sixty extracted upper second premolars were selected and divided into 2 groups of 30 teeth each. Before preparation, all samples were scanned by micro-computed tomography. Thirty teeth were prepared with the ProTaper system and the other 30 with stainless steel files. After preparation, the untouched surface and root canal straightening were evaluated with micro-computed tomography. The percentage of untouched root canal surface was calculated in the coronal, middle, and apical parts of the canal. We also calculated straightening of the canal after root canal preparation. Results from the 2 groups were statistically compared using the Minitab statistical package. ProTaper rotary files left less untouched root canal surface compared with manual preparation in coronal, middle, and apical sector (p<0.001). Similarly, there was a statistically significant difference in root canal straightening after preparation between the techniques (p<0.001). Neither manual nor rotary techniques completely prepared the root canal, and both techniques caused slight straightening of the root canal.

Micro-computed tomography evaluation of the preparation of long oval root canals in mandibular molars with the self-adjusting file.

PubMed

Paqué, Frank; Peters, Ove A

2011-04-01

The aim of this study was to assess the shaping potential of a novel nickel-titanium instrument, the self-adjusting file (SAF), in long oval root canals in distal roots in mandibular molars. Twenty mandibular molars with long oval distal root canals were selected and scanned preoperatively and postoperatively by using micro-computed tomography at an original resolution of 20 μm. Canals were shaped with the SAF, three-dimensionally reconstructed, and evaluated for volume, surface area, canal transportation, and prepared surface. Data were statistically contrasted by using paired t tests and regression analysis. Preoperatively, canal volume was 7.73 ± 2.13 mm(3), and canal area was 42.83 ± 8.14 mm(2). Volumes and surface areas increased significantly (P < .001) by 4.84 ± 1.73 mm(3) and 3.34 ± 1.73 mm(2), respectively, and no gross preparation errors were detected. Unprepared canal surface varied between individual canals, and mean unprepared surface was 23.5% ± 8.9%. Prepared areas were significantly larger compared with rotary canal preparation done in a previous study. Canal transportation scores were higher in the coronal root canal third (106 ± 50 μm) compared with the apical third (81 ± 49 μm). In vitro, preparation of long oval-shaped root canals in mandibular molars with the SAF was effective and safe. Moreover, shapes generated with the SAF were more complete compared with rotary canal preparation. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Saphenous and Infrapatellar Nerves at the Adductor Canal: Anatomy and Implications in Regional Anesthesia.

PubMed

Anagnostopoulou, Sofia; Anagnostis, George; Saranteas, Theodosios; Mavrogenis, Andreas F; Paraskeuopoulos, Tilemachos

2016-01-01

Conflicting data exist regarding the anatomical relationship of the saphenous and infrapatellar nerves at the adductor canal and the location of the superior foramen of the canal. Therefore, the authors performed a cadaveric study to detail the relationship and course of the saphenous and infrapatellar nerves and the level of the superior foramen of the canal. The adductor canal and subsartorial compartment were dissected in 17 human cadavers. The distance between the superior foramen of the canal and the mid-distance (MD) between the base of the patella and the anterior superior iliac crest were measured; the course of the saphenous and infrapatellar nerves and the level of origin of the infrapatellar branch were detailed. In 13 of 17 specimens, the superior foramen of the adductor canal was distal to the MD (mean, 6.5 cm); in the remaining specimens, it was proximal to the MD. In 12 of 17 specimens, the infrapatellar branch exited the canal separately from the saphenous nerve; in the remaining specimens, it originated caudally to the canal. In all dissections, the infrapatellar branch had a constant course in close proximity to the saphenous nerve within the canal and between the sartorious muscle and femoral artery caudally to the canal. Most commonly, the superior foramen of the adductor canal is located caudally to the MD; the infrapatellar branch originates from the saphenous nerve within the canal and has a constant course in close proximity to the saphenous nerve. These observations should be considered for regional anesthesia techniques at the adductor canal. Copyright 2016, SLACK Incorporated.

Middle mesial canals in mandibular molars: incidence and related factors.

PubMed

Nosrat, Ali; Deschenes, Raney J; Tordik, Patricia A; Hicks, M Lamar; Fouad, Ashraf F

2015-01-01

Although the internal anatomy of mandibular molars has been extensively studied, information about middle mesial (MM) canals is limited. The primary aim of this retrospective study was to evaluate the incidence of MM canals in mandibular first and second molars. The secondary aim was to correlate the incidence of MM canals with variables of molar type, sex, age, ethnicity, and presence of a second distal canal. All mature permanent first and second mandibular molars treated from August 2012 to May 2014 were included in the analysis. After completion of root canal instrumentation in all main canals, the clinician inspected the isthmus area of the mesial root using the dental operating microscope. If there was a catch point in this area with a file or explorer, the operator spent more time attempting to negotiate an MM canal. Seventy-five mandibular first and second molars were treated during the specified period. Fifteen (20%) teeth had negotiable MM canals. The incidence of MM canals was 32.1% in patients ≤ 20 years old, 23.8% in patients 21-40 years old, and 3.8% in patients > 40 years. Analysis of data revealed a significant difference in the distribution of MM canals among different age groups (P < .05). The differences in the distribution of MM canals based on sex, ethnicity, molar type, and presence of a second distal canal were not significant. The incidence of negotiable MM canals overall and their frequency of identification in younger patients were higher than in previous reports. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Impact of cross-sectional root canal shape on filled canal volume and remaining root filling material after retreatment.

PubMed

Rechenberg, D K; Paqué, F

2013-06-01

To assess the impact of cross-sectional root canal shape (CSRCS) on the canal volume that can be filled and the root filling material that remains following a subsequent retreatment procedure. A total of 15 extracted two-rooted human maxillary premolars and 15 mandibular first molars were used. Both root canals in the premolars (N = 30) and the distal root canal in the molars (N = 15) were prepared using ProFile instruments and filled by lateral compaction using gutta-percha and AH Plus sealer. Canals were later retreated using the last ProFile used for instrumentation followed by two ProFiles of increasing size. Teeth were viewed in a μCT scanner before and after each treatment step. Defined and validated threshold levels were used to differentiate empty root canal volumes, root dentine and root filling materials from each other. CSRCS was defined as the averaged ratio between bucco-lingual and mesio-distal canal diameter (round ≤ 1, oval 1-2, long oval 2-4 and flattened ≥ 4), determined for each 1 mm over the total root length. Data were averaged between the two canals in premolars, only the distal canals were assessed in molars. Parametric and non-parametric tests were used to statistically compare the data, alpha = 0.01. Canals in premolars had a round CSRCS after preparation (1.0 ± 0.0), whereas distal counterparts in molars were oval (1.6 ± 0.5). Significantly (P < 0.01) more canal volume could be filled, and significantly less filling material remained after retreatment in premolars compared with mandibular molar distal canals. There was a high correlation between CSRCS, filled canal volume and remaining filling material. The endodontic procedures under investigation were significantly influenced by the cross-sectional root canal shape. © 2012 International Endodontic Journal. Published by Blackwell Publishing Ltd.

Root anatomy and canal configuration of the permanent mandibular first molar: a systematic review.

PubMed

de Pablo, Oliver Valencia; Estevez, Roberto; Péix Sánchez, Manuel; Heilborn, Carlos; Cohenca, Nestor

2010-12-01

The main goal of endodontic therapy is to prevent or heal apical periodontitis. However, root canal anatomy might present a clinical challenge directly related to the treatment outcome. The purpose of this study was to review published literature related to root anatomy and root canal configuration of the permanent mandibular first molar. An exhaustive search was undertaken to identify published literature related to the root anatomy and root canal morphology of the permanent mandibular first molar by using key words. The search of the MEDLINE database included all publications from 1966-May 2010. Selected articles were then obtained and reviewed. Data evaluated and summarized in the data sheet included methodology, population, number of teeth per study (power), number of root canals, type of root canal configuration, and identification of number of apical foramina. Forty-one studies were identified including a total of 18,781 teeth. The incidence of a third root was 13% and was strongly correlated with the ethnicity of the studied population. Three canals were present in 61.3%, 4 canals in 35.7%, and 5 canals in approximately 1%. Root canal configuration of the mesial root revealed 2 canals in 94.4% and 3 canals in 2.3%. The most common canal system configuration was Vertucci type IV (52.3%), followed by type II (35%). Root canal configuration of the distal root revealed type I configuration in 62.7%, followed by types II (14.5%) and IV (12.4%). The presence of isthmus communications averaged 54.8% on the mesial and 20.2% on the distal root. The number of roots on the mandibular first molar is directly related to ethnicity. Root canal morphology and configuration might present the clinician with a complex anatomy requiring more diagnostic approaches, access modifications, and clinical skills to successfully localize, negotiate, disinfect, and seal the root canal system. Crown Copyright © 2010. Published by Elsevier Inc. All rights reserved.

Stochastic analyses to identify wellfield withdrawal effects on surface-water and groundwater in Miami-Dade County, Florida.

PubMed

Swain, Eric

2012-12-30

Several stochastic analyses were conducted in Miami-Dade County, Florida, to evaluate the effects of wellfield withdrawal on aquifer water levels, canal stage, and canal flow. Multiyear data for withdrawals at four water-supply wellfields, water levels at the S-121 canal control structure and groundwater head at a nearby monitoring well were used to determine the interrelation between wellfield withdrawals and water levels in the canal and aquifer. A spectral analysis was performed first on the wellfield withdrawals, showing similar patterns of fluctuations, but no well-defined seasonality. In order to compare water-level response with withdrawals at each wellfield, the intercorrelation effects between wellfields was removed through a 'causal chain' approach where the inter-wellfield correlation is used to isolate the wellfield/water-level correlation. Most computed correlations have magnitudes less than 5 percent, but with statistical significance above 90 percent. Results indicate that withdrawals from the wellfields most distant from the canal had no significant correlation to the canal levels. However the highest correlation was not at the wellfield closest to the canal, but at the two wellfields at the intermediate distance that have higher withdrawal rates. The hydraulic interconnectivity of the canal with the rest of the canal network, covering the study area, allows the canal equalizes with all connected canals. This explains why proximity to a particular canal location does not appear to be as important a factor as the withdrawal rate. Groundwater levels are more highly correlated to a wellfield on the same side of the canal, and to pumping wells in the same wellfield on the same side of the canal. This indicates that canals are an effective barrier and source/sink for the groundwater. Further nonlinear correlation analysis indicates that high withdrawal rates disproportionally affect water levels and are the predominant effect on the canal. Published by Elsevier Ltd.

88. CEDAR DRAW SPILL, HIGH LINE CANAL, TWIN FALLS COUNTY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

88. CEDAR DRAW SPILL, HIGH LINE CANAL, TWIN FALLS COUNTY, SOUTH OF FILER, IDAHO; WEST VIEW OF CANAL AND GATES. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

97. POINT SPILL, TWIN FALLS MAIN CANAL, TWIN FALLS COUNTY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

97. POINT SPILL, TWIN FALLS MAIN CANAL, TWIN FALLS COUNTY NORTHWEST OF MURTAUGH, IDAHO; OVERALL WEST VIEW FROM CANAL SIDE. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

149. TWIN FALLS MAIN CANAL DIVERSION, TWIN FALLS COUNTY, MILNER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

149. TWIN FALLS MAIN CANAL DIVERSION, TWIN FALLS COUNTY, MILNER DAM; CLOSE-UP OF MAIN CANAL GATES, SOUTH VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

91. CEDAR DRAW SPILL, HIGH LINE CANAL, TWIN FALLS COUNTY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

91. CEDAR DRAW SPILL, HIGH LINE CANAL, TWIN FALLS COUNTY, SOUTH OF FILER, IDAHO; NORTHEAST VIEW OF CANAL AND GATES. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

89. CEDAR DRAW SPILL, HIGH LINE CANAL, TWIN FALLS COUNTY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

89. CEDAR DRAW SPILL, HIGH LINE CANAL, TWIN FALLS COUNTY, SOUTH OF FILER, IDAHO; OUTLET SIDE OF CANAL, SOUTHWEST VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

3. Dundee Canal looking northwest from north of Dundee Textile ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Dundee Canal looking northwest from north of Dundee Textile Company Mill - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

Disinfection of Contaminated Canals by Different Laser Wavelengths, while Performing Root Canal Therapy

PubMed Central

Asnaashari, Mohammad; Safavi, Nassimeh

2013-01-01

Removal of smear layer and disinfection of canals are important objectives of teeth root canal cleaning. In order to achieve this purpose, rinsing substances, intra canal drugs as well as ultrasound are used. Today, use of laser to remove smear layer and to disinfect root canals has increasingly attracted the attentions. Till now different lasers such as CO2, Nd:YAG, Er:YAG, Er,Cr:YSGG have been used for debris and smear removal from the canals. Numerous studies have shown that Er:YAG is the most appropriate laser for intra canal debris and smear removal. In addition different laser wavelengths have been used directly or as an adjunctive to disinfect canals. Laser light can penetrate areas of canals where irrigating and disinfecting solutions cannot reach, like secondary canals and deep dentinal tubules and also can eliminate microorganisms. Different studies have confirmed the penetration of Nd:YAG laser in deep dentin and reduction of microorganisms penetration. But studies on comparison of antibacterial effects of Nd:YAG laser with sodium hypochlorite showed effectiveness of both, with a better effect for sodium hypochlorite. Studies performed in relation with anti-microbial effects of Diode laser with various parameters show that this laser can be effective in reducing intra canal bacterial count and penetration in the depth of 500 microns in dentin. In studies performed on Diode laser in combination with canal irrigating solutions such as sodium hypochlorite and oxygenated water better results were obtained. Although studies on disinfection by the Erbium laser family show that use of this laser alone can be effective in disinfecting canals, studies evaluating the disinfecting effects of this laser and different concentrations of sodium hypochlorite show that the latter alone is more effective in disinfecting canals. And better results were obtained when Erbium laser was used in combination with sodium hypochlorite irrigating solution in canals. Results of the aforementioned articles indicate that this laser is effective in combination with a rinsing solution such as sodium hypochlorite. Results from studies including several types of the different Er:YAG, Ho:YAG, Nd:YAG, Er,Cr:YSGG lasers in disinfecting canals showed that all wavelengths used in disinfection for different thicknesses of dentin were efficacious without damaging thermal effect. Considering that use of different lasers in canals can be accompanied with temperature increase which can sometimes lead to damages to teeth and surrounding tissues, thus the use of photochemical phenomenon for elimination of microorganisms have attracted attention of many researchers. Studies in this field imply the efficacy of this method in reducing canal bacterial count and recommend its use as an adjunctive after biomechanical preparation of canals. Results from performed studies show removal of intra canal debris and smear layer by different lasers and particularly the Erbium laser family. Furthermore various laser wavelengths, particularly of Diode and Nd:YAG lasers can be effective in reducing intra canal microbial count. Maximum effect is obtained when laser light is used in canals in combination with sodium hypochlorite irrigating substance in appropriate concentration. Therefore use of laser energy can improve success rate of root canal treatments. PMID:25606301

123. MCMULLEN CREEK, HIGH LINE CANAL, TWIN FALLS COUNTY, SOUTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

123. MCMULLEN CREEK, HIGH LINE CANAL, TWIN FALLS COUNTY, SOUTH OF KIMBERLY, IDAHO; SOUTH VIEW OF THE CREEK EMPTYING INTO THE HIGH LINE CANAL. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

189. Photocopy of drawing, Twin Falls Canal Company, date unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

189. Photocopy of drawing, Twin Falls Canal Company, date unknown. ROCK CREEK CROSSING, LOW LINE CANAL, TWIN FALLS COUNTY, SOUTH OF KIMBERLY, IDAHO; BLUEPRINT. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

94. CEDAR DRAW SPILL, LOW LINE CANAL, TWIN FALLS COUNTY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

94. CEDAR DRAW SPILL, LOW LINE CANAL, TWIN FALLS COUNTY SOUTH OF FILER, IDAHO; CLOSE-UP OF GATES FROM THE CANAL SIDE. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

131. FORKS DIVERSION, HIGH LINE AND LOW LINE CANALS, TWIN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

131. FORKS DIVERSION, HIGH LINE AND LOW LINE CANALS, TWIN FALLS COUNTY, SOUTH OF HANSEN, IDAHO; INLET SIDE OF LOW LINE CANAL, WEST VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

75 FR 39632 - Regulated Navigation Area; Gulf Intracoastal Waterway, Inner Harbor Navigation Canal, Harvey...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-12

..., Algiers Canal, New Orleans, LA; Correction ACTION: Interim rule; Correction. SUMMARY: In the Federal... Area; Gulf Intracoastal Waterway, Inner Harbor Navigation Canal, Harvey Canal, Algiers Canal, New Orleans, LA into the Code of Federal Regulations. That publication contained an error in the DATES section...

Endodontic management of mesiobuccal-2 canal in four-rooted and five-canalled mandibular third molar.

PubMed

Garg, Amit Kumar; Bhardwaj, Anuj; Mantri, Vijay R; Agrawal, Neha

2014-05-01

A case of unusual Root morphology is presented to demonstrate anatomic variations in mandibular third molar. The most common configuration of mandibular third molar is two Roots and three canals; however they may have many different combinations. Endodontic treatment was performed in mandibular third molar having aberrant anatomy. Four Root canal orifices were located with the aid of dental operating microscope (DOM) and three separate Roots were diagnosed with radiographs. Spiral computed tomography (SCT) showed the presence of an extra canal and extra Root, indicating a rare anatomic configuration. Looking for additional canals and Roots are important part of successful endodontics, as the knowledge of their existence enable clinicians to treat a case successfully that otherwise might end in failure. The use of DOM and SCT in this case greatly contributed toward making a confirmatory diagnosis and successful endodontic treatment of four-rooted and five-canalled mandibular third molar. Variation in Root canal anatomy is very common. Knowledge of these variations is very essential for successful Root canal outcome, inability to do so can lead to missed canals and failures. Hence, thorough knowledge of Root canal anatomy and advances in diagnostic aids are essential.

INTERNAL ROOT MORPHOLOGY IN MANDIBULAR FIRST PERMANENT MOLARS IN A KENYAN POPULATION.

PubMed

Muriithi, N J; Maina, S W; Okoth, J; Gathece, L W

2012-05-01

To determine the internal root morphology and gender variations in mandibular first permanent molars in a Kenyan population. In vitro descriptive cross sectional study. School of Dental Sciences, University of Nairobi The mesial root of mandibular first molars had two canals in 96.3% of the teeth in both males and females and-type IV canal configuration was most prevalent in the mesial root. The distal root of the mandibular first molar had one canal in 57.7% of the teeth in males and females. There were significant gender variations in the number of canals and canal configurations in the distal root. Two canals were more prevalent in females (53.6%) compared to males (30.4%) and a single canal was more frequent in males (69.6%) compared to females (46.4%) (P=0.001). Canal types 1, 11 and IV were the most frequent in the mandibular distal root. The gender variation in the frequency of canal types I, II and IV in the distal root was statistically significant (P=0.001). Most of the mandibular first molars have three canals (56%). Two canals in the distal root are more frequent among females (53.6%) compared to males (30.4%).

Earth observations taken during STS-98 mission

NASA Image and Video Library

2001-02-07

STS098-712-091 (7-20 February 2001) --- The forested area of the Panama Canal Zone can be seen near the center of this north-looking image, photographed with a 70mm handheld camera from the Earth-orbiting Space Shuttle Atlantis. (NOTE: The image should be oriented with Panama running horizontally and the majority of the clouds at the top). The Panama Canal Zone extends 5 miles (8 kilometers) on either side of the Panama Canal. The forested zone acts as a buffer for the canal to help prevent erosion and sediment from clogging the canal. Most of the countryside on both sides of the Canal Zone has been deforested to make way for large ranches and the raising of cattle. Though some sedimentation is occurring, dredging of the canal keeps the passage clear. The Panama Canal is 40 miles (64 kilometers) long including dredged approach channels at each end. With the Caribbean Sea covering the upper portion of the image and the Pacific Ocean covering the lower portion of the image, the canal traverses the Isthmus of Panama in a northwest to southeast direction. Gatun Lake, one of the largest artificial lakes in the world, is visible at the north end of the Canal Zone. Panama City (light-colored grayish area) is discernible to the right of the canal at its southern entrance from the Pacific Ocean. In 1996, 15,000 ships traveled through the canal, an average of 42 ships per day. Passage through the canal requires 7 to 8 hours.

Cone-beam computed tomography as advanced diagnostic aid in endodontic treatment of molars with multiple canals: Two case reports

PubMed Central

Kamble, Amit Pralhad; Pawar, Rohini Rangarao; Mattigatti, Sudha; Mangala, T. M.; Makandar, Saleem

2017-01-01

The purpose of these case reports is to emphasize the importance of knowledge regarding the root canal morphology and current diagnostic aids one should have as both of these important factors going to affect the prognosis of the endodontic treatment. These two case reports describe the maxillary and mandibular first molars with multiple canals. After clinical and radiographic diagnosis, additional help of cone-beam computed tomography (CBCT) of mandibular molar has been taken to evaluate the morphology and canal pattern; while maxillary molar was evaluated using CBCT scan to evaluate the canal configuration and obturation. In CBCT evaluation, the mandibular molar was diagnosed with six separated canals with three mesial and three distal canals and with radix paramolaris and radix entomolaris. The maxillary molar had five canals with three mesiobuccal (MB) canals. Both molars were instrumented with conventional hand and rotary file systems and obturated by conventional lateral compaction method. The axial images from CBCT show Vertucci Type VIII canal pattern in both roots of first mandibular molars and in MB root of maxillary first molar Sert and Bayirli Type XVIII canal configuration and no accessory canal in distobuccal and palatal root. With the recent innovations in diagnostic and operating aids, we can come across many variations in the root canal morphology of both mandibular and maxillary teeth, especially multi-rooted one (i.e., molars), and the knowledge of which leads to successful endodontic treatment with an excellent prognosis. PMID:29259367

Internal carotid arterial canal size and scaling in Euarchonta: Re-assessing implications for arterial patency and phylogenetic relationships in early fossil primates.

PubMed

Boyer, Doug M; Kirk, E Christopher; Silcox, Mary T; Gunnell, Gregg F; Gilbert, Christopher C; Yapuncich, Gabriel S; Allen, Kari L; Welch, Emma; Bloch, Jonathan I; Gonzales, Lauren A; Kay, Richard F; Seiffert, Erik R

2016-08-01

Primate species typically differ from other mammals in having bony canals that enclose the branches of the internal carotid artery (ICA) as they pass through the middle ear. The presence and relative size of these canals varies among major primate clades. As a result, differences in the anatomy of the canals for the promontorial and stapedial branches of the ICA have been cited as evidence of either haplorhine or strepsirrhine affinities among otherwise enigmatic early fossil euprimates. Here we use micro X-ray computed tomography to compile the largest quantitative dataset on ICA canal sizes. The data suggest greater variation of the ICA canals within some groups than has been previously appreciated. For example, Lepilemur and Avahi differ from most other lemuriforms in having a larger promontorial canal than stapedial canal. Furthermore, various lemurids are intraspecifically variable in relative canal size, with the promontorial canal being larger than the stapedial canal in some individuals but not others. In species where the promontorial artery supplies the brain with blood, the size of the promontorial canal is significantly correlated with endocranial volume (ECV). Among species with alternate routes of encephalic blood supply, the promontorial canal is highly reduced relative to ECV, and correlated with both ECV and cranium size. Ancestral state reconstructions incorporating data from fossils suggest that the last common ancestor of living primates had promontorial and stapedial canals that were similar to each other in size and large relative to ECV. We conclude that the plesiomorphic condition for crown primates is to have a patent promontorial artery supplying the brain and a patent stapedial artery for various non-encephalic structures. This inferred ancestral condition is exhibited by treeshrews and most early fossil euprimates, while extant primates exhibit reduction in one canal or another. The only early fossils deviating from this plesiomorphic condition are Adapis parisiensis with a reduced promontorial canal, and Rooneyia and Mahgarita with reduced stapedial canals. Copyright © 2016 Elsevier Ltd. All rights reserved.

Shaping ability of NT Engine and McXim rotary nickel-titanium instruments in simulated root canals. Part 2.

PubMed

Thompson, S A; Dummer, P M

1997-07-01

The aim of this laboratory-based study was to determine the shaping ability of NT Engine and McXim nickel-titanium rotary instruments in simulated root canals. A total of 40 canals with four different shapes in terms of angle and position of curve were prepared with NT Engine and McXim instruments, using the technique recommended by the manufacturer. Part 2 of this report describes the efficacy of the instruments in terms of prevalence of canal aberrations, the amount and direction of canal transportation and overall postoperative shape. Pre- and postoperative images of the canals were taken using a video camera attached to a computer with image analysis software. The pre- and postoperative views were superimposed to highlight the amount and position of material removed during preparation. No zips, elbows, perforations or danger zones were created during preparation. Forty-two per cent of canals had ledges on the outer aspect of the curve, the majority of which (16 out of 17) occurred in canals with short acute curves. There were significant differences (P < 0.001) between canal shapes in terms of the incidence of ledges. There were highly significant differences (P < 0.001) between the canal shapes in total canal width at specific points along the canal length and in the amount or resin removed from the inner and outer aspects of the curve. The direction of canal transportation at the end-point of preparation was most frequently towards the outer aspect of the curve, especially in canals with 40 degrees curves. At the beginning of the curve, transportation in the majority of canals was towards the inner aspect of the curve. Mean absolute transportation was less than 0.03 mm throughout the curve and towards the end-point, with significant differences between canal shapes occurring at the apex (P < 0.05) and at the beginning of the curve (P < 0.001). Under the conditions of this study, NT Engine and McXim rotary nickel-titanium instruments created no aberrations other than ledges and produced only minimal transportation. The overall shape of canals was good.

Conventional root canal therapy of C-shaped mandibular second molar. A case report.

PubMed

Lynn, Evan A

2006-11-01

The C-shaped root canal system and treatment implications were first described by Cooke and Cox in 1979. C-shaped canals are most frequently found in mandibular second molars, but they can occur in any mandibular molar, and they have been reported in maxillary molars as well. C-shaped mandibular molars are characterized by a C-shaped groove that connects one or more root canals. This groove can occur anywhere along the root canal system, making it difficult to diagnose and treat. A C-shaped root canal system may appear completely normal at the level of the pulp chamber but can begin to manifest itself in the middle or apical one-third. Furthermore, C-shaped canals are challenging if not impossible to predict radiographically. C-shaped canals in mandibular second molars are found most frequently in the Chinese population, with reports showing up to a 31.5% incidence, as compared to an approximate 7% incidence in the general population. This case report demonstrates an incidence of a C-shaped canal that was unable to be detected radiographically and which contained three separate root canals that communicated in the apical one-third of the root canal system. Canal orifices were located approximately 2 mm below the level of the CEJ, which is in agreement with a recent micro-computed tomography study of C-shaped mandibular molars that found 98% of all C-shaped molars studied had orifices located 1 mm to 3 mm below the CEJ. The CT study also found that all C-shaped canals contained fused roots and confirmed previous findings that the C-shape configuration varies greatly throughout the length of the canal.

Root canal volume change and transportation by Vortex Blue, ProTaper Next, and ProTaper Universal in curved root canals

PubMed Central

2018-01-01

Objectives The aim of this study was to compare root canal volume change and canal transportation by Vortex Blue (VB; Dentsply Tulsa Dental Specialties), ProTaper Next (PTN; Dentsply Maillefer), and ProTaper Universal (PTU; Dentsply Maillefer) nickel-titanium rotary files in curved root canals. Materials and Methods Thirty canals with 20°–45° of curvature from extracted human molars were used. Root canal instrumentation was performed with VB, PTN, and PTU files up to #30.06, X3, and F3, respectively. Changes in root canal volume before and after the instrumentation, and the amount and direction of canal transportation at 1, 3, and 5 mm from the root apex were measured by using micro-computed tomography. Data of canal volume change were statistically analyzed using one-way analysis of variance and Tukey test, while data of amount and direction of transportation were analyzed using Kruskal-Wallis and Mann-Whitney U test. Results There were no significant differences among 3 groups in terms of canal volume change (p > 0.05). For the amount of transportation, PTN showed significantly less transportation than PTU at 3 mm level (p = 0.005). VB files showed no significant difference in canal transportation at all 3 levels with either PTN or PTU files. Also, VB files showed unique inward transportation tendency in the apical area. Conclusions Other than PTN produced less amount of transportation than PTU at 3 mm level, all 3 file systems showed similar level of canal volume change and transportation, and VB file system could prepare the curved canals without significant shaping errors. PMID:29487834

Craniopharyngeal canal and its spectrum of pathology.

PubMed

Abele, T A; Salzman, K L; Harnsberger, H R; Glastonbury, C M

2014-04-01

The craniopharyngeal canal is a rare, well-corticated defect through the midline of the sphenoid bone from the sellar floor to the anterosuperior nasopharyngeal roof. We reviewed a series of craniopharyngeal canals to determine a system of classification that might better our understanding of this entity, highlight the range of associated pathologic conditions, and optimize patient treatment. Available MR imaging, CT, and clinical data (from 1989-2013) of 29 patients (10 female, 15 male, 4 unknown; median age, 4 years; age range, 1 day-65 years) with craniopharyngeal canals were retrospectively examined. Qualitative assessment included orthotopic or ectopic adenohypophysis and the presence of a tumor and/or cephalocele. The midpoint anteroposterior diameter was measured. Clinical and imaging data were evaluated for pituitary dysfunction and accompanying anomalies. Craniopharyngeal canals were qualitatively separated into 3 types: incidental canals (type 1); canals with ectopic adenohypophysis (type 2); and canals containing cephaloceles (type 3A), tumors (type 3B), or both (type 3C), including pituitary adenoma, craniopharyngioma, dermoid, teratoma, and glioma. Quantitative evaluation showed a significant difference (P < .0001) in the anteroposterior diameters of type 1 canals (median, 0.8; range, 0.7-1.1 mm), type 2 canals (median, 3.9, range, 3.5-4.4 mm), and type 3 canals (median, 9.0; range, 5.9-31.0 mm) imparting small, medium, and large descriptors. Canals with cephaloceles all contained an ectopic adenohypophysis. The craniopharyngeal canals were associated with pituitary dysfunction (6/29) and congenital anomalies (8/29). Accurate diagnosis and classification of craniopharyngeal canals are valuable to characterize lesions requiring surgery, identify patients with potential pituitary dysfunction, and avoid iatrogenic hypopituitarism or CSF leak during surgical resection of nasopharyngeal masses.

[Scanning electron microscopy investigation of canal cleaning after canal preparation with nickel titanium files].

PubMed

Brkanić, Tatjana; Ivana, Stojsin; Vukoje, Karolina; Zivković, Slavoljub

2010-01-01

Root canal preparation is the most important phase of endodontic procedure and it consists of adequate canal space cleaning and shaping. In recent years, rotary instruments and techniques have gained importance because of the great efficacy, speed and safety of the preparation procedure. The aim of this research was to investigate the influence of different NiTi files on the canal wall cleaning quality, residual dentine debris and smear layer. The research was conducted on extracted human teeth in vitro conditions. Teeth were divided in 7 main groups depending on the kind of instruments used for root canal preparation: ProTaper, GT, ProFile, K-3, FlexMaster, hand ProTaper and hand GT. Root canal preparation was accomplished by crown-down technique. Prepared samples were assessed on scanning electron microscopy JEOL, JSM-6460 LV. The evaluation of dentine debris was done with 500x magnification, and the evaluation of smear layer with 1,000 times magnification. Quantitive assessment of dentine debris and smear layer was done according to the criteria of Hulsmann. The least amount of debris and smear layer has been found in canals shaped with ProFile instruments, and the largest amount in canals shaped with FlexMaster instruments. Canal cleaning efficacy of hand GTand ProTaperfiles has been similar to cleaning efficacy of rotary NiTi files. Statistic analysis has shown a significant difference in amount of dentine debris and smear layer on the canal walls between sample groups. shaped with different instruments. Completely clean canals have not been found in any tested group of instruments. The largest amount of debris and smear layer has been found in the apical third of all canals. The design and the type of endodontic instruments influence the efficacy of the canal cleaning.

Micro-Computed Tomography Analysis of the Root Canal Morphology of Palatal Roots of Maxillary First Molars.

PubMed

Marceliano-Alves, Marília; Alves, Flávio Rodrigues Ferreira; Mendes, Daniel de Melo; Provenzano, José Claudio

2016-02-01

A thorough knowledge of root canal anatomy is critical for successful root canal treatments. This study evaluated the internal anatomy of the palatal roots of maxillary first molars with micro-computed tomography (microCT). The palatal roots of extracted maxillary first molars (n = 169) were scanned with microCT to determine several anatomic parameters, including main canal classification, lateral canal occurrence and location, degree of curvature, main foramen position, apical constriction presence, diameters 1 and 2 mm from the apex and 1 mm from the foramen, minor dentin thickness in those regions, canal volume, surface area, and convexity. All canals were classified as Vertucci type I. The cross sections were oval in 61% of the canals. Lateral canals were found in 25% of the samples. The main foramen did not coincide with the root apex in 95% of the cases. Only 8% of the canals were classified as straight. Apical constriction was identified in 38% of the roots. The minor and major canal diameters and minor dentin thickness were decreased near the apex. The minor dentin thickness 1 mm from the foramen was 0.82 mm. The palatal canals exhibited a volume of 6.91 mm(3) and surface area of 55.31 mm(2) and were rod-shaped. The root canals of the palatal roots were classified as type I. However, some factors need to be considered during the treatment of these roots, including the frequent ocurrence of moderate/severe curvatures, oval-shaped cross-sections, and lateral canals, noncoincidence of the apical foramen with the root apex, and absence of apical constriction in most cases. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

The Kra Canal: An Analysis of a Foreign Policy Alternative for the United States Navy in the Indian Ocean

DTIC Science & Technology

1975-03-01

construction and operation of the canal. The minimal advantages offered by the canal over the existing passages through the Malay Peninsula-Indonesian...was analyzed with respect to the advantages and costs that would result from U.S. participa- tion in the construction and operation of the canal. The...Present Status of the Canal -------------- 28 3. Motivating Factors for the Canal ..........- 31 4. Construction ----------------------------- 34 5

Dorello's Canal for Laymen: A Lego-Like Presentation.

PubMed

Ezer, Haim; Banerjee, Anirban Deep; Thakur, Jai Deep; Nanda, Anil

2012-06-01

Objective Dorello's canal was first described by Gruber in 1859, and later by Dorello. Vail also described the anatomy of Dorello's canal. In the preceding century, Dorello's canal was clinically important, in understanding sixth nerve palsy and nowadays it is mostly important for skull base surgery. The understanding of the three dimensional anatomy, of this canal is very difficult to understand, and there is no simple explanation for its anatomy and its relationship with adjacent structures. We present a simple, Lego-like, presentation of Dorello's canal, in a stepwise manner. Materials and Methods Dorello's canal was dissected in five formalin-fixed cadaver specimens (10 sides). The craniotomy was performed, while preserving the neural and vascular structures associated with the canal. A 3D model was created, to explain the canal's anatomy. Results Using the petrous pyramid, the sixth nerve, the cavernous sinus, the trigeminal ganglion, the petorclival ligament and the posterior clinoid, the three-dimensional structure of Dorello's canal was defined. This simple representation aids in understanding the three dimensional relationship of Dorello's canal to its neighboring structures. Conclusion Dorello's canal with its three dimensional structure and relationship to its neighboring anatomical structures could be reconstructed using a few anatomical building blocks. This method simplifies the understanding of this complex anatomical structure, and could be used for teaching purposes for aspiring neurosurgeons, and anatomy students.

Dorello's Canal for Laymen: A Lego-Like Presentation

PubMed Central

Ezer, Haim; Banerjee, Anirban Deep; Thakur, Jai Deep; Nanda, Anil

2012-01-01

Objective Dorello's canal was first described by Gruber in 1859, and later by Dorello. Vail also described the anatomy of Dorello's canal. In the preceding century, Dorello's canal was clinically important, in understanding sixth nerve palsy and nowadays it is mostly important for skull base surgery. The understanding of the three dimensional anatomy, of this canal is very difficult to understand, and there is no simple explanation for its anatomy and its relationship with adjacent structures. We present a simple, Lego-like, presentation of Dorello's canal, in a stepwise manner. Materials and Methods Dorello's canal was dissected in five formalin-fixed cadaver specimens (10 sides). The craniotomy was performed, while preserving the neural and vascular structures associated with the canal. A 3D model was created, to explain the canal's anatomy. Results Using the petrous pyramid, the sixth nerve, the cavernous sinus, the trigeminal ganglion, the petorclival ligament and the posterior clinoid, the three-dimensional structure of Dorello's canal was defined. This simple representation aids in understanding the three dimensional relationship of Dorello's canal to its neighboring structures. Conclusion Dorello's canal with its three dimensional structure and relationship to its neighboring anatomical structures could be reconstructed using a few anatomical building blocks. This method simplifies the understanding of this complex anatomical structure, and could be used for teaching purposes for aspiring neurosurgeons, and anatomy students. PMID:23730547

ROUTING DEMAND CHANGES TO USERS ON THE WM LATERAL CANAL WITH SACMAN

USDA-ARS?s Scientific Manuscript database

Most canals have either long travel times or insufficient in-canal storage to operate on-demand. Thus, most flow changes must be routed through the canal. Volume compensation has been proposed as a method for easily applying feedforward control to irrigation canals. SacMan (Software for Automated Ca...

2. View looking northeast; Dundee Canal headgates and guardlock in ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. View looking northeast; Dundee Canal headgates and guardlock in foreground, Dundee Dam and Passaic River in background - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

ACHP | News

Science.gov Websites

Search skip specific nav links Home arrow News arrow March 7, 2014 C&O Canal Trust, C&O Canal along the 184.5-mile Chesapeake & Ohio (C&O) Canal, received the Advisory Council on Historic . The Canal Quarters program was created and operates through a partnership with the C&O Canal

Inverse solution of ear-canal area function from reflectance

PubMed Central

Rasetshwane, Daniel M.; Neely, Stephen T.

2011-01-01

A number of acoustical applications require the transformation of acoustical quantities, such as impedance and pressure that are measured at the entrance of the ear canal, to quantities at the eardrum. This transformation often requires knowledge of the shape of the ear canal. Previous attempts to measure ear-canal area functions were either invasive, non-reproducible, or could only measure the area function up to a point mid-way along the canal. A method to determine the area function of the ear canal from measurements of acoustic impedance at the entrance of the ear canal is described. The method is based on a solution to the inverse problem in which measurements of impedance are used to calculate reflectance, which is then used to determine the area function of the canal. The mean ear-canal area function determined using this method is similar to mean ear-canal area functions measured by other researchers using different techniques. The advantage of the proposed method over previous methods is that it is non- invasive, fast, and reproducible. PMID:22225043

Influence of operator experience on canal preparation time when using the rotary Ni-Ti ProFile system in simulated curved canals.

PubMed

Mesgouez, C; Rilliard, F; Matossian, L; Nassiri, K; Mandel, E

2003-03-01

The aim of this study was to determine the influence of operator experience on the time needed for canal preparation when using a rotary nickel-titanium (Ni-Ti) system. A total of 100 simulated curved canals in resin blocks were used. Four operators prepared a total of 25 canals each. The operators included practitioners with prior experience of the preparation technique, and practitioners with no experience. The working length for each instrument was precisely predetermined. All canals were instrumented with rotary Ni-Ti ProFile Variable Taper Series 29 engine-driven instruments using a high-torque handpiece (Maillefer, Ballaigues, Switzerland). The time taken to prepare each canal was recorded. Significant differences between the operators were analysed using the Student's t-test and the Kruskall-Wallis and Dunn nonparametric tests. Comparison of canal preparation times demonstrated a statistically significant difference between the four operators (P < 0.001). In the inexperienced group, a significant linear regression between canal number and preparation time occurred. Time required for canal preparation was inversely related to operator experience.

Endodontic management of C-shaped root canal system of mandibular first molar by using a modified technique of self-adjusting file system.

PubMed

Helvacioglu-Yigit, Dilek

2015-01-01

C-shaped canal system is a seldom-found root canal anatomy which displays a challenge in all stages of endodontic treatment. According to the literature, this type of canal morphology is not a common finding in the mandibular first molar teeth. This case report presents endodontic management of a mandibular first molar with a C-shaped canal system. Root canal system was cleaned and shaped by nickel-titanium (NiTi) rotary instruments combined with self-adjusting file (SAF). Obturation was performed using warm, vertical condensation combined with the injection of warm gutta-percha. Follow-up examination 12 months later showed that the tooth was asymptomatic. The radiological findings presented no signs of periapical pathology. The clinician must be aware of the occurence and complexity of C-shaped canals in mandibular first molar teeth to perform a successful root canal treatment. The supplementary use of SAF after application of rotary instruments in C-shaped root canals might be a promising approach in endodontic treatment of this type of canal morphology.

A comparative evaluation of the increase in root canal surface area and canal transportation in curved root canals by three rotary systems: A cone-beam computed tomographic study

PubMed Central

Prasanthi, Nalam NVD; Rambabu, Tanikonda; Sajjan, Girija S; Varma, K Madhu; Satish, R Kalyan; Padmaja, M

2016-01-01

Aim: The aim of this study was to measure the increase in root canal surface area and canal transportation after biomechanical preparation at 1, 3, and 5 mm short of the apex with three different rotary systems in both continuous rotary and reciprocating rotary motions. Materials and Methods: Sixty freshly extracted human mandibular molars with mesial root canal curvatures between 20° and 30° were included in the study. Teeth were randomly distributed into three groups (n = 20). Biomechanical preparations were done in all the mesial canals. In Group 1, instrumentation was done with ProTaper universal rotary files, Group 2, with K3XF rotary files, and Group 3, with LSX rotary files. Each group was further subdivided into subgroups A and B (n = 10) where instrumentation was done by continuous rotary and reciprocating rotary techniques, respectively. Increase in root canal surface area and canal transportation was measured using the preoperative and postoperative cone-beam computed tomography scans. Statistical Analysis: The data were analyzed by one-way ANOVA followed by Tukey pairwise multiple comparison tests. Results: Increase in root canal surface area was significantly more (P < 0.05) in ProTaper and K3XF groups when compared to LSX group. Canal transportation was significantly more (P < 0.05) in ProTaper group when compared to K3XF and LSX groups. There was no significant difference (P > 0.05) in increase of root canal surface area and canal transportation between continuous rotary and reciprocating rotary techniques for ProTaper Universal, K3XF and LSX groups. Conclusion: LSX rotary system showed minimal increase of root canal surface area and minimal canal transportation when compared to ProTaper and K3XF rotary systems. PMID:27656062

Canal preparation with nickel-titanium or stainless steel instruments without the risk of instrument fracture: preliminary observations.

PubMed

Yared, Ghassan

2015-02-01

This report introduces a novel technique that allows a safe and predictable canal negotiation, creation of a glide path and canal preparation with reciprocating nickel-titanium or stainless steel engine-driven instruments in canals where the use of rotary and the newly developed reciprocating instruments is contraindicated. In this novel technique, the instruments are used in reciprocating motion with very small angles. Hand files are not used regardless of the complexity of the canal anatomy. It also allows achieving predictable results in canal negotiation and glide path creation in challenging canals without the risk of instrument fracture.

Endodontic management of a mandibular first molar with six root canal systems.

PubMed

Jain, Dilip; Reddy, Smitha; Venigalla, Bhuvan Shome; Kamishetty, Shekhar

2015-01-01

Internal anatomy of pulp is complex. The first mandibular molars typically have two roots, one mesial with two root canals and another distal root, which contains one or two canals. A 20-year-old female patient reported with intermittent pain and incomplete root canal treatment in left lower back region since 1-week. Refined access cavity revealed initially two canals in mesial and two canals in the distal root. With operating microscope and cone beam computerized tomography, two additional canals (L-mesio-buccal and B-mesio-lingual) were identified in mesial root. One-year follow-up showed patient was asymptomatic and complete healing of periapical radiolucency.

Canal preparation with nickel-titanium or stainless steel instruments without the risk of instrument fracture: preliminary observations

PubMed Central

2015-01-01

This report introduces a novel technique that allows a safe and predictable canal negotiation, creation of a glide path and canal preparation with reciprocating nickel-titanium or stainless steel engine-driven instruments in canals where the use of rotary and the newly developed reciprocating instruments is contraindicated. In this novel technique, the instruments are used in reciprocating motion with very small angles. Hand files are not used regardless of the complexity of the canal anatomy. It also allows achieving predictable results in canal negotiation and glide path creation in challenging canals without the risk of instrument fracture. PMID:25671218

Cone-beam computed tomography analysis of curved root canals after mechanical preparation with three nickel-titanium rotary instruments

PubMed Central

Elsherief, Samia M.; Zayet, Mohamed K.; Hamouda, Ibrahim M.

2013-01-01

Cone beam computed tomography is a 3-dimensional high resolution imaging method. The purpose of this study was to compare the effects of 3 different NiTi rotary instruments used to prepare curved root canals on the final shape of the curved canals and total amount of root canal transportation by using cone-beam computed tomography. A total of 81 mesial root canals from 42 extracted human mandibular molars, with a curvature ranging from 15 to 45 degrees, were selected. Canals were randomly divided into 3 groups of 27 each. After preparation with Protaper, Revo-S and Hero Shaper, the amount of transportation and centering ability that occurred were assessed by using cone beam computed tomography. Utilizing pre- and post-instrumentation radiographs, straightening of the canal curvatures was determined with a computer image analysis program. Canals were metrically assessed for changes (surface area, changes in curvature and transportation) during canal preparation by using software SimPlant; instrument failures were also recorded. Mean total widths and outer and inner width measurements were determined on each central canal path and differences were statistically analyzed. The results showed that all instruments maintained the original canal curvature well with no significant differences between the different files (P = 0.226). During preparation there was failure of only one file (the protaper group). In conclusion, under the conditions of this study, all instruments maintained the original canal curvature well and were safe to use. Areas of uninstrumented root canal wall were left in all regions using the various systems. PMID:23885273

An in vitro evaluation of the degree of pulp tissue dissolution through different root canal irrigation protocols.

PubMed

Amato, Massimo; Pantaleo, Giuseppe; Abtellatif, Dina; Blasi, Andrea; Gagliani, Massimo; Iandolo, Alfredo

2018-01-01

The aim of this study is to evaluate in vitro , using artificial lateral canals, the rate of dissolution of the pulp tissue through different protocols of canal irrigation. One hundred artificial canals provided with lateral canals have been used. Each lateral canal was filled with pulp tissue and calibrated to 0.002 mg. All canals were irrigated using five different protocols. Five groups have been used for the experiment: Group A, distilled water (control); Group B, preheated NaOCl; Group C, NaOCl heated inside the canal; Group D, NaOCl ultrasonically activated; and Group E, NaOCl heated inside the canal with ultrasonic activation. All samples were weighed through professional microbalance in three different phases: before insertion of the pulp tissue into the lateral canal, after insertion of the pulp tissue and, finally, after different protocols of irrigation. A statistical analysis with Kruskal-Wallis test and Mann-Whitney test was performed. The partial dissolution of the pulp tissue inside the artificial lateral canal occurs only using the protocol with NaOCl heated inside the canal with ultrasonic activation. Other irrigation protocols are not able to dissolve the pulp tissue. The main objective of endodontic therapy is the removal of damaged tissues and bacteria. Modern literature highlights that it is impossible to remove all the pulp tissues and bacteria from the whole endodontic space. Hence, to achieve excellence and get positive results in the short and long term, it is necessary to use techniques and technologies that may increase the degree of root canal detersion.

Context view, looking southwest along the WelltonMohawk Canal. The wasteway ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Context view, looking southwest along the Wellton-Mohawk Canal. The wasteway is marked by the white posts on either side of the access road. The pipe across the canal safely carries storm runoff over the canal and is not part of Wasteway No. 1 - Wellton-Mohawk Irrigation System, Wasteway No. 1, Wellton-Mohawk Canal, North side of Wellton-Mohawk Canal, bounded by Gila River to North & the Union Pacific Railroad & Gila Mountains to south, Wellton, Yuma County, AZ

[A mandibular second molar with three mesial roots: report of one case].

PubMed

Zhang, Ping

2010-02-01

A case of unusual root canal morphology was presented to demonstrate anatomic variations in mandibular second molars. This case report presented the endodontic therapy of a mandibular second molar with three canals in the mesial root. A mesial middle canal was found between the mesiobuccal and mesiolingual canals. This report indicated the importance of looking for additional canals and unusual canal morphology, because knowledge of their existence might occasionally enable clinicians to treat a case successfully that otherwise to fail.

Comparison Of Pre-Operative Curvature With Postoperative Curvature In Root Canals Treated With K-3 Rotary Systems.

PubMed

Nagi, Sana Ehsen; Khan, Farhan Raza

2017-01-01

With root canal treatment, the organic debris and micro-organisms from pulp space is removed and an ideal canal preparation is achieved that is conducive of hermetic obturation. The purpose of this study was to correlate the pre-operative canal curvature with the postoperative curvature in human extracted teeth prepared with K-3 rotary systems. The root canal preparation was carried out on extracted human molars and premolars using K-3 endodontic rotary files. A pre and post-operative image of the teeth using digital radiograph were taken in order to compare pre and post-operative canal curvature. The images were saved in an images retrieval system (Gendex software, USA). Change in the canal curvature was measured using the software measuring tool (Vixwin software, USA). Student paired t-test and Pearson correlation test was applied at 0.05 level of significance. There is a statistically significant difference between pre-operative and post-operative canal curvature (p-value <0.001) and a strong positive correlation (91% correlation) between pre-operative and post-operative canal curvature in teeth prepared with the K-3 rotary files. A significant difference between pre and post instrumentation curvature was found. Degree of canal curvature was not correlated with time taken for canal preparation.

Your baby in the birth canal

MedlinePlus

... lie; Fetal attitude; Fetal descent; Fetal station; Cardinal movements; Labor-birth canal; Delivery-birth canal ... are used to describe your baby's position and movement through the birth canal. FETAL STATION Fetal station ...

Water Environment Evolution along the China Grand Canal

NASA Astrophysics Data System (ADS)

Mao, F.; Wu, Y. X.; Yang, B. F.; Li, X. J.

2014-03-01

The China Grand Canal is one of the earliest canals in the world, having lasted for nearly 3000 years. Even its section canals have a rich history, such as the North-South Grand Canal that was established during the Sui Dynasty, whereas the Beijing-Hangzhou Canal was excavated during the Yuan Dynasty and the east line of the South-to-North Water Diversion. As one of the longest in the world, the China Grand Canal's total length is over 3500 kilometers. This length includes the navigable, unnavigable, and underground sections. Making the best use of situations and according to local conditions, the Chinese people harmoniously constructed the Beijing-Hangzhou Canal with nature. Tens of millions of workers took nearly 3000 years to complete the great shipping system. Navigable sections still exist for up to 900 kilometers and the volume of freight traffic is approximately 300 million tons. The canal remains the main logistical channel of the North-to-South Coal Transportation, South-to-North Water Diversion, and resources circulation. To date, China is promoting the success of heritage application. Part of these efforts is the declaration of the China Grand Canal as a World Cultural Heritage by 2014. In addition, the east route of the South-to-North Water Transfer project is planned to be navigable by 2016. The ancient Beijing-Hangzhou Grand Canal will usher in the new ecological civilization and cultural revival along the canal. This paper presents technical methods of water environment evolution research on the river system, river, and water quality along the Beijing-Hangzhou Canal through the integration of historical literature and modern remote sensing image data. The study carried out water environment investigation and analysis along the Beijing-Hangzhou canal by using ETM, SPOT image data, and GPS measurement data. Spatial and temporal evolution characteristics and regulations of the Beijing-Hangzhou Grand Canal regional water environment in the span of 3000 years were obtained. As a key national cultural relic, candidate of the world cultural heritage, and route of the South-to-North Water Diversion, the China Great Canal is a worthy subject of a study. Results presented in this paper therefore have high realistic significance.

158. Photocopy of transit book (taken from Twin Falls Canal ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

158. Photocopy of transit book (taken from Twin Falls Canal Company Transit Book #404T, Page 3, #46, Division One). START OF MAIN CANAL SURVEY, TWIN FALLS COUNTY, MILNER, IDAHO. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

177. Photocopy of Photograph, Twin Falls Canal Company, Bisbee Photo, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

177. Photocopy of Photograph, Twin Falls Canal Company, Bisbee Photo, September, 1912. Photographer unknown. COTTONWOOD FLUME, HIGH LINE CANAL, TWIN FALLS COUNTY, SOUTH OF KIMBERLY, IDAHO; SOUTH VIEW FROM UPPER SIDE. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

46 CFR 69.7 - Vessels transiting the Panama and Suez Canals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Vessels transiting the Panama and Suez Canals. 69.7... MEASUREMENT OF VESSELS MEASUREMENT OF VESSELS General § 69.7 Vessels transiting the Panama and Suez Canals. (a... Canal must be measured and certificated under the Arab Republic of Egypt Suez Canal Authority Rules of...

7. 'FLOW IN CANAL NO. 1, A JOINTLY USED CANAL, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. 'FLOW IN CANAL NO. 1, A JOINTLY USED CANAL, ON MAY 22 WHEN 210 SECOND FEET OF WATER WAS FLOWING. THIS WAS LATER INCREASED TO 240 SECOND FEET FOR A NUMBER OF DAYS TO SATISFY THE DEMANDS OF THE DRY GULCH COMPANY.' 1925 - Irrigation Canals in the Uinta Basin, Duchesne, Duchesne County, UT

[Shaping ability of multi-taper nickel-titanium files in simulated resin curved root canal].

PubMed

Luo, Hong-Xia; Huang, Ding-Ming; Jia, Liu-He; Luo, Shi-Gao; Gao, Xiao-Jie; Tan, Hong; Zhou, Xue-Dong

2006-08-01

To compare the shaping ability of ISO standard stainless steel K files and multi-taper ProTaper nickel-titanium files in simulated resin curved root canals. METHODS Thirty simulated resin root canals were randomly divided into three groups and prepared by stainless steel K files, hand ProTaper, rotary ProTaper, respectively. The amount of material removed from inner and outer wall and canal width after canal preparation was measured, while the canal curvature before and after canal preparation and canals aberrations were recorded. The stainless steel K files removed more material than hand ProTaper and rotary ProTaper at the outer side of apex and inner side of curvature (P < 0.05). The mean degree of straightening in stainless steel K files group was significantly bigger than in ProTaper group (P < 0.05). The canals prepared by ProTaper had no evident aberration. The shaping ability of ProTaper is better than stainless steel K files.

3. August, 1971. VIEW ALONG CANAL SHOWING BORDER PATH AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. August, 1971. VIEW ALONG CANAL SHOWING BORDER PATH AND BRIDGE FOR INSPECTION - ABOUT ONE MILE FROM CANAL HEAD. - Hurricane Irrigation Canal, State Route 15 Vicinity, Hurricane, Washington County, UT

Mandibular first premolar with four canals.

PubMed

Du, Yi; Lee, Angeline H C; Zhang, Chengfei

2013-02-01

A case of endodontic treatment of a mandibular first premolar exhibiting a total of four distinct root canals and four apical foramina is described. This occurrence in mandibular first premolar has rarely been reported in the endodontic literature. Endodontic treatment that considers the anatomic variation of root canal morphology is important to ensure a favorable healing outcome, and its identification could be enhanced by careful examination using a dental operating microscope. Obturation of root canals using a warm vertical compaction technique with a highly-radiopaque root canal sealer, such as AH Plus, after careful ultrasonic activated irrigation with ethylenediaminetetraacetic acid might allow the flow of sealer into the narrowed but unprepared part of the canal. This offers valuable adjuncts for the successful negotiation of calcified main canals, thereby facilitating optimum chemo-mechanical debridement of the root canal system. © 2013 Blackwell Publishing Asia Pty Ltd.

A mandibular third molar with three mesial roots: a case report.

PubMed

Plotino, Gianluca

2008-02-01

Although its most common configuration is 2 roots and 3 root canals, mandibular molars might have many different combinations. A case of unusual root canal morphology is presented to demonstrate anatomic variations in mandibular molars. Endodontic therapy was performed in a mandibular third molar with 3 separate mesial roots. The appearance of the pulp chamber floor revealed 4 separate canal orifices. Radiographically the 4 root canals ended in their own distinct foramen. Many reports deal with 3 orifices or 3 independent canals in the mesial root, but none described 3 mesial canals in 3 separate mesial roots, indicating a rare anatomic configuration. This report points out the importance of looking for additional canals and unusual canal morphology, because knowledge of their existence might occasionally enable clinicians to treat a case successfully that otherwise might have ended in failure.

[Comparative study of root canal morphology of mandibular first premolar by micro-CT and radio visio graphy].

PubMed

Li, Xiangjie; Liu, Na; Liu, Rui; Dong, Zhengmou; Liu, Luchuan; Deng, Manjing

2012-02-01

To compare the consistency of root canal configuration types of mandibular first premolar by using micro-CT and radio visio graphy (RVG). One hundred extracted mandibular first premolars with complete dental root and apex which received no endodontic treatment were randomly selected. Each tooth was radiographed with RVG through a buccolingual and mesiodistal direction, and then scanned with micro-CT and reconstructed. The classifications of the root canal types according to Vertucci's type with the two methods were compared. The canal patterns were classified as type I (67%), type III (3%), type V (18%), type VII (2%), additional type (10%) with micro-CT and canal patterns as type I (71%), type III (2%), type V (23%), type VII (1%), additional type (3%) with RVG. 63% of teeth showed one canal in both micro-CT and RVG. Only 25% of teeth were diagnosed as complex canal by the same canal type in both micro-CT and RVG. The Kappa value between micro-CT and RVG was 0.541 which suggested that the two kinds of methods had intermediate consistency. 82.8% of the premolars with root groove had two or more than two canals. Although RVG can basically reflect the root canal system type of the mandibular first premolars in vitro, it offers poor accuracy images to complex root canals. Micro-CT three-dimensional images could clearly and precisely display the root canal system morphology of the mandibular first pre-molars in vitro.

Root Canal Anatomy and Morphology of Mandibular First Molars in a Selected Iranian Population: An In Vitro Study

PubMed Central

Mohammadzadeh Akhlaghi, Nahid; Khalilak, Zohreh; Vatanpour, Mehdi; Mohammadi, Saman; Pirmoradi, Sakineh; Fazlyab, Mahta; Safavi, Kamran

2017-01-01

Introduction: The aim of this study was to evaluate root canal anatomy of mandibular first molars (MFM) in a selected Iranian Population using clearing technique. Methods and Materials: A total of 150 extracted MFMs were cleared. The root canal morphology (including the root numbers and root length) and the anatomy of the root canal system (including is the number and type of canals based on Vertucci’s classification, canal curvature according to Schneider's method and the presence of isthmus) was evaluated using the buccolingual and mesiodistal parallel x-rays and stereomicroscope. The data were analyzed using the chi-square test. Results: Two and three roots were present in 96.7% and 33% of the teeth, respectively (P=0.0001). All the teeth (100%) had two canals in the mesial root, while 61.3% of the samples had one distal root canal (P=0.006). The root canal configuration in the mesial canal included type IV (55.3%) and type II (41.3%) (P=0.0001). In doubled-canalled distal roots, 68.8% and 24.3% were type II and type IV, respectively (P=0.0001). Isthmii were observed in 44.6% of mesial and 27.3% of distal roots (P=0.0001). Conclusion: The notable prevalence of type IV configuration in both roots of mandibular first molars, presence of isthmus and root curvature, necessitates the careful negotiation and cleaning of all accessible canal spaces. PMID:28179932

Root canal irrigants

PubMed Central

Kandaswamy, Deivanayagam; Venkateshbabu, Nagendrababu

2010-01-01

Successful root canal therapy relies on the combination of proper instrumentation, irrigation, and obturation of the root canal. Of these three essential steps of root canal therapy, irrigation of the root canal is the most important determinant in the healing of the periapical tissues. The primary endodontic treatment goal must thus be to optimize root canal disinfection and to prevent reinfection. In this review of the literature, various irrigants and the interactions between irrigants are discussed. We performed a Medline search for English-language papers published untill July 2010. The keywords used were ‘root canal irrigants’ and ‘endodontic irrigants.’ The reference lists of each article were manually checked for additional articles of relevance. PMID:21217955

150. Photocopy of drawing (taken from Twin Falls Canal Company ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

150. Photocopy of drawing (taken from Twin Falls Canal Company Surveyor's Book #363, Page 42, entitled, 'Diversion Tunnels', located in Twin Falls Canal Company office, Twin Falls, Idaho). PLAN OF DIVERSION TUNNELS, MILNER DAM. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

180. Photocopy of Photograph, Twin Falls Canal Company. E. Pettygro, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

180. Photocopy of Photograph, Twin Falls Canal Company. E. Pettygro, Photographer, date unknown. BLASTING TWIN FALLS CANAL, TWIN FALLS COUNTY; BLASTING COTTONWOOD AREA TO REPLACE FLUME BY RUNNING HIGH LINE THROUGH SOLID ROCK. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

Canal switch and re-entry phenomenon in benign paroxysmal positional vertigo: difference between immediate and delayed occurrence.

PubMed

Dispenza, F; DE Stefano, A; Costantino, C; Rando, D; Giglione, M; Stagno, R; Bennici, E

2015-04-01

This prospective study was designed to evaluate the differences between immediate and delayed canal re-entry of otoliths after therapeutic manoeuvres in patients with benign paroxysmal positional vertigo (BPPV). A total of 196 patients with BPPV were visited and 127 matched our inclusion criteria. The mean age was 54.74 years. The horizontal semicircular canal (HSC) was involved in 30 cases and the posterior semicircular canal (PSC) in 97 patients. Patients with hearing loss in the ear affected by BPPV have a more recurrent form, compared to those with normal hearing. An immediate canal re-entry was recorded in 3 patients with HSC BPPV, all with geotropic nystagmus. In 7 patients with PSC BPPV, the immediate canal re-entry was detected and the delayed form was noted in 5 patients. The patients with the delayed canal re-entry underwent more than 2 previous manoeuvres. The canal re-entry was not related to the manoeuvre performed. The timing of the Dix-Hallpike test to verify the resolution of the BPPV had a significant role in immediate canal re-entry. A recurrence in the follow-up at least one month after treatment was recorded in 20 patients and was more frequent in patients that had canal re-entry. The canal re-entry or canal switch is a clinical entity that should be kept in mind of the neurotologist when approaching BPPV patients. It is important to distinguish it from recurrence when delayed and from manoeuvre failure when immediate. The timing of manoeuvre performing, in particular the final verification test after therapeutic sessions, is important to prevent the immediate reflux of particles into canals.

Interrelationships in the Variability of Root Canal Anatomy among the Permanent Teeth: A Full-Mouth Approach by Cone-Beam CT

PubMed Central

Peters, Ove A.; Maury, Elisabeth; Telmon, Norbert; Georgelin-Gurgel, Marie; Maret, Delphine

2016-01-01

Objectives In endodontic practice, clinicians should be aware of possible root canal anatomic variations. The aim of this study was to assess using CBCT acquisitions regarding whether one root canal anatomy of a tooth is associated with a specific anatomy of another tooth. Methods A total of 106 CBCT acquisitions were obtained using a CBCT scanner with 200μm voxel size. Numbers of roots and canals of the entire dentition were described. Bivariate analyses and logistic regressions were conducted to explore root canal anatomy on one tooth according to age, gender, jaw, side and the others teeth. Multiple correspondence analysis (MCA) was performed to correlate the different numbers of canals profiles. Results A total of 2424 teeth were analyzed. Independently from the other variables, the presence of an additional root canal on a mandibular incisor increases the risk of having an additional root canal on a mandibular premolar (OR [95%] 3.7 [1.0;13.2]). The mandibular molar variability increases in women compared to men (OR [95%] 0.4 [0.1; 0.9]). MCA showed correspondence between 2-canals maxillary incisor and canines and 5-canals maxillary molars, and some correlation between additional canal on maxillary and mandibular premolars. Conclusions Although CBCT examinations are conducted in the first intention of making a diagnosis or prognostic evaluation, medium FOV acquisitions could be used as an initial database thus furnishing preliminary evaluations and information. In endodontic practice, clinicians should be aware of possible root canal anatomic variations. The visualization of all canals is considered essential in endodontic therapy. The use of multi-correspondence analysis for statistics in endodontic research is a new approach as a prognostic tool. PMID:27764246

Lock No. 1 St. Lucie Canal. Upper gate structure, masonry ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Lock No. 1- St. Lucie Canal. Upper gate structure, masonry plan- masonry elevations. - St. Lucie Canal, St. Lucie Lock No. 1, St. Lucie, Cross State Canal, Okeechobee Intracoastal Waterway, Stuart, Martin County, FL

2. BLACK RIVER CANAL SUPPLY FROM END OF MAIN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. BLACK RIVER CANAL - SUPPLY FROM END OF MAIN CANAL TO BLACK RIVER. VIEW TO SOUTHWEST - Carlsbad Irrigation District, Black River Canal, 15 miles Southeast of Carlsbad near Malaga, Carlsbad, Eddy County, NM

Dundee Canal Industrial Historic District, Beginning at George Street in ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

A randomized, blinded study of canal wall up versus canal wall down mastoidectomy determining the differences in viewing middle ear anatomy and pathology.

PubMed

Hulka, G F; McElveen, J T

1998-09-01

Canal wall down and intact canal wall tympanomastoidectomy represent two surgical approaches to middle ear pathology. The authors hypothesize that there is a difference in the ability to view structures in the middle ear between these two methods. Depending on the individual, many surgeons have used the two different techniques of intact canal wall and canal wall down tympanomastoidectomy for approaching the middle ear. However, opinions conflict as to which approach provides the best visualization of different locations in the middle ear. This study prospectively evaluated temporal bones to determine the differences in visualizing structures of the middle ear using these two approaches. Twelve temporal bones underwent a standardized canal wall down tympanomastoidectomy using a reversible canal wall down technique. All bones were viewed in two dissections: intact canal wall and canal wall down preparations. Four points previously had been marked on each temporal bone in randomly assigned colors. These points include the sinus tympani, posterior crus of stapes, lateral epitympanum, and the Eustachian tube orifice. An observer blinded to the purpose of the study, color, and number of locations recorded the color and location of marks observed within the temporal bones. Randomized bones of two separate settings were viewed such that each bone was viewed in both the canal wall down and the intact canal wall preparations. A significant difference was noted in the ability to observe middle ear pathology between the intact canal wall versus canal wall down tympanomastoidectomy, with the latter showing superiority (p < 0.001). Of the four subsites, the sinus tympani, posterior crus of stapes, and lateral epitympanum were observed more frequently with the canal wall down. There was no significant difference in the ability to observe the Eustachian tube orifice between the two techniques. Statistical analysis shows good reproducibility and randomization of this study. The canal wall down tympanomastoidectomy allowed for superior viewing of the three locations, sinus tympanic, posterior crus of stapes, and lateral at the tympanum, as they were marked in the study. This study shows the potential for improved visualization via the canal wall down tympanomastoidectomy. A significant amount of literature written by individuals and otology group practices is available retrospectively comparing the advantages and disadvantages of intact canal wall versus canal wall down mastoidectomy procedures for approaching middle ear pathology. In the interest of objectively evaluating the differences between these two approaches, we have studied temporal bones in a prospective randomized, blinded study comparing the two. Twelve bones were used and observed twice, once in each of 2 sessions. All bones were viewed in two dissections: intact canal wall and canal wall down mastoidectomy. Four points were marked on each temporal bone in three different colors applied in a randomized order to eliminate observer expectation. The four points marked include sinus tympani, posterior crus of the stapes footplate, lateral epitympanum, and Eustachian tube orifice. Both intact canal wall and canal wall down bones were provided randomly to the observer at each viewing session. Before the observer was allowed to see the dissections, those requiring replacement of the canal for the first session of the study had this done in a method using native posterior bony canal. Temporal bones were presented to an expert otologist in a randomized fashion with each temporal bone being placed in a temporal bone bowl holder and specialized framework, allowing for rotation and repositioning approximating the experience in an operating room setting. For each temporal bone, the observer filled in a questionnaire describing his or her observations by denoting both location and color of marks observed. (ABSTRACT TRUNCATED)

Root and Root Canal Morphology of Human Third Molar Teeth.

PubMed

Mohammadi, Zahed; Jafarzadeh, Hamid; Shalavi, Sousan; Bandi, Shilpa; Patil, Shankargouda

2015-04-01

Successful root canal treatment depends on having comprehensive information regarding the root(s)/canal(s) anatomy. Dentists may have some complication in treatment of third molars because the difficulty in their access, their aberrant occlusal anatomy and different patterns of eruption. The aim of this review was to review and address the number of roots and root canals in third molars, prevalence of confluent canals in third molars, C-shaped canals, dilaceration and fusion in third molars, autotransplantation of third molars and endodontic treatment strategies for third molars.

Endodontic photodynamic therapy ex vivo

PubMed Central

Ng, Raymond; Singh, Fiza; Papamanou, Despoina A.; Song, Xiaoqing; Patel, Chitrang; Holewa, Colleen; Patel, Niraj; Klepac-Ceraj, Vanja; Fontana, Carla R.; Kent, Ralph; Pagonis, Tom C.; Stashenko, Philip P.; Soukos, Nikolaos S.

2010-01-01

Objective To evaluate the anti-microbial effects of photodynamic therapy (PDT) on infected human teeth ex vivo. Materials and Methods Fifty-two freshly extracted teeth with pulpal necrosis and associated periradicular radiolucencies were obtained from 34 subjects. Twenty-six teeth with 49 canals received chemomechanical debridement (CMD) with 6% NaOCl and twenty-six teeth with 52 canals received CMD plus PDT. For PDT, root canal systems were incubated with methylene blue (MB) at concentration of 50 µg/ml for 5 minutes followed by exposure to red light at 665 nm with an energy fluence of 30 J/cm2. The contents of root canals were sampled by flushing the canals at baseline and following CMD alone or CMD+PDT and were serially diluted and cultured on blood agar. Survival fractions were calculated by counting colony-forming units (CFU). Partial characterization of root canal species at baseline and following CMD alone or CMD+PDT was performed using DNA probes to a panel of 39 endodontic species in the checkerboard assay. Results The Mantel-Haenszel chi-square test for treatment effects demonstrated the better performance of CMD+PDT over CMD (P=0.026). CMD+PDT significantly reduced the frequency of positive canals relative to CMD alone (P=0.0003). Following CMD+PDT, 45 of 52 canals (86.5%) had no CFU as compared to 24 of 49 canals (49%) treated with CMD (canal flush samples). The CFU reductions were similar when teeth or canals were treated as independent entities. Post-treatment detection levels for all species were markedly lower for canals treated by CMD+PDT than were for those treated by CMD alone. Bacterial species within dentinal tubules were detected in 17/22 (77.3%) and 15/29 (51.7%) of canals in the CMD and CMD+PDT group, respectively (P= 0.034). Conclusion Data indicate that PDT significantly reduces residual bacteria within the root canal system, and that PDT, if further enhanced by technical improvements, holds substantial promise as an adjunct to CMD. PMID:21238805

A study on FlexMaster : a Ni-Ti rotary engine driven system for root canal preparation.

PubMed

Alam, M S; Bashar, A K; Begumr, J A; Kinoshita, J I

2006-07-01

In the present study, the effectiveness of recently introduced rotary Nickel Titanium FlexMaster engine driven system was evaluated for cleaning and shaping of root canals in extracted human teeth and compared with that done by the Nickel Titanium Flexofile hand instruments. A total of 40 root canals from 36 extracted mandibular and maxillary teeth with curvature ranging between 20 and 30 degree were divided into two groups, consisting 20 canals in each. FlexMaster instrumentation was done in 20 canals, using crown-down technique and manual filing with Flexofile was done in other 20 canals, using conventional and step-back techniques. 5.25% sodium hypochlorite (NaOCl) solution and 17% ethelene di-amine tetra-acetic acid (EDTA) were used alternatively for irrigation after canal preparation by each instrument size. Time needed for canal preparation of individual canal was recorded. A procedural error such as instrument breakage was also noted. After preparation, all the roots were cut longitudinally by using diamond burs in turbine handpiece and examined under scanning electron microscope. Apical region was quantified for debris and smear layer based on a 5-score numerical evaluation scale. The data established for scoring the debris and smear layer and preparation time of individual canal were analyzed statistically using the Mann-Whitney U test. Completely cleaned root canals were not found with any of the two instruments and none of the instruments maintained the original canal uniformity and regular dentine surface. Because significantly less debris was found in the apical region using the manual filing technique (p< 0.05). Thus the flexmaster system was found to produce less cleaner root canal walls than manual technique. Only one FlexMaster finishing file sized 30 was separated in the apical region during preparation of 30 degree curved canal. The time taken by FlexMaster was significantly better (p< 0.01) than that of hand instruments.

Prevalence of Apical Periodontitis in Endodontically Treated Premolars and Molars with Untreated Canal: A Cone-beam Computed Tomography Study.

PubMed

Karabucak, Bekir; Bunes, Alf; Chehoud, Christel; Kohli, Meetu R; Setzer, Frank

2016-04-01

The purpose of this retrospective cohort study was to evaluate the incidence of missed canals in endodontically treated teeth in the Greater Philadelphia area patient population and to evaluate the effect of untreated canals on endodontic outcome. A total of 1397 cone-beam computed tomography (CBCT) volumes taken from January 2013 to July 2015 were investigated. Limited view CBCT images were taken with Kodak 9000 3D System field of view at voxel size, 76 μm or Morita Veraviewpocs 3D F40 field of view at voxel size, 125 μm. All root canal-treated premolars and molars were included in the study. Unfilled canals appearing from cementoenamel junction to apex including splitting from a main canal at coronal, mid, or apical third were defined as missed-untreated canal. A periapical lesion was diagnosed when disruption of the lamina dura was detected and the low density area associated with the radiographic apex was at least twice the width of the periodontal ligament space. The overall incidence of missed canals was 23.04%. The incidence of missed canals per tooth was highest in tooth #14 at 46.5% and tooth #3 at 41.3%. The incidence of missed canals was highest in the upper molars at 40.1% and lowest in the upper premolars at 9.5%. There was a significant difference in lesion prevalence when a canal was missed-untreated (P < .05). Teeth with a missed canal were 4.38 times more likely to be associated with a lesion. Limited field-of-view CBCT should be examined before any endodontic retreatment to identify missed canals. This knowledge would not only help clinicians to locate missed canals clinically but would also help in deciding the surgical approach. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Instrument separation analysis of multi-used ProTaper Universal rotary system during root canal therapy.

PubMed

Wu, Jintao; Lei, Gang; Yan, Ming; Yu, Yan; Yu, Jinhua; Zhang, Guangdong

2011-06-01

The purpose of this study was to identify the influential factors responsible for clinical instrument separation of reused ProTaper Universal rotary instruments (Dentsply Maillefer, Ballaigues, Switzerland). Six thousand one hundred fifty-four root canals in 2,654 teeth were prepared using ProTaper Universal files in endodontic clinics. Separation incidence was determined based on the number of treated teeth or canals. Data were collected including the size of fractured instrument, the length and location of a broken segment within the root canal, and the curvature of canal. The chi-square test and independent samples t test were used to determine the statistical significance. The overall instrument separation incidences were 2.6% according to the number of teeth and 1.1% according to the canal number, respectively. Separation incidences according to the number of teeth or canals were significantly higher (P < .05) in molars than those in premolars or anterior teeth. Because of its largest diameter, F3 file presented the highest separation incidence according to the number of teeth (1.0%) or canals (0.4%); 47.5% instrument separation of mandibular molars and 61.5% instrument separation of maxillary molars happened in the mesiobuccal canals. Moreover, 91.4% fragments were located in the apical third of root canals, and 54.2% instrument separation occurred in severely curved canals. There was a significant difference (P < .05) in the mean fracture length between shaping (2.42 ± 0.73 mm) and finishing files (3.32 ± 0.73 mm). Separation incidence according to the canal number is more reliable than that according to the number of teeth because of the variable canal number in different teeth. The tooth type, rotary file size, canal location, and anatomy were correlated with the instrument separation of reused ProTaper Universal files. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Regulation of drainage canals on the groundwater level in a typical coastal wetlands

NASA Astrophysics Data System (ADS)

Liu, Qiang; Mou, Xia; Cui, Baoshan; Ping, Fan

2017-12-01

Activities related to reclamation alter wetland hydrological regimes and inevitably cause changes to groundwater level, which can result in the ecological degradation of coastal wetlands. Decreasing the groundwater level by the construction of drainage canals is an approach that has been widely used to control levels of root zone soil salinity as well as to protect freshwater wetlands or to expand agricultural land area in coastal wetlands. In this study, we assessed the influences of different drainage canal designs on the groundwater level using the Visual MODFLOW (VMOD) interface. We also provided an optimized drainage canal design suitable for the Yellow River Delta (YRD). Results showed that: (i) the groundwater level decreased in areas close to drainage canals, while only negligible effects were found on the groundwater level in areas with no drainage canals; (ii) the influence of drainage canals on the groundwater level decreased as distance increased; and (iii) a drainage canal network design of a depth of 5 m, with canal configuration of north-south direction and canal spacing of 1000 m was more effective in reducing the groundwater level in the study area. Our findings indicated that changes in groundwater level by the construction of drainage canals could help in our understanding of how groundwater influences freshwater wetlands and also aid in maintaining the integrity of coastal wetlands.

Quantitative three-dimensional analysis of root canal curvature in maxillary first molars using micro-computed tomography.

PubMed

Lee, Jong-Ki; Ha, Byung-Hyun; Choi, Jeong-Ho; Heo, Seok-Mo; Perinpanayagam, Hiran

2006-10-01

In endodontic therapy, access and instrumentation are strongly affected by root canal curvature. However, the few studies that have actually measured curvature are mostly from two-dimensional radiographs. The purpose of this study was to measure the three-dimensional (3D) canal curvature in maxillary first molars using micro-computed tomography (microCT) and mathematical modeling. Extracted maxillary first molars (46) were scanned by microCT (502 image slices/tooth, 1024 X 1024 pixels, voxel size of 19.5 x 19.5 x 39.0 microm) and their canals reconstructed by 3D modeling software. The intersection of major and minor axes in the canal space of each image slice were connected to create an imaginary central axis for each canal. The radius of curvature of the tangential circle was measured and inverted as a measure of curvature using custom-made mathematical modeling software. Root canal curvature was greatest in the apical third and least in the middle third for all canals. The greatest curvatures were in the mesiobuccal (MB) canal (0.76 +/- 0.48 mm(-1)) with abrupt curves, and the least curvatures were in the palatal (P) canal (0.38 +/- 0.34 mm(-1)) with a gradual curve. This study has measured the 3D curvature of root canals in maxillary first molars and reinforced the value of microCT with mathematical modeling.

Functional Implications of Ubiquitous Semicircular Canal Non-Orthogonality in Mammals

PubMed Central

Berlin, Jeri C.; Kirk, E. Christopher; Rowe, Timothy B.

2013-01-01

The ‘canonical model’ of semicircular canal orientation in mammals assumes that 1) the three ipsilateral canals of an inner ear exist in orthogonal planes (i.e., orthogonality), 2) corresponding left and right canal pairs have equivalent angles (i.e., angle symmetry), and 3) contralateral synergistic canals occupy parallel planes (i.e., coplanarity). However, descriptions of vestibular anatomy that quantify semicircular canal orientation in single species often diverge substantially from this model. Data for primates further suggest that semicircular canal orthogonality varies predictably with the angular head velocities encountered in locomotion. These observations raise the possibility that orthogonality, symmetry, and coplanarity are misleading descriptors of semicircular canal orientation in mammals, and that deviations from these norms could have significant functional consequences. Here we critically assess the canonical model of semicircular canal orientation using high-resolution X-ray computed tomography scans of 39 mammal species. We find that substantial deviations from orthogonality, angle symmetry, and coplanarity are the rule for the mammals in our comparative sample. Furthermore, the degree to which the semicircular canals of a given species deviate from orthogonality is negatively correlated with estimated vestibular sensitivity. We conclude that the available comparative morphometric data do not support the canonical model and that its overemphasis as a heuristic generalization obscures a large amount of functionally relevant variation in semicircular canal orientation between species. PMID:24260256

26. DETAIL OF HEADGATE HOIST MACHINERY, TWIN FALLS MAIN CANAL. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. DETAIL OF HEADGATE HOIST MACHINERY, TWIN FALLS MAIN CANAL. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

Endodontic management of radix paramolaris with six canals: a clinical case report.

PubMed

Acharya, N; Singh, A; Samant, P S; Gautam, V

2013-01-01

Endodontic therapy of mandibular molars is a challenging task due to its varied root canal morphology. A mandibular first molar with additional buccal root (Radix paramolaris) and additional distolingual root (Radix Entomolaris) is an example of its varied anatomy. A successful management of atypical root canal configurations is an important aspect in determining the success rate of root canal therapy. The detail knowledge of the root morphology and canal anatomy allows the clinician for accurate location of the extra roots and canals and accordingly the refinement of the access cavity for the stress free entry of complex anatomy. Hence, for a successful root canal therapy, clinician must be aware of the external and internal anatomic variations .The aim of this clinical case report is to present and describe the unusual presence of two separate mesial roots and six root canals in mandibular first molar, detected during routine endodontic therapy.

154. Photocopy of transit book (taken from Twin Falls Canal ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

154. Photocopy of transit book (taken from Twin Falls Canal Company Surveyor's Transit Book #405T, Page 2, #46 Division One). STATEMENT OF SIGHT-SETTING FOR 1903 SURVEY TO ALIGN SOUTH SIDE CANAL, TWIN FALLS COUNTY, MILNER, IDAHO. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

28. MAIN CANAL Photographic copy of historic photo, July ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. MAIN CANAL - Photographic copy of historic photo, July 18, 1906 (original print located at the Carlsbad Irrigation District offices, Carlsbad, New Mexico) J.J. Lubken, photographer 'LOOKING SOUTH FROM STATION 413, ON THE MAIN CANAL, SHOWING THE REMODLING SIC OF THE OLD PECOS VALLEY IRRIGATING CANAL' - Carlsbad Irrigation District, Main Canal, 4 miles North to 12 miles Southeast of Carlsbad, Carlsbad, Eddy County, NM

The effect of four different irrigation systems in the removal of a root canal sealer.

PubMed

Grischke, J; Müller-Heine, A; Hülsmann, M

2014-09-01

The aim of this study was to compare the efficiency of sonic, ultrasonic, and hydrodynamic devices in the removal of a root canal sealer from the surface and from simulated irregularities of root canals. Fifty-three root canals with two standardized grooves in the apical and coronal parts of longitudinally split roots were covered with AH Plus root canal sealer. Compared were the effects of (control) syringe irrigation, (1) CanalBrush, (2) passive ultrasonic irrigation, (3) EndoActivator, and (4) RinsEndo on the removal of the sealer. The specimens were divided into four groups (N = 12) and one control group (N = 5) via randomization. The amount of remaining sealer in the root canal irregularities was evaluated under a microscope using a 4-grade scoring system, whereas the remaining sealer on the root canal surface was evaluated with a 7-grade scoring system. Passive ultrasonic irrigation is more effective than the other tested irrigation systems or syringe irrigation in removing sealer from root canal walls (p < 0.01). None of the techniques had a significant effect on cleaning the lateral grooves. Within the limitations of this study protocol ultrasonic irrigation shows a superior effect on sealer removal from the root canal surface during endodontic retreatment. Cleaning of lateral grooves seems not to be possible with one of the techniques investigated. Incomplete removal of root canal sealer during re-treatment may cause treatment failure. Passive Ultrasonic irrigation seems to be the most effective system to remove sealer from a root canal.

Radiographic study of the mandibular retromolar canal: an anatomic structure with clinical importance.

PubMed

von Arx, Thomas; Hänni, Andrea; Sendi, Pedram; Buser, Daniel; Bornstein, Michael M

2011-12-01

The retromolar canal is an anatomic structure of the mandible with clinical importance. This canal branches off from the mandibular canal behind the third molar and travels to the retromolar foramen in the retromolar fossa. The retromolar canal might conduct accessory innervation to the mandibular molars or contain an aberrant buccal nerve. Patients referred for panoramic radiography were consecutively enrolled, provided a limited cone-beam computed tomography (CBCT) scan had also been taken in the area of interest. Radiographs were retrospectively screened for the presence of a retromolar canal, and linear measurements (distance to second molar, height, width) were taken. One hundred twenty-one sides in 100 patients were evaluated (100 unilateral and 21 bilateral cases). A total of 31 retromolar canals were identified with CBCT (25.6%). Only 7 of these canals were also seen on the corresponding panoramic radiographs. The existence of a retromolar canal was not statistically related to gender or side. With regard to the linear measurements, the mean distance from the retromolar canal to the second molar was 15.16 mm (±2.39 mm), the mean height of the canal was 11.34 mm (±2.36 mm), and the mean width was 0.99 mm (±0.31 mm). This radiographic study documents a frequency of 25% for the presence of a retromolar canal. The clinician is advised to preserve this anatomic variation when performing surgery in the retromolar area and to consider additional locoregional anesthesia in the case of failed mandibular block anesthesia. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Simulation of the effects of proposed tide gates on circulation, flushing, and water quality in residential canals, Cape Coral Florida

USGS Publications Warehouse

Goodwin, Carl R.

1991-01-01

Decades of dredging and filling of Florida's low-lying coastal wetlands have produced thousands of miles of residential tidal canals and adjacent waterfront property. Typically, these canals are poorly flushed, and over time, accumulated organic-rich bottom materials, contribute to an increasingly severe degraded water quality. One-dimensional hydrodynamic and constituent-transport models were applied to two dead-end canal systems to determine the effects of canal system interconnection using tide gates on water circulation and constituent flushing. The model simulates existing and possible future circulation and flushing conditions in about 29 miles of the approximately 130 miles of tidally influenced canals in Cape Coral, located on the central west coast of peninsular Florida. Model results indicate that tidal water-level differences between the two canal systems can be converted to kinetic energy, in the form of increased water circulation, but the use of one-way tide gate interconnections. Computations show that construction of from one to four tide gates will cause replacement of a volume of water equivalent to the total volume of canals in both systems in 15 to 9 days, respectively. Because some canals flush faster than others, 47 and 21 percent of the original canal water will remain in both systems 50 days after start of operation of one and four tide gates, respectively. Some of the effects that such increased flushing are expected to have include reduced density stratification and associated dissolved-oxygen depletion in canal bottom waters, increased localized reaeration, and more efficient discharge of stormwater runoff entering the canals.

Clinical, parasitological and immunological features of canal cleaners hyper-exposed to Schistosoma mansoni in the Sudan

PubMed Central

SATTI, M Z; SULAIMAN, S M; HOMEIDA, M M A; YOUNIS, S A; GHALIB, H W

1996-01-01

The present work was a longitudinal study on Schistosoma mansoni infection in occupationally hyperexposed canal cleaners in the Sudan and the influence of therapy on the parasitological and humoral immune parameters. Chronically infected canal cleaners (n = 28) were more resistant to reinfection (Fisher's exact test, P < 0.05) than newly recruited canal cleaners (n = 17). Chronically infected canal cleaners had a significantly higher degree of Symmers' fibrosis (χ2 = 19.1, P < 0.0001), significantly larger portal vein diameter (P < 0.05) and enlarged spleen (χ2 = 4.2, P < 0.05) than recently infected, newly recruited canal cleaners. ELISA was used to detect IgG, IgA and IgM in response to whole worm homogenate (WWH) and cercarial homogenate (CH). Chronically infected canal cleaners had significantly higher IgG to WWH antigen than newly recruited canal cleaners and normally exposed individuals (P < 0.05), while both chronically infected and newly recruited canal cleaners had higher IgG levels to CH antigen than normally exposed individuals (P < 0.05). The newly recruited canal cleaners had a significantly higher IgM level to CH antigen than chronically infected canal cleaners (P < 0.05). The IgG level to WWH antigen increased significantly after treatment in newly recruited canal cleaners and normally exposed individuals (P < 0.05). The IgA level to CH antigen increased significantly after treatment in the chronically infected group (P < 0.05). Comparison of the serological parameters between the different study groups with regards to infection and treatment is discussed. PMID:9099926

[Root canal treatment of mandibular second premolar tooth with taurodontism].

PubMed

Vujasković, Mirjana; Karadzić, Branislav; Miletić, Vesna

2008-01-01

Taurodontism is a morphoanatomical change in the shape of a tooth. An enlarged body of a tooth with smaller than usual roots is a characteristic feature. Internal tooth anatomy correlates with this appearance, which means that a taurodontal tooth has a large pulp chamber and apically positioned furcations. This dental anomaly may be associated with different syndromes and congenital discoders. The case report presents the patient of a rare case of taurodontism in the mandibular second premolar with chronic periodontitis. Endodontic treatment was performed after dental history and clinical examination. Special care is required in all segments of endodontic treatment of a taurodontal tooth from the identification orifice, canal exploration, determining working length, cleaning and shaping and obturation of the root canal. Precurved K-file was used for canal exploration and location of the furcation. One mesial and one distal canal with the buccal position were identified in the apical third of the root canal. The working lengths of two canals were determined by radiographic interpretation with two K-files in each canal and verified with the apex locator. During canal instrumentation, the third canal was located in the disto-lingual position. The working length of the third canal was established using the apex locator. Thorough knowledge of tooth anatomy and its variations can lead to lower percentage of endodontic failure. Each clinical case involving these teeth should be investigated carefully, clinically and radiographically to detect additional root canals. High quality radiographs from different angles and proper instrumentarium improve the quality of endodontic procedure.

Use of cone-beam computed tomography to evaluate root and canal morphology of mandibular first and second molars in Turkish individuals

PubMed Central

Sekerci, Ahmet E.; Dinçer, Asiye N.; Cayabatmaz, Muhammed; Zorba, Yahya O.

2013-01-01

Objective: The aim of this study was to investigate the root and canal morphology of mandibular first and second molars in a Turkish population by using cone beam computed tomography (CBCT). Study design: CBCT images of mandibular first (n = 823) and second molar (n = 925) teeth from 605 Turkish patients were analyzed. The root canal configurations were classified according to the method of Vertucci. Results: The majority of mandibular molars (95.8% of first molars, 85.4% of second molars) had two separate roots; however, three roots were identified in 2.06% of first molars and 3.45% of second molars. C-shaped canals occurred 0.85% of first molars and 4.1% of second molars. Three canals were found in 79.9% of first molars and 72.8% of second molars. Most distal roots had a simple type I configuration, whereas mesial roots had more complex canal systems, with more than one canal. The most common root morphology of first and second molars is the two rooted morphology with three canals. Both the mesial and distal roots showed wide variations in canal anatomy with type IV and type I canal configuration predominating in the mesial and distal roots, respectively. Conclusion: Vertucci type I and IV canal configurations were the most prevalent in the distal and mesial roots, respectively, of both the mandibular first and second permanent molar teeth. Key words:Cone-beam CT, Turkish, mandibular molars, root and canal morphology. PMID:23524421

29. VIEW OF TWIN FALLS MAIN CANAL BRIDGE FROM UPSTREAM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

29. VIEW OF TWIN FALLS MAIN CANAL BRIDGE FROM UPSTREAM LOOKING DOWNSTREAM. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

31. VIEW OF TWIN FALLS MAIN CANAL BRIDGE FROM DOWNSTREAM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

31. VIEW OF TWIN FALLS MAIN CANAL BRIDGE FROM DOWNSTREAM LOOKING UPSTREAM. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

30. VIEW OF TWIN FALLS MAIN CANAL FROM BRIDGE LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

30. VIEW OF TWIN FALLS MAIN CANAL FROM BRIDGE LOOKING WEST DOWNSTREAM. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

24. TWIN FALLS MAIN CANAL HEADWORKS, DOWNSTREAM LOOKING TOWARD THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. TWIN FALLS MAIN CANAL HEADWORKS, DOWNSTREAM LOOKING TOWARD THE EAST. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

Morphometric study of the lumbar spinal canal in the Korean population.

PubMed

Lee, H M; Kim, N H; Kim, H J; Chung, I H

1995-08-01

The anatomic dimensions of the vertebral body and spinal canal of the lumbar spine were analyzed in Koreans. To determine the normal dimension of the lumbar spinal canal in Koreans, to determine whether there are any racial differences in the morphometry of the lumbar spinal canal, and to provide criteria for diagnosing spinal stenosis in the Far Eastern Asian. Some radiologic and anatomic studies have been conducted regarding the size of the lumbar spinal canal of whites and blacks in western and African countries. One-thousand-eight-hundred measurements were performed on the transverse and sagittal diameters of vertebral bodies and spinal canals using complete sets of 90 lumbar vertebrae. The mean mid-sagittal diameter of the lumbar spinal canal in the Korean population was less than that measured in white and African populations, but there was no significant differences between the Korean, white, and African populations regarding the transverse diameter of the lumbar spinal canal. The mid-sagittal diameter of the lumbar spinal canal is narrowest in the Far Eastern Asian population; the radiologic criteria of spinal stenosis should be reconsidered for these people.

[Shaping ability of two nickel-titanium rotary systems in simulated S-shaped canals].

PubMed

Luo, Hong-xia; Huang, Ding-ming; Zhang, Fu-hua; Tan, Hong; Zhou, Xue-dong

2008-01-01

To evaluate the shaping ability of two nickel-titanium rotary systems (ProTaper and Hero642) in simulated S-shaped canals. Thirty simulated S-shaped canals were randomly divided into three groups and prepared by ProTaper, Hero642, ProTaper combined with Hero642 respectively. All the canals were scanned before and after instrumentation, and the amount of material removed in the inner and outer wall and the canal width after instrumentation were measured with a computer image analysis program. There was significant difference in the amount of material removed at the inner side of apical curvature and outer side of apex between ProTaper combined with Hero642 and ProTaper files (P < 0.05) at the same tip size. The inner and outer wall of the canals were evenly prepared by ProTaper combined with Hero642, and the taper of canals were better than those prepared by Hero642. ProTaper combined with Hero 642 had better shaping ability to maintain the original shape and could create good taper canals in the simulated S-shaped canal model.

Endodontic treatment of mandibular molars with atypical root canal anatomy: reports of 4 cases.

PubMed

Chauhan, Raju; Singh, Shweta

2015-01-01

The variations in root canal anatomy of multirooted teeth represent a continuous challenge to endodontic diagnosis and treatment. Although the most common configuration of mandibular molars is one containing 2 roots and 3 root canals, there are many different combinations. Very rarely, an additional third (supernumerary) root is seen. When it is located distolingually to the main distal root, this third root is called radix entomolaris (RE), and when it is located mesiobuccally to the mesial root, it is called radix paramolaris (RP). Variations of root canal systems need not always be in the form of extra roots or extra canals. Single roots with single canals can also occur. A general dentist should be aware of these unusual root canal morphologies in mandibular molars for the success of endodontic treatment. These case reports describe the root canal treatment of a case of RE in the mandibular first molar, 2 rare cases of RP (1 each in the mandibular first and second molars), and a mandibular second molar with a single root and root canal.

Modelling the vestibular head tilt response.

PubMed

Heibert, D; Lithgow, B

2005-03-01

This paper attempts to verify the existence of potentially diagnostically significant periodic signals thought to exist in recordings of neural activity originating from the vestibular nerve, following a single tilt of the head. It then attempts to find the physiological basis of this signal, in particular focusing on the mechanical response of the vestibular system. Simple mechanical models of the semi circular canals having angular velocities applied to them were looked at. A simple single canal model was simulated using CFX software. Finally, a simple model of all three canals with elastic duct walls and a moving cupula was constructed. Pressure waves within the canals were simulated using water hammer or pressure transient theory. In particular, it was investigated whether pressure waves within the utricle following a square pulse angular velocity applied to the canal(s) may be responsible for quasi-periodic oscillatory signals. The simulations showed that there are no pressure waves resonating within the canals following a square pulse angular velocity applied to the canal(s). The results show that the oscillatory signals are most likely not mechanical in origin. It was concluded that further investigation is required.

Maxillary molars with morphologic variations of the palatal root canals: a report of four cases.

PubMed

Holderrieth, Silke; Gernhardt, Christian Ralf

2009-07-01

The purpose of this article was to show the importance of the knowledge of the anatomy of root canals. Unusual root and root canal morphologies associated with both buccal roots of upper molars have been recorded in several studies in the literature. However, scientific information focusing on variations of the palatal root is rare. In this report, four cases are presented involving the root canal treatment of maxillary first and second molars with unusual morphologic configurations of the palatal root canals. During root canal treatment, type IV and V configurations as defined by Vertucci of the palatal canals of two first and two second maxillary molars were identified. After mechanical instrumentation, the canals were obturated. Radiologic and clinical re-evaluation showed no signs of inflammation. This report describes and discusses the possibility of different root and canal variations of the maxillary molars from a clinical point of view. Anatomic variations can occur in any tooth, and palatal roots of maxillary first and second molars are no exception. Therefore, careful examination of radiographs and internal anatomy of teeth is essential.

22. TWIN FALLS MAIN CANAL HEADWORKS WITH MILNER DAM IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. TWIN FALLS MAIN CANAL HEADWORKS WITH MILNER DAM IN DISTANCE; LOOKING EAST. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

23. TWIN FALLS MAIN CANAL HEADWORKS WITH MILNER DAM IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. TWIN FALLS MAIN CANAL HEADWORKS WITH MILNER DAM IN DISTANCE; LOOKING NORTHEAST. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

Nivolumab After Combined Modality Therapy in Treating Patients With High Risk Stage II-IIIB Anal Cancer

ClinicalTrials.gov

2018-06-20

Anal Basaloid Carcinoma; Anal Canal Cloacogenic Carcinoma; Anal Margin Squamous Cell Carcinoma; Stage II Anal Canal Cancer AJCC v6 and v7; Stage IIB Anal Cancer AJCC v8; Stage III Anal Canal Cancer AJCC v6 and v7; Stage IIIA Anal Canal Cancer AJCC v6 and v7; Stage IIIB Anal Canal Cancer AJCC v6 and v7

14. VIEW OF WESTERN CANAL AT THE SALT RIVER PROJECT'S ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. VIEW OF WESTERN CANAL AT THE SALT RIVER PROJECT'S KYRENE STEAM POWER PLANT, TEMPE. THE WESTERN CANAL BEGINS TO TURN NORTH AT THIS POINT, AND DIVERTS WATER TO THE HIGHLINE PUMP PLANT AND THE KYRENE LATERAL. THE KYRENE PLANT INLET (LEFT-CENTER) ALSO DIVERTS CANAL WATER FOR PLANT OPERATION AND COOLING. - Western Canal, South side of Salt River between Tempe, Phoenix & Mesa, Mesa, Maricopa County, AZ

Effect of diode laser and ultrasonics with and without ethylenediaminetetraacetic acid on smear layer removal from the root canals: A scanning electron microscope study.

PubMed

Amin, Khalid; Masoodi, Ajaz; Nabi, Shahnaz; Ahmad, Parvaiz; Farooq, Riyaz; Purra, Aamir Rashid; Ahangar, Fayaz Ahmad

2016-01-01

To evaluate the effect of diode laser and ultrasonics with and without ethylenediaminetetraacetic acid (EDTA) on the smear layer removal from root canals. A total of 120 mandibular premolars were decoronated to working the length of 12 mm and prepared with protaper rotary files up to size F3. Group A canals irrigated with 1 ml of 3% sodium hypochlorite (NaOCl) followed by 3 ml of 3% NaOCl. Group B canals irrigated with 1 ml of 17% EDTA followed by 3 ml of 3% NaOCl. Group C canals lased with a diode laser. Group D canals were initially irrigated with 0.8 ml of 17% EDTA the remaining 0.2 ml was used to fill the root canals, and diode laser application was done. Group E canals were irrigated with 1 ml distilled water with passive ultrasonic activation, followed by 3 ml of 3% NaOCl. Group F canals were irrigated with 1 ml EDTA with passive ultrasonic activation, followed by 3 ml of 3% NaOCl. Scanning electron microscope examination of canals was done for remaining smear layer at coronal middle and apical third levels. Ultrasonics with EDTA had the least smear layer scores. Diode laser alone performed significantly better than ultrasonics.

An in vitro study to find the incidence of mesiobuccal 2 canal in permanent maxillary first molars using three different methods.

PubMed

Vasundhara, V; Lashkari, Krishna Prasada

2017-01-01

In-vitro study was done to evaluate the incidence of MB2 canals using three different methods (CBCT, CLINICAL ANALYSIS AND DENTAL LOUPES) and to compare the efficacy of the three methods in identifying the incidence of MB2 canals in maxillary permanent first molars. The study sample consisted of 120 extracted intact permanent maxillary molars. These extracted teeth were subjected to CBCT. Later the teeth were access opened with naked eye to find the incidence of MB2 canal, and then the teeth were visualised under dental loupe to locate MB2 canal if they were missed under naked eye. Results was statistically analysed by Mc Nemar's tests with Bonferroni correction, Chi square test and Cochran's Q test. CBCT showed high incidence (68.3%) of MB2 canal in maxillary first molars and it showed to be a reliable method in detecting MB2 canal. When compared to dental loupe (52.5%) and naked eye (25%), the dental loupe improved the detection of MB2 canal. Within the parameter of this study in detecting the incidence of MB2 canal, using CBCT dental loupes and naked eye, detection of MB2 canal was significantly higher with CBCT followed by dental loupe and least with naked eye.

Decreased levels of matrix metalloproteinase-2 in root-canal exudates during root canal treatment.

PubMed

Pattamapun, Kassara; Handagoon, Sira; Sastraruji, Thanapat; Gutmann, James L; Pavasant, Prasit; Krisanaprakornkit, Suttichai

2017-10-01

To determine the matrix metalloproteinase-2 (MMP-2) levels in root-canal exudates from teeth undergoing root-canal treatment. The root-canal exudates from six teeth with normal pulp and periradicular tissues that required intentional root canal treatment for prosthodontic reasons and from twelve teeth with pulp necrosis and asymptomatic apical periodontitis (AAP) were sampled with paper points for bacterial culture and aspirated for the detection of proMMP-2 and active MMP-2 by gelatin zymography and the quantification of MMP-2 levels by ELISA. By gelatin zymography, both proMMP-2 and active MMP-2 were detected in the first collection of root-canal exudates from teeth with pulp necrosis and AAP, but not from teeth with normal pulp, and their levels gradually decreased and disappeared at the last collection. Consistently, ELISA demonstrated a significant decrease in MMP-2 levels in the root-canal exudates of teeth with pulp necrosis and AAP following root canal procedures (p<0.05). Furthermore, the MMP-2 levels were significantly lower in the negative bacterial culture than those in the positive bacterial culture (p<0.001). The levels of MMP-2 in root-canal exudates from teeth with pulp necrosis and AAP were gradually reduced during root canal procedures. Future studies are required to determine if MMP-2 levels may be used as a biomolecule for the healing of apical lesions, similar to the clinical application of MMP-8 as a biomarker. Copyright © 2017 Elsevier Ltd. All rights reserved.

Bony pelvic canal size and shape in relation to body proportionality in humans.

PubMed

Kurki, Helen K

2013-05-01

Obstetric selection acts on the female pelvic canal to accommodate the human neonate and contributes to pelvic sexual dimorphism. There is a complex relationship between selection for obstetric sufficiency and for overall body size in humans. The relationship between selective pressures may differ among populations of different body sizes and proportions, as pelvic canal dimensions vary among populations. Size and shape of the pelvic canal in relation to body size and shape were examined using nine skeletal samples (total female n = 57; male n = 84) from diverse geographical regions. Pelvic, vertebral, and lower limb bone measurements were collected. Principal component analyses demonstrate pelvic canal size and shape differences among the samples. Male multivariate variance in pelvic shape is greater than female variance for North and South Africans. High-latitude samples have larger and broader bodies, and pelvic canals of larger size and, among females, relatively broader medio-lateral dimensions relative to low-latitude samples, which tend to display relatively expanded inlet antero-posterior (A-P) and posterior canal dimensions. Differences in canal shape exist among samples that are not associated with latitude or body size, suggesting independence of some canal shape characteristics from body size and shape. The South Africans are distinctive with very narrow bodies and small pelvic inlets relative to an elongated lower canal in A-P and posterior lengths. Variation in pelvic canal geometry among populations is consistent with a high degree of evolvability in the human pelvis. Copyright © 2013 Wiley Periodicals, Inc.

Measurement of the percentage of root filling in oval-shaped canals obturated with Thermafil Obturators and Beefill 2in1: In vitro study

PubMed Central

Collado-Castellanos, Nicolás; Alegre-Domingo, Teresa; Dolz-Solsona, María; Faus-Matoses, Vicente

2015-01-01

Background The aim of the study was to measure the percentage of root canal fillings in long oval canals obturated with thermoplasticized gutta-percha techniques, Beefill 2in1® and Thermafil Obturators®. Material and Methods Fifty four mandibular incisors were selected after bucco-lingual and mesio-distal radiographs showed at 5 mm from apex an internal long:short diameter ≥2. Teeth were instrumented with Protaper Universal and divided in two groups of 27. Group 1 was obturated with Thermafil Obturators® and group 2 with Beefill 2in1®. Two horizontal sections were cut at 5 and 7 mm from the apex and photographed in a stereo-microscope. The total area of the canal and filled canal in cross-sections were measured with AutoCad and the percentages of gutta-percha-sealer and voids in the canal were obtained. Results Both systems achieved high percentage of filled canal, Thermafil 96.8% and Beefill 2in1 98.9%. The percentages of voids in both groups were very low. No significant differences were found between the two groups . The percentage obtained at 5 and 7 mm from the apex in both groups showed no significant difference. Conclusions The percentages of filled canal (gutta-percha-sealer) were high and these two thermoplasticized techniques are suitable for long oval canals obturation. Key words:Long oval canal, oval canal, thermoplasticized obturation. PMID:26155350

Measurement of the percentage of root filling in oval-shaped canals obturated with Thermafil Obturators and Beefill 2in1: In vitro study.

PubMed

Faus-Llácer, Vicente; Collado-Castellanos, Nicolás; Alegre-Domingo, Teresa; Dolz-Solsona, María; Faus-Matoses, Vicente

2015-04-01

The aim of the study was to measure the percentage of root canal fillings in long oval canals obturated with thermoplasticized gutta-percha techniques, Beefill 2in1® and Thermafil Obturators®. Fifty four mandibular incisors were selected after bucco-lingual and mesio-distal radiographs showed at 5 mm from apex an internal long:short diameter ≥2. Teeth were instrumented with Protaper Universal and divided in two groups of 27. Group 1 was obturated with Thermafil Obturators® and group 2 with Beefill 2in1®. Two horizontal sections were cut at 5 and 7 mm from the apex and photographed in a stereo-microscope. The total area of the canal and filled canal in cross-sections were measured with AutoCad and the percentages of gutta-percha-sealer and voids in the canal were obtained. Both systems achieved high percentage of filled canal, Thermafil 96.8% and Beefill 2in1 98.9%. The percentages of voids in both groups were very low. No significant differences were found between the two groups . The percentage obtained at 5 and 7 mm from the apex in both groups showed no significant difference. The percentages of filled canal (gutta-percha-sealer) were high and these two thermoplasticized techniques are suitable for long oval canals obturation. Key words:Long oval canal, oval canal, thermoplasticized obturation.

Deviations of Mesial Root Canals of Mandibular First Molar Teeth at the Apical Third: A Micro-computed Tomographic Study.

PubMed

Keles, Ali; Keskin, Cangül

2018-06-01

The present study aimed to quantitatively analyze apical foramen deviations of mesial root canals of mandibular first molar teeth by means of micro-computed tomographic (micro-CT) imaging. Micro-CT images of the mesial roots of 109 mandibular first molar teeth with independent mesiobuccal (MB) and mesiolingual (ML) root canals were analyzed. The deviations of the apical foramina of the MB, ML, and middle mesial root canals from the anatomic apex were measured. The vertical distance between the apical foramina of each mesial root canal in relation to each other was also calculated. The distances from the apical foramina of the MB, ML, and middle mesial root canals to the anatomic apex of the mesial root were up to 2.51 mm, 3.21 mm, and 5.67 mm, respectively. There was no significant difference between the deviations of MB and ML root canals from each other (P > .05). The middle mesial root canal showed the greatest deviation compared with the MB and ML canals (P < .05). The apical foramina of mesial root canals of mandibular first molar teeth showed greater variations from each other and anatomic apices than previously reported. Clinically, the use of electronic apex locators for the detection of minor apical foramen of each mesial root canal is of the utmost important. Copyright © 2018 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Morphometrics of the Southern Green Stink Bug [Nezara viridula (L.) (Hemiptera: Pentatomidae)] Stylet Bundle.

PubMed

Esquivel, J F; Droleskey, R E; Ward, L A; Harvey, R B

2018-03-29

The southern green stink bug, Nezara viridula (L.) (Hemiptera: Pentatomidae), is a cosmopolitan pest of high-value cash crops, including cotton (Gossypium hirsutum L.; Malvales: Malvaceae). The pest can ingest and transmit disease-causing bacterial and fungal pathogens of cotton. We hypothesized that the size of the food canal may contribute to selective transmission, as observed in previous reports. The objective of this study was to examine food canal size and other morphometric parameters of the southern green stink bug stylet bundle at two locations (labium and head) to improve our understanding of factors that may contribute to pathogen transmission. For the food canal, females possessed significantly larger canals than males, major axes were significantly longer than minor axes, and canal sizes were numerically higher at the labium compared with the head. For salivary canal, mean axes lengths were similar between sexes and the head and labium. For both food and salivary canals, axes lengths were longer and area was larger at the labium compared with the head. These findings indicate the presence of a "funnel effect" with canals becoming narrower proximally. Sex and location significantly affected the size of the intact stylet bundle. Results indicate the food canal size was not a factor affecting previously observed selective passive transmission. Major and minor axes measurements, coupled with morphological observations of canal shapes and observed "funnel effect" in the food and salivary canals, improve our understanding of the hemipteran stylet bundle and its relationship with the insect's internal morphology.

Comparison of preparation of curved root canals with Hyflex CM and Revo-S rotary nickel-titanium instruments.

PubMed

Bürklein, S; Börjes, L; Schäfer, E

2014-05-01

To compare the shaping ability of three different nickel-titanium rotary instruments during the preparation of curved root canals in extracted teeth. A total of 60 root canals with curvatures ranging between 25° and 35° were divided into three groups of 20 canals. Based on radiographs taken prior to instrumentation, the groups were balanced with respect to the angle and the radius of canal curvature. Canals were prepared to a final apical size of 35 using Mtwo, Hyflex CM, and Revo-S. Using pre- and post-instrumentation radiographs, straightening of the canal curvatures was determined with a computer image analysis program. Preparation time, changes of working length and instrument failures were also recorded. These data were analysed statistically using anova and Student-Newman-Keuls test. During preparation, no file fractured. Mtwo and Hyflex CM maintained the original canal curvature significantly better than Revo-S (P < 0.05). Instrumentation with Mtwo and Hyflex CM was significantly faster than with Revo-S and resulted in less loss of working length (P < 0.05), whilst no significant differences were obtained between Mtwo and Hyflex CM (P > 0.05). Under the conditions of this study, Mtwo and Hyflex CM respected the original canal curvature well and were safe to use. The use of Revo-S instruments required more time to prepare the curved canals and resulted in more pronounced canal straightening compared with Mtwo and Hyflex CM. © 2013 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Ex Vivo Comparison of Mtwo and RaCe Rotary File Systems in Root Canal Deviation: One File Only versus the Conventional Method.

PubMed

Aminsobhani, Mohsen; Razmi, Hasan; Nozari, Solmaz

2015-07-01

Cleaning and shaping of the root canal system is an important step in endodontic therapy. New instruments incorporate new preparation techniques that can improve the efficacy of cleaning and shaping. The aim of this study was to compare the efficacy of Mtwo and RaCe rotary file systems in straightening the canal curvature using only one file or the conventional method. Sixty mesial roots of extracted human mandibular molars were prepared by RaCe and Mtwo nickel-titanium (NiTi) rotary files using the conventional and only one rotary file methods. The working length was 18 mm and the curvatures of the root canals were between 15-45°. By superimposing x-ray images before and after the instrumentation, deviation of the canals was assessed using Adobe Photoshop CS3 software. Preparation time was recorded. Data were analyzed using three-way ANOVA and Tukey's post hoc test. There were no significant differences between RaCe and Mtwo or between the two root canal preparation methods in root canal deviation in buccolingual and mesiodistal radiographs (P>0.05). Changes of root canal curvature in >35° subgroups were significantly more than in other subgroups with smaller canal curvatures. Preparation time was shorter in one file only technique. According to the results, the two rotary systems and the two root canal preparation methods had equal efficacy in straightening the canals; but the preparation time was shorter in one file only group.

Identification of possible factors impacting dental students' ability to locate MB2 canals in maxillary molars.

PubMed

Park, Ellen; Chehroudi, Babak; Coil, Jeffrey M

2014-05-01

This study examined the effect of the access size and straight-line path of access on third-year dental students' ability to locate a second mesiobuccal (MB2) canal in maxillary first and second molars. One hundred and six third-year dental students at one Faculty of Dentistry performed simulated root canal treatment with the aid of 2x magnification loupes on extracted teeth. A postgraduate endodontic student subsequently made a reasonable search for an untreated MB2 canal with the aid of a dental operating microscope. The mesiobuccal roots were then sectioned horizontally for determination of the canal configuration. The dental students were able to treat an MB2 canal in 15.8 percent of the teeth, but this was not associated with satisfactory access criteria. The postgraduate endodontic student identified an MB2 canal in 54.7 percent of the remaining tooth samples excluding those where the MB2 canal was found by the dental students; this represented 94.3 percent of those teeth confirmed by horizontal sectioning of the root to have an MB2 canal. The postgraduate student troughed, on average, 2.6 mm before negotiating the MB2 canal. As satisfactory access criteria and straight-line path of access did not correlate with the dental students' ability to find a second mesiobuccal canal, this result has important implications for educational goals with respect to endodontic treatment of maxillary molar teeth.

An original micro-CT study and meta-analysis of the internal and external anatomy of maxillary molars - implications for endodontic treatment.

PubMed

Tomaszewska, Iwona M; Jarzębska, Anna; Skinningsrud, Bendik; Pękala, Przemysław A; Wroński, Sebastian; Iwanaga, Joe

2018-05-07

The aim of this work was to conduct a radiological micro-CT study and meta-analysis to determine the morphological features of the root canal anatomy of the maxillary molars. The radiological study included micro-CT scans of 110 maxillary first molars and 98 maxillary second molars. To identify articles eligible for inclusion in our meta-analysis, PubMed, Embase, and Web of Science were search comprehensively. The following data were extracted: study type (cadaveric, intraoperative or imaging), Vertucci types of canal configuration, presence/number of canals, roots, apical foramina, apical deltas, and inter-canal communications. The mesiobuccal root was the most variable with respect to canal configuration, type I being the most common configuration followed by type II and type IV. Type I was the most common canal configuration in the distobuccal and palatal root. Regarding the number of canals in the maxillary first and second molars, one canal was most prevalent in all roots of the three molars, except for the mesiobuccal root of maxillary first molar, in which two canals were most prevalent. The most prevalent number of roots in all maxillary molars was three. Knowledge of endodontic anatomy determines the parameters of root canal treatment and significantly affects the probability of success. It is therefore especially important to know the morphology of the root canal system in order to perform endodontic treatment correctly. This article is protected by copyright. All rights reserved. © 2018 Wiley Periodicals, Inc.

148. TWIN FALLS MAIN CANAL DIVERSION, TWIN FALLS COUNTY, MILNER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

148. TWIN FALLS MAIN CANAL DIVERSION, TWIN FALLS COUNTY, MILNER DAM; HEADGATES AT INLET, SOUTHWEST VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

98. SHOESTRING, TWIN FALLS MAIN CANAL, TWIN FALLS COUNTY NORTHWEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

98. SHOESTRING, TWIN FALLS MAIN CANAL, TWIN FALLS COUNTY NORTHWEST OF MURTAUGH, IDAHO; PROFILE VIEW, SOUTH. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

16. VIEW OF HIGHLINE CANAL PIPELINE OUTLET, SHOWING THE OUTLET, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. VIEW OF HIGHLINE CANAL PIPELINE OUTLET, SHOWING THE OUTLET, A GROUNDWATER PUMP (LEFT), AND THE SOUTH BRANCH OF THE CANAL (FOREGROUND), August 1989 - Highline Canal & Pumping Station, South side of Salt River between Tempe, Phoenix & Mesa, Tempe, Maricopa County, AZ

2. VIEW SOUTH, GENERAL VIEW SHOWING CANAL, CANAL SPILLWAY ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW SOUTH, GENERAL VIEW SHOWING CANAL, CANAL SPILLWAY ON LEFT, DRAIN GATE GATEHOUSE IN DISTANCE - Norwich Water Power Company, West bank of Shetucket River beginning opposite Second Street & extending .8 mile northward, Greenville section, Norwich, New London County, CT

5. Looking west upstream, towards the location of the erstwhile ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Looking west upstream, towards the location of the erstwhile intake flume into canal from the upper reaches of the Potomac River above the Great Falls, on the old Potowmack Canal built by George Washington. The plan contemplated canal navigation around the Great Falls of the Potomac River, located on the Virginia side of the Potomac, about 15 miles above Washington, D.C. The Company was organized in 1785, and by 1802, this and three or four smaller canals were substantially completed and raft-like boats began operation with materials from the west to the city of Georgetown. 'Although the canals and locks of the Potomac Canal were considered a great engineering accomplishment, the improvements to the river channel were inadequate. Disappointment ... - Potowmack Company: Great Falls Canal & Locks, Great Falls, Fairfax County, VA

Canalolithiasis of the superior semicircular canal: an anomaly in benign paroxysmal vertigo.

PubMed

Schratzenstaller, Bruno; Wagner-Manslau, Carola; Strasser, Gerhard; Arnold, Wolfgang

2005-10-01

According to the canalolithiasis theory, benign paroxysmal vertigo (BPPV) is caused by gravity-dependent movements of otoconial debris that collects in the endolymph of the posterior semicircular canal. Other parts of the vestibular organ are rarely affected, and it is mainly the horizontal canal that is affected by this atypical form of BPPV. Canalolithiasis of the superior semicircular canal must be considered an anomaly because the superior semicircular canal is the highest point of the vestibular organ and debris normally cannot collect in this special location. Until now, BPPV of the superior canal has mainly been dealt with theoretically in the literature. The authors present three patients with canalolithiasis of the superior semicircular canal and offer direct proof of the condition using high-resolution 3D MRI.

Endodontic management of permanent mandibular molars with 6 root canals: report of 3 cases.

PubMed

Malhotra, Amit; Ahlawat, Jyoti; Bansal, Chirag; Tahiliani, Divya

2016-01-01

Aberrations in the internal dental anatomy present challenges for clinicians performing endodontic therapy. These challenges have been partly resolved in recent years by a more comprehensive knowledge of root canal anatomy as well as advancements in the endodontic armamentarium. The aim of this case series is to describe successful root canal treatment, under magnification, in 3 cases of mandibular first molars with 6 root canals. Two of these teeth had 2 roots (mesial and distal) with 3 canals in each root; the third tooth had 3 root canals located mesially and 3 present distally as well as a radix entomolaris. A distal root with 3 canals is rare; however, it is important to look for such anatomical variations to ensure successful endodontic therapy.

Middle mesial canal of the permanent mandibular first molars: an anatomical challenge directly related to the outcome of endodontic treatment.

PubMed

Perlea, Paula; Nistor, Cristina Coralia; Imre, Marina; Gheorghiu, Irina Maria; Iliescu, Alexandru Andrei

2017-01-01

To effectively clean and shape the mandibular permanent first molars it is mandatory to understand in detail their complex internal anatomy. The middle mesial canal is an additional canal located between the usual mesiobuccal and mesiolingual canals in the mesial root of mandibular first molars. The incidence of the middle mesial canal, its relationship with main canals of the mesial root and the possibility for it to be negotiated is an important practical issue in endodontics. To identify the presence of this canal is mandatory. Accordingly, a modified endodontic access, the use of the operating microscope and periapical radiographs in two different horizontal projections are indicated to enhance the long-term favorable outcome of the endodontic treatment.

Temporal and Spatial Variation of Chemical Water Quality in a Contour Canal.

NASA Astrophysics Data System (ADS)

Swanson, L. A.; Lunn, R. J.

2004-12-01

Chemical water quality is a highly variable aspect of any water body. Historically numerous researchers have investigated the chemical variability of rivers, streams and wetlands, artificial water bodies such as canals have been largely neglected. Canals are typically hydraulically characterised by low flows and a lack of mixing processes. This can potentially lead to significant spatial variability in water chemistry, and as a result many canals in the UK regularly fail water quality targets at specific locations. Recent changes to UK legislation, following the European Water Framework Directive (2000/60/EC), have resulted in canals being subject to achieving `good ecological status'. In the case of canals, what constitutes `good ecological status' is largely unknown and little expertise is available since historically canal management has not been driven by chemical and ecological quality targets. Consequently, there is an urgent need for new research to determine the main factors influencing canal water quality and their ecological status. This research presents results from a study based on a UK contour canal, the Union Canal in central Scotland. The Union Canal typically demonstrates spatially and temporally variable levels of dissolved oxygen (DO) and orthophosphate (PO4-P): simultaneously, seasonal and diel fluctuations of DO and PO4-P are pronounced at a small number of locations. During 1995, minimum levels of DO along the canal length ranged from 9mgl-1 in Edinburgh to as low as 2mgl-1 approximately 20kms away, this then rose again to 8mgl-1 after a further distance of 2km. These acutely low levels of DO are coupled with events of excessive PO4-P up to 0.235mgl-1:10 times greater than those normally found in rivers, causing localised eutrophication and extensive fish kills. To determine the cause of the `hot spots' of poor water quality found on the Union Canal, simultaneous investigations of the hydraulic regime, spatial and temporal water quality variation and the canal's biological status were carried out. Velocity metering in the canal identified extremely low flow rates ~0.15m3s-1. A tracer testing procedure for the canal's low flow conditions was designed and implemented which identified a lack of rapid dispersion processes with D~0.133m3s-1. Water quality sampling consisted of a year-long programme of high frequency temporal and spatial sampling along the canal length. Observations demonstrate significant variability, with widely differing measurements of DO as little as 5m apart. In addition, spot samples of water quality taken from individual incoming field drains showed PO4-P concentrations up to 2mgl-1, with a predominance of nutrient bound clay and silt sediments that ultimately settle on the canal bed. Due to low dispersion rates, residence times for pollutants are long and field drains, in combination with navigational activity, may well be one of the primary causes of raised nutrient levels at some locations. This research has shown that canal water quality is highly spatially and temporally variable; far in excess of the variability normally found in river systems. This is mainly determined by a lack of hydraulic mixing and the presence of small quantities of incoming runoff water of very low quality. Whilst low in volume, incoming sediment from the drains appears to strongly influence the nearby canal water quality. These results have important consequences both for future monitoring strategies of canals and management of their gradual ecological improvement.

Comparison among manual instruments and PathFile and Mtwo rotary instruments to create a glide path in the root canal preparation of curved canals.

PubMed

Alves, Vanessa de Oliveira; Bueno, Carlos Eduardo da Silveira; Cunha, Rodrigo Sanches; Pinheiro, Sérgio Luiz; Fontana, Carlos Eduardo; de Martin, Alexandre Sigrist

2012-01-01

Nickel-titanium rotary instruments reduce procedural errors and the time required to finish root canal preparation. The goal of this study was to evaluate the occurrences of apical transportation and canal aberrations produced with different instruments used to create a glide path in the preparation of curved root canals, namely manual K-files (Dentsply Maillefer, Ballaigues, Switzerland) and PathFile (Dentsply Maillefer) and Mtwo (Sweden and Martina, Padua, Italy) nickel-titanium rotary files. The mesial canals of 45 mandibular first and second molars (with curvature angles between 25° and 35°) were selected for this study. The specimens were divided randomly into 3 groups with 15 canals each, and canal preparation was performed by an endodontist using #10-15-20 K-type stainless steel manual files (group M), #13-16-19 PathFile rotary instruments (group PF), and #10-15-20 Mtwo rotary instruments (group MT). The double digital radiograph technique was used, pre- and postinstrumentation, to assess whether apical transportation and/or aberration in root canal morphology occurred. The initial and final images of the central axis of the canals were compared by superimposition through computerized analysis and with the aid of magnification. The specimens were analyzed by 3 evaluators, whose calibration was checked using the Kendall agreement test. No apical transportation or aberration in root canal morphology occurred in any of the teeth; therefore, no statistical analysis was conducted. Neither the manual instruments nor the PathFile or Mtwo rotary instruments used to create a glide path had any influence on the occurrence of apical transportation or produced any canal aberration. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Micro-computed tomographic analysis of the root canal morphology of the distal root of mandibular first molar.

PubMed

Filpo-Perez, Carolina; Bramante, Clovis Monteiro; Villas-Boas, Marcelo Haas; Húngaro Duarte, Marco Antonio; Versiani, Marco Aurélio; Ordinola-Zapata, Ronald

2015-02-01

The aim of this study was to evaluate the morphologic aspects of the root canal anatomy of the distal root of a mandibular first molar using micro-computed tomographic analysis. One-hundred distal roots of mandibular first molars were scanned using a micro-computed tomographic device at an isotropic resolution of 19.6 μm. The percentage frequency distribution of the morphologic configuration of the root canal was performed according to the Vertucci classification system. Two-dimensional parameters (area, perimeter, roundness, aspect ratio, and major and minor diameters) and the cross-sectional shape of the root canal were analyzed in the apical third at every 1-mm interval from the main apical foramen in roots presenting Vertucci types I and II configurations (n = 79). Data were statistically compared using the Kruskal-Wallis and Dunn tests with a significance level set at 5%. Seventy-six percent of the distal roots had a single root canal. Two, three, and four canals were found in 13%, 8%, and 3% of the sample, respectively. In 13 specimens, the configuration of the root canal did not fit into Vertucci's classification. Overall, 2-dimensional parameter values significantly increased at the 3-mm level (P < .05). The prevalence of oval canals was higher at the 1-mm level and decreased at the 5-mm level in which long oval and flattened canals were more prevalent. The distal roots of the mandibular first molars showed a high prevalence of single root canals. The prevalence of long oval and flattened canals increased in the coronal direction. In 13% of the samples, canal configurations that were not included in Vertucci's configuration system were found. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Endodontic shaping performance using nickel-titanium hand and motor ProTaper systems by novice dental students.

PubMed

Tu, Ming-Gene; Chen, San-Yue; Huang, Heng-Li; Tsai, Chi-Cheng

2008-05-01

Preparing a continuous tapering conical shape and maintaining the original shape of a canal are obligatory in root canal preparation. The purpose of this study was to compare the shaping performance in simulated curved canal resin blocks of the same novice dental students using hand-prepared and engine-driven nickel-titanium (NiTi) rotary ProTaper instruments in an endodontic laboratory class. Twenty-three fourth-year dental students attending China Medical University Dental School prepared 46 simulated curved canals in resin blocks with two types of NiTi rotary systems: hand and motor ProTaper files. Composite images were prepared for estimation. Material removed, canal width and canal deviation were measured at five levels in the apical 4 mm of the simulated curved canals using AutoCAD 2004 software. Data were analyzed using Wilcoxon's rank-sum test. The hand ProTaper group cut significantly wider than the motor rotary ProTaper group in the outer wall, except for the apical 0 mm point. The total canal width was cut significantly larger in the hand group than in the motor group. There was no significant difference between the two groups in centering canal shape, except at the 3 mm level. These findings show that the novice students prepared the simulated curved canal that deviated more outwardly from apical 1 mm to 4 mm using the hand ProTaper. The ability to maintain the original curvature was better in the motor rotary ProTaper group than in the hand ProTaper group. Undergraduate students, if following the preparation sequence carefully, could successfully perform canal shaping by motor ProTaper files and achieve better root canal geometry than by using hand ProTaper files within the same teaching and practicing sessions.

Comparison of canal transportation and centering ability of rotary protaper, one shape system and wave one system using cone beam computed tomography: An in vitro study

PubMed Central

Tambe, Varsha Harshal; Nagmode, Pradnya Sunil; Abraham, Sathish; Patait, Mahendra; Lahoti, Pratik Vinod; Jaju, Neha

2014-01-01

Aim: The aim of the present study was to compare the canal transportation and centering ability of Rotary ProTaper, One Shape and Wave One systems using cone beam computed tomography (CBCT) in curved root canals to find better instrumentation technique for maintaining root canal geometry. Materials and Methods: Total 30 freshly extracted premolars having curved root canals with at least 10 degrees of curvature were divided into three groups of 10 teeth each. All teeth were scanned by CBCT to determine the root canal shape before instrumentation. In Group 1, the canals were prepared with Rotary ProTaper files, in Group 2 the canals were prepared with One Shape files and in Group 3 canals were prepared with Wave One files. After preparation, post-instrumentation scan was performed. Pre-instrumentation and post-instrumentation images were obtained at three levels, 3 mm apical, 3 mm coronal and 8 mm apical above the apical foramen were compared using CBCT software. Amount of transportation and centering ability were assessed. The three groups were statistically compared with analysis of variance and Tukey honestly significant. Results: All instruments maintained the original canal curvature with significant differences between the different files. Data suggested that Wave One files presented the best outcomes for both the variables evaluated. Wave One files caused lesser transportation and remained better centered in the canal than One Shape and Rotary ProTaper files. Conclusion: The canal preparation with Wave One files showed lesser transportation and better centering ability than One Shape and ProTaper. PMID:25506145

Morphology of mandibular first molars analyzed by cone-beam computed tomography in a Korean population: variations in the number of roots and canals.

PubMed

Kim, Sin-Young; Kim, Bom Sahn; Woo, Jein; Kim, Yemi

2013-12-01

The aim of this study was to determine the root and canal morphology of the mandibular first molars in a Korean population of Mongolian origin by retrospective analysis of a large number of cone-beam computed tomography (CBCT) images. A total of 976 subjects with bilateral mandibular first molars were examined by using in vivo CBCT methods. The number and configuration of roots, the number of root canals, and the canal configuration based on Vertucci's classification were determined. Overall, 25.82% of examined molars had 3 roots, 73.51% had 2 roots, and 0.67% had 1 root. The incidence of fourth canal was 50.36%. A right-sided predominance was noted for extra distal roots (P < .001), whereas a left-sided predominance was observed for extra distal canals (P < .001). No significant sex-related differences were shown for their prevalence. The bilateral prevalence rate was 69.13% for extra distal roots and 78.08% for extra distolingual (DL) canals. In the mesial roots, type IV canal was the most frequent (76.86% for 2-rooted molars and 72.96% for 3-rooted molars). In the distal roots, type l was the most common (66.62% for 2-rooted molars and 99.40%-100% for 3-rooted molars). The incidence of 2 canals in distobuccal roots, first reported in this study, was 0.15%. Among mandibular first molars, there is a high prevalence of a separate DL root and/or a separate DL canal, and such molars commonly have 4 canals in the Korean population. CBCT is a useful tool for determining root and canal morphology. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Exploiting the potential of free software to evaluate root canal biomechanical preparation outcomes through micro-CT images.

PubMed

Neves, A A; Silva, E J; Roter, J M; Belladona, F G; Alves, H D; Lopes, R T; Paciornik, S; De-Deus, G A

2015-11-01

To propose an automated image processing routine based on free software to quantify root canal preparation outcomes in pairs of sound and instrumented roots after micro-CT scanning procedures. Seven mesial roots of human mandibular molars with different canal configuration systems were studied: (i) Vertucci's type 1, (ii) Vertucci's type 2, (iii) two individual canals, (iv) Vertucci's type 6, canals (v) with and (vi) without debris, and (vii) canal with visible pulp calcification. All teeth were instrumented with the BioRaCe system and scanned in a Skyscan 1173 micro-CT before and after canal preparation. After reconstruction, the instrumented stack of images (IS) was registered against the preoperative sound stack of images (SS). Image processing included contrast equalization and noise filtering. Sound canal volumes were obtained by a minimum threshold. For the IS, a fixed conservative threshold was chosen as the best compromise between instrumented canal and dentine whilst avoiding debris, resulting in instrumented canal plus empty spaces. Arithmetic and logical operations between sound and instrumented stacks were used to identify debris. Noninstrumented dentine was calculated using a minimum threshold in the IS and subtracting from the SS and total debris. Removed dentine volume was obtained by subtracting SS from IS. Quantitative data on total debris present in the root canal space after instrumentation, noninstrumented areas and removed dentine volume were obtained for each test case, as well as three-dimensional volume renderings. After standardization of acquisition, reconstruction and image processing micro-CT images, a quantitative approach for calculation of root canal biomechanical outcomes was achieved using free software. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

6. View southwest, culvert inlet with canal bank completely removed. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. View southwest, culvert inlet with canal bank completely removed. Left to right: back of headwall; tops of high inlet barrels; vertical transition wall between high inlet barrels and low, interior, inlet barrels; tops of low interior barrels; vertical heartening planks and low cutoff wall along former edge of canal bank; dewatered canal bed. - Delaware & Raritan Canal, Ten Mile Run Culvert, 1.5 miles South of Blackwells Road, East Millstone, Somerset County, NJ

Endodontic management of contralateral mandibular first molars with six root canals

PubMed Central

Bhargav, Kambhampati; Sirisha, Kantheti; Jyothi, Mandava; Boddeda, Mohan Rao

2017-01-01

The knowledge of variations in root canal morphology is essential for a successful endodontic outcome. Contralateral mandibular molar with six root canals is a rare entity. Root canal treatment of mandibular molars with aberrant canal configuration can be diagnostically and technically challenging. While dealing with variant mandibular molars, mishaps may happen. This case report describes variations in contralateral mandibular molars and also an endodontic mishap while managing them. PMID:29259369

Anatomic study on mental canal and incisive nerve canal in interforaminal region in Chinese population.

PubMed

Xu, Yun; Suo, Ning; Tian, Xiufen; Li, Fei; Zhong, Guangxin; Liu, Xiaoran; Bao, Yongxing; Song, Tao; Tian, Hua

2015-08-01

This study was aimed to detect the positions of mental canal and incisive nerve canal as well as the prolongation of mandibular canal in interforaminal region in Chinese population to supply the reference data of the surgical safe zone in chin for clinicians. A total of 80 formalin-fixed semi-mandibles of Chinese adult cadavers were dissected, the positions and courses of mental canal and incisive nerve canal as well as the prolongation of mandibular canal in interforaminal region were measured. The mental foramina were present in all cases (100 %), and most of them were located below 2nd premolar (58.75 %). Accessory mental foramina were observed in 5 %. The anterior end of mandibular canal, extending along the course of 7.37 ± 1.10 mm above the lower border of mandible to interforaminal region about 3.54 ± 0.70 mm medial to the mental foramen, most often ended below between the two premolars (73.75 %), where it continued as the incisive nerve canal (100 %) and the mental canal (96.25 %). Mental canal, with the wall formed by compact bone, being 2.60 ± 0.60 mm in diameter and 4.01 ± 1.20 mm in length, opened into mental foramen. Incisive nerve canal, with the wall formed by thin compact bone and/or partly or completely by spongy bone, being 1.76 ± 0.27 mm in diameter and 24.87 ± 2.23 mm in length, extended to the incisor region along the course of 9.53 ± 1.43 mm above the lower border of mandible, and most often ended below the lateral incisor (70.00 %). This research recommended for chin operations in Chinese population: the surgical safe zone could be set in the region about over 4 mm anterior to the mental foramen, and over 12 mm above inferior border of mandible for anterior alveolar surgery, or within 9 mm above inferior border of mandible for genioplasty.

A reconstructed computerized tomographic comparison of Ni-Ti rotary GT files versus traditional instruments in canals shaped by novice operators.

PubMed

Gluskin, A H; Brown, D C; Buchanan, L S

2001-09-01

The aim of this study was to compare the effects of preparation with conventional stainless steel Flexofiles and Gates Glidden burs versus nickel-titanium GT rotary files in the shaping of mesial root canals of extracted mandibular molars. A total of 54 canals from 27 mesial roots of mandibular molar teeth were prepared using one of two methods by novice dental students. One canal in each root was prepared by a crown-down approach. utilizing stainless steel Flexofiles and Gates Glidden burs. The other canal was prepared using nickel-titanium GT rotary files in a crown-down fashion as recommended by the manufacturer. Preoperative CT scans of each root were recorded and 50 canal specimens were available for postoperative comparisons. Following canal shaping, postoperative scans were superimposed on the original images. Changes in canal area, canal transportation and thickness of remaining root structure at strategic levels of the root were analyzed. The time taken for each method was also noted. At the coronal and mid-root coronal one-third sections, the rotary GT files produced a significantly smaller postoperative canal area (P < 0.05). In the mid-root sections there was significantly less transportation of the root canal toward the furcation, and less thinning of the root structure with GT files compared to the stainless steel files (P < 0.05). Overall, there was greater conservation of structure coronally and more adequate shape in the mid-root level. The GT rotary technique was significantly faster than the stainless steel hand-held file technique (P < 0.0001). Two GT instruments fractured during the study. Under the conditions of this study, novice dental students were able to prepare curved root canals with Ni-Ti GT rotary files with less transportation and greater conservation of tooth structure, compared to canals prepared with hand instruments. The rotary technique was significantly faster.

[In vitro comparison of root canal preparation with step-back technique and GT rotary file--a nickel-titanium engine driven rotary instrument system].

PubMed

Krajczár, Károly; Tóth, Vilmos; Nyárády, Zoltán; Szabó, Gyula

2005-06-01

The aim of the authors' study was to compare the remaining root canal wall thickness and the preparation time of root canals, prepared either with step-back technique, or with GT Rotary File, an engine driven nickel-titanium rotary instrument system. Twenty extracted molars were decoronated. Teeth were divided in two groups. In Group 1 root canals were prepared with step-back technique. In Group 2 GT Rotary File System was utilized. Preoperative vestibulo-oral X-ray pictures were taken from all teeth with radiovisiograph (RVG). The final preparations at the mesiobuccal canals (MB) were performed with size #30 and palatinal/distal canals with size #40 instruments. Postoperative RVG pictures were taken ensuring the preoperative positioning. The working time was measured in seconds during each preparation. The authors also assessed the remaining root canal wall thickness at 3, 6 and 9 mm from the radiological apex, comparing the width of the canal walls of the vestibulo-oral projections on pre- and postoperative RVG pictures both mesially and buccally. The ratios of the residual and preoperative root canal wall thickness were calculated and compared. The largest difference was found at the MB canals of the coronal and middle third level of the root, measured on the distal canal wall. The ratio of the remaining dentin wall thickness at the coronal and the middle level in the case of step-back preparation was 0.605 and 0.754, and 0.824 and 0.895 in the cases of GT files respectively. The preparation time needed for GT Rotary File System was altogether 68.7% (MB) and 52.5% (D/P canals) of corresponding step-back preparation times. The use of GT Rotary File with comparison of standard step-back method resulted in a shortened preparation time and excessive damage of the coronal part of the root canal could be avoided.

Prevalence and morphometric analysis of three-rooted mandibular first molars in a Brazilian subpopulation

PubMed Central

Rodrigues, Clarissa Teles; de Oliveira-Santos, Christiano; Bernardineli, Norberti; Duarte, Marco Antonio Hungaro; Bramante, Clovis Monteiro; Minotti-Bonfante, Paloma Gagliardi; Ordinola-Zapata, Ronald

2016-01-01

ABSTRACT The knowledge of the internal anatomy of three-rooted mandibular molars may help clinicians to diagnose and plan the root canal treatment in order to provide adequate therapy when this variation is present. Objectives: To determine the prevalence of three-rooted mandibular molars in a Brazilian population using cone beam computed tomography (CBCT) and to analyze the anatomy of mandibular first molars with three roots through micro-CT. Material and Methods: CBCT images of 116 patients were reviewed to determine the prevalence of three-rooted first mandibular molars in a Brazilian subpopulation. Furthermore, with the use of micro-CT, 55 extracted three-rooted mandibular first molars were scanned and reconstructed to assess root length, distance between canal orifices, apical diameter, Vertucci's classification, presence of apical delta, number of foramina and furcations, lateral and accessory canals. The distance between the orifice on the pulp chamber floor and the beginning of the curvature and the angle of canal curvature were analyzed in the distolingual root. Data were compared using the Kruskal-Wallis test (α=0.05). Results: The prevalence of three-rooted mandibular first molars was of 2.58%. Mesial roots showed complex distribution of the root canal system in comparison to the distal roots. The median of major diameters of mesiobuccal, mesiolingual and single mesial canals were: 0.34, 0.41 and 0.60 mm, respectively. The higher values of major diameters were found in the distobuccal canals (0.56 mm) and the lower diameters in the distolingual canals (0.29 mm). The lowest orifice distance was found between the mesial canals (MB-ML) and the highest distance between the distal root canals (DB-DL). Almost all distal roots had one root canal and one apical foramen with few accessory canals. Conclusions: Distolingual root generally has short length, severe curvature and a single root canal with low apical diameter. PMID:27812625

The ability of Reciproc instruments to reach full working length without glide path preparation: a clinical retrospective study.

PubMed

Bartols, Andreas; Robra, Bernt-Peter; Walther, Winfried

2017-01-01

Reciproc instruments are the only contemporary root canal instruments where glide path preparation is no longer strictly demanded by the manufacturer. As the complete preparation of root canals is associated with success in endodontic treatment we wanted to assess the ability and find predictors for Reciproc instruments to reach full working length (RFWL) in root canals of maxillary molars in primary root canal treatment (1°RCTx) and retreatment (2°RCTx) cases. This retrospective study evaluated 255 endodontic treatment cases of maxillary molars. 180 were 1°RCTx and 75 2°RCTx. All root canals were prepared with Reciproc instruments. The groups were compared and in a binary logistic regression model predictors for RFWL were evaluated. A total of 926 root canals were treated with Reciproc without glide path preparation. This was possible in 885 canals (95.6%). In 1°RCTx cases 625 of 649 (96.3%) canals were RFWL and in 2°RCTx cases 260 of 277 (93.9%). In second and third mesiobuccal canals (MB2/3) 90 out of 101 (89.1%) were RFWL with Reciproc in 1°RCTx and in the 2°RCTx treatment group 49 out of 51 cases (96.1%). In mesio-buccal (MB1) canals "2°RCTx" was identified as negative predictor for RFWL (OR 0.24 (CI [0.08-0.77])). In MB2/3 canals full working length was reached less often (OR 0.04 (CI [0.01-0.31])) if the tooth was constricted and more often if MB2/3 and MB1 canals were convergent (OR 4.60 (CI [1.07-19.61])). Using Reciproc instruments, the vast majority of root canals in primary treatment and retreatment cases can be prepared without glide path preparation.

109. CEDAR DRAW SPILL, LOW LINE CANAL, TWIN FALLS COUNTY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

109. CEDAR DRAW SPILL, LOW LINE CANAL, TWIN FALLS COUNTY, SOUTH OF FILER, IDAHO; OVERALL VIEW LOOKING WEST. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

95. CEDAR DRAW SPILL, LOW LINE CANAL, TWIN FALLS COUNTY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

95. CEDAR DRAW SPILL, LOW LINE CANAL, TWIN FALLS COUNTY SOUTH OF FILER, IDAHO; OVERALL VIEW LOOKING EAST. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

110. ROCK CREEK SIPHON, LOW LINE CANAL, TWIN FALLS COUNTY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

110. ROCK CREEK SIPHON, LOW LINE CANAL, TWIN FALLS COUNTY, SOUTH OF KIMBERLY, IDAHO; INLET SIDE WEST VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

90. CEDAR DRAW SPILL, HIGH LINE CANAL, TWIN FALLS COUNTY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

90. CEDAR DRAW SPILL, HIGH LINE CANAL, TWIN FALLS COUNTY, SOUTH OF FILER, IDAHO; CLOSE-UP OF GATES. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

112. ROCK CREEK SIPHON LOW LINE CANAL, TWIN FALLS COUNTY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

112. ROCK CREEK SIPHON LOW LINE CANAL, TWIN FALLS COUNTY, SOUTH OF KIMBERLY IDAHO; OUTLET SIDE, EAST VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

93. ROCK CREEK SIPHON, LOW LINE CANAL, TWIN FALLS COUNTY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

93. ROCK CREEK SIPHON, LOW LINE CANAL, TWIN FALLS COUNTY SOUTH OF KIMBERLY, IDAHO; OVERALL NORTHEAST VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

147. TWIN FALLS MAIN CANAL DIVERSION, TWIN FALLS COUNTY, MILNER, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

147. TWIN FALLS MAIN CANAL DIVERSION, TWIN FALLS COUNTY, MILNER, IDAHO; VIEW OF MAIN HEADGATES, EAST VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

124. MCMULLEN CREEK HIGH LINE CANAL, TWIN FALLS COUNTY, SOUTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

124. MCMULLEN CREEK HIGH LINE CANAL, TWIN FALLS COUNTY, SOUTH OF KIMBERLY, IDAHO; OVERALL SOUTH VIEW OF DRAW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

188. Photocopy of drawing, Twin Falls Canal Company, date unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

188. Photocopy of drawing, Twin Falls Canal Company, date unknown. DETAILS OF GATE RAISING MECHANISM, NO COUNTY; BLUEPRINT. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

3D Computer aided treatment planning in endodontics.

PubMed

van der Meer, Wicher J; Vissink, Arjan; Ng, Yuan Ling; Gulabivala, Kishor

2016-02-01

Obliteration of the root canal system due to accelerated dentinogenesis and dystrophic calcification can challenge the achievement of root canal treatment goals. This paper describes the application of 3D digital mapping technology for predictable navigation of obliterated canal systems during root canal treatment to avoid iatrogenic damage of the root. Digital endodontic treatment planning for anterior teeth with severely obliterated root canal systems was accomplished with the aid of computer software, based on cone beam computer tomography (CBCT) scans and intra-oral scans of the dentition. On the basis of these scans, endodontic guides were created for the planned treatment through digital designing and rapid prototyping fabrication. The custom-made guides allowed for an uncomplicated and predictable canal location and management. The method of digital designing and rapid prototyping of endodontic guides allows for reliable and predictable location of root canals of teeth with calcifically metamorphosed root canal systems. The endodontic directional guide facilitates difficult endodontic treatments at little additional cost. Copyright © 2016. Published by Elsevier Ltd.

Shaping ability of nickel-titanium rotary instruments in curved root canals.

PubMed

Talati, Ali; Moradi, Saeed; Forghani, Maryam; Monajemzadeh, Ali

2013-01-01

Disinfection and subsequent obturation of the root canal space require adequate mechanical enlargement of the canals. The purpose of this in vitro study was to compare the shaping ability of Mtwo, RaCe and Medin rotary instruments during the preparation of curved root canals. Sixty mesiobuccal root canals of mandibular molars with severe curvatures between 25-35(°) and radius of 4-9 mm were randomly divided into three groups of 20 canals each. Using pre- and post-instrumentation radiographs, straightening of the canal and the apical transportation were determined with AutoCAD software. The data were analyzed using Chi square, analysis of variance, and post-hoc tests and the significance level was set at P<0.05. Mtwo instruments maintained the canal curvature significantly better than Race and Medin instruments (P<0.05). There was significant difference between the rotary instruments for iatrogenic transportation of the major foramen (P>0.05). Under the conditions of this in vitro study, Mtwo instruments seemed superior to the two other rotary instruments.

Study of mastoid canals and grooves in north karnataka human skulls.

PubMed

Hadimani, Gavishiddappa Andanappa; Bagoji, Ishwar Basavantappa

2013-08-01

This study was undertaken to observe the frequency of mastoid canals and grooves in north Karnataka dry human skulls. 100 dry human skulls of unknown age and sex from the department of Anatomy were selected and observed for the present study. The mastoid regions of dry skulls were observed for the presence of mastoid canals and grooves, if any. A metallic wire was passed through the canal for its confirmation and then the length was measured. The Mastoid canals were present in 53% of the total 100 skulls observed either bilaterally or unilaterally. Mastoid grooves were present in 18% of the total skulls (100) observed. Double mastoid canal was found in 01% of total skull studied and both Mastoid canals & Mastoid grooves together were present in 02% of the total skulls (100) observed. The knowledge of mastoid canals and grooves is very important for otolaryngologists and neurosurgeons. Because they contain an arterial branch of occipital artery with its accompanying vein which is liable to injury resulting into severe bleeding.

Microbial profile of root canals of primary teeth with pulp necrosis and periradicular lesion.

PubMed

Triches, Thaisa Cezária; de Figueiredo, Luciene Cristina; Feres, Magda; de Freitas, Sérgio Fernando Torres; Zimmermann, Gláucia Santos; Cordeiro, Mabel Mariela Rodríguez

2014-01-01

The purpose of this study was to assess the microbial content of root canals of human primary teeth with pulp necrosis and periradicular lesion. Microbial samples were collected from 24 canals of children treated at a pediatric dentistry clinic. Microbiological identification was performed using checker-board DNA-DNA hybridization for 40 different bacteria. Data were analyzed per canal based on the mean count and frequency of each bacterial species. Detectable levels of bacterial species were observed for 35 probes (88%). The most frequent bacteria were Fusobacterium nucleatum sp. nucleatum, Fusobacterium periodonticum, Prevotella melaninogenica, Prevotella nigrescens, and Prevotella intermedia. Facultative species were identified in 20 root canals (83%), anaerobic species were identified in 24 root canals (100%), and aerobic species in 18 root canals (75%). Black-pigmented bacilli were found in 23 samples (96%). The number of different bacterial species detected per canal ranged from five to 33. Endodontic infection in primary teeth with pulp necrosis and periradicular lesion is multimicrobial, including aerobic, facultative, and anaerobic micro-organisms.

Anthropometry of external auditory canal by non-contactable measurement.

PubMed

Yu, Jen-Fang; Lee, Kun-Che; Wang, Ren-Hung; Chen, Yen-Sheng; Fan, Chun-Chieh; Peng, Ying-Chin; Tu, Tsung-Hsien; Chen, Ching-I; Lin, Kuei-Yi

2015-09-01

Human ear canals cannot be measured directly with existing general measurement tools. Furthermore, general non-contact optical methods can only conduct simple peripheral measurements of the auricle and cannot obtain the internal ear canal shape-related measurement data. Therefore, this study uses the computed tomography (CT) technology to measure the geometric shape of the ear canal and the shape of the ear canal using a non-invasive method, and to complete the anthropometry of external auditory canal. The results of the study show that the average height and width of ear canal openings, and the average depth of the first bend for men are generally longer, wider and deeper than those for women. In addition, the difference between the height and width of the ear canal opening is about 40% (p < 0.05). Hence, the circular cross-section shape of the earplugs should be replaced with an elliptical cross-section shape during manufacturing for better fitting. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Root canal morphology and variations in mandibular second molar teeth of an Indian population: an in vivo cone-beam computed tomography analysis.

PubMed

Pawar, Ajinkya Mansing; Pawar, Mansing; Kfir, Anda; Singh, Shishir; Salve, Prashant; Thakur, Bhagyashree; Neelakantan, Prasanna

2017-12-01

This study aims to investigate the root canal morphology of permanent mandibular second molars of an Indian population in vivo using cone-beam computed tomography (CBCT) images. CBCT images (n = 983; males = 489, females = 494) of untreated, completely developed permanent mandibular second molar teeth were examined. CBCT scans were acquired as part of diagnosis and treatment planning for treatments unrelated to the present study. The number of roots and root canals were recorded. Canal configuration was classified based on Vertucci's and Fan's classifications. The most common configuration was two-root (79.35%) and three-root canals (53.50%). The incidence of three-rooted molars was 7.53%, whereas 13.12% of the studied teeth studied have fused roots with C-shaped canals. The predominant canal morphology in the mesial roots was Vertucci's type IV (45.17%), followed by type II (32.55%), type I (7.23%), type V (1.02%), and type III (0.91%). The distal root in contrast showed type I (61.14%) as the predominant canal configuration, followed by type II (18.21%) and type IV (7.53%). The incidence of three-rooted molars was higher in males (n = 55; 5.59%) than in females (n = 19; 1.94%) (p < 0.01). The canals in the extra roots exhibited type I (100%) root canal morphology. In teeth with C-shaped root canal (13.12%), the variations in the coronal, middle, and apical third ranged from C1 to C4. Root canal systems of the mesial roots of mandibular second molars of the study population demonstrated a high degree of variability. While three roots were rare, there was a sexual predisposition. Fused roots with C-shaped canals were rare and demonstrated significant variations from the coronal to apical third. Root canal morphology can demonstrate variations based on race and sex of patients. Clinicians must always consider the possible variations to ensure successful endodontic treatment.

Endodontic photodynamic therapy ex vivo.

PubMed

Ng, Raymond; Singh, Fiza; Papamanou, Despina A; Song, Xiaoqing; Patel, Chitrang; Holewa, Colleen; Patel, Niraj; Klepac-Ceraj, Vanja; Fontana, Carla R; Kent, Ralph; Pagonis, Tom C; Stashenko, Philip P; Soukos, Nikolaos S

2011-02-01

The objective of this study was to evaluate the antimicrobial effects of photodynamic therapy (PDT) on infected human teeth ex vivo. Fifty-two freshly extracted teeth with pulpal necrosis and associated periradicular radiolucencies were obtained from 34 subjects. Twenty-six teeth with 49 canals received chemomechanical debridement (CMD) with 6% NaOCl, and 26 teeth with 52 canals received CMD plus PDT. For PDT, root canal systems were incubated with methylene blue (MB) at concentration of 50 μg/mL for 5 minutes, followed by exposure to red light at 665 nm with an energy fluence of 30 J/cm(2). The contents of root canals were sampled by flushing the canals at baseline and after CMD alone or CMD+PDT and were serially diluted and cultured on blood agar. Survival fractions were calculated by counting colony-forming units (CFUs). Partial characterization of root canal species at baseline and after CMD alone or CMD+PDT was performed by using DNA probes to a panel of 39 endodontic species in the checkerboard assay. The Mantel-Haenszel χ(2) test for treatment effects demonstrated the better performance of CMD+PDT over CMD (P = .026). CMD+PDT significantly reduced the frequency of positive canals relative to CMD alone (P = .0003). After CMD+PDT, 45 of 52 canals (86.5%) had no CFUs as compared with 24 of 49 canals (49%) treated with CMD (canal flush samples). The CFU reductions were similar when teeth or canals were treated as independent entities. Post-treatment detection levels for all species were markedly lower for canals treated by CMD+PDT than they were for those treated by CMD alone. Bacterial species within dentinal tubules were detected in 17 of 22 (77.3%) and 15 of 29 (51.7%) canals in the CMD and CMD+PDT groups, respectively (P = .034). Data indicate that PDT significantly reduces residual bacteria within the root canal system, and that PDT, if further enhanced by technical improvements, holds substantial promise as an adjunct to CMD. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Earth Observations taken by the Expedition 18 Crew

NASA Image and Video Library

2009-01-31

ISS018-E-024949 (31 Jan. 2009) --- The All-American Canal, the largest irrigation canal in the world and a key landmark along the California-Mexico border, is featured in this image photographed by an Expedition 18 crewmember on the International Space Station. This image captures about 15 kilometers of the important infrastructure corridor just west of Yuma, AZ. The prominent dark line crossing the image is the Canal which is crossed, in this view, by Interstate Highway 8. The canal carries 740.6 cubic meters (26,155 cubic feet) of water per second from the Colorado River westward to support the intensive agriculture of California?s Imperial Valley to the northwest, and to nine cities including San Diego, CA. The canal system is the Imperial Valley?s only source of water, and allows irrigation of more than 2,000 square kilometers (500,000 acres) of agricultural fields. The Coachella Canal, one of four main branch canals, leads water north to Imperial Valley. This section of the canal requires constant maintenance. Approximately 68,000 acre-feet of water per year are lost by seepage from the All-American Canal - especially where the canal crosses the great Algodones Dune Field, a portion of which is visible extending from top to bottom in the center of the image. Additionally, dune sand is constantly blown to the southeast, and into the canal. As part of California?s Colorado River Water Use Plan, 37 kilometers (23 miles) of the canal is being lined to prevent water loss by seepage. A recently opened sector parallels the old canal (right) and new lined sectors are under construction (bright lines, center). Engineers have sited new sections of the canal to avoid the worst areas of dune-sand invasion, so that the new configuration will be significantly cheaper to maintain and operate. A new road crosses the dunes and marks the US?Mexico border as part of border fence construction efforts. The margin of the Colorado River floodplain in Mexico is just visible two kilometers south of the border (lower left corner). This floodplain is Mexico?s equivalent of the Imperial Valley in terms of its enormous irrigated agricultural production.

Novel navigation technique for the endodontic treatment of a molar with pulp canal calcification and apical pathology.

PubMed

Shi, Xilin; Zhao, Shiyong; Wang, Weidong; Jiang, Qianzhou; Yang, Xuechao

2018-04-01

Apical periodontitis, the inflammation of periapical tissue, commonly requires root canal treatment to achieve apical healing. However, if it is accompanied by pulp canal calcification, the treatment becomes complicated, and locating the root canal can be challenging. This case report describes a novel approach for treating a molar with pulp canal calcification and apical pathology. Due to the risk of perforation during treatment, a digitally printed template was used to assist in accurately locating the root canal. After six months, the patient was asymptomatic and the periradicular radiolucency was gradually reducing in size. © 2017 Australian Society of Endodontology Inc.

Unusual Root Canal Irrigation Solutions.

PubMed

Mohammadi, Zahed; Jafarzadeh, Hamid; Shalavi, Sousan; Kinoshita, Jun-Ichiro

2017-05-01

Microorganisms and their by-products play a critical role in pulp and periradicular pathosis. Therefore, one of the main purposes of root canal treatment is disinfection of the entire system of the canal. This aim may be obtained using mechanical preparation, chemical irrigation, and temporary medication of the canal. For this purpose, various irrigation solutions have been advocated. Common root canal irrigants, such as sodium hypochlorite, chlorhexidine, and a mixture of tetracycline, acid, and detergent have been extensively reviewed. The aim of this review was to address the less common newer root canal irrigation solutions, such as citric acid, maleic acid, electrochemically activated water, green tea, ozonated water, and SmearClear.

Bilateral presence of two root canals in maxillary central incisors: A rare case study.

PubMed

Kavitha, M; Gokul, Kannan; Ramaprabha, B; Lakshmi, Amudha

2014-04-01

Success in root canal treatment is achieved after thorough cleaning and shaping followed by complete obturation of the canal system. Therefore, endodontic therapy requires specific and complete knowledge of the internal and external dental anatomy, and its variations in presentation. The internal anatomy of the maxillary central incisor is well-known and usually presents one root canal system. This case report describes an endodontic treatment of traumatized both maxillary central incisors with two canal systems. Knowledge of dental anatomy is fundamental for proper endodontic practice. When root canal treatment is performed, the clinician should be aware that both external and internal anatomy may be abnormal.

Maxillary First Molars with 2 Distobuccal Canals: A Case Series.

PubMed

Fogel, Howard M; Cunha, Rodrigo Sanches

2017-11-01

An appreciation of the anatomic complexity of the root canal system is essential at every step of endodontic treatment. Endodontic treatment of teeth with unusual root canal anatomy presents a unique challenge. Eight patients underwent nonsurgical root canal treatment of 3-rooted maxillary first molars in a specialty endodontic private practice. Four cases of Weine type II and 4 cases of Weine type III canal configurations in the distobuccal root of maxillary first molars were presented.This article highlighted an uncommon anatomic variation of 2 canals in the distobuccal root of the maxillary first molar. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Root and canal morphology of mandibular third molars in an Iranian population.

PubMed

Kuzekanani, Maryam; Haghani, Jahangir; Nosrati, Hossein

2012-01-01

A through knowledge of the root canal morphology is required for successful endodontic ther-apy. The aim of this study was to investigate the root and canal morphology of mandibular third molars in Kerman, a prov-ince in southeast of Iran. One-hundred-fifty extracted mandibular third molars were collected randomly from different dental clinics in Kerman. The root canal anatomy and morphology of each tooth was carefully studied using a clearing tech-nique. Root number and morphology, number of canals per root, root canal configuration according to Vertucci classifica-tion, and incidence of dilacerated roots and C-shaped canals in mandibular third molars were evaluated under stereomicro-scope with ×2 to ×3 magnifications. From the total of 150 mandibular third molars studied, 21% had one root. The majority of teeth (73%) had two roots. 5.5% of the teeth had three roots. The incidence of C-shaped canal was 3.5% in this study and 8% of the teeth had at least one dilacerated root. Although root canal anatomy and morphology of mandibular third molars is very variable having two roots seems to be the normal anatomy for these teeth.

Eye size and visual acuity influence vestibular anatomy in mammals.

PubMed

Kemp, Addison D; Christopher Kirk, E

2014-04-01

The semicircular canals of the inner ear detect head rotations and trigger compensatory movements that stabilize gaze and help maintain visual fixation. Mammals with large eyes and high visual acuity require precise gaze stabilization mechanisms because they experience diminished visual functionality at low thresholds of uncompensated motion. Because semicircular canal radius of curvature is a primary determinant of canal sensitivity, species with large canal radii are expected to be capable of more precise gaze stabilization than species with small canal radii. Here, we examine the relationship between mean semicircular canal radius of curvature, eye size, and visual acuity in a large sample of mammals. Our results demonstrate that eye size and visual acuity both explain a significant proportion of the variance in mean canal radius of curvature after statistically controlling for the effects of body mass and phylogeny. These findings suggest that variation in mean semicircular canal radius of curvature among mammals is partly the result of selection for improved gaze stabilization in species with large eyes and acute vision. Our results also provide a possible functional explanation for the small semicircular canal radii of fossorial mammals and plesiadapiforms. Copyright © 2014 Wiley Periodicals, Inc.

Definition and endodontic treatment of dilacerated canals: a survey of Diplomates of the American Board of Endodontics.

PubMed

Dastmalchi, Nafiseh; Kazemi, Zeinab; Hashemi, Siroos; Peters, Ove A; Jafarzadeh, Hamid

2011-01-01

To gather data from Diplomates of the American Board of Endodontics regarding treatment of dilacerated canals. A questionnaire addressing definition, endodontic treatment procedures and prognosis was constructed and distributed via e-mail to 708 Diplomates of the American Board of Endodontics. Data from 150 respondents, a 21% response rate, were collected by using a Web-based interface. For statistical analysis, Chi-square tests were used. More than 25% of respondents believed that a dilacerated root should have a curvature > 40°. One-visit treatment is the best therapeutic approach and transportation is the most likely complication in preparation of these canals. A crown-down technique, watch-winding motion and a master apical file # 25 are the best choices for preparation of these canals. Any warm obturation technique is preferred over lateral compaction by most respondents. A crown-down technique for root canal preparation and a thermoplastic obturation technique are recommended for canals whose curvature is more than 40°. The prognosis of the treatment of these canals is judged not lower than normal canals. Crown-down technique and thermoplastic obturation are recommended for dilacerated canals.

Evaluation of the root and canal morphology of mandibular permanent molars in a south-eastern Turkish population using cone-beam computed tomography

PubMed Central

Nur, Bilge Gulsum; Ok, Evren; Altunsoy, Mustafa; Aglarci, Osman Sami; Colak, Mehmet; Gungor, Enes

2014-01-01

Objective: The aim of this retrospective study was to determine the root and canal morphology of the mandibular first and second permanent molars in a Turkish population using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images of mandibular first (n = 966) and second molar (n = 1165) teeth from 850 Turkish patients were evaluated. The root canal configurations were classified according to the method of Vertucci. The data were analyzed by Pearson's Chi-square test. Results: The majority of mandibular molars were two rooted with three canals; however, three roots were identified in 0.05% of the first molars and 0.01% of the second molars, and 100% of the additional root canals were of type I configuration. Mesial roots had more complex canal systems with more than one canal, whereas most distal roots had a type I configuration. Conclusions: Within the limitations of this study, it can be concluded that CBCT scanning provides supplemental information about the root canal configurations of mandibular molars in a Turkish population. This study may help clinicians in the root canal treatment of mandibular molars. PMID:24966763

Effect of finishing instrumentation using NiTi hand files on volume, surface area and uninstrumented surfaces in C-shaped root canal systems.

PubMed

Amoroso-Silva, P; Alcalde, M P; Hungaro Duarte, M A; De-Deus, G; Ordinola-Zapata, R; Freire, L G; Cavenago, B C; De Moraes, I G

2017-06-01

To assess the effect of 90°-oscillatory instrumentation with hand files on several morphological parameters (volume, surface area and uninstrumented surface) in C-shaped root canals after instrumentation using a single-file reciprocation system (Reciproc; VDW, Munich, Germany) and a Self-Adjusting File System (SAF; ReDent Nova, Ra'anana, Israel). Twenty mandibular second molars with C-shaped canals and C1 canal configurations were divided into two groups (n = 10) and instrumented with Reciproc and SAF instruments. A size 30 NiTi hand K-file attached to a 90°-oscillatory motion handpiece was used as final instrumentation in both groups. The specimens were scanned using micro-computed tomography after all procedures. Volume, surface area increase and uninstrumented root canal surface were analysed using CTAn software (Bruker-microCT, Kontich, Belgium). Also, the uninstrumented root canal surface was calculated for each canal third. All values were compared between groups using the Mann-Whitney test and within groups using the Wilcoxon's signed-rank test. Instrumentation with Reciproc significantly increased canal volume compared with instrumentation with SAF. Additionally, the canal volumes were significantly increased after 90°-oscillatory instrumentation (between and within group comparison; (P < 0.05)). Regarding the increase in surface area after all instrumentation protocols, statistical analysis only revealed significant differences in the within groups comparison (P < 0.05). Reciproc and SAF instrumentation yielded an uninstrumented root canal surface of 28% and 34%, respectively, which was not significantly different (P > 0.05). Final oscillatory instrumentation significantly reduced the uninstrumented root canal surface from 28% to 9% (Reciproc) and from 34% to 15% (SAF; P < 0.05). The apical and middle thirds exhibited larger uninstrumented root canal surfaces after the first instrumentation that was significantly reduced after oscillatory instrumentation (P < 0.05). The Reciproc and SAF system were associated with similar morphological parameters after instrumentation of mandibular second molars with C-shaped canals except for a higher canal volume increase in the Reciproc group compared to the SAF. Furthermore, the final use of 90°-oscillatory instrumentation using NiTi hand files significantly decreased the uninstrumented canal walls that remained after Reciproc and SAF instrumentation. © 2016 International Endodontic Journal. Published by John Wiley & Sons Ltd.

193. Photocopy of Photograph, Twin Falls Canal Company, date unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

193. Photocopy of Photograph, Twin Falls Canal Company, date unknown. MILNER DAM PROFILE, TWIN FALLS COUNTY, MILNER, IDAHO; BLUEPRINT. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

186. Photocopy of drawing, Twin Falls Canal Company, date unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

186. Photocopy of drawing, Twin Falls Canal Company, date unknown. DRY CREEK RESERVOIR, CASSIA COUNTY (NOW TWIN FALLS COUNTY); MAP. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

114. ROCK CREEK SIPHON LOW LINE CANAL, TWIN FALLS COUNTY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

114. ROCK CREEK SIPHON LOW LINE CANAL, TWIN FALLS COUNTY, SOUTH OF KIMBERLY IDAHO; OVERALL VIEW, WEST OF INLET SIDE. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

111. ROCK CREEK SIPHON LOW LINE CANAL, TWIN FALLS COUNTY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

111. ROCK CREEK SIPHON LOW LINE CANAL, TWIN FALLS COUNTY, SOUTH OF KIMBERLY IDAHO; OVERALL VIEW OF SIPHON, EAST VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

191. Photocopy of drawing, Twin Falls Canal Company, date unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

191. Photocopy of drawing, Twin Falls Canal Company, date unknown. SPILLWAY GATES, MILNER DAM, TWIN FALLS COUNTY, MILNER, IDAHO; BLUEPRINT. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

181. Photocopy of Photograph, Twin Falls Canal Company. Photographer and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

181. Photocopy of Photograph, Twin Falls Canal Company. Photographer and date unknown. POINT SPILL, TWIN FALLS COUNTY; SOUTH VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

197. Photocopy of drawing, Twin Falls, Canal Company, date unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

197. Photocopy of drawing, Twin Falls, Canal Company, date unknown. GATE STEMS AND LIFTING DEVICES, NO COUNTY; BLUEPRINT SKETCHES. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

47. FEEDER CANAL AT WILL'S BASIN. BOATS IN THE FOREGROUND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

47. FEEDER CANAL AT WILL'S BASIN. BOATS IN THE FOREGROUND SHOW THE CONTRAST BETWEEN A FULLY LOADED CANAL BOAT (LEFT) AND AN EMPTY ONE (RIGHT). D, L & W RAILROAD'S DOUBLE INTERSECTION PRATT TRUSS BRIDGE IS VISIBLE IN BACKGROUND. - Morris Canal, Phillipsburg, Warren County, NJ

70. GENERAL VIEW OF CANAL IN DOVER LOOKING EAST. WHAT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

70. GENERAL VIEW OF CANAL IN DOVER LOOKING EAST. WHAT APPEARS TO BE A SWING BRIDGE IS VISIBLE ACROSS CANAL ON RIGHT SIDE OF PHOTOGRAPH (NOTE THAT THIS MAY ALSO BE A LIFT BRIDGE WITH THE LIFT EQUIPMENT REMOVED). - Morris Canal, Phillipsburg, Warren County, NJ

Evolution of canals system linking the Vistula, Dnieper and Neman basins

NASA Astrophysics Data System (ADS)

Brykala, Dariusz; Badziai, Vitali

2014-05-01

The aim of this study is to reconstruct landscape changes in the Polesie Region - one of the largest European swampy areas (Belarus), as a result of the creation and operation of a network of canals. From the 16th century efforts were undertaken to connect the Polish areas located in the drainage basins of the Black Sea and Baltic Sea with canals. Already in 1631 the Polish Sejm (parliament) approved the project to build a canal linking the River Berezina (Dnieper basin) with the River Neris (Neman basin). However, the complicated political and economic situation of the country did not allow doing this. Only in the second half of the 18th c. hetman Ogiński financed the construction of a canal linking the Dnieper and Neman basins. The canal connecting the River Szczara (Neman basin) with the River Jasiołda (Pripyat basin) was named after its creator - the Ogiński Canal. At the same time the construction of the Królewski (Royal) Canal linking the River Muchavets (Vistula basin) and the River Pina (Pripyat basin) was under way. The construction of the canal was completed in 1783. The winding channels of the Pina and Muchavets were straightened, and the numerous canals feeding the waterway system drained vast area of marshes and wetlands of the Polesia Region. The last element that connects the catchments of the Vistula and Neman is the Augustów Canal built in the years 1825-1839 (linking the catchments of the Biebrza and Neman). Numerous changes in political boundaries in the watershed area between the Black Sea and the Baltic Sea drainage basins caused the destruction of the hydraulic structures. All the analysed canals were completely destroyed during the two world wars. In the last 200 years the amount and type of locks and weirs has changed. For example, there were no weirs on the Royal Canal in the late 18th c., in the middle of the 19th c. there were 22 such structures, while now that number has gone down to 10. All canals were created for economic reasons, i.e. of the need for floating of timber and food. Currently, in most cases they are tourist attractions only. Only the Królewski Canal, known as the Dnieper-Bug Canal, plays a very important transportation role in the economy of Belarus. These studies are a contribution to the Virtual Institute of Integrated Climate and Landscape Evolution Analysis (ICLEA) and intergovernmental agreement on scientific cooperation between Poland and Belarus in years 2011-2013: No. 13.

Importance of third mesial canals in mandibular molars: report of 2 cases.

PubMed

Yesilsoy, Cemil; Porras, Omar; Gordon, Wanda

2009-07-01

Most mandibular first molars have 2 mesial canals. Two cases of failed endodontically treated first mandibular molars are presented with 2 obturated mesial canals. The cases were retreated with a third mesial canal identified, and instrumented and obturated with resolution of the patients' signs and symptoms. These cases show that consideration must be made to recognize the possibility of a third mesial canal and perform complete treatment to minimize the possibility of failure.

Love Canal: environmental and toxicological studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, C.S.

The New York State Department of Health has been involved at the Love Canal since 1978. The State has carried out numerous environmental and toxicological studies. The major purposes for these studies were to define how Love Canal contaminants might be escaping into the environment at large, what paths contaminant migration might take, and what toxicological effects Love Canal chemicals might have individually and together. Although underground contaminant migration was hypothesized along swales and underground utility bedding, these mechanisms have been proven not to be operative except for some migration along the utility bedding under Frontier Avenue. In general nomore » underground migration has occurred outside the confines of the three city blocks that contain the Love Canal referred to as the ''first ring''. Studies have been confused by apparent burial of waste materials in areas proximate but not directly connected to the Love Canal. Migration of Love Canal leachate has occurred through storm sewers. Love Canal contaminants have reached creeks to the north and the Niagara River to the south through storm sewer transport. In spite of finding 2, 3, 7, 8 tetrachlorodibenzoparadioxin (TCDD), toxicological studies in situ and through exposure to volatile components in Love Canal soils do not indicate unusual toxicity. Animal studies continue in an attempt to determine the teratogenic and fetotoxic potential of Love Canal chemicals under different routes of exposure.« less

Management of Acquired Atresia of the External Auditory Canal.

PubMed

Bajin, Münir Demir; Yılmaz, Taner; Günaydın, Rıza Önder; Kuşçu, Oğuz; Sözen, Tevfik; Jafarov, Shamkal

2015-08-01

The aim was to evaluate surgical techniques and their relationship to postoperative success rate and hearing outcomes in acquired atresia of the external auditory canal. In this article, 24 patients with acquired atresia of the external auditory canal were retrospectively evaluated regarding their canal status, hearing, and postoperative success. Acquired stenosis occurs more commonly in males with a male: female ratio of 2-3:1; it seems to be a disorder affecting young adults. Previous ear surgery (13 patients, 54.2%) and external ear trauma (11 patients, 45.8%) were the main etiological factors of acquired ear canal stenosis. Mastoidectomy (12/13) and traffic accidents (8/11) comprise the majority of these etiological factors. Endaural incision is performed in 79.2% and postauricular incision for 20.8% of cases during the operation. As types of surgical approach, transcanal (70.8%), transmastoid (20.8%), and combined (8.4%) approaches are chosen. The atretic plate is generally located at the bony-cartilaginous junction (37.5%) and in the cartilaginous canal (33.3%); the bony canal is involved in a few cases only. Preserved healthy canal skin, split- or full-thickness skin grafts, or pre- or postauricular skin flaps are used to line the ear canal, but preserved healthy canal skin is preferred. The results of surgery are generally satisfactory, and complications are few if surgical principles are followed.

An Approach for a Mathematical Description of Human Root Canals by Means of Elementary Parameters.

PubMed

Dannemann, Martin; Kucher, Michael; Kirsch, Jasmin; Binkowski, Alexander; Modler, Niels; Hannig, Christian; Weber, Marie-Theres

2017-04-01

Root canal geometry is an important factor for instrumentation and preparation of the canals. Curvature, length, shape, and ramifications need to be evaluated in advance to enhance the success of the treatment. Therefore, the present study aimed to design and realize a method for analyzing the geometric characteristics of human root canals. Two extracted human lower molars were radiographed in the occlusal direction using micro-computed tomographic imaging. The 3-dimensional geometry of the root canals, calculated by a self-implemented image evaluation algorithm, was described by 3 different mathematical models: the elliptical model, the 1-circle model, and the 3-circle model. The different applied mathematical models obtained similar geometric properties depending on the parametric model used. Considering more complex root canals, the differences of the results increase because of the different adaptability and the better approximation of the geometry. With the presented approach, it is possible to estimate and compare the geometry of natural root canals. Therefore, the deviation of the canal can be assessed, which is important for the choice of taper of root canal instruments. Root canals with a nearly elliptical cross section are reasonably approximated by the elliptical model, whereas the 3-circle model obtains a good agreement for curved shapes. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Hypoglossal canal size and hominid speech

PubMed Central

DeGusta, David; Gilbert, W. Henry; Turner, Scott P.

1999-01-01

The mammalian hypoglossal canal transmits the nerve that supplies the motor innervation to the tongue. Hypoglossal canal size has previously been used to date the origin of human-like speech capabilities to at least 400,000 years ago and to assign modern human vocal abilities to Neandertals. These conclusions are based on the hypothesis that the size of the hypoglossal canal is indicative of speech capabilities. This hypothesis is falsified here by the finding of numerous nonhuman primate taxa that have hypoglossal canals in the modern human size range, both absolutely and relative to oral cavity volume. Specimens of Australopithecus afarensis, Australopithecus africanus, and Australopithecus boisei also have hypoglossal canals that, both absolutely and relative to oral cavity volume, are equal in size to those of modern humans. The basis for the hypothesis that hypoglossal canal size is indicative of speech was the assumption that hypoglossal canal size is correlated with hypoglossal nerve size, which in turn is related to tongue function. This assumption is probably incorrect, as we found no apparent correlation between the size of the hypoglossal nerve, or the number of axons it contains, and the size of the hypoglossal canal in a sample of cadavers. Our data demonstrate that the size of the hypoglossal canal does not reflect vocal capabilities or language usage. Thus the date of origin for human language and the speech capabilities of Neandertals remain open questions. PMID:9990105

Mandibular incisive canal: cone beam computed tomography.

PubMed

Pires, Carlos A; Bissada, Nabil F; Becker, Jeffery J; Kanawati, Ali; Landers, Michael A

2012-03-01

Panoramic radiography is often used to analyze the anatomical structure of the teeth, jaws, and temporomandibular joints. Cone beam computed tomography (CBCT) imaging allows multiple axial slices of the image to be obtained through these anatomical structures. The aim of this study was to assess CBCT compared with panoramic radiography to verify the presence, location, and dimensions of the mandibular incisive canal. CBCT scan images and panoramic radiographs of 89 subjects were compared for the presence of the mandibular incisive canal, its location, size, and anterior-posterior length. The distance between the incisive canal and the buccal and lingual plate of the alveolar bone, and the distance from the canal to the inferior border of the mandible and the tooth apex were also measured. A paired t-test was used to calculate any significant difference between the two imaging techniques. Eighty-three percent of the CBCT scans showed the presence of the incisive canal, as did 11% of the panoramic radiographs. The range of the incisive canal diameter, as seen in the CBCT scans, was from 0.4 × 0.4 mm to 4.6 × 3.2 mm. The mean length of the canal was 7 ± 3.8 mm. The distance from the inferior border of the mandible to the canal was 10.2 ± 2.4 mm, and the mean distance to the buccal plate was 2.4 mm. The apex-canal distance (in dentate subjects) was 5.3 mm. The presence, location, and dimensions of the mandibular incisive canal are better determined by CBCT imaging than by panoramic radiography. © 2009 Wiley Periodicals, Inc.

Influence of root canal instrumentation and obturation techniques on intra-operative pain during endodontic therapy

PubMed Central

Martín-González, Jenifer; Echevarría-Pérez, Marta; Sánchez-Domínguez, Benito; Tarilonte-Delgado, Maria L.; Castellanos-Cosano, Lizett; López-Frías, Francisco J.

2012-01-01

Objective: To analyse the influence of root canal instrumentation and obturation techniques on intra-operative pain experienced by patients during endodontic therapy. Method and Materials: A descriptive cross-sectional study was carried out in Ponferrada and Sevilla, Spain, including 80 patients (46 men and 34 women), with ages ranged from 10 to 74 years, randomly recruited. Patient gender and age, affected tooth, pulpal diagnosis, periapical status, previous NSAID or antibiotic (AB) treatment, and root canal instrumentation and obturation techniques were recorded. After root canal treatment (RCT), patients completed a 10-cm visual analogue scale (VAS) that ranked the level of pain. Results were analysed statistically using the Chi-square and ANOVA tests and logistic regression analysis. Results: The mean pain level during root canal treatment was 2.9 ± 3.0 (median = 2) in a VAS between 0 and 10. Forty percent of patients experienced no pain. Gender, age, arch, previous NSAIDs or AB treatment and anaesthetic type did not influence significantly the pain level (p > 0.05). Pain during root canal treatment was significantly greater in molar teeth (OR = 10.1; 95% C.I. = 1.6 - 63.5; p = 0.013). Root canal instrumentation and obturation techniques did not affect significantly patient’s pain during root canal treatment (p > 0.05). Conclusion: Patients feel more pain when RCT is carried out on molar teeth. The root canal instrumentation and obturation techniques do not affect significantly the patients’ pain during RCT. Key words:Anaesthesia, endodontic pain, pulpitis, root canal instrumentation, root canal obturation, rotary files. PMID:22549694

Effect of canal length and curvature on working length alteration with WaveOne reciprocating files.

PubMed

Berutti, Elio; Chiandussi, Giorgio; Paolino, Davide Salvatore; Scotti, Nicola; Cantatore, Giuseppe; Castellucci, Arnaldo; Pasqualini, Damiano

2011-12-01

This study evaluated the working length (WL) modification after instrumentation with WaveOne Primary (Dentsply Maillefer, Ballaigues, Switzerland) reciprocating files and the incidence of overinstrumentation in relation to the initial WL. Thirty-two root canals of permanent teeth were used. The angles of curvature of the canals were calculated on digital radiographs. The initial WL with K-files was transferred to the matched WaveOne Primary reciprocating files. After glide paths were established with PathFile (Dentsply Maillefer, Ballaigues, Switzerland), canals were shaped with WaveOne Primary referring to the initial WL. The difference between the postinstrumentation canal length and the initial canal length was analyzed by using a fiberoptic inspection microscope. Data were analyzed with a balanced 2-way factorial analysis of variance (P < .05). Referring to the initial WL, 24 of 32 WaveOne Primary files projected beyond the experimental apical foramen (minimum-maximum, 0.14-0.76 mm). A significant decrease in the canal length after instrumentation (95% confidence interval ranging from -0.34 mm to -0.26 mm) was detected. The canal curvature significantly influenced the WL variation (F(1) = 30.65, P < .001). The interaction between the initial canal length and the canal curvature was statistically significant (F(2) = 4.38, P = .014). Checking the WL before preparation of the apical third of the root canal is recommended when using the new WaveOne NiTi single-file system. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Analysis and evaluation of relative positions of mandibular third molar and mandibular canal impacts

PubMed Central

Kim, Hang-Gul

2014-01-01

Objectives This study used cone-beam computed tomography (CBCT) images to categorize the relationships between the mandibular canal and the roots and investigated the prevalence of nerve damage. Materials and Methods Through CBCT images, contact and three-dimensional positional relationships between the roots of the mandibular third molar and the mandibular canal were investigated. With this data, prevalence of nerve damage according to the presence of contact and three-dimensional positional relationships was studied. Other factors that affected the prevalence of nerve damage were also investigated. Results When the mandibular third molar and the mandibular canal were shown to have direct contact in CBCT images, the prevalence of nerve damage was higher than in other cases. Also, in cases where the mandibular canal was horizontally lingual to the mandibular third molar and the mandibular canal was vertically at the cervical level of the mandibular third molar, the prevalence of nerve damage was higher than in opposite cases. The percentage of mandibular canal contact with the roots of the mandibular third molar was higher when the mandibular canal was horizontally lingual to the mandibular third molar. Finally, the prevalence of nerve damage was higher when the diameter of the mandibular canal lumen suddenly decreased at the contact area between the mandibular canal and the roots, as shown in CBCT images. Conclusion The three-dimensional relationship of the mandibular third molar and the mandibular canal can help predict nerve damage and can guide patient expectations of the possibility and extent of nerve damage. PMID:25551092

Ex Vivo Comparison of Mtwo and RaCe Rotary File Systems in Root Canal Deviation: One File Only versus the Conventional Method

PubMed Central

Aminsobhani, Mohsen; Nozari, Solmaz

2015-01-01

Objectives: Cleaning and shaping of the root canal system is an important step in endodontic therapy. New instruments incorporate new preparation techniques that can improve the efficacy of cleaning and shaping. The aim of this study was to compare the efficacy of Mtwo and RaCe rotary file systems in straightening the canal curvature using only one file or the conventional method. Materials and Methods: Sixty mesial roots of extracted human mandibular molars were prepared by RaCe and Mtwo nickel-titanium (NiTi) rotary files using the conventional and only one rotary file methods. The working length was 18 mm and the curvatures of the root canals were between 15–45°. By superimposing x-ray images before and after the instrumentation, deviation of the canals was assessed using Adobe Photoshop CS3 software. Preparation time was recorded. Data were analyzed using three-way ANOVA and Tukey’s post hoc test. Results: There were no significant differences between RaCe and Mtwo or between the two root canal preparation methods in root canal deviation in buccolingual and mesiodistal radiographs (P>0.05). Changes of root canal curvature in >35° subgroups were significantly more than in other subgroups with smaller canal curvatures. Preparation time was shorter in one file only technique. Conclusion: According to the results, the two rotary systems and the two root canal preparation methods had equal efficacy in straightening the canals; but the preparation time was shorter in one file only group. PMID:26877736

Comparative evaluation of root canal preparations of maxillary first molars with self-adjusting file, reciproc single file, and revo-s rotary file: A micro-computed tomography study.

PubMed

Ahmetoglu, Fuat; Keles, Ali; Simsek, Neslihan; Ocak, M Sinan; Yologlu, Saim

2015-01-01

This study was aimed to use micro-computed tomography (μ-CT) to evaluate the canal shaping properties of three nickel-titanium instruments, Self-Adjusting File (SAF), Reciproc, and Revo-S rotary file, in maxillary first molars. Thirty maxillary molars were scanned preoperatively by using micro-computed tomography (μ-CT) scans at 13,68 μm resolution. The teeth were randomly assigned to three groups (n = 10). The root canals were shaped with SAF, Reciproc, and Revo-S, respectively. The shaped root canals were rescanned. Changes in canal volumes and surface areas were compared with preoperative values. The data were analyzed using Kruskal-Wallis and Conover's post hoc tests, with p < .05 denoting a statistically significant difference. Preoperatively canal volumes and surface area were statistically similar among the three groups (p > .05). There were statistically significant differences in all measures comparing preoperative and postoperative canal models (p = 0.0001). These differences occurred after instrumentation among the three experimental groups showed no statistically significant difference for volume (p > .05). Surface area showed the similar activity in buccal canals in each of the three techniques whereas no statistically significant difference was detected among surface area, the SAF, and the Revo-S in the palatal (P) canal. Each of three shaping system showed the similar volume activity in all canals, but SAF and Revo-S provided more effectively root planning in comparison with Reciproc in P canal. © Wiley Periodicals, Inc.

The Age-Related Orientational Changes of Human Semicircular Canals.

PubMed

Lyu, Hui-Ying; Chen, Ke-Guang; Yin, Dong-Ming; Hong, Juan; Yang, Lin; Zhang, Tian-Yu; Dai, Pei-Dong

2016-06-01

Some changes are found in the labyrinth anatomy during postnatal development. Although the spatial orientation of semicircular canals was thought to be stable after birth, we investigated the age-related orientational changes of human semicircular canals during development. We retrospectively studied the computed tomography (CT) images of both ears of 76 subjects ranged from 1 to 70 years old. They were divided into 4 groups: group A (1-6 years), group B (7-12 years), group C (13-18 years), and group D (>18 years). The anatomical landmarks of the inner ear structures were determined from CT images. Their coordinates were imported into MATLAB software for calculating the semicircular canals orientation, angles between semicircular canal planes and the jugular bulb (JB) position. Differences between age groups were analyzed using multivariate statistics. Relationships between variables were analyzed using Pearson analysis. The angle between the anterior semicircular canal plane and the coronal plane, and the angle between the horizontal semicircular canal plane and the coronal plane were smaller in group D than those in group A (P<0.05). The JB position, especially the anteroposterior position of right JB, correlated to the semicircular canals orientation (P<0.05). However, no statistically significant differences in the angles between ipsilateral canal planes among different age groups were found. The semicircular canals had tendencies to tilt anteriorly simultaneously as a whole with age. The JB position correlated to the spatial arrangement of semicircular canals, especially the right JB. Our calculation method helps detect developmental and pathological changes in vestibular anatomy.

A study of root canal morphology of human primary incisors and molars using cone beam computerized tomography: an in vitro study.

PubMed

Gaurav, Vivek; Srivastava, Nikhil; Rana, Vivek; Adlakha, Vivek Kumar

2013-01-01

Variations in morphology of root canals in primary teeth usually leads to complications during and after endodontic therapy. To improve the success in endodontics, a thorough knowledge of the root canal morphology is essential. The aim of this study was to assess the variation in number and morphology of the root canals of primary incisors and molars and to study the applicability of cone beam computerized tomography (CBCT) in assessing the same. A total of 60 primary molars and incisors with full root length were collected and various parameters such as the number of roots, number of canals, diameter of root canal at cementoenamel junction and middle-third, length and angulations of roots of primary molars and incisors were studied using CBCT. The observations were put to descriptive statistics to find out the frequency, mean, standard deviation and range for all four subgroups. Further, unpaired t-test was used to compare these parameters between subgroups and analysis of variance test was implemented to evaluate the parameters within the subgroups. The CBCT showed the presence of bifurcation of root canal at middle third in 13% of mandibular incisors while 20% of mandibular molars had two canals in distal root. The diameter of distobuccal root canal of maxillary molars and mesiolingual canal of mandibular molars was found to be minimum. CBCT is a relatively new and effective technology, which provides an auxiliary imaging modality to supplement conventional radiography for assessing the variation in root canal morphology of primary teeth.

9. Tempe Canal, Section 17 (TIN, R5E), looking east towards ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. Tempe Canal, Section 17 (TIN, R5E), looking east towards the mesa. This is the oldest part of the canal still in use. Photographer: Mark Durben, June 1989. Source: SRPA - Tempe Canal, South Side Salt River in Tempe, Mesa & Phoenix, Tempe, Maricopa County, AZ

25. TWIN FALLS MAIN CANAL HEADWORKS FROM UPSTREAM LOOKING TOWARD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. TWIN FALLS MAIN CANAL HEADWORKS FROM UPSTREAM LOOKING TOWARD THE WEST (DAM-TENDER RICHARD CARL ADJUSTING THE GATES TO ALLOW 3400 CFS THROUGH). - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

185. Photocopy of drawing, Twin Falls Canal Company, date unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

185. Photocopy of drawing, Twin Falls Canal Company, date unknown. MILNER DAM CROSS SECTION PLAN, TWIN FALLS COUNTY, MILNER, IDAHO; BLUEPRINT. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

115. ROCK CREEK SIPHON LOW LINE CANAL, TWIN FALLS COUNTY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

115. ROCK CREEK SIPHON LOW LINE CANAL, TWIN FALLS COUNTY, SOUTH OF KIMBERLY IDAHO; WEST VIEW OF SIPHON CROSSING ROCK CREEK. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

96. CEDAR DRAW SPILL, LOW LINE CANAL, TWIN FALLS COUNTY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

96. CEDAR DRAW SPILL, LOW LINE CANAL, TWIN FALLS COUNTY SOUTH OF FILER, IDAHO; OUTLET SIDE OF CEDAR DRAW, WEST VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

113. ROCK CREEK SIPHON LOW LINE CANAL, TWIN FALLS COUNTY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

113. ROCK CREEK SIPHON LOW LINE CANAL, TWIN FALLS COUNTY, SOUTH OF KIMBERLY IDAHO; CLOSE-UP OF INLET SIDE OF SIPHON, NORTHWEST VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

99. POINT SPILL, TWIN FALLS MAIN CANAL, TWIN FALLS COUNTY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

99. POINT SPILL, TWIN FALLS MAIN CANAL, TWIN FALLS COUNTY NORTHWEST OF MURTAUGH, IDAHO; CLOSE-UP OF OUTLET SIDE OF GATES, SOUTH VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

116. ROCK CREEK SIPHON LOW LINE CANAL, TWIN FALLS COUNTY, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

116. ROCK CREEK SIPHON LOW LINE CANAL, TWIN FALLS COUNTY, SOUTH OF KIMBERLY IDAHO; CLOSE-UP OF OUTLET, DIVERSION SPILL IN BACKGROUND, WEST VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

195. Photocopy of drawing, Twin Falls Canal Company, date unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

195. Photocopy of drawing, Twin Falls Canal Company, date unknown. PLAN OF CONSTRUCTION AREA PLANT, TWIN FALLS COUNTY, MILNER, IDAHO; BLUEPRINT. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

182. Photocopy of Photograph, Twin Falls Canal Company. Photographer and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

182. Photocopy of Photograph, Twin Falls Canal Company. Photographer and date unknown. MILNER DAM TUNNELS, TWIN FALLS COUNTY, MILNER, IDAHO; APPROACH TO TUNNELS. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

141. TWIN FALLS MAIN CANAL DIVERSION, TWIN FALLS COUNTY, MILNER, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

141. TWIN FALLS MAIN CANAL DIVERSION, TWIN FALLS COUNTY, MILNER, IDAHO; CLOSE-UP OF MAIN HEADGATES, RADIAL GATES INSIDE, SOUTHEAST VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

137. TWIN FALLS SOUTH SIDE MAIN CANAL DIVERSION HEADGATES, TWIN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

137. TWIN FALLS SOUTH SIDE MAIN CANAL DIVERSION HEADGATES, TWIN FALLS COUNTY, MILNER, IDAHO; OVERALL VIEW OF MAIN HEADGATES, DAM IN BACKGROUND. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

190. Photocopy of drawing, Twin Falls Canal Company, date unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

190. Photocopy of drawing, Twin Falls Canal Company, date unknown. GENERAL PLAN OF MILNER DAM TUNNELS, TWIN FALLS COUNTY, MILNER, IDAHO; BLUEPRINT. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

92. CEDAR DRAW SPILL, HIGH LINE CANAL, TWIN FALLS COUNTY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

92. CEDAR DRAW SPILL, HIGH LINE CANAL, TWIN FALLS COUNTY SOUTH OF FILER, IDAHO; CLOSE-UP OF OUTLET SIDE OF GATES, SOUTH VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

187. Photocopy of drawing, Twin Falls Canal Company, date unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

187. Photocopy of drawing, Twin Falls Canal Company, date unknown. TOPOGRAPHICAL MAP OF MILNER DAM LOCATION, TWIN FALLS COUNTY, MILNER, IDAHO; BLUEPRINT MAP. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

Application of software for automated canal management (SacMan) to the WM lateral canal

USDA-ARS?s Scientific Manuscript database

Simulation studies have demonstrated that automatic control of canals is more effective when feedforward scheduling, or routing of know demand changes, is combined with centralized, automatic, distant, downstream-water-level control. In practice, few canals use this approach. To help further develop...

DOWNSTREAM-WATER-LEVEL CONTROL TEST RESULTS ON THE WM LATERAL CANAL

USDA-ARS?s Scientific Manuscript database

On steep canals, distant downstream water-level control can be challenging. SacMan (Software for Automated Canal Management) was developed, in part, to test various distant downstream water level controllers. It was implemented on the WM canal of the Maricopa Stanfield Irrigation and Drainage Distri...

1. View looking southwest across Dundee Dam and Passaic River ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. View looking southwest across Dundee Dam and Passaic River toward Dundee Canal headgates and guardlock - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

133. FORKS DIVERSION, HIGH LINE AND LOW LINE CANALS, TWIN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

133. FORKS DIVERSION, HIGH LINE AND LOW LINE CANALS, TWIN FALLS COUNTY, SOUTH OF HANSEN, IDAHO; VIEW OF OUTLET SIDE OF LOW LINE GATES. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

78 FR 18479 - Drawbridge Operation Regulations; Inner Harbor Navigation Canal, New Orleans, LA

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-27

... Operation Regulations; Inner Harbor Navigation Canal, New Orleans, LA AGENCY: Coast Guard, DHS. ACTION... across the Inner Harbor Navigation Canal, mile 4.6, at New Orleans, Louisiana. This deviation is... Seabrook Highway crossing the Inner Harbor Navigation Canal, mile 4.6, in New Orleans, Louisiana. The...

156. Photocopy of written record (taken from Twin Falls Canal ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

156. Photocopy of written record (taken from Twin Falls Canal Company, Low Line Book #1, pp.2,3). LOW LINE CONTRACTORS AND BORROW RECORD. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

21 CFR 872.3810 - Root canal post.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Root canal post. 872.3810 Section 872.3810 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3810 Root canal post. (a) Identification. A root canal...

57. Aerial view looking northwest; Botany Worsted Mills at center, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

57. Aerial view looking northwest; Botany Worsted Mills at center, Dundee Canal at right - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

28. View looking north; Botany Worsted Mills building No. 15 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. View looking north; Botany Worsted Mills building No. 15 at left, Dundee Canal at right - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

Matters of simulation of the semicircular canal system

NASA Technical Reports Server (NTRS)

Gurfinkel, V. S.; Petukhov, S. V.

1977-01-01

A scale model of the human semicircular canal system was developed based on the theory of dynamic similitude. This enlarged model makes it convenient to conduct tests on the vestibular processes and dynamics in the semicircular canals. Tests revealed hydromechanical interaction between canals, with asymmetry of the conditions of movement of the endolymph in the canals in opposite directions. A type of vestibular reactions, occurring with angular oscillations of the head, was predicted and demonstrated using this model and human test subjects.

West Bank of the Mississippi River in the Vicinity of New Orleans, LA (East of the Harvey Canal)

DTIC Science & Technology

1994-08-01

bicycle transportation corridors could be approved by the local levee board, state bicycle coordinators, and metropolitan planning organizations. 34 I_...the east side of the Harvey Canal. The area from just east of Peters Road to the Harvey Canal is an industrial corridor . The industries within this... corridor require access to the Harvey Canal. These industries have strongly opposed any alignment that would affect their access to the canal. Severe

Extracting Environmental Benefits from a New Canal in Nicaragua: Lessons from Panama

PubMed Central

Condit, Richard

2015-01-01

Biologists have raised objections to a new canal in Nicaragua, but in this Essay I argue that dire predictions of environmental catastrophe are exaggerated. I present an alternative view based on my research experience in Panama, where Canal operations foster forest conservation. Currently in Nicaragua, the rate of forest loss is so rapid that the canal cannot make it worse. Rather, I contend, adoption of international standards in canal construction could lead to net environmental and social benefits for the country. PMID:26214182

12. VIEW OF WESTERN CANAL AT ALMA SCHOOL ROAD IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. VIEW OF WESTERN CANAL AT ALMA SCHOOL ROAD IN MESA, THE LOCATION AT WHICH THE PECK, PINE AND WALLACE FEEDERS FORMERLY JOINED TO FORM THE WESTERN CANAL. THE PECK AND PINE FEEDERS, NOW KNOWN AS LATERAL 9 AND LATERAL 10, AND ALMOST ENTIRELY PIPED, STILL JOIN THE WESTERN CANAL AT THIS POINT, BUT AN EQUALLY IMPORTANT SOURCE OF SUPPLY IS THE NUMEROUS GROUNDWATER PUMPS LOCATED ON THE SYSTEM. - Western Canal, South side of Salt River between Tempe, Phoenix & Mesa, Mesa, Maricopa County, AZ

13. VIEW OF WESTERN CANAL EAST OF CARRIAGE LANE IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. VIEW OF WESTERN CANAL EAST OF CARRIAGE LANE IN TEMPE, SHOWING DROP STRUCTURE AND GROUNDWATER PUMP. THIS IS THE LAST OF FOUR PUMPS WHICH FEED DIRECTLY INTO THE CANAL BETWEEN ALMA SCHOOL ROAD AND PRICE ROAD. ON THIS DAY, ALL FOUR PUMPS, OPERATING AT FULL OUTPUT, HAVE CONSIDERABLY SWELLED THE FLOW TO THE CANAL. NOTE THE OLD FASHIONED BRICKWORK ON THE NORTH BANK. - Western Canal, South side of Salt River between Tempe, Phoenix & Mesa, Mesa, Maricopa County, AZ

The revised anatomy of the canals connecting the orbit with the cranial cavity.

PubMed

Regoli, Marì; Bertelli, Eugenio

2017-04-01

Orbits are connected with the middle cranial fossa via the optic canal, the superior orbital fissure, the M-type orbitomeningeal foramen, the metoptic canal, an accessory anterior opening of the foramen rotundum, and Warwick's canal. They are also in communication with the anterior cranial fossa via the ethmoidal canals and the A-type orbitomeningeal foramen. The anatomy of these conduits has been recently enriched with several details that are summarized and reviewed in this article.

Ear canal dynamic motion as a source of power for in-ear devices

NASA Astrophysics Data System (ADS)

Delnavaz, Aidin; Voix, Jérémie

2013-02-01

Ear canal deformation caused by temporomandibular joint (jaw joint) activity, also known as "ear canal dynamic motion," is introduced in this paper as a candidate source of power to possibly recharge hearing aid batteries. The geometrical deformation of the ear canal is quantified in 3D by laser scanning of different custom ear moulds. An experimental setup is proposed to measure the amount of power potentially available from this source. The results show that 9 mW of power is available from a 15 mm3 dynamic change in the ear canal volume. Finally, the dynamic motion and power capability of the ear canal are investigated in a group of 12 subjects.

Root Canal Treatment of Mandibular Second Premolar with Three Separate Roots and Canals Using Spiral Computed Tomographic

PubMed Central

Hariharavel, V. P.; Kumar, A. Ashok; Ganesh, C.; Aravindhan, R.

2014-01-01

Anatomic and internal morphology of a root canal system is more complex and differs for each individual tooth of which mandibular premolars have earned the reputation for having aberrant anatomy. The occurrence of three canals with three separate foramina in mandibular second premolars is very rare. A wider knowledge on both clinical and radiological anatomy especially spiral computed tomographic is absolutely essential for the success of endodontic treatment. These teeth may require skillful and special root canal special shaping and obturating techniques. This paper reports an unusual case of a mandibular second premolar with atypical canal pattern that was successfully treated endodontically. PMID:25101187

A geometric analysis of semicircular canals and induced activity in their peripheral afferents in the rhesus monkey

NASA Technical Reports Server (NTRS)

Reisine, H.; Simpson, J. I.; Henn, V.

1988-01-01

Experiments were carried out to determine anatomically the planes of the semicircular canals of two juvenile rhesus monkeys, using plastic casts of the semicircular canals, and the anatomical measurements were related to the directional coding of neural signals transmitted by primary afferents innervating the same simicircular canals. In the experiments, animals were prepared for monitoring the eye position by the implantation of silver-silver chloride electrodes into the bony orbit. Following the recording of semicircular canal afferent activity, the animals were sacrificed; plastic casting resin was injected into the bony canals; and, when the temporal bone was demineralized and removed, the coordinates of points spaced along the circumference of the canal casts were measured. A comparison of the sensitivity vectors determined in these experiments and the anatomical measures showed that the average difference between a sensitivity vector and its respective normal vector was 6.3 deg.

Posterior semicircular canal dehiscence: value of VEMP and multidetector CT.

PubMed

Vanspauwen, R; Salembier, L; Van den Hauwe, L; Parizel, P; Wuyts, F L; Van de Heyning, P H

2006-01-01

To illustrate that posterior semicircular canal dehiscence can present similarly to superior semicircular canal dehiscence. The symptomatology initially presented as probable Menière's disease evolving into a mixed conductive hearing loss with a Carhart notch-type perceptive component suggestive of otosclerosis-type stapes fixation. A small hole stapedotomy resulted in a dead ear and a horizontal semicircular canal hypofunction. Recurrent incapacitating vertigo attacks developed. Vestibular evoked myogenic potential (VEMP) testing demonstrated intact vestibulocollic reflexes. Additional evaluation with high resolution multidetector computed tomography (MDCT) of the temporal bone showed a dehiscence of the left posterior semicircular canal. Besides superior semicircular canal dehiscence, posterior semicircular canal dehiscence has to be included in the differential diagnosis of atypical Menière's disease and/or low tone conductive hearing loss. The value of performing MDCT before otosclerosis-type surgery is stressed. VEMP might contribute to establishing the differential diagnosis.

Environmental pollution and shipping feasibility of the Nicaragua Canal.

PubMed

Chen, Jihong; Zeng, Xin; Deng, Yibing

2016-12-15

In recent years, the Nicaraguan government's renewed interest in constructing this interoceanic canal has once again aroused widespread concern, particularly in the global shipping industry. The project's immense ecological risks, coupled with the recent expansions of both the Panama Canal and the Suez Canal, have raised questions among scientists and experts about its viability. Whether the Nicaragua Canal is really feasible for international shipping, given its high marine pollution risks, requires the further study. This paper discusses and analyses the feasibility of the Nicaragua Canal in the context of its environmental impact and value as a shipping service. This paper aims to provide an important information reference to inform strategic decision-making among policymakers and stakeholders. Our research results indicate that the environmental complexity, economic costs and safety risks of building a new transoceanic canal are simply too high to justify the project. Copyright © 2016 Elsevier Ltd. All rights reserved.

Dislocation of the incus into the external auditory canal after mountain-biking accident.

PubMed

Saito, T; Kono, Y; Fukuoka, Y; Yamamoto, H; Saito, H

2001-01-01

We report a rare case of incus dislocation to the external auditory canal after a mountain-biking accident. Otoscopy showed ossicular protrusion in the upper part of the left external auditory canal. CT indicated the disappearance of the incus, and an incus-like bone was found in the left external auditory canal. There was another bony and board-like structure in the attic. During the surgery, a square-shaped bony plate (1 x 1 cm) was found in the attic. It was determined that the bony plate had fallen from the tegmen of the attic. The fracture line in the posterosuperior auditory canal extending to the fossa incudis was identified. According to these findings, it was considered that the incus was pushed into the external auditory canal by the impact of skull injury through the fractured posterosuperior auditory canal, which opened widely enough for incus dislocation. Copyright 2001 S. Karger AG, Basel

Dilemmas pertaining to three canals in the mesiobuccal root of a maxillary second molar: a case report.

PubMed

Arora, Ankit; Acharya, Shashi Rashmi; Saraswathi, Muliya Vidya; Sharma, Padmaja; Ather, Amber

2013-08-01

The mesiobuccal root of the maxillary molars is well known to pose a hindrance during endodontic therapy. Presented here is a case of a maxillary left second molar where three canals were located in its mesiobuccal root with the use of visual and diagnostic aids. Difficulties encountered during the process of unveiling the tooth's internal anatomy were discussed. The dilemmas encountered pertained to the root canal configuration, the nomenclature of the extra canals, and the justification for the presence of a third canal. The root canal configuration of 3-2-1 was confirmed for the mesiobuccal root using information gained from clinical, radiographic, and multi-detector computed tomography (MDCT) scan findings. This case demonstrates the need for efforts to locate extra canals in the mesiobuccal root of the maxillary molars as their internal anatomy remains a mystery.

Report of a Rare Case: A Maxillary First Molar with Seven Canals Confirmed with Cone-Beam Computed Tomography

PubMed Central

Kumar, Rahul

2014-01-01

Introduction: Coronal anatomic variations in permanent maxillary molars are unusual; conversely variations involving the number of root canals or number of roots are more common. Methods and Materials: This case report presents a successful nonsurgical endodontic therapy of left maxillary first molar with three roots and seven root canals. This unusual morphology was diagnosed using a dental operating microscope (DOM) and confirmed with the help of cone-beam computed tomography (CBCT) images. Results: CBCT axial images showed that both of the palatal and distobuccal roots had Vertucci type II canal pattern, whereas the mesiobuccal root canal showed a Sert and Bayirli’s type XV configuration. Conclusion: The use of a DOM and CBCT imaging in endodontically challenging cases can facilitate a better understanding of the complex root canal anatomy, which ultimately enables the clinician to explore the root canal system, and therefore treat it far more efficiently. PMID:24688587

152. Photocopy of drawing (taken from Twin Falls Canal Company ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

152. Photocopy of drawing (taken from Twin Falls Canal Company Surveyor's Transit Book #363, Page 1). 1912 CONDITION REPORT OF MILNER DAM AREA, TWIN FALLS COUNTY, MILNER, IDAHO. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

54. View looking west along Monroe Street across First Street/Dayton ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

54. View looking west along Monroe Street across First Street/Dayton Avenue and covered Dundee Canal prism - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

194. Photocopy of drawing, Twin Falls Canal Company, date unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

194. Photocopy of drawing, Twin Falls Canal Company, date unknown. PROFILE AND GATE PLAN, NORTH ISLAND CROSS SECTION OF DAM, TWIN FALLS COUNTY, MILNER, IDAHO; BLUEPRINT. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

183. Photocopy of map (Twin Falls Canal Company). TOPOGRAPHICAL MAP ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

183. Photocopy of map (Twin Falls Canal Company). TOPOGRAPHICAL MAP OF MILNER DAM SITE, TWIN FALLS COUNTY, MILNER, IDAHO; MAP, LEFT SIDE ONLY. CROSS REFERENCE: ID-15-192. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

130. FORKS DIVERSION, HIGH LINE AND LOW LINE CANALS, TWIN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

130. FORKS DIVERSION, HIGH LINE AND LOW LINE CANALS, TWIN FALLS COUNTY, SOUTH OF HANSEN, IDAHO; OUTLET SIDE OF THE HIGH LINE GATES, NORTH VIEW. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

Endodontic treatment of mandibular canine with two roots and two canals.

PubMed

Moogi, Prashant P; Hegde, Reshma S; Prashanth, B R; Kumar, G Vinay; Biradar, Nandini

2012-11-01

In majority of cases, mandibular canines have one root and one root canal, although 15% may have two canals. Literature report shows incidence of two-rooted canine as low as 1.7%. This article reports a clinical case of endodontic treatment of mandibular canine with two roots and two canals.

33 CFR 117.661 - Duluth Ship Canal (Duluth-Superior Harbor).

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Duluth Ship Canal (Duluth-Superior Harbor). 117.661 Section 117.661 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF... Ship Canal (Duluth-Superior Harbor). The draw of the Duluth Ship Canal Aerial bridge, mile 0.25 at...

159. Photocopy of written record (taken from Twin Falls Canal ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

159. Photocopy of written record (taken from Twin Falls Canal Company Low Line Book #1, pp. 76,77). RECORD OF BORROW AT LOW LINE SIPHON. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

53. View looking north along First Street/Dayton Avenue, across covered ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

53. View looking north along First Street/Dayton Avenue, across covered Dundee Canal prism, toward Botany Worsted Mills - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

39. View of Botany Worsted Mills looking southeast; buildings No. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

39. View of Botany Worsted Mills looking southeast; buildings No. 39 and 38 at right, Dundee Canal at left - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

55. Aerial view looking north; end of openwater section of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

55. Aerial view looking north; end of open-water section of Dundee Canal at bottom, Botany Worsted Mills at center - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

38. View looking west toward Botany Worsted Mills; railroad bridge ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

38. View looking west toward Botany Worsted Mills; railroad bridge (No.39A) at right, Dundee Canal at center - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

37. View of Botany Worsted Mills looking north; buildings No. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

37. View of Botany Worsted Mills looking north; buildings No. 38 and 39 at left, Dundee Canal at right - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

36. View of Botany Worsted Mills looking north; building No. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

36. View of Botany Worsted Mills looking north; building No. 35 at left, Dundee Canal at right - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

77 FR 42644 - Safety Zone; Canal Fest of the Tonawandas, Erie Canal, Tonawanda, NY

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

.... ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone on the... Canal during the Canal Fest of the Tonawandas Fireworks display. This temporary safety zone is necessary to protect spectators and vessels from the hazards associated with a fireworks display. DATES: This...

Effect of canal preparation with TRUShape and Vortex rotary instruments on three-dimensional geometry of oval root canals.

PubMed

Arias, Ana; Paqué, Frank; Shyn, Stephanie; Murphy, Sarah; Peters, Ove A

2018-04-01

The purpose of this study was to assess the geometry of non-round root canals after preparation with TRUShape (a novel instrument with s-shaped longitudinal design) in comparison to conventional rotary instrumentation using micro-computed tomography. Twenty distal root canals of mandibular molars were randomly distributed in two groups to be shaped with either TRUShape or Vortex rotaries. Percentages of unprepared surface and volume of dentin removal for the entire canal and for the apical 4 mm were calculated. Canal transportation and the structure model index (SMI) were assessed. Data were compared with Student t-tests. Shaping with both techniques resulted in similar prepared surface and volume of dentin removed, as well as the extent of canal transportation. The SMI shape factor was significantly lower for TRUShape preparations (P = 0.04) suggesting less rounding during rotary preparation. Although both instruments were suitable for the preparation of oval canals, TRUShape appeared to better conform to the original ribbon-shaped anatomy. © 2017 Australian Society of Endodontology Inc.

Effectiveness of Rotary Endodontic Instruments on Smear Layer Removal in Root Canals of Primary Teeth: A Scanning Electron Microscopy Study.

PubMed

Subramaniam, Priya; Girish Babu, K L; Tabrez, T A

2016-01-01

The present SEM study was undertaken to evaluate the effect of root canal instrumentation using both manual and rotary files in the root canals of primary anterior teeth. Thirty freshly extracted primary maxillary incisors were divided into 3 groups of 10 teeth each. In Group I, root canals were instrumented with rotary NiTi files; in Group II, the root canals were instrumented using manual NiTi K files and; in Group III, manual instrumentation was done with stainless steel K files. Longitudinal sections were prepared and processed for observation under SEM at the coronal, middle and apical thirds. Scoring of smear layer was done according to Hulsmann and the data obtained was subjected to statistical analysis. Rotary files cleaned the coronal and middle thirds of root canals more effectively. Statistically there was no significant difference between the groups. Lowest score of 2.6 in the apical third of root canals was seen with hand NiTi files. Rotary instrumentation was as effective as manual instrumentation in removal of smear layer in the root canals of primary anterior teeth.

Prevalence of C-Shaped Root Canals in Iranian Population: A Systematic Review

PubMed Central

Naseri, Mandana; Haghighi, Ali Kangarlou; Kharazifard, Mohammad Javad; Khavid, Atefeh

2013-01-01

Objective: Because of the great challenges in the diagnosis and treatment of “C” configuration and lack of any systematic information about its occurrence, the purpose of the present study is to determine the prevalence of C shaped root canals in Iranian population. Methodology: An exhaustive search was undertaken to identify published and unpublished researches related to the C-shaped canals by using key words. The search of the MEDLINE database included all publications from 1966 to May 2012.Then selected articles were obtained and reviewed. Data evaluated and summarized in the data sheet included methodology, population, number of teeth per study (power), number of root canals, type of root canal configuration, and c-shaped canals. Results: Six studies were included with total of 1062 teeth, all in mandibular second molars. The total incidence of C-shaped canals in Iranian population was obtained 6.96%. Conclusions: The incidence of C-shaped canals in Iranian population is 6.96%, which seems much less than Asian populations but nearer to Middle East countries. PMID:23724219

CT detection of facial canal dehiscence and semicircular canal fistula: Comparison with surgical findings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fuse, Takeo; Tada, Yuichiro; Aoyagi, Masaru

1996-03-01

The purpose of this study was to determine the accuracy of high resolution CT (HRCT) in the detection of facial canal dehiscence and semicircular canal fistula, the preoperative evaluation of both of which is clinically very important for ear surgery. We retrospectively reviewed the HRCT findings in 61 patients who underwent mastoidectomy at Yamagata University between 1989 and 1993. The HRCT images were obtained in the axial and semicoronal planes using 1 mm slice thickness and 1 mm intersection gap. In 46 (75%) of the 61 patients, the HRCT image-based assessment of the facial canal dehiscence coincided with the surgicalmore » findings. The data for the facial canal revealed sensitivity of 66% and specificity of 84%. For semicircular canal fistula. in 59 (97%) of the 61 patients, the HRCT image-based assessment and the surgical findings coincided. The image-based assessment in the remaining two patients, who both had massive cholesteatoma, was false-positive. HRCT is useful in the diagnosis of facial canal dehiscence and labyrinthine fistula, but its limitations should also be recognized. 12 refs., 3 figs., 6 tabs.« less

Acceleration induced water removal from ear canals.

NASA Astrophysics Data System (ADS)

Kang, Hosung; Averett, Katelee; Jung, Sunghwan

2017-11-01

Children and adults commonly experience having water trapped in the ear canals after swimming. To remove the water, individuals will shake their head sideways. Since a child's ear canal has a smaller diameter, it requires more acceleration of the head to remove the trapped water. In this study, we theoretically and experimentally investigated the acceleration required to break the surface meniscus of the water in artificial ear canals and hydrophobic-coated glass tubes. In experiments, ear canal models were 3D-printed from a CT-scanned human head. Also, glass tubes were coated with silane to match the hydrophobicity in ear canals. Then, using a linear stage, we measured the acceleration values required to forcefully eject the water from the artificial ear canals and glass tubes. A theoretical model was developed to predict the critical acceleration at a given tube diameter and water volume by using a modified Rayleigh-Taylor instability. Furthermore, this research can shed light on the potential of long-term brain injury and damage by shaking the head to push the water out of the ear canal. This research was supported by National Science Foundation Grant CBET-1604424.

Aetiology, incidence and morphology of the C-shaped root canal system and its impact on clinical endodontics

PubMed Central

Kato, A; Ziegler, A; Higuchi, N; Nakata, K; Nakamura, H; Ohno, N

2014-01-01

The C-shaped root canal constitutes an unusual root morphology that can be found primarily in mandibular second permanent molars. Due to the complexity of their structure, C-shaped root canal systems may complicate endodontic interventions. A thorough understanding of root canal morphology is therefore imperative for proper diagnosis and successful treatment. This review aims to summarize current knowledge regarding C-shaped roots and root canals, from basic morphology to advanced endodontic procedures. To this end, a systematic search was conducted using the MEDLINE, BIOSIS, Cochrane Library, EMBASE, Google Scholar, Web of Science, PLoS and BioMed Central databases, and many rarely cited articles were included. Furthermore, four interactive 3D models of extracted teeth are introduced that will allow for a better understanding of the complex C-shaped root canal morphology. In addition, the present publication includes an embedded best-practice video showing an exemplary root canal procedure on a tooth with a pronounced C-shaped root canal. The survey of this unusual structure concludes with a number of suggestions concerning future research efforts. PMID:24483229

Gender and laterality in semicircular canal dehiscence syndrome.

PubMed

Karimnejad, K; Czerny, M S; Lookabaugh, S; Lee, D J; Mikulec, A A

2016-08-01

To determine if there is gender or laterality predilection in patients with semicircular canal dehiscence syndrome. A multi-institutional chart review was performed to identify patients diagnosed with semicircular canal dehiscence between 2000 and 2015. A systematic literature search was conducted using PubMed to further identify patients with semicircular canal dehiscence. Age, gender and laterality data were collected. Statistical analysis was performed to evaluate for gender or laterality preponderance. A total of 682 patients with semicircular canal dehiscence were identified by literature and chart review. Mean age of diagnosis was 49.75 years (standard deviation = 15.33). Semicircular canal dehiscence was associated with a statistically significant female predominance (chi-square = 7.185, p = 0.007); the female-to-male ratio was 1.2 to 1. Left-sided semicircular canal dehiscence was most common, followed by right-sided then bilateral (chi-square = 23.457, p < 0.001). Semicircular canal dehiscence syndrome is most commonly left-sided and exhibits a female predominance. This may be secondary to morphological cerebral hemisphere asymmetries in both sexes and a predilection of women to seek more medical care than men.

Endodontic treatment of a mandibular second premolar with three root canals.

PubMed

Aguiar, Carlos; Mendes, Daniela; Câmara, Andréa; Figueiredo, Jose

2010-03-01

The purpose of this case report is to describe a nonsurgical endodontic treatment of a mandibular left second premolar with two separate roots and three distinct root canals. In endodontics, the possible existence of extra canals must be considered before endodontic treatment is instituted. A wide morphological variation of the root canal system is known to exist. A 36-year-old male patient was referred for endodontic treatment on the left mandibular second premolar. Radiographic examination of the involved tooth revealed an unusual, complex root canal anatomy. There was an irregular root morphology consisting of two distinct roots and three canals. This case report describes the successful nonsurgical endodontic treatment of a mandibular left second premolar with two separate roots and three distinct root canals filled using size 35 Thermafil gutta-percha carriers and AH Plus sealer. On the one-year follow-up radiograph, the tooth was asymptomatic, confirming adequate healing with no complications. Even in a tooth with an extremely complex root canal morphology, conventional endodontic treatment without surgical intervention can result in adequate healing without any complications.

Study of Mastoid Canals and Grooves in North Karnataka Human Skulls

PubMed Central

Hadimani, Gavishiddappa Andanappa; Bagoji, Ishwar Basavantappa

2013-01-01

Introduction: This study was undertaken to observe the frequency of mastoid canals and grooves in north Karnataka dry human skulls. 100 dry human skulls of unknown age and sex from the department of Anatomy were selected and observed for the present study. Material and Methods: The mastoid regions of dry skulls were observed for the presence of mastoid canals and grooves, if any. A metallic wire was passed through the canal for its confirmation and then the length was measured. Results: The Mastoid canals were present in 53% of the total 100 skulls observed either bilaterally or unilaterally. Mastoid grooves were present in 18% of the total skulls (100) observed. Double mastoid canal was found in 01% of total skull studied and both Mastoid canals & Mastoid grooves together were present in 02% of the total skulls (100) observed. Conclusion: The knowledge of mastoid canals and grooves is very important for otolaryngologists and neurosurgeons. Because they contain an arterial branch of occipital artery with its accompanying vein which is liable to injury resulting into severe bleeding. PMID:24086832

The shaping effects of three nickel-titanium rotary instruments in simulated S-shaped canals.

PubMed

Yoshimine, Y; Ono, M; Akamine, A

2005-05-01

The purpose of this study was to compare the shaping effects of three nickel-titanium rotary instruments, ProTaper, K3, and RaCe, with emphasis on canal transportation. Simulated canals with an S-shaped curvature in clear resin blocks were prepared with a torque-control, low-speed engine. Canals were prepared using the crown-down technique to the size of #30. Canal aberrations were assessed by comparing the pre- and postinstrumentation images under a stereomicroscope. ProTaper instruments caused greater widening of canals compared to K3 or RaCe. Furthermore, ProTaper files showed a tendency to ledge or zip formation at the end-point of preparation. These canal aberrations may be caused by ProTaper finishing files, which appear to be less flexible than other files of the same tip-size, because of their greater taper-size. These results suggest that nickel-titanium file systems including less tapered, more flexible instruments, like K3 and RaCe should be used in the apical preparation of canals with a complicated curvature.

Evaluation of the preparation of the coronal part of the mesial canals of lower molars.

PubMed

Sinan, A; Georgelin-Gurgel, M; Diemer, F

2011-03-01

Canal entrances can be flared using specific, low speed, continuously rotating Ni-Ti instruments. Two such instruments were evaluated for their capacity to flare the canal entrance while respecting the initial canal axis. Lower molars (n = 20) with two distinct mesial canals were prepared to within 2.5 mm of the pulp chamber floor using Bramante's technique. Canal entrances were flared with a QUANTEC FLARE LX or an ENDOFLARE. They both had a 0.12 taper and a #25 tip diameter. The instruments were first inserted in the canals using an axial movement and then withdrawn with a selective circumferential brushing action. Photographs taken before and after each preparation were compared. No ledging or significant modification of the working length was noted. The centre of mass was displaced on average by 0.138 mm with no brushing action and 0.274 mm with brushing action. In most cases (87.5%), the centre of mass was displaced mesially. The two instruments behaved in an identical mode, both before (p = 0.3497) and after (p = 0.9304) the brushing action. Ni-Ti flaring instruments can be used to flare the canal entrance with little displacement of the initial canal axis, even when a brushing action is used.

Yard flooding by irrigation canals increased the risk of West Nile disease in El Paso, Texas

PubMed Central

Cardenas, Victor M.; Jaime, Javier; Ford, Paula B.; Gonzalez, Fernando J.; Carrillo, Irma; Gallegos, Jorge E.; Watts, Douglas M.

2011-01-01

Purpose To investigate the effects of use of water from irrigation canals to flood residential yards on the risk of West Nile disease in El Paso, Texas. Methods West Nile disease confirmed cases in 2009–2010 were compared with a random sample of 50 residents of the county according to access to and use of water from irrigation canals by subjects or their neighbors, as well as geo-referenced closest distance between their home address and the nearest irrigation canal. A windshield survey of 600 meters around the study subjects’ home address recorded the presence of irrigation canals. The distance from the residence of 182 confirmed cases of West Nile disease reported in 2003–2010 to canals was compared to that of the centroids of 182 blocks selected at random. Results Cases were more likely than controls to report their neighbors flooded their yards with water from canals. Irrigation canals were more often observed in neighborhoods of cases than of controls. Using the set of addresses of 182 confirmed cases and 182 hypothetic controls the authors found a statistically significant inverse relation with risk of West Nile disease. Conclusions Flooding of yards with water from canals increased the risk of West Nile disease. PMID:21943648

Yard flooding by irrigation canals increased the risk of West Nile disease in El Paso, Texas.

PubMed

Cardenas, Victor M; Jaime, Javier; Ford, Paula B; Gonzalez, Fernando J; Carrillo, Irma; Gallegos, Jorge E; Watts, Douglas M

2011-12-01

To investigate the effects of use of water from irrigation canals to flood residential yards on the risk of West Nile disease in El Paso, Texas. West Nile disease confirmed cases in 2009 through 2010 were compared with a random sample of 50 residents of the county according to access to and use of water from irrigation canals by subjects or their neighbors, as well as geo-referenced closest distance between their home address and the nearest irrigation canal. A windshield survey of 600 m around the study subjects' home address recorded the presence of irrigation canals. The distance from the residence of 182 confirmed cases of West Nile disease reported in 2003 through 2010 to canals was compared with that of the centroids of 182 blocks selected at random. Cases were more likely than controls to report their neighbors flooded their yards with water from canals. Irrigation canals were more often observed in neighborhoods of cases than of controls. Using the set of addresses of 182 confirmed cases and 182 hypothetical controls the authors found a significant, inverse relation with risk of West Nile disease. Flooding of yards with water from canals increased the risk of West Nile disease. Copyright © 2011 Elsevier Inc. All rights reserved.

Cyclic fatigue resistance of new reciprocating glide path files in 45- and 60-degree curved canals.

PubMed

Topçuoğlu, H S; Topçuoğlu, G; Kafdağ, Ö; Arslan, H

2018-02-26

To compare the cyclic fatigue resistance of R-PILOT and WaveOne Gold Glider files in curved artificial canals. A total of 60 new R-PILOT and WaveOne Gold Glider files were tested in artificial canals with 45° and 60° angles of curvature. Fifteen new files of each brand were tested in both canals. Cyclic fatigue resistance was determined by recording the time to file fracture in the artificial canals. The length of each fractured fragment was also recorded. An independent sample t-test was used to analyse the data. In the canal with a 45° angle of curvature, no significant differences were observed between the R-PILOT and WaveOne Gold Glider files (P > 0.05). In the canal with a 60° angle of curvature, WaveOne Gold Glider files had greater cyclic fatigue resistance than R-PILOT files (P < 0.05). There was no difference between the files in terms of the lengths of fractured fragments in canals with 45° and 60° angles of curvature (P > 0.05). WaveOne Gold Glider files exhibited greater cyclic fatigue resistance than R-PILOT files in artificial canals with a 60° angle of curvature. © 2018 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Canal transportation and centering ability of protaper and self-adjusting file system in long oval canals: An ex-vivo cone-beam computed tomography analysis.

PubMed

Shah, Dipali Yogesh; Wadekar, Swati Ishwara; Dadpe, Ashwini Manish; Jadhav, Ganesh Ranganath; Choudhary, Lalit Jayant; Kalra, Dheeraj Deepak

2017-01-01

The purpose of this study was to compare and evaluate the shaping ability of ProTaper (PT) and Self-Adjusting File (SAF) system using cone-beam computed tomography (CBCT) to assess their performance in oval-shaped root canals. Sixty-two mandibular premolars with single oval canals were divided into two experimental groups ( n = 31) according to the systems used: Group I - PT and Group II - SAF. Canals were evaluated before and after instrumentation using CBCT to assess centering ratio and canal transportation at three levels. Data were statistically analyzed using one-way analysis of variance, post hoc Tukey's test, and t -test. The SAF showed better centering ability and lesser canal transportation than the PT only in the buccolingual plane at 6 and 9 mm levels. The shaping ability of the PT was best in the apical third in both the planes. The SAF had statistically significant better centering and lesser canal transportation in the buccolingual as compared to the mesiodistal plane at the middle and coronal levels. The SAF produced significantly less transportation and remained centered than the PT at the middle and coronal levels in the buccolingual plane of oval canals. In the mesiodistal plane, the performance of both the systems was parallel.

Variable permanent mandibular first molar: Review of literature

PubMed Central

Ballullaya, Srinidhi V; Vemuri, Sayesh; Kumar, Pabbati Ravi

2013-01-01

Introduction: The success of root canal therapy depends on the locations of all the canals, thourough debridement and proper sealing. At times the clinicians are challenged with variations in morphology of root canal. This review article attempts to list out all the variations of permanent mandibular first molar published so for in the literature. Materials and Methods: An exhaustive search was undertaken using PUBMED database to identify published literature from 1900 to 2010 relating to the root canal morphology of permanent first molar by using key words. The selected artcles were obtained and reviewed. Results: Total ninty seven articles were selected out of which 50 were original article and forty seven were case reports. The incidence of third canal in mesial root was 0.95% to 15%. The incidence of three rooted mandibular first molar was 3% to 33%. Only ninety cases reported with c-shape canal configuration. Incidence of Taurodintism without congenital disorder was very rare. Conclusion: The root canal treatment requires proper knowlegde of variations in root canal morphology in order to recognise, disinfect and seal all portal of exit. This can be accomplished with proper diagnosis using newer modes, modification in access preparation, use of operating microscope, enhanced methods of disinfecting and sealing of all canals. PMID:23716959

Evaluation of the root canal shaping ability of two rotary nickel-titanium systems.

PubMed

Al-Manei, K K; Al-Hadlaq, S M S

2014-10-01

The aim was to investigate the canal shaping abilities of the twisted file (TF) and GT series X file (GTX) systems. Sixty mesial root canals of mandibular molars with curvatures of 15-50° were divided randomly into two groups of 30 canals each. The teeth were sectioned horizontally at 3, 6 and 9 mm from the apex. Root canals were prepared with TF and GTX files, respectively, and the shaping abilities of the systems were evaluated at three levels (coronal, middle and apical) based on the comparison of pre- and post-instrumentation photographs using AutoCAD software. Preparation time was also assessed. Data from the two groups were compared statistically using the Student's t-test. There was no significant difference between the rotary systems in terms of change in root canal cross-sectional area, root canal transportation, centring ability or minimum dentine thickness. Remaining dentine thickness at the coronal and middle levels was similar in the TF and GTX groups, but GTX instruments left significantly less dentine than TF instruments on the mesial aspects of root canals at the apical level. Root canal preparation with TF instruments required significantly less time than with GTX instruments. The TF and GTX NiTi rotary instruments showed similar shaping abilities, but root canal preparation was more rapid with the TF than with the GTX system. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Influence of Heat Treatment of Nickel-Titanium Rotary Endodontic Instruments on Apical Preparation: A Micro-Computed Tomographic Study.

PubMed

de Almeida, Bernardo Corrêa; Ormiga, Fabíola; de Araújo, Marcos César Pimenta; Lopes, Ricardo Tadeu; Lima, Inayá Corrêa Barbosa; dos Santos, Bernardo Camargo; Gusman, Heloisa

2015-12-01

The aim of this study was to make a 3-dimensional comparison of the canal transportation and changes in apical geometry using micro-computed tomographic imaging after canal preparation with K3 (SybronEndo, Orange, CA) and K3XF (SybronEndo) file systems. Twenty-eight mandibular molars were randomly divided into 2 groups according to the rotary system used in instrumentation: K3 or K3XF. The specimens were scanned by micro-computed tomographic imaging before and after instrumentation. Images before and after instrumentation from each group were compared with regard to canal volume, surface area, and structure model index (SMI) (paired t test, P < .05). After instrumentation, the canals from each group were compared regarding the changes in volume, surface area, SMI, and canal transportation in the last 4 apical mm (t test, P < .05). Instrumentation with the 2 rotary systems significantly changed the canal volume, surface area, and SMI (P < .05). There were no significant differences between instrument types concerning these parameters (P > .05). There were no significant differences between the 2 groups with regard to canal transportation in the last 4 apical mm (P > .05). Both rotary systems showed adequate canal preparations with reduced values of canal transportation. Heat treatment did not influence changes in root canal geometry in the apical region. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Present and future in the use of micro-CT scanner 3D analysis for the study of dental and root canal morphology.

PubMed

Grande, Nicola M; Plotino, Gianluca; Gambarini, Gianluca; Testarelli, Luca; D'Ambrosio, Ferdinando; Pecci, Raffaella; Bedini, Rossella

2012-01-01

The goal of the present article is to illustrate and analyze the applications and the potential of microcomputed tomography (micro-CT) in the analysis of tooth anatomy and root canal morphology. The authors performed a micro-CT analysis of the following different teeth: maxillary first molars with a second canal in the mesiobuccal (MB) root, mandibular first molars with complex anatomy in the mesial root, premolars with single and double roots and with complicated apical anatomy. The hardware device used in this study was a desktop X-ray microfocus CT scanner (SkyScan 1072, SkyScan bvba, Aartselaar, Belgium). A specific software ResolveRT Amira (Visage Imaging) was used for the 3D analysis and imaging. The authors obtained three-dimensional images from 15 teeth. It was possible to precisely visualize and analyze external and internal anatomy of teeth, showing the finest details. Among the 5 upper molars analyzed, in three cases, the MB canals joined into one canal, while in the other two molars the two mesial canals were separate. Among the lower molars two of the five samples exhibited a single canal in the mesial root, which had a broad, flat appearance in a mesiodistal dimension. In the five premolar teeth, the canals were independent; however, the apical delta and ramifications of the root canals were quite complex. Micro-CT offers a simple and reproducible technique for 3D noninvasive assessment of the anatomy of root canal systems.

Evaluation of the Root and Canal Morphology of Maxillary Permanent Molars and the Incidence of the Second Mesiobuccal Root Canal in Greek Population Using Cone-beam Computed Tomography

PubMed Central

Nikoloudaki, Georgia E.; Kontogiannis, Taxiarchis G.; Kerezoudis, Nikolaos P.

2015-01-01

Objectives: Cone-Beam Computed Tomography is an alternative imaging technique which has been recently introduced in the field of Oral & Maxillofacial Radiology. It has rapidly gained great popularity among clinicians due to its ability to detect lesions and defects of the orofacial region and provide three-dimensional information about them. In the field of Endodontics, CBCT can be a useful tool to reveal tooth morphology irregularities, additional root canals and vertical root fractures. The objective of this study is to evaluate the root and root canal morphology of the maxillary permanent molars in Greek population using Cone-Beam Computed Tomography. Materials and Methods : 273 cone-beam computed tomography (CBCT) images were examined. The number of roots and root canals of the first and second maxillary molars were evaluated. Root canal configuration was classified according to Weine’s classification by two independent examiners and statistical analysis was performed. Results : A total of 812 molars (410 first and 402 second ones) were evaluated. The vast majority of both first and second molars had three roots (89.26% and 85.07%, respectively). Most first molars had four canals, while most second molars had three. In the mesiobuccal roots, one foramen was recorded in 80.91% of all teeth. Other rare morphologic variations were also found, such as fusion of a maxillary second molar with a supernumerary tooth. Conclusion : Within the limitations of this study, it can be concluded that more attention should be given to the detection of additional canals during root canal treatment in maxillary permanent molars. Towards this effort, CBCT can provide the clinician with supplemental information about the different root canal configurations for successful Root Canal Treatment. PMID:26464594

Comparative study of 6 rotary nickel-titanium systems and hand instrumentation for root canal preparation in severely curved root canals of extracted teeth.

PubMed

Celik, Davut; Taşdemir, Tamer; Er, Kürşat

2013-02-01

Some improvements have been developed with new generations of nickel-titanium (NiTi) rotary instruments that led to their successful and extensive application in clinical practice. The purpose of this in vitro study was to compare the root canal preparations performed by using GT Series X and Twisted File systems produced by innovative manufacturing process with Revo-S, RaCe, Mtwo, and ProTaper Universal systems manufactured directly from conventional nitinol and with stainless steel K-Flexofile instruments. The mesiobuccal root canals of 140 maxillary first permanent molars that had between 30°-40° curvature angle and 4- to 9-mm curvature radius of the root canal were used. After root canal preparations made by using GT Series X, Twisted File, Revo-S, RaCe, Mtwo, and ProTaper Universal NiTi rotary systems and stainless steel K-Flexofile instruments, transportation occurred in the root canal, and alteration of working length (WL) was assessed by using a modified double-digital radiographic technique. The data were compared by the post hoc Tukey honestly significant difference test. NiTi rotary systems caused less canal transportation and alteration of WL than K-Flexofile instruments (P < .05). There was no significant difference between NiTi rotary system groups at any levels (P > .05) except 2.5 mm from the WL. At this level ProTaper Universal system caused significant canal transportation (P < .05). GT Series X and Twisted File rotary systems produced with innovative process were concluded to shape the curved canals to result in minimal canal transportation, similar to Revo-S, RaCe, Mtwo, and ProTaper Universal rotary systems manufactured by traditional methods. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Effect of glide path and apical preparation size on the incidence of apical crack during the canal preparation using Reciproc, WaveOne, and ProTaper Next systems in curved root canals: A stereomicroscope study.

PubMed

Topçuoğlu, Hüseyin Sinan; Düzgün, Salih; Akpek, Firdevs; Topçuoğlu, Gamze

2016-11-01

This study evaluated the effect of creating a glide path and apical preparation size on the incidence of apical cracks during canal preparation in mandibular molar teeth with curved canals. One hundred and forty extracted teeth were used. The teeth were randomly assigned to one control group or six experimental groups (n = 20 per group) for canal preparation. No preparation was performed on teeth in the control group. In three of the six experimental groups, a glide path was not created; a glide path was created on the curved mesial canals of all teeth in the remaining three experimental groups. All teeth in experimental groups were then instrumented with the following systems: Reciproc, WaveOne (WO), and ProTaper Next (PTN). Digital images of the apical root surfaces of these teeth were recorded before preparation, after instrumentation with size 25 files, and after instrumentation with size 40 files. The images were then inspected for the presence of any new apical cracks and propagation. There was no significant difference between the experimental groups during canal preparation using size 25 files (p > 0.05). Reciproc and WO caused more new apical cracks than did PTN during canal preparation using size 40 files (p < 0.05). However, canal preparation using size 40 files did not cause propagation of existing cracks (p > 0.05). Performing a glide path prior to canal preparation did not change the incidence of apical crack during preparation. Additionally, increasing apical preparation size may increase the incidence of apical crack during canal preparation. SCANNING 38:585-590, 2016. © 2016 Wiley Periodicals, Inc. © Wiley Periodicals, Inc.

The effect of cervical preflaring using different rotary nickel-titanium systems on the accuracy of apical file size determination.

PubMed

Tennert, Christian; Herbert, Josef; Altenburger, Markus Jörg; Wrbas, Karl-Thomas

2010-10-01

An exact determination of the apical root canal diameter is crucial for correct cleaning and shaping of a root canal. The aim of this study was to investigate the discrepancies of the initial apical root canal diameter and the diameter that is measured by the initial apical file (IAF) after cervical flaring using current rotary nickel-titanium systems. Mesiobuccal canals of 40 extracted mandibular molars were randomly assigned to four groups. In the first group, root canals were not flared. Root canals of the other groups were preflared using FlexMaster (VDW, Munich, Germany), ProTaper (Dentsply, Konstanz, Germany), or RaCe (FKG Dentaire, Genf, Switzerland) instruments. The tooth length was determined by inserting an ISO 06 K-file to the apical foramen. The working length (WL) was set 1 mm short of the apical foramen. File sizes were increased after binding sensation was felt at the WL. Transversal sections of the WL regions were examined under stereomicroscope, and the diameter of the root canal and the IAF at WL were assessed. Canals preflared with RaCe instruments had the lowest discrepancy between the apical root canal diameter and the IAF diameter (15.7 ± 9.7 μm) followed by ProTaper (22.2 ± 11.0 μm) and FlexMaster (35.0 ± 17.2 μm). Preflaring of root canals prevents underestimation of the actual apical root canal diameter. The type of instruments used for preflaring show differences on the accuracy of IAF determination. Preflaring with larger tapered instruments leads to a more accurate apical sizing, and this information is crucial concerning the appropriate final diameter for complete apical shaping. Copyright © 2010 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Geometric analysis of root canals prepared by four rotary NiTi shaping systems.

PubMed

Hashem, Ahmed Abdel Rahman; Ghoneim, Angie Galal; Lutfy, Reem Ahmed; Foda, Manar Yehia; Omar, Gihan Abdel Fatah

2012-07-01

A great number of nickel-titanium (NiTi) rotary systems with noncutting tips, different cross-sections, superior resistance to torsional fracture, varying tapers, and manufacturing method have been introduced to the market. The purpose of this study was to evaluate and compare the effect of 4 rotary NiTi preparation systems, Revo-S (RS; Micro-Mega, Besancon Cedex, France), Twisted file (TF; SybronEndo, Amersfoort, The Netherlands), ProFile GT Series X (GTX; Dentsply, Tulsa Dental Specialties, Tulsa, OK), and ProTaper (PT; Dentsply Maillefer, Ballaigues, Switzerland), on volumetric changes and transportation of curved root canals. Forty mesiobuccal canals of mandibular molars with an angle of curvature ranging from 25° to 40° were divided according to the instrument used in canal preparation into 4 groups of 10 samples each: group RS, group TF, group GTX, and group PT. Canals were scanned using an i-CAT CBCT scanner (Imaging Science International, Hatfield, PA) before and after preparation to evaluate the volumetric changes. Root canal transportation and centering ratio were evaluated at 1.3, 2.6, 5.2, and 7.8 mm from the apex. The significance level was set at P ≤ .05. The PT system removed a significantly higher amount of dentin than the other systems (P = .025). At the 1.3-mm level, there was no significant difference in canal transportation and centering ratio among the groups. However, at the other levels, TF maintained the original canal curvature recording significantly the least degree of canal transportation as well as the highest mean centering ratio. The TF system showed superior shaping ability in curved canals. Revo-S and GTX were better than ProTaper regarding both canal transportation and centering ability. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Computed Tomographic Morphometry of the Internal Anatomy of Mandibular Second Primary Molars.

PubMed

Kurthukoti, Ameet J; Sharma, Pranjal; Swamy, Dinesh Francis; Shashidara, R; Swamy, Elaine Barretto

2015-01-01

Need for the study: The most important procedure for a successful endodontic treatment is the cleaning and shaping of the canal system. Understanding the internal anatomy of teeth provides valuable information to the clinician that would help him achieve higher clinical success during endodontic therapy. To evaluate by computed tomography-the internal anatomy of mandibular second primary molars with respect to the number of canals, cross-sectional shape of canals, cross-sectional area of canals and the root dentin thickness. A total of 31 mandibular second primary molars were subjected to computed-tomographic evaluation in the transverse plane, after mounting them in a prefabricated template. The images, thus, obtained were analyzed using De-winter Bio-wizard® software. All the samples demonstrated two canals in the mesial root, while majority of the samples (65.48%) demonstrated two canals in the distal root. The cross-sectional images of the mesial canals demonstrated a round shape, while the distal canals demonstrated an irregular shape. The root dentin thickness was highly reduced on the distal aspect of mesial and mesial aspect of distal canals. The mandibular second primary molars demonstrated wide variation and complexities in their internal anatomy. A thorough understanding of the complexity of the root canal system is essential for understanding the principles and problems of shaping and cleaning, determining the apical limits and dimensions of canal preparations, and for performing successful endodontic procedures. How to cite this article: Kurthukoti AJ, Sharma P, Swamy DF, Shashidara R, Swamy EB. Computed Tomographic Morphometry of the Internal Anatomy of Mandibular Second Primary Molars. Int J Clin Pediatr Dent 2015;8(3):202-207.

[Non-destructive, preclinical evaluation of root canal anatomy of human teeth with flat-panel detector volume CT (FD-VCT)].

PubMed

Heidrich, G; Hassepass, F; Dullin, C; Attin, T; Grabbe, E; Hannig, C

2005-12-01

Successful endodontic diagnostics and therapy call for adequate depiction of the root canal anatomy with multimodal diagnostic imaging. The aim of the present study is to evaluate visualization of the endodont with flat-panel detector volume CT (FD-VCT). 13 human teeth were examined with the prototype of a FD-VCT. After data acquisition and generation of volume data sets in volume rendering technology (VRT), the findings obtained were compared to conventional X-rays and cross-section preparations of the teeth. The anatomical structures of the endodont such as root canals, side canals and communications between different root canals as well as denticles could be detected precisely with FD-VCT. The length of curved root canals was also determined accurately. The spatial resolution of the system is around 140 microm. Only around 73 % of the main root canals detected with FD-VCT and 87 % of the roots could be visualized with conventional dental X-rays. None of the side canals, shown with FD-VCT, was detectable on conventional X-rays. In all cases the enamel and dentin of the teeth could be well delineated. No differences in image quality could be discerned between stored and freshly extracted teeth, or between primary and adult teeth. FD-VCT is an innovative diagnostic modality in preclinical and experimental use for non-destructive three-dimensional analysis of teeth. Thanks to the high isotropic spatial resolution compared with conventional X-rays, even the minutest structures, such as side canals, can be detected and evaluated. Potential applications in endodontics include diagnostics and evaluation of all steps of root canal treatment, ranging from trepanation through determination of the length of the root canal to obturation.

Computed Tomographic Morphometry of the Internal Anatomy of Mandibular Second Primary Molars

PubMed Central

Sharma, Pranjal; Swamy, Dinesh Francis; Shashidara, R; Swamy, Elaine Barretto

2015-01-01

ABSTRACT Need for the study: The most important procedure for a successful endodontic treatment is the cleaning and shaping of the canal system. Understanding the internal anatomy of teeth provides valuable information to the clinician that would help him achieve higher clinical success during endodontic therapy. Aims: To evaluate by computed tomography—the internal anatomy of mandibular second primary molars with respect to the number of canals, cross-sectional shape of canals, cross-sectional area of canals and the root dentin thickness. Materials and methods: A total of 31 mandibular second primary molars were subjected to computed-tomographic evaluation in the transverse plane, after mounting them in a prefabricated template. The images, thus, obtained were analyzed using De-winter Bio-wizard® software. Results: All the samples demonstrated two canals in the mesial root, while majority of the samples (65.48%) demonstrated two canals in the distal root. The cross-sectional images of the mesial canals demonstrated a round shape, while the distal canals demonstrated an irregular shape. The root dentin thickness was highly reduced on the distal aspect of mesial and mesial aspect of distal canals. Conclusion: The mandibular second primary molars demonstrated wide variation and complexities in their internal anatomy. A thorough understanding of the complexity of the root canal system is essential for understanding the principles and problems of shaping and cleaning, determining the apical limits and dimensions of canal preparations, and for performing successful endodontic procedures. How to cite this article: Kurthukoti AJ, Sharma P, Swamy DF, Shashidara R, Swamy EB. Computed Tomographic Morphometry of the Internal Anatomy of Mandibular Second Primary Molars. Int J Clin Pediatr Dent 2015;8(3):202-207. PMID:26628855

The Use of a Novel Approach for the Instrumentation of a Cone-beam Computed Tomography-discernible Lateral Canal in an Unusual Maxillary Incisor: Case Report.

PubMed

Chaniotis, Antonis; Filippatos, Christos G

2017-06-01

Lateral and apical ramifications of the main root canal create potential pathways through which bacteria can spread and remain unaffected by treatment procedures. It is a challenge for the specialty to find techniques that can predictably reach, disinfect, and obturate these ramifications. Here, we report the use of a novel instrumentation approach to aid in the negotiation and management of a lateral canal discernible on cone-beam computed tomography (CBCT) in an unusual maxillary central incisor. A 23-year-old female patient was referred for evaluation and possible treatment of tooth 9. The periapical radiographic examination revealed pulp chamber obliteration, existence of a lateral lesion, and a possible complex internal root canal anatomy. The CBCT evaluation revealed the existence of a lateral lesion, a periapical lesion, an additional distopalatal canal, and a lateral canal exiting at the lateral lesion. The diagnosis of asymptomatic apical and lateral periodontitis of tooth 9 was reached. CBCT-aided access cavity preparation and scouting resulted in the successful negotiation of all canals, main and lateral. A novel instrumentation technique with precurved controlled memory files was used for the mechanical preparation of the lateral canal to a 25/04 enlargement. Obturaton of the lateral canal was achieved with a single gutta-percha cone and AH Plus Root Canal Sealer. At the 2-year follow-up, the patient was asymptomatic, and the 2-dimensional radiographic examinations revealed resolution of both the periapical and the lateral lesions. This case report describes the application of a novel instrumentation technique for the mechanical debridement of an infected lateral canal discernible on CBCT and reinforces the importance of treating the root canals as systems that possesses anatomic intricacies that need to be addressed. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Survey of Anatomy and Root Canal Morphology of Maxillary First Molars Regarding Age and Gender in an Iranian Population Using Cone-Beam Computed Tomography

PubMed Central

Naseri, Mandana; Safi, Yaser; Akbarzadeh Baghban, Alireza; Khayat, Akbar; Eftekhar, Leila

2016-01-01

Introduction: The purpose of this study was to investigate the root and canal morphology of maxillary first molars with regards to patients’ age and gender with cone-beam computed tomography (CBCT). Methods and Materials: A total of 149 CBCT scans from 92 (67.1%) female and 57 (31.3%) male patients with mean age of 40.5 years were evaluated. Tooth length, presence of root fusion, number of the roots and canals, canal types based on Vertucci’s classification, deviation of root and apical foramen in coronal and sagittal planes and the correlation of all items with gender and age were recorded. The Mann Whitney U, Kruskal Wallis and Fisher’s exact tests were used to analyze these items. Results: The rate of root fusion was 1.3%. Multiple canals were present in the following frequencies: four canals 78.5%, five canals 11.4% and three canals 10.1%. Additional canal was detected in 86.6% of mesiobuccal roots in which Vertucci’s type VI configuration was the most prevalent followed by type II and I. Type I was the most common one in distobuccal and palatal roots. There was no statistically significant difference in the canal configurations in relation to gender and age as well as the incidence root or canal numbers (P>0.05). The mean tooth length was 19.3 and 20.3 mm in female and male patients, respectively which was statistically significant (P<0.05). Evaluation of root deviation showed that most commonly, a general pattern of straight-distal in the mesiobuccal and straight-straight for distobuccal and palatal roots occurred. In mesiobuccal roots, straight and distal deviations were more dominant in male and female, respectively (P<0.05). The prevalence of apical foramen deviation in mesiobuccal and palatal roots statistically differed with gender. Conclusion: The root and canal configuration of Iranian population showed different features from those of other populations. PMID:27790259

Osmolarity and root canal antiseptics.

PubMed

Rossi-Fedele, G; Guastalli, A R

2014-04-01

Antiseptics used in endodontics for disinfection purposes include root canal dressings and irrigants. Osmotic shock is known to cause the alteration of microbial cell viability and might have a role in the mechanism of action of root canal antiseptics. The aim of this review was to determine the role of osmolarity on the performance of antiseptics in root canal treatment. A literature search using the Medline electronic database was conducted up to 30 May 2013 using the following search terms and combinations: 'osmolarity AND root canal or endodontic or antiseptic or irrigation or irrigant or medication or dressing or biofilm; osmolality AND root canal or endodontic or antiseptic or irrigation or irrigant or medication or dressing or biofilm; osmotic AND root canal or endodontic or antiseptic or irrigation or irrigant or medication or dressing or biofilm; osmosis AND root canal or endodontic or antiseptic or irrigation or irrigant or medication or dressing or biofilm; sodium chloride AND root canal or endodontic or antiseptic or irrigation or irrigant or medication or dressing or biofilm'. Publications were included if the effects of osmolarity on the clinical performance of antiseptics in root canal treatment were stated, if preparations with different osmolarities values were compared and if they were published in English. A hand search of articles published online, 'in press' and 'early view', and in the reference list of the included papers was carried out following the same criteria. A total of 3274 publications were identified using the database, and three were included in the review. The evidence available in endodontics suggests a possible role for hyperosmotic root canal medicaments as disinfectants, and that there is no influence of osmolarity on the tissue dissolution capacity of sodium hypochlorite. There are insufficient data to obtain a sound conclusion regarding the role of hypo-osmosis in root canal disinfection, or osmosis in any further desirable ability. © 2013 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Micro-CT evaluation of several glide path techniques and ProTaper Next shaping outcomes in maxillary first molar curved canals.

PubMed

Alovisi, M; Cemenasco, A; Mancini, L; Paolino, D; Scotti, N; Bianchi, C C; Pasqualini, D

2017-04-01

To evaluate the ability of ProGlider instruments, PathFiles and K-files to maintain canal anatomy during glide path preparation using X-ray computed micro-tomography (micro-CT). Forty-five extracted maxillary first permanent molars were selected. Mesio-buccal canals were randomly assigned (n = 15) to manual K-file, PathFile or ProGlider groups for glide path preparation. Irrigation was achieved with 5% NaOCl and 10% EDTA. After glide path preparation, each canal was shaped with ProTaper Next X1 and X2 to working length. Specimens were scanned (isotropic voxel size 9.1 μm) for matching volumes and surface areas and post-treatment analyses. Canal volume, surface area, centroid shift, canal geometry variation through ratio of diameter ratios and ratio of cross-sectional areas were assessed in the apical and coronal levels and at the point of maximum canal curvature. One-way factorial anovas were used to evaluate the significance of instrument in the various canal regions. Post-glide path analysis revealed that instrument factor was significant at the apical level for both the ratio of diameter ratios and the ratio of cross-sectional areas (P < 0.001), with an improved maintenance of root canal geometry by ProGlider and PathFile. At the coronal level and point of maximum canal curvature, ProGlider demonstrated a tendency to pre-flare the root canal compared with K-file and PathFile. PathFile and ProGlider demonstrated a significantly lower centroid shift compared with K-file at the apical level (P = 0.023). Post-shaping analysis demonstrated a more centred preparation of ProGlider, compared with PathFile and K-files, with no significant differences for other parameters. Use of ProGlider instruments led to less canal transportation than PathFiles and K-files. © 2016 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Investigations into in situ Enterococcus faecalis biofilm removal by passive and active sodium hypochlorite irrigation delivered into the lateral canal of a simulated root canal model.

PubMed

Mohmmed, S A; Vianna, M E; Penny, M R; Hilton, S T; Mordan, N J; Knowles, J C

2018-06-01

To investigate in situ Enterococcus faecalis biofilm removal from the lateral canal of a simulated root canal system using passive or active irrigation protocols. Root canal models (n = 43) were manufactured from transparent resin materials using 3D printing. Each canal was created with an 18 mm length, apical size 30, a .06 taper and a lateral canal of 3 mm length, with 0.3 mm diameter. Biofilms were grown in the lateral canal and apical 3 mm of the main canal for 10 days. Three models from each group were examined for residual biofilm using SEM. The other forty models were divided into four groups (n = 10). The models were observed under a fluorescence microscope. Following 60 s of 9 mL of 2.5% NaOCl irrigation using syringe and needle, the irrigant was either left stagnant in the canal or activated using gutta-percha, sonic or ultrasonic methods for 30 s. Images were then captured every second using an external camera. The residual biofilm percentages were measured using image analysis software. The data were analysed using generalized linear mixed models. A significance level of 0.05 was used throughout. The greatest level of biofilm removal was obtained with ultrasonic agitation (66.76%) followed by sonic (45.49%), manual agitation (43.97%) and passive irrigation groups (38.67%), respectively. The differences were significant between the residual biofilm in the passive irrigation and both sonic and ultrasonic groups (P = 0.001). Agitation resulted in better penetration of 2.5% NaOCl into the lateral canal of an artificial root canal model. Ultrasonic agitation of NaOCl improved the removal of biofilm. © 2017 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Anatomical and morphological study of the subcoracoacromial canal.

PubMed

Le Reun, O; Lebhar, J; Mateos, F; Voisin, J L; Thomazeau, H; Ropars, M

2016-12-01

Many clinical anatomy studies have looked into how variations in the acromion, coracoacromial ligament (CAL) and subacromial space are associated with rotator cuff injuries. However, no study up to now had defined anatomically the fibro-osseous canal that confines the supraspinatus muscle in the subcoracoacromial space. Through an anatomical study of the scapula, we defined the bone-related parameters of this canal and its anatomical variations. This study on dry bones involved 71 scapulas. With standardised photographs in two orthogonal views (superior and lateral), the surface area of the subcoracoacromial canal and the anatomical parameters making up this canal were defined and measured using image analysis software. The primary analysis evaluated the anatomical parameters of the canal as a function of three canal surface area groups; the secondary analysis looked into how variations in the canal surface area were related to the type of acromion according to the Bigliani classification. Relative to glenoid width, the group with a large canal surface area (L) had significantly less lateral overhang of the acromion than the group with a small canal surface area (S), with ratios of 0.41±0.23 and 0.58±0.3, respectively (P=0.04). The mean length of the CAL was 46±8mm in the L group and 39±9mm in the S group (P=0.003). The coracoacromial arch angle was 38°±11° in the L group and 34°±9° in the S group; the canal surface area was smaller in specimens with a smaller coracoacromial arch angle (P=0.20). Apart from acromial morphology, there could be innate anatomical features of the scapula that predispose people to extrinsic lesions to the supraspinatus tendon (lateral overhang, coracoacromial arch angle) by reducing the subcoracoacromial canal's surface area. Anatomical descriptive study. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Influence of a glide path on apical extrusion of debris during canal preparation using single-file systems in curved canals.

PubMed

Topçuoğlu, H S; Düzgün, S; Akpek, F; Topçuoğlu, G; Aktı, A

2016-06-01

To evaluate the effect of a glide path on the amount of apically extruded debris during canal preparation using single-file systems in curved canals. Ninety extracted mandibular molar teeth were randomly assigned to six groups (n = 15 for each group) for canal instrumentation. Endodontic access cavities were prepared in each tooth. In three of the six groups, a glide path was not created whereas a glide path was created using PathFile instruments on the mesial canals of all teeth in the remaining three groups. The mesial canals of the teeth were then instrumented with the following single-file instrument systems: WaveOne, Reciproc and OneShape. Debris extruded apically during instrumentation was collected into pre-weighed Eppendorf tubes. The tubes were then stored in an incubator at 70 °C for 5 days. The weight of the dry extruded debris was established by subtracting the pre-instrumentation and post-instrumentation weight of the Eppendorf tubes for each group. The data obtained were analysed using one-way analysis of variance (anova) and Tukey's post hoc tests. The OneShape file was associated with less debris extrusion than the Reciproc and WaveOne files when canal instrumentation was performed without a glide path (P < 0.05). However, no significant difference was found between the Reciproc and WaveOne files (P > 0.05). There was no significant difference amongst the OneShape, Reciproc and WaveOne files when a glide path was created before canal preparation in curved root canals (P > 0.05). All systems extruded significantly less debris in groups with a glide path than in groups without a glide path (P < 0.05). All instruments were associated with apical extrusion of debris. Creating a glide path prior to canal instrumentation reduced the amount of apically extruded debris in curved canals. © 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Analysis of the internal anatomy of maxillary first molars by using different methods.

PubMed

Baratto Filho, Flares; Zaitter, Suellen; Haragushiku, Gisele Aihara; de Campos, Edson Alves; Abuabara, Allan; Correr, Gisele Maria

2009-03-01

The success of endodontic treatment depends on the identification of all root canals so that they can be cleaned, shaped, and obturated. This study investigated internal morphology of maxillary first molars by 3 different methods: ex vivo, clinical, and cone beam computed tomography (CBCT) analysis. In all these different methods, the number of additional root canals and their locations, the number of foramina, and the frequency of canals that could or could not be negotiated were recorded. In the ex vivo study, 140 extracted maxillary first molars were evaluated. After canals were accessed and detected by using an operating microscope, the teeth with significant anatomic variances were cleared. In the clinical analysis, the records of 291 patients who had undergone endodontic treatment in a dental school during a 2-year period were used. In the CBCT analysis, 54 maxillary first molars were evaluated. The ex vivo assessment results showed a fourth canal frequency in 67.14% of the teeth, besides a tooth with 7 root canals (0.72%). Additional root canals were located in the mesiobuccal root in 92.85% of the teeth (17.35% could not be negotiated), and when they were present, 65.30% exhibited 1 foramen. Clinical assessment showed that 53.26%, 0.35%, and 0.35% of the teeth exhibited 4, 5, and 6 root canals, respectively. Additional root canals were located in this assessment in mesiobuccal root in 95.63% (27.50% could not be negotiated), and when they were present, 59.38% exhibited 1 foramen. CBCT results showed 2, 4, and 5 root canals in 1.85%, 37.05%, and 1.85% of the teeth, respectively. When present, additional canals showed 1 foramen in 90.90% of the teeth studied. This study demonstrated that operating microscope and CBCT have been important for locating and identifying root canals, and CBCT can be used as a good method for initial identification of maxillary first molar internal morphology.

One- versus two-visit endodontic treatment of teeth with apical periodontitis: a histobacteriologic study.

PubMed

Vera, Jorge; Siqueira, José F; Ricucci, Domenico; Loghin, Simona; Fernández, Nancy; Flores, Belina; Cruz, Alvaro G

2012-08-01

This study analyzed the in vivo microbiological status of the root canal systems of mesial roots of mandibular molars with primary apical periodontitis after 1- or 2-visit endodontic treatment. Mesial root canals were instrumented by using either a combination of K3 and LightSpeed instruments (mesiobuccal canals) or the ProTaper system (mesiolingual canals), with 5% NaOCl irrigation. Patency files were used. Smear layer was removed, and a final rinse with 5 mL of 2% chlorhexidine was performed. In the 2-visit group (7 roots, 14 canals), canals were medicated with calcium hydroxide for 1 week and then obturated by using the continuous wave of compaction technique. In the 1-visit group (6 roots, 12 canals), canals were immediately obturated after chemomechanical procedures. Teeth were extracted 1 week after root canal instrumentation and processed for histobacteriologic analysis. In the 1-visit group, no case was completely free of bacteria; residual bacteria occurred in the main root canal (5 of 6 cases), isthmus (5 of 6), apical ramifications (4 of 6), and dentinal tubules (5 of 6). In the 2-visit group, 2 cases were rendered bacteria-free; residual bacteria were found in the main canal only in 2 cases (none of them with persistent dentinal tubule infection), in the isthmus (4 of 7 cases), and in ramifications (2 of 7). The 2 instrumentation techniques performed similarly. When filling material was observed in ramifications, it was usually intermixed with necrotic tissue, debris, and bacteria. The 2-visit protocol by using an interappointment medication with calcium hydroxide resulted in improved microbiological status of the root canal system when compared with the 1-visit protocol. Residual bacteria were more frequent and abundant in ramifications, isthmuses, and dentinal tubules when root canals were treated without an interappointment medication. Apical ramifications and isthmuses were never completely filled. The use of an antibacterial interappointment agent is necessary to maximize bacterial reduction before filling. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

The efficiency of different irrigation solutions and techniques for the removal of triple antibiotic paste from simulated immature root canals.

PubMed

Ustun, Y; Düzgün, S; Aslan, T; Aktı, A

2018-03-01

The purpose of this study was to evaluate the efficiencies of different irrigation protocols in the removal of triple antibiotic paste (TAP) from root canals. A total of 127 extracted human maxillary incisor teeth were prepared. Then, root-end resection of 3 mm was accomplished to simulate immature apex model. The root canals were filled with TAP, after 21 days, randomly divided into nine groups according to irrigation systems and solutions (n = 13). Conventional irrigation (CI) groups - Group 1: Root canal irrigation was performed with CI by Peracetic acid (PAA) solution, Group 2: Root canal irrigation was performed with CI by etidronic acid 1-hydroxyethylidene-1, 1-bisphosphonate (HEBP) + sodium hypochlorite (NaOCl) solution, Group 3: Root canal irrigation was performed with CI by ethylenediaminetetraacetic acid (EDTA)/NaOCl solutions. Vibringe system groups - Group 4: Root canal irrigation was performed with Vibringe system by PAA solution, Group 5: Root canal irrigation was performed with Vibringe system by HEBP + NaOCl solution, Group 6: Root canal irrigation was performed with Vibringe system by EDTA/NaOCl solution. EndoVac system groups - Group 7: Root canal irrigation was performed with EndoVac system by PAA solution, Group 8: Root canal irrigation was performed with EndoVac system by HEBP + NaOCl solution, Group 9: Root canal irrigation was performed with EndoVac system by EDTA/NaOCl solution. Control Group: (n = 0). Samples were sectioned vertically, and the amount of remaining medicament was scored for each root half and data were statistically analyzed. Among the irrigation systems, CI groups showed the highest scores at both apical and coronal parts (P < 0.05). In comparisons among the solutions, at the apical part, PAA groups showed the highest scores (P < 0.05). At the coronal part, EDTA + NaOCl groups showed the lowest score values (P < 0.05). The use of irrigation systems improved the removal of TAP from the simulated immature root canals. Also, as an irrigation solution EDTA gives more promising results than PAA and HEBP solutions.

The effect of a manual instrumentation technique on five types of premolar root canal geometry assessed by microcomputed tomography and three-dimensional reconstruction

PubMed Central

2011-01-01

Background Together with diagnosis and treatment planning, a good knowledge of the root canal system and its frequent variations is a necessity for successful root canal therapy. The selection of instrumentation techniques for variants in internal anatomy of teeth has significant effects on the shaping ability and cleaning effectiveness. The aim of this study was to reveal the differences made by including variations in the internal anatomy of premolars into the study protocol for investigation of a single instrumentation technique (hand ProTaper instruments) assessed by microcomputed tomography and three-dimensional reconstruction. Methods Five single-root premolars, whose root canal systems were classified into one of five types, were scanned with micro-CT before and after preparation with a hand ProTaper instrument. Instrumentation characteristics were measured quantitatively in 3-D using a customized application framework based on MeVisLab. Numeric values were obtained for canal surface area, volume, volume changes, percentage of untouched surface, dentin wall thickness, and the thickness of dentin removed. Preparation errors were also evaluated using a color-coded reconstruction. Results Canal volumes and surface areas were increased after instrumentation. Prepared canals of all five types were straightened, with transportation toward the inner aspects of S-shaped or multiple curves. However, a ledge was formed at the apical third curve of the type II canal system and a wide range in the percentage of unchanged canal surfaces (27.4-83.0%) was recorded. The dentin walls were more than 0.3 mm thick except in a 1 mm zone from the apical surface and the hazardous area of the type II canal system after preparation with an F3 instrument. Conclusions The 3-D color-coded images showed different morphological changes in the five types of root canal systems shaped with the same hand instrumentation technique. Premolars are among the most complex teeth for root canal treatment and instrumentation techniques for the root canal systems of premolars should be selected individually depending on the 3-D canal configuration of each tooth. Further study is needed to demonstrate the differences made by including variations in the internal anatomy of teeth into the study protocol of clinical RCT for identifying the best preparation technique. PMID:21676233

Effect of photodynamic therapy (PDT) on Enterococcus faecalis biofilm in experimental primary and secondary endodontic infections.

PubMed

Tennert, Christian; Feldmann, Katharina; Haamann, Edwina; Al-Ahmad, Ali; Follo, Marie; Wrbas, Karl-Thomas; Hellwig, Elmar; Altenburger, Markus J

2014-11-04

To determine the antibacterial effect of photodynamic Therapy on Enterococcus faecalis (E. faecalis) biofilms in experimentally infected human root canals in primary infections and endodontic retreatments. One hundred and sixty single-rooted extracted teeth with one root canal were prepared using ProTaper instruments. Seventy specimens were left without root canal filling and autoclaved. The root canals of another 70 specimens were filled with Thermafil and AH Plus and the root canal fillings were removed after 24 hours using ProTaper D files and plasma sterilized. The specimens were infected with a clinical isolate of E. faecalis for 72 hours. Samples were taken using sterile paper points to determine the presence of E. faecalis in the root canals. The specimens were randomly divided into groups according to their treatment with 20 teeth each and a control. In the PDT group the teeth were treated using PDT, consisting of the photosensitizer toluidine blue and the PDT light source at 635 nm. In the NaOCl (sodium hypochlorite) group the root canals were rinsed with 10 mL of 3% NaOCl. In the NaOCl-PDT group the root canals were rinsed with 10 mL of 3% of sodium hypochlorite and then treated with PDT. Samples were taken after treatments using sterile paper points. Additionally, remaining root canal filling material was recovered from the root canal walls. Survival fractions of the samples were calculated by counting colony-forming units. A one-way analysis of variance (ANOVA) was applied to the data to assess the effect of different treatment techniques. Antimicrobial treatment of root canals caused a significant reduction of bacterial load in all groups. NaOCl irrigation eliminated E. faecalis most effectively. PDT alone was less effective compared to NaOCl irrigation and the combination of NaOCl irrigation and PDT. CFU levels recovered from the filling material after NaOCl irrigation of the root canals were 10fold higher compared to PDT and the combination of NaOCl irrigation and PDT. Photodynamic therapy killed E. faecalis in experimental primary endodontic infections and retreated human root canals. PDT is an effective supplement in root canal disinfection, especially in endodontic retreatments.

CBVT analysis of canal configuration of the mesio-buccal root of maxillary first permanent molar teeth: An in vitro study.

PubMed

Shenoi, R Pratima; Ghule, Hrishikesh M

2012-07-01

For successful endodontic treatment, it's imperative to locate and obturate all root canals. As concluded by Ingle, the major cause for failure of root canal therapy is in ability to recognize all theexisting canals and subsequent failure in their obturation. To analyze the canal configuration of the mesio-buccal root of maxillary first permanent molar teeth. A total of 30 recently extracted human permanent maxillary first molars were collected and stored in a container with 5% Sodium Chloride solution for four days. Teeth with open apices, external resorption, improperly formed roots and teeth with previous restorations were excluded. Using the dental modeling wax, teeth were arranged in a 'U' shaped arch with roots embedded inside the wax and occlusal surface remaining free. 10 teeth were arranged in each arch and three such sample plates were prepared. Flat surface of the base encasing enabled the plate to be mounted on flat plastic bite plate. With bite plate roughly centered in the focal trough area Axial, Coronal and Sagittal section Cone-Beam Computed Tomography (CBCT) images were taken with Kodak 9000 Extra-oral Imaging System. Images displayed on a monitor were inspected by two endodontists using Kodak Dental Imaging Software 3D Module V2.2. When the data was observed, it was found that 24 teeth out of total 30 teeth examined showed some variation (i.e. possible additional canal) along the length of the mesio-buccal root canal. Out of these 24 teeth, 13 showed presence of additional canal at coronal third, 7 showed presence of additional canal at middle third and four showed presence of additional canal in apical third level. Percentage analysis was done as there was no group comparison to be done. Cone-Beam Volumetric Tomography (CBVT) evaluation positively identified the variations in mesio-buccal canal in 80% of samples. Out of these, 54.16% were in coronal 3(rd), 29.16% in middle 3(rd) and 16.66% were in apical 3(rd). Within the limitations of this study, it can be concluded that- (1) more than half of maxillary first molars have four canals and (2) most of the additional canals were located in the MBR and CBVT is a good diagnostic tool to help diagnose these additional canals. Further investigations using larger sample sizes would be helpful.

Early irrigation systems in southeastern Arizona: the ostracode perspective

NASA Astrophysics Data System (ADS)

Palacios-Fest, Manuel R.; Mabry, Jonathan B.; Nials, Fred; Holmlund, James P.; Miksa, Elizabeth; Davis, Owen K.

2001-10-01

For the first time, the Early Agricultural Period (1200 BC-150 AD) canal irrigation in the Santa Cruz River Valley, southeastern Arizona, is documented through ostracode paleoecology. Interpretations based on ostracode paleoecology and taphonomy are supported by anthropological, sedimentological, geomorphological, and palynological information, and were used to determine the environmental history of the northern Tucson Basin during the time span represented by the sequence of canals at Las Capas (site AZ AA:12:753 ASM). We also attempt to elucidate based on archaeological artifacts if the Hohokam or a previous civilization built the canals. Between 3000 and 2400 radiocarbon years BP, at least three episodes of canal operation are defined by ostracode assemblages and pollen records. Modern (mid-late 20th century) canals supported no ostracodes, probably because of temporally brief canal operation from local wells. Three stages of water management are well defined during prehistoric canal operation. Ostracode faunal associations indicate that prehistoric peoples first operated their irrigation systems in a simple, 'opportunistic' mode (diversion of ephemeral flows following storms), and later in a complex, 'functional' mode (carefully timed diversions of perennial flows). The geomorphological reconstruction indicates that these canals had a minimum length of 1.1 km, and were possibly twice as long. The hydraulic reconstruction of these canals suggests that they had similar gradients (0.05-0.1%) to later prehistoric canals in the same valley. Discharges were also respectable. When flowing at bank-full, the largest canal provided an acre-foot of water in about 2.3 h; when flowing half-full (probably a more realistic assumption), it produced an acre-foot of water in about 8.6 h. Palynological records of the oldest canals (here identified as Features 3 and 4; 3000-2500 years BP) indicate they were used temporarily, since riparian vegetation did not grow consistently in the area. The presence of maize (Zea sp.) pollen in the canals confirms agricultural use of the canal water. However, a low percentage of maize and weed pollen suggests limited agricultural activity in this location, consistent with the lithostratigraphy, granulometry, and ostracode paleoecology. Agricultural fields were probably located downstream of this site. Ostracode assemblages show patterns consistent with the opportunistic or functional water control method, hence proving their value as indicators of human activity and environmental change. The transition from opportunistic to functional modes of canal operation indicates the increasing complexity of the social structure in the Santa Cruz Valley during the San Pedro Phase (1200-800 BC) of the Early Agricultural Period.

Effects of selective breeding for high voluntary wheel-running behavior on femoral nutrient canal size and abundance in house mice.

PubMed

Schwartz, Nicolas L; Patel, Biren A; Garland, Theodore; Horner, Angela M

2018-05-31

Bone modeling and remodeling are aerobic processes that entail relatively high oxygen demands. Long bones receive oxygenated blood from nutrient arteries, epiphyseal-metaphyseal arteries, and periosteal arteries, with the nutrient artery supplying the bulk of total blood volume in mammals (~ 50-70%). Estimates of blood flow into these bones can be made from the dimensions of the nutrient canal, through which nutrient arteries pass. Unfortunately, measuring these canal dimensions non-invasively (i.e. without physical sectioning) is difficult, and thus researchers have relied on more readily visible skeletal proxies. Specifically, the size of the nutrient artery has been estimated from dimensions (e.g. minimum diameters) of the periosteal (external) opening of the nutrient canal. This approach has also been utilized by some comparative morphologists and paleontologists, as the opening of a nutrient canal is present long after the vascular soft tissue has degenerated. The literature on nutrient arteries and canals is sparse, with most studies consisting of anatomical descriptions from surgical proceedings, and only a few investigating the links between nutrient canal morphology and physiology or behavior. The primary objective of this study was to evaluate femur nutrient canal morphology in mice with known physiological and behavioral differences; specifically, mice from an artificial selection experiment for high voluntary wheel-running behavior. Mice from four replicate high runner (HR) lines are known to differ from four non-selected control (C) lines in both locomotor and metabolic activity, with HR mice having increased voluntary wheel-running behavior and maximal aerobic capacity (VO 2 max) during forced treadmill exercise. Femora from adult mice (average age 7.5 months) of the 11th generation of this selection experiment were μCT-scanned and three-dimensional virtual reconstructions of nutrient canals were measured for minimum cross-sectional area as a skeletal proxy of blood flow. Gross observations revealed that nutrient canals varied far more in number and shape than prior descriptions would indicate, regardless of sex or genetic background (i.e. HR vs. C lines). Canals adopted non-linear shapes and paths as they traversed from the periosteal to endosteal borders through the cortex, occasionally even branching within the cortical bone. Additionally, mice from both HR and C lines averaged more than four nutrient canals per femur, in contrast to the one to two nutrient canals described for femora from rats, pigs, and humans in prior literature. Mice from HR lines had significantly larger total nutrient canal area than C lines, which was the result not of an increase in the number of nutrient canals, but rather an increase in their average cross-section size. This study demonstrates that mice with an evolutionary history of increased locomotor activity and maximal aerobic metabolic rate have a concomitant increase in the size of their femoral nutrient canals. Although the primary determinant of nutrient canal size is currently not well understood, the present results bolster use of nutrient canal size as a skeletal indicator of aerobically supported levels of physical activity in comparative studies. © 2018 Anatomical Society.

Quantifying canal leakage rates using a mass-balance approach and heat-based hydraulic conductivity estimates in selected irrigation canals, western Nebraska, 2007 through 2009

USGS Publications Warehouse

Hobza, Christopher M.; Andersen, Michael J.

2010-01-01

The water supply in areas of the North Platte River Basin in the Nebraska Panhandle has been designated as fully appropriated or overappropriated by the Nebraska Department of Natural Resources (NDNR). Enacted legislation (Legislative Bill 962) requires the North Platte Natural Resources District (NPNRD) and the NDNR to develop an Integrated Management Plan (IMP) to balance groundwater and surface-water supply and demand in the NPNRD. A clear understanding of the groundwater and surface-water systems is critical for the development of a successful IMP. The primary source of groundwater recharge in parts of the NPNRD is from irrigation canal leakage. Because canal leakage constitutes a large part of the hydrologic budget, spatially distributing canal leakage to the groundwater system is important to any management strategy. Surface geophysical data collected along selected reaches of irrigation canals has allowed for the spatial distribution of leakage on a relative basis; however, the actual magnitude of leakage remains poorly defined. To address this need, the U.S. Geological Survey, in cooperation with the NPNRD, established streamflow-gaging stations at upstream and downstream ends from two selected canal reaches to allow a mass-balance approach to be used to calculate daily leakage rates. Water-level and sediment temperature data were collected and simulated at three temperature monitoring sites to allow the use of heat as a tracer to estimate the hydraulic conductivity of canal bed sediment. Canal-leakage rates were estimated by applying Darcy's Law to modeled vertical hydraulic conductivity and either the estimated or measured hydraulic gradient. This approach will improve the understanding of the spatial and temporal variability of canal leakage in varying geologic settings identified in capacitively coupled resistivity surveys. The high-leakage potential study reach of the Tri-State Canal had two streamflow-gaging stations and two temperature monitoring sites along its length. Calculated leakage rates from the mass-balance approach varied from year to year and were generally dependent on local climatic conditions, and the timing and magnitude of the initial seasonal diversion into the Tri-State Canal. Leakage rates ranged from 0.98 meter per day (m/d) on June 22, 2007, to about to 0 m/d during July 2009. Drier conditions generally resulted in higher leakage rates because of reduced flow from Spottedtail Creek, lower groundwater levels near Spottedtail Creek, and no unmeasured flow entering the reach. Of the three years studied (2007-09), 2007 was the driest, and therefore had the highest canal leakage rates. The moderately low leakage potential study reach of Interstate Canal had two streamflow-gaging stations and one temperature monitoring site along its length. Excluding the leakage calculations from early May 2007, leakage rates ranged from 0.08 to 0.7 m/d. Less variability in leakage from year to year indicates that climatic conditions may have less of an effect for Interstate Canal compared to Tri-State Canal. This may be because Interstate Canal was cut into the northern edge of the North Platte alluvial valley and consequently the canal bed is well above the local groundwater table resulting in a constant (1 meter per meter [m/m]) hydraulic gradient. Interstate Canal also does not receive any captured flow that can vary substantially year to year. Two temperature monitoring sites were installed within the high-leakage potential reach of Tri-State Canal. Site TCTEMP1 was established in 2007 where the water table was well below the canal bed surface. The vertical hydraulic conductivity of the poorly sorted sand and gravel beneath site TCTEMP1 was estimated using a calibrated one-dimensional VS2DH model. Using a trial-and-error approach, the best-fit vertical hydraulic conductivity for the site TCTEMP1 model domain was 1.1 m/d. Site TCTEMP2 was established at the mouth of Spottedtail Creek where a shallow

Hydrology and environmental aspects of Erie Canal (1817-99)

USGS Publications Warehouse

Langbein, Walter Basil

1976-01-01

As the first major water project in the United States, the old Erie Canal provides an example of the hydrological and environmental consequences of water development. The available record shows that the project aroused environmental fears that the canal might be impaired by the adverse hydrologic effects of land development induced by the canal. Water requirements proved greater than anticipated, and problems of floods and hydraulic inefficiencies beset navigation throughout its history. The Erie Canal proved the practicality of major hydraulic works to the extent that operations and maintenance could cope with the burdens of deficiencies in design. The weight of prior experience that upland streams, such as the Potomac and Mohawk Rivers, had proved unsatisfactory for dependable navigation, led to a decision to build an independent canal which freed the location from the constraints of river channels and made possible a cross-country water route directly to Lake Erie. The decision on dimensioning the canal prism--chiefly width and depth-involved balance between a fear of building too small and thus not achieving the economic potentials, and a fear of building too expensively. The constraints proved effective, and for the first part of its history the revenues collected were sufficient to repay all costs. So great was the economic advantage of the canal that the rising trend in traffic soon induced an enlargement of the canal cross section, based upon a new but riskier objective-build as large as the projected trend in toll revenues would finance. The increased revenues did not materialize. Water supplies were a primary concern for both the planners and the operators of the canal. Water required for lockage, although the most obvious to the planners, proved to be a relatively minor item compared with the amounts of water that were required to compensate for leakage through the bed and banks of the canal. Leakage amounted to about 8 inches of depth per day. The total quantities of water taken into the canal made it the largest hydraulic undertaking of the 19th century in the United States. The diversion of water to factories that were attracted to the canal as a source of hydraulic power added to the water requirements. Although new feeders and reservoirs to extend the supply were built throughout the canal's history, these efforts to cope with water shortages were never fully successful. The primary cause of the persistent deficiencies in supply was the method used to estimate the available flow of the. streams during extended dry spells. Ad hoc, spot measurements of streamflow consistently led to overestimation of the dependable supply. There was a persistent hydraulic problem as well. The cross section of the canal, especially when obstructed by many barges, was inadequate to convey the large volumes of water needed to maintain navigable depths over the long distances between feeders. The major flood problem was caused by cross-drainage--the small creeks that crossed under the canal in culverts. Washout of culverts was a never-ending source of sporadic disruption of traffic of 1 or 2 weeks duration. Repairs and replacements could not cope with the problem created by deficiency in information ,about the flood potentials of 'the small streams. A fortunate occurrence of severe floods in 1817 at the start of canal construction provided such clear and persuasive evidence of the flood potentials of the, Mohawk River, which the canal followed for about 110 miles, so as to compel putting the canal at a high level in difficult terrain. Environmental anxieties, broached early in the planning of the canal, centered on the potentially adverse effects of land development and deforestation on floods, water supply, and erosion. The flow of rivers did not decrease as originally feared. Land use did not increase the intensity of flooding and so endanger the canal. Viewed first as a conveyor of pure water from Lake

151. Photocopy of drawing (taken from Twin Falls Canal Company ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

151. Photocopy of drawing (taken from Twin Falls Canal Company Surveyor's Transit Book #363, Page 20). SURVEY PRINT SHOWING POINT SPILLWAY AND FIELD NOTES, TWIN FALLS COUNTY NORTHWEST OF MURTAUGH, IDAHO. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

155. Photocopy of transit book (taken from Twin Falls Canal ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

155. Photocopy of transit book (taken from Twin Falls Canal Company Surveyor's Transit Book #405T, Page 1, #46 Division One). STATEMENT RE: SURVEY ALIGNMENT 3/03, TWIN FALLS COUNTY, MILNER, IDAHO. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

24. VIEW SHOWING WASTE GATES ON GRAND CANAL AT JUNCTION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. VIEW SHOWING WASTE GATES ON GRAND CANAL AT JUNCTION WITH OLD CROSSCUT NE/4, Sec. 7, TIN, R4E; LOOKING WEST. OLD CROSSCUT CANAL ENTERS FROM RIGHT. WASTE GATE ON LEFT EMPTIES INTO SALT RIVER BED Photographer: Kevin Kreisel-Coons, May 1990 - Grand Canal, North side of Salt River, Tempe, Maricopa County, AZ

33 CFR 207.640 - Sacramento Deep Water Ship Channel Barge Lock and Approach Canals; use, administration, and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Engineer District, Sacramento, Federal and Courts Building, 650 Capitol Avenue, Sacramento, California. His... green light is flashing, lock is ready for entrance, the vessel may proceed with caution into the lock... or canal. Vessel may enter canal with caution. When the green light is on, vessel may enter canal and...

192. Photocopy of drawing, Twin Falls Canal Company, date unknown. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

192. Photocopy of drawing, Twin Falls Canal Company, date unknown. TOPOGRAPHICAL MAP (DAM DRAWN IN), MILNER SITE, TWIN FALLS COUNTY, MILNER, IDAHO; RIGHT SIDE OF MAP (LEFT ON ID-15-183). - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

178. Photocopy of Photograph, Twin Falls Canal Company. C. R. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

178. Photocopy of Photograph, Twin Falls Canal Company. C. R. Savage, Photographer, March, 1905. FIRST FULL WATER OVER MILNER DAM, TWIN FALLS COUNTY, MILNER, IDAHO; SOUTHWEST VIEW OF SPILLWAY GATES. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

77 FR 15749 - Twin Lakes Canal Company; Notice of Preliminary Permit Application Accepted for Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-16

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 12486-007] Twin Lakes Canal... Intervene, and Competing Applications On March 8, 2012, Twin Lakes Canal Company filed an application for a.... Applicant Contact: Mr. Clair Boesen, Twin Lakes Canal Company, P.O. Box 247, 2 North State Street, Preston...

Panama Canal expansion : the effect of imports and exports diverted from California seaports on the Port of New York and New Jersey : final report.

DOT National Transportation Integrated Search

2016-12-01

In 2006, the Panama Canal Authority decided to expand the Canal by investing more than $5 billion to accommodate bigger vessels than now to traverse the current facility. Along with the Nicaragua Canal construction that is optimally expected to finis...

33 CFR 207.441 - St. Marys Falls Canal and Locks, Mich.; security.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false St. Marys Falls Canal and Locks... OF THE ARMY, DEPARTMENT OF DEFENSE NAVIGATION REGULATIONS § 207.441 St. Marys Falls Canal and Locks... the conduct of crew and passengers while transiting St. Marys Falls Canal and Locks and for strict...

6. View of Dundee Textile Company Mill looking northeast; Building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. View of Dundee Textile Company Mill looking northeast; Building No. 2 at left, Building No. 1 at right, Dundee Canal in foreground - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

9. View looking southeast; Dundee Textile Company Mill at left, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. View looking southeast; Dundee Textile Company Mill at left, Dundee Canal at right, Whippany Paper Board Company (outside of District) at center distance - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

33 CFR 207.440 - St. Marys Falls Canal and Locks, Mich.; use, administration, and navigation.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false St. Marys Falls Canal and Locks.... Marys Falls Canal and Locks, Mich.; use, administration, and navigation. (a) The use, administration... by radiotelephone to the Corps of Engineers Chief Lockmaster at St. Marys Falls Canal dispatch tower...

33 CFR 207.441 - St. Marys Falls Canal and Locks, Mich.; security.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false St. Marys Falls Canal and Locks... OF THE ARMY, DEPARTMENT OF DEFENSE NAVIGATION REGULATIONS § 207.441 St. Marys Falls Canal and Locks... the conduct of crew and passengers while transiting St. Marys Falls Canal and Locks and for strict...

33 CFR 207.440 - St. Marys Falls Canal and Locks, Mich.; use, administration, and navigation.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false St. Marys Falls Canal and Locks.... Marys Falls Canal and Locks, Mich.; use, administration, and navigation. (a) The use, administration... by radiotelephone to the Corps of Engineers Chief Lockmaster at St. Marys Falls Canal dispatch tower...

33 CFR 207.441 - St. Marys Falls Canal and Locks, Mich.; security.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false St. Marys Falls Canal and Locks... OF THE ARMY, DEPARTMENT OF DEFENSE NAVIGATION REGULATIONS § 207.441 St. Marys Falls Canal and Locks... the conduct of crew and passengers while transiting St. Marys Falls Canal and Locks and for strict...

33 CFR 207.440 - St. Marys Falls Canal and Locks, Mich.; use, administration, and navigation.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false St. Marys Falls Canal and Locks.... Marys Falls Canal and Locks, Mich.; use, administration, and navigation. (a) The use, administration... by radiotelephone to the Corps of Engineers Chief Lockmaster at St. Marys Falls Canal dispatch tower...

33 CFR 207.441 - St. Marys Falls Canal and Locks, Mich.; security.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false St. Marys Falls Canal and Locks... OF THE ARMY, DEPARTMENT OF DEFENSE NAVIGATION REGULATIONS § 207.441 St. Marys Falls Canal and Locks... the conduct of crew and passengers while transiting St. Marys Falls Canal and Locks and for strict...

33 CFR 207.441 - St. Marys Falls Canal and Locks, Mich.; security.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false St. Marys Falls Canal and Locks... OF THE ARMY, DEPARTMENT OF DEFENSE NAVIGATION REGULATIONS § 207.441 St. Marys Falls Canal and Locks... the conduct of crew and passengers while transiting St. Marys Falls Canal and Locks and for strict...

31. MAIN CANAL Photographic copy of historic photo, December ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

31. MAIN CANAL - Photographic copy of historic photo, December 13, 1939 (original print in '1939 Annual Report of the Carlsbad Project,' located at the Carlsbad Irrigation District offices, Carlsbad, New Mexico) photographer unknown 'LINING MAIN CANAL AROUND GYP BEND' - Carlsbad Irrigation District, Main Canal, 4 miles North to 12 miles Southeast of Carlsbad, Carlsbad, Eddy County, NM

33 CFR 117.820 - Atlantic Intracoastal Waterway (Alternate Route), Great Dismal Swamp Canal.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (Alternate Route), Great Dismal Swamp Canal. 117.820 Section 117.820 Navigation and Navigable Waters COAST... North Carolina § 117.820 Atlantic Intracoastal Waterway (Alternate Route), Great Dismal Swamp Canal. The draw of the Great Dismal Swamp Canal Bridge, mile 28.0 at South Mills, NC, shall operate as follows: (a...

33 CFR 117.820 - Atlantic Intracoastal Waterway (Alternate Route), Great Dismal Swamp Canal.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (Alternate Route), Great Dismal Swamp Canal. 117.820 Section 117.820 Navigation and Navigable Waters COAST... North Carolina § 117.820 Atlantic Intracoastal Waterway (Alternate Route), Great Dismal Swamp Canal. The draw of the Great Dismal Swamp Canal Bridge, mile 28.0 at South Mills, NC, shall operate as follows: (a...

33 CFR 117.820 - Atlantic Intracoastal Waterway (Alternate Route), Great Dismal Swamp Canal.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (Alternate Route), Great Dismal Swamp Canal. 117.820 Section 117.820 Navigation and Navigable Waters COAST... North Carolina § 117.820 Atlantic Intracoastal Waterway (Alternate Route), Great Dismal Swamp Canal. The draw of the Great Dismal Swamp Canal Bridge, mile 28.0 at South Mills, NC, shall operate as follows: (a...

33 CFR 117.820 - Atlantic Intracoastal Waterway (Alternate Route), Great Dismal Swamp Canal.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (Alternate Route), Great Dismal Swamp Canal. 117.820 Section 117.820 Navigation and Navigable Waters COAST... North Carolina § 117.820 Atlantic Intracoastal Waterway (Alternate Route), Great Dismal Swamp Canal. The draw of the Great Dismal Swamp Canal Bridge, mile 28.0 at South Mills, NC, shall operate as follows: (a...

33 CFR 117.820 - Atlantic Intracoastal Waterway (Alternate Route), Great Dismal Swamp Canal.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (Alternate Route), Great Dismal Swamp Canal. 117.820 Section 117.820 Navigation and Navigable Waters COAST... North Carolina § 117.820 Atlantic Intracoastal Waterway (Alternate Route), Great Dismal Swamp Canal. The draw of the Great Dismal Swamp Canal Bridge, mile 28.0 at South Mills, NC, shall operate as follows: (a...

77 FR 33307 - Drawbridge Operation Regulation; Lake Washington Ship Canal, Seattle, WA

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-06

... Operation Regulation; Lake Washington Ship Canal, Seattle, WA AGENCY: Coast Guard, DHS. ACTION: Notice of... operating schedule that governs the Montlake Bridge across the Lake Washington Ship Canal, mile 5.2, at... crosses the Lake Washington Ship Canal at mile 5.2 and while in the closed position provides 30 feet of...

76 FR 69131 - Drawbridge Operation Regulation; Lake Washington Ship Canal, Seattle, WA

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-08

... Operation Regulation; Lake Washington Ship Canal, Seattle, WA AGENCY: Coast Guard, DHS. ACTION: Notice of... Bridge across the Lake Washington Ship Canal, mile 0.1, at Seattle, WA. The deviation is necessary to... Bascule Bridge across the Lake Washington Ship Canal, mile 0.1, for vessel traffic for a 14 day period to...

66. 'CANAL BOAT ENROUTE NEAR HACKETTSTOWN' READS THE PHOTOGRAPHS CAPTION. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

66. 'CANAL BOAT ENROUTE NEAR HACKETTSTOWN' READS THE PHOTOGRAPHS CAPTION. BOAT IS QUITE POSSIBLY APPROACHING LOCK 2 EAST FROM THE EAST DUE TO SIMILARITIES BETWEEN THIS AND THE PREVIOUS PHOTOGRAPH (I.E. TREES BORDERING THE LOCK AND THE CANAL TENDER'S HOUSE THAT IS VISIBLE TO RIGHT IN THIS PHOTOGRAPH). - Morris Canal, Phillipsburg, Warren County, NJ

English Canal-Boat Children and the Education Issue 1900-1940: Towards a Concept of Traveller Education?

ERIC Educational Resources Information Center

Bowen, Paul

2001-01-01

Explores the relationship between English canal boat children and compulsory education requirements during 1900-1940. Focuses primarily on the 1900-1914 era and the difficulty of educating canal boat children. Discusses the Living In Committee Report and the Canal Boats Bill. Concludes this era contributed to progress in educating travelling…

35. View of Botany Worsted Mills looking east; building No. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

35. View of Botany Worsted Mills looking east; building No. 24 at left, building No. 35 across center, Dundee Canal and pipe in foreground - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

34. View of Botany Worsted Mills looking north; building No. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

34. View of Botany Worsted Mills looking north; building No. 14 at left, building No. 18 at left background, Dundee Canal at right - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

40. View of Botany Worsted Mills looking southeast; building No. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

40. View of Botany Worsted Mills looking southeast; building No. 39 at right, building No. 38 behind, Dundee Canal at left - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

33. View of Botany Worsted Mills looking northwest; footbridge (No. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

33. View of Botany Worsted Mills looking northwest; footbridge (No. 14A) at center, building No. 18 at left center, Dundee Canal in foreground - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

52. View looking northeast from Monroe Street and Acquackanonk Water ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

52. View looking northeast from Monroe Street and Acquackanonk Water Company site, along covered Dundee Canal prism, toward Dayton Avenue and Botany Worsted Mills - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

30. View looking north from Andrew McLean Company Textile Mill; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

30. View looking north from Andrew McLean Company Textile Mill; Dundee Canal at center, Botany Worsted Mills in background - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

29. View looking north; Botany Worsted Mills building No. 13 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

29. View looking north; Botany Worsted Mills building No. 13 at left and building No. 14 rising behind, Dundee Canal at right - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

31. View looking north from Andrew McLean Company Textile Mill; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

31. View looking north from Andrew McLean Company Textile Mill; Dundee Canal at center, Botany Worsted Mills in background - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

27. View looking east; Botany Worsted Mills building No. 13 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. View looking east; Botany Worsted Mills building No. 13 at left, Dundee Canal at center, Andrew McLean Company Textile Mill at right - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

32. View looking south; Botany Worsted Mills building No. 15 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

32. View looking south; Botany Worsted Mills building No. 15 at right, Dundee Canal at center, Andrew McLean Company Textile Mill at left - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

56. Aerial view looking west; Andrew McLean Company Textile Mill ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

56. Aerial view looking west; Andrew McLean Company Textile Mill at bottom, Dundee Canal at center, Botany Worsted Mills at top - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

Looking east at canal and R. Paul Smith Power Station. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking east at canal and R. Paul Smith Power Station. The dark trestle at right center carried the spur track to coal unloading facilities located in the space now occupied by the coal pile. - Potomac Edison Company, Chesapeake & Ohio Canal Bridge, Spanning C & O Canal South of U.S. 11, Williamsport, Washington County, MD

Endoscopic root canal treatment.

PubMed

Moshonov, Joshua; Michaeli, Eli; Nahlieli, Oded

2009-10-01

To describe an innovative endoscopic technique for root canal treatment. Root canal treatment was performed on 12 patients (15 teeth), using a newly developed endoscope (Sialotechnology), which combines an endoscope, irrigation, and a surgical microinstrument channel. Endoscopic root canal treatment of all 15 teeth was successful with complete resolution of all symptoms (6-month follow-up). The novel endoscope used in this study accurately identified all microstructures and simplified root canal treatment. The endoscope may be considered for use not only for preoperative observation and diagnosis but also for active endodontic treatment.

Anatomic variation of the abducens nerve in a single cadaver dissection: the "petrobasilar canal".

PubMed

Pizzolorusso, Felice; Cirotti, Andrea; Pizzolorusso, Gianfranco

2017-04-01

Anatomic variations of the petrosphenoid ligament, Dorello's canal and the course of the abducens nerve have been extensively described over the past years. In the present report of a single cadaver dissection, we describe an unusual course of the abducens nerve at the level of the petrous bone. The right abducens nerve did not enter Dorello's canal, but ran below the petrous bone through a narrow canal in the petrobasilar suture, which we called the "petrobasilar canal". No anatomic variations of the left abducens nerve were noted.

Water-quality data for canals in eastern Broward County, Florida, 1975-78

USGS Publications Warehouse

Sonntag, W.H.

1980-01-01

Increased urbanization in Broward County has contributed to canals being used as receptacles for urban wastes, sewage effluent, and stormwater runoff. The introduction of contaminants into the canals may affect the water quality. In 1969 the U.S. Geological Survey, in cooperation with the Broward County Pollution Control Board and the South Florida Water Management District, began to monitor the water-quality in canals of eastern Broward County. This report presents selected water-quality data collected from the canals, October 1974 through September 1978, in eastern Broward County. (Kosco-USGS)

Two-rooted maxillary first molars with two canals: a case series.

PubMed

Shakouie, Sahar; Mokhtari, Hadi; Ghasemi, Negin; Gholizadeh, Seddigheh

2013-01-01

Thorough understanding of the anatomic and internal morphology of a root canal system is absolutely essential for the success of endodontic treatment. Since permanent maxillary first molars have shown variation in internal anatomy, morphology, this tooth has been reviewed extensively. Presence of two canals in a two-rooted maxillary first molar has rarely been reported in studies describing tooth and root canal anatomies. In this report, three cases are presented, which involve the root canal treatment of maxillary first molars with fusion of the two buccal roots.

Evaluation of tire reefs for enhancing aquatic communities in concrete-lined canals

USGS Publications Warehouse

Mueller, Gordon; Liston, Charles R.

1994-01-01

Large earthen canals in the arid southwest are being lined with concrete to reduce seepage and conserve limited water supplies. Lining reduces habitat and increases operational velocities (relative to unaltered streams), which are detrimental to aquatic communities. Fish communities that become reestablished in these waterways exhibit lower species diversity, densities, and biomass than they did in the former earthen canals. Placement of low-profile tire reefs in the Coachella Canal, California, and the Hayden-Rhodes Aqueduct, Arizona, reversed these trends. Comparative sampling revealed that invertebrate and fish densities were 3 and 20 times higher, respectively, in reef areas than in typical canal sections without reefs. Tire reefs are recommended as an effective means of enhancing aquatic communities in concrete canals.

Composite resin reinforcement of flared canals using light-transmitting plastic posts.

PubMed

Lui, J L

1994-05-01

Composite resins have been advocated as a reinforcing build-up material for badly damaged endodontically treated teeth with flared canals. However, the control of an autocuring composite resin is difficult because it polymerizes rapidly within the root canal. While the light-curing composite resins are more user friendly, their polymerization can be a problem deep in the root canal. Light-transmitting plastic posts allow the transmission of light into the root canal and enable intraradicular composite resin reconstitution and reinforcement of weakened roots. At the same time, the light-transmitting plastic post forms an optimal post canal in the rehabilitated root and can accurately fit a matching retentive final post. These light-transmitting posts are a useful addition to the dental armamentarium.

Hydrologic conditions in the Florida Panther National Wildlife Refuge, 2006-2007

USGS Publications Warehouse

Reese, Ronald S.

2010-01-01

Much of the surface water that flows into the Florida Panther National Wildlife Refuge (FPNWR) probably exits southward through Fakahatchee Strand as it did prior to development, because culverts and bridges constructed along I-75 allow overland flow to continue southward within the strand. During the dry season and periods of low water levels, however, much of the flow is diverted westward by the I-75 Canal into Merritt Canal at the southwestern corner of the FPNWR. Substantial drainage of groundwater from the FPNWR into the I-75 Canal is indicated by (1) greater surface-water outflows than inflows in the FPNWR, (2) flows that increase to the west along the I-75 Canal, and (3) correlation of rapid groundwater-level declines at sites close to the I-75 Canal with rapid declines in canal surface-water levels due to operation of a control structure in the Merritt Canal. This drainage of groundwater probably occurs through permeable limestone exposed in the I-75 Canal bank below a cap rock layer. Compared to predevelopment conditions, the time currently required to drain ponded water in some areas of the refuge should be less because of accelerated groundwater discharge into the I-75 Canal caused by the lowering of water levels in the canal during the peak of the wet season extending into the early dry season. This drainage probably reduces the duration of the hydroperiod in these wetlands from the wet season into the dry season, possibly reducing or limiting the extent or vitality of wildlife and plant community habitats.

Guided Endodontics: a novel treatment approach for teeth with pulp canal calcification and apical pathology.

PubMed

Krastl, Gabriel; Zehnder, Marc S; Connert, Thomas; Weiger, Roland; Kühl, Sebastian

2016-06-01

To present a new treatment approach for teeth with pulp canal calcification (PCC) which require root canal treatment. A 15-year-old male patient presented with pain of his upper right central incisor. The tooth showed signs of apical periodontitis. Due to PCC, location of the root canal was judged to be difficult and associated with a high risk of perforation. A cone beam computed tomography (CBCT) and an intra-oral surface scan were performed and matched using software for virtual implant planning. After planning the position of the drill for root canal location, a virtual template was designed, and the data were exported as an STL file and sent to a 3D printer for template fabrication. The template was positioned on the anterior maxillary teeth. A specific drill was used to penetrate through the obliterated part of the root canal and obtain minimally invasive access to the apical part. The root canal was accessible at 9 mm distance from the apex. Further root canal preparation was carried out using an endodontic rotary instrumentation system. After an interappointment dressing for 4 weeks, the root canal was filled with vertically condensed gutta-percha using an epoxy sealer. The access cavity was restored with a composite material. After 15 months, the patient was clinically asymptomatic with no pain on percussion. The radiograph showed no apical pathology. The presented guided endodontic approach seems to be a safe, clinically feasible method to locate root canals and prevent root perforation in teeth with PCC. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Microbiological assessment of root canals following use of rotary and manual instruments in primary molars.

PubMed

Subramaniam, Priya; Tabrez, T A; Babu, K L Girish

2013-01-01

To assess the microflora of root canals in primary molars following use of rotary NiTi files and conventional hand NiTi and stainless steel files. This randomized clinical trial consisted of a total of 60 first and second primary molars requiring root canal treatment, who were selected from children aged 5-9 years. Based on type of root canal instrumentation, the teeth were randomly assigned to three groups of twenty teeth each; Group A: Rotary NiTi files, Group B: Hand NiTi files and Group C: Hand stainless steel files. Following administration of local anesthesia, isolation with rubber dam was carried out. For the purpose of instrumentation and sampling, the palatal canal of maxillary molars and the distal canal of mandibular molars were selected. Prior to sampling, the orifices of other canals in these teeth were sealed, so as to prevent any contamination. Instrumentation was carried out in each group using respective instruments along with intermittent saline irrigation. Root canal samples were obtained both before and after instrumentation, using sterile absorbent paper points and transferred to a sterile vial with transport fluid. Serial dilutions were prepared and cultured on suitable agar media. Both aerobic and anaerobic microbial counts were made. Data obtained was subjected to statistical analysis using Wilcoxon signed rank test and one-way Analysis of variance. In all three groups, there was a significant reduction in both aerobic and anaerobic mean microbial count following root canal instrumentation. (p < 0.001). Rotary NiTi files were as efficient as conventional hand instruments in significantly reducing the root canal microflora.

In vitro comparison of passive and continuous ultrasonic irrigation in simulated lateral canals of extracted teeth.

PubMed

Castelo-Baz, Pablo; Martín-Biedma, Benjamín; Cantatore, Giuseppe; Ruíz-Piñón, Manuel; Bahillo, José; Rivas-Mundiña, Berta; Varela-Patiño, Purificación

2012-05-01

Complete endodontic system disinfection requires the removal of vital and necrotic pulp tissue, microorganisms, and toxins. The purpose of this study was to compare the effects of 2 ultrasonic irrigation techniques on the penetration of sodium hypochlorite into the main canal and simulated lateral canals of extracted teeth. Two simulated lateral canals each were created 2, 4, and 6 mm from the working length in 60 single-rooted teeth (6 canals/tooth, n = 360). To resemble the clinical situation, a closed system was created in each tooth. The teeth were randomly assigned to 3 experimental irrigation groups: group 1 (n = 20), positive pressure irrigation (PPI); group 2 (n = 20), passive ultrasonic irrigation (PUI); and group 3 (n = 20), continuous ultrasonic irrigation (CUI). Samples were evaluated by direct observation of still images recorded under a dental operating microscope. To examine irrigating solution penetration, 20% Chinese ink (Sanford Rotring GmbH, Hamburg, Germany) was added to a 5% sodium hypochlorite solution and delivered into the root canals. The results showed a significantly higher (P < .05) penetration of irrigant into the lateral canals in the CUI group. PUI and CUI did not differ significantly in solution penetration into the apical thirds of the main canals. The PPI group showed a significantly lower penetration of sodium hypochlorite into the main and lateral canals compared with the CUI and PUI groups. CUI as a final rinse significantly increased the penetration of irrigating solution into simulated lateral canals. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

The Surgical Challenge of Carotid Artery and Fallopian Canal Dehiscence in Chronic Ear Disease: A Pitfall for Endoscopic Approach

PubMed Central

Pauna, Henrique F.; Monsanto, Rafael C.; Schachern, Patricia A.; Costa, Sady S.; Kwon, Geeyoun; Paparella, Michael M.; Cureoglu, Sebahattin

2016-01-01

Objective Endoscopic procedures are becoming common in middle ear surgery. Inflammation due to chronic ear disease can cause bony erosion of the carotid artery and Fallopian canals, making them more vulnerable during surgery. The objective of this study was to determine whether or not chronic ear disease increases dehiscence of the carotid artery and Fallopian canals. Design Comparative human temporal bone study. Setting Otopathology laboratory. Participants We selected 78 temporal bones from 55 deceased donors with chronic otitis media or cholesteatoma, and then compared those 2 groups with a control group of 27 temporal bones from 19 deceased donors with no middle ear disease. Main outcome measures We analyzed the middle ear, carotid artery canal, and Fallopian canal, looking for signs of dehiscence of its bony coverage, using light microscopy. Results We found an increased incidence in dehiscence of the carotid artery and Fallopian canals in temporal bones with chronic middle ear disease. The size of the carotid artery canal dehiscence was larger in the middle ear diseased groups, and its bony coverage, when present, was also thinner compared to the control group. Dehiscence of the carotid artery canal was more frequently located closer to the promontory. The incidence of Fallopian canal dehiscence was significantly higher in temporal bones from donors older than 18 years with chronic middle ear disease. Conclusion The increased incidence of the carotid artery and Fallopian canal dehiscence in temporal bones with chronic middle ear disease elevates the risk of adverse events during middle ear surgery. Level of Evidence N/A. PMID:27455393

Hydrologic and water-quality data in selected agricultural drainages in Beaufort and Hyde Counties, North Carolina, 1990-92

USGS Publications Warehouse

Treece, M.W.

1993-01-01

An investigation was begun in 1988 to: (1) quantify nutrient, sediment, and freshwater loadings in canals that collect drainage from cropland field ditches; (2) determine the effects of tide gates and flashboard risers on these loadings and on receiving water quality; and (3) characterize the effects of drainage on the salinity regime of a tidal creek. Data were collected in three canals in Hyde County, two canals in Beaufort County, and in Campbell Creek, which receives drainage directly from the Beaufort County canals. A tide gate was placed in one of the Hyde County canals near the beginning of the investigation. In August 1990 following more than 2 years of data collection, control structures were placed in the remaining two Hyde County canals. Flashboard risers were installed in the Beaufort County canals in April 1991. Hydrologic and water quality data are presented for each of the study sites for the period of October 1990 through May 1992. Following a description of the study sites and data collection methods, data are presented for the five drainage canals and Campbell Creek. The data collected included: (1) daily values of accumulated precipitation; (2) water level statistics; (3) daily mean values of discharge in the canals; (4) biweekly water quality measurements and sample analyses; (5) storm-event water quality measurements and sample analyses; (6) continuous records of specific conductance in the canals; (7) vertical profiles of salinity in Campbell Creek; and (8) daily mean values of salinity at five sites at Campbell Creek.

Association of manual or engine-driven glide path preparation with canal centring and apical transportation: a systematic review.

PubMed

Hartmann, R C; Peters, O A; de Figueiredo, J A P; Rossi-Fedele, G

2018-04-28

The role and effect of glide path preparation in root canal treatment remain controversial. This systematic review aims to compare apical transportation and canal centring of different glide path preparation techniques, with or without subsequent engine-driven root canal preparation. A database search in PubMed, PubMed Central, Embase, Scopus, EBSCO Dentistry & Oral Sciences Source and Virtual Health Library was conducted, using appropriate key words to identify the effect of glide path preparation (or its absence) on apical transportation and canal centring. An assessment for the risk of bias in included studies was carried out. Amongst 2146 studies, 18 satisfied the inclusion criteria. Nine studies assessed glide path preparation per se, comparing apical transportation and canal centring of rotary systems and/or manual files; eleven further investigations examined the efficacy of the glide path prior to final canal preparation with different engine-driven systems. Risk of bias and other study design features with potential influence on study outcomes and clinical implications were assessed. Based on the available evidence, and within the limitation of the studies included, preparation of a glide path using rotary sequences performs similarly (in most of the component studies) or significantly better than manual preparation when assessing apical transportation or canal centring. When compared to the absence of a glide path, canal shaping following glide path preparation was of similar, or significantly better quality, in regard to apical transportation or canal centring. © 2018 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Influence of operator's experience on root canal shaping ability with a rotary nickel-titanium single-file reciprocating motion system.

PubMed

Muñoz, Estefanía; Forner, Leopoldo; Llena, Carmen

2014-04-01

The aim of this study was to evaluate the influence of the operator's experience on the shaping of double-curvature simulated root canals with a nickel-titanium single-file reciprocating motion system. Sixty double-curvature root canals simulated in methacrylate blocks were prepared by 10 students without any experience in endodontics and by 10 professionals who had studied endodontics at the postgraduate level. The Reciproc-VDW system's R25 file was used in the root canal preparation. The blocks were photographed before and after the instrumentation, and the time of instrumentation was also evaluated. Changes in root canal dimensions were analyzed in 6 positions. Significant differences (P < .05) were found in the apical transport of the first root canal curvature, with a larger percentage of increase of the root canal occurring in the novice group than in the expert one, as well as in the canal deviation at the beginning of the curvatures, whereas no significant results were obtained in the growth rate of the canal area. There was difference in the time of instrumentation, with 3.76 minutes observed in the novice group, as opposed to 2.05 minutes in the expert group. The use of the single-file reciprocating motion system Reciproc is not seen to be influenced by the operator's experience regarding the increase of the canal area. Previous training and the need to acquire experience are important in the use of this system, in spite of its apparent simplicity. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Second Mesiobuccal Canal Treatment in a Predoctoral Dental Clinic: A Retrospective Clinical Study.

PubMed

Coelho, Marcelo Santos; Parker, Jeffrey M; Tawil, Peter Z

2016-06-01

The aim of this retrospective clinical study was to evaluate the location and treatment of second canals in mesiobuccal roots (MB2) of first and second maxillary molars in a predoctoral endodontic clinic by the graduating classes of 2008 to 2015. These results were compared to similar clinical studies. Included in the study were 368 root canal treatments performed by 310 third- and fourth-year dental students at one U.S. dental school. All cases were done under faculty supervision, and the students were instructed to use dental loupe magnification. Students' evaluation sheets were used to deteremine the total MB2 canals treated in first and second maxillary molars. The results showed that, overall, 72.55% of the teeth had an MB2 canal treated. The frequency was higher in first molars (75.91%) than in second molars (56.92%) (p<0.05). Third-year students were able to detect 39 MB2 canals in 57 maxillary molars (68.42%), while fourth-year students detected 228 MB2 canals in 311 teeth (73.31%) (p>0.05). Under proper supervision by experienced endodontists, these dental students were capable of treating MB2 canals in maxillary molars. The frequency of MB2 canals located and treated by dental students with the assistance of experienced professionals was higher in first than in second molars. No significant difference was found between third- and fourth-year students. The incidence of MB2 canals located and treated in this study was found to be similar to that in other clinical studies.

Semicircular canals in Anolis lizards: ecomorphological convergence and ecomorph affinities of fossil species.

PubMed

Dickson, Blake V; Sherratt, Emma; Losos, Jonathan B; Pierce, Stephanie E

2017-10-01

Anoli s lizards are a model system for the study of adaptive radiation and convergent evolution. Greater Antillean anoles have repeatedly evolved six similar forms or ecomorphs: crown-giant, grass-bush, twig, trunk, trunk-crown and trunk-ground. Members of each ecomorph category possess a specific set of morphological, ecological and behavioural characteristics which have been acquired convergently. Here we test whether the semicircular canal system-the organ of balance during movement-is also convergent among ecomorphs, reflecting the shared sensory requirements of their ecological niches. As semicircular canal shape has been shown to reflect different locomotor strategies, we hypothesized that each Anolis ecomorph would have a unique canal morphology. Using three-dimensional semilandmarks and geometric morphometrics, semicircular canal shape was characterized in 41 Anolis species from the Greater Antilles and the relationship between canal shape and ecomorph grouping, phylogenetic history, size, head dimensions, and perch characteristics was assessed. Further, canal morphology of modern species was used to predict the ecomorph affinity of five fossil anoles from the Miocene of the Dominican Republic. Of the covariates tested, our study recovered ecomorph as the single-most important covariate of canal morphology in modern taxa; although phylogenetic history, size, and head dimensions also showed a small, yet significant correlation with shape. Surprisingly, perch characteristics were not found to be significant covariates of canal shape, even though they are important habitat variables. Using posterior probabilities, we found that the fossil anoles have different semicircular canals shapes to modern ecomorph groupings implying extinct anoles may have been interacting with their Miocene environment in different ways to modern Anolis species.

Semicircular canals in Anolis lizards: ecomorphological convergence and ecomorph affinities of fossil species

NASA Astrophysics Data System (ADS)

Dickson, Blake V.; Sherratt, Emma; Losos, Jonathan B.; Pierce, Stephanie E.

2017-10-01

Anolis lizards are a model system for the study of adaptive radiation and convergent evolution. Greater Antillean anoles have repeatedly evolved six similar forms or ecomorphs: crown-giant, grass-bush, twig, trunk, trunk-crown and trunk-ground. Members of each ecomorph category possess a specific set of morphological, ecological and behavioural characteristics which have been acquired convergently. Here we test whether the semicircular canal system-the organ of balance during movement-is also convergent among ecomorphs, reflecting the shared sensory requirements of their ecological niches. As semicircular canal shape has been shown to reflect different locomotor strategies, we hypothesized that each Anolis ecomorph would have a unique canal morphology. Using three-dimensional semilandmarks and geometric morphometrics, semicircular canal shape was characterized in 41 Anolis species from the Greater Antilles and the relationship between canal shape and ecomorph grouping, phylogenetic history, size, head dimensions, and perch characteristics was assessed. Further, canal morphology of modern species was used to predict the ecomorph affinity of five fossil anoles from the Miocene of the Dominican Republic. Of the covariates tested, our study recovered ecomorph as the single-most important covariate of canal morphology in modern taxa; although phylogenetic history, size, and head dimensions also showed a small, yet significant correlation with shape. Surprisingly, perch characteristics were not found to be significant covariates of canal shape, even though they are important habitat variables. Using posterior probabilities, we found that the fossil anoles have different semicircular canals shapes to modern ecomorph groupings implying extinct anoles may have been interacting with their Miocene environment in different ways to modern Anolis species.

Geology of the Chesapeake and Ohio Canal National Historical Park and Potomac River Corridor, District of Columbia, Maryland, West Virginia, and Virginia

USGS Publications Warehouse

Southworth, Scott; Brezinski, David K.; Orndorff, Randall C.; Repetski, John E.; Denenny, Danielle M.

2008-01-01

The Chesapeake and Ohio Canal National Historical Park is 184.5 mi long and extends from Washington, D.C., to Cumberland, Md. The canal passes through three physiographic provinces including the Piedmont, Valley and Ridge, and the Blue Ridge; the map area also includes rocks of the Coastal Plain and Appalachian Plateaus provinces. Each province contains unique packages of rocks that influenced the character of the canal and towpath. The ages of the bedrock encountered along the length of the park range from Mesoproterozoic to Jurassic and represent a variety of tectonic and depositional environments. The different rock types and surficial deposits dictated the various construction methods for the canal, which was excavated in Quaternary flood-plain deposits as well as through bedrock. The ancient course of the Potomac River and the deposits it left behind also influenced the location of the canal and towpath. The engineers made good use of the many rock types to construct the locks, dams, aqueducts, and culverts that guided water from the Potomac River into the canal and maintained the water level as canal boats traveled between higher elevations in western Maryland to sea level in Washington, D.C. The canal and towpath provide a unique transect across the central Appalachian region for examining the rich geologic diversity and history.

Overt and occult vidian canal involvement in juvenile angiofibroma and its possible impact on recurrence.

PubMed

Thakar, Alok; Hota, Ashutosh; Bhalla, Ashu Seth; Gupta, Siddharth Datta; Sarkar, Chitra; Kumar, Rakesh

2016-04-01

Postexcision residual disease in the vidian canal is speculated to contribute to recurrence in juvenile angiofibroma. We composed a prospective cohort of 16 consecutive patients with juvenile angiofibroma (stages IIA-IIIB). The presurgical vidian canal assessment was done by contrast-enhanced CT (1.2 mm collimation). At surgery after complete tumor excision, the vidian canal tissue was sampled for histology. Postexcision drilling of the vidian canal was done in 8 of 15 patients to remove microscopic residual disease, with a 24 to 48 month follow-up period. Presurgical radiology indicated ipsilateral vidian canal enlargement (≥3 mm)/destruction in 13 of 16 patients. Radiologically occult involvement was documented only by histology in another 1 of 16 patients. Postexcision sampling of the vidian canal noted microscopic residual tumor in 3 of 15 patients. No recurrences were noted in 8 cases (0 of 8) with postexcision drilling of the vidian canal and 2 recurrences in 7 cases (2 of 7) with no drilling (p = .20). Vidian canal involvement in juvenile angiofibroma is almost universal (14 of 16) and may be occult to CT evaluation. The site may harbor microscopic residual tumor after seemingly complete excision. Surgical attention toward it may reduce recurrences. © 2015 Wiley Periodicals, Inc. Head Neck 38: E421-425, 2016. © 2015 Wiley Periodicals, Inc.

Endodontic Management of a Maxillary Lateral Incisor with 4 Root Canals and a Dens Invaginatus Tract.

PubMed

Nosrat, Ali; Schneider, S Craig

2015-07-01

Dens invaginatus (DI) is associated with complex internal anatomy. This article represents a maxillary lateral incisor with 5 root canals including DI. The treatment was planned and performed using cone-beam computed tomographic (CBCT) imaging. After clinical and radiographic evaluations, tooth #7 was diagnosed with DI and pulp necrosis with symptomatic apical periodontitis. Periapical radiographs of the tooth showed 2 roots and complex internal anatomy. CBCT evaluation revealed tooth #7 had 5 separate canals (4 root canals and 1 DI canal extending through the root to the periodontal ligament), communication between DI and the root canal system, and severe and multiple curvatures of the palatal canals. Root canal treatment was completed in 2 visits. Modified access openings were required to safely treat the dilacerated palatal canals. At the 6-month re-evaluation, the patient reported he had remained asymptomatic and his tooth had remained functional since the treatment was completed. Clinical examination showed tooth #7 had no sensitivity to percussion or palpation, probe depths within normal limits (≤3 mm), and no mobility. Radiographic assessment of the tooth showed significant osseous healing of the preoperative lesion. Three-dimensional imaging is a valuable tool for endodontic management of teeth with complex internal anatomy. Three-dimensional imaging is recommended for evaluating and treatment planning cases with DI. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

An in vitro morphological investigation of the endodontic spaces of third molars.

PubMed

Cosić, Jozo; Galić, Nada; Vodanović, Marin; Njemirovskij, Vera; Segović, Sanja; Pavelić, Bozidar; Anić, Ivica

2013-06-01

Aim of this paper was to investigate the particular anatomic features of the endodontic space of third molars in the general population of Croatia. A total of 106 fully developed third molars (56 maxillar and 50 mandibular) has been analyzed. The respective number of roots and of root canals, the structure of the roots, and the curvature and absolute length of the root-canals were analyzed. In most cases, upper third molars had three roots (83.9%), while most of the lower molars were single rooted (56.0%). Upper third molars had mostly three root canals (75.1%), lower third molars two (90.0%). In both jaws, most third molars had curved canals (60.7% in the upper and 84.0% in the lower jaw). 12.5% of upper third molars had lateral and accessory canals, whereas only 4.0% of the lower third molars were found to have them. The Student t-test showed statistically significant differences (p < 0.05) in the length of the root-canals, mesiobuccal and distobuccal canals being significantly shorter than palatinal canals. The same test showed that in the lower third molars the mesial root canals were significantly longer that the distal ones, although slightly. The results obtained are in compliance with similar results by other authors; however, they tend to show some specific population-related features.

Comparative study of ProTaper gold, reciproc, and ProTaper universal for root canal preparation in severely curved root canals

PubMed Central

Arslan, Hakan; Yildiz, Ezgi Doganay; Gunduz, Hicran Ates; Sumbullu, Meltem; Bayrakdar, Ibrahim Sevki; Karatas, Ertugrul; Sumbullu, Muhammed Akif

2017-01-01

Aim: The aim of this study is to evaluate the root canal transportation, centering ability, and instrumentation times with the ProTaper Gold (Dentsply Tulsa Dental, Tulsa, OK, USA), Reciproc (VDW, Munich, Germany), and ProTaper Universal (Dentsply Maillefer, Ballaigues, Switzerland) using cone-beam computed tomography (CBCT). Materials and Methods: Thirty mesial root canals of mandibular first molars with curvature angles of 35°–70° and radii of 2–6 mm were included in the study. Root canal instrumentation was performed up to F2 or R25. The instrumentation times were recorded. CBCT scanning was performed both pre- and post-instrumentation. Root canal transportation and the centering ratio were calculated for groups, and the data were analyzed using a one-way ANOVA and least significant difference post hoc tests for the instrumentation time, root canal transportation, and centering ratio at the 95% confidence level (P = 0.05). Results: At 3, 5, and 7 mm levels, there was no significant difference in the root canal transportation and centering ratio among the groups (P > 0.05). There were significant differences between the Reciproc and ProTaper Universal groups in the instrumentation times (P < 0.05). Conclusion: Root canal transportation and the centering ratio with the ProTaper Gold were similar to those obtained with the ProTaper Universal and Reciproc. PMID:29259355

Canal transportation and centering ability of protaper and self-adjusting file system in long oval canals: An ex-vivo cone-beam computed tomography analysis

PubMed Central

Shah, Dipali Yogesh; Wadekar, Swati Ishwara; Dadpe, Ashwini Manish; Jadhav, Ganesh Ranganath; Choudhary, Lalit Jayant; Kalra, Dheeraj Deepak

2017-01-01

Context and Aims: The purpose of this study was to compare and evaluate the shaping ability of ProTaper (PT) and Self-Adjusting File (SAF) system using cone-beam computed tomography (CBCT) to assess their performance in oval-shaped root canals. Materials and Methods: Sixty-two mandibular premolars with single oval canals were divided into two experimental groups (n = 31) according to the systems used: Group I – PT and Group II – SAF. Canals were evaluated before and after instrumentation using CBCT to assess centering ratio and canal transportation at three levels. Data were statistically analyzed using one-way analysis of variance, post hoc Tukey's test, and t-test. Results: The SAF showed better centering ability and lesser canal transportation than the PT only in the buccolingual plane at 6 and 9 mm levels. The shaping ability of the PT was best in the apical third in both the planes. The SAF had statistically significant better centering and lesser canal transportation in the buccolingual as compared to the mesiodistal plane at the middle and coronal levels. Conclusions: The SAF produced significantly less transportation and remained centered than the PT at the middle and coronal levels in the buccolingual plane of oval canals. In the mesiodistal plane, the performance of both the systems was parallel. PMID:28855757

Application of quantitative real-time PCR compared to filtration methods for the enumeration of Escherichia coli in surface waters within Vietnam.

PubMed

Vital, Pierangeli G; Van Ha, Nguyen Thi; Tuyet, Le Thi Hong; Widmer, Kenneth W

2017-02-01

Surface water samples in Vietnam were collected from the Saigon River, rural and suburban canals, and urban runoff canals in Ho Chi Minh City, Vietnam, and were processed to enumerate Escherichia coli. Quantification was done through membrane filtration and quantitative real-time polymerase chain reaction (PCR). Mean log colony-forming unit (CFU)/100 ml E. coli counts in the dry season for river/suburban canals and urban canals were log 2.8 and 3.7, respectively, using a membrane filtration method, while using Taqman quantitative real-time PCR they were log 2.4 and 2.8 for river/suburban canals and urban canals, respectively. For the wet season, data determined by the membrane filtration method in river/suburban canals and urban canals samples had mean counts of log 3.7 and 4.1, respectively. While mean log CFU/100 ml counts in the wet season using quantitative PCR were log 3 and 2, respectively. Additionally, the urban canal samples were significantly lower than those determined by conventional culture methods for the wet season. These results show that while quantitative real-time PCR can be used to determine levels of fecal indicator bacteria in surface waters, there are some limitations to its application and it may be impacted by sources of runoff based on surveyed samples.

Microorganism penetration in dentinal tubules of instrumented and retreated root canal walls. In vitro SEM study.

PubMed

Al-Nazhan, Saad; Al-Sulaiman, Alaa; Al-Rasheed, Fellwa; Alnajjar, Fatimah; Al-Abdulwahab, Bander; Al-Badah, Abdulhakeem

2014-11-01

This in vitro study aimed to investigate the ability of Candida albicans (C. albicans) and Enterococcus faecalis (E. faecalis) to penetrate dentinal tubules of instrumented and retreated root canal surface of split human teeth. Sixty intact extracted human single-rooted teeth were divided into 4 groups, negative control, positive control without canal instrumentation, instrumented, and retreated. Root canals in the instrumented group were enlarged with endodontic instruments, while root canals in the retreated group were enlarged, filled, and then removed the canal filling materials. The teeth were split longitudinally after canal preparation in 3 groups except the negative control group. The teeth were inoculated with both microorganisms separately and in combination. Teeth specimens were examined by scanning electron microscopy (SEM), and the depth of penetration into the dentinal tubules was assessed using the SMILE view software (JEOL Ltd). Penetration of C. albicans and E. faecalis into the dentinal tubules was observed in all 3 groups, although penetration was partially restricted by dentin debris of tubules in the instrumented group and remnants of canal filling materials in the retreated group. In all 3 groups, E. faecalis penetrated deeper into the dentinal tubules by way of cell division than C. albicans which built colonies and penetrated by means of hyphae. Microorganisms can easily penetrate dentinal tubules of root canals with different appearance based on the microorganism size and status of dentinal tubules.

WEAR PROMOTED IN THE APICAL THIRD OF SIMULATED CANALS AFTER INSTRUMENTATION WITH PROTAPER UNIVERSAL SYSTEM

PubMed Central

da Silva, Kathrein Tapia; Grazziotin-Soares, Renata; Limongi, Orlando; Irala, Luis Eduardo Duarte; Salles, Alexandre Azevedo

2009-01-01

Objective: This study evaluated the wear in the apical third of simulate canals after preparation with ProTaper Universal Rotary System. Material and Methods: 24 sets of instruments were used in 24 simulated canals in transparent epoxy resin blocks with degree of curvature of either 20°or 40°. The canals were photographed preoperatively and after preparation of the apical stop with ProTaper F3, F4 and F5 instruments. The initial and final images were exported to Adobe Photoshop® software and superimposed to detect the root canal wall differences (in mm) between them, in two points located 1 (A) and 5 (B) mm from the point where the working length was established. Data were subjected to analysis of variance to verify the existence of interaction among the factors: canal curvature, instrument size and curve location. Significant level was set at 5%. Results: Regardless of the location and the canal curvature, F4 and F5 instruments produced the greatest wear (p<0.05). Conclusions: There was a deviation from the original pathway towards the outside of the root curvature in both analyzed points. All instruments produced canal transportation, but the F4 and F5 instruments produced more than the other instruments, and should thus be used with care in curved canals. PMID:19936533

Decline in semicircular canal and otolith function with age

PubMed Central

Agrawal, Yuri; Zuniga, M. Geraldine; Davalos-Bichara, Marcela; Schubert, Michael C.; Walston, Jeremy D.; Hughes, Jennifer; Carey, John P.

2012-01-01

Objective To characterize the physiologic nature of the vestibular dysfunction that occurs with the normative aging process. Study design Cross-sectional study. Setting Tertiary care academic medical center. Patients Fifty individuals age 70 and above. Interventions Head thrust dynamic visual acuity testing (htDVA) and cervical and ocular vestibular-evoked myogenic potential (VEMP) testing. Main Outcome Measures Semicircular canal function measured by htDVA in each of the three semicircular canal planes, and saccular and utricular function measured by cVEMP and oVEMP testing, respectively. Results We observed significant declines in semicircular canal function in each of the canal planes as well as otolith function associated with aging. We found that individuals with impaired horizontal and superior semicircular canal function were likely to also have concomitant deficits in utricular but not saccular function. Overall, we noted that the prevalence of semicircular canal dysfunction was highest followed by saccular then utricular impairment, although we did observe individuals with isolated otolith deficits. Conclusions These data suggest an overall decline in semicircular canal as well as otolith function associated with aging, although the magnitude of impairment was greater for the semicircular canals than the otoliths in this elderly population. A better understanding of the specific vestibular deficits that occur with aging can inform the development of rational screening, vestibular rehabilitation and fall risk reduction strategies in older individuals. PMID:22699991

Clinical significance of dental root canal microflora.

PubMed

Gomes, B P; Lilley, J D; Drucker, D B

1996-01-01

Previous work by this group has shown that a significant association exists between pain and the presence of either Prevotella or Peptostreptococcus spp. in dental root canals. The aim of this study was to examine a more extensive series of canals microbiologically, to determine whether any other particular endodontic symptoms or clinical signs showed specific associations with individual bacterial species. Seventy root canals were examined microbiologically and clinical data collected to investigate in detail such associations. Of the canals studied, 37 were associated with pain, 49 with tenderness to percussion, 23 with swelling, six with purulent exudate and 57 presented with wet root canals. Anaerobes were isolated from 70.3% of painful canals and from 29.7% of pain-free canals. Significant associations were found between (a) pain and either Prevotella spp. or peptostreptococci, both with P < 0.01; (b) tenderness to percussion and Prevotella spp. (P < 0.01) or anaerobes (P < 0.05); (c) swelling and Eubacterium spp. (P < 0.01), or with Prevotella spp. or Pstr. micros, both with P < 0.05; (d) purulent exudate and any one of F. necrophorum (P < 0.01), Prev. loescheii, Streptoccoccus constellatus or Bacteroides spp. (each P < 0.05); (e) wet canal and facultative anaerobes (P < 0.01), and any one of the genera of Eubacterium, Peptostreptococcus, Prevotella or Propionibacterium (each P < 0.05). It was concluded that several different endodontic clinical signs and symptoms are significantly associated with specific bacterial species.

Challenges in fitting a hearing aid to a severely collapsed ear canal and mixed hearing loss.

PubMed

Oeding, Kristi; Valente, Michael; Chole, Richard

2012-04-01

Collapsed ear canals typically occur when an outside force, such as a headset for audiometric testing, is present. However, when a collapsed ear canal occurs without external pressure, this creates a challenge not only for performing audiometric testing but also for coupling a hearing aid to the ear canal. This case report highlights the challenges associated with fitting a hearing aid on a patient with a severe anterior-posterior collapsed ear canal with a mixed hearing loss. A 67-yr-old female originally presented to Washington University in St. Louis School of Medicine in 1996 with a long-standing history of bilateral otosclerosis. She had chronic ear infections in the right ear and a severely collapsed ear canal in the left ear and was fit with a bone anchored hearing aid (BAHA®) on the right side in 2003. However, benefit from the BAHA started to decrease due to changes in hearing, and a different hearing solution was needed. It was proposed that a hearing aid be fit to her collapsed left ear canal; however, trying to couple a hearing aid to the collapsed ear canal required unique noncustom earmold solutions. This case study highlights some of the obstacles and potential solutions for coupling a hearing aid to a severely collapsed ear canal. American Academy of Audiology.

Root canal morphology of primary molars: a micro-computed tomography study.

PubMed

Fumes, A C; Sousa-Neto, M D; Leoni, G B; Versiani, M A; da Silva, L A B; da Silva, R A B; Consolaro, A

2014-10-01

This was to investigate the root canal morphology of primary molar teeth using micro-computed tomography. Primary maxillary (n = 20) and mandibular (n = 20) molars were scanned at a resolution of 16.7 μm and analysed regarding the number, location, volume, area, structured model index (SMI), area, roundness, diameters, and length of canals, as well as the thickness of dentine in the apical third. Data were statistically compared by using paired-sample t test, independent sample t test, and one-way analysis of variance with significance level set as 5%. Overall, no statistical differences were found between the canals with respect to length, SMI, dentine thickness, area, roundness, and diameter (p > 0.05). A double canal system was observed in the mesial and mesio-buccal roots of the mandibular and maxillary molars, respectively. The thickness in the internal aspect of the roots was lower than in the external aspect. Cross-sectional evaluation of the roots in the apical third showed flat-shaped canals in the mandibular molars and ribbon- and oval-shaped canals in the maxillary molars. External and internal anatomy of the primary first molars closely resemble the primary second molars. The reported data may help clinicians to obtain a thorough understanding of the morphological variations of root canals in primary molars to overcome problems related to shaping and cleaning procedures, allowing appropriate management strategies for root canal treatment.

157. Photocopy of drawing (taken from Twin Falls Canal Company ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

157. Photocopy of drawing (taken from Twin Falls Canal Company Field Book #360, Page 75, entitled, 'Clay-Seam Cut-Off.' Cross-Reference: ID-15-153). MILNER DAM SURVEY, TWIN FALLS COUNTY, MILNER, IDAHO. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

153. Photocopy of drawing (taken from Twin Falls Canal Company ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

153. Photocopy of drawing (taken from Twin Falls Canal Company Field Book #360, Page 74, entitled, 'Clay-Seam Cut-Off.' Cross-Reference: ID-15-157). MILNER DAM SURVEY, TWIN FALLS COUNTY, MILNER, IDAHO. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

5 CFR 315.601 - Appointment of former employees of the Canal Zone Merit System or Panama Canal Employment System.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Appointment of former employees of the Canal Zone Merit System or Panama Canal Employment System. 315.601 Section 315.601 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS CAREER AND CAREER-CONDITIONAL EMPLOYMENT Career or Career-Conditional Appointment Unde...

Developmental spinal canal stenosis and somatotype.

PubMed Central

Nightingale, S

1989-01-01

The hypothesis that somatotype and cervical spine developmental canal stenosis may be associated has been investigated by anthropometry and measurement of lateral projection cervical spine radiographs. A significant association of canal size with somatotype has been found such that those with developmentally narrow canals are more likely to have relatively shorter long-bones, particularly in the upper arm, and longer trunks. Images PMID:2769282

33 CFR 162.175 - Black Rock Canal and Lock at Buffalo, New York.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Black Rock Canal and Lock at Buffalo, New York. 162.175 Section 162.175 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF... Black Rock Canal and Lock at Buffalo, New York. In the Black Rock Canal and Lock, no vessel may exceed 6...

33 CFR 162.175 - Black Rock Canal and Lock at Buffalo, New York.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Black Rock Canal and Lock at Buffalo, New York. 162.175 Section 162.175 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF... Black Rock Canal and Lock at Buffalo, New York. In the Black Rock Canal and Lock, no vessel may exceed 6...

33 CFR 162.175 - Black Rock Canal and Lock at Buffalo, New York.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Black Rock Canal and Lock at Buffalo, New York. 162.175 Section 162.175 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF... Black Rock Canal and Lock at Buffalo, New York. In the Black Rock Canal and Lock, no vessel may exceed 6...

33 CFR 162.175 - Black Rock Canal and Lock at Buffalo, New York.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Black Rock Canal and Lock at Buffalo, New York. 162.175 Section 162.175 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF... Black Rock Canal and Lock at Buffalo, New York. In the Black Rock Canal and Lock, no vessel may exceed 6...

33 CFR 162.175 - Black Rock Canal and Lock at Buffalo, New York.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Black Rock Canal and Lock at Buffalo, New York. 162.175 Section 162.175 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF... Black Rock Canal and Lock at Buffalo, New York. In the Black Rock Canal and Lock, no vessel may exceed 6...

184. Photocopy of drawing (taken from right corner of Twin ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

184. Photocopy of drawing (taken from right corner of Twin Falls Canal Company drawing #7017, located in Twin Falls Canal Company office, Twin Falls, Idaho). ORIGINAL 1900 SEGREGATION DAM PLAN, TWIN FALLS COUNTY, MILNER, IDAHO. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

161. Photocopy of Photograph (original in Roger Lewis' private collection, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

161. Photocopy of Photograph (original in Roger Lewis' private collection, Twin Falls, Idaho). Photographer and date unknown. MILNER DAM, SOUTH SIDE CANAL, TWIN FALLS COUNTY, MILNER, IDAHO; WORKERS AT CAMP AT HEAD OF CANAL. - Milner Dam & Main Canal: Twin Falls Canal Company, On Snake River, 11 miles West of city of Burley, Idaho, Twin Falls, Twin Falls County, ID

78 FR 7670 - Safety Zone; Indian Street Bridge Construction, St. Lucie Canal, Palm City, FL

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-04

... 1625-AA00 Safety Zone; Indian Street Bridge Construction, St. Lucie Canal, Palm City, FL AGENCY: Coast... zone on the St. Lucie Canal, Palm City, Florida to provide for the safety of life and vessels on a... on a narrow waterway. The temporary safety zone encompasses all waters of the St. Lucie Canal in the...

18. View of Andrew McLean Company Textile Mill looking north; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. View of Andrew McLean Company Textile Mill looking north; Building No. 3 at center right, Building No. 2 at center distance, Dundee Canal at left - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

Towpaths to Oblivion. The Middlesex Canal and the Coming of the Railroad 1792-1853.

ERIC Educational Resources Information Center

Holmes, Cary W.

This narrative history of the Middlesex Canal from 1792-1853 is designed to be used with "Canal," a role-playing, decision-making game found in SO 011 886. Economic, social, and political factors related to planning, building, and implementing the canal are considered. The document is presented in three parts. Part I states reasons for…

Maxillary first molar with aberrant canal configuration: a report of 3 cases.

PubMed

Poorni, Saravanan; Kumar, Anil; Indira, Rajamani

2008-12-01

The prognosis for endodontic treatment in teeth exhibiting morphological aberrations is unfavorable if the clinician fails to recognize extra root canals. This report demonstrates 3 clinical cases of maxillary first molars that presented 2 canals in the palatal root merging at the apical third (Vertucci's type II canal morphology), a pattern that is rare and seldom encountered.

30. MAIN CANAL Photographic copy of historic photo, January ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

30. MAIN CANAL - Photographic copy of historic photo, January 29, 1907 (original print filed in Record Group 115, National Archives, Washington, D.C.) W.J.Lubken, photographer 'CHECK GATES ON SOUTHERN CANAL, STA.118, JUST ABOVE THE ENTRANCE END OF DARK CANYON PRESSURE PIPE' - Carlsbad Irrigation District, Main Canal, 4 miles North to 12 miles Southeast of Carlsbad, Carlsbad, Eddy County, NM

41. View of Botany Worsted Mills looking southeast from site ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

41. View of Botany Worsted Mills looking southeast from site of former Forstmann and Huffman textile mill; water tank (No. 43A) at center, Dundee Canal to left - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

25. View of Botany Mills Lanolin Retrieval plant site looking ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. View of Botany Mills Lanolin Retrieval plant site looking northwest from Andrew McLean Company Textile Mill; Botany Worsted Mills and Dundee Canal at left - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

The Use of Lasers in Disinfection and Cleanliness of Root Canals: a Review

PubMed Central

Anić, Ivica

2014-01-01

The outcome of root canal treatment is based on efficient disinfection of the root canal system and prevention of reinfection. Current chemomechanical cleaning methods do not always achieve these goals, and insufficient root canal disinfection is the main reason for endodontic failure. Due to high energy content and specific characteristics of laser light, laser treatment has been proposed for cleaning and disinfecting the root canal system. This paper reviews the literature covering the effect of Er:YAG, Er,Cr:YSGG, Nd:YAG and diode laser on the root canal wall in the removal of smear layer and against intracanal bacteria. Recently, the use of laser energy to induce cavitation and acoustic streaming of intracanal irrigants has been investigated. Based on recent literature, it can be concluded that lasers have bactericidal effects. However, they still cannot replace sodium hypochlorite and should be considered as an adjunct to the current chemical root canal disinfection protocols. Certain lasers can help in removing the smear layer and debris and can modify the morphology of the root canal wall. Unfortunately, there have not been enough randomized clinical studies evaluating endodontic treatment outcome following the use of laser. PMID:27688346

Prevalence of C-shaped canals in mandibular second and third molars in a central India population: A cone beam computed tomography analysis.

PubMed

Wadhwani, Shefali; Singh, Mahesh Pratap; Agarwal, Manish; Somasundaram, Pavithra; Rawtiya, Manjusha; Wadhwani, P K

2017-01-01

To evaluate the prevalence of C-shaped root canals in mandibular molars using cone beam computed tomography (CBCT) in a subpopulation of Central India. CBCT scans of patients from diagnostic imaging center were selected in accordance with the criteria given by Fan et al . (2004) for C-shaped canals. A total of 238 CBCT scans fulfilled the inclusion criteria and thereby divided into two groups: Group 1: Images showing C-shaped canal configuration in mandibular second molars. Group 2: Images showing C-shaped canal configuration in mandibular third molars. The frequency and distribution of canals and their configuration along with the position of lingual/buccal grooves in the images were evaluated, and the data was analyzed. CBCT evaluation showed that 9.7% of second molars and 8% of third molars had C-shaped canals. A prominent buccal groove was seen in these teeth. The data showed a significant difference ( P = 0.038) for the presence of such anatomy on the right side for mandibular third molars. The study showed a significant prevalence of C-shaped canal configuration in the subpopulation studied.

Prevalence of C-shaped canals in mandibular second and third molars in a central India population: A cone beam computed tomography analysis

PubMed Central

Wadhwani, Shefali; Singh, Mahesh Pratap; Agarwal, Manish; Somasundaram, Pavithra; Rawtiya, Manjusha; Wadhwani, P. K.

2017-01-01

Introduction: To evaluate the prevalence of C-shaped root canals in mandibular molars using cone beam computed tomography (CBCT) in a subpopulation of Central India. Materials and Methods: CBCT scans of patients from diagnostic imaging center were selected in accordance with the criteria given by Fan et al. (2004) for C-shaped canals. A total of 238 CBCT scans fulfilled the inclusion criteria and thereby divided into two groups: Group 1: Images showing C-shaped canal configuration in mandibular second molars. Group 2: Images showing C-shaped canal configuration in mandibular third molars. The frequency and distribution of canals and their configuration along with the position of lingual/buccal grooves in the images were evaluated, and the data was analyzed. Results: CBCT evaluation showed that 9.7% of second molars and 8% of third molars had C-shaped canals. A prominent buccal groove was seen in these teeth. The data showed a significant difference (P = 0.038) for the presence of such anatomy on the right side for mandibular third molars. Conclusion: The study showed a significant prevalence of C-shaped canal configuration in the subpopulation studied. PMID:29386785

Sugar receptor response of the food-canal taste sensilla in a nectar-feeding swallowtail butterfly, Papilio xuthus.

PubMed

Inoue, Takashi A; Asaoka, Kiyoshi; Seta, Kazuaki; Imaeda, Daisuke; Ozaki, Mamiko

2009-03-01

The feeding behavior in nectar-feeding insects is triggered by a sugar-receptor response in contact chemosensilla. The contact chemosensilla are distributed not only on tarsi and the outside of the proboscis but also on the inside of the food canal in Lepidoptera. Although the chemosensilla inside the food canal are assumed to detect sweet taste during the passage of nectar through the food canal, their electrophysiological function has received little attention. In the nectar-feeding Asian swallowtail butterfly, Papilio xuthus (Lepidoptera: Papilionidae), we found 15- to 30-mum-long sensilla neatly lined up along the inside galea wall, which forms the food canal in the proboscis. The receptor neurons of these sensilla responded to sucrose. We hypothesized that starch and sucrose compete with each other for a taste receptor site on the sensilla. When we added starch and sucrose to the food-canal sensilla, the electrophysiological responses of food-canal sensilla were inhibited in parallel with the food-sucking behavior of the butterflies. These results suggest that the food-canal sensilla are involved in the behavioral control of nectar-sucking in this butterfly species.

The effect of passive ultrasonic activation of 2% chlorhexidine or 5.25% sodium hypochlorite irrigant on residual antimicrobial activity in root canals.

PubMed

Weber, Carol Diener; McClanahan, Scott B; Miller, Glenn A; Diener-West, Marie; Johnson, James D

2003-09-01

Ninety-four single-canal roots were prepared using the step-down technique. Forty-two canals were irrigated with 2% chlorhexidine, 42 canals with 5.25% sodium hypochlorite (NaOCl), and 10 control canals with phosphate-buffered saline (PBS). The chlorhexidine and NaOCl groups were each then equally divided into a final irrigation group and a 1-min passive ultrasonic irrigation group. Canals were enlarged with a Parapost drill. The apical 3-5 mm was covered with nail polish. Canals were rinsed with PBS, dried, refilled with PBS, and stored. At 6 h, 20 microl of fluid was pipetted from each canal and placed into wells on agar plates, which were inoculated with Streptococcus sanguinis. The plates were incubated, and zones of inhibition were measured. Sampling was repeated at 24, 48, 72, 96, 120, 144, and 168 h. Residual antimicrobial activity with 2% chlorhexidine was statistically significantly superior to 5.25% NaOCl with irrigation alone and with final passive ultrasonic activation (p < 0.001). Chlorhexidine experimental groups demonstrated residual antimicrobial activity for as long as 168 h.

Shaping Ability of Single-file Systems with Different Movements: A Micro-computed Tomographic Study.

PubMed

Santa-Rosa, Joedy; de Sousa-Neto, Manoel Damião; Versiani, Marco Aurelio; Nevares, Giselle; Xavier, Felipe; Romeiro, Kaline; Cassimiro, Marcely; Leoni, Graziela Bianchi; de Menezes, Rebeca Ferraz; Albuquerque, Diana

2016-01-01

This study aimed to perform a rigorous sample standardization and also evaluate the preparation of mesiobuccal (MB) root canals of maxillary molars with severe curvatures using two single-file engine-driven systems (WaveOne with reciprocating motion and OneShape with rotary movement), using micro-computed tomography (micro-CT). Ten MB roots with single canals were included, uniformly distributed into two groups (n=5). The samples were prepared with a WaveOne or OneShape files. The shaping ability and amount of canal transportation were assessed by a comparison of the pre- and post-instrumentation micro-CT scans. The Kolmogorov-Smirnov and t-tests were used for statistical analysis. The level of significance was set at 0.05. Instrumentation of canals increased their surface area and volume. Canal transportation occurred in coronal, middle and apical thirds and no statistical difference was observed between the two systems (P>0.05). In apical third, significant differences were found between groups in canal roundness (in 3 mm level) and perimeter (in 3 and 4 mm levels) (P<0.05). The WaveOne and One Shape single-file systems were able to shape curved root canals, producing minor changes in the canal curvature.

Evolution of the role of phototherapy during endodontic decontamination

PubMed Central

Muhammad, Omid Heidar; Rocca, Jean-Paul; Fornaini, Carlo

2015-01-01

A microbe free root canal space before obturation leads to higher success rate and conventional chemo-mechanical debridement might not achieve this goal completely. First trials of laser in dentistry started from surgical intervention on caries and bones of oral cavity and extended to prepare cavities and even shaping root canals. Afterward lasers were implicated soon into direct debridement of root canal space. Anyhow failure of laser to remove debris totally from root canal space is demonstrated recently, additionally it might lead to damages to surrounding tissues or inorganic material of root canal if be used without precaution. Nowadays the theory of light assisted protocols became another start point for laser in endodontics. Laser has been introduced as an adjuvant to conventional debridement of root canals. We used Medline search engine to collect scientific publications to edit this review article in purpose of revealing the evolution of laser position from an ultimate cleaning methodology to an adjuvant to conventional root canal disinfection protocols. PMID:26877593

Canal wall reconstruction and preservation in the surgical management of cholesteatoma in children with Down's syndrome.

PubMed

Nash, Robert; Possamai, Victoria; Maskell, Scott; Bailey, Martin; Albert, David

2014-10-01

Down's syndrome is associated with poor Eustachian tube function, and an increased incidence of cholesteatoma. The only previously published case series suggests that 'canal wall preserving' procedures are only rarely suitable for the management of cholesteatoma in this population. We conducted a retrospective review of the hospital's clinical records database to identify patients with Down's syndrome and cholesteatoma. These patients' notes were then reviewed. We identified nine patients with Down's syndrome who had undergone surgical management of cholesteatoma over a twelve year period. Three patients had bilateral disease, meaning twelve ears were treated. Seven ears were initially treated with 'canal wall down' procedures. Four out of five of the remaining ears were successfully treated using 'canal wall preservation' or 'canal wall reconstruction', with one ear requiring subsequent conversion to a 'canal wall down' approach. Canal wall preservation/reconstruction is feasible in patients with Down's syndrome, even when cholesteatoma extends into the mastoid. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Length and Geometric Patterns of the Greater Palatine Canal Observed in Cone Beam Computed Tomography

PubMed Central

Howard-Swirzinski, Karen; Edwards, Paul C.; Saini, Tarnjit S.; Norton, Neil S.

2010-01-01

The greater palatine canal is an important anatomical structure that is often utilized as a pathway for infiltration of local anesthesia to affect sensation and hemostasis. Increased awareness of the length and anatomic variation in the anatomy of this structure is important when performing surgical procedures in this area (e.g., placement of osseointegrated dental implants). We examined the anatomy of the greater palatine canal using data obtained from CBCT scans of 500 subjects. Both right and left canals were viewed (N = 1000) in coronal and sagittal planes, and their paths and lengths determined. The average length of the greater palatine canal was 29 mm (±3 mm), with a range from 22 to 40 mm. Coronally, the most common anatomic pattern consisted of the canal traveling inferior-laterally for a distance then directly inferior for the remainder (43.3%). In the sagittal view, the canal traveled most frequently at an anterior-inferior angle (92.9%). PMID:20871845

Micro computed tomography evaluation of the Self-adjusting file and ProTaper Universal system on curved mandibular molars.

PubMed

Serefoglu, Burcu; Piskin, Beyser

2017-09-26

The aim of this investigation was to compare the cleaning and shaping efficiency of Self-adjusting file and Protaper, and to assess the correlation between root canal curvature and working time in mandibular molars using micro-computed tomography. Twenty extracted mandibular molars instrumented with Protaper and Self-adjusting file and the total working time was measured in mesial canals. The changes in canal volume, surface area and structure model index, transportation, uninstrumented area and the correlation between working-time and the curvature were analyzed. Although no statistically significant difference was observed between two systems in distal canals (p>0.05), a significantly higher amount of removed dentin volume and lower uninstrumented area were provided by Protaper in mesial canals (p<0.0001). A correlation between working-time and the canal-curvature was also observed in mesial canals for both groups (SAFr 2 =0.792, p<0.0004, PTUr 2 =0.9098, p<0.0001).

Endodontic management of mandibular third molar with three mesial roots using spiral computed tomography scan as a diagnostic aid: a case report.

PubMed

Tomar, Deepak; Dhingra, Anil; Tomer, Anil; Sharma, Shalini; Sharma, Vivek; Miglani, Anjali

2013-05-01

Aberrant root canal anatomy is diagnostically and clinically challenging for clinicians. The most common root canal configuration of human molars is 2 roots and 3 canals, but various combinations may still exist. Third molars are known to have the most unusual anatomy among human teeth. Restorative, prosthetic, and orthodontic considerations often require endodontic treatment of third molars in order for them to be retained as functional components of the dental arch. The present case report demonstrates unusual root canal morphology of the mandibular third molar. Roentgenographic examination, which included spiral CT scan, revealed 3 separate mesial roots in tooth #48 with 3 independent canals and 3 canal orifices, indicating an endodontic rarity. The present case report puts impetus on exploration of additional canals using advanced diagnostic aids, such as spiral computed tomography, which can have a huge impact on the successful outcome of endodontic therapy. Copyright © 2013 Elsevier Inc. All rights reserved.

A new anatomically based nomenclature for the roots and root canals-part 1: maxillary molars.

PubMed

Kottoor, Jojo; Albuquerque, Denzil Valerian; Velmurugan, Natanasabapathy

2012-01-01

Numerous terminologies have been employed in the dental literature to describe the roots and root canal systems of maxillary molars. This multiplicity in naming of roots and canals makes the reader susceptible to misinterpretation and confusion. No consensus thus far has been arrived at for defining the names of roots and root canals in maxillary molars, including their various morphological aberrations. The anatomical relation of roots and their root canals were identified and were subsequently named based on definite sets of criteria. A new method for identification and naming of roots and root canal anatomy in maxillary molars, based on their root and canal relationship, was formulated and is presented in this paper. The nomenclature makes certain essential modifications to the traditional approach to accommodate naming of the various aberrations presented in the maxillary molars. A simple, yet extensive, nomenclature system has been proposed that appropriately names the internal and external morphology of maxillary molars.

Management of a maxillary first molar having atypical anatomy of two roots diagnosed using cone beam computed tomography.

PubMed

Sharma, Sarang; Mittal, Meenu; Passi, Deepak; Grover, Shibani

2015-01-01

Most often, a clinician working on maxillary first molar when anticipates an aberration thinks of an extra canal but rarely does he preempt fewer canals. Maxillary first molar is a tooth, which has been extensively reviewed with respect to its external and internal morphology. Abundant literature related to its anatomy is available, but reports on incidence of two roots and two root canals in maxillary first molar are very limited. Here, a case of maxillary first molar is presented that had two roots: one palatal root with Type I canal configuration and one bulbous fused buccal root with Type V canal configuration; a unique root and canal configuration not seen in any of the earlier reported cases. Diagnosis of root canal aberrancy and subsequently, accurate management of the tooth was greatly facilitated by cone beam computed tomography (CBCT) scan. The relevance of CBCT in improving treatment prognosis is greatly emphasized in this report.

Root canal morphology of South Asian Indian maxillary molar teeth

PubMed Central

Singh, Shishir; Pawar, Mansing

2015-01-01

Objective: The objective was to study the root canal morphology of South Asian Indian Maxillary molars using a tooth clearing technique. Materials and Methods: Hundred teeth each comprising of first, second, and third molars collected from different dental schools and clinics in India were subjected to standard dye penetration, decalcification and clearing procedure before being studied. Results: The first molar mesiobuccal roots exhibited 69% Type I, 24% Type II, 4% Type IV, 2% Type V, and 1% exhibited a Vertuccis Type VIII canal anatomy. In the group with three separate roots the second molar mesiobuccal roots in exhibited 80.6% Type I, 15.3% Type II, 2.7% Type IV, and 1.4% Type V canal anatomy while the third molars mesiobuccal roots exhibited 57.4% Type I, 32% Type II, 2.1% Type III, 8.5% Type IV, 1% had a Type V canal anatomy in the similar group. Conclusion: A varied root canal anatomy was seen in the mesiobuccal root canal of the maxillary molars. PMID:25713497

An evaluation of .06 tapered gutta-percha cones for filling of .06 taper prepared curved root canals.

PubMed

Gordon, M P J; Love, R M; Chandler, N P

2005-02-01

To compare the area occupied by gutta-percha, sealer, or void in standardized .06 tapered prepared simulated curved canals and in mesio-buccal canals of extracted maxillary first molars filled with a single .06 gutta-percha point and sealer or lateral condensation of multiple .02 gutta-percha points and sealer. Simulated canals in resin blocks with either a 30 degrees curve and radius of 10.5 mm (n = 20) or a 58 degrees curve and 4.7 mm radius (n = 20) and curved mesio-buccal canals of extracted maxillary first molars (n = 20) were prepared using .06 ProFiles in a variable tip crown-down sequence to an apical size 35 at 0.5 mm from the canal terminus or apical foramen. Ten 30 degrees and 58 degrees curved resin canals and 10 canals in the extracted teeth group were obturated with .02 taper gutta-percha cones and AH 26 sealer using lateral condensation. The time required to obturate was recorded. The remaining canals were obturated with a single .06 taper gutta-percha cone and AH 26 sealer. Excess gutta-percha was removed from the specimens using heat and the warm mass vertically condensed. Horizontal sections were cut at 0.5, 1.5, 2.5, 4.5, 7.5 and 11.5 mm from the canal terminus or apical foramen. Colour photographs were taken using an Olympus 35 mm camera attached to a stereomicroscope set at x40 magnification, and then digitized using a flatbed scanner. The cross-sectional area of the canal contents was analysed using Adobe PhotoShop. The percentage of gutta-percha, sealer or voids to the total root canal area were derived and data analysed using unpaired Student's t-test and the Mann-Whitney U-test. In the 30 degrees curved canals the levels had between 94 and 100% of the area filled with gutta-percha with no significant difference (P > 0.05) between the lateral condensation and single cone techniques. In the 58 degrees curved canals the levels had 92-99% of the area filled with gutta-percha, with the single cone technique having significantly (P < 0.05) more gutta-percha fill at the 2.5 mm level only. In the mesio-buccal canals of the teeth the levels had between 72 and 96% of the area filled with gutta-percha with no significant difference (P > 0.05) between the lateral condensation and single cone technique. The time for obturation was significantly (P < 0.05) greater for lateral condensation compared with the single cone technique in all groups. The .06 taper single cone technique was comparable with lateral condensation in the amount of gutta-percha occupying a prepared .06 tapered canal. The .06 single cone technique was faster than lateral condensation.

Experimental selective posterior semicircular canal laser deafferentation.

PubMed

Naguib, Maged B

2005-05-01

In this experimental study, we attempted to perform selective deafferentation of the posterior semicircular canal ampulla of guinea pigs using carbon dioxide laser beam. The results of this study document the efficacy of this procedure in achieving deafferentation of the posterior semicircular canal safely with regards to the other semicircular canals, the otolithic organ and the organ of hearing. Moreover, the procedure is performed with relative ease compared with other procedures previously described for selective deafferentation of the posterior semicircular canal. The clinical application of such a procedure for the treatment of intractable benign paroxysmal positional vertigo in humans is suggested.

Technical quality of a matching-taper single-cone filling technique following rotary instrumentation compared with lateral compaction after manual preparation: a retrospective study.

PubMed

Krug, R; Krastl, G; Jahreis, M

2017-03-01

The objectives of the study were to evaluate the radiographic technical quality of root canal treatment before and after the implementation of a nickel-titanium rotary (NiTiR) preparation followed by a matching-taper single-cone (mSC) obturation and to detect the procedural errors associated with this technique. A random sample of 535 patients received root canal treatment at the Department of Conservative Dentistry and Periodontology at the University of Würzburg: 254 teeth were treated in 2002-2003 by using stainless steel instruments (SSI) for preparation and a lateral compaction (LC) technique (classic group (CG)). Two hundred eighty-one teeth were root filled in 2012-2013 employing NiTiR instruments for the root canal shaping and a mSC technique (advanced group (AG)). The quality assessments were based on the radiographic criteria of the European Society of Endodontology. The presence of voids was recorded separately for the apical, central and cervical thirds of the root canals. Procedural errors, such as ledges, apical transportations, perforations and fractured instruments, were detected. The root canal fillings in the CG and AG were compared using chi-squared and Fisher's exact tests. Multivariable logistic regression was performed to investigate the association between the independent variables (patient age, tooth type and type of treatment) and the dependent variables (density and length). Adequate length was achieved significantly more often in the AG compared to the CG for molars (p = 0.017), mandibular teeth (p = 0.013) and primary root canal treatments (p = 0.024). No significant difference was detected between the AG and CG regarding adequate length in general (p = 0.051) or adequate overall quality of root canal filling (p = 0.1). In the AG, a significant decrease in procedural errors was evident (p = 0.019) and decreases in the densities of the root canal fillings in the cervical (p = 0.01) and central (p = 0.01) thirds of the root canals were also observed. Moreover, root canals in elderly patients exhibited fewer voids (p = 0.009). Rotary root canal preparation followed by a matching-taper single-cone filling technique provides a reliable shaping of the root canal, with fewer procedural errors and a more acceptable filling quality in terms of length and homogeneity in the apical third. Less favourable results were achieved in the central and cervical parts of the root canals. The matching-taper single-cone technique seems to effectively obturate well-tapered root canals after adequate rotary instrumentation. Irregularly shaped canals require additional lateral or warm vertical condensation to avoid voids.

[Influence of different ultrasonic irrigation solutions after root canal preparation with ProTaper by machine on micro-hardness of root canal dentin].

PubMed

Guo, Jiang-li; Zhang, Yan; Zhen, Lei

2015-08-01

To develope the influence of different ultrasonic irrigations after root canal preparation with nickel titanium ProTaper on micro-hardness of root canal dentin. Sixty of maxillary anterior teeth with single-canal were collected and randomly divided into 6 groups. Group A was control group, group B was prepared to F3 with nickel titanium ProTaper by machine, group C was ultrasonic irrigated with 3% hydrogen peroxide solution for 1 minute after preparation, group D was ultrasonic irrigated with koutai mouthwash for 1 minute after preparation, group E was ultrasonic irrigated with 17% EDTA solution for 1 minute after preparation, group F was ultrasonic irrigated with distilled water for 1 minute after preparation. The roots were then sectioned horizontally into 3 parts, split longitudinally into halves and examined under a micro Vickers hardness test machine. The data was analyzed by one-way ANOVA and t test with SPSS 17.0 software package. The micro-hardness of group A was (52.66 ± 1.64) HV,(52.08 ± 1.53) HV and (51.47 ± 2.53) HV. There was no significant difference in all parts of the root canal in group A (P>0.05). The micro-hardness of the apical third of root canal was lower than that of the cervical and middle of root canal in the other groups (P<0.05). In the cervical and middle third of the root canals, the micro-hardness of group E was (44.65 ± 1.33) HV and(42.55 ± 1.12) HV, and there were statistical significances between group E and the other groups (P<0.05). In the apical third of root canal,the micro-hardness of group E was (37.82 ± 1.60) HV, and group C was (44.14±1.73) HV, both of the comparative differences with other groups were statistically significant (P<0.05). There was no significant difference among group B, group D and group F (P>0.05). Root canal preparation to F3 with nickel titanium ProTaper by machine can make the micro-hardness of the apical third of root canal decrease. Ultrasonic irrigation with 17% EDTA solution for 1 minute can make the micro-hardness of the root canal decrease ultrasonic irrigation with. Ultrasonic irrigation with 3% hydrogen peroxide can make the micro-hardness of the apical third of root canal decrease. Ultrasonic irrigation with Koutai mouthwash and distilled water for 1 minute have no influence on the micro-hardness of root canal.

Bank erosion of navigation canals in the western and central Gulf of Mexico

USGS Publications Warehouse

Thatcher, Cindy A.; Hartley, Stephen B.; Wilson, Scott A.

2011-01-01

Erosion of navigation canal banks is a direct cause of land loss, but there has been little quantitative analysis to determine why certain major canals exhibit faster widening rates (indicative of erosion) than others in the coastal zones of Texas, Louisiana, Mississippi, and Alabama. We hypothesize that navigation canals exhibit varying rates of erosion based on soil properties of the embankment substrate, vegetation type, geologic region (derived from digital versions of state geologic maps), and the presence or absence of canal bank armaments (that is, rock rip-rap, concrete bulkheads, or other shoreline protection structures). The first objective of this project was to map the shoreline position and substrate along both banks of the navigation canals, which were digitized from 3 different time periods of aerial photography spanning the years of 1978/79 to 2005/06. The second objective was to quantify the erosion rates of the navigation canals in the study area and to determine whether differences in erosion rates are related to embankment substrate, vegetation type, geologic region, or soil type. To measure changes in shoreline position over time, transects spaced at 50-m (164-ft) intervals were intersected with shorelines from all three time periods, and an annual rate of change was calculated for each transect. Mean annual rates of shoreline change ranged from 1.75 m/year (5.74 ft/year) on the west side of the Atchafalaya River, La., where there was shoreline advancement or canal narrowing, to -3.29 m/year (-10.79 ft/year) on the south side of the Theodore Ship Channel, Ala., where there was shoreline retreat or erosion. Statistical analysis indicated that there were significant differences in shoreline retreat rates according to geologic region and marsh vegetation type, and a weak relationship with soil organic content. This information can be used to better estimate future land loss rates associated with navigation canals and to prioritize the location of restoration and erosion mitigation efforts. Combining all canals together, our results also showed that canal erosion rates have slowed in recent years, with an average canal widening rate of -0.99 m/year (-3.25 ft/year) for the 1996/98-2005/06 time period compared to -1.71 m/year (-5.61 ft/year) for the earlier 1978/79-1996/98 time period. Future research could focus on obtaining detailed vessel traffic information for individual canals, which is likely a factor that influences canal bank erosion rates.

Advances in endodontics: Potential applications in clinical practice

PubMed Central

Kishen, Anil; Peters, Ove A.; Zehnder, Matthias; Diogenes, Anibal R.; Nair, Madhu K.

2016-01-01

Contemporary endodontics has seen an unprecedented advance in technology and materials. This article aimed to review some of the challenges and advances in the following sections: (1) endodontic imaging, (2) root canal preparation, (3) root canal disinfection, (4) root canal filling, and (4) regenerative endodontic procedures (REPs). Jointly, these advances are aimed at improving the state of the art and science of root canal treatment. PMID:27217630

Surgical management of 2 different presentations of ear canal atresia in dogs

PubMed Central

Béraud, Romain

2012-01-01

A 6-year-old French spaniel and a 14-month-old German shepherd dog were diagnosed with ear canal atresia. Based on presentation, computed tomography, and auditory function evaluation, the first dog underwent excision of the horizontal ear canal and bulla curettage, and the second underwent re-anastomosis of the vertical canal to the external meatus. Both dogs had successful outcomes. PMID:23024390

24. View of Botany Mills Lanolin Retrieval plant site looking ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. View of Botany Mills Lanolin Retrieval plant site looking north from Andrew McLean Company Textile Mill; Botany Worsted Mills and Dundee Canal at left, Passaic River at right - Dundee Canal Industrial Historic District, Beginning at George Street in Passaic & extending north along Dundee Canal approximately 1.2 miles to Canal headgates opposite East Clifton Avenue in Clifton, Passaic, Passaic County, NJ

48. SUMMIT OF THE MORRIS CANAL, 914 FEET ABOVE MEAN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

48. SUMMIT OF THE MORRIS CANAL, 914 FEET ABOVE MEAN HIGH TIDE AT NEWARK, NEW JERSEY. TRACKS OF THE D, L & W RAILROAD CAN BE SEEN AT LEFT. EDGE OF THE LAKE HOPATCONG STATION IS ALSO VISIBLE AT LEFT. PASSENGERS AND FREIGHT COULD BE TRANSFERRED TO SMALL BOATS FOR TRANSPORT THROUGH THE FEEDER CANAL TO LAKE HOPATCONG. - Morris Canal, Phillipsburg, Warren County, NJ

Effect of Peracetic Acid as A Final Rinse on Push Out Bond Strength of Root Canal Sealers to Root Dentin.

PubMed

Gaddala, Naresh; Veeramachineni, Chandrasekhar; Tummala, Muralidhar

2015-05-01

Smear layer which was formed during the instrumentation of root canals hinders the penetration of root canal sealers to root dentin and affect the bond strength of root canal sealers to root dentin. Final irrigant such as demineralizing agents are used to remove the inorganic portion of the smear layer. In the present study, peracetic acid used as a final rinse, to effect the bond strength of root canal sealers to root dentin. The purpose of the present study was to evaluate the efficacy of peracetic acid as a final irrigant on bond strength of root canal sealers to root dentin. Sixty six freshly extracted human single rooted mandibular premolars were used for this study. After decoronation the samples were instrumented with Protaper upto F3 and irrigated with 5.25% NaOcl. The teeth were then divided into three groups based on final irrigant used: Group-1(control group) Canals were irrigated with distilled water. Group-2: Canals were irrigated with peracetic acid. Group-3: Canals were irrigated with smear clear. Each group was further divided into three subgroups (n=30) based on the sealer used to obturate the canals. Subgroup-1: kerr, Subgroup-2: Apexit plus, Subgroup-3: AH PLUS. Each sealer was mixed and coated to master cone and placed in the canal. The bonding between sealer and dentin surface was evaluated using push out bond strength by universal testing machine. The mean bond strength values of each group were statistically evaluated using Two-way ANOVA followed by Tukey post-hoc test. Significant difference was found among the bond strength of the sealers. But, there is no statistically significant difference between the groups irrigated with peracetic acid and smear clear compared to control group. AH Plus showed highest bond strength irrespective of the final irrigant used. Peracetic acid when employed as final irrigant improved the bond strength of root canal sealers compared to control group but not statistically significant than smear clear.

Effect of Peracetic Acid as A Final Rinse on Push Out Bond Strength of Root Canal Sealers to Root Dentin

PubMed Central

Gaddala, Naresh; Veeramachineni, Chandrasekhar

2015-01-01

Background Smear layer which was formed during the instrumentation of root canals hinders the penetration of root canal sealers to root dentin and affect the bond strength of root canal sealers to root dentin. Final irrigant such as demineralizing agents are used to remove the inorganic portion of the smear layer. In the present study, peracetic acid used as a final rinse, to effect the bond strength of root canal sealers to root dentin. Aim The purpose of the present study was to evaluate the efficacy of peracetic acid as a final irrigant on bond strength of root canal sealers to root dentin. Materials and Methods Sixty six freshly extracted human single rooted mandibular premolars were used for this study. After decoronation the samples were instrumented with Protaper upto F3 and irrigated with 5.25% NaOcl. The teeth were then divided into three groups based on final irrigant used: Group-1(control group) Canals were irrigated with distilled water. Group-2: Canals were irrigated with peracetic acid. Group-3: Canals were irrigated with smear clear. Each group was further divided into three subgroups (n=30) based on the sealer used to obturate the canals. Subgroup-1: kerr, Subgroup-2: Apexit plus, Subgroup-3: AH PLUS. Each sealer was mixed and coated to master cone and placed in the canal. The bonding between sealer and dentin surface was evaluated using push out bond strength by universal testing machine. The mean bond strength values of each group were statistically evaluated using Two-way ANOVA followed by Tukey post-hoc test. Results Significant difference was found among the bond strength of the sealers. But, there is no statistically significant difference between the groups irrigated with peracetic acid and smear clear compared to control group. AH Plus showed highest bond strength irrespective of the final irrigant used. Conclusion Peracetic acid when employed as final irrigant improved the bond strength of root canal sealers compared to control group but not statistically significant than smear clear. PMID:26155568

A Comparative SEM Investigation of Smear Layer Remaining on Dentinal Walls by Three Rotary NiTi Files with Different Cross Sectional Designs in Moderately Curved Canals

PubMed Central

Kakkar, Pooja; Vats, Asit

2015-01-01

Objective: The objective of this study was to compare the smear layer formed on root canal walls during canal preparation of extracted human teeth by Twisted, Mtwo, and ProTaper rotary nickel titanium instruments. Materials and Methods: Sixty single rooted human premolar teeth with root curvature <250 were selected and randomly divided into three Groups (n= 20 teeth per Group). Three types of rotary nickel titanium instruments were used, Twisted (SybronEndo, Orange, CA, USA), Mtwo (VDW, Munich, Germany) and ProTaper (Dentsply Maillefer, Ballaigues, Switzerland) according to manufacturer’s instructions to instrument the root canals. Irrigation for all groups was performed after each instrument change with 3ml of 3% sodium hypochlorite followed by Glyde (File Prep, Dentsply, Maillefer, Ballaigues, Switzerland) as chelator paste and lubricant. Three different areas (coronal, middle and apical thirds) of the root canal were evaluated using scanning electron microscopy (SEM). The canal wall of each sample was assessed and compared using a predefined scale for the presence or absence of smear layer. Data were analysed statistically using ANOVA and Tukey HSD test Results: All three groups showed statistically significant more smear layer in the apical thirds of the canal as compared to the coronal and middle thirds (p<0.001). Mtwo rotary file system produced significantly less smear layer (p<0.001) compared to Twisted and ProTaper rotary instruments in the apical portion. Twisted Files resulted in less smear layer formation in the apical thirds of the canal compared to ProTaper rotary instruments but were statistically insignificant. Conclusion: Completely clean root canals were not found after instrumentation with any of the three instruments. Under the confines of this study Mtwo instruments produced significantly cleaner dentin wall surfaces throughout the canal length in comparison to Twisted and ProTaper rotary files. Twisted Files proved to be comparable to ProTaper rotary instruments with respect to canal cleanliness in the apical thirds of the root canal. PMID:25954704

Determination of Frequency of the Second Mesiobuccal Canal in the Permanent Maxillary First Molar Teeth with Magnification Loupes (× 3.5)

PubMed Central

Hasan, Muhammad; Raza Khan, Farhan

2014-01-01

INTRODUCTION: The mesiobuccal root of the maxillary first molar has generated more research and clinical investigation than any root. An inability to detect and treat a second mesiobuccal (MB2) canal is a reason for endodontic failure in maxillary first molars. Modifications in the endodontic access and detection techniques, along with advancements in illumination and magnification technology, have aided in the location and treatment with the second mesiobuccal canal of maxillary first molars. OBJECTIVE: To determine the frequency of the second mesiobuccal canal in the permanent maxillary first molars with magnification loupes (× 3.5). MATERIALS AND METHODS: A total of 53 teeth were assessed using a moderate magnification for second mesiobuccal canal in mesiobuccal root of first permanent maxillary molars in vivo. Detection of this canal in maxillary first molars was done through a clinical access cavity preparation under magnification loupes (× 3.5). Data was analyzed using SPSS 15.0. Frequency distribution of variables was determined and the level of significance was kept at 0.05. RESULTS: We were able to detect second mesiobuccal canal in 27 out of 53 (50.9%) of the permanent maxillary first molars that were studied. It was found that the males tend to have a higher proportion of second mesiobuccal canals (up to 31%) as compared to the females in whom the second mesiobuccal canals could be identified only 19% of the time. Whilst, there was no association found between age, gender and chamber obliteration with the presence of second mesiobuccal canal. CONCLUSIONS: In conclusion, within its limitations, this study suggested that the use of magnification loupes enhanced both the detection (50.9%) and negotiation (86.8%) of the second mesiobuccal canals in the permanent maxillary first molars beyond what could be achieved with naked eye. PMID:25324702

Danger zone analysis using cone beam computed tomography after apical enlargement with K3 and K3XF in a manikin model

PubMed Central

Olivier, Juan-Gonzalo; García-Font, Marc; Gonzalez-Sanchez, Jose-Antonio; Roig-Cayon, Miguel

2016-01-01

Background The objective of the study was to evaluate and compare how apical enlargement with K3 and K3XF nickel-titanium (NiTi) rotary instruments reduces the root thickness in the danger zone and affects canal transportation and centering ability in mandibular molar mesial canals in a manikin extracted tooth model. Material and Methods Seventy-two mesial root canals of first mandibular molars were instrumented. Initial and post-instrumentation Cone Beam Computed Tomography scans were performed after root canal preparation up to size 25, 30, 35 and 40 files. Canal transportation, canal centering and remaining root dentin thickness toward the danger zone were calculated in sections 1, 2 and 3 mm under the furcation level. Data were analyzed using non-parametric Kruskal-Wallis analysis of variance at a significance level of P < 0.05. Results K3 instruments removed more dentin toward the danger zone compared with K3XF instruments (P< .05) and significant differences in dentin thickness were found when canal enlargement was performed to a #35-40 with both systems (P< 0.05). No significant differences in canal transportation and centering ability were found between systems, except when canal enlargement was performed to a #40 (P = 0,0136). No differences were observed when comparing the number of uses in both systems (P> 0.05). Conclusions Under the conditions of this study K3 removed a significant amount of dentin at the furcation level compared with the R-Phase K3XF rotary system in curved root canals. Enlargement to a 35-40/04 file removed significantly more dentin with both systems. Key words:K3, K3XF, R-phase, center ability, canal transportation, dentin thickness, increased apical enlargement, danger zone, dentin thickness. PMID:27703602

Atrioventricular Canal Defect

MedlinePlus

... birth (congenital). The condition is often associated with Down syndrome. Atrioventricular canal defect allows extra blood to flow ... baby's heart is developing. Some factors, such as Down syndrome, might increase the risk of atrioventricular canal defect. ...

[Deformation evaluation of ProTaper nickel-titanium rotary instruments in curved canals instrumentation in vitro].

PubMed

Yan, Hong; Ren, Min; Yin, Xing-Zhe; Zhao, Shu-Yan; Zhang, Cheng-Fei

2008-04-01

To evaluate the deformation of ProTaper rotary instruments using in root canals of different curvature in vitro. Extracted first mandibular molars were divided into two experimental groups according to the curvature of mesial buccal canals: group A with moderate curvature and group B with severe curvature. Only the mesial buccal canals of all these teeth were prepared with 6 sets of new ProTaper rotary instruments individually. Additionally, the control group was established with a set of new ProTaper rotary instruments. After finishing each canal preparation, the instruments accompanied by control were examined under the stereomicroscope by an inspector without knowing the group. If distortion, unwinding, abrasion or fracture occurred within one set of instruments, then the whole set was disposed. The sets without problems were in use until 30 times. After 5, 10, 20 times canal preparation, S1, F1 files without deformation under stereomicroscope were examined under scanning electron microscope (SEM). Deformation of ProTaper rotary instruments happened after 12 times in group A and after 7 times in group B. In these two experimental groups, microcracks were found increasing with the times of use under SEM in the instruments without deformation under stereomicroscope. The microcracks on tip of instruments were deep in the early use and became smoother after 10 times. Similar changes happened on knife-edge of instruments, and the microcracks extended over the edge after 20 times use. Root canals with severe curvature tend to damage ProTaper rotary instruments more frequently than moderately curved canals. ProTaper rotary instruments are appropriate to treat less than 7 root canals with severe curvature or 12 root canals with moderate curvature. Stereomicroscope is recommended to detect early damages on Ni-Ti rotary instruments, for preventing instruments fracture in clinic.

CT evaluation of canal preparation using rotary and hand NI-TI instruments: An in vitro study

PubMed Central

Nagaraja, Shruthi; Sreenivasa Murthy, B V

2010-01-01

Background: Controlled, uniformly tapered radicular preparation is a great challenge in endodontics. Improper preparation can lead to procedural errors like transportation of foramen, uneven dentine thickness, stripping of root canal, formation of ledge, zip, and elbow in curved canals. These procedural errors and their sequel can adversely affect the prognosis of treatment. Aim/Objectives: The present in vitro study aims to evaluate canal preparation based on the following factors: canal transportation, remaining dentine thickness and comparing centering ability between hand Ni-Ti K files and ProTaper rotary Ni-Ti instruments using computed tomography (CT). Materials and Methods: For evaluation, 30 mesiobuccal roots of maxillary molars were selected. Of these, 15 roots were distributed into two groups where Group 1 included hand instrumentation with Ni-Ti K-files; and Group 2 comprised ProTaper NiTi rotary system. Pre instrumentation and post instrumentation three-dimensional CT images were obtained from root cross-sections that were 1 mm thick from apex to the canal orifice; scanned images were then superimposed and compared. Result: It was observed that the manual technique using hand Ni-Ti K-file produced lesser canal transportation and maintained greater dentine thickness than the rotary ProTaper technique at middle and coronal third and this difference was statistically significant. No significant difference was seen with regard to canal transportation and remaining root dentine at apical levels. With regard to centering ratio, no significant difference was seen between both the groups at all levels. Conclusion: ProTaper should be used judiciously, especially in curved canals, as it causes higher canal transportation and thinning of root dentine at middle and coronal levels. None of the groups showed optimal centering ability. PMID:20582214

Comparison of Cleaning Efficacy and Instrumentation Time in Primary Molars: Mtwo Rotary Instruments vs. Hand K-Files.

PubMed

Ramezanali, Fatemeh; Afkhami, Farzaneh; Soleimani, Ali; Kharrazifard, Mohammad Javad; Rafiee, Farshid

2015-01-01

Pulpectomy is the preferred treatment for restorable primary teeth with symptomatic irreversible pulpitis or periradicular lesion. Considering the rather new application of rotary files for pulpectomy of primary teeth, the aim of this study was to compare the cleaning efficacy and instrumentation time of hand K-files and Mtwo rotary system for preparation of human primary molars. This experimental study was conducted on 100 extracted primary maxillary and mandibular intact molars with no resorption. Access cavities were prepared and India ink was injected into the root canal on a vibrator using an insulin syringe. Canals were then divided into 5 groups (n=20): in group I, canals were instrumented using K-files up to #25 for mesial and buccal canals and #30 for palatal and distal canals. In group II, canals were prepared using Mtwo rotary files (15/0.05, 20/0.06 and 25/0.06 for mesial and buccal canals and 15/0.05, 20/0.06, 25/0.06 and finally 30/0.05 for distal and palatal canals). In group III, root canals were only irrigated with saline. Groups IV and V were the positive and negative control groups, respectively. The time required for cleaning and preparation of the canals for each of the specimens in groups I, II and III was recorded. The mean score of cleanliness of Mtwo was not significantly different from K-file group (P>0.05). However the mean instrumentation time in Mtwo group was significantly shorter (P<0.001). Although there were no differences regarding the cleaning efficacy of either system, Mtwo rotary files were far more time efficient.

The antimicrobial effectiveness of photodynamic therapy used as an addition to the conventional endodontic re-treatment: a clinical study.

PubMed

Jurič, Ivona Bago; Plečko, Vanda; Pandurić, Dragana Gabrić; Anić, Ivica

2014-12-01

The purpose of the study was to evaluate the efficacy of antimicrobial photodynamic therapy (aPDT) used as an adjunct to the endodontic re-treatment in the eradication of microorganisms from previously filled root canals. The study sample consisted of 21 randomly selected patients with root filled and infected root canal system with chronic apical periodontitis on incisors or canines, who have had previously endodontic treatment. Microbiological samples from the root canals were collected after accessing the canal, following the endodontic re-treatment and after the aPDT procedure. During instrumentation, the root canals were irrigated with 2.5% sodium hypochlorite (NaOCl), and the final irrigation protocol included 17% ethylenediaminetetraacetic acid followed by NaOCl. Root canals were filled with a phenothiazinium chloride and irradiated with a diode laser (λ=660 nm, 100 mW) for 1 min. Microbiological samples from the root canals were cultivated on selective plates, and the identification was done by micromorphology, macromorphology and different API strips as well as bacterial counts (colony forming units). Fourteen bacteria species were isolated from the root canals initially, with a mean value of 4.57 species per canal. Although endodontic re-treatment alone produced a significant reduction in the number of bacteria species (p<0.001), the combination of endodontic treatment and aPDT was statistically more effective (p<0.001). No bacteria were cultivated from the main root canals of 11 teeth. The results indicated that the aPDT used as an adjunct to the conventional endodontic therapy achieved a significant further reduction of intracanal microbial load. Copyright © 2014 Elsevier B.V. All rights reserved.

In vitro evaluation of efficacy of different rotary instrument systems for gutta percha removal during root canal retreatment

PubMed Central

Joseph, Mercy; Malhotra, Amit; Rao, Murali; Sharma, Abhimanyu; Talwar, Sangeeta

2016-01-01

Background Complete removal of old filling material during root canal retreatment is fundamental for predictable cleaning and shaping of canal anatomy. Most of the retreatment methods tested in earlier studies have shown inability to achieve complete removal of root canal filling. Therefore the aim of this investigation was to assess the efficacy of three different rotary nickel titanium retreatment systems and Hedstrom files in removing filling material from root canals. Material and Methods Sixty extracted mandibular premolars were decoronated to leave 15 mm root. Specimen were hand instrumented and obturated using gutta percha and AH plus root canal sealer. After storage period of two weeks, roots were retreated with three (Protaper retreatment files, Mtwo retreatment files, NRT GPR) rotary retreatment instrument systems and Hedstroem files. Subsequently, samples were sectioned longitudinally and examined under stereomicroscope. Digital images were recorded and evaluated using Digital Image Analysing Software. The retreatment time was recorded for each tooth using a stopwatch. The area of canal and the residual filling material was recorded in mm2 and the percentage of remaining filling material on canal walls was calculated. Data was analysed using ANOVA test. Results Significantly less amount of residual filling material was present in protaper and Mtwo instrumented teeth (p < 0.05) compared to NRT GPR and Hedstrom files group. Protaper instruments also required lesser time during removal of filling material followed by Mtwo instruments, NRT GPR files and Hedstrom files. Conclusions None of the instruments were able to remove the filling material completely from root canal. Protaper universal retreatment system and Mtwo retreatment files were more efficient and faster compared to NRT GPR fles and Hedstrom files. Key words:Gutta-percha removal, nickel titanium, root canal retreatment, rotary instruments. PMID:27703601

Microtomography-based comparison of reciprocating single-file F2 ProTaper technique versus rotary full sequence.

PubMed

Paqué, Frank; Zehnder, Matthias; De-Deus, Gustavo

2011-10-01

A preparation technique with only 1 single instrument was proposed on the basis of the reciprocating movement of the F2 ProTaper instrument. The present study was designed to quantitatively assess canal preparation outcomes achieved by this technique. Twenty-five extracted human mandibular first molars with 2 separate mesial root canals were selected. Canals were randomly assigned to 1 of the 2 experimental groups: group 1, rotary conventional preparation by using ProTaper, and group 2, reciprocate instrumentation with 1 single ProTaper F2 instrument. Specimens were scanned initially and after root canal preparation with an isotropic resolution of 20 μm by using a micro-computed tomography system. The following parameters were assessed: changes in dentin volume, percentage of shaped canal walls, and degree of canal transportation. In addition, the time required to reach working length with the F2 instrument was recorded. Preoperatively, there were no differences regarding root canal curvature and volume between experimental groups. Overall, instrumentation led to enlarged canal shapes with no evidence of preparation errors. There were no statistical differences between the 2 preparation techniques in the anatomical parameters assessed (P > .01), except for a significantly higher canal transportation caused by the reciprocating file in the coronal canal third. On the other hand, preparation was faster by using the single-file technique (P < .01). Shaping outcomes with the single-file F2 ProTaper technique and conventional ProTaper full-sequence rotary approach were similar. However, the single-file F2 ProTaper technique was markedly faster in reaching working length. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

CT evaluation of canal preparation using rotary and hand NI-TI instruments: An in vitro study.

PubMed

Nagaraja, Shruthi; Sreenivasa Murthy, B V

2010-01-01

Controlled, uniformly tapered radicular preparation is a great challenge in endodontics. Improper preparation can lead to procedural errors like transportation of foramen, uneven dentine thickness, stripping of root canal, formation of ledge, zip, and elbow in curved canals. These procedural errors and their sequel can adversely affect the prognosis of treatment. The present in vitro study aims to evaluate canal preparation based on the following factors: canal transportation, remaining dentine thickness and comparing centering ability between hand Ni-Ti K files and ProTaper rotary Ni-Ti instruments using computed tomography (CT). For evaluation, 30 mesiobuccal roots of maxillary molars were selected. Of these, 15 roots were distributed into two groups where Group 1 included hand instrumentation with Ni-Ti K-files; and Group 2 comprised ProTaper NiTi rotary system. Pre instrumentation and post instrumentation three-dimensional CT images were obtained from root cross-sections that were 1 mm thick from apex to the canal orifice; scanned images were then superimposed and compared. It was observed that the manual technique using hand Ni-Ti K-file produced lesser canal transportation and maintained greater dentine thickness than the rotary ProTaper technique at middle and coronal third and this difference was statistically significant. No significant difference was seen with regard to canal transportation and remaining root dentine at apical levels. With regard to centering ratio, no significant difference was seen between both the groups at all levels. ProTaper should be used judiciously, especially in curved canals, as it causes higher canal transportation and thinning of root dentine at middle and coronal levels. None of the groups showed optimal centering ability.

Utilizing the GentleWave® System for Debridement of Undetected Apical Anatomy.

PubMed

Ford, Michael W

2018-03-01

Debriding and disinfecting complex anatomies within the root canal system pose a major challenge during root canal therapy. Even with current chemomechanical techniques, debris and bacterial remnants are commonly left behind, which are generally believed to increase the risk of endodontic failure. This case details the use of a new technique to debride complex apical anatomy in a maxillary molar. A 48-year-old female presented to the clinic with a chief complaint of increasing pain in her tooth. Clinical examination of the right first maxillary molar (#3) revealed moderate sensitivity to percussion and mild sensitivity to palpation. A pulpal diagnosis of symptomatic irreversible pulpitis and a periapi-cal diagnosis of symptomatic apical periodontitis were made. Mechanical instrumentation was performed using rotary file size #25/.04 for the mesiobuccal and distobuccal canals and size #25/.06 for the palatal canal to create a fluid path and enable obturation of the root canal system following the GentleWave® Procedure. The GentleWave Procedure was completed using Multisonic Ultracleaning™ for complete debridement and disinfection of the root canal system. The tooth was obturated using a warm vertical continuous wave obturation technique. Postoperative radiographs revealed complex anatomy within the apical third that was undetected both during pre-operative radiography and mechanical instrumentation. The palatal canal exhibited a complex apical delta with multiple points of exit, and the mesiobuccal canal revealed an undetected lateral canal within the apical third that had a separate and distinct egress. Conclusion and clinical significance: It is important for the clinician to debride and disinfect complex anatomy within the root canal system to reduce the risk of endodontic failure. This case report highlights the clinical significance of utilizing the GentleWave Procedure for detecting complex apical anatomy during endodontic therapy.

[Evaluation of root canal isthmus debridement efficacy of Er:YAG laser in combination with sodium hypochlorite].

PubMed

Zhou, Meng-Qi; Wang, Hao-Ming; Xiao, Jia-Qi; Hong, Jin

2016-10-01

To histologically evaluate the efficacy of sodium hypochlorite (NaClO) in combination with Er:YAG (erbium-doped yttrium aluminium garnet) laser in dissolving necrotic tissue and cleaning root canals as well as canal isthmuses. After scanned by cone-beam CT (CBCT), 50 well-prepared premolars with root canal isthmuses were selected and randomly assigned into 5 groups. They were subsequently subjected to different regimens as followed: group A-irrigated with 1% NaClO for 1 minute, group B- irradiated by Er:YAG laser at 0.5 W combined with 1% NaClO irrigation for 1 minute, group C- irradiated by Er:YAG laser at 1.0 W combined with 1% NaClO irrigation for 1 minute, group D- irradiated by Er:YAG laser at 2.0 W combined with 1% NaClO irrigation for 1 minute,group E- negative control. After histological preparation and staining, the cross-sections were evaluated for percentage of tissue removal from root canals and isthmuses. The cleanliness values were calculated using SPSS 13.0 software package. The mean percentage of root canals in group A, B, C and D was 95.24%, 96.53%、97.63% and 98.22%, respectively, and the mean percentage of isthmuses was 16.50%, 51.48%, 52.56% and 53.83%, respectively. The mean percentage of root canal and isthmus cleanliness values were significantly higher in group B, C and D (P<0.05) than that in group A. There was no significant differences of root canal and isthmus cleanliness among group B, C and D. Er:YAG laser combined with 1% NaClO irrigation may be used effectively in root canal and root canal isthmus cleanliness as a new method.

The self-adjusting file (SAF). Part 3: removal of debris and smear layer-A scanning electron microscope study.

PubMed

Metzger, Zvi; Teperovich, Ehud; Cohen, Raphaela; Zary, Raviv; Paqué, Frank; Hülsmann, Michael

2010-04-01

The aim of this study was to evaluate the cleaning ability of the Self-Adjusting File (SAF) system in terms of removal of debris and smear layer. Root canal preparations were performed in 20 root canals using an SAF operated with a continuous irrigation device. The glide path was initially established using a size 20 K-file followed by the SAF file that was operated in the root canal via a vibrating motion for a total of 4 minutes. Sodium hypochlorite (3%) and EDTA (17%) were used as continuous irrigants and were alternated every minute during this initial 4-minute period. This was followed by a 30-second rinse using EDTA applied through a nonactivated SAF and a final flush with sodium hypochlorite. The roots were split longitudinally and subjected to scanning electron microscopy (SEM). The presence of debris and a smear layer in the coronal, middle, and apical thirds of the canal were evaluated through the analysis of the SEM images using five-score evaluation systems based on reference photographs. The SAF operation with continuous irrigation, using alternating irrigants, resulted in root canal walls that were free of debris in all thirds of the canal in all (100%) of the samples. In addition, smear layer-free surfaces were observed in 100% and 80% of the coronal and middle thirds of the canal, respectively. In the apical third of the canal, smear layer-free surfaces were found in 65% of the root canals. The operation of the SAF system with continuous irrigation coupled with alternating sodium hypochlorite and EDTA treatment resulted in a clean and mostly smear layer-free dentinal surface in all parts of the root canal. Copyright (c) 2010 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Comparison of air-driven vs electric torque control motors on canal centering ability by ProTaper NiTi rotary instruments.

PubMed

Zarei, Mina; Javidi, Maryam; Erfanian, Mahdi; Lomee, Mahdi; Afkhami, Farzaneh

2013-01-01

Cleaning and shaping is one of the most important phases in root canal therapy. Various rotary NiTi systems minimize accidents and facilitate the shaping process. Todays NiTi files are used with air-driven and electric handpieces. This study compared the canal centering after instrumentation using the ProTaper system using Endo IT, electric torque-control motor, and NSK air-driven handpiece. This ex vivo randomized controlled trial study involved 26 mesial mandibular root canals with 10 to 35° curvature. The roots were randomly divided into 2 groups of 13 canals each. The roots were mounted in an endodontic cube with acrylic resin, sectioned horizontally at 2, 6 and 10 mm from the apex and then reassembled. The canals were instrumented according to the manufacturer's instructions using ProTaper rotary files and electric torque-control motors (group 1) or air-driven handpieces (group 2). Photographs of the cross-sections included shots before and after instrumentation, and image analysis was performed using Photoshop software. The centering ability and canal transportation was also evaluated. Repeated measurement and independent t-test provided statistical analysis of canal transportation. The comparison of the rate of transportation toward internal or external walls between the two groups was not statistically significant (p = 0.62). Comparison of the rate of transportation of sections within one group was not significant (p = 0.28). Use of rotary NiTi file with either electric torquecontrol motor or air-driven handpiece had no effect on canal centering. NiTi rotary instruments can be used with air-driven motors without any considerable changes in root canal anatomy, however it needs the clinician to be expert.

Streamflow and water-quality data for Lake Purdy and its tributaries, Jefferson and Shelby Counties, Alabama, water years 1987-91

USGS Publications Warehouse

Stricklin, V.E.

1993-01-01

An investigation was begun in North Carolina in 1988 to: (1) quantify nutrient, sediment, and freshwater loadings in canals that collect drainage from cropland field ditches; (2) determine the effects of tide gates and flashboard risers on these loadings and on receiving-water quality; and (3) characterize the effects of drainage on the salinity regime of a tidal creek. Data were collected in three canals in Hyde County, three canals in Beaufort County, and in Campbell Creek, which receives drainage directly from two of the Beaufort County canals. Water-control structures were placed on two of the six canals near the beginning of the investigation. Following about 2 years of data collection, control structures were placed on the remaining four canals. Hydrologic and water-quality data are presented for each of the study sites for the period of October 1990 through May 1992. Data presented in this report cover the second phase of the investigation after the installation of water-control structures in the six drainage canals. Following a description of the study sites and data-collection methods, data are presented for five of the drainage canals and Campbell Creek. Data collection was discontinued at one of the Beaufort County sites after the first phase of the investigation. The data collected include: (1) daily values of accumulated precipitation; (2) water-level statistics; (3) daily mean values of discharge in the canals; (4) biweekly water-quality measurements and sample analyses; (5) storm-event water-quality measurements and sample analyses; (6) continuous records of specific conductance in the canals; (7) vertical profiles of salinity in Campbell Creek; and (8) daily mean values of salinity at five sites in Campbell Creek.

Influence of NiTi alloy on the root canal shaping capabilities of the ProTaper Universal and ProTaper Gold rotary instrument systems.

PubMed

Duque, Jussaro Alves; Vivan, Rodrigo Ricci; Cavenago, Bruno Cavalini; Amoroso-Silva, Pablo Andrés; Bernardes, Ricardo Affonso; Vasconcelos, Bruno Carvalho de; Duarte, Marco Antonio Hungaro

2017-01-01

This study aimed to evaluate the influence of the NiTi wire in Conventional NiTi (ProTaper Universal PTU) and Controlled Memory NiTi (ProTaper Gold PTG) instrument systems on the quality of root canal preparation. Twelve mandibular molars with separate mesial canals were scanned using a high-definition microcomputed tomography system. The PTU and PTG instruments were used to shape twelve mesial canals each. The canals were scanned after preparation with F2 and F3 instruments of the PTU and PTG systems. The analyzed parameters included the remaining dentin thickness at the apical and cervical levels, root canal volume and untouched canal walls. Data was analyzed for statistical significance by the Friedman and Dunn's tests. For the comparison of data between groups, the Mann-Whitney test was used. In the pre-operative analysis, there were no statistically significant differences between the groups in terms of the area and volume of root canals (P>.05). There was also no statistically significant difference between the systems with respect to root canal volume after use of the F2 and F3 instruments. There was no statistical difference in the dentin thickness at the first apical level between, before and after instrumentation for both systems. At the 3 cervical levels, the PTG maintained centralization of the preparation on the transition between the F2 and F3 instruments, which did not occur with the PTU. Conclusion The Conventional NiTi (PTU) and Controlled Memory NiTi (PTG) instruments displayed comparable capabilities for shaping the straight mesial root canals of mandibular molars, although the PTG was better than the PTU at maintaining the centralization of the shape in the cervical portion.

[Comparison of effectiveness and safety between Twisted File technique and ProTaper Universal rotary full sequence based on micro-computed tomography].

PubMed

Chen, Xiao-bo; Chen, Chen; Liang, Yu-hong

2016-02-18

To evaluate the efficacy and security of two type of rotary nickel titanium system (Twisted File and ProTaper Universal) for root canal preparation based on micro-computed tomography(micro-CT). Twenty extracted molars (including 62 canals) were divided into two experimental groups and were respectively instrumented using Twisted File rotary nickel titanium system (TF) and ProTaper Universal rotary nickel titanium system (PU) to #25/0.08 following recommended protocol. Time for root canal instrumentation (accumulation of time for every single file) was recorded. The 0-3 mm root surface from apex was observed under an optical stereomicroscope at 25 × magnification. The presence of crack line was noted. The root canals were scanned with micro-CT before and after root canal preparation. Three-dimensional shape images of canals were reconstructed, calculated and evaluated. The amount of canal central transportation of the two groups was calculated and compared. The shorter preparation time [(0.53 ± 0.14) min] was observed in TF group, while the preparation time of PU group was (2.06 ± 0.39) min (P<0.05). In mid-root level, TF group shaping resulted in less canal center transportation than PU group [(0.070 ± 0.056) mm vs. (0.097 ± 0.084) mm, P<0.05]. No instrument separation was observed in both the groups. Cracks were not found in both the groups either based in micro-CT images or observation under an optical stereomicroscope at 25 × magnification. Compared with ProTaper Universal, Twisted File took less time in root canal preparation and exhibited better shaping ability, and less canal transportation.

[In vitro study of shaping ability of single-file techniques in curved canals].

PubMed

Zeng, Yajie; Gu, Lisha; Cai, Yanling; Chen, Dian; Wei, Xi

2014-11-01

To compare the shaping quality in curved canals of two single-file technique systems with other two traditional full-sequential systems. Eighty mature molar canals with the curvature between 20 and 45 degrees were randomly divided into four groups. Specimens in each group were prepared to size 25 at working length using A (Reciproc), B (OneShape), C (MTwo) and D (Revo S), respectively. Each canal was scanned by micro-computed tomography before and after preparation. Parameters including changes in dentine volume, percentage of uninstrumented area, degree and tendency of transportation were analyzed. The operating time was also recorded. In full canal length, there was no difference in canal dentine removal, instrumented percentage and transportation degree among four groups (P > 0.05). In the apical 4 mm region, group A removed more dentine [(2.14±0.76) mm(2) of canal surface area and (0.38 ± 0.15) mm(3) of canal volume] than groups B and C(P < 0.05). At 1 mm level, median of transportation degree of group A was 0.05 (0.03)mm, which was smaller than other groups (P < 0.05). Groups A and B took (86.3±24.6) s and (85.9±21.3) s, while groups C and D took (147.4±28.3) s and (126.3±27.7) s srespectively to finish preparation. Single file techniques were significantly faster than the two full-sequential systems (P < 0.01). Compared with the continuous rotary systems, the reciprocating single-file system A showed better apical shaping ability. Both single-file techniques were more efficient than full-sequential systems for curved canal preparation. Single-file techniques appear to be the effective and efficient method for curved canal preparation.

The effectiveness of increased apical enlargement in reducing intracanal bacteria.

PubMed

Card, Steven J; Sigurdsson, Asgeir; Orstavik, Dag; Trope, Martin

2002-11-01

It has been suggested that the apical portion of a root canal is not adequately disinfected by typical instrumentation regimens. The purpose of this study was to determine whether instrumentation to sizes larger than typically used would more effectively remove culturable bacteria from the canal. Forty patients with clinical and radiographic evidence of apical periodontitis were recruited from the endodontic clinic. Mandibular cuspids (n = 2), bicuspids (n = 11), and molars (mesial roots) (n = 27) were selected for the study. Bacterial sampling was performed upon access and after each of two consecutive instrumentations. The first instrumentation utilized 1% NaOCI and 0.04 taper ProFile rotary files. The cuspid and bicuspid canals were instrumented to a #8 size and the molar canals to a #7 size. The second instrumentation utilized LightSpeed files and 1% NaOCl irrigation for further enlargement of the apical third. Typically, molars were instrumented to size 60 and cuspid/bicuspid canals to size 80. Our findings show that 100% of the cuspid/bicuspid canals and 81.5% of the molar canals were rendered bacteria-free after the first instrumentation sizes. The molar results improved to 89% after the second instrumentation. Of the (59.3%) molar mesial canals without a clinically detectable communication, 93% were rendered bacteria-free with the first instrumentation. Using a Wilcoxon rank sum test, statistically significant differences (p < 0.0001) were found between the initial sample and the samples after the first and second instrumentations. The differences between the samples that followed the two instrumentation regimens were not significant (p = 0.0617). It is concluded that simple root canal systems (without multiple canal communications) may be rendered bacteria-free when preparation of this type is utilized.

Cutaneous Sinus Tract from Mandibular Second Molar with C-shaped Canal System and Improper Former Root Canal Treatment: A Case Report.

PubMed

Gharechahi, Maryam; Dastmalchi, Parisa

2016-01-01

Here, we report the diagnosis and treatment of an extraoral cutaneous sinus tract originating in a mandibular second molar with a C-shaped root canal system. The patient was referred to our department by a dermatologist after a series of unsuccessful treatments, including antibiotics. Diffuse radiolucency on a preoperative radiograph revealed that earlier root canal treatment had been only partially successful. Consequently, we performed retreatment of the root canal comprising removal of the former restoration and gutta-percha, cleaning and shaping, and passive irrigation with sodium hypochlorite. The patient responded well, and the cutaneous lesion completely resolved uneventfully within 1 month postoperatively. Preoperative recognition and thorough knowledge of the root canal anatomy and conventional methods of obturation are necessary in performing successful endodontic treatment.

Ex vivo accuracy of an apex locator using digital signal processing in primary teeth.

PubMed

Leonardo, Mário Roberto; da Silva, Lea Assed Bezerra; Nelson-Filho, Paulo; da Silva, Raquel Assed Bezerra; Lucisano, Marília Pacífico

2009-01-01

The purpose of this study was to evaluate ex vivo the accuracy an electronic apex locator during root canal length determination in primary molars. One calibrated examiner determined the root canal length in 15 primary molars (total=34 root canals) with different stages of root resorption. Root canal length was measured both visually with the placement of a K-file 1 mm short of the apical foramen or the apical resorption bevel, and electronically using an electronic apex locator (Digital Signal Processing). Data were analyzed statistically using the intraclass correlation (ICC) test. Comparing the actual and electronic root canal length measurements in the primary teeth showed a high correlation (ICC=0.95). The Digital Signal Processing apex locator is useful and accurate for apex foramen location during root canal length measurement in primary molars.

Thermal effects and antibacterial properties of energy levels required to sterilize stained root canals with an Nd:YAG laser.

PubMed

Ramsköld, L O; Fong, C D; Strömberg, T

1997-02-01

Thermal effects and antibacterial properties of an Nd:YAG laser were studied to establish clinically safe levels of energy to deliver into the root canal and to determine the energy level needed to sterilize infected root canals. The results indicate that lasing cycles of 3 J-s for 15 s followed by a 15-s recovery interval can be continued for prolonged periods without risk of thermal damage to surrounding tissues. In vitro lasing of root canals inoculated with dark stained bacteria showed that two such lasing cycles sterilized only two out of eight canals, whereas when four cycles were used seven out of eight canals were sterilized. Guidelines for energy levels in endodontic Nd:YAG laser work are discussed, and base data for calculating appropriate energy levels are given.

In-depth morphological study of mesiobuccal root canal systems in maxillary first molars: review

PubMed Central

Chang, Seok-Woo; Lee, Jong-Ki; Lee, Yoon

2013-01-01

A common failure in endodontic treatment of the permanent maxillary first molars is likely to be caused by an inability to locate, clean, and obturate the second mesiobuccal (MB) canals. Because of the importance of knowledge on these additional canals, there have been numerous studies which investigated the maxillary first molar MB root canal morphology using in vivo and laboratory methods. In this article, the protocols, advantages and disadvantages of various methodologies for in-depth study of maxillary first molar MB root canal morphology were discussed. Furthermore, newly identified configuration types for the establishment of new classification system were suggested based on two image reformatting techniques of micro-computed tomography, which can be useful as a further 'Gold Standard' method for in-depth morphological study of complex root canal systems. PMID:23493453

Reciprocating vs Rotary Instrumentation in Pediatric Endodontics: Cone Beam Computed Tomographic Analysis of Deciduous Root Canals using Two Single-file Systems.

PubMed

Prabhakar, Attiguppe R; Yavagal, Chandrashekar; Dixit, Kratika; Naik, Saraswathi V

2016-01-01

Primary root canals are considered to be most challenging due to their complex anatomy. "Wave one" and "one shape" are single-file systems with reciprocating and rotary motion respectively. The aim of this study was to evaluate and compare dentin thickness, centering ability, canal transportation, and instrumentation time of wave one and one shape files in primary root canals using a cone beam computed tomographic (CBCT) analysis. This is an experimental, in vitro study comparing the two groups. A total of 24 extracted human primary teeth with minimum 7 mm root length were included in the study. Cone beam computed tomographic images were taken before and after the instrumentation for each group. Dentin thickness, centering ability, canal transportation, and instrumentation times were evaluated for each group. A significant difference was found in instrumentation time and canal transportation measures between the two groups. Wave one showed less canal transportation as compared with one shape, and the mean instrumentation time of wave one was significantly less than one shape. Reciprocating single-file systems was found to be faster with much less procedural errors and can hence be recommended for shaping the root canals of primary teeth. How to cite this article: Prabhakar AR, Yavagal C, Dixit K, Naik SV. Reciprocating vs Rotary Instrumentation in Pediatric Endodontics: Cone Beam Computed Tomographic Analysis of Deciduous Root Canals using Two Single-File Systems. Int J Clin Pediatr Dent 2016;9(1):45-49.

Microorganism penetration in dentinal tubules of instrumented and retreated root canal walls. In vitro SEM study

PubMed Central

Al-Sulaiman, Alaa; Al-Rasheed, Fellwa; Alnajjar, Fatimah; Al-Abdulwahab, Bander; Al-Badah, Abdulhakeem

2014-01-01

Objectives This in vitro study aimed to investigate the ability of Candida albicans (C. albicans) and Enterococcus faecalis (E. faecalis) to penetrate dentinal tubules of instrumented and retreated root canal surface of split human teeth. Materials and Methods Sixty intact extracted human single-rooted teeth were divided into 4 groups, negative control, positive control without canal instrumentation, instrumented, and retreated. Root canals in the instrumented group were enlarged with endodontic instruments, while root canals in the retreated group were enlarged, filled, and then removed the canal filling materials. The teeth were split longitudinally after canal preparation in 3 groups except the negative control group. The teeth were inoculated with both microorganisms separately and in combination. Teeth specimens were examined by scanning electron microscopy (SEM), and the depth of penetration into the dentinal tubules was assessed using the SMILE view software (JEOL Ltd). Results Penetration of C. albicans and E. faecalis into the dentinal tubules was observed in all 3 groups, although penetration was partially restricted by dentin debris of tubules in the instrumented group and remnants of canal filling materials in the retreated group. In all 3 groups, E. faecalis penetrated deeper into the dentinal tubules by way of cell division than C. albicans which built colonies and penetrated by means of hyphae. Conclusions Microorganisms can easily penetrate dentinal tubules of root canals with different appearance based on the microorganism size and status of dentinal tubules. PMID:25383343

Apical and root canal space sealing abilities of resin and glass ionomer-based root canal obturation systems.

PubMed

Royer, Kinga; Liu, Xue Jun; Zhu, Qiang; Malmstrom, Hans; Ren, Yan-Fang

2013-01-01

To investigate the apical sealing ability of glass ionomer and resin-based root canal obturation systems in comparison to a conventional vertical compaction of warm guttapercha. Forty-five extracted human teeth were randomly assigned into 3 groups of 15 each: a resin-based (EndoRez), a glass ionomer-based (Activ GP), and a conventional gutta-percha plus pulp sealer obturation system (GP/EWT). Apical and root canal space sealing abilities were assessed on five cross-sections 1.0 mm apart starting from the apex. Cross-section images were analysed using a focus-variation 3D scanning microscope and unsealed space was calculated as the percentage of total root canal space occupied by voids and debris. EndoRez had significantly higher rate of apical leakage and deeper dye penetration as compared to GP/EWT and Activ GP. EndoRez group had also more voids and debris (22.5%) in the root canal spaces as compared to GP/EWT (10.5%) and Activ GP (10.8%). Apical leakages occurred not only along the root canal walls, but also along the gutta-percha cones with EndoRez as a result of significant polymerisation shrinkage of the resin sealer. Resin-based EndoRez did not form an adequate apical seal of filled root canals. Glass ionomer-based Activ GP was comparable to a vertical compaction of warm guttapercha plus EWT sealer in sealing root canal spaces.

Interaction of Aquifer and River-Canal Network near Well Field.

PubMed

Ghosh, Narayan C; Mishra, Govinda C; Sandhu, Cornelius S S; Grischek, Thomas; Singh, Vikrant V

2015-01-01

The article presents semi-analytical mathematical models to asses (1) enhancements of seepage from a canal and (2) induced flow from a partially penetrating river in an unconfined aquifer consequent to groundwater withdrawal in a well field in the vicinity of the river and canal. The nonlinear exponential relation between seepage from a canal reach and hydraulic head in the aquifer beneath the canal reach is used for quantifying seepage from the canal reach. Hantush's (1967) basic solution for water table rise due to recharge from a rectangular spreading basin in absence of pumping well is used for generating unit pulse response function coefficients for water table rise in the aquifer. Duhamel's convolution theory and method of superposition are applied to obtain water table position due to pumping and recharge from different canal reaches. Hunt's (1999) basic solution for river depletion due to constant pumping from a well in the vicinity of a partially penetrating river is used to generate unit pulse response function coefficients. Applying convolution technique and superposition, treating the recharge from canal reaches as recharge through conceptual injection wells, river depletion consequent to variable pumping and recharge is quantified. The integrated model is applied to a case study in Haridwar (India). The well field consists of 22 pumping wells located in the vicinity of a perennial river and a canal network. The river bank filtrate portion consequent to pumping is quantified. © 2014, National GroundWater Association.

Influence of apical patency and filling material on healing process of dogs' teeth with vital pulp after root canal therapy.

PubMed

Holland, Roberto; Sant'Anna Júnior, Arnaldo; Souza, Valdir de; Dezan Junior, Eloi; Otoboni Filho, José Arlindo; Bernabé, Pedro Felício Estrada; Nery, Mauro Juvenal; Murata, Sueli Satomi

2005-01-01

The purpose of this study was to investigate the periapical healing process of dogs' teeth with or without apical patency and after root canal filling with two types of sealers. Forty roots of premolars and incisors were utilized. The root canals were over-instrumented and dressed with a corticosteroid-antibiotic solution for 7 days to obtain ingrowth of periapical connective tissue into the canals. After this period, the tissue was removed in half of the specimens (groups with patency) and preserved in the other half (groups without patency). Canals were filled by lateral condensation technique with gutta-percha points and either a calcium hydroxide-based sealer (Sealer Plus) or a Grossman's cement (Fill Canal). The animals were killed by anesthetic overdose 60 days after the endodontic treatment and anatomic pieces were obtained and prepared for histologic examination. Data were evaluated in a blind analysis on the basis of several histomorphologic parameters. The groups without patency had better results (p=0.01) than those in which the ingrown connective tissue was removed. Comparing the sealers, Sealer Plus had significantly better results (p=0.01) than Fill Canal. In conclusion, both the apical patency (presence or absence) and the type of root canal filling material influenced the periapical healing process in dogs' teeth with vital pulp after root canal treatment. The use of a calcium hydroxide-based sealer in teeth without apical patency yielded the best results among the experimental conditions proposed.

Accuracy of conventional radiography and computed tomography in predicting implant position in relation to the vertebral canal in dogs.

PubMed

Hettlich, Bianca F; Fosgate, Geoffrey T; Levine, Jonathan M; Young, Benjamin D; Kerwin, Sharon C; Walker, Michael; Griffin, Jay; Maierl, Johann

2010-08-01

To compare the accuracy of radiography and computed tomography (CT) in predicting implant position in relation to the vertebral canal in the cervical and thoracolumbar vertebral column. In vitro imaging and anatomic study. Medium-sized canine cadaver vertebral columns (n=12). Steinmann pins were inserted into cervical and thoracolumbar vertebrae based on established landmarks but without predetermination of vertebral canal violation. Radiographs and CT images were obtained and evaluated by 6 individuals. A random subset of pins was evaluated for ability to distinguish left from right pins on radiographs. The ability to correctly identify vertebral canal penetration for all pins was assessed both on radiographs and CT. Spines were then anatomically prepared and visual examination of pin penetration into the canal served as the gold standard. Left/right accuracy was 93.1%. Overall sensitivity of radiographs and CT to detect vertebral canal penetration by an implant were significantly different and estimated as 50.7% and 93.4%, respectively (P<.0001). Sensitivity was significantly higher for complete versus partial penetration and for radiologists compared with nonradiologists for both imaging modalities. Overall specificity of radiographs and CT to detect vertebral canal penetration was 82.9% and 86.4%, respectively (P=.049). CT was superior to radiographic assessment and is the recommended imaging modality to assess penetration into the vertebral canal. CT is significantly more accurate in identifying vertebral canal violation by Steinmann pins and should be performed postoperatively to assess implant position.

Shaping ability of 4 different single-file systems in simulated S-shaped canals.

PubMed

Saleh, Abdulrahman Mohammed; Vakili Gilani, Pouyan; Tavanafar, Saeid; Schäfer, Edgar

2015-04-01

The aim of this study was to compare the shaping ability of 4 different single-file systems in simulated S-shaped canals. Sixty-four S-shaped canals in resin blocks were prepared to an apical size of 25 using Reciproc (VDW, Munich, Germany), WaveOne (Dentsply Maillefer, Ballaigues, Switzerland), OneShape (Micro Méga, Besançon, France), and F360 (Komet Brasseler, Lemgo, Germany) (n = 16 canals/group) systems. Composite images were made from the superimposition of pre- and postinstrumentation images. The amount of resin removed by each system was measured by using a digital template and image analysis software. Canal aberrations and the preparation time were also recorded. The data were statistically analyzed by using analysis of variance, Tukey, and chi-square tests. Canals prepared with the F360 and OneShape systems were better centered compared with the Reciproc and WaveOne systems. Reciproc and WaveOne files removed significantly greater amounts of resin from the inner side of both curvatures (P < .05). Instrumentation with OneShape and Reciproc files was significantly faster compared with WaveOne and F360 files (P < .05). No instrument fractured during canal preparation. Under the conditions of this study, all single-file instruments were safe to use and were able to prepare the canals efficiently. However, single-file systems that are less tapered seem to be more favorable when preparing S-shaped canals. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

82. CANAL WEST OF LOCK 12 EAST NEAR BOONTON. STORAGE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

82. CANAL WEST OF LOCK 12 EAST NEAR BOONTON. STORAGE BUILDING AND CHUTE ON LEFT SIDE OF CANAL MAY BE A COAL FACILITY. COAL WOULD BE UNLOADED FROM THE BOAT AND PASSED UP THE CHUTE INTO THE COAL STORAGE BIN. COAL COULD THEN BE LOADED INTO WAGONS FROM THE BOTTOM OF THE BIN ON THE OPPOSITE SIDE OF THE STRUCTURE WHEN NECESSARY. - Morris Canal, Phillipsburg, Warren County, NJ

Final Environmental Assessment for Maintaining the Rim Canal at Avon Park Air Force Range, Florida

DTIC Science & Technology

2011-02-01

Alternative would improve safety by more efficiently draining water off the runways and taxiways. Soil disturbance within the canal would temporarily...taxiways. Soil disturbance within the canal would temporarily attract foraging birds and increase the BASH hazard. The mulch and sediment mixture placed...maintain the canal. The Preferred Alternative would improve safety by more efficiently draining water off the runways and taxiways. Soil

Distributed control at Love canal

DOE Office of Scientific and Technical Information (OSTI.GOV)

McPherson, G.; Rider, G.J.; Sadowski, B.

Love Canal is known worldwide as the site of one of the worst non-nuclear environmental disasters in modern history. For 12 years, a Niagara Falls, New York chemical company used the canal bed as a chemical dump. This article discusses the computerized control of equipment used to remove the toxic materials from the ground under Love Canal, and how the minimization of maintenance is reducing maintenance costs and increasing operator safety.

Anomaly of the facial canal in a Mondini malformation with recurrent meningitis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtin, H.D.; Vignaud, J.; Bar, D.

1982-07-01

A patient with recurrent meningitis and congenital hearing loss was evaluated with tomography and metrizamide cisternography. Tomography showed an aberrant first portion of the facial nerve canal, while on cisternography, communication between the internal auditory canal and the dilated labyrinthine remnant was evident. The authors describe the radiographic findings and their significance and propose a mechanism for the formation of the anomalous facial nerve canal.

The Ohio & Erie Canal: Catalyst of Economic Development for Ohio. Teaching with Historic Places.

ERIC Educational Resources Information Center

Ayers, Deborah

In the 19th century, canal boats pulled along by mules carried much cargo. The canal boat was the family business, their livelihood, and their home. In Ohio, these boats glided gracefully along the Ohio and Erie Canal, heavily laden with lumber on its way north to Lake Erie where it was transferred to a lake freighter and sent to Buffalo (New…

Mechanized instrumentation of root canals oscillating systems.

PubMed

Leonardo, Renato de Toledo; Puente, Carlos Garcia; Jaime, Alejandro; Jent, Carol

2013-01-01

Cleaning and shaping are important steps in the root canal treatment. Despite the technological advances in endodontics, K and Hedstroen files are still widely used. In an attempt to be more effective in preparing the root canals, faster and more cutting efficient kinematic, alloys and design alternatives utilizing mechanically oscillating or rotary files are proposed. Even with all these technological innovating alternatives, the preparation of root canals remains a challenge.

10. EAST SIDE CANAL Photographic copy of historic photo, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. EAST SIDE CANAL - Photographic copy of historic photo, December 3, 1940 (original print in '1940 Annual Report of the Carlsbad Project,' located at the Carlsbad Irrigation District offices, Carlsbad, New Mexico) photographer unknown 'LOOKING DOWN FROM STA. #22 LATERAL #8, EAST CANAL. AFTER CCC ENROLLEES FINISHED ROCK LINING' - Carlsbad Irrigation District, East Side Canal, 1 mile North to 2 miles East of Carlsbad, Carlsbad, Eddy County, NM

9. EAST SIDE CANAL Photographic copy of historic photo, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. EAST SIDE CANAL - Photographic copy of historic photo, September 17, 1940 (original print in '1940 Annual Report of the Carlsbad Project,' located at the Carlsbad Irrigation District offices, Carlsbad, New Mexico) photographer unknown 'CCC ENROLLEES STARTING EXCAVATION FOR ROCK LINING DOWNSTREAM FROM STA. 22. EAST CANAL, LAT. #8' - Carlsbad Irrigation District, East Side Canal, 1 mile North to 2 miles East of Carlsbad, Carlsbad, Eddy County, NM

[Distribution of sediment iron of the ditch system in Sanjiang Plain, northeast China].

PubMed

Zou, Yuan-Chun; Lü, Xian-Guo; Jiang, Ming; Xi, Min

2009-03-15

The iron distribution of the multi-level ditch system (hair canal-field canal-lateral canal-branch canal-main canal) was studied through total iron determination of the sediments (0-60 cm). The results showed that the mean concentration was (3.02 +/- 0.10) x 10(4) mg x kg(-1). Extremely significant difference was obseved between different ditch level (F = 6.261, p < 0.001), and the highest and the lowest concentration were present in the farmland lateral canal (3.71 x 10(4) mg x kg(-1)) and wetland canal (2.43 x 10(4) mg x kg(-1)), respectively. The difference of different sediment layers was not significant (F = 0.093, p = 0.693), while the iron concentrations of 0-10 cm and 10-20 cm sediments were 51.96% and 62.22% higher than that of the natural wetland soil nearby, respectively. Iron can transfer with the runoff in a certain extent, but it was not cumulated along the ditch system with the largest cumulation location at the third level. The runoff containing iron decreased gradully because of the wetland protection and climate change nowadays. The horizontal transfer of iron along the ditch system indicated the timing and intensity of iron loss in the past since the canals were dredged.

Undergraduate students introduction to manual and rotary root canal instrumentation.

PubMed

Leonardi, Denise Piotto; Haragushiku, Gisele Aihara; Tomazinho, Flavia Sens Fagundes; Furuse, Adilson Yoshio; Volpato, Lusiane; Baratto-Filho, Flares

2012-01-01

The aim of this study was to evaluate the performance of undergraduates in their first contact with manual and rotary root canal instrumentation. Forty-two students who had never worked on a root canal before instrumented 42 extracted lower-incisors. Participants were assigned to one of two groups: Rotary instrumentation or manual instrumentation. Pre- and post-operative computed tomography scans were obtained with a 3-dimensional dental imaging system. Starting and finishing times of preparation were recorded. The cross-sectional area of the root canal was analyzed with 2-mm-below-the-apex initial and final transverse images recorded through a digital imaging system and analyzed with software to measure the initial and final area of the root canal in mm(2). Data from the cross-sectional area of the root canal and time spent were subjected to the Mann-Whitney's U-test (p<0.05). The rotary instrumentation group showed smaller time for preparation (p=0.0204). No differences between rotary and manual instrumentation regarding the cross-sectional area of the root canal were observed (p=0.25). No accidents occurred. Undergraduate students showed good performance in their first contact with the manual and rotary instrumentation with regard to time spent and cross-sectional area of the root canal, with no operative accidents.

Micro-computed tomography evaluation of the preparation of mesiobuccal root canals in maxillary first molars with Hyflex CM, Twisted Files, and K3 instruments.

PubMed

Zhao, Dan; Shen, Ya; Peng, Bin; Haapasalo, Markus

2013-03-01

The aim of this study was to describe the canal shaping properties of Hyflex CM, Twisted Files (TF), and K3 rotary nickel-titanium files by using micro-computed tomography in maxillary first molars. A total of 36 mesiobuccal root canals of maxillary first molars were prepared with Hyflex CM, TF, or K3 system. Micro-computed tomography was used to scan the specimens before and after instrumentation. The volume of untreated canal, volume of dentin removed after preparation, amount of uninstrumented area, and the transportation for the coronal, middle, and apical thirds of canals were measured. Instrumentation of canals increased their volume and surface area. TF group showed the greatest amount of volumetric dentin removal (P < .05), whereas no significant difference was found in Hyflex CM and K3 groups. There were no significant differences among instrument types concerning uninstrumented area. The TF system produced significantly less transportation than the K3 system in the apical third of canals. No significant difference was found between TF and Hyflex CM instruments relating to apical transportation. In vitro, Hyflex and TF instruments shaped curved root canals in maxillary first molar without significant shaping errors. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.

Surface modification of tooth root canal after application of an X-ray opaque waveguide

NASA Astrophysics Data System (ADS)

Dostálová, T.; Jelínková, H.; Šulc, J.; Němec, M.; Koranda, P.; Bartoňová, M.; Radina, P.; Miyagi, M.; Shi, Y.-W.; Matsuura, Y.

The interest in endodontic use of dental laser systems has been increasing. With the development of thin and flexible delivery systems for various wavelengths, laser applications in endodontics may become even more desirable. The aim of this study is to check the X-ray opacity of a hollow waveguide and to observe the results after laser root canal treatment. The root canal systems of 10 molars were treated endodontically by laser. For the laser radiation source, an Er:YAG laser system generating a wavelength of 2940 nm and an Alexandrite laser system generating a wavelength of 375 nm were used. The hollow waveguide used was checked under X-ray . A root canal surface treated by laser radiation was analyzed by a scanning electron microscope (SEM). The special hollow glass waveguide used was visible in the root canal system under X-ray imaging. Surface modification of the root canal after laser treatment was not found. After conventional treatment the root canal was enlarged. The surface was covered with a smear layer. After application of both laser systems, the smear layer was removed. The resulting canal surface was found to be clean and smooth. Under SEM observation open dentinal tubules were visible. No cracks were present, nor were surface modifications observed.

Characterization of water pollution in drainage networks using continuous monitoring data in the Citadel area of Hue City, Vietnam.

PubMed

Nagano, Y; Teraguchi, T; Lieu, P K; Furumai, H

2014-01-01

In the Citadel area of Hue City, drainage systems that include canals and ponds are considerable sources of fecal contaminants to inundated water during the rainy season because canals and ponds receive untreated wastewater. It is important to investigate the characteristics of hydraulics and water pollution in canals and ponds. At the canals and ponds, water sampling was conducted during dry and wet weather periods in order to evaluate fecal contamination and to investigate changes in water pollution caused by runoff inflow. Inundated water was also collected from streets during heavy rainfall. At the canals and ponds, concentrations of Escherichia coli and total coliform exceeded the Vietnamese regulation values for surface water in 23 and 24 out of 27 samples (85 and 89%), respectively. The water samples were categorized based on the characteristics of water pollution using cluster analysis. In the rainy season, continuous monitoring was conducted at the canals and ponds using water depth and electrical conductivity (EC) sensors to investigate the dynamic relationship between water level and water pollution. It is suggested that in the canals, high EC meant water stagnation and low EC signified river water inflow. Therefore, EC might be a good indicator of water flow change in canals.

Determination of canal leakage potential using continuous resistivity profiling techniques, Interstate and Tri-State Canals, western Nebraska and eastern Wyoming, 2004

USGS Publications Warehouse

Ball, Lyndsay B.; Kress, Wade H.; Steele, Gregory V.; Cannia, James C.; Andersen, Michael J.

2006-01-01

In the North Platte River Basin, a ground-water model is being developed to evaluate the effectiveness of using water leakage from selected irrigation canal systems to enhance ground-water recharge. The U.S. Geological Survey, in cooperation with the North Platte Natural Resources District, used land-based capacitively coupled and water-borne direct-current continuous resistivity profiling techniques to map the lithology of the upper 8 meters and to interpret the relative canal leakage potential of 110 kilometers of the Interstate and Tri-State Canals in western Nebraska and eastern Wyoming. Lithologic descriptions from 25 test holes were used to evaluate the effectiveness of both techniques for indicating relative grain size. An interpretive color scale was developed that symbolizes contrasting resistivity features indicative of different grain-size categories. The color scale was applied to the vertically averaged resistivity and used to classify areas of the canals as having either high, moderate, or low canal leakage potential. When results were compared with the lithologic descriptions, both land-based and water-borne continuous resistivity profiling techniques were determined to be effective at differentiating coarse-grained from fine-grained sediment. Both techniques were useful for producing independent, similar interpretations of canal leakage potential.

Master apical file size - smaller or larger: a systematic review of microbial reduction.

PubMed

Aminoshariae, A; Kulild, J

2015-11-01

The purpose of this systematic review was to determine, in patients undergoing root canal treatment, whether apical enlargement of canals affected microbial reduction. A PICO (population, intervention, comparison and outcome) strategy was developed to identify previously published studies dealing with apical size of canal and microbial reduction. The MEDLINE, Embase, Cochrane and PubMed databases were searched. Additionally, the bibliographies of all relevant articles and textbooks were manually searched. Based on inclusion and exclusion criteria, two reviewers independently selected the relevant articles. Due to the variety of methodologies and different techniques used to measure outcome for master apical file enlargement, it was not possible to standardize the research data and to apply a meta-analysis. Seven articles were identified that met the inclusion criteria. Five of the seven articles generally concluded that canal enlargement reduced bioburden in the root canal system. Two articles reported no difference in canals enlarged to size 25 or 40. The results of the systematic review confirmed that more evidence-based research in this area is needed. With the limited information currently available, the best current available clinical evidence suggests that contemporary chemomechanical debridement techniques with canal enlargement techniques do not eliminate bacteria during root canal treatment at any size. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Prevalence of Enterococcus faecalis in saliva and filled root canals of teeth associated with apical periodontitis

PubMed Central

Wang, Qian-Qian; Zhang, Cheng-Fei; Chu, Chun-Hung; Zhu, Xiao-Fei

2012-01-01

To investigate the prevalence of Enterococcus faecalis in saliva and filled root canals of patients requiring endodontic retreatment for apical periodontitis. Patients with apical periodontitis who were referred for endodontic retreatment were examined. The type and quality of the restoration, symptoms, quality of obturation were recorded. During retreatment, an oral rinse sample and root canal sample were cultured using brain-heart infusion agar and bile esculinazide agar to select for E. faecalis. The 16S rRNA technique was used to identify E. faecalis. A total of 32 women and 22 men (mean age: 38 years; s.d.: 11 years) and 58 teeth were studied. The prevalence of E. faecalis was 19% in the saliva and 38% in the root canals. The odds that root canals harbored E. faecalis were increased if the saliva habored this bacterium (odds ratio=9.7; 95% confidence interval=1.8–51.6; P<0.05). Teeth with unsatisfactory root obturation had more cultivable bacterial species in root canals than teeth with satisfactory root obturation (P<0.05). E. faecalis is more common in root canals of teeth with apical periodontitis than in saliva. The prevalence of E. faecalis in root canals is associated with the presence of E. faecalis in saliva. PMID:22422085

Characteristic findings on panoramic radiography and cone-beam CT to predict paresthesia after extraction of impacted third molar.

PubMed

Harada, Nana; Beloor Vasudeva, Subash; Matsuda, Yukiko; Seki, Kenji; Kapila, Rishabh; Ishikawa, Noboru; Okano, Tomohiro; Sano, Tsukasa

2015-01-01

The purpose of this study was to compare findings on the relationship between impacted molar roots and the mandibular canal in panoramic and three-dimensional cone-beam CT (CBCT) images to identify those that indicated risk of postoperative paresthesia. The relationship between impacted molars and the mandibular canal was first classified using panoramic images. Only patients in whom the molar roots were either in contact with or superimposed on the canal were evaluated using CBCT. Of 466 patients examined using both panoramic and CBCT images, 280 underwent surgical extraction of an impacted molar, and 15 of these (5%) reported postoperative paresthesia. The spatial relationship between the impacted third molar root and the mandibular canal was determined by examining para-sagittal sections (lingual, buccal, inter-radicular, inferior, and combinations) obtained from the canal to the molar root and establishing the proximity of the canal to the molar root (in contact with or without loss of the cortical border and separate). The results revealed that darkening of the roots with interruption of the mandibular canal on panoramic radiographs and the inter-radicular position of the canal in CBCT images were characteristic findings indicative of risk of postoperative paresthesia. These results suggest that careful surgical intervention is required in patients with the above characteristics.

Quantitative evaluation of root canal surface roughness after filing with adaptive reciprocating and continuous rotary instruments.

PubMed

Sakhaei Manesh, Vahid; Giacomin, Paul; Stoll, Richard

2017-06-01

Obtaining clean and smooth root canal walls is the ideal clinical outcome of the cleaning and shaping stage in root canal treatment. This study compares the surface roughness of root canal surfaces instrumented with a NiTi filing system with either adaptive reciprocating (AR) or continuous rotation (CR). Root canal cleaning and shaping was carried out on the mesial canals of 24 extracted first molars roots with either AR or CR. Roots were split in half and the surface roughness of their canals was evaluated in 12 three dimensional roughness reconstructions using a scanning electron microscope. Rz (nm) values were calculated in three areas of each reconstruction and analyzed (α = 0.05). Mann-Whitney tests showed that surface roughness was significantly higher overall in the AR group (Rz = 967 ± 250 nm) compared with the CR group (Rz = 739 ± 239 nm; p = 0.044). The roughness values generally increased from apical towards the coronal third in both groups. A less aggressive finishing file or a continuous rotary system to end the cleaning and shaping stage may be beneficial to reduce roughness of the root canal surface. © 2017 Wiley Periodicals, Inc.

Root anatomy and canal configuration of the permanent mandibular first molar: clinical implications and recommendations.

PubMed

de Pablo, Oliver Valencia; Estevez, Roberto; Heilborn, Carlos; Cohenca, Nestor

2012-01-01

Root canal anatomy may present clinicians with a complex clinical challenge that requires diagnostic approaches, access modification, and clinical skills to successfully localize, negotiate, disinfect, and seal the root canal system. This article discusses the clinical implications of endodontic therapy on permanent mandibular first molars. The number of roots on the mandibular first molar is directly related to ethnicity. Canal morphology has a significant effect on treatment protocol: Mesial roots present two canals on a regular basis, adopting 2-2 and 2-1 as the most common configurations. A third canal is present in 2.6% of the population. The most common configuration in the distal root is type I (62.7%), followed by type II (14.5%) and type IV (12.4%). Diagnosis and treatment of complex root canal systems often require specialized training that may be beyond the scope of the average general practitioner. Access modifications are required to find extra roots and/or canals. The instrumentation of the third root requires a different access and small, flexible instruments, given the curvature that is usually present buccally in the apical third. The incidence of isthmuses is 55% in the mesial root and 20% in the distal root. This anatomical configuration should be taken into consideration during endodontic treatment as well as during periapical surgery.

1. View east at west facade of culvert outlet headwall, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. View east at west facade of culvert outlet headwall, above which part of the canal bank has been removed. Foreground to background: streambed and coffer dam (mound in center) that was used in dewatering the culvert; intake pipes (extreme left and right) for dewatering pumps; deteriorated culvert outlet headwall with upper portion of wall fallen away; horizontal masonry cutoff wall extending above the culvert outlet partially up the canal bank (cutoff wall was exposed by removal of part of canal bank); towpath at top of canal bank. - Delaware & Raritan Canal, Six Mile Run Culvert, .2 mile South of Blackwells Mills Road, East Millstone, Somerset County, NJ

20. 1934 aerial of Tempe Canal, Sections 9, 16, and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. 1934 aerial of Tempe Canal, Sections 9, 16, and 17 (T1N R5E) (top of page is north). The Tempe Crosscut is seen as the dark line entering from top right, which turns north, then curves around the Chandler Falls powerhouse. The canal then curves slowly around to the southwest. The old Trunk Ditch is visible at the top of the curve, coming in from the northeast. A wasteway (top left) runs west from the canal to the Salt River. Photographer: Unknown, 1934. Source: SRP Cartographic Drafting - Tempe Canal, South Side Salt River in Tempe, Mesa & Phoenix, Tempe, Maricopa County, AZ

21. 1934 aerial of Tempe Canal, Sections 19 and 30 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. 1934 aerial of Tempe Canal, Sections 19 and 30 (T1N R5E) and Sections 24 and 25 (T1N R4E) (top of page is north). The main canal enters the picture at upper right and curves out of picture at lower right. The Hayden Branch (thin dark line) runs from top of picture to the southwest, then curves to the west. The Western Branch enters picture running parallel to main canal, then angles off to southwest. Photographer: Unknown, 1934. Source: SRP Cartographic Drafting - Tempe Canal, South Side Salt River in Tempe, Mesa & Phoenix, Tempe, Maricopa County, AZ

Endodontic treatment of a mandibular first molar with three mesial canals and broken instrument removal.

PubMed

Faramarzi, Farhad; Fakhri, Hamidreza; Fakri, Hamidreza; Javaheri, Homan H

2010-04-01

To succeed in any dental procedure, the clinician's awareness of the patient's dental anatomy and its variations is crucial. In endodontic therapy, obtaining full information about the root canals' variations can affect the outcome substantially. This case report presents the endodontic treatment of a mandibular first molar exhibiting three mesial root canals with 4 mm of a separated K-file in the coronal third of the mesiolingual canal on an 18-year-old female patient. This case demonstrates the importance of locating additional canals in any roots undergoing endodontic treatment and how the clinician's awareness of aberrant internal anatomy may change the treatment results.

Endodontic management of mandibular first molars with mid mesial canal: A case series.

PubMed

Nagmode, Pradnya Sunil; Patel, Ankit Vasant; Satpute, Archana Bhaskar; Gupta, Pooja L

2017-01-01

The purpose of this study is to demonstrate the importance of knowledge of the internal anatomy of root canals for the success of endodontic treatment. Lack of knowledge of anatomic variations and their characteristics in different teeth has been pointed out as one of the main cause of endodontic therapy failure. Dental operating microscope plays a key role in the identification of canal and success of endodontic treatment. This case series describes the endodontic treatment of mandibular first molars with extra root canals, evaluate the occurrence of this extra canal, and discuss the importance of their identification and treatment.

1. LOOKING WEST ON LEHIGH CANAL, GRAPHITE MILL IN FOREGROUND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. LOOKING WEST ON LEHIGH CANAL, GRAPHITE MILL IN FOREGROUND - Pettinos Brothers Graphite Manufacturing Mill, On Sand Island, south side of Lehigh Canal, west of Hill-to-Hill Bridge, Bethlehem, Northampton County, PA